All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: <qemu-devel@nongnu.org>, Marcel Apfelbaum <marcel@redhat.com>,
	"Michael S . Tsirkin" <mst@redhat.com>,
	Igor Mammedov <imammedo@redhat.com>
Cc: linux-cxl@vger.kernel.org,
	"Ben Widawsky" <ben.widawsky@intel.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	linuxarm@huawei.com,
	"Shameerali Kolothum Thodi"
	<shameerali.kolothum.thodi@huawei.com>,
	"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
	"Saransh Gupta1" <saransh@ibm.com>,
	"Shreyas Shah" <shreyas.shah@elastics.cloud>,
	"Chris Browy" <cbrowy@avery-design.com>,
	"Samarth Saxena" <samarths@cadence.com>,
	"Dan Williams" <dan.j.williams@intel.com>
Subject: [PATCH v4 29/42] hw/cxl/host: Add support for CXL Fixed Memory Windows.
Date: Mon, 24 Jan 2022 17:16:52 +0000	[thread overview]
Message-ID: <20220124171705.10432-30-Jonathan.Cameron@huawei.com> (raw)
In-Reply-To: <20220124171705.10432-1-Jonathan.Cameron@huawei.com>

From: Jonathan Cameron <jonathan.cameron@huawei.com>

The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.

For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.

ExampleS:
-cxl-fixed-memory-window targets=cxl.0,size=128G
-cxl-fixed-memory-window targets=cxl.1,size=128G
-cxl-fixed-memory-window targets=cxl0,targets=cxl.1,size=256G,interleave-granularity=2k

Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
  the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.

When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question.  If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.

A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
   up it's PA memory map.  We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
   but these links cannot be established until command line devices have
   been added.

Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.

[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)

Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
---
 hw/cxl/cxl-host-stubs.c |  22 +++++++
 hw/cxl/cxl-host.c       | 138 ++++++++++++++++++++++++++++++++++++++++
 hw/cxl/meson.build      |  12 ++--
 include/hw/cxl/cxl.h    |  20 ++++++
 qapi/machine.json       |  15 +++++
 qemu-options.hx         |  37 +++++++++++
 softmmu/vl.c            |  11 ++++
 7 files changed, 251 insertions(+), 4 deletions(-)

