[PATCH 4.19 00/35] 4.19.215-rc1 review

[PATCH 4.19 00/35] 4.19.215-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.215 release.
There are 35 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 03 Nov 2021 08:24:20 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.215-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.215-rc1

Xin Long <lucien.xin@gmail.com>
    sctp: add vtag check in sctp_sf_ootb

Xin Long <lucien.xin@gmail.com>
    sctp: add vtag check in sctp_sf_do_8_5_1_E_sa

Xin Long <lucien.xin@gmail.com>
    sctp: add vtag check in sctp_sf_violation

Xin Long <lucien.xin@gmail.com>
    sctp: fix the processing for COOKIE_ECHO chunk

Xin Long <lucien.xin@gmail.com>
    sctp: use init_tag from inithdr for ABORT chunk

Trevor Woerner <twoerner@gmail.com>
    net: nxp: lpc_eth.c: avoid hang when bringing interface down

Yuiko Oshino <yuiko.oshino@microchip.com>
    net: ethernet: microchip: lan743x: Fix dma allocation failure by using dma_set_mask_and_coherent

Yuiko Oshino <yuiko.oshino@microchip.com>
    net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume fails

Guenter Roeck <linux@roeck-us.net>
    nios2: Make NIOS2_DTB_SOURCE_BOOL depend on !COMPILE_TEST

Michael Chan <michael.chan@broadcom.com>
    net: Prevent infinite while loop in skb_tx_hash()

Pavel Skripkin <paskripkin@gmail.com>
    net: batman-adv: fix error handling

Yang Yingliang <yangyingliang@huawei.com>
    regmap: Fix possible double-free in regcache_rbtree_exit()

Clément Bœsch <u@pkh.me>
    arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node

Patrisious Haddad <phaddad@nvidia.com>
    RDMA/mlx5: Set user priority for DCT

Johan Hovold <johan@kernel.org>
    net: lan78xx: fix division by zero in send path

Haibo Chen <haibo.chen@nxp.com>
    mmc: sdhci-esdhc-imx: clear the buffer_read_ready to reset standard tuning circuit

Shawn Guo <shawn.guo@linaro.org>
    mmc: sdhci: Map more voltage level to SDHCI_POWER_330

Jaehoon Chung <jh80.chung@samsung.com>
    mmc: dw_mmc: exynos: fix the finding clock sample value

Wenbin Mei <wenbin.mei@mediatek.com>
    mmc: cqhci: clear HALT state after CQE enable

Johan Hovold <johan@kernel.org>
    mmc: vub300: fix control-message timeouts

Eric Dumazet <edumazet@google.com>
    ipv6: make exception cache less predictible

Eric Dumazet <edumazet@google.com>
    ipv6: use siphash in rt6_exception_hash()

Eric Dumazet <edumazet@google.com>
    ipv4: use siphash instead of Jenkins in fnhe_hashfun()

Pavel Skripkin <paskripkin@gmail.com>
    Revert "net: mdiobus: Fix memory leak in __mdiobus_register"

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    nfc: port100: fix using -ERRNO as command type mask

Zheyu Ma <zheyuma97@gmail.com>
    ata: sata_mv: Fix the error handling of mv_chip_id()

Wang Hai <wanghai38@huawei.com>
    usbnet: fix error return code in usbnet_probe()

Oliver Neukum <oneukum@suse.com>
    usbnet: sanity check for maxpacket

Nathan Chancellor <natechancellor@gmail.com>
    ARM: 8819/1: Remove '-p' from LDFLAGS

Robin Murphy <robin.murphy@arm.com>
    arm64: Avoid premature usercopy failure

Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
    powerpc/bpf: Fix BPF_MOD when imm == 1

Arnd Bergmann <arnd@arndb.de>
    ARM: 9141/1: only warn about XIP address when not compile testing

Arnd Bergmann <arnd@arndb.de>
    ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype

Arnd Bergmann <arnd@arndb.de>
    ARM: 9134/1: remove duplicate memcpy() definition

Nick Desaulniers <ndesaulniers@google.com>
    ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned


-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arm/Makefile                                  |  2 +-
 arch/arm/boot/bootp/Makefile                       |  2 +-
 arch/arm/boot/compressed/Makefile                  |  2 -
 arch/arm/boot/compressed/decompress.c              |  3 ++
 arch/arm/kernel/vmlinux-xip.lds.S                  |  2 +-
 arch/arm/mm/proc-macros.S                          |  1 +
 arch/arm/probes/kprobes/core.c                     |  2 +-
 .../boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts   |  2 +-
 arch/arm64/lib/copy_from_user.S                    | 13 +++--
 arch/arm64/lib/copy_in_user.S                      | 20 +++++---
 arch/arm64/lib/copy_to_user.S                      | 14 ++++--
 arch/nios2/platform/Kconfig.platform               |  1 +
 arch/powerpc/net/bpf_jit_comp64.c                  | 10 +++-
 drivers/ata/sata_mv.c                              |  4 +-
 drivers/base/regmap/regcache-rbtree.c              |  7 ++-
 drivers/infiniband/hw/mlx5/qp.c                    |  2 +
 drivers/mmc/host/cqhci.c                           |  3 ++
 drivers/mmc/host/dw_mmc-exynos.c                   | 14 ++++++
 drivers/mmc/host/sdhci-esdhc-imx.c                 | 16 +++++++
 drivers/mmc/host/sdhci.c                           |  6 +++
 drivers/mmc/host/vub300.c                          | 18 +++----
 drivers/net/ethernet/microchip/lan743x_main.c      | 22 +++++++++
 drivers/net/ethernet/nxp/lpc_eth.c                 |  5 +-
 drivers/net/phy/mdio_bus.c                         |  1 -
 drivers/net/usb/lan78xx.c                          |  6 +++
 drivers/net/usb/usbnet.c                           |  5 ++
 drivers/nfc/port100.c                              |  4 +-
 net/batman-adv/bridge_loop_avoidance.c             |  8 +++-
 net/batman-adv/main.c                              | 56 +++++++++++++++-------
 net/batman-adv/network-coding.c                    |  4 +-
 net/batman-adv/translation-table.c                 |  4 +-
 net/core/dev.c                                     |  6 +++
 net/ipv4/route.c                                   | 12 ++---
 net/ipv6/route.c                                   | 25 +++++++---
 net/sctp/sm_statefuns.c                            | 30 ++++++++----
 36 files changed, 249 insertions(+), 87 deletions(-)

[PATCH 4.19 01/35] ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned

[Greg Kroah-Hartman]

From: Nick Desaulniers <ndesaulniers@google.com>

commit e6a0c958bdf9b2e1b57501fc9433a461f0a6aadd upstream.

A kernel built with CONFIG_THUMB2_KERNEL=y and using clang as the
assembler could generate non-naturally-aligned v7wbi_tlb_fns which
results in a boot failure. The original commit adding the macro missed
the .align directive on this data.

Link: https://github.com/ClangBuiltLinux/linux/issues/1447
Link: https://lore.kernel.org/all/0699da7b-354f-aecc-a62f-e25693209af4@linaro.org/
Debugged-by: Ard Biesheuvel <ardb@kernel.org>
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Debugged-by: Richard Henderson <richard.henderson@linaro.org>

Fixes: 66a625a88174 ("ARM: mm: proc-macros: Add generic proc/cache/tlb struct definition macros")
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mm/proc-macros.S |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -342,6 +342,7 @@ ENTRY(\name\()_cache_fns)
 
 .macro define_tlb_functions name:req, flags_up:req, flags_smp
 	.type	\name\()_tlb_fns, #object
+	.align 2
 ENTRY(\name\()_tlb_fns)
 	.long	\name\()_flush_user_tlb_range
 	.long	\name\()_flush_kern_tlb_range

[PATCH 4.19 02/35] ARM: 9134/1: remove duplicate memcpy() definition

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit eaf6cc7165c9c5aa3c2f9faa03a98598123d0afb upstream.

Both the decompressor code and the kasan logic try to override
the memcpy() and memmove()  definitions, which leading to a clash
in a KASAN-enabled kernel with XZ decompression:

arch/arm/boot/compressed/decompress.c:50:9: error: 'memmove' macro redefined [-Werror,-Wmacro-redefined]
 #define memmove memmove
        ^
arch/arm/include/asm/string.h:59:9: note: previous definition is here
 #define memmove(dst, src, len) __memmove(dst, src, len)
        ^
arch/arm/boot/compressed/decompress.c:51:9: error: 'memcpy' macro redefined [-Werror,-Wmacro-redefined]
 #define memcpy memcpy
        ^
arch/arm/include/asm/string.h:58:9: note: previous definition is here
 #define memcpy(dst, src, len) __memcpy(dst, src, len)
        ^

Here we want the set of functions from the decompressor, so undefine
the other macros before the override.

Link: https://lore.kernel.org/linux-arm-kernel/CACRpkdZYJogU_SN3H9oeVq=zJkRgRT1gDz3xp59gdqWXxw-B=w@mail.gmail.com/
Link: https://lore.kernel.org/lkml/202105091112.F5rmd4By-lkp@intel.com/

Fixes: d6d51a96c7d6 ("ARM: 9014/2: Replace string mem* functions for KASan")
Fixes: a7f464f3db93 ("ARM: 7001/2: Wire up support for the XZ decompressor")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/compressed/decompress.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -46,7 +46,10 @@ extern int memcmp(const void *cs, const
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif

[PATCH 4.19 03/35] ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 1f323127cab086e4fd618981b1e5edc396eaf0f4 upstream.

