* [PATCH v4 00/13] mtd: spi-nor: Clean params init
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
Clean spi_nor_scan() and the flash parameters initialization code.
Tested all the flashes from patch set. Reworked how the flags are
handled for the flash_info entries.
Changes in 4:
- new patch:
"mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls"
- move spi_nor_post_sfdp_fixups() in drivers/mtd/spi-nor/sfdp.c
- Reworked flash_info flags. nor->info->flags are split in new flash_info
members: parse_sfdp, flags, no_sfdp_flags, fixup_flags and mfr_flags.
- remove roll-back mechanism for flashes that use PARSE_SFDP.
- dropped R-b tags where the new version of the patch modified how things
are handled
Changes in v3:
- move late_init() in struct spi_nor_fixups and update patches accordingly.
R-b tags were dropped.
- new patch "mtd: spi-nor: sst: Get rid of SST_WRITE flash_info flag"
moves manufacturer specific flag out of the core.
- update methods description to make it clear who sets when
- introduce flash_info flag masks to make it clear when one should be set.
- rework "parse SFDP first idea".
- v4 changes log in each commit after ---
Tudor Ambarus (13):
mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of
calls
mtd: spi-nor: Introduce spi_nor_set_mtd_info()
mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is
defined
mtd: spi-nor: core: Introduce flash_info mfr_flags
mtd: spi-nor: Rework the flash_info flags
mtd: spi-nor: Introduce spi_nor_init_flags()
mtd: spi-nor: Introduce spi_nor_init_fixup_flags()
mtd: spi-nor: core: Init all flash parameters based on SFDP where
possible
mtd: spi-nor: core: Move spi_nor_set_addr_width() in spi_nor_setup()
mtd: spi-nor: winbond: w25q256jvm: Init flash based on SFDP
mtd: spi-nor: spansion: s25fl256s0: Skip SFDP parsing
mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP
mtd: spi-nor: issi: is25lp256: Init flash based on SFDP
drivers/mtd/spi-nor/atmel.c | 71 +++--
drivers/mtd/spi-nor/catalyst.c | 15 +-
drivers/mtd/spi-nor/core.c | 500 +++++++++++++++++--------------
drivers/mtd/spi-nor/core.h | 206 ++++++++-----
drivers/mtd/spi-nor/eon.c | 33 +-
drivers/mtd/spi-nor/esmt.c | 15 +-
drivers/mtd/spi-nor/everspin.c | 12 +-
drivers/mtd/spi-nor/fujitsu.c | 3 +-
drivers/mtd/spi-nor/gigadevice.c | 57 ++--
drivers/mtd/spi-nor/intel.c | 12 +-
drivers/mtd/spi-nor/issi.c | 60 ++--
drivers/mtd/spi-nor/macronix.c | 105 ++++---
drivers/mtd/spi-nor/micron-st.c | 211 +++++++------
drivers/mtd/spi-nor/otp.c | 2 +-
drivers/mtd/spi-nor/sfdp.c | 20 ++
drivers/mtd/spi-nor/spansion.c | 160 +++++-----
drivers/mtd/spi-nor/sst.c | 88 ++++--
drivers/mtd/spi-nor/swp.c | 2 +-
drivers/mtd/spi-nor/winbond.c | 161 +++++-----
drivers/mtd/spi-nor/xmc.c | 10 +-
20 files changed, 984 insertions(+), 759 deletions(-)
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 50+ messages in thread
* [PATCH v4 00/13] mtd: spi-nor: Clean params init
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
Clean spi_nor_scan() and the flash parameters initialization code.
Tested all the flashes from patch set. Reworked how the flags are
handled for the flash_info entries.
Changes in 4:
- new patch:
"mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls"
- move spi_nor_post_sfdp_fixups() in drivers/mtd/spi-nor/sfdp.c
- Reworked flash_info flags. nor->info->flags are split in new flash_info
members: parse_sfdp, flags, no_sfdp_flags, fixup_flags and mfr_flags.
- remove roll-back mechanism for flashes that use PARSE_SFDP.
- dropped R-b tags where the new version of the patch modified how things
are handled
Changes in v3:
- move late_init() in struct spi_nor_fixups and update patches accordingly.
R-b tags were dropped.
- new patch "mtd: spi-nor: sst: Get rid of SST_WRITE flash_info flag"
moves manufacturer specific flag out of the core.
- update methods description to make it clear who sets when
- introduce flash_info flag masks to make it clear when one should be set.
- rework "parse SFDP first idea".
- v4 changes log in each commit after ---
Tudor Ambarus (13):
mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of
calls
mtd: spi-nor: Introduce spi_nor_set_mtd_info()
mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is
defined
mtd: spi-nor: core: Introduce flash_info mfr_flags
mtd: spi-nor: Rework the flash_info flags
mtd: spi-nor: Introduce spi_nor_init_flags()
mtd: spi-nor: Introduce spi_nor_init_fixup_flags()
mtd: spi-nor: core: Init all flash parameters based on SFDP where
possible
mtd: spi-nor: core: Move spi_nor_set_addr_width() in spi_nor_setup()
mtd: spi-nor: winbond: w25q256jvm: Init flash based on SFDP
mtd: spi-nor: spansion: s25fl256s0: Skip SFDP parsing
mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP
mtd: spi-nor: issi: is25lp256: Init flash based on SFDP
drivers/mtd/spi-nor/atmel.c | 71 +++--
drivers/mtd/spi-nor/catalyst.c | 15 +-
drivers/mtd/spi-nor/core.c | 500 +++++++++++++++++--------------
drivers/mtd/spi-nor/core.h | 206 ++++++++-----
drivers/mtd/spi-nor/eon.c | 33 +-
drivers/mtd/spi-nor/esmt.c | 15 +-
drivers/mtd/spi-nor/everspin.c | 12 +-
drivers/mtd/spi-nor/fujitsu.c | 3 +-
drivers/mtd/spi-nor/gigadevice.c | 57 ++--
drivers/mtd/spi-nor/intel.c | 12 +-
drivers/mtd/spi-nor/issi.c | 60 ++--
drivers/mtd/spi-nor/macronix.c | 105 ++++---
drivers/mtd/spi-nor/micron-st.c | 211 +++++++------
drivers/mtd/spi-nor/otp.c | 2 +-
drivers/mtd/spi-nor/sfdp.c | 20 ++
drivers/mtd/spi-nor/spansion.c | 160 +++++-----
drivers/mtd/spi-nor/sst.c | 88 ++++--
drivers/mtd/spi-nor/swp.c | 2 +-
drivers/mtd/spi-nor/winbond.c | 161 +++++-----
drivers/mtd/spi-nor/xmc.c | 10 +-
20 files changed, 984 insertions(+), 759 deletions(-)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 50+ messages in thread
* [PATCH v4 01/13] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
Use NOR parameters in the probe's sequence of calls, thus
nor->params->size instead of nor->mtd.size and let the mtd_info
fields be used by the mtd calls (mtd->_erase, mtd->_read, mtd->_write).
mtd_info fields should not be used during probe because we haven't
registered mtd yet.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: new patch
drivers/mtd/spi-nor/core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 88dd0908d172..5b9c827d411c 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2115,7 +2115,7 @@ static int spi_nor_spimem_check_op(struct spi_nor *nor,
*/
op->addr.nbytes = 4;
if (!spi_mem_supports_op(nor->spimem, op)) {
- if (nor->mtd.size > SZ_16M)
+ if (nor->params->size > SZ_16M)
return -EOPNOTSUPP;
/* If flash size <= 16MB, 3 address bytes are sufficient */
@@ -3011,7 +3011,7 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
nor->addr_width = 3;
}
- if (nor->addr_width == 3 && nor->mtd.size > 0x1000000) {
+ if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
}
@@ -3245,7 +3245,7 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor)
SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
SPI_MEM_OP_DATA_IN(0, NULL, 0)),
.offset = 0,
- .length = nor->mtd.size,
+ .length = nor->params->size,
};
struct spi_mem_op *op = &info.op_tmpl;
@@ -3276,7 +3276,7 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor)
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(0, NULL, 0)),
.offset = 0,
- .length = nor->mtd.size,
+ .length = nor->params->size,
};
struct spi_mem_op *op = &info.op_tmpl;
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 01/13] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
Use NOR parameters in the probe's sequence of calls, thus
nor->params->size instead of nor->mtd.size and let the mtd_info
fields be used by the mtd calls (mtd->_erase, mtd->_read, mtd->_write).
mtd_info fields should not be used during probe because we haven't
registered mtd yet.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: new patch
drivers/mtd/spi-nor/core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 88dd0908d172..5b9c827d411c 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2115,7 +2115,7 @@ static int spi_nor_spimem_check_op(struct spi_nor *nor,
*/
op->addr.nbytes = 4;
if (!spi_mem_supports_op(nor->spimem, op)) {
- if (nor->mtd.size > SZ_16M)
+ if (nor->params->size > SZ_16M)
return -EOPNOTSUPP;
/* If flash size <= 16MB, 3 address bytes are sufficient */
@@ -3011,7 +3011,7 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
nor->addr_width = 3;
}
- if (nor->addr_width == 3 && nor->mtd.size > 0x1000000) {
+ if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
}
@@ -3245,7 +3245,7 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor)
SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
SPI_MEM_OP_DATA_IN(0, NULL, 0)),
.offset = 0,
- .length = nor->mtd.size,
+ .length = nor->params->size,
};
struct spi_mem_op *op = &info.op_tmpl;
@@ -3276,7 +3276,7 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor)
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(0, NULL, 0)),
.offset = 0,
- .length = nor->mtd.size,
+ .length = nor->params->size,
};
struct spi_mem_op *op = &info.op_tmpl;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 02/13] mtd: spi-nor: Introduce spi_nor_set_mtd_info()
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
Used to init all the mtd_info fields. Move the mtd_info init
the last thing in the spi_nor_scan(), so that we avoid superfluous
initialization of the mtd_info fields in case of errors.
While here use common naming scheme for functions that are setting
mtd_info fields:
s/spi_nor_register_locking_ops/spi_nor_set_mtd_locking_ops
s/spi_nor_otp_init/spi_nor_set_mtd_otp_ops
The functions names are self explanatory, get rid of the comment
for the OTP function.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
---
v4: no changes
drivers/mtd/spi-nor/core.c | 56 +++++++++++++++++++++-----------------
drivers/mtd/spi-nor/core.h | 4 +--
drivers/mtd/spi-nor/otp.c | 2 +-
drivers/mtd/spi-nor/swp.c | 2 +-
4 files changed, 35 insertions(+), 29 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 5b9c827d411c..c2da885f4d8d 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3080,6 +3080,35 @@ static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor,
return info;
}
+static void spi_nor_set_mtd_info(struct spi_nor *nor)
+{
+ struct mtd_info *mtd = &nor->mtd;
+ struct device *dev = nor->dev;
+
+ spi_nor_set_mtd_locking_ops(nor);
+ spi_nor_set_mtd_otp_ops(nor);
+
+ mtd->dev.parent = dev;
+ if (!mtd->name)
+ mtd->name = dev_name(dev);
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = MTD_CAP_NORFLASH;
+ if (nor->info->flags & SPI_NOR_NO_ERASE)
+ mtd->flags |= MTD_NO_ERASE;
+ mtd->writesize = nor->params->writesize;
+ mtd->writebufsize = nor->params->page_size;
+ mtd->size = nor->params->size;
+ mtd->_erase = spi_nor_erase;
+ mtd->_read = spi_nor_read;
+ /* Might be already set by some SST flashes. */
+ if (!mtd->_write)
+ mtd->_write = spi_nor_write;
+ mtd->_suspend = spi_nor_suspend;
+ mtd->_resume = spi_nor_resume;
+ mtd->_get_device = spi_nor_get_device;
+ mtd->_put_device = spi_nor_put_device;
+}
+
int spi_nor_scan(struct spi_nor *nor, const char *name,
const struct spi_nor_hwcaps *hwcaps)
{
@@ -3134,26 +3163,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (info->flags & SPI_NOR_HAS_LOCK)
nor->flags |= SNOR_F_HAS_LOCK;
- mtd->_write = spi_nor_write;
-
/* Init flash parameters based on flash_info struct and SFDP */
ret = spi_nor_init_params(nor);
if (ret)
return ret;
- if (!mtd->name)
- mtd->name = dev_name(dev);
- mtd->type = MTD_NORFLASH;
- mtd->writesize = nor->params->writesize;
- mtd->flags = MTD_CAP_NORFLASH;
- mtd->size = nor->params->size;
- mtd->_erase = spi_nor_erase;
- mtd->_read = spi_nor_read;
- mtd->_suspend = spi_nor_suspend;
- mtd->_resume = spi_nor_resume;
- mtd->_get_device = spi_nor_get_device;
- mtd->_put_device = spi_nor_put_device;
-
if (info->flags & USE_FSR)
nor->flags |= SNOR_F_USE_FSR;
if (info->flags & SPI_NOR_HAS_TB) {
@@ -3175,12 +3189,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
}
- if (info->flags & SPI_NOR_NO_ERASE)
- mtd->flags |= MTD_NO_ERASE;
-
- mtd->dev.parent = dev;
- mtd->writebufsize = nor->params->page_size;
-
if (of_property_read_bool(np, "broken-flash-reset"))
nor->flags |= SNOR_F_BROKEN_RESET;
@@ -3204,15 +3212,13 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (ret)
return ret;
- spi_nor_register_locking_ops(nor);
-
/* Send all the required SPI flash commands to initialize device */
ret = spi_nor_init(nor);
if (ret)
return ret;
- /* Configure OTP parameters and ops */
- spi_nor_otp_init(nor);
+ /* No mtd_info fields are used up to this point. */
+ spi_nor_set_mtd_info(nor);
dev_info(dev, "%s (%lld Kbytes)\n", info->name,
(long long)mtd->size >> 10);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 50bae06bc024..f6c4b6f4743b 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -552,8 +552,8 @@ int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
void spi_nor_init_default_locking_ops(struct spi_nor *nor);
void spi_nor_try_unlock_all(struct spi_nor *nor);
-void spi_nor_register_locking_ops(struct spi_nor *nor);
-void spi_nor_otp_init(struct spi_nor *nor);
+void spi_nor_set_mtd_locking_ops(struct spi_nor *nor);
+void spi_nor_set_mtd_otp_ops(struct spi_nor *nor);
static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
{
diff --git a/drivers/mtd/spi-nor/otp.c b/drivers/mtd/spi-nor/otp.c
index 983e40b19134..fa63d8571218 100644
--- a/drivers/mtd/spi-nor/otp.c
+++ b/drivers/mtd/spi-nor/otp.c
@@ -480,7 +480,7 @@ static int spi_nor_mtd_otp_lock(struct mtd_info *mtd, loff_t from, size_t len)
return ret;
}
-void spi_nor_otp_init(struct spi_nor *nor)
+void spi_nor_set_mtd_otp_ops(struct spi_nor *nor)
{
struct mtd_info *mtd = &nor->mtd;
diff --git a/drivers/mtd/spi-nor/swp.c b/drivers/mtd/spi-nor/swp.c
index 8594bcbb7dbe..1f178313ba8f 100644
--- a/drivers/mtd/spi-nor/swp.c
+++ b/drivers/mtd/spi-nor/swp.c
@@ -414,7 +414,7 @@ void spi_nor_try_unlock_all(struct spi_nor *nor)
dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
}
-void spi_nor_register_locking_ops(struct spi_nor *nor)
+void spi_nor_set_mtd_locking_ops(struct spi_nor *nor)
{
struct mtd_info *mtd = &nor->mtd;
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 02/13] mtd: spi-nor: Introduce spi_nor_set_mtd_info()
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
Used to init all the mtd_info fields. Move the mtd_info init
the last thing in the spi_nor_scan(), so that we avoid superfluous
initialization of the mtd_info fields in case of errors.
While here use common naming scheme for functions that are setting
mtd_info fields:
s/spi_nor_register_locking_ops/spi_nor_set_mtd_locking_ops
s/spi_nor_otp_init/spi_nor_set_mtd_otp_ops
The functions names are self explanatory, get rid of the comment
for the OTP function.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
---
v4: no changes
drivers/mtd/spi-nor/core.c | 56 +++++++++++++++++++++-----------------
drivers/mtd/spi-nor/core.h | 4 +--
drivers/mtd/spi-nor/otp.c | 2 +-
drivers/mtd/spi-nor/swp.c | 2 +-
4 files changed, 35 insertions(+), 29 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 5b9c827d411c..c2da885f4d8d 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3080,6 +3080,35 @@ static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor,
return info;
}
+static void spi_nor_set_mtd_info(struct spi_nor *nor)
+{
+ struct mtd_info *mtd = &nor->mtd;
+ struct device *dev = nor->dev;
+
+ spi_nor_set_mtd_locking_ops(nor);
+ spi_nor_set_mtd_otp_ops(nor);
+
+ mtd->dev.parent = dev;
+ if (!mtd->name)
+ mtd->name = dev_name(dev);
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = MTD_CAP_NORFLASH;
+ if (nor->info->flags & SPI_NOR_NO_ERASE)
+ mtd->flags |= MTD_NO_ERASE;
+ mtd->writesize = nor->params->writesize;
+ mtd->writebufsize = nor->params->page_size;
+ mtd->size = nor->params->size;
+ mtd->_erase = spi_nor_erase;
+ mtd->_read = spi_nor_read;
+ /* Might be already set by some SST flashes. */
+ if (!mtd->_write)
+ mtd->_write = spi_nor_write;
+ mtd->_suspend = spi_nor_suspend;
+ mtd->_resume = spi_nor_resume;
+ mtd->_get_device = spi_nor_get_device;
+ mtd->_put_device = spi_nor_put_device;
+}
+
int spi_nor_scan(struct spi_nor *nor, const char *name,
const struct spi_nor_hwcaps *hwcaps)
{
@@ -3134,26 +3163,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (info->flags & SPI_NOR_HAS_LOCK)
nor->flags |= SNOR_F_HAS_LOCK;
- mtd->_write = spi_nor_write;
-
/* Init flash parameters based on flash_info struct and SFDP */
ret = spi_nor_init_params(nor);
if (ret)
return ret;
- if (!mtd->name)
- mtd->name = dev_name(dev);
- mtd->type = MTD_NORFLASH;
- mtd->writesize = nor->params->writesize;
- mtd->flags = MTD_CAP_NORFLASH;
- mtd->size = nor->params->size;
- mtd->_erase = spi_nor_erase;
- mtd->_read = spi_nor_read;
- mtd->_suspend = spi_nor_suspend;
- mtd->_resume = spi_nor_resume;
- mtd->_get_device = spi_nor_get_device;
- mtd->_put_device = spi_nor_put_device;
-
if (info->flags & USE_FSR)
nor->flags |= SNOR_F_USE_FSR;
if (info->flags & SPI_NOR_HAS_TB) {
@@ -3175,12 +3189,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
}
- if (info->flags & SPI_NOR_NO_ERASE)
- mtd->flags |= MTD_NO_ERASE;
-
- mtd->dev.parent = dev;
- mtd->writebufsize = nor->params->page_size;
-
if (of_property_read_bool(np, "broken-flash-reset"))
nor->flags |= SNOR_F_BROKEN_RESET;
@@ -3204,15 +3212,13 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (ret)
return ret;
- spi_nor_register_locking_ops(nor);
-
/* Send all the required SPI flash commands to initialize device */
ret = spi_nor_init(nor);
if (ret)
return ret;
- /* Configure OTP parameters and ops */
- spi_nor_otp_init(nor);
+ /* No mtd_info fields are used up to this point. */
+ spi_nor_set_mtd_info(nor);
dev_info(dev, "%s (%lld Kbytes)\n", info->name,
(long long)mtd->size >> 10);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 50bae06bc024..f6c4b6f4743b 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -552,8 +552,8 @@ int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
void spi_nor_init_default_locking_ops(struct spi_nor *nor);
void spi_nor_try_unlock_all(struct spi_nor *nor);
-void spi_nor_register_locking_ops(struct spi_nor *nor);
-void spi_nor_otp_init(struct spi_nor *nor);
+void spi_nor_set_mtd_locking_ops(struct spi_nor *nor);
+void spi_nor_set_mtd_otp_ops(struct spi_nor *nor);
static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
{
diff --git a/drivers/mtd/spi-nor/otp.c b/drivers/mtd/spi-nor/otp.c
index 983e40b19134..fa63d8571218 100644
--- a/drivers/mtd/spi-nor/otp.c
+++ b/drivers/mtd/spi-nor/otp.c
@@ -480,7 +480,7 @@ static int spi_nor_mtd_otp_lock(struct mtd_info *mtd, loff_t from, size_t len)
return ret;
}
-void spi_nor_otp_init(struct spi_nor *nor)
+void spi_nor_set_mtd_otp_ops(struct spi_nor *nor)
{
struct mtd_info *mtd = &nor->mtd;
diff --git a/drivers/mtd/spi-nor/swp.c b/drivers/mtd/spi-nor/swp.c
index 8594bcbb7dbe..1f178313ba8f 100644
--- a/drivers/mtd/spi-nor/swp.c
+++ b/drivers/mtd/spi-nor/swp.c
@@ -414,7 +414,7 @@ void spi_nor_try_unlock_all(struct spi_nor *nor)
dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
}
-void spi_nor_register_locking_ops(struct spi_nor *nor)
+void spi_nor_set_mtd_locking_ops(struct spi_nor *nor)
{
struct mtd_info *mtd = &nor->mtd;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 03/13] mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is defined
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
spi_nor_post_sfdp_fixups() was called even when there were no SFDP
tables defined. late_init() should be instead used for flashes that
do not define SFDP tables.
Use spi_nor_post_sfdp_fixups() just to fix SFDP data. post_sfdp()
hook is as of now used just by s28hs512t, mt35xu512aba, and both
support SFDP, there's no functional change with this patch.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4:
- move spi_nor_post_sfdp_fixups in sfdp.c
- drop R-b tags
drivers/mtd/spi-nor/core.c | 33 ++++-----------------------------
drivers/mtd/spi-nor/sfdp.c | 20 ++++++++++++++++++++
2 files changed, 24 insertions(+), 29 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index c2da885f4d8d..644f3b7976c9 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2642,26 +2642,6 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
}
-/**
- * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
- * after SFDP has been parsed (is also called for SPI NORs that do not
- * support RDSFDP).
- * @nor: pointer to a 'struct spi_nor'
- *
- * Typically used to tweak various parameters that could not be extracted by
- * other means (i.e. when information provided by the SFDP/flash_info tables
- * are incomplete or wrong).
- */
-static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
-{
- if (nor->manufacturer && nor->manufacturer->fixups &&
- nor->manufacturer->fixups->post_sfdp)
- nor->manufacturer->fixups->post_sfdp(nor);
-
- if (nor->info->fixups && nor->info->fixups->post_sfdp)
- nor->info->fixups->post_sfdp(nor);
-}
-
/**
* spi_nor_late_init_params() - Late initialization of default flash parameters.
* @nor: pointer to a 'struct spi_nor'
@@ -2712,15 +2692,12 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
* Please note that there is a ->post_bfpt() fixup hook that can overwrite
* the flash parameters and settings immediately after parsing the Basic
* Flash Parameter Table.
+ * spi_nor_post_sfdp_fixups() is called after the SFDP tables are parsed.
+ * It is used to tweak various flash parameters when information provided
+ * by the SFDP tables are wrong.
*
* which can be overwritten by:
- * 4/ Post SFDP flash parameters initialization. Used to tweak various
- * parameters that could not be extracted by other means (i.e. when
- * information provided by the SFDP/flash_info tables are incomplete or
- * wrong).
- * spi_nor_post_sfdp_fixups()
- *
- * 5/ Late flash parameters initialization, used to initialize flash
+ * 4/ Late flash parameters initialization, used to initialize flash
* parameters that are not declared in the JESD216 SFDP standard, or where SFDP
* tables are not defined at all.
* spi_nor_late_init_params()
@@ -2740,8 +2717,6 @@ static int spi_nor_init_params(struct spi_nor *nor)
!(nor->info->flags & SPI_NOR_SKIP_SFDP))
spi_nor_sfdp_init_params(nor);
- spi_nor_post_sfdp_fixups(nor);
-
spi_nor_late_init_params(nor);
return 0;
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index c500c2118a5d..a5211543d30d 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -1228,6 +1228,25 @@ static int spi_nor_parse_sccr(struct spi_nor *nor,
return ret;
}
+/**
+ * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
+ * after SFDP has been parsed. Called only for flashes that define JESD216 SFDP
+ * tables.
+ * @nor: pointer to a 'struct spi_nor'
+ *
+ * Used to tweak various flash parameters when information provided by the SFDP
+ * tables are wrong.
+ */
+static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
+{
+ if (nor->manufacturer && nor->manufacturer->fixups &&
+ nor->manufacturer->fixups->post_sfdp)
+ nor->manufacturer->fixups->post_sfdp(nor);
+
+ if (nor->info->fixups && nor->info->fixups->post_sfdp)
+ nor->info->fixups->post_sfdp(nor);
+}
+
/**
* spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
* @nor: pointer to a 'struct spi_nor'
@@ -1408,6 +1427,7 @@ int spi_nor_parse_sfdp(struct spi_nor *nor)
}
}
+ spi_nor_post_sfdp_fixups(nor);
exit:
kfree(param_headers);
return err;
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 03/13] mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is defined
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
spi_nor_post_sfdp_fixups() was called even when there were no SFDP
tables defined. late_init() should be instead used for flashes that
do not define SFDP tables.
Use spi_nor_post_sfdp_fixups() just to fix SFDP data. post_sfdp()
hook is as of now used just by s28hs512t, mt35xu512aba, and both
support SFDP, there's no functional change with this patch.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4:
- move spi_nor_post_sfdp_fixups in sfdp.c
- drop R-b tags
drivers/mtd/spi-nor/core.c | 33 ++++-----------------------------
drivers/mtd/spi-nor/sfdp.c | 20 ++++++++++++++++++++
2 files changed, 24 insertions(+), 29 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index c2da885f4d8d..644f3b7976c9 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2642,26 +2642,6 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
}
-/**
- * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
- * after SFDP has been parsed (is also called for SPI NORs that do not
- * support RDSFDP).
