* [PATCH 5.10 001/121] bpf: Fix toctou on read-only maps constant scalar tracking
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 002/121] ACPI: Get acpi_devices parent from the parent field Greg Kroah-Hartman
` (128 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, w1tcher.bupt, Daniel Borkmann,
Andrii Nakryiko, Alexei Starovoitov, Masami Ichikawa(CIP)
From: Daniel Borkmann <daniel@iogearbox.net>
commit 353050be4c19e102178ccc05988101887c25ae53 upstream.
Commit a23740ec43ba ("bpf: Track contents of read-only maps as scalars") is
checking whether maps are read-only both from BPF program side and user space
side, and then, given their content is constant, reading out their data via
map->ops->map_direct_value_addr() which is then subsequently used as known
scalar value for the register, that is, it is marked as __mark_reg_known()
with the read value at verification time. Before a23740ec43ba, the register
content was marked as an unknown scalar so the verifier could not make any
assumptions about the map content.
The current implementation however is prone to a TOCTOU race, meaning, the
value read as known scalar for the register is not guaranteed to be exactly
the same at a later point when the program is executed, and as such, the
prior made assumptions of the verifier with regards to the program will be
invalid which can cause issues such as OOB access, etc.
While the BPF_F_RDONLY_PROG map flag is always fixed and required to be
specified at map creation time, the map->frozen property is initially set to
false for the map given the map value needs to be populated, e.g. for global
data sections. Once complete, the loader "freezes" the map from user space
such that no subsequent updates/deletes are possible anymore. For the rest
of the lifetime of the map, this freeze one-time trigger cannot be undone
anymore after a successful BPF_MAP_FREEZE cmd return. Meaning, any new BPF_*
cmd calls which would update/delete map entries will be rejected with -EPERM
since map_get_sys_perms() removes the FMODE_CAN_WRITE permission. This also
means that pending update/delete map entries must still complete before this
guarantee is given. This corner case is not an issue for loaders since they
create and prepare such program private map in successive steps.
However, a malicious user is able to trigger this TOCTOU race in two different
ways: i) via userfaultfd, and ii) via batched updates. For i) userfaultfd is
used to expand the competition interval, so that map_update_elem() can modify
the contents of the map after map_freeze() and bpf_prog_load() were executed.
This works, because userfaultfd halts the parallel thread which triggered a
map_update_elem() at the time where we copy key/value from the user buffer and
this already passed the FMODE_CAN_WRITE capability test given at that time the
map was not "frozen". Then, the main thread performs the map_freeze() and
bpf_prog_load(), and once that had completed successfully, the other thread
is woken up to complete the pending map_update_elem() which then changes the
map content. For ii) the idea of the batched update is similar, meaning, when
there are a large number of updates to be processed, it can increase the
competition interval between the two. It is therefore possible in practice to
modify the contents of the map after executing map_freeze() and bpf_prog_load().
One way to fix both i) and ii) at the same time is to expand the use of the
map's map->writecnt. The latter was introduced in fc9702273e2e ("bpf: Add mmap()
support for BPF_MAP_TYPE_ARRAY") and further refined in 1f6cb19be2e2 ("bpf:
Prevent re-mmap()'ing BPF map as writable for initially r/o mapping") with
the rationale to make a writable mmap()'ing of a map mutually exclusive with
read-only freezing. The counter indicates writable mmap() mappings and then
prevents/fails the freeze operation. Its semantics can be expanded beyond
just mmap() by generally indicating ongoing write phases. This would essentially
span any parallel regular and batched flavor of update/delete operation and
then also have map_freeze() fail with -EBUSY. For the check_mem_access() in
the verifier we expand upon the bpf_map_is_rdonly() check ensuring that all
last pending writes have completed via bpf_map_write_active() test. Once the
map->frozen is set and bpf_map_write_active() indicates a map->writecnt of 0
only then we are really guaranteed to use the map's data as known constants.
For map->frozen being set and pending writes in process of still being completed
we fall back to marking that register as unknown scalar so we don't end up
making assumptions about it. With this, both TOCTOU reproducers from i) and
ii) are fixed.
Note that the map->writecnt has been converted into a atomic64 in the fix in
order to avoid a double freeze_mutex mutex_{un,}lock() pair when updating
map->writecnt in the various map update/delete BPF_* cmd flavors. Spanning
the freeze_mutex over entire map update/delete operations in syscall side
would not be possible due to then causing everything to be serialized.
Similarly, something like synchronize_rcu() after setting map->frozen to wait
for update/deletes to complete is not possible either since it would also
have to span the user copy which can sleep. On the libbpf side, this won't
break d66562fba1ce ("libbpf: Add BPF object skeleton support") as the
anonymous mmap()-ed "map initialization image" is remapped as a BPF map-backed
mmap()-ed memory where for .rodata it's non-writable.
Fixes: a23740ec43ba ("bpf: Track contents of read-only maps as scalars")
Reported-by: w1tcher.bupt@gmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[fix conflict to call bpf_map_write_active_dec() in err_put block.
fix conflict to insert new functions after find_and_alloc_map().]
Reference: CVE-2021-4001
Signed-off-by: Masami Ichikawa(CIP) <masami.ichikawa@cybertrust.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/bpf.h | 3 +-
kernel/bpf/syscall.c | 57 +++++++++++++++++++++++++++++++-------------------
kernel/bpf/verifier.c | 17 ++++++++++++++
3 files changed, 54 insertions(+), 23 deletions(-)
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -173,7 +173,7 @@ struct bpf_map {
atomic64_t usercnt;
struct work_struct work;
struct mutex freeze_mutex;
- u64 writecnt; /* writable mmap cnt; protected by freeze_mutex */
+ atomic64_t writecnt;
};
static inline bool map_value_has_spin_lock(const struct bpf_map *map)
@@ -1252,6 +1252,7 @@ void bpf_map_charge_move(struct bpf_map_
void *bpf_map_area_alloc(u64 size, int numa_node);
void *bpf_map_area_mmapable_alloc(u64 size, int numa_node);
void bpf_map_area_free(void *base);
+bool bpf_map_write_active(const struct bpf_map *map);
void bpf_map_init_from_attr(struct bpf_map *map, union bpf_attr *attr);
int generic_map_lookup_batch(struct bpf_map *map,
const union bpf_attr *attr,
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -127,6 +127,21 @@ static struct bpf_map *find_and_alloc_ma
return map;
}
+static void bpf_map_write_active_inc(struct bpf_map *map)
+{
+ atomic64_inc(&map->writecnt);
+}
+
+static void bpf_map_write_active_dec(struct bpf_map *map)
+{
+ atomic64_dec(&map->writecnt);
+}
+
+bool bpf_map_write_active(const struct bpf_map *map)
+{
+ return atomic64_read(&map->writecnt) != 0;
+}
+
static u32 bpf_map_value_size(struct bpf_map *map)
{
if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
@@ -588,11 +603,8 @@ static void bpf_map_mmap_open(struct vm_
{
struct bpf_map *map = vma->vm_file->private_data;
- if (vma->vm_flags & VM_MAYWRITE) {
- mutex_lock(&map->freeze_mutex);
- map->writecnt++;
- mutex_unlock(&map->freeze_mutex);
- }
+ if (vma->vm_flags & VM_MAYWRITE)
+ bpf_map_write_active_inc(map);
}
/* called for all unmapped memory region (including initial) */
@@ -600,11 +612,8 @@ static void bpf_map_mmap_close(struct vm
{
struct bpf_map *map = vma->vm_file->private_data;
- if (vma->vm_flags & VM_MAYWRITE) {
- mutex_lock(&map->freeze_mutex);
- map->writecnt--;
- mutex_unlock(&map->freeze_mutex);
- }
+ if (vma->vm_flags & VM_MAYWRITE)
+ bpf_map_write_active_dec(map);
}
static const struct vm_operations_struct bpf_map_default_vmops = {
@@ -654,7 +663,7 @@ static int bpf_map_mmap(struct file *fil
goto out;
if (vma->vm_flags & VM_MAYWRITE)
- map->writecnt++;
+ bpf_map_write_active_inc(map);
out:
mutex_unlock(&map->freeze_mutex);
return err;
@@ -1086,6 +1095,7 @@ static int map_update_elem(union bpf_att
map = __bpf_map_get(f);
if (IS_ERR(map))
return PTR_ERR(map);
+ bpf_map_write_active_inc(map);
if (!(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
err = -EPERM;
goto err_put;
@@ -1127,6 +1137,7 @@ free_value:
free_key:
kfree(key);
err_put:
+ bpf_map_write_active_dec(map);
fdput(f);
return err;
}
@@ -1149,6 +1160,7 @@ static int map_delete_elem(union bpf_att
map = __bpf_map_get(f);
if (IS_ERR(map))
return PTR_ERR(map);
+ bpf_map_write_active_inc(map);
if (!(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
err = -EPERM;
goto err_put;
@@ -1179,6 +1191,7 @@ static int map_delete_elem(union bpf_att
out:
kfree(key);
err_put:
+ bpf_map_write_active_dec(map);
fdput(f);
return err;
}
@@ -1483,6 +1496,7 @@ static int map_lookup_and_delete_elem(un
map = __bpf_map_get(f);
if (IS_ERR(map))
return PTR_ERR(map);
+ bpf_map_write_active_inc(map);
if (!(map_get_sys_perms(map, f) & FMODE_CAN_READ) ||
!(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
err = -EPERM;
@@ -1524,6 +1538,7 @@ free_value:
free_key:
kfree(key);
err_put:
+ bpf_map_write_active_dec(map);
fdput(f);
return err;
}
@@ -1550,8 +1565,7 @@ static int map_freeze(const union bpf_at
}
mutex_lock(&map->freeze_mutex);
-
- if (map->writecnt) {
+ if (bpf_map_write_active(map)) {
err = -EBUSY;
goto err_put;
}
@@ -3976,6 +3990,9 @@ static int bpf_map_do_batch(const union
union bpf_attr __user *uattr,
int cmd)
{
+ bool has_read = cmd == BPF_MAP_LOOKUP_BATCH ||
+ cmd == BPF_MAP_LOOKUP_AND_DELETE_BATCH;
+ bool has_write = cmd != BPF_MAP_LOOKUP_BATCH;
struct bpf_map *map;
int err, ufd;
struct fd f;
@@ -3988,16 +4005,13 @@ static int bpf_map_do_batch(const union
map = __bpf_map_get(f);
if (IS_ERR(map))
return PTR_ERR(map);
-
- if ((cmd == BPF_MAP_LOOKUP_BATCH ||
- cmd == BPF_MAP_LOOKUP_AND_DELETE_BATCH) &&
- !(map_get_sys_perms(map, f) & FMODE_CAN_READ)) {
+ if (has_write)
+ bpf_map_write_active_inc(map);
+ if (has_read && !(map_get_sys_perms(map, f) & FMODE_CAN_READ)) {
err = -EPERM;
goto err_put;
}
-
- if (cmd != BPF_MAP_LOOKUP_BATCH &&
- !(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
+ if (has_write && !(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
err = -EPERM;
goto err_put;
}
@@ -4010,8 +4024,9 @@ static int bpf_map_do_batch(const union
BPF_DO_BATCH(map->ops->map_update_batch);
else
BPF_DO_BATCH(map->ops->map_delete_batch);
-
err_put:
+ if (has_write)
+ bpf_map_write_active_dec(map);
fdput(f);
return err;
}
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -3486,7 +3486,22 @@ static void coerce_reg_to_size(struct bp
static bool bpf_map_is_rdonly(const struct bpf_map *map)
{
- return (map->map_flags & BPF_F_RDONLY_PROG) && map->frozen;
+ /* A map is considered read-only if the following condition are true:
+ *
+ * 1) BPF program side cannot change any of the map content. The
+ * BPF_F_RDONLY_PROG flag is throughout the lifetime of a map
+ * and was set at map creation time.
+ * 2) The map value(s) have been initialized from user space by a
+ * loader and then "frozen", such that no new map update/delete
+ * operations from syscall side are possible for the rest of
+ * the map's lifetime from that point onwards.
+ * 3) Any parallel/pending map update/delete operations from syscall
+ * side have been completed. Only after that point, it's safe to
+ * assume that map value(s) are immutable.
+ */
+ return (map->map_flags & BPF_F_RDONLY_PROG) &&
+ READ_ONCE(map->frozen) &&
+ !bpf_map_write_active(map);
}
static int bpf_map_direct_read(struct bpf_map *map, int off, int size, u64 *val)
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 002/121] ACPI: Get acpi_devices parent from the parent field
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 001/121] bpf: Fix toctou on read-only maps constant scalar tracking Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 003/121] USB: serial: option: add Telit LE910S1 0x9200 composition Greg Kroah-Hartman
` (127 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sakari Ailus, Andy Shevchenko,
Rafael J. Wysocki
From: Sakari Ailus <sakari.ailus@linux.intel.com>
commit 9054fc6d57e80c27c0b0632966416144f2092c2b upstream.
Printk modifier %pfw is used to print the full path of the device name.
This is obtained device by device until a device no longer has a parent.
On ACPI getting the parent fwnode is done by calling acpi_get_parent()
which tries to down() a semaphore. But local IRQs are now disabled in
vprintk_store() before the mutex is acquired. This is obviously a problem.
Luckily struct device, embedded in struct acpi_device, has a parent field
already. Use that field to get the parent instead of relying on
acpi_get_parent().
Fixes: 3bd32d6a2ee6 ("lib/vsprintf: Add %pfw conversion specifier for printing fwnode names")
Cc: 5.5+ <stable@vger.kernel.org> # 5.5+
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/acpi/property.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
--- a/drivers/acpi/property.c
+++ b/drivers/acpi/property.c
@@ -1110,15 +1110,10 @@ struct fwnode_handle *acpi_node_get_pare
/* All data nodes have parent pointer so just return that */
return to_acpi_data_node(fwnode)->parent;
} else if (is_acpi_device_node(fwnode)) {
- acpi_handle handle, parent_handle;
+ struct device *dev = to_acpi_device_node(fwnode)->dev.parent;
- handle = to_acpi_device_node(fwnode)->handle;
- if (ACPI_SUCCESS(acpi_get_parent(handle, &parent_handle))) {
- struct acpi_device *adev;
-
- if (!acpi_bus_get_device(parent_handle, &adev))
- return acpi_fwnode_handle(adev);
- }
+ if (dev)
+ return acpi_fwnode_handle(to_acpi_device(dev));
}
return NULL;
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 003/121] USB: serial: option: add Telit LE910S1 0x9200 composition
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 001/121] bpf: Fix toctou on read-only maps constant scalar tracking Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 002/121] ACPI: Get acpi_devices parent from the parent field Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 004/121] USB: serial: option: add Fibocom FM101-GL variants Greg Kroah-Hartman
` (126 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniele Palmas, Johan Hovold
From: Daniele Palmas <dnlplm@gmail.com>
commit e353f3e88720300c3d72f49a4bea54f42db1fa5e upstream.
Add the following Telit LE910S1 composition:
0x9200: tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20211119140319.10448-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1267,6 +1267,8 @@ static const struct usb_device_id option
.driver_info = NCTRL(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
.driver_info = NCTRL(0) | ZLP },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x9200), /* Telit LE910S1 flashing device */
+ .driver_info = NCTRL(0) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) },
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 004/121] USB: serial: option: add Fibocom FM101-GL variants
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 003/121] USB: serial: option: add Telit LE910S1 0x9200 composition Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 005/121] usb: dwc2: gadget: Fix ISOC flow for elapsed frames Greg Kroah-Hartman
` (125 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mingjie Zhang, Johan Hovold
From: Mingjie Zhang <superzmj@fibocom.com>
commit 88459e3e42760abb2299bbf6cb1026491170e02a upstream.
Update the USB serial option driver support for the Fibocom
FM101-GL Cat.6
LTE modules as there are actually several different variants.
- VID:PID 2cb7:01a2, FM101-GL are laptop M.2 cards (with
MBIM interfaces for /Linux/Chrome OS)
- VID:PID 2cb7:01a4, FM101-GL for laptop debug M.2 cards(with adb
interface for /Linux/Chrome OS)
0x01a2: mbim, tty, tty, diag, gnss
0x01a4: mbim, diag, tty, adb, gnss, gnss
Here are the outputs of lsusb -v and usb-devices:
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 86 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2cb7 ProdID=01a2 Rev= 5.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom FM101-GL Module
S: SerialNumber=673326ce
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
Bus 002 Device 084: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x2cb7
idProduct 0x01a2
bcdDevice 5.04
iManufacturer 1 Fibocom Wireless Inc.
iProduct 2 Fibocom FM101-GL Module
iSerial 3 673326ce
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x015d
bNumInterfaces 6
bConfigurationValue 1
iConfiguration 4 MBIM_DUN_DUN_DIAG_NMEA
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 896mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 14
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 14
bInterfaceProtocol 0
iInterface 5 Fibocom FM101-GL LTE Modem
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC MBIM:
bcdMBIMVersion 1.00
wMaxControlMessage 4096
bNumberFilters 32
bMaxFilterSize 128
wMaxSegmentSize 2048
bmNetworkCapabilities 0x20
8-byte ntb input size
CDC MBIM Extended:
bcdMBIMExtendedVersion 1.00
bMaxOutstandingCommandMessages 64
wMTU 1500
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 9
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 6 MBIM Data
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8e EP 14 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 6
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0f EP 15 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 48
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 85 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2cb7 ProdID=01a4 Rev= 5.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom FM101-GL Module
S: SerialNumber=673326ce
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
Bus 002 Device 085: ID 2cb7:01a4 Fibocom Wireless Inc. Fibocom FM101-GL Module
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x2cb7
idProduct 0x01a4
bcdDevice 5.04
iManufacturer 1 Fibocom Wireless Inc.
iProduct 2 Fibocom FM101-GL Module
iSerial 3 673326ce
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0180
bNumInterfaces 7
bConfigurationValue 1
iConfiguration 4 MBIM_DIAG_DUN_ADB_GNSS_GNSS
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 896mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 14
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 14
bInterfaceProtocol 0
iInterface 5 Fibocom FM101-GL LTE Modem
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC MBIM:
bcdMBIMVersion 1.00
wMaxControlMessage 4096
bNumberFilters 32
bMaxFilterSize 128
wMaxSegmentSize 2048
bmNetworkCapabilities 0x20
8-byte ntb input size
CDC MBIM Extended:
bcdMBIMExtendedVersion 1.00
bMaxOutstandingCommandMessages 64
wMTU 1500
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 9
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 6 MBIM Data
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8e EP 14 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 6
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0f EP 15 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 48
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 66
bInterfaceProtocol 1
iInterface 8 ADB Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 6
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Signed-off-by: Mingjie Zhang <superzmj@fibocom.com>
Link: https://lore.kernel.org/r/20211123133757.37475-1-superzmj@fibocom.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2096,6 +2096,9 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */
{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */
+ .driver_info = RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 005/121] usb: dwc2: gadget: Fix ISOC flow for elapsed frames
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 004/121] USB: serial: option: add Fibocom FM101-GL variants Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 006/121] usb: dwc2: hcd_queue: Fix use of floating point literal Greg Kroah-Hartman
` (124 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, John Keeping, Minas Harutyunyan
From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
commit 7ad4a0b1d46b2612f4429a72afd8f137d7efa9a9 upstream.
Added updating of request frame number for elapsed frames,
otherwise frame number will remain as previous use of request.
This will allow function driver to correctly track frames in
case of Missed ISOC occurs.
Added setting request actual length to 0 for elapsed frames.
In Slave mode when pushing data to RxFIFO by dwords, request
actual length incrementing accordingly. But before whole packet
will be pushed into RxFIFO and send to host can occurs Missed
ISOC and data will not send to host. So, in this case request
actual length should be reset to 0.
Fixes: 91bb163e1e4f ("usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/c356baade6e9716d312d43df08d53ae557cb8037.1636011277.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc2/gadget.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -1198,6 +1198,8 @@ static void dwc2_hsotg_start_req(struct
}
ctrl |= DXEPCTL_CNAK;
} else {
+ hs_req->req.frame_number = hs_ep->target_frame;
+ hs_req->req.actual = 0;
dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA);
return;
}
@@ -2856,9 +2858,12 @@ static void dwc2_gadget_handle_ep_disabl
do {
hs_req = get_ep_head(hs_ep);
- if (hs_req)
+ if (hs_req) {
+ hs_req->req.frame_number = hs_ep->target_frame;
+ hs_req->req.actual = 0;
dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req,
-ENODATA);
+ }
dwc2_gadget_incr_frame_num(hs_ep);
/* Update current frame number value. */
hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg);
@@ -2911,8 +2916,11 @@ static void dwc2_gadget_handle_out_token
while (dwc2_gadget_target_frame_elapsed(ep)) {
hs_req = get_ep_head(ep);
- if (hs_req)
+ if (hs_req) {
+ hs_req->req.frame_number = ep->target_frame;
+ hs_req->req.actual = 0;
dwc2_hsotg_complete_request(hsotg, ep, hs_req, -ENODATA);
+ }
dwc2_gadget_incr_frame_num(ep);
/* Update current frame number value. */
@@ -3001,8 +3009,11 @@ static void dwc2_gadget_handle_nak(struc
while (dwc2_gadget_target_frame_elapsed(hs_ep)) {
hs_req = get_ep_head(hs_ep);
- if (hs_req)
+ if (hs_req) {
+ hs_req->req.frame_number = hs_ep->target_frame;
+ hs_req->req.actual = 0;
dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA);
+ }
dwc2_gadget_incr_frame_num(hs_ep);
/* Update current frame number value. */
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 006/121] usb: dwc2: hcd_queue: Fix use of floating point literal
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 005/121] usb: dwc2: gadget: Fix ISOC flow for elapsed frames Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 007/121] usb: dwc3: gadget: Ignore NoStream after End Transfer Greg Kroah-Hartman
` (123 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nick Desaulniers, John Keeping,
Minas Harutyunyan, Nathan Chancellor
From: Nathan Chancellor <nathan@kernel.org>
commit 310780e825f3ffd211b479b8f828885a6faedd63 upstream.
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).
drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
^
drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
^
1 error generated.
This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.
There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.
Link: https://github.com/ClangBuiltLinux/linux/issues/1497
Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83
Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc2/hcd_queue.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -59,7 +59,7 @@
#define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
/* If we get a NAK, wait this long before retrying */
-#define DWC2_RETRY_WAIT_DELAY 1*1E6L
+#define DWC2_RETRY_WAIT_DELAY (1 * NSEC_PER_MSEC)
/**
* dwc2_periodic_channel_available() - Checks that a channel is available for a
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 007/121] usb: dwc3: gadget: Ignore NoStream after End Transfer
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 006/121] usb: dwc2: hcd_queue: Fix use of floating point literal Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 008/121] usb: dwc3: gadget: Check for L1/L2/U3 for Start Transfer Greg Kroah-Hartman
` (122 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Thinh Nguyen
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
commit d74dc3e9f58c28689cef1faccf918e06587367d3 upstream.
The End Transfer command from a stream endpoint will generate a NoStream
event, and we should ignore it. Currently we set the flag
DWC3_EP_IGNORE_NEXT_NOSTREAM to track this prior to sending the command,
and it will be cleared on the next stream event. However, a stream event
may be generated before the End Transfer command completion and
prematurely clear the flag. Fix this by setting the flag on End Transfer
completion instead.
Fixes: 140ca4cfea8a ("usb: dwc3: gadget: Handle stream transfers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/cee1253af4c3600edb878d11c9c08b040817ae23.1635203975.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/gadget.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3007,6 +3007,14 @@ static void dwc3_gadget_endpoint_command
if (cmd != DWC3_DEPCMD_ENDTRANSFER)
return;
+ /*
+ * The END_TRANSFER command will cause the controller to generate a
+ * NoStream Event, and it's not due to the host DP NoStream rejection.
+ * Ignore the next NoStream event.
+ */
+ if (dep->stream_capable)
+ dep->flags |= DWC3_EP_IGNORE_NEXT_NOSTREAM;
+
dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
dwc3_gadget_ep_cleanup_cancelled_requests(dep);
@@ -3229,14 +3237,6 @@ static void dwc3_stop_active_transfer(st
WARN_ON_ONCE(ret);
dep->resource_index = 0;
- /*
- * The END_TRANSFER command will cause the controller to generate a
- * NoStream Event, and it's not due to the host DP NoStream rejection.
- * Ignore the next NoStream event.
- */
- if (dep->stream_capable)
- dep->flags |= DWC3_EP_IGNORE_NEXT_NOSTREAM;
-
if (!interrupt)
dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
else
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 008/121] usb: dwc3: gadget: Check for L1/L2/U3 for Start Transfer
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 007/121] usb: dwc3: gadget: Ignore NoStream after End Transfer Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 009/121] usb: dwc3: gadget: Fix null pointer exception Greg Kroah-Hartman
` (121 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Thinh Nguyen
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
commit 63c4c320ccf77074ffe9019ac596603133c1b517 upstream.
The programming guide noted that the driver needs to verify if the link
state is in U0 before executing the Start Transfer command. If it's not
in U0, the driver needs to perform remote wakeup. This is not accurate.
If the link state is in U1/U2, then the controller will not respond to
link recovery request from DCTL.ULSTCHNGREQ. The Start Transfer command
will trigger a link recovery if it is in U1/U2. A clarification will be
added to the programming guide for all controller versions.
The current implementation shouldn't cause any functional issue. It may
occasionally report an invalid time out warning from failed link
recovery request. The driver will still go ahead with the Start Transfer
command if the remote wakeup fails. The new change only initiates remote
wakeup where it is needed, which is when the link state is in L1/L2/U3.
Fixes: c36d8e947a56 ("usb: dwc3: gadget: put link to U0 before Start Transfer")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/05b4a5fbfbd0863fc9b1d7af934a366219e3d0b4.1635204761.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/gadget.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -310,13 +310,24 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_
if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) {
int link_state;
+ /*
+ * Initiate remote wakeup if the link state is in U3 when
+ * operating in SS/SSP or L1/L2 when operating in HS/FS. If the
+ * link state is in U1/U2, no remote wakeup is needed. The Start
+ * Transfer command will initiate the link recovery.
+ */
link_state = dwc3_gadget_get_link_state(dwc);
- if (link_state == DWC3_LINK_STATE_U1 ||
- link_state == DWC3_LINK_STATE_U2 ||
- link_state == DWC3_LINK_STATE_U3) {
+ switch (link_state) {
+ case DWC3_LINK_STATE_U2:
+ if (dwc->gadget->speed >= USB_SPEED_SUPER)
+ break;
+
+ fallthrough;
+ case DWC3_LINK_STATE_U3:
ret = __dwc3_gadget_wakeup(dwc);
dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n",
ret);
+ break;
}
}
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 009/121] usb: dwc3: gadget: Fix null pointer exception
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 008/121] usb: dwc3: gadget: Check for L1/L2/U3 for Start Transfer Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 010/121] net: nexthop: fix null pointer dereference when IPv6 is not enabled Greg Kroah-Hartman
` (120 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jack Pham, Albert Wang
From: Albert Wang <albertccwang@google.com>
commit 26288448120b28af1dfd85a6fa6b6d55a16c7f2f upstream.
In the endpoint interrupt functions
dwc3_gadget_endpoint_transfer_in_progress() and
dwc3_gadget_endpoint_trbs_complete() will dereference the endpoint
descriptor. But it could be cleared in __dwc3_gadget_ep_disable()
when accessory disconnected. So we need to check whether it is null
or not before dereferencing it.
Fixes: f09ddcfcb8c5 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Jack Pham <quic_jackp@quicinc.com>
Signed-off-by: Albert Wang <albertccwang@google.com>
Link: https://lore.kernel.org/r/20211109092642.3507692-1-albertccwang@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/gadget.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2918,6 +2918,9 @@ static bool dwc3_gadget_endpoint_trbs_co
struct dwc3 *dwc = dep->dwc;
bool no_started_trb = true;
+ if (!dep->endpoint.desc)
+ return no_started_trb;
+
dwc3_gadget_ep_cleanup_completed_requests(dep, event, status);
if (dep->flags & DWC3_EP_END_TRANSFER_PENDING)
@@ -2965,6 +2968,9 @@ static void dwc3_gadget_endpoint_transfe
{
int status = 0;
+ if (!dep->endpoint.desc)
+ return;
+
if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
dwc3_gadget_endpoint_frame_from_event(dep, event);
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 010/121] net: nexthop: fix null pointer dereference when IPv6 is not enabled
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 009/121] usb: dwc3: gadget: Fix null pointer exception Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 011/121] usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probe Greg Kroah-Hartman
` (119 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nikolay Aleksandrov, David S. Miller
From: Nikolay Aleksandrov <nikolay@nvidia.com>
commit 1c743127cc54b112b155f434756bd4b5fa565a99 upstream.
When we try to add an IPv6 nexthop and IPv6 is not enabled
(!CONFIG_IPV6) we'll hit a NULL pointer dereference[1] in the error path
of nh_create_ipv6() due to calling ipv6_stub->fib6_nh_release. The bug
has been present since the beginning of IPv6 nexthop gateway support.
Commit 1aefd3de7bc6 ("ipv6: Add fib6_nh_init and release to stubs") tells
us that only fib6_nh_init has a dummy stub because fib6_nh_release should
not be called if fib6_nh_init returns an error, but the commit below added
a call to ipv6_stub->fib6_nh_release in its error path. To fix it return
the dummy stub's -EAFNOSUPPORT error directly without calling
ipv6_stub->fib6_nh_release in nh_create_ipv6()'s error path.
[1]
Output is a bit truncated, but it clearly shows the error.
BUG: kernel NULL pointer dereference, address: 000000000000000000
#PF: supervisor instruction fetch in kernel modede
#PF: error_code(0x0010) - not-present pagege
PGD 0 P4D 0
Oops: 0010 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 638 Comm: ip Kdump: loaded Not tainted 5.16.0-rc1+ #446
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffff888109f5b8f0 EFLAGS: 00010286^Ac
RAX: 0000000000000000 RBX: ffff888109f5ba28 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8881008a2860
RBP: ffff888109f5b9d8 R08: 0000000000000000 R09: 0000000000000000
R10: ffff888109f5b978 R11: ffff888109f5b948 R12: 00000000ffffff9f
R13: ffff8881008a2a80 R14: ffff8881008a2860 R15: ffff8881008a2840
FS: 00007f98de70f100(0000) GS:ffff88822bf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000100efc000 CR4: 00000000000006e0
Call Trace:
<TASK>
nh_create_ipv6+0xed/0x10c
rtm_new_nexthop+0x6d7/0x13f3
? check_preemption_disabled+0x3d/0xf2
? lock_is_held_type+0xbe/0xfd
rtnetlink_rcv_msg+0x23f/0x26a
? check_preemption_disabled+0x3d/0xf2
? rtnl_calcit.isra.0+0x147/0x147
netlink_rcv_skb+0x61/0xb2
netlink_unicast+0x100/0x187
netlink_sendmsg+0x37f/0x3a0
? netlink_unicast+0x187/0x187
sock_sendmsg_nosec+0x67/0x9b
____sys_sendmsg+0x19d/0x1f9
? copy_msghdr_from_user+0x4c/0x5e
? rcu_read_lock_any_held+0x2a/0x78
___sys_sendmsg+0x6c/0x8c
? asm_sysvec_apic_timer_interrupt+0x12/0x20
? lockdep_hardirqs_on+0xd9/0x102
? sockfd_lookup_light+0x69/0x99
__sys_sendmsg+0x50/0x6e
do_syscall_64+0xcb/0xf2
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f98dea28914
Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 e9 5d 0c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53
RSP: 002b:00007fff859f5e68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e2e
RAX: ffffffffffffffda RBX: 00000000619cb810 RCX: 00007f98dea28914
RDX: 0000000000000000 RSI: 00007fff859f5ed0 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000008
R10: fffffffffffffce6 R11: 0000000000000246 R12: 0000000000000001
R13: 000055c0097ae520 R14: 000055c0097957fd R15: 00007fff859f63a0
</TASK>
Modules linked in: bridge stp llc bonding virtio_net
Cc: stable@vger.kernel.org
Fixes: 53010f991a9f ("nexthop: Add support for IPv6 gateways")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/nexthop.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/net/ipv4/nexthop.c
+++ b/net/ipv4/nexthop.c
@@ -1355,11 +1355,15 @@ static int nh_create_ipv6(struct net *ne
/* sets nh_dev if successful */
err = ipv6_stub->fib6_nh_init(net, fib6_nh, &fib6_cfg, GFP_KERNEL,
extack);
- if (err)
+ if (err) {
+ /* IPv6 is not enabled, don't call fib6_nh_release */
+ if (err == -EAFNOSUPPORT)
+ goto out;
ipv6_stub->fib6_nh_release(fib6_nh);
- else
+ } else {
nh->nh_flags = fib6_nh->fib_nh_flags;
-
+ }
+out:
return err;
}
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 011/121] usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probe
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 010/121] net: nexthop: fix null pointer dereference when IPv6 is not enabled Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 012/121] usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts Greg Kroah-Hartman
` (118 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter
From: Dan Carpenter <dan.carpenter@oracle.com>
commit d4d2e5329ae9dfd6742c84d79f7d143d10410f1b upstream.
If the first call to devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0)
fails with something other than -ENODEV then it leads to an error
pointer dereference. For those errors we should just jump directly to
the error handling.
Fixes: 8253a34bfae3 ("usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211117074923.GF5237@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -425,15 +425,15 @@ static int ci_hdrc_imx_probe(struct plat
data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0);
if (IS_ERR(data->phy)) {
ret = PTR_ERR(data->phy);
- if (ret == -ENODEV) {
- data->phy = devm_usb_get_phy_by_phandle(dev, "phys", 0);
- if (IS_ERR(data->phy)) {
- ret = PTR_ERR(data->phy);
- if (ret == -ENODEV)
- data->phy = NULL;
- else
- goto err_clk;
- }
+ if (ret != -ENODEV)
+ goto err_clk;
+ data->phy = devm_usb_get_phy_by_phandle(dev, "phys", 0);
+ if (IS_ERR(data->phy)) {
+ ret = PTR_ERR(data->phy);
+ if (ret == -ENODEV)
+ data->phy = NULL;
+ else
+ goto err_clk;
}
}
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 012/121] usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 011/121] usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probe Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 013/121] usb: hub: Fix usb enumeration issue due to address0 race Greg Kroah-Hartman
` (117 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Heikki Krogerus,
Ondrej Jirman
From: Ondrej Jirman <megous@megous.com>
commit 362468830dd5bea8bf6ad5203b2ea61f8a4e8288 upstream.
The code that enables either BC_LVL or COMP_CHNG interrupt in tcpm_set_cc
wrongly assumes that the interrupt is unmasked by writing 1 to the apropriate
bit in the mask register. In fact, interrupts are enabled when the mask
is 0, so the tcpm_set_cc enables interrupt for COMP_CHNG when it expects
BC_LVL interrupt to be enabled.
This causes inability of the driver to recognize cable unplug events
in host mode (unplug is recognized only via a COMP_CHNG interrupt).
In device mode this bug was masked by simultaneous triggering of the VBUS
change interrupt, because of loss of VBUS when the port peer is providing
power.
Fixes: 48242e30532b ("usb: typec: fusb302: Revert "Resolve fixed power role contract setup"")
Cc: stable <stable@vger.kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Link: https://lore.kernel.org/r/20211108102833.2793803-1-megous@megous.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/typec/tcpm/fusb302.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -669,25 +669,27 @@ static int tcpm_set_cc(struct tcpc_dev *
ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
FUSB_REG_MASK_BC_LVL |
FUSB_REG_MASK_COMP_CHNG,
- FUSB_REG_MASK_COMP_CHNG);
+ FUSB_REG_MASK_BC_LVL);
if (ret < 0) {
fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
ret);
goto done;
}
chip->intr_comp_chng = true;
+ chip->intr_bc_lvl = false;
break;
case TYPEC_CC_RD:
ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
FUSB_REG_MASK_BC_LVL |
FUSB_REG_MASK_COMP_CHNG,
- FUSB_REG_MASK_BC_LVL);
+ FUSB_REG_MASK_COMP_CHNG);
if (ret < 0) {
fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
ret);
goto done;
}
chip->intr_bc_lvl = true;
+ chip->intr_comp_chng = false;
break;
default:
break;
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 013/121] usb: hub: Fix usb enumeration issue due to address0 race
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 012/121] usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 014/121] usb: hub: Fix locking issues with address0_mutex Greg Kroah-Hartman
` (116 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathias Nyman
From: Mathias Nyman <mathias.nyman@linux.intel.com>
commit 6ae6dc22d2d1ce6aa77a6da8a761e61aca216f8b upstream.
xHC hardware can only have one slot in default state with address 0
waiting for a unique address at a time, otherwise "undefined behavior
may occur" according to xhci spec 5.4.3.4
The address0_mutex exists to prevent this across both xhci roothubs.
If hub_port_init() fails, it may unlock the mutex and exit with a xhci
slot in default state. If the other xhci roothub calls hub_port_init()
at this point we end up with two slots in default state.
Make sure the address0_mutex protects the slot default state across
hub_port_init() retries, until slot is addressed or disabled.
Note, one known minor case is not fixed by this patch.
If device needs to be reset during resume, but fails all hub_port_init()
retries in usb_reset_and_verify_device(), then it's possible the slot is
still left in default state when address0_mutex is unlocked.
Cc: <stable@vger.kernel.org>
Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211115221630.871204-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/hub.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4628,8 +4628,6 @@ hub_port_init(struct usb_hub *hub, struc
if (oldspeed == USB_SPEED_LOW)
delay = HUB_LONG_RESET_TIME;
- mutex_lock(hcd->address0_mutex);
-
/* Reset the device; full speed may morph to high speed */
/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
retval = hub_port_reset(hub, port1, udev, delay, false);
@@ -4940,7 +4938,6 @@ fail:
hub_port_disable(hub, port1, 0);
update_devnum(udev, devnum); /* for disconnect processing */
}
- mutex_unlock(hcd->address0_mutex);
return retval;
}
@@ -5170,6 +5167,9 @@ static void hub_port_connect(struct usb_
unit_load = 100;
status = 0;
+
+ mutex_lock(hcd->address0_mutex);
+
for (i = 0; i < PORT_INIT_TRIES; i++) {
/* reallocate for each attempt, since references
@@ -5206,6 +5206,8 @@ static void hub_port_connect(struct usb_
if (status < 0)
goto loop;
+ mutex_unlock(hcd->address0_mutex);
+
if (udev->quirks & USB_QUIRK_DELAY_INIT)
msleep(2000);
@@ -5294,6 +5296,7 @@ static void hub_port_connect(struct usb_
loop_disable:
hub_port_disable(hub, port1, 1);
+ mutex_lock(hcd->address0_mutex);
loop:
usb_ep0_reinit(udev);
release_devnum(udev);
@@ -5320,6 +5323,8 @@ loop:
}
done:
+ mutex_unlock(hcd->address0_mutex);
+
hub_port_disable(hub, port1, 1);
if (hcd->driver->relinquish_port && !hub->hdev->parent) {
if (status != -ENOTCONN && status != -ENODEV)
@@ -5839,6 +5844,8 @@ static int usb_reset_and_verify_device(s
bos = udev->bos;
udev->bos = NULL;
+ mutex_lock(hcd->address0_mutex);
+
for (i = 0; i < PORT_INIT_TRIES; ++i) {
/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5848,6 +5855,7 @@ static int usb_reset_and_verify_device(s
if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
break;
}
+ mutex_unlock(hcd->address0_mutex);
if (ret < 0)
goto re_enumerate;
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 014/121] usb: hub: Fix locking issues with address0_mutex
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 013/121] usb: hub: Fix usb enumeration issue due to address0 race Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 015/121] binder: fix test regression due to sender_euid change Greg Kroah-Hartman
` (115 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Szyprowski, Hans de Goede,
Mathias Nyman
From: Mathias Nyman <mathias.nyman@linux.intel.com>
commit 6cca13de26eea6d32a98d96d916a048d16a12822 upstream.
Fix the circular lock dependency and unbalanced unlock of addess0_mutex
introduced when fixing an address0_mutex enumeration retry race in commit
ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race")
Make sure locking order between port_dev->status_lock and address0_mutex
is correct, and that address0_mutex is not unlocked in hub_port_connect
"done:" codepath which may be reached without locking address0_mutex
Fixes: 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race")
Cc: <stable@vger.kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211123101656.1113518-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/hub.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5112,6 +5112,7 @@ static void hub_port_connect(struct usb_
struct usb_port *port_dev = hub->ports[port1 - 1];
struct usb_device *udev = port_dev->child;
static int unreliable_port = -1;
+ bool retry_locked;
/* Disconnect any existing devices under this port */
if (udev) {
@@ -5168,10 +5169,10 @@ static void hub_port_connect(struct usb_
status = 0;
- mutex_lock(hcd->address0_mutex);
-
for (i = 0; i < PORT_INIT_TRIES; i++) {
-
+ usb_lock_port(port_dev);
+ mutex_lock(hcd->address0_mutex);
+ retry_locked = true;
/* reallocate for each attempt, since references
* to the previous one can escape in various ways
*/
@@ -5179,6 +5180,8 @@ static void hub_port_connect(struct usb_
if (!udev) {
dev_err(&port_dev->dev,
"couldn't allocate usb_device\n");
+ mutex_unlock(hcd->address0_mutex);
+ usb_unlock_port(port_dev);
goto done;
}
@@ -5200,13 +5203,13 @@ static void hub_port_connect(struct usb_
}
/* reset (non-USB 3.0 devices) and get descriptor */
- usb_lock_port(port_dev);
status = hub_port_init(hub, udev, port1, i);
- usb_unlock_port(port_dev);
if (status < 0)
goto loop;
mutex_unlock(hcd->address0_mutex);
+ usb_unlock_port(port_dev);
+ retry_locked = false;
if (udev->quirks & USB_QUIRK_DELAY_INIT)
msleep(2000);
@@ -5296,11 +5299,14 @@ static void hub_port_connect(struct usb_
loop_disable:
hub_port_disable(hub, port1, 1);
- mutex_lock(hcd->address0_mutex);
loop:
usb_ep0_reinit(udev);
release_devnum(udev);
hub_free_dev(udev);
+ if (retry_locked) {
+ mutex_unlock(hcd->address0_mutex);
+ usb_unlock_port(port_dev);
+ }
usb_put_dev(udev);
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
break;
@@ -5323,8 +5329,6 @@ loop:
}
done:
- mutex_unlock(hcd->address0_mutex);
-
hub_port_disable(hub, port1, 1);
if (hcd->driver->relinquish_port && !hub->hdev->parent) {
if (status != -ENOTCONN && status != -ENODEV)
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 015/121] binder: fix test regression due to sender_euid change
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 014/121] usb: hub: Fix locking issues with address0_mutex Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 016/121] ALSA: ctxfi: Fix out-of-range access Greg Kroah-Hartman
` (114 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Christian Brauner, Todd Kjos
From: Todd Kjos <tkjos@google.com>
commit c21a80ca0684ec2910344d72556c816cb8940c01 upstream.
This is a partial revert of commit
29bc22ac5e5b ("binder: use euid from cred instead of using task").
Setting sender_euid using proc->cred caused some Android system test
regressions that need further investigation. It is a partial
reversion because subsequent patches rely on proc->cred.
Fixes: 29bc22ac5e5b ("binder: use euid from cred instead of using task")
Cc: stable@vger.kernel.org # 4.4+
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Change-Id: I9b1769a3510fed250bb21859ef8beebabe034c66
Link: https://lore.kernel.org/r/20211112180720.2858135-1-tkjos@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/android/binder.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -3091,7 +3091,7 @@ static void binder_transaction(struct bi
t->from = thread;
else
t->from = NULL;
- t->sender_euid = proc->cred->euid;
+ t->sender_euid = task_euid(proc->tsk);
t->to_proc = target_proc;
t->to_thread = target_thread;
t->code = tr->code;
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 016/121] ALSA: ctxfi: Fix out-of-range access
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 015/121] binder: fix test regression due to sender_euid change Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 017/121] ALSA: hda/realtek: Add quirk for ASRock NUC Box 1100 Greg Kroah-Hartman
` (113 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 76c47183224c86e4011048b80f0e2d0d166f01c2 upstream.
The master and next_conj of rcs_ops are used for iterating the
resource list entries, and currently those are supposed to return the
current value. The problem is that next_conf may go over the last
entry before the loop abort condition is evaluated, and it may return
the "current" value that is beyond the array size. It was caught
recently as a GPF, for example.
Those return values are, however, never actually evaluated, hence
basically we don't have to consider the current value as the return at
all. By dropping those return values, the potential out-of-range
access above is also fixed automatically.
This patch changes the return type of master and next_conj callbacks
to void and drop the superfluous code accordingly.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214985
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211118215729.26257-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/ctxfi/ctamixer.c | 14 ++++++--------
sound/pci/ctxfi/ctdaio.c | 16 ++++++++--------
sound/pci/ctxfi/ctresource.c | 7 +++----
sound/pci/ctxfi/ctresource.h | 4 ++--
sound/pci/ctxfi/ctsrc.c | 7 +++----
5 files changed, 22 insertions(+), 26 deletions(-)
--- a/sound/pci/ctxfi/ctamixer.c
+++ b/sound/pci/ctxfi/ctamixer.c
@@ -23,16 +23,15 @@
#define BLANK_SLOT 4094
-static int amixer_master(struct rsc *rsc)
+static void amixer_master(struct rsc *rsc)
{
rsc->conj = 0;
- return rsc->idx = container_of(rsc, struct amixer, rsc)->idx[0];
+ rsc->idx = container_of(rsc, struct amixer, rsc)->idx[0];
}
-static int amixer_next_conj(struct rsc *rsc)
+static void amixer_next_conj(struct rsc *rsc)
{
rsc->conj++;
- return container_of(rsc, struct amixer, rsc)->idx[rsc->conj];
}
static int amixer_index(const struct rsc *rsc)
@@ -331,16 +330,15 @@ int amixer_mgr_destroy(struct amixer_mgr
/* SUM resource management */
-static int sum_master(struct rsc *rsc)
+static void sum_master(struct rsc *rsc)
{
rsc->conj = 0;
- return rsc->idx = container_of(rsc, struct sum, rsc)->idx[0];
+ rsc->idx = container_of(rsc, struct sum, rsc)->idx[0];
}
-static int sum_next_conj(struct rsc *rsc)
+static void sum_next_conj(struct rsc *rsc)
{
rsc->conj++;
- return container_of(rsc, struct sum, rsc)->idx[rsc->conj];
}
static int sum_index(const struct rsc *rsc)
--- a/sound/pci/ctxfi/ctdaio.c
+++ b/sound/pci/ctxfi/ctdaio.c
@@ -51,12 +51,12 @@ static const struct daio_rsc_idx idx_20k
[SPDIFIO] = {.left = 0x05, .right = 0x85},
};
-static int daio_master(struct rsc *rsc)
+static void daio_master(struct rsc *rsc)
{
/* Actually, this is not the resource index of DAIO.
