All of lore.kernel.org
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@kernel.org>
To: miquel.raynal@bootlin.com, krzysztof.kozlowski@canonical.com
Cc: vigneshr@ti.com, nm@ti.com, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org, Roger Quadros <rogerq@kernel.org>
Subject: [PATCH] mtd: rawnand: omap2: Prevent invalid configuration and build error
Date: Tue, 18 Jan 2022 14:35:25 +0200	[thread overview]
Message-ID: <20220118123525.8020-1-rogerq@kernel.org> (raw)

We need to select MEMORY as well otherwise OMAP_GPMC will not be built.
For simplicity let's select MEMORY and OMAP_GPMC unconditionally as
this driver depends on OMAP_GPMC driver and uses symbols from there.

Fixes: dbcb124acebd ("mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
 drivers/mtd/nand/raw/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 20408b7db540..d986ab4e4c35 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -42,7 +42,8 @@ config MTD_NAND_OMAP2
 	tristate "OMAP2, OMAP3, OMAP4 and Keystone NAND controller"
 	depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
 	depends on HAS_IOMEM
-	select OMAP_GPMC if ARCH_K3
+	select MEMORY
+	select OMAP_GPMC
 	help
 	  Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
 	  and Keystone platforms.
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@kernel.org>
To: miquel.raynal@bootlin.com, krzysztof.kozlowski@canonical.com
Cc: vigneshr@ti.com, nm@ti.com, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org, Roger Quadros <rogerq@kernel.org>
Subject: [PATCH] mtd: rawnand: omap2: Prevent invalid configuration and build error
Date: Tue, 18 Jan 2022 14:35:25 +0200	[thread overview]
Message-ID: <20220118123525.8020-1-rogerq@kernel.org> (raw)

We need to select MEMORY as well otherwise OMAP_GPMC will not be built.
For simplicity let's select MEMORY and OMAP_GPMC unconditionally as
this driver depends on OMAP_GPMC driver and uses symbols from there.

Fixes: dbcb124acebd ("mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
 drivers/mtd/nand/raw/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 20408b7db540..d986ab4e4c35 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -42,7 +42,8 @@ config MTD_NAND_OMAP2
 	tristate "OMAP2, OMAP3, OMAP4 and Keystone NAND controller"
 	depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
 	depends on HAS_IOMEM
-	select OMAP_GPMC if ARCH_K3
+	select MEMORY
+	select OMAP_GPMC
 	help
 	  Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
 	  and Keystone platforms.
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

             reply	other threads:[~2022-01-18 12:35 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-18 12:35 Roger Quadros [this message]
2022-01-18 12:35 ` [PATCH] mtd: rawnand: omap2: Prevent invalid configuration and build error Roger Quadros
2022-01-18 15:28 ` Krzysztof Kozlowski
2022-01-18 15:28   ` Krzysztof Kozlowski
2022-01-23 15:23 ` Miquel Raynal
2022-01-23 15:23   ` Miquel Raynal
2022-01-23 15:33   ` Miquel Raynal
2022-01-23 15:33     ` Miquel Raynal
2022-02-19 15:08 ` Guenter Roeck
2022-02-19 15:08   ` Guenter Roeck
2022-02-19 19:11   ` Roger Quadros
2022-02-19 19:11     ` Roger Quadros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220118123525.8020-1-rogerq@kernel.org \
    --to=rogerq@kernel.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=nm@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.