* [PATCH v2 1/4] dt-bindings: reset: add dt binding header for Mediatek MT7621 resets
2021-10-06 11:23 [PATCH v2 0/4] clk: ralink: make system controller a reset provider Sergio Paracuellos
@ 2021-10-06 11:23 ` Sergio Paracuellos
2021-10-14 18:26 ` Rob Herring
2021-10-06 11:23 ` [PATCH v2 2/4] dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property Sergio Paracuellos
` (3 subsequent siblings)
4 siblings, 1 reply; 9+ messages in thread
From: Sergio Paracuellos @ 2021-10-06 11:23 UTC (permalink / raw)
To: sboyd
Cc: linux-clk, gregkh, devicetree, robh+dt, linux-staging, neil,
linux-kernel, john
Add dt binding header for resets lines in Mediatek MT7621 SoCs.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
include/dt-bindings/reset/mt7621-reset.h | 37 ++++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 include/dt-bindings/reset/mt7621-reset.h
diff --git a/include/dt-bindings/reset/mt7621-reset.h b/include/dt-bindings/reset/mt7621-reset.h
new file mode 100644
index 000000000000..7572c6b41453
--- /dev/null
+++ b/include/dt-bindings/reset/mt7621-reset.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021 Sergio Paracuellos
+ * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+ */
+
+#ifndef DT_BINDING_MT7621_RESET_H
+#define DT_BINDING_MT7621_RESET_H
+
+#define MT7621_RST_SYS 0
+#define MT7621_RST_MCM 2
+#define MT7621_RST_HSDMA 5
+#define MT7621_RST_FE 6
+#define MT7621_RST_SPDIFTX 7
+#define MT7621_RST_TIMER 8
+#define MT7621_RST_INT 9
+#define MT7621_RST_MC 10
+#define MT7621_RST_PCM 11
+#define MT7621_RST_PIO 13
+#define MT7621_RST_GDMA 14
+#define MT7621_RST_NFI 15
+#define MT7621_RST_I2C 16
+#define MT7621_RST_I2S 17
+#define MT7621_RST_SPI 18
+#define MT7621_RST_UART1 19
+#define MT7621_RST_UART2 20
+#define MT7621_RST_UART3 21
+#define MT7621_RST_ETH 23
+#define MT7621_RST_PCIE0 24
+#define MT7621_RST_PCIE1 25
+#define MT7621_RST_PCIE2 26
+#define MT7621_RST_AUX_STCK 28
+#define MT7621_RST_CRYPTO 29
+#define MT7621_RST_SDXC 30
+#define MT7621_RST_PPE 31
+
+#endif /* DT_BINDING_MT7621_RESET_H */
--
2.33.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v2 1/4] dt-bindings: reset: add dt binding header for Mediatek MT7621 resets
2021-10-06 11:23 ` [PATCH v2 1/4] dt-bindings: reset: add dt binding header for Mediatek MT7621 resets Sergio Paracuellos
@ 2021-10-14 18:26 ` Rob Herring
0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-10-14 18:26 UTC (permalink / raw)
To: Sergio Paracuellos
Cc: robh+dt, linux-kernel, gregkh, linux-staging, devicetree, neil,
sboyd, john, linux-clk
On Wed, 06 Oct 2021 13:23:03 +0200, Sergio Paracuellos wrote:
> Add dt binding header for resets lines in Mediatek MT7621 SoCs.