* For DAO, it is the input mapper index. And, for DAI,
* it is the output time-slot index. */
- return rsc->conj = rsc->idx;
+ rsc->conj = rsc->idx;
}
static int daio_index(const struct rsc *rsc)
@@ -64,19 +64,19 @@ static int daio_index(const struct rsc *
return rsc->conj;
}
-static int daio_out_next_conj(struct rsc *rsc)
+static void daio_out_next_conj(struct rsc *rsc)
{
- return rsc->conj += 2;
+ rsc->conj += 2;
}
-static int daio_in_next_conj_20k1(struct rsc *rsc)
+static void daio_in_next_conj_20k1(struct rsc *rsc)
{
- return rsc->conj += 0x200;
+ rsc->conj += 0x200;
}
-static int daio_in_next_conj_20k2(struct rsc *rsc)
+static void daio_in_next_conj_20k2(struct rsc *rsc)
{
- return rsc->conj += 0x100;
+ rsc->conj += 0x100;
}
static const struct rsc_ops daio_out_rsc_ops = {
--- a/sound/pci/ctxfi/ctresource.c
+++ b/sound/pci/ctxfi/ctresource.c
@@ -109,18 +109,17 @@ static int audio_ring_slot(const struct
return (rsc->conj << 4) + offset_in_audio_slot_block[rsc->type];
}
-static int rsc_next_conj(struct rsc *rsc)
+static void rsc_next_conj(struct rsc *rsc)
{
unsigned int i;
for (i = 0; (i < 8) && (!(rsc->msr & (0x1 << i))); )
i++;
rsc->conj += (AUDIO_SLOT_BLOCK_NUM >> i);
- return rsc->conj;
}
-static int rsc_master(struct rsc *rsc)
+static void rsc_master(struct rsc *rsc)
{
- return rsc->conj = rsc->idx;
+ rsc->conj = rsc->idx;
}
static const struct rsc_ops rsc_generic_ops = {
--- a/sound/pci/ctxfi/ctresource.h
+++ b/sound/pci/ctxfi/ctresource.h
@@ -39,8 +39,8 @@ struct rsc {
};
struct rsc_ops {
- int (*master)(struct rsc *rsc); /* Move to master resource */
- int (*next_conj)(struct rsc *rsc); /* Move to next conjugate resource */
+ void (*master)(struct rsc *rsc); /* Move to master resource */
+ void (*next_conj)(struct rsc *rsc); /* Move to next conjugate resource */
int (*index)(const struct rsc *rsc); /* Return the index of resource */
/* Return the output slot number */
int (*output_slot)(const struct rsc *rsc);
--- a/sound/pci/ctxfi/ctsrc.c
+++ b/sound/pci/ctxfi/ctsrc.c
@@ -590,16 +590,15 @@ int src_mgr_destroy(struct src_mgr *src_
/* SRCIMP resource manager operations */
-static int srcimp_master(struct rsc *rsc)
+static void srcimp_master(struct rsc *rsc)
{
rsc->conj = 0;
- return rsc->idx = container_of(rsc, struct srcimp, rsc)->idx[0];
+ rsc->idx = container_of(rsc, struct srcimp, rsc)->idx[0];
}
-static int srcimp_next_conj(struct rsc *rsc)
+static void srcimp_next_conj(struct rsc *rsc)
{
rsc->conj++;
- return container_of(rsc, struct srcimp, rsc)->idx[rsc->conj];
}
static int srcimp_index(const struct rsc *rsc)
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 017/121] ALSA: hda/realtek: Add quirk for ASRock NUC Box 1100
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 016/121] ALSA: ctxfi: Fix out-of-range access Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 018/121] ALSA: hda/realtek: Fix LED on HP ProBook 435 G7 Greg Kroah-Hartman
` (112 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Werner Sembach, Takashi Iwai
From: Werner Sembach <wse@tuxedocomputers.com>
commit 174a7fb3859ae75b0f0e35ef852459d8882b55b5 upstream.
This applies a SND_PCI_QUIRK(...) to the ASRock NUC Box 1100 series. This
fixes the issue of the headphone jack not being detected unless warm
rebooted from a certain other OS.
When booting a certain other OS some coeff settings are changed that enable
the audio jack. These settings are preserved on a warm reboot and can be
easily dumped.
The relevant indexes and values where gathered by naively diff-ing and
reading a working and a non-working coeff dump.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211112110704.1022501-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6467,6 +6467,27 @@ static void alc256_fixup_tongfang_reset_
alc_write_coef_idx(codec, 0x45, 0x5089);
}
+static const struct coef_fw alc233_fixup_no_audio_jack_coefs[] = {
+ WRITE_COEF(0x1a, 0x9003), WRITE_COEF(0x1b, 0x0e2b), WRITE_COEF(0x37, 0xfe06),
+ WRITE_COEF(0x38, 0x4981), WRITE_COEF(0x45, 0xd489), WRITE_COEF(0x46, 0x0074),
+ WRITE_COEF(0x49, 0x0149),
+ {}
+};
+
+static void alc233_fixup_no_audio_jack(struct hda_codec *codec,
+ const struct hda_fixup *fix,
+ int action)
+{
+ /*
+ * The audio jack input and output is not detected on the ASRock NUC Box
+ * 1100 series when cold booting without this fix. Warm rebooting from a
+ * certain other OS makes the audio functional, as COEF settings are
+ * preserved in this case. This fix sets these altered COEF values as
+ * the default.
+ */
+ alc_process_coef_fw(codec, alc233_fixup_no_audio_jack_coefs);
+}
+
enum {
ALC269_FIXUP_GPIO2,
ALC269_FIXUP_SONY_VAIO,
@@ -6685,6 +6706,7 @@ enum {
ALC287_FIXUP_13S_GEN2_SPEAKERS,
ALC256_FIXUP_TONGFANG_RESET_PERSISTENT_SETTINGS,
ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE,
+ ALC233_FIXUP_NO_AUDIO_JACK,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -8399,6 +8421,10 @@ static const struct hda_fixup alc269_fix
.chained = true,
.chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC,
},
+ [ALC233_FIXUP_NO_AUDIO_JACK] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc233_fixup_no_audio_jack,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8831,6 +8857,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x17aa, 0x511e, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
SND_PCI_QUIRK(0x17aa, 0x511f, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD),
+ SND_PCI_QUIRK(0x1849, 0x1233, "ASRock NUC Box 1100", ALC233_FIXUP_NO_AUDIO_JACK),
SND_PCI_QUIRK(0x19e5, 0x3204, "Huawei MACH-WX9", ALC256_FIXUP_HUAWEI_MACH_WX9_PINS),
SND_PCI_QUIRK(0x1b35, 0x1235, "CZC B20", ALC269_FIXUP_CZC_B20),
SND_PCI_QUIRK(0x1b35, 0x1236, "CZC TMI", ALC269_FIXUP_CZC_TMI),
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 018/121] ALSA: hda/realtek: Fix LED on HP ProBook 435 G7
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 017/121] ALSA: hda/realtek: Add quirk for ASRock NUC Box 1100 Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 019/121] media: cec: copy sequence field for the reply Greg Kroah-Hartman
` (111 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 05ec7161084565365ecf267e9909a897a95f243a upstream.
HP ProBook 435 G7 (SSID 103c:8735) needs the similar quirk as another
HP ProBook for enabling the mute and the mic-mute LEDs.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215021
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211118071636.14738-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8604,6 +8604,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x103c, 0x8728, "HP EliteBook 840 G7", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8729, "HP", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8730, "HP ProBook 445 G7", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
+ SND_PCI_QUIRK(0x103c, 0x8735, "HP ProBook 435 G7", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
SND_PCI_QUIRK(0x103c, 0x8736, "HP", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8760, "HP", ALC285_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x103c, 0x877a, "HP", ALC285_FIXUP_HP_MUTE_LED),
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 019/121] media: cec: copy sequence field for the reply
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 018/121] ALSA: hda/realtek: Fix LED on HP ProBook 435 G7 Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 020/121] Revert "parisc: Fix backtrace to always include init funtion names" Greg Kroah-Hartman
` (110 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans Verkuil, Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
commit 13cbaa4c2b7bf9f8285e1164d005dbf08244ecd5 upstream.
When the reply for a non-blocking transmit arrives, the sequence
field for that reply was never filled in, so userspace would have no
way of associating the reply to the original transmit.
Copy the sequence field to ensure that this is now possible.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0dbacebede1e ([media] cec: move the CEC framework out of staging and to media)
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/cec/core/cec-adap.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/media/cec/core/cec-adap.c
+++ b/drivers/media/cec/core/cec-adap.c
@@ -1199,6 +1199,7 @@ void cec_received_msg_ts(struct cec_adap
if (abort)
dst->rx_status |= CEC_RX_STATUS_FEATURE_ABORT;
msg->flags = dst->flags;
+ msg->sequence = dst->sequence;
/* Remove it from the wait_queue */
list_del_init(&data->list);
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 020/121] Revert "parisc: Fix backtrace to always include init funtion names"
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 019/121] media: cec: copy sequence field for the reply Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 021/121] HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts Greg Kroah-Hartman
` (109 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Helge Deller, stable
From: Helge Deller <deller@gmx.de>
commit 98400ad75e95860e9a10ec78b0b90ab66184a2ce upstream.
This reverts commit 279917e27edc293eb645a25428c6ab3f3bca3f86.
With the CONFIG_HARDENED_USERCOPY option enabled, this patch triggers
kernel bugs at runtime:
usercopy: Kernel memory overwrite attempt detected to kernel text (offset 2084839, size 6)!
kernel BUG at mm/usercopy.c:99!
Backtrace:
IAOQ[0]: usercopy_abort+0xc4/0xe8
[<00000000406ed1c8>] __check_object_size+0x174/0x238
[<00000000407086d4>] copy_strings.isra.0+0x3e8/0x708
[<0000000040709a20>] do_execveat_common.isra.0+0x1bc/0x328
[<000000004070b760>] compat_sys_execve+0x7c/0xb8
[<0000000040303eb8>] syscall_exit+0x0/0x14
The problem is, that we have an init section of at least 2MB size which
starts at _stext and is freed after bootup.
If then later some kernel data is (temporarily) stored in this free
memory, check_kernel_text_object() will trigger a bug since the data
appears to be inside the kernel text (>=_stext) area:
if (overlaps(ptr, len, _stext, _etext))
usercopy_abort("kernel text");
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@kernel.org # 5.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/parisc/kernel/vmlinux.lds.S | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -57,8 +57,6 @@ SECTIONS
{
. = KERNEL_BINARY_TEXT_START;
- _stext = .; /* start of kernel text, includes init code & data */
-
__init_begin = .;
HEAD_TEXT_SECTION
MLONGCALL_DISCARD(INIT_TEXT_SECTION(8))
@@ -82,6 +80,7 @@ SECTIONS
/* freed after init ends here */
_text = .; /* Text and read-only data */
+ _stext = .;
MLONGCALL_KEEP(INIT_TEXT_SECTION(8))
.text ALIGN(PAGE_SIZE) : {
TEXT_TEXT
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 021/121] HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 020/121] Revert "parisc: Fix backtrace to always include init funtion names" Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 022/121] staging/fbtft: Fix backlight Greg Kroah-Hartman
` (108 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason Gerecke, Joshua Dickens, Jiri Kosina
From: Jason Gerecke <killertofu@gmail.com>
commit 7fb0413baa7f8a04caef0c504df9af7e0623d296 upstream.
The HID descriptor of many of Wacom's touch input devices include a
"Confidence" usage that signals if a particular touch collection contains
useful data. The driver does not look at this flag, however, which causes
even invalid contacts to be reported to userspace. A lucky combination of
kernel event filtering and device behavior (specifically: contact ID 0 ==
invalid, contact ID >0 == valid; and order all data so that all valid
contacts are reported before any invalid contacts) spare most devices from
any visibly-bad behavior.
The DTH-2452 is one example of an unlucky device that misbehaves. It uses
ID 0 for both the first valid contact and all invalid contacts. Because
we report both the valid and invalid contacts, the kernel reports that
contact 0 first goes down (valid) and then goes up (invalid) in every
report. This causes ~100 clicks per second simply by touching the screen.
This patch inroduces new `confidence` flag in our `hid_data` structure.
The value is initially set to `true` at the start of a report and can be
set to `false` if an invalid touch usage is seen.
Link: https://github.com/linuxwacom/input-wacom/issues/270
Fixes: f8b6a74719b5 ("HID: wacom: generic: Support multiple tools per report")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/wacom_wac.c | 8 +++++++-
drivers/hid/wacom_wac.h | 1 +
2 files changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2578,6 +2578,9 @@ static void wacom_wac_finger_event(struc
return;
switch (equivalent_usage) {
+ case HID_DG_CONFIDENCE:
+ wacom_wac->hid_data.confidence = value;
+ break;
case HID_GD_X:
wacom_wac->hid_data.x = value;
break;
@@ -2610,7 +2613,8 @@ static void wacom_wac_finger_event(struc
}
if (usage->usage_index + 1 == field->report_count) {
- if (equivalent_usage == wacom_wac->hid_data.last_slot_field)
+ if (equivalent_usage == wacom_wac->hid_data.last_slot_field &&
+ wacom_wac->hid_data.confidence)
wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input);
}
}
@@ -2625,6 +2629,8 @@ static void wacom_wac_finger_pre_report(
wacom_wac->is_invalid_bt_frame = false;
+ hid_data->confidence = true;
+
for (i = 0; i < report->maxfield; i++) {
struct hid_field *field = report->field[i];
int j;
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -300,6 +300,7 @@ struct hid_data {
bool tipswitch;
bool barrelswitch;
bool barrelswitch2;
+ bool confidence;
int x;
int y;
int pressure;
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 022/121] staging/fbtft: Fix backlight
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 021/121] HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 023/121] staging: greybus: Add missing rwsem around snd_ctl_remove() calls Greg Kroah-Hartman
` (107 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sam Ravnborg, Noralf Trønnes
From: Noralf Trønnes <noralf@tronnes.org>
commit 7865dd24934ad580d1bcde8f63c39f324211a23b upstream.
Commit b4a1ed0cd18b ("fbdev: make FB_BACKLIGHT a tristate") forgot to
update fbtft breaking its backlight support when FB_BACKLIGHT is a module.
Since FB_TFT selects FB_BACKLIGHT there's no need for this conditional
so just remove it and we're good.
Fixes: b4a1ed0cd18b ("fbdev: make FB_BACKLIGHT a tristate")
Cc: <stable@vger.kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20211105204358.2991-1-noralf@tronnes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/fbtft/fb_ssd1351.c | 4 ----
drivers/staging/fbtft/fbtft-core.c | 9 +--------
2 files changed, 1 insertion(+), 12 deletions(-)
--- a/drivers/staging/fbtft/fb_ssd1351.c
+++ b/drivers/staging/fbtft/fb_ssd1351.c
@@ -187,7 +187,6 @@ static struct fbtft_display display = {
},
};
-#ifdef CONFIG_FB_BACKLIGHT
static int update_onboard_backlight(struct backlight_device *bd)
{
struct fbtft_par *par = bl_get_data(bd);
@@ -231,9 +230,6 @@ static void register_onboard_backlight(s
if (!par->fbtftops.unregister_backlight)
par->fbtftops.unregister_backlight = fbtft_unregister_backlight;
}
-#else
-static void register_onboard_backlight(struct fbtft_par *par) { };
-#endif
FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1351", &display);
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -128,7 +128,6 @@ static int fbtft_request_gpios(struct fb
return 0;
}
-#ifdef CONFIG_FB_BACKLIGHT
static int fbtft_backlight_update_status(struct backlight_device *bd)
{
struct fbtft_par *par = bl_get_data(bd);
@@ -161,6 +160,7 @@ void fbtft_unregister_backlight(struct f
par->info->bl_dev = NULL;
}
}
+EXPORT_SYMBOL(fbtft_unregister_backlight);
static const struct backlight_ops fbtft_bl_ops = {
.get_brightness = fbtft_backlight_get_brightness,
@@ -198,12 +198,7 @@ void fbtft_register_backlight(struct fbt
if (!par->fbtftops.unregister_backlight)
par->fbtftops.unregister_backlight = fbtft_unregister_backlight;
}
-#else
-void fbtft_register_backlight(struct fbtft_par *par) { };
-void fbtft_unregister_backlight(struct fbtft_par *par) { };
-#endif
EXPORT_SYMBOL(fbtft_register_backlight);
-EXPORT_SYMBOL(fbtft_unregister_backlight);
static void fbtft_set_addr_win(struct fbtft_par *par, int xs, int ys, int xe,
int ye)
@@ -853,13 +848,11 @@ int fbtft_register_framebuffer(struct fb
fb_info->fix.smem_len >> 10, text1,
HZ / fb_info->fbdefio->delay, text2);
-#ifdef CONFIG_FB_BACKLIGHT
/* Turn on backlight if available */
if (fb_info->bl_dev) {
fb_info->bl_dev->props.power = FB_BLANK_UNBLANK;
fb_info->bl_dev->ops->update_status(fb_info->bl_dev);
}
-#endif
return 0;
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 023/121] staging: greybus: Add missing rwsem around snd_ctl_remove() calls
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 022/121] staging/fbtft: Fix backlight Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 024/121] staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect() Greg Kroah-Hartman
` (106 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit ffcf7ae90f4489047d7b076539ba207024dea5f6 upstream.
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch adds the missing
rwsem calls around it.
Fixes: 510e340efe0c ("staging: greybus: audio: Add helper APIs for dynamic audio modules")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211116072027.18466-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/greybus/audio_helper.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/staging/greybus/audio_helper.c
+++ b/drivers/staging/greybus/audio_helper.c
@@ -192,7 +192,11 @@ int gbaudio_remove_component_controls(st
unsigned int num_controls)
{
struct snd_card *card = component->card->snd_card;
+ int err;
- return gbaudio_remove_controls(card, component->dev, controls,
- num_controls, component->name_prefix);
+ down_write(&card->controls_rwsem);
+ err = gbaudio_remove_controls(card, component->dev, controls,
+ num_controls, component->name_prefix);
+ up_write(&card->controls_rwsem);
+ return err;
}
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 024/121] staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 023/121] staging: greybus: Add missing rwsem around snd_ctl_remove() calls Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 025/121] fuse: release pipe buf after last use Greg Kroah-Hartman
` (105 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter
From: Dan Carpenter <dan.carpenter@oracle.com>
commit b535917c51acc97fb0761b1edec85f1f3d02bda4 upstream.
The free_rtllib() function frees the "dev" pointer so there is use
after free on the next line. Re-arrange things to avoid that.
Fixes: 66898177e7e5 ("staging: rtl8192e: Fix unload/reload problem")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211117072016.GA5237@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -2551,13 +2551,14 @@ static void _rtl92e_pci_disconnect(struc
free_irq(dev->irq, dev);
priv->irq = 0;
}
- free_rtllib(dev);
if (dev->mem_start != 0) {
iounmap((void __iomem *)dev->mem_start);
release_mem_region(pci_resource_start(pdev, 1),
pci_resource_len(pdev, 1));
}
+
+ free_rtllib(dev);
} else {
priv = rtllib_priv(dev);
}
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 025/121] fuse: release pipe buf after last use
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 024/121] staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect() Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 026/121] xen: dont continue xenstore initialization in case of errors Greg Kroah-Hartman
` (104 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Justin Forbes, Miklos Szeredi
From: Miklos Szeredi <mszeredi@redhat.com>
commit 473441720c8616dfaf4451f9c7ea14f0eb5e5d65 upstream.
Checking buf->flags should be done before the pipe_buf_release() is called
on the pipe buffer, since releasing the buffer might modify the flags.
This is exactly what page_cache_pipe_buf_release() does, and which results
in the same VM_BUG_ON_PAGE(PageLRU(page)) that the original patch was
trying to fix.
Reported-by: Justin Forbes <jmforbes@linuxtx.org>
Fixes: 712a951025c0 ("fuse: fix page stealing")
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/fuse/dev.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -851,17 +851,17 @@ static int fuse_try_move_page(struct fus
goto out_put_old;
}
+ get_page(newpage);
+
+ if (!(buf->flags & PIPE_BUF_FLAG_LRU))
+ lru_cache_add(newpage);
+
/*
* Release while we have extra ref on stolen page. Otherwise
* anon_pipe_buf_release() might think the page can be reused.
*/
pipe_buf_release(cs->pipe, buf);
- get_page(newpage);
-
- if (!(buf->flags & PIPE_BUF_FLAG_LRU))
- lru_cache_add(newpage);
-
err = 0;
spin_lock(&cs->req->waitq.lock);
if (test_bit(FR_ABORTED, &cs->req->flags))
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 026/121] xen: dont continue xenstore initialization in case of errors
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 025/121] fuse: release pipe buf after last use Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 027/121] xen: detect uninitialized xenbus in xenbus_init Greg Kroah-Hartman
` (103 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stable, jbeulich, Stefano Stabellini,
Boris Ostrovsky
From: Stefano Stabellini <stefano.stabellini@xilinx.com>
commit 08f6c2b09ebd4b326dbe96d13f94fee8f9814c78 upstream.
In case of errors in xenbus_init (e.g. missing xen_store_gfn parameter),
we goto out_error but we forget to reset xen_store_domain_type to
XS_UNKNOWN. As a consequence xenbus_probe_initcall and other initcalls
will still try to initialize xenstore resulting into a crash at boot.
[ 2.479830] Call trace:
[ 2.482314] xb_init_comms+0x18/0x150
[ 2.486354] xs_init+0x34/0x138
[ 2.489786] xenbus_probe+0x4c/0x70
[ 2.498432] xenbus_probe_initcall+0x2c/0x7c
[ 2.503944] do_one_initcall+0x54/0x1b8
[ 2.507358] kernel_init_freeable+0x1ac/0x210
[ 2.511617] kernel_init+0x28/0x130
[ 2.516112] ret_from_fork+0x10/0x20
Cc: <Stable@vger.kernel.org>
Cc: jbeulich@suse.com
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Link: https://lore.kernel.org/r/20211115222719.2558207-1-sstabellini@kernel.org
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/xen/xenbus/xenbus_probe.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -846,7 +846,7 @@ static struct notifier_block xenbus_resu
static int __init xenbus_init(void)
{
- int err = 0;
+ int err;
uint64_t v = 0;
xen_store_domain_type = XS_UNKNOWN;
@@ -920,8 +920,10 @@ static int __init xenbus_init(void)
*/
proc_create_mount_point("xen");
#endif
+ return 0;
out_error:
+ xen_store_domain_type = XS_UNKNOWN;
return err;
}
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 027/121] xen: detect uninitialized xenbus in xenbus_init
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 026/121] xen: dont continue xenstore initialization in case of errors Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 028/121] KVM: PPC: Book3S HV: Prevent POWER7/8 TLB flush flushing SLB Greg Kroah-Hartman
` (102 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stefano Stabellini, Juergen Gross,
Jan Beulich, Boris Ostrovsky
From: Stefano Stabellini <stefano.stabellini@xilinx.com>
commit 36e8f60f0867d3b70d398d653c17108459a04efe upstream.
If the xenstore page hasn't been allocated properly, reading the value
of the related hvm_param (HVM_PARAM_STORE_PFN) won't actually return
error. Instead, it will succeed and return zero. Instead of attempting
to xen_remap a bad guest physical address, detect this condition and
return early.
Note that although a guest physical address of zero for
HVM_PARAM_STORE_PFN is theoretically possible, it is not a good choice
and zero has never been validly used in that capacity.
Also recognize all bits set as an invalid value.
For 32-bit Linux, any pfn above ULONG_MAX would get truncated. Pfns
above ULONG_MAX should never be passed by the Xen tools to HVM guests
anyway, so check for this condition and return early.
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20211123210748.1910236-1-sstabellini@kernel.org
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/xen/xenbus/xenbus_probe.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -886,6 +886,29 @@ static int __init xenbus_init(void)
err = hvm_get_parameter(HVM_PARAM_STORE_PFN, &v);
if (err)
goto out_error;
+ /*
+ * Uninitialized hvm_params are zero and return no error.
+ * Although it is theoretically possible to have
+ * HVM_PARAM_STORE_PFN set to zero on purpose, in reality it is
+ * not zero when valid. If zero, it means that Xenstore hasn't
+ * been properly initialized. Instead of attempting to map a
+ * wrong guest physical address return error.
+ *
+ * Also recognize all bits set as an invalid value.
+ */
+ if (!v || !~v) {
+ err = -ENOENT;
+ goto out_error;
+ }
+ /* Avoid truncation on 32-bit. */
+#if BITS_PER_LONG == 32
+ if (v > ULONG_MAX) {
+ pr_err("%s: cannot handle HVM_PARAM_STORE_PFN=%llx > ULONG_MAX\n",
+ __func__, v);
+ err = -EINVAL;
+ goto out_error;
+ }
+#endif
xen_store_gfn = (unsigned long)v;
xen_store_interface =
xen_remap(xen_store_gfn << XEN_PAGE_SHIFT,
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 028/121] KVM: PPC: Book3S HV: Prevent POWER7/8 TLB flush flushing SLB
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 027/121] xen: detect uninitialized xenbus in xenbus_init Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 029/121] tracing/uprobe: Fix uprobe_perf_open probes iteration Greg Kroah-Hartman
` (101 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicholas Piggin, Fabiano Rosas,
Michael Ellerman
From: Nicholas Piggin <npiggin@gmail.com>
commit cf0b0e3712f7af90006f8317ff27278094c2c128 upstream.
The POWER9 ERAT flush instruction is a SLBIA with IH=7, which is a
reserved value on POWER7/8. On POWER8 this invalidates the SLB entries
above index 0, similarly to SLBIA IH=0.
If the SLB entries are invalidated, and then the guest is bypassed, the
host SLB does not get re-loaded, so the bolted entries above 0 will be
lost. This can result in kernel stack access causing a SLB fault.
Kernel stack access causing a SLB fault was responsible for the infamous
mega bug (search "Fix SLB reload bug"). Although since commit
48e7b7695745 ("powerpc/64s/hash: Convert SLB miss handlers to C") that
starts using the kernel stack in the SLB miss handler, it might only
result in an infinite loop of SLB faults. In any case it's a bug.
Fix this by only executing the instruction on >= POWER9 where IH=7 is
defined not to invalidate the SLB. POWER7/8 don't require this ERAT
flush.
Fixes: 500871125920 ("KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211119031627.577853-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/kvm/book3s_hv_builtin.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/arch/powerpc/kvm/book3s_hv_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_builtin.c
@@ -867,6 +867,7 @@ static void flush_guest_tlb(struct kvm *
"r" (0) : "memory");
}
asm volatile("ptesync": : :"memory");
+ // POWER9 congruence-class TLBIEL leaves ERAT. Flush it now.
asm volatile(PPC_RADIX_INVALIDATE_ERAT_GUEST : : :"memory");
} else {
for (set = 0; set < kvm->arch.tlb_sets; ++set) {
@@ -877,7 +878,9 @@ static void flush_guest_tlb(struct kvm *
rb += PPC_BIT(51); /* increment set number */
}
asm volatile("ptesync": : :"memory");
- asm volatile(PPC_ISA_3_0_INVALIDATE_ERAT : : :"memory");
+ // POWER9 congruence-class TLBIEL leaves ERAT. Flush it now.
+ if (cpu_has_feature(CPU_FTR_ARCH_300))
+ asm volatile(PPC_ISA_3_0_INVALIDATE_ERAT : : :"memory");
}
}
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 029/121] tracing/uprobe: Fix uprobe_perf_open probes iteration
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 028/121] KVM: PPC: Book3S HV: Prevent POWER7/8 TLB flush flushing SLB Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 030/121] tracing: Fix pid filtering when triggers are attached Greg Kroah-Hartman
` (100 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Masami Hiramatsu, Jiri Olsa,
Steven Rostedt (VMware)
From: Jiri Olsa <jolsa@redhat.com>
commit 1880ed71ce863318c1ce93bf324876fb5f92854f upstream.
Add missing 'tu' variable initialization in the probes loop,
otherwise the head 'tu' is used instead of added probes.
Link: https://lkml.kernel.org/r/20211123142801.182530-1-jolsa@kernel.org
Cc: stable@vger.kernel.org
Fixes: 99c9a923e97a ("tracing/uprobe: Fix double perf_event linking on multiprobe uprobe")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/trace_uprobe.c | 1 +
1 file changed, 1 insertion(+)
--- a/kernel/trace/trace_uprobe.c
+++ b/kernel/trace/trace_uprobe.c
@@ -1312,6 +1312,7 @@ static int uprobe_perf_open(struct trace
return 0;
list_for_each_entry(pos, trace_probe_probe_list(tp), list) {
+ tu = container_of(pos, struct trace_uprobe, tp);
err = uprobe_apply(tu->inode, tu->offset, &tu->consumer, true);
if (err) {
uprobe_perf_close(call, event);
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 030/121] tracing: Fix pid filtering when triggers are attached
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 029/121] tracing/uprobe: Fix uprobe_perf_open probes iteration Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 031/121] mmc: sdhci-esdhc-imx: disable CMDQ support Greg Kroah-Hartman
` (99 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Steven Rostedt (VMware)
From: Steven Rostedt (VMware) <rostedt@goodmis.org>
commit a55f224ff5f238013de8762c4287117e47b86e22 upstream.
If a event is filtered by pid and a trigger that requires processing of
the event to happen is a attached to the event, the discard portion does
not take the pid filtering into account, and the event will then be
recorded when it should not have been.
Cc: stable@vger.kernel.org
Fixes: 3fdaf80f4a836 ("tracing: Implement event pid filtering")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/trace.h | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -1506,14 +1506,26 @@ __event_trigger_test_discard(struct trac
if (eflags & EVENT_FILE_FL_TRIGGER_COND)
*tt = event_triggers_call(file, entry, event);
- if (test_bit(EVENT_FILE_FL_SOFT_DISABLED_BIT, &file->flags) ||
- (unlikely(file->flags & EVENT_FILE_FL_FILTERED) &&
- !filter_match_preds(file->filter, entry))) {
- __trace_event_discard_commit(buffer, event);
- return true;
- }
+ if (likely(!(file->flags & (EVENT_FILE_FL_SOFT_DISABLED |
+ EVENT_FILE_FL_FILTERED |
+ EVENT_FILE_FL_PID_FILTER))))
+ return false;
+
+ if (file->flags & EVENT_FILE_FL_SOFT_DISABLED)
+ goto discard;
+
+ if (file->flags & EVENT_FILE_FL_FILTERED &&
+ !filter_match_preds(file->filter, entry))
+ goto discard;
+
+ if ((file->flags & EVENT_FILE_FL_PID_FILTER) &&
+ trace_event_ignore_this_pid(file))
+ goto discard;
return false;
+ discard:
+ __trace_event_discard_commit(buffer, event);
+ return true;
}
/**
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 031/121] mmc: sdhci-esdhc-imx: disable CMDQ support
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 030/121] tracing: Fix pid filtering when triggers are attached Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 032/121] mmc: sdhci: Fix ADMA for PAGE_SIZE >= 64KiB Greg Kroah-Hartman
` (98 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tim Harvey, Haibo Chen,
Adrian Hunter, Ulf Hansson
From: Tim Harvey <tharvey@gateworks.com>
commit adab993c25191b839b415781bdc7173a77315240 upstream.
On IMX SoC's which support CMDQ the following can occur during high a
high cpu load:
mmc2: cqhci: ============ CQHCI REGISTER DUMP ===========
mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510
mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000
mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006
mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000
mmc2: cqhci: TDL base: 0x8003f000 | TDL up32: 0x00000000
mmc2: cqhci: Doorbell: 0xbf01dfff | TCN: 0x00000000
mmc2: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x08000000
mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000
mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000800
mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000
mmc2: cqhci: Resp idx: 0x0000000d | Resp arg: 0x00000000
mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc2: sdhci: Sys addr: 0x7c722000 | Version: 0x00000002
mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000020
mmc2: sdhci: Argument: 0x00018000 | Trn mode: 0x00000023
mmc2: sdhci: Present: 0x01f88008 | Host ctl: 0x00000030
mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080
mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f
mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000
mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000
mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502
mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407
mmc2: sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff
mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0xffc003ff
mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d07f01
mmc2: sdhci: Host ctl2: 0x00000088
mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0xfe179020
mmc2: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ====
mmc2: sdhci-esdhc-imx: cmd debug status: 0x2120
mmc2: sdhci-esdhc-imx: data debug status: 0x2200
mmc2: sdhci-esdhc-imx: trans debug status: 0x2300
mmc2: sdhci-esdhc-imx: dma debug status: 0x2400
mmc2: sdhci-esdhc-imx: adma debug status: 0x2510
mmc2: sdhci-esdhc-imx: fifo debug status: 0x2680
mmc2: sdhci-esdhc-imx: async fifo debug status: 0x2750
mmc2: sdhci: ============================================
For now, disable CMDQ support on the imx8qm/imx8qxp/imx8mm until the
issue is found and resolved.
Fixes: bb6e358169bf6 ("mmc: sdhci-esdhc-imx: add CMDQ support")
Fixes: cde5e8e9ff146 ("mmc: sdhci-esdhc-imx: Add an new esdhc_soc_data for i.MX8MM")
Cc: stable@vger.kernel.org
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20211103165415.2016-1-tharvey@gateworks.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -263,7 +263,6 @@ static struct esdhc_soc_data usdhc_imx8q
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
| ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
- | ESDHC_FLAG_CQHCI
| ESDHC_FLAG_STATE_LOST_IN_LPMODE
| ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME,
};
@@ -272,7 +271,6 @@ static struct esdhc_soc_data usdhc_imx8m
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
| ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
- | ESDHC_FLAG_CQHCI
| ESDHC_FLAG_STATE_LOST_IN_LPMODE,
};
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 032/121] mmc: sdhci: Fix ADMA for PAGE_SIZE >= 64KiB
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 031/121] mmc: sdhci-esdhc-imx: disable CMDQ support Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 033/121] mdio: aspeed: Fix "Link is Down" issue Greg Kroah-Hartman
` (97 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Adrian Hunter, Ulf Hansson, Bough Chen
From: Adrian Hunter <adrian.hunter@intel.com>
commit 3d7c194b7c9ad414264935ad4f943a6ce285ebb1 upstream.
The block layer forces a minimum segment size of PAGE_SIZE, so a segment
can be too big for the ADMA table, if PAGE_SIZE >= 64KiB. Fix by writing
multiple descriptors, noting that the ADMA table is sized for 4KiB chunks
anyway, so it will be big enough.
Reported-and-tested-by: Bough Chen <haibo.chen@nxp.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211115082345.802238-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mmc/host/sdhci.c | 21 ++++++++++++++++++---
drivers/mmc/host/sdhci.h | 4 +++-
2 files changed, 21 insertions(+), 4 deletions(-)
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -772,7 +772,19 @@ static void sdhci_adma_table_pre(struct
len -= offset;
}
- BUG_ON(len > 65536);
+ /*
+ * The block layer forces a minimum segment size of PAGE_SIZE,
+ * so 'len' can be too big here if PAGE_SIZE >= 64KiB. Write
+ * multiple descriptors, noting that the ADMA table is sized
+ * for 4KiB chunks anyway, so it will be big enough.
+ */
+ while (len > host->max_adma) {
+ int n = 32 * 1024; /* 32KiB*/
+
+ __sdhci_adma_write_desc(host, &desc, addr, n, ADMA2_TRAN_VALID);
+ addr += n;
+ len -= n;
+ }
/* tran, valid */
if (len)
@@ -3948,6 +3960,7 @@ struct sdhci_host *sdhci_alloc_host(stru
* descriptor for each segment, plus 1 for a nop end descriptor.
*/
host->adma_table_cnt = SDHCI_MAX_SEGS * 2 + 1;
+ host->max_adma = 65536;
return host;
}
@@ -4611,10 +4624,12 @@ int sdhci_setup_host(struct sdhci_host *
* be larger than 64 KiB though.
*/
if (host->flags & SDHCI_USE_ADMA) {
- if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC)
+ if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC) {
+ host->max_adma = 65532; /* 32-bit alignment */
mmc->max_seg_size = 65535;
- else
+ } else {
mmc->max_seg_size = 65536;
+ }
} else {
mmc->max_seg_size = mmc->max_req_size;
}
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -338,7 +338,8 @@ struct sdhci_adma2_64_desc {
/*
* Maximum segments assuming a 512KiB maximum requisition size and a minimum
- * 4KiB page size.
+ * 4KiB page size. Note this also allows enough for multiple descriptors in
+ * case of PAGE_SIZE >= 64KiB.
*/
#define SDHCI_MAX_SEGS 128
@@ -540,6 +541,7 @@ struct sdhci_host {
unsigned int blocks; /* remaining PIO blocks */
int sg_count; /* Mapped sg entries */
+ int max_adma; /* Max. length in ADMA descriptor */
void *adma_table; /* ADMA descriptor table */
void *align_buffer; /* Bounce buffer */
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 033/121] mdio: aspeed: Fix "Link is Down" issue
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 032/121] mmc: sdhci: Fix ADMA for PAGE_SIZE >= 64KiB Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 034/121] powerpc/32: Fix hardlockup on vmap stack overflow Greg Kroah-Hartman
` (96 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Joel Stanley, Dylan Hung,
Andrew Lunn, Russell King (Oracle),
Jakub Kicinski
From: Dylan Hung <dylan_hung@aspeedtech.com>
commit 9dbe33cf371bd70330858370bdbc35c7668f00c3 upstream.
The issue happened randomly in runtime. The message "Link is Down" is
popped but soon it recovered to "Link is Up".
The "Link is Down" results from the incorrect read data for reading the
PHY register via MDIO bus. The correct sequence for reading the data
shall be:
1. fire the command
2. wait for command done (this step was missing)
3. wait for data idle
4. read data from data register
Cc: stable@vger.kernel.org
Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20211125024432.15809-1-dylan_hung@aspeedtech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/mdio/mdio-aspeed.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/net/mdio/mdio-aspeed.c
+++ b/drivers/net/mdio/mdio-aspeed.c
@@ -61,6 +61,13 @@ static int aspeed_mdio_read(struct mii_b
iowrite32(ctrl, ctx->base + ASPEED_MDIO_CTRL);
+ rc = readl_poll_timeout(ctx->base + ASPEED_MDIO_CTRL, ctrl,
+ !(ctrl & ASPEED_MDIO_CTRL_FIRE),
+ ASPEED_MDIO_INTERVAL_US,
+ ASPEED_MDIO_TIMEOUT_US);
+ if (rc < 0)
+ return rc;
+
rc = readl_poll_timeout(ctx->base + ASPEED_MDIO_DATA, data,
data & ASPEED_MDIO_DATA_IDLE,
ASPEED_MDIO_INTERVAL_US,
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 034/121] powerpc/32: Fix hardlockup on vmap stack overflow
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 033/121] mdio: aspeed: Fix "Link is Down" issue Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 035/121] PCI: aardvark: Deduplicate code in advk_pcie_rd_conf() Greg Kroah-Hartman
` (95 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe Leroy, Michael Ellerman
From: Christophe Leroy <christophe.leroy@csgroup.eu>
commit 5bb60ea611db1e04814426ed4bd1c95d1487678e upstream.
Since the commit c118c7303ad5 ("powerpc/32: Fix vmap stack - Do not
activate MMU before reading task struct") a vmap stack overflow
results in a hard lockup. This is because emergency_ctx is still
addressed with its virtual address allthough data MMU is not active
anymore at that time.
Fix it by using a physical address instead.
Fixes: c118c7303ad5 ("powerpc/32: Fix vmap stack - Do not activate MMU before reading task struct")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ce30364fb7ccda489272af4a1612b6aa147e1d23.1637227521.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/kernel/head_32.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -333,11 +333,11 @@ label:
mfspr r1, SPRN_SPRG_THREAD
lwz r1, TASK_CPU - THREAD(r1)
slwi r1, r1, 3
- addis r1, r1, emergency_ctx@ha
+ addis r1, r1, emergency_ctx-PAGE_OFFSET@ha
#else
- lis r1, emergency_ctx@ha
+ lis r1, emergency_ctx-PAGE_OFFSET@ha
#endif
- lwz r1, emergency_ctx@l(r1)
+ lwz r1, emergency_ctx-PAGE_OFFSET@l(r1)
addi r1, r1, THREAD_SIZE - INT_FRAME_SIZE
EXCEPTION_PROLOG_2
SAVE_NVGPRS(r11)
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 035/121] PCI: aardvark: Deduplicate code in advk_pcie_rd_conf()
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 034/121] powerpc/32: Fix hardlockup on vmap stack overflow Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 036/121] PCI: aardvark: Update comment about disabling link training Greg Kroah-Hartman
` (94 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, Lorenzo Pieralisi
From: Marek Behún <kabel@kernel.org>
commit 67cb2a4c93499c2c22704998fd1fd2bc35194d8e upstream.
Avoid code repetition in advk_pcie_rd_conf() by handling errors with
goto jump, as is customary in kernel.
Link: https://lore.kernel.org/r/20211005180952.6812-9-kabel@kernel.org
Fixes: 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 48 ++++++++++++++--------------------
1 file changed, 20 insertions(+), 28 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1090,18 +1090,8 @@ static int advk_pcie_rd_conf(struct pci_
(le16_to_cpu(pcie->bridge.pcie_conf.rootctl) &
PCI_EXP_RTCTL_CRSSVE);
- if (advk_pcie_pio_is_running(pcie)) {
- /*
- * If it is possible return Completion Retry Status so caller
- * tries to issue the request again instead of failing.
- */
- if (allow_crs) {
- *val = CFG_RD_CRS_VAL;
- return PCIBIOS_SUCCESSFUL;
- }
- *val = 0xffffffff;
- return PCIBIOS_SET_FAILED;
- }
+ if (advk_pcie_pio_is_running(pcie))
+ goto try_crs;
/* Program the control register */
reg = advk_readl(pcie, PIO_CTRL);
@@ -1125,25 +1115,13 @@ static int advk_pcie_rd_conf(struct pci_
advk_writel(pcie, 1, PIO_START);
ret = advk_pcie_wait_pio(pcie);
- if (ret < 0) {
- /*
- * If it is possible return Completion Retry Status so caller
- * tries to issue the request again instead of failing.
- */
- if (allow_crs) {
- *val = CFG_RD_CRS_VAL;
- return PCIBIOS_SUCCESSFUL;
- }
- *val = 0xffffffff;
- return PCIBIOS_SET_FAILED;
- }
+ if (ret < 0)
+ goto try_crs;
/* Check PIO status and get the read result */
ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
- if (ret < 0) {
- *val = 0xffffffff;
- return PCIBIOS_SET_FAILED;
- }
+ if (ret < 0)
+ goto fail;
if (size == 1)
*val = (*val >> (8 * (where & 3))) & 0xff;
@@ -1151,6 +1129,20 @@ static int advk_pcie_rd_conf(struct pci_
*val = (*val >> (8 * (where & 3))) & 0xffff;
return PCIBIOS_SUCCESSFUL;
+
+try_crs:
+ /*
+ * If it is possible, return Completion Retry Status so that caller
+ * tries to issue the request again instead of failing.
+ */
+ if (allow_crs) {
+ *val = CFG_RD_CRS_VAL;
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+fail:
+ *val = 0xffffffff;
+ return PCIBIOS_SET_FAILED;
}
static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 036/121] PCI: aardvark: Update comment about disabling link training
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 035/121] PCI: aardvark: Deduplicate code in advk_pcie_rd_conf() Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 037/121] PCI: aardvark: Implement re-issuing config requests on CRS response Greg Kroah-Hartman
` (93 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Lorenzo Pieralisi,
Marek Behún
From: Pali Rohár <pali@kernel.org>
commit 1d1cd163d0de22a4041a6f1aeabcf78f80076539 upstream.
According to PCI Express Base Specifications (rev 4.0, 6.6.1
"Conventional reset"), after fundamental reset a 100ms delay is needed
prior to enabling link training.
Update comment in code to reflect this requirement.
Link: https://lore.kernel.org/r/20201202184659.3795-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -389,7 +389,14 @@ static void advk_pcie_issue_perst(struct
if (!pcie->reset_gpio)
return;
- /* PERST does not work for some cards when link training is enabled */
+ /*
+ * As required by PCI Express spec (PCI Express Base Specification, REV.
+ * 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset) a delay
+ * for at least 100ms after de-asserting PERST# signal is needed before
+ * link training is enabled. So ensure that link training is disabled
+ * prior de-asserting PERST# signal to fulfill that PCI Express spec
+ * requirement.
+ */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg &= ~LINK_TRAINING_EN;
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 037/121] PCI: aardvark: Implement re-issuing config requests on CRS response
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 036/121] PCI: aardvark: Update comment about disabling link training Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 038/121] PCI: aardvark: Simplify initialization of rootcap on virtual bridge Greg Kroah-Hartman
` (92 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Marek Behún,
Lorenzo Pieralisi
From: Pali Rohár <pali@kernel.org>
commit 223dec14a05337a4155f1deed46d2becce4d00fd upstream.
Commit 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value") fixed
handling of CRS response and when CRSSVE flag was not enabled it marked CRS
response as failed transaction (due to simplicity).
But pci-aardvark.c driver is already waiting up to the PIO_RETRY_CNT count
for PIO config response and so we can with a small change implement
re-issuing of config requests as described in PCIe base specification.
This change implements re-issuing of config requests when response is CRS.
Set upper bound of wait cycles to around PIO_RETRY_CNT, afterwards the
transaction is marked as failed and an all-ones value is returned as
before.
We do this by returning appropriate error codes from function
advk_pcie_check_pio_status(). On CRS we return -EAGAIN and caller then
reissues transaction.
Link: https://lore.kernel.org/r/20211005180952.6812-10-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 69 +++++++++++++++++++++-------------
1 file changed, 44 insertions(+), 25 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -699,6 +699,7 @@ static int advk_pcie_check_pio_status(st
u32 reg;
unsigned int status;
char *strcomp_status, *str_posted;
+ int ret;
reg = advk_readl(pcie, PIO_STAT);
status = (reg & PIO_COMPLETION_STATUS_MASK) >>
@@ -723,6 +724,7 @@ static int advk_pcie_check_pio_status(st
case PIO_COMPLETION_STATUS_OK:
if (reg & PIO_ERR_STATUS) {
strcomp_status = "COMP_ERR";
+ ret = -EFAULT;
break;
}
/* Get the read result */
@@ -730,9 +732,11 @@ static int advk_pcie_check_pio_status(st
*val = advk_readl(pcie, PIO_RD_DATA);
/* No error */
strcomp_status = NULL;
+ ret = 0;
break;
case PIO_COMPLETION_STATUS_UR:
strcomp_status = "UR";
+ ret = -EOPNOTSUPP;
break;
case PIO_COMPLETION_STATUS_CRS:
if (allow_crs && val) {
@@ -750,6 +754,7 @@ static int advk_pcie_check_pio_status(st
*/
*val = CFG_RD_CRS_VAL;
strcomp_status = NULL;
+ ret = 0;
break;
}
/* PCIe r4.0, sec 2.3.2, says:
@@ -765,21 +770,24 @@ static int advk_pcie_check_pio_status(st
* Request and taking appropriate action, e.g., complete the
* Request to the host as a failed transaction.
*
- * To simplify implementation do not re-issue the Configuration
- * Request and complete the Request as a failed transaction.
+ * So return -EAGAIN and caller (pci-aardvark.c driver) will
+ * re-issue request again up to the PIO_RETRY_CNT retries.
