* [PATCH v6 00/15] vDPA shadow virtqueue
@ 2022-03-14 17:34 Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 01/15] vhost: Add VhostShadowVirtqueue Eugenio Pérez
` (14 more replies)
0 siblings, 15 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
This series enable shadow virtqueue (SVQ) for vhost-vdpa devices. This
is intended as a new method of tracking the memory the devices touch
during a migration process: Instead of relay on vhost device's dirty
logging capability, SVQ intercepts the VQ dataplane forwarding the
descriptors between VM and device. This way qemu is the effective
writer of guests memory, like in qemu's virtio device operation.
When SVQ is enabled qemu offers a new virtual address space to the
device to read and write into, and it maps new vrings and the guest
memory in it. SVQ also intercepts kicks and calls between the device
and the guest. Used buffers relay would cause dirty memory being
tracked.
This effectively means that vDPA device passthrough is intercepted by
qemu. While SVQ should only be enabled at migration time, the switching
from regular mode to SVQ mode is left for a future series.
It is based on the ideas of DPDK SW assisted LM, in the series of
DPDK's https://patchwork.dpdk.org/cover/48370/ . However, these does
not map the shadow vq in guest's VA, but in qemu's.
For qemu to use shadow virtqueues the guest virtio driver must not use
features like event_idx.
SVQ needs to be enabled with cmdline:
-netdev type=vhost-vdpa,vhostdev=vhost-vdpa-0,id=vhost-vdpa0,svq=on
The first three patches enables notifications forwarding with
assistance of qemu. It's easy to enable only this if the relevant
cmdline part of the last patch is applied on top of these.
Next four patches implement the actual buffer forwarding. However,
address are not translated from HVA so they will need a host device with
an iommu allowing them to access all of the HVA range.
The last part of the series uses properly the host iommu, so qemu
creates a new iova address space in the device's range and translates
the buffers in it. Finally, it adds the cmdline parameter.
Some simple performance tests with netperf were done. They used a nested
guest with vp_vdpa, vhost-kernel at L0 host. Starting with no svq and a
baseline average of ~9009.96Mbps:
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 30.01 9061.03
131072 16384 16384 30.01 8962.94
131072 16384 16384 30.01 9005.92
To enable SVQ buffers forwarding reduce throughput to an average of
~7730.7mbps:
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 30.01 7689.72
131072 16384 16384 30.00 7752.07
131072 16384 16384 30.01 7750.30
However, many performance improvements were left out of this series for
simplicity, so difference should shrink in the future.
Comments are welcome.
TODO on future series:
* Event, indirect, packed, and others features of virtio.
* To support different set of features between the device<->SVQ and the
SVQ<->guest communication.
* Support of device host notifier memory regions.
* To sepparate buffers forwarding in its own AIO context, so we can
throw more threads to that task and we don't need to stop the main
event loop.
* Support multiqueue virtio-net vdpa.
* Proper documentation.
Changes from v5:
* Add proper casting on 32 bits compilations.
* Fix merge conflict adding qemu_memalign header
Changes from v4:
* Iterate iova->hva tree instead on maintain own tree so we support HVA
overlaps.
* Fix: Errno completion at failure.
* Rename x-svq to svq, so changes to stable does not affect cmdline parameter.
Changes from v3:
* Add @unstable feature to NetdevVhostVDPAOptions.x-svq.
* Fix uncomplete mapping (by 1 byte) of memory regions if svq is enabled.
v3 link:
https://lore.kernel.org/qemu-devel/20220302203012.3476835-1-eperezma@redhat.com/
Changes from v2:
* Less assertions and more error handling in iova tree code.
* Better documentation, both fixing errors and making @param: format
* Homogeneize SVQ avail_idx_shadow and shadow_used_idx to make shadow a
prefix at both times.
* Fix: Fo not use VirtQueueElement->len field, track separatedly.
* Split vhost_svq_{enable,disable}_notification, so the code looks more
like the kernel driver code.
* Small improvements.
v2 link:
https://lore.kernel.org/all/CAJaqyWfXHE0C54R_-OiwJzjC0gPpkE3eX0L8BeeZXGm1ERYPtA@mail.gmail.com/
Changes from v1:
* Feature set at device->SVQ is now the same as SVQ->guest.
* Size of SVQ is not max available device size anymore, but guest's
negotiated.
* Add VHOST_FILE_UNBIND kick and call fd treatment.
* Make SVQ a public struct
* Come back to previous approach to iova-tree
* Some assertions are now fail paths. Some errors are now log_guest.
* Only mask _F_LOG feature at vdpa_set_features svq enable path.
* Refactor some errors and messages. Add missing error unwindings.
* Add memory barrier at _F_NO_NOTIFY set.
* Stop checking for features flags out of transport range.
v1 link:
https://lore.kernel.org/virtualization/7d86c715-6d71-8a27-91f5-8d47b71e3201@redhat.com/
Changes from v4 RFC:
* Support of allocating / freeing iova ranges in IOVA tree. Extending
already present iova-tree for that.
* Proper validation of guest features. Now SVQ can negotiate a
different set of features with the device when enabled.
* Support of host notifiers memory regions
* Handling of SVQ full queue in case guest's descriptors span to
different memory regions (qemu's VA chunks).
* Flush pending used buffers at end of SVQ operation.
* QMP command now looks by NetClientState name. Other devices will need
to implement it's way to enable vdpa.
* Rename QMP command to set, so it looks more like a way of working
* Better use of qemu error system
* Make a few assertions proper error-handling paths.
* Add more documentation
* Less coupling of virtio / vhost, that could cause friction on changes
* Addressed many other small comments and small fixes.
Changes from v3 RFC:
* Move everything to vhost-vdpa backend. A big change, this allowed
some cleanup but more code has been added in other places.
* More use of glib utilities, especially to manage memory.
v3 link:
https://lists.nongnu.org/archive/html/qemu-devel/2021-05/msg06032.html
Changes from v2 RFC:
* Adding vhost-vdpa devices support
* Fixed some memory leaks pointed by different comments
v2 link:
https://lists.nongnu.org/archive/html/qemu-devel/2021-03/msg05600.html
Changes from v1 RFC:
* Use QMP instead of migration to start SVQ mode.
* Only accepting IOMMU devices, closer behavior with target devices
(vDPA)
* Fix invalid masking/unmasking of vhost call fd.
* Use of proper methods for synchronization.
* No need to modify VirtIO device code, all of the changes are
contained in vhost code.
* Delete superfluous code.
* An intermediate RFC was sent with only the notifications forwarding
changes. It can be seen in
https://patchew.org/QEMU/20210129205415.876290-1-eperezma@redhat.com/
v1 link:
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg05372.html
Eugenio Pérez (20):
virtio: Add VIRTIO_F_QUEUE_STATE
virtio-net: Honor VIRTIO_CONFIG_S_DEVICE_STOPPED
virtio: Add virtio_queue_is_host_notifier_enabled
vhost: Make vhost_virtqueue_{start,stop} public
vhost: Add x-vhost-enable-shadow-vq qmp
vhost: Add VhostShadowVirtqueue
vdpa: Register vdpa devices in a list
vhost: Route guest->host notification through shadow virtqueue
Add vhost_svq_get_svq_call_notifier
Add vhost_svq_set_guest_call_notifier
vdpa: Save call_fd in vhost-vdpa
vhost-vdpa: Take into account SVQ in vhost_vdpa_set_vring_call
vhost: Route host->guest notification through shadow virtqueue
virtio: Add vhost_shadow_vq_get_vring_addr
vdpa: Save host and guest features
vhost: Add vhost_svq_valid_device_features to shadow vq
vhost: Shadow virtqueue buffers forwarding
vhost: Add VhostIOVATree
vhost: Use a tree to store memory mappings
vdpa: Add custom IOTLB translations to SVQ
Eugenio Pérez (15):
vhost: Add VhostShadowVirtqueue
vhost: Add Shadow VirtQueue kick forwarding capabilities
vhost: Add Shadow VirtQueue call forwarding capabilities
vhost: Add vhost_svq_valid_features to shadow vq
virtio: Add vhost_svq_get_vring_addr
vdpa: adapt vhost_ops callbacks to svq
vhost: Shadow virtqueue buffers forwarding
util: Add iova_tree_alloc_map
util: add iova_tree_find_iova
vhost: Add VhostIOVATree
vdpa: Add custom IOTLB translations to SVQ
vdpa: Adapt vhost_vdpa_get_vring_base to SVQ
vdpa: Never set log_base addr if SVQ is enabled
vdpa: Expose VHOST_F_LOG_ALL on SVQ
vdpa: Add x-svq to NetdevVhostVDPAOptions
qapi/net.json | 8 +-
hw/virtio/vhost-iova-tree.h | 27 ++
hw/virtio/vhost-shadow-virtqueue.h | 87 ++++
include/hw/virtio/vhost-vdpa.h | 8 +
include/qemu/iova-tree.h | 38 +-
hw/virtio/vhost-iova-tree.c | 110 +++++
hw/virtio/vhost-shadow-virtqueue.c | 636 +++++++++++++++++++++++++++++
hw/virtio/vhost-vdpa.c | 522 ++++++++++++++++++++++-
net/vhost-vdpa.c | 48 ++-
util/iova-tree.c | 170 ++++++++
hw/virtio/meson.build | 2 +-
11 files changed, 1630 insertions(+), 26 deletions(-)
create mode 100644 hw/virtio/vhost-iova-tree.h
create mode 100644 hw/virtio/vhost-shadow-virtqueue.h
create mode 100644 hw/virtio/vhost-iova-tree.c
create mode 100644 hw/virtio/vhost-shadow-virtqueue.c
--
2.27.0
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v6 01/15] vhost: Add VhostShadowVirtqueue
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 02/15] vhost: Add Shadow VirtQueue kick forwarding capabilities Eugenio Pérez
` (13 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
Vhost shadow virtqueue (SVQ) is an intermediate jump for virtqueue
notifications and buffers, allowing qemu to track them. While qemu is
forwarding the buffers and virtqueue changes, it is able to commit the
memory it's being dirtied, the same way regular qemu's VirtIO devices
do.
This commit only exposes basic SVQ allocation and free. Next patches of
the series add functionality like notifications and buffers forwarding.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
hw/virtio/vhost-shadow-virtqueue.h | 28 ++++++++++++++
hw/virtio/vhost-shadow-virtqueue.c | 62 ++++++++++++++++++++++++++++++
hw/virtio/meson.build | 2 +-
3 files changed, 91 insertions(+), 1 deletion(-)
create mode 100644 hw/virtio/vhost-shadow-virtqueue.h
create mode 100644 hw/virtio/vhost-shadow-virtqueue.c
diff --git a/hw/virtio/vhost-shadow-virtqueue.h b/hw/virtio/vhost-shadow-virtqueue.h
new file mode 100644
index 0000000000..f1519e3c7b
--- /dev/null
+++ b/hw/virtio/vhost-shadow-virtqueue.h
@@ -0,0 +1,28 @@
+/*
+ * vhost shadow virtqueue
+ *
+ * SPDX-FileCopyrightText: Red Hat, Inc. 2021
+ * SPDX-FileContributor: Author: Eugenio Pérez <eperezma@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef VHOST_SHADOW_VIRTQUEUE_H
+#define VHOST_SHADOW_VIRTQUEUE_H
+
+#include "qemu/event_notifier.h"
+
+/* Shadow virtqueue to relay notifications */
+typedef struct VhostShadowVirtqueue {
+ /* Shadow kick notifier, sent to vhost */
+ EventNotifier hdev_kick;
+ /* Shadow call notifier, sent to vhost */
+ EventNotifier hdev_call;
+} VhostShadowVirtqueue;
+
+VhostShadowVirtqueue *vhost_svq_new(void);
+
+void vhost_svq_free(gpointer vq);
+G_DEFINE_AUTOPTR_CLEANUP_FUNC(VhostShadowVirtqueue, vhost_svq_free);
+
+#endif
diff --git a/hw/virtio/vhost-shadow-virtqueue.c b/hw/virtio/vhost-shadow-virtqueue.c
new file mode 100644
index 0000000000..c1db02c53e
--- /dev/null
+++ b/hw/virtio/vhost-shadow-virtqueue.c
@@ -0,0 +1,62 @@
+/*
+ * vhost shadow virtqueue
+ *
+ * SPDX-FileCopyrightText: Red Hat, Inc. 2021
+ * SPDX-FileContributor: Author: Eugenio Pérez <eperezma@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "hw/virtio/vhost-shadow-virtqueue.h"
+
+#include "qemu/error-report.h"
+
+/**
+ * Creates vhost shadow virtqueue, and instructs the vhost device to use the
+ * shadow methods and file descriptors.
+ *
+ * Returns the new virtqueue or NULL.
+ *
+ * In case of error, reason is reported through error_report.
+ */
+VhostShadowVirtqueue *vhost_svq_new(void)
+{
+ g_autofree VhostShadowVirtqueue *svq = g_new0(VhostShadowVirtqueue, 1);
+ int r;
+
+ r = event_notifier_init(&svq->hdev_kick, 0);
+ if (r != 0) {
+ error_report("Couldn't create kick event notifier: %s (%d)",
+ g_strerror(errno), errno);
+ goto err_init_hdev_kick;
+ }
+
+ r = event_notifier_init(&svq->hdev_call, 0);
+ if (r != 0) {
+ error_report("Couldn't create call event notifier: %s (%d)",
+ g_strerror(errno), errno);
+ goto err_init_hdev_call;
+ }
+
+ return g_steal_pointer(&svq);
+
+err_init_hdev_call:
+ event_notifier_cleanup(&svq->hdev_kick);
+
+err_init_hdev_kick:
+ return NULL;
+}
+
+/**
+ * Free the resources of the shadow virtqueue.
+ *
+ * @pvq: gpointer to SVQ so it can be used by autofree functions.
+ */
+void vhost_svq_free(gpointer pvq)
+{
+ VhostShadowVirtqueue *vq = pvq;
+ event_notifier_cleanup(&vq->hdev_kick);
+ event_notifier_cleanup(&vq->hdev_call);
+ g_free(vq);
+}
diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
index 521f7d64a8..2dc87613bc 100644
--- a/hw/virtio/meson.build
+++ b/hw/virtio/meson.build
@@ -11,7 +11,7 @@ softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('vhost-stub.c'))
virtio_ss = ss.source_set()
virtio_ss.add(files('virtio.c'))
-virtio_ss.add(when: 'CONFIG_VHOST', if_true: files('vhost.c', 'vhost-backend.c'))
+virtio_ss.add(when: 'CONFIG_VHOST', if_true: files('vhost.c', 'vhost-backend.c', 'vhost-shadow-virtqueue.c'))
virtio_ss.add(when: 'CONFIG_VHOST_USER', if_true: files('vhost-user.c'))
virtio_ss.add(when: 'CONFIG_VHOST_VDPA', if_true: files('vhost-vdpa.c'))
virtio_ss.add(when: 'CONFIG_VIRTIO_BALLOON', if_true: files('virtio-balloon.c'))
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 02/15] vhost: Add Shadow VirtQueue kick forwarding capabilities
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 01/15] vhost: Add VhostShadowVirtqueue Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 03/15] vhost: Add Shadow VirtQueue call " Eugenio Pérez
` (12 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
At this mode no buffer forwarding will be performed in SVQ mode: Qemu
will just forward the guest's kicks to the device.
Host memory notifiers regions are left out for simplicity, and they will
not be addressed in this series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
hw/virtio/vhost-shadow-virtqueue.h | 14 +++
include/hw/virtio/vhost-vdpa.h | 4 +
hw/virtio/vhost-shadow-virtqueue.c | 55 +++++++++++
hw/virtio/vhost-vdpa.c | 144 ++++++++++++++++++++++++++++-
4 files changed, 215 insertions(+), 2 deletions(-)
diff --git a/hw/virtio/vhost-shadow-virtqueue.h b/hw/virtio/vhost-shadow-virtqueue.h
index f1519e3c7b..1cbc87d5d8 100644
--- a/hw/virtio/vhost-shadow-virtqueue.h
+++ b/hw/virtio/vhost-shadow-virtqueue.h
@@ -18,8 +18,22 @@ typedef struct VhostShadowVirtqueue {
EventNotifier hdev_kick;
/* Shadow call notifier, sent to vhost */
EventNotifier hdev_call;
+
+ /*
+ * Borrowed virtqueue's guest to host notifier. To borrow it in this event
+ * notifier allows to recover the VhostShadowVirtqueue from the event loop
+ * easily. If we use the VirtQueue's one, we don't have an easy way to
+ * retrieve VhostShadowVirtqueue.
+ *
+ * So shadow virtqueue must not clean it, or we would lose VirtQueue one.
+ */
+ EventNotifier svq_kick;
} VhostShadowVirtqueue;
+void vhost_svq_set_svq_kick_fd(VhostShadowVirtqueue *svq, int svq_kick_fd);
+
+void vhost_svq_stop(VhostShadowVirtqueue *svq);
+
VhostShadowVirtqueue *vhost_svq_new(void);
void vhost_svq_free(gpointer vq);
diff --git a/include/hw/virtio/vhost-vdpa.h b/include/hw/virtio/vhost-vdpa.h
index 3ce79a646d..009a9f3b6b 100644
--- a/include/hw/virtio/vhost-vdpa.h
+++ b/include/hw/virtio/vhost-vdpa.h
@@ -12,6 +12,8 @@
#ifndef HW_VIRTIO_VHOST_VDPA_H
#define HW_VIRTIO_VHOST_VDPA_H
+#include <gmodule.h>
+
#include "hw/virtio/virtio.h"
#include "standard-headers/linux/vhost_types.h"
@@ -27,6 +29,8 @@ typedef struct vhost_vdpa {
bool iotlb_batch_begin_sent;
MemoryListener listener;
struct vhost_vdpa_iova_range iova_range;
+ bool shadow_vqs_enabled;
+ GPtrArray *shadow_vqs;
struct vhost_dev *dev;
VhostVDPAHostNotifier notifier[VIRTIO_QUEUE_MAX];
} VhostVDPA;
diff --git a/hw/virtio/vhost-shadow-virtqueue.c b/hw/virtio/vhost-shadow-virtqueue.c
index c1db02c53e..e5da907b8e 100644
--- a/hw/virtio/vhost-shadow-virtqueue.c
+++ b/hw/virtio/vhost-shadow-virtqueue.c
@@ -11,6 +11,59 @@
#include "hw/virtio/vhost-shadow-virtqueue.h"
#include "qemu/error-report.h"
+#include "qemu/main-loop.h"
+#include "linux-headers/linux/vhost.h"
+
+/**
+ * Forward guest notifications.
+ *
+ * @n: guest kick event notifier, the one that guest set to notify svq.
+ */
+static void vhost_handle_guest_kick(EventNotifier *n)
+{
+ VhostShadowVirtqueue *svq = container_of(n, VhostShadowVirtqueue, svq_kick);
+ event_notifier_test_and_clear(n);
+ event_notifier_set(&svq->hdev_kick);
+}
+
+/**
+ * Set a new file descriptor for the guest to kick the SVQ and notify for avail
+ *
+ * @svq: The svq
+ * @svq_kick_fd: The svq kick fd
+ *
+ * Note that the SVQ will never close the old file descriptor.
+ */
+void vhost_svq_set_svq_kick_fd(VhostShadowVirtqueue *svq, int svq_kick_fd)
+{
+ EventNotifier *svq_kick = &svq->svq_kick;
+ bool poll_stop = VHOST_FILE_UNBIND != event_notifier_get_fd(svq_kick);
+ bool poll_start = svq_kick_fd != VHOST_FILE_UNBIND;
+
+ if (poll_stop) {
+ event_notifier_set_handler(svq_kick, NULL);
+ }
+
+ /*
+ * event_notifier_set_handler already checks for guest's notifications if
+ * they arrive at the new file descriptor in the switch, so there is no
+ * need to explicitly check for them.
+ */
+ if (poll_start) {
+ event_notifier_init_fd(svq_kick, svq_kick_fd);
+ event_notifier_set(svq_kick);
+ event_notifier_set_handler(svq_kick, vhost_handle_guest_kick);
+ }
+}
+
+/**
+ * Stop the shadow virtqueue operation.
+ * @svq: Shadow Virtqueue
+ */
+void vhost_svq_stop(VhostShadowVirtqueue *svq)
+{
+ event_notifier_set_handler(&svq->svq_kick, NULL);
+}
/**
* Creates vhost shadow virtqueue, and instructs the vhost device to use the
@@ -39,6 +92,7 @@ VhostShadowVirtqueue *vhost_svq_new(void)
goto err_init_hdev_call;
}
+ event_notifier_init_fd(&svq->svq_kick, VHOST_FILE_UNBIND);
return g_steal_pointer(&svq);
err_init_hdev_call:
@@ -56,6 +110,7 @@ err_init_hdev_kick:
void vhost_svq_free(gpointer pvq)
{
VhostShadowVirtqueue *vq = pvq;
+ vhost_svq_stop(vq);
event_notifier_cleanup(&vq->hdev_kick);
event_notifier_cleanup(&vq->hdev_call);
g_free(vq);
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index 6c67d5f034..9c7cb32bdd 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -17,12 +17,14 @@
#include "hw/virtio/vhost.h"
#include "hw/virtio/vhost-backend.h"
#include "hw/virtio/virtio-net.h"
+#include "hw/virtio/vhost-shadow-virtqueue.h"
#include "hw/virtio/vhost-vdpa.h"
#include "exec/address-spaces.h"
#include "qemu/main-loop.h"
#include "cpu.h"
#include "trace.h"
#include "qemu-common.h"
+#include "qapi/error.h"
/*
* Return one past the end of the end of section. Be careful with uint64_t
@@ -342,6 +344,30 @@ static bool vhost_vdpa_one_time_request(struct vhost_dev *dev)
return v->index != 0;
}
+static int vhost_vdpa_init_svq(struct vhost_dev *hdev, struct vhost_vdpa *v,
+ Error **errp)
+{
+ g_autoptr(GPtrArray) shadow_vqs = NULL;
+
+ if (!v->shadow_vqs_enabled) {
+ return 0;
+ }
+
+ shadow_vqs = g_ptr_array_new_full(hdev->nvqs, vhost_svq_free);
+ for (unsigned n = 0; n < hdev->nvqs; ++n) {
+ g_autoptr(VhostShadowVirtqueue) svq = vhost_svq_new();
+
+ if (unlikely(!svq)) {
+ error_setg(errp, "Cannot create svq %u", n);
+ return -1;
+ }
+ g_ptr_array_add(shadow_vqs, g_steal_pointer(&svq));
+ }
+
+ v->shadow_vqs = g_steal_pointer(&shadow_vqs);
+ return 0;
+}
+
static int vhost_vdpa_init(struct vhost_dev *dev, void *opaque, Error **errp)
{
struct vhost_vdpa *v;
@@ -364,6 +390,10 @@ static int vhost_vdpa_init(struct vhost_dev *dev, void *opaque, Error **errp)
dev->opaque = opaque ;
v->listener = vhost_vdpa_memory_listener;
v->msg_type = VHOST_IOTLB_MSG_V2;
+ ret = vhost_vdpa_init_svq(dev, v, errp);
+ if (ret) {
+ goto err;
+ }
vhost_vdpa_get_iova_range(v);
@@ -375,6 +405,10 @@ static int vhost_vdpa_init(struct vhost_dev *dev, void *opaque, Error **errp)
VIRTIO_CONFIG_S_DRIVER);
return 0;
+
+err:
+ ram_block_discard_disable(false);
+ return ret;
}
static void vhost_vdpa_host_notifier_uninit(struct vhost_dev *dev,
@@ -445,8 +479,14 @@ static void vhost_vdpa_host_notifiers_uninit(struct vhost_dev *dev, int n)
static void vhost_vdpa_host_notifiers_init(struct vhost_dev *dev)
{
+ struct vhost_vdpa *v = dev->opaque;
int i;
+ if (v->shadow_vqs_enabled) {
+ /* FIXME SVQ is not compatible with host notifiers mr */
+ return;
+ }
+
for (i = dev->vq_index; i < dev->vq_index + dev->nvqs; i++) {
if (vhost_vdpa_host_notifier_init(dev, i)) {
goto err;
@@ -460,6 +500,21 @@ err:
return;
}
+static void vhost_vdpa_svq_cleanup(struct vhost_dev *dev)
+{
+ struct vhost_vdpa *v = dev->opaque;
+ size_t idx;
+
+ if (!v->shadow_vqs) {
+ return;
+ }
+
+ for (idx = 0; idx < v->shadow_vqs->len; ++idx) {
+ vhost_svq_stop(g_ptr_array_index(v->shadow_vqs, idx));
+ }
+ g_ptr_array_free(v->shadow_vqs, true);
+}
+
static int vhost_vdpa_cleanup(struct vhost_dev *dev)
{
struct vhost_vdpa *v;
@@ -468,6 +523,7 @@ static int vhost_vdpa_cleanup(struct vhost_dev *dev)
trace_vhost_vdpa_cleanup(dev, v);
vhost_vdpa_host_notifiers_uninit(dev, dev->nvqs);
memory_listener_unregister(&v->listener);
+ vhost_vdpa_svq_cleanup(dev);
dev->opaque = NULL;
ram_block_discard_disable(false);
@@ -559,11 +615,26 @@ static int vhost_vdpa_get_device_id(struct vhost_dev *dev,
return ret;
}
+static void vhost_vdpa_reset_svq(struct vhost_vdpa *v)
+{
+ if (!v->shadow_vqs_enabled) {
+ return;
+ }
+
+ for (unsigned i = 0; i < v->shadow_vqs->len; ++i) {
+ VhostShadowVirtqueue *svq = g_ptr_array_index(v->shadow_vqs, i);
+ vhost_svq_stop(svq);
+ }
+}
+
static int vhost_vdpa_reset_device(struct vhost_dev *dev)
{
+ struct vhost_vdpa *v = dev->opaque;
int ret;
uint8_t status = 0;
+ vhost_vdpa_reset_svq(v);
+
ret = vhost_vdpa_call(dev, VHOST_VDPA_SET_STATUS, &status);
trace_vhost_vdpa_reset_device(dev, status);
return ret;
@@ -647,13 +718,74 @@ static int vhost_vdpa_get_config(struct vhost_dev *dev, uint8_t *config,
return ret;
}
+static int vhost_vdpa_set_vring_dev_kick(struct vhost_dev *dev,
+ struct vhost_vring_file *file)
+{
+ trace_vhost_vdpa_set_vring_kick(dev, file->index, file->fd);
+ return vhost_vdpa_call(dev, VHOST_SET_VRING_KICK, file);
+}
+
+/**
+ * Set the shadow virtqueue descriptors to the device
+ *
+ * @dev: The vhost device model
+ * @svq: The shadow virtqueue
+ * @idx: The index of the virtqueue in the vhost device
+ * @errp: Error
+ */
+static bool vhost_vdpa_svq_setup(struct vhost_dev *dev,
+ VhostShadowVirtqueue *svq, unsigned idx,
+ Error **errp)
+{
+ struct vhost_vring_file file = {
+ .index = dev->vq_index + idx,
+ };
+ const EventNotifier *event_notifier = &svq->hdev_kick;
+ int r;
+
+ file.fd = event_notifier_get_fd(event_notifier);
+ r = vhost_vdpa_set_vring_dev_kick(dev, &file);
+ if (unlikely(r != 0)) {
+ error_setg_errno(errp, -r, "Can't set device kick fd");
+ }
+
+ return r == 0;
+}
+
+static bool vhost_vdpa_svqs_start(struct vhost_dev *dev)
+{
+ struct vhost_vdpa *v = dev->opaque;
+ Error *err = NULL;
+ unsigned i;
+
+ if (!v->shadow_vqs) {
+ return true;
+ }
+
+ for (i = 0; i < v->shadow_vqs->len; ++i) {
+ VhostShadowVirtqueue *svq = g_ptr_array_index(v->shadow_vqs, i);
+ bool ok = vhost_vdpa_svq_setup(dev, svq, i, &err);
+ if (unlikely(!ok)) {
+ error_reportf_err(err, "Cannot setup SVQ %u: ", i);
+ return false;
+ }
+ }
+
+ return true;
+}
+
static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
{
struct vhost_vdpa *v = dev->opaque;
+ bool ok;
trace_vhost_vdpa_dev_start(dev, started);
if (started) {
vhost_vdpa_host_notifiers_init(dev);
+ ok = vhost_vdpa_svqs_start(dev);
+ if (unlikely(!ok)) {
+ return -1;
+ }
vhost_vdpa_set_vring_ready(dev);
} else {
vhost_vdpa_host_notifiers_uninit(dev, dev->nvqs);
@@ -725,8 +857,16 @@ static int vhost_vdpa_get_vring_base(struct vhost_dev *dev,
static int vhost_vdpa_set_vring_kick(struct vhost_dev *dev,
struct vhost_vring_file *file)
{
- trace_vhost_vdpa_set_vring_kick(dev, file->index, file->fd);
- return vhost_vdpa_call(dev, VHOST_SET_VRING_KICK, file);
+ struct vhost_vdpa *v = dev->opaque;
+ int vdpa_idx = file->index - dev->vq_index;
+
+ if (v->shadow_vqs_enabled) {
+ VhostShadowVirtqueue *svq = g_ptr_array_index(v->shadow_vqs, vdpa_idx);
+ vhost_svq_set_svq_kick_fd(svq, file->fd);
+ return 0;
+ } else {
+ return vhost_vdpa_set_vring_dev_kick(dev, file);
+ }
}
static int vhost_vdpa_set_vring_call(struct vhost_dev *dev,
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 03/15] vhost: Add Shadow VirtQueue call forwarding capabilities
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 01/15] vhost: Add VhostShadowVirtqueue Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 02/15] vhost: Add Shadow VirtQueue kick forwarding capabilities Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 04/15] vhost: Add vhost_svq_valid_features to shadow vq Eugenio Pérez
` (11 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
This will make qemu aware of the device used buffers, allowing it to
write the guest memory with its contents if needed.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
hw/virtio/vhost-shadow-virtqueue.h | 4 ++++
hw/virtio/vhost-shadow-virtqueue.c | 38 ++++++++++++++++++++++++++++++
hw/virtio/vhost-vdpa.c | 31 ++++++++++++++++++++++--
3 files changed, 71 insertions(+), 2 deletions(-)
diff --git a/hw/virtio/vhost-shadow-virtqueue.h b/hw/virtio/vhost-shadow-virtqueue.h
index 1cbc87d5d8..cbc5213579 100644
--- a/hw/virtio/vhost-shadow-virtqueue.h
+++ b/hw/virtio/vhost-shadow-virtqueue.h
@@ -28,9 +28,13 @@ typedef struct VhostShadowVirtqueue {
* So shadow virtqueue must not clean it, or we would lose VirtQueue one.
*/
EventNotifier svq_kick;
+
+ /* Guest's call notifier, where the SVQ calls guest. */
+ EventNotifier svq_call;
} VhostShadowVirtqueue;
void vhost_svq_set_svq_kick_fd(VhostShadowVirtqueue *svq, int svq_kick_fd);
+void vhost_svq_set_svq_call_fd(VhostShadowVirtqueue *svq, int call_fd);
void vhost_svq_stop(VhostShadowVirtqueue *svq);
diff --git a/hw/virtio/vhost-shadow-virtqueue.c b/hw/virtio/vhost-shadow-virtqueue.c
index e5da907b8e..55cb5414ef 100644
--- a/hw/virtio/vhost-shadow-virtqueue.c
+++ b/hw/virtio/vhost-shadow-virtqueue.c
@@ -26,6 +26,42 @@ static void vhost_handle_guest_kick(EventNotifier *n)
event_notifier_set(&svq->hdev_kick);
}
+/**
+ * Forward vhost notifications
+ *
+ * @n: hdev call event notifier, the one that device set to notify svq.
+ */
+static void vhost_svq_handle_call(EventNotifier *n)
+{
+ VhostShadowVirtqueue *svq = container_of(n, VhostShadowVirtqueue,
+ hdev_call);
+ event_notifier_test_and_clear(n);
+ event_notifier_set(&svq->svq_call);
+}
+
+/**
+ * Set the call notifier for the SVQ to call the guest
+ *
+ * @svq: Shadow virtqueue
+ * @call_fd: call notifier
+ *
+ * Called on BQL context.
+ */
+void vhost_svq_set_svq_call_fd(VhostShadowVirtqueue *svq, int call_fd)
+{
+ if (call_fd == VHOST_FILE_UNBIND) {
+ /*
+ * Fail event_notifier_set if called handling device call.
+ *
+ * SVQ still needs device notifications, since it needs to keep
+ * forwarding used buffers even with the unbind.
+ */
+ memset(&svq->svq_call, 0, sizeof(svq->svq_call));
+ } else {
+ event_notifier_init_fd(&svq->svq_call, call_fd);
+ }
+}
+
/**
* Set a new file descriptor for the guest to kick the SVQ and notify for avail
*
@@ -93,6 +129,7 @@ VhostShadowVirtqueue *vhost_svq_new(void)
}
event_notifier_init_fd(&svq->svq_kick, VHOST_FILE_UNBIND);
+ event_notifier_set_handler(&svq->hdev_call, vhost_svq_handle_call);
return g_steal_pointer(&svq);
err_init_hdev_call:
@@ -112,6 +149,7 @@ void vhost_svq_free(gpointer pvq)
VhostShadowVirtqueue *vq = pvq;
vhost_svq_stop(vq);
event_notifier_cleanup(&vq->hdev_kick);
+ event_notifier_set_handler(&vq->hdev_call, NULL);
event_notifier_cleanup(&vq->hdev_call);
g_free(vq);
}
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index 9c7cb32bdd..9f4333cff5 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -725,6 +725,13 @@ static int vhost_vdpa_set_vring_dev_kick(struct vhost_dev *dev,
return vhost_vdpa_call(dev, VHOST_SET_VRING_KICK, file);
}
+static int vhost_vdpa_set_vring_dev_call(struct vhost_dev *dev,
+ struct vhost_vring_file *file)
+{
+ trace_vhost_vdpa_set_vring_call(dev, file->index, file->fd);
+ return vhost_vdpa_call(dev, VHOST_SET_VRING_CALL, file);
+}
+
/**
* Set the shadow virtqueue descriptors to the device
*
@@ -732,6 +739,9 @@ static int vhost_vdpa_set_vring_dev_kick(struct vhost_dev *dev,
* @svq: The shadow virtqueue
* @idx: The index of the virtqueue in the vhost device
* @errp: Error
+ *
+ * Note that this function does not rewind kick file descriptor if cannot set
+ * call one.
*/
static bool vhost_vdpa_svq_setup(struct vhost_dev *dev,
VhostShadowVirtqueue *svq, unsigned idx,
@@ -747,6 +757,14 @@ static bool vhost_vdpa_svq_setup(struct vhost_dev *dev,
r = vhost_vdpa_set_vring_dev_kick(dev, &file);
if (unlikely(r != 0)) {
error_setg_errno(errp, -r, "Can't set device kick fd");
+ return false;
+ }
+
+ event_notifier = &svq->hdev_call;
+ file.fd = event_notifier_get_fd(event_notifier);
+ r = vhost_vdpa_set_vring_dev_call(dev, &file);
+ if (unlikely(r != 0)) {
+ error_setg_errno(errp, -r, "Can't set device call fd");
}
return r == 0;
@@ -872,8 +890,17 @@ static int vhost_vdpa_set_vring_kick(struct vhost_dev *dev,
static int vhost_vdpa_set_vring_call(struct vhost_dev *dev,
struct vhost_vring_file *file)
{
- trace_vhost_vdpa_set_vring_call(dev, file->index, file->fd);
- return vhost_vdpa_call(dev, VHOST_SET_VRING_CALL, file);
+ struct vhost_vdpa *v = dev->opaque;
+
+ if (v->shadow_vqs_enabled) {
+ int vdpa_idx = file->index - dev->vq_index;
+ VhostShadowVirtqueue *svq = g_ptr_array_index(v->shadow_vqs, vdpa_idx);
+
+ vhost_svq_set_svq_call_fd(svq, file->fd);
+ return 0;
+ } else {
+ return vhost_vdpa_set_vring_dev_call(dev, file);
+ }
}
static int vhost_vdpa_get_features(struct vhost_dev *dev,
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 04/15] vhost: Add vhost_svq_valid_features to shadow vq
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
` (2 preceding siblings ...)
2022-03-14 17:34 ` [PATCH v6 03/15] vhost: Add Shadow VirtQueue call " Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 05/15] virtio: Add vhost_svq_get_vring_addr Eugenio Pérez
` (10 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
This allows SVQ to negotiate features with the guest and the device. For
the device, SVQ is a driver. While this function bypasses all
non-transport features, it needs to disable the features that SVQ does
not support when forwarding buffers. This includes packed vq layout,
indirect descriptors or event idx.
Future changes can add support to offer more features to the guest,
since the use of VirtQueue gives this for free. This is left out at the
moment for simplicity.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
hw/virtio/vhost-shadow-virtqueue.h | 2 ++
hw/virtio/vhost-shadow-virtqueue.c | 44 ++++++++++++++++++++++++++++++
hw/virtio/vhost-vdpa.c | 15 ++++++++++
3 files changed, 61 insertions(+)
diff --git a/hw/virtio/vhost-shadow-virtqueue.h b/hw/virtio/vhost-shadow-virtqueue.h
index cbc5213579..9e12f77201 100644
--- a/hw/virtio/vhost-shadow-virtqueue.h
+++ b/hw/virtio/vhost-shadow-virtqueue.h
@@ -33,6 +33,8 @@ typedef struct VhostShadowVirtqueue {
EventNotifier svq_call;
} VhostShadowVirtqueue;
+bool vhost_svq_valid_features(uint64_t features, Error **errp);
+
void vhost_svq_set_svq_kick_fd(VhostShadowVirtqueue *svq, int svq_kick_fd);
void vhost_svq_set_svq_call_fd(VhostShadowVirtqueue *svq, int call_fd);
diff --git a/hw/virtio/vhost-shadow-virtqueue.c b/hw/virtio/vhost-shadow-virtqueue.c
index 55cb5414ef..519328445c 100644
--- a/hw/virtio/vhost-shadow-virtqueue.c
+++ b/hw/virtio/vhost-shadow-virtqueue.c
@@ -11,9 +11,53 @@
#include "hw/virtio/vhost-shadow-virtqueue.h"
#include "qemu/error-report.h"
+#include "qapi/error.h"
#include "qemu/main-loop.h"
#include "linux-headers/linux/vhost.h"
+/**
+ * Validate the transport device features that both guests can use with the SVQ
+ * and SVQs can use with the device.
+ *
+ * @dev_features: The features
+ * @errp: Error pointer
+ */
+bool vhost_svq_valid_features(uint64_t features, Error **errp)
+{
+ bool ok = true;
+ uint64_t svq_features = features;
+
+ for (uint64_t b = VIRTIO_TRANSPORT_F_START; b <= VIRTIO_TRANSPORT_F_END;
+ ++b) {
+ switch (b) {
+ case VIRTIO_F_ANY_LAYOUT:
+ continue;
+
+ case VIRTIO_F_ACCESS_PLATFORM:
+ /* SVQ trust in the host's IOMMU to translate addresses */
+ case VIRTIO_F_VERSION_1:
+ /* SVQ trust that the guest vring is little endian */
+ if (!(svq_features & BIT_ULL(b))) {
+ svq_features |= BIT_ULL(b);
+ ok = false;
+ }
+ continue;
+
+ default:
+ if (svq_features & BIT_ULL(b)) {
+ svq_features &= ~BIT_ULL(b);
+ ok = false;
+ }
+ }
+ }
+
+ if (!ok) {
+ error_setg(errp, "SVQ Invalid device feature flags, offer: 0x%"PRIx64
+ ", ok: 0x%"PRIx64, features, svq_features);
+ }
+ return ok;
+}
+
/**
* Forward guest notifications.
*
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index 9f4333cff5..4e1deb3d04 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -348,11 +348,26 @@ static int vhost_vdpa_init_svq(struct vhost_dev *hdev, struct vhost_vdpa *v,
Error **errp)
{
g_autoptr(GPtrArray) shadow_vqs = NULL;
+ uint64_t dev_features, svq_features;
+ int r;
+ bool ok;
if (!v->shadow_vqs_enabled) {
return 0;
}
+ r = hdev->vhost_ops->vhost_get_features(hdev, &dev_features);
+ if (r != 0) {
+ error_setg_errno(errp, -r, "Can't get vdpa device features");
+ return r;
+ }
+
+ svq_features = dev_features;
+ ok = vhost_svq_valid_features(svq_features, errp);
+ if (unlikely(!ok)) {
+ return -1;
+ }
+
shadow_vqs = g_ptr_array_new_full(hdev->nvqs, vhost_svq_free);
for (unsigned n = 0; n < hdev->nvqs; ++n) {
g_autoptr(VhostShadowVirtqueue) svq = vhost_svq_new();
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 05/15] virtio: Add vhost_svq_get_vring_addr
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
` (3 preceding siblings ...)
2022-03-14 17:34 ` [PATCH v6 04/15] vhost: Add vhost_svq_valid_features to shadow vq Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 06/15] vdpa: adapt vhost_ops callbacks to svq Eugenio Pérez
` (9 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
It reports the shadow virtqueue address from qemu virtual address space.
Since this will be different from the guest's vaddr, but the device can
access it, SVQ takes special care about its alignment & lack of garbage
data. It assumes that IOMMU will work in host_page_size ranges for that.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
hw/virtio/vhost-shadow-virtqueue.h | 9 +++++++++
hw/virtio/vhost-shadow-virtqueue.c | 29 +++++++++++++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/hw/virtio/vhost-shadow-virtqueue.h b/hw/virtio/vhost-shadow-virtqueue.h
index 9e12f77201..82cea1c3fa 100644
--- a/hw/virtio/vhost-shadow-virtqueue.h
+++ b/hw/virtio/vhost-shadow-virtqueue.h
@@ -11,9 +11,14 @@
#define VHOST_SHADOW_VIRTQUEUE_H
#include "qemu/event_notifier.h"
+#include "hw/virtio/virtio.h"
+#include "standard-headers/linux/vhost_types.h"
/* Shadow virtqueue to relay notifications */
typedef struct VhostShadowVirtqueue {
+ /* Shadow vring */
+ struct vring vring;
+
/* Shadow kick notifier, sent to vhost */
EventNotifier hdev_kick;
/* Shadow call notifier, sent to vhost */
@@ -37,6 +42,10 @@ bool vhost_svq_valid_features(uint64_t features, Error **errp);
void vhost_svq_set_svq_kick_fd(VhostShadowVirtqueue *svq, int svq_kick_fd);
void vhost_svq_set_svq_call_fd(VhostShadowVirtqueue *svq, int call_fd);
+void vhost_svq_get_vring_addr(const VhostShadowVirtqueue *svq,
+ struct vhost_vring_addr *addr);
+size_t vhost_svq_driver_area_size(const VhostShadowVirtqueue *svq);
+size_t vhost_svq_device_area_size(const VhostShadowVirtqueue *svq);
void vhost_svq_stop(VhostShadowVirtqueue *svq);
diff --git a/hw/virtio/vhost-shadow-virtqueue.c b/hw/virtio/vhost-shadow-virtqueue.c
index 519328445c..573ac0d9cf 100644
--- a/hw/virtio/vhost-shadow-virtqueue.c
+++ b/hw/virtio/vhost-shadow-virtqueue.c
@@ -106,6 +106,35 @@ void vhost_svq_set_svq_call_fd(VhostShadowVirtqueue *svq, int call_fd)
}
}
+/**
+ * Get the shadow vq vring address.
+ * @svq: Shadow virtqueue
+ * @addr: Destination to store address
+ */
+void vhost_svq_get_vring_addr(const VhostShadowVirtqueue *svq,
+ struct vhost_vring_addr *addr)
+{
+ addr->desc_user_addr = (uint64_t)(intptr_t)svq->vring.desc;
+ addr->avail_user_addr = (uint64_t)(intptr_t)svq->vring.avail;
+ addr->used_user_addr = (uint64_t)(intptr_t)svq->vring.used;
+}
+
+size_t vhost_svq_driver_area_size(const VhostShadowVirtqueue *svq)
+{
+ size_t desc_size = sizeof(vring_desc_t) * svq->vring.num;
+ size_t avail_size = offsetof(vring_avail_t, ring) +
+ sizeof(uint16_t) * svq->vring.num;
+
+ return ROUND_UP(desc_size + avail_size, qemu_real_host_page_size);
+}
+
+size_t vhost_svq_device_area_size(const VhostShadowVirtqueue *svq)
+{
+ size_t used_size = offsetof(vring_used_t, ring) +
+ sizeof(vring_used_elem_t) * svq->vring.num;
+ return ROUND_UP(used_size, qemu_real_host_page_size);
+}
+
/**
* Set a new file descriptor for the guest to kick the SVQ and notify for avail
*
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 06/15] vdpa: adapt vhost_ops callbacks to svq
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
` (4 preceding siblings ...)
2022-03-14 17:34 ` [PATCH v6 05/15] virtio: Add vhost_svq_get_vring_addr Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 07/15] vhost: Shadow virtqueue buffers forwarding Eugenio Pérez
` (8 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
First half of the buffers forwarding part, preparing vhost-vdpa
callbacks to SVQ to offer it. QEMU cannot enable it at this moment, so
this is effectively dead code at the moment, but it helps to reduce
patch size.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
hw/virtio/vhost-vdpa.c | 48 ++++++++++++++++++++++++++++++++++++------
1 file changed, 41 insertions(+), 7 deletions(-)
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index 4e1deb3d04..3e2c181d2b 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -733,6 +733,13 @@ static int vhost_vdpa_get_config(struct vhost_dev *dev, uint8_t *config,
return ret;
}
+static int vhost_vdpa_set_dev_vring_base(struct vhost_dev *dev,
+ struct vhost_vring_state *ring)
+{
+ trace_vhost_vdpa_set_vring_base(dev, ring->index, ring->num);
+ return vhost_vdpa_call(dev, VHOST_SET_VRING_BASE, ring);
+}
+
static int vhost_vdpa_set_vring_dev_kick(struct vhost_dev *dev,
struct vhost_vring_file *file)
{
@@ -747,6 +754,18 @@ static int vhost_vdpa_set_vring_dev_call(struct vhost_dev *dev,
return vhost_vdpa_call(dev, VHOST_SET_VRING_CALL, file);
}
+static int vhost_vdpa_set_vring_dev_addr(struct vhost_dev *dev,
+ struct vhost_vring_addr *addr)
+{
+ trace_vhost_vdpa_set_vring_addr(dev, addr->index, addr->flags,
+ addr->desc_user_addr, addr->used_user_addr,
+ addr->avail_user_addr,
+ addr->log_guest_addr);
+
+ return vhost_vdpa_call(dev, VHOST_SET_VRING_ADDR, addr);
+
+}
+
/**
* Set the shadow virtqueue descriptors to the device
*
@@ -856,11 +875,17 @@ static int vhost_vdpa_set_log_base(struct vhost_dev *dev, uint64_t base,
static int vhost_vdpa_set_vring_addr(struct vhost_dev *dev,
struct vhost_vring_addr *addr)
{
- trace_vhost_vdpa_set_vring_addr(dev, addr->index, addr->flags,
- addr->desc_user_addr, addr->used_user_addr,
- addr->avail_user_addr,
- addr->log_guest_addr);
- return vhost_vdpa_call(dev, VHOST_SET_VRING_ADDR, addr);
+ struct vhost_vdpa *v = dev->opaque;
+
+ if (v->shadow_vqs_enabled) {
+ /*
+ * Device vring addr was set at device start. SVQ base is handled by
+ * VirtQueue code.
+ */
+ return 0;
+ }
+
+ return vhost_vdpa_set_vring_dev_addr(dev, addr);
}
static int vhost_vdpa_set_vring_num(struct vhost_dev *dev,
@@ -873,8 +898,17 @@ static int vhost_vdpa_set_vring_num(struct vhost_dev *dev,
static int vhost_vdpa_set_vring_base(struct vhost_dev *dev,
struct vhost_vring_state *ring)
{
- trace_vhost_vdpa_set_vring_base(dev, ring->index, ring->num);
- return vhost_vdpa_call(dev, VHOST_SET_VRING_BASE, ring);
+ struct vhost_vdpa *v = dev->opaque;
+
+ if (v->shadow_vqs_enabled) {
+ /*
+ * Device vring base was set at device start. SVQ base is handled by
+ * VirtQueue code.
+ */
+ return 0;
+ }
+
+ return vhost_vdpa_set_dev_vring_base(dev, ring);
}
static int vhost_vdpa_get_vring_base(struct vhost_dev *dev,
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 07/15] vhost: Shadow virtqueue buffers forwarding
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
` (5 preceding siblings ...)
2022-03-14 17:34 ` [PATCH v6 06/15] vdpa: adapt vhost_ops callbacks to svq Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 08/15] util: Add iova_tree_alloc_map Eugenio Pérez
` (7 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
Initial version of shadow virtqueue that actually forward buffers. There
is no iommu support at the moment, and that will be addressed in future
patches of this series. Since all vhost-vdpa devices use forced IOMMU,
this means that SVQ is not usable at this point of the series on any
device.
For simplicity it only supports modern devices, that expects vring
in little endian, with split ring and no event idx or indirect
descriptors. Support for them will not be added in this series.
It reuses the VirtQueue code for the device part. The driver part is
based on Linux's virtio_ring driver, but with stripped functionality
and optimizations so it's easier to review.
However, forwarding buffers have some particular pieces: One of the most
unexpected ones is that a guest's buffer can expand through more than
one descriptor in SVQ. While this is handled gracefully by qemu's
emulated virtio devices, it may cause unexpected SVQ queue full. This
patch also solves it by checking for this condition at both guest's
kicks and device's calls. The code may be more elegant in the future if
SVQ code runs in its own iocontext.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
hw/virtio/vhost-shadow-virtqueue.h | 26 +++
hw/virtio/vhost-shadow-virtqueue.c | 352 ++++++++++++++++++++++++++++-
hw/virtio/vhost-vdpa.c | 155 ++++++++++++-
3 files changed, 522 insertions(+), 11 deletions(-)
diff --git a/hw/virtio/vhost-shadow-virtqueue.h b/hw/virtio/vhost-shadow-virtqueue.h
index 82cea1c3fa..38b3b91ca7 100644
--- a/hw/virtio/vhost-shadow-virtqueue.h
+++ b/hw/virtio/vhost-shadow-virtqueue.h
@@ -36,6 +36,30 @@ typedef struct VhostShadowVirtqueue {
/* Guest's call notifier, where the SVQ calls guest. */
EventNotifier svq_call;
+
+ /* Virtio queue shadowing */
+ VirtQueue *vq;
+
+ /* Virtio device */
+ VirtIODevice *vdev;
+
+ /* Map for use the guest's descriptors */
+ VirtQueueElement **ring_id_maps;
+
+ /* Next VirtQueue element that guest made available */
+ VirtQueueElement *next_guest_avail_elem;
+
+ /* Next head to expose to the device */
+ uint16_t shadow_avail_idx;
+
+ /* Next free descriptor */
+ uint16_t free_head;
+
+ /* Last seen used idx */
+ uint16_t shadow_used_idx;
+
+ /* Next head to consume from the device */
+ uint16_t last_used_idx;
} VhostShadowVirtqueue;
bool vhost_svq_valid_features(uint64_t features, Error **errp);
@@ -47,6 +71,8 @@ void vhost_svq_get_vring_addr(const VhostShadowVirtqueue *svq,
size_t vhost_svq_driver_area_size(const VhostShadowVirtqueue *svq);
size_t vhost_svq_device_area_size(const VhostShadowVirtqueue *svq);
+void vhost_svq_start(VhostShadowVirtqueue *svq, VirtIODevice *vdev,
+ VirtQueue *vq);
void vhost_svq_stop(VhostShadowVirtqueue *svq);
VhostShadowVirtqueue *vhost_svq_new(void);
diff --git a/hw/virtio/vhost-shadow-virtqueue.c b/hw/virtio/vhost-shadow-virtqueue.c
index 573ac0d9cf..ece50b8ece 100644
--- a/hw/virtio/vhost-shadow-virtqueue.c
+++ b/hw/virtio/vhost-shadow-virtqueue.c
@@ -13,6 +13,8 @@
#include "qemu/error-report.h"
#include "qapi/error.h"
#include "qemu/main-loop.h"
+#include "qemu/log.h"
+#include "qemu/memalign.h"
#include "linux-headers/linux/vhost.h"
/**
@@ -59,28 +61,307 @@ bool vhost_svq_valid_features(uint64_t features, Error **errp)
}
/**
- * Forward guest notifications.
+ * Number of descriptors that the SVQ can make available from the guest.
+ *
+ * @svq: The svq
+ */
+static uint16_t vhost_svq_available_slots(const VhostShadowVirtqueue *svq)
+{
+ return svq->vring.num - (svq->shadow_avail_idx - svq->shadow_used_idx);
+}
+
+static void vhost_vring_write_descs(VhostShadowVirtqueue *svq,
+ const struct iovec *iovec, size_t num,
+ bool more_descs, bool write)
+{
+ uint16_t i = svq->free_head, last = svq->free_head;
+ unsigned n;
+ uint16_t flags = write ? cpu_to_le16(VRING_DESC_F_WRITE) : 0;
+ vring_desc_t *descs = svq->vring.desc;
+
+ if (num == 0) {
+ return;
+ }
+
+ for (n = 0; n < num; n++) {
+ if (more_descs || (n + 1 < num)) {
+ descs[i].flags = flags | cpu_to_le16(VRING_DESC_F_NEXT);
+ } else {
+ descs[i].flags = flags;
+ }
+ descs[i].addr = cpu_to_le64((hwaddr)(intptr_t)iovec[n].iov_base);
+ descs[i].len = cpu_to_le32(iovec[n].iov_len);
+
+ last = i;
+ i = cpu_to_le16(descs[i].next);
+ }
+
+ svq->free_head = le16_to_cpu(descs[last].next);
+}
+
+static bool vhost_svq_add_split(VhostShadowVirtqueue *svq,
+ VirtQueueElement *elem, unsigned *head)
+{
+ unsigned avail_idx;
+ vring_avail_t *avail = svq->vring.avail;
+
+ *head = svq->free_head;
+
+ /* We need some descriptors here */
+ if (unlikely(!elem->out_num && !elem->in_num)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "Guest provided element with no descriptors");
+ return false;
+ }
+
+ vhost_vring_write_descs(svq, elem->out_sg, elem->out_num, elem->in_num > 0,
+ false);
+ vhost_vring_write_descs(svq, elem->in_sg, elem->in_num, false, true);
+
+ /*
+ * Put the entry in the available array (but don't update avail->idx until
+ * they do sync).
+ */
+ avail_idx = svq->shadow_avail_idx & (svq->vring.num - 1);
+ avail->ring[avail_idx] = cpu_to_le16(*head);
+ svq->shadow_avail_idx++;
+
+ /* Update the avail index after write the descriptor */
+ smp_wmb();
+ avail->idx = cpu_to_le16(svq->shadow_avail_idx);
+
+ return true;
+}
+
+static bool vhost_svq_add(VhostShadowVirtqueue *svq, VirtQueueElement *elem)
+{
+ unsigned qemu_head;
+ bool ok = vhost_svq_add_split(svq, elem, &qemu_head);
+ if (unlikely(!ok)) {
+ return false;
+ }
+
+ svq->ring_id_maps[qemu_head] = elem;
+ return true;
+}
+
+static void vhost_svq_kick(VhostShadowVirtqueue *svq)
+{
+ /*
+ * We need to expose the available array entries before checking the used
+ * flags
+ */
+ smp_mb();
+ if (svq->vring.used->flags & VRING_USED_F_NO_NOTIFY) {
+ return;
+ }
+
+ event_notifier_set(&svq->hdev_kick);
+}
+
+/**
+ * Forward available buffers.
+ *
+ * @svq: Shadow VirtQueue
+ *
+ * Note that this function does not guarantee that all guest's available
+ * buffers are available to the device in SVQ avail ring. The guest may have
+ * exposed a GPA / GIOVA contiguous buffer, but it may not be contiguous in
+ * qemu vaddr.
+ *
+ * If that happens, guest's kick notifications will be disabled until the
+ * device uses some buffers.
+ */
+static void vhost_handle_guest_kick(VhostShadowVirtqueue *svq)
+{
+ /* Clear event notifier */
+ event_notifier_test_and_clear(&svq->svq_kick);
+
+ /* Forward to the device as many available buffers as possible */
+ do {
+ virtio_queue_set_notification(svq->vq, false);
+
+ while (true) {
+ VirtQueueElement *elem;
+ bool ok;
+
+ if (svq->next_guest_avail_elem) {
+ elem = g_steal_pointer(&svq->next_guest_avail_elem);
+ } else {
+ elem = virtqueue_pop(svq->vq, sizeof(*elem));
+ }
+
+ if (!elem) {
+ break;
+ }
+
+ if (elem->out_num + elem->in_num > vhost_svq_available_slots(svq)) {
+ /*
+ * This condition is possible since a contiguous buffer in GPA
+ * does not imply a contiguous buffer in qemu's VA
+ * scatter-gather segments. If that happens, the buffer exposed
+ * to the device needs to be a chain of descriptors at this
+ * moment.
+ *
+ * SVQ cannot hold more available buffers if we are here:
+ * queue the current guest descriptor and ignore further kicks
+ * until some elements are used.
+ */
+ svq->next_guest_avail_elem = elem;
+ return;
+ }
+
+ ok = vhost_svq_add(svq, elem);
+ if (unlikely(!ok)) {
+ /* VQ is broken, just return and ignore any other kicks */
+ return;
+ }
+ vhost_svq_kick(svq);
+ }
+
+ virtio_queue_set_notification(svq->vq, true);
+ } while (!virtio_queue_empty(svq->vq));
+}
+
+/**
+ * Handle guest's kick.
*
* @n: guest kick event notifier, the one that guest set to notify svq.
*/
-static void vhost_handle_guest_kick(EventNotifier *n)
+static void vhost_handle_guest_kick_notifier(EventNotifier *n)
{
VhostShadowVirtqueue *svq = container_of(n, VhostShadowVirtqueue, svq_kick);
event_notifier_test_and_clear(n);
- event_notifier_set(&svq->hdev_kick);
+ vhost_handle_guest_kick(svq);
+}
+
+static bool vhost_svq_more_used(VhostShadowVirtqueue *svq)
+{
+ if (svq->last_used_idx != svq->shadow_used_idx) {
+ return true;
+ }
+
+ svq->shadow_used_idx = cpu_to_le16(svq->vring.used->idx);
+
+ return svq->last_used_idx != svq->shadow_used_idx;
}
/**
- * Forward vhost notifications
+ * Enable vhost device calls after disable them.
+ *
+ * @svq: The svq
+ *
+ * It returns false if there are pending used buffers from the vhost device,
+ * avoiding the possible races between SVQ checking for more work and enabling
+ * callbacks. True if SVQ used vring has no more pending buffers.
+ */
+static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq)
+{
+ svq->vring.avail->flags &= ~cpu_to_le16(VRING_AVAIL_F_NO_INTERRUPT);
+ /* Make sure the flag is written before the read of used_idx */
+ smp_mb();
+ return !vhost_svq_more_used(svq);
+}
+
+static void vhost_svq_disable_notification(VhostShadowVirtqueue *svq)
+{
+ svq->vring.avail->flags |= cpu_to_le16(VRING_AVAIL_F_NO_INTERRUPT);
+}
+
+static VirtQueueElement *vhost_svq_get_buf(VhostShadowVirtqueue *svq,
+ uint32_t *len)
+{
+ vring_desc_t *descs = svq->vring.desc;
+ const vring_used_t *used = svq->vring.used;
+ vring_used_elem_t used_elem;
+ uint16_t last_used;
+
+ if (!vhost_svq_more_used(svq)) {
+ return NULL;
+ }
+
+ /* Only get used array entries after they have been exposed by dev */
+ smp_rmb();
+ last_used = svq->last_used_idx & (svq->vring.num - 1);
+ used_elem.id = le32_to_cpu(used->ring[last_used].id);
+ used_elem.len = le32_to_cpu(used->ring[last_used].len);
+
+ svq->last_used_idx++;
+ if (unlikely(used_elem.id >= svq->vring.num)) {
+ qemu_log_mask(LOG_GUEST_ERROR, "Device %s says index %u is used",
+ svq->vdev->name, used_elem.id);
+ return NULL;
+ }
+
+ if (unlikely(!svq->ring_id_maps[used_elem.id])) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "Device %s says index %u is used, but it was not available",
+ svq->vdev->name, used_elem.id);
+ return NULL;
+ }
+
+ descs[used_elem.id].next = svq->free_head;
+ svq->free_head = used_elem.id;
+
+ *len = used_elem.len;
+ return g_steal_pointer(&svq->ring_id_maps[used_elem.id]);
+}
+
+static void vhost_svq_flush(VhostShadowVirtqueue *svq,
+ bool check_for_avail_queue)
+{
+ VirtQueue *vq = svq->vq;
+
+ /* Forward as many used buffers as possible. */
+ do {
+ unsigned i = 0;
+
+ vhost_svq_disable_notification(svq);
+ while (true) {
+ uint32_t len;
+ g_autofree VirtQueueElement *elem = vhost_svq_get_buf(svq, &len);
+ if (!elem) {
+ break;
+ }
+
+ if (unlikely(i >= svq->vring.num)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "More than %u used buffers obtained in a %u size SVQ",
+ i, svq->vring.num);
+ virtqueue_fill(vq, elem, len, i);
+ virtqueue_flush(vq, i);
+ return;
+ }
+ virtqueue_fill(vq, elem, len, i++);
+ }
+
+ virtqueue_flush(vq, i);
+ event_notifier_set(&svq->svq_call);
+
+ if (check_for_avail_queue && svq->next_guest_avail_elem) {
+ /*
+ * Avail ring was full when vhost_svq_flush was called, so it's a
+ * good moment to make more descriptors available if possible.
+ */
+ vhost_handle_guest_kick(svq);
+ }
+ } while (!vhost_svq_enable_notification(svq));
+}
+
+/**
+ * Forward used buffers.
*
* @n: hdev call event notifier, the one that device set to notify svq.
+ *
+ * Note that we are not making any buffers available in the loop, there is no
+ * way that it runs more than virtqueue size times.
*/
static void vhost_svq_handle_call(EventNotifier *n)
{
VhostShadowVirtqueue *svq = container_of(n, VhostShadowVirtqueue,
hdev_call);
event_notifier_test_and_clear(n);
- event_notifier_set(&svq->svq_call);
+ vhost_svq_flush(svq, true);
}
/**
@@ -161,7 +442,41 @@ void vhost_svq_set_svq_kick_fd(VhostShadowVirtqueue *svq, int svq_kick_fd)
if (poll_start) {
event_notifier_init_fd(svq_kick, svq_kick_fd);
event_notifier_set(svq_kick);
- event_notifier_set_handler(svq_kick, vhost_handle_guest_kick);
+ event_notifier_set_handler(svq_kick, vhost_handle_guest_kick_notifier);
+ }
+}
+
+/**
+ * Start the shadow virtqueue operation.