>
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> ---
> include/dt-bindings/reset/mt7621-reset.h | 37 ++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
> create mode 100644 include/dt-bindings/reset/mt7621-reset.h
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 2/4] dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property
2021-10-06 11:23 [PATCH v2 0/4] clk: ralink: make system controller a reset provider Sergio Paracuellos
2021-10-06 11:23 ` [PATCH v2 1/4] dt-bindings: reset: add dt binding header for Mediatek MT7621 resets Sergio Paracuellos
@ 2021-10-06 11:23 ` Sergio Paracuellos
2021-10-14 18:27 ` Rob Herring
2021-10-06 11:23 ` [PATCH v2 3/4] clk: ralink: make system controller node a reset provider Sergio Paracuellos
` (2 subsequent siblings)
4 siblings, 1 reply; 9+ messages in thread
From: Sergio Paracuellos @ 2021-10-06 11:23 UTC (permalink / raw)
To: sboyd
Cc: linux-clk, gregkh, devicetree, robh+dt, linux-staging, neil,
linux-kernel, john
Make system controller a reset provider for all the peripherals in the
MT7621 SoC adding '#reset-cells' property.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
.../bindings/clock/mediatek,mt7621-sysc.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
index 915f84efd763..0c0b0ae5e2ac 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
@@ -22,6 +22,11 @@ description: |
The clocks are provided inside a system controller node.
+ This node is also a reset provider for all the peripherals.
+
+ Reset related bits are defined in:
+ [2]: <include/dt-bindings/reset/mt7621-reset.h>.
+
properties:
compatible:
items:
@@ -37,6 +42,12 @@ properties:
clocks.
const: 1
+ "#reset-cells":
+ description:
+ The first cell indicates the reset bit within the register, see
+ [2] for available resets.
+ const: 1
+
ralink,memctl:
$ref: /schemas/types.yaml#/definitions/phandle
description:
@@ -61,6 +72,7 @@ examples:
compatible = "mediatek,mt7621-sysc", "syscon";
reg = <0x0 0x100>;
#clock-cells = <1>;
+ #reset-cells = <1>;
ralink,memctl = <&memc>;
clock-output-names = "xtal", "cpu", "bus",
"50m", "125m", "150m",
--
2.33.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v2 2/4] dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property
2021-10-06 11:23 ` [PATCH v2 2/4] dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property Sergio Paracuellos
@ 2021-10-14 18:27 ` Rob Herring
0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-10-14 18:27 UTC (permalink / raw)
To: Sergio Paracuellos
Cc: linux-clk, linux-kernel, devicetree, robh+dt, linux-staging,
gregkh, john, sboyd, neil
On Wed, 06 Oct 2021 13:23:04 +0200, Sergio Paracuellos wrote:
> Make system controller a reset provider for all the peripherals in the
> MT7621 SoC adding '#reset-cells' property.
>
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> ---
> .../bindings/clock/mediatek,mt7621-sysc.yaml | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 3/4] clk: ralink: make system controller node a reset provider
2021-10-06 11:23 [PATCH v2 0/4] clk: ralink: make system controller a reset provider Sergio Paracuellos
2021-10-06 11:23 ` [PATCH v2 1/4] dt-bindings: reset: add dt binding header for Mediatek MT7621 resets Sergio Paracuellos
2021-10-06 11:23 ` [PATCH v2 2/4] dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property Sergio Paracuellos
@ 2021-10-06 11:23 ` Sergio Paracuellos
2021-10-06 11:23 ` [PATCH v2 4/4] staging: mt7621-dts: align resets with binding documentation Sergio Paracuellos
2021-10-17 6:51 ` [PATCH v2 0/4] clk: ralink: make system controller a reset provider Sergio Paracuellos
4 siblings, 0 replies; 9+ messages in thread
From: Sergio Paracuellos @ 2021-10-06 11:23 UTC (permalink / raw)
