From: Vignesh Raghavendra <vigneshr@ti.com>
To: Dave Gerlach <d-gerlach@ti.com>,
Joe Hershberger <joe.hershberger@ni.com>,
Ramon Fried <rfried.dev@gmail.com>,
Tom Rini <trini@konsulko.com>
Cc: <u-boot@lists.denx.de>, Vignesh Raghavendra <vigneshr@ti.com>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH 0/8] ARM: ti: AM64x: Add Ethernet boot support on AM64x SK
Date: Fri, 24 Dec 2021 12:55:28 +0530 [thread overview]
Message-ID: <20211224072536.270251-1-vigneshr@ti.com> (raw)
This series enables ethernet boot support on AM64x SK.
AM64x SoC has CPSW3g IP that supports 2 ext Eth port. ROM supports
booting from 2nd port. But currently am65-cpsw-nuss only
supports single port (1st port). So the first two patches modify
driver to support more than 1 ext port.
This is done by breaking up am65-cpsw-nuss into UCLASS_MISC for toplevel
NUSS driver and UCLASS_ETH for each of individual ports.
Next 4 patches add mach-k3 and board level changes to enable Ethernet
and TFTP to work at SPL.
Last two patches add dts and config changes need to for Ethernet boot.
Tested on AM64x SK with RGMII 1G bootmode at 1G.
https://controlc.com/90d555ee
Sanity tested TFTP at U-Boot prompt on AM65x and J721e.
Vignesh Raghavendra (8):
mach-k3: common: Instantiate AM65 CPSW NUSS wrapper
net: ti: am65-cpsw: Add support for multi port independent MAC mode
board: ti: am64x: Init DRAM size in R5/A53 SPL
mach-k3: am642_init: Probe AM65 CPSW NUSS for R5/A53 SPL
mach-k3: am64_spl: Alias Ethernet RGMII boot to CPGMAC
configs: am64x_evm: set eth1 as boot interface
ARM: dts: K3-am642-r5-sk: Enable Second CPSW port in R5/A53 SPL
configs: am64x_evm_r5/a53_defconfig: Enable configs required for
Ethboot
arch/arm/dts/k3-am642-r5-sk.dts | 74 +++++++++++++++++++++++
arch/arm/dts/k3-am642-sk-u-boot.dtsi | 40 +++++++++++-
arch/arm/mach-k3/am642_init.c | 7 +++
arch/arm/mach-k3/common.c | 16 +++++
arch/arm/mach-k3/include/mach/am64_spl.h | 1 +
board/ti/am64x/evm.c | 3 +
configs/am64x_evm_a53_defconfig | 4 ++
configs/am64x_evm_r5_defconfig | 12 ++++
drivers/net/ti/Kconfig | 2 +
drivers/net/ti/am65-cpsw-nuss.c | 77 +++++++++++++++---------
include/configs/am64x_evm.h | 5 +-
11 files changed, 212 insertions(+), 29 deletions(-)
--
2.34.1
next reply other threads:[~2021-12-24 7:25 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-24 7:25 Vignesh Raghavendra [this message]
2021-12-24 7:25 ` [PATCH 1/8] mach-k3: common: Instantiate AM65 CPSW NUSS wrapper Vignesh Raghavendra
2022-01-17 18:36 ` Tom Rini
2021-12-24 7:25 ` [PATCH 2/8] net: ti: am65-cpsw: Add support for multi port independent MAC mode Vignesh Raghavendra
2021-12-29 19:31 ` Ramon Fried
2022-01-21 4:18 ` Vignesh Raghavendra
2022-01-17 18:37 ` Tom Rini
2022-01-20 23:13 ` Ramon Fried
2022-01-20 23:19 ` Tom Rini
2022-01-21 4:32 ` Vignesh Raghavendra
2021-12-24 7:25 ` [PATCH 3/8] board: ti: am64x: Init DRAM size in R5/A53 SPL Vignesh Raghavendra
2022-01-17 18:37 ` Tom Rini
2021-12-24 7:25 ` [PATCH 4/8] mach-k3: am642_init: Probe AM65 CPSW NUSS for " Vignesh Raghavendra
2022-01-17 18:37 ` Tom Rini
2021-12-24 7:25 ` [PATCH 5/8] mach-k3: am64_spl: Alias Ethernet RGMII boot to CPGMAC Vignesh Raghavendra
2022-01-17 18:37 ` Tom Rini
2021-12-24 7:25 ` [PATCH 6/8] configs: am64x_evm: set eth1 as boot interface Vignesh Raghavendra
2022-01-17 14:46 ` Tom Rini
2022-01-21 7:11 ` Vignesh Raghavendra
2021-12-24 7:25 ` [PATCH 7/8] ARM: dts: K3-am642-r5-sk: Enable Second CPSW port in R5/A53 SPL Vignesh Raghavendra
2022-01-17 18:37 ` Tom Rini
2021-12-24 7:25 ` [PATCH 8/8] configs: am64x_evm_r5/a53_defconfig: Enable configs required for Ethboot Vignesh Raghavendra
2022-01-17 14:47 ` Tom Rini
2022-01-21 4:29 ` Vignesh Raghavendra
2022-01-21 14:57 ` Tom Rini
2022-01-21 15:18 ` Vignesh Raghavendra
2022-01-21 15:21 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211224072536.270251-1-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=d-gerlach@ti.com \
--cc=grygorii.strashko@ti.com \
--cc=joe.hershberger@ni.com \
--cc=rfried.dev@gmail.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.