diff --git a/hw/cxl/cxl-host-stubs.c b/hw/cxl/cxl-host-stubs.c
new file mode 100644
index 0000000000..f942dda41b
--- /dev/null
+++ b/hw/cxl/cxl-host-stubs.c
@@ -0,0 +1,22 @@
+/*
+ * CXL host parameter parsing routine stubs
+ *
+ * Copyright (c) 2022 Huawei
+ */
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/option.h"
+#include "hw/cxl/cxl.h"
+
+QemuOptsList qemu_cxl_fixed_window_opts = {
+    .name = "cxl-fixed-memory-window",
+    .implied_opt_name = "type",
+    .head = QTAILQ_HEAD_INITIALIZER(qemu_cxl_fixed_window_opts.head),
+    .desc = { { 0 } }
+};
+
+void parse_cxl_fixed_memory_window_opts(MachineState *ms) {};
+
+void cxl_fixed_memory_window_link_targets(Error **errp) {};
+
+const MemoryRegionOps cfmws_ops;
diff --git a/hw/cxl/cxl-host.c b/hw/cxl/cxl-host.c
new file mode 100644
index 0000000000..9f303e6d8e
--- /dev/null
+++ b/hw/cxl/cxl-host.c
@@ -0,0 +1,138 @@
+/*
+ * CXL host parameter parsing routines
+ *
+ * Copyright (c) 2022 Huawei
+ * Modeled loosely on the NUMA options handling in hw/core/numa.c
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qemu/bitmap.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include "sysemu/qtest.h"
+#include "hw/boards.h"
+
+#include "qapi/opts-visitor.h"
+#include "qapi/qapi-visit-machine.h"
+#include "qemu/option.h"
+#include "hw/cxl/cxl.h"
+#include "hw/pci/pci_bus.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pci_host.h"
+#include "hw/pci/pcie_port.h"
+
+QemuOptsList qemu_cxl_fixed_window_opts = {
+    .name = "cxl-fixed-memory-window",
+    .implied_opt_name = "type",
+    .head = QTAILQ_HEAD_INITIALIZER(qemu_cxl_fixed_window_opts.head),
+    .desc = { { 0 } }
+};
+
+static void set_cxl_fixed_memory_window_options(MachineState *ms,
+                                                CXLFixedMemoryWindowOptions *object,
+                                                Error **errp)
+{
+    CXLFixedWindow *fw = g_malloc0(sizeof(*fw));
+    strList *target;
+    int i;
+
+    for (target = object->targets; target; target = target->next) {
+        fw->num_targets++;
+    }
+
+    fw->enc_int_ways = cxl_interleave_ways_enc(fw->num_targets, errp);
+    if (*errp) {
+        return;
+    }
+
+    fw->targets = g_malloc0_n(fw->num_targets, sizeof(*fw->targets));
+    for (i = 0, target = object->targets; target; i++, target = target->next) {
+        /* This link cannot be resolved yet, so stash the name for now */
+        fw->targets[i] = g_strdup(target->value);
+    }
+
+    if (object->size % (256 * MiB)) {
+        error_setg(errp,
+                   "Size of a CXL fixed memory window must my a multiple of 256MiB");
+        return;
+    }
+    fw->size = object->size;
+
+    if (object->has_interleave_granularity) {
+        fw->enc_int_gran =
+            cxl_interleave_granularity_enc(object->interleave_granularity,
+                                           errp);
+        if (*errp) {
+            return;
+        }
+    } else {
+        /* Default to 256 byte interleave */
+        fw->enc_int_gran = 0;
+    }
+
+    ms->cxl_devices_state->fixed_windows =
+        g_list_append(ms->cxl_devices_state->fixed_windows, fw);
+
+    return;
+}
+
+static int parse_cxl_fixed_memory_window(void *opaque, QemuOpts *opts,
+                                         Error **errp)
+{
+    CXLFixedMemoryWindowOptions *object = NULL;
+    MachineState *ms = MACHINE(opaque);
+    Error *err = NULL;
+    Visitor *v = opts_visitor_new(opts);
+
+    visit_type_CXLFixedMemoryWindowOptions(v, NULL, &object, errp);
+    visit_free(v);
+    if (!object) {
+        return -1;
+    }
+
+    set_cxl_fixed_memory_window_options(ms, object, &err);
+
+    qapi_free_CXLFixedMemoryWindowOptions(object);
+    if (err) {
+        error_propagate(errp, err);
+        return -1;
+    }
+
+    return 0;
+}
+
+void parse_cxl_fixed_memory_window_opts(MachineState *ms)
+{
+    qemu_opts_foreach(qemu_find_opts("cxl-fixed-memory-window"),
+                      parse_cxl_fixed_memory_window, ms, &error_fatal);
+}
+
+void cxl_fixed_memory_window_link_targets(Error **errp)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+
+    if (ms->cxl_devices_state && ms->cxl_devices_state->fixed_windows) {
+        GList *it;
+
+        for (it = ms->cxl_devices_state->fixed_windows; it; it = it->next) {
+            CXLFixedWindow *fw = it->data;
+            int i;
+
+            for (i = 0; i < fw->num_targets; i++) {
+                Object *o;
+                bool ambig;
+
+                o = object_resolve_path_type(fw->targets[i],
+                                             TYPE_PXB_CXL_DEVICE,
+                                             &ambig);
+                if (!o) {
+                    error_setg(errp, "Could not resolve CXLFM target %s",
+                               fw->targets[i]);
+                    return;
+                }
+                fw->target_hbs[i] = PXB_CXL_DEV(o);
+            }
+        }
+    }
+}
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
index 0eca715d10..27dff3868b 100644
--- a/hw/cxl/meson.build
+++ b/hw/cxl/meson.build
@@ -1,5 +1,9 @@
-softmmu_ss.add(when: 'CONFIG_CXL', if_true: files(
-  'cxl-component-utils.c',
-  'cxl-device-utils.c',
-  'cxl-mailbox-utils.c',
+specific_ss.add(when: 'CONFIG_CXL', if_true: files(
+      'cxl-component-utils.c',
+      'cxl-device-utils.c',
+      'cxl-mailbox-utils.c',
+      'cxl-host.c',
+))
+specific_ss.add(when: 'CONFIG_CXL', if_false: files(
+      'cxl-host-stubs.c',
 ))
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 6889362230..1b72c0b7b7 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -10,6 +10,9 @@
 #ifndef CXL_H
 #define CXL_H
 
+#include "qapi/qapi-types-machine.h"
+#include "qemu/option.h"
+#include "hw/pci/pci_bridge.h"
 #include "cxl_pci.h"
 #include "cxl_component.h"
 #include "cxl_device.h"
@@ -20,10 +23,27 @@
 #define TYPE_CXL_TYPE3_DEV "cxl-type3"
 #define CXL_WINDOW_MAX 10
 
+typedef struct CXLFixedWindow {
+    uint64_t size;
+    char **targets;
+    struct PXBDev *target_hbs[8];
+    uint8_t num_targets;
+    uint8_t enc_int_ways;
+    uint8_t enc_int_gran;
+    /* Todo: XOR based interleaving */
+    MemoryRegion mr;
+    hwaddr base;
+} CXLFixedWindow;
+
 typedef struct CXLState {
     bool is_enabled;
     MemoryRegion host_mr;
     unsigned int next_mr_idx;
+    GList *fixed_windows;
 } CXLState;
 
