[PATCH 5.4 00/71] 5.4.168-rc1 review

[PATCH 5.4 00/71] 5.4.168-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.168 release.
There are 71 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.168-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.168-rc1

Juergen Gross <jgross@suse.com>
    xen/netback: don't queue unlimited number of packages

Juergen Gross <jgross@suse.com>
    xen/netback: fix rx queue stall detection

Juergen Gross <jgross@suse.com>
    xen/console: harden hvc_xen against event channel storms

Juergen Gross <jgross@suse.com>
    xen/netfront: harden netfront against event channel storms

Juergen Gross <jgross@suse.com>
    xen/blkfront: harden blkfront against event channel storms

Magnus Karlsson <magnus.karlsson@intel.com>
    Revert "xsk: Do not sleep in poll() when need_wakeup set"

Leon Romanovsky <leonro@nvidia.com>
    net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info

Felix Fietkau <nbd@nbd.name>
    mac80211: fix regression in SSN handling of addba tx

Paul E. McKenney <paulmck@kernel.org>
    rcu: Mark accesses to rcu_state.n_force_qs

George Kennedy <george.kennedy@oracle.com>
    scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()

Miklos Szeredi <mszeredi@redhat.com>
    ovl: fix warning in ovl_create_real()

Miklos Szeredi <mszeredi@redhat.com>
    fuse: annotate lock in fuse_reverse_inval_entry()

Pavel Skripkin <paskripkin@gmail.com>
    media: mxl111sf: change mutex_init() location

Magnus Karlsson <magnus.karlsson@intel.com>
    xsk: Do not sleep in poll() when need_wakeup set

Fabio Estevam <festevam@gmail.com>
    ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name

Nathan Chancellor <nathan@kernel.org>
    Input: touchscreen - avoid bitwise vs logical OR warning

Nathan Chancellor <natechancellor@gmail.com>
    mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO

Johannes Berg <johannes.berg@intel.com>
    mac80211: validate extended element ID is present

Le Ma <le.ma@amd.com>
    drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORE

George Kennedy <george.kennedy@oracle.com>
    libata: if T_LENGTH is zero, dma direction should be DMA_NONE

Yu Liao <liaoyu15@huawei.com>
    timekeeping: Really make sure wall_to_monotonic isn't positive

Daniele Palmas <dnlplm@gmail.com>
    USB: serial: option: add Telit FN990 compositions

Johan Hovold <johan@kernel.org>
    USB: serial: cp210x: fix CP2105 GPIO registration

Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
    usb: xhci: Extend support for runtime power management for AMD's Yellow carp.

Stefan Roese <sr@denx.de>
    PCI/MSI: Mask MSI-X vectors only on success

Thomas Gleixner <tglx@linutronix.de>
    PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error

Jimmy Wang <wangjm221@gmail.com>
    USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    USB: gadget: bRequestType is a bitfield, not a enum

Eric Dumazet <edumazet@google.com>
    sit: do not call ipip6_dev_free() from sit_init_net()

Florian Fainelli <f.fainelli@gmail.com>
    net: systemport: Add global locking for descriptor lifecycle

D. Wythe <alibuda@linux.alibaba.com>
    net/smc: Prevent smc_release() from long blocking

Gal Pressman <gal@nvidia.com>
    net: Fix double 0x prefix print in SKB dump

Willem de Bruijn <willemb@google.com>
    net/packet: rx_owner_map depends on pg_vec

Haimin Zhang <tcs.kernel@gmail.com>
    netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc

Cyril Novikov <cnovikov@lynx.com>
    ixgbe: set X550 MDIO speed before talking to PHY

Letu Ren <fantasquex@gmail.com>
    igbvf: fix double free in `igbvf_probe`

Karen Sornek <karen.sornek@intel.com>
    igb: Fix removal of unicast MAC filters of VFs

Nathan Chancellor <nathan@kernel.org>
    soc/tegra: fuse: Fix bitwise vs. logical OR warning

Hangyu Hua <hbh25y@gmail.com>
    rds: memory leak in __rds_conn_create()

Baowen Zheng <baowen.zheng@corigine.com>
    flow_offload: return EOPNOTSUPP for the unsupported mpls action type

Vlad Buslov <vladbu@mellanox.com>
    net: sched: lock action when translating it to flow_action infra

Johannes Berg <johannes.berg@intel.com>
    mac80211: fix lookup when adding AddBA extension element

Johannes Berg <johannes.berg@intel.com>
    mac80211: accept aggregation sessions on 6 GHz

Johannes Berg <johannes.berg@intel.com>
    mac80211: agg-tx: don't schedule_and_wake_txq() under sta->lock

Mordechay Goodstein <mordechay.goodstein@intel.com>
    mac80211: agg-tx: refactor sending addba

Hangbin Liu <liuhangbin@gmail.com>
    selftest/net/forwarding: declare NETIFS p9 p10

Alyssa Ross <hi@alyssa.is>
    dmaengine: st_fdma: fix MODULE_ALIAS

David Ahern <dsahern@kernel.org>
    selftests: Fix IPv6 address bind tests

David Ahern <dsahern@kernel.org>
    selftests: Fix raw socket bind tests with VRF

Eric Dumazet <edumazet@google.com>
    inet_diag: fix kernel-infoleak for UDP sockets

Eric Dumazet <edumazet@google.com>
    inet_diag: use jiffies_delta_to_msecs()

Eric Dumazet <edumazet@google.com>
    sch_cake: do not call cake_destroy() from cake_init()

Philipp Rudo <prudo@redhat.com>
    s390/kexec_file: fix error handling when applying relocations

Jie2x Zhou <jie2x.zhou@intel.com>
    selftests: net: Correct ping6 expected rc from 2 to 1

Mike Tipton <quic_mdtipton@quicinc.com>
    clk: Don't parent clks until the parent is fully registered

Dinh Nguyen <dinguyen@kernel.org>
    ARM: socfpga: dts: fix qspi node compatible

Randy Dunlap <rdunlap@infradead.org>
    hv: utils: add PTP_1588_CLOCK to Kconfig to fix build

Johannes Berg <johannes.berg@intel.com>
    mac80211: track only QoS data frames for admission control

Alex Bee <knaerzche@gmail.com>
    arm64: dts: rockchip: fix audio-supply for Rock Pi 4

John Keeping <john@metanate.com>
    arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply

Artem Lapkin <email2tema@gmail.com>
    arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge

J. Bruce Fields <bfields@redhat.com>
    nfsd: fix use-after-free due to delegation race

Fabrice Gasnier <fabrice.gasnier@foss.st.com>
    iio: adc: stm32: fix a current leak by resetting pcsel before disabling vdda

Paul Moore <paul@paul-moore.com>
    audit: improve robustness of the audit queue handling

Joe Thornber <ejt@redhat.com>
    dm btree remove: fix use after free in rebalance_children()

Jerome Marchand <jmarchan@redhat.com>
    recordmcount.pl: look for jgnop instruction as well as bcrl on s390

Will Deacon <will@kernel.org>
    virtio_ring: Fix querying of maximum DMA mapping size for virtio device

Sudeep Holla <sudeep.holla@arm.com>
    firmware: arm_scpi: Fix string overflow in SCPI genpd driver

Felix Fietkau <nbd@nbd.name>
    mac80211: send ADDBA requests using the tid/queue of the aggregation session

Johannes Berg <johannes.berg@intel.com>
    mac80211: mark TX-during-stop for TX in in_reconfig

Vitaly Kuznetsov <vkuznets@redhat.com>
    KVM: selftests: Make sure kvm_create_max_vcpus test won't hit RLIMIT_NOFILE


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/dts/imx6ull-pinfunc.h                |   2 +-
 arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts   |   2 +-
 arch/arm/boot/dts/socfpga_arria5_socdk.dts         |   2 +-
 arch/arm/boot/dts/socfpga_cyclone5_socdk.dts       |   2 +-
 arch/arm/boot/dts/socfpga_cyclone5_sockit.dts      |   2 +-
 arch/arm/boot/dts/socfpga_cyclone5_socrates.dts    |   2 +-
 arch/arm/boot/dts/socfpga_cyclone5_sodia.dts       |   2 +-
 arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts |   4 +-
 .../boot/dts/rockchip/rk3399-khadas-edge.dtsi      |   1 -
 arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts  |   2 +-
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts  |   2 +-
 arch/s390/kernel/machine_kexec_file.c              |   7 +-
 drivers/ata/libata-scsi.c                          |  15 ++-
 drivers/block/xen-blkfront.c                       |  15 ++-
 drivers/clk/clk.c                                  |  15 ++-
 drivers/dma/st_fdma.c                              |   2 +-
 drivers/firmware/scpi_pm_domain.c                  |  10 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c              |   4 +-
 drivers/hv/Kconfig                                 |   1 +
 drivers/iio/adc/stm32-adc.c                        |   1 +
 drivers/input/touchscreen/of_touchscreen.c         |  18 +--
 drivers/md/persistent-data/dm-btree-remove.c       |   2 +-
 drivers/media/usb/dvb-usb-v2/mxl111sf.c            |  16 ++-
 drivers/net/ethernet/broadcom/bcmsysport.c         |   5 +-
 drivers/net/ethernet/broadcom/bcmsysport.h         |   1 +
 drivers/net/ethernet/intel/igb/igb_main.c          |  28 ++---
 drivers/net/ethernet/intel/igbvf/netdev.c          |   1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c      |   3 +
 drivers/net/netdevsim/bpf.c                        |   1 +
 drivers/net/wireless/marvell/mwifiex/cmdevt.c      |   4 +-
 drivers/net/wireless/marvell/mwifiex/fw.h          |   8 +-
 drivers/net/xen-netback/common.h                   |   1 +
 drivers/net/xen-netback/rx.c                       |  77 ++++++++-----
 drivers/net/xen-netfront.c                         | 125 ++++++++++++++++-----
 drivers/pci/msi.c                                  |  15 ++-
 drivers/scsi/scsi_debug.c                          |   4 +-
 drivers/soc/tegra/fuse/fuse-tegra.c                |   2 +-
 drivers/soc/tegra/fuse/fuse.h                      |   2 +-
 drivers/tty/hvc/hvc_xen.c                          |  30 ++++-
 drivers/usb/core/quirks.c                          |   3 +
 drivers/usb/gadget/composite.c                     |   6 +-
 drivers/usb/gadget/legacy/dbgp.c                   |   6 +-
 drivers/usb/gadget/legacy/inode.c                  |   6 +-
 drivers/usb/host/xhci-pci.c                        |   6 +-
 drivers/usb/serial/cp210x.c                        |   6 +-
 drivers/usb/serial/option.c                        |   8 ++
 drivers/virtio/virtio_ring.c                       |   2 +-
 fs/fuse/dir.c                                      |   2 +-
 fs/nfsd/nfs4state.c                                |   9 +-
 fs/overlayfs/dir.c                                 |   3 +-
 fs/overlayfs/overlayfs.h                           |   1 +
 fs/overlayfs/super.c                               |  12 +-
 include/net/tc_act/tc_tunnel_key.h                 |   7 +-
 kernel/audit.c                                     |  21 ++--
 kernel/rcu/tree.c                                  |  10 +-
 kernel/time/timekeeping.c                          |   3 +-
 net/core/skbuff.c                                  |   2 +-
 net/ipv4/inet_diag.c                               |  19 ++--
 net/ipv6/sit.c                                     |   1 -
 net/mac80211/agg-rx.c                              |   8 +-
 net/mac80211/agg-tx.c                              |  80 ++++++++-----
 net/mac80211/driver-ops.h                          |   5 +-
 net/mac80211/mlme.c                                |  13 ++-
 net/mac80211/sta_info.h                            |   1 +
 net/mac80211/util.c                                |   2 +
 net/packet/af_packet.c                             |   5 +-
 net/rds/connection.c                               |   1 +
 net/sched/act_sample.c                             |   2 -
 net/sched/cls_api.c                                |  18 ++-
 net/sched/sch_cake.c                               |   6 +-
 net/smc/af_smc.c                                   |   4 +-
 scripts/recordmcount.pl                            |   2 +-
 tools/testing/selftests/kvm/kvm_create_max_vcpus.c |  30 +++++
 tools/testing/selftests/net/fcnal-test.sh          |  23 ++--
 .../net/forwarding/forwarding.config.sample        |   2 +
 76 files changed, 525 insertions(+), 250 deletions(-)

[PATCH 5.4 01/71] KVM: selftests: Make sure kvm_create_max_vcpus test wont hit RLIMIT_NOFILE

[Greg Kroah-Hartman]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 908fa88e420f30dde6d80f092795a18ec72ca6d3 ]

With the elevated 'KVM_CAP_MAX_VCPUS' value kvm_create_max_vcpus test
may hit RLIMIT_NOFILE limits:

 # ./kvm_create_max_vcpus
 KVM_CAP_MAX_VCPU_ID: 4096
 KVM_CAP_MAX_VCPUS: 1024
 Testing creating 1024 vCPUs, with IDs 0...1023.
 /dev/kvm not available (errno: 24), skipping test

Adjust RLIMIT_NOFILE limits to make sure KVM_CAP_MAX_VCPUS fds can be
opened. Note, raising hard limit ('rlim_max') requires CAP_SYS_RESOURCE
capability which is generally not needed to run kvm selftests (but without
raising the limit the test is doomed to fail anyway).

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211123135953.667434-1-vkuznets@redhat.com>
[Skip the test if the hard limit can be raised. - Paolo]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/kvm/kvm_create_max_vcpus.c |   30 +++++++++++++++++++++
 1 file changed, 30 insertions(+)

--- a/tools/testing/selftests/kvm/kvm_create_max_vcpus.c
+++ b/tools/testing/selftests/kvm/kvm_create_max_vcpus.c
@@ -12,6 +12,7 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
+#include <sys/resource.h>
 
 #include "test_util.h"
 
@@ -43,11 +44,40 @@ int main(int argc, char *argv[])
 {
 	int kvm_max_vcpu_id = kvm_check_cap(KVM_CAP_MAX_VCPU_ID);
 	int kvm_max_vcpus = kvm_check_cap(KVM_CAP_MAX_VCPUS);
+	/*
+	 * Number of file descriptors reqired, KVM_CAP_MAX_VCPUS for vCPU fds +
+	 * an arbitrary number for everything else.
+	 */
+	int nr_fds_wanted = kvm_max_vcpus + 100;
+	struct rlimit rl;
 
 	printf("KVM_CAP_MAX_VCPU_ID: %d\n", kvm_max_vcpu_id);
 	printf("KVM_CAP_MAX_VCPUS: %d\n", kvm_max_vcpus);
 
 	/*
+	 * Check that we're allowed to open nr_fds_wanted file descriptors and
+	 * try raising the limits if needed.
+	 */
+	TEST_ASSERT(!getrlimit(RLIMIT_NOFILE, &rl), "getrlimit() failed!");
+
+	if (rl.rlim_cur < nr_fds_wanted) {
+		rl.rlim_cur = nr_fds_wanted;
+		if (rl.rlim_max < nr_fds_wanted) {
+			int old_rlim_max = rl.rlim_max;
+			rl.rlim_max = nr_fds_wanted;
+
+			int r = setrlimit(RLIMIT_NOFILE, &rl);
+			if (r < 0) {
+				printf("RLIMIT_NOFILE hard limit is too low (%d, wanted %d)\n",
+				       old_rlim_max, nr_fds_wanted);
+				exit(KSFT_SKIP);
+			}
+		} else {
+			TEST_ASSERT(!setrlimit(RLIMIT_NOFILE, &rl), "setrlimit() failed!");
+		}
+	}
+
+	/*
 	 * Upstream KVM prior to 4.8 does not support KVM_CAP_MAX_VCPU_ID.
 	 * Userspace is supposed to use KVM_CAP_MAX_VCPUS as the maximum ID
 	 * in this case.

[PATCH 5.4 02/71] mac80211: mark TX-during-stop for TX in in_reconfig

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit db7205af049d230e7e0abf61c1e74c1aab40f390 upstream.

Mark TXQs as having seen transmit while they were stopped if
we bail out of drv_wake_tx_queue() due to reconfig, so that
the queue wake after this will make them catch up. This is
particularly necessary for when TXQs are used for management
packets since those TXQs won't see a lot of traffic that'd
make them catch up later.

Cc: stable@vger.kernel.org
Fixes: 4856bfd23098 ("mac80211: do not call driver wake_tx_queue op during reconfig")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.4573a221c0e1.I0d1d5daea3089be3fc0dccc92991b0f8c5677f0c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/driver-ops.h |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -1202,8 +1202,11 @@ static inline void drv_wake_tx_queue(str
 {
 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(txq->txq.vif);
 
-	if (local->in_reconfig)
+	/* In reconfig don't transmit now, but mark for waking later */
+	if (local->in_reconfig) {
+		set_bit(IEEE80211_TXQ_STOP_NETIF_TX, &txq->flags);
 		return;
+	}
 
 	if (!check_sdata_in_driver(sdata))
 		return;

[PATCH 5.4 03/71] mac80211: send ADDBA requests using the tid/queue of the aggregation session

[Greg Kroah-Hartman]

From: Felix Fietkau <nbd@nbd.name>

commit 1fe98f5690c4219d419ea9cc190f94b3401cf324 upstream.

Sending them out on a different queue can cause a race condition where a
number of packets in the queue may be discarded by the receiver, because
the ADDBA request is sent too early.
This affects any driver with software A-MPDU setup which does not allocate
packet seqno in hardware on tx, regardless of whether iTXQ is used or not.
The only driver I've seen that explicitly deals with this issue internally
is mwl8k.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20211202124533.80388-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/agg-tx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -106,7 +106,7 @@ static void ieee80211_send_addba_request
 	mgmt->u.action.u.addba_req.start_seq_num =
 					cpu_to_le16(start_seq_num << 4);
 
-	ieee80211_tx_skb(sdata, skb);
+	ieee80211_tx_skb_tid(sdata, skb, tid);
 }
 
 void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn)

[PATCH 5.4 04/71] firmware: arm_scpi: Fix string overflow in SCPI genpd driver

[Greg Kroah-Hartman]

From: Sudeep Holla <sudeep.holla@arm.com>

commit 865ed67ab955428b9aa771d8b4f1e4fb7fd08945 upstream.

Without the bound checks for scpi_pd->name, it could result in the buffer
overflow when copying the SCPI device name from the corresponding device
tree node as the name string is set at maximum size of 30.

Let us fix it by using devm_kasprintf so that the string buffer is
allocated dynamically.

Fixes: 8bec4337ad40 ("firmware: scpi: add device power domain support using genpd")
Reported-by: Pedro Batista <pedbap.g@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20211209120456.696879-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firmware/scpi_pm_domain.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/firmware/scpi_pm_domain.c
+++ b/drivers/firmware/scpi_pm_domain.c
@@ -16,7 +16,6 @@ struct scpi_pm_domain {
 	struct generic_pm_domain genpd;
 	struct scpi_ops *ops;
 	u32 domain;
-	char name[30];
 };
 
 /*
@@ -110,8 +109,13 @@ static int scpi_pm_domain_probe(struct p
 
 		scpi_pd->domain = i;
 		scpi_pd->ops = scpi_ops;
-		sprintf(scpi_pd->name, "%pOFn.%d", np, i);
-		scpi_pd->genpd.name = scpi_pd->name;
+		scpi_pd->genpd.name = devm_kasprintf(dev, GFP_KERNEL,
+						     "%pOFn.%d", np, i);
+		if (!scpi_pd->genpd.name) {
+			dev_err(dev, "Failed to allocate genpd name:%pOFn.%d\n",
+				np, i);
+			continue;
+		}
 		scpi_pd->genpd.power_off = scpi_pd_power_off;
 		scpi_pd->genpd.power_on = scpi_pd_power_on;
 

[PATCH 5.4 05/71] virtio_ring: Fix querying of maximum DMA mapping size for virtio device

[Greg Kroah-Hartman]

From: Will Deacon <will@kernel.org>

commit 817fc978b5a29b039db0418a91072b31c9aab152 upstream.

virtio_max_dma_size() returns the maximum DMA mapping size of the virtio
device by querying dma_max_mapping_size() for the device when the DMA
API is in use for the vring. Unfortunately, the device passed is
initialised by register_virtio_device() and does not inherit the DMA
configuration from its parent, resulting in SWIOTLB errors when bouncing
is enabled and the default 256K mapping limit (IO_TLB_SEGSIZE) is not
respected:

  | virtio-pci 0000:00:01.0: swiotlb buffer is full (sz: 294912 bytes), total 1024 (slots), used 725 (slots)

Follow the pattern used elsewhere in the virtio_ring code when calling
into the DMA layer and pass the parent device to dma_max_mapping_size()
instead.

Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20211201112018.25276-1-will@kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Fixes: e6d6dd6c875e ("virtio: Introduce virtio_max_dma_size()")
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/virtio/virtio_ring.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -263,7 +263,7 @@ size_t virtio_max_dma_size(struct virtio
 	size_t max_segment_size = SIZE_MAX;
 
 	if (vring_use_dma_api(vdev))
-		max_segment_size = dma_max_mapping_size(&vdev->dev);
+		max_segment_size = dma_max_mapping_size(vdev->dev.parent);
 
 	return max_segment_size;
 }

[PATCH 5.4 06/71] recordmcount.pl: look for jgnop instruction as well as bcrl on s390

[Greg Kroah-Hartman]

From: Jerome Marchand <jmarchan@redhat.com>

commit 85bf17b28f97ca2749968d8786dc423db320d9c2 upstream.