To: sboyd
Cc: linux-clk, gregkh, devicetree, robh+dt, linux-staging, neil,
linux-kernel, john
MT7621 system controller node is already providing the clocks for the whole
system but must also serve as a reset provider. Hence, add reset controller
related code to the clock driver itself.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
drivers/clk/ralink/clk-mt7621.c | 79 +++++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/drivers/clk/ralink/clk-mt7621.c b/drivers/clk/ralink/clk-mt7621.c
index a2c045390f00..7a474bb4c877 100644
--- a/drivers/clk/ralink/clk-mt7621.c
+++ b/drivers/clk/ralink/clk-mt7621.c
@@ -11,14 +11,17 @@
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <linux/reset-controller.h>
#include <linux/slab.h>
#include <dt-bindings/clock/mt7621-clk.h>
+#include <dt-bindings/reset/mt7621-reset.h>
/* Configuration registers */
#define SYSC_REG_SYSTEM_CONFIG0 0x10
#define SYSC_REG_SYSTEM_CONFIG1 0x14
#define SYSC_REG_CLKCFG0 0x2c
#define SYSC_REG_CLKCFG1 0x30
+#define SYSC_REG_RESET_CTRL 0x34
#define SYSC_REG_CUR_CLK_STS 0x44
#define MEMC_REG_CPU_PLL 0x648
@@ -398,6 +401,76 @@ static void __init mt7621_clk_init(struct device_node *node)
}
CLK_OF_DECLARE_DRIVER(mt7621_clk, "mediatek,mt7621-sysc", mt7621_clk_init);
+struct mt7621_rst {
+ struct reset_controller_dev rcdev;
+ struct regmap *sysc;
+};
+
+static struct mt7621_rst *to_mt7621_rst(struct reset_controller_dev *dev)
+{
+ return container_of(dev, struct mt7621_rst, rcdev);
+}
+
+static int mt7621_assert_device(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mt7621_rst *data = to_mt7621_rst(rcdev);
+ struct regmap *sysc = data->sysc;
+
+ if (id == MT7621_RST_SYS)
+ return -EINVAL;
+
+ return regmap_update_bits(sysc, SYSC_REG_RESET_CTRL, BIT(id), BIT(id));
+}
+
+static int mt7621_deassert_device(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mt7621_rst *data = to_mt7621_rst(rcdev);
+ struct regmap *sysc = data->sysc;
+
+ if (id == MT7621_RST_SYS)
+ return -EINVAL;
+
+ return regmap_update_bits(sysc, SYSC_REG_RESET_CTRL, BIT(id), 0);
+}
+
+static int mt7621_reset_device(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ int ret;
+
+ ret = mt7621_assert_device(rcdev, id);
+ if (ret < 0)
+ return ret;
+
+ return mt7621_deassert_device(rcdev, id);
+}
+
+static const struct reset_control_ops reset_ops = {
+ .reset = mt7621_reset_device,
+ .assert = mt7621_assert_device,
+ .deassert = mt7621_deassert_device
+};
+
+static int mt7621_reset_init(struct device *dev, struct regmap *sysc)
+{
+ struct mt7621_rst *rst_data;
+
+ rst_data = devm_kzalloc(dev, sizeof(*rst_data), GFP_KERNEL);
+ if (!rst_data)
+ return -ENOMEM;
+
+ rst_data->sysc = sysc;
+ rst_data->rcdev.ops = &reset_ops;
+ rst_data->rcdev.owner = THIS_MODULE;
+ rst_data->rcdev.nr_resets = 32;
+ rst_data->rcdev.of_reset_n_cells = 1;
+ rst_data->rcdev.of_node = dev_of_node(dev);
+
+ return devm_reset_controller_register(dev, &rst_data->rcdev);
+}
+
static int mt7621_clk_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -424,6 +497,12 @@ static int mt7621_clk_probe(struct platform_device *pdev)
return ret;
}
+ ret = mt7621_reset_init(dev, priv->sysc);
+ if (ret) {
+ pr_err("Could not init reset controller\n");
+ return ret;
+ }
+
count = ARRAY_SIZE(mt7621_clks_base) +
ARRAY_SIZE(mt7621_fixed_clks) + ARRAY_SIZE(mt7621_gates);
clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, count),
--
2.33.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v2 4/4] staging: mt7621-dts: align resets with binding documentation
2021-10-06 11:23 [PATCH v2 0/4] clk: ralink: make system controller a reset provider Sergio Paracuellos
` (2 preceding siblings ...)
