From: Frieder Schrempf <frieder@fris.de> To: devicetree@vger.kernel.org, Frieder Schrempf <frieder.schrempf@kontron.de>, Krzysztof Kozlowski <krzk@kernel.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Shawn Guo <shawnguo@kernel.org> Cc: Rob Herring <robh+dt@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de> Subject: [PATCH 0/8] Devicetree fixes and additions for Kontron SL/BL i.MX8MM boards Date: Thu, 30 Sep 2021 17:56:23 +0200 [thread overview] Message-ID: <20210930155633.2745201-1-frieder@fris.de> (raw) From: Frieder Schrempf <frieder.schrempf@kontron.de> This is a set of enhancements and fixes for the devicetrees of the Kontron SL/BL i.MX8MM SoMs and boards. Frieder Schrempf (8): arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on SD card arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct arm64: dts: imx8mm-kontron: Set VDD_SNVS to 800 mV arm64: dts: imx8mm-kontron: Fix reg_rst_eth2 and reg_vdd_5v regulators arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY arm64: dts: imx8mm-kontron: Leave reg_vdd_arm always powered on .../dts/freescale/imx8mm-kontron-n801x-s.dts | 41 ++++++++++++++++--- .../freescale/imx8mm-kontron-n801x-som.dtsi | 13 ++++-- 2 files changed, 44 insertions(+), 10 deletions(-) -- 2.33.0
WARNING: multiple messages have this Message-ID (diff)
From: Frieder Schrempf <frieder@fris.de> To: devicetree@vger.kernel.org, Frieder Schrempf <frieder.schrempf@kontron.de>, Krzysztof Kozlowski <krzk@kernel.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Shawn Guo <shawnguo@kernel.org> Cc: Rob Herring <robh+dt@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de> Subject: [PATCH 0/8] Devicetree fixes and additions for Kontron SL/BL i.MX8MM boards Date: Thu, 30 Sep 2021 17:56:23 +0200 [thread overview] Message-ID: <20210930155633.2745201-1-frieder@fris.de> (raw) From: Frieder Schrempf <frieder.schrempf@kontron.de> This is a set of enhancements and fixes for the devicetrees of the Kontron SL/BL i.MX8MM SoMs and boards. Frieder Schrempf (8): arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on SD card arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct arm64: dts: imx8mm-kontron: Set VDD_SNVS to 800 mV arm64: dts: imx8mm-kontron: Fix reg_rst_eth2 and reg_vdd_5v regulators arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY arm64: dts: imx8mm-kontron: Leave reg_vdd_arm always powered on .../dts/freescale/imx8mm-kontron-n801x-s.dts | 41 ++++++++++++++++--- .../freescale/imx8mm-kontron-n801x-som.dtsi | 13 ++++-- 2 files changed, 44 insertions(+), 10 deletions(-) -- 2.33.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-09-30 15:56 UTC|newest] Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-09-30 15:56 Frieder Schrempf [this message] 2021-09-30 15:56 ` [PATCH 0/8] Devicetree fixes and additions for Kontron SL/BL i.MX8MM boards Frieder Schrempf 2021-09-30 15:56 ` [PATCH 1/8] arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on SD card Frieder Schrempf 2021-09-30 15:56 ` Frieder Schrempf 2021-10-05 6:45 ` Shawn Guo 2021-10-05 6:45 ` Shawn Guo 2021-10-15 10:44 ` Frieder Schrempf 2021-10-15 10:44 ` Frieder Schrempf 2021-09-30 15:56 ` [PATCH 2/8] arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct Frieder Schrempf 2021-09-30 15:56 ` Frieder Schrempf 2021-09-30 16:02 ` Frieder Schrempf 2021-09-30 16:02 ` Frieder Schrempf 2021-10-05 6:49 ` Shawn Guo 2021-10-05 6:49 ` Shawn Guo 2021-10-05 6:53 ` Shawn Guo 2021-10-05 6:53 ` Shawn Guo 2021-10-05 13:10 ` Frieder Schrempf 2021-10-05 13:10 ` Frieder Schrempf 2021-10-15 3:51 ` Shawn Guo 2021-10-15 3:51 ` Shawn Guo 2021-09-30 15:56 ` [PATCH 3/8] arm64: dts: imx8mm-kontron: Set VDD_SNVS to 800 mV Frieder Schrempf 2021-09-30 15:56 ` Frieder Schrempf 2021-10-05 6:56 ` Shawn Guo 2021-10-05 6:56 ` Shawn Guo 2021-10-05 13:14 ` Frieder Schrempf 2021-10-05 13:14 ` Frieder Schrempf 2021-10-15 4:04 ` Shawn Guo 2021-10-15 4:04 ` Shawn Guo 2021-09-30 15:56 ` [PATCH 4/8] arm64: dts: imx8mm-kontron: Fix reg_rst_eth2 and reg_vdd_5v regulators Frieder Schrempf 2021-09-30 15:56 ` Frieder Schrempf 2021-10-05 7:09 ` Shawn Guo 2021-10-05 7:09 ` Shawn Guo 2021-10-05 17:06 ` Frieder Schrempf 2021-10-05 17:06 ` Frieder Schrempf 2021-10-15 4:09 ` Shawn Guo 2021-10-15 4:09 ` Shawn Guo 2021-10-15 11:32 ` Frieder Schrempf 2021-10-15 11:32 ` Frieder Schrempf 2021-09-30 15:56 ` [PATCH 5/8] arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency Frieder Schrempf 2021-09-30 15:56 ` Frieder Schrempf 2021-10-05 7:12 ` Shawn Guo 2021-10-05 7:12 ` Shawn Guo 2021-10-05 17:17 ` Frieder Schrempf 2021-10-05 17:17 ` Frieder Schrempf 2021-10-15 4:12 ` Shawn Guo 2021-10-15 4:12 ` Shawn Guo 2021-09-30 15:56 ` [PATCH 6/8] arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY Frieder Schrempf 2021-10-02 18:14 ` Heiko Thiery 2021-10-02 18:08 ` Heiko Thiery 2021-10-05 7:20 ` Shawn Guo 2021-10-05 7:20 ` Shawn Guo 2021-09-30 15:56 ` [PATCH 7/8] arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY Frieder Schrempf 2021-09-30 15:56 ` Frieder Schrempf 2021-09-30 15:56 ` [PATCH 8/8] arm64: dts: imx8mm-kontron: Leave reg_vdd_arm always powered on Frieder Schrempf 2021-09-30 15:56 ` Frieder Schrempf 2021-09-30 18:52 ` Heiko Thiery 2021-09-30 18:52 ` Heiko Thiery 2021-10-05 7:27 ` Shawn Guo 2021-10-05 7:27 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210930155633.2745201-1-frieder@fris.de \ --to=frieder@fris.de \ --cc=devicetree@vger.kernel.org \ --cc=frieder.schrempf@kontron.de \ --cc=krzk@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.