[PATCH 1/6] arm: Remove flea3 board

* [PATCH 1/6] arm: Remove flea3 board
@ 2021-09-09 11:54 Tom Rini
  2021-09-09 11:54 ` [PATCH 2/6] arm: Remove aspenite board Tom Rini
                   ` (5 more replies)
  0 siblings, 6 replies; 18+ messages in thread
From: Tom Rini @ 2021-09-09 11:54 UTC (permalink / raw)
  To: u-boot; +Cc: Stefano Babic

This board has not been converted to CONFIG_DM by the deadline.
Remove it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
 arch/arm/Kconfig                        |   6 -
 board/CarMediaLab/flea3/Kconfig         |  15 --
 board/CarMediaLab/flea3/MAINTAINERS     |   6 -
 board/CarMediaLab/flea3/Makefile        |   8 -
 board/CarMediaLab/flea3/flea3.c         | 227 ------------------------
 board/CarMediaLab/flea3/lowlevel_init.S |  24 ---
 configs/flea3_defconfig                 |  58 ------
 drivers/serial/Kconfig                  |   3 +-
 include/configs/flea3.h                 | 155 ----------------
 9 files changed, 1 insertion(+), 501 deletions(-)
 delete mode 100644 board/CarMediaLab/flea3/Kconfig
 delete mode 100644 board/CarMediaLab/flea3/MAINTAINERS
 delete mode 100644 board/CarMediaLab/flea3/Makefile
 delete mode 100644 board/CarMediaLab/flea3/flea3.c
 delete mode 100644 board/CarMediaLab/flea3/lowlevel_init.S
 delete mode 100644 configs/flea3_defconfig
 delete mode 100644 include/configs/flea3.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 21f17c202f6c..909a308970b7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -568,11 +568,6 @@ config TARGET_STV0991
 	select SPI_FLASH
 	imply CMD_DM
 
-config TARGET_FLEA3
-	bool "Support flea3"
-	select CPU_ARM1136
-	select GPIO_EXTRA_HEADER
-
 config ARCH_BCM283X
 	bool "Broadcom BCM283X family"
 	select DM
@@ -2107,7 +2102,6 @@ source "board/armltd/total_compute/Kconfig"
 