+extern QemuOptsList qemu_cxl_fixed_window_opts;
+void parse_cxl_fixed_memory_window_opts(MachineState *ms);
+void cxl_fixed_memory_window_link_targets(Error **errp);
+
 #endif
diff --git a/qapi/machine.json b/qapi/machine.json
index c87c81b803..87247d1d60 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -504,6 +504,21 @@
    'dst': 'uint16',
    'val': 'uint8' }}
 
+##
+# @CXLFixedMemoryWindowOptions:
+#
+# Create a CXL Fixed Memory Window (for OptsVisitor)
+#
+# @targets: Target root bridge IDs
+#
+# Since X.X //fixme
+##
+{ 'struct': 'CXLFixedMemoryWindowOptions',
+  'data': {
+      'size': 'size',
+      '*interleave-granularity': 'size',
+      'targets': ['str'] }}
+
 ##
 # @X86CPURegister32:
 #
diff --git a/qemu-options.hx b/qemu-options.hx
index ba3ae6a42a..b4d2cc6f48 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -467,6 +467,43 @@ SRST
         -numa hmat-cache,node-id=1,size=10K,level=1,associativity=direct,policy=write-back,line=8
 ERST
 
+DEF("cxl-fixed-memory-window", HAS_ARG, QEMU_OPTION_cxl_fixed_memory_window,
+    "-cxl-fixed-memory-window targets=firsttarget,targets=secondtarget,size=size[,interleave-granularity=granularity]\n",
+    QEMU_ARCH_ALL)
+SRST
+``-cxl-fixed-memory-window targets=firsttarget,targets=secondtarget,size=size[,interleave-granularity=granularity]``
+    Define a CXL Fixed Memory Window (CFMW).
+
+    Described in the CXL 2.0 ECN: CEDT CFMWS & QTG _DSM.
+
+    They are regions of Host Physical Addresses (HPA) on a system which
+    may be interleaved across one or more CXL host bridges.  The system
+    software will assign particular devices into these windows and
+    configure the downstream Host-managed Device Memory (HDM) decoders
+    in root ports, switch ports and devices appropriately to meet the
+    interleave requirements before enabling the memory devices.
+
+    ``targets=firsttarget`` provides the mapping to CXL host bridges
+    which may be identified by the id provied in the -device entry.
+    Multiple entries are needed to specify all the targets when
+    the fixed memory window represents interleaved memory.
+
+    ``size=size`` sets the size of the CFMW. This must be a multiple of
+    256MiB. The region will be aligned to 256MiB but the location is
+    platform and configuration dependent.
+
+    ``interleave-granularity=granularity`` sets the granularity of
+    interleave. Default 256KiB. Only 256KiB, 512KiB, 1024KiB, 2048KiB
+    4096KiB, 8192KiB and 16384KiB granularities supported.
+
+    Example:
+
+    ::
+
+        -cxl-fixed-memory-window -targets=cxl.0,-targets=cxl.1,size=128G,interleave-granularity=512k
+
+ERST
+
 DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd,
     "-add-fd fd=fd,set=set[,opaque=opaque]\n"
     "                Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL)
diff --git a/softmmu/vl.c b/softmmu/vl.c
index 5e1b35ba48..f83f158fff 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -91,6 +91,7 @@
 #include "qemu/config-file.h"
 #include "qemu/qemu-options.h"
 #include "qemu/main-loop.h"
+#include "hw/cxl/cxl.h"
 #ifdef CONFIG_VIRTFS
 #include "fsdev/qemu-fsdev.h"
 #endif
@@ -2744,6 +2745,7 @@ void qmp_x_exit_preconfig(Error **errp)
 
     qemu_init_board();
     qemu_create_cli_devices();
+    cxl_fixed_memory_window_link_targets(errp);
     qemu_machine_creation_done();
 
     if (loadvm) {
@@ -2805,6 +2807,7 @@ void qemu_init(int argc, char **argv, char **envp)
     qemu_add_opts(&qemu_msg_opts);
     qemu_add_opts(&qemu_name_opts);
     qemu_add_opts(&qemu_numa_opts);
+    qemu_add_opts(&qemu_cxl_fixed_window_opts);
     qemu_add_opts(&qemu_icount_opts);
     qemu_add_opts(&qemu_semihosting_config_opts);
     qemu_add_opts(&qemu_fw_cfg_opts);
@@ -2927,6 +2930,13 @@ void qemu_init(int argc, char **argv, char **envp)
                     exit(1);
                 }
                 break;
+            case QEMU_OPTION_cxl_fixed_memory_window:
+                opts = qemu_opts_parse_noisily(qemu_find_opts("cxl-fixed-memory-window"),
+                                               optarg, true);
+                if (!opts) {
+                    exit(1);
+                }
+                break;
             case QEMU_OPTION_display:
                 parse_display(optarg);
                 break;
@@ -3764,6 +3774,7 @@ void qemu_init(int argc, char **argv, char **envp)
 
     qemu_resolve_machine_memdev();
     parse_numa_opts(current_machine);
+    parse_cxl_fixed_memory_window_opts(current_machine);
 
     if (vmstate_dump_file) {
         /* dump and exit */
-- 
2.32.0


WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron via <qemu-devel@nongnu.org>
To: <qemu-devel@nongnu.org>, Marcel Apfelbaum <marcel@redhat.com>,
	"Michael S . Tsirkin" <mst@redhat.com>,
	Igor Mammedov <imammedo@redhat.com>
Cc: linux-cxl@vger.kernel.org,
	"Ben Widawsky" <ben.widawsky@intel.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	linuxarm@huawei.com,
	"Shameerali Kolothum Thodi"
	<shameerali.kolothum.thodi@huawei.com>,
	"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
	"Saransh Gupta1" <saransh@ibm.com>,
	"Shreyas Shah" <shreyas.shah@elastics.cloud>,
	"Chris Browy" <cbrowy@avery-design.com>,
	"Samarth Saxena" <samarths@cadence.com>,
	"Dan Williams" <dan.j.williams@intel.com>
Subject: [PATCH v4 29/42] hw/cxl/host: Add support for CXL Fixed Memory Windows.
Date: Mon, 24 Jan 2022 17:16:52 +0000	[thread overview]
Message-ID: <20220124171705.10432-30-Jonathan.Cameron@huawei.com> (raw)
In-Reply-To: <20220124171705.10432-1-Jonathan.Cameron@huawei.com>

From: Jonathan Cameron <jonathan.cameron@huawei.com>

The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.

For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.

ExampleS:
-cxl-fixed-memory-window targets=cxl.0,size=128G
-cxl-fixed-memory-window targets=cxl.1,size=128G
-cxl-fixed-memory-window targets=cxl0,targets=cxl.1,size=256G,interleave-granularity=2k

Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
  the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.

When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question.  If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.

A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
   up it's PA memory map.  We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
   but these links cannot be established until command line devices have
   been added.

Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.

[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)

Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
---
 hw/cxl/cxl-host-stubs.c |  22 +++++++
 hw/cxl/cxl-host.c       | 138 ++++++++++++++++++++++++++++++++++++++++
 hw/cxl/meson.build      |  12 ++--
 include/hw/cxl/cxl.h    |  20 ++++++
 qapi/machine.json       |  15 +++++
 qemu-options.hx         |  37 +++++++++++
 softmmu/vl.c            |  11 ++++
 7 files changed, 251 insertions(+), 4 deletions(-)

diff --git a/hw/cxl/cxl-host-stubs.c b/hw/cxl/cxl-host-stubs.c
new file mode 100644
index 0000000000..f942dda41b
--- /dev/null
+++ b/hw/cxl/cxl-host-stubs.c
@@ -0,0 +1,22 @@
+/*
+ * CXL host parameter parsing routine stubs
+ *
+ * Copyright (c) 2022 Huawei
+ */
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/option.h"
+#include "hw/cxl/cxl.h"
+
+QemuOptsList qemu_cxl_fixed_window_opts = {
+    .name = "cxl-fixed-memory-window",
+    .implied_opt_name = "type",
+    .head = QTAILQ_HEAD_INITIALIZER(qemu_cxl_fixed_window_opts.head),
+    .desc = { { 0 } }
+};
+
+void parse_cxl_fixed_memory_window_opts(MachineState *ms) {};
+
+void cxl_fixed_memory_window_link_targets(Error **errp) {};
+
+const MemoryRegionOps cfmws_ops;
diff --git a/hw/cxl/cxl-host.c b/hw/cxl/cxl-host.c
new file mode 100644
index 0000000000..9f303e6d8e
--- /dev/null
+++ b/hw/cxl/cxl-host.c
@@ -0,0 +1,138 @@
+/*
+ * CXL host parameter parsing routines
+ *
+ * Copyright (c) 2022 Huawei
+ * Modeled loosely on the NUMA options handling in hw/core/numa.c
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qemu/bitmap.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include "sysemu/qtest.h"
+#include "hw/boards.h"
+
+#include "qapi/opts-visitor.h"
+#include "qapi/qapi-visit-machine.h"
+#include "qemu/option.h"
+#include "hw/cxl/cxl.h"
+#include "hw/pci/pci_bus.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pci_host.h"
+#include "hw/pci/pcie_port.h"
+
+QemuOptsList qemu_cxl_fixed_window_opts = {
+    .name = "cxl-fixed-memory-window",
+    .implied_opt_name = "type",
+    .head = QTAILQ_HEAD_INITIALIZER(qemu_cxl_fixed_window_opts.head),
+    .desc = { { 0 } }
+};
+
+static void set_cxl_fixed_memory_window_options(MachineState *ms,
+                                                CXLFixedMemoryWindowOptions *object,
+                                                Error **errp)
+{
+    CXLFixedWindow *fw = g_malloc0(sizeof(*fw));
+    strList *target;
+    int i;
+
+    for (target = object->targets; target; target = target->next) {
+        fw->num_targets++;
+    }
+
+    fw->enc_int_ways = cxl_interleave_ways_enc(fw->num_targets, errp);
+    if (*errp) {
+        return;
+    }
+
+    fw->targets = g_malloc0_n(fw->num_targets, sizeof(*fw->targets));
+    for (i = 0, target = object->targets; target; i++, target = target->next) {
+        /* This link cannot be resolved yet, so stash the name for now */
+        fw->targets[i] = g_strdup(target->value);
+    }
+
+    if (object->size % (256 * MiB)) {
+        error_setg(errp,
+                   "Size of a CXL fixed memory window must my a multiple of 256MiB");
+        return;
+    }
+    fw->size = object->size;
+
+    if (object->has_interleave_granularity) {
+        fw->enc_int_gran =
+            cxl_interleave_granularity_enc(object->interleave_granularity,
+                                           errp);
+        if (*errp) {
+            return;
+        }
+    } else {
+        /* Default to 256 byte interleave */
+        fw->enc_int_gran = 0;
+    }
+
+    ms->cxl_devices_state->fixed_windows =
+        g_list_append(ms->cxl_devices_state->fixed_windows, fw);
+
+    return;
+}
+
+static int parse_cxl_fixed_memory_window(void *opaque, QemuOpts *opts,
+                                         Error **errp)
+{
+    CXLFixedMemoryWindowOptions *object = NULL;
+    MachineState *ms = MACHINE(opaque);
+    Error *err = NULL;
+    Visitor *v = opts_visitor_new(opts);
+
+    visit_type_CXLFixedMemoryWindowOptions(v, NULL, &object, errp);
+    visit_free(v);
+    if (!object) {
+        return -1;
+    }
+
+    set_cxl_fixed_memory_window_options(ms, object, &err);
+
+    qapi_free_CXLFixedMemoryWindowOptions(object);
+    if (err) {
+        error_propagate(errp, err);
+        return -1;
+    }
+
+    return 0;
+}
+
+void parse_cxl_fixed_memory_window_opts(MachineState *ms)
+{
+    qemu_opts_foreach(qemu_find_opts("cxl-fixed-memory-window"),
+                      parse_cxl_fixed_memory_window, ms, &error_fatal);
+}
+
+void cxl_fixed_memory_window_link_targets(Error **errp)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+
+    if (ms->cxl_devices_state && ms->cxl_devices_state->fixed_windows) {
+        GList *it;
+
+        for (it = ms->cxl_devices_state->fixed_windows; it; it = it->next) {
+            CXLFixedWindow *fw = it->data;
+            int i;
+
+            for (i = 0; i < fw->num_targets; i++) {
+                Object *o;
+                bool ambig;
+
+                o = object_resolve_path_type(fw->targets[i],
+                                             TYPE_PXB_CXL_DEVICE,
+                                             &ambig);
+                if (!o) {
+                    error_setg(errp, "Could not resolve CXLFM target %s",
+                               fw->targets[i]);
+                    return;
+                }
+                fw->target_hbs[i] = PXB_CXL_DEV(o);
+            }
+        }
+    }
+}
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
index 0eca715d10..27dff3868b 100644
--- a/hw/cxl/meson.build
+++ b/hw/cxl/meson.build
@@ -1,5 +1,9 @@
-softmmu_ss.add(when: 'CONFIG_CXL', if_true: files(
-  'cxl-component-utils.c',
-  'cxl-device-utils.c',
-  'cxl-mailbox-utils.c',
+specific_ss.add(when: 'CONFIG_CXL', if_true: files(
+      'cxl-component-utils.c',
+      'cxl-device-utils.c',
+      'cxl-mailbox-utils.c',
+      'cxl-host.c',
+))
+specific_ss.add(when: 'CONFIG_CXL', if_false: files(
+      'cxl-host-stubs.c',
 ))
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 6889362230..1b72c0b7b7 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -10,6 +10,9 @@
 #ifndef CXL_H
 #define CXL_H
 
+#include "qapi/qapi-types-machine.h"
+#include "qemu/option.h"
+#include "hw/pci/pci_bridge.h"
 #include "cxl_pci.h"
 #include "cxl_component.h"
 #include "cxl_device.h"
@@ -20,10 +23,27 @@
 #define TYPE_CXL_TYPE3_DEV "cxl-type3"
 #define CXL_WINDOW_MAX 10
 
+typedef struct CXLFixedWindow {
+    uint64_t size;
+    char **targets;
+    struct PXBDev *target_hbs[8];
+    uint8_t num_targets;
+    uint8_t enc_int_ways;
+    uint8_t enc_int_gran;
+    /* Todo: XOR based interleaving */
+    MemoryRegion mr;
+    hwaddr base;
+} CXLFixedWindow;
+
 typedef struct CXLState {
     bool is_enabled;
     MemoryRegion host_mr;
     unsigned int next_mr_idx;
+    GList *fixed_windows;
 } CXLState;
 
+extern QemuOptsList qemu_cxl_fixed_window_opts;
+void parse_cxl_fixed_memory_window_opts(MachineState *ms);
+void cxl_fixed_memory_window_link_targets(Error **errp);
+
 #endif
diff --git a/qapi/machine.json b/qapi/machine.json
index c87c81b803..87247d1d60 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -504,6 +504,21 @@
    'dst': 'uint16',
    'val': 'uint8' }}
 
+##
+# @CXLFixedMemoryWindowOptions:
+#
+# Create a CXL Fixed Memory Window (for OptsVisitor)
+#
+# @targets: Target root bridge IDs
+#
+# Since X.X //fixme
+##
+{ 'struct': 'CXLFixedMemoryWindowOptions',
+  'data': {
+      'size': 'size',
+      '*interleave-granularity': 'size',
+      'targets': ['str'] }}
+
 ##
 # @X86CPURegister32:
 #
diff --git a/qemu-options.hx b/qemu-options.hx
index ba3ae6a42a..b4d2cc6f48 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -467,6 +467,43 @@ SRST
         -numa hmat-cache,node-id=1,size=10K,level=1,associativity=direct,policy=write-back,line=8
 ERST
 
+DEF("cxl-fixed-memory-window", HAS_ARG, QEMU_OPTION_cxl_fixed_memory_window,
+    "-cxl-fixed-memory-window targets=firsttarget,targets=secondtarget,size=size[,interleave-granularity=granularity]\n",
+    QEMU_ARCH_ALL)
+SRST
+``-cxl-fixed-memory-window targets=firsttarget,targets=secondtarget,size=size[,interleave-granularity=granularity]``
+    Define a CXL Fixed Memory Window (CFMW).
+
+    Described in the CXL 2.0 ECN: CEDT CFMWS & QTG _DSM.
+
+    They are regions of Host Physical Addresses (HPA) on a system which
+    may be interleaved across one or more CXL host bridges.  The system
+    software will assign particular devices into these windows and
+    configure the downstream Host-managed Device Memory (HDM) decoders
+    in root ports, switch ports and devices appropriately to meet the
+    interleave requirements before enabling the memory devices.
+
+    ``targets=firsttarget`` provides the mapping to CXL host bridges
+    which may be identified by the id provied in the -device entry.
+    Multiple entries are needed to specify all the targets when
+    the fixed memory window represents interleaved memory.
+
+    ``size=size`` sets the size of the CFMW. This must be a multiple of
+    256MiB. The region will be aligned to 256MiB but the location is
+    platform and configuration dependent.
+
+    ``interleave-granularity=granularity`` sets the granularity of
+    interleave. Default 256KiB. Only 256KiB, 512KiB, 1024KiB, 2048KiB
+    4096KiB, 8192KiB and 16384KiB granularities supported.
+
+    Example:
+
+    ::
+
+        -cxl-fixed-memory-window -targets=cxl.0,-targets=cxl.1,size=128G,interleave-granularity=512k
+
+ERST
+
 DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd,
     "-add-fd fd=fd,set=set[,opaque=opaque]\n"
     "                Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL)
diff --git a/softmmu/vl.c b/softmmu/vl.c
index 5e1b35ba48..f83f158fff 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -91,6 +91,7 @@
 #include "qemu/config-file.h"
 #include "qemu/qemu-options.h"
 #include "qemu/main-loop.h"
+#include "hw/cxl/cxl.h"
 #ifdef CONFIG_VIRTFS
 #include "fsdev/qemu-fsdev.h"
 #endif
@@ -2744,6 +2745,7 @@ void qmp_x_exit_preconfig(Error **errp)
 
     qemu_init_board();
     qemu_create_cli_devices();
+    cxl_fixed_memory_window_link_targets(errp);
     qemu_machine_creation_done();
 
     if (loadvm) {
@@ -2805,6 +2807,7 @@ void qemu_init(int argc, char **argv, char **envp)
     qemu_add_opts(&qemu_msg_opts);
     qemu_add_opts(&qemu_name_opts);
     qemu_add_opts(&qemu_numa_opts);
+    qemu_add_opts(&qemu_cxl_fixed_window_opts);
     qemu_add_opts(&qemu_icount_opts);
     qemu_add_opts(&qemu_semihosting_config_opts);
     qemu_add_opts(&qemu_fw_cfg_opts);
@@ -2927,6 +2930,13 @@ void qemu_init(int argc, char **argv, char **envp)
                     exit(1);
                 }
                 break;
+            case QEMU_OPTION_cxl_fixed_memory_window:
+                opts = qemu_opts_parse_noisily(qemu_find_opts("cxl-fixed-memory-window"),
+                                               optarg, true);
+                if (!opts) {
+                    exit(1);
+                }
+                break;
             case QEMU_OPTION_display:
                 parse_display(optarg);
                 break;
@@ -3764,6 +3774,7 @@ void qemu_init(int argc, char **argv, char **envp)
 
     qemu_resolve_machine_memdev();
     parse_numa_opts(current_machine);
+    parse_cxl_fixed_memory_window_opts(current_machine);
 
     if (vmstate_dump_file) {
         /* dump and exit */
-- 
2.32.0



  parent reply	other threads:[~2022-01-24 17:31 UTC|newest]

Thread overview: 182+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-24 17:16 [PATCH v4 00/42] CXl 2.0 emulation Support Jonathan Cameron
2022-01-24 17:16 ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 01/42] hw/pci/cxl: Add a CXL component type (interface) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-25 13:53   ` Alex Bennée
2022-01-25 13:53     ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 02/42] hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-26 12:32   ` Alex Bennée
2022-01-26 12:32     ` Alex Bennée
2022-01-28 14:22     ` Jonathan Cameron
2022-01-28 14:22       ` Jonathan Cameron via
2022-01-28 14:46       ` Jonathan Cameron
2022-01-28 14:46         ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 03/42] MAINTAINERS: Add entry for Compute Express Link Emulation Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-26 18:06   ` Alex Bennée
2022-01-26 18:06     ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 04/42] hw/cxl/device: Introduce a CXL device (8.2.8) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-26 18:07   ` Alex Bennée
2022-01-26 18:07     ` Alex Bennée
2022-01-28 15:02     ` Jonathan Cameron
2022-01-28 15:02       ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 05/42] hw/cxl/device: Implement the CAP array (8.2.8.1-2) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-26 18:17   ` Alex Bennée
2022-01-26 18:17     ` Alex Bennée
2022-01-28 15:16     ` Jonathan Cameron
2022-01-28 15:16       ` Jonathan Cameron via
2022-01-28 16:37       ` Alex Bennée
2022-01-28 16:37         ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 06/42] hw/cxl/device: Implement basic mailbox (8.2.8.4) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-26 18:22   ` Alex Bennée
2022-01-26 18:22     ` Alex Bennée
2022-01-28 15:52     ` Jonathan Cameron
2022-01-28 15:52       ` Jonathan Cameron via
2022-01-27 11:31   ` Alex Bennée
2022-01-27 11:31     ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 07/42] hw/cxl/device: Add memory device utilities Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-27 11:28   ` Alex Bennée
2022-01-27 11:28     ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 08/42] hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-27 11:43   ` Alex Bennée
2022-01-27 11:43     ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 09/42] hw/cxl/device: Timestamp implementation (8.2.9.3) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-27 11:50   ` Alex Bennée
2022-01-27 11:50     ` Alex Bennée
2022-01-28 17:52     ` Jonathan Cameron
2022-01-28 17:52       ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 10/42] hw/cxl/device: Add log commands (8.2.9.4) + CEL Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-27 11:55   ` Alex Bennée
2022-01-27 11:55     ` Alex Bennée
2022-01-28 16:47     ` Jonathan Cameron
2022-01-28 16:47       ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 11/42] hw/pxb: Use a type for realizing expanders Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-27 12:01   ` Alex Bennée
2022-01-27 12:01     ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 12/42] hw/pci/cxl: Create a CXL bus type Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-27 12:05   ` Alex Bennée
2022-01-27 12:05     ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 13/42] hw/pxb: Allow creation of a CXL PXB (host bridge) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-27 13:59   ` Alex Bennée
2022-01-27 13:59     ` Alex Bennée
2022-01-28 18:20     ` Jonathan Cameron
2022-01-28 18:20       ` Jonathan Cameron via
2022-01-28 18:48       ` Jonathan Cameron
2022-01-28 18:48         ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 14/42] tests/acpi: allow DSDT.viot table changes Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-27 14:06   ` Alex Bennée
2022-01-27 14:06     ` Alex Bennée
2022-01-28 18:26     ` Jonathan Cameron
2022-01-28 18:26       ` Jonathan Cameron via
2022-01-28 18:34       ` Alex Bennée
2022-01-28 18:34         ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 15/42] acpi/pci: Consolidate host bridge setup Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-27 14:10   ` Alex Bennée
2022-01-27 14:10     ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 16/42] tests/acpi: Add update DSDT.viot Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-27 14:12   ` Alex Bennée
2022-01-27 14:12     ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 17/42] cxl: Machine level control on whether CXL support is enabled Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-27 14:18   ` Alex Bennée
2022-01-27 14:18     ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 18/42] hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 19/42] hw/cxl/rp: Add a root port Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 20/42] hw/cxl/device: Add a memory device (8.2.8.5) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 21/42] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 22/42] acpi/cxl: Add _OSC implementation (9.14.2) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 23/42] tests/acpi: allow CEDT table addition Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-02-09 18:18   ` Jonathan Cameron
2022-02-09 18:18     ` Jonathan Cameron via
2022-02-09 19:09     ` Michael S. Tsirkin
2022-02-09 19:09       ` Michael S. Tsirkin
2022-01-24 17:16 ` [PATCH v4 24/42] acpi/cxl: Create the CEDT (9.14.1) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 25/42] hw/cxl/device: Add some trivial commands Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 26/42] hw/cxl/device: Plumb real Label Storage Area (LSA) sizing Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 27/42] hw/cxl/device: Implement get/set Label Storage Area (LSA) Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-28 17:29   ` Jonathan Cameron
2022-01-28 17:29     ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 28/42] hw/cxl/component: Add utils for interleave parameter encoding/decoding Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` Jonathan Cameron [this message]
2022-01-24 17:16   ` [PATCH v4 29/42] hw/cxl/host: Add support for CXL Fixed Memory Windows Jonathan Cameron via
2022-01-25 17:02   ` Alex Bennée
2022-01-25 17:02     ` Alex Bennée
2022-01-25 17:51     ` Jonathan Cameron
2022-01-25 17:51       ` Jonathan Cameron via
2022-01-25 22:53       ` Alex Bennée
2022-01-25 22:53         ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 30/42] acpi/cxl: Introduce CFMWS structures in CEDT Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 31/42] hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxl Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-25 17:15   ` Alex Bennée
2022-01-25 17:15     ` Alex Bennée
2022-01-25 18:13     ` Jonathan Cameron
2022-01-25 18:13       ` Jonathan Cameron via
2022-01-25 18:16       ` Michael S. Tsirkin
2022-01-25 18:16         ` Michael S. Tsirkin
2022-01-26 12:24       ` Alex Bennée
2022-01-26 12:24         ` Alex Bennée
2022-01-24 17:16 ` [PATCH v4 32/42] pci/pcie_port: Add pci_find_port_by_pn() Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 33/42] CXL/cxl_component: Add cxl_get_hb_cstate() Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 34/42] mem/cxl_type3: Add read and write functions for associated hostmem Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 35/42] cxl/cxl-host: Add memops for CFMWS region Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:16 ` [PATCH v4 36/42] arm/virt: Allow virt/CEDT creation Jonathan Cameron
2022-01-24 17:16   ` Jonathan Cameron via
2022-01-24 17:17 ` [PATCH v4 37/42] hw/arm/virt: Basic CXL enablement on pci_expander_bridge instances pxb-cxl Jonathan Cameron
2022-01-24 17:17   ` Jonathan Cameron via
2022-01-24 17:17 ` [PATCH v4 38/42] RFC: softmmu/memory: Add ops to memory_region_ram_init_from_file Jonathan Cameron
2022-01-24 17:17   ` Jonathan Cameron via
2022-01-24 17:17 ` [PATCH v4 39/42] hw/cxl/component Add a dumb HDM decoder handler Jonathan Cameron
2022-01-24 17:17   ` Jonathan Cameron via
2022-01-24 17:17 ` [PATCH v4 40/42] i386/pc: Enable CXL fixed memory windows Jonathan Cameron
2022-01-24 17:17   ` Jonathan Cameron via
2022-01-24 17:17 ` [PATCH v4 41/42] qtest/acpi: Add reference CEDT tables Jonathan Cameron
2022-01-24 17:17   ` Jonathan Cameron via
2022-01-24 17:17 ` [PATCH v4 42/42] qtest/cxl: Add very basic sanity tests Jonathan Cameron
2022-01-24 17:17   ` Jonathan Cameron via
2022-01-24 18:11 ` [PATCH v4 00/42] CXl 2.0 emulation Support Jonathan Cameron
2022-01-24 18:11   ` Jonathan Cameron via
2022-01-25 13:55 ` Alex Bennée
2022-01-25 13:55   ` Alex Bennée
2022-01-25 15:49   ` Jonathan Cameron
2022-01-25 15:49     ` Jonathan Cameron via
2022-01-25 19:18 ` Ben Widawsky
2022-01-25 19:18   ` Ben Widawsky
2022-01-25 23:55   ` Ben Widawsky
2022-01-25 23:55     ` Ben Widawsky
2022-01-26  9:46     ` Jonathan Cameron
2022-01-26  9:46       ` Jonathan Cameron via
2022-01-27 14:22 ` Alex Bennée
2022-01-27 14:22   ` Alex Bennée
2022-01-27 16:42   ` Jonathan Cameron
2022-01-27 16:42     ` Jonathan Cameron via

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220124171705.10432-30-Jonathan.Cameron@huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=alex.bennee@linaro.org \
    --cc=ben.widawsky@intel.com \
    --cc=cbrowy@avery-design.com \
    --cc=dan.j.williams@intel.com \
    --cc=f4bug@amsat.org \
    --cc=imammedo@redhat.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=marcel@redhat.com \
    --cc=mst@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=samarths@cadence.com \
    --cc=saransh@ibm.com \
    --cc=shameerali.kolothum.thodi@huawei.com \
    --cc=shreyas.shah@elastics.cloud \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.