- * @nor: pointer to a 'struct spi_nor'
- *
- * Typically used to tweak various parameters that could not be extracted by
- * other means (i.e. when information provided by the SFDP/flash_info tables
- * are incomplete or wrong).
- */
-static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
-{
- if (nor->manufacturer && nor->manufacturer->fixups &&
- nor->manufacturer->fixups->post_sfdp)
- nor->manufacturer->fixups->post_sfdp(nor);
-
- if (nor->info->fixups && nor->info->fixups->post_sfdp)
- nor->info->fixups->post_sfdp(nor);
-}
-
/**
* spi_nor_late_init_params() - Late initialization of default flash parameters.
* @nor: pointer to a 'struct spi_nor'
@@ -2712,15 +2692,12 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
* Please note that there is a ->post_bfpt() fixup hook that can overwrite
* the flash parameters and settings immediately after parsing the Basic
* Flash Parameter Table.
+ * spi_nor_post_sfdp_fixups() is called after the SFDP tables are parsed.
+ * It is used to tweak various flash parameters when information provided
+ * by the SFDP tables are wrong.
*
* which can be overwritten by:
- * 4/ Post SFDP flash parameters initialization. Used to tweak various
- * parameters that could not be extracted by other means (i.e. when
- * information provided by the SFDP/flash_info tables are incomplete or
- * wrong).
- * spi_nor_post_sfdp_fixups()
- *
- * 5/ Late flash parameters initialization, used to initialize flash
+ * 4/ Late flash parameters initialization, used to initialize flash
* parameters that are not declared in the JESD216 SFDP standard, or where SFDP
* tables are not defined at all.
* spi_nor_late_init_params()
@@ -2740,8 +2717,6 @@ static int spi_nor_init_params(struct spi_nor *nor)
!(nor->info->flags & SPI_NOR_SKIP_SFDP))
spi_nor_sfdp_init_params(nor);
- spi_nor_post_sfdp_fixups(nor);
-
spi_nor_late_init_params(nor);
return 0;
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index c500c2118a5d..a5211543d30d 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -1228,6 +1228,25 @@ static int spi_nor_parse_sccr(struct spi_nor *nor,
return ret;
}
+/**
+ * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
+ * after SFDP has been parsed. Called only for flashes that define JESD216 SFDP
+ * tables.
+ * @nor: pointer to a 'struct spi_nor'
+ *
+ * Used to tweak various flash parameters when information provided by the SFDP
+ * tables are wrong.
+ */
+static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
+{
+ if (nor->manufacturer && nor->manufacturer->fixups &&
+ nor->manufacturer->fixups->post_sfdp)
+ nor->manufacturer->fixups->post_sfdp(nor);
+
+ if (nor->info->fixups && nor->info->fixups->post_sfdp)
+ nor->info->fixups->post_sfdp(nor);
+}
+
/**
* spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
* @nor: pointer to a 'struct spi_nor'
@@ -1408,6 +1427,7 @@ int spi_nor_parse_sfdp(struct spi_nor *nor)
}
}
+ spi_nor_post_sfdp_fixups(nor);
exit:
kfree(param_headers);
return err;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 04/13] mtd: spi-nor: core: Introduce flash_info mfr_flags
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
Used in the manufacturer fixup hooks to differentiate support
between flashes of the same manufacturer. Not used in the
SPI NOR core.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: new patch
drivers/mtd/spi-nor/core.h | 10 +++++++++-
drivers/mtd/spi-nor/sst.c | 41 ++++++++++++++++++++++++++++----------
2 files changed, 40 insertions(+), 11 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index f6c4b6f4743b..a9fd956eed4e 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -336,7 +336,6 @@ struct flash_info {
u32 flags;
#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */
#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */
-#define SST_WRITE BIT(2) /* use SST byte programming */
#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */
#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */
#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */
@@ -385,6 +384,12 @@ struct flash_info {
* protection bits. Usually these will
* power-up in a write-protected state.
*/
+ u8 mfr_flags; /*
+ * Manufacturer private flags. Used in
+ * the manufacturer fixup hooks to
+ * differentiate support between flashes
+ * of the same manufacturer.
+ */
const struct spi_nor_otp_organization otp_org;
@@ -450,6 +455,9 @@ struct flash_info {
.n_regions = (_n_regions), \
},
+#define MFR_FLAGS(_mfr_flags) \
+ .mfr_flags = (_mfr_flags), \
+
/**
* struct spi_nor_manufacturer - SPI NOR manufacturer object
* @name: manufacturer name
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 3593aae0920f..8f1ebb8fd05f 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -8,6 +8,9 @@
#include "core.h"
+/* SST flash_info mfr_flag. Used to specify SST byte programming. */
+#define SST_WRITE BIT(0)
+
#define SST26VF_CR_BPNV BIT(3)
static int sst26vf_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
@@ -58,28 +61,46 @@ static const struct spi_nor_fixups sst26vf_fixups = {
static const struct flash_info sst_parts[] = {
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128,
SECT_4K | SPI_NOR_4BIT_BP | SPI_NOR_HAS_LOCK |
SPI_NOR_SWP_IS_VOLATILE) },
{ "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4, SECT_4K | SPI_NOR_HAS_LOCK) },
{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_HAS_LOCK) },
{ "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32,
SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
@@ -179,7 +200,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
static void sst_late_init(struct spi_nor *nor)
{
- if (nor->info->flags & SST_WRITE)
+ if (nor->info->mfr_flags & SST_WRITE)
nor->mtd._write = sst_write;
}
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 04/13] mtd: spi-nor: core: Introduce flash_info mfr_flags
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
Used in the manufacturer fixup hooks to differentiate support
between flashes of the same manufacturer. Not used in the
SPI NOR core.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: new patch
drivers/mtd/spi-nor/core.h | 10 +++++++++-
drivers/mtd/spi-nor/sst.c | 41 ++++++++++++++++++++++++++++----------
2 files changed, 40 insertions(+), 11 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index f6c4b6f4743b..a9fd956eed4e 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -336,7 +336,6 @@ struct flash_info {
u32 flags;
#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */
#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */
-#define SST_WRITE BIT(2) /* use SST byte programming */
#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */
#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */
#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */
@@ -385,6 +384,12 @@ struct flash_info {
* protection bits. Usually these will
* power-up in a write-protected state.
*/
+ u8 mfr_flags; /*
+ * Manufacturer private flags. Used in
+ * the manufacturer fixup hooks to
+ * differentiate support between flashes
+ * of the same manufacturer.
+ */
const struct spi_nor_otp_organization otp_org;
@@ -450,6 +455,9 @@ struct flash_info {
.n_regions = (_n_regions), \
},
+#define MFR_FLAGS(_mfr_flags) \
+ .mfr_flags = (_mfr_flags), \
+
/**
* struct spi_nor_manufacturer - SPI NOR manufacturer object
* @name: manufacturer name
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 3593aae0920f..8f1ebb8fd05f 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -8,6 +8,9 @@
#include "core.h"
+/* SST flash_info mfr_flag. Used to specify SST byte programming. */
+#define SST_WRITE BIT(0)
+
#define SST26VF_CR_BPNV BIT(3)
static int sst26vf_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
@@ -58,28 +61,46 @@ static const struct spi_nor_fixups sst26vf_fixups = {
static const struct flash_info sst_parts[] = {
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128,
SECT_4K | SPI_NOR_4BIT_BP | SPI_NOR_HAS_LOCK |
SPI_NOR_SWP_IS_VOLATILE) },
{ "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4, SECT_4K | SPI_NOR_HAS_LOCK) },
{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_HAS_LOCK) },
{ "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16,
- SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ SECT_4K | SPI_NOR_HAS_LOCK |
+ SPI_NOR_SWP_IS_VOLATILE)
+ MFR_FLAGS(SST_WRITE) },
{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32,
SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
@@ -179,7 +200,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
static void sst_late_init(struct spi_nor *nor)
{
- if (nor->info->flags & SST_WRITE)
+ if (nor->info->mfr_flags & SST_WRITE)
nor->mtd._write = sst_write;
}
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 05/13] mtd: spi-nor: Rework the flash_info flags
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
Clarify for what the flash_info flags are used for. Split them in
four categories and a bool:
1/ FLAGS: flags that indicate support that is not defined by the JESD216
standard in its SFDP tables.
2/ NO_SFDP_FLAGS: these flags are used when the flash does not define the
SFDP tables. These flags indicate support that can be discovered via
SFDP. Used together with SPI_NOR_SKIP_SFDP flag.
3/ FIXUP_FLAGS: flags that indicate support that can be discovered
via SFDP ideally, but can not be discovered for this particular flash
because the SFDP table that indicates this support is not defined by
the flash. In case the table for this support is defined but has wrong
values, one should instead use a post_sfdp() hook to set the SNOR_F
equivalent flag.
4/ MFR_FLAGS: manufacturer private flags. Used in the manufacturer
fixup hooks to differentiate support between flashes of the same
manufacturer.
5/ PARSE_SFDP: sets info->parse_sfdp to true. All flash_info entries
that support SFDP should be converted to set info->parse_sfdp to true.
SPI NOR flashes that statically declare one of the
SPI_NOR_{DUAL, QUAD, OCTAL, OCTAL_DTR}_READ flags and do not support
the RDSFDP command are gratuiously receiving the RDSFDP command
in the attempt of parsing the SFDP tables. It is not desirable to issue
commands that are not supported, so introduce PARSE_SFDP to help on this
situation.
New flash additions/updates should be declared/updated to use either
PARSE_SFDP or SPI_NOR_SKIP_SFDP. Once all the flash_info entries are
converted to use SPI_NOR_SKIP_SFDP or PARSE_SFDP, we can get rid of the
SPI_NOR_SKIP_SFDP flag and use just the bool nor->info->parse_sfdp to
determine whether to parse SFDP or not. SPI_NOR_SKIP_SFDP flag is kept
just as a way to differentiate whether a flash is converted to the new
flags logic or not.
Support that can be discovered when parsing SFDP should not be duplicated
by explicit flags at flash declaration. All the flash parameters will be
discovered when parsing SFDP. Sometimes manufacturers wrongly define some
fields in the SFDP tables. If that's the case, SFDP data can be amended
with the fixups() hooks. It is not common, but if the SFDP tables are
entirely wrong, and it does not worth the hassle to tweak the SFDP
parameters by using the fixups hooks, or if the flash does not define the
SFDP tables at all, then statically init the flash with the
SPI_NOR_SKIP_SFDP flag and specify the rest of flash capabilities with
the flash info flags.
With time, we want to convert all flashes to use PARSE_SFDP and
stop triggering the SFDP parsing with the
SPI_NOR_{DUAL, QUAD, OCTAL*}_READ flags. Getting rid of the
SPI_NOR_{OCTAL, OCTAL_DTR}_READ trigger is easily achievable,
the rest are a long term goal.
Manufacturer specific flags like USE_CLSR, USE_FSR, SPI_NOR_XSR_RDY,
will be removed in a future series.
No functional changes intended in this patch.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: new patch, complete rework
drivers/mtd/spi-nor/atmel.c | 71 ++++++-----
drivers/mtd/spi-nor/catalyst.c | 15 +--
drivers/mtd/spi-nor/core.c | 52 ++++----
drivers/mtd/spi-nor/core.h | 204 ++++++++++++++++++------------
drivers/mtd/spi-nor/eon.c | 33 ++---
drivers/mtd/spi-nor/esmt.c | 15 ++-
drivers/mtd/spi-nor/everspin.c | 12 +-
drivers/mtd/spi-nor/fujitsu.c | 3 +-
drivers/mtd/spi-nor/gigadevice.c | 58 +++++----
drivers/mtd/spi-nor/intel.c | 12 +-
drivers/mtd/spi-nor/issi.c | 60 +++++----
drivers/mtd/spi-nor/macronix.c | 105 ++++++++-------
drivers/mtd/spi-nor/micron-st.c | 211 ++++++++++++++++---------------
drivers/mtd/spi-nor/spansion.c | 159 ++++++++++++-----------
drivers/mtd/spi-nor/sst.c | 83 ++++++------
drivers/mtd/spi-nor/winbond.c | 162 ++++++++++++++----------
drivers/mtd/spi-nor/xmc.c | 10 +-
17 files changed, 698 insertions(+), 567 deletions(-)
diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
index d0e7883b38e3..d6d889ce8876 100644
--- a/drivers/mtd/spi-nor/atmel.c
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -157,39 +157,48 @@ static const struct spi_nor_fixups atmel_global_protection_fixups = {
static const struct flash_info atmel_parts[] = {
/* Atmel -- some are (confusingly) marketed as "DataFlash" */
- { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K | SPI_NOR_HAS_LOCK)
+ { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4)
+ FLAGS(SPI_NOR_HAS_LOCK)
+ NO_SFDP_FLAGS(SECT_4K)
.fixups = &atmel_at25fs_fixups },
- { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_HAS_LOCK)
+ { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8)
+ FLAGS(SPI_NOR_HAS_LOCK)
+ NO_SFDP_FLAGS(SECT_4K)
.fixups = &atmel_at25fs_fixups },
-
- { "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
- { "at25df321", INFO(0x1f4700, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
- { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
- { "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
-
- { "at25sl321", INFO(0x1f4216, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-
- { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) },
- { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
- { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
- { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
-
- { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
+ { "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at25df321", INFO(0x1f4700, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at25sl321", INFO(0x1f4216, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K) },
};
const struct spi_nor_manufacturer spi_nor_atmel = {
diff --git a/drivers/mtd/spi-nor/catalyst.c b/drivers/mtd/spi-nor/catalyst.c
index 011b83e99e95..ae4d67e01bb3 100644
--- a/drivers/mtd/spi-nor/catalyst.c
+++ b/drivers/mtd/spi-nor/catalyst.c
@@ -10,16 +10,11 @@
static const struct flash_info catalyst_parts[] = {
/* Catalyst / On Semiconductor -- non-JEDEC */
- { "cat25c11", CAT25_INFO(16, 8, 16, 1,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "cat25c03", CAT25_INFO(32, 8, 16, 2,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "cat25c09", CAT25_INFO(128, 8, 32, 2,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "cat25c17", CAT25_INFO(256, 8, 32, 2,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "cat25128", CAT25_INFO(2048, 8, 64, 2,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ { "cat25c11", CAT25_INFO(16, 8, 16, 1) },
+ { "cat25c03", CAT25_INFO(32, 8, 16, 2) },
+ { "cat25c09", CAT25_INFO(128, 8, 32, 2) },
+ { "cat25c17", CAT25_INFO(256, 8, 32, 2) },
+ { "cat25128", CAT25_INFO(2048, 8, 64, 2) },
};
const struct spi_nor_manufacturer spi_nor_catalyst = {
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 644f3b7976c9..a2d09b722fed 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2540,6 +2540,7 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
struct spi_nor_erase_map *map = ¶ms->erase_map;
const struct flash_info *info = nor->info;
struct device_node *np = spi_nor_get_flash_node(nor);
+ const u8 no_sfdp_flags = info->no_sfdp_flags;
u8 i, erase_mask;
/* Initialize default flash parameters and settings. */
@@ -2576,28 +2577,28 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
0, 8, SPINOR_OP_READ_FAST,
SNOR_PROTO_1_1_1);
- if (info->flags & SPI_NOR_DUAL_READ) {
+ if (no_sfdp_flags & SPI_NOR_DUAL_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2],
0, 8, SPINOR_OP_READ_1_1_2,
SNOR_PROTO_1_1_2);
}
- if (info->flags & SPI_NOR_QUAD_READ) {
+ if (no_sfdp_flags & SPI_NOR_QUAD_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_4],
0, 8, SPINOR_OP_READ_1_1_4,
SNOR_PROTO_1_1_4);
}
- if (info->flags & SPI_NOR_OCTAL_READ) {
+ if (no_sfdp_flags & SPI_NOR_OCTAL_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_8],
0, 8, SPINOR_OP_READ_1_1_8,
SNOR_PROTO_1_1_8);
}
- if (info->flags & SPI_NOR_OCTAL_DTR_READ) {
+ if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR;
spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_8_8_8_DTR],
0, 20, SPINOR_OP_READ_FAST,
@@ -2609,7 +2610,7 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP],
SPINOR_OP_PP, SNOR_PROTO_1_1_1);
- if (info->flags & SPI_NOR_OCTAL_DTR_PP) {
+ if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_PP) {
params->hwcaps.mask |= SNOR_HWCAPS_PP_8_8_8_DTR;
/*
* Since xSPI Page Program opcode is backward compatible with
@@ -2625,12 +2626,12 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
*/
erase_mask = 0;
i = 0;
- if (info->flags & SECT_4K_PMC) {
+ if (no_sfdp_flags & SECT_4K_PMC) {
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], 4096u,
SPINOR_OP_BE_4K_PMC);
i++;
- } else if (info->flags & SECT_4K) {
+ } else if (no_sfdp_flags & SECT_4K) {
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], 4096u,
SPINOR_OP_BE_4K);
@@ -2712,9 +2713,12 @@ static int spi_nor_init_params(struct spi_nor *nor)
spi_nor_manufacturer_init_params(nor);
- if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_OCTAL_READ | SPI_NOR_OCTAL_DTR_READ)) &&
- !(nor->info->flags & SPI_NOR_SKIP_SFDP))
+ if ((nor->info->parse_sfdp ||
+ (nor->info->no_sfdp_flags & (SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ |
+ SPI_NOR_OCTAL_READ |
+ SPI_NOR_OCTAL_DTR_READ))) &&
+ !(nor->info->no_sfdp_flags & SPI_NOR_SKIP_SFDP))
spi_nor_sfdp_init_params(nor);
spi_nor_late_init_params(nor);
@@ -3093,6 +3097,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
struct device_node *np = spi_nor_get_flash_node(nor);
int ret;
int i;
+ u16 flags;
+ u8 fixup_flags;
ret = spi_nor_check(nor);
if (ret)
@@ -3122,6 +3128,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
return PTR_ERR(info);
nor->info = info;
+ flags = info->flags;
spi_nor_debugfs_init(nor, info);
@@ -3132,10 +3139,10 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
* spi_nor_wait_till_ready(). Xilinx S3AN share MFR
* with Atmel SPI NOR.
*/
- if (info->flags & SPI_NOR_XSR_RDY)
+ if (flags & SPI_NOR_XSR_RDY)
nor->flags |= SNOR_F_READY_XSR_RDY;
- if (info->flags & SPI_NOR_HAS_LOCK)
+ if (flags & SPI_NOR_HAS_LOCK)
nor->flags |= SNOR_F_HAS_LOCK;
/* Init flash parameters based on flash_info struct and SFDP */
@@ -3143,24 +3150,24 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (ret)
return ret;
- if (info->flags & USE_FSR)
+ if (flags & USE_FSR)
nor->flags |= SNOR_F_USE_FSR;
- if (info->flags & SPI_NOR_HAS_TB) {
+ if (flags & SPI_NOR_HAS_TB) {
nor->flags |= SNOR_F_HAS_SR_TB;
- if (info->flags & SPI_NOR_TB_SR_BIT6)
+ if (flags & SPI_NOR_TB_SR_BIT6)
nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
}
- if (info->flags & NO_CHIP_ERASE)
+ if (flags & NO_CHIP_ERASE)
nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
- if (info->flags & USE_CLSR)
+ if (flags & USE_CLSR)
nor->flags |= SNOR_F_USE_CLSR;
- if (info->flags & SPI_NOR_SWP_IS_VOLATILE)
+ if (flags & SPI_NOR_SWP_IS_VOLATILE)
nor->flags |= SNOR_F_SWP_IS_VOLATILE;
- if (info->flags & SPI_NOR_4BIT_BP) {
+ if (flags & SPI_NOR_4BIT_BP) {
nor->flags |= SNOR_F_HAS_4BIT_BP;
- if (info->flags & SPI_NOR_BP3_SR_BIT6)
+ if (flags & SPI_NOR_BP3_SR_BIT6)
nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
}
@@ -3177,10 +3184,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (ret)
return ret;
- if (info->flags & SPI_NOR_4B_OPCODES)
+ fixup_flags = info->fixup_flags;
+ if (fixup_flags & SPI_NOR_4B_OPCODES)
nor->flags |= SNOR_F_4B_OPCODES;
- if (info->flags & SPI_NOR_IO_MODE_EN_VOLATILE)
+ if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
ret = spi_nor_set_addr_width(nor);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index a9fd956eed4e..2afb610853a9 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -313,92 +313,118 @@ struct spi_nor_fixups {
void (*late_init)(struct spi_nor *nor);
};
+/**
+ * struct flash_info - SPI NOR flash_info entry.
+ * @name: the name of the flash.
+ * @id: the flash's ID bytes. The first three bytes are the
+ * JEDIC ID. JEDEC ID zero means "no ID" (mostly older chips).
+ * @id_len: the number of bytes of ID.
+ * @sector_size: the size listed here is what works with SPINOR_OP_SE, which
+ * isn't necessarily called a "sector" by the vendor.
+ * @n_sectors: the number of sectors.
+ * @page_size: the flash's page size.
+ * @addr_width: the flash's address width.
+ *
+ * @parse_sfdp: true when flash supports SFDP tables. The false value has no
+ * meaning. If one wants to skip the SFDP tables, one should
+ * instead use the SPI_NOR_SKIP_SFDP sfdp_flag.
+ * @flags: flags that indicate support that is not defined by the
+ * JESD216 standard in its SFDP tables. Flag meanings:
+ * SPI_NOR_HAS_LOCK: flash supports lock/unlock via SR
+ * SPI_NOR_HAS_TB: flash SR has Top/Bottom (TB) protect bit. Must be
+ * used with SPI_NOR_HAS_LOCK.
+ * SPI_NOR_TB_SR_BIT6: Top/Bottom (TB) is bit 6 of status register.
+ * Must be used with SPI_NOR_HAS_TB.
+ * SPI_NOR_4BIT_BP: flash SR has 4 bit fields (BP0-3) for block
+ * protection.
+ * SPI_NOR_BP3_SR_BIT6: BP3 is bit 6 of status register. Must be used with
+ * SPI_NOR_4BIT_BP.
+ * SPI_NOR_SWP_IS_VOLATILE: flash has volatile software write protection bits.
+ * Usually these will power-up in a write-protected
+ * state.
+ * SPI_NOR_NO_ERASE: no erase command needed.
+ * NO_CHIP_ERASE: chip does not support chip erase.
+ * SPI_NOR_NO_FR: can't do fastread.
+ * USE_CLSR: use CLSR command.
+ * USE_FSR: use flag status register
+ * SPI_NOR_XSR_RDY: S3AN flashes have specific opcode to read the
+ * status register.
+ *
+ * @no_sfdp_flags: flags that indicate support that can be discovered via SFDP.
+ * Used when SFDP tables are not defined in the flash. These
+ * flags are used together with the SPI_NOR_SKIP_SFDP flag.
+ * SPI_NOR_SKIP_SFDP: skip parsing of SFDP tables.
+ * SECT_4K: SPINOR_OP_BE_4K works uniformly.
+ * SECT_4K_PMC: SPINOR_OP_BE_4K_PMC works uniformly.
+ * SPI_NOR_DUAL_READ: flash supports Dual Read.
+ * SPI_NOR_QUAD_READ: flash supports Quad Read.
+ * SPI_NOR_OCTAL_READ: flash supports Octal Read.
+ * SPI_NOR_OCTAL_DTR_READ: flash supports octal DTR Read.
+ * SPI_NOR_OCTAL_DTR_PP: flash supports Octal DTR Page Program.
+ *
+ * @fixup_flags: flags that indicate support that can be discovered via SFDP
+ * ideally, but can not be discovered for this particular flash
+ * because the SFDP table that indicates this support is not
+ * defined by the flash. In case the table for this support is
+ * defined but has wrong values, one should instead use a
+ * post_sfdp() hook to set the SNOR_F equivalent flag.
+ *
+ * SPI_NOR_4B_OPCODES: use dedicated 4byte address op codes to support
+ * memory size above 128Mib.
+ * SPI_NOR_IO_MODE_EN_VOLATILE: flash enables the best available I/O mode
+ * via a volatile bit.
+ * @mfr_flags: manufacturer private flags. Used in the manufacturer fixup
+ * hooks to differentiate support between flashes of the same
+ * manufacturer.
+ * @otp_org: flash's OTP organization.
+ * @fixups: part specific fixup hooks.
+ */
struct flash_info {
- char *name;
-
- /*
- * This array stores the ID bytes.
- * The first three bytes are the JEDIC ID.
- * JEDEC ID zero means "no ID" (mostly older chips).
- */
- u8 id[SPI_NOR_MAX_ID_LEN];
- u8 id_len;
-
- /* The size listed here is what works with SPINOR_OP_SE, which isn't
- * necessarily called a "sector" by the vendor.
- */
- unsigned sector_size;
- u16 n_sectors;
-
- u16 page_size;
- u16 addr_width;
-
- u32 flags;
-#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */
-#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */
-#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */
-#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */
-#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */
-#define SPI_NOR_QUAD_READ BIT(6) /* Flash supports Quad Read */
-#define USE_FSR BIT(7) /* use flag status register */
-#define SPI_NOR_HAS_LOCK BIT(8) /* Flash supports lock/unlock via SR */
-#define SPI_NOR_HAS_TB BIT(9) /*
- * Flash SR has Top/Bottom (TB) protect
- * bit. Must be used with
- * SPI_NOR_HAS_LOCK.
- */
-#define SPI_NOR_XSR_RDY BIT(10) /*
- * S3AN flashes have specific opcode to
- * read the status register.
- */
-#define SPI_NOR_4B_OPCODES BIT(11) /*
- * Use dedicated 4byte address op codes
- * to support memory size above 128Mib.
- */
-#define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */
-#define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */
-#define USE_CLSR BIT(14) /* use CLSR command */
-#define SPI_NOR_OCTAL_READ BIT(15) /* Flash supports Octal Read */
-#define SPI_NOR_TB_SR_BIT6 BIT(16) /*
- * Top/Bottom (TB) is bit 6 of
- * status register. Must be used with
- * SPI_NOR_HAS_TB.
- */
-#define SPI_NOR_4BIT_BP BIT(17) /*
- * Flash SR has 4 bit fields (BP0-3)
- * for block protection.
