[PATCH 5.10 000/121] 5.10.102-rc1 review

[PATCH 5.10 000/121] 5.10.102-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.10.102 release.
There are 121 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.102-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.10.102-rc1

Cheng Jui Wang <cheng-jui.wang@mediatek.com>
    lockdep: Correct lock_classes index mapping

Rafał Miłecki <rafal@milecki.pl>
    i2c: brcmstb: fix support for DSL and CM variants

Waiman Long <longman@redhat.com>
    copy_process(): Move fd_install() out of sighand->siglock critical section

Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
    i2c: qcom-cci: don't put a device tree node before i2c_add_adapter()

Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
    i2c: qcom-cci: don't delete an unregistered adapter

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_size

Miaoqian Lin <linmq006@gmail.com>
    dmaengine: stm32-dmamux: Fix PM disable depth imbalance in stm32_dmamux_probe

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    dmaengine: sh: rcar-dmac: Check for error num after setting mask

Eric Dumazet <edumazet@google.com>
    net: sched: limit TC_ACT_REPEAT loops

Eliav Farber <farbere@amazon.com>
    EDAC: Fix calculation of returned address and next offset in edac_align_ptr()

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop

Jing Leng <jleng@ambarella.com>
    kconfig: fix failing to generate auto.conf

Marc St-Amand <mstamand@ciena.com>
    net: macb: Align the dma and coherent dma masks

Slark Xiao <slark_xiao@163.com>
    net: usb: qmi_wwan: Add support for Dell DW5829e

JaeSang Yoo <js.yoo.5b@gmail.com>
    tracing: Fix tp_printk option related with tp_printk_stop_on_boot

Sascha Hauer <s.hauer@pengutronix.de>
    drm/rockchip: dw_hdmi: Do not leave clock enabled in error case

Dan Aloni <dan.aloni@vastdata.com>
    xprtrdma: fix pointer derefs in error cases of rpcrdma_ep_create

Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
    soc: aspeed: lpc-ctrl: Block error printing on probe defer cases

Zoltán Böszörményi <zboszor@gmail.com>
    ata: libata-core: Disable TRIM on M88V29

Brenda Streiff <brenda.streiff@ni.com>
    kconfig: let 'shell' return enough output for deep path names

Axel Rasmussen <axelrasmussen@google.com>
    selftests: fixup build warnings in pidfd / clone3 tests

Axel Rasmussen <axelrasmussen@google.com>
    pidfd: fix test failure due to stack overflow on some arches

Christian Hewitt <christianshewitt@gmail.com>
    arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610

Christian Hewitt <christianshewitt@gmail.com>
    arm64: dts: meson-g12: add ATF BL32 reserved-memory region

Christian Hewitt <christianshewitt@gmail.com>
    arm64: dts: meson-gx: add ATF BL32 reserved-memory region

Florian Westphal <fw@strlen.de>
    netfilter: conntrack: don't refresh sctp entries in closed state

Guo Ren <guoren@linux.alibaba.com>
    irqchip/sifive-plic: Add missing thead,c900-plic match string

Al Cooper <alcooperx@gmail.com>
    phy: usb: Leave some clocks running during suspend

Ye Guojin <ye.guojin@zte.com.cn>
    ARM: OMAP2+: adjust the location of put_device() call in omapdss_init_of

Wan Jiabing <wanjiabing@vivo.com>
    ARM: OMAP2+: hwmod: Add of_node_put() before break

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Don't set NFS_INO_INVALID_XATTR if there is no xattr cache

Jim Mattson <jmattson@google.com>
    KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW

Jim Mattson <jmattson@google.com>
    KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf event

Like Xu <likexu@tencent.com>
    KVM: x86/pmu: Refactoring find_arch_event() to pmc_perf_hw_id()

Miaoqian Lin <linmq006@gmail.com>
    Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj

david regan <dregan@mail.com>
    mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status

Bryan O'Donoghue <bryan.odonoghue@linaro.org>
    mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe()

Linus Torvalds <torvalds@linux-foundation.org>
    tty: n_tty: do not look ahead for EOL character past the end of the buffer

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Do not report writeback errors in nfs_getattr()

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: LOOKUP_DIRECTORY is also ok with symlinks

Laibin Qiu <qiulaibin@huawei.com>
    block/wbt: fix negative inflight counter when remove scsi device

Martin Povišer <povik+lin@cutebit.org>
    ASoC: tas2770: Insert post reset delay

Jens Wiklander <jens.wiklander@linaro.org>
    optee: use driver internal tee_context for some rpc

Jens Wiklander <jens.wiklander@linaro.org>
    tee: export teedev_open() and teedev_close_context()

Sean Christopherson <seanjc@google.com>
    KVM: SVM: Never reject emulation due to SMAP errata for !SEV guests

Christian Eggers <ceggers@arri.de>
    mtd: rawnand: gpmi: don't leak PM reference in error path

Anders Roxell <anders.roxell@linaro.org>
    powerpc/lib/sstep: fix 'ptesync' build error

Mark Brown <broonie@kernel.org>
    ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_range()

Mark Brown <broonie@kernel.org>
    ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw()

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Fix missing codec probe on Shenker Dock 15

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Fix regression on forced probe mask option

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek: Fix deadlock by COEF mutex

Yu Huang <diwang90@gmail.com>
    ALSA: hda/realtek: Add quirk for Legion Y9000X 2019

Muhammad Usama Anjum <usama.anjum@collabora.com>
    selftests/exec: Add non-regular to TEST_GEN_PROGS

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf bpf: Defer freeing string after possible strlen() on it

Radu Bulie <radu-andrei.bulie@nxp.com>
    dpaa2-eth: Initialize mutex used in one step timestamping path

Kees Cook <keescook@chromium.org>
    libsubcmd: Fix use-after-free for realloc(..., 0)

Eric Dumazet <edumazet@google.com>
    bonding: fix data-races around agg_select_timer

Eric Dumazet <edumazet@google.com>
    net_sched: add __rcu annotation to netdev->qdisc

Eric Dumazet <edumazet@google.com>
    drop_monitor: fix data-race in dropmon_net_event / trace_napi_poll_hit

Zhang Changzhong <zhangchangzhong@huawei.com>
    bonding: force carrier update when releasing slave

Xin Long <lucien.xin@gmail.com>
    ping: fix the dif and sdif check in ping_lookup

Miquel Raynal <miquel.raynal@bootlin.com>
    net: ieee802154: ca8210: Fix lifs/sifs periods

Alexey Khoroshilov <khoroshilov@ispras.ru>
    net: dsa: lantiq_gswip: fix use after free in gswip_remove()

Mans Rullgard <mans@mansr.com>
    net: dsa: lan9303: fix reset on probe

Willem de Bruijn <willemb@google.com>
    ipv6: per-netns exclusive flowlabel checks

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nft_synproxy: unregister hooks on init error path

Hangbin Liu <liuhangbin@gmail.com>
    selftests: netfilter: fix exit value for nft_concat_range

Johannes Berg <johannes.berg@intel.com>
    iwlwifi: pcie: gen2: fix locking when "HW not ready"

Johannes Berg <johannes.berg@intel.com>
    iwlwifi: pcie: fix locking when "HW not ready"

Siva Mullati <siva.mullati@intel.com>
    drm/i915/gvt: Make DRM_I915_GVT depend on X86

Seth Forshee <sforshee@digitalocean.com>
    vsock: remove vsock from connected table when connect is interrupted by a signal

Jani Nikula <jani.nikula@intel.com>
    drm/i915/opregion: check port number bounds for SWSCI display power state

Nicholas Bishop <nicholasbishop@google.com>
    drm/radeon: Fix backlight control on iMac 12,1

Johannes Berg <johannes.berg@intel.com>
    iwlwifi: fix use-after-free

Sean Christopherson <seanjc@google.com>
    kbuild: lto: Merge module sections if and only if CONFIG_LTO_CLANG is enabled

Sami Tolvanen <samitolvanen@google.com>
    kbuild: lto: merge module sections

Jason A. Donenfeld <Jason@zx2c4.com>
    random: wake up /dev/random writers after zap

Kees Cook <keescook@chromium.org>
    gcc-plugins/stackleak: Use noinstr in favor of notrace

Igor Pylypiv <ipylypiv@google.com>
    Revert "module, async: async_synchronize_full() on module init iff async is used"

Jan Beulich <jbeulich@suse.com>
    x86/Xen: streamline (and fix) PV CPU enumeration

Christian König <christian.koenig@amd.com>
    drm/amdgpu: fix logic inversion in check

Sagi Grimberg <sagi@grimberg.me>
    nvme-rdma: fix possible use-after-free in transport error_recovery work

Sagi Grimberg <sagi@grimberg.me>
    nvme-tcp: fix possible use-after-free in transport error_recovery work

Sagi Grimberg <sagi@grimberg.me>
    nvme: fix a possible use-after-free in controller reset during load

John Garry <john.garry@huawei.com>
    scsi: pm8001: Fix use-after-free for aborted SSP/STP sas_task

John Garry <john.garry@huawei.com>
    scsi: pm8001: Fix use-after-free for aborted TMF sas_task

Darrick J. Wong <djwong@kernel.org>
    quota: make dquot_quota_sync return errors from ->sync_fs

Darrick J. Wong <djwong@kernel.org>
    vfs: make freeze_super abort when sync_filesystem returns error

Duoming Zhou <duoming@zju.edu.cn>
    ax25: improve the incomplete fix to avoid UAF and NPD bugs

Cristian Marussi <cristian.marussi@arm.com>
    selftests: skip mincore.check_file_mmap when fs lacks needed support

Cristian Marussi <cristian.marussi@arm.com>
    selftests: openat2: Skip testcases that fail with EOPNOTSUPP

Cristian Marussi <cristian.marussi@arm.com>
    selftests: openat2: Add missing dependency in Makefile

Cristian Marussi <cristian.marussi@arm.com>
    selftests: openat2: Print also errno in failure messages

Yang Xu <xuyang2018.jy@fujitsu.com>
    selftests/zram: Adapt the situation that /dev/zram0 is being used

Yang Xu <xuyang2018.jy@fujitsu.com>
    selftests/zram01.sh: Fix compression ratio calculation

Yang Xu <xuyang2018.jy@fujitsu.com>
    selftests/zram: Skip max_comp_streams interface on newer kernel

Miquel Raynal <miquel.raynal@bootlin.com>
    net: ieee802154: at86rf230: Stop leaking skb's

Li Zhijian <lizhijian@cn.fujitsu.com>
    kselftest: signal all child processes

Nícolas F. R. A. Prado <nfraprado@collabora.com>
    selftests: rtc: Increase test timeout so that all tests run

Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
    platform/x86: ISST: Fix possible circular locking dependency detected

Yuka Kawajiri <yukx00@gmail.com>
    platform/x86: touchscreen_dmi: Add info for the RWC NANOTE P8 AY07J 2-in-1

Dāvis Mosāns <davispuh@gmail.com>
    btrfs: send: in case of IO error log it

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    parisc: Add ioread64_lo_hi() and iowrite64_lo_hi()

Long Li <longli@microsoft.com>
    PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology

Linus Torvalds <torvalds@linux-foundation.org>
    mm: don't try to NUMA-migrate COW pages that have other uses

Christian Löhle <CLoehle@hyperstone.com>
    mmc: block: fix read single on recovery logic

John David Anglin <dave.anglin@bell.net>
    parisc: Fix sglist access in ccio-dma.c

John David Anglin <dave.anglin@bell.net>
    parisc: Fix data TLB miss in sba_unmap_sg

John David Anglin <dave.anglin@bell.net>
    parisc: Drop __init from map_pages declaration

Randy Dunlap <rdunlap@infradead.org>
    serial: parisc: GSC: fix build when IOSAPIC is not set

Sean Christopherson <seanjc@google.com>
    Revert "svm: Add warning message for AVIC IPI invalid target"

Sergio Costas <rastersoft@gmail.com>
    HID:Add support for UGTABLET WP5540

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix mailbox command failure during driver initialization

Oliver Hartkopp <socketcan@hartkopp.net>
    can: isotp: add SF_BROADCAST support for functional addressing

Norbert Slusarek <nslusarek@gmx.net>
    can: isotp: prevent race between isotp_bind() and isotp_setsockopt()

Yang Shi <shy828301@gmail.com>
    fs/proc: task_mmu.c: don't read mapcount for migration entry

Linus Torvalds <torvalds@linux-foundation.org>
    fget: clarify and improve __fget_files() implementation

Paul E. McKenney <paulmck@kernel.org>
    rcu: Do not report strict GPs for outgoing CPUs

Roman Gushchin <guro@fb.com>
    mm: memcg: synchronize objcg lists with a dedicated spinlock

Ben Skeggs <bskeggs@redhat.com>
    drm/nouveau/pmu/gm200-: use alternate falcon reset sequence


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/mach-omap2/display.c                      |   2 +-
 arch/arm/mach-omap2/omap_hwmod.c                   |   4 +-
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi  |   6 +
 arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts  |   8 --
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi          |   6 +
 arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts   |   8 --
 arch/parisc/lib/iomap.c                            |  18 +++
 arch/parisc/mm/init.c                              |   9 +-
 arch/powerpc/lib/sstep.c                           |   2 +
 arch/x86/kvm/pmu.c                                 |  15 +--
 arch/x86/kvm/pmu.h                                 |   3 +-
 arch/x86/kvm/svm/avic.c                            |   2 -
 arch/x86/kvm/svm/pmu.c                             |   8 +-
 arch/x86/kvm/svm/svm.c                             |   7 +-
 arch/x86/kvm/vmx/pmu_intel.c                       |   9 +-
 arch/x86/xen/enlighten_pv.c                        |   4 -
 arch/x86/xen/smp_pv.c                              |  26 +---
 block/bfq-iosched.c                                |   2 +
 block/elevator.c                                   |   2 -
 drivers/ata/libata-core.c                          |   1 +
 drivers/char/random.c                              |   5 +-
 drivers/dma/sh/rcar-dmac.c                         |   9 +-
 drivers/dma/stm32-dmamux.c                         |   4 +-
 drivers/edac/edac_mc.c                             |   2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c            |   2 +-
 drivers/gpu/drm/i915/Kconfig                       |   1 +
 drivers/gpu/drm/i915/display/intel_opregion.c      |  15 +++
 drivers/gpu/drm/nouveau/nvkm/falcon/base.c         |   8 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gm200.c    |  31 ++++-
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gm20b.c    |   2 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gp102.c    |   2 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gp10b.c    |   2 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/priv.h     |   2 +
 drivers/gpu/drm/radeon/atombios_encoders.c         |   3 +-
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c        |  14 +--
 drivers/hid/hid-ids.h                              |   1 +
 drivers/hid/hid-quirks.c                           |   1 +
 drivers/hv/vmbus_drv.c                             |   5 +-
 drivers/i2c/busses/i2c-brcmstb.c                   |   2 +-
 drivers/i2c/busses/i2c-qcom-cci.c                  |  16 ++-
 drivers/irqchip/irq-sifive-plic.c                  |   1 +
 drivers/mmc/core/block.c                           |  28 ++---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c           |   2 +-
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c         |   3 +-
 drivers/mtd/nand/raw/qcom_nandc.c                  |  14 +--
 drivers/net/bonding/bond_3ad.c                     |  30 ++++-
 drivers/net/bonding/bond_main.c                    |   5 +-
 drivers/net/dsa/lan9303-core.c                     |   2 +-
 drivers/net/dsa/lantiq_gswip.c                     |   2 +-
 drivers/net/ethernet/cadence/macb_main.c           |   2 +-
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c   |   2 +-
 drivers/net/ieee802154/at86rf230.c                 |  13 +-
 drivers/net/ieee802154/ca8210.c                    |   4 +-
 drivers/net/usb/qmi_wwan.c                         |   2 +
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c       |   2 +
 .../net/wireless/intel/iwlwifi/pcie/trans-gen2.c   |   3 +-
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c    |   3 +-
 drivers/nvme/host/core.c                           |   9 +-
 drivers/nvme/host/rdma.c                           |   1 +
 drivers/nvme/host/tcp.c                            |   1 +
 drivers/parisc/ccio-dma.c                          |   3 +-
 drivers/parisc/sba_iommu.c                         |   3 +-
 drivers/pci/controller/pci-hyperv.c                |  13 +-
 drivers/phy/broadcom/phy-brcm-usb.c                |  38 ++++++
 .../x86/intel_speed_select_if/isst_if_common.c     |  97 +++++++++------
 drivers/platform/x86/touchscreen_dmi.c             |  24 ++++
 drivers/scsi/lpfc/lpfc.h                           |   1 +
 drivers/scsi/lpfc/lpfc_attr.c                      |   3 +
 drivers/scsi/lpfc/lpfc_els.c                       |  20 ++-
 drivers/scsi/lpfc/lpfc_nportdisc.c                 |   5 +-
 drivers/scsi/lpfc/lpfc_sli.c                       |  15 ++-
 drivers/scsi/pm8001/pm8001_sas.c                   |   5 +
 drivers/scsi/pm8001/pm80xx_hwi.c                   |   4 +-
 drivers/soc/aspeed/aspeed-lpc-ctrl.c               |   7 +-
 drivers/tee/optee/core.c                           |   8 ++
 drivers/tee/optee/optee_private.h                  |   2 +
 drivers/tee/optee/rpc.c                            |   8 +-
 drivers/tee/tee_core.c                             |   6 +-
 drivers/tty/n_tty.c                                |   6 +-
 drivers/tty/serial/8250/8250_gsc.c                 |   2 +-
 fs/btrfs/send.c                                    |   4 +
 fs/file.c                                          |  72 ++++++++---
 fs/nfs/dir.c                                       |   4 +-
 fs/nfs/inode.c                                     |  23 +++-
 fs/proc/task_mmu.c                                 |  43 +++++--
 fs/quota/dquot.c                                   |  11 +-
 fs/super.c                                         |  19 +--
 include/linux/memcontrol.h                         |   5 +-
 include/linux/netdevice.h                          |   2 +-
 include/linux/sched.h                              |   1 -
 include/linux/tee_drv.h                            |  14 +++
 include/net/bond_3ad.h                             |   2 +-
 include/net/ipv6.h                                 |   5 +-
 include/net/netns/ipv6.h                           |   3 +-
 include/uapi/linux/can/isotp.h                     |   2 +-
 kernel/async.c                                     |   3 -
 kernel/fork.c                                      |   7 +-
 kernel/locking/lockdep.c                           |   4 +-
 kernel/module.c                                    |  25 +---
 kernel/rcu/tree_plugin.h                           |   2 +-
 kernel/stackleak.c                                 |   5 +-
 kernel/trace/trace.c                               |   4 +
 mm/memcontrol.c                                    |  10 +-
 mm/mprotect.c                                      |   2 +-
 net/ax25/af_ax25.c                                 |   9 +-
 net/can/isotp.c                                    |  71 ++++++++---
 net/core/drop_monitor.c                            |  11 +-
 net/core/rtnetlink.c                               |   6 +-
 net/ipv4/ping.c                                    |  11 +-
 net/ipv6/ip6_flowlabel.c                           |   4 +-
 net/netfilter/nf_conntrack_proto_sctp.c            |   9 ++
 net/netfilter/nft_synproxy.c                       |   4 +-
 net/sched/act_api.c                                |  13 +-
 net/sched/cls_api.c                                |   6 +-
 net/sched/sch_api.c                                |  22 ++--
 net/sched/sch_generic.c                            |  29 +++--
 net/sunrpc/xprtrdma/verbs.c                        |   3 +
 net/vmw_vsock/af_vsock.c                           |   1 +
 scripts/kconfig/confdata.c                         |  13 +-
 scripts/kconfig/preprocess.c                       |   2 +-
 scripts/module.lds.S                               |  26 ++++
 sound/pci/hda/hda_intel.c                          |   5 +-
 sound/pci/hda/patch_realtek.c                      |  40 +++---
 sound/soc/codecs/tas2770.c                         |   7 +-
 sound/soc/soc-ops.c                                |  29 +++--
 tools/lib/subcmd/subcmd-util.h                     |  11 +-
 tools/perf/util/bpf-loader.c                       |   3 +-
 tools/testing/selftests/clone3/clone3.c            |   2 -
 tools/testing/selftests/exec/Makefile              |   4 +-
 tools/testing/selftests/kselftest_harness.h        |   4 +-
 tools/testing/selftests/mincore/mincore_selftest.c |  20 ++-
 .../selftests/netfilter/nft_concat_range.sh        |   2 +-
 tools/testing/selftests/openat2/Makefile           |   2 +-
 tools/testing/selftests/openat2/helpers.h          |  12 +-
 tools/testing/selftests/openat2/openat2_test.c     |  12 +-
 tools/testing/selftests/pidfd/pidfd.h              |  13 +-
 tools/testing/selftests/pidfd/pidfd_fdinfo_test.c  |  22 +++-
 tools/testing/selftests/pidfd/pidfd_test.c         |   6 +-
 tools/testing/selftests/pidfd/pidfd_wait.c         |   5 +-
 tools/testing/selftests/rtc/settings               |   2 +-
 tools/testing/selftests/zram/zram.sh               |  15 +--
 tools/testing/selftests/zram/zram01.sh             |  33 ++---
 tools/testing/selftests/zram/zram02.sh             |   1 -
 tools/testing/selftests/zram/zram_lib.sh           | 134 ++++++++++++++-------
 145 files changed, 1052 insertions(+), 516 deletions(-)

[PATCH 5.10 001/121] drm/nouveau/pmu/gm200-: use alternate falcon reset sequence

[Greg Kroah-Hartman]

From: Ben Skeggs <bskeggs@redhat.com>

commit 4cdd2450bf739bada353e82d27b00db9af8c3001 upstream.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nvkm/falcon/base.c      |    8 ++++--
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gm200.c |   31 +++++++++++++++++++++++-
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gm20b.c |    2 -
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gp102.c |    2 -
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gp10b.c |    2 -
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/priv.h  |    2 +
 6 files changed, 41 insertions(+), 6 deletions(-)

--- a/drivers/gpu/drm/nouveau/nvkm/falcon/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/falcon/base.c
@@ -119,8 +119,12 @@ nvkm_falcon_disable(struct nvkm_falcon *
 int
 nvkm_falcon_reset(struct nvkm_falcon *falcon)
 {
-	nvkm_falcon_disable(falcon);
-	return nvkm_falcon_enable(falcon);
+	if (!falcon->func->reset) {
+		nvkm_falcon_disable(falcon);
+		return nvkm_falcon_enable(falcon);
+	}
+
+	return falcon->func->reset(falcon);
 }
 
 int
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gm200.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gm200.c
@@ -23,9 +23,38 @@
  */
 #include "priv.h"
 
+static int
+gm200_pmu_flcn_reset(struct nvkm_falcon *falcon)
+{
+	struct nvkm_pmu *pmu = container_of(falcon, typeof(*pmu), falcon);
+
+	nvkm_falcon_wr32(falcon, 0x014, 0x0000ffff);
+	pmu->func->reset(pmu);
+	return nvkm_falcon_enable(falcon);
+}
+
+const struct nvkm_falcon_func
+gm200_pmu_flcn = {
+	.debug = 0xc08,
+	.fbif = 0xe00,
+	.load_imem = nvkm_falcon_v1_load_imem,
+	.load_dmem = nvkm_falcon_v1_load_dmem,
+	.read_dmem = nvkm_falcon_v1_read_dmem,
+	.bind_context = nvkm_falcon_v1_bind_context,
+	.wait_for_halt = nvkm_falcon_v1_wait_for_halt,
+	.clear_interrupt = nvkm_falcon_v1_clear_interrupt,
+	.set_start_addr = nvkm_falcon_v1_set_start_addr,
+	.start = nvkm_falcon_v1_start,
+	.enable = nvkm_falcon_v1_enable,
+	.disable = nvkm_falcon_v1_disable,
+	.reset = gm200_pmu_flcn_reset,
+	.cmdq = { 0x4a0, 0x4b0, 4 },
+	.msgq = { 0x4c8, 0x4cc, 0 },
+};
+
 static const struct nvkm_pmu_func
 gm200_pmu = {
-	.flcn = &gt215_pmu_flcn,
+	.flcn = &gm200_pmu_flcn,
 	.enabled = gf100_pmu_enabled,
 	.reset = gf100_pmu_reset,
 };
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gm20b.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gm20b.c
@@ -211,7 +211,7 @@ gm20b_pmu_recv(struct nvkm_pmu *pmu)
 
 static const struct nvkm_pmu_func
 gm20b_pmu = {
-	.flcn = &gt215_pmu_flcn,
+	.flcn = &gm200_pmu_flcn,
 	.enabled = gf100_pmu_enabled,
 	.intr = gt215_pmu_intr,
 	.recv = gm20b_pmu_recv,
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gp102.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gp102.c
@@ -39,7 +39,7 @@ gp102_pmu_enabled(struct nvkm_pmu *pmu)
 
 static const struct nvkm_pmu_func
 gp102_pmu = {
-	.flcn = &gt215_pmu_flcn,
+	.flcn = &gm200_pmu_flcn,
 	.enabled = gp102_pmu_enabled,
 	.reset = gp102_pmu_reset,
 };
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gp10b.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gp10b.c
@@ -78,7 +78,7 @@ gp10b_pmu_acr = {
 
 static const struct nvkm_pmu_func
 gp10b_pmu = {
-	.flcn = &gt215_pmu_flcn,
+	.flcn = &gm200_pmu_flcn,
 	.enabled = gf100_pmu_enabled,
 	.intr = gt215_pmu_intr,
 	.recv = gm20b_pmu_recv,
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/priv.h
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/priv.h
@@ -44,6 +44,8 @@ void gf100_pmu_reset(struct nvkm_pmu *);
 
 void gk110_pmu_pgob(struct nvkm_pmu *, bool);
 
+extern const struct nvkm_falcon_func gm200_pmu_flcn;
+
 void gm20b_pmu_acr_bld_patch(struct nvkm_acr *, u32, s64);
 void gm20b_pmu_acr_bld_write(struct nvkm_acr *, u32, struct nvkm_acr_lsfw *);
 int gm20b_pmu_acr_boot(struct nvkm_falcon *);

[PATCH 5.10 002/121] mm: memcg: synchronize objcg lists with a dedicated spinlock

[Greg Kroah-Hartman]

From: Roman Gushchin <guro@fb.com>

commit 0764db9b49c932b89ee4d9e3236dff4bb07b4a66 upstream.

Alexander reported a circular lock dependency revealed by the mmap1 ltp
test:

  LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1))
          WARNING: possible circular locking dependency detected
          5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted
          ------------------------------------------------------
          mmap1/202299 is trying to acquire lock:
          00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0
          but task is already holding lock:
          00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
          which lock already depends on the new lock.
          the existing dependency chain (in reverse order) is:
          -> #1 (&sighand->siglock){-.-.}-{2:2}:
                 __lock_acquire+0x604/0xbd8
                 lock_acquire.part.0+0xe2/0x238
                 lock_acquire+0xb0/0x200
                 _raw_spin_lock_irqsave+0x6a/0xd8
                 __lock_task_sighand+0x90/0x190
                 cgroup_freeze_task+0x2e/0x90
                 cgroup_migrate_execute+0x11c/0x608
                 cgroup_update_dfl_csses+0x246/0x270
                 cgroup_subtree_control_write+0x238/0x518
                 kernfs_fop_write_iter+0x13e/0x1e0
                 new_sync_write+0x100/0x190
                 vfs_write+0x22c/0x2d8
                 ksys_write+0x6c/0xf8
                 __do_syscall+0x1da/0x208
                 system_call+0x82/0xb0
          -> #0 (css_set_lock){..-.}-{2:2}:
                 check_prev_add+0xe0/0xed8
                 validate_chain+0x736/0xb20
                 __lock_acquire+0x604/0xbd8
                 lock_acquire.part.0+0xe2/0x238
                 lock_acquire+0xb0/0x200
                 _raw_spin_lock_irqsave+0x6a/0xd8
                 obj_cgroup_release+0x4a/0xe0
                 percpu_ref_put_many.constprop.0+0x150/0x168
                 drain_obj_stock+0x94/0xe8
                 refill_obj_stock+0x94/0x278
                 obj_cgroup_charge+0x164/0x1d8
                 kmem_cache_alloc+0xac/0x528
                 __sigqueue_alloc+0x150/0x308
                 __send_signal+0x260/0x550
                 send_signal+0x7e/0x348
                 force_sig_info_to_task+0x104/0x180
                 force_sig_fault+0x48/0x58
                 __do_pgm_check+0x120/0x1f0
                 pgm_check_handler+0x11e/0x180
          other info that might help us debug this:
           Possible unsafe locking scenario:
                 CPU0                    CPU1
                 ----                    ----
            lock(&sighand->siglock);
                                         lock(css_set_lock);
                                         lock(&sighand->siglock);
            lock(css_set_lock);
           *** DEADLOCK ***
          2 locks held by mmap1/202299:
           #0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
           #1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168
          stack backtrace:
          CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1
          Hardware name: IBM 3906 M04 704 (LPAR)
          Call Trace:
            dump_stack_lvl+0x76/0x98
            check_noncircular+0x136/0x158
            check_prev_add+0xe0/0xed8
            validate_chain+0x736/0xb20
            __lock_acquire+0x604/0xbd8
            lock_acquire.part.0+0xe2/0x238
            lock_acquire+0xb0/0x200
            _raw_spin_lock_irqsave+0x6a/0xd8
            obj_cgroup_release+0x4a/0xe0
            percpu_ref_put_many.constprop.0+0x150/0x168
            drain_obj_stock+0x94/0xe8
            refill_obj_stock+0x94/0x278
            obj_cgroup_charge+0x164/0x1d8
            kmem_cache_alloc+0xac/0x528
            __sigqueue_alloc+0x150/0x308
            __send_signal+0x260/0x550
            send_signal+0x7e/0x348
            force_sig_info_to_task+0x104/0x180
            force_sig_fault+0x48/0x58
            __do_pgm_check+0x120/0x1f0
            pgm_check_handler+0x11e/0x180
          INFO: lockdep is turned off.

In this example a slab allocation from __send_signal() caused a
refilling and draining of a percpu objcg stock, resulted in a releasing
of another non-related objcg.  Objcg release path requires taking the
css_set_lock, which is used to synchronize objcg lists.

This can create a circular dependency with the sighandler lock, which is
taken with the locked css_set_lock by the freezer code (to freeze a
task).

In general it seems that using css_set_lock to synchronize objcg lists
makes any slab allocations and deallocation with the locked css_set_lock
and any intervened locks risky.

To fix the problem and make the code more robust let's stop using
css_set_lock to synchronize objcg lists and use a new dedicated spinlock
instead.

Link: https://lkml.kernel.org/r/Yfm1IHmoGdyUR81T@carbon.dhcp.thefacebook.com
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/memcontrol.h |    5 +++--
 mm/memcontrol.c            |   10 +++++-----
 2 files changed, 8 insertions(+), 7 deletions(-)

--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -197,7 +197,7 @@ struct obj_cgroup {
 	struct mem_cgroup *memcg;
 	atomic_t nr_charged_bytes;
 	union {
-		struct list_head list;
+		struct list_head list; /* protected by objcg_lock */
 		struct rcu_head rcu;
 	};
 };
@@ -300,7 +300,8 @@ struct mem_cgroup {
 	int kmemcg_id;
 	enum memcg_kmem_state kmem_state;
 	struct obj_cgroup __rcu *objcg;
-	struct list_head objcg_list; /* list of inherited objcgs */
+	/* list of inherited objcgs, protected by objcg_lock */
+	struct list_head objcg_list;
 #endif
 
 	MEMCG_PADDING(_pad2_);
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -250,7 +250,7 @@ struct cgroup_subsys_state *vmpressure_t
 }
 
 #ifdef CONFIG_MEMCG_KMEM
-extern spinlock_t css_set_lock;
+static DEFINE_SPINLOCK(objcg_lock);
 
 static void obj_cgroup_release(struct percpu_ref *ref)
 {
@@ -284,13 +284,13 @@ static void obj_cgroup_release(struct pe
 	WARN_ON_ONCE(nr_bytes & (PAGE_SIZE - 1));
 	nr_pages = nr_bytes >> PAGE_SHIFT;
 
-	spin_lock_irqsave(&css_set_lock, flags);
+	spin_lock_irqsave(&objcg_lock, flags);
 	memcg = obj_cgroup_memcg(objcg);
 	if (nr_pages)
 		__memcg_kmem_uncharge(memcg, nr_pages);
 	list_del(&objcg->list);
 	mem_cgroup_put(memcg);
-	spin_unlock_irqrestore(&css_set_lock, flags);
+	spin_unlock_irqrestore(&objcg_lock, flags);
 
 	percpu_ref_exit(ref);
 	kfree_rcu(objcg, rcu);
@@ -322,7 +322,7 @@ static void memcg_reparent_objcgs(struct
 
 	objcg = rcu_replace_pointer(memcg->objcg, NULL, true);
 
-	spin_lock_irq(&css_set_lock);
+	spin_lock_irq(&objcg_lock);
 
 	/* Move active objcg to the parent's list */
 	xchg(&objcg->memcg, parent);
@@ -337,7 +337,7 @@ static void memcg_reparent_objcgs(struct
 	}
 	list_splice(&memcg->objcg_list, &parent->objcg_list);
 
-	spin_unlock_irq(&css_set_lock);
+	spin_unlock_irq(&objcg_lock);
 
 	percpu_ref_kill(&objcg->refcnt);
 }

[PATCH 5.10 003/121] rcu: Do not report strict GPs for outgoing CPUs

[Greg Kroah-Hartman]

From: Paul E. McKenney <paulmck@kernel.org>

commit bfb3aa735f82c8d98b32a669934ee7d6b346264d upstream.

An outgoing CPU is marked offline in a stop-machine handler and most
of that CPU's services stop at that point, including IRQ work queues.
However, that CPU must take another pass through the scheduler and through
a number of CPU-hotplug notifiers, many of which contain RCU readers.
In the past, these readers were not a problem because the outgoing CPU
has interrupts disabled, so that rcu_read_unlock_special() would not
be invoked, and thus RCU would never attempt to queue IRQ work on the
outgoing CPU.

This changed with the advent of the CONFIG_RCU_STRICT_GRACE_PERIOD
Kconfig option, in which rcu_read_unlock_special() is invoked upon exit
from almost all RCU read-side critical sections.  Worse yet, because
interrupts are disabled, rcu_read_unlock_special() cannot immediately
report a quiescent state and will therefore attempt to defer this
reporting, for example, by queueing IRQ work.  Which fails with a splat
because the CPU is already marked as being offline.

But it turns out that there is no need to report this quiescent state
because rcu_report_dead() will do this job shortly after the outgoing
CPU makes its final dive into the idle loop.  This commit therefore
makes rcu_read_unlock_special() refrain from queuing IRQ work onto
outgoing CPUs.

Fixes: 44bad5b3cca2 ("rcu: Do full report for .need_qs for strict GPs")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/rcu/tree_plugin.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -628,7 +628,7 @@ static void rcu_read_unlock_special(stru
 			set_tsk_need_resched(current);
 			set_preempt_need_resched();
 			if (IS_ENABLED(CONFIG_IRQ_WORK) && irqs_were_disabled &&
-			    !rdp->defer_qs_iw_pending && exp) {
+			    !rdp->defer_qs_iw_pending && exp && cpu_online(rdp->cpu)) {
 				// Get scheduler to re-evaluate and call hooks.
 				// If !IRQ_WORK, FQS scan will eventually IPI.
 				init_irq_work(&rdp->defer_qs_iw,

[PATCH 5.10 004/121] fget: clarify and improve __fget_files() implementation

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit e386dfc56f837da66d00a078e5314bc8382fab83 upstream.

Commit 054aa8d439b9 ("fget: check that the fd still exists after getting
a ref to it") fixed a race with getting a reference to a file just as it
was being closed.  It was a fairly minimal patch, and I didn't think
re-checking the file pointer lookup would be a measurable overhead,
since it was all right there and cached.

But I was wrong, as pointed out by the kernel test robot.

The 'poll2' case of the will-it-scale.per_thread_ops benchmark regressed
quite noticeably.  Admittedly it seems to be a very artificial test:
doing "poll()" system calls on regular files in a very tight loop in
multiple threads.

That means that basically all the time is spent just looking up file
descriptors without ever doing anything useful with them (not that doing
'poll()' on a regular file is useful to begin with).  And as a result it
shows the extra "re-check fd" cost as a sore thumb.

Happily, the regression is fixable by just writing the code to loook up
the fd to be better and clearer.  There's still a cost to verify the
file pointer, but now it's basically in the noise even for that
benchmark that does nothing else - and the code is more understandable
and has better comments too.

[ Side note: this patch is also a classic case of one that looks very
  messy with the default greedy Myers diff - it's much more legible with
  either the patience of histogram diff algorithm ]

Link: https://lore.kernel.org/lkml/20211210053743.GA36420@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/20211213083154.GA20853@linux.intel.com/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Carel Si <beibei.si@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/file.c |   72 ++++++++++++++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 56 insertions(+), 16 deletions(-)

--- a/fs/file.c
+++ b/fs/file.c
@@ -817,28 +817,68 @@ void do_close_on_exec(struct files_struc
 	spin_unlock(&files->file_lock);
 }
 
-static struct file *__fget_files(struct files_struct *files, unsigned int fd,
-				 fmode_t mask, unsigned int refs)
+static inline struct file *__fget_files_rcu(struct files_struct *files,
+	unsigned int fd, fmode_t mask, unsigned int refs)
 {
-	struct file *file;
+	for (;;) {
+		struct file *file;
+		struct fdtable *fdt = rcu_dereference_raw(files->fdt);
+		struct file __rcu **fdentry;
 
-	rcu_read_lock();
-loop:
-	file = fcheck_files(files, fd);
-	if (file) {
-		/* File object ref couldn't be taken.
-		 * dup2() atomicity guarantee is the reason
-		 * we loop to catch the new file (or NULL pointer)
+		if (unlikely(fd >= fdt->max_fds))
+			return NULL;
+
+		fdentry = fdt->fd + array_index_nospec(fd, fdt->max_fds);
+		file = rcu_dereference_raw(*fdentry);
+		if (unlikely(!file))
+			return NULL;
+
+		if (unlikely(file->f_mode & mask))
+			return NULL;
+
+		/*
+		 * Ok, we have a file pointer. However, because we do
+		 * this all locklessly under RCU, we may be racing with
+		 * that file being closed.
+		 *
+		 * Such a race can take two forms:
+		 *
+		 *  (a) the file ref already went down to zero,
+		 *      and get_file_rcu_many() fails. Just try
+		 *      again:
 		 */
-		if (file->f_mode & mask)
-			file = NULL;
-		else if (!get_file_rcu_many(file, refs))
-			goto loop;
-		else if (__fcheck_files(files, fd) != file) {
+		if (unlikely(!get_file_rcu_many(file, refs)))
+			continue;
+
+		/*
+		 *  (b) the file table entry has changed under us.
+		 *       Note that we don't need to re-check the 'fdt->fd'
+		 *       pointer having changed, because it always goes
+		 *       hand-in-hand with 'fdt'.
+		 *
+		 * If so, we need to put our refs and try again.
+		 */
+		if (unlikely(rcu_dereference_raw(files->fdt) != fdt) ||
+		    unlikely(rcu_dereference_raw(*fdentry) != file)) {
 			fput_many(file, refs);
-			goto loop;
+			continue;
 		}
+
+		/*
+		 * Ok, we have a ref to the file, and checked that it
+		 * still exists.
+		 */
+		return file;
 	}
+}
+
+static struct file *__fget_files(struct files_struct *files, unsigned int fd,
+				 fmode_t mask, unsigned int refs)
+{
+	struct file *file;
+
+	rcu_read_lock();
+	file = __fget_files_rcu(files, fd, mask, refs);
 	rcu_read_unlock();
 
 	return file;

[PATCH 5.10 005/121] fs/proc: task_mmu.c: dont read mapcount for migration entry

[Greg Kroah-Hartman]

From: Yang Shi <shy828301@gmail.com>

commit 24d7275ce2791829953ed4e72f68277ceb2571c6 upstream.

The syzbot reported the below BUG:

  kernel BUG at include/linux/page-flags.h:785!
  invalid opcode: 0000 [#1] PREEMPT SMP KASAN
  CPU: 1 PID: 4392 Comm: syz-executor560 Not tainted 5.16.0-rc6-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:PageDoubleMap include/linux/page-flags.h:785 [inline]
  RIP: 0010:__page_mapcount+0x2d2/0x350 mm/util.c:744
  Call Trace:
    page_mapcount include/linux/mm.h:837 [inline]
    smaps_account+0x470/0xb10 fs/proc/task_mmu.c:466
    smaps_pte_entry fs/proc/task_mmu.c:538 [inline]
    smaps_pte_range+0x611/0x1250 fs/proc/task_mmu.c:601
    walk_pmd_range mm/pagewalk.c:128 [inline]
    walk_pud_range mm/pagewalk.c:205 [inline]
    walk_p4d_range mm/pagewalk.c:240 [inline]
    walk_pgd_range mm/pagewalk.c:277 [inline]
    __walk_page_range+0xe23/0x1ea0 mm/pagewalk.c:379
    walk_page_vma+0x277/0x350 mm/pagewalk.c:530
    smap_gather_stats.part.0+0x148/0x260 fs/proc/task_mmu.c:768
    smap_gather_stats fs/proc/task_mmu.c:741 [inline]
    show_smap+0xc6/0x440 fs/proc/task_mmu.c:822
    seq_read_iter+0xbb0/0x1240 fs/seq_file.c:272
    seq_read+0x3e0/0x5b0 fs/seq_file.c:162
    vfs_read+0x1b5/0x600 fs/read_write.c:479
    ksys_read+0x12d/0x250 fs/read_write.c:619
    do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    entry_SYSCALL_64_after_hwframe+0x44/0xae

The reproducer was trying to read /proc/$PID/smaps when calling
MADV_FREE at the mean time.  MADV_FREE may split THPs if it is called
for partial THP.  It may trigger the below race:

           CPU A                         CPU B
           -----                         -----
  smaps walk:                      MADV_FREE:
  page_mapcount()
    PageCompound()
                                   split_huge_page()
    page = compound_head(page)
    PageDoubleMap(page)

When calling PageDoubleMap() this page is not a tail page of THP anymore
so the BUG is triggered.

This could be fixed by elevated refcount of the page before calling
mapcount, but that would prevent it from counting migration entries, and
it seems overkilling because the race just could happen when PMD is
split so all PTE entries of tail pages are actually migration entries,
and smaps_account() does treat migration entries as mapcount == 1 as
Kirill pointed out.

Add a new parameter for smaps_account() to tell this entry is migration
entry then skip calling page_mapcount().  Don't skip getting mapcount
for device private entries since they do track references with mapcount.

Pagemap also has the similar issue although it was not reported.  Fixed
it as well.

[shy828301@gmail.com: v4]
  Link: https://lkml.kernel.org/r/20220203182641.824731-1-shy828301@gmail.com
[nathan@kernel.org: avoid unused variable warning in pagemap_pmd_range()]
  Link: https://lkml.kernel.org/r/20220207171049.1102239-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20220120202805.3369-1-shy828301@gmail.com
Fixes: e9b61f19858a ("thp: reintroduce split_huge_page()")
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: syzbot+1f52b3a18d5633fa7f82@syzkaller.appspotmail.com
Acked-by: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/proc/task_mmu.c |   43 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 11 deletions(-)

--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -430,7 +430,8 @@ static void smaps_page_accumulate(struct
 }
 
 static void smaps_account(struct mem_size_stats *mss, struct page *page,
-		bool compound, bool young, bool dirty, bool locked)
+		bool compound, bool young, bool dirty, bool locked,
+		bool migration)
 {
 	int i, nr = compound ? compound_nr(page) : 1;
 	unsigned long size = nr * PAGE_SIZE;
@@ -457,8 +458,15 @@ static void smaps_account(struct mem_siz
 	 * page_count(page) == 1 guarantees the page is mapped exactly once.
 	 * If any subpage of the compound page mapped with PTE it would elevate
 	 * page_count().
+	 *
+	 * The page_mapcount() is called to get a snapshot of the mapcount.
+	 * Without holding the page lock this snapshot can be slightly wrong as
+	 * we cannot always read the mapcount atomically.  It is not safe to
+	 * call page_mapcount() even with PTL held if the page is not mapped,
+	 * especially for migration entries.  Treat regular migration entries
+	 * as mapcount == 1.
 	 */
-	if (page_count(page) == 1) {
+	if ((page_count(page) == 1) || migration) {
 		smaps_page_accumulate(mss, page, size, size << PSS_SHIFT, dirty,
 			locked, true);
 		return;
@@ -495,6 +503,7 @@ static void smaps_pte_entry(pte_t *pte,
 	struct vm_area_struct *vma = walk->vma;
 	bool locked = !!(vma->vm_flags & VM_LOCKED);
 	struct page *page = NULL;
+	bool migration = false;
 
 	if (pte_present(*pte)) {
 		page = vm_normal_page(vma, addr, *pte);
@@ -514,9 +523,10 @@ static void smaps_pte_entry(pte_t *pte,
 			} else {
 				mss->swap_pss += (u64)PAGE_SIZE << PSS_SHIFT;
 			}
-		} else if (is_migration_entry(swpent))
+		} else if (is_migration_entry(swpent)) {
+			migration = true;
 			page = migration_entry_to_page(swpent);
-		else if (is_device_private_entry(swpent))
+		} else if (is_device_private_entry(swpent))
 			page = device_private_entry_to_page(swpent);
 	} else if (unlikely(IS_ENABLED(CONFIG_SHMEM) && mss->check_shmem_swap
 							&& pte_none(*pte))) {
@@ -530,7 +540,8 @@ static void smaps_pte_entry(pte_t *pte,
 	if (!page)
 		return;
 
-	smaps_account(mss, page, false, pte_young(*pte), pte_dirty(*pte), locked);
+	smaps_account(mss, page, false, pte_young(*pte), pte_dirty(*pte),
+		      locked, migration);
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -541,6 +552,7 @@ static void smaps_pmd_entry(pmd_t *pmd,
 	struct vm_area_struct *vma = walk->vma;
 	bool locked = !!(vma->vm_flags & VM_LOCKED);
 	struct page *page = NULL;
+	bool migration = false;
 
 	if (pmd_present(*pmd)) {
 		/* FOLL_DUMP will return -EFAULT on huge zero page */
@@ -548,8 +560,10 @@ static void smaps_pmd_entry(pmd_t *pmd,
 	} else if (unlikely(thp_migration_supported() && is_swap_pmd(*pmd))) {
 		swp_entry_t entry = pmd_to_swp_entry(*pmd);
 
-		if (is_migration_entry(entry))
+		if (is_migration_entry(entry)) {
+			migration = true;
 			page = migration_entry_to_page(entry);
+		}
 	}
 	if (IS_ERR_OR_NULL(page))
 		return;
@@ -561,7 +575,9 @@ static void smaps_pmd_entry(pmd_t *pmd,
 		/* pass */;
 	else
 		mss->file_thp += HPAGE_PMD_SIZE;
-	smaps_account(mss, page, true, pmd_young(*pmd), pmd_dirty(*pmd), locked);
+
+	smaps_account(mss, page, true, pmd_young(*pmd), pmd_dirty(*pmd),
+		      locked, migration);
 }
 #else
 static void smaps_pmd_entry(pmd_t *pmd, unsigned long addr,
@@ -1366,6 +1382,7 @@ static pagemap_entry_t pte_to_pagemap_en
 {
 	u64 frame = 0, flags = 0;
 	struct page *page = NULL;
+	bool migration = false;
 
 	if (pte_present(pte)) {
 		if (pm->show_pfn)
@@ -1383,8 +1400,10 @@ static pagemap_entry_t pte_to_pagemap_en
 			frame = swp_type(entry) |
 				(swp_offset(entry) << MAX_SWAPFILES_SHIFT);
 		flags |= PM_SWAP;
-		if (is_migration_entry(entry))
+		if (is_migration_entry(entry)) {
+			migration = true;
 			page = migration_entry_to_page(entry);
+		}
 
 		if (is_device_private_entry(entry))
 			page = device_private_entry_to_page(entry);
@@ -1392,7 +1411,7 @@ static pagemap_entry_t pte_to_pagemap_en
 
 	if (page && !PageAnon(page))
 		flags |= PM_FILE;
-	if (page && page_mapcount(page) == 1)
+	if (page && !migration && page_mapcount(page) == 1)
 		flags |= PM_MMAP_EXCLUSIVE;
 	if (vma->vm_flags & VM_SOFTDIRTY)
 		flags |= PM_SOFT_DIRTY;
@@ -1408,8 +1427,9 @@ static int pagemap_pmd_range(pmd_t *pmdp
 	spinlock_t *ptl;
 	pte_t *pte, *orig_pte;
 	int err = 0;
-
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	bool migration = false;
+
 	ptl = pmd_trans_huge_lock(pmdp, vma);
 	if (ptl) {
 		u64 flags = 0, frame = 0;
@@ -1444,11 +1464,12 @@ static int pagemap_pmd_range(pmd_t *pmdp
 			if (pmd_swp_soft_dirty(pmd))
 				flags |= PM_SOFT_DIRTY;
 			VM_BUG_ON(!is_pmd_migration_entry(pmd));
+			migration = is_migration_entry(entry);
 			page = migration_entry_to_page(entry);
 		}
 #endif
 
-		if (page && page_mapcount(page) == 1)
+		if (page && !migration && page_mapcount(page) == 1)
 			flags |= PM_MMAP_EXCLUSIVE;
 
 		for (; addr != end; addr += PAGE_SIZE) {

[PATCH 5.10 006/121] can: isotp: prevent race between isotp_bind() and isotp_setsockopt()

[Greg Kroah-Hartman]

From: Norbert Slusarek <nslusarek@gmx.net>

commit 2b17c400aeb44daf041627722581ade527bb3c1d upstream.

A race condition was found in isotp_setsockopt() which allows to
change socket options after the socket was bound.
For the specific case of SF_BROADCAST support, this might lead to possible
use-after-free because can_rx_unregister() is not called.

Checking for the flag under the socket lock in isotp_bind() and taking
the lock in isotp_setsockopt() fixes the issue.

Fixes: 921ca574cd38 ("can: isotp: add SF_BROADCAST support for functional addressing")
Link: https://lore.kernel.org/r/trinity-e6ae9efa-9afb-4326-84c0-f3609b9b8168-1620773528307@3c-app-gmx-bs06
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |   21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1193,16 +1193,13 @@ static int isotp_getname(struct socket *
 	return ISOTP_MIN_NAMELEN;
 }
 
-static int isotp_setsockopt(struct socket *sock, int level, int optname,
+static int isotp_setsockopt_locked(struct socket *sock, int level, int optname,
 			    sockptr_t optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
 	struct isotp_sock *so = isotp_sk(sk);
 	int ret = 0;
 
-	if (level != SOL_CAN_ISOTP)
-		return -EINVAL;
-
 	if (so->bound)
 		return -EISCONN;
 
@@ -1277,6 +1274,22 @@ static int isotp_setsockopt(struct socke
 	return ret;
 }
 
+static int isotp_setsockopt(struct socket *sock, int level, int optname,
+			    sockptr_t optval, unsigned int optlen)
+
+{
+	struct sock *sk = sock->sk;
+	int ret;
+
+	if (level != SOL_CAN_ISOTP)
+		return -EINVAL;
+
+	lock_sock(sk);
+	ret = isotp_setsockopt_locked(sock, level, optname, optval, optlen);
+	release_sock(sk);
+	return ret;
+}
+
 static int isotp_getsockopt(struct socket *sock, int level, int optname,
 			    char __user *optval, int __user *optlen)
 {

[PATCH 5.10 007/121] can: isotp: add SF_BROADCAST support for functional addressing

[Greg Kroah-Hartman]

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 921ca574cd382142add8b12d0a7117f495510de5 upstream.

When CAN_ISOTP_SF_BROADCAST is set in the CAN_ISOTP_OPTS flags the CAN_ISOTP
socket is switched into functional addressing mode, where only single frame
(SF) protocol data units can be send on the specified CAN interface and the
given tp.tx_id after bind().

In opposite to normal and extended addressing this socket does not register a
CAN-ID for reception which would be needed for a 1-to-1 ISOTP connection with a
segmented bi-directional data transfer.

Sending SFs on this socket is therefore a TX-only 'broadcast' operation.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Thomas Wagner <thwa1@web.de>
Link: https://lore.kernel.org/r/20201206144731.4609-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/uapi/linux/can/isotp.h |    2 -
 net/can/isotp.c                |   50 +++++++++++++++++++++++++++++------------
 2 files changed, 37 insertions(+), 15 deletions(-)

--- a/include/uapi/linux/can/isotp.h
+++ b/include/uapi/linux/can/isotp.h
@@ -135,7 +135,7 @@ struct can_isotp_ll_options {
 #define CAN_ISOTP_FORCE_RXSTMIN	0x100	/* ignore CFs depending on rx stmin */
 #define CAN_ISOTP_RX_EXT_ADDR	0x200	/* different rx extended addressing */
 #define CAN_ISOTP_WAIT_TX_DONE	0x400	/* wait for tx completion */
-
+#define CAN_ISOTP_SF_BROADCAST	0x800	/* 1-to-N functional addressing */
 
 /* default values */
 
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -888,6 +888,16 @@ static int isotp_sendmsg(struct socket *
 		goto err_out_drop;
 	}
 
+	/* take care of a potential SF_DL ESC offset for TX_DL > 8 */
+	off = (so->tx.ll_dl > CAN_MAX_DLEN) ? 1 : 0;
+
+	/* does the given data fit into a single frame for SF_BROADCAST? */
+	if ((so->opt.flags & CAN_ISOTP_SF_BROADCAST) &&
+	    (size > so->tx.ll_dl - SF_PCI_SZ4 - ae - off)) {
+		err = -EINVAL;
+		goto err_out_drop;
+	}
+
 	err = memcpy_from_msg(so->tx.buf, msg, size);
 	if (err < 0)
 		goto err_out_drop;
@@ -915,9 +925,6 @@ static int isotp_sendmsg(struct socket *
 	cf = (struct canfd_frame *)skb->data;
 	skb_put_zero(skb, so->ll.mtu);
 
-	/* take care of a potential SF_DL ESC offset for TX_DL > 8 */
-	off = (so->tx.ll_dl > CAN_MAX_DLEN) ? 1 : 0;
-
 	/* check for single frame transmission depending on TX_DL */
 	if (size <= so->tx.ll_dl - SF_PCI_SZ4 - ae - off) {
 		/* The message size generally fits into a SingleFrame - good.
@@ -1057,7 +1064,7 @@ static int isotp_release(struct socket *
 	lock_sock(sk);
 
 	/* remove current filters & unregister */
-	if (so->bound) {
+	if (so->bound && (!(so->opt.flags & CAN_ISOTP_SF_BROADCAST))) {
 		if (so->ifindex) {
 			struct net_device *dev;
 
@@ -1097,15 +1104,12 @@ static int isotp_bind(struct socket *soc
 	struct net_device *dev;
 	int err = 0;
 	int notify_enetdown = 0;
+	int do_rx_reg = 1;
 
 	if (len < ISOTP_MIN_NAMELEN)
 		return -EINVAL;
 
-	if (addr->can_addr.tp.rx_id == addr->can_addr.tp.tx_id)
-		return -EADDRNOTAVAIL;
-
-	if ((addr->can_addr.tp.rx_id | addr->can_addr.tp.tx_id) &
-	    (CAN_ERR_FLAG | CAN_RTR_FLAG))
+	if (addr->can_addr.tp.tx_id & (CAN_ERR_FLAG | CAN_RTR_FLAG))
 		return -EADDRNOTAVAIL;
 
 	if (!addr->can_ifindex)
@@ -1113,6 +1117,23 @@ static int isotp_bind(struct socket *soc
 
 	lock_sock(sk);
 
+	/* do not register frame reception for functional addressing */
+	if (so->opt.flags & CAN_ISOTP_SF_BROADCAST)
+		do_rx_reg = 0;
+
+	/* do not validate rx address for functional addressing */
+	if (do_rx_reg) {
+		if (addr->can_addr.tp.rx_id == addr->can_addr.tp.tx_id) {
+			err = -EADDRNOTAVAIL;
+			goto out;
+		}
+
+		if (addr->can_addr.tp.rx_id & (CAN_ERR_FLAG | CAN_RTR_FLAG)) {
+			err = -EADDRNOTAVAIL;
+			goto out;
+		}
+	}
+
 	if (so->bound && addr->can_ifindex == so->ifindex &&
 	    addr->can_addr.tp.rx_id == so->rxid &&
 	    addr->can_addr.tp.tx_id == so->txid)
@@ -1138,13 +1159,14 @@ static int isotp_bind(struct socket *soc
 
 	ifindex = dev->ifindex;
 
-	can_rx_register(net, dev, addr->can_addr.tp.rx_id,
-			SINGLE_MASK(addr->can_addr.tp.rx_id), isotp_rcv, sk,
-			"isotp", sk);
+	if (do_rx_reg)
+		can_rx_register(net, dev, addr->can_addr.tp.rx_id,
+				SINGLE_MASK(addr->can_addr.tp.rx_id),
+				isotp_rcv, sk, "isotp", sk);
 
 	dev_put(dev);
 
-	if (so->bound) {
+	if (so->bound && do_rx_reg) {
 		/* unregister old filter */
 		if (so->ifindex) {
 			dev = dev_get_by_index(net, so->ifindex);
@@ -1357,7 +1379,7 @@ static void isotp_notify(struct isotp_so
 	case NETDEV_UNREGISTER:
 		lock_sock(sk);
 		/* remove current filters & unregister */
-		if (so->bound)
+		if (so->bound && (!(so->opt.flags & CAN_ISOTP_SF_BROADCAST)))
 			can_rx_unregister(dev_net(dev), dev, so->rxid,
 					  SINGLE_MASK(so->rxid),
 					  isotp_rcv, sk);

[PATCH 5.10 008/121] scsi: lpfc: Fix mailbox command failure during driver initialization

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

commit efe1dc571a5b808baa26682eef16561be2e356fd upstream.

Contention for the mailbox interface may occur during driver initialization
(immediately after a function reset), between mailbox commands initiated
via ioctl (bsg) and those driver requested by the driver.

After setting SLI_ACTIVE flag for a port, there is a window in which the
driver will allow an ioctl to be initiated while the adapter is
initializing and issuing mailbox commands via polling. The polling logic
then gets confused.

Correct by having thread setting SLI_ACTIVE spot an active mailbox command
and allow it complete before proceeding.

Link: https://lore.kernel.org/r/20210921143008.64212-1-jsmart2021@gmail.com
Co-developed-by: Nigel Kirkland <nkirkland2304@gmail.com>
Signed-off-by: Nigel Kirkland <nkirkland2304@gmail.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_sli.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -7372,6 +7372,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phb
 	struct lpfc_vport *vport = phba->pport;
 	struct lpfc_dmabuf *mp;
 	struct lpfc_rqb *rqbp;
+	u32 flg;
 
 	/* Perform a PCI function reset to start from clean */
 	rc = lpfc_pci_function_reset(phba);
@@ -7385,7 +7386,17 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phb
 	else {
 		spin_lock_irq(&phba->hbalock);
 		phba->sli.sli_flag |= LPFC_SLI_ACTIVE;
+		flg = phba->sli.sli_flag;
 		spin_unlock_irq(&phba->hbalock);
+		/* Allow a little time after setting SLI_ACTIVE for any polled
+		 * MBX commands to complete via BSG.
+		 */
+		for (i = 0; i < 50 && (flg & LPFC_SLI_MBOX_ACTIVE); i++) {
+			msleep(20);
+			spin_lock_irq(&phba->hbalock);
+			flg = phba->sli.sli_flag;
+			spin_unlock_irq(&phba->hbalock);
+		}
 	}
 
 	lpfc_sli4_dip(phba);
@@ -8922,7 +8933,7 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *
 					"(%d):2541 Mailbox command x%x "
 					"(x%x/x%x) failure: "
 					"mqe_sta: x%x mcqe_sta: x%x/x%x "
-					"Data: x%x x%x\n,",
+					"Data: x%x x%x\n",
 					mboxq->vport ? mboxq->vport->vpi : 0,
 					mboxq->u.mb.mbxCommand,
 					lpfc_sli_config_mbox_subsys_get(phba,
@@ -8956,7 +8967,7 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *
 					"(%d):2597 Sync Mailbox command "
 					"x%x (x%x/x%x) failure: "
 					"mqe_sta: x%x mcqe_sta: x%x/x%x "
-					"Data: x%x x%x\n,",
+					"Data: x%x x%x\n",
 					mboxq->vport ? mboxq->vport->vpi : 0,
 					mboxq->u.mb.mbxCommand,
 					lpfc_sli_config_mbox_subsys_get(phba,

[PATCH 5.10 009/121] HID:Add support for UGTABLET WP5540

[Greg Kroah-Hartman]

From: Sergio Costas <rastersoft@gmail.com>

commit fd5dd6acd8f823ea804f76d3af64fa1be9d5fb78 upstream.

This patch adds support for the UGTABLET WP5540 digitizer tablet
devices. Without it, the pen moves the cursor, but neither the
buttons nor the tap sensor in the tip do work.

Signed-off-by: Sergio Costas <rastersoft@gmail.com>
Link: https://lore.kernel.org/r/63dece1d-91ca-1b1b-d90d-335be66896be@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-ids.h    |    1 +
 drivers/hid/hid-quirks.c |    1 +
 2 files changed, 2 insertions(+)

--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1318,6 +1318,7 @@
 #define USB_VENDOR_ID_UGTIZER			0x2179
 #define USB_DEVICE_ID_UGTIZER_TABLET_GP0610	0x0053
 #define USB_DEVICE_ID_UGTIZER_TABLET_GT5040	0x0077
+#define USB_DEVICE_ID_UGTIZER_TABLET_WP5540	0x0004
 
 #define USB_VENDOR_ID_VIEWSONIC			0x0543
 #define USB_DEVICE_ID_VIEWSONIC_PD1011		0xe621
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -187,6 +187,7 @@ static const struct hid_device_id hid_qu
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD), HID_QUIRK_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWA60), HID_QUIRK_MULTI_INPUT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER, USB_DEVICE_ID_UGTIZER_TABLET_WP5540), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET), HID_QUIRK_MULTI_INPUT },

[PATCH 5.10 010/121] Revert "svm: Add warning message for AVIC IPI invalid target"

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit dd4589eee99db8f61f7b8f7df1531cad3f74a64d upstream.

Remove a WARN on an "AVIC IPI invalid target" exit, the WARN is trivial
to trigger from guest as it will fail on any destination APIC ID that
doesn't exist from the guest's perspective.

Don't bother recording anything in the kernel log, the common tracepoint
for kvm_avic_incomplete_ipi() is sufficient for debugging.

This reverts commit 37ef0c4414c9743ba7f1af4392f0a27a99649f2a.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/svm/avic.c |    2 --
 1 file changed, 2 deletions(-)

--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -344,8 +344,6 @@ int avic_incomplete_ipi_interception(str
 		break;
 	}
 	case AVIC_IPI_FAILURE_INVALID_TARGET:
-		WARN_ONCE(1, "Invalid IPI target: index=%u, vcpu=%d, icr=%#0x:%#0x\n",
-			  index, svm->vcpu.vcpu_id, icrh, icrl);
 		break;
 	case AVIC_IPI_FAILURE_INVALID_BACKING_PAGE:
 		WARN_ONCE(1, "Invalid backing page\n");

[PATCH 5.10 011/121] serial: parisc: GSC: fix build when IOSAPIC is not set

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit 6e8793674bb0d1135ca0e5c9f7e16fecbf815926 upstream.

There is a build error when using a kernel .config file from
'kernel test robot' for a different build problem:

hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3':
(.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq'

when:
  CONFIG_GSC=y
  CONFIG_SERIO_GSCPS2=y
  CONFIG_SERIAL_8250_GSC=y
  CONFIG_PCI is not set
    and hence PCI_LBA is not set.
  IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled.

Make the use of iosapic_serial_irq() conditional to fix the build error.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-serial@vger.kernel.org
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_gsc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -26,7 +26,7 @@ static int __init serial_init_chip(struc
 	unsigned long address;
 	int err;
 
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && defined(CONFIG_IOSAPIC)
 	if (!dev->irq && (dev->id.sversion == 0xad))
 		dev->irq = iosapic_serial_irq(dev);
 #endif

[PATCH 5.10 012/121] parisc: Drop __init from map_pages declaration

[Greg Kroah-Hartman]

From: John David Anglin <dave.anglin@bell.net>

commit 9129886b88185962538180625ca8051362b01327 upstream.

With huge kernel pages, we randomly eat a SPARC in map_pages(). This
is fixed by dropping __init from the declaration.

However, map_pages references the __init routine memblock_alloc_try_nid
via memblock_alloc.  Thus, it needs to be marked with __ref.

memblock_alloc is only called before the kernel text is set to readonly.

The __ref on free_initmem is no longer needed.

Comment regarding map_pages being in the init section is removed.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/parisc/mm/init.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -346,9 +346,9 @@ static void __init setup_bootmem(void)
 
 static bool kernel_set_to_readonly;
 
-static void __init map_pages(unsigned long start_vaddr,
-			     unsigned long start_paddr, unsigned long size,
-			     pgprot_t pgprot, int force)
+static void __ref map_pages(unsigned long start_vaddr,
+			    unsigned long start_paddr, unsigned long size,
+			    pgprot_t pgprot, int force)
 {
 	pmd_t *pmd;
 	pte_t *pg_table;
@@ -458,7 +458,7 @@ void __init set_kernel_text_rw(int enabl
 	flush_tlb_all();
 }
 
-void __ref free_initmem(void)
+void free_initmem(void)
 {
 	unsigned long init_begin = (unsigned long)__init_begin;
 	unsigned long init_end = (unsigned long)__init_end;
@@ -472,7 +472,6 @@ void __ref free_initmem(void)
 	/* The init text pages are marked R-X.  We have to
 	 * flush the icache and mark them RW-
 	 *
-	 * This is tricky, because map_pages is in the init section.
 	 * Do a dummy remap of the data section first (the data
 	 * section is already PAGE_KERNEL) to pull in the TLB entries
 	 * for map_kernel */

[PATCH 5.10 013/121] parisc: Fix data TLB miss in sba_unmap_sg

[Greg Kroah-Hartman]

From: John David Anglin <dave.anglin@bell.net>

commit b7d6f44a0fa716a82969725516dc0b16bc7cd514 upstream.

Rolf Eike Beer reported the following bug:

[1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018
[1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4
[1274934.746891] Hardware name: 9000/785/C8000
[1274934.746891]
[1274934.746891]      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[1274934.746891] PSW: 00001000000001001111111000001110 Not tainted
[1274934.746891] r00-03  000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000
[1274934.746891] r04-07  0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001
[1274934.746891] r08-11  0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001
[1274934.746891] r12-15  0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0
[1274934.746891] r16-19  0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007
[1274934.746891] r20-23  0000000000000006 000000004a368950 0000000000000000 0000000000000001
[1274934.746891] r24-27  0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0
[1274934.746891] r28-31  0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118
[1274934.746891] sr00-03  00000000066e5800 0000000000000000 0000000000000000 00000000066e5800
[1274934.746891] sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[1274934.746891]
[1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec
[1274934.746891]  IIR: 48780030    ISR: 0000000000000000  IOR: 0000004140000018
[1274934.746891]  CPU:        3   CR30: 00000040e3a9c000 CR31: ffffffffffffffff
[1274934.746891]  ORIG_R28: 0000000040acdd58
[1274934.746891]  IAOQ[0]: sba_unmap_sg+0xb0/0x118
[1274934.746891]  IAOQ[1]: sba_unmap_sg+0xb4/0x118
[1274934.746891]  RP(r2): sba_unmap_sg+0xac/0x118
[1274934.746891] Backtrace:
[1274934.746891]  [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70
[1274934.746891]  [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60
[1274934.746891]  [<00000000407a3488>] mptscsih_io_done+0x150/0xd70
[1274934.746891]  [<0000000040798600>] mpt_interrupt+0x168/0xa68
[1274934.746891]  [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278
[1274934.746891]  [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8
[1274934.746891]  [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0
[1274934.746891]  [<00000000402548e0>] generic_handle_irq+0x50/0x70
[1274934.746891]  [<000000004019a254>] call_on_stack+0x18/0x24
[1274934.746891]
[1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?)

The bug is caused by overrunning the sglist and incorrectly testing
sg_dma_len(sglist) before nents. Normally this doesn't cause a crash,
but in this case sglist crossed a page boundary. This occurs in the
following code:

	while (sg_dma_len(sglist) && nents--) {

The fix is simply to test nents first and move the decrement of nents
into the loop.

Reported-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/parisc/sba_iommu.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -1047,7 +1047,7 @@ sba_unmap_sg(struct device *dev, struct
 	spin_unlock_irqrestore(&ioc->res_lock, flags);
 #endif
 
-	while (sg_dma_len(sglist) && nents--) {
+	while (nents && sg_dma_len(sglist)) {
 
 		sba_unmap_page(dev, sg_dma_address(sglist), sg_dma_len(sglist),
 				direction, 0);
@@ -1056,6 +1056,7 @@ sba_unmap_sg(struct device *dev, struct
 		ioc->usingle_calls--;	/* kluge since call is unmap_sg() */
 #endif
 		++sglist;
+		nents--;
 	}
 
 	DBG_RUN_SG("%s() DONE (nents %d)\n", __func__,  nents);

[PATCH 5.10 014/121] parisc: Fix sglist access in ccio-dma.c

[Greg Kroah-Hartman]

From: John David Anglin <dave.anglin@bell.net>

commit d7da660cab47183cded65e11b64497d0f56c6edf upstream.

This patch implements the same bug fix to ccio-dma.c as to sba_iommu.c.
It ensures that only the allocated entries of the sglist are accessed.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/parisc/ccio-dma.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1003,7 +1003,7 @@ ccio_unmap_sg(struct device *dev, struct
 	ioc->usg_calls++;
 #endif
 
-	while(sg_dma_len(sglist) && nents--) {
+	while (nents && sg_dma_len(sglist)) {
 
 #ifdef CCIO_COLLECT_STATS
 		ioc->usg_pages += sg_dma_len(sglist) >> PAGE_SHIFT;
@@ -1011,6 +1011,7 @@ ccio_unmap_sg(struct device *dev, struct
 		ccio_unmap_page(dev, sg_dma_address(sglist),
 				  sg_dma_len(sglist), direction, 0);
 		++sglist;
+		nents--;
 	}
 
 	DBG_RUN_SG("%s() DONE (nents %d)\n", __func__, nents);

[PATCH 5.10 015/121] mmc: block: fix read single on recovery logic

[Greg Kroah-Hartman]

From: Christian Löhle <CLoehle@hyperstone.com>

commit 54309fde1a352ad2674ebba004a79f7d20b9f037 upstream.

On reads with MMC_READ_MULTIPLE_BLOCK that fail,
the recovery handler will use MMC_READ_SINGLE_BLOCK for
each of the blocks, up to MMC_READ_SINGLE_RETRIES times each.
The logic for this is fixed to never report unsuccessful reads
as success to the block layer.

On command error with retries remaining, blk_update_request was
called with whatever value error was set last to.
In case it was last set to BLK_STS_OK (default), the read will be
reported as success, even though there was no data read from the device.
This could happen on a CRC mismatch for the response,
a card rejecting the command (e.g. again due to a CRC mismatch).
In case it was last set to BLK_STS_IOERR, the error is reported correctly,
but no retries will be attempted.

Fixes: 81196976ed946c ("mmc: block: Add blk-mq support")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/bc706a6ab08c4fe2834ba0c05a804672@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/block.c |   28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1642,31 +1642,31 @@ static void mmc_blk_read_single(struct m
 	struct mmc_card *card = mq->card;
 	struct mmc_host *host = card->host;
 	blk_status_t error = BLK_STS_OK;
-	int retries = 0;
 
 	do {
 		u32 status;
 		int err;
+		int retries = 0;
 
-		mmc_blk_rw_rq_prep(mqrq, card, 1, mq);
+		while (retries++ <= MMC_READ_SINGLE_RETRIES) {
+			mmc_blk_rw_rq_prep(mqrq, card, 1, mq);
 
-		mmc_wait_for_req(host, mrq);
+			mmc_wait_for_req(host, mrq);
 
-		err = mmc_send_status(card, &status);
-		if (err)
-			goto error_exit;
-
-		if (!mmc_host_is_spi(host) &&
-		    !mmc_ready_for_data(status)) {
-			err = mmc_blk_fix_state(card, req);
+			err = mmc_send_status(card, &status);
 			if (err)
 				goto error_exit;
-		}
 
-		if (mrq->cmd->error && retries++ < MMC_READ_SINGLE_RETRIES)
-			continue;
+			if (!mmc_host_is_spi(host) &&
+			    !mmc_ready_for_data(status)) {
+				err = mmc_blk_fix_state(card, req);
+				if (err)
+					goto error_exit;
+			}
 
-		retries = 0;
+			if (!mrq->cmd->error)
+				break;
+		}
 
 		if (mrq->cmd->error ||
 		    mrq->data->error ||

[PATCH 5.10 016/121] mm: dont try to NUMA-migrate COW pages that have other uses

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 80d47f5de5e311cbc0d01ebb6ee684e8f4c196c6 upstream.

Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:

 "All the details are in the bug, but the bottom line is that somehow,
  this patch causes corruption when the numa balancing feature is
  enabled AND we don't use process affinity AND we use GUP to pin pages
  so our accelerator can DMA to/from system memory.

  Either disabling numa balancing, using process affinity to bind to
  specific numa-node or reverting this patch causes the bug to
  disappear"

and Oded bisected the issue to commit 09854ba94c6a ("mm: do_wp_page()
simplification").

Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW.  But it appears it
does.  Suspicious.

However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical.  It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.

The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.

Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.

Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information).  Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.

The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless.

Fixes: 09854ba94c6a ("mm: do_wp_page() simplification")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215616
Link: https://lore.kernel.org/all/CAFCwf10eNmwq2wD71xjUhqkvv5+_pJMR1nPug2RqNDcFT4H86Q@mail.gmail.com/
Reported-and-tested-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/mprotect.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -94,7 +94,7 @@ static unsigned long change_pte_range(st
 
 				/* Also skip shared copy-on-write pages */
 				if (is_cow_mapping(vma->vm_flags) &&
-				    page_mapcount(page) != 1)
+				    page_count(page) != 1)
 					continue;
 
 				/*

[PATCH 5.10 017/121] PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology

[Greg Kroah-Hartman]

From: Long Li <longli@microsoft.com>

commit 3149efcdf2c6314420c418dfc94de53bfd076b1f upstream.

When kernel boots with a NUMA topology with some NUMA nodes offline, the PCI
driver should only set an online NUMA node on the device. This can happen
during KDUMP where some NUMA nodes are not made online by the KDUMP kernel.

This patch also fixes the case where kernel is booting with "numa=off".

Fixes: 999dd956d838 ("PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@microsoft.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/1643247814-15184-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/controller/pci-hyperv.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -1841,8 +1841,17 @@ static void hv_pci_assign_numa_node(stru
 		if (!hv_dev)
 			continue;
 
-		if (hv_dev->desc.flags & HV_PCI_DEVICE_FLAG_NUMA_AFFINITY)
-			set_dev_node(&dev->dev, hv_dev->desc.virtual_numa_node);
+		if (hv_dev->desc.flags & HV_PCI_DEVICE_FLAG_NUMA_AFFINITY &&
+		    hv_dev->desc.virtual_numa_node < num_possible_nodes())
+			/*
+			 * The kernel may boot with some NUMA nodes offline
+			 * (e.g. in a KDUMP kernel) or with NUMA disabled via
+			 * "numa=off". In those cases, adjust the host provided
+			 * NUMA node to a valid NUMA node used by the kernel.
+			 */
+			set_dev_node(&dev->dev,
+				     numa_map_to_online_node(
+					     hv_dev->desc.virtual_numa_node));
 
 		put_pcichild(hv_dev);
 	}

[PATCH 5.10 018/121] parisc: Add ioread64_lo_hi() and iowrite64_lo_hi()

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit 18a1d5e1945385d9b5adc3fe11427ce4a9d2826e upstream.

It's a followup to the previous commit f15309d7ad5d ("parisc: Add
ioread64_hi_lo() and iowrite64_hi_lo()") which does only half of
the job. Add the rest, so we won't get a new kernel test robot
reports.

Fixes: f15309d7ad5d ("parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/parisc/lib/iomap.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/arch/parisc/lib/iomap.c
+++ b/arch/parisc/lib/iomap.c
@@ -346,6 +346,16 @@ u64 ioread64be(const void __iomem *addr)
 	return *((u64 *)addr);
 }
 
+u64 ioread64_lo_hi(const void __iomem *addr)
+{
+	u32 low, high;
+
+	low = ioread32(addr);
+	high = ioread32(addr + sizeof(u32));
+
+	return low + ((u64)high << 32);
+}
+
 u64 ioread64_hi_lo(const void __iomem *addr)
 {
 	u32 low, high;
@@ -419,6 +429,12 @@ void iowrite64be(u64 datum, void __iomem
 	}
 }
 
+void iowrite64_lo_hi(u64 val, void __iomem *addr)
+{
+	iowrite32(val, addr);
+	iowrite32(val >> 32, addr + sizeof(u32));
+}
+
 void iowrite64_hi_lo(u64 val, void __iomem *addr)
 {
 	iowrite32(val >> 32, addr + sizeof(u32));
@@ -527,6 +543,7 @@ EXPORT_SYMBOL(ioread32);
 EXPORT_SYMBOL(ioread32be);
 EXPORT_SYMBOL(ioread64);
 EXPORT_SYMBOL(ioread64be);
+EXPORT_SYMBOL(ioread64_lo_hi);
 EXPORT_SYMBOL(ioread64_hi_lo);
 EXPORT_SYMBOL(iowrite8);
 EXPORT_SYMBOL(iowrite16);
@@ -535,6 +552,7 @@ EXPORT_SYMBOL(iowrite32);
 EXPORT_SYMBOL(iowrite32be);
 EXPORT_SYMBOL(iowrite64);
 EXPORT_SYMBOL(iowrite64be);
+EXPORT_SYMBOL(iowrite64_lo_hi);
 EXPORT_SYMBOL(iowrite64_hi_lo);
 EXPORT_SYMBOL(ioread8_rep);
 EXPORT_SYMBOL(ioread16_rep);

[PATCH 5.10 019/121] btrfs: send: in case of IO error log it

[Greg Kroah-Hartman]

From: Dāvis Mosāns <davispuh@gmail.com>

commit 2e7be9db125a0bf940c5d65eb5c40d8700f738b5 upstream.

Currently if we get IO error while doing send then we abort without
logging information about which file caused issue.  So log it to help
with debugging.

CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Dāvis Mosāns <davispuh@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/send.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -5006,6 +5006,10 @@ static int put_file_data(struct send_ctx
 			lock_page(page);
 			if (!PageUptodate(page)) {
 				unlock_page(page);
+				btrfs_err(fs_info,
+			"send: IO error at offset %llu for inode %llu root %llu",
+					page_offset(page), sctx->cur_ino,
+					sctx->send_root->root_key.objectid);
 				put_page(page);
 				ret = -EIO;
 				break;

[PATCH 5.10 020/121] platform/x86: touchscreen_dmi: Add info for the RWC NANOTE P8 AY07J 2-in-1

[Greg Kroah-Hartman]

From: Yuka Kawajiri <yukx00@gmail.com>

[ Upstream commit 512eb73cfd1208898cf10cb06094e0ee0bb53b58 ]

Add touchscreen info for RWC NANOTE P8 (AY07J) 2-in-1.

Signed-off-by: Yuka Kawajiri <yukx00@gmail.com>
Link: https://lore.kernel.org/r/20220111154019.4599-1-yukx00@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/touchscreen_dmi.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 59b7e90cd5875..ab6a9369649db 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -756,6 +756,21 @@ static const struct ts_dmi_data predia_basic_data = {
 	.properties	= predia_basic_props,
 };
 
+static const struct property_entry rwc_nanote_p8_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 46),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1728),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-rwc-nanote-p8.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data rwc_nanote_p8_data = {
+	.acpi_name = "MSSL1680:00",
+	.properties = rwc_nanote_p8_props,
+};
+
 static const struct property_entry schneider_sct101ctm_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1715),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
@@ -1326,6 +1341,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_EXACT_MATCH(DMI_BOARD_NAME, "0E57"),
 		},
 	},
+	{
+		/* RWC NANOTE P8 */
+		.driver_data = (void *)&rwc_nanote_p8_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Default string"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AY07J"),
+			DMI_MATCH(DMI_PRODUCT_SKU, "0001")
+		},
+	},
 	{
 		/* Schneider SCT101CTM */
 		.driver_data = (void *)&schneider_sct101ctm_data,
-- 
2.34.1

[PATCH 5.10 021/121] platform/x86: ISST: Fix possible circular locking dependency detected

[Greg Kroah-Hartman]

From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

[ Upstream commit 17da2d5f93692086dd096a975225ffd5622d0bf8 ]

As reported:

[  256.104522] ======================================================
[  256.113783] WARNING: possible circular locking dependency detected
[  256.120093] 5.16.0-rc6-yocto-standard+ #99 Not tainted
[  256.125362] ------------------------------------------------------
[  256.131673] intel-speed-sel/844 is trying to acquire lock:
[  256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common]
[  256.147171]
[  256.147171] but task is already holding lock:
[  256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170
[  256.160407]
[  256.160407] which lock already depends on the new lock.
[  256.160407]
[  256.168712]
[  256.168712] the existing dependency chain (in reverse order) is:
[  256.176327]
[  256.176327] -> #1 (misc_mtx){+.+.}-{3:3}:
[  256.181946]        lock_acquire+0x1e6/0x330
[  256.186265]        __mutex_lock+0x9b/0x9b0
[  256.190497]        mutex_lock_nested+0x1b/0x20
[  256.195075]        misc_register+0x32/0x1a0
[  256.199390]        isst_if_cdev_register+0x65/0x180 [isst_if_common]
[  256.205878]        isst_if_probe+0x144/0x16e [isst_if_mmio]
...
[  256.241976]
[  256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}:
[  256.248552]        validate_chain+0xbc6/0x1750
[  256.253131]        __lock_acquire+0x88c/0xc10
[  256.257618]        lock_acquire+0x1e6/0x330
[  256.261933]        __mutex_lock+0x9b/0x9b0
[  256.266165]        mutex_lock_nested+0x1b/0x20
[  256.270739]        isst_if_open+0x18/0x90 [isst_if_common]
[  256.276356]        misc_open+0x100/0x170
[  256.280409]        chrdev_open+0xa5/0x1e0
...

The call sequence suggested that misc_device /dev file can be opened
before misc device is yet to be registered, which is done only once.

Here punit_misc_dev_lock was used as common lock, to protect the
registration by multiple ISST HW drivers, one time setup, prevent
duplicate registry of misc device and prevent load/unload when device
is open.

We can split into locks:
- One which just prevent duplicate call to misc_register() and one
time setup. Also never call again if the misc_register() failed or
required one time setup is failed. This lock is not shared with
any misc device callbacks.

- The other lock protects registry, load and unload of HW drivers.

Sequence in isst_if_cdev_register()
- Register callbacks under punit_misc_dev_open_lock
- Call isst_misc_reg() which registers misc_device on the first
registry which is under punit_misc_dev_reg_lock, which is not
shared with callbacks.

Sequence in isst_if_cdev_unregister
Just opposite of isst_if_cdev_register

Reported-and-tested-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220112022521.54669-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../intel_speed_select_if/isst_if_common.c    | 97 ++++++++++++-------
 1 file changed, 63 insertions(+), 34 deletions(-)

diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_common.c b/drivers/platform/x86/intel_speed_select_if/isst_if_common.c
index 0c2aa22c7a12e..407afafc7e83f 100644
--- a/drivers/platform/x86/intel_speed_select_if/isst_if_common.c
+++ b/drivers/platform/x86/intel_speed_select_if/isst_if_common.c
@@ -532,7 +532,10 @@ static long isst_if_def_ioctl(struct file *file, unsigned int cmd,
 	return ret;
 }
 
-static DEFINE_MUTEX(punit_misc_dev_lock);
+/* Lock to prevent module registration when already opened by user space */
+static DEFINE_MUTEX(punit_misc_dev_open_lock);
+/* Lock to allow one share misc device for all ISST interace */
+static DEFINE_MUTEX(punit_misc_dev_reg_lock);
 static int misc_usage_count;
 static int misc_device_ret;
 static int misc_device_open;
@@ -542,7 +545,7 @@ static int isst_if_open(struct inode *inode, struct file *file)
 	int i, ret = 0;
 
 	/* Fail open, if a module is going away */
-	mutex_lock(&punit_misc_dev_lock);
+	mutex_lock(&punit_misc_dev_open_lock);
 	for (i = 0; i < ISST_IF_DEV_MAX; ++i) {
 		struct isst_if_cmd_cb *cb = &punit_callbacks[i];
 
@@ -564,7 +567,7 @@ static int isst_if_open(struct inode *inode, struct file *file)
 	} else {
 		misc_device_open++;
 	}
-	mutex_unlock(&punit_misc_dev_lock);
+	mutex_unlock(&punit_misc_dev_open_lock);
 
 	return ret;
 }
@@ -573,7 +576,7 @@ static int isst_if_relase(struct inode *inode, struct file *f)
 {
 	int i;
 
-	mutex_lock(&punit_misc_dev_lock);
+	mutex_lock(&punit_misc_dev_open_lock);
 	misc_device_open--;
 	for (i = 0; i < ISST_IF_DEV_MAX; ++i) {
 		struct isst_if_cmd_cb *cb = &punit_callbacks[i];
@@ -581,7 +584,7 @@ static int isst_if_relase(struct inode *inode, struct file *f)
 		if (cb->registered)
 			module_put(cb->owner);
 	}
-	mutex_unlock(&punit_misc_dev_lock);
+	mutex_unlock(&punit_misc_dev_open_lock);
 
 	return 0;
 }
@@ -598,6 +601,43 @@ static struct miscdevice isst_if_char_driver = {
 	.fops		= &isst_if_char_driver_ops,
 };
 
+static int isst_misc_reg(void)
+{
+	mutex_lock(&punit_misc_dev_reg_lock);
+	if (misc_device_ret)
+		goto unlock_exit;
+
+	if (!misc_usage_count) {
+		misc_device_ret = isst_if_cpu_info_init();
+		if (misc_device_ret)
+			goto unlock_exit;
+
+		misc_device_ret = misc_register(&isst_if_char_driver);
+		if (misc_device_ret) {
+			isst_if_cpu_info_exit();
+			goto unlock_exit;
+		}
+	}
+	misc_usage_count++;
+
+unlock_exit:
+	mutex_unlock(&punit_misc_dev_reg_lock);
+
+	return misc_device_ret;
+}
+
+static void isst_misc_unreg(void)
+{
+	mutex_lock(&punit_misc_dev_reg_lock);
+	if (misc_usage_count)
+		misc_usage_count--;
+	if (!misc_usage_count && !misc_device_ret) {
+		misc_deregister(&isst_if_char_driver);
+		isst_if_cpu_info_exit();
+	}
+	mutex_unlock(&punit_misc_dev_reg_lock);
+}
+
 /**
  * isst_if_cdev_register() - Register callback for IOCTL
  * @device_type: The device type this callback handling.
@@ -615,38 +655,31 @@ static struct miscdevice isst_if_char_driver = {
  */
 int isst_if_cdev_register(int device_type, struct isst_if_cmd_cb *cb)
 {
-	if (misc_device_ret)
-		return misc_device_ret;
+	int ret;
 
 	if (device_type >= ISST_IF_DEV_MAX)
 		return -EINVAL;
 
-	mutex_lock(&punit_misc_dev_lock);
+	mutex_lock(&punit_misc_dev_open_lock);
+	/* Device is already open, we don't want to add new callbacks */
 	if (misc_device_open) {
-		mutex_unlock(&punit_misc_dev_lock);
+		mutex_unlock(&punit_misc_dev_open_lock);
 		return -EAGAIN;
 	}
-	if (!misc_usage_count) {
-		int ret;
-
-		misc_device_ret = misc_register(&isst_if_char_driver);
-		if (misc_device_ret)
-			goto unlock_exit;
-
-		ret = isst_if_cpu_info_init();
-		if (ret) {
-			misc_deregister(&isst_if_char_driver);
-			misc_device_ret = ret;
-			goto unlock_exit;
-		}
-	}
 	memcpy(&punit_callbacks[device_type], cb, sizeof(*cb));
 	punit_callbacks[device_type].registered = 1;
-	misc_usage_count++;
-unlock_exit:
-	mutex_unlock(&punit_misc_dev_lock);
+	mutex_unlock(&punit_misc_dev_open_lock);
 
-	return misc_device_ret;
+	ret = isst_misc_reg();
+	if (ret) {
+		/*
+		 * No need of mutex as the misc device register failed
+		 * as no one can open device yet. Hence no contention.
+		 */
+		punit_callbacks[device_type].registered = 0;
+		return ret;
+	}
+	return 0;
 }
 EXPORT_SYMBOL_GPL(isst_if_cdev_register);
 
@@ -661,16 +694,12 @@ EXPORT_SYMBOL_GPL(isst_if_cdev_register);
  */
 void isst_if_cdev_unregister(int device_type)
 {
-	mutex_lock(&punit_misc_dev_lock);
-	misc_usage_count--;
+	isst_misc_unreg();
+	mutex_lock(&punit_misc_dev_open_lock);
 	punit_callbacks[device_type].registered = 0;
 	if (device_type == ISST_IF_DEV_MBOX)
 		isst_delete_hash();
-	if (!misc_usage_count && !misc_device_ret) {
-		misc_deregister(&isst_if_char_driver);
-		isst_if_cpu_info_exit();
-	}
-	mutex_unlock(&punit_misc_dev_lock);
+	mutex_unlock(&punit_misc_dev_open_lock);
 }
 EXPORT_SYMBOL_GPL(isst_if_cdev_unregister);
 
-- 
2.34.1

[PATCH 5.10 022/121] selftests: rtc: Increase test timeout so that all tests run

[Greg Kroah-Hartman]

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ]

The timeout setting for the rtc kselftest is currently 90 seconds. This
setting is used by the kselftest runner to stop running a test if it
takes longer than the assigned value.

However, two of the test cases inside rtc set alarms. These alarms are
set to the next beginning of the minute, so each of these test cases may
take up to, in the worst case, 60 seconds.

In order to allow for all test cases in rtc to run, even in the worst
case, when using the kselftest runner, the timeout value should be
increased to at least 120. Set it to 180, so there's some additional
slack.

Correct operation can be tested by running the following command right
after the start of a minute (low second count), and checking that all
test cases run:

	./run_kselftest.sh -c rtc

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/rtc/settings | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/rtc/settings b/tools/testing/selftests/rtc/settings
index ba4d85f74cd6b..a953c96aa16e1 100644
--- a/tools/testing/selftests/rtc/settings
+++ b/tools/testing/selftests/rtc/settings
@@ -1 +1 @@
-timeout=90
+timeout=180
-- 
2.34.1

[PATCH 5.10 023/121] kselftest: signal all child processes

[Greg Kroah-Hartman]

From: Li Zhijian <lizhijian@cn.fujitsu.com>

[ Upstream commit 92d25637a3a45904292c93f1863c6bbda4e3e38f ]

We have some many cases that will create child process as well, such as
pidfd_wait. Previously, we will signal/kill the parent process when it
is time out, but this signal will not be sent to its child process. In
such case, if child process doesn't terminate itself, ksefltest framework
will hang forever.

Here we group all its child processes so that kill() can signal all of
them in timeout.

Fixed change log: Shuah Khan <skhan@linuxfoundation.org>

Suggested-by: yang xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/kselftest_harness.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index 5ecb9718e1616..3e7b2e521cde4 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -871,7 +871,8 @@ static void __timeout_handler(int sig, siginfo_t *info, void *ucontext)
 	}
 
 	t->timed_out = true;
-	kill(t->pid, SIGKILL);
+	// signal process group
+	kill(-(t->pid), SIGKILL);
 }
 
 void __wait_for_test(struct __test_metadata *t)
@@ -981,6 +982,7 @@ void __run_test(struct __fixture_metadata *f,
 		ksft_print_msg("ERROR SPAWNING TEST CHILD\n");
 		t->passed = 0;
 	} else if (t->pid == 0) {
+		setpgrp();
 		t->fn(t, variant);
 		if (t->skip)
 			_exit(255);
-- 
2.34.1

[PATCH 5.10 024/121] net: ieee802154: at86rf230: Stop leaking skbs

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit e5ce576d45bf72fd0e3dc37eff897bfcc488f6a9 ]

Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. In the Tx case we then leak
the skb structure.

Free the skb structure upon error before returning when appropriate.

As the 'is_tx = 0' cannot be moved in the complete handler because of a
possible race between the delay in switching to STATE_RX_AACK_ON and a
new interrupt, we introduce an intermediate 'was_tx' boolean just for
this purpose.

There is no Fixes tag applying here, many changes have been made on this
area and the issue kind of always existed.

Suggested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ieee802154/at86rf230.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 7d67f41387f55..4f5ef8a9a9a87 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -100,6 +100,7 @@ struct at86rf230_local {
 	unsigned long cal_timeout;
 	bool is_tx;
 	bool is_tx_from_off;
+	bool was_tx;
 	u8 tx_retry;
 	struct sk_buff *tx_skb;
 	struct at86rf230_state_change tx;
@@ -343,7 +344,11 @@ at86rf230_async_error_recover_complete(void *context)
 	if (ctx->free)
 		kfree(ctx);
 
-	ieee802154_wake_queue(lp->hw);
+	if (lp->was_tx) {
+		lp->was_tx = 0;
+		dev_kfree_skb_any(lp->tx_skb);
+		ieee802154_wake_queue(lp->hw);
+	}
 }
 
 static void
@@ -352,7 +357,11 @@ at86rf230_async_error_recover(void *context)
 	struct at86rf230_state_change *ctx = context;
 	struct at86rf230_local *lp = ctx->lp;
 
-	lp->is_tx = 0;
+	if (lp->is_tx) {
+		lp->was_tx = 1;
+		lp->is_tx = 0;
+	}
+
 	at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON,
 				     at86rf230_async_error_recover_complete);
 }
-- 
2.34.1

[PATCH 5.10 025/121] selftests/zram: Skip max_comp_streams interface on newer kernel

[Greg Kroah-Hartman]

From: Yang Xu <xuyang2018.jy@fujitsu.com>

[ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ]

Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram
has switched to per-cpu streams. Even kernel still keep this interface for
some reasons, but writing to max_comp_stream doesn't take any effect. So
skip it on newer kernel ie 4.7.

The code that comparing kernel version is from xfstests testsuite ext4/053.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh
index 6f872f266fd11..f47fc0f27e99e 100755
--- a/tools/testing/selftests/zram/zram_lib.sh
+++ b/tools/testing/selftests/zram/zram_lib.sh
@@ -11,6 +11,9 @@ dev_mounted=-1
 
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
+kernel_version=`uname -r | cut -d'.' -f1,2`
+kernel_major=${kernel_version%.*}
+kernel_minor=${kernel_version#*.}
 
 trap INT
 
@@ -25,6 +28,20 @@ check_prereqs()
 	fi
 }
 
+kernel_gte()
+{
+	major=${1%.*}
+	minor=${1#*.}
+
+	if [ $kernel_major -gt $major ]; then
+		return 0
+	elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then
+		return 0
+	fi
+
+	return 1
+}
+
 zram_cleanup()
 {
 	echo "zram cleanup"
@@ -86,6 +103,13 @@ zram_max_streams()
 {
 	echo "set max_comp_streams to zram device(s)"
 
+	kernel_gte 4.7
+	if [ $? -eq 0 ]; then
+		echo "The device attribute max_comp_streams was"\
+		               "deprecated in 4.7"
+		return 0
+	fi
+
 	local i=0
 	for max_s in $zram_max_streams; do
 		local sys_path="/sys/block/zram${i}/max_comp_streams"
-- 
2.34.1

[PATCH 5.10 026/121] selftests/zram01.sh: Fix compression ratio calculation

[Greg Kroah-Hartman]

From: Yang Xu <xuyang2018.jy@fujitsu.com>

[ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ]

zram01 uses `free -m` to measure zram memory usage. The results are no
sense because they are polluted by all running processes on the system.

We Should only calculate the free memory delta for the current process.
So use the third field of /sys/block/zram<id>/mm_stat to measure memory
usage instead. The file is available since kernel 4.1.

orig_data_size(first): uncompressed size of data stored in this disk.
compr_data_size(second): compressed size of data stored in this disk
mem_used_total(third): the amount of memory allocated for this disk

Also remove useless zram cleanup call in zram_fill_fs and so we don't
need to cleanup zram twice if fails.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/zram/zram01.sh | 30 +++++++-------------------
 1 file changed, 8 insertions(+), 22 deletions(-)

diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh
index 114863d9fb876..e9e9eb777e2c7 100755
--- a/tools/testing/selftests/zram/zram01.sh
+++ b/tools/testing/selftests/zram/zram01.sh
@@ -33,8 +33,6 @@ zram_algs="lzo"
 
 zram_fill_fs()
 {
-	local mem_free0=$(free -m | awk 'NR==2 {print $4}')
-
 	for i in $(seq 0 $(($dev_num - 1))); do
 		echo "fill zram$i..."
 		local b=0
@@ -45,29 +43,17 @@ zram_fill_fs()
 			b=$(($b + 1))
 		done
 		echo "zram$i can be filled with '$b' KB"
-	done
 
-	local mem_free1=$(free -m | awk 'NR==2 {print $4}')
-	local used_mem=$(($mem_free0 - $mem_free1))
+		local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"`
+		local v=$((100 * 1024 * $b / $mem_used_total))
+		if [ "$v" -lt 100 ]; then
+			 echo "FAIL compression ratio: 0.$v:1"
+			 ERR_CODE=-1
+			 return
+		fi
 
-	local total_size=0
-	for sm in $zram_sizes; do
-		local s=$(echo $sm | sed 's/M//')
-		total_size=$(($total_size + $s))
+		echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK"
 	done
-
-	echo "zram used ${used_mem}M, zram disk sizes ${total_size}M"
-
-	local v=$((100 * $total_size / $used_mem))
-
-	if [ "$v" -lt 100 ]; then
-		echo "FAIL compression ratio: 0.$v:1"
-		ERR_CODE=-1
-		zram_cleanup
-		return
-	fi
-
-	echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK"
 }
 
 check_prereqs
-- 
2.34.1

[PATCH 5.10 027/121] selftests/zram: Adapt the situation that /dev/zram0 is being used

[Greg Kroah-Hartman]

From: Yang Xu <xuyang2018.jy@fujitsu.com>

[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ]

If zram-generator package is installed and works, then we can not remove
zram module because zram swap is being used. This case needs a clean zram
environment, change this test by using hot_add/hot_remove interface. So
even zram device is being used, we still can add zram device and remove
them in cleanup.

The two interface was introduced since kernel commit 6566d1a32bf7("zram:
add dynamic device add/remove functionality") in v4.2-rc1. If kernel
supports these two interface, we use hot_add/hot_remove to slove this
problem, if not, just check whether zram is being used or built in, then
skip it on old kernel.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/zram/zram.sh     |  15 +---
 tools/testing/selftests/zram/zram01.sh   |   3 +-
 tools/testing/selftests/zram/zram02.sh   |   1 -
 tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++----------
 4 files changed, 66 insertions(+), 63 deletions(-)

diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh
index 232e958ec4547..b0b91d9b0dc21 100755
--- a/tools/testing/selftests/zram/zram.sh
+++ b/tools/testing/selftests/zram/zram.sh
@@ -2,9 +2,6 @@
 # SPDX-License-Identifier: GPL-2.0
 TCID="zram.sh"
 
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
 . ./zram_lib.sh
 
 run_zram () {
@@ -18,14 +15,4 @@ echo ""
 
 check_prereqs
 
-# check zram module exists
-MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko
-if [ -f $MODULE_PATH ]; then
-	run_zram
-elif [ -b /dev/zram0 ]; then
-	run_zram
-else
-	echo "$TCID : No zram.ko module or /dev/zram0 device file not found"
-	echo "$TCID : CONFIG_ZRAM is not set"
-	exit $ksft_skip
-fi
+run_zram
diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh
index e9e9eb777e2c7..8f4affe34f3e4 100755
--- a/tools/testing/selftests/zram/zram01.sh
+++ b/tools/testing/selftests/zram/zram01.sh
@@ -33,7 +33,7 @@ zram_algs="lzo"
 
 zram_fill_fs()
 {
-	for i in $(seq 0 $(($dev_num - 1))); do
+	for i in $(seq $dev_start $dev_end); do
 		echo "fill zram$i..."
 		local b=0
 		while [ true ]; do
@@ -67,7 +67,6 @@ zram_mount
 
 zram_fill_fs
 zram_cleanup
-zram_unload
 
 if [ $ERR_CODE -ne 0 ]; then
 	echo "$TCID : [FAIL]"
diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh
index e83b404807c09..2418b0c4ed136 100755
--- a/tools/testing/selftests/zram/zram02.sh
+++ b/tools/testing/selftests/zram/zram02.sh
@@ -36,7 +36,6 @@ zram_set_memlimit
 zram_makeswap
 zram_swapoff
 zram_cleanup
-zram_unload
 
 if [ $ERR_CODE -ne 0 ]; then
 	echo "$TCID : [FAIL]"
diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh
index f47fc0f27e99e..21ec1966de76c 100755
--- a/tools/testing/selftests/zram/zram_lib.sh
+++ b/tools/testing/selftests/zram/zram_lib.sh
@@ -5,10 +5,12 @@
 # Author: Alexey Kodanev <alexey.kodanev@oracle.com>
 # Modified: Naresh Kamboju <naresh.kamboju@linaro.org>
 
-MODULE=0
 dev_makeswap=-1
 dev_mounted=-1
-
+dev_start=0
+dev_end=-1
+module_load=-1
+sys_control=-1
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
 kernel_version=`uname -r | cut -d'.' -f1,2`
@@ -46,57 +48,72 @@ zram_cleanup()
 {
 	echo "zram cleanup"
 	local i=
-	for i in $(seq 0 $dev_makeswap); do
+	for i in $(seq $dev_start $dev_makeswap); do
 		swapoff /dev/zram$i
 	done
 
-	for i in $(seq 0 $dev_mounted); do
+	for i in $(seq $dev_start $dev_mounted); do
 		umount /dev/zram$i
 	done
 
-	for i in $(seq 0 $(($dev_num - 1))); do
+	for i in $(seq $dev_start $dev_end); do
 		echo 1 > /sys/block/zram${i}/reset
 		rm -rf zram$i
 	done
 
-}
+	if [ $sys_control -eq 1 ]; then
+		for i in $(seq $dev_start $dev_end); do
+			echo $i > /sys/class/zram-control/hot_remove
+		done
+	fi
 
-zram_unload()
-{
-	if [ $MODULE -ne 0 ] ; then
-		echo "zram rmmod zram"
+	if [ $module_load -eq 1 ]; then
 		rmmod zram > /dev/null 2>&1
 	fi
 }
 
 zram_load()
 {
-	# check zram module exists
-	MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko
-	if [ -f $MODULE_PATH ]; then
-		MODULE=1
-		echo "create '$dev_num' zram device(s)"
-		modprobe zram num_devices=$dev_num
-		if [ $? -ne 0 ]; then
-			echo "failed to insert zram module"
-			exit 1
-		fi
-
-		dev_num_created=$(ls /dev/zram* | wc -w)
+	echo "create '$dev_num' zram device(s)"
+
+	# zram module loaded, new kernel
+	if [ -d "/sys/class/zram-control" ]; then
+		echo "zram modules already loaded, kernel supports" \
+			"zram-control interface"
+		dev_start=$(ls /dev/zram* | wc -w)
+		dev_end=$(($dev_start + $dev_num - 1))
+		sys_control=1
+
+		for i in $(seq $dev_start $dev_end); do
+			cat /sys/class/zram-control/hot_add > /dev/null
+		done
+
+		echo "all zram devices (/dev/zram$dev_start~$dev_end" \
+			"successfully created"
+		return 0
+	fi
 
-		if [ "$dev_num_created" -ne "$dev_num" ]; then
-			echo "unexpected num of devices: $dev_num_created"
-			ERR_CODE=-1
+	# detect old kernel or built-in
+	modprobe zram num_devices=$dev_num
+	if [ ! -d "/sys/class/zram-control" ]; then
+		if grep -q '^zram' /proc/modules; then
+			rmmod zram > /dev/null 2>&1
+			if [ $? -ne 0 ]; then
+				echo "zram module is being used on old kernel" \
+					"without zram-control interface"
+				exit $ksft_skip
+			fi
 		else
-			echo "zram load module successful"
+			echo "test needs CONFIG_ZRAM=m on old kernel without" \
+				"zram-control interface"
+			exit $ksft_skip
 		fi
-	elif [ -b /dev/zram0 ]; then
-		echo "/dev/zram0 device file found: OK"
-	else
-		echo "ERROR: No zram.ko module or no /dev/zram0 device found"
-		echo "$TCID : CONFIG_ZRAM is not set"
-		exit 1
+		modprobe zram num_devices=$dev_num
 	fi
+
+	module_load=1
+	dev_end=$(($dev_num - 1))
+	echo "all zram devices (/dev/zram0~$dev_end) successfully created"
 }
 
 zram_max_streams()
@@ -110,7 +127,7 @@ zram_max_streams()
 		return 0
 	fi
 
-	local i=0
+	local i=$dev_start
 	for max_s in $zram_max_streams; do
 		local sys_path="/sys/block/zram${i}/max_comp_streams"
 		echo $max_s > $sys_path || \
@@ -122,7 +139,7 @@ zram_max_streams()
 			echo "FAIL can't set max_streams '$max_s', get $max_stream"
 
 		i=$(($i + 1))
-		echo "$sys_path = '$max_streams' ($i/$dev_num)"
+		echo "$sys_path = '$max_streams'"
 	done
 
 	echo "zram max streams: OK"
@@ -132,15 +149,16 @@ zram_compress_alg()
 {
 	echo "test that we can set compression algorithm"
 
-	local algs=$(cat /sys/block/zram0/comp_algorithm)
+	local i=$dev_start
+	local algs=$(cat /sys/block/zram${i}/comp_algorithm)
 	echo "supported algs: $algs"
-	local i=0
+
 	for alg in $zram_algs; do
 		local sys_path="/sys/block/zram${i}/comp_algorithm"
 		echo "$alg" >	$sys_path || \
 			echo "FAIL can't set '$alg' to $sys_path"
 		i=$(($i + 1))
-		echo "$sys_path = '$alg' ($i/$dev_num)"
+		echo "$sys_path = '$alg'"
 	done
 
 	echo "zram set compression algorithm: OK"
@@ -149,14 +167,14 @@ zram_compress_alg()
 zram_set_disksizes()
 {
 	echo "set disk size to zram device(s)"
-	local i=0
+	local i=$dev_start
 	for ds in $zram_sizes; do
 		local sys_path="/sys/block/zram${i}/disksize"
 		echo "$ds" >	$sys_path || \
 			echo "FAIL can't set '$ds' to $sys_path"
 
 		i=$(($i + 1))
-		echo "$sys_path = '$ds' ($i/$dev_num)"
+		echo "$sys_path = '$ds'"
 	done
 
 	echo "zram set disksizes: OK"
@@ -166,14 +184,14 @@ zram_set_memlimit()
 {
 	echo "set memory limit to zram device(s)"
 
-	local i=0
+	local i=$dev_start
 	for ds in $zram_mem_limits; do
 		local sys_path="/sys/block/zram${i}/mem_limit"
 		echo "$ds" >	$sys_path || \
 			echo "FAIL can't set '$ds' to $sys_path"
 
 		i=$(($i + 1))
-		echo "$sys_path = '$ds' ($i/$dev_num)"
+		echo "$sys_path = '$ds'"
 	done
 
 	echo "zram set memory limit: OK"
@@ -182,8 +200,8 @@ zram_set_memlimit()
 zram_makeswap()
 {
 	echo "make swap with zram device(s)"
-	local i=0
-	for i in $(seq 0 $(($dev_num - 1))); do
+	local i=$dev_start
+	for i in $(seq $dev_start $dev_end); do
 		mkswap /dev/zram$i > err.log 2>&1
 		if [ $? -ne 0 ]; then
 			cat err.log
@@ -206,7 +224,7 @@ zram_makeswap()
 zram_swapoff()
 {
 	local i=
-	for i in $(seq 0 $dev_makeswap); do
+	for i in $(seq $dev_start $dev_end); do
 		swapoff /dev/zram$i > err.log 2>&1
 		if [ $? -ne 0 ]; then
 			cat err.log
@@ -220,7 +238,7 @@ zram_swapoff()
 
 zram_makefs()
 {
-	local i=0
+	local i=$dev_start
 	for fs in $zram_filesystems; do
 		# if requested fs not supported default it to ext2
 		which mkfs.$fs > /dev/null 2>&1 || fs=ext2
@@ -239,7 +257,7 @@ zram_makefs()
 zram_mount()
 {
 	local i=0
-	for i in $(seq 0 $(($dev_num - 1))); do
+	for i in $(seq $dev_start $dev_end); do
 		echo "mount /dev/zram$i"
 		mkdir zram$i
 		mount /dev/zram$i zram$i > /dev/null || \
-- 
2.34.1

[PATCH 5.10 028/121] selftests: openat2: Print also errno in failure messages

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit e051cdf655fa016692008a446a060eff06222bb5 ]

In E_func() macro, on error, print also errno in order to aid debugging.

Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/openat2/helpers.h | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/openat2/helpers.h b/tools/testing/selftests/openat2/helpers.h
index a6ea27344db2d..ad5d0ba5b6ce9 100644
--- a/tools/testing/selftests/openat2/helpers.h
+++ b/tools/testing/selftests/openat2/helpers.h
@@ -62,11 +62,12 @@ bool needs_openat2(const struct open_how *how);
 					(similar to chroot(2)). */
 #endif /* RESOLVE_IN_ROOT */
 
-#define E_func(func, ...)						\
-	do {								\
-		if (func(__VA_ARGS__) < 0)				\
-			ksft_exit_fail_msg("%s:%d %s failed\n", \
-					   __FILE__, __LINE__, #func);\
+#define E_func(func, ...)						      \
+	do {								      \
+		errno = 0;						      \
+		if (func(__VA_ARGS__) < 0)				      \
+			ksft_exit_fail_msg("%s:%d %s failed - errno:%d\n",    \
+					   __FILE__, __LINE__, #func, errno); \
 	} while (0)
 
 #define E_asprintf(...)		E_func(asprintf,	__VA_ARGS__)
-- 
2.34.1

[PATCH 5.10 029/121] selftests: openat2: Add missing dependency in Makefile

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit ea3396725aa143dd42fe388cb67e44c90d2fb719 ]

Add a dependency on header helpers.h to the main target; while at that add
to helpers.h also a missing include for bool types.

Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/openat2/Makefile  | 2 +-
 tools/testing/selftests/openat2/helpers.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/openat2/Makefile b/tools/testing/selftests/openat2/Makefile
index 4b93b1417b862..843ba56d8e49e 100644
--- a/tools/testing/selftests/openat2/Makefile
+++ b/tools/testing/selftests/openat2/Makefile
@@ -5,4 +5,4 @@ TEST_GEN_PROGS := openat2_test resolve_test rename_attack_test
 
 include ../lib.mk
 
-$(TEST_GEN_PROGS): helpers.c
+$(TEST_GEN_PROGS): helpers.c helpers.h
diff --git a/tools/testing/selftests/openat2/helpers.h b/tools/testing/selftests/openat2/helpers.h
index ad5d0ba5b6ce9..7056340b9339e 100644
--- a/tools/testing/selftests/openat2/helpers.h
+++ b/tools/testing/selftests/openat2/helpers.h
@@ -9,6 +9,7 @@
 
 #define _GNU_SOURCE
 #include <stdint.h>
+#include <stdbool.h>
 #include <errno.h>
 #include <linux/types.h>
 #include "../kselftest.h"
-- 
2.34.1

[PATCH 5.10 030/121] selftests: openat2: Skip testcases that fail with EOPNOTSUPP

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit ac9e0a250bb155078601a5b999aab05f2a04d1ab ]

Skip testcases that fail since the requested valid flags combination is not
supported by the underlying filesystem.

Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/openat2/openat2_test.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/openat2/openat2_test.c b/tools/testing/selftests/openat2/openat2_test.c
index b386367c606b1..453152b58e7f0 100644
--- a/tools/testing/selftests/openat2/openat2_test.c
+++ b/tools/testing/selftests/openat2/openat2_test.c
@@ -244,6 +244,16 @@ void test_openat2_flags(void)
 		unlink(path);
 
 		fd = sys_openat2(AT_FDCWD, path, &test->how);
+		if (fd < 0 && fd == -EOPNOTSUPP) {
+			/*
+			 * Skip the testcase if it failed because not supported
+			 * by FS. (e.g. a valid O_TMPFILE combination on NFS)
+			 */
+			ksft_test_result_skip("openat2 with %s fails with %d (%s)\n",
+					      test->name, fd, strerror(-fd));
+			goto next;
+		}
+
 		if (test->err >= 0)
 			failed = (fd < 0);
 		else
@@ -288,7 +298,7 @@ void test_openat2_flags(void)
 		else
 			resultfn("openat2 with %s fails with %d (%s)\n",
 				 test->name, test->err, strerror(-test->err));
-
+next:
 		free(fdpath);
 		fflush(stdout);
 	}
-- 
2.34.1

[PATCH 5.10 031/121] selftests: skip mincore.check_file_mmap when fs lacks needed support

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit dae1d8ac31896988e7313384c0370176a75e9b45 ]

Report mincore.check_file_mmap as SKIP instead of FAIL if the underlying
filesystem lacks support of O_TMPFILE or fallocate since such failures
are not really related to mincore functionality.

Cc: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/mincore/mincore_selftest.c      | 20 +++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/mincore/mincore_selftest.c b/tools/testing/selftests/mincore/mincore_selftest.c
index 5a1e85ff5d32a..2cf6f2f277ab8 100644
--- a/tools/testing/selftests/mincore/mincore_selftest.c
+++ b/tools/testing/selftests/mincore/mincore_selftest.c
@@ -208,15 +208,21 @@ TEST(check_file_mmap)
 
 	errno = 0;
 	fd = open(".", O_TMPFILE | O_RDWR, 0600);
-	ASSERT_NE(-1, fd) {
-		TH_LOG("Can't create temporary file: %s",
-			strerror(errno));
+	if (fd < 0) {
+		ASSERT_EQ(errno, EOPNOTSUPP) {
+			TH_LOG("Can't create temporary file: %s",
+			       strerror(errno));
+		}
+		SKIP(goto out_free, "O_TMPFILE not supported by filesystem.");
 	}
 	errno = 0;
 	retval = fallocate(fd, 0, 0, FILE_SIZE);
-	ASSERT_EQ(0, retval) {
-		TH_LOG("Error allocating space for the temporary file: %s",
-			strerror(errno));
+	if (retval) {
+		ASSERT_EQ(errno, EOPNOTSUPP) {
+			TH_LOG("Error allocating space for the temporary file: %s",
+			       strerror(errno));
+		}
+		SKIP(goto out_close, "fallocate not supported by filesystem.");
 	}
 
 	/*
@@ -272,7 +278,9 @@ TEST(check_file_mmap)
 	}
 
 	munmap(addr, FILE_SIZE);
+out_close:
 	close(fd);
+out_free:
 	free(vec);
 }
 
-- 
2.34.1

[PATCH 5.10 032/121] ax25: improve the incomplete fix to avoid UAF and NPD bugs

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 4e0f718daf97d47cf7dec122da1be970f145c809 ]

The previous commit 1ade48d0c27d ("ax25: NPD bug when detaching
AX25 device") introduce lock_sock() into ax25_kill_by_device to
prevent NPD bug. But the concurrency NPD or UAF bug will occur,
when lock_sock() or release_sock() dereferences the ax25_cb->sock.

The NULL pointer dereference bug can be shown as below:

ax25_kill_by_device()        | ax25_release()
                             |   ax25_destroy_socket()
                             |     ax25_cb_del()
  ...                        |     ...
                             |     ax25->sk=NULL;
  lock_sock(s->sk); //(1)    |
  s->ax25_dev = NULL;        |     ...
  release_sock(s->sk); //(2) |
  ...                        |

The root cause is that the sock is set to null before dereference
site (1) or (2). Therefore, this patch extracts the ax25_cb->sock
in advance, and uses ax25_list_lock to protect it, which can synchronize
with ax25_cb_del() and ensure the value of sock is not null before
dereference sites.

The concurrency UAF bug can be shown as below:

ax25_kill_by_device()        | ax25_release()
                             |   ax25_destroy_socket()
  ...                        |   ...
                             |   sock_put(sk); //FREE
  lock_sock(s->sk); //(1)    |
  s->ax25_dev = NULL;        |   ...
  release_sock(s->sk); //(2) |
  ...                        |

The root cause is that the sock is released before dereference
site (1) or (2). Therefore, this patch uses sock_hold() to increase
the refcount of sock and uses ax25_list_lock to protect it, which
can synchronize with ax25_cb_del() in ax25_destroy_socket() and
ensure the sock wil not be released before dereference sites.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ax25/af_ax25.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 5e84dce5ff7ae..23bd26057a828 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -77,6 +77,7 @@ static void ax25_kill_by_device(struct net_device *dev)
 {
 	ax25_dev *ax25_dev;
 	ax25_cb *s;
+	struct sock *sk;
 
 	if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL)
 		return;
@@ -85,13 +86,15 @@ static void ax25_kill_by_device(struct net_device *dev)
 again:
 	ax25_for_each(s, &ax25_list) {
 		if (s->ax25_dev == ax25_dev) {
+			sk = s->sk;
+			sock_hold(sk);
 			spin_unlock_bh(&ax25_list_lock);
-			lock_sock(s->sk);
+			lock_sock(sk);
 			s->ax25_dev = NULL;
-			release_sock(s->sk);
+			release_sock(sk);
 			ax25_disconnect(s, ENETUNREACH);
 			spin_lock_bh(&ax25_list_lock);
-
+			sock_put(sk);
 			/* The entry could have been deleted from the
 			 * list meanwhile and thus the next pointer is
 			 * no longer valid.  Play it safe and restart
-- 
2.34.1

[PATCH 5.10 033/121] vfs: make freeze_super abort when sync_filesystem returns error

[Greg Kroah-Hartman]

From: Darrick J. Wong <djwong@kernel.org>

[ Upstream commit 2719c7160dcfaae1f73a1c0c210ad3281c19022e ]

If we fail to synchronize the filesystem while preparing to freeze the
fs, abort the freeze.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/super.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/fs/super.c b/fs/super.c
index 20f1707807bbd..bae3fe80f852e 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -1667,11 +1667,9 @@ static void lockdep_sb_freeze_acquire(struct super_block *sb)
 		percpu_rwsem_acquire(sb->s_writers.rw_sem + level, 0, _THIS_IP_);
 }
 
-static void sb_freeze_unlock(struct super_block *sb)
+static void sb_freeze_unlock(struct super_block *sb, int level)
 {
-	int level;
-
-	for (level = SB_FREEZE_LEVELS - 1; level >= 0; level--)
+	for (level--; level >= 0; level--)
 		percpu_up_write(sb->s_writers.rw_sem + level);
 }
 
@@ -1742,7 +1740,14 @@ int freeze_super(struct super_block *sb)
 	sb_wait_write(sb, SB_FREEZE_PAGEFAULT);
 
 	/* All writers are done so after syncing there won't be dirty data */
-	sync_filesystem(sb);
+	ret = sync_filesystem(sb);
+	if (ret) {
+		sb->s_writers.frozen = SB_UNFROZEN;
+		sb_freeze_unlock(sb, SB_FREEZE_PAGEFAULT);
+		wake_up(&sb->s_writers.wait_unfrozen);
+		deactivate_locked_super(sb);
+		return ret;
+	}
 
 	/* Now wait for internal filesystem counter */
 	sb->s_writers.frozen = SB_FREEZE_FS;
@@ -1754,7 +1759,7 @@ int freeze_super(struct super_block *sb)
 			printk(KERN_ERR
 				"VFS:Filesystem freeze failed\n");
 			sb->s_writers.frozen = SB_UNFROZEN;
-			sb_freeze_unlock(sb);
+			sb_freeze_unlock(sb, SB_FREEZE_FS);
 			wake_up(&sb->s_writers.wait_unfrozen);
 			deactivate_locked_super(sb);
 			return ret;
@@ -1805,7 +1810,7 @@ static int thaw_super_locked(struct super_block *sb)
 	}
 
 	sb->s_writers.frozen = SB_UNFROZEN;
-	sb_freeze_unlock(sb);
+	sb_freeze_unlock(sb, SB_FREEZE_FS);
 out:
 	wake_up(&sb->s_writers.wait_unfrozen);
 	deactivate_locked_super(sb);
-- 
2.34.1

[PATCH 5.10 034/121] quota: make dquot_quota_sync return errors from ->sync_fs

[Greg Kroah-Hartman]

From: Darrick J. Wong <djwong@kernel.org>

[ Upstream commit dd5532a4994bfda0386eb2286ec00758cee08444 ]

Strangely, dquot_quota_sync ignores the return code from the ->sync_fs
call, which means that quotacalls like Q_SYNC never see the error.  This
doesn't seem right, so fix that.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 4f13734637660..09fb8459bb5ce 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -692,9 +692,14 @@ int dquot_quota_sync(struct super_block *sb, int type)
 	/* This is not very clever (and fast) but currently I don't know about
 	 * any other simple way of getting quota data to disk and we must get
 	 * them there for userspace to be visible... */
-	if (sb->s_op->sync_fs)
-		sb->s_op->sync_fs(sb, 1);
-	sync_blockdev(sb->s_bdev);
+	if (sb->s_op->sync_fs) {
+		ret = sb->s_op->sync_fs(sb, 1);
+		if (ret)
+			return ret;
+	}
+	ret = sync_blockdev(sb->s_bdev);
+	if (ret)
+		return ret;
 
 	/*
 	 * Now when everything is written we can discard the pagecache so
-- 
2.34.1

[PATCH 5.10 035/121] scsi: pm8001: Fix use-after-free for aborted TMF sas_task

[Greg Kroah-Hartman]

From: John Garry <john.garry@huawei.com>

[ Upstream commit 61f162aa4381845acbdc7f2be4dfb694d027c018 ]

Currently a use-after-free may occur if a TMF sas_task is aborted before we
handle the IO completion in mpi_ssp_completion(). The abort occurs due to
timeout.

When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the
sas_task is freed in pm8001_exec_internal_tmf_task().

However, if the I/O completion occurs later, the I/O completion still
thinks that the sas_task is available. Fix this by clearing the ccb->task
if the TMF times out - the I/O completion handler does nothing if this
pointer is cleared.

Link: https://lore.kernel.org/r/1643289172-165636-3-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm8001_sas.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index c3bb58885033b..75ac4d86d9c4b 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -753,8 +753,13 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
 		res = -TMF_RESP_FUNC_FAILED;
 		/* Even TMF timed out, return direct. */
 		if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+			struct pm8001_ccb_info *ccb = task->lldd_task;
+
 			pm8001_dbg(pm8001_ha, FAIL, "TMF task[%x]timeout.\n",
 				   tmf->tmf);
+
+			if (ccb)
+				ccb->task = NULL;
 			goto ex_err;
 		}
 
-- 
2.34.1

[PATCH 5.10 036/121] scsi: pm8001: Fix use-after-free for aborted SSP/STP sas_task

[Greg Kroah-Hartman]

From: John Garry <john.garry@huawei.com>

[ Upstream commit df7abcaa1246e2537ab4016077b5443bb3c09378 ]

Currently a use-after-free may occur if a sas_task is aborted by the upper
layer before we handle the I/O completion in mpi_ssp_completion() or
mpi_sata_completion().

In this case, the following are the two steps in handling those I/O
completions:

 - Call complete() to inform the upper layer handler of completion of
   the I/O.

 - Release driver resources associated with the sas_task in
   pm8001_ccb_task_free() call.

When complete() is called, the upper layer may free the sas_task. As such,
we should not touch the associated sas_task afterwards, but we do so in the
pm8001_ccb_task_free() call.

Fix by swapping the complete() and pm8001_ccb_task_free() calls ordering.

Link: https://lore.kernel.org/r/1643289172-165636-4-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index b22a8ab754faa..2a3ce4680734b 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2133,9 +2133,9 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		pm8001_dbg(pm8001_ha, FAIL,
 			   "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
 			   t, status, ts->resp, ts->stat);
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
 		if (t->slow_task)
 			complete(&t->slow_task->completion);
-		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
 	} else {
 		spin_unlock_irqrestore(&t->task_state_lock, flags);
 		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
@@ -2726,9 +2726,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		pm8001_dbg(pm8001_ha, FAIL,
 			   "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
 			   t, status, ts->resp, ts->stat);
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
 		if (t->slow_task)
 			complete(&t->slow_task->completion);
-		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
 	} else {
 		spin_unlock_irqrestore(&t->task_state_lock, flags);
 		pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
-- 
2.34.1

[PATCH 5.10 037/121] nvme: fix a possible use-after-free in controller reset during load

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit 0fa0f99fc84e41057cbdd2efbfe91c6b2f47dd9d ]

Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl
readiness for AER submission. This may lead to a use-after-free
condition that was observed with nvme-tcp.

The race condition may happen in the following scenario:
1. driver executes its reset_ctrl_work
2. -> nvme_stop_ctrl - flushes ctrl async_event_work
3. ctrl sends AEN which is received by the host, which in turn
   schedules AEN handling
4. teardown admin queue (which releases the queue socket)
5. AEN processed, submits another AER, calling the driver to submit
6. driver attempts to send the cmd
==> use-after-free

In order to fix that, add ctrl state check to validate the ctrl
is actually able to accept the AER submission.

This addresses the above race in controller resets because the driver
during teardown should:
1. change ctrl state to RESETTING
2. flush async_event_work (as well as other async work elements)

So after 1,2, any other AER command will find the
ctrl state to be RESETTING and bail out without submitting the AER.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 99b5152482fe4..71c85c99e86c6 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -4259,7 +4259,14 @@ static void nvme_async_event_work(struct work_struct *work)
 		container_of(work, struct nvme_ctrl, async_event_work);
 
 	nvme_aen_uevent(ctrl);
-	ctrl->ops->submit_async_event(ctrl);
+
+	/*
+	 * The transport drivers must guarantee AER submission here is safe by
+	 * flushing ctrl async_event_work after changing the controller state
+	 * from LIVE and before freeing the admin queue.
+	*/
+	if (ctrl->state == NVME_CTRL_LIVE)
+		ctrl->ops->submit_async_event(ctrl);
 }
 
 static bool nvme_ctrl_pp_status(struct nvme_ctrl *ctrl)
-- 
2.34.1

[PATCH 5.10 038/121] nvme-tcp: fix possible use-after-free in transport error_recovery work

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit ff9fc7ebf5c06de1ef72a69f9b1ab40af8b07f9e ]

While nvme_tcp_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.

Tested-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/tcp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 662028d7a1c6a..6105894a218a5 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -2077,6 +2077,7 @@ static void nvme_tcp_error_recovery_work(struct work_struct *work)
 	struct nvme_ctrl *ctrl = &tcp_ctrl->ctrl;
 
 	nvme_stop_keep_alive(ctrl);
+	flush_work(&ctrl->async_event_work);
 	nvme_tcp_teardown_io_queues(ctrl, false);
 	/* unquiesce to fail fast pending requests */
 	nvme_start_queues(ctrl);
-- 
2.34.1

[PATCH 5.10 039/121] nvme-rdma: fix possible use-after-free in transport error_recovery work

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit b6bb1722f34bbdbabed27acdceaf585d300c5fd2 ]

While nvme_rdma_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/rdma.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 1b90563818434..8eacc9bd58f5a 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -1200,6 +1200,7 @@ static void nvme_rdma_error_recovery_work(struct work_struct *work)
 			struct nvme_rdma_ctrl, err_work);
 
 	nvme_stop_keep_alive(&ctrl->ctrl);
+	flush_work(&ctrl->ctrl.async_event_work);
 	nvme_rdma_teardown_io_queues(ctrl, false);
 	nvme_start_queues(&ctrl->ctrl);
 	nvme_rdma_teardown_admin_queue(ctrl, false);
-- 
2.34.1

[PATCH 5.10 040/121] drm/amdgpu: fix logic inversion in check

[Greg Kroah-Hartman]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit e8ae38720e1a685fd98cfa5ae118c9d07b45ca79 ]

We probably never trigger this, but the logic inside the check is
inverted.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index 5207ad654f18e..0b162928a248b 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -2120,7 +2120,7 @@ int amdgpu_copy_buffer(struct amdgpu_ring *ring, uint64_t src_offset,
 	unsigned i;
 	int r;
 
-	if (direct_submit && !ring->sched.ready) {
+	if (!direct_submit && !ring->sched.ready) {
 		DRM_ERROR("Trying to move memory with ring turned off.\n");
 		return -EINVAL;
 	}
-- 
2.34.1

[PATCH 5.10 041/121] x86/Xen: streamline (and fix) PV CPU enumeration

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

[ Upstream commit e25a8d959992f61b64a58fc62fb7951dc6f31d1f ]

This started out with me noticing that "dom0_max_vcpus=<N>" with <N>
larger than the number of physical CPUs reported through ACPI tables
would not bring up the "excess" vCPU-s. Addressing this is the primary
purpose of the change; CPU maps handling is being tidied only as far as
is necessary for the change here (with the effect of also avoiding the
setting up of too much per-CPU infrastructure, i.e. for CPUs which can
never come online).

Noticing that xen_fill_possible_map() is called way too early, whereas
xen_filter_cpu_maps() is called too late (after per-CPU areas were
already set up), and further observing that each of the functions serves
only one of Dom0 or DomU, it looked like it was better to simplify this.
Use the .get_smp_config hook instead, uniformly for Dom0 and DomU.
xen_fill_possible_map() can be dropped altogether, while
xen_filter_cpu_maps() is re-purposed but not otherwise changed.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/2dbd5f0a-9859-ca2d-085e-a02f7166c610@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/xen/enlighten_pv.c |  4 ----
 arch/x86/xen/smp_pv.c       | 26 ++++++--------------------
 2 files changed, 6 insertions(+), 24 deletions(-)

diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c
index 16ff25d6935e7..804c65d2b95f3 100644
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -1387,10 +1387,6 @@ asmlinkage __visible void __init xen_start_kernel(void)
 
 		xen_acpi_sleep_register();
 
-		/* Avoid searching for BIOS MP tables */
-		x86_init.mpparse.find_smp_config = x86_init_noop;
-		x86_init.mpparse.get_smp_config = x86_init_uint_noop;
-
 		xen_boot_params_init_edd();
 
 #ifdef CONFIG_ACPI
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index c2ac319f11a4b..8f9e7e2407c87 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -149,28 +149,12 @@ int xen_smp_intr_init_pv(unsigned int cpu)
 	return rc;
 }
 
-static void __init xen_fill_possible_map(void)
-{
-	int i, rc;
-
-	if (xen_initial_domain())
-		return;
-
-	for (i = 0; i < nr_cpu_ids; i++) {
-		rc = HYPERVISOR_vcpu_op(VCPUOP_is_up, i, NULL);
-		if (rc >= 0) {
-			num_processors++;
-			set_cpu_possible(i, true);
-		}
-	}
-}
-
-static void __init xen_filter_cpu_maps(void)
+static void __init _get_smp_config(unsigned int early)
 {
 	int i, rc;
 	unsigned int subtract = 0;
 
-	if (!xen_initial_domain())
+	if (early)
 		return;
 
 	num_processors = 0;
@@ -211,7 +195,6 @@ static void __init xen_pv_smp_prepare_boot_cpu(void)
 		 * sure the old memory can be recycled. */
 		make_lowmem_page_readwrite(xen_initial_gdt);
 
-	xen_filter_cpu_maps();
 	xen_setup_vcpu_info_placement();
 
 	/*
@@ -491,5 +474,8 @@ static const struct smp_ops xen_smp_ops __initconst = {
 void __init xen_smp_init(void)
 {
 	smp_ops = xen_smp_ops;
-	xen_fill_possible_map();
+
+	/* Avoid searching for BIOS MP tables */
+	x86_init.mpparse.find_smp_config = x86_init_noop;
+	x86_init.mpparse.get_smp_config = _get_smp_config;
 }
-- 
2.34.1

[PATCH 5.10 042/121] Revert "module, async: async_synchronize_full() on module init iff async is used"

[Greg Kroah-Hartman]

From: Igor Pylypiv <ipylypiv@google.com>

[ Upstream commit 67d6212afda218d564890d1674bab28e8612170f ]

This reverts commit 774a1221e862b343388347bac9b318767336b20b.

We need to finish all async code before the module init sequence is
done.  In the reverted commit the PF_USED_ASYNC flag was added to mark a
thread that called async_schedule().  Then the PF_USED_ASYNC flag was
used to determine whether or not async_synchronize_full() needs to be
invoked.  This works when modprobe thread is calling async_schedule(),
but it does not work if module dispatches init code to a worker thread
which then calls async_schedule().

For example, PCI driver probing is invoked from a worker thread based on
a node where device is attached:

	if (cpu < nr_cpu_ids)
		error = work_on_cpu(cpu, local_pci_probe, &ddi);
	else
		error = local_pci_probe(&ddi);

We end up in a situation where a worker thread gets the PF_USED_ASYNC
flag set instead of the modprobe thread.  As a result,
async_synchronize_full() is not invoked and modprobe completes without
waiting for the async code to finish.

The issue was discovered while loading the pm80xx driver:
(scsi_mod.scan=async)

modprobe pm80xx                      worker
...
  do_init_module()
  ...
    pci_call_probe()
      work_on_cpu(local_pci_probe)
                                     local_pci_probe()
                                       pm8001_pci_probe()
                                         scsi_scan_host()
                                           async_schedule()
                                           worker->flags |= PF_USED_ASYNC;
                                     ...
      < return from worker >
  ...
  if (current->flags & PF_USED_ASYNC) <--- false
  	async_synchronize_full();

Commit 21c3c5d28007 ("block: don't request module during elevator init")
fixed the deadlock issue which the reverted commit 774a1221e862
("module, async: async_synchronize_full() on module init iff async is
used") tried to fix.

Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous
request_module() from async workers") synchronous module loading from
async is not allowed.

Given that the original deadlock issue is fixed and it is no longer
allowed to call synchronous request_module() from async we can remove
PF_USED_ASYNC flag to make module init consistently invoke
async_synchronize_full() unless async module probe is requested.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/sched.h |  1 -
 kernel/async.c        |  3 ---
 kernel/module.c       | 25 +++++--------------------
 3 files changed, 5 insertions(+), 24 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index b85b26d9ccefe..f996d1f343bb7 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1544,7 +1544,6 @@ extern struct pid *cad_pid;
 #define PF_MEMALLOC		0x00000800	/* Allocating memory */
 #define PF_NPROC_EXCEEDED	0x00001000	/* set_user() noticed that RLIMIT_NPROC was exceeded */
 #define PF_USED_MATH		0x00002000	/* If unset the fpu must be initialized before use */
-#define PF_USED_ASYNC		0x00004000	/* Used async_schedule*(), used by module init */
 #define PF_NOFREEZE		0x00008000	/* This thread should not be frozen */
 #define PF_FROZEN		0x00010000	/* Frozen for system suspend */
 #define PF_KSWAPD		0x00020000	/* I am kswapd */
diff --git a/kernel/async.c b/kernel/async.c
index 33258e6e20f83..1746cd65e271b 100644
--- a/kernel/async.c
+++ b/kernel/async.c
@@ -205,9 +205,6 @@ async_cookie_t async_schedule_node_domain(async_func_t func, void *data,
 	atomic_inc(&entry_count);
 	spin_unlock_irqrestore(&async_lock, flags);
 
-	/* mark that this task has queued an async job, used by module init */
-	current->flags |= PF_USED_ASYNC;
-
 	/* schedule for execution */
 	queue_work_node(node, system_unbound_wq, &entry->work);
 
diff --git a/kernel/module.c b/kernel/module.c
index 185b2655bc206..5f4403198f04b 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3714,12 +3714,6 @@ static noinline int do_init_module(struct module *mod)
 	}
 	freeinit->module_init = mod->init_layout.base;
 
-	/*
-	 * We want to find out whether @mod uses async during init.  Clear
-	 * PF_USED_ASYNC.  async_schedule*() will set it.
-	 */
-	current->flags &= ~PF_USED_ASYNC;
-
 	do_mod_ctors(mod);
 	/* Start the module */
 	if (mod->init != NULL)
@@ -3745,22 +3739,13 @@ static noinline int do_init_module(struct module *mod)
 
 	/*
 	 * We need to finish all async code before the module init sequence
-	 * is done.  This has potential to deadlock.  For example, a newly
-	 * detected block device can trigger request_module() of the
-	 * default iosched from async probing task.  Once userland helper
-	 * reaches here, async_synchronize_full() will wait on the async
-	 * task waiting on request_module() and deadlock.
-	 *
-	 * This deadlock is avoided by perfomring async_synchronize_full()
-	 * iff module init queued any async jobs.  This isn't a full
-	 * solution as it will deadlock the same if module loading from
-	 * async jobs nests more than once; however, due to the various
-	 * constraints, this hack seems to be the best option for now.
-	 * Please refer to the following thread for details.
+	 * is done. This has potential to deadlock if synchronous module
+	 * loading is requested from async (which is not allowed!).
 	 *
-	 * http://thread.gmane.org/gmane.linux.kernel/1420814
+	 * See commit 0fdff3ec6d87 ("async, kmod: warn on synchronous
+	 * request_module() from async workers") for more details.
 	 */
-	if (!mod->async_probe_requested && (current->flags & PF_USED_ASYNC))
+	if (!mod->async_probe_requested)
 		async_synchronize_full();
 
 	ftrace_free_mem(mod, mod->init_layout.base, mod->init_layout.base +
-- 
2.34.1

[PATCH 5.10 043/121] gcc-plugins/stackleak: Use noinstr in favor of notrace

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit dcb85f85fa6f142aae1fe86f399d4503d49f2b60 ]

While the stackleak plugin was already using notrace, objtool is now a
bit more picky.  Update the notrace uses to noinstr.  Silences the
following objtool warnings when building with:

CONFIG_DEBUG_ENTRY=y
CONFIG_STACK_VALIDATION=y
CONFIG_VMLINUX_VALIDATION=y
CONFIG_GCC_PLUGIN_STACKLEAK=y

  vmlinux.o: warning: objtool: do_syscall_64()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: do_int80_syscall_32()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: exc_general_protection()+0x22: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: fixup_bad_iret()+0x20: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: do_machine_check()+0x27: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .text+0x5346e: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x143: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x10eb: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x17f9: call to stackleak_erase() leaves .noinstr.text section

Note that the plugin's addition of calls to stackleak_track_stack() from
noinstr functions is expected to be safe, as it isn't runtime
instrumentation and is self-contained.

Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/stackleak.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/kernel/stackleak.c b/kernel/stackleak.c
index ce161a8e8d975..dd07239ddff9f 100644
--- a/kernel/stackleak.c
+++ b/kernel/stackleak.c
@@ -48,7 +48,7 @@ int stack_erasing_sysctl(struct ctl_table *table, int write,
 #define skip_erasing()	false
 #endif /* CONFIG_STACKLEAK_RUNTIME_DISABLE */
 
-asmlinkage void notrace stackleak_erase(void)
+asmlinkage void noinstr stackleak_erase(void)
 {
 	/* It would be nice not to have 'kstack_ptr' and 'boundary' on stack */
 	unsigned long kstack_ptr = current->lowest_stack;
@@ -102,9 +102,8 @@ asmlinkage void notrace stackleak_erase(void)
 	/* Reset the 'lowest_stack' value for the next syscall */
 	current->lowest_stack = current_top_of_stack() - THREAD_SIZE/64;
 }
-NOKPROBE_SYMBOL(stackleak_erase);
 
-void __used __no_caller_saved_registers notrace stackleak_track_stack(void)
+void __used __no_caller_saved_registers noinstr stackleak_track_stack(void)
 {
 	unsigned long sp = current_stack_pointer;
 
-- 
2.34.1

[PATCH 5.10 044/121] random: wake up /dev/random writers after zap

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

[ Upstream commit 042e293e16e3aa9794ce60c29f5b7b0c8170f933 ]

When account() is called, and the amount of entropy dips below
random_write_wakeup_bits, we wake up the random writers, so that they
can write some more in. However, the RNDZAPENTCNT/RNDCLEARPOOL ioctl
sets the entropy count to zero -- a potential reduction just like
account() -- but does not unblock writers. This commit adds the missing
logic to that ioctl to unblock waiting writers.

Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/random.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index 5444206f35e22..5f541c9465598 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1987,7 +1987,10 @@ static long random_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
 		 */
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		input_pool.entropy_count = 0;
+		if (xchg(&input_pool.entropy_count, 0) && random_write_wakeup_bits) {
+			wake_up_interruptible(&random_write_wait);
+			kill_fasync(&fasync, SIGIO, POLL_OUT);
+		}
 		return 0;
 	case RNDRESEEDCRNG:
 		if (!capable(CAP_SYS_ADMIN))
-- 
2.34.1

[PATCH 5.10 045/121] kbuild: lto: merge module sections

[Greg Kroah-Hartman]

From: Sami Tolvanen <samitolvanen@google.com>

commit dd2776222abb9893e5b5c237a2c8c880d8854cee upstream.

LLD always splits sections with LTO, which increases module sizes. This
change adds linker script rules to merge the split sections in the final
module.

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-6-samitolvanen@google.com
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/module.lds.S |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

--- a/scripts/module.lds.S
+++ b/scripts/module.lds.S
@@ -23,6 +23,30 @@ SECTIONS {
 	.init_array		0 : ALIGN(8) { *(SORT(.init_array.*)) *(.init_array) }
 
 	__jump_table		0 : ALIGN(8) { KEEP(*(__jump_table)) }
+
+	__patchable_function_entries : { *(__patchable_function_entries) }
+
+	/*
+	 * With CONFIG_LTO_CLANG, LLD always enables -fdata-sections and
+	 * -ffunction-sections, which increases the size of the final module.
+	 * Merge the split sections in the final binary.
+	 */
+	.bss : {
+		*(.bss .bss.[0-9a-zA-Z_]*)
+		*(.bss..L*)
+	}
+
+	.data : {
+		*(.data .data.[0-9a-zA-Z_]*)
+		*(.data..L*)
+	}
+
+	.rodata : {
+		*(.rodata .rodata.[0-9a-zA-Z_]*)
+		*(.rodata..L*)
+	}
+
+	.text : { *(.text .text.[0-9a-zA-Z_]*) }
 }
 
 /* bring in arch-specific sections */

[PATCH 5.10 046/121] kbuild: lto: Merge module sections if and only if CONFIG_LTO_CLANG is enabled

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit 6a3193cdd5e5b96ac65f04ee42555c216da332af upstream.

Merge module sections only when using Clang LTO. With ld.bfd, merging
sections does not appear to update the symbol tables for the module,
e.g. 'readelf -s' shows the value that a symbol would have had, if
sections were not merged. ld.lld does not show this problem.

The stale symbol table breaks gdb's function disassembler, and presumably
other things, e.g.

  gdb -batch -ex "file arch/x86/kvm/kvm.ko" -ex "disassemble kvm_init"

reads the wrong bytes and dumps garbage.

Fixes: dd2776222abb ("kbuild: lto: merge module sections")
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210322234438.502582-1-seanjc@google.com
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/module.lds.S |    2 ++
 1 file changed, 2 insertions(+)

--- a/scripts/module.lds.S
+++ b/scripts/module.lds.S
@@ -26,6 +26,7 @@ SECTIONS {
 
 	__patchable_function_entries : { *(__patchable_function_entries) }
 
+#ifdef CONFIG_LTO_CLANG
 	/*
 	 * With CONFIG_LTO_CLANG, LLD always enables -fdata-sections and
 	 * -ffunction-sections, which increases the size of the final module.
@@ -47,6 +48,7 @@ SECTIONS {
 	}
 
 	.text : { *(.text .text.[0-9a-zA-Z_]*) }
+#endif
 }
 
 /* bring in arch-specific sections */

[PATCH 5.10 047/121] iwlwifi: fix use-after-free

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit bea2662e7818e15d7607d17d57912ac984275d94 upstream.

If no firmware was present at all (or, presumably, all of the
firmware files failed to parse), we end up unbinding by calling
device_release_driver(), which calls remove(), which then in
iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However
the new code I added will still erroneously access it after it
was freed.

Set 'failure=false' in this case to avoid the access, all data
was already freed anyway.

Cc: stable@vger.kernel.org
Reported-by: Stefan Agner <stefan@agner.ch>
Reported-by: Wolfgang Walter <linux@stwm.de>
Reported-by: Jason Self <jason@bluehome.net>
Reported-by: Dominik Behr <dominik@dominikbehr.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: ab07506b0454 ("iwlwifi: fix leaks/bad data after failed firmware load")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220208114728.e6b514cf4c85.Iffb575ca2a623d7859b542c33b2a507d01554251@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -1646,6 +1646,8 @@ static void iwl_req_fw_callback(const st
  out_unbind:
 	complete(&drv->request_firmware_complete);
 	device_release_driver(drv->trans->dev);
+	/* drv has just been freed by the release */
+	failure = false;
  free:
 	if (failure)
 		iwl_dealloc_ucode(drv);

[PATCH 5.10 048/121] drm/radeon: Fix backlight control on iMac 12,1

[Greg Kroah-Hartman]

From: Nicholas Bishop <nicholasbishop@google.com>

commit 364438fd629f7611a84c8e6d7de91659300f1502 upstream.

The iMac 12,1 does not use the gmux driver for backlight, so the radeon
backlight device is needed to set the brightness.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838
Signed-off-by: Nicholas Bishop <nicholasbishop@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/radeon/atombios_encoders.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -197,7 +197,8 @@ void radeon_atom_backlight_init(struct r
 	 * so don't register a backlight device
 	 */
 	if ((rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) &&
-	    (rdev->pdev->device == 0x6741))
+	    (rdev->pdev->device == 0x6741) &&
+	    !dmi_match(DMI_PRODUCT_NAME, "iMac12,1"))
 		return;
 
 	if (!radeon_encoder->enc_priv)

[PATCH 5.10 049/121] drm/i915/opregion: check port number bounds for SWSCI display power state

[Greg Kroah-Hartman]

From: Jani Nikula <jani.nikula@intel.com>

commit ea958422291de248b9e2eaaeea36004e84b64043 upstream.

The mapping from enum port to whatever port numbering scheme is used by
the SWSCI Display Power State Notification is odd, and the memory of it
has faded. In any case, the parameter only has space for ports numbered
[0..4], and UBSAN reports bit shift beyond it when the platform has port
F or more.

Since the SWSCI functionality is supposed to be obsolete for new
platforms (i.e. ones that might have port F or more), just bail out
early if the mapped and mangled port number is beyond what the Display
Power State Notification can support.

Fixes: 9c4b0a683193 ("drm/i915: add opregion function to notify bios of encoder enable/disable")
Cc: <stable@vger.kernel.org> # v3.13+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4800
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cc363f42d6b5a5932b6d218fefcc8bdfb15dbbe5.1644489329.git.jani.nikula@intel.com
(cherry picked from commit 24a644ebbfd3b13cda702f98907f9dd123e34bf9)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/display/intel_opregion.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/drivers/gpu/drm/i915/display/intel_opregion.c
+++ b/drivers/gpu/drm/i915/display/intel_opregion.c
@@ -361,6 +361,21 @@ int intel_opregion_notify_encoder(struct
 		port++;
 	}
 
+	/*
+	 * The port numbering and mapping here is bizarre. The now-obsolete
+	 * swsci spec supports ports numbered [0..4]. Port E is handled as a
+	 * special case, but port F and beyond are not. The functionality is
+	 * supposed to be obsolete for new platforms. Just bail out if the port
+	 * number is out of bounds after mapping.
+	 */
+	if (port > 4) {
+		drm_dbg_kms(&dev_priv->drm,
+			    "[ENCODER:%d:%s] port %c (index %u) out of bounds for display power state notification\n",
+			    intel_encoder->base.base.id, intel_encoder->base.name,
+			    port_name(intel_encoder->port), port);
+		return -EINVAL;
+	}
+
 	if (!enable)
 		parm |= 4 << 8;
 

[PATCH 5.10 050/121] vsock: remove vsock from connected table when connect is interrupted by a signal

[Greg Kroah-Hartman]

From: Seth Forshee <sforshee@digitalocean.com>

commit b9208492fcaecff8f43915529ae34b3bcb03877c upstream.

vsock_connect() expects that the socket could already be in the
TCP_ESTABLISHED state when the connecting task wakes up with a signal
pending. If this happens the socket will be in the connected table, and
it is not removed when the socket state is reset. In this situation it's
common for the process to retry connect(), and if the connection is
successful the socket will be added to the connected table a second
time, corrupting the list.

Prevent this by calling vsock_remove_connected() if a signal is received
while waiting for a connection. This is harmless if the socket is not in
the connected table, and if it is in the table then removing it will
prevent list corruption from a double add.

Note for backporting: this patch requires d5afa82c977e ("vsock: correct
removal of socket from the list"), which is in all current stable trees
except 4.9.y.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/vmw_vsock/af_vsock.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -1357,6 +1357,7 @@ static int vsock_stream_connect(struct s
 			sk->sk_state = sk->sk_state == TCP_ESTABLISHED ? TCP_CLOSING : TCP_CLOSE;
 			sock->state = SS_UNCONNECTED;
 			vsock_transport_cancel_pkt(vsk);
+			vsock_remove_connected(vsk);
 			goto out_wait;
 		} else if (timeout == 0) {
 			err = -ETIMEDOUT;

[PATCH 5.10 051/121] drm/i915/gvt: Make DRM_I915_GVT depend on X86

[Greg Kroah-Hartman]

From: Siva Mullati <siva.mullati@intel.com>

commit d72d69abfdb6e0375981cfdda8eb45143f12c77d upstream.

GVT is not supported on non-x86 platforms, So add
dependency of X86 on config parameter DRM_I915_GVT.

Fixes: 0ad35fed618c ("drm/i915: gvt: Introduce the basic architecture of GVT-g")
Signed-off-by: Siva Mullati <siva.mullati@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220107095235.243448-1-siva.mullati@intel.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/i915/Kconfig
+++ b/drivers/gpu/drm/i915/Kconfig
@@ -100,6 +100,7 @@ config DRM_I915_USERPTR
 config DRM_I915_GVT
 	bool "Enable Intel GVT-g graphics virtualization host support"
 	depends on DRM_I915
+	depends on X86
 	depends on 64BIT
 	default n
 	help

[PATCH 5.10 052/121] iwlwifi: pcie: fix locking when "HW not ready"

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit e9848aed147708a06193b40d78493b0ef6abccf2 upstream.

If we run into this error path, we shouldn't unlock the mutex
since it's not locked since. Fix this.

Fixes: a6bd005fe92d ("iwlwifi: pcie: fix RF-Kill vs. firmware load race")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -1313,8 +1313,7 @@ static int iwl_trans_pcie_start_fw(struc
 	/* This may fail if AMT took ownership of the device */
 	if (iwl_pcie_prepare_card_hw(trans)) {
 		IWL_WARN(trans, "Exit HW not ready\n");
-		ret = -EIO;
-		goto out;
+		return -EIO;
 	}
 
 	iwl_enable_rfkill_int(trans);

[PATCH 5.10 053/121] iwlwifi: pcie: gen2: fix locking when "HW not ready"

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit 4c29c1e27a1e178a219b3877d055e6dd643bdfda upstream.

If we run into this error path, we shouldn't unlock the mutex
since it's not locked since. Fix this in the gen2 code as well.

Fixes: eda50cde58de ("iwlwifi: pcie: add context information support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.b8b0dfce16ef.Ie20f0f7b23e5911350a2766524300d2915e7b677@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
@@ -320,8 +320,7 @@ int iwl_trans_pcie_gen2_start_fw(struct
 	/* This may fail if AMT took ownership of the device */
 	if (iwl_pcie_prepare_card_hw(trans)) {
 		IWL_WARN(trans, "Exit HW not ready\n");
-		ret = -EIO;
-		goto out;
+		return -EIO;
 	}
 
 	iwl_enable_rfkill_int(trans);

[PATCH 5.10 054/121] selftests: netfilter: fix exit value for nft_concat_range

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

commit 2e71ec1a725a794a16e3862791ed43fe5ba6a06b upstream.

When the nft_concat_range test failed, it exit 1 in the code
specifically.

But when part of, or all of the test passed, it will failed the
[ ${passed} -eq 0 ] check and thus exit with 1, which is the same
exit value with failure result. Fix it by exit 0 when passed is not 0.

Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/netfilter/nft_concat_range.sh |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/testing/selftests/netfilter/nft_concat_range.sh
+++ b/tools/testing/selftests/netfilter/nft_concat_range.sh
@@ -1583,4 +1583,4 @@ for name in ${TESTS}; do
 	done
 done
 
-[ ${passed} -eq 0 ] && exit ${KSELFTEST_SKIP}
+[ ${passed} -eq 0 ] && exit ${KSELFTEST_SKIP} || exit 0

[PATCH 5.10 055/121] netfilter: nft_synproxy: unregister hooks on init error path

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 2b4e5fb4d3776c391e40fb33673ba946dd96012d upstream.

Disable the IPv4 hooks if the IPv6 hooks fail to be registered.

Fixes: ad49d86e07a4 ("netfilter: nf_tables: Add synproxy support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nft_synproxy.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/netfilter/nft_synproxy.c
+++ b/net/netfilter/nft_synproxy.c
@@ -191,8 +191,10 @@ static int nft_synproxy_do_init(const st
 		if (err)
 			goto nf_ct_failure;
 		err = nf_synproxy_ipv6_init(snet, ctx->net);
-		if (err)
+		if (err) {
+			nf_synproxy_ipv4_fini(snet, ctx->net);
 			goto nf_ct_failure;
+		}
 		break;
 	}
 

[PATCH 5.10 056/121] ipv6: per-netns exclusive flowlabel checks

[Greg Kroah-Hartman]

From: Willem de Bruijn <willemb@google.com>

commit 0b0dff5b3b98c5c7ce848151df9da0b3cdf0cc8b upstream.

Ipv6 flowlabels historically require a reservation before use.
Optionally in exclusive mode (e.g., user-private).

Commit 59c820b2317f ("ipv6: elide flowlabel check if no exclusive
leases exist") introduced a fastpath that avoids this check when no
exclusive leases exist in the system, and thus any flowlabel use
will be granted.

That allows skipping the control operation to reserve a flowlabel
entirely. Though with a warning if the fast path fails:

  This is an optimization. Robust applications still have to revert to
  requesting leases if the fast path fails due to an exclusive lease.

Still, this is subtle. Better isolate network namespaces from each
other. Flowlabels are per-netns. Also record per-netns whether
exclusive leases are in use. Then behavior does not change based on
activity in other netns.

Changes
  v2
    - wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled

Fixes: 59c820b2317f ("ipv6: elide flowlabel check if no exclusive leases exist")
Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/
Reported-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Congyu Liu <liu3101@purdue.edu>
Link: https://lore.kernel.org/r/20220215160037.1976072-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ipv6.h       |    5 ++++-
 include/net/netns/ipv6.h |    3 ++-
 net/ipv6/ip6_flowlabel.c |    4 +++-
 3 files changed, 9 insertions(+), 3 deletions(-)

--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -390,17 +390,20 @@ static inline void txopt_put(struct ipv6
 		kfree_rcu(opt, rcu);
 }
 
+#if IS_ENABLED(CONFIG_IPV6)
 struct ip6_flowlabel *__fl6_sock_lookup(struct sock *sk, __be32 label);
 
 extern struct static_key_false_deferred ipv6_flowlabel_exclusive;
 static inline struct ip6_flowlabel *fl6_sock_lookup(struct sock *sk,
 						    __be32 label)
 {
-	if (static_branch_unlikely(&ipv6_flowlabel_exclusive.key))
+	if (static_branch_unlikely(&ipv6_flowlabel_exclusive.key) &&
+	    READ_ONCE(sock_net(sk)->ipv6.flowlabel_has_excl))
 		return __fl6_sock_lookup(sk, label) ? : ERR_PTR(-ENOENT);
 
 	return NULL;
 }
+#endif
 
 struct ipv6_txoptions *fl6_merge_options(struct ipv6_txoptions *opt_space,
 					 struct ip6_flowlabel *fl,
--- a/include/net/netns/ipv6.h
+++ b/include/net/netns/ipv6.h
@@ -80,9 +80,10 @@ struct netns_ipv6 {
 	spinlock_t		fib6_gc_lock;
 	unsigned int		 ip6_rt_gc_expire;
 	unsigned long		 ip6_rt_last_gc;
+	unsigned char		flowlabel_has_excl;
 #ifdef CONFIG_IPV6_MULTIPLE_TABLES
-	unsigned int		fib6_rules_require_fldissect;
 	bool			fib6_has_custom_rules;
+	unsigned int		fib6_rules_require_fldissect;
 #ifdef CONFIG_IPV6_SUBTREES
 	unsigned int		fib6_routes_require_src;
 #endif
--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -450,8 +450,10 @@ fl_create(struct net *net, struct sock *
 		err = -EINVAL;
 		goto done;
 	}
-	if (fl_shared_exclusive(fl) || fl->opt)
+	if (fl_shared_exclusive(fl) || fl->opt) {
+		WRITE_ONCE(sock_net(sk)->ipv6.flowlabel_has_excl, 1);
 		static_branch_deferred_inc(&ipv6_flowlabel_exclusive);
+	}
 	return fl;
 
 done:

[PATCH 5.10 057/121] net: dsa: lan9303: fix reset on probe

[Greg Kroah-Hartman]

From: Mans Rullgard <mans@mansr.com>

commit 6bb9681a43f34f2cab4aad6e2a02da4ce54d13c5 upstream.

The reset input to the LAN9303 chip is active low, and devicetree
gpio handles reflect this.  Therefore, the gpio should be requested
with an initial state of high in order for the reset signal to be
asserted.  Other uses of the gpio already use the correct polarity.

Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fianelil <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220209145454.19749-1-mans@mansr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/lan9303-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -1305,7 +1305,7 @@ static int lan9303_probe_reset_gpio(stru
 				     struct device_node *np)
 {
 	chip->reset_gpio = devm_gpiod_get_optional(chip->dev, "reset",
-						   GPIOD_OUT_LOW);
+						   GPIOD_OUT_HIGH);
 	if (IS_ERR(chip->reset_gpio))
 		return PTR_ERR(chip->reset_gpio);
 

[PATCH 5.10 058/121] net: dsa: lantiq_gswip: fix use after free in gswip_remove()

[Greg Kroah-Hartman]

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

commit 8c6ae46150a453f8ae9a6cd49b45f354f478587d upstream.

of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be
done before mdiobus_free(priv->ds->slave_mii_bus).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 0d120dfb5d67 ("net: dsa: lantiq_gswip: don't use devres for mdiobus")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1644921768-26477-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/lantiq_gswip.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -2114,8 +2114,8 @@ static int gswip_remove(struct platform_
 
 	if (priv->ds->slave_mii_bus) {
 		mdiobus_unregister(priv->ds->slave_mii_bus);
-		mdiobus_free(priv->ds->slave_mii_bus);
 		of_node_put(priv->ds->slave_mii_bus->dev.of_node);
+		mdiobus_free(priv->ds->slave_mii_bus);
 	}
 
 	for (i = 0; i < priv->num_gphy_fw; i++)

[PATCH 5.10 059/121] net: ieee802154: ca8210: Fix lifs/sifs periods

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit bdc120a2bcd834e571ce4115aaddf71ab34495de upstream.

These periods are expressed in time units (microseconds) while 40 and 12
are the number of symbol durations these periods will last. We need to
multiply them both with the symbol_duration in order to get these
values in microseconds.

Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220201180629.93410-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ieee802154/ca8210.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -2977,8 +2977,8 @@ static void ca8210_hw_setup(struct ieee8
 	ca8210_hw->phy->cca.opt = NL802154_CCA_OPT_ENERGY_CARRIER_AND;
 	ca8210_hw->phy->cca_ed_level = -9800;
 	ca8210_hw->phy->symbol_duration = 16;
-	ca8210_hw->phy->lifs_period = 40;
-	ca8210_hw->phy->sifs_period = 12;
+	ca8210_hw->phy->lifs_period = 40 * ca8210_hw->phy->symbol_duration;
+	ca8210_hw->phy->sifs_period = 12 * ca8210_hw->phy->symbol_duration;
 	ca8210_hw->flags =
 		IEEE802154_HW_AFILT |
 		IEEE802154_HW_OMIT_CKSUM |

[PATCH 5.10 060/121] ping: fix the dif and sdif check in ping_lookup

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

commit 35a79e64de29e8d57a5989aac57611c0cd29e13e upstream.

When 'ping' changes to use PING socket instead of RAW socket by:

   # sysctl -w net.ipv4.ping_group_range="0 100"

There is another regression caused when matching sk_bound_dev_if
and dif, RAW socket is using inet_iif() while PING socket lookup
is using skb->dev->ifindex, the cmd below fails due to this:

  # ip link add dummy0 type dummy
  # ip link set dummy0 up
  # ip addr add 192.168.111.1/24 dev dummy0
  # ping -I dummy0 192.168.111.1 -c1

The issue was also reported on:

  https://github.com/iputils/iputils/issues/104

But fixed in iputils in a wrong way by not binding to device when
destination IP is on device, and it will cause some of kselftests
to fail, as Jianlin noticed.

This patch is to use inet(6)_iif and inet(6)_sdif to get dif and
sdif for PING socket, and keep consistent with RAW socket.

Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ping.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -172,16 +172,23 @@ static struct sock *ping_lookup(struct n
 	struct sock *sk = NULL;
 	struct inet_sock *isk;
 	struct hlist_nulls_node *hnode;
-	int dif = skb->dev->ifindex;
+	int dif, sdif;
 
 	if (skb->protocol == htons(ETH_P_IP)) {
+		dif = inet_iif(skb);
+		sdif = inet_sdif(skb);
 		pr_debug("try to find: num = %d, daddr = %pI4, dif = %d\n",
 			 (int)ident, &ip_hdr(skb)->daddr, dif);
 #if IS_ENABLED(CONFIG_IPV6)
 	} else if (skb->protocol == htons(ETH_P_IPV6)) {
+		dif = inet6_iif(skb);
+		sdif = inet6_sdif(skb);
 		pr_debug("try to find: num = %d, daddr = %pI6c, dif = %d\n",
 			 (int)ident, &ipv6_hdr(skb)->daddr, dif);
 #endif
+	} else {
+		pr_err("ping: protocol(%x) is not supported\n", ntohs(skb->protocol));
+		return NULL;
 	}
 
 	read_lock_bh(&ping_table.lock);
@@ -221,7 +228,7 @@ static struct sock *ping_lookup(struct n
 		}
 
 		if (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif &&
-		    sk->sk_bound_dev_if != inet_sdif(skb))
+		    sk->sk_bound_dev_if != sdif)
 			continue;
 
 		sock_hold(sk);

[PATCH 5.10 061/121] bonding: force carrier update when releasing slave

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

commit a6ab75cec1e461f8a35559054c146c21428430b8 upstream.

In __bond_release_one(), bond_set_carrier() is only called when bond
device has no slave. Therefore, if we remove the up slave from a master
with two slaves and keep the down slave, the master will remain up.

Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond))
statement.

Reproducer:
$ insmod bonding.ko mode=0 miimon=100 max_bonds=2
$ ifconfig bond0 up
$ ifenslave bond0 eth0 eth1
$ ifconfig eth0 down
$ ifenslave -d bond0 eth1
$ cat /proc/net/bonding/bond0

Fixes: ff59c4563a8d ("[PATCH] bonding: support carrier state for master")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/bonding/bond_main.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2272,10 +2272,9 @@ static int __bond_release_one(struct net
 		bond_select_active_slave(bond);
 	}
 
-	if (!bond_has_slaves(bond)) {
-		bond_set_carrier(bond);
+	bond_set_carrier(bond);
+	if (!bond_has_slaves(bond))
 		eth_hw_addr_random(bond_dev);
-	}
 
 	unblock_netpoll_tx();
 	synchronize_rcu();

[PATCH 5.10 062/121] drop_monitor: fix data-race in dropmon_net_event / trace_napi_poll_hit

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit dcd54265c8bc14bd023815e36e2d5f9d66ee1fee upstream.

trace_napi_poll_hit() is reading stat->dev while another thread can write
on it from dropmon_net_event()

Use READ_ONCE()/WRITE_ONCE() here, RCU rules are properly enforced already,
we only have to take care of load/store tearing.

BUG: KCSAN: data-race in dropmon_net_event / trace_napi_poll_hit

write to 0xffff88816f3ab9c0 of 8 bytes by task 20260 on cpu 1:
 dropmon_net_event+0xb8/0x2b0 net/core/drop_monitor.c:1579
 notifier_call_chain kernel/notifier.c:84 [inline]
 raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:392
 call_netdevice_notifiers_info net/core/dev.c:1919 [inline]
 call_netdevice_notifiers_extack net/core/dev.c:1931 [inline]
 call_netdevice_notifiers net/core/dev.c:1945 [inline]
 unregister_netdevice_many+0x867/0xfb0 net/core/dev.c:10415
 ip_tunnel_delete_nets+0x24a/0x280 net/ipv4/ip_tunnel.c:1123
 vti_exit_batch_net+0x2a/0x30 net/ipv4/ip_vti.c:515
 ops_exit_list net/core/net_namespace.c:173 [inline]
 cleanup_net+0x4dc/0x8d0 net/core/net_namespace.c:597
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 worker_thread+0x616/0xa70 kernel/workqueue.c:2454
 kthread+0x1bf/0x1e0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

read to 0xffff88816f3ab9c0 of 8 bytes by interrupt on cpu 0:
 trace_napi_poll_hit+0x89/0x1c0 net/core/drop_monitor.c:292
 trace_napi_poll include/trace/events/napi.h:14 [inline]
 __napi_poll+0x36b/0x3f0 net/core/dev.c:6366
 napi_poll net/core/dev.c:6432 [inline]
 net_rx_action+0x29e/0x650 net/core/dev.c:6519
 __do_softirq+0x158/0x2de kernel/softirq.c:558
 do_softirq+0xb1/0xf0 kernel/softirq.c:459
 __local_bh_enable_ip+0x68/0x70 kernel/softirq.c:383
 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
 _raw_spin_unlock_bh+0x33/0x40 kernel/locking/spinlock.c:210
 spin_unlock_bh include/linux/spinlock.h:394 [inline]
 ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline]
 wg_packet_decrypt_worker+0x73c/0x780 drivers/net/wireguard/receive.c:506
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 worker_thread+0x616/0xa70 kernel/workqueue.c:2454
 kthread+0x1bf/0x1e0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

value changed: 0xffff88815883e000 -> 0x0000000000000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 26435 Comm: kworker/0:1 Not tainted 5.17.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker

Fixes: 4ea7e38696c7 ("dropmon: add ability to detect when hardware dropsrxpackets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/drop_monitor.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -280,13 +280,17 @@ static void trace_napi_poll_hit(void *ig
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(new_stat, &hw_stats_list, list) {
+		struct net_device *dev;
+
 		/*
 		 * only add a note to our monitor buffer if:
 		 * 1) this is the dev we received on
 		 * 2) its after the last_rx delta
 		 * 3) our rx_dropped count has gone up
 		 */
-		if ((new_stat->dev == napi->dev)  &&
+		/* Paired with WRITE_ONCE() in dropmon_net_event() */
+		dev = READ_ONCE(new_stat->dev);
+		if ((dev == napi->dev)  &&
 		    (time_after(jiffies, new_stat->last_rx + dm_hw_check_delta)) &&
 		    (napi->dev->stats.rx_dropped != new_stat->last_drop_val)) {
 			trace_drop_common(NULL, NULL);
@@ -1574,7 +1578,10 @@ static int dropmon_net_event(struct noti
 		mutex_lock(&net_dm_mutex);
 		list_for_each_entry_safe(new_stat, tmp, &hw_stats_list, list) {
 			if (new_stat->dev == dev) {
-				new_stat->dev = NULL;
+
+				/* Paired with READ_ONCE() in trace_napi_poll_hit() */
+				WRITE_ONCE(new_stat->dev, NULL);
+
 				if (trace_state == TRACE_OFF) {
 					list_del_rcu(&new_stat->list);
 					kfree_rcu(new_stat, rcu);

[PATCH 5.10 063/121] net_sched: add __rcu annotation to netdev->qdisc

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 5891cd5ec46c2c2eb6427cb54d214b149635dd0e upstream.

syzbot found a data-race [1] which lead me to add __rcu
annotations to netdev->qdisc, and proper accessors
to get LOCKDEP support.

[1]
BUG: KCSAN: data-race in dev_activate / qdisc_lookup_rcu

write to 0xffff888168ad6410 of 8 bytes by task 13559 on cpu 1:
 attach_default_qdiscs net/sched/sch_generic.c:1167 [inline]
 dev_activate+0x2ed/0x8f0 net/sched/sch_generic.c:1221
 __dev_open+0x2e9/0x3a0 net/core/dev.c:1416
 __dev_change_flags+0x167/0x3f0 net/core/dev.c:8139
 rtnl_configure_link+0xc2/0x150 net/core/rtnetlink.c:3150
 __rtnl_newlink net/core/rtnetlink.c:3489 [inline]
 rtnl_newlink+0xf4d/0x13e0 net/core/rtnetlink.c:3529
 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594
 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494
 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmsg+0x195/0x230 net/socket.c:2496
 __do_sys_sendmsg net/socket.c:2505 [inline]
 __se_sys_sendmsg net/socket.c:2503 [inline]
 __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888168ad6410 of 8 bytes by task 13560 on cpu 0:
 qdisc_lookup_rcu+0x30/0x2e0 net/sched/sch_api.c:323
 __tcf_qdisc_find+0x74/0x3a0 net/sched/cls_api.c:1050
 tc_del_tfilter+0x1c7/0x1350 net/sched/cls_api.c:2211
 rtnetlink_rcv_msg+0x5ba/0x7e0 net/core/rtnetlink.c:5585
 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494
 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmsg+0x195/0x230 net/socket.c:2496
 __do_sys_sendmsg net/socket.c:2505 [inline]
 __se_sys_sendmsg net/socket.c:2503 [inline]
 __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 470502de5bdb ("net: sched: unlock rules update API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/netdevice.h |    2 +-
 net/core/rtnetlink.c      |    6 ++++--
 net/sched/cls_api.c       |    6 +++---
 net/sched/sch_api.c       |   22 ++++++++++++----------
 net/sched/sch_generic.c   |   29 ++++++++++++++++-------------
 5 files changed, 36 insertions(+), 29 deletions(-)

--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2061,7 +2061,7 @@ struct net_device {
 	struct netdev_queue	*_tx ____cacheline_aligned_in_smp;
 	unsigned int		num_tx_queues;
 	unsigned int		real_num_tx_queues;
-	struct Qdisc		*qdisc;
+	struct Qdisc __rcu	*qdisc;
 	unsigned int		tx_queue_len;
 	spinlock_t		tx_global_lock;
 
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1705,6 +1705,7 @@ static int rtnl_fill_ifinfo(struct sk_bu
 {
 	struct ifinfomsg *ifm;
 	struct nlmsghdr *nlh;
+	struct Qdisc *qdisc;
 
 	ASSERT_RTNL();
 	nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ifm), flags);
@@ -1722,6 +1723,7 @@ static int rtnl_fill_ifinfo(struct sk_bu
 	if (tgt_netnsid >= 0 && nla_put_s32(skb, IFLA_TARGET_NETNSID, tgt_netnsid))
 		goto nla_put_failure;
 
+	qdisc = rtnl_dereference(dev->qdisc);
 	if (nla_put_string(skb, IFLA_IFNAME, dev->name) ||
 	    nla_put_u32(skb, IFLA_TXQLEN, dev->tx_queue_len) ||
 	    nla_put_u8(skb, IFLA_OPERSTATE,
@@ -1740,8 +1742,8 @@ static int rtnl_fill_ifinfo(struct sk_bu
 #endif
 	    put_master_ifindex(skb, dev) ||
 	    nla_put_u8(skb, IFLA_CARRIER, netif_carrier_ok(dev)) ||
-	    (dev->qdisc &&
-	     nla_put_string(skb, IFLA_QDISC, dev->qdisc->ops->id)) ||
+	    (qdisc &&
+	     nla_put_string(skb, IFLA_QDISC, qdisc->ops->id)) ||
 	    nla_put_ifalias(skb, dev) ||
 	    nla_put_u32(skb, IFLA_CARRIER_CHANGES,
 			atomic_read(&dev->carrier_up_count) +
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -1045,7 +1045,7 @@ static int __tcf_qdisc_find(struct net *
 
 	/* Find qdisc */
 	if (!*parent) {
-		*q = dev->qdisc;
+		*q = rcu_dereference(dev->qdisc);
 		*parent = (*q)->handle;
 	} else {
 		*q = qdisc_lookup_rcu(dev, TC_H_MAJ(*parent));
@@ -2591,7 +2591,7 @@ static int tc_dump_tfilter(struct sk_buf
 
 		parent = tcm->tcm_parent;
 		if (!parent)
-			q = dev->qdisc;
+			q = rtnl_dereference(dev->qdisc);
 		else
 			q = qdisc_lookup(dev, TC_H_MAJ(tcm->tcm_parent));
 		if (!q)
@@ -2977,7 +2977,7 @@ static int tc_dump_chain(struct sk_buff
 
 		parent = tcm->tcm_parent;
 		if (!parent) {
-			q = dev->qdisc;
+			q = rtnl_dereference(dev->qdisc);
 			parent = q->handle;
 		} else {
 			q = qdisc_lookup(dev, TC_H_MAJ(tcm->tcm_parent));
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -301,7 +301,7 @@ struct Qdisc *qdisc_lookup(struct net_de
 
 	if (!handle)
 		return NULL;
-	q = qdisc_match_from_root(dev->qdisc, handle);
+	q = qdisc_match_from_root(rtnl_dereference(dev->qdisc), handle);
 	if (q)
 		goto out;
 
@@ -320,7 +320,7 @@ struct Qdisc *qdisc_lookup_rcu(struct ne
 
 	if (!handle)
 		return NULL;
-	q = qdisc_match_from_root(dev->qdisc, handle);
+	q = qdisc_match_from_root(rcu_dereference(dev->qdisc), handle);
 	if (q)
 		goto out;
 
@@ -1082,10 +1082,10 @@ static int qdisc_graft(struct net_device
 skip:
 		if (!ingress) {
 			notify_and_destroy(net, skb, n, classid,
-					   dev->qdisc, new);
+					   rtnl_dereference(dev->qdisc), new);
 			if (new && !new->ops->attach)
 				qdisc_refcount_inc(new);
-			dev->qdisc = new ? : &noop_qdisc;
+			rcu_assign_pointer(dev->qdisc, new ? : &noop_qdisc);
 
 			if (new && new->ops->attach)
 				new->ops->attach(new);
@@ -1460,7 +1460,7 @@ static int tc_get_qdisc(struct sk_buff *
 				q = dev_ingress_queue(dev)->qdisc_sleeping;
 			}
 		} else {
-			q = dev->qdisc;
+			q = rtnl_dereference(dev->qdisc);
 		}
 		if (!q) {
 			NL_SET_ERR_MSG(extack, "Cannot find specified qdisc on specified device");
@@ -1549,7 +1549,7 @@ replay:
 				q = dev_ingress_queue(dev)->qdisc_sleeping;
 			}
 		} else {
-			q = dev->qdisc;
+			q = rtnl_dereference(dev->qdisc);
 		}
 
 		/* It may be default qdisc, ignore it */
@@ -1771,7 +1771,8 @@ static int tc_dump_qdisc(struct sk_buff
 			s_q_idx = 0;
 		q_idx = 0;
 
-		if (tc_dump_qdisc_root(dev->qdisc, skb, cb, &q_idx, s_q_idx,
+		if (tc_dump_qdisc_root(rtnl_dereference(dev->qdisc),
+				       skb, cb, &q_idx, s_q_idx,
 				       true, tca[TCA_DUMP_INVISIBLE]) < 0)
 			goto done;
 
@@ -2047,7 +2048,7 @@ static int tc_ctl_tclass(struct sk_buff
 		} else if (qid1) {
 			qid = qid1;
 		} else if (qid == 0)
-			qid = dev->qdisc->handle;
+			qid = rtnl_dereference(dev->qdisc)->handle;
 
 		/* Now qid is genuine qdisc handle consistent
 		 * both with parent and child.
@@ -2058,7 +2059,7 @@ static int tc_ctl_tclass(struct sk_buff
 			portid = TC_H_MAKE(qid, portid);
 	} else {
 		if (qid == 0)
-			qid = dev->qdisc->handle;
+			qid = rtnl_dereference(dev->qdisc)->handle;
 	}
 
 	/* OK. Locate qdisc */
@@ -2219,7 +2220,8 @@ static int tc_dump_tclass(struct sk_buff
 	s_t = cb->args[0];
 	t = 0;
 
-	if (tc_dump_tclass_root(dev->qdisc, skb, tcm, cb, &t, s_t, true) < 0)
+	if (tc_dump_tclass_root(rtnl_dereference(dev->qdisc),
+				skb, tcm, cb, &t, s_t, true) < 0)
 		goto done;
 
 	dev_queue = dev_ingress_queue(dev);
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -1088,30 +1088,33 @@ static void attach_default_qdiscs(struct
 	if (!netif_is_multiqueue(dev) ||
 	    dev->priv_flags & IFF_NO_QUEUE) {
 		netdev_for_each_tx_queue(dev, attach_one_default_qdisc, NULL);
-		dev->qdisc = txq->qdisc_sleeping;
-		qdisc_refcount_inc(dev->qdisc);
+		qdisc = txq->qdisc_sleeping;
+		rcu_assign_pointer(dev->qdisc, qdisc);
+		qdisc_refcount_inc(qdisc);
 	} else {
 		qdisc = qdisc_create_dflt(txq, &mq_qdisc_ops, TC_H_ROOT, NULL);
 		if (qdisc) {
-			dev->qdisc = qdisc;
+			rcu_assign_pointer(dev->qdisc, qdisc);
 			qdisc->ops->attach(qdisc);
 		}
 	}
+	qdisc = rtnl_dereference(dev->qdisc);
 
 	/* Detect default qdisc setup/init failed and fallback to "noqueue" */
-	if (dev->qdisc == &noop_qdisc) {
+	if (qdisc == &noop_qdisc) {
 		netdev_warn(dev, "default qdisc (%s) fail, fallback to %s\n",
 			    default_qdisc_ops->id, noqueue_qdisc_ops.id);
 		dev->priv_flags |= IFF_NO_QUEUE;
 		netdev_for_each_tx_queue(dev, attach_one_default_qdisc, NULL);
-		dev->qdisc = txq->qdisc_sleeping;
-		qdisc_refcount_inc(dev->qdisc);
+		qdisc = txq->qdisc_sleeping;
+		rcu_assign_pointer(dev->qdisc, qdisc);
+		qdisc_refcount_inc(qdisc);
 		dev->priv_flags ^= IFF_NO_QUEUE;
 	}
 
 #ifdef CONFIG_NET_SCHED
-	if (dev->qdisc != &noop_qdisc)
-		qdisc_hash_add(dev->qdisc, false);
+	if (qdisc != &noop_qdisc)
+		qdisc_hash_add(qdisc, false);
 #endif
 }
 
@@ -1141,7 +1144,7 @@ void dev_activate(struct net_device *dev
 	 * and noqueue_qdisc for virtual interfaces
 	 */
 
-	if (dev->qdisc == &noop_qdisc)
+	if (rtnl_dereference(dev->qdisc) == &noop_qdisc)
 		attach_default_qdiscs(dev);
 
 	if (!netif_carrier_ok(dev))
@@ -1306,7 +1309,7 @@ static int qdisc_change_tx_queue_len(str
 void dev_qdisc_change_real_num_tx(struct net_device *dev,
 				  unsigned int new_real_tx)
 {
-	struct Qdisc *qdisc = dev->qdisc;
+	struct Qdisc *qdisc = rtnl_dereference(dev->qdisc);
 
 	if (qdisc->ops->change_real_num_tx)
 		qdisc->ops->change_real_num_tx(qdisc, new_real_tx);
@@ -1346,7 +1349,7 @@ static void dev_init_scheduler_queue(str
 
 void dev_init_scheduler(struct net_device *dev)
 {
-	dev->qdisc = &noop_qdisc;
+	rcu_assign_pointer(dev->qdisc, &noop_qdisc);
 	netdev_for_each_tx_queue(dev, dev_init_scheduler_queue, &noop_qdisc);
 	if (dev_ingress_queue(dev))
 		dev_init_scheduler_queue(dev, dev_ingress_queue(dev), &noop_qdisc);
@@ -1374,8 +1377,8 @@ void dev_shutdown(struct net_device *dev
 	netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc);
 	if (dev_ingress_queue(dev))
 		shutdown_scheduler_queue(dev, dev_ingress_queue(dev), &noop_qdisc);
-	qdisc_put(dev->qdisc);
-	dev->qdisc = &noop_qdisc;
+	qdisc_put(rtnl_dereference(dev->qdisc));
+	rcu_assign_pointer(dev->qdisc, &noop_qdisc);
 
 	WARN_ON(timer_pending(&dev->watchdog_timer));
 }

[PATCH 5.10 064/121] bonding: fix data-races around agg_select_timer

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 9ceaf6f76b203682bb6100e14b3d7da4c0bedde8 upstream.

syzbot reported that two threads might write over agg_select_timer
at the same time. Make agg_select_timer atomic to fix the races.

BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler

read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1:
 bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 worker_thread+0x616/0xa70 kernel/workqueue.c:2454
 kthread+0x1bf/0x1e0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0:
 bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998
 bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967
 __dev_open+0x274/0x3a0 net/core/dev.c:1407
 dev_open+0x54/0x190 net/core/dev.c:1443
 bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937
 do_set_master net/core/rtnetlink.c:2532 [inline]
 do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736
 __rtnl_newlink net/core/rtnetlink.c:3414 [inline]
 rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529
 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594
 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494
 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmsg+0x195/0x230 net/socket.c:2496
 __do_sys_sendmsg net/socket.c:2505 [inline]
 __se_sys_sendmsg net/socket.c:2503 [inline]
 __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000050 -> 0x0000004f

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G        W         5.17.0-rc4-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/bonding/bond_3ad.c |   30 +++++++++++++++++++++++++-----
 include/net/bond_3ad.h         |    2 +-
 2 files changed, 26 insertions(+), 6 deletions(-)

--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -223,7 +223,7 @@ static inline int __check_agg_selection_
 	if (bond == NULL)
 		return 0;
 
-	return BOND_AD_INFO(bond).agg_select_timer ? 1 : 0;
+	return atomic_read(&BOND_AD_INFO(bond).agg_select_timer) ? 1 : 0;
 }
 
 /**
@@ -1976,7 +1976,7 @@ static void ad_marker_response_received(
  */
 void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout)
 {
-	BOND_AD_INFO(bond).agg_select_timer = timeout;
+	atomic_set(&BOND_AD_INFO(bond).agg_select_timer, timeout);
 }
 
 /**
@@ -2260,6 +2260,28 @@ void bond_3ad_update_ad_actor_settings(s
 }
 
 /**
+ * bond_agg_timer_advance - advance agg_select_timer
+ * @bond:  bonding structure
+ *
+ * Return true when agg_select_timer reaches 0.
+ */
+static bool bond_agg_timer_advance(struct bonding *bond)
+{
+	int val, nval;
+
+	while (1) {
+		val = atomic_read(&BOND_AD_INFO(bond).agg_select_timer);
+		if (!val)
+			return false;
+		nval = val - 1;
+		if (atomic_cmpxchg(&BOND_AD_INFO(bond).agg_select_timer,
+				   val, nval) == val)
+			break;
+	}
+	return nval == 0;
+}
+
+/**
  * bond_3ad_state_machine_handler - handle state machines timeout
  * @work: work context to fetch bonding struct to work on from
  *
@@ -2294,9 +2316,7 @@ void bond_3ad_state_machine_handler(stru
 	if (!bond_has_slaves(bond))
 		goto re_arm;
 
-	/* check if agg_select_timer timer after initialize is timed out */
-	if (BOND_AD_INFO(bond).agg_select_timer &&
-	    !(--BOND_AD_INFO(bond).agg_select_timer)) {
+	if (bond_agg_timer_advance(bond)) {
 		slave = bond_first_slave_rcu(bond);
 		port = slave ? &(SLAVE_AD_INFO(slave)->port) : NULL;
 
--- a/include/net/bond_3ad.h
+++ b/include/net/bond_3ad.h
@@ -262,7 +262,7 @@ struct ad_system {
 struct ad_bond_info {
 	struct ad_system system;	/* 802.3ad system structure */
 	struct bond_3ad_stats stats;
-	u32 agg_select_timer;		/* Timer to select aggregator after all adapter's hand shakes */
+	atomic_t agg_select_timer;		/* Timer to select aggregator after all adapter's hand shakes */
 	u16 aggregator_identifier;
 };
 

[PATCH 5.10 065/121] libsubcmd: Fix use-after-free for realloc(..., 0)

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit 52a9dab6d892763b2a8334a568bd4e2c1a6fde66 upstream.

GCC 12 correctly reports a potential use-after-free condition in the
xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)"
when size == 0:

In file included from help.c:12:
In function 'xrealloc',
    inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
   56 |                 ret = realloc(ptr, size);
      |                       ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
   52 |         void *ret = realloc(ptr, size);
      |                     ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
   58 |                         ret = realloc(ptr, 1);
      |                               ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
   52 |         void *ret = realloc(ptr, size);
      |                     ^~~~~~~~~~~~~~~~~~

Fixes: 2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence")
Reported-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-hardening@vger.kernel.org
Cc: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/lib/subcmd/subcmd-util.h |   11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

--- a/tools/lib/subcmd/subcmd-util.h
+++ b/tools/lib/subcmd/subcmd-util.h
@@ -50,15 +50,8 @@ static NORETURN inline void die(const ch
 static inline void *xrealloc(void *ptr, size_t size)
 {
 	void *ret = realloc(ptr, size);
-	if (!ret && !size)
-		ret = realloc(ptr, 1);
-	if (!ret) {
-		ret = realloc(ptr, size);
-		if (!ret && !size)
-			ret = realloc(ptr, 1);
-		if (!ret)
-			die("Out of memory, realloc failed");
-	}
+	if (!ret)
+		die("Out of memory, realloc failed");
 	return ret;
 }
 

[PATCH 5.10 066/121] dpaa2-eth: Initialize mutex used in one step timestamping path

[Greg Kroah-Hartman]

From: Radu Bulie <radu-andrei.bulie@nxp.com>

commit 07dd44852be89386ab12210df90a2d78779f3bff upstream.

1588 Single Step Timestamping code path uses a mutex to
enforce atomicity for two events:
- update of ptp single step register
- transmit ptp event packet

Before this patch the mutex was not initialized. This
caused unexpected crashes in the Tx function.

Fixes: c55211892f463 ("dpaa2-eth: support PTP Sync packet one-step timestamping")
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -4225,7 +4225,7 @@ static int dpaa2_eth_probe(struct fsl_mc
 	}
 
 	INIT_WORK(&priv->tx_onestep_tstamp, dpaa2_eth_tx_onestep_tstamp);
-
+	mutex_init(&priv->onestep_tstamp_lock);
 	skb_queue_head_init(&priv->tx_skbs);
 
 	/* Obtain a MC portal */

[PATCH 5.10 067/121] perf bpf: Defer freeing string after possible strlen() on it

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

commit 31ded1535e3182778a1d0e5c32711f55da3bc512 upstream.

This was detected by the gcc in Fedora Rawhide's gcc:

  50    11.01 fedora:rawhide                : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC)
        inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9:
    util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free]
     1225 |                 *key_scan_pos += strlen(map_opt);
          |                                  ^~~~~~~~~~~~~~~
    util/bpf-loader.c:1223:9: note: call to 'free' here
     1223 |         free(map_name);
          |         ^~~~~~~~~~~~~~
    cc1: all warnings being treated as errors

So do the calculations on the pointer before freeing it.

Fixes: 04f9bf2bac72480c ("perf bpf-loader: Add missing '*' for key_scan_pos")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/lkml/Yg1VtQxKrPpS3uNA@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/bpf-loader.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/tools/perf/util/bpf-loader.c
+++ b/tools/perf/util/bpf-loader.c
@@ -1215,9 +1215,10 @@ bpf__obj_config_map(struct bpf_object *o
 	pr_debug("ERROR: Invalid map config option '%s'\n", map_opt);
 	err = -BPF_LOADER_ERRNO__OBJCONF_MAP_OPT;
 out:
-	free(map_name);
 	if (!err)
 		*key_scan_pos += strlen(map_opt);
+
+	free(map_name);
 	return err;
 }
 

[PATCH 5.10 068/121] selftests/exec: Add non-regular to TEST_GEN_PROGS

[Greg Kroah-Hartman]

From: Muhammad Usama Anjum <usama.anjum@collabora.com>

commit a7e793a867ae312cecdeb6f06cceff98263e75dd upstream.

non-regular file needs to be compiled and then copied to the output
directory. Remove it from TEST_PROGS and add it to TEST_GEN_PROGS. This
removes error thrown by rsync when non-regular object isn't found:

rsync: [sender] link_stat "/linux/tools/testing/selftests/exec/non-regular" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3]

Fixes: 0f71241a8e32 ("selftests/exec: add file type errno tests")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/exec/Makefile |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/exec/Makefile
+++ b/tools/testing/selftests/exec/Makefile
@@ -3,8 +3,8 @@ CFLAGS = -Wall
 CFLAGS += -Wno-nonnull
 CFLAGS += -D_GNU_SOURCE
 
-TEST_PROGS := binfmt_script non-regular
-TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216
+TEST_PROGS := binfmt_script
+TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216 non-regular
 TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir
 # Makefile is a run-time dependency, since it's accessed by the execveat test
 TEST_FILES := Makefile

[PATCH 5.10 069/121] ALSA: hda/realtek: Add quirk for Legion Y9000X 2019

[Greg Kroah-Hartman]

From: Yu Huang <diwang90@gmail.com>

commit c07f2c7b45413a9e50ba78630fda04ecfa17b4f2 upstream.

Legion Y9000X 2019 has the same speaker with Y9000X 2020,
but with a different quirk address. Add one quirk entry
to make the speaker work on Y9000X 2019 too.

Signed-off-by: Yu Huang <diwang90@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220212160835.165065-1-diwang90@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8948,6 +8948,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x17aa, 0x3824, "Legion Y9000X 2020", ALC285_FIXUP_LEGION_Y9000X_SPEAKERS),
 	SND_PCI_QUIRK(0x17aa, 0x3827, "Ideapad S740", ALC285_FIXUP_IDEAPAD_S740_COEF),
 	SND_PCI_QUIRK(0x17aa, 0x3834, "Lenovo IdeaPad Slim 9i 14ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS),
+	SND_PCI_QUIRK(0x17aa, 0x383d, "Legion Y9000X 2019", ALC285_FIXUP_LEGION_Y9000X_SPEAKERS),
 	SND_PCI_QUIRK(0x17aa, 0x3843, "Yoga 9i", ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP),
 	SND_PCI_QUIRK(0x17aa, 0x384a, "Lenovo Yoga 7 15ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS),
 	SND_PCI_QUIRK(0x17aa, 0x3852, "Lenovo Yoga 7 14ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS),

[PATCH 5.10 070/121] ALSA: hda/realtek: Fix deadlock by COEF mutex

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 2a845837e3d0ddaed493b4c5c4643d7f0542804d upstream.

The recently introduced coef_mutex for Realtek codec seems causing a
deadlock when the relevant code is invoked from the power-off state;
then the HD-audio core tries to power-up internally, and this kicks
off the codec runtime PM code that tries to take the same coef_mutex.

In order to avoid the deadlock, do the temporary power up/down around
the coef_mutex acquisition and release.  This assures that the
power-up sequence runs before the mutex, hence no re-entrance will
happen.

Fixes: b837a9f5ab3b ("ALSA: hda: realtek: Fix race at concurrent COEF updates")
Reported-and-tested-by: Julian Wollrath <jwollrath@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220214132838.4db10fca@schienar
Link: https://lore.kernel.org/r/20220214130410.21230-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   39 ++++++++++++++++++++++++---------------
 1 file changed, 24 insertions(+), 15 deletions(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -134,6 +134,22 @@ struct alc_spec {
  * COEF access helper functions
  */
 
+static void coef_mutex_lock(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	snd_hda_power_up_pm(codec);
+	mutex_lock(&spec->coef_mutex);
+}
+
+static void coef_mutex_unlock(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	mutex_unlock(&spec->coef_mutex);
+	snd_hda_power_down_pm(codec);
+}
+
 static int __alc_read_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
 				 unsigned int coef_idx)
 {
@@ -147,12 +163,11 @@ static int __alc_read_coefex_idx(struct
 static int alc_read_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
 			       unsigned int coef_idx)
 {
-	struct alc_spec *spec = codec->spec;
 	unsigned int val;
 
-	mutex_lock(&spec->coef_mutex);
+	coef_mutex_lock(codec);
 	val = __alc_read_coefex_idx(codec, nid, coef_idx);
-	mutex_unlock(&spec->coef_mutex);
+	coef_mutex_unlock(codec);
 	return val;
 }
 
@@ -169,11 +184,9 @@ static void __alc_write_coefex_idx(struc
 static void alc_write_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
 				 unsigned int coef_idx, unsigned int coef_val)
 {
-	struct alc_spec *spec = codec->spec;
-
-	mutex_lock(&spec->coef_mutex);
+	coef_mutex_lock(codec);
 	__alc_write_coefex_idx(codec, nid, coef_idx, coef_val);
-	mutex_unlock(&spec->coef_mutex);
+	coef_mutex_unlock(codec);
 }
 
 #define alc_write_coef_idx(codec, coef_idx, coef_val) \
@@ -194,11 +207,9 @@ static void alc_update_coefex_idx(struct
 				  unsigned int coef_idx, unsigned int mask,
 				  unsigned int bits_set)
 {
-	struct alc_spec *spec = codec->spec;
-
-	mutex_lock(&spec->coef_mutex);
+	coef_mutex_lock(codec);
 	__alc_update_coefex_idx(codec, nid, coef_idx, mask, bits_set);
-	mutex_unlock(&spec->coef_mutex);
+	coef_mutex_unlock(codec);
 }
 
 #define alc_update_coef_idx(codec, coef_idx, mask, bits_set)	\
@@ -231,9 +242,7 @@ struct coef_fw {
 static void alc_process_coef_fw(struct hda_codec *codec,
 				const struct coef_fw *fw)
 {
-	struct alc_spec *spec = codec->spec;
-
-	mutex_lock(&spec->coef_mutex);
+	coef_mutex_lock(codec);
 	for (; fw->nid; fw++) {
 		if (fw->mask == (unsigned short)-1)
 			__alc_write_coefex_idx(codec, fw->nid, fw->idx, fw->val);
@@ -241,7 +250,7 @@ static void alc_process_coef_fw(struct h
 			__alc_update_coefex_idx(codec, fw->nid, fw->idx,
 						fw->mask, fw->val);
 	}
-	mutex_unlock(&spec->coef_mutex);
+	coef_mutex_unlock(codec);
 }
 
 /*

[PATCH 5.10 071/121] ALSA: hda: Fix regression on forced probe mask option

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 6317f7449348a897483a2b4841f7a9190745c81b upstream.

The forced probe mask via probe_mask 0x100 bit doesn't work any longer
as expected since the bus init code was moved and it's clearing the
codec_mask value that was set beforehand.  This patch fixes the
long-time regression by moving the check_probe_mask() call.

Fixes: a41d122449be ("ALSA: hda - Embed bus into controller object")
Reported-by: dmummenschanz@web.de
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22
Link: https://lore.kernel.org/r/20220214100020.8870-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/hda_intel.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1837,8 +1837,6 @@ static int azx_create(struct snd_card *c
 
 	assign_position_fix(chip, check_position_fix(chip, position_fix[dev]));
 
-	check_probe_mask(chip, dev);
-
 	if (single_cmd < 0) /* allow fallback to single_cmd at errors */
 		chip->fallback_to_single_cmd = 1;
 	else /* explicitly set to single_cmd or not */
@@ -1866,6 +1864,8 @@ static int azx_create(struct snd_card *c
 		chip->bus.core.needs_damn_long_delay = 1;
 	}
 
+	check_probe_mask(chip, dev);
+
 	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
 	if (err < 0) {
 		dev_err(card->dev, "Error creating device [card]!\n");

[PATCH 5.10 072/121] ALSA: hda: Fix missing codec probe on Shenker Dock 15

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit dd8e5b161d7fb9cefa1f1d6e35a39b9e1563c8d3 upstream.

By some unknown reason, BIOS on Shenker Dock 15 doesn't set up the
codec mask properly for the onboard audio.  Let's set the forced codec
mask to enable the codec discovery.

Reported-by: dmummenschanz@web.de
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22
Link: https://lore.kernel.org/r/20220214100020.8870-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/hda_intel.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1652,6 +1652,7 @@ static const struct snd_pci_quirk probe_
 	/* forced codec slots */
 	SND_PCI_QUIRK(0x1043, 0x1262, "ASUS W5Fm", 0x103),
 	SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103),
+	SND_PCI_QUIRK(0x1558, 0x0351, "Schenker Dock 15", 0x105),
 	/* WinFast VP200 H (Teradici) user reported broken communication */
 	SND_PCI_QUIRK(0x3a21, 0x040d, "WinFast VP200 H", 0x101),
 	{}

[PATCH 5.10 073/121] ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 564778d7b1ea465f9487eedeece7527a033549c5 upstream.

When writing out a stereo control we discard the change notification from
the first channel, meaning that events are only generated based on changes
to the second channel. Ensure that we report a change if either channel
has changed.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220201155629.120510-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -308,7 +308,7 @@ int snd_soc_put_volsw(struct snd_kcontro
 	unsigned int sign_bit = mc->sign_bit;
 	unsigned int mask = (1 << fls(max)) - 1;
 	unsigned int invert = mc->invert;
-	int err;
+	int err, ret;
 	bool type_2r = false;
 	unsigned int val2 = 0;
 	unsigned int val, val_mask;
@@ -350,12 +350,18 @@ int snd_soc_put_volsw(struct snd_kcontro
 	err = snd_soc_component_update_bits(component, reg, val_mask, val);
 	if (err < 0)
 		return err;
+	ret = err;
 
-	if (type_2r)
+	if (type_2r) {
 		err = snd_soc_component_update_bits(component, reg2, val_mask,
-			val2);
+						    val2);
+		/* Don't discard any error code or drop change flag */
+		if (ret == 0 || err < 0) {
+			ret = err;
+		}
+	}
 
-	return err;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(snd_soc_put_volsw);
 

[PATCH 5.10 074/121] ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_range()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 650204ded3703b5817bd4b6a77fa47d333c4f902 upstream.

When writing out a stereo control we discard the change notification from
the first channel, meaning that events are only generated based on changes
to the second channel. Ensure that we report a change if either channel
has changed.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220201155629.120510-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -510,7 +510,7 @@ int snd_soc_put_volsw_range(struct snd_k
 	unsigned int mask = (1 << fls(max)) - 1;
 	unsigned int invert = mc->invert;
 	unsigned int val, val_mask;
-	int ret;
+	int err, ret;
 
 	if (invert)
 		val = (max - ucontrol->value.integer.value[0]) & mask;
@@ -519,9 +519,10 @@ int snd_soc_put_volsw_range(struct snd_k
 	val_mask = mask << shift;
 	val = val << shift;
 
-	ret = snd_soc_component_update_bits(component, reg, val_mask, val);
-	if (ret < 0)
-		return ret;
+	err = snd_soc_component_update_bits(component, reg, val_mask, val);
+	if (err < 0)
+		return err;
+	ret = err;
 
 	if (snd_soc_volsw_is_stereo(mc)) {
 		if (invert)
@@ -531,8 +532,12 @@ int snd_soc_put_volsw_range(struct snd_k
 		val_mask = mask << shift;
 		val = val << shift;
 
-		ret = snd_soc_component_update_bits(component, rreg, val_mask,
+		err = snd_soc_component_update_bits(component, rreg, val_mask,
 			val);
+		/* Don't discard any error code or drop change flag */
+		if (ret == 0 || err < 0) {
+			ret = err;
+		}
 	}
 
 	return ret;

[PATCH 5.10 075/121] powerpc/lib/sstep: fix ptesync build error

[Greg Kroah-Hartman]

From: Anders Roxell <anders.roxell@linaro.org>

commit fe663df7825811358531dc2e8a52d9eaa5e3515e upstream.

Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:

  {standard input}: Assembler messages:
  {standard input}:2088: Error: unrecognized opcode: `ptesync'
  make[3]: *** [/builds/linux/scripts/Makefile.build:287: arch/powerpc/lib/sstep.o] Error 1

Add the 'ifdef CONFIG_PPC64' around the 'ptesync' in function
'emulate_update_regs()' to like it is in 'analyse_instr()'. Since it looks like
it got dropped inadvertently by commit 3cdfcbfd32b9 ("powerpc: Change
analyse_instr so it doesn't modify *regs").

A key detail is that analyse_instr() will never recognise lwsync or
ptesync on 32-bit (because of the existing ifdef), and as a result
emulate_update_regs() should never be called with an op specifying
either of those on 32-bit. So removing them from emulate_update_regs()
should be a nop in terms of runtime behaviour.

Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs")
Cc: stable@vger.kernel.org # v4.14+
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
[mpe: Add last paragraph of change log mentioning analyse_instr() details]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220211005113.1361436-1-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/lib/sstep.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -3062,12 +3062,14 @@ void emulate_update_regs(struct pt_regs
 		case BARRIER_EIEIO:
 			eieio();
 			break;
+#ifdef CONFIG_PPC64
 		case BARRIER_LWSYNC:
 			asm volatile("lwsync" : : : "memory");
 			break;
 		case BARRIER_PTESYNC:
 			asm volatile("ptesync" : : : "memory");
 			break;
+#endif
 		}
 		break;
 

[PATCH 5.10 076/121] mtd: rawnand: gpmi: dont leak PM reference in error path

[Greg Kroah-Hartman]

From: Christian Eggers <ceggers@arri.de>

commit 9161f365c91614e5a3f5c6dcc44c3b1b33bc59c0 upstream.

If gpmi_nfc_apply_timings() fails, the PM runtime usage counter must be
dropped.

Reported-by: Pavel Machek <pavel@denx.de>
Fixes: f53d4c109a66 ("mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220125081619.6286-1-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -2291,7 +2291,7 @@ static int gpmi_nfc_exec_op(struct nand_
 		this->hw.must_apply_timings = false;
 		ret = gpmi_nfc_apply_timings(this);
 		if (ret)
-			return ret;
+			goto out_pm;
 	}
 
 	dev_dbg(this->dev, "%s: %d instructions\n", __func__, op->ninstrs);
@@ -2420,6 +2420,7 @@ unmap:
 
 	this->bch = false;
 
+out_pm:
 	pm_runtime_mark_last_busy(this->dev);
 	pm_runtime_put_autosuspend(this->dev);
 

[PATCH 5.10 077/121] KVM: SVM: Never reject emulation due to SMAP errata for !SEV guests

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit 55467fcd55b89c622e62b4afe60ac0eb2fae91f2 upstream.

Always signal that emulation is possible for !SEV guests regardless of
whether or not the CPU provided a valid instruction byte stream.  KVM can
read all guest state (memory and registers) for !SEV guests, i.e. can
fetch the code stream from memory even if the CPU failed to do so because
of the SMAP errata.

Fixes: 05d5a4863525 ("KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)")
Cc: stable@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[jwang: adjust context for kernel 5.10.101]
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/svm/svm.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4103,6 +4103,10 @@ static bool svm_can_emulate_instruction(
 	bool smep, smap, is_user;
 	unsigned long cr4;
 
+	/* Emulation is always possible when KVM has access to all guest state. */
+	if (!sev_guest(vcpu->kvm))
+		return true;
+
 	/*
 	 * Detect and workaround Errata 1096 Fam_17h_00_0Fh.
 	 *
@@ -4151,9 +4155,6 @@ static bool svm_can_emulate_instruction(
 	smap = cr4 & X86_CR4_SMAP;
 	is_user = svm_get_cpl(vcpu) == 3;
 	if (smap && (!smep || is_user)) {
-		if (!sev_guest(vcpu->kvm))
-			return true;
-
 		pr_err_ratelimited("KVM: SEV Guest triggered AMD Erratum 1096\n");
 
 		/*

[PATCH 5.10 078/121] tee: export teedev_open() and teedev_close_context()

[Greg Kroah-Hartman]

From: Jens Wiklander <jens.wiklander@linaro.org>

commit 1e2c3ef0496e72ba9001da5fd1b7ed56ccb30597 upstream.

Exports the two functions teedev_open() and teedev_close_context() in
order to make it easier to create a driver internal struct tee_context.

Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tee/tee_core.c  |    6 ++++--
 include/linux/tee_drv.h |   14 ++++++++++++++
 2 files changed, 18 insertions(+), 2 deletions(-)

--- a/drivers/tee/tee_core.c
+++ b/drivers/tee/tee_core.c
@@ -43,7 +43,7 @@ static DEFINE_SPINLOCK(driver_lock);
 static struct class *tee_class;
 static dev_t tee_devt;
 
-static struct tee_context *teedev_open(struct tee_device *teedev)
+struct tee_context *teedev_open(struct tee_device *teedev)
 {
 	int rc;
 	struct tee_context *ctx;
@@ -70,6 +70,7 @@ err:
 	return ERR_PTR(rc);
 
 }
+EXPORT_SYMBOL_GPL(teedev_open);
 
 void teedev_ctx_get(struct tee_context *ctx)
 {
@@ -96,13 +97,14 @@ void teedev_ctx_put(struct tee_context *
 	kref_put(&ctx->refcount, teedev_ctx_release);
 }
 
-static void teedev_close_context(struct tee_context *ctx)
+void teedev_close_context(struct tee_context *ctx)
 {
 	struct tee_device *teedev = ctx->teedev;
 
 	teedev_ctx_put(ctx);
 	tee_device_put(teedev);
 }
+EXPORT_SYMBOL_GPL(teedev_close_context);
 
 static int tee_open(struct inode *inode, struct file *filp)
 {
--- a/include/linux/tee_drv.h
+++ b/include/linux/tee_drv.h
@@ -582,4 +582,18 @@ struct tee_client_driver {
 #define to_tee_client_driver(d) \
 		container_of(d, struct tee_client_driver, driver)
 
+/**
+ * teedev_open() - Open a struct tee_device
+ * @teedev:	Device to open
+ *
+ * @return a pointer to struct tee_context on success or an ERR_PTR on failure.
+ */
+struct tee_context *teedev_open(struct tee_device *teedev);
+
+/**
+ * teedev_close_context() - closes a struct tee_context
+ * @ctx:	The struct tee_context to close
+ */
+void teedev_close_context(struct tee_context *ctx);
+
 #endif /*__TEE_DRV_H*/

[PATCH 5.10 079/121] optee: use driver internal tee_context for some rpc

[Greg Kroah-Hartman]

From: Jens Wiklander <jens.wiklander@linaro.org>

commit aceeafefff736057e8f93f19bbfbef26abd94604 upstream.

Adds a driver private tee_context by moving the tee_context in struct
optee_notif to struct optee. This tee_context was previously used when
doing internal calls to secure world to deliver notification.

The new driver internal tee_context is now also when allocating driver
private shared memory. This decouples the shared memory object from its
original tee_context. This is needed when the life time of such a memory
allocation outlives the client tee_context.

This patch fixes the problem described below:

The addition of a shutdown hook by commit f25889f93184 ("optee: fix tee out
of memory failure seen during kexec reboot") introduced a kernel shutdown
regression that can be triggered after running the OP-TEE xtest suites.

Once the shutdown hook is called it is not possible to communicate any more
with the supplicant process because the system is not scheduling task any
longer. Thus if the optee driver shutdown path receives a supplicant RPC
request from the OP-TEE we will deadlock the kernel's shutdown.

Fixes: f25889f93184 ("optee: fix tee out of memory failure seen during kexec reboot")
Fixes: 217e0250cccb ("tee: use reference counting for tee_context")
Reported-by: Lars Persson <larper@axis.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
[JW: backport to 5.10-stable]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tee/optee/core.c          |    8 ++++++++
 drivers/tee/optee/optee_private.h |    2 ++
 drivers/tee/optee/rpc.c           |    8 +++++---
 3 files changed, 15 insertions(+), 3 deletions(-)

--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -588,6 +588,7 @@ static int optee_remove(struct platform_
 	/* Unregister OP-TEE specific client devices on TEE bus */
 	optee_unregister_devices();
 
+	teedev_close_context(optee->ctx);
 	/*
 	 * Ask OP-TEE to free all cached shared memory objects to decrease
 	 * reference counters and also avoid wild pointers in secure world
@@ -633,6 +634,7 @@ static int optee_probe(struct platform_d
 	struct optee *optee = NULL;
 	void *memremaped_shm = NULL;
 	struct tee_device *teedev;
+	struct tee_context *ctx;
 	u32 sec_caps;
 	int rc;
 
@@ -719,6 +721,12 @@ static int optee_probe(struct platform_d
 	optee_supp_init(&optee->supp);
 	optee->memremaped_shm = memremaped_shm;
 	optee->pool = pool;
+	ctx = teedev_open(optee->teedev);
+	if (IS_ERR(ctx)) {
+		rc = rc = PTR_ERR(ctx);
+		goto err;
+	}
+	optee->ctx = ctx;
 
 	/*
 	 * Ensure that there are no pre-existing shm objects before enabling
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -70,6 +70,7 @@ struct optee_supp {
  * struct optee - main service struct
  * @supp_teedev:	supplicant device
  * @teedev:		client device
+ * @ctx:		driver internal TEE context
  * @invoke_fn:		function to issue smc or hvc
  * @call_queue:		queue of threads waiting to call @invoke_fn
  * @wait_queue:		queue of threads from secure world waiting for a
@@ -87,6 +88,7 @@ struct optee {
 	struct tee_device *supp_teedev;
 	struct tee_device *teedev;
 	optee_invoke_fn *invoke_fn;
+	struct tee_context *ctx;
 	struct optee_call_queue call_queue;
 	struct optee_wait_queue wait_queue;
 	struct optee_supp supp;
--- a/drivers/tee/optee/rpc.c
+++ b/drivers/tee/optee/rpc.c
@@ -284,6 +284,7 @@ static struct tee_shm *cmd_alloc_suppl(s
 }
 
 static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
+					  struct optee *optee,
 					  struct optee_msg_arg *arg,
 					  struct optee_call_ctx *call_ctx)
 {
@@ -313,7 +314,8 @@ static void handle_rpc_func_cmd_shm_allo
 		shm = cmd_alloc_suppl(ctx, sz);
 		break;
 	case OPTEE_MSG_RPC_SHM_TYPE_KERNEL:
-		shm = tee_shm_alloc(ctx, sz, TEE_SHM_MAPPED | TEE_SHM_PRIV);
+		shm = tee_shm_alloc(optee->ctx, sz,
+				    TEE_SHM_MAPPED | TEE_SHM_PRIV);
 		break;
 	default:
 		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
@@ -470,7 +472,7 @@ static void handle_rpc_func_cmd(struct t
 		break;
 	case OPTEE_MSG_RPC_CMD_SHM_ALLOC:
 		free_pages_list(call_ctx);
-		handle_rpc_func_cmd_shm_alloc(ctx, arg, call_ctx);
+		handle_rpc_func_cmd_shm_alloc(ctx, optee, arg, call_ctx);
 		break;
 	case OPTEE_MSG_RPC_CMD_SHM_FREE:
 		handle_rpc_func_cmd_shm_free(ctx, arg);
@@ -501,7 +503,7 @@ void optee_handle_rpc(struct tee_context
 
 	switch (OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0)) {
 	case OPTEE_SMC_RPC_FUNC_ALLOC:
-		shm = tee_shm_alloc(ctx, param->a1,
+		shm = tee_shm_alloc(optee->ctx, param->a1,
 				    TEE_SHM_MAPPED | TEE_SHM_PRIV);
 		if (!IS_ERR(shm) && !tee_shm_get_pa(shm, 0, &pa)) {
 			reg_pair_from_64(&param->a1, &param->a2, pa);

[PATCH 5.10 080/121] ASoC: tas2770: Insert post reset delay

[Greg Kroah-Hartman]

From: Martin Povišer <povik+lin@cutebit.org>

commit 307f31452078792aab94a729fce33200c6e42dc4 upstream.

Per TAS2770 datasheet there must be a 1 ms delay from reset to first
command. So insert delays into the driver where appropriate.

Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220204095301.5554-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/tas2770.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -38,10 +38,12 @@ static void tas2770_reset(struct tas2770
 		gpiod_set_value_cansleep(tas2770->reset_gpio, 0);
 		msleep(20);
 		gpiod_set_value_cansleep(tas2770->reset_gpio, 1);
+		usleep_range(1000, 2000);
 	}
 
 	snd_soc_component_write(tas2770->component, TAS2770_SW_RST,
 		TAS2770_RST);
+	usleep_range(1000, 2000);
 }
 
 static int tas2770_set_bias_level(struct snd_soc_component *component,
@@ -110,6 +112,7 @@ static int tas2770_codec_resume(struct s
 
 	if (tas2770->sdz_gpio) {
 		gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
+		usleep_range(1000, 2000);
 	} else {
 		ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL,
 						    TAS2770_PWR_CTRL_MASK,
@@ -510,8 +513,10 @@ static int tas2770_codec_probe(struct sn
 
 	tas2770->component = component;
 
-	if (tas2770->sdz_gpio)
+	if (tas2770->sdz_gpio) {
 		gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
+		usleep_range(1000, 2000);
+	}
 
 	tas2770_reset(tas2770);
 

[PATCH 5.10 081/121] block/wbt: fix negative inflight counter when remove scsi device

[Greg Kroah-Hartman]

From: Laibin Qiu <qiulaibin@huawei.com>

commit e92bc4cd34de2ce454bdea8cd198b8067ee4e123 upstream.

Now that we disable wbt by set WBT_STATE_OFF_DEFAULT in
wbt_disable_default() when switch elevator to bfq. And when
we remove scsi device, wbt will be enabled by wbt_enable_default.
If it become false positive between wbt_wait() and wbt_track()
when submit write request.

The following is the scenario that triggered the problem.

T1                          T2                           T3
                            elevator_switch_mq
                            bfq_init_queue
                            wbt_disable_default <= Set
                            rwb->enable_state (OFF)
Submit_bio
blk_mq_make_request
rq_qos_throttle
<= rwb->enable_state (OFF)
                                                         scsi_remove_device
                                                         sd_remove
                                                         del_gendisk
                                                         blk_unregister_queue
                                                         elv_unregister_queue
                                                         wbt_enable_default
                                                         <= Set rwb->enable_state (ON)
q_qos_track
<= rwb->enable_state (ON)
^^^^^^ this request will mark WBT_TRACKED without inflight add and will
lead to drop rqw->inflight to -1 in wbt_done() which will trigger IO hung.

Fix this by move wbt_enable_default() from elv_unregister to
bfq_exit_queue(). Only re-enable wbt when bfq exit.

Fixes: 76a8040817b4b ("blk-wbt: make sure throttle is enabled properly")

Remove oneline stale comment, and kill one oneshot local variable.

Signed-off-by: Ming Lei <ming.lei@rehdat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-block/20211214133103.551813-1-qiulaibin@huawei.com/
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 block/bfq-iosched.c |    2 ++
 block/elevator.c    |    2 --
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -6404,6 +6404,8 @@ static void bfq_exit_queue(struct elevat
 	spin_unlock_irq(&bfqd->lock);
 #endif
 
+	wbt_enable_default(bfqd->queue);
+
 	kfree(bfqd);
 }
 
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -518,8 +518,6 @@ void elv_unregister_queue(struct request
 		kobject_del(&e->kobj);
 
 		e->registered = 0;
-		/* Re-enable throttling in case elevator disabled it */
-		wbt_enable_default(q);
 	}
 }
 

[PATCH 5.10 082/121] NFS: LOOKUP_DIRECTORY is also ok with symlinks

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit e0caaf75d443e02e55e146fd75fe2efc8aed5540 upstream.

Commit ac795161c936 (NFSv4: Handle case where the lookup of a directory
fails) [1], part of Linux since 5.17-rc2, introduced a regression, where
a symbolic link on an NFS mount to a directory on another NFS does not
resolve(?) the first time it is accessed:

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes: ac795161c936 ("NFSv4: Handle case where the lookup of a directory fails")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/dir.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1780,14 +1780,14 @@ no_open:
 	if (!res) {
 		inode = d_inode(dentry);
 		if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
-		    !S_ISDIR(inode->i_mode))
+		    !(S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)))
 			res = ERR_PTR(-ENOTDIR);
 		else if (inode && S_ISREG(inode->i_mode))
 			res = ERR_PTR(-EOPENSTALE);
 	} else if (!IS_ERR(res)) {
 		inode = d_inode(res);
 		if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
-		    !S_ISDIR(inode->i_mode)) {
+		    !(S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))) {
 			dput(res);
 			res = ERR_PTR(-ENOTDIR);
 		} else if (inode && S_ISREG(inode->i_mode)) {

[PATCH 5.10 083/121] NFS: Do not report writeback errors in nfs_getattr()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit d19e0183a88306acda07f4a01fedeeffe2a2a06b upstream.

The result of the writeback, whether it is an ENOSPC or an EIO, or
anything else, does not inhibit the NFS client from reporting the
correct file timestamps.

Fixes: 79566ef018f5 ("NFS: Getattr doesn't require data sync semantics")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/inode.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -807,12 +807,9 @@ int nfs_getattr(const struct path *path,
 	}
 
 	/* Flush out writes to the server in order to update c/mtime.  */
-	if ((request_mask & (STATX_CTIME|STATX_MTIME)) &&
-			S_ISREG(inode->i_mode)) {
-		err = filemap_write_and_wait(inode->i_mapping);
-		if (err)
-			goto out;
-	}
+	if ((request_mask & (STATX_CTIME | STATX_MTIME)) &&
+	    S_ISREG(inode->i_mode))
+		filemap_write_and_wait(inode->i_mapping);
 
 	/*
 	 * We may force a getattr if the user cares about atime.

[PATCH 5.10 084/121] tty: n_tty: do not look ahead for EOL character past the end of the buffer

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 3593030761630e09200072a4bd06468892c27be3 upstream.

Daniel Gibson reports that the n_tty code gets line termination wrong in
very specific cases:

 "If you feed a line with exactly 64 chars + terminating newline, and
  directly afterwards (without reading) another line into a pseudo
  terminal, the the first read() on the other side will return the 64
  char line *without* terminating newline, and the next read() will
  return the missing terminating newline AND the complete next line (if
  it fits in the buffer)"

and bisected the behavior to commit 3b830a9c34d5 ("tty: convert
tty_ldisc_ops 'read()' function to take a kernel pointer").

Now, digging deeper, it turns out that the behavior isn't exactly new:
what changed in commit 3b830a9c34d5 was that the tty line discipline
.read() function is now passed an intermediate kernel buffer rather than
the final user space buffer.

And that intermediate kernel buffer is 64 bytes in size - thus that
special case with exactly 64 bytes plus terminating newline.

The same problem did exist before, but historically the boundary was not
the 64-byte chunk, but the user-supplied buffer size, which is obviously
generally bigger (and potentially bigger than N_TTY_BUF_SIZE, which
would hide the issue entirely).

The reason is that the n_tty canon_copy_from_read_buf() code would look
ahead for the EOL character one byte further than it would actually
copy.  It would then decide that it had found the terminator, and unmark
it as an EOL character - which in turn explains why the next read
wouldn't then be terminated by it.

Now, the reason it did all this in the first place is related to some
historical and pretty obscure EOF behavior, see commit ac8f3bf8832a
("n_tty: Fix poll() after buffer-limited eof push read") and commit
40d5e0905a03 ("n_tty: Fix EOF push handling").

And the reason for the EOL confusion is that we treat EOF as a special
EOL condition, with the EOL character being NUL (aka "__DISABLED_CHAR"
in the kernel sources).

So that EOF look-ahead also affects the normal EOL handling.

This patch just removes the look-ahead that causes problems, because EOL
is much more critical than the historical "EOF in the middle of a line
that coincides with the end of the buffer" handling ever was.

Now, it is possible that we should indeed re-introduce the "look at next
character to see if it's a EOF" behavior, but if so, that should be done
not at the kernel buffer chunk boundary in canon_copy_from_read_buf(),
but at a higher level, when we run out of the user buffer.

In particular, the place to do that would be at the top of
'n_tty_read()', where we check if it's a continuation of a previously
started read, and there is no more buffer space left, we could decide to
just eat the __DISABLED_CHAR at that point.

But that would be a separate patch, because I suspect nobody actually
cares, and I'd like to get a report about it before bothering.

Fixes: 3b830a9c34d5 ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer")
Fixes: ac8f3bf8832a ("n_tty: Fix  poll() after buffer-limited eof push read")
Fixes: 40d5e0905a03 ("n_tty: Fix EOF push handling")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215611
Reported-and-tested-by: Daniel Gibson <metalcaedes@gmail.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -2024,7 +2024,7 @@ static bool canon_copy_from_read_buf(str
 		return false;
 
 	canon_head = smp_load_acquire(&ldata->canon_head);
-	n = min(*nr + 1, canon_head - ldata->read_tail);
+	n = min(*nr, canon_head - ldata->read_tail);
 
 	tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
 	size = min_t(size_t, tail + n, N_TTY_BUF_SIZE);
@@ -2046,10 +2046,8 @@ static bool canon_copy_from_read_buf(str
 		n += N_TTY_BUF_SIZE;
 	c = n + found;
 
-	if (!found || read_buf(ldata, eol) != __DISABLED_CHAR) {
-		c = min(*nr, c);
+	if (!found || read_buf(ldata, eol) != __DISABLED_CHAR)
 		n = c;
-	}
 
 	n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu tail:%zu more:%zu\n",
 		    __func__, eol, found, n, c, tail, more);

[PATCH 5.10 085/121] mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe()

[Greg Kroah-Hartman]

From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

commit 5c23b3f965bc9ee696bf2ed4bdc54d339dd9a455 upstream.

Interacting with a NAND chip on an IPQ6018 I found that the qcomsmem NAND
partition parser was returning -EPROBE_DEFER waiting for the main smem
driver to load.

This caused the board to reset. Playing about with the probe() function
shows that the problem lies in the core clock being switched off before the
nandc_unalloc() routine has completed.

If we look at how qcom_nandc_remove() tears down allocated resources we see
the expected order is

qcom_nandc_unalloc(nandc);

clk_disable_unprepare(nandc->aon_clk);
clk_disable_unprepare(nandc->core_clk);

dma_unmap_resource(&pdev->dev, nandc->base_dma, resource_size(res),
		   DMA_BIDIRECTIONAL, 0);

Tweaking probe() to both bring up and tear-down in that order removes the
reset if we end up deferring elsewhere.

Fixes: c76b78d8ec05 ("mtd: nand: Qualcomm NAND controller driver")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220103030316.58301-2-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2,7 +2,6 @@
 /*
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
  */
-
 #include <linux/clk.h>
 #include <linux/slab.h>
 #include <linux/bitops.h>
@@ -2968,10 +2967,6 @@ static int qcom_nandc_probe(struct platf
 	if (!nandc->base_dma)
 		return -ENXIO;
 
-	ret = qcom_nandc_alloc(nandc);
-	if (ret)
-		goto err_nandc_alloc;
-
 	ret = clk_prepare_enable(nandc->core_clk);
 	if (ret)
 		goto err_core_clk;
@@ -2980,6 +2975,10 @@ static int qcom_nandc_probe(struct platf
 	if (ret)
 		goto err_aon_clk;
 
+	ret = qcom_nandc_alloc(nandc);
+	if (ret)
+		goto err_nandc_alloc;
+
 	ret = qcom_nandc_setup(nandc);
 	if (ret)
 		goto err_setup;
@@ -2991,15 +2990,14 @@ static int qcom_nandc_probe(struct platf
 	return 0;
 
 err_setup:
+	qcom_nandc_unalloc(nandc);
+err_nandc_alloc:
 	clk_disable_unprepare(nandc->aon_clk);
 err_aon_clk:
 	clk_disable_unprepare(nandc->core_clk);
 err_core_clk:
-	qcom_nandc_unalloc(nandc);
-err_nandc_alloc:
 	dma_unmap_resource(dev, res->start, resource_size(res),
 			   DMA_BIDIRECTIONAL, 0);
-
 	return ret;
 }
 

[PATCH 5.10 086/121] mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status

[Greg Kroah-Hartman]

From: david regan <dregan@mail.com>

commit 36415a7964711822e63695ea67fede63979054d9 upstream.

The brcmnand driver contains a bug in which if a page (example 2k byte)
is read from the parallel/ONFI NAND and within that page a subpage (512
byte) has correctable errors which is followed by a subpage with
uncorrectable errors, the page read will return the wrong status of
correctable (as opposed to the actual status of uncorrectable.)

The bug is in function brcmnand_read_by_pio where there is a check for
uncorrectable bits which will be preempted if a previous status for
correctable bits is detected.

The fix is to stop checking for bad bits only if we already have a bad
bits status.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: david regan <dregan@mail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225eda-1643237024774@3c-app-mailcom-lxa02
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2062,7 +2062,7 @@ static int brcmnand_read_by_pio(struct m
 					mtd->oobsize / trans,
 					host->hwcfg.sector_size_1k);
 
-		if (!ret) {
+		if (ret != -EBADMSG) {
 			*err_addr = brcmnand_get_uncorrecc_addr(ctrl);
 
 			if (*err_addr)

[PATCH 5.10 087/121] Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 8bc69f86328e87a0ffa79438430cc82f3aa6a194 ]

kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：

   If this function returns an error, kobject_put() must be called to
   properly clean up the memory associated with the object.

Fix memory leak by calling kobject_put().

Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Juan Vazquez <juvazq@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220203173008.43480-1-linmq006@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/vmbus_drv.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index a5a402e776c77..362da2a83b470 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -1944,8 +1944,10 @@ int vmbus_add_channel_kobj(struct hv_device *dev, struct vmbus_channel *channel)
 	kobj->kset = dev->channels_kset;
 	ret = kobject_init_and_add(kobj, &vmbus_chan_ktype, NULL,
 				   "%u", relid);
-	if (ret)
+	if (ret) {
+		kobject_put(kobj);
 		return ret;
+	}
 
 	ret = sysfs_create_group(kobj, &vmbus_chan_group);
 
@@ -1954,6 +1956,7 @@ int vmbus_add_channel_kobj(struct hv_device *dev, struct vmbus_channel *channel)
 		 * The calling functions' error handling paths will cleanup the
 		 * empty channel directory.
 		 */
+		kobject_put(kobj);
 		dev_err(device, "Unable to set up channel sysfs files\n");
 		return ret;
 	}
-- 
2.34.1

[PATCH 5.10 088/121] KVM: x86/pmu: Refactoring find_arch_event() to pmc_perf_hw_id()

[Greg Kroah-Hartman]

From: Like Xu <likexu@tencent.com>

[ Upstream commit 7c174f305cbee6bdba5018aae02b84369e7ab995 ]

The find_arch_event() returns a "unsigned int" value,
which is used by the pmc_reprogram_counter() to
program a PERF_TYPE_HARDWARE type perf_event.

The returned value is actually the kernel defined generic
perf_hw_id, let's rename it to pmc_perf_hw_id() with simpler
incoming parameters for better self-explanation.

Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20211130074221.93635-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/pmu.c           | 8 +-------
 arch/x86/kvm/pmu.h           | 3 +--
 arch/x86/kvm/svm/pmu.c       | 8 ++++----
 arch/x86/kvm/vmx/pmu_intel.c | 9 +++++----
 4 files changed, 11 insertions(+), 17 deletions(-)

diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index 67741d2a03085..20092a56de8b0 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -171,7 +171,6 @@ static bool pmc_resume_counter(struct kvm_pmc *pmc)
 void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel)
 {
 	unsigned config, type = PERF_TYPE_RAW;
-	u8 event_select, unit_mask;
 	struct kvm *kvm = pmc->vcpu->kvm;
 	struct kvm_pmu_event_filter *filter;
 	int i;
@@ -203,17 +202,12 @@ void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel)
 	if (!allow_event)
 		return;
 
-	event_select = eventsel & ARCH_PERFMON_EVENTSEL_EVENT;
-	unit_mask = (eventsel & ARCH_PERFMON_EVENTSEL_UMASK) >> 8;
-
 	if (!(eventsel & (ARCH_PERFMON_EVENTSEL_EDGE |
 			  ARCH_PERFMON_EVENTSEL_INV |
 			  ARCH_PERFMON_EVENTSEL_CMASK |
 			  HSW_IN_TX |
 			  HSW_IN_TX_CHECKPOINTED))) {
-		config = kvm_x86_ops.pmu_ops->find_arch_event(pmc_to_pmu(pmc),
-						      event_select,
-						      unit_mask);
+		config = kvm_x86_ops.pmu_ops->pmc_perf_hw_id(pmc);
 		if (config != PERF_COUNT_HW_MAX)
 			type = PERF_TYPE_HARDWARE;
 	}
diff --git a/arch/x86/kvm/pmu.h b/arch/x86/kvm/pmu.h
index 067fef51760c4..1a44e29e73330 100644
--- a/arch/x86/kvm/pmu.h
+++ b/arch/x86/kvm/pmu.h
@@ -24,8 +24,7 @@ struct kvm_event_hw_type_mapping {
 };
 
 struct kvm_pmu_ops {
-	unsigned (*find_arch_event)(struct kvm_pmu *pmu, u8 event_select,
-				    u8 unit_mask);
+	unsigned int (*pmc_perf_hw_id)(struct kvm_pmc *pmc);
 	unsigned (*find_fixed_event)(int idx);
 	bool (*pmc_is_enabled)(struct kvm_pmc *pmc);
 	struct kvm_pmc *(*pmc_idx_to_pmc)(struct kvm_pmu *pmu, int pmc_idx);
diff --git a/arch/x86/kvm/svm/pmu.c b/arch/x86/kvm/svm/pmu.c
index 5a5c165a30ed1..4e7093bcb64b6 100644
--- a/arch/x86/kvm/svm/pmu.c
+++ b/arch/x86/kvm/svm/pmu.c
@@ -126,10 +126,10 @@ static inline struct kvm_pmc *get_gp_pmc_amd(struct kvm_pmu *pmu, u32 msr,
 	return &pmu->gp_counters[msr_to_index(msr)];
 }
 
-static unsigned amd_find_arch_event(struct kvm_pmu *pmu,
-				    u8 event_select,
-				    u8 unit_mask)
+static unsigned int amd_pmc_perf_hw_id(struct kvm_pmc *pmc)
 {
+	u8 event_select = pmc->eventsel & ARCH_PERFMON_EVENTSEL_EVENT;
+	u8 unit_mask = (pmc->eventsel & ARCH_PERFMON_EVENTSEL_UMASK) >> 8;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(amd_event_mapping); i++)
@@ -312,7 +312,7 @@ static void amd_pmu_reset(struct kvm_vcpu *vcpu)
 }
 
 struct kvm_pmu_ops amd_pmu_ops = {
-	.find_arch_event = amd_find_arch_event,
+	.pmc_perf_hw_id = amd_pmc_perf_hw_id,
 	.find_fixed_event = amd_find_fixed_event,
 	.pmc_is_enabled = amd_pmc_is_enabled,
 	.pmc_idx_to_pmc = amd_pmc_idx_to_pmc,
diff --git a/arch/x86/kvm/vmx/pmu_intel.c b/arch/x86/kvm/vmx/pmu_intel.c
index cdf5f34518f43..bd70c1d7f3458 100644
--- a/arch/x86/kvm/vmx/pmu_intel.c
+++ b/arch/x86/kvm/vmx/pmu_intel.c
@@ -68,10 +68,11 @@ static void global_ctrl_changed(struct kvm_pmu *pmu, u64 data)
 		reprogram_counter(pmu, bit);
 }
 
-static unsigned intel_find_arch_event(struct kvm_pmu *pmu,
-				      u8 event_select,
-				      u8 unit_mask)
+static unsigned int intel_pmc_perf_hw_id(struct kvm_pmc *pmc)
 {
+	struct kvm_pmu *pmu = pmc_to_pmu(pmc);
+	u8 event_select = pmc->eventsel & ARCH_PERFMON_EVENTSEL_EVENT;
+	u8 unit_mask = (pmc->eventsel & ARCH_PERFMON_EVENTSEL_UMASK) >> 8;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(intel_arch_events); i++)
@@ -432,7 +433,7 @@ static void intel_pmu_reset(struct kvm_vcpu *vcpu)
 }
 
 struct kvm_pmu_ops intel_pmu_ops = {
-	.find_arch_event = intel_find_arch_event,
+	.pmc_perf_hw_id = intel_pmc_perf_hw_id,
 	.find_fixed_event = intel_find_fixed_event,
 	.pmc_is_enabled = intel_pmc_is_enabled,
 	.pmc_idx_to_pmc = intel_pmc_idx_to_pmc,
-- 
2.34.1

[PATCH 5.10 089/121] KVM: x86/pmu: Dont truncate the PerfEvtSeln MSR when creating a perf event

[Greg Kroah-Hartman]

From: Jim Mattson <jmattson@google.com>

[ Upstream commit b8bfee85f1307426e0242d654f3a14c06ef639c5 ]

AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of
a PerfEvtSeln MSR. Don't drop the high nybble when setting up the
config field of a perf_event_attr structure for a call to
perf_event_create_kernel_counter().

Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220203014813.2130559-1-jmattson@google.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/pmu.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index 20092a56de8b0..2d91e39dbdf67 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -95,7 +95,7 @@ static void kvm_perf_overflow_intr(struct perf_event *perf_event,
 }
 
 static void pmc_reprogram_counter(struct kvm_pmc *pmc, u32 type,
-				  unsigned config, bool exclude_user,
+				  u64 config, bool exclude_user,
 				  bool exclude_kernel, bool intr,
 				  bool in_tx, bool in_tx_cp)
 {
@@ -170,7 +170,8 @@ static bool pmc_resume_counter(struct kvm_pmc *pmc)
 
 void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel)
 {
-	unsigned config, type = PERF_TYPE_RAW;
+	u64 config;
+	u32 type = PERF_TYPE_RAW;
 	struct kvm *kvm = pmc->vcpu->kvm;
 	struct kvm_pmu_event_filter *filter;
 	int i;
-- 
2.34.1

[PATCH 5.10 090/121] KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW

[Greg Kroah-Hartman]

From: Jim Mattson <jmattson@google.com>

[ Upstream commit 710c476514313c74045c41c0571bb5178fd16e3d ]

AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of
a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a
RAW perf event.

Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220203014813.2130559-2-jmattson@google.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index 2d91e39dbdf67..2f83b5d948b33 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -214,7 +214,7 @@ void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel)
 	}
 
 	if (type == PERF_TYPE_RAW)
-		config = eventsel & X86_RAW_EVENT_MASK;
+		config = eventsel & AMD64_RAW_EVENT_MASK;
 
 	if (pmc->current_config == eventsel && pmc_resume_counter(pmc))
 		return;
-- 
2.34.1

[PATCH 5.10 091/121] NFS: Dont set NFS_INO_INVALID_XATTR if there is no xattr cache

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 848fdd62399c638e65a1512616acaa5de7d5c5e8 ]

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/inode.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 21addb78523d2..6e7fd73a264af 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -195,6 +195,18 @@ bool nfs_check_cache_invalid(struct inode *inode, unsigned long flags)
 }
 EXPORT_SYMBOL_GPL(nfs_check_cache_invalid);
 
+#ifdef CONFIG_NFS_V4_2
+static bool nfs_has_xattr_cache(const struct nfs_inode *nfsi)
+{
+	return nfsi->xattr_cache != NULL;
+}
+#else
+static bool nfs_has_xattr_cache(const struct nfs_inode *nfsi)
+{
+	return false;
+}
+#endif
+
 static void nfs_set_cache_invalid(struct inode *inode, unsigned long flags)
 {
 	struct nfs_inode *nfsi = NFS_I(inode);
@@ -210,6 +222,8 @@ static void nfs_set_cache_invalid(struct inode *inode, unsigned long flags)
 	} else if (flags & NFS_INO_REVAL_PAGECACHE)
 		flags |= NFS_INO_INVALID_CHANGE | NFS_INO_INVALID_SIZE;
 
+	if (!nfs_has_xattr_cache(nfsi))
+		flags &= ~NFS_INO_INVALID_XATTR;
 	if (inode->i_mapping->nrpages == 0)
 		flags &= ~(NFS_INO_INVALID_DATA|NFS_INO_DATA_INVAL_DEFER);
 	nfsi->cache_validity |= flags;
-- 
2.34.1

[PATCH 5.10 092/121] ARM: OMAP2+: hwmod: Add of_node_put() before break

[Greg Kroah-Hartman]

From: Wan Jiabing <wanjiabing@vivo.com>

[ Upstream commit 80c469a0a03763f814715f3d12b6f3964c7423e8 ]

Fix following coccicheck warning:
./arch/arm/mach-omap2/omap_hwmod.c:753:1-23: WARNING: Function
for_each_matching_node should have of_node_put() before break

Early exits from for_each_matching_node should decrement the
node reference counter.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/omap_hwmod.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9443f129859b2..1fd67abca055b 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -749,8 +749,10 @@ static int __init _init_clkctrl_providers(void)
 
 	for_each_matching_node(np, ti_clkctrl_match_table) {
 		ret = _setup_clkctrl_provider(np);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			break;
+		}
 	}
 
 	return ret;
-- 
2.34.1

[PATCH 5.10 093/121] ARM: OMAP2+: adjust the location of put_device() call in omapdss_init_of

[Greg Kroah-Hartman]

From: Ye Guojin <ye.guojin@zte.com.cn>

[ Upstream commit 34596ba380b03d181e24efd50e2f21045bde3696 ]

This was found by coccicheck:
./arch/arm/mach-omap2/display.c, 272, 1-7, ERROR missing put_device;
call of_find_device_by_node on line 258, but without a corresponding
object release within this function.

Move the put_device() call before the if judgment.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 2000fca6bd4e6..6098666e928d0 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -263,9 +263,9 @@ static int __init omapdss_init_of(void)
 	}
 
 	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	put_device(&pdev->dev);
 	if (r) {
 		pr_err("Unable to populate DSS submodule devices\n");
-		put_device(&pdev->dev);
 		return r;
 	}
 
-- 
2.34.1

[PATCH 5.10 094/121] phy: usb: Leave some clocks running during suspend

[Greg Kroah-Hartman]

From: Al Cooper <alcooperx@gmail.com>

[ Upstream commit 42fed57046fc74586d7058bd51a1c10ac9c690cb ]

The PHY client driver does a phy_exit() call on suspend or rmmod and
the PHY driver needs to know the difference because some clocks need
to be kept running for suspend but can be shutdown on unbind/rmmod
(or if there are no PHY clients at all).

The fix is to use a PM notifier so the driver can tell if a PHY
client is calling exit() because of a system suspend or a driver
unbind/rmmod.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211201180653.35097-2-alcooperx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/broadcom/phy-brcm-usb.c | 38 +++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index 99fbc7e4138be..b901a0d4e2a80 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -17,6 +17,7 @@
 #include <linux/soc/brcmstb/brcmstb.h>
 #include <dt-bindings/phy/phy.h>
 #include <linux/mfd/syscon.h>
+#include <linux/suspend.h>
 
 #include "phy-brcm-usb-init.h"
 
@@ -69,12 +70,35 @@ struct brcm_usb_phy_data {
 	int			init_count;
 	int			wake_irq;
 	struct brcm_usb_phy	phys[BRCM_USB_PHY_ID_MAX];
+	struct notifier_block	pm_notifier;
+	bool			pm_active;
 };
 
 static s8 *node_reg_names[BRCM_REGS_MAX] = {
 	"crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
 };
 
+static int brcm_pm_notifier(struct notifier_block *notifier,
+			    unsigned long pm_event,
+			    void *unused)
+{
+	struct brcm_usb_phy_data *priv =
+		container_of(notifier, struct brcm_usb_phy_data, pm_notifier);
+
+	switch (pm_event) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		priv->pm_active = true;
+		break;
+	case PM_POST_RESTORE:
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		priv->pm_active = false;
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
 static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id)
 {
 	struct phy *gphy = dev_id;
@@ -90,6 +114,9 @@ static int brcm_usb_phy_init(struct phy *gphy)
 	struct brcm_usb_phy_data *priv =
 		container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
 
+	if (priv->pm_active)
+		return 0;
+
 	/*
 	 * Use a lock to make sure a second caller waits until
 	 * the base phy is inited before using it.
@@ -119,6 +146,9 @@ static int brcm_usb_phy_exit(struct phy *gphy)
 	struct brcm_usb_phy_data *priv =
 		container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
 
+	if (priv->pm_active)
+		return 0;
+
 	dev_dbg(&gphy->dev, "EXIT\n");
 	if (phy->id == BRCM_USB_PHY_2_0)
 		brcm_usb_uninit_eohci(&priv->ini);
@@ -484,6 +514,9 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
+	priv->pm_notifier.notifier_call = brcm_pm_notifier;
+	register_pm_notifier(&priv->pm_notifier);
+
 	mutex_init(&priv->mutex);
 
 	/* make sure invert settings are correct */
@@ -524,7 +557,10 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
 
 static int brcm_usb_phy_remove(struct platform_device *pdev)
 {
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(&pdev->dev);
+
 	sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group);
+	unregister_pm_notifier(&priv->pm_notifier);
 
 	return 0;
 }
@@ -535,6 +571,7 @@ static int brcm_usb_phy_suspend(struct device *dev)
 	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
 
 	if (priv->init_count) {
+		dev_dbg(dev, "SUSPEND\n");
 		priv->ini.wake_enabled = device_may_wakeup(dev);
 		if (priv->phys[BRCM_USB_PHY_3_0].inited)
 			brcm_usb_uninit_xhci(&priv->ini);
@@ -574,6 +611,7 @@ static int brcm_usb_phy_resume(struct device *dev)
 	 * Uninitialize anything that wasn't previously initialized.
 	 */
 	if (priv->init_count) {
+		dev_dbg(dev, "RESUME\n");
 		if (priv->wake_irq >= 0)
 			disable_irq_wake(priv->wake_irq);
 		brcm_usb_init_common(&priv->ini);
-- 
2.34.1

[PATCH 5.10 095/121] irqchip/sifive-plic: Add missing thead,c900-plic match string

[Greg Kroah-Hartman]

From: Guo Ren <guoren@linux.alibaba.com>

[ Upstream commit 1d4df649cbb4b26d19bea38ecff4b65b10a1bbca ]

The thead,c900-plic has been used in opensbi to distinguish
PLIC [1]. Although PLICs have the same behaviors in Linux,
they are different hardware with some custom initializing in
firmware(opensbi).

Qute opensbi patch commit-msg by Samuel:

  The T-HEAD PLIC implementation requires setting a delegation bit
  to allow access from S-mode. Now that the T-HEAD PLIC has its own
  compatible string, set this bit automatically from the PLIC driver,
  instead of reaching into the PLIC's MMIO space from another driver.

[1]: https://github.com/riscv-software-src/opensbi/commit/78c2b19218bd62653b9fb31623a42ced45f38ea6

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220130135634.1213301-3-guoren@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-sifive-plic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index 926e55d838cb1..bd99ee0ae433d 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -400,3 +400,4 @@ static int __init plic_init(struct device_node *node,
 
 IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
 IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
+IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_init); /* for firmware driver */
-- 
2.34.1

[PATCH 5.10 096/121] netfilter: conntrack: dont refresh sctp entries in closed state

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 77b337196a9d87f3d6bb9b07c0436ecafbffda1e ]

Vivek Thrivikraman reported:
 An SCTP server application which is accessed continuously by client
 application.
 When the session disconnects the client retries to establish a connection.
 After restart of SCTP server application the session is not established
 because of stale conntrack entry with connection state CLOSED as below.

 (removing this entry manually established new connection):

 sctp 9 CLOSED src=10.141.189.233 [..]  [ASSURED]

Just skip timeout update of closed entries, we don't want them to
stay around forever.

Reported-and-tested-by: Vivek Thrivikraman <vivek.thrivikraman@est.tech>
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1579
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_proto_sctp.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index 810cca24b3990..7626f3e1c70a7 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -489,6 +489,15 @@ int nf_conntrack_sctp_packet(struct nf_conn *ct,
 			pr_debug("Setting vtag %x for dir %d\n",
 				 ih->init_tag, !dir);
 			ct->proto.sctp.vtag[!dir] = ih->init_tag;
+
+			/* don't renew timeout on init retransmit so
+			 * port reuse by client or NAT middlebox cannot
+			 * keep entry alive indefinitely (incl. nat info).
+			 */
+			if (new_state == SCTP_CONNTRACK_CLOSED &&
+			    old_state == SCTP_CONNTRACK_CLOSED &&
+			    nf_ct_is_confirmed(ct))
+				ignore = true;
 		}
 
 		ct->proto.sctp.state = new_state;
-- 
2.34.1

[PATCH 5.10 097/121] arm64: dts: meson-gx: add ATF BL32 reserved-memory region

[Greg Kroah-Hartman]

From: Christian Hewitt <christianshewitt@gmail.com>

[ Upstream commit 76577c9137456febb05b0e17d244113196a98968 ]

Add an additional reserved memory region for the BL32 trusted firmware
present in many devices that boot from Amlogic vendor u-boot.

Suggested-by: Mateusz Krzak <kszaquitto@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-2-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 0edd137151f89..47cbb0a1eb183 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -43,6 +43,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
-- 
2.34.1

[PATCH 5.10 098/121] arm64: dts: meson-g12: add ATF BL32 reserved-memory region

[Greg Kroah-Hartman]

From: Christian Hewitt <christianshewitt@gmail.com>

[ Upstream commit 08982a1b3aa2611c9c711d24825c9002d28536f4 ]

Add an additional reserved memory region for the BL32 trusted firmware
present in many devices that boot from Amlogic vendor u-boot.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-3-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 7342c8a2b322d..075153a4d49fc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -101,6 +101,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
-- 
2.34.1

[PATCH 5.10 099/121] arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610

[Greg Kroah-Hartman]

From: Christian Hewitt <christianshewitt@gmail.com>

[ Upstream commit f26573e2bc9dfd551a0d5c6971f18cc546543312 ]

The BL32/TEE reserved-memory region is now inherited from the common
family dtsi (meson-g12-common) so we can drop it from board files.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 8 --------
 arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts  | 8 --------
 2 files changed, 16 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 4d5b3e514b514..71f91e31c1818 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -157,14 +157,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 5ab139a34c018..c21178e9c6064 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -203,14 +203,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
-- 
2.34.1

[PATCH 5.10 100/121] pidfd: fix test failure due to stack overflow on some arches

[Greg Kroah-Hartman]

From: Axel Rasmussen <axelrasmussen@google.com>

[ Upstream commit 4cbd93c3c110447adc66cb67c08af21f939ae2d7 ]

When running the pidfd_fdinfo_test on arm64, it fails for me. After some
digging, the reason is that the child exits due to SIGBUS, because it
overflows the 1024 byte stack we've reserved for it.

To fix the issue, increase the stack size to 8192 bytes (this number is
somewhat arbitrary, and was arrived at through experimentation -- I kept
doubling until the failure no longer occurred).

Also, let's make the issue easier to debug. wait_for_pid() returns an
ambiguous value: it may return -1 in all of these cases:

1. waitpid() itself returned -1
2. waitpid() returned success, but we found !WIFEXITED(status).
3. The child process exited, but it did so with a -1 exit code.

There's no way for the caller to tell the difference. So, at least log
which occurred, so the test runner can debug things.

While debugging this, I found that we had !WIFEXITED(), because the
child exited due to a signal. This seems like a reasonably common case,
so also print out whether or not we have WIFSIGNALED(), and the
associated WTERMSIG() (if any). This lets us see the SIGBUS I'm fixing
clearly when it occurs.

Finally, I'm suspicious of allocating the child's stack on our stack.
man clone(2) suggests that the correct way to do this is with mmap(),
and in particular by setting MAP_STACK. So, switch to doing it that way
instead.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/pidfd/pidfd.h         | 13 ++++++++---
 .../selftests/pidfd/pidfd_fdinfo_test.c       | 22 +++++++++++++++----
 2 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/tools/testing/selftests/pidfd/pidfd.h b/tools/testing/selftests/pidfd/pidfd.h
index 01f8d3c0cf2cb..6922d6417e1cf 100644
--- a/tools/testing/selftests/pidfd/pidfd.h
+++ b/tools/testing/selftests/pidfd/pidfd.h
@@ -68,7 +68,7 @@
 #define PIDFD_SKIP 3
 #define PIDFD_XFAIL 4
 
-int wait_for_pid(pid_t pid)
+static inline int wait_for_pid(pid_t pid)
 {
 	int status, ret;
 
@@ -78,13 +78,20 @@ int wait_for_pid(pid_t pid)
 		if (errno == EINTR)
 			goto again;
 
+		ksft_print_msg("waitpid returned -1, errno=%d\n", errno);
 		return -1;
 	}
 
-	if (!WIFEXITED(status))
+	if (!WIFEXITED(status)) {
+		ksft_print_msg(
+		       "waitpid !WIFEXITED, WIFSIGNALED=%d, WTERMSIG=%d\n",
+		       WIFSIGNALED(status), WTERMSIG(status));
 		return -1;
+	}
 
-	return WEXITSTATUS(status);
+	ret = WEXITSTATUS(status);
+	ksft_print_msg("waitpid WEXITSTATUS=%d\n", ret);
+	return ret;
 }
 
 static inline int sys_pidfd_open(pid_t pid, unsigned int flags)
diff --git a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c
index 22558524f71c3..3fd8e903118f5 100644
--- a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c
+++ b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c
@@ -12,6 +12,7 @@
 #include <string.h>
 #include <syscall.h>
 #include <sys/wait.h>
+#include <sys/mman.h>
 
 #include "pidfd.h"
 #include "../kselftest.h"
@@ -80,7 +81,10 @@ static inline int error_check(struct error *err, const char *test_name)
 	return err->code;
 }
 
+#define CHILD_STACK_SIZE 8192
+
 struct child {
+	char *stack;
 	pid_t pid;
 	int   fd;
 };
@@ -89,17 +93,22 @@ static struct child clone_newns(int (*fn)(void *), void *args,
 				struct error *err)
 {
 	static int flags = CLONE_PIDFD | CLONE_NEWPID | CLONE_NEWNS | SIGCHLD;
-	size_t stack_size = 1024;
-	char *stack[1024] = { 0 };
 	struct child ret;
 
 	if (!(flags & CLONE_NEWUSER) && geteuid() != 0)
 		flags |= CLONE_NEWUSER;
 
+	ret.stack = mmap(NULL, CHILD_STACK_SIZE, PROT_READ | PROT_WRITE,
+			 MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0);
+	if (ret.stack == MAP_FAILED) {
+		error_set(err, -1, "mmap of stack failed (errno %d)", errno);
+		return ret;
+	}
+
 #ifdef __ia64__
-	ret.pid = __clone2(fn, stack, stack_size, flags, args, &ret.fd);
+	ret.pid = __clone2(fn, ret.stack, CHILD_STACK_SIZE, flags, args, &ret.fd);
 #else
-	ret.pid = clone(fn, stack + stack_size, flags, args, &ret.fd);
+	ret.pid = clone(fn, ret.stack + CHILD_STACK_SIZE, flags, args, &ret.fd);
 #endif
 
 	if (ret.pid < 0) {
@@ -129,6 +138,11 @@ static inline int child_join(struct child *child, struct error *err)
 	else if (r > 0)
 		error_set(err, r, "child %d reported: %d", child->pid, r);
 
+	if (munmap(child->stack, CHILD_STACK_SIZE)) {
+		error_set(err, -1, "munmap of child stack failed (errno %d)", errno);
+		r = -1;
+	}
+
 	return r;
 }
 
-- 
2.34.1

[PATCH 5.10 101/121] selftests: fixup build warnings in pidfd / clone3 tests

[Greg Kroah-Hartman]

From: Axel Rasmussen <axelrasmussen@google.com>

[ Upstream commit e2aa5e650b07693477dff554053605976789fd68 ]

These are some trivial fixups, which were needed to build the tests with
clang and -Werror. The following issues are fixed:

- Remove various unused variables.
- In child_poll_leader_exit_test, clang isn't smart enough to realize
  syscall(SYS_exit, 0) won't return, so it complains we never return
  from a non-void function. Add an extra exit(0) to appease it.
- In test_pidfd_poll_leader_exit, ret may be branched on despite being
  uninitialized, if we have !use_waitpid. Initialize it to zero to get
  the right behavior in that case.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/clone3/clone3.c    | 2 --
 tools/testing/selftests/pidfd/pidfd_test.c | 6 +++---
 tools/testing/selftests/pidfd/pidfd_wait.c | 5 ++---
 3 files changed, 5 insertions(+), 8 deletions(-)

diff --git a/tools/testing/selftests/clone3/clone3.c b/tools/testing/selftests/clone3/clone3.c
index 076cf4325f783..cd4582129c7d6 100644
--- a/tools/testing/selftests/clone3/clone3.c
+++ b/tools/testing/selftests/clone3/clone3.c
@@ -126,8 +126,6 @@ static void test_clone3(uint64_t flags, size_t size, int expected,
 
 int main(int argc, char *argv[])
 {
-	pid_t pid;
-
 	uid_t uid = getuid();
 
 	ksft_print_header();
diff --git a/tools/testing/selftests/pidfd/pidfd_test.c b/tools/testing/selftests/pidfd/pidfd_test.c
index 529eb700ac26a..9a2d64901d591 100644
--- a/tools/testing/selftests/pidfd/pidfd_test.c
+++ b/tools/testing/selftests/pidfd/pidfd_test.c
@@ -441,7 +441,6 @@ static void test_pidfd_poll_exec(int use_waitpid)
 {
 	int pid, pidfd = 0;
 	int status, ret;
-	pthread_t t1;
 	time_t prog_start = time(NULL);
 	const char *test_name = "pidfd_poll check for premature notification on child thread exec";
 
@@ -500,13 +499,14 @@ static int child_poll_leader_exit_test(void *args)
 	 */
 	*child_exit_secs = time(NULL);
 	syscall(SYS_exit, 0);
+	/* Never reached, but appeases compiler thinking we should return. */
+	exit(0);
 }
 
 static void test_pidfd_poll_leader_exit(int use_waitpid)
 {
 	int pid, pidfd = 0;
-	int status, ret;
-	time_t prog_start = time(NULL);
+	int status, ret = 0;
 	const char *test_name = "pidfd_poll check for premature notification on non-empty"
 				"group leader exit";
 
diff --git a/tools/testing/selftests/pidfd/pidfd_wait.c b/tools/testing/selftests/pidfd/pidfd_wait.c
index be2943f072f60..17999e082aa71 100644
--- a/tools/testing/selftests/pidfd/pidfd_wait.c
+++ b/tools/testing/selftests/pidfd/pidfd_wait.c
@@ -39,7 +39,7 @@ static int sys_waitid(int which, pid_t pid, siginfo_t *info, int options,
 
 TEST(wait_simple)
 {
-	int pidfd = -1, status = 0;
+	int pidfd = -1;
 	pid_t parent_tid = -1;
 	struct clone_args args = {
 		.parent_tid = ptr_to_u64(&parent_tid),
@@ -47,7 +47,6 @@ TEST(wait_simple)
 		.flags = CLONE_PIDFD | CLONE_PARENT_SETTID,
 		.exit_signal = SIGCHLD,
 	};
-	int ret;
 	pid_t pid;
 	siginfo_t info = {
 		.si_signo = 0,
@@ -88,7 +87,7 @@ TEST(wait_simple)
 
 TEST(wait_states)
 {
-	int pidfd = -1, status = 0;
+	int pidfd = -1;
 	pid_t parent_tid = -1;
 	struct clone_args args = {
 		.parent_tid = ptr_to_u64(&parent_tid),
-- 
2.34.1

[PATCH 5.10 102/121] kconfig: let shell return enough output for deep path names

[Greg Kroah-Hartman]

From: Brenda Streiff <brenda.streiff@ni.com>

[ Upstream commit 8a4c5b2a6d8ea079fa36034e8167de87ab6f8880 ]

The 'shell' built-in only returns the first 256 bytes of the command's
output. In some cases, 'shell' is used to return a path; by bumping up
the buffer size to 4096 this lets us capture up to PATH_MAX.

The specific case where I ran into this was due to commit 1e860048c53e
("gcc-plugins: simplify GCC plugin-dev capability test"). After this
change, we now use `$(shell,$(CC) -print-file-name=plugin)` to return
a path; if the gcc path is particularly long, then the path ends up
truncated at the 256 byte mark, which makes the HAVE_GCC_PLUGINS
depends test always fail.

Signed-off-by: Brenda Streiff <brenda.streiff@ni.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/preprocess.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/kconfig/preprocess.c b/scripts/kconfig/preprocess.c
index 0590f86df6e40..748da578b418c 100644
--- a/scripts/kconfig/preprocess.c
+++ b/scripts/kconfig/preprocess.c
@@ -141,7 +141,7 @@ static char *do_lineno(int argc, char *argv[])
 static char *do_shell(int argc, char *argv[])
 {
 	FILE *p;
-	char buf[256];
+	char buf[4096];
 	char *cmd;
 	size_t nread;
 	int i;
-- 
2.34.1

[PATCH 5.10 103/121] ata: libata-core: Disable TRIM on M88V29

[Greg Kroah-Hartman]

From: Zoltán Böszörményi <zboszor@gmail.com>

[ Upstream commit c8ea23d5fa59f28302d4e3370c75d9c308e64410 ]

This device is a CF card, or possibly an SSD in CF form factor.
It supports NCQ and high speed DMA.

While it also advertises TRIM support, I/O errors are reported
when the discard mount option fstrim is used. TRIM also fails
when disabling NCQ and not just as an NCQ command.

TRIM must be disabled for this device.

Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 1f54f82d22d61..d2b544bdc7b5e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3989,6 +3989,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 
 	/* devices that don't properly handle TRIM commands */
 	{ "SuperSSpeed S238*",		NULL,	ATA_HORKAGE_NOTRIM, },
+	{ "M88V29*",			NULL,	ATA_HORKAGE_NOTRIM, },
 
 	/*
 	 * As defined, the DRAT (Deterministic Read After Trim) and RZAT
-- 
2.34.1

[PATCH 5.10 104/121] soc: aspeed: lpc-ctrl: Block error printing on probe defer cases

[Greg Kroah-Hartman]

From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

[ Upstream commit 301a5d3ad2432d7829f59432ca0a93a6defbb9a1 ]

Add a checking code when it gets -EPROBE_DEFER while getting a clock
resource. In this case, it doesn't need to print out an error message
because the probing will be re-visited.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20211104173709.222912-1-jae.hyun.yoo@intel.com
Link: https://lore.kernel.org/r/20220201070118.196372-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/aspeed/aspeed-lpc-ctrl.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/aspeed/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
index 040c7dc1d4792..71b555c715d2e 100644
--- a/drivers/soc/aspeed/aspeed-lpc-ctrl.c
+++ b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
@@ -251,10 +251,9 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
 	}
 
 	lpc_ctrl->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(lpc_ctrl->clk)) {
-		dev_err(dev, "couldn't get clock\n");
-		return PTR_ERR(lpc_ctrl->clk);
-	}
+	if (IS_ERR(lpc_ctrl->clk))
+		return dev_err_probe(dev, PTR_ERR(lpc_ctrl->clk),
+				     "couldn't get clock\n");
 	rc = clk_prepare_enable(lpc_ctrl->clk);
 	if (rc) {
 		dev_err(dev, "couldn't enable clock\n");
-- 
2.34.1

[PATCH 5.10 105/121] xprtrdma: fix pointer derefs in error cases of rpcrdma_ep_create

[Greg Kroah-Hartman]

From: Dan Aloni <dan.aloni@vastdata.com>

[ Upstream commit a9c10b5b3b67b3750a10c8b089b2e05f5e176e33 ]

If there are failures then we must not leave the non-NULL pointers with
the error value, otherwise `rpcrdma_ep_destroy` gets confused and tries
free them, resulting in an Oops.

Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtrdma/verbs.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 25554260a5931..dcc1992b14d76 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -449,6 +449,7 @@ static int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt)
 					      IB_POLL_WORKQUEUE);
 	if (IS_ERR(ep->re_attr.send_cq)) {
 		rc = PTR_ERR(ep->re_attr.send_cq);
+		ep->re_attr.send_cq = NULL;
 		goto out_destroy;
 	}
 
@@ -457,6 +458,7 @@ static int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt)
 					      IB_POLL_WORKQUEUE);
 	if (IS_ERR(ep->re_attr.recv_cq)) {
 		rc = PTR_ERR(ep->re_attr.recv_cq);
+		ep->re_attr.recv_cq = NULL;
 		goto out_destroy;
 	}
 	ep->re_receive_count = 0;
@@ -495,6 +497,7 @@ static int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt)
 	ep->re_pd = ib_alloc_pd(device, 0);
 	if (IS_ERR(ep->re_pd)) {
 		rc = PTR_ERR(ep->re_pd);
+		ep->re_pd = NULL;
 		goto out_destroy;
 	}
 
-- 
2.34.1

[PATCH 5.10 106/121] drm/rockchip: dw_hdmi: Do not leave clock enabled in error case

[Greg Kroah-Hartman]

From: Sascha Hauer <s.hauer@pengutronix.de>

[ Upstream commit c0cfbb122275da1b726481de5a8cffeb24e6322b ]

The driver returns an error when devm_phy_optional_get() fails leaving
the previously enabled clock turned on. Change order and enable the
clock only after the phy has been acquired.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126145549.617165-3-s.hauer@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 23de359a1dec6..515e6f187dc77 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -529,13 +529,6 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	ret = clk_prepare_enable(hdmi->vpll_clk);
-	if (ret) {
-		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
-			      ret);
-		return ret;
-	}
-
 	hdmi->phy = devm_phy_optional_get(dev, "hdmi");
 	if (IS_ERR(hdmi->phy)) {
 		ret = PTR_ERR(hdmi->phy);
@@ -544,6 +537,13 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	ret = clk_prepare_enable(hdmi->vpll_clk);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
+			      ret);
+		return ret;
+	}
+
 	drm_encoder_helper_add(encoder, &dw_hdmi_rockchip_encoder_helper_funcs);
 	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
-- 
2.34.1

[PATCH 5.10 107/121] tracing: Fix tp_printk option related with tp_printk_stop_on_boot

[Greg Kroah-Hartman]

From: JaeSang Yoo <js.yoo.5b@gmail.com>

[ Upstream commit 3203ce39ac0b2a57a84382ec184c7d4a0bede175 ]

The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is
the same as another kernel parameter "tp_printk". If "tp_printk" setup is
called before the "tp_printk_stop_on_boot", it will override the latter
and keep it from being set.

This is similar to other kernel parameter issues, such as:
  Commit 745a600cf1a6 ("um: console: Ignore console= option")
or init/do_mounts.c:45 (setup function of "ro" kernel param)

Fix it by checking for a "_" right after the "tp_printk" and if that
exists do not process the parameter.

Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com

Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com>
[ Fixed up change log and added space after if condition ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index a0729213f37be..f9fad789321b0 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -250,6 +250,10 @@ __setup("trace_clock=", set_trace_boot_clock);
 
 static int __init set_tracepoint_printk(char *str)
 {
+	/* Ignore the "tp_printk_stop_on_boot" param */
+	if (*str == '_')
+		return 0;
+
 	if ((strcmp(str, "=0") != 0 && strcmp(str, "=off") != 0))
 		tracepoint_printk = 1;
 	return 1;
-- 
2.34.1

[PATCH 5.10 108/121] net: usb: qmi_wwan: Add support for Dell DW5829e

[Greg Kroah-Hartman]

From: Slark Xiao <slark_xiao@163.com>

[ Upstream commit 8ecbb179286cbc91810c16caeb3396e06305cd0c ]

Dell DW5829e same as DW5821e except the CAT level.
DW5821e supports CAT16 but DW5829e supports CAT9.
Also, DW5829e includes normal and eSIM type.
Please see below test evidence:

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=81e6 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  7 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=81e4 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e-eSIM Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 6e033ba717030..597766d14563e 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1333,6 +1333,8 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x413c, 0x81d7, 0)},	/* Dell Wireless 5821e */
 	{QMI_FIXED_INTF(0x413c, 0x81d7, 1)},	/* Dell Wireless 5821e preproduction config */
 	{QMI_FIXED_INTF(0x413c, 0x81e0, 0)},	/* Dell Wireless 5821e with eSIM support*/
+	{QMI_FIXED_INTF(0x413c, 0x81e4, 0)},	/* Dell Wireless 5829e with eSIM support*/
+	{QMI_FIXED_INTF(0x413c, 0x81e6, 0)},	/* Dell Wireless 5829e */
 	{QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)},	/* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
 	{QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)},	/* HP lt4120 Snapdragon X5 LTE */
 	{QMI_FIXED_INTF(0x22de, 0x9061, 3)},	/* WeTelecom WPD-600N */
-- 
2.34.1

[PATCH 5.10 109/121] net: macb: Align the dma and coherent dma masks

[Greg Kroah-Hartman]

From: Marc St-Amand <mstamand@ciena.com>

[ Upstream commit 37f7860602b5b2d99fc7465f6407f403f5941988 ]

Single page and coherent memory blocks can use different DMA masks
when the macb accesses physical memory directly. The kernel is clever
enough to allocate pages that fit into the requested address width.

When using the ARM SMMU, the DMA mask must be the same for single
pages and big coherent memory blocks. Otherwise the translation
tables turn into one big mess.

  [   74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK
  [   74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1
  [   75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK
  [   75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1

Since using the same DMA mask does not hurt direct 1:1 physical
memory mappings, this commit always aligns DMA and coherent masks.

Signed-off-by: Marc St-Amand <mstamand@ciena.com>
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 1e8bf6b9834bb..2af464ac250ac 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -4534,7 +4534,7 @@ static int macb_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
 	if (GEM_BFEXT(DAW64, gem_readl(bp, DCFG6))) {
-		dma_set_mask(&pdev->dev, DMA_BIT_MASK(44));
+		dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(44));
 		bp->hw_dma_cap |= HW_DMA_CAP_64B;
 	}
 #endif
-- 
2.34.1

[PATCH 5.10 110/121] kconfig: fix failing to generate auto.conf

[Greg Kroah-Hartman]

From: Jing Leng <jleng@ambarella.com>

[ Upstream commit 1b9e740a81f91ae338b29ed70455719804957b80 ]

When the KCONFIG_AUTOCONFIG is specified (e.g. export \
KCONFIG_AUTOCONFIG=output/config/auto.conf), the directory of
include/config/ will not be created, so kconfig can't create deps
files in it and auto.conf can't be generated.

Signed-off-by: Jing Leng <jleng@ambarella.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/confdata.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index a39d93e3c6ae8..867b06c6d2797 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -968,14 +968,19 @@ static int conf_write_dep(const char *name)
 
 static int conf_touch_deps(void)
 {
-	const char *name;
+	const char *name, *tmp;
 	struct symbol *sym;
 	int res, i;
 
-	strcpy(depfile_path, "include/config/");
-	depfile_prefix_len = strlen(depfile_path);
-
 	name = conf_get_autoconfig_name();
+	tmp = strrchr(name, '/');
+	depfile_prefix_len = tmp ? tmp - name + 1 : 0;
+	if (depfile_prefix_len + 1 > sizeof(depfile_path))
+		return -1;
+
+	strncpy(depfile_path, name, depfile_prefix_len);
+	depfile_path[depfile_prefix_len] = 0;
+
 	conf_read_simple(name, S_DEF_AUTO);
 	sym_calc_value(modules_sym);
 
-- 
2.34.1

[PATCH 5.10 111/121] scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

commit 7f4c5a26f735dea4bbc0eb8eb9da99cda95a8563 upstream.

When connected point to point, the driver does not know the FC4's supported
by the other end. In Fabrics, it can query the nameserver.  Thus the driver
must send PRLIs for the FC4s it supports and enable support based on the
acc(ept) or rej(ect) of the respective FC4 PRLI.  Currently the driver
supports SCSI and NVMe PRLIs.

Unfortunately, although the behavior is per standard, many devices have
come to expect only SCSI PRLIs. In this particular example, the NVMe PRLI
is properly RJT'd but the target decided that it must LOGO after seeing the
unexpected NVMe PRLI. The LOGO causes the sequence to restart and login is
now in an infinite failure loop.

Fix the problem by having the driver, on a pt2pt link, remember NVMe PRLI
accept or reject status across logout as long as the link stays "up".  When
retrying login, if the prior NVMe PRLI was rejected, it will not be sent on
the next login.

Link: https://lore.kernel.org/r/20220212163120.15385-1-jsmart2021@gmail.com
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc.h           |    1 +
 drivers/scsi/lpfc/lpfc_attr.c      |    3 +++
 drivers/scsi/lpfc/lpfc_els.c       |   20 +++++++++++++++++++-
 drivers/scsi/lpfc/lpfc_nportdisc.c |    5 +++--
 4 files changed, 26 insertions(+), 3 deletions(-)

--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -374,6 +374,7 @@ struct lpfc_vport {
 #define FC_VPORT_LOGO_RCVD      0x200    /* LOGO received on vport */
 #define FC_RSCN_DISCOVERY       0x400	 /* Auth all devices after RSCN */
 #define FC_LOGO_RCVD_DID_CHNG   0x800    /* FDISC on phys port detect DID chng*/
+#define FC_PT2PT_NO_NVME        0x1000   /* Don't send NVME PRLI */
 #define FC_SCSI_SCAN_TMO        0x4000	 /* scsi scan timer running */
 #define FC_ABORT_DISCOVERY      0x8000	 /* we want to abort discovery */
 #define FC_NDISC_ACTIVE         0x10000	 /* NPort discovery active */
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1142,6 +1142,9 @@ lpfc_issue_lip(struct Scsi_Host *shost)
 	pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;
 	pmboxq->u.mb.mbxOwner = OWN_HOST;
 
+	if ((vport->fc_flag & FC_PT2PT) && (vport->fc_flag & FC_PT2PT_NO_NVME))
+		vport->fc_flag &= ~FC_PT2PT_NO_NVME;
+
 	mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);
 
 	if ((mbxstatus == MBX_SUCCESS) &&
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1067,7 +1067,8 @@ stop_rr_fcf_flogi:
 
 		/* FLOGI failed, so there is no fabric */
 		spin_lock_irq(shost->host_lock);
-		vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
+		vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP |
+				    FC_PT2PT_NO_NVME);
 		spin_unlock_irq(shost->host_lock);
 
 		/* If private loop, then allow max outstanding els to be
@@ -3945,6 +3946,23 @@ lpfc_els_retry(struct lpfc_hba *phba, st
 		/* Added for Vendor specifc support
 		 * Just keep retrying for these Rsn / Exp codes
 		 */
+		if ((vport->fc_flag & FC_PT2PT) &&
+		    cmd == ELS_CMD_NVMEPRLI) {
+			switch (stat.un.b.lsRjtRsnCode) {
+			case LSRJT_UNABLE_TPC:
+			case LSRJT_INVALID_CMD:
+			case LSRJT_LOGICAL_ERR:
+			case LSRJT_CMD_UNSUPPORTED:
+				lpfc_printf_vlog(vport, KERN_WARNING, LOG_ELS,
+						 "0168 NVME PRLI LS_RJT "
+						 "reason %x port doesn't "
+						 "support NVME, disabling NVME\n",
+						 stat.un.b.lsRjtRsnCode);
+				retry = 0;
+				vport->fc_flag |= FC_PT2PT_NO_NVME;
+				goto out_retry;
+			}
+		}
 		switch (stat.un.b.lsRjtRsnCode) {
 		case LSRJT_UNABLE_TPC:
 			/* The driver has a VALID PLOGI but the rport has
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -2010,8 +2010,9 @@ lpfc_cmpl_reglogin_reglogin_issue(struct
 			 * is configured try it.
 			 */
 			ndlp->nlp_fc4_type |= NLP_FC4_FCP;
-			if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
-			    (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) {
+			if ((!(vport->fc_flag & FC_PT2PT_NO_NVME)) &&
+			    (vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH ||
+			    vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) {
 				ndlp->nlp_fc4_type |= NLP_FC4_NVME;
 				/* We need to update the localport also */
 				lpfc_nvme_update_localport(vport);

[PATCH 5.10 112/121] EDAC: Fix calculation of returned address and next offset in edac_align_ptr()

[Greg Kroah-Hartman]

From: Eliav Farber <farbere@amazon.com>

commit f8efca92ae509c25e0a4bd5d0a86decea4f0c41e upstream.

Do alignment logic properly and use the "ptr" local variable for
calculating the remainder of the alignment.

This became an issue because struct edac_mc_layer has a size that is not
zero modulo eight, and the next offset that was prepared for the private
data was unaligned, causing an alignment exception.

The patch in Fixes: which broke this actually wanted to "what we
actually care about is the alignment of the actual pointer that's about
to be returned." But it didn't check that alignment.

Use the correct variable "ptr" for that.

  [ bp: Massage commit message. ]

Fixes: 8447c4d15e35 ("edac: Do alignment logic properly in edac_align_ptr()")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/edac_mc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -210,7 +210,7 @@ void *edac_align_ptr(void **p, unsigned
 	else
 		return (char *)ptr;
 
-	r = (unsigned long)p % align;
+	r = (unsigned long)ptr % align;
 
 	if (r == 0)
 		return (char *)ptr;

[PATCH 5.10 113/121] net: sched: limit TC_ACT_REPEAT loops

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 5740d068909676d4bdb5c9c00c37a83df7728909 upstream.

We have been living dangerously, at the mercy of malicious users,
abusing TC_ACT_REPEAT, as shown by this syzpot report [1].

Add an arbitrary limit (32) to the number of times an action can
return TC_ACT_REPEAT.

v2: switch the limit to 32 instead of 10.
    Use net_warn_ratelimited() instead of pr_err_once().

[1] (C repro available on demand)

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu:    1-...!: (10500 ticks this GP) idle=021/1/0x4000000000000000 softirq=5592/5592 fqs=0
        (t=10502 jiffies g=5305 q=190)
rcu: rcu_preempt kthread timer wakeup didn't happen for 10502 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu:    Possible timer handling issue on cpu=0 timer-softirq=3527
rcu: rcu_preempt kthread starved for 10505 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu:    Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt     state:I stack:29344 pid:   14 ppid:     2 flags:0x00004000
Call Trace:
 <TASK>
 context_switch kernel/sched/core.c:4986 [inline]
 __schedule+0xab2/0x4db0 kernel/sched/core.c:6295
 schedule+0xd2/0x260 kernel/sched/core.c:6368
 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881
 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1963
 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2136
 kthread+0x2e9/0x3a0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
 </TASK>
rcu: Stack dump where RCU GP kthread last ran:
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 3646 Comm: syz-executor358 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:rep_nop arch/x86/include/asm/vdso/processor.h:13 [inline]
RIP: 0010:cpu_relax arch/x86/include/asm/vdso/processor.h:18 [inline]
RIP: 0010:pv_wait_head_or_lock kernel/locking/qspinlock_paravirt.h:437 [inline]
RIP: 0010:__pv_queued_spin_lock_slowpath+0x3b8/0xb40 kernel/locking/qspinlock.c:508
Code: 48 89 eb c6 45 01 01 41 bc 00 80 00 00 48 c1 e9 03 83 e3 07 41 be 01 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 2c 01 eb 0c <f3> 90 41 83 ec 01 0f 84 72 04 00 00 41 0f b6 45 00 38 d8 7f 08 84
RSP: 0018:ffffc9000283f1b0 EFLAGS: 00000206
RAX: 0000000000000003 RBX: 0000000000000000 RCX: 1ffff1100fc0071e
RDX: 0000000000000001 RSI: 0000000000000201 RDI: 0000000000000000
RBP: ffff88807e0038f0 R08: 0000000000000001 R09: ffffffff8ffbf9ff
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000004c1e
R13: ffffed100fc0071e R14: 0000000000000001 R15: ffff8880b9c3aa80
FS:  00005555562bf300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffdbfef12b8 CR3: 00000000723c2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 pv_queued_spin_lock_slowpath arch/x86/include/asm/paravirt.h:591 [inline]
 queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:51 [inline]
 queued_spin_lock include/asm-generic/qspinlock.h:85 [inline]
 do_raw_spin_lock+0x200/0x2b0 kernel/locking/spinlock_debug.c:115
 spin_lock_bh include/linux/spinlock.h:354 [inline]
 sch_tree_lock include/net/sch_generic.h:610 [inline]
 sch_tree_lock include/net/sch_generic.h:605 [inline]
 prio_tune+0x3b9/0xb50 net/sched/sch_prio.c:211
 prio_init+0x5c/0x80 net/sched/sch_prio.c:244
 qdisc_create.constprop.0+0x44a/0x10f0 net/sched/sch_api.c:1253
 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660
 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5594
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7ee98aae99
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffdbfef12d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffdbfef1300 RCX: 00007f7ee98aae99
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d
R10: 000000000000000d R11: 0000000000000246 R12: 00007ffdbfef12f0
R13: 00000000000f4240 R14: 000000000004ca47 R15: 00007ffdbfef12e4
 </TASK>
INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.293 msecs
NMI backtrace for cpu 1
CPU: 1 PID: 3260 Comm: kworker/1:3 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: mld mld_ifc_work
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111
 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62
 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
 rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343
 print_cpu_stall kernel/rcu/tree_stall.h:604 [inline]
 check_cpu_stall kernel/rcu/tree_stall.h:688 [inline]
 rcu_pending kernel/rcu/tree.c:3919 [inline]
 rcu_sched_clock_irq.cold+0x5c/0x759 kernel/rcu/tree.c:2617
 update_process_times+0x16d/0x200 kernel/time/timer.c:1785
 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226
 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428
 __run_hrtimer kernel/time/hrtimer.c:1685 [inline]
 __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749
 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline]
 __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103
 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
RIP: 0010:__sanitizer_cov_trace_const_cmp4+0xc/0x70 kernel/kcov.c:286
Code: 00 00 00 48 89 7c 30 e8 48 89 4c 30 f0 4c 89 54 d8 20 48 89 10 5b c3 0f 1f 80 00 00 00 00 41 89 f8 bf 03 00 00 00 4c 8b 14 24 <89> f1 65 48 8b 34 25 00 70 02 00 e8 14 f9 ff ff 84 c0 74 4b 48 8b
RSP: 0018:ffffc90002c5eea8 EFLAGS: 00000246
RAX: 0000000000000007 RBX: ffff88801c625800 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: ffff8880137d3100 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff874fcd88 R11: 0000000000000000 R12: ffff88801d692dc0
R13: ffff8880137d3104 R14: 0000000000000000 R15: ffff88801d692de8
 tcf_police_act+0x358/0x11d0 net/sched/act_police.c:256
 tcf_action_exec net/sched/act_api.c:1049 [inline]
 tcf_action_exec+0x1a6/0x530 net/sched/act_api.c:1026
 tcf_exts_exec include/net/pkt_cls.h:326 [inline]
 route4_classify+0xef0/0x1400 net/sched/cls_route.c:179
 __tcf_classify net/sched/cls_api.c:1549 [inline]
 tcf_classify+0x3e8/0x9d0 net/sched/cls_api.c:1615
 prio_classify net/sched/sch_prio.c:42 [inline]
 prio_enqueue+0x3a7/0x790 net/sched/sch_prio.c:75
 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3668
 __dev_xmit_skb net/core/dev.c:3756 [inline]
 __dev_queue_xmit+0x1f61/0x3660 net/core/dev.c:4081
 neigh_hh_output include/net/neighbour.h:533 [inline]
 neigh_output include/net/neighbour.h:547 [inline]
 ip_finish_output2+0x14dc/0x2170 net/ipv4/ip_output.c:228
 __ip_finish_output net/ipv4/ip_output.c:306 [inline]
 __ip_finish_output+0x396/0x650 net/ipv4/ip_output.c:288
 ip_finish_output+0x32/0x200 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0x196/0x310 net/ipv4/ip_output.c:430
 dst_output include/net/dst.h:451 [inline]
 ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:126
 iptunnel_xmit+0x628/0xa50 net/ipv4/ip_tunnel_core.c:82
 geneve_xmit_skb drivers/net/geneve.c:966 [inline]
 geneve_xmit+0x10c8/0x3530 drivers/net/geneve.c:1077
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one net/core/dev.c:3473 [inline]
 dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3489
 __dev_queue_xmit+0x2985/0x3660 net/core/dev.c:4116
 neigh_hh_output include/net/neighbour.h:533 [inline]
 neigh_output include/net/neighbour.h:547 [inline]
 ip6_finish_output2+0xf7a/0x14f0 net/ipv6/ip6_output.c:126
 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
 __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170
 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224
 dst_output include/net/dst.h:451 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 mld_sendpack+0x9a3/0xe40 net/ipv6/mcast.c:1826
 mld_send_cr net/ipv6/mcast.c:2127 [inline]
 mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2659
 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
 worker_thread+0x657/0x1110 kernel/workqueue.c:2454
 kthread+0x2e9/0x3a0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
 </TASK>
----------------
Code disassembly (best guess):
   0:   48 89 eb                mov    %rbp,%rbx
   3:   c6 45 01 01             movb   $0x1,0x1(%rbp)
   7:   41 bc 00 80 00 00       mov    $0x8000,%r12d
   d:   48 c1 e9 03             shr    $0x3,%rcx
  11:   83 e3 07                and    $0x7,%ebx
  14:   41 be 01 00 00 00       mov    $0x1,%r14d
  1a:   48 b8 00 00 00 00 00    movabs $0xdffffc0000000000,%rax
  21:   fc ff df
  24:   4c 8d 2c 01             lea    (%rcx,%rax,1),%r13
  28:   eb 0c                   jmp    0x36
* 2a:   f3 90                   pause <-- trapping instruction
  2c:   41 83 ec 01             sub    $0x1,%r12d
  30:   0f 84 72 04 00 00       je     0x4a8
  36:   41 0f b6 45 00          movzbl 0x0(%r13),%eax
  3b:   38 d8                   cmp    %bl,%al
  3d:   7f 08                   jg     0x47
  3f:   84                      .byte 0x84

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220215235305.3272331-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/act_api.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -680,15 +680,24 @@ int tcf_action_exec(struct sk_buff *skb,
 restart_act_graph:
 	for (i = 0; i < nr_actions; i++) {
 		const struct tc_action *a = actions[i];
+		int repeat_ttl;
 
 		if (jmp_prgcnt > 0) {
 			jmp_prgcnt -= 1;
 			continue;
 		}
+
+		repeat_ttl = 32;
 repeat:
 		ret = a->ops->act(skb, a, res);
-		if (ret == TC_ACT_REPEAT)
-			goto repeat;	/* we need a ttl - JHS */
+
+		if (unlikely(ret == TC_ACT_REPEAT)) {
+			if (--repeat_ttl != 0)
+				goto repeat;
+			/* suspicious opcode, stop pipeline */
+			net_warn_ratelimited("TC_ACT_REPEAT abuse ?\n");
+			return TC_ACT_OK;
+		}
 
 		if (TC_ACT_EXT_CMP(ret, TC_ACT_JUMP)) {
 			jmp_prgcnt = ret & TCA_ACT_MAX_PRIO_MASK;

[PATCH 5.10 114/121] dmaengine: sh: rcar-dmac: Check for error num after setting mask

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

commit 2d21543efe332cd8c8f212fb7d365bc8b0690bfa upstream.

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.

Fixes: dc312349e875 ("dmaengine: rcar-dmac: Widen DMA mask to 40 bits")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220106030939.2644320-1-jiasheng@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/sh/rcar-dmac.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -1845,7 +1845,9 @@ static int rcar_dmac_probe(struct platfo
 	dmac->dev = &pdev->dev;
 	platform_set_drvdata(pdev, dmac);
 	dma_set_max_seg_size(dmac->dev, RCAR_DMATCR_MASK);
-	dma_set_mask_and_coherent(dmac->dev, DMA_BIT_MASK(40));
+	ret = dma_set_mask_and_coherent(dmac->dev, DMA_BIT_MASK(40));
+	if (ret)
+		return ret;
 
 	ret = rcar_dmac_parse_of(&pdev->dev, dmac);
 	if (ret < 0)

[PATCH 5.10 115/121] dmaengine: stm32-dmamux: Fix PM disable depth imbalance in stm32_dmamux_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

commit e831c7aba950f3ae94002b10321279654525e5ec upstream.

The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().

Fixes: 4f3ceca254e0 ("dmaengine: stm32-dmamux: Add PM Runtime support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20220108085336.11992-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/stm32-dmamux.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/dma/stm32-dmamux.c
+++ b/drivers/dma/stm32-dmamux.c
@@ -292,10 +292,12 @@ static int stm32_dmamux_probe(struct pla
 	ret = of_dma_router_register(node, stm32_dmamux_route_allocate,
 				     &stm32_dmamux->dmarouter);
 	if (ret)
-		goto err_clk;
+		goto pm_disable;
 
 	return 0;
 
+pm_disable:
+	pm_runtime_disable(&pdev->dev);
 err_clk:
 	clk_disable_unprepare(stm32_dmamux->clk);
 

[PATCH 5.10 116/121] dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_size

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

commit da2ad87fba0891576aadda9161b8505fde81a84d upstream.

As the possible failure of the dma_set_max_seg_size(), it should be
better to check the return value of the dma_set_max_seg_size().

Fixes: 97d49c59e219 ("dmaengine: rcar-dmac: set scatter/gather max segment size")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220111011239.452837-1-jiasheng@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/sh/rcar-dmac.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -1844,7 +1844,10 @@ static int rcar_dmac_probe(struct platfo
 
 	dmac->dev = &pdev->dev;
 	platform_set_drvdata(pdev, dmac);
-	dma_set_max_seg_size(dmac->dev, RCAR_DMATCR_MASK);
+	ret = dma_set_max_seg_size(dmac->dev, RCAR_DMATCR_MASK);
+	if (ret)
+		return ret;
+
 	ret = dma_set_mask_and_coherent(dmac->dev, DMA_BIT_MASK(40));
 	if (ret)
 		return ret;

[PATCH 5.10 117/121] i2c: qcom-cci: dont delete an unregistered adapter

[Greg Kroah-Hartman]

From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>

commit a0d48505a1d68e27220369e2dd1e3573a2f362d2 upstream.

If i2c_add_adapter() fails to add an I2C adapter found on QCOM CCI
controller, on error path i2c_del_adapter() is still called.

Fortunately there is a sanity check in the I2C core, so the only
visible implication is a printed debug level message:

    i2c-core: attempting to delete unregistered adapter [Qualcomm-CCI]

Nevertheless it would be reasonable to correct the probe error path.

Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-qcom-cci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-qcom-cci.c
+++ b/drivers/i2c/busses/i2c-qcom-cci.c
@@ -655,7 +655,7 @@ static int cci_probe(struct platform_dev
 	return 0;
 
 error_i2c:
-	for (; i >= 0; i--) {
+	for (--i ; i >= 0; i--) {
 		if (cci->master[i].cci)
 			i2c_del_adapter(&cci->master[i].adap);
 	}

[PATCH 5.10 118/121] i2c: qcom-cci: dont put a device tree node before i2c_add_adapter()

[Greg Kroah-Hartman]

From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>

commit 02a4a69667a2ad32f3b52ca906f19628fbdd8a01 upstream.

There is a minor chance for a race, if a pointer to an i2c-bus subnode
is stored and then reused after releasing its reference, and it would
be sufficient to get one more reference under a loop over children
subnodes.

Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-qcom-cci.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/i2c/busses/i2c-qcom-cci.c
+++ b/drivers/i2c/busses/i2c-qcom-cci.c
@@ -558,7 +558,7 @@ static int cci_probe(struct platform_dev
 		cci->master[idx].adap.quirks = &cci->data->quirks;
 		cci->master[idx].adap.algo = &cci_algo;
 		cci->master[idx].adap.dev.parent = dev;
-		cci->master[idx].adap.dev.of_node = child;
+		cci->master[idx].adap.dev.of_node = of_node_get(child);
 		cci->master[idx].master = idx;
 		cci->master[idx].cci = cci;
 
@@ -643,8 +643,10 @@ static int cci_probe(struct platform_dev
 			continue;
 
 		ret = i2c_add_adapter(&cci->master[i].adap);
-		if (ret < 0)
+		if (ret < 0) {
+			of_node_put(cci->master[i].adap.dev.of_node);
 			goto error_i2c;
+		}
 	}
 
 	pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
@@ -656,8 +658,10 @@ static int cci_probe(struct platform_dev
 
 error_i2c:
 	for (--i ; i >= 0; i--) {
-		if (cci->master[i].cci)
+		if (cci->master[i].cci) {
 			i2c_del_adapter(&cci->master[i].adap);
+			of_node_put(cci->master[i].adap.dev.of_node);
+		}
 	}
 error:
 	disable_irq(cci->irq);
@@ -673,8 +677,10 @@ static int cci_remove(struct platform_de
 	int i;
 
 	for (i = 0; i < cci->data->num_masters; i++) {
-		if (cci->master[i].cci)
+		if (cci->master[i].cci) {
 			i2c_del_adapter(&cci->master[i].adap);
+			of_node_put(cci->master[i].adap.dev.of_node);
+		}
 		cci_halt(cci, i);
 	}
 

[PATCH 5.10 119/121] copy_process(): Move fd_install() out of sighand->siglock critical section

[Greg Kroah-Hartman]

From: Waiman Long <longman@redhat.com>

commit ddc204b517e60ae64db34f9832dc41dafa77c751 upstream.

I was made aware of the following lockdep splat:

[ 2516.308763] =====================================================
[ 2516.309085] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
[ 2516.309433] 5.14.0-51.el9.aarch64+debug #1 Not tainted
[ 2516.309703] -----------------------------------------------------
[ 2516.310149] stress-ng/153663 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 2516.310512] ffff0000e422b198 (&newf->file_lock){+.+.}-{2:2}, at: fd_install+0x368/0x4f0
[ 2516.310944]
               and this task is already holding:
[ 2516.311248] ffff0000c08140d8 (&sighand->siglock){-.-.}-{2:2}, at: copy_process+0x1e2c/0x3e80
[ 2516.311804] which would create a new lock dependency:
[ 2516.312066]  (&sighand->siglock){-.-.}-{2:2} -> (&newf->file_lock){+.+.}-{2:2}
[ 2516.312446]
               but this new dependency connects a HARDIRQ-irq-safe lock:
[ 2516.312983]  (&sighand->siglock){-.-.}-{2:2}
   :
[ 2516.330700]  Possible interrupt unsafe locking scenario:

[ 2516.331075]        CPU0                    CPU1
[ 2516.331328]        ----                    ----
[ 2516.331580]   lock(&newf->file_lock);
[ 2516.331790]                                local_irq_disable();
[ 2516.332231]                                lock(&sighand->siglock);
[ 2516.332579]                                lock(&newf->file_lock);
[ 2516.332922]   <Interrupt>
[ 2516.333069]     lock(&sighand->siglock);
[ 2516.333291]
                *** DEADLOCK ***
[ 2516.389845]
               stack backtrace:
[ 2516.390101] CPU: 3 PID: 153663 Comm: stress-ng Kdump: loaded Not tainted 5.14.0-51.el9.aarch64+debug #1
[ 2516.390756] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 2516.391155] Call trace:
[ 2516.391302]  dump_backtrace+0x0/0x3e0
[ 2516.391518]  show_stack+0x24/0x30
[ 2516.391717]  dump_stack_lvl+0x9c/0xd8
[ 2516.391938]  dump_stack+0x1c/0x38
[ 2516.392247]  print_bad_irq_dependency+0x620/0x710
[ 2516.392525]  check_irq_usage+0x4fc/0x86c
[ 2516.392756]  check_prev_add+0x180/0x1d90
[ 2516.392988]  validate_chain+0x8e0/0xee0
[ 2516.393215]  __lock_acquire+0x97c/0x1e40
[ 2516.393449]  lock_acquire.part.0+0x240/0x570
[ 2516.393814]  lock_acquire+0x90/0xb4
[ 2516.394021]  _raw_spin_lock+0xe8/0x154
[ 2516.394244]  fd_install+0x368/0x4f0
[ 2516.394451]  copy_process+0x1f5c/0x3e80
[ 2516.394678]  kernel_clone+0x134/0x660
[ 2516.394895]  __do_sys_clone3+0x130/0x1f4
[ 2516.395128]  __arm64_sys_clone3+0x5c/0x7c
[ 2516.395478]  invoke_syscall.constprop.0+0x78/0x1f0
[ 2516.395762]  el0_svc_common.constprop.0+0x22c/0x2c4
[ 2516.396050]  do_el0_svc+0xb0/0x10c
[ 2516.396252]  el0_svc+0x24/0x34
[ 2516.396436]  el0t_64_sync_handler+0xa4/0x12c
[ 2516.396688]  el0t_64_sync+0x198/0x19c
[ 2517.491197] NET: Registered PF_ATMPVC protocol family
[ 2517.491524] NET: Registered PF_ATMSVC protocol family
[ 2591.991877] sched: RT throttling activated

One way to solve this problem is to move the fd_install() call out of
the sighand->siglock critical section.

Before commit 6fd2fe494b17 ("copy_process(): don't use ksys_close()
on cleanups"), the pidfd installation was done without holding both
the task_list lock and the sighand->siglock. Obviously, holding these
two locks are not really needed to protect the fd_install() call.
So move the fd_install() call down to after the releases of both locks.

Link: https://lore.kernel.org/r/20220208163912.1084752-1-longman@redhat.com
Fixes: 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups")
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/fork.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -2258,10 +2258,6 @@ static __latent_entropy struct task_stru
 		goto bad_fork_cancel_cgroup;
 	}
 
-	/* past the last point of failure */
-	if (pidfile)
-		fd_install(pidfd, pidfile);
-
 	init_task_pid_links(p);
 	if (likely(p->pid)) {
 		ptrace_init_task(p, (clone_flags & CLONE_PTRACE) || trace);
@@ -2310,6 +2306,9 @@ static __latent_entropy struct task_stru
 	syscall_tracepoint_update(p);
 	write_unlock_irq(&tasklist_lock);
 
+	if (pidfile)
+		fd_install(pidfd, pidfile);
+
 	proc_fork_connector(p);
 	sched_post_fork(p, args);
 	cgroup_post_fork(p, args);

[PATCH 5.10 120/121] i2c: brcmstb: fix support for DSL and CM variants

[Greg Kroah-Hartman]

From: Rafał Miłecki <rafal@milecki.pl>

commit 834cea3a252ed4847db076a769ad9efe06afe2d5 upstream.

DSL and CM (Cable Modem) support 8 B max transfer size and have a custom
DT binding for that reason. This driver was checking for a wrong
"compatible" however which resulted in an incorrect setup.

Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-brcmstb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -674,7 +674,7 @@ static int brcmstb_i2c_probe(struct plat
 
 	/* set the data in/out register size for compatible SoCs */
 	if (of_device_is_compatible(dev->device->of_node,
-				    "brcmstb,brcmper-i2c"))
+				    "brcm,brcmper-i2c"))
 		dev->data_regsz = sizeof(u8);
 	else
 		dev->data_regsz = sizeof(u32);

[PATCH 5.10 121/121] lockdep: Correct lock_classes index mapping

[Greg Kroah-Hartman]

From: Cheng Jui Wang <cheng-jui.wang@mediatek.com>

commit 28df029d53a2fd80c1b8674d47895648ad26dcfb upstream.

A kernel exception was hit when trying to dump /proc/lockdep_chains after
lockdep report "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!":

Unable to handle kernel paging request at virtual address 00054005450e05c3
...
00054005450e05c3] address between user and kernel address ranges
...
pc : [0xffffffece769b3a8] string+0x50/0x10c
lr : [0xffffffece769ac88] vsnprintf+0x468/0x69c
...
 Call trace:
  string+0x50/0x10c
  vsnprintf+0x468/0x69c
  seq_printf+0x8c/0xd8
  print_name+0x64/0xf4
  lc_show+0xb8/0x128
  seq_read_iter+0x3cc/0x5fc
  proc_reg_read_iter+0xdc/0x1d4

The cause of the problem is the function lock_chain_get_class() will
shift lock_classes index by 1, but the index don't need to be shifted
anymore since commit 01bb6f0af992 ("locking/lockdep: Change the range
of class_idx in held_lock struct") already change the index to start
from 0.

The lock_classes[-1] located at chain_hlocks array. When printing
lock_classes[-1] after the chain_hlocks entries are modified, the
exception happened.

The output of lockdep_chains are incorrect due to this problem too.

Fixes: f611e8cf98ec ("lockdep: Take read/write status in consideration when generate chainkey")
Signed-off-by: Cheng Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20220210105011.21712-1-cheng-jui.wang@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/locking/lockdep.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -3387,7 +3387,7 @@ struct lock_class *lock_chain_get_class(
 	u16 chain_hlock = chain_hlocks[chain->base + i];
 	unsigned int class_idx = chain_hlock_class_idx(chain_hlock);
 
-	return lock_classes + class_idx - 1;
+	return lock_classes + class_idx;
 }
 
 /*
@@ -3455,7 +3455,7 @@ static void print_chain_keys_chain(struc
 		hlock_id = chain_hlocks[chain->base + i];
 		chain_key = print_chain_key_iteration(hlock_id, chain_key);
 
-		print_lock_name(lock_classes + chain_hlock_class_idx(hlock_id) - 1);
+		print_lock_name(lock_classes + chain_hlock_class_idx(hlock_id));
 		printk("\n");
 	}
 }

Re: [PATCH 5.10 000/121] 5.10.102-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 664 bytes --]

Hi!

> This is the start of the stable review cycle for the 5.10.102 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 000/121] 5.10.102-rc1 review

[Guenter Roeck]

On Mon, Feb 21, 2022 at 09:48:12AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.102 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 161 pass: 161 fail: 0
Qemu test results:
	total: 477 pass: 477 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.10 000/121] 5.10.102-rc1 review

[Shuah Khan]

On 2/21/22 1:48 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.102 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.102-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.10 000/121] 5.10.102-rc1 review

[Samuel Zou]

On 2022/2/21 16:48, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.102 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.102-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.10.102-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.102-rc1
Commit: 1f48487c6f051818b603f32cb79d56ff72607b2f
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9013
passed: 9013
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9013
passed: 9013
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 5.10 000/121] 5.10.102-rc1 review

[Slade Watkins]

On Mon, Feb 21, 2022, at 3:48 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.102 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.

5.10.102-rc1 compiled and booted with no errors or regressions on my x86_64 test system.

Tested-by: Slade Watkins <slade@sladewatkins.com>

Cheers, 
Slade

Re: [PATCH 5.10 000/121] 5.10.102-rc1 review

[Florian Fainelli]

On 2/21/2022 12:48 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.102 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.102-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.10 000/121] 5.10.102-rc1 review

[Bagas Sanjaya]

On 21/02/22 15.48, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.102 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
  
Successfully cross-compiled for arm64 (bcm2711_defconfig, gcc 10.2.0) and
powerpc (ps3_defconfig, gcc 11.2.0).

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

Re: [PATCH 5.10 000/121] 5.10.102-rc1 review

[Naresh Kamboju]

On Mon, 21 Feb 2022 at 14:32, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.102 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.102-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

NOTE:
Build warning noticed on arm and arm64.
drivers/tee/optee/core.c: In function 'optee_probe':
drivers/tee/optee/core.c:726:20: warning: operation on 'rc' may be
undefined [-Wsequence-point]
  726 |                 rc = rc = PTR_ERR(ctx);
         |                 ~~~^~~~~~~~~~~~~~~~~~~

## Build
* kernel: 5.10.102-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.10.y
* git commit: 6c935cea31db8d0fa9dc4f765383345cc2ecafef
* git describe: v5.10.101-122-g6c935cea31db
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.101-122-g6c935cea31db

## Test Regressions (compared to v5.10.101)
No test regressions found.

## Metric Regressions (compared to v5.10.101)
* arm, build warnings
* arm64, build warnings

drivers/tee/optee/core.c: In function 'optee_probe':
drivers/tee/optee/core.c:726:20: warning: operation on 'rc' may be
undefined [-Wsequence-point]
  726 |                 rc = rc = PTR_ERR(ctx);
      |                 ~~~^~~~~~~~~~~~~~~~~~~


## Test Fixes (compared to v5.10.101)
No test fixes found.

## Metric Fixes (compared to v5.10.101)
No metric fixes found.

## Test result summary
total: 96836, pass: 83846, fail: 529, skip: 11518, xfail: 943

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 291 total, 291 passed, 0 failed
* arm64: 41 total, 39 passed, 2 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 40 total, 40 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 60 total, 46 passed, 14 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 41 total, 41 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.10 000/121] 5.10.102-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Feb 21, 2022 at 09:48:12AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.102 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20220213): 63 configs -> no failure
arm (gcc version 11.2.1 20220213): 105 configs -> no new failure
arm64 (gcc version 11.2.1 20220213): 3 configs -> no failure
x86_64 (gcc version 11.2.1 20220213): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]

[1]. https://openqa.qa.codethink.co.uk/tests/797
[2]. https://openqa.qa.codethink.co.uk/tests/799


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.10 000/121] 5.10.102-rc1 review

[Jon Hunter]

On Mon, 21 Feb 2022 09:48:12 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.102 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.102-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.10:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    75 tests:	75 pass, 0 fail

Linux version:	5.10.102-rc1-g6c935cea31db
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon