* [PATCH v10 00/45] CXl 2.0 emulation Support
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Note that due to a bug in the kernel handling of Mem_Enable
in the CXL Device DVSEC a fix is needed to sucessfully use these
patches with Linux.
https://lore.kernel.org/linux-cxl/CAPcyv4gFWw9s6r9kUoL-_P9qnaZSJBMz+EcmfY+0g1NHrJQx7Q@mail.gmail.com/T/#t
Note the issue was detected using this emulation.
Changes since v9:
Thanks to Tong Zhang and Markus Armbruster for review of v9.
- Fixed return of all 1s on HDM decoder not matching.
- Off by one error in an assert for register writes.
- Write masks for both PCI config space structures and
registers in MMIO space. These were partly queued up
for a future patch set, but after review comment from
Tong, I decided it was best to put these in place from
the start. Note I was a bit undecided on whether to drop
review tags for this (it's quit a bit of code, but very
simple). Alex, and Adam if you want to take another look
at patch 2 in particular that would be great.
- Tag from Markus added.
- Fix for wrong setting of Mem_Enable as described in the
thread linked above.
The series can be applied in parts if that makes sense:
Possible partial sets:
1-15 (end with the test of the pxb-cxl host bridge)
16-22 (end with the test for root port and type3 device)
23-39 (end with tests on x86 pc for CFMWS including BIOS table updates)
40-41 (arm64 virt support + simple test case)
42 (documentation - we could pull this forwards to before the arm support)
43-45 (switch support)
gitlab tree at gitlab.com/jic23/qemu cxl-v10-draft-2
As before that tree has additional patches on top that will form
part of future postings. This time it has SPDM support via
a socket connection to DMTF/spdm_emu / libspdm. I'll send an RFC
on that topic as it's a discussion that can go on in parallel.
Several people have asked about contributing additional features.
As those come in I'll apply them on top of this series and handle
rebases etc as necessary whilst we seek to get this first set
of patches upstream.
Updated background info:
Looking in particular for:
* Review of the PCI interactions
* x86 and ARM machine interactions (particularly the memory maps)
* Review of the interleaving approach - is the basic idea
acceptable?
* Review of the command line interface.
* CXL related review welcome but much of that got reviewed
in earlier versions and hasn't changed substantially.
TODOs:
* Volatile memory devices (easy but it's more code so left for now).
* Hotplug? May not need much but it's not tested yet!
* More tests and tighter verification that values written to hardware
are actually valid - stuff that real hardware would check.
* Testing, testing and more testing. I have been running a basic
set of ARM and x86 tests on this, but there is always room for
more tests and greater automation.
* CFMWS flags as requested by Ben.
* Parititioning support - ability to change the balance of volatile
and non volatile memory on demand.
* Trace points as suggested my Mark to help with debugging memory
interleaving setup.
Why do we want QEMU emulation of CXL?
As Ben stated in V3, QEMU support has been critical to getting OS
software written given lack of availability of hardware supporting the
latest CXL features (coupled with very high demand for support being
ready in a timely fashion). What has become clear since Ben's v3
is that situation is a continuous one. Whilst we can't talk about
them yet, CXL 3.0 features and OS support have been prototyped on
top of this support and a lot of the ongoing kernel work is being
tested against these patches. The kernel CXL mocking code allows
some forms of testing, but QEMU provides a more versatile and
extensible platform.
Other features on the qemu-list that build on these include PCI-DOE
/CDAT support from the Avery Design team further showing how this
code is useful. Whilst not directly related this is also the test
platform for work on PCI IDE/CMA + related DMTF SPDM as CXL both
utilizes and extends those technologies and is likely to be an early
adopter.
Refs:
CMA Kernel: https://lore.kernel.org/all/20210804161839.3492053-1-Jonathan.Cameron@huawei.com/
CMA Qemu: https://lore.kernel.org/qemu-devel/1624665723-5169-1-git-send-email-cbrowy@avery-design.com/
DOE Qemu: https://lore.kernel.org/qemu-devel/1623329999-15662-1-git-send-email-cbrowy@avery-design.com/
As can be seen there is non trivial interaction with other areas of
Qemu, particularly PCI and keeping this set up to date is proving
a burden we'd rather do without :)
Ben mentioned a few other good reasons in v3:
https://lore.kernel.org/qemu-devel/20210202005948.241655-1-ben.widawsky@intel.com/
What we have here is about what you need for it to be useful for testing
currently kernel code. Note the kernel code is moving fast so
since v4, some features have been introduced we don't yet support in
QEMU (e.g. use of the PCIe serial number extended capability).
All comments welcome.
Additional info that was here in v5 is now in the documentation patch.
Thanks,
Jonathan
Ben Widawsky (24):
hw/pci/cxl: Add a CXL component type (interface)
hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5)
hw/cxl/device: Introduce a CXL device (8.2.8)
hw/cxl/device: Implement the CAP array (8.2.8.1-2)
hw/cxl/device: Implement basic mailbox (8.2.8.4)
hw/cxl/device: Add memory device utilities
hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1)
hw/cxl/device: Timestamp implementation (8.2.9.3)
hw/cxl/device: Add log commands (8.2.9.4) + CEL
hw/pxb: Use a type for realizing expanders
hw/pci/cxl: Create a CXL bus type
hw/pxb: Allow creation of a CXL PXB (host bridge)
hw/cxl/rp: Add a root port
hw/cxl/device: Add a memory device (8.2.8.5)
hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12)
hw/cxl/device: Add some trivial commands
hw/cxl/device: Plumb real Label Storage Area (LSA) sizing
hw/cxl/device: Implement get/set Label Storage Area (LSA)
hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142)
acpi/cxl: Add _OSC implementation (9.14.2)
acpi/cxl: Create the CEDT (9.14.1)
acpi/cxl: Introduce CFMWS structures in CEDT
hw/cxl/component Add a dumb HDM decoder handler
qtest/cxl: Add more complex test cases with CFMWs
Jonathan Cameron (21):
MAINTAINERS: Add entry for Compute Express Link Emulation
cxl: Machine level control on whether CXL support is enabled
qtest/cxl: Introduce initial test for pxb-cxl only.
qtests/cxl: Add initial root port and CXL type3 tests
hw/cxl/component: Add utils for interleave parameter encoding/decoding
hw/cxl/host: Add support for CXL Fixed Memory Windows.
hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxl
pci/pcie_port: Add pci_find_port_by_pn()
CXL/cxl_component: Add cxl_get_hb_cstate()
mem/cxl_type3: Add read and write functions for associated hostmem.
cxl/cxl-host: Add memops for CFMWS region.
i386/pc: Enable CXL fixed memory windows
tests/acpi: q35: Allow addition of a CXL test.
qtests/bios-tables-test: Add a test for CXL emulation.
tests/acpi: Add tables for CXL emulation.
hw/arm/virt: Basic CXL enablement on pci_expander_bridge instances
pxb-cxl
qtest/cxl: Add aarch64 virt test for CXL
docs/cxl: Add initial Compute eXpress Link (CXL) documentation.
pci-bridge/cxl_upstream: Add a CXL switch upstream port
pci-bridge/cxl_downstream: Add a CXL switch downstream port
docs/cxl: Add switch documentation
MAINTAINERS | 7 +
docs/system/device-emulation.rst | 1 +
docs/system/devices/cxl.rst | 386 ++++++++++++++++++++++
hw/Kconfig | 1 +
hw/acpi/Kconfig | 5 +
hw/acpi/cxl-stub.c | 12 +
hw/acpi/cxl.c | 257 +++++++++++++++
hw/acpi/meson.build | 4 +-
hw/arm/Kconfig | 1 +
hw/arm/virt-acpi-build.c | 33 ++
hw/arm/virt.c | 40 ++-
hw/core/machine.c | 28 ++
hw/cxl/Kconfig | 3 +
hw/cxl/cxl-component-utils.c | 396 +++++++++++++++++++++++
hw/cxl/cxl-device-utils.c | 265 +++++++++++++++
hw/cxl/cxl-host-stubs.c | 16 +
hw/cxl/cxl-host.c | 261 +++++++++++++++
hw/cxl/cxl-mailbox-utils.c | 478 ++++++++++++++++++++++++++++
hw/cxl/meson.build | 12 +
hw/i386/acpi-build.c | 57 +++-
hw/i386/pc.c | 57 +++-
hw/mem/Kconfig | 5 +
hw/mem/cxl_type3.c | 371 +++++++++++++++++++++
hw/mem/meson.build | 1 +
hw/meson.build | 1 +
hw/pci-bridge/Kconfig | 5 +
hw/pci-bridge/cxl_downstream.c | 249 +++++++++++++++
hw/pci-bridge/cxl_root_port.c | 236 ++++++++++++++
hw/pci-bridge/cxl_upstream.c | 216 +++++++++++++
hw/pci-bridge/meson.build | 1 +
hw/pci-bridge/pci_expander_bridge.c | 168 +++++++++-
hw/pci-bridge/pcie_root_port.c | 6 +-
hw/pci-host/gpex-acpi.c | 20 +-
hw/pci/pci.c | 21 +-
hw/pci/pcie_port.c | 25 ++
include/hw/acpi/cxl.h | 28 ++
include/hw/arm/virt.h | 1 +
include/hw/boards.h | 2 +
include/hw/cxl/cxl.h | 65 ++++
include/hw/cxl/cxl_component.h | 223 +++++++++++++
include/hw/cxl/cxl_device.h | 268 ++++++++++++++++
include/hw/cxl/cxl_pci.h | 167 ++++++++++
include/hw/pci/pci.h | 14 +
include/hw/pci/pci_bridge.h | 20 ++
include/hw/pci/pci_bus.h | 7 +
include/hw/pci/pci_ids.h | 1 +
include/hw/pci/pcie_port.h | 2 +
qapi/machine.json | 21 ++
qemu-options.hx | 38 +++
scripts/device-crash-test | 1 +
softmmu/vl.c | 47 +++
tests/data/acpi/q35/CEDT.cxl | Bin 0 -> 184 bytes
tests/data/acpi/q35/DSDT.cxl | Bin 0 -> 9615 bytes
tests/qtest/bios-tables-test.c | 44 +++
tests/qtest/cxl-test.c | 181 +++++++++++
tests/qtest/meson.build | 5 +
56 files changed, 4753 insertions(+), 27 deletions(-)
create mode 100644 docs/system/devices/cxl.rst
create mode 100644 hw/acpi/cxl-stub.c
create mode 100644 hw/acpi/cxl.c
create mode 100644 hw/cxl/Kconfig
create mode 100644 hw/cxl/cxl-component-utils.c
create mode 100644 hw/cxl/cxl-device-utils.c
create mode 100644 hw/cxl/cxl-host-stubs.c
create mode 100644 hw/cxl/cxl-host.c
create mode 100644 hw/cxl/cxl-mailbox-utils.c
create mode 100644 hw/cxl/meson.build
create mode 100644 hw/mem/cxl_type3.c
create mode 100644 hw/pci-bridge/cxl_downstream.c
create mode 100644 hw/pci-bridge/cxl_root_port.c
create mode 100644 hw/pci-bridge/cxl_upstream.c
create mode 100644 include/hw/acpi/cxl.h
create mode 100644 include/hw/cxl/cxl.h
create mode 100644 include/hw/cxl/cxl_component.h
create mode 100644 include/hw/cxl/cxl_device.h
create mode 100644 include/hw/cxl/cxl_pci.h
create mode 100644 tests/data/acpi/q35/CEDT.cxl
create mode 100644 tests/data/acpi/q35/DSDT.cxl
create mode 100644 tests/qtest/cxl-test.c
--
2.32.0
^ permalink raw reply [flat|nested] 100+ messages in thread* [PATCH v10 01/45] hw/pci/cxl: Add a CXL component type (interface)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
A CXL component is a hardware entity that implements CXL component
registers from the CXL 2.0 spec (8.2.3). Currently these represent 3
general types.
1. Host Bridge
2. Ports (root, upstream, downstream)
3. Devices (memory, other)
A CXL component can be conceptually thought of as a PCIe device with
extra functionality when enumerated and enabled. For this reason, CXL
does here, and will continue to add on to existing PCI code paths.
Host bridges will typically need to be handled specially and so they can
implement this newly introduced interface or not. All other components
should implement this interface. Implementing this interface allows the
core PCI code to treat these devices as special where appropriate.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
---
hw/pci/pci.c | 10 ++++++++++
include/hw/pci/pci.h | 8 ++++++++
2 files changed, 18 insertions(+)
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index e99417e501..08bd2db2ad 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -200,6 +200,11 @@ static const TypeInfo pci_bus_info = {
.class_init = pci_bus_class_init,
};
+static const TypeInfo cxl_interface_info = {
+ .name = INTERFACE_CXL_DEVICE,
+ .parent = TYPE_INTERFACE,
+};
+
static const TypeInfo pcie_interface_info = {
.name = INTERFACE_PCIE_DEVICE,
.parent = TYPE_INTERFACE,
@@ -2181,6 +2186,10 @@ static void pci_qdev_realize(DeviceState *qdev, Error **errp)
pci_dev->cap_present |= QEMU_PCI_CAP_EXPRESS;
}
+ if (object_class_dynamic_cast(klass, INTERFACE_CXL_DEVICE)) {
+ pci_dev->cap_present |= QEMU_PCIE_CAP_CXL;
+ }
+
pci_dev = do_pci_register_device(pci_dev,
object_get_typename(OBJECT(qdev)),
pci_dev->devfn, errp);
@@ -2937,6 +2946,7 @@ static void pci_register_types(void)
type_register_static(&pci_bus_info);
type_register_static(&pcie_bus_info);
type_register_static(&conventional_pci_interface_info);
+ type_register_static(&cxl_interface_info);
type_register_static(&pcie_interface_info);
type_register_static(&pci_device_type_info);
}
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index 3a32b8dd40..98f0d1b844 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -194,6 +194,8 @@ enum {
QEMU_PCIE_LNKSTA_DLLLA = (1 << QEMU_PCIE_LNKSTA_DLLLA_BITNR),
#define QEMU_PCIE_EXTCAP_INIT_BITNR 9
QEMU_PCIE_EXTCAP_INIT = (1 << QEMU_PCIE_EXTCAP_INIT_BITNR),
+#define QEMU_PCIE_CXL_BITNR 10
+ QEMU_PCIE_CAP_CXL = (1 << QEMU_PCIE_CXL_BITNR),
};
#define TYPE_PCI_DEVICE "pci-device"
@@ -201,6 +203,12 @@ typedef struct PCIDeviceClass PCIDeviceClass;
DECLARE_OBJ_CHECKERS(PCIDevice, PCIDeviceClass,
PCI_DEVICE, TYPE_PCI_DEVICE)
+/*
+ * Implemented by devices that can be plugged on CXL buses. In the spec, this is
+ * actually a "CXL Component, but we name it device to match the PCI naming.
+ */
+#define INTERFACE_CXL_DEVICE "cxl-device"
+
/* Implemented by devices that can be plugged on PCI Express buses */
#define INTERFACE_PCIE_DEVICE "pci-express-device"
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 01/45] hw/pci/cxl: Add a CXL component type (interface)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
A CXL component is a hardware entity that implements CXL component
registers from the CXL 2.0 spec (8.2.3). Currently these represent 3
general types.
1. Host Bridge
2. Ports (root, upstream, downstream)
3. Devices (memory, other)
A CXL component can be conceptually thought of as a PCIe device with
extra functionality when enumerated and enabled. For this reason, CXL
does here, and will continue to add on to existing PCI code paths.
Host bridges will typically need to be handled specially and so they can
implement this newly introduced interface or not. All other components
should implement this interface. Implementing this interface allows the
core PCI code to treat these devices as special where appropriate.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
---
hw/pci/pci.c | 10 ++++++++++
include/hw/pci/pci.h | 8 ++++++++
2 files changed, 18 insertions(+)
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index e99417e501..08bd2db2ad 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -200,6 +200,11 @@ static const TypeInfo pci_bus_info = {
.class_init = pci_bus_class_init,
};
+static const TypeInfo cxl_interface_info = {
+ .name = INTERFACE_CXL_DEVICE,
+ .parent = TYPE_INTERFACE,
+};
+
static const TypeInfo pcie_interface_info = {
.name = INTERFACE_PCIE_DEVICE,
.parent = TYPE_INTERFACE,
@@ -2181,6 +2186,10 @@ static void pci_qdev_realize(DeviceState *qdev, Error **errp)
pci_dev->cap_present |= QEMU_PCI_CAP_EXPRESS;
}
+ if (object_class_dynamic_cast(klass, INTERFACE_CXL_DEVICE)) {
+ pci_dev->cap_present |= QEMU_PCIE_CAP_CXL;
+ }
+
pci_dev = do_pci_register_device(pci_dev,
object_get_typename(OBJECT(qdev)),
pci_dev->devfn, errp);
@@ -2937,6 +2946,7 @@ static void pci_register_types(void)
type_register_static(&pci_bus_info);
type_register_static(&pcie_bus_info);
type_register_static(&conventional_pci_interface_info);
+ type_register_static(&cxl_interface_info);
type_register_static(&pcie_interface_info);
type_register_static(&pci_device_type_info);
}
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index 3a32b8dd40..98f0d1b844 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -194,6 +194,8 @@ enum {
QEMU_PCIE_LNKSTA_DLLLA = (1 << QEMU_PCIE_LNKSTA_DLLLA_BITNR),
#define QEMU_PCIE_EXTCAP_INIT_BITNR 9
QEMU_PCIE_EXTCAP_INIT = (1 << QEMU_PCIE_EXTCAP_INIT_BITNR),
+#define QEMU_PCIE_CXL_BITNR 10
+ QEMU_PCIE_CAP_CXL = (1 << QEMU_PCIE_CXL_BITNR),
};
#define TYPE_PCI_DEVICE "pci-device"
@@ -201,6 +203,12 @@ typedef struct PCIDeviceClass PCIDeviceClass;
DECLARE_OBJ_CHECKERS(PCIDevice, PCIDeviceClass,
PCI_DEVICE, TYPE_PCI_DEVICE)
+/*
+ * Implemented by devices that can be plugged on CXL buses. In the spec, this is
+ * actually a "CXL Component, but we name it device to match the PCI naming.
+ */
+#define INTERFACE_CXL_DEVICE "cxl-device"
+
/* Implemented by devices that can be plugged on PCI Express buses */
#define INTERFACE_PCIE_DEVICE "pci-express-device"
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 02/45] hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
A CXL 2.0 component is any entity in the CXL topology. All components
have a analogous function in PCIe. Except for the CXL host bridge, all
have a PCIe config space that is accessible via the common PCIe
mechanisms. CXL components are enumerated via DVSEC fields in the
extended PCIe header space. CXL components will minimally implement some
subset of CXL.mem and CXL.cache registers defined in 8.2.5 of the CXL
2.0 specification. Two headers and a utility library are introduced to
support the minimum functionality needed to enumerate components.
The cxl_pci header manages bits associated with PCI, specifically the
DVSEC and related fields. The cxl_component.h variant has data
structures and APIs that are useful for drivers implementing any of the
CXL 2.0 components. The library takes care of making use of the DVSEC
bits and the CXL.[mem|cache] registers. Per spec, the registers are
little endian.
None of the mechanisms required to enumerate a CXL capable hostbridge
are introduced at this point.
Note that the CXL.mem and CXL.cache registers used are always 4B wide.
It's possible in the future that this constraint will not hold.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
---
hw/Kconfig | 1 +
hw/cxl/Kconfig | 3 +
hw/cxl/cxl-component-utils.c | 313 +++++++++++++++++++++++++++++++++
hw/cxl/meson.build | 4 +
hw/meson.build | 1 +
include/hw/cxl/cxl.h | 16 ++
include/hw/cxl/cxl_component.h | 213 ++++++++++++++++++++++
include/hw/cxl/cxl_pci.h | 146 +++++++++++++++
8 files changed, 697 insertions(+)
diff --git a/hw/Kconfig b/hw/Kconfig
index ad20cce0a9..50e0952889 100644
--- a/hw/Kconfig
+++ b/hw/Kconfig
@@ -6,6 +6,7 @@ source audio/Kconfig
source block/Kconfig
source char/Kconfig
source core/Kconfig
+source cxl/Kconfig
source display/Kconfig
source dma/Kconfig
source gpio/Kconfig
diff --git a/hw/cxl/Kconfig b/hw/cxl/Kconfig
new file mode 100644
index 0000000000..8e67519b16
--- /dev/null
+++ b/hw/cxl/Kconfig
@@ -0,0 +1,3 @@
+config CXL
+ bool
+ default y if PCI_EXPRESS
diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
new file mode 100644
index 0000000000..9457a1b029
--- /dev/null
+++ b/hw/cxl/cxl-component-utils.c
@@ -0,0 +1,313 @@
+/*
+ * CXL Utility library for components
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/pci/pci.h"
+#include "hw/cxl/cxl.h"
+
+static uint64_t cxl_cache_mem_read_reg(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ CXLComponentState *cxl_cstate = opaque;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+
+ if (size == 8) {
+ qemu_log_mask(LOG_UNIMP,
+ "CXL 8 byte cache mem registers not implemented\n");
+ return 0;
+ }
+
+ if (cregs->special_ops && cregs->special_ops->read) {
+ return cregs->special_ops->read(cxl_cstate, offset, size);
+ } else {
+ return cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)];
+ }
+}
+
+static void cxl_cache_mem_write_reg(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size)
+{
+ CXLComponentState *cxl_cstate = opaque;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ uint32_t mask;
+
+ if (size == 8) {
+ qemu_log_mask(LOG_UNIMP,
+ "CXL 8 byte cache mem registers not implemented\n");
+ return;
+ }
+ mask = cregs->cache_mem_regs_write_mask[offset / sizeof(*cregs->cache_mem_regs_write_mask)];
+ value &= mask;
+ /* RO bits should remain constant. Done by reading existing value */
+ value |= ~mask & cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)];
+ if (cregs->special_ops && cregs->special_ops->write) {
+ cregs->special_ops->write(cxl_cstate, offset, value, size);
+ } else {
+ cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)] = value;
+ }
+}
+
+/*
+ * 8.2.3
+ * The access restrictions specified in Section 8.2.2 also apply to CXL 2.0
+ * Component Registers.
+ *
+ * 8.2.2
+ * • A 32 bit register shall be accessed as a 4 Bytes quantity. Partial
+ * reads are not permitted.
+ * • A 64 bit register shall be accessed as a 8 Bytes quantity. Partial
+ * reads are not permitted.
+ *
+ * As of the spec defined today, only 4 byte registers exist.
+ */
+static const MemoryRegionOps cache_mem_ops = {
+ .read = cxl_cache_mem_read_reg,
+ .write = cxl_cache_mem_write_reg,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 8,
+ .unaligned = false,
+ },
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 8,
+ },
+};
+
+void cxl_component_register_block_init(Object *obj,
+ CXLComponentState *cxl_cstate,
+ const char *type)
+{
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+
+ memory_region_init(&cregs->component_registers, obj, type,
+ CXL2_COMPONENT_BLOCK_SIZE);
+
+ /* io registers controls link which we don't care about in QEMU */
+ memory_region_init_io(&cregs->io, obj, NULL, cregs, ".io",
+ CXL2_COMPONENT_IO_REGION_SIZE);
+ memory_region_init_io(&cregs->cache_mem, obj, &cache_mem_ops, cregs,
+ ".cache_mem", CXL2_COMPONENT_CM_REGION_SIZE);
+
+ memory_region_add_subregion(&cregs->component_registers, 0, &cregs->io);
+ memory_region_add_subregion(&cregs->component_registers,
+ CXL2_COMPONENT_IO_REGION_SIZE,
+ &cregs->cache_mem);
+}
+
+static void ras_init_common(uint32_t *reg_state, uint32_t *write_msk)
+{
+ /*
+ * Error status is RW1C but given bits are not yet set, it can
+ * be handled as RO.
+ */
+ reg_state[R_CXL_RAS_UNC_ERR_STATUS] = 0;
+ /* Bits 12-13 and 17-31 reserved in CXL 2.0 */
+ reg_state[R_CXL_RAS_UNC_ERR_MASK] = 0x1cfff;
+ write_msk[R_CXL_RAS_UNC_ERR_MASK] = 0x1cfff;
+ reg_state[R_CXL_RAS_UNC_ERR_SEVERITY] = 0x1cfff;
+ write_msk[R_CXL_RAS_UNC_ERR_SEVERITY] = 0x1cfff;
+ reg_state[R_CXL_RAS_COR_ERR_STATUS] = 0;
+ reg_state[R_CXL_RAS_COR_ERR_MASK] = 0x7f;
+ write_msk[R_CXL_RAS_COR_ERR_MASK] = 0x7f;
+ /* CXL switches and devices must set */
+ reg_state[R_CXL_RAS_ERR_CAP_CTRL] = 0x00;
+}
+
+static void hdm_init_common(uint32_t *reg_state, uint32_t *write_msk)
+{
+ int decoder_count = 1;
+ int i;
+
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, DECODER_COUNT,
+ cxl_decoder_count_enc(decoder_count));
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 1);
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, INTERLEAVE_256B, 1);
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, INTERLEAVE_4K, 1);
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, POISON_ON_ERR_CAP, 0);
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_GLOBAL_CONTROL,
+ HDM_DECODER_ENABLE, 0);
+ write_msk[R_CXL_HDM_DECODER_GLOBAL_CONTROL] = 0x3;
+ for (i = 0; i < decoder_count; i++) {
+ write_msk[R_CXL_HDM_DECODER0_BASE_LO + i * 0x20] = 0xf0000000;
+ write_msk[R_CXL_HDM_DECODER0_BASE_HI + i * 0x20] = 0xffffffff;
+ write_msk[R_CXL_HDM_DECODER0_SIZE_LO + i * 0x20] = 0xf0000000;
+ write_msk[R_CXL_HDM_DECODER0_SIZE_HI + i * 0x20] = 0xffffffff;
+ write_msk[R_CXL_HDM_DECODER0_CTRL + i * 0x20] = 0x13ff;
+ }
+}
+
+void cxl_component_register_init_common(uint32_t *reg_state, uint32_t *write_msk,
+ enum reg_type type)
+{
+ int caps = 0;
+
+ /*
+ * In CXL 2.0 the capabilities required for each CXL component are such that,
+ * with the ordering chosen here, a single number can be used to define
+ * which capabilities should be provided.
+ */
+ switch (type) {
+ case CXL2_DOWNSTREAM_PORT:
+ case CXL2_DEVICE:
+ /* RAS, Link */
+ caps = 2;
+ break;
+ case CXL2_UPSTREAM_PORT:
+ case CXL2_TYPE3_DEVICE:
+ case CXL2_LOGICAL_DEVICE:
+ /* + HDM */
+ caps = 3;
+ break;
+ case CXL2_ROOT_PORT:
+ /* + Extended Security, + Snoop */
+ caps = 5;
+ break;
+ default:
+ abort();
+ }
+
+ memset(reg_state, 0, CXL2_COMPONENT_CM_REGION_SIZE);
+
+ /* CXL Capability Header Register */
+ ARRAY_FIELD_DP32(reg_state, CXL_CAPABILITY_HEADER, ID, 1);
+ ARRAY_FIELD_DP32(reg_state, CXL_CAPABILITY_HEADER, VERSION, 1);
+ ARRAY_FIELD_DP32(reg_state, CXL_CAPABILITY_HEADER, CACHE_MEM_VERSION, 1);
+ ARRAY_FIELD_DP32(reg_state, CXL_CAPABILITY_HEADER, ARRAY_SIZE, caps);
+
+#define init_cap_reg(reg, id, version) \
+ QEMU_BUILD_BUG_ON(CXL_##reg##_REGISTERS_OFFSET == 0); \
+ do { \
+ int which = R_CXL_##reg##_CAPABILITY_HEADER; \
+ reg_state[which] = FIELD_DP32(reg_state[which], \
+ CXL_##reg##_CAPABILITY_HEADER, ID, id); \
+ reg_state[which] = \
+ FIELD_DP32(reg_state[which], CXL_##reg##_CAPABILITY_HEADER, \
+ VERSION, version); \
+ reg_state[which] = \
+ FIELD_DP32(reg_state[which], CXL_##reg##_CAPABILITY_HEADER, PTR, \
+ CXL_##reg##_REGISTERS_OFFSET); \
+ } while (0)
+
+ init_cap_reg(RAS, 2, 2);
+ ras_init_common(reg_state, write_msk);
+
+ init_cap_reg(LINK, 4, 2);
+
+ if (caps < 3) {
+ return;
+ }
+
+ init_cap_reg(HDM, 5, 1);
+ hdm_init_common(reg_state, write_msk);
+
+ if (caps < 5) {
+ return;
+ }
+
+ init_cap_reg(EXTSEC, 6, 1);
+ init_cap_reg(SNOOP, 8, 1);
+
+#undef init_cap_reg
+}
+
+/*
+ * Helper to creates a DVSEC header for a CXL entity. The caller is responsible
+ * for tracking the valid offset.
+ *
+ * This function will build the DVSEC header on behalf of the caller and then
+ * copy in the remaining data for the vendor specific bits.
+ * It will also set up appropriate write masks.
+ */
+void cxl_component_create_dvsec(CXLComponentState *cxl,
+ enum reg_type cxl_dev_type, uint16_t length,
+ uint16_t type, uint8_t rev, uint8_t *body)
+{
+ PCIDevice *pdev = cxl->pdev;
+ uint16_t offset = cxl->dvsec_offset;
+ uint8_t *wmask = pdev->wmask;
+
+ assert(offset >= PCI_CFG_SPACE_SIZE &&
+ ((offset + length) < PCI_CFG_SPACE_EXP_SIZE));
+ assert((length & 0xf000) == 0);
+ assert((rev & ~0xf) == 0);
+
+ /* Create the DVSEC in the MCFG space */
+ pcie_add_capability(pdev, PCI_EXT_CAP_ID_DVSEC, 1, offset, length);
+ pci_set_long(pdev->config + offset + PCIE_DVSEC_HEADER1_OFFSET,
+ (length << 20) | (rev << 16) | CXL_VENDOR_ID);
+ pci_set_word(pdev->config + offset + PCIE_DVSEC_ID_OFFSET, type);
+ memcpy(pdev->config + offset + sizeof(DVSECHeader),
+ body + sizeof(DVSECHeader),
+ length - sizeof(DVSECHeader));
+
+ /* Configure write masks */
+ switch (type) {
+ case PCIE_CXL_DEVICE_DVSEC:
+ break;
+ case NON_CXL_FUNCTION_MAP_DVSEC:
+ break; /* Not yet implemented */
+ case EXTENSIONS_PORT_DVSEC:
+ wmask[offset + offsetof(CXLDVSECPortExtensions, control)] = 0x0F;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, control) + 1] = 0x40;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_bus_base)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_bus_limit)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_memory_base)] = 0xF0;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_memory_base) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_memory_limit)] = 0xF0;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_memory_limit) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_base)] = 0xF0;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_base) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_limit)] = 0xF0;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_limit) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_base_high)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_base_high) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_base_high) + 2] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_base_high) + 3] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_limit_high)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_limit_high) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_limit_high) + 2] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_limit_high) + 3] = 0xFF;
+ break;
+ case GPF_PORT_DVSEC:
+ wmask[offset + offsetof(CXLDVSECPortGPF, phase1_ctrl)] = 0x0F;
+ wmask[offset + offsetof(CXLDVSECPortGPF, phase1_ctrl) + 1] = 0x0F;
+ wmask[offset + offsetof(CXLDVSECPortGPF, phase2_ctrl)] = 0x0F;
+ wmask[offset + offsetof(CXLDVSECPortGPF, phase2_ctrl) + 1] = 0x0F;
+ break;
+ case GPF_DEVICE_DVSEC:
+ wmask[offset + offsetof(CXLDVSECDeviceGPF, phase2_duration)] = 0x0F;
+ wmask[offset + offsetof(CXLDVSECDeviceGPF, phase2_duration) + 1] = 0x0F;
+ wmask[offset + offsetof(CXLDVSECDeviceGPF, phase2_power)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDeviceGPF, phase2_power) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDeviceGPF, phase2_power) + 2] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDeviceGPF, phase2_power) + 3] = 0xFF;
+ break;
+ case PCIE_FLEXBUS_PORT_DVSEC:
+ switch (cxl_dev_type) {
+ case CXL2_ROOT_PORT:
+ /* No MLD */
+ wmask[offset + offsetof(CXLDVSECPortFlexBus, ctrl)] = 0xbd;
+ break;
+ case CXL2_DOWNSTREAM_PORT:
+ wmask[offset + offsetof(CXLDVSECPortFlexBus, ctrl)] = 0xfd;
+ break;
+ default: /* Registers are RO for other component types */
+ break;
+ }
+ /* There are rw1cs bits in the status register but never set currently */
+ break;
+ }
+
+ /* Update state for future DVSEC additions */
+ range_init_nofail(&cxl->dvsecs[type], cxl->dvsec_offset, length);
+ cxl->dvsec_offset += length;
+}
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
new file mode 100644
index 0000000000..3231b5de1e
--- /dev/null
+++ b/hw/cxl/meson.build
@@ -0,0 +1,4 @@
+softmmu_ss.add(when: 'CONFIG_CXL',
+ if_true: files(
+ 'cxl-component-utils.c',
+ ))
diff --git a/hw/meson.build b/hw/meson.build
index b3366c888e..9992c5101e 100644
--- a/hw/meson.build
+++ b/hw/meson.build
@@ -6,6 +6,7 @@ subdir('block')
subdir('char')
subdir('core')
subdir('cpu')
+subdir('cxl')
subdir('display')
subdir('dma')
subdir('gpio')
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
new file mode 100644
index 0000000000..8c738c7a2b
--- /dev/null
+++ b/include/hw/cxl/cxl.h
@@ -0,0 +1,16 @@
+/*
+ * QEMU CXL Support
+ *
+ * Copyright (c) 2020 Intel
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#ifndef CXL_H
+#define CXL_H
+
+#include "cxl_pci.h"
+#include "cxl_component.h"
+
+#endif
diff --git a/include/hw/cxl/cxl_component.h b/include/hw/cxl/cxl_component.h
new file mode 100644
index 0000000000..7d8f395cbe
--- /dev/null
+++ b/include/hw/cxl/cxl_component.h
@@ -0,0 +1,213 @@
+/*
+ * QEMU CXL Component
+ *
+ * Copyright (c) 2020 Intel
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#ifndef CXL_COMPONENT_H
+#define CXL_COMPONENT_H
+
+/* CXL 2.0 - 8.2.4 */
+#define CXL2_COMPONENT_IO_REGION_SIZE 0x1000
+#define CXL2_COMPONENT_CM_REGION_SIZE 0x1000
+#define CXL2_COMPONENT_BLOCK_SIZE 0x10000
+
+#include "qemu/compiler.h"
+#include "qemu/range.h"
+#include "qemu/typedefs.h"
+#include "hw/register.h"
+
+enum reg_type {
+ CXL2_DEVICE,
+ CXL2_TYPE3_DEVICE,
+ CXL2_LOGICAL_DEVICE,
+ CXL2_ROOT_PORT,
+ CXL2_UPSTREAM_PORT,
+ CXL2_DOWNSTREAM_PORT
+};
+
+/*
+ * Capability registers are defined at the top of the CXL.cache/mem region and
+ * are packed. For our purposes we will always define the caps in the same
+ * order.
+ * CXL 2.0 - 8.2.5 Table 142 for details.
+ */
+
+/* CXL 2.0 - 8.2.5.1 */
+REG32(CXL_CAPABILITY_HEADER, 0)
+ FIELD(CXL_CAPABILITY_HEADER, ID, 0, 16)
+ FIELD(CXL_CAPABILITY_HEADER, VERSION, 16, 4)
+ FIELD(CXL_CAPABILITY_HEADER, CACHE_MEM_VERSION, 20, 4)
+ FIELD(CXL_CAPABILITY_HEADER, ARRAY_SIZE, 24, 8)
+
+#define CXLx_CAPABILITY_HEADER(type, offset) \
+ REG32(CXL_##type##_CAPABILITY_HEADER, offset) \
+ FIELD(CXL_##type##_CAPABILITY_HEADER, ID, 0, 16) \
+ FIELD(CXL_##type##_CAPABILITY_HEADER, VERSION, 16, 4) \
+ FIELD(CXL_##type##_CAPABILITY_HEADER, PTR, 20, 12)
+CXLx_CAPABILITY_HEADER(RAS, 0x4)
+CXLx_CAPABILITY_HEADER(LINK, 0x8)
+CXLx_CAPABILITY_HEADER(HDM, 0xc)
+CXLx_CAPABILITY_HEADER(EXTSEC, 0x10)
+CXLx_CAPABILITY_HEADER(SNOOP, 0x14)
+
+/*
+ * Capability structures contain the actual registers that the CXL component
+ * implements. Some of these are specific to certain types of components, but
+ * this implementation leaves enough space regardless.