- */
-#define SPI_NOR_BP3_SR_BIT6 BIT(18) /*
- * BP3 is bit 6 of status register.
- * Must be used with SPI_NOR_4BIT_BP.
- */
-#define SPI_NOR_OCTAL_DTR_READ BIT(19) /* Flash supports octal DTR Read. */
-#define SPI_NOR_OCTAL_DTR_PP BIT(20) /* Flash supports Octal DTR Page Program */
-#define SPI_NOR_IO_MODE_EN_VOLATILE BIT(21) /*
- * Flash enables the best
- * available I/O mode via a
- * volatile bit.
- */
-#define SPI_NOR_SWP_IS_VOLATILE BIT(22) /*
- * Flash has volatile software write
- * protection bits. Usually these will
- * power-up in a write-protected state.
- */
- u8 mfr_flags; /*
- * Manufacturer private flags. Used in
- * the manufacturer fixup hooks to
- * differentiate support between flashes
- * of the same manufacturer.
- */
+ char *name;
+ u8 id[SPI_NOR_MAX_ID_LEN];
+ u8 id_len;
+ unsigned sector_size;
+ u16 n_sectors;
+ u16 page_size;
+ u16 addr_width;
+
+ bool parse_sfdp;
+ u16 flags;
+#define SPI_NOR_HAS_LOCK BIT(0)
+#define SPI_NOR_HAS_TB BIT(1)
+#define SPI_NOR_TB_SR_BIT6 BIT(2)
+#define SPI_NOR_4BIT_BP BIT(3)
+#define SPI_NOR_BP3_SR_BIT6 BIT(4)
+#define SPI_NOR_SWP_IS_VOLATILE BIT(5)
+#define SPI_NOR_NO_ERASE BIT(6)
+#define NO_CHIP_ERASE BIT(7)
+#define SPI_NOR_NO_FR BIT(8)
+#define USE_CLSR BIT(9)
+#define USE_FSR BIT(10)
+#define SPI_NOR_XSR_RDY BIT(11)
+
+ u8 no_sfdp_flags;
+#define SPI_NOR_SKIP_SFDP BIT(0)
+#define SECT_4K BIT(1)
+#define SECT_4K_PMC BIT(2)
+#define SPI_NOR_DUAL_READ BIT(3)
+#define SPI_NOR_QUAD_READ BIT(4)
+#define SPI_NOR_OCTAL_READ BIT(5)
+#define SPI_NOR_OCTAL_DTR_READ BIT(6)
+#define SPI_NOR_OCTAL_DTR_PP BIT(7)
+
+ u8 fixup_flags;
+#define SPI_NOR_4B_OPCODES BIT(0)
+#define SPI_NOR_IO_MODE_EN_VOLATILE BIT(1)
+
+ u8 mfr_flags;
const struct spi_nor_otp_organization otp_org;
-
- /* Part specific fixup hooks. */
const struct spi_nor_fixups *fixups;
};
/* Used when the "_ext_id" is two bytes at most */
-#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors) \
.id = { \
((_jedec_id) >> 16) & 0xff, \
((_jedec_id) >> 8) & 0xff, \
@@ -410,9 +436,8 @@ struct flash_info {
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = 256, \
- .flags = (_flags),
-#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors) \
.id = { \
((_jedec_id) >> 16) & 0xff, \
((_jedec_id) >> 8) & 0xff, \
@@ -425,14 +450,13 @@ struct flash_info {
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = 256, \
- .flags = (_flags),
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width) \
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = (_page_size), \
.addr_width = (_addr_width), \
- .flags = (_flags),
+ .flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR, \
#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \
.id = { \
@@ -455,6 +479,18 @@ struct flash_info {
.n_regions = (_n_regions), \
},
+#define PARSE_SFDP \
+ .parse_sfdp = true, \
+
+#define FLAGS(_flags) \
+ .flags = (_flags), \
+
+#define NO_SFDP_FLAGS(_no_sfdp_flags) \
+ .no_sfdp_flags = (_no_sfdp_flags), \
+
+#define FIXUP_FLAGS(_fixup_flags) \
+ .fixup_flags = (_fixup_flags), \
+
#define MFR_FLAGS(_mfr_flags) \
.mfr_flags = (_mfr_flags), \
diff --git a/drivers/mtd/spi-nor/eon.c b/drivers/mtd/spi-nor/eon.c
index ddb8e3650835..4f3ee6331f37 100644
--- a/drivers/mtd/spi-nor/eon.c
+++ b/drivers/mtd/spi-nor/eon.c
@@ -10,21 +10,24 @@
static const struct flash_info eon_parts[] = {
/* EON -- en25xxx */
- { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) },
- { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
- { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
- { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
- { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
- { "en25q80a", INFO(0x1c3014, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "en25qh16", INFO(0x1c7015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64, 0) },
- { "en25qh64", INFO(0x1c7017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },
- { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },
- { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) },
+ { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64) },
+ { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64) },
+ { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128) },
+ { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "en25q80a", INFO(0x1c3014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "en25qh16", INFO(0x1c7015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64) },
+ { "en25qh64", INFO(0x1c7017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256) },
+ { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512) },
+ { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
};
const struct spi_nor_manufacturer spi_nor_eon = {
diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c
index cfc9218c1053..ace1da221566 100644
--- a/drivers/mtd/spi-nor/esmt.c
+++ b/drivers/mtd/spi-nor/esmt.c
@@ -10,12 +10,15 @@
static const struct flash_info esmt_parts[] = {
/* ESMT */
- { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
- { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_HAS_LOCK) },
- { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_HAS_LOCK) },
+ { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK)
+ NO_SFDP_FLAGS(SECT_4K) },
};
const struct spi_nor_manufacturer spi_nor_esmt = {
diff --git a/drivers/mtd/spi-nor/everspin.c b/drivers/mtd/spi-nor/everspin.c
index 04a177a32283..f6c6fb36a428 100644
--- a/drivers/mtd/spi-nor/everspin.c
+++ b/drivers/mtd/spi-nor/everspin.c
@@ -10,14 +10,10 @@
static const struct flash_info everspin_parts[] = {
/* Everspin */
- { "mr25h128", CAT25_INFO(16 * 1024, 1, 256, 2,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "mr25h256", CAT25_INFO(32 * 1024, 1, 256, 2,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "mr25h40", CAT25_INFO(512 * 1024, 1, 256, 3,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ { "mr25h128", CAT25_INFO(16 * 1024, 1, 256, 2) },
+ { "mr25h256", CAT25_INFO(32 * 1024, 1, 256, 2) },
+ { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3) },
+ { "mr25h40", CAT25_INFO(512 * 1024, 1, 256, 3) },
};
const struct spi_nor_manufacturer spi_nor_everspin = {
diff --git a/drivers/mtd/spi-nor/fujitsu.c b/drivers/mtd/spi-nor/fujitsu.c
index e385d93e756c..5fa8f04f2e35 100644
--- a/drivers/mtd/spi-nor/fujitsu.c
+++ b/drivers/mtd/spi-nor/fujitsu.c
@@ -10,7 +10,8 @@
static const struct flash_info fujitsu_parts[] = {
/* Fujitsu */
- { "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },
+ { "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1)
+ FLAGS(SPI_NOR_NO_ERASE) },
};
const struct spi_nor_manufacturer spi_nor_fujitsu = {
diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
index 447d84bb2128..94634797fdd6 100644
--- a/drivers/mtd/spi-nor/gigadevice.c
+++ b/drivers/mtd/spi-nor/gigadevice.c
@@ -24,31 +24,39 @@ static struct spi_nor_fixups gd25q256_fixups = {
};
static const struct flash_info gigadevice_parts[] = {
- { "gd25q16", INFO(0xc84015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25lq128d", INFO(0xc86018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK |
- SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
+ { "gd25q16", INFO(0xc84015, 0, 64 * 1024, 32)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25lq128d", INFO(0xc86018, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_TB_SR_BIT6)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
.fixups = &gd25q256_fixups },
};
diff --git a/drivers/mtd/spi-nor/intel.c b/drivers/mtd/spi-nor/intel.c
index 8ece9cceb3cf..d64e114e9fb4 100644
--- a/drivers/mtd/spi-nor/intel.c
+++ b/drivers/mtd/spi-nor/intel.c
@@ -10,12 +10,12 @@
static const struct flash_info intel_parts[] = {
/* Intel/Numonyx -- xxxs33b */
- { "160s33b", INFO(0x898911, 0, 64 * 1024, 32,
- SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
- { "320s33b", INFO(0x898912, 0, 64 * 1024, 64,
- SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
- { "640s33b", INFO(0x898913, 0, 64 * 1024, 128,
- SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ { "160s33b", INFO(0x898911, 0, 64 * 1024, 32)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ { "320s33b", INFO(0x898912, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ { "640s33b", INFO(0x898913, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
};
const struct spi_nor_manufacturer spi_nor_intel = {
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 1e5bb5408b68..6707fcfda055 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -31,38 +31,42 @@ static struct spi_nor_fixups is25lp256_fixups = {
static const struct flash_info issi_parts[] = {
/* ISSI */
- { "is25cd512", INFO(0x7f9d20, 0, 32 * 1024, 2, SECT_4K) },
- { "is25lq040b", INFO(0x9d4013, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25lp016d", INFO(0x9d6015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25lp080d", INFO(0x9d6014, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25lp032", INFO(0x9d6016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "is25lp064", INFO(0x9d6017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "is25lp128", INFO(0x9d6018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES)
+ { "is25cd512", INFO(0x7f9d20, 0, 32 * 1024, 2)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "is25lq040b", INFO(0x9d4013, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25lp016d", INFO(0x9d6015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25lp080d", INFO(0x9d6014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25lp032", INFO(0x9d6016, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "is25lp064", INFO(0x9d6017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "is25lp128", INFO(0x9d6018, 0, 64 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
.fixups = &is25lp256_fixups },
- { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES)
+ { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
.fixups = &is25lp256_fixups },
/* PMC */
- { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
- { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
- { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) },
+ { "pm25lv512", INFO(0, 0, 32 * 1024, 2)
+ NO_SFDP_FLAGS(SECT_4K_PMC) },
+ { "pm25lv010", INFO(0, 0, 32 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K_PMC) },
+ { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
};
static void issi_default_init(struct spi_nor *nor)
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index 27498ed0cc0d..67aaa83038b6 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -34,59 +34,72 @@ static struct spi_nor_fixups mx25l25635_fixups = {
static const struct flash_info macronix_parts[] = {
/* Macronix */
- { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) },
- { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) },
- { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
- { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
- { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) },
- { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, SECT_4K) },
- { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) },
- { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
- { "mx25u2033e", INFO(0xc22532, 0, 64 * 1024, 4, SECT_4K) },
- { "mx25u3235f", INFO(0xc22536, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16) },
+ { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25u2033e", INFO(0xc22532, 0, 64 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25u3235f", INFO(0xc22536, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "mx25u4035", INFO(0xc22533, 0, 64 * 1024, 8, SECT_4K) },
- { "mx25u8035", INFO(0xc22534, 0, 64 * 1024, 16, SECT_4K) },
- { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
- { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, SECT_4K |
- SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP) },
- { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- { "mx25r1635f", INFO(0xc22815, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "mx25u4035", INFO(0xc22533, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25u8035", INFO(0xc22534, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256) },
+ { "mx25r1635f", INFO(0xc22815, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
.fixups = &mx25l25635_fixups },
- { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_4B_OPCODES) },
- { "mx25u51245g", INFO(0xc2253a, 0, 64 * 1024, 1024,
- SECT_4K | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "mx25v8035f", INFO(0xc22314, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "mx25u51245g", INFO(0xc2253a, 0, 64 * 1024, 1024)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "mx25v8035f", INFO(0xc22314, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- { "mx66l51235f", INFO(0xc2201a, 0, 64 * 1024, 1024,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES) },
- { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024,
- SECT_4K | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512) },
+ { "mx66l51235f", INFO(0xc2201a, 0, 64 * 1024, 1024)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048,
- SPI_NOR_QUAD_READ) },
- { "mx66u2g45g", INFO(0xc2253c, 0, 64 * 1024, 4096,
- SECT_4K | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+ { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048)
+ NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
+ { "mx66u2g45g", INFO(0xc2253c, 0, 64 * 1024, 4096)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
};
static void macronix_default_init(struct spi_nor *nor)
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index f3d19b716b7b..bd04cccde6f5 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -119,110 +119,123 @@ static struct spi_nor_fixups mt35xu512aba_fixups = {
};
static const struct flash_info micron_parts[] = {
- { "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512,
- SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
- SPI_NOR_4B_OPCODES | SPI_NOR_OCTAL_DTR_READ |
- SPI_NOR_OCTAL_DTR_PP |
- SPI_NOR_IO_MODE_EN_VOLATILE)
- .fixups = &mt35xu512aba_fixups},
- { "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048,
- SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
- SPI_NOR_4B_OPCODES) },
+ { "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_READ |
+ SPI_NOR_OCTAL_DTR_READ | SPI_NOR_OCTAL_DTR_PP)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES | SPI_NOR_IO_MODE_EN_VOLATILE)
+ .fixups = &mt35xu512aba_fixups},
+ { "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
};
static const struct flash_info st_parts[] = {
- { "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64,
+ { "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
+ { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
+ { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "mt25ql256a", INFO6(0x20ba19, 0x104400, 64 * 1024, 512)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64,
+ { "mt25qu256a", INFO6(0x20bb19, 0x104400, 64 * 1024, 512)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "mt25ql512a", INFO6(0x20ba20, 0x104400, 64 * 1024, 1024)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024)
+ FLAGS(USE_FSR | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "mt25qu512a", INFO6(0x20bb20, 0x104400, 64 * 1024, 1024)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 |
+ NO_CHIP_ERASE | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048)
+ FLAGS(NO_CHIP_ERASE | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096)
+ FLAGS(NO_CHIP_ERASE | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096)
+ FLAGS(NO_CHIP_ERASE | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
- { "mt25ql256a", INFO6(0x20ba19, 0x104400, 64 * 1024, 512,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K |
- USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ) },
- { "mt25qu256a", INFO6(0x20bb19, 0x104400, 64 * 1024, 512,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
- { "mt25ql512a", INFO6(0x20ba20, 0x104400, 64 * 1024, 1024,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
- { "mt25qu512a", INFO6(0x20bb20, 0x104400, 64 * 1024, 1024,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
- { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 |
- NO_CHIP_ERASE) },
- { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- NO_CHIP_ERASE) },
- { "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- NO_CHIP_ERASE) },
- { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
-
- { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) },
- { "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) },
- { "m25p20", INFO(0x202012, 0, 64 * 1024, 4, 0) },
- { "m25p40", INFO(0x202013, 0, 64 * 1024, 8, 0) },
- { "m25p80", INFO(0x202014, 0, 64 * 1024, 16, 0) },
- { "m25p16", INFO(0x202015, 0, 64 * 1024, 32, 0) },
- { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) },
- { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
- { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },
-
- { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) },
- { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) },
- { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4, 0) },
- { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8, 0) },
- { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16, 0) },
- { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32, 0) },
- { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64, 0) },
- { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128, 0) },
- { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64, 0) },
-
- { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) },
- { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) },
- { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) },
-
- { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4, 0) },
- { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) },
- { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) },
-
- { "m25px16", INFO(0x207115, 0, 64 * 1024, 32, SECT_4K) },
- { "m25px32", INFO(0x207116, 0, 64 * 1024, 64, SECT_4K) },
- { "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64, SECT_4K) },
- { "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64, SECT_4K) },
- { "m25px64", INFO(0x207117, 0, 64 * 1024, 128, 0) },
- { "m25px80", INFO(0x207114, 0, 64 * 1024, 16, 0) },
+
+ { "m25p05", INFO(0x202010, 0, 32 * 1024, 2) },
+ { "m25p10", INFO(0x202011, 0, 32 * 1024, 4) },
+ { "m25p20", INFO(0x202012, 0, 64 * 1024, 4) },
+ { "m25p40", INFO(0x202013, 0, 64 * 1024, 8) },
+ { "m25p80", INFO(0x202014, 0, 64 * 1024, 16) },
+ { "m25p16", INFO(0x202015, 0, 64 * 1024, 32) },
+ { "m25p32", INFO(0x202016, 0, 64 * 1024, 64) },
+ { "m25p64", INFO(0x202017, 0, 64 * 1024, 128) },
+ { "m25p128", INFO(0x202018, 0, 256 * 1024, 64) },
+
+ { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2) },
+ { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4) },
+ { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4) },
+ { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8) },
+ { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16) },
+ { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32) },
+ { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64) },
+ { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128) },
+ { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64) },
+
+ { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2) },
+ { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16) },
+ { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32) },
+
+ { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4) },
+ { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16) },
+ { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K) },
+
+ { "m25px16", INFO(0x207115, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "m25px32", INFO(0x207116, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "m25px64", INFO(0x207117, 0, 64 * 1024, 128) },
+ { "m25px80", INFO(0x207114, 0, 64 * 1024, 16) },
};
/**
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index a3ea0135f7b1..1282a759cd75 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -198,81 +198,90 @@ static const struct flash_info spansion_parts[] = {
/* Spansion/Cypress -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
*/
- { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | USE_CLSR) },
- { "s25fs128s1", INFO6(0x012018, 0x4d0181, 64 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
- .fixups = &s25fs_s_fixups, },
- { "s25fs256s0", INFO6(0x010219, 0x4d0081, 256 * 1024, 128,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
- .fixups = &s25fs_s_fixups, },
- { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
- { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
- { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) },
- { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) },
- { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) },
- { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) },
- { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) },
- { "s25fl004k", INFO(0xef4013, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) },
- { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
- { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "s25fl208k", INFO(0x014014, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES) },
- { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES) },
- { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES) },
- { "cy15x104q", INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1,
- SPI_NOR_NO_ERASE) },
- { "s28hs512t", INFO(0x345b1a, 0, 256 * 1024, 256,
- SECT_4K | SPI_NOR_OCTAL_DTR_READ |
- SPI_NOR_OCTAL_DTR_PP)
- .fixups = &s28hs512t_fixups,
+ { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fs128s1", INFO6(0x012018, 0x4d0181, 64 * 1024, 256)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ .fixups = &s25fs_s_fixups, },
+ { "s25fs256s0", INFO6(0x010219, 0x4d0081, 256 * 1024, 128)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ .fixups = &s25fs_s_fixups, },
+ { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64) },
+ { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256) },
+ { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8) },
+ { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16) },
+ { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32) },
+ { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64) },
+ { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128) },
+ { "s25fl004k", INFO(0xef4013, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "s25fl208k", INFO(0x014014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "cy15x104q", INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1)
+ FLAGS(SPI_NOR_NO_ERASE) },
+ { "s28hs512t", INFO(0x345b1a, 0, 256 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+ SPI_NOR_OCTAL_DTR_PP)
+ .fixups = &s28hs512t_fixups,
},
};
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 8f1ebb8fd05f..ac150f275237 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -60,55 +60,60 @@ static const struct spi_nor_fixups sst26vf_fixups = {
static const struct flash_info sst_parts[] = {
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
- { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_4BIT_BP | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE) },
- { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP |
+ SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4, SECT_4K | SPI_NOR_HAS_LOCK) },
- { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_HAS_LOCK) },
- { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4)
+ FLAGS(SPI_NOR_HAS_LOCK)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8)
+ FLAGS(SPI_NOR_HAS_LOCK)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ { "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
.fixups = &sst26vf_fixups },
};
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index dd4be0f78e67..421509406368 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -34,74 +34,100 @@ static struct spi_nor_fixups w25q256_fixups = {
static const struct flash_info winbond_parts[] = {
/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
- { "w25x05", INFO(0xef3010, 0, 64 * 1024, 1, SECT_4K) },
- { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) },
- { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) },
- { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
- { "w25q16dw", INFO(0xef6015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
- { "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK |
- SPI_NOR_HAS_TB) },
- { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25q20ew", INFO(0xef6012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
- { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- OTP_INFO(256, 3, 0x1000, 0x1000)
- },
-
- { "w25q32jv", INFO(0xef7016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- { "w25q32jwm", INFO(0xef8016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- OTP_INFO(256, 3, 0x1000, 0x1000) },
- { "w25q64jwm", INFO(0xef8017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25q128jwm", INFO(0xef8018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25q256jwm", INFO(0xef8019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
- { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25q64jvm", INFO(0xef7017, 0, 64 * 1024, 128, SECT_4K) },
- { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
- { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
- .fixups = &w25q256_fixups },
- { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
- SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
- { "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "w25x05", INFO(0xef3010, 0, 64 * 1024, 1)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q16dw", INFO(0xef6015, 0, 64 * 1024, 32)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024, 32)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q20ew", INFO(0xef6012, 0, 64 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ OTP_INFO(256, 3, 0x1000, 0x1000) },
+ { "w25q32jv", INFO(0xef7016, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q32jwm", INFO(0xef8016, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ OTP_INFO(256, 3, 0x1000, 0x1000) },
+ { "w25q64jwm", INFO(0xef8017, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q128jwm", INFO(0xef8018, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q256jwm", INFO(0xef8019, 0, 64 * 1024, 512)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q64jvm", INFO(0xef7017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ .fixups = &w25q256_fixups },
+ { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ |
+ SPI_NOR_DUAL_READ) },
+ { "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
};
/**
diff --git a/drivers/mtd/spi-nor/xmc.c b/drivers/mtd/spi-nor/xmc.c
index 2c7773b68993..2992af03cb0a 100644
--- a/drivers/mtd/spi-nor/xmc.c
+++ b/drivers/mtd/spi-nor/xmc.c
@@ -10,10 +10,12 @@
static const struct flash_info xmc_parts[] = {
/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
- { "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
};
const struct spi_nor_manufacturer spi_nor_xmc = {
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 05/13] mtd: spi-nor: Rework the flash_info flags
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
Clarify for what the flash_info flags are used for. Split them in
four categories and a bool:
1/ FLAGS: flags that indicate support that is not defined by the JESD216
standard in its SFDP tables.
2/ NO_SFDP_FLAGS: these flags are used when the flash does not define the
SFDP tables. These flags indicate support that can be discovered via
SFDP. Used together with SPI_NOR_SKIP_SFDP flag.
3/ FIXUP_FLAGS: flags that indicate support that can be discovered
via SFDP ideally, but can not be discovered for this particular flash
because the SFDP table that indicates this support is not defined by
the flash. In case the table for this support is defined but has wrong
values, one should instead use a post_sfdp() hook to set the SNOR_F
equivalent flag.
4/ MFR_FLAGS: manufacturer private flags. Used in the manufacturer
fixup hooks to differentiate support between flashes of the same
manufacturer.
5/ PARSE_SFDP: sets info->parse_sfdp to true. All flash_info entries
that support SFDP should be converted to set info->parse_sfdp to true.
SPI NOR flashes that statically declare one of the
SPI_NOR_{DUAL, QUAD, OCTAL, OCTAL_DTR}_READ flags and do not support
the RDSFDP command are gratuiously receiving the RDSFDP command
in the attempt of parsing the SFDP tables. It is not desirable to issue
commands that are not supported, so introduce PARSE_SFDP to help on this
situation.
New flash additions/updates should be declared/updated to use either
PARSE_SFDP or SPI_NOR_SKIP_SFDP. Once all the flash_info entries are
converted to use SPI_NOR_SKIP_SFDP or PARSE_SFDP, we can get rid of the
SPI_NOR_SKIP_SFDP flag and use just the bool nor->info->parse_sfdp to
determine whether to parse SFDP or not. SPI_NOR_SKIP_SFDP flag is kept
just as a way to differentiate whether a flash is converted to the new
flags logic or not.
Support that can be discovered when parsing SFDP should not be duplicated
by explicit flags at flash declaration. All the flash parameters will be
discovered when parsing SFDP. Sometimes manufacturers wrongly define some
fields in the SFDP tables. If that's the case, SFDP data can be amended
with the fixups() hooks. It is not common, but if the SFDP tables are
entirely wrong, and it does not worth the hassle to tweak the SFDP
parameters by using the fixups hooks, or if the flash does not define the
SFDP tables at all, then statically init the flash with the
SPI_NOR_SKIP_SFDP flag and specify the rest of flash capabilities with
the flash info flags.
With time, we want to convert all flashes to use PARSE_SFDP and
stop triggering the SFDP parsing with the
SPI_NOR_{DUAL, QUAD, OCTAL*}_READ flags. Getting rid of the
SPI_NOR_{OCTAL, OCTAL_DTR}_READ trigger is easily achievable,
the rest are a long term goal.
Manufacturer specific flags like USE_CLSR, USE_FSR, SPI_NOR_XSR_RDY,
will be removed in a future series.
