* [PATCH 4.19 01/69] USB: serial: option: add Telit LE910S1 0x9200 composition
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 02/69] USB: serial: option: add Fibocom FM101-GL variants Greg Kroah-Hartman
` (74 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniele Palmas, Johan Hovold
From: Daniele Palmas <dnlplm@gmail.com>
commit e353f3e88720300c3d72f49a4bea54f42db1fa5e upstream.
Add the following Telit LE910S1 composition:
0x9200: tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20211119140319.10448-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1267,6 +1267,8 @@ static const struct usb_device_id option
.driver_info = NCTRL(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
.driver_info = NCTRL(0) | ZLP },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x9200), /* Telit LE910S1 flashing device */
+ .driver_info = NCTRL(0) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) },
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 02/69] USB: serial: option: add Fibocom FM101-GL variants
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 01/69] USB: serial: option: add Telit LE910S1 0x9200 composition Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 03/69] usb: dwc2: hcd_queue: Fix use of floating point literal Greg Kroah-Hartman
` (73 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mingjie Zhang, Johan Hovold
From: Mingjie Zhang <superzmj@fibocom.com>
commit 88459e3e42760abb2299bbf6cb1026491170e02a upstream.
Update the USB serial option driver support for the Fibocom
FM101-GL Cat.6
LTE modules as there are actually several different variants.
- VID:PID 2cb7:01a2, FM101-GL are laptop M.2 cards (with
MBIM interfaces for /Linux/Chrome OS)
- VID:PID 2cb7:01a4, FM101-GL for laptop debug M.2 cards(with adb
interface for /Linux/Chrome OS)
0x01a2: mbim, tty, tty, diag, gnss
0x01a4: mbim, diag, tty, adb, gnss, gnss
Here are the outputs of lsusb -v and usb-devices:
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 86 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2cb7 ProdID=01a2 Rev= 5.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom FM101-GL Module
S: SerialNumber=673326ce
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
Bus 002 Device 084: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x2cb7
idProduct 0x01a2
bcdDevice 5.04
iManufacturer 1 Fibocom Wireless Inc.
iProduct 2 Fibocom FM101-GL Module
iSerial 3 673326ce
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x015d
bNumInterfaces 6
bConfigurationValue 1
iConfiguration 4 MBIM_DUN_DUN_DIAG_NMEA
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 896mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 14
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 14
bInterfaceProtocol 0
iInterface 5 Fibocom FM101-GL LTE Modem
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC MBIM:
bcdMBIMVersion 1.00
wMaxControlMessage 4096
bNumberFilters 32
bMaxFilterSize 128
wMaxSegmentSize 2048
bmNetworkCapabilities 0x20
8-byte ntb input size
CDC MBIM Extended:
bcdMBIMExtendedVersion 1.00
bMaxOutstandingCommandMessages 64
wMTU 1500
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 9
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 6 MBIM Data
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8e EP 14 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 6
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0f EP 15 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 48
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 85 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2cb7 ProdID=01a4 Rev= 5.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom FM101-GL Module
S: SerialNumber=673326ce
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
Bus 002 Device 085: ID 2cb7:01a4 Fibocom Wireless Inc. Fibocom FM101-GL Module
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x2cb7
idProduct 0x01a4
bcdDevice 5.04
iManufacturer 1 Fibocom Wireless Inc.
iProduct 2 Fibocom FM101-GL Module
iSerial 3 673326ce
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0180
bNumInterfaces 7
bConfigurationValue 1
iConfiguration 4 MBIM_DIAG_DUN_ADB_GNSS_GNSS
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 896mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 14
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 14
bInterfaceProtocol 0
iInterface 5 Fibocom FM101-GL LTE Modem
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC MBIM:
bcdMBIMVersion 1.00
wMaxControlMessage 4096
bNumberFilters 32
bMaxFilterSize 128
wMaxSegmentSize 2048
bmNetworkCapabilities 0x20
8-byte ntb input size
CDC MBIM Extended:
bcdMBIMExtendedVersion 1.00
bMaxOutstandingCommandMessages 64
wMTU 1500
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 9
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 6 MBIM Data
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8e EP 14 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 6
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0f EP 15 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 48
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 66
bInterfaceProtocol 1
iInterface 8 ADB Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 6
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Signed-off-by: Mingjie Zhang <superzmj@fibocom.com>
Link: https://lore.kernel.org/r/20211123133757.37475-1-superzmj@fibocom.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2096,6 +2096,9 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */
{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */
+ .driver_info = RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 03/69] usb: dwc2: hcd_queue: Fix use of floating point literal
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 01/69] USB: serial: option: add Telit LE910S1 0x9200 composition Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 02/69] USB: serial: option: add Fibocom FM101-GL variants Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 04/69] usb: hub: Fix usb enumeration issue due to address0 race Greg Kroah-Hartman
` (72 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nick Desaulniers, John Keeping,
Minas Harutyunyan, Nathan Chancellor
From: Nathan Chancellor <nathan@kernel.org>
commit 310780e825f3ffd211b479b8f828885a6faedd63 upstream.
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).
drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
^
drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
^
1 error generated.
This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.
There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.
Link: https://github.com/ClangBuiltLinux/linux/issues/1497
Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83
Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc2/hcd_queue.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -59,7 +59,7 @@
#define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
/* If we get a NAK, wait this long before retrying */
-#define DWC2_RETRY_WAIT_DELAY 1*1E6L
+#define DWC2_RETRY_WAIT_DELAY (1 * NSEC_PER_MSEC)
/**
* dwc2_periodic_channel_available() - Checks that a channel is available for a
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 04/69] usb: hub: Fix usb enumeration issue due to address0 race
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 03/69] usb: dwc2: hcd_queue: Fix use of floating point literal Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 05/69] usb: hub: Fix locking issues with address0_mutex Greg Kroah-Hartman
` (71 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathias Nyman
From: Mathias Nyman <mathias.nyman@linux.intel.com>
commit 6ae6dc22d2d1ce6aa77a6da8a761e61aca216f8b upstream.
xHC hardware can only have one slot in default state with address 0
waiting for a unique address at a time, otherwise "undefined behavior
may occur" according to xhci spec 5.4.3.4
The address0_mutex exists to prevent this across both xhci roothubs.
If hub_port_init() fails, it may unlock the mutex and exit with a xhci
slot in default state. If the other xhci roothub calls hub_port_init()
at this point we end up with two slots in default state.
Make sure the address0_mutex protects the slot default state across
hub_port_init() retries, until slot is addressed or disabled.
Note, one known minor case is not fixed by this patch.
If device needs to be reset during resume, but fails all hub_port_init()
retries in usb_reset_and_verify_device(), then it's possible the slot is
still left in default state when address0_mutex is unlocked.
Cc: <stable@vger.kernel.org>
Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211115221630.871204-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/hub.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4575,8 +4575,6 @@ hub_port_init(struct usb_hub *hub, struc
if (oldspeed == USB_SPEED_LOW)
delay = HUB_LONG_RESET_TIME;
- mutex_lock(hcd->address0_mutex);
-
/* Reset the device; full speed may morph to high speed */
/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
retval = hub_port_reset(hub, port1, udev, delay, false);
@@ -4891,7 +4889,6 @@ fail:
hub_port_disable(hub, port1, 0);
update_devnum(udev, devnum); /* for disconnect processing */
}
- mutex_unlock(hcd->address0_mutex);
return retval;
}
@@ -5036,6 +5033,9 @@ static void hub_port_connect(struct usb_
unit_load = 100;
status = 0;
+
+ mutex_lock(hcd->address0_mutex);
+
for (i = 0; i < SET_CONFIG_TRIES; i++) {
/* reallocate for each attempt, since references
@@ -5072,6 +5072,8 @@ static void hub_port_connect(struct usb_
if (status < 0)
goto loop;
+ mutex_unlock(hcd->address0_mutex);
+
if (udev->quirks & USB_QUIRK_DELAY_INIT)
msleep(2000);
@@ -5160,6 +5162,7 @@ static void hub_port_connect(struct usb_
loop_disable:
hub_port_disable(hub, port1, 1);
+ mutex_lock(hcd->address0_mutex);
loop:
usb_ep0_reinit(udev);
release_devnum(udev);
@@ -5186,6 +5189,8 @@ loop:
}
done:
+ mutex_unlock(hcd->address0_mutex);
+
hub_port_disable(hub, port1, 1);
if (hcd->driver->relinquish_port && !hub->hdev->parent) {
if (status != -ENOTCONN && status != -ENODEV)
@@ -5722,6 +5727,8 @@ static int usb_reset_and_verify_device(s
bos = udev->bos;
udev->bos = NULL;
+ mutex_lock(hcd->address0_mutex);
+
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5731,6 +5738,7 @@ static int usb_reset_and_verify_device(s
if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
break;
}
+ mutex_unlock(hcd->address0_mutex);
if (ret < 0)
goto re_enumerate;
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 05/69] usb: hub: Fix locking issues with address0_mutex
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 04/69] usb: hub: Fix usb enumeration issue due to address0 race Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 06/69] binder: fix test regression due to sender_euid change Greg Kroah-Hartman
` (70 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Szyprowski, Hans de Goede,
Mathias Nyman
From: Mathias Nyman <mathias.nyman@linux.intel.com>
commit 6cca13de26eea6d32a98d96d916a048d16a12822 upstream.
Fix the circular lock dependency and unbalanced unlock of addess0_mutex
introduced when fixing an address0_mutex enumeration retry race in commit
ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race")
Make sure locking order between port_dev->status_lock and address0_mutex
is correct, and that address0_mutex is not unlocked in hub_port_connect
"done:" codepath which may be reached without locking address0_mutex
Fixes: 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race")
Cc: <stable@vger.kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211123101656.1113518-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/hub.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4978,6 +4978,7 @@ static void hub_port_connect(struct usb_
struct usb_port *port_dev = hub->ports[port1 - 1];
struct usb_device *udev = port_dev->child;
static int unreliable_port = -1;
+ bool retry_locked;
/* Disconnect any existing devices under this port */
if (udev) {
@@ -5034,9 +5035,10 @@ static void hub_port_connect(struct usb_
status = 0;
- mutex_lock(hcd->address0_mutex);
-
for (i = 0; i < SET_CONFIG_TRIES; i++) {
+ usb_lock_port(port_dev);
+ mutex_lock(hcd->address0_mutex);
+ retry_locked = true;
/* reallocate for each attempt, since references
* to the previous one can escape in various ways
@@ -5045,6 +5047,8 @@ static void hub_port_connect(struct usb_
if (!udev) {
dev_err(&port_dev->dev,
"couldn't allocate usb_device\n");
+ mutex_unlock(hcd->address0_mutex);
+ usb_unlock_port(port_dev);
goto done;
}
@@ -5066,13 +5070,13 @@ static void hub_port_connect(struct usb_
}
/* reset (non-USB 3.0 devices) and get descriptor */
- usb_lock_port(port_dev);
status = hub_port_init(hub, udev, port1, i);
- usb_unlock_port(port_dev);
if (status < 0)
goto loop;
mutex_unlock(hcd->address0_mutex);
+ usb_unlock_port(port_dev);
+ retry_locked = false;
if (udev->quirks & USB_QUIRK_DELAY_INIT)
msleep(2000);
@@ -5162,11 +5166,14 @@ static void hub_port_connect(struct usb_
loop_disable:
hub_port_disable(hub, port1, 1);
- mutex_lock(hcd->address0_mutex);
loop:
usb_ep0_reinit(udev);
release_devnum(udev);
hub_free_dev(udev);
+ if (retry_locked) {
+ mutex_unlock(hcd->address0_mutex);
+ usb_unlock_port(port_dev);
+ }
usb_put_dev(udev);
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
break;
@@ -5189,8 +5196,6 @@ loop:
}
done:
- mutex_unlock(hcd->address0_mutex);
-
hub_port_disable(hub, port1, 1);
if (hcd->driver->relinquish_port && !hub->hdev->parent) {
if (status != -ENOTCONN && status != -ENODEV)
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 06/69] binder: fix test regression due to sender_euid change
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 05/69] usb: hub: Fix locking issues with address0_mutex Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 07/69] ALSA: ctxfi: Fix out-of-range access Greg Kroah-Hartman
` (69 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Christian Brauner, Todd Kjos
From: Todd Kjos <tkjos@google.com>
commit c21a80ca0684ec2910344d72556c816cb8940c01 upstream.
This is a partial revert of commit
29bc22ac5e5b ("binder: use euid from cred instead of using task").
Setting sender_euid using proc->cred caused some Android system test
regressions that need further investigation. It is a partial
reversion because subsequent patches rely on proc->cred.
Fixes: 29bc22ac5e5b ("binder: use euid from cred instead of using task")
Cc: stable@vger.kernel.org # 4.4+
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Change-Id: I9b1769a3510fed250bb21859ef8beebabe034c66
Link: https://lore.kernel.org/r/20211112180720.2858135-1-tkjos@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/android/binder.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -2966,7 +2966,7 @@ static void binder_transaction(struct bi
t->from = thread;
else
t->from = NULL;
- t->sender_euid = proc->cred->euid;
+ t->sender_euid = task_euid(proc->tsk);
t->to_proc = target_proc;
t->to_thread = target_thread;
t->code = tr->code;
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 07/69] ALSA: ctxfi: Fix out-of-range access
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 06/69] binder: fix test regression due to sender_euid change Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 08/69] media: cec: copy sequence field for the reply Greg Kroah-Hartman
` (68 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 76c47183224c86e4011048b80f0e2d0d166f01c2 upstream.
The master and next_conj of rcs_ops are used for iterating the
resource list entries, and currently those are supposed to return the
current value. The problem is that next_conf may go over the last
entry before the loop abort condition is evaluated, and it may return
the "current" value that is beyond the array size. It was caught
recently as a GPF, for example.
Those return values are, however, never actually evaluated, hence
basically we don't have to consider the current value as the return at
all. By dropping those return values, the potential out-of-range
access above is also fixed automatically.
This patch changes the return type of master and next_conj callbacks
to void and drop the superfluous code accordingly.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214985
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211118215729.26257-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/ctxfi/ctamixer.c | 14 ++++++--------
sound/pci/ctxfi/ctdaio.c | 16 ++++++++--------
sound/pci/ctxfi/ctresource.c | 7 +++----
sound/pci/ctxfi/ctresource.h | 4 ++--
sound/pci/ctxfi/ctsrc.c | 7 +++----
5 files changed, 22 insertions(+), 26 deletions(-)
--- a/sound/pci/ctxfi/ctamixer.c
+++ b/sound/pci/ctxfi/ctamixer.c
@@ -27,16 +27,15 @@
#define BLANK_SLOT 4094
-static int amixer_master(struct rsc *rsc)
+static void amixer_master(struct rsc *rsc)
{
rsc->conj = 0;
- return rsc->idx = container_of(rsc, struct amixer, rsc)->idx[0];
+ rsc->idx = container_of(rsc, struct amixer, rsc)->idx[0];
}
-static int amixer_next_conj(struct rsc *rsc)
+static void amixer_next_conj(struct rsc *rsc)
{
rsc->conj++;
- return container_of(rsc, struct amixer, rsc)->idx[rsc->conj];
}
static int amixer_index(const struct rsc *rsc)
@@ -335,16 +334,15 @@ int amixer_mgr_destroy(struct amixer_mgr
/* SUM resource management */
-static int sum_master(struct rsc *rsc)
+static void sum_master(struct rsc *rsc)
{
rsc->conj = 0;
- return rsc->idx = container_of(rsc, struct sum, rsc)->idx[0];
+ rsc->idx = container_of(rsc, struct sum, rsc)->idx[0];
}
-static int sum_next_conj(struct rsc *rsc)
+static void sum_next_conj(struct rsc *rsc)
{
rsc->conj++;
- return container_of(rsc, struct sum, rsc)->idx[rsc->conj];
}
static int sum_index(const struct rsc *rsc)
--- a/sound/pci/ctxfi/ctdaio.c
+++ b/sound/pci/ctxfi/ctdaio.c
@@ -55,12 +55,12 @@ static struct daio_rsc_idx idx_20k2[NUM_
[SPDIFIO] = {.left = 0x05, .right = 0x85},
};
-static int daio_master(struct rsc *rsc)
+static void daio_master(struct rsc *rsc)
{
/* Actually, this is not the resource index of DAIO.
* For DAO, it is the input mapper index. And, for DAI,
* it is the output time-slot index. */
- return rsc->conj = rsc->idx;
+ rsc->conj = rsc->idx;
}
static int daio_index(const struct rsc *rsc)
@@ -68,19 +68,19 @@ static int daio_index(const struct rsc *
return rsc->conj;
}
-static int daio_out_next_conj(struct rsc *rsc)
+static void daio_out_next_conj(struct rsc *rsc)
{
- return rsc->conj += 2;
+ rsc->conj += 2;
}
-static int daio_in_next_conj_20k1(struct rsc *rsc)
+static void daio_in_next_conj_20k1(struct rsc *rsc)
{
- return rsc->conj += 0x200;
+ rsc->conj += 0x200;
}
-static int daio_in_next_conj_20k2(struct rsc *rsc)
+static void daio_in_next_conj_20k2(struct rsc *rsc)
{
- return rsc->conj += 0x100;
+ rsc->conj += 0x100;
}
static const struct rsc_ops daio_out_rsc_ops = {
--- a/sound/pci/ctxfi/ctresource.c
+++ b/sound/pci/ctxfi/ctresource.c
@@ -113,18 +113,17 @@ static int audio_ring_slot(const struct
return (rsc->conj << 4) + offset_in_audio_slot_block[rsc->type];
}
-static int rsc_next_conj(struct rsc *rsc)
+static void rsc_next_conj(struct rsc *rsc)
{
unsigned int i;
for (i = 0; (i < 8) && (!(rsc->msr & (0x1 << i))); )
i++;
rsc->conj += (AUDIO_SLOT_BLOCK_NUM >> i);
- return rsc->conj;
}
-static int rsc_master(struct rsc *rsc)
+static void rsc_master(struct rsc *rsc)
{
- return rsc->conj = rsc->idx;
+ rsc->conj = rsc->idx;
}
static const struct rsc_ops rsc_generic_ops = {
--- a/sound/pci/ctxfi/ctresource.h
+++ b/sound/pci/ctxfi/ctresource.h
@@ -43,8 +43,8 @@ struct rsc {
};
struct rsc_ops {
- int (*master)(struct rsc *rsc); /* Move to master resource */
- int (*next_conj)(struct rsc *rsc); /* Move to next conjugate resource */
+ void (*master)(struct rsc *rsc); /* Move to master resource */
+ void (*next_conj)(struct rsc *rsc); /* Move to next conjugate resource */
int (*index)(const struct rsc *rsc); /* Return the index of resource */
/* Return the output slot number */
int (*output_slot)(const struct rsc *rsc);
--- a/sound/pci/ctxfi/ctsrc.c
+++ b/sound/pci/ctxfi/ctsrc.c
@@ -594,16 +594,15 @@ int src_mgr_destroy(struct src_mgr *src_
/* SRCIMP resource manager operations */
-static int srcimp_master(struct rsc *rsc)
+static void srcimp_master(struct rsc *rsc)
{
rsc->conj = 0;
- return rsc->idx = container_of(rsc, struct srcimp, rsc)->idx[0];
+ rsc->idx = container_of(rsc, struct srcimp, rsc)->idx[0];
}
-static int srcimp_next_conj(struct rsc *rsc)
+static void srcimp_next_conj(struct rsc *rsc)
{
rsc->conj++;
- return container_of(rsc, struct srcimp, rsc)->idx[rsc->conj];
}
static int srcimp_index(const struct rsc *rsc)
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 08/69] media: cec: copy sequence field for the reply
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 07/69] ALSA: ctxfi: Fix out-of-range access Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 09/69] HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts Greg Kroah-Hartman
` (67 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans Verkuil, Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
commit 13cbaa4c2b7bf9f8285e1164d005dbf08244ecd5 upstream.
When the reply for a non-blocking transmit arrives, the sequence
field for that reply was never filled in, so userspace would have no
way of associating the reply to the original transmit.
Copy the sequence field to ensure that this is now possible.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0dbacebede1e ([media] cec: move the CEC framework out of staging and to media)
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/cec/cec-adap.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/media/cec/cec-adap.c
+++ b/drivers/media/cec/cec-adap.c
@@ -1146,6 +1146,7 @@ void cec_received_msg_ts(struct cec_adap
if (abort)
dst->rx_status |= CEC_RX_STATUS_FEATURE_ABORT;
msg->flags = dst->flags;
+ msg->sequence = dst->sequence;
/* Remove it from the wait_queue */
list_del_init(&data->list);
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 09/69] HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 08/69] media: cec: copy sequence field for the reply Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 10/69] staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect() Greg Kroah-Hartman
` (66 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason Gerecke, Joshua Dickens, Jiri Kosina
From: Jason Gerecke <killertofu@gmail.com>
commit 7fb0413baa7f8a04caef0c504df9af7e0623d296 upstream.
The HID descriptor of many of Wacom's touch input devices include a
"Confidence" usage that signals if a particular touch collection contains
useful data. The driver does not look at this flag, however, which causes
even invalid contacts to be reported to userspace. A lucky combination of
kernel event filtering and device behavior (specifically: contact ID 0 ==
invalid, contact ID >0 == valid; and order all data so that all valid
contacts are reported before any invalid contacts) spare most devices from
any visibly-bad behavior.
The DTH-2452 is one example of an unlucky device that misbehaves. It uses
ID 0 for both the first valid contact and all invalid contacts. Because
we report both the valid and invalid contacts, the kernel reports that
contact 0 first goes down (valid) and then goes up (invalid) in every
report. This causes ~100 clicks per second simply by touching the screen.
This patch inroduces new `confidence` flag in our `hid_data` structure.
The value is initially set to `true` at the start of a report and can be
set to `false` if an invalid touch usage is seen.
Link: https://github.com/linuxwacom/input-wacom/issues/270
Fixes: f8b6a74719b5 ("HID: wacom: generic: Support multiple tools per report")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/wacom_wac.c | 8 +++++++-
drivers/hid/wacom_wac.h | 1 +
2 files changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2538,6 +2538,9 @@ static void wacom_wac_finger_event(struc
struct wacom_features *features = &wacom->wacom_wac.features;
switch (equivalent_usage) {
+ case HID_DG_CONFIDENCE:
+ wacom_wac->hid_data.confidence = value;
+ break;
case HID_GD_X:
wacom_wac->hid_data.x = value;
break;
@@ -2568,7 +2571,8 @@ static void wacom_wac_finger_event(struc
if (usage->usage_index + 1 == field->report_count) {
- if (equivalent_usage == wacom_wac->hid_data.last_slot_field)
+ if (equivalent_usage == wacom_wac->hid_data.last_slot_field &&
+ wacom_wac->hid_data.confidence)
wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input);
}
}
@@ -2581,6 +2585,8 @@ static void wacom_wac_finger_pre_report(
struct hid_data* hid_data = &wacom_wac->hid_data;
int i;
+ hid_data->confidence = true;
+
for (i = 0; i < report->maxfield; i++) {
struct hid_field *field = report->field[i];
int j;
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -302,6 +302,7 @@ struct hid_data {
bool tipswitch;
bool barrelswitch;
bool barrelswitch2;
+ bool confidence;
int x;
int y;
int pressure;
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 10/69] staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 09/69] HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 11/69] fuse: fix page stealing Greg Kroah-Hartman
` (65 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter
From: Dan Carpenter <dan.carpenter@oracle.com>
commit b535917c51acc97fb0761b1edec85f1f3d02bda4 upstream.
The free_rtllib() function frees the "dev" pointer so there is use
after free on the next line. Re-arrange things to avoid that.
Fixes: 66898177e7e5 ("staging: rtl8192e: Fix unload/reload problem")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211117072016.GA5237@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -2579,13 +2579,14 @@ static void _rtl92e_pci_disconnect(struc
free_irq(dev->irq, dev);
priv->irq = 0;
}
- free_rtllib(dev);
if (dev->mem_start != 0) {
iounmap((void __iomem *)dev->mem_start);
release_mem_region(pci_resource_start(pdev, 1),
pci_resource_len(pdev, 1));
}
+
+ free_rtllib(dev);
} else {
priv = rtllib_priv(dev);
}
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 11/69] fuse: fix page stealing
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 10/69] staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect() Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 12/69] xen: dont continue xenstore initialization in case of errors Greg Kroah-Hartman
` (64 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Frank Dinoff, Miklos Szeredi
From: Miklos Szeredi <mszeredi@redhat.com>
commit 712a951025c0667ff00b25afc360f74e639dfabe upstream.
It is possible to trigger a crash by splicing anon pipe bufs to the fuse
device.
The reason for this is that anon_pipe_buf_release() will reuse buf->page if
the refcount is 1, but that page might have already been stolen and its
flags modified (e.g. PG_lru added).
This happens in the unlikely case of fuse_dev_splice_write() getting around
to calling pipe_buf_release() after a page has been stolen, added to the
page cache and removed from the page cache.
Fix by calling pipe_buf_release() right after the page was inserted into
the page cache. In this case the page has an elevated refcount so any
release function will know that the page isn't reusable.
Reported-by: Frank Dinoff <fdinoff@google.com>
Link: https://lore.kernel.org/r/CAAmZXrsGg2xsP1CK+cbuEMumtrqdvD-NKnWzhNcvn71RV3c1yw@mail.gmail.com/
Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device")
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/fuse/dev.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -905,6 +905,12 @@ static int fuse_try_move_page(struct fus
goto out_put_old;
}
+ /*
+ * Release while we have extra ref on stolen page. Otherwise
+ * anon_pipe_buf_release() might think the page can be reused.
+ */
+ pipe_buf_release(cs->pipe, buf);
+
get_page(newpage);
if (!(buf->flags & PIPE_BUF_FLAG_LRU))
@@ -2054,8 +2060,12 @@ static ssize_t fuse_dev_splice_write(str
pipe_lock(pipe);
out_free:
- for (idx = 0; idx < nbuf; idx++)
- pipe_buf_release(pipe, &bufs[idx]);
+ for (idx = 0; idx < nbuf; idx++) {
+ struct pipe_buffer *buf = &bufs[idx];
+
+ if (buf->ops)
+ pipe_buf_release(pipe, buf);
+ }
pipe_unlock(pipe);
kvfree(bufs);
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 12/69] xen: dont continue xenstore initialization in case of errors
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 11/69] fuse: fix page stealing Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 13/69] xen: detect uninitialized xenbus in xenbus_init Greg Kroah-Hartman
` (63 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stable, jbeulich, Stefano Stabellini,
Boris Ostrovsky
From: Stefano Stabellini <stefano.stabellini@xilinx.com>
commit 08f6c2b09ebd4b326dbe96d13f94fee8f9814c78 upstream.
In case of errors in xenbus_init (e.g. missing xen_store_gfn parameter),
we goto out_error but we forget to reset xen_store_domain_type to
XS_UNKNOWN. As a consequence xenbus_probe_initcall and other initcalls
will still try to initialize xenstore resulting into a crash at boot.
[ 2.479830] Call trace:
[ 2.482314] xb_init_comms+0x18/0x150
[ 2.486354] xs_init+0x34/0x138
[ 2.489786] xenbus_probe+0x4c/0x70
[ 2.498432] xenbus_probe_initcall+0x2c/0x7c
[ 2.503944] do_one_initcall+0x54/0x1b8
[ 2.507358] kernel_init_freeable+0x1ac/0x210
[ 2.511617] kernel_init+0x28/0x130
[ 2.516112] ret_from_fork+0x10/0x20
Cc: <Stable@vger.kernel.org>
Cc: jbeulich@suse.com
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Link: https://lore.kernel.org/r/20211115222719.2558207-1-sstabellini@kernel.org
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/xen/xenbus/xenbus_probe.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -846,7 +846,7 @@ static struct notifier_block xenbus_resu
static int __init xenbus_init(void)
{
- int err = 0;
+ int err;
uint64_t v = 0;
xen_store_domain_type = XS_UNKNOWN;
@@ -920,8 +920,10 @@ static int __init xenbus_init(void)
*/
proc_create_mount_point("xen");
#endif
+ return 0;
out_error:
+ xen_store_domain_type = XS_UNKNOWN;
return err;
}
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 13/69] xen: detect uninitialized xenbus in xenbus_init
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 12/69] xen: dont continue xenstore initialization in case of errors Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 14/69] tracing: Fix pid filtering when triggers are attached Greg Kroah-Hartman
` (62 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stefano Stabellini, Juergen Gross,
Jan Beulich, Boris Ostrovsky
From: Stefano Stabellini <stefano.stabellini@xilinx.com>
commit 36e8f60f0867d3b70d398d653c17108459a04efe upstream.
If the xenstore page hasn't been allocated properly, reading the value
of the related hvm_param (HVM_PARAM_STORE_PFN) won't actually return
error. Instead, it will succeed and return zero. Instead of attempting
to xen_remap a bad guest physical address, detect this condition and
return early.
Note that although a guest physical address of zero for
HVM_PARAM_STORE_PFN is theoretically possible, it is not a good choice
and zero has never been validly used in that capacity.
Also recognize all bits set as an invalid value.
For 32-bit Linux, any pfn above ULONG_MAX would get truncated. Pfns
above ULONG_MAX should never be passed by the Xen tools to HVM guests
anyway, so check for this condition and return early.
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20211123210748.1910236-1-sstabellini@kernel.org
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/xen/xenbus/xenbus_probe.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -886,6 +886,29 @@ static int __init xenbus_init(void)
err = hvm_get_parameter(HVM_PARAM_STORE_PFN, &v);
if (err)
goto out_error;
+ /*
+ * Uninitialized hvm_params are zero and return no error.
+ * Although it is theoretically possible to have
+ * HVM_PARAM_STORE_PFN set to zero on purpose, in reality it is
+ * not zero when valid. If zero, it means that Xenstore hasn't
+ * been properly initialized. Instead of attempting to map a
+ * wrong guest physical address return error.
+ *
+ * Also recognize all bits set as an invalid value.
+ */
+ if (!v || !~v) {
+ err = -ENOENT;
+ goto out_error;
+ }
+ /* Avoid truncation on 32-bit. */
+#if BITS_PER_LONG == 32
+ if (v > ULONG_MAX) {
+ pr_err("%s: cannot handle HVM_PARAM_STORE_PFN=%llx > ULONG_MAX\n",
+ __func__, v);
+ err = -EINVAL;
+ goto out_error;
+ }
+#endif
xen_store_gfn = (unsigned long)v;
xen_store_interface =
xen_remap(xen_store_gfn << XEN_PAGE_SHIFT,
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 14/69] tracing: Fix pid filtering when triggers are attached
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 13/69] xen: detect uninitialized xenbus in xenbus_init Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 15/69] xtensa: use CONFIG_USE_OF instead of CONFIG_OF Greg Kroah-Hartman
` (61 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Steven Rostedt (VMware)
From: Steven Rostedt (VMware) <rostedt@goodmis.org>
commit a55f224ff5f238013de8762c4287117e47b86e22 upstream.
If a event is filtered by pid and a trigger that requires processing of
the event to happen is a attached to the event, the discard portion does
not take the pid filtering into account, and the event will then be
recorded when it should not have been.
Cc: stable@vger.kernel.org
Fixes: 3fdaf80f4a836 ("tracing: Implement event pid filtering")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/trace.h | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -1365,14 +1365,26 @@ __event_trigger_test_discard(struct trac
if (eflags & EVENT_FILE_FL_TRIGGER_COND)
*tt = event_triggers_call(file, entry, event);
- if (test_bit(EVENT_FILE_FL_SOFT_DISABLED_BIT, &file->flags) ||
- (unlikely(file->flags & EVENT_FILE_FL_FILTERED) &&
- !filter_match_preds(file->filter, entry))) {
- __trace_event_discard_commit(buffer, event);
- return true;
- }
+ if (likely(!(file->flags & (EVENT_FILE_FL_SOFT_DISABLED |
+ EVENT_FILE_FL_FILTERED |
+ EVENT_FILE_FL_PID_FILTER))))
+ return false;
+
+ if (file->flags & EVENT_FILE_FL_SOFT_DISABLED)
+ goto discard;
+
+ if (file->flags & EVENT_FILE_FL_FILTERED &&
+ !filter_match_preds(file->filter, entry))
+ goto discard;
+
+ if ((file->flags & EVENT_FILE_FL_PID_FILTER) &&
+ trace_event_ignore_this_pid(file))
+ goto discard;
return false;
+ discard:
+ __trace_event_discard_commit(buffer, event);
+ return true;
}
/**
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 15/69] xtensa: use CONFIG_USE_OF instead of CONFIG_OF
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 14/69] tracing: Fix pid filtering when triggers are attached Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 16/69] proc/vmcore: fix clearing user buffer by properly using clear_user() Greg Kroah-Hartman
` (60 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Randy Dunlap, Max Filippov
From: Randy Dunlap <rdunlap@infradead.org>
commit d67ed2510d28a1eb33171010d35cf52178cfcbdd upstream.
CONFIG_OF can be set by a randconfig or by a user -- without setting the
early flattree option (OF_EARLY_FLATTREE). This causes build errors.
However, if randconfig or a user sets USE_OF in the Xtensa config,
the right kconfig symbols are set to fix the build.
Fixes these build errors:
../arch/xtensa/kernel/setup.c:67:19: error: ‘__dtb_start’ undeclared here (not in a function); did you mean ‘dtb_start’?
67 | void *dtb_start = __dtb_start;
| ^~~~~~~~~~~
../arch/xtensa/kernel/setup.c: In function 'xtensa_dt_io_area':
../arch/xtensa/kernel/setup.c:201:14: error: implicit declaration of function 'of_flat_dt_is_compatible'; did you mean 'of_machine_is_compatible'? [-Werror=implicit-function-declaration]
201 | if (!of_flat_dt_is_compatible(node, "simple-bus"))
../arch/xtensa/kernel/setup.c:204:18: error: implicit declaration of function 'of_get_flat_dt_prop' [-Werror=implicit-function-declaration]
204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
../arch/xtensa/kernel/setup.c:204:16: error: assignment to 'const __be32 *' {aka 'const unsigned int *'} from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
| ^
../arch/xtensa/kernel/setup.c: In function 'early_init_devtree':
../arch/xtensa/kernel/setup.c:228:9: error: implicit declaration of function 'early_init_dt_scan'; did you mean 'early_init_devtree'? [-Werror=implicit-function-declaration]
228 | early_init_dt_scan(params);
../arch/xtensa/kernel/setup.c:229:9: error: implicit declaration of function 'of_scan_flat_dt' [-Werror=implicit-function-declaration]
229 | of_scan_flat_dt(xtensa_dt_io_area, NULL);
xtensa-elf-ld: arch/xtensa/mm/mmu.o:(.text+0x0): undefined reference to `xtensa_kio_paddr'
Fixes: da844a81779e ("xtensa: add device trees support")
Fixes: 6cb971114f63 ("xtensa: remap io area defined in device tree")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/xtensa/include/asm/vectors.h | 2 +-
arch/xtensa/kernel/setup.c | 12 ++++++------
arch/xtensa/mm/mmu.c | 2 +-
3 files changed, 8 insertions(+), 8 deletions(-)
--- a/arch/xtensa/include/asm/vectors.h
+++ b/arch/xtensa/include/asm/vectors.h
@@ -31,7 +31,7 @@
#endif
#define XCHAL_KIO_SIZE 0x10000000
-#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_OF)
+#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_USE_OF)
#define XCHAL_KIO_PADDR xtensa_get_kio_paddr()
#ifndef __ASSEMBLY__
extern unsigned long xtensa_kio_paddr;
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -65,7 +65,7 @@ int initrd_is_mapped = 0;
extern int initrd_below_start_ok;
#endif
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
void *dtb_start = __dtb_start;
#endif
@@ -127,7 +127,7 @@ __tagtable(BP_TAG_INITRD, parse_tag_init
#endif /* CONFIG_BLK_DEV_INITRD */
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
static int __init parse_tag_fdt(const bp_tag_t *tag)
{
@@ -137,7 +137,7 @@ static int __init parse_tag_fdt(const bp
__tagtable(BP_TAG_FDT, parse_tag_fdt);
-#endif /* CONFIG_OF */
+#endif /* CONFIG_USE_OF */
static int __init parse_tag_cmdline(const bp_tag_t* tag)
{
@@ -185,7 +185,7 @@ static int __init parse_bootparam(const
}
#endif
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
#if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY
unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
@@ -234,7 +234,7 @@ void __init early_init_devtree(void *par
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
}
-#endif /* CONFIG_OF */
+#endif /* CONFIG_USE_OF */
/*
* Initialize architecture. (Early stage)
@@ -255,7 +255,7 @@ void __init init_arch(bp_tag_t *bp_start
if (bp_start)
parse_bootparam(bp_start);
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
early_init_devtree(dtb_start);
#endif
--- a/arch/xtensa/mm/mmu.c
+++ b/arch/xtensa/mm/mmu.c
@@ -98,7 +98,7 @@ void init_mmu(void)
void init_kio(void)
{
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
+#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_USE_OF)
/*
* Update the IO area mapping in case xtensa_kio_paddr has changed
*/
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 16/69] proc/vmcore: fix clearing user buffer by properly using clear_user()
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 4.19 15/69] xtensa: use CONFIG_USE_OF instead of CONFIG_OF Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` Greg Kroah-Hartman
` (59 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Hildenbrand, Baoquan He,
Dave Young, Vivek Goyal, Philipp Rudo, Andrew Morton,
Linus Torvalds
From: David Hildenbrand <david@redhat.com>
commit c1e63117711977cc4295b2ce73de29dd17066c82 upstream.
To clear a user buffer we cannot simply use memset, we have to use
clear_user(). With a virtio-mem device that registers a vmcore_cb and
has some logically unplugged memory inside an added Linux memory block,
I can easily trigger a BUG by copying the vmcore via "cp":
systemd[1]: Starting Kdump Vmcore Save Service...
kdump[420]: Kdump is using the default log level(3).
kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
kdump[465]: saving vmcore-dmesg.txt complete
kdump[467]: saving vmcore
BUG: unable to handle page fault for address: 00007f2374e01000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867
Oops: 0003 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86
Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81
RSP: 0018:ffffc9000073be08 EFLAGS: 00010212
RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000
RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008
RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50
R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000
R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8
FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0
Call Trace:
read_vmcore+0x236/0x2c0
proc_reg_read+0x55/0xa0
vfs_read+0x95/0x190
ksys_read+0x4f/0xc0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access
Prevention (SMAP)", which is used to detect wrong access from the kernel
to user buffers like this: SMAP triggers a permissions violation on
wrong access. In the x86-64 variant of clear_user(), SMAP is properly
handled via clac()+stac().
To fix, properly use clear_user() when we're dealing with a user buffer.
Link: https://lkml.kernel.org/r/20211112092750.6921-1-david@redhat.com
Fixes: 997c136f518c ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/proc/vmcore.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -117,14 +117,19 @@ static ssize_t read_from_oldmem(char *bu
nr_bytes = count;
/* If pfn is not ram, return zeros for sparse dump files */
- if (pfn_is_ram(pfn) == 0)
- memset(buf, 0, nr_bytes);
- else {
+ if (pfn_is_ram(pfn) == 0) {
+ tmp = 0;
+ if (!userbuf)
+ memset(buf, 0, nr_bytes);
+ else if (clear_user(buf, nr_bytes))
+ tmp = -EFAULT;
+ } else {
tmp = copy_oldmem_page(pfn, buf, nr_bytes,
offset, userbuf);
- if (tmp < 0)
- return tmp;
}
+ if (tmp < 0)
+ return tmp;
+
*ppos += nr_bytes;
count -= nr_bytes;
buf += nr_bytes;
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 17/69] PCI: aardvark: Fix a leaked reference by adding missing of_node_put()
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 02/69] USB: serial: option: add Fibocom FM101-GL variants Greg Kroah-Hartman
` (74 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wen Yang, Lorenzo Pieralisi,
Thomas Petazzoni, Bjorn Helgaas, linux-pci, linux-arm-kernel,
Marek Behún
From: Wen Yang <wen.yang99@zte.com.cn>
commit 3842f5166bf1ef286fe7a39f262b5c9581308366 upstream.
The call to of_get_next_child() returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
irq_domain_add_linear() also calls of_node_get() to increase refcount,
so irq_domain will not be affected when it is released.
Detected by coccinelle with the following warnings:
./drivers/pci/controller/pci-aardvark.c:826:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 798, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -754,6 +754,7 @@ static int advk_pcie_init_irq_domain(str
struct device_node *node = dev->of_node;
struct device_node *pcie_intc_node;
struct irq_chip *irq_chip;
+ int ret = 0;
raw_spin_lock_init(&pcie->irq_lock);
@@ -768,8 +769,8 @@ static int advk_pcie_init_irq_domain(str
irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-irq",
dev_name(dev));
if (!irq_chip->name) {
- of_node_put(pcie_intc_node);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_put_node;
}
irq_chip->irq_mask = advk_pcie_irq_mask;
@@ -781,11 +782,13 @@ static int advk_pcie_init_irq_domain(str
&advk_pcie_irq_domain_ops, pcie);
if (!pcie->irq_domain) {
dev_err(dev, "Failed to get a INTx IRQ domain\n");
- of_node_put(pcie_intc_node);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_put_node;
}
- return 0;
+out_put_node:
+ of_node_put(pcie_intc_node);
+ return ret;
}
static void advk_pcie_remove_irq_domain(struct advk_pcie *pcie)
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 17/69] PCI: aardvark: Fix a leaked reference by adding missing of_node_put()
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
0 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wen Yang, Lorenzo Pieralisi,
Thomas Petazzoni, Bjorn Helgaas, linux-pci, linux-arm-kernel,
Marek Behún
From: Wen Yang <wen.yang99@zte.com.cn>
commit 3842f5166bf1ef286fe7a39f262b5c9581308366 upstream.
The call to of_get_next_child() returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
irq_domain_add_linear() also calls of_node_get() to increase refcount,
so irq_domain will not be affected when it is released.
Detected by coccinelle with the following warnings:
./drivers/pci/controller/pci-aardvark.c:826:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 798, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -754,6 +754,7 @@ static int advk_pcie_init_irq_domain(str
struct device_node *node = dev->of_node;
struct device_node *pcie_intc_node;
struct irq_chip *irq_chip;
+ int ret = 0;
raw_spin_lock_init(&pcie->irq_lock);
@@ -768,8 +769,8 @@ static int advk_pcie_init_irq_domain(str
irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-irq",
dev_name(dev));
if (!irq_chip->name) {
- of_node_put(pcie_intc_node);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_put_node;
}
irq_chip->irq_mask = advk_pcie_irq_mask;
@@ -781,11 +782,13 @@ static int advk_pcie_init_irq_domain(str
&advk_pcie_irq_domain_ops, pcie);
if (!pcie->irq_domain) {
dev_err(dev, "Failed to get a INTx IRQ domain\n");
- of_node_put(pcie_intc_node);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_put_node;
}
- return 0;
+out_put_node:
+ of_node_put(pcie_intc_node);
+ return ret;
}
static void advk_pcie_remove_irq_domain(struct advk_pcie *pcie)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 78+ messages in thread
* [PATCH 4.19 18/69] PCI: aardvark: Wait for endpoint to be ready before training link
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2021-11-29 18:17 ` Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 19/69] PCI: aardvark: Train link immediately after enabling training Greg Kroah-Hartman
` (57 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Remi Pommarel, Lorenzo Pieralisi,
Thomas Petazzoni, Marek Behún
From: Remi Pommarel <repk@triplefau.lt>
commit f4c7d053d7f77cd5c1a1ba7c7ce085ddba13d1d7 upstream.
When configuring pcie reset pin from gpio (e.g. initially set by
u-boot) to pcie function this pin goes low for a brief moment
asserting the PERST# signal. Thus connected device enters fundamental
reset process and link configuration can only begin after a minimal
100ms delay (see [1]).
Because the pin configuration comes from the "default" pinctrl it is
implicitly configured before the probe callback is called:
driver_probe_device()
really_probe()
...
pinctrl_bind_pins() /* Here pin goes from gpio to PCIE reset
function and PERST# is asserted */
...
drv->probe()
[1] "PCI Express Base Specification", REV. 4.0
PCI Express, February 19 2014, 6.6.1 Conventional Reset
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -318,6 +318,14 @@ static void advk_pcie_setup_hw(struct ad
reg |= PIO_CTRL_ADDR_WIN_DISABLE;
advk_writel(pcie, reg, PIO_CTRL);
+ /*
+ * PERST# signal could have been asserted by pinctrl subsystem before
+ * probe() callback has been called, making the endpoint going into
+ * fundamental reset. As required by PCI Express spec a delay for at
+ * least 100ms after such a reset before link training is needed.
+ */
+ msleep(PCI_PM_D3COLD_WAIT);
+
/* Start link training */
reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
reg |= PCIE_CORE_LINK_TRAINING;
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 19/69] PCI: aardvark: Train link immediately after enabling training
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 18/69] PCI: aardvark: Wait for endpoint to be ready before training link Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 20/69] PCI: aardvark: Improve link training Greg Kroah-Hartman
` (56 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tomasz Maciej Nowak, Pali Rohár,
Lorenzo Pieralisi, Rob Herring, Thomas Petazzoni,
Marek Behún
From: Pali Rohár <pali@kernel.org>
commit 6964494582f56a3882c2c53b0edbfe99eb32b2e1 upstream.
Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link
training and starting link training causes detection issues with some
buggy cards (such as Compex WLE900VX).
Move the code which enables link training immediately before the one
which starts link traning.
This fixes detection issues of Compex WLE900VX card on Turris MOX after
cold boot.
Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org
Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...")
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -280,11 +280,6 @@ static void advk_pcie_setup_hw(struct ad
reg |= LANE_COUNT_1;
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
- /* Enable link training */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg |= LINK_TRAINING_EN;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
/* Enable MSI */
reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
@@ -326,7 +321,15 @@ static void advk_pcie_setup_hw(struct ad
*/
msleep(PCI_PM_D3COLD_WAIT);
- /* Start link training */
+ /* Enable link training */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg |= LINK_TRAINING_EN;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /*
+ * Start link training immediately after enabling it.
+ * This solves problems for some buggy cards.
+ */
reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
reg |= PCIE_CORE_LINK_TRAINING;
advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 20/69] PCI: aardvark: Improve link training
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 19/69] PCI: aardvark: Train link immediately after enabling training Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 21/69] PCI: aardvark: Issue PERST via GPIO Greg Kroah-Hartman
` (55 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tomasz Maciej Nowak, Pali Rohár,
Marek Behún, Lorenzo Pieralisi, Rob Herring,
Thomas Petazzoni, Marek Behún
From: Marek Behún <marek.behun@nic.cz>
commit 43fc679ced18006b12d918d7a8a4af392b7fbfe7 upstream.
Currently the aardvark driver trains link in PCIe gen2 mode. This may
cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or
even not detected. Moreover when ASPM code tries to retrain link second
time, these cards may stop responding and link goes down. If gen1 is
used this does not happen.
Unconditionally forcing gen1 is not a good solution since it may have
performance impact on gen2 cards.
To overcome this, read 'max-link-speed' property (as defined in PCI
device tree bindings) and use this as max gen mode. Then iteratively try
link training at this mode or lower until successful. After successful
link training choose final controller gen based on Negotiated Link Speed
from Link Status register, which should match card speed.
Link: https://lore.kernel.org/r/20200430080625.26070-5-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 114 ++++++++++++++++++++++++++--------
1 file changed, 89 insertions(+), 25 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -35,6 +35,7 @@
#define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0
#define PCIE_CORE_LINK_L0S_ENTRY BIT(0)
#define PCIE_CORE_LINK_TRAINING BIT(5)
+#define PCIE_CORE_LINK_SPEED_SHIFT 16
#define PCIE_CORE_LINK_WIDTH_SHIFT 20
#define PCIE_CORE_ERR_CAPCTL_REG 0x118
#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)
@@ -193,6 +194,7 @@ struct advk_pcie {
struct mutex msi_used_lock;
u16 msi_msg;
int root_bus_nr;
+ int link_gen;
};
static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
@@ -216,23 +218,98 @@ static int advk_pcie_link_up(struct advk
static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
{
- struct device *dev = &pcie->pdev->dev;
int retries;
/* check if the link is up or not */
for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
- if (advk_pcie_link_up(pcie)) {
- dev_info(dev, "link up\n");
+ if (advk_pcie_link_up(pcie))
return 0;
- }
usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
}
- dev_err(dev, "link never came up\n");
return -ETIMEDOUT;
}
+static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
+{
+ int ret, neg_gen;
+ u32 reg;
+
+ /* Setup link speed */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg &= ~PCIE_GEN_SEL_MSK;
+ if (gen == 3)
+ reg |= SPEED_GEN_3;
+ else if (gen == 2)
+ reg |= SPEED_GEN_2;
+ else
+ reg |= SPEED_GEN_1;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /*
+ * Enable link training. This is not needed in every call to this
+ * function, just once suffices, but it does not break anything either.
+ */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg |= LINK_TRAINING_EN;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /*
+ * Start link training immediately after enabling it.
+ * This solves problems for some buggy cards.
+ */
+ reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
+ reg |= PCIE_CORE_LINK_TRAINING;
+ advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
+
+ ret = advk_pcie_wait_for_link(pcie);
+ if (ret)
+ return ret;
+
+ reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
+ neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf;
+
+ return neg_gen;
+}
+
+static void advk_pcie_train_link(struct advk_pcie *pcie)
+{
+ struct device *dev = &pcie->pdev->dev;
+ int neg_gen = -1, gen;
+
+ /*
+ * Try link training at link gen specified by device tree property
+ * 'max-link-speed'. If this fails, iteratively train at lower gen.
+ */
+ for (gen = pcie->link_gen; gen > 0; --gen) {
+ neg_gen = advk_pcie_train_at_gen(pcie, gen);
+ if (neg_gen > 0)
+ break;
+ }
+
+ if (neg_gen < 0)
+ goto err;
+
+ /*
+ * After successful training if negotiated gen is lower than requested,
+ * train again on negotiated gen. This solves some stability issues for
+ * some buggy gen1 cards.
+ */
+ if (neg_gen < gen) {
+ gen = neg_gen;
+ neg_gen = advk_pcie_train_at_gen(pcie, gen);
+ }
+
+ if (neg_gen == gen) {
+ dev_info(dev, "link up at gen %i\n", gen);
+ return;
+ }
+
+err:
+ dev_err(dev, "link never came up\n");
+}
+
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
{
u32 reg;
@@ -268,12 +345,6 @@ static void advk_pcie_setup_hw(struct ad
PCIE_CORE_CTRL2_TD_ENABLE;
advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
- /* Set GEN2 */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg &= ~PCIE_GEN_SEL_MSK;
- reg |= SPEED_GEN_2;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
/* Set lane X1 */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg &= ~LANE_CNT_MSK;
@@ -321,20 +392,7 @@ static void advk_pcie_setup_hw(struct ad
*/
msleep(PCI_PM_D3COLD_WAIT);
- /* Enable link training */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg |= LINK_TRAINING_EN;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
- /*
- * Start link training immediately after enabling it.
- * This solves problems for some buggy cards.
- */
- reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
- reg |= PCIE_CORE_LINK_TRAINING;
- advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
-
- advk_pcie_wait_for_link(pcie);
+ advk_pcie_train_link(pcie);
reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
@@ -968,6 +1026,12 @@ static int advk_pcie_probe(struct platfo
return ret;
}
+ ret = of_pci_get_max_link_speed(dev->of_node);
+ if (ret <= 0 || ret > 3)
+ pcie->link_gen = 3;
+ else
+ pcie->link_gen = ret;
+
advk_pcie_setup_hw(pcie);
ret = advk_pcie_init_irq_domain(pcie);
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 21/69] PCI: aardvark: Issue PERST via GPIO
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 20/69] PCI: aardvark: Improve link training Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 22/69] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros Greg Kroah-Hartman
` (54 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tomasz Maciej Nowak, Pali Rohár,
Lorenzo Pieralisi, Thomas Petazzoni, Marek Behún
From: Pali Rohár <pali@kernel.org>
commit 5169a9851daaa2782a7bd2bb83d5b1bd224b2879 upstream.
Add support for issuing PERST via GPIO specified in 'reset-gpios'
property (as described in PCI device tree bindings).
Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected
after reboot when PERST is not issued during driver initialization.
If bootloader already enabled link training then issuing PERST has no
effect for some buggy cards (e.g. Compex WLE900VX) and these cards are
not detected. We therefore clear the LINK_TRAINING_EN register before.
It was observed that Compex WLE900VX card needs to be in PERST reset
for at least 10ms if bootloader enabled link training.
Tested on Turris MOX.
Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 43 +++++++++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -9,6 +9,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
@@ -17,6 +18,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/of_address.h>
+#include <linux/of_gpio.h>
#include <linux/of_pci.h>
#include "../pci.h"
@@ -195,6 +197,7 @@ struct advk_pcie {
u16 msi_msg;
int root_bus_nr;
int link_gen;
+ struct gpio_desc *reset_gpio;
};
static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
@@ -310,10 +313,31 @@ err:
dev_err(dev, "link never came up\n");
}
+static void advk_pcie_issue_perst(struct advk_pcie *pcie)
+{
+ u32 reg;
+
+ if (!pcie->reset_gpio)
+ return;
+
+ /* PERST does not work for some cards when link training is enabled */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg &= ~LINK_TRAINING_EN;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /* 10ms delay is needed for some cards */
+ dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
+ gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+}
+
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
{
u32 reg;
+ advk_pcie_issue_perst(pcie);
+
/* Set to Direct mode */
reg = advk_readl(pcie, CTRL_CONFIG_REG);
reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
@@ -386,7 +410,8 @@ static void advk_pcie_setup_hw(struct ad
/*
* PERST# signal could have been asserted by pinctrl subsystem before
- * probe() callback has been called, making the endpoint going into
+ * probe() callback has been called or issued explicitly by reset gpio
+ * function advk_pcie_issue_perst(), making the endpoint going into
* fundamental reset. As required by PCI Express spec a delay for at
* least 100ms after such a reset before link training is needed.
*/
@@ -1026,6 +1051,22 @@ static int advk_pcie_probe(struct platfo
return ret;
}
+ pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
+ "reset-gpios", 0,
+ GPIOD_OUT_LOW,
+ "pcie1-reset");
+ ret = PTR_ERR_OR_ZERO(pcie->reset_gpio);
+ if (ret) {
+ if (ret == -ENOENT) {
+ pcie->reset_gpio = NULL;
+ } else {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get reset-gpio: %i\n",
+ ret);
+ return ret;
+ }
+ }
+
ret = of_pci_get_max_link_speed(dev->of_node);
if (ret <= 0 || ret > 3)
pcie->link_gen = 3;
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 22/69] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 21/69] PCI: aardvark: Issue PERST via GPIO Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 23/69] PCI: aardvark: Indicate error in val when config read fails Greg Kroah-Hartman
` (53 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tomasz Maciej Nowak, Pali Rohár,
Lorenzo Pieralisi, Rob Herring, Thomas Petazzoni,
Marek Behún
From: Pali Rohár <pali@kernel.org>
commit 96be36dbffacea0aa9e6ec4839583e79faa141a1 upstream.
PCI-E capability macros are already defined in linux/pci_regs.h.
Remove their reimplementation in pcie-aardvark.
Link: https://lore.kernel.org/r/20200430080625.26070-9-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 42 +++++++++++++++-------------------
1 file changed, 19 insertions(+), 23 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -28,17 +28,7 @@
#define PCIE_CORE_CMD_IO_ACCESS_EN BIT(0)
#define PCIE_CORE_CMD_MEM_ACCESS_EN BIT(1)
#define PCIE_CORE_CMD_MEM_IO_REQ_EN BIT(2)
-#define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8
-#define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4)
-#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT 5
-#define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11)
-#define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT 12
-#define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ 0x2
-#define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0
-#define PCIE_CORE_LINK_L0S_ENTRY BIT(0)
-#define PCIE_CORE_LINK_TRAINING BIT(5)
-#define PCIE_CORE_LINK_SPEED_SHIFT 16
-#define PCIE_CORE_LINK_WIDTH_SHIFT 20
+#define PCIE_CORE_PCIEXP_CAP 0xc0
#define PCIE_CORE_ERR_CAPCTL_REG 0x118
#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)
#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN BIT(6)
@@ -210,6 +200,11 @@ static inline u32 advk_readl(struct advk
return readl(pcie->base + reg);
}
+static inline u16 advk_read16(struct advk_pcie *pcie, u64 reg)
+{
+ return advk_readl(pcie, (reg & ~0x3)) >> ((reg & 0x3) * 8);
+}
+
static int advk_pcie_link_up(struct advk_pcie *pcie)
{
u32 val, ltssm_state;
@@ -262,16 +257,16 @@ static int advk_pcie_train_at_gen(struct
* Start link training immediately after enabling it.
* This solves problems for some buggy cards.
*/
- reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
- reg |= PCIE_CORE_LINK_TRAINING;
- advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
+ reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
+ reg |= PCI_EXP_LNKCTL_RL;
+ advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
ret = advk_pcie_wait_for_link(pcie);
if (ret)
return ret;
- reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
- neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf;
+ reg = advk_read16(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKSTA);
+ neg_gen = reg & PCI_EXP_LNKSTA_CLS;
return neg_gen;
}
@@ -356,13 +351,14 @@ static void advk_pcie_setup_hw(struct ad
PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV;
advk_writel(pcie, reg, PCIE_CORE_ERR_CAPCTL_REG);
- /* Set PCIe Device Control and Status 1 PF0 register */
- reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
- (7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
- PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
- (PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ <<
- PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT);
- advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
+ /* Set PCIe Device Control register */
+ reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
+ reg &= ~PCI_EXP_DEVCTL_RELAX_EN;
+ reg &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
+ reg &= ~PCI_EXP_DEVCTL_READRQ;
+ reg |= PCI_EXP_DEVCTL_PAYLOAD; /* Set max payload size */
+ reg |= PCI_EXP_DEVCTL_READRQ_512B;
+ advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
/* Program PCIe Control 2 to disable strict ordering */
reg = PCIE_CORE_CTRL2_RESERVED |
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 23/69] PCI: aardvark: Indicate error in val when config read fails
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 22/69] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 24/69] PCI: aardvark: Dont touch PCIe registers if no card connected Greg Kroah-Hartman
` (52 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Bjorn Helgaas, Pali Rohár,
Lorenzo Pieralisi, Marek Behún
From: Pali Rohár <pali@kernel.org>
commit b1bd5714472cc72e14409f5659b154c765a76c65 upstream.
