From: Ilkka Koskinen <ilkka@os.amperecomputing.com> To: lorenzo.pieralisi@arm.com, guohanjun@huawei.com, sudeep.holla@arm.com, rafael@kernel.org, linux@armlinux.org.uk Cc: lenb@kernel.org, robert.moore@intel.com, james.morse@arm.com, linux-acpi@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, patches@amperecomputing.com, scott@os.amperecomputing.com, darren@os.amperecomputing.com Subject: [PATCH v6 0/2] ACPI: Arm Generic Diagnostic Dump and Reset device Date: Tue, 8 Mar 2022 18:07:48 -0800 [thread overview] Message-ID: <20220309020750.65399-1-ilkka@os.amperecomputing.com> (raw) Arm Generic Diagnostic Dump and Reset device enables a maintainer to request OS to perform a diagnostic dump and reset a system via SDEI event or an interrupt. This patchset adds support for the SDEI path. I do have a patch to enable the interrupt path as well but I'm holding it back since AGDI table is missing interrupt configuration fields (trigger type etc.). The recently published specification is available at https://developer.arm.com/documentation/den0093/latest The patchset was tested on Ampere Altra/Mt. Jade. The patchset applies on top of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm bleeding-edge (dd54258fbf6c) Requires commit 27e932a31496 ("ACPI: APEI: rename ghes_init() with an "acpi_" prefix") From v1: * Moved pdata to the stack and dropped unnecessary kzalloc() in agdi_init() * Changed the ACPICA patch upstreaming order comment in the paragraph above From v2: * The first patch was split. The most of it was merged to ACPICA project at first and later ported to linux-acpi (fd919e37cb15914c6fe13e13d530a4f732407c6d). The rest are in the first patch. From v3: Fixed: * Moved header files in alphabetical order and removed unnecessary ones From v4: * Platform device/driver stuff removed * acpi_agdi_init() call moved from device_initcall to acpi_init() * Slightly modified Kconfig text to keep checkpatch happy From v5: * Brought back platform device/driver * Fixed remove() function Ilkka Koskinen (2): ACPI: tables: Add AGDI to the list of known table signatures ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device drivers/acpi/arm64/Kconfig | 10 ++++ drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/agdi.c | 116 ++++++++++++++++++++++++++++++++++++ drivers/acpi/bus.c | 2 + drivers/acpi/tables.c | 2 +- include/linux/acpi_agdi.h | 13 ++++ 6 files changed, 143 insertions(+), 1 deletion(-) create mode 100644 drivers/acpi/arm64/agdi.c create mode 100644 include/linux/acpi_agdi.h -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Ilkka Koskinen <ilkka@os.amperecomputing.com> To: lorenzo.pieralisi@arm.com, guohanjun@huawei.com, sudeep.holla@arm.com, rafael@kernel.org, linux@armlinux.org.uk Cc: lenb@kernel.org, robert.moore@intel.com, james.morse@arm.com, linux-acpi@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, patches@amperecomputing.com, scott@os.amperecomputing.com, darren@os.amperecomputing.com Subject: [PATCH v6 0/2] ACPI: Arm Generic Diagnostic Dump and Reset device Date: Tue, 8 Mar 2022 18:07:48 -0800 [thread overview] Message-ID: <20220309020750.65399-1-ilkka@os.amperecomputing.com> (raw) Arm Generic Diagnostic Dump and Reset device enables a maintainer to request OS to perform a diagnostic dump and reset a system via SDEI event or an interrupt. This patchset adds support for the SDEI path. I do have a patch to enable the interrupt path as well but I'm holding it back since AGDI table is missing interrupt configuration fields (trigger type etc.). The recently published specification is available at https://developer.arm.com/documentation/den0093/latest The patchset was tested on Ampere Altra/Mt. Jade. The patchset applies on top of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm bleeding-edge (dd54258fbf6c) Requires commit 27e932a31496 ("ACPI: APEI: rename ghes_init() with an "acpi_" prefix") From v1: * Moved pdata to the stack and dropped unnecessary kzalloc() in agdi_init() * Changed the ACPICA patch upstreaming order comment in the paragraph above From v2: * The first patch was split. The most of it was merged to ACPICA project at first and later ported to linux-acpi (fd919e37cb15914c6fe13e13d530a4f732407c6d). The rest are in the first patch. From v3: Fixed: * Moved header files in alphabetical order and removed unnecessary ones From v4: * Platform device/driver stuff removed * acpi_agdi_init() call moved from device_initcall to acpi_init() * Slightly modified Kconfig text to keep checkpatch happy From v5: * Brought back platform device/driver * Fixed remove() function Ilkka Koskinen (2): ACPI: tables: Add AGDI to the list of known table signatures ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device drivers/acpi/arm64/Kconfig | 10 ++++ drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/agdi.c | 116 ++++++++++++++++++++++++++++++++++++ drivers/acpi/bus.c | 2 + drivers/acpi/tables.c | 2 +- include/linux/acpi_agdi.h | 13 ++++ 6 files changed, 143 insertions(+), 1 deletion(-) create mode 100644 drivers/acpi/arm64/agdi.c create mode 100644 include/linux/acpi_agdi.h -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-03-09 2:08 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-03-09 2:07 Ilkka Koskinen [this message] 2022-03-09 2:07 ` [PATCH v6 0/2] ACPI: Arm Generic Diagnostic Dump and Reset device Ilkka Koskinen 2022-03-09 2:07 ` [PATCH v6 1/2] ACPI: tables: Add AGDI to the list of known table signatures Ilkka Koskinen 2022-03-09 2:07 ` Ilkka Koskinen 2022-03-09 18:45 ` Rafael J. Wysocki 2022-03-09 18:45 ` Rafael J. Wysocki 2022-03-09 20:41 ` Ilkka Koskinen 2022-03-09 20:41 ` Ilkka Koskinen 2022-03-10 9:14 ` Lorenzo Pieralisi 2022-03-10 9:14 ` Lorenzo Pieralisi 2022-03-09 2:07 ` [PATCH v6 2/2] ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device Ilkka Koskinen 2022-03-09 2:07 ` Ilkka Koskinen 2022-03-10 9:11 ` Lorenzo Pieralisi 2022-03-10 9:11 ` Lorenzo Pieralisi 2022-03-10 19:19 ` Rafael J. Wysocki 2022-03-10 19:19 ` Rafael J. Wysocki
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220309020750.65399-1-ilkka@os.amperecomputing.com \ --to=ilkka@os.amperecomputing.com \ --cc=darren@os.amperecomputing.com \ --cc=guohanjun@huawei.com \ --cc=james.morse@arm.com \ --cc=lenb@kernel.org \ --cc=linux-acpi@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=lorenzo.pieralisi@arm.com \ --cc=patches@amperecomputing.com \ --cc=rafael@kernel.org \ --cc=robert.moore@intel.com \ --cc=scott@os.amperecomputing.com \ --cc=sudeep.holla@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.