 source "board/bosch/shc/Kconfig"
 source "board/bosch/guardian/Kconfig"
-source "board/CarMediaLab/flea3/Kconfig"
 source "board/Marvell/aspenite/Kconfig"
 source "board/Marvell/octeontx/Kconfig"
 source "board/Marvell/octeontx2/Kconfig"
diff --git a/board/CarMediaLab/flea3/Kconfig b/board/CarMediaLab/flea3/Kconfig
deleted file mode 100644
index 7113f2b51f6a..000000000000
--- a/board/CarMediaLab/flea3/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_FLEA3
-
-config SYS_BOARD
-	default "flea3"
-
-config SYS_VENDOR
-	default "CarMediaLab"
-
-config SYS_SOC
-	default "mx35"
-
-config SYS_CONFIG_NAME
-	default "flea3"
-
-endif
diff --git a/board/CarMediaLab/flea3/MAINTAINERS b/board/CarMediaLab/flea3/MAINTAINERS
deleted file mode 100644
index c7b0df7bc429..000000000000
--- a/board/CarMediaLab/flea3/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-FLEA3 BOARD
-M:	Stefano Babic <sbabic@denx.de>
-S:	Maintained
-F:	board/CarMediaLab/flea3/
-F:	include/configs/flea3.h
-F:	configs/flea3_defconfig
diff --git a/board/CarMediaLab/flea3/Makefile b/board/CarMediaLab/flea3/Makefile
deleted file mode 100644
index edaac8683b36..000000000000
--- a/board/CarMediaLab/flea3/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
-#
-# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
-
-obj-y	:= flea3.o
-obj-y	+= lowlevel_init.o
diff --git a/board/CarMediaLab/flea3/flea3.c b/board/CarMediaLab/flea3/flea3.c
deleted file mode 100644
index ecd70ecbdc41..000000000000
--- a/board/CarMediaLab/flea3/flea3.c
+++ /dev/null
@@ -1,227 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011, Stefano Babic <sbabic@denx.de>
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <env.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/iomux-mx35.h>
-#include <i2c.h>
-#include <linux/types.h>
-#include <asm/gpio.h>
-#include <asm/arch/sys_proto.h>
-#include <netdev.h>
-#include <fdt_support.h>
-#include <mtd_node.h>
-#include <jffs2/load_kernel.h>
-
-#ifndef CONFIG_BOARD_EARLY_INIT_F
-#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
-#endif
-
-#define CCM_CCMR_CONFIG		0x003F4208
-
-#define ESDCTL_DDR2_CONFIG	0x007FFC3F
-
-static inline void dram_wait(unsigned int count)
-{
-	volatile unsigned int wait = count;
-
-	while (wait--)
-		;
-}
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
-		PHYS_SDRAM_1_SIZE);
-
-	return 0;
-}
-
-static void board_setup_sdram(void)
-{
-	struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
-
-	/* Initialize with default values both CSD0/1 */
-	writel(0x2000, &esdc->esdctl0);
-	writel(0x2000, &esdc->esdctl1);
-
-
-	mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG,
-			     13, 10, 2, 0x8080);
-}
-
-static void setup_iomux_uart3(void)
-{
-	static const iomux_v3_cfg_t uart3_pads[] = {
-		MX35_PAD_RTS2__UART3_RXD_MUX,
-		MX35_PAD_CTS2__UART3_TXD_MUX,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
-}
-
-#define I2C_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE)
-
-static void setup_iomux_i2c(void)
-{
-	static const iomux_v3_cfg_t i2c_pads[] = {
-		NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL),
-
-		NEW_PAD_CTRL(MX35_PAD_TX3_RX2__I2C3_SCL, I2C_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_TX2_RX3__I2C3_SDA, I2C_PAD_CTRL),
-	};
-
-	imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
-}
-
-
-static void setup_iomux_spi(void)
-{
-	static const iomux_v3_cfg_t spi_pads[] = {
-		MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
-		MX35_PAD_CSPI1_MISO__CSPI1_MISO,
-		MX35_PAD_CSPI1_SS0__CSPI1_SS0,
-		MX35_PAD_CSPI1_SS1__CSPI1_SS1,
-		MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
-}
-
-static void setup_iomux_fec(void)
-{
-	static const iomux_v3_cfg_t fec_pads[] = {
-		MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-		MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-		MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-		MX35_PAD_FEC_COL__FEC_COL,
-		MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-		MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-		MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-		MX35_PAD_FEC_MDC__FEC_MDC,
-		MX35_PAD_FEC_MDIO__FEC_MDIO,
-		MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-		MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-		MX35_PAD_FEC_CRS__FEC_CRS,
-		MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-		MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-		MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-		MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-		MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-		MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-		/* GPIO used to power off ethernet */
-		MX35_PAD_STXFS4__GPIO2_31,
-	};
-
-	/* setup pins for FEC */
-	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-}
-
-int board_early_init_f(void)
-{
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-
-	/* setup GPIO3_1 to set HighVCore signal */
-	imx_iomux_v3_setup_pad(MX35_PAD_ATA_DA1__GPIO3_1);
-	gpio_direction_output(65, 1);
-
-	/* initialize PLL and clock configuration */
-	writel(CCM_CCMR_CONFIG, &ccm->ccmr);
-
-	writel(CCM_MPLL_532_HZ, &ccm->mpctl);
-	writel(CCM_PPLL_300_HZ, &ccm->ppctl);
-
-	/* Set the core to run at 532 Mhz */
-	writel(0x00001000, &ccm->pdr0);
-
-	/* Set-up RAM */
-	board_setup_sdram();
-
-	/* enable clocks */
-	writel(readl(&ccm->cgr0) |
-		MXC_CCM_CGR0_EMI_MASK |
-		MXC_CCM_CGR0_EDIO_MASK |
-		MXC_CCM_CGR0_EPIT1_MASK,
-		&ccm->cgr0);
-
-	writel(readl(&ccm->cgr1) |
-		MXC_CCM_CGR1_FEC_MASK |
-		MXC_CCM_CGR1_GPIO1_MASK |
-		MXC_CCM_CGR1_GPIO2_MASK |
-		MXC_CCM_CGR1_GPIO3_MASK |
-		MXC_CCM_CGR1_I2C1_MASK |
-		MXC_CCM_CGR1_I2C2_MASK |
-		MXC_CCM_CGR1_I2C3_MASK,
-		&ccm->cgr1);
-
-	/* Set-up NAND */
-	__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
-
-	/* Set pinmux for the required peripherals */
-	setup_iomux_uart3();
-	setup_iomux_i2c();
-	setup_iomux_fec();
-	setup_iomux_spi();
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	/* Enable power for ethernet */
-	gpio_direction_output(63, 0);
-
-	udelay(2000);
-
-	return 0;
-}
-
-#ifdef CONFIG_REVISION_TAG
-u32 get_board_rev(void)
-{
-	int rev = 0;
-
-	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
-}
-#endif
-
-/*
- * called prior to booting kernel or by 'fdt boardsetup' command
- *
- */
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	static const struct node_info nodes[] = {
-		{ "physmap-flash.0", MTD_DEV_TYPE_NOR, },  /* NOR flash */
-		{ "mxc_nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
-	};
-
-	if (env_get("fdt_noauto")) {
-		puts("   Skiping ft_board_setup (fdt_noauto defined)\n");
-		return 0;
-	}
-
-	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
-
-	return 0;
-}
diff --git a/board/CarMediaLab/flea3/lowlevel_init.S b/board/CarMediaLab/flea3/lowlevel_init.S
deleted file mode 100644
index 8186b3922bad..000000000000
--- a/board/CarMediaLab/flea3/lowlevel_init.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011, Stefano Babic <sbabic@denx.de>
- */
-
-#include <config.h>
-#include <asm/arch/lowlevel_macro.S>
-
-.globl lowlevel_init
-lowlevel_init:
-
-	core_init
-
-	init_aips
-
-	init_max
-
-	init_m3if
-
-	mov pc, lr
diff --git a/configs/flea3_defconfig b/configs/flea3_defconfig
deleted file mode 100644
index 81e291a94160..000000000000
--- a/configs/flea3_defconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_TARGET_FLEA3=y
-CONFIG_SYS_TEXT_BASE=0xA0000000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_SYS_MALLOC_LEN=0x110000
-CONFIG_SYS_LOAD_ADDR=0x80800000
-CONFIG_FIT=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="flea3 U-Boot > "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand,nor0=physmap-flash.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:50m(root1),32m(rootfb),64m(pcache),64m(app1),10m(app2),-(spool);physmap-flash.0:512k(u-boot),64k(env1),64k(env2),3776k(kernel1),3776k(kernel2)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xA0080000
-CONFIG_ENV_ADDR_REDUND=0xA0090000
-CONFIG_MXC_GPIO=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_SYS_MXC_I2C3_SLAVE=0xfe
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ8XXX=y
-CONFIG_MII=y
-CONFIG_MXC_UART=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 36ee43210a9f..cbea165b9d54 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -645,8 +645,7 @@ config MCFUART
 
 config MXC_UART
 	bool "IMX serial port support"
-	depends on ARCH_MX25 || ARCH_MX31 || TARGET_FLEA3 \
-		|| MX5 || MX6 || MX7 || IMX8M
+	depends on ARCH_MX25 || ARCH_MX31 || MX5 || MX6 || MX7 || IMX8M
 	help
 	  If you have a machine based on a Motorola IMX CPU you
 	  can enable its onboard serial port by enabling this option.
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
deleted file mode 100644
index 6c3b2c4bf554..000000000000
--- a/include/configs/flea3.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * Configuration for the flea3 board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
- /* High Level Configuration Options */
-#define CONFIG_MX35
-
-/* Set TEXT at the beginning of the NOR flash */
-
-/* This is required to setup the ESDC controller */
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_SPD_BUS_NUM		2 /* I2C3 */
-
-/*
- * UART (console)
- */
-#define CONFIG_MXC_UART_BASE	UART3_BASE
-
-/*
- * Command definition
- */
-
-#define CONFIG_NET_RETRY_COUNT	100
-
-/*
- * Ethernet on SOC (FEC)
- */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE	FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR	0x1
-
-#define CONFIG_ARP_TIMEOUT	200UL
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_CBSIZE	512	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	32	/* max number of command args */
-
-/*
- * Physical Memory Map
- */
-#define PHYS_SDRAM_1		CSD0_BASE_ADDR
-#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR + 0x10000)
-#define CONFIG_SYS_INIT_RAM_SIZE		(IRAM_SIZE / 2)
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					CONFIG_SYS_GBL_DATA_OFFSET)
-
-/*
- * MTD Command for mtdparts
- */
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE		CS0_BASE_ADDR
-#define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512	/* max number of sectors on one chip */
-/* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-
-/* Address and size of Redundant Environment Sector	*/
-
-/*
- * CFI FLASH driver setup
- */
-
-/* A non-standard buffered write algorithm */
-
-/*
- * NAND FLASH driver setup
- */
-#define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_NAND_LARGEPAGE
-
-/*
- * Default environment and default scripts
- * to update uboot and load kernel
- */
-
-#define CONFIG_HOSTNAME "flea3"
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip_sta=setenv bootargs ${bootargs} "			\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
-	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
-		"else run addip_sta;fi\0"				\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=ttymxc2,${baudrate}\0"			\
-	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
-	"loadaddr=80800000\0"						\
-	"kernel_addr_r=80800000\0"					\
-	"hostname=" CONFIG_HOSTNAME "\0"			\
-	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
-	"ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"	\
-	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr}\0"				\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
-		"run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r}\0"				\
-	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
-		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
-	"net_self=if run net_self_load;then "				\
-		"run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
-		"else echo Images not loades;fi\0"			\
-	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
-	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
-	"update=protect off ${uboot_addr} +80000;"			\
-		"erase ${uboot_addr} +80000;"				\
-		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
-	"upd=if run load;then echo Updating u-boot;if run update;"	\
-		"then echo U-Boot updated;"				\
-			"else echo Error updating u-boot !;"		\
-			"echo Board without bootloader !!;"		\
-		"fi;"							\
-		"else echo U-Boot not downloaded..exiting;fi\0"		\
-	"bootcmd=run net_nfs\0"
-
-#endif				/* __CONFIG_H */
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 18+ messages in thread