[PATCH 4.9 00/48] 4.9.300-rc1 review

[PATCH 4.9 00/48] 4.9.300-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.300 release.
There are 48 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.300-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.300-rc1

Ritesh Harjani <riteshh@linux.ibm.com>
    ext4: fix error handling in ext4_restore_inline_data()

Sergey Shtylyov <s.shtylyov@omp.ru>
    EDAC/xgene: Fix deferred probing

Sergey Shtylyov <s.shtylyov@omp.ru>
    EDAC/altera: Fix deferred probing

Riwen Lu <luriwen@kylinos.cn>
    rtc: cmos: Evaluate century appropriate

Dai Ngo <dai.ngo@oracle.com>
    nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.

John Meneghini <jmeneghi@redhat.com>
    scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe

Miaoqian Lin <linmq006@gmail.com>
    ASoC: fsl: Add missing error handling in pcm030_fabric_probe

Lior Nahmanson <liorna@nvidia.com>
    net: macsec: Verify that send_sci is on when setting Tx sci explicitly

Miquel Raynal <miquel.raynal@bootlin.com>
    net: ieee802154: Return meaningful error codes from the netlink helpers

Benjamin Gaignard <benjamin.gaignard@collabora.com>
    spi: mediatek: Avoid NULL pointer crash in interrupt

Kamal Dasu <kdasu.kdev@gmail.com>
    spi: bcm-qspi: check for valid cs before applying chip select

Joerg Roedel <jroedel@suse.de>
    iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()

Nick Lopez <github@glowingmonkey.org>
    drm/nouveau: fix off by one in BIOS boundary checking

Mark Brown <broonie@kernel.org>
    ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx()

Mark Brown <broonie@kernel.org>
    ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()

Mark Brown <broonie@kernel.org>
    ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()

Eric Dumazet <edumazet@google.com>
    af_packet: fix data-race in packet_setsockopt / packet_setsockopt

Eric Dumazet <edumazet@google.com>
    rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink()

Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
    net: amd-xgbe: Fix skb data length underflow

Raju Rangoju <Raju.Rangoju@amd.com>
    net: amd-xgbe: ensure to reset the tx_timer_active flag

Georgi Valkov <gvalkov@abv.bg>
    ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

Florian Westphal <fw@strlen.de>
    netfilter: nat: limit port clash resolution attempts

Florian Westphal <fw@strlen.de>
    netfilter: nat: remove l4 protocol port rovers

Eric Dumazet <edumazet@google.com>
    ipv4: tcp: send zero IPID in SYNACK messages

Eric Dumazet <edumazet@google.com>
    ipv4: raw: lock the socket in raw_bind()

Guenter Roeck <linux@roeck-us.net>
    hwmon: (lm90) Reduce maximum conversion rate for G781

Xianting Tian <xianting.tian@linux.alibaba.com>
    drm/msm: Fix wrong size calculation

Jianguo Wu <wujianguo@chinatelecom.cn>
    net-procfs: show net devices bound packet types

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4: nfs_atomic_open() can race when looking up a non-regular file

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4: Handle case where the lookup of a directory fails

Eric Dumazet <edumazet@google.com>
    ipv4: avoid using shared IP generator for connected sockets

Congyu Liu <liu3101@purdue.edu>
    net: fix information leakage in /proc/net/ptype

Ido Schimmel <idosch@nvidia.com>
    ipv6_tunnel: Rate limit warning messages

John Meneghini <jmeneghi@redhat.com>
    scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()

Christophe Leroy <christophe.leroy@csgroup.eu>
    powerpc/32: Fix boot failure with GCC latent entropy plugin

Alan Stern <stern@rowland.harvard.edu>
    USB: core: Fix hang in usb_kill_urb by adding memory barriers

Pavankumar Kondeti <quic_pkondeti@quicinc.com>
    usb: gadget: f_sourcesink: Fix isoc transfer for USB_SPEED_SUPER_PLUS

Alan Stern <stern@rowland.harvard.edu>
    usb-storage: Add unusual-devs entry for VL817 USB-SATA bridge

Cameron Williams <cang1@live.co.uk>
    tty: Add support for Brainboxes UC cards.

daniel.starke@siemens.com <daniel.starke@siemens.com>
    tty: n_gsm: fix SW flow control encoding/handling

Valentin Caron <valentin.caron@foss.st.com>
    serial: stm32: fix software flow control transfer

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    PM: wakeup: simplify the output logic of pm_show_wakelocks()

Jan Kara <jack@suse.cz>
    udf: Fix NULL ptr deref when converting from inline format

Jan Kara <jack@suse.cz>
    udf: Restore i_lenAlloc when inode expansion fails

Steffen Maier <maier@linux.ibm.com>
    scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devices

Vasily Gorbik <gor@linux.ibm.com>
    s390/hypfs: include z/VM guests with access control group set

Brian Gix <brian.gix@intel.com>
    Bluetooth: refactor malicious adv data check

Ziyang Xuan <william.xuanziyang@huawei.com>
    can: bcm: fix UAF of bcm op


-------------

Diffstat:

 Makefile                                        |   4 +-
 arch/powerpc/kernel/Makefile                    |   1 +
 arch/powerpc/lib/Makefile                       |   3 +
 arch/s390/hypfs/hypfs_vm.c                      |   6 +-
 drivers/edac/altera_edac.c                      |   2 +-
 drivers/edac/xgene_edac.c                       |   2 +-
 drivers/gpu/drm/msm/msm_drv.c                   |   2 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c |   2 +-
 drivers/hwmon/lm90.c                            |   2 +-
 drivers/iommu/amd_iommu_init.c                  |   2 +
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c        |  14 +++-
 drivers/net/macsec.c                            |   9 +++
 drivers/net/usb/ipheth.c                        |   6 +-
 drivers/rtc/rtc-mc146818-lib.c                  |   2 +-
 drivers/s390/scsi/zfcp_fc.c                     |  13 ++-
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c               |  41 +++++-----
 drivers/spi/spi-bcm-qspi.c                      |   2 +-
 drivers/spi/spi-mt65xx.c                        |   2 +-
 drivers/tty/n_gsm.c                             |   4 +-
 drivers/tty/serial/8250/8250_pci.c              | 100 +++++++++++++++++++++++-
 drivers/tty/serial/stm32-usart.c                |   2 +-
 drivers/usb/core/hcd.c                          |  14 ++++
 drivers/usb/core/urb.c                          |  12 +++
 drivers/usb/gadget/function/f_sourcesink.c      |   1 +
 drivers/usb/storage/unusual_devs.h              |  10 +++
 fs/ext4/inline.c                                |  10 ++-
 fs/nfs/dir.c                                    |  18 +++++
 fs/nfsd/nfs4state.c                             |   4 +-
 fs/udf/inode.c                                  |   9 +--
 include/linux/netdevice.h                       |   1 +
 include/net/ip.h                                |  21 +++--
 include/net/netfilter/nf_nat_l4proto.h          |   2 +-
 kernel/power/wakelock.c                         |  12 +--
 net/bluetooth/hci_event.c                       |  10 +--
 net/can/bcm.c                                   |  20 ++---
 net/core/net-procfs.c                           |  38 ++++++++-
 net/core/rtnetlink.c                            |   6 +-
 net/ieee802154/nl802154.c                       |   8 +-
 net/ipv4/ip_output.c                            |  11 ++-
 net/ipv4/raw.c                                  |   5 +-
 net/ipv6/ip6_tunnel.c                           |   8 +-
 net/netfilter/nf_nat_proto_common.c             |  36 ++++++---
 net/netfilter/nf_nat_proto_dccp.c               |   5 +-
 net/netfilter/nf_nat_proto_sctp.c               |   5 +-
 net/netfilter/nf_nat_proto_tcp.c                |   5 +-
 net/netfilter/nf_nat_proto_udp.c                |   5 +-
 net/netfilter/nf_nat_proto_udplite.c            |   5 +-
 net/packet/af_packet.c                          |  10 ++-
 sound/soc/fsl/pcm030-audio-fabric.c             |  11 ++-
 sound/soc/soc-ops.c                             |  29 ++++++-
 50 files changed, 410 insertions(+), 142 deletions(-)

[PATCH 4.9 01/48] can: bcm: fix UAF of bcm op

[Greg Kroah-Hartman]

From: Ziyang Xuan <william.xuanziyang@huawei.com>

Stopping tasklet and hrtimer rely on the active state of tasklet and
hrtimer sequentially in bcm_remove_op(), the op object will be freed
if they are all unactive. Assume the hrtimer timeout is short, the
hrtimer cb has been excuted after tasklet conditional judgment which
must be false after last round tasklet_kill() and before condition
hrtimer_active(), it is false when execute to hrtimer_active(). Bug
is triggerd, because the stopping action is end and the op object
will be freed, but the tasklet is scheduled. The resources of the op
object will occur UAF bug.

Move hrtimer_cancel() behind tasklet_kill() and switch 'while () {...}'
to 'do {...} while ()' to fix the op UAF problem.

Fixes: a06393ed0316 ("can: bcm: fix hrtimer/tasklet termination in bcm op removal")
Reported-by: syzbot+5ca851459ed04c778d1d@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/bcm.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -761,21 +761,21 @@ static struct bcm_op *bcm_find_op(struct
 static void bcm_remove_op(struct bcm_op *op)
 {
 	if (op->tsklet.func) {
-		while (test_bit(TASKLET_STATE_SCHED, &op->tsklet.state) ||
-		       test_bit(TASKLET_STATE_RUN, &op->tsklet.state) ||
-		       hrtimer_active(&op->timer)) {
-			hrtimer_cancel(&op->timer);
+		do {
 			tasklet_kill(&op->tsklet);
-		}
+			hrtimer_cancel(&op->timer);
+		} while (test_bit(TASKLET_STATE_SCHED, &op->tsklet.state) ||
+			 test_bit(TASKLET_STATE_RUN, &op->tsklet.state) ||
+			 hrtimer_active(&op->timer));
 	}
 
 	if (op->thrtsklet.func) {
-		while (test_bit(TASKLET_STATE_SCHED, &op->thrtsklet.state) ||
-		       test_bit(TASKLET_STATE_RUN, &op->thrtsklet.state) ||
-		       hrtimer_active(&op->thrtimer)) {
-			hrtimer_cancel(&op->thrtimer);
+		do {
 			tasklet_kill(&op->thrtsklet);
-		}
+			hrtimer_cancel(&op->thrtimer);
+		} while (test_bit(TASKLET_STATE_SCHED, &op->thrtsklet.state) ||
+			 test_bit(TASKLET_STATE_RUN, &op->thrtsklet.state) ||
+			 hrtimer_active(&op->thrtimer));
 	}
 
 	if ((op->frames) && (op->frames != &op->sframe))

[PATCH 4.9 02/48] Bluetooth: refactor malicious adv data check

[Greg Kroah-Hartman]

From: Brian Gix <brian.gix@intel.com>

commit 899663be5e75dc0174dc8bda0b5e6826edf0b29a upstream.

Check for out-of-bound read was being performed at the end of while
num_reports loop, and would fill journal with false positives. Added
check to beginning of loop processing so that it doesn't get checked
after ptr has been advanced.

Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: syphyr <syphyr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/hci_event.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -4967,6 +4967,11 @@ static void hci_le_adv_report_evt(struct
 		struct hci_ev_le_advertising_info *ev = ptr;
 		s8 rssi;
 
+		if (ptr > (void *)skb_tail_pointer(skb) - sizeof(*ev)) {
+			bt_dev_err(hdev, "Malicious advertising data.");
+			break;
+		}
+
 		if (ev->length <= HCI_MAX_AD_LENGTH &&
 		    ev->data + ev->length <= skb_tail_pointer(skb)) {
 			rssi = ev->data[ev->length];
@@ -4978,11 +4983,6 @@ static void hci_le_adv_report_evt(struct
 		}
 
 		ptr += sizeof(*ev) + ev->length + 1;
-
-		if (ptr > (void *) skb_tail_pointer(skb) - sizeof(*ev)) {
-			bt_dev_err(hdev, "Malicious advertising data. Stopping processing");
-			break;
-		}
 	}
 
 	hci_dev_unlock(hdev);

[PATCH 4.9 03/48] s390/hypfs: include z/VM guests with access control group set

[Greg Kroah-Hartman]

From: Vasily Gorbik <gor@linux.ibm.com>

commit 663d34c8df98740f1e90241e78e456d00b3c6cad upstream.

Currently if z/VM guest is allowed to retrieve hypervisor performance
data globally for all guests (privilege class B) the query is formed in a
way to include all guests but the group name is left empty. This leads to
that z/VM guests which have access control group set not being included
in the results (even local vm).

Change the query group identifier from empty to "any" to retrieve
information about all guests from any groups (or without a group set).

Cc: stable@vger.kernel.org
Fixes: 31cb4bd31a48 ("[S390] Hypervisor filesystem (s390_hypfs) for z/VM")
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/hypfs/hypfs_vm.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/arch/s390/hypfs/hypfs_vm.c
+++ b/arch/s390/hypfs/hypfs_vm.c
@@ -19,6 +19,7 @@
 
 static char local_guest[] = "        ";
 static char all_guests[] = "*       ";
+static char *all_groups = all_guests;
 static char *guest_query;
 
 struct diag2fc_data {
@@ -61,10 +62,11 @@ static int diag2fc(int size, char* query
 
 	memcpy(parm_list.userid, query, NAME_LEN);
 	ASCEBC(parm_list.userid, NAME_LEN);
-	parm_list.addr = (unsigned long) addr ;
+	memcpy(parm_list.aci_grp, all_groups, NAME_LEN);
+	ASCEBC(parm_list.aci_grp, NAME_LEN);
+	parm_list.addr = (unsigned long)addr;
 	parm_list.size = size;
 	parm_list.fmt = 0x02;
-	memset(parm_list.aci_grp, 0x40, NAME_LEN);
 	rc = -1;
 
 	diag_stat_inc(DIAG_STAT_X2FC);

[PATCH 4.9 04/48] scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devices

[Greg Kroah-Hartman]

From: Steffen Maier <maier@linux.ibm.com>

commit 8c9db6679be4348b8aae108e11d4be2f83976e30 upstream.

Suppose we have an environment with a number of non-NPIV FCP devices
(virtual HBAs / FCP devices / zfcp "adapter"s) sharing the same physical
FCP channel (HBA port) and its I_T nexus. Plus a number of storage target
ports zoned to such shared channel. Now one target port logs out of the
fabric causing an RSCN. Zfcp reacts with an ADISC ELS and subsequent port
recovery depending on the ADISC result. This happens on all such FCP
devices (in different Linux images) concurrently as they all receive a copy
of this RSCN. In the following we look at one of those FCP devices.

Requests other than FSF_QTCB_FCP_CMND can be slow until they get a
response.

Depending on which requests are affected by slow responses, there are
different recovery outcomes. Here we want to fix failed recoveries on port
or adapter level by avoiding recovery requests that can be slow.

We need the cached N_Port_ID for the remote port "link" test with ADISC.
Just before sending the ADISC, we now intentionally forget the old cached
N_Port_ID. The idea is that on receiving an RSCN for a port, we have to
assume that any cached information about this port is stale.  This forces a
fresh new GID_PN [FC-GS] nameserver lookup on any subsequent recovery for
the same port. Since we typically can still communicate with the nameserver
efficiently, we now reach steady state quicker: Either the nameserver still
does not know about the port so we stop recovery, or the nameserver already
knows the port potentially with a new N_Port_ID and we can successfully and
quickly perform open port recovery.  For the one case, where ADISC returns
successfully, we re-initialize port->d_id because that case does not
involve any port recovery.

This also solves a problem if the storage WWPN quickly logs into the fabric
again but with a different N_Port_ID. Such as on virtual WWPN takeover
during target NPIV failover.
[https://www.redbooks.ibm.com/abstracts/redp5477.html] In that case the
RSCN from the storage FDISC was ignored by zfcp and we could not
successfully recover the failover. On some later failback on the storage,
we could have been lucky if the virtual WWPN got the same old N_Port_ID
from the SAN switch as we still had cached.  Then the related RSCN
triggered a successful port reopen recovery.  However, there is no
guarantee to get the same N_Port_ID on NPIV FDISC.

Even though NPIV-enabled FCP devices are not affected by this problem, this
code change optimizes recovery time for gone remote ports as a side effect.
The timely drop of cached N_Port_IDs prevents unnecessary slow open port
attempts.

While the problem might have been in code before v2.6.32 commit
799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") this fix
depends on the gid_pn_work introduced with that commit, so we mark it as
culprit to satisfy fix dependencies.

Note: Point-to-point remote port is already handled separately and gets its
N_Port_ID from the cached peer_d_id. So resetting port->d_id in general
does not affect PtP.

Link: https://lore.kernel.org/r/20220118165803.3667947-1-maier@linux.ibm.com
Fixes: 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp")
Cc: <stable@vger.kernel.org> #2.6.32+
Suggested-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/scsi/zfcp_fc.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -518,6 +518,8 @@ static void zfcp_fc_adisc_handler(void *
 		goto out;
 	}
 
+	/* re-init to undo drop from zfcp_fc_adisc() */
+	port->d_id = ntoh24(adisc_resp->adisc_port_id);
 	/* port is good, unblock rport without going through erp */
 	zfcp_scsi_schedule_rport_register(port);
  out:
@@ -531,6 +533,7 @@ static int zfcp_fc_adisc(struct zfcp_por
 	struct zfcp_fc_req *fc_req;
 	struct zfcp_adapter *adapter = port->adapter;
 	struct Scsi_Host *shost = adapter->scsi_host;
+	u32 d_id;
 	int ret;
 
 	fc_req = kmem_cache_zalloc(zfcp_fc_req_cache, GFP_ATOMIC);
@@ -555,7 +558,15 @@ static int zfcp_fc_adisc(struct zfcp_por
 	fc_req->u.adisc.req.adisc_cmd = ELS_ADISC;
 	hton24(fc_req->u.adisc.req.adisc_port_id, fc_host_port_id(shost));
 
-	ret = zfcp_fsf_send_els(adapter, port->d_id, &fc_req->ct_els,
+	d_id = port->d_id; /* remember as destination for send els below */
+	/*
+	 * Force fresh GID_PN lookup on next port recovery.
+	 * Must happen after request setup and before sending request,
+	 * to prevent race with port->d_id re-init in zfcp_fc_adisc_handler().
+	 */
+	port->d_id = 0;
+
+	ret = zfcp_fsf_send_els(adapter, d_id, &fc_req->ct_els,
 				ZFCP_FC_CTELS_TMO);
 	if (ret)
 		kmem_cache_free(zfcp_fc_req_cache, fc_req);

[PATCH 4.9 05/48] udf: Restore i_lenAlloc when inode expansion fails

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit ea8569194b43f0f01f0a84c689388542c7254a1f upstream.

When we fail to expand inode from inline format to a normal format, we
restore inode to contain the original inline formatting but we forgot to
set i_lenAlloc back. The mismatch between i_lenAlloc and i_size was then
causing further problems such as warnings and lost data down the line.

Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
CC: stable@vger.kernel.org
Fixes: 7e49b6f2480c ("udf: Convert UDF to new truncate calling sequence")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/udf/inode.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -319,6 +319,7 @@ int udf_expand_file_adinicb(struct inode
 		unlock_page(page);
 		iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
 		inode->i_data.a_ops = &udf_adinicb_aops;
+		iinfo->i_lenAlloc = inode->i_size;
 		up_write(&iinfo->i_data_sem);
 	}
 	put_page(page);

[PATCH 4.9 06/48] udf: Fix NULL ptr deref when converting from inline format

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit 7fc3b7c2981bbd1047916ade327beccb90994eee upstream.

udf_expand_file_adinicb() calls directly ->writepage to write data
expanded into a page. This however misses to setup inode for writeback
properly and so we can crash on inode->i_wb dereference when submitting
page for IO like:

  BUG: kernel NULL pointer dereference, address: 0000000000000158
  #PF: supervisor read access in kernel mode
...
  <TASK>
  __folio_start_writeback+0x2ac/0x350
  __block_write_full_page+0x37d/0x490
  udf_expand_file_adinicb+0x255/0x400 [udf]
  udf_file_write_iter+0xbe/0x1b0 [udf]
  new_sync_write+0x125/0x1c0
  vfs_write+0x28e/0x400

Fix the problem by marking the page dirty and going through the standard
writeback path to write the page. Strictly speaking we would not even
have to write the page but we want to catch e.g. ENOSPC errors early.

Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
CC: stable@vger.kernel.org
Fixes: 52ebea749aae ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/udf/inode.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -259,10 +259,6 @@ int udf_expand_file_adinicb(struct inode
 	char *kaddr;
 	struct udf_inode_info *iinfo = UDF_I(inode);
 	int err;
-	struct writeback_control udf_wbc = {
-		.sync_mode = WB_SYNC_NONE,
-		.nr_to_write = 1,
-	};
 
 	WARN_ON_ONCE(!inode_is_locked(inode));
 	if (!iinfo->i_lenAlloc) {
@@ -306,8 +302,10 @@ int udf_expand_file_adinicb(struct inode
 		iinfo->i_alloc_type = ICBTAG_FLAG_AD_LONG;
 	/* from now on we have normal address_space methods */
 	inode->i_data.a_ops = &udf_aops;
+	set_page_dirty(page);
+	unlock_page(page);
 	up_write(&iinfo->i_data_sem);
-	err = inode->i_data.a_ops->writepage(page, &udf_wbc);
+	err = filemap_fdatawrite(inode->i_mapping);
 	if (err) {
 		/* Restore everything back so that we don't lose data... */
 		lock_page(page);

[PATCH 4.9 07/48] PM: wakeup: simplify the output logic of pm_show_wakelocks()

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c9d967b2ce40d71e968eb839f36c936b8a9cf1ea upstream.

The buffer handling in pm_show_wakelocks() is tricky, and hopefully
correct.  Ensure it really is correct by using sysfs_emit_at() which
handles all of the tricky string handling logic in a PAGE_SIZE buffer
for us automatically as this is a sysfs file being read from.

Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/power/wakelock.c |   12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

--- a/kernel/power/wakelock.c
+++ b/kernel/power/wakelock.c
@@ -38,23 +38,19 @@ ssize_t pm_show_wakelocks(char *buf, boo
 {
 	struct rb_node *node;
 	struct wakelock *wl;
-	char *str = buf;
-	char *end = buf + PAGE_SIZE;
+	int len = 0;
 
 	mutex_lock(&wakelocks_lock);
 
 	for (node = rb_first(&wakelocks_tree); node; node = rb_next(node)) {
 		wl = rb_entry(node, struct wakelock, node);
 		if (wl->ws.active == show_active)
-			str += scnprintf(str, end - str, "%s ", wl->name);
+			len += sysfs_emit_at(buf, len, "%s ", wl->name);
 	}
-	if (str > buf)
-		str--;
-
-	str += scnprintf(str, end - str, "\n");
+	len += sysfs_emit_at(buf, len, "\n");
 
 	mutex_unlock(&wakelocks_lock);
-	return (str - buf);
+	return len;
 }
 
 #if CONFIG_PM_WAKELOCKS_LIMIT > 0

[PATCH 4.9 08/48] serial: stm32: fix software flow control transfer

[Greg Kroah-Hartman]

From: Valentin Caron <valentin.caron@foss.st.com>

commit 037b91ec7729524107982e36ec4b40f9b174f7a2 upstream.

x_char is ignored by stm32_usart_start_tx() when xmit buffer is empty.

Fix start_tx condition to allow x_char to be sent.

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20220111164441.6178-3-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/stm32-usart.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -389,7 +389,7 @@ static void stm32_start_tx(struct uart_p
 {
 	struct circ_buf *xmit = &port->state->xmit;
 
-	if (uart_circ_empty(xmit))
+	if (uart_circ_empty(xmit) && !port->x_char)
 		return;
 
 	stm32_transmit_chars(port);

[PATCH 4.9 09/48] tty: n_gsm: fix SW flow control encoding/handling

[Greg Kroah-Hartman]

From: daniel.starke@siemens.com <daniel.starke@siemens.com>

commit 8838b2af23caf1ff0610caef2795d6668a013b2d upstream.

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.2.7.3 states that DC1 (XON) and DC3 (XOFF)
are the control characters defined in ISO/IEC 646. These shall be quoted if
seen in the data stream to avoid interpretation as flow control characters.

ISO/IEC 646 refers to the set of ISO standards described as the ISO
7-bit coded character set for information interchange. Its final version
is also known as ITU T.50.
See https://www.itu.int/rec/T-REC-T.50-199209-I/en

To abide the standard it is needed to quote DC1 and DC3 correctly if these
are seen as data bytes and not as control characters. The current
implementation already tries to enforce this but fails to catch all
defined cases. 3GPP 27.010 chapter 5.2.7.3 clearly states that the most
significant bit shall be ignored for DC1 and DC3 handling. The current
implementation handles only the case with the most significant bit set 0.
Cases in which DC1 and DC3 have the most significant bit set 1 are left
unhandled.

This patch fixes this by masking the data bytes with ISO_IEC_646_MASK (only
the 7 least significant bits set 1) before comparing them with XON
(a.k.a. DC1) and XOFF (a.k.a. DC3) when testing which byte values need
quotation via byte stuffing.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220120101857.2509-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -329,6 +329,7 @@ static struct tty_driver *gsm_tty_driver
 #define GSM1_ESCAPE_BITS	0x20
 #define XON			0x11
 #define XOFF			0x13
+#define ISO_IEC_646_MASK	0x7F
 
 static const struct tty_port_operations gsm_port_ops;
 
@@ -547,7 +548,8 @@ static int gsm_stuff_frame(const u8 *inp
 	int olen = 0;
 	while (len--) {
 		if (*input == GSM1_SOF || *input == GSM1_ESCAPE
-		    || *input == XON || *input == XOFF) {
+		    || (*input & ISO_IEC_646_MASK) == XON
+		    || (*input & ISO_IEC_646_MASK) == XOFF) {
 			*output++ = GSM1_ESCAPE;
 			*output++ = *input++ ^ GSM1_ESCAPE_BITS;
 			olen++;

[PATCH 4.9 10/48] tty: Add support for Brainboxes UC cards.

[Greg Kroah-Hartman]

From: Cameron Williams <cang1@live.co.uk>

commit 152d1afa834c84530828ee031cf07a00e0fc0b8c upstream.

This commit adds support for the some of the Brainboxes PCI range of
cards, including the UC-101, UC-235/246, UC-257, UC-268, UC-275/279,
UC-302, UC-310, UC-313, UC-320/324, UC-346, UC-357, UC-368
and UC-420/431.

Signed-off-by: Cameron Williams <cang1@live.co.uk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/AM5PR0202MB2564688493F7DD9B9C610827C45E9@AM5PR0202MB2564.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |  100 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 98 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5238,8 +5238,30 @@ static struct pci_device_id serial_pci_t
 	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,    /* 135a.0dc0 */
 		pbn_b2_4_115200 },
+	/* Brainboxes Devices */
 	/*
-	 * BrainBoxes UC-260
+	* Brainboxes UC-101
+	*/
+	{       PCI_VENDOR_ID_INTASHIELD, 0x0BA1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-235/246
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AA1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_1_115200 },
+	/*
+	 * Brainboxes UC-257
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0861,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-260/271/701/756
 	 */
 	{	PCI_VENDOR_ID_INTASHIELD, 0x0D21,
 		PCI_ANY_ID, PCI_ANY_ID,
@@ -5247,7 +5269,81 @@ static struct pci_device_id serial_pci_t
 		pbn_b2_4_115200 },
 	{	PCI_VENDOR_ID_INTASHIELD, 0x0E34,
 		PCI_ANY_ID, PCI_ANY_ID,
-		 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
+		PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
+		pbn_b2_4_115200 },
+	/*
+	 * Brainboxes UC-268
+	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x0841,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
+	/*
+	 * Brainboxes UC-275/279
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0881,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_8_115200 },
+	/*
+	 * Brainboxes UC-302
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x08E1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-310
+	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x08C1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-313
+	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x08A3,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-320/324
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0A61,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_1_115200 },
+	/*
+	 * Brainboxes UC-346
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B02,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
+	/*
+	 * Brainboxes UC-357
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0A81,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0A83,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-368
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C41,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
+	/*
+	 * Brainboxes UC-420/431
+	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x0921,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
 		pbn_b2_4_115200 },
 	/*
 	 * Perle PCI-RAS cards

[PATCH 4.9 11/48] usb-storage: Add unusual-devs entry for VL817 USB-SATA bridge

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 5b67b315037250a61861119683e7fcb509deea25 upstream.

Two people have reported (and mentioned numerous other reports on the
web) that VIA's VL817 USB-SATA bridge does not work with the uas
driver.  Typical log messages are:

[ 3606.232149] sd 14:0:0:0: [sdg] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[ 3606.232154] sd 14:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 18 0c c9 80 00 00 00 80 00 00
[ 3606.306257] usb 4-4.4: reset SuperSpeed Plus Gen 2x1 USB device number 11 using xhci_hcd
[ 3606.328584] scsi host14: uas_eh_device_reset_handler success

Surprisingly, the devices do seem to work okay for some other people.
The cause of the differing behaviors is not known.

In the hope of getting the devices to work for the most users, even at
the possible cost of degraded performance for some, this patch adds an
unusual_devs entry for the VL817 to block it from binding to the uas
driver by default.  Users will be able to override this entry by means
of a module parameter, if they want.

CC: <stable@vger.kernel.org>
Reported-by: DocMAX <mail@vacharakis.de>
Reported-and-tested-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Ye8IsK2sjlEv1rqU@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_devs.h |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2308,6 +2308,16 @@ UNUSUAL_DEV(  0x2027, 0xa001, 0x0000, 0x
 		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
+/*
+ * Reported by DocMAX <mail@vacharakis.de>
+ * and Thomas Weißschuh <linux@weissschuh.net>
+ */
+UNUSUAL_DEV( 0x2109, 0x0715, 0x9999, 0x9999,
+		"VIA Labs, Inc.",
+		"VL817 SATA Bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
 		"ST",
 		"2A",

[PATCH 4.9 12/48] usb: gadget: f_sourcesink: Fix isoc transfer for USB_SPEED_SUPER_PLUS

[Greg Kroah-Hartman]

From: Pavankumar Kondeti <quic_pkondeti@quicinc.com>

commit 904edf8aeb459697129be5fde847e2a502f41fd9 upstream.

Currently when gadget enumerates in super speed plus, the isoc
endpoint request buffer size is not calculated correctly. Fix
this by checking the gadget speed against USB_SPEED_SUPER_PLUS
and update the request buffer size.

Fixes: 90c4d05780d4 ("usb: fix various gadgets null ptr deref on 10gbps cabling.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Link: https://lore.kernel.org/r/1642820602-20619-1-git-send-email-quic_pkondeti@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_sourcesink.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -587,6 +587,7 @@ static int source_sink_start_ep(struct f
 
 	if (is_iso) {
 		switch (speed) {
+		case USB_SPEED_SUPER_PLUS:
 		case USB_SPEED_SUPER:
 			size = ss->isoc_maxpacket *
 					(ss->isoc_mult + 1) *

[PATCH 4.9 13/48] USB: core: Fix hang in usb_kill_urb by adding memory barriers

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 26fbe9772b8c459687930511444ce443011f86bf upstream.

The syzbot fuzzer has identified a bug in which processes hang waiting
for usb_kill_urb() to return.  It turns out the issue is not unlinking
the URB; that works just fine.  Rather, the problem arises when the
wakeup notification that the URB has completed is not received.

The reason is memory-access ordering on SMP systems.  In outline form,
usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on
different CPUs perform the following actions:

CPU 0					CPU 1
----------------------------		---------------------------------
usb_kill_urb():				__usb_hcd_giveback_urb():
  ...					  ...
  atomic_inc(&urb->reject);		  atomic_dec(&urb->use_count);
  ...					  ...
  wait_event(usb_kill_urb_queue,
	atomic_read(&urb->use_count) == 0);
					  if (atomic_read(&urb->reject))
						wake_up(&usb_kill_urb_queue);

Confining your attention to urb->reject and urb->use_count, you can
see that the overall pattern of accesses on CPU 0 is:

	write urb->reject, then read urb->use_count;

whereas the overall pattern of accesses on CPU 1 is:

	write urb->use_count, then read urb->reject.

This pattern is referred to in memory-model circles as SB (for "Store
Buffering"), and it is well known that without suitable enforcement of
the desired order of accesses -- in the form of memory barriers -- it
is entirely possible for one or both CPUs to execute their reads ahead
of their writes.  The end result will be that sometimes CPU 0 sees the
old un-decremented value of urb->use_count while CPU 1 sees the old
un-incremented value of urb->reject.  Consequently CPU 0 ends up on
the wait queue and never gets woken up, leading to the observed hang
in usb_kill_urb().

The same pattern of accesses occurs in usb_poison_urb() and the
failure pathway of usb_hcd_submit_urb().

The problem is fixed by adding suitable memory barriers.  To provide
proper memory-access ordering in the SB pattern, a full barrier is
required on both CPUs.  The atomic_inc() and atomic_dec() accesses
themselves don't provide any memory ordering, but since they are
present, we can use the optimized smp_mb__after_atomic() memory
barrier in the various routines to obtain the desired effect.

This patch adds the necessary memory barriers.

CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+76629376e06e2c2ad626@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Ye8K0QYee0Q0Nna2@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hcd.c |   14 ++++++++++++++
 drivers/usb/core/urb.c |   12 ++++++++++++
 2 files changed, 26 insertions(+)

--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1668,6 +1668,13 @@ int usb_hcd_submit_urb (struct urb *urb,
 		urb->hcpriv = NULL;
 		INIT_LIST_HEAD(&urb->urb_list);
 		atomic_dec(&urb->use_count);
+		/*
+		 * Order the write of urb->use_count above before the read
+		 * of urb->reject below.  Pairs with the memory barriers in
+		 * usb_kill_urb() and usb_poison_urb().
+		 */
+		smp_mb__after_atomic();
+
 		atomic_dec(&urb->dev->urbnum);
 		if (atomic_read(&urb->reject))
 			wake_up(&usb_kill_urb_queue);
@@ -1777,6 +1784,13 @@ static void __usb_hcd_giveback_urb(struc
 
 	usb_anchor_resume_wakeups(anchor);
 	atomic_dec(&urb->use_count);
+	/*
+	 * Order the write of urb->use_count above before the read
+	 * of urb->reject below.  Pairs with the memory barriers in
+	 * usb_kill_urb() and usb_poison_urb().
+	 */
+	smp_mb__after_atomic();
+
 	if (unlikely(atomic_read(&urb->reject)))
 		wake_up(&usb_kill_urb_queue);
 	usb_put_urb(urb);
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -684,6 +684,12 @@ void usb_kill_urb(struct urb *urb)
 	if (!(urb && urb->dev && urb->ep))
 		return;
 	atomic_inc(&urb->reject);
+	/*
+	 * Order the write of urb->reject above before the read
+	 * of urb->use_count below.  Pairs with the barriers in
+	 * __usb_hcd_giveback_urb() and usb_hcd_submit_urb().
+	 */
+	smp_mb__after_atomic();
 
 	usb_hcd_unlink_urb(urb, -ENOENT);
 	wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
@@ -725,6 +731,12 @@ void usb_poison_urb(struct urb *urb)
 	if (!urb)
 		return;
 	atomic_inc(&urb->reject);
+	/*
+	 * Order the write of urb->reject above before the read
+	 * of urb->use_count below.  Pairs with the barriers in
+	 * __usb_hcd_giveback_urb() and usb_hcd_submit_urb().
+	 */
+	smp_mb__after_atomic();
 
 	if (!urb->dev || !urb->ep)
 		return;

[PATCH 4.9 14/48] powerpc/32: Fix boot failure with GCC latent entropy plugin

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

commit bba496656a73fc1d1330b49c7f82843836e9feb1 upstream.

Boot fails with GCC latent entropy plugin enabled.

This is due to early boot functions trying to access 'latent_entropy'
global data while the kernel is not relocated at its final
destination yet.

As there is no way to tell GCC to use PTRRELOC() to access it,
disable latent entropy plugin in early_32.o and feature-fixups.o and
code-patching.o

Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin")
Cc: stable@vger.kernel.org # v4.9+
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215217
Link: https://lore.kernel.org/r/2bac55483b8daf5b1caa163a45fa5f9cdbe18be4.1640178426.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/Makefile |    1 +
 arch/powerpc/lib/Makefile    |    3 +++
 2 files changed, 4 insertions(+)

--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -14,6 +14,7 @@ CFLAGS_prom_init.o      += -fPIC
 CFLAGS_btext.o		+= -fPIC
 endif
 
+CFLAGS_setup_32.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 CFLAGS_cputable.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 CFLAGS_prom_init.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 CFLAGS_btext.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -9,6 +9,9 @@ ccflags-$(CONFIG_PPC64)	:= $(NO_MINIMAL_
 CFLAGS_REMOVE_code-patching.o = $(CC_FLAGS_FTRACE)
 CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE)
 
+CFLAGS_code-patching.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
+CFLAGS_feature-fixups.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
+
 obj-y += string.o alloc.o crtsavres.o code-patching.o \
 	 feature-fixups.o
 

[PATCH 4.9 15/48] scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()

[Greg Kroah-Hartman]

From: John Meneghini <jmeneghi@redhat.com>

commit 847f9ea4c5186fdb7b84297e3eeed9e340e83fce upstream.

The bnx2fc_destroy() functions are removing the interface before calling
destroy_work. This results multiple WARNings from sysfs_remove_group() as
the controller rport device attributes are removed too early.

Replace the fcoe_port's destroy_work queue. It's not needed.

The problem is easily reproducible with the following steps.

Example:

  $ dmesg -w &
  $ systemctl enable --now fcoe
  $ fipvlan -s -c ens2f1
  $ fcoeadm -d ens2f1.802
  [  583.464488] host2: libfc: Link down on port (7500a1)
  [  583.472651] bnx2fc: 7500a1 - rport not created Yet!!
  [  583.490468] ------------[ cut here ]------------
  [  583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0'
  [  583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80
  [  583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ...
  [  583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1
  [  583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
  [  584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc]
  [  584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80
  [  584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ...
  [  584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282
  [  584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000
  [  584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0
  [  584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00
  [  584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400
  [  584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004
  [  584.355379] FS:  0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000
  [  584.394419] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [  584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0
  [  584.454888] Call Trace:
  [  584.466108]  device_del+0xb2/0x3e0
  [  584.481701]  device_unregister+0x13/0x60
  [  584.501306]  bsg_unregister_queue+0x5b/0x80
  [  584.522029]  bsg_remove_queue+0x1c/0x40
  [  584.541884]  fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc]
  [  584.573823]  process_one_work+0x1e3/0x3b0
  [  584.592396]  worker_thread+0x50/0x3b0
  [  584.609256]  ? rescuer_thread+0x370/0x370
  [  584.628877]  kthread+0x149/0x170
  [  584.643673]  ? set_kthread_struct+0x40/0x40
  [  584.662909]  ret_from_fork+0x22/0x30
  [  584.680002] ---[ end trace 53575ecefa942ece ]---

Link: https://lore.kernel.org/r/20220115040044.1013475-1-jmeneghi@redhat.com
Fixes: 0cbf32e1681d ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks")
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Co-developed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c |   20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -79,7 +79,7 @@ static int bnx2fc_bind_pcidev(struct bnx
 static void bnx2fc_unbind_pcidev(struct bnx2fc_hba *hba);
 static struct fc_lport *bnx2fc_if_create(struct bnx2fc_interface *interface,
 				  struct device *parent, int npiv);
-static void bnx2fc_destroy_work(struct work_struct *work);
+static void bnx2fc_port_destroy(struct fcoe_port *port);
 
 static struct bnx2fc_hba *bnx2fc_hba_lookup(struct net_device *phys_dev);
 static struct bnx2fc_interface *bnx2fc_interface_lookup(struct net_device
@@ -884,9 +884,6 @@ static void bnx2fc_indicate_netevent(voi
 				__bnx2fc_destroy(interface);
 		}
 		mutex_unlock(&bnx2fc_dev_lock);
-
-		/* Ensure ALL destroy work has been completed before return */
-		flush_workqueue(bnx2fc_wq);
 		return;
 
 	default:
@@ -1194,8 +1191,8 @@ static int bnx2fc_vport_destroy(struct f
 	mutex_unlock(&n_port->lp_mutex);
 	bnx2fc_free_vport(interface->hba, port->lport);
 	bnx2fc_port_shutdown(port->lport);
+	bnx2fc_port_destroy(port);
 	bnx2fc_interface_put(interface);
-	queue_work(bnx2fc_wq, &port->destroy_work);
 	return 0;
 }
 
@@ -1504,7 +1501,6 @@ static struct fc_lport *bnx2fc_if_create
 	port->lport = lport;
 	port->priv = interface;
 	port->get_netdev = bnx2fc_netdev;
-	INIT_WORK(&port->destroy_work, bnx2fc_destroy_work);
 
 	/* Configure fcoe_port */
 	rc = bnx2fc_lport_config(lport);
@@ -1632,8 +1628,8 @@ static void __bnx2fc_destroy(struct bnx2
 	bnx2fc_interface_cleanup(interface);
 	bnx2fc_stop(interface);
 	list_del(&interface->list);
+	bnx2fc_port_destroy(port);
 	bnx2fc_interface_put(interface);
-	queue_work(bnx2fc_wq, &port->destroy_work);
 }
 
 /**
@@ -1674,15 +1670,12 @@ netdev_err:
 	return rc;
 }
 
-static void bnx2fc_destroy_work(struct work_struct *work)
+static void bnx2fc_port_destroy(struct fcoe_port *port)
 {
-	struct fcoe_port *port;
 	struct fc_lport *lport;
 
-	port = container_of(work, struct fcoe_port, destroy_work);
 	lport = port->lport;
-
-	BNX2FC_HBA_DBG(lport, "Entered bnx2fc_destroy_work\n");
+	BNX2FC_HBA_DBG(lport, "Entered %s, destroying lport %p\n", __func__, lport);
 
 	bnx2fc_if_destroy(lport);
 }
@@ -2522,9 +2515,6 @@ static void bnx2fc_ulp_exit(struct cnic_
 			__bnx2fc_destroy(interface);
 	mutex_unlock(&bnx2fc_dev_lock);
 
-	/* Ensure ALL destroy work has been completed before return */
-	flush_workqueue(bnx2fc_wq);
-
 	bnx2fc_ulp_stop(hba);
 	/* unregister cnic device */
 	if (test_and_clear_bit(BNX2FC_CNIC_REGISTERED, &hba->reg_with_cnic))

[PATCH 4.9 16/48] ipv6_tunnel: Rate limit warning messages

[Greg Kroah-Hartman]

From: Ido Schimmel <idosch@nvidia.com>

commit 6cee105e7f2ced596373951d9ea08dacc3883c68 upstream.

The warning messages can be invoked from the data path for every packet
transmitted through an ip6gre netdev, leading to high CPU utilization.

Fix that by rate limiting the messages.

Fixes: 09c6bbf090ec ("[IPV6]: Do mandatory IPv6 tunnel endpoint checks in realtime")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Tested-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_tunnel.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -1007,12 +1007,12 @@ int ip6_tnl_xmit_ctl(struct ip6_tnl *t,
 			ldev = dev_get_by_index_rcu(net, p->link);
 
 		if (unlikely(!ipv6_chk_addr(net, laddr, ldev, 0)))
-			pr_warn("%s xmit: Local address not yet configured!\n",
-				p->name);
+			pr_warn_ratelimited("%s xmit: Local address not yet configured!\n",
+					    p->name);
 		else if (!ipv6_addr_is_multicast(raddr) &&
 			 unlikely(ipv6_chk_addr(net, raddr, NULL, 0)))
-			pr_warn("%s xmit: Routing loop! Remote address found on this node!\n",
-				p->name);
+			pr_warn_ratelimited("%s xmit: Routing loop! Remote address found on this node!\n",
+					    p->name);
 		else
 			ret = 1;
 		rcu_read_unlock();

[PATCH 4.9 17/48] net: fix information leakage in /proc/net/ptype

[Greg Kroah-Hartman]

From: Congyu Liu <liu3101@purdue.edu>

commit 47934e06b65637c88a762d9c98329ae6e3238888 upstream.

In one net namespace, after creating a packet socket without binding
it to a device, users in other net namespaces can observe the new
`packet_type` added by this packet socket by reading `/proc/net/ptype`
file. This is minor information leakage as packet socket is
namespace aware.

Add a net pointer in `packet_type` to keep the net namespace of
of corresponding packet socket. In `ptype_seq_show`, this net pointer
must be checked when it is not NULL.

Fixes: 2feb27dbe00c ("[NETNS]: Minor information leak via /proc/net/ptype file.")
Signed-off-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netdevice.h |    1 +
 net/core/net-procfs.c     |    3 ++-
 net/packet/af_packet.c    |    2 ++
 3 files changed, 5 insertions(+), 1 deletion(-)

--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2237,6 +2237,7 @@ struct packet_type {
 					 struct net_device *);
 	bool			(*id_match)(struct packet_type *ptype,
 					    struct sock *sk);
+	struct net		*af_packet_net;
 	void			*af_packet_priv;
 	struct list_head	list;
 };
--- a/net/core/net-procfs.c
+++ b/net/core/net-procfs.c
@@ -278,7 +278,8 @@ static int ptype_seq_show(struct seq_fil
 
 	if (v == SEQ_START_TOKEN)
 		seq_puts(seq, "Type Device      Function\n");
-	else if (pt->dev == NULL || dev_net(pt->dev) == seq_file_net(seq)) {
+	else if ((!pt->af_packet_net || net_eq(pt->af_packet_net, seq_file_net(seq))) &&
+		 (!pt->dev || net_eq(dev_net(pt->dev), seq_file_net(seq)))) {
 		if (pt->type == htons(ETH_P_ALL))
 			seq_puts(seq, "ALL ");
 		else
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1705,6 +1705,7 @@ static int fanout_add(struct sock *sk, u
 		match->prot_hook.dev = po->prot_hook.dev;
 		match->prot_hook.func = packet_rcv_fanout;
 		match->prot_hook.af_packet_priv = match;
+		match->prot_hook.af_packet_net = read_pnet(&match->net);
 		match->prot_hook.id_match = match_fanout_group;
 		list_add(&match->list, &fanout_list);
 	}
@@ -3310,6 +3311,7 @@ static int packet_create(struct net *net
 		po->prot_hook.func = packet_rcv_spkt;
 
 	po->prot_hook.af_packet_priv = sk;
+	po->prot_hook.af_packet_net = sock_net(sk);
 
 	if (proto) {
 		po->prot_hook.type = proto;

[PATCH 4.9 18/48] ipv4: avoid using shared IP generator for connected sockets

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 23f57406b82de51809d5812afd96f210f8b627f3 upstream.

ip_select_ident_segs() has been very conservative about using
the connected socket private generator only for packets with IP_DF
set, claiming it was needed for some VJ compression implementations.

As mentioned in this referenced document, this can be abused.
(Ref: Off-Path TCP Exploits of the Mixed IPID Assignment)

Before switching to pure random IPID generation and possibly hurt
some workloads, lets use the private inet socket generator.

Not only this will remove one vulnerability, this will also
improve performance of TCP flows using pmtudisc==IP_PMTUDISC_DONT

Fixes: 73f156a6e8c1 ("inetpeer: get rid of ip_id_count")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reported-by: Ray Che <xijiache@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip.h |   21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -377,19 +377,18 @@ static inline void ip_select_ident_segs(
 {
 	struct iphdr *iph = ip_hdr(skb);
 
+	/* We had many attacks based on IPID, use the private
+	 * generator as much as we can.
+	 */
+	if (sk && inet_sk(sk)->inet_daddr) {
+		iph->id = htons(inet_sk(sk)->inet_id);
+		inet_sk(sk)->inet_id += segs;
+		return;
+	}
 	if ((iph->frag_off & htons(IP_DF)) && !skb->ignore_df) {
-		/* This is only to work around buggy Windows95/2000
-		 * VJ compression implementations.  If the ID field
-		 * does not change, they drop every other packet in
-		 * a TCP stream using header compression.
-		 */
-		if (sk && inet_sk(sk)->inet_daddr) {
-			iph->id = htons(inet_sk(sk)->inet_id);
-			inet_sk(sk)->inet_id += segs;
-		} else {
-			iph->id = 0;
-		}
+		iph->id = 0;
 	} else {
+		/* Unfortunately we need the big hammer to get a suitable IPID */
 		__ip_select_ident(net, iph, segs);
 	}
 }

[PATCH 4.9 19/48] NFSv4: Handle case where the lookup of a directory fails

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit ac795161c93699d600db16c1a8cc23a65a1eceaf upstream.

If the application sets the O_DIRECTORY flag, and tries to open a
regular file, nfs_atomic_open() will punt to doing a regular lookup.
If the server then returns a regular file, we will happily return a
file descriptor with uninitialised open state.

The fix is to return the expected ENOTDIR error in these cases.

Reported-by: Lyu Tao <tao.lyu@epfl.ch>
Fixes: 0dd2b474d0b6 ("nfs: implement i_op->atomic_open()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/dir.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1602,6 +1602,19 @@ out:
 
 no_open:
 	res = nfs_lookup(dir, dentry, lookup_flags);
+	if (!res) {
+		inode = d_inode(dentry);
+		if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
+		    !S_ISDIR(inode->i_mode))
+			res = ERR_PTR(-ENOTDIR);
+	} else if (!IS_ERR(res)) {
+		inode = d_inode(res);
+		if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
+		    !S_ISDIR(inode->i_mode)) {
+			dput(res);
+			res = ERR_PTR(-ENOTDIR);
+		}
+	}
 	if (switched) {
 		d_lookup_done(dentry);
 		if (!res)

[PATCH 4.9 20/48] NFSv4: nfs_atomic_open() can race when looking up a non-regular file

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit 1751fc1db36f6f411709e143d5393f92d12137a9 upstream.

If the file type changes back to being a regular file on the server
between the failed OPEN and our LOOKUP, then we need to re-run the OPEN.

Fixes: 0dd2b474d0b6 ("nfs: implement i_op->atomic_open()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/dir.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1607,12 +1607,17 @@ no_open:
 		if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
 		    !S_ISDIR(inode->i_mode))
 			res = ERR_PTR(-ENOTDIR);
+		else if (inode && S_ISREG(inode->i_mode))
+			res = ERR_PTR(-EOPENSTALE);
 	} else if (!IS_ERR(res)) {
 		inode = d_inode(res);
 		if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
 		    !S_ISDIR(inode->i_mode)) {
 			dput(res);
 			res = ERR_PTR(-ENOTDIR);
+		} else if (inode && S_ISREG(inode->i_mode)) {
+			dput(res);
+			res = ERR_PTR(-EOPENSTALE);
 		}
 	}
 	if (switched) {

[PATCH 4.9 21/48] net-procfs: show net devices bound packet types

[Greg Kroah-Hartman]

From: Jianguo Wu <wujianguo@chinatelecom.cn>

commit 1d10f8a1f40b965d449e8f2d5ed7b96a7c138b77 upstream.

After commit:7866a621043f ("dev: add per net_device packet type chains"),
we can not get packet types that are bound to a specified net device by
/proc/net/ptype, this patch fix the regression.

Run "tcpdump -i ens192 udp -nns0" Before and after apply this patch:

Before:
  [root@localhost ~]# cat /proc/net/ptype
  Type Device      Function
  0800          ip_rcv
  0806          arp_rcv
  86dd          ipv6_rcv

After:
  [root@localhost ~]# cat /proc/net/ptype
  Type Device      Function
  ALL  ens192   tpacket_rcv
  0800          ip_rcv
  0806          arp_rcv
  86dd          ipv6_rcv

v1 -> v2:
  - fix the regression rather than adding new /proc API as
    suggested by Stephen Hemminger.

Fixes: 7866a621043f ("dev: add per net_device packet type chains")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net-procfs.c |   35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)

--- a/net/core/net-procfs.c
+++ b/net/core/net-procfs.c
@@ -208,12 +208,23 @@ static const struct file_operations soft
 	.release = seq_release,
 };
 
-static void *ptype_get_idx(loff_t pos)
+static void *ptype_get_idx(struct seq_file *seq, loff_t pos)
 {
+	struct list_head *ptype_list = NULL;
 	struct packet_type *pt = NULL;
+	struct net_device *dev;
 	loff_t i = 0;
 	int t;
 
+	for_each_netdev_rcu(seq_file_net(seq), dev) {
+		ptype_list = &dev->ptype_all;
+		list_for_each_entry_rcu(pt, ptype_list, list) {
+			if (i == pos)
+				return pt;
+			++i;
+		}
+	}
+
 	list_for_each_entry_rcu(pt, &ptype_all, list) {
 		if (i == pos)
 			return pt;
@@ -234,22 +245,40 @@ static void *ptype_seq_start(struct seq_
 	__acquires(RCU)
 {
 	rcu_read_lock();
-	return *pos ? ptype_get_idx(*pos - 1) : SEQ_START_TOKEN;
+	return *pos ? ptype_get_idx(seq, *pos - 1) : SEQ_START_TOKEN;
 }
 
 static void *ptype_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
+	struct net_device *dev;
 	struct packet_type *pt;
 	struct list_head *nxt;
 	int hash;
 
 	++*pos;
 	if (v == SEQ_START_TOKEN)
-		return ptype_get_idx(0);
+		return ptype_get_idx(seq, 0);
 
 	pt = v;
 	nxt = pt->list.next;
+	if (pt->dev) {
+		if (nxt != &pt->dev->ptype_all)
+			goto found;
+
+		dev = pt->dev;
+		for_each_netdev_continue_rcu(seq_file_net(seq), dev) {
+			if (!list_empty(&dev->ptype_all)) {
+				nxt = dev->ptype_all.next;
+				goto found;
+			}
+		}
+
+		nxt = ptype_all.next;
+		goto ptype_all;
+	}
+
 	if (pt->type == htons(ETH_P_ALL)) {
+ptype_all:
 		if (nxt != &ptype_all)
 			goto found;
 		hash = 0;

[PATCH 4.9 22/48] drm/msm: Fix wrong size calculation

[Greg Kroah-Hartman]

From: Xianting Tian <xianting.tian@linux.alibaba.com>

commit 0a727b459ee39bd4c5ced19d6024258ac87b6b2e upstream.

For example, memory-region in .dts as below,
	reg = <0x0 0x50000000 0x0 0x20000000>

We can get below values,
struct resource r;
r.start = 0x50000000;
r.end	= 0x6fffffff;

So the size should be:
size = r.end - r.start + 1 = 0x20000000

Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Fixes: 072f1f9168ed ("drm/msm: add support for "stolen" mem")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220112123334.749776-1-xianting.tian@linux.alibaba.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_drv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -297,7 +297,7 @@ static int msm_init_vram(struct drm_devi
 		of_node_put(node);
 		if (ret)
 			return ret;
-		size = r.end - r.start;
+		size = r.end - r.start + 1;
 		DRM_INFO("using VRAM carveout: %lx@%pa\n", size, &r.start);
 
 		/* if we have no IOMMU, then we need to use carveout allocator.

[PATCH 4.9 23/48] hwmon: (lm90) Reduce maximum conversion rate for G781

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit a66c5ed539277b9f2363bbace0dba88b85b36c26 ]

According to its datasheet, G781 supports a maximum conversion rate value
of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only
support a maximum conversion rate value of 7 (125 ms). On the other side,
chips labeled G781-1 and G784 were found to support a conversion rate value
of 8. There is no known means to distinguish G780 from G781 or G784; all
chips report the same manufacturer ID and chip revision.
Setting the conversion rate register value to 8 on chips not supporting
it causes unexpected behavior since the real conversion rate is set to 0
(16 seconds) if a value of 8 is written into the conversion rate register.
Limit the conversion rate register value to 7 for all G78x chips to avoid
the problem.

Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/lm90.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 1e9f029a328a6..d899ae5470fa2 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -265,7 +265,7 @@ static const struct lm90_params lm90_params[] = {
 		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
 		  | LM90_HAVE_BROKEN_ALERT,
 		.alert_alarms = 0x7c,
-		.max_convrate = 8,
+		.max_convrate = 7,
 	},
 	[lm86] = {
 		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
-- 
2.34.1

[PATCH 4.9 24/48] ipv4: raw: lock the socket in raw_bind()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 153a0d187e767c68733b8e9f46218eb1f41ab902 ]

For some reason, raw_bind() forgot to lock the socket.

BUG: KCSAN: data-race in __ip4_datagram_connect / raw_bind

write to 0xffff8881170d4308 of 4 bytes by task 5466 on cpu 0:
 raw_bind+0x1b0/0x250 net/ipv4/raw.c:739
 inet_bind+0x56/0xa0 net/ipv4/af_inet.c:443
 __sys_bind+0x14b/0x1b0 net/socket.c:1697
 __do_sys_bind net/socket.c:1708 [inline]
 __se_sys_bind net/socket.c:1706 [inline]
 __x64_sys_bind+0x3d/0x50 net/socket.c:1706
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff8881170d4308 of 4 bytes by task 5468 on cpu 1:
 __ip4_datagram_connect+0xb7/0x7b0 net/ipv4/datagram.c:39
 ip4_datagram_connect+0x2a/0x40 net/ipv4/datagram.c:89
 inet_dgram_connect+0x107/0x190 net/ipv4/af_inet.c:576
 __sys_connect_file net/socket.c:1900 [inline]
 __sys_connect+0x197/0x1b0 net/socket.c:1917
 __do_sys_connect net/socket.c:1927 [inline]
 __se_sys_connect net/socket.c:1924 [inline]
 __x64_sys_connect+0x3d/0x50 net/socket.c:1924
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000000 -> 0x0003007f

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 5468 Comm: syz-executor.5 Not tainted 5.17.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/raw.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index af75c0a8238ef..88ad1b6b38029 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -706,6 +706,7 @@ static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 	int ret = -EINVAL;
 	int chk_addr_ret;
 
+	lock_sock(sk);
 	if (sk->sk_state != TCP_CLOSE || addr_len < sizeof(struct sockaddr_in))
 		goto out;
 	chk_addr_ret = inet_addr_type(sock_net(sk), addr->sin_addr.s_addr);
@@ -718,7 +719,9 @@ static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 		inet->inet_saddr = 0;  /* Use device */
 	sk_dst_reset(sk);
 	ret = 0;
-out:	return ret;
+out:
+	release_sock(sk);
+	return ret;
 }
 
 /*
-- 
2.34.1

[PATCH 4.9 25/48] ipv4: tcp: send zero IPID in SYNACK messages

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 970a5a3ea86da637471d3cd04d513a0755aba4bf ]

In commit 431280eebed9 ("ipv4: tcp: send zero IPID for RST and
ACK sent in SYN-RECV and TIME-WAIT state") we took care of some
ctl packets sent by TCP.

It turns out we need to use a similar strategy for SYNACK packets.

By default, they carry IP_DF and IPID==0, but there are ways
to ask them to use the hashed IP ident generator and thus
be used to build off-path attacks.
(Ref: Off-Path TCP Exploits of the Mixed IPID Assignment)

One of this way is to force (before listener is started)
echo 1 >/proc/sys/net/ipv4/ip_no_pmtu_disc

Another way is using forged ICMP ICMP_FRAG_NEEDED
with a very small MTU (like 68) to force a false return from
ip_dont_fragment()

In this patch, ip_build_and_send_pkt() uses the following
heuristics.

1) Most SYNACK packets are smaller than IPV4_MIN_MTU and therefore
can use IP_DF regardless of the listener or route pmtu setting.

2) In case the SYNACK packet is bigger than IPV4_MIN_MTU,
we use prandom_u32() generator instead of the IPv4 hashed ident one.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Ray Che <xijiache@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Geoff Alexander <alexandg@cs.unm.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_output.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -159,12 +159,19 @@ int ip_build_and_send_pkt(struct sk_buff
 	iph->daddr    = (opt && opt->opt.srr ? opt->opt.faddr : daddr);
 	iph->saddr    = saddr;
 	iph->protocol = sk->sk_protocol;
-	if (ip_dont_fragment(sk, &rt->dst)) {
+	/* Do not bother generating IPID for small packets (eg SYNACK) */
+	if (skb->len <= IPV4_MIN_MTU || ip_dont_fragment(sk, &rt->dst)) {
 		iph->frag_off = htons(IP_DF);
 		iph->id = 0;
 	} else {
 		iph->frag_off = 0;
-		__ip_select_ident(net, iph, 1);
+		/* TCP packets here are SYNACK with fat IPv4/TCP options.
+		 * Avoid using the hashed IP ident generator.
+		 */
+		if (sk->sk_protocol == IPPROTO_TCP)
+			iph->id = (__force __be16)prandom_u32();
+		else
+			__ip_select_ident(net, iph, 1);
 	}
 
 	if (opt && opt->opt.optlen) {

[PATCH 4.9 26/48] netfilter: nat: remove l4 protocol port rovers

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit 6ed5943f8735e2b778d92ea4d9805c0a1d89bc2b upstream.

This is a leftover from days where single-cpu systems were common:
Store last port used to resolve a clash to use it as a starting point when
the next conflict needs to be resolved.

When we have parallel attempt to connect to same address:port pair,
its likely that both cores end up computing the same "available" port,
as both use same starting port, and newly used ports won't become
visible to other cores until the conntrack gets confirmed later.

One of the cores then has to drop the packet at insertion time because
the chosen new tuple turns out to be in use after all.

Lets simplify this: remove port rover and use a pseudo-random starting
point.

Note that this doesn't make netfilter default to 'fully random' mode;
the 'rover' was only used if NAT could not reuse source port as-is.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/netfilter/nf_nat_l4proto.h |    2 +-
 net/netfilter/nf_nat_proto_common.c    |    7 ++-----
 net/netfilter/nf_nat_proto_dccp.c      |    5 +----
 net/netfilter/nf_nat_proto_sctp.c      |    5 +----
 net/netfilter/nf_nat_proto_tcp.c       |    5 +----
 net/netfilter/nf_nat_proto_udp.c       |    5 +----
 net/netfilter/nf_nat_proto_udplite.c   |    5 +----
 7 files changed, 8 insertions(+), 26 deletions(-)

--- a/include/net/netfilter/nf_nat_l4proto.h
+++ b/include/net/netfilter/nf_nat_l4proto.h
@@ -64,7 +64,7 @@ void nf_nat_l4proto_unique_tuple(const s
 				 struct nf_conntrack_tuple *tuple,
 				 const struct nf_nat_range *range,
 				 enum nf_nat_manip_type maniptype,
-				 const struct nf_conn *ct, u16 *rover);
+				 const struct nf_conn *ct);
 
 int nf_nat_l4proto_nlattr_to_range(struct nlattr *tb[],
 				   struct nf_nat_range *range);
--- a/net/netfilter/nf_nat_proto_common.c
+++ b/net/netfilter/nf_nat_proto_common.c
@@ -38,8 +38,7 @@ void nf_nat_l4proto_unique_tuple(const s
 				 struct nf_conntrack_tuple *tuple,
 				 const struct nf_nat_range *range,
 				 enum nf_nat_manip_type maniptype,
-				 const struct nf_conn *ct,
-				 u16 *rover)
+				 const struct nf_conn *ct)
 {
 	unsigned int range_size, min, max, i;
 	__be16 *portptr;
@@ -84,15 +83,13 @@ void nf_nat_l4proto_unique_tuple(const s
 	} else if (range->flags & NF_NAT_RANGE_PROTO_RANDOM_FULLY) {
 		off = prandom_u32();
 	} else {
-		off = *rover;
+		off = prandom_u32();
 	}
 
 	for (i = 0; ; ++off) {
 		*portptr = htons(min + off % range_size);
 		if (++i != range_size && nf_nat_used_tuple(tuple, ct))
 			continue;
-		if (!(range->flags & NF_NAT_RANGE_PROTO_RANDOM_ALL))
-			*rover = off;
 		return;
 	}
 }
--- a/net/netfilter/nf_nat_proto_dccp.c
+++ b/net/netfilter/nf_nat_proto_dccp.c
@@ -20,8 +20,6 @@
 #include <net/netfilter/nf_nat_l3proto.h>
 #include <net/netfilter/nf_nat_l4proto.h>
 
-static u_int16_t dccp_port_rover;
-
 static void
 dccp_unique_tuple(const struct nf_nat_l3proto *l3proto,
 		  struct nf_conntrack_tuple *tuple,
@@ -29,8 +27,7 @@ dccp_unique_tuple(const struct nf_nat_l3
 		  enum nf_nat_manip_type maniptype,
 		  const struct nf_conn *ct)
 {
-	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct,
-				    &dccp_port_rover);
+	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct);
 }
 
 static bool
--- a/net/netfilter/nf_nat_proto_sctp.c
+++ b/net/netfilter/nf_nat_proto_sctp.c
@@ -14,8 +14,6 @@
 
 #include <net/netfilter/nf_nat_l4proto.h>
 
-static u_int16_t nf_sctp_port_rover;
-
 static void
 sctp_unique_tuple(const struct nf_nat_l3proto *l3proto,
 		  struct nf_conntrack_tuple *tuple,
@@ -23,8 +21,7 @@ sctp_unique_tuple(const struct nf_nat_l3
 		  enum nf_nat_manip_type maniptype,
 		  const struct nf_conn *ct)
 {
-	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct,
-				    &nf_sctp_port_rover);
+	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct);
 }
 
 static bool
--- a/net/netfilter/nf_nat_proto_tcp.c
+++ b/net/netfilter/nf_nat_proto_tcp.c
@@ -18,8 +18,6 @@
 #include <net/netfilter/nf_nat_l4proto.h>
 #include <net/netfilter/nf_nat_core.h>
 
-static u16 tcp_port_rover;
-
 static void
 tcp_unique_tuple(const struct nf_nat_l3proto *l3proto,
 		 struct nf_conntrack_tuple *tuple,
@@ -27,8 +25,7 @@ tcp_unique_tuple(const struct nf_nat_l3p
 		 enum nf_nat_manip_type maniptype,
 		 const struct nf_conn *ct)
 {
-	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct,
-				    &tcp_port_rover);
+	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct);
 }
 
 static bool
--- a/net/netfilter/nf_nat_proto_udp.c
+++ b/net/netfilter/nf_nat_proto_udp.c
@@ -17,8 +17,6 @@
 #include <net/netfilter/nf_nat_l3proto.h>
 #include <net/netfilter/nf_nat_l4proto.h>
 
-static u16 udp_port_rover;
-
 static void
 udp_unique_tuple(const struct nf_nat_l3proto *l3proto,
 		 struct nf_conntrack_tuple *tuple,
@@ -26,8 +24,7 @@ udp_unique_tuple(const struct nf_nat_l3p
 		 enum nf_nat_manip_type maniptype,
 		 const struct nf_conn *ct)
 {
-	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct,
-				    &udp_port_rover);
+	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct);
 }
 
 static bool
--- a/net/netfilter/nf_nat_proto_udplite.c
+++ b/net/netfilter/nf_nat_proto_udplite.c
@@ -17,8 +17,6 @@
 #include <net/netfilter/nf_nat_l3proto.h>
 #include <net/netfilter/nf_nat_l4proto.h>
 
-static u16 udplite_port_rover;
-
 static void
 udplite_unique_tuple(const struct nf_nat_l3proto *l3proto,
 		     struct nf_conntrack_tuple *tuple,
@@ -26,8 +24,7 @@ udplite_unique_tuple(const struct nf_nat
 		     enum nf_nat_manip_type maniptype,
 		     const struct nf_conn *ct)
 {
-	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct,
-				    &udplite_port_rover);
+	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct);
 }
 
 static bool

[PATCH 4.9 27/48] netfilter: nat: limit port clash resolution attempts

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit a504b703bb1da526a01593da0e4be2af9d9f5fa8 upstream.

In case almost or all available ports are taken, clash resolution can
take a very long time, resulting in soft lockup.

This can happen when many to-be-natted hosts connect to same
destination:port (e.g. a proxy) and all connections pass the same SNAT.

Pick a random offset in the acceptable range, then try ever smaller
number of adjacent port numbers, until either the limit is reached or a
useable port was found.  This results in at most 248 attempts
(128 + 64 + 32 + 16 + 8, i.e. 4 restarts with new search offset)
instead of 64000+,

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nf_nat_proto_common.c |   29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

--- a/net/netfilter/nf_nat_proto_common.c
+++ b/net/netfilter/nf_nat_proto_common.c
@@ -40,9 +40,10 @@ void nf_nat_l4proto_unique_tuple(const s
 				 enum nf_nat_manip_type maniptype,
 				 const struct nf_conn *ct)
 {
-	unsigned int range_size, min, max, i;
+	unsigned int range_size, min, max, i, attempts;
 	__be16 *portptr;
-	u_int16_t off;
+	u16 off;
+	static const unsigned int max_attempts = 128;
 
 	if (maniptype == NF_NAT_MANIP_SRC)
 		portptr = &tuple->src.u.all;
@@ -86,12 +87,28 @@ void nf_nat_l4proto_unique_tuple(const s
 		off = prandom_u32();
 	}
 
-	for (i = 0; ; ++off) {
+	attempts = range_size;
+	if (attempts > max_attempts)
+		attempts = max_attempts;
+
+	/* We are in softirq; doing a search of the entire range risks
+	 * soft lockup when all tuples are already used.
+	 *
+	 * If we can't find any free port from first offset, pick a new
+	 * one and try again, with ever smaller search window.
+	 */
+another_round:
+	for (i = 0; i < attempts; i++, off++) {
 		*portptr = htons(min + off % range_size);
-		if (++i != range_size && nf_nat_used_tuple(tuple, ct))
-			continue;
-		return;
+		if (!nf_nat_used_tuple(tuple, ct))
+			return;
 	}
+
+	if (attempts >= range_size || attempts < 16)
+		return;
+	attempts /= 2;
+	off = prandom_u32();
+	goto another_round;
 }
 EXPORT_SYMBOL_GPL(nf_nat_l4proto_unique_tuple);
 

[PATCH 4.9 28/48] ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

[Greg Kroah-Hartman]

From: Georgi Valkov <gvalkov@abv.bg>

commit 63e4b45c82ed1bde979da7052229a4229ce9cabf upstream.

When rx_buf is allocated we need to account for IPHETH_IP_ALIGN,
which reduces the usable size by 2 bytes. Otherwise we have 1512
bytes usable instead of 1514, and if we receive more than 1512
bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW,
after which the driver malfunctiones and all communication stops.

Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75

Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14")
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/
Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/ipheth.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -173,7 +173,7 @@ static int ipheth_alloc_urbs(struct iphe
 	if (tx_buf == NULL)
 		goto free_rx_urb;
 
-	rx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE,
+	rx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN,
 				    GFP_KERNEL, &rx_urb->transfer_dma);
 	if (rx_buf == NULL)
 		goto free_tx_buf;
@@ -198,7 +198,7 @@ error_nomem:
 
 static void ipheth_free_urbs(struct ipheth_device *iphone)
 {
-	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->rx_buf,
+	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN, iphone->rx_buf,
 			  iphone->rx_urb->transfer_dma);
 	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->tx_buf,
 			  iphone->tx_urb->transfer_dma);
@@ -371,7 +371,7 @@ static int ipheth_rx_submit(struct iphet
 
 	usb_fill_bulk_urb(dev->rx_urb, udev,
 			  usb_rcvbulkpipe(udev, dev->bulk_in),
-			  dev->rx_buf, IPHETH_BUF_SIZE,
+			  dev->rx_buf, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN,
 			  ipheth_rcvbulk_callback,
 			  dev);
 	dev->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

[PATCH 4.9 29/48] net: amd-xgbe: ensure to reset the tx_timer_active flag

[Greg Kroah-Hartman]

From: Raju Rangoju <Raju.Rangoju@amd.com>

commit 7674b7b559b683478c3832527c59bceb169e701d upstream.

Ensure to reset the tx_timer_active flag in xgbe_stop(),
otherwise a port restart may result in tx timeout due to
uncleared flag.

Fixes: c635eaacbf77 ("amd-xgbe: Remove Tx coalescing")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -494,7 +494,9 @@ static void xgbe_stop_timers(struct xgbe
 		if (!channel->tx_ring)
 			break;
 
+		/* Deactivate the Tx timer */
 		del_timer_sync(&channel->tx_timer);
+		channel->tx_timer_active = 0;
 	}
 }
 

[PATCH 4.9 30/48] net: amd-xgbe: Fix skb data length underflow

[Greg Kroah-Hartman]

From: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>

commit 5aac9108a180fc06e28d4e7fb00247ce603b72ee upstream.

There will be BUG_ON() triggered in include/linux/skbuff.h leading to
intermittent kernel panic, when the skb length underflow is detected.

Fix this by dropping the packet if such length underflows are seen
because of inconsistencies in the hardware descriptors.

Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware")
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -1968,6 +1968,14 @@ read_again:
 			buf2_len = xgbe_rx_buf2_len(rdata, packet, len);
 			len += buf2_len;
 
+			if (buf2_len > rdata->rx.buf.dma_len) {
+				/* Hardware inconsistency within the descriptors
+				 * that has resulted in a length underflow.
+				 */
+				error = 1;
+				goto skip_data;
+			}
+
 			if (!skb) {
 				skb = xgbe_create_skb(pdata, napi, rdata,
 						      buf1_len);
@@ -1997,8 +2005,10 @@ skip_data:
 		if (!last || context_next)
 			goto read_again;
 
-		if (!skb)
+		if (!skb || error) {
+			dev_kfree_skb(skb);
 			goto next_packet;
+		}
 
 		/* Be sure we don't exceed the configured MTU */
 		max_len = netdev->mtu + ETH_HLEN;

[PATCH 4.9 31/48] rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit c6f6f2444bdbe0079e41914a35081530d0409963 upstream.

While looking at one unrelated syzbot bug, I found the replay logic
in __rtnl_newlink() to potentially trigger use-after-free.

It is better to clear master_dev and m_ops inside the loop,
in case we have to replay it.

Fixes: ba7d49b1f0f8 ("rtnetlink: provide api for getting and setting slave info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20220201012106.216495-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/rtnetlink.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2454,9 +2454,9 @@ static int rtnl_newlink(struct sk_buff *
 {
 	struct net *net = sock_net(skb->sk);
 	const struct rtnl_link_ops *ops;
-	const struct rtnl_link_ops *m_ops = NULL;
+	const struct rtnl_link_ops *m_ops;
 	struct net_device *dev;
-	struct net_device *master_dev = NULL;
+	struct net_device *master_dev;
 	struct ifinfomsg *ifm;
 	char kind[MODULE_NAME_LEN];
 	char ifname[IFNAMSIZ];
@@ -2487,6 +2487,8 @@ replay:
 			dev = NULL;
 	}
 
+	master_dev = NULL;
+	m_ops = NULL;
 	if (dev) {
 		master_dev = netdev_master_upper_dev_get(dev);
 		if (master_dev)

[PATCH 4.9 32/48] af_packet: fix data-race in packet_setsockopt / packet_setsockopt

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit e42e70ad6ae2ae511a6143d2e8da929366e58bd9 upstream.

When packet_setsockopt( PACKET_FANOUT_DATA ) reads po->fanout,
no lock is held, meaning that another thread can change po->fanout.

Given that po->fanout can only be set once during the socket lifetime
(it is only cleared from fanout_release()), we can use
READ_ONCE()/WRITE_ONCE() to document the race.

BUG: KCSAN: data-race in packet_setsockopt / packet_setsockopt

write to 0xffff88813ae8e300 of 8 bytes by task 14653 on cpu 0:
 fanout_add net/packet/af_packet.c:1791 [inline]
 packet_setsockopt+0x22fe/0x24a0 net/packet/af_packet.c:3931
 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88813ae8e300 of 8 bytes by task 14654 on cpu 1:
 packet_setsockopt+0x691/0x24a0 net/packet/af_packet.c:3935
 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000000000000000 -> 0xffff888106f8c000

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 14654 Comm: syz-executor.3 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 47dceb8ecdc1 ("packet: add classic BPF fanout mode")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220201022358.330621-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/packet/af_packet.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1719,7 +1719,10 @@ static int fanout_add(struct sock *sk, u
 		err = -ENOSPC;
 		if (atomic_read(&match->sk_ref) < PACKET_FANOUT_MAX) {
 			__dev_remove_pack(&po->prot_hook);
-			po->fanout = match;
+
+			/* Paired with packet_setsockopt(PACKET_FANOUT_DATA) */
+			WRITE_ONCE(po->fanout, match);
+
 			po->rollover = rollover;
 			rollover = NULL;
 			atomic_inc(&match->sk_ref);
@@ -3895,7 +3898,8 @@ packet_setsockopt(struct socket *sock, i
 	}
 	case PACKET_FANOUT_DATA:
 	{
-		if (!po->fanout)
+		/* Paired with the WRITE_ONCE() in fanout_add() */
+		if (!READ_ONCE(po->fanout))
 			return -EINVAL;
 
 		return fanout_set_data(po, optval, optlen);

[PATCH 4.9 33/48] ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 817f7c9335ec01e0f5e8caffc4f1dcd5e458a4c0 upstream.

We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -327,13 +327,27 @@ int snd_soc_put_volsw(struct snd_kcontro
 	if (sign_bit)
 		mask = BIT(sign_bit + 1) - 1;
 
-	val = ((ucontrol->value.integer.value[0] + min) & mask);
+	val = ucontrol->value.integer.value[0];
+	if (mc->platform_max && val > mc->platform_max)
+		return -EINVAL;
+	if (val > max - min)
+		return -EINVAL;
+	if (val < 0)
+		return -EINVAL;
+	val = (val + min) & mask;
 	if (invert)
 		val = max - val;
 	val_mask = mask << shift;
 	val = val << shift;
 	if (snd_soc_volsw_is_stereo(mc)) {
-		val2 = ((ucontrol->value.integer.value[1] + min) & mask);
+		val2 = ucontrol->value.integer.value[1];
+		if (mc->platform_max && val2 > mc->platform_max)
+			return -EINVAL;
+		if (val2 > max - min)
+			return -EINVAL;
+		if (val2 < 0)
+			return -EINVAL;
+		val2 = (val2 + min) & mask;
 		if (invert)
 			val2 = max - val2;
 		if (reg == reg2) {

[PATCH 4.9 34/48] ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 4f1e50d6a9cf9c1b8c859d449b5031cacfa8404e upstream.

We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -441,8 +441,15 @@ int snd_soc_put_volsw_sx(struct snd_kcon
 	int err = 0;
 	unsigned int val, val_mask, val2 = 0;
 
+	val = ucontrol->value.integer.value[0];
+	if (mc->platform_max && val > mc->platform_max)
+		return -EINVAL;
+	if (val > max - min)
+		return -EINVAL;
+	if (val < 0)
+		return -EINVAL;
 	val_mask = mask << shift;
-	val = (ucontrol->value.integer.value[0] + min) & mask;
+	val = (val + min) & mask;
 	val = val << shift;
 
 	err = snd_soc_component_update_bits(component, reg, val_mask, val);

Re: [PATCH 4.9 34/48] ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1881 bytes --]

Hi!

> commit 4f1e50d6a9cf9c1b8c859d449b5031cacfa8404e upstream.
> 
> We don't currently validate that the values being set are within the range
> we advertised to userspace as being valid, do so and reject any values
> that are out of range.

We are getting reports that this commit breaks audio on some
phones... and indeed it looks like "+ min" is missing in first condition:

https://github.com/baunilla/android_kernel_xiaomi_rosy/commit/969b9d366c1e9564e173aea325ec544dcd7804ff

	val = ucontrol->value.integer.value[0];
-	if (mc->platform_max && val > mc->platform_max)
+	if (mc->platform_max && ((int)val + min) > mc->platform_max)
		return -EINVAL;

What needs to be done to get this fixed?

Best regards,
								Pavel

Reported-by: <theflamefire89@gmail.com>

> Signed-off-by: Mark Brown <broonie@kernel.org>
> Cc: stable@vger.kernel.org
> Link: https://lore.kernel.org/r/20220124153253.3548853-3-broonie@kernel.org
> Signed-off-by: Mark Brown <broonie@kernel.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  sound/soc/soc-ops.c |    9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> --- a/sound/soc/soc-ops.c
> +++ b/sound/soc/soc-ops.c
> @@ -441,8 +441,15 @@ int snd_soc_put_volsw_sx(struct snd_kcon
>  	int err = 0;
>  	unsigned int val, val_mask, val2 = 0;
>  
> +	val = ucontrol->value.integer.value[0];
> +	if (mc->platform_max && val > mc->platform_max)
> +		return -EINVAL;
> +	if (val > max - min)
> +		return -EINVAL;
> +	if (val < 0)
> +		return -EINVAL;
>  	val_mask = mask << shift;
> -	val = (ucontrol->value.integer.value[0] + min) & mask;
> +	val = (val + min) & mask;
>  	val = val << shift;
>  
>  	err = snd_soc_component_update_bits(component, reg, val_mask, val);
> 

-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.9 34/48] ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 912 bytes --]

On Fri, Jun 03, 2022 at 12:06:13PM +0200, Pavel Machek wrote:

> We are getting reports that this commit breaks audio on some
> phones... and indeed it looks like "+ min" is missing in first condition:

> https://github.com/baunilla/android_kernel_xiaomi_rosy/commit/969b9d366c1e9564e173aea325ec544dcd7804ff

> 	val = ucontrol->value.integer.value[0];
> -	if (mc->platform_max && val > mc->platform_max)
> +	if (mc->platform_max && ((int)val + min) > mc->platform_max)
> 		return -EINVAL;

> What needs to be done to get this fixed?

The downstream kernel platform_max configuration should really be
using the user visible value, not a direct register value.  Note
that some of the Qualcomm vendor trees have modifictions to the
semantics of some of the controls which cause issues, and partly
due to this confusion there should be some fixes for their
upstream drivers coming soon.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 4.9 34/48] ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1413 bytes --]

On Fri, Jun 03, 2022 at 12:28:09PM +0200, Mark Brown wrote:
> On Fri, Jun 03, 2022 at 12:06:13PM +0200, Pavel Machek wrote:
> 
> > We are getting reports that this commit breaks audio on some
> > phones... and indeed it looks like "+ min" is missing in first condition:
> 
> > https://github.com/baunilla/android_kernel_xiaomi_rosy/commit/969b9d366c1e9564e173aea325ec544dcd7804ff
> 
> > 	val = ucontrol->value.integer.value[0];
> > -	if (mc->platform_max && val > mc->platform_max)
> > +	if (mc->platform_max && ((int)val + min) > mc->platform_max)
> > 		return -EINVAL;
> 
> > What needs to be done to get this fixed?
> 
> The downstream kernel platform_max configuration should really be
> using the user visible value, not a direct register value.  Note
> that some of the Qualcomm vendor trees have modifictions to the
> semantics of some of the controls which cause issues, and partly
> due to this confusion there should be some fixes for their
> upstream drivers coming soon.

Actually potentially we want to revert the handling of
platform_max only.  Do we know where these systems are getting
their platform_max values from (a machine driver or sometehing
else?)?  Sadly these controls were not even self consistent so
it's not clear which behaviour to fix, though fortunately it's
all in the areas where the userspaces were out of spec trying to
use the behaviour.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH 4.9 35/48] ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 4cf28e9ae6e2e11a044be1bcbcfa1b0d8675fe4d upstream.

We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -915,6 +915,8 @@ int snd_soc_put_xr_sx(struct snd_kcontro
 	unsigned int i, regval, regmask;
 	int err;
 
+	if (val < mc->min || val > mc->max)
+		return -EINVAL;
 	if (invert)
 		val = max - val;
 	val &= mask;

[PATCH 4.9 36/48] drm/nouveau: fix off by one in BIOS boundary checking

[Greg Kroah-Hartman]

From: Nick Lopez <github@glowingmonkey.org>

commit 1b777d4d9e383d2744fc9b3a09af6ec1893c8b1a upstream.

Bounds checking when parsing init scripts embedded in the BIOS reject
access to the last byte. This causes driver initialization to fail on
Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working
console.

This is probably only seen on OpenFirmware machines like PowerPC Macs
because the BIOS image provided by OF is only the used parts of the ROM,
not a power-of-two blocks read from PCI directly so PCs always have
empty bytes at the end that are never accessed.

Signed-off-by: Nick Lopez <github@glowingmonkey.org>
Fixes: 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c
@@ -38,7 +38,7 @@ nvbios_addr(struct nvkm_bios *bios, u32
 		*addr += bios->imaged_addr;
 	}
 
-	if (unlikely(*addr + size >= bios->size)) {
+	if (unlikely(*addr + size > bios->size)) {
 		nvkm_error(&bios->subdev, "OOB %d %08x %08x\n", size, p, *addr);
 		return false;
 	}

[PATCH 4.9 37/48] iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit 9b45a7738eec52bf0f5d8d3d54e822962781c5f2 upstream.

The polling loop for the register change in iommu_ga_log_enable() needs
to have a udelay() in it.  Otherwise the CPU might be faster than the
IOMMU hardware and wrongly trigger the WARN_ON() further down the code
stream. Use a 10us for udelay(), has there is some hardware where
activation of the GA log can take more than a 100ms.

A future optimization should move the activation check of the GA log
to the point where it gets used for the first time. But that is a
bigger change and not suitable for a fix.

Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220204115537.3894-1-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/amd_iommu_init.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -28,6 +28,7 @@
 #include <linux/amd-iommu.h>
 #include <linux/export.h>
 #include <linux/iommu.h>
+#include <linux/iopoll.h>
 #include <asm/pci-direct.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
@@ -715,6 +716,7 @@ static int iommu_ga_log_enable(struct am
 		status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
 		if (status & (MMIO_STATUS_GALOG_RUN_MASK))
 			break;
+		udelay(10);
 	}
 
 	if (i >= LOOP_TIMEOUT)

[PATCH 4.9 38/48] spi: bcm-qspi: check for valid cs before applying chip select

[Greg Kroah-Hartman]

From: Kamal Dasu <kdasu.kdev@gmail.com>

commit 2cbd27267ffe020af1442b95ec57f59a157ba85c upstream.

Apply only valid chip select value. This change fixes case where chip
select is set to initial value of '-1' during probe and  PM supend and
subsequent resume can try to use the value with undefined behaviour.
Also in case where gpio based chip select, the check in
bcm_qspi_chip_select() shall prevent undefined behaviour on resume.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220127185359.27322-1-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-bcm-qspi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -546,7 +546,7 @@ static void bcm_qspi_chip_select(struct
 	u32 rd = 0;
 	u32 wr = 0;
 
-	if (qspi->base[CHIP_SELECT]) {
+	if (cs >= 0 && qspi->base[CHIP_SELECT]) {
 		rd = bcm_qspi_read(qspi, CHIP_SELECT, 0);
 		wr = (rd & ~0xff) | (1 << cs);
 		if (rd == wr)

[PATCH 4.9 39/48] spi: mediatek: Avoid NULL pointer crash in interrupt

[Greg Kroah-Hartman]

From: Benjamin Gaignard <benjamin.gaignard@collabora.com>

commit f83a96e5f033fbbd21764705cb9c04234b96218e upstream.

In some case, like after a transfer timeout, master->cur_msg pointer
is NULL which led to a kernel crash when trying to use master->cur_msg->spi.
mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter
avoid the problem by setting NULL as second parameter.

Fixes: a568231f46322 ("spi: mediatek: Add spi bus for Mediatek MT8173")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20220131141708.888710-1-benjamin.gaignard@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-mt65xx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -440,7 +440,7 @@ static irqreturn_t mtk_spi_interrupt(int
 	else
 		mdata->state = MTK_SPI_IDLE;
 
-	if (!master->can_dma(master, master->cur_msg->spi, trans)) {
+	if (!master->can_dma(master, NULL, trans)) {
 		if (trans->rx_buf) {
 			cnt = mdata->xfer_len / 4;
 			ioread32_rep(mdata->base + SPI_RX_DATA_REG,

[PATCH 4.9 40/48] net: ieee802154: Return meaningful error codes from the netlink helpers

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 79c37ca73a6e9a33f7b2b7783ba6af07a448c8a9 upstream.

Returning -1 does not indicate anything useful.

Use a standard and meaningful error code instead.

Fixes: a26c5fd7622d ("nl802154: add support for security layer")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ieee802154/nl802154.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1474,7 +1474,7 @@ static int nl802154_send_key(struct sk_b
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
@@ -1665,7 +1665,7 @@ static int nl802154_send_device(struct s
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
@@ -1843,7 +1843,7 @@ static int nl802154_send_devkey(struct s
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
@@ -2020,7 +2020,7 @@ static int nl802154_send_seclevel(struct
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;

[PATCH 4.9 41/48] net: macsec: Verify that send_sci is on when setting Tx sci explicitly

[Greg Kroah-Hartman]

From: Lior Nahmanson <liorna@nvidia.com>

commit d0cfa548dbde354de986911d3913897b5448faad upstream.

When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.

Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/macsec.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -3230,6 +3230,15 @@ static int macsec_newlink(struct net *ne
 
 	macsec->real_dev = real_dev;
 
+	/* send_sci must be set to true when transmit sci explicitly is set */
+	if ((data && data[IFLA_MACSEC_SCI]) &&
+	    (data && data[IFLA_MACSEC_INC_SCI])) {
+		u8 send_sci = !!nla_get_u8(data[IFLA_MACSEC_INC_SCI]);
+
+		if (!send_sci)
+			return -EINVAL;
+	}
+
 	if (data && data[IFLA_MACSEC_ICV_LEN])
 		icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]);
 	mtu = real_dev->mtu - icv_len - macsec_extra_len(true);

[PATCH 4.9 42/48] ASoC: fsl: Add missing error handling in pcm030_fabric_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

commit fb25621da5702c104ce0a48de5b174ced09e5b4e upstream.

Add the missing platform_device_put() and platform_device_del()
before return from pcm030_fabric_probe in the error handling case.

Fixes: c912fa913446 ("ASoC: fsl: register the wm9712-codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220127131336.30214-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/fsl/pcm030-audio-fabric.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/sound/soc/fsl/pcm030-audio-fabric.c
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -90,16 +90,21 @@ static int pcm030_fabric_probe(struct pl
 		dev_err(&op->dev, "platform_device_alloc() failed\n");
 
 	ret = platform_device_add(pdata->codec_device);
-	if (ret)
+	if (ret) {
 		dev_err(&op->dev, "platform_device_add() failed: %d\n", ret);
+		platform_device_put(pdata->codec_device);
+	}
 
 	ret = snd_soc_register_card(card);
-	if (ret)
+	if (ret) {
 		dev_err(&op->dev, "snd_soc_register_card() failed: %d\n", ret);
+		platform_device_del(pdata->codec_device);
+		platform_device_put(pdata->codec_device);
+	}
 
 	platform_set_drvdata(op, pdata);
-
 	return ret;
+
 }
 
 static int pcm030_fabric_remove(struct platform_device *op)

[PATCH 4.9 43/48] scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe

[Greg Kroah-Hartman]

From: John Meneghini <jmeneghi@redhat.com>

commit 936bd03405fc83ba039d42bc93ffd4b88418f1d3 upstream.

Running tests with a debug kernel shows that bnx2fc_recv_frame() is
modifying the per_cpu lport stats counters in a non-mpsafe way.  Just boot
a debug kernel and run the bnx2fc driver with the hardware enabled.

[ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_
[ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G    B
[ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
[ 1391.699183] Call Trace:
[ 1391.699188]  dump_stack_lvl+0x57/0x7d
[ 1391.699198]  check_preemption_disabled+0xc8/0xd0
[ 1391.699205]  bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699215]  ? do_raw_spin_trylock+0xb5/0x180
[ 1391.699221]  ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc]
[ 1391.699229]  ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc]
[ 1391.699240]  bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc]
[ 1391.699250]  ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc]
[ 1391.699258]  kthread+0x364/0x420
[ 1391.699263]  ? _raw_spin_unlock_irq+0x24/0x50
[ 1391.699268]  ? set_kthread_struct+0x100/0x100
[ 1391.699273]  ret_from_fork+0x22/0x30

Restore the old get_cpu/put_cpu code with some modifications to reduce the
size of the critical section.

Link: https://lore.kernel.org/r/20220124145110.442335-1-jmeneghi@redhat.com
Fixes: d576a5e80cd0 ("bnx2fc: Improve stats update mechanism")
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -521,7 +521,8 @@ static int bnx2fc_l2_rcv_thread(void *ar
 
 static void bnx2fc_recv_frame(struct sk_buff *skb)
 {
-	u32 fr_len;
+	u64 crc_err;
+	u32 fr_len, fr_crc;
 	struct fc_lport *lport;
 	struct fcoe_rcv_info *fr;
 	struct fc_stats *stats;
@@ -553,6 +554,11 @@ static void bnx2fc_recv_frame(struct sk_
 	skb_pull(skb, sizeof(struct fcoe_hdr));
 	fr_len = skb->len - sizeof(struct fcoe_crc_eof);
 
+	stats = per_cpu_ptr(lport->stats, get_cpu());
+	stats->RxFrames++;
+	stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
+	put_cpu();
+
 	fp = (struct fc_frame *)skb;
 	fc_frame_init(fp);
 	fr_dev(fp) = lport;
@@ -604,16 +610,15 @@ static void bnx2fc_recv_frame(struct sk_
 		return;
 	}
 
-	stats = per_cpu_ptr(lport->stats, smp_processor_id());
-	stats->RxFrames++;
-	stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
+	fr_crc = le32_to_cpu(fr_crc(fp));
 
-	if (le32_to_cpu(fr_crc(fp)) !=
-			~crc32(~0, skb->data, fr_len)) {
-		if (stats->InvalidCRCCount < 5)
+	if (unlikely(fr_crc != ~crc32(~0, skb->data, fr_len))) {
+		stats = per_cpu_ptr(lport->stats, get_cpu());
+		crc_err = (stats->InvalidCRCCount++);
+		put_cpu();
+		if (crc_err < 5)
 			printk(KERN_WARNING PFX "dropping frame with "
 			       "CRC error\n");
-		stats->InvalidCRCCount++;
 		kfree_skb(skb);
 		return;
 	}

[PATCH 4.9 44/48] nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.

[Greg Kroah-Hartman]

From: Dai Ngo <dai.ngo@oracle.com>

commit ab451ea952fe9d7afefae55ddb28943a148247fe upstream.

>From RFC 7530 Section 16.34.5:

o  The server has not recorded an unconfirmed { v, x, c, *, * } and
   has recorded a confirmed { v, x, c, *, s }.  If the principals of
   the record and of SETCLIENTID_CONFIRM do not match, the server
   returns NFS4ERR_CLID_INUSE without removing any relevant leased
   client state, and without changing recorded callback and
   callback_ident values for client { x }.

The current code intends to do what the spec describes above but
it forgot to set 'old' to NULL resulting to the confirmed client
to be expired.

Fixes: 2b63482185e6 ("nfsd: fix clid_inuse on mount with security change")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/nfs4state.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -3424,8 +3424,10 @@ nfsd4_setclientid_confirm(struct svc_rqs
 			status = nfserr_clid_inuse;
 			if (client_has_state(old)
 					&& !same_creds(&unconf->cl_cred,
-							&old->cl_cred))
+							&old->cl_cred)) {
+				old = NULL;
 				goto out;
+			}
 			status = mark_client_expired_locked(old);
 			if (status) {
 				old = NULL;

[PATCH 4.9 45/48] rtc: cmos: Evaluate century appropriate

[Greg Kroah-Hartman]

From: Riwen Lu <luriwen@kylinos.cn>

commit ff164ae39b82ee483b24579c8e22a13a8ce5bd04 upstream.

There's limiting the year to 2069. When setting the rtc year to 2070,
reading it returns 1970. Evaluate century starting from 19 to count the
correct year.

$ sudo date -s 20700106
Mon 06 Jan 2070 12:00:00 AM CST
$ sudo hwclock -w
$ sudo hwclock -r
1970-01-06 12:00:49.604968+08:00

Fixes: 2a4daadd4d3e5071 ("rtc: cmos: ignore bogus century byte")

Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Acked-by: Eric Wong <e@80x24.org>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220106084609.1223688-1-luriwen@kylinos.cn
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> # preparation for stable
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-mc146818-lib.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/rtc/rtc-mc146818-lib.c
+++ b/drivers/rtc/rtc-mc146818-lib.c
@@ -82,7 +82,7 @@ unsigned int mc146818_get_time(struct rt
 	time->tm_year += real_year - 72;
 #endif
 
-	if (century > 20)
+	if (century > 19)
 		time->tm_year += (century - 19) * 100;
 
 	/*

[PATCH 4.9 46/48] EDAC/altera: Fix deferred probing

[Greg Kroah-Hartman]

From: Sergey Shtylyov <s.shtylyov@omp.ru>

commit 279eb8575fdaa92c314a54c0d583c65e26229107 upstream.

The driver overrides the error codes returned by platform_get_irq() to
-ENODEV for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.

  [ bp: Massage commit message. ]

Fixes: 71bcada88b0f ("edac: altera: Add Altera SDRAM EDAC support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-2-s.shtylyov@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/altera_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -363,7 +363,7 @@ static int altr_sdram_probe(struct platf
 	if (irq < 0) {
 		edac_printk(KERN_ERR, EDAC_MC,
 			    "No irq %d in DT\n", irq);
-		return -ENODEV;
+		return irq;
 	}
 
 	/* Arria10 has a 2nd IRQ */

[PATCH 4.9 47/48] EDAC/xgene: Fix deferred probing

[Greg Kroah-Hartman]

From: Sergey Shtylyov <s.shtylyov@omp.ru>

commit dfd0dfb9a7cc04acf93435b440dd34c2ca7b4424 upstream.

The driver overrides error codes returned by platform_get_irq_optional()
to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.

  [ bp: Massage commit message. ]

Fixes: 0d4429301c4a ("EDAC: Add APM X-Gene SoC EDAC driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-3-s.shtylyov@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/xgene_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/xgene_edac.c
+++ b/drivers/edac/xgene_edac.c
@@ -1936,7 +1936,7 @@ static int xgene_edac_probe(struct platf
 			irq = platform_get_irq(pdev, i);
 			if (irq < 0) {
 				dev_err(&pdev->dev, "No IRQ resource\n");
-				rc = -EINVAL;
+				rc = irq;
 				goto out_err;
 			}
 			rc = devm_request_irq(&pdev->dev, irq,

[PATCH 4.9 48/48] ext4: fix error handling in ext4_restore_inline_data()

[Greg Kroah-Hartman]

From: Ritesh Harjani <riteshh@linux.ibm.com>

commit 897026aaa73eb2517dfea8d147f20ddb0b813044 upstream.

While running "./check -I 200 generic/475" it sometimes gives below
kernel BUG(). Ideally we should not call ext4_write_inline_data() if
ext4_create_inline_data() has failed.

<log snip>
[73131.453234] kernel BUG at fs/ext4/inline.c:223!

<code snip>
 212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
 213                                    void *buffer, loff_t pos, unsigned int len)
 214 {
<...>
 223         BUG_ON(!EXT4_I(inode)->i_inline_off);
 224         BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);

This patch handles the error and prints out a emergency msg saying potential
data loss for the given inode (since we couldn't restore the original
inline_data due to some previous error).

[ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30)

Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inline.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -1123,7 +1123,15 @@ static void ext4_restore_inline_data(han
 				     struct ext4_iloc *iloc,
 				     void *buf, int inline_size)
 {
-	ext4_create_inline_data(handle, inode, inline_size);
+	int ret;
+
+	ret = ext4_create_inline_data(handle, inode, inline_size);
+	if (ret) {
+		ext4_msg(inode->i_sb, KERN_EMERG,
+			"error restoring inline_data for inode -- potential data loss! (inode %lu, error %d)",
+			inode->i_ino, ret);
+		return;
+	}
 	ext4_write_inline_data(inode, iloc, buf, 0, inline_size);
 	ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
 }

Re: [PATCH 4.9 00/48] 4.9.300-rc1 review

[Shuah Khan]

On 2/7/22 4:05 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.300 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.300-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.9 00/48] 4.9.300-rc1 review

[Guenter Roeck]

On Mon, Feb 07, 2022 at 12:05:33PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.300 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 163 pass: 163 fail: 0
Qemu test results:
	total: 397 pass: 397 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.9 00/48] 4.9.300-rc1 review

[Florian Fainelli]

On 2/7/22 3:05 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.300 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.300-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 4.9 00/48] 4.9.300-rc1 review

[Slade Watkins]

On Mon, Feb 7, 2022, at 6:05 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.300 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.

Compiled and booted 4.9.300-rc1 on my x86_64 test system successfully without errors or regressions.

Tested-by: Slade Watkins <slade@sladewatkins.com>

Thanks,
Slade

Re: [PATCH 4.9 00/48] 4.9.300-rc1 review

[Jon Hunter]

On Mon, 07 Feb 2022 12:05:33 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.300 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.300-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version:	4.9.300-rc1-gfa39f098578a
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.9 00/48] 4.9.300-rc1 review

[Naresh Kamboju]

On Mon, 7 Feb 2022 at 16:38, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.300 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.300-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.9.300-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.9.y
* git commit: fa39f098578af99470f3762bca8001c0db1c3335
* git describe: v4.9.299-49-gfa39f098578a
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.299-49-gfa39f098578a

## Test Regressions (compared to v4.9.299-33-g5e40da2b7be3)
No test regressions found.

## Metric Regressions (compared to v4.9.299-33-g5e40da2b7be3)
No metric regressions found.

## Test Fixes (compared to v4.9.299-33-g5e40da2b7be3)
No test fixes found.

## Metric Fixes (compared to v4.9.299-33-g5e40da2b7be3)
No metric fixes found.

## Test result summary
total: 62346, pass: 50123, fail: 394, skip: 10326, xfail: 1503

## Build Summary
* arm: 254 total, 238 passed, 16 failed
* arm64: 32 total, 32 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 31 total, 31 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org