On s390, recordmcount.pl is looking for "bcrl 0,<xxx>" instructions in
the objdump -d outpout. However since binutils 2.37, objdump -d
display "jgnop <xxx>" for the same instruction. Update the
mcount_regex so that it accepts both.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211210093827.1623286-1-jmarchan@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/recordmcount.pl |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -252,7 +252,7 @@ if ($arch eq "x86_64") {
 
 } elsif ($arch eq "s390" && $bits == 64) {
     if ($cc =~ /-DCC_USING_HOTPATCH/) {
-	$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*c0 04 00 00 00 00\\s*brcl\\s*0,[0-9a-f]+ <([^\+]*)>\$";
+	$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*c0 04 00 00 00 00\\s*(bcrl\\s*0,|jgnop\\s*)[0-9a-f]+ <([^\+]*)>\$";
 	$mcount_adjust = 0;
     } else {
 	$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$";

[PATCH 5.4 07/71] dm btree remove: fix use after free in rebalance_children()

[Greg Kroah-Hartman]

From: Joe Thornber <ejt@redhat.com>

commit 1b8d2789dad0005fd5e7d35dab26a8e1203fb6da upstream.

Move dm_tm_unlock() after dm_tm_dec().

Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/persistent-data/dm-btree-remove.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/persistent-data/dm-btree-remove.c
+++ b/drivers/md/persistent-data/dm-btree-remove.c
@@ -423,9 +423,9 @@ static int rebalance_children(struct sha
 
 		memcpy(n, dm_block_data(child),
 		       dm_bm_block_size(dm_tm_get_bm(info->tm)));
-		dm_tm_unlock(info->tm, child);
 
 		dm_tm_dec(info->tm, dm_block_location(child));
+		dm_tm_unlock(info->tm, child);
 		return 0;
 	}
 

[PATCH 5.4 08/71] audit: improve robustness of the audit queue handling

[Greg Kroah-Hartman]

From: Paul Moore <paul@paul-moore.com>

commit f4b3ee3c85551d2d343a3ba159304066523f730f upstream.

If the audit daemon were ever to get stuck in a stopped state the
kernel's kauditd_thread() could get blocked attempting to send audit
records to the userspace audit daemon.  With the kernel thread
blocked it is possible that the audit queue could grow unbounded as
certain audit record generating events must be exempt from the queue
limits else the system enter a deadlock state.

This patch resolves this problem by lowering the kernel thread's
socket sending timeout from MAX_SCHEDULE_TIMEOUT to HZ/10 and tweaks
the kauditd_send_queue() function to better manage the various audit
queues when connection problems occur between the kernel and the
audit daemon.  With this patch, the backlog may temporarily grow
beyond the defined limits when the audit daemon is stopped and the
system is under heavy audit pressure, but kauditd_thread() will
continue to make progress and drain the queues as it would for other
connection problems.  For example, with the audit daemon put into a
stopped state and the system configured to audit every syscall it
was still possible to shutdown the system without a kernel panic,
deadlock, etc.; granted, the system was slow to shutdown but that is
to be expected given the extreme pressure of recording every syscall.

The timeout value of HZ/10 was chosen primarily through
experimentation and this developer's "gut feeling".  There is likely
no one perfect value, but as this scenario is limited in scope (root
privileges would be needed to send SIGSTOP to the audit daemon), it
is likely not worth exposing this as a tunable at present.  This can
always be done at a later date if it proves necessary.

Cc: stable@vger.kernel.org
Fixes: 5b52330bbfe63 ("audit: fix auditd/kernel connection state tracking")
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/audit.c |   21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -712,7 +712,7 @@ static int kauditd_send_queue(struct soc
 {
 	int rc = 0;
 	struct sk_buff *skb;
-	static unsigned int failed = 0;
+	unsigned int failed = 0;
 
 	/* NOTE: kauditd_thread takes care of all our locking, we just use
 	 *       the netlink info passed to us (e.g. sk and portid) */
@@ -729,32 +729,30 @@ static int kauditd_send_queue(struct soc
 			continue;
 		}
 
+retry:
 		/* grab an extra skb reference in case of error */
 		skb_get(skb);
 		rc = netlink_unicast(sk, skb, portid, 0);
 		if (rc < 0) {
-			/* fatal failure for our queue flush attempt? */
+			/* send failed - try a few times unless fatal error */
 			if (++failed >= retry_limit ||
 			    rc == -ECONNREFUSED || rc == -EPERM) {
-				/* yes - error processing for the queue */
 				sk = NULL;
 				if (err_hook)
 					(*err_hook)(skb);
-				if (!skb_hook)
-					goto out;
-				/* keep processing with the skb_hook */
+				if (rc == -EAGAIN)
+					rc = 0;
+				/* continue to drain the queue */
 				continue;
 			} else
-				/* no - requeue to preserve ordering */
-				skb_queue_head(queue, skb);
+				goto retry;
 		} else {
-			/* it worked - drop the extra reference and continue */
+			/* skb sent - drop the extra reference and continue */
 			consume_skb(skb);
 			failed = 0;
 		}
 	}
 
-out:
 	return (rc >= 0 ? 0 : rc);
 }
 
@@ -1557,7 +1555,8 @@ static int __net_init audit_net_init(str
 		audit_panic("cannot initialize netlink socket in namespace");
 		return -ENOMEM;
 	}
-	aunet->sk->sk_sndtimeo = MAX_SCHEDULE_TIMEOUT;
+	/* limit the timeout in case auditd is blocked/stopped */
+	aunet->sk->sk_sndtimeo = HZ / 10;
 
 	return 0;
 }

[PATCH 5.4 09/71] iio: adc: stm32: fix a current leak by resetting pcsel before disabling vdda

[Greg Kroah-Hartman]

From: Fabrice Gasnier <fabrice.gasnier@foss.st.com>

commit f711f28e71e965c0d1141c830fa7131b41abbe75 upstream.

Some I/Os are connected to ADC input channels, when the corresponding bit
in PCSEL register are set on STM32H7 and STM32MP15. This is done in the
prepare routine of stm32-adc driver.
There are constraints here, as PCSEL shouldn't be set when VDDA supply
is disabled. Enabling/disabling of VDDA supply in done via stm32-adc-core
runtime PM routines (before/after ADC is enabled/disabled).

Currently, PCSEL remains set when disabling ADC. Later on, PM runtime
can disable the VDDA supply. This creates some conditions on I/Os that
can start to leak current.
So PCSEL needs to be cleared when disabling the ADC.

Fixes: 95e339b6e85d ("iio: adc: stm32: add support for STM32H7")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/1634905169-23762-1-git-send-email-fabrice.gasnier@foss.st.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/adc/stm32-adc.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -933,6 +933,7 @@ pwr_dwn:
 
 static void stm32h7_adc_unprepare(struct stm32_adc *adc)
 {
+	stm32_adc_writel(adc, STM32H7_ADC_PCSEL, 0);
 	stm32h7_adc_disable(adc);
 	stm32h7_adc_enter_pwr_down(adc);
 }

[PATCH 5.4 10/71] nfsd: fix use-after-free due to delegation race

[Greg Kroah-Hartman]

From: J. Bruce Fields <bfields@redhat.com>

commit 548ec0805c399c65ed66c6641be467f717833ab5 upstream.

A delegation break could arrive as soon as we've called vfs_setlease.  A
delegation break runs a callback which immediately (in
nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru.  If we
then exit nfs4_set_delegation without hashing the delegation, it will be
freed as soon as the callback is done with it, without ever being
removed from del_recall_lru.

Symptoms show up later as use-after-free or list corruption warnings,
usually in the laundromat thread.

I suspect aba2072f4523 "nfsd: grant read delegations to clients holding
writes" made this bug easier to hit, but I looked as far back as v3.0
and it looks to me it already had the same problem.  So I'm not sure
where the bug was introduced; it may have been there from the beginning.

Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[Salvatore Bonaccorso: Backport for context changes to versions which do
not have 20b7d86f29d3 ("nfsd: use boottime for lease expiry calculation")]
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/nfs4state.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -1041,6 +1041,11 @@ hash_delegation_locked(struct nfs4_deleg
 	return 0;
 }
 
+static bool delegation_hashed(struct nfs4_delegation *dp)
+{
+	return !(list_empty(&dp->dl_perfile));
+}
+
 static bool
 unhash_delegation_locked(struct nfs4_delegation *dp)
 {
@@ -1048,7 +1053,7 @@ unhash_delegation_locked(struct nfs4_del
 
 	lockdep_assert_held(&state_lock);
 
-	if (list_empty(&dp->dl_perfile))
+	if (!delegation_hashed(dp))
 		return false;
 
 	dp->dl_stid.sc_type = NFS4_CLOSED_DELEG_STID;
@@ -4406,7 +4411,7 @@ static void nfsd4_cb_recall_prepare(stru
 	 * queued for a lease break. Don't queue it again.
 	 */
 	spin_lock(&state_lock);
-	if (dp->dl_time == 0) {
+	if (delegation_hashed(dp) && dp->dl_time == 0) {
 		dp->dl_time = get_seconds();
 		list_add_tail(&dp->dl_recall_lru, &nn->del_recall_lru);
 	}

[PATCH 5.4 11/71] arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge

[Greg Kroah-Hartman]

From: Artem Lapkin <email2tema@gmail.com>

[ Upstream commit 6dd0053683804427529ef3523f7872f473440a19 ]

Remove mmc-hs400-enhanced-strobe from the rk3399-khadas-edge dts to
improve compatibility with a wider range of eMMC chips.

Before (BJTD4R 29.1 GiB):

[    7.001493] mmc2: CQHCI version 5.10
[    7.027971] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
.......
[    7.207086] mmc2: mmc_select_hs400es failed, error -110
[    7.207129] mmc2: error -110 whilst initialising MMC card
[    7.308893] mmc2: mmc_select_hs400es failed, error -110
[    7.308921] mmc2: error -110 whilst initialising MMC card
[    7.427524] mmc2: mmc_select_hs400es failed, error -110
[    7.427546] mmc2: error -110 whilst initialising MMC card
[    7.590993] mmc2: mmc_select_hs400es failed, error -110
[    7.591012] mmc2: error -110 whilst initialising MMC card

After:

[    6.960785] mmc2: CQHCI version 5.10
[    6.984672] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[    7.175021] mmc2: Command Queue Engine enabled
[    7.175053] mmc2: new HS400 MMC card at address 0001
[    7.175808] mmcblk2: mmc2:0001 BJTD4R 29.1 GiB
[    7.176033] mmcblk2boot0: mmc2:0001 BJTD4R 4.00 MiB
[    7.176245] mmcblk2boot1: mmc2:0001 BJTD4R 4.00 MiB
[    7.176495] mmcblk2rpmb: mmc2:0001 BJTD4R 4.00 MiB, chardev (242:0)

Fixes: c2aacceedc86 ("arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards")
Signed-off-by: Artem Lapkin <art@khadas.com>
Link: https://lore.kernel.org/r/20211115083321.2627461-1-art@khadas.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index e87a04477440e..292ca70c512b5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -685,7 +685,6 @@ &sdmmc {
 &sdhci {
 	bus-width = <8>;
 	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };
-- 
2.33.0

[PATCH 5.4 12/71] arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply

[Greg Kroah-Hartman]

From: John Keeping <john@metanate.com>

[ Upstream commit 2b454a90e2ccdd6e03f88f930036da4df577be76 ]

Correct a typo in the vin-supply property.  The input supply is
always-on, so this mistake doesn't affect whether the supply is actually
enabled correctly.

Fixes: fc702ed49a86 ("arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC")
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211102182908.3409670-3-john@metanate.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
index 73be38a537960..a72e77c261ef3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -49,7 +49,7 @@ vcc3v3_lan: vcc3v3-lan {
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vim-supply = <&vcc3v3_sys>;
+		vin-supply = <&vcc3v3_sys>;
 	};
 
 	vcc3v3_sys: vcc3v3-sys {
-- 
2.33.0

[PATCH 5.4 13/71] arm64: dts: rockchip: fix audio-supply for Rock Pi 4

[Greg Kroah-Hartman]

From: Alex Bee <knaerzche@gmail.com>

[ Upstream commit 8240e87f16d17a9592c9d67857a3dcdbcb98f10d ]

As stated in the schematics [1] and [2] P5 the APIO5 domain is supplied
by RK808-D Buck4, which in our case vcc1v8_codec - i.e. a 1.8 V regulator.

Currently only white noise comes from the ES8316's output, which - for
whatever reason - came up only after the the correct switch from i2s0_8ch_bus
to i2s0_2ch_bus for i2s0's pinctrl was done.

Fix this by setting the correct regulator for audio-supply.

[1] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi4_v13_sch_20181112.pdf
[2] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi_4c_v12_sch_20200620.pdf

Fixes: 1b5715c602fd ("arm64: dts: rockchip: add ROCK Pi 4 DTS support")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20211027143726.165809-1-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
index 1ae1ebd4efdd0..da3b031d4befa 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
@@ -452,7 +452,7 @@ &io_domains {
 	status = "okay";
 
 	bt656-supply = <&vcc_3v0>;
-	audio-supply = <&vcc_3v0>;
+	audio-supply = <&vcc1v8_codec>;
 	sdmmc-supply = <&vcc_sdio>;
 	gpio1830-supply = <&vcc_3v0>;
 };
-- 
2.33.0

[PATCH 5.4 14/71] mac80211: track only QoS data frames for admission control

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit d5e568c3a4ec2ddd23e7dc5ad5b0c64e4f22981a ]

For admission control, obviously all of that only works for
QoS data frames, otherwise we cannot even access the QoS
field in the header.

Syzbot reported (see below) an uninitialized value here due
to a status of a non-QoS nullfunc packet, which isn't even
long enough to contain the QoS header.

Fix this to only do anything for QoS data packets.

Reported-by: syzbot+614e82b88a1a4973e534@syzkaller.appspotmail.com
Fixes: 02219b3abca5 ("mac80211: add WMM admission control support")
Link: https://lore.kernel.org/r/20211122124737.dad29e65902a.Ieb04587afacb27c14e0de93ec1bfbefb238cc2a0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index ccaf2389ccc1d..5c727af01143f 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2418,11 +2418,18 @@ static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
 					   u16 tx_time)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-	u16 tid = ieee80211_get_tid(hdr);
-	int ac = ieee80211_ac_from_tid(tid);
-	struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
+	u16 tid;
+	int ac;
+	struct ieee80211_sta_tx_tspec *tx_tspec;
 	unsigned long now = jiffies;
 
+	if (!ieee80211_is_data_qos(hdr->frame_control))
+		return;
+
+	tid = ieee80211_get_tid(hdr);
+	ac = ieee80211_ac_from_tid(tid);
+	tx_tspec = &ifmgd->tx_tspec[ac];
+
 	if (likely(!tx_tspec->admitted_time))
 		return;
 
-- 
2.33.0

[PATCH 5.4 15/71] hv: utils: add PTP_1588_CLOCK to Kconfig to fix build

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 1dc2f2b81a6a9895da59f3915760f6c0c3074492 ]

The hyperv utilities use PTP clock interfaces and should depend a
a kconfig symbol such that they will be built as a loadable module or
builtin so that linker errors do not happen.

Prevents these build errors:

ld: drivers/hv/hv_util.o: in function `hv_timesync_deinit':
hv_util.c:(.text+0x37d): undefined reference to `ptp_clock_unregister'
ld: drivers/hv/hv_util.o: in function `hv_timesync_init':
hv_util.c:(.text+0x738): undefined reference to `ptp_clock_register'

Fixes: 3716a49a81ba ("hv_utils: implement Hyper-V PTP source")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: linux-hyperv@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211126023316.25184-1-rdunlap@infradead.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
index 79e5356a737a2..210e532ac277f 100644
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -17,6 +17,7 @@ config HYPERV_TIMER
 config HYPERV_UTILS
 	tristate "Microsoft Hyper-V Utilities driver"
 	depends on HYPERV && CONNECTOR && NLS
+	depends on PTP_1588_CLOCK_OPTIONAL
 	help
 	  Select this option to enable the Hyper-V Utilities.
 
-- 
2.33.0

[PATCH 5.4 16/71] ARM: socfpga: dts: fix qspi node compatible

[Greg Kroah-Hartman]

From: Dinh Nguyen <dinguyen@kernel.org>

[ Upstream commit cb25b11943cbcc5a34531129952870420f8be858 ]

The QSPI flash node needs to have the required "jedec,spi-nor" in the
compatible string.

Fixes: 1df99da8953 ("ARM: dts: socfpga: Enable QSPI in Arria10 devkit")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts   | 2 +-
 arch/arm/boot/dts/socfpga_arria5_socdk.dts         | 2 +-
 arch/arm/boot/dts/socfpga_cyclone5_socdk.dts       | 2 +-
 arch/arm/boot/dts/socfpga_cyclone5_sockit.dts      | 2 +-
 arch/arm/boot/dts/socfpga_cyclone5_socrates.dts    | 2 +-
 arch/arm/boot/dts/socfpga_cyclone5_sodia.dts       | 2 +-
 arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts | 4 ++--
 7 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
index b4c0a76a4d1af..4c2fcfcc7baed 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
@@ -12,7 +12,7 @@ &qspi {
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00aa";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 90e676e7019f2..1b02d46496a85 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -119,7 +119,7 @@ &qspi {
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 6f138b2b26163..51bb436784e24 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -124,7 +124,7 @@ &qspi {
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;	/* chip select */
 		spi-max-frequency = <100000000>;
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index c155ff02eb6e0..cae9ddd5ed38b 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -169,7 +169,7 @@ &qspi {
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index 8d5d3996f6f27..ca18b959e6559 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -80,7 +80,7 @@ &qspi {
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
index 99a71757cdf46..3f7aa7bf0863a 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -116,7 +116,7 @@ &qspi {
 	flash0: n25q512a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q512a";
+		compatible = "micron,n25q512a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index a060718758b67..25874e1b9c829 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -224,7 +224,7 @@ &qspi {
 	n25q128@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q128";
+		compatible = "micron,n25q128", "jedec,spi-nor";
 		reg = <0>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
@@ -241,7 +241,7 @@ n25q128@0 {
 	n25q00@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <1>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
-- 
2.33.0

[PATCH 5.4 17/71] clk: Dont parent clks until the parent is fully registered

[Greg Kroah-Hartman]

From: Mike Tipton <quic_mdtipton@quicinc.com>

[ Upstream commit 54baf56eaa40aa5cdcd02b3c20d593e4e1211220 ]

Before commit fc0c209c147f ("clk: Allow parents to be specified without
string names") child clks couldn't find their parent until the parent
clk was added to a list in __clk_core_init(). After that commit, child
clks can reference their parent clks directly via a clk_hw pointer, or
they can lookup that clk_hw pointer via DT if the parent clk is
registered with an OF clk provider.

The common clk framework treats hw->core being non-NULL as "the clk is
registered" per the logic within clk_core_fill_parent_index():

	parent = entry->hw->core;
	/*
	 * We have a direct reference but it isn't registered yet?
	 * Orphan it and let clk_reparent() update the orphan status
	 * when the parent is registered.
	 */
	if (!parent)

Therefore we need to be extra careful to not set hw->core until the clk
is fully registered with the clk framework. Otherwise we can get into a
situation where a child finds a parent clk and we move the child clk off
the orphan list when the parent isn't actually registered, wrecking our
enable accounting and breaking critical clks.

Consider the following scenario:

  CPU0                                     CPU1
  ----                                     ----
  struct clk_hw clkBad;
  struct clk_hw clkA;

  clkA.init.parent_hws = { &clkBad };

  clk_hw_register(&clkA)                   clk_hw_register(&clkBad)
   ...                                      __clk_register()
					     hw->core = core
					     ...
   __clk_register()
    __clk_core_init()
     clk_prepare_lock()
     __clk_init_parent()
      clk_core_get_parent_by_index()
       clk_core_fill_parent_index()
        if (entry->hw) {
	 parent = entry->hw->core;

At this point, 'parent' points to clkBad even though clkBad hasn't been
fully registered yet. Ouch! A similar problem can happen if a clk
controller registers orphan clks that are referenced in the DT node of
another clk controller.

Let's fix all this by only setting the hw->core pointer underneath the
clk prepare lock in __clk_core_init(). This way we know that
clk_core_fill_parent_index() can't see hw->core be non-NULL until the
clk is fully registered.

Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names")
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Link: https://lore.kernel.org/r/20211109043438.4639-1-quic_mdtipton@quicinc.com
[sboyd@kernel.org: Reword commit text, update comment]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 6ff87cd867121..e4e1b4e94a67b 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3299,6 +3299,14 @@ static int __clk_core_init(struct clk_core *core)
 
 	clk_prepare_lock();
 
+	/*
+	 * Set hw->core after grabbing the prepare_lock to synchronize with
+	 * callers of clk_core_fill_parent_index() where we treat hw->core
+	 * being NULL as the clk not being registered yet. This is crucial so
+	 * that clks aren't parented until their parent is fully registered.
+	 */
+	core->hw->core = core;
+
 	ret = clk_pm_runtime_get(core);
 	if (ret)
 		goto unlock;
@@ -3452,8 +3460,10 @@ static int __clk_core_init(struct clk_core *core)
 out:
 	clk_pm_runtime_put(core);
 unlock:
-	if (ret)
+	if (ret) {
 		hlist_del_init(&core->child_node);
+		core->hw->core = NULL;
+	}
 
 	clk_prepare_unlock();
 
@@ -3699,7 +3709,6 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
 	core->num_parents = init->num_parents;
 	core->min_rate = 0;
 	core->max_rate = ULONG_MAX;
-	hw->core = core;
 
 	ret = clk_core_populate_parent_map(core, init);
 	if (ret)
@@ -3717,7 +3726,7 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
 		goto fail_create_clk;
 	}
 
-	clk_core_link_consumer(hw->core, hw->clk);
+	clk_core_link_consumer(core, hw->clk);
 
 	ret = __clk_core_init(core);
 	if (!ret)
-- 
2.33.0

[PATCH 5.4 18/71] selftests: net: Correct ping6 expected rc from 2 to 1

[Greg Kroah-Hartman]

From: Jie2x Zhou <jie2x.zhou@intel.com>

[ Upstream commit 92816e2629808726af015c7f5b14adc8e4f8b147 ]

./fcnal-test.sh -v -t ipv6_ping
TEST: ping out, VRF bind - ns-B IPv6 LLA                                      [FAIL]
TEST: ping out, VRF bind - multicast IP                                       [FAIL]

ping6 is failing as it should.
COMMAND: ip netns exec ns-A /bin/ping6 -c1 -w1 fe80::7c4c:bcff:fe66:a63a%red
strace of ping6 shows it is failing with '1',
so change the expected rc from 2 to 1.

Fixes: c0644e71df33 ("selftests: Add ipv6 ping tests to fcnal-test")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com>
Link: https://lore.kernel.org/r/20211209020230.37270-1-jie2x.zhou@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/fcnal-test.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 782a8da5d9500..475ac62373e92 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -1884,7 +1884,7 @@ ipv6_ping_vrf()
 		log_start
 		show_hint "Fails since VRF device does not support linklocal or multicast"
 		run_cmd ${ping6} -c1 -w1 ${a}
-		log_test_addr ${a} $? 2 "ping out, VRF bind"
+		log_test_addr ${a} $? 1 "ping out, VRF bind"
 	done
 
 	for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV}
-- 
2.33.0

[PATCH 5.4 19/71] s390/kexec_file: fix error handling when applying relocations

[Greg Kroah-Hartman]

From: Philipp Rudo <prudo@redhat.com>

[ Upstream commit 41967a37b8eedfee15b81406a9f3015be90d3980 ]

arch_kexec_apply_relocations_add currently ignores all errors returned
by arch_kexec_do_relocs. This means that every unknown relocation is
silently skipped causing unpredictable behavior while the relocated code
runs. Fix this by checking for errors and fail kexec_file_load if an
unknown relocation type is encountered.

The problem was found after gcc changed its behavior and used
R_390_PLT32DBL relocations for brasl instruction and relied on ld to
resolve the relocations in the final link in case direct calls are
possible. As the purgatory code is only linked partially (option -r)
ld didn't resolve the relocations leaving them for arch_kexec_do_relocs.
But arch_kexec_do_relocs doesn't know how to handle R_390_PLT32DBL
relocations so they were silently skipped. This ultimately caused an
endless loop in the purgatory as the brasl instructions kept branching
to itself.

Fixes: 71406883fd35 ("s390/kexec_file: Add kexec_file_load system call")
Reported-by: Tao Liu <ltao@redhat.com>
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Link: https://lore.kernel.org/r/20211208130741.5821-3-prudo@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/machine_kexec_file.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/s390/kernel/machine_kexec_file.c b/arch/s390/kernel/machine_kexec_file.c
index e7435f3a3d2d2..76cd09879eaf4 100644
--- a/arch/s390/kernel/machine_kexec_file.c
+++ b/arch/s390/kernel/machine_kexec_file.c
@@ -277,6 +277,7 @@ int arch_kexec_apply_relocations_add(struct purgatory_info *pi,
 {
 	Elf_Rela *relas;
 	int i, r_type;
+	int ret;
 
 	relas = (void *)pi->ehdr + relsec->sh_offset;
 
@@ -311,7 +312,11 @@ int arch_kexec_apply_relocations_add(struct purgatory_info *pi,
 		addr = section->sh_addr + relas[i].r_offset;
 
 		r_type = ELF64_R_TYPE(relas[i].r_info);
-		arch_kexec_do_relocs(r_type, loc, val, addr);
+		ret = arch_kexec_do_relocs(r_type, loc, val, addr);
+		if (ret) {
+			pr_err("Unknown rela relocation: %d\n", r_type);
+			return -ENOEXEC;
+		}
 	}
 	return 0;
 }
-- 
2.33.0

[PATCH 5.4 20/71] sch_cake: do not call cake_destroy() from cake_init()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit ab443c53916730862cec202078d36fd4008bea79 ]

qdiscs are not supposed to call their own destroy() method
from init(), because core stack already does that.

syzbot was able to trigger use after free:

DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock_common kernel/locking/mutex.c:586 [inline]
WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740
Modules linked in:
CPU: 0 PID: 21902 Comm: syz-executor189 Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__mutex_lock_common kernel/locking/mutex.c:586 [inline]
RIP: 0010:__mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740
Code: 08 84 d2 0f 85 19 08 00 00 8b 05 97 38 4b 04 85 c0 0f 85 27 f7 ff ff 48 c7 c6 20 00 ac 89 48 c7 c7 a0 fe ab 89 e8 bf 76 ba ff <0f> 0b e9 0d f7 ff ff 48 8b 44 24 40 48 8d b8 c8 08 00 00 48 89 f8
RSP: 0018:ffffc9000627f290 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88802315d700 RSI: ffffffff815f1db8 RDI: fffff52000c4fe44
RBP: ffff88818f28e000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815ebb5e R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: ffffc9000627f458 R15: 0000000093c30000
FS:  0000555556abc400(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fda689c3303 CR3: 000000001cfbb000 CR4: 0000000000350ef0
Call Trace:
 <TASK>
 tcf_chain0_head_change_cb_del+0x2e/0x3d0 net/sched/cls_api.c:810
 tcf_block_put_ext net/sched/cls_api.c:1381 [inline]
 tcf_block_put_ext net/sched/cls_api.c:1376 [inline]
 tcf_block_put+0xbc/0x130 net/sched/cls_api.c:1394
 cake_destroy+0x3f/0x80 net/sched/sch_cake.c:2695
 qdisc_create.constprop.0+0x9da/0x10f0 net/sched/sch_api.c:1293
 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660
 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f1bb06badb9
Code: Unable to access opcode bytes at RIP 0x7f1bb06bad8f.
RSP: 002b:00007fff3012a658 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1bb06badb9
RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000003
R10: 0000000000000003 R11: 0000000000000246 R12: 00007fff3012a688
R13: 00007fff3012a6a0 R14: 00007fff3012a6e0 R15: 00000000000013c2
 </TASK>

Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/r/20211210142046.698336-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_cake.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c
index e8eebe40e0ae9..0eb4d4a568f77 100644
--- a/net/sched/sch_cake.c
+++ b/net/sched/sch_cake.c
@@ -2724,7 +2724,7 @@ static int cake_init(struct Qdisc *sch, struct nlattr *opt,
 	q->tins = kvcalloc(CAKE_MAX_TINS, sizeof(struct cake_tin_data),
 			   GFP_KERNEL);
 	if (!q->tins)
-		goto nomem;
+		return -ENOMEM;
 
 	for (i = 0; i < CAKE_MAX_TINS; i++) {
 		struct cake_tin_data *b = q->tins + i;
@@ -2754,10 +2754,6 @@ static int cake_init(struct Qdisc *sch, struct nlattr *opt,
 	q->min_netlen = ~0;
 	q->min_adjlen = ~0;
 	return 0;
-
-nomem:
-	cake_destroy(sch);
-	return -ENOMEM;
 }
 
 static int cake_dump(struct Qdisc *sch, struct sk_buff *skb)
-- 
2.33.0

[PATCH 5.4 21/71] inet_diag: use jiffies_delta_to_msecs()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 3828a93f5cfdf5d8a4ff9dead741e9a2871ff57b ]

Use jiffies_delta_to_msecs() to avoid reporting 'infinite'
timeouts and to cleanup code.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_diag.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 4f71aca156662..6f8118b29ba51 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -240,17 +240,17 @@ int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk,
 		r->idiag_timer = 1;
 		r->idiag_retrans = icsk->icsk_retransmits;
 		r->idiag_expires =
-			jiffies_to_msecs(icsk->icsk_timeout - jiffies);
+			jiffies_delta_to_msecs(icsk->icsk_timeout - jiffies);
 	} else if (icsk->icsk_pending == ICSK_TIME_PROBE0) {
 		r->idiag_timer = 4;
 		r->idiag_retrans = icsk->icsk_probes_out;
 		r->idiag_expires =
-			jiffies_to_msecs(icsk->icsk_timeout - jiffies);
+			jiffies_delta_to_msecs(icsk->icsk_timeout - jiffies);
 	} else if (timer_pending(&sk->sk_timer)) {
 		r->idiag_timer = 2;
 		r->idiag_retrans = icsk->icsk_probes_out;
 		r->idiag_expires =
-			jiffies_to_msecs(sk->sk_timer.expires - jiffies);
+			jiffies_delta_to_msecs(sk->sk_timer.expires - jiffies);
 	} else {
 		r->idiag_timer = 0;
 		r->idiag_expires = 0;
@@ -338,16 +338,13 @@ static int inet_twsk_diag_fill(struct sock *sk,
 	r = nlmsg_data(nlh);
 	BUG_ON(tw->tw_state != TCP_TIME_WAIT);
 
-	tmo = tw->tw_timer.expires - jiffies;
-	if (tmo < 0)
-		tmo = 0;
-
 	inet_diag_msg_common_fill(r, sk);
 	r->idiag_retrans      = 0;
 
 	r->idiag_state	      = tw->tw_substate;
 	r->idiag_timer	      = 3;
-	r->idiag_expires      = jiffies_to_msecs(tmo);
+	tmo = tw->tw_timer.expires - jiffies;
+	r->idiag_expires      = jiffies_delta_to_msecs(tmo);
 	r->idiag_rqueue	      = 0;
 	r->idiag_wqueue	      = 0;
 	r->idiag_uid	      = 0;
@@ -381,7 +378,7 @@ static int inet_req_diag_fill(struct sock *sk, struct sk_buff *skb,
 		     offsetof(struct sock, sk_cookie));
 
 	tmo = inet_reqsk(sk)->rsk_timer.expires - jiffies;
-	r->idiag_expires = (tmo >= 0) ? jiffies_to_msecs(tmo) : 0;
+	r->idiag_expires = jiffies_delta_to_msecs(tmo);
 	r->idiag_rqueue	= 0;
 	r->idiag_wqueue	= 0;
 	r->idiag_uid	= 0;
-- 
2.33.0

[PATCH 5.4 22/71] inet_diag: fix kernel-infoleak for UDP sockets

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 71ddeac8cd1d217744a0e060ff520e147c9328d1 ]

KMSAN reported a kernel-infoleak [1], that can exploited
by unpriv users.

After analysis it turned out UDP was not initializing
r->idiag_expires. Other users of inet_sk_diag_fill()
might make the same mistake in the future, so fix this
in inet_sk_diag_fill().

[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:156 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670
 instrument_copy_to_user include/linux/instrumented.h:121 [inline]
 copyout lib/iov_iter.c:156 [inline]
 _copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670
 copy_to_iter include/linux/uio.h:155 [inline]
 simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
 __skb_datagram_iter+0x2cb/0x1280 net/core/datagram.c:425
 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
 skb_copy_datagram_msg include/linux/skbuff.h:3657 [inline]
 netlink_recvmsg+0x660/0x1c60 net/netlink/af_netlink.c:1974
 sock_recvmsg_nosec net/socket.c:944 [inline]
 sock_recvmsg net/socket.c:962 [inline]
 sock_read_iter+0x5a9/0x630 net/socket.c:1035
 call_read_iter include/linux/fs.h:2156 [inline]
 new_sync_read fs/read_write.c:400 [inline]
 vfs_read+0x1631/0x1980 fs/read_write.c:481
 ksys_read+0x28c/0x520 fs/read_write.c:619
 __do_sys_read fs/read_write.c:629 [inline]
 __se_sys_read fs/read_write.c:627 [inline]
 __x64_sys_read+0xdb/0x120 fs/read_write.c:627
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:524 [inline]
 slab_alloc_node mm/slub.c:3251 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1126 [inline]
 netlink_dump+0x3d5/0x16a0 net/netlink/af_netlink.c:2245
 __netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370
 netlink_dump_start include/linux/netlink.h:254 [inline]
 inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1343
 sock_diag_rcv_msg+0x24a/0x620
 netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491
 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:276
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 sock_write_iter+0x594/0x690 net/socket.c:1057
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_write+0x52c/0x1500 fs/read_write.c:851
 vfs_writev fs/read_write.c:924 [inline]
 do_writev+0x63f/0xe30 fs/read_write.c:967
 __do_sys_writev fs/read_write.c:1040 [inline]
 __se_sys_writev fs/read_write.c:1037 [inline]
 __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Bytes 68-71 of 312 are uninitialized
Memory access of size 312 starts at ffff88812ab54000
Data copied to user address 0000000020001440

CPU: 1 PID: 6365 Comm: syz-executor801 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 3c4d05c80567 ("inet_diag: Introduce the inet socket dumping routine")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211209185058.53917-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_diag.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 6f8118b29ba51..f8f79672cc5f3 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -200,6 +200,7 @@ int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk,
 	r->idiag_state = sk->sk_state;
 	r->idiag_timer = 0;
 	r->idiag_retrans = 0;
+	r->idiag_expires = 0;
 
 	if (inet_diag_msg_attrs_fill(sk, skb, r, ext, user_ns, net_admin))
 		goto errout;
@@ -251,9 +252,6 @@ int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk,
 		r->idiag_retrans = icsk->icsk_probes_out;
 		r->idiag_expires =
 			jiffies_delta_to_msecs(sk->sk_timer.expires - jiffies);
-	} else {
-		r->idiag_timer = 0;
-		r->idiag_expires = 0;
 	}
 
 	if ((ext & (1 << (INET_DIAG_INFO - 1))) && handler->idiag_info_size) {
-- 
2.33.0

[PATCH 5.4 23/71] selftests: Fix raw socket bind tests with VRF

[Greg Kroah-Hartman]

From: David Ahern <dsahern@kernel.org>

[ Upstream commit 0f108ae4452025fef529671998f6c7f1c4526790 ]

Commit referenced below added negative socket bind tests for VRF. The
socket binds should fail since the address to bind to is in a VRF yet
the socket is not bound to the VRF or a device within it. Update the
expected return code to check for 1 (bind failure) so the test passes
when the bind fails as expected. Add a 'show_hint' comment to explain
why the bind is expected to fail.

Fixes: 75b2b2b3db4c ("selftests: Add ipv4 address bind tests to fcnal-test")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/fcnal-test.sh | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 475ac62373e92..c8f28e847ee9e 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -1491,8 +1491,9 @@ ipv4_addr_bind_vrf()
 	for a in ${NSA_IP} ${VRF_IP}
 	do
 		log_start
+		show_hint "Socket not bound to VRF, but address is in VRF"
 		run_cmd nettest -s -R -P icmp -l ${a} -b
-		log_test_addr ${a} $? 0 "Raw socket bind to local address"
+		log_test_addr ${a} $? 1 "Raw socket bind to local address"
 
 		log_start
 		run_cmd nettest -s -R -P icmp -l ${a} -d ${NSA_DEV} -b
-- 
2.33.0

[PATCH 5.4 24/71] selftests: Fix IPv6 address bind tests

[Greg Kroah-Hartman]

From: David Ahern <dsahern@kernel.org>

[ Upstream commit 28a2686c185e84b6aa6a4d9c9a972360eb7ca266 ]

IPv6 allows binding a socket to a device then binding to an address
not on the device (__inet6_bind -> ipv6_chk_addr with strict flag
not set). Update the bind tests to reflect legacy behavior.

Fixes: 34d0302ab861 ("selftests: Add ipv6 address bind tests to fcnal-test")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/fcnal-test.sh | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index c8f28e847ee9e..157822331954d 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -2891,11 +2891,14 @@ ipv6_addr_bind_novrf()
 	run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
 	log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind"
 
+	# Sadly, the kernel allows binding a socket to a device and then
+	# binding to an address not on the device. So this test passes
+	# when it really should not
 	a=${NSA_LO_IP6}
 	log_start
-	show_hint "Should fail with 'Cannot assign requested address'"
-	run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
-	log_test_addr ${a} $? 1 "TCP socket bind to out of scope local address"
+	show_hint "Tecnically should fail since address is not on device but kernel allows"
+	run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
+	log_test_addr ${a} $? 0 "TCP socket bind to out of scope local address"
 }
 
 ipv6_addr_bind_vrf()
@@ -2936,10 +2939,15 @@ ipv6_addr_bind_vrf()
 	run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
 	log_test_addr ${a} $? 0 "TCP socket bind to local address with device bind"
 
+	# Sadly, the kernel allows binding a socket to a device and then
+	# binding to an address not on the device. The only restriction
+	# is that the address is valid in the L3 domain. So this test
+	# passes when it really should not
 	a=${VRF_IP6}
 	log_start
-	run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
-	log_test_addr ${a} $? 1 "TCP socket bind to VRF address with device bind"
+	show_hint "Tecnically should fail since address is not on device but kernel allows"
+	run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
+	log_test_addr ${a} $? 0 "TCP socket bind to VRF address with device bind"
 
 	a=${NSA_LO_IP6}
 	log_start
-- 
2.33.0

[PATCH 5.4 25/71] dmaengine: st_fdma: fix MODULE_ALIAS

[Greg Kroah-Hartman]

From: Alyssa Ross <hi@alyssa.is>

[ Upstream commit 822c9f2b833c53fc67e8adf6f63ecc3ea24d502c ]

modprobe can't handle spaces in aliases.

Fixes: 6b4cd727eaf1 ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20211125154441.2626214-1-hi@alyssa.is
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/st_fdma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/st_fdma.c b/drivers/dma/st_fdma.c
index 67087dbe2f9fa..f7393c19a1ba3 100644
--- a/drivers/dma/st_fdma.c
+++ b/drivers/dma/st_fdma.c
@@ -873,4 +873,4 @@ MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("STMicroelectronics FDMA engine driver");
 MODULE_AUTHOR("Ludovic.barre <Ludovic.barre@st.com>");
 MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
-MODULE_ALIAS("platform: " DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
-- 
2.33.0

[PATCH 5.4 26/71] selftest/net/forwarding: declare NETIFS p9 p10

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 71da1aec215290e249d09c44c768df859f3a3bba ]

The recent GRE selftests defined NUM_NETIFS=10. If the users copy
forwarding.config.sample to forwarding.config directly, they will get
error "Command line is not complete" when run the GRE tests, because
create_netif_veth() failed with no interface name defined.

Fix it by extending the NETIFS with p9 and p10.