With extra warnings enabled, gcc complains about this function
definition:

arch/arm/probes/kprobes/core.c: In function 'arch_init_kprobes':
arch/arm/probes/kprobes/core.c:465:12: warning: old-style function definition [-Wold-style-definition]
  465 | int __init arch_init_kprobes()

Link: https://lore.kernel.org/all/20201027093057.c685a14b386acacb3c449e3d@kernel.org/

Fixes: 24ba613c9d6c ("ARM kprobes: core code")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/probes/kprobes/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/probes/kprobes/core.c
+++ b/arch/arm/probes/kprobes/core.c
@@ -542,7 +542,7 @@ static struct undef_hook kprobes_arm_bre
 
 #endif /* !CONFIG_THUMB2_KERNEL */
 
-int __init arch_init_kprobes()
+int __init arch_init_kprobes(void)
 {
 	arm_probes_decode_init();
 #ifdef CONFIG_THUMB2_KERNEL

[PATCH 4.19 04/35] ARM: 9141/1: only warn about XIP address when not compile testing

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 48ccc8edf5b90622cdc4f8878e0042ab5883e2ca upstream.

In randconfig builds, we sometimes come across this warning:

arm-linux-gnueabi-ld: XIP start address may cause MPU programming issues

While this is helpful for actual systems to figure out why it
fails, the warning does not provide any benefit for build testing,
so guard it in a check for CONFIG_COMPILE_TEST, which is usually
set on randconfig builds.

Fixes: 216218308cfb ("ARM: 8713/1: NOMMU: Support MPU in XIP configuration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/kernel/vmlinux-xip.lds.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/kernel/vmlinux-xip.lds.S
+++ b/arch/arm/kernel/vmlinux-xip.lds.S
@@ -181,7 +181,7 @@ ASSERT(__hyp_idmap_text_end - (__hyp_idm
 ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
 #endif
 
-#ifdef CONFIG_ARM_MPU
+#if defined(CONFIG_ARM_MPU) && !defined(CONFIG_COMPILE_TEST)
 /*
  * Due to PMSAv7 restriction on base address and size we have to
  * enforce minimal alignment restrictions. It was seen that weaker

[PATCH 4.19 05/35] powerpc/bpf: Fix BPF_MOD when imm == 1

[Greg Kroah-Hartman]

From: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>

commit 8bbc9d822421d9ac8ff9ed26a3713c9afc69d6c8 upstream.

Only ignore the operation if dividing by 1.

Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c674ca18c3046885602caebb326213731c675d06.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
[cascardo: use PPC_LI instead of EMIT(PPC_RAW_LI)]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/net/bpf_jit_comp64.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -385,8 +385,14 @@ static int bpf_jit_build_body(struct bpf
 		case BPF_ALU64 | BPF_DIV | BPF_K: /* dst /= imm */
 			if (imm == 0)
 				return -EINVAL;
-			else if (imm == 1)
-				goto bpf_alu32_trunc;
+			if (imm == 1) {
+				if (BPF_OP(code) == BPF_DIV) {
+					goto bpf_alu32_trunc;
+				} else {
+					PPC_LI(dst_reg, 0);
+					break;
+				}
+			}
 
 			PPC_LI32(b2p[TMP_REG_1], imm);
 			switch (BPF_CLASS(code)) {

[PATCH 4.19 06/35] arm64: Avoid premature usercopy failure

[Greg Kroah-Hartman]

From: Robin Murphy <robin.murphy@arm.com>

commit 295cf156231ca3f9e3a66bde7fab5e09c41835e0 upstream.

Al reminds us that the usercopy API must only return complete failure
if absolutely nothing could be copied. Currently, if userspace does
something silly like giving us an unaligned pointer to Device memory,
or a size which overruns MTE tag bounds, we may fail to honour that
requirement when faulting on a multi-byte access even though a smaller
access could have succeeded.

Add a mitigation to the fixup routines to fall back to a single-byte
copy if we faulted on a larger access before anything has been written
to the destination, to guarantee making *some* forward progress. We
needn't be too concerned about the overall performance since this should
only occur when callers are doing something a bit dodgy in the first
place. Particularly broken userspace might still be able to trick
generic_perform_write() into an infinite loop by targeting write() at
an mmap() of some read-only device register where the fault-in load
succeeds but any store synchronously aborts such that copy_to_user() is
genuinely unable to make progress, but, well, don't do that...

CC: stable@vger.kernel.org
Reported-by: Chen Huang <chenhuang5@huawei.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/dc03d5c675731a1f24a62417dba5429ad744234e.1626098433.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chen Huang <chenhuang5@huawei.com>
---
 arch/arm64/lib/copy_from_user.S |   13 ++++++++++---
 arch/arm64/lib/copy_in_user.S   |   20 ++++++++++++++------
 arch/arm64/lib/copy_to_user.S   |   14 +++++++++++---
 3 files changed, 35 insertions(+), 12 deletions(-)

--- a/arch/arm64/lib/copy_from_user.S
+++ b/arch/arm64/lib/copy_from_user.S
@@ -39,7 +39,7 @@
 	.endm
 
 	.macro ldrh1 ptr, regB, val
-	uao_user_alternative 9998f, ldrh, ldtrh, \ptr, \regB, \val
+	uao_user_alternative 9997f, ldrh, ldtrh, \ptr, \regB, \val
 	.endm
 
 	.macro strh1 ptr, regB, val
@@ -47,7 +47,7 @@
 	.endm
 
 	.macro ldr1 ptr, regB, val
-	uao_user_alternative 9998f, ldr, ldtr, \ptr, \regB, \val
+	uao_user_alternative 9997f, ldr, ldtr, \ptr, \regB, \val
 	.endm
 
 	.macro str1 ptr, regB, val
@@ -55,7 +55,7 @@
 	.endm
 
 	.macro ldp1 ptr, regB, regC, val
-	uao_ldp 9998f, \ptr, \regB, \regC, \val
+	uao_ldp 9997f, \ptr, \regB, \regC, \val
 	.endm
 
 	.macro stp1 ptr, regB, regC, val
@@ -63,9 +63,11 @@
 	.endm
 
 end	.req	x5
+srcin	.req	x15
 ENTRY(__arch_copy_from_user)
 	uaccess_enable_not_uao x3, x4, x5
 	add	end, x0, x2
+	mov	srcin, x1
 #include "copy_template.S"
 	uaccess_disable_not_uao x3, x4
 	mov	x0, #0				// Nothing to copy
@@ -74,6 +76,11 @@ ENDPROC(__arch_copy_from_user)
 
 	.section .fixup,"ax"
 	.align	2
+9997:	cmp	dst, dstin
+	b.ne	9998f
+	// Before being absolutely sure we couldn't copy anything, try harder
+USER(9998f, ldtrb tmp1w, [srcin])
+	strb	tmp1w, [dst], #1
 9998:	sub	x0, end, dst			// bytes not copied
 	uaccess_disable_not_uao x3, x4
 	ret
--- a/arch/arm64/lib/copy_in_user.S
+++ b/arch/arm64/lib/copy_in_user.S
@@ -40,34 +40,36 @@
 	.endm
 
 	.macro ldrh1 ptr, regB, val
-	uao_user_alternative 9998f, ldrh, ldtrh, \ptr, \regB, \val
+	uao_user_alternative 9997f, ldrh, ldtrh, \ptr, \regB, \val
 	.endm
 
 	.macro strh1 ptr, regB, val
-	uao_user_alternative 9998f, strh, sttrh, \ptr, \regB, \val
+	uao_user_alternative 9997f, strh, sttrh, \ptr, \regB, \val
 	.endm
 
 	.macro ldr1 ptr, regB, val
-	uao_user_alternative 9998f, ldr, ldtr, \ptr, \regB, \val
+	uao_user_alternative 9997f, ldr, ldtr, \ptr, \regB, \val
 	.endm
 
 	.macro str1 ptr, regB, val
-	uao_user_alternative 9998f, str, sttr, \ptr, \regB, \val
+	uao_user_alternative 9997f, str, sttr, \ptr, \regB, \val
 	.endm
 
 	.macro ldp1 ptr, regB, regC, val
-	uao_ldp 9998f, \ptr, \regB, \regC, \val
+	uao_ldp 9997f, \ptr, \regB, \regC, \val
 	.endm
 
 	.macro stp1 ptr, regB, regC, val
-	uao_stp 9998f, \ptr, \regB, \regC, \val
+	uao_stp 9997f, \ptr, \regB, \regC, \val
 	.endm
 
 end	.req	x5
+srcin	.req	x15
 
 ENTRY(__arch_copy_in_user)
 	uaccess_enable_not_uao x3, x4, x5
 	add	end, x0, x2
+	mov	srcin, x1
 #include "copy_template.S"
 	uaccess_disable_not_uao x3, x4
 	mov	x0, #0
@@ -76,6 +78,12 @@ ENDPROC(__arch_copy_in_user)
 
