From: "Paweł Anikiel" <pan@semihalf.com>
To: jarkko.nikula@linux.intel.com, andriy.shevchenko@linux.intel.com,
mika.westerberg@linux.intel.com, robh+dt@kernel.org,
p.zabel@pengutronix.de, arnd@arndb.de, olof@lixom.net,
soc@kernel.org, dinguyen@kernel.org, p.yadav@ti.com,
Tudor.Ambarus@microchip.com
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
alexandre.belloni@bootlin.com, sre@kernel.org,
thunder.leizhen@huawei.com, Jonathan.Cameron@huawei.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
ka@semihalf.com, tn@semihalf.com, jam@semihalf.com,
amstan@google.com, "Paweł Anikiel" <pan@semihalf.com>
Subject: [PATCH v2 0/4] Add support for the Mercury+ AA1 module
Date: Tue, 5 Oct 2021 16:37:44 +0200 [thread overview]
Message-ID: <20211005143748.2471647-1-pan@semihalf.com> (raw)
The following patches add support for the Mercury+ AA1 with an
Arria 10 SoCFPGA.
This version differs from the previous one by removing the spi
flash node, renaming the memory and mdio nodes, adding gpio nodes,
and adding a bus number property to Synopsys DesignWare i2c
controller node.
Paweł Anikiel (4):
i2c: check bus number property in DesignWare I2C Controller
dt-bindings: add bus number property
reset: socfpga: add empty driver allowing consumers to probe
dts: socfpga: Add Mercury+ AA1 devicetree
.../bindings/i2c/snps,designware-i2c.yaml | 5 +
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/socfpga_arria10_mercury_aa1.dts | 99 +++++++++++++++++++
drivers/i2c/busses/i2c-designware-platdrv.c | 3 +-
drivers/reset/reset-socfpga.c | 26 +++++
5 files changed, 133 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: "Paweł Anikiel" <pan@semihalf.com>
To: jarkko.nikula@linux.intel.com, andriy.shevchenko@linux.intel.com,
mika.westerberg@linux.intel.com, robh+dt@kernel.org,
p.zabel@pengutronix.de, arnd@arndb.de, olof@lixom.net,
soc@kernel.org, dinguyen@kernel.org, p.yadav@ti.com,
Tudor.Ambarus@microchip.com
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
alexandre.belloni@bootlin.com, sre@kernel.org,
thunder.leizhen@huawei.com, Jonathan.Cameron@huawei.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
ka@semihalf.com, tn@semihalf.com, jam@semihalf.com,
amstan@google.com, "Paweł Anikiel" <pan@semihalf.com>
Subject: [PATCH v2 0/4] Add support for the Mercury+ AA1 module
Date: Tue, 5 Oct 2021 16:37:44 +0200 [thread overview]
Message-ID: <20211005143748.2471647-1-pan@semihalf.com> (raw)
Message-ID: <20211005143744.Ya-FNxPYj6F7VrdWeF9qPn7E8MK-ZAw5BpQ_41CqBLY@z> (raw)
The following patches add support for the Mercury+ AA1 with an
Arria 10 SoCFPGA.
This version differs from the previous one by removing the spi
flash node, renaming the memory and mdio nodes, adding gpio nodes,
and adding a bus number property to Synopsys DesignWare i2c
controller node.
Paweł Anikiel (4):
i2c: check bus number property in DesignWare I2C Controller
dt-bindings: add bus number property
reset: socfpga: add empty driver allowing consumers to probe
dts: socfpga: Add Mercury+ AA1 devicetree
.../bindings/i2c/snps,designware-i2c.yaml | 5 +
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/socfpga_arria10_mercury_aa1.dts | 99 +++++++++++++++++++
drivers/i2c/busses/i2c-designware-platdrv.c | 3 +-
drivers/reset/reset-socfpga.c | 26 +++++
5 files changed, 133 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-10-05 14:38 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-05 14:37 Paweł Anikiel [this message]
2021-10-05 14:37 ` [PATCH v2 0/4] Add support for the Mercury+ AA1 module Paweł Anikiel
2021-10-05 14:37 ` [PATCH v2 1/4] i2c: check bus number property in DesignWare I2C Controller Paweł Anikiel
2021-10-05 14:37 ` Paweł Anikiel
2021-10-05 16:19 ` Andy Shevchenko
2021-10-05 16:19 ` Andy Shevchenko
2021-10-05 14:37 ` [PATCH v2 2/4] dt-bindings: add bus number property Paweł Anikiel
2021-10-14 16:46 ` Rob Herring
2021-10-14 16:46 ` Rob Herring
2021-10-05 14:37 ` Paweł Anikiel
2021-10-05 14:37 ` Paweł Anikiel
2021-10-05 16:22 ` Arnd Bergmann
2021-10-05 16:22 ` Arnd Bergmann
2021-10-05 16:28 ` Alexandre Belloni
2021-10-05 16:28 ` Alexandre Belloni
2021-10-06 9:21 ` Paweł Anikiel
2021-10-06 9:41 ` Arnd Bergmann
2021-10-06 9:41 ` Arnd Bergmann
2021-10-06 9:29 ` Paweł Anikiel
2021-10-06 9:29 ` Paweł Anikiel
2021-10-05 14:37 ` [PATCH v2 3/4] reset: socfpga: add empty driver allowing consumers to probe Paweł Anikiel
2021-10-05 14:37 ` Paweł Anikiel
2021-10-05 14:37 ` [PATCH v2 4/4] dts: socfpga: Add Mercury+ AA1 devicetree Paweł Anikiel
2021-10-05 14:37 ` Paweł Anikiel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211005143748.2471647-1-pan@semihalf.com \
--to=pan@semihalf.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=amstan@google.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@kernel.org \
--cc=jam@semihalf.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=ka@semihalf.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=olof@lixom.net \
--cc=p.yadav@ti.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=soc@kernel.org \
--cc=sre@kernel.org \
--cc=thunder.leizhen@huawei.com \
--cc=tn@semihalf.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.