Fixes: 2800f2485417 ("selftests: forwarding: Test multipath hashing on inner IP pkts for GRE tunnel")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/forwarding/forwarding.config.sample | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/testing/selftests/net/forwarding/forwarding.config.sample b/tools/testing/selftests/net/forwarding/forwarding.config.sample
index e2adb533c8fcb..e71c61ee4cc67 100644
--- a/tools/testing/selftests/net/forwarding/forwarding.config.sample
+++ b/tools/testing/selftests/net/forwarding/forwarding.config.sample
@@ -13,6 +13,8 @@ NETIFS[p5]=veth4
 NETIFS[p6]=veth5
 NETIFS[p7]=veth6
 NETIFS[p8]=veth7
+NETIFS[p9]=veth8
+NETIFS[p10]=veth9
 
 ##############################################################################
 # Defines
-- 
2.33.0

[PATCH 5.4 27/71] mac80211: agg-tx: refactor sending addba

[Greg Kroah-Hartman]

From: Mordechay Goodstein <mordechay.goodstein@intel.com>

[ Upstream commit 31d8bb4e07f80935ee9bf599a9d99de7ca90fc5a ]

We move the actual arming the timer and sending ADDBA to a function
for the use in different places calling the same logic.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200326150855.58a337eb90a1.I75934e6464535fbf43969acc796bc886291e79a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/agg-tx.c | 67 +++++++++++++++++++++++++------------------
 1 file changed, 39 insertions(+), 28 deletions(-)

diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 3d2af1851bdf9..1a5768ae5f515 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -9,7 +9,7 @@
  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
  * Copyright 2007-2010, Intel Corporation
  * Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2019 Intel Corporation
+ * Copyright (C) 2018 - 2020 Intel Corporation
  */
 
 #include <linux/ieee80211.h>
@@ -448,6 +448,43 @@ static void sta_addba_resp_timer_expired(struct timer_list *t)
 	ieee80211_stop_tx_ba_session(&sta->sta, tid);
 }
 
+static void ieee80211_send_addba_with_timeout(struct sta_info *sta,
+					      struct tid_ampdu_tx *tid_tx)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sta->local;
+	u8 tid = tid_tx->tid;
+	u16 buf_size;
+
+	/* activate the timer for the recipient's addBA response */
+	mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
+	ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
+	       sta->sta.addr, tid);
+
+	spin_lock_bh(&sta->lock);
+	sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
+	sta->ampdu_mlme.addba_req_num[tid]++;
+	spin_unlock_bh(&sta->lock);
+
+	if (sta->sta.he_cap.has_he) {
+		buf_size = local->hw.max_tx_aggregation_subframes;
+	} else {
+		/*
+		 * We really should use what the driver told us it will
+		 * transmit as the maximum, but certain APs (e.g. the
+		 * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012)
+		 * will crash when we use a lower number.
+		 */
+		buf_size = IEEE80211_MAX_AMPDU_BUF_HT;
+	}
+
+	/* send AddBA request */
+	ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
+				     tid_tx->dialog_token,
+				     sta->tid_seq[tid] >> 4,
+				     buf_size, tid_tx->timeout);
+}
+
 void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 {
 	struct tid_ampdu_tx *tid_tx;
@@ -462,7 +499,6 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 		.timeout = 0,
 	};
 	int ret;
-	u16 buf_size;
 
 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 
@@ -501,32 +537,7 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 		return;
 	}
 
-	/* activate the timer for the recipient's addBA response */
-	mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
-	ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
-	       sta->sta.addr, tid);
-
-	spin_lock_bh(&sta->lock);
-	sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
-	sta->ampdu_mlme.addba_req_num[tid]++;
-	spin_unlock_bh(&sta->lock);
-
-	if (sta->sta.he_cap.has_he) {
-		buf_size = local->hw.max_tx_aggregation_subframes;
-	} else {
-		/*
-		 * We really should use what the driver told us it will
-		 * transmit as the maximum, but certain APs (e.g. the
-		 * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012)
-		 * will crash when we use a lower number.
-		 */
-		buf_size = IEEE80211_MAX_AMPDU_BUF_HT;
-	}
-
-	/* send AddBA request */
-	ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
-				     tid_tx->dialog_token, params.ssn,
-				     buf_size, tid_tx->timeout);
+	ieee80211_send_addba_with_timeout(sta, tid_tx);
 }
 
 /*
-- 
2.33.0

[PATCH 5.4 28/71] mac80211: agg-tx: dont schedule_and_wake_txq() under sta->lock

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 06c41bda0ea14aa7fba932a9613c4ee239682cf0 ]

When we call ieee80211_agg_start_txq(), that will in turn call
schedule_and_wake_txq(). Called from ieee80211_stop_tx_ba_cb()
this is done under sta->lock, which leads to certain circular
lock dependencies, as reported by Chris Murphy:
https://lore.kernel.org/r/CAJCQCtSXJ5qA4bqSPY=oLRMbv-irihVvP7A2uGutEbXQVkoNaw@mail.gmail.com

In general, ieee80211_agg_start_txq() is usually not called
with sta->lock held, only in this one place. But it's always
called with sta->ampdu_mlme.mtx held, and that's therefore
clearly sufficient.

Change ieee80211_stop_tx_ba_cb() to also call it without the
sta->lock held, by factoring it out of ieee80211_remove_tid_tx()
(which is only called in this one place).

This breaks the locking chain and makes it less likely that
we'll have similar locking chain problems in the future.

Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation")
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211202152554.f519884c8784.I555fef8e67d93fff3d9a304886c4a9f8b322e591@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/agg-tx.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 1a5768ae5f515..d801ceb2ed7fa 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -9,7 +9,7 @@
  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
  * Copyright 2007-2010, Intel Corporation
  * Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2020 Intel Corporation
+ * Copyright (C) 2018 - 2021 Intel Corporation
  */
 
 #include <linux/ieee80211.h>
@@ -213,6 +213,8 @@ ieee80211_agg_start_txq(struct sta_info *sta, int tid, bool enable)
 	struct ieee80211_txq *txq = sta->sta.txq[tid];
 	struct txq_info *txqi;
 
+	lockdep_assert_held(&sta->ampdu_mlme.mtx);
+
 	if (!txq)
 		return;
 
@@ -290,7 +292,6 @@ static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid)
 	ieee80211_assign_tid_tx(sta, tid, NULL);
 
 	ieee80211_agg_splice_finish(sta->sdata, tid);
-	ieee80211_agg_start_txq(sta, tid, false);
 
 	kfree_rcu(tid_tx, rcu_head);
 }
@@ -871,6 +872,7 @@ void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid,
 {
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
 	bool send_delba = false;
+	bool start_txq = false;
 
 	ht_dbg(sdata, "Stopping Tx BA session for %pM tid %d\n",
 	       sta->sta.addr, tid);
@@ -888,10 +890,14 @@ void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid,
 		send_delba = true;
 
 	ieee80211_remove_tid_tx(sta, tid);
+	start_txq = true;
 
  unlock_sta:
 	spin_unlock_bh(&sta->lock);
 
+	if (start_txq)
+		ieee80211_agg_start_txq(sta, tid, false);
+
 	if (send_delba)
 		ieee80211_send_delba(sdata, sta->sta.addr, tid,
 			WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
-- 
2.33.0

[PATCH 5.4 29/71] mac80211: accept aggregation sessions on 6 GHz

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 93382a0d119b3ab95e3ebca51ea15aa87187b493 ]

On 6 GHz, stations don't have ht_supported set, but they can
still do aggregation since they must have HE, allow that.

Link: https://lore.kernel.org/r/20200528213443.776d3c891b64.Ifa099d450617b50c691832b3c4aa08959fab520a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/agg-rx.c | 5 +++--
 net/mac80211/agg-tx.c | 3 ++-
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 4d1c335e06e57..7f245e9f114c2 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -9,7 +9,7 @@
  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
  * Copyright 2007-2010, Intel Corporation
  * Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018        Intel Corporation
+ * Copyright (C) 2018-2020 Intel Corporation
  */
 
 /**
@@ -292,7 +292,8 @@ void ___ieee80211_start_rx_ba_session(struct sta_info *sta,
 		goto end;
 	}
 
-	if (!sta->sta.ht_cap.ht_supported) {
+	if (!sta->sta.ht_cap.ht_supported &&
+	    sta->sdata->vif.bss_conf.chandef.chan->band != NL80211_BAND_6GHZ) {
 		ht_dbg(sta->sdata,
 		       "STA %pM erroneously requests BA session on tid %d w/o QoS\n",
 		       sta->sta.addr, tid);
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index d801ceb2ed7fa..8d3b905e551a3 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -583,7 +583,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 		 "Requested to start BA session on reserved tid=%d", tid))
 		return -EINVAL;
 
-	if (!pubsta->ht_cap.ht_supported)
+	if (!pubsta->ht_cap.ht_supported &&
+	    sta->sdata->vif.bss_conf.chandef.chan->band != NL80211_BAND_6GHZ)
 		return -EINVAL;
 
 	if (WARN_ON_ONCE(!local->ops->ampdu_action))
-- 
2.33.0

[PATCH 5.4 30/71] mac80211: fix lookup when adding AddBA extension element

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 511ab0c1dfb260a6b17b8771109e8d63474473a7 ]

We should be doing the HE capabilities lookup based on the full
interface type so if P2P doesn't have HE but client has it doesn't
get confused. Fix that.

Fixes: 2ab45876756f ("mac80211: add support for the ADDBA extension element")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.010fc1d61137.If3a468145f29d670cb00a693bed559d8290ba693@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/agg-rx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 7f245e9f114c2..49ec9bfb6c8e6 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -9,7 +9,7 @@
  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
  * Copyright 2007-2010, Intel Corporation
  * Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2020 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
  */
 
 /**
@@ -191,7 +191,8 @@ static void ieee80211_add_addbaext(struct ieee80211_sub_if_data *sdata,
 	sband = ieee80211_get_sband(sdata);
 	if (!sband)
 		return;
-	he_cap = ieee80211_get_he_iftype_cap(sband, sdata->vif.type);
+	he_cap = ieee80211_get_he_iftype_cap(sband,
+					     ieee80211_vif_type_p2p(&sdata->vif));
 	if (!he_cap)
 		return;
 
-- 
2.33.0

[PATCH 5.4 31/71] net: sched: lock action when translating it to flow_action infra

[Greg Kroah-Hartman]

From: Vlad Buslov <vladbu@mellanox.com>

[ Upstream commit 7a47281439ba00b11fc098f36695522184ce5a82 ]

In order to remove dependency on rtnl lock, take action's tcfa_lock when
constructing its representation as flow_action_entry structure.

Refactor tcf_sample_get_group() to assume that caller holds tcf_lock and
don't take it manually. This callback is only called from flow_action infra
representation translator which now calls it with tcf_lock held, so this
refactoring is necessary to prevent deadlock.

Allocate memory with GFP_ATOMIC flag for ip_tunnel_info copy because
tcf_tunnel_info_copy() is only called from flow_action representation infra
code with tcf_lock spinlock taken.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/tc_act/tc_tunnel_key.h |  2 +-
 net/sched/act_sample.c             |  2 --
 net/sched/cls_api.c                | 17 +++++++++++------
 3 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/include/net/tc_act/tc_tunnel_key.h b/include/net/tc_act/tc_tunnel_key.h
index 0689d9bcdf841..2b3df076e5b62 100644
--- a/include/net/tc_act/tc_tunnel_key.h
+++ b/include/net/tc_act/tc_tunnel_key.h
@@ -69,7 +69,7 @@ tcf_tunnel_info_copy(const struct tc_action *a)
 	if (tun) {
 		size_t tun_size = sizeof(*tun) + tun->options_len;
 		struct ip_tunnel_info *tun_copy = kmemdup(tun, tun_size,
-							  GFP_KERNEL);
+							  GFP_ATOMIC);
 
 		return tun_copy;
 	}
diff --git a/net/sched/act_sample.c b/net/sched/act_sample.c
index 74450b0f69fc5..214f4efdd9920 100644
--- a/net/sched/act_sample.c
+++ b/net/sched/act_sample.c
@@ -265,14 +265,12 @@ tcf_sample_get_group(const struct tc_action *a,
 	struct tcf_sample *s = to_sample(a);
 	struct psample_group *group;
 
-	spin_lock_bh(&s->tcf_lock);
 	group = rcu_dereference_protected(s->psample_group,
 					  lockdep_is_held(&s->tcf_lock));
 	if (group) {
 		psample_group_take(group);
 		*destructor = tcf_psample_group_put;
 	}
-	spin_unlock_bh(&s->tcf_lock);
 
 	return group;
 }
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 7f20fd37e01e0..61aa63cc170b4 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -3436,7 +3436,7 @@ static void tcf_sample_get_group(struct flow_action_entry *entry,
 int tc_setup_flow_action(struct flow_action *flow_action,
 			 const struct tcf_exts *exts, bool rtnl_held)
 {
-	const struct tc_action *act;
+	struct tc_action *act;
 	int i, j, k, err = 0;
 
 	if (!exts)
@@ -3450,6 +3450,7 @@ int tc_setup_flow_action(struct flow_action *flow_action,
 		struct flow_action_entry *entry;
 
 		entry = &flow_action->entries[j];
+		spin_lock_bh(&act->tcfa_lock);
 		if (is_tcf_gact_ok(act)) {
 			entry->id = FLOW_ACTION_ACCEPT;
 		} else if (is_tcf_gact_shot(act)) {
@@ -3490,13 +3491,13 @@ int tc_setup_flow_action(struct flow_action *flow_action,
 				break;
 			default:
 				err = -EOPNOTSUPP;
-				goto err_out;
+				goto err_out_locked;
 			}
 		} else if (is_tcf_tunnel_set(act)) {
 			entry->id = FLOW_ACTION_TUNNEL_ENCAP;
 			err = tcf_tunnel_encap_get_tunnel(entry, act);
 			if (err)
-				goto err_out;
+				goto err_out_locked;
 		} else if (is_tcf_tunnel_release(act)) {
 			entry->id = FLOW_ACTION_TUNNEL_DECAP;
 		} else if (is_tcf_pedit(act)) {
@@ -3510,7 +3511,7 @@ int tc_setup_flow_action(struct flow_action *flow_action,
 					break;
 				default:
 					err = -EOPNOTSUPP;
-					goto err_out;
+					goto err_out_locked;
 				}
 				entry->mangle.htype = tcf_pedit_htype(act, k);
 				entry->mangle.mask = tcf_pedit_mask(act, k);
@@ -3561,15 +3562,16 @@ int tc_setup_flow_action(struct flow_action *flow_action,
 				entry->mpls_mangle.ttl = tcf_mpls_ttl(act);
 				break;
 			default:
-				goto err_out;
+				goto err_out_locked;
 			}
 		} else if (is_tcf_skbedit_ptype(act)) {
 			entry->id = FLOW_ACTION_PTYPE;
 			entry->ptype = tcf_skbedit_ptype(act);
 		} else {
 			err = -EOPNOTSUPP;
-			goto err_out;
+			goto err_out_locked;
 		}
+		spin_unlock_bh(&act->tcfa_lock);
 
 		if (!is_tcf_pedit(act))
 			j++;
@@ -3583,6 +3585,9 @@ int tc_setup_flow_action(struct flow_action *flow_action,
 		tc_cleanup_flow_action(flow_action);
 
 	return err;
+err_out_locked:
+	spin_unlock_bh(&act->tcfa_lock);
+	goto err_out;
 }
 EXPORT_SYMBOL(tc_setup_flow_action);
 
-- 
2.33.0

[PATCH 5.4 32/71] flow_offload: return EOPNOTSUPP for the unsupported mpls action type

[Greg Kroah-Hartman]

From: Baowen Zheng <baowen.zheng@corigine.com>

[ Upstream commit 166b6a46b78bf8b9559a6620c3032f9fe492e082 ]

We need to return EOPNOTSUPP for the unsupported mpls action type when
setup the flow action.

In the original implement, we will return 0 for the unsupported mpls
action type, actually we do not setup it and the following actions
to the flow action entry.

Fixes: 9838b20a7fb2 ("net: sched: take rtnl lock in tc_setup_flow_action()")
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/cls_api.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 61aa63cc170b4..a4c61205462ac 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -3562,6 +3562,7 @@ int tc_setup_flow_action(struct flow_action *flow_action,
 				entry->mpls_mangle.ttl = tcf_mpls_ttl(act);
 				break;
 			default:
+				err = -EOPNOTSUPP;
 				goto err_out_locked;
 			}
 		} else if (is_tcf_skbedit_ptype(act)) {
-- 
2.33.0

[PATCH 5.4 33/71] rds: memory leak in __rds_conn_create()

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit 5f9562ebe710c307adc5f666bf1a2162ee7977c0 ]

__rds_conn_create() did not release conn->c_path when loop_trans != 0 and
trans->t_prefer_loopback != 0 and is_outgoing == 0.

Fixes: aced3ce57cd3 ("RDS tcp loopback connection can hang")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rds/connection.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/rds/connection.c b/net/rds/connection.c
index c85bd6340eaa7..92ff40e7a66cf 100644
--- a/net/rds/connection.c
+++ b/net/rds/connection.c
@@ -253,6 +253,7 @@ static struct rds_connection *__rds_conn_create(struct net *net,
 				 * should end up here, but if it
 				 * does, reset/destroy the connection.
 				 */
+				kfree(conn->c_path);
 				kmem_cache_free(rds_conn_slab, conn);
 				conn = ERR_PTR(-EOPNOTSUPP);
 				goto out;
-- 
2.33.0

[PATCH 5.4 34/71] soc/tegra: fuse: Fix bitwise vs. logical OR warning

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit a7083763619f7485ccdade160deb81737cf2732f ]

A new warning in clang points out two instances where boolean
expressions are being used with a bitwise OR instead of logical OR:

drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
                reg = tegra_fuse_read_spare(i) |
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
                                               ||
drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
                reg = tegra_fuse_read_spare(i) |
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
                                               ||
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning
2 warnings generated.

The motivation for the warning is that logical operations short circuit
while bitwise operations do not.

In this instance, tegra_fuse_read_spare() is not semantically returning
a boolean, it is returning a bit value. Use u32 for its return type so
that it can be used with either bitwise or boolean operators without any
warnings.

Fixes: 25cd5a391478 ("ARM: tegra: Add speedo-based process identification")
Link: https://github.com/ClangBuiltLinux/linux/issues/1488
Suggested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/tegra/fuse/fuse-tegra.c | 2 +-
 drivers/soc/tegra/fuse/fuse.h       | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index 3eb44e65b3261..1a54bac512b69 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -172,7 +172,7 @@ static struct platform_driver tegra_fuse_driver = {
 };
 builtin_platform_driver(tegra_fuse_driver);
 
-bool __init tegra_fuse_read_spare(unsigned int spare)
+u32 __init tegra_fuse_read_spare(unsigned int spare)
 {
 	unsigned int offset = fuse->soc->info->spare + spare * 4;
 
diff --git a/drivers/soc/tegra/fuse/fuse.h b/drivers/soc/tegra/fuse/fuse.h
index 7230cb3305033..6996cfc7cbca3 100644
--- a/drivers/soc/tegra/fuse/fuse.h
+++ b/drivers/soc/tegra/fuse/fuse.h
@@ -53,7 +53,7 @@ struct tegra_fuse {
 void tegra_init_revision(void);
 void tegra_init_apbmisc(void);
 
-bool __init tegra_fuse_read_spare(unsigned int spare);
+u32 __init tegra_fuse_read_spare(unsigned int spare);
 u32 __init tegra_fuse_read_early(unsigned int offset);
 
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
-- 
2.33.0

[PATCH 5.4 35/71] igb: Fix removal of unicast MAC filters of VFs

[Greg Kroah-Hartman]

From: Karen Sornek <karen.sornek@intel.com>

[ Upstream commit 584af82154f56e6b2740160fcc84a2966d969e15 ]

Move checking condition of VF MAC filter before clearing
or adding MAC filter to VF to prevent potential blackout caused
by removal of necessary and working VF's MAC filter.

Fixes: 1b8b062a99dc ("igb: add VF trust infrastructure")
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 28 +++++++++++------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index c11244a9b7e69..3df25b231ab5c 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7374,6 +7374,20 @@ static int igb_set_vf_mac_filter(struct igb_adapter *adapter, const int vf,
 	struct vf_mac_filter *entry = NULL;
 	int ret = 0;
 
+	if ((vf_data->flags & IGB_VF_FLAG_PF_SET_MAC) &&
+	    !vf_data->trusted) {
+		dev_warn(&pdev->dev,
+			 "VF %d requested MAC filter but is administratively denied\n",
+			  vf);
+		return -EINVAL;
+	}
+	if (!is_valid_ether_addr(addr)) {
+		dev_warn(&pdev->dev,
+			 "VF %d attempted to set invalid MAC filter\n",
+			  vf);
+		return -EINVAL;
+	}
+
 	switch (info) {
 	case E1000_VF_MAC_FILTER_CLR:
 		/* remove all unicast MAC filters related to the current VF */
@@ -7387,20 +7401,6 @@ static int igb_set_vf_mac_filter(struct igb_adapter *adapter, const int vf,
 		}
 		break;
 	case E1000_VF_MAC_FILTER_ADD:
-		if ((vf_data->flags & IGB_VF_FLAG_PF_SET_MAC) &&
-		    !vf_data->trusted) {
-			dev_warn(&pdev->dev,
-				 "VF %d requested MAC filter but is administratively denied\n",
-				 vf);
-			return -EINVAL;
-		}
-		if (!is_valid_ether_addr(addr)) {
-			dev_warn(&pdev->dev,
-				 "VF %d attempted to set invalid MAC filter\n",
-				 vf);
-			return -EINVAL;
-		}
-
 		/* try to find empty slot in the list */
 		list_for_each(pos, &adapter->vf_macs.l) {
 			entry = list_entry(pos, struct vf_mac_filter, l);
-- 
2.33.0

[PATCH 5.4 36/71] igbvf: fix double free in `igbvf_probe`

[Greg Kroah-Hartman]

From: Letu Ren <fantasquex@gmail.com>

[ Upstream commit b6d335a60dc624c0d279333b22c737faa765b028 ]

In `igbvf_probe`, if register_netdev() fails, the program will go to
label err_hw_init, and then to label err_ioremap. In free_netdev() which
is just below label err_ioremap, there is `list_for_each_entry_safe` and
`netif_napi_del` which aims to delete all entries in `dev->napi_list`.
The program has added an entry `adapter->rx_ring->napi` which is added by
`netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has
been freed below label err_hw_init. So this a UAF.

In terms of how to patch the problem, we can refer to igbvf_remove() and
delete the entry before `adapter->rx_ring`.