 	.section .fixup,"ax"
 	.align	2
+9997:	cmp	dst, dstin
+	b.ne	9998f
+	// Before being absolutely sure we couldn't copy anything, try harder
+USER(9998f, ldtrb tmp1w, [srcin])
+USER(9998f, sttrb tmp1w, [dst])
+	add	dst, dst, #1
 9998:	sub	x0, end, dst			// bytes not copied
 	uaccess_disable_not_uao x3, x4
 	ret
--- a/arch/arm64/lib/copy_to_user.S
+++ b/arch/arm64/lib/copy_to_user.S
@@ -42,7 +42,7 @@
 	.endm
 
 	.macro strh1 ptr, regB, val
-	uao_user_alternative 9998f, strh, sttrh, \ptr, \regB, \val
+	uao_user_alternative 9997f, strh, sttrh, \ptr, \regB, \val
 	.endm
 
 	.macro ldr1 ptr, regB, val
@@ -50,7 +50,7 @@
 	.endm
 
 	.macro str1 ptr, regB, val
-	uao_user_alternative 9998f, str, sttr, \ptr, \regB, \val
+	uao_user_alternative 9997f, str, sttr, \ptr, \regB, \val
 	.endm
 
 	.macro ldp1 ptr, regB, regC, val
@@ -58,13 +58,15 @@
 	.endm
 
 	.macro stp1 ptr, regB, regC, val
-	uao_stp 9998f, \ptr, \regB, \regC, \val
+	uao_stp 9997f, \ptr, \regB, \regC, \val
 	.endm
 
 end	.req	x5
+srcin	.req	x15
 ENTRY(__arch_copy_to_user)
 	uaccess_enable_not_uao x3, x4, x5
 	add	end, x0, x2
+	mov	srcin, x1
 #include "copy_template.S"
 	uaccess_disable_not_uao x3, x4
 	mov	x0, #0
@@ -73,6 +75,12 @@ ENDPROC(__arch_copy_to_user)
 
 	.section .fixup,"ax"
 	.align	2
+9997:	cmp	dst, dstin
+	b.ne	9998f
+	// Before being absolutely sure we couldn't copy anything, try harder
+	ldrb	tmp1w, [srcin]
+USER(9998f, sttrb tmp1w, [dst])
+	add	dst, dst, #1
 9998:	sub	x0, end, dst			// bytes not copied
 	uaccess_disable_not_uao x3, x4
 	ret

[PATCH 4.19 07/35] ARM: 8819/1: Remove -p from LDFLAGS

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

commit 091bb549f7722723b284f63ac665e2aedcf9dec9 upstream.

This option is not supported by lld:

    ld.lld: error: unknown argument: -p

This has been a no-op in binutils since 2004 (see commit dea514f51da1 in
that tree). Given that the lowest officially supported of binutils for
the kernel is 2.20, which was released in 2009, nobody needs this flag
around so just remove it. Commit 1a381d4a0a9a ("arm64: remove no-op -p
linker flag") did the same for arm64.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/Makefile                 |    2 +-
 arch/arm/boot/bootp/Makefile      |    2 +-
 arch/arm/boot/compressed/Makefile |    2 --
 3 files changed, 2 insertions(+), 4 deletions(-)

--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -10,7 +10,7 @@
 #
 # Copyright (C) 1995-2001 by Russell King
 
-LDFLAGS_vmlinux	:=-p --no-undefined -X --pic-veneer
+LDFLAGS_vmlinux	:= --no-undefined -X --pic-veneer
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
 KBUILD_LDFLAGS_MODULE	+= --be8
--- a/arch/arm/boot/bootp/Makefile
+++ b/arch/arm/boot/bootp/Makefile
@@ -8,7 +8,7 @@
 
 GCOV_PROFILE	:= n
 
-LDFLAGS_bootp	:=-p --no-undefined -X \
+LDFLAGS_bootp	:= --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
 		 --defsym params_phys=$(PARAMS_PHYS) -T
 AFLAGS_initrd.o :=-DINITRD=\"$(INITRD)\"
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -133,8 +133,6 @@ endif
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif
-# ?
-LDFLAGS_vmlinux += -p
 # Report unresolved symbol references
 LDFLAGS_vmlinux += --no-undefined
 # Delete all temporary local symbols

[PATCH 4.19 08/35] usbnet: sanity check for maxpacket

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 397430b50a363d8b7bdda00522123f82df6adc5e upstream.

maxpacket of 0 makes no sense and oopses as we need to divide
by it. Give up.

V2: fixed typo in log and stylistic issues

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/usbnet.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1784,6 +1784,10 @@ usbnet_probe (struct usb_interface *udev
 	if (!dev->rx_urb_size)
 		dev->rx_urb_size = dev->hard_mtu;
 	dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
+	if (dev->maxpacket == 0) {
+		/* that is a broken device */
+		goto out4;
+	}
 
 	/* let userspace know we have a random address */
 	if (ether_addr_equal(net->dev_addr, node_id))

[PATCH 4.19 09/35] usbnet: fix error return code in usbnet_probe()

[Greg Kroah-Hartman]

From: Wang Hai <wanghai38@huawei.com>

commit 6f7c88691191e6c52ef2543d6f1da8d360b27a24 upstream.

Return error code if usb_maxpacket() returns 0 in usbnet_probe()

Fixes: 397430b50a36 ("usbnet: sanity check for maxpacket")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211026124015.3025136-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/usbnet.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1786,6 +1786,7 @@ usbnet_probe (struct usb_interface *udev
 	dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
 	if (dev->maxpacket == 0) {
 		/* that is a broken device */
+		status = -ENODEV;
 		goto out4;
 	}
 

[PATCH 4.19 10/35] ata: sata_mv: Fix the error handling of mv_chip_id()

[Greg Kroah-Hartman]

From: Zheyu Ma <zheyuma97@gmail.com>

commit a0023bb9dd9bc439d44604eeec62426a990054cd upstream.

mv_init_host() propagates the value returned by mv_chip_id() which in turn
gets propagated by mv_pci_init_one() and hits local_pci_probe().

During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.

Since this is a bug rather than a recoverable runtime error we should
use dev_alert() instead of dev_err().

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ata/sata_mv.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -3905,8 +3905,8 @@ static int mv_chip_id(struct ata_host *h
 		break;
 
 	default:
-		dev_err(host->dev, "BUG: invalid board index %u\n", board_idx);
-		return 1;
+		dev_alert(host->dev, "BUG: invalid board index %u\n", board_idx);
+		return -EINVAL;
 	}
 
 	hpriv->hp_flags = hp_flags;

[PATCH 4.19 11/35] nfc: port100: fix using -ERRNO as command type mask

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

commit 2195f2062e4cc93870da8e71c318ef98a1c51cef upstream.

During probing, the driver tries to get a list (mask) of supported
command types in port100_get_command_type_mask() function.  The value
is u64 and 0 is treated as invalid mask (no commands supported).  The
function however returns also -ERRNO as u64 which will be interpret as
valid command mask.

Return 0 on every error case of port100_get_command_type_mask(), so the
probing will stop.

Cc: <stable@vger.kernel.org>
Fixes: 0347a6ab300a ("NFC: port100: Commands mechanism implementation")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nfc/port100.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/nfc/port100.c
+++ b/drivers/nfc/port100.c
@@ -1012,11 +1012,11 @@ static u64 port100_get_command_type_mask
 
 	skb = port100_alloc_skb(dev, 0);
 	if (!skb)
-		return -ENOMEM;
+		return 0;
 
 	resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_COMMAND_TYPE, skb);
 	if (IS_ERR(resp))
-		return PTR_ERR(resp);
+		return 0;
 
 	if (resp->len < 8)
 		mask = 0;

[PATCH 4.19 12/35] Revert "net: mdiobus: Fix memory leak in __mdiobus_register"

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit 10eff1f5788b6ffac212c254e2f3666219576889 upstream.

This reverts commit ab609f25d19858513919369ff3d9a63c02cd9e2e.

This patch is correct in the sense that we _should_ call device_put() in
case of device_register() failure, but the problem in this code is more
vast.

We need to set bus->state to UNMDIOBUS_REGISTERED before calling
device_register() to correctly release the device in mdiobus_free().
This patch prevents us from doing it, since in case of device_register()
failure put_device() will be called 2 times and it will cause UAF or
something else.

Also, Reported-by: tag in revered commit was wrong, since syzbot
reported different leak in same function.

Link: https://lore.kernel.org/netdev/20210928092657.GI2048@kadam/
Acked-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/f12fb1faa4eccf0f355788225335eb4309ff2599.1633024062.git.paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/mdio_bus.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -388,7 +388,6 @@ int __mdiobus_register(struct mii_bus *b
 	err = device_register(&bus->dev);
 	if (err) {
 		pr_err("mii_bus %s failed to register\n", bus->id);
-		put_device(&bus->dev);
 		return -EINVAL;
 	}
 

[PATCH 4.19 13/35] ipv4: use siphash instead of Jenkins in fnhe_hashfun()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 6457378fe796815c973f631a1904e147d6ee33b1 upstream.

A group of security researchers brought to our attention
the weakness of hash function used in fnhe_hashfun().

Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.

Also remove the inline keyword, this really is distracting.

