From: jae.hyun.yoo@intel.com To: Rob Herring <robh+dt@kernel.org>, Corey Minyard <minyard@acm.org>, Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>, Cedric Le Goater <clg@kaod.org>, Haiyue Wang <haiyue.wang@linux.intel.com>, Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, openipmi-developer@lists.sourceforge.net Subject: [PATCH -next 0/4] Add LCLK control into Aspeed LPC sub drivers Date: Mon, 1 Nov 2021 16:37:47 -0700 [thread overview] Message-ID: <20211101233751.49222-1-jae.hyun.yoo@intel.com> (raw) From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Hello all, This series is for appliying below fix to all Aspped LPC sub drivers. https://lore.kernel.org/all/20201208091748.1920-1-wangzhiqiang.bj@bytedance.com/ An LPC sub driver can be enabled without using the lpc-ctrl driver or it can be registered ahead of lpc-ctrl depends on each system configuration and this difference introduces that LPC can be enabled without heart beating of LCLK so it causes improper handling on host interrupts when the host sends interrupts in that time frame. Then kernel eventually forcibly disables the interrupt with dumping stack and printing a 'nobody cared this irq' message out. To prevent this issue, all LPC sub drivers should enable LCLK individually so this patch adds clock control logic into the remaining Aspeed LPC sub drivers. Please review this series. Thanks, Jae Jae Hyun Yoo (4): ARM: dts: aspeed: add LCLK setting into LPC IBT node ipmi: bt: add clock control logic ARM: dts: aspeed: add LCLK setting into LPC KCS nodes ipmi: kcs_bmc_aspeed: add clock control logic arch/arm/boot/dts/aspeed-g4.dtsi | 1 + arch/arm/boot/dts/aspeed-g5.dtsi | 5 +++++ arch/arm/boot/dts/aspeed-g6.dtsi | 5 +++++ drivers/char/ipmi/bt-bmc.c | 24 ++++++++++++++++++++++- drivers/char/ipmi/kcs_bmc_aspeed.c | 31 ++++++++++++++++++++++++++---- 5 files changed, 61 insertions(+), 5 deletions(-) -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: jae.hyun.yoo@intel.com To: Rob Herring <robh+dt@kernel.org>, Corey Minyard <minyard@acm.org>, Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>, Cedric Le Goater <clg@kaod.org>, Haiyue Wang <haiyue.wang@linux.intel.com>, Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, openipmi-developer@lists.sourceforge.net Subject: [PATCH -next 0/4] Add LCLK control into Aspeed LPC sub drivers Date: Mon, 1 Nov 2021 16:37:47 -0700 [thread overview] Message-ID: <20211101233751.49222-1-jae.hyun.yoo@intel.com> (raw) From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Hello all, This series is for appliying below fix to all Aspped LPC sub drivers. https://lore.kernel.org/all/20201208091748.1920-1-wangzhiqiang.bj@bytedance.com/ An LPC sub driver can be enabled without using the lpc-ctrl driver or it can be registered ahead of lpc-ctrl depends on each system configuration and this difference introduces that LPC can be enabled without heart beating of LCLK so it causes improper handling on host interrupts when the host sends interrupts in that time frame. Then kernel eventually forcibly disables the interrupt with dumping stack and printing a 'nobody cared this irq' message out. To prevent this issue, all LPC sub drivers should enable LCLK individually so this patch adds clock control logic into the remaining Aspeed LPC sub drivers. Please review this series. Thanks, Jae Jae Hyun Yoo (4): ARM: dts: aspeed: add LCLK setting into LPC IBT node ipmi: bt: add clock control logic ARM: dts: aspeed: add LCLK setting into LPC KCS nodes ipmi: kcs_bmc_aspeed: add clock control logic arch/arm/boot/dts/aspeed-g4.dtsi | 1 + arch/arm/boot/dts/aspeed-g5.dtsi | 5 +++++ arch/arm/boot/dts/aspeed-g6.dtsi | 5 +++++ drivers/char/ipmi/bt-bmc.c | 24 ++++++++++++++++++++++- drivers/char/ipmi/kcs_bmc_aspeed.c | 31 ++++++++++++++++++++++++++---- 5 files changed, 61 insertions(+), 5 deletions(-) -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-11-01 23:18 UTC|newest] Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-01 23:37 jae.hyun.yoo [this message] 2021-11-01 23:37 ` [PATCH -next 0/4] Add LCLK control into Aspeed LPC sub drivers jae.hyun.yoo 2021-11-01 23:36 ` Joel Stanley 2021-11-01 23:36 ` Joel Stanley 2021-11-02 12:22 ` Corey Minyard 2021-11-02 12:22 ` Corey Minyard 2021-11-02 16:38 ` Jae Hyun Yoo 2021-11-02 16:38 ` Jae Hyun Yoo 2021-11-03 0:04 ` Zev Weiss 2021-11-03 0:04 ` Zev Weiss 2021-11-03 0:17 ` Jae Hyun Yoo 2021-11-03 0:17 ` Jae Hyun Yoo 2021-11-03 0:30 ` Zev Weiss 2021-11-03 0:30 ` Zev Weiss 2021-11-03 0:54 ` Jae Hyun Yoo 2021-11-03 0:54 ` Jae Hyun Yoo 2021-11-03 1:09 ` Zev Weiss 2021-11-03 1:09 ` Zev Weiss 2021-11-03 15:56 ` Jae Hyun Yoo 2021-11-03 15:56 ` Jae Hyun Yoo 2021-11-04 1:48 ` Zev Weiss 2021-11-04 1:48 ` Zev Weiss 2021-11-04 16:09 ` Jae Hyun Yoo 2021-11-04 16:09 ` Jae Hyun Yoo 2021-11-01 23:37 ` [PATCH -next 1/4] ARM: dts: aspeed: add LCLK setting into LPC IBT node jae.hyun.yoo 2021-11-01 23:37 ` jae.hyun.yoo 2021-11-01 23:33 ` Joel Stanley 2021-11-01 23:33 ` Joel Stanley 2021-11-01 23:48 ` Jae Hyun Yoo 2021-11-01 23:48 ` Jae Hyun Yoo 2021-11-01 23:52 ` Joel Stanley 2021-11-01 23:52 ` Joel Stanley 2021-11-01 23:59 ` Jae Hyun Yoo 2021-11-01 23:59 ` Jae Hyun Yoo 2021-11-02 22:21 ` Andrew Jeffery 2021-11-02 22:21 ` Andrew Jeffery 2021-11-01 23:37 ` [PATCH -next 2/4] ipmi: bt: add clock control logic jae.hyun.yoo 2021-11-01 23:37 ` jae.hyun.yoo 2021-11-01 23:32 ` Joel Stanley 2021-11-01 23:32 ` Joel Stanley 2021-11-02 9:35 ` Cédric Le Goater 2021-11-02 9:35 ` Cédric Le Goater 2021-11-02 16:36 ` Jae Hyun Yoo 2021-11-02 16:36 ` Jae Hyun Yoo 2021-11-02 22:14 ` Andrew Jeffery 2021-11-02 22:14 ` Andrew Jeffery 2021-11-01 23:37 ` [PATCH -next 3/4] ARM: dts: aspeed: add LCLK setting into LPC KCS nodes jae.hyun.yoo 2021-11-01 23:37 ` jae.hyun.yoo 2021-11-01 23:34 ` Joel Stanley 2021-11-01 23:34 ` Joel Stanley 2021-11-02 22:22 ` Andrew Jeffery 2021-11-02 22:22 ` Andrew Jeffery 2021-11-03 16:15 ` Jae Hyun Yoo 2021-11-03 16:15 ` Jae Hyun Yoo 2021-11-01 23:37 ` [PATCH -next 4/4] ipmi: kcs_bmc_aspeed: add clock control logic jae.hyun.yoo 2021-11-01 23:37 ` jae.hyun.yoo 2021-11-01 23:33 ` Joel Stanley 2021-11-01 23:33 ` Joel Stanley 2021-11-02 3:15 ` ChiaWei Wang 2021-11-02 3:15 ` ChiaWei Wang 2021-11-02 3:28 ` Joel Stanley 2021-11-02 3:28 ` Joel Stanley 2021-11-02 16:35 ` Jae Hyun Yoo 2021-11-02 16:35 ` Jae Hyun Yoo 2021-11-03 1:55 ` ChiaWei Wang 2021-11-03 1:55 ` ChiaWei Wang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211101233751.49222-1-jae.hyun.yoo@intel.com \ --to=jae.hyun.yoo@intel.com \ --cc=andrew@aj.id.au \ --cc=clg@kaod.org \ --cc=devicetree@vger.kernel.org \ --cc=haiyue.wang@linux.intel.com \ --cc=jae.hyun.yoo@linux.intel.com \ --cc=joel@jms.id.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-aspeed@lists.ozlabs.org \ --cc=minyard@acm.org \ --cc=openipmi-developer@lists.sourceforge.net \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.