Most callers of config read do not check for return value. But most of the
ones that do, checks for error indication in 'val' variable.
This patch updates error handling in advk_pcie_rd_conf() function. If PIO
transfer fails then 'val' variable is set to 0xffffffff which indicates
failture.
Link: https://lore.kernel.org/r/20200528162604.GA323482@bjorn-Precision-5520
Link: https://lore.kernel.org/r/20200601130315.18895-1-pali@kernel.org
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -596,8 +596,10 @@ static int advk_pcie_rd_conf(struct pci_
advk_writel(pcie, 1, PIO_START);
ret = advk_pcie_wait_pio(pcie);
- if (ret < 0)
+ if (ret < 0) {
+ *val = 0xffffffff;
return PCIBIOS_SET_FAILED;
+ }
/* Check PIO status and get the read result */
ret = advk_pcie_check_pio_status(pcie, val);
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 24/69] PCI: aardvark: Dont touch PCIe registers if no card connected
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 23/69] PCI: aardvark: Indicate error in val when config read fails Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 25/69] PCI: aardvark: Fix compilation on s390 Greg Kroah-Hartman
` (51 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Lorenzo Pieralisi,
Marek Behún
From: Pali Rohár <pali@kernel.org>
commit 70e380250c3621c55ff218cbaf2272830d9dbb1d upstream.
When there is no PCIe card connected and advk_pcie_rd_conf() or
advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated
root bridge, the aardvark driver throws the following error message:
advk-pcie d0070000.pcie: config read/write timed out
Obviously accessing PCIe registers of disconnected card is not possible.
Extend check in advk_pcie_valid_device() function for validating
availability of PCIe bus. If PCIe link is down, then the device is marked
as Not Found and the driver does not try to access these registers.
This is just an optimization to prevent accessing PCIe registers when card
is disconnected. Trying to access PCIe registers of disconnected card does
not cause any crash, kernel just needs to wait for a timeout. So if card
disappear immediately after checking for PCIe link (before accessing PCIe
registers), it does not cause any problems.
Link: https://lore.kernel.org/r/20200702083036.12230-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -525,6 +525,13 @@ static bool advk_pcie_valid_device(struc
if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
return false;
+ /*
+ * If the link goes down after we check for link-up, nothing bad
+ * happens but the config access times out.
+ */
+ if (bus->number != pcie->root_bus_nr && !advk_pcie_link_up(pcie))
+ return false;
+
return true;
}
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 25/69] PCI: aardvark: Fix compilation on s390
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 24/69] PCI: aardvark: Dont touch PCIe registers if no card connected Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 26/69] PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link() Greg Kroah-Hartman
` (50 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Pali Rohár,
Lorenzo Pieralisi, Marek Behún, Marek Behún
From: Pali Rohár <pali@kernel.org>
commit b32c012e4b98f0126aa327be2d1f409963057643 upstream.
Include linux/gpio/consumer.h instead of linux/gpio.h, as is said in the
latter file.
This was reported by kernel test bot when compiling for s390.
drivers/pci/controller/pci-aardvark.c:350:2: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror,-Wimplicit-function-declaration]
drivers/pci/controller/pci-aardvark.c:1074:21: error: implicit declaration of function 'devm_gpiod_get_from_of_node' [-Werror,-Wimplicit-function-declaration]
drivers/pci/controller/pci-aardvark.c:1076:14: error: use of undeclared identifier 'GPIOD_OUT_LOW'
Link: https://lore.kernel.org/r/202006211118.LxtENQfl%25lkp@intel.com
Link: https://lore.kernel.org/r/20200907111038.5811-2-pali@kernel.org
Fixes: 5169a9851daa ("PCI: aardvark: Issue PERST via GPIO")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -9,7 +9,7 @@
*/
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 26/69] PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link()
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 25/69] PCI: aardvark: Fix compilation on s390 Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 27/69] PCI: aardvark: Update comment about disabling link training Greg Kroah-Hartman
` (49 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, Pali Rohár,
Lorenzo Pieralisi, Marek Behún
From: Pali Rohár <pali@kernel.org>
commit d0c6a3475b033960e85ae2bf176b14cab0a627d2 upstream.
Move code which belongs to link training (delays and resets) into
advk_pcie_train_link() function, so everything related to link training,
including timings is at one place.
After experiments it can be observed that link training in aardvark
hardware is very sensitive to timings and delays, so it is a good idea to
have this code at the same place as link training calls.
This patch does not change behavior of aardvark initialization.
Link: https://lore.kernel.org/r/20200907111038.5811-6-pali@kernel.org
Tested-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 64 ++++++++++++++++++----------------
1 file changed, 34 insertions(+), 30 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -229,6 +229,25 @@ static int advk_pcie_wait_for_link(struc
return -ETIMEDOUT;
}
+static void advk_pcie_issue_perst(struct advk_pcie *pcie)
+{
+ u32 reg;
+
+ if (!pcie->reset_gpio)
+ return;
+
+ /* PERST does not work for some cards when link training is enabled */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg &= ~LINK_TRAINING_EN;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /* 10ms delay is needed for some cards */
+ dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
+ gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+}
+
static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
{
int ret, neg_gen;
@@ -277,6 +296,21 @@ static void advk_pcie_train_link(struct
int neg_gen = -1, gen;
/*
+ * Reset PCIe card via PERST# signal. Some cards are not detected
+ * during link training when they are in some non-initial state.
+ */
+ advk_pcie_issue_perst(pcie);
+
+ /*
+ * PERST# signal could have been asserted by pinctrl subsystem before
+ * probe() callback has been called or issued explicitly by reset gpio
+ * function advk_pcie_issue_perst(), making the endpoint going into
+ * fundamental reset. As required by PCI Express spec a delay for at
+ * least 100ms after such a reset before link training is needed.
+ */
+ msleep(PCI_PM_D3COLD_WAIT);
+
+ /*
* Try link training at link gen specified by device tree property
* 'max-link-speed'. If this fails, iteratively train at lower gen.
*/
@@ -308,31 +342,10 @@ err:
dev_err(dev, "link never came up\n");
}
-static void advk_pcie_issue_perst(struct advk_pcie *pcie)
-{
- u32 reg;
-
- if (!pcie->reset_gpio)
- return;
-
- /* PERST does not work for some cards when link training is enabled */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg &= ~LINK_TRAINING_EN;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
- /* 10ms delay is needed for some cards */
- dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
- gpiod_set_value_cansleep(pcie->reset_gpio, 1);
- usleep_range(10000, 11000);
- gpiod_set_value_cansleep(pcie->reset_gpio, 0);
-}
-
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
{
u32 reg;
- advk_pcie_issue_perst(pcie);
-
/* Set to Direct mode */
reg = advk_readl(pcie, CTRL_CONFIG_REG);
reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
@@ -404,15 +417,6 @@ static void advk_pcie_setup_hw(struct ad
reg |= PIO_CTRL_ADDR_WIN_DISABLE;
advk_writel(pcie, reg, PIO_CTRL);
- /*
- * PERST# signal could have been asserted by pinctrl subsystem before
- * probe() callback has been called or issued explicitly by reset gpio
- * function advk_pcie_issue_perst(), making the endpoint going into
- * fundamental reset. As required by PCI Express spec a delay for at
- * least 100ms after such a reset before link training is needed.
- */
- msleep(PCI_PM_D3COLD_WAIT);
-
advk_pcie_train_link(pcie);
reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 27/69] PCI: aardvark: Update comment about disabling link training
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 26/69] PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link() Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 28/69] PCI: aardvark: Configure PCIe resources from ranges DT property Greg Kroah-Hartman
` (48 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Lorenzo Pieralisi,
Marek Behún
From: Pali Rohár <pali@kernel.org>
commit 1d1cd163d0de22a4041a6f1aeabcf78f80076539 upstream.
According to PCI Express Base Specifications (rev 4.0, 6.6.1
"Conventional reset"), after fundamental reset a 100ms delay is needed
prior to enabling link training.
Update comment in code to reflect this requirement.
Link: https://lore.kernel.org/r/20201202184659.3795-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -236,7 +236,14 @@ static void advk_pcie_issue_perst(struct
if (!pcie->reset_gpio)
return;
- /* PERST does not work for some cards when link training is enabled */
+ /*
+ * As required by PCI Express spec (PCI Express Base Specification, REV.
+ * 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset) a delay
+ * for at least 100ms after de-asserting PERST# signal is needed before
+ * link training is enabled. So ensure that link training is disabled
+ * prior de-asserting PERST# signal to fulfill that PCI Express spec
+ * requirement.
+ */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg &= ~LINK_TRAINING_EN;
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 28/69] PCI: aardvark: Configure PCIe resources from ranges DT property
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 27/69] PCI: aardvark: Update comment about disabling link training Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 29/69] PCI: aardvark: Fix PCIe Max Payload Size setting Greg Kroah-Hartman
` (47 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Lorenzo Pieralisi,
Marek Behún
From: Pali Rohár <pali@kernel.org>
commit 64f160e19e9264a7f6d89c516baae1473b6f8359 upstream.
In commit 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window
configuration") was removed aardvark PCIe outbound window configuration and
commit description said that was recommended solution by HW designers.
But that commit completely removed support for configuring PCIe IO
resources without removing PCIe IO 'ranges' from DTS files. After that
commit PCIe IO space started to be treated as PCIe MEM space and accessing
it just caused kernel crash.
Moreover implementation of PCIe outbound windows prior that commit was
incorrect. It completely ignored offset between CPU address and PCIe bus
address and expected that in DTS is CPU address always same as PCIe bus
address without doing any checks. Also it completely ignored size of every
PCIe resource specified in 'ranges' DTS property and expected that every
PCIe resource has size 128 MB (also for PCIe IO range). Again without any
check. Apparently none of PCIe resource has in DTS specified size of 128
MB. So it was completely broken and thanks to how aardvark mask works,
configuration was completely ignored.
This patch reverts back support for PCIe outbound window configuration but
implementation is a new without issues mentioned above. PCIe outbound
window is required when DTS specify in 'ranges' property non-zero offset
between CPU and PCIe address space. To address recommendation by HW
designers as specified in commit description of 6df6ba974a55, set default
outbound parameters as PCIe MEM access without translation and therefore
for this PCIe 'ranges' it is not needed to configure PCIe outbound window.
For PCIe IO space is needed to configure aardvark PCIe outbound window.
This patch fixes kernel crash when trying to access PCIe IO space.
Link: https://lore.kernel.org/r/20210624215546.4015-2-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window configuration")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 190 +++++++++++++++++++++++++++++++++-
1 file changed, 189 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -106,6 +106,46 @@
#define PCIE_MSI_PAYLOAD_REG (CONTROL_BASE_ADDR + 0x9C)
#define PCIE_MSI_DATA_MASK GENMASK(15, 0)
+/* PCIe window configuration */
+#define OB_WIN_BASE_ADDR 0x4c00
+#define OB_WIN_BLOCK_SIZE 0x20
+#define OB_WIN_COUNT 8
+#define OB_WIN_REG_ADDR(win, offset) (OB_WIN_BASE_ADDR + \
+ OB_WIN_BLOCK_SIZE * (win) + \
+ (offset))
+#define OB_WIN_MATCH_LS(win) OB_WIN_REG_ADDR(win, 0x00)
+#define OB_WIN_ENABLE BIT(0)
+#define OB_WIN_MATCH_MS(win) OB_WIN_REG_ADDR(win, 0x04)
+#define OB_WIN_REMAP_LS(win) OB_WIN_REG_ADDR(win, 0x08)
+#define OB_WIN_REMAP_MS(win) OB_WIN_REG_ADDR(win, 0x0c)
+#define OB_WIN_MASK_LS(win) OB_WIN_REG_ADDR(win, 0x10)
+#define OB_WIN_MASK_MS(win) OB_WIN_REG_ADDR(win, 0x14)
+#define OB_WIN_ACTIONS(win) OB_WIN_REG_ADDR(win, 0x18)
+#define OB_WIN_DEFAULT_ACTIONS (OB_WIN_ACTIONS(OB_WIN_COUNT-1) + 0x4)
+#define OB_WIN_FUNC_NUM_MASK GENMASK(31, 24)
+#define OB_WIN_FUNC_NUM_SHIFT 24
+#define OB_WIN_FUNC_NUM_ENABLE BIT(23)
+#define OB_WIN_BUS_NUM_BITS_MASK GENMASK(22, 20)
+#define OB_WIN_BUS_NUM_BITS_SHIFT 20
+#define OB_WIN_MSG_CODE_ENABLE BIT(22)
+#define OB_WIN_MSG_CODE_MASK GENMASK(21, 14)
+#define OB_WIN_MSG_CODE_SHIFT 14
+#define OB_WIN_MSG_PAYLOAD_LEN BIT(12)
+#define OB_WIN_ATTR_ENABLE BIT(11)
+#define OB_WIN_ATTR_TC_MASK GENMASK(10, 8)
+#define OB_WIN_ATTR_TC_SHIFT 8
+#define OB_WIN_ATTR_RELAXED BIT(7)
+#define OB_WIN_ATTR_NOSNOOP BIT(6)
+#define OB_WIN_ATTR_POISON BIT(5)
+#define OB_WIN_ATTR_IDO BIT(4)
+#define OB_WIN_TYPE_MASK GENMASK(3, 0)
+#define OB_WIN_TYPE_SHIFT 0
+#define OB_WIN_TYPE_MEM 0x0
+#define OB_WIN_TYPE_IO 0x4
+#define OB_WIN_TYPE_CONFIG_TYPE0 0x8
+#define OB_WIN_TYPE_CONFIG_TYPE1 0x9
+#define OB_WIN_TYPE_MSG 0xc
+
/* LMI registers base address and register offsets */
#define LMI_BASE_ADDR 0x6000
#define CFG_REG (LMI_BASE_ADDR + 0x0)
@@ -174,6 +214,13 @@ struct advk_pcie {
struct platform_device *pdev;
void __iomem *base;
struct list_head resources;
+ struct {
+ phys_addr_t match;
+ phys_addr_t remap;
+ phys_addr_t mask;
+ u32 actions;
+ } wins[OB_WIN_COUNT];
+ u8 wins_count;
struct irq_domain *irq_domain;
struct irq_chip irq_chip;
raw_spinlock_t irq_lock;
@@ -349,9 +396,39 @@ err:
dev_err(dev, "link never came up\n");
}
+/*
+ * Set PCIe address window register which could be used for memory
+ * mapping.
+ */
+static void advk_pcie_set_ob_win(struct advk_pcie *pcie, u8 win_num,
+ phys_addr_t match, phys_addr_t remap,
+ phys_addr_t mask, u32 actions)
+{
+ advk_writel(pcie, OB_WIN_ENABLE |
+ lower_32_bits(match), OB_WIN_MATCH_LS(win_num));
+ advk_writel(pcie, upper_32_bits(match), OB_WIN_MATCH_MS(win_num));
+ advk_writel(pcie, lower_32_bits(remap), OB_WIN_REMAP_LS(win_num));
+ advk_writel(pcie, upper_32_bits(remap), OB_WIN_REMAP_MS(win_num));
+ advk_writel(pcie, lower_32_bits(mask), OB_WIN_MASK_LS(win_num));
+ advk_writel(pcie, upper_32_bits(mask), OB_WIN_MASK_MS(win_num));
+ advk_writel(pcie, actions, OB_WIN_ACTIONS(win_num));
+}
+
+static void advk_pcie_disable_ob_win(struct advk_pcie *pcie, u8 win_num)
+{
+ advk_writel(pcie, 0, OB_WIN_MATCH_LS(win_num));
+ advk_writel(pcie, 0, OB_WIN_MATCH_MS(win_num));
+ advk_writel(pcie, 0, OB_WIN_REMAP_LS(win_num));
+ advk_writel(pcie, 0, OB_WIN_REMAP_MS(win_num));
+ advk_writel(pcie, 0, OB_WIN_MASK_LS(win_num));
+ advk_writel(pcie, 0, OB_WIN_MASK_MS(win_num));
+ advk_writel(pcie, 0, OB_WIN_ACTIONS(win_num));
+}
+
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
{
u32 reg;
+ int i;
/* Set to Direct mode */
reg = advk_readl(pcie, CTRL_CONFIG_REG);
@@ -415,15 +492,51 @@ static void advk_pcie_setup_hw(struct ad
reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK);
advk_writel(pcie, reg, HOST_CTRL_INT_MASK_REG);
+ /*
+ * Enable AXI address window location generation:
+ * When it is enabled, the default outbound window
+ * configurations (Default User Field: 0xD0074CFC)
+ * are used to transparent address translation for
+ * the outbound transactions. Thus, PCIe address
+ * windows are not required for transparent memory
+ * access when default outbound window configuration
+ * is set for memory access.
+ */
reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
reg |= PCIE_CORE_CTRL2_OB_WIN_ENABLE;
advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
- /* Bypass the address window mapping for PIO */
+ /*
+ * Set memory access in Default User Field so it
+ * is not required to configure PCIe address for
+ * transparent memory access.
+ */
+ advk_writel(pcie, OB_WIN_TYPE_MEM, OB_WIN_DEFAULT_ACTIONS);
+
+ /*
+ * Bypass the address window mapping for PIO:
+ * Since PIO access already contains all required
+ * info over AXI interface by PIO registers, the
+ * address window is not required.
+ */
reg = advk_readl(pcie, PIO_CTRL);
reg |= PIO_CTRL_ADDR_WIN_DISABLE;
advk_writel(pcie, reg, PIO_CTRL);
+ /*
+ * Configure PCIe address windows for non-memory or
+ * non-transparent access as by default PCIe uses
+ * transparent memory access.
+ */
+ for (i = 0; i < pcie->wins_count; i++)
+ advk_pcie_set_ob_win(pcie, i,
+ pcie->wins[i].match, pcie->wins[i].remap,
+ pcie->wins[i].mask, pcie->wins[i].actions);
+
+ /* Disable remaining PCIe outbound windows */
+ for (i = pcie->wins_count; i < OB_WIN_COUNT; i++)
+ advk_pcie_disable_ob_win(pcie, i);
+
advk_pcie_train_link(pcie);
reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
@@ -1038,6 +1151,7 @@ static int advk_pcie_probe(struct platfo
struct advk_pcie *pcie;
struct resource *res;
struct pci_host_bridge *bridge;
+ struct resource_entry *entry;
int ret, irq;
bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct advk_pcie));
@@ -1067,6 +1181,80 @@ static int advk_pcie_probe(struct platfo
return ret;
}
+ resource_list_for_each_entry(entry, &pcie->resources) {
+ resource_size_t start = entry->res->start;
+ resource_size_t size = resource_size(entry->res);
+ unsigned long type = resource_type(entry->res);
+ u64 win_size;
+
+ /*
+ * Aardvark hardware allows to configure also PCIe window
+ * for config type 0 and type 1 mapping, but driver uses
+ * only PIO for issuing configuration transfers which does
+ * not use PCIe window configuration.
+ */
+ if (type != IORESOURCE_MEM && type != IORESOURCE_MEM_64 &&
+ type != IORESOURCE_IO)
+ continue;
+
+ /*
+ * Skip transparent memory resources. Default outbound access
+ * configuration is set to transparent memory access so it
+ * does not need window configuration.
+ */
+ if ((type == IORESOURCE_MEM || type == IORESOURCE_MEM_64) &&
+ entry->offset == 0)
+ continue;
+
+ /*
+ * The n-th PCIe window is configured by tuple (match, remap, mask)
+ * and an access to address A uses this window if A matches the
+ * match with given mask.
+ * So every PCIe window size must be a power of two and every start
+ * address must be aligned to window size. Minimal size is 64 KiB
+ * because lower 16 bits of mask must be zero. Remapped address
+ * may have set only bits from the mask.
+ */
+ while (pcie->wins_count < OB_WIN_COUNT && size > 0) {
+ /* Calculate the largest aligned window size */
+ win_size = (1ULL << (fls64(size)-1)) |
+ (start ? (1ULL << __ffs64(start)) : 0);
+ win_size = 1ULL << __ffs64(win_size);
+ if (win_size < 0x10000)
+ break;
+
+ dev_dbg(dev,
+ "Configuring PCIe window %d: [0x%llx-0x%llx] as %lu\n",
+ pcie->wins_count, (unsigned long long)start,
+ (unsigned long long)start + win_size, type);
+
+ if (type == IORESOURCE_IO) {
+ pcie->wins[pcie->wins_count].actions = OB_WIN_TYPE_IO;
+ pcie->wins[pcie->wins_count].match = pci_pio_to_address(start);
+ } else {
+ pcie->wins[pcie->wins_count].actions = OB_WIN_TYPE_MEM;
+ pcie->wins[pcie->wins_count].match = start;
+ }
+ pcie->wins[pcie->wins_count].remap = start - entry->offset;
+ pcie->wins[pcie->wins_count].mask = ~(win_size - 1);
+
+ if (pcie->wins[pcie->wins_count].remap & (win_size - 1))
+ break;
+
+ start += win_size;
+ size -= win_size;
+ pcie->wins_count++;
+ }
+
+ if (size > 0) {
+ dev_err(&pcie->pdev->dev,
+ "Invalid PCIe region [0x%llx-0x%llx]\n",
+ (unsigned long long)entry->res->start,
+ (unsigned long long)entry->res->end + 1);
+ return -EINVAL;
+ }
+ }
+
pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
"reset-gpios", 0,
GPIOD_OUT_LOW,
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 29/69] PCI: aardvark: Fix PCIe Max Payload Size setting
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 28/69] PCI: aardvark: Configure PCIe resources from ranges DT property Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 30/69] PCI: aardvark: Fix link training Greg Kroah-Hartman
` (46 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Marek Behún,
Lorenzo Pieralisi
From: Pali Rohár <pali@kernel.org>
commit a4e17d65dafdd3513042d8f00404c9b6068a825c upstream.
Change PCIe Max Payload Size setting in PCIe Device Control register to 512
bytes to align with PCIe Link Initialization sequence as defined in Marvell
Armada 3700 Functional Specification. According to the specification,
maximal Max Payload Size supported by this device is 512 bytes.
Without this kernel prints suspicious line:
pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 16384, max 512)
With this change it changes to:
pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 512, max 512)
Link: https://lore.kernel.org/r/20211005180952.6812-3-kabel@kernel.org
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -452,8 +452,9 @@ static void advk_pcie_setup_hw(struct ad
reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
reg &= ~PCI_EXP_DEVCTL_RELAX_EN;
reg &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
+ reg &= ~PCI_EXP_DEVCTL_PAYLOAD;
reg &= ~PCI_EXP_DEVCTL_READRQ;
- reg |= PCI_EXP_DEVCTL_PAYLOAD; /* Set max payload size */
+ reg |= PCI_EXP_DEVCTL_PAYLOAD_512B;
reg |= PCI_EXP_DEVCTL_READRQ_512B;
advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 30/69] PCI: aardvark: Fix link training
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 29/69] PCI: aardvark: Fix PCIe Max Payload Size setting Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 31/69] PCI: aardvark: Fix checking for link up via LTSSM state Greg Kroah-Hartman
` (45 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Marek Behún,
Lorenzo Pieralisi
From: Pali Rohár <pali@kernel.org>
commit f76b36d40beee0a13aa8f6aa011df0d7cbbb8a7f upstream.
Fix multiple link training issues in aardvark driver. The main reason of
these issues was misunderstanding of what certain registers do, since their
names and comments were misleading: before commit 96be36dbffac ("PCI:
aardvark: Replace custom macros by standard linux/pci_regs.h macros"), the
pci-aardvark.c driver used custom macros for accessing standard PCIe Root
Bridge registers, and misleading comments did not help to understand what
the code was really doing.
After doing more tests and experiments I've come to the conclusion that the
SPEED_GEN register in aardvark sets the PCIe revision / generation
compliance and forces maximal link speed. Both GEN3 and GEN2 values set the
read-only PCI_EXP_FLAGS_VERS bits (PCIe capabilities version of Root
Bridge) to value 2, while GEN1 value sets PCI_EXP_FLAGS_VERS to 1, which
matches with PCI Express specifications revisions 3, 2 and 1 respectively.
Changing SPEED_GEN also sets the read-only bits PCI_EXP_LNKCAP_SLS and
PCI_EXP_LNKCAP2_SLS to corresponding speed.
(Note that PCI Express rev 1 specification does not define PCI_EXP_LNKCAP2
and PCI_EXP_LNKCTL2 registers and when SPEED_GEN is set to GEN1 (which
also sets PCI_EXP_FLAGS_VERS set to 1), lspci cannot access
PCI_EXP_LNKCAP2 and PCI_EXP_LNKCTL2 registers.)
Changing PCIe link speed can be done via PCI_EXP_LNKCTL2_TLS bits of
PCI_EXP_LNKCTL2 register. Armada 3700 Functional Specifications says that
the default value of PCI_EXP_LNKCTL2_TLS is based on SPEED_GEN value, but
tests showed that the default value is always 8.0 GT/s, independently of
speed set by SPEED_GEN. So after setting SPEED_GEN, we must also set value
in PCI_EXP_LNKCTL2 register via PCI_EXP_LNKCTL2_TLS bits.
Triggering PCI_EXP_LNKCTL_RL bit immediately after setting LINK_TRAINING_EN
bit actually doesn't do anything. Tests have shown that a delay is needed
after enabling LINK_TRAINING_EN bit. As triggering PCI_EXP_LNKCTL_RL
currently does nothing, remove it.
Commit 43fc679ced18 ("PCI: aardvark: Improve link training") introduced
code which sets SPEED_GEN register based on negotiated link speed from
PCI_EXP_LNKSTA_CLS bits of PCI_EXP_LNKSTA register. This code was added to
fix detection of Compex WLE900VX (Atheros QCA9880) WiFi GEN1 PCIe cards, as
otherwise these cards were "invisible" on PCIe bus (probably because they
crashed). But apparently more people reported the same issues with these
cards also with other PCIe controllers [1] and I was able to reproduce this
issue also with other "noname" WiFi cards based on Atheros QCA9890 chip
(with the same PCI vendor/device ids as Atheros QCA9880). So this is not an
issue in aardvark but rather an issue in Atheros QCA98xx chips. Also, this
issue only exists if the kernel is compiled with PCIe ASPM support, and a
generic workaround for this is to change PCIe Bridge to 2.5 GT/s link speed
via PCI_EXP_LNKCTL2_TLS_2_5GT bits in PCI_EXP_LNKCTL2 register [2], before
triggering PCI_EXP_LNKCTL_RL bit. This workaround also works when SPEED_GEN
is set to value GEN2 (5 GT/s). So remove this hack completely in the
aardvark driver and always set SPEED_GEN to value from 'max-link-speed' DT
property. Fix for Atheros QCA98xx chips is handled separately by patch [2].
These two things (code for triggering PCI_EXP_LNKCTL_RL bit and changing
SPEED_GEN value) also explain why commit 6964494582f5 ("PCI: aardvark:
Train link immediately after enabling training") somehow fixed detection of
those problematic Compex cards with Atheros chips: if triggering link
retraining (via PCI_EXP_LNKCTL_RL bit) was done immediately after enabling
link training (via LINK_TRAINING_EN), it did nothing. If there was a
specific delay, aardvark HW already initialized PCIe link and therefore
triggering link retraining caused the above issue. Compex cards triggered
link down event and disappeared from the PCIe bus.
Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready before
training link") added 100ms sleep before calling 'Start link training'
command and explained that it is a requirement of PCI Express
specification. But the code after this 100ms sleep was not doing 'Start
link training', rather it triggered PCI_EXP_LNKCTL_RL bit via PCIe Root
Bridge to put link into Recovery state.
The required delay after fundamental reset is already done in function
advk_pcie_wait_for_link() which also checks whether PCIe link is up.
So after removing the code which triggers PCI_EXP_LNKCTL_RL bit on PCIe
Root Bridge, there is no need to wait 100ms again. Remove the extra
msleep() call and update comment about the delay required by the PCI
Express specification.