+ *
+ * @svq: Shadow Virtqueue
+ * @vdev: VirtIO device
+ * @vq: Virtqueue to shadow
+ */
+void vhost_svq_start(VhostShadowVirtqueue *svq, VirtIODevice *vdev,
+ VirtQueue *vq)
+{
+ size_t desc_size, driver_size, device_size;
+
+ svq->next_guest_avail_elem = NULL;
+ svq->shadow_avail_idx = 0;
+ svq->shadow_used_idx = 0;
+ svq->last_used_idx = 0;
+ svq->vdev = vdev;
+ svq->vq = vq;
+
+ svq->vring.num = virtio_queue_get_num(vdev, virtio_get_queue_index(vq));
+ driver_size = vhost_svq_driver_area_size(svq);
+ device_size = vhost_svq_device_area_size(svq);
+ svq->vring.desc = qemu_memalign(qemu_real_host_page_size, driver_size);
+ desc_size = sizeof(vring_desc_t) * svq->vring.num;
+ svq->vring.avail = (void *)((char *)svq->vring.desc + desc_size);
+ memset(svq->vring.desc, 0, driver_size);
+ svq->vring.used = qemu_memalign(qemu_real_host_page_size, device_size);
+ memset(svq->vring.used, 0, device_size);
+ svq->ring_id_maps = g_new0(VirtQueueElement *, svq->vring.num);
+ for (unsigned i = 0; i < svq->vring.num - 1; i++) {
+ svq->vring.desc[i].next = cpu_to_le16(i + 1);
}
}
@@ -172,6 +487,31 @@ void vhost_svq_set_svq_kick_fd(VhostShadowVirtqueue *svq, int svq_kick_fd)
void vhost_svq_stop(VhostShadowVirtqueue *svq)
{
event_notifier_set_handler(&svq->svq_kick, NULL);
+ g_autofree VirtQueueElement *next_avail_elem = NULL;
+
+ if (!svq->vq) {
+ return;
+ }
+
+ /* Send all pending used descriptors to guest */
+ vhost_svq_flush(svq, false);
+
+ for (unsigned i = 0; i < svq->vring.num; ++i) {
+ g_autofree VirtQueueElement *elem = NULL;
+ elem = g_steal_pointer(&svq->ring_id_maps[i]);
+ if (elem) {
+ virtqueue_detach_element(svq->vq, elem, 0);
+ }
+ }
+
+ next_avail_elem = g_steal_pointer(&svq->next_guest_avail_elem);
+ if (next_avail_elem) {
+ virtqueue_detach_element(svq->vq, next_avail_elem, 0);
+ }
+ svq->vq = NULL;
+ g_free(svq->ring_id_maps);
+ qemu_vfree(svq->vring.desc);
+ qemu_vfree(svq->vring.used);
}
/**
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index 3e2c181d2b..297505f331 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -777,9 +777,9 @@ static int vhost_vdpa_set_vring_dev_addr(struct vhost_dev *dev,
* Note that this function does not rewind kick file descriptor if cannot set
* call one.
*/
-static bool vhost_vdpa_svq_setup(struct vhost_dev *dev,
- VhostShadowVirtqueue *svq, unsigned idx,
- Error **errp)
+static int vhost_vdpa_svq_set_fds(struct vhost_dev *dev,
+ VhostShadowVirtqueue *svq, unsigned idx,
+ Error **errp)
{
struct vhost_vring_file file = {
.index = dev->vq_index + idx,
@@ -791,7 +791,7 @@ static bool vhost_vdpa_svq_setup(struct vhost_dev *dev,
r = vhost_vdpa_set_vring_dev_kick(dev, &file);
if (unlikely(r != 0)) {
error_setg_errno(errp, -r, "Can't set device kick fd");
- return false;
+ return r;
}
event_notifier = &svq->hdev_call;
@@ -801,6 +801,95 @@ static bool vhost_vdpa_svq_setup(struct vhost_dev *dev,
error_setg_errno(errp, -r, "Can't set device call fd");
}
+ return r;
+}
+
+/**
+ * Unmap a SVQ area in the device
+ */
+static bool vhost_vdpa_svq_unmap_ring(struct vhost_vdpa *v, hwaddr iova,
+ hwaddr size)
+{
+ int r;
+
+ size = ROUND_UP(size, qemu_real_host_page_size);
+ r = vhost_vdpa_dma_unmap(v, iova, size);
+ return r == 0;
+}
+
+static bool vhost_vdpa_svq_unmap_rings(struct vhost_dev *dev,
+ const VhostShadowVirtqueue *svq)
+{
+ struct vhost_vdpa *v = dev->opaque;
+ struct vhost_vring_addr svq_addr;
+ size_t device_size = vhost_svq_device_area_size(svq);
+ size_t driver_size = vhost_svq_driver_area_size(svq);
+ bool ok;
+
+ vhost_svq_get_vring_addr(svq, &svq_addr);
+
+ ok = vhost_vdpa_svq_unmap_ring(v, svq_addr.desc_user_addr, driver_size);
+ if (unlikely(!ok)) {
+ return false;
+ }
+
+ return vhost_vdpa_svq_unmap_ring(v, svq_addr.used_user_addr, device_size);
+}
+
+/**
+ * Map the shadow virtqueue rings in the device
+ *
+ * @dev: The vhost device
+ * @svq: The shadow virtqueue
+ * @addr: Assigned IOVA addresses
+ * @errp: Error pointer
+ */
+static bool vhost_vdpa_svq_map_rings(struct vhost_dev *dev,
+ const VhostShadowVirtqueue *svq,
+ struct vhost_vring_addr *addr,
+ Error **errp)
+{
+ struct vhost_vdpa *v = dev->opaque;
+ size_t device_size = vhost_svq_device_area_size(svq);
+ size_t driver_size = vhost_svq_driver_area_size(svq);
+ int r;
+
+ ERRP_GUARD();
+ vhost_svq_get_vring_addr(svq, addr);
+
+ r = vhost_vdpa_dma_map(v, addr->desc_user_addr, driver_size,
+ (void *)(uintptr_t)addr->desc_user_addr, true);
+ if (unlikely(r != 0)) {
+ error_setg_errno(errp, -r, "Cannot create vq driver region: ");
+ return false;
+ }
+
+ r = vhost_vdpa_dma_map(v, addr->used_user_addr, device_size,
+ (void *)(intptr_t)addr->used_user_addr, false);
+ if (unlikely(r != 0)) {
+ error_setg_errno(errp, -r, "Cannot create vq device region: ");
+ }
+
+ return r == 0;
+}
+
+static bool vhost_vdpa_svq_setup(struct vhost_dev *dev,
+ VhostShadowVirtqueue *svq, unsigned idx,
+ Error **errp)
+{
+ uint16_t vq_index = dev->vq_index + idx;
+ struct vhost_vring_state s = {
+ .index = vq_index,
+ };
+ int r;
+
+ r = vhost_vdpa_set_dev_vring_base(dev, &s);
+ if (unlikely(r)) {
+ error_setg_errno(errp, -r, "Cannot set vring base");
+ return false;
+ }
+
+ r = vhost_vdpa_svq_set_fds(dev, svq, idx, errp);
return r == 0;
}
@@ -815,10 +904,62 @@ static bool vhost_vdpa_svqs_start(struct vhost_dev *dev)
}
for (i = 0; i < v->shadow_vqs->len; ++i) {
+ VirtQueue *vq = virtio_get_queue(dev->vdev, dev->vq_index + i);
VhostShadowVirtqueue *svq = g_ptr_array_index(v->shadow_vqs, i);
+ struct vhost_vring_addr addr = {
+ .index = i,
+ };
+ int r;
bool ok = vhost_vdpa_svq_setup(dev, svq, i, &err);
if (unlikely(!ok)) {
- error_reportf_err(err, "Cannot setup SVQ %u: ", i);
+ goto err;
+ }
+
+ vhost_svq_start(svq, dev->vdev, vq);
+ ok = vhost_vdpa_svq_map_rings(dev, svq, &addr, &err);
+ if (unlikely(!ok)) {
+ goto err_map;
+ }
+
+ /* Override vring GPA set by vhost subsystem */
+ r = vhost_vdpa_set_vring_dev_addr(dev, &addr);
+ if (unlikely(r != 0)) {
+ error_setg_errno(&err, -r, "Cannot set device address");
+ goto err_set_addr;
+ }
+ }
+
+ return true;
+
+err_set_addr:
+ vhost_vdpa_svq_unmap_rings(dev, g_ptr_array_index(v->shadow_vqs, i));
+
+err_map:
+ vhost_svq_stop(g_ptr_array_index(v->shadow_vqs, i));
+
+err:
+ error_reportf_err(err, "Cannot setup SVQ %u: ", i);
+ for (unsigned j = 0; j < i; ++j) {
+ VhostShadowVirtqueue *svq = g_ptr_array_index(v->shadow_vqs, j);
+ vhost_vdpa_svq_unmap_rings(dev, svq);
+ vhost_svq_stop(svq);
+ }
+
+ return false;
+}
+
+static bool vhost_vdpa_svqs_stop(struct vhost_dev *dev)
+{
+ struct vhost_vdpa *v = dev->opaque;
+
+ if (!v->shadow_vqs) {
+ return true;
+ }
+
+ for (unsigned i = 0; i < v->shadow_vqs->len; ++i) {
+ VhostShadowVirtqueue *svq = g_ptr_array_index(v->shadow_vqs, i);
+ bool ok = vhost_vdpa_svq_unmap_rings(dev, svq);
+ if (unlikely(!ok)) {
return false;
}
}
@@ -840,6 +981,10 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
}
vhost_vdpa_set_vring_ready(dev);
} else {
+ ok = vhost_vdpa_svqs_stop(dev);
+ if (unlikely(!ok)) {
+ return -1;
+ }
vhost_vdpa_host_notifiers_uninit(dev, dev->nvqs);
}
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 08/15] util: Add iova_tree_alloc_map
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
` (6 preceding siblings ...)
2022-03-14 17:34 ` [PATCH v6 07/15] vhost: Shadow virtqueue buffers forwarding Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 09/15] util: add iova_tree_find_iova Eugenio Pérez
` (6 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
This iova tree function allows it to look for a hole in allocated
regions and return a totally new translation for a given translated
address.
It's usage is mainly to allow devices to access qemu address space,
remapping guest's one into a new iova space where qemu can add chunks of
addresses.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
---
include/qemu/iova-tree.h | 18 ++++++
util/iova-tree.c | 136 +++++++++++++++++++++++++++++++++++++++
2 files changed, 154 insertions(+)
diff --git a/include/qemu/iova-tree.h b/include/qemu/iova-tree.h
index 8249edd764..d066400f09 100644
--- a/include/qemu/iova-tree.h
+++ b/include/qemu/iova-tree.h
@@ -29,6 +29,7 @@
#define IOVA_OK (0)
#define IOVA_ERR_INVALID (-1) /* Invalid parameters */
#define IOVA_ERR_OVERLAP (-2) /* IOVA range overlapped */
+#define IOVA_ERR_NOMEM (-3) /* Cannot allocate */
typedef struct IOVATree IOVATree;
typedef struct DMAMap {
@@ -119,6 +120,23 @@ const DMAMap *iova_tree_find_address(const IOVATree *tree, hwaddr iova);
*/
void iova_tree_foreach(IOVATree *tree, iova_tree_iterator iterator);
+/**
+ * iova_tree_alloc_map:
+ *
+ * @tree: the iova tree to allocate from
+ * @map: the new map (as translated addr & size) to allocate in the iova region
+ * @iova_begin: the minimum address of the allocation
+ * @iova_end: the maximum addressable direction of the allocation
+ *
+ * Allocates a new region of a given size, between iova_min and iova_max.
+ *
+ * Return: Same as iova_tree_insert, but cannot overlap and can return error if
+ * iova tree is out of free contiguous range. The caller gets the assigned iova
+ * in map->iova.
+ */
+int iova_tree_alloc_map(IOVATree *tree, DMAMap *map, hwaddr iova_begin,
+ hwaddr iova_end);
+
/**
* iova_tree_destroy:
*
diff --git a/util/iova-tree.c b/util/iova-tree.c
index 23ea35b7a4..139626b46f 100644
--- a/util/iova-tree.c
+++ b/util/iova-tree.c
@@ -16,6 +16,40 @@ struct IOVATree {
GTree *tree;
};
+/* Args to pass to iova_tree_alloc foreach function. */
+struct IOVATreeAllocArgs {
+ /* Size of the desired allocation */
+ size_t new_size;
+
+ /* The minimum address allowed in the allocation */
+ hwaddr iova_begin;
+
+ /* Map at the left of the hole, can be NULL if "this" is first one */
+ const DMAMap *prev;
+
+ /* Map at the right of the hole, can be NULL if "prev" is the last one */
+ const DMAMap *this;
+
+ /* If found, we fill in the IOVA here */
+ hwaddr iova_result;
+
+ /* Whether have we found a valid IOVA */
+ bool iova_found;
+};
+
+/**
+ * Iterate args to the next hole
+ *
+ * @args: The alloc arguments
+ * @next: The next mapping in the tree. Can be NULL to signal the last one
+ */
+static void iova_tree_alloc_args_iterate(struct IOVATreeAllocArgs *args,
+ const DMAMap *next)
+{
+ args->prev = args->this;
+ args->this = next;
+}
+
static int iova_tree_compare(gconstpointer a, gconstpointer b, gpointer data)
{
const DMAMap *m1 = a, *m2 = b;
@@ -107,6 +141,108 @@ int iova_tree_remove(IOVATree *tree, const DMAMap *map)
return IOVA_OK;
}
+/**
+ * Try to find an unallocated IOVA range between prev and this elements.
+ *
+ * @args: Arguments to allocation
+ *
+ * Cases:
+ *
+ * (1) !prev, !this: No entries allocated, always succeed
+ *
+ * (2) !prev, this: We're iterating at the 1st element.
+ *
+ * (3) prev, !this: We're iterating at the last element.
+ *
+ * (4) prev, this: this is the most common case, we'll try to find a hole
+ * between "prev" and "this" mapping.
+ *
+ * Note that this function assumes the last valid iova is HWADDR_MAX, but it
+ * searches linearly so it's easy to discard the result if it's not the case.
+ */
+static void iova_tree_alloc_map_in_hole(struct IOVATreeAllocArgs *args)
+{
+ const DMAMap *prev = args->prev, *this = args->this;
+ uint64_t hole_start, hole_last;
+
+ if (this && this->iova + this->size < args->iova_begin) {
+ return;
+ }
+
+ hole_start = MAX(prev ? prev->iova + prev->size + 1 : 0, args->iova_begin);
+ hole_last = this ? this->iova : HWADDR_MAX;
+
+ if (hole_last - hole_start > args->new_size) {
+ args->iova_result = hole_start;
+ args->iova_found = true;
+ }
+}
+
+/**
+ * Foreach dma node in the tree, compare if there is a hole with its previous
+ * node (or minimum iova address allowed) and the node.
+ *
+ * @key: Node iterating
+ * @value: Node iterating
+ * @pargs: Struct to communicate with the outside world
+ *
+ * Return: false to keep iterating, true if needs break.
+ */
+static gboolean iova_tree_alloc_traverse(gpointer key, gpointer value,
+ gpointer pargs)
+{
+ struct IOVATreeAllocArgs *args = pargs;
+ DMAMap *node = value;
+
+ assert(key == value);
+
+ iova_tree_alloc_args_iterate(args, node);
+ iova_tree_alloc_map_in_hole(args);
+ return args->iova_found;
+}
+
+int iova_tree_alloc_map(IOVATree *tree, DMAMap *map, hwaddr iova_begin,
+ hwaddr iova_last)
+{
+ struct IOVATreeAllocArgs args = {
+ .new_size = map->size,
+ .iova_begin = iova_begin,
+ };
+
+ if (unlikely(iova_last < iova_begin)) {
+ return IOVA_ERR_INVALID;
+ }
+
+ /*
+ * Find a valid hole for the mapping
+ *
+ * Assuming low iova_begin, so no need to do a binary search to
+ * locate the first node.
+ *
+ * TODO: Replace all this with g_tree_node_first/next/last when available
+ * (from glib since 2.68). To do it with g_tree_foreach complicates the
+ * code a lot.
+ *
+ */
+ g_tree_foreach(tree->tree, iova_tree_alloc_traverse, &args);
+ if (!args.iova_found) {
+ /*
+ * Either tree is empty or the last hole is still not checked.
+ * g_tree_foreach does not compare (last, iova_last] range, so we check
+ * it here.
+ */
+ iova_tree_alloc_args_iterate(&args, NULL);
+ iova_tree_alloc_map_in_hole(&args);
+ }
+
+ if (!args.iova_found || args.iova_result + map->size > iova_last) {
+ return IOVA_ERR_NOMEM;
+ }
+
+ map->iova = args.iova_result;
+ return iova_tree_insert(tree, map);
+}
+
void iova_tree_destroy(IOVATree *tree)
{
g_tree_destroy(tree->tree);
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 09/15] util: add iova_tree_find_iova
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
` (7 preceding siblings ...)
2022-03-14 17:34 ` [PATCH v6 08/15] util: Add iova_tree_alloc_map Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 10/15] vhost: Add VhostIOVATree Eugenio Pérez
` (5 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
This function does the reverse operation of iova_tree_find: To look for
a mapping that match a translated address so we can do the reverse.
This have linear complexity instead of logarithmic, but it supports
overlapping HVA. Future developments could reduce it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
include/qemu/iova-tree.h | 20 +++++++++++++++++++-
util/iova-tree.c | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 53 insertions(+), 1 deletion(-)
diff --git a/include/qemu/iova-tree.h b/include/qemu/iova-tree.h
index d066400f09..c938fb0793 100644
--- a/include/qemu/iova-tree.h
+++ b/include/qemu/iova-tree.h
@@ -83,7 +83,7 @@ int iova_tree_remove(IOVATree *tree, const DMAMap *map);
* @tree: the iova tree to search from
* @map: the mapping to search
*
- * Search for a mapping in the iova tree that overlaps with the
+ * Search for a mapping in the iova tree that iova overlaps with the
* mapping range specified. Only the first found mapping will be
* returned.
*
@@ -95,6 +95,24 @@ int iova_tree_remove(IOVATree *tree, const DMAMap *map);
*/
const DMAMap *iova_tree_find(const IOVATree *tree, const DMAMap *map);
+/**
+ * iova_tree_find_iova:
+ *
+ * @tree: the iova tree to search from
+ * @map: the mapping to search
+ *
+ * Search for a mapping in the iova tree that translated_addr overlaps with the
+ * mapping range specified. Only the first found mapping will be
+ * returned.
+ *
+ * Return: DMAMap pointer if found, or NULL if not found. Note that
+ * the returned DMAMap pointer is maintained internally. User should
+ * only read the content but never modify or free the content. Also,
+ * user is responsible to make sure the pointer is valid (say, no
+ * concurrent deletion in progress).
+ */
+const DMAMap *iova_tree_find_iova(const IOVATree *tree, const DMAMap *map);
+
/**
* iova_tree_find_address:
*
diff --git a/util/iova-tree.c b/util/iova-tree.c
index 139626b46f..6dff29c1f6 100644
--- a/util/iova-tree.c
+++ b/util/iova-tree.c
@@ -37,6 +37,11 @@ struct IOVATreeAllocArgs {
bool iova_found;
};
+typedef struct IOVATreeFindIOVAArgs {
+ const DMAMap *needle;
+ const DMAMap *result;
+} IOVATreeFindIOVAArgs;
+
/**
* Iterate args to the next hole
*
@@ -81,6 +86,35 @@ const DMAMap *iova_tree_find(const IOVATree *tree, const DMAMap *map)
return g_tree_lookup(tree->tree, map);
}
+static gboolean iova_tree_find_address_iterator(gpointer key, gpointer value,
+ gpointer data)
+{
+ const DMAMap *map = key;
+ IOVATreeFindIOVAArgs *args = data;
+ const DMAMap *needle;
+
+ g_assert(key == value);
+
+ needle = args->needle;
+ if (map->translated_addr + map->size < needle->translated_addr ||
+ needle->translated_addr + needle->size < map->translated_addr) {
+ return false;
+ }
+
+ args->result = map;
+ return true;
+}
+
+const DMAMap *iova_tree_find_iova(const IOVATree *tree, const DMAMap *map)
+{
+ IOVATreeFindIOVAArgs args = {
+ .needle = map,
+ };
+
+ g_tree_foreach(tree->tree, iova_tree_find_address_iterator, &args);
+ return args.result;
+}
+
const DMAMap *iova_tree_find_address(const IOVATree *tree, hwaddr iova)
{
const DMAMap map = { .iova = iova, .size = 0 };
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 10/15] vhost: Add VhostIOVATree
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
` (8 preceding siblings ...)
2022-03-14 17:34 ` [PATCH v6 09/15] util: add iova_tree_find_iova Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 11/15] vdpa: Add custom IOTLB translations to SVQ Eugenio Pérez
` (4 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
This tree is able to look for a translated address from an IOVA address.
At first glance it is similar to util/iova-tree. However, SVQ working on
devices with limited IOVA space need more capabilities, like allocating
IOVA chunks or performing reverse translations (qemu addresses to iova).
The allocation capability, as "assign a free IOVA address to this chunk
of memory in qemu's address space" allows shadow virtqueue to create a
new address space that is not restricted by guest's addressable one, so
we can allocate shadow vqs vrings outside of it.
It duplicates the tree so it can search efficiently in both directions,
and it will signal overlap if iova or the translated address is present
in any tree.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
hw/virtio/vhost-iova-tree.h | 27 +++++++++
hw/virtio/vhost-iova-tree.c | 110 ++++++++++++++++++++++++++++++++++++
hw/virtio/meson.build | 2 +-
3 files changed, 138 insertions(+), 1 deletion(-)
create mode 100644 hw/virtio/vhost-iova-tree.h
create mode 100644 hw/virtio/vhost-iova-tree.c
diff --git a/hw/virtio/vhost-iova-tree.h b/hw/virtio/vhost-iova-tree.h
new file mode 100644
index 0000000000..6a4f24e0f9
--- /dev/null
+++ b/hw/virtio/vhost-iova-tree.h
@@ -0,0 +1,27 @@
+/*
+ * vhost software live migration iova tree
+ *
+ * SPDX-FileCopyrightText: Red Hat, Inc. 2021
+ * SPDX-FileContributor: Author: Eugenio Pérez <eperezma@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef HW_VIRTIO_VHOST_IOVA_TREE_H
+#define HW_VIRTIO_VHOST_IOVA_TREE_H
+
+#include "qemu/iova-tree.h"
+#include "exec/memory.h"
+
+typedef struct VhostIOVATree VhostIOVATree;
+
+VhostIOVATree *vhost_iova_tree_new(uint64_t iova_first, uint64_t iova_last);
+void vhost_iova_tree_delete(VhostIOVATree *iova_tree);
+G_DEFINE_AUTOPTR_CLEANUP_FUNC(VhostIOVATree, vhost_iova_tree_delete);
+
+const DMAMap *vhost_iova_tree_find_iova(const VhostIOVATree *iova_tree,
+ const DMAMap *map);
+int vhost_iova_tree_map_alloc(VhostIOVATree *iova_tree, DMAMap *map);
+void vhost_iova_tree_remove(VhostIOVATree *iova_tree, const DMAMap *map);
+
+#endif
diff --git a/hw/virtio/vhost-iova-tree.c b/hw/virtio/vhost-iova-tree.c
new file mode 100644
index 0000000000..55fed1fefb
--- /dev/null
+++ b/hw/virtio/vhost-iova-tree.c
@@ -0,0 +1,110 @@
+/*
+ * vhost software live migration iova tree
+ *
+ * SPDX-FileCopyrightText: Red Hat, Inc. 2021
+ * SPDX-FileContributor: Author: Eugenio Pérez <eperezma@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/iova-tree.h"
+#include "vhost-iova-tree.h"
+
+#define iova_min_addr qemu_real_host_page_size
+
+/**
+ * VhostIOVATree, able to:
+ * - Translate iova address
+ * - Reverse translate iova address (from translated to iova)
+ * - Allocate IOVA regions for translated range (linear operation)
+ */
+struct VhostIOVATree {
+ /* First addressable iova address in the device */
+ uint64_t iova_first;
+
+ /* Last addressable iova address in the device */
+ uint64_t iova_last;
+
+ /* IOVA address to qemu memory maps. */
+ IOVATree *iova_taddr_map;
+};
+
+/**
+ * Create a new IOVA tree
+ *
+ * Returns the new IOVA tree
+ */
+VhostIOVATree *vhost_iova_tree_new(hwaddr iova_first, hwaddr iova_last)
+{
+ VhostIOVATree *tree = g_new(VhostIOVATree, 1);
+
+ /* Some devices do not like 0 addresses */
+ tree->iova_first = MAX(iova_first, iova_min_addr);
+ tree->iova_last = iova_last;
+
+ tree->iova_taddr_map = iova_tree_new();
+ return tree;
+}
+
+/**
+ * Delete an iova tree
+ */
+void vhost_iova_tree_delete(VhostIOVATree *iova_tree)
+{
+ iova_tree_destroy(iova_tree->iova_taddr_map);
+ g_free(iova_tree);
+}
+
+/**
+ * Find the IOVA address stored from a memory address
+ *
+ * @tree: The iova tree
+ * @map: The map with the memory address
+ *
+ * Return the stored mapping, or NULL if not found.
+ */
+const DMAMap *vhost_iova_tree_find_iova(const VhostIOVATree *tree,
+ const DMAMap *map)
+{
+ return iova_tree_find_iova(tree->iova_taddr_map, map);
+}
+
+/**
+ * Allocate a new mapping
+ *
+ * @tree: The iova tree
+ * @map: The iova map
+ *
+ * Returns:
+ * - IOVA_OK if the map fits in the container
+ * - IOVA_ERR_INVALID if the map does not make sense (like size overflow)
+ * - IOVA_ERR_NOMEM if tree cannot allocate more space.
+ *
+ * It returns assignated iova in map->iova if return value is VHOST_DMA_MAP_OK.
+ */
+int vhost_iova_tree_map_alloc(VhostIOVATree *tree, DMAMap *map)
+{
+ /* Some vhost devices do not like addr 0. Skip first page */
+ hwaddr iova_first = tree->iova_first ?: qemu_real_host_page_size;
+
+ if (map->translated_addr + map->size < map->translated_addr ||
+ map->perm == IOMMU_NONE) {
+ return IOVA_ERR_INVALID;
+ }
+
+ /* Allocate a node in IOVA address */
+ return iova_tree_alloc_map(tree->iova_taddr_map, map, iova_first,
+ tree->iova_last);
+}
+
+/**
+ * Remove existing mappings from iova tree
+ *
+ * @iova_tree: The vhost iova tree
+ * @map: The map to remove
+ */
+void vhost_iova_tree_remove(VhostIOVATree *iova_tree, const DMAMap *map)
+{
+ iova_tree_remove(iova_tree->iova_taddr_map, map);
+}
diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
index 2dc87613bc..6047670804 100644
--- a/hw/virtio/meson.build
+++ b/hw/virtio/meson.build
@@ -11,7 +11,7 @@ softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('vhost-stub.c'))
virtio_ss = ss.source_set()
virtio_ss.add(files('virtio.c'))
-virtio_ss.add(when: 'CONFIG_VHOST', if_true: files('vhost.c', 'vhost-backend.c', 'vhost-shadow-virtqueue.c'))
+virtio_ss.add(when: 'CONFIG_VHOST', if_true: files('vhost.c', 'vhost-backend.c', 'vhost-shadow-virtqueue.c', 'vhost-iova-tree.c'))
virtio_ss.add(when: 'CONFIG_VHOST_USER', if_true: files('vhost-user.c'))
virtio_ss.add(when: 'CONFIG_VHOST_VDPA', if_true: files('vhost-vdpa.c'))
virtio_ss.add(when: 'CONFIG_VIRTIO_BALLOON', if_true: files('virtio-balloon.c'))
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 11/15] vdpa: Add custom IOTLB translations to SVQ
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
` (9 preceding siblings ...)
2022-03-14 17:34 ` [PATCH v6 10/15] vhost: Add VhostIOVATree Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 12/15] vdpa: Adapt vhost_vdpa_get_vring_base " Eugenio Pérez
` (3 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
Use translations added in VhostIOVATree in SVQ.
Only introduce usage here, not allocation and deallocation. As with
previous patches, we use the dead code paths of shadow_vqs_enabled to
avoid commiting too many changes at once. These are impossible to take
at the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
hw/virtio/vhost-shadow-virtqueue.h | 6 +-
include/hw/virtio/vhost-vdpa.h | 3 +
hw/virtio/vhost-shadow-virtqueue.c | 86 +++++++++++++++++---
hw/virtio/vhost-vdpa.c | 122 ++++++++++++++++++++++++-----
4 files changed, 187 insertions(+), 30 deletions(-)
diff --git a/hw/virtio/vhost-shadow-virtqueue.h b/hw/virtio/vhost-shadow-virtqueue.h
index 38b3b91ca7..e5e24c536d 100644
--- a/hw/virtio/vhost-shadow-virtqueue.h
+++ b/hw/virtio/vhost-shadow-virtqueue.h
@@ -13,6 +13,7 @@
#include "qemu/event_notifier.h"
#include "hw/virtio/virtio.h"
#include "standard-headers/linux/vhost_types.h"
+#include "hw/virtio/vhost-iova-tree.h"
/* Shadow virtqueue to relay notifications */
typedef struct VhostShadowVirtqueue {
@@ -43,6 +44,9 @@ typedef struct VhostShadowVirtqueue {
/* Virtio device */
VirtIODevice *vdev;
+ /* IOVA mapping */
+ VhostIOVATree *iova_tree;
+
/* Map for use the guest's descriptors */
VirtQueueElement **ring_id_maps;
@@ -75,7 +79,7 @@ void vhost_svq_start(VhostShadowVirtqueue *svq, VirtIODevice *vdev,
VirtQueue *vq);
void vhost_svq_stop(VhostShadowVirtqueue *svq);
-VhostShadowVirtqueue *vhost_svq_new(void);
+VhostShadowVirtqueue *vhost_svq_new(VhostIOVATree *iova_tree);
void vhost_svq_free(gpointer vq);
G_DEFINE_AUTOPTR_CLEANUP_FUNC(VhostShadowVirtqueue, vhost_svq_free);
diff --git a/include/hw/virtio/vhost-vdpa.h b/include/hw/virtio/vhost-vdpa.h
index 009a9f3b6b..ee8e939ad0 100644
--- a/include/hw/virtio/vhost-vdpa.h
+++ b/include/hw/virtio/vhost-vdpa.h
@@ -14,6 +14,7 @@
#include <gmodule.h>
+#include "hw/virtio/vhost-iova-tree.h"
#include "hw/virtio/virtio.h"
#include "standard-headers/linux/vhost_types.h"
@@ -30,6 +31,8 @@ typedef struct vhost_vdpa {
MemoryListener listener;
struct vhost_vdpa_iova_range iova_range;
bool shadow_vqs_enabled;
+ /* IOVA mapping used by the Shadow Virtqueue */
+ VhostIOVATree *iova_tree;
GPtrArray *shadow_vqs;
struct vhost_dev *dev;
VhostVDPAHostNotifier notifier[VIRTIO_QUEUE_MAX];
diff --git a/hw/virtio/vhost-shadow-virtqueue.c b/hw/virtio/vhost-shadow-virtqueue.c
index ece50b8ece..b232803d1b 100644
--- a/hw/virtio/vhost-shadow-virtqueue.c
+++ b/hw/virtio/vhost-shadow-virtqueue.c
@@ -70,7 +70,59 @@ static uint16_t vhost_svq_available_slots(const VhostShadowVirtqueue *svq)
return svq->vring.num - (svq->shadow_avail_idx - svq->shadow_used_idx);
}
-static void vhost_vring_write_descs(VhostShadowVirtqueue *svq,
+/**
+ * Translate addresses between the qemu's virtual address and the SVQ IOVA
+ *
+ * @svq: Shadow VirtQueue
+ * @vaddr: Translated IOVA addresses
+ * @iovec: Source qemu's VA addresses
+ * @num: Length of iovec and minimum length of vaddr
+ */
+static bool vhost_svq_translate_addr(const VhostShadowVirtqueue *svq,
+ hwaddr *addrs, const struct iovec *iovec,
+ size_t num)
+{
+ if (num == 0) {
+ return true;
+ }
+
+ for (size_t i = 0; i < num; ++i) {
+ DMAMap needle = {
+ .translated_addr = (hwaddr)(uintptr_t)iovec[i].iov_base,
+ .size = iovec[i].iov_len,
+ };
+ Int128 needle_last, map_last;
+ size_t off;
+
+ const DMAMap *map = vhost_iova_tree_find_iova(svq->iova_tree, &needle);
+ /*
+ * Map cannot be NULL since iova map contains all guest space and
+ * qemu already has a physical address mapped
+ */
+ if (unlikely(!map)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "Invalid address 0x%"HWADDR_PRIx" given by guest",
+ needle.translated_addr);
+ return false;
+ }
+
+ off = needle.translated_addr - map->translated_addr;
+ addrs[i] = map->iova + off;
+
+ needle_last = int128_add(int128_make64(needle.translated_addr),
+ int128_make64(iovec[i].iov_len));
+ map_last = int128_make64(map->translated_addr + map->size);
+ if (unlikely(int128_gt(needle_last, map_last))) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "Guest buffer expands over iova range");
+ return false;
+ }
+ }
+
+ return true;
+}
+
+static void vhost_vring_write_descs(VhostShadowVirtqueue *svq, hwaddr *sg,
const struct iovec *iovec, size_t num,
bool more_descs, bool write)
{
@@ -89,7 +141,7 @@ static void vhost_vring_write_descs(VhostShadowVirtqueue *svq,
} else {
descs[i].flags = flags;
}
- descs[i].addr = cpu_to_le64((hwaddr)(intptr_t)iovec[n].iov_base);
+ descs[i].addr = cpu_to_le64(sg[n]);
descs[i].len = cpu_to_le32(iovec[n].iov_len);
last = i;
@@ -104,6 +156,8 @@ static bool vhost_svq_add_split(VhostShadowVirtqueue *svq,
{
unsigned avail_idx;
vring_avail_t *avail = svq->vring.avail;
+ bool ok;
+ g_autofree hwaddr *sgs = g_new(hwaddr, MAX(elem->out_num, elem->in_num));
*head = svq->free_head;
@@ -114,9 +168,20 @@ static bool vhost_svq_add_split(VhostShadowVirtqueue *svq,
return false;
}
- vhost_vring_write_descs(svq, elem->out_sg, elem->out_num, elem->in_num > 0,
- false);
- vhost_vring_write_descs(svq, elem->in_sg, elem->in_num, false, true);
+ ok = vhost_svq_translate_addr(svq, sgs, elem->out_sg, elem->out_num);
+ if (unlikely(!ok)) {
+ return false;
+ }
+ vhost_vring_write_descs(svq, sgs, elem->out_sg, elem->out_num,
+ elem->in_num > 0, false);
+
+
+ ok = vhost_svq_translate_addr(svq, sgs, elem->in_sg, elem->in_num);
+ if (unlikely(!ok)) {
+ return false;
+ }
+
+ vhost_vring_write_descs(svq, sgs, elem->in_sg, elem->in_num, false, true);
/*
* Put the entry in the available array (but don't update avail->idx until
@@ -395,9 +460,9 @@ void vhost_svq_set_svq_call_fd(VhostShadowVirtqueue *svq, int call_fd)
void vhost_svq_get_vring_addr(const VhostShadowVirtqueue *svq,
struct vhost_vring_addr *addr)
{
- addr->desc_user_addr = (uint64_t)(intptr_t)svq->vring.desc;
- addr->avail_user_addr = (uint64_t)(intptr_t)svq->vring.avail;
- addr->used_user_addr = (uint64_t)(intptr_t)svq->vring.used;
+ addr->desc_user_addr = (uint64_t)(uintptr_t)svq->vring.desc;
+ addr->avail_user_addr = (uint64_t)(uintptr_t)svq->vring.avail;
+ addr->used_user_addr = (uint64_t)(uintptr_t)svq->vring.used;
}
size_t vhost_svq_driver_area_size(const VhostShadowVirtqueue *svq)
@@ -518,11 +583,13 @@ void vhost_svq_stop(VhostShadowVirtqueue *svq)
* Creates vhost shadow virtqueue, and instructs the vhost device to use the
* shadow methods and file descriptors.
*
+ * @iova_tree: Tree to perform descriptors translations
+ *
* Returns the new virtqueue or NULL.
*
* In case of error, reason is reported through error_report.
*/
-VhostShadowVirtqueue *vhost_svq_new(void)
+VhostShadowVirtqueue *vhost_svq_new(VhostIOVATree *iova_tree)
{
g_autofree VhostShadowVirtqueue *svq = g_new0(VhostShadowVirtqueue, 1);
int r;
@@ -543,6 +610,7 @@ VhostShadowVirtqueue *vhost_svq_new(void)
event_notifier_init_fd(&svq->svq_kick, VHOST_FILE_UNBIND);
event_notifier_set_handler(&svq->hdev_call, vhost_svq_handle_call);
+ svq->iova_tree = iova_tree;
return g_steal_pointer(&svq);
err_init_hdev_call:
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index 297505f331..ec38189492 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -209,6 +209,21 @@ static void vhost_vdpa_listener_region_add(MemoryListener *listener,
vaddr, section->readonly);
llsize = int128_sub(llend, int128_make64(iova));
+ if (v->shadow_vqs_enabled) {
+ DMAMap mem_region = {
+ .translated_addr = (hwaddr)(uintptr_t)vaddr,
+ .size = int128_get64(llsize) - 1,
+ .perm = IOMMU_ACCESS_FLAG(true, section->readonly),
+ };
+
+ int r = vhost_iova_tree_map_alloc(v->iova_tree, &mem_region);
+ if (unlikely(r != IOVA_OK)) {
+ error_report("Can't allocate a mapping (%d)", r);
+ goto fail;
+ }
+
+ iova = mem_region.iova;
+ }
vhost_vdpa_iotlb_batch_begin_once(v);
ret = vhost_vdpa_dma_map(v, iova, int128_get64(llsize),
@@ -261,6 +276,20 @@ static void vhost_vdpa_listener_region_del(MemoryListener *listener,
llsize = int128_sub(llend, int128_make64(iova));
+ if (v->shadow_vqs_enabled) {
+ const DMAMap *result;
+ const void *vaddr = memory_region_get_ram_ptr(section->mr) +
+ section->offset_within_region +
+ (iova - section->offset_within_address_space);
+ DMAMap mem_region = {
+ .translated_addr = (hwaddr)(uintptr_t)vaddr,
+ .size = int128_get64(llsize) - 1,
+ };
+
+ result = vhost_iova_tree_find_iova(v->iova_tree, &mem_region);
+ iova = result->iova;
+ vhost_iova_tree_remove(v->iova_tree, &mem_region);
+ }
vhost_vdpa_iotlb_batch_begin_once(v);
ret = vhost_vdpa_dma_unmap(v, iova, int128_get64(llsize));
if (ret) {
@@ -370,7 +399,7 @@ static int vhost_vdpa_init_svq(struct vhost_dev *hdev, struct vhost_vdpa *v,
shadow_vqs = g_ptr_array_new_full(hdev->nvqs, vhost_svq_free);
for (unsigned n = 0; n < hdev->nvqs; ++n) {
- g_autoptr(VhostShadowVirtqueue) svq = vhost_svq_new();
+ g_autoptr(VhostShadowVirtqueue) svq = vhost_svq_new(v->iova_tree);
if (unlikely(!svq)) {
error_setg(errp, "Cannot create svq %u", n);
@@ -807,33 +836,70 @@ static int vhost_vdpa_svq_set_fds(struct vhost_dev *dev,
/**
* Unmap a SVQ area in the device
*/
-static bool vhost_vdpa_svq_unmap_ring(struct vhost_vdpa *v, hwaddr iova,
- hwaddr size)
+static bool vhost_vdpa_svq_unmap_ring(struct vhost_vdpa *v,
+ const DMAMap *needle)
{
+ const DMAMap *result = vhost_iova_tree_find_iova(v->iova_tree, needle);
+ hwaddr size;
int r;
- size = ROUND_UP(size, qemu_real_host_page_size);
- r = vhost_vdpa_dma_unmap(v, iova, size);
+ if (unlikely(!result)) {
+ error_report("Unable to find SVQ address to unmap");
+ return false;
+ }
+
+ size = ROUND_UP(result->size, qemu_real_host_page_size);
+ r = vhost_vdpa_dma_unmap(v, result->iova, size);
return r == 0;
}
static bool vhost_vdpa_svq_unmap_rings(struct vhost_dev *dev,
const VhostShadowVirtqueue *svq)
{
+ DMAMap needle = {};
struct vhost_vdpa *v = dev->opaque;
struct vhost_vring_addr svq_addr;
- size_t device_size = vhost_svq_device_area_size(svq);
- size_t driver_size = vhost_svq_driver_area_size(svq);
bool ok;
vhost_svq_get_vring_addr(svq, &svq_addr);
- ok = vhost_vdpa_svq_unmap_ring(v, svq_addr.desc_user_addr, driver_size);
+ needle.translated_addr = svq_addr.desc_user_addr;
+ ok = vhost_vdpa_svq_unmap_ring(v, &needle);
if (unlikely(!ok)) {
return false;
}
- return vhost_vdpa_svq_unmap_ring(v, svq_addr.used_user_addr, device_size);
+ needle.translated_addr = svq_addr.used_user_addr;
+ return vhost_vdpa_svq_unmap_ring(v, &needle);
+}
+
+/**
+ * Map the SVQ area in the device
+ *
+ * @v: Vhost-vdpa device
+ * @needle: The area to search iova
+ * @errorp: Error pointer
+ */
+static bool vhost_vdpa_svq_map_ring(struct vhost_vdpa *v, DMAMap *needle,
+ Error **errp)
+{
+ int r;
+
+ r = vhost_iova_tree_map_alloc(v->iova_tree, needle);
+ if (unlikely(r != IOVA_OK)) {
+ error_setg(errp, "Cannot allocate iova (%d)", r);
+ return false;
+ }
+
+ r = vhost_vdpa_dma_map(v, needle->iova, needle->size + 1,
+ (void *)(uintptr_t)needle->translated_addr,
+ needle->perm == IOMMU_RO);
+ if (unlikely(r != 0)) {
+ error_setg_errno(errp, -r, "Cannot map region to device");
+ vhost_iova_tree_remove(v->iova_tree, needle);
+ }
+
+ return r == 0;
}
/**
@@ -849,28 +915,44 @@ static bool vhost_vdpa_svq_map_rings(struct vhost_dev *dev,
struct vhost_vring_addr *addr,
Error **errp)
{
+ DMAMap device_region, driver_region;
+ struct vhost_vring_addr svq_addr;
struct vhost_vdpa *v = dev->opaque;
size_t device_size = vhost_svq_device_area_size(svq);
size_t driver_size = vhost_svq_driver_area_size(svq);
- int r;
+ size_t avail_offset;
+ bool ok;
ERRP_GUARD();
- vhost_svq_get_vring_addr(svq, addr);
+ vhost_svq_get_vring_addr(svq, &svq_addr);
- r = vhost_vdpa_dma_map(v, addr->desc_user_addr, driver_size,
- (void *)(uintptr_t)addr->desc_user_addr, true);
- if (unlikely(r != 0)) {
- error_setg_errno(errp, -r, "Cannot create vq driver region: ");
+ driver_region = (DMAMap) {
+ .translated_addr = svq_addr.desc_user_addr,
+ .size = driver_size - 1,
+ .perm = IOMMU_RO,
+ };
+ ok = vhost_vdpa_svq_map_ring(v, &driver_region, errp);
+ if (unlikely(!ok)) {
+ error_prepend(errp, "Cannot create vq driver region: ");
return false;
}
+ addr->desc_user_addr = driver_region.iova;
+ avail_offset = svq_addr.avail_user_addr - svq_addr.desc_user_addr;
+ addr->avail_user_addr = driver_region.iova + avail_offset;
- r = vhost_vdpa_dma_map(v, addr->used_user_addr, device_size,
- (void *)(intptr_t)addr->used_user_addr, false);
- if (unlikely(r != 0)) {
- error_setg_errno(errp, -r, "Cannot create vq device region: ");
+ device_region = (DMAMap) {
+ .translated_addr = svq_addr.used_user_addr,
+ .size = device_size - 1,
+ .perm = IOMMU_RW,
+ };
+ ok = vhost_vdpa_svq_map_ring(v, &device_region, errp);
+ if (unlikely(!ok)) {
+ error_prepend(errp, "Cannot create vq device region: ");
+ vhost_vdpa_svq_unmap_ring(v, &driver_region);
}
+ addr->used_user_addr = device_region.iova;
- return r == 0;
+ return ok;
}
static bool vhost_vdpa_svq_setup(struct vhost_dev *dev,
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 12/15] vdpa: Adapt vhost_vdpa_get_vring_base to SVQ
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
` (10 preceding siblings ...)
2022-03-14 17:34 ` [PATCH v6 11/15] vdpa: Add custom IOTLB translations to SVQ Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 13/15] vdpa: Never set log_base addr if SVQ is enabled Eugenio Pérez
` (2 subsequent siblings)
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
This is needed to achieve migration, so the destination can restore its
index.
Setting base as last used idx, so destination will see as available all
the entries that the device did not use, including the in-flight
processing ones.
This is ok for networking, but other kinds of devices might have
problems with these retransmissions.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
hw/virtio/vhost-vdpa.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index ec38189492..93dbe1043c 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -1141,8 +1141,25 @@ static int vhost_vdpa_set_vring_base(struct vhost_dev *dev,
static int vhost_vdpa_get_vring_base(struct vhost_dev *dev,
struct vhost_vring_state *ring)
{
+ struct vhost_vdpa *v = dev->opaque;
int ret;
+ if (v->shadow_vqs_enabled) {
+ VhostShadowVirtqueue *svq = g_ptr_array_index(v->shadow_vqs,
+ ring->index);
+
+ /*
+ * Setting base as last used idx, so destination will see as available
+ * all the entries that the device did not use, including the in-flight
+ * processing ones.
+ *
+ * TODO: This is ok for networking, but other kinds of devices might
+ * have problems with these retransmissions.
+ */
+ ring->num = svq->last_used_idx;
+ return 0;
+ }
+
ret = vhost_vdpa_call(dev, VHOST_GET_VRING_BASE, ring);
trace_vhost_vdpa_get_vring_base(dev, ring->index, ring->num);
return ret;
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 13/15] vdpa: Never set log_base addr if SVQ is enabled
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
` (11 preceding siblings ...)
2022-03-14 17:34 ` [PATCH v6 12/15] vdpa: Adapt vhost_vdpa_get_vring_base " Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 14/15] vdpa: Expose VHOST_F_LOG_ALL on SVQ Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 15/15] vdpa: Add x-svq to NetdevVhostVDPAOptions Eugenio Pérez
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
Setting the log address would make the device start reporting invalid
dirty memory because the SVQ vrings are located in qemu's memory.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
hw/virtio/vhost-vdpa.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index 93dbe1043c..89d59f86f9 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -1090,7 +1090,8 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
static int vhost_vdpa_set_log_base(struct vhost_dev *dev, uint64_t base,
struct vhost_log *log)
{
- if (vhost_vdpa_one_time_request(dev)) {
+ struct vhost_vdpa *v = dev->opaque;
+ if (v->shadow_vqs_enabled || vhost_vdpa_one_time_request(dev)) {
return 0;
}
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 14/15] vdpa: Expose VHOST_F_LOG_ALL on SVQ
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
` (12 preceding siblings ...)
2022-03-14 17:34 ` [PATCH v6 13/15] vdpa: Never set log_base addr if SVQ is enabled Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 15/15] vdpa: Add x-svq to NetdevVhostVDPAOptions Eugenio Pérez
14 siblings, 0 replies; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
SVQ is able to log the dirty bits by itself, so let's use it to not
block migration.
Also, ignore set and clear of VHOST_F_LOG_ALL on set_features if SVQ is
enabled. Even if the device supports it, the reports would be nonsense
because SVQ memory is in the qemu region.
The log region is still allocated. Future changes might skip that, but
this series is already long enough.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
include/hw/virtio/vhost-vdpa.h | 1 +
hw/virtio/vhost-vdpa.c | 39 ++++++++++++++++++++++++++++++----
2 files changed, 36 insertions(+), 4 deletions(-)
diff --git a/include/hw/virtio/vhost-vdpa.h b/include/hw/virtio/vhost-vdpa.h
index ee8e939ad0..a29dbb3f53 100644
--- a/include/hw/virtio/vhost-vdpa.h
+++ b/include/hw/virtio/vhost-vdpa.h
@@ -30,6 +30,7 @@ typedef struct vhost_vdpa {
bool iotlb_batch_begin_sent;
MemoryListener listener;
struct vhost_vdpa_iova_range iova_range;
+ uint64_t acked_features;
bool shadow_vqs_enabled;
/* IOVA mapping used by the Shadow Virtqueue */
VhostIOVATree *iova_tree;
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index 89d59f86f9..c5ed7a3779 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -373,6 +373,16 @@ static bool vhost_vdpa_one_time_request(struct vhost_dev *dev)
return v->index != 0;
}
+static int vhost_vdpa_get_dev_features(struct vhost_dev *dev,
+ uint64_t *features)
+{
+ int ret;
+
+ ret = vhost_vdpa_call(dev, VHOST_GET_FEATURES, features);
+ trace_vhost_vdpa_get_features(dev, *features);
+ return ret;
+}
+
static int vhost_vdpa_init_svq(struct vhost_dev *hdev, struct vhost_vdpa *v,
Error **errp)
{
@@ -385,7 +395,7 @@ static int vhost_vdpa_init_svq(struct vhost_dev *hdev, struct vhost_vdpa *v,
return 0;
}
- r = hdev->vhost_ops->vhost_get_features(hdev, &dev_features);
+ r = vhost_vdpa_get_dev_features(hdev, &dev_features);
if (r != 0) {
error_setg_errno(errp, -r, "Can't get vdpa device features");
return r;
@@ -610,12 +620,29 @@ static int vhost_vdpa_set_mem_table(struct vhost_dev *dev,
static int vhost_vdpa_set_features(struct vhost_dev *dev,
uint64_t features)
{
+ struct vhost_vdpa *v = dev->opaque;
int ret;
if (vhost_vdpa_one_time_request(dev)) {
return 0;
}
+ if (v->shadow_vqs_enabled) {
+ if ((v->acked_features ^ features) == BIT_ULL(VHOST_F_LOG_ALL)) {
+ /*
+ * QEMU is just trying to enable or disable logging. SVQ handles
+ * this sepparately, so no need to forward this.
+ */
+ v->acked_features = features;
+ return 0;
+ }
+
+ v->acked_features = features;
+
+ /* We must not ack _F_LOG if SVQ is enabled */
+ features &= ~BIT_ULL(VHOST_F_LOG_ALL);
+ }
+
trace_vhost_vdpa_set_features(dev, features);
ret = vhost_vdpa_call(dev, VHOST_SET_FEATURES, &features);
if (ret) {
@@ -1200,10 +1227,14 @@ static int vhost_vdpa_set_vring_call(struct vhost_dev *dev,
static int vhost_vdpa_get_features(struct vhost_dev *dev,
uint64_t *features)
{
- int ret;
+ struct vhost_vdpa *v = dev->opaque;
+ int ret = vhost_vdpa_get_dev_features(dev, features);
+
+ if (ret == 0 && v->shadow_vqs_enabled) {
+ /* Add SVQ logging capabilities */
+ *features |= BIT_ULL(VHOST_F_LOG_ALL);
+ }
- ret = vhost_vdpa_call(dev, VHOST_GET_FEATURES, features);
- trace_vhost_vdpa_get_features(dev, *features);
return ret;
}
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 15/15] vdpa: Add x-svq to NetdevVhostVDPAOptions
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
` (13 preceding siblings ...)
2022-03-14 17:34 ` [PATCH v6 14/15] vdpa: Expose VHOST_F_LOG_ALL on SVQ Eugenio Pérez
@ 2022-03-14 17:34 ` Eugenio Pérez
2022-03-14 18:13 ` Eugenio Perez Martin
14 siblings, 1 reply; 17+ messages in thread
From: Eugenio Pérez @ 2022-03-14 17:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Jason Wang
Finally offering the possibility to enable SVQ from the command line.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
qapi/net.json | 8 +++++++-
net/vhost-vdpa.c | 48 ++++++++++++++++++++++++++++++++++++++++--------
2 files changed, 47 insertions(+), 9 deletions(-)
diff --git a/qapi/net.json b/qapi/net.json
index 7fab2e7cd8..271dfa7708 100644
--- a/qapi/net.json
+++ b/qapi/net.json
@@ -445,12 +445,18 @@
# @queues: number of queues to be created for multiqueue vhost-vdpa
# (default: 1)
#
+# @x-svq: Start device with (experimental) shadow virtqueue. (Since 7.1)
+#
+# Features:
+# @unstable: Member @x-svq is experimental.
+#
# Since: 5.1
##
{ 'struct': 'NetdevVhostVDPAOptions',
'data': {
'*vhostdev': 'str',
- '*queues': 'int' } }
+ '*queues': 'int',
+ '*x-svq': {'type': 'bool', 'features' : [ 'unstable'] } } }
##
# @NetClientDriver:
diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c
index 1e9fe47c03..def738998b 100644
--- a/net/vhost-vdpa.c
+++ b/net/vhost-vdpa.c
@@ -127,7 +127,11 @@ err_init:
static void vhost_vdpa_cleanup(NetClientState *nc)
{
VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
+ struct vhost_dev *dev = s->vhost_vdpa.dev;
+ if (dev && dev->vq_index + dev->nvqs == dev->vq_index_end) {
+ g_clear_pointer(&s->vhost_vdpa.iova_tree, vhost_iova_tree_delete);
+ }
if (s->vhost_net) {
vhost_net_cleanup(s->vhost_net);
g_free(s->vhost_net);
@@ -187,13 +191,23 @@ static NetClientInfo net_vhost_vdpa_info = {
.check_peer_type = vhost_vdpa_check_peer_type,
};
+static int vhost_vdpa_get_iova_range(int fd,
+ struct vhost_vdpa_iova_range *iova_range)
+{
+ int ret = ioctl(fd, VHOST_VDPA_GET_IOVA_RANGE, iova_range);
+
+ return ret < 0 ? -errno : 0;
+}
+
static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
- const char *device,
- const char *name,
- int vdpa_device_fd,
- int queue_pair_index,
- int nvqs,
- bool is_datapath)
+ const char *device,
+ const char *name,
+ int vdpa_device_fd,
+ int queue_pair_index,
+ int nvqs,
+ bool is_datapath,
+ bool svq,
+ VhostIOVATree *iova_tree)
{
NetClientState *nc = NULL;
VhostVDPAState *s;
@@ -211,6 +225,8 @@ static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
s->vhost_vdpa.device_fd = vdpa_device_fd;
s->vhost_vdpa.index = queue_pair_index;
+ s->vhost_vdpa.shadow_vqs_enabled = svq;
+ s->vhost_vdpa.iova_tree = iova_tree;
ret = vhost_vdpa_add(nc, (void *)&s->vhost_vdpa, queue_pair_index, nvqs);
if (ret) {
qemu_del_net_client(nc);
@@ -266,6 +282,7 @@ int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
g_autofree NetClientState **ncs = NULL;
NetClientState *nc;
int queue_pairs, i, has_cvq = 0;
+ g_autoptr(VhostIOVATree) iova_tree = NULL;
assert(netdev->type == NET_CLIENT_DRIVER_VHOST_VDPA);
opts = &netdev->u.vhost_vdpa;
@@ -285,29 +302,44 @@ int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
qemu_close(vdpa_device_fd);
return queue_pairs;
}
+ if (opts->x_svq) {
+ struct vhost_vdpa_iova_range iova_range;
+
+ if (has_cvq) {
+ error_setg(errp, "vdpa svq does not work with cvq");
+ goto err_svq;
+ }
+ vhost_vdpa_get_iova_range(vdpa_device_fd, &iova_range);
+ iova_tree = vhost_iova_tree_new(iova_range.first, iova_range.last);
+ }
ncs = g_malloc0(sizeof(*ncs) * queue_pairs);
for (i = 0; i < queue_pairs; i++) {
ncs[i] = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name,
- vdpa_device_fd, i, 2, true);
+ vdpa_device_fd, i, 2, true, opts->x_svq,
+ iova_tree);
if (!ncs[i])
goto err;
}
if (has_cvq) {
nc = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name,
- vdpa_device_fd, i, 1, false);
+ vdpa_device_fd, i, 1, false, opts->x_svq,
+ iova_tree);
if (!nc)
goto err;
}
+ iova_tree = NULL;
return 0;
err:
if (i) {
qemu_del_net_client(ncs[0]);
}
+
+err_svq:
qemu_close(vdpa_device_fd);
return -1;
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v6 15/15] vdpa: Add x-svq to NetdevVhostVDPAOptions
2022-03-14 17:34 ` [PATCH v6 15/15] vdpa: Add x-svq to NetdevVhostVDPAOptions Eugenio Pérez
@ 2022-03-14 18:13 ` Eugenio Perez Martin
0 siblings, 0 replies; 17+ messages in thread
From: Eugenio Perez Martin @ 2022-03-14 18:13 UTC (permalink / raw)
To: qemu-level; +Cc: Jason Wang
On Mon, Mar 14, 2022 at 6:50 PM Eugenio Pérez <eperezma@redhat.com> wrote:
>
> Finally offering the possibility to enable SVQ from the command line.
>
> Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
> ---
> qapi/net.json | 8 +++++++-
> net/vhost-vdpa.c | 48 ++++++++++++++++++++++++++++++++++++++++--------
> 2 files changed, 47 insertions(+), 9 deletions(-)
>
> diff --git a/qapi/net.json b/qapi/net.json
> index 7fab2e7cd8..271dfa7708 100644
> --- a/qapi/net.json
> +++ b/qapi/net.json
> @@ -445,12 +445,18 @@
> # @queues: number of queues to be created for multiqueue vhost-vdpa
> # (default: 1)
> #
> +# @x-svq: Start device with (experimental) shadow virtqueue. (Since 7.1)
> +#
> +# Features:
> +# @unstable: Member @x-svq is experimental.
> +#
> # Since: 5.1
> ##
> { 'struct': 'NetdevVhostVDPAOptions',
> 'data': {
> '*vhostdev': 'str',
> - '*queues': 'int' } }
> + '*queues': 'int',
> + '*x-svq': {'type': 'bool', 'features' : [ 'unstable'] } } }
>
> ##
> # @NetClientDriver:
> diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c
> index 1e9fe47c03..def738998b 100644
> --- a/net/vhost-vdpa.c
> +++ b/net/vhost-vdpa.c
> @@ -127,7 +127,11 @@ err_init:
> static void vhost_vdpa_cleanup(NetClientState *nc)
> {
> VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
> + struct vhost_dev *dev = s->vhost_vdpa.dev;
>
> + if (dev && dev->vq_index + dev->nvqs == dev->vq_index_end) {
> + g_clear_pointer(&s->vhost_vdpa.iova_tree, vhost_iova_tree_delete);
> + }
> if (s->vhost_net) {
> vhost_net_cleanup(s->vhost_net);
> g_free(s->vhost_net);
> @@ -187,13 +191,23 @@ static NetClientInfo net_vhost_vdpa_info = {
> .check_peer_type = vhost_vdpa_check_peer_type,
> };
>
> +static int vhost_vdpa_get_iova_range(int fd,
> + struct vhost_vdpa_iova_range *iova_range)
> +{
> + int ret = ioctl(fd, VHOST_VDPA_GET_IOVA_RANGE, iova_range);
> +
> + return ret < 0 ? -errno : 0;
> +}
> +
> static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
> - const char *device,
> - const char *name,
> - int vdpa_device_fd,
> - int queue_pair_index,
> - int nvqs,
> - bool is_datapath)
> + const char *device,
> + const char *name,
> + int vdpa_device_fd,
> + int queue_pair_index,
> + int nvqs,
> + bool is_datapath,
> + bool svq,
> + VhostIOVATree *iova_tree)
> {
> NetClientState *nc = NULL;
> VhostVDPAState *s;
> @@ -211,6 +225,8 @@ static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
>
> s->vhost_vdpa.device_fd = vdpa_device_fd;
> s->vhost_vdpa.index = queue_pair_index;
> + s->vhost_vdpa.shadow_vqs_enabled = svq;
> + s->vhost_vdpa.iova_tree = iova_tree;
> ret = vhost_vdpa_add(nc, (void *)&s->vhost_vdpa, queue_pair_index, nvqs);
> if (ret) {
> qemu_del_net_client(nc);
> @@ -266,6 +282,7 @@ int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
> g_autofree NetClientState **ncs = NULL;
> NetClientState *nc;
> int queue_pairs, i, has_cvq = 0;
> + g_autoptr(VhostIOVATree) iova_tree = NULL;
>
> assert(netdev->type == NET_CLIENT_DRIVER_VHOST_VDPA);
> opts = &netdev->u.vhost_vdpa;
> @@ -285,29 +302,44 @@ int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
> qemu_close(vdpa_device_fd);
> return queue_pairs;
> }
> + if (opts->x_svq) {
> + struct vhost_vdpa_iova_range iova_range;
> +
> + if (has_cvq) {
> + error_setg(errp, "vdpa svq does not work with cvq");
> + goto err_svq;
> + }
> + vhost_vdpa_get_iova_range(vdpa_device_fd, &iova_range);
> + iova_tree = vhost_iova_tree_new(iova_range.first, iova_range.last);
> + }
>
> ncs = g_malloc0(sizeof(*ncs) * queue_pairs);
>
> for (i = 0; i < queue_pairs; i++) {
> ncs[i] = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name,
> - vdpa_device_fd, i, 2, true);
> + vdpa_device_fd, i, 2, true, opts->x_svq,
> + iova_tree);
> if (!ncs[i])
> goto err;
> }
>
> if (has_cvq) {
> nc = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name,
> - vdpa_device_fd, i, 1, false);
> + vdpa_device_fd, i, 1, false, opts->x_svq,
> + iova_tree);
> if (!nc)
> goto err;
> }
>
> + iova_tree = NULL;
> return 0;
>
> err:
> if (i) {
> qemu_del_net_client(ncs[0]);
> }
> +
> +err_svq:
> qemu_close(vdpa_device_fd);
>
> return -1;
> --
> 2.27.0
>
>
Sorry, I added this last one by mistake. Do I need to resend the
series to delete it?
Thanks!
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2022-03-14 18:18 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-14 17:34 [PATCH v6 00/15] vDPA shadow virtqueue Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 01/15] vhost: Add VhostShadowVirtqueue Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 02/15] vhost: Add Shadow VirtQueue kick forwarding capabilities Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 03/15] vhost: Add Shadow VirtQueue call " Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 04/15] vhost: Add vhost_svq_valid_features to shadow vq Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 05/15] virtio: Add vhost_svq_get_vring_addr Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 06/15] vdpa: adapt vhost_ops callbacks to svq Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 07/15] vhost: Shadow virtqueue buffers forwarding Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 08/15] util: Add iova_tree_alloc_map Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 09/15] util: add iova_tree_find_iova Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 10/15] vhost: Add VhostIOVATree Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 11/15] vdpa: Add custom IOTLB translations to SVQ Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 12/15] vdpa: Adapt vhost_vdpa_get_vring_base " Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 13/15] vdpa: Never set log_base addr if SVQ is enabled Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 14/15] vdpa: Expose VHOST_F_LOG_ALL on SVQ Eugenio Pérez
2022-03-14 17:34 ` [PATCH v6 15/15] vdpa: Add x-svq to NetdevVhostVDPAOptions Eugenio Pérez
2022-03-14 18:13 ` Eugenio Perez Martin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.