From: Arnd Bergmann <arnd@kernel.org>
To: linux-omap@vger.kernel.org, tony@atomide.com,
aaro.koskinen@iki.fi, jmkrzyszt@gmail.com
Cc: Arnd Bergmann <arnd@arndb.de>,
Russell King <linux@armlinux.org.uk>,
Paul Walmsley <paul@pwsan.com>, Kevin Hilman <khilman@kernel.org>,
Peter Ujfalusi <peter.ujfalusi@gmail.com>,
Vinod Koul <vkoul@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Dominik Brodowski <linux@dominikbrodowski.net>,
Mark Brown <broonie@kernel.org>, Felipe Balbi <balbi@kernel.org>,
Alan Stern <stern@rowland.harvard.edu>,
Lee Jones <lee.jones@linaro.org>,
Daniel Thompson <daniel.thompson@linaro.org>,
Jingoo Han <jingoohan1@gmail.com>, Helge Deller <deller@gmx.de>,
Linus Walleij <linus.walleij@linaro.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
dmaengine@vger.kernel.org, linux-input@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-serial@vger.kernel.org,
dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org,
alsa-devel@alsa-project.org,
Felipe Balbi <felipe.balbi@linux.intel.com>
Subject: [PATCH 07/41] ARM: omap1: move mach/usb.h to include/linux/soc
Date: Tue, 19 Apr 2022 15:36:49 +0200 [thread overview]
Message-ID: <20220419133723.1394715-8-arnd@kernel.org> (raw)
In-Reply-To: <20220419133723.1394715-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
The register definitions in this header are used in at least four
different places, with little hope of completely cleaning that up.
Split up the file into a portion that becomes a linux-wide header
under include/linux/soc/ti/, and the parts that are actually only
needed by board files.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-omap1/board-ams-delta.c | 2 +-
arch/arm/mach-omap1/board-generic.c | 2 +-
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-h3.c | 2 +-
arch/arm/mach-omap1/board-htcherald.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/board-nokia770.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
arch/arm/mach-omap1/board-palmte.c | 2 +-
arch/arm/mach-omap1/board-palmtt.c | 2 +-
arch/arm/mach-omap1/board-palmz71.c | 2 +-
arch/arm/mach-omap1/board-sx1.c | 2 +-
arch/arm/mach-omap1/clock_data.c | 2 +-
arch/arm/mach-omap1/usb.c | 2 +-
arch/arm/mach-omap1/usb.h | 25 +++++++++++++++++
drivers/usb/gadget/udc/omap_udc.c | 3 +-
drivers/usb/host/ohci-omap.c | 4 +--
drivers/usb/phy/phy-isp1301-omap.c | 2 +-
.../usb.h => include/linux/soc/ti/omap1-usb.h | 28 ++++++-------------
19 files changed, 52 insertions(+), 38 deletions(-)
create mode 100644 arch/arm/mach-omap1/usb.h
rename arch/arm/mach-omap1/include/mach/usb.h => include/linux/soc/ti/omap1-usb.h (86%)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 12d61ad98395..5b0e99319990 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -38,7 +38,7 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "ams-delta-fiq.h"
#include "board-ams-delta.h"
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c62554990115..8ef0a9b17e92 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -21,7 +21,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 977b0b744c22..b8cf0d84f8ab 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -42,7 +42,7 @@
#include "flash.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4249984f9c30..86260498c344 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -45,7 +45,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 258304edf23e..f7220b60eb61 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -31,7 +31,7 @@
#include "mmc.h"
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 2425f1bacb33..e7d6735d4701 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -34,7 +34,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "iomap.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 11511ae2e0a2..e43c852103f5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -31,7 +31,7 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e18b6f13300e..b627a4351cf0 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -52,7 +52,7 @@
#include <mach/tc.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ce6f0fcd9d12..4ac981c5cf74 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "mmc.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8a08311c4e05..e48ae5fbe1b1 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 034e5bc6a029..37db0ab31528 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -40,7 +40,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index bb9ec345e204..0965b1b689ec 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -38,7 +38,7 @@
#include "board-sx1.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 3ebcd96efbff..ef46c5f67cf9 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,7 +22,7 @@
#include "soc.h"
#include <mach/hardware.h>
-#include <mach/usb.h> /* for OTG_BASE */
+#include "usb.h" /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index e60831c82b78..fa658054fc57 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -17,7 +17,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/usb.h b/arch/arm/mach-omap1/usb.h
new file mode 100644
index 000000000000..08c9344c46e3
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixme correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#define is_usb0_device(config) 1
+#else
+#define is_usb0_device(config) 0
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OHCI_BASE 0xfffba000
+#define OMAP2_OHCI_BASE 0x4805e000
+#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 2d9815dad2ff..b1da584585cf 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -40,8 +40,9 @@
#include <asm/mach-types.h>
#include <linux/omap-dma.h>
+#include <linux/platform_data/usb-omap1.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#include "omap_udc.h"
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 45dcf8292072..7be1ffefc40e 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,6 +25,8 @@
#include <linux/module.h>
#include <linux/usb/otg.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
#include <linux/signal.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
@@ -37,8 +39,6 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
-
#define DRIVER_DESC "OHCI OMAP driver"
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 190699b38b41..88aade82b82b 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -25,7 +25,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#undef VERBOSE
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/include/linux/soc/ti/omap1-usb.h
similarity index 86%
rename from arch/arm/mach-omap1/include/mach/usb.h
rename to include/linux/soc/ti/omap1-usb.h
index 5429d86c7190..67488698601a 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/include/linux/soc/ti/omap1-usb.h
@@ -1,34 +1,20 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_TI_OMAP1_USB
+#define __SOC_TI_OMAP1_USB
/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
+ * Constants in this file are used all over the place, in platform
+ * code, as well as the udc, phy and ohci drivers.