*/
strcomp_status = "CRS";
+ ret = -EAGAIN;
break;
case PIO_COMPLETION_STATUS_CA:
strcomp_status = "CA";
+ ret = -ECANCELED;
break;
default:
strcomp_status = "Unknown";
+ ret = -EINVAL;
break;
}
if (!strcomp_status)
- return 0;
+ return ret;
if (reg & PIO_NON_POSTED_REQ)
str_posted = "Non-posted";
@@ -789,7 +797,7 @@ static int advk_pcie_check_pio_status(st
dev_dbg(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
- return -EFAULT;
+ return ret;
}
static int advk_pcie_wait_pio(struct advk_pcie *pcie)
@@ -797,13 +805,13 @@ static int advk_pcie_wait_pio(struct adv
struct device *dev = &pcie->pdev->dev;
int i;
- for (i = 0; i < PIO_RETRY_CNT; i++) {
+ for (i = 1; i <= PIO_RETRY_CNT; i++) {
u32 start, isr;
start = advk_readl(pcie, PIO_START);
isr = advk_readl(pcie, PIO_ISR);
if (!start && isr)
- return 0;
+ return i;
udelay(PIO_RETRY_DELAY);
}
@@ -1075,6 +1083,7 @@ static int advk_pcie_rd_conf(struct pci_
int where, int size, u32 *val)
{
struct advk_pcie *pcie = bus->sysdata;
+ int retry_count;
bool allow_crs;
u32 reg;
int ret;
@@ -1117,16 +1126,22 @@ static int advk_pcie_rd_conf(struct pci_
/* Program the data strobe */
advk_writel(pcie, 0xf, PIO_WR_DATA_STRB);
- /* Clear PIO DONE ISR and start the transfer */
- advk_writel(pcie, 1, PIO_ISR);
- advk_writel(pcie, 1, PIO_START);
-
- ret = advk_pcie_wait_pio(pcie);
- if (ret < 0)
- goto try_crs;
+ retry_count = 0;
+ do {
+ /* Clear PIO DONE ISR and start the transfer */
+ advk_writel(pcie, 1, PIO_ISR);
+ advk_writel(pcie, 1, PIO_START);
+
+ ret = advk_pcie_wait_pio(pcie);
+ if (ret < 0)
+ goto try_crs;
+
+ retry_count += ret;
+
+ /* Check PIO status and get the read result */
+ ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
+ } while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
- /* Check PIO status and get the read result */
- ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
if (ret < 0)
goto fail;
@@ -1158,6 +1173,7 @@ static int advk_pcie_wr_conf(struct pci_
struct advk_pcie *pcie = bus->sysdata;
u32 reg;
u32 data_strobe = 0x0;
+ int retry_count;
int offset;
int ret;
@@ -1199,19 +1215,22 @@ static int advk_pcie_wr_conf(struct pci_
/* Program the data strobe */
advk_writel(pcie, data_strobe, PIO_WR_DATA_STRB);
- /* Clear PIO DONE ISR and start the transfer */
- advk_writel(pcie, 1, PIO_ISR);
- advk_writel(pcie, 1, PIO_START);
+ retry_count = 0;
+ do {
+ /* Clear PIO DONE ISR and start the transfer */
+ advk_writel(pcie, 1, PIO_ISR);
+ advk_writel(pcie, 1, PIO_START);
+
+ ret = advk_pcie_wait_pio(pcie);
+ if (ret < 0)
+ return PCIBIOS_SET_FAILED;
- ret = advk_pcie_wait_pio(pcie);
- if (ret < 0)
- return PCIBIOS_SET_FAILED;
+ retry_count += ret;
- ret = advk_pcie_check_pio_status(pcie, false, NULL);
- if (ret < 0)
- return PCIBIOS_SET_FAILED;
+ ret = advk_pcie_check_pio_status(pcie, false, NULL);
+ } while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
- return PCIBIOS_SUCCESSFUL;
+ return ret < 0 ? PCIBIOS_SET_FAILED : PCIBIOS_SUCCESSFUL;
}
static struct pci_ops advk_pcie_ops = {
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 038/121] PCI: aardvark: Simplify initialization of rootcap on virtual bridge
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 037/121] PCI: aardvark: Implement re-issuing config requests on CRS response Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 039/121] PCI: aardvark: Fix link training Greg Kroah-Hartman
` (91 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Marek Behún,
Lorenzo Pieralisi
From: Pali Rohár <pali@kernel.org>
commit 454c53271fc11f3aa5e44e41fd99ca181bd32c62 upstream.
PCIe config space can be initialized also before pci_bridge_emul_init()
call, so move rootcap initialization after PCI config space initialization.
This simplifies the function a little since it removes one if (ret < 0)
check.
Link: https://lore.kernel.org/r/20211005180952.6812-11-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -999,7 +999,6 @@ static struct pci_bridge_emul_ops advk_p
static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
{
struct pci_bridge_emul *bridge = &pcie->bridge;
- int ret;
bridge->conf.vendor =
cpu_to_le16(advk_readl(pcie, PCIE_CORE_DEV_ID_REG) & 0xffff);
@@ -1019,19 +1018,14 @@ static int advk_sw_pci_bridge_init(struc
/* Support interrupt A for MSI feature */
bridge->conf.intpin = PCIE_CORE_INT_A_ASSERT_ENABLE;
+ /* Indicates supports for Completion Retry Status */
+ bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
+
bridge->has_pcie = true;
bridge->data = pcie;
bridge->ops = &advk_pci_bridge_emul_ops;
- /* PCIe config space can be initialized after pci_bridge_emul_init() */
- ret = pci_bridge_emul_init(bridge, 0);
- if (ret < 0)
- return ret;
-
- /* Indicates supports for Completion Retry Status */
- bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
-
- return 0;
+ return pci_bridge_emul_init(bridge, 0);
}
static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 039/121] PCI: aardvark: Fix link training
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 038/121] PCI: aardvark: Simplify initialization of rootcap on virtual bridge Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 040/121] proc/vmcore: fix clearing user buffer by properly using clear_user() Greg Kroah-Hartman
` (90 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Marek Behún,
Lorenzo Pieralisi
From: Pali Rohár <pali@kernel.org>
commit f76b36d40beee0a13aa8f6aa011df0d7cbbb8a7f upstream.
Fix multiple link training issues in aardvark driver. The main reason of
these issues was misunderstanding of what certain registers do, since their
names and comments were misleading: before commit 96be36dbffac ("PCI:
aardvark: Replace custom macros by standard linux/pci_regs.h macros"), the
pci-aardvark.c driver used custom macros for accessing standard PCIe Root
Bridge registers, and misleading comments did not help to understand what
the code was really doing.
After doing more tests and experiments I've come to the conclusion that the
SPEED_GEN register in aardvark sets the PCIe revision / generation
compliance and forces maximal link speed. Both GEN3 and GEN2 values set the
read-only PCI_EXP_FLAGS_VERS bits (PCIe capabilities version of Root
Bridge) to value 2, while GEN1 value sets PCI_EXP_FLAGS_VERS to 1, which
matches with PCI Express specifications revisions 3, 2 and 1 respectively.
Changing SPEED_GEN also sets the read-only bits PCI_EXP_LNKCAP_SLS and
PCI_EXP_LNKCAP2_SLS to corresponding speed.
(Note that PCI Express rev 1 specification does not define PCI_EXP_LNKCAP2
and PCI_EXP_LNKCTL2 registers and when SPEED_GEN is set to GEN1 (which
also sets PCI_EXP_FLAGS_VERS set to 1), lspci cannot access
PCI_EXP_LNKCAP2 and PCI_EXP_LNKCTL2 registers.)
Changing PCIe link speed can be done via PCI_EXP_LNKCTL2_TLS bits of
PCI_EXP_LNKCTL2 register. Armada 3700 Functional Specifications says that
the default value of PCI_EXP_LNKCTL2_TLS is based on SPEED_GEN value, but
tests showed that the default value is always 8.0 GT/s, independently of
speed set by SPEED_GEN. So after setting SPEED_GEN, we must also set value
in PCI_EXP_LNKCTL2 register via PCI_EXP_LNKCTL2_TLS bits.
Triggering PCI_EXP_LNKCTL_RL bit immediately after setting LINK_TRAINING_EN
bit actually doesn't do anything. Tests have shown that a delay is needed
after enabling LINK_TRAINING_EN bit. As triggering PCI_EXP_LNKCTL_RL
currently does nothing, remove it.
Commit 43fc679ced18 ("PCI: aardvark: Improve link training") introduced
code which sets SPEED_GEN register based on negotiated link speed from
PCI_EXP_LNKSTA_CLS bits of PCI_EXP_LNKSTA register. This code was added to
fix detection of Compex WLE900VX (Atheros QCA9880) WiFi GEN1 PCIe cards, as
otherwise these cards were "invisible" on PCIe bus (probably because they
crashed). But apparently more people reported the same issues with these
cards also with other PCIe controllers [1] and I was able to reproduce this
issue also with other "noname" WiFi cards based on Atheros QCA9890 chip
(with the same PCI vendor/device ids as Atheros QCA9880). So this is not an
issue in aardvark but rather an issue in Atheros QCA98xx chips. Also, this
issue only exists if the kernel is compiled with PCIe ASPM support, and a
generic workaround for this is to change PCIe Bridge to 2.5 GT/s link speed
via PCI_EXP_LNKCTL2_TLS_2_5GT bits in PCI_EXP_LNKCTL2 register [2], before
triggering PCI_EXP_LNKCTL_RL bit. This workaround also works when SPEED_GEN
is set to value GEN2 (5 GT/s). So remove this hack completely in the
aardvark driver and always set SPEED_GEN to value from 'max-link-speed' DT
property. Fix for Atheros QCA98xx chips is handled separately by patch [2].
These two things (code for triggering PCI_EXP_LNKCTL_RL bit and changing
SPEED_GEN value) also explain why commit 6964494582f5 ("PCI: aardvark:
Train link immediately after enabling training") somehow fixed detection of
those problematic Compex cards with Atheros chips: if triggering link
retraining (via PCI_EXP_LNKCTL_RL bit) was done immediately after enabling
link training (via LINK_TRAINING_EN), it did nothing. If there was a
specific delay, aardvark HW already initialized PCIe link and therefore
triggering link retraining caused the above issue. Compex cards triggered
link down event and disappeared from the PCIe bus.
Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready before
training link") added 100ms sleep before calling 'Start link training'
command and explained that it is a requirement of PCI Express
specification. But the code after this 100ms sleep was not doing 'Start
link training', rather it triggered PCI_EXP_LNKCTL_RL bit via PCIe Root
Bridge to put link into Recovery state.
The required delay after fundamental reset is already done in function
advk_pcie_wait_for_link() which also checks whether PCIe link is up.
So after removing the code which triggers PCI_EXP_LNKCTL_RL bit on PCIe
Root Bridge, there is no need to wait 100ms again. Remove the extra
msleep() call and update comment about the delay required by the PCI
Express specification.
According to Marvell Armada 3700 Functional Specifications, Link training
should be enabled via aardvark register LINK_TRAINING_EN after selecting
PCIe generation and x1 lane. There is no need to disable it prior resetting
card via PERST# signal. This disabling code was introduced in commit
5169a9851daa ("PCI: aardvark: Issue PERST via GPIO") as a workaround for
some Atheros cards. It turns out that this also is Atheros specific issue
and affects any PCIe controller, not only aardvark. Moreover this Atheros
issue was triggered by juggling with PCI_EXP_LNKCTL_RL, LINK_TRAINING_EN
and SPEED_GEN bits interleaved with sleeps. Now, after removing triggering
PCI_EXP_LNKCTL_RL, there is no need to explicitly disable LINK_TRAINING_EN
bit. So remove this code too. The problematic Compex cards described in
previous git commits are correctly detected in advk_pcie_train_link()
function even after applying all these changes.
Note that with this patch, and also prior this patch, some NVMe disks which
support PCIe GEN3 with 8 GT/s speed are negotiated only at the lowest link
speed 2.5 GT/s, independently of SPEED_GEN value. After manually triggering
PCI_EXP_LNKCTL_RL bit (e.g. from userspace via setpci), these NVMe disks
change link speed to 5 GT/s when SPEED_GEN was configured to GEN2. This
issue first needs to be properly investigated. I will send a fix in the
future.
On the other hand, some other GEN2 PCIe cards with 5 GT/s speed are
autonomously by HW autonegotiated at full 5 GT/s speed without need of any
software interaction.
Armada 3700 Functional Specifications describes the following steps for
link training: set SPEED_GEN to GEN2, enable LINK_TRAINING_EN, poll until
link training is complete, trigger PCI_EXP_LNKCTL_RL, poll until signal
rate is 5 GT/s, poll until link training is complete, enable ASPM L0s.
The requirement for triggering PCI_EXP_LNKCTL_RL can be explained by the
need to achieve 5 GT/s speed (as changing link speed is done by throw to
recovery state entered by PCI_EXP_LNKCTL_RL) or maybe as a part of enabling
ASPM L0s (but in this case ASPM L0s should have been enabled prior
PCI_EXP_LNKCTL_RL).
It is unknown why the original pci-aardvark.c driver was triggering
PCI_EXP_LNKCTL_RL bit before waiting for the link to be up. This does not
align with neither PCIe base specifications nor with Armada 3700 Functional
Specification. (Note that in older versions of aardvark, this bit was
called incorrectly PCIE_CORE_LINK_TRAINING, so this may be the reason.)
It is also unknown why Armada 3700 Functional Specification says that it is
needed to trigger PCI_EXP_LNKCTL_RL for GEN2 mode, as according to PCIe
base specification 5 GT/s speed negotiation is supposed to be entirely
autonomous, even if initial speed is 2.5 GT/s.
[1] - https://lore.kernel.org/linux-pci/87h7l8axqp.fsf@toke.dk/
[2] - https://lore.kernel.org/linux-pci/20210326124326.21163-1-pali@kernel.org/
Link: https://lore.kernel.org/r/20211005180952.6812-12-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 119 ++++++++++------------------------
1 file changed, 35 insertions(+), 84 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -306,11 +306,6 @@ static inline u32 advk_readl(struct advk
return readl(pcie->base + reg);
}
-static inline u16 advk_read16(struct advk_pcie *pcie, u64 reg)
-{
- return advk_readl(pcie, (reg & ~0x3)) >> ((reg & 0x3) * 8);
-}
-
static u8 advk_pcie_ltssm_state(struct advk_pcie *pcie)
{
u32 val;
@@ -384,23 +379,9 @@ static void advk_pcie_wait_for_retrain(s
static void advk_pcie_issue_perst(struct advk_pcie *pcie)
{
- u32 reg;
-
if (!pcie->reset_gpio)
return;
- /*
- * As required by PCI Express spec (PCI Express Base Specification, REV.
- * 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset) a delay
- * for at least 100ms after de-asserting PERST# signal is needed before
- * link training is enabled. So ensure that link training is disabled
- * prior de-asserting PERST# signal to fulfill that PCI Express spec
- * requirement.
- */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg &= ~LINK_TRAINING_EN;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
/* 10ms delay is needed for some cards */
dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
gpiod_set_value_cansleep(pcie->reset_gpio, 1);
@@ -408,54 +389,47 @@ static void advk_pcie_issue_perst(struct
gpiod_set_value_cansleep(pcie->reset_gpio, 0);
}
-static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
+static void advk_pcie_train_link(struct advk_pcie *pcie)
{
- int ret, neg_gen;
+ struct device *dev = &pcie->pdev->dev;
u32 reg;
+ int ret;
- /* Setup link speed */
+ /*
+ * Setup PCIe rev / gen compliance based on device tree property
+ * 'max-link-speed' which also forces maximal link speed.
+ */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg &= ~PCIE_GEN_SEL_MSK;
- if (gen == 3)
+ if (pcie->link_gen == 3)
reg |= SPEED_GEN_3;
- else if (gen == 2)
+ else if (pcie->link_gen == 2)
reg |= SPEED_GEN_2;
else
reg |= SPEED_GEN_1;
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
/*
- * Enable link training. This is not needed in every call to this
- * function, just once suffices, but it does not break anything either.
- */
+ * Set maximal link speed value also into PCIe Link Control 2 register.
+ * Armada 3700 Functional Specification says that default value is based
+ * on SPEED_GEN but tests showed that default value is always 8.0 GT/s.
+ */
+ reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL2);
+ reg &= ~PCI_EXP_LNKCTL2_TLS;
+ if (pcie->link_gen == 3)
+ reg |= PCI_EXP_LNKCTL2_TLS_8_0GT;
+ else if (pcie->link_gen == 2)
+ reg |= PCI_EXP_LNKCTL2_TLS_5_0GT;
+ else
+ reg |= PCI_EXP_LNKCTL2_TLS_2_5GT;
+ advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL2);
+
+ /* Enable link training after selecting PCIe generation */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg |= LINK_TRAINING_EN;
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
/*
- * Start link training immediately after enabling it.
- * This solves problems for some buggy cards.
- */
- reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
- reg |= PCI_EXP_LNKCTL_RL;
- advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
-
- ret = advk_pcie_wait_for_link(pcie);
- if (ret)
- return ret;
-
- reg = advk_read16(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKSTA);
- neg_gen = reg & PCI_EXP_LNKSTA_CLS;
-
- return neg_gen;
-}
-
-static void advk_pcie_train_link(struct advk_pcie *pcie)
-{
- struct device *dev = &pcie->pdev->dev;
- int neg_gen = -1, gen;
-
- /*
* Reset PCIe card via PERST# signal. Some cards are not detected
* during link training when they are in some non-initial state.
*/
@@ -465,41 +439,18 @@ static void advk_pcie_train_link(struct
* PERST# signal could have been asserted by pinctrl subsystem before
* probe() callback has been called or issued explicitly by reset gpio
* function advk_pcie_issue_perst(), making the endpoint going into
- * fundamental reset. As required by PCI Express spec a delay for at
- * least 100ms after such a reset before link training is needed.
- */
- msleep(PCI_PM_D3COLD_WAIT);
-
- /*
- * Try link training at link gen specified by device tree property
- * 'max-link-speed'. If this fails, iteratively train at lower gen.
- */
- for (gen = pcie->link_gen; gen > 0; --gen) {
- neg_gen = advk_pcie_train_at_gen(pcie, gen);
- if (neg_gen > 0)
- break;
- }
-
- if (neg_gen < 0)
- goto err;
-
- /*
- * After successful training if negotiated gen is lower than requested,
- * train again on negotiated gen. This solves some stability issues for
- * some buggy gen1 cards.
+ * fundamental reset. As required by PCI Express spec (PCI Express
+ * Base Specification, REV. 4.0 PCI Express, February 19 2014, 6.6.1
+ * Conventional Reset) a delay for at least 100ms after such a reset
+ * before sending a Configuration Request to the device is needed.
+ * So wait until PCIe link is up. Function advk_pcie_wait_for_link()
+ * waits for link at least 900ms.
*/
- if (neg_gen < gen) {
- gen = neg_gen;
- neg_gen = advk_pcie_train_at_gen(pcie, gen);
- }
-
- if (neg_gen == gen) {
- dev_info(dev, "link up at gen %i\n", gen);
- return;
- }
-
-err:
- dev_err(dev, "link never came up\n");
+ ret = advk_pcie_wait_for_link(pcie);
+ if (ret < 0)
+ dev_err(dev, "link never came up\n");
+ else
+ dev_info(dev, "link up\n");
}
/*
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 040/121] proc/vmcore: fix clearing user buffer by properly using clear_user()
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 039/121] PCI: aardvark: Fix link training Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 041/121] netfilter: ctnetlink: fix filtering with CTA_TUPLE_REPLY Greg Kroah-Hartman
` (89 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Hildenbrand, Baoquan He,
Dave Young, Vivek Goyal, Philipp Rudo, Andrew Morton,
Linus Torvalds
From: David Hildenbrand <david@redhat.com>
commit c1e63117711977cc4295b2ce73de29dd17066c82 upstream.
To clear a user buffer we cannot simply use memset, we have to use
clear_user(). With a virtio-mem device that registers a vmcore_cb and
has some logically unplugged memory inside an added Linux memory block,
I can easily trigger a BUG by copying the vmcore via "cp":
systemd[1]: Starting Kdump Vmcore Save Service...
kdump[420]: Kdump is using the default log level(3).
kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
kdump[465]: saving vmcore-dmesg.txt complete
kdump[467]: saving vmcore
BUG: unable to handle page fault for address: 00007f2374e01000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867
Oops: 0003 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86
Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81
RSP: 0018:ffffc9000073be08 EFLAGS: 00010212
RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000
RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008
RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50
R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000
R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8
FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0
Call Trace:
read_vmcore+0x236/0x2c0
proc_reg_read+0x55/0xa0
vfs_read+0x95/0x190
ksys_read+0x4f/0xc0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access
Prevention (SMAP)", which is used to detect wrong access from the kernel
to user buffers like this: SMAP triggers a permissions violation on
wrong access. In the x86-64 variant of clear_user(), SMAP is properly
handled via clac()+stac().
To fix, properly use clear_user() when we're dealing with a user buffer.
Link: https://lkml.kernel.org/r/20211112092750.6921-1-david@redhat.com
Fixes: 997c136f518c ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/proc/vmcore.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -124,9 +124,13 @@ ssize_t read_from_oldmem(char *buf, size
nr_bytes = count;
/* If pfn is not ram, return zeros for sparse dump files */
- if (pfn_is_ram(pfn) == 0)
- memset(buf, 0, nr_bytes);
- else {
+ if (pfn_is_ram(pfn) == 0) {
+ tmp = 0;
+ if (!userbuf)
+ memset(buf, 0, nr_bytes);
+ else if (clear_user(buf, nr_bytes))
+ tmp = -EFAULT;
+ } else {
if (encrypted)
tmp = copy_oldmem_page_encrypted(pfn, buf,
nr_bytes,
@@ -135,10 +139,10 @@ ssize_t read_from_oldmem(char *buf, size
else
tmp = copy_oldmem_page(pfn, buf, nr_bytes,
offset, userbuf);
-
- if (tmp < 0)
- return tmp;
}
+ if (tmp < 0)
+ return tmp;
+
*ppos += nr_bytes;
count -= nr_bytes;
buf += nr_bytes;
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 041/121] netfilter: ctnetlink: fix filtering with CTA_TUPLE_REPLY
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 040/121] proc/vmcore: fix clearing user buffer by properly using clear_user() Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 042/121] netfilter: ctnetlink: do not erase error code with EINVAL Greg Kroah-Hartman
` (88 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florent Fourcot, Pablo Neira Ayuso,
Sasha Levin
From: Florent Fourcot <florent.fourcot@wifirst.fr>
[ Upstream commit ad81d4daf6a3f4769a346e635d5e1e967ca455d9 ]
filter->orig_flags was used for a reply context.
Fixes: cb8aa9a3affb ("netfilter: ctnetlink: add kernel side filtering for dump")
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_conntrack_netlink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index cb4cfa4f61a8d..39e0ff41688a7 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -973,7 +973,7 @@ ctnetlink_alloc_filter(const struct nlattr * const cda[], u8 family)
CTA_TUPLE_REPLY,
filter->family,
&filter->zone,
- filter->orig_flags);
+ filter->reply_flags);
if (err < 0) {
err = -EINVAL;
goto err_filter;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 042/121] netfilter: ctnetlink: do not erase error code with EINVAL
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 041/121] netfilter: ctnetlink: fix filtering with CTA_TUPLE_REPLY Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 043/121] netfilter: ipvs: Fix reuse connection if RS weight is 0 Greg Kroah-Hartman
` (87 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florent Fourcot, Pablo Neira Ayuso,
Sasha Levin
From: Florent Fourcot <florent.fourcot@wifirst.fr>
[ Upstream commit 77522ff02f333434612bd72df9b376f8d3836e4d ]
And be consistent in error management for both orig/reply filtering
Fixes: cb8aa9a3affb ("netfilter: ctnetlink: add kernel side filtering for dump")
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_conntrack_netlink.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 39e0ff41688a7..60a1a666e797a 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -974,10 +974,8 @@ ctnetlink_alloc_filter(const struct nlattr * const cda[], u8 family)
filter->family,
&filter->zone,
filter->reply_flags);
- if (err < 0) {
- err = -EINVAL;
+ if (err < 0)
goto err_filter;
- }
}
return filter;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 043/121] netfilter: ipvs: Fix reuse connection if RS weight is 0
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 042/121] netfilter: ctnetlink: do not erase error code with EINVAL Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 044/121] netfilter: flowtable: fix IPv6 tunnel addr match Greg Kroah-Hartman
` (86 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chuanqi Liu, yangxingwu,
Simon Horman, Julian Anastasov, Pablo Neira Ayuso, Sasha Levin
From: yangxingwu <xingwu.yang@gmail.com>
[ Upstream commit c95c07836fa4c1767ed11d8eca0769c652760e32 ]
We are changing expire_nodest_conn to work even for reused connections when
conn_reuse_mode=0, just as what was done with commit dc7b3eb900aa ("ipvs:
Fix reuse connection if real server is dead").
For controlled and persistent connections, the new connection will get the
needed real server depending on the rules in ip_vs_check_template().
Fixes: d752c3645717 ("ipvs: allow rescheduling of new connections when port reuse is detected")
Co-developed-by: Chuanqi Liu <legend050709@qq.com>
Signed-off-by: Chuanqi Liu <legend050709@qq.com>
Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/networking/ipvs-sysctl.rst | 3 +--
net/netfilter/ipvs/ip_vs_core.c | 8 ++++----
2 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/Documentation/networking/ipvs-sysctl.rst b/Documentation/networking/ipvs-sysctl.rst
index 2afccc63856ee..1cfbf1add2fc9 100644
--- a/Documentation/networking/ipvs-sysctl.rst
+++ b/Documentation/networking/ipvs-sysctl.rst
@@ -37,8 +37,7 @@ conn_reuse_mode - INTEGER
0: disable any special handling on port reuse. The new
connection will be delivered to the same real server that was
- servicing the previous connection. This will effectively
- disable expire_nodest_conn.
+ servicing the previous connection.
bit 1: enable rescheduling of new connections when it is safe.
That is, whenever expire_nodest_conn and for TCP sockets, when
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index c0b8215ab3d47..3a76da58d88bb 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -1976,7 +1976,6 @@ ip_vs_in(struct netns_ipvs *ipvs, unsigned int hooknum, struct sk_buff *skb, int
struct ip_vs_proto_data *pd;
struct ip_vs_conn *cp;
int ret, pkts;
- int conn_reuse_mode;
struct sock *sk;
/* Already marked as IPVS request or reply? */
@@ -2053,15 +2052,16 @@ ip_vs_in(struct netns_ipvs *ipvs, unsigned int hooknum, struct sk_buff *skb, int
cp = INDIRECT_CALL_1(pp->conn_in_get, ip_vs_conn_in_get_proto,
ipvs, af, skb, &iph);
- conn_reuse_mode = sysctl_conn_reuse_mode(ipvs);
- if (conn_reuse_mode && !iph.fragoffs && is_new_conn(skb, &iph) && cp) {
+ if (!iph.fragoffs && is_new_conn(skb, &iph) && cp) {
+ int conn_reuse_mode = sysctl_conn_reuse_mode(ipvs);
bool old_ct = false, resched = false;
if (unlikely(sysctl_expire_nodest_conn(ipvs)) && cp->dest &&
unlikely(!atomic_read(&cp->dest->weight))) {
resched = true;
old_ct = ip_vs_conn_uses_old_conntrack(cp, skb);
- } else if (is_new_conn_expected(cp, conn_reuse_mode)) {
+ } else if (conn_reuse_mode &&
+ is_new_conn_expected(cp, conn_reuse_mode)) {
old_ct = ip_vs_conn_uses_old_conntrack(cp, skb);
if (!atomic_read(&cp->n_control)) {
resched = true;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 044/121] netfilter: flowtable: fix IPv6 tunnel addr match
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 043/121] netfilter: ipvs: Fix reuse connection if RS weight is 0 Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 045/121] ARM: dts: BCM5301X: Fix I2C controller interrupt Greg Kroah-Hartman
` (85 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, wenxu, Will Mortensen,
Pablo Neira Ayuso, Sasha Levin
From: Will Mortensen <willmo@gmail.com>
[ Upstream commit 39f6eed4cb209643f3f8633291854ed7375d7264 ]
Previously the IPv6 addresses in the key were clobbered and the mask was
left unset.
I haven't tested this; I noticed it while skimming the code to
understand an unrelated issue.
Fixes: cfab6dbd0ecf ("netfilter: flowtable: add tunnel match offload support")
Cc: wenxu <wenxu@ucloud.cn>
Signed-off-by: Will Mortensen <willmo@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_flow_table_offload.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nf_flow_table_offload.c b/net/netfilter/nf_flow_table_offload.c
index a6b654b028dd4..d1862782be450 100644
--- a/net/netfilter/nf_flow_table_offload.c
+++ b/net/netfilter/nf_flow_table_offload.c
@@ -63,11 +63,11 @@ static void nf_flow_rule_lwt_match(struct nf_flow_match *match,
sizeof(struct in6_addr));
if (memcmp(&key->enc_ipv6.src, &in6addr_any,
sizeof(struct in6_addr)))
- memset(&key->enc_ipv6.src, 0xff,
+ memset(&mask->enc_ipv6.src, 0xff,
sizeof(struct in6_addr));
if (memcmp(&key->enc_ipv6.dst, &in6addr_any,
sizeof(struct in6_addr)))
- memset(&key->enc_ipv6.dst, 0xff,
+ memset(&mask->enc_ipv6.dst, 0xff,
sizeof(struct in6_addr));
enc_keys |= BIT(FLOW_DISSECTOR_KEY_ENC_IPV6_ADDRS);
key->enc_control.addr_type = FLOW_DISSECTOR_KEY_IPV6_ADDRS;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 045/121] ARM: dts: BCM5301X: Fix I2C controller interrupt
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 044/121] netfilter: flowtable: fix IPv6 tunnel addr match Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 046/121] ARM: dts: BCM5301X: Add interrupt properties to GPIO node Greg Kroah-Hartman
` (84 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christian Lamparter,
Florian Fainelli, Sasha Levin
From: Florian Fainelli <f.fainelli@gmail.com>
[ Upstream commit 754c4050a00e802e122690112fc2c3a6abafa7e2 ]
The I2C interrupt controller line is off by 32 because the datasheet
describes interrupt inputs into the GIC which are for Shared Peripheral
Interrupts and are starting at offset 32. The ARM GIC binding expects
the SPI interrupts to be numbered from 0 relative to the SPI base.
Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT")
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 72b0df6910bd5..e97a9c0904a98 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -408,7 +408,7 @@ uart2: serial@18008000 {
i2c0: i2c@18009000 {
compatible = "brcm,iproc-i2c";
reg = <0x18009000 0x50>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 046/121] ARM: dts: BCM5301X: Add interrupt properties to GPIO node
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 045/121] ARM: dts: BCM5301X: Fix I2C controller interrupt Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 047/121] ARM: dts: bcm2711: Fix PCIe interrupts Greg Kroah-Hartman
` (83 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Florian Fainelli, Sasha Levin
From: Florian Fainelli <f.fainelli@gmail.com>
[ Upstream commit 40f7342f0587639e5ad625adaa15efdd3cffb18f ]
The GPIO controller is also an interrupt controller provider and is
currently missing the appropriate 'interrupt-controller' and
'#interrupt-cells' properties to denote that.
Fixes: fb026d3de33b ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/bcm5301x.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index e97a9c0904a98..9fdad20c40d17 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -242,6 +242,8 @@ chipcommon: chipcommon@0 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
pcie0: pcie@12000 {
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 047/121] ARM: dts: bcm2711: Fix PCIe interrupts
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 046/121] ARM: dts: BCM5301X: Add interrupt properties to GPIO node Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 5.10 048/121] ASoC: qdsp6: q6routing: Conditionally reset FrontEnd Mixer Greg Kroah-Hartman
` (82 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jim Quinlan, Florian Fainelli, Sasha Levin
From: Florian Fainelli <f.fainelli@gmail.com>
[ Upstream commit 98481f3d72fb88cb5b973153434061015f094925 ]
The PCIe host bridge has two interrupt lines, one that goes towards it
PCIE_INTR2 second level interrupt controller and one for its MSI second
level interrupt controller. The first interrupt line is not currently
managed by the driver, which is why it was not a functional problem.
The interrupt-map property was also only listing the PCI_INTA interrupts
when there are also the INTB, C and D.
Reported-by: Jim Quinlan <jim2101024@gmail.com>
Fixes: d5c8dc0d4c88 ("ARM: dts: bcm2711: Enable PCIe controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/bcm2711.dtsi | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 398ecd7b9b68b..4ade854bdcdaf 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -480,11 +480,17 @@ pcie0: pcie@7d500000 {
#address-cells = <3>;
#interrupt-cells = <1>;
#size-cells = <2>;
- interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pcie", "msi";
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gicv2 GIC_SPI 144
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gicv2 GIC_SPI 145
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gicv2 GIC_SPI 146
IRQ_TYPE_LEVEL_HIGH>;
msi-controller;
msi-parent = <&pcie0>;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 048/121] ASoC: qdsp6: q6routing: Conditionally reset FrontEnd Mixer
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 047/121] ARM: dts: bcm2711: Fix PCIe interrupts Greg Kroah-Hartman
@ 2021-11-29 18:17 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 049/121] ASoC: qdsp6: q6asm: fix q6asm_dai_prepare error handling Greg Kroah-Hartman
` (81 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:17 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Srinivas Kandagatla, Mark Brown, Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit 861afeac7990587588d057b2c0b3222331c3da29 ]
Stream IDs are reused across multiple BackEnd mixers, do not reset the
stream mixers if they are not already set for that particular FrontEnd.
Ex:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below
command will reset previously setup MultiMedia1 stream, because both of them
are using MultiMedia1 PCM stream.
amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0
reset the FrontEnd Mixers conditionally to fix this issue.
This is more noticeable in desktop setup, where in alsactl tries to restore
the alsa state and overwriting the previous mixer settings.
Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114721.12517-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/qcom/qdsp6/q6routing.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c
index 0a6b9433f6acf..934b3f282bccd 100644
--- a/sound/soc/qcom/qdsp6/q6routing.c
+++ b/sound/soc/qcom/qdsp6/q6routing.c
@@ -491,7 +491,11 @@ static int msm_routing_put_audio_mixer(struct snd_kcontrol *kcontrol,
session->port_id = be_id;
snd_soc_dapm_mixer_update_power(dapm, kcontrol, 1, update);
} else {
- session->port_id = -1;
+ if (session->port_id == be_id) {
+ session->port_id = -1;
+ return 0;
+ }
+
snd_soc_dapm_mixer_update_power(dapm, kcontrol, 0, update);
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 049/121] ASoC: qdsp6: q6asm: fix q6asm_dai_prepare error handling
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2021-11-29 18:17 ` [PATCH 5.10 048/121] ASoC: qdsp6: q6routing: Conditionally reset FrontEnd Mixer Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 050/121] ASoC: topology: Add missing rwsem around snd_ctl_remove() calls Greg Kroah-Hartman
` (80 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Srinivas Kandagatla, Mark Brown, Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit 721a94b4352dc8e47bff90b549a0118c39776756 ]
Error handling in q6asm_dai_prepare() seems to be completely broken,
Fix this by handling it properly.
Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114721.12517-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/qcom/qdsp6/q6asm-dai.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c
index 9766725c29166..84cf190aa01a6 100644
--- a/sound/soc/qcom/qdsp6/q6asm-dai.c
+++ b/sound/soc/qcom/qdsp6/q6asm-dai.c
@@ -269,9 +269,7 @@ static int q6asm_dai_prepare(struct snd_soc_component *component,
if (ret < 0) {
dev_err(dev, "%s: q6asm_open_write failed\n", __func__);
- q6asm_audio_client_free(prtd->audio_client);
- prtd->audio_client = NULL;
- return -ENOMEM;
+ goto open_err;
}
prtd->session_id = q6asm_get_session_id(prtd->audio_client);
@@ -279,7 +277,7 @@ static int q6asm_dai_prepare(struct snd_soc_component *component,
prtd->session_id, substream->stream);
if (ret) {
dev_err(dev, "%s: stream reg failed ret:%d\n", __func__, ret);
- return ret;
+ goto routing_err;
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
@@ -301,10 +299,19 @@ static int q6asm_dai_prepare(struct snd_soc_component *component,
}
if (ret < 0)
dev_info(dev, "%s: CMD Format block failed\n", __func__);
+ else
+ prtd->state = Q6ASM_STREAM_RUNNING;
- prtd->state = Q6ASM_STREAM_RUNNING;
+ return ret;
- return 0;
+routing_err:
+ q6asm_cmd(prtd->audio_client, prtd->stream_id, CMD_CLOSE);
+open_err:
+ q6asm_unmap_memory_regions(substream->stream, prtd->audio_client);
+ q6asm_audio_client_free(prtd->audio_client);
+ prtd->audio_client = NULL;
+
+ return ret;
}
static int q6asm_dai_trigger(struct snd_soc_component *component,
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 050/121] ASoC: topology: Add missing rwsem around snd_ctl_remove() calls
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 049/121] ASoC: qdsp6: q6asm: fix q6asm_dai_prepare error handling Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 051/121] ASoC: codecs: wcd934x: return error code correctly from hw_params Greg Kroah-Hartman
` (79 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Takashi Iwai, Mark Brown, Sasha Levin
From: Takashi Iwai <tiwai@suse.de>
[ Upstream commit 7e567b5ae06315ef2d70666b149962e2bb4b97af ]
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: 8a9782346dcc ("ASoC: topology: Add topology core")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211116071812.18109-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/soc-topology.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 1030e11017b27..4d24ac255d253 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2873,6 +2873,7 @@ EXPORT_SYMBOL_GPL(snd_soc_tplg_widget_remove_all);
/* remove dynamic controls from the component driver */
int snd_soc_tplg_component_remove(struct snd_soc_component *comp, u32 index)
{
+ struct snd_card *card = comp->card->snd_card;
struct snd_soc_dobj *dobj, *next_dobj;
int pass = SOC_TPLG_PASS_END;
@@ -2880,6 +2881,7 @@ int snd_soc_tplg_component_remove(struct snd_soc_component *comp, u32 index)
while (pass >= SOC_TPLG_PASS_START) {
/* remove mixer controls */
+ down_write(&card->controls_rwsem);
list_for_each_entry_safe(dobj, next_dobj, &comp->dobj_list,
list) {
@@ -2923,6 +2925,7 @@ int snd_soc_tplg_component_remove(struct snd_soc_component *comp, u32 index)
break;
}
}
+ up_write(&card->controls_rwsem);
pass--;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 051/121] ASoC: codecs: wcd934x: return error code correctly from hw_params
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 050/121] ASoC: topology: Add missing rwsem around snd_ctl_remove() calls Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 052/121] net: ieee802154: handle iftypes as u32 Greg Kroah-Hartman
` (78 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Srinivas Kandagatla, Mark Brown, Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit 006ea27c4e7037369085755c7b5389effa508c04 ]
Error returned from wcd934x_slim_set_hw_params() are not passed to upper layer,
this could be misleading to the user which can start sending stream leading
to unnecessary errors.
Fix this by properly returning the errors.
Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114623.11891-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/wcd934x.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c
index d18ae5e3ee809..699b59cd389c0 100644
--- a/sound/soc/codecs/wcd934x.c
+++ b/sound/soc/codecs/wcd934x.c
@@ -1812,9 +1812,8 @@ static int wcd934x_hw_params(struct snd_pcm_substream *substream,
}
wcd->dai[dai->id].sconfig.rate = params_rate(params);
- wcd934x_slim_set_hw_params(wcd, &wcd->dai[dai->id], substream->stream);
- return 0;
+ return wcd934x_slim_set_hw_params(wcd, &wcd->dai[dai->id], substream->stream);
}
static int wcd934x_hw_free(struct snd_pcm_substream *substream,
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 052/121] net: ieee802154: handle iftypes as u32
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 051/121] ASoC: codecs: wcd934x: return error code correctly from hw_params Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 053/121] firmware: arm_scmi: pm: Propagate return value to caller Greg Kroah-Hartman
` (77 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Aring, Stefan Schmidt, Sasha Levin
From: Alexander Aring <aahringo@redhat.com>
[ Upstream commit 451dc48c806a7ce9fbec5e7a24ccf4b2c936e834 ]
This patch fixes an issue that an u32 netlink value is handled as a
signed enum value which doesn't fit into the range of u32 netlink type.
If it's handled as -1 value some BIT() evaluation ends in a
shift-out-of-bounds issue. To solve the issue we set the to u32 max which
is s32 "-1" value to keep backwards compatibility and let the followed enum
values start counting at 0. This brings the compiler to never handle the
enum as signed and a check if the value is above NL802154_IFTYPE_MAX should
filter -1 out.
Fixes: f3ea5e44231a ("ieee802154: add new interface command")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20211112030916.685793-1-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/nl802154.h | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/include/net/nl802154.h b/include/net/nl802154.h
index ddcee128f5d9a..145acb8f25095 100644
--- a/include/net/nl802154.h
+++ b/include/net/nl802154.h
@@ -19,6 +19,8 @@
*
*/
+#include <linux/types.h>
+
#define NL802154_GENL_NAME "nl802154"
enum nl802154_commands {
@@ -150,10 +152,9 @@ enum nl802154_attrs {
};
enum nl802154_iftype {
- /* for backwards compatibility TODO */
- NL802154_IFTYPE_UNSPEC = -1,
+ NL802154_IFTYPE_UNSPEC = (~(__u32)0),
- NL802154_IFTYPE_NODE,
+ NL802154_IFTYPE_NODE = 0,
NL802154_IFTYPE_MONITOR,
NL802154_IFTYPE_COORD,
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 053/121] firmware: arm_scmi: pm: Propagate return value to caller
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 052/121] net: ieee802154: handle iftypes as u32 Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 054/121] NFSv42: Dont fail clone() unless the OP_CLONE operation failed Greg Kroah-Hartman
` (76 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peng Fan, Sudeep Holla, Sasha Levin
From: Peng Fan <peng.fan@nxp.com>
[ Upstream commit 1446fc6c678e8d8b31606a4b877abe205f344b38 ]
of_genpd_add_provider_onecell may return error, so let's propagate
its return value to caller
Link: https://lore.kernel.org/r/20211116064227.20571-1-peng.fan@oss.nxp.com
Fixes: 898216c97ed2 ("firmware: arm_scmi: add device power domain support using genpd")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/arm_scmi/scmi_pm_domain.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/firmware/arm_scmi/scmi_pm_domain.c b/drivers/firmware/arm_scmi/scmi_pm_domain.c
index 9e44479f02842..a4e4aa9a35426 100644
--- a/drivers/firmware/arm_scmi/scmi_pm_domain.c
+++ b/drivers/firmware/arm_scmi/scmi_pm_domain.c
@@ -106,9 +106,7 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
scmi_pd_data->domains = domains;
scmi_pd_data->num_domains = num_domains;
- of_genpd_add_provider_onecell(np, scmi_pd_data);
-
- return 0;
+ return of_genpd_add_provider_onecell(np, scmi_pd_data);
}
static const struct scmi_device_id scmi_id_table[] = {
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 054/121] NFSv42: Dont fail clone() unless the OP_CLONE operation failed
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 053/121] firmware: arm_scmi: pm: Propagate return value to caller Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 055/121] ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE Greg Kroah-Hartman
` (75 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Trond Myklebust, Sasha Levin
From: Trond Myklebust <trond.myklebust@hammerspace.com>
[ Upstream commit d3c45824ad65aebf765fcf51366d317a29538820 ]
The failure to retrieve post-op attributes has no bearing on whether or
not the clone operation itself was successful. We must therefore ignore
the return value of decode_getfattr() when looking at the success or
failure of nfs4_xdr_dec_clone().
Fixes: 36022770de6c ("nfs42: add CLONE xdr functions")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/nfs42xdr.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/nfs/nfs42xdr.c b/fs/nfs/nfs42xdr.c
index c078f88552695..f2248d9d4db51 100644
--- a/fs/nfs/nfs42xdr.c
+++ b/fs/nfs/nfs42xdr.c
@@ -1396,8 +1396,7 @@ static int nfs4_xdr_dec_clone(struct rpc_rqst *rqstp,
status = decode_clone(xdr);
if (status)
goto out;
- status = decode_getfattr(xdr, res->dst_fattr, res->server);
-
+ decode_getfattr(xdr, res->dst_fattr, res->server);
out:
res->rpc_status = status;
return status;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 055/121] ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 054/121] NFSv42: Dont fail clone() unless the OP_CLONE operation failed Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 056/121] drm/nouveau/acr: fix a couple NULL vs IS_ERR() checks Greg Kroah-Hartman
` (74 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kees Cook, Takashi Iwai, Dinh Nguyen,
Sasha Levin
From: Takashi Iwai <tiwai@suse.de>
[ Upstream commit 187bea472600dcc8d2eb714335053264dd437172 ]
When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential
buffer overflow and panics. The code in sofcpga bootstrapping
contains the memcpy() calls are mistakenly translated as the shorter
size, hence it triggers a panic as if it were overflowing.
This patch changes the secondary_trampoline and *_end definitions
to arrays for avoiding the false-positive crash above.
Fixes: 9c4566a117a6 ("ARM: socfpga: Enable SMP for socfpga")
Suggested-by: Kees Cook <keescook@chromium.org>
Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473
Link: https://lore.kernel.org/r/20211117193244.31162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-socfpga/core.h | 2 +-
arch/arm/mach-socfpga/platsmp.c | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index fc2608b18a0d0..18f01190dcfd4 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -33,7 +33,7 @@ extern void __iomem *sdr_ctl_base_addr;
u32 socfpga_sdram_self_refresh(u32 sdr_base);
extern unsigned int socfpga_sdram_self_refresh_sz;
-extern char secondary_trampoline, secondary_trampoline_end;
+extern char secondary_trampoline[], secondary_trampoline_end[];
extern unsigned long socfpga_cpu1start_addr;
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
index fbb80b883e5dd..201191cf68f32 100644
--- a/arch/arm/mach-socfpga/platsmp.c
+++ b/arch/arm/mach-socfpga/platsmp.c
@@ -20,14 +20,14 @@
static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+ int trampoline_size = secondary_trampoline_end - secondary_trampoline;
if (socfpga_cpu1start_addr) {
/* This will put CPU #1 into reset. */
writel(RSTMGR_MPUMODRST_CPU1,
rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
- memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+ memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
writel(__pa_symbol(secondary_startup),
sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
@@ -45,12 +45,12 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+ int trampoline_size = secondary_trampoline_end - secondary_trampoline;
if (socfpga_cpu1start_addr) {
writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
SOCFPGA_A10_RSTMGR_MODMPURST);
- memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+ memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
writel(__pa_symbol(secondary_startup),
sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 056/121] drm/nouveau/acr: fix a couple NULL vs IS_ERR() checks
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 055/121] ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 057/121] scsi: mpt3sas: Fix kernel panic during drive powercycle test Greg Kroah-Hartman
` (73 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Ben Skeggs,
Karol Herbst, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit b371fd131fcec59f6165c80778bdc2cd1abd616b ]
The nvkm_acr_lsfw_add() function never returns NULL. It returns error
pointers on error.
Fixes: 22dcda45a3d1 ("drm/nouveau/acr: implement new subdev to replace "secure boot"")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118111314.GB1147@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/nouveau/nvkm/subdev/acr/gm200.c | 6 ++++--
drivers/gpu/drm/nouveau/nvkm/subdev/acr/gp102.c | 6 ++++--
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/acr/gm200.c b/drivers/gpu/drm/nouveau/nvkm/subdev/acr/gm200.c
index cd41b2e6cc879..18502fd6ebaa0 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/acr/gm200.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/acr/gm200.c
@@ -207,11 +207,13 @@ int
gm200_acr_wpr_parse(struct nvkm_acr *acr)
{
const struct wpr_header *hdr = (void *)acr->wpr_fw->data;
+ struct nvkm_acr_lsfw *lsfw;
while (hdr->falcon_id != WPR_HEADER_V0_FALCON_ID_INVALID) {
wpr_header_dump(&acr->subdev, hdr);
- if (!nvkm_acr_lsfw_add(NULL, acr, NULL, (hdr++)->falcon_id))
- return -ENOMEM;
+ lsfw = nvkm_acr_lsfw_add(NULL, acr, NULL, (hdr++)->falcon_id);
+ if (IS_ERR(lsfw))
+ return PTR_ERR(lsfw);
}
return 0;
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/acr/gp102.c b/drivers/gpu/drm/nouveau/nvkm/subdev/acr/gp102.c
index 80eb9d8dbc803..e5c8303a5b7b7 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/acr/gp102.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/acr/gp102.c
@@ -161,11 +161,13 @@ int
gp102_acr_wpr_parse(struct nvkm_acr *acr)
{
const struct wpr_header_v1 *hdr = (void *)acr->wpr_fw->data;
+ struct nvkm_acr_lsfw *lsfw;
while (hdr->falcon_id != WPR_HEADER_V1_FALCON_ID_INVALID) {
wpr_header_v1_dump(&acr->subdev, hdr);
- if (!nvkm_acr_lsfw_add(NULL, acr, NULL, (hdr++)->falcon_id))
- return -ENOMEM;
+ lsfw = nvkm_acr_lsfw_add(NULL, acr, NULL, (hdr++)->falcon_id);
+ if (IS_ERR(lsfw))
+ return PTR_ERR(lsfw);
}
return 0;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 057/121] scsi: mpt3sas: Fix kernel panic during drive powercycle test
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 056/121] drm/nouveau/acr: fix a couple NULL vs IS_ERR() checks Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 058/121] drm/vc4: fix error code in vc4_create_object() Greg Kroah-Hartman
` (72 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sreekanth Reddy, Martin K. Petersen,
Sasha Levin
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
[ Upstream commit 0ee4ba13e09c9d9c1cb6abb59da8295d9952328b ]
While looping over shost's sdev list it is possible that one
of the drives is getting removed and its sas_target object is
freed but its sdev object remains intact.
Consequently, a kernel panic can occur while the driver is trying to access
the sas_address field of sas_target object without also checking the
sas_target object for NULL.
Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com
Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 31c384108bc9c..8418b59b3743b 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3675,7 +3675,7 @@ _scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address)
shost_for_each_device(sdev, ioc->shost) {
sas_device_priv_data = sdev->hostdata;
- if (!sas_device_priv_data)
+ if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
continue;
if (sas_device_priv_data->sas_target->sas_address
!= sas_address)
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 058/121] drm/vc4: fix error code in vc4_create_object()
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 057/121] scsi: mpt3sas: Fix kernel panic during drive powercycle test Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 059/121] net: marvell: prestera: fix double free issue on err path Greg Kroah-Hartman
` (71 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Maxime Ripard, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 96c5f82ef0a145d3e56e5b26f2bf6dcd2ffeae1c ]
The ->gem_create_object() functions are supposed to return NULL if there
is an error. None of the callers expect error pointers so returing one
will lead to an Oops. See drm_gem_vram_create(), for example.
Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118111416.GC1147@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/vc4/vc4_bo.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vc4/vc4_bo.c b/drivers/gpu/drm/vc4/vc4_bo.c
index cc74a3f3a07af..9006b9861c90c 100644
--- a/drivers/gpu/drm/vc4/vc4_bo.c
+++ b/drivers/gpu/drm/vc4/vc4_bo.c
@@ -389,7 +389,7 @@ struct drm_gem_object *vc4_create_object(struct drm_device *dev, size_t size)
bo = kzalloc(sizeof(*bo), GFP_KERNEL);
if (!bo)
- return ERR_PTR(-ENOMEM);
+ return NULL;
bo->madv = VC4_MADV_WILLNEED;
refcount_set(&bo->usecnt, 0);
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 059/121] net: marvell: prestera: fix double free issue on err path
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 058/121] drm/vc4: fix error code in vc4_create_object() Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 060/121] iavf: Prevent changing static ITR values if adaptive moderation is on Greg Kroah-Hartman
` (70 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Volodymyr Mytnyk, David S. Miller,
Sasha Levin
From: Volodymyr Mytnyk <vmytnyk@marvell.com>
[ Upstream commit e8d032507cb7912baf1d3e0af54516f823befefd ]
fix error path handling in prestera_bridge_port_join() that
cases prestera driver to crash (see below).
Trace:
Internal error: Oops: 96000044 [#1] SMP
Modules linked in: prestera_pci prestera uio_pdrv_genirq
CPU: 1 PID: 881 Comm: ip Not tainted 5.15.0 #1
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : prestera_bridge_destroy+0x2c/0xb0 [prestera]
lr : prestera_bridge_port_join+0x2cc/0x350 [prestera]
sp : ffff800011a1b0f0
...
x2 : ffff000109ca6c80 x1 : dead000000000100 x0 : dead000000000122
Call trace:
prestera_bridge_destroy+0x2c/0xb0 [prestera]
prestera_bridge_port_join+0x2cc/0x350 [prestera]
prestera_netdev_port_event.constprop.0+0x3c4/0x450 [prestera]
prestera_netdev_event_handler+0xf4/0x110 [prestera]
raw_notifier_call_chain+0x54/0x80
call_netdevice_notifiers_info+0x54/0xa0
__netdev_upper_dev_link+0x19c/0x380
Fixes: e1189d9a5fbe ("net: marvell: prestera: Add Switchdev driver implementation")
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/marvell/prestera/prestera_switchdev.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/marvell/prestera/prestera_switchdev.c b/drivers/net/ethernet/marvell/prestera/prestera_switchdev.c
index 7d83e1f91ef17..9101d00e96b9d 100644
--- a/drivers/net/ethernet/marvell/prestera/prestera_switchdev.c
+++ b/drivers/net/ethernet/marvell/prestera/prestera_switchdev.c
@@ -439,8 +439,8 @@ static int prestera_port_bridge_join(struct prestera_port *port,
br_port = prestera_bridge_port_add(bridge, port->dev);
if (IS_ERR(br_port)) {
- err = PTR_ERR(br_port);
- goto err_brport_create;
+ prestera_bridge_put(bridge);
+ return PTR_ERR(br_port);
}
if (bridge->vlan_enabled)
@@ -454,8 +454,6 @@ static int prestera_port_bridge_join(struct prestera_port *port,
err_port_join:
prestera_bridge_port_put(br_port);
-err_brport_create:
- prestera_bridge_put(bridge);
return err;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 060/121] iavf: Prevent changing static ITR values if adaptive moderation is on
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 059/121] net: marvell: prestera: fix double free issue on err path Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 061/121] ALSA: intel-dsp-config: add quirk for JSL devices based on ES8336 codec Greg Kroah-Hartman
` (69 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nitesh B Venkatesh,
George Kuruvinakunnel, Tony Nguyen, Sasha Levin
From: Nitesh B Venkatesh <nitesh.b.venkatesh@intel.com>
[ Upstream commit e792779e6b639c182df91b46ac1e5803460b0b15 ]
Resolve being able to change static values on VF when adaptive interrupt
moderation is enabled.
This problem is fixed by checking the interrupt settings is not
a combination of change of static value while adaptive interrupt
moderation is turned on.
Without this fix, the user would be able to change static values
on VF with adaptive moderation enabled.
Fixes: 65e87c0398f5 ("i40evf: support queue-specific settings for interrupt moderation")
Signed-off-by: Nitesh B Venkatesh <nitesh.b.venkatesh@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/intel/iavf/iavf_ethtool.c | 30 ++++++++++++++++---
1 file changed, 26 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
index ea85b06857fa2..90f5ec982d513 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
@@ -719,12 +719,31 @@ static int iavf_get_per_queue_coalesce(struct net_device *netdev, u32 queue,
*
* Change the ITR settings for a specific queue.
**/
-static void iavf_set_itr_per_queue(struct iavf_adapter *adapter,
- struct ethtool_coalesce *ec, int queue)
+static int iavf_set_itr_per_queue(struct iavf_adapter *adapter,
+ struct ethtool_coalesce *ec, int queue)
{
struct iavf_ring *rx_ring = &adapter->rx_rings[queue];
struct iavf_ring *tx_ring = &adapter->tx_rings[queue];
struct iavf_q_vector *q_vector;
+ u16 itr_setting;
+
+ itr_setting = rx_ring->itr_setting & ~IAVF_ITR_DYNAMIC;
+
+ if (ec->rx_coalesce_usecs != itr_setting &&
+ ec->use_adaptive_rx_coalesce) {
+ netif_info(adapter, drv, adapter->netdev,
+ "Rx interrupt throttling cannot be changed if adaptive-rx is enabled\n");
+ return -EINVAL;
+ }
+
+ itr_setting = tx_ring->itr_setting & ~IAVF_ITR_DYNAMIC;
+
+ if (ec->tx_coalesce_usecs != itr_setting &&
+ ec->use_adaptive_tx_coalesce) {
+ netif_info(adapter, drv, adapter->netdev,
+ "Tx interrupt throttling cannot be changed if adaptive-tx is enabled\n");
+ return -EINVAL;
+ }
rx_ring->itr_setting = ITR_REG_ALIGN(ec->rx_coalesce_usecs);
tx_ring->itr_setting = ITR_REG_ALIGN(ec->tx_coalesce_usecs);
@@ -747,6 +766,7 @@ static void iavf_set_itr_per_queue(struct iavf_adapter *adapter,
* the Tx and Rx ITR values based on the values we have entered
* into the q_vector, no need to write the values now.
*/
+ return 0;
}
/**
@@ -788,9 +808,11 @@ static int __iavf_set_coalesce(struct net_device *netdev,
*/
if (queue < 0) {
for (i = 0; i < adapter->num_active_queues; i++)
- iavf_set_itr_per_queue(adapter, ec, i);
+ if (iavf_set_itr_per_queue(adapter, ec, i))
+ return -EINVAL;
} else if (queue < adapter->num_active_queues) {
- iavf_set_itr_per_queue(adapter, ec, queue);
+ if (iavf_set_itr_per_queue(adapter, ec, queue))
+ return -EINVAL;
} else {
netif_info(adapter, drv, netdev, "Invalid queue value, queue range is 0 - %d\n",
adapter->num_active_queues - 1);
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 061/121] ALSA: intel-dsp-config: add quirk for JSL devices based on ES8336 codec
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 060/121] iavf: Prevent changing static ITR values if adaptive moderation is on Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 062/121] mptcp: fix delack timer Greg Kroah-Hartman
` (68 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pierre-Louis Bossart, Kai Vehmanen,
Bard Liao, Takashi Iwai, Sasha Levin
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[ Upstream commit fa9730b4f28b7bd183d28a0bf636ab7108de35d7 ]
These devices are based on an I2C/I2S device, we need to force the use
of the SOF driver otherwise the legacy HDaudio driver will be loaded -
only HDMI will be supported.
We previously added support for other Intel platforms but missed
JasperLake.
BugLink: https://github.com/thesofproject/linux/issues/3210
Fixes: 9d36ceab9415 ('ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027023254.24955-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/hda/intel-dsp-config.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c
index 6cdb3db7507b1..fc61571a3ac73 100644
--- a/sound/hda/intel-dsp-config.c
+++ b/sound/hda/intel-dsp-config.c
@@ -298,6 +298,15 @@ static const struct config_entry config_table[] = {
},
#endif
+/* JasperLake */
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_JASPERLAKE)
+ {
+ .flags = FLAG_SOF,
+ .device = 0x4dc8,
+ .codec_hid = "ESSX8336",
+ },
+#endif
+
/* Tigerlake */
#if IS_ENABLED(CONFIG_SND_SOC_SOF_TIGERLAKE)
{
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 062/121] mptcp: fix delack timer
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 061/121] ALSA: intel-dsp-config: add quirk for JSL devices based on ES8336 codec Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 063/121] firmware: smccc: Fix check for ARCH_SOC_ID not implemented Greg Kroah-Hartman
` (67 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paolo Abeni, Eric Dumazet,
David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit ee50e67ba0e17b1a1a8d76691d02eadf9e0f392c ]
To compute the rtx timeout schedule_3rdack_retransmission() does multiple
things in the wrong way: srtt_us is measured in usec/8 and the timeout
itself is an absolute value.
Fixes: ec3edaa7ca6ce02f ("mptcp: Add handling of outgoing MP_JOIN requests")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau>@linux.intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mptcp/options.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/mptcp/options.c b/net/mptcp/options.c
index ac0233c9cd349..64afe71e2129a 100644
--- a/net/mptcp/options.c
+++ b/net/mptcp/options.c
@@ -368,9 +368,10 @@ static void schedule_3rdack_retransmission(struct sock *sk)
/* reschedule with a timeout above RTT, as we must look only for drop */
if (tp->srtt_us)
- timeout = tp->srtt_us << 1;
+ timeout = usecs_to_jiffies(tp->srtt_us >> (3 - 1));
else
timeout = TCP_TIMEOUT_INIT;
+ timeout += jiffies;
WARN_ON_ONCE(icsk->icsk_ack.pending & ICSK_ACK_TIMER);
icsk->icsk_ack.pending |= ICSK_ACK_SCHED | ICSK_ACK_TIMER;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 063/121] firmware: smccc: Fix check for ARCH_SOC_ID not implemented
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 062/121] mptcp: fix delack timer Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 064/121] ipv6: fix typos in __ip6_finish_output() Greg Kroah-Hartman
` (66 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Kelley, Sudeep Holla,
Arnd Bergmann, Sasha Levin
From: Michael Kelley <mikelley@microsoft.com>
[ Upstream commit e95d8eaee21cd0d117d34125d4cdc97489c1ab82 ]
The ARCH_FEATURES function ID is a 32-bit SMC call, which returns
a 32-bit result per the SMCCC spec. Current code is doing a 64-bit
comparison against -1 (SMCCC_RET_NOT_SUPPORTED) to detect that the
feature is unimplemented. That check doesn't work in a Hyper-V VM,
where the upper 32-bits are zero as allowed by the spec.
Cast the result as an 'int' so the comparison works. The change also
makes the code consistent with other similar checks in this file.
Fixes: 821b67fa4639 ("firmware: smccc: Add ARCH_SOC_ID support")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/smccc/soc_id.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/firmware/smccc/soc_id.c b/drivers/firmware/smccc/soc_id.c
index 581aa5e9b0778..dd7c3d5e8b0bb 100644
--- a/drivers/firmware/smccc/soc_id.c
+++ b/drivers/firmware/smccc/soc_id.c
@@ -50,7 +50,7 @@ static int __init smccc_soc_init(void)
arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
ARM_SMCCC_ARCH_SOC_ID, &res);
- if (res.a0 == SMCCC_RET_NOT_SUPPORTED) {
+ if ((int)res.a0 == SMCCC_RET_NOT_SUPPORTED) {
pr_info("ARCH_SOC_ID not implemented, skipping ....\n");
return 0;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 064/121] ipv6: fix typos in __ip6_finish_output()
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 063/121] firmware: smccc: Fix check for ARCH_SOC_ID not implemented Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 065/121] nfp: checking parameter process for rx-usecs/tx-usecs is invalid Greg Kroah-Hartman
` (65 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Tobias Brunner,
Steffen Klassert, David Ahern, David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 19d36c5f294879949c9d6f57cb61d39cc4c48553 ]
We deal with IPv6 packets, so we need to use IP6CB(skb)->flags and
IP6SKB_REROUTED, instead of IPCB(skb)->flags and IPSKB_REROUTED
Found by code inspection, please double check that fixing this bug
does not surface other bugs.
Fixes: 09ee9dba9611 ("ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tobias Brunner <tobias@strongswan.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/ip6_output.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index c2f8e69d7d7a0..54cabf1c2ae15 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -193,7 +193,7 @@ static int __ip6_finish_output(struct net *net, struct sock *sk, struct sk_buff
#if defined(CONFIG_NETFILTER) && defined(CONFIG_XFRM)
/* Policy lookup after SNAT yielded a new policy */
if (skb_dst(skb)->xfrm) {
- IPCB(skb)->flags |= IPSKB_REROUTED;
+ IP6CB(skb)->flags |= IP6SKB_REROUTED;
return dst_output(net, sk, skb);
}
#endif
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 065/121] nfp: checking parameter process for rx-usecs/tx-usecs is invalid
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 064/121] ipv6: fix typos in __ip6_finish_output() Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 066/121] net: stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume Greg Kroah-Hartman
` (64 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Diana Wang, Simon Horman,
Jakub Kicinski, David S. Miller, Sasha Levin
From: Diana Wang <na.wang@corigine.com>
[ Upstream commit 3bd6b2a838ba6a3b86d41b077f570b1b61174def ]
Use nn->tlv_caps.me_freq_mhz instead of nn->me_freq_mhz to check whether
rx-usecs/tx-usecs is valid.
This is because nn->tlv_caps.me_freq_mhz represents the clock_freq (MHz) of
the flow processing cores (FPC) on the NIC. While nn->me_freq_mhz is not
be set.
Fixes: ce991ab6662a ("nfp: read ME frequency from vNIC ctrl memory")
Signed-off-by: Diana Wang <na.wang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/netronome/nfp/nfp_net.h | 3 ---
drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c | 2 +-
2 files changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net.h b/drivers/net/ethernet/netronome/nfp/nfp_net.h
index df5b748be068c..cc2ce452000a3 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_net.h
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net.h
@@ -557,7 +557,6 @@ struct nfp_net_dp {
* @exn_name: Name for Exception interrupt
* @shared_handler: Handler for shared interrupts
* @shared_name: Name for shared interrupt
- * @me_freq_mhz: ME clock_freq (MHz)
* @reconfig_lock: Protects @reconfig_posted, @reconfig_timer_active,
* @reconfig_sync_present and HW reconfiguration request
* regs/machinery from async requests (sync must take
@@ -640,8 +639,6 @@ struct nfp_net {
irq_handler_t shared_handler;
char shared_name[IFNAMSIZ + 8];
- u32 me_freq_mhz;
-
bool link_up;
spinlock_t link_status_lock;
diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
index c036a1d0f8de6..cd0c9623f7dd2 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
@@ -1347,7 +1347,7 @@ static int nfp_net_set_coalesce(struct net_device *netdev,
* ME timestamp ticks. There are 16 ME clock cycles for each timestamp
* count.
*/
- factor = nn->me_freq_mhz / 16;
+ factor = nn->tlv_caps.me_freq_mhz / 16;
/* Each pair of (usecs, max_frames) fields specifies that interrupts
* should be coalesced until
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 066/121] net: stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 065/121] nfp: checking parameter process for rx-usecs/tx-usecs is invalid Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 067/121] net: stmmac: retain PTP clock time during SIOCSHWTSTAMP ioctls Greg Kroah-Hartman
` (63 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Joakim Zhang, David S. Miller, Sasha Levin
From: Joakim Zhang <qiangqing.zhang@nxp.com>
[ Upstream commit 276aae377206d60b9b7b7df4586cd9f2a813f5d0 ]
commit 5f58591323bf ("net: stmmac: delete the eee_ctrl_timer after
napi disabled"), this patch tries to fix system hang caused by eee_ctrl_timer,
unfortunately, it only can resolve it for system reboot stress test. System
hang also can be reproduced easily during system suspend/resume stess test
when mount NFS on i.MX8MP EVK board.
In stmmac driver, eee feature is combined to phylink framework. When do
system suspend, phylink_stop() would queue delayed work, it invokes
stmmac_mac_link_down(), where to deactivate eee_ctrl_timer synchronizly.
In above commit, try to fix issue by deactivating eee_ctrl_timer obviously,
but it is not enough. Looking into eee_ctrl_timer expire callback
stmmac_eee_ctrl_timer(), it could enable hareware eee mode again. What is
unexpected is that LPI interrupt (MAC_Interrupt_Enable.LPIEN bit) is always
asserted. This interrupt has chance to be issued when LPI state entry/exit
from the MAC, and at that time, clock could have been already disabled.
The result is that system hang when driver try to touch register from
interrupt handler.
The reason why above commit can fix system hang issue in stmmac_release()
is that, deactivate eee_ctrl_timer not just after napi disabled, further
after irq freed.
In conclusion, hardware would generate LPI interrupt when clock has been
disabled during suspend or resume, since hardware is in eee mode and LPI
interrupt enabled.
Interrupts from MAC, MTL and DMA level are enabled and never been disabled
when system suspend, so postpone clocks management from suspend stage to
noirq suspend stage should be more safe.
Fixes: 5f58591323bf ("net: stmmac: delete the eee_ctrl_timer after napi disabled")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ------
.../ethernet/stmicro/stmmac/stmmac_platform.c | 44 +++++++++++++++++++
2 files changed, 44 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4a75e73f06bbd..b6a2bc020026a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -5238,7 +5238,6 @@ int stmmac_suspend(struct device *dev)
struct net_device *ndev = dev_get_drvdata(dev);
struct stmmac_priv *priv = netdev_priv(ndev);
u32 chan;
- int ret;
if (!ndev || !netif_running(ndev))
return 0;
@@ -5280,13 +5279,6 @@ int stmmac_suspend(struct device *dev)
stmmac_mac_set(priv, priv->ioaddr, false);
pinctrl_pm_select_sleep_state(priv->device);
- /* Disable clock in case of PWM is off */
- clk_disable_unprepare(priv->plat->clk_ptp_ref);
- ret = pm_runtime_force_suspend(dev);
- if (ret) {
- mutex_unlock(&priv->lock);
- return ret;
- }
}
mutex_unlock(&priv->lock);
@@ -5351,12 +5343,6 @@ int stmmac_resume(struct device *dev)
priv->irq_wake = 0;
} else {
pinctrl_pm_select_default_state(priv->device);
- /* enable the clk previously disabled */
- ret = pm_runtime_force_resume(dev);
- if (ret)
- return ret;
- if (priv->plat->clk_ptp_ref)
- clk_prepare_enable(priv->plat->clk_ptp_ref);
/* reset the phy so that it's ready */
if (priv->mii)
stmmac_mdio_reset(priv->mii);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 035f9aef4308f..5c9d29c42bac8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -9,6 +9,7 @@
*******************************************************************************/
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/of.h>
@@ -778,9 +779,52 @@ static int __maybe_unused stmmac_runtime_resume(struct device *dev)
return stmmac_bus_clks_config(priv, true);
}
+static int stmmac_pltfr_noirq_suspend(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int ret;
+
+ if (!netif_running(ndev))
+ return 0;
+
+ if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
+ /* Disable clock in case of PWM is off */
+ clk_disable_unprepare(priv->plat->clk_ptp_ref);
+
+ ret = pm_runtime_force_suspend(dev);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int stmmac_pltfr_noirq_resume(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int ret;
+
+ if (!netif_running(ndev))
+ return 0;
+
+ if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
+ /* enable the clk previously disabled */
+ ret = pm_runtime_force_resume(dev);
+ if (ret)
+ return ret;
+
+ clk_prepare_enable(priv->plat->clk_ptp_ref);
+ }
+
+ return 0;
+}
+
const struct dev_pm_ops stmmac_pltfr_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend, stmmac_pltfr_resume)
SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL)
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_noirq_suspend, stmmac_pltfr_noirq_resume)
};
EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops);
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 067/121] net: stmmac: retain PTP clock time during SIOCSHWTSTAMP ioctls
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 066/121] net: stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 068/121] net: ipv6: add fib6_nh_release_dsts stub Greg Kroah-Hartman
` (62 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Olbrich, Ahmad Fatoum,
Holger Assmann, Vladimir Oltean, David S. Miller, Sasha Levin
From: Holger Assmann <h.assmann@pengutronix.de>
[ Upstream commit a6da2bbb0005e6b4909472962c9d0af29e75dd06 ]
Currently, when user space emits SIOCSHWTSTAMP ioctl calls such as
enabling/disabling timestamping or changing filter settings, the driver
reads the current CLOCK_REALTIME value and programming this into the
NIC's hardware clock. This might be necessary during system
initialization, but at runtime, when the PTP clock has already been
synchronized to a grandmaster, a reset of the timestamp settings might
result in a clock jump. Furthermore, if the clock is also controlled by
phc2sys in automatic mode (where the UTC offset is queried from ptp4l),
that UTC-to-TAI offset (currently 37 seconds in 2021) would be
temporarily reset to 0, and it would take a long time for phc2sys to
readjust so that CLOCK_REALTIME and the PHC are apart by 37 seconds
again.
To address the issue, we introduce a new function called
stmmac_init_tstamp_counter(), which gets called during ndo_open().
It contains the code snippet moved from stmmac_hwtstamp_set() that
manages the time synchronization. Besides, the sub second increment
configuration is also moved here since the related values are hardware
dependent and runtime invariant.
Furthermore, the hardware clock must be kept running even when no time
stamping mode is selected in order to retain the synchronized time base.
That way, timestamping can be enabled again at any time only with the
need to compensate the clock's natural drifting.
As a side effect, this patch fixes the issue that ptp_clock_info::enable
can be called before SIOCSHWTSTAMP and the driver (which looks at
priv->systime_flags) was not prepared to handle that ordering.
Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Reported-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Holger Assmann <h.assmann@pengutronix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 +
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 125 +++++++++++-------
.../ethernet/stmicro/stmmac/stmmac_platform.c | 2 +-
3 files changed, 81 insertions(+), 47 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index a4ca283e02284..617c960cfb5a5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -258,6 +258,7 @@ int stmmac_mdio_register(struct net_device *ndev);
int stmmac_mdio_reset(struct mii_bus *mii);
void stmmac_set_ethtool_ops(struct net_device *netdev);
+int stmmac_init_tstamp_counter(struct stmmac_priv *priv, u32 systime_flags);
void stmmac_ptp_register(struct stmmac_priv *priv);
void stmmac_ptp_unregister(struct stmmac_priv *priv);
int stmmac_resume(struct device *dev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b6a2bc020026a..a8c5492cb39be 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -47,6 +47,13 @@
#include "dwxgmac2.h"
#include "hwif.h"
+/* As long as the interface is active, we keep the timestamping counter enabled
+ * with fine resolution and binary rollover. This avoid non-monotonic behavior
+ * (clock jumps) when changing timestamping settings at runtime.
+ */
+#define STMMAC_HWTS_ACTIVE (PTP_TCR_TSENA | PTP_TCR_TSCFUPDT | \
+ PTP_TCR_TSCTRLSSR)
+
#define STMMAC_ALIGN(x) ALIGN(ALIGN(x, SMP_CACHE_BYTES), 16)
#define TSO_MAX_BUFF_SIZE (SZ_16K - 1)
@@ -508,8 +515,6 @@ static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr)
{
struct stmmac_priv *priv = netdev_priv(dev);
struct hwtstamp_config config;
- struct timespec64 now;
- u64 temp = 0;
u32 ptp_v2 = 0;
u32 tstamp_all = 0;
u32 ptp_over_ipv4_udp = 0;
@@ -518,11 +523,6 @@ static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr)
u32 snap_type_sel = 0;
u32 ts_master_en = 0;
u32 ts_event_en = 0;
- u32 sec_inc = 0;
- u32 value = 0;
- bool xmac;
-
- xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
if (!(priv->dma_cap.time_stamp || priv->adv_ts)) {
netdev_alert(priv->dev, "No support for HW time stamping\n");
@@ -684,42 +684,17 @@ static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr)
priv->hwts_rx_en = ((config.rx_filter == HWTSTAMP_FILTER_NONE) ? 0 : 1);
priv->hwts_tx_en = config.tx_type == HWTSTAMP_TX_ON;
- if (!priv->hwts_tx_en && !priv->hwts_rx_en)
- stmmac_config_hw_tstamping(priv, priv->ptpaddr, 0);
- else {
- value = (PTP_TCR_TSENA | PTP_TCR_TSCFUPDT | PTP_TCR_TSCTRLSSR |
- tstamp_all | ptp_v2 | ptp_over_ethernet |
- ptp_over_ipv6_udp | ptp_over_ipv4_udp | ts_event_en |
- ts_master_en | snap_type_sel);
- stmmac_config_hw_tstamping(priv, priv->ptpaddr, value);
-
- /* program Sub Second Increment reg */
- stmmac_config_sub_second_increment(priv,
- priv->ptpaddr, priv->plat->clk_ptp_rate,
- xmac, &sec_inc);
- temp = div_u64(1000000000ULL, sec_inc);
-
- /* Store sub second increment and flags for later use */
- priv->sub_second_inc = sec_inc;
- priv->systime_flags = value;
-
- /* calculate default added value:
- * formula is :
- * addend = (2^32)/freq_div_ratio;
- * where, freq_div_ratio = 1e9ns/sec_inc
- */
- temp = (u64)(temp << 32);
- priv->default_addend = div_u64(temp, priv->plat->clk_ptp_rate);
- stmmac_config_addend(priv, priv->ptpaddr, priv->default_addend);
-
- /* initialize system time */
- ktime_get_real_ts64(&now);
+ priv->systime_flags = STMMAC_HWTS_ACTIVE;
- /* lower 32 bits of tv_sec are safe until y2106 */
- stmmac_init_systime(priv, priv->ptpaddr,
- (u32)now.tv_sec, now.tv_nsec);
+ if (priv->hwts_tx_en || priv->hwts_rx_en) {
+ priv->systime_flags |= tstamp_all | ptp_v2 |
+ ptp_over_ethernet | ptp_over_ipv6_udp |
+ ptp_over_ipv4_udp | ts_event_en |
+ ts_master_en | snap_type_sel;
}
+ stmmac_config_hw_tstamping(priv, priv->ptpaddr, priv->systime_flags);
+
memcpy(&priv->tstamp_config, &config, sizeof(config));
return copy_to_user(ifr->ifr_data, &config,
@@ -747,6 +722,66 @@ static int stmmac_hwtstamp_get(struct net_device *dev, struct ifreq *ifr)
sizeof(*config)) ? -EFAULT : 0;
}
+/**
+ * stmmac_init_tstamp_counter - init hardware timestamping counter
+ * @priv: driver private structure
+ * @systime_flags: timestamping flags
+ * Description:
+ * Initialize hardware counter for packet timestamping.
+ * This is valid as long as the interface is open and not suspended.
+ * Will be rerun after resuming from suspend, case in which the timestamping
+ * flags updated by stmmac_hwtstamp_set() also need to be restored.
+ */
+int stmmac_init_tstamp_counter(struct stmmac_priv *priv, u32 systime_flags)
+{
+ bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
+ struct timespec64 now;
+ u32 sec_inc = 0;
+ u64 temp = 0;
+ int ret;
+
+ if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
+ return -EOPNOTSUPP;
+
+ ret = clk_prepare_enable(priv->plat->clk_ptp_ref);
+ if (ret < 0) {
+ netdev_warn(priv->dev,
+ "failed to enable PTP reference clock: %pe\n",
+ ERR_PTR(ret));
+ return ret;
+ }
+
+ stmmac_config_hw_tstamping(priv, priv->ptpaddr, systime_flags);
+ priv->systime_flags = systime_flags;
+
+ /* program Sub Second Increment reg */
+ stmmac_config_sub_second_increment(priv, priv->ptpaddr,
+ priv->plat->clk_ptp_rate,
+ xmac, &sec_inc);
+ temp = div_u64(1000000000ULL, sec_inc);
+
+ /* Store sub second increment for later use */
+ priv->sub_second_inc = sec_inc;
+
+ /* calculate default added value:
+ * formula is :
+ * addend = (2^32)/freq_div_ratio;
+ * where, freq_div_ratio = 1e9ns/sec_inc
+ */
+ temp = (u64)(temp << 32);
+ priv->default_addend = div_u64(temp, priv->plat->clk_ptp_rate);
+ stmmac_config_addend(priv, priv->ptpaddr, priv->default_addend);
+
+ /* initialize system time */
+ ktime_get_real_ts64(&now);
+
+ /* lower 32 bits of tv_sec are safe until y2106 */
+ stmmac_init_systime(priv, priv->ptpaddr, (u32)now.tv_sec, now.tv_nsec);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(stmmac_init_tstamp_counter);
+
/**
* stmmac_init_ptp - init PTP
* @priv: driver private structure
@@ -757,9 +792,11 @@ static int stmmac_hwtstamp_get(struct net_device *dev, struct ifreq *ifr)
static int stmmac_init_ptp(struct stmmac_priv *priv)
{
bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
+ int ret;
- if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
- return -EOPNOTSUPP;
+ ret = stmmac_init_tstamp_counter(priv, STMMAC_HWTS_ACTIVE);
+ if (ret)
+ return ret;
priv->adv_ts = 0;
/* Check if adv_ts can be enabled for dwmac 4.x / xgmac core */
@@ -2721,10 +2758,6 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
stmmac_mmc_setup(priv);
if (init_ptp) {
- ret = clk_prepare_enable(priv->plat->clk_ptp_ref);
- if (ret < 0)
- netdev_warn(priv->dev, "failed to enable PTP reference clock: %d\n", ret);
-
ret = stmmac_init_ptp(priv);
if (ret == -EOPNOTSUPP)
netdev_warn(priv->dev, "PTP not supported by HW\n");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 5c9d29c42bac8..4387752b26d95 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -815,7 +815,7 @@ static int stmmac_pltfr_noirq_resume(struct device *dev)
if (ret)
return ret;
- clk_prepare_enable(priv->plat->clk_ptp_ref);
+ stmmac_init_tstamp_counter(priv, priv->systime_flags);
}
return 0;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 068/121] net: ipv6: add fib6_nh_release_dsts stub
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 067/121] net: stmmac: retain PTP clock time during SIOCSHWTSTAMP ioctls Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 069/121] net: nexthop: release IPv6 per-cpu dsts when replacing a nexthop group Greg Kroah-Hartman
` (61 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nikolay Aleksandrov, David S. Miller,
Sasha Levin
From: Nikolay Aleksandrov <nikolay@nvidia.com>
[ Upstream commit 8837cbbf854246f5f4d565f21e6baa945d37aded ]
We need a way to release a fib6_nh's per-cpu dsts when replacing
nexthops otherwise we can end up with stale per-cpu dsts which hold net
device references, so add a new IPv6 stub called fib6_nh_release_dsts.
It must be used after an RCU grace period, so no new dsts can be created
through a group's nexthop entry.
Similar to fib6_nh_release it shouldn't be used if fib6_nh_init has failed
so it doesn't need a dummy stub when IPv6 is not enabled.
Fixes: 7bf4796dd099 ("nexthops: add support for replace")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/ip6_fib.h | 1 +
include/net/ipv6_stubs.h | 1 +
net/ipv6/af_inet6.c | 1 +
net/ipv6/route.c | 19 +++++++++++++++++++
4 files changed, 22 insertions(+)
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index ac5ff3c3afb14..88bc66b8d02b0 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -491,6 +491,7 @@ int fib6_nh_init(struct net *net, struct fib6_nh *fib6_nh,
struct fib6_config *cfg, gfp_t gfp_flags,
struct netlink_ext_ack *extack);
void fib6_nh_release(struct fib6_nh *fib6_nh);
+void fib6_nh_release_dsts(struct fib6_nh *fib6_nh);
int call_fib6_entry_notifiers(struct net *net,
enum fib_event_type event_type,
diff --git a/include/net/ipv6_stubs.h b/include/net/ipv6_stubs.h
index 8fce558b5fea3..14a43111ffc6a 100644
--- a/include/net/ipv6_stubs.h
+++ b/include/net/ipv6_stubs.h
@@ -47,6 +47,7 @@ struct ipv6_stub {
struct fib6_config *cfg, gfp_t gfp_flags,
struct netlink_ext_ack *extack);
void (*fib6_nh_release)(struct fib6_nh *fib6_nh);
+ void (*fib6_nh_release_dsts)(struct fib6_nh *fib6_nh);
void (*fib6_update_sernum)(struct net *net, struct fib6_info *rt);
int (*ip6_del_rt)(struct net *net, struct fib6_info *rt, bool skip_notify);
void (*fib6_rt_update)(struct net *net, struct fib6_info *rt,
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index e648fbebb1670..090575346daf6 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -1016,6 +1016,7 @@ static const struct ipv6_stub ipv6_stub_impl = {
.ip6_mtu_from_fib6 = ip6_mtu_from_fib6,
.fib6_nh_init = fib6_nh_init,
.fib6_nh_release = fib6_nh_release,
+ .fib6_nh_release_dsts = fib6_nh_release_dsts,
.fib6_update_sernum = fib6_update_sernum_stub,
.fib6_rt_update = fib6_rt_update,
.ip6_del_rt = ip6_del_rt,
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index a68a7d7c07280..6fef0d7586bf6 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -3570,6 +3570,25 @@ void fib6_nh_release(struct fib6_nh *fib6_nh)
fib_nh_common_release(&fib6_nh->nh_common);
}
+void fib6_nh_release_dsts(struct fib6_nh *fib6_nh)
+{
+ int cpu;
+
+ if (!fib6_nh->rt6i_pcpu)
+ return;
+
+ for_each_possible_cpu(cpu) {
+ struct rt6_info *pcpu_rt, **ppcpu_rt;
+
+ ppcpu_rt = per_cpu_ptr(fib6_nh->rt6i_pcpu, cpu);
+ pcpu_rt = xchg(ppcpu_rt, NULL);
+ if (pcpu_rt) {
+ dst_dev_put(&pcpu_rt->dst);
+ dst_release(&pcpu_rt->dst);
+ }
+ }
+}
+
static struct fib6_info *ip6_route_info_create(struct fib6_config *cfg,
gfp_t gfp_flags,
struct netlink_ext_ack *extack)
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 069/121] net: nexthop: release IPv6 per-cpu dsts when replacing a nexthop group
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 068/121] net: ipv6: add fib6_nh_release_dsts stub Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 070/121] ice: fix vsi->txq_map sizing Greg Kroah-Hartman
` (60 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nikolay Aleksandrov, David S. Miller,
Sasha Levin
From: Nikolay Aleksandrov <nikolay@nvidia.com>
[ Upstream commit 1005f19b9357b81aa64e1decd08d6e332caaa284 ]
When replacing a nexthop group, we must release the IPv6 per-cpu dsts of
the removed nexthop entries after an RCU grace period because they
contain references to the nexthop's net device and to the fib6 info.
With specific series of events[1] we can reach net device refcount
imbalance which is unrecoverable. IPv4 is not affected because dsts
don't take a refcount on the route.
[1]
$ ip nexthop list
id 200 via 2002:db8::2 dev bridge.10 scope link onlink
id 201 via 2002:db8::3 dev bridge scope link onlink
id 203 group 201/200
$ ip -6 route
2001:db8::10 nhid 203 metric 1024 pref medium
nexthop via 2002:db8::3 dev bridge weight 1 onlink
nexthop via 2002:db8::2 dev bridge.10 weight 1 onlink
Create rt6_info through one of the multipath legs, e.g.:
$ taskset -a -c 1 ./pkt_inj 24 bridge.10 2001:db8::10
(pkt_inj is just a custom packet generator, nothing special)
Then remove that leg from the group by replace (let's assume it is id
200 in this case):
$ ip nexthop replace id 203 group 201
Now remove the IPv6 route:
$ ip -6 route del 2001:db8::10/128
The route won't be really deleted due to the stale rt6_info holding 1
refcnt in nexthop id 200.
At this point we have the following reference count dependency:
(deleted) IPv6 route holds 1 reference over nhid 203
nh 203 holds 1 ref over id 201
nh 200 holds 1 ref over the net device and the route due to the stale
rt6_info
Now to create circular dependency between nh 200 and the IPv6 route, and
also to get a reference over nh 200, restore nhid 200 in the group:
$ ip nexthop replace id 203 group 201/200
And now we have a permanent circular dependncy because nhid 203 holds a
reference over nh 200 and 201, but the route holds a ref over nh 203 and
is deleted.
To trigger the bug just delete the group (nhid 203):
$ ip nexthop del id 203
It won't really be deleted due to the IPv6 route dependency, and now we
have 2 unlinked and deleted objects that reference each other: the group
and the IPv6 route. Since the group drops the reference it holds over its
entries at free time (i.e. its own refcount needs to drop to 0) that will
never happen and we get a permanent ref on them, since one of the entries
holds a reference over the IPv6 route it will also never be released.
At this point the dependencies are:
(deleted, only unlinked) IPv6 route holds reference over group nh 203
(deleted, only unlinked) group nh 203 holds reference over nh 201 and 200
nh 200 holds 1 ref over the net device and the route due to the stale
rt6_info
This is the last point where it can be fixed by running traffic through
nh 200, and specifically through the same CPU so the rt6_info (dst) will
get released due to the IPv6 genid, that in turn will free the IPv6
route, which in turn will free the ref count over the group nh 203.
If nh 200 is deleted at this point, it will never be released due to the
ref from the unlinked group 203, it will only be unlinked:
$ ip nexthop del id 200
$ ip nexthop
$
Now we can never release that stale rt6_info, we have IPv6 route with ref
over group nh 203, group nh 203 with ref over nh 200 and 201, nh 200 with
rt6_info (dst) with ref over the net device and the IPv6 route. All of
these objects are only unlinked, and cannot be released, thus they can't
release their ref counts.
Message from syslogd@dev at Nov 19 14:04:10 ...
kernel:[73501.828730] unregister_netdevice: waiting for bridge.10 to become free. Usage count = 3
Message from syslogd@dev at Nov 19 14:04:20 ...
kernel:[73512.068811] unregister_netdevice: waiting for bridge.10 to become free. Usage count = 3
Fixes: 7bf4796dd099 ("nexthops: add support for replace")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/nexthop.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c
index 4dbc628f8c386..8bd3f5e3c0e7a 100644
--- a/net/ipv4/nexthop.c
+++ b/net/ipv4/nexthop.c
@@ -924,15 +924,36 @@ static void remove_nexthop(struct net *net, struct nexthop *nh,
/* if any FIB entries reference this nexthop, any dst entries
* need to be regenerated
*/
-static void nh_rt_cache_flush(struct net *net, struct nexthop *nh)
+static void nh_rt_cache_flush(struct net *net, struct nexthop *nh,
+ struct nexthop *replaced_nh)
{
struct fib6_info *f6i;
+ struct nh_group *nhg;
+ int i;
if (!list_empty(&nh->fi_list))
rt_cache_flush(net);
list_for_each_entry(f6i, &nh->f6i_list, nh_list)
ipv6_stub->fib6_update_sernum(net, f6i);
+
+ /* if an IPv6 group was replaced, we have to release all old
+ * dsts to make sure all refcounts are released
+ */
+ if (!replaced_nh->is_group)
+ return;
+
+ /* new dsts must use only the new nexthop group */
+ synchronize_net();
+
+ nhg = rtnl_dereference(replaced_nh->nh_grp);
+ for (i = 0; i < nhg->num_nh; i++) {
+ struct nh_grp_entry *nhge = &nhg->nh_entries[i];
+ struct nh_info *nhi = rtnl_dereference(nhge->nh->nh_info);
+
+ if (nhi->family == AF_INET6)
+ ipv6_stub->fib6_nh_release_dsts(&nhi->fib6_nh);
+ }
}
static int replace_nexthop_grp(struct net *net, struct nexthop *old,
@@ -1111,7 +1132,7 @@ static int replace_nexthop(struct net *net, struct nexthop *old,
err = replace_nexthop_single(net, old, new, extack);
if (!err) {
- nh_rt_cache_flush(net, old);
+ nh_rt_cache_flush(net, old, new);
__remove_nexthop(net, new, NULL);
nexthop_put(new);
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 070/121] ice: fix vsi->txq_map sizing
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 069/121] net: nexthop: release IPv6 per-cpu dsts when replacing a nexthop group Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 071/121] ice: avoid bpf_prog refcount underflow Greg Kroah-Hartman
` (59 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Lobakin,
Maciej Fijalkowski, Kiran Bhandare, Tony Nguyen, Sasha Levin
From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
[ Upstream commit 792b2086584f25d84081a526beee80d103c2a913 ]
The approach of having XDP queue per CPU regardless of user's setting
exposed a hidden bug that could occur in case when Rx queue count differ
from Tx queue count. Currently vsi->txq_map's size is equal to the
doubled vsi->alloc_txq, which is not correct due to the fact that XDP
rings were previously based on the Rx queue count. Below splat can be
seen when ethtool -L is used and XDP rings are configured:
[ 682.875339] BUG: kernel NULL pointer dereference, address: 000000000000000f
[ 682.883403] #PF: supervisor read access in kernel mode
[ 682.889345] #PF: error_code(0x0000) - not-present page
[ 682.895289] PGD 0 P4D 0
[ 682.898218] Oops: 0000 [#1] PREEMPT SMP PTI
[ 682.903055] CPU: 42 PID: 2878 Comm: ethtool Tainted: G OE 5.15.0-rc5+ #1
[ 682.912214] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016
[ 682.923380] RIP: 0010:devres_remove+0x44/0x130
[ 682.928527] Code: 49 89 f4 55 48 89 fd 4c 89 ff 53 48 83 ec 10 e8 92 b9 49 00 48 8b 9d a8 02 00 00 48 8d 8d a0 02 00 00 49 89 c2 48 39 cb 74 0f <4c> 3b 63 10 74 25 48 8b 5b 08 48 39 cb 75 f1 4c 89 ff 4c 89 d6 e8
[ 682.950237] RSP: 0018:ffffc90006a679f0 EFLAGS: 00010002
[ 682.956285] RAX: 0000000000000286 RBX: ffffffffffffffff RCX: ffff88908343a370
[ 682.964538] RDX: 0000000000000001 RSI: ffffffff81690d60 RDI: 0000000000000000
[ 682.972789] RBP: ffff88908343a0d0 R08: 0000000000000000 R09: 0000000000000000
[ 682.981040] R10: 0000000000000286 R11: 3fffffffffffffff R12: ffffffff81690d60
[ 682.989282] R13: ffffffff81690a00 R14: ffff8890819807a8 R15: ffff88908343a36c
[ 682.997535] FS: 00007f08c7bfa740(0000) GS:ffff88a03fd00000(0000) knlGS:0000000000000000
[ 683.006910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 683.013557] CR2: 000000000000000f CR3: 0000001080a66003 CR4: 00000000003706e0
[ 683.021819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 683.030075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 683.038336] Call Trace:
[ 683.041167] devm_kfree+0x33/0x50
[ 683.045004] ice_vsi_free_arrays+0x5e/0xc0 [ice]
[ 683.050380] ice_vsi_rebuild+0x4c8/0x750 [ice]
[ 683.055543] ice_vsi_recfg_qs+0x9a/0x110 [ice]
[ 683.060697] ice_set_channels+0x14f/0x290 [ice]
[ 683.065962] ethnl_set_channels+0x333/0x3f0
[ 683.070807] genl_family_rcv_msg_doit+0xea/0x150
[ 683.076152] genl_rcv_msg+0xde/0x1d0
[ 683.080289] ? channels_prepare_data+0x60/0x60
[ 683.085432] ? genl_get_cmd+0xd0/0xd0
[ 683.089667] netlink_rcv_skb+0x50/0xf0
[ 683.094006] genl_rcv+0x24/0x40
[ 683.097638] netlink_unicast+0x239/0x340
[ 683.102177] netlink_sendmsg+0x22e/0x470
[ 683.106717] sock_sendmsg+0x5e/0x60
[ 683.110756] __sys_sendto+0xee/0x150
[ 683.114894] ? handle_mm_fault+0xd0/0x2a0
[ 683.119535] ? do_user_addr_fault+0x1f3/0x690
[ 683.134173] __x64_sys_sendto+0x25/0x30
[ 683.148231] do_syscall_64+0x3b/0xc0
[ 683.161992] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix this by taking into account the value that num_possible_cpus()
yields in addition to vsi->alloc_txq instead of doubling the latter.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path")
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ice/ice_lib.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index dc944d605a741..52ac6cc08e83e 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -83,8 +83,13 @@ static int ice_vsi_alloc_arrays(struct ice_vsi *vsi)
if (!vsi->rx_rings)
goto err_rings;
- /* XDP will have vsi->alloc_txq Tx queues as well, so double the size */
- vsi->txq_map = devm_kcalloc(dev, (2 * vsi->alloc_txq),
+ /* txq_map needs to have enough space to track both Tx (stack) rings
+ * and XDP rings; at this point vsi->num_xdp_txq might not be set,
+ * so use num_possible_cpus() as we want to always provide XDP ring
+ * per CPU, regardless of queue count settings from user that might
+ * have come from ethtool's set_channels() callback;
+ */
+ vsi->txq_map = devm_kcalloc(dev, (vsi->alloc_txq + num_possible_cpus()),
sizeof(*vsi->txq_map), GFP_KERNEL);
if (!vsi->txq_map)
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 071/121] ice: avoid bpf_prog refcount underflow
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 070/121] ice: fix vsi->txq_map sizing Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 072/121] scsi: core: sysfs: Fix setting device state to SDEV_RUNNING Greg Kroah-Hartman
` (58 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Lobakin, Marta Plantykow,
Maciej Fijalkowski, Kiran Bhandare, Tony Nguyen, Sasha Levin
From: Marta Plantykow <marta.a.plantykow@intel.com>
[ Upstream commit f65ee535df775a13a1046c0a0b2d72db342f8a5b ]
Ice driver has the routines for managing XDP resources that are shared
between ndo_bpf op and VSI rebuild flow. The latter takes place for
example when user changes queue count on an interface via ethtool's
set_channels().
