All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
To: <ath11k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<robh@kernel.org>, <mka@chromium.org>,
	Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Subject: [PATCH v5 11/12] ath11k: Update WBM idle ring HP after FW mode on
Date: Tue, 26 Apr 2022 20:24:55 +0530	[thread overview]
Message-ID: <20220426145456.8055-12-quic_mpubbise@quicinc.com> (raw)
In-Reply-To: <20220426145456.8055-1-quic_mpubbise@quicinc.com>

Currently, WBM idle ring HP is updated much before the shadow
configuration is sent to the FW. Any update to the shadow
registers before FW mode on request would not be reflected
on to the actual HW registers failing to bring up the device.
Send FW mode ON QMI request before WBM idle ring HP update
to fix this problem.

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/ce.c   |  4 +--
 drivers/net/wireless/ath/ath11k/core.c | 45 ++++++++++++++++++--------
 2 files changed, 32 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/ce.c b/drivers/net/wireless/ath/ath11k/ce.c
index aaa7b05ff49d..c14c51f38709 100644
--- a/drivers/net/wireless/ath/ath11k/ce.c
+++ b/drivers/net/wireless/ath/ath11k/ce.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include "dp_rx.h"
@@ -918,9 +919,6 @@ int ath11k_ce_init_pipes(struct ath11k_base *ab)
 	int i;
 	int ret;
 
-	ath11k_ce_get_shadow_config(ab, &ab->qmi.ce_cfg.shadow_reg_v2,
-				    &ab->qmi.ce_cfg.shadow_reg_v2_len);
-
 	for (i = 0; i < ab->hw_params.ce_count; i++) {
 		pipe = &ab->ce.ce_pipe[i];
 
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index f57758d72f29..599908438588 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -1196,21 +1196,14 @@ static void ath11k_core_pdev_destroy(struct ath11k_base *ab)
 	ath11k_debugfs_pdev_destroy(ab);
 }
 
-static int ath11k_core_start(struct ath11k_base *ab,
-			     enum ath11k_firmware_mode mode)
+static int ath11k_core_start(struct ath11k_base *ab)
 {
 	int ret;
 
-	ret = ath11k_qmi_firmware_start(ab, mode);
-	if (ret) {
-		ath11k_err(ab, "failed to attach wmi: %d\n", ret);
-		return ret;
-	}
-
 	ret = ath11k_wmi_attach(ab);
 	if (ret) {
 		ath11k_err(ab, "failed to attach wmi: %d\n", ret);
-		goto err_firmware_stop;
+		return ret;
 	}
 
 	ret = ath11k_htc_init(ab);
@@ -1310,8 +1303,23 @@ static int ath11k_core_start(struct ath11k_base *ab,
 	ath11k_hif_stop(ab);
 err_wmi_detach:
 	ath11k_wmi_detach(ab);
-err_firmware_stop:
-	ath11k_qmi_firmware_stop(ab);
+
+	return ret;
+}
+
+static int ath11k_core_start_firmware(struct ath11k_base *ab,
+				      enum ath11k_firmware_mode mode)
+{
+	int ret;
+
+	ath11k_ce_get_shadow_config(ab, &ab->qmi.ce_cfg.shadow_reg_v2,
+				    &ab->qmi.ce_cfg.shadow_reg_v2_len);
+
+	ret = ath11k_qmi_firmware_start(ab, mode);
+	if (ret) {
+		ath11k_err(ab, "failed to send firmware start: %d\n", ret);
+		return ret;
+	}
 
 	return ret;
 }
@@ -1341,16 +1349,22 @@ int ath11k_core_qmi_firmware_ready(struct ath11k_base *ab)
 {
 	int ret;
 
+	ret = ath11k_core_start_firmware(ab, ATH11K_FIRMWARE_MODE_NORMAL);
+	if (ret) {
+		ath11k_err(ab, "failed to start firmware: %d\n", ret);
+		return ret;
+	}
+
 	ret = ath11k_ce_init_pipes(ab);
 	if (ret) {
 		ath11k_err(ab, "failed to initialize CE: %d\n", ret);
-		return ret;
+		goto err_firmware_stop;
 	}
 
 	ret = ath11k_dp_alloc(ab);
 	if (ret) {
 		ath11k_err(ab, "failed to init DP: %d\n", ret);
-		return ret;
+		goto err_firmware_stop;
 	}
 
 	switch (ath11k_crypto_mode) {
@@ -1371,7 +1385,7 @@ int ath11k_core_qmi_firmware_ready(struct ath11k_base *ab)
 		set_bit(ATH11K_FLAG_RAW_MODE, &ab->dev_flags);
 
 	mutex_lock(&ab->core_lock);
-	ret = ath11k_core_start(ab, ATH11K_FIRMWARE_MODE_NORMAL);
+	ret = ath11k_core_start(ab);
 	if (ret) {
 		ath11k_err(ab, "failed to start core: %d\n", ret);
 		goto err_dp_free;
@@ -1400,6 +1414,9 @@ int ath11k_core_qmi_firmware_ready(struct ath11k_base *ab)
 err_dp_free:
 	ath11k_dp_free(ab);
 	mutex_unlock(&ab->core_lock);
+err_firmware_stop:
+	ath11k_qmi_firmware_stop(ab);
+
 	return ret;
 }
 
-- 
2.35.1


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

WARNING: multiple messages have this Message-ID (diff)
From: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
To: <ath11k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<robh@kernel.org>, <mka@chromium.org>,
	Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Subject: [PATCH v5 11/12] ath11k: Update WBM idle ring HP after FW mode on
Date: Tue, 26 Apr 2022 20:24:55 +0530	[thread overview]
Message-ID: <20220426145456.8055-12-quic_mpubbise@quicinc.com> (raw)
In-Reply-To: <20220426145456.8055-1-quic_mpubbise@quicinc.com>

Currently, WBM idle ring HP is updated much before the shadow
configuration is sent to the FW. Any update to the shadow
registers before FW mode on request would not be reflected
on to the actual HW registers failing to bring up the device.
Send FW mode ON QMI request before WBM idle ring HP update
to fix this problem.

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/ce.c   |  4 +--
 drivers/net/wireless/ath/ath11k/core.c | 45 ++++++++++++++++++--------
 2 files changed, 32 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/ce.c b/drivers/net/wireless/ath/ath11k/ce.c
index aaa7b05ff49d..c14c51f38709 100644
--- a/drivers/net/wireless/ath/ath11k/ce.c
+++ b/drivers/net/wireless/ath/ath11k/ce.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include "dp_rx.h"
@@ -918,9 +919,6 @@ int ath11k_ce_init_pipes(struct ath11k_base *ab)
 	int i;
 	int ret;
 
-	ath11k_ce_get_shadow_config(ab, &ab->qmi.ce_cfg.shadow_reg_v2,
-				    &ab->qmi.ce_cfg.shadow_reg_v2_len);
-
 	for (i = 0; i < ab->hw_params.ce_count; i++) {
 		pipe = &ab->ce.ce_pipe[i];
 
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index f57758d72f29..599908438588 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -1196,21 +1196,14 @@ static void ath11k_core_pdev_destroy(struct ath11k_base *ab)
 	ath11k_debugfs_pdev_destroy(ab);
 }
 
-static int ath11k_core_start(struct ath11k_base *ab,
-			     enum ath11k_firmware_mode mode)
+static int ath11k_core_start(struct ath11k_base *ab)
 {
 	int ret;
 
-	ret = ath11k_qmi_firmware_start(ab, mode);
-	if (ret) {
-		ath11k_err(ab, "failed to attach wmi: %d\n", ret);
-		return ret;
-	}
-
 	ret = ath11k_wmi_attach(ab);
 	if (ret) {
 		ath11k_err(ab, "failed to attach wmi: %d\n", ret);
-		goto err_firmware_stop;
+		return ret;
 	}
 
 	ret = ath11k_htc_init(ab);
@@ -1310,8 +1303,23 @@ static int ath11k_core_start(struct ath11k_base *ab,
 	ath11k_hif_stop(ab);
 err_wmi_detach:
 	ath11k_wmi_detach(ab);
-err_firmware_stop:
-	ath11k_qmi_firmware_stop(ab);
+
+	return ret;
+}
+
+static int ath11k_core_start_firmware(struct ath11k_base *ab,
+				      enum ath11k_firmware_mode mode)
+{
+	int ret;
+
+	ath11k_ce_get_shadow_config(ab, &ab->qmi.ce_cfg.shadow_reg_v2,
+				    &ab->qmi.ce_cfg.shadow_reg_v2_len);
+
+	ret = ath11k_qmi_firmware_start(ab, mode);
+	if (ret) {
+		ath11k_err(ab, "failed to send firmware start: %d\n", ret);
+		return ret;
+	}
 
 	return ret;
 }
@@ -1341,16 +1349,22 @@ int ath11k_core_qmi_firmware_ready(struct ath11k_base *ab)
 {
 	int ret;
 
+	ret = ath11k_core_start_firmware(ab, ATH11K_FIRMWARE_MODE_NORMAL);
+	if (ret) {
+		ath11k_err(ab, "failed to start firmware: %d\n", ret);
+		return ret;
+	}
+
 	ret = ath11k_ce_init_pipes(ab);
 	if (ret) {
 		ath11k_err(ab, "failed to initialize CE: %d\n", ret);
-		return ret;
+		goto err_firmware_stop;
 	}
 
 	ret = ath11k_dp_alloc(ab);
 	if (ret) {
 		ath11k_err(ab, "failed to init DP: %d\n", ret);
-		return ret;
+		goto err_firmware_stop;
 	}
 
 	switch (ath11k_crypto_mode) {
@@ -1371,7 +1385,7 @@ int ath11k_core_qmi_firmware_ready(struct ath11k_base *ab)
 		set_bit(ATH11K_FLAG_RAW_MODE, &ab->dev_flags);
 
 	mutex_lock(&ab->core_lock);
-	ret = ath11k_core_start(ab, ATH11K_FIRMWARE_MODE_NORMAL);
+	ret = ath11k_core_start(ab);
 	if (ret) {
 		ath11k_err(ab, "failed to start core: %d\n", ret);
 		goto err_dp_free;
@@ -1400,6 +1414,9 @@ int ath11k_core_qmi_firmware_ready(struct ath11k_base *ab)
 err_dp_free:
 	ath11k_dp_free(ab);
 	mutex_unlock(&ab->core_lock);
+err_firmware_stop:
+	ath11k_qmi_firmware_stop(ab);
+
 	return ret;
 }
 
-- 
2.35.1


  parent reply	other threads:[~2022-04-26 14:55 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-26 14:54 [PATCH v5 00/12] add support for WCN6750 Manikanta Pubbisetty
2022-04-26 14:54 ` Manikanta Pubbisetty
2022-04-26 14:54 ` [PATCH v5 01/12] dt: bindings: net: add bindings of WCN6750 for ath11k Manikanta Pubbisetty
2022-04-26 14:54   ` Manikanta Pubbisetty
2022-04-26 14:54 ` [PATCH v5 02/12] ath11k: Add HW params for WCN6750 Manikanta Pubbisetty
2022-04-26 14:54   ` Manikanta Pubbisetty
2022-04-26 14:54 ` [PATCH v5 03/12] ath11k: Add bus " Manikanta Pubbisetty
2022-04-26 14:54   ` Manikanta Pubbisetty
2022-04-26 14:54 ` [PATCH v5 04/12] ath11k: Add register access logic " Manikanta Pubbisetty
2022-04-26 14:54   ` Manikanta Pubbisetty
2022-04-26 14:54 ` [PATCH v5 05/12] ath11k: Fetch device information via QMI " Manikanta Pubbisetty
2022-04-26 14:54   ` Manikanta Pubbisetty
2022-04-26 14:54 ` [PATCH v5 06/12] ath11k: Add QMI changes " Manikanta Pubbisetty
2022-04-26 14:54   ` Manikanta Pubbisetty
2022-04-26 14:54 ` [PATCH v5 07/12] ath11k: HAL changes to support WCN6750 Manikanta Pubbisetty
2022-04-26 14:54   ` Manikanta Pubbisetty
2022-04-26 14:54 ` [PATCH v5 08/12] ath11k: Datapath " Manikanta Pubbisetty
2022-04-26 14:54   ` Manikanta Pubbisetty
2022-04-26 14:54 ` [PATCH v5 09/12] ath11k: Do not put HW in DBS mode for WCN6750 Manikanta Pubbisetty
2022-04-26 14:54   ` Manikanta Pubbisetty
2022-04-26 14:54 ` [PATCH v5 10/12] ath11k: WMI changes to support WCN6750 Manikanta Pubbisetty
2022-04-26 14:54   ` Manikanta Pubbisetty
2022-04-26 14:54 ` Manikanta Pubbisetty [this message]
2022-04-26 14:54   ` [PATCH v5 11/12] ath11k: Update WBM idle ring HP after FW mode on Manikanta Pubbisetty
2022-04-26 14:54 ` [PATCH v5 12/12] ath11k: Add support for WCN6750 device Manikanta Pubbisetty
2022-04-26 14:54   ` Manikanta Pubbisetty
2022-04-27  5:14 ` [PATCH v5 00/12] add support for WCN6750 Kalle Valo
2022-04-27  5:14   ` Kalle Valo
2022-04-27  5:16   ` Kalle Valo
2022-04-27  5:16     ` Kalle Valo
2022-04-27  5:32     ` Manikanta Pubbisetty
2022-04-27  5:32       ` Manikanta Pubbisetty

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220426145456.8055-12-quic_mpubbise@quicinc.com \
    --to=quic_mpubbise@quicinc.com \
    --cc=ath11k@lists.infradead.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.