The KASAN logs are as follows:

[   35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450
[   35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366
[   35.128360]
[   35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14
[   35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[   35.131749] Call Trace:
[   35.132199]  dump_stack_lvl+0x59/0x7b
[   35.132865]  print_address_description+0x7c/0x3b0
[   35.133707]  ? free_netdev+0x1fd/0x450
[   35.134378]  __kasan_report+0x160/0x1c0
[   35.135063]  ? free_netdev+0x1fd/0x450
[   35.135738]  kasan_report+0x4b/0x70
[   35.136367]  free_netdev+0x1fd/0x450
[   35.137006]  igbvf_probe+0x121d/0x1a10 [igbvf]
[   35.137808]  ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf]
[   35.138751]  local_pci_probe+0x13c/0x1f0
[   35.139461]  pci_device_probe+0x37e/0x6c0
[   35.165526]
[   35.165806] Allocated by task 366:
[   35.166414]  ____kasan_kmalloc+0xc4/0xf0
[   35.167117]  foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf]
[   35.168078]  igbvf_probe+0x9c5/0x1a10 [igbvf]
[   35.168866]  local_pci_probe+0x13c/0x1f0
[   35.169565]  pci_device_probe+0x37e/0x6c0
[   35.179713]
[   35.179993] Freed by task 366:
[   35.180539]  kasan_set_track+0x4c/0x80
[   35.181211]  kasan_set_free_info+0x1f/0x40
[   35.181942]  ____kasan_slab_free+0x103/0x140
[   35.182703]  kfree+0xe3/0x250
[   35.183239]  igbvf_probe+0x1173/0x1a10 [igbvf]
[   35.184040]  local_pci_probe+0x13c/0x1f0

Fixes: d4e0fe01a38a0 (igbvf: add new driver to support 82576 virtual functions)
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igbvf/netdev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index 77cb2ab7dab40..1082e49ea0560 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -2887,6 +2887,7 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return 0;
 
 err_hw_init:
+	netif_napi_del(&adapter->rx_ring->napi);
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
 err_sw_init:
-- 
2.33.0

[PATCH 5.4 37/71] ixgbe: set X550 MDIO speed before talking to PHY

[Greg Kroah-Hartman]

From: Cyril Novikov <cnovikov@lynx.com>

[ Upstream commit bf0a375055bd1afbbf02a0ef45f7655da7b71317 ]

The MDIO bus speed must be initialized before talking to the PHY the first
time in order to avoid talking to it using a speed that the PHY doesn't
support.

This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on
Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network
plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined
with the 10Gb network results in a 24MHz MDIO speed, which is apparently
too fast for the connected PHY. PHY register reads over MDIO bus return
garbage, leading to initialization failure.

Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using
the following setup:

* Use an Atom C3000 family system with at least one X552 LAN on the SoC
* Disable PXE or other BIOS network initialization if possible
  (the interface must not be initialized before Linux boots)
* Connect a live 10Gb Ethernet cable to an X550 port
* Power cycle (not reset, doesn't always work) the system and boot Linux
* Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17

Fixes: e84db7272798 ("ixgbe: Introduce function to control MDIO speed")
Signed-off-by: Cyril Novikov <cnovikov@lynx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 9c42f741ed5ef..74728c0a44a81 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -3405,6 +3405,9 @@ static s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
 	/* flush pending Tx transactions */
 	ixgbe_clear_tx_pending(hw);
 
+	/* set MDIO speed before talking to the PHY in case it's the 1st time */
+	ixgbe_set_mdio_speed(hw);
+
 	/* PHY ops must be identified and initialized prior to reset */
 	status = hw->phy.ops.init(hw);
 	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED ||
-- 
2.33.0

[PATCH 5.4 38/71] netdevsim: Zero-initialize memory for new maps value in function nsim_bpf_map_alloc

[Greg Kroah-Hartman]

From: Haimin Zhang <tcs.kernel@gmail.com>

[ Upstream commit 481221775d53d6215a6e5e9ce1cce6d2b4ab9a46 ]

Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
since it may cause a potential kernel information leak issue, as follows:
1. nsim_bpf_map_alloc calls nsim_map_alloc_elem to allocate elements for
a new map.
2. nsim_map_alloc_elem uses kmalloc to allocate map's value, but doesn't
zero it.
3. A user application can use IOCTL BPF_MAP_LOOKUP_ELEM to get specific
element's information in the map.
4. The kernel function map_lookup_elem will call bpf_map_copy_value to get
the information allocated at step-2, then use copy_to_user to copy to the
user buffer.
This can only leak information for an array map.

Fixes: 395cacb5f1a0 ("netdevsim: bpf: support fake map offload")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com>
Link: https://lore.kernel.org/r/20211215111530.72103-1-tcs.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/netdevsim/bpf.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/netdevsim/bpf.c b/drivers/net/netdevsim/bpf.c
index 2b74425822ab1..e0a4acc6144bf 100644
--- a/drivers/net/netdevsim/bpf.c
+++ b/drivers/net/netdevsim/bpf.c
@@ -510,6 +510,7 @@ nsim_bpf_map_alloc(struct netdevsim *ns, struct bpf_offloaded_map *offmap)
 				goto err_free;
 			key = nmap->entry[i].key;
 			*key = i;
+			memset(nmap->entry[i].value, 0, offmap->map.value_size);
 		}
 	}
 
-- 
2.33.0

[PATCH 5.4 39/71] net/packet: rx_owner_map depends on pg_vec

[Greg Kroah-Hartman]

From: Willem de Bruijn <willemb@google.com>

[ Upstream commit ec6af094ea28f0f2dda1a6a33b14cd57e36a9755 ]

Packet sockets may switch ring versions. Avoid misinterpreting state
between versions, whose fields share a union. rx_owner_map is only
allocated with a packet ring (pg_vec) and both are swapped together.
If pg_vec is NULL, meaning no packet ring was allocated, then neither
was rx_owner_map. And the field may be old state from a tpacket_v3.

Fixes: 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race condition")
Reported-by: Syzbot <syzbot+1ac0994a0a0c55151121@syzkaller.appspotmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211215143937.106178-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/packet/af_packet.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 0ffbf3d17911a..6062bd5bf132b 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -4453,9 +4453,10 @@ static int packet_set_ring(struct sock *sk, union tpacket_req_u *req_u,
 	}
 
 out_free_pg_vec:
-	bitmap_free(rx_owner_map);
-	if (pg_vec)
+	if (pg_vec) {
+		bitmap_free(rx_owner_map);
 		free_pg_vec(pg_vec, order, req->tp_block_nr);
+	}
 out:
 	return err;
 }
-- 
2.33.0

[PATCH 5.4 40/71] net: Fix double 0x prefix print in SKB dump

[Greg Kroah-Hartman]

From: Gal Pressman <gal@nvidia.com>

[ Upstream commit 8a03ef676ade55182f9b05115763aeda6dc08159 ]

When printing netdev features %pNF already takes care of the 0x prefix,
remove the explicit one.

Fixes: 6413139dfc64 ("skbuff: increase verbosity when dumping skb data")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 7dba091bc8617..ac083685214e0 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -768,7 +768,7 @@ void skb_dump(const char *level, const struct sk_buff *skb, bool full_pkt)
 	       ntohs(skb->protocol), skb->pkt_type, skb->skb_iif);
 
 	if (dev)
-		printk("%sdev name=%s feat=0x%pNF\n",
+		printk("%sdev name=%s feat=%pNF\n",
 		       level, dev->name, &dev->features);
 	if (sk)
 		printk("%ssk family=%hu type=%u proto=%u\n",
-- 
2.33.0

[PATCH 5.4 41/71] net/smc: Prevent smc_release() from long blocking

[Greg Kroah-Hartman]

From: D. Wythe <alibuda@linux.alibaba.com>

[ Upstream commit 5c15b3123f65f8fbb1b445d9a7e8812e0e435df2 ]

In nginx/wrk benchmark, there's a hung problem with high probability
on case likes that: (client will last several minutes to exit)

server: smc_run nginx

client: smc_run wrk -c 10000 -t 1 http://server

Client hangs with the following backtrace:

0 [ffffa7ce8Of3bbf8] __schedule at ffffffff9f9eOd5f
1 [ffffa7ce8Of3bc88] schedule at ffffffff9f9eløe6
2 [ffffa7ce8Of3bcaO] schedule_timeout at ffffffff9f9e3f3c
3 [ffffa7ce8Of3bd2O] wait_for_common at ffffffff9f9el9de
4 [ffffa7ce8Of3bd8O] __flush_work at ffffffff9fOfeOl3
5 [ffffa7ce8øf3bdfO] smc_release at ffffffffcO697d24 [smc]
6 [ffffa7ce8Of3be2O] __sock_release at ffffffff9f8O2e2d
7 [ffffa7ce8Of3be4ø] sock_close at ffffffff9f8ø2ebl
8 [ffffa7ce8øf3be48] __fput at ffffffff9f334f93
9 [ffffa7ce8Of3be78] task_work_run at ffffffff9flOlff5
10 [ffffa7ce8Of3beaO] do_exit at ffffffff9fOe5Ol2
11 [ffffa7ce8Of3bflO] do_group_exit at ffffffff9fOe592a
12 [ffffa7ce8Of3bf38] __x64_sys_exit_group at ffffffff9fOe5994
13 [ffffa7ce8Of3bf4O] do_syscall_64 at ffffffff9f9d4373
14 [ffffa7ce8Of3bfsO] entry_SYSCALL_64_after_hwframe at ffffffff9fa0007c

This issue dues to flush_work(), which is used to wait for
smc_connect_work() to finish in smc_release(). Once lots of
smc_connect_work() was pending or all executing work dangling,
smc_release() has to block until one worker comes to free, which
is equivalent to wait another smc_connnect_work() to finish.

In order to fix this, There are two changes:

1. For those idle smc_connect_work(), cancel it from the workqueue; for
   executing smc_connect_work(), waiting for it to finish. For that
   purpose, replace flush_work() with cancel_work_sync().

2. Since smc_connect() hold a reference for passive closing, if
   smc_connect_work() has been cancelled, release the reference.

Fixes: 24ac3a08e658 ("net/smc: rebuild nonblocking connect")
Reported-by: Tony Lu <tonylu@linux.alibaba.com>
Tested-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/1639571361-101128-1-git-send-email-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/af_smc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index fa3b20e5f4608..06684ac346abd 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -183,7 +183,9 @@ static int smc_release(struct socket *sock)
 	/* cleanup for a dangling non-blocking connect */
 	if (smc->connect_nonblock && sk->sk_state == SMC_INIT)
 		tcp_abort(smc->clcsock->sk, ECONNABORTED);
-	flush_work(&smc->connect_work);
+
+	if (cancel_work_sync(&smc->connect_work))
+		sock_put(&smc->sk); /* sock_hold in smc_connect for passive closing */
 
 	if (sk->sk_state == SMC_LISTEN)
 		/* smc_close_non_accepted() is called and acquires
-- 
2.33.0

[PATCH 5.4 42/71] net: systemport: Add global locking for descriptor lifecycle

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 8b8e6e782456f1ce02a7ae914bbd5b1053f0b034 ]

The descriptor list is a shared resource across all of the transmit queues, and
the locking mechanism used today only protects concurrency across a given
transmit queue between the transmit and reclaiming. This creates an opportunity
for the SYSTEMPORT hardware to work on corrupted descriptors if we have
multiple producers at once which is the case when using multiple transmit
queues.

This was particularly noticeable when using multiple flows/transmit queues and
it showed up in interesting ways in that UDP packets would get a correct UDP
header checksum being calculated over an incorrect packet length. Similarly TCP
packets would get an equally correct checksum computed by the hardware over an
incorrect packet length.

The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges
when the driver produces a new descriptor anytime it writes to the
WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to
re-organize its descriptors and it is possible that concurrent TX queues
eventually break this internal allocation scheme to the point where the
length/status part of the descriptor gets used for an incorrect data buffer.

The fix is to impose a global serialization for all TX queues in the short
section where we are writing to the WRITE_PORT_{HI,LO} registers which solves
the corruption even with multiple concurrent TX queues being used.

Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 5 ++++-
 drivers/net/ethernet/broadcom/bcmsysport.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 470d12e308814..5a2094a281e15 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -1277,11 +1277,11 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
 	struct bcm_sysport_priv *priv = netdev_priv(dev);
 	struct device *kdev = &priv->pdev->dev;
 	struct bcm_sysport_tx_ring *ring;
+	unsigned long flags, desc_flags;
 	struct bcm_sysport_cb *cb;
 	struct netdev_queue *txq;
 	u32 len_status, addr_lo;
 	unsigned int skb_len;
-	unsigned long flags;
 	dma_addr_t mapping;
 	u16 queue;
 	int ret;
@@ -1339,8 +1339,10 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
 	ring->desc_count--;
 
 	/* Ports are latched, so write upper address first */
+	spin_lock_irqsave(&priv->desc_lock, desc_flags);
 	tdma_writel(priv, len_status, TDMA_WRITE_PORT_HI(ring->index));
 	tdma_writel(priv, addr_lo, TDMA_WRITE_PORT_LO(ring->index));
+	spin_unlock_irqrestore(&priv->desc_lock, desc_flags);
 
 	/* Check ring space and update SW control flow */
 	if (ring->desc_count == 0)
@@ -1970,6 +1972,7 @@ static int bcm_sysport_open(struct net_device *dev)
 	}
 
 	/* Initialize both hardware and software ring */
+	spin_lock_init(&priv->desc_lock);
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		ret = bcm_sysport_init_tx_ring(priv, i);
 		if (ret) {
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h
index 6d80735fbc7f4..57336ca3f4277 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.h
+++ b/drivers/net/ethernet/broadcom/bcmsysport.h
@@ -742,6 +742,7 @@ struct bcm_sysport_priv {
 	int			wol_irq;
 
 	/* Transmit rings */
+	spinlock_t		desc_lock;
 	struct bcm_sysport_tx_ring *tx_rings;
 
 	/* Receive queue */
-- 
2.33.0

[PATCH 5.4 43/71] sit: do not call ipip6_dev_free() from sit_init_net()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit e28587cc491ef0f3c51258fdc87fbc386b1d4c59 ]

ipip6_dev_free is sit dev->priv_destructor, already called
by register_netdevice() if something goes wrong.

Alternative would be to make ipip6_dev_free() robust against
multiple invocations, but other drivers do not implement this
strategy.

syzbot reported:

dst_release underflow
WARNING: CPU: 0 PID: 5059 at net/core/dst.c:173 dst_release+0xd8/0xe0 net/core/dst.c:173
Modules linked in:
CPU: 1 PID: 5059 Comm: syz-executor.4 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:dst_release+0xd8/0xe0 net/core/dst.c:173
Code: 4c 89 f2 89 d9 31 c0 5b 41 5e 5d e9 da d5 44 f9 e8 1d 90 5f f9 c6 05 87 48 c6 05 01 48 c7 c7 80 44 99 8b 31 c0 e8 e8 67 29 f9 <0f> 0b eb 85 0f 1f 40 00 53 48 89 fb e8 f7 8f 5f f9 48 83 c3 a8 48
RSP: 0018:ffffc9000aa5faa0 EFLAGS: 00010246
RAX: d6894a925dd15a00 RBX: 00000000ffffffff RCX: 0000000000040000
RDX: ffffc90005e19000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 0000000000000000 R08: ffffffff816a1f42 R09: ffffed1017344f2c
R10: ffffed1017344f2c R11: 0000000000000000 R12: 0000607f462b1358
R13: 1ffffffff1bfd305 R14: ffffe8ffffcb1358 R15: dffffc0000000000
FS:  00007f66c71a2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f88aaed5058 CR3: 0000000023e0f000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 dst_cache_destroy+0x107/0x1e0 net/core/dst_cache.c:160
 ipip6_dev_free net/ipv6/sit.c:1414 [inline]
 sit_init_net+0x229/0x550 net/ipv6/sit.c:1936
 ops_init+0x313/0x430 net/core/net_namespace.c:140
 setup_net+0x35b/0x9d0 net/core/net_namespace.c:326
 copy_net_ns+0x359/0x5c0 net/core/net_namespace.c:470
 create_new_namespaces+0x4ce/0xa00 kernel/nsproxy.c:110
 unshare_nsproxy_namespaces+0x11e/0x180 kernel/nsproxy.c:226
 ksys_unshare+0x57d/0xb50 kernel/fork.c:3075
 __do_sys_unshare kernel/fork.c:3146 [inline]
 __se_sys_unshare kernel/fork.c:3144 [inline]
 __x64_sys_unshare+0x34/0x40 kernel/fork.c:3144
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f66c882ce99
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f66c71a2168 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007f66c893ff60 RCX: 00007f66c882ce99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000048040200
RBP: 00007f66c8886ff1 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff6634832f R14: 00007f66c71a2300 R15: 0000000000022000
 </TASK>

Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211216111741.1387540-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/sit.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 7f9cae4c49e7e..16e75a996b749 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1876,7 +1876,6 @@ static int __net_init sit_init_net(struct net *net)
 	return 0;
 
 err_reg_dev:
-	ipip6_dev_free(sitn->fb_tunnel_dev);
 	free_netdev(sitn->fb_tunnel_dev);
 err_alloc_dev:
 	return err;
-- 
2.33.0

[PATCH 5.4 44/71] USB: gadget: bRequestType is a bitfield, not a enum

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f08adf5add9a071160c68bb2a61d697f39ab0758 ]

Szymon rightly pointed out that the previous check for the endpoint
direction in bRequestType was not looking at only the bit involved, but
rather the whole value.  Normally this is ok, but for some request
types, bits other than bit 8 could be set and the check for the endpoint
length could not stall correctly.

Fix that up by only checking the single bit.

Fixes: 153a2d7e3350 ("USB: gadget: detect too-big endpoint 0 requests")
Cc: Felipe Balbi <balbi@kernel.org>
Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Link: https://lore.kernel.org/r/20211214184621.385828-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/composite.c    | 6 +++---
 drivers/usb/gadget/legacy/dbgp.c  | 6 +++---
 drivers/usb/gadget/legacy/inode.c | 6 +++---
 3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index d2980e30f3417..c5acf5c39fb18 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1649,14 +1649,14 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	u8				endp;
 
 	if (w_length > USB_COMP_EP0_BUFSIZ) {
-		if (ctrl->bRequestType == USB_DIR_OUT) {
-			goto done;
-		} else {
+		if (ctrl->bRequestType & USB_DIR_IN) {
 			/* Cast away the const, we are going to overwrite on purpose. */
 			__le16 *temp = (__le16 *)&ctrl->wLength;
 
 			*temp = cpu_to_le16(USB_COMP_EP0_BUFSIZ);
 			w_length = USB_COMP_EP0_BUFSIZ;
+		} else {
+			goto done;
 		}
 	}
 
diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c
index 355bc7dab9d5f..6bcbad3825802 100644
--- a/drivers/usb/gadget/legacy/dbgp.c
+++ b/drivers/usb/gadget/legacy/dbgp.c
@@ -346,14 +346,14 @@ static int dbgp_setup(struct usb_gadget *gadget,
 	u16 len = 0;
 
 	if (length > DBGP_REQ_LEN) {
-		if (ctrl->bRequestType == USB_DIR_OUT) {
-			return err;
-		} else {
+		if (ctrl->bRequestType & USB_DIR_IN) {
 			/* Cast away the const, we are going to overwrite on purpose. */
 			__le16 *temp = (__le16 *)&ctrl->wLength;
 
 			*temp = cpu_to_le16(DBGP_REQ_LEN);
 			length = DBGP_REQ_LEN;
+		} else {
+			return err;
 		}
 	}
 
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index f0aff79f544c3..5f1e15172403e 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1336,14 +1336,14 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	u16				w_length = le16_to_cpu(ctrl->wLength);
 
 	if (w_length > RBUF_SIZE) {
-		if (ctrl->bRequestType == USB_DIR_OUT) {
-			return value;
-		} else {
+		if (ctrl->bRequestType & USB_DIR_IN) {
 			/* Cast away the const, we are going to overwrite on purpose. */
 			__le16 *temp = (__le16 *)&ctrl->wLength;
 
 			*temp = cpu_to_le16(RBUF_SIZE);
 			w_length = RBUF_SIZE;
+		} else {
+			return value;
 		}
 	}
 
-- 
2.34.1

[PATCH 5.4 45/71] USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)

[Greg Kroah-Hartman]

From: Jimmy Wang <wangjm221@gmail.com>

commit 0ad3bd562bb91853b9f42bda145b5db6255aee90 upstream.

This device doesn't work well with LPM, losing connectivity intermittently.
Disable LPM to resolve the issue.

Reviewed-by: <markpearson@lenovo.com>
Signed-off-by: Jimmy Wang <wangjm221@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211214012652.4898-1-wangjm221@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -435,6 +435,9 @@ static const struct usb_device_id usb_qu
 	{ USB_DEVICE(0x1532, 0x0116), .driver_info =
 			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
 
+	/* Lenovo USB-C to Ethernet Adapter RTL8153-04 */
+	{ USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* Lenovo Powered USB-C Travel Hub (4X90S92381, RTL8153 GigE) */
 	{ USB_DEVICE(0x17ef, 0x721e), .driver_info = USB_QUIRK_NO_LPM },
 

[PATCH 5.4 46/71] PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error

[Greg Kroah-Hartman]

From: Thomas Gleixner <tglx@linutronix.de>

commit 94185adbfad56815c2c8401e16d81bdb74a79201 upstream.

PCI_MSIX_FLAGS_MASKALL is set in the MSI-X control register at MSI-X
interrupt setup time. It's cleared on success, but the error handling path
only clears the PCI_MSIX_FLAGS_ENABLE bit.