No functional changes intended in this patch.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: new patch, complete rework
drivers/mtd/spi-nor/atmel.c | 71 ++++++-----
drivers/mtd/spi-nor/catalyst.c | 15 +--
drivers/mtd/spi-nor/core.c | 52 ++++----
drivers/mtd/spi-nor/core.h | 204 ++++++++++++++++++------------
drivers/mtd/spi-nor/eon.c | 33 ++---
drivers/mtd/spi-nor/esmt.c | 15 ++-
drivers/mtd/spi-nor/everspin.c | 12 +-
drivers/mtd/spi-nor/fujitsu.c | 3 +-
drivers/mtd/spi-nor/gigadevice.c | 58 +++++----
drivers/mtd/spi-nor/intel.c | 12 +-
drivers/mtd/spi-nor/issi.c | 60 +++++----
drivers/mtd/spi-nor/macronix.c | 105 ++++++++-------
drivers/mtd/spi-nor/micron-st.c | 211 ++++++++++++++++---------------
drivers/mtd/spi-nor/spansion.c | 159 ++++++++++++-----------
drivers/mtd/spi-nor/sst.c | 83 ++++++------
drivers/mtd/spi-nor/winbond.c | 162 ++++++++++++++----------
drivers/mtd/spi-nor/xmc.c | 10 +-
17 files changed, 698 insertions(+), 567 deletions(-)
diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
index d0e7883b38e3..d6d889ce8876 100644
--- a/drivers/mtd/spi-nor/atmel.c
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -157,39 +157,48 @@ static const struct spi_nor_fixups atmel_global_protection_fixups = {
static const struct flash_info atmel_parts[] = {
/* Atmel -- some are (confusingly) marketed as "DataFlash" */
- { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K | SPI_NOR_HAS_LOCK)
+ { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4)
+ FLAGS(SPI_NOR_HAS_LOCK)
+ NO_SFDP_FLAGS(SECT_4K)
.fixups = &atmel_at25fs_fixups },
- { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_HAS_LOCK)
+ { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8)
+ FLAGS(SPI_NOR_HAS_LOCK)
+ NO_SFDP_FLAGS(SECT_4K)
.fixups = &atmel_at25fs_fixups },
-
- { "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
- { "at25df321", INFO(0x1f4700, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
- { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
- { "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
-
- { "at25sl321", INFO(0x1f4216, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-
- { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) },
- { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
- { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
- { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- .fixups = &atmel_global_protection_fixups },
-
- { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
+ { "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at25df321", INFO(0x1f4700, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at25sl321", INFO(0x1f4216, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &atmel_global_protection_fixups },
+ { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K) },
};
const struct spi_nor_manufacturer spi_nor_atmel = {
diff --git a/drivers/mtd/spi-nor/catalyst.c b/drivers/mtd/spi-nor/catalyst.c
index 011b83e99e95..ae4d67e01bb3 100644
--- a/drivers/mtd/spi-nor/catalyst.c
+++ b/drivers/mtd/spi-nor/catalyst.c
@@ -10,16 +10,11 @@
static const struct flash_info catalyst_parts[] = {
/* Catalyst / On Semiconductor -- non-JEDEC */
- { "cat25c11", CAT25_INFO(16, 8, 16, 1,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "cat25c03", CAT25_INFO(32, 8, 16, 2,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "cat25c09", CAT25_INFO(128, 8, 32, 2,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "cat25c17", CAT25_INFO(256, 8, 32, 2,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "cat25128", CAT25_INFO(2048, 8, 64, 2,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ { "cat25c11", CAT25_INFO(16, 8, 16, 1) },
+ { "cat25c03", CAT25_INFO(32, 8, 16, 2) },
+ { "cat25c09", CAT25_INFO(128, 8, 32, 2) },
+ { "cat25c17", CAT25_INFO(256, 8, 32, 2) },
+ { "cat25128", CAT25_INFO(2048, 8, 64, 2) },
};
const struct spi_nor_manufacturer spi_nor_catalyst = {
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 644f3b7976c9..a2d09b722fed 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2540,6 +2540,7 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
struct spi_nor_erase_map *map = ¶ms->erase_map;
const struct flash_info *info = nor->info;
struct device_node *np = spi_nor_get_flash_node(nor);
+ const u8 no_sfdp_flags = info->no_sfdp_flags;
u8 i, erase_mask;
/* Initialize default flash parameters and settings. */
@@ -2576,28 +2577,28 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
0, 8, SPINOR_OP_READ_FAST,
SNOR_PROTO_1_1_1);
- if (info->flags & SPI_NOR_DUAL_READ) {
+ if (no_sfdp_flags & SPI_NOR_DUAL_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2],
0, 8, SPINOR_OP_READ_1_1_2,
SNOR_PROTO_1_1_2);
}
- if (info->flags & SPI_NOR_QUAD_READ) {
+ if (no_sfdp_flags & SPI_NOR_QUAD_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_4],
0, 8, SPINOR_OP_READ_1_1_4,
SNOR_PROTO_1_1_4);
}
- if (info->flags & SPI_NOR_OCTAL_READ) {
+ if (no_sfdp_flags & SPI_NOR_OCTAL_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_8],
0, 8, SPINOR_OP_READ_1_1_8,
SNOR_PROTO_1_1_8);
}
- if (info->flags & SPI_NOR_OCTAL_DTR_READ) {
+ if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR;
spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_8_8_8_DTR],
0, 20, SPINOR_OP_READ_FAST,
@@ -2609,7 +2610,7 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP],
SPINOR_OP_PP, SNOR_PROTO_1_1_1);
- if (info->flags & SPI_NOR_OCTAL_DTR_PP) {
+ if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_PP) {
params->hwcaps.mask |= SNOR_HWCAPS_PP_8_8_8_DTR;
/*
* Since xSPI Page Program opcode is backward compatible with
@@ -2625,12 +2626,12 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
*/
erase_mask = 0;
i = 0;
- if (info->flags & SECT_4K_PMC) {
+ if (no_sfdp_flags & SECT_4K_PMC) {
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], 4096u,
SPINOR_OP_BE_4K_PMC);
i++;
- } else if (info->flags & SECT_4K) {
+ } else if (no_sfdp_flags & SECT_4K) {
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], 4096u,
SPINOR_OP_BE_4K);
@@ -2712,9 +2713,12 @@ static int spi_nor_init_params(struct spi_nor *nor)
spi_nor_manufacturer_init_params(nor);
- if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_OCTAL_READ | SPI_NOR_OCTAL_DTR_READ)) &&
- !(nor->info->flags & SPI_NOR_SKIP_SFDP))
+ if ((nor->info->parse_sfdp ||
+ (nor->info->no_sfdp_flags & (SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ |
+ SPI_NOR_OCTAL_READ |
+ SPI_NOR_OCTAL_DTR_READ))) &&
+ !(nor->info->no_sfdp_flags & SPI_NOR_SKIP_SFDP))
spi_nor_sfdp_init_params(nor);
spi_nor_late_init_params(nor);
@@ -3093,6 +3097,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
struct device_node *np = spi_nor_get_flash_node(nor);
int ret;
int i;
+ u16 flags;
+ u8 fixup_flags;
ret = spi_nor_check(nor);
if (ret)
@@ -3122,6 +3128,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
return PTR_ERR(info);
nor->info = info;
+ flags = info->flags;
spi_nor_debugfs_init(nor, info);
@@ -3132,10 +3139,10 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
* spi_nor_wait_till_ready(). Xilinx S3AN share MFR
* with Atmel SPI NOR.
*/
- if (info->flags & SPI_NOR_XSR_RDY)
+ if (flags & SPI_NOR_XSR_RDY)
nor->flags |= SNOR_F_READY_XSR_RDY;
- if (info->flags & SPI_NOR_HAS_LOCK)
+ if (flags & SPI_NOR_HAS_LOCK)
nor->flags |= SNOR_F_HAS_LOCK;
/* Init flash parameters based on flash_info struct and SFDP */
@@ -3143,24 +3150,24 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (ret)
return ret;
- if (info->flags & USE_FSR)
+ if (flags & USE_FSR)
nor->flags |= SNOR_F_USE_FSR;
- if (info->flags & SPI_NOR_HAS_TB) {
+ if (flags & SPI_NOR_HAS_TB) {
nor->flags |= SNOR_F_HAS_SR_TB;
- if (info->flags & SPI_NOR_TB_SR_BIT6)
+ if (flags & SPI_NOR_TB_SR_BIT6)
nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
}
- if (info->flags & NO_CHIP_ERASE)
+ if (flags & NO_CHIP_ERASE)
nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
- if (info->flags & USE_CLSR)
+ if (flags & USE_CLSR)
nor->flags |= SNOR_F_USE_CLSR;
- if (info->flags & SPI_NOR_SWP_IS_VOLATILE)
+ if (flags & SPI_NOR_SWP_IS_VOLATILE)
nor->flags |= SNOR_F_SWP_IS_VOLATILE;
- if (info->flags & SPI_NOR_4BIT_BP) {
+ if (flags & SPI_NOR_4BIT_BP) {
nor->flags |= SNOR_F_HAS_4BIT_BP;
- if (info->flags & SPI_NOR_BP3_SR_BIT6)
+ if (flags & SPI_NOR_BP3_SR_BIT6)
nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
}
@@ -3177,10 +3184,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (ret)
return ret;
- if (info->flags & SPI_NOR_4B_OPCODES)
+ fixup_flags = info->fixup_flags;
+ if (fixup_flags & SPI_NOR_4B_OPCODES)
nor->flags |= SNOR_F_4B_OPCODES;
- if (info->flags & SPI_NOR_IO_MODE_EN_VOLATILE)
+ if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
ret = spi_nor_set_addr_width(nor);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index a9fd956eed4e..2afb610853a9 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -313,92 +313,118 @@ struct spi_nor_fixups {
void (*late_init)(struct spi_nor *nor);
};
+/**
+ * struct flash_info - SPI NOR flash_info entry.
+ * @name: the name of the flash.
+ * @id: the flash's ID bytes. The first three bytes are the
+ * JEDIC ID. JEDEC ID zero means "no ID" (mostly older chips).
+ * @id_len: the number of bytes of ID.
+ * @sector_size: the size listed here is what works with SPINOR_OP_SE, which
+ * isn't necessarily called a "sector" by the vendor.
+ * @n_sectors: the number of sectors.
+ * @page_size: the flash's page size.
+ * @addr_width: the flash's address width.
+ *
+ * @parse_sfdp: true when flash supports SFDP tables. The false value has no
+ * meaning. If one wants to skip the SFDP tables, one should
+ * instead use the SPI_NOR_SKIP_SFDP sfdp_flag.
+ * @flags: flags that indicate support that is not defined by the
+ * JESD216 standard in its SFDP tables. Flag meanings:
+ * SPI_NOR_HAS_LOCK: flash supports lock/unlock via SR
+ * SPI_NOR_HAS_TB: flash SR has Top/Bottom (TB) protect bit. Must be
+ * used with SPI_NOR_HAS_LOCK.
+ * SPI_NOR_TB_SR_BIT6: Top/Bottom (TB) is bit 6 of status register.
+ * Must be used with SPI_NOR_HAS_TB.
+ * SPI_NOR_4BIT_BP: flash SR has 4 bit fields (BP0-3) for block
+ * protection.
+ * SPI_NOR_BP3_SR_BIT6: BP3 is bit 6 of status register. Must be used with
+ * SPI_NOR_4BIT_BP.
+ * SPI_NOR_SWP_IS_VOLATILE: flash has volatile software write protection bits.
+ * Usually these will power-up in a write-protected
+ * state.
+ * SPI_NOR_NO_ERASE: no erase command needed.
+ * NO_CHIP_ERASE: chip does not support chip erase.
+ * SPI_NOR_NO_FR: can't do fastread.
+ * USE_CLSR: use CLSR command.
+ * USE_FSR: use flag status register
+ * SPI_NOR_XSR_RDY: S3AN flashes have specific opcode to read the
+ * status register.
+ *
+ * @no_sfdp_flags: flags that indicate support that can be discovered via SFDP.
+ * Used when SFDP tables are not defined in the flash. These
+ * flags are used together with the SPI_NOR_SKIP_SFDP flag.
+ * SPI_NOR_SKIP_SFDP: skip parsing of SFDP tables.
+ * SECT_4K: SPINOR_OP_BE_4K works uniformly.
+ * SECT_4K_PMC: SPINOR_OP_BE_4K_PMC works uniformly.
+ * SPI_NOR_DUAL_READ: flash supports Dual Read.
+ * SPI_NOR_QUAD_READ: flash supports Quad Read.
+ * SPI_NOR_OCTAL_READ: flash supports Octal Read.
+ * SPI_NOR_OCTAL_DTR_READ: flash supports octal DTR Read.
+ * SPI_NOR_OCTAL_DTR_PP: flash supports Octal DTR Page Program.
+ *
+ * @fixup_flags: flags that indicate support that can be discovered via SFDP
+ * ideally, but can not be discovered for this particular flash
+ * because the SFDP table that indicates this support is not
+ * defined by the flash. In case the table for this support is
+ * defined but has wrong values, one should instead use a
+ * post_sfdp() hook to set the SNOR_F equivalent flag.
+ *
+ * SPI_NOR_4B_OPCODES: use dedicated 4byte address op codes to support
+ * memory size above 128Mib.
+ * SPI_NOR_IO_MODE_EN_VOLATILE: flash enables the best available I/O mode
+ * via a volatile bit.
+ * @mfr_flags: manufacturer private flags. Used in the manufacturer fixup
+ * hooks to differentiate support between flashes of the same
+ * manufacturer.
+ * @otp_org: flash's OTP organization.
+ * @fixups: part specific fixup hooks.
+ */
struct flash_info {
- char *name;
-
- /*
- * This array stores the ID bytes.
- * The first three bytes are the JEDIC ID.
- * JEDEC ID zero means "no ID" (mostly older chips).
- */
- u8 id[SPI_NOR_MAX_ID_LEN];
- u8 id_len;
-
- /* The size listed here is what works with SPINOR_OP_SE, which isn't
- * necessarily called a "sector" by the vendor.
- */
- unsigned sector_size;
- u16 n_sectors;
-
- u16 page_size;
- u16 addr_width;
-
- u32 flags;
-#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */
-#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */
-#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */
-#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */
-#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */
-#define SPI_NOR_QUAD_READ BIT(6) /* Flash supports Quad Read */
-#define USE_FSR BIT(7) /* use flag status register */
-#define SPI_NOR_HAS_LOCK BIT(8) /* Flash supports lock/unlock via SR */
-#define SPI_NOR_HAS_TB BIT(9) /*
- * Flash SR has Top/Bottom (TB) protect
- * bit. Must be used with
- * SPI_NOR_HAS_LOCK.
- */
-#define SPI_NOR_XSR_RDY BIT(10) /*
- * S3AN flashes have specific opcode to
- * read the status register.
- */
-#define SPI_NOR_4B_OPCODES BIT(11) /*
- * Use dedicated 4byte address op codes
- * to support memory size above 128Mib.
- */
-#define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */
-#define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */
-#define USE_CLSR BIT(14) /* use CLSR command */
-#define SPI_NOR_OCTAL_READ BIT(15) /* Flash supports Octal Read */
-#define SPI_NOR_TB_SR_BIT6 BIT(16) /*
- * Top/Bottom (TB) is bit 6 of
- * status register. Must be used with
- * SPI_NOR_HAS_TB.
- */
-#define SPI_NOR_4BIT_BP BIT(17) /*
- * Flash SR has 4 bit fields (BP0-3)
- * for block protection.
- */
-#define SPI_NOR_BP3_SR_BIT6 BIT(18) /*
- * BP3 is bit 6 of status register.
- * Must be used with SPI_NOR_4BIT_BP.
- */
-#define SPI_NOR_OCTAL_DTR_READ BIT(19) /* Flash supports octal DTR Read. */
-#define SPI_NOR_OCTAL_DTR_PP BIT(20) /* Flash supports Octal DTR Page Program */
-#define SPI_NOR_IO_MODE_EN_VOLATILE BIT(21) /*
- * Flash enables the best
- * available I/O mode via a
- * volatile bit.
- */
-#define SPI_NOR_SWP_IS_VOLATILE BIT(22) /*
- * Flash has volatile software write
- * protection bits. Usually these will
- * power-up in a write-protected state.
- */
- u8 mfr_flags; /*
- * Manufacturer private flags. Used in
- * the manufacturer fixup hooks to
- * differentiate support between flashes
- * of the same manufacturer.
- */
+ char *name;
+ u8 id[SPI_NOR_MAX_ID_LEN];
+ u8 id_len;
+ unsigned sector_size;
+ u16 n_sectors;
+ u16 page_size;
+ u16 addr_width;
+
+ bool parse_sfdp;
+ u16 flags;
+#define SPI_NOR_HAS_LOCK BIT(0)
+#define SPI_NOR_HAS_TB BIT(1)
+#define SPI_NOR_TB_SR_BIT6 BIT(2)
+#define SPI_NOR_4BIT_BP BIT(3)
+#define SPI_NOR_BP3_SR_BIT6 BIT(4)
+#define SPI_NOR_SWP_IS_VOLATILE BIT(5)
+#define SPI_NOR_NO_ERASE BIT(6)
+#define NO_CHIP_ERASE BIT(7)
+#define SPI_NOR_NO_FR BIT(8)
+#define USE_CLSR BIT(9)
+#define USE_FSR BIT(10)
+#define SPI_NOR_XSR_RDY BIT(11)
+
+ u8 no_sfdp_flags;
+#define SPI_NOR_SKIP_SFDP BIT(0)
+#define SECT_4K BIT(1)
+#define SECT_4K_PMC BIT(2)
+#define SPI_NOR_DUAL_READ BIT(3)
+#define SPI_NOR_QUAD_READ BIT(4)
+#define SPI_NOR_OCTAL_READ BIT(5)
+#define SPI_NOR_OCTAL_DTR_READ BIT(6)
+#define SPI_NOR_OCTAL_DTR_PP BIT(7)
+
+ u8 fixup_flags;
+#define SPI_NOR_4B_OPCODES BIT(0)
+#define SPI_NOR_IO_MODE_EN_VOLATILE BIT(1)
+
+ u8 mfr_flags;
const struct spi_nor_otp_organization otp_org;
-
- /* Part specific fixup hooks. */
const struct spi_nor_fixups *fixups;
};
/* Used when the "_ext_id" is two bytes at most */
-#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors) \
.id = { \
((_jedec_id) >> 16) & 0xff, \
((_jedec_id) >> 8) & 0xff, \
@@ -410,9 +436,8 @@ struct flash_info {
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = 256, \
- .flags = (_flags),
-#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors) \
.id = { \
((_jedec_id) >> 16) & 0xff, \
((_jedec_id) >> 8) & 0xff, \
@@ -425,14 +450,13 @@ struct flash_info {
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = 256, \
- .flags = (_flags),
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width) \
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = (_page_size), \
.addr_width = (_addr_width), \
- .flags = (_flags),
+ .flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR, \
#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \
.id = { \
@@ -455,6 +479,18 @@ struct flash_info {
.n_regions = (_n_regions), \
},
+#define PARSE_SFDP \
+ .parse_sfdp = true, \
+
+#define FLAGS(_flags) \
+ .flags = (_flags), \
+
+#define NO_SFDP_FLAGS(_no_sfdp_flags) \
+ .no_sfdp_flags = (_no_sfdp_flags), \
+
+#define FIXUP_FLAGS(_fixup_flags) \
+ .fixup_flags = (_fixup_flags), \
+
#define MFR_FLAGS(_mfr_flags) \
.mfr_flags = (_mfr_flags), \
diff --git a/drivers/mtd/spi-nor/eon.c b/drivers/mtd/spi-nor/eon.c
index ddb8e3650835..4f3ee6331f37 100644
--- a/drivers/mtd/spi-nor/eon.c
+++ b/drivers/mtd/spi-nor/eon.c
@@ -10,21 +10,24 @@
static const struct flash_info eon_parts[] = {
/* EON -- en25xxx */
- { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) },
- { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
- { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
- { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
- { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
- { "en25q80a", INFO(0x1c3014, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "en25qh16", INFO(0x1c7015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64, 0) },
- { "en25qh64", INFO(0x1c7017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },
- { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },
- { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) },
+ { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64) },
+ { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64) },
+ { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128) },
+ { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "en25q80a", INFO(0x1c3014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "en25qh16", INFO(0x1c7015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64) },
+ { "en25qh64", INFO(0x1c7017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256) },
+ { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512) },
+ { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
};
const struct spi_nor_manufacturer spi_nor_eon = {
diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c
index cfc9218c1053..ace1da221566 100644
--- a/drivers/mtd/spi-nor/esmt.c
+++ b/drivers/mtd/spi-nor/esmt.c
@@ -10,12 +10,15 @@
static const struct flash_info esmt_parts[] = {
/* ESMT */
- { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
- { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_HAS_LOCK) },
- { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_HAS_LOCK) },
+ { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK)
+ NO_SFDP_FLAGS(SECT_4K) },
};
const struct spi_nor_manufacturer spi_nor_esmt = {
diff --git a/drivers/mtd/spi-nor/everspin.c b/drivers/mtd/spi-nor/everspin.c
index 04a177a32283..f6c6fb36a428 100644
--- a/drivers/mtd/spi-nor/everspin.c
+++ b/drivers/mtd/spi-nor/everspin.c
@@ -10,14 +10,10 @@
static const struct flash_info everspin_parts[] = {
/* Everspin */
- { "mr25h128", CAT25_INFO(16 * 1024, 1, 256, 2,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "mr25h256", CAT25_INFO(32 * 1024, 1, 256, 2,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "mr25h40", CAT25_INFO(512 * 1024, 1, 256, 3,
- SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ { "mr25h128", CAT25_INFO(16 * 1024, 1, 256, 2) },
+ { "mr25h256", CAT25_INFO(32 * 1024, 1, 256, 2) },
+ { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3) },
+ { "mr25h40", CAT25_INFO(512 * 1024, 1, 256, 3) },
};
const struct spi_nor_manufacturer spi_nor_everspin = {
diff --git a/drivers/mtd/spi-nor/fujitsu.c b/drivers/mtd/spi-nor/fujitsu.c
index e385d93e756c..5fa8f04f2e35 100644
--- a/drivers/mtd/spi-nor/fujitsu.c
+++ b/drivers/mtd/spi-nor/fujitsu.c
@@ -10,7 +10,8 @@
static const struct flash_info fujitsu_parts[] = {
/* Fujitsu */
- { "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },
+ { "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1)
+ FLAGS(SPI_NOR_NO_ERASE) },
};
const struct spi_nor_manufacturer spi_nor_fujitsu = {
diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
index 447d84bb2128..94634797fdd6 100644
--- a/drivers/mtd/spi-nor/gigadevice.c
+++ b/drivers/mtd/spi-nor/gigadevice.c
@@ -24,31 +24,39 @@ static struct spi_nor_fixups gd25q256_fixups = {
};
static const struct flash_info gigadevice_parts[] = {
- { "gd25q16", INFO(0xc84015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25lq128d", INFO(0xc86018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK |
- SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
+ { "gd25q16", INFO(0xc84015, 0, 64 * 1024, 32)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25lq128d", INFO(0xc86018, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_TB_SR_BIT6)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
.fixups = &gd25q256_fixups },
};
diff --git a/drivers/mtd/spi-nor/intel.c b/drivers/mtd/spi-nor/intel.c
index 8ece9cceb3cf..d64e114e9fb4 100644
--- a/drivers/mtd/spi-nor/intel.c
+++ b/drivers/mtd/spi-nor/intel.c
@@ -10,12 +10,12 @@
static const struct flash_info intel_parts[] = {
/* Intel/Numonyx -- xxxs33b */
- { "160s33b", INFO(0x898911, 0, 64 * 1024, 32,
- SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
- { "320s33b", INFO(0x898912, 0, 64 * 1024, 64,
- SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
- { "640s33b", INFO(0x898913, 0, 64 * 1024, 128,
- SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ { "160s33b", INFO(0x898911, 0, 64 * 1024, 32)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ { "320s33b", INFO(0x898912, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+ { "640s33b", INFO(0x898913, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
};
const struct spi_nor_manufacturer spi_nor_intel = {
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 1e5bb5408b68..6707fcfda055 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -31,38 +31,42 @@ static struct spi_nor_fixups is25lp256_fixups = {
static const struct flash_info issi_parts[] = {
/* ISSI */
- { "is25cd512", INFO(0x7f9d20, 0, 32 * 1024, 2, SECT_4K) },
- { "is25lq040b", INFO(0x9d4013, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25lp016d", INFO(0x9d6015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25lp080d", INFO(0x9d6014, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25lp032", INFO(0x9d6016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "is25lp064", INFO(0x9d6017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "is25lp128", INFO(0x9d6018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES)
+ { "is25cd512", INFO(0x7f9d20, 0, 32 * 1024, 2)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "is25lq040b", INFO(0x9d4013, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25lp016d", INFO(0x9d6015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25lp080d", INFO(0x9d6014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25lp032", INFO(0x9d6016, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "is25lp064", INFO(0x9d6017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "is25lp128", INFO(0x9d6018, 0, 64 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
.fixups = &is25lp256_fixups },
- { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES)
+ { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
.fixups = &is25lp256_fixups },
/* PMC */
- { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
- { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
- { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) },
+ { "pm25lv512", INFO(0, 0, 32 * 1024, 2)
+ NO_SFDP_FLAGS(SECT_4K_PMC) },
+ { "pm25lv010", INFO(0, 0, 32 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K_PMC) },
+ { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
};
static void issi_default_init(struct spi_nor *nor)
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index 27498ed0cc0d..67aaa83038b6 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -34,59 +34,72 @@ static struct spi_nor_fixups mx25l25635_fixups = {
static const struct flash_info macronix_parts[] = {
/* Macronix */
- { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) },
- { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) },
- { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
- { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
- { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) },
- { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, SECT_4K) },
- { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) },
- { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
- { "mx25u2033e", INFO(0xc22532, 0, 64 * 1024, 4, SECT_4K) },
- { "mx25u3235f", INFO(0xc22536, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16) },
+ { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25u2033e", INFO(0xc22532, 0, 64 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25u3235f", INFO(0xc22536, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "mx25u4035", INFO(0xc22533, 0, 64 * 1024, 8, SECT_4K) },
- { "mx25u8035", INFO(0xc22534, 0, 64 * 1024, 16, SECT_4K) },
- { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
- { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, SECT_4K |
- SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP) },
- { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- { "mx25r1635f", INFO(0xc22815, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "mx25u4035", INFO(0xc22533, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25u8035", INFO(0xc22534, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256) },
+ { "mx25r1635f", INFO(0xc22815, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
.fixups = &mx25l25635_fixups },
- { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_4B_OPCODES) },
- { "mx25u51245g", INFO(0xc2253a, 0, 64 * 1024, 1024,
- SECT_4K | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "mx25v8035f", INFO(0xc22314, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "mx25u51245g", INFO(0xc2253a, 0, 64 * 1024, 1024)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "mx25v8035f", INFO(0xc22314, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- { "mx66l51235f", INFO(0xc2201a, 0, 64 * 1024, 1024,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES) },
- { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024,
- SECT_4K | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512) },
+ { "mx66l51235f", INFO(0xc2201a, 0, 64 * 1024, 1024)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048,
- SPI_NOR_QUAD_READ) },
- { "mx66u2g45g", INFO(0xc2253c, 0, 64 * 1024, 4096,
- SECT_4K | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+ { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048)
+ NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
+ { "mx66u2g45g", INFO(0xc2253c, 0, 64 * 1024, 4096)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
};
static void macronix_default_init(struct spi_nor *nor)
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index f3d19b716b7b..bd04cccde6f5 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -119,110 +119,123 @@ static struct spi_nor_fixups mt35xu512aba_fixups = {
};
static const struct flash_info micron_parts[] = {
- { "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512,
- SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
- SPI_NOR_4B_OPCODES | SPI_NOR_OCTAL_DTR_READ |
- SPI_NOR_OCTAL_DTR_PP |
- SPI_NOR_IO_MODE_EN_VOLATILE)
- .fixups = &mt35xu512aba_fixups},
- { "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048,
- SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
- SPI_NOR_4B_OPCODES) },
+ { "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_READ |
+ SPI_NOR_OCTAL_DTR_READ | SPI_NOR_OCTAL_DTR_PP)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES | SPI_NOR_IO_MODE_EN_VOLATILE)
+ .fixups = &mt35xu512aba_fixups},
+ { "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
};
static const struct flash_info st_parts[] = {
- { "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64,
+ { "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
+ { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
+ { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "mt25ql256a", INFO6(0x20ba19, 0x104400, 64 * 1024, 512)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64,
+ { "mt25qu256a", INFO6(0x20bb19, 0x104400, 64 * 1024, 512)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "mt25ql512a", INFO6(0x20ba20, 0x104400, 64 * 1024, 1024)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024)