According to Marvell Armada 3700 Functional Specifications, Link training
should be enabled via aardvark register LINK_TRAINING_EN after selecting
PCIe generation and x1 lane. There is no need to disable it prior resetting
card via PERST# signal. This disabling code was introduced in commit
5169a9851daa ("PCI: aardvark: Issue PERST via GPIO") as a workaround for
some Atheros cards. It turns out that this also is Atheros specific issue
and affects any PCIe controller, not only aardvark. Moreover this Atheros
issue was triggered by juggling with PCI_EXP_LNKCTL_RL, LINK_TRAINING_EN
and SPEED_GEN bits interleaved with sleeps. Now, after removing triggering
PCI_EXP_LNKCTL_RL, there is no need to explicitly disable LINK_TRAINING_EN
bit. So remove this code too. The problematic Compex cards described in
previous git commits are correctly detected in advk_pcie_train_link()
function even after applying all these changes.
Note that with this patch, and also prior this patch, some NVMe disks which
support PCIe GEN3 with 8 GT/s speed are negotiated only at the lowest link
speed 2.5 GT/s, independently of SPEED_GEN value. After manually triggering
PCI_EXP_LNKCTL_RL bit (e.g. from userspace via setpci), these NVMe disks
change link speed to 5 GT/s when SPEED_GEN was configured to GEN2. This
issue first needs to be properly investigated. I will send a fix in the
future.
On the other hand, some other GEN2 PCIe cards with 5 GT/s speed are
autonomously by HW autonegotiated at full 5 GT/s speed without need of any
software interaction.
Armada 3700 Functional Specifications describes the following steps for
link training: set SPEED_GEN to GEN2, enable LINK_TRAINING_EN, poll until
link training is complete, trigger PCI_EXP_LNKCTL_RL, poll until signal
rate is 5 GT/s, poll until link training is complete, enable ASPM L0s.
The requirement for triggering PCI_EXP_LNKCTL_RL can be explained by the
need to achieve 5 GT/s speed (as changing link speed is done by throw to
recovery state entered by PCI_EXP_LNKCTL_RL) or maybe as a part of enabling
ASPM L0s (but in this case ASPM L0s should have been enabled prior
PCI_EXP_LNKCTL_RL).
It is unknown why the original pci-aardvark.c driver was triggering
PCI_EXP_LNKCTL_RL bit before waiting for the link to be up. This does not
align with neither PCIe base specifications nor with Armada 3700 Functional
Specification. (Note that in older versions of aardvark, this bit was
called incorrectly PCIE_CORE_LINK_TRAINING, so this may be the reason.)
It is also unknown why Armada 3700 Functional Specification says that it is
needed to trigger PCI_EXP_LNKCTL_RL for GEN2 mode, as according to PCIe
base specification 5 GT/s speed negotiation is supposed to be entirely
autonomous, even if initial speed is 2.5 GT/s.
[1] - https://lore.kernel.org/linux-pci/87h7l8axqp.fsf@toke.dk/
[2] - https://lore.kernel.org/linux-pci/20210326124326.21163-1-pali@kernel.org/
Link: https://lore.kernel.org/r/20211005180952.6812-12-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 119 ++++++++++------------------------
1 file changed, 35 insertions(+), 84 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -247,11 +247,6 @@ static inline u32 advk_readl(struct advk
return readl(pcie->base + reg);
}
-static inline u16 advk_read16(struct advk_pcie *pcie, u64 reg)
-{
- return advk_readl(pcie, (reg & ~0x3)) >> ((reg & 0x3) * 8);
-}
-
static int advk_pcie_link_up(struct advk_pcie *pcie)
{
u32 val, ltssm_state;
@@ -278,23 +273,9 @@ static int advk_pcie_wait_for_link(struc
static void advk_pcie_issue_perst(struct advk_pcie *pcie)
{
- u32 reg;
-
if (!pcie->reset_gpio)
return;
- /*
- * As required by PCI Express spec (PCI Express Base Specification, REV.
- * 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset) a delay
- * for at least 100ms after de-asserting PERST# signal is needed before
- * link training is enabled. So ensure that link training is disabled
- * prior de-asserting PERST# signal to fulfill that PCI Express spec
- * requirement.
- */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg &= ~LINK_TRAINING_EN;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
/* 10ms delay is needed for some cards */
dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
gpiod_set_value_cansleep(pcie->reset_gpio, 1);
@@ -302,54 +283,47 @@ static void advk_pcie_issue_perst(struct
gpiod_set_value_cansleep(pcie->reset_gpio, 0);
}
-static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
+static void advk_pcie_train_link(struct advk_pcie *pcie)
{
- int ret, neg_gen;
+ struct device *dev = &pcie->pdev->dev;
u32 reg;
+ int ret;
- /* Setup link speed */
+ /*
+ * Setup PCIe rev / gen compliance based on device tree property
+ * 'max-link-speed' which also forces maximal link speed.
+ */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg &= ~PCIE_GEN_SEL_MSK;
- if (gen == 3)
+ if (pcie->link_gen == 3)
reg |= SPEED_GEN_3;
- else if (gen == 2)
+ else if (pcie->link_gen == 2)
reg |= SPEED_GEN_2;
else
reg |= SPEED_GEN_1;
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
/*
- * Enable link training. This is not needed in every call to this
- * function, just once suffices, but it does not break anything either.
- */
+ * Set maximal link speed value also into PCIe Link Control 2 register.
+ * Armada 3700 Functional Specification says that default value is based
+ * on SPEED_GEN but tests showed that default value is always 8.0 GT/s.
+ */
+ reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL2);
+ reg &= ~PCI_EXP_LNKCTL2_TLS;
+ if (pcie->link_gen == 3)
+ reg |= PCI_EXP_LNKCTL2_TLS_8_0GT;
+ else if (pcie->link_gen == 2)
+ reg |= PCI_EXP_LNKCTL2_TLS_5_0GT;
+ else
+ reg |= PCI_EXP_LNKCTL2_TLS_2_5GT;
+ advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL2);
+
+ /* Enable link training after selecting PCIe generation */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg |= LINK_TRAINING_EN;
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
/*
- * Start link training immediately after enabling it.
- * This solves problems for some buggy cards.
- */
- reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
- reg |= PCI_EXP_LNKCTL_RL;
- advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
-
- ret = advk_pcie_wait_for_link(pcie);
- if (ret)
- return ret;
-
- reg = advk_read16(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKSTA);
- neg_gen = reg & PCI_EXP_LNKSTA_CLS;
-
- return neg_gen;
-}
-
-static void advk_pcie_train_link(struct advk_pcie *pcie)
-{
- struct device *dev = &pcie->pdev->dev;
- int neg_gen = -1, gen;
-
- /*
* Reset PCIe card via PERST# signal. Some cards are not detected
* during link training when they are in some non-initial state.
*/
@@ -359,41 +333,18 @@ static void advk_pcie_train_link(struct
* PERST# signal could have been asserted by pinctrl subsystem before
* probe() callback has been called or issued explicitly by reset gpio
* function advk_pcie_issue_perst(), making the endpoint going into
- * fundamental reset. As required by PCI Express spec a delay for at
- * least 100ms after such a reset before link training is needed.
- */
- msleep(PCI_PM_D3COLD_WAIT);
-
- /*
- * Try link training at link gen specified by device tree property
- * 'max-link-speed'. If this fails, iteratively train at lower gen.
- */
- for (gen = pcie->link_gen; gen > 0; --gen) {
- neg_gen = advk_pcie_train_at_gen(pcie, gen);
- if (neg_gen > 0)
- break;
- }
-
- if (neg_gen < 0)
- goto err;
-
- /*
- * After successful training if negotiated gen is lower than requested,
- * train again on negotiated gen. This solves some stability issues for
- * some buggy gen1 cards.
+ * fundamental reset. As required by PCI Express spec (PCI Express
+ * Base Specification, REV. 4.0 PCI Express, February 19 2014, 6.6.1
+ * Conventional Reset) a delay for at least 100ms after such a reset
+ * before sending a Configuration Request to the device is needed.
+ * So wait until PCIe link is up. Function advk_pcie_wait_for_link()
+ * waits for link at least 900ms.
*/
- if (neg_gen < gen) {
- gen = neg_gen;
- neg_gen = advk_pcie_train_at_gen(pcie, gen);
- }
-
- if (neg_gen == gen) {
- dev_info(dev, "link up at gen %i\n", gen);
- return;
- }
-
-err:
- dev_err(dev, "link never came up\n");
+ ret = advk_pcie_wait_for_link(pcie);
+ if (ret < 0)
+ dev_err(dev, "link never came up\n");
+ else
+ dev_info(dev, "link up\n");
}
/*
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 31/69] PCI: aardvark: Fix checking for link up via LTSSM state
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 30/69] PCI: aardvark: Fix link training Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 32/69] pinctrl: armada-37xx: Correct mpp definitions Greg Kroah-Hartman
` (44 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Marek Behún,
Lorenzo Pieralisi, Remi Pommarel
From: Pali Rohár <pali@kernel.org>
commit 661c399a651c11aaf83c45cbfe0b4a1fb7bc3179 upstream.
Current implementation of advk_pcie_link_up() is wrong as it marks also
link disabled or hot reset states as link up.
Fix it by marking link up only to those states which are defined in PCIe
Base specification 3.0, Table 4-14: Link Status Mapped to the LTSSM.
To simplify implementation, Define macros for every LTSSM state which
aardvark hardware can return in CFG_REG register.
Fix also checking for link training according to the same Table 4-14.
Define a new function advk_pcie_link_training() for this purpose.
Link: https://lore.kernel.org/r/20211005180952.6812-13-kabel@kernel.org
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
Cc: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 71 ++++++++++++++++++++++++++++++++--
1 file changed, 67 insertions(+), 4 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -151,9 +151,50 @@
#define CFG_REG (LMI_BASE_ADDR + 0x0)
#define LTSSM_SHIFT 24
#define LTSSM_MASK 0x3f
-#define LTSSM_L0 0x10
#define RC_BAR_CONFIG 0x300
+/* LTSSM values in CFG_REG */
+enum {
+ LTSSM_DETECT_QUIET = 0x0,
+ LTSSM_DETECT_ACTIVE = 0x1,
+ LTSSM_POLLING_ACTIVE = 0x2,
+ LTSSM_POLLING_COMPLIANCE = 0x3,
+ LTSSM_POLLING_CONFIGURATION = 0x4,
+ LTSSM_CONFIG_LINKWIDTH_START = 0x5,
+ LTSSM_CONFIG_LINKWIDTH_ACCEPT = 0x6,
+ LTSSM_CONFIG_LANENUM_ACCEPT = 0x7,
+ LTSSM_CONFIG_LANENUM_WAIT = 0x8,
+ LTSSM_CONFIG_COMPLETE = 0x9,
+ LTSSM_CONFIG_IDLE = 0xa,
+ LTSSM_RECOVERY_RCVR_LOCK = 0xb,
+ LTSSM_RECOVERY_SPEED = 0xc,
+ LTSSM_RECOVERY_RCVR_CFG = 0xd,
+ LTSSM_RECOVERY_IDLE = 0xe,
+ LTSSM_L0 = 0x10,
+ LTSSM_RX_L0S_ENTRY = 0x11,
+ LTSSM_RX_L0S_IDLE = 0x12,
+ LTSSM_RX_L0S_FTS = 0x13,
+ LTSSM_TX_L0S_ENTRY = 0x14,
+ LTSSM_TX_L0S_IDLE = 0x15,
+ LTSSM_TX_L0S_FTS = 0x16,
+ LTSSM_L1_ENTRY = 0x17,
+ LTSSM_L1_IDLE = 0x18,
+ LTSSM_L2_IDLE = 0x19,
+ LTSSM_L2_TRANSMIT_WAKE = 0x1a,
+ LTSSM_DISABLED = 0x20,
+ LTSSM_LOOPBACK_ENTRY_MASTER = 0x21,
+ LTSSM_LOOPBACK_ACTIVE_MASTER = 0x22,
+ LTSSM_LOOPBACK_EXIT_MASTER = 0x23,
+ LTSSM_LOOPBACK_ENTRY_SLAVE = 0x24,
+ LTSSM_LOOPBACK_ACTIVE_SLAVE = 0x25,
+ LTSSM_LOOPBACK_EXIT_SLAVE = 0x26,
+ LTSSM_HOT_RESET = 0x27,
+ LTSSM_RECOVERY_EQUALIZATION_PHASE0 = 0x28,
+ LTSSM_RECOVERY_EQUALIZATION_PHASE1 = 0x29,
+ LTSSM_RECOVERY_EQUALIZATION_PHASE2 = 0x2a,
+ LTSSM_RECOVERY_EQUALIZATION_PHASE3 = 0x2b,
+};
+
/* PCIe core controller registers */
#define CTRL_CORE_BASE_ADDR 0x18000
#define CTRL_CONFIG_REG (CTRL_CORE_BASE_ADDR + 0x0)
@@ -247,13 +288,35 @@ static inline u32 advk_readl(struct advk
return readl(pcie->base + reg);
}
-static int advk_pcie_link_up(struct advk_pcie *pcie)
+static u8 advk_pcie_ltssm_state(struct advk_pcie *pcie)
{
- u32 val, ltssm_state;
+ u32 val;
+ u8 ltssm_state;
val = advk_readl(pcie, CFG_REG);
ltssm_state = (val >> LTSSM_SHIFT) & LTSSM_MASK;
- return ltssm_state >= LTSSM_L0;
+ return ltssm_state;
+}
+
+static inline bool advk_pcie_link_up(struct advk_pcie *pcie)
+{
+ /* check if LTSSM is in normal operation - some L* state */
+ u8 ltssm_state = advk_pcie_ltssm_state(pcie);
+ return ltssm_state >= LTSSM_L0 && ltssm_state < LTSSM_DISABLED;
+}
+
+static inline bool advk_pcie_link_training(struct advk_pcie *pcie)
+{
+ /*
+ * According to PCIe Base specification 3.0, Table 4-14: Link
+ * Status Mapped to the LTSSM is Link Training mapped to LTSSM
+ * Configuration and Recovery states.
+ */
+ u8 ltssm_state = advk_pcie_ltssm_state(pcie);
+ return ((ltssm_state >= LTSSM_CONFIG_LINKWIDTH_START &&
+ ltssm_state < LTSSM_L0) ||
+ (ltssm_state >= LTSSM_RECOVERY_EQUALIZATION_PHASE0 &&
+ ltssm_state <= LTSSM_RECOVERY_EQUALIZATION_PHASE3));
}
static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 32/69] pinctrl: armada-37xx: Correct mpp definitions
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 31/69] PCI: aardvark: Fix checking for link up via LTSSM state Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 33/69] pinctrl: armada-37xx: add missing pin: PCIe1 Wakeup Greg Kroah-Hartman
` (43 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, Gregory CLEMENT,
Miquel Raynal, Linus Walleij, Marek Behún
From: Marek Behún <marek.behun@nic.cz>
commit 823868fceae3bac07cf5eccb128d6916e7a5ae9d upstream.
This is a cleanup and fix of the patch by Ken Ma <make@marvell.com>.
Fix the mpp definitions according to newest revision of the
specification:
- northbridge:
fix pmic1 gpio number to 7
fix pmic0 gpio number to 6
- southbridge
split pcie1 group bit mask to BIT(5) and BIT(9)
fix ptp group bit mask to BIT(11) | BIT(12) | BIT(13)
add smi group with bit mask BIT(4)
[gregory: split the pcie group in 2, as at hardware level they can be
configured separately]
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt | 18 +++++++---
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 10 +++--
2 files changed, 19 insertions(+), 9 deletions(-)
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -58,11 +58,11 @@ group pwm3
- functions pwm, gpio
group pmic1
- - pin 17
+ - pin 7
- functions pmic, gpio
group pmic0
- - pin 16
+ - pin 6
- functions pmic, gpio
group i2c2
@@ -112,17 +112,25 @@ group usb2_drvvbus1
- functions drvbus, gpio
group sdio_sb
- - pins 60-64
+ - pins 60-65
- functions sdio, gpio
group rgmii
- - pins 42-55
+ - pins 42-53
- functions mii, gpio
group pcie1
- - pins 39-40
+ - pins 39
+ - functions pcie, gpio
+
+group pcie1_clkreq
+ - pins 40
- functions pcie, gpio
+group smi
+ - pins 54-55
+ - functions smi, gpio
+
group ptp
- pins 56-58
- functions ptp, gpio
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -170,8 +170,8 @@ static struct armada_37xx_pin_group arma
PIN_GRP_GPIO("pwm1", 12, 1, BIT(4), "pwm"),
PIN_GRP_GPIO("pwm2", 13, 1, BIT(5), "pwm"),
PIN_GRP_GPIO("pwm3", 14, 1, BIT(6), "pwm"),
- PIN_GRP_GPIO("pmic1", 17, 1, BIT(7), "pmic"),
- PIN_GRP_GPIO("pmic0", 16, 1, BIT(8), "pmic"),
+ PIN_GRP_GPIO("pmic1", 7, 1, BIT(7), "pmic"),
+ PIN_GRP_GPIO("pmic0", 6, 1, BIT(8), "pmic"),
PIN_GRP_GPIO("i2c2", 2, 2, BIT(9), "i2c"),
PIN_GRP_GPIO("i2c1", 0, 2, BIT(10), "i2c"),
PIN_GRP_GPIO("spi_cs1", 17, 1, BIT(12), "spi"),
@@ -195,8 +195,10 @@ static struct armada_37xx_pin_group arma
PIN_GRP_GPIO("usb2_drvvbus1", 1, 1, BIT(1), "drvbus"),
PIN_GRP_GPIO("sdio_sb", 24, 6, BIT(2), "sdio"),
PIN_GRP_GPIO("rgmii", 6, 12, BIT(3), "mii"),
- PIN_GRP_GPIO("pcie1", 3, 2, BIT(4), "pcie"),
- PIN_GRP_GPIO("ptp", 20, 3, BIT(5), "ptp"),
+ PIN_GRP_GPIO("smi", 18, 2, BIT(4), "smi"),
+ PIN_GRP_GPIO("pcie1", 3, 1, BIT(5), "pcie"),
+ PIN_GRP_GPIO("pcie1_clkreq", 4, 1, BIT(9), "pcie"),
+ PIN_GRP_GPIO("ptp", 20, 3, BIT(11) | BIT(12) | BIT(13), "ptp"),
PIN_GRP("ptp_clk", 21, 1, BIT(6), "ptp", "mii"),
PIN_GRP("ptp_trig", 22, 1, BIT(7), "ptp", "mii"),
PIN_GRP_GPIO_3("mii_col", 23, 1, BIT(8) | BIT(14), 0, BIT(8), BIT(14),
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 33/69] pinctrl: armada-37xx: add missing pin: PCIe1 Wakeup
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 32/69] pinctrl: armada-37xx: Correct mpp definitions Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 34/69] pinctrl: armada-37xx: Correct PWM pins definitions Greg Kroah-Hartman
` (42 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gregory CLEMENT, Miquel Raynal,
Linus Walleij, Marek Behún
From: Gregory CLEMENT <gregory.clement@bootlin.com>
commit 4d98fbaacd79a82f408febb66a9c42fe42361b16 upstream.
Declare the PCIe1 Wakeup which was initially missing.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -198,6 +198,7 @@ static struct armada_37xx_pin_group arma
PIN_GRP_GPIO("smi", 18, 2, BIT(4), "smi"),
PIN_GRP_GPIO("pcie1", 3, 1, BIT(5), "pcie"),
PIN_GRP_GPIO("pcie1_clkreq", 4, 1, BIT(9), "pcie"),
+ PIN_GRP_GPIO("pcie1_wakeup", 5, 1, BIT(10), "pcie"),
PIN_GRP_GPIO("ptp", 20, 3, BIT(11) | BIT(12) | BIT(13), "ptp"),
PIN_GRP("ptp_clk", 21, 1, BIT(6), "ptp", "mii"),
PIN_GRP("ptp_trig", 22, 1, BIT(7), "ptp", "mii"),
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 34/69] pinctrl: armada-37xx: Correct PWM pins definitions
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 33/69] pinctrl: armada-37xx: add missing pin: PCIe1 Wakeup Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 35/69] arm64: dts: marvell: armada-37xx: declare PCIe reset pin Greg Kroah-Hartman
` (41 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, Rob Herring, Linus Walleij
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 3627 bytes --]
From: "Marek Behún" <kabel@kernel.org>
commit baf8d6899b1e8906dc076ef26cc633e96a8bb0c3 upstream.
The PWM pins on North Bridge on Armada 37xx can be configured into PWM
or GPIO functions. When in PWM function, each pin can also be configured
to drive low on 0 and tri-state on 1 (LED mode).
The current definitions handle this by declaring two pin groups for each
pin:
- group "pwmN" with functions "pwm" and "gpio"
- group "ledN_od" ("od" for open drain) with functions "led" and "gpio"
This is semantically incorrect. The correct definition for each pin
should be one group with three functions: "pwm", "led" and "gpio".
Change the "pwmN" groups to support "led" function.
Remove "ledN_od" groups. This cannot break backwards compatibility with
older device trees: no device tree uses it since there is no PWM driver
for this SOC yet. Also "ledN_od" groups are not even documented.
Fixes: b835d6953009 ("pinctrl: armada-37xx: swap polarity on LED group")
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210719112938.27594-1-kabel@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt | 8 ++--
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 17 ++++------
2 files changed, 12 insertions(+), 13 deletions(-)
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -43,19 +43,19 @@ group emmc_nb
group pwm0
- pin 11 (GPIO1-11)
- - functions pwm, gpio
+ - functions pwm, led, gpio
group pwm1
- pin 12
- - functions pwm, gpio
+ - functions pwm, led, gpio
group pwm2
- pin 13
- - functions pwm, gpio
+ - functions pwm, led, gpio
group pwm3
- pin 14
- - functions pwm, gpio
+ - functions pwm, led, gpio
group pmic1
- pin 7
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -166,10 +166,14 @@ static struct armada_37xx_pin_group arma
PIN_GRP_GPIO("jtag", 20, 5, BIT(0), "jtag"),
PIN_GRP_GPIO("sdio0", 8, 3, BIT(1), "sdio"),
PIN_GRP_GPIO("emmc_nb", 27, 9, BIT(2), "emmc"),
- PIN_GRP_GPIO("pwm0", 11, 1, BIT(3), "pwm"),
- PIN_GRP_GPIO("pwm1", 12, 1, BIT(4), "pwm"),
- PIN_GRP_GPIO("pwm2", 13, 1, BIT(5), "pwm"),
- PIN_GRP_GPIO("pwm3", 14, 1, BIT(6), "pwm"),
+ PIN_GRP_GPIO_3("pwm0", 11, 1, BIT(3) | BIT(20), 0, BIT(20), BIT(3),
+ "pwm", "led"),
+ PIN_GRP_GPIO_3("pwm1", 12, 1, BIT(4) | BIT(21), 0, BIT(21), BIT(4),
+ "pwm", "led"),
+ PIN_GRP_GPIO_3("pwm2", 13, 1, BIT(5) | BIT(22), 0, BIT(22), BIT(5),
+ "pwm", "led"),
+ PIN_GRP_GPIO_3("pwm3", 14, 1, BIT(6) | BIT(23), 0, BIT(23), BIT(6),
+ "pwm", "led"),
PIN_GRP_GPIO("pmic1", 7, 1, BIT(7), "pmic"),
PIN_GRP_GPIO("pmic0", 6, 1, BIT(8), "pmic"),
PIN_GRP_GPIO("i2c2", 2, 2, BIT(9), "i2c"),
@@ -183,11 +187,6 @@ static struct armada_37xx_pin_group arma
PIN_GRP_EXTRA("uart2", 9, 2, BIT(1) | BIT(13) | BIT(14) | BIT(19),
BIT(1) | BIT(13) | BIT(14), BIT(1) | BIT(19),
18, 2, "gpio", "uart"),
- PIN_GRP_GPIO_2("led0_od", 11, 1, BIT(20), BIT(20), 0, "led"),
- PIN_GRP_GPIO_2("led1_od", 12, 1, BIT(21), BIT(21), 0, "led"),
- PIN_GRP_GPIO_2("led2_od", 13, 1, BIT(22), BIT(22), 0, "led"),
- PIN_GRP_GPIO_2("led3_od", 14, 1, BIT(23), BIT(23), 0, "led"),
-
};
static struct armada_37xx_pin_group armada_37xx_sb_groups[] = {
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 35/69] arm64: dts: marvell: armada-37xx: declare PCIe reset pin
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 34/69] pinctrl: armada-37xx: Correct PWM pins definitions Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 36/69] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function Greg Kroah-Hartman
` (40 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miquel Raynal, Gregory CLEMENT,
Marek Behún
From: Miquel Raynal <miquel.raynal@bootlin.com>
commit a5470af981a0cc14a650af8da5186668971a4fc8 upstream.
One pin can be muxed as PCIe endpoint card reset.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -254,6 +254,15 @@
function = "mii";
};
+ pcie_reset_pins: pcie-reset-pins {
+ groups = "pcie1";
+ function = "pcie";
+ };
+
+ pcie_clkreq_pins: pcie-clkreq-pins {
+ groups = "pcie1_clkreq";
+ function = "pcie";
+ };
};
eth0: ethernet@30000 {
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 36/69] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 35/69] arm64: dts: marvell: armada-37xx: declare PCIe reset pin Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 37/69] netfilter: ipvs: Fix reuse connection if RS weight is 0 Greg Kroah-Hartman
` (39 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, Remi Pommarel,
Tomasz Maciej Nowak, Thomas Petazzoni, Gregory CLEMENT,
Marek Behún
From: Marek Behún <marek.behun@nic.cz>
commit 715878016984b2617f6c1f177c50039e12e7bd5b upstream.
We found out that we are unable to control the PERST# signal via the
default pin dedicated to be PERST# pin (GPIO2[3] pin) on A3700 SOC when
this pin is in EP_PCIE1_Resetn mode. There is a register in the PCIe
register space called PERSTN_GPIO_EN (D0088004[3]), but changing the
value of this register does not change the pin output when measuring
with voltmeter.
We do not know if this is a bug in the SOC, or if it works only when
PCIe controller is in a certain state.
Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready
before training link") says that when this pin changes pinctrl mode
from EP_PCIE1_Resetn to GPIO, the PERST# signal is asserted for a brief
moment.
So currently the situation is that on A3700 boards the PERST# signal is
asserted in U-Boot (because the code in U-Boot issues reset via this pin
via GPIO mode), and then in Linux by the obscure and undocumented
mechanism described by the above mentioned commit.
We want to issue PERST# signal in a known way, therefore this patch
changes the pcie_reset_pin function from "pcie" to "gpio" and adds the
reset-gpios property to the PCIe node in device tree files of
EspressoBin and Armada 3720 Dev Board (Turris Mox device tree already
has this property and uDPU does not have a PCIe port).
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Remi Pommarel <repk@triplefau.lt>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/marvell/armada-3720-db.dts | 3 +++
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 3 +++
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +-
3 files changed, 7 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -128,6 +128,9 @@
/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "okay";
};
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -55,6 +55,9 @@
/* J9 */
&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "okay";
};
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -256,7 +256,7 @@
pcie_reset_pins: pcie-reset-pins {
groups = "pcie1";
- function = "pcie";
+ function = "gpio";
};
pcie_clkreq_pins: pcie-clkreq-pins {
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 37/69] netfilter: ipvs: Fix reuse connection if RS weight is 0
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 36/69] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 38/69] ARM: dts: BCM5301X: Fix I2C controller interrupt Greg Kroah-Hartman
` (38 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chuanqi Liu, yangxingwu,
Simon Horman, Julian Anastasov, Pablo Neira Ayuso, Sasha Levin
From: yangxingwu <xingwu.yang@gmail.com>
[ Upstream commit c95c07836fa4c1767ed11d8eca0769c652760e32 ]
We are changing expire_nodest_conn to work even for reused connections when
conn_reuse_mode=0, just as what was done with commit dc7b3eb900aa ("ipvs:
Fix reuse connection if real server is dead").
For controlled and persistent connections, the new connection will get the
needed real server depending on the rules in ip_vs_check_template().
Fixes: d752c3645717 ("ipvs: allow rescheduling of new connections when port reuse is detected")
Co-developed-by: Chuanqi Liu <legend050709@qq.com>
Signed-off-by: Chuanqi Liu <legend050709@qq.com>
Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/networking/ipvs-sysctl.txt | 3 +--
net/netfilter/ipvs/ip_vs_core.c | 8 ++++----
2 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt
index 056898685d408..fc531c29a2e83 100644
--- a/Documentation/networking/ipvs-sysctl.txt
+++ b/Documentation/networking/ipvs-sysctl.txt
@@ -30,8 +30,7 @@ conn_reuse_mode - INTEGER
0: disable any special handling on port reuse. The new
connection will be delivered to the same real server that was
- servicing the previous connection. This will effectively
- disable expire_nodest_conn.
+ servicing the previous connection.
bit 1: enable rescheduling of new connections when it is safe.
That is, whenever expire_nodest_conn and for TCP sockets, when
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index acaeeaf814415..f20b08db9fe91 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -1850,7 +1850,6 @@ ip_vs_in(struct netns_ipvs *ipvs, unsigned int hooknum, struct sk_buff *skb, int
struct ip_vs_proto_data *pd;
struct ip_vs_conn *cp;
int ret, pkts;
- int conn_reuse_mode;
struct sock *sk;
/* Already marked as IPVS request or reply? */
@@ -1926,15 +1925,16 @@ ip_vs_in(struct netns_ipvs *ipvs, unsigned int hooknum, struct sk_buff *skb, int
*/
cp = pp->conn_in_get(ipvs, af, skb, &iph);
- conn_reuse_mode = sysctl_conn_reuse_mode(ipvs);
- if (conn_reuse_mode && !iph.fragoffs && is_new_conn(skb, &iph) && cp) {
+ if (!iph.fragoffs && is_new_conn(skb, &iph) && cp) {
+ int conn_reuse_mode = sysctl_conn_reuse_mode(ipvs);
bool old_ct = false, resched = false;
if (unlikely(sysctl_expire_nodest_conn(ipvs)) && cp->dest &&
unlikely(!atomic_read(&cp->dest->weight))) {
resched = true;
old_ct = ip_vs_conn_uses_old_conntrack(cp, skb);
- } else if (is_new_conn_expected(cp, conn_reuse_mode)) {
+ } else if (conn_reuse_mode &&
+ is_new_conn_expected(cp, conn_reuse_mode)) {
old_ct = ip_vs_conn_uses_old_conntrack(cp, skb);
if (!atomic_read(&cp->n_control)) {
resched = true;
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 38/69] ARM: dts: BCM5301X: Fix I2C controller interrupt
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 37/69] netfilter: ipvs: Fix reuse connection if RS weight is 0 Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 39/69] ARM: dts: BCM5301X: Add interrupt properties to GPIO node Greg Kroah-Hartman
` (37 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christian Lamparter,
Florian Fainelli, Sasha Levin
From: Florian Fainelli <f.fainelli@gmail.com>
[ Upstream commit 754c4050a00e802e122690112fc2c3a6abafa7e2 ]
The I2C interrupt controller line is off by 32 because the datasheet
describes interrupt inputs into the GIC which are for Shared Peripheral
Interrupts and are starting at offset 32. The ARM GIC binding expects
the SPI interrupts to be numbered from 0 relative to the SPI base.
Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT")
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index fa3422c4caec1..bb8b15e42fe93 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -384,7 +384,7 @@ usb3_dmp: syscon@18105000 {
i2c0: i2c@18009000 {
compatible = "brcm,iproc-i2c";
reg = <0x18009000 0x50>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 39/69] ARM: dts: BCM5301X: Add interrupt properties to GPIO node
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 38/69] ARM: dts: BCM5301X: Fix I2C controller interrupt Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 40/69] ASoC: qdsp6: q6routing: Conditionally reset FrontEnd Mixer Greg Kroah-Hartman
` (36 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Florian Fainelli, Sasha Levin
From: Florian Fainelli <f.fainelli@gmail.com>
[ Upstream commit 40f7342f0587639e5ad625adaa15efdd3cffb18f ]
The GPIO controller is also an interrupt controller provider and is
currently missing the appropriate 'interrupt-controller' and
'#interrupt-cells' properties to denote that.
Fixes: fb026d3de33b ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/bcm5301x.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index bb8b15e42fe93..6edc4bd1e7eaf 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -239,6 +239,8 @@ chipcommon: chipcommon@0 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
pcie0: pcie@12000 {
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 40/69] ASoC: qdsp6: q6routing: Conditionally reset FrontEnd Mixer
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 39/69] ARM: dts: BCM5301X: Add interrupt properties to GPIO node Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 41/69] ASoC: topology: Add missing rwsem around snd_ctl_remove() calls Greg Kroah-Hartman
` (35 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Srinivas Kandagatla, Mark Brown, Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit 861afeac7990587588d057b2c0b3222331c3da29 ]
Stream IDs are reused across multiple BackEnd mixers, do not reset the
stream mixers if they are not already set for that particular FrontEnd.
Ex:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below
command will reset previously setup MultiMedia1 stream, because both of them
are using MultiMedia1 PCM stream.
amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0
reset the FrontEnd Mixers conditionally to fix this issue.
This is more noticeable in desktop setup, where in alsactl tries to restore
the alsa state and overwriting the previous mixer settings.
Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114721.12517-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/qcom/qdsp6/q6routing.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c
index 44eee18c658ae..7d2c5de380317 100644
--- a/sound/soc/qcom/qdsp6/q6routing.c
+++ b/sound/soc/qcom/qdsp6/q6routing.c
@@ -443,7 +443,11 @@ static int msm_routing_put_audio_mixer(struct snd_kcontrol *kcontrol,
session->port_id = be_id;
snd_soc_dapm_mixer_update_power(dapm, kcontrol, 1, update);
} else {
- session->port_id = -1;
+ if (session->port_id == be_id) {
+ session->port_id = -1;
+ return 0;
+ }
+
snd_soc_dapm_mixer_update_power(dapm, kcontrol, 0, update);
}
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 41/69] ASoC: topology: Add missing rwsem around snd_ctl_remove() calls
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 40/69] ASoC: qdsp6: q6routing: Conditionally reset FrontEnd Mixer Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 42/69] net: ieee802154: handle iftypes as u32 Greg Kroah-Hartman
` (34 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Takashi Iwai, Mark Brown, Sasha Levin
From: Takashi Iwai <tiwai@suse.de>
[ Upstream commit 7e567b5ae06315ef2d70666b149962e2bb4b97af ]
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: 8a9782346dcc ("ASoC: topology: Add topology core")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211116071812.18109-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/soc-topology.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 2c6598e07dde3..ccf6dd9411975 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2565,6 +2565,7 @@ EXPORT_SYMBOL_GPL(snd_soc_tplg_widget_remove_all);
/* remove dynamic controls from the component driver */
int snd_soc_tplg_component_remove(struct snd_soc_component *comp, u32 index)
{
+ struct snd_card *card = comp->card->snd_card;
struct snd_soc_dobj *dobj, *next_dobj;
int pass = SOC_TPLG_PASS_END;
@@ -2572,6 +2573,7 @@ int snd_soc_tplg_component_remove(struct snd_soc_component *comp, u32 index)
while (pass >= SOC_TPLG_PASS_START) {
/* remove mixer controls */
+ down_write(&card->controls_rwsem);
list_for_each_entry_safe(dobj, next_dobj, &comp->dobj_list,
list) {
@@ -2605,6 +2607,7 @@ int snd_soc_tplg_component_remove(struct snd_soc_component *comp, u32 index)
break;
}
}
+ up_write(&card->controls_rwsem);
pass--;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 42/69] net: ieee802154: handle iftypes as u32
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 41/69] ASoC: topology: Add missing rwsem around snd_ctl_remove() calls Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 43/69] firmware: arm_scmi: pm: Propagate return value to caller Greg Kroah-Hartman
` (33 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Aring, Stefan Schmidt, Sasha Levin
From: Alexander Aring <aahringo@redhat.com>
[ Upstream commit 451dc48c806a7ce9fbec5e7a24ccf4b2c936e834 ]
This patch fixes an issue that an u32 netlink value is handled as a
signed enum value which doesn't fit into the range of u32 netlink type.
If it's handled as -1 value some BIT() evaluation ends in a
shift-out-of-bounds issue. To solve the issue we set the to u32 max which
is s32 "-1" value to keep backwards compatibility and let the followed enum
values start counting at 0. This brings the compiler to never handle the
enum as signed and a check if the value is above NL802154_IFTYPE_MAX should
filter -1 out.
Fixes: f3ea5e44231a ("ieee802154: add new interface command")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20211112030916.685793-1-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/nl802154.h | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/include/net/nl802154.h b/include/net/nl802154.h
index ddcee128f5d9a..145acb8f25095 100644
--- a/include/net/nl802154.h
+++ b/include/net/nl802154.h
@@ -19,6 +19,8 @@
*
*/
+#include <linux/types.h>
+
#define NL802154_GENL_NAME "nl802154"
enum nl802154_commands {
@@ -150,10 +152,9 @@ enum nl802154_attrs {
};
enum nl802154_iftype {
- /* for backwards compatibility TODO */
- NL802154_IFTYPE_UNSPEC = -1,
+ NL802154_IFTYPE_UNSPEC = (~(__u32)0),
- NL802154_IFTYPE_NODE,
+ NL802154_IFTYPE_NODE = 0,
NL802154_IFTYPE_MONITOR,
NL802154_IFTYPE_COORD,
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 43/69] firmware: arm_scmi: pm: Propagate return value to caller
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 42/69] net: ieee802154: handle iftypes as u32 Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 44/69] NFSv42: Dont fail clone() unless the OP_CLONE operation failed Greg Kroah-Hartman
` (32 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peng Fan, Sudeep Holla, Sasha Levin
From: Peng Fan <peng.fan@nxp.com>
[ Upstream commit 1446fc6c678e8d8b31606a4b877abe205f344b38 ]
of_genpd_add_provider_onecell may return error, so let's propagate
its return value to caller
Link: https://lore.kernel.org/r/20211116064227.20571-1-peng.fan@oss.nxp.com
Fixes: 898216c97ed2 ("firmware: arm_scmi: add device power domain support using genpd")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/arm_scmi/scmi_pm_domain.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/firmware/arm_scmi/scmi_pm_domain.c b/drivers/firmware/arm_scmi/scmi_pm_domain.c
index 041f8152272bf..177874adccf0d 100644
--- a/drivers/firmware/arm_scmi/scmi_pm_domain.c
+++ b/drivers/firmware/arm_scmi/scmi_pm_domain.c
@@ -106,9 +106,7 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
scmi_pd_data->domains = domains;
scmi_pd_data->num_domains = num_domains;
- of_genpd_add_provider_onecell(np, scmi_pd_data);
-
- return 0;
+ return of_genpd_add_provider_onecell(np, scmi_pd_data);
}
static const struct scmi_device_id scmi_id_table[] = {
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 44/69] NFSv42: Dont fail clone() unless the OP_CLONE operation failed
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 43/69] firmware: arm_scmi: pm: Propagate return value to caller Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 45/69] ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE Greg Kroah-Hartman
` (31 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Trond Myklebust, Sasha Levin
From: Trond Myklebust <trond.myklebust@hammerspace.com>
[ Upstream commit d3c45824ad65aebf765fcf51366d317a29538820 ]
The failure to retrieve post-op attributes has no bearing on whether or
not the clone operation itself was successful. We must therefore ignore
the return value of decode_getfattr() when looking at the success or
failure of nfs4_xdr_dec_clone().
Fixes: 36022770de6c ("nfs42: add CLONE xdr functions")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/nfs42xdr.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/nfs/nfs42xdr.c b/fs/nfs/nfs42xdr.c
index ec9803088f6b8..eee011de3f58b 100644
--- a/fs/nfs/nfs42xdr.c
+++ b/fs/nfs/nfs42xdr.c
@@ -707,8 +707,7 @@ static int nfs4_xdr_dec_clone(struct rpc_rqst *rqstp,
status = decode_clone(xdr);
if (status)
goto out;
- status = decode_getfattr(xdr, res->dst_fattr, res->server);
-
+ decode_getfattr(xdr, res->dst_fattr, res->server);
out:
res->rpc_status = status;
return status;
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 45/69] ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 44/69] NFSv42: Dont fail clone() unless the OP_CLONE operation failed Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 46/69] scsi: mpt3sas: Fix kernel panic during drive powercycle test Greg Kroah-Hartman
` (30 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kees Cook, Takashi Iwai, Dinh Nguyen,
Sasha Levin
From: Takashi Iwai <tiwai@suse.de>
[ Upstream commit 187bea472600dcc8d2eb714335053264dd437172 ]
When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential
buffer overflow and panics. The code in sofcpga bootstrapping
contains the memcpy() calls are mistakenly translated as the shorter
size, hence it triggers a panic as if it were overflowing.
This patch changes the secondary_trampoline and *_end definitions
to arrays for avoiding the false-positive crash above.
Fixes: 9c4566a117a6 ("ARM: socfpga: Enable SMP for socfpga")
Suggested-by: Kees Cook <keescook@chromium.org>
Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473
Link: https://lore.kernel.org/r/20211117193244.31162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-socfpga/core.h | 2 +-
arch/arm/mach-socfpga/platsmp.c | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index 65e1817d8afe6..692a287a8712d 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -48,7 +48,7 @@ extern void __iomem *sdr_ctl_base_addr;
u32 socfpga_sdram_self_refresh(u32 sdr_base);
extern unsigned int socfpga_sdram_self_refresh_sz;
-extern char secondary_trampoline, secondary_trampoline_end;
+extern char secondary_trampoline[], secondary_trampoline_end[];
extern unsigned long socfpga_cpu1start_addr;
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
index 0ee76772b5074..a272999ce04b9 100644
--- a/arch/arm/mach-socfpga/platsmp.c
+++ b/arch/arm/mach-socfpga/platsmp.c
@@ -31,14 +31,14 @@
static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+ int trampoline_size = secondary_trampoline_end - secondary_trampoline;
if (socfpga_cpu1start_addr) {
/* This will put CPU #1 into reset. */
writel(RSTMGR_MPUMODRST_CPU1,
rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
- memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+ memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
writel(__pa_symbol(secondary_startup),
sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
@@ -56,12 +56,12 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+ int trampoline_size = secondary_trampoline_end - secondary_trampoline;
if (socfpga_cpu1start_addr) {
writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
SOCFPGA_A10_RSTMGR_MODMPURST);
- memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+ memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
writel(__pa_symbol(secondary_startup),
sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 46/69] scsi: mpt3sas: Fix kernel panic during drive powercycle test
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 45/69] ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 47/69] drm/vc4: fix error code in vc4_create_object() Greg Kroah-Hartman
` (29 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sreekanth Reddy, Martin K. Petersen,
Sasha Levin
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
[ Upstream commit 0ee4ba13e09c9d9c1cb6abb59da8295d9952328b ]
While looping over shost's sdev list it is possible that one
of the drives is getting removed and its sas_target object is
freed but its sdev object remains intact.
Consequently, a kernel panic can occur while the driver is trying to access
the sas_address field of sas_target object without also checking the
sas_target object for NULL.
Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com
Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index add699b01836f..d899f216245e5 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3364,7 +3364,7 @@ _scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address)
shost_for_each_device(sdev, ioc->shost) {
sas_device_priv_data = sdev->hostdata;
- if (!sas_device_priv_data)
+ if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
continue;
if (sas_device_priv_data->sas_target->sas_address
!= sas_address)
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 47/69] drm/vc4: fix error code in vc4_create_object()
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 46/69] scsi: mpt3sas: Fix kernel panic during drive powercycle test Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 48/69] ipv6: fix typos in __ip6_finish_output() Greg Kroah-Hartman
` (28 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Maxime Ripard, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 96c5f82ef0a145d3e56e5b26f2bf6dcd2ffeae1c ]
The ->gem_create_object() functions are supposed to return NULL if there
is an error. None of the callers expect error pointers so returing one
will lead to an Oops. See drm_gem_vram_create(), for example.
Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118111416.GC1147@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/vc4/vc4_bo.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vc4/vc4_bo.c b/drivers/gpu/drm/vc4/vc4_bo.c
index 8dcce7182bb7c..1e28ff9815997 100644
--- a/drivers/gpu/drm/vc4/vc4_bo.c
+++ b/drivers/gpu/drm/vc4/vc4_bo.c
@@ -417,7 +417,7 @@ struct drm_gem_object *vc4_create_object(struct drm_device *dev, size_t size)
bo = kzalloc(sizeof(*bo), GFP_KERNEL);
if (!bo)
- return ERR_PTR(-ENOMEM);
+ return NULL;
bo->madv = VC4_MADV_WILLNEED;
refcount_set(&bo->usecnt, 0);
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 48/69] ipv6: fix typos in __ip6_finish_output()
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 47/69] drm/vc4: fix error code in vc4_create_object() Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 49/69] net/smc: Ensure the active closing peer first closes clcsock Greg Kroah-Hartman
` (27 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Tobias Brunner,
Steffen Klassert, David Ahern, David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 19d36c5f294879949c9d6f57cb61d39cc4c48553 ]
We deal with IPv6 packets, so we need to use IP6CB(skb)->flags and
IP6SKB_REROUTED, instead of IPCB(skb)->flags and IPSKB_REROUTED
Found by code inspection, please double check that fixing this bug
does not surface other bugs.
Fixes: 09ee9dba9611 ("ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tobias Brunner <tobias@strongswan.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/ip6_output.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index fc36f3b0dceb3..251ec12517e93 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -175,7 +175,7 @@ static int ip6_finish_output(struct net *net, struct sock *sk, struct sk_buff *s
#if defined(CONFIG_NETFILTER) && defined(CONFIG_XFRM)
/* Policy lookup after SNAT yielded a new policy */
if (skb_dst(skb)->xfrm) {
- IPCB(skb)->flags |= IPSKB_REROUTED;
+ IP6CB(skb)->flags |= IP6SKB_REROUTED;
return dst_output(net, sk, skb);
}
#endif
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 49/69] net/smc: Ensure the active closing peer first closes clcsock
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 48/69] ipv6: fix typos in __ip6_finish_output() Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 50/69] PM: hibernate: use correct mode for swsusp_close() Greg Kroah-Hartman
` (26 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tony Lu, Wen Gu, David S. Miller,
Sasha Levin
From: Tony Lu <tonylu@linux.alibaba.com>
[ Upstream commit 606a63c9783a32a45bd2ef0eee393711d75b3284 ]
The side that actively closed socket, it's clcsock doesn't enter
TIME_WAIT state, but the passive side does it. It should show the same
behavior as TCP sockets.
Consider this, when client actively closes the socket, the clcsock in
server enters TIME_WAIT state, which means the address is occupied and
won't be reused before TIME_WAIT dismissing. If we restarted server, the
service would be unavailable for a long time.
To solve this issue, shutdown the clcsock in [A], perform the TCP active
close progress first, before the passive closed side closing it. So that
the actively closed side enters TIME_WAIT, not the passive one.
Client | Server
close() // client actively close |
smc_release() |
smc_close_active() // PEERCLOSEWAIT1 |
smc_close_final() // abort or closed = 1|
smc_cdc_get_slot_and_msg_send() |
[A] |
|smc_cdc_msg_recv_action() // ACTIVE
| queue_work(smc_close_wq, &conn->close_work)
| smc_close_passive_work() // PROCESSABORT or APPCLOSEWAIT1
| smc_close_passive_abort_received() // only in abort
|
|close() // server recv zero, close
| smc_release() // PROCESSABORT or APPCLOSEWAIT1
| smc_close_active()
| smc_close_abort() or smc_close_final() // CLOSED
| smc_cdc_get_slot_and_msg_send() // abort or closed = 1
smc_cdc_msg_recv_action() | smc_clcsock_release()
queue_work(smc_close_wq, &conn->close_work) | sock_release(tcp) // actively close clc, enter TIME_WAIT
smc_close_passive_work() // PEERCLOSEWAIT1 | smc_conn_free()
smc_close_passive_abort_received() // CLOSED|
smc_conn_free() |
smc_clcsock_release() |
sock_release(tcp) // passive close clc |
Link: https://www.spinics.net/lists/netdev/msg780407.html
Fixes: b38d732477e4 ("smc: socket closing and linkgroup cleanup")
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/smc/smc_close.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/smc/smc_close.c b/net/smc/smc_close.c
index ea2b87f294696..e25c023582f9e 100644
--- a/net/smc/smc_close.c
+++ b/net/smc/smc_close.c
@@ -202,6 +202,12 @@ int smc_close_active(struct smc_sock *smc)
if (rc)
break;
sk->sk_state = SMC_PEERCLOSEWAIT1;
+
+ /* actively shutdown clcsock before peer close it,
+ * prevent peer from entering TIME_WAIT state.
+ */
+ if (smc->clcsock && smc->clcsock->sk)
+ rc = kernel_sock_shutdown(smc->clcsock, SHUT_RDWR);
} else {
/* peer event has changed the state */
goto again;
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 50/69] PM: hibernate: use correct mode for swsusp_close()
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 49/69] net/smc: Ensure the active closing peer first closes clcsock Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 51/69] tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows Greg Kroah-Hartman
` (25 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thomas Zeitlhofer, Rafael J. Wysocki,
Sasha Levin
From: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
[ Upstream commit cefcf24b4d351daf70ecd945324e200d3736821e ]
Commit 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in
swsusp_check()") changed the opening mode of the block device to
(FMODE_READ | FMODE_EXCL).
In the corresponding calls to swsusp_close(), the mode is still just
FMODE_READ which triggers the warning in blkdev_flush_mapping() on
resume from hibernate.
So, use the mode (FMODE_READ | FMODE_EXCL) also when closing the
device.
Fixes: 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()")
Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/power/hibernate.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 28db51274ed0e..6670a44ec5d45 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -677,7 +677,7 @@ static int load_image_and_restore(void)
goto Unlock;
error = swsusp_read(&flags);
- swsusp_close(FMODE_READ);
+ swsusp_close(FMODE_READ | FMODE_EXCL);
if (!error)
hibernation_restore(flags & SF_PLATFORM_MODE);
@@ -874,7 +874,7 @@ static int software_resume(void)
/* The snapshot device should not be opened while we're running */
if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
error = -EBUSY;
- swsusp_close(FMODE_READ);
+ swsusp_close(FMODE_READ | FMODE_EXCL);
goto Unlock;
}
@@ -910,7 +910,7 @@ static int software_resume(void)
pm_pr_dbg("Hibernation image not present or could not be loaded.\n");
return error;
Close_Finish:
- swsusp_close(FMODE_READ);
+ swsusp_close(FMODE_READ | FMODE_EXCL);
goto Finish;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 51/69] tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 50/69] PM: hibernate: use correct mode for swsusp_close() Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 52/69] MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48 Greg Kroah-Hartman
` (24 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Neal Cardwell, Eric Dumazet,
Stephen Hemminger, Yuchung Cheng, Soheil Hassas Yeganeh,
Jakub Kicinski, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 4e1fddc98d2585ddd4792b5e44433dcee7ece001 ]
While testing BIG TCP patch series, I was expecting that TCP_RR workloads
with 80KB requests/answers would send one 80KB TSO packet,
then being received as a single GRO packet.
It turns out this was not happening, and the root cause was that
cubic Hystart ACK train was triggering after a few (2 or 3) rounds of RPC.
Hystart was wrongly setting CWND/SSTHRESH to 30, while my RPC
needed a budget of ~20 segments.
Ideally these TCP_RR flows should not exit slow start.
Cubic Hystart should reset itself at each round, instead of assuming
every TCP flow is a bulk one.
Note that even after this patch, Hystart can still trigger, depending
on scheduling artifacts, but at a higher CWND/SSTHRESH threshold,
keeping optimal TSO packet sizes.
Tested:
ip link set dev eth0 gro_ipv6_max_size 131072 gso_ipv6_max_size 131072
nstat -n; netperf -H ... -t TCP_RR -l 5 -- -r 80000,80000 -K cubic; nstat|egrep "Ip6InReceives|Hystart|Ip6OutRequests"
Before:
8605
Ip6InReceives 87541 0.0
Ip6OutRequests 129496 0.0
TcpExtTCPHystartTrainDetect 1 0.0
TcpExtTCPHystartTrainCwnd 30 0.0
After:
8760
Ip6InReceives 88514 0.0
Ip6OutRequests 87975 0.0
Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3")
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20211123202535.1843771-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/tcp_cubic.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/tcp_cubic.c b/net/ipv4/tcp_cubic.c
index 8b5ba0a5cd386..93530bd332470 100644
--- a/net/ipv4/tcp_cubic.c
+++ b/net/ipv4/tcp_cubic.c
@@ -340,8 +340,6 @@ static void bictcp_cong_avoid(struct sock *sk, u32 ack, u32 acked)
return;
if (tcp_in_slow_start(tp)) {
- if (hystart && after(ack, ca->end_seq))
- bictcp_hystart_reset(sk);
acked = tcp_slow_start(tp, acked);
if (!acked)
return;
@@ -383,6 +381,9 @@ static void hystart_update(struct sock *sk, u32 delay)
if (ca->found & hystart_detect)
return;
+ if (after(tp->snd_una, ca->end_seq))
+ bictcp_hystart_reset(sk);
+
if (hystart_detect & HYSTART_ACK_TRAIN) {
u32 now = bictcp_clock();
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 52/69] MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 51/69] tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 53/69] net/smc: Dont call clcsock shutdown twice when smc shutdown Greg Kroah-Hartman
` (23 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Huang Pei, Thomas Bogendoerfer, Sasha Levin
From: Huang Pei <huangpei@loongson.cn>
[ Upstream commit 41ce097f714401e6ad8f3f5eb30d7f91b0b5e495 ]
It hangup when booting Loongson 3A1000 with BOTH
CONFIG_PAGE_SIZE_64KB and CONFIG_MIPS_VA_BITS_48, that it turn
out to use 2-level pgtable instead of 3-level. 64KB page size
with 2-level pgtable only cover 42 bits VA, use 3-level pgtable
to cover all 48 bits VA(55 bits)
Fixes: 1e321fa917fb ("MIPS64: Support of at least 48 bits of SEGBITS)
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e513528be3ad7..8a227a80f6bd5 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2991,7 +2991,7 @@ config HAVE_LATENCYTOP_SUPPORT
config PGTABLE_LEVELS
int
default 4 if PAGE_SIZE_4KB && MIPS_VA_BITS_48
- default 3 if 64BIT && !PAGE_SIZE_64KB
+ default 3 if 64BIT && (!PAGE_SIZE_64KB || MIPS_VA_BITS_48)
default 2
config MIPS_AUTO_PFN_OFFSET
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 53/69] net/smc: Dont call clcsock shutdown twice when smc shutdown
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 52/69] MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48 Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 54/69] net: hns3: fix VF RSS failed problem after PF enable multi-TCs Greg Kroah-Hartman
` (22 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tony Lu, Wen Gu, Karsten Graul,
Jakub Kicinski, Sasha Levin
From: Tony Lu <tonylu@linux.alibaba.com>
[ Upstream commit bacb6c1e47691cda4a95056c21b5487fb7199fcc ]
When applications call shutdown() with SHUT_RDWR in userspace,
smc_close_active() calls kernel_sock_shutdown(), and it is called
twice in smc_shutdown().
This fixes this by checking sk_state before do clcsock shutdown, and
avoids missing the application's call of smc_shutdown().
Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/
Fixes: 606a63c9783a ("net/smc: Ensure the active closing peer first closes clcsock")
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20211126024134.45693-1-tonylu@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/smc/af_smc.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 9aab4ab8161bd..4c904ab29e0e6 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -1589,8 +1589,10 @@ static __poll_t smc_poll(struct file *file, struct socket *sock,
static int smc_shutdown(struct socket *sock, int how)
{
struct sock *sk = sock->sk;
+ bool do_shutdown = true;
struct smc_sock *smc;
int rc = -EINVAL;
+ int old_state;
int rc1 = 0;
smc = smc_sk(sk);
@@ -1617,7 +1619,11 @@ static int smc_shutdown(struct socket *sock, int how)
}
switch (how) {
case SHUT_RDWR: /* shutdown in both directions */
+ old_state = sk->sk_state;
rc = smc_close_active(smc);
+ if (old_state == SMC_ACTIVE &&
+ sk->sk_state == SMC_PEERCLOSEWAIT1)
+ do_shutdown = false;
break;
case SHUT_WR:
rc = smc_close_shutdown_write(smc);
@@ -1627,7 +1633,7 @@ static int smc_shutdown(struct socket *sock, int how)
/* nothing more to do because peer is not involved */
break;
}
- if (smc->clcsock)
+ if (do_shutdown && smc->clcsock)
rc1 = kernel_sock_shutdown(smc->clcsock, how);
/* map sock_shutdown_cmd constants to sk_shutdown value range */
sk->sk_shutdown |= how + 1;
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 54/69] net: hns3: fix VF RSS failed problem after PF enable multi-TCs
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 53/69] net/smc: Dont call clcsock shutdown twice when smc shutdown Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 55/69] vhost/vsock: fix incorrect used length reported to the guest Greg Kroah-Hartman
` (21 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Guangbin Huang, Jakub Kicinski, Sasha Levin
From: Guangbin Huang <huangguangbin2@huawei.com>
[ Upstream commit 8d2ad993aa05c0768f00c886c9d369cd97a337ac ]
When PF is set to multi-TCs and configured mapping relationship between
priorities and TCs, the hardware will active these settings for this PF
and its VFs.
In this case when VF just uses one TC and its rx packets contain priority,
and if the priority is not mapped to TC0, as other TCs of VF is not valid,
hardware always put this kind of packets to the queue 0. It cause this kind
of packets of VF can not be used RSS function.
To fix this problem, set tc mode of all unused TCs of VF to the setting of
TC0, then rx packet with priority which map to unused TC will be direct to
TC0.