Fixes: d546c621542d ("ipv4: harden fnhe_hashfun()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: adjusted context for 4.19 stable]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/route.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -625,14 +625,14 @@ static void fnhe_remove_oldest(struct fn
 	kfree_rcu(oldest, rcu);
 }
 
-static inline u32 fnhe_hashfun(__be32 daddr)
+static u32 fnhe_hashfun(__be32 daddr)
 {
-	static u32 fnhe_hashrnd __read_mostly;
-	u32 hval;
+	static siphash_key_t fnhe_hash_key __read_mostly;
+	u64 hval;
 
-	net_get_random_once(&fnhe_hashrnd, sizeof(fnhe_hashrnd));
-	hval = jhash_1word((__force u32) daddr, fnhe_hashrnd);
-	return hash_32(hval, FNHE_HASH_SHIFT);
+	net_get_random_once(&fnhe_hash_key, sizeof(fnhe_hash_key));
+	hval = siphash_1u32((__force u32)daddr, &fnhe_hash_key);
+	return hash_64(hval, FNHE_HASH_SHIFT);
 }
 
 static void fill_route_from_fnhe(struct rtable *rt, struct fib_nh_exception *fnhe)

[PATCH 4.19 14/35] ipv6: use siphash in rt6_exception_hash()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 4785305c05b25a242e5314cc821f54ade4c18810 upstream.

A group of security researchers brought to our attention
the weakness of hash function used in rt6_exception_hash()

Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.

Following patch deals with IPv4.

Fixes: 35732d01fe31 ("ipv6: introduce a hash table to store dst cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: adjusted context for 4.19 stable]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/route.c |   20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -45,6 +45,7 @@
 #include <linux/nsproxy.h>
 #include <linux/slab.h>
 #include <linux/jhash.h>
+#include <linux/siphash.h>
 #include <net/net_namespace.h>
 #include <net/snmp.h>
 #include <net/ipv6.h>
@@ -1337,17 +1338,24 @@ static void rt6_exception_remove_oldest(
 static u32 rt6_exception_hash(const struct in6_addr *dst,
 			      const struct in6_addr *src)
 {
-	static u32 seed __read_mostly;
-	u32 val;
+	static siphash_key_t rt6_exception_key __read_mostly;
+	struct {
+		struct in6_addr dst;
+		struct in6_addr src;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.dst = *dst,
+	};
+	u64 val;
 
-	net_get_random_once(&seed, sizeof(seed));
-	val = jhash(dst, sizeof(*dst), seed);
+	net_get_random_once(&rt6_exception_key, sizeof(rt6_exception_key));
 
 #ifdef CONFIG_IPV6_SUBTREES
 	if (src)
-		val = jhash(src, sizeof(*src), val);
+		combined.src = *src;
 #endif
-	return hash_32(val, FIB6_EXCEPTION_BUCKET_SIZE_SHIFT);
+	val = siphash(&combined, sizeof(combined), &rt6_exception_key);
+
+	return hash_64(val, FIB6_EXCEPTION_BUCKET_SIZE_SHIFT);
 }
 
 /* Helper function to find the cached rt in the hash table

[PATCH 4.19 15/35] ipv6: make exception cache less predictible

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit a00df2caffed3883c341d5685f830434312e4a43 upstream.

Even after commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()"),
an attacker can still use brute force to learn some secrets from a victim
linux host.

One way to defeat these attacks is to make the max depth of the hash
table bucket a random value.

Before this patch, each bucket of the hash table used to store exceptions
could contain 6 items under attack.

After the patch, each bucket would contains a random number of items,
between 6 and 10. The attacker can no longer infer secrets.

This is slightly increasing memory size used by the hash table,
we do not expect this to be a problem.

Following patch is dealing with the same issue in IPv4.

Fixes: 35732d01fe31 ("ipv6: introduce a hash table to store dst cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: adjusted context for 4.19 stable]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/route.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1454,6 +1454,7 @@ static int rt6_insert_exception(struct r
 	struct rt6_exception_bucket *bucket;
 	struct in6_addr *src_key = NULL;
 	struct rt6_exception *rt6_ex;
+	int max_depth;
 	int err = 0;
 
 	spin_lock_bh(&rt6_exception_lock);
@@ -1515,7 +1516,9 @@ static int rt6_insert_exception(struct r
 	bucket->depth++;
 	net->ipv6.rt6_stats->fib_rt_cache++;
 
-	if (bucket->depth > FIB6_MAX_DEPTH)
+	/* Randomize max depth to avoid some side channels attacks. */
+	max_depth = FIB6_MAX_DEPTH + prandom_u32_max(FIB6_MAX_DEPTH);
+	while (bucket->depth > max_depth)
 		rt6_exception_remove_oldest(bucket);
 
 out:

[PATCH 4.19 16/35] mmc: vub300: fix control-message timeouts

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 8c8171929116cc23f74743d99251eedadf62341a upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@vger.kernel.org      # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211025115608.5287-1-johan@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/vub300.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -579,7 +579,7 @@ static void check_vub300_port_status(str
 				GET_SYSTEM_PORT_STATUS,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				0x0000, 0x0000, &vub300->system_port_status,
-				sizeof(vub300->system_port_status), HZ);
+				sizeof(vub300->system_port_status), 1000);
 	if (sizeof(vub300->system_port_status) == retval)
 		new_system_port_status(vub300);
 }
@@ -1244,7 +1244,7 @@ static void __download_offload_pseudocod
 						SET_INTERRUPT_PSEUDOCODE,
 						USB_DIR_OUT | USB_TYPE_VENDOR |
 						USB_RECIP_DEVICE, 0x0000, 0x0000,
-						xfer_buffer, xfer_length, HZ);
+						xfer_buffer, xfer_length, 1000);
 			kfree(xfer_buffer);
 			if (retval < 0)
 				goto copy_error_message;
@@ -1287,7 +1287,7 @@ static void __download_offload_pseudocod
 						SET_TRANSFER_PSEUDOCODE,
 						USB_DIR_OUT | USB_TYPE_VENDOR |
 						USB_RECIP_DEVICE, 0x0000, 0x0000,
-						xfer_buffer, xfer_length, HZ);
+						xfer_buffer, xfer_length, 1000);
 			kfree(xfer_buffer);
 			if (retval < 0)
 				goto copy_error_message;
@@ -1994,7 +1994,7 @@ static void __set_clock_speed(struct vub
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_CLOCK_SPEED,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				0x00, 0x00, buf, buf_array_size, HZ);
+				0x00, 0x00, buf, buf_array_size, 1000);
 	if (retval != 8) {
 		dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
 			" %dkHz failed with retval=%d\n", kHzClock, retval);
@@ -2016,14 +2016,14 @@ static void vub300_mmc_set_ios(struct mm
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_SD_POWER,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				0x0000, 0x0000, NULL, 0, HZ);
+				0x0000, 0x0000, NULL, 0, 1000);
 		/* must wait for the VUB300 u-proc to boot up */
 		msleep(600);
 	} else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) {
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_SD_POWER,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				0x0001, 0x0000, NULL, 0, HZ);
+				0x0001, 0x0000, NULL, 0, 1000);
 		msleep(600);
 		vub300->card_powered = 1;
 	} else if (ios->power_mode == MMC_POWER_ON) {
@@ -2285,14 +2285,14 @@ static int vub300_probe(struct usb_inter
 				GET_HC_INF0,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				0x0000, 0x0000, &vub300->hc_info,
-				sizeof(vub300->hc_info), HZ);
+				sizeof(vub300->hc_info), 1000);
 	if (retval < 0)
 		goto error5;
 	retval =
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_ROM_WAIT_STATES,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				firmware_rom_wait_states, 0x0000, NULL, 0, HZ);
+				firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
 	if (retval < 0)
 		goto error5;
 	dev_info(&vub300->udev->dev,
@@ -2307,7 +2307,7 @@ static int vub300_probe(struct usb_inter
 				GET_SYSTEM_PORT_STATUS,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				0x0000, 0x0000, &vub300->system_port_status,
-				sizeof(vub300->system_port_status), HZ);
+				sizeof(vub300->system_port_status), 1000);
 	if (retval < 0) {
 		goto error4;
 	} else if (sizeof(vub300->system_port_status) == retval) {

[PATCH 4.19 17/35] mmc: cqhci: clear HALT state after CQE enable

[Greg Kroah-Hartman]

From: Wenbin Mei <wenbin.mei@mediatek.com>

commit 92b18252b91de567cd875f2e84722b10ab34ee28 upstream.

While mmc0 enter suspend state, we need halt CQE to send legacy cmd(flush
cache) and disable cqe, for resume back, we enable CQE and not clear HALT
state.
In this case MediaTek mmc host controller will keep the value for HALT
state after CQE disable/enable flow, so the next CQE transfer after resume
will be timeout due to CQE is in HALT state, the log as below:
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: timeout for tag 2
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: ============ CQHCI REGISTER DUMP ===========
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Caps:      0x100020b6 | Version:  0x00000510
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Config:    0x00001103 | Control:  0x00000001
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int stat:  0x00000000 | Int enab: 0x00000006
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int sig:   0x00000006 | Int Coal: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: TDL base:  0xfd05f000 | TDL up32: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Doorbell:  0x8000203c | TCN:      0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Task clr:  0x00000000 | SSC1:     0x00001000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: SSC2:      0x00000001 | DCMD rsp: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: RED mask:  0xfdf9a080 | TERRI:    0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Resp idx:  0x00000000 | Resp arg: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQP:     0x00000000 | CRNQDUN:  0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQIS:    0x00000000 | CRNQIE:   0x00000000

This change check HALT state after CQE enable, if CQE is in HALT state, we
will clear it.

Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Link: https://lore.kernel.org/r/20211026070812.9359-1-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/cqhci.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/mmc/host/cqhci.c
+++ b/drivers/mmc/host/cqhci.c
@@ -281,6 +281,9 @@ static void __cqhci_enable(struct cqhci_
 
 	cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
 
+	if (cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT)
+		cqhci_writel(cq_host, 0, CQHCI_CTL);
+
 	mmc->cqe_on = true;
 
 	if (cq_host->ops->enable)

[PATCH 4.19 18/35] mmc: dw_mmc: exynos: fix the finding clock sample value

[Greg Kroah-Hartman]

From: Jaehoon Chung <jh80.chung@samsung.com>

commit 697542bceae51f7620af333b065dd09d213629fb upstream.

Even though there are candiates value if can't find best value, it's
returned -EIO. It's not proper behavior.
If there is not best value, use a first candiate value to work eMMC.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Cc: stable@vger.kernel.org
Fixes: c537a1c5ff63 ("mmc: dw_mmc: exynos: add variable delay tuning sequence")
Link: https://lore.kernel.org/r/20211022082106.1557-1-jh80.chung@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/dw_mmc-exynos.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -455,6 +455,18 @@ static s8 dw_mci_exynos_get_best_clksmpl
 		}
 	}
 
+	/*
+	 * If there is no cadiates value, then it needs to return -EIO.
+	 * If there are candiates values and don't find bset clk sample value,
+	 * then use a first candiates clock sample value.
+	 */
+	for (i = 0; i < iter; i++) {
+		__c = ror8(candiates, i);
+		if ((__c & 0x1) == 0x1) {
+			loc = i;
+			goto out;
+		}
+	}
 out:
 	return loc;
 }
@@ -485,6 +497,8 @@ static int dw_mci_exynos_execute_tuning(
 		priv->tuned_sample = found;
 	} else {
 		ret = -EIO;
+		dev_warn(&mmc->class_dev,
+			"There is no candiates value about clksmpl!\n");
 	}
 
 	return ret;

[PATCH 4.19 19/35] mmc: sdhci: Map more voltage level to SDHCI_POWER_330

[Greg Kroah-Hartman]

From: Shawn Guo <shawn.guo@linaro.org>

commit 4217d07b9fb328751f877d3bd9550122014860a2 upstream.

On Thundercomm TurboX CM2290, the eMMC OCR reports vdd = 23 (3.5 ~ 3.6 V),
which is being treated as an invalid value by sdhci_set_power_noreg().
And thus eMMC is totally broken on the platform.

[    1.436599] ------------[ cut here ]------------
[    1.436606] mmc0: Invalid vdd 0x17
[    1.436640] WARNING: CPU: 2 PID: 69 at drivers/mmc/host/sdhci.c:2048 sdhci_set_power_noreg+0x168/0x2b4
[    1.436655] Modules linked in:
[    1.436662] CPU: 2 PID: 69 Comm: kworker/u8:1 Tainted: G        W         5.15.0-rc1+ #137
[    1.436669] Hardware name: Thundercomm TurboX CM2290 (DT)
[    1.436674] Workqueue: events_unbound async_run_entry_fn
[    1.436685] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.436692] pc : sdhci_set_power_noreg+0x168/0x2b4
[    1.436698] lr : sdhci_set_power_noreg+0x168/0x2b4
[    1.436703] sp : ffff800010803a60
[    1.436705] x29: ffff800010803a60 x28: ffff6a9102465f00 x27: ffff6a9101720a70
[    1.436715] x26: ffff6a91014de1c0 x25: ffff6a91014de010 x24: ffff6a91016af280
[    1.436724] x23: ffffaf7b1b276640 x22: 0000000000000000 x21: ffff6a9101720000
[    1.436733] x20: ffff6a9101720370 x19: ffff6a9101720580 x18: 0000000000000020
[    1.436743] x17: 0000000000000000 x16: 0000000000000004 x15: ffffffffffffffff
[    1.436751] x14: 0000000000000000 x13: 00000000fffffffd x12: ffffaf7b1b84b0bc
[    1.436760] x11: ffffaf7b1b720d10 x10: 000000000000000a x9 : ffff800010803a60
[    1.436769] x8 : 000000000000000a x7 : 000000000000000f x6 : 00000000fffff159
[    1.436778] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
[    1.436787] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6a9101718d80
[    1.436797] Call trace:
[    1.436800]  sdhci_set_power_noreg+0x168/0x2b4
[    1.436805]  sdhci_set_ios+0xa0/0x7fc
[    1.436811]  mmc_power_up.part.0+0xc4/0x164
[    1.436818]  mmc_start_host+0xa0/0xb0
[    1.436824]  mmc_add_host+0x60/0x90
[    1.436830]  __sdhci_add_host+0x174/0x330
[    1.436836]  sdhci_msm_probe+0x7c0/0x920
[    1.436842]  platform_probe+0x68/0xe0
[    1.436850]  really_probe.part.0+0x9c/0x31c
[    1.436857]  __driver_probe_device+0x98/0x144
[    1.436863]  driver_probe_device+0xc8/0x15c
[    1.436869]  __device_attach_driver+0xb4/0x120
[    1.436875]  bus_for_each_drv+0x78/0xd0
[    1.436881]  __device_attach_async_helper+0xac/0xd0
[    1.436888]  async_run_entry_fn+0x34/0x110
[    1.436895]  process_one_work+0x1d0/0x354
[    1.436903]  worker_thread+0x13c/0x470
[    1.436910]  kthread+0x150/0x160
[    1.436915]  ret_from_fork+0x10/0x20
[    1.436923] ---[ end trace fcfac44cb045c3a8 ]---

Fix the issue by mapping MMC_VDD_35_36 (and MMC_VDD_34_35) to
SDHCI_POWER_330 as well.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211004024935.15326-1-shawn.guo@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1578,6 +1578,12 @@ void sdhci_set_power_noreg(struct sdhci_
 			break;
 		case MMC_VDD_32_33:
 		case MMC_VDD_33_34:
+		/*
+		 * 3.4 ~ 3.6V are valid only for those platforms where it's
+		 * known that the voltage range is supported by hardware.
+		 */
+		case MMC_VDD_34_35:
+		case MMC_VDD_35_36:
 			pwr = SDHCI_POWER_330;
 			break;
 		default:

[PATCH 4.19 20/35] mmc: sdhci-esdhc-imx: clear the buffer_read_ready to reset standard tuning circuit

[Greg Kroah-Hartman]

From: Haibo Chen <haibo.chen@nxp.com>

commit 9af372dc70e9fdcbb70939dac75365e7b88580b4 upstream.

To reset standard tuning circuit completely, after clear ESDHC_MIX_CTRL_EXE_TUNE,
also need to clear bit buffer_read_ready, this operation will finally clear the
USDHC IP internal logic flag execute_tuning_with_clr_buf, make sure the following
normal data transfer will not be impacted by standard tuning logic used before.

Find this issue when do quick SD card insert/remove stress test. During standard
tuning prodedure, if remove SD card, USDHC standard tuning logic can't clear the
internal flag execute_tuning_with_clr_buf. Next time when insert SD card, all
data related commands can't get any data related interrupts, include data transfer
complete interrupt, data timeout interrupt, data CRC interrupt, data end bit interrupt.
Always trigger software timeout issue. Even reset the USDHC through bits in register
SYS_CTRL (0x2C, bit28 reset tuning, bit26 reset data, bit 25 reset command, bit 24
reset all) can't recover this. From the user's point of view, USDHC stuck, SD can't
be recognized any more.

Fixes: d9370424c948 ("mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1634263236-6111-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -947,6 +947,7 @@ static void esdhc_reset_tuning(struct sd
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
 	u32 ctrl;
+	int ret;
 
 	/* Reset the tuning circuit */
 	if (esdhc_is_usdhc(imx_data)) {
@@ -959,7 +960,22 @@ static void esdhc_reset_tuning(struct sd
 		} else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
 			ctrl = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS);
 			ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
+			ctrl &= ~ESDHC_MIX_CTRL_EXE_TUNE;
 			writel(ctrl, host->ioaddr + SDHCI_AUTO_CMD_STATUS);
+			/* Make sure ESDHC_MIX_CTRL_EXE_TUNE cleared */
+			ret = readl_poll_timeout(host->ioaddr + SDHCI_AUTO_CMD_STATUS,
+				ctrl, !(ctrl & ESDHC_MIX_CTRL_EXE_TUNE), 1, 50);
+			if (ret == -ETIMEDOUT)
+				dev_warn(mmc_dev(host->mmc),
+				 "Warning! clear execute tuning bit failed\n");
+			/*
+			 * SDHCI_INT_DATA_AVAIL is W1C bit, set this bit will clear the
+			 * usdhc IP internal logic flag execute_tuning_with_clr_buf, which
+			 * will finally make sure the normal data transfer logic correct.
+			 */
+			ctrl = readl(host->ioaddr + SDHCI_INT_STATUS);
+			ctrl |= SDHCI_INT_DATA_AVAIL;
+			writel(ctrl, host->ioaddr + SDHCI_INT_STATUS);
 		}
 	}
 }

[PATCH 4.19 21/35] net: lan78xx: fix division by zero in send path

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit db6c3c064f5d55fa9969f33eafca3cdbefbb3541 upstream.

Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in lan78xx_tx_bh() in case a malicious device has
broken descriptors (or when doing descriptor fuzz testing).

Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: stable@vger.kernel.org      # 4.3
Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/lan78xx.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -3772,6 +3772,12 @@ static int lan78xx_probe(struct usb_inte
 
 	dev->maxpacket = usb_maxpacket(dev->udev, dev->pipe_out, 1);
 
+	/* Reject broken descriptors. */
+	if (dev->maxpacket == 0) {
+		ret = -ENODEV;
+		goto out4;
+	}
+
 	/* driver requires remote-wakeup capability during autosuspend. */
 	intf->needs_remote_wakeup = 1;
 

[PATCH 4.19 22/35] RDMA/mlx5: Set user priority for DCT

[Greg Kroah-Hartman]

From: Patrisious Haddad <phaddad@nvidia.com>

commit 1ab52ac1e9bc9391f592c9fa8340a6e3e9c36286 upstream.

Currently, the driver doesn't set the PCP-based priority for DCT, hence
DCT response packets are transmitted without user priority.

Fix it by setting user provided priority in the eth_prio field in the DCT
context, which in turn sets the value in the transmitted packet.

Fixes: 776a3906b692 ("IB/mlx5: Add support for DC target QP")
Link: https://lore.kernel.org/r/5fd2d94a13f5742d8803c218927322257d53205c.1633512672.git.leonro@nvidia.com
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/mlx5/qp.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -3387,6 +3387,8 @@ static int mlx5_ib_modify_dct(struct ib_
 		MLX5_SET(dctc, dctc, mtu, attr->path_mtu);
 		MLX5_SET(dctc, dctc, my_addr_index, attr->ah_attr.grh.sgid_index);
 		MLX5_SET(dctc, dctc, hop_limit, attr->ah_attr.grh.hop_limit);
+		if (attr->ah_attr.type == RDMA_AH_ATTR_TYPE_ROCE)
+			MLX5_SET(dctc, dctc, eth_prio, attr->ah_attr.sl & 0x7);
 
 		err = mlx5_core_create_dct(dev->mdev, &qp->dct.mdct, qp->dct.in,
 					   MLX5_ST_SZ_BYTES(create_dct_in));

[PATCH 4.19 23/35] arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node

[Greg Kroah-Hartman]

From: Clément Bœsch <u@pkh.me>

commit 0764e365dacd0b8f75c1736f9236be280649bd18 upstream.

RX and TX delay are provided by ethernet PHY. Reflect that in ethernet
node.

Fixes: 44a94c7ef989 ("arm64: dts: allwinner: H5: Restore EMAC changes")
Signed-off-by: Clément Bœsch <u@pkh.me>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210905002027.171984-1-u@pkh.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -114,7 +114,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

[PATCH 4.19 24/35] regmap: Fix possible double-free in regcache_rbtree_exit()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

commit 55e6d8037805b3400096d621091dfbf713f97e83 upstream.

In regcache_rbtree_insert_to_block(), when 'present' realloc failed,
the 'blk' which is supposed to assign to 'rbnode->block' will be freed,
so 'rbnode->block' points a freed memory, in the error handling path of
regcache_rbtree_init(), 'rbnode->block' will be freed again in
regcache_rbtree_exit(), KASAN will report double-free as follows:

BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390
Call Trace:
 slab_free_freelist_hook+0x10d/0x240
 kfree+0xce/0x390
 regcache_rbtree_exit+0x15d/0x1a0
 regcache_rbtree_init+0x224/0x2c0
 regcache_init+0x88d/0x1310
 __regmap_init+0x3151/0x4a80
 __devm_regmap_init+0x7d/0x100
 madera_spi_probe+0x10f/0x333 [madera_spi]
 spi_probe+0x183/0x210
 really_probe+0x285/0xc30

To fix this, moving up the assignment of rbnode->block to immediately after
the reallocation has succeeded so that the data structure stays valid even
if the second reallocation fails.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 3f4ff561bc88b ("regmap: rbtree: Make cache_present bitmap per node")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211012023735.1632786-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/base/regmap/regcache-rbtree.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/base/regmap/regcache-rbtree.c
+++ b/drivers/base/regmap/regcache-rbtree.c
@@ -295,14 +295,14 @@ static int regcache_rbtree_insert_to_blo
 	if (!blk)
 		return -ENOMEM;
 
+	rbnode->block = blk;
+
 	if (BITS_TO_LONGS(blklen) > BITS_TO_LONGS(rbnode->blklen)) {
 		present = krealloc(rbnode->cache_present,
 				   BITS_TO_LONGS(blklen) * sizeof(*present),
 				   GFP_KERNEL);
-		if (!present) {
-			kfree(blk);
+		if (!present)
 			return -ENOMEM;
-		}
 
 		memset(present + BITS_TO_LONGS(rbnode->blklen), 0,
 		       (BITS_TO_LONGS(blklen) - BITS_TO_LONGS(rbnode->blklen))
@@ -319,7 +319,6 @@ static int regcache_rbtree_insert_to_blo
 	}
 
 	/* update the rbnode block, its size and the base register */
-	rbnode->block = blk;
 	rbnode->blklen = blklen;
 	rbnode->base_reg = base_reg;
 	rbnode->cache_present = present;

[PATCH 4.19 25/35] net: batman-adv: fix error handling

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit 6f68cd634856f8ca93bafd623ba5357e0f648c68 upstream.

Syzbot reported ODEBUG warning in batadv_nc_mesh_free(). The problem was
in wrong error handling in batadv_mesh_init().

Before this patch batadv_mesh_init() was calling batadv_mesh_free() in case
of any batadv_*_init() calls failure. This approach may work well, when
there is some kind of indicator, which can tell which parts of batadv are
initialized; but there isn't any.

All written above lead to cleaning up uninitialized fields. Even if we hide
ODEBUG warning by initializing bat_priv->nc.work, syzbot was able to hit
GPF in batadv_nc_purge_paths(), because hash pointer in still NULL. [1]

To fix these bugs we can unwind batadv_*_init() calls one by one.
It is good approach for 2 reasons: 1) It fixes bugs on error handling
path 2) It improves the performance, since we won't call unneeded
batadv_*_free() functions.

So, this patch makes all batadv_*_init() clean up all allocated memory
before returning with an error to no call correspoing batadv_*_free()
and open-codes batadv_mesh_free() with proper order to avoid touching
uninitialized fields.

Link: https://lore.kernel.org/netdev/000000000000c87fbd05cef6bcb0@google.com/ [1]
Reported-and-tested-by: syzbot+28b0702ada0bf7381f58@syzkaller.appspotmail.com
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/batman-adv/bridge_loop_avoidance.c |    8 +++-
 net/batman-adv/main.c                  |   56 +++++++++++++++++++++++----------
 net/batman-adv/network-coding.c        |    4 +-
 net/batman-adv/translation-table.c     |    4 +-
 4 files changed, 52 insertions(+), 20 deletions(-)

--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -1574,10 +1574,14 @@ int batadv_bla_init(struct batadv_priv *
 		return 0;
 
 	bat_priv->bla.claim_hash = batadv_hash_new(128);
-	bat_priv->bla.backbone_hash = batadv_hash_new(32);
+	if (!bat_priv->bla.claim_hash)
+		return -ENOMEM;
 
-	if (!bat_priv->bla.claim_hash || !bat_priv->bla.backbone_hash)
+	bat_priv->bla.backbone_hash = batadv_hash_new(32);
+	if (!bat_priv->bla.backbone_hash) {
+		batadv_hash_destroy(bat_priv->bla.claim_hash);
 		return -ENOMEM;
+	}
 
 	batadv_hash_set_lock_class(bat_priv->bla.claim_hash,
 				   &batadv_claim_hash_lock_class_key);
--- a/net/batman-adv/main.c
+++ b/net/batman-adv/main.c
@@ -187,29 +187,41 @@ int batadv_mesh_init(struct net_device *
 	INIT_HLIST_HEAD(&bat_priv->softif_vlan_list);
 	INIT_HLIST_HEAD(&bat_priv->tp_list);
 
-	ret = batadv_v_mesh_init(bat_priv);
-	if (ret < 0)
-		goto err;
-
 	ret = batadv_originator_init(bat_priv);
-	if (ret < 0)
-		goto err;
+	if (ret < 0) {
+		atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
+		goto err_orig;
+	}
 
 	ret = batadv_tt_init(bat_priv);
-	if (ret < 0)
-		goto err;
+	if (ret < 0) {
+		atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
+		goto err_tt;
+	}
+
+	ret = batadv_v_mesh_init(bat_priv);
+	if (ret < 0) {
+		atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
+		goto err_v;
+	}
 
 	ret = batadv_bla_init(bat_priv);
-	if (ret < 0)
-		goto err;
+	if (ret < 0) {
+		atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
+		goto err_bla;
+	}
 
 	ret = batadv_dat_init(bat_priv);
-	if (ret < 0)
-		goto err;
+	if (ret < 0) {
+		atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
+		goto err_dat;
+	}
 
 	ret = batadv_nc_mesh_init(bat_priv);
-	if (ret < 0)
-		goto err;
+	if (ret < 0) {
+		atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
+		goto err_nc;
+	}
 
 	batadv_gw_init(bat_priv);
 	batadv_mcast_init(bat_priv);
@@ -219,8 +231,20 @@ int batadv_mesh_init(struct net_device *
 
 	return 0;
 