That's incorrect as the reset state of the PCI_MSIX_FLAGS_MASKALL bit is
zero. That can be observed via lspci:

        Capabilities: [b0] MSI-X: Enable- Count=67 Masked+

Clear the bit in the error path to restore the reset state.

Fixes: 438553958ba1 ("PCI/MSI: Enable and mask MSI-X early")
Reported-by: Stefan Roese <sr@denx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Stefan Roese <sr@denx.de>
Cc: linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tufevoqx.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/msi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -878,7 +878,7 @@ out_free:
 	free_msi_irqs(dev);
 
 out_disable:
-	pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
+	pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE, 0);
 
 	return ret;
 }

[PATCH 5.4 47/71] PCI/MSI: Mask MSI-X vectors only on success

[Greg Kroah-Hartman]

From: Stefan Roese <sr@denx.de>

commit 83dbf898a2d45289be875deb580e93050ba67529 upstream.

Masking all unused MSI-X entries is done to ensure that a crash kernel
starts from a clean slate, which correponds to the reset state of the
device as defined in the PCI-E specificion 3.0 and later:

 Vector Control for MSI-X Table Entries
 --------------------------------------

 "00: Mask bit:  When this bit is set, the function is prohibited from
                 sending a message using this MSI-X Table entry.
                 ...
                 This bit’s state after reset is 1 (entry is masked)."

A Marvell NVME device fails to deliver MSI interrupts after trying to
enable MSI-X interrupts due to that masking. It seems to take the MSI-X
mask bits into account even when MSI-X is disabled.

While not specification compliant, this can be cured by moving the masking
into the success path, so that the MSI-X table entries stay in device reset
state when the MSI-X setup fails.

[ tglx: Move it into the success path, add comment and amend changelog ]

Fixes: aa8092c1d1f1 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211210161025.3287927-1-sr@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/msi.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -827,9 +827,6 @@ static int msix_capability_init(struct p
 		goto out_disable;
 	}
 
-	/* Ensure that all table entries are masked. */
-	msix_mask_all(base, tsize);
-
 	ret = msix_setup_entries(dev, base, entries, nvec, affd);
 	if (ret)
 		goto out_disable;
@@ -852,6 +849,16 @@ static int msix_capability_init(struct p
 	/* Set MSI-X enabled bits and unmask the function */
 	pci_intx_for_msi(dev, 0);
 	dev->msix_enabled = 1;
+
+	/*
+	 * Ensure that all table entries are masked to prevent
+	 * stale entries from firing in a crash kernel.
+	 *
+	 * Done late to deal with a broken Marvell NVME device
+	 * which takes the MSI-X mask bits into account even
+	 * when MSI-X is disabled, which prevents MSI delivery.
+	 */
+	msix_mask_all(base, tsize);
 	pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0);
 
 	pcibios_free_irq(dev);

[PATCH 5.4 48/71] usb: xhci: Extend support for runtime power management for AMDs Yellow carp.

[Greg Kroah-Hartman]

From: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>

commit f886d4fbb7c97b8f5f447c92d2dab99c841803c0 upstream.

AMD's Yellow Carp platform has few more XHCI controllers,
enable the runtime power management support for the same.

Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211215093216.1839065-1-Nehal-Bakulchandra.shah@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-pci.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -65,6 +65,8 @@
 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4		0x161e
 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5		0x15d6
 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6		0x15d7
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7		0x161c
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8		0x161f
 
 #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI			0x1042
 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI		0x1142
@@ -303,7 +305,9 @@ static void xhci_pci_quirks(struct devic
 	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 ||
 	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 ||
 	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6))
+	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6 ||
+	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7 ||
+	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8))
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)

[PATCH 5.4 49/71] USB: serial: cp210x: fix CP2105 GPIO registration

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 83b67041f3eaf33f98a075249aa7f4c7617c2f85 upstream.

When generalising GPIO support and adding support for CP2102N, the GPIO
registration for some CP2105 devices accidentally broke. Specifically,
when all the pins of a port are in "modem" mode, and thus unavailable
for GPIO use, the GPIO chip would now be registered without having
initialised the number of GPIO lines. This would in turn be rejected by
gpiolib and some errors messages would be printed (but importantly probe
would still succeed).

Fix this by initialising the number of GPIO lines before registering the
GPIO chip.

Note that as for the other device types, and as when all CP2105 pins are
muxed for LED function, the GPIO chip is registered also when no pins
are available for GPIO use.

Reported-by: Maarten Brock <m.brock@vanmierlo.com>
Link: https://lore.kernel.org/r/5eb560c81d2ea1a2b4602a92d9f48a89@vanmierlo.com
Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N")
Cc: stable@vger.kernel.org      # 4.19
Cc: Karoly Pados <pados@pados.hu>
Link: https://lore.kernel.org/r/20211126094348.31698-1-johan@kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1552,6 +1552,8 @@ static int cp2105_gpioconf_init(struct u
 
 	/*  2 banks of GPIO - One for the pins taken from each serial port */
 	if (intf_num == 0) {
+		priv->gc.ngpio = 2;
+
 		if (mode.eci == CP210X_PIN_MODE_MODEM) {
 			/* mark all GPIOs of this interface as reserved */
 			priv->gpio_altfunc = 0xff;
@@ -1562,8 +1564,9 @@ static int cp2105_gpioconf_init(struct u
 		priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
 						CP210X_ECI_GPIO_MODE_MASK) >>
 						CP210X_ECI_GPIO_MODE_OFFSET);
-		priv->gc.ngpio = 2;
 	} else if (intf_num == 1) {
+		priv->gc.ngpio = 3;
+
 		if (mode.sci == CP210X_PIN_MODE_MODEM) {
 			/* mark all GPIOs of this interface as reserved */
 			priv->gpio_altfunc = 0xff;
@@ -1574,7 +1577,6 @@ static int cp2105_gpioconf_init(struct u
 		priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
 						CP210X_SCI_GPIO_MODE_MASK) >>
 						CP210X_SCI_GPIO_MODE_OFFSET);
-		priv->gc.ngpio = 3;
 	} else {
 		return -ENODEV;
 	}

[PATCH 5.4 50/71] USB: serial: option: add Telit FN990 compositions

[Greg Kroah-Hartman]

From: Daniele Palmas <dnlplm@gmail.com>

commit 2b503c8598d1b232e7fc7526bce9326d92331541 upstream.

Add the following Telit FN990 compositions:

0x1070: tty, adb, rmnet, tty, tty, tty, tty
0x1071: tty, adb, mbim, tty, tty, tty, tty
0x1072: rndis, tty, adb, tty, tty, tty, tty
0x1073: tty, adb, ecm, tty, tty, tty, tty

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20211210100714.22587-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1219,6 +1219,14 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff),	/* Telit LN920 (ECM) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1070, 0xff),	/* Telit FN990 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1071, 0xff),	/* Telit FN990 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1072, 0xff),	/* Telit FN990 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff),	/* Telit FN990 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

[PATCH 5.4 51/71] timekeeping: Really make sure wall_to_monotonic isnt positive

[Greg Kroah-Hartman]

From: Yu Liao <liaoyu15@huawei.com>

commit 4e8c11b6b3f0b6a283e898344f154641eda94266 upstream.

Even after commit e1d7ba873555 ("time: Always make sure wall_to_monotonic
isn't positive") it is still possible to make wall_to_monotonic positive
by running the following code:

    int main(void)
    {
        struct timespec time;

        clock_gettime(CLOCK_MONOTONIC, &time);
        time.tv_nsec = 0;
        clock_settime(CLOCK_REALTIME, &time);
        return 0;
    }

The reason is that the second parameter of timespec64_compare(), ts_delta,
may be unnormalized because the delta is calculated with an open coded
substraction which causes the comparison of tv_sec to yield the wrong
result:

  wall_to_monotonic = { .tv_sec = -10, .tv_nsec =  900000000 }
  ts_delta 	    = { .tv_sec =  -9, .tv_nsec = -900000000 }

That makes timespec64_compare() claim that wall_to_monotonic < ts_delta,
but actually the result should be wall_to_monotonic > ts_delta.

After normalization, the result of timespec64_compare() is correct because
the tv_sec comparison is not longer misleading:

  wall_to_monotonic = { .tv_sec = -10, .tv_nsec =  900000000 }
  ts_delta 	    = { .tv_sec = -10, .tv_nsec =  100000000 }

Use timespec64_sub() to ensure that ts_delta is normalized, which fixes the
issue.

Fixes: e1d7ba873555 ("time: Always make sure wall_to_monotonic isn't positive")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211213135727.1656662-1-liaoyu15@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/time/timekeeping.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1236,8 +1236,7 @@ int do_settimeofday64(const struct times
 	timekeeping_forward_now(tk);
 
 	xt = tk_xtime(tk);
-	ts_delta.tv_sec = ts->tv_sec - xt.tv_sec;
-	ts_delta.tv_nsec = ts->tv_nsec - xt.tv_nsec;
+	ts_delta = timespec64_sub(*ts, xt);
 
 	if (timespec64_compare(&tk->wall_to_monotonic, &ts_delta) > 0) {
 		ret = -EINVAL;

[PATCH 5.4 52/71] libata: if T_LENGTH is zero, dma direction should be DMA_NONE

[Greg Kroah-Hartman]

From: George Kennedy <george.kennedy@oracle.com>

commit 5da5231bb47864e5dd6c6731151e98b6ee498827 upstream.

Avoid data corruption by rejecting pass-through commands where
T_LENGTH is zero (No data is transferred) and the dma direction
is not DMA_NONE.

Cc: <stable@vger.kernel.org>
Reported-by: syzkaller<syzkaller@googlegroups.com>
Signed-off-by: George Kennedy<george.kennedy@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ata/libata-scsi.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3164,8 +3164,19 @@ static unsigned int ata_scsi_pass_thru(s
 		goto invalid_fld;
 	}
 
-	if (ata_is_ncq(tf->protocol) && (cdb[2 + cdb_offset] & 0x3) == 0)
-		tf->protocol = ATA_PROT_NCQ_NODATA;
+	if ((cdb[2 + cdb_offset] & 0x3) == 0) {
+		/*
+		 * When T_LENGTH is zero (No data is transferred), dir should
+		 * be DMA_NONE.
+		 */
+		if (scmd->sc_data_direction != DMA_NONE) {
+			fp = 2 + cdb_offset;
+			goto invalid_fld;
+		}
+
+		if (ata_is_ncq(tf->protocol))
+			tf->protocol = ATA_PROT_NCQ_NODATA;
+	}
 
 	/* enable LBA */
 	tf->flags |= ATA_TFLAG_LBA;

[PATCH 5.4 53/71] drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORE

[Greg Kroah-Hartman]

From: Le Ma <le.ma@amd.com>

commit f3a8076eb28cae1553958c629aecec479394bbe2 upstream.

should count on GC IP base address

Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -2906,8 +2906,8 @@ static void gfx_v9_0_init_pg(struct amdg
 			      AMD_PG_SUPPORT_CP |
 			      AMD_PG_SUPPORT_GDS |
 			      AMD_PG_SUPPORT_RLC_SMU_HS)) {
-		WREG32(mmRLC_JUMP_TABLE_RESTORE,
-		       adev->gfx.rlc.cp_table_gpu_addr >> 8);
+		WREG32_SOC15(GC, 0, mmRLC_JUMP_TABLE_RESTORE,
+			     adev->gfx.rlc.cp_table_gpu_addr >> 8);
 		gfx_v9_0_init_gfx_power_gating(adev);
 	}
 }

[PATCH 5.4 54/71] mac80211: validate extended element ID is present

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit 768c0b19b50665e337c96858aa2b7928d6dcf756 upstream.

Before attempting to parse an extended element, verify that
the extended element ID is present.

Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Reported-by: syzbot+59bdff68edce82e393b6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211211201023.f30a1b128c07.I5cacc176da94ba316877c6e10fe3ceec8b4dbd7d@changeid
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/util.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1227,6 +1227,8 @@ _ieee802_11_parse_elems_crc(const u8 *st
 				elems->max_idle_period_ie = (void *)pos;
 			break;
 		case WLAN_EID_EXTENSION:
+			if (!elen)
+				break;
 			if (pos[0] == WLAN_EID_EXT_HE_MU_EDCA &&
 			    elen >= (sizeof(*elems->mu_edca_param_set) + 1)) {
 				elems->mu_edca_param_set = (void *)&pos[1];

[PATCH 5.4 55/71] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

commit 6a953dc4dbd1c7057fb765a24f37a5e953c85fb0 upstream.

A new warning in clang points out when macro expansion might result in a
GNU C statement expression. There is an instance of this in the mwifiex
driver:

drivers/net/wireless/marvell/mwifiex/cmdevt.c:217:34: warning: '}' and
')' tokens terminating statement expression appear in different macro
expansion contexts [-Wcompound-token-split-by-macro]
        host_cmd->seq_num = cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO
                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex/fw.h:519:46: note: expanded from
macro 'HostCmd_SET_SEQ_NO_BSS_INFO'
        (((type) & 0x000f) << 12);                  }
                                                    ^

This does not appear to be a real issue. Removing the braces and
replacing them with parentheses will fix the warning and not change the
meaning of the code.

Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1146
Reported-by: Andy Lavr <andy.lavr@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200901070834.1015754-1-natechancellor@gmail.com
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/marvell/mwifiex/cmdevt.c |    4 ++--
 drivers/net/wireless/marvell/mwifiex/fw.h     |    8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/net/wireless/marvell/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/marvell/mwifiex/cmdevt.c
@@ -322,9 +322,9 @@ static int mwifiex_dnld_sleep_confirm_cm
 
 	adapter->seq_num++;
 	sleep_cfm_buf->seq_num =
-		cpu_to_le16((HostCmd_SET_SEQ_NO_BSS_INFO
+		cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO
 					(adapter->seq_num, priv->bss_num,
-					 priv->bss_type)));
+					 priv->bss_type));
 
 	mwifiex_dbg(adapter, CMD,
 		    "cmd: DNLD_CMD: %#x, act %#x, len %d, seqno %#x\n",
--- a/drivers/net/wireless/marvell/mwifiex/fw.h
+++ b/drivers/net/wireless/marvell/mwifiex/fw.h
@@ -512,10 +512,10 @@ enum mwifiex_channel_flags {
 
 #define RF_ANTENNA_AUTO                 0xFFFF
 
-#define HostCmd_SET_SEQ_NO_BSS_INFO(seq, num, type) {   \
-	(((seq) & 0x00ff) |                             \
-	 (((num) & 0x000f) << 8)) |                     \
-	(((type) & 0x000f) << 12);                  }
+#define HostCmd_SET_SEQ_NO_BSS_INFO(seq, num, type) \
+	((((seq) & 0x00ff) |                        \
+	 (((num) & 0x000f) << 8)) |                 \
+	(((type) & 0x000f) << 12))
 
 #define HostCmd_GET_SEQ_NO(seq)       \
 	((seq) & HostCmd_SEQ_NUM_MASK)

[PATCH 5.4 56/71] Input: touchscreen - avoid bitwise vs logical OR warning

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit a02dcde595f7cbd240ccd64de96034ad91cffc40 upstream.

A new warning in clang points out a few places in this driver where a
bitwise OR is being used with boolean types:

drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
        data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This use of a bitwise OR is intentional, as bitwise operations do not
short circuit, which allows all the calls to touchscreen_get_prop_u32()
to happen so that the last parameter is initialized while coalescing the
results of the calls to make a decision after they are all evaluated.

To make this clearer to the compiler, use the '|=' operator to assign
the result of each touchscreen_get_prop_u32() call to data_present,
which keeps the meaning of the code the same but makes it obvious that
every one of these calls is expected to happen.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/touchscreen/of_touchscreen.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -81,8 +81,8 @@ void touchscreen_parse_properties(struct
 		       touchscreen_get_prop_u32(dev, "touchscreen-size-x",
 						input_abs_get_max(input,
 								  axis) + 1,
-						&maximum) |
-		       touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
+						&maximum);
+	data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
 						input_abs_get_fuzz(input, axis),
 						&fuzz);
 	if (data_present)
@@ -95,8 +95,8 @@ void touchscreen_parse_properties(struct
 		       touchscreen_get_prop_u32(dev, "touchscreen-size-y",
 						input_abs_get_max(input,
 								  axis) + 1,
-						&maximum) |
-		       touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
+						&maximum);
+	data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
 						input_abs_get_fuzz(input, axis),
 						&fuzz);
 	if (data_present)
@@ -106,11 +106,11 @@ void touchscreen_parse_properties(struct
 	data_present = touchscreen_get_prop_u32(dev,
 						"touchscreen-max-pressure",
 						input_abs_get_max(input, axis),
-						&maximum) |
-		       touchscreen_get_prop_u32(dev,
-						"touchscreen-fuzz-pressure",
-						input_abs_get_fuzz(input, axis),
-						&fuzz);
+						&maximum);
+	data_present |= touchscreen_get_prop_u32(dev,
+						 "touchscreen-fuzz-pressure",
+						 input_abs_get_fuzz(input, axis),
+						 &fuzz);
 	if (data_present)
 		touchscreen_set_params(input, axis, 0, maximum, fuzz);
 

[PATCH 5.4 57/71] ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name

[Greg Kroah-Hartman]

From: Fabio Estevam <festevam@gmail.com>

commit 737e65c7956795b3553781fb7bc82fce1c39503f upstream.

According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may
have the ESAI_TX0 functionality, not ESAI_T0.

Also, NXP's i.MX Config Tools 10.0 generates dtsi with the
MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly.

There are no devicetree users in mainline that use the old name,
so just remove the old entry.

Fixes: c201369d4aa5 ("ARM: dts: imx6ull: add imx6ull support")
Reported-by: George Makarov <georgemakarov1@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/imx6ull-pinfunc.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -82,6 +82,6 @@
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
 
 #endif /* __DTS_IMX6ULL_PINFUNC_H */

[PATCH 5.4 58/71] xsk: Do not sleep in poll() when need_wakeup set

[Greg Kroah-Hartman]

From: Magnus Karlsson <magnus.karlsson@intel.com>

commit bd0687c18e635b63233dc87f38058cd728802ab4 upstream.

Do not sleep in poll() when the need_wakeup flag is set. When this
flag is set, the application needs to explicitly wake up the driver
with a syscall (poll, recvmsg, sendmsg, etc.) to guarantee that Rx
and/or Tx processing will be processed promptly. But the current code
in poll(), sleeps first then wakes up the driver. This means that no
driver processing will occur (baring any interrupts) until the timeout
has expired.

Fix this by checking the need_wakeup flag first and if set, wake the
driver and return to the application. Only if need_wakeup is not set
should the process sleep if there is a timeout set in the poll() call.

Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings")
Reported-by: Keith Wiles <keith.wiles@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20211214102607.7677-1-magnus.karlsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/xdp/xsk.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -434,8 +434,6 @@ static __poll_t xsk_poll(struct file *fi
 	struct xdp_sock *xs = xdp_sk(sk);
 	struct xdp_umem *umem;
 
-	sock_poll_wait(file, sock, wait);
-
 	if (unlikely(!xsk_is_bound(xs)))
 		return mask;
 
@@ -447,6 +445,8 @@ static __poll_t xsk_poll(struct file *fi
 		else
 			/* Poll needs to drive Tx also in copy mode */
 			__xsk_sendmsg(sk);
+	} else {
+		sock_poll_wait(file, sock, wait);
 	}
 
 	if (xs->rx && !xskq_empty_desc(xs->rx))

[PATCH 5.4 59/71] media: mxl111sf: change mutex_init() location

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit 44870a9e7a3c24acbb3f888b2a7cc22c9bdf7e7f upstream.

Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized
mutex. The problem was in wrong mutex_init() location.

Previous mutex_init(&state->msg_lock) call was in ->init() function, but
dvb_usbv2_init() has this order of calls:

	dvb_usbv2_init()
	  dvb_usbv2_adapter_init()
	    dvb_usbv2_adapter_frontend_init()
	      props->frontend_attach()

	  props->init()

Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach()
internally we need to initialize state->msg_lock before
frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_*
devices, which will simply initiaize mutex.