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index fd5375b5991bb..a257bf635bc24 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -451,9 +451,9 @@ static int hclgevf_set_rss_tc_mode(struct hclgevf_dev *hdev, u16 rss_size)
roundup_size = ilog2(roundup_size);
for (i = 0; i < HCLGEVF_MAX_TC_NUM; i++) {
- tc_valid[i] = !!(hdev->hw_tc_map & BIT(i));
+ tc_valid[i] = 1;
tc_size[i] = roundup_size;
- tc_offset[i] = rss_size * i;
+ tc_offset[i] = (hdev->hw_tc_map & BIT(i)) ? rss_size * i : 0;
}
hclgevf_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_RSS_TC_MODE, false);
--
2.33.0
^ permalink raw reply related [flat|nested] 78+ messages in thread* [PATCH 4.19 55/69] vhost/vsock: fix incorrect used length reported to the guest
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 54/69] net: hns3: fix VF RSS failed problem after PF enable multi-TCs Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 56/69] tracing: Check pid filtering when creating events Greg Kroah-Hartman
` (20 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Halil Pasic, Jason Wang,
Stefano Garzarella, Michael S. Tsirkin, Stefan Hajnoczi
From: Stefano Garzarella <sgarzare@redhat.com>
commit 49d8c5ffad07ca014cfae72a1b9b8c52b6ad9cb8 upstream.
The "used length" reported by calling vhost_add_used() must be the
number of bytes written by the device (using "in" buffers).
In vhost_vsock_handle_tx_kick() the device only reads the guest
buffers (they are all "out" buffers), without writing anything,
so we must pass 0 as "used length" to comply virtio spec.
Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Cc: stable@vger.kernel.org
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211122163525.294024-2-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/vhost/vsock.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -490,7 +490,7 @@ static void vhost_vsock_handle_tx_kick(s
virtio_transport_free_pkt(pkt);
len += sizeof(pkt->hdr);
- vhost_add_used(vq, head, len);
+ vhost_add_used(vq, head, 0);
total_len += len;
added = true;
} while(likely(!vhost_exceeds_weight(vq, ++pkts, total_len)));
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 56/69] tracing: Check pid filtering when creating events
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 55/69] vhost/vsock: fix incorrect used length reported to the guest Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 57/69] s390/mm: validate VMA in PGSTE manipulation functions Greg Kroah-Hartman
` (19 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Steven Rostedt (VMware)
From: Steven Rostedt (VMware) <rostedt@goodmis.org>
commit 6cb206508b621a9a0a2c35b60540e399225c8243 upstream.
When pid filtering is activated in an instance, all of the events trace
files for that instance has the PID_FILTER flag set. This determines
whether or not pid filtering needs to be done on the event, otherwise the
event is executed as normal.
If pid filtering is enabled when an event is created (via a dynamic event
or modules), its flag is not updated to reflect the current state, and the
events are not filtered properly.
Cc: stable@vger.kernel.org
Fixes: 3fdaf80f4a836 ("tracing: Implement event pid filtering")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/trace_events.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -2255,12 +2255,19 @@ static struct trace_event_file *
trace_create_new_event(struct trace_event_call *call,
struct trace_array *tr)
{
+ struct trace_pid_list *pid_list;
struct trace_event_file *file;
file = kmem_cache_alloc(file_cachep, GFP_TRACE);
if (!file)
return NULL;
+ pid_list = rcu_dereference_protected(tr->filtered_pids,
+ lockdep_is_held(&event_mutex));
+
+ if (pid_list)
+ file->flags |= EVENT_FILE_FL_PID_FILTER;
+
file->event_call = call;
file->tr = tr;
atomic_set(&file->sm_ref, 0);
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 57/69] s390/mm: validate VMA in PGSTE manipulation functions
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 56/69] tracing: Check pid filtering when creating events Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 58/69] hugetlbfs: flush TLBs correctly after huge_pmd_unshare Greg Kroah-Hartman
` (18 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Hildenbrand, Claudio Imbrenda,
Heiko Carstens, Christian Borntraeger
From: David Hildenbrand <david@redhat.com>
commit fe3d10024073f06f04c74b9674bd71ccc1d787cf upstream.
We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f2605e ("mm: mmap: zap pages
with read mmap_sem in munmap"). gfn_to_hva() will only translate using
KVM memory regions, but won't validate the VMA.
Further, we should not allocate page tables outside of VMA boundaries: if
evil user space decides to map hugetlbfs to these ranges, bad things will
happen because we suddenly have PTE or PMD page tables where we
shouldn't have them.
Similarly, we have to check if we suddenly find a hugetlbfs VMA, before
calling get_locked_pte().
Fixes: 2d42f9477320 ("s390/kvm: Add PGSTE manipulation functions")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-4-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/mm/pgtable.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -970,6 +970,7 @@ EXPORT_SYMBOL(get_guest_storage_key);
int pgste_perform_essa(struct mm_struct *mm, unsigned long hva, int orc,
unsigned long *oldpte, unsigned long *oldpgste)
{
+ struct vm_area_struct *vma;
unsigned long pgstev;
spinlock_t *ptl;
pgste_t pgste;
@@ -979,6 +980,10 @@ int pgste_perform_essa(struct mm_struct
WARN_ON_ONCE(orc > ESSA_MAX);
if (unlikely(orc > ESSA_MAX))
return -EINVAL;
+
+ vma = find_vma(mm, hva);
+ if (!vma || hva < vma->vm_start || is_vm_hugetlb_page(vma))
+ return -EFAULT;
ptep = get_locked_pte(mm, hva, &ptl);
if (unlikely(!ptep))
return -EFAULT;
@@ -1071,10 +1076,14 @@ EXPORT_SYMBOL(pgste_perform_essa);
int set_pgste_bits(struct mm_struct *mm, unsigned long hva,
unsigned long bits, unsigned long value)
{
+ struct vm_area_struct *vma;
spinlock_t *ptl;
pgste_t new;
pte_t *ptep;
+ vma = find_vma(mm, hva);
+ if (!vma || hva < vma->vm_start || is_vm_hugetlb_page(vma))
+ return -EFAULT;
ptep = get_locked_pte(mm, hva, &ptl);
if (unlikely(!ptep))
return -EFAULT;
@@ -1099,9 +1108,13 @@ EXPORT_SYMBOL(set_pgste_bits);
*/
int get_pgste(struct mm_struct *mm, unsigned long hva, unsigned long *pgstep)
{
+ struct vm_area_struct *vma;
spinlock_t *ptl;
pte_t *ptep;
+ vma = find_vma(mm, hva);
+ if (!vma || hva < vma->vm_start || is_vm_hugetlb_page(vma))
+ return -EFAULT;
ptep = get_locked_pte(mm, hva, &ptl);
if (unlikely(!ptep))
return -EFAULT;
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 58/69] hugetlbfs: flush TLBs correctly after huge_pmd_unshare
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 57/69] s390/mm: validate VMA in PGSTE manipulation functions Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 59/69] NFC: add NCI_UNREG flag to eliminate the race Greg Kroah-Hartman
` (17 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nadav Amit, Mike Kravetz,
Aneesh Kumar K.V, KAMEZAWA Hiroyuki, Andrew Morton,
Linus Torvalds
From: Nadav Amit <namit@vmware.com>
commit a4a118f2eead1d6c49e00765de89878288d4b890 upstream.
When __unmap_hugepage_range() calls to huge_pmd_unshare() succeed, a TLB
flush is missing. This TLB flush must be performed before releasing the
i_mmap_rwsem, in order to prevent an unshared PMDs page from being
released and reused before the TLB flush took place.
Arguably, a comprehensive solution would use mmu_gather interface to
batch the TLB flushes and the PMDs page release, however it is not an
easy solution: (1) try_to_unmap_one() and try_to_migrate_one() also call
huge_pmd_unshare() and they cannot use the mmu_gather interface; and (2)
deferring the release of the page reference for the PMDs page until
after i_mmap_rwsem is dropeed can confuse huge_pmd_unshare() into
thinking PMDs are shared when they are not.
Fix __unmap_hugepage_range() by adding the missing TLB flush, and
forcing a flush when unshare is successful.
Fixes: 24669e58477e ("hugetlb: use mmu_gather instead of a temporary linked list for accumulating pages)" # 3.6
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/include/asm/tlb.h | 8 ++++++++
arch/ia64/include/asm/tlb.h | 10 ++++++++++
arch/s390/include/asm/tlb.h | 16 ++++++++++++++++
arch/sh/include/asm/tlb.h | 10 ++++++++++
arch/um/include/asm/tlb.h | 12 ++++++++++++
include/asm-generic/tlb.h | 2 ++
mm/hugetlb.c | 23 +++++++++++++++++++----
mm/memory.c | 10 ++++++++++
8 files changed, 87 insertions(+), 4 deletions(-)
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -280,6 +280,14 @@ tlb_remove_pmd_tlb_entry(struct mmu_gath
tlb_add_flush(tlb, addr);
}
+static inline void
+tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+ unsigned long size)
+{
+ tlb_add_flush(tlb, address);
+ tlb_add_flush(tlb, address + size - PMD_SIZE);
+}
+
#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr)
#define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp)
--- a/arch/ia64/include/asm/tlb.h
+++ b/arch/ia64/include/asm/tlb.h
@@ -268,6 +268,16 @@ __tlb_remove_tlb_entry (struct mmu_gathe
tlb->end_addr = address + PAGE_SIZE;
}
+static inline void
+tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+ unsigned long size)
+{
+ if (tlb->start_addr > address)
+ tlb->start_addr = address;
+ if (tlb->end_addr < address + size)
+ tlb->end_addr = address + size;
+}
+
#define tlb_migrate_finish(mm) platform_tlb_migrate_finish(mm)
#define tlb_start_vma(tlb, vma) do { } while (0)
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -116,6 +116,20 @@ static inline void tlb_remove_page_size(
return tlb_remove_page(tlb, page);
}
+static inline void tlb_flush_pmd_range(struct mmu_gather *tlb,
+ unsigned long address, unsigned long size)
+{
+ /*
+ * the range might exceed the original range that was provided to
+ * tlb_gather_mmu(), so we need to update it despite the fact it is
+ * usually not updated.
+ */
+ if (tlb->start > address)
+ tlb->start = address;
+ if (tlb->end < address + size)
+ tlb->end = address + size;
+}
+
/*
* pte_free_tlb frees a pte table and clears the CRSTE for the
* page table from the tlb.
@@ -177,6 +191,8 @@ static inline void pud_free_tlb(struct m
#define tlb_remove_tlb_entry(tlb, ptep, addr) do { } while (0)
#define tlb_remove_pmd_tlb_entry(tlb, pmdp, addr) do { } while (0)
#define tlb_migrate_finish(mm) do { } while (0)
+#define tlb_flush_pmd_range(tlb, addr, sz) do { } while (0)
+
#define tlb_remove_huge_tlb_entry(h, tlb, ptep, address) \
tlb_remove_tlb_entry(tlb, ptep, address)
--- a/arch/sh/include/asm/tlb.h
+++ b/arch/sh/include/asm/tlb.h
@@ -127,6 +127,16 @@ static inline void tlb_remove_page_size(
return tlb_remove_page(tlb, page);
}
+static inline void
+tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+ unsigned long size)
+{
+ if (tlb->start > address)
+ tlb->start = address;
+ if (tlb->end < address + size)
+ tlb->end = address + size;
+}
+
#define tlb_remove_check_page_size_change tlb_remove_check_page_size_change
static inline void tlb_remove_check_page_size_change(struct mmu_gather *tlb,
unsigned int page_size)
--- a/arch/um/include/asm/tlb.h
+++ b/arch/um/include/asm/tlb.h
@@ -130,6 +130,18 @@ static inline void tlb_remove_page_size(
return tlb_remove_page(tlb, page);
}
+static inline void
+tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+ unsigned long size)
+{
+ tlb->need_flush = 1;
+
+ if (tlb->start > address)
+ tlb->start = address;
+ if (tlb->end < address + size)
+ tlb->end = address + size;
+}
+
/**
* tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation.
*
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -118,6 +118,8 @@ void arch_tlb_gather_mmu(struct mmu_gath
void tlb_flush_mmu(struct mmu_gather *tlb);
void arch_tlb_finish_mmu(struct mmu_gather *tlb,
unsigned long start, unsigned long end, bool force);
+void tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+ unsigned long size);
extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page,
int page_size);
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3425,6 +3425,7 @@ void __unmap_hugepage_range(struct mmu_g
unsigned long sz = huge_page_size(h);
unsigned long mmun_start = start; /* For mmu_notifiers */
unsigned long mmun_end = end; /* For mmu_notifiers */
+ bool force_flush = false;
WARN_ON(!is_vm_hugetlb_page(vma));
BUG_ON(start & ~huge_page_mask(h));
@@ -3451,10 +3452,8 @@ void __unmap_hugepage_range(struct mmu_g
ptl = huge_pte_lock(h, mm, ptep);
if (huge_pmd_unshare(mm, &address, ptep)) {
spin_unlock(ptl);
- /*
- * We just unmapped a page of PMDs by clearing a PUD.
- * The caller's TLB flush range should cover this area.
- */
+ tlb_flush_pmd_range(tlb, address & PUD_MASK, PUD_SIZE);
+ force_flush = true;
continue;
}
@@ -3511,6 +3510,22 @@ void __unmap_hugepage_range(struct mmu_g
}
mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
tlb_end_vma(tlb, vma);
+
+ /*
+ * If we unshared PMDs, the TLB flush was not recorded in mmu_gather. We
+ * could defer the flush until now, since by holding i_mmap_rwsem we
+ * guaranteed that the last refernece would not be dropped. But we must
+ * do the flushing before we return, as otherwise i_mmap_rwsem will be
+ * dropped and the last reference to the shared PMDs page might be
+ * dropped as well.
+ *
+ * In theory we could defer the freeing of the PMD pages as well, but
+ * huge_pmd_unshare() relies on the exact page_count for the PMD page to
+ * detect sharing, so we cannot defer the release of the page either.
+ * Instead, do flush now.
+ */
+ if (force_flush)
+ tlb_flush_mmu_tlbonly(tlb);
}
void __unmap_hugepage_range_final(struct mmu_gather *tlb,
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -324,6 +324,16 @@ bool __tlb_remove_page_size(struct mmu_g
return false;
}
+void tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+ unsigned long size)
+{
+ if (tlb->page_size != 0 && tlb->page_size != PMD_SIZE)
+ tlb_flush_mmu(tlb);
+
+ tlb->page_size = PMD_SIZE;
+ tlb->start = min(tlb->start, address);
+ tlb->end = max(tlb->end, address + size);
+}
#endif /* HAVE_GENERIC_MMU_GATHER */
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 59/69] NFC: add NCI_UNREG flag to eliminate the race
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 58/69] hugetlbfs: flush TLBs correctly after huge_pmd_unshare Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 60/69] fuse: release pipe buf after last use Greg Kroah-Hartman
` (16 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lin Ma, Jakub Kicinski, Krzysztof Kozlowski
From: Lin Ma <linma@zju.edu.cn>
commit 48b71a9e66c2eab60564b1b1c85f4928ed04e406 upstream.
There are two sites that calls queue_work() after the
destroy_workqueue() and lead to possible UAF.
The first site is nci_send_cmd(), which can happen after the
nci_close_device as below
nfcmrvl_nci_unregister_dev | nfc_genl_dev_up
nci_close_device |
flush_workqueue |
del_timer_sync |
nci_unregister_device | nfc_get_device
destroy_workqueue | nfc_dev_up
nfc_unregister_device | nci_dev_up
device_del | nci_open_device
| __nci_request
| nci_send_cmd
| queue_work !!!
Another site is nci_cmd_timer, awaked by the nci_cmd_work from the
nci_send_cmd.
... | ...
nci_unregister_device | queue_work
destroy_workqueue |
nfc_unregister_device | ...
device_del | nci_cmd_work
| mod_timer
| ...
| nci_cmd_timer
| queue_work !!!
For the above two UAF, the root cause is that the nfc_dev_up can race
between the nci_unregister_device routine. Therefore, this patch
introduce NCI_UNREG flag to easily eliminate the possible race. In
addition, the mutex_lock in nci_close_device can act as a barrier.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116152732.19238-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/nfc/nci_core.h | 1 +
net/nfc/nci/core.c | 19 +++++++++++++++++--
2 files changed, 18 insertions(+), 2 deletions(-)
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -42,6 +42,7 @@ enum nci_flag {
NCI_UP,
NCI_DATA_EXCHANGE,
NCI_DATA_EXCHANGE_TO,
+ NCI_UNREG,
};
/* NCI device states */
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -485,6 +485,11 @@ static int nci_open_device(struct nci_de
mutex_lock(&ndev->req_lock);
+ if (test_bit(NCI_UNREG, &ndev->flags)) {
+ rc = -ENODEV;
+ goto done;
+ }
+
if (test_bit(NCI_UP, &ndev->flags)) {
rc = -EALREADY;
goto done;
@@ -548,6 +553,10 @@ done:
static int nci_close_device(struct nci_dev *ndev)
{
nci_req_cancel(ndev, ENODEV);
+
+ /* This mutex needs to be held as a barrier for
+ * caller nci_unregister_device
+ */
mutex_lock(&ndev->req_lock);
if (!test_and_clear_bit(NCI_UP, &ndev->flags)) {
@@ -585,8 +594,8 @@ static int nci_close_device(struct nci_d
/* Flush cmd wq */
flush_workqueue(ndev->cmd_wq);
- /* Clear flags */
- ndev->flags = 0;
+ /* Clear flags except NCI_UNREG */
+ ndev->flags &= BIT(NCI_UNREG);
mutex_unlock(&ndev->req_lock);
@@ -1268,6 +1277,12 @@ void nci_unregister_device(struct nci_de
{
struct nci_conn_info *conn_info, *n;
+ /* This set_bit is not protected with specialized barrier,
+ * However, it is fine because the mutex_lock(&ndev->req_lock);
+ * in nci_close_device() will help to emit one.
+ */
+ set_bit(NCI_UNREG, &ndev->flags);
+
nci_close_device(ndev);
destroy_workqueue(ndev->cmd_wq);
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 60/69] fuse: release pipe buf after last use
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 59/69] NFC: add NCI_UNREG flag to eliminate the race Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 61/69] xen: sync include/xen/interface/io/ring.h with Xens newest version Greg Kroah-Hartman
` (15 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Justin Forbes, Miklos Szeredi
From: Miklos Szeredi <mszeredi@redhat.com>
commit 473441720c8616dfaf4451f9c7ea14f0eb5e5d65 upstream.
Checking buf->flags should be done before the pipe_buf_release() is called
on the pipe buffer, since releasing the buffer might modify the flags.
This is exactly what page_cache_pipe_buf_release() does, and which results
in the same VM_BUG_ON_PAGE(PageLRU(page)) that the original patch was
trying to fix.
Reported-by: Justin Forbes <jmforbes@linuxtx.org>
Fixes: 712a951025c0 ("fuse: fix page stealing")
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/fuse/dev.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -905,17 +905,17 @@ static int fuse_try_move_page(struct fus
goto out_put_old;
}
+ get_page(newpage);
+
+ if (!(buf->flags & PIPE_BUF_FLAG_LRU))
+ lru_cache_add_file(newpage);
+
/*
* Release while we have extra ref on stolen page. Otherwise
* anon_pipe_buf_release() might think the page can be reused.
*/
pipe_buf_release(cs->pipe, buf);
- get_page(newpage);
-
- if (!(buf->flags & PIPE_BUF_FLAG_LRU))
- lru_cache_add_file(newpage);
-
err = 0;
spin_lock(&cs->req->waitq.lock);
if (test_bit(FR_ABORTED, &cs->req->flags))
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 61/69] xen: sync include/xen/interface/io/ring.h with Xens newest version
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 60/69] fuse: release pipe buf after last use Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 62/69] xen/blkfront: read response from backend only once Greg Kroah-Hartman
` (14 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Juergen Gross
From: Juergen Gross <jgross@suse.com>
commit 629a5d87e26fe96bcaab44cbb81f5866af6f7008 upstream.
Sync include/xen/interface/io/ring.h with Xen's newest version in
order to get the RING_COPY_RESPONSE() and RING_RESPONSE_PROD_OVERFLOW()
macros.
Note that this will correct the wrong license info by adding the
missing original copyright notice.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/xen/interface/io/ring.h | 307 +++++++++++++++++++++-------------------
1 file changed, 165 insertions(+), 142 deletions(-)
--- a/include/xen/interface/io/ring.h
+++ b/include/xen/interface/io/ring.h
@@ -1,21 +1,53 @@
-/* SPDX-License-Identifier: GPL-2.0 */
/******************************************************************************
* ring.h
*
* Shared producer-consumer ring macros.
*
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
* Tim Deegan and Andrew Warfield November 2004.
*/
#ifndef __XEN_PUBLIC_IO_RING_H__
#define __XEN_PUBLIC_IO_RING_H__
+/*
+ * When #include'ing this header, you need to provide the following
+ * declaration upfront:
+ * - standard integers types (uint8_t, uint16_t, etc)
+ * They are provided by stdint.h of the standard headers.
+ *
+ * In addition, if you intend to use the FLEX macros, you also need to
+ * provide the following, before invoking the FLEX macros:
+ * - size_t
+ * - memcpy
+ * - grant_ref_t
+ * These declarations are provided by string.h of the standard headers,
+ * and grant_table.h from the Xen public headers.
+ */
+
#include <xen/interface/grant_table.h>
typedef unsigned int RING_IDX;
/* Round a 32-bit unsigned constant down to the nearest power of two. */
-#define __RD2(_x) (((_x) & 0x00000002) ? 0x2 : ((_x) & 0x1))
+#define __RD2(_x) (((_x) & 0x00000002) ? 0x2 : ((_x) & 0x1))
#define __RD4(_x) (((_x) & 0x0000000c) ? __RD2((_x)>>2)<<2 : __RD2(_x))
#define __RD8(_x) (((_x) & 0x000000f0) ? __RD4((_x)>>4)<<4 : __RD4(_x))
#define __RD16(_x) (((_x) & 0x0000ff00) ? __RD8((_x)>>8)<<8 : __RD8(_x))
@@ -27,82 +59,79 @@ typedef unsigned int RING_IDX;
* A ring contains as many entries as will fit, rounded down to the nearest
* power of two (so we can mask with (size-1) to loop around).
*/
-#define __CONST_RING_SIZE(_s, _sz) \
- (__RD32(((_sz) - offsetof(struct _s##_sring, ring)) / \
- sizeof(((struct _s##_sring *)0)->ring[0])))
-
+#define __CONST_RING_SIZE(_s, _sz) \
+ (__RD32(((_sz) - offsetof(struct _s##_sring, ring)) / \
+ sizeof(((struct _s##_sring *)0)->ring[0])))
/*
* The same for passing in an actual pointer instead of a name tag.
*/
-#define __RING_SIZE(_s, _sz) \
- (__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
+#define __RING_SIZE(_s, _sz) \
+ (__RD32(((_sz) - (long)(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
/*
* Macros to make the correct C datatypes for a new kind of ring.
*
* To make a new ring datatype, you need to have two message structures,
- * let's say struct request, and struct response already defined.
+ * let's say request_t, and response_t already defined.
*
* In a header where you want the ring datatype declared, you then do:
*
- * DEFINE_RING_TYPES(mytag, struct request, struct response);
+ * DEFINE_RING_TYPES(mytag, request_t, response_t);
*
* These expand out to give you a set of types, as you can see below.
* The most important of these are:
*
- * struct mytag_sring - The shared ring.
- * struct mytag_front_ring - The 'front' half of the ring.
- * struct mytag_back_ring - The 'back' half of the ring.
+ * mytag_sring_t - The shared ring.
+ * mytag_front_ring_t - The 'front' half of the ring.
+ * mytag_back_ring_t - The 'back' half of the ring.
*
* To initialize a ring in your code you need to know the location and size
* of the shared memory area (PAGE_SIZE, for instance). To initialise
* the front half:
*
- * struct mytag_front_ring front_ring;
- * SHARED_RING_INIT((struct mytag_sring *)shared_page);
- * FRONT_RING_INIT(&front_ring, (struct mytag_sring *)shared_page,
- * PAGE_SIZE);
+ * mytag_front_ring_t front_ring;
+ * SHARED_RING_INIT((mytag_sring_t *)shared_page);
+ * FRONT_RING_INIT(&front_ring, (mytag_sring_t *)shared_page, PAGE_SIZE);
*
* Initializing the back follows similarly (note that only the front
* initializes the shared ring):
*
- * struct mytag_back_ring back_ring;
- * BACK_RING_INIT(&back_ring, (struct mytag_sring *)shared_page,
- * PAGE_SIZE);
+ * mytag_back_ring_t back_ring;
+ * BACK_RING_INIT(&back_ring, (mytag_sring_t *)shared_page, PAGE_SIZE);
*/
-#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t) \
- \
-/* Shared ring entry */ \
-union __name##_sring_entry { \
- __req_t req; \
- __rsp_t rsp; \
-}; \
- \
-/* Shared ring page */ \
-struct __name##_sring { \
- RING_IDX req_prod, req_event; \
- RING_IDX rsp_prod, rsp_event; \
- uint8_t pad[48]; \
- union __name##_sring_entry ring[1]; /* variable-length */ \
-}; \
- \
-/* "Front" end's private variables */ \
-struct __name##_front_ring { \
- RING_IDX req_prod_pvt; \
- RING_IDX rsp_cons; \
- unsigned int nr_ents; \
- struct __name##_sring *sring; \
-}; \
- \
-/* "Back" end's private variables */ \
-struct __name##_back_ring { \
- RING_IDX rsp_prod_pvt; \
- RING_IDX req_cons; \
- unsigned int nr_ents; \
- struct __name##_sring *sring; \
-};
-
+#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t) \
+ \
+/* Shared ring entry */ \
+union __name##_sring_entry { \
+ __req_t req; \
+ __rsp_t rsp; \
+}; \
+ \
+/* Shared ring page */ \
+struct __name##_sring { \
+ RING_IDX req_prod, req_event; \
+ RING_IDX rsp_prod, rsp_event; \
+ uint8_t __pad[48]; \
+ union __name##_sring_entry ring[1]; /* variable-length */ \
+}; \
+ \
+/* "Front" end's private variables */ \
+struct __name##_front_ring { \
+ RING_IDX req_prod_pvt; \
+ RING_IDX rsp_cons; \
+ unsigned int nr_ents; \
+ struct __name##_sring *sring; \
+}; \
+ \
+/* "Back" end's private variables */ \
+struct __name##_back_ring { \
+ RING_IDX rsp_prod_pvt; \
+ RING_IDX req_cons; \
+ unsigned int nr_ents; \
+ struct __name##_sring *sring; \
+}; \
+ \
/*
* Macros for manipulating rings.
*
@@ -119,105 +148,99 @@ struct __name##_back_ring { \
*/
/* Initialising empty rings */
-#define SHARED_RING_INIT(_s) do { \
- (_s)->req_prod = (_s)->rsp_prod = 0; \
- (_s)->req_event = (_s)->rsp_event = 1; \
- memset((_s)->pad, 0, sizeof((_s)->pad)); \
+#define SHARED_RING_INIT(_s) do { \
+ (_s)->req_prod = (_s)->rsp_prod = 0; \
+ (_s)->req_event = (_s)->rsp_event = 1; \
+ (void)memset((_s)->__pad, 0, sizeof((_s)->__pad)); \
} while(0)
-#define FRONT_RING_INIT(_r, _s, __size) do { \
- (_r)->req_prod_pvt = 0; \
- (_r)->rsp_cons = 0; \
- (_r)->nr_ents = __RING_SIZE(_s, __size); \
- (_r)->sring = (_s); \
+#define FRONT_RING_ATTACH(_r, _s, _i, __size) do { \
+ (_r)->req_prod_pvt = (_i); \
+ (_r)->rsp_cons = (_i); \
+ (_r)->nr_ents = __RING_SIZE(_s, __size); \
+ (_r)->sring = (_s); \
} while (0)
-#define BACK_RING_INIT(_r, _s, __size) do { \
- (_r)->rsp_prod_pvt = 0; \
- (_r)->req_cons = 0; \
- (_r)->nr_ents = __RING_SIZE(_s, __size); \
- (_r)->sring = (_s); \
-} while (0)
+#define FRONT_RING_INIT(_r, _s, __size) FRONT_RING_ATTACH(_r, _s, 0, __size)
-/* Initialize to existing shared indexes -- for recovery */
-#define FRONT_RING_ATTACH(_r, _s, __size) do { \
- (_r)->sring = (_s); \
- (_r)->req_prod_pvt = (_s)->req_prod; \
- (_r)->rsp_cons = (_s)->rsp_prod; \
- (_r)->nr_ents = __RING_SIZE(_s, __size); \
+#define BACK_RING_ATTACH(_r, _s, _i, __size) do { \
+ (_r)->rsp_prod_pvt = (_i); \
+ (_r)->req_cons = (_i); \
+ (_r)->nr_ents = __RING_SIZE(_s, __size); \
+ (_r)->sring = (_s); \
} while (0)
-#define BACK_RING_ATTACH(_r, _s, __size) do { \
- (_r)->sring = (_s); \
- (_r)->rsp_prod_pvt = (_s)->rsp_prod; \
- (_r)->req_cons = (_s)->req_prod; \
- (_r)->nr_ents = __RING_SIZE(_s, __size); \
-} while (0)
+#define BACK_RING_INIT(_r, _s, __size) BACK_RING_ATTACH(_r, _s, 0, __size)
/* How big is this ring? */
-#define RING_SIZE(_r) \
+#define RING_SIZE(_r) \
((_r)->nr_ents)
/* Number of free requests (for use on front side only). */
-#define RING_FREE_REQUESTS(_r) \
+#define RING_FREE_REQUESTS(_r) \
(RING_SIZE(_r) - ((_r)->req_prod_pvt - (_r)->rsp_cons))
/* Test if there is an empty slot available on the front ring.