2021-10-06 11:23 ` [PATCH v2 3/4] clk: ralink: make system controller node a reset provider Sergio Paracuellos
@ 2021-10-06 11:23 ` Sergio Paracuellos
2021-10-17 6:51 ` [PATCH v2 0/4] clk: ralink: make system controller a reset provider Sergio Paracuellos
4 siblings, 0 replies; 9+ messages in thread
From: Sergio Paracuellos @ 2021-10-06 11:23 UTC (permalink / raw)
To: sboyd
Cc: linux-clk, gregkh, devicetree, robh+dt, linux-staging, neil,
linux-kernel, john
Binding documentation for compatible 'mediatek,mt7621-sysc' has been updated
to be used as a reset provider. Align reset related bits and system controller
node with binding documentation along the dtsi file.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
drivers/staging/mt7621-dts/mt7621.dtsi | 27 ++++++++++++--------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index 719ef28171f4..72b99d8b4647 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -1,6 +1,7 @@
#include <dt-bindings/interrupt-controller/mips-gic.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/mt7621-clk.h>
+#include <dt-bindings/reset/mt7621-reset.h>
/ {
#address-cells = <1>;
@@ -59,6 +60,7 @@ sysc: syscon@0 {
compatible = "mediatek,mt7621-sysc", "syscon";
reg = <0x0 0x100>;
#clock-cells = <1>;
+ #reset-cells = <1>;
ralink,memctl = <&memc>;
clock-output-names = "xtal", "cpu", "bus",
"50m", "125m", "150m",
@@ -88,7 +90,7 @@ i2c: i2c@900 {
clocks = <&sysc MT7621_CLK_I2C>;
clock-names = "i2c";
- resets = <&rstctrl 16>;
+ resets = <&sysc MT7621_RST_I2C>;
reset-names = "i2c";
#address-cells = <1>;
@@ -106,7 +108,7 @@ i2s: i2s@a00 {
clocks = <&sysc MT7621_CLK_I2S>;
clock-names = "i2s";
- resets = <&rstctrl 17>;
+ resets = <&sysc MT7621_RST_I2S>;
reset-names = "i2s";
interrupt-parent = <&gic>;
@@ -151,7 +153,7 @@ spi0: spi@b00 {
clocks = <&sysc MT7621_CLK_SPI>;
clock-names = "spi";
- resets = <&rstctrl 18>;
+ resets = <&sysc MT7621_RST_SPI>;
reset-names = "spi";
#address-cells = <1>;
@@ -167,7 +169,7 @@ gdma: gdma@2800 {
clocks = <&sysc MT7621_CLK_GDMA>;
clock-names = "gdma";
- resets = <&rstctrl 14>;
+ resets = <&sysc MT7621_RST_GDMA>;
reset-names = "dma";
interrupt-parent = <&gic>;
@@ -186,7 +188,7 @@ hsdma: hsdma@7000 {
clocks = <&sysc MT7621_CLK_HSDMA>;
clock-names = "hsdma";
- resets = <&rstctrl 5>;
+ resets = <&sysc MT7621_RST_HSDMA>;
reset-names = "hsdma";
interrupt-parent = <&gic>;
@@ -286,11 +288,6 @@ pinmux {
};
};
- rstctrl: rstctrl {
- compatible = "ralink,rt2880-reset";
- #reset-cells = <1>;
- };
-
sdhci: sdhci@1E130000 {
status = "disabled";
@@ -383,7 +380,7 @@ ethernet: ethernet@1e100000 {
#address-cells = <1>;
#size-cells = <0>;
- resets = <&rstctrl 6 &rstctrl 23>;
+ resets = <&sysc MT7621_CLK_FE &sysc MT7621_CLK_ETH>;
reset-names = "fe", "eth";
interrupt-parent = <&gic>;
@@ -428,7 +425,7 @@ switch0: switch0@0 {
#size-cells = <0>;
reg = <0>;
mediatek,mcm;
- resets = <&rstctrl 2>;
+ resets = <&sysc MT7621_RST_MCM>;
reset-names = "mcm";
interrupt-controller;
#interrupt-cells = <1>;
@@ -514,7 +511,7 @@ pcie@0,0 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rstctrl 24>;
+ resets = <&sysc MT7621_RST_PCIE0>;
clocks = <&sysc MT7621_CLK_PCIE0>;
phys = <&pcie0_phy 1>;
phy-names = "pcie-phy0";
@@ -529,7 +526,7 @@ pcie@1,0 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rstctrl 25>;
+ resets = <&sysc MT7621_RST_PCIE1>;
clocks = <&sysc MT7621_CLK_PCIE1>;
phys = <&pcie0_phy 1>;
phy-names = "pcie-phy1";
@@ -544,7 +541,7 @@ pcie@2,0 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rstctrl 26>;
+ resets = <&sysc MT7621_RST_PCIE2>;
clocks = <&sysc MT7621_CLK_PCIE2>;
phys = <&pcie2_phy 0>;
phy-names = "pcie-phy2";
--
2.33.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v2 0/4] clk: ralink: make system controller a reset provider
2021-10-06 11:23 [PATCH v2 0/4] clk: ralink: make system controller a reset provider Sergio Paracuellos
` (3 preceding siblings ...)
2021-10-06 11:23 ` [PATCH v2 4/4] staging: mt7621-dts: align resets with binding documentation Sergio Paracuellos
@ 2021-10-17 6:51 ` Sergio Paracuellos
2021-10-30 14:23 ` Sergio Paracuellos
4 siblings, 1 reply; 9+ messages in thread
From: Sergio Paracuellos @ 2021-10-17 6:51 UTC (permalink / raw)
To: Stephen Boyd
Cc: open list:COMMON CLK FRAMEWORK, Greg KH,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Rob Herring, linux-staging, NeilBrown, linux-kernel,
John Crispin
Hi Stephen,
On Wed, Oct 6, 2021 at 1:23 PM Sergio Paracuellos
<sergio.paracuellos@gmail.com> wrote:
>
> Hi all,
>
> This patch series add minimal change to provide mt7621 resets properly
> defining them in the 'mediatek,mt7621-sysc' node which is the system
> controller of the SoC and is already providing clocks to the rest of
> the world.
>
> There is shared architecture code for all ralink platforms in 'reset.c'
> file located in 'arch/mips/ralink' but the correct thing to do to align
> hardware with software seems to define and add related reset code to the
> already mainlined clock driver.
>
> After this changes, we can get rid of the useless reset controller node
> in the device tree and use system controller node instead where the property
> '#reset-cells' has been added. Binding documentation for this nodeq has
> been updated with the new property accordly.
>
> This series also provide a bindings include header where all related
> reset bits for the MT7621 SoC are defined.
>
> Also, please take a look to this review [0] to understand better motivation
> for this series.
>
> Thanks in advance for your feedback.
>
> Changes in v2:
> - Address review comments of Dan Carpenter [1]:
> + Avoid 'inline' in function definition.
> + Return proper error codes (-EINVAL) instead of '-1'.
> + Make use of 'devm_kzalloc' instead of 'kzalloc'.
Can you please take a look into this series? I'd like them to be added
in the next merge window and if something needs to be changed I'd like
to have a bit of time to do it :)).
Regarding how to merge this I guess all of the patches should apply
cleanly in any tree but since there are already changes in mt7621-dts
maybe patches 1 and 4 which are related can go through the staging
tree (if Greg is ok with this) and the bindings doc change and driver
changes (patches 2 and 3) can go through your tree.
Thanks in advance for your time.
Best regards,
Sergio Paracuellos
>
> Best regards,
> Sergio Paracuellos
>
> [0]: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210926145931.14603-3-sergio.paracuellos@gmail.com/
> [1]: https://lkml.org/lkml/2021/10/6/204
>
> Sergio Paracuellos (4):
> dt-bindings: reset: add dt binding header for Mediatek MT7621 resets
> dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property
> clk: ralink: make system controller node a reset provider
> staging: mt7621-dts: align resets with binding documentation
>
> .../bindings/clock/mediatek,mt7621-sysc.yaml | 12 +++
> drivers/clk/ralink/clk-mt7621.c | 79 +++++++++++++++++++
> drivers/staging/mt7621-dts/mt7621.dtsi | 27 +++----
> include/dt-bindings/reset/mt7621-reset.h | 37 +++++++++
> 4 files changed, 140 insertions(+), 15 deletions(-)
> create mode 100644 include/dt-bindings/reset/mt7621-reset.h
>
> --
> 2.33.0
>
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v2 0/4] clk: ralink: make system controller a reset provider
2021-10-17 6:51 ` [PATCH v2 0/4] clk: ralink: make system controller a reset provider Sergio Paracuellos
@ 2021-10-30 14:23 ` Sergio Paracuellos
0 siblings, 0 replies; 9+ messages in thread
From: Sergio Paracuellos @ 2021-10-30 14:23 UTC (permalink / raw)
To: Stephen Boyd
Cc: open list:COMMON CLK FRAMEWORK, Greg KH,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Rob Herring, linux-staging, NeilBrown, linux-kernel,
John Crispin
Hi Stephen,
On Sun, Oct 17, 2021 at 8:51 AM Sergio Paracuellos
<sergio.paracuellos@gmail.com> wrote:
>
> Hi Stephen,
>
> On Wed, Oct 6, 2021 at 1:23 PM Sergio Paracuellos
> <sergio.paracuellos@gmail.com> wrote:
> >
> > Hi all,
> >
> > This patch series add minimal change to provide mt7621 resets properly
> > defining them in the 'mediatek,mt7621-sysc' node which is the system
> > controller of the SoC and is already providing clocks to the rest of
> > the world.
> >
> > There is shared architecture code for all ralink platforms in 'reset.c'
> > file located in 'arch/mips/ralink' but the correct thing to do to align
> > hardware with software seems to define and add related reset code to the
> > already mainlined clock driver.
> >
> > After this changes, we can get rid of the useless reset controller node
> > in the device tree and use system controller node instead where the property
> > '#reset-cells' has been added. Binding documentation for this nodeq has
> > been updated with the new property accordly.
> >
> > This series also provide a bindings include header where all related
> > reset bits for the MT7621 SoC are defined.
> >
> > Also, please take a look to this review [0] to understand better motivation
> > for this series.
> >
> > Thanks in advance for your feedback.
> >
> > Changes in v2:
> > - Address review comments of Dan Carpenter [1]:
> > + Avoid 'inline' in function definition.
> > + Return proper error codes (-EINVAL) instead of '-1'.
> > + Make use of 'devm_kzalloc' instead of 'kzalloc'.
>
> Can you please take a look into this series? I'd like them to be added
> in the next merge window and if something needs to be changed I'd like
> to have a bit of time to do it :)).
>
> Regarding how to merge this I guess all of the patches should apply
> cleanly in any tree but since there are already changes in mt7621-dts
> maybe patches 1 and 4 which are related can go through the staging
> tree (if Greg is ok with this) and the bindings doc change and driver
> changes (patches 2 and 3) can go through your tree.
I have just sent v3 since PATCH 4 did not apply cleanly anymore in
both clock tree and staging tree.
Best regards,
Sergio Paracuellos
>
> Thanks in advance for your time.
>
> Best regards,
> Sergio Paracuellos
>
> >
> > Best regards,
> > Sergio Paracuellos
> >
> > [0]: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210926145931.14603-3-sergio.paracuellos@gmail.com/
> > [1]: https://lkml.org/lkml/2021/10/6/204
> >
> > Sergio Paracuellos (4):
> > dt-bindings: reset: add dt binding header for Mediatek MT7621 resets
> > dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property
> > clk: ralink: make system controller node a reset provider
> > staging: mt7621-dts: align resets with binding documentation
> >
> > .../bindings/clock/mediatek,mt7621-sysc.yaml | 12 +++
> > drivers/clk/ralink/clk-mt7621.c | 79 +++++++++++++++++++
> > drivers/staging/mt7621-dts/mt7621.dtsi | 27 +++----
> > include/dt-bindings/reset/mt7621-reset.h | 37 +++++++++
> > 4 files changed, 140 insertions(+), 15 deletions(-)
> > create mode 100644 include/dt-bindings/reset/mt7621-reset.h
> >
> > --
> > 2.33.0
> >
^ permalink raw reply [flat|nested] 9+ messages in thread