+ FLAGS(USE_FSR | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "mt25qu512a", INFO6(0x20bb20, 0x104400, 64 * 1024, 1024)
+ FLAGS(USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 |
+ NO_CHIP_ERASE | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048)
+ FLAGS(NO_CHIP_ERASE | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096)
+ FLAGS(NO_CHIP_ERASE | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+ { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096)
+ FLAGS(NO_CHIP_ERASE | USE_FSR)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
- { "mt25ql256a", INFO6(0x20ba19, 0x104400, 64 * 1024, 512,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K |
- USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ) },
- { "mt25qu256a", INFO6(0x20bb19, 0x104400, 64 * 1024, 512,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
- { "mt25ql512a", INFO6(0x20ba20, 0x104400, 64 * 1024, 1024,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
- { "mt25qu512a", INFO6(0x20bb20, 0x104400, 64 * 1024, 1024,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
- { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 |
- NO_CHIP_ERASE) },
- { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- NO_CHIP_ERASE) },
- { "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- NO_CHIP_ERASE) },
- { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
-
- { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) },
- { "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) },
- { "m25p20", INFO(0x202012, 0, 64 * 1024, 4, 0) },
- { "m25p40", INFO(0x202013, 0, 64 * 1024, 8, 0) },
- { "m25p80", INFO(0x202014, 0, 64 * 1024, 16, 0) },
- { "m25p16", INFO(0x202015, 0, 64 * 1024, 32, 0) },
- { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) },
- { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
- { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },
-
- { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) },
- { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) },
- { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4, 0) },
- { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8, 0) },
- { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16, 0) },
- { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32, 0) },
- { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64, 0) },
- { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128, 0) },
- { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64, 0) },
-
- { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) },
- { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) },
- { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) },
-
- { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4, 0) },
- { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) },
- { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) },
-
- { "m25px16", INFO(0x207115, 0, 64 * 1024, 32, SECT_4K) },
- { "m25px32", INFO(0x207116, 0, 64 * 1024, 64, SECT_4K) },
- { "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64, SECT_4K) },
- { "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64, SECT_4K) },
- { "m25px64", INFO(0x207117, 0, 64 * 1024, 128, 0) },
- { "m25px80", INFO(0x207114, 0, 64 * 1024, 16, 0) },
+
+ { "m25p05", INFO(0x202010, 0, 32 * 1024, 2) },
+ { "m25p10", INFO(0x202011, 0, 32 * 1024, 4) },
+ { "m25p20", INFO(0x202012, 0, 64 * 1024, 4) },
+ { "m25p40", INFO(0x202013, 0, 64 * 1024, 8) },
+ { "m25p80", INFO(0x202014, 0, 64 * 1024, 16) },
+ { "m25p16", INFO(0x202015, 0, 64 * 1024, 32) },
+ { "m25p32", INFO(0x202016, 0, 64 * 1024, 64) },
+ { "m25p64", INFO(0x202017, 0, 64 * 1024, 128) },
+ { "m25p128", INFO(0x202018, 0, 256 * 1024, 64) },
+
+ { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2) },
+ { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4) },
+ { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4) },
+ { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8) },
+ { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16) },
+ { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32) },
+ { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64) },
+ { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128) },
+ { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64) },
+
+ { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2) },
+ { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16) },
+ { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32) },
+
+ { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4) },
+ { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16) },
+ { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K) },
+
+ { "m25px16", INFO(0x207115, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "m25px32", INFO(0x207116, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "m25px64", INFO(0x207117, 0, 64 * 1024, 128) },
+ { "m25px80", INFO(0x207114, 0, 64 * 1024, 16) },
};
/**
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index a3ea0135f7b1..1282a759cd75 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -198,81 +198,90 @@ static const struct flash_info spansion_parts[] = {
/* Spansion/Cypress -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
*/
- { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | USE_CLSR) },
- { "s25fs128s1", INFO6(0x012018, 0x4d0181, 64 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
- .fixups = &s25fs_s_fixups, },
- { "s25fs256s0", INFO6(0x010219, 0x4d0081, 256 * 1024, 128,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
- .fixups = &s25fs_s_fixups, },
- { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
- { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
- { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
- { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) },
- { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) },
- { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) },
- { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) },
- { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) },
- { "s25fl004k", INFO(0xef4013, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) },
- { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
- { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "s25fl208k", INFO(0x014014, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES) },
- { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES) },
- { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES) },
- { "cy15x104q", INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1,
- SPI_NOR_NO_ERASE) },
- { "s28hs512t", INFO(0x345b1a, 0, 256 * 1024, 256,
- SECT_4K | SPI_NOR_OCTAL_DTR_READ |
- SPI_NOR_OCTAL_DTR_PP)
- .fixups = &s28hs512t_fixups,
+ { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fs128s1", INFO6(0x012018, 0x4d0181, 64 * 1024, 256)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ .fixups = &s25fs_s_fixups, },
+ { "s25fs256s0", INFO6(0x010219, 0x4d0081, 256 * 1024, 128)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ .fixups = &s25fs_s_fixups, },
+ { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64) },
+ { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256) },
+ { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256)
+ FLAGS(USE_CLSR)
+ NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8) },
+ { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16) },
+ { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32) },
+ { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64) },
+ { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128) },
+ { "s25fl004k", INFO(0xef4013, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "s25fl208k", INFO(0x014014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "cy15x104q", INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1)
+ FLAGS(SPI_NOR_NO_ERASE) },
+ { "s28hs512t", INFO(0x345b1a, 0, 256 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+ SPI_NOR_OCTAL_DTR_PP)
+ .fixups = &s28hs512t_fixups,
},
};
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 8f1ebb8fd05f..ac150f275237 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -60,55 +60,60 @@ static const struct spi_nor_fixups sst26vf_fixups = {
static const struct flash_info sst_parts[] = {
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
- { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_4BIT_BP | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE) },
- { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP |
+ SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4, SECT_4K | SPI_NOR_HAS_LOCK) },
- { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_HAS_LOCK) },
- { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4)
+ FLAGS(SPI_NOR_HAS_LOCK)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8)
+ FLAGS(SPI_NOR_HAS_LOCK)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_HAS_LOCK |
- SPI_NOR_SWP_IS_VOLATILE)
+ { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K)
MFR_FLAGS(SST_WRITE) },
- { "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ |
+ { "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
- { "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ { "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
.fixups = &sst26vf_fixups },
};
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index dd4be0f78e67..421509406368 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -34,74 +34,100 @@ static struct spi_nor_fixups w25q256_fixups = {
static const struct flash_info winbond_parts[] = {
/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
- { "w25x05", INFO(0xef3010, 0, 64 * 1024, 1, SECT_4K) },
- { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) },
- { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) },
- { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
- { "w25q16dw", INFO(0xef6015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
- { "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK |
- SPI_NOR_HAS_TB) },
- { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25q20ew", INFO(0xef6012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
- { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- OTP_INFO(256, 3, 0x1000, 0x1000)
- },
-
- { "w25q32jv", INFO(0xef7016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- { "w25q32jwm", INFO(0xef8016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- OTP_INFO(256, 3, 0x1000, 0x1000) },
- { "w25q64jwm", INFO(0xef8017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25q128jwm", INFO(0xef8018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25q256jwm", INFO(0xef8019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
- { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25q64jvm", INFO(0xef7017, 0, 64 * 1024, 128, SECT_4K) },
- { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
- { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
- .fixups = &w25q256_fixups },
- { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
- SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
- { "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "w25x05", INFO(0xef3010, 0, 64 * 1024, 1)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q16dw", INFO(0xef6015, 0, 64 * 1024, 32)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024, 32)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q20ew", INFO(0xef6012, 0, 64 * 1024, 4)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ OTP_INFO(256, 3, 0x1000, 0x1000) },
+ { "w25q32jv", INFO(0xef7016, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q32jwm", INFO(0xef8016, 0, 64 * 1024, 64)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ OTP_INFO(256, 3, 0x1000, 0x1000) },
+ { "w25q64jwm", INFO(0xef8017, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q128jwm", INFO(0xef8018, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q256jwm", INFO(0xef8019, 0, 64 * 1024, 512)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q64jvm", INFO(0xef7017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K) },
+ { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ .fixups = &w25q256_fixups },
+ { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ |
+ SPI_NOR_DUAL_READ) },
+ { "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
};
/**
diff --git a/drivers/mtd/spi-nor/xmc.c b/drivers/mtd/spi-nor/xmc.c
index 2c7773b68993..2992af03cb0a 100644
--- a/drivers/mtd/spi-nor/xmc.c
+++ b/drivers/mtd/spi-nor/xmc.c
@@ -10,10 +10,12 @@
static const struct flash_info xmc_parts[] = {
/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
- { "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
};
const struct spi_nor_manufacturer spi_nor_xmc = {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 06/13] mtd: spi-nor: Introduce spi_nor_init_flags()
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
Used to initialize the NOR flags for settings that are not defined
in the JESD216 SFDP standard, thus can not be retrieved when parsing
SFDP.
This moves the setting of SNOR_F_READY_XSR_RDY and SNOR_F_HAS_LOCK
late in the init call, without any functional change expected.
The rest of the flags were already set after the spi_nor_init_params().
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
---
v4: rename method to spi_nor_init_flags
drivers/mtd/spi-nor/core.c | 89 ++++++++++++++++++++++----------------
1 file changed, 51 insertions(+), 38 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index a2d09b722fed..14f92d105878 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2643,6 +2643,55 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
}
+/**
+ * spi_nor_init_flags() - Initialize NOR flags for settings that are not defined
+ * in the JESD216 SFDP standard, thus can not be retrieved when parsing SFDP.
+ * @nor: pointer to a 'struct spi_nor'
+ */
+static void spi_nor_init_flags(struct spi_nor *nor)
+{
+ struct device_node *np = spi_nor_get_flash_node(nor);
+ const u16 flags = nor->info->flags;
+
+ if (of_property_read_bool(np, "broken-flash-reset"))
+ nor->flags |= SNOR_F_BROKEN_RESET;
+
+ if (flags & SPI_NOR_SWP_IS_VOLATILE)
+ nor->flags |= SNOR_F_SWP_IS_VOLATILE;
+
+ if (flags & SPI_NOR_HAS_LOCK)
+ nor->flags |= SNOR_F_HAS_LOCK;
+
+ if (flags & SPI_NOR_HAS_TB) {
+ nor->flags |= SNOR_F_HAS_SR_TB;
+ if (flags & SPI_NOR_TB_SR_BIT6)
+ nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
+ }
+
+ if (flags & SPI_NOR_4BIT_BP) {
+ nor->flags |= SNOR_F_HAS_4BIT_BP;
+ if (flags & SPI_NOR_BP3_SR_BIT6)
+ nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
+ }
+
+ if (flags & NO_CHIP_ERASE)
+ nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
+
+ if (flags & USE_CLSR)
+ nor->flags |= SNOR_F_USE_CLSR;
+
+ if (flags & USE_FSR)
+ nor->flags |= SNOR_F_USE_FSR;
+
+ /*
+ * Make sure the XSR_RDY flag is set before calling
+ * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
+ * with Atmel SPI NOR.
+ */
+ if (flags & SPI_NOR_XSR_RDY)
+ nor->flags |= SNOR_F_READY_XSR_RDY;
+}
+
/**
* spi_nor_late_init_params() - Late initialization of default flash parameters.
* @nor: pointer to a 'struct spi_nor'
@@ -2660,6 +2709,8 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
if (nor->info->fixups && nor->info->fixups->late_init)
nor->info->fixups->late_init(nor);
+ spi_nor_init_flags(nor);
+
/*
* NOR protection support. When locking_ops are not provided, we pick
* the default ones.
@@ -3094,10 +3145,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
const struct flash_info *info;
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
- struct device_node *np = spi_nor_get_flash_node(nor);
int ret;
int i;
- u16 flags;
u8 fixup_flags;
ret = spi_nor_check(nor);
@@ -3128,52 +3177,16 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
return PTR_ERR(info);
nor->info = info;
- flags = info->flags;
spi_nor_debugfs_init(nor, info);
mutex_init(&nor->lock);
- /*
- * Make sure the XSR_RDY flag is set before calling
- * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
- * with Atmel SPI NOR.
- */
- if (flags & SPI_NOR_XSR_RDY)
- nor->flags |= SNOR_F_READY_XSR_RDY;
-
- if (flags & SPI_NOR_HAS_LOCK)
- nor->flags |= SNOR_F_HAS_LOCK;
-
/* Init flash parameters based on flash_info struct and SFDP */
ret = spi_nor_init_params(nor);
if (ret)
return ret;
- if (flags & USE_FSR)
- nor->flags |= SNOR_F_USE_FSR;
- if (flags & SPI_NOR_HAS_TB) {
- nor->flags |= SNOR_F_HAS_SR_TB;
- if (flags & SPI_NOR_TB_SR_BIT6)
- nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
- }
-
- if (flags & NO_CHIP_ERASE)
- nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
- if (flags & USE_CLSR)
- nor->flags |= SNOR_F_USE_CLSR;
- if (flags & SPI_NOR_SWP_IS_VOLATILE)
- nor->flags |= SNOR_F_SWP_IS_VOLATILE;
-
- if (flags & SPI_NOR_4BIT_BP) {
- nor->flags |= SNOR_F_HAS_4BIT_BP;
- if (flags & SPI_NOR_BP3_SR_BIT6)
- nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
- }
-
- if (of_property_read_bool(np, "broken-flash-reset"))
- nor->flags |= SNOR_F_BROKEN_RESET;
-
/*
* Configure the SPI memory:
* - select op codes for (Fast) Read, Page Program and Sector Erase.
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 06/13] mtd: spi-nor: Introduce spi_nor_init_flags()
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
Used to initialize the NOR flags for settings that are not defined
in the JESD216 SFDP standard, thus can not be retrieved when parsing
SFDP.
This moves the setting of SNOR_F_READY_XSR_RDY and SNOR_F_HAS_LOCK
late in the init call, without any functional change expected.
The rest of the flags were already set after the spi_nor_init_params().
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
---
v4: rename method to spi_nor_init_flags
drivers/mtd/spi-nor/core.c | 89 ++++++++++++++++++++++----------------
1 file changed, 51 insertions(+), 38 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index a2d09b722fed..14f92d105878 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2643,6 +2643,55 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
}
+/**
+ * spi_nor_init_flags() - Initialize NOR flags for settings that are not defined
+ * in the JESD216 SFDP standard, thus can not be retrieved when parsing SFDP.
+ * @nor: pointer to a 'struct spi_nor'
+ */
+static void spi_nor_init_flags(struct spi_nor *nor)
+{
+ struct device_node *np = spi_nor_get_flash_node(nor);
+ const u16 flags = nor->info->flags;
+
+ if (of_property_read_bool(np, "broken-flash-reset"))
+ nor->flags |= SNOR_F_BROKEN_RESET;
+
+ if (flags & SPI_NOR_SWP_IS_VOLATILE)
+ nor->flags |= SNOR_F_SWP_IS_VOLATILE;
+
+ if (flags & SPI_NOR_HAS_LOCK)
+ nor->flags |= SNOR_F_HAS_LOCK;
+
+ if (flags & SPI_NOR_HAS_TB) {
+ nor->flags |= SNOR_F_HAS_SR_TB;
+ if (flags & SPI_NOR_TB_SR_BIT6)
+ nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
+ }
+
+ if (flags & SPI_NOR_4BIT_BP) {
+ nor->flags |= SNOR_F_HAS_4BIT_BP;
+ if (flags & SPI_NOR_BP3_SR_BIT6)
+ nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
+ }
+
+ if (flags & NO_CHIP_ERASE)
+ nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
+
+ if (flags & USE_CLSR)
+ nor->flags |= SNOR_F_USE_CLSR;
+
+ if (flags & USE_FSR)
+ nor->flags |= SNOR_F_USE_FSR;
+
+ /*
+ * Make sure the XSR_RDY flag is set before calling
+ * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
+ * with Atmel SPI NOR.
+ */
+ if (flags & SPI_NOR_XSR_RDY)
+ nor->flags |= SNOR_F_READY_XSR_RDY;
+}
+
/**
* spi_nor_late_init_params() - Late initialization of default flash parameters.
* @nor: pointer to a 'struct spi_nor'
@@ -2660,6 +2709,8 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
if (nor->info->fixups && nor->info->fixups->late_init)
nor->info->fixups->late_init(nor);
+ spi_nor_init_flags(nor);
+
/*
* NOR protection support. When locking_ops are not provided, we pick
* the default ones.
@@ -3094,10 +3145,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
const struct flash_info *info;
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
- struct device_node *np = spi_nor_get_flash_node(nor);
int ret;
int i;
- u16 flags;
u8 fixup_flags;
ret = spi_nor_check(nor);
@@ -3128,52 +3177,16 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
return PTR_ERR(info);
nor->info = info;
- flags = info->flags;
spi_nor_debugfs_init(nor, info);
mutex_init(&nor->lock);
- /*
- * Make sure the XSR_RDY flag is set before calling
- * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
- * with Atmel SPI NOR.
- */
- if (flags & SPI_NOR_XSR_RDY)
- nor->flags |= SNOR_F_READY_XSR_RDY;
-
- if (flags & SPI_NOR_HAS_LOCK)
- nor->flags |= SNOR_F_HAS_LOCK;
-
/* Init flash parameters based on flash_info struct and SFDP */
ret = spi_nor_init_params(nor);
if (ret)
return ret;
- if (flags & USE_FSR)
- nor->flags |= SNOR_F_USE_FSR;
- if (flags & SPI_NOR_HAS_TB) {
- nor->flags |= SNOR_F_HAS_SR_TB;
- if (flags & SPI_NOR_TB_SR_BIT6)
- nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
- }
-
- if (flags & NO_CHIP_ERASE)
- nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
- if (flags & USE_CLSR)
- nor->flags |= SNOR_F_USE_CLSR;
- if (flags & SPI_NOR_SWP_IS_VOLATILE)
- nor->flags |= SNOR_F_SWP_IS_VOLATILE;
-
- if (flags & SPI_NOR_4BIT_BP) {
- nor->flags |= SNOR_F_HAS_4BIT_BP;
- if (flags & SPI_NOR_BP3_SR_BIT6)
- nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
- }
-
- if (of_property_read_bool(np, "broken-flash-reset"))
- nor->flags |= SNOR_F_BROKEN_RESET;
-
/*
* Configure the SPI memory:
* - select op codes for (Fast) Read, Page Program and Sector Erase.
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 07/13] mtd: spi-nor: Introduce spi_nor_init_fixup_flags()
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
Group NOR flags initialization. Introduce a dedicated function for
setting the fixup_flags and emphasise when those flash_info flags
should be set: when the SNOR_F_4B_OPCODES/SNOR_F_IO_MODE_EN_VOLATILE
setttings can not be discovered by SFDP for this particular flash
because the SFDP table that indicates this support is not defined
in the flash.
In case the table for his support is defined but has wrong values,
one should instead use a post_sfdp() hook to set the SNOR_F equivalent
flag.
No functional change intended in this patch.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
---
v4: no changes
drivers/mtd/spi-nor/core.c | 28 ++++++++++++++++++++--------
1 file changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 14f92d105878..43668978ca5e 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2692,6 +2692,25 @@ static void spi_nor_init_flags(struct spi_nor *nor)
nor->flags |= SNOR_F_READY_XSR_RDY;
}
+/**
+ * spi_nor_init_fixup_flags() - Initialize NOR flags for settings that can not
+ * be discovered by SFDP for this particular flash because the SFDP table that
+ * indicates this support is not defined in the flash. In case the table for
+ * this support is defined but has wrong values, one should instead use a
+ * post_sfdp() hook to set the SNOR_F equivalent flag.
+ * @nor: pointer to a 'struct spi_nor'
+ */
+static void spi_nor_init_fixup_flags(struct spi_nor *nor)
+{
+ const u8 fixup_flags = nor->info->fixup_flags;
+
+ if (fixup_flags & SPI_NOR_4B_OPCODES)
+ nor->flags |= SNOR_F_4B_OPCODES;
+
+ if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
+ nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
+}
+
/**
* spi_nor_late_init_params() - Late initialization of default flash parameters.
* @nor: pointer to a 'struct spi_nor'
@@ -2710,6 +2729,7 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
nor->info->fixups->late_init(nor);
spi_nor_init_flags(nor);
+ spi_nor_init_fixup_flags(nor);
/*
* NOR protection support. When locking_ops are not provided, we pick
@@ -3147,7 +3167,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
struct mtd_info *mtd = &nor->mtd;
int ret;
int i;
- u8 fixup_flags;
ret = spi_nor_check(nor);
if (ret)
@@ -3197,13 +3216,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (ret)
return ret;
- fixup_flags = info->fixup_flags;
- if (fixup_flags & SPI_NOR_4B_OPCODES)
- nor->flags |= SNOR_F_4B_OPCODES;
-
- if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
- nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
-
ret = spi_nor_set_addr_width(nor);
if (ret)
return ret;
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 07/13] mtd: spi-nor: Introduce spi_nor_init_fixup_flags()
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
Group NOR flags initialization. Introduce a dedicated function for
setting the fixup_flags and emphasise when those flash_info flags
should be set: when the SNOR_F_4B_OPCODES/SNOR_F_IO_MODE_EN_VOLATILE
setttings can not be discovered by SFDP for this particular flash
because the SFDP table that indicates this support is not defined
in the flash.
In case the table for his support is defined but has wrong values,
one should instead use a post_sfdp() hook to set the SNOR_F equivalent
flag.
No functional change intended in this patch.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
---
v4: no changes
drivers/mtd/spi-nor/core.c | 28 ++++++++++++++++++++--------
1 file changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 14f92d105878..43668978ca5e 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2692,6 +2692,25 @@ static void spi_nor_init_flags(struct spi_nor *nor)
nor->flags |= SNOR_F_READY_XSR_RDY;
}
+/**
+ * spi_nor_init_fixup_flags() - Initialize NOR flags for settings that can not
+ * be discovered by SFDP for this particular flash because the SFDP table that
+ * indicates this support is not defined in the flash. In case the table for
+ * this support is defined but has wrong values, one should instead use a
+ * post_sfdp() hook to set the SNOR_F equivalent flag.
+ * @nor: pointer to a 'struct spi_nor'
+ */
+static void spi_nor_init_fixup_flags(struct spi_nor *nor)
+{
+ const u8 fixup_flags = nor->info->fixup_flags;
+
+ if (fixup_flags & SPI_NOR_4B_OPCODES)
+ nor->flags |= SNOR_F_4B_OPCODES;
+
+ if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
+ nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
+}
+
/**
* spi_nor_late_init_params() - Late initialization of default flash parameters.
* @nor: pointer to a 'struct spi_nor'
@@ -2710,6 +2729,7 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
nor->info->fixups->late_init(nor);
spi_nor_init_flags(nor);
+ spi_nor_init_fixup_flags(nor);
/*
* NOR protection support. When locking_ops are not provided, we pick
@@ -3147,7 +3167,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
struct mtd_info *mtd = &nor->mtd;
int ret;
int i;
- u8 fixup_flags;
ret = spi_nor_check(nor);
if (ret)
@@ -3197,13 +3216,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (ret)
return ret;
- fixup_flags = info->fixup_flags;
- if (fixup_flags & SPI_NOR_4B_OPCODES)
- nor->flags |= SNOR_F_4B_OPCODES;
-
- if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
- nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
-
ret = spi_nor_set_addr_width(nor);
if (ret)
return ret;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 08/13] mtd: spi-nor: core: Init all flash parameters based on SFDP where possible
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
New flash additions that support SFDP should be declared with
PARSE_SFDP and with all the other flags that are not SFDP
discoverable.
Keep the old way of initializing the flash, until all the flashes
are converted to use either PARSE_SFDP or SPI_NOR_SKIP_SFDP.
Flashes that declare PARSE_SFDP do not have a roll-back mechanism
because if spi_nor_parse_sfdp() returns an error it means that either
BFPT is not supported, thus SFDP is not supported and the user didn't
correctly declared the flash_info entry, or some memalloc failed.
Either way we should return an error. The rest of the SFDP tables are
optional, if one of the optional SFDP tables fails, we just continue.
We would like to get rid of the default_init() hook, so the
spi_nor_manufacturer_init_params() is not called in the new sequnce
of flash initialization that is based solely on SFDP.
Split spi_nor_info_init_params() in spi_nor_init_default_params()
and spi_nor_no_sfdp_init_params(). spi_nor_init_default_params() is
called for all the flashes regardless if they support SFDP or not.
spi_nor_no_sfdp_init_params() is called just for the flashes that
do not define SFDP and initializes parameters and setting solely
based on flash_info data.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4:
- remove roll-back mechanism for flashes that use PARSE_SFDP.
- rename methods
drivers/mtd/spi-nor/core.c | 194 ++++++++++++++++++++++---------------
1 file changed, 116 insertions(+), 78 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 43668978ca5e..4ff386719674 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2509,74 +2509,21 @@ static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
}
/**
- * spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings
- * based on JESD216 SFDP standard.