There is an issue around the bpf_prog refcounting when VSI is being
rebuilt - since ice_prepare_xdp_rings() is called with vsi->xdp_prog as
an argument that is used later on by ice_vsi_assign_bpf_prog(), same
bpf_prog pointers are swapped with each other. Then it is also
interpreted as an 'old_prog' which in turn causes us to call
bpf_prog_put on it that will decrement its refcount.
Below splat can be interpreted in a way that due to zero refcount of a
bpf_prog it is wiped out from the system while kernel still tries to
refer to it:
[ 481.069429] BUG: unable to handle page fault for address: ffffc9000640f038
[ 481.077390] #PF: supervisor read access in kernel mode
[ 481.083335] #PF: error_code(0x0000) - not-present page
[ 481.089276] PGD 100000067 P4D 100000067 PUD 1001cb067 PMD 106d2b067 PTE 0
[ 481.097141] Oops: 0000 [#1] PREEMPT SMP PTI
[ 481.101980] CPU: 12 PID: 3339 Comm: sudo Tainted: G OE 5.15.0-rc5+ #1
[ 481.110840] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016
[ 481.122021] RIP: 0010:dev_xdp_prog_id+0x25/0x40
[ 481.127265] Code: 80 00 00 00 00 0f 1f 44 00 00 89 f6 48 c1 e6 04 48 01 fe 48 8b 86 98 08 00 00 48 85 c0 74 13 48 8b 50 18 31 c0 48 85 d2 74 07 <48> 8b 42 38 8b 40 20 c3 48 8b 96 90 08 00 00 eb e8 66 2e 0f 1f 84
[ 481.148991] RSP: 0018:ffffc90007b63868 EFLAGS: 00010286
[ 481.155034] RAX: 0000000000000000 RBX: ffff889080824000 RCX: 0000000000000000
[ 481.163278] RDX: ffffc9000640f000 RSI: ffff889080824010 RDI: ffff889080824000
[ 481.171527] RBP: ffff888107af7d00 R08: 0000000000000000 R09: ffff88810db5f6e0
[ 481.179776] R10: 0000000000000000 R11: ffff8890885b9988 R12: ffff88810db5f4bc
[ 481.188026] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 481.196276] FS: 00007f5466d5bec0(0000) GS:ffff88903fb00000(0000) knlGS:0000000000000000
[ 481.205633] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 481.212279] CR2: ffffc9000640f038 CR3: 000000014429c006 CR4: 00000000003706e0
[ 481.220530] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 481.228771] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 481.237029] Call Trace:
[ 481.239856] rtnl_fill_ifinfo+0x768/0x12e0
[ 481.244602] rtnl_dump_ifinfo+0x525/0x650
[ 481.249246] ? __alloc_skb+0xa5/0x280
[ 481.253484] netlink_dump+0x168/0x3c0
[ 481.257725] netlink_recvmsg+0x21e/0x3e0
[ 481.262263] ____sys_recvmsg+0x87/0x170
[ 481.266707] ? __might_fault+0x20/0x30
[ 481.271046] ? _copy_from_user+0x66/0xa0
[ 481.275591] ? iovec_from_user+0xf6/0x1c0
[ 481.280226] ___sys_recvmsg+0x82/0x100
[ 481.284566] ? sock_sendmsg+0x5e/0x60
[ 481.288791] ? __sys_sendto+0xee/0x150
[ 481.293129] __sys_recvmsg+0x56/0xa0
[ 481.297267] do_syscall_64+0x3b/0xc0
[ 481.301395] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 481.307238] RIP: 0033:0x7f5466f39617
[ 481.311373] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb bd 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2f 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 481.342944] RSP: 002b:00007ffedc7f4308 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
[ 481.361783] RAX: ffffffffffffffda RBX: 00007ffedc7f5460 RCX: 00007f5466f39617
[ 481.380278] RDX: 0000000000000000 RSI: 00007ffedc7f5360 RDI: 0000000000000003
[ 481.398500] RBP: 00007ffedc7f53f0 R08: 0000000000000000 R09: 000055d556f04d50
[ 481.416463] R10: 0000000000000077 R11: 0000000000000246 R12: 00007ffedc7f5360
[ 481.434131] R13: 00007ffedc7f5350 R14: 00007ffedc7f5344 R15: 0000000000000e98
[ 481.451520] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mxm_wmi mei_me coretemp mei ipmi_si ipmi_msghandler wmi acpi_pad acpi_power_meter ip_tables x_tables autofs4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel ahci crypto_simd cryptd libahci lpc_ich [last unloaded: ice]
[ 481.528558] CR2: ffffc9000640f038
[ 481.542041] ---[ end trace d1f24c9ecf5b61c1 ]---
Fix this by only calling ice_vsi_assign_bpf_prog() inside
ice_prepare_xdp_rings() when current vsi->xdp_prog pointer is NULL.
This way set_channels() flow will not attempt to swap the vsi->xdp_prog
pointers with itself.
Also, sprinkle around some comments that provide a reasoning about
correlation between driver and kernel in terms of bpf_prog refcount.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Marta Plantykow <marta.a.plantykow@intel.com>
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ice/ice_main.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 5b67d24b2b5ed..746a5bd178d3b 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -2397,7 +2397,18 @@ int ice_prepare_xdp_rings(struct ice_vsi *vsi, struct bpf_prog *prog)
ice_stat_str(status));
goto clear_xdp_rings;
}
- ice_vsi_assign_bpf_prog(vsi, prog);
+
+ /* assign the prog only when it's not already present on VSI;
+ * this flow is a subject of both ethtool -L and ndo_bpf flows;
+ * VSI rebuild that happens under ethtool -L can expose us to
+ * the bpf_prog refcount issues as we would be swapping same
+ * bpf_prog pointers from vsi->xdp_prog and calling bpf_prog_put
+ * on it as it would be treated as an 'old_prog'; for ndo_bpf
+ * this is not harmful as dev_xdp_install bumps the refcount
+ * before calling the op exposed by the driver;
+ */
+ if (!ice_is_xdp_ena_vsi(vsi))
+ ice_vsi_assign_bpf_prog(vsi, prog);
return 0;
clear_xdp_rings:
@@ -2527,6 +2538,11 @@ ice_xdp_setup_prog(struct ice_vsi *vsi, struct bpf_prog *prog,
if (xdp_ring_err)
NL_SET_ERR_MSG_MOD(extack, "Freeing XDP Tx resources failed");
} else {
+ /* safe to call even when prog == vsi->xdp_prog as
+ * dev_xdp_install in net/core/dev.c incremented prog's
+ * refcount so corresponding bpf_prog_put won't cause
+ * underflow
+ */
ice_vsi_assign_bpf_prog(vsi, prog);
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 072/121] scsi: core: sysfs: Fix setting device state to SDEV_RUNNING
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 071/121] ice: avoid bpf_prog refcount underflow Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 073/121] scsi: scsi_debug: Zero clear zones at reset write pointer Greg Kroah-Hartman
` (57 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lee Duncan, Mike Christie,
Martin K. Petersen, Sasha Levin
From: Mike Christie <michael.christie@oracle.com>
[ Upstream commit eb97545d6264b341b06ba7603f52ff6c0b2af6ea ]
This fixes an issue added in commit 4edd8cd4e86d ("scsi: core: sysfs: Fix
hang when device state is set via sysfs") where if userspace is requesting
to set the device state to SDEV_RUNNING when the state is already
SDEV_RUNNING, we return -EINVAL instead of count. The commmit above set ret
to count for this case, when it should have set it to 0.
Link: https://lore.kernel.org/r/20211120164917.4924-1-michael.christie@oracle.com
Fixes: 4edd8cd4e86d ("scsi: core: sysfs: Fix hang when device state is set via sysfs")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_sysfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 8de67679a8782..42db9c52208e6 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -816,7 +816,7 @@ store_state_field(struct device *dev, struct device_attribute *attr,
mutex_lock(&sdev->state_mutex);
if (sdev->sdev_state == SDEV_RUNNING && state == SDEV_RUNNING) {
- ret = count;
+ ret = 0;
} else {
ret = scsi_device_set_state(sdev, state);
if (ret == 0 && state == SDEV_RUNNING)
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 073/121] scsi: scsi_debug: Zero clear zones at reset write pointer
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 072/121] scsi: core: sysfs: Fix setting device state to SDEV_RUNNING Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 074/121] erofs: fix deadlock when shrink erofs slab Greg Kroah-Hartman
` (56 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Damien Le Moal, Douglas Gilbert,
Shinichiro Kawasaki, Martin K. Petersen, Sasha Levin
From: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
[ Upstream commit 2d62253eb1b60f4ce8b39125eee282739b519297 ]
When a reset is requested the position of the write pointer is updated but
the data in the corresponding zone is not cleared. Instead scsi_debug
returns any data written before the write pointer was reset. This is an
error and prevents using scsi_debug for stale page cache testing of the
BLKRESETZONE ioctl.
Zero written data in the zone when resetting the write pointer.
Link: https://lore.kernel.org/r/20211122061223.298890-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_debug.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 3fc7c2a31c191..1a3f5adc68849 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -4628,6 +4628,7 @@ static void zbc_rwp_zone(struct sdebug_dev_info *devip,
struct sdeb_zone_state *zsp)
{
enum sdebug_z_cond zc;
+ struct sdeb_store_info *sip = devip2sip(devip, false);
if (zbc_zone_is_conv(zsp))
return;
@@ -4639,6 +4640,10 @@ static void zbc_rwp_zone(struct sdebug_dev_info *devip,
if (zsp->z_cond == ZC4_CLOSED)
devip->nr_closed--;
+ if (zsp->z_wp > zsp->z_start)
+ memset(sip->storep + zsp->z_start * sdebug_sector_size, 0,
+ (zsp->z_wp - zsp->z_start) * sdebug_sector_size);
+
zsp->z_non_seq_resource = false;
zsp->z_wp = zsp->z_start;
zsp->z_cond = ZC1_EMPTY;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 074/121] erofs: fix deadlock when shrink erofs slab
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 073/121] scsi: scsi_debug: Zero clear zones at reset write pointer Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 075/121] net/smc: Ensure the active closing peer first closes clcsock Greg Kroah-Hartman
` (55 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chao Yu, Gao Xiang, Huang Jianan,
Jianhua Hao, Gao Xiang, Sasha Levin
From: Huang Jianan <huangjianan@oppo.com>
[ Upstream commit 57bbeacdbee72a54eb97d56b876cf9c94059fc34 ]
We observed the following deadlock in the stress test under low
memory scenario:
Thread A Thread B
- erofs_shrink_scan
- erofs_try_to_release_workgroup
- erofs_workgroup_try_to_freeze -- A
- z_erofs_do_read_page
- z_erofs_collection_begin
- z_erofs_register_collection
- erofs_insert_workgroup
- xa_lock(&sbi->managed_pslots) -- B
- erofs_workgroup_get
- erofs_wait_on_workgroup_freezed -- A
- xa_erase
- xa_lock(&sbi->managed_pslots) -- B
To fix this, it needs to hold xa_lock before freezing the workgroup
since xarray will be touched then. So let's hold the lock before
accessing each workgroup, just like what we did with the radix tree
before.
[ Gao Xiang: Jianhua Hao also reports this issue at
https://lore.kernel.org/r/b10b85df30694bac8aadfe43537c897a@xiaomi.com ]
Link: https://lore.kernel.org/r/20211118135844.3559-1-huangjianan@oppo.com
Fixes: 64094a04414f ("erofs: convert workstn to XArray")
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Reported-by: Jianhua Hao <haojianhua1@xiaomi.com>
Signed-off-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/erofs/utils.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/fs/erofs/utils.c b/fs/erofs/utils.c
index de9986d2f82fd..5c11199d753a6 100644
--- a/fs/erofs/utils.c
+++ b/fs/erofs/utils.c
@@ -154,7 +154,7 @@ static bool erofs_try_to_release_workgroup(struct erofs_sb_info *sbi,
* however in order to avoid some race conditions, add a
* DBG_BUGON to observe this in advance.
*/
- DBG_BUGON(xa_erase(&sbi->managed_pslots, grp->index) != grp);
+ DBG_BUGON(__xa_erase(&sbi->managed_pslots, grp->index) != grp);
/* last refcount should be connected with its managed pslot. */
erofs_workgroup_unfreeze(grp, 0);
@@ -169,15 +169,19 @@ static unsigned long erofs_shrink_workstation(struct erofs_sb_info *sbi,
unsigned int freed = 0;
unsigned long index;
+ xa_lock(&sbi->managed_pslots);
xa_for_each(&sbi->managed_pslots, index, grp) {
/* try to shrink each valid workgroup */
if (!erofs_try_to_release_workgroup(sbi, grp))
continue;
+ xa_unlock(&sbi->managed_pslots);
++freed;
if (!--nr_shrink)
- break;
+ return freed;
+ xa_lock(&sbi->managed_pslots);
}
+ xa_unlock(&sbi->managed_pslots);
return freed;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 075/121] net/smc: Ensure the active closing peer first closes clcsock
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 074/121] erofs: fix deadlock when shrink erofs slab Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 076/121] mlxsw: Verify the accessed index doesnt exceed the array length Greg Kroah-Hartman
` (54 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tony Lu, Wen Gu, David S. Miller,
Sasha Levin
From: Tony Lu <tonylu@linux.alibaba.com>
[ Upstream commit 606a63c9783a32a45bd2ef0eee393711d75b3284 ]
The side that actively closed socket, it's clcsock doesn't enter
TIME_WAIT state, but the passive side does it. It should show the same
behavior as TCP sockets.
Consider this, when client actively closes the socket, the clcsock in
server enters TIME_WAIT state, which means the address is occupied and
won't be reused before TIME_WAIT dismissing. If we restarted server, the
service would be unavailable for a long time.
To solve this issue, shutdown the clcsock in [A], perform the TCP active
close progress first, before the passive closed side closing it. So that
the actively closed side enters TIME_WAIT, not the passive one.
Client | Server
close() // client actively close |
smc_release() |
smc_close_active() // PEERCLOSEWAIT1 |
smc_close_final() // abort or closed = 1|
smc_cdc_get_slot_and_msg_send() |
[A] |
|smc_cdc_msg_recv_action() // ACTIVE
| queue_work(smc_close_wq, &conn->close_work)
| smc_close_passive_work() // PROCESSABORT or APPCLOSEWAIT1
| smc_close_passive_abort_received() // only in abort
|
|close() // server recv zero, close
| smc_release() // PROCESSABORT or APPCLOSEWAIT1
| smc_close_active()
| smc_close_abort() or smc_close_final() // CLOSED
| smc_cdc_get_slot_and_msg_send() // abort or closed = 1
smc_cdc_msg_recv_action() | smc_clcsock_release()
queue_work(smc_close_wq, &conn->close_work) | sock_release(tcp) // actively close clc, enter TIME_WAIT
smc_close_passive_work() // PEERCLOSEWAIT1 | smc_conn_free()
smc_close_passive_abort_received() // CLOSED|
smc_conn_free() |
smc_clcsock_release() |
sock_release(tcp) // passive close clc |
Link: https://www.spinics.net/lists/netdev/msg780407.html
Fixes: b38d732477e4 ("smc: socket closing and linkgroup cleanup")
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/smc/smc_close.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/smc/smc_close.c b/net/smc/smc_close.c
index 0f9ffba07d268..04620b53b74a7 100644
--- a/net/smc/smc_close.c
+++ b/net/smc/smc_close.c
@@ -228,6 +228,12 @@ int smc_close_active(struct smc_sock *smc)
/* send close request */
rc = smc_close_final(conn);
sk->sk_state = SMC_PEERCLOSEWAIT1;
+
+ /* actively shutdown clcsock before peer close it,
+ * prevent peer from entering TIME_WAIT state.
+ */
+ if (smc->clcsock && smc->clcsock->sk)
+ rc = kernel_sock_shutdown(smc->clcsock, SHUT_RDWR);
} else {
/* peer event has changed the state */
goto again;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 076/121] mlxsw: Verify the accessed index doesnt exceed the array length
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 075/121] net/smc: Ensure the active closing peer first closes clcsock Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 077/121] mlxsw: spectrum: Protect driver from buggy firmware Greg Kroah-Hartman
` (53 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Danielle Ratson, Ido Schimmel,
David S. Miller, Sasha Levin
From: Danielle Ratson <danieller@nvidia.com>
[ Upstream commit 837ec05cfea08284c575e8e834777b107da5ff9d ]
There are few cases in which an array index queried from a fw register,
is accessed without any validation that it doesn't exceed the array
length.
Add a proper length validation, so accessing memory past the end of an
array will be forbidden.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlxsw/minimal.c | 4 ++++
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 5 +++++
drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c | 3 +++
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 3 +++
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 4 ++++
5 files changed, 19 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/minimal.c b/drivers/net/ethernet/mellanox/mlxsw/minimal.c
index c010db2c9dba9..443dc44452ef8 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/minimal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/minimal.c
@@ -234,6 +234,7 @@ static void mlxsw_m_port_remove(struct mlxsw_m *mlxsw_m, u8 local_port)
static int mlxsw_m_port_module_map(struct mlxsw_m *mlxsw_m, u8 local_port,
u8 *last_module)
{
+ unsigned int max_ports = mlxsw_core_max_ports(mlxsw_m->core);
u8 module, width;
int err;
@@ -249,6 +250,9 @@ static int mlxsw_m_port_module_map(struct mlxsw_m *mlxsw_m, u8 local_port,
if (module == *last_module)
return 0;
*last_module = module;
+
+ if (WARN_ON_ONCE(module >= max_ports))
+ return -EINVAL;
mlxsw_m->module_to_port[module] = ++mlxsw_m->max_ports;
return 0;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index b08853f71b2be..1a9978f501ba9 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2052,9 +2052,14 @@ static void mlxsw_sp_pude_event_func(const struct mlxsw_reg_info *reg,
struct mlxsw_sp *mlxsw_sp = priv;
struct mlxsw_sp_port *mlxsw_sp_port;
enum mlxsw_reg_pude_oper_status status;
+ unsigned int max_ports;
u8 local_port;
+ max_ports = mlxsw_core_max_ports(mlxsw_sp->core);
local_port = mlxsw_reg_pude_local_port_get(pude_pl);
+
+ if (WARN_ON_ONCE(local_port >= max_ports))
+ return;
mlxsw_sp_port = mlxsw_sp->ports[local_port];
if (!mlxsw_sp_port)
return;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
index ca8090a28dec6..50eca2daad843 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
@@ -568,10 +568,13 @@ void mlxsw_sp1_ptp_got_timestamp(struct mlxsw_sp *mlxsw_sp, bool ingress,
u8 domain_number, u16 sequence_id,
u64 timestamp)
{
+ unsigned int max_ports = mlxsw_core_max_ports(mlxsw_sp->core);
struct mlxsw_sp_port *mlxsw_sp_port;
struct mlxsw_sp1_ptp_key key;
u8 types;
+ if (WARN_ON_ONCE(local_port >= max_ports))
+ return;
mlxsw_sp_port = mlxsw_sp->ports[local_port];
if (!mlxsw_sp_port)
return;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
index 4381f8c6c3fb7..53128382fc2e0 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
@@ -2177,6 +2177,7 @@ static void mlxsw_sp_router_neigh_ent_ipv4_process(struct mlxsw_sp *mlxsw_sp,
char *rauhtd_pl,
int ent_index)
{
+ u64 max_rifs = MLXSW_CORE_RES_GET(mlxsw_sp->core, MAX_RIFS);
struct net_device *dev;
struct neighbour *n;
__be32 dipn;
@@ -2185,6 +2186,8 @@ static void mlxsw_sp_router_neigh_ent_ipv4_process(struct mlxsw_sp *mlxsw_sp,
mlxsw_reg_rauhtd_ent_ipv4_unpack(rauhtd_pl, ent_index, &rif, &dip);
+ if (WARN_ON_ONCE(rif >= max_rifs))
+ return;
if (!mlxsw_sp->router->rifs[rif]) {
dev_err_ratelimited(mlxsw_sp->bus_info->dev, "Incorrect RIF in neighbour entry\n");
return;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index 6501ce94ace58..368fa0e5ad315 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -2410,6 +2410,7 @@ static void mlxsw_sp_fdb_notify_mac_process(struct mlxsw_sp *mlxsw_sp,
char *sfn_pl, int rec_index,
bool adding)
{
+ unsigned int max_ports = mlxsw_core_max_ports(mlxsw_sp->core);
struct mlxsw_sp_port_vlan *mlxsw_sp_port_vlan;
struct mlxsw_sp_bridge_device *bridge_device;
struct mlxsw_sp_bridge_port *bridge_port;
@@ -2422,6 +2423,9 @@ static void mlxsw_sp_fdb_notify_mac_process(struct mlxsw_sp *mlxsw_sp,
int err;
mlxsw_reg_sfn_mac_unpack(sfn_pl, rec_index, mac, &fid, &local_port);
+
+ if (WARN_ON_ONCE(local_port >= max_ports))
+ return;
mlxsw_sp_port = mlxsw_sp->ports[local_port];
if (!mlxsw_sp_port) {
dev_err_ratelimited(mlxsw_sp->bus_info->dev, "Incorrect local port in FDB notification\n");
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 077/121] mlxsw: spectrum: Protect driver from buggy firmware
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 076/121] mlxsw: Verify the accessed index doesnt exceed the array length Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 078/121] net: marvell: mvpp2: increase MTU limit when XDP enabled Greg Kroah-Hartman
` (52 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Amit Cohen, Ido Schimmel,
David S. Miller, Sasha Levin
From: Amit Cohen <amcohen@nvidia.com>
[ Upstream commit 63b08b1f6834bbb0b4f7783bf63b80c8c8e9a047 ]
When processing port up/down events generated by the device's firmware,
the driver protects itself from events reported for non-existent local
ports, but not the CPU port (local port 0), which exists, but lacks a
netdev.
This can result in a NULL pointer dereference when calling
netif_carrier_{on,off}().
Fix this by bailing early when processing an event reported for the CPU
port. Problem was only observed when running on top of a buggy emulator.
Fixes: 28b1987ef506 ("mlxsw: spectrum: Register CPU port with devlink")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 1a9978f501ba9..4110e15c22c79 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2058,7 +2058,7 @@ static void mlxsw_sp_pude_event_func(const struct mlxsw_reg_info *reg,
max_ports = mlxsw_core_max_ports(mlxsw_sp->core);
local_port = mlxsw_reg_pude_local_port_get(pude_pl);
- if (WARN_ON_ONCE(local_port >= max_ports))
+ if (WARN_ON_ONCE(!local_port || local_port >= max_ports))
return;
mlxsw_sp_port = mlxsw_sp->ports[local_port];
if (!mlxsw_sp_port)
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 078/121] net: marvell: mvpp2: increase MTU limit when XDP enabled
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 077/121] mlxsw: spectrum: Protect driver from buggy firmware Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 079/121] nvmet-tcp: fix incomplete data digest send Greg Kroah-Hartman
` (51 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, David S. Miller,
Sasha Levin
From: Marek Behún <kabel@kernel.org>
[ Upstream commit 7b1b62bc1e6a7b2fd5ee7a4296268eb291d23aeb ]
Currently mvpp2_xdp_setup won't allow attaching XDP program if
mtu > ETH_DATA_LEN (1500).
The mvpp2_change_mtu on the other hand checks whether
MVPP2_RX_PKT_SIZE(mtu) > MVPP2_BM_LONG_PKT_SIZE.
These two checks are semantically different.
Moreover this limit can be increased to MVPP2_MAX_RX_BUF_SIZE, since in
mvpp2_rx we have
xdp.data = data + MVPP2_MH_SIZE + MVPP2_SKB_HEADROOM;
xdp.frame_sz = PAGE_SIZE;
Change the checks to check whether
mtu > MVPP2_MAX_RX_BUF_SIZE
Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index ec9b6c564300e..e220d44df2e65 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -4652,11 +4652,13 @@ static int mvpp2_change_mtu(struct net_device *dev, int mtu)
mtu = ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8);
}
+ if (port->xdp_prog && mtu > MVPP2_MAX_RX_BUF_SIZE) {
+ netdev_err(dev, "Illegal MTU value %d (> %d) for XDP mode\n",
+ mtu, (int)MVPP2_MAX_RX_BUF_SIZE);
+ return -EINVAL;
+ }
+
if (MVPP2_RX_PKT_SIZE(mtu) > MVPP2_BM_LONG_PKT_SIZE) {
- if (port->xdp_prog) {
- netdev_err(dev, "Jumbo frames are not supported with XDP\n");
- return -EINVAL;
- }
if (priv->percpu_pools) {
netdev_warn(dev, "mtu %d too high, switching to shared buffers", mtu);
mvpp2_bm_switch_buffers(priv, false);
@@ -4942,8 +4944,8 @@ static int mvpp2_xdp_setup(struct mvpp2_port *port, struct netdev_bpf *bpf)
bool running = netif_running(port->dev);
bool reset = !prog != !port->xdp_prog;
- if (port->dev->mtu > ETH_DATA_LEN) {
- NL_SET_ERR_MSG_MOD(bpf->extack, "XDP is not supported with jumbo frames enabled");
+ if (port->dev->mtu > MVPP2_MAX_RX_BUF_SIZE) {
+ NL_SET_ERR_MSG_MOD(bpf->extack, "MTU too large for XDP");
return -EOPNOTSUPP;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 079/121] nvmet-tcp: fix incomplete data digest send
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 078/121] net: marvell: mvpp2: increase MTU limit when XDP enabled Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 080/121] net/ncsi : Add payload to be 32-bit aligned to fix dropped packets Greg Kroah-Hartman
` (50 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Varun Prakash, Sagi Grimberg,
Christoph Hellwig, Sasha Levin
From: Varun Prakash <varun@chelsio.com>
[ Upstream commit 102110efdff6beedece6ab9b51664c32ac01e2db ]
Current nvmet_try_send_ddgst() code does not check whether
all data digest bytes are transmitted, fix this by returning
-EAGAIN if all data digest bytes are not transmitted.
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/target/tcp.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index 1251fd6e92780..96b67a70cbbbd 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -688,10 +688,11 @@ static int nvmet_try_send_r2t(struct nvmet_tcp_cmd *cmd, bool last_in_batch)
static int nvmet_try_send_ddgst(struct nvmet_tcp_cmd *cmd, bool last_in_batch)
{
struct nvmet_tcp_queue *queue = cmd->queue;
+ int left = NVME_TCP_DIGEST_LENGTH - cmd->offset;
struct msghdr msg = { .msg_flags = MSG_DONTWAIT };
struct kvec iov = {
.iov_base = (u8 *)&cmd->exp_ddgst + cmd->offset,
- .iov_len = NVME_TCP_DIGEST_LENGTH - cmd->offset
+ .iov_len = left
};
int ret;
@@ -705,6 +706,10 @@ static int nvmet_try_send_ddgst(struct nvmet_tcp_cmd *cmd, bool last_in_batch)
return ret;
cmd->offset += ret;
+ left -= ret;
+
+ if (left)
+ return -EAGAIN;
if (queue->nvme_sq.sqhd_disabled) {
cmd->queue->snd_cmd = NULL;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 080/121] net/ncsi : Add payload to be 32-bit aligned to fix dropped packets
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 079/121] nvmet-tcp: fix incomplete data digest send Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 081/121] PM: hibernate: use correct mode for swsusp_close() Greg Kroah-Hartman
` (49 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kumar Thangavel,
Samuel Mendoza-Jonas, Paul Menzel, David S. Miller, Sasha Levin
From: Kumar Thangavel <kumarthangavel.hcl@gmail.com>
[ Upstream commit ac132852147ad303a938dda318970dd1bbdfda4e ]
Update NC-SI command handler (both standard and OEM) to take into
account of payload paddings in allocating skb (in case of payload
size is not 32-bit aligned).
The checksum field follows payload field, without taking payload
padding into account can cause checksum being truncated, leading to
dropped packets.
Fixes: fb4ee67529ff ("net/ncsi: Add NCSI OEM command support")
Signed-off-by: Kumar Thangavel <thangavel.k@hcl.com>
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ncsi/ncsi-cmd.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/net/ncsi/ncsi-cmd.c b/net/ncsi/ncsi-cmd.c
index ba9ae482141b0..dda8b76b77988 100644
--- a/net/ncsi/ncsi-cmd.c
+++ b/net/ncsi/ncsi-cmd.c
@@ -18,6 +18,8 @@
#include "internal.h"
#include "ncsi-pkt.h"
+static const int padding_bytes = 26;
+
u32 ncsi_calculate_checksum(unsigned char *data, int len)
{
u32 checksum = 0;
@@ -213,12 +215,17 @@ static int ncsi_cmd_handler_oem(struct sk_buff *skb,
{
struct ncsi_cmd_oem_pkt *cmd;
unsigned int len;
+ int payload;
+ /* NC-SI spec DSP_0222_1.2.0, section 8.2.2.2
+ * requires payload to be padded with 0 to
+ * 32-bit boundary before the checksum field.
+ * Ensure the padding bytes are accounted for in
+ * skb allocation
+ */
+ payload = ALIGN(nca->payload, 4);
len = sizeof(struct ncsi_cmd_pkt_hdr) + 4;
- if (nca->payload < 26)
- len += 26;
- else
- len += nca->payload;
+ len += max(payload, padding_bytes);
cmd = skb_put_zero(skb, len);
memcpy(&cmd->mfr_id, nca->data, nca->payload);
@@ -272,6 +279,7 @@ static struct ncsi_request *ncsi_alloc_command(struct ncsi_cmd_arg *nca)
struct net_device *dev = nd->dev;
int hlen = LL_RESERVED_SPACE(dev);
int tlen = dev->needed_tailroom;
+ int payload;
int len = hlen + tlen;
struct sk_buff *skb;
struct ncsi_request *nr;
@@ -281,14 +289,14 @@ static struct ncsi_request *ncsi_alloc_command(struct ncsi_cmd_arg *nca)
return NULL;
/* NCSI command packet has 16-bytes header, payload, 4 bytes checksum.
+ * Payload needs padding so that the checksum field following payload is
+ * aligned to 32-bit boundary.
* The packet needs padding if its payload is less than 26 bytes to
* meet 64 bytes minimal ethernet frame length.
*/
len += sizeof(struct ncsi_cmd_pkt_hdr) + 4;
- if (nca->payload < 26)
- len += 26;
- else
- len += nca->payload;
+ payload = ALIGN(nca->payload, 4);
+ len += max(payload, padding_bytes);
/* Allocate skb */
skb = alloc_skb(len, GFP_ATOMIC);
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 081/121] PM: hibernate: use correct mode for swsusp_close()
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 080/121] net/ncsi : Add payload to be 32-bit aligned to fix dropped packets Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 082/121] drm/amd/display: Set plane update flags for all planes in reset Greg Kroah-Hartman
` (48 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thomas Zeitlhofer, Rafael J. Wysocki,
Sasha Levin
From: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
[ Upstream commit cefcf24b4d351daf70ecd945324e200d3736821e ]
Commit 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in
swsusp_check()") changed the opening mode of the block device to
(FMODE_READ | FMODE_EXCL).
In the corresponding calls to swsusp_close(), the mode is still just
FMODE_READ which triggers the warning in blkdev_flush_mapping() on
resume from hibernate.
So, use the mode (FMODE_READ | FMODE_EXCL) also when closing the
device.
Fixes: 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()")
Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/power/hibernate.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 2fc7d509a34fc..bf640fd6142a0 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -688,7 +688,7 @@ static int load_image_and_restore(void)
goto Unlock;
error = swsusp_read(&flags);
- swsusp_close(FMODE_READ);
+ swsusp_close(FMODE_READ | FMODE_EXCL);
if (!error)
error = hibernation_restore(flags & SF_PLATFORM_MODE);
@@ -978,7 +978,7 @@ static int software_resume(void)
/* The snapshot device should not be opened while we're running */
if (!hibernate_acquire()) {
error = -EBUSY;
- swsusp_close(FMODE_READ);
+ swsusp_close(FMODE_READ | FMODE_EXCL);
goto Unlock;
}
@@ -1013,7 +1013,7 @@ static int software_resume(void)
pm_pr_dbg("Hibernation image not present or could not be loaded.\n");
return error;
Close_Finish:
- swsusp_close(FMODE_READ);
+ swsusp_close(FMODE_READ | FMODE_EXCL);
goto Finish;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 082/121] drm/amd/display: Set plane update flags for all planes in reset
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 081/121] PM: hibernate: use correct mode for swsusp_close() Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 083/121] tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows Greg Kroah-Hartman
` (47 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Harry Wentland, Qingqing Zhuo,
Nicholas Kazlauskas, Daniel Wheeler, Alex Deucher, Sasha Levin
From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
[ Upstream commit 21431f70f6014f81b0d118ff4fcee12b00b9dd70 ]
[Why]
We're only setting the flags on stream[0]'s planes so this logic fails
if we have more than one stream in the state.
This can cause a page flip timeout with multiple displays in the
configuration.
[How]
Index into the stream_status array using the stream index - it's a 1:1
mapping.
Fixes: cdaae8371aa9 ("drm/amd/display: Handle GPU reset for DC block")
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index d9525fbedad2d..a5b6f36fe1d72 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1963,8 +1963,8 @@ static int dm_resume(void *handle)
for (i = 0; i < dc_state->stream_count; i++) {
dc_state->streams[i]->mode_changed = true;
- for (j = 0; j < dc_state->stream_status->plane_count; j++) {
- dc_state->stream_status->plane_states[j]->update_flags.raw
+ for (j = 0; j < dc_state->stream_status[i].plane_count; j++) {
+ dc_state->stream_status[i].plane_states[j]->update_flags.raw
= 0xffffffff;
}
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 083/121] tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 082/121] drm/amd/display: Set plane update flags for all planes in reset Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 084/121] lan743x: fix deadlock in lan743x_phy_link_status_change() Greg Kroah-Hartman
` (46 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Neal Cardwell, Eric Dumazet,
Stephen Hemminger, Yuchung Cheng, Soheil Hassas Yeganeh,
Jakub Kicinski, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 4e1fddc98d2585ddd4792b5e44433dcee7ece001 ]
While testing BIG TCP patch series, I was expecting that TCP_RR workloads
with 80KB requests/answers would send one 80KB TSO packet,
then being received as a single GRO packet.
It turns out this was not happening, and the root cause was that
cubic Hystart ACK train was triggering after a few (2 or 3) rounds of RPC.
Hystart was wrongly setting CWND/SSTHRESH to 30, while my RPC
needed a budget of ~20 segments.
Ideally these TCP_RR flows should not exit slow start.
Cubic Hystart should reset itself at each round, instead of assuming
every TCP flow is a bulk one.
Note that even after this patch, Hystart can still trigger, depending
on scheduling artifacts, but at a higher CWND/SSTHRESH threshold,
keeping optimal TSO packet sizes.
Tested:
ip link set dev eth0 gro_ipv6_max_size 131072 gso_ipv6_max_size 131072
nstat -n; netperf -H ... -t TCP_RR -l 5 -- -r 80000,80000 -K cubic; nstat|egrep "Ip6InReceives|Hystart|Ip6OutRequests"
Before:
8605
Ip6InReceives 87541 0.0
Ip6OutRequests 129496 0.0
TcpExtTCPHystartTrainDetect 1 0.0
TcpExtTCPHystartTrainCwnd 30 0.0
After:
8760
Ip6InReceives 88514 0.0
Ip6OutRequests 87975 0.0
Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3")
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20211123202535.1843771-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/tcp_cubic.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/tcp_cubic.c b/net/ipv4/tcp_cubic.c
index c7bf5b26bf0c2..fffa011a007d4 100644
--- a/net/ipv4/tcp_cubic.c
+++ b/net/ipv4/tcp_cubic.c
@@ -337,8 +337,6 @@ static void bictcp_cong_avoid(struct sock *sk, u32 ack, u32 acked)
return;
if (tcp_in_slow_start(tp)) {
- if (hystart && after(ack, ca->end_seq))
- bictcp_hystart_reset(sk);
acked = tcp_slow_start(tp, acked);
if (!acked)
return;
@@ -398,6 +396,9 @@ static void hystart_update(struct sock *sk, u32 delay)
struct bictcp *ca = inet_csk_ca(sk);
u32 threshold;
+ if (after(tp->snd_una, ca->end_seq))
+ bictcp_hystart_reset(sk);
+
if (hystart_detect & HYSTART_ACK_TRAIN) {
u32 now = bictcp_clock_us(sk);
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 084/121] lan743x: fix deadlock in lan743x_phy_link_status_change()
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 083/121] tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 085/121] net: phylink: Force link down and retrigger resolve on interface change Greg Kroah-Hartman
` (45 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alessandro B Maurici,
Heiner Kallweit, Andrew Lunn, Jakub Kicinski, Sasha Levin
From: Heiner Kallweit <hkallweit1@gmail.com>
[ Upstream commit ddb826c2c92d461f290a7bab89e7c28696191875 ]
Usage of phy_ethtool_get_link_ksettings() in the link status change
handler isn't needed, and in combination with the referenced change
it results in a deadlock. Simply remove the call and replace it with
direct access to phydev->speed. The duplex argument of
lan743x_phy_update_flowcontrol() isn't used and can be removed.
Fixes: c10a485c3de5 ("phy: phy_ethtool_ksettings_get: Lock the phy for consistency")
Reported-by: Alessandro B Maurici <abmaurici@gmail.com>
Tested-by: Alessandro B Maurici <abmaurici@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/40e27f76-0ba3-dcef-ee32-a78b9df38b0f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/microchip/lan743x_main.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index 3eea8cf076c48..481f89d193f77 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -922,8 +922,7 @@ static int lan743x_phy_reset(struct lan743x_adapter *adapter)
}
static void lan743x_phy_update_flowcontrol(struct lan743x_adapter *adapter,
- u8 duplex, u16 local_adv,
- u16 remote_adv)
+ u16 local_adv, u16 remote_adv)
{
struct lan743x_phy *phy = &adapter->phy;
u8 cap;
@@ -951,7 +950,6 @@ static void lan743x_phy_link_status_change(struct net_device *netdev)
phy_print_status(phydev);
if (phydev->state == PHY_RUNNING) {
- struct ethtool_link_ksettings ksettings;
int remote_advertisement = 0;
int local_advertisement = 0;
@@ -988,18 +986,14 @@ static void lan743x_phy_link_status_change(struct net_device *netdev)
}
lan743x_csr_write(adapter, MAC_CR, data);
- memset(&ksettings, 0, sizeof(ksettings));
- phy_ethtool_get_link_ksettings(netdev, &ksettings);
local_advertisement =
linkmode_adv_to_mii_adv_t(phydev->advertising);
remote_advertisement =
linkmode_adv_to_mii_adv_t(phydev->lp_advertising);
- lan743x_phy_update_flowcontrol(adapter,
- ksettings.base.duplex,
- local_advertisement,
+ lan743x_phy_update_flowcontrol(adapter, local_advertisement,
remote_advertisement);
- lan743x_ptp_update_latency(adapter, ksettings.base.speed);
+ lan743x_ptp_update_latency(adapter, phydev->speed);
}
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 085/121] net: phylink: Force link down and retrigger resolve on interface change
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 084/121] lan743x: fix deadlock in lan743x_phy_link_status_change() Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 086/121] net: phylink: Force retrigger in case of latched link-fail indicator Greg Kroah-Hartman
` (44 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Russell King (Oracle),
Marek Behún, Jakub Kicinski, Sasha Levin
From: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[ Upstream commit 80662f4fd4771bc9c7cc4abdfbe866ebd1179621 ]
On PHY state change the phylink_resolve() function can read stale
information from the MAC and report incorrect link speed and duplex to
the kernel message log.
Example with a Marvell 88X3310 PHY connected to a SerDes port on Marvell
88E6393X switch:
- PHY driver triggers state change due to PHY interface mode being
changed from 10gbase-r to 2500base-x due to copper change in speed
from 10Gbps to 2.5Gbps, but the PHY itself either hasn't yet changed
its interface to the host, or the interrupt about loss of SerDes link
hadn't arrived yet (there can be a delay of several milliseconds for
this), so we still think that the 10gbase-r mode is up
- phylink_resolve()
- phylink_mac_pcs_get_state()
- this fills in speed=10g link=up
- interface mode is updated to 2500base-x but speed is left at 10Gbps
- phylink_major_config()
- interface is changed to 2500base-x
- phylink_link_up()
- mv88e6xxx_mac_link_up()
- .port_set_speed_duplex()
- speed is set to 10Gbps
- reports "Link is Up - 10Gbps/Full" to dmesg
Afterwards when the interrupt finally arrives for mv88e6xxx, another
resolve is forced in which we get the correct speed from
phylink_mac_pcs_get_state(), but since the interface is not being
changed anymore, we don't call phylink_major_config() but only
phylink_mac_config(), which does not set speed/duplex anymore.
To fix this, we need to force the link down and trigger another resolve
on PHY interface change event.
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/phylink.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 899496f089d2e..8279e08dad9db 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -644,6 +644,7 @@ static void phylink_resolve(struct work_struct *w)
struct phylink_link_state link_state;
struct net_device *ndev = pl->netdev;
bool mac_config = false;
+ bool retrigger = false;
bool cur_link_state;
mutex_lock(&pl->state_mutex);
@@ -657,6 +658,7 @@ static void phylink_resolve(struct work_struct *w)
link_state.link = false;
} else if (pl->mac_link_dropped) {
link_state.link = false;
+ retrigger = true;
} else {
switch (pl->cur_link_an_mode) {
case MLO_AN_PHY:
@@ -680,6 +682,15 @@ static void phylink_resolve(struct work_struct *w)
/* Only update if the PHY link is up */
if (pl->phydev && pl->phy_state.link) {
+ /* If the interface has changed, force a
+ * link down event if the link isn't already
+ * down, and re-resolve.
+ */
+ if (link_state.interface !=
+ pl->phy_state.interface) {
+ retrigger = true;
+ link_state.link = false;
+ }
link_state.interface = pl->phy_state.interface;
/* If we have a PHY, we need to update with
@@ -721,7 +732,7 @@ static void phylink_resolve(struct work_struct *w)
else
phylink_link_up(pl, link_state);
}
- if (!link_state.link && pl->mac_link_dropped) {
+ if (!link_state.link && retrigger) {
pl->mac_link_dropped = false;
queue_work(system_power_efficient_wq, &pl->resolve);
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 086/121] net: phylink: Force retrigger in case of latched link-fail indicator
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 085/121] net: phylink: Force link down and retrigger resolve on interface change Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 087/121] net/smc: Fix NULL pointer dereferencing in smc_vlan_by_tcpsk() Greg Kroah-Hartman
` (43 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Russell King (Oracle),
Marek Behún, Jakub Kicinski, Sasha Levin
From: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[ Upstream commit dbae3388ea9ca33bd1d5eabc3b0ef17e69c74677 ]
On mv88e6xxx 1G/2.5G PCS, the SerDes register 4.2001.2 has the following
description:
This register bit indicates when link was lost since the last
read. For the current link status, read this register
back-to-back.
Thus to get current link state, we need to read the register twice.
But doing that in the link change interrupt handler would lead to
potentially ignoring link down events, which we really want to avoid.
Thus this needs to be solved in phylink's resolve, by retriggering
another resolve in the event when PCS reports link down and previous
link was up, and by re-reading PCS state if the previous link was down.
The wrong value is read when phylink requests change from sgmii to
2500base-x mode, and link won't come up. This fixes the bug.
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/phylink.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 8279e08dad9db..57b1b138522e0 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -675,6 +675,19 @@ static void phylink_resolve(struct work_struct *w)
case MLO_AN_INBAND:
phylink_mac_pcs_get_state(pl, &link_state);
+ /* The PCS may have a latching link-fail indicator.
+ * If the link was up, bring the link down and
+ * re-trigger the resolve. Otherwise, re-read the
+ * PCS state to get the current status of the link.
+ */
+ if (!link_state.link) {
+ if (cur_link_state)
+ retrigger = true;
+ else
+ phylink_mac_pcs_get_state(pl,
+ &link_state);
+ }
+
/* If we have a phy, the "up" state is the union of
* both the PHY and the MAC */
if (pl->phydev)
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 087/121] net/smc: Fix NULL pointer dereferencing in smc_vlan_by_tcpsk()
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 086/121] net: phylink: Force retrigger in case of latched link-fail indicator Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 088/121] net/smc: Fix loop in smc_listen Greg Kroah-Hartman
` (42 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Julian Wiedmann, Karsten Graul,
Jakub Kicinski, Sasha Levin
From: Karsten Graul <kgraul@linux.ibm.com>
[ Upstream commit 587acad41f1bc48e16f42bb2aca63bf323380be8 ]
Coverity reports a possible NULL dereferencing problem:
in smc_vlan_by_tcpsk():
6. returned_null: netdev_lower_get_next returns NULL (checked 29 out of 30 times).
7. var_assigned: Assigning: ndev = NULL return value from netdev_lower_get_next.
1623 ndev = (struct net_device *)netdev_lower_get_next(ndev, &lower);
CID 1468509 (#1 of 1): Dereference null return value (NULL_RETURNS)
8. dereference: Dereferencing a pointer that might be NULL ndev when calling is_vlan_dev.
1624 if (is_vlan_dev(ndev)) {
Remove the manual implementation and use netdev_walk_all_lower_dev() to
iterate over the lower devices. While on it remove an obsolete function
parameter comment.
Fixes: cb9d43f67754 ("net/smc: determine vlan_id of stacked net_device")
Suggested-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/smc/smc_core.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c
index 109d790eaebe2..cd625b672429f 100644
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -1209,14 +1209,26 @@ static void smc_link_down_work(struct work_struct *work)
mutex_unlock(&lgr->llc_conf_mutex);
}
-/* Determine vlan of internal TCP socket.
- * @vlan_id: address to store the determined vlan id into
- */
+static int smc_vlan_by_tcpsk_walk(struct net_device *lower_dev,
+ struct netdev_nested_priv *priv)
+{
+ unsigned short *vlan_id = (unsigned short *)priv->data;
+
+ if (is_vlan_dev(lower_dev)) {
+ *vlan_id = vlan_dev_vlan_id(lower_dev);
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Determine vlan of internal TCP socket. */
int smc_vlan_by_tcpsk(struct socket *clcsock, struct smc_init_info *ini)
{
struct dst_entry *dst = sk_dst_get(clcsock->sk);
+ struct netdev_nested_priv priv;
struct net_device *ndev;
- int i, nest_lvl, rc = 0;
+ int rc = 0;
ini->vlan_id = 0;
if (!dst) {
@@ -1234,20 +1246,9 @@ int smc_vlan_by_tcpsk(struct socket *clcsock, struct smc_init_info *ini)
goto out_rel;
}
+ priv.data = (void *)&ini->vlan_id;
rtnl_lock();
- nest_lvl = ndev->lower_level;
- for (i = 0; i < nest_lvl; i++) {
- struct list_head *lower = &ndev->adj_list.lower;
-
- if (list_empty(lower))
- break;
- lower = lower->next;
- ndev = (struct net_device *)netdev_lower_get_next(ndev, &lower);
- if (is_vlan_dev(ndev)) {
- ini->vlan_id = vlan_dev_vlan_id(ndev);
- break;
- }
- }
+ netdev_walk_all_lower_dev(ndev, smc_vlan_by_tcpsk_walk, &priv);
rtnl_unlock();
out_rel:
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 088/121] net/smc: Fix loop in smc_listen
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 087/121] net/smc: Fix NULL pointer dereferencing in smc_vlan_by_tcpsk() Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 089/121] nvmet: use IOCB_NOWAIT only if the filesystem supports it Greg Kroah-Hartman
` (41 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Guo DaXing, Tony Lu, Karsten Graul,
Jakub Kicinski, Sasha Levin
From: Guo DaXing <guodaxing@huawei.com>
[ Upstream commit 9ebb0c4b27a6158303b791b5b91e66d7665ee30e ]
The kernel_listen function in smc_listen will fail when all the available
ports are occupied. At this point smc->clcsock->sk->sk_data_ready has
been changed to smc_clcsock_data_ready. When we call smc_listen again,
now both smc->clcsock->sk->sk_data_ready and smc->clcsk_data_ready point
to the smc_clcsock_data_ready function.
The smc_clcsock_data_ready() function calls lsmc->clcsk_data_ready which
now points to itself resulting in an infinite loop.
This patch restores smc->clcsock->sk->sk_data_ready with the old value.
Fixes: a60a2b1e0af1 ("net/smc: reduce active tcp_listen workers")
Signed-off-by: Guo DaXing <guodaxing@huawei.com>
Acked-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/smc/af_smc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index cfb5b9be0569d..a0d3f4e07b067 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -1864,8 +1864,10 @@ static int smc_listen(struct socket *sock, int backlog)
smc->clcsock->sk->sk_user_data =
(void *)((uintptr_t)smc | SK_USER_DATA_NOCOPY);
rc = kernel_listen(smc->clcsock, backlog);
- if (rc)
+ if (rc) {
+ smc->clcsock->sk->sk_data_ready = smc->clcsk_data_ready;
goto out;
+ }
sk->sk_max_ack_backlog = backlog;
sk->sk_ack_backlog = 0;
sk->sk_state = SMC_LISTEN;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 089/121] nvmet: use IOCB_NOWAIT only if the filesystem supports it
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (87 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 088/121] net/smc: Fix loop in smc_listen Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 090/121] igb: fix netpoll exit with traffic Greg Kroah-Hartman
` (40 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maurizio Lombardi,
Chaitanya Kulkarni, Christoph Hellwig, Sasha Levin
From: Maurizio Lombardi <mlombard@redhat.com>
[ Upstream commit c024b226a417c4eb9353ff500b1c823165d4d508 ]
Submit I/O requests with the IOCB_NOWAIT flag set only if
the underlying filesystem supports it.
Fixes: 50a909db36f2 ("nvmet: use IOCB_NOWAIT for file-ns buffered I/O")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/target/io-cmd-file.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
index b575997244482..c81690b2a681b 100644
--- a/drivers/nvme/target/io-cmd-file.c
+++ b/drivers/nvme/target/io-cmd-file.c
@@ -8,6 +8,7 @@
#include <linux/uio.h>
#include <linux/falloc.h>
#include <linux/file.h>
+#include <linux/fs.h>
#include "nvmet.h"
#define NVMET_MAX_MPOOL_BVEC 16
@@ -266,7 +267,8 @@ static void nvmet_file_execute_rw(struct nvmet_req *req)
if (req->ns->buffered_io) {
if (likely(!req->f.mpool_alloc) &&
- nvmet_file_execute_io(req, IOCB_NOWAIT))
+ (req->ns->file->f_mode & FMODE_NOWAIT) &&
+ nvmet_file_execute_io(req, IOCB_NOWAIT))
return;
nvmet_file_submit_buffered_io(req);
} else
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 090/121] igb: fix netpoll exit with traffic
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (88 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 089/121] nvmet: use IOCB_NOWAIT only if the filesystem supports it Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 091/121] MIPS: loongson64: fix FTLB configuration Greg Kroah-Hartman
` (39 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oleksandr Natalenko, Danielle Ratson,
Alexander Duyck, Jesse Brandeburg, Jakub Kicinski, Sasha Levin
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
[ Upstream commit eaeace60778e524a2820d0c0ad60bf80289e292c ]
Oleksandr brought a bug report where netpoll causes trace
messages in the log on igb.
Danielle brought this back up as still occurring, so we'll try
again.
[22038.710800] ------------[ cut here ]------------
[22038.710801] igb_poll+0x0/0x1440 [igb] exceeded budget in poll
[22038.710802] WARNING: CPU: 12 PID: 40362 at net/core/netpoll.c:155 netpoll_poll_dev+0x18a/0x1a0
As Alex suggested, change the driver to return work_done at the
exit of napi_poll, which should be safe to do in this driver
because it is not polling multiple queues in this single napi
context (multiple queues attached to one MSI-X vector). Several
other drivers contain the same simple sequence, so I hope
this will not create new problems.
Fixes: 16eb8815c235 ("igb: Refactor clean_rx_irq to reduce overhead and improve performance")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Danielle Ratson <danieller@nvidia.com>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Danielle Ratson <danieller@nvidia.com>
Link: https://lore.kernel.org/r/20211123204000.1597971-1-jesse.brandeburg@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igb/igb_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index e24fb122c03a2..d5432d1448c05 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -8032,7 +8032,7 @@ static int igb_poll(struct napi_struct *napi, int budget)
if (likely(napi_complete_done(napi, work_done)))
igb_ring_irq_enable(q_vector);
- return min(work_done, budget - 1);
+ return work_done;
}
/**
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 091/121] MIPS: loongson64: fix FTLB configuration
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (89 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 090/121] igb: fix netpoll exit with traffic Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 092/121] MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48 Greg Kroah-Hartman
` (38 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Huang Pei, Thomas Bogendoerfer, Sasha Levin
From: Huang Pei <huangpei@loongson.cn>
[ Upstream commit 7db5e9e9e5e6c10d7d26f8df7f8fd8841cb15ee7 ]
It turns out that 'decode_configs' -> 'set_ftlb_enable' is called under
c->cputype unset, which leaves FTLB disabled on BOTH 3A2000 and 3A3000
Fix it by calling "decode_configs" after c->cputype is initialized
Fixes: da1bd29742b1 ("MIPS: Loongson64: Probe CPU features via CPUCFG")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/kernel/cpu-probe.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 067cb3eb16141..d120201910acf 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1721,8 +1721,6 @@ static inline void decode_cpucfg(struct cpuinfo_mips *c)
static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
{
- decode_configs(c);
-
/* All Loongson processors covered here define ExcCode 16 as GSExc. */
c->options |= MIPS_CPU_GSEXCEX;
@@ -1783,6 +1781,8 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
panic("Unknown Loongson Processor ID!");
break;
}
+
+ decode_configs(c);
}
#else
static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { }
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 092/121] MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (90 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 091/121] MIPS: loongson64: fix FTLB configuration Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 093/121] tls: splice_read: fix record type check Greg Kroah-Hartman
` (37 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Huang Pei, Thomas Bogendoerfer, Sasha Levin
From: Huang Pei <huangpei@loongson.cn>
[ Upstream commit 41ce097f714401e6ad8f3f5eb30d7f91b0b5e495 ]
It hangup when booting Loongson 3A1000 with BOTH
CONFIG_PAGE_SIZE_64KB and CONFIG_MIPS_VA_BITS_48, that it turn
out to use 2-level pgtable instead of 3-level. 64KB page size
with 2-level pgtable only cover 42 bits VA, use 3-level pgtable
to cover all 48 bits VA(55 bits)
Fixes: 1e321fa917fb ("MIPS64: Support of at least 48 bits of SEGBITS)
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 94a748e95231b..23d756fe0fd6c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -3189,7 +3189,7 @@ config STACKTRACE_SUPPORT
config PGTABLE_LEVELS
int
default 4 if PAGE_SIZE_4KB && MIPS_VA_BITS_48
- default 3 if 64BIT && !PAGE_SIZE_64KB
+ default 3 if 64BIT && (!PAGE_SIZE_64KB || MIPS_VA_BITS_48)
default 2
config MIPS_AUTO_PFN_OFFSET
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 093/121] tls: splice_read: fix record type check
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (91 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 092/121] MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48 Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 094/121] tls: fix replacing proto_ops Greg Kroah-Hartman
` (36 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jakub Kicinski, Sasha Levin
From: Jakub Kicinski <kuba@kernel.org>
[ Upstream commit 520493f66f6822551aef2879cd40207074fe6980 ]
We don't support splicing control records. TLS 1.3 changes moved
the record type check into the decrypt if(). The skb may already
be decrypted and still be an alert.
Note that decrypt_skb_update() is idempotent and updates ctx->decrypted
so the if() is pointless.
Reorder the check for decryption errors with the content type check
while touching them. This part is not really a bug, because if
decryption failed in TLS 1.3 content type will be DATA, and for
TLS 1.2 it will be correct. Nevertheless its strange to touch output
before checking if the function has failed.
Fixes: fedf201e1296 ("net: tls: Refactor control message handling on recv")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/tls/tls_sw.c | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c
index 14cce61160a58..122d5daed8b61 100644
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -2007,21 +2007,18 @@ ssize_t tls_sw_splice_read(struct socket *sock, loff_t *ppos,
if (!skb)
goto splice_read_end;
- if (!ctx->decrypted) {
- err = decrypt_skb_update(sk, skb, NULL, &chunk, &zc, false);
-
- /* splice does not support reading control messages */
- if (ctx->control != TLS_RECORD_TYPE_DATA) {
- err = -EINVAL;
- goto splice_read_end;
- }
+ err = decrypt_skb_update(sk, skb, NULL, &chunk, &zc, false);
+ if (err < 0) {
+ tls_err_abort(sk, -EBADMSG);
+ goto splice_read_end;
+ }
- if (err < 0) {
- tls_err_abort(sk, -EBADMSG);
- goto splice_read_end;
- }
- ctx->decrypted = 1;
+ /* splice does not support reading control messages */
+ if (ctx->control != TLS_RECORD_TYPE_DATA) {
+ err = -EINVAL;
+ goto splice_read_end;
}
+
rxm = strp_msg(skb);
chunk = min_t(unsigned int, rxm->full_len, len);
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 094/121] tls: fix replacing proto_ops
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (92 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 093/121] tls: splice_read: fix record type check Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 095/121] net/sched: sch_ets: dont peek at classes beyond nbands Greg Kroah-Hartman
` (35 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jakub Kicinski, Sasha Levin
From: Jakub Kicinski <kuba@kernel.org>
[ Upstream commit f3911f73f51d1534f4db70b516cc1fcb6be05bae ]
We replace proto_ops whenever TLS is configured for RX. But our
replacement also overrides sendpage_locked, which will crash
unless TX is also configured. Similarly we plug both of those
in for TLS_HW (NIC crypto offload) even tho TLS_HW has a completely
different implementation for TX.
Last but not least we always plug in something based on inet_stream_ops
even though a few of the callbacks differ for IPv6 (getname, release,
bind).
Use a callback building method similar to what we do for struct proto.
Fixes: c46234ebb4d1 ("tls: RX path for ktls")
Fixes: d4ffb02dee2f ("net/tls: enable sk_msg redirect to tls socket egress")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/tls/tls_main.c | 47 +++++++++++++++++++++++++++++++++++++++-------
1 file changed, 40 insertions(+), 7 deletions(-)
diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c
index 32a51b20509c9..58d22d6b86ae6 100644
--- a/net/tls/tls_main.c
+++ b/net/tls/tls_main.c
@@ -61,7 +61,7 @@ static DEFINE_MUTEX(tcpv6_prot_mutex);
static const struct proto *saved_tcpv4_prot;
static DEFINE_MUTEX(tcpv4_prot_mutex);
static struct proto tls_prots[TLS_NUM_PROTS][TLS_NUM_CONFIG][TLS_NUM_CONFIG];
-static struct proto_ops tls_sw_proto_ops;
+static struct proto_ops tls_proto_ops[TLS_NUM_PROTS][TLS_NUM_CONFIG][TLS_NUM_CONFIG];
static void build_protos(struct proto prot[TLS_NUM_CONFIG][TLS_NUM_CONFIG],
const struct proto *base);
@@ -71,6 +71,8 @@ void update_sk_prot(struct sock *sk, struct tls_context *ctx)
WRITE_ONCE(sk->sk_prot,
&tls_prots[ip_ver][ctx->tx_conf][ctx->rx_conf]);
+ WRITE_ONCE(sk->sk_socket->ops,
+ &tls_proto_ops[ip_ver][ctx->tx_conf][ctx->rx_conf]);
}
int wait_on_pending_writer(struct sock *sk, long *timeo)
@@ -578,8 +580,6 @@ static int do_tls_setsockopt_conf(struct sock *sk, sockptr_t optval,
if (tx) {
ctx->sk_write_space = sk->sk_write_space;
sk->sk_write_space = tls_write_space;
- } else {
- sk->sk_socket->ops = &tls_sw_proto_ops;
}
goto out;
@@ -637,6 +637,39 @@ struct tls_context *tls_ctx_create(struct sock *sk)
return ctx;
}
+static void build_proto_ops(struct proto_ops ops[TLS_NUM_CONFIG][TLS_NUM_CONFIG],
+ const struct proto_ops *base)
+{
+ ops[TLS_BASE][TLS_BASE] = *base;
+
+ ops[TLS_SW ][TLS_BASE] = ops[TLS_BASE][TLS_BASE];
+ ops[TLS_SW ][TLS_BASE].sendpage_locked = tls_sw_sendpage_locked;
+
+ ops[TLS_BASE][TLS_SW ] = ops[TLS_BASE][TLS_BASE];
+ ops[TLS_BASE][TLS_SW ].splice_read = tls_sw_splice_read;
+
+ ops[TLS_SW ][TLS_SW ] = ops[TLS_SW ][TLS_BASE];
+ ops[TLS_SW ][TLS_SW ].splice_read = tls_sw_splice_read;
+
+#ifdef CONFIG_TLS_DEVICE
+ ops[TLS_HW ][TLS_BASE] = ops[TLS_BASE][TLS_BASE];
+ ops[TLS_HW ][TLS_BASE].sendpage_locked = NULL;
+
+ ops[TLS_HW ][TLS_SW ] = ops[TLS_BASE][TLS_SW ];
+ ops[TLS_HW ][TLS_SW ].sendpage_locked = NULL;
+
+ ops[TLS_BASE][TLS_HW ] = ops[TLS_BASE][TLS_SW ];
+
+ ops[TLS_SW ][TLS_HW ] = ops[TLS_SW ][TLS_SW ];
+
+ ops[TLS_HW ][TLS_HW ] = ops[TLS_HW ][TLS_SW ];
+ ops[TLS_HW ][TLS_HW ].sendpage_locked = NULL;
+#endif
+#ifdef CONFIG_TLS_TOE
+ ops[TLS_HW_RECORD][TLS_HW_RECORD] = *base;
+#endif
+}
+
static void tls_build_proto(struct sock *sk)
{
int ip_ver = sk->sk_family == AF_INET6 ? TLSV6 : TLSV4;
@@ -648,6 +681,8 @@ static void tls_build_proto(struct sock *sk)
mutex_lock(&tcpv6_prot_mutex);
if (likely(prot != saved_tcpv6_prot)) {
build_protos(tls_prots[TLSV6], prot);
+ build_proto_ops(tls_proto_ops[TLSV6],
+ sk->sk_socket->ops);
smp_store_release(&saved_tcpv6_prot, prot);
}
mutex_unlock(&tcpv6_prot_mutex);
@@ -658,6 +693,8 @@ static void tls_build_proto(struct sock *sk)
mutex_lock(&tcpv4_prot_mutex);
if (likely(prot != saved_tcpv4_prot)) {
build_protos(tls_prots[TLSV4], prot);
+ build_proto_ops(tls_proto_ops[TLSV4],
+ sk->sk_socket->ops);
smp_store_release(&saved_tcpv4_prot, prot);
}
mutex_unlock(&tcpv4_prot_mutex);
@@ -868,10 +905,6 @@ static int __init tls_register(void)
if (err)
return err;
- tls_sw_proto_ops = inet_stream_ops;
- tls_sw_proto_ops.splice_read = tls_sw_splice_read;
- tls_sw_proto_ops.sendpage_locked = tls_sw_sendpage_locked;
-
tls_device_init();
tcp_register_ulp(&tcp_tls_ulp_ops);
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 095/121] net/sched: sch_ets: dont peek at classes beyond nbands
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (93 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 094/121] tls: fix replacing proto_ops Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 096/121] net: vlan: fix underflow for the real_dev refcnt Greg Kroah-Hartman
` (34 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hangbin Liu, Davide Caratti,
Jakub Kicinski, Sasha Levin
From: Davide Caratti <dcaratti@redhat.com>
[ Upstream commit de6d25924c2a8c2988c6a385990cafbe742061bf ]
when the number of DRR classes decreases, the round-robin active list can
contain elements that have already been freed in ets_qdisc_change(). As a
consequence, it's possible to see a NULL dereference crash, caused by the
attempt to call cl->qdisc->ops->peek(cl->qdisc) when cl->qdisc is NULL:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 910 Comm: mausezahn Not tainted 5.16.0-rc1+ #475
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
RIP: 0010:ets_qdisc_dequeue+0x129/0x2c0 [sch_ets]
Code: c5 01 41 39 ad e4 02 00 00 0f 87 18 ff ff ff 49 8b 85 c0 02 00 00 49 39 c4 0f 84 ba 00 00 00 49 8b ad c0 02 00 00 48 8b 7d 10 <48> 8b 47 18 48 8b 40 38 0f ae e8 ff d0 48 89 c3 48 85 c0 0f 84 9d
RSP: 0000:ffffbb36c0b5fdd8 EFLAGS: 00010287
RAX: ffff956678efed30 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000002 RSI: ffffffff9b938dc9 RDI: 0000000000000000
RBP: ffff956678efed30 R08: e2f3207fe360129c R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff956678efeac0
R13: ffff956678efe800 R14: ffff956611545000 R15: ffff95667ac8f100
FS: 00007f2aa9120740(0000) GS:ffff95667b800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 000000011070c000 CR4: 0000000000350ee0
Call Trace:
<TASK>
qdisc_peek_dequeued+0x29/0x70 [sch_ets]
tbf_dequeue+0x22/0x260 [sch_tbf]
__qdisc_run+0x7f/0x630
net_tx_action+0x290/0x4c0
__do_softirq+0xee/0x4f8
irq_exit_rcu+0xf4/0x130
sysvec_apic_timer_interrupt+0x52/0xc0
asm_sysvec_apic_timer_interrupt+0x12/0x20
RIP: 0033:0x7f2aa7fc9ad4
Code: b9 ff ff 48 8b 54 24 18 48 83 c4 08 48 89 ee 48 89 df 5b 5d e9 ed fc ff ff 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa <53> 48 83 ec 10 48 8b 05 10 64 33 00 48 8b 00 48 85 c0 0f 85 84 00
RSP: 002b:00007ffe5d33fab8 EFLAGS: 00000202
RAX: 0000000000000002 RBX: 0000561f72c31460 RCX: 0000561f72c31720
RDX: 0000000000000002 RSI: 0000561f72c31722 RDI: 0000561f72c31720
RBP: 000000000000002a R08: 00007ffe5d33fa40 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 0000561f7187e380
R13: 0000000000000000 R14: 0000000000000000 R15: 0000561f72c31460
</TASK>
Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt intel_rapl_msr iTCO_vendor_support intel_rapl_common joydev virtio_balloon lpc_ich i2c_i801 i2c_smbus pcspkr ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel serio_raw libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000018
Ensuring that 'alist' was never zeroed [1] was not sufficient, we need to
remove from the active list those elements that are no more SP nor DRR.
[1] https://lore.kernel.org/netdev/60d274838bf09777f0371253416e8af71360bc08.1633609148.git.dcaratti@redhat.com/
v3: fix race between ets_qdisc_change() and ets_qdisc_dequeue() delisting
DRR classes beyond 'nbands' in ets_qdisc_change() with the qdisc lock
acquired, thanks to Cong Wang.
v2: when a NULL qdisc is found in the DRR active list, try to dequeue skb
from the next list item.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7a5c496eed2d62241620bdbb83eb03fb9d571c99.1637762721.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/sched/sch_ets.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/net/sched/sch_ets.c b/net/sched/sch_ets.c
index c76701ac35abf..c34cb6e81d855 100644
--- a/net/sched/sch_ets.c
+++ b/net/sched/sch_ets.c
@@ -667,12 +667,14 @@ static int ets_qdisc_change(struct Qdisc *sch, struct nlattr *opt,
q->classes[i].deficit = quanta[i];
}
}
+ for (i = q->nbands; i < oldbands; i++) {
+ qdisc_tree_flush_backlog(q->classes[i].qdisc);
+ if (i >= q->nstrict)
+ list_del(&q->classes[i].alist);
+ }
q->nstrict = nstrict;
memcpy(q->prio2band, priomap, sizeof(priomap));
- for (i = q->nbands; i < oldbands; i++)
- qdisc_tree_flush_backlog(q->classes[i].qdisc);
-
for (i = 0; i < q->nbands; i++)
q->classes[i].quantum = quanta[i];
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 096/121] net: vlan: fix underflow for the real_dev refcnt
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (94 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 095/121] net/sched: sch_ets: dont peek at classes beyond nbands Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 097/121] net/smc: Dont call clcsock shutdown twice when smc shutdown Greg Kroah-Hartman
` (33 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Petr Machata, Jakub Kicinski,
Ziyang Xuan, Sasha Levin
From: Ziyang Xuan <william.xuanziyang@huawei.com>
[ Upstream commit 01d9cc2dea3fde3bad6d27f464eff463496e2b00 ]
Inject error before dev_hold(real_dev) in register_vlan_dev(),
and execute the following testcase:
ip link add dev dummy1 type dummy
ip link add name dummy1.100 link dummy1 type vlan id 100
ip link del dev dummy1
When the dummy netdevice is removed, we will get a WARNING as following:
=======================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0
and an endless loop of:
=======================================================================
unregister_netdevice: waiting for dummy1 to become free. Usage count = -1073741824
That is because dev_put(real_dev) in vlan_dev_free() be called without
dev_hold(real_dev) in register_vlan_dev(). It makes the refcnt of real_dev
underflow.
Move the dev_hold(real_dev) to vlan_dev_init() which is the call-back of
ndo_init(). That makes dev_hold() and dev_put() for vlan's real_dev
symmetrical.
Fixes: 563bcbae3ba2 ("net: vlan: fix a UAF in vlan_dev_real_dev()")
Reported-by: Petr Machata <petrm@nvidia.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/r/20211126015942.2918542-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/8021q/vlan.c | 3 ---
net/8021q/vlan_dev.c | 3 +++
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index ad3780067a7d8..d12c9a8a9953e 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -181,9 +181,6 @@ int register_vlan_dev(struct net_device *dev, struct netlink_ext_ack *extack)
if (err)
goto out_unregister_netdev;
- /* Account for reference in struct vlan_dev_priv */
- dev_hold(real_dev);
-
vlan_stacked_transfer_operstate(real_dev, dev, vlan);
linkwatch_fire_event(dev); /* _MUST_ call rfc2863_policy() */
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index c7eba7dab0938..86a1c99025ea0 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -606,6 +606,9 @@ static int vlan_dev_init(struct net_device *dev)
if (!vlan->vlan_pcpu_stats)
return -ENOMEM;
+ /* Get vlan's reference to real_dev */
+ dev_hold(real_dev);
+
return 0;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 097/121] net/smc: Dont call clcsock shutdown twice when smc shutdown
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (95 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 096/121] net: vlan: fix underflow for the real_dev refcnt Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 098/121] net: hns3: fix VF RSS failed problem after PF enable multi-TCs Greg Kroah-Hartman
` (32 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tony Lu, Wen Gu, Karsten Graul,
Jakub Kicinski, Sasha Levin
From: Tony Lu <tonylu@linux.alibaba.com>
[ Upstream commit bacb6c1e47691cda4a95056c21b5487fb7199fcc ]
When applications call shutdown() with SHUT_RDWR in userspace,
smc_close_active() calls kernel_sock_shutdown(), and it is called
twice in smc_shutdown().
This fixes this by checking sk_state before do clcsock shutdown, and
avoids missing the application's call of smc_shutdown().
Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/
Fixes: 606a63c9783a ("net/smc: Ensure the active closing peer first closes clcsock")
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20211126024134.45693-1-tonylu@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/smc/af_smc.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index a0d3f4e07b067..ac8265e35b2d2 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -2098,8 +2098,10 @@ static __poll_t smc_poll(struct file *file, struct socket *sock,
static int smc_shutdown(struct socket *sock, int how)
{
struct sock *sk = sock->sk;
+ bool do_shutdown = true;
struct smc_sock *smc;
int rc = -EINVAL;
+ int old_state;
int rc1 = 0;
smc = smc_sk(sk);
@@ -2126,7 +2128,11 @@ static int smc_shutdown(struct socket *sock, int how)
}
switch (how) {
case SHUT_RDWR: /* shutdown in both directions */
+ old_state = sk->sk_state;
rc = smc_close_active(smc);
+ if (old_state == SMC_ACTIVE &&
+ sk->sk_state == SMC_PEERCLOSEWAIT1)
+ do_shutdown = false;
break;
case SHUT_WR:
rc = smc_close_shutdown_write(smc);
@@ -2136,7 +2142,7 @@ static int smc_shutdown(struct socket *sock, int how)
/* nothing more to do because peer is not involved */
break;
}
- if (smc->clcsock)
+ if (do_shutdown && smc->clcsock)
rc1 = kernel_sock_shutdown(smc->clcsock, how);
/* map sock_shutdown_cmd constants to sk_shutdown value range */
sk->sk_shutdown |= how + 1;
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 098/121] net: hns3: fix VF RSS failed problem after PF enable multi-TCs
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (96 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 097/121] net/smc: Dont call clcsock shutdown twice when smc shutdown Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 099/121] net: mscc: ocelot: dont downgrade timestamping RX filters in SIOCSHWTSTAMP Greg Kroah-Hartman
` (31 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Guangbin Huang, Jakub Kicinski, Sasha Levin
From: Guangbin Huang <huangguangbin2@huawei.com>
[ Upstream commit 8d2ad993aa05c0768f00c886c9d369cd97a337ac ]
When PF is set to multi-TCs and configured mapping relationship between
priorities and TCs, the hardware will active these settings for this PF
and its VFs.
In this case when VF just uses one TC and its rx packets contain priority,
and if the priority is not mapped to TC0, as other TCs of VF is not valid,
hardware always put this kind of packets to the queue 0. It cause this kind
of packets of VF can not be used RSS function.
To fix this problem, set tc mode of all unused TCs of VF to the setting of
TC0, then rx packet with priority which map to unused TC will be direct to
TC0.
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index e27af38f6b161..6e7da1dc2e8c3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -679,9 +679,9 @@ static int hclgevf_set_rss_tc_mode(struct hclgevf_dev *hdev, u16 rss_size)
roundup_size = ilog2(roundup_size);
for (i = 0; i < HCLGEVF_MAX_TC_NUM; i++) {
- tc_valid[i] = !!(hdev->hw_tc_map & BIT(i));
+ tc_valid[i] = 1;
tc_size[i] = roundup_size;
- tc_offset[i] = rss_size * i;
+ tc_offset[i] = (hdev->hw_tc_map & BIT(i)) ? rss_size * i : 0;
}
hclgevf_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_RSS_TC_MODE, false);
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 099/121] net: mscc: ocelot: dont downgrade timestamping RX filters in SIOCSHWTSTAMP
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (97 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 098/121] net: hns3: fix VF RSS failed problem after PF enable multi-TCs Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 100/121] net: mscc: ocelot: correctly report the timestamping RX filters in ethtool Greg Kroah-Hartman
` (30 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Richard Cochran, Vladimir Oltean,
Jakub Kicinski, Sasha Levin
From: Vladimir Oltean <vladimir.oltean@nxp.com>
[ Upstream commit 8a075464d1e9317ffae0973dfe538a7511291a06 ]
The ocelot driver, when asked to timestamp all receiving packets, 1588
v1 or NTP, says "nah, here's 1588 v2 for you".
According to this discussion:
https://patchwork.kernel.org/project/netdevbpf/patch/20211104133204.19757-8-martin.kaistra@linutronix.de/#24577647
drivers that downgrade from a wider request to a narrower response (or
even a response where the intersection with the request is empty) are
buggy, and should return -ERANGE instead. This patch fixes that.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mscc/ocelot.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 8c45b236649a9..154d67066d012 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -811,12 +811,6 @@ int ocelot_hwstamp_set(struct ocelot *ocelot, int port, struct ifreq *ifr)
switch (cfg.rx_filter) {
case HWTSTAMP_FILTER_NONE:
break;
- case HWTSTAMP_FILTER_ALL:
- case HWTSTAMP_FILTER_SOME:
- case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
- case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
- case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
- case HWTSTAMP_FILTER_NTP_ALL:
case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 100/121] net: mscc: ocelot: correctly report the timestamping RX filters in ethtool
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (98 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 099/121] net: mscc: ocelot: dont downgrade timestamping RX filters in SIOCSHWTSTAMP Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 101/121] tcp: correctly handle increased zerocopy args struct size Greg Kroah-Hartman
` (29 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vladimir Oltean, Jakub Kicinski, Sasha Levin
From: Vladimir Oltean <vladimir.oltean@nxp.com>
[ Upstream commit c49a35eedfef08bffd46b53c25dbf9d6016a86ff ]
The driver doesn't support RX timestamping for non-PTP packets, but it
declares that it does. Restrict the reported RX filters to PTP v2 over
L2 and over L4.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mscc/ocelot.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 154d67066d012..52401915828a1 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -929,7 +929,10 @@ int ocelot_get_ts_info(struct ocelot *ocelot, int port,
SOF_TIMESTAMPING_RAW_HARDWARE;
info->tx_types = BIT(HWTSTAMP_TX_OFF) | BIT(HWTSTAMP_TX_ON) |
BIT(HWTSTAMP_TX_ONESTEP_SYNC);
- info->rx_filters = BIT(HWTSTAMP_FILTER_NONE) | BIT(HWTSTAMP_FILTER_ALL);
+ info->rx_filters = BIT(HWTSTAMP_FILTER_NONE) |
+ BIT(HWTSTAMP_FILTER_PTP_V2_EVENT) |
+ BIT(HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+ BIT(HWTSTAMP_FILTER_PTP_V2_L4_EVENT);
return 0;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 101/121] tcp: correctly handle increased zerocopy args struct size
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (99 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 100/121] net: mscc: ocelot: correctly report the timestamping RX filters in ethtool Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 102/121] sched/scs: Reset task stack state in bringup_cpu() Greg Kroah-Hartman
` (28 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arjun Roy, Eric Dumazet,
Soheil Hassas Yeganeh, David S. Miller, Sasha Levin
From: Arjun Roy <arjunroy@google.com>
[ Upstream commit e0fecb289ad3fd2245cdc50bf450b97fcca39884 ]
A prior patch increased the size of struct tcp_zerocopy_receive
but did not update do_tcp_getsockopt() handling to properly account
for this.
This patch simply reintroduces content erroneously cut from the
referenced prior patch that handles the new struct size.
Fixes: 18fb76ed5386 ("net-zerocopy: Copy straggler unaligned data for TCP Rx. zerocopy.")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/tcp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index bb16c88f58a3c..63c81af41b43e 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -3931,7 +3931,7 @@ static int do_tcp_getsockopt(struct sock *sk, int level,
}
#ifdef CONFIG_MMU
case TCP_ZEROCOPY_RECEIVE: {
- struct tcp_zerocopy_receive zc;
+ struct tcp_zerocopy_receive zc = {};
int err;
if (get_user(len, optlen))
@@ -3949,7 +3949,7 @@ static int do_tcp_getsockopt(struct sock *sk, int level,
lock_sock(sk);
err = tcp_zerocopy_receive(sk, &zc);
release_sock(sk);
- if (len == sizeof(zc))
+ if (len >= offsetofend(struct tcp_zerocopy_receive, err))
goto zerocopy_rcv_sk_err;
switch (len) {
case offsetofend(struct tcp_zerocopy_receive, err):
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 102/121] sched/scs: Reset task stack state in bringup_cpu()
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (100 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 101/121] tcp: correctly handle increased zerocopy args struct size Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 103/121] f2fs: set SBI_NEED_FSCK flag when inconsistent node block found Greg Kroah-Hartman
` (27 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Qian Cai, Mark Rutland,
Peter Zijlstra (Intel),
Valentin Schneider, Sasha Levin
From: Mark Rutland <mark.rutland@arm.com>
[ Upstream commit dce1ca0525bfdc8a69a9343bc714fbc19a2f04b3 ]
To hot unplug a CPU, the idle task on that CPU calls a few layers of C
code before finally leaving the kernel. When KASAN is in use, poisoned
shadow is left around for each of the active stack frames, and when
shadow call stacks are in use. When shadow call stacks (SCS) are in use
the task's saved SCS SP is left pointing at an arbitrary point within
the task's shadow call stack.
When a CPU is offlined than onlined back into the kernel, this stale
state can adversely affect execution. Stale KASAN shadow can alias new
stackframes and result in bogus KASAN warnings. A stale SCS SP is
effectively a memory leak, and prevents a portion of the shadow call
stack being used. Across a number of hotplug cycles the idle task's
entire shadow call stack can become unusable.
We previously fixed the KASAN issue in commit:
e1b77c92981a5222 ("sched/kasan: remove stale KASAN poison after hotplug")
... by removing any stale KASAN stack poison immediately prior to
onlining a CPU.
Subsequently in commit:
f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled")
... the refactoring left the KASAN and SCS cleanup in one-time idle
thread initialization code rather than something invoked prior to each
CPU being onlined, breaking both as above.
We fixed SCS (but not KASAN) in commit:
63acd42c0d4942f7 ("sched/scs: Reset the shadow stack when idle_task_exit")
... but as this runs in the context of the idle task being offlined it's
potentially fragile.
To fix these consistently and more robustly, reset the SCS SP and KASAN
shadow of a CPU's idle task immediately before we online that CPU in
bringup_cpu(). This ensures the idle task always has a consistent state
when it is running, and removes the need to so so when exiting an idle
task.
Whenever any thread is created, dup_task_struct() will give the task a
stack which is free of KASAN shadow, and initialize the task's SCS SP,
so there's no need to specially initialize either for idle thread within
init_idle(), as this was only necessary to handle hotplug cycles.
I've tested this on arm64 with:
* gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK
* clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK
... offlining and onlining CPUS with:
| while true; do
| for C in /sys/devices/system/cpu/cpu*/online; do
| echo 0 > $C;
| echo 1 > $C;
| done
| done
Fixes: f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Link: https://lore.kernel.org/lkml/20211115113310.35693-1-mark.rutland@arm.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/cpu.c | 7 +++++++
kernel/sched/core.c | 4 ----
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 67c22941b5f27..c06ced18f78ad 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -31,6 +31,7 @@
#include <linux/smpboot.h>
#include <linux/relay.h>
#include <linux/slab.h>
+#include <linux/scs.h>
#include <linux/percpu-rwsem.h>
#include <linux/cpuset.h>
@@ -551,6 +552,12 @@ static int bringup_cpu(unsigned int cpu)
struct task_struct *idle = idle_thread_get(cpu);
int ret;
+ /*
+ * Reset stale stack state from the last time this CPU was online.
+ */
+ scs_task_reset(idle);
+ kasan_unpoison_task_stack(idle);
+
/*
* Some architectures have to walk the irq descriptors to
* setup the vector space for the cpu which comes online.
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index e456cce772a3a..304aad997da11 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -6523,9 +6523,6 @@ void __init init_idle(struct task_struct *idle, int cpu)
idle->se.exec_start = sched_clock();
idle->flags |= PF_IDLE;
- scs_task_reset(idle);
- kasan_unpoison_task_stack(idle);
-
#ifdef CONFIG_SMP
/*
* Its possible that init_idle() gets called multiple times on a task,
@@ -6681,7 +6678,6 @@ void idle_task_exit(void)
finish_arch_post_lock_switch();
}
- scs_task_reset(current);
/* finish_cpu(), as ran on the BP, will clean up the active_mm state */
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 103/121] f2fs: set SBI_NEED_FSCK flag when inconsistent node block found
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (101 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 102/121] sched/scs: Reset task stack state in bringup_cpu() Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 104/121] ceph: properly handle statfs on multifs setups Greg Kroah-Hartman
` (26 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Weichao Guo, Chao Yu, Jaegeuk Kim,
Sasha Levin
From: Weichao Guo <guoweichao@oppo.com>
[ Upstream commit 6663b138ded1a59e630c9e605e42aa7fde490cdc ]
Inconsistent node block will cause a file fail to open or read,
which could make the user process crashes or stucks. Let's mark
SBI_NEED_FSCK flag to trigger a fix at next fsck time. After
unlinking the corrupted file, the user process could regenerate
a new one and work correctly.
Signed-off-by: Weichao Guo <guoweichao@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/f2fs/node.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index 597a145c08ef5..7e625806bd4a2 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -1389,6 +1389,7 @@ static struct page *__get_node_page(struct f2fs_sb_info *sbi, pgoff_t nid,
nid, nid_of_node(page), ino_of_node(page),
ofs_of_node(page), cpver_of_node(page),
next_blkaddr_of_node(page));
+ set_sbi_flag(sbi, SBI_NEED_FSCK);
err = -EINVAL;
out_err:
ClearPageUptodate(page);
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 104/121] ceph: properly handle statfs on multifs setups
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (102 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 103/121] f2fs: set SBI_NEED_FSCK flag when inconsistent node block found Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 105/121] smb3: do not error on fsync when readonly Greg Kroah-Hartman
` (25 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sachin Prabhu, Jeff Layton, Xiubo Li,
Ilya Dryomov, Sasha Levin
From: Jeff Layton <jlayton@kernel.org>
[ Upstream commit 8cfc0c7ed34f7929ce7e5d7c6eecf4d01ba89a84 ]
ceph_statfs currently stuffs the cluster fsid into the f_fsid field.
This was fine when we only had a single filesystem per cluster, but now
that we have multiples we need to use something that will vary between
them.
Change ceph_statfs to xor each 32-bit chunk of the fsid (aka cluster id)
into the lower bits of the statfs->f_fsid. Change the lower bits to hold
the fscid (filesystem ID within the cluster).
That should give us a value that is guaranteed to be unique between
filesystems within a cluster, and should minimize the chance of
collisions between mounts of different clusters.
URL: https://tracker.ceph.com/issues/52812
Reported-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ceph/super.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index f33bfb255db8f..08c8d34c98091 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -52,8 +52,7 @@ static int ceph_statfs(struct dentry *dentry, struct kstatfs *buf)
struct ceph_fs_client *fsc = ceph_inode_to_client(d_inode(dentry));
struct ceph_mon_client *monc = &fsc->client->monc;
struct ceph_statfs st;
- u64 fsid;
- int err;
+ int i, err;
u64 data_pool;
if (fsc->mdsc->mdsmap->m_num_data_pg_pools == 1) {
@@ -99,12 +98,14 @@ static int ceph_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_namelen = NAME_MAX;
/* Must convert the fsid, for consistent values across arches */
+ buf->f_fsid.val[0] = 0;
mutex_lock(&monc->mutex);
- fsid = le64_to_cpu(*(__le64 *)(&monc->monmap->fsid)) ^
- le64_to_cpu(*((__le64 *)&monc->monmap->fsid + 1));
+ for (i = 0 ; i < sizeof(monc->monmap->fsid) / sizeof(__le32) ; ++i)
+ buf->f_fsid.val[0] ^= le32_to_cpu(((__le32 *)&monc->monmap->fsid)[i]);
mutex_unlock(&monc->mutex);
- buf->f_fsid = u64_to_fsid(fsid);
+ /* fold the fs_cluster_id into the upper bits */
+ buf->f_fsid.val[1] = monc->fs_cluster_id;
return 0;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 105/121] smb3: do not error on fsync when readonly
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (103 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 104/121] ceph: properly handle statfs on multifs setups Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 106/121] iommu/amd: Clarify AMD IOMMUv2 initialization messages Greg Kroah-Hartman
` (24 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Julian Sikorski, Jeremy Allison,
Paulo Alcantara (SUSE),
Steve French, Sasha Levin
From: Steve French <stfrench@microsoft.com>
[ Upstream commit 71e6864eacbef0b2645ca043cdfbac272cb6cea3 ]
Linux allows doing a flush/fsync on a file open for read-only,
but the protocol does not allow that. If the file passed in
on the flush is read-only try to find a writeable handle for
the same inode, if that is not possible skip sending the
fsync call to the server to avoid breaking the apps.
Reported-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Suggested-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/file.c | 35 +++++++++++++++++++++++++++++------
1 file changed, 29 insertions(+), 6 deletions(-)
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 67139f9d583f2..6c06870f90184 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -2618,12 +2618,23 @@ int cifs_strict_fsync(struct file *file, loff_t start, loff_t end,
tcon = tlink_tcon(smbfile->tlink);
if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NOSSYNC)) {
server = tcon->ses->server;
- if (server->ops->flush)
- rc = server->ops->flush(xid, tcon, &smbfile->fid);
- else
+ if (server->ops->flush == NULL) {
rc = -ENOSYS;
+ goto strict_fsync_exit;
+ }
+
+ if ((OPEN_FMODE(smbfile->f_flags) & FMODE_WRITE) == 0) {
+ smbfile = find_writable_file(CIFS_I(inode), FIND_WR_ANY);
+ if (smbfile) {
+ rc = server->ops->flush(xid, tcon, &smbfile->fid);
+ cifsFileInfo_put(smbfile);
+ } else
+ cifs_dbg(FYI, "ignore fsync for file not open for write\n");
+ } else
+ rc = server->ops->flush(xid, tcon, &smbfile->fid);
}
+strict_fsync_exit:
free_xid(xid);
return rc;
}
@@ -2635,6 +2646,7 @@ int cifs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
struct cifs_tcon *tcon;
struct TCP_Server_Info *server;
struct cifsFileInfo *smbfile = file->private_data;
+ struct inode *inode = file_inode(file);
struct cifs_sb_info *cifs_sb = CIFS_FILE_SB(file);
rc = file_write_and_wait_range(file, start, end);
@@ -2651,12 +2663,23 @@ int cifs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
tcon = tlink_tcon(smbfile->tlink);
if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NOSSYNC)) {
server = tcon->ses->server;
- if (server->ops->flush)
- rc = server->ops->flush(xid, tcon, &smbfile->fid);
- else
+ if (server->ops->flush == NULL) {
rc = -ENOSYS;
+ goto fsync_exit;
+ }
+
+ if ((OPEN_FMODE(smbfile->f_flags) & FMODE_WRITE) == 0) {
+ smbfile = find_writable_file(CIFS_I(inode), FIND_WR_ANY);
+ if (smbfile) {
+ rc = server->ops->flush(xid, tcon, &smbfile->fid);
+ cifsFileInfo_put(smbfile);
+ } else
+ cifs_dbg(FYI, "ignore fsync for file not open for write\n");
+ } else
+ rc = server->ops->flush(xid, tcon, &smbfile->fid);
}
+fsync_exit:
free_xid(xid);
return rc;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 131+ messages in thread* [PATCH 5.10 106/121] iommu/amd: Clarify AMD IOMMUv2 initialization messages
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (104 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 105/121] smb3: do not error on fsync when readonly Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 107/121] vhost/vsock: fix incorrect used length reported to the guest Greg Kroah-Hartman
` (23 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Joerg Roedel
From: Joerg Roedel <jroedel@suse.de>
commit 717e88aad37befedfd531378b632e794e24e9afb upstream.
The messages printed on the initialization of the AMD IOMMUv2 driver
have caused some confusion in the past. Clarify the messages to lower
the confusion in the future.
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20211123105507.7654-3-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iommu/amd/iommu_v2.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/iommu/amd/iommu_v2.c
+++ b/drivers/iommu/amd/iommu_v2.c
@@ -927,10 +927,8 @@ static int __init amd_iommu_v2_init(void
{
int ret;
- pr_info("AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>\n");
-
if (!amd_iommu_v2_supported()) {
- pr_info("AMD IOMMUv2 functionality not available on this system\n");
+ pr_info("AMD IOMMUv2 functionality not available on this system - This is not a bug.\n");
/*
* Load anyway to provide the symbols to other modules
* which may use AMD IOMMUv2 optionally.
@@ -947,6 +945,8 @@ static int __init amd_iommu_v2_init(void
amd_iommu_register_ppr_notifier(&ppr_nb);
+ pr_info("AMD IOMMUv2 loaded and initialized\n");
+
return 0;
out:
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 107/121] vhost/vsock: fix incorrect used length reported to the guest
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (105 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 106/121] iommu/amd: Clarify AMD IOMMUv2 initialization messages Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 5.10 108/121] tracing: Check pid filtering when creating events Greg Kroah-Hartman
` (22 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Halil Pasic, Jason Wang,
Stefano Garzarella, Michael S. Tsirkin, Stefan Hajnoczi
From: Stefano Garzarella <sgarzare@redhat.com>
commit 49d8c5ffad07ca014cfae72a1b9b8c52b6ad9cb8 upstream.
The "used length" reported by calling vhost_add_used() must be the
number of bytes written by the device (using "in" buffers).
In vhost_vsock_handle_tx_kick() the device only reads the guest
buffers (they are all "out" buffers), without writing anything,
so we must pass 0 as "used length" to comply virtio spec.
Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Cc: stable@vger.kernel.org
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211122163525.294024-2-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/vhost/vsock.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -494,7 +494,7 @@ static void vhost_vsock_handle_tx_kick(s
virtio_transport_free_pkt(pkt);
len += sizeof(pkt->hdr);
- vhost_add_used(vq, head, len);
+ vhost_add_used(vq, head, 0);
total_len += len;
added = true;
} while(likely(!vhost_exceeds_weight(vq, ++pkts, total_len)));
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 108/121] tracing: Check pid filtering when creating events
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (106 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 107/121] vhost/vsock: fix incorrect used length reported to the guest Greg Kroah-Hartman
@ 2021-11-29 18:18 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 109/121] xen: sync include/xen/interface/io/ring.h with Xens newest version Greg Kroah-Hartman
` (21 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:18 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Steven Rostedt (VMware)
From: Steven Rostedt (VMware) <rostedt@goodmis.org>
commit 6cb206508b621a9a0a2c35b60540e399225c8243 upstream.
When pid filtering is activated in an instance, all of the events trace
files for that instance has the PID_FILTER flag set. This determines
whether or not pid filtering needs to be done on the event, otherwise the
event is executed as normal.
If pid filtering is enabled when an event is created (via a dynamic event
or modules), its flag is not updated to reflect the current state, and the
events are not filtered properly.
Cc: stable@vger.kernel.org
Fixes: 3fdaf80f4a836 ("tracing: Implement event pid filtering")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/trace_events.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -2462,12 +2462,22 @@ static struct trace_event_file *
trace_create_new_event(struct trace_event_call *call,
struct trace_array *tr)
{
+ struct trace_pid_list *no_pid_list;
+ struct trace_pid_list *pid_list;
struct trace_event_file *file;
file = kmem_cache_alloc(file_cachep, GFP_TRACE);
if (!file)
return NULL;
+ pid_list = rcu_dereference_protected(tr->filtered_pids,
+ lockdep_is_held(&event_mutex));
+ no_pid_list = rcu_dereference_protected(tr->filtered_no_pids,
+ lockdep_is_held(&event_mutex));
+
+ if (pid_list || no_pid_list)
+ file->flags |= EVENT_FILE_FL_PID_FILTER;
+
file->event_call = call;
file->tr = tr;
atomic_set(&file->sm_ref, 0);
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 109/121] xen: sync include/xen/interface/io/ring.h with Xens newest version
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (107 preceding siblings ...)
2021-11-29 18:18 ` [PATCH 5.10 108/121] tracing: Check pid filtering when creating events Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 110/121] xen/blkfront: read response from backend only once Greg Kroah-Hartman
` (20 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Juergen Gross
From: Juergen Gross <jgross@suse.com>
commit 629a5d87e26fe96bcaab44cbb81f5866af6f7008 upstream.
Sync include/xen/interface/io/ring.h with Xen's newest version in
order to get the RING_COPY_RESPONSE() and RING_RESPONSE_PROD_OVERFLOW()
macros.
Note that this will correct the wrong license info by adding the
missing original copyright notice.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/xen/interface/io/ring.h | 280 ++++++++++++++++++++++------------------
1 file changed, 157 insertions(+), 123 deletions(-)
--- a/include/xen/interface/io/ring.h
+++ b/include/xen/interface/io/ring.h
@@ -1,21 +1,53 @@
-/* SPDX-License-Identifier: GPL-2.0 */
/******************************************************************************
* ring.h
*
* Shared producer-consumer ring macros.
*
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
* Tim Deegan and Andrew Warfield November 2004.
*/
#ifndef __XEN_PUBLIC_IO_RING_H__
#define __XEN_PUBLIC_IO_RING_H__
+/*
+ * When #include'ing this header, you need to provide the following
+ * declaration upfront:
+ * - standard integers types (uint8_t, uint16_t, etc)
+ * They are provided by stdint.h of the standard headers.
+ *
+ * In addition, if you intend to use the FLEX macros, you also need to
+ * provide the following, before invoking the FLEX macros:
+ * - size_t
+ * - memcpy
+ * - grant_ref_t
+ * These declarations are provided by string.h of the standard headers,
+ * and grant_table.h from the Xen public headers.
+ */
+
#include <xen/interface/grant_table.h>
typedef unsigned int RING_IDX;
/* Round a 32-bit unsigned constant down to the nearest power of two. */
-#define __RD2(_x) (((_x) & 0x00000002) ? 0x2 : ((_x) & 0x1))
+#define __RD2(_x) (((_x) & 0x00000002) ? 0x2 : ((_x) & 0x1))
#define __RD4(_x) (((_x) & 0x0000000c) ? __RD2((_x)>>2)<<2 : __RD2(_x))
#define __RD8(_x) (((_x) & 0x000000f0) ? __RD4((_x)>>4)<<4 : __RD4(_x))
#define __RD16(_x) (((_x) & 0x0000ff00) ? __RD8((_x)>>8)<<8 : __RD8(_x))
@@ -27,82 +59,79 @@ typedef unsigned int RING_IDX;
* A ring contains as many entries as will fit, rounded down to the nearest
* power of two (so we can mask with (size-1) to loop around).
*/
-#define __CONST_RING_SIZE(_s, _sz) \
- (__RD32(((_sz) - offsetof(struct _s##_sring, ring)) / \
- sizeof(((struct _s##_sring *)0)->ring[0])))
-
+#define __CONST_RING_SIZE(_s, _sz) \
+ (__RD32(((_sz) - offsetof(struct _s##_sring, ring)) / \
+ sizeof(((struct _s##_sring *)0)->ring[0])))
/*
* The same for passing in an actual pointer instead of a name tag.
*/
-#define __RING_SIZE(_s, _sz) \
- (__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
+#define __RING_SIZE(_s, _sz) \
+ (__RD32(((_sz) - (long)(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
/*
* Macros to make the correct C datatypes for a new kind of ring.
*
* To make a new ring datatype, you need to have two message structures,
- * let's say struct request, and struct response already defined.
+ * let's say request_t, and response_t already defined.
*
* In a header where you want the ring datatype declared, you then do:
*
- * DEFINE_RING_TYPES(mytag, struct request, struct response);
+ * DEFINE_RING_TYPES(mytag, request_t, response_t);
*
* These expand out to give you a set of types, as you can see below.
* The most important of these are:
*
- * struct mytag_sring - The shared ring.
- * struct mytag_front_ring - The 'front' half of the ring.
- * struct mytag_back_ring - The 'back' half of the ring.
+ * mytag_sring_t - The shared ring.
+ * mytag_front_ring_t - The 'front' half of the ring.
+ * mytag_back_ring_t - The 'back' half of the ring.
*
* To initialize a ring in your code you need to know the location and size
* of the shared memory area (PAGE_SIZE, for instance). To initialise
* the front half:
*
- * struct mytag_front_ring front_ring;
- * SHARED_RING_INIT((struct mytag_sring *)shared_page);
- * FRONT_RING_INIT(&front_ring, (struct mytag_sring *)shared_page,
- * PAGE_SIZE);
+ * mytag_front_ring_t front_ring;
+ * SHARED_RING_INIT((mytag_sring_t *)shared_page);
+ * FRONT_RING_INIT(&front_ring, (mytag_sring_t *)shared_page, PAGE_SIZE);
*
* Initializing the back follows similarly (note that only the front
* initializes the shared ring):
*
- * struct mytag_back_ring back_ring;
- * BACK_RING_INIT(&back_ring, (struct mytag_sring *)shared_page,
- * PAGE_SIZE);
+ * mytag_back_ring_t back_ring;
+ * BACK_RING_INIT(&back_ring, (mytag_sring_t *)shared_page, PAGE_SIZE);
*/
-#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t) \
- \
-/* Shared ring entry */ \
-union __name##_sring_entry { \
- __req_t req; \
- __rsp_t rsp; \
-}; \
- \
-/* Shared ring page */ \
-struct __name##_sring { \
- RING_IDX req_prod, req_event; \
- RING_IDX rsp_prod, rsp_event; \
- uint8_t pad[48]; \
- union __name##_sring_entry ring[1]; /* variable-length */ \
-}; \
- \
-/* "Front" end's private variables */ \
-struct __name##_front_ring { \
- RING_IDX req_prod_pvt; \
- RING_IDX rsp_cons; \
- unsigned int nr_ents; \
- struct __name##_sring *sring; \
-}; \
- \
-/* "Back" end's private variables */ \
-struct __name##_back_ring { \
- RING_IDX rsp_prod_pvt; \
- RING_IDX req_cons; \
- unsigned int nr_ents; \
- struct __name##_sring *sring; \
-};
-
+#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t) \
+ \
+/* Shared ring entry */ \
+union __name##_sring_entry { \
+ __req_t req; \
+ __rsp_t rsp; \
+}; \
+ \
+/* Shared ring page */ \
+struct __name##_sring { \
+ RING_IDX req_prod, req_event; \
+ RING_IDX rsp_prod, rsp_event; \
+ uint8_t __pad[48]; \
+ union __name##_sring_entry ring[1]; /* variable-length */ \
+}; \
+ \
+/* "Front" end's private variables */ \
+struct __name##_front_ring { \
+ RING_IDX req_prod_pvt; \
+ RING_IDX rsp_cons; \
+ unsigned int nr_ents; \
+ struct __name##_sring *sring; \
+}; \
+ \
+/* "Back" end's private variables */ \
+struct __name##_back_ring { \
+ RING_IDX rsp_prod_pvt; \
+ RING_IDX req_cons; \
+ unsigned int nr_ents; \
+ struct __name##_sring *sring; \
+}; \
+ \
/*
* Macros for manipulating rings.
*
@@ -119,94 +148,99 @@ struct __name##_back_ring { \
*/
/* Initialising empty rings */
-#define SHARED_RING_INIT(_s) do { \
- (_s)->req_prod = (_s)->rsp_prod = 0; \
- (_s)->req_event = (_s)->rsp_event = 1; \
- memset((_s)->pad, 0, sizeof((_s)->pad)); \
+#define SHARED_RING_INIT(_s) do { \
+ (_s)->req_prod = (_s)->rsp_prod = 0; \
+ (_s)->req_event = (_s)->rsp_event = 1; \
+ (void)memset((_s)->__pad, 0, sizeof((_s)->__pad)); \
} while(0)
-#define FRONT_RING_ATTACH(_r, _s, _i, __size) do { \
- (_r)->req_prod_pvt = (_i); \
- (_r)->rsp_cons = (_i); \
- (_r)->nr_ents = __RING_SIZE(_s, __size); \
- (_r)->sring = (_s); \
+#define FRONT_RING_ATTACH(_r, _s, _i, __size) do { \
+ (_r)->req_prod_pvt = (_i); \
+ (_r)->rsp_cons = (_i); \
+ (_r)->nr_ents = __RING_SIZE(_s, __size); \
+ (_r)->sring = (_s); \
} while (0)
#define FRONT_RING_INIT(_r, _s, __size) FRONT_RING_ATTACH(_r, _s, 0, __size)
-#define BACK_RING_ATTACH(_r, _s, _i, __size) do { \
- (_r)->rsp_prod_pvt = (_i); \
- (_r)->req_cons = (_i); \
- (_r)->nr_ents = __RING_SIZE(_s, __size); \
- (_r)->sring = (_s); \
+#define BACK_RING_ATTACH(_r, _s, _i, __size) do { \
+ (_r)->rsp_prod_pvt = (_i); \
+ (_r)->req_cons = (_i); \
+ (_r)->nr_ents = __RING_SIZE(_s, __size); \
+ (_r)->sring = (_s); \
} while (0)
#define BACK_RING_INIT(_r, _s, __size) BACK_RING_ATTACH(_r, _s, 0, __size)
/* How big is this ring? */
-#define RING_SIZE(_r) \
+#define RING_SIZE(_r) \
((_r)->nr_ents)
/* Number of free requests (for use on front side only). */
-#define RING_FREE_REQUESTS(_r) \
+#define RING_FREE_REQUESTS(_r) \
(RING_SIZE(_r) - ((_r)->req_prod_pvt - (_r)->rsp_cons))
/* Test if there is an empty slot available on the front ring.
* (This is only meaningful from the front. )
*/
-#define RING_FULL(_r) \
+#define RING_FULL(_r) \
(RING_FREE_REQUESTS(_r) == 0)
/* Test if there are outstanding messages to be processed on a ring. */
-#define RING_HAS_UNCONSUMED_RESPONSES(_r) \
+#define RING_HAS_UNCONSUMED_RESPONSES(_r) \
((_r)->sring->rsp_prod - (_r)->rsp_cons)
-#define RING_HAS_UNCONSUMED_REQUESTS(_r) \
- ({ \
- unsigned int req = (_r)->sring->req_prod - (_r)->req_cons; \
- unsigned int rsp = RING_SIZE(_r) - \
- ((_r)->req_cons - (_r)->rsp_prod_pvt); \
- req < rsp ? req : rsp; \
- })
+#define RING_HAS_UNCONSUMED_REQUESTS(_r) ({ \
+ unsigned int req = (_r)->sring->req_prod - (_r)->req_cons; \
+ unsigned int rsp = RING_SIZE(_r) - \
+ ((_r)->req_cons - (_r)->rsp_prod_pvt); \
+ req < rsp ? req : rsp; \
+})
/* Direct access to individual ring elements, by index. */
-#define RING_GET_REQUEST(_r, _idx) \
+#define RING_GET_REQUEST(_r, _idx) \
(&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].req))
+#define RING_GET_RESPONSE(_r, _idx) \
+ (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
+
/*
- * Get a local copy of a request.
+ * Get a local copy of a request/response.
*
- * Use this in preference to RING_GET_REQUEST() so all processing is
+ * Use this in preference to RING_GET_{REQUEST,RESPONSE}() so all processing is
* done on a local copy that cannot be modified by the other end.
*
* Note that https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 may cause this
- * to be ineffective where _req is a struct which consists of only bitfields.
+ * to be ineffective where dest is a struct which consists of only bitfields.
*/
-#define RING_COPY_REQUEST(_r, _idx, _req) do { \
- /* Use volatile to force the copy into _req. */ \
- *(_req) = *(volatile typeof(_req))RING_GET_REQUEST(_r, _idx); \
+#define RING_COPY_(type, r, idx, dest) do { \
+ /* Use volatile to force the copy into dest. */ \
+ *(dest) = *(volatile typeof(dest))RING_GET_##type(r, idx); \
} while (0)
-#define RING_GET_RESPONSE(_r, _idx) \
- (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
+#define RING_COPY_REQUEST(r, idx, req) RING_COPY_(REQUEST, r, idx, req)
+#define RING_COPY_RESPONSE(r, idx, rsp) RING_COPY_(RESPONSE, r, idx, rsp)
/* Loop termination condition: Would the specified index overflow the ring? */
-#define RING_REQUEST_CONS_OVERFLOW(_r, _cons) \
+#define RING_REQUEST_CONS_OVERFLOW(_r, _cons) \
(((_cons) - (_r)->rsp_prod_pvt) >= RING_SIZE(_r))
/* Ill-behaved frontend determination: Can there be this many requests? */
-#define RING_REQUEST_PROD_OVERFLOW(_r, _prod) \
+#define RING_REQUEST_PROD_OVERFLOW(_r, _prod) \
(((_prod) - (_r)->rsp_prod_pvt) > RING_SIZE(_r))
-
-#define RING_PUSH_REQUESTS(_r) do { \
- virt_wmb(); /* back sees requests /before/ updated producer index */ \
- (_r)->sring->req_prod = (_r)->req_prod_pvt; \
+/* Ill-behaved backend determination: Can there be this many responses? */
+#define RING_RESPONSE_PROD_OVERFLOW(_r, _prod) \
+ (((_prod) - (_r)->rsp_cons) > RING_SIZE(_r))
+
+#define RING_PUSH_REQUESTS(_r) do { \
+ virt_wmb(); /* back sees requests /before/ updated producer index */\
+ (_r)->sring->req_prod = (_r)->req_prod_pvt; \
} while (0)
-#define RING_PUSH_RESPONSES(_r) do { \
- virt_wmb(); /* front sees responses /before/ updated producer index */ \
- (_r)->sring->rsp_prod = (_r)->rsp_prod_pvt; \
+#define RING_PUSH_RESPONSES(_r) do { \
+ virt_wmb(); /* front sees resps /before/ updated producer index */ \
+ (_r)->sring->rsp_prod = (_r)->rsp_prod_pvt; \
} while (0)
/*
@@ -239,40 +273,40 @@ struct __name##_back_ring { \
* field appropriately.
*/
-#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do { \
- RING_IDX __old = (_r)->sring->req_prod; \
- RING_IDX __new = (_r)->req_prod_pvt; \
- virt_wmb(); /* back sees requests /before/ updated producer index */ \
- (_r)->sring->req_prod = __new; \
- virt_mb(); /* back sees new requests /before/ we check req_event */ \
- (_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) < \
- (RING_IDX)(__new - __old)); \
+#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do { \
+ RING_IDX __old = (_r)->sring->req_prod; \
+ RING_IDX __new = (_r)->req_prod_pvt; \
+ virt_wmb(); /* back sees requests /before/ updated producer index */\
+ (_r)->sring->req_prod = __new; \
+ virt_mb(); /* back sees new requests /before/ we check req_event */ \
+ (_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) < \
+ (RING_IDX)(__new - __old)); \
} while (0)
-#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do { \
- RING_IDX __old = (_r)->sring->rsp_prod; \
- RING_IDX __new = (_r)->rsp_prod_pvt; \
- virt_wmb(); /* front sees responses /before/ updated producer index */ \
- (_r)->sring->rsp_prod = __new; \
- virt_mb(); /* front sees new responses /before/ we check rsp_event */ \
- (_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) < \
- (RING_IDX)(__new - __old)); \
+#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do { \
+ RING_IDX __old = (_r)->sring->rsp_prod; \
+ RING_IDX __new = (_r)->rsp_prod_pvt; \
+ virt_wmb(); /* front sees resps /before/ updated producer index */ \
+ (_r)->sring->rsp_prod = __new; \
+ virt_mb(); /* front sees new resps /before/ we check rsp_event */ \
+ (_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) < \
+ (RING_IDX)(__new - __old)); \
} while (0)
-#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do { \
- (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \
- if (_work_to_do) break; \
- (_r)->sring->req_event = (_r)->req_cons + 1; \
- virt_mb(); \
- (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \
+#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do { \
+ (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \
+ if (_work_to_do) break; \
+ (_r)->sring->req_event = (_r)->req_cons + 1; \
+ virt_mb(); \
+ (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \
} while (0)
-#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do { \
- (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \
- if (_work_to_do) break; \
- (_r)->sring->rsp_event = (_r)->rsp_cons + 1; \
- virt_mb(); \
- (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \
+#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do { \
+ (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \
+ if (_work_to_do) break; \
+ (_r)->sring->rsp_event = (_r)->rsp_cons + 1; \
+ virt_mb(); \
+ (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \
} while (0)
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 110/121] xen/blkfront: read response from backend only once
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (108 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 109/121] xen: sync include/xen/interface/io/ring.h with Xens newest version Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 111/121] xen/blkfront: dont take local copy of a request from the ring page Greg Kroah-Hartman
` (19 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich,
Roger Pau Monné
From: Juergen Gross <jgross@suse.com>
commit 71b66243f9898d0e54296b4e7035fb33cdcb0707 upstream.
In order to avoid problems in case the backend is modifying a response
on the ring page while the frontend has already seen it, just read the
response into a local buffer in one go and then operate on that buffer
only.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210730103854.12681-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/xen-blkfront.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1557,7 +1557,7 @@ static bool blkif_completion(unsigned lo
static irqreturn_t blkif_interrupt(int irq, void *dev_id)
{
struct request *req;
- struct blkif_response *bret;
+ struct blkif_response bret;
RING_IDX i, rp;
unsigned long flags;
struct blkfront_ring_info *rinfo = (struct blkfront_ring_info *)dev_id;
@@ -1574,8 +1574,9 @@ static irqreturn_t blkif_interrupt(int i
for (i = rinfo->ring.rsp_cons; i != rp; i++) {
unsigned long id;
- bret = RING_GET_RESPONSE(&rinfo->ring, i);
- id = bret->id;
+ RING_COPY_RESPONSE(&rinfo->ring, i, &bret);
+ id = bret.id;
+
/*
* The backend has messed up and given us an id that we would
* never have given to it (we stamp it up to BLK_RING_SIZE -
@@ -1583,39 +1584,39 @@ static irqreturn_t blkif_interrupt(int i
*/
if (id >= BLK_RING_SIZE(info)) {
WARN(1, "%s: response to %s has incorrect id (%ld)\n",
- info->gd->disk_name, op_name(bret->operation), id);
+ info->gd->disk_name, op_name(bret.operation), id);
/* We can't safely get the 'struct request' as
* the id is busted. */
continue;
}
req = rinfo->shadow[id].request;
- if (bret->operation != BLKIF_OP_DISCARD) {
+ if (bret.operation != BLKIF_OP_DISCARD) {
/*
* We may need to wait for an extra response if the
* I/O request is split in 2
*/
- if (!blkif_completion(&id, rinfo, bret))
+ if (!blkif_completion(&id, rinfo, &bret))
continue;
}
if (add_id_to_freelist(rinfo, id)) {
WARN(1, "%s: response to %s (id %ld) couldn't be recycled!\n",
- info->gd->disk_name, op_name(bret->operation), id);
+ info->gd->disk_name, op_name(bret.operation), id);
continue;
}
- if (bret->status == BLKIF_RSP_OKAY)
+ if (bret.status == BLKIF_RSP_OKAY)
blkif_req(req)->error = BLK_STS_OK;
else
blkif_req(req)->error = BLK_STS_IOERR;
- switch (bret->operation) {
+ switch (bret.operation) {
case BLKIF_OP_DISCARD:
- if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
+ if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
struct request_queue *rq = info->rq;
printk(KERN_WARNING "blkfront: %s: %s op failed\n",
- info->gd->disk_name, op_name(bret->operation));
+ info->gd->disk_name, op_name(bret.operation));
blkif_req(req)->error = BLK_STS_NOTSUPP;
info->feature_discard = 0;
info->feature_secdiscard = 0;
@@ -1625,15 +1626,15 @@ static irqreturn_t blkif_interrupt(int i
break;
case BLKIF_OP_FLUSH_DISKCACHE:
case BLKIF_OP_WRITE_BARRIER:
- if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
+ if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
printk(KERN_WARNING "blkfront: %s: %s op failed\n",
- info->gd->disk_name, op_name(bret->operation));
+ info->gd->disk_name, op_name(bret.operation));
blkif_req(req)->error = BLK_STS_NOTSUPP;
}
- if (unlikely(bret->status == BLKIF_RSP_ERROR &&
+ if (unlikely(bret.status == BLKIF_RSP_ERROR &&
rinfo->shadow[id].req.u.rw.nr_segments == 0)) {
printk(KERN_WARNING "blkfront: %s: empty %s op failed\n",
- info->gd->disk_name, op_name(bret->operation));
+ info->gd->disk_name, op_name(bret.operation));
blkif_req(req)->error = BLK_STS_NOTSUPP;
}
if (unlikely(blkif_req(req)->error)) {
@@ -1646,9 +1647,9 @@ static irqreturn_t blkif_interrupt(int i
fallthrough;
case BLKIF_OP_READ:
case BLKIF_OP_WRITE:
- if (unlikely(bret->status != BLKIF_RSP_OKAY))
+ if (unlikely(bret.status != BLKIF_RSP_OKAY))
dev_dbg(&info->xbdev->dev, "Bad return from blkdev data "
- "request: %x\n", bret->status);
+ "request: %x\n", bret.status);
break;
default:
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 111/121] xen/blkfront: dont take local copy of a request from the ring page
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (109 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 110/121] xen/blkfront: read response from backend only once Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 112/121] xen/blkfront: dont trust the backend response data blindly Greg Kroah-Hartman
` (18 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich,
Roger Pau Monné
From: Juergen Gross <jgross@suse.com>
commit 8f5a695d99000fc3aa73934d7ced33cfc64dcdab upstream.
In order to avoid a malicious backend being able to influence the local
copy of a request build the request locally first and then copy it to
the ring page instead of doing it the other way round as today.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210730103854.12681-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/xen-blkfront.c | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -546,7 +546,7 @@ static unsigned long blkif_ring_get_requ
rinfo->shadow[id].status = REQ_WAITING;
rinfo->shadow[id].associated_id = NO_ASSOCIATED_ID;
- (*ring_req)->u.rw.id = id;
+ rinfo->shadow[id].req.u.rw.id = id;
return id;
}
@@ -554,11 +554,12 @@ static unsigned long blkif_ring_get_requ
static int blkif_queue_discard_req(struct request *req, struct blkfront_ring_info *rinfo)
{
struct blkfront_info *info = rinfo->dev_info;
- struct blkif_request *ring_req;
+ struct blkif_request *ring_req, *final_ring_req;
unsigned long id;
/* Fill out a communications ring structure. */
- id = blkif_ring_get_request(rinfo, req, &ring_req);
+ id = blkif_ring_get_request(rinfo, req, &final_ring_req);
+ ring_req = &rinfo->shadow[id].req;
ring_req->operation = BLKIF_OP_DISCARD;
ring_req->u.discard.nr_sectors = blk_rq_sectors(req);
@@ -569,8 +570,8 @@ static int blkif_queue_discard_req(struc
else
ring_req->u.discard.flag = 0;
- /* Keep a private copy so we can reissue requests when recovering. */
- rinfo->shadow[id].req = *ring_req;
+ /* Copy the request to the ring page. */
+ *final_ring_req = *ring_req;
return 0;
}
@@ -703,6 +704,7 @@ static int blkif_queue_rw_req(struct req
{
struct blkfront_info *info = rinfo->dev_info;
struct blkif_request *ring_req, *extra_ring_req = NULL;
+ struct blkif_request *final_ring_req, *final_extra_ring_req = NULL;
unsigned long id, extra_id = NO_ASSOCIATED_ID;
bool require_extra_req = false;
int i;
@@ -747,7 +749,8 @@ static int blkif_queue_rw_req(struct req
}
/* Fill out a communications ring structure. */
- id = blkif_ring_get_request(rinfo, req, &ring_req);
+ id = blkif_ring_get_request(rinfo, req, &final_ring_req);
+ ring_req = &rinfo->shadow[id].req;
num_sg = blk_rq_map_sg(req->q, req, rinfo->shadow[id].sg);
num_grant = 0;
@@ -798,7 +801,9 @@ static int blkif_queue_rw_req(struct req
ring_req->u.rw.nr_segments = num_grant;
if (unlikely(require_extra_req)) {
extra_id = blkif_ring_get_request(rinfo, req,
- &extra_ring_req);
+ &final_extra_ring_req);
+ extra_ring_req = &rinfo->shadow[extra_id].req;
+
/*
* Only the first request contains the scatter-gather
* list.
@@ -840,10 +845,10 @@ static int blkif_queue_rw_req(struct req
if (setup.segments)
kunmap_atomic(setup.segments);
- /* Keep a private copy so we can reissue requests when recovering. */
- rinfo->shadow[id].req = *ring_req;
+ /* Copy request(s) to the ring page. */
+ *final_ring_req = *ring_req;
if (unlikely(require_extra_req))
- rinfo->shadow[extra_id].req = *extra_ring_req;
+ *final_extra_ring_req = *extra_ring_req;
if (new_persistent_gnts)
gnttab_free_grant_references(setup.gref_head);
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 112/121] xen/blkfront: dont trust the backend response data blindly
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (110 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 111/121] xen/blkfront: dont take local copy of a request from the ring page Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 113/121] xen/netfront: read response from backend only once Greg Kroah-Hartman
` (17 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich,
Roger Pau Monné
From: Juergen Gross <jgross@suse.com>
commit b94e4b147fd1992ad450e1fea1fdaa3738753373 upstream.
Today blkfront will trust the backend to send only sane response data.
In order to avoid privilege escalations or crashes in case of malicious
backends verify the data to be within expected limits. Especially make
sure that the response always references an outstanding request.
Introduce a new state of the ring BLKIF_STATE_ERROR which will be
switched to in case an inconsistency is being detected. Recovering from
this state is possible only via removing and adding the virtual device
again (e.g. via a suspend/resume cycle).
Make all warning messages issued due to valid error responses rate
limited in order to avoid message floods being triggered by a malicious
backend.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210730103854.12681-4-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/xen-blkfront.c | 70 ++++++++++++++++++++++++++++++++-----------
1 file changed, 53 insertions(+), 17 deletions(-)
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -80,6 +80,7 @@ enum blkif_state {
BLKIF_STATE_DISCONNECTED,
BLKIF_STATE_CONNECTED,
BLKIF_STATE_SUSPENDED,
+ BLKIF_STATE_ERROR,
};
struct grant {
@@ -89,6 +90,7 @@ struct grant {
};
enum blk_req_status {
+ REQ_PROCESSING,
REQ_WAITING,
REQ_DONE,
REQ_ERROR,
@@ -543,7 +545,7 @@ static unsigned long blkif_ring_get_requ
id = get_id_from_freelist(rinfo);
rinfo->shadow[id].request = req;
- rinfo->shadow[id].status = REQ_WAITING;
+ rinfo->shadow[id].status = REQ_PROCESSING;
rinfo->shadow[id].associated_id = NO_ASSOCIATED_ID;
rinfo->shadow[id].req.u.rw.id = id;
@@ -572,6 +574,7 @@ static int blkif_queue_discard_req(struc
/* Copy the request to the ring page. */
*final_ring_req = *ring_req;
+ rinfo->shadow[id].status = REQ_WAITING;
return 0;
}
@@ -847,8 +850,11 @@ static int blkif_queue_rw_req(struct req
/* Copy request(s) to the ring page. */
*final_ring_req = *ring_req;
- if (unlikely(require_extra_req))
+ rinfo->shadow[id].status = REQ_WAITING;
+ if (unlikely(require_extra_req)) {
*final_extra_ring_req = *extra_ring_req;
+ rinfo->shadow[extra_id].status = REQ_WAITING;
+ }
if (new_persistent_gnts)
gnttab_free_grant_references(setup.gref_head);
@@ -1420,8 +1426,8 @@ static enum blk_req_status blkif_rsp_to_
static int blkif_get_final_status(enum blk_req_status s1,
enum blk_req_status s2)
{
- BUG_ON(s1 == REQ_WAITING);
- BUG_ON(s2 == REQ_WAITING);
+ BUG_ON(s1 < REQ_DONE);
+ BUG_ON(s2 < REQ_DONE);
if (s1 == REQ_ERROR || s2 == REQ_ERROR)
return BLKIF_RSP_ERROR;
@@ -1454,7 +1460,7 @@ static bool blkif_completion(unsigned lo
s->status = blkif_rsp_to_req_status(bret->status);
/* Wait the second response if not yet here. */
- if (s2->status == REQ_WAITING)
+ if (s2->status < REQ_DONE)
return false;
bret->status = blkif_get_final_status(s->status,
@@ -1573,11 +1579,17 @@ static irqreturn_t blkif_interrupt(int i
spin_lock_irqsave(&rinfo->ring_lock, flags);
again:
- rp = rinfo->ring.sring->rsp_prod;
- rmb(); /* Ensure we see queued responses up to 'rp'. */
+ rp = READ_ONCE(rinfo->ring.sring->rsp_prod);
+ virt_rmb(); /* Ensure we see queued responses up to 'rp'. */
+ if (RING_RESPONSE_PROD_OVERFLOW(&rinfo->ring, rp)) {
+ pr_alert("%s: illegal number of responses %u\n",
+ info->gd->disk_name, rp - rinfo->ring.rsp_cons);
+ goto err;
+ }
for (i = rinfo->ring.rsp_cons; i != rp; i++) {
unsigned long id;
+ unsigned int op;
RING_COPY_RESPONSE(&rinfo->ring, i, &bret);
id = bret.id;
@@ -1588,14 +1600,28 @@ static irqreturn_t blkif_interrupt(int i
* look in get_id_from_freelist.
*/
if (id >= BLK_RING_SIZE(info)) {
- WARN(1, "%s: response to %s has incorrect id (%ld)\n",
- info->gd->disk_name, op_name(bret.operation), id);
- /* We can't safely get the 'struct request' as
- * the id is busted. */
- continue;
+ pr_alert("%s: response has incorrect id (%ld)\n",
+ info->gd->disk_name, id);
+ goto err;
+ }
+ if (rinfo->shadow[id].status != REQ_WAITING) {
+ pr_alert("%s: response references no pending request\n",
+ info->gd->disk_name);
+ goto err;
}
+
+ rinfo->shadow[id].status = REQ_PROCESSING;
req = rinfo->shadow[id].request;
+ op = rinfo->shadow[id].req.operation;
+ if (op == BLKIF_OP_INDIRECT)
+ op = rinfo->shadow[id].req.u.indirect.indirect_op;
+ if (bret.operation != op) {
+ pr_alert("%s: response has wrong operation (%u instead of %u)\n",
+ info->gd->disk_name, bret.operation, op);
+ goto err;
+ }
+
if (bret.operation != BLKIF_OP_DISCARD) {
/*
* We may need to wait for an extra response if the
@@ -1620,7 +1646,8 @@ static irqreturn_t blkif_interrupt(int i
case BLKIF_OP_DISCARD:
if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
struct request_queue *rq = info->rq;
- printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+
+ pr_warn_ratelimited("blkfront: %s: %s op failed\n",
info->gd->disk_name, op_name(bret.operation));
blkif_req(req)->error = BLK_STS_NOTSUPP;
info->feature_discard = 0;
@@ -1632,13 +1659,13 @@ static irqreturn_t blkif_interrupt(int i
case BLKIF_OP_FLUSH_DISKCACHE:
case BLKIF_OP_WRITE_BARRIER:
if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
- printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+ pr_warn_ratelimited("blkfront: %s: %s op failed\n",
info->gd->disk_name, op_name(bret.operation));
blkif_req(req)->error = BLK_STS_NOTSUPP;
}
if (unlikely(bret.status == BLKIF_RSP_ERROR &&
rinfo->shadow[id].req.u.rw.nr_segments == 0)) {
- printk(KERN_WARNING "blkfront: %s: empty %s op failed\n",
+ pr_warn_ratelimited("blkfront: %s: empty %s op failed\n",
info->gd->disk_name, op_name(bret.operation));
blkif_req(req)->error = BLK_STS_NOTSUPP;
}
@@ -1653,8 +1680,9 @@ static irqreturn_t blkif_interrupt(int i
case BLKIF_OP_READ:
case BLKIF_OP_WRITE:
if (unlikely(bret.status != BLKIF_RSP_OKAY))
- dev_dbg(&info->xbdev->dev, "Bad return from blkdev data "
- "request: %x\n", bret.status);
+ dev_dbg_ratelimited(&info->xbdev->dev,
+ "Bad return from blkdev data request: %#x\n",
+ bret.status);
break;
default:
@@ -1680,6 +1708,14 @@ static irqreturn_t blkif_interrupt(int i
spin_unlock_irqrestore(&rinfo->ring_lock, flags);
return IRQ_HANDLED;
+
+ err:
+ info->connected = BLKIF_STATE_ERROR;
+
+ spin_unlock_irqrestore(&rinfo->ring_lock, flags);
+
+ pr_alert("%s disabled for further use\n", info->gd->disk_name);
+ return IRQ_HANDLED;
}
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 113/121] xen/netfront: read response from backend only once
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (111 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 112/121] xen/blkfront: dont trust the backend response data blindly Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 114/121] xen/netfront: dont read data from request on the ring page Greg Kroah-Hartman
` (16 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich, David S. Miller
From: Juergen Gross <jgross@suse.com>
commit 8446066bf8c1f9f7b7412c43fbea0fb87464d75b upstream.
In order to avoid problems in case the backend is modifying a response
on the ring page while the frontend has already seen it, just read the
response into a local buffer in one go and then operate on that buffer
only.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netfront.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -399,13 +399,13 @@ static void xennet_tx_buf_gc(struct netf
rmb(); /* Ensure we see responses up to 'rp'. */
for (cons = queue->tx.rsp_cons; cons != prod; cons++) {
- struct xen_netif_tx_response *txrsp;
+ struct xen_netif_tx_response txrsp;
- txrsp = RING_GET_RESPONSE(&queue->tx, cons);
- if (txrsp->status == XEN_NETIF_RSP_NULL)
+ RING_COPY_RESPONSE(&queue->tx, cons, &txrsp);
+ if (txrsp.status == XEN_NETIF_RSP_NULL)
continue;
- id = txrsp->id;
+ id = txrsp.id;
skb = queue->tx_skbs[id].skb;
if (unlikely(gnttab_query_foreign_access(
queue->grant_tx_ref[id]) != 0)) {
@@ -816,7 +816,7 @@ static int xennet_get_extras(struct netf
RING_IDX rp)
{
- struct xen_netif_extra_info *extra;
+ struct xen_netif_extra_info extra;
struct device *dev = &queue->info->netdev->dev;
RING_IDX cons = queue->rx.rsp_cons;
int err = 0;
@@ -832,24 +832,22 @@ static int xennet_get_extras(struct netf
break;
}
- extra = (struct xen_netif_extra_info *)
- RING_GET_RESPONSE(&queue->rx, ++cons);
+ RING_COPY_RESPONSE(&queue->rx, ++cons, &extra);
- if (unlikely(!extra->type ||
- extra->type >= XEN_NETIF_EXTRA_TYPE_MAX)) {
+ if (unlikely(!extra.type ||
+ extra.type >= XEN_NETIF_EXTRA_TYPE_MAX)) {
if (net_ratelimit())
dev_warn(dev, "Invalid extra type: %d\n",
- extra->type);
+ extra.type);
err = -EINVAL;
} else {
- memcpy(&extras[extra->type - 1], extra,
- sizeof(*extra));
+ extras[extra.type - 1] = extra;
}
skb = xennet_get_rx_skb(queue, cons);
ref = xennet_get_rx_ref(queue, cons);
xennet_move_rx_slot(queue, skb, ref);
- } while (extra->flags & XEN_NETIF_EXTRA_FLAG_MORE);
+ } while (extra.flags & XEN_NETIF_EXTRA_FLAG_MORE);
queue->rx.rsp_cons = cons;
return err;
@@ -907,7 +905,7 @@ static int xennet_get_responses(struct n
struct sk_buff_head *list,
bool *need_xdp_flush)
{
- struct xen_netif_rx_response *rx = &rinfo->rx;
+ struct xen_netif_rx_response *rx = &rinfo->rx, rx_local;
int max = XEN_NETIF_NR_SLOTS_MIN + (rx->status <= RX_COPY_THRESHOLD);
RING_IDX cons = queue->rx.rsp_cons;
struct sk_buff *skb = xennet_get_rx_skb(queue, cons);
@@ -991,7 +989,8 @@ next:
break;
}
- rx = RING_GET_RESPONSE(&queue->rx, cons + slots);
+ RING_COPY_RESPONSE(&queue->rx, cons + slots, &rx_local);
+ rx = &rx_local;
skb = xennet_get_rx_skb(queue, cons + slots);
ref = xennet_get_rx_ref(queue, cons + slots);
slots++;
@@ -1046,10 +1045,11 @@ static int xennet_fill_frags(struct netf
struct sk_buff *nskb;
while ((nskb = __skb_dequeue(list))) {
- struct xen_netif_rx_response *rx =
- RING_GET_RESPONSE(&queue->rx, ++cons);
+ struct xen_netif_rx_response rx;
skb_frag_t *nfrag = &skb_shinfo(nskb)->frags[0];
+ RING_COPY_RESPONSE(&queue->rx, ++cons, &rx);
+
if (skb_shinfo(skb)->nr_frags == MAX_SKB_FRAGS) {
unsigned int pull_to = NETFRONT_SKB_CB(skb)->pull_to;
@@ -1064,7 +1064,7 @@ static int xennet_fill_frags(struct netf
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
skb_frag_page(nfrag),
- rx->offset, rx->status, PAGE_SIZE);
+ rx.offset, rx.status, PAGE_SIZE);
skb_shinfo(nskb)->nr_frags = 0;
kfree_skb(nskb);
@@ -1163,7 +1163,7 @@ static int xennet_poll(struct napi_struc
i = queue->rx.rsp_cons;
work_done = 0;
while ((i != rp) && (work_done < budget)) {
- memcpy(rx, RING_GET_RESPONSE(&queue->rx, i), sizeof(*rx));
+ RING_COPY_RESPONSE(&queue->rx, i, rx);
memset(extras, 0, sizeof(rinfo.extras));
err = xennet_get_responses(queue, &rinfo, rp, &tmpq,
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 114/121] xen/netfront: dont read data from request on the ring page
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (112 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 113/121] xen/netfront: read response from backend only once Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 115/121] xen/netfront: disentangle tx_skb_freelist Greg Kroah-Hartman
` (15 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich, David S. Miller
From: Juergen Gross <jgross@suse.com>
commit 162081ec33c2686afa29d91bf8d302824aa846c7 upstream.
In order to avoid a malicious backend being able to influence the local
processing of a request build the request locally first and then copy
it to the ring page. Any reading from the request influencing the
processing in the frontend needs to be done on the local instance.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netfront.c | 86 +++++++++++++++++++++------------------------
1 file changed, 42 insertions(+), 44 deletions(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -435,7 +435,8 @@ struct xennet_gnttab_make_txreq {
struct netfront_queue *queue;
struct sk_buff *skb;
struct page *page;
- struct xen_netif_tx_request *tx; /* Last request */
+ struct xen_netif_tx_request *tx; /* Last request on ring page */
+ struct xen_netif_tx_request tx_local; /* Last request local copy*/
unsigned int size;
};
@@ -463,30 +464,27 @@ static void xennet_tx_setup_grant(unsign
queue->grant_tx_page[id] = page;
queue->grant_tx_ref[id] = ref;
- tx->id = id;
- tx->gref = ref;
- tx->offset = offset;
- tx->size = len;
- tx->flags = 0;
+ info->tx_local.id = id;
+ info->tx_local.gref = ref;
+ info->tx_local.offset = offset;
+ info->tx_local.size = len;
+ info->tx_local.flags = 0;
+
+ *tx = info->tx_local;
info->tx = tx;
- info->size += tx->size;
+ info->size += info->tx_local.size;
}
static struct xen_netif_tx_request *xennet_make_first_txreq(
- struct netfront_queue *queue, struct sk_buff *skb,
- struct page *page, unsigned int offset, unsigned int len)
+ struct xennet_gnttab_make_txreq *info,
+ unsigned int offset, unsigned int len)
{
- struct xennet_gnttab_make_txreq info = {
- .queue = queue,
- .skb = skb,
- .page = page,
- .size = 0,
- };
+ info->size = 0;
- gnttab_for_one_grant(page, offset, len, xennet_tx_setup_grant, &info);
+ gnttab_for_one_grant(info->page, offset, len, xennet_tx_setup_grant, info);
- return info.tx;
+ return info->tx;
}
static void xennet_make_one_txreq(unsigned long gfn, unsigned int offset,
@@ -499,35 +497,27 @@ static void xennet_make_one_txreq(unsign
xennet_tx_setup_grant(gfn, offset, len, data);
}
-static struct xen_netif_tx_request *xennet_make_txreqs(
- struct netfront_queue *queue, struct xen_netif_tx_request *tx,
- struct sk_buff *skb, struct page *page,
+static void xennet_make_txreqs(
+ struct xennet_gnttab_make_txreq *info,
+ struct page *page,
unsigned int offset, unsigned int len)
{
- struct xennet_gnttab_make_txreq info = {
- .queue = queue,
- .skb = skb,
- .tx = tx,
- };
-
/* Skip unused frames from start of page */
page += offset >> PAGE_SHIFT;
offset &= ~PAGE_MASK;
while (len) {
- info.page = page;
- info.size = 0;
+ info->page = page;
+ info->size = 0;
gnttab_foreach_grant_in_range(page, offset, len,
xennet_make_one_txreq,
- &info);
+ info);
page++;
offset = 0;
- len -= info.size;
+ len -= info->size;
}
-
- return info.tx;
}
/*
@@ -580,10 +570,14 @@ static int xennet_xdp_xmit_one(struct ne
{
struct netfront_info *np = netdev_priv(dev);
struct netfront_stats *tx_stats = this_cpu_ptr(np->tx_stats);
+ struct xennet_gnttab_make_txreq info = {
+ .queue = queue,
+ .skb = NULL,
+ .page = virt_to_page(xdpf->data),
+ };
int notify;
- xennet_make_first_txreq(queue, NULL,
- virt_to_page(xdpf->data),
+ xennet_make_first_txreq(&info,
offset_in_page(xdpf->data),
xdpf->len);
@@ -640,7 +634,7 @@ static netdev_tx_t xennet_start_xmit(str
{
struct netfront_info *np = netdev_priv(dev);
struct netfront_stats *tx_stats = this_cpu_ptr(np->tx_stats);
- struct xen_netif_tx_request *tx, *first_tx;
+ struct xen_netif_tx_request *first_tx;
unsigned int i;
int notify;
int slots;
@@ -649,6 +643,7 @@ static netdev_tx_t xennet_start_xmit(str
unsigned int len;
unsigned long flags;
struct netfront_queue *queue = NULL;
+ struct xennet_gnttab_make_txreq info = { };
unsigned int num_queues = dev->real_num_tx_queues;
u16 queue_index;
struct sk_buff *nskb;
@@ -706,21 +701,24 @@ static netdev_tx_t xennet_start_xmit(str
}
/* First request for the linear area. */
- first_tx = tx = xennet_make_first_txreq(queue, skb,
- page, offset, len);
- offset += tx->size;
+ info.queue = queue;
+ info.skb = skb;
+ info.page = page;
+ first_tx = xennet_make_first_txreq(&info, offset, len);
+ offset += info.tx_local.size;
if (offset == PAGE_SIZE) {
page++;
offset = 0;
}
- len -= tx->size;
+ len -= info.tx_local.size;
if (skb->ip_summed == CHECKSUM_PARTIAL)
/* local packet? */
- tx->flags |= XEN_NETTXF_csum_blank | XEN_NETTXF_data_validated;
+ first_tx->flags |= XEN_NETTXF_csum_blank |
+ XEN_NETTXF_data_validated;
else if (skb->ip_summed == CHECKSUM_UNNECESSARY)
/* remote but checksummed. */
- tx->flags |= XEN_NETTXF_data_validated;
+ first_tx->flags |= XEN_NETTXF_data_validated;
/* Optional extra info after the first request. */
if (skb_shinfo(skb)->gso_size) {
@@ -729,7 +727,7 @@ static netdev_tx_t xennet_start_xmit(str
gso = (struct xen_netif_extra_info *)
RING_GET_REQUEST(&queue->tx, queue->tx.req_prod_pvt++);
- tx->flags |= XEN_NETTXF_extra_info;
+ first_tx->flags |= XEN_NETTXF_extra_info;
gso->u.gso.size = skb_shinfo(skb)->gso_size;
gso->u.gso.type = (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) ?
@@ -743,12 +741,12 @@ static netdev_tx_t xennet_start_xmit(str
}
/* Requests for the rest of the linear area. */
- tx = xennet_make_txreqs(queue, tx, skb, page, offset, len);
+ xennet_make_txreqs(&info, page, offset, len);
/* Requests for all the frags. */
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- tx = xennet_make_txreqs(queue, tx, skb, skb_frag_page(frag),
+ xennet_make_txreqs(&info, skb_frag_page(frag),
skb_frag_off(frag),
skb_frag_size(frag));
}
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 115/121] xen/netfront: disentangle tx_skb_freelist
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (113 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 114/121] xen/netfront: dont read data from request on the ring page Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 116/121] xen/netfront: dont trust the backend response data blindly Greg Kroah-Hartman
` (14 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Juergen Gross, David S. Miller
From: Juergen Gross <jgross@suse.com>
commit 21631d2d741a64a073e167c27769e73bc7844a2f upstream.
The tx_skb_freelist elements are in a single linked list with the
request id used as link reference. The per element link field is in a
union with the skb pointer of an in use request.
Move the link reference out of the union in order to enable a later
reuse of it for requests which need a populated skb pointer.
Rename add_id_to_freelist() and get_id_from_freelist() to
add_id_to_list() and get_id_from_list() in order to prepare using
those for other lists as well. Define ~0 as value to indicate the end
of a list and place that value into the link for a request not being
on the list.
When freeing a skb zero the skb pointer in the request. Use a NULL
value of the skb pointer instead of skb_entry_is_link() for deciding
whether a request has a skb linked to it.
Remove skb_entry_set_link() and open code it instead as it is really
trivial now.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netfront.c | 61 ++++++++++++++++++---------------------------
1 file changed, 25 insertions(+), 36 deletions(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -126,17 +126,11 @@ struct netfront_queue {
/*
* {tx,rx}_skbs store outstanding skbuffs. Free tx_skb entries
- * are linked from tx_skb_freelist through skb_entry.link.
- *
- * NB. Freelist index entries are always going to be less than
- * PAGE_OFFSET, whereas pointers to skbs will always be equal or
- * greater than PAGE_OFFSET: we use this property to distinguish
- * them.
+ * are linked from tx_skb_freelist through tx_link.
*/
- union skb_entry {
- struct sk_buff *skb;
- unsigned long link;
- } tx_skbs[NET_TX_RING_SIZE];
+ struct sk_buff *tx_skbs[NET_TX_RING_SIZE];
+ unsigned short tx_link[NET_TX_RING_SIZE];
+#define TX_LINK_NONE 0xffff
grant_ref_t gref_tx_head;
grant_ref_t grant_tx_ref[NET_TX_RING_SIZE];
struct page *grant_tx_page[NET_TX_RING_SIZE];
@@ -181,33 +175,25 @@ struct netfront_rx_info {
struct xen_netif_extra_info extras[XEN_NETIF_EXTRA_TYPE_MAX - 1];
};
-static void skb_entry_set_link(union skb_entry *list, unsigned short id)
-{
- list->link = id;
-}
-
-static int skb_entry_is_link(const union skb_entry *list)
-{
- BUILD_BUG_ON(sizeof(list->skb) != sizeof(list->link));
- return (unsigned long)list->skb < PAGE_OFFSET;
-}
-
/*
* Access macros for acquiring freeing slots in tx_skbs[].
*/
-static void add_id_to_freelist(unsigned *head, union skb_entry *list,
- unsigned short id)
+static void add_id_to_list(unsigned *head, unsigned short *list,
+ unsigned short id)
{
- skb_entry_set_link(&list[id], *head);
+ list[id] = *head;
*head = id;
}
-static unsigned short get_id_from_freelist(unsigned *head,
- union skb_entry *list)
+static unsigned short get_id_from_list(unsigned *head, unsigned short *list)
{
unsigned int id = *head;
- *head = list[id].link;
+
+ if (id != TX_LINK_NONE) {
+ *head = list[id];
+ list[id] = TX_LINK_NONE;
+ }
return id;
}
@@ -406,7 +392,8 @@ static void xennet_tx_buf_gc(struct netf
continue;
id = txrsp.id;
- skb = queue->tx_skbs[id].skb;
+ skb = queue->tx_skbs[id];
+ queue->tx_skbs[id] = NULL;
if (unlikely(gnttab_query_foreign_access(
queue->grant_tx_ref[id]) != 0)) {
pr_alert("%s: warning -- grant still in use by backend domain\n",
@@ -419,7 +406,7 @@ static void xennet_tx_buf_gc(struct netf
&queue->gref_tx_head, queue->grant_tx_ref[id]);
queue->grant_tx_ref[id] = GRANT_INVALID_REF;
queue->grant_tx_page[id] = NULL;
- add_id_to_freelist(&queue->tx_skb_freelist, queue->tx_skbs, id);
+ add_id_to_list(&queue->tx_skb_freelist, queue->tx_link, id);
dev_kfree_skb_irq(skb);
}
@@ -452,7 +439,7 @@ static void xennet_tx_setup_grant(unsign
struct netfront_queue *queue = info->queue;
struct sk_buff *skb = info->skb;
- id = get_id_from_freelist(&queue->tx_skb_freelist, queue->tx_skbs);
+ id = get_id_from_list(&queue->tx_skb_freelist, queue->tx_link);
tx = RING_GET_REQUEST(&queue->tx, queue->tx.req_prod_pvt++);
ref = gnttab_claim_grant_reference(&queue->gref_tx_head);
WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)(int)ref));
@@ -460,7 +447,7 @@ static void xennet_tx_setup_grant(unsign
gnttab_grant_foreign_access_ref(ref, queue->info->xbdev->otherend_id,
gfn, GNTMAP_readonly);
- queue->tx_skbs[id].skb = skb;
+ queue->tx_skbs[id] = skb;
queue->grant_tx_page[id] = page;
queue->grant_tx_ref[id] = ref;
@@ -1286,17 +1273,18 @@ static void xennet_release_tx_bufs(struc
for (i = 0; i < NET_TX_RING_SIZE; i++) {
/* Skip over entries which are actually freelist references */
- if (skb_entry_is_link(&queue->tx_skbs[i]))
+ if (!queue->tx_skbs[i])
continue;
- skb = queue->tx_skbs[i].skb;
+ skb = queue->tx_skbs[i];
+ queue->tx_skbs[i] = NULL;
get_page(queue->grant_tx_page[i]);
gnttab_end_foreign_access(queue->grant_tx_ref[i],
GNTMAP_readonly,
(unsigned long)page_address(queue->grant_tx_page[i]));
queue->grant_tx_page[i] = NULL;
queue->grant_tx_ref[i] = GRANT_INVALID_REF;
- add_id_to_freelist(&queue->tx_skb_freelist, queue->tx_skbs, i);
+ add_id_to_list(&queue->tx_skb_freelist, queue->tx_link, i);
dev_kfree_skb_irq(skb);
}
}
@@ -1857,13 +1845,14 @@ static int xennet_init_queue(struct netf
snprintf(queue->name, sizeof(queue->name), "vif%s-q%u",
devid, queue->id);
- /* Initialise tx_skbs as a free chain containing every entry. */
+ /* Initialise tx_skb_freelist as a free chain containing every entry. */
queue->tx_skb_freelist = 0;
for (i = 0; i < NET_TX_RING_SIZE; i++) {
- skb_entry_set_link(&queue->tx_skbs[i], i+1);
+ queue->tx_link[i] = i + 1;
queue->grant_tx_ref[i] = GRANT_INVALID_REF;
queue->grant_tx_page[i] = NULL;
}
+ queue->tx_link[NET_TX_RING_SIZE - 1] = TX_LINK_NONE;
/* Clear out rx_skbs */
for (i = 0; i < NET_RX_RING_SIZE; i++) {
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 116/121] xen/netfront: dont trust the backend response data blindly
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (114 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 115/121] xen/netfront: disentangle tx_skb_freelist Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 117/121] tty: hvc: replace BUG_ON() with negative return value Greg Kroah-Hartman
` (13 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich, David S. Miller
From: Juergen Gross <jgross@suse.com>
commit a884daa61a7d91650987e855464526aef219590f upstream.
Today netfront will trust the backend to send only sane response data.
In order to avoid privilege escalations or crashes in case of malicious
backends verify the data to be within expected limits. Especially make
sure that the response always references an outstanding request.
Note that only the tx queue needs special id handling, as for the rx
queue the id is equal to the index in the ring page.
Introduce a new indicator for the device whether it is broken and let
the device stop working when it is set. Set this indicator in case the
backend sets any weird data.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netfront.c | 89 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 84 insertions(+), 5 deletions(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -131,10 +131,12 @@ struct netfront_queue {
struct sk_buff *tx_skbs[NET_TX_RING_SIZE];
unsigned short tx_link[NET_TX_RING_SIZE];
#define TX_LINK_NONE 0xffff
+#define TX_PENDING 0xfffe
grant_ref_t gref_tx_head;
grant_ref_t grant_tx_ref[NET_TX_RING_SIZE];
struct page *grant_tx_page[NET_TX_RING_SIZE];
unsigned tx_skb_freelist;
+ unsigned int tx_pend_queue;
spinlock_t rx_lock ____cacheline_aligned_in_smp;
struct xen_netif_rx_front_ring rx;
@@ -167,6 +169,9 @@ struct netfront_info {
bool netback_has_xdp_headroom;
bool netfront_xdp_enabled;
+ /* Is device behaving sane? */
+ bool broken;
+
atomic_t rx_gso_checksum_fixup;
};
@@ -349,7 +354,7 @@ static int xennet_open(struct net_device
unsigned int i = 0;
struct netfront_queue *queue = NULL;
- if (!np->queues)
+ if (!np->queues || np->broken)
return -ENODEV;
for (i = 0; i < num_queues; ++i) {
@@ -377,11 +382,17 @@ static void xennet_tx_buf_gc(struct netf
unsigned short id;
struct sk_buff *skb;
bool more_to_do;
+ const struct device *dev = &queue->info->netdev->dev;
BUG_ON(!netif_carrier_ok(queue->info->netdev));
do {
prod = queue->tx.sring->rsp_prod;
+ if (RING_RESPONSE_PROD_OVERFLOW(&queue->tx, prod)) {
+ dev_alert(dev, "Illegal number of responses %u\n",
+ prod - queue->tx.rsp_cons);
+ goto err;
+ }
rmb(); /* Ensure we see responses up to 'rp'. */
for (cons = queue->tx.rsp_cons; cons != prod; cons++) {
@@ -391,14 +402,27 @@ static void xennet_tx_buf_gc(struct netf
if (txrsp.status == XEN_NETIF_RSP_NULL)
continue;
- id = txrsp.id;
+ id = txrsp.id;
+ if (id >= RING_SIZE(&queue->tx)) {
+ dev_alert(dev,
+ "Response has incorrect id (%u)\n",
+ id);
+ goto err;
+ }
+ if (queue->tx_link[id] != TX_PENDING) {
+ dev_alert(dev,
+ "Response for inactive request\n");
+ goto err;
+ }
+
+ queue->tx_link[id] = TX_LINK_NONE;
skb = queue->tx_skbs[id];
queue->tx_skbs[id] = NULL;
if (unlikely(gnttab_query_foreign_access(
queue->grant_tx_ref[id]) != 0)) {
- pr_alert("%s: warning -- grant still in use by backend domain\n",
- __func__);
- BUG();
+ dev_alert(dev,
+ "Grant still in use by backend domain\n");
+ goto err;
}
gnttab_end_foreign_access_ref(
queue->grant_tx_ref[id], GNTMAP_readonly);
@@ -416,6 +440,12 @@ static void xennet_tx_buf_gc(struct netf
} while (more_to_do);
xennet_maybe_wake_tx(queue);
+
+ return;
+
+ err:
+ queue->info->broken = true;
+ dev_alert(dev, "Disabled for further use\n");
}
struct xennet_gnttab_make_txreq {
@@ -459,6 +489,12 @@ static void xennet_tx_setup_grant(unsign
*tx = info->tx_local;
+ /*
+ * Put the request in the pending queue, it will be set to be pending
+ * when the producer index is about to be raised.
+ */
+ add_id_to_list(&queue->tx_pend_queue, queue->tx_link, id);
+
info->tx = tx;
info->size += info->tx_local.size;
}
@@ -551,6 +587,15 @@ static u16 xennet_select_queue(struct ne
return queue_idx;
}
+static void xennet_mark_tx_pending(struct netfront_queue *queue)
+{
+ unsigned int i;
+
+ while ((i = get_id_from_list(&queue->tx_pend_queue, queue->tx_link)) !=
+ TX_LINK_NONE)
+ queue->tx_link[i] = TX_PENDING;
+}
+
static int xennet_xdp_xmit_one(struct net_device *dev,
struct netfront_queue *queue,
struct xdp_frame *xdpf)
@@ -568,6 +613,8 @@ static int xennet_xdp_xmit_one(struct ne
offset_in_page(xdpf->data),
xdpf->len);
+ xennet_mark_tx_pending(queue);
+
RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&queue->tx, notify);
if (notify)
notify_remote_via_irq(queue->tx_irq);
@@ -592,6 +639,8 @@ static int xennet_xdp_xmit(struct net_de
int drops = 0;
int i, err;
+ if (unlikely(np->broken))
+ return -ENODEV;
if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
return -EINVAL;
@@ -638,6 +687,8 @@ static netdev_tx_t xennet_start_xmit(str
/* Drop the packet if no queues are set up */
if (num_queues < 1)
goto drop;
+ if (unlikely(np->broken))
+ goto drop;
/* Determine which queue to transmit this SKB on */
queue_index = skb_get_queue_mapping(skb);
queue = &np->queues[queue_index];
@@ -744,6 +795,8 @@ static netdev_tx_t xennet_start_xmit(str
/* timestamp packet in software */
skb_tx_timestamp(skb);
+ xennet_mark_tx_pending(queue);
+
RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&queue->tx, notify);
if (notify)
notify_remote_via_irq(queue->tx_irq);
@@ -1143,6 +1196,13 @@ static int xennet_poll(struct napi_struc
skb_queue_head_init(&tmpq);
rp = queue->rx.sring->rsp_prod;
+ if (RING_RESPONSE_PROD_OVERFLOW(&queue->rx, rp)) {
+ dev_alert(&dev->dev, "Illegal number of responses %u\n",
+ rp - queue->rx.rsp_cons);
+ queue->info->broken = true;
+ spin_unlock(&queue->rx_lock);
+ return 0;
+ }
rmb(); /* Ensure we see queued responses up to 'rp'. */
i = queue->rx.rsp_cons;
@@ -1364,6 +1424,9 @@ static irqreturn_t xennet_tx_interrupt(i
struct netfront_queue *queue = dev_id;
unsigned long flags;
+ if (queue->info->broken)
+ return IRQ_HANDLED;
+
spin_lock_irqsave(&queue->tx_lock, flags);
xennet_tx_buf_gc(queue);
spin_unlock_irqrestore(&queue->tx_lock, flags);
@@ -1376,6 +1439,9 @@ static irqreturn_t xennet_rx_interrupt(i
struct netfront_queue *queue = dev_id;
struct net_device *dev = queue->info->netdev;
+ if (queue->info->broken)
+ return IRQ_HANDLED;
+
if (likely(netif_carrier_ok(dev) &&
RING_HAS_UNCONSUMED_RESPONSES(&queue->rx)))
napi_schedule(&queue->napi);
@@ -1397,6 +1463,10 @@ static void xennet_poll_controller(struc
struct netfront_info *info = netdev_priv(dev);
unsigned int num_queues = dev->real_num_tx_queues;
unsigned int i;
+
+ if (info->broken)
+ return;
+
for (i = 0; i < num_queues; ++i)
xennet_interrupt(0, &info->queues[i]);
}
@@ -1468,6 +1538,11 @@ static int xennet_xdp_set(struct net_dev
static int xennet_xdp(struct net_device *dev, struct netdev_bpf *xdp)
{
+ struct netfront_info *np = netdev_priv(dev);
+
+ if (np->broken)
+ return -ENODEV;
+
switch (xdp->command) {
case XDP_SETUP_PROG:
return xennet_xdp_set(dev, xdp->prog, xdp->extack);
@@ -1847,6 +1922,7 @@ static int xennet_init_queue(struct netf
/* Initialise tx_skb_freelist as a free chain containing every entry. */
queue->tx_skb_freelist = 0;
+ queue->tx_pend_queue = TX_LINK_NONE;
for (i = 0; i < NET_TX_RING_SIZE; i++) {
queue->tx_link[i] = i + 1;
queue->grant_tx_ref[i] = GRANT_INVALID_REF;
@@ -2121,6 +2197,9 @@ static int talk_to_netback(struct xenbus
if (info->queues)
xennet_destroy_queues(info);
+ /* For the case of a reconnect reset the "broken" indicator. */
+ info->broken = false;
+
err = xennet_create_queues(info, &num_queues);
if (err < 0) {
xenbus_dev_fatal(dev, err, "creating queues");
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 117/121] tty: hvc: replace BUG_ON() with negative return value
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (115 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 116/121] xen/netfront: dont trust the backend response data blindly Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 118/121] s390/mm: validate VMA in PGSTE manipulation functions Greg Kroah-Hartman
` (12 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jan Beulich, Juergen Gross
From: Juergen Gross <jgross@suse.com>
commit e679004dec37566f658a255157d3aed9d762a2b7 upstream.
Xen frontends shouldn't BUG() in case of illegal data received from
their backends. So replace the BUG_ON()s when reading illegal data from
the ring page with negative return values.
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210707091045.460-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/hvc/hvc_xen.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -86,7 +86,11 @@ static int __write_console(struct xencon
cons = intf->out_cons;
prod = intf->out_prod;
mb(); /* update queue values before going on */
- BUG_ON((prod - cons) > sizeof(intf->out));
+
+ if ((prod - cons) > sizeof(intf->out)) {
+ pr_err_once("xencons: Illegal ring page indices");
+ return -EINVAL;
+ }
while ((sent < len) && ((prod - cons) < sizeof(intf->out)))
intf->out[MASK_XENCONS_IDX(prod++, intf->out)] = data[sent++];
@@ -114,7 +118,10 @@ static int domU_write_console(uint32_t v
*/
while (len) {
int sent = __write_console(cons, data, len);
-
+
+ if (sent < 0)
+ return sent;
+
data += sent;
len -= sent;
@@ -138,7 +145,11 @@ static int domU_read_console(uint32_t vt
cons = intf->in_cons;
prod = intf->in_prod;
mb(); /* get pointers before reading ring */
- BUG_ON((prod - cons) > sizeof(intf->in));
+
+ if ((prod - cons) > sizeof(intf->in)) {
+ pr_err_once("xencons: Illegal ring page indices");
+ return -EINVAL;
+ }
while (cons != prod && recv < len)
buf[recv++] = intf->in[MASK_XENCONS_IDX(cons++, intf->in)];
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 118/121] s390/mm: validate VMA in PGSTE manipulation functions
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (116 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 117/121] tty: hvc: replace BUG_ON() with negative return value Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 119/121] shm: extend forced shm destroy to support objects from several IPC nses Greg Kroah-Hartman
` (11 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Hildenbrand, Claudio Imbrenda,
Heiko Carstens, Christian Borntraeger
From: David Hildenbrand <david@redhat.com>
commit fe3d10024073f06f04c74b9674bd71ccc1d787cf upstream.
We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f2605e ("mm: mmap: zap pages
with read mmap_sem in munmap"). gfn_to_hva() will only translate using
KVM memory regions, but won't validate the VMA.
Further, we should not allocate page tables outside of VMA boundaries: if
evil user space decides to map hugetlbfs to these ranges, bad things will
happen because we suddenly have PTE or PMD page tables where we
shouldn't have them.
Similarly, we have to check if we suddenly find a hugetlbfs VMA, before
calling get_locked_pte().
Fixes: 2d42f9477320 ("s390/kvm: Add PGSTE manipulation functions")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-4-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/mm/pgtable.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -988,6 +988,7 @@ EXPORT_SYMBOL(get_guest_storage_key);
int pgste_perform_essa(struct mm_struct *mm, unsigned long hva, int orc,
unsigned long *oldpte, unsigned long *oldpgste)
{
+ struct vm_area_struct *vma;
unsigned long pgstev;
spinlock_t *ptl;
pgste_t pgste;
@@ -997,6 +998,10 @@ int pgste_perform_essa(struct mm_struct
WARN_ON_ONCE(orc > ESSA_MAX);
if (unlikely(orc > ESSA_MAX))
return -EINVAL;
+
+ vma = find_vma(mm, hva);
+ if (!vma || hva < vma->vm_start || is_vm_hugetlb_page(vma))
+ return -EFAULT;
ptep = get_locked_pte(mm, hva, &ptl);
if (unlikely(!ptep))
return -EFAULT;
@@ -1089,10 +1094,14 @@ EXPORT_SYMBOL(pgste_perform_essa);
int set_pgste_bits(struct mm_struct *mm, unsigned long hva,
unsigned long bits, unsigned long value)
{
+ struct vm_area_struct *vma;
spinlock_t *ptl;
pgste_t new;
pte_t *ptep;
+ vma = find_vma(mm, hva);
+ if (!vma || hva < vma->vm_start || is_vm_hugetlb_page(vma))
+ return -EFAULT;
ptep = get_locked_pte(mm, hva, &ptl);
if (unlikely(!ptep))
return -EFAULT;
@@ -1117,9 +1126,13 @@ EXPORT_SYMBOL(set_pgste_bits);
*/
int get_pgste(struct mm_struct *mm, unsigned long hva, unsigned long *pgstep)
{
+ struct vm_area_struct *vma;
spinlock_t *ptl;
pte_t *ptep;
+ vma = find_vma(mm, hva);
+ if (!vma || hva < vma->vm_start || is_vm_hugetlb_page(vma))
+ return -EFAULT;
ptep = get_locked_pte(mm, hva, &ptl);
if (unlikely(!ptep))
return -EFAULT;
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 119/121] shm: extend forced shm destroy to support objects from several IPC nses
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (117 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 118/121] s390/mm: validate VMA in PGSTE manipulation functions Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 120/121] net: stmmac: platform: fix build warning when with !CONFIG_PM_SLEEP Greg Kroah-Hartman
` (10 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manfred Spraul,
Alexander Mikhalitsyn, Eric W. Biederman, Davidlohr Bueso,
Andrei Vagin, Pavel Tikhomirov, Vasily Averin, Andrew Morton,
Linus Torvalds
From: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
commit 85b6d24646e4125c591639841169baa98a2da503 upstream.
Currently, the exit_shm() function not designed to work properly when
task->sysvshm.shm_clist holds shm objects from different IPC namespaces.
This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it
leads to use-after-free (reproducer exists).
This is an attempt to fix the problem by extending exit_shm mechanism to
handle shm's destroy from several IPC ns'es.
To achieve that we do several things:
1. add a namespace (non-refcounted) pointer to the struct shmid_kernel
2. during new shm object creation (newseg()/shmget syscall) we
initialize this pointer by current task IPC ns
3. exit_shm() fully reworked such that it traverses over all shp's in
task->sysvshm.shm_clist and gets IPC namespace not from current task
as it was before but from shp's object itself, then call
shm_destroy(shp, ns).
Note: We need to be really careful here, because as it was said before
(1), our pointer to IPC ns non-refcnt'ed. To be on the safe side we
using special helper get_ipc_ns_not_zero() which allows to get IPC ns
refcounter only if IPC ns not in the "state of destruction".
Q/A
Q: Why can we access shp->ns memory using non-refcounted pointer?
A: Because shp object lifetime is always shorther than IPC namespace
lifetime, so, if we get shp object from the task->sysvshm.shm_clist
while holding task_lock(task) nobody can steal our namespace.
Q: Does this patch change semantics of unshare/setns/clone syscalls?
A: No. It's just fixes non-covered case when process may leave IPC
namespace without getting task->sysvshm.shm_clist list cleaned up.
Link: https://lkml.kernel.org/r/67bb03e5-f79c-1815-e2bf-949c67047418@colorfullife.com
Link: https://lkml.kernel.org/r/20211109151501.4921-1-manfred@colorfullife.com
Fixes: ab602f79915 ("shm: make exit_shm work proportional to task activity")
Co-developed-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/ipc_namespace.h | 15 +++
include/linux/sched/task.h | 2
ipc/shm.c | 189 +++++++++++++++++++++++++++++++-----------
3 files changed, 159 insertions(+), 47 deletions(-)
--- a/include/linux/ipc_namespace.h
+++ b/include/linux/ipc_namespace.h
@@ -132,6 +132,16 @@ static inline struct ipc_namespace *get_
return ns;
}
+static inline struct ipc_namespace *get_ipc_ns_not_zero(struct ipc_namespace *ns)
+{
+ if (ns) {
+ if (refcount_inc_not_zero(&ns->count))
+ return ns;
+ }
+
+ return NULL;
+}
+
extern void put_ipc_ns(struct ipc_namespace *ns);
#else
static inline struct ipc_namespace *copy_ipcs(unsigned long flags,
@@ -147,6 +157,11 @@ static inline struct ipc_namespace *get_
{
return ns;
}
+
+static inline struct ipc_namespace *get_ipc_ns_not_zero(struct ipc_namespace *ns)
+{
+ return ns;
+}
static inline void put_ipc_ns(struct ipc_namespace *ns)
{
--- a/include/linux/sched/task.h
+++ b/include/linux/sched/task.h
@@ -158,7 +158,7 @@ static inline struct vm_struct *task_sta
* Protects ->fs, ->files, ->mm, ->group_info, ->comm, keyring
* subscriptions and synchronises with wait4(). Also used in procfs. Also
* pins the final release of task.io_context. Also protects ->cpuset and
- * ->cgroup.subsys[]. And ->vfork_done.
+ * ->cgroup.subsys[]. And ->vfork_done. And ->sysvshm.shm_clist.
*
* Nests both inside and outside of read_lock(&tasklist_lock).
* It must not be nested with write_lock_irq(&tasklist_lock),
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -62,9 +62,18 @@ struct shmid_kernel /* private to the ke
struct pid *shm_lprid;
struct user_struct *mlock_user;
- /* The task created the shm object. NULL if the task is dead. */
+ /*
+ * The task created the shm object, for
+ * task_lock(shp->shm_creator)
+ */
struct task_struct *shm_creator;
- struct list_head shm_clist; /* list by creator */
+
+ /*
+ * List by creator. task_lock(->shm_creator) required for read/write.
+ * If list_empty(), then the creator is dead already.
+ */
+ struct list_head shm_clist;
+ struct ipc_namespace *ns;
} __randomize_layout;
/* shm_mode upper byte flags */
@@ -115,6 +124,7 @@ static void do_shm_rmid(struct ipc_names
struct shmid_kernel *shp;
shp = container_of(ipcp, struct shmid_kernel, shm_perm);
+ WARN_ON(ns != shp->ns);
if (shp->shm_nattch) {
shp->shm_perm.mode |= SHM_DEST;
@@ -225,10 +235,43 @@ static void shm_rcu_free(struct rcu_head
kvfree(shp);
}
-static inline void shm_rmid(struct ipc_namespace *ns, struct shmid_kernel *s)
+/*
+ * It has to be called with shp locked.
+ * It must be called before ipc_rmid()
+ */
+static inline void shm_clist_rm(struct shmid_kernel *shp)
+{
+ struct task_struct *creator;
+
+ /* ensure that shm_creator does not disappear */
+ rcu_read_lock();
+
+ /*
+ * A concurrent exit_shm may do a list_del_init() as well.
+ * Just do nothing if exit_shm already did the work
+ */
+ if (!list_empty(&shp->shm_clist)) {
+ /*
+ * shp->shm_creator is guaranteed to be valid *only*
+ * if shp->shm_clist is not empty.
+ */
+ creator = shp->shm_creator;
+
+ task_lock(creator);
+ /*
+ * list_del_init() is a nop if the entry was already removed
+ * from the list.
+ */
+ list_del_init(&shp->shm_clist);
+ task_unlock(creator);
+ }
+ rcu_read_unlock();
+}
+
+static inline void shm_rmid(struct shmid_kernel *s)
{
- list_del(&s->shm_clist);
- ipc_rmid(&shm_ids(ns), &s->shm_perm);
+ shm_clist_rm(s);
+ ipc_rmid(&shm_ids(s->ns), &s->shm_perm);
}
@@ -283,7 +326,7 @@ static void shm_destroy(struct ipc_names
shm_file = shp->shm_file;
shp->shm_file = NULL;
ns->shm_tot -= (shp->shm_segsz + PAGE_SIZE - 1) >> PAGE_SHIFT;
- shm_rmid(ns, shp);
+ shm_rmid(shp);
shm_unlock(shp);
if (!is_file_hugepages(shm_file))
shmem_lock(shm_file, 0, shp->mlock_user);
@@ -306,10 +349,10 @@ static void shm_destroy(struct ipc_names
*
* 2) sysctl kernel.shm_rmid_forced is set to 1.
*/
-static bool shm_may_destroy(struct ipc_namespace *ns, struct shmid_kernel *shp)
+static bool shm_may_destroy(struct shmid_kernel *shp)
{
return (shp->shm_nattch == 0) &&
- (ns->shm_rmid_forced ||
+ (shp->ns->shm_rmid_forced ||
(shp->shm_perm.mode & SHM_DEST));
}
@@ -340,7 +383,7 @@ static void shm_close(struct vm_area_str
ipc_update_pid(&shp->shm_lprid, task_tgid(current));
shp->shm_dtim = ktime_get_real_seconds();
shp->shm_nattch--;
- if (shm_may_destroy(ns, shp))
+ if (shm_may_destroy(shp))
shm_destroy(ns, shp);
else
shm_unlock(shp);
@@ -361,10 +404,10 @@ static int shm_try_destroy_orphaned(int
*
* As shp->* are changed under rwsem, it's safe to skip shp locking.
*/
- if (shp->shm_creator != NULL)
+ if (!list_empty(&shp->shm_clist))
return 0;
- if (shm_may_destroy(ns, shp)) {
+ if (shm_may_destroy(shp)) {
shm_lock_by_ptr(shp);
shm_destroy(ns, shp);
}
@@ -382,48 +425,97 @@ void shm_destroy_orphaned(struct ipc_nam
/* Locking assumes this will only be called with task == current */
void exit_shm(struct task_struct *task)
{
- struct ipc_namespace *ns = task->nsproxy->ipc_ns;
- struct shmid_kernel *shp, *n;
+ for (;;) {
+ struct shmid_kernel *shp;
+ struct ipc_namespace *ns;
- if (list_empty(&task->sysvshm.shm_clist))
- return;
+ task_lock(task);
+
+ if (list_empty(&task->sysvshm.shm_clist)) {
+ task_unlock(task);
+ break;
+ }
+
+ shp = list_first_entry(&task->sysvshm.shm_clist, struct shmid_kernel,
+ shm_clist);
- /*
- * If kernel.shm_rmid_forced is not set then only keep track of
- * which shmids are orphaned, so that a later set of the sysctl
- * can clean them up.
- */
- if (!ns->shm_rmid_forced) {
- down_read(&shm_ids(ns).rwsem);
- list_for_each_entry(shp, &task->sysvshm.shm_clist, shm_clist)
- shp->shm_creator = NULL;
/*
- * Only under read lock but we are only called on current
- * so no entry on the list will be shared.
+ * 1) Get pointer to the ipc namespace. It is worth to say
+ * that this pointer is guaranteed to be valid because
+ * shp lifetime is always shorter than namespace lifetime
+ * in which shp lives.
+ * We taken task_lock it means that shp won't be freed.
*/
- list_del(&task->sysvshm.shm_clist);
- up_read(&shm_ids(ns).rwsem);
- return;
- }
+ ns = shp->ns;
- /*
- * Destroy all already created segments, that were not yet mapped,
- * and mark any mapped as orphan to cover the sysctl toggling.
- * Destroy is skipped if shm_may_destroy() returns false.
- */
- down_write(&shm_ids(ns).rwsem);
- list_for_each_entry_safe(shp, n, &task->sysvshm.shm_clist, shm_clist) {
- shp->shm_creator = NULL;
+ /*
+ * 2) If kernel.shm_rmid_forced is not set then only keep track of
+ * which shmids are orphaned, so that a later set of the sysctl
+ * can clean them up.
+ */
+ if (!ns->shm_rmid_forced)
+ goto unlink_continue;
- if (shm_may_destroy(ns, shp)) {
- shm_lock_by_ptr(shp);
- shm_destroy(ns, shp);
+ /*
+ * 3) get a reference to the namespace.
+ * The refcount could be already 0. If it is 0, then
+ * the shm objects will be free by free_ipc_work().
+ */
+ ns = get_ipc_ns_not_zero(ns);
+ if (!ns) {
+unlink_continue:
+ list_del_init(&shp->shm_clist);
+ task_unlock(task);
+ continue;
}
- }
- /* Remove the list head from any segments still attached. */
- list_del(&task->sysvshm.shm_clist);
- up_write(&shm_ids(ns).rwsem);
+ /*
+ * 4) get a reference to shp.
+ * This cannot fail: shm_clist_rm() is called before
+ * ipc_rmid(), thus the refcount cannot be 0.
+ */
+ WARN_ON(!ipc_rcu_getref(&shp->shm_perm));
+
+ /*
+ * 5) unlink the shm segment from the list of segments
+ * created by current.
+ * This must be done last. After unlinking,
+ * only the refcounts obtained above prevent IPC_RMID
+ * from destroying the segment or the namespace.
+ */
+ list_del_init(&shp->shm_clist);
+
+ task_unlock(task);
+
+ /*
+ * 6) we have all references
+ * Thus lock & if needed destroy shp.
+ */
+ down_write(&shm_ids(ns).rwsem);
+ shm_lock_by_ptr(shp);
+ /*
+ * rcu_read_lock was implicitly taken in shm_lock_by_ptr, it's
+ * safe to call ipc_rcu_putref here
+ */
+ ipc_rcu_putref(&shp->shm_perm, shm_rcu_free);
+
+ if (ipc_valid_object(&shp->shm_perm)) {
+ if (shm_may_destroy(shp))
+ shm_destroy(ns, shp);
+ else
+ shm_unlock(shp);
+ } else {
+ /*
+ * Someone else deleted the shp from namespace
+ * idr/kht while we have waited.
+ * Just unlock and continue.
+ */
+ shm_unlock(shp);
+ }
+
+ up_write(&shm_ids(ns).rwsem);
+ put_ipc_ns(ns); /* paired with get_ipc_ns_not_zero */
+ }
}
static vm_fault_t shm_fault(struct vm_fault *vmf)
@@ -680,7 +772,11 @@ static int newseg(struct ipc_namespace *
if (error < 0)
goto no_id;
+ shp->ns = ns;
+
+ task_lock(current);
list_add(&shp->shm_clist, ¤t->sysvshm.shm_clist);
+ task_unlock(current);
/*
* shmid gets reported as "inode#" in /proc/pid/maps.
@@ -1573,7 +1669,8 @@ out_nattch:
down_write(&shm_ids(ns).rwsem);
shp = shm_lock(ns, shmid);
shp->shm_nattch--;
- if (shm_may_destroy(ns, shp))
+
+ if (shm_may_destroy(shp))
shm_destroy(ns, shp);
else
shm_unlock(shp);
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 120/121] net: stmmac: platform: fix build warning when with !CONFIG_PM_SLEEP
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (118 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 119/121] shm: extend forced shm destroy to support objects from several IPC nses Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-29 18:19 ` [PATCH 5.10 121/121] drm/amdgpu/gfx9: switch to golden tsc registers for renoir+ Greg Kroah-Hartman
` (9 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Joakim Zhang,
David S. Miller
From: Joakim Zhang <qiangqing.zhang@nxp.com>
commit 2a48d96fd58a666ae231c3dd6fe4a458798ac645 upstream.
Use __maybe_unused for noirq_suspend()/noirq_resume() hooks to avoid
build warning with !CONFIG_PM_SLEEP:
>> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:796:12: error: 'stmmac_pltfr_noirq_resume' defined but not used [-Werror=unused-function]
796 | static int stmmac_pltfr_noirq_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:775:12: error: 'stmmac_pltfr_noirq_suspend' defined but not used [-Werror=unused-function]
775 | static int stmmac_pltfr_noirq_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: 276aae377206 ("net: stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -779,7 +779,7 @@ static int __maybe_unused stmmac_runtime
return stmmac_bus_clks_config(priv, true);
}
-static int stmmac_pltfr_noirq_suspend(struct device *dev)
+static int __maybe_unused stmmac_pltfr_noirq_suspend(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
struct stmmac_priv *priv = netdev_priv(ndev);
@@ -800,7 +800,7 @@ static int stmmac_pltfr_noirq_suspend(st
return 0;
}
-static int stmmac_pltfr_noirq_resume(struct device *dev)
+static int __maybe_unused stmmac_pltfr_noirq_resume(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
struct stmmac_priv *priv = netdev_priv(ndev);
^ permalink raw reply [flat|nested] 131+ messages in thread* [PATCH 5.10 121/121] drm/amdgpu/gfx9: switch to golden tsc registers for renoir+
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (119 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 120/121] net: stmmac: platform: fix build warning when with !CONFIG_PM_SLEEP Greg Kroah-Hartman
@ 2021-11-29 18:19 ` Greg Kroah-Hartman
2021-11-30 1:03 ` [PATCH 5.10 000/121] 5.10.83-rc1 review Shuah Khan
` (8 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Greg Kroah-Hartman @ 2021-11-29 18:19 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Luben Tuikov, Alex Deucher
From: Alex Deucher <alexander.deucher@amd.com>
commit 53af98c091bc42fd9ec64cfabc40da4e5f3aae93 upstream.
Renoir and newer gfx9 APUs have new TSC register that is
not part of the gfxoff tile, so it can be read without
needing to disable gfx off.
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 46 +++++++++++++++++++++++++---------
1 file changed, 35 insertions(+), 11 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -137,6 +137,11 @@ MODULE_FIRMWARE("amdgpu/green_sardine_rl
#define mmTCP_CHAN_STEER_5_ARCT 0x0b0c
#define mmTCP_CHAN_STEER_5_ARCT_BASE_IDX 0
+#define mmGOLDEN_TSC_COUNT_UPPER_Renoir 0x0025
+#define mmGOLDEN_TSC_COUNT_UPPER_Renoir_BASE_IDX 1
+#define mmGOLDEN_TSC_COUNT_LOWER_Renoir 0x0026
+#define mmGOLDEN_TSC_COUNT_LOWER_Renoir_BASE_IDX 1
+
enum ta_ras_gfx_subblock {
/*CPC*/
TA_RAS_BLOCK__GFX_CPC_INDEX_START = 0,
@@ -4147,19 +4152,38 @@ failed_kiq_read:
static uint64_t gfx_v9_0_get_gpu_clock_counter(struct amdgpu_device *adev)
{
- uint64_t clock;
+ uint64_t clock, clock_lo, clock_hi, hi_check;
- amdgpu_gfx_off_ctrl(adev, false);
- mutex_lock(&adev->gfx.gpu_clock_mutex);
- if (adev->asic_type == CHIP_VEGA10 && amdgpu_sriov_runtime(adev)) {
- clock = gfx_v9_0_kiq_read_clock(adev);
- } else {
- WREG32_SOC15(GC, 0, mmRLC_CAPTURE_GPU_CLOCK_COUNT, 1);
- clock = (uint64_t)RREG32_SOC15(GC, 0, mmRLC_GPU_CLOCK_COUNT_LSB) |
- ((uint64_t)RREG32_SOC15(GC, 0, mmRLC_GPU_CLOCK_COUNT_MSB) << 32ULL);
+ switch (adev->asic_type) {
+ case CHIP_RENOIR:
+ preempt_disable();
+ clock_hi = RREG32_SOC15_NO_KIQ(SMUIO, 0, mmGOLDEN_TSC_COUNT_UPPER_Renoir);
+ clock_lo = RREG32_SOC15_NO_KIQ(SMUIO, 0, mmGOLDEN_TSC_COUNT_LOWER_Renoir);
+ hi_check = RREG32_SOC15_NO_KIQ(SMUIO, 0, mmGOLDEN_TSC_COUNT_UPPER_Renoir);
+ /* The SMUIO TSC clock frequency is 100MHz, which sets 32-bit carry over
+ * roughly every 42 seconds.
+ */
+ if (hi_check != clock_hi) {
+ clock_lo = RREG32_SOC15_NO_KIQ(SMUIO, 0, mmGOLDEN_TSC_COUNT_LOWER_Renoir);
+ clock_hi = hi_check;
+ }
+ preempt_enable();
+ clock = clock_lo | (clock_hi << 32ULL);
+ break;
+ default:
+ amdgpu_gfx_off_ctrl(adev, false);
+ mutex_lock(&adev->gfx.gpu_clock_mutex);
+ if (adev->asic_type == CHIP_VEGA10 && amdgpu_sriov_runtime(adev)) {
+ clock = gfx_v9_0_kiq_read_clock(adev);
+ } else {
+ WREG32_SOC15(GC, 0, mmRLC_CAPTURE_GPU_CLOCK_COUNT, 1);
+ clock = (uint64_t)RREG32_SOC15(GC, 0, mmRLC_GPU_CLOCK_COUNT_LSB) |
+ ((uint64_t)RREG32_SOC15(GC, 0, mmRLC_GPU_CLOCK_COUNT_MSB) << 32ULL);
+ }
+ mutex_unlock(&adev->gfx.gpu_clock_mutex);
+ amdgpu_gfx_off_ctrl(adev, true);
+ break;
}
- mutex_unlock(&adev->gfx.gpu_clock_mutex);
- amdgpu_gfx_off_ctrl(adev, true);
return clock;
}
^ permalink raw reply [flat|nested] 131+ messages in thread* Re: [PATCH 5.10 000/121] 5.10.83-rc1 review
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (120 preceding siblings ...)
2021-11-29 18:19 ` [PATCH 5.10 121/121] drm/amdgpu/gfx9: switch to golden tsc registers for renoir+ Greg Kroah-Hartman
@ 2021-11-30 1:03 ` Shuah Khan
2021-11-30 1:22 ` Samuel Zou
` (7 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Shuah Khan @ 2021-11-30 1:03 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable, Shuah Khan
On 11/29/21 11:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.83 release.
> There are 121 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.83-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 131+ messages in thread* Re: [PATCH 5.10 000/121] 5.10.83-rc1 review
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (121 preceding siblings ...)
2021-11-30 1:03 ` [PATCH 5.10 000/121] 5.10.83-rc1 review Shuah Khan
@ 2021-11-30 1:22 ` Samuel Zou
2021-11-30 4:02 ` Florian Fainelli
` (6 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Samuel Zou @ 2021-11-30 1:22 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable
On 2021/11/30 2:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.83 release.
> There are 121 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.83-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 5.10.83-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.83-rc1
Commit: 35674c284fc5a17551d5df7c9af8a9737760dbfe
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9019
passed: 9019
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9019
passed: 9019
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <hulkrobot@huawei.com>
^ permalink raw reply [flat|nested] 131+ messages in thread* Re: [PATCH 5.10 000/121] 5.10.83-rc1 review
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (122 preceding siblings ...)
2021-11-30 1:22 ` Samuel Zou
@ 2021-11-30 4:02 ` Florian Fainelli
2021-11-30 5:55 ` Naresh Kamboju
` (5 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Florian Fainelli @ 2021-11-30 4:02 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, stable
On 11/29/2021 10:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.83 release.
> There are 121 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.83-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian
^ permalink raw reply [flat|nested] 131+ messages in thread* Re: [PATCH 5.10 000/121] 5.10.83-rc1 review
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (123 preceding siblings ...)
2021-11-30 4:02 ` Florian Fainelli
@ 2021-11-30 5:55 ` Naresh Kamboju
2021-11-30 8:43 ` Jon Hunter
` (4 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Naresh Kamboju @ 2021-11-30 5:55 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, shuah, f.fainelli, patches, lkft-triage, jonathanh,
stable, pavel, akpm, torvalds, linux
On Tue, 30 Nov 2021 at 00:01, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.83 release.
> There are 121 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.83-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
## Build
* kernel: 5.10.83-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.10.y
* git commit: cd4fd0597d3787df6c6771a7b41379d35a8f31b0
* git describe: v5.10.82-122-gcd4fd0597d37
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.82-122-gcd4fd0597d37
## No regressions (compared to v5.10.81-155-gf8f271281cd8)
## No fixes (compared to v5.10.81-155-gf8f271281cd8)
## Test result summary
total: 86505, pass: 73579, fail: 512, skip: 11613, xfail: 801
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 259 total, 259 passed, 0 failed
* arm64: 37 total, 37 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 36 total, 36 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 34 total, 34 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 54 total, 46 passed, 8 failed
* riscv: 24 total, 24 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 20 total, 20 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 37 total, 37 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 131+ messages in thread* Re: [PATCH 5.10 000/121] 5.10.83-rc1 review
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (124 preceding siblings ...)
2021-11-30 5:55 ` Naresh Kamboju
@ 2021-11-30 8:43 ` Jon Hunter
2021-11-30 12:04 ` Fox Chen
` (3 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Jon Hunter @ 2021-11-30 8:43 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, stable, linux-tegra
On Mon, 29 Nov 2021 19:17:11 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.83 release.
> There are 121 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.83-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v5.10:
10 builds: 10 pass, 0 fail
28 boots: 28 pass, 0 fail
75 tests: 75 pass, 0 fail
Linux version: 5.10.83-rc1-gcd4fd0597d37
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Jon
^ permalink raw reply [flat|nested] 131+ messages in thread* RE: [PATCH 5.10 000/121] 5.10.83-rc1 review
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (125 preceding siblings ...)
2021-11-30 8:43 ` Jon Hunter
@ 2021-11-30 12:04 ` Fox Chen
2021-11-30 13:35 ` Sudip Mukherjee
` (2 subsequent siblings)
129 siblings, 0 replies; 131+ messages in thread
From: Fox Chen @ 2021-11-30 12:04 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, stable, Fox Chen
On Mon, 29 Nov 2021 19:17:11 +0100, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.10.83 release.
> There are 121 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.83-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.10.83-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <foxhlchen@gmail.com>
^ permalink raw reply [flat|nested] 131+ messages in thread* Re: [PATCH 5.10 000/121] 5.10.83-rc1 review
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (126 preceding siblings ...)
2021-11-30 12:04 ` Fox Chen
@ 2021-11-30 13:35 ` Sudip Mukherjee
2021-11-30 16:03 ` Pavel Machek
2021-11-30 17:41 ` Guenter Roeck
129 siblings, 0 replies; 131+ messages in thread
From: Sudip Mukherjee @ 2021-11-30 13:35 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, stable
Hi Greg,
On Mon, Nov 29, 2021 at 07:17:11PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.83 release.
> There are 121 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.2.1 20211112): 63 configs -> no new failure
arm (gcc version 11.2.1 20211112): 105 configs -> no new failure
arm64 (gcc version 11.2.1 20211112): 3 configs -> no failure
x86_64 (gcc version 11.2.1 20211112): 4 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
[1]. https://openqa.qa.codethink.co.uk/tests/455
[2]. https://openqa.qa.codethink.co.uk/tests/450
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
--
Regards
Sudip
^ permalink raw reply [flat|nested] 131+ messages in thread* Re: [PATCH 5.10 000/121] 5.10.83-rc1 review
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (127 preceding siblings ...)
2021-11-30 13:35 ` Sudip Mukherjee
@ 2021-11-30 16:03 ` Pavel Machek
2021-11-30 17:41 ` Guenter Roeck
129 siblings, 0 replies; 131+ messages in thread
From: Pavel Machek @ 2021-11-30 16:03 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, stable
[-- Attachment #1: Type: text/plain, Size: 663 bytes --]
Hi!
> This is the start of the stable review cycle for the 5.10.83 release.
> There are 121 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 131+ messages in thread* Re: [PATCH 5.10 000/121] 5.10.83-rc1 review
2021-11-29 18:17 [PATCH 5.10 000/121] 5.10.83-rc1 review Greg Kroah-Hartman
` (128 preceding siblings ...)
2021-11-30 16:03 ` Pavel Machek
@ 2021-11-30 17:41 ` Guenter Roeck
129 siblings, 0 replies; 131+ messages in thread
From: Guenter Roeck @ 2021-11-30 17:41 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable
On Mon, Nov 29, 2021 at 07:17:11PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.83 release.
> There are 121 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 159 pass: 159 fail: 0
Qemu test results:
total: 474 pass: 474 fail: 0
Tested-by: Guenter Roeck <linux@roeck-us.net>
Guenter
^ permalink raw reply [flat|nested] 131+ messages in thread