+ * This is not a great design, but unlikely to get fixed after
+ * such a long time. Don't do this elsewhere.
*/
-#if IS_ENABLED(CONFIG_USB_OMAP)
-#define is_usb0_device(config) 1
-#else
-#define is_usb0_device(config) 0
-#endif
-
-#include <linux/platform_data/usb-omap1.h>
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
#define OMAP1_OTG_BASE 0xfffb0400
#define OMAP1_UDC_BASE 0xfffb4000
-#define OMAP1_OHCI_BASE 0xfffba000
-#define OMAP2_OHCI_BASE 0x4805e000
#define OMAP2_UDC_BASE 0x4805e200
#define OMAP2_OTG_BASE 0x4805e300
#define OTG_BASE OMAP1_OTG_BASE
#define UDC_BASE OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
/*
* OTG and transceiver registers, for OMAPs starting with ARM926
@@ -126,3 +112,5 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata)
# define CONF_USB0_ISOLATE_R (1 << 3)
# define CONF_USB_PWRDN_DM_R (1 << 2)
# define CONF_USB_PWRDN_DP_R (1 << 1)
+
+#endif
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: linux-omap@vger.kernel.org, tony@atomide.com,
aaro.koskinen@iki.fi, jmkrzyszt@gmail.com
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-fbdev@vger.kernel.org,
Dominik Brodowski <linux@dominikbrodowski.net>,
Lee Jones <lee.jones@linaro.org>,
Daniel Thompson <daniel.thompson@linaro.org>,
Felipe Balbi <felipe.balbi@linux.intel.com>,
Kevin Hilman <khilman@kernel.org>,
Peter Ujfalusi <peter.ujfalusi@gmail.com>,
Helge Deller <deller@gmx.de>,
Russell King <linux@armlinux.org.uk>,
Krzysztof Kozlowski <krzk@kernel.org>,
Alan Stern <stern@rowland.harvard.edu>,
linux-serial@vger.kernel.org, linux-input@vger.kernel.org,
Arnd Bergmann <arnd@arndb.de>, Mark Brown <broonie@kernel.org>,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
Felipe Balbi <balbi@kernel.org>, Paul Walmsley <paul@pwsan.com>,
Jingoo Han <jingoohan1@gmail.com>,
linux-usb@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-kernel@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
dmaengine@vger.kernel.org, alsa-devel@alsa-project.org
Subject: [PATCH 07/41] ARM: omap1: move mach/usb.h to include/linux/soc
Date: Tue, 19 Apr 2022 15:36:49 +0200 [thread overview]
Message-ID: <20220419133723.1394715-8-arnd@kernel.org> (raw)
In-Reply-To: <20220419133723.1394715-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
The register definitions in this header are used in at least four
different places, with little hope of completely cleaning that up.
Split up the file into a portion that becomes a linux-wide header
under include/linux/soc/ti/, and the parts that are actually only
needed by board files.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-omap1/board-ams-delta.c | 2 +-
arch/arm/mach-omap1/board-generic.c | 2 +-
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-h3.c | 2 +-
arch/arm/mach-omap1/board-htcherald.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/board-nokia770.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
arch/arm/mach-omap1/board-palmte.c | 2 +-
arch/arm/mach-omap1/board-palmtt.c | 2 +-
arch/arm/mach-omap1/board-palmz71.c | 2 +-
arch/arm/mach-omap1/board-sx1.c | 2 +-
arch/arm/mach-omap1/clock_data.c | 2 +-
arch/arm/mach-omap1/usb.c | 2 +-
arch/arm/mach-omap1/usb.h | 25 +++++++++++++++++
drivers/usb/gadget/udc/omap_udc.c | 3 +-
drivers/usb/host/ohci-omap.c | 4 +--
drivers/usb/phy/phy-isp1301-omap.c | 2 +-
.../usb.h => include/linux/soc/ti/omap1-usb.h | 28 ++++++-------------
19 files changed, 52 insertions(+), 38 deletions(-)
create mode 100644 arch/arm/mach-omap1/usb.h
rename arch/arm/mach-omap1/include/mach/usb.h => include/linux/soc/ti/omap1-usb.h (86%)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 12d61ad98395..5b0e99319990 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -38,7 +38,7 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "ams-delta-fiq.h"
#include "board-ams-delta.h"
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c62554990115..8ef0a9b17e92 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -21,7 +21,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 977b0b744c22..b8cf0d84f8ab 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -42,7 +42,7 @@
#include "flash.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4249984f9c30..86260498c344 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -45,7 +45,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 258304edf23e..f7220b60eb61 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -31,7 +31,7 @@
#include "mmc.h"
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 2425f1bacb33..e7d6735d4701 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -34,7 +34,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "iomap.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 11511ae2e0a2..e43c852103f5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -31,7 +31,7 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e18b6f13300e..b627a4351cf0 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -52,7 +52,7 @@
#include <mach/tc.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ce6f0fcd9d12..4ac981c5cf74 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "mmc.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8a08311c4e05..e48ae5fbe1b1 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 034e5bc6a029..37db0ab31528 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -40,7 +40,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index bb9ec345e204..0965b1b689ec 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -38,7 +38,7 @@
#include "board-sx1.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 3ebcd96efbff..ef46c5f67cf9 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,7 +22,7 @@
#include "soc.h"
#include <mach/hardware.h>
-#include <mach/usb.h> /* for OTG_BASE */
+#include "usb.h" /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index e60831c82b78..fa658054fc57 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -17,7 +17,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/usb.h b/arch/arm/mach-omap1/usb.h
new file mode 100644
index 000000000000..08c9344c46e3
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixme correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#define is_usb0_device(config) 1
+#else
+#define is_usb0_device(config) 0
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OHCI_BASE 0xfffba000
+#define OMAP2_OHCI_BASE 0x4805e000
+#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 2d9815dad2ff..b1da584585cf 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -40,8 +40,9 @@
#include <asm/mach-types.h>
#include <linux/omap-dma.h>
+#include <linux/platform_data/usb-omap1.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#include "omap_udc.h"
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 45dcf8292072..7be1ffefc40e 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,6 +25,8 @@
#include <linux/module.h>
#include <linux/usb/otg.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
#include <linux/signal.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
@@ -37,8 +39,6 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
-
#define DRIVER_DESC "OHCI OMAP driver"
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 190699b38b41..88aade82b82b 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -25,7 +25,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#undef VERBOSE
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/include/linux/soc/ti/omap1-usb.h
similarity index 86%
rename from arch/arm/mach-omap1/include/mach/usb.h
rename to include/linux/soc/ti/omap1-usb.h
index 5429d86c7190..67488698601a 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/include/linux/soc/ti/omap1-usb.h
@@ -1,34 +1,20 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_TI_OMAP1_USB
+#define __SOC_TI_OMAP1_USB
/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
+ * Constants in this file are used all over the place, in platform
+ * code, as well as the udc, phy and ohci drivers.
+ * This is not a great design, but unlikely to get fixed after
+ * such a long time. Don't do this elsewhere.
*/
-#if IS_ENABLED(CONFIG_USB_OMAP)
-#define is_usb0_device(config) 1
-#else
-#define is_usb0_device(config) 0
-#endif
-
-#include <linux/platform_data/usb-omap1.h>
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
#define OMAP1_OTG_BASE 0xfffb0400
#define OMAP1_UDC_BASE 0xfffb4000
-#define OMAP1_OHCI_BASE 0xfffba000
-#define OMAP2_OHCI_BASE 0x4805e000
#define OMAP2_UDC_BASE 0x4805e200
#define OMAP2_OTG_BASE 0x4805e300
#define OTG_BASE OMAP1_OTG_BASE
#define UDC_BASE OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
/*
* OTG and transceiver registers, for OMAPs starting with ARM926
@@ -126,3 +112,5 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata)
# define CONF_USB0_ISOLATE_R (1 << 3)
# define CONF_USB_PWRDN_DM_R (1 << 2)
# define CONF_USB_PWRDN_DP_R (1 << 1)
+
+#endif
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: linux-omap@vger.kernel.org, tony@atomide.com,
aaro.koskinen@iki.fi, jmkrzyszt@gmail.com
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
linux-fbdev@vger.kernel.org,
Dominik Brodowski <linux@dominikbrodowski.net>,
Lee Jones <lee.jones@linaro.org>,
Daniel Thompson <daniel.thompson@linaro.org>,
Felipe Balbi <felipe.balbi@linux.intel.com>,
Kevin Hilman <khilman@kernel.org>,
Peter Ujfalusi <peter.ujfalusi@gmail.com>,
Helge Deller <deller@gmx.de>,
Russell King <linux@armlinux.org.uk>,
Krzysztof Kozlowski <krzk@kernel.org>,
Alan Stern <stern@rowland.harvard.edu>,
linux-serial@vger.kernel.org, linux-input@vger.kernel.org,
Arnd Bergmann <arnd@arndb.de>, Mark Brown <broonie@kernel.org>,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
Felipe Balbi <balbi@kernel.org>, Paul Walmsley <paul@pwsan.com>,
Jingoo Han <jingoohan1@gmail.com>,
linux-usb@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-kernel@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
dmaengine@vger.kernel.org, alsa-devel@alsa-project.org
Subject: [PATCH 07/41] ARM: omap1: move mach/usb.h to include/linux/soc
Date: Tue, 19 Apr 2022 15:36:49 +0200 [thread overview]
Message-ID: <20220419133723.1394715-8-arnd@kernel.org> (raw)
In-Reply-To: <20220419133723.1394715-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
The register definitions in this header are used in at least four
different places, with little hope of completely cleaning that up.
Split up the file into a portion that becomes a linux-wide header
under include/linux/soc/ti/, and the parts that are actually only
needed by board files.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-omap1/board-ams-delta.c | 2 +-
arch/arm/mach-omap1/board-generic.c | 2 +-
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-h3.c | 2 +-
arch/arm/mach-omap1/board-htcherald.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/board-nokia770.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
arch/arm/mach-omap1/board-palmte.c | 2 +-
arch/arm/mach-omap1/board-palmtt.c | 2 +-
arch/arm/mach-omap1/board-palmz71.c | 2 +-
arch/arm/mach-omap1/board-sx1.c | 2 +-
arch/arm/mach-omap1/clock_data.c | 2 +-
arch/arm/mach-omap1/usb.c | 2 +-
arch/arm/mach-omap1/usb.h | 25 +++++++++++++++++
drivers/usb/gadget/udc/omap_udc.c | 3 +-
drivers/usb/host/ohci-omap.c | 4 +--
drivers/usb/phy/phy-isp1301-omap.c | 2 +-
.../usb.h => include/linux/soc/ti/omap1-usb.h | 28 ++++++-------------
19 files changed, 52 insertions(+), 38 deletions(-)
create mode 100644 arch/arm/mach-omap1/usb.h
rename arch/arm/mach-omap1/include/mach/usb.h => include/linux/soc/ti/omap1-usb.h (86%)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 12d61ad98395..5b0e99319990 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -38,7 +38,7 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "ams-delta-fiq.h"
#include "board-ams-delta.h"
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c62554990115..8ef0a9b17e92 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -21,7 +21,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 977b0b744c22..b8cf0d84f8ab 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -42,7 +42,7 @@
#include "flash.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4249984f9c30..86260498c344 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -45,7 +45,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 258304edf23e..f7220b60eb61 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -31,7 +31,7 @@
#include "mmc.h"
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 2425f1bacb33..e7d6735d4701 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -34,7 +34,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "iomap.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 11511ae2e0a2..e43c852103f5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -31,7 +31,7 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e18b6f13300e..b627a4351cf0 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -52,7 +52,7 @@
#include <mach/tc.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ce6f0fcd9d12..4ac981c5cf74 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "mmc.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8a08311c4e05..e48ae5fbe1b1 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 034e5bc6a029..37db0ab31528 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -40,7 +40,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index bb9ec345e204..0965b1b689ec 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -38,7 +38,7 @@
#include "board-sx1.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 3ebcd96efbff..ef46c5f67cf9 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,7 +22,7 @@
#include "soc.h"
#include <mach/hardware.h>
-#include <mach/usb.h> /* for OTG_BASE */
+#include "usb.h" /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index e60831c82b78..fa658054fc57 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -17,7 +17,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/usb.h b/arch/arm/mach-omap1/usb.h
new file mode 100644
index 000000000000..08c9344c46e3
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixme correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#define is_usb0_device(config) 1
+#else
+#define is_usb0_device(config) 0
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OHCI_BASE 0xfffba000
+#define OMAP2_OHCI_BASE 0x4805e000
+#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 2d9815dad2ff..b1da584585cf 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -40,8 +40,9 @@
#include <asm/mach-types.h>
#include <linux/omap-dma.h>
+#include <linux/platform_data/usb-omap1.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#include "omap_udc.h"
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 45dcf8292072..7be1ffefc40e 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,6 +25,8 @@
#include <linux/module.h>
#include <linux/usb/otg.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
#include <linux/signal.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
@@ -37,8 +39,6 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
-
#define DRIVER_DESC "OHCI OMAP driver"
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 190699b38b41..88aade82b82b 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -25,7 +25,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#undef VERBOSE
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/include/linux/soc/ti/omap1-usb.h
similarity index 86%
rename from arch/arm/mach-omap1/include/mach/usb.h
rename to include/linux/soc/ti/omap1-usb.h
index 5429d86c7190..67488698601a 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/include/linux/soc/ti/omap1-usb.h
@@ -1,34 +1,20 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_TI_OMAP1_USB
+#define __SOC_TI_OMAP1_USB
/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
+ * Constants in this file are used all over the place, in platform
+ * code, as well as the udc, phy and ohci drivers.
+ * This is not a great design, but unlikely to get fixed after
+ * such a long time. Don't do this elsewhere.
*/
-#if IS_ENABLED(CONFIG_USB_OMAP)
-#define is_usb0_device(config) 1
-#else
-#define is_usb0_device(config) 0
-#endif
-
-#include <linux/platform_data/usb-omap1.h>
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
#define OMAP1_OTG_BASE 0xfffb0400
#define OMAP1_UDC_BASE 0xfffb4000
-#define OMAP1_OHCI_BASE 0xfffba000
-#define OMAP2_OHCI_BASE 0x4805e000
#define OMAP2_UDC_BASE 0x4805e200
#define OMAP2_OTG_BASE 0x4805e300
#define OTG_BASE OMAP1_OTG_BASE
#define UDC_BASE OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
/*
* OTG and transceiver registers, for OMAPs starting with ARM926
@@ -126,3 +112,5 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata)
# define CONF_USB0_ISOLATE_R (1 << 3)
# define CONF_USB_PWRDN_DM_R (1 << 2)
# define CONF_USB_PWRDN_DP_R (1 << 1)
+
+#endif
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: linux-omap@vger.kernel.org, tony@atomide.com,
aaro.koskinen@iki.fi, jmkrzyszt@gmail.com
Cc: Arnd Bergmann <arnd@arndb.de>,
Russell King <linux@armlinux.org.uk>,
Paul Walmsley <paul@pwsan.com>, Kevin Hilman <khilman@kernel.org>,
Peter Ujfalusi <peter.ujfalusi@gmail.com>,
Vinod Koul <vkoul@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Dominik Brodowski <linux@dominikbrodowski.net>,
Mark Brown <broonie@kernel.org>, Felipe Balbi <balbi@kernel.org>,
Alan Stern <stern@rowland.harvard.edu>,
Lee Jones <lee.jones@linaro.org>,
Daniel Thompson <daniel.thompson@linaro.org>,
Jingoo Han <jingoohan1@gmail.com>, Helge Deller <deller@gmx.de>,
Linus Walleij <linus.walleij@linaro.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
dmaengine@vger.kernel.org, linux-input@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-serial@vger.kernel.org,
dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org,
alsa-devel@alsa-project.org,
Felipe Balbi <felipe.balbi@linux.intel.com>
Subject: [PATCH 07/41] ARM: omap1: move mach/usb.h to include/linux/soc
Date: Tue, 19 Apr 2022 15:36:49 +0200 [thread overview]
Message-ID: <20220419133723.1394715-8-arnd@kernel.org> (raw)
In-Reply-To: <20220419133723.1394715-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
The register definitions in this header are used in at least four
different places, with little hope of completely cleaning that up.
Split up the file into a portion that becomes a linux-wide header
under include/linux/soc/ti/, and the parts that are actually only
needed by board files.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-omap1/board-ams-delta.c | 2 +-
arch/arm/mach-omap1/board-generic.c | 2 +-
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-h3.c | 2 +-
arch/arm/mach-omap1/board-htcherald.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/board-nokia770.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
arch/arm/mach-omap1/board-palmte.c | 2 +-
arch/arm/mach-omap1/board-palmtt.c | 2 +-
arch/arm/mach-omap1/board-palmz71.c | 2 +-
arch/arm/mach-omap1/board-sx1.c | 2 +-
arch/arm/mach-omap1/clock_data.c | 2 +-
arch/arm/mach-omap1/usb.c | 2 +-
arch/arm/mach-omap1/usb.h | 25 +++++++++++++++++
drivers/usb/gadget/udc/omap_udc.c | 3 +-
drivers/usb/host/ohci-omap.c | 4 +--
drivers/usb/phy/phy-isp1301-omap.c | 2 +-
.../usb.h => include/linux/soc/ti/omap1-usb.h | 28 ++++++-------------
19 files changed, 52 insertions(+), 38 deletions(-)
create mode 100644 arch/arm/mach-omap1/usb.h
rename arch/arm/mach-omap1/include/mach/usb.h => include/linux/soc/ti/omap1-usb.h (86%)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 12d61ad98395..5b0e99319990 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -38,7 +38,7 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "ams-delta-fiq.h"
#include "board-ams-delta.h"
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c62554990115..8ef0a9b17e92 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -21,7 +21,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 977b0b744c22..b8cf0d84f8ab 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -42,7 +42,7 @@
#include "flash.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4249984f9c30..86260498c344 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -45,7 +45,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 258304edf23e..f7220b60eb61 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -31,7 +31,7 @@
#include "mmc.h"
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 2425f1bacb33..e7d6735d4701 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -34,7 +34,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "iomap.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 11511ae2e0a2..e43c852103f5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -31,7 +31,7 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e18b6f13300e..b627a4351cf0 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -52,7 +52,7 @@
#include <mach/tc.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ce6f0fcd9d12..4ac981c5cf74 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "mmc.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8a08311c4e05..e48ae5fbe1b1 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 034e5bc6a029..37db0ab31528 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -40,7 +40,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index bb9ec345e204..0965b1b689ec 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -38,7 +38,7 @@
#include "board-sx1.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 3ebcd96efbff..ef46c5f67cf9 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,7 +22,7 @@
#include "soc.h"
#include <mach/hardware.h>
-#include <mach/usb.h> /* for OTG_BASE */
+#include "usb.h" /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index e60831c82b78..fa658054fc57 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -17,7 +17,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/usb.h b/arch/arm/mach-omap1/usb.h
new file mode 100644
index 000000000000..08c9344c46e3
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixme correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#define is_usb0_device(config) 1
+#else
+#define is_usb0_device(config) 0
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OHCI_BASE 0xfffba000
+#define OMAP2_OHCI_BASE 0x4805e000
+#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 2d9815dad2ff..b1da584585cf 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -40,8 +40,9 @@
#include <asm/mach-types.h>
#include <linux/omap-dma.h>
+#include <linux/platform_data/usb-omap1.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#include "omap_udc.h"
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 45dcf8292072..7be1ffefc40e 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,6 +25,8 @@
#include <linux/module.h>
#include <linux/usb/otg.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
#include <linux/signal.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
@@ -37,8 +39,6 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
-
#define DRIVER_DESC "OHCI OMAP driver"
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 190699b38b41..88aade82b82b 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -25,7 +25,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#undef VERBOSE
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/include/linux/soc/ti/omap1-usb.h
similarity index 86%
rename from arch/arm/mach-omap1/include/mach/usb.h
rename to include/linux/soc/ti/omap1-usb.h
index 5429d86c7190..67488698601a 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/include/linux/soc/ti/omap1-usb.h
@@ -1,34 +1,20 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_TI_OMAP1_USB
+#define __SOC_TI_OMAP1_USB
/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
+ * Constants in this file are used all over the place, in platform
+ * code, as well as the udc, phy and ohci drivers.
+ * This is not a great design, but unlikely to get fixed after
+ * such a long time. Don't do this elsewhere.
*/
-#if IS_ENABLED(CONFIG_USB_OMAP)
-#define is_usb0_device(config) 1
-#else
-#define is_usb0_device(config) 0
-#endif
-
-#include <linux/platform_data/usb-omap1.h>
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
#define OMAP1_OTG_BASE 0xfffb0400
#define OMAP1_UDC_BASE 0xfffb4000
-#define OMAP1_OHCI_BASE 0xfffba000
-#define OMAP2_OHCI_BASE 0x4805e000
#define OMAP2_UDC_BASE 0x4805e200
#define OMAP2_OTG_BASE 0x4805e300
#define OTG_BASE OMAP1_OTG_BASE
#define UDC_BASE OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
/*
* OTG and transceiver registers, for OMAPs starting with ARM926
@@ -126,3 +112,5 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata)
# define CONF_USB0_ISOLATE_R (1 << 3)
# define CONF_USB_PWRDN_DM_R (1 << 2)
# define CONF_USB_PWRDN_DP_R (1 << 1)
+
+#endif
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-04-19 13:39 UTC|newest]
Thread overview: 245+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-19 13:36 [PATCH 00/41] OMAP1 full multiplatform conversion Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 01/41] video: fbdev: omapfb: lcd_ams_delta: fix unused variable warning Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-20 9:24 ` Sergei Shtylyov
2022-04-20 9:24 ` Sergei Shtylyov
2022-04-20 9:24 ` Sergei Shtylyov
2022-04-20 9:24 ` Sergei Shtylyov
2022-04-20 11:32 ` Arnd Bergmann
2022-04-20 11:32 ` Arnd Bergmann
2022-04-20 11:32 ` Arnd Bergmann
2022-04-20 11:32 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 02/41] ARM: omap1: innovator: pass lcd control address as pdata Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 03/41] ARM: omap1: move lcd_dma code into omapfb driver Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 04/41] ARM: omap1: declare a dummy omap_set_dma_priority Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 05/41] fbdev: omap: pass irqs as resource Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 06/41] ARM: omap1: ams-delta: remove camera leftovers Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann [this message]
2022-04-19 13:36 ` [PATCH 07/41] ARM: omap1: move mach/usb.h to include/linux/soc Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 08/41] ARM: omap1: move some headers " Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 09/41] ARM: omap1: move perseus spi pinconf to board file Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 10/41] ARM: omap1: move CF chipselect setup " Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 11/41] fbdev: omap: avoid using mach/*.h files Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 12/41] usb: omap: avoid mach/*.h headers Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 13/41] clocksource: ti-dmtimer: avoid using mach/hardware.h Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 14/41] serial: 8250/omap1: include linux/soc/ti/omap1-soc.h Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-20 14:46 ` Greg KH
2022-04-20 14:46 ` Greg KH
2022-04-20 14:46 ` Greg KH
2022-04-20 14:46 ` Greg KH
2022-04-19 13:36 ` [PATCH 15/41] input: omap: void using mach/*.h headers Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-20 20:44 ` Dmitry Torokhov
2022-04-20 20:44 ` Dmitry Torokhov
2022-04-20 20:44 ` Dmitry Torokhov
2022-04-20 20:44 ` Dmitry Torokhov
2022-04-19 13:36 ` [PATCH 16/41] ARM: omap1: innovator: move ohci phy power handling to board file Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 17/41] ARM: omap1: move 32k counter from plat-omap to mach-omap1 Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-21 6:17 ` Tony Lindgren
2022-04-21 6:17 ` Tony Lindgren
2022-04-21 6:17 ` Tony Lindgren
2022-04-21 6:17 ` Tony Lindgren
2022-04-19 13:37 ` [PATCH 18/41] ARM: omap: remove debug-leds driver Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 19/41] ARM: omap: dma: make usb support optional Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-29 19:24 ` Péter Ujfalusi
2022-04-29 19:24 ` Péter Ujfalusi
2022-04-29 19:24 ` Péter Ujfalusi
2022-04-19 13:37 ` [PATCH 20/41] dma: omap: hide legacy interface Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-22 5:55 ` Vinod Koul
2022-04-22 5:55 ` Vinod Koul
2022-04-22 5:55 ` Vinod Koul
2022-04-22 5:55 ` Vinod Koul
2022-04-19 13:37 ` [PATCH 21/41] ARM: omap1: dma: remove omap2 specific bits Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-29 19:26 ` Péter Ujfalusi
2022-04-29 19:26 ` Péter Ujfalusi
2022-04-29 19:26 ` Péter Ujfalusi
2022-04-19 13:37 ` [PATCH 22/41] ARM: omap1: move plat/dma.c to mach/omap-dma.c Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-29 19:36 ` Péter Ujfalusi
2022-04-29 19:36 ` Péter Ujfalusi
2022-04-29 19:36 ` Péter Ujfalusi
2022-04-19 13:37 ` [PATCH 23/41] ARM: omap: split up arch/arm/plat-omap/Kconfig Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 24/41] ARM: omap: un-merge plat/sram.c Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-21 6:32 ` Tony Lindgren
2022-04-21 6:32 ` Tony Lindgren
2022-04-21 6:32 ` Tony Lindgren
2022-04-21 6:32 ` Tony Lindgren
2022-04-19 13:37 ` [PATCH 25/41] ARM: omap: remove empty plat-omap directory Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 26/41] ARM: omap1: relocate static I/O mapping Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-20 13:46 ` Aaro Koskinen
2022-04-20 13:46 ` Aaro Koskinen
2022-04-20 13:46 ` Aaro Koskinen
2022-04-20 13:46 ` Aaro Koskinen
2022-04-20 19:20 ` Arnd Bergmann
2022-04-20 19:20 ` Arnd Bergmann
2022-04-20 19:20 ` Arnd Bergmann
2022-04-20 19:20 ` Arnd Bergmann
2022-04-21 5:19 ` Tony Lindgren
2022-04-21 5:19 ` Tony Lindgren
2022-04-21 5:19 ` Tony Lindgren
2022-04-21 5:19 ` Tony Lindgren
2022-04-19 13:37 ` [PATCH 27/41] ARM: omap1: use pci_remap_iospace() for omap_cf Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 28/41] ARM: omap1: move mach/*.h into mach directory Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 29/41] ARM: omap1: fix build with no SoC selected Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 30/41] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 31/41] ARM: OMAP1: clock: Fix early UART rate issues Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 32/41] ARM: OMAP1: clock: Fix UART rate reporting algorithm Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 33/41] ARM: OMAP1: clock: Remove unused code Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 34/41] ARM: OMAP1: clock: Remove noop code Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 35/41] usb: host: ohci-omap: Make it CCF clk API compatible Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 36/41] usb: gadget: omap_udc: " Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 37/41] [MERGED] video: fbdev: omap: " Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 38/41] [MERGED] mmc: " Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 39/41] [MERGED] ASoC: ti: osk5912: " Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 40/41] [TO BE REBASED] ARM: OMAP1: clock: Convert to CCF Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-21 6:24 ` Tony Lindgren
2022-04-21 6:24 ` Tony Lindgren
2022-04-21 6:24 ` Tony Lindgren
2022-04-21 6:24 ` Tony Lindgren
2022-04-19 13:37 ` [PATCH 41/41] [TO BE REBASED] ARM: omap1: enable multiplatform Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 13:37 ` Arnd Bergmann
2022-04-19 14:15 ` [PATCH 00/41] OMAP1 full multiplatform conversion Ulf Hansson
2022-04-19 14:15 ` Ulf Hansson
2022-04-19 14:15 ` Ulf Hansson
2022-04-19 14:15 ` Ulf Hansson
2022-04-21 6:27 ` Tony Lindgren
2022-04-21 6:27 ` Tony Lindgren
2022-04-21 6:27 ` Tony Lindgren
2022-04-21 6:27 ` Tony Lindgren
2022-04-20 17:08 ` Aaro Koskinen
2022-04-20 17:08 ` Aaro Koskinen
2022-04-20 17:08 ` Aaro Koskinen
2022-04-20 17:08 ` Aaro Koskinen
2022-04-20 20:00 ` Arnd Bergmann
2022-04-20 20:00 ` Arnd Bergmann
2022-04-20 20:00 ` Arnd Bergmann
2022-04-20 20:00 ` Arnd Bergmann
2022-04-21 13:34 ` Aaro Koskinen
2022-04-21 13:34 ` Aaro Koskinen
2022-04-21 13:34 ` Aaro Koskinen
2022-04-21 13:34 ` Aaro Koskinen
2022-04-21 14:46 ` Arnd Bergmann
2022-04-21 14:46 ` Arnd Bergmann
2022-04-21 14:46 ` Arnd Bergmann
2022-04-21 14:46 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220419133723.1394715-8-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=aaro.koskinen@iki.fi \
--cc=alsa-devel@alsa-project.org \
--cc=arnd@arndb.de \
--cc=balbi@kernel.org \
--cc=broonie@kernel.org \
--cc=daniel.thompson@linaro.org \
--cc=deller@gmx.de \
--cc=dmaengine@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=felipe.balbi@linux.intel.com \
--cc=jingoohan1@gmail.com \
--cc=jmkrzyszt@gmail.com \
--cc=khilman@kernel.org \
--cc=krzk@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linux@dominikbrodowski.net \
--cc=paul@pwsan.com \
--cc=peter.ujfalusi@gmail.com \
--cc=stern@rowland.harvard.edu \
--cc=tony@atomide.com \
--cc=ulf.hansson@linaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.