+ * spi_nor_no_sfdp_init_params() - Initialize the flash's parameters and
+ * settings based on nor->info->sfdp_flags. This method should be called only by
+ * flashes that do not define SFDP tables. If the flash supports SFDP but the
+ * information is wrong and the settings from this function can not be retrieved
+ * by parsing SFDP, one should instead use the fixup hooks and update the wrong
+ * bits.
* @nor: pointer to a 'struct spi_nor'.
- *
- * The method has a roll-back mechanism: in case the SFDP parsing fails, the
- * legacy flash parameters and settings will be restored.
*/
-static void spi_nor_sfdp_init_params(struct spi_nor *nor)
-{
- struct spi_nor_flash_parameter sfdp_params;
-
- memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
-
- if (spi_nor_parse_sfdp(nor)) {
- memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
- nor->addr_width = 0;
- nor->flags &= ~SNOR_F_4B_OPCODES;
- }
-}
-
-/**
- * spi_nor_info_init_params() - Initialize the flash's parameters and settings
- * based on nor->info data.
- * @nor: pointer to a 'struct spi_nor'.
- */
-static void spi_nor_info_init_params(struct spi_nor *nor)
+static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
{
struct spi_nor_flash_parameter *params = nor->params;
struct spi_nor_erase_map *map = ¶ms->erase_map;
- const struct flash_info *info = nor->info;
- struct device_node *np = spi_nor_get_flash_node(nor);
- const u8 no_sfdp_flags = info->no_sfdp_flags;
+ const u8 no_sfdp_flags = nor->info->no_sfdp_flags;
u8 i, erase_mask;
- /* Initialize default flash parameters and settings. */
- params->quad_enable = spi_nor_sr2_bit1_quad_enable;
- params->set_4byte_addr_mode = spansion_set_4byte_addr_mode;
- params->setup = spi_nor_default_setup;
- params->otp.org = &info->otp_org;
-
- /* Default to 16-bit Write Status (01h) Command */
- nor->flags |= SNOR_F_HAS_16BIT_SR;
-
- /* Set SPI NOR sizes. */
- params->writesize = 1;
- params->size = (u64)info->sector_size * info->n_sectors;
- params->page_size = info->page_size;
-
- if (!(info->flags & SPI_NOR_NO_FR)) {
- /* Default to Fast Read for DT and non-DT platform devices. */
- params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
-
- /* Mask out Fast Read if not requested at DT instantiation. */
- if (np && !of_property_read_bool(np, "m25p,fast-read"))
- params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
- }
-
- /* (Fast) Read settings. */
- params->hwcaps.mask |= SNOR_HWCAPS_READ;
- spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ],
- 0, 0, SPINOR_OP_READ,
- SNOR_PROTO_1_1_1);
-
- if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
- spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST],
- 0, 8, SPINOR_OP_READ_FAST,
- SNOR_PROTO_1_1_1);
-
if (no_sfdp_flags & SPI_NOR_DUAL_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2],
@@ -2605,11 +2552,6 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
SNOR_PROTO_8_8_8_DTR);
}
- /* Page Program settings. */
- params->hwcaps.mask |= SNOR_HWCAPS_PP;
- spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP],
- SPINOR_OP_PP, SNOR_PROTO_1_1_1);
-
if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_PP) {
params->hwcaps.mask |= SNOR_HWCAPS_PP_8_8_8_DTR;
/*
@@ -2638,7 +2580,7 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
i++;
}
erase_mask |= BIT(i);
- spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
+ spi_nor_set_erase_type(&map->erase_type[i], nor->info->sector_size,
SPINOR_OP_SE);
spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
}
@@ -2739,6 +2681,98 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
spi_nor_init_default_locking_ops(nor);
}
+/**
+ * spi_nor_sfdp_init_params_deprecated() - Deprecated way of initializing flash
+ * parameters and settings based on JESD216 SFDP standard.
+ * @nor: pointer to a 'struct spi_nor'.
+ *
+ * The method has a roll-back mechanism: in case the SFDP parsing fails, the
+ * legacy flash parameters and settings will be restored.
+ */
+static void spi_nor_sfdp_init_params_deprecated(struct spi_nor *nor)
+{
+ struct spi_nor_flash_parameter sfdp_params;
+
+ memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
+
+ if (spi_nor_parse_sfdp(nor)) {
+ memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
+ nor->addr_width = 0;
+ nor->flags &= ~SNOR_F_4B_OPCODES;
+ }
+}
+
+/**
+ * spi_nor_init_params_deprecated() - Deprecated way of initializing flash
+ * parameters and settings.
+ * @nor: pointer to a 'struct spi_nor'.
+ *
+ * The method assumes that flash doesn't support SFDP so it initializes flash
+ * parameters in spi_nor_no_sfdp_init_params() which later on can be overwritten
+ * when parsing SFDP, if supported.
+ */
+static void spi_nor_init_params_deprecated(struct spi_nor *nor)
+{
+ spi_nor_no_sfdp_init_params(nor);
+
+ spi_nor_manufacturer_init_params(nor);
+
+ if ((SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_OCTAL_READ |
+ SPI_NOR_OCTAL_DTR_READ) &&
+ !(nor->info->no_sfdp_flags & SPI_NOR_SKIP_SFDP))
+ spi_nor_sfdp_init_params_deprecated(nor);
+}
+
+/**
+ * spi_nor_init_default_params() - Default initialization of flash parameters
+ * and settings. Done for all flashes, regardless is they define SFDP tables
+ * or not.
+ * @nor: pointer to a 'struct spi_nor'.
+ */
+static void spi_nor_init_default_params(struct spi_nor *nor)
+{
+ struct spi_nor_flash_parameter *params = nor->params;
+ const struct flash_info *info = nor->info;
+ struct device_node *np = spi_nor_get_flash_node(nor);
+
+ params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+ params->set_4byte_addr_mode = spansion_set_4byte_addr_mode;
+ params->setup = spi_nor_default_setup;
+ params->otp.org = &info->otp_org;
+
+ /* Default to 16-bit Write Status (01h) Command */
+ nor->flags |= SNOR_F_HAS_16BIT_SR;
+
+ /* Set SPI NOR sizes. */
+ params->writesize = 1;
+ params->size = (u64)info->sector_size * info->n_sectors;
+ params->page_size = info->page_size;
+
+ if (!(info->flags & SPI_NOR_NO_FR)) {
+ /* Default to Fast Read for DT and non-DT platform devices. */
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
+
+ /* Mask out Fast Read if not requested at DT instantiation. */
+ if (np && !of_property_read_bool(np, "m25p,fast-read"))
+ params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
+ }
+
+ /* (Fast) Read settings. */
+ params->hwcaps.mask |= SNOR_HWCAPS_READ;
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ],
+ 0, 0, SPINOR_OP_READ,
+ SNOR_PROTO_1_1_1);
+
+ if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST],
+ 0, 8, SPINOR_OP_READ_FAST,
+ SNOR_PROTO_1_1_1);
+ /* Page Program settings. */
+ params->hwcaps.mask |= SNOR_HWCAPS_PP;
+ spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP],
+ SPINOR_OP_PP, SNOR_PROTO_1_1_1);
+}
+
/**
* spi_nor_init_params() - Initialize the flash's parameters and settings.
* @nor: pointer to a 'struct spi_nor'.
@@ -2759,7 +2793,7 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
* which can be overwritten by:
* 3/ SFDP flash parameters initialization. JESD216 SFDP is a standard and
* should be more accurate that the above.
- * spi_nor_sfdp_init_params()
+ * spi_nor_parse_sfdp() or spi_nor_sfdp_init_params_deprecated()
*
* Please note that there is a ->post_bfpt() fixup hook that can overwrite
* the flash parameters and settings immediately after parsing the Basic
@@ -2773,24 +2807,28 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
* parameters that are not declared in the JESD216 SFDP standard, or where SFDP
* tables are not defined at all.
* spi_nor_late_init_params()
+ *
+ * Return: 0 on success, -errno otherwise.
*/
static int spi_nor_init_params(struct spi_nor *nor)
{
+ int ret;
+
nor->params = devm_kzalloc(nor->dev, sizeof(*nor->params), GFP_KERNEL);
if (!nor->params)
return -ENOMEM;
- spi_nor_info_init_params(nor);
-
- spi_nor_manufacturer_init_params(nor);
+ spi_nor_init_default_params(nor);
- if ((nor->info->parse_sfdp ||
- (nor->info->no_sfdp_flags & (SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ |
- SPI_NOR_OCTAL_READ |
- SPI_NOR_OCTAL_DTR_READ))) &&
- !(nor->info->no_sfdp_flags & SPI_NOR_SKIP_SFDP))
- spi_nor_sfdp_init_params(nor);
+ if (nor->info->parse_sfdp) {
+ ret = spi_nor_parse_sfdp(nor);
+ if (ret) {
+ dev_err(nor->dev, "BFPT parsing failed. Please consider using SPI_NOR_SKIP_SFDP when declaring the flash\n");
+ return ret;
+ }
+ } else {
+ spi_nor_init_params_deprecated(nor);
+ }
spi_nor_late_init_params(nor);
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 08/13] mtd: spi-nor: core: Init all flash parameters based on SFDP where possible
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
New flash additions that support SFDP should be declared with
PARSE_SFDP and with all the other flags that are not SFDP
discoverable.
Keep the old way of initializing the flash, until all the flashes
are converted to use either PARSE_SFDP or SPI_NOR_SKIP_SFDP.
Flashes that declare PARSE_SFDP do not have a roll-back mechanism
because if spi_nor_parse_sfdp() returns an error it means that either
BFPT is not supported, thus SFDP is not supported and the user didn't
correctly declared the flash_info entry, or some memalloc failed.
Either way we should return an error. The rest of the SFDP tables are
optional, if one of the optional SFDP tables fails, we just continue.
We would like to get rid of the default_init() hook, so the
spi_nor_manufacturer_init_params() is not called in the new sequnce
of flash initialization that is based solely on SFDP.
Split spi_nor_info_init_params() in spi_nor_init_default_params()
and spi_nor_no_sfdp_init_params(). spi_nor_init_default_params() is
called for all the flashes regardless if they support SFDP or not.
spi_nor_no_sfdp_init_params() is called just for the flashes that
do not define SFDP and initializes parameters and setting solely
based on flash_info data.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4:
- remove roll-back mechanism for flashes that use PARSE_SFDP.
- rename methods
drivers/mtd/spi-nor/core.c | 194 ++++++++++++++++++++++---------------
1 file changed, 116 insertions(+), 78 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 43668978ca5e..4ff386719674 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2509,74 +2509,21 @@ static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
}
/**
- * spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings
- * based on JESD216 SFDP standard.
+ * spi_nor_no_sfdp_init_params() - Initialize the flash's parameters and
+ * settings based on nor->info->sfdp_flags. This method should be called only by
+ * flashes that do not define SFDP tables. If the flash supports SFDP but the
+ * information is wrong and the settings from this function can not be retrieved
+ * by parsing SFDP, one should instead use the fixup hooks and update the wrong
+ * bits.
* @nor: pointer to a 'struct spi_nor'.
- *
- * The method has a roll-back mechanism: in case the SFDP parsing fails, the
- * legacy flash parameters and settings will be restored.
*/
-static void spi_nor_sfdp_init_params(struct spi_nor *nor)
-{
- struct spi_nor_flash_parameter sfdp_params;
-
- memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
-
- if (spi_nor_parse_sfdp(nor)) {
- memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
- nor->addr_width = 0;
- nor->flags &= ~SNOR_F_4B_OPCODES;
- }
-}
-
-/**
- * spi_nor_info_init_params() - Initialize the flash's parameters and settings
- * based on nor->info data.
- * @nor: pointer to a 'struct spi_nor'.
- */
-static void spi_nor_info_init_params(struct spi_nor *nor)
+static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
{
struct spi_nor_flash_parameter *params = nor->params;
struct spi_nor_erase_map *map = ¶ms->erase_map;
- const struct flash_info *info = nor->info;
- struct device_node *np = spi_nor_get_flash_node(nor);
- const u8 no_sfdp_flags = info->no_sfdp_flags;
+ const u8 no_sfdp_flags = nor->info->no_sfdp_flags;
u8 i, erase_mask;
- /* Initialize default flash parameters and settings. */
- params->quad_enable = spi_nor_sr2_bit1_quad_enable;
- params->set_4byte_addr_mode = spansion_set_4byte_addr_mode;
- params->setup = spi_nor_default_setup;
- params->otp.org = &info->otp_org;
-
- /* Default to 16-bit Write Status (01h) Command */
- nor->flags |= SNOR_F_HAS_16BIT_SR;
-
- /* Set SPI NOR sizes. */
- params->writesize = 1;
- params->size = (u64)info->sector_size * info->n_sectors;
- params->page_size = info->page_size;
-
- if (!(info->flags & SPI_NOR_NO_FR)) {
- /* Default to Fast Read for DT and non-DT platform devices. */
- params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
-
- /* Mask out Fast Read if not requested at DT instantiation. */
- if (np && !of_property_read_bool(np, "m25p,fast-read"))
- params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
- }
-
- /* (Fast) Read settings. */
- params->hwcaps.mask |= SNOR_HWCAPS_READ;
- spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ],
- 0, 0, SPINOR_OP_READ,
- SNOR_PROTO_1_1_1);
-
- if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
- spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST],
- 0, 8, SPINOR_OP_READ_FAST,
- SNOR_PROTO_1_1_1);
-
if (no_sfdp_flags & SPI_NOR_DUAL_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2],
@@ -2605,11 +2552,6 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
SNOR_PROTO_8_8_8_DTR);
}
- /* Page Program settings. */
- params->hwcaps.mask |= SNOR_HWCAPS_PP;
- spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP],
- SPINOR_OP_PP, SNOR_PROTO_1_1_1);
-
if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_PP) {
params->hwcaps.mask |= SNOR_HWCAPS_PP_8_8_8_DTR;
/*
@@ -2638,7 +2580,7 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
i++;
}
erase_mask |= BIT(i);
- spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
+ spi_nor_set_erase_type(&map->erase_type[i], nor->info->sector_size,
SPINOR_OP_SE);
spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
}
@@ -2739,6 +2681,98 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
spi_nor_init_default_locking_ops(nor);
}
+/**
+ * spi_nor_sfdp_init_params_deprecated() - Deprecated way of initializing flash
+ * parameters and settings based on JESD216 SFDP standard.
+ * @nor: pointer to a 'struct spi_nor'.
+ *
+ * The method has a roll-back mechanism: in case the SFDP parsing fails, the
+ * legacy flash parameters and settings will be restored.
+ */
+static void spi_nor_sfdp_init_params_deprecated(struct spi_nor *nor)
+{
+ struct spi_nor_flash_parameter sfdp_params;
+
+ memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
+
+ if (spi_nor_parse_sfdp(nor)) {
+ memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
+ nor->addr_width = 0;
+ nor->flags &= ~SNOR_F_4B_OPCODES;
+ }
+}
+
+/**
+ * spi_nor_init_params_deprecated() - Deprecated way of initializing flash
+ * parameters and settings.
+ * @nor: pointer to a 'struct spi_nor'.
+ *
+ * The method assumes that flash doesn't support SFDP so it initializes flash
+ * parameters in spi_nor_no_sfdp_init_params() which later on can be overwritten
+ * when parsing SFDP, if supported.
+ */
+static void spi_nor_init_params_deprecated(struct spi_nor *nor)
+{
+ spi_nor_no_sfdp_init_params(nor);
+
+ spi_nor_manufacturer_init_params(nor);
+
+ if ((SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_OCTAL_READ |
+ SPI_NOR_OCTAL_DTR_READ) &&
+ !(nor->info->no_sfdp_flags & SPI_NOR_SKIP_SFDP))
+ spi_nor_sfdp_init_params_deprecated(nor);
+}
+
+/**
+ * spi_nor_init_default_params() - Default initialization of flash parameters
+ * and settings. Done for all flashes, regardless is they define SFDP tables
+ * or not.
+ * @nor: pointer to a 'struct spi_nor'.
+ */
+static void spi_nor_init_default_params(struct spi_nor *nor)
+{
+ struct spi_nor_flash_parameter *params = nor->params;
+ const struct flash_info *info = nor->info;
+ struct device_node *np = spi_nor_get_flash_node(nor);
+
+ params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+ params->set_4byte_addr_mode = spansion_set_4byte_addr_mode;
+ params->setup = spi_nor_default_setup;
+ params->otp.org = &info->otp_org;
+
+ /* Default to 16-bit Write Status (01h) Command */
+ nor->flags |= SNOR_F_HAS_16BIT_SR;
+
+ /* Set SPI NOR sizes. */
+ params->writesize = 1;
+ params->size = (u64)info->sector_size * info->n_sectors;
+ params->page_size = info->page_size;
+
+ if (!(info->flags & SPI_NOR_NO_FR)) {
+ /* Default to Fast Read for DT and non-DT platform devices. */
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
+
+ /* Mask out Fast Read if not requested at DT instantiation. */
+ if (np && !of_property_read_bool(np, "m25p,fast-read"))
+ params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
+ }
+
+ /* (Fast) Read settings. */
+ params->hwcaps.mask |= SNOR_HWCAPS_READ;
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ],
+ 0, 0, SPINOR_OP_READ,
+ SNOR_PROTO_1_1_1);
+
+ if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST],
+ 0, 8, SPINOR_OP_READ_FAST,
+ SNOR_PROTO_1_1_1);
+ /* Page Program settings. */
+ params->hwcaps.mask |= SNOR_HWCAPS_PP;
+ spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP],
+ SPINOR_OP_PP, SNOR_PROTO_1_1_1);
+}
+
/**
* spi_nor_init_params() - Initialize the flash's parameters and settings.
* @nor: pointer to a 'struct spi_nor'.
@@ -2759,7 +2793,7 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
* which can be overwritten by:
* 3/ SFDP flash parameters initialization. JESD216 SFDP is a standard and
* should be more accurate that the above.
- * spi_nor_sfdp_init_params()
+ * spi_nor_parse_sfdp() or spi_nor_sfdp_init_params_deprecated()
*
* Please note that there is a ->post_bfpt() fixup hook that can overwrite
* the flash parameters and settings immediately after parsing the Basic
@@ -2773,24 +2807,28 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
* parameters that are not declared in the JESD216 SFDP standard, or where SFDP
* tables are not defined at all.
* spi_nor_late_init_params()
+ *
+ * Return: 0 on success, -errno otherwise.
*/
static int spi_nor_init_params(struct spi_nor *nor)
{
+ int ret;
+
nor->params = devm_kzalloc(nor->dev, sizeof(*nor->params), GFP_KERNEL);
if (!nor->params)
return -ENOMEM;
- spi_nor_info_init_params(nor);
-
- spi_nor_manufacturer_init_params(nor);
+ spi_nor_init_default_params(nor);
- if ((nor->info->parse_sfdp ||
- (nor->info->no_sfdp_flags & (SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ |
- SPI_NOR_OCTAL_READ |
- SPI_NOR_OCTAL_DTR_READ))) &&
- !(nor->info->no_sfdp_flags & SPI_NOR_SKIP_SFDP))
- spi_nor_sfdp_init_params(nor);
+ if (nor->info->parse_sfdp) {
+ ret = spi_nor_parse_sfdp(nor);
+ if (ret) {
+ dev_err(nor->dev, "BFPT parsing failed. Please consider using SPI_NOR_SKIP_SFDP when declaring the flash\n");
+ return ret;
+ }
+ } else {
+ spi_nor_init_params_deprecated(nor);
+ }
spi_nor_late_init_params(nor);
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 09/13] mtd: spi-nor: core: Move spi_nor_set_addr_width() in spi_nor_setup()
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
spi_nor_setup() configures the SPI NOR memory. Setting the addr width
is too a configuration, hence we can move the spi_nor_set_addr_width()
in spi_nor_setup().
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
---
v4: no changes
drivers/mtd/spi-nor/core.c | 102 +++++++++++++++++++------------------
1 file changed, 52 insertions(+), 50 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 4ff386719674..655db0fe49d2 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2484,13 +2484,61 @@ static int spi_nor_default_setup(struct spi_nor *nor,
return 0;
}
+static int spi_nor_set_addr_width(struct spi_nor *nor)
+{
+ if (nor->addr_width) {
+ /* already configured from SFDP */
+ } else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
+ /*
+ * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
+ * in this protocol an odd address width cannot be used because
+ * then the address phase would only span a cycle and a half.
+ * Half a cycle would be left over. We would then have to start
+ * the dummy phase in the middle of a cycle and so too the data
+ * phase, and we will end the transaction with half a cycle left
+ * over.
+ *
+ * Force all 8D-8D-8D flashes to use an address width of 4 to
+ * avoid this situation.
+ */
+ nor->addr_width = 4;
+ } else if (nor->info->addr_width) {
+ nor->addr_width = nor->info->addr_width;
+ } else {
+ nor->addr_width = 3;
+ }
+
+ if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
+ /* enable 4-byte addressing if the device exceeds 16MiB */
+ nor->addr_width = 4;
+ }
+
+ if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
+ dev_dbg(nor->dev, "address width is too large: %u\n",
+ nor->addr_width);
+ return -EINVAL;
+ }
+
+ /* Set 4byte opcodes when possible. */
+ if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
+ !(nor->flags & SNOR_F_HAS_4BAIT))
+ spi_nor_set_4byte_opcodes(nor);
+
+ return 0;
+}
+
static int spi_nor_setup(struct spi_nor *nor,
const struct spi_nor_hwcaps *hwcaps)
{
- if (!nor->params->setup)
- return 0;
+ int ret;
- return nor->params->setup(nor, hwcaps);
+ if (nor->params->setup) {
+ ret = nor->params->setup(nor, hwcaps);
+ if (ret)
+ return ret;
+ }
+
+ return spi_nor_set_addr_width(nor);
}
/**
@@ -3075,49 +3123,6 @@ static const struct flash_info *spi_nor_match_id(struct spi_nor *nor,
return NULL;
}
-static int spi_nor_set_addr_width(struct spi_nor *nor)
-{
- if (nor->addr_width) {
- /* already configured from SFDP */
- } else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
- /*
- * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
- * in this protocol an odd address width cannot be used because
- * then the address phase would only span a cycle and a half.
- * Half a cycle would be left over. We would then have to start
- * the dummy phase in the middle of a cycle and so too the data
- * phase, and we will end the transaction with half a cycle left
- * over.
- *
- * Force all 8D-8D-8D flashes to use an address width of 4 to
- * avoid this situation.
- */
- nor->addr_width = 4;
- } else if (nor->info->addr_width) {
- nor->addr_width = nor->info->addr_width;
- } else {
- nor->addr_width = 3;
- }
-
- if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
- /* enable 4-byte addressing if the device exceeds 16MiB */
- nor->addr_width = 4;
- }
-
- if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
- dev_dbg(nor->dev, "address width is too large: %u\n",
- nor->addr_width);
- return -EINVAL;
- }
-
- /* Set 4byte opcodes when possible. */
- if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
- !(nor->flags & SNOR_F_HAS_4BAIT))
- spi_nor_set_4byte_opcodes(nor);
-
- return 0;
-}
-
static void spi_nor_debugfs_init(struct spi_nor *nor,
const struct flash_info *info)
{
@@ -3249,15 +3254,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
* - select op codes for (Fast) Read, Page Program and Sector Erase.
* - set the number of dummy cycles (mode cycles + wait states).
* - set the SPI protocols for register and memory accesses.
+ * - set the address width.
*/
ret = spi_nor_setup(nor, hwcaps);
if (ret)
return ret;
- ret = spi_nor_set_addr_width(nor);
- if (ret)
- return ret;
-
/* Send all the required SPI flash commands to initialize device */
ret = spi_nor_init(nor);
if (ret)
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 09/13] mtd: spi-nor: core: Move spi_nor_set_addr_width() in spi_nor_setup()
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
spi_nor_setup() configures the SPI NOR memory. Setting the addr width
is too a configuration, hence we can move the spi_nor_set_addr_width()
in spi_nor_setup().
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
---
v4: no changes
drivers/mtd/spi-nor/core.c | 102 +++++++++++++++++++------------------
1 file changed, 52 insertions(+), 50 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 4ff386719674..655db0fe49d2 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2484,13 +2484,61 @@ static int spi_nor_default_setup(struct spi_nor *nor,
return 0;
}
+static int spi_nor_set_addr_width(struct spi_nor *nor)
+{
+ if (nor->addr_width) {
+ /* already configured from SFDP */
+ } else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
+ /*
+ * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
+ * in this protocol an odd address width cannot be used because
+ * then the address phase would only span a cycle and a half.
+ * Half a cycle would be left over. We would then have to start
+ * the dummy phase in the middle of a cycle and so too the data
+ * phase, and we will end the transaction with half a cycle left
+ * over.
+ *
+ * Force all 8D-8D-8D flashes to use an address width of 4 to
+ * avoid this situation.
+ */
+ nor->addr_width = 4;
+ } else if (nor->info->addr_width) {
+ nor->addr_width = nor->info->addr_width;
+ } else {
+ nor->addr_width = 3;
+ }
+
+ if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
+ /* enable 4-byte addressing if the device exceeds 16MiB */
+ nor->addr_width = 4;
+ }
+
+ if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
+ dev_dbg(nor->dev, "address width is too large: %u\n",
+ nor->addr_width);
+ return -EINVAL;
+ }
+
+ /* Set 4byte opcodes when possible. */
+ if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
+ !(nor->flags & SNOR_F_HAS_4BAIT))
+ spi_nor_set_4byte_opcodes(nor);
+
+ return 0;
+}
+
static int spi_nor_setup(struct spi_nor *nor,
const struct spi_nor_hwcaps *hwcaps)
{
- if (!nor->params->setup)
- return 0;
+ int ret;
- return nor->params->setup(nor, hwcaps);
+ if (nor->params->setup) {
+ ret = nor->params->setup(nor, hwcaps);
+ if (ret)
+ return ret;
+ }
+
+ return spi_nor_set_addr_width(nor);
}
/**
@@ -3075,49 +3123,6 @@ static const struct flash_info *spi_nor_match_id(struct spi_nor *nor,
return NULL;
}
-static int spi_nor_set_addr_width(struct spi_nor *nor)
-{
- if (nor->addr_width) {
- /* already configured from SFDP */
- } else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
- /*
- * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
- * in this protocol an odd address width cannot be used because
- * then the address phase would only span a cycle and a half.
- * Half a cycle would be left over. We would then have to start
- * the dummy phase in the middle of a cycle and so too the data
- * phase, and we will end the transaction with half a cycle left
- * over.
- *
- * Force all 8D-8D-8D flashes to use an address width of 4 to
- * avoid this situation.
- */
- nor->addr_width = 4;
- } else if (nor->info->addr_width) {
- nor->addr_width = nor->info->addr_width;
- } else {
- nor->addr_width = 3;
- }
-
- if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
- /* enable 4-byte addressing if the device exceeds 16MiB */
- nor->addr_width = 4;
- }
-
- if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
- dev_dbg(nor->dev, "address width is too large: %u\n",
- nor->addr_width);
- return -EINVAL;
- }
-
- /* Set 4byte opcodes when possible. */
- if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
- !(nor->flags & SNOR_F_HAS_4BAIT))
- spi_nor_set_4byte_opcodes(nor);
-
- return 0;
-}
-
static void spi_nor_debugfs_init(struct spi_nor *nor,
const struct flash_info *info)
{
@@ -3249,15 +3254,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
* - select op codes for (Fast) Read, Page Program and Sector Erase.
* - set the number of dummy cycles (mode cycles + wait states).
* - set the SPI protocols for register and memory accesses.
+ * - set the address width.
*/
ret = spi_nor_setup(nor, hwcaps);
if (ret)
return ret;
- ret = spi_nor_set_addr_width(nor);
- if (ret)
- return ret;
-
/* Send all the required SPI flash commands to initialize device */
ret = spi_nor_init(nor);
if (ret)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 10/13] mtd: spi-nor: winbond: w25q256jvm: Init flash based on SFDP
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
Get rid of the static initialization of the flash parameters and
init them when parsing SFDP.
Generated a 256 Kbyte random data and did an erase, write, read back
and compare test. The flash uses for reads SPINOR_OP_READ_1_4_4 0xeb,
for erases SPINOR_OP_BE_4K 0x20, and for writes SPINOR_OP_PP 0x02.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: use new flag macros
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/jedec_id
ef7019
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/manufacturer
winbond
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/partname
w25q256jvm
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/sfdp > sfdp-w25q256jvm
xxd -p sfdp-w25q256jvm
53464450050100ff00050110800000ffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffe520fbffffffff0f44eb086b083b42bbfeffffffffff
0000ffff40eb0c200f5210d800003602a60082ea14d3e96376337a757a75
f7a2d55c19f74dffe970f9a5
sha1sum sfdp-w25q256jvm
1d9f526670a97553a648567e051e8f7723f7a73a sfdp-w25q256jvm
drivers/mtd/spi-nor/winbond.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 421509406368..a7573df0a62d 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -117,8 +117,7 @@ static const struct flash_info winbond_parts[] = {
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
.fixups = &w25q256_fixups },
{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512)
- NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ) },
+ PARSE_SFDP },
{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512)
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 10/13] mtd: spi-nor: winbond: w25q256jvm: Init flash based on SFDP
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
Get rid of the static initialization of the flash parameters and
init them when parsing SFDP.
Generated a 256 Kbyte random data and did an erase, write, read back
and compare test. The flash uses for reads SPINOR_OP_READ_1_4_4 0xeb,
for erases SPINOR_OP_BE_4K 0x20, and for writes SPINOR_OP_PP 0x02.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: use new flag macros
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/jedec_id
ef7019
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/manufacturer
winbond
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/partname
w25q256jvm
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/sfdp > sfdp-w25q256jvm
xxd -p sfdp-w25q256jvm
53464450050100ff00050110800000ffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffe520fbffffffff0f44eb086b083b42bbfeffffffffff
0000ffff40eb0c200f5210d800003602a60082ea14d3e96376337a757a75
f7a2d55c19f74dffe970f9a5
sha1sum sfdp-w25q256jvm
1d9f526670a97553a648567e051e8f7723f7a73a sfdp-w25q256jvm
drivers/mtd/spi-nor/winbond.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 421509406368..a7573df0a62d 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -117,8 +117,7 @@ static const struct flash_info winbond_parts[] = {
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
.fixups = &w25q256_fixups },
{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512)
- NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ) },
+ PARSE_SFDP },
{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512)
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 11/13] mtd: spi-nor: spansion: s25fl256s0: Skip SFDP parsing
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
s25fl256s0 does not define the SFDP tables nor implements the
RDSFDP 0x5a command. Skip the SFDP parsing in order to avoid
issuing an unsupported command to the flash.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: use new flag macros
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/jedec_id
0102194d0080
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/manufacturer
spansion
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/partname
s25fl256s0
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/sfdp
cat: '/sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/sfdp': No such file or directory
drivers/mtd/spi-nor/spansion.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 1282a759cd75..92c2350e7ff3 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -210,7 +210,8 @@ static const struct flash_info spansion_parts[] = {
NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128)
FLAGS(USE_CLSR)
- NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ NO_SFDP_FLAGS(SPI_NOR_SKIP_SFDP | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
{ "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512)
FLAGS(USE_CLSR)
NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 11/13] mtd: spi-nor: spansion: s25fl256s0: Skip SFDP parsing
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
s25fl256s0 does not define the SFDP tables nor implements the
RDSFDP 0x5a command. Skip the SFDP parsing in order to avoid
issuing an unsupported command to the flash.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: use new flag macros
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/jedec_id
0102194d0080
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/manufacturer
spansion
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/partname
s25fl256s0
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/sfdp
cat: '/sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/sfdp': No such file or directory
drivers/mtd/spi-nor/spansion.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 1282a759cd75..92c2350e7ff3 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -210,7 +210,8 @@ static const struct flash_info spansion_parts[] = {
NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128)
FLAGS(USE_CLSR)
- NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ NO_SFDP_FLAGS(SPI_NOR_SKIP_SFDP | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
{ "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512)
FLAGS(USE_CLSR)
NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 12/13] mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
Get rid of the static initialization of the flash parameters and
init them when parsing SFDP.
Generated a 256 Kbyte random data and did an erase, write, read back
and compare test. The flash uses for reads SPINOR_OP_READ_1_4_4_4B 0xec,
for erases SPINOR_OP_BE_4K_4B 0x21, and for writes SPINOR_OP_PP_1_1_4_4B
0x34.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: use new flag macros
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/jedec_id
c84019
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/manufacturer
gigadevice
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/partname
gd25q256
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/sfdp > gd25q256-sfdp
xxd -p sfdp-gd25q256
53464450060102ff00060110300000ffc8000103900000ff84000102c000
00ffffffffffffffffffffffffffffffffffe520f3ffffffff0f44eb086b
083b42bbeeffffffffff00ffffff00ff0c200f5210d800ff4262c9fe82e9
1458ec6006337a757a7504bdd55c0006440008500001ffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffff003600279cf9
7764fccb58e3ffffffffffffffffffffffffffffffffffffffffffffffff
sha1sum sfdp-gd25q256
9f25eb3b17832b26dbba288f1b07de1f8a42e446 sfdp-gd25q256
drivers/mtd/spi-nor/gigadevice.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
index 94634797fdd6..e9817233c51f 100644
--- a/drivers/mtd/spi-nor/gigadevice.c
+++ b/drivers/mtd/spi-nor/gigadevice.c
@@ -53,9 +53,8 @@ static const struct flash_info gigadevice_parts[] = {
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
{ "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512)
- FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_TB_SR_BIT6)
- NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ PARSE_SFDP
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
.fixups = &gd25q256_fixups },
};
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 12/13] mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
Get rid of the static initialization of the flash parameters and
init them when parsing SFDP.
Generated a 256 Kbyte random data and did an erase, write, read back
and compare test. The flash uses for reads SPINOR_OP_READ_1_4_4_4B 0xec,
for erases SPINOR_OP_BE_4K_4B 0x21, and for writes SPINOR_OP_PP_1_1_4_4B
0x34.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: use new flag macros
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/jedec_id
c84019
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/manufacturer
gigadevice
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/partname
gd25q256
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/sfdp > gd25q256-sfdp
xxd -p sfdp-gd25q256
53464450060102ff00060110300000ffc8000103900000ff84000102c000
00ffffffffffffffffffffffffffffffffffe520f3ffffffff0f44eb086b
083b42bbeeffffffffff00ffffff00ff0c200f5210d800ff4262c9fe82e9
1458ec6006337a757a7504bdd55c0006440008500001ffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffff003600279cf9
7764fccb58e3ffffffffffffffffffffffffffffffffffffffffffffffff
sha1sum sfdp-gd25q256
9f25eb3b17832b26dbba288f1b07de1f8a42e446 sfdp-gd25q256
drivers/mtd/spi-nor/gigadevice.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
index 94634797fdd6..e9817233c51f 100644
--- a/drivers/mtd/spi-nor/gigadevice.c
+++ b/drivers/mtd/spi-nor/gigadevice.c
@@ -53,9 +53,8 @@ static const struct flash_info gigadevice_parts[] = {
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
{ "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512)
- FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_TB_SR_BIT6)
- NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ PARSE_SFDP
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
.fixups = &gd25q256_fixups },
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 13/13] mtd: spi-nor: issi: is25lp256: Init flash based on SFDP
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 9:50 ` Tudor Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, mail, zhengxunli
Get rid of the static initialization of the flash parameters and
init them when parsing SFDP.
Generated a 256 Kbyte random data and did an erase, write, read back
and compare test. The flash uses for reads SPINOR_OP_READ_1_4_4_4B 0xec,
for erases SPINOR_OP_BE_4K_4B 0x21, and for writes SPINOR_OP_PP_4B 0x12.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: use new flag macros
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/jedec_id
9d6019
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/manufacturer
issi
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/partname
is25lp256
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/sfdp > sfdp-is25lp256
xxd -p sfdp-is25lp256
53464450060101ff00060110300000ff9d05010380000002ffffffffffff
ffffffffffffffffffffffffffffffffffffe520f9ffffffff0f44eb086b
083b80bbfeffffffffff00ffffff44eb0c200f5210d800ff234ac90082d8
11cecccd68467a757a75f7aed55c4a422cfff030f2a9ffffffffffffffff
ffffffffffffffff003600239ef9c0648fefffff
sha1sum sfdp-is25lp256
98d61eb4691e61521b84b83e1ddb8132cae2fea5 sfdp-is25lp256
drivers/mtd/spi-nor/issi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 6707fcfda055..c4fff3c36356 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -46,7 +46,7 @@ static const struct flash_info issi_parts[] = {
{ "is25lp128", INFO(0x9d6018, 0, 64 * 1024, 256)
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
{ "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512)
- NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ PARSE_SFDP
FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
.fixups = &is25lp256_fixups },
{ "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64)
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v4 13/13] mtd: spi-nor: issi: is25lp256: Init flash based on SFDP
@ 2021-11-22 9:50 ` Tudor Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor Ambarus @ 2021-11-22 9:50 UTC (permalink / raw)
To: michael, vigneshr, p.yadav
Cc: macromorgan, jaimeliao, Tudor Ambarus, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, mail, zhengxunli
Get rid of the static initialization of the flash parameters and
init them when parsing SFDP.
Generated a 256 Kbyte random data and did an erase, write, read back
and compare test. The flash uses for reads SPINOR_OP_READ_1_4_4_4B 0xec,
for erases SPINOR_OP_BE_4K_4B 0x21, and for writes SPINOR_OP_PP_4B 0x12.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v4: use new flag macros
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/jedec_id
9d6019
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/manufacturer
issi
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/partname
is25lp256
root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/sfdp > sfdp-is25lp256
xxd -p sfdp-is25lp256
53464450060101ff00060110300000ff9d05010380000002ffffffffffff
ffffffffffffffffffffffffffffffffffffe520f9ffffffff0f44eb086b
083b80bbfeffffffffff00ffffff44eb0c200f5210d800ff234ac90082d8
11cecccd68467a757a75f7aed55c4a422cfff030f2a9ffffffffffffffff
ffffffffffffffff003600239ef9c0648fefffff
sha1sum sfdp-is25lp256
98d61eb4691e61521b84b83e1ddb8132cae2fea5 sfdp-is25lp256
drivers/mtd/spi-nor/issi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 6707fcfda055..c4fff3c36356 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -46,7 +46,7 @@ static const struct flash_info issi_parts[] = {
{ "is25lp128", INFO(0x9d6018, 0, 64 * 1024, 256)
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
{ "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512)
- NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ PARSE_SFDP
FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
.fixups = &is25lp256_fixups },
{ "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 50+ messages in thread
* Re: [PATCH v4 12/13] mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 18:19 ` Michael Walle
-1 siblings, 0 replies; 50+ messages in thread
From: Michael Walle @ 2021-11-22 18:19 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, p.yadav, mail, zhengxunli
Am 2021-11-22 10:50, schrieb Tudor Ambarus:
> xxd -p sfdp-gd25q256
> 53464450060102ff00060110300000ffc8000103900000ff84000102c000
> 00ffffffffffffffffffffffffffffffffffe520f3ffffffff0f44eb086b
> 083b42bbeeffffffffff00ffffff00ff0c200f5210d800ff4262c9fe82e9
> 1458ec6006337a757a7504bdd55c0006440008500001ffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffff003600279cf9
> 7764fccb58e3ffffffffffffffffffffffffffffffffffffffffffffffff
>
> sha1sum sfdp-gd25q256
> 9f25eb3b17832b26dbba288f1b07de1f8a42e446 sfdp-gd25q256
something is wrong here:
$ cat gigadevice/gd25q256.txt
53464450060102ff00060110300000ffc8000103900000ff84000102c000
00ffffffffffffffffffffffffffffffffffe520f3ffffffff0f44eb086b
083b42bbeeffffffffff00ffffff00ff0c200f5210d800ff4262c9fe82e9
1458ec6006337a757a7504bdd55c0006440008500001ffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffff003600279cf9
7764fccb58e3ffffffffffffffffffffffffffffffffffffffffffffffff
$ xxd -r -p gigadevice/gd25q256.txt > gigadevice/gd25q256
$ sha1sum gigadevice/gd25q256
ca4625e284d7cf35fe6b6afe9c7f780b35a5fce7 gigadevice/gd25q256
-michael
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 12/13] mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP
@ 2021-11-22 18:19 ` Michael Walle
0 siblings, 0 replies; 50+ messages in thread
From: Michael Walle @ 2021-11-22 18:19 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, p.yadav, mail, zhengxunli
Am 2021-11-22 10:50, schrieb Tudor Ambarus:
> xxd -p sfdp-gd25q256
> 53464450060102ff00060110300000ffc8000103900000ff84000102c000
> 00ffffffffffffffffffffffffffffffffffe520f3ffffffff0f44eb086b
> 083b42bbeeffffffffff00ffffff00ff0c200f5210d800ff4262c9fe82e9
> 1458ec6006337a757a7504bdd55c0006440008500001ffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffff003600279cf9
> 7764fccb58e3ffffffffffffffffffffffffffffffffffffffffffffffff
>
> sha1sum sfdp-gd25q256
> 9f25eb3b17832b26dbba288f1b07de1f8a42e446 sfdp-gd25q256
something is wrong here:
$ cat gigadevice/gd25q256.txt
53464450060102ff00060110300000ffc8000103900000ff84000102c000
00ffffffffffffffffffffffffffffffffffe520f3ffffffff0f44eb086b
083b42bbeeffffffffff00ffffff00ff0c200f5210d800ff4262c9fe82e9
1458ec6006337a757a7504bdd55c0006440008500001ffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffff003600279cf9
7764fccb58e3ffffffffffffffffffffffffffffffffffffffffffffffff
$ xxd -r -p gigadevice/gd25q256.txt > gigadevice/gd25q256
$ sha1sum gigadevice/gd25q256
ca4625e284d7cf35fe6b6afe9c7f780b35a5fce7 gigadevice/gd25q256
-michael
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 01/13] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 18:28 ` Michael Walle
-1 siblings, 0 replies; 50+ messages in thread
From: Michael Walle @ 2021-11-22 18:28 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, p.yadav, mail, zhengxunli
Am 2021-11-22 10:50, schrieb Tudor Ambarus:
> Use NOR parameters in the probe's sequence of calls, thus
> nor->params->size instead of nor->mtd.size and let the mtd_info
> fields be used by the mtd calls (mtd->_erase, mtd->_read, mtd->_write).
> mtd_info fields should not be used during probe because we haven't
> registered mtd yet.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
-michael
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 01/13] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls
@ 2021-11-22 18:28 ` Michael Walle
0 siblings, 0 replies; 50+ messages in thread
From: Michael Walle @ 2021-11-22 18:28 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, p.yadav, mail, zhengxunli
Am 2021-11-22 10:50, schrieb Tudor Ambarus:
> Use NOR parameters in the probe's sequence of calls, thus
> nor->params->size instead of nor->mtd.size and let the mtd_info
> fields be used by the mtd calls (mtd->_erase, mtd->_read, mtd->_write).
> mtd_info fields should not be used during probe because we haven't
> registered mtd yet.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
-michael
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 04/13] mtd: spi-nor: core: Introduce flash_info mfr_flags
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-22 18:34 ` Michael Walle
-1 siblings, 0 replies; 50+ messages in thread
From: Michael Walle @ 2021-11-22 18:34 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, nicolas.ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, p.yadav, mail, zhengxunli
Am 2021-11-22 10:50, schrieb Tudor Ambarus:
> Used in the manufacturer fixup hooks to differentiate support
> between flashes of the same manufacturer. Not used in the
> SPI NOR core.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Nice!
Reviewed-by: Michael Walle <michael@walle.cc>
> @@ -58,28 +61,46 @@ static const struct spi_nor_fixups sst26vf_fixups =
> {
> static const struct flash_info sst_parts[] = {
> /* SST -- large erase sizes are "overlays", "sectors" are 4K */
> { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8,
> - SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK |
> SPI_NOR_SWP_IS_VOLATILE) },
> + SECT_4K | SPI_NOR_HAS_LOCK |
> + SPI_NOR_SWP_IS_VOLATILE)
> + MFR_FLAGS(SST_WRITE) },
Looks a bit odd, but I'm fine with that. Does checkpatch.pl complain,
though?
-michael
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 04/13] mtd: spi-nor: core: Introduce flash_info mfr_flags
@ 2021-11-22 18:34 ` Michael Walle
0 siblings, 0 replies; 50+ messages in thread
From: Michael Walle @ 2021-11-22 18:34 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, p.yadav, mail, zhengxunli
Am 2021-11-22 10:50, schrieb Tudor Ambarus:
> Used in the manufacturer fixup hooks to differentiate support
> between flashes of the same manufacturer. Not used in the
> SPI NOR core.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Nice!
Reviewed-by: Michael Walle <michael@walle.cc>
> @@ -58,28 +61,46 @@ static const struct spi_nor_fixups sst26vf_fixups =
> {
> static const struct flash_info sst_parts[] = {
> /* SST -- large erase sizes are "overlays", "sectors" are 4K */
> { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8,
> - SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK |
> SPI_NOR_SWP_IS_VOLATILE) },
> + SECT_4K | SPI_NOR_HAS_LOCK |
> + SPI_NOR_SWP_IS_VOLATILE)
> + MFR_FLAGS(SST_WRITE) },
Looks a bit odd, but I'm fine with that. Does checkpatch.pl complain,
though?
-michael
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 04/13] mtd: spi-nor: core: Introduce flash_info mfr_flags
2021-11-22 18:34 ` Michael Walle
@ 2021-11-23 6:43 ` Tudor.Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor.Ambarus @ 2021-11-23 6:43 UTC (permalink / raw)
To: michael
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, Nicolas.Ferre, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, p.yadav, mail, zhengxunli
On 11/22/21 8:34 PM, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Am 2021-11-22 10:50, schrieb Tudor Ambarus:
>> Used in the manufacturer fixup hooks to differentiate support
>> between flashes of the same manufacturer. Not used in the
>> SPI NOR core.
>>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>
> Nice!
> Reviewed-by: Michael Walle <michael@walle.cc>
>
>> @@ -58,28 +61,46 @@ static const struct spi_nor_fixups sst26vf_fixups =
>> {
>> static const struct flash_info sst_parts[] = {
>> /* SST -- large erase sizes are "overlays", "sectors" are 4K */
>> { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8,
>> - SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK |
>> SPI_NOR_SWP_IS_VOLATILE) },
>> + SECT_4K | SPI_NOR_HAS_LOCK |
>> + SPI_NOR_SWP_IS_VOLATILE)
>> + MFR_FLAGS(SST_WRITE) },
>
> Looks a bit odd, but I'm fine with that. Does checkpatch.pl complain,
> though?
>
I've run checkpatch --strict for the series, no complaint for things introduced
by me. None here. Check patch 5/13 to see how all the flags will look like.
Thanks,
ta
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 04/13] mtd: spi-nor: core: Introduce flash_info mfr_flags
@ 2021-11-23 6:43 ` Tudor.Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor.Ambarus @ 2021-11-23 6:43 UTC (permalink / raw)
To: michael
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, linux-mtd, linux-arm-kernel, code, miquel.raynal,
heiko.thiery, sr, figgyc, p.yadav, mail, zhengxunli
On 11/22/21 8:34 PM, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Am 2021-11-22 10:50, schrieb Tudor Ambarus:
>> Used in the manufacturer fixup hooks to differentiate support
>> between flashes of the same manufacturer. Not used in the
>> SPI NOR core.
>>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>
> Nice!
> Reviewed-by: Michael Walle <michael@walle.cc>
>
>> @@ -58,28 +61,46 @@ static const struct spi_nor_fixups sst26vf_fixups =
>> {
>> static const struct flash_info sst_parts[] = {
>> /* SST -- large erase sizes are "overlays", "sectors" are 4K */
>> { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8,
>> - SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK |
>> SPI_NOR_SWP_IS_VOLATILE) },
>> + SECT_4K | SPI_NOR_HAS_LOCK |
>> + SPI_NOR_SWP_IS_VOLATILE)
>> + MFR_FLAGS(SST_WRITE) },
>
> Looks a bit odd, but I'm fine with that. Does checkpatch.pl complain,
> though?
>
I've run checkpatch --strict for the series, no complaint for things introduced
by me. None here. Check patch 5/13 to see how all the flags will look like.
Thanks,
ta
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 01/13] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-11-30 9:56 ` Pratyush Yadav
-1 siblings, 0 replies; 50+ messages in thread
From: Pratyush Yadav @ 2021-11-30 9:56 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, nicolas.ferre, michael, linux-mtd, linux-arm-kernel,
code, miquel.raynal, heiko.thiery, sr, mail, zhengxunli
On 22/11/21 11:50AM, Tudor Ambarus wrote:
> Use NOR parameters in the probe's sequence of calls, thus
> nor->params->size instead of nor->mtd.size and let the mtd_info
> fields be used by the mtd calls (mtd->_erase, mtd->_read, mtd->_write).
> mtd_info fields should not be used during probe because we haven't
> registered mtd yet.
These changes look good to me, but there is one thing this seems to be
missing. In xlinx.c, I see that xilinx_setup() sets nor->mtd.size. I
think it should be updated to set nor->params->size instead otherwise
functions like spi_nor_set_addr_width() might end up using the wrong
value.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
> v4: new patch
>
> drivers/mtd/spi-nor/core.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 88dd0908d172..5b9c827d411c 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2115,7 +2115,7 @@ static int spi_nor_spimem_check_op(struct spi_nor *nor,
> */
> op->addr.nbytes = 4;
> if (!spi_mem_supports_op(nor->spimem, op)) {
> - if (nor->mtd.size > SZ_16M)
> + if (nor->params->size > SZ_16M)
> return -EOPNOTSUPP;
>
> /* If flash size <= 16MB, 3 address bytes are sufficient */
> @@ -3011,7 +3011,7 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
> nor->addr_width = 3;
> }
>
> - if (nor->addr_width == 3 && nor->mtd.size > 0x1000000) {
> + if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
> /* enable 4-byte addressing if the device exceeds 16MiB */
> nor->addr_width = 4;
> }
> @@ -3245,7 +3245,7 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor)
> SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
> SPI_MEM_OP_DATA_IN(0, NULL, 0)),
> .offset = 0,
> - .length = nor->mtd.size,
> + .length = nor->params->size,
> };
> struct spi_mem_op *op = &info.op_tmpl;
>
> @@ -3276,7 +3276,7 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor)
> SPI_MEM_OP_NO_DUMMY,
> SPI_MEM_OP_DATA_OUT(0, NULL, 0)),
> .offset = 0,
> - .length = nor->mtd.size,
> + .length = nor->params->size,
> };
> struct spi_mem_op *op = &info.op_tmpl;
>
> --
> 2.25.1
>
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 01/13] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls
@ 2021-11-30 9:56 ` Pratyush Yadav
0 siblings, 0 replies; 50+ messages in thread
From: Pratyush Yadav @ 2021-11-30 9:56 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, michael, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, figgyc, mail, zhengxunli
On 22/11/21 11:50AM, Tudor Ambarus wrote:
> Use NOR parameters in the probe's sequence of calls, thus
> nor->params->size instead of nor->mtd.size and let the mtd_info
> fields be used by the mtd calls (mtd->_erase, mtd->_read, mtd->_write).
> mtd_info fields should not be used during probe because we haven't
> registered mtd yet.
These changes look good to me, but there is one thing this seems to be
missing. In xlinx.c, I see that xilinx_setup() sets nor->mtd.size. I
think it should be updated to set nor->params->size instead otherwise
functions like spi_nor_set_addr_width() might end up using the wrong
value.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
> v4: new patch
>
> drivers/mtd/spi-nor/core.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 88dd0908d172..5b9c827d411c 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2115,7 +2115,7 @@ static int spi_nor_spimem_check_op(struct spi_nor *nor,
> */
> op->addr.nbytes = 4;
> if (!spi_mem_supports_op(nor->spimem, op)) {
> - if (nor->mtd.size > SZ_16M)
> + if (nor->params->size > SZ_16M)
> return -EOPNOTSUPP;
>
> /* If flash size <= 16MB, 3 address bytes are sufficient */
> @@ -3011,7 +3011,7 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
> nor->addr_width = 3;
> }
>
> - if (nor->addr_width == 3 && nor->mtd.size > 0x1000000) {
> + if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
> /* enable 4-byte addressing if the device exceeds 16MiB */
> nor->addr_width = 4;
> }
> @@ -3245,7 +3245,7 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor)
> SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
> SPI_MEM_OP_DATA_IN(0, NULL, 0)),
> .offset = 0,
> - .length = nor->mtd.size,
> + .length = nor->params->size,
> };
> struct spi_mem_op *op = &info.op_tmpl;
>
> @@ -3276,7 +3276,7 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor)
> SPI_MEM_OP_NO_DUMMY,
> SPI_MEM_OP_DATA_OUT(0, NULL, 0)),
> .offset = 0,
> - .length = nor->mtd.size,
> + .length = nor->params->size,
> };
> struct spi_mem_op *op = &info.op_tmpl;
>
> --
> 2.25.1
>
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 02/13] mtd: spi-nor: Introduce spi_nor_set_mtd_info()
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-12-02 9:19 ` Pratyush Yadav
-1 siblings, 0 replies; 50+ messages in thread
From: Pratyush Yadav @ 2021-12-02 9:19 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, nicolas.ferre, michael, linux-mtd, linux-arm-kernel,
code, miquel.raynal, heiko.thiery, sr, mail, zhengxunli
On 22/11/21 11:50AM, Tudor Ambarus wrote:
> Used to init all the mtd_info fields. Move the mtd_info init
> the last thing in the spi_nor_scan(), so that we avoid superfluous
> initialization of the mtd_info fields in case of errors.
>
> While here use common naming scheme for functions that are setting
> mtd_info fields:
> s/spi_nor_register_locking_ops/spi_nor_set_mtd_locking_ops
> s/spi_nor_otp_init/spi_nor_set_mtd_otp_ops
> The functions names are self explanatory, get rid of the comment
> for the OTP function.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> Reviewed-by: Michael Walle <michael@walle.cc>
I am not particularly happy with spi_nor_try_unlock_all() using
nor->mtd, but I can live with it.
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
One small nitpick below.
>
> - /* Configure OTP parameters and ops */
> - spi_nor_otp_init(nor);
> + /* No mtd_info fields are used up to this point. */
How about "No mtd_info fields should be used up to this point" so we
give the programmer a command to not use mtd_info fields rather than
just stating a fact.
> + spi_nor_set_mtd_info(nor);
>
> dev_info(dev, "%s (%lld Kbytes)\n", info->name,
> (long long)mtd->size >> 10);
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 02/13] mtd: spi-nor: Introduce spi_nor_set_mtd_info()
@ 2021-12-02 9:19 ` Pratyush Yadav
0 siblings, 0 replies; 50+ messages in thread
From: Pratyush Yadav @ 2021-12-02 9:19 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, michael, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, figgyc, mail, zhengxunli
On 22/11/21 11:50AM, Tudor Ambarus wrote:
> Used to init all the mtd_info fields. Move the mtd_info init
> the last thing in the spi_nor_scan(), so that we avoid superfluous
> initialization of the mtd_info fields in case of errors.
>
> While here use common naming scheme for functions that are setting
> mtd_info fields:
> s/spi_nor_register_locking_ops/spi_nor_set_mtd_locking_ops
> s/spi_nor_otp_init/spi_nor_set_mtd_otp_ops
> The functions names are self explanatory, get rid of the comment
> for the OTP function.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> Reviewed-by: Michael Walle <michael@walle.cc>
I am not particularly happy with spi_nor_try_unlock_all() using
nor->mtd, but I can live with it.
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
One small nitpick below.
>
> - /* Configure OTP parameters and ops */
> - spi_nor_otp_init(nor);
> + /* No mtd_info fields are used up to this point. */
How about "No mtd_info fields should be used up to this point" so we
give the programmer a command to not use mtd_info fields rather than
just stating a fact.
> + spi_nor_set_mtd_info(nor);
>
> dev_info(dev, "%s (%lld Kbytes)\n", info->name,
> (long long)mtd->size >> 10);
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 03/13] mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is defined
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-12-02 9:31 ` Pratyush Yadav
-1 siblings, 0 replies; 50+ messages in thread
From: Pratyush Yadav @ 2021-12-02 9:31 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, nicolas.ferre, michael, linux-mtd, linux-arm-kernel,
code, miquel.raynal, heiko.thiery, sr, mail, zhengxunli
On 22/11/21 11:50AM, Tudor Ambarus wrote:
> spi_nor_post_sfdp_fixups() was called even when there were no SFDP
> tables defined. late_init() should be instead used for flashes that
> do not define SFDP tables.
>
> Use spi_nor_post_sfdp_fixups() just to fix SFDP data. post_sfdp()
> hook is as of now used just by s28hs512t, mt35xu512aba, and both
> support SFDP, there's no functional change with this patch.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 03/13] mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is defined
@ 2021-12-02 9:31 ` Pratyush Yadav
0 siblings, 0 replies; 50+ messages in thread
From: Pratyush Yadav @ 2021-12-02 9:31 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, michael, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, figgyc, mail, zhengxunli
On 22/11/21 11:50AM, Tudor Ambarus wrote:
> spi_nor_post_sfdp_fixups() was called even when there were no SFDP
> tables defined. late_init() should be instead used for flashes that
> do not define SFDP tables.
>
> Use spi_nor_post_sfdp_fixups() just to fix SFDP data. post_sfdp()
> hook is as of now used just by s28hs512t, mt35xu512aba, and both
> support SFDP, there's no functional change with this patch.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 04/13] mtd: spi-nor: core: Introduce flash_info mfr_flags
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-12-02 9:32 ` Pratyush Yadav
-1 siblings, 0 replies; 50+ messages in thread
From: Pratyush Yadav @ 2021-12-02 9:32 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, nicolas.ferre, michael, linux-mtd, linux-arm-kernel,
code, miquel.raynal, heiko.thiery, sr, mail, zhengxunli
On 22/11/21 11:50AM, Tudor Ambarus wrote:
> Used in the manufacturer fixup hooks to differentiate support
> between flashes of the same manufacturer. Not used in the
> SPI NOR core.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 04/13] mtd: spi-nor: core: Introduce flash_info mfr_flags
@ 2021-12-02 9:32 ` Pratyush Yadav
0 siblings, 0 replies; 50+ messages in thread
From: Pratyush Yadav @ 2021-12-02 9:32 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, michael, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, figgyc, mail, zhengxunli
On 22/11/21 11:50AM, Tudor Ambarus wrote:
> Used in the manufacturer fixup hooks to differentiate support
> between flashes of the same manufacturer. Not used in the
> SPI NOR core.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 05/13] mtd: spi-nor: Rework the flash_info flags
2021-11-22 9:50 ` Tudor Ambarus
@ 2021-12-02 10:01 ` Pratyush Yadav
-1 siblings, 0 replies; 50+ messages in thread
From: Pratyush Yadav @ 2021-12-02 10:01 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, nicolas.ferre, michael, linux-mtd, linux-arm-kernel,
code, miquel.raynal, heiko.thiery, sr, mail, zhengxunli
On 22/11/21 11:50AM, Tudor Ambarus wrote:
> Clarify for what the flash_info flags are used for. Split them in
> four categories and a bool:
> 1/ FLAGS: flags that indicate support that is not defined by the JESD216
> standard in its SFDP tables.
> 2/ NO_SFDP_FLAGS: these flags are used when the flash does not define the
> SFDP tables. These flags indicate support that can be discovered via
> SFDP. Used together with SPI_NOR_SKIP_SFDP flag.
> 3/ FIXUP_FLAGS: flags that indicate support that can be discovered
> via SFDP ideally, but can not be discovered for this particular flash
> because the SFDP table that indicates this support is not defined by
> the flash. In case the table for this support is defined but has wrong
> values, one should instead use a post_sfdp() hook to set the SNOR_F
> equivalent flag.
> 4/ MFR_FLAGS: manufacturer private flags. Used in the manufacturer
> fixup hooks to differentiate support between flashes of the same
> manufacturer.
> 5/ PARSE_SFDP: sets info->parse_sfdp to true. All flash_info entries
> that support SFDP should be converted to set info->parse_sfdp to true.
>
> SPI NOR flashes that statically declare one of the
> SPI_NOR_{DUAL, QUAD, OCTAL, OCTAL_DTR}_READ flags and do not support
> the RDSFDP command are gratuiously receiving the RDSFDP command
> in the attempt of parsing the SFDP tables. It is not desirable to issue
> commands that are not supported, so introduce PARSE_SFDP to help on this
> situation.
>
> New flash additions/updates should be declared/updated to use either
> PARSE_SFDP or SPI_NOR_SKIP_SFDP. Once all the flash_info entries are
> converted to use SPI_NOR_SKIP_SFDP or PARSE_SFDP, we can get rid of the
> SPI_NOR_SKIP_SFDP flag and use just the bool nor->info->parse_sfdp to
> determine whether to parse SFDP or not. SPI_NOR_SKIP_SFDP flag is kept
> just as a way to differentiate whether a flash is converted to the new
> flags logic or not.
> Support that can be discovered when parsing SFDP should not be duplicated
> by explicit flags at flash declaration. All the flash parameters will be
> discovered when parsing SFDP. Sometimes manufacturers wrongly define some
> fields in the SFDP tables. If that's the case, SFDP data can be amended
> with the fixups() hooks. It is not common, but if the SFDP tables are
> entirely wrong, and it does not worth the hassle to tweak the SFDP
> parameters by using the fixups hooks, or if the flash does not define the
> SFDP tables at all, then statically init the flash with the
> SPI_NOR_SKIP_SFDP flag and specify the rest of flash capabilities with
> the flash info flags.
>
> With time, we want to convert all flashes to use PARSE_SFDP and
> stop triggering the SFDP parsing with the
> SPI_NOR_{DUAL, QUAD, OCTAL*}_READ flags. Getting rid of the
> SPI_NOR_{OCTAL, OCTAL_DTR}_READ trigger is easily achievable,
> the rest are a long term goal.
>
> Manufacturer specific flags like USE_CLSR, USE_FSR, SPI_NOR_XSR_RDY,
> will be removed in a future series.
>
> No functional changes intended in this patch.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Thanks, this looks quite good to me.
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 05/13] mtd: spi-nor: Rework the flash_info flags
@ 2021-12-02 10:01 ` Pratyush Yadav
0 siblings, 0 replies; 50+ messages in thread
From: Pratyush Yadav @ 2021-12-02 10:01 UTC (permalink / raw)
To: Tudor Ambarus
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, michael, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, figgyc, mail, zhengxunli
On 22/11/21 11:50AM, Tudor Ambarus wrote:
> Clarify for what the flash_info flags are used for. Split them in
> four categories and a bool:
> 1/ FLAGS: flags that indicate support that is not defined by the JESD216
> standard in its SFDP tables.
> 2/ NO_SFDP_FLAGS: these flags are used when the flash does not define the
> SFDP tables. These flags indicate support that can be discovered via
> SFDP. Used together with SPI_NOR_SKIP_SFDP flag.
> 3/ FIXUP_FLAGS: flags that indicate support that can be discovered
> via SFDP ideally, but can not be discovered for this particular flash
> because the SFDP table that indicates this support is not defined by
> the flash. In case the table for this support is defined but has wrong
> values, one should instead use a post_sfdp() hook to set the SNOR_F
> equivalent flag.
> 4/ MFR_FLAGS: manufacturer private flags. Used in the manufacturer
> fixup hooks to differentiate support between flashes of the same
> manufacturer.
> 5/ PARSE_SFDP: sets info->parse_sfdp to true. All flash_info entries
> that support SFDP should be converted to set info->parse_sfdp to true.
>
> SPI NOR flashes that statically declare one of the
> SPI_NOR_{DUAL, QUAD, OCTAL, OCTAL_DTR}_READ flags and do not support
> the RDSFDP command are gratuiously receiving the RDSFDP command
> in the attempt of parsing the SFDP tables. It is not desirable to issue
> commands that are not supported, so introduce PARSE_SFDP to help on this
> situation.
>
> New flash additions/updates should be declared/updated to use either
> PARSE_SFDP or SPI_NOR_SKIP_SFDP. Once all the flash_info entries are
> converted to use SPI_NOR_SKIP_SFDP or PARSE_SFDP, we can get rid of the
> SPI_NOR_SKIP_SFDP flag and use just the bool nor->info->parse_sfdp to
> determine whether to parse SFDP or not. SPI_NOR_SKIP_SFDP flag is kept
> just as a way to differentiate whether a flash is converted to the new
> flags logic or not.
> Support that can be discovered when parsing SFDP should not be duplicated
> by explicit flags at flash declaration. All the flash parameters will be
> discovered when parsing SFDP. Sometimes manufacturers wrongly define some
> fields in the SFDP tables. If that's the case, SFDP data can be amended
> with the fixups() hooks. It is not common, but if the SFDP tables are
> entirely wrong, and it does not worth the hassle to tweak the SFDP
> parameters by using the fixups hooks, or if the flash does not define the
> SFDP tables at all, then statically init the flash with the
> SPI_NOR_SKIP_SFDP flag and specify the rest of flash capabilities with
> the flash info flags.
>
> With time, we want to convert all flashes to use PARSE_SFDP and
> stop triggering the SFDP parsing with the
> SPI_NOR_{DUAL, QUAD, OCTAL*}_READ flags. Getting rid of the
> SPI_NOR_{OCTAL, OCTAL_DTR}_READ trigger is easily achievable,
> the rest are a long term goal.
>
> Manufacturer specific flags like USE_CLSR, USE_FSR, SPI_NOR_XSR_RDY,
> will be removed in a future series.
>
> No functional changes intended in this patch.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Thanks, this looks quite good to me.
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 01/13] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls
2021-11-30 9:56 ` Pratyush Yadav
@ 2021-12-03 12:03 ` Tudor.Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor.Ambarus @ 2021-12-03 12:03 UTC (permalink / raw)
To: p.yadav
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, Nicolas.Ferre, michael, linux-mtd, linux-arm-kernel,
code, miquel.raynal, heiko.thiery, sr, mail, zhengxunli
On 11/30/21 11:56 AM, Pratyush Yadav wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 22/11/21 11:50AM, Tudor Ambarus wrote:
>> Use NOR parameters in the probe's sequence of calls, thus
>> nor->params->size instead of nor->mtd.size and let the mtd_info
>> fields be used by the mtd calls (mtd->_erase, mtd->_read, mtd->_write).
>> mtd_info fields should not be used during probe because we haven't
>> registered mtd yet.
>
> These changes look good to me, but there is one thing this seems to be
> missing. In xlinx.c, I see that xilinx_setup() sets nor->mtd.size. I
> think it should be updated to set nor->params->size instead otherwise
thanks, you're correct. But I should better do it as a separate patch
that fixes:
Fixes: 641edddb4f43 ("mtd: spi-nor: Add s3an_post_sfdp_fixups()")
because mtd->size is overwritten in that patch with
mtd->size = params->size;
while it should have kept its s3an specific value.
Will respin the entire series with this change as the first patch.
> functions like spi_nor_set_addr_width() might end up using the wrong
> value.
>
>>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>
>> ---
>> v4: new patch
>>
>> drivers/mtd/spi-nor/core.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
>> index 88dd0908d172..5b9c827d411c 100644
>> --- a/drivers/mtd/spi-nor/core.c
>> +++ b/drivers/mtd/spi-nor/core.c
>> @@ -2115,7 +2115,7 @@ static int spi_nor_spimem_check_op(struct spi_nor *nor,
>> */
>> op->addr.nbytes = 4;
>> if (!spi_mem_supports_op(nor->spimem, op)) {
>> - if (nor->mtd.size > SZ_16M)
>> + if (nor->params->size > SZ_16M)
>> return -EOPNOTSUPP;
>>
>> /* If flash size <= 16MB, 3 address bytes are sufficient */
>> @@ -3011,7 +3011,7 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
>> nor->addr_width = 3;
>> }
>>
>> - if (nor->addr_width == 3 && nor->mtd.size > 0x1000000) {
>> + if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
>> /* enable 4-byte addressing if the device exceeds 16MiB */
>> nor->addr_width = 4;
>> }
>> @@ -3245,7 +3245,7 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor)
>> SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
>> SPI_MEM_OP_DATA_IN(0, NULL, 0)),
>> .offset = 0,
>> - .length = nor->mtd.size,
>> + .length = nor->params->size,
>> };
>> struct spi_mem_op *op = &info.op_tmpl;
>>
>> @@ -3276,7 +3276,7 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor)
>> SPI_MEM_OP_NO_DUMMY,
>> SPI_MEM_OP_DATA_OUT(0, NULL, 0)),
>> .offset = 0,
>> - .length = nor->mtd.size,
>> + .length = nor->params->size,
>> };
>> struct spi_mem_op *op = &info.op_tmpl;
>>
>> --
>> 2.25.1
>>
>
> --
> Regards,
> Pratyush Yadav
> Texas Instruments Inc.
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 01/13] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls
@ 2021-12-03 12:03 ` Tudor.Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor.Ambarus @ 2021-12-03 12:03 UTC (permalink / raw)
To: p.yadav
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, michael, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, figgyc, mail, zhengxunli
On 11/30/21 11:56 AM, Pratyush Yadav wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 22/11/21 11:50AM, Tudor Ambarus wrote:
>> Use NOR parameters in the probe's sequence of calls, thus
>> nor->params->size instead of nor->mtd.size and let the mtd_info
>> fields be used by the mtd calls (mtd->_erase, mtd->_read, mtd->_write).
>> mtd_info fields should not be used during probe because we haven't
>> registered mtd yet.
>
> These changes look good to me, but there is one thing this seems to be
> missing. In xlinx.c, I see that xilinx_setup() sets nor->mtd.size. I
> think it should be updated to set nor->params->size instead otherwise
thanks, you're correct. But I should better do it as a separate patch
that fixes:
Fixes: 641edddb4f43 ("mtd: spi-nor: Add s3an_post_sfdp_fixups()")
because mtd->size is overwritten in that patch with
mtd->size = params->size;
while it should have kept its s3an specific value.
Will respin the entire series with this change as the first patch.
> functions like spi_nor_set_addr_width() might end up using the wrong
> value.
>
>>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>
>> ---
>> v4: new patch
>>
>> drivers/mtd/spi-nor/core.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
>> index 88dd0908d172..5b9c827d411c 100644
>> --- a/drivers/mtd/spi-nor/core.c
>> +++ b/drivers/mtd/spi-nor/core.c
>> @@ -2115,7 +2115,7 @@ static int spi_nor_spimem_check_op(struct spi_nor *nor,
>> */
>> op->addr.nbytes = 4;
>> if (!spi_mem_supports_op(nor->spimem, op)) {
>> - if (nor->mtd.size > SZ_16M)
>> + if (nor->params->size > SZ_16M)
>> return -EOPNOTSUPP;
>>
>> /* If flash size <= 16MB, 3 address bytes are sufficient */
>> @@ -3011,7 +3011,7 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
>> nor->addr_width = 3;
>> }
>>
>> - if (nor->addr_width == 3 && nor->mtd.size > 0x1000000) {
>> + if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
>> /* enable 4-byte addressing if the device exceeds 16MiB */
>> nor->addr_width = 4;
>> }
>> @@ -3245,7 +3245,7 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor)
>> SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
>> SPI_MEM_OP_DATA_IN(0, NULL, 0)),
>> .offset = 0,
>> - .length = nor->mtd.size,
>> + .length = nor->params->size,
>> };
>> struct spi_mem_op *op = &info.op_tmpl;
>>
>> @@ -3276,7 +3276,7 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor)
>> SPI_MEM_OP_NO_DUMMY,
>> SPI_MEM_OP_DATA_OUT(0, NULL, 0)),
>> .offset = 0,
>> - .length = nor->mtd.size,
>> + .length = nor->params->size,
>> };
>> struct spi_mem_op *op = &info.op_tmpl;
>>
>> --
>> 2.25.1
>>
>
> --
> Regards,
> Pratyush Yadav
> Texas Instruments Inc.
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 02/13] mtd: spi-nor: Introduce spi_nor_set_mtd_info()
2021-12-02 9:19 ` Pratyush Yadav
@ 2021-12-03 12:03 ` Tudor.Ambarus
-1 siblings, 0 replies; 50+ messages in thread
From: Tudor.Ambarus @ 2021-12-03 12:03 UTC (permalink / raw)
To: p.yadav
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, Nicolas.Ferre, michael, linux-mtd, linux-arm-kernel,
code, miquel.raynal, heiko.thiery, sr, mail, zhengxunli
On 12/2/21 11:19 AM, Pratyush Yadav wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 22/11/21 11:50AM, Tudor Ambarus wrote:
>> Used to init all the mtd_info fields. Move the mtd_info init
>> the last thing in the spi_nor_scan(), so that we avoid superfluous
>> initialization of the mtd_info fields in case of errors.
>>
>> While here use common naming scheme for functions that are setting
>> mtd_info fields:
>> s/spi_nor_register_locking_ops/spi_nor_set_mtd_locking_ops
>> s/spi_nor_otp_init/spi_nor_set_mtd_otp_ops
>> The functions names are self explanatory, get rid of the comment
>> for the OTP function.
>>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>> Reviewed-by: Michael Walle <michael@walle.cc>
>
> I am not particularly happy with spi_nor_try_unlock_all() using
> nor->mtd, but I can live with it.
>
> Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
>
> One small nitpick below.
>
>>
>> - /* Configure OTP parameters and ops */
>> - spi_nor_otp_init(nor);
>> + /* No mtd_info fields are used up to this point. */
>
> How about "No mtd_info fields should be used up to this point" so we
> give the programmer a command to not use mtd_info fields rather than
> just stating a fact.
ok, will do.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH v4 02/13] mtd: spi-nor: Introduce spi_nor_set_mtd_info()
@ 2021-12-03 12:03 ` Tudor.Ambarus
0 siblings, 0 replies; 50+ messages in thread
From: Tudor.Ambarus @ 2021-12-03 12:03 UTC (permalink / raw)
To: p.yadav
Cc: macromorgan, vigneshr, jaimeliao, richard, esben, linux,
knaerzche, michael, linux-mtd, linux-arm-kernel, code,
miquel.raynal, heiko.thiery, sr, figgyc, mail, zhengxunli
On 12/2/21 11:19 AM, Pratyush Yadav wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 22/11/21 11:50AM, Tudor Ambarus wrote:
>> Used to init all the mtd_info fields. Move the mtd_info init
>> the last thing in the spi_nor_scan(), so that we avoid superfluous
>> initialization of the mtd_info fields in case of errors.
>>
>> While here use common naming scheme for functions that are setting
>> mtd_info fields:
>> s/spi_nor_register_locking_ops/spi_nor_set_mtd_locking_ops
>> s/spi_nor_otp_init/spi_nor_set_mtd_otp_ops
>> The functions names are self explanatory, get rid of the comment
>> for the OTP function.
>>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>> Reviewed-by: Michael Walle <michael@walle.cc>
>
> I am not particularly happy with spi_nor_try_unlock_all() using
> nor->mtd, but I can live with it.
>
> Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
>
> One small nitpick below.
>
>>
>> - /* Configure OTP parameters and ops */
>> - spi_nor_otp_init(nor);
>> + /* No mtd_info fields are used up to this point. */
>
> How about "No mtd_info fields should be used up to this point" so we
> give the programmer a command to not use mtd_info fields rather than
> just stating a fact.
ok, will do.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 50+ messages in thread
end of thread, other threads:[~2021-12-03 12:07 UTC | newest]
Thread overview: 50+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-22 9:50 [PATCH v4 00/13] mtd: spi-nor: Clean params init Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-11-22 9:50 ` [PATCH v4 01/13] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-11-22 18:28 ` Michael Walle
2021-11-22 18:28 ` Michael Walle
2021-11-30 9:56 ` Pratyush Yadav
2021-11-30 9:56 ` Pratyush Yadav
2021-12-03 12:03 ` Tudor.Ambarus
2021-12-03 12:03 ` Tudor.Ambarus
2021-11-22 9:50 ` [PATCH v4 02/13] mtd: spi-nor: Introduce spi_nor_set_mtd_info() Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-12-02 9:19 ` Pratyush Yadav
2021-12-02 9:19 ` Pratyush Yadav
2021-12-03 12:03 ` Tudor.Ambarus
2021-12-03 12:03 ` Tudor.Ambarus
2021-11-22 9:50 ` [PATCH v4 03/13] mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is defined Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-12-02 9:31 ` Pratyush Yadav
2021-12-02 9:31 ` Pratyush Yadav
2021-11-22 9:50 ` [PATCH v4 04/13] mtd: spi-nor: core: Introduce flash_info mfr_flags Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-11-22 18:34 ` Michael Walle
2021-11-22 18:34 ` Michael Walle
2021-11-23 6:43 ` Tudor.Ambarus
2021-11-23 6:43 ` Tudor.Ambarus
2021-12-02 9:32 ` Pratyush Yadav
2021-12-02 9:32 ` Pratyush Yadav
2021-11-22 9:50 ` [PATCH v4 05/13] mtd: spi-nor: Rework the flash_info flags Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-12-02 10:01 ` Pratyush Yadav
2021-12-02 10:01 ` Pratyush Yadav
2021-11-22 9:50 ` [PATCH v4 06/13] mtd: spi-nor: Introduce spi_nor_init_flags() Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-11-22 9:50 ` [PATCH v4 07/13] mtd: spi-nor: Introduce spi_nor_init_fixup_flags() Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-11-22 9:50 ` [PATCH v4 08/13] mtd: spi-nor: core: Init all flash parameters based on SFDP where possible Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-11-22 9:50 ` [PATCH v4 09/13] mtd: spi-nor: core: Move spi_nor_set_addr_width() in spi_nor_setup() Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-11-22 9:50 ` [PATCH v4 10/13] mtd: spi-nor: winbond: w25q256jvm: Init flash based on SFDP Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-11-22 9:50 ` [PATCH v4 11/13] mtd: spi-nor: spansion: s25fl256s0: Skip SFDP parsing Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-11-22 9:50 ` [PATCH v4 12/13] mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
2021-11-22 18:19 ` Michael Walle
2021-11-22 18:19 ` Michael Walle
2021-11-22 9:50 ` [PATCH v4 13/13] mtd: spi-nor: issi: is25lp256: " Tudor Ambarus
2021-11-22 9:50 ` Tudor Ambarus
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.