Reported-and-tested-by: syzbot+5ca0bf339f13c4243001@syzkaller.appspotmail.com

Fixes: 8572211842af ("[media] mxl111sf: convert to new DVB USB")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/dvb-usb-v2/mxl111sf.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
@@ -931,8 +931,6 @@ static int mxl111sf_init(struct dvb_usb_
 		  .len = sizeof(eeprom), .buf = eeprom },
 	};
 
-	mutex_init(&state->msg_lock);
-
 	ret = get_chip_info(state);
 	if (mxl_fail(ret))
 		pr_err("failed to get chip info during probe");
@@ -1074,6 +1072,14 @@ static int mxl111sf_get_stream_config_dv
 	return 0;
 }
 
+static int mxl111sf_probe(struct dvb_usb_device *dev)
+{
+	struct mxl111sf_state *state = d_to_priv(dev);
+
+	mutex_init(&state->msg_lock);
+	return 0;
+}
+
 static struct dvb_usb_device_properties mxl111sf_props_dvbt = {
 	.driver_name = KBUILD_MODNAME,
 	.owner = THIS_MODULE,
@@ -1083,6 +1089,7 @@ static struct dvb_usb_device_properties
 	.generic_bulk_ctrl_endpoint = 0x02,
 	.generic_bulk_ctrl_endpoint_response = 0x81,
 
+	.probe             = mxl111sf_probe,
 	.i2c_algo          = &mxl111sf_i2c_algo,
 	.frontend_attach   = mxl111sf_frontend_attach_dvbt,
 	.tuner_attach      = mxl111sf_attach_tuner,
@@ -1124,6 +1131,7 @@ static struct dvb_usb_device_properties
 	.generic_bulk_ctrl_endpoint = 0x02,
 	.generic_bulk_ctrl_endpoint_response = 0x81,
 
+	.probe             = mxl111sf_probe,
 	.i2c_algo          = &mxl111sf_i2c_algo,
 	.frontend_attach   = mxl111sf_frontend_attach_atsc,
 	.tuner_attach      = mxl111sf_attach_tuner,
@@ -1165,6 +1173,7 @@ static struct dvb_usb_device_properties
 	.generic_bulk_ctrl_endpoint = 0x02,
 	.generic_bulk_ctrl_endpoint_response = 0x81,
 
+	.probe             = mxl111sf_probe,
 	.i2c_algo          = &mxl111sf_i2c_algo,
 	.frontend_attach   = mxl111sf_frontend_attach_mh,
 	.tuner_attach      = mxl111sf_attach_tuner,
@@ -1233,6 +1242,7 @@ static struct dvb_usb_device_properties
 	.generic_bulk_ctrl_endpoint = 0x02,
 	.generic_bulk_ctrl_endpoint_response = 0x81,
 
+	.probe             = mxl111sf_probe,
 	.i2c_algo          = &mxl111sf_i2c_algo,
 	.frontend_attach   = mxl111sf_frontend_attach_atsc_mh,
 	.tuner_attach      = mxl111sf_attach_tuner,
@@ -1311,6 +1321,7 @@ static struct dvb_usb_device_properties
 	.generic_bulk_ctrl_endpoint = 0x02,
 	.generic_bulk_ctrl_endpoint_response = 0x81,
 
+	.probe             = mxl111sf_probe,
 	.i2c_algo          = &mxl111sf_i2c_algo,
 	.frontend_attach   = mxl111sf_frontend_attach_mercury,
 	.tuner_attach      = mxl111sf_attach_tuner,
@@ -1381,6 +1392,7 @@ static struct dvb_usb_device_properties
 	.generic_bulk_ctrl_endpoint = 0x02,
 	.generic_bulk_ctrl_endpoint_response = 0x81,
 
+	.probe             = mxl111sf_probe,
 	.i2c_algo          = &mxl111sf_i2c_algo,
 	.frontend_attach   = mxl111sf_frontend_attach_mercury_mh,
 	.tuner_attach      = mxl111sf_attach_tuner,

[PATCH 5.4 60/71] fuse: annotate lock in fuse_reverse_inval_entry()

[Greg Kroah-Hartman]

From: Miklos Szeredi <mszeredi@redhat.com>

commit bda9a71980e083699a0360963c0135657b73f47a upstream.

Add missing inode lock annotatation; found by syzbot.

Reported-and-tested-by: syzbot+9f747458f5990eaa8d43@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/fuse/dir.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1032,7 +1032,7 @@ int fuse_reverse_inval_entry(struct supe
 	if (!parent)
 		return -ENOENT;
 
-	inode_lock(parent);
+	inode_lock_nested(parent, I_MUTEX_PARENT);
 	if (!S_ISDIR(parent->i_mode))
 		goto unlock;
 

[PATCH 5.4 61/71] ovl: fix warning in ovl_create_real()

[Greg Kroah-Hartman]

From: Miklos Szeredi <mszeredi@redhat.com>

commit 1f5573cfe7a7056e80a92c7a037a3e69f3a13d1c upstream.

Syzbot triggered the following warning in ovl_workdir_create() ->
ovl_create_real():

	if (!err && WARN_ON(!newdentry->d_inode)) {

The reason is that the cgroup2 filesystem returns from mkdir without
instantiating the new dentry.

Weird filesystems such as this will be rejected by overlayfs at a later
stage during setup, but to prevent such a warning, call ovl_mkdir_real()
directly from ovl_workdir_create() and reject this case early.

Reported-and-tested-by: syzbot+75eab84fd0af9e8bf66b@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/overlayfs/dir.c       |    3 +--
 fs/overlayfs/overlayfs.h |    1 +
 fs/overlayfs/super.c     |   12 ++++++++----
 3 files changed, 10 insertions(+), 6 deletions(-)

--- a/fs/overlayfs/dir.c
+++ b/fs/overlayfs/dir.c
@@ -113,8 +113,7 @@ kill_whiteout:
 	goto out;
 }
 
-static int ovl_mkdir_real(struct inode *dir, struct dentry **newdentry,
-			  umode_t mode)
+int ovl_mkdir_real(struct inode *dir, struct dentry **newdentry, umode_t mode)
 {
 	int err;
 	struct dentry *d, *dentry = *newdentry;
--- a/fs/overlayfs/overlayfs.h
+++ b/fs/overlayfs/overlayfs.h
@@ -409,6 +409,7 @@ struct ovl_cattr {
 
 #define OVL_CATTR(m) (&(struct ovl_cattr) { .mode = (m) })
 
+int ovl_mkdir_real(struct inode *dir, struct dentry **newdentry, umode_t mode);
 struct dentry *ovl_create_real(struct inode *dir, struct dentry *newdentry,
 			       struct ovl_cattr *attr);
 int ovl_cleanup(struct inode *dir, struct dentry *dentry);
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -650,10 +650,14 @@ retry:
 			goto retry;
 		}
 
-		work = ovl_create_real(dir, work, OVL_CATTR(attr.ia_mode));
-		err = PTR_ERR(work);
-		if (IS_ERR(work))
-			goto out_err;
+		err = ovl_mkdir_real(dir, &work, attr.ia_mode);
+		if (err)
+			goto out_dput;
+
+		/* Weird filesystem returning with hashed negative (kernfs)? */
+		err = -EINVAL;
+		if (d_really_is_negative(work))
+			goto out_dput;
 
 		/*
 		 * Try to remove POSIX ACL xattrs from workdir.  We are good if:

[PATCH 5.4 62/71] scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()

[Greg Kroah-Hartman]

From: George Kennedy <george.kennedy@oracle.com>

commit e0a2c28da11e2c2b963fc01d50acbf03045ac732 upstream.

In resp_mode_select() sanity check the block descriptor len to avoid UAF.

BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
Read of size 1 at addr ffff888026670f50 by task scsicmd/15032

CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Call Trace:
 <TASK>
 dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107
 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257
 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443
 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306
 resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
 schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483
 scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537
 scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521
 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640
 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762
 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839
 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63
 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837
 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775
 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941
 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166
 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52
 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50
 entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113

Link: https://lore.kernel.org/r/1637262208-28850-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller <syzkaller@googlegroups.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/scsi_debug.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2296,11 +2296,11 @@ static int resp_mode_select(struct scsi_
 			    __func__, param_len, res);
 	md_len = mselect6 ? (arr[0] + 1) : (get_unaligned_be16(arr + 0) + 2);
 	bd_len = mselect6 ? arr[3] : get_unaligned_be16(arr + 6);
-	if (md_len > 2) {
+	off = bd_len + (mselect6 ? 4 : 8);
+	if (md_len > 2 || off >= res) {
 		mk_sense_invalid_fld(scp, SDEB_IN_DATA, 0, -1);
 		return check_condition_result;
 	}
-	off = bd_len + (mselect6 ? 4 : 8);
 	mpage = arr[off] & 0x3f;
 	ps = !!(arr[off] & 0x80);
 	if (ps) {

[PATCH 5.4 63/71] rcu: Mark accesses to rcu_state.n_force_qs

[Greg Kroah-Hartman]

From: Paul E. McKenney <paulmck@kernel.org>

commit 2431774f04d1050292054c763070021bade7b151 upstream.

This commit marks accesses to the rcu_state.n_force_qs.  These data
races are hard to make happen, but syzkaller was equal to the task.

Reported-by: syzbot+e08a83a1940ec3846cd5@syzkaller.appspotmail.com
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/rcu/tree.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -1602,7 +1602,7 @@ static void rcu_gp_fqs(bool first_time)
 	struct rcu_node *rnp = rcu_get_root();
 
 	WRITE_ONCE(rcu_state.gp_activity, jiffies);
-	rcu_state.n_force_qs++;
+	WRITE_ONCE(rcu_state.n_force_qs, rcu_state.n_force_qs + 1);
 	if (first_time) {
 		/* Collect dyntick-idle snapshots. */
 		force_qs_rnp(dyntick_save_progress_counter);
@@ -2207,7 +2207,7 @@ static void rcu_do_batch(struct rcu_data
 	/* Reset ->qlen_last_fqs_check trigger if enough CBs have drained. */
 	if (count == 0 && rdp->qlen_last_fqs_check != 0) {
 		rdp->qlen_last_fqs_check = 0;
-		rdp->n_force_qs_snap = rcu_state.n_force_qs;
+		rdp->n_force_qs_snap = READ_ONCE(rcu_state.n_force_qs);
 	} else if (count < rdp->qlen_last_fqs_check - qhimark)
 		rdp->qlen_last_fqs_check = count;
 
@@ -2535,10 +2535,10 @@ static void __call_rcu_core(struct rcu_d
 		} else {
 			/* Give the grace period a kick. */
 			rdp->blimit = DEFAULT_MAX_RCU_BLIMIT;
-			if (rcu_state.n_force_qs == rdp->n_force_qs_snap &&
+			if (READ_ONCE(rcu_state.n_force_qs) == rdp->n_force_qs_snap &&
 			    rcu_segcblist_first_pend_cb(&rdp->cblist) != head)
 				rcu_force_quiescent_state();
-			rdp->n_force_qs_snap = rcu_state.n_force_qs;
+			rdp->n_force_qs_snap = READ_ONCE(rcu_state.n_force_qs);
 			rdp->qlen_last_fqs_check = rcu_segcblist_n_cbs(&rdp->cblist);
 		}
 	}
@@ -3029,7 +3029,7 @@ int rcutree_prepare_cpu(unsigned int cpu
 	/* Set up local state, ensuring consistent view of global state. */
 	raw_spin_lock_irqsave_rcu_node(rnp, flags);
 	rdp->qlen_last_fqs_check = 0;
-	rdp->n_force_qs_snap = rcu_state.n_force_qs;
+	rdp->n_force_qs_snap = READ_ONCE(rcu_state.n_force_qs);
 	rdp->blimit = blimit;
 	if (rcu_segcblist_empty(&rdp->cblist) && /* No early-boot CBs? */
 	    !rcu_segcblist_is_offloaded(&rdp->cblist))

[PATCH 5.4 64/71] mac80211: fix regression in SSN handling of addba tx

[Greg Kroah-Hartman]

From: Felix Fietkau <nbd@nbd.name>

commit 73111efacd3c6d9e644acca1d132566932be8af0 upstream.

Some drivers that do their own sequence number allocation (e.g. ath9k) rely
on being able to modify params->ssn on starting tx ampdu sessions.
This was broken by a change that modified it to use sta->tid_seq[tid] instead.

Cc: stable@vger.kernel.org
Fixes: 31d8bb4e07f8 ("mac80211: agg-tx: refactor sending addba")
Reported-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20211124094024.43222-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/agg-tx.c   |    4 ++--
 net/mac80211/sta_info.h |    1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -481,8 +481,7 @@ static void ieee80211_send_addba_with_ti
 
 	/* send AddBA request */
 	ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
-				     tid_tx->dialog_token,
-				     sta->tid_seq[tid] >> 4,
+				     tid_tx->dialog_token, tid_tx->ssn,
 				     buf_size, tid_tx->timeout);
 }
 
@@ -522,6 +521,7 @@ void ieee80211_tx_ba_session_handle_star
 
 	params.ssn = sta->tid_seq[tid] >> 4;
 	ret = drv_ampdu_action(local, sdata, &params);
+	tid_tx->ssn = params.ssn;
 	if (ret) {
 		ht_dbg(sdata,
 		       "BA request denied - HW unavailable for %pM tid %d\n",
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -180,6 +180,7 @@ struct tid_ampdu_tx {
 	u8 stop_initiator;
 	bool tx_stop;
 	u16 buf_size;
+	u16 ssn;
 
 	u16 failed_bar_ssn;
 	bool bar_pending;

[PATCH 5.4 65/71] net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

commit d086a1c65aabb5a4e1edc580ca583e2964c62b44 upstream.

The access of tcf_tunnel_info() produces the following splat, so fix it
by dereferencing the tcf_tunnel_key_params pointer with marker that
internal tcfa_liock is held.

 =============================
 WARNING: suspicious RCU usage
 5.9.0+ #1 Not tainted
 -----------------------------
 include/net/tc_act/tc_tunnel_key.h:59 suspicious rcu_dereference_protected() usage!
 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 1 lock held by tc/34839:
  #0: ffff88828572c2a0 (&p->tcfa_lock){+...}-{2:2}, at: tc_setup_flow_action+0xb3/0x48b5
 stack backtrace:
 CPU: 1 PID: 34839 Comm: tc Not tainted 5.9.0+ #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
 Call Trace:
  dump_stack+0x9a/0xd0
  tc_setup_flow_action+0x14cb/0x48b5
  fl_hw_replace_filter+0x347/0x690 [cls_flower]
  fl_change+0x2bad/0x4875 [cls_flower]
  tc_new_tfilter+0xf6f/0x1ba0
  rtnetlink_rcv_msg+0x5f2/0x870
  netlink_rcv_skb+0x124/0x350
  netlink_unicast+0x433/0x700
  netlink_sendmsg+0x6f1/0xbd0
  sock_sendmsg+0xb0/0xe0
  ____sys_sendmsg+0x4fa/0x6d0
  ___sys_sendmsg+0x12e/0x1b0
  __sys_sendmsg+0xa4/0x120
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f1f8cd4fe57
 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
 RSP: 002b:00007ffdc1e193b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1f8cd4fe57
 RDX: 0000000000000000 RSI: 00007ffdc1e19420 RDI: 0000000000000003
 RBP: 000000005f85aafa R08: 0000000000000001 R09: 00007ffdc1e1936c
 R10: 000000000040522d R11: 0000000000000246 R12: 0000000000000001
 R13: 0000000000000000 R14: 00007ffdc1e1d6f0 R15: 0000000000482420

Fixes: 3ebaf6da0716 ("net: sched: Do not assume RTNL is held in tunnel key action helpers")
Fixes: 7a47281439ba ("net: sched: lock action when translating it to flow_action infra")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/tc_act/tc_tunnel_key.h |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/include/net/tc_act/tc_tunnel_key.h
+++ b/include/net/tc_act/tc_tunnel_key.h
@@ -52,7 +52,10 @@ static inline struct ip_tunnel_info *tcf
 {
 #ifdef CONFIG_NET_CLS_ACT
 	struct tcf_tunnel_key *t = to_tunnel_key(a);
-	struct tcf_tunnel_key_params *params = rtnl_dereference(t->params);
+	struct tcf_tunnel_key_params *params;
+
+	params = rcu_dereference_protected(t->params,
+					   lockdep_is_held(&a->tcfa_lock));
 
 	return &params->tcft_enc_metadata->u.tun_info;
 #else

[PATCH 5.4 66/71] Revert "xsk: Do not sleep in poll() when need_wakeup set"

[Greg Kroah-Hartman]

From: Magnus Karlsson <magnus.karlsson@intel.com>

commit 0706a78f31c4217ca144f630063ec9561a21548d upstream.

This reverts commit bd0687c18e635b63233dc87f38058cd728802ab4.

This patch causes a Tx only workload to go to sleep even when it does
not have to, leading to misserable performance in skb mode. It fixed
one rare problem but created a much worse one, so this need to be
reverted while I try to craft a proper solution to the original
problem.

Fixes: bd0687c18e63 ("xsk: Do not sleep in poll() when need_wakeup set")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211217145646.26449-1-magnus.karlsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/xdp/xsk.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -434,6 +434,8 @@ static __poll_t xsk_poll(struct file *fi
 	struct xdp_sock *xs = xdp_sk(sk);
 	struct xdp_umem *umem;
 
+	sock_poll_wait(file, sock, wait);
+
 	if (unlikely(!xsk_is_bound(xs)))
 		return mask;
 
@@ -445,8 +447,6 @@ static __poll_t xsk_poll(struct file *fi
 		else
 			/* Poll needs to drive Tx also in copy mode */
 			__xsk_sendmsg(sk);
-	} else {
-		sock_poll_wait(file, sock, wait);
 	}
 
 	if (xs->rx && !xskq_empty_desc(xs->rx))

[PATCH 5.4 67/71] xen/blkfront: harden blkfront against event channel storms

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit 0fd08a34e8e3b67ec9bd8287ac0facf8374b844a upstream.

The Xen blkfront driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using lateeoi event
channels.

This is part of XSA-391

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/xen-blkfront.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1565,9 +1565,12 @@ static irqreturn_t blkif_interrupt(int i
 	unsigned long flags;
 	struct blkfront_ring_info *rinfo = (struct blkfront_ring_info *)dev_id;
 	struct blkfront_info *info = rinfo->dev_info;
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
 
-	if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
+	if (unlikely(info->connected != BLKIF_STATE_CONNECTED)) {
+		xen_irq_lateeoi(irq, XEN_EOI_FLAG_SPURIOUS);
 		return IRQ_HANDLED;
+	}
 
 	spin_lock_irqsave(&rinfo->ring_lock, flags);
  again:
@@ -1583,6 +1586,8 @@ static irqreturn_t blkif_interrupt(int i
 		unsigned long id;
 		unsigned int op;
 
+		eoiflag = 0;
+
 		RING_COPY_RESPONSE(&rinfo->ring, i, &bret);
 		id = bret.id;
 
@@ -1698,6 +1703,8 @@ static irqreturn_t blkif_interrupt(int i
 
 	spin_unlock_irqrestore(&rinfo->ring_lock, flags);
 
+	xen_irq_lateeoi(irq, eoiflag);
+
 	return IRQ_HANDLED;
 
  err:
@@ -1705,6 +1712,8 @@ static irqreturn_t blkif_interrupt(int i
 
 	spin_unlock_irqrestore(&rinfo->ring_lock, flags);
 
+	/* No EOI in order to avoid further interrupts. */
+
 	pr_alert("%s disabled for further use\n", info->gd->disk_name);
 	return IRQ_HANDLED;
 }
@@ -1744,8 +1753,8 @@ static int setup_blkring(struct xenbus_d
 	if (err)
 		goto fail;
 
-	err = bind_evtchn_to_irqhandler(rinfo->evtchn, blkif_interrupt, 0,
-					"blkif", rinfo);
+	err = bind_evtchn_to_irqhandler_lateeoi(rinfo->evtchn, blkif_interrupt,
+						0, "blkif", rinfo);
 	if (err <= 0) {
 		xenbus_dev_fatal(dev, err,
 				 "bind_evtchn_to_irqhandler failed");

[PATCH 5.4 68/71] xen/netfront: harden netfront against event channel storms

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit b27d47950e481f292c0a5ad57357edb9d95d03ba upstream.

The Xen netfront driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using lateeoi event
channels.

For being able to detect the case of no rx responses being added while
the carrier is down a new lock is needed in order to update and test
rsp_cons and the number of seen unconsumed responses atomically.

This is part of XSA-391

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netfront.c |  125 +++++++++++++++++++++++++++++++++------------
 1 file changed, 94 insertions(+), 31 deletions(-)

--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -142,6 +142,9 @@ struct netfront_queue {
 	struct sk_buff *rx_skbs[NET_RX_RING_SIZE];
 	grant_ref_t gref_rx_head;
 	grant_ref_t grant_rx_ref[NET_RX_RING_SIZE];
+
+	unsigned int rx_rsp_unconsumed;
+	spinlock_t rx_cons_lock;
 };
 
 struct netfront_info {
@@ -364,12 +367,13 @@ static int xennet_open(struct net_device
 	return 0;
 }
 
-static void xennet_tx_buf_gc(struct netfront_queue *queue)
+static bool xennet_tx_buf_gc(struct netfront_queue *queue)
 {
 	RING_IDX cons, prod;
 	unsigned short id;
 	struct sk_buff *skb;
 	bool more_to_do;
+	bool work_done = false;
 	const struct device *dev = &queue->info->netdev->dev;
 
 	BUG_ON(!netif_carrier_ok(queue->info->netdev));
@@ -386,6 +390,8 @@ static void xennet_tx_buf_gc(struct netf
 		for (cons = queue->tx.rsp_cons; cons != prod; cons++) {
 			struct xen_netif_tx_response txrsp;
 
+			work_done = true;
+
 			RING_COPY_RESPONSE(&queue->tx, cons, &txrsp);
 			if (txrsp.status == XEN_NETIF_RSP_NULL)
 				continue;
@@ -429,11 +435,13 @@ static void xennet_tx_buf_gc(struct netf
 
 	xennet_maybe_wake_tx(queue);
 
-	return;
+	return work_done;
 
  err:
 	queue->info->broken = true;
 	dev_alert(dev, "Disabled for further use\n");
+
+	return work_done;
 }
 
 struct xennet_gnttab_make_txreq {
@@ -753,6 +761,16 @@ static int xennet_close(struct net_devic
 	return 0;
 }
 
+static void xennet_set_rx_rsp_cons(struct netfront_queue *queue, RING_IDX val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&queue->rx_cons_lock, flags);
+	queue->rx.rsp_cons = val;
+	queue->rx_rsp_unconsumed = RING_HAS_UNCONSUMED_RESPONSES(&queue->rx);
+	spin_unlock_irqrestore(&queue->rx_cons_lock, flags);
+}
+
 static void xennet_move_rx_slot(struct netfront_queue *queue, struct sk_buff *skb,
 				grant_ref_t ref)
 {
@@ -804,7 +822,7 @@ static int xennet_get_extras(struct netf
 		xennet_move_rx_slot(queue, skb, ref);
 	} while (extra.flags & XEN_NETIF_EXTRA_FLAG_MORE);
 
-	queue->rx.rsp_cons = cons;
+	xennet_set_rx_rsp_cons(queue, cons);
 	return err;
 }
 
@@ -884,7 +902,7 @@ next:
 	}
 
 	if (unlikely(err))
-		queue->rx.rsp_cons = cons + slots;
+		xennet_set_rx_rsp_cons(queue, cons + slots);
 
 	return err;
 }
@@ -938,7 +956,8 @@ static int xennet_fill_frags(struct netf
 			__pskb_pull_tail(skb, pull_to - skb_headlen(skb));
 		}
 		if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) {
-			queue->rx.rsp_cons = ++cons + skb_queue_len(list);
+			xennet_set_rx_rsp_cons(queue,
+					       ++cons + skb_queue_len(list));
 			kfree_skb(nskb);
 			return -ENOENT;
 		}
@@ -951,7 +970,7 @@ static int xennet_fill_frags(struct netf
 		kfree_skb(nskb);
 	}
 
-	queue->rx.rsp_cons = cons;
+	xennet_set_rx_rsp_cons(queue, cons);
 
 	return 0;
 }
@@ -1072,7 +1091,9 @@ err:
 
 			if (unlikely(xennet_set_skb_gso(skb, gso))) {
 				__skb_queue_head(&tmpq, skb);
-				queue->rx.rsp_cons += skb_queue_len(&tmpq);
+				xennet_set_rx_rsp_cons(queue,
+						       queue->rx.rsp_cons +
+						       skb_queue_len(&tmpq));
 				goto err;
 			}
 		}
@@ -1096,7 +1117,8 @@ err:
 
 		__skb_queue_tail(&rxq, skb);
 
-		i = ++queue->rx.rsp_cons;
+		i = queue->rx.rsp_cons + 1;
+		xennet_set_rx_rsp_cons(queue, i);
 		work_done++;
 	}
 
@@ -1258,40 +1280,79 @@ static int xennet_set_features(struct ne
 	return 0;
 }
 
-static irqreturn_t xennet_tx_interrupt(int irq, void *dev_id)
+static bool xennet_handle_tx(struct netfront_queue *queue, unsigned int *eoi)
 {
-	struct netfront_queue *queue = dev_id;
 	unsigned long flags;
 
-	if (queue->info->broken)
-		return IRQ_HANDLED;
+	if (unlikely(queue->info->broken))
+		return false;
 
 	spin_lock_irqsave(&queue->tx_lock, flags);
-	xennet_tx_buf_gc(queue);
+	if (xennet_tx_buf_gc(queue))
+		*eoi = 0;
 	spin_unlock_irqrestore(&queue->tx_lock, flags);
 
+	return true;
+}
+
+static irqreturn_t xennet_tx_interrupt(int irq, void *dev_id)
+{
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+	if (likely(xennet_handle_tx(dev_id, &eoiflag)))
+		xen_irq_lateeoi(irq, eoiflag);
+
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t xennet_rx_interrupt(int irq, void *dev_id)
+static bool xennet_handle_rx(struct netfront_queue *queue, unsigned int *eoi)
 {
-	struct netfront_queue *queue = dev_id;
-	struct net_device *dev = queue->info->netdev;
+	unsigned int work_queued;
+	unsigned long flags;
+
+	if (unlikely(queue->info->broken))
+		return false;
 
-	if (queue->info->broken)
-		return IRQ_HANDLED;
+	spin_lock_irqsave(&queue->rx_cons_lock, flags);
+	work_queued = RING_HAS_UNCONSUMED_RESPONSES(&queue->rx);
+	if (work_queued > queue->rx_rsp_unconsumed) {
+		queue->rx_rsp_unconsumed = work_queued;
+		*eoi = 0;
+	} else if (unlikely(work_queued < queue->rx_rsp_unconsumed)) {
+		const struct device *dev = &queue->info->netdev->dev;
+
+		spin_unlock_irqrestore(&queue->rx_cons_lock, flags);
+		dev_alert(dev, "RX producer index going backwards\n");
+		dev_alert(dev, "Disabled for further use\n");
+		queue->info->broken = true;
+		return false;
+	}
+	spin_unlock_irqrestore(&queue->rx_cons_lock, flags);
 
-	if (likely(netif_carrier_ok(dev) &&
-		   RING_HAS_UNCONSUMED_RESPONSES(&queue->rx)))
+	if (likely(netif_carrier_ok(queue->info->netdev) && work_queued))
 		napi_schedule(&queue->napi);
 
+	return true;
+}
+
+static irqreturn_t xennet_rx_interrupt(int irq, void *dev_id)
+{
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+	if (likely(xennet_handle_rx(dev_id, &eoiflag)))
+		xen_irq_lateeoi(irq, eoiflag);
+
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t xennet_interrupt(int irq, void *dev_id)
 {
-	xennet_tx_interrupt(irq, dev_id);
-	xennet_rx_interrupt(irq, dev_id);
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+	if (xennet_handle_tx(dev_id, &eoiflag) &&
+	    xennet_handle_rx(dev_id, &eoiflag))
+		xen_irq_lateeoi(irq, eoiflag);
+
 	return IRQ_HANDLED;
 }
 
@@ -1525,9 +1586,10 @@ static int setup_netfront_single(struct
 	if (err < 0)
 		goto fail;
 
-	err = bind_evtchn_to_irqhandler(queue->tx_evtchn,
-					xennet_interrupt,
-					0, queue->info->netdev->name, queue);
+	err = bind_evtchn_to_irqhandler_lateeoi(queue->tx_evtchn,
+						xennet_interrupt, 0,
+						queue->info->netdev->name,
+						queue);
 	if (err < 0)
 		goto bind_fail;
 	queue->rx_evtchn = queue->tx_evtchn;
@@ -1555,18 +1617,18 @@ static int setup_netfront_split(struct n
 
 	snprintf(queue->tx_irq_name, sizeof(queue->tx_irq_name),
 		 "%s-tx", queue->name);
-	err = bind_evtchn_to_irqhandler(queue->tx_evtchn,
-					xennet_tx_interrupt,
-					0, queue->tx_irq_name, queue);
+	err = bind_evtchn_to_irqhandler_lateeoi(queue->tx_evtchn,
+						xennet_tx_interrupt, 0,
+						queue->tx_irq_name, queue);
 	if (err < 0)
 		goto bind_tx_fail;
 	queue->tx_irq = err;
 
 	snprintf(queue->rx_irq_name, sizeof(queue->rx_irq_name),
 		 "%s-rx", queue->name);
-	err = bind_evtchn_to_irqhandler(queue->rx_evtchn,
-					xennet_rx_interrupt,
-					0, queue->rx_irq_name, queue);
+	err = bind_evtchn_to_irqhandler_lateeoi(queue->rx_evtchn,
+						xennet_rx_interrupt, 0,
+						queue->rx_irq_name, queue);
 	if (err < 0)
 		goto bind_rx_fail;
 	queue->rx_irq = err;
@@ -1668,6 +1730,7 @@ static int xennet_init_queue(struct netf
 
 	spin_lock_init(&queue->tx_lock);
 	spin_lock_init(&queue->rx_lock);
+	spin_lock_init(&queue->rx_cons_lock);
 
 	timer_setup(&queue->rx_refill_timer, rx_refill_timeout, 0);
 

[PATCH 5.4 69/71] xen/console: harden hvc_xen against event channel storms

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit fe415186b43df0db1f17fa3a46275fd92107fe71 upstream.

The Xen console driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using a lateeoi event
channel.

For the normal domU initial console this requires the introduction of
bind_evtchn_to_irq_lateeoi() as there is no xenbus device available
at the time the event channel is bound to the irq.

As the decision whether an interrupt was spurious or not requires to
test for bytes having been read from the backend, move sending the
event into the if statement, as sending an event without having found
any bytes to be read is making no sense at all.

This is part of XSA-391

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/hvc/hvc_xen.c |   30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -37,6 +37,8 @@ struct xencons_info {
 	struct xenbus_device *xbdev;
 	struct xencons_interface *intf;
 	unsigned int evtchn;
+	XENCONS_RING_IDX out_cons;
+	unsigned int out_cons_same;
 	struct hvc_struct *hvc;
 	int irq;
 	int vtermno;
@@ -138,6 +140,8 @@ static int domU_read_console(uint32_t vt
 	XENCONS_RING_IDX cons, prod;
 	int recv = 0;
 	struct xencons_info *xencons = vtermno_to_xencons(vtermno);
+	unsigned int eoiflag = 0;
+
 	if (xencons == NULL)
 		return -EINVAL;
 	intf = xencons->intf;
@@ -157,7 +161,27 @@ static int domU_read_console(uint32_t vt
 	mb();			/* read ring before consuming */
 	intf->in_cons = cons;
 
-	notify_daemon(xencons);
+	/*
+	 * When to mark interrupt having been spurious:
+	 * - there was no new data to be read, and
+	 * - the backend did not consume some output bytes, and
+	 * - the previous round with no read data didn't see consumed bytes
+	 *   (we might have a race with an interrupt being in flight while
+	 *   updating xencons->out_cons, so account for that by allowing one
+	 *   round without any visible reason)
+	 */
+	if (intf->out_cons != xencons->out_cons) {
+		xencons->out_cons = intf->out_cons;
+		xencons->out_cons_same = 0;
+	}
+	if (recv) {
+		notify_daemon(xencons);
+	} else if (xencons->out_cons_same++ > 1) {
+		eoiflag = XEN_EOI_FLAG_SPURIOUS;
+	}
+
+	xen_irq_lateeoi(xencons->irq, eoiflag);
+
 	return recv;
 }
 
@@ -386,7 +410,7 @@ static int xencons_connect_backend(struc
 	if (ret)
 		return ret;
 	info->evtchn = evtchn;
-	irq = bind_evtchn_to_irq(evtchn);
+	irq = bind_interdomain_evtchn_to_irq_lateeoi(dev->otherend_id, evtchn);
 	if (irq < 0)
 		return irq;
 	info->irq = irq;
@@ -550,7 +574,7 @@ static int __init xen_hvc_init(void)
 			return r;
 
 		info = vtermno_to_xencons(HVC_COOKIE);
-		info->irq = bind_evtchn_to_irq(info->evtchn);
+		info->irq = bind_evtchn_to_irq_lateeoi(info->evtchn);
 	}
 	if (info->irq < 0)
 		info->irq = 0; /* NO_IRQ */

[PATCH 5.4 70/71] xen/netback: fix rx queue stall detection

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit 6032046ec4b70176d247a71836186d47b25d1684 upstream.

Commit 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when
not using GSO") introduced a security problem in netback, as an
interface would only be regarded to be stalled if no slot is available
in the rx queue ring page. In case the SKB at the head of the queued
requests will need more than one rx slot and only one slot is free the
stall detection logic will never trigger, as the test for that is only
looking for at least one slot to be free.

Fix that by testing for the needed number of slots instead of only one
slot being available.

In order to not have to take the rx queue lock that often, store the
number of needed slots in the queue data. As all SKB dequeue operations
happen in the rx queue kernel thread this is safe, as long as the
number of needed slots is accessed via READ/WRITE_ONCE() only and
updates are always done with the rx queue lock held.

Add a small helper for obtaining the number of free slots.

This is part of XSA-392

Fixes: 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when not using GSO")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netback/common.h |    1 
 drivers/net/xen-netback/rx.c     |   65 ++++++++++++++++++++++++---------------
 2 files changed, 42 insertions(+), 24 deletions(-)

--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -203,6 +203,7 @@ struct xenvif_queue { /* Per-queue data
 	unsigned int rx_queue_max;
 	unsigned int rx_queue_len;
 	unsigned long last_rx_time;
+	unsigned int rx_slots_needed;
 	bool stalled;
 
 	struct xenvif_copy_state rx_copy;
--- a/drivers/net/xen-netback/rx.c
+++ b/drivers/net/xen-netback/rx.c
@@ -33,28 +33,36 @@
 #include <xen/xen.h>
 #include <xen/events.h>
 
-static bool xenvif_rx_ring_slots_available(struct xenvif_queue *queue)
+/*
+ * Update the needed ring page slots for the first SKB queued.
+ * Note that any call sequence outside the RX thread calling this function
+ * needs to wake up the RX thread via a call of xenvif_kick_thread()
+ * afterwards in order to avoid a race with putting the thread to sleep.
+ */
+static void xenvif_update_needed_slots(struct xenvif_queue *queue,
+				       const struct sk_buff *skb)
 {
-	RING_IDX prod, cons;
-	struct sk_buff *skb;
-	int needed;
-	unsigned long flags;
+	unsigned int needed = 0;
 
-	spin_lock_irqsave(&queue->rx_queue.lock, flags);
-
-	skb = skb_peek(&queue->rx_queue);
-	if (!skb) {
-		spin_unlock_irqrestore(&queue->rx_queue.lock, flags);
-		return false;
+	if (skb) {
+		needed = DIV_ROUND_UP(skb->len, XEN_PAGE_SIZE);
+		if (skb_is_gso(skb))
+			needed++;
+		if (skb->sw_hash)
+			needed++;
 	}
 
-	needed = DIV_ROUND_UP(skb->len, XEN_PAGE_SIZE);
-	if (skb_is_gso(skb))
-		needed++;
-	if (skb->sw_hash)
-		needed++;
+	WRITE_ONCE(queue->rx_slots_needed, needed);
+}
 
-	spin_unlock_irqrestore(&queue->rx_queue.lock, flags);
+static bool xenvif_rx_ring_slots_available(struct xenvif_queue *queue)
+{
+	RING_IDX prod, cons;
+	unsigned int needed;
+
+	needed = READ_ONCE(queue->rx_slots_needed);
+	if (!needed)
+		return false;
 
 	do {
 		prod = queue->rx.sring->req_prod;
@@ -80,6 +88,9 @@ void xenvif_rx_queue_tail(struct xenvif_
 
 	spin_lock_irqsave(&queue->rx_queue.lock, flags);
 
+	if (skb_queue_empty(&queue->rx_queue))
+		xenvif_update_needed_slots(queue, skb);
+
 	__skb_queue_tail(&queue->rx_queue, skb);
 
 	queue->rx_queue_len += skb->len;
@@ -100,6 +111,8 @@ static struct sk_buff *xenvif_rx_dequeue
 
 	skb = __skb_dequeue(&queue->rx_queue);
 	if (skb) {
+		xenvif_update_needed_slots(queue, skb_peek(&queue->rx_queue));
+
 		queue->rx_queue_len -= skb->len;
 		if (queue->rx_queue_len < queue->rx_queue_max) {
 			struct netdev_queue *txq;
@@ -474,27 +487,31 @@ void xenvif_rx_action(struct xenvif_queu
 	xenvif_rx_copy_flush(queue);
 }
 
-static bool xenvif_rx_queue_stalled(struct xenvif_queue *queue)
+static RING_IDX xenvif_rx_queue_slots(const struct xenvif_queue *queue)
 {
 	RING_IDX prod, cons;
 
 	prod = queue->rx.sring->req_prod;
 	cons = queue->rx.req_cons;
 
+	return prod - cons;
+}
+
+static bool xenvif_rx_queue_stalled(const struct xenvif_queue *queue)
+{
+	unsigned int needed = READ_ONCE(queue->rx_slots_needed);
+
 	return !queue->stalled &&
-		prod - cons < 1 &&
+		xenvif_rx_queue_slots(queue) < needed &&
 		time_after(jiffies,
 			   queue->last_rx_time + queue->vif->stall_timeout);
 }
 
 static bool xenvif_rx_queue_ready(struct xenvif_queue *queue)
 {
-	RING_IDX prod, cons;
-
-	prod = queue->rx.sring->req_prod;
-	cons = queue->rx.req_cons;
+	unsigned int needed = READ_ONCE(queue->rx_slots_needed);
 
-	return queue->stalled && prod - cons >= 1;
+	return queue->stalled && xenvif_rx_queue_slots(queue) >= needed;
 }
 
 bool xenvif_have_rx_work(struct xenvif_queue *queue, bool test_kthread)

[PATCH 5.4 71/71] xen/netback: dont queue unlimited number of packages

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit be81992f9086b230623ae3ebbc85ecee4d00a3d3 upstream.

In case a guest isn't consuming incoming network traffic as fast as it
is coming in, xen-netback is buffering network packages in unlimited
numbers today. This can result in host OOM situations.

Commit f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal
queue and carrier flapping") meant to introduce a mechanism to limit
the amount of buffered data by stopping the Tx queue when reaching the
data limit, but this doesn't work for cases like UDP.

When hitting the limit don't queue further SKBs, but drop them instead.
In order to be able to tell Rx packages have been dropped increment the
rx_dropped statistics counter in this case.

It should be noted that the old solution to continue queueing SKBs had
the additional problem of an overflow of the 32-bit rx_queue_len value
would result in intermittent Tx queue enabling.

This is part of XSA-392

Fixes: f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netback/rx.c |   18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

--- a/drivers/net/xen-netback/rx.c
+++ b/drivers/net/xen-netback/rx.c
@@ -88,16 +88,19 @@ void xenvif_rx_queue_tail(struct xenvif_
 
 	spin_lock_irqsave(&queue->rx_queue.lock, flags);
 
-	if (skb_queue_empty(&queue->rx_queue))
-		xenvif_update_needed_slots(queue, skb);
-
-	__skb_queue_tail(&queue->rx_queue, skb);
-
-	queue->rx_queue_len += skb->len;
-	if (queue->rx_queue_len > queue->rx_queue_max) {
+	if (queue->rx_queue_len >= queue->rx_queue_max) {
 		struct net_device *dev = queue->vif->dev;
 
 		netif_tx_stop_queue(netdev_get_tx_queue(dev, queue->id));
+		kfree_skb(skb);
+		queue->vif->dev->stats.rx_dropped++;
+	} else {
+		if (skb_queue_empty(&queue->rx_queue))
+			xenvif_update_needed_slots(queue, skb);
+
+		__skb_queue_tail(&queue->rx_queue, skb);
+
+		queue->rx_queue_len += skb->len;
 	}
 
 	spin_unlock_irqrestore(&queue->rx_queue.lock, flags);
@@ -147,6 +150,7 @@ static void xenvif_rx_queue_drop_expired
 			break;
 		xenvif_rx_dequeue(queue);
 		kfree_skb(skb);
+		queue->vif->dev->stats.rx_dropped++;
 	}
 }
 

Re: [PATCH 5.4 00/71] 5.4.168-rc1 review

[Jon Hunter]

On Mon, 20 Dec 2021 15:33:49 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.168-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.4:
    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    59 tests:	59 pass, 0 fail

Linux version:	5.4.168-rc1-g13335f539c37
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.4 00/71] 5.4.168-rc1 review

[Florian Fainelli]

On 12/20/2021 6:33 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.168-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.4 00/71] 5.4.168-rc1 review

[Shuah Khan]

On 12/20/21 7:33 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.168-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 00/71] 5.4.168-rc1 review

[Samuel Zou]

On 2021/12/20 22:33, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.168-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.4.168-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.168-rc1
Commit: 33e178a54a32352a55125d511c690b8020b4cbd9
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9014
passed: 9014
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9014
passed: 9014
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 5.4 00/71] 5.4.168-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Dec 20, 2021 at 03:33:49PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20211214): 65 configs -> no new failure
arm (gcc version 11.2.1 20211214): 107 configs -> no new failure
arm64 (gcc version 11.2.1 20211214): 2 configs -> no failure
x86_64 (gcc version 11.2.1 20211214): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/534


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.4 00/71] 5.4.168-rc1 review

[Naresh Kamboju]

On Mon, 20 Dec 2021 at 20:15, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.168-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.4.168-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.4.y
* git commit: 13335f539c375b976ffe3a79116239de6a54645e
* git describe: v5.4.167-72-g13335f539c37
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.167-72-g13335f539c37

## No Test Regressions (compared to v5.4.165-19-g542c7817d093)

## No Test Fixes (compared to v5.4.165-19-g542c7817d093)


## Test result summary
total: 87950, pass: 73810, fail: 632, skip: 12412, xfail: 1096

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 258 total, 254 passed, 4 failed
* arm64: 36 total, 31 passed, 5 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 20 total, 20 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 34 total, 34 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 52 total, 48 passed, 4 failed
* riscv: 24 total, 24 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 36 total, 36 passed, 0 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 00/71] 5.4.168-rc1 review

[Guenter Roeck]

On Mon, Dec 20, 2021 at 03:33:49PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 444 pass: 444 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter