* [PATCH 0/3] staging: r8188eu: clean up rtw_rf.c @ 2022-02-20 15:48 Michael Straube 2022-02-20 15:48 ` [PATCH 1/3] staging: r8188eu: remove 5 GHz channels from ch_freq_map Michael Straube ` (2 more replies) 0 siblings, 3 replies; 15+ messages in thread From: Michael Straube @ 2022-02-20 15:48 UTC (permalink / raw) To: gregkh; +Cc: Larry.Finger, phil, linux-staging, linux-kernel, Michael Straube This set removes 5 GHz frequencies from the channel-frequency map in rtw_rf.c and simplifies the rtw_ch2freq() function. Tested on x86_64 with Inter-Tech DMG-02. Michael Straube (3): staging: r8188eu: remove 5 GHz channels from ch_freq_map staging: r8188eu: refactor rtw_ch2freq() staging: r8188eu: clean up rtw_rf.c drivers/staging/r8188eu/core/rtw_rf.c | 61 +++++++-------------------- 1 file changed, 16 insertions(+), 45 deletions(-) -- 2.35.1 ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/3] staging: r8188eu: remove 5 GHz channels from ch_freq_map 2022-02-20 15:48 [PATCH 0/3] staging: r8188eu: clean up rtw_rf.c Michael Straube @ 2022-02-20 15:48 ` Michael Straube 2022-02-21 17:13 ` Greg KH 2022-02-20 15:48 ` [PATCH 2/3] staging: r8188eu: refactor rtw_ch2freq() Michael Straube 2022-02-20 15:48 ` [PATCH 3/3] staging: r8188eu: clean up rtw_rf.c Michael Straube 2 siblings, 1 reply; 15+ messages in thread From: Michael Straube @ 2022-02-20 15:48 UTC (permalink / raw) To: gregkh; +Cc: Larry.Finger, phil, linux-staging, linux-kernel, Michael Straube This driver is for chips that operate only in the 2.4 GHz band. Frequencies for 5 GHz channels can be removed from the ch_freq_map array. Signed-off-by: Michael Straube <straube.linux@gmail.com> --- drivers/staging/r8188eu/core/rtw_rf.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/drivers/staging/r8188eu/core/rtw_rf.c b/drivers/staging/r8188eu/core/rtw_rf.c index e704092d31d0..51425971782b 100644 --- a/drivers/staging/r8188eu/core/rtw_rf.c +++ b/drivers/staging/r8188eu/core/rtw_rf.c @@ -17,22 +17,6 @@ static struct ch_freq ch_freq_map[] = { {1, 2412}, {2, 2417}, {3, 2422}, {4, 2427}, {5, 2432}, {6, 2437}, {7, 2442}, {8, 2447}, {9, 2452}, {10, 2457}, {11, 2462}, {12, 2467}, {13, 2472}, {14, 2484}, - /* UNII */ - {36, 5180}, {40, 5200}, {44, 5220}, {48, 5240}, {52, 5260}, - {56, 5280}, {60, 5300}, {64, 5320}, {149, 5745}, {153, 5765}, - {157, 5785}, {161, 5805}, {165, 5825}, {167, 5835}, {169, 5845}, - {171, 5855}, {173, 5865}, - /* HiperLAN2 */ - {100, 5500}, {104, 5520}, {108, 5540}, {112, 5560}, {116, 5580}, - {120, 5600}, {124, 5620}, {128, 5640}, {132, 5660}, {136, 5680}, - {140, 5700}, - /* Japan MMAC */ - {34, 5170}, {38, 5190}, {42, 5210}, {46, 5230}, - /* Japan */ - {184, 4920}, {188, 4940}, {192, 4960}, {196, 4980}, - {208, 5040},/* Japan, means J08 */ - {212, 5060},/* Japan, means J12 */ - {216, 5080},/* Japan, means J16 */ }; static int ch_freq_map_num = ARRAY_SIZE(ch_freq_map); -- 2.35.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 1/3] staging: r8188eu: remove 5 GHz channels from ch_freq_map 2022-02-20 15:48 ` [PATCH 1/3] staging: r8188eu: remove 5 GHz channels from ch_freq_map Michael Straube @ 2022-02-21 17:13 ` Greg KH 2022-02-21 19:07 ` Michael Straube 2022-02-21 19:41 ` Larry Finger 0 siblings, 2 replies; 15+ messages in thread From: Greg KH @ 2022-02-21 17:13 UTC (permalink / raw) To: Michael Straube; +Cc: Larry.Finger, phil, linux-staging, linux-kernel On Sun, Feb 20, 2022 at 04:48:45PM +0100, Michael Straube wrote: > This driver is for chips that operate only in the 2.4 GHz band. How do we know that? thanks, greg k-h ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/3] staging: r8188eu: remove 5 GHz channels from ch_freq_map 2022-02-21 17:13 ` Greg KH @ 2022-02-21 19:07 ` Michael Straube 2022-02-21 19:41 ` Larry Finger 1 sibling, 0 replies; 15+ messages in thread From: Michael Straube @ 2022-02-21 19:07 UTC (permalink / raw) To: Greg KH; +Cc: Larry.Finger, phil, linux-staging, linux-kernel On 2/21/22 18:13, Greg KH wrote: > On Sun, Feb 20, 2022 at 04:48:45PM +0100, Michael Straube wrote: >> This driver is for chips that operate only in the 2.4 GHz band. > > How do we know that? > The documentation that I've found for RTL8188EU and RTL8188ETV says that both are 2.4 Ghz only chips. Also the old rtl8188eu driver had a TODO item to remove code that is only valid for 5 GHz. So I thought this can be removed. Did I miss something? regards, Michael ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/3] staging: r8188eu: remove 5 GHz channels from ch_freq_map 2022-02-21 17:13 ` Greg KH 2022-02-21 19:07 ` Michael Straube @ 2022-02-21 19:41 ` Larry Finger 2022-02-25 8:57 ` Greg KH 1 sibling, 1 reply; 15+ messages in thread From: Larry Finger @ 2022-02-21 19:41 UTC (permalink / raw) To: Greg KH, Michael Straube; +Cc: phil, linux-staging, linux-kernel On 2/21/22 11:13, Greg KH wrote: > On Sun, Feb 20, 2022 at 04:48:45PM +0100, Michael Straube wrote: >> This driver is for chips that operate only in the 2.4 GHz band. > > How do we know that? > > thanks, Realtek (https://www.realtek.com/en/products/communications-network-ics/item/rtl8188eus) states the following: "The Realtek RTL8188EUS is an 802.11bgn 2.4G single-chip that integrates Wireless LAN (WLAN) and a network USB interface (USB 1.0/1.1/2.0 compatible) controller. It combines a WLAN MAC, a 1T1R capable WLAN baseband, and WLAN RF in a single chip. The RTL8188EUS provides a complete solution for high-throughput performance and low power consumption integrated wireless LAN devices." The reason there are 5G snippets in the driver is because Realtek uses the base code to generate drivers for other chip families such as RTL8192DU that have radios for both 2.4 and 5G bands. The RTL81288EU and variants have only a single radio. Larry ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/3] staging: r8188eu: remove 5 GHz channels from ch_freq_map 2022-02-21 19:41 ` Larry Finger @ 2022-02-25 8:57 ` Greg KH 0 siblings, 0 replies; 15+ messages in thread From: Greg KH @ 2022-02-25 8:57 UTC (permalink / raw) To: Larry Finger; +Cc: Michael Straube, phil, linux-staging, linux-kernel On Mon, Feb 21, 2022 at 01:41:22PM -0600, Larry Finger wrote: > On 2/21/22 11:13, Greg KH wrote: > > On Sun, Feb 20, 2022 at 04:48:45PM +0100, Michael Straube wrote: > > > This driver is for chips that operate only in the 2.4 GHz band. > > > > How do we know that? > > > > thanks, > Realtek (https://www.realtek.com/en/products/communications-network-ics/item/rtl8188eus) > states the following: > > "The Realtek RTL8188EUS is an 802.11bgn 2.4G single-chip that integrates > Wireless LAN (WLAN) and a network USB interface (USB 1.0/1.1/2.0 compatible) > controller. It combines a WLAN MAC, a 1T1R capable WLAN baseband, and WLAN > RF in a single chip. The RTL8188EUS provides a complete solution for > high-throughput performance and low power consumption integrated wireless > LAN devices." > > The reason there are 5G snippets in the driver is because Realtek uses the > base code to generate drivers for other chip families such as RTL8192DU that > have radios for both 2.4 and 5G bands. The RTL81288EU and variants have only > a single radio. Ah, ok, that's good to know. And should belong in the changelog text so that we are not confused :) thanks, greg k-h ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/3] staging: r8188eu: refactor rtw_ch2freq() 2022-02-20 15:48 [PATCH 0/3] staging: r8188eu: clean up rtw_rf.c Michael Straube 2022-02-20 15:48 ` [PATCH 1/3] staging: r8188eu: remove 5 GHz channels from ch_freq_map Michael Straube @ 2022-02-20 15:48 ` Michael Straube 2022-02-20 16:20 ` Pavel Skripkin 2022-02-20 15:48 ` [PATCH 3/3] staging: r8188eu: clean up rtw_rf.c Michael Straube 2 siblings, 1 reply; 15+ messages in thread From: Michael Straube @ 2022-02-20 15:48 UTC (permalink / raw) To: gregkh; +Cc: Larry.Finger, phil, linux-staging, linux-kernel, Michael Straube Since we have only channel values from 1 to 14 we can convert the array ch_freq_map to a simple integer array and use the indices as channel numbers. This simplifies the code and avoids looping through the array to get the frequency. Signed-off-by: Michael Straube <straube.linux@gmail.com> --- drivers/staging/r8188eu/core/rtw_rf.c | 40 +++++++++++---------------- 1 file changed, 16 insertions(+), 24 deletions(-) diff --git a/drivers/staging/r8188eu/core/rtw_rf.c b/drivers/staging/r8188eu/core/rtw_rf.c index 51425971782b..945a40e6511a 100644 --- a/drivers/staging/r8188eu/core/rtw_rf.c +++ b/drivers/staging/r8188eu/core/rtw_rf.c @@ -8,32 +8,24 @@ #include "../include/recv_osdep.h" #include "../include/xmit_osdep.h" -struct ch_freq { - u32 channel; - u32 frequency; +static const u32 ch_freq_map[] = { + 2412, + 2417, + 2422, + 2427, + 2432, + 2437, + 2442, + 2447, + 2452, + 2457, + 2462, + 2467, + 2472, + 2484 }; -static struct ch_freq ch_freq_map[] = { - {1, 2412}, {2, 2417}, {3, 2422}, {4, 2427}, {5, 2432}, - {6, 2437}, {7, 2442}, {8, 2447}, {9, 2452}, {10, 2457}, - {11, 2462}, {12, 2467}, {13, 2472}, {14, 2484}, -}; - -static int ch_freq_map_num = ARRAY_SIZE(ch_freq_map); - u32 rtw_ch2freq(u32 channel) { - u8 i; - u32 freq = 0; - - for (i = 0; i < ch_freq_map_num; i++) { - if (channel == ch_freq_map[i].channel) { - freq = ch_freq_map[i].frequency; - break; - } - } - if (i == ch_freq_map_num) - freq = 2412; - - return freq; + return ch_freq_map[channel - 1]; } -- 2.35.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 2/3] staging: r8188eu: refactor rtw_ch2freq() 2022-02-20 15:48 ` [PATCH 2/3] staging: r8188eu: refactor rtw_ch2freq() Michael Straube @ 2022-02-20 16:20 ` Pavel Skripkin 2022-02-20 16:30 ` Michael Straube 0 siblings, 1 reply; 15+ messages in thread From: Pavel Skripkin @ 2022-02-20 16:20 UTC (permalink / raw) To: Michael Straube, gregkh; +Cc: Larry.Finger, phil, linux-staging, linux-kernel Hi Michael, On 2/20/22 18:48, Michael Straube wrote: > -static int ch_freq_map_num = ARRAY_SIZE(ch_freq_map); > - > u32 rtw_ch2freq(u32 channel) > { > - u8 i; > - u32 freq = 0; > - > - for (i = 0; i < ch_freq_map_num; i++) { > - if (channel == ch_freq_map[i].channel) { > - freq = ch_freq_map[i].frequency; > - break; > - } > - } > - if (i == ch_freq_map_num) > - freq = 2412; > - > - return freq; > + return ch_freq_map[channel - 1]; > } What if channel has wrong value? The old code returned some default value, but with new one we will hit OOB. With regards, Pavel Skripkin ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/3] staging: r8188eu: refactor rtw_ch2freq() 2022-02-20 16:20 ` Pavel Skripkin @ 2022-02-20 16:30 ` Michael Straube 2022-02-21 12:22 ` Dan Carpenter 0 siblings, 1 reply; 15+ messages in thread From: Michael Straube @ 2022-02-20 16:30 UTC (permalink / raw) To: Pavel Skripkin, gregkh; +Cc: Larry.Finger, phil, linux-staging, linux-kernel On 2/20/22 17:20, Pavel Skripkin wrote: > Hi Michael, > > On 2/20/22 18:48, Michael Straube wrote: >> -static int ch_freq_map_num = ARRAY_SIZE(ch_freq_map); >> - >> u32 rtw_ch2freq(u32 channel) >> { >> - u8 i; >> - u32 freq = 0; >> - >> - for (i = 0; i < ch_freq_map_num; i++) { >> - if (channel == ch_freq_map[i].channel) { >> - freq = ch_freq_map[i].frequency; >> - break; >> - } >> - } >> - if (i == ch_freq_map_num) >> - freq = 2412; >> - >> - return freq; >> + return ch_freq_map[channel - 1]; >> } > > What if channel has wrong value? The old code returned some default > value, but with new one we will hit OOB. > Hi Pavel, thanks for reviewing. Yeah, I thought about adding a check for channel value between 1 and 14. But I did not add it because I think if this function will ever be called with channel < 1 or channel > 14, then the calling code must be wrong. Would be nice to see what others think about this. Thanks, Michael ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/3] staging: r8188eu: refactor rtw_ch2freq() 2022-02-20 16:30 ` Michael Straube @ 2022-02-21 12:22 ` Dan Carpenter 2022-02-21 19:20 ` Michael Straube 0 siblings, 1 reply; 15+ messages in thread From: Dan Carpenter @ 2022-02-21 12:22 UTC (permalink / raw) To: Michael Straube Cc: Pavel Skripkin, gregkh, Larry.Finger, phil, linux-staging, linux-kernel On Sun, Feb 20, 2022 at 05:30:08PM +0100, Michael Straube wrote: > On 2/20/22 17:20, Pavel Skripkin wrote: > > Hi Michael, > > > > On 2/20/22 18:48, Michael Straube wrote: > > > -static int ch_freq_map_num = ARRAY_SIZE(ch_freq_map); > > > - > > > u32 rtw_ch2freq(u32 channel) > > > { > > > - u8 i; > > > - u32 freq = 0; > > > - > > > - for (i = 0; i < ch_freq_map_num; i++) { > > > - if (channel == ch_freq_map[i].channel) { > > > - freq = ch_freq_map[i].frequency; > > > - break; > > > - } > > > - } > > > - if (i == ch_freq_map_num) > > > - freq = 2412; > > > - > > > - return freq; > > > + return ch_freq_map[channel - 1]; > > > } > > > > What if channel has wrong value? The old code returned some default > > value, but with new one we will hit OOB. > > > > Hi Pavel, > > thanks for reviewing. Yeah, I thought about adding a check for channel > value between 1 and 14. But I did not add it because I think if this > function will ever be called with channel < 1 or channel > 14, then the > calling code must be wrong. > > Would be nice to see what others think about this. I'm glad that Pavel noticed this change. This is a risky thing and should have been noted in the commit message. Just from a review stand point it would be best to leave the original behavior. I have audited this change and I do not think it is safe. It seems to me that one way this can be controlled is via module_param(rtw_channel, int, 0644); in drivers/staging/r8188eu/os_dep/os_intfs.c. I don't see any checking on that. regards, dan carpenter ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/3] staging: r8188eu: refactor rtw_ch2freq() 2022-02-21 12:22 ` Dan Carpenter @ 2022-02-21 19:20 ` Michael Straube 2022-02-21 20:54 ` Pavel Skripkin 2022-02-22 5:34 ` Dan Carpenter 0 siblings, 2 replies; 15+ messages in thread From: Michael Straube @ 2022-02-21 19:20 UTC (permalink / raw) To: Dan Carpenter Cc: Pavel Skripkin, gregkh, Larry.Finger, phil, linux-staging, linux-kernel On 2/21/22 13:22, Dan Carpenter wrote: > On Sun, Feb 20, 2022 at 05:30:08PM +0100, Michael Straube wrote: >> On 2/20/22 17:20, Pavel Skripkin wrote: >>> Hi Michael, >>> >>> On 2/20/22 18:48, Michael Straube wrote: >>>> -static int ch_freq_map_num = ARRAY_SIZE(ch_freq_map); >>>> - >>>> u32 rtw_ch2freq(u32 channel) >>>> { >>>> - u8 i; >>>> - u32 freq = 0; >>>> - >>>> - for (i = 0; i < ch_freq_map_num; i++) { >>>> - if (channel == ch_freq_map[i].channel) { >>>> - freq = ch_freq_map[i].frequency; >>>> - break; >>>> - } >>>> - } >>>> - if (i == ch_freq_map_num) >>>> - freq = 2412; >>>> - >>>> - return freq; >>>> + return ch_freq_map[channel - 1]; >>>> } >>> >>> What if channel has wrong value? The old code returned some default >>> value, but with new one we will hit OOB. >>> >> >> Hi Pavel, >> >> thanks for reviewing. Yeah, I thought about adding a check for channel >> value between 1 and 14. But I did not add it because I think if this >> function will ever be called with channel < 1 or channel > 14, then the >> calling code must be wrong. >> >> Would be nice to see what others think about this. > > I'm glad that Pavel noticed this change. This is a risky thing and > should have been noted in the commit message. > > Just from a review stand point it would be best to leave the original > behavior. > Do you mean to leave the whole original code including the 5 GHz frequencies? Or returning a default value if we have a channel value < 1 or > 14? I'm a bit confused now, because Greg asked how we know that the driver is only for 2.4 GHz chips. > I have audited this change and I do not think it is safe. It seems to > me that one way this can be controlled is via > module_param(rtw_channel, int, 0644); in > drivers/staging/r8188eu/os_dep/os_intfs.c. I don't see any checking on > that. > Thank you Dan! I missed that and blindly assumed the function will never be called with channel values OOB. That was not good, sorry. regards, Michael ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/3] staging: r8188eu: refactor rtw_ch2freq() 2022-02-21 19:20 ` Michael Straube @ 2022-02-21 20:54 ` Pavel Skripkin 2022-02-22 5:40 ` Dan Carpenter 2022-02-22 5:34 ` Dan Carpenter 1 sibling, 1 reply; 15+ messages in thread From: Pavel Skripkin @ 2022-02-21 20:54 UTC (permalink / raw) To: Michael Straube, Dan Carpenter Cc: gregkh, Larry.Finger, phil, linux-staging, linux-kernel Hi Michael, On 2/21/22 22:20, Michael Straube wrote: >> I'm glad that Pavel noticed this change. This is a risky thing and >> should have been noted in the commit message. >> >> Just from a review stand point it would be best to leave the original >> behavior. >> > > Do you mean to leave the whole original code including the 5 GHz > frequencies? Or returning a default value if we have a channel value < 1 > or > 14? > IMO, your version is much cleaner than previous one. This table walk seems really unreasonable, since 5 GHz support is really redundant (I saw it in other thread) I'd put just sanity check and return the default value from previous version. Maybe even wrapped with unlikely() if we sure, that in normal state we won't hit it ;) With regards, Pavel Skripkin ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/3] staging: r8188eu: refactor rtw_ch2freq() 2022-02-21 20:54 ` Pavel Skripkin @ 2022-02-22 5:40 ` Dan Carpenter 0 siblings, 0 replies; 15+ messages in thread From: Dan Carpenter @ 2022-02-22 5:40 UTC (permalink / raw) To: Pavel Skripkin Cc: Michael Straube, gregkh, Larry.Finger, phil, linux-staging, linux-kernel On Mon, Feb 21, 2022 at 11:54:50PM +0300, Pavel Skripkin wrote: > Hi Michael, > > On 2/21/22 22:20, Michael Straube wrote: > > > I'm glad that Pavel noticed this change. This is a risky thing and > > > should have been noted in the commit message. > > > > > > Just from a review stand point it would be best to leave the original > > > behavior. > > > > > > > Do you mean to leave the whole original code including the 5 GHz > > frequencies? Or returning a default value if we have a channel value < 1 > > or > 14? > > > > IMO, your version is much cleaner than previous one. This table walk seems > really unreasonable, since 5 GHz support is really redundant (I saw it in > other thread) > > I'd put just sanity check and return the default value from previous > version. Maybe even wrapped with unlikely() if we sure, that in normal state > we won't hit it ;) Adding likely()/unlikely() annotations hurt readability. Do not do that unless you have benchmark data to prove that it is worth it. (Hint: it is not worth it here). regards, dan carpenter ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/3] staging: r8188eu: refactor rtw_ch2freq() 2022-02-21 19:20 ` Michael Straube 2022-02-21 20:54 ` Pavel Skripkin @ 2022-02-22 5:34 ` Dan Carpenter 1 sibling, 0 replies; 15+ messages in thread From: Dan Carpenter @ 2022-02-22 5:34 UTC (permalink / raw) To: Michael Straube Cc: Pavel Skripkin, gregkh, Larry.Finger, phil, linux-staging, linux-kernel On Mon, Feb 21, 2022 at 08:20:14PM +0100, Michael Straube wrote: > On 2/21/22 13:22, Dan Carpenter wrote: > > On Sun, Feb 20, 2022 at 05:30:08PM +0100, Michael Straube wrote: > > > On 2/20/22 17:20, Pavel Skripkin wrote: > > Just from a review stand point it would be best to leave the original > > behavior. > > > > Do you mean to leave the whole original code including the 5 GHz > frequencies? Or returning a default value if we have a channel value < 1 > or > 14? I meant what Pavel said: if (channel == 0 || channel > ARRAY_SIZE(ch_freq_map)) return 2412; return ch_freq_map[channel - 1]; > > I'm a bit confused now, because Greg asked how we know that the driver > is only for 2.4 GHz chips. > Haven't you been deleting all the 5GHz code for some time now? Greg isn't saying you have to keep that if there is no reason. Just put the reason in the commit message and resend. regards, dan carpenter ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 3/3] staging: r8188eu: clean up rtw_rf.c 2022-02-20 15:48 [PATCH 0/3] staging: r8188eu: clean up rtw_rf.c Michael Straube 2022-02-20 15:48 ` [PATCH 1/3] staging: r8188eu: remove 5 GHz channels from ch_freq_map Michael Straube 2022-02-20 15:48 ` [PATCH 2/3] staging: r8188eu: refactor rtw_ch2freq() Michael Straube @ 2022-02-20 15:48 ` Michael Straube 2 siblings, 0 replies; 15+ messages in thread From: Michael Straube @ 2022-02-20 15:48 UTC (permalink / raw) To: gregkh; +Cc: Larry.Finger, phil, linux-staging, linux-kernel, Michael Straube Remove unnecessary includes and the unused define _RTW_RF_C_ from rtw_rf.c. Signed-off-by: Michael Straube <straube.linux@gmail.com> --- drivers/staging/r8188eu/core/rtw_rf.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/staging/r8188eu/core/rtw_rf.c b/drivers/staging/r8188eu/core/rtw_rf.c index 945a40e6511a..ac1c06a60735 100644 --- a/drivers/staging/r8188eu/core/rtw_rf.c +++ b/drivers/staging/r8188eu/core/rtw_rf.c @@ -1,12 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright(c) 2007 - 2011 Realtek Corporation. */ -#define _RTW_RF_C_ - -#include "../include/osdep_service.h" #include "../include/drv_types.h" -#include "../include/recv_osdep.h" -#include "../include/xmit_osdep.h" static const u32 ch_freq_map[] = { 2412, -- 2.35.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
end of thread, other threads:[~2022-02-25 8:57 UTC | newest] Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-02-20 15:48 [PATCH 0/3] staging: r8188eu: clean up rtw_rf.c Michael Straube 2022-02-20 15:48 ` [PATCH 1/3] staging: r8188eu: remove 5 GHz channels from ch_freq_map Michael Straube 2022-02-21 17:13 ` Greg KH 2022-02-21 19:07 ` Michael Straube 2022-02-21 19:41 ` Larry Finger 2022-02-25 8:57 ` Greg KH 2022-02-20 15:48 ` [PATCH 2/3] staging: r8188eu: refactor rtw_ch2freq() Michael Straube 2022-02-20 16:20 ` Pavel Skripkin 2022-02-20 16:30 ` Michael Straube 2022-02-21 12:22 ` Dan Carpenter 2022-02-21 19:20 ` Michael Straube 2022-02-21 20:54 ` Pavel Skripkin 2022-02-22 5:40 ` Dan Carpenter 2022-02-22 5:34 ` Dan Carpenter 2022-02-20 15:48 ` [PATCH 3/3] staging: r8188eu: clean up rtw_rf.c Michael Straube
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.