-err:
-	batadv_mesh_free(soft_iface);
+err_nc:
+	batadv_dat_free(bat_priv);
+err_dat:
+	batadv_bla_free(bat_priv);
+err_bla:
+	batadv_v_mesh_free(bat_priv);
+err_v:
+	batadv_tt_free(bat_priv);
+err_tt:
+	batadv_originator_free(bat_priv);
+err_orig:
+	batadv_purge_outstanding_packets(bat_priv, NULL);
+	atomic_set(&bat_priv->mesh_state, BATADV_MESH_INACTIVE);
+
 	return ret;
 }
 
--- a/net/batman-adv/network-coding.c
+++ b/net/batman-adv/network-coding.c
@@ -167,8 +167,10 @@ int batadv_nc_mesh_init(struct batadv_pr
 				   &batadv_nc_coding_hash_lock_class_key);
 
 	bat_priv->nc.decoding_hash = batadv_hash_new(128);
-	if (!bat_priv->nc.decoding_hash)
+	if (!bat_priv->nc.decoding_hash) {
+		batadv_hash_destroy(bat_priv->nc.coding_hash);
 		goto err;
+	}
 
 	batadv_hash_set_lock_class(bat_priv->nc.decoding_hash,
 				   &batadv_nc_decoding_hash_lock_class_key);
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -4413,8 +4413,10 @@ int batadv_tt_init(struct batadv_priv *b
 		return ret;
 
 	ret = batadv_tt_global_init(bat_priv);
-	if (ret < 0)
+	if (ret < 0) {
+		batadv_tt_local_table_free(bat_priv);
 		return ret;
+	}
 
 	batadv_tvlv_handler_register(bat_priv, batadv_tt_tvlv_ogm_handler_v1,
 				     batadv_tt_tvlv_unicast_handler_v1,

[PATCH 4.19 26/35] net: Prevent infinite while loop in skb_tx_hash()

[Greg Kroah-Hartman]

From: Michael Chan <michael.chan@broadcom.com>

commit 0c57eeecc559ca6bc18b8c4e2808bc78dbe769b0 upstream.

Drivers call netdev_set_num_tc() and then netdev_set_tc_queue()
to set the queue count and offset for each TC.  So the queue count
and offset for the TCs may be zero for a short period after dev->num_tc
has been set.  If a TX packet is being transmitted at this time in the
code path netdev_pick_tx() -> skb_tx_hash(), skb_tx_hash() may see
nonzero dev->num_tc but zero qcount for the TC.  The while loop that
keeps looping while hash >= qcount will not end.

Fix it by checking the TC's qcount to be nonzero before using it.

Fixes: eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2846,6 +2846,12 @@ static u16 skb_tx_hash(const struct net_
 
 		qoffset = sb_dev->tc_to_txq[tc].offset;
 		qcount = sb_dev->tc_to_txq[tc].count;
+		if (unlikely(!qcount)) {
+			net_warn_ratelimited("%s: invalid qcount, qoffset %u for tc %u\n",
+					     sb_dev->name, qoffset, tc);
+			qoffset = 0;
+			qcount = dev->real_num_tx_queues;
+		}
 	}
 
 	if (skb_rx_queue_recorded(skb)) {

[PATCH 4.19 27/35] nios2: Make NIOS2_DTB_SOURCE_BOOL depend on !COMPILE_TEST

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

commit 4a089e95b4d6bb625044d47aed0c442a8f7bd093 upstream.

nios2:allmodconfig builds fail with

make[1]: *** No rule to make target 'arch/nios2/boot/dts/""',
	needed by 'arch/nios2/boot/dts/built-in.a'.  Stop.
make: [Makefile:1868: arch/nios2/boot/dts] Error 2 (ignored)

This is seen with compile tests since those enable NIOS2_DTB_SOURCE_BOOL,
which in turn enables NIOS2_DTB_SOURCE. This causes the build error
because the default value for NIOS2_DTB_SOURCE is an empty string.
Disable NIOS2_DTB_SOURCE_BOOL for compile tests to avoid the error.

Fixes: 2fc8483fdcde ("nios2: Build infrastructure")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/nios2/platform/Kconfig.platform |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/nios2/platform/Kconfig.platform
+++ b/arch/nios2/platform/Kconfig.platform
@@ -37,6 +37,7 @@ config NIOS2_DTB_PHYS_ADDR
 
 config NIOS2_DTB_SOURCE_BOOL
 	bool "Compile and link device tree into kernel image"
+	depends on !COMPILE_TEST
 	default n
 	help
 	  This allows you to specify a dts (device tree source) file

[PATCH 4.19 28/35] net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume fails

[Greg Kroah-Hartman]

From: Yuiko Oshino <yuiko.oshino@microchip.com>

commit d6423d2ec39cce2bfca418c81ef51792891576bc upstream.

The driver needs to clean up and return when the initialization fails on resume.

Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/microchip/lan743x_main.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -3003,6 +3003,8 @@ static int lan743x_pm_resume(struct devi
 	if (ret) {
 		netif_err(adapter, probe, adapter->netdev,
 			  "lan743x_hardware_init returned %d\n", ret);
+		lan743x_pci_cleanup(adapter);
+		return ret;
 	}
 
 	/* open netdev when netdev is at running state while resume.

[PATCH 4.19 29/35] net: ethernet: microchip: lan743x: Fix dma allocation failure by using dma_set_mask_and_coherent

[Greg Kroah-Hartman]

From: Yuiko Oshino <yuiko.oshino@microchip.com>

commit 95a359c9553342d36d408d35331ff0bfce75272f upstream.

The dma failure was reported in the raspberry pi github (issue #4117).
https://github.com/raspberrypi/linux/issues/4117
The use of dma_set_mask_and_coherent fixes the issue.
Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430.

Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/microchip/lan743x_main.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -1710,6 +1710,16 @@ static int lan743x_tx_ring_init(struct l
 		ret = -EINVAL;
 		goto cleanup;
 	}
+	if (dma_set_mask_and_coherent(&tx->adapter->pdev->dev,
+				      DMA_BIT_MASK(64))) {
+		if (dma_set_mask_and_coherent(&tx->adapter->pdev->dev,
+					      DMA_BIT_MASK(32))) {
+			dev_warn(&tx->adapter->pdev->dev,
+				 "lan743x_: No suitable DMA available\n");
+			ret = -ENOMEM;
+			goto cleanup;
+		}
+	}
 	ring_allocation_size = ALIGN(tx->ring_size *
 				     sizeof(struct lan743x_tx_descriptor),
 				     PAGE_SIZE);
@@ -2258,6 +2268,16 @@ static int lan743x_rx_ring_init(struct l
 		ret = -EINVAL;
 		goto cleanup;
 	}
+	if (dma_set_mask_and_coherent(&rx->adapter->pdev->dev,
+				      DMA_BIT_MASK(64))) {
+		if (dma_set_mask_and_coherent(&rx->adapter->pdev->dev,
+					      DMA_BIT_MASK(32))) {
+			dev_warn(&rx->adapter->pdev->dev,
+				 "lan743x_: No suitable DMA available\n");
+			ret = -ENOMEM;
+			goto cleanup;
+		}
+	}
 	ring_allocation_size = ALIGN(rx->ring_size *
 				     sizeof(struct lan743x_rx_descriptor),
 				     PAGE_SIZE);

[PATCH 4.19 30/35] net: nxp: lpc_eth.c: avoid hang when bringing interface down

[Greg Kroah-Hartman]

From: Trevor Woerner <twoerner@gmail.com>

commit ace19b992436a257d9a793672e57abc28fe83e2e upstream.

A hard hang is observed whenever the ethernet interface is brought
down. If the PHY is stopped before the LPC core block is reset,
the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I
re-arranged the ordering of the functions calls in lpc_eth_close() to
reset the hardware before stopping the PHY.
Fixes: b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/nxp/lpc_eth.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -1037,9 +1037,6 @@ static int lpc_eth_close(struct net_devi
 	napi_disable(&pldat->napi);
 	netif_stop_queue(ndev);
 
-	if (ndev->phydev)
-		phy_stop(ndev->phydev);
-
 	spin_lock_irqsave(&pldat->lock, flags);
 	__lpc_eth_reset(pldat);
 	netif_carrier_off(ndev);
@@ -1047,6 +1044,8 @@ static int lpc_eth_close(struct net_devi
 	writel(0, LPC_ENET_MAC2(pldat->net_base));
 	spin_unlock_irqrestore(&pldat->lock, flags);
 
+	if (ndev->phydev)
+		phy_stop(ndev->phydev);
 	clk_disable_unprepare(pldat->clk);
 
 	return 0;

[PATCH 4.19 31/35] sctp: use init_tag from inithdr for ABORT chunk

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 4f7019c7eb33967eb87766e0e4602b5576873680 ]

Currently Linux SCTP uses the verification tag of the existing SCTP
asoc when failing to process and sending the packet with the ABORT
chunk. This will result in the peer accepting the ABORT chunk and
removing the SCTP asoc. One could exploit this to terminate a SCTP
asoc.

This patch is to fix it by always using the initiate tag of the
received INIT chunk for the ABORT chunk to be sent.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/sm_statefuns.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index be5ea5e8b19e..f57fbe79490a 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -6261,6 +6261,7 @@ static struct sctp_packet *sctp_ootb_pkt_new(
 		 * yet.
 		 */
 		switch (chunk->chunk_hdr->type) {
+		case SCTP_CID_INIT:
 		case SCTP_CID_INIT_ACK:
 		{
 			struct sctp_initack_chunk *initack;
-- 
2.33.0

[PATCH 4.19 32/35] sctp: fix the processing for COOKIE_ECHO chunk

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit a64b341b8695e1c744dd972b39868371b4f68f83 ]

1. In closed state: in sctp_sf_do_5_1D_ce():

  When asoc is NULL, making packet for abort will use chunk's vtag
  in sctp_ootb_pkt_new(). But when asoc exists, vtag from the chunk
  should be verified before using peer.i.init_tag to make packet
  for abort in sctp_ootb_pkt_new(), and just discard it if vtag is
  not correct.

2. In the other states: in sctp_sf_do_5_2_4_dupcook():

  asoc always exists, but duplicate cookie_echo's vtag will be
  handled by sctp_tietags_compare() and then take actions, so before
  that we only verify the vtag for the abort sent for invalid chunk
  length.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/sm_statefuns.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index f57fbe79490a..e93aa08d2a78 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -712,6 +712,9 @@ enum sctp_disposition sctp_sf_do_5_1D_ce(struct net *net,
 	struct sock *sk;
 	int error = 0;
 
+	if (asoc && !sctp_vtag_verify(chunk, asoc))
+		return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
+
 	/* If the packet is an OOTB packet which is temporarily on the
 	 * control endpoint, respond with an ABORT.
 	 */
@@ -726,7 +729,8 @@ enum sctp_disposition sctp_sf_do_5_1D_ce(struct net *net,
 	 * in sctp_unpack_cookie().
 	 */
 	if (!sctp_chunk_length_valid(chunk, sizeof(struct sctp_chunkhdr)))
-		return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
+		return sctp_sf_violation_chunklen(net, ep, asoc, type, arg,
+						  commands);
 
 	/* If the endpoint is not listening or if the number of associations
 	 * on the TCP-style socket exceed the max backlog, respond with an
@@ -2156,9 +2160,11 @@ enum sctp_disposition sctp_sf_do_5_2_4_dupcook(
 	 * enough for the chunk header.  Cookie length verification is
 	 * done later.
 	 */
-	if (!sctp_chunk_length_valid(chunk, sizeof(struct sctp_chunkhdr)))
-		return sctp_sf_violation_chunklen(net, ep, asoc, type, arg,
-						  commands);
+	if (!sctp_chunk_length_valid(chunk, sizeof(struct sctp_chunkhdr))) {
+		if (!sctp_vtag_verify(chunk, asoc))
+			asoc = NULL;
+		return sctp_sf_violation_chunklen(net, ep, asoc, type, arg, commands);
+	}
 
 	/* "Decode" the chunk.  We have no optional parameters so we
 	 * are in good shape.
-- 
2.33.0

[PATCH 4.19 33/35] sctp: add vtag check in sctp_sf_violation

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit aa0f697e45286a6b5f0ceca9418acf54b9099d99 ]

sctp_sf_violation() is called when processing HEARTBEAT_ACK chunk
in cookie_wait state, and some other places are also using it.

The vtag in the chunk's sctphdr should be verified, otherwise, as
later in chunk length check, it may send abort with the existent
asoc's vtag, which can be exploited by one to cook a malicious
chunk to terminate a SCTP asoc.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/sm_statefuns.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index e93aa08d2a78..a4874b55faab 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -4561,6 +4561,9 @@ enum sctp_disposition sctp_sf_violation(struct net *net,
 {
 	struct sctp_chunk *chunk = arg;
 
+	if (!sctp_vtag_verify(chunk, asoc))
+		return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
+
 	/* Make sure that the chunk has a valid length. */
 	if (!sctp_chunk_length_valid(chunk, sizeof(struct sctp_chunkhdr)))
 		return sctp_sf_violation_chunklen(net, ep, asoc, type, arg,
-- 
2.33.0

[PATCH 4.19 34/35] sctp: add vtag check in sctp_sf_do_8_5_1_E_sa

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit ef16b1734f0a176277b7bb9c71a6d977a6ef3998 ]

sctp_sf_do_8_5_1_E_sa() is called when processing SHUTDOWN_ACK chunk
in cookie_wait and cookie_echoed state.

The vtag in the chunk's sctphdr should be verified, otherwise, as
later in chunk length check, it may send abort with the existent
asoc's vtag, which can be exploited by one to cook a malicious
chunk to terminate a SCTP asoc.

Note that when fails to verify the vtag from SHUTDOWN-ACK chunk,
SHUTDOWN COMPLETE message will still be sent back to peer, but
with the vtag from SHUTDOWN-ACK chunk, as said in 5) of
rfc4960#section-8.4.

While at it, also remove the unnecessary chunk length check from
sctp_sf_shut_8_4_5(), as it's already done in both places where
it calls sctp_sf_shut_8_4_5().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/sm_statefuns.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index a4874b55faab..2995d00bd5d0 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -3698,12 +3698,6 @@ static enum sctp_disposition sctp_sf_shut_8_4_5(
 
 	SCTP_INC_STATS(net, SCTP_MIB_OUTCTRLCHUNKS);
 
-	/* If the chunk length is invalid, we don't want to process
-	 * the reset of the packet.
-	 */
-	if (!sctp_chunk_length_valid(chunk, sizeof(struct sctp_chunkhdr)))
-		return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
-
 	/* We need to discard the rest of the packet to prevent
 	 * potential bomming attacks from additional bundled chunks.
 	 * This is documented in SCTP Threats ID.
@@ -3731,6 +3725,9 @@ enum sctp_disposition sctp_sf_do_8_5_1_E_sa(struct net *net,
 {
 	struct sctp_chunk *chunk = arg;
 
+	if (!sctp_vtag_verify(chunk, asoc))
+		asoc = NULL;
+
 	/* Make sure that the SHUTDOWN_ACK chunk has a valid length. */
 	if (!sctp_chunk_length_valid(chunk, sizeof(struct sctp_chunkhdr)))
 		return sctp_sf_violation_chunklen(net, ep, asoc, type, arg,
-- 
2.33.0

[PATCH 4.19 35/35] sctp: add vtag check in sctp_sf_ootb

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 9d02831e517aa36ee6bdb453a0eb47bd49923fe3 ]

sctp_sf_ootb() is called when processing DATA chunk in closed state,
and many other places are also using it.

The vtag in the chunk's sctphdr should be verified, otherwise, as
later in chunk length check, it may send abort with the existent
asoc's vtag, which can be exploited by one to cook a malicious
chunk to terminate a SCTP asoc.

When fails to verify the vtag from the chunk, this patch sets asoc
to NULL, so that the abort will be made with the vtag from the
received chunk later.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/sm_statefuns.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 2995d00bd5d0..ebca069064df 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -3583,6 +3583,9 @@ enum sctp_disposition sctp_sf_ootb(struct net *net,
 
 	SCTP_INC_STATS(net, SCTP_MIB_OUTOFBLUES);
 
+	if (asoc && !sctp_vtag_verify(chunk, asoc))
+		asoc = NULL;
+
 	ch = (struct sctp_chunkhdr *)chunk->chunk_hdr;
 	do {
 		/* Report violation if the chunk is less then minimal */
-- 
2.33.0

Re: [PATCH 4.19 00/35] 4.19.215-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1079 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.215 release.
> There are 35 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

I'm getting some failures on 4.19.215-rc1, and at least this one is real:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/1734614739

  CC      drivers/mtd/nand/raw/nand_samsung.o
3313drivers/mmc/host/sdhci-esdhc-imx.c: In function 'esdhc_reset_tuning':
3314drivers/mmc/host/sdhci-esdhc-imx.c:966:10: error: implicit declaration of function 'readl_poll_timeout'; did you mean 'key_set_timeout'? [-Werror=implicit-function-declaration]
3315    ret = readl_poll_timeout(host->ioaddr + SDHCI_AUTO_CMD_STATUS,
3316          ^~~~~~~~~~~~~~~~~~
3317          key_set_timeout
3318  AR      drivers/pci/controller/dwc/built-in.a

Best regards,
							Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 00/35] 4.19.215-rc1 review

[Greg Kroah-Hartman]

On Mon, Nov 01, 2021 at 11:37:32AM +0100, Pavel Machek wrote:
> Hi!
> 
> > This is the start of the stable review cycle for the 4.19.215 release.
> > There are 35 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> 
> I'm getting some failures on 4.19.215-rc1, and at least this one is real:
> 
> https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/1734614739
> 
>   CC      drivers/mtd/nand/raw/nand_samsung.o
> 3313drivers/mmc/host/sdhci-esdhc-imx.c: In function 'esdhc_reset_tuning':
> 3314drivers/mmc/host/sdhci-esdhc-imx.c:966:10: error: implicit declaration of function 'readl_poll_timeout'; did you mean 'key_set_timeout'? [-Werror=implicit-function-declaration]
> 3315    ret = readl_poll_timeout(host->ioaddr + SDHCI_AUTO_CMD_STATUS,
> 3316          ^~~~~~~~~~~~~~~~~~
> 3317          key_set_timeout
> 3318  AR      drivers/pci/controller/dwc/built-in.a

Thanks, let me go fix this and push out -rc2...