* (This is only meaningful from the front. )
*/
-#define RING_FULL(_r) \
+#define RING_FULL(_r) \
(RING_FREE_REQUESTS(_r) == 0)
/* Test if there are outstanding messages to be processed on a ring. */
-#define RING_HAS_UNCONSUMED_RESPONSES(_r) \
+#define RING_HAS_UNCONSUMED_RESPONSES(_r) \
((_r)->sring->rsp_prod - (_r)->rsp_cons)
-#define RING_HAS_UNCONSUMED_REQUESTS(_r) \
- ({ \
- unsigned int req = (_r)->sring->req_prod - (_r)->req_cons; \
- unsigned int rsp = RING_SIZE(_r) - \
- ((_r)->req_cons - (_r)->rsp_prod_pvt); \
- req < rsp ? req : rsp; \
- })
+#define RING_HAS_UNCONSUMED_REQUESTS(_r) ({ \
+ unsigned int req = (_r)->sring->req_prod - (_r)->req_cons; \
+ unsigned int rsp = RING_SIZE(_r) - \
+ ((_r)->req_cons - (_r)->rsp_prod_pvt); \
+ req < rsp ? req : rsp; \
+})
/* Direct access to individual ring elements, by index. */
-#define RING_GET_REQUEST(_r, _idx) \
+#define RING_GET_REQUEST(_r, _idx) \
(&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].req))
+#define RING_GET_RESPONSE(_r, _idx) \
+ (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
+
/*
- * Get a local copy of a request.
+ * Get a local copy of a request/response.
*
- * Use this in preference to RING_GET_REQUEST() so all processing is
+ * Use this in preference to RING_GET_{REQUEST,RESPONSE}() so all processing is
* done on a local copy that cannot be modified by the other end.
*
* Note that https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 may cause this
- * to be ineffective where _req is a struct which consists of only bitfields.
+ * to be ineffective where dest is a struct which consists of only bitfields.
*/
-#define RING_COPY_REQUEST(_r, _idx, _req) do { \
- /* Use volatile to force the copy into _req. */ \
- *(_req) = *(volatile typeof(_req))RING_GET_REQUEST(_r, _idx); \
+#define RING_COPY_(type, r, idx, dest) do { \
+ /* Use volatile to force the copy into dest. */ \
+ *(dest) = *(volatile typeof(dest))RING_GET_##type(r, idx); \
} while (0)
-#define RING_GET_RESPONSE(_r, _idx) \
- (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
+#define RING_COPY_REQUEST(r, idx, req) RING_COPY_(REQUEST, r, idx, req)
+#define RING_COPY_RESPONSE(r, idx, rsp) RING_COPY_(RESPONSE, r, idx, rsp)
/* Loop termination condition: Would the specified index overflow the ring? */
-#define RING_REQUEST_CONS_OVERFLOW(_r, _cons) \
+#define RING_REQUEST_CONS_OVERFLOW(_r, _cons) \
(((_cons) - (_r)->rsp_prod_pvt) >= RING_SIZE(_r))
/* Ill-behaved frontend determination: Can there be this many requests? */
-#define RING_REQUEST_PROD_OVERFLOW(_r, _prod) \
+#define RING_REQUEST_PROD_OVERFLOW(_r, _prod) \
(((_prod) - (_r)->rsp_prod_pvt) > RING_SIZE(_r))
-
-#define RING_PUSH_REQUESTS(_r) do { \
- virt_wmb(); /* back sees requests /before/ updated producer index */ \
- (_r)->sring->req_prod = (_r)->req_prod_pvt; \
+/* Ill-behaved backend determination: Can there be this many responses? */
+#define RING_RESPONSE_PROD_OVERFLOW(_r, _prod) \
+ (((_prod) - (_r)->rsp_cons) > RING_SIZE(_r))
+
+#define RING_PUSH_REQUESTS(_r) do { \
+ virt_wmb(); /* back sees requests /before/ updated producer index */\
+ (_r)->sring->req_prod = (_r)->req_prod_pvt; \
} while (0)
-#define RING_PUSH_RESPONSES(_r) do { \
- virt_wmb(); /* front sees responses /before/ updated producer index */ \
- (_r)->sring->rsp_prod = (_r)->rsp_prod_pvt; \
+#define RING_PUSH_RESPONSES(_r) do { \
+ virt_wmb(); /* front sees resps /before/ updated producer index */ \
+ (_r)->sring->rsp_prod = (_r)->rsp_prod_pvt; \
} while (0)
/*
@@ -250,40 +273,40 @@ struct __name##_back_ring { \
* field appropriately.
*/
-#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do { \
- RING_IDX __old = (_r)->sring->req_prod; \
- RING_IDX __new = (_r)->req_prod_pvt; \
- virt_wmb(); /* back sees requests /before/ updated producer index */ \
- (_r)->sring->req_prod = __new; \
- virt_mb(); /* back sees new requests /before/ we check req_event */ \
- (_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) < \
- (RING_IDX)(__new - __old)); \
-} while (0)
-
-#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do { \
- RING_IDX __old = (_r)->sring->rsp_prod; \
- RING_IDX __new = (_r)->rsp_prod_pvt; \
- virt_wmb(); /* front sees responses /before/ updated producer index */ \
- (_r)->sring->rsp_prod = __new; \
- virt_mb(); /* front sees new responses /before/ we check rsp_event */ \
- (_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) < \
- (RING_IDX)(__new - __old)); \
-} while (0)
-
-#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do { \
- (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \
- if (_work_to_do) break; \
- (_r)->sring->req_event = (_r)->req_cons + 1; \
- virt_mb(); \
- (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \
-} while (0)
-
-#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do { \
- (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \
- if (_work_to_do) break; \
- (_r)->sring->rsp_event = (_r)->rsp_cons + 1; \
- virt_mb(); \
- (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \
+#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do { \
+ RING_IDX __old = (_r)->sring->req_prod; \
+ RING_IDX __new = (_r)->req_prod_pvt; \
+ virt_wmb(); /* back sees requests /before/ updated producer index */\
+ (_r)->sring->req_prod = __new; \
+ virt_mb(); /* back sees new requests /before/ we check req_event */ \
+ (_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) < \
+ (RING_IDX)(__new - __old)); \
+} while (0)
+
+#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do { \
+ RING_IDX __old = (_r)->sring->rsp_prod; \
+ RING_IDX __new = (_r)->rsp_prod_pvt; \
+ virt_wmb(); /* front sees resps /before/ updated producer index */ \
+ (_r)->sring->rsp_prod = __new; \
+ virt_mb(); /* front sees new resps /before/ we check rsp_event */ \
+ (_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) < \
+ (RING_IDX)(__new - __old)); \
+} while (0)
+
+#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do { \
+ (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \
+ if (_work_to_do) break; \
+ (_r)->sring->req_event = (_r)->req_cons + 1; \
+ virt_mb(); \
+ (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \
+} while (0)
+
+#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do { \
+ (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \
+ if (_work_to_do) break; \
+ (_r)->sring->rsp_event = (_r)->rsp_cons + 1; \
+ virt_mb(); \
+ (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \
} while (0)
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 62/69] xen/blkfront: read response from backend only once
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 61/69] xen: sync include/xen/interface/io/ring.h with Xens newest version Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 63/69] xen/blkfront: dont take local copy of a request from the ring page Greg Kroah-Hartman
` (13 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich,
Roger Pau Monné
From: Juergen Gross <jgross@suse.com>
commit 71b66243f9898d0e54296b4e7035fb33cdcb0707 upstream.
In order to avoid problems in case the backend is modifying a response
on the ring page while the frontend has already seen it, just read the
response into a local buffer in one go and then operate on that buffer
only.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210730103854.12681-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/xen-blkfront.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1549,7 +1549,7 @@ static bool blkif_completion(unsigned lo
static irqreturn_t blkif_interrupt(int irq, void *dev_id)
{
struct request *req;
- struct blkif_response *bret;
+ struct blkif_response bret;
RING_IDX i, rp;
unsigned long flags;
struct blkfront_ring_info *rinfo = (struct blkfront_ring_info *)dev_id;
@@ -1566,8 +1566,9 @@ static irqreturn_t blkif_interrupt(int i
for (i = rinfo->ring.rsp_cons; i != rp; i++) {
unsigned long id;
- bret = RING_GET_RESPONSE(&rinfo->ring, i);
- id = bret->id;
+ RING_COPY_RESPONSE(&rinfo->ring, i, &bret);
+ id = bret.id;
+
/*
* The backend has messed up and given us an id that we would
* never have given to it (we stamp it up to BLK_RING_SIZE -
@@ -1575,39 +1576,39 @@ static irqreturn_t blkif_interrupt(int i
*/
if (id >= BLK_RING_SIZE(info)) {
WARN(1, "%s: response to %s has incorrect id (%ld)\n",
- info->gd->disk_name, op_name(bret->operation), id);
+ info->gd->disk_name, op_name(bret.operation), id);
/* We can't safely get the 'struct request' as
* the id is busted. */
continue;
}
req = rinfo->shadow[id].request;
- if (bret->operation != BLKIF_OP_DISCARD) {
+ if (bret.operation != BLKIF_OP_DISCARD) {
/*
* We may need to wait for an extra response if the
* I/O request is split in 2
*/
- if (!blkif_completion(&id, rinfo, bret))
+ if (!blkif_completion(&id, rinfo, &bret))
continue;
}
if (add_id_to_freelist(rinfo, id)) {
WARN(1, "%s: response to %s (id %ld) couldn't be recycled!\n",
- info->gd->disk_name, op_name(bret->operation), id);
+ info->gd->disk_name, op_name(bret.operation), id);
continue;
}
- if (bret->status == BLKIF_RSP_OKAY)
+ if (bret.status == BLKIF_RSP_OKAY)
blkif_req(req)->error = BLK_STS_OK;
else
blkif_req(req)->error = BLK_STS_IOERR;
- switch (bret->operation) {
+ switch (bret.operation) {
case BLKIF_OP_DISCARD:
- if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
+ if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
struct request_queue *rq = info->rq;
printk(KERN_WARNING "blkfront: %s: %s op failed\n",
- info->gd->disk_name, op_name(bret->operation));
+ info->gd->disk_name, op_name(bret.operation));
blkif_req(req)->error = BLK_STS_NOTSUPP;
info->feature_discard = 0;
info->feature_secdiscard = 0;
@@ -1617,15 +1618,15 @@ static irqreturn_t blkif_interrupt(int i
break;
case BLKIF_OP_FLUSH_DISKCACHE:
case BLKIF_OP_WRITE_BARRIER:
- if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
+ if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
printk(KERN_WARNING "blkfront: %s: %s op failed\n",
- info->gd->disk_name, op_name(bret->operation));
+ info->gd->disk_name, op_name(bret.operation));
blkif_req(req)->error = BLK_STS_NOTSUPP;
}
- if (unlikely(bret->status == BLKIF_RSP_ERROR &&
+ if (unlikely(bret.status == BLKIF_RSP_ERROR &&
rinfo->shadow[id].req.u.rw.nr_segments == 0)) {
printk(KERN_WARNING "blkfront: %s: empty %s op failed\n",
- info->gd->disk_name, op_name(bret->operation));
+ info->gd->disk_name, op_name(bret.operation));
blkif_req(req)->error = BLK_STS_NOTSUPP;
}
if (unlikely(blkif_req(req)->error)) {
@@ -1638,9 +1639,9 @@ static irqreturn_t blkif_interrupt(int i
/* fall through */
case BLKIF_OP_READ:
case BLKIF_OP_WRITE:
- if (unlikely(bret->status != BLKIF_RSP_OKAY))
+ if (unlikely(bret.status != BLKIF_RSP_OKAY))
dev_dbg(&info->xbdev->dev, "Bad return from blkdev data "
- "request: %x\n", bret->status);
+ "request: %x\n", bret.status);
break;
default:
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 63/69] xen/blkfront: dont take local copy of a request from the ring page
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 62/69] xen/blkfront: read response from backend only once Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 64/69] xen/blkfront: dont trust the backend response data blindly Greg Kroah-Hartman
` (12 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich,
Roger Pau Monné
From: Juergen Gross <jgross@suse.com>
commit 8f5a695d99000fc3aa73934d7ced33cfc64dcdab upstream.
In order to avoid a malicious backend being able to influence the local
copy of a request build the request locally first and then copy it to
the ring page instead of doing it the other way round as today.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210730103854.12681-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/xen-blkfront.c | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -536,7 +536,7 @@ static unsigned long blkif_ring_get_requ
rinfo->shadow[id].status = REQ_WAITING;
rinfo->shadow[id].associated_id = NO_ASSOCIATED_ID;
- (*ring_req)->u.rw.id = id;
+ rinfo->shadow[id].req.u.rw.id = id;
return id;
}
@@ -544,11 +544,12 @@ static unsigned long blkif_ring_get_requ
static int blkif_queue_discard_req(struct request *req, struct blkfront_ring_info *rinfo)
{
struct blkfront_info *info = rinfo->dev_info;
- struct blkif_request *ring_req;
+ struct blkif_request *ring_req, *final_ring_req;
unsigned long id;
/* Fill out a communications ring structure. */
- id = blkif_ring_get_request(rinfo, req, &ring_req);
+ id = blkif_ring_get_request(rinfo, req, &final_ring_req);
+ ring_req = &rinfo->shadow[id].req;
ring_req->operation = BLKIF_OP_DISCARD;
ring_req->u.discard.nr_sectors = blk_rq_sectors(req);
@@ -559,8 +560,8 @@ static int blkif_queue_discard_req(struc
else
ring_req->u.discard.flag = 0;
- /* Keep a private copy so we can reissue requests when recovering. */
- rinfo->shadow[id].req = *ring_req;
+ /* Copy the request to the ring page. */
+ *final_ring_req = *ring_req;
return 0;
}
@@ -693,6 +694,7 @@ static int blkif_queue_rw_req(struct req
{
struct blkfront_info *info = rinfo->dev_info;
struct blkif_request *ring_req, *extra_ring_req = NULL;
+ struct blkif_request *final_ring_req, *final_extra_ring_req = NULL;
unsigned long id, extra_id = NO_ASSOCIATED_ID;
bool require_extra_req = false;
int i;
@@ -737,7 +739,8 @@ static int blkif_queue_rw_req(struct req
}
/* Fill out a communications ring structure. */
- id = blkif_ring_get_request(rinfo, req, &ring_req);
+ id = blkif_ring_get_request(rinfo, req, &final_ring_req);
+ ring_req = &rinfo->shadow[id].req;
num_sg = blk_rq_map_sg(req->q, req, rinfo->shadow[id].sg);
num_grant = 0;
@@ -788,7 +791,9 @@ static int blkif_queue_rw_req(struct req
ring_req->u.rw.nr_segments = num_grant;
if (unlikely(require_extra_req)) {
extra_id = blkif_ring_get_request(rinfo, req,
- &extra_ring_req);
+ &final_extra_ring_req);
+ extra_ring_req = &rinfo->shadow[extra_id].req;
+
/*
* Only the first request contains the scatter-gather
* list.
@@ -830,10 +835,10 @@ static int blkif_queue_rw_req(struct req
if (setup.segments)
kunmap_atomic(setup.segments);
- /* Keep a private copy so we can reissue requests when recovering. */
- rinfo->shadow[id].req = *ring_req;
+ /* Copy request(s) to the ring page. */
+ *final_ring_req = *ring_req;
if (unlikely(require_extra_req))
- rinfo->shadow[extra_id].req = *extra_ring_req;
+ *final_extra_ring_req = *extra_ring_req;
if (new_persistent_gnts)
gnttab_free_grant_references(setup.gref_head);
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 64/69] xen/blkfront: dont trust the backend response data blindly
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 63/69] xen/blkfront: dont take local copy of a request from the ring page Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 65/69] xen/netfront: read response from backend only once Greg Kroah-Hartman
` (11 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich,
Roger Pau Monné
From: Juergen Gross <jgross@suse.com>
commit b94e4b147fd1992ad450e1fea1fdaa3738753373 upstream.
Today blkfront will trust the backend to send only sane response data.
In order to avoid privilege escalations or crashes in case of malicious
backends verify the data to be within expected limits. Especially make
sure that the response always references an outstanding request.
Introduce a new state of the ring BLKIF_STATE_ERROR which will be
switched to in case an inconsistency is being detected. Recovering from
this state is possible only via removing and adding the virtual device
again (e.g. via a suspend/resume cycle).
Make all warning messages issued due to valid error responses rate
limited in order to avoid message floods being triggered by a malicious
backend.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210730103854.12681-4-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/xen-blkfront.c | 70 ++++++++++++++++++++++++++++++++-----------
1 file changed, 53 insertions(+), 17 deletions(-)
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -80,6 +80,7 @@ enum blkif_state {
BLKIF_STATE_DISCONNECTED,
BLKIF_STATE_CONNECTED,
BLKIF_STATE_SUSPENDED,
+ BLKIF_STATE_ERROR,
};
struct grant {
@@ -89,6 +90,7 @@ struct grant {
};
enum blk_req_status {
+ REQ_PROCESSING,
REQ_WAITING,
REQ_DONE,
REQ_ERROR,
@@ -533,7 +535,7 @@ static unsigned long blkif_ring_get_requ
id = get_id_from_freelist(rinfo);
rinfo->shadow[id].request = req;
- rinfo->shadow[id].status = REQ_WAITING;
+ rinfo->shadow[id].status = REQ_PROCESSING;
rinfo->shadow[id].associated_id = NO_ASSOCIATED_ID;
rinfo->shadow[id].req.u.rw.id = id;
@@ -562,6 +564,7 @@ static int blkif_queue_discard_req(struc
/* Copy the request to the ring page. */
*final_ring_req = *ring_req;
+ rinfo->shadow[id].status = REQ_WAITING;
return 0;
}
@@ -837,8 +840,11 @@ static int blkif_queue_rw_req(struct req
/* Copy request(s) to the ring page. */
*final_ring_req = *ring_req;
- if (unlikely(require_extra_req))
+ rinfo->shadow[id].status = REQ_WAITING;
+ if (unlikely(require_extra_req)) {
*final_extra_ring_req = *extra_ring_req;
+ rinfo->shadow[extra_id].status = REQ_WAITING;
+ }
if (new_persistent_gnts)
gnttab_free_grant_references(setup.gref_head);
@@ -1412,8 +1418,8 @@ static enum blk_req_status blkif_rsp_to_
static int blkif_get_final_status(enum blk_req_status s1,
enum blk_req_status s2)
{
- BUG_ON(s1 == REQ_WAITING);
- BUG_ON(s2 == REQ_WAITING);
+ BUG_ON(s1 < REQ_DONE);
+ BUG_ON(s2 < REQ_DONE);
if (s1 == REQ_ERROR || s2 == REQ_ERROR)
return BLKIF_RSP_ERROR;
@@ -1446,7 +1452,7 @@ static bool blkif_completion(unsigned lo
s->status = blkif_rsp_to_req_status(bret->status);
/* Wait the second response if not yet here. */
- if (s2->status == REQ_WAITING)
+ if (s2->status < REQ_DONE)
return false;
bret->status = blkif_get_final_status(s->status,
@@ -1565,11 +1571,17 @@ static irqreturn_t blkif_interrupt(int i
spin_lock_irqsave(&rinfo->ring_lock, flags);
again:
- rp = rinfo->ring.sring->rsp_prod;
- rmb(); /* Ensure we see queued responses up to 'rp'. */
+ rp = READ_ONCE(rinfo->ring.sring->rsp_prod);
+ virt_rmb(); /* Ensure we see queued responses up to 'rp'. */
+ if (RING_RESPONSE_PROD_OVERFLOW(&rinfo->ring, rp)) {
+ pr_alert("%s: illegal number of responses %u\n",
+ info->gd->disk_name, rp - rinfo->ring.rsp_cons);
+ goto err;
+ }
for (i = rinfo->ring.rsp_cons; i != rp; i++) {
unsigned long id;
+ unsigned int op;
RING_COPY_RESPONSE(&rinfo->ring, i, &bret);
id = bret.id;
@@ -1580,14 +1592,28 @@ static irqreturn_t blkif_interrupt(int i
* look in get_id_from_freelist.
*/
if (id >= BLK_RING_SIZE(info)) {
- WARN(1, "%s: response to %s has incorrect id (%ld)\n",
- info->gd->disk_name, op_name(bret.operation), id);
- /* We can't safely get the 'struct request' as
- * the id is busted. */
- continue;
+ pr_alert("%s: response has incorrect id (%ld)\n",
+ info->gd->disk_name, id);
+ goto err;
+ }
+ if (rinfo->shadow[id].status != REQ_WAITING) {
+ pr_alert("%s: response references no pending request\n",
+ info->gd->disk_name);
+ goto err;
}
+
+ rinfo->shadow[id].status = REQ_PROCESSING;
req = rinfo->shadow[id].request;
+ op = rinfo->shadow[id].req.operation;
+ if (op == BLKIF_OP_INDIRECT)
+ op = rinfo->shadow[id].req.u.indirect.indirect_op;
+ if (bret.operation != op) {
+ pr_alert("%s: response has wrong operation (%u instead of %u)\n",
+ info->gd->disk_name, bret.operation, op);
+ goto err;
+ }
+
if (bret.operation != BLKIF_OP_DISCARD) {
/*
* We may need to wait for an extra response if the
@@ -1612,7 +1638,8 @@ static irqreturn_t blkif_interrupt(int i
case BLKIF_OP_DISCARD:
if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
struct request_queue *rq = info->rq;
- printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+
+ pr_warn_ratelimited("blkfront: %s: %s op failed\n",
info->gd->disk_name, op_name(bret.operation));
blkif_req(req)->error = BLK_STS_NOTSUPP;
info->feature_discard = 0;
@@ -1624,13 +1651,13 @@ static irqreturn_t blkif_interrupt(int i
case BLKIF_OP_FLUSH_DISKCACHE:
case BLKIF_OP_WRITE_BARRIER:
if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
- printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+ pr_warn_ratelimited("blkfront: %s: %s op failed\n",
info->gd->disk_name, op_name(bret.operation));
blkif_req(req)->error = BLK_STS_NOTSUPP;
}
if (unlikely(bret.status == BLKIF_RSP_ERROR &&
rinfo->shadow[id].req.u.rw.nr_segments == 0)) {
- printk(KERN_WARNING "blkfront: %s: empty %s op failed\n",
+ pr_warn_ratelimited("blkfront: %s: empty %s op failed\n",
info->gd->disk_name, op_name(bret.operation));
blkif_req(req)->error = BLK_STS_NOTSUPP;
}
@@ -1645,8 +1672,9 @@ static irqreturn_t blkif_interrupt(int i
case BLKIF_OP_READ:
case BLKIF_OP_WRITE:
if (unlikely(bret.status != BLKIF_RSP_OKAY))
- dev_dbg(&info->xbdev->dev, "Bad return from blkdev data "
- "request: %x\n", bret.status);
+ dev_dbg_ratelimited(&info->xbdev->dev,
+ "Bad return from blkdev data request: %#x\n",
+ bret.status);
break;
default:
@@ -1671,6 +1699,14 @@ static irqreturn_t blkif_interrupt(int i
spin_unlock_irqrestore(&rinfo->ring_lock, flags);
return IRQ_HANDLED;
+
+ err:
+ info->connected = BLKIF_STATE_ERROR;
+
+ spin_unlock_irqrestore(&rinfo->ring_lock, flags);
+
+ pr_alert("%s disabled for further use\n", info->gd->disk_name);
+ return IRQ_HANDLED;
}
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 65/69] xen/netfront: read response from backend only once
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 64/69] xen/blkfront: dont trust the backend response data blindly Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 66/69] xen/netfront: dont read data from request on the ring page Greg Kroah-Hartman
` (10 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich, David S. Miller
From: Juergen Gross <jgross@suse.com>
commit 8446066bf8c1f9f7b7412c43fbea0fb87464d75b upstream.
In order to avoid problems in case the backend is modifying a response
on the ring page while the frontend has already seen it, just read the
response into a local buffer in one go and then operate on that buffer
only.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netfront.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -389,13 +389,13 @@ static void xennet_tx_buf_gc(struct netf
rmb(); /* Ensure we see responses up to 'rp'. */
for (cons = queue->tx.rsp_cons; cons != prod; cons++) {
- struct xen_netif_tx_response *txrsp;
+ struct xen_netif_tx_response txrsp;
- txrsp = RING_GET_RESPONSE(&queue->tx, cons);
- if (txrsp->status == XEN_NETIF_RSP_NULL)
+ RING_COPY_RESPONSE(&queue->tx, cons, &txrsp);
+ if (txrsp.status == XEN_NETIF_RSP_NULL)
continue;
- id = txrsp->id;
+ id = txrsp.id;
skb = queue->tx_skbs[id].skb;
if (unlikely(gnttab_query_foreign_access(
queue->grant_tx_ref[id]) != 0)) {
@@ -744,7 +744,7 @@ static int xennet_get_extras(struct netf
RING_IDX rp)
{
- struct xen_netif_extra_info *extra;
+ struct xen_netif_extra_info extra;
struct device *dev = &queue->info->netdev->dev;
RING_IDX cons = queue->rx.rsp_cons;
int err = 0;
@@ -760,24 +760,22 @@ static int xennet_get_extras(struct netf
break;
}
- extra = (struct xen_netif_extra_info *)
- RING_GET_RESPONSE(&queue->rx, ++cons);
+ RING_COPY_RESPONSE(&queue->rx, ++cons, &extra);
- if (unlikely(!extra->type ||
- extra->type >= XEN_NETIF_EXTRA_TYPE_MAX)) {
+ if (unlikely(!extra.type ||
+ extra.type >= XEN_NETIF_EXTRA_TYPE_MAX)) {
if (net_ratelimit())
dev_warn(dev, "Invalid extra type: %d\n",
- extra->type);
+ extra.type);
err = -EINVAL;
} else {
- memcpy(&extras[extra->type - 1], extra,
- sizeof(*extra));
+ extras[extra.type - 1] = extra;
}
skb = xennet_get_rx_skb(queue, cons);
ref = xennet_get_rx_ref(queue, cons);
xennet_move_rx_slot(queue, skb, ref);
- } while (extra->flags & XEN_NETIF_EXTRA_FLAG_MORE);
+ } while (extra.flags & XEN_NETIF_EXTRA_FLAG_MORE);
queue->rx.rsp_cons = cons;
return err;
@@ -787,7 +785,7 @@ static int xennet_get_responses(struct n
struct netfront_rx_info *rinfo, RING_IDX rp,
struct sk_buff_head *list)
{
- struct xen_netif_rx_response *rx = &rinfo->rx;
+ struct xen_netif_rx_response *rx = &rinfo->rx, rx_local;
struct xen_netif_extra_info *extras = rinfo->extras;
struct device *dev = &queue->info->netdev->dev;
RING_IDX cons = queue->rx.rsp_cons;
@@ -845,7 +843,8 @@ next:
break;
}
- rx = RING_GET_RESPONSE(&queue->rx, cons + slots);
+ RING_COPY_RESPONSE(&queue->rx, cons + slots, &rx_local);
+ rx = &rx_local;
skb = xennet_get_rx_skb(queue, cons + slots);
ref = xennet_get_rx_ref(queue, cons + slots);
slots++;
@@ -900,10 +899,11 @@ static int xennet_fill_frags(struct netf
struct sk_buff *nskb;
while ((nskb = __skb_dequeue(list))) {
- struct xen_netif_rx_response *rx =
- RING_GET_RESPONSE(&queue->rx, ++cons);
+ struct xen_netif_rx_response rx;
skb_frag_t *nfrag = &skb_shinfo(nskb)->frags[0];
+ RING_COPY_RESPONSE(&queue->rx, ++cons, &rx);
+
if (skb_shinfo(skb)->nr_frags == MAX_SKB_FRAGS) {
unsigned int pull_to = NETFRONT_SKB_CB(skb)->pull_to;
@@ -918,7 +918,7 @@ static int xennet_fill_frags(struct netf
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
skb_frag_page(nfrag),
- rx->offset, rx->status, PAGE_SIZE);
+ rx.offset, rx.status, PAGE_SIZE);
skb_shinfo(nskb)->nr_frags = 0;
kfree_skb(nskb);
@@ -1016,7 +1016,7 @@ static int xennet_poll(struct napi_struc
i = queue->rx.rsp_cons;
work_done = 0;
while ((i != rp) && (work_done < budget)) {
- memcpy(rx, RING_GET_RESPONSE(&queue->rx, i), sizeof(*rx));
+ RING_COPY_RESPONSE(&queue->rx, i, rx);
memset(extras, 0, sizeof(rinfo.extras));
err = xennet_get_responses(queue, &rinfo, rp, &tmpq);
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 66/69] xen/netfront: dont read data from request on the ring page
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 65/69] xen/netfront: read response from backend only once Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 67/69] xen/netfront: disentangle tx_skb_freelist Greg Kroah-Hartman
` (9 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich, David S. Miller
From: Juergen Gross <jgross@suse.com>
commit 162081ec33c2686afa29d91bf8d302824aa846c7 upstream.
In order to avoid a malicious backend being able to influence the local
processing of a request build the request locally first and then copy
it to the ring page. Any reading from the request influencing the
processing in the frontend needs to be done on the local instance.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netfront.c | 80 ++++++++++++++++++++-------------------------
1 file changed, 37 insertions(+), 43 deletions(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -425,7 +425,8 @@ struct xennet_gnttab_make_txreq {
struct netfront_queue *queue;
struct sk_buff *skb;
struct page *page;
- struct xen_netif_tx_request *tx; /* Last request */
+ struct xen_netif_tx_request *tx; /* Last request on ring page */
+ struct xen_netif_tx_request tx_local; /* Last request local copy*/
unsigned int size;
};
@@ -453,30 +454,27 @@ static void xennet_tx_setup_grant(unsign
queue->grant_tx_page[id] = page;
queue->grant_tx_ref[id] = ref;
- tx->id = id;
- tx->gref = ref;
- tx->offset = offset;
- tx->size = len;
- tx->flags = 0;
+ info->tx_local.id = id;
+ info->tx_local.gref = ref;
+ info->tx_local.offset = offset;
+ info->tx_local.size = len;
+ info->tx_local.flags = 0;
+
+ *tx = info->tx_local;
info->tx = tx;
- info->size += tx->size;
+ info->size += info->tx_local.size;
}
static struct xen_netif_tx_request *xennet_make_first_txreq(
- struct netfront_queue *queue, struct sk_buff *skb,
- struct page *page, unsigned int offset, unsigned int len)
+ struct xennet_gnttab_make_txreq *info,
+ unsigned int offset, unsigned int len)
{
- struct xennet_gnttab_make_txreq info = {
- .queue = queue,
- .skb = skb,
- .page = page,
- .size = 0,
- };
+ info->size = 0;
- gnttab_for_one_grant(page, offset, len, xennet_tx_setup_grant, &info);
+ gnttab_for_one_grant(info->page, offset, len, xennet_tx_setup_grant, info);
- return info.tx;
+ return info->tx;
}
static void xennet_make_one_txreq(unsigned long gfn, unsigned int offset,
@@ -489,35 +487,27 @@ static void xennet_make_one_txreq(unsign
xennet_tx_setup_grant(gfn, offset, len, data);
}
-static struct xen_netif_tx_request *xennet_make_txreqs(
- struct netfront_queue *queue, struct xen_netif_tx_request *tx,
- struct sk_buff *skb, struct page *page,
+static void xennet_make_txreqs(
+ struct xennet_gnttab_make_txreq *info,
+ struct page *page,
unsigned int offset, unsigned int len)
{
- struct xennet_gnttab_make_txreq info = {
- .queue = queue,
- .skb = skb,
- .tx = tx,
- };
-
/* Skip unused frames from start of page */
page += offset >> PAGE_SHIFT;
offset &= ~PAGE_MASK;
while (len) {
- info.page = page;
- info.size = 0;
+ info->page = page;
+ info->size = 0;
gnttab_foreach_grant_in_range(page, offset, len,
xennet_make_one_txreq,
- &info);
+ info);
page++;
offset = 0;
- len -= info.size;
+ len -= info->size;
}
-
- return info.tx;
}
/*
@@ -571,7 +561,7 @@ static netdev_tx_t xennet_start_xmit(str
{
struct netfront_info *np = netdev_priv(dev);
struct netfront_stats *tx_stats = this_cpu_ptr(np->tx_stats);
- struct xen_netif_tx_request *tx, *first_tx;
+ struct xen_netif_tx_request *first_tx;
unsigned int i;
int notify;
int slots;
@@ -580,6 +570,7 @@ static netdev_tx_t xennet_start_xmit(str
unsigned int len;
unsigned long flags;
struct netfront_queue *queue = NULL;
+ struct xennet_gnttab_make_txreq info = { };
unsigned int num_queues = dev->real_num_tx_queues;
u16 queue_index;
struct sk_buff *nskb;
@@ -637,21 +628,24 @@ static netdev_tx_t xennet_start_xmit(str
}
/* First request for the linear area. */
- first_tx = tx = xennet_make_first_txreq(queue, skb,
- page, offset, len);
- offset += tx->size;
+ info.queue = queue;
+ info.skb = skb;
+ info.page = page;
+ first_tx = xennet_make_first_txreq(&info, offset, len);
+ offset += info.tx_local.size;
if (offset == PAGE_SIZE) {
page++;
offset = 0;
}
- len -= tx->size;
+ len -= info.tx_local.size;
if (skb->ip_summed == CHECKSUM_PARTIAL)
/* local packet? */
- tx->flags |= XEN_NETTXF_csum_blank | XEN_NETTXF_data_validated;
+ first_tx->flags |= XEN_NETTXF_csum_blank |
+ XEN_NETTXF_data_validated;
else if (skb->ip_summed == CHECKSUM_UNNECESSARY)
/* remote but checksummed. */
- tx->flags |= XEN_NETTXF_data_validated;
+ first_tx->flags |= XEN_NETTXF_data_validated;
/* Optional extra info after the first request. */
if (skb_shinfo(skb)->gso_size) {
@@ -660,7 +654,7 @@ static netdev_tx_t xennet_start_xmit(str
gso = (struct xen_netif_extra_info *)
RING_GET_REQUEST(&queue->tx, queue->tx.req_prod_pvt++);
- tx->flags |= XEN_NETTXF_extra_info;
+ first_tx->flags |= XEN_NETTXF_extra_info;
gso->u.gso.size = skb_shinfo(skb)->gso_size;
gso->u.gso.type = (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) ?
@@ -674,13 +668,13 @@ static netdev_tx_t xennet_start_xmit(str
}
/* Requests for the rest of the linear area. */
- tx = xennet_make_txreqs(queue, tx, skb, page, offset, len);
+ xennet_make_txreqs(&info, page, offset, len);
/* Requests for all the frags. */
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- tx = xennet_make_txreqs(queue, tx, skb,
- skb_frag_page(frag), frag->page_offset,
+ xennet_make_txreqs(&info, skb_frag_page(frag),
+ frag->page_offset,
skb_frag_size(frag));
}
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 67/69] xen/netfront: disentangle tx_skb_freelist
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 66/69] xen/netfront: dont read data from request on the ring page Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 68/69] xen/netfront: dont trust the backend response data blindly Greg Kroah-Hartman
` (8 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Juergen Gross, David S. Miller
From: Juergen Gross <jgross@suse.com>
commit 21631d2d741a64a073e167c27769e73bc7844a2f upstream.
The tx_skb_freelist elements are in a single linked list with the
request id used as link reference. The per element link field is in a
union with the skb pointer of an in use request.
Move the link reference out of the union in order to enable a later
reuse of it for requests which need a populated skb pointer.
Rename add_id_to_freelist() and get_id_from_freelist() to
add_id_to_list() and get_id_from_list() in order to prepare using
those for other lists as well. Define ~0 as value to indicate the end
of a list and place that value into the link for a request not being
on the list.
When freeing a skb zero the skb pointer in the request. Use a NULL
value of the skb pointer instead of skb_entry_is_link() for deciding
whether a request has a skb linked to it.
Remove skb_entry_set_link() and open code it instead as it is really
trivial now.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netfront.c | 61 ++++++++++++++++++---------------------------
1 file changed, 25 insertions(+), 36 deletions(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -121,17 +121,11 @@ struct netfront_queue {
/*
* {tx,rx}_skbs store outstanding skbuffs. Free tx_skb entries
- * are linked from tx_skb_freelist through skb_entry.link.
- *
- * NB. Freelist index entries are always going to be less than
- * PAGE_OFFSET, whereas pointers to skbs will always be equal or
- * greater than PAGE_OFFSET: we use this property to distinguish
- * them.
+ * are linked from tx_skb_freelist through tx_link.
*/
- union skb_entry {
- struct sk_buff *skb;
- unsigned long link;
- } tx_skbs[NET_TX_RING_SIZE];
+ struct sk_buff *tx_skbs[NET_TX_RING_SIZE];
+ unsigned short tx_link[NET_TX_RING_SIZE];
+#define TX_LINK_NONE 0xffff
grant_ref_t gref_tx_head;
grant_ref_t grant_tx_ref[NET_TX_RING_SIZE];
struct page *grant_tx_page[NET_TX_RING_SIZE];
@@ -169,33 +163,25 @@ struct netfront_rx_info {
struct xen_netif_extra_info extras[XEN_NETIF_EXTRA_TYPE_MAX - 1];
};
-static void skb_entry_set_link(union skb_entry *list, unsigned short id)
-{
- list->link = id;
-}
-
-static int skb_entry_is_link(const union skb_entry *list)
-{
- BUILD_BUG_ON(sizeof(list->skb) != sizeof(list->link));
- return (unsigned long)list->skb < PAGE_OFFSET;
-}
-
/*
* Access macros for acquiring freeing slots in tx_skbs[].
*/
-static void add_id_to_freelist(unsigned *head, union skb_entry *list,
- unsigned short id)
+static void add_id_to_list(unsigned *head, unsigned short *list,
+ unsigned short id)
{
- skb_entry_set_link(&list[id], *head);
+ list[id] = *head;
*head = id;
}
-static unsigned short get_id_from_freelist(unsigned *head,
- union skb_entry *list)
+static unsigned short get_id_from_list(unsigned *head, unsigned short *list)
{
unsigned int id = *head;
- *head = list[id].link;
+
+ if (id != TX_LINK_NONE) {
+ *head = list[id];
+ list[id] = TX_LINK_NONE;
+ }
return id;
}
@@ -396,7 +382,8 @@ static void xennet_tx_buf_gc(struct netf
continue;
id = txrsp.id;
- skb = queue->tx_skbs[id].skb;
+ skb = queue->tx_skbs[id];
+ queue->tx_skbs[id] = NULL;
if (unlikely(gnttab_query_foreign_access(
queue->grant_tx_ref[id]) != 0)) {
pr_alert("%s: warning -- grant still in use by backend domain\n",
@@ -409,7 +396,7 @@ static void xennet_tx_buf_gc(struct netf
&queue->gref_tx_head, queue->grant_tx_ref[id]);
queue->grant_tx_ref[id] = GRANT_INVALID_REF;
queue->grant_tx_page[id] = NULL;
- add_id_to_freelist(&queue->tx_skb_freelist, queue->tx_skbs, id);
+ add_id_to_list(&queue->tx_skb_freelist, queue->tx_link, id);
dev_kfree_skb_irq(skb);
}
@@ -442,7 +429,7 @@ static void xennet_tx_setup_grant(unsign
struct netfront_queue *queue = info->queue;
struct sk_buff *skb = info->skb;
- id = get_id_from_freelist(&queue->tx_skb_freelist, queue->tx_skbs);
+ id = get_id_from_list(&queue->tx_skb_freelist, queue->tx_link);
tx = RING_GET_REQUEST(&queue->tx, queue->tx.req_prod_pvt++);
ref = gnttab_claim_grant_reference(&queue->gref_tx_head);
WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)(int)ref));
@@ -450,7 +437,7 @@ static void xennet_tx_setup_grant(unsign
gnttab_grant_foreign_access_ref(ref, queue->info->xbdev->otherend_id,
gfn, GNTMAP_readonly);
- queue->tx_skbs[id].skb = skb;
+ queue->tx_skbs[id] = skb;
queue->grant_tx_page[id] = page;
queue->grant_tx_ref[id] = ref;
@@ -1132,17 +1119,18 @@ static void xennet_release_tx_bufs(struc
for (i = 0; i < NET_TX_RING_SIZE; i++) {
/* Skip over entries which are actually freelist references */
- if (skb_entry_is_link(&queue->tx_skbs[i]))
+ if (!queue->tx_skbs[i])
continue;
- skb = queue->tx_skbs[i].skb;
+ skb = queue->tx_skbs[i];
+ queue->tx_skbs[i] = NULL;
get_page(queue->grant_tx_page[i]);
gnttab_end_foreign_access(queue->grant_tx_ref[i],
GNTMAP_readonly,
(unsigned long)page_address(queue->grant_tx_page[i]));
queue->grant_tx_page[i] = NULL;
queue->grant_tx_ref[i] = GRANT_INVALID_REF;
- add_id_to_freelist(&queue->tx_skb_freelist, queue->tx_skbs, i);
+ add_id_to_list(&queue->tx_skb_freelist, queue->tx_link, i);
dev_kfree_skb_irq(skb);
}
}
@@ -1624,13 +1612,14 @@ static int xennet_init_queue(struct netf
snprintf(queue->name, sizeof(queue->name), "vif%s-q%u",
devid, queue->id);
- /* Initialise tx_skbs as a free chain containing every entry. */
+ /* Initialise tx_skb_freelist as a free chain containing every entry. */
queue->tx_skb_freelist = 0;
for (i = 0; i < NET_TX_RING_SIZE; i++) {
- skb_entry_set_link(&queue->tx_skbs[i], i+1);
+ queue->tx_link[i] = i + 1;
queue->grant_tx_ref[i] = GRANT_INVALID_REF;
queue->grant_tx_page[i] = NULL;
}
+ queue->tx_link[NET_TX_RING_SIZE - 1] = TX_LINK_NONE;
/* Clear out rx_skbs */
for (i = 0; i < NET_RX_RING_SIZE; i++) {
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 68/69] xen/netfront: dont trust the backend response data blindly
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 67/69] xen/netfront: disentangle tx_skb_freelist Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 69/69] tty: hvc: replace BUG_ON() with negative return value Greg Kroah-Hartman
` (7 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich, David S. Miller
From: Juergen Gross <jgross@suse.com>
commit a884daa61a7d91650987e855464526aef219590f upstream.
Today netfront will trust the backend to send only sane response data.
In order to avoid privilege escalations or crashes in case of malicious
backends verify the data to be within expected limits. Especially make
sure that the response always references an outstanding request.
Note that only the tx queue needs special id handling, as for the rx
queue the id is equal to the index in the ring page.
Introduce a new indicator for the device whether it is broken and let
the device stop working when it is set. Set this indicator in case the
backend sets any weird data.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netfront.c | 80 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 75 insertions(+), 5 deletions(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -126,10 +126,12 @@ struct netfront_queue {
struct sk_buff *tx_skbs[NET_TX_RING_SIZE];
unsigned short tx_link[NET_TX_RING_SIZE];
#define TX_LINK_NONE 0xffff
+#define TX_PENDING 0xfffe
grant_ref_t gref_tx_head;
grant_ref_t grant_tx_ref[NET_TX_RING_SIZE];
struct page *grant_tx_page[NET_TX_RING_SIZE];
unsigned tx_skb_freelist;
+ unsigned int tx_pend_queue;
spinlock_t rx_lock ____cacheline_aligned_in_smp;
struct xen_netif_rx_front_ring rx;
@@ -155,6 +157,9 @@ struct netfront_info {
struct netfront_stats __percpu *rx_stats;
struct netfront_stats __percpu *tx_stats;
+ /* Is device behaving sane? */
+ bool broken;
+
atomic_t rx_gso_checksum_fixup;
};
@@ -339,7 +344,7 @@ static int xennet_open(struct net_device
unsigned int i = 0;
struct netfront_queue *queue = NULL;
- if (!np->queues)
+ if (!np->queues || np->broken)
return -ENODEV;
for (i = 0; i < num_queues; ++i) {
@@ -367,11 +372,17 @@ static void xennet_tx_buf_gc(struct netf
unsigned short id;
struct sk_buff *skb;
bool more_to_do;
+ const struct device *dev = &queue->info->netdev->dev;
BUG_ON(!netif_carrier_ok(queue->info->netdev));
do {
prod = queue->tx.sring->rsp_prod;
+ if (RING_RESPONSE_PROD_OVERFLOW(&queue->tx, prod)) {
+ dev_alert(dev, "Illegal number of responses %u\n",
+ prod - queue->tx.rsp_cons);
+ goto err;
+ }
rmb(); /* Ensure we see responses up to 'rp'. */
for (cons = queue->tx.rsp_cons; cons != prod; cons++) {
@@ -381,14 +392,27 @@ static void xennet_tx_buf_gc(struct netf
if (txrsp.status == XEN_NETIF_RSP_NULL)
continue;
- id = txrsp.id;
+ id = txrsp.id;
+ if (id >= RING_SIZE(&queue->tx)) {
+ dev_alert(dev,
+ "Response has incorrect id (%u)\n",
+ id);
+ goto err;
+ }
+ if (queue->tx_link[id] != TX_PENDING) {
+ dev_alert(dev,
+ "Response for inactive request\n");
+ goto err;
+ }
+
+ queue->tx_link[id] = TX_LINK_NONE;
skb = queue->tx_skbs[id];
queue->tx_skbs[id] = NULL;
if (unlikely(gnttab_query_foreign_access(
queue->grant_tx_ref[id]) != 0)) {
- pr_alert("%s: warning -- grant still in use by backend domain\n",
- __func__);
- BUG();
+ dev_alert(dev,
+ "Grant still in use by backend domain\n");
+ goto err;
}
gnttab_end_foreign_access_ref(
queue->grant_tx_ref[id], GNTMAP_readonly);
@@ -406,6 +430,12 @@ static void xennet_tx_buf_gc(struct netf
} while (more_to_do);
xennet_maybe_wake_tx(queue);
+
+ return;
+
+ err:
+ queue->info->broken = true;
+ dev_alert(dev, "Disabled for further use\n");
}
struct xennet_gnttab_make_txreq {
@@ -449,6 +479,12 @@ static void xennet_tx_setup_grant(unsign
*tx = info->tx_local;
+ /*
+ * Put the request in the pending queue, it will be set to be pending
+ * when the producer index is about to be raised.
+ */
+ add_id_to_list(&queue->tx_pend_queue, queue->tx_link, id);
+
info->tx = tx;
info->size += info->tx_local.size;
}
@@ -542,6 +578,15 @@ static u16 xennet_select_queue(struct ne
return queue_idx;
}
+static void xennet_mark_tx_pending(struct netfront_queue *queue)
+{
+ unsigned int i;
+
+ while ((i = get_id_from_list(&queue->tx_pend_queue, queue->tx_link)) !=
+ TX_LINK_NONE)
+ queue->tx_link[i] = TX_PENDING;
+}
+
#define MAX_XEN_SKB_FRAGS (65536 / XEN_PAGE_SIZE + 1)
static netdev_tx_t xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -565,6 +610,8 @@ static netdev_tx_t xennet_start_xmit(str
/* Drop the packet if no queues are set up */
if (num_queues < 1)
goto drop;
+ if (unlikely(np->broken))
+ goto drop;
/* Determine which queue to transmit this SKB on */
queue_index = skb_get_queue_mapping(skb);
queue = &np->queues[queue_index];
@@ -668,6 +715,8 @@ static netdev_tx_t xennet_start_xmit(str
/* First request has the packet length. */
first_tx->size = skb->len;
+ xennet_mark_tx_pending(queue);
+
RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&queue->tx, notify);
if (notify)
notify_remote_via_irq(queue->tx_irq);
@@ -992,6 +1041,13 @@ static int xennet_poll(struct napi_struc
skb_queue_head_init(&tmpq);
rp = queue->rx.sring->rsp_prod;
+ if (RING_RESPONSE_PROD_OVERFLOW(&queue->rx, rp)) {
+ dev_alert(&dev->dev, "Illegal number of responses %u\n",
+ rp - queue->rx.rsp_cons);
+ queue->info->broken = true;
+ spin_unlock(&queue->rx_lock);
+ return 0;
+ }
rmb(); /* Ensure we see queued responses up to 'rp'. */
i = queue->rx.rsp_cons;
@@ -1210,6 +1266,9 @@ static irqreturn_t xennet_tx_interrupt(i
struct netfront_queue *queue = dev_id;
unsigned long flags;
+ if (queue->info->broken)
+ return IRQ_HANDLED;
+
spin_lock_irqsave(&queue->tx_lock, flags);
xennet_tx_buf_gc(queue);
spin_unlock_irqrestore(&queue->tx_lock, flags);
@@ -1222,6 +1281,9 @@ static irqreturn_t xennet_rx_interrupt(i
struct netfront_queue *queue = dev_id;
struct net_device *dev = queue->info->netdev;
+ if (queue->info->broken)
+ return IRQ_HANDLED;
+
if (likely(netif_carrier_ok(dev) &&
RING_HAS_UNCONSUMED_RESPONSES(&queue->rx)))
napi_schedule(&queue->napi);
@@ -1243,6 +1305,10 @@ static void xennet_poll_controller(struc
struct netfront_info *info = netdev_priv(dev);
unsigned int num_queues = dev->real_num_tx_queues;
unsigned int i;
+
+ if (info->broken)
+ return;
+
for (i = 0; i < num_queues; ++i)
xennet_interrupt(0, &info->queues[i]);
}
@@ -1614,6 +1680,7 @@ static int xennet_init_queue(struct netf
/* Initialise tx_skb_freelist as a free chain containing every entry. */
queue->tx_skb_freelist = 0;
+ queue->tx_pend_queue = TX_LINK_NONE;
for (i = 0; i < NET_TX_RING_SIZE; i++) {
queue->tx_link[i] = i + 1;
queue->grant_tx_ref[i] = GRANT_INVALID_REF;
@@ -1824,6 +1891,9 @@ static int talk_to_netback(struct xenbus
if (info->queues)
xennet_destroy_queues(info);
+ /* For the case of a reconnect reset the "broken" indicator. */
+ info->broken = false;
+
err = xennet_create_queues(info, &num_queues);
if (err < 0) {
xenbus_dev_fatal(dev, err, "creating queues");
^ permalink raw reply [flat|nested] 78+ messages in thread* [PATCH 4.19 69/69] tty: hvc: replace BUG_ON() with negative return value
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 68/69] xen/netfront: dont trust the backend response data blindly Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-30 1:04 ` [PATCH 4.19 00/69] 4.19.219-rc1 review Shuah Khan
` (6 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jan Beulich, Juergen Gross
From: Juergen Gross <jgross@suse.com>
commit e679004dec37566f658a255157d3aed9d762a2b7 upstream.
Xen frontends shouldn't BUG() in case of illegal data received from
their backends. So replace the BUG_ON()s when reading illegal data from
the ring page with negative return values.
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210707091045.460-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/hvc/hvc_xen.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -86,7 +86,11 @@ static int __write_console(struct xencon
cons = intf->out_cons;
prod = intf->out_prod;
mb(); /* update queue values before going on */
- BUG_ON((prod - cons) > sizeof(intf->out));
+
+ if ((prod - cons) > sizeof(intf->out)) {
+ pr_err_once("xencons: Illegal ring page indices");
+ return -EINVAL;
+ }
while ((sent < len) && ((prod - cons) < sizeof(intf->out)))
intf->out[MASK_XENCONS_IDX(prod++, intf->out)] = data[sent++];
@@ -114,7 +118,10 @@ static int domU_write_console(uint32_t v
*/
while (len) {
int sent = __write_console(cons, data, len);
-
+
+ if (sent < 0)
+ return sent;
+
data += sent;
len -= sent;
@@ -138,7 +145,11 @@ static int domU_read_console(uint32_t vt
cons = intf->in_cons;
prod = intf->in_prod;
mb(); /* get pointers before reading ring */
- BUG_ON((prod - cons) > sizeof(intf->in));
+
+ if ((prod - cons) > sizeof(intf->in)) {
+ pr_err_once("xencons: Illegal ring page indices");
+ return -EINVAL;
+ }
while (cons != prod && recv < len)
buf[recv++] = intf->in[MASK_XENCONS_IDX(cons++, intf->in)];
^ permalink raw reply [flat|nested] 78+ messages in thread* Re: [PATCH 4.19 00/69] 4.19.219-rc1 review
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 4.19 69/69] tty: hvc: replace BUG_ON() with negative return value Greg Kroah-Hartman
@ 2021-11-30 1:04 ` Shuah Khan
2021-11-30 1:24 ` Samuel Zou
` (5 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Shuah Khan @ 2021-11-30 1:04 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable, Shuah Khan
On 11/29/21 11:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.219 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.219-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 78+ messages in thread* Re: [PATCH 4.19 00/69] 4.19.219-rc1 review
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2021-11-30 1:04 ` [PATCH 4.19 00/69] 4.19.219-rc1 review Shuah Khan
@ 2021-11-30 1:24 ` Samuel Zou
2021-11-30 8:42 ` Jon Hunter
` (4 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Samuel Zou @ 2021-11-30 1:24 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable
On 2021/11/30 2:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.219 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.219-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 4.19.219-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.219-rc1
Commit: 64a98a60fb8990a42d2afcd274b7419ca74e42bf
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8943
passed: 8943
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8943
passed: 8943
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <hulkrobot@huawei.com>
^ permalink raw reply [flat|nested] 78+ messages in thread* Re: [PATCH 4.19 00/69] 4.19.219-rc1 review
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2021-11-30 1:24 ` Samuel Zou
@ 2021-11-30 8:42 ` Jon Hunter
2021-11-30 9:32 ` Naresh Kamboju
` (3 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Jon Hunter @ 2021-11-30 8:42 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, stable, linux-tegra
On Mon, 29 Nov 2021 19:17:42 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.219 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.219-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v4.19:
10 builds: 10 pass, 0 fail
22 boots: 22 pass, 0 fail
40 tests: 40 pass, 0 fail
Linux version: 4.19.219-rc1-g969701714472
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Jon
^ permalink raw reply [flat|nested] 78+ messages in thread* Re: [PATCH 4.19 00/69] 4.19.219-rc1 review
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2021-11-30 8:42 ` Jon Hunter
@ 2021-11-30 9:32 ` Naresh Kamboju
2021-11-30 13:38 ` Sudip Mukherjee
` (2 subsequent siblings)
75 siblings, 0 replies; 78+ messages in thread
From: Naresh Kamboju @ 2021-11-30 9:32 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, shuah, f.fainelli, patches, lkft-triage, jonathanh,
stable, pavel, akpm, torvalds, linux
On Mon, 29 Nov 2021 at 23:51, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.219 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.219-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
## Build
* kernel: 4.19.219-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.19.y
* git commit: 9697017144726ee73f348d6bb4c549151f92320a
* git describe: v4.19.218-70-g969701714472
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.218-70-g969701714472
## No regressions (compared to v4.19.217-321-g078e3b8561f3)
## No fixes (compared to v4.19.217-321-g078e3b8561f3)
## Test result summary
total: 66999, pass: 54132, fail: 570, skip: 10820, xfail: 1477
## Build Summary
* arm: 130 total, 130 passed, 0 failed
* arm64: 35 total, 35 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 26 total, 26 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 22 total, 22 passed, 0 failed
## Test suites summary
* fwts
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 78+ messages in thread* Re: [PATCH 4.19 00/69] 4.19.219-rc1 review
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2021-11-30 9:32 ` Naresh Kamboju
@ 2021-11-30 13:38 ` Sudip Mukherjee
2021-11-30 16:02 ` Pavel Machek
2021-11-30 17:42 ` Guenter Roeck
75 siblings, 0 replies; 78+ messages in thread
From: Sudip Mukherjee @ 2021-11-30 13:38 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, stable
Hi Greg,
On Mon, Nov 29, 2021 at 07:17:42PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.219 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.2.1 20211112): 63 configs -> no failure
arm (gcc version 11.2.1 20211112): 116 configs -> no new failure
arm64 (gcc version 11.2.1 20211112): 2 configs -> no failure
x86_64 (gcc version 11.2.1 20211112): 4 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
[1]. https://openqa.qa.codethink.co.uk/tests/452
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
--
Regards
Sudip
^ permalink raw reply [flat|nested] 78+ messages in thread* Re: [PATCH 4.19 00/69] 4.19.219-rc1 review
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2021-11-30 13:38 ` Sudip Mukherjee
@ 2021-11-30 16:02 ` Pavel Machek
2021-11-30 17:42 ` Guenter Roeck
75 siblings, 0 replies; 78+ messages in thread
From: Pavel Machek @ 2021-11-30 16:02 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, stable
[-- Attachment #1: Type: text/plain, Size: 661 bytes --]
Hi!
> This is the start of the stable review cycle for the 4.19.219 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 78+ messages in thread* Re: [PATCH 4.19 00/69] 4.19.219-rc1 review
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2021-11-30 16:02 ` Pavel Machek
@ 2021-11-30 17:42 ` Guenter Roeck
75 siblings, 0 replies; 78+ messages in thread
From: Guenter Roeck @ 2021-11-30 17:42 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable
On Mon, Nov 29, 2021 at 07:17:42PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.219 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 155 pass: 155 fail: 0
Qemu test results:
total: 441 pass: 441 fail: 0
Tested-by: Guenter Roeck <linux@roeck-us.net>
Guenter
^ permalink raw reply [flat|nested] 78+ messages in thread