+ */
+/* 8.2.5.9 - CXL RAS Capability Structure */
+
+/* Give ample space for caps before this */
+#define CXL_RAS_REGISTERS_OFFSET 0x80
+#define CXL_RAS_REGISTERS_SIZE 0x58
+REG32(CXL_RAS_UNC_ERR_STATUS, CXL_RAS_REGISTERS_OFFSET)
+REG32(CXL_RAS_UNC_ERR_MASK, CXL_RAS_REGISTERS_OFFSET + 0x4)
+REG32(CXL_RAS_UNC_ERR_SEVERITY, CXL_RAS_REGISTERS_OFFSET + 0x8)
+REG32(CXL_RAS_COR_ERR_STATUS, CXL_RAS_REGISTERS_OFFSET + 0xc)
+REG32(CXL_RAS_COR_ERR_MASK, CXL_RAS_REGISTERS_OFFSET + 0x10)
+REG32(CXL_RAS_ERR_CAP_CTRL, CXL_RAS_REGISTERS_OFFSET + 0x14)
+/* Offset 0x18 - 0x58 reserved for RAS logs */
+
+/* 8.2.5.10 - CXL Security Capability Structure */
+#define CXL_SEC_REGISTERS_OFFSET \
+ (CXL_RAS_REGISTERS_OFFSET + CXL_RAS_REGISTERS_SIZE)
+#define CXL_SEC_REGISTERS_SIZE 0 /* We don't implement 1.1 downstream ports */
+
+/* 8.2.5.11 - CXL Link Capability Structure */
+#define CXL_LINK_REGISTERS_OFFSET \
+ (CXL_SEC_REGISTERS_OFFSET + CXL_SEC_REGISTERS_SIZE)
+#define CXL_LINK_REGISTERS_SIZE 0x38
+
+/* 8.2.5.12 - CXL HDM Decoder Capability Structure */
+#define HDM_DECODE_MAX 10 /* 8.2.5.12.1 */
+#define CXL_HDM_REGISTERS_OFFSET \
+ (CXL_LINK_REGISTERS_OFFSET + CXL_LINK_REGISTERS_SIZE)
+#define CXL_HDM_REGISTERS_SIZE (0x10 + 0x20 * HDM_DECODE_MAX)
+#define HDM_DECODER_INIT(n) \
+ REG32(CXL_HDM_DECODER##n##_BASE_LO, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x10) \
+ FIELD(CXL_HDM_DECODER##n##_BASE_LO, L, 28, 4) \
+ REG32(CXL_HDM_DECODER##n##_BASE_HI, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x14) \
+ REG32(CXL_HDM_DECODER##n##_SIZE_LO, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x18) \
+ REG32(CXL_HDM_DECODER##n##_SIZE_HI, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x1C) \
+ REG32(CXL_HDM_DECODER##n##_CTRL, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x20) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, IG, 0, 4) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, IW, 4, 4) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, LOCK_ON_COMMIT, 8, 1) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, COMMIT, 9, 1) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, COMMITTED, 10, 1) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, ERR, 11, 1) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, TYPE, 12, 1) \
+ REG32(CXL_HDM_DECODER##n##_TARGET_LIST_LO, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x24) \
+ REG32(CXL_HDM_DECODER##n##_TARGET_LIST_HI, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x28)
+
+REG32(CXL_HDM_DECODER_CAPABILITY, CXL_HDM_REGISTERS_OFFSET)
+ FIELD(CXL_HDM_DECODER_CAPABILITY, DECODER_COUNT, 0, 4)
+ FIELD(CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 4, 4)
+ FIELD(CXL_HDM_DECODER_CAPABILITY, INTERLEAVE_256B, 8, 1)
+ FIELD(CXL_HDM_DECODER_CAPABILITY, INTERLEAVE_4K, 9, 1)
+ FIELD(CXL_HDM_DECODER_CAPABILITY, POISON_ON_ERR_CAP, 10, 1)
+REG32(CXL_HDM_DECODER_GLOBAL_CONTROL, CXL_HDM_REGISTERS_OFFSET + 4)
+ FIELD(CXL_HDM_DECODER_GLOBAL_CONTROL, POISON_ON_ERR_EN, 0, 1)
+ FIELD(CXL_HDM_DECODER_GLOBAL_CONTROL, HDM_DECODER_ENABLE, 1, 1)
+
+HDM_DECODER_INIT(0);
+
+/* 8.2.5.13 - CXL Extended Security Capability Structure (Root complex only) */
+#define EXTSEC_ENTRY_MAX 256
+#define CXL_EXTSEC_REGISTERS_OFFSET \
+ (CXL_HDM_REGISTERS_OFFSET + CXL_HDM_REGISTERS_SIZE)
+#define CXL_EXTSEC_REGISTERS_SIZE (8 * EXTSEC_ENTRY_MAX + 4)
+
+/* 8.2.5.14 - CXL IDE Capability Structure */
+#define CXL_IDE_REGISTERS_OFFSET \
+ (CXL_EXTSEC_REGISTERS_OFFSET + CXL_EXTSEC_REGISTERS_SIZE)
+#define CXL_IDE_REGISTERS_SIZE 0x20
+
+/* 8.2.5.15 - CXL Snoop Filter Capability Structure */
+#define CXL_SNOOP_REGISTERS_OFFSET \
+ (CXL_IDE_REGISTERS_OFFSET + CXL_IDE_REGISTERS_SIZE)
+#define CXL_SNOOP_REGISTERS_SIZE 0x8
+
+QEMU_BUILD_BUG_MSG((CXL_SNOOP_REGISTERS_OFFSET + CXL_SNOOP_REGISTERS_SIZE) >= 0x1000,
+ "No space for registers");
+
+typedef struct component_registers {
+ /*
+ * Main memory region to be registered with QEMU core.
+ */
+ MemoryRegion component_registers;
+
+ /*
+ * 8.2.4 Table 141:
+ * 0x0000 - 0x0fff CXL.io registers
+ * 0x1000 - 0x1fff CXL.cache and CXL.mem
+ * 0x2000 - 0xdfff Implementation specific
+ * 0xe000 - 0xe3ff CXL ARB/MUX registers
+ * 0xe400 - 0xffff RSVD
+ */
+ uint32_t io_registers[CXL2_COMPONENT_IO_REGION_SIZE >> 2];
+ MemoryRegion io;
+
+ uint32_t cache_mem_registers[CXL2_COMPONENT_CM_REGION_SIZE >> 2];
+ uint32_t cache_mem_regs_write_mask[CXL2_COMPONENT_CM_REGION_SIZE >> 2];
+ MemoryRegion cache_mem;
+
+ MemoryRegion impl_specific;
+ MemoryRegion arb_mux;
+ MemoryRegion rsvd;
+
+ /* special_ops is used for any component that needs any specific handling */
+ MemoryRegionOps *special_ops;
+} ComponentRegisters;
+
+/*
+ * A CXL component represents all entities in a CXL hierarchy. This includes,
+ * host bridges, root ports, upstream/downstream switch ports, and devices
+ */
+typedef struct cxl_component {
+ ComponentRegisters crb;
+ union {
+ struct {
+ Range dvsecs[CXL20_MAX_DVSEC];
+ uint16_t dvsec_offset;
+ struct PCIDevice *pdev;
+ };
+ };
+} CXLComponentState;
+
+void cxl_component_register_block_init(Object *obj,
+ CXLComponentState *cxl_cstate,
+ const char *type);
+void cxl_component_register_init_common(uint32_t *reg_state,
+ uint32_t *write_msk,
+ enum reg_type type);
+
+void cxl_component_create_dvsec(CXLComponentState *cxl_cstate,
+ enum reg_type cxl_dev_type, uint16_t length,
+ uint16_t type, uint8_t rev, uint8_t *body);
+
+static inline int cxl_decoder_count_enc(int count)
+{
+ switch (count) {
+ case 1: return 0;
+ case 2: return 1;
+ case 4: return 2;
+ case 6: return 3;
+ case 8: return 4;
+ case 10: return 5;
+ }
+ return 0;
+}
+
+#endif
diff --git a/include/hw/cxl/cxl_pci.h b/include/hw/cxl/cxl_pci.h
new file mode 100644
index 0000000000..3f7e44daac
--- /dev/null
+++ b/include/hw/cxl/cxl_pci.h
@@ -0,0 +1,146 @@
+/*
+ * QEMU CXL PCI interfaces
+ *
+ * Copyright (c) 2020 Intel
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#ifndef CXL_PCI_H
+#define CXL_PCI_H
+
+#include "qemu/compiler.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pcie.h"
+
+#define CXL_VENDOR_ID 0x1e98
+
+#define PCIE_DVSEC_HEADER1_OFFSET 0x4 /* Offset from start of extend cap */
+#define PCIE_DVSEC_ID_OFFSET 0x8
+
+#define PCIE_CXL_DEVICE_DVSEC_LENGTH 0x38
+#define PCIE_CXL1_DEVICE_DVSEC_REVID 0
+#define PCIE_CXL2_DEVICE_DVSEC_REVID 1
+
+#define EXTENSIONS_PORT_DVSEC_LENGTH 0x28
+#define EXTENSIONS_PORT_DVSEC_REVID 0
+
+#define GPF_PORT_DVSEC_LENGTH 0x10
+#define GPF_PORT_DVSEC_REVID 0
+
+#define GPF_DEVICE_DVSEC_LENGTH 0x10
+#define GPF_DEVICE_DVSEC_REVID 0
+
+#define PCIE_FLEXBUS_PORT_DVSEC_LENGTH_2_0 0x14
+#define PCIE_FLEXBUS_PORT_DVSEC_REVID_2_0 1
+
+#define REG_LOC_DVSEC_LENGTH 0x24
+#define REG_LOC_DVSEC_REVID 0
+
+enum {
+ PCIE_CXL_DEVICE_DVSEC = 0,
+ NON_CXL_FUNCTION_MAP_DVSEC = 2,
+ EXTENSIONS_PORT_DVSEC = 3,
+ GPF_PORT_DVSEC = 4,
+ GPF_DEVICE_DVSEC = 5,
+ PCIE_FLEXBUS_PORT_DVSEC = 7,
+ REG_LOC_DVSEC = 8,
+ MLD_DVSEC = 9,
+ CXL20_MAX_DVSEC
+};
+
+typedef struct DVSECHeader {
+ uint32_t cap_hdr;
+ uint32_t dv_hdr1;
+ uint16_t dv_hdr2;
+} QEMU_PACKED DVSECHeader;
+QEMU_BUILD_BUG_ON(sizeof(DVSECHeader) != 10);
+
+/*
+ * CXL 2.0 devices must implement certain DVSEC IDs, and can [optionally]
+ * implement others.
+ *
+ * CXL 2.0 Device: 0, [2], 5, 8
+ * CXL 2.0 RP: 3, 4, 7, 8
+ * CXL 2.0 Upstream Port: [2], 7, 8
+ * CXL 2.0 Downstream Port: 3, 4, 7, 8
+ */
+
+/* CXL 2.0 - 8.1.5 (ID 0003) */
+typedef struct CXLDVSECPortExtensions {
+ DVSECHeader hdr;
+ uint16_t status;
+ uint16_t control;
+ uint8_t alt_bus_base;
+ uint8_t alt_bus_limit;
+ uint16_t alt_memory_base;
+ uint16_t alt_memory_limit;
+ uint16_t alt_prefetch_base;
+ uint16_t alt_prefetch_limit;
+ uint32_t alt_prefetch_base_high;
+ uint32_t alt_prefetch_limit_high;
+ uint32_t rcrb_base;
+ uint32_t rcrb_base_high;
+} CXLDVSECPortExtensions;
+QEMU_BUILD_BUG_ON(sizeof(CXLDVSECPortExtensions) != 0x28);
+
+#define PORT_CONTROL_OFFSET 0xc
+#define PORT_CONTROL_UNMASK_SBR 1
+#define PORT_CONTROL_ALT_MEMID_EN 4
+
+/* CXL 2.0 - 8.1.6 GPF DVSEC (ID 0004) */
+typedef struct CXLDVSECPortGPF {
+ DVSECHeader hdr;
+ uint16_t rsvd;
+ uint16_t phase1_ctrl;
+ uint16_t phase2_ctrl;
+} CXLDVSECPortGPF;
+QEMU_BUILD_BUG_ON(sizeof(CXLDVSECPortGPF) != 0x10);
+
+/* CXL 2.0 - 8.1.7 GPF DVSEC for CXL Device */
+typedef struct CXLDVSECDeviceGPF {
+ DVSECHeader hdr;
+ uint16_t phase2_duration;
+ uint32_t phase2_power;
+} CXLDVSECDeviceGPF;
+QEMU_BUILD_BUG_ON(sizeof(CXLDVSECDeviceGPF) != 0x10);
+
+/* CXL 2.0 - 8.1.8/8.2.1.3 Flex Bus DVSEC (ID 0007) */
+typedef struct CXLDVSECPortFlexBus {
+ DVSECHeader hdr;
+ uint16_t cap;
+ uint16_t ctrl;
+ uint16_t status;
+ uint32_t rcvd_mod_ts_data_phase1;
+} CXLDVSECPortFlexBus;
+QEMU_BUILD_BUG_ON(sizeof(CXLDVSECPortFlexBus) != 0x14);
+
+/* CXL 2.0 - 8.1.9 Register Locator DVSEC (ID 0008) */
+typedef struct CXLDVSECRegisterLocator {
+ DVSECHeader hdr;
+ uint16_t rsvd;
+ uint32_t reg0_base_lo;
+ uint32_t reg0_base_hi;
+ uint32_t reg1_base_lo;
+ uint32_t reg1_base_hi;
+ uint32_t reg2_base_lo;
+ uint32_t reg2_base_hi;
+} CXLDVSECRegisterLocator;
+QEMU_BUILD_BUG_ON(sizeof(CXLDVSECRegisterLocator) != 0x24);
+
+/* BAR Equivalence Indicator */
+#define BEI_BAR_10H 0
+#define BEI_BAR_14H 1
+#define BEI_BAR_18H 2
+#define BEI_BAR_1cH 3
+#define BEI_BAR_20H 4
+#define BEI_BAR_24H 5
+
+/* Register Block Identifier */
+#define RBI_EMPTY 0
+#define RBI_COMPONENT_REG (1 << 8)
+#define RBI_BAR_VIRT_ACL (2 << 8)
+#define RBI_CXL_DEVICE_REG (3 << 8)
+
+#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 02/45] hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
A CXL 2.0 component is any entity in the CXL topology. All components
have a analogous function in PCIe. Except for the CXL host bridge, all
have a PCIe config space that is accessible via the common PCIe
mechanisms. CXL components are enumerated via DVSEC fields in the
extended PCIe header space. CXL components will minimally implement some
subset of CXL.mem and CXL.cache registers defined in 8.2.5 of the CXL
2.0 specification. Two headers and a utility library are introduced to
support the minimum functionality needed to enumerate components.
The cxl_pci header manages bits associated with PCI, specifically the
DVSEC and related fields. The cxl_component.h variant has data
structures and APIs that are useful for drivers implementing any of the
CXL 2.0 components. The library takes care of making use of the DVSEC
bits and the CXL.[mem|cache] registers. Per spec, the registers are
little endian.
None of the mechanisms required to enumerate a CXL capable hostbridge
are introduced at this point.
Note that the CXL.mem and CXL.cache registers used are always 4B wide.
It's possible in the future that this constraint will not hold.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
---
hw/Kconfig | 1 +
hw/cxl/Kconfig | 3 +
hw/cxl/cxl-component-utils.c | 313 +++++++++++++++++++++++++++++++++
hw/cxl/meson.build | 4 +
hw/meson.build | 1 +
include/hw/cxl/cxl.h | 16 ++
include/hw/cxl/cxl_component.h | 213 ++++++++++++++++++++++
include/hw/cxl/cxl_pci.h | 146 +++++++++++++++
8 files changed, 697 insertions(+)
diff --git a/hw/Kconfig b/hw/Kconfig
index ad20cce0a9..50e0952889 100644
--- a/hw/Kconfig
+++ b/hw/Kconfig
@@ -6,6 +6,7 @@ source audio/Kconfig
source block/Kconfig
source char/Kconfig
source core/Kconfig
+source cxl/Kconfig
source display/Kconfig
source dma/Kconfig
source gpio/Kconfig
diff --git a/hw/cxl/Kconfig b/hw/cxl/Kconfig
new file mode 100644
index 0000000000..8e67519b16
--- /dev/null
+++ b/hw/cxl/Kconfig
@@ -0,0 +1,3 @@
+config CXL
+ bool
+ default y if PCI_EXPRESS
diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
new file mode 100644
index 0000000000..9457a1b029
--- /dev/null
+++ b/hw/cxl/cxl-component-utils.c
@@ -0,0 +1,313 @@
+/*
+ * CXL Utility library for components
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/pci/pci.h"
+#include "hw/cxl/cxl.h"
+
+static uint64_t cxl_cache_mem_read_reg(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ CXLComponentState *cxl_cstate = opaque;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+
+ if (size == 8) {
+ qemu_log_mask(LOG_UNIMP,
+ "CXL 8 byte cache mem registers not implemented\n");
+ return 0;
+ }
+
+ if (cregs->special_ops && cregs->special_ops->read) {
+ return cregs->special_ops->read(cxl_cstate, offset, size);
+ } else {
+ return cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)];
+ }
+}
+
+static void cxl_cache_mem_write_reg(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size)
+{
+ CXLComponentState *cxl_cstate = opaque;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ uint32_t mask;
+
+ if (size == 8) {
+ qemu_log_mask(LOG_UNIMP,
+ "CXL 8 byte cache mem registers not implemented\n");
+ return;
+ }
+ mask = cregs->cache_mem_regs_write_mask[offset / sizeof(*cregs->cache_mem_regs_write_mask)];
+ value &= mask;
+ /* RO bits should remain constant. Done by reading existing value */
+ value |= ~mask & cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)];
+ if (cregs->special_ops && cregs->special_ops->write) {
+ cregs->special_ops->write(cxl_cstate, offset, value, size);
+ } else {
+ cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)] = value;
+ }
+}
+
+/*
+ * 8.2.3
+ * The access restrictions specified in Section 8.2.2 also apply to CXL 2.0
+ * Component Registers.
+ *
+ * 8.2.2
+ * • A 32 bit register shall be accessed as a 4 Bytes quantity. Partial
+ * reads are not permitted.
+ * • A 64 bit register shall be accessed as a 8 Bytes quantity. Partial
+ * reads are not permitted.
+ *
+ * As of the spec defined today, only 4 byte registers exist.
+ */
+static const MemoryRegionOps cache_mem_ops = {
+ .read = cxl_cache_mem_read_reg,
+ .write = cxl_cache_mem_write_reg,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 8,
+ .unaligned = false,
+ },
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 8,
+ },
+};
+
+void cxl_component_register_block_init(Object *obj,
+ CXLComponentState *cxl_cstate,
+ const char *type)
+{
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+
+ memory_region_init(&cregs->component_registers, obj, type,
+ CXL2_COMPONENT_BLOCK_SIZE);
+
+ /* io registers controls link which we don't care about in QEMU */
+ memory_region_init_io(&cregs->io, obj, NULL, cregs, ".io",
+ CXL2_COMPONENT_IO_REGION_SIZE);
+ memory_region_init_io(&cregs->cache_mem, obj, &cache_mem_ops, cregs,
+ ".cache_mem", CXL2_COMPONENT_CM_REGION_SIZE);
+
+ memory_region_add_subregion(&cregs->component_registers, 0, &cregs->io);
+ memory_region_add_subregion(&cregs->component_registers,
+ CXL2_COMPONENT_IO_REGION_SIZE,
+ &cregs->cache_mem);
+}
+
+static void ras_init_common(uint32_t *reg_state, uint32_t *write_msk)
+{
+ /*
+ * Error status is RW1C but given bits are not yet set, it can
+ * be handled as RO.
+ */
+ reg_state[R_CXL_RAS_UNC_ERR_STATUS] = 0;
+ /* Bits 12-13 and 17-31 reserved in CXL 2.0 */
+ reg_state[R_CXL_RAS_UNC_ERR_MASK] = 0x1cfff;
+ write_msk[R_CXL_RAS_UNC_ERR_MASK] = 0x1cfff;
+ reg_state[R_CXL_RAS_UNC_ERR_SEVERITY] = 0x1cfff;
+ write_msk[R_CXL_RAS_UNC_ERR_SEVERITY] = 0x1cfff;
+ reg_state[R_CXL_RAS_COR_ERR_STATUS] = 0;
+ reg_state[R_CXL_RAS_COR_ERR_MASK] = 0x7f;
+ write_msk[R_CXL_RAS_COR_ERR_MASK] = 0x7f;
+ /* CXL switches and devices must set */
+ reg_state[R_CXL_RAS_ERR_CAP_CTRL] = 0x00;
+}
+
+static void hdm_init_common(uint32_t *reg_state, uint32_t *write_msk)
+{
+ int decoder_count = 1;
+ int i;
+
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, DECODER_COUNT,
+ cxl_decoder_count_enc(decoder_count));
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 1);
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, INTERLEAVE_256B, 1);
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, INTERLEAVE_4K, 1);
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, POISON_ON_ERR_CAP, 0);
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_GLOBAL_CONTROL,
+ HDM_DECODER_ENABLE, 0);
+ write_msk[R_CXL_HDM_DECODER_GLOBAL_CONTROL] = 0x3;
+ for (i = 0; i < decoder_count; i++) {
+ write_msk[R_CXL_HDM_DECODER0_BASE_LO + i * 0x20] = 0xf0000000;
+ write_msk[R_CXL_HDM_DECODER0_BASE_HI + i * 0x20] = 0xffffffff;
+ write_msk[R_CXL_HDM_DECODER0_SIZE_LO + i * 0x20] = 0xf0000000;
+ write_msk[R_CXL_HDM_DECODER0_SIZE_HI + i * 0x20] = 0xffffffff;
+ write_msk[R_CXL_HDM_DECODER0_CTRL + i * 0x20] = 0x13ff;
+ }
+}
+
+void cxl_component_register_init_common(uint32_t *reg_state, uint32_t *write_msk,
+ enum reg_type type)
+{
+ int caps = 0;
+
+ /*
+ * In CXL 2.0 the capabilities required for each CXL component are such that,
+ * with the ordering chosen here, a single number can be used to define
+ * which capabilities should be provided.
+ */
+ switch (type) {
+ case CXL2_DOWNSTREAM_PORT:
+ case CXL2_DEVICE:
+ /* RAS, Link */
+ caps = 2;
+ break;
+ case CXL2_UPSTREAM_PORT:
+ case CXL2_TYPE3_DEVICE:
+ case CXL2_LOGICAL_DEVICE:
+ /* + HDM */
+ caps = 3;
+ break;
+ case CXL2_ROOT_PORT:
+ /* + Extended Security, + Snoop */
+ caps = 5;
+ break;
+ default:
+ abort();
+ }
+
+ memset(reg_state, 0, CXL2_COMPONENT_CM_REGION_SIZE);
+
+ /* CXL Capability Header Register */
+ ARRAY_FIELD_DP32(reg_state, CXL_CAPABILITY_HEADER, ID, 1);
+ ARRAY_FIELD_DP32(reg_state, CXL_CAPABILITY_HEADER, VERSION, 1);
+ ARRAY_FIELD_DP32(reg_state, CXL_CAPABILITY_HEADER, CACHE_MEM_VERSION, 1);
+ ARRAY_FIELD_DP32(reg_state, CXL_CAPABILITY_HEADER, ARRAY_SIZE, caps);
+
+#define init_cap_reg(reg, id, version) \
+ QEMU_BUILD_BUG_ON(CXL_##reg##_REGISTERS_OFFSET == 0); \
+ do { \
+ int which = R_CXL_##reg##_CAPABILITY_HEADER; \
+ reg_state[which] = FIELD_DP32(reg_state[which], \
+ CXL_##reg##_CAPABILITY_HEADER, ID, id); \
+ reg_state[which] = \
+ FIELD_DP32(reg_state[which], CXL_##reg##_CAPABILITY_HEADER, \
+ VERSION, version); \
+ reg_state[which] = \
+ FIELD_DP32(reg_state[which], CXL_##reg##_CAPABILITY_HEADER, PTR, \
+ CXL_##reg##_REGISTERS_OFFSET); \
+ } while (0)
+
+ init_cap_reg(RAS, 2, 2);
+ ras_init_common(reg_state, write_msk);
+
+ init_cap_reg(LINK, 4, 2);
+
+ if (caps < 3) {
+ return;
+ }
+
+ init_cap_reg(HDM, 5, 1);
+ hdm_init_common(reg_state, write_msk);
+
+ if (caps < 5) {
+ return;
+ }
+
+ init_cap_reg(EXTSEC, 6, 1);
+ init_cap_reg(SNOOP, 8, 1);
+
+#undef init_cap_reg
+}
+
+/*
+ * Helper to creates a DVSEC header for a CXL entity. The caller is responsible
+ * for tracking the valid offset.
+ *
+ * This function will build the DVSEC header on behalf of the caller and then
+ * copy in the remaining data for the vendor specific bits.
+ * It will also set up appropriate write masks.
+ */
+void cxl_component_create_dvsec(CXLComponentState *cxl,
+ enum reg_type cxl_dev_type, uint16_t length,
+ uint16_t type, uint8_t rev, uint8_t *body)
+{
+ PCIDevice *pdev = cxl->pdev;
+ uint16_t offset = cxl->dvsec_offset;
+ uint8_t *wmask = pdev->wmask;
+
+ assert(offset >= PCI_CFG_SPACE_SIZE &&
+ ((offset + length) < PCI_CFG_SPACE_EXP_SIZE));
+ assert((length & 0xf000) == 0);
+ assert((rev & ~0xf) == 0);
+
+ /* Create the DVSEC in the MCFG space */
+ pcie_add_capability(pdev, PCI_EXT_CAP_ID_DVSEC, 1, offset, length);
+ pci_set_long(pdev->config + offset + PCIE_DVSEC_HEADER1_OFFSET,
+ (length << 20) | (rev << 16) | CXL_VENDOR_ID);
+ pci_set_word(pdev->config + offset + PCIE_DVSEC_ID_OFFSET, type);
+ memcpy(pdev->config + offset + sizeof(DVSECHeader),
+ body + sizeof(DVSECHeader),
+ length - sizeof(DVSECHeader));
+
+ /* Configure write masks */
+ switch (type) {
+ case PCIE_CXL_DEVICE_DVSEC:
+ break;
+ case NON_CXL_FUNCTION_MAP_DVSEC:
+ break; /* Not yet implemented */
+ case EXTENSIONS_PORT_DVSEC:
+ wmask[offset + offsetof(CXLDVSECPortExtensions, control)] = 0x0F;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, control) + 1] = 0x40;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_bus_base)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_bus_limit)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_memory_base)] = 0xF0;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_memory_base) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_memory_limit)] = 0xF0;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_memory_limit) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_base)] = 0xF0;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_base) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_limit)] = 0xF0;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_limit) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_base_high)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_base_high) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_base_high) + 2] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_base_high) + 3] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_limit_high)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_limit_high) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_limit_high) + 2] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECPortExtensions, alt_prefetch_limit_high) + 3] = 0xFF;
+ break;
+ case GPF_PORT_DVSEC:
+ wmask[offset + offsetof(CXLDVSECPortGPF, phase1_ctrl)] = 0x0F;
+ wmask[offset + offsetof(CXLDVSECPortGPF, phase1_ctrl) + 1] = 0x0F;
+ wmask[offset + offsetof(CXLDVSECPortGPF, phase2_ctrl)] = 0x0F;
+ wmask[offset + offsetof(CXLDVSECPortGPF, phase2_ctrl) + 1] = 0x0F;
+ break;
+ case GPF_DEVICE_DVSEC:
+ wmask[offset + offsetof(CXLDVSECDeviceGPF, phase2_duration)] = 0x0F;
+ wmask[offset + offsetof(CXLDVSECDeviceGPF, phase2_duration) + 1] = 0x0F;
+ wmask[offset + offsetof(CXLDVSECDeviceGPF, phase2_power)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDeviceGPF, phase2_power) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDeviceGPF, phase2_power) + 2] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDeviceGPF, phase2_power) + 3] = 0xFF;
+ break;
+ case PCIE_FLEXBUS_PORT_DVSEC:
+ switch (cxl_dev_type) {
+ case CXL2_ROOT_PORT:
+ /* No MLD */
+ wmask[offset + offsetof(CXLDVSECPortFlexBus, ctrl)] = 0xbd;
+ break;
+ case CXL2_DOWNSTREAM_PORT:
+ wmask[offset + offsetof(CXLDVSECPortFlexBus, ctrl)] = 0xfd;
+ break;
+ default: /* Registers are RO for other component types */
+ break;
+ }
+ /* There are rw1cs bits in the status register but never set currently */
+ break;
+ }
+
+ /* Update state for future DVSEC additions */
+ range_init_nofail(&cxl->dvsecs[type], cxl->dvsec_offset, length);
+ cxl->dvsec_offset += length;
+}
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
new file mode 100644
index 0000000000..3231b5de1e
--- /dev/null
+++ b/hw/cxl/meson.build
@@ -0,0 +1,4 @@
+softmmu_ss.add(when: 'CONFIG_CXL',
+ if_true: files(
+ 'cxl-component-utils.c',
+ ))
diff --git a/hw/meson.build b/hw/meson.build
index b3366c888e..9992c5101e 100644
--- a/hw/meson.build
+++ b/hw/meson.build
@@ -6,6 +6,7 @@ subdir('block')
subdir('char')
subdir('core')
subdir('cpu')
+subdir('cxl')
subdir('display')
subdir('dma')
subdir('gpio')
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
new file mode 100644
index 0000000000..8c738c7a2b
--- /dev/null
+++ b/include/hw/cxl/cxl.h
@@ -0,0 +1,16 @@
+/*
+ * QEMU CXL Support
+ *
+ * Copyright (c) 2020 Intel
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#ifndef CXL_H
+#define CXL_H
+
+#include "cxl_pci.h"
+#include "cxl_component.h"
+
+#endif
diff --git a/include/hw/cxl/cxl_component.h b/include/hw/cxl/cxl_component.h
new file mode 100644
index 0000000000..7d8f395cbe
--- /dev/null
+++ b/include/hw/cxl/cxl_component.h
@@ -0,0 +1,213 @@
+/*
+ * QEMU CXL Component
+ *
+ * Copyright (c) 2020 Intel
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#ifndef CXL_COMPONENT_H
+#define CXL_COMPONENT_H
+
+/* CXL 2.0 - 8.2.4 */
+#define CXL2_COMPONENT_IO_REGION_SIZE 0x1000
+#define CXL2_COMPONENT_CM_REGION_SIZE 0x1000
+#define CXL2_COMPONENT_BLOCK_SIZE 0x10000
+
+#include "qemu/compiler.h"
+#include "qemu/range.h"
+#include "qemu/typedefs.h"
+#include "hw/register.h"
+
+enum reg_type {
+ CXL2_DEVICE,
+ CXL2_TYPE3_DEVICE,
+ CXL2_LOGICAL_DEVICE,
+ CXL2_ROOT_PORT,
+ CXL2_UPSTREAM_PORT,
+ CXL2_DOWNSTREAM_PORT
+};
+
+/*
+ * Capability registers are defined at the top of the CXL.cache/mem region and
+ * are packed. For our purposes we will always define the caps in the same
+ * order.
+ * CXL 2.0 - 8.2.5 Table 142 for details.
+ */
+
+/* CXL 2.0 - 8.2.5.1 */
+REG32(CXL_CAPABILITY_HEADER, 0)
+ FIELD(CXL_CAPABILITY_HEADER, ID, 0, 16)
+ FIELD(CXL_CAPABILITY_HEADER, VERSION, 16, 4)
+ FIELD(CXL_CAPABILITY_HEADER, CACHE_MEM_VERSION, 20, 4)
+ FIELD(CXL_CAPABILITY_HEADER, ARRAY_SIZE, 24, 8)
+
+#define CXLx_CAPABILITY_HEADER(type, offset) \
+ REG32(CXL_##type##_CAPABILITY_HEADER, offset) \
+ FIELD(CXL_##type##_CAPABILITY_HEADER, ID, 0, 16) \
+ FIELD(CXL_##type##_CAPABILITY_HEADER, VERSION, 16, 4) \
+ FIELD(CXL_##type##_CAPABILITY_HEADER, PTR, 20, 12)
+CXLx_CAPABILITY_HEADER(RAS, 0x4)
+CXLx_CAPABILITY_HEADER(LINK, 0x8)
+CXLx_CAPABILITY_HEADER(HDM, 0xc)
+CXLx_CAPABILITY_HEADER(EXTSEC, 0x10)
+CXLx_CAPABILITY_HEADER(SNOOP, 0x14)
+
+/*
+ * Capability structures contain the actual registers that the CXL component
+ * implements. Some of these are specific to certain types of components, but
+ * this implementation leaves enough space regardless.
+ */
+/* 8.2.5.9 - CXL RAS Capability Structure */
+
+/* Give ample space for caps before this */
+#define CXL_RAS_REGISTERS_OFFSET 0x80
+#define CXL_RAS_REGISTERS_SIZE 0x58
+REG32(CXL_RAS_UNC_ERR_STATUS, CXL_RAS_REGISTERS_OFFSET)
+REG32(CXL_RAS_UNC_ERR_MASK, CXL_RAS_REGISTERS_OFFSET + 0x4)
+REG32(CXL_RAS_UNC_ERR_SEVERITY, CXL_RAS_REGISTERS_OFFSET + 0x8)
+REG32(CXL_RAS_COR_ERR_STATUS, CXL_RAS_REGISTERS_OFFSET + 0xc)
+REG32(CXL_RAS_COR_ERR_MASK, CXL_RAS_REGISTERS_OFFSET + 0x10)
+REG32(CXL_RAS_ERR_CAP_CTRL, CXL_RAS_REGISTERS_OFFSET + 0x14)
+/* Offset 0x18 - 0x58 reserved for RAS logs */
+
+/* 8.2.5.10 - CXL Security Capability Structure */
+#define CXL_SEC_REGISTERS_OFFSET \
+ (CXL_RAS_REGISTERS_OFFSET + CXL_RAS_REGISTERS_SIZE)
+#define CXL_SEC_REGISTERS_SIZE 0 /* We don't implement 1.1 downstream ports */
+
+/* 8.2.5.11 - CXL Link Capability Structure */
+#define CXL_LINK_REGISTERS_OFFSET \
+ (CXL_SEC_REGISTERS_OFFSET + CXL_SEC_REGISTERS_SIZE)
+#define CXL_LINK_REGISTERS_SIZE 0x38
+
+/* 8.2.5.12 - CXL HDM Decoder Capability Structure */
+#define HDM_DECODE_MAX 10 /* 8.2.5.12.1 */
+#define CXL_HDM_REGISTERS_OFFSET \
+ (CXL_LINK_REGISTERS_OFFSET + CXL_LINK_REGISTERS_SIZE)
+#define CXL_HDM_REGISTERS_SIZE (0x10 + 0x20 * HDM_DECODE_MAX)
+#define HDM_DECODER_INIT(n) \
+ REG32(CXL_HDM_DECODER##n##_BASE_LO, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x10) \
+ FIELD(CXL_HDM_DECODER##n##_BASE_LO, L, 28, 4) \
+ REG32(CXL_HDM_DECODER##n##_BASE_HI, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x14) \
+ REG32(CXL_HDM_DECODER##n##_SIZE_LO, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x18) \
+ REG32(CXL_HDM_DECODER##n##_SIZE_HI, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x1C) \
+ REG32(CXL_HDM_DECODER##n##_CTRL, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x20) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, IG, 0, 4) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, IW, 4, 4) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, LOCK_ON_COMMIT, 8, 1) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, COMMIT, 9, 1) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, COMMITTED, 10, 1) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, ERR, 11, 1) \
+ FIELD(CXL_HDM_DECODER##n##_CTRL, TYPE, 12, 1) \
+ REG32(CXL_HDM_DECODER##n##_TARGET_LIST_LO, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x24) \
+ REG32(CXL_HDM_DECODER##n##_TARGET_LIST_HI, \
+ CXL_HDM_REGISTERS_OFFSET + (0x20 * n) + 0x28)
+
+REG32(CXL_HDM_DECODER_CAPABILITY, CXL_HDM_REGISTERS_OFFSET)
+ FIELD(CXL_HDM_DECODER_CAPABILITY, DECODER_COUNT, 0, 4)
+ FIELD(CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 4, 4)
+ FIELD(CXL_HDM_DECODER_CAPABILITY, INTERLEAVE_256B, 8, 1)
+ FIELD(CXL_HDM_DECODER_CAPABILITY, INTERLEAVE_4K, 9, 1)
+ FIELD(CXL_HDM_DECODER_CAPABILITY, POISON_ON_ERR_CAP, 10, 1)
+REG32(CXL_HDM_DECODER_GLOBAL_CONTROL, CXL_HDM_REGISTERS_OFFSET + 4)
+ FIELD(CXL_HDM_DECODER_GLOBAL_CONTROL, POISON_ON_ERR_EN, 0, 1)
+ FIELD(CXL_HDM_DECODER_GLOBAL_CONTROL, HDM_DECODER_ENABLE, 1, 1)
+
+HDM_DECODER_INIT(0);
+
+/* 8.2.5.13 - CXL Extended Security Capability Structure (Root complex only) */
+#define EXTSEC_ENTRY_MAX 256
+#define CXL_EXTSEC_REGISTERS_OFFSET \
+ (CXL_HDM_REGISTERS_OFFSET + CXL_HDM_REGISTERS_SIZE)
+#define CXL_EXTSEC_REGISTERS_SIZE (8 * EXTSEC_ENTRY_MAX + 4)
+
+/* 8.2.5.14 - CXL IDE Capability Structure */
+#define CXL_IDE_REGISTERS_OFFSET \
+ (CXL_EXTSEC_REGISTERS_OFFSET + CXL_EXTSEC_REGISTERS_SIZE)
+#define CXL_IDE_REGISTERS_SIZE 0x20
+
+/* 8.2.5.15 - CXL Snoop Filter Capability Structure */
+#define CXL_SNOOP_REGISTERS_OFFSET \
+ (CXL_IDE_REGISTERS_OFFSET + CXL_IDE_REGISTERS_SIZE)
+#define CXL_SNOOP_REGISTERS_SIZE 0x8
+
+QEMU_BUILD_BUG_MSG((CXL_SNOOP_REGISTERS_OFFSET + CXL_SNOOP_REGISTERS_SIZE) >= 0x1000,
+ "No space for registers");
+
+typedef struct component_registers {
+ /*
+ * Main memory region to be registered with QEMU core.
+ */
+ MemoryRegion component_registers;
+
+ /*
+ * 8.2.4 Table 141:
+ * 0x0000 - 0x0fff CXL.io registers
+ * 0x1000 - 0x1fff CXL.cache and CXL.mem
+ * 0x2000 - 0xdfff Implementation specific
+ * 0xe000 - 0xe3ff CXL ARB/MUX registers
+ * 0xe400 - 0xffff RSVD
+ */
+ uint32_t io_registers[CXL2_COMPONENT_IO_REGION_SIZE >> 2];
+ MemoryRegion io;
+
+ uint32_t cache_mem_registers[CXL2_COMPONENT_CM_REGION_SIZE >> 2];
+ uint32_t cache_mem_regs_write_mask[CXL2_COMPONENT_CM_REGION_SIZE >> 2];
+ MemoryRegion cache_mem;
+
+ MemoryRegion impl_specific;
+ MemoryRegion arb_mux;
+ MemoryRegion rsvd;
+
+ /* special_ops is used for any component that needs any specific handling */
+ MemoryRegionOps *special_ops;
+} ComponentRegisters;
+
+/*
+ * A CXL component represents all entities in a CXL hierarchy. This includes,
+ * host bridges, root ports, upstream/downstream switch ports, and devices
+ */
+typedef struct cxl_component {
+ ComponentRegisters crb;
+ union {
+ struct {
+ Range dvsecs[CXL20_MAX_DVSEC];
+ uint16_t dvsec_offset;
+ struct PCIDevice *pdev;
+ };
+ };
+} CXLComponentState;
+
+void cxl_component_register_block_init(Object *obj,
+ CXLComponentState *cxl_cstate,
+ const char *type);
+void cxl_component_register_init_common(uint32_t *reg_state,
+ uint32_t *write_msk,
+ enum reg_type type);
+
+void cxl_component_create_dvsec(CXLComponentState *cxl_cstate,
+ enum reg_type cxl_dev_type, uint16_t length,
+ uint16_t type, uint8_t rev, uint8_t *body);
+
+static inline int cxl_decoder_count_enc(int count)
+{
+ switch (count) {
+ case 1: return 0;
+ case 2: return 1;
+ case 4: return 2;
+ case 6: return 3;
+ case 8: return 4;
+ case 10: return 5;
+ }
+ return 0;
+}
+
+#endif
diff --git a/include/hw/cxl/cxl_pci.h b/include/hw/cxl/cxl_pci.h
new file mode 100644
index 0000000000..3f7e44daac
--- /dev/null
+++ b/include/hw/cxl/cxl_pci.h
@@ -0,0 +1,146 @@
+/*
+ * QEMU CXL PCI interfaces
+ *
+ * Copyright (c) 2020 Intel
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#ifndef CXL_PCI_H
+#define CXL_PCI_H
+
+#include "qemu/compiler.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pcie.h"
+
+#define CXL_VENDOR_ID 0x1e98
+
+#define PCIE_DVSEC_HEADER1_OFFSET 0x4 /* Offset from start of extend cap */
+#define PCIE_DVSEC_ID_OFFSET 0x8
+
+#define PCIE_CXL_DEVICE_DVSEC_LENGTH 0x38
+#define PCIE_CXL1_DEVICE_DVSEC_REVID 0
+#define PCIE_CXL2_DEVICE_DVSEC_REVID 1
+
+#define EXTENSIONS_PORT_DVSEC_LENGTH 0x28
+#define EXTENSIONS_PORT_DVSEC_REVID 0
+
+#define GPF_PORT_DVSEC_LENGTH 0x10
+#define GPF_PORT_DVSEC_REVID 0
+
+#define GPF_DEVICE_DVSEC_LENGTH 0x10
+#define GPF_DEVICE_DVSEC_REVID 0
+
+#define PCIE_FLEXBUS_PORT_DVSEC_LENGTH_2_0 0x14
+#define PCIE_FLEXBUS_PORT_DVSEC_REVID_2_0 1
+
+#define REG_LOC_DVSEC_LENGTH 0x24
+#define REG_LOC_DVSEC_REVID 0
+
+enum {
+ PCIE_CXL_DEVICE_DVSEC = 0,
+ NON_CXL_FUNCTION_MAP_DVSEC = 2,
+ EXTENSIONS_PORT_DVSEC = 3,
+ GPF_PORT_DVSEC = 4,
+ GPF_DEVICE_DVSEC = 5,
+ PCIE_FLEXBUS_PORT_DVSEC = 7,
+ REG_LOC_DVSEC = 8,
+ MLD_DVSEC = 9,
+ CXL20_MAX_DVSEC
+};
+
+typedef struct DVSECHeader {
+ uint32_t cap_hdr;
+ uint32_t dv_hdr1;
+ uint16_t dv_hdr2;
+} QEMU_PACKED DVSECHeader;
+QEMU_BUILD_BUG_ON(sizeof(DVSECHeader) != 10);
+
+/*
+ * CXL 2.0 devices must implement certain DVSEC IDs, and can [optionally]
+ * implement others.
+ *
+ * CXL 2.0 Device: 0, [2], 5, 8
+ * CXL 2.0 RP: 3, 4, 7, 8
+ * CXL 2.0 Upstream Port: [2], 7, 8
+ * CXL 2.0 Downstream Port: 3, 4, 7, 8
+ */
+
+/* CXL 2.0 - 8.1.5 (ID 0003) */
+typedef struct CXLDVSECPortExtensions {
+ DVSECHeader hdr;
+ uint16_t status;
+ uint16_t control;
+ uint8_t alt_bus_base;
+ uint8_t alt_bus_limit;
+ uint16_t alt_memory_base;
+ uint16_t alt_memory_limit;
+ uint16_t alt_prefetch_base;
+ uint16_t alt_prefetch_limit;
+ uint32_t alt_prefetch_base_high;
+ uint32_t alt_prefetch_limit_high;
+ uint32_t rcrb_base;
+ uint32_t rcrb_base_high;
+} CXLDVSECPortExtensions;
+QEMU_BUILD_BUG_ON(sizeof(CXLDVSECPortExtensions) != 0x28);
+
+#define PORT_CONTROL_OFFSET 0xc
+#define PORT_CONTROL_UNMASK_SBR 1
+#define PORT_CONTROL_ALT_MEMID_EN 4
+
+/* CXL 2.0 - 8.1.6 GPF DVSEC (ID 0004) */
+typedef struct CXLDVSECPortGPF {
+ DVSECHeader hdr;
+ uint16_t rsvd;
+ uint16_t phase1_ctrl;
+ uint16_t phase2_ctrl;
+} CXLDVSECPortGPF;
+QEMU_BUILD_BUG_ON(sizeof(CXLDVSECPortGPF) != 0x10);
+
+/* CXL 2.0 - 8.1.7 GPF DVSEC for CXL Device */
+typedef struct CXLDVSECDeviceGPF {
+ DVSECHeader hdr;
+ uint16_t phase2_duration;
+ uint32_t phase2_power;
+} CXLDVSECDeviceGPF;
+QEMU_BUILD_BUG_ON(sizeof(CXLDVSECDeviceGPF) != 0x10);
+
+/* CXL 2.0 - 8.1.8/8.2.1.3 Flex Bus DVSEC (ID 0007) */
+typedef struct CXLDVSECPortFlexBus {
+ DVSECHeader hdr;
+ uint16_t cap;
+ uint16_t ctrl;
+ uint16_t status;
+ uint32_t rcvd_mod_ts_data_phase1;
+} CXLDVSECPortFlexBus;
+QEMU_BUILD_BUG_ON(sizeof(CXLDVSECPortFlexBus) != 0x14);
+
+/* CXL 2.0 - 8.1.9 Register Locator DVSEC (ID 0008) */
+typedef struct CXLDVSECRegisterLocator {
+ DVSECHeader hdr;
+ uint16_t rsvd;
+ uint32_t reg0_base_lo;
+ uint32_t reg0_base_hi;
+ uint32_t reg1_base_lo;
+ uint32_t reg1_base_hi;
+ uint32_t reg2_base_lo;
+ uint32_t reg2_base_hi;
+} CXLDVSECRegisterLocator;
+QEMU_BUILD_BUG_ON(sizeof(CXLDVSECRegisterLocator) != 0x24);
+
+/* BAR Equivalence Indicator */
+#define BEI_BAR_10H 0
+#define BEI_BAR_14H 1
+#define BEI_BAR_18H 2
+#define BEI_BAR_1cH 3
+#define BEI_BAR_20H 4
+#define BEI_BAR_24H 5
+
+/* Register Block Identifier */
+#define RBI_EMPTY 0
+#define RBI_COMPONENT_REG (1 << 8)
+#define RBI_BAR_VIRT_ACL (2 << 8)
+#define RBI_CXL_DEVICE_REG (3 << 8)
+
+#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* Re: [PATCH v10 02/45] hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-05-30 17:50 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-05-30 17:50 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
On Fri, 29 Apr 2022 15:40:27 +0100
Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
> From: Ben Widawsky <ben.widawsky@intel.com>
>
> A CXL 2.0 component is any entity in the CXL topology. All components
> have a analogous function in PCIe. Except for the CXL host bridge, all
> have a PCIe config space that is accessible via the common PCIe
> mechanisms. CXL components are enumerated via DVSEC fields in the
> extended PCIe header space. CXL components will minimally implement some
> subset of CXL.mem and CXL.cache registers defined in 8.2.5 of the CXL
> 2.0 specification. Two headers and a utility library are introduced to
> support the minimum functionality needed to enumerate components.
>
> The cxl_pci header manages bits associated with PCI, specifically the
> DVSEC and related fields. The cxl_component.h variant has data
> structures and APIs that are useful for drivers implementing any of the
> CXL 2.0 components. The library takes care of making use of the DVSEC
> bits and the CXL.[mem|cache] registers. Per spec, the registers are
> little endian.
>
> None of the mechanisms required to enumerate a CXL capable hostbridge
> are introduced at this point.
>
> Note that the CXL.mem and CXL.cache registers used are always 4B wide.
> It's possible in the future that this constraint will not hold.
>
> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
FYI on a bug, in case anyone else hits it.
> +static void hdm_init_common(uint32_t *reg_state, uint32_t *write_msk)
> +{
> + int decoder_count = 1;
> + int i;
> +
> + ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, DECODER_COUNT,
> + cxl_decoder_count_enc(decoder_count));
> + ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 1);
> + ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, INTERLEAVE_256B, 1);
> + ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, INTERLEAVE_4K, 1);
> + ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, POISON_ON_ERR_CAP, 0);
> + ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_GLOBAL_CONTROL,
> + HDM_DECODER_ENABLE, 0);
> + write_msk[R_CXL_HDM_DECODER_GLOBAL_CONTROL] = 0x3;
> + for (i = 0; i < decoder_count; i++) {
> + write_msk[R_CXL_HDM_DECODER0_BASE_LO + i * 0x20] = 0xf0000000;
> + write_msk[R_CXL_HDM_DECODER0_BASE_HI + i * 0x20] = 0xffffffff;
> + write_msk[R_CXL_HDM_DECODER0_SIZE_LO + i * 0x20] = 0xf0000000;
> + write_msk[R_CXL_HDM_DECODER0_SIZE_HI + i * 0x20] = 0xffffffff;
> + write_msk[R_CXL_HDM_DECODER0_CTRL + i * 0x20] = 0x13ff;
For some unknown reason I missed write masks for the target lists in here.
It was hidden from superficial testing by a bug in the kernel code I was using
that mean these were mostly written to 0.
I'll send a fix out tomorrow (just adds 0xffffffff masks for each of the
target registers).
Given issues I'm seeing in testing around HDM decoder programming I'll look
to follow that up with a patch adding some more rigorous checking of the
values on commit.
Jonathan
^ permalink raw reply [flat|nested] 100+ messages in thread* Re: [PATCH v10 02/45] hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5)
@ 2022-05-30 17:50 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-05-30 17:50 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
On Fri, 29 Apr 2022 15:40:27 +0100
Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
> From: Ben Widawsky <ben.widawsky@intel.com>
>
> A CXL 2.0 component is any entity in the CXL topology. All components
> have a analogous function in PCIe. Except for the CXL host bridge, all
> have a PCIe config space that is accessible via the common PCIe
> mechanisms. CXL components are enumerated via DVSEC fields in the
> extended PCIe header space. CXL components will minimally implement some
> subset of CXL.mem and CXL.cache registers defined in 8.2.5 of the CXL
> 2.0 specification. Two headers and a utility library are introduced to
> support the minimum functionality needed to enumerate components.
>
> The cxl_pci header manages bits associated with PCI, specifically the
> DVSEC and related fields. The cxl_component.h variant has data
> structures and APIs that are useful for drivers implementing any of the
> CXL 2.0 components. The library takes care of making use of the DVSEC
> bits and the CXL.[mem|cache] registers. Per spec, the registers are
> little endian.
>
> None of the mechanisms required to enumerate a CXL capable hostbridge
> are introduced at this point.
>
> Note that the CXL.mem and CXL.cache registers used are always 4B wide.
> It's possible in the future that this constraint will not hold.
>
> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
FYI on a bug, in case anyone else hits it.
> +static void hdm_init_common(uint32_t *reg_state, uint32_t *write_msk)
> +{
> + int decoder_count = 1;
> + int i;
> +
> + ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, DECODER_COUNT,
> + cxl_decoder_count_enc(decoder_count));
> + ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 1);
> + ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, INTERLEAVE_256B, 1);
> + ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, INTERLEAVE_4K, 1);
> + ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, POISON_ON_ERR_CAP, 0);
> + ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_GLOBAL_CONTROL,
> + HDM_DECODER_ENABLE, 0);
> + write_msk[R_CXL_HDM_DECODER_GLOBAL_CONTROL] = 0x3;
> + for (i = 0; i < decoder_count; i++) {
> + write_msk[R_CXL_HDM_DECODER0_BASE_LO + i * 0x20] = 0xf0000000;
> + write_msk[R_CXL_HDM_DECODER0_BASE_HI + i * 0x20] = 0xffffffff;
> + write_msk[R_CXL_HDM_DECODER0_SIZE_LO + i * 0x20] = 0xf0000000;
> + write_msk[R_CXL_HDM_DECODER0_SIZE_HI + i * 0x20] = 0xffffffff;
> + write_msk[R_CXL_HDM_DECODER0_CTRL + i * 0x20] = 0x13ff;
For some unknown reason I missed write masks for the target lists in here.
It was hidden from superficial testing by a bug in the kernel code I was using
that mean these were mostly written to 0.
I'll send a fix out tomorrow (just adds 0xffffffff masks for each of the
target registers).
Given issues I'm seeing in testing around HDM decoder programming I'll look
to follow that up with a patch adding some more rigorous checking of the
values on commit.
Jonathan
^ permalink raw reply [flat|nested] 100+ messages in thread
* [PATCH v10 03/45] MAINTAINERS: Add entry for Compute Express Link Emulation
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
The CXL emulation will be jointly maintained by Ben Widawsky
and Jonathan Cameron. Broken out as a separate patch
to improve visibility.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 294c88ace9..3fa11bf1f3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2545,6 +2545,13 @@ F: qapi/block*.json
F: qapi/transaction.json
T: git https://repo.or.cz/qemu/armbru.git block-next
+Compute Express Link
+M: Ben Widawsky <ben.widawsky@intel.com>
+M: Jonathan Cameron <jonathan.cameron@huawei.com>
+S: Supported
+F: hw/cxl/
+F: include/hw/cxl/
+
Dirty Bitmaps
M: Eric Blake <eblake@redhat.com>
M: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 03/45] MAINTAINERS: Add entry for Compute Express Link Emulation
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
The CXL emulation will be jointly maintained by Ben Widawsky
and Jonathan Cameron. Broken out as a separate patch
to improve visibility.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 294c88ace9..3fa11bf1f3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2545,6 +2545,13 @@ F: qapi/block*.json
F: qapi/transaction.json
T: git https://repo.or.cz/qemu/armbru.git block-next
+Compute Express Link
+M: Ben Widawsky <ben.widawsky@intel.com>
+M: Jonathan Cameron <jonathan.cameron@huawei.com>
+S: Supported
+F: hw/cxl/
+F: include/hw/cxl/
+
Dirty Bitmaps
M: Eric Blake <eblake@redhat.com>
M: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 04/45] hw/cxl/device: Introduce a CXL device (8.2.8)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
A CXL device is a type of CXL component. Conceptually, a CXL device
would be a leaf node in a CXL topology. From an emulation perspective,
CXL devices are the most complex and so the actual implementation is
reserved for discrete commits.
This new device type is specifically catered towards the eventual
implementation of a Type3 CXL.mem device, 8.2.8.5 in the CXL 2.0
specification.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
---
include/hw/cxl/cxl.h | 1 +
include/hw/cxl/cxl_device.h | 166 ++++++++++++++++++++++++++++++++++++
2 files changed, 167 insertions(+)
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 8c738c7a2b..b9d1ac3fad 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -12,5 +12,6 @@
#include "cxl_pci.h"
#include "cxl_component.h"
+#include "cxl_device.h"
#endif
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
new file mode 100644
index 0000000000..9513aaac77
--- /dev/null
+++ b/include/hw/cxl/cxl_device.h
@@ -0,0 +1,166 @@
+/*
+ * QEMU CXL Devices
+ *
+ * Copyright (c) 2020 Intel
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#ifndef CXL_DEVICE_H
+#define CXL_DEVICE_H
+
+#include "hw/register.h"
+
+/*
+ * The following is how a CXL device's Memory Device registers are laid out.
+ * The only requirement from the spec is that the capabilities array and the
+ * capability headers start at offset 0 and are contiguously packed. The headers
+ * themselves provide offsets to the register fields. For this emulation, the
+ * actual registers * will start at offset 0x80 (m == 0x80). No secondary
+ * mailbox is implemented which means that the offset of the start of the
+ * mailbox payload (n) is given by
+ * n = m + sizeof(mailbox registers) + sizeof(device registers).
+ *
+ * +---------------------------------+
+ * | |
+ * | Memory Device Registers |
+ * | |
+ * n + PAYLOAD_SIZE_MAX -----------------------------------
+ * ^ | |
+ * | | |
+ * | | |
+ * | | |
+ * | | |
+ * | | Mailbox Payload |
+ * | | |
+ * | | |
+ * | | |
+ * n -----------------------------------
+ * ^ | Mailbox Registers |
+ * | | |
+ * | -----------------------------------
+ * | | |
+ * | | Device Registers |
+ * | | |
+ * m ---------------------------------->
+ * ^ | Memory Device Capability Header|
+ * | -----------------------------------
+ * | | Mailbox Capability Header |
+ * | -----------------------------------
+ * | | Device Capability Header |
+ * | -----------------------------------
+ * | | Device Cap Array Register |
+ * 0 +---------------------------------+
+ *
+ */
+
+#define CXL_DEVICE_CAP_HDR1_OFFSET 0x10 /* Figure 138 */
+#define CXL_DEVICE_CAP_REG_SIZE 0x10 /* 8.2.8.2 */
+#define CXL_DEVICE_CAPS_MAX 4 /* 8.2.8.2.1 + 8.2.8.5 */
+
+#define CXL_DEVICE_STATUS_REGISTERS_OFFSET 0x80 /* Read comment above */
+#define CXL_DEVICE_STATUS_REGISTERS_LENGTH 0x8 /* 8.2.8.3.1 */
+
+#define CXL_MAILBOX_REGISTERS_OFFSET \
+ (CXL_DEVICE_STATUS_REGISTERS_OFFSET + CXL_DEVICE_STATUS_REGISTERS_LENGTH)
+#define CXL_MAILBOX_REGISTERS_SIZE 0x20 /* 8.2.8.4, Figure 139 */
+#define CXL_MAILBOX_PAYLOAD_SHIFT 11
+#define CXL_MAILBOX_MAX_PAYLOAD_SIZE (1 << CXL_MAILBOX_PAYLOAD_SHIFT)
+#define CXL_MAILBOX_REGISTERS_LENGTH \
+ (CXL_MAILBOX_REGISTERS_SIZE + CXL_MAILBOX_MAX_PAYLOAD_SIZE)
+
+typedef struct cxl_device_state {
+ MemoryRegion device_registers;
+
+ /* mmio for device capabilities array - 8.2.8.2 */
+ MemoryRegion device;
+ MemoryRegion caps;
+
+ /* mmio for the mailbox registers 8.2.8.4 */
+ MemoryRegion mailbox;
+
+ /* memory region for persistent memory, HDM */
+ uint64_t pmem_size;
+} CXLDeviceState;
+
+/* Initialize the register block for a device */
+void cxl_device_register_block_init(Object *obj, CXLDeviceState *dev);
+
+/* Set up default values for the register block */
+void cxl_device_register_init_common(CXLDeviceState *dev);
+
+/*
+ * CXL 2.0 - 8.2.8.1 including errata F4
+ * Documented as a 128 bit register, but 64 bit accesses and the second
+ * 64 bits are currently reserved.
+ */
+REG64(CXL_DEV_CAP_ARRAY, 0) /* Documented as 128 bit register but 64 byte accesses */
+ FIELD(CXL_DEV_CAP_ARRAY, CAP_ID, 0, 16)
+ FIELD(CXL_DEV_CAP_ARRAY, CAP_VERSION, 16, 8)
+ FIELD(CXL_DEV_CAP_ARRAY, CAP_COUNT, 32, 16)
+
+/*
+ * Helper macro to initialize capability headers for CXL devices.
+ *
+ * In the 8.2.8.2, this is listed as a 128b register, but in 8.2.8, it says:
+ * > No registers defined in Section 8.2.8 are larger than 64-bits wide so that
+ * > is the maximum access size allowed for these registers. If this rule is not
+ * > followed, the behavior is undefined
+ *
+ * CXL 2.0 Errata F4 states futher that the layouts in the specification are
+ * shown as greater than 128 bits, but implementations are expected to
+ * use any size of access up to 64 bits.
+ *
+ * Here we've chosen to make it 4 dwords. The spec allows any pow2 multiple
+ * access to be used for a register up to 64 bits.
+ */
+#define CXL_DEVICE_CAPABILITY_HEADER_REGISTER(n, offset) \
+ REG32(CXL_DEV_##n##_CAP_HDR0, offset) \
+ FIELD(CXL_DEV_##n##_CAP_HDR0, CAP_ID, 0, 16) \
+ FIELD(CXL_DEV_##n##_CAP_HDR0, CAP_VERSION, 16, 8) \
+ REG32(CXL_DEV_##n##_CAP_HDR1, offset + 4) \
+ FIELD(CXL_DEV_##n##_CAP_HDR1, CAP_OFFSET, 0, 32) \
+ REG32(CXL_DEV_##n##_CAP_HDR2, offset + 8) \
+ FIELD(CXL_DEV_##n##_CAP_HDR2, CAP_LENGTH, 0, 32)
+
+CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE_STATUS, CXL_DEVICE_CAP_HDR1_OFFSET)
+CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX, CXL_DEVICE_CAP_HDR1_OFFSET + \
+ CXL_DEVICE_CAP_REG_SIZE)
+
+/* CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register */
+REG32(CXL_DEV_MAILBOX_CAP, 0)
+ FIELD(CXL_DEV_MAILBOX_CAP, PAYLOAD_SIZE, 0, 5)
+ FIELD(CXL_DEV_MAILBOX_CAP, INT_CAP, 5, 1)
+ FIELD(CXL_DEV_MAILBOX_CAP, BG_INT_CAP, 6, 1)
+ FIELD(CXL_DEV_MAILBOX_CAP, MSI_N, 7, 4)
+
+/* CXL 2.0 8.2.8.4.4 Mailbox Control Register */
+REG32(CXL_DEV_MAILBOX_CTRL, 4)
+ FIELD(CXL_DEV_MAILBOX_CTRL, DOORBELL, 0, 1)
+ FIELD(CXL_DEV_MAILBOX_CTRL, INT_EN, 1, 1)
+ FIELD(CXL_DEV_MAILBOX_CTRL, BG_INT_EN, 2, 1)
+
+/* CXL 2.0 8.2.8.4.5 Command Register */
+REG64(CXL_DEV_MAILBOX_CMD, 8)
+ FIELD(CXL_DEV_MAILBOX_CMD, COMMAND, 0, 8)
+ FIELD(CXL_DEV_MAILBOX_CMD, COMMAND_SET, 8, 8)
+ FIELD(CXL_DEV_MAILBOX_CMD, LENGTH, 16, 20)
+
+/* CXL 2.0 8.2.8.4.6 Mailbox Status Register */
+REG64(CXL_DEV_MAILBOX_STS, 0x10)
+ FIELD(CXL_DEV_MAILBOX_STS, BG_OP, 0, 1)
+ FIELD(CXL_DEV_MAILBOX_STS, ERRNO, 32, 16)
+ FIELD(CXL_DEV_MAILBOX_STS, VENDOR_ERRNO, 48, 16)
+
+/* CXL 2.0 8.2.8.4.7 Background Command Status Register */
+REG64(CXL_DEV_BG_CMD_STS, 0x18)
+ FIELD(CXL_DEV_BG_CMD_STS, OP, 0, 16)
+ FIELD(CXL_DEV_BG_CMD_STS, PERCENTAGE_COMP, 16, 7)
+ FIELD(CXL_DEV_BG_CMD_STS, RET_CODE, 32, 16)
+ FIELD(CXL_DEV_BG_CMD_STS, VENDOR_RET_CODE, 48, 16)
+
+/* CXL 2.0 8.2.8.4.8 Command Payload Registers */
+REG32(CXL_DEV_CMD_PAYLOAD, 0x20)
+
+#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 04/45] hw/cxl/device: Introduce a CXL device (8.2.8)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
A CXL device is a type of CXL component. Conceptually, a CXL device
would be a leaf node in a CXL topology. From an emulation perspective,
CXL devices are the most complex and so the actual implementation is
reserved for discrete commits.
This new device type is specifically catered towards the eventual
implementation of a Type3 CXL.mem device, 8.2.8.5 in the CXL 2.0
specification.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
---
include/hw/cxl/cxl.h | 1 +
include/hw/cxl/cxl_device.h | 166 ++++++++++++++++++++++++++++++++++++
2 files changed, 167 insertions(+)
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 8c738c7a2b..b9d1ac3fad 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -12,5 +12,6 @@
#include "cxl_pci.h"
#include "cxl_component.h"
+#include "cxl_device.h"
#endif
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
new file mode 100644
index 0000000000..9513aaac77
--- /dev/null
+++ b/include/hw/cxl/cxl_device.h
@@ -0,0 +1,166 @@
+/*
+ * QEMU CXL Devices
+ *
+ * Copyright (c) 2020 Intel
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#ifndef CXL_DEVICE_H
+#define CXL_DEVICE_H
+
+#include "hw/register.h"
+
+/*
+ * The following is how a CXL device's Memory Device registers are laid out.
+ * The only requirement from the spec is that the capabilities array and the
+ * capability headers start at offset 0 and are contiguously packed. The headers
+ * themselves provide offsets to the register fields. For this emulation, the
+ * actual registers * will start at offset 0x80 (m == 0x80). No secondary
+ * mailbox is implemented which means that the offset of the start of the
+ * mailbox payload (n) is given by
+ * n = m + sizeof(mailbox registers) + sizeof(device registers).
+ *
+ * +---------------------------------+
+ * | |
+ * | Memory Device Registers |
+ * | |
+ * n + PAYLOAD_SIZE_MAX -----------------------------------
+ * ^ | |
+ * | | |
+ * | | |
+ * | | |
+ * | | |
+ * | | Mailbox Payload |
+ * | | |
+ * | | |
+ * | | |
+ * n -----------------------------------
+ * ^ | Mailbox Registers |
+ * | | |
+ * | -----------------------------------
+ * | | |
+ * | | Device Registers |
+ * | | |
+ * m ---------------------------------->
+ * ^ | Memory Device Capability Header|
+ * | -----------------------------------
+ * | | Mailbox Capability Header |
+ * | -----------------------------------
+ * | | Device Capability Header |
+ * | -----------------------------------
+ * | | Device Cap Array Register |
+ * 0 +---------------------------------+
+ *
+ */
+
+#define CXL_DEVICE_CAP_HDR1_OFFSET 0x10 /* Figure 138 */
+#define CXL_DEVICE_CAP_REG_SIZE 0x10 /* 8.2.8.2 */
+#define CXL_DEVICE_CAPS_MAX 4 /* 8.2.8.2.1 + 8.2.8.5 */
+
+#define CXL_DEVICE_STATUS_REGISTERS_OFFSET 0x80 /* Read comment above */
+#define CXL_DEVICE_STATUS_REGISTERS_LENGTH 0x8 /* 8.2.8.3.1 */
+
+#define CXL_MAILBOX_REGISTERS_OFFSET \
+ (CXL_DEVICE_STATUS_REGISTERS_OFFSET + CXL_DEVICE_STATUS_REGISTERS_LENGTH)
+#define CXL_MAILBOX_REGISTERS_SIZE 0x20 /* 8.2.8.4, Figure 139 */
+#define CXL_MAILBOX_PAYLOAD_SHIFT 11
+#define CXL_MAILBOX_MAX_PAYLOAD_SIZE (1 << CXL_MAILBOX_PAYLOAD_SHIFT)
+#define CXL_MAILBOX_REGISTERS_LENGTH \
+ (CXL_MAILBOX_REGISTERS_SIZE + CXL_MAILBOX_MAX_PAYLOAD_SIZE)
+
+typedef struct cxl_device_state {
+ MemoryRegion device_registers;
+
+ /* mmio for device capabilities array - 8.2.8.2 */
+ MemoryRegion device;
+ MemoryRegion caps;
+
+ /* mmio for the mailbox registers 8.2.8.4 */
+ MemoryRegion mailbox;
+
+ /* memory region for persistent memory, HDM */
+ uint64_t pmem_size;
+} CXLDeviceState;
+
+/* Initialize the register block for a device */
+void cxl_device_register_block_init(Object *obj, CXLDeviceState *dev);
+
+/* Set up default values for the register block */
+void cxl_device_register_init_common(CXLDeviceState *dev);
+
+/*
+ * CXL 2.0 - 8.2.8.1 including errata F4
+ * Documented as a 128 bit register, but 64 bit accesses and the second
+ * 64 bits are currently reserved.
+ */
+REG64(CXL_DEV_CAP_ARRAY, 0) /* Documented as 128 bit register but 64 byte accesses */
+ FIELD(CXL_DEV_CAP_ARRAY, CAP_ID, 0, 16)
+ FIELD(CXL_DEV_CAP_ARRAY, CAP_VERSION, 16, 8)
+ FIELD(CXL_DEV_CAP_ARRAY, CAP_COUNT, 32, 16)
+
+/*
+ * Helper macro to initialize capability headers for CXL devices.
+ *
+ * In the 8.2.8.2, this is listed as a 128b register, but in 8.2.8, it says:
+ * > No registers defined in Section 8.2.8 are larger than 64-bits wide so that
+ * > is the maximum access size allowed for these registers. If this rule is not
+ * > followed, the behavior is undefined
+ *
+ * CXL 2.0 Errata F4 states futher that the layouts in the specification are
+ * shown as greater than 128 bits, but implementations are expected to
+ * use any size of access up to 64 bits.
+ *
+ * Here we've chosen to make it 4 dwords. The spec allows any pow2 multiple
+ * access to be used for a register up to 64 bits.
+ */
+#define CXL_DEVICE_CAPABILITY_HEADER_REGISTER(n, offset) \
+ REG32(CXL_DEV_##n##_CAP_HDR0, offset) \
+ FIELD(CXL_DEV_##n##_CAP_HDR0, CAP_ID, 0, 16) \
+ FIELD(CXL_DEV_##n##_CAP_HDR0, CAP_VERSION, 16, 8) \
+ REG32(CXL_DEV_##n##_CAP_HDR1, offset + 4) \
+ FIELD(CXL_DEV_##n##_CAP_HDR1, CAP_OFFSET, 0, 32) \
+ REG32(CXL_DEV_##n##_CAP_HDR2, offset + 8) \
+ FIELD(CXL_DEV_##n##_CAP_HDR2, CAP_LENGTH, 0, 32)
+
+CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE_STATUS, CXL_DEVICE_CAP_HDR1_OFFSET)
+CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX, CXL_DEVICE_CAP_HDR1_OFFSET + \
+ CXL_DEVICE_CAP_REG_SIZE)
+
+/* CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register */
+REG32(CXL_DEV_MAILBOX_CAP, 0)
+ FIELD(CXL_DEV_MAILBOX_CAP, PAYLOAD_SIZE, 0, 5)
+ FIELD(CXL_DEV_MAILBOX_CAP, INT_CAP, 5, 1)
+ FIELD(CXL_DEV_MAILBOX_CAP, BG_INT_CAP, 6, 1)
+ FIELD(CXL_DEV_MAILBOX_CAP, MSI_N, 7, 4)
+
+/* CXL 2.0 8.2.8.4.4 Mailbox Control Register */
+REG32(CXL_DEV_MAILBOX_CTRL, 4)
+ FIELD(CXL_DEV_MAILBOX_CTRL, DOORBELL, 0, 1)
+ FIELD(CXL_DEV_MAILBOX_CTRL, INT_EN, 1, 1)
+ FIELD(CXL_DEV_MAILBOX_CTRL, BG_INT_EN, 2, 1)
+
+/* CXL 2.0 8.2.8.4.5 Command Register */
+REG64(CXL_DEV_MAILBOX_CMD, 8)
+ FIELD(CXL_DEV_MAILBOX_CMD, COMMAND, 0, 8)
+ FIELD(CXL_DEV_MAILBOX_CMD, COMMAND_SET, 8, 8)
+ FIELD(CXL_DEV_MAILBOX_CMD, LENGTH, 16, 20)
+
+/* CXL 2.0 8.2.8.4.6 Mailbox Status Register */
+REG64(CXL_DEV_MAILBOX_STS, 0x10)
+ FIELD(CXL_DEV_MAILBOX_STS, BG_OP, 0, 1)
+ FIELD(CXL_DEV_MAILBOX_STS, ERRNO, 32, 16)
+ FIELD(CXL_DEV_MAILBOX_STS, VENDOR_ERRNO, 48, 16)
+
+/* CXL 2.0 8.2.8.4.7 Background Command Status Register */
+REG64(CXL_DEV_BG_CMD_STS, 0x18)
+ FIELD(CXL_DEV_BG_CMD_STS, OP, 0, 16)
+ FIELD(CXL_DEV_BG_CMD_STS, PERCENTAGE_COMP, 16, 7)
+ FIELD(CXL_DEV_BG_CMD_STS, RET_CODE, 32, 16)
+ FIELD(CXL_DEV_BG_CMD_STS, VENDOR_RET_CODE, 48, 16)
+
+/* CXL 2.0 8.2.8.4.8 Command Payload Registers */
+REG32(CXL_DEV_CMD_PAYLOAD, 0x20)
+
+#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 05/45] hw/cxl/device: Implement the CAP array (8.2.8.1-2)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
This implements all device MMIO up to the first capability. That
includes the CXL Device Capabilities Array Register, as well as all of
the CXL Device Capability Header Registers. The latter are filled in as
they are implemented in the following patches.
Endianness and alignment are managed by softmmu memory core.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-device-utils.c | 109 ++++++++++++++++++++++++++++++++++++
hw/cxl/meson.build | 1 +
include/hw/cxl/cxl_device.h | 31 +++++++++-
3 files changed, 140 insertions(+), 1 deletion(-)
diff --git a/hw/cxl/cxl-device-utils.c b/hw/cxl/cxl-device-utils.c
new file mode 100644
index 0000000000..241f9f82e3
--- /dev/null
+++ b/hw/cxl/cxl-device-utils.c
@@ -0,0 +1,109 @@
+/*
+ * CXL Utility library for devices
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/cxl/cxl.h"
+
+/*
+ * Device registers have no restrictions per the spec, and so fall back to the
+ * default memory mapped register rules in 8.2:
+ * Software shall use CXL.io Memory Read and Write to access memory mapped
+ * register defined in this section. Unless otherwise specified, software
+ * shall restrict the accesses width based on the following:
+ * • A 32 bit register shall be accessed as a 1 Byte, 2 Bytes or 4 Bytes
+ * quantity.
+ * • A 64 bit register shall be accessed as a 1 Byte, 2 Bytes, 4 Bytes or 8
+ * Bytes
+ * • The address shall be a multiple of the access width, e.g. when
+ * accessing a register as a 4 Byte quantity, the address shall be
+ * multiple of 4.
+ * • The accesses shall map to contiguous bytes.If these rules are not
+ * followed, the behavior is undefined
+ */
+
+static uint64_t caps_reg_read(void *opaque, hwaddr offset, unsigned size)
+{
+ CXLDeviceState *cxl_dstate = opaque;
+
+ if (size == 4) {
+ return cxl_dstate->caps_reg_state32[offset / sizeof(*cxl_dstate->caps_reg_state32)];
+ } else {
+ return cxl_dstate->caps_reg_state64[offset / sizeof(*cxl_dstate->caps_reg_state64)];
+ }
+}
+
+static uint64_t dev_reg_read(void *opaque, hwaddr offset, unsigned size)
+{
+ return 0;
+}
+
+static const MemoryRegionOps dev_ops = {
+ .read = dev_reg_read,
+ .write = NULL, /* status register is read only */
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = false,
+ },
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ },
+};
+
+static const MemoryRegionOps caps_ops = {
+ .read = caps_reg_read,
+ .write = NULL, /* caps registers are read only */
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = false,
+ },
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 8,
+ },
+};
+
+void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
+{
+ /* This will be a BAR, so needs to be rounded up to pow2 for PCI spec */
+ memory_region_init(&cxl_dstate->device_registers, obj, "device-registers",
+ pow2ceil(CXL_MMIO_SIZE));
+
+ memory_region_init_io(&cxl_dstate->caps, obj, &caps_ops, cxl_dstate,
+ "cap-array", CXL_CAPS_SIZE);
+ memory_region_init_io(&cxl_dstate->device, obj, &dev_ops, cxl_dstate,
+ "device-status", CXL_DEVICE_STATUS_REGISTERS_LENGTH);
+
+ memory_region_add_subregion(&cxl_dstate->device_registers, 0,
+ &cxl_dstate->caps);
+ memory_region_add_subregion(&cxl_dstate->device_registers,
+ CXL_DEVICE_STATUS_REGISTERS_OFFSET,
+ &cxl_dstate->device);
+}
+
+static void device_reg_init_common(CXLDeviceState *cxl_dstate) { }
+
+void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
+{
+ uint64_t *cap_hdrs = cxl_dstate->caps_reg_state64;
+ const int cap_count = 1;
+
+ /* CXL Device Capabilities Array Register */
+ ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_ID, 0);
+ ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_VERSION, 1);
+ ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_COUNT, cap_count);
+
+ cxl_device_cap_init(cxl_dstate, DEVICE_STATUS, 1);
+ device_reg_init_common(cxl_dstate);
+}
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
index 3231b5de1e..dd7c6f8e5a 100644
--- a/hw/cxl/meson.build
+++ b/hw/cxl/meson.build
@@ -1,4 +1,5 @@
softmmu_ss.add(when: 'CONFIG_CXL',
if_true: files(
'cxl-component-utils.c',
+ 'cxl-device-utils.c',
))
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 9513aaac77..599c887616 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -58,6 +58,8 @@
#define CXL_DEVICE_CAP_HDR1_OFFSET 0x10 /* Figure 138 */
#define CXL_DEVICE_CAP_REG_SIZE 0x10 /* 8.2.8.2 */
#define CXL_DEVICE_CAPS_MAX 4 /* 8.2.8.2.1 + 8.2.8.5 */
+#define CXL_CAPS_SIZE \
+ (CXL_DEVICE_CAP_REG_SIZE * (CXL_DEVICE_CAPS_MAX + 1)) /* +1 for header */
#define CXL_DEVICE_STATUS_REGISTERS_OFFSET 0x80 /* Read comment above */
#define CXL_DEVICE_STATUS_REGISTERS_LENGTH 0x8 /* 8.2.8.3.1 */
@@ -70,12 +72,22 @@
#define CXL_MAILBOX_REGISTERS_LENGTH \
(CXL_MAILBOX_REGISTERS_SIZE + CXL_MAILBOX_MAX_PAYLOAD_SIZE)
+#define CXL_MMIO_SIZE \
+ (CXL_DEVICE_CAP_REG_SIZE + CXL_DEVICE_STATUS_REGISTERS_LENGTH + \
+ CXL_MAILBOX_REGISTERS_LENGTH)
+
typedef struct cxl_device_state {
MemoryRegion device_registers;
/* mmio for device capabilities array - 8.2.8.2 */
MemoryRegion device;
- MemoryRegion caps;
+ struct {
+ MemoryRegion caps;
+ union {
+ uint32_t caps_reg_state32[CXL_CAPS_SIZE / 4];
+ uint64_t caps_reg_state64[CXL_CAPS_SIZE / 8];
+ };
+ };
/* mmio for the mailbox registers 8.2.8.4 */
MemoryRegion mailbox;
@@ -128,6 +140,23 @@ CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE_STATUS, CXL_DEVICE_CAP_HDR1_OFFSET)
CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX, CXL_DEVICE_CAP_HDR1_OFFSET + \
CXL_DEVICE_CAP_REG_SIZE)
+#define cxl_device_cap_init(dstate, reg, cap_id) \
+ do { \
+ uint32_t *cap_hdrs = dstate->caps_reg_state32; \
+ int which = R_CXL_DEV_##reg##_CAP_HDR0; \
+ cap_hdrs[which] = \
+ FIELD_DP32(cap_hdrs[which], CXL_DEV_##reg##_CAP_HDR0, \
+ CAP_ID, cap_id); \
+ cap_hdrs[which] = FIELD_DP32( \
+ cap_hdrs[which], CXL_DEV_##reg##_CAP_HDR0, CAP_VERSION, 1); \
+ cap_hdrs[which + 1] = \
+ FIELD_DP32(cap_hdrs[which + 1], CXL_DEV_##reg##_CAP_HDR1, \
+ CAP_OFFSET, CXL_##reg##_REGISTERS_OFFSET); \
+ cap_hdrs[which + 2] = \
+ FIELD_DP32(cap_hdrs[which + 2], CXL_DEV_##reg##_CAP_HDR2, \
+ CAP_LENGTH, CXL_##reg##_REGISTERS_LENGTH); \
+ } while (0)
+
/* CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register */
REG32(CXL_DEV_MAILBOX_CAP, 0)
FIELD(CXL_DEV_MAILBOX_CAP, PAYLOAD_SIZE, 0, 5)
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 05/45] hw/cxl/device: Implement the CAP array (8.2.8.1-2)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
This implements all device MMIO up to the first capability. That
includes the CXL Device Capabilities Array Register, as well as all of
the CXL Device Capability Header Registers. The latter are filled in as
they are implemented in the following patches.
Endianness and alignment are managed by softmmu memory core.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-device-utils.c | 109 ++++++++++++++++++++++++++++++++++++
hw/cxl/meson.build | 1 +
include/hw/cxl/cxl_device.h | 31 +++++++++-
3 files changed, 140 insertions(+), 1 deletion(-)
diff --git a/hw/cxl/cxl-device-utils.c b/hw/cxl/cxl-device-utils.c
new file mode 100644
index 0000000000..241f9f82e3
--- /dev/null
+++ b/hw/cxl/cxl-device-utils.c
@@ -0,0 +1,109 @@
+/*
+ * CXL Utility library for devices
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/cxl/cxl.h"
+
+/*
+ * Device registers have no restrictions per the spec, and so fall back to the
+ * default memory mapped register rules in 8.2:
+ * Software shall use CXL.io Memory Read and Write to access memory mapped
+ * register defined in this section. Unless otherwise specified, software
+ * shall restrict the accesses width based on the following:
+ * • A 32 bit register shall be accessed as a 1 Byte, 2 Bytes or 4 Bytes
+ * quantity.
+ * • A 64 bit register shall be accessed as a 1 Byte, 2 Bytes, 4 Bytes or 8
+ * Bytes
+ * • The address shall be a multiple of the access width, e.g. when
+ * accessing a register as a 4 Byte quantity, the address shall be
+ * multiple of 4.
+ * • The accesses shall map to contiguous bytes.If these rules are not
+ * followed, the behavior is undefined
+ */
+
+static uint64_t caps_reg_read(void *opaque, hwaddr offset, unsigned size)
+{
+ CXLDeviceState *cxl_dstate = opaque;
+
+ if (size == 4) {
+ return cxl_dstate->caps_reg_state32[offset / sizeof(*cxl_dstate->caps_reg_state32)];
+ } else {
+ return cxl_dstate->caps_reg_state64[offset / sizeof(*cxl_dstate->caps_reg_state64)];
+ }
+}
+
+static uint64_t dev_reg_read(void *opaque, hwaddr offset, unsigned size)
+{
+ return 0;
+}
+
+static const MemoryRegionOps dev_ops = {
+ .read = dev_reg_read,
+ .write = NULL, /* status register is read only */
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = false,
+ },
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ },
+};
+
+static const MemoryRegionOps caps_ops = {
+ .read = caps_reg_read,
+ .write = NULL, /* caps registers are read only */
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = false,
+ },
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 8,
+ },
+};
+
+void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
+{
+ /* This will be a BAR, so needs to be rounded up to pow2 for PCI spec */
+ memory_region_init(&cxl_dstate->device_registers, obj, "device-registers",
+ pow2ceil(CXL_MMIO_SIZE));
+
+ memory_region_init_io(&cxl_dstate->caps, obj, &caps_ops, cxl_dstate,
+ "cap-array", CXL_CAPS_SIZE);
+ memory_region_init_io(&cxl_dstate->device, obj, &dev_ops, cxl_dstate,
+ "device-status", CXL_DEVICE_STATUS_REGISTERS_LENGTH);
+
+ memory_region_add_subregion(&cxl_dstate->device_registers, 0,
+ &cxl_dstate->caps);
+ memory_region_add_subregion(&cxl_dstate->device_registers,
+ CXL_DEVICE_STATUS_REGISTERS_OFFSET,
+ &cxl_dstate->device);
+}
+
+static void device_reg_init_common(CXLDeviceState *cxl_dstate) { }
+
+void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
+{
+ uint64_t *cap_hdrs = cxl_dstate->caps_reg_state64;
+ const int cap_count = 1;
+
+ /* CXL Device Capabilities Array Register */
+ ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_ID, 0);
+ ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_VERSION, 1);
+ ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_COUNT, cap_count);
+
+ cxl_device_cap_init(cxl_dstate, DEVICE_STATUS, 1);
+ device_reg_init_common(cxl_dstate);
+}
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
index 3231b5de1e..dd7c6f8e5a 100644
--- a/hw/cxl/meson.build
+++ b/hw/cxl/meson.build
@@ -1,4 +1,5 @@
softmmu_ss.add(when: 'CONFIG_CXL',
if_true: files(
'cxl-component-utils.c',
+ 'cxl-device-utils.c',
))
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 9513aaac77..599c887616 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -58,6 +58,8 @@
#define CXL_DEVICE_CAP_HDR1_OFFSET 0x10 /* Figure 138 */
#define CXL_DEVICE_CAP_REG_SIZE 0x10 /* 8.2.8.2 */
#define CXL_DEVICE_CAPS_MAX 4 /* 8.2.8.2.1 + 8.2.8.5 */
+#define CXL_CAPS_SIZE \
+ (CXL_DEVICE_CAP_REG_SIZE * (CXL_DEVICE_CAPS_MAX + 1)) /* +1 for header */
#define CXL_DEVICE_STATUS_REGISTERS_OFFSET 0x80 /* Read comment above */
#define CXL_DEVICE_STATUS_REGISTERS_LENGTH 0x8 /* 8.2.8.3.1 */
@@ -70,12 +72,22 @@
#define CXL_MAILBOX_REGISTERS_LENGTH \
(CXL_MAILBOX_REGISTERS_SIZE + CXL_MAILBOX_MAX_PAYLOAD_SIZE)
+#define CXL_MMIO_SIZE \
+ (CXL_DEVICE_CAP_REG_SIZE + CXL_DEVICE_STATUS_REGISTERS_LENGTH + \
+ CXL_MAILBOX_REGISTERS_LENGTH)
+
typedef struct cxl_device_state {
MemoryRegion device_registers;
/* mmio for device capabilities array - 8.2.8.2 */
MemoryRegion device;
- MemoryRegion caps;
+ struct {
+ MemoryRegion caps;
+ union {
+ uint32_t caps_reg_state32[CXL_CAPS_SIZE / 4];
+ uint64_t caps_reg_state64[CXL_CAPS_SIZE / 8];
+ };
+ };
/* mmio for the mailbox registers 8.2.8.4 */
MemoryRegion mailbox;
@@ -128,6 +140,23 @@ CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE_STATUS, CXL_DEVICE_CAP_HDR1_OFFSET)
CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX, CXL_DEVICE_CAP_HDR1_OFFSET + \
CXL_DEVICE_CAP_REG_SIZE)
+#define cxl_device_cap_init(dstate, reg, cap_id) \
+ do { \
+ uint32_t *cap_hdrs = dstate->caps_reg_state32; \
+ int which = R_CXL_DEV_##reg##_CAP_HDR0; \
+ cap_hdrs[which] = \
+ FIELD_DP32(cap_hdrs[which], CXL_DEV_##reg##_CAP_HDR0, \
+ CAP_ID, cap_id); \
+ cap_hdrs[which] = FIELD_DP32( \
+ cap_hdrs[which], CXL_DEV_##reg##_CAP_HDR0, CAP_VERSION, 1); \
+ cap_hdrs[which + 1] = \
+ FIELD_DP32(cap_hdrs[which + 1], CXL_DEV_##reg##_CAP_HDR1, \
+ CAP_OFFSET, CXL_##reg##_REGISTERS_OFFSET); \
+ cap_hdrs[which + 2] = \
+ FIELD_DP32(cap_hdrs[which + 2], CXL_DEV_##reg##_CAP_HDR2, \
+ CAP_LENGTH, CXL_##reg##_REGISTERS_LENGTH); \
+ } while (0)
+
/* CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register */
REG32(CXL_DEV_MAILBOX_CAP, 0)
FIELD(CXL_DEV_MAILBOX_CAP, PAYLOAD_SIZE, 0, 5)
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 06/45] hw/cxl/device: Implement basic mailbox (8.2.8.4)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
This is the beginning of implementing mailbox support for CXL 2.0
devices. The implementation recognizes when the doorbell is rung,
handles the command/payload, clears the doorbell while returning error
codes and data.
Generally the mailbox mechanism is designed to permit communication
between the host OS and the firmware running on the device. For our
purposes, we emulate both the firmware, implemented primarily in
cxl-mailbox-utils.c, and the hardware.
No commands are implemented yet.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-device-utils.c | 122 ++++++++++++++++++++++++++-
hw/cxl/cxl-mailbox-utils.c | 164 ++++++++++++++++++++++++++++++++++++
hw/cxl/meson.build | 1 +
include/hw/cxl/cxl.h | 3 +
include/hw/cxl/cxl_device.h | 19 ++++-
5 files changed, 307 insertions(+), 2 deletions(-)
diff --git a/hw/cxl/cxl-device-utils.c b/hw/cxl/cxl-device-utils.c
index 241f9f82e3..f6c3e0f095 100644
--- a/hw/cxl/cxl-device-utils.c
+++ b/hw/cxl/cxl-device-utils.c
@@ -44,6 +44,108 @@ static uint64_t dev_reg_read(void *opaque, hwaddr offset, unsigned size)
return 0;
}
+static uint64_t mailbox_reg_read(void *opaque, hwaddr offset, unsigned size)
+{
+ CXLDeviceState *cxl_dstate = opaque;
+
+ switch (size) {
+ case 1:
+ return cxl_dstate->mbox_reg_state[offset];
+ case 2:
+ return cxl_dstate->mbox_reg_state16[offset / size];
+ case 4:
+ return cxl_dstate->mbox_reg_state32[offset / size];
+ case 8:
+ return cxl_dstate->mbox_reg_state64[offset / size];
+ default:
+ g_assert_not_reached();
+ }
+}
+
+static void mailbox_mem_writel(uint32_t *reg_state, hwaddr offset,
+ uint64_t value)
+{
+ switch (offset) {
+ case A_CXL_DEV_MAILBOX_CTRL:
+ /* fallthrough */
+ case A_CXL_DEV_MAILBOX_CAP:
+ /* RO register */
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP,
+ "%s Unexpected 32-bit access to 0x%" PRIx64 " (WI)\n",
+ __func__, offset);
+ return;
+ }
+
+ reg_state[offset / sizeof(*reg_state)] = value;
+}
+
+static void mailbox_mem_writeq(uint64_t *reg_state, hwaddr offset,
+ uint64_t value)
+{
+ switch (offset) {
+ case A_CXL_DEV_MAILBOX_CMD:
+ break;
+ case A_CXL_DEV_BG_CMD_STS:
+ /* BG not supported */
+ /* fallthrough */
+ case A_CXL_DEV_MAILBOX_STS:
+ /* Read only register, will get updated by the state machine */
+ return;
+ default:
+ qemu_log_mask(LOG_UNIMP,
+ "%s Unexpected 64-bit access to 0x%" PRIx64 " (WI)\n",
+ __func__, offset);
+ return;
+ }
+
+
+ reg_state[offset / sizeof(*reg_state)] = value;
+}
+
+static void mailbox_reg_write(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size)
+{
+ CXLDeviceState *cxl_dstate = opaque;
+
+ if (offset >= A_CXL_DEV_CMD_PAYLOAD) {
+ memcpy(cxl_dstate->mbox_reg_state + offset, &value, size);
+ return;
+ }
+
+ switch (size) {
+ case 4:
+ mailbox_mem_writel(cxl_dstate->mbox_reg_state32, offset, value);
+ break;
+ case 8:
+ mailbox_mem_writeq(cxl_dstate->mbox_reg_state64, offset, value);
+ break;
+ default:
+ g_assert_not_reached();
+ }
+
+ if (ARRAY_FIELD_EX32(cxl_dstate->mbox_reg_state32, CXL_DEV_MAILBOX_CTRL,
+ DOORBELL)) {
+ cxl_process_mailbox(cxl_dstate);
+ }
+}
+
+static const MemoryRegionOps mailbox_ops = {
+ .read = mailbox_reg_read,
+ .write = mailbox_reg_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = false,
+ },
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ },
+};
+
static const MemoryRegionOps dev_ops = {
.read = dev_reg_read,
.write = NULL, /* status register is read only */
@@ -84,20 +186,33 @@ void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
"cap-array", CXL_CAPS_SIZE);
memory_region_init_io(&cxl_dstate->device, obj, &dev_ops, cxl_dstate,
"device-status", CXL_DEVICE_STATUS_REGISTERS_LENGTH);
+ memory_region_init_io(&cxl_dstate->mailbox, obj, &mailbox_ops, cxl_dstate,
+ "mailbox", CXL_MAILBOX_REGISTERS_LENGTH);
memory_region_add_subregion(&cxl_dstate->device_registers, 0,
&cxl_dstate->caps);
memory_region_add_subregion(&cxl_dstate->device_registers,
CXL_DEVICE_STATUS_REGISTERS_OFFSET,
&cxl_dstate->device);
+ memory_region_add_subregion(&cxl_dstate->device_registers,
+ CXL_MAILBOX_REGISTERS_OFFSET,
+ &cxl_dstate->mailbox);
}
static void device_reg_init_common(CXLDeviceState *cxl_dstate) { }
+static void mailbox_reg_init_common(CXLDeviceState *cxl_dstate)
+{
+ /* 2048 payload size, with no interrupt or background support */
+ ARRAY_FIELD_DP32(cxl_dstate->mbox_reg_state32, CXL_DEV_MAILBOX_CAP,
+ PAYLOAD_SIZE, CXL_MAILBOX_PAYLOAD_SHIFT);
+ cxl_dstate->payload_size = CXL_MAILBOX_MAX_PAYLOAD_SIZE;
+}
+
void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
{
uint64_t *cap_hdrs = cxl_dstate->caps_reg_state64;
- const int cap_count = 1;
+ const int cap_count = 2;
/* CXL Device Capabilities Array Register */
ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_ID, 0);
@@ -106,4 +221,9 @@ void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
cxl_device_cap_init(cxl_dstate, DEVICE_STATUS, 1);
device_reg_init_common(cxl_dstate);
+
+ cxl_device_cap_init(cxl_dstate, MAILBOX, 2);
+ mailbox_reg_init_common(cxl_dstate);
+
+ assert(cxl_initialize_mailbox(cxl_dstate) == 0);
}
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
new file mode 100644
index 0000000000..2557f41f61
--- /dev/null
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -0,0 +1,164 @@
+/*
+ * CXL Utility library for mailbox interface
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/cxl/cxl.h"
+#include "hw/pci/pci.h"
+#include "qemu/log.h"
+#include "qemu/uuid.h"
+
+/*
+ * How to add a new command, example. The command set FOO, with cmd BAR.
+ * 1. Add the command set and cmd to the enum.
+ * FOO = 0x7f,
+ * #define BAR 0
+ * 2. Implement the handler
+ * static ret_code cmd_foo_bar(struct cxl_cmd *cmd,
+ * CXLDeviceState *cxl_dstate, uint16_t *len)
+ * 3. Add the command to the cxl_cmd_set[][]
+ * [FOO][BAR] = { "FOO_BAR", cmd_foo_bar, x, y },
+ * 4. Implement your handler
+ * define_mailbox_handler(FOO_BAR) { ... return CXL_MBOX_SUCCESS; }
+ *
+ *
+ * Writing the handler:
+ * The handler will provide the &struct cxl_cmd, the &CXLDeviceState, and the
+ * in/out length of the payload. The handler is responsible for consuming the
+ * payload from cmd->payload and operating upon it as necessary. It must then
+ * fill the output data into cmd->payload (overwriting what was there),
+ * setting the length, and returning a valid return code.
+ *
+ * XXX: The handler need not worry about endianess. The payload is read out of
+ * a register interface that already deals with it.
+ */
+
+/* 8.2.8.4.5.1 Command Return Codes */
+typedef enum {
+ CXL_MBOX_SUCCESS = 0x0,
+ CXL_MBOX_BG_STARTED = 0x1,
+ CXL_MBOX_INVALID_INPUT = 0x2,
+ CXL_MBOX_UNSUPPORTED = 0x3,
+ CXL_MBOX_INTERNAL_ERROR = 0x4,
+ CXL_MBOX_RETRY_REQUIRED = 0x5,
+ CXL_MBOX_BUSY = 0x6,
+ CXL_MBOX_MEDIA_DISABLED = 0x7,
+ CXL_MBOX_FW_XFER_IN_PROGRESS = 0x8,
+ CXL_MBOX_FW_XFER_OUT_OF_ORDER = 0x9,
+ CXL_MBOX_FW_AUTH_FAILED = 0xa,
+ CXL_MBOX_FW_INVALID_SLOT = 0xb,
+ CXL_MBOX_FW_ROLLEDBACK = 0xc,
+ CXL_MBOX_FW_REST_REQD = 0xd,
+ CXL_MBOX_INVALID_HANDLE = 0xe,
+ CXL_MBOX_INVALID_PA = 0xf,
+ CXL_MBOX_INJECT_POISON_LIMIT = 0x10,
+ CXL_MBOX_PERMANENT_MEDIA_FAILURE = 0x11,
+ CXL_MBOX_ABORTED = 0x12,
+ CXL_MBOX_INVALID_SECURITY_STATE = 0x13,
+ CXL_MBOX_INCORRECT_PASSPHRASE = 0x14,
+ CXL_MBOX_UNSUPPORTED_MAILBOX = 0x15,
+ CXL_MBOX_INVALID_PAYLOAD_LENGTH = 0x16,
+ CXL_MBOX_MAX = 0x17
+} ret_code;
+
+struct cxl_cmd;
+typedef ret_code (*opcode_handler)(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate, uint16_t *len);
+struct cxl_cmd {
+ const char *name;
+ opcode_handler handler;
+ ssize_t in;
+ uint16_t effect; /* Reported in CEL */
+ uint8_t *payload;
+};
+
+#define DEFINE_MAILBOX_HANDLER_ZEROED(name, size) \
+ uint16_t __zero##name = size; \
+ static ret_code cmd_##name(struct cxl_cmd *cmd, \
+ CXLDeviceState *cxl_dstate, uint16_t *len) \
+ { \
+ *len = __zero##name; \
+ memset(cmd->payload, 0, *len); \
+ return CXL_MBOX_SUCCESS; \
+ }
+#define DEFINE_MAILBOX_HANDLER_NOP(name) \
+ static ret_code cmd_##name(struct cxl_cmd *cmd, \
+ CXLDeviceState *cxl_dstate, uint16_t *len) \
+ { \
+ return CXL_MBOX_SUCCESS; \
+ }
+
+static QemuUUID cel_uuid;
+
+static struct cxl_cmd cxl_cmd_set[256][256] = {};
+
+void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+{
+ uint16_t ret = CXL_MBOX_SUCCESS;
+ struct cxl_cmd *cxl_cmd;
+ uint64_t status_reg;
+ opcode_handler h;
+ uint64_t command_reg = cxl_dstate->mbox_reg_state64[R_CXL_DEV_MAILBOX_CMD];
+
+ uint8_t set = FIELD_EX64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND_SET);
+ uint8_t cmd = FIELD_EX64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND);
+ uint16_t len = FIELD_EX64(command_reg, CXL_DEV_MAILBOX_CMD, LENGTH);
+ cxl_cmd = &cxl_cmd_set[set][cmd];
+ h = cxl_cmd->handler;
+ if (h) {
+ if (len == cxl_cmd->in) {
+ cxl_cmd->payload = cxl_dstate->mbox_reg_state +
+ A_CXL_DEV_CMD_PAYLOAD;
+ ret = (*h)(cxl_cmd, cxl_dstate, &len);
+ assert(len <= cxl_dstate->payload_size);
+ } else {
+ ret = CXL_MBOX_INVALID_PAYLOAD_LENGTH;
+ }
+ } else {
+ qemu_log_mask(LOG_UNIMP, "Command %04xh not implemented\n",
+ set << 8 | cmd);
+ ret = CXL_MBOX_UNSUPPORTED;
+ }
+
+ /* Set the return code */
+ status_reg = FIELD_DP64(0, CXL_DEV_MAILBOX_STS, ERRNO, ret);
+
+ /* Set the return length */
+ command_reg = FIELD_DP64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND_SET, 0);
+ command_reg = FIELD_DP64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND, 0);
+ command_reg = FIELD_DP64(command_reg, CXL_DEV_MAILBOX_CMD, LENGTH, len);
+
+ cxl_dstate->mbox_reg_state64[R_CXL_DEV_MAILBOX_CMD] = command_reg;
+ cxl_dstate->mbox_reg_state64[R_CXL_DEV_MAILBOX_STS] = status_reg;
+
+ /* Tell the host we're done */
+ ARRAY_FIELD_DP32(cxl_dstate->mbox_reg_state32, CXL_DEV_MAILBOX_CTRL,
+ DOORBELL, 0);
+}
+
+int cxl_initialize_mailbox(CXLDeviceState *cxl_dstate)
+{
+ /* CXL 2.0: Table 169 Get Supported Logs Log Entry */
+ const char *cel_uuidstr = "0da9c0b5-bf41-4b78-8f79-96b1623b3f17";
+
+ for (int set = 0; set < 256; set++) {
+ for (int cmd = 0; cmd < 256; cmd++) {
+ if (cxl_cmd_set[set][cmd].handler) {
+ struct cxl_cmd *c = &cxl_cmd_set[set][cmd];
+ struct cel_log *log =
+ &cxl_dstate->cel_log[cxl_dstate->cel_size];
+
+ log->opcode = (set << 8) | cmd;
+ log->effect = c->effect;
+ cxl_dstate->cel_size++;
+ }
+ }
+ }
+
+ return qemu_uuid_parse(cel_uuidstr, &cel_uuid);
+}
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
index dd7c6f8e5a..e68eea2358 100644
--- a/hw/cxl/meson.build
+++ b/hw/cxl/meson.build
@@ -2,4 +2,5 @@ softmmu_ss.add(when: 'CONFIG_CXL',
if_true: files(
'cxl-component-utils.c',
'cxl-device-utils.c',
+ 'cxl-mailbox-utils.c',
))
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index b9d1ac3fad..554ad93b6b 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -14,4 +14,7 @@
#include "cxl_component.h"
#include "cxl_device.h"
+#define CXL_COMPONENT_REG_BAR_IDX 0
+#define CXL_DEVICE_REG_BAR_IDX 2
+
#endif
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 599c887616..35489f635a 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -90,7 +90,21 @@ typedef struct cxl_device_state {
};
/* mmio for the mailbox registers 8.2.8.4 */
- MemoryRegion mailbox;
+ struct {
+ MemoryRegion mailbox;
+ uint16_t payload_size;
+ union {
+ uint8_t mbox_reg_state[CXL_MAILBOX_REGISTERS_LENGTH];
+ uint16_t mbox_reg_state16[CXL_MAILBOX_REGISTERS_LENGTH / 2];
+ uint32_t mbox_reg_state32[CXL_MAILBOX_REGISTERS_LENGTH / 4];
+ uint64_t mbox_reg_state64[CXL_MAILBOX_REGISTERS_LENGTH / 8];
+ };
+ struct cel_log {
+ uint16_t opcode;
+ uint16_t effect;
+ } cel_log[1 << 16];
+ size_t cel_size;
+ };
/* memory region for persistent memory, HDM */
uint64_t pmem_size;
@@ -140,6 +154,9 @@ CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE_STATUS, CXL_DEVICE_CAP_HDR1_OFFSET)
CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX, CXL_DEVICE_CAP_HDR1_OFFSET + \
CXL_DEVICE_CAP_REG_SIZE)
+int cxl_initialize_mailbox(CXLDeviceState *cxl_dstate);
+void cxl_process_mailbox(CXLDeviceState *cxl_dstate);
+
#define cxl_device_cap_init(dstate, reg, cap_id) \
do { \
uint32_t *cap_hdrs = dstate->caps_reg_state32; \
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 06/45] hw/cxl/device: Implement basic mailbox (8.2.8.4)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
This is the beginning of implementing mailbox support for CXL 2.0
devices. The implementation recognizes when the doorbell is rung,
handles the command/payload, clears the doorbell while returning error
codes and data.
Generally the mailbox mechanism is designed to permit communication
between the host OS and the firmware running on the device. For our
purposes, we emulate both the firmware, implemented primarily in
cxl-mailbox-utils.c, and the hardware.
No commands are implemented yet.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-device-utils.c | 122 ++++++++++++++++++++++++++-
hw/cxl/cxl-mailbox-utils.c | 164 ++++++++++++++++++++++++++++++++++++
hw/cxl/meson.build | 1 +
include/hw/cxl/cxl.h | 3 +
include/hw/cxl/cxl_device.h | 19 ++++-
5 files changed, 307 insertions(+), 2 deletions(-)
diff --git a/hw/cxl/cxl-device-utils.c b/hw/cxl/cxl-device-utils.c
index 241f9f82e3..f6c3e0f095 100644
--- a/hw/cxl/cxl-device-utils.c
+++ b/hw/cxl/cxl-device-utils.c
@@ -44,6 +44,108 @@ static uint64_t dev_reg_read(void *opaque, hwaddr offset, unsigned size)
return 0;
}
+static uint64_t mailbox_reg_read(void *opaque, hwaddr offset, unsigned size)
+{
+ CXLDeviceState *cxl_dstate = opaque;
+
+ switch (size) {
+ case 1:
+ return cxl_dstate->mbox_reg_state[offset];
+ case 2:
+ return cxl_dstate->mbox_reg_state16[offset / size];
+ case 4:
+ return cxl_dstate->mbox_reg_state32[offset / size];
+ case 8:
+ return cxl_dstate->mbox_reg_state64[offset / size];
+ default:
+ g_assert_not_reached();
+ }
+}
+
+static void mailbox_mem_writel(uint32_t *reg_state, hwaddr offset,
+ uint64_t value)
+{
+ switch (offset) {
+ case A_CXL_DEV_MAILBOX_CTRL:
+ /* fallthrough */
+ case A_CXL_DEV_MAILBOX_CAP:
+ /* RO register */
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP,
+ "%s Unexpected 32-bit access to 0x%" PRIx64 " (WI)\n",
+ __func__, offset);
+ return;
+ }
+
+ reg_state[offset / sizeof(*reg_state)] = value;
+}
+
+static void mailbox_mem_writeq(uint64_t *reg_state, hwaddr offset,
+ uint64_t value)
+{
+ switch (offset) {
+ case A_CXL_DEV_MAILBOX_CMD:
+ break;
+ case A_CXL_DEV_BG_CMD_STS:
+ /* BG not supported */
+ /* fallthrough */
+ case A_CXL_DEV_MAILBOX_STS:
+ /* Read only register, will get updated by the state machine */
+ return;
+ default:
+ qemu_log_mask(LOG_UNIMP,
+ "%s Unexpected 64-bit access to 0x%" PRIx64 " (WI)\n",
+ __func__, offset);
+ return;
+ }
+
+
+ reg_state[offset / sizeof(*reg_state)] = value;
+}
+
+static void mailbox_reg_write(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size)
+{
+ CXLDeviceState *cxl_dstate = opaque;
+
+ if (offset >= A_CXL_DEV_CMD_PAYLOAD) {
+ memcpy(cxl_dstate->mbox_reg_state + offset, &value, size);
+ return;
+ }
+
+ switch (size) {
+ case 4:
+ mailbox_mem_writel(cxl_dstate->mbox_reg_state32, offset, value);
+ break;
+ case 8:
+ mailbox_mem_writeq(cxl_dstate->mbox_reg_state64, offset, value);
+ break;
+ default:
+ g_assert_not_reached();
+ }
+
+ if (ARRAY_FIELD_EX32(cxl_dstate->mbox_reg_state32, CXL_DEV_MAILBOX_CTRL,
+ DOORBELL)) {
+ cxl_process_mailbox(cxl_dstate);
+ }
+}
+
+static const MemoryRegionOps mailbox_ops = {
+ .read = mailbox_reg_read,
+ .write = mailbox_reg_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = false,
+ },
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ },
+};
+
static const MemoryRegionOps dev_ops = {
.read = dev_reg_read,
.write = NULL, /* status register is read only */
@@ -84,20 +186,33 @@ void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
"cap-array", CXL_CAPS_SIZE);
memory_region_init_io(&cxl_dstate->device, obj, &dev_ops, cxl_dstate,
"device-status", CXL_DEVICE_STATUS_REGISTERS_LENGTH);
+ memory_region_init_io(&cxl_dstate->mailbox, obj, &mailbox_ops, cxl_dstate,
+ "mailbox", CXL_MAILBOX_REGISTERS_LENGTH);
memory_region_add_subregion(&cxl_dstate->device_registers, 0,
&cxl_dstate->caps);
memory_region_add_subregion(&cxl_dstate->device_registers,
CXL_DEVICE_STATUS_REGISTERS_OFFSET,
&cxl_dstate->device);
+ memory_region_add_subregion(&cxl_dstate->device_registers,
+ CXL_MAILBOX_REGISTERS_OFFSET,
+ &cxl_dstate->mailbox);
}
static void device_reg_init_common(CXLDeviceState *cxl_dstate) { }
+static void mailbox_reg_init_common(CXLDeviceState *cxl_dstate)
+{
+ /* 2048 payload size, with no interrupt or background support */
+ ARRAY_FIELD_DP32(cxl_dstate->mbox_reg_state32, CXL_DEV_MAILBOX_CAP,
+ PAYLOAD_SIZE, CXL_MAILBOX_PAYLOAD_SHIFT);
+ cxl_dstate->payload_size = CXL_MAILBOX_MAX_PAYLOAD_SIZE;
+}
+
void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
{
uint64_t *cap_hdrs = cxl_dstate->caps_reg_state64;
- const int cap_count = 1;
+ const int cap_count = 2;
/* CXL Device Capabilities Array Register */
ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_ID, 0);
@@ -106,4 +221,9 @@ void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
cxl_device_cap_init(cxl_dstate, DEVICE_STATUS, 1);
device_reg_init_common(cxl_dstate);
+
+ cxl_device_cap_init(cxl_dstate, MAILBOX, 2);
+ mailbox_reg_init_common(cxl_dstate);
+
+ assert(cxl_initialize_mailbox(cxl_dstate) == 0);
}
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
new file mode 100644
index 0000000000..2557f41f61
--- /dev/null
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -0,0 +1,164 @@
+/*
+ * CXL Utility library for mailbox interface
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/cxl/cxl.h"
+#include "hw/pci/pci.h"
+#include "qemu/log.h"
+#include "qemu/uuid.h"
+
+/*
+ * How to add a new command, example. The command set FOO, with cmd BAR.
+ * 1. Add the command set and cmd to the enum.
+ * FOO = 0x7f,
+ * #define BAR 0
+ * 2. Implement the handler
+ * static ret_code cmd_foo_bar(struct cxl_cmd *cmd,
+ * CXLDeviceState *cxl_dstate, uint16_t *len)
+ * 3. Add the command to the cxl_cmd_set[][]
+ * [FOO][BAR] = { "FOO_BAR", cmd_foo_bar, x, y },
+ * 4. Implement your handler
+ * define_mailbox_handler(FOO_BAR) { ... return CXL_MBOX_SUCCESS; }
+ *
+ *
+ * Writing the handler:
+ * The handler will provide the &struct cxl_cmd, the &CXLDeviceState, and the
+ * in/out length of the payload. The handler is responsible for consuming the
+ * payload from cmd->payload and operating upon it as necessary. It must then
+ * fill the output data into cmd->payload (overwriting what was there),
+ * setting the length, and returning a valid return code.
+ *
+ * XXX: The handler need not worry about endianess. The payload is read out of
+ * a register interface that already deals with it.
+ */
+
+/* 8.2.8.4.5.1 Command Return Codes */
+typedef enum {
+ CXL_MBOX_SUCCESS = 0x0,
+ CXL_MBOX_BG_STARTED = 0x1,
+ CXL_MBOX_INVALID_INPUT = 0x2,
+ CXL_MBOX_UNSUPPORTED = 0x3,
+ CXL_MBOX_INTERNAL_ERROR = 0x4,
+ CXL_MBOX_RETRY_REQUIRED = 0x5,
+ CXL_MBOX_BUSY = 0x6,
+ CXL_MBOX_MEDIA_DISABLED = 0x7,
+ CXL_MBOX_FW_XFER_IN_PROGRESS = 0x8,
+ CXL_MBOX_FW_XFER_OUT_OF_ORDER = 0x9,
+ CXL_MBOX_FW_AUTH_FAILED = 0xa,
+ CXL_MBOX_FW_INVALID_SLOT = 0xb,
+ CXL_MBOX_FW_ROLLEDBACK = 0xc,
+ CXL_MBOX_FW_REST_REQD = 0xd,
+ CXL_MBOX_INVALID_HANDLE = 0xe,
+ CXL_MBOX_INVALID_PA = 0xf,
+ CXL_MBOX_INJECT_POISON_LIMIT = 0x10,
+ CXL_MBOX_PERMANENT_MEDIA_FAILURE = 0x11,
+ CXL_MBOX_ABORTED = 0x12,
+ CXL_MBOX_INVALID_SECURITY_STATE = 0x13,
+ CXL_MBOX_INCORRECT_PASSPHRASE = 0x14,
+ CXL_MBOX_UNSUPPORTED_MAILBOX = 0x15,
+ CXL_MBOX_INVALID_PAYLOAD_LENGTH = 0x16,
+ CXL_MBOX_MAX = 0x17
+} ret_code;
+
+struct cxl_cmd;
+typedef ret_code (*opcode_handler)(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate, uint16_t *len);
+struct cxl_cmd {
+ const char *name;
+ opcode_handler handler;
+ ssize_t in;
+ uint16_t effect; /* Reported in CEL */
+ uint8_t *payload;
+};
+
+#define DEFINE_MAILBOX_HANDLER_ZEROED(name, size) \
+ uint16_t __zero##name = size; \
+ static ret_code cmd_##name(struct cxl_cmd *cmd, \
+ CXLDeviceState *cxl_dstate, uint16_t *len) \
+ { \
+ *len = __zero##name; \
+ memset(cmd->payload, 0, *len); \
+ return CXL_MBOX_SUCCESS; \
+ }
+#define DEFINE_MAILBOX_HANDLER_NOP(name) \
+ static ret_code cmd_##name(struct cxl_cmd *cmd, \
+ CXLDeviceState *cxl_dstate, uint16_t *len) \
+ { \
+ return CXL_MBOX_SUCCESS; \
+ }
+
+static QemuUUID cel_uuid;
+
+static struct cxl_cmd cxl_cmd_set[256][256] = {};
+
+void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
+{
+ uint16_t ret = CXL_MBOX_SUCCESS;
+ struct cxl_cmd *cxl_cmd;
+ uint64_t status_reg;
+ opcode_handler h;
+ uint64_t command_reg = cxl_dstate->mbox_reg_state64[R_CXL_DEV_MAILBOX_CMD];
+
+ uint8_t set = FIELD_EX64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND_SET);
+ uint8_t cmd = FIELD_EX64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND);
+ uint16_t len = FIELD_EX64(command_reg, CXL_DEV_MAILBOX_CMD, LENGTH);
+ cxl_cmd = &cxl_cmd_set[set][cmd];
+ h = cxl_cmd->handler;
+ if (h) {
+ if (len == cxl_cmd->in) {
+ cxl_cmd->payload = cxl_dstate->mbox_reg_state +
+ A_CXL_DEV_CMD_PAYLOAD;
+ ret = (*h)(cxl_cmd, cxl_dstate, &len);
+ assert(len <= cxl_dstate->payload_size);
+ } else {
+ ret = CXL_MBOX_INVALID_PAYLOAD_LENGTH;
+ }
+ } else {
+ qemu_log_mask(LOG_UNIMP, "Command %04xh not implemented\n",
+ set << 8 | cmd);
+ ret = CXL_MBOX_UNSUPPORTED;
+ }
+
+ /* Set the return code */
+ status_reg = FIELD_DP64(0, CXL_DEV_MAILBOX_STS, ERRNO, ret);
+
+ /* Set the return length */
+ command_reg = FIELD_DP64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND_SET, 0);
+ command_reg = FIELD_DP64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND, 0);
+ command_reg = FIELD_DP64(command_reg, CXL_DEV_MAILBOX_CMD, LENGTH, len);
+
+ cxl_dstate->mbox_reg_state64[R_CXL_DEV_MAILBOX_CMD] = command_reg;
+ cxl_dstate->mbox_reg_state64[R_CXL_DEV_MAILBOX_STS] = status_reg;
+
+ /* Tell the host we're done */
+ ARRAY_FIELD_DP32(cxl_dstate->mbox_reg_state32, CXL_DEV_MAILBOX_CTRL,
+ DOORBELL, 0);
+}
+
+int cxl_initialize_mailbox(CXLDeviceState *cxl_dstate)
+{
+ /* CXL 2.0: Table 169 Get Supported Logs Log Entry */
+ const char *cel_uuidstr = "0da9c0b5-bf41-4b78-8f79-96b1623b3f17";
+
+ for (int set = 0; set < 256; set++) {
+ for (int cmd = 0; cmd < 256; cmd++) {
+ if (cxl_cmd_set[set][cmd].handler) {
+ struct cxl_cmd *c = &cxl_cmd_set[set][cmd];
+ struct cel_log *log =
+ &cxl_dstate->cel_log[cxl_dstate->cel_size];
+
+ log->opcode = (set << 8) | cmd;
+ log->effect = c->effect;
+ cxl_dstate->cel_size++;
+ }
+ }
+ }
+
+ return qemu_uuid_parse(cel_uuidstr, &cel_uuid);
+}
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
index dd7c6f8e5a..e68eea2358 100644
--- a/hw/cxl/meson.build
+++ b/hw/cxl/meson.build
@@ -2,4 +2,5 @@ softmmu_ss.add(when: 'CONFIG_CXL',
if_true: files(
'cxl-component-utils.c',
'cxl-device-utils.c',
+ 'cxl-mailbox-utils.c',
))
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index b9d1ac3fad..554ad93b6b 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -14,4 +14,7 @@
#include "cxl_component.h"
#include "cxl_device.h"
+#define CXL_COMPONENT_REG_BAR_IDX 0
+#define CXL_DEVICE_REG_BAR_IDX 2
+
#endif
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 599c887616..35489f635a 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -90,7 +90,21 @@ typedef struct cxl_device_state {
};
/* mmio for the mailbox registers 8.2.8.4 */
- MemoryRegion mailbox;
+ struct {
+ MemoryRegion mailbox;
+ uint16_t payload_size;
+ union {
+ uint8_t mbox_reg_state[CXL_MAILBOX_REGISTERS_LENGTH];
+ uint16_t mbox_reg_state16[CXL_MAILBOX_REGISTERS_LENGTH / 2];
+ uint32_t mbox_reg_state32[CXL_MAILBOX_REGISTERS_LENGTH / 4];
+ uint64_t mbox_reg_state64[CXL_MAILBOX_REGISTERS_LENGTH / 8];
+ };
+ struct cel_log {
+ uint16_t opcode;
+ uint16_t effect;
+ } cel_log[1 << 16];
+ size_t cel_size;
+ };
/* memory region for persistent memory, HDM */
uint64_t pmem_size;
@@ -140,6 +154,9 @@ CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE_STATUS, CXL_DEVICE_CAP_HDR1_OFFSET)
CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX, CXL_DEVICE_CAP_HDR1_OFFSET + \
CXL_DEVICE_CAP_REG_SIZE)
+int cxl_initialize_mailbox(CXLDeviceState *cxl_dstate);
+void cxl_process_mailbox(CXLDeviceState *cxl_dstate);
+
#define cxl_device_cap_init(dstate, reg, cap_id) \
do { \
uint32_t *cap_hdrs = dstate->caps_reg_state32; \
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 07/45] hw/cxl/device: Add memory device utilities
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
Memory devices implement extra capabilities on top of CXL devices. This
adds support for that.
A large part of memory devices is the mailbox/command interface. All of
the mailbox handling is done in the mailbox-utils library. Longer term,
new CXL devices that are being emulated may want to handle commands
differently, and therefore would need a mechanism to opt in/out of the
specific generic handlers. As such, this is considered sufficient for
now, but may need more depth in the future.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-device-utils.c | 38 ++++++++++++++++++++++++++++++++++++-
include/hw/cxl/cxl_device.h | 21 +++++++++++++++++---
2 files changed, 55 insertions(+), 4 deletions(-)
diff --git a/hw/cxl/cxl-device-utils.c b/hw/cxl/cxl-device-utils.c
index f6c3e0f095..687759b301 100644
--- a/hw/cxl/cxl-device-utils.c
+++ b/hw/cxl/cxl-device-utils.c
@@ -131,6 +131,31 @@ static void mailbox_reg_write(void *opaque, hwaddr offset, uint64_t value,
}
}
+static uint64_t mdev_reg_read(void *opaque, hwaddr offset, unsigned size)
+{
+ uint64_t retval = 0;
+
+ retval = FIELD_DP64(retval, CXL_MEM_DEV_STS, MEDIA_STATUS, 1);
+ retval = FIELD_DP64(retval, CXL_MEM_DEV_STS, MBOX_READY, 1);
+
+ return retval;
+}
+
+static const MemoryRegionOps mdev_ops = {
+ .read = mdev_reg_read,
+ .write = NULL, /* memory device register is read only */
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = false,
+ },
+ .impl = {
+ .min_access_size = 8,
+ .max_access_size = 8,
+ },
+};
+
static const MemoryRegionOps mailbox_ops = {
.read = mailbox_reg_read,
.write = mailbox_reg_write,
@@ -188,6 +213,9 @@ void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
"device-status", CXL_DEVICE_STATUS_REGISTERS_LENGTH);
memory_region_init_io(&cxl_dstate->mailbox, obj, &mailbox_ops, cxl_dstate,
"mailbox", CXL_MAILBOX_REGISTERS_LENGTH);
+ memory_region_init_io(&cxl_dstate->memory_device, obj, &mdev_ops,
+ cxl_dstate, "memory device caps",
+ CXL_MEMORY_DEVICE_REGISTERS_LENGTH);
memory_region_add_subregion(&cxl_dstate->device_registers, 0,
&cxl_dstate->caps);
@@ -197,6 +225,9 @@ void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
memory_region_add_subregion(&cxl_dstate->device_registers,
CXL_MAILBOX_REGISTERS_OFFSET,
&cxl_dstate->mailbox);
+ memory_region_add_subregion(&cxl_dstate->device_registers,
+ CXL_MEMORY_DEVICE_REGISTERS_OFFSET,
+ &cxl_dstate->memory_device);
}
static void device_reg_init_common(CXLDeviceState *cxl_dstate) { }
@@ -209,10 +240,12 @@ static void mailbox_reg_init_common(CXLDeviceState *cxl_dstate)
cxl_dstate->payload_size = CXL_MAILBOX_MAX_PAYLOAD_SIZE;
}
+static void memdev_reg_init_common(CXLDeviceState *cxl_dstate) { }
+
void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
{
uint64_t *cap_hdrs = cxl_dstate->caps_reg_state64;
- const int cap_count = 2;
+ const int cap_count = 3;
/* CXL Device Capabilities Array Register */
ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_ID, 0);
@@ -225,5 +258,8 @@ void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
cxl_device_cap_init(cxl_dstate, MAILBOX, 2);
mailbox_reg_init_common(cxl_dstate);
+ cxl_device_cap_init(cxl_dstate, MEMORY_DEVICE, 0x4000);
+ memdev_reg_init_common(cxl_dstate);
+
assert(cxl_initialize_mailbox(cxl_dstate) == 0);
}
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 35489f635a..954205653e 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -72,15 +72,20 @@
#define CXL_MAILBOX_REGISTERS_LENGTH \
(CXL_MAILBOX_REGISTERS_SIZE + CXL_MAILBOX_MAX_PAYLOAD_SIZE)
-#define CXL_MMIO_SIZE \
- (CXL_DEVICE_CAP_REG_SIZE + CXL_DEVICE_STATUS_REGISTERS_LENGTH + \
- CXL_MAILBOX_REGISTERS_LENGTH)
+#define CXL_MEMORY_DEVICE_REGISTERS_OFFSET \
+ (CXL_MAILBOX_REGISTERS_OFFSET + CXL_MAILBOX_REGISTERS_LENGTH)
+#define CXL_MEMORY_DEVICE_REGISTERS_LENGTH 0x8
+
+#define CXL_MMIO_SIZE \
+ (CXL_DEVICE_CAP_REG_SIZE + CXL_DEVICE_STATUS_REGISTERS_LENGTH + \
+ CXL_MAILBOX_REGISTERS_LENGTH + CXL_MEMORY_DEVICE_REGISTERS_LENGTH)
typedef struct cxl_device_state {
MemoryRegion device_registers;
/* mmio for device capabilities array - 8.2.8.2 */
MemoryRegion device;
+ MemoryRegion memory_device;
struct {
MemoryRegion caps;
union {
@@ -153,6 +158,9 @@ REG64(CXL_DEV_CAP_ARRAY, 0) /* Documented as 128 bit register but 64 byte access
CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE_STATUS, CXL_DEVICE_CAP_HDR1_OFFSET)
CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX, CXL_DEVICE_CAP_HDR1_OFFSET + \
CXL_DEVICE_CAP_REG_SIZE)
+CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MEMORY_DEVICE,
+ CXL_DEVICE_CAP_HDR1_OFFSET +
+ CXL_DEVICE_CAP_REG_SIZE * 2)
int cxl_initialize_mailbox(CXLDeviceState *cxl_dstate);
void cxl_process_mailbox(CXLDeviceState *cxl_dstate);
@@ -209,4 +217,11 @@ REG64(CXL_DEV_BG_CMD_STS, 0x18)
/* CXL 2.0 8.2.8.4.8 Command Payload Registers */
REG32(CXL_DEV_CMD_PAYLOAD, 0x20)
+REG64(CXL_MEM_DEV_STS, 0)
+ FIELD(CXL_MEM_DEV_STS, FATAL, 0, 1)
+ FIELD(CXL_MEM_DEV_STS, FW_HALT, 1, 1)
+ FIELD(CXL_MEM_DEV_STS, MEDIA_STATUS, 2, 2)
+ FIELD(CXL_MEM_DEV_STS, MBOX_READY, 4, 1)
+ FIELD(CXL_MEM_DEV_STS, RESET_NEEDED, 5, 3)
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 07/45] hw/cxl/device: Add memory device utilities
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
Memory devices implement extra capabilities on top of CXL devices. This
adds support for that.
A large part of memory devices is the mailbox/command interface. All of
the mailbox handling is done in the mailbox-utils library. Longer term,
new CXL devices that are being emulated may want to handle commands
differently, and therefore would need a mechanism to opt in/out of the
specific generic handlers. As such, this is considered sufficient for
now, but may need more depth in the future.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-device-utils.c | 38 ++++++++++++++++++++++++++++++++++++-
include/hw/cxl/cxl_device.h | 21 +++++++++++++++++---
2 files changed, 55 insertions(+), 4 deletions(-)
diff --git a/hw/cxl/cxl-device-utils.c b/hw/cxl/cxl-device-utils.c
index f6c3e0f095..687759b301 100644
--- a/hw/cxl/cxl-device-utils.c
+++ b/hw/cxl/cxl-device-utils.c
@@ -131,6 +131,31 @@ static void mailbox_reg_write(void *opaque, hwaddr offset, uint64_t value,
}
}
+static uint64_t mdev_reg_read(void *opaque, hwaddr offset, unsigned size)
+{
+ uint64_t retval = 0;
+
+ retval = FIELD_DP64(retval, CXL_MEM_DEV_STS, MEDIA_STATUS, 1);
+ retval = FIELD_DP64(retval, CXL_MEM_DEV_STS, MBOX_READY, 1);
+
+ return retval;
+}
+
+static const MemoryRegionOps mdev_ops = {
+ .read = mdev_reg_read,
+ .write = NULL, /* memory device register is read only */
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = false,
+ },
+ .impl = {
+ .min_access_size = 8,
+ .max_access_size = 8,
+ },
+};
+
static const MemoryRegionOps mailbox_ops = {
.read = mailbox_reg_read,
.write = mailbox_reg_write,
@@ -188,6 +213,9 @@ void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
"device-status", CXL_DEVICE_STATUS_REGISTERS_LENGTH);
memory_region_init_io(&cxl_dstate->mailbox, obj, &mailbox_ops, cxl_dstate,
"mailbox", CXL_MAILBOX_REGISTERS_LENGTH);
+ memory_region_init_io(&cxl_dstate->memory_device, obj, &mdev_ops,
+ cxl_dstate, "memory device caps",
+ CXL_MEMORY_DEVICE_REGISTERS_LENGTH);
memory_region_add_subregion(&cxl_dstate->device_registers, 0,
&cxl_dstate->caps);
@@ -197,6 +225,9 @@ void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
memory_region_add_subregion(&cxl_dstate->device_registers,
CXL_MAILBOX_REGISTERS_OFFSET,
&cxl_dstate->mailbox);
+ memory_region_add_subregion(&cxl_dstate->device_registers,
+ CXL_MEMORY_DEVICE_REGISTERS_OFFSET,
+ &cxl_dstate->memory_device);
}
static void device_reg_init_common(CXLDeviceState *cxl_dstate) { }
@@ -209,10 +240,12 @@ static void mailbox_reg_init_common(CXLDeviceState *cxl_dstate)
cxl_dstate->payload_size = CXL_MAILBOX_MAX_PAYLOAD_SIZE;
}
+static void memdev_reg_init_common(CXLDeviceState *cxl_dstate) { }
+
void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
{
uint64_t *cap_hdrs = cxl_dstate->caps_reg_state64;
- const int cap_count = 2;
+ const int cap_count = 3;
/* CXL Device Capabilities Array Register */
ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_ID, 0);
@@ -225,5 +258,8 @@ void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
cxl_device_cap_init(cxl_dstate, MAILBOX, 2);
mailbox_reg_init_common(cxl_dstate);
+ cxl_device_cap_init(cxl_dstate, MEMORY_DEVICE, 0x4000);
+ memdev_reg_init_common(cxl_dstate);
+
assert(cxl_initialize_mailbox(cxl_dstate) == 0);
}
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 35489f635a..954205653e 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -72,15 +72,20 @@
#define CXL_MAILBOX_REGISTERS_LENGTH \
(CXL_MAILBOX_REGISTERS_SIZE + CXL_MAILBOX_MAX_PAYLOAD_SIZE)
-#define CXL_MMIO_SIZE \
- (CXL_DEVICE_CAP_REG_SIZE + CXL_DEVICE_STATUS_REGISTERS_LENGTH + \
- CXL_MAILBOX_REGISTERS_LENGTH)
+#define CXL_MEMORY_DEVICE_REGISTERS_OFFSET \
+ (CXL_MAILBOX_REGISTERS_OFFSET + CXL_MAILBOX_REGISTERS_LENGTH)
+#define CXL_MEMORY_DEVICE_REGISTERS_LENGTH 0x8
+
+#define CXL_MMIO_SIZE \
+ (CXL_DEVICE_CAP_REG_SIZE + CXL_DEVICE_STATUS_REGISTERS_LENGTH + \
+ CXL_MAILBOX_REGISTERS_LENGTH + CXL_MEMORY_DEVICE_REGISTERS_LENGTH)
typedef struct cxl_device_state {
MemoryRegion device_registers;
/* mmio for device capabilities array - 8.2.8.2 */
MemoryRegion device;
+ MemoryRegion memory_device;
struct {
MemoryRegion caps;
union {
@@ -153,6 +158,9 @@ REG64(CXL_DEV_CAP_ARRAY, 0) /* Documented as 128 bit register but 64 byte access
CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE_STATUS, CXL_DEVICE_CAP_HDR1_OFFSET)
CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX, CXL_DEVICE_CAP_HDR1_OFFSET + \
CXL_DEVICE_CAP_REG_SIZE)
+CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MEMORY_DEVICE,
+ CXL_DEVICE_CAP_HDR1_OFFSET +
+ CXL_DEVICE_CAP_REG_SIZE * 2)
int cxl_initialize_mailbox(CXLDeviceState *cxl_dstate);
void cxl_process_mailbox(CXLDeviceState *cxl_dstate);
@@ -209,4 +217,11 @@ REG64(CXL_DEV_BG_CMD_STS, 0x18)
/* CXL 2.0 8.2.8.4.8 Command Payload Registers */
REG32(CXL_DEV_CMD_PAYLOAD, 0x20)
+REG64(CXL_MEM_DEV_STS, 0)
+ FIELD(CXL_MEM_DEV_STS, FATAL, 0, 1)
+ FIELD(CXL_MEM_DEV_STS, FW_HALT, 1, 1)
+ FIELD(CXL_MEM_DEV_STS, MEDIA_STATUS, 2, 2)
+ FIELD(CXL_MEM_DEV_STS, MBOX_READY, 4, 1)
+ FIELD(CXL_MEM_DEV_STS, RESET_NEEDED, 5, 3)
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 08/45] hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
Using the previously implemented stubbed helpers, it is now possible to
easily add the missing, required commands to the implementation.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-mailbox-utils.c | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 2557f41f61..fb1f53f48e 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -38,6 +38,14 @@
* a register interface that already deals with it.
*/
+enum {
+ EVENTS = 0x01,
+ #define GET_RECORDS 0x0
+ #define CLEAR_RECORDS 0x1
+ #define GET_INTERRUPT_POLICY 0x2
+ #define SET_INTERRUPT_POLICY 0x3
+};
+
/* 8.2.8.4.5.1 Command Return Codes */
typedef enum {
CXL_MBOX_SUCCESS = 0x0,
@@ -93,9 +101,26 @@ struct cxl_cmd {
return CXL_MBOX_SUCCESS; \
}
+DEFINE_MAILBOX_HANDLER_ZEROED(events_get_records, 0x20);
+DEFINE_MAILBOX_HANDLER_NOP(events_clear_records);
+DEFINE_MAILBOX_HANDLER_ZEROED(events_get_interrupt_policy, 4);
+DEFINE_MAILBOX_HANDLER_NOP(events_set_interrupt_policy);
+
static QemuUUID cel_uuid;
-static struct cxl_cmd cxl_cmd_set[256][256] = {};
+#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
+#define IMMEDIATE_LOG_CHANGE (1 << 4)
+
+static struct cxl_cmd cxl_cmd_set[256][256] = {
+ [EVENTS][GET_RECORDS] = { "EVENTS_GET_RECORDS",
+ cmd_events_get_records, 1, 0 },
+ [EVENTS][CLEAR_RECORDS] = { "EVENTS_CLEAR_RECORDS",
+ cmd_events_clear_records, ~0, IMMEDIATE_LOG_CHANGE },
+ [EVENTS][GET_INTERRUPT_POLICY] = { "EVENTS_GET_INTERRUPT_POLICY",
+ cmd_events_get_interrupt_policy, 0, 0 },
+ [EVENTS][SET_INTERRUPT_POLICY] = { "EVENTS_SET_INTERRUPT_POLICY",
+ cmd_events_set_interrupt_policy, 4, IMMEDIATE_CONFIG_CHANGE },
+};
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
{
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 08/45] hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
Using the previously implemented stubbed helpers, it is now possible to
easily add the missing, required commands to the implementation.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-mailbox-utils.c | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 2557f41f61..fb1f53f48e 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -38,6 +38,14 @@
* a register interface that already deals with it.
*/
+enum {
+ EVENTS = 0x01,
+ #define GET_RECORDS 0x0
+ #define CLEAR_RECORDS 0x1
+ #define GET_INTERRUPT_POLICY 0x2
+ #define SET_INTERRUPT_POLICY 0x3
+};
+
/* 8.2.8.4.5.1 Command Return Codes */
typedef enum {
CXL_MBOX_SUCCESS = 0x0,
@@ -93,9 +101,26 @@ struct cxl_cmd {
return CXL_MBOX_SUCCESS; \
}
+DEFINE_MAILBOX_HANDLER_ZEROED(events_get_records, 0x20);
+DEFINE_MAILBOX_HANDLER_NOP(events_clear_records);
+DEFINE_MAILBOX_HANDLER_ZEROED(events_get_interrupt_policy, 4);
+DEFINE_MAILBOX_HANDLER_NOP(events_set_interrupt_policy);
+
static QemuUUID cel_uuid;
-static struct cxl_cmd cxl_cmd_set[256][256] = {};
+#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
+#define IMMEDIATE_LOG_CHANGE (1 << 4)
+
+static struct cxl_cmd cxl_cmd_set[256][256] = {
+ [EVENTS][GET_RECORDS] = { "EVENTS_GET_RECORDS",
+ cmd_events_get_records, 1, 0 },
+ [EVENTS][CLEAR_RECORDS] = { "EVENTS_CLEAR_RECORDS",
+ cmd_events_clear_records, ~0, IMMEDIATE_LOG_CHANGE },
+ [EVENTS][GET_INTERRUPT_POLICY] = { "EVENTS_GET_INTERRUPT_POLICY",
+ cmd_events_get_interrupt_policy, 0, 0 },
+ [EVENTS][SET_INTERRUPT_POLICY] = { "EVENTS_SET_INTERRUPT_POLICY",
+ cmd_events_set_interrupt_policy, 4, IMMEDIATE_CONFIG_CHANGE },
+};
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
{
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 09/45] hw/cxl/device: Timestamp implementation (8.2.9.3)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
Errata F4 to CXL 2.0 clarified the meaning of the timer as the
sum of the value set with the timestamp set command and the number
of nano seconds since it was last set.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-mailbox-utils.c | 42 +++++++++++++++++++++++++++++++++++++
include/hw/cxl/cxl_device.h | 6 ++++++
2 files changed, 48 insertions(+)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index fb1f53f48e..4584aa31f7 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -44,6 +44,9 @@ enum {
#define CLEAR_RECORDS 0x1
#define GET_INTERRUPT_POLICY 0x2
#define SET_INTERRUPT_POLICY 0x3
+ TIMESTAMP = 0x03,
+ #define GET 0x0
+ #define SET 0x1
};
/* 8.2.8.4.5.1 Command Return Codes */
@@ -106,9 +109,46 @@ DEFINE_MAILBOX_HANDLER_NOP(events_clear_records);
DEFINE_MAILBOX_HANDLER_ZEROED(events_get_interrupt_policy, 4);
DEFINE_MAILBOX_HANDLER_NOP(events_set_interrupt_policy);
+/* 8.2.9.3.1 */
+static ret_code cmd_timestamp_get(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ uint64_t time, delta;
+ uint64_t final_time = 0;
+
+ if (cxl_dstate->timestamp.set) {
+ /* First find the delta from the last time the host set the time. */
+ time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ delta = time - cxl_dstate->timestamp.last_set;
+ final_time = cxl_dstate->timestamp.host_set + delta;
+ }
+
+ /* Then adjust the actual time */
+ stq_le_p(cmd->payload, final_time);
+ *len = 8;
+
+ return CXL_MBOX_SUCCESS;
+}
+
+/* 8.2.9.3.2 */
+static ret_code cmd_timestamp_set(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ cxl_dstate->timestamp.set = true;
+ cxl_dstate->timestamp.last_set = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+
+ cxl_dstate->timestamp.host_set = le64_to_cpu(*(uint64_t *)cmd->payload);
+
+ *len = 0;
+ return CXL_MBOX_SUCCESS;
+}
+
static QemuUUID cel_uuid;
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
+#define IMMEDIATE_POLICY_CHANGE (1 << 3)
#define IMMEDIATE_LOG_CHANGE (1 << 4)
static struct cxl_cmd cxl_cmd_set[256][256] = {
@@ -120,6 +160,8 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
cmd_events_get_interrupt_policy, 0, 0 },
[EVENTS][SET_INTERRUPT_POLICY] = { "EVENTS_SET_INTERRUPT_POLICY",
cmd_events_set_interrupt_policy, 4, IMMEDIATE_CONFIG_CHANGE },
+ [TIMESTAMP][GET] = { "TIMESTAMP_GET", cmd_timestamp_get, 0, 0 },
+ [TIMESTAMP][SET] = { "TIMESTAMP_SET", cmd_timestamp_set, 8, IMMEDIATE_POLICY_CHANGE },
};
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 954205653e..797a22ddb4 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -111,6 +111,12 @@ typedef struct cxl_device_state {
size_t cel_size;
};
+ struct {
+ bool set;
+ uint64_t last_set;
+ uint64_t host_set;
+ } timestamp;
+
/* memory region for persistent memory, HDM */
uint64_t pmem_size;
} CXLDeviceState;
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 09/45] hw/cxl/device: Timestamp implementation (8.2.9.3)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
Errata F4 to CXL 2.0 clarified the meaning of the timer as the
sum of the value set with the timestamp set command and the number
of nano seconds since it was last set.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-mailbox-utils.c | 42 +++++++++++++++++++++++++++++++++++++
include/hw/cxl/cxl_device.h | 6 ++++++
2 files changed, 48 insertions(+)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index fb1f53f48e..4584aa31f7 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -44,6 +44,9 @@ enum {
#define CLEAR_RECORDS 0x1
#define GET_INTERRUPT_POLICY 0x2
#define SET_INTERRUPT_POLICY 0x3
+ TIMESTAMP = 0x03,
+ #define GET 0x0
+ #define SET 0x1
};
/* 8.2.8.4.5.1 Command Return Codes */
@@ -106,9 +109,46 @@ DEFINE_MAILBOX_HANDLER_NOP(events_clear_records);
DEFINE_MAILBOX_HANDLER_ZEROED(events_get_interrupt_policy, 4);
DEFINE_MAILBOX_HANDLER_NOP(events_set_interrupt_policy);
+/* 8.2.9.3.1 */
+static ret_code cmd_timestamp_get(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ uint64_t time, delta;
+ uint64_t final_time = 0;
+
+ if (cxl_dstate->timestamp.set) {
+ /* First find the delta from the last time the host set the time. */
+ time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ delta = time - cxl_dstate->timestamp.last_set;
+ final_time = cxl_dstate->timestamp.host_set + delta;
+ }
+
+ /* Then adjust the actual time */
+ stq_le_p(cmd->payload, final_time);
+ *len = 8;
+
+ return CXL_MBOX_SUCCESS;
+}
+
+/* 8.2.9.3.2 */
+static ret_code cmd_timestamp_set(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ cxl_dstate->timestamp.set = true;
+ cxl_dstate->timestamp.last_set = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+
+ cxl_dstate->timestamp.host_set = le64_to_cpu(*(uint64_t *)cmd->payload);
+
+ *len = 0;
+ return CXL_MBOX_SUCCESS;
+}
+
static QemuUUID cel_uuid;
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
+#define IMMEDIATE_POLICY_CHANGE (1 << 3)
#define IMMEDIATE_LOG_CHANGE (1 << 4)
static struct cxl_cmd cxl_cmd_set[256][256] = {
@@ -120,6 +160,8 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
cmd_events_get_interrupt_policy, 0, 0 },
[EVENTS][SET_INTERRUPT_POLICY] = { "EVENTS_SET_INTERRUPT_POLICY",
cmd_events_set_interrupt_policy, 4, IMMEDIATE_CONFIG_CHANGE },
+ [TIMESTAMP][GET] = { "TIMESTAMP_GET", cmd_timestamp_get, 0, 0 },
+ [TIMESTAMP][SET] = { "TIMESTAMP_SET", cmd_timestamp_set, 8, IMMEDIATE_POLICY_CHANGE },
};
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 954205653e..797a22ddb4 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -111,6 +111,12 @@ typedef struct cxl_device_state {
size_t cel_size;
};
+ struct {
+ bool set;
+ uint64_t last_set;
+ uint64_t host_set;
+ } timestamp;
+
/* memory region for persistent memory, HDM */
uint64_t pmem_size;
} CXLDeviceState;
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 10/45] hw/cxl/device: Add log commands (8.2.9.4) + CEL
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
CXL specification provides for the ability to obtain logs from the
device. Logs are either spec defined, like the "Command Effects Log"
(CEL), or vendor specific. UUIDs are defined for all log types.
The CEL is a mechanism to provide information to the host about which
commands are supported. It is useful both to determine which spec'd
optional commands are supported, as well as provide a list of vendor
specified commands that might be used. The CEL is already created as
part of mailbox initialization, but here it is now exported to hosts
that use these log commands.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-mailbox-utils.c | 69 ++++++++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 4584aa31f7..db473135c7 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -47,6 +47,9 @@ enum {
TIMESTAMP = 0x03,
#define GET 0x0
#define SET 0x1
+ LOGS = 0x04,
+ #define GET_SUPPORTED 0x0
+ #define GET_LOG 0x1
};
/* 8.2.8.4.5.1 Command Return Codes */
@@ -147,6 +150,70 @@ static ret_code cmd_timestamp_set(struct cxl_cmd *cmd,
static QemuUUID cel_uuid;
+/* 8.2.9.4.1 */
+static ret_code cmd_logs_get_supported(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct {
+ uint16_t entries;
+ uint8_t rsvd[6];
+ struct {
+ QemuUUID uuid;
+ uint32_t size;
+ } log_entries[1];
+ } QEMU_PACKED *supported_logs = (void *)cmd->payload;
+ QEMU_BUILD_BUG_ON(sizeof(*supported_logs) != 0x1c);
+
+ supported_logs->entries = 1;
+ supported_logs->log_entries[0].uuid = cel_uuid;
+ supported_logs->log_entries[0].size = 4 * cxl_dstate->cel_size;
+
+ *len = sizeof(*supported_logs);
+ return CXL_MBOX_SUCCESS;
+}
+
+/* 8.2.9.4.2 */
+static ret_code cmd_logs_get_log(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct {
+ QemuUUID uuid;
+ uint32_t offset;
+ uint32_t length;
+ } QEMU_PACKED QEMU_ALIGNED(16) *get_log = (void *)cmd->payload;
+
+ /*
+ * 8.2.9.4.2
+ * The device shall return Invalid Parameter if the Offset or Length
+ * fields attempt to access beyond the size of the log as reported by Get
+ * Supported Logs.
+ *
+ * XXX: Spec is wrong, "Invalid Parameter" isn't a thing.
+ * XXX: Spec doesn't address incorrect UUID incorrectness.
+ *
+ * The CEL buffer is large enough to fit all commands in the emulation, so
+ * the only possible failure would be if the mailbox itself isn't big
+ * enough.
+ */
+ if (get_log->offset + get_log->length > cxl_dstate->payload_size) {
+ return CXL_MBOX_INVALID_INPUT;
+ }
+
+ if (!qemu_uuid_is_equal(&get_log->uuid, &cel_uuid)) {
+ return CXL_MBOX_UNSUPPORTED;
+ }
+
+ /* Store off everything to local variables so we can wipe out the payload */
+ *len = get_log->length;
+
+ memmove(cmd->payload, cxl_dstate->cel_log + get_log->offset,
+ get_log->length);
+
+ return CXL_MBOX_SUCCESS;
+}
+
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
#define IMMEDIATE_POLICY_CHANGE (1 << 3)
#define IMMEDIATE_LOG_CHANGE (1 << 4)
@@ -162,6 +229,8 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
cmd_events_set_interrupt_policy, 4, IMMEDIATE_CONFIG_CHANGE },
[TIMESTAMP][GET] = { "TIMESTAMP_GET", cmd_timestamp_get, 0, 0 },
[TIMESTAMP][SET] = { "TIMESTAMP_SET", cmd_timestamp_set, 8, IMMEDIATE_POLICY_CHANGE },
+ [LOGS][GET_SUPPORTED] = { "LOGS_GET_SUPPORTED", cmd_logs_get_supported, 0, 0 },
+ [LOGS][GET_LOG] = { "LOGS_GET_LOG", cmd_logs_get_log, 0x18, 0 },
};
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 10/45] hw/cxl/device: Add log commands (8.2.9.4) + CEL
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
CXL specification provides for the ability to obtain logs from the
device. Logs are either spec defined, like the "Command Effects Log"
(CEL), or vendor specific. UUIDs are defined for all log types.
The CEL is a mechanism to provide information to the host about which
commands are supported. It is useful both to determine which spec'd
optional commands are supported, as well as provide a list of vendor
specified commands that might be used. The CEL is already created as
part of mailbox initialization, but here it is now exported to hosts
that use these log commands.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-mailbox-utils.c | 69 ++++++++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 4584aa31f7..db473135c7 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -47,6 +47,9 @@ enum {
TIMESTAMP = 0x03,
#define GET 0x0
#define SET 0x1
+ LOGS = 0x04,
+ #define GET_SUPPORTED 0x0
+ #define GET_LOG 0x1
};
/* 8.2.8.4.5.1 Command Return Codes */
@@ -147,6 +150,70 @@ static ret_code cmd_timestamp_set(struct cxl_cmd *cmd,
static QemuUUID cel_uuid;
+/* 8.2.9.4.1 */
+static ret_code cmd_logs_get_supported(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct {
+ uint16_t entries;
+ uint8_t rsvd[6];
+ struct {
+ QemuUUID uuid;
+ uint32_t size;
+ } log_entries[1];
+ } QEMU_PACKED *supported_logs = (void *)cmd->payload;
+ QEMU_BUILD_BUG_ON(sizeof(*supported_logs) != 0x1c);
+
+ supported_logs->entries = 1;
+ supported_logs->log_entries[0].uuid = cel_uuid;
+ supported_logs->log_entries[0].size = 4 * cxl_dstate->cel_size;
+
+ *len = sizeof(*supported_logs);
+ return CXL_MBOX_SUCCESS;
+}
+
+/* 8.2.9.4.2 */
+static ret_code cmd_logs_get_log(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct {
+ QemuUUID uuid;
+ uint32_t offset;
+ uint32_t length;
+ } QEMU_PACKED QEMU_ALIGNED(16) *get_log = (void *)cmd->payload;
+
+ /*
+ * 8.2.9.4.2
+ * The device shall return Invalid Parameter if the Offset or Length
+ * fields attempt to access beyond the size of the log as reported by Get
+ * Supported Logs.
+ *
+ * XXX: Spec is wrong, "Invalid Parameter" isn't a thing.
+ * XXX: Spec doesn't address incorrect UUID incorrectness.
+ *
+ * The CEL buffer is large enough to fit all commands in the emulation, so
+ * the only possible failure would be if the mailbox itself isn't big
+ * enough.
+ */
+ if (get_log->offset + get_log->length > cxl_dstate->payload_size) {
+ return CXL_MBOX_INVALID_INPUT;
+ }
+
+ if (!qemu_uuid_is_equal(&get_log->uuid, &cel_uuid)) {
+ return CXL_MBOX_UNSUPPORTED;
+ }
+
+ /* Store off everything to local variables so we can wipe out the payload */
+ *len = get_log->length;
+
+ memmove(cmd->payload, cxl_dstate->cel_log + get_log->offset,
+ get_log->length);
+
+ return CXL_MBOX_SUCCESS;
+}
+
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
#define IMMEDIATE_POLICY_CHANGE (1 << 3)
#define IMMEDIATE_LOG_CHANGE (1 << 4)
@@ -162,6 +229,8 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
cmd_events_set_interrupt_policy, 4, IMMEDIATE_CONFIG_CHANGE },
[TIMESTAMP][GET] = { "TIMESTAMP_GET", cmd_timestamp_get, 0, 0 },
[TIMESTAMP][SET] = { "TIMESTAMP_SET", cmd_timestamp_set, 8, IMMEDIATE_POLICY_CHANGE },
+ [LOGS][GET_SUPPORTED] = { "LOGS_GET_SUPPORTED", cmd_logs_get_supported, 0, 0 },
+ [LOGS][GET_LOG] = { "LOGS_GET_LOG", cmd_logs_get_log, 0x18, 0 },
};
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 11/45] hw/pxb: Use a type for realizing expanders
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
This opens up the possibility for more types of expanders (other than
PCI and PCIe). We'll need this to create a CXL expander.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/pci-bridge/pci_expander_bridge.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index de932286b5..d4514227a8 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -24,6 +24,8 @@
#include "hw/boards.h"
#include "qom/object.h"
+enum BusType { PCI, PCIE };
+
#define TYPE_PXB_BUS "pxb-bus"
typedef struct PXBBus PXBBus;
DECLARE_INSTANCE_CHECKER(PXBBus, PXB_BUS,
@@ -221,7 +223,8 @@ static gint pxb_compare(gconstpointer a, gconstpointer b)
0;
}
-static void pxb_dev_realize_common(PCIDevice *dev, bool pcie, Error **errp)
+static void pxb_dev_realize_common(PCIDevice *dev, enum BusType type,
+ Error **errp)
{
PXBDev *pxb = convert_to_pxb(dev);
DeviceState *ds, *bds = NULL;
@@ -246,7 +249,7 @@ static void pxb_dev_realize_common(PCIDevice *dev, bool pcie, Error **errp)
}
ds = qdev_new(TYPE_PXB_HOST);
- if (pcie) {
+ if (type == PCIE) {
bus = pci_root_bus_new(ds, dev_name, NULL, NULL, 0, TYPE_PXB_PCIE_BUS);
} else {
bus = pci_root_bus_new(ds, "pxb-internal", NULL, NULL, 0, TYPE_PXB_BUS);
@@ -295,7 +298,7 @@ static void pxb_dev_realize(PCIDevice *dev, Error **errp)
return;
}
- pxb_dev_realize_common(dev, false, errp);
+ pxb_dev_realize_common(dev, PCI, errp);
}
static void pxb_dev_exitfn(PCIDevice *pci_dev)
@@ -348,7 +351,7 @@ static void pxb_pcie_dev_realize(PCIDevice *dev, Error **errp)
return;
}
- pxb_dev_realize_common(dev, true, errp);
+ pxb_dev_realize_common(dev, PCIE, errp);
}
static void pxb_pcie_dev_class_init(ObjectClass *klass, void *data)
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 11/45] hw/pxb: Use a type for realizing expanders
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
This opens up the possibility for more types of expanders (other than
PCI and PCIe). We'll need this to create a CXL expander.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/pci-bridge/pci_expander_bridge.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index de932286b5..d4514227a8 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -24,6 +24,8 @@
#include "hw/boards.h"
#include "qom/object.h"
+enum BusType { PCI, PCIE };
+
#define TYPE_PXB_BUS "pxb-bus"
typedef struct PXBBus PXBBus;
DECLARE_INSTANCE_CHECKER(PXBBus, PXB_BUS,
@@ -221,7 +223,8 @@ static gint pxb_compare(gconstpointer a, gconstpointer b)
0;
}
-static void pxb_dev_realize_common(PCIDevice *dev, bool pcie, Error **errp)
+static void pxb_dev_realize_common(PCIDevice *dev, enum BusType type,
+ Error **errp)
{
PXBDev *pxb = convert_to_pxb(dev);
DeviceState *ds, *bds = NULL;
@@ -246,7 +249,7 @@ static void pxb_dev_realize_common(PCIDevice *dev, bool pcie, Error **errp)
}
ds = qdev_new(TYPE_PXB_HOST);
- if (pcie) {
+ if (type == PCIE) {
bus = pci_root_bus_new(ds, dev_name, NULL, NULL, 0, TYPE_PXB_PCIE_BUS);
} else {
bus = pci_root_bus_new(ds, "pxb-internal", NULL, NULL, 0, TYPE_PXB_BUS);
@@ -295,7 +298,7 @@ static void pxb_dev_realize(PCIDevice *dev, Error **errp)
return;
}
- pxb_dev_realize_common(dev, false, errp);
+ pxb_dev_realize_common(dev, PCI, errp);
}
static void pxb_dev_exitfn(PCIDevice *pci_dev)
@@ -348,7 +351,7 @@ static void pxb_pcie_dev_realize(PCIDevice *dev, Error **errp)
return;
}
- pxb_dev_realize_common(dev, true, errp);
+ pxb_dev_realize_common(dev, PCIE, errp);
}
static void pxb_pcie_dev_class_init(ObjectClass *klass, void *data)
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 12/45] hw/pci/cxl: Create a CXL bus type
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
The easiest way to differentiate a CXL bus, and a PCIE bus is using a
flag. A CXL bus, in hardware, is backward compatible with PCIE, and
therefore the code tries pretty hard to keep them in sync as much as
possible.
The other way to implement this would be to try to cast the bus to the
correct type. This is less code and useful for debugging via simply
looking at the flags.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/pci-bridge/pci_expander_bridge.c | 9 ++++++++-
include/hw/pci/pci_bus.h | 7 +++++++
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index d4514227a8..a6caa1e7b5 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -24,7 +24,7 @@
#include "hw/boards.h"
#include "qom/object.h"
-enum BusType { PCI, PCIE };
+enum BusType { PCI, PCIE, CXL };
#define TYPE_PXB_BUS "pxb-bus"
typedef struct PXBBus PXBBus;
@@ -35,6 +35,10 @@ DECLARE_INSTANCE_CHECKER(PXBBus, PXB_BUS,
DECLARE_INSTANCE_CHECKER(PXBBus, PXB_PCIE_BUS,
TYPE_PXB_PCIE_BUS)
+#define TYPE_PXB_CXL_BUS "pxb-cxl-bus"
+DECLARE_INSTANCE_CHECKER(PXBBus, PXB_CXL_BUS,
+ TYPE_PXB_CXL_BUS)
+
struct PXBBus {
/*< private >*/
PCIBus parent_obj;
@@ -251,6 +255,9 @@ static void pxb_dev_realize_common(PCIDevice *dev, enum BusType type,
ds = qdev_new(TYPE_PXB_HOST);
if (type == PCIE) {
bus = pci_root_bus_new(ds, dev_name, NULL, NULL, 0, TYPE_PXB_PCIE_BUS);
+ } else if (type == CXL) {
+ bus = pci_root_bus_new(ds, dev_name, NULL, NULL, 0, TYPE_PXB_CXL_BUS);
+ bus->flags |= PCI_BUS_CXL;
} else {
bus = pci_root_bus_new(ds, "pxb-internal", NULL, NULL, 0, TYPE_PXB_BUS);
bds = qdev_new("pci-bridge");
diff --git a/include/hw/pci/pci_bus.h b/include/hw/pci/pci_bus.h
index 347440d42c..eb94e7e85c 100644
--- a/include/hw/pci/pci_bus.h
+++ b/include/hw/pci/pci_bus.h
@@ -24,6 +24,8 @@ enum PCIBusFlags {
PCI_BUS_IS_ROOT = 0x0001,
/* PCIe extended configuration space is accessible on this bus */
PCI_BUS_EXTENDED_CONFIG_SPACE = 0x0002,
+ /* This is a CXL Type BUS */
+ PCI_BUS_CXL = 0x0004,
};
struct PCIBus {
@@ -53,6 +55,11 @@ struct PCIBus {
Notifier machine_done;
};
+static inline bool pci_bus_is_cxl(PCIBus *bus)
+{
+ return !!(bus->flags & PCI_BUS_CXL);
+}
+
static inline bool pci_bus_is_root(PCIBus *bus)
{
return !!(bus->flags & PCI_BUS_IS_ROOT);
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 12/45] hw/pci/cxl: Create a CXL bus type
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
The easiest way to differentiate a CXL bus, and a PCIE bus is using a
flag. A CXL bus, in hardware, is backward compatible with PCIE, and
therefore the code tries pretty hard to keep them in sync as much as
possible.
The other way to implement this would be to try to cast the bus to the
correct type. This is less code and useful for debugging via simply
looking at the flags.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/pci-bridge/pci_expander_bridge.c | 9 ++++++++-
include/hw/pci/pci_bus.h | 7 +++++++
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index d4514227a8..a6caa1e7b5 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -24,7 +24,7 @@
#include "hw/boards.h"
#include "qom/object.h"
-enum BusType { PCI, PCIE };
+enum BusType { PCI, PCIE, CXL };
#define TYPE_PXB_BUS "pxb-bus"
typedef struct PXBBus PXBBus;
@@ -35,6 +35,10 @@ DECLARE_INSTANCE_CHECKER(PXBBus, PXB_BUS,
DECLARE_INSTANCE_CHECKER(PXBBus, PXB_PCIE_BUS,
TYPE_PXB_PCIE_BUS)
+#define TYPE_PXB_CXL_BUS "pxb-cxl-bus"
+DECLARE_INSTANCE_CHECKER(PXBBus, PXB_CXL_BUS,
+ TYPE_PXB_CXL_BUS)
+
struct PXBBus {
/*< private >*/
PCIBus parent_obj;
@@ -251,6 +255,9 @@ static void pxb_dev_realize_common(PCIDevice *dev, enum BusType type,
ds = qdev_new(TYPE_PXB_HOST);
if (type == PCIE) {
bus = pci_root_bus_new(ds, dev_name, NULL, NULL, 0, TYPE_PXB_PCIE_BUS);
+ } else if (type == CXL) {
+ bus = pci_root_bus_new(ds, dev_name, NULL, NULL, 0, TYPE_PXB_CXL_BUS);
+ bus->flags |= PCI_BUS_CXL;
} else {
bus = pci_root_bus_new(ds, "pxb-internal", NULL, NULL, 0, TYPE_PXB_BUS);
bds = qdev_new("pci-bridge");
diff --git a/include/hw/pci/pci_bus.h b/include/hw/pci/pci_bus.h
index 347440d42c..eb94e7e85c 100644
--- a/include/hw/pci/pci_bus.h
+++ b/include/hw/pci/pci_bus.h
@@ -24,6 +24,8 @@ enum PCIBusFlags {
PCI_BUS_IS_ROOT = 0x0001,
/* PCIe extended configuration space is accessible on this bus */
PCI_BUS_EXTENDED_CONFIG_SPACE = 0x0002,
+ /* This is a CXL Type BUS */
+ PCI_BUS_CXL = 0x0004,
};
struct PCIBus {
@@ -53,6 +55,11 @@ struct PCIBus {
Notifier machine_done;
};
+static inline bool pci_bus_is_cxl(PCIBus *bus)
+{
+ return !!(bus->flags & PCI_BUS_CXL);
+}
+
static inline bool pci_bus_is_root(PCIBus *bus)
{
return !!(bus->flags & PCI_BUS_IS_ROOT);
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 13/45] cxl: Machine level control on whether CXL support is enabled
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
There are going to be some potential overheads to CXL enablement,
for example the host bridge region reserved in memory maps.
Add a machine level control so that CXL is disabled by default.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/core/machine.c | 28 ++++++++++++++++++++++++++++
hw/i386/pc.c | 1 +
include/hw/boards.h | 2 ++
include/hw/cxl/cxl.h | 4 ++++
4 files changed, 35 insertions(+)
diff --git a/hw/core/machine.c b/hw/core/machine.c
index cb9bbc844d..6ae2997f16 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -31,6 +31,7 @@
#include "sysemu/qtest.h"
#include "hw/pci/pci.h"
#include "hw/mem/nvdimm.h"
+#include "hw/cxl/cxl.h"
#include "migration/global_state.h"
#include "migration/vmstate.h"
#include "exec/confidential-guest-support.h"
@@ -550,6 +551,20 @@ static void machine_set_nvdimm_persistence(Object *obj, const char *value,
nvdimms_state->persistence_string = g_strdup(value);
}
+static bool machine_get_cxl(Object *obj, Error **errp)
+{
+ MachineState *ms = MACHINE(obj);
+
+ return ms->cxl_devices_state->is_enabled;
+}
+
+static void machine_set_cxl(Object *obj, bool value, Error **errp)
+{
+ MachineState *ms = MACHINE(obj);
+
+ ms->cxl_devices_state->is_enabled = value;
+}
+
void machine_class_allow_dynamic_sysbus_dev(MachineClass *mc, const char *type)
{
QAPI_LIST_PREPEND(mc->allowed_dynamic_sysbus_devices, g_strdup(type));
@@ -782,6 +797,8 @@ static void machine_class_init(ObjectClass *oc, void *data)
mc->default_ram_size = 128 * MiB;
mc->rom_file_has_mr = true;
+ /* Few machines support CXL, so default to off */
+ mc->cxl_supported = false;
/* numa node memory size aligned on 8MB by default.
* On Linux, each node's border has to be 8MB aligned
*/
@@ -927,6 +944,16 @@ static void machine_initfn(Object *obj)
"Valid values are cpu, mem-ctrl");
}
+ if (mc->cxl_supported) {
+ Object *obj = OBJECT(ms);
+
+ ms->cxl_devices_state = g_new0(CXLState, 1);
+ object_property_add_bool(obj, "cxl", machine_get_cxl, machine_set_cxl);
+ object_property_set_description(obj, "cxl",
+ "Set on/off to enable/disable "
+ "CXL instantiation");
+ }
+
if (mc->cpu_index_to_instance_props && mc->get_default_cpu_node_id) {
ms->numa_state = g_new0(NumaState, 1);
object_property_add_bool(obj, "hmat",
@@ -961,6 +988,7 @@ static void machine_finalize(Object *obj)
g_free(ms->device_memory);
g_free(ms->nvdimms_state);
g_free(ms->numa_state);
+ g_free(ms->cxl_devices_state);
}
bool machine_usb(MachineState *machine)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 23bba9d82c..b752339beb 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1761,6 +1761,7 @@ static void pc_machine_class_init(ObjectClass *oc, void *data)
mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE;
mc->nvdimm_supported = true;
mc->smp_props.dies_supported = true;
+ mc->cxl_supported = true;
mc->default_ram_id = "pc.ram";
object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size",
diff --git a/include/hw/boards.h b/include/hw/boards.h
index d64b5481e8..f756a1d5fc 100644
--- a/include/hw/boards.h
+++ b/include/hw/boards.h
@@ -269,6 +269,7 @@ struct MachineClass {
bool ignore_boot_device_suffixes;
bool smbus_no_migration_support;
bool nvdimm_supported;
+ bool cxl_supported;
bool numa_mem_supported;
bool auto_enable_numa;
SMPCompatProps smp_props;
@@ -360,6 +361,7 @@ struct MachineState {
CPUArchIdList *possible_cpus;
CpuTopology smp;
struct NVDIMMState *nvdimms_state;
+ struct CXLState *cxl_devices_state;
struct NumaState *numa_state;
};
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 554ad93b6b..31af92fd5e 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -17,4 +17,8 @@
#define CXL_COMPONENT_REG_BAR_IDX 0
#define CXL_DEVICE_REG_BAR_IDX 2
+typedef struct CXLState {
+ bool is_enabled;
+} CXLState;
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 13/45] cxl: Machine level control on whether CXL support is enabled
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
There are going to be some potential overheads to CXL enablement,
for example the host bridge region reserved in memory maps.
Add a machine level control so that CXL is disabled by default.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/core/machine.c | 28 ++++++++++++++++++++++++++++
hw/i386/pc.c | 1 +
include/hw/boards.h | 2 ++
include/hw/cxl/cxl.h | 4 ++++
4 files changed, 35 insertions(+)
diff --git a/hw/core/machine.c b/hw/core/machine.c
index cb9bbc844d..6ae2997f16 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -31,6 +31,7 @@
#include "sysemu/qtest.h"
#include "hw/pci/pci.h"
#include "hw/mem/nvdimm.h"
+#include "hw/cxl/cxl.h"
#include "migration/global_state.h"
#include "migration/vmstate.h"
#include "exec/confidential-guest-support.h"
@@ -550,6 +551,20 @@ static void machine_set_nvdimm_persistence(Object *obj, const char *value,
nvdimms_state->persistence_string = g_strdup(value);
}
+static bool machine_get_cxl(Object *obj, Error **errp)
+{
+ MachineState *ms = MACHINE(obj);
+
+ return ms->cxl_devices_state->is_enabled;
+}
+
+static void machine_set_cxl(Object *obj, bool value, Error **errp)
+{
+ MachineState *ms = MACHINE(obj);
+
+ ms->cxl_devices_state->is_enabled = value;
+}
+
void machine_class_allow_dynamic_sysbus_dev(MachineClass *mc, const char *type)
{
QAPI_LIST_PREPEND(mc->allowed_dynamic_sysbus_devices, g_strdup(type));
@@ -782,6 +797,8 @@ static void machine_class_init(ObjectClass *oc, void *data)
mc->default_ram_size = 128 * MiB;
mc->rom_file_has_mr = true;
+ /* Few machines support CXL, so default to off */
+ mc->cxl_supported = false;
/* numa node memory size aligned on 8MB by default.
* On Linux, each node's border has to be 8MB aligned
*/
@@ -927,6 +944,16 @@ static void machine_initfn(Object *obj)
"Valid values are cpu, mem-ctrl");
}
+ if (mc->cxl_supported) {
+ Object *obj = OBJECT(ms);
+
+ ms->cxl_devices_state = g_new0(CXLState, 1);
+ object_property_add_bool(obj, "cxl", machine_get_cxl, machine_set_cxl);
+ object_property_set_description(obj, "cxl",
+ "Set on/off to enable/disable "
+ "CXL instantiation");
+ }
+
if (mc->cpu_index_to_instance_props && mc->get_default_cpu_node_id) {
ms->numa_state = g_new0(NumaState, 1);
object_property_add_bool(obj, "hmat",
@@ -961,6 +988,7 @@ static void machine_finalize(Object *obj)
g_free(ms->device_memory);
g_free(ms->nvdimms_state);
g_free(ms->numa_state);
+ g_free(ms->cxl_devices_state);
}
bool machine_usb(MachineState *machine)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 23bba9d82c..b752339beb 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1761,6 +1761,7 @@ static void pc_machine_class_init(ObjectClass *oc, void *data)
mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE;
mc->nvdimm_supported = true;
mc->smp_props.dies_supported = true;
+ mc->cxl_supported = true;
mc->default_ram_id = "pc.ram";
object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size",
diff --git a/include/hw/boards.h b/include/hw/boards.h
index d64b5481e8..f756a1d5fc 100644
--- a/include/hw/boards.h
+++ b/include/hw/boards.h
@@ -269,6 +269,7 @@ struct MachineClass {
bool ignore_boot_device_suffixes;
bool smbus_no_migration_support;
bool nvdimm_supported;
+ bool cxl_supported;
bool numa_mem_supported;
bool auto_enable_numa;
SMPCompatProps smp_props;
@@ -360,6 +361,7 @@ struct MachineState {
CPUArchIdList *possible_cpus;
CpuTopology smp;
struct NVDIMMState *nvdimms_state;
+ struct CXLState *cxl_devices_state;
struct NumaState *numa_state;
};
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 554ad93b6b..31af92fd5e 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -17,4 +17,8 @@
#define CXL_COMPONENT_REG_BAR_IDX 0
#define CXL_DEVICE_REG_BAR_IDX 2
+typedef struct CXLState {
+ bool is_enabled;
+} CXLState;
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* Re: [PATCH v10 13/45] cxl: Machine level control on whether CXL support is enabled
2022-04-29 14:40 ` Jonathan Cameron via
(?)
@ 2022-05-21 9:11 ` Paolo Bonzini
-1 siblings, 0 replies; 100+ messages in thread
From: Paolo Bonzini @ 2022-05-21 9:11 UTC (permalink / raw)
To: Jonathan Cameron, linuxarm, qemu-devel, alex.bennee,
Marcel Apfelbaum, Michael S . Tsirkin, Igor Mammedov,
Markus Armbruster, Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Saransh Gupta1, Shreyas Shah, Chris Browy, Samarth Saxena,
Dan Williams, k.jensen, dave, Alison Schofield
On 4/29/22 16:40, Jonathan Cameron via wrote:
> From: Jonathan Cameron <jonathan.cameron@huawei.com>
>
> There are going to be some potential overheads to CXL enablement,
> for example the host bridge region reserved in memory maps.
> Add a machine level control so that CXL is disabled by default.
>
> Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> hw/core/machine.c | 28 ++++++++++++++++++++++++++++
> hw/i386/pc.c | 1 +
> include/hw/boards.h | 2 ++
> include/hw/cxl/cxl.h | 4 ++++
> 4 files changed, 35 insertions(+)
Another belated review, I think this shouldn't be added to machines that
do not support CXL (yes, there are options like -M usb but they are from
olden times---and CXL is a little more niche, too :)).
Can you move the CXL code for machines to e.g. hw/cxl/machine.c and have
the various machines call back into hooks to add the properties, resolve
the memory window targets etc.?. A CXLState* like cxl_devices_state can
be added to the machines and passed as CXLState** to one of these hooks.
Thanks,
Paolo
> diff --git a/hw/core/machine.c b/hw/core/machine.c
> index cb9bbc844d..6ae2997f16 100644
> --- a/hw/core/machine.c
> +++ b/hw/core/machine.c
> @@ -31,6 +31,7 @@
> #include "sysemu/qtest.h"
> #include "hw/pci/pci.h"
> #include "hw/mem/nvdimm.h"
> +#include "hw/cxl/cxl.h"
> #include "migration/global_state.h"
> #include "migration/vmstate.h"
> #include "exec/confidential-guest-support.h"
> @@ -550,6 +551,20 @@ static void machine_set_nvdimm_persistence(Object *obj, const char *value,
> nvdimms_state->persistence_string = g_strdup(value);
> }
>
> +static bool machine_get_cxl(Object *obj, Error **errp)
> +{
> + MachineState *ms = MACHINE(obj);
> +
> + return ms->cxl_devices_state->is_enabled;
> +}
> +
> +static void machine_set_cxl(Object *obj, bool value, Error **errp)
> +{
> + MachineState *ms = MACHINE(obj);
> +
> + ms->cxl_devices_state->is_enabled = value;
> +}
> +
> void machine_class_allow_dynamic_sysbus_dev(MachineClass *mc, const char *type)
> {
> QAPI_LIST_PREPEND(mc->allowed_dynamic_sysbus_devices, g_strdup(type));
> @@ -782,6 +797,8 @@ static void machine_class_init(ObjectClass *oc, void *data)
> mc->default_ram_size = 128 * MiB;
> mc->rom_file_has_mr = true;
>
> + /* Few machines support CXL, so default to off */
> + mc->cxl_supported = false;
> /* numa node memory size aligned on 8MB by default.
> * On Linux, each node's border has to be 8MB aligned
> */
> @@ -927,6 +944,16 @@ static void machine_initfn(Object *obj)
> "Valid values are cpu, mem-ctrl");
> }
>
> + if (mc->cxl_supported) {
> + Object *obj = OBJECT(ms);
> +
> + ms->cxl_devices_state = g_new0(CXLState, 1);
> + object_property_add_bool(obj, "cxl", machine_get_cxl, machine_set_cxl);
> + object_property_set_description(obj, "cxl",
> + "Set on/off to enable/disable "
> + "CXL instantiation");
> + }
> +
> if (mc->cpu_index_to_instance_props && mc->get_default_cpu_node_id) {
> ms->numa_state = g_new0(NumaState, 1);
> object_property_add_bool(obj, "hmat",
> @@ -961,6 +988,7 @@ static void machine_finalize(Object *obj)
> g_free(ms->device_memory);
> g_free(ms->nvdimms_state);
> g_free(ms->numa_state);
> + g_free(ms->cxl_devices_state);
> }
>
> bool machine_usb(MachineState *machine)
> diff --git a/hw/i386/pc.c b/hw/i386/pc.c
> index 23bba9d82c..b752339beb 100644
> --- a/hw/i386/pc.c
> +++ b/hw/i386/pc.c
> @@ -1761,6 +1761,7 @@ static void pc_machine_class_init(ObjectClass *oc, void *data)
> mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE;
> mc->nvdimm_supported = true;
> mc->smp_props.dies_supported = true;
> + mc->cxl_supported = true;
> mc->default_ram_id = "pc.ram";
>
> object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size",
> diff --git a/include/hw/boards.h b/include/hw/boards.h
> index d64b5481e8..f756a1d5fc 100644
> --- a/include/hw/boards.h
> +++ b/include/hw/boards.h
> @@ -269,6 +269,7 @@ struct MachineClass {
> bool ignore_boot_device_suffixes;
> bool smbus_no_migration_support;
> bool nvdimm_supported;
> + bool cxl_supported;
> bool numa_mem_supported;
> bool auto_enable_numa;
> SMPCompatProps smp_props;
> @@ -360,6 +361,7 @@ struct MachineState {
> CPUArchIdList *possible_cpus;
> CpuTopology smp;
> struct NVDIMMState *nvdimms_state;
> + struct CXLState *cxl_devices_state;
> struct NumaState *numa_state;
> };
>
> diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
> index 554ad93b6b..31af92fd5e 100644
> --- a/include/hw/cxl/cxl.h
> +++ b/include/hw/cxl/cxl.h
> @@ -17,4 +17,8 @@
> #define CXL_COMPONENT_REG_BAR_IDX 0
> #define CXL_DEVICE_REG_BAR_IDX 2
>
> +typedef struct CXLState {
> + bool is_enabled;
> +} CXLState;
> +
> #endif
^ permalink raw reply [flat|nested] 100+ messages in thread
* [PATCH v10 14/45] hw/pxb: Allow creation of a CXL PXB (host bridge)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
This works like adding a typical pxb device, except the name is
'pxb-cxl' instead of 'pxb-pcie'. An example command line would be as
follows:
-device pxb-cxl,id=cxl.0,bus="pcie.0",bus_nr=1
A CXL PXB is backward compatible with PCIe. What this means in practice
is that an operating system that is unaware of CXL should still be able
to enumerate this topology as if it were PCIe.
One can create multiple CXL PXB host bridges, but a host bridge can only
be connected to the main root bus. Host bridges cannot appear elsewhere
in the topology.
Note that as of this patch, the ACPI tables needed for the host bridge
(specifically, an ACPI object in _SB named ACPI0016 and the CEDT) aren't
created. So while this patch internally creates it, it cannot be
properly used by an operating system or other system software.
Also necessary is to add an exception to scripts/device-crash-test
similar to that for exiting pxb as both must created on a PCIexpress
host bus.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan.Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/pci-bridge/pci_expander_bridge.c | 86 ++++++++++++++++++++++++++++-
hw/pci/pci.c | 7 +++
include/hw/pci/pci.h | 6 ++
scripts/device-crash-test | 1 +
4 files changed, 98 insertions(+), 2 deletions(-)
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index a6caa1e7b5..f762eb4a6e 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -17,6 +17,7 @@
#include "hw/pci/pci_host.h"
#include "hw/qdev-properties.h"
#include "hw/pci/pci_bridge.h"
+#include "hw/cxl/cxl.h"
#include "qemu/range.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
@@ -56,6 +57,16 @@ DECLARE_INSTANCE_CHECKER(PXBDev, PXB_DEV,
DECLARE_INSTANCE_CHECKER(PXBDev, PXB_PCIE_DEV,
TYPE_PXB_PCIE_DEVICE)
+#define TYPE_PXB_CXL_DEVICE "pxb-cxl"
+DECLARE_INSTANCE_CHECKER(PXBDev, PXB_CXL_DEV,
+ TYPE_PXB_CXL_DEVICE)
+
+typedef struct CXLHost {
+ PCIHostState parent_obj;
+
+ CXLComponentState cxl_cstate;
+} CXLHost;
+
struct PXBDev {
/*< private >*/
PCIDevice parent_obj;
@@ -68,6 +79,11 @@ struct PXBDev {
static PXBDev *convert_to_pxb(PCIDevice *dev)
{
+ /* A CXL PXB's parent bus is PCIe, so the normal check won't work */
+ if (object_dynamic_cast(OBJECT(dev), TYPE_PXB_CXL_DEVICE)) {
+ return PXB_CXL_DEV(dev);
+ }
+
return pci_bus_is_express(pci_get_bus(dev))
? PXB_PCIE_DEV(dev) : PXB_DEV(dev);
}
@@ -112,11 +128,20 @@ static const TypeInfo pxb_pcie_bus_info = {
.class_init = pxb_bus_class_init,
};
+static const TypeInfo pxb_cxl_bus_info = {
+ .name = TYPE_PXB_CXL_BUS,
+ .parent = TYPE_CXL_BUS,
+ .instance_size = sizeof(PXBBus),
+ .class_init = pxb_bus_class_init,
+};
+
static const char *pxb_host_root_bus_path(PCIHostState *host_bridge,
PCIBus *rootbus)
{
- PXBBus *bus = pci_bus_is_express(rootbus) ?
- PXB_PCIE_BUS(rootbus) : PXB_BUS(rootbus);
+ PXBBus *bus = pci_bus_is_cxl(rootbus) ?
+ PXB_CXL_BUS(rootbus) :
+ pci_bus_is_express(rootbus) ? PXB_PCIE_BUS(rootbus) :
+ PXB_BUS(rootbus);
snprintf(bus->bus_path, 8, "0000:%02x", pxb_bus_num(rootbus));
return bus->bus_path;
@@ -218,6 +243,10 @@ static int pxb_map_irq_fn(PCIDevice *pci_dev, int pin)
return pin - PCI_SLOT(pxb->devfn);
}
+static void pxb_dev_reset(DeviceState *dev)
+{
+}
+
static gint pxb_compare(gconstpointer a, gconstpointer b)
{
const PXBDev *pxb_a = a, *pxb_b = b;
@@ -389,13 +418,66 @@ static const TypeInfo pxb_pcie_dev_info = {
},
};
+static void pxb_cxl_dev_realize(PCIDevice *dev, Error **errp)
+{
+ MachineState *ms = MACHINE(qdev_get_machine());
+
+ /* A CXL PXB's parent bus is still PCIe */
+ if (!pci_bus_is_express(pci_get_bus(dev))) {
+ error_setg(errp, "pxb-cxl devices cannot reside on a PCI bus");
+ return;
+ }
+ if (!ms->cxl_devices_state->is_enabled) {
+ error_setg(errp, "Machine does not have cxl=on");
+ return;
+ }
+
+ pxb_dev_realize_common(dev, CXL, errp);
+ pxb_dev_reset(DEVICE(dev));
+}
+
+static void pxb_cxl_dev_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->realize = pxb_cxl_dev_realize;
+ k->exit = pxb_dev_exitfn;
+ /*
+ * XXX: These types of bridges don't actually show up in the hierarchy so
+ * vendor, device, class, etc. ids are intentionally left out.
+ */
+
+ dc->desc = "CXL Host Bridge";
+ device_class_set_props(dc, pxb_dev_properties);
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+
+ /* Host bridges aren't hotpluggable. FIXME: spec reference */
+ dc->hotpluggable = false;
+ dc->reset = pxb_dev_reset;
+}
+
+static const TypeInfo pxb_cxl_dev_info = {
+ .name = TYPE_PXB_CXL_DEVICE,
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(PXBDev),
+ .class_init = pxb_cxl_dev_class_init,
+ .interfaces =
+ (InterfaceInfo[]){
+ { INTERFACE_CONVENTIONAL_PCI_DEVICE },
+ {},
+ },
+};
+
static void pxb_register_types(void)
{
type_register_static(&pxb_bus_info);
type_register_static(&pxb_pcie_bus_info);
+ type_register_static(&pxb_cxl_bus_info);
type_register_static(&pxb_host_info);
type_register_static(&pxb_dev_info);
type_register_static(&pxb_pcie_dev_info);
+ type_register_static(&pxb_cxl_dev_info);
}
type_init(pxb_register_types)
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 08bd2db2ad..41ec9ed43d 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -228,6 +228,12 @@ static const TypeInfo pcie_bus_info = {
.class_init = pcie_bus_class_init,
};
+static const TypeInfo cxl_bus_info = {
+ .name = TYPE_CXL_BUS,
+ .parent = TYPE_PCIE_BUS,
+ .class_init = pcie_bus_class_init,
+};
+
static PCIBus *pci_find_bus_nr(PCIBus *bus, int bus_num);
static void pci_update_mappings(PCIDevice *d);
static void pci_irq_handler(void *opaque, int irq_num, int level);
@@ -2945,6 +2951,7 @@ static void pci_register_types(void)
{
type_register_static(&pci_bus_info);
type_register_static(&pcie_bus_info);
+ type_register_static(&cxl_bus_info);
type_register_static(&conventional_pci_interface_info);
type_register_static(&cxl_interface_info);
type_register_static(&pcie_interface_info);
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index 98f0d1b844..44dacfa224 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -408,6 +408,7 @@ typedef PCIINTxRoute (*pci_route_irq_fn)(void *opaque, int pin);
#define TYPE_PCI_BUS "PCI"
OBJECT_DECLARE_TYPE(PCIBus, PCIBusClass, PCI_BUS)
#define TYPE_PCIE_BUS "PCIE"
+#define TYPE_CXL_BUS "CXL"
typedef void (*pci_bus_dev_fn)(PCIBus *b, PCIDevice *d, void *opaque);
typedef void (*pci_bus_fn)(PCIBus *b, void *opaque);
@@ -770,6 +771,11 @@ static inline void pci_irq_pulse(PCIDevice *pci_dev)
pci_irq_deassert(pci_dev);
}
+static inline int pci_is_cxl(const PCIDevice *d)
+{
+ return d->cap_present & QEMU_PCIE_CAP_CXL;
+}
+
static inline int pci_is_express(const PCIDevice *d)
{
return d->cap_present & QEMU_PCI_CAP_EXPRESS;
diff --git a/scripts/device-crash-test b/scripts/device-crash-test
index 4bfc68c008..a203b3fdea 100755
--- a/scripts/device-crash-test
+++ b/scripts/device-crash-test
@@ -93,6 +93,7 @@ ERROR_RULE_LIST = [
{'device':'pci-bridge', 'expected':True}, # Bridge chassis not specified. Each bridge is required to be assigned a unique chassis id > 0.
{'device':'pci-bridge-seat', 'expected':True}, # Bridge chassis not specified. Each bridge is required to be assigned a unique chassis id > 0.
{'device':'pxb', 'expected':True}, # Bridge chassis not specified. Each bridge is required to be assigned a unique chassis id > 0.
+ {'device':'pxb-cxl', 'expected':True}, # pxb-cxl devices cannot reside on a PCI bus.
{'device':'scsi-block', 'expected':True}, # drive property not set
{'device':'scsi-generic', 'expected':True}, # drive property not set
{'device':'scsi-hd', 'expected':True}, # drive property not set
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 14/45] hw/pxb: Allow creation of a CXL PXB (host bridge)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
This works like adding a typical pxb device, except the name is
'pxb-cxl' instead of 'pxb-pcie'. An example command line would be as
follows:
-device pxb-cxl,id=cxl.0,bus="pcie.0",bus_nr=1
A CXL PXB is backward compatible with PCIe. What this means in practice
is that an operating system that is unaware of CXL should still be able
to enumerate this topology as if it were PCIe.
One can create multiple CXL PXB host bridges, but a host bridge can only
be connected to the main root bus. Host bridges cannot appear elsewhere
in the topology.
Note that as of this patch, the ACPI tables needed for the host bridge
(specifically, an ACPI object in _SB named ACPI0016 and the CEDT) aren't
created. So while this patch internally creates it, it cannot be
properly used by an operating system or other system software.
Also necessary is to add an exception to scripts/device-crash-test
similar to that for exiting pxb as both must created on a PCIexpress
host bus.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan.Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/pci-bridge/pci_expander_bridge.c | 86 ++++++++++++++++++++++++++++-
hw/pci/pci.c | 7 +++
include/hw/pci/pci.h | 6 ++
scripts/device-crash-test | 1 +
4 files changed, 98 insertions(+), 2 deletions(-)
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index a6caa1e7b5..f762eb4a6e 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -17,6 +17,7 @@
#include "hw/pci/pci_host.h"
#include "hw/qdev-properties.h"
#include "hw/pci/pci_bridge.h"
+#include "hw/cxl/cxl.h"
#include "qemu/range.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
@@ -56,6 +57,16 @@ DECLARE_INSTANCE_CHECKER(PXBDev, PXB_DEV,
DECLARE_INSTANCE_CHECKER(PXBDev, PXB_PCIE_DEV,
TYPE_PXB_PCIE_DEVICE)
+#define TYPE_PXB_CXL_DEVICE "pxb-cxl"
+DECLARE_INSTANCE_CHECKER(PXBDev, PXB_CXL_DEV,
+ TYPE_PXB_CXL_DEVICE)
+
+typedef struct CXLHost {
+ PCIHostState parent_obj;
+
+ CXLComponentState cxl_cstate;
+} CXLHost;
+
struct PXBDev {
/*< private >*/
PCIDevice parent_obj;
@@ -68,6 +79,11 @@ struct PXBDev {
static PXBDev *convert_to_pxb(PCIDevice *dev)
{
+ /* A CXL PXB's parent bus is PCIe, so the normal check won't work */
+ if (object_dynamic_cast(OBJECT(dev), TYPE_PXB_CXL_DEVICE)) {
+ return PXB_CXL_DEV(dev);
+ }
+
return pci_bus_is_express(pci_get_bus(dev))
? PXB_PCIE_DEV(dev) : PXB_DEV(dev);
}
@@ -112,11 +128,20 @@ static const TypeInfo pxb_pcie_bus_info = {
.class_init = pxb_bus_class_init,
};
+static const TypeInfo pxb_cxl_bus_info = {
+ .name = TYPE_PXB_CXL_BUS,
+ .parent = TYPE_CXL_BUS,
+ .instance_size = sizeof(PXBBus),
+ .class_init = pxb_bus_class_init,
+};
+
static const char *pxb_host_root_bus_path(PCIHostState *host_bridge,
PCIBus *rootbus)
{
- PXBBus *bus = pci_bus_is_express(rootbus) ?
- PXB_PCIE_BUS(rootbus) : PXB_BUS(rootbus);
+ PXBBus *bus = pci_bus_is_cxl(rootbus) ?
+ PXB_CXL_BUS(rootbus) :
+ pci_bus_is_express(rootbus) ? PXB_PCIE_BUS(rootbus) :
+ PXB_BUS(rootbus);
snprintf(bus->bus_path, 8, "0000:%02x", pxb_bus_num(rootbus));
return bus->bus_path;
@@ -218,6 +243,10 @@ static int pxb_map_irq_fn(PCIDevice *pci_dev, int pin)
return pin - PCI_SLOT(pxb->devfn);
}
+static void pxb_dev_reset(DeviceState *dev)
+{
+}
+
static gint pxb_compare(gconstpointer a, gconstpointer b)
{
const PXBDev *pxb_a = a, *pxb_b = b;
@@ -389,13 +418,66 @@ static const TypeInfo pxb_pcie_dev_info = {
},
};
+static void pxb_cxl_dev_realize(PCIDevice *dev, Error **errp)
+{
+ MachineState *ms = MACHINE(qdev_get_machine());
+
+ /* A CXL PXB's parent bus is still PCIe */
+ if (!pci_bus_is_express(pci_get_bus(dev))) {
+ error_setg(errp, "pxb-cxl devices cannot reside on a PCI bus");
+ return;
+ }
+ if (!ms->cxl_devices_state->is_enabled) {
+ error_setg(errp, "Machine does not have cxl=on");
+ return;
+ }
+
+ pxb_dev_realize_common(dev, CXL, errp);
+ pxb_dev_reset(DEVICE(dev));
+}
+
+static void pxb_cxl_dev_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->realize = pxb_cxl_dev_realize;
+ k->exit = pxb_dev_exitfn;
+ /*
+ * XXX: These types of bridges don't actually show up in the hierarchy so
+ * vendor, device, class, etc. ids are intentionally left out.
+ */
+
+ dc->desc = "CXL Host Bridge";
+ device_class_set_props(dc, pxb_dev_properties);
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+
+ /* Host bridges aren't hotpluggable. FIXME: spec reference */
+ dc->hotpluggable = false;
+ dc->reset = pxb_dev_reset;
+}
+
+static const TypeInfo pxb_cxl_dev_info = {
+ .name = TYPE_PXB_CXL_DEVICE,
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(PXBDev),
+ .class_init = pxb_cxl_dev_class_init,
+ .interfaces =
+ (InterfaceInfo[]){
+ { INTERFACE_CONVENTIONAL_PCI_DEVICE },
+ {},
+ },
+};
+
static void pxb_register_types(void)
{
type_register_static(&pxb_bus_info);
type_register_static(&pxb_pcie_bus_info);
+ type_register_static(&pxb_cxl_bus_info);
type_register_static(&pxb_host_info);
type_register_static(&pxb_dev_info);
type_register_static(&pxb_pcie_dev_info);
+ type_register_static(&pxb_cxl_dev_info);
}
type_init(pxb_register_types)
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 08bd2db2ad..41ec9ed43d 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -228,6 +228,12 @@ static const TypeInfo pcie_bus_info = {
.class_init = pcie_bus_class_init,
};
+static const TypeInfo cxl_bus_info = {
+ .name = TYPE_CXL_BUS,
+ .parent = TYPE_PCIE_BUS,
+ .class_init = pcie_bus_class_init,
+};
+
static PCIBus *pci_find_bus_nr(PCIBus *bus, int bus_num);
static void pci_update_mappings(PCIDevice *d);
static void pci_irq_handler(void *opaque, int irq_num, int level);
@@ -2945,6 +2951,7 @@ static void pci_register_types(void)
{
type_register_static(&pci_bus_info);
type_register_static(&pcie_bus_info);
+ type_register_static(&cxl_bus_info);
type_register_static(&conventional_pci_interface_info);
type_register_static(&cxl_interface_info);
type_register_static(&pcie_interface_info);
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index 98f0d1b844..44dacfa224 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -408,6 +408,7 @@ typedef PCIINTxRoute (*pci_route_irq_fn)(void *opaque, int pin);
#define TYPE_PCI_BUS "PCI"
OBJECT_DECLARE_TYPE(PCIBus, PCIBusClass, PCI_BUS)
#define TYPE_PCIE_BUS "PCIE"
+#define TYPE_CXL_BUS "CXL"
typedef void (*pci_bus_dev_fn)(PCIBus *b, PCIDevice *d, void *opaque);
typedef void (*pci_bus_fn)(PCIBus *b, void *opaque);
@@ -770,6 +771,11 @@ static inline void pci_irq_pulse(PCIDevice *pci_dev)
pci_irq_deassert(pci_dev);
}
+static inline int pci_is_cxl(const PCIDevice *d)
+{
+ return d->cap_present & QEMU_PCIE_CAP_CXL;
+}
+
static inline int pci_is_express(const PCIDevice *d)
{
return d->cap_present & QEMU_PCI_CAP_EXPRESS;
diff --git a/scripts/device-crash-test b/scripts/device-crash-test
index 4bfc68c008..a203b3fdea 100755
--- a/scripts/device-crash-test
+++ b/scripts/device-crash-test
@@ -93,6 +93,7 @@ ERROR_RULE_LIST = [
{'device':'pci-bridge', 'expected':True}, # Bridge chassis not specified. Each bridge is required to be assigned a unique chassis id > 0.
{'device':'pci-bridge-seat', 'expected':True}, # Bridge chassis not specified. Each bridge is required to be assigned a unique chassis id > 0.
{'device':'pxb', 'expected':True}, # Bridge chassis not specified. Each bridge is required to be assigned a unique chassis id > 0.
+ {'device':'pxb-cxl', 'expected':True}, # pxb-cxl devices cannot reside on a PCI bus.
{'device':'scsi-block', 'expected':True}, # drive property not set
{'device':'scsi-generic', 'expected':True}, # drive property not set
{'device':'scsi-hd', 'expected':True}, # drive property not set
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 15/45] qtest/cxl: Introduce initial test for pxb-cxl only.
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Initial test with just pxb-cxl. Other tests will be added
alongside functionality.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
---
tests/qtest/cxl-test.c | 22 ++++++++++++++++++++++
tests/qtest/meson.build | 4 ++++
2 files changed, 26 insertions(+)
diff --git a/tests/qtest/cxl-test.c b/tests/qtest/cxl-test.c
new file mode 100644
index 0000000000..c031049930
--- /dev/null
+++ b/tests/qtest/cxl-test.c
@@ -0,0 +1,22 @@
+/*
+ * QTest testcase for CXL
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest-single.h"
+
+static void cxl_basic_pxb(void)
+{
+ qtest_start("-machine q35,cxl=on -device pxb-cxl,bus=pcie.0");
+ qtest_end();
+}
+
+int main(int argc, char **argv)
+{
+ g_test_init(&argc, &argv, NULL);
+ qtest_add_func("/pci/cxl/basic_pxb", cxl_basic_pxb);
+ return g_test_run();
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 22e1361210..dedb477890 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -35,6 +35,9 @@ qtests_pci = \
(config_all_devices.has_key('CONFIG_VGA') ? ['display-vga-test'] : []) + \
(config_all_devices.has_key('CONFIG_IVSHMEM_DEVICE') ? ['ivshmem-test'] : [])
+qtests_cxl = \
+ (config_all_devices.has_key('CONFIG_CXL') ? ['cxl-test'] : [])
+
qtests_i386 = \
(slirp.found() ? ['pxe-test', 'test-netfilter'] : []) + \
(config_host.has_key('CONFIG_POSIX') ? ['test-filter-mirror'] : []) + \
@@ -74,6 +77,7 @@ qtests_i386 = \
slirp.found() ? ['virtio-net-failover'] : []) + \
(unpack_edk2_blobs ? ['bios-tables-test'] : []) + \
qtests_pci + \
+ qtests_cxl + \
['fdc-test',
'ide-test',
'hd-geo-test',
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 15/45] qtest/cxl: Introduce initial test for pxb-cxl only.
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Initial test with just pxb-cxl. Other tests will be added
alongside functionality.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
---
tests/qtest/cxl-test.c | 22 ++++++++++++++++++++++
tests/qtest/meson.build | 4 ++++
2 files changed, 26 insertions(+)
diff --git a/tests/qtest/cxl-test.c b/tests/qtest/cxl-test.c
new file mode 100644
index 0000000000..c031049930
--- /dev/null
+++ b/tests/qtest/cxl-test.c
@@ -0,0 +1,22 @@
+/*
+ * QTest testcase for CXL
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest-single.h"
+
+static void cxl_basic_pxb(void)
+{
+ qtest_start("-machine q35,cxl=on -device pxb-cxl,bus=pcie.0");
+ qtest_end();
+}
+
+int main(int argc, char **argv)
+{
+ g_test_init(&argc, &argv, NULL);
+ qtest_add_func("/pci/cxl/basic_pxb", cxl_basic_pxb);
+ return g_test_run();
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 22e1361210..dedb477890 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -35,6 +35,9 @@ qtests_pci = \
(config_all_devices.has_key('CONFIG_VGA') ? ['display-vga-test'] : []) + \
(config_all_devices.has_key('CONFIG_IVSHMEM_DEVICE') ? ['ivshmem-test'] : [])
+qtests_cxl = \
+ (config_all_devices.has_key('CONFIG_CXL') ? ['cxl-test'] : [])
+
qtests_i386 = \
(slirp.found() ? ['pxe-test', 'test-netfilter'] : []) + \
(config_host.has_key('CONFIG_POSIX') ? ['test-filter-mirror'] : []) + \
@@ -74,6 +77,7 @@ qtests_i386 = \
slirp.found() ? ['virtio-net-failover'] : []) + \
(unpack_edk2_blobs ? ['bios-tables-test'] : []) + \
qtests_pci + \
+ qtests_cxl + \
['fdc-test',
'ide-test',
'hd-geo-test',
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 16/45] hw/cxl/rp: Add a root port
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
This adds just enough of a root port implementation to be able to
enumerate root ports (creating the required DVSEC entries). What's not
here yet is the MMIO nor the ability to write some of the DVSEC entries.
This can be added with the qemu commandline by adding a rootport to a
specific CXL host bridge. For example:
-device cxl-rp,id=rp0,bus="cxl.0",addr=0.0,chassis=4
Like the host bridge patch, the ACPI tables aren't generated at this
point and so system software cannot use it.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/pci-bridge/Kconfig | 5 +
hw/pci-bridge/cxl_root_port.c | 236 +++++++++++++++++++++++++++++++++
hw/pci-bridge/meson.build | 1 +
hw/pci-bridge/pcie_root_port.c | 6 +-
hw/pci/pci.c | 4 +-
5 files changed, 250 insertions(+), 2 deletions(-)
diff --git a/hw/pci-bridge/Kconfig b/hw/pci-bridge/Kconfig
index f8df4315ba..02614f49aa 100644
--- a/hw/pci-bridge/Kconfig
+++ b/hw/pci-bridge/Kconfig
@@ -27,3 +27,8 @@ config DEC_PCI
config SIMBA
bool
+
+config CXL
+ bool
+ default y if PCI_EXPRESS && PXB
+ depends on PCI_EXPRESS && MSI_NONBROKEN && PXB
diff --git a/hw/pci-bridge/cxl_root_port.c b/hw/pci-bridge/cxl_root_port.c
new file mode 100644
index 0000000000..fb213fa06e
--- /dev/null
+++ b/hw/pci-bridge/cxl_root_port.c
@@ -0,0 +1,236 @@
+/*
+ * CXL 2.0 Root Port Implementation
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/range.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pcie_port.h"
+#include "hw/qdev-properties.h"
+#include "hw/sysbus.h"
+#include "qapi/error.h"
+#include "hw/cxl/cxl.h"
+
+#define CXL_ROOT_PORT_DID 0x7075
+
+/* Copied from the gen root port which we derive */
+#define GEN_PCIE_ROOT_PORT_AER_OFFSET 0x100
+#define GEN_PCIE_ROOT_PORT_ACS_OFFSET \
+ (GEN_PCIE_ROOT_PORT_AER_OFFSET + PCI_ERR_SIZEOF)
+#define CXL_ROOT_PORT_DVSEC_OFFSET \
+ (GEN_PCIE_ROOT_PORT_ACS_OFFSET + PCI_ACS_SIZEOF)
+
+typedef struct CXLRootPort {
+ /*< private >*/
+ PCIESlot parent_obj;
+
+ CXLComponentState cxl_cstate;
+ PCIResReserve res_reserve;
+} CXLRootPort;
+
+#define TYPE_CXL_ROOT_PORT "cxl-rp"
+DECLARE_INSTANCE_CHECKER(CXLRootPort, CXL_ROOT_PORT, TYPE_CXL_ROOT_PORT)
+
+static void latch_registers(CXLRootPort *crp)
+{
+ uint32_t *reg_state = crp->cxl_cstate.crb.cache_mem_registers;
+ uint32_t *write_msk = crp->cxl_cstate.crb.cache_mem_regs_write_mask;
+
+ cxl_component_register_init_common(reg_state, write_msk, CXL2_ROOT_PORT);
+}
+
+static void build_dvsecs(CXLComponentState *cxl)
+{
+ uint8_t *dvsec;
+
+ dvsec = (uint8_t *)&(CXLDVSECPortExtensions){ 0 };
+ cxl_component_create_dvsec(cxl, CXL2_ROOT_PORT,
+ EXTENSIONS_PORT_DVSEC_LENGTH,
+ EXTENSIONS_PORT_DVSEC,
+ EXTENSIONS_PORT_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECPortGPF){
+ .rsvd = 0,
+ .phase1_ctrl = 1, /* 1μs timeout */
+ .phase2_ctrl = 1, /* 1μs timeout */
+ };
+ cxl_component_create_dvsec(cxl, CXL2_ROOT_PORT,
+ GPF_PORT_DVSEC_LENGTH, GPF_PORT_DVSEC,
+ GPF_PORT_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECPortFlexBus){
+ .cap = 0x26, /* IO, Mem, non-MLD */
+ .ctrl = 0x2,
+ .status = 0x26, /* same */
+ .rcvd_mod_ts_data_phase1 = 0xef,
+ };
+ cxl_component_create_dvsec(cxl, CXL2_ROOT_PORT,
+ PCIE_FLEXBUS_PORT_DVSEC_LENGTH_2_0,
+ PCIE_FLEXBUS_PORT_DVSEC,
+ PCIE_FLEXBUS_PORT_DVSEC_REVID_2_0, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){
+ .rsvd = 0,
+ .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX,
+ .reg0_base_hi = 0,
+ };
+ cxl_component_create_dvsec(cxl, CXL2_ROOT_PORT,
+ REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC,
+ REG_LOC_DVSEC_REVID, dvsec);
+}
+
+static void cxl_rp_realize(DeviceState *dev, Error **errp)
+{
+ PCIDevice *pci_dev = PCI_DEVICE(dev);
+ PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(dev);
+ CXLRootPort *crp = CXL_ROOT_PORT(dev);
+ CXLComponentState *cxl_cstate = &crp->cxl_cstate;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ MemoryRegion *component_bar = &cregs->component_registers;
+ Error *local_err = NULL;
+
+ rpc->parent_realize(dev, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ int rc =
+ pci_bridge_qemu_reserve_cap_init(pci_dev, 0, crp->res_reserve, errp);
+ if (rc < 0) {
+ rpc->parent_class.exit(pci_dev);
+ return;
+ }
+
+ if (!crp->res_reserve.io || crp->res_reserve.io == -1) {
+ pci_word_test_and_clear_mask(pci_dev->wmask + PCI_COMMAND,
+ PCI_COMMAND_IO);
+ pci_dev->wmask[PCI_IO_BASE] = 0;
+ pci_dev->wmask[PCI_IO_LIMIT] = 0;
+ }
+
+ cxl_cstate->dvsec_offset = CXL_ROOT_PORT_DVSEC_OFFSET;
+ cxl_cstate->pdev = pci_dev;
+ build_dvsecs(&crp->cxl_cstate);
+
+ cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
+ TYPE_CXL_ROOT_PORT);
+
+ pci_register_bar(pci_dev, CXL_COMPONENT_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64,
+ component_bar);
+}
+
+static void cxl_rp_reset(DeviceState *dev)
+{
+ PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(dev);
+ CXLRootPort *crp = CXL_ROOT_PORT(dev);
+
+ rpc->parent_reset(dev);
+
+ latch_registers(crp);
+}
+
+static Property gen_rp_props[] = {
+ DEFINE_PROP_UINT32("bus-reserve", CXLRootPort, res_reserve.bus, -1),
+ DEFINE_PROP_SIZE("io-reserve", CXLRootPort, res_reserve.io, -1),
+ DEFINE_PROP_SIZE("mem-reserve", CXLRootPort, res_reserve.mem_non_pref, -1),
+ DEFINE_PROP_SIZE("pref32-reserve", CXLRootPort, res_reserve.mem_pref_32,
+ -1),
+ DEFINE_PROP_SIZE("pref64-reserve", CXLRootPort, res_reserve.mem_pref_64,
+ -1),
+ DEFINE_PROP_END_OF_LIST()
+};
+
+static void cxl_rp_dvsec_write_config(PCIDevice *dev, uint32_t addr,
+ uint32_t val, int len)
+{
+ CXLRootPort *crp = CXL_ROOT_PORT(dev);
+
+ if (range_contains(&crp->cxl_cstate.dvsecs[EXTENSIONS_PORT_DVSEC], addr)) {
+ uint8_t *reg = &dev->config[addr];
+ addr -= crp->cxl_cstate.dvsecs[EXTENSIONS_PORT_DVSEC].lob;
+ if (addr == PORT_CONTROL_OFFSET) {
+ if (pci_get_word(reg) & PORT_CONTROL_UNMASK_SBR) {
+ /* unmask SBR */
+ qemu_log_mask(LOG_UNIMP, "SBR mask control is not supported\n");
+ }
+ if (pci_get_word(reg) & PORT_CONTROL_ALT_MEMID_EN) {
+ /* Alt Memory & ID Space Enable */
+ qemu_log_mask(LOG_UNIMP,
+ "Alt Memory & ID space is not supported\n");
+ }
+ }
+ }
+}
+
+static void cxl_rp_write_config(PCIDevice *d, uint32_t address, uint32_t val,
+ int len)
+{
+ uint16_t slt_ctl, slt_sta;
+
+ pcie_cap_slot_get(d, &slt_ctl, &slt_sta);
+ pci_bridge_write_config(d, address, val, len);
+ pcie_cap_flr_write_config(d, address, val, len);
+ pcie_cap_slot_write_config(d, slt_ctl, slt_sta, address, val, len);
+ pcie_aer_write_config(d, address, val, len);
+
+ cxl_rp_dvsec_write_config(d, address, val, len);
+}
+
+static void cxl_root_port_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(oc);
+ PCIERootPortClass *rpc = PCIE_ROOT_PORT_CLASS(oc);
+
+ k->vendor_id = PCI_VENDOR_ID_INTEL;
+ k->device_id = CXL_ROOT_PORT_DID;
+ dc->desc = "CXL Root Port";
+ k->revision = 0;
+ device_class_set_props(dc, gen_rp_props);
+ k->config_write = cxl_rp_write_config;
+
+ device_class_set_parent_realize(dc, cxl_rp_realize, &rpc->parent_realize);
+ device_class_set_parent_reset(dc, cxl_rp_reset, &rpc->parent_reset);
+
+ rpc->aer_offset = GEN_PCIE_ROOT_PORT_AER_OFFSET;
+ rpc->acs_offset = GEN_PCIE_ROOT_PORT_ACS_OFFSET;
+
+ dc->hotpluggable = false;
+}
+
+static const TypeInfo cxl_root_port_info = {
+ .name = TYPE_CXL_ROOT_PORT,
+ .parent = TYPE_PCIE_ROOT_PORT,
+ .instance_size = sizeof(CXLRootPort),
+ .class_init = cxl_root_port_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_CXL_DEVICE },
+ { }
+ },
+};
+
+static void cxl_register(void)
+{
+ type_register_static(&cxl_root_port_info);
+}
+
+type_init(cxl_register);
diff --git a/hw/pci-bridge/meson.build b/hw/pci-bridge/meson.build
index daab8acf2a..b6d26a03d5 100644
--- a/hw/pci-bridge/meson.build
+++ b/hw/pci-bridge/meson.build
@@ -5,6 +5,7 @@ pci_ss.add(when: 'CONFIG_IOH3420', if_true: files('ioh3420.c'))
pci_ss.add(when: 'CONFIG_PCIE_PORT', if_true: files('pcie_root_port.c', 'gen_pcie_root_port.c', 'pcie_pci_bridge.c'))
pci_ss.add(when: 'CONFIG_PXB', if_true: files('pci_expander_bridge.c'))
pci_ss.add(when: 'CONFIG_XIO3130', if_true: files('xio3130_upstream.c', 'xio3130_downstream.c'))
+pci_ss.add(when: 'CONFIG_CXL', if_true: files('cxl_root_port.c'))
# NewWorld PowerMac
pci_ss.add(when: 'CONFIG_DEC_PCI', if_true: files('dec.c'))
diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c
index f1cfe9d14a..460e48269d 100644
--- a/hw/pci-bridge/pcie_root_port.c
+++ b/hw/pci-bridge/pcie_root_port.c
@@ -67,7 +67,11 @@ static void rp_realize(PCIDevice *d, Error **errp)
int rc;
pci_config_set_interrupt_pin(d->config, 1);
- pci_bridge_initfn(d, TYPE_PCIE_BUS);
+ if (d->cap_present & QEMU_PCIE_CAP_CXL) {
+ pci_bridge_initfn(d, TYPE_CXL_BUS);
+ } else {
+ pci_bridge_initfn(d, TYPE_PCIE_BUS);
+ }
pcie_port_init_reg(d);
rc = pci_bridge_ssvid_init(d, rpc->ssvid_offset, dc->vendor_id,
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 41ec9ed43d..b888b5201e 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -2761,7 +2761,9 @@ static void pci_device_class_base_init(ObjectClass *klass, void *data)
object_class_dynamic_cast(klass, INTERFACE_CONVENTIONAL_PCI_DEVICE);
ObjectClass *pcie =
object_class_dynamic_cast(klass, INTERFACE_PCIE_DEVICE);
- assert(conventional || pcie);
+ ObjectClass *cxl =
+ object_class_dynamic_cast(klass, INTERFACE_CXL_DEVICE);
+ assert(conventional || pcie || cxl);
}
}
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 16/45] hw/cxl/rp: Add a root port
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
This adds just enough of a root port implementation to be able to
enumerate root ports (creating the required DVSEC entries). What's not
here yet is the MMIO nor the ability to write some of the DVSEC entries.
This can be added with the qemu commandline by adding a rootport to a
specific CXL host bridge. For example:
-device cxl-rp,id=rp0,bus="cxl.0",addr=0.0,chassis=4
Like the host bridge patch, the ACPI tables aren't generated at this
point and so system software cannot use it.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/pci-bridge/Kconfig | 5 +
hw/pci-bridge/cxl_root_port.c | 236 +++++++++++++++++++++++++++++++++
hw/pci-bridge/meson.build | 1 +
hw/pci-bridge/pcie_root_port.c | 6 +-
hw/pci/pci.c | 4 +-
5 files changed, 250 insertions(+), 2 deletions(-)
diff --git a/hw/pci-bridge/Kconfig b/hw/pci-bridge/Kconfig
index f8df4315ba..02614f49aa 100644
--- a/hw/pci-bridge/Kconfig
+++ b/hw/pci-bridge/Kconfig
@@ -27,3 +27,8 @@ config DEC_PCI
config SIMBA
bool
+
+config CXL
+ bool
+ default y if PCI_EXPRESS && PXB
+ depends on PCI_EXPRESS && MSI_NONBROKEN && PXB
diff --git a/hw/pci-bridge/cxl_root_port.c b/hw/pci-bridge/cxl_root_port.c
new file mode 100644
index 0000000000..fb213fa06e
--- /dev/null
+++ b/hw/pci-bridge/cxl_root_port.c
@@ -0,0 +1,236 @@
+/*
+ * CXL 2.0 Root Port Implementation
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/range.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pcie_port.h"
+#include "hw/qdev-properties.h"
+#include "hw/sysbus.h"
+#include "qapi/error.h"
+#include "hw/cxl/cxl.h"
+
+#define CXL_ROOT_PORT_DID 0x7075
+
+/* Copied from the gen root port which we derive */
+#define GEN_PCIE_ROOT_PORT_AER_OFFSET 0x100
+#define GEN_PCIE_ROOT_PORT_ACS_OFFSET \
+ (GEN_PCIE_ROOT_PORT_AER_OFFSET + PCI_ERR_SIZEOF)
+#define CXL_ROOT_PORT_DVSEC_OFFSET \
+ (GEN_PCIE_ROOT_PORT_ACS_OFFSET + PCI_ACS_SIZEOF)
+
+typedef struct CXLRootPort {
+ /*< private >*/
+ PCIESlot parent_obj;
+
+ CXLComponentState cxl_cstate;
+ PCIResReserve res_reserve;
+} CXLRootPort;
+
+#define TYPE_CXL_ROOT_PORT "cxl-rp"
+DECLARE_INSTANCE_CHECKER(CXLRootPort, CXL_ROOT_PORT, TYPE_CXL_ROOT_PORT)
+
+static void latch_registers(CXLRootPort *crp)
+{
+ uint32_t *reg_state = crp->cxl_cstate.crb.cache_mem_registers;
+ uint32_t *write_msk = crp->cxl_cstate.crb.cache_mem_regs_write_mask;
+
+ cxl_component_register_init_common(reg_state, write_msk, CXL2_ROOT_PORT);
+}
+
+static void build_dvsecs(CXLComponentState *cxl)
+{
+ uint8_t *dvsec;
+
+ dvsec = (uint8_t *)&(CXLDVSECPortExtensions){ 0 };
+ cxl_component_create_dvsec(cxl, CXL2_ROOT_PORT,
+ EXTENSIONS_PORT_DVSEC_LENGTH,
+ EXTENSIONS_PORT_DVSEC,
+ EXTENSIONS_PORT_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECPortGPF){
+ .rsvd = 0,
+ .phase1_ctrl = 1, /* 1μs timeout */
+ .phase2_ctrl = 1, /* 1μs timeout */
+ };
+ cxl_component_create_dvsec(cxl, CXL2_ROOT_PORT,
+ GPF_PORT_DVSEC_LENGTH, GPF_PORT_DVSEC,
+ GPF_PORT_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECPortFlexBus){
+ .cap = 0x26, /* IO, Mem, non-MLD */
+ .ctrl = 0x2,
+ .status = 0x26, /* same */
+ .rcvd_mod_ts_data_phase1 = 0xef,
+ };
+ cxl_component_create_dvsec(cxl, CXL2_ROOT_PORT,
+ PCIE_FLEXBUS_PORT_DVSEC_LENGTH_2_0,
+ PCIE_FLEXBUS_PORT_DVSEC,
+ PCIE_FLEXBUS_PORT_DVSEC_REVID_2_0, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){
+ .rsvd = 0,
+ .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX,
+ .reg0_base_hi = 0,
+ };
+ cxl_component_create_dvsec(cxl, CXL2_ROOT_PORT,
+ REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC,
+ REG_LOC_DVSEC_REVID, dvsec);
+}
+
+static void cxl_rp_realize(DeviceState *dev, Error **errp)
+{
+ PCIDevice *pci_dev = PCI_DEVICE(dev);
+ PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(dev);
+ CXLRootPort *crp = CXL_ROOT_PORT(dev);
+ CXLComponentState *cxl_cstate = &crp->cxl_cstate;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ MemoryRegion *component_bar = &cregs->component_registers;
+ Error *local_err = NULL;
+
+ rpc->parent_realize(dev, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ int rc =
+ pci_bridge_qemu_reserve_cap_init(pci_dev, 0, crp->res_reserve, errp);
+ if (rc < 0) {
+ rpc->parent_class.exit(pci_dev);
+ return;
+ }
+
+ if (!crp->res_reserve.io || crp->res_reserve.io == -1) {
+ pci_word_test_and_clear_mask(pci_dev->wmask + PCI_COMMAND,
+ PCI_COMMAND_IO);
+ pci_dev->wmask[PCI_IO_BASE] = 0;
+ pci_dev->wmask[PCI_IO_LIMIT] = 0;
+ }
+
+ cxl_cstate->dvsec_offset = CXL_ROOT_PORT_DVSEC_OFFSET;
+ cxl_cstate->pdev = pci_dev;
+ build_dvsecs(&crp->cxl_cstate);
+
+ cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
+ TYPE_CXL_ROOT_PORT);
+
+ pci_register_bar(pci_dev, CXL_COMPONENT_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64,
+ component_bar);
+}
+
+static void cxl_rp_reset(DeviceState *dev)
+{
+ PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(dev);
+ CXLRootPort *crp = CXL_ROOT_PORT(dev);
+
+ rpc->parent_reset(dev);
+
+ latch_registers(crp);
+}
+
+static Property gen_rp_props[] = {
+ DEFINE_PROP_UINT32("bus-reserve", CXLRootPort, res_reserve.bus, -1),
+ DEFINE_PROP_SIZE("io-reserve", CXLRootPort, res_reserve.io, -1),
+ DEFINE_PROP_SIZE("mem-reserve", CXLRootPort, res_reserve.mem_non_pref, -1),
+ DEFINE_PROP_SIZE("pref32-reserve", CXLRootPort, res_reserve.mem_pref_32,
+ -1),
+ DEFINE_PROP_SIZE("pref64-reserve", CXLRootPort, res_reserve.mem_pref_64,
+ -1),
+ DEFINE_PROP_END_OF_LIST()
+};
+
+static void cxl_rp_dvsec_write_config(PCIDevice *dev, uint32_t addr,
+ uint32_t val, int len)
+{
+ CXLRootPort *crp = CXL_ROOT_PORT(dev);
+
+ if (range_contains(&crp->cxl_cstate.dvsecs[EXTENSIONS_PORT_DVSEC], addr)) {
+ uint8_t *reg = &dev->config[addr];
+ addr -= crp->cxl_cstate.dvsecs[EXTENSIONS_PORT_DVSEC].lob;
+ if (addr == PORT_CONTROL_OFFSET) {
+ if (pci_get_word(reg) & PORT_CONTROL_UNMASK_SBR) {
+ /* unmask SBR */
+ qemu_log_mask(LOG_UNIMP, "SBR mask control is not supported\n");
+ }
+ if (pci_get_word(reg) & PORT_CONTROL_ALT_MEMID_EN) {
+ /* Alt Memory & ID Space Enable */
+ qemu_log_mask(LOG_UNIMP,
+ "Alt Memory & ID space is not supported\n");
+ }
+ }
+ }
+}
+
+static void cxl_rp_write_config(PCIDevice *d, uint32_t address, uint32_t val,
+ int len)
+{
+ uint16_t slt_ctl, slt_sta;
+
+ pcie_cap_slot_get(d, &slt_ctl, &slt_sta);
+ pci_bridge_write_config(d, address, val, len);
+ pcie_cap_flr_write_config(d, address, val, len);
+ pcie_cap_slot_write_config(d, slt_ctl, slt_sta, address, val, len);
+ pcie_aer_write_config(d, address, val, len);
+
+ cxl_rp_dvsec_write_config(d, address, val, len);
+}
+
+static void cxl_root_port_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(oc);
+ PCIERootPortClass *rpc = PCIE_ROOT_PORT_CLASS(oc);
+
+ k->vendor_id = PCI_VENDOR_ID_INTEL;
+ k->device_id = CXL_ROOT_PORT_DID;
+ dc->desc = "CXL Root Port";
+ k->revision = 0;
+ device_class_set_props(dc, gen_rp_props);
+ k->config_write = cxl_rp_write_config;
+
+ device_class_set_parent_realize(dc, cxl_rp_realize, &rpc->parent_realize);
+ device_class_set_parent_reset(dc, cxl_rp_reset, &rpc->parent_reset);
+
+ rpc->aer_offset = GEN_PCIE_ROOT_PORT_AER_OFFSET;
+ rpc->acs_offset = GEN_PCIE_ROOT_PORT_ACS_OFFSET;
+
+ dc->hotpluggable = false;
+}
+
+static const TypeInfo cxl_root_port_info = {
+ .name = TYPE_CXL_ROOT_PORT,
+ .parent = TYPE_PCIE_ROOT_PORT,
+ .instance_size = sizeof(CXLRootPort),
+ .class_init = cxl_root_port_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_CXL_DEVICE },
+ { }
+ },
+};
+
+static void cxl_register(void)
+{
+ type_register_static(&cxl_root_port_info);
+}
+
+type_init(cxl_register);
diff --git a/hw/pci-bridge/meson.build b/hw/pci-bridge/meson.build
index daab8acf2a..b6d26a03d5 100644
--- a/hw/pci-bridge/meson.build
+++ b/hw/pci-bridge/meson.build
@@ -5,6 +5,7 @@ pci_ss.add(when: 'CONFIG_IOH3420', if_true: files('ioh3420.c'))
pci_ss.add(when: 'CONFIG_PCIE_PORT', if_true: files('pcie_root_port.c', 'gen_pcie_root_port.c', 'pcie_pci_bridge.c'))
pci_ss.add(when: 'CONFIG_PXB', if_true: files('pci_expander_bridge.c'))
pci_ss.add(when: 'CONFIG_XIO3130', if_true: files('xio3130_upstream.c', 'xio3130_downstream.c'))
+pci_ss.add(when: 'CONFIG_CXL', if_true: files('cxl_root_port.c'))
# NewWorld PowerMac
pci_ss.add(when: 'CONFIG_DEC_PCI', if_true: files('dec.c'))
diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c
index f1cfe9d14a..460e48269d 100644
--- a/hw/pci-bridge/pcie_root_port.c
+++ b/hw/pci-bridge/pcie_root_port.c
@@ -67,7 +67,11 @@ static void rp_realize(PCIDevice *d, Error **errp)
int rc;
pci_config_set_interrupt_pin(d->config, 1);
- pci_bridge_initfn(d, TYPE_PCIE_BUS);
+ if (d->cap_present & QEMU_PCIE_CAP_CXL) {
+ pci_bridge_initfn(d, TYPE_CXL_BUS);
+ } else {
+ pci_bridge_initfn(d, TYPE_PCIE_BUS);
+ }
pcie_port_init_reg(d);
rc = pci_bridge_ssvid_init(d, rpc->ssvid_offset, dc->vendor_id,
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 41ec9ed43d..b888b5201e 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -2761,7 +2761,9 @@ static void pci_device_class_base_init(ObjectClass *klass, void *data)
object_class_dynamic_cast(klass, INTERFACE_CONVENTIONAL_PCI_DEVICE);
ObjectClass *pcie =
object_class_dynamic_cast(klass, INTERFACE_PCIE_DEVICE);
- assert(conventional || pcie);
+ ObjectClass *cxl =
+ object_class_dynamic_cast(klass, INTERFACE_CXL_DEVICE);
+ assert(conventional || pcie || cxl);
}
}
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 17/45] hw/cxl/device: Add a memory device (8.2.8.5)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
A CXL memory device (AKA Type 3) is a CXL component that contains some
combination of volatile and persistent memory. It also implements the
previously defined mailbox interface as well as the memory device
firmware interface.
Although the memory device is configured like a normal PCIe device, the
memory traffic is on an entirely separate bus conceptually (using the
same physical wires as PCIe, but different protocol).
Once the CXL topology is fully configure and address decoders committed,
the guest physical address for the memory device is part of a larger
window which is owned by the platform. The creation of these windows
is later in this series.
The following example will create a 256M device in a 512M window:
-object "memory-backend-file,id=cxl-mem1,share,mem-path=cxl-type3,size=512M"
-device "cxl-type3,bus=rp0,memdev=cxl-mem1,id=cxl-pmem0"
Note: Dropped PCDIMM info interfaces for now. They can be added if
appropriate at a later date.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-component-utils.c | 18 ++++
hw/cxl/cxl-mailbox-utils.c | 46 ++++++++++
hw/mem/Kconfig | 5 ++
hw/mem/cxl_type3.c | 162 +++++++++++++++++++++++++++++++++++
hw/mem/meson.build | 1 +
include/hw/cxl/cxl_device.h | 15 ++++
include/hw/cxl/cxl_pci.h | 21 +++++
include/hw/pci/pci_ids.h | 1 +
8 files changed, 269 insertions(+)
diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
index 9457a1b029..afc97b17c2 100644
--- a/hw/cxl/cxl-component-utils.c
+++ b/hw/cxl/cxl-component-utils.c
@@ -252,6 +252,24 @@ void cxl_component_create_dvsec(CXLComponentState *cxl,
/* Configure write masks */
switch (type) {
case PCIE_CXL_DEVICE_DVSEC:
+ /* Cntrl RW Lock - so needs explicit blocking when lock is set */
+ wmask[offset + offsetof(CXLDVSECDevice, ctrl)] = 0xFD;
+ wmask[offset + offsetof(CXLDVSECDevice, ctrl) + 1] = 0x4F;
+ /* Status is RW1CS */
+ wmask[offset + offsetof(CXLDVSECDevice, ctrl2)] = 0x0F;
+ /* Lock is RW Once */
+ wmask[offset + offsetof(CXLDVSECDevice, lock)] = 0x01;
+ /* range1/2_base_high/low is RW Lock */
+ wmask[offset + offsetof(CXLDVSECDevice, range1_base_hi)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range1_base_hi) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range1_base_hi) + 2] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range1_base_hi) + 3] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range1_base_lo) + 3] = 0xF0;
+ wmask[offset + offsetof(CXLDVSECDevice, range2_base_hi)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range2_base_hi) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range2_base_hi) + 2] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range2_base_hi) + 3] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range2_base_lo) + 3] = 0xF0;
break;
case NON_CXL_FUNCTION_MAP_DVSEC:
break; /* Not yet implemented */
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index db473135c7..4ae0561dfc 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -50,6 +50,8 @@ enum {
LOGS = 0x04,
#define GET_SUPPORTED 0x0
#define GET_LOG 0x1
+ IDENTIFY = 0x40,
+ #define MEMORY_DEVICE 0x0
};
/* 8.2.8.4.5.1 Command Return Codes */
@@ -214,6 +216,48 @@ static ret_code cmd_logs_get_log(struct cxl_cmd *cmd,
return CXL_MBOX_SUCCESS;
}
+/* 8.2.9.5.1.1 */
+static ret_code cmd_identify_memory_device(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct {
+ char fw_revision[0x10];
+ uint64_t total_capacity;
+ uint64_t volatile_capacity;
+ uint64_t persistent_capacity;
+ uint64_t partition_align;
+ uint16_t info_event_log_size;
+ uint16_t warning_event_log_size;
+ uint16_t failure_event_log_size;
+ uint16_t fatal_event_log_size;
+ uint32_t lsa_size;
+ uint8_t poison_list_max_mer[3];
+ uint16_t inject_poison_limit;
+ uint8_t poison_caps;
+ uint8_t qos_telemetry_caps;
+ } QEMU_PACKED *id;
+ QEMU_BUILD_BUG_ON(sizeof(*id) != 0x43);
+
+ uint64_t size = cxl_dstate->pmem_size;
+
+ if (!QEMU_IS_ALIGNED(size, 256 << 20)) {
+ return CXL_MBOX_INTERNAL_ERROR;
+ }
+
+ id = (void *)cmd->payload;
+ memset(id, 0, sizeof(*id));
+
+ /* PMEM only */
+ snprintf(id->fw_revision, 0x10, "BWFW VERSION %02d", 0);
+
+ id->total_capacity = size / (256 << 20);
+ id->persistent_capacity = size / (256 << 20);
+
+ *len = sizeof(*id);
+ return CXL_MBOX_SUCCESS;
+}
+
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
#define IMMEDIATE_POLICY_CHANGE (1 << 3)
#define IMMEDIATE_LOG_CHANGE (1 << 4)
@@ -231,6 +275,8 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
[TIMESTAMP][SET] = { "TIMESTAMP_SET", cmd_timestamp_set, 8, IMMEDIATE_POLICY_CHANGE },
[LOGS][GET_SUPPORTED] = { "LOGS_GET_SUPPORTED", cmd_logs_get_supported, 0, 0 },
[LOGS][GET_LOG] = { "LOGS_GET_LOG", cmd_logs_get_log, 0x18, 0 },
+ [IDENTIFY][MEMORY_DEVICE] = { "IDENTIFY_MEMORY_DEVICE",
+ cmd_identify_memory_device, 0, 0 },
};
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
diff --git a/hw/mem/Kconfig b/hw/mem/Kconfig
index 03dbb3c7df..73c5ae8ad9 100644
--- a/hw/mem/Kconfig
+++ b/hw/mem/Kconfig
@@ -11,3 +11,8 @@ config NVDIMM
config SPARSE_MEM
bool
+
+config CXL_MEM_DEVICE
+ bool
+ default y if CXL
+ select MEM_DEVICE
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
new file mode 100644
index 0000000000..290c088dd6
--- /dev/null
+++ b/hw/mem/cxl_type3.c
@@ -0,0 +1,162 @@
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qemu/error-report.h"
+#include "hw/mem/memory-device.h"
+#include "hw/mem/pc-dimm.h"
+#include "hw/pci/pci.h"
+#include "hw/qdev-properties.h"
+#include "qapi/error.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/range.h"
+#include "qemu/rcu.h"
+#include "sysemu/hostmem.h"
+#include "hw/cxl/cxl.h"
+
+static void build_dvsecs(CXLType3Dev *ct3d)
+{
+ CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
+ uint8_t *dvsec;
+
+ dvsec = (uint8_t *)&(CXLDVSECDevice){
+ .cap = 0x1e,
+ .ctrl = 0x2,
+ .status2 = 0x2,
+ .range1_size_hi = ct3d->hostmem->size >> 32,
+ .range1_size_lo = (2 << 5) | (2 << 2) | 0x3 |
+ (ct3d->hostmem->size & 0xF0000000),
+ .range1_base_hi = 0,
+ .range1_base_lo = 0,
+ };
+ cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE,
+ PCIE_CXL_DEVICE_DVSEC_LENGTH,
+ PCIE_CXL_DEVICE_DVSEC,
+ PCIE_CXL2_DEVICE_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){
+ .rsvd = 0,
+ .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX,
+ .reg0_base_hi = 0,
+ .reg1_base_lo = RBI_CXL_DEVICE_REG | CXL_DEVICE_REG_BAR_IDX,
+ .reg1_base_hi = 0,
+ };
+ cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE,
+ REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC,
+ REG_LOC_DVSEC_REVID, dvsec);
+ dvsec = (uint8_t *)&(CXLDVSECDeviceGPF){
+ .phase2_duration = 0x603, /* 3 seconds */
+ .phase2_power = 0x33, /* 0x33 miliwatts */
+ };
+ cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE,
+ GPF_DEVICE_DVSEC_LENGTH, GPF_PORT_DVSEC,
+ GPF_DEVICE_DVSEC_REVID, dvsec);
+}
+
+static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
+{
+ MemoryRegion *mr;
+
+ if (!ct3d->hostmem) {
+ error_setg(errp, "memdev property must be set");
+ return false;
+ }
+
+ mr = host_memory_backend_get_memory(ct3d->hostmem);
+ if (!mr) {
+ error_setg(errp, "memdev property must be set");
+ return false;
+ }
+ memory_region_set_nonvolatile(mr, true);
+ memory_region_set_enabled(mr, true);
+ host_memory_backend_set_mapped(ct3d->hostmem, true);
+ ct3d->cxl_dstate.pmem_size = ct3d->hostmem->size;
+
+ return true;
+}
+
+static void ct3_realize(PCIDevice *pci_dev, Error **errp)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(pci_dev);
+ CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
+ ComponentRegisters *regs = &cxl_cstate->crb;
+ MemoryRegion *mr = ®s->component_registers;
+ uint8_t *pci_conf = pci_dev->config;
+
+ if (!cxl_setup_memory(ct3d, errp)) {
+ return;
+ }
+
+ pci_config_set_prog_interface(pci_conf, 0x10);
+ pci_config_set_class(pci_conf, PCI_CLASS_MEMORY_CXL);
+
+ pcie_endpoint_cap_init(pci_dev, 0x80);
+ cxl_cstate->dvsec_offset = 0x100;
+
+ ct3d->cxl_cstate.pdev = pci_dev;
+ build_dvsecs(ct3d);
+
+ cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
+ TYPE_CXL_TYPE3);
+
+ pci_register_bar(
+ pci_dev, CXL_COMPONENT_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64, mr);
+
+ cxl_device_register_block_init(OBJECT(pci_dev), &ct3d->cxl_dstate);
+ pci_register_bar(pci_dev, CXL_DEVICE_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64,
+ &ct3d->cxl_dstate.device_registers);
+}
+
+static void ct3d_reset(DeviceState *dev)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(dev);
+ uint32_t *reg_state = ct3d->cxl_cstate.crb.cache_mem_registers;
+ uint32_t *write_msk = ct3d->cxl_cstate.crb.cache_mem_regs_write_mask;
+
+ cxl_component_register_init_common(reg_state, write_msk, CXL2_TYPE3_DEVICE);
+ cxl_device_register_init_common(&ct3d->cxl_dstate);
+}
+
+static Property ct3_props[] = {
+ DEFINE_PROP_LINK("memdev", CXLType3Dev, hostmem, TYPE_MEMORY_BACKEND,
+ HostMemoryBackend *),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ct3_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ PCIDeviceClass *pc = PCI_DEVICE_CLASS(oc);
+
+ pc->realize = ct3_realize;
+ pc->class_id = PCI_CLASS_STORAGE_EXPRESS;
+ pc->vendor_id = PCI_VENDOR_ID_INTEL;
+ pc->device_id = 0xd93; /* LVF for now */
+ pc->revision = 1;
+
+ set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
+ dc->desc = "CXL PMEM Device (Type 3)";
+ dc->reset = ct3d_reset;
+ device_class_set_props(dc, ct3_props);
+}
+
+static const TypeInfo ct3d_info = {
+ .name = TYPE_CXL_TYPE3,
+ .parent = TYPE_PCI_DEVICE,
+ .class_init = ct3_class_init,
+ .instance_size = sizeof(CXLType3Dev),
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_CXL_DEVICE },
+ { INTERFACE_PCIE_DEVICE },
+ {}
+ },
+};
+
+static void ct3d_registers(void)
+{
+ type_register_static(&ct3d_info);
+}
+
+type_init(ct3d_registers);
diff --git a/hw/mem/meson.build b/hw/mem/meson.build
index 82f86d117e..609b2b36fc 100644
--- a/hw/mem/meson.build
+++ b/hw/mem/meson.build
@@ -3,6 +3,7 @@ mem_ss.add(files('memory-device.c'))
mem_ss.add(when: 'CONFIG_DIMM', if_true: files('pc-dimm.c'))
mem_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_mc.c'))
mem_ss.add(when: 'CONFIG_NVDIMM', if_true: files('nvdimm.c'))
+mem_ss.add(when: 'CONFIG_CXL_MEM_DEVICE', if_true: files('cxl_type3.c'))
softmmu_ss.add_all(when: 'CONFIG_MEM_DEVICE', if_true: mem_ss)
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 797a22ddb4..d8da2c7b68 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -230,4 +230,19 @@ REG64(CXL_MEM_DEV_STS, 0)
FIELD(CXL_MEM_DEV_STS, MBOX_READY, 4, 1)
FIELD(CXL_MEM_DEV_STS, RESET_NEEDED, 5, 3)
+struct CXLType3Dev {
+ /* Private */
+ PCIDevice parent_obj;
+
+ /* Properties */
+ HostMemoryBackend *hostmem;
+
+ /* State */
+ CXLComponentState cxl_cstate;
+ CXLDeviceState cxl_dstate;
+};
+
+#define TYPE_CXL_TYPE3 "cxl-type3"
+OBJECT_DECLARE_SIMPLE_TYPE(CXLType3Dev, CXL_TYPE3)
+
#endif
diff --git a/include/hw/cxl/cxl_pci.h b/include/hw/cxl/cxl_pci.h
index 3f7e44daac..01cf002096 100644
--- a/include/hw/cxl/cxl_pci.h
+++ b/include/hw/cxl/cxl_pci.h
@@ -67,6 +67,27 @@ QEMU_BUILD_BUG_ON(sizeof(DVSECHeader) != 10);
* CXL 2.0 Downstream Port: 3, 4, 7, 8
*/
+/* CXL 2.0 - 8.1.3 (ID 0001) */
+typedef struct CXLDVSECDevice {
+ DVSECHeader hdr;
+ uint16_t cap;
+ uint16_t ctrl;
+ uint16_t status;
+ uint16_t ctrl2;
+ uint16_t status2;
+ uint16_t lock;
+ uint16_t cap2;
+ uint32_t range1_size_hi;
+ uint32_t range1_size_lo;
+ uint32_t range1_base_hi;
+ uint32_t range1_base_lo;
+ uint32_t range2_size_hi;
+ uint32_t range2_size_lo;
+ uint32_t range2_base_hi;
+ uint32_t range2_base_lo;
+} CXLDVSECDevice;
+QEMU_BUILD_BUG_ON(sizeof(CXLDVSECDevice) != 0x38);
+
/* CXL 2.0 - 8.1.5 (ID 0003) */
typedef struct CXLDVSECPortExtensions {
DVSECHeader hdr;
diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
index 11abe22d46..898083b86f 100644
--- a/include/hw/pci/pci_ids.h
+++ b/include/hw/pci/pci_ids.h
@@ -53,6 +53,7 @@
#define PCI_BASE_CLASS_MEMORY 0x05
#define PCI_CLASS_MEMORY_RAM 0x0500
#define PCI_CLASS_MEMORY_FLASH 0x0501
+#define PCI_CLASS_MEMORY_CXL 0x0502
#define PCI_CLASS_MEMORY_OTHER 0x0580
#define PCI_BASE_CLASS_BRIDGE 0x06
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 17/45] hw/cxl/device: Add a memory device (8.2.8.5)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
A CXL memory device (AKA Type 3) is a CXL component that contains some
combination of volatile and persistent memory. It also implements the
previously defined mailbox interface as well as the memory device
firmware interface.
Although the memory device is configured like a normal PCIe device, the
memory traffic is on an entirely separate bus conceptually (using the
same physical wires as PCIe, but different protocol).
Once the CXL topology is fully configure and address decoders committed,
the guest physical address for the memory device is part of a larger
window which is owned by the platform. The creation of these windows
is later in this series.
The following example will create a 256M device in a 512M window:
-object "memory-backend-file,id=cxl-mem1,share,mem-path=cxl-type3,size=512M"
-device "cxl-type3,bus=rp0,memdev=cxl-mem1,id=cxl-pmem0"
Note: Dropped PCDIMM info interfaces for now. They can be added if
appropriate at a later date.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-component-utils.c | 18 ++++
hw/cxl/cxl-mailbox-utils.c | 46 ++++++++++
hw/mem/Kconfig | 5 ++
hw/mem/cxl_type3.c | 162 +++++++++++++++++++++++++++++++++++
hw/mem/meson.build | 1 +
include/hw/cxl/cxl_device.h | 15 ++++
include/hw/cxl/cxl_pci.h | 21 +++++
include/hw/pci/pci_ids.h | 1 +
8 files changed, 269 insertions(+)
diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
index 9457a1b029..afc97b17c2 100644
--- a/hw/cxl/cxl-component-utils.c
+++ b/hw/cxl/cxl-component-utils.c
@@ -252,6 +252,24 @@ void cxl_component_create_dvsec(CXLComponentState *cxl,
/* Configure write masks */
switch (type) {
case PCIE_CXL_DEVICE_DVSEC:
+ /* Cntrl RW Lock - so needs explicit blocking when lock is set */
+ wmask[offset + offsetof(CXLDVSECDevice, ctrl)] = 0xFD;
+ wmask[offset + offsetof(CXLDVSECDevice, ctrl) + 1] = 0x4F;
+ /* Status is RW1CS */
+ wmask[offset + offsetof(CXLDVSECDevice, ctrl2)] = 0x0F;
+ /* Lock is RW Once */
+ wmask[offset + offsetof(CXLDVSECDevice, lock)] = 0x01;
+ /* range1/2_base_high/low is RW Lock */
+ wmask[offset + offsetof(CXLDVSECDevice, range1_base_hi)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range1_base_hi) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range1_base_hi) + 2] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range1_base_hi) + 3] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range1_base_lo) + 3] = 0xF0;
+ wmask[offset + offsetof(CXLDVSECDevice, range2_base_hi)] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range2_base_hi) + 1] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range2_base_hi) + 2] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range2_base_hi) + 3] = 0xFF;
+ wmask[offset + offsetof(CXLDVSECDevice, range2_base_lo) + 3] = 0xF0;
break;
case NON_CXL_FUNCTION_MAP_DVSEC:
break; /* Not yet implemented */
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index db473135c7..4ae0561dfc 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -50,6 +50,8 @@ enum {
LOGS = 0x04,
#define GET_SUPPORTED 0x0
#define GET_LOG 0x1
+ IDENTIFY = 0x40,
+ #define MEMORY_DEVICE 0x0
};
/* 8.2.8.4.5.1 Command Return Codes */
@@ -214,6 +216,48 @@ static ret_code cmd_logs_get_log(struct cxl_cmd *cmd,
return CXL_MBOX_SUCCESS;
}
+/* 8.2.9.5.1.1 */
+static ret_code cmd_identify_memory_device(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct {
+ char fw_revision[0x10];
+ uint64_t total_capacity;
+ uint64_t volatile_capacity;
+ uint64_t persistent_capacity;
+ uint64_t partition_align;
+ uint16_t info_event_log_size;
+ uint16_t warning_event_log_size;
+ uint16_t failure_event_log_size;
+ uint16_t fatal_event_log_size;
+ uint32_t lsa_size;
+ uint8_t poison_list_max_mer[3];
+ uint16_t inject_poison_limit;
+ uint8_t poison_caps;
+ uint8_t qos_telemetry_caps;
+ } QEMU_PACKED *id;
+ QEMU_BUILD_BUG_ON(sizeof(*id) != 0x43);
+
+ uint64_t size = cxl_dstate->pmem_size;
+
+ if (!QEMU_IS_ALIGNED(size, 256 << 20)) {
+ return CXL_MBOX_INTERNAL_ERROR;
+ }
+
+ id = (void *)cmd->payload;
+ memset(id, 0, sizeof(*id));
+
+ /* PMEM only */
+ snprintf(id->fw_revision, 0x10, "BWFW VERSION %02d", 0);
+
+ id->total_capacity = size / (256 << 20);
+ id->persistent_capacity = size / (256 << 20);
+
+ *len = sizeof(*id);
+ return CXL_MBOX_SUCCESS;
+}
+
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
#define IMMEDIATE_POLICY_CHANGE (1 << 3)
#define IMMEDIATE_LOG_CHANGE (1 << 4)
@@ -231,6 +275,8 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
[TIMESTAMP][SET] = { "TIMESTAMP_SET", cmd_timestamp_set, 8, IMMEDIATE_POLICY_CHANGE },
[LOGS][GET_SUPPORTED] = { "LOGS_GET_SUPPORTED", cmd_logs_get_supported, 0, 0 },
[LOGS][GET_LOG] = { "LOGS_GET_LOG", cmd_logs_get_log, 0x18, 0 },
+ [IDENTIFY][MEMORY_DEVICE] = { "IDENTIFY_MEMORY_DEVICE",
+ cmd_identify_memory_device, 0, 0 },
};
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
diff --git a/hw/mem/Kconfig b/hw/mem/Kconfig
index 03dbb3c7df..73c5ae8ad9 100644
--- a/hw/mem/Kconfig
+++ b/hw/mem/Kconfig
@@ -11,3 +11,8 @@ config NVDIMM
config SPARSE_MEM
bool
+
+config CXL_MEM_DEVICE
+ bool
+ default y if CXL
+ select MEM_DEVICE
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
new file mode 100644
index 0000000000..290c088dd6
--- /dev/null
+++ b/hw/mem/cxl_type3.c
@@ -0,0 +1,162 @@
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qemu/error-report.h"
+#include "hw/mem/memory-device.h"
+#include "hw/mem/pc-dimm.h"
+#include "hw/pci/pci.h"
+#include "hw/qdev-properties.h"
+#include "qapi/error.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/range.h"
+#include "qemu/rcu.h"
+#include "sysemu/hostmem.h"
+#include "hw/cxl/cxl.h"
+
+static void build_dvsecs(CXLType3Dev *ct3d)
+{
+ CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
+ uint8_t *dvsec;
+
+ dvsec = (uint8_t *)&(CXLDVSECDevice){
+ .cap = 0x1e,
+ .ctrl = 0x2,
+ .status2 = 0x2,
+ .range1_size_hi = ct3d->hostmem->size >> 32,
+ .range1_size_lo = (2 << 5) | (2 << 2) | 0x3 |
+ (ct3d->hostmem->size & 0xF0000000),
+ .range1_base_hi = 0,
+ .range1_base_lo = 0,
+ };
+ cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE,
+ PCIE_CXL_DEVICE_DVSEC_LENGTH,
+ PCIE_CXL_DEVICE_DVSEC,
+ PCIE_CXL2_DEVICE_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){
+ .rsvd = 0,
+ .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX,
+ .reg0_base_hi = 0,
+ .reg1_base_lo = RBI_CXL_DEVICE_REG | CXL_DEVICE_REG_BAR_IDX,
+ .reg1_base_hi = 0,
+ };
+ cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE,
+ REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC,
+ REG_LOC_DVSEC_REVID, dvsec);
+ dvsec = (uint8_t *)&(CXLDVSECDeviceGPF){
+ .phase2_duration = 0x603, /* 3 seconds */
+ .phase2_power = 0x33, /* 0x33 miliwatts */
+ };
+ cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE,
+ GPF_DEVICE_DVSEC_LENGTH, GPF_PORT_DVSEC,
+ GPF_DEVICE_DVSEC_REVID, dvsec);
+}
+
+static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
+{
+ MemoryRegion *mr;
+
+ if (!ct3d->hostmem) {
+ error_setg(errp, "memdev property must be set");
+ return false;
+ }
+
+ mr = host_memory_backend_get_memory(ct3d->hostmem);
+ if (!mr) {
+ error_setg(errp, "memdev property must be set");
+ return false;
+ }
+ memory_region_set_nonvolatile(mr, true);
+ memory_region_set_enabled(mr, true);
+ host_memory_backend_set_mapped(ct3d->hostmem, true);
+ ct3d->cxl_dstate.pmem_size = ct3d->hostmem->size;
+
+ return true;
+}
+
+static void ct3_realize(PCIDevice *pci_dev, Error **errp)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(pci_dev);
+ CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
+ ComponentRegisters *regs = &cxl_cstate->crb;
+ MemoryRegion *mr = ®s->component_registers;
+ uint8_t *pci_conf = pci_dev->config;
+
+ if (!cxl_setup_memory(ct3d, errp)) {
+ return;
+ }
+
+ pci_config_set_prog_interface(pci_conf, 0x10);
+ pci_config_set_class(pci_conf, PCI_CLASS_MEMORY_CXL);
+
+ pcie_endpoint_cap_init(pci_dev, 0x80);
+ cxl_cstate->dvsec_offset = 0x100;
+
+ ct3d->cxl_cstate.pdev = pci_dev;
+ build_dvsecs(ct3d);
+
+ cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
+ TYPE_CXL_TYPE3);
+
+ pci_register_bar(
+ pci_dev, CXL_COMPONENT_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64, mr);
+
+ cxl_device_register_block_init(OBJECT(pci_dev), &ct3d->cxl_dstate);
+ pci_register_bar(pci_dev, CXL_DEVICE_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64,
+ &ct3d->cxl_dstate.device_registers);
+}
+
+static void ct3d_reset(DeviceState *dev)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(dev);
+ uint32_t *reg_state = ct3d->cxl_cstate.crb.cache_mem_registers;
+ uint32_t *write_msk = ct3d->cxl_cstate.crb.cache_mem_regs_write_mask;
+
+ cxl_component_register_init_common(reg_state, write_msk, CXL2_TYPE3_DEVICE);
+ cxl_device_register_init_common(&ct3d->cxl_dstate);
+}
+
+static Property ct3_props[] = {
+ DEFINE_PROP_LINK("memdev", CXLType3Dev, hostmem, TYPE_MEMORY_BACKEND,
+ HostMemoryBackend *),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ct3_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ PCIDeviceClass *pc = PCI_DEVICE_CLASS(oc);
+
+ pc->realize = ct3_realize;
+ pc->class_id = PCI_CLASS_STORAGE_EXPRESS;
+ pc->vendor_id = PCI_VENDOR_ID_INTEL;
+ pc->device_id = 0xd93; /* LVF for now */
+ pc->revision = 1;
+
+ set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
+ dc->desc = "CXL PMEM Device (Type 3)";
+ dc->reset = ct3d_reset;
+ device_class_set_props(dc, ct3_props);
+}
+
+static const TypeInfo ct3d_info = {
+ .name = TYPE_CXL_TYPE3,
+ .parent = TYPE_PCI_DEVICE,
+ .class_init = ct3_class_init,
+ .instance_size = sizeof(CXLType3Dev),
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_CXL_DEVICE },
+ { INTERFACE_PCIE_DEVICE },
+ {}
+ },
+};
+
+static void ct3d_registers(void)
+{
+ type_register_static(&ct3d_info);
+}
+
+type_init(ct3d_registers);
diff --git a/hw/mem/meson.build b/hw/mem/meson.build
index 82f86d117e..609b2b36fc 100644
--- a/hw/mem/meson.build
+++ b/hw/mem/meson.build
@@ -3,6 +3,7 @@ mem_ss.add(files('memory-device.c'))
mem_ss.add(when: 'CONFIG_DIMM', if_true: files('pc-dimm.c'))
mem_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_mc.c'))
mem_ss.add(when: 'CONFIG_NVDIMM', if_true: files('nvdimm.c'))
+mem_ss.add(when: 'CONFIG_CXL_MEM_DEVICE', if_true: files('cxl_type3.c'))
softmmu_ss.add_all(when: 'CONFIG_MEM_DEVICE', if_true: mem_ss)
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 797a22ddb4..d8da2c7b68 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -230,4 +230,19 @@ REG64(CXL_MEM_DEV_STS, 0)
FIELD(CXL_MEM_DEV_STS, MBOX_READY, 4, 1)
FIELD(CXL_MEM_DEV_STS, RESET_NEEDED, 5, 3)
+struct CXLType3Dev {
+ /* Private */
+ PCIDevice parent_obj;
+
+ /* Properties */
+ HostMemoryBackend *hostmem;
+
+ /* State */
+ CXLComponentState cxl_cstate;
+ CXLDeviceState cxl_dstate;
+};
+
+#define TYPE_CXL_TYPE3 "cxl-type3"
+OBJECT_DECLARE_SIMPLE_TYPE(CXLType3Dev, CXL_TYPE3)
+
#endif
diff --git a/include/hw/cxl/cxl_pci.h b/include/hw/cxl/cxl_pci.h
index 3f7e44daac..01cf002096 100644
--- a/include/hw/cxl/cxl_pci.h
+++ b/include/hw/cxl/cxl_pci.h
@@ -67,6 +67,27 @@ QEMU_BUILD_BUG_ON(sizeof(DVSECHeader) != 10);
* CXL 2.0 Downstream Port: 3, 4, 7, 8
*/
+/* CXL 2.0 - 8.1.3 (ID 0001) */
+typedef struct CXLDVSECDevice {
+ DVSECHeader hdr;
+ uint16_t cap;
+ uint16_t ctrl;
+ uint16_t status;
+ uint16_t ctrl2;
+ uint16_t status2;
+ uint16_t lock;
+ uint16_t cap2;
+ uint32_t range1_size_hi;
+ uint32_t range1_size_lo;
+ uint32_t range1_base_hi;
+ uint32_t range1_base_lo;
+ uint32_t range2_size_hi;
+ uint32_t range2_size_lo;
+ uint32_t range2_base_hi;
+ uint32_t range2_base_lo;
+} CXLDVSECDevice;
+QEMU_BUILD_BUG_ON(sizeof(CXLDVSECDevice) != 0x38);
+
/* CXL 2.0 - 8.1.5 (ID 0003) */
typedef struct CXLDVSECPortExtensions {
DVSECHeader hdr;
diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
index 11abe22d46..898083b86f 100644
--- a/include/hw/pci/pci_ids.h
+++ b/include/hw/pci/pci_ids.h
@@ -53,6 +53,7 @@
#define PCI_BASE_CLASS_MEMORY 0x05
#define PCI_CLASS_MEMORY_RAM 0x0500
#define PCI_CLASS_MEMORY_FLASH 0x0501
+#define PCI_CLASS_MEMORY_CXL 0x0502
#define PCI_CLASS_MEMORY_OTHER 0x0580
#define PCI_BASE_CLASS_BRIDGE 0x06
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* Re: [PATCH v10 17/45] hw/cxl/device: Add a memory device (8.2.8.5)
2022-04-29 14:40 ` Jonathan Cameron via
(?)
@ 2023-09-13 12:20 ` Philippe Mathieu-Daudé
-1 siblings, 0 replies; 100+ messages in thread
From: Philippe Mathieu-Daudé @ 2023-09-13 12:20 UTC (permalink / raw)
To: Jonathan Cameron, linuxarm, qemu-devel, alex.bennee,
Marcel Apfelbaum, Michael S . Tsirkin, Igor Mammedov,
Markus Armbruster, Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield,
Thomas Huth
Hi Ben, Jonathan,
On 29/4/22 16:40, Jonathan Cameron via wrote:
> From: Ben Widawsky <ben.widawsky@intel.com>
>
> A CXL memory device (AKA Type 3) is a CXL component that contains some
> combination of volatile and persistent memory. It also implements the
> previously defined mailbox interface as well as the memory device
> firmware interface.
>
> Although the memory device is configured like a normal PCIe device, the
> memory traffic is on an entirely separate bus conceptually (using the
> same physical wires as PCIe, but different protocol).
>
> Once the CXL topology is fully configure and address decoders committed,
> the guest physical address for the memory device is part of a larger
> window which is owned by the platform. The creation of these windows
> is later in this series.
>
> The following example will create a 256M device in a 512M window:
> -object "memory-backend-file,id=cxl-mem1,share,mem-path=cxl-type3,size=512M"
> -device "cxl-type3,bus=rp0,memdev=cxl-mem1,id=cxl-pmem0"
>
> Note: Dropped PCDIMM info interfaces for now. They can be added if
> appropriate at a later date.
>
> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
> hw/cxl/cxl-component-utils.c | 18 ++++
> hw/cxl/cxl-mailbox-utils.c | 46 ++++++++++
> hw/mem/Kconfig | 5 ++
> hw/mem/cxl_type3.c | 162 +++++++++++++++++++++++++++++++++++
> hw/mem/meson.build | 1 +
> include/hw/cxl/cxl_device.h | 15 ++++
> include/hw/cxl/cxl_pci.h | 21 +++++
> include/hw/pci/pci_ids.h | 1 +
> 8 files changed, 269 insertions(+)
> diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> new file mode 100644
> index 0000000000..290c088dd6
> --- /dev/null
> +++ b/hw/mem/cxl_type3.c
> @@ -0,0 +1,162 @@
This file lacks a license, do you mind adding one?
Thanks!
> +#include "qemu/osdep.h"
> +#include "qemu/units.h"
> +#include "qemu/error-report.h"
> +#include "hw/mem/memory-device.h"
> +#include "hw/mem/pc-dimm.h"
> +#include "hw/pci/pci.h"
> +#include "hw/qdev-properties.h"
> +#include "qapi/error.h"
> +#include "qemu/log.h"
> +#include "qemu/module.h"
> +#include "qemu/range.h"
> +#include "qemu/rcu.h"
> +#include "sysemu/hostmem.h"
> +#include "hw/cxl/cxl.h"
> +
> +static void build_dvsecs(CXLType3Dev *ct3d)
> +{
> + CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
> + uint8_t *dvsec;
> +
> + dvsec = (uint8_t *)&(CXLDVSECDevice){
> + .cap = 0x1e,
> + .ctrl = 0x2,
> + .status2 = 0x2,
> + .range1_size_hi = ct3d->hostmem->size >> 32,
> + .range1_size_lo = (2 << 5) | (2 << 2) | 0x3 |
> + (ct3d->hostmem->size & 0xF0000000),
> + .range1_base_hi = 0,
> + .range1_base_lo = 0,
> + };
> + cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE,
> + PCIE_CXL_DEVICE_DVSEC_LENGTH,
> + PCIE_CXL_DEVICE_DVSEC,
> + PCIE_CXL2_DEVICE_DVSEC_REVID, dvsec);
> +
> + dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){
> + .rsvd = 0,
> + .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX,
> + .reg0_base_hi = 0,
> + .reg1_base_lo = RBI_CXL_DEVICE_REG | CXL_DEVICE_REG_BAR_IDX,
> + .reg1_base_hi = 0,
> + };
> + cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE,
> + REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC,
> + REG_LOC_DVSEC_REVID, dvsec);
> + dvsec = (uint8_t *)&(CXLDVSECDeviceGPF){
> + .phase2_duration = 0x603, /* 3 seconds */
> + .phase2_power = 0x33, /* 0x33 miliwatts */
> + };
> + cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE,
> + GPF_DEVICE_DVSEC_LENGTH, GPF_PORT_DVSEC,
> + GPF_DEVICE_DVSEC_REVID, dvsec);
> +}
> +
> +static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
> +{
> + MemoryRegion *mr;
> +
> + if (!ct3d->hostmem) {
> + error_setg(errp, "memdev property must be set");
> + return false;
> + }
> +
> + mr = host_memory_backend_get_memory(ct3d->hostmem);
> + if (!mr) {
> + error_setg(errp, "memdev property must be set");
> + return false;
> + }
> + memory_region_set_nonvolatile(mr, true);
> + memory_region_set_enabled(mr, true);
> + host_memory_backend_set_mapped(ct3d->hostmem, true);
> + ct3d->cxl_dstate.pmem_size = ct3d->hostmem->size;
> +
> + return true;
> +}
> +
> +static void ct3_realize(PCIDevice *pci_dev, Error **errp)
> +{
> + CXLType3Dev *ct3d = CXL_TYPE3(pci_dev);
> + CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
> + ComponentRegisters *regs = &cxl_cstate->crb;
> + MemoryRegion *mr = ®s->component_registers;
> + uint8_t *pci_conf = pci_dev->config;
> +
> + if (!cxl_setup_memory(ct3d, errp)) {
> + return;
> + }
> +
> + pci_config_set_prog_interface(pci_conf, 0x10);
> + pci_config_set_class(pci_conf, PCI_CLASS_MEMORY_CXL);
> +
> + pcie_endpoint_cap_init(pci_dev, 0x80);
> + cxl_cstate->dvsec_offset = 0x100;
> +
> + ct3d->cxl_cstate.pdev = pci_dev;
> + build_dvsecs(ct3d);
> +
> + cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
> + TYPE_CXL_TYPE3);
> +
> + pci_register_bar(
> + pci_dev, CXL_COMPONENT_REG_BAR_IDX,
> + PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64, mr);
> +
> + cxl_device_register_block_init(OBJECT(pci_dev), &ct3d->cxl_dstate);
> + pci_register_bar(pci_dev, CXL_DEVICE_REG_BAR_IDX,
> + PCI_BASE_ADDRESS_SPACE_MEMORY |
> + PCI_BASE_ADDRESS_MEM_TYPE_64,
> + &ct3d->cxl_dstate.device_registers);
> +}
> +
> +static void ct3d_reset(DeviceState *dev)
> +{
> + CXLType3Dev *ct3d = CXL_TYPE3(dev);
> + uint32_t *reg_state = ct3d->cxl_cstate.crb.cache_mem_registers;
> + uint32_t *write_msk = ct3d->cxl_cstate.crb.cache_mem_regs_write_mask;
> +
> + cxl_component_register_init_common(reg_state, write_msk, CXL2_TYPE3_DEVICE);
> + cxl_device_register_init_common(&ct3d->cxl_dstate);
> +}
> +
> +static Property ct3_props[] = {
> + DEFINE_PROP_LINK("memdev", CXLType3Dev, hostmem, TYPE_MEMORY_BACKEND,
> + HostMemoryBackend *),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void ct3_class_init(ObjectClass *oc, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(oc);
> + PCIDeviceClass *pc = PCI_DEVICE_CLASS(oc);
> +
> + pc->realize = ct3_realize;
> + pc->class_id = PCI_CLASS_STORAGE_EXPRESS;
> + pc->vendor_id = PCI_VENDOR_ID_INTEL;
> + pc->device_id = 0xd93; /* LVF for now */
> + pc->revision = 1;
> +
> + set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
> + dc->desc = "CXL PMEM Device (Type 3)";
> + dc->reset = ct3d_reset;
> + device_class_set_props(dc, ct3_props);
> +}
> +
> +static const TypeInfo ct3d_info = {
> + .name = TYPE_CXL_TYPE3,
> + .parent = TYPE_PCI_DEVICE,
> + .class_init = ct3_class_init,
> + .instance_size = sizeof(CXLType3Dev),
> + .interfaces = (InterfaceInfo[]) {
> + { INTERFACE_CXL_DEVICE },
> + { INTERFACE_PCIE_DEVICE },
> + {}
> + },
> +};
> +
> +static void ct3d_registers(void)
> +{
> + type_register_static(&ct3d_info);
> +}
> +
> +type_init(ct3d_registers);
^ permalink raw reply [flat|nested] 100+ messages in thread
* [PATCH v10 18/45] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
A device's volatile and persistent memory are known Host Defined Memory
(HDM) regions. The mechanism by which the device is programmed to claim
the addresses associated with those regions is through dedicated logic
known as the HDM decoder. In order to allow the OS to properly program
the HDMs, the HDM decoders must be modeled.
There are two ways the HDM decoders can be implemented, the legacy
mechanism is through the PCIe DVSEC programming from CXL 1.1 (8.1.3.8),
and MMIO is found in 8.2.5.12 of the spec. For now, 8.1.3.8 is not
implemented.
Much of CXL device logic is implemented in cxl-utils. The HDM decoder
however is implemented directly by the device implementation.
Whilst the implementation currently does no validity checks on the
encoder set up, future work will add sanity checking specific to
the type of cxl component.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/mem/cxl_type3.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 290c088dd6..318b6f9fbc 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -52,6 +52,48 @@ static void build_dvsecs(CXLType3Dev *ct3d)
GPF_DEVICE_DVSEC_REVID, dvsec);
}
+static void hdm_decoder_commit(CXLType3Dev *ct3d, int which)
+{
+ ComponentRegisters *cregs = &ct3d->cxl_cstate.crb;
+ uint32_t *cache_mem = cregs->cache_mem_registers;
+
+ assert(which == 0);
+
+ /* TODO: Sanity checks that the decoder is possible */
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, ERR, 0);
+
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
+}
+
+static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size)
+{
+ CXLComponentState *cxl_cstate = opaque;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ CXLType3Dev *ct3d = container_of(cxl_cstate, CXLType3Dev, cxl_cstate);
+ uint32_t *cache_mem = cregs->cache_mem_registers;
+ bool should_commit = false;
+ int which_hdm = -1;
+
+ assert(size == 4);
+ g_assert(offset < CXL2_COMPONENT_CM_REGION_SIZE);
+
+ switch (offset) {
+ case A_CXL_HDM_DECODER0_CTRL:
+ should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
+ which_hdm = 0;
+ break;
+ default:
+ break;
+ }
+
+ stl_le_p((uint8_t *)cache_mem + offset, value);
+ if (should_commit) {
+ hdm_decoder_commit(ct3d, which_hdm);
+ }
+}
+
static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
{
MemoryRegion *mr;
@@ -95,6 +137,9 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
ct3d->cxl_cstate.pdev = pci_dev;
build_dvsecs(ct3d);
+ regs->special_ops = g_new0(MemoryRegionOps, 1);
+ regs->special_ops->write = ct3d_reg_write;
+
cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
TYPE_CXL_TYPE3);
@@ -109,6 +154,15 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
&ct3d->cxl_dstate.device_registers);
}
+static void ct3_exit(PCIDevice *pci_dev)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(pci_dev);
+ CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
+ ComponentRegisters *regs = &cxl_cstate->crb;
+
+ g_free(regs->special_ops);
+}
+
static void ct3d_reset(DeviceState *dev)
{
CXLType3Dev *ct3d = CXL_TYPE3(dev);
@@ -131,6 +185,7 @@ static void ct3_class_init(ObjectClass *oc, void *data)
PCIDeviceClass *pc = PCI_DEVICE_CLASS(oc);
pc->realize = ct3_realize;
+ pc->exit = ct3_exit;
pc->class_id = PCI_CLASS_STORAGE_EXPRESS;
pc->vendor_id = PCI_VENDOR_ID_INTEL;
pc->device_id = 0xd93; /* LVF for now */
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 18/45] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
A device's volatile and persistent memory are known Host Defined Memory
(HDM) regions. The mechanism by which the device is programmed to claim
the addresses associated with those regions is through dedicated logic
known as the HDM decoder. In order to allow the OS to properly program
the HDMs, the HDM decoders must be modeled.
There are two ways the HDM decoders can be implemented, the legacy
mechanism is through the PCIe DVSEC programming from CXL 1.1 (8.1.3.8),
and MMIO is found in 8.2.5.12 of the spec. For now, 8.1.3.8 is not
implemented.
Much of CXL device logic is implemented in cxl-utils. The HDM decoder
however is implemented directly by the device implementation.
Whilst the implementation currently does no validity checks on the
encoder set up, future work will add sanity checking specific to
the type of cxl component.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/mem/cxl_type3.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 290c088dd6..318b6f9fbc 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -52,6 +52,48 @@ static void build_dvsecs(CXLType3Dev *ct3d)
GPF_DEVICE_DVSEC_REVID, dvsec);
}
+static void hdm_decoder_commit(CXLType3Dev *ct3d, int which)
+{
+ ComponentRegisters *cregs = &ct3d->cxl_cstate.crb;
+ uint32_t *cache_mem = cregs->cache_mem_registers;
+
+ assert(which == 0);
+
+ /* TODO: Sanity checks that the decoder is possible */
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, ERR, 0);
+
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
+}
+
+static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size)
+{
+ CXLComponentState *cxl_cstate = opaque;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ CXLType3Dev *ct3d = container_of(cxl_cstate, CXLType3Dev, cxl_cstate);
+ uint32_t *cache_mem = cregs->cache_mem_registers;
+ bool should_commit = false;
+ int which_hdm = -1;
+
+ assert(size == 4);
+ g_assert(offset < CXL2_COMPONENT_CM_REGION_SIZE);
+
+ switch (offset) {
+ case A_CXL_HDM_DECODER0_CTRL:
+ should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
+ which_hdm = 0;
+ break;
+ default:
+ break;
+ }
+
+ stl_le_p((uint8_t *)cache_mem + offset, value);
+ if (should_commit) {
+ hdm_decoder_commit(ct3d, which_hdm);
+ }
+}
+
static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
{
MemoryRegion *mr;
@@ -95,6 +137,9 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
ct3d->cxl_cstate.pdev = pci_dev;
build_dvsecs(ct3d);
+ regs->special_ops = g_new0(MemoryRegionOps, 1);
+ regs->special_ops->write = ct3d_reg_write;
+
cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
TYPE_CXL_TYPE3);
@@ -109,6 +154,15 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
&ct3d->cxl_dstate.device_registers);
}
+static void ct3_exit(PCIDevice *pci_dev)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(pci_dev);
+ CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
+ ComponentRegisters *regs = &cxl_cstate->crb;
+
+ g_free(regs->special_ops);
+}
+
static void ct3d_reset(DeviceState *dev)
{
CXLType3Dev *ct3d = CXL_TYPE3(dev);
@@ -131,6 +185,7 @@ static void ct3_class_init(ObjectClass *oc, void *data)
PCIDeviceClass *pc = PCI_DEVICE_CLASS(oc);
pc->realize = ct3_realize;
+ pc->exit = ct3_exit;
pc->class_id = PCI_CLASS_STORAGE_EXPRESS;
pc->vendor_id = PCI_VENDOR_ID_INTEL;
pc->device_id = 0xd93; /* LVF for now */
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 19/45] hw/cxl/device: Add some trivial commands
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
GET_FW_INFO and GET_PARTITION_INFO, for this emulation, is equivalent to
info already returned in the IDENTIFY command. To have a more robust
implementation, add those.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-mailbox-utils.c | 69 ++++++++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 4ae0561dfc..c8188d7087 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -10,6 +10,7 @@
#include "qemu/osdep.h"
#include "hw/cxl/cxl.h"
#include "hw/pci/pci.h"
+#include "qemu/cutils.h"
#include "qemu/log.h"
#include "qemu/uuid.h"
@@ -44,6 +45,8 @@ enum {
#define CLEAR_RECORDS 0x1
#define GET_INTERRUPT_POLICY 0x2
#define SET_INTERRUPT_POLICY 0x3
+ FIRMWARE_UPDATE = 0x02,
+ #define GET_INFO 0x0
TIMESTAMP = 0x03,
#define GET 0x0
#define SET 0x1
@@ -52,6 +55,8 @@ enum {
#define GET_LOG 0x1
IDENTIFY = 0x40,
#define MEMORY_DEVICE 0x0
+ CCLS = 0x41,
+ #define GET_PARTITION_INFO 0x0
};
/* 8.2.8.4.5.1 Command Return Codes */
@@ -114,6 +119,39 @@ DEFINE_MAILBOX_HANDLER_NOP(events_clear_records);
DEFINE_MAILBOX_HANDLER_ZEROED(events_get_interrupt_policy, 4);
DEFINE_MAILBOX_HANDLER_NOP(events_set_interrupt_policy);
+/* 8.2.9.2.1 */
+static ret_code cmd_firmware_update_get_info(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct {
+ uint8_t slots_supported;
+ uint8_t slot_info;
+ uint8_t caps;
+ uint8_t rsvd[0xd];
+ char fw_rev1[0x10];
+ char fw_rev2[0x10];
+ char fw_rev3[0x10];
+ char fw_rev4[0x10];
+ } QEMU_PACKED *fw_info;
+ QEMU_BUILD_BUG_ON(sizeof(*fw_info) != 0x50);
+
+ if (cxl_dstate->pmem_size < (256 << 20)) {
+ return CXL_MBOX_INTERNAL_ERROR;
+ }
+
+ fw_info = (void *)cmd->payload;
+ memset(fw_info, 0, sizeof(*fw_info));
+
+ fw_info->slots_supported = 2;
+ fw_info->slot_info = BIT(0) | BIT(3);
+ fw_info->caps = 0;
+ pstrcpy(fw_info->fw_rev1, sizeof(fw_info->fw_rev1), "BWFW VERSION 0");
+
+ *len = sizeof(*fw_info);
+ return CXL_MBOX_SUCCESS;
+}
+
/* 8.2.9.3.1 */
static ret_code cmd_timestamp_get(struct cxl_cmd *cmd,
CXLDeviceState *cxl_dstate,
@@ -258,6 +296,33 @@ static ret_code cmd_identify_memory_device(struct cxl_cmd *cmd,
return CXL_MBOX_SUCCESS;
}
+static ret_code cmd_ccls_get_partition_info(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct {
+ uint64_t active_vmem;
+ uint64_t active_pmem;
+ uint64_t next_vmem;
+ uint64_t next_pmem;
+ } QEMU_PACKED *part_info = (void *)cmd->payload;
+ QEMU_BUILD_BUG_ON(sizeof(*part_info) != 0x20);
+ uint64_t size = cxl_dstate->pmem_size;
+
+ if (!QEMU_IS_ALIGNED(size, 256 << 20)) {
+ return CXL_MBOX_INTERNAL_ERROR;
+ }
+
+ /* PMEM only */
+ part_info->active_vmem = 0;
+ part_info->next_vmem = 0;
+ part_info->active_pmem = size / (256 << 20);
+ part_info->next_pmem = 0;
+
+ *len = sizeof(*part_info);
+ return CXL_MBOX_SUCCESS;
+}
+
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
#define IMMEDIATE_POLICY_CHANGE (1 << 3)
#define IMMEDIATE_LOG_CHANGE (1 << 4)
@@ -271,12 +336,16 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
cmd_events_get_interrupt_policy, 0, 0 },
[EVENTS][SET_INTERRUPT_POLICY] = { "EVENTS_SET_INTERRUPT_POLICY",
cmd_events_set_interrupt_policy, 4, IMMEDIATE_CONFIG_CHANGE },
+ [FIRMWARE_UPDATE][GET_INFO] = { "FIRMWARE_UPDATE_GET_INFO",
+ cmd_firmware_update_get_info, 0, 0 },
[TIMESTAMP][GET] = { "TIMESTAMP_GET", cmd_timestamp_get, 0, 0 },
[TIMESTAMP][SET] = { "TIMESTAMP_SET", cmd_timestamp_set, 8, IMMEDIATE_POLICY_CHANGE },
[LOGS][GET_SUPPORTED] = { "LOGS_GET_SUPPORTED", cmd_logs_get_supported, 0, 0 },
[LOGS][GET_LOG] = { "LOGS_GET_LOG", cmd_logs_get_log, 0x18, 0 },
[IDENTIFY][MEMORY_DEVICE] = { "IDENTIFY_MEMORY_DEVICE",
cmd_identify_memory_device, 0, 0 },
+ [CCLS][GET_PARTITION_INFO] = { "CCLS_GET_PARTITION_INFO",
+ cmd_ccls_get_partition_info, 0, 0 },
};
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 19/45] hw/cxl/device: Add some trivial commands
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
GET_FW_INFO and GET_PARTITION_INFO, for this emulation, is equivalent to
info already returned in the IDENTIFY command. To have a more robust
implementation, add those.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-mailbox-utils.c | 69 ++++++++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 4ae0561dfc..c8188d7087 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -10,6 +10,7 @@
#include "qemu/osdep.h"
#include "hw/cxl/cxl.h"
#include "hw/pci/pci.h"
+#include "qemu/cutils.h"
#include "qemu/log.h"
#include "qemu/uuid.h"
@@ -44,6 +45,8 @@ enum {
#define CLEAR_RECORDS 0x1
#define GET_INTERRUPT_POLICY 0x2
#define SET_INTERRUPT_POLICY 0x3
+ FIRMWARE_UPDATE = 0x02,
+ #define GET_INFO 0x0
TIMESTAMP = 0x03,
#define GET 0x0
#define SET 0x1
@@ -52,6 +55,8 @@ enum {
#define GET_LOG 0x1
IDENTIFY = 0x40,
#define MEMORY_DEVICE 0x0
+ CCLS = 0x41,
+ #define GET_PARTITION_INFO 0x0
};
/* 8.2.8.4.5.1 Command Return Codes */
@@ -114,6 +119,39 @@ DEFINE_MAILBOX_HANDLER_NOP(events_clear_records);
DEFINE_MAILBOX_HANDLER_ZEROED(events_get_interrupt_policy, 4);
DEFINE_MAILBOX_HANDLER_NOP(events_set_interrupt_policy);
+/* 8.2.9.2.1 */
+static ret_code cmd_firmware_update_get_info(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct {
+ uint8_t slots_supported;
+ uint8_t slot_info;
+ uint8_t caps;
+ uint8_t rsvd[0xd];
+ char fw_rev1[0x10];
+ char fw_rev2[0x10];
+ char fw_rev3[0x10];
+ char fw_rev4[0x10];
+ } QEMU_PACKED *fw_info;
+ QEMU_BUILD_BUG_ON(sizeof(*fw_info) != 0x50);
+
+ if (cxl_dstate->pmem_size < (256 << 20)) {
+ return CXL_MBOX_INTERNAL_ERROR;
+ }
+
+ fw_info = (void *)cmd->payload;
+ memset(fw_info, 0, sizeof(*fw_info));
+
+ fw_info->slots_supported = 2;
+ fw_info->slot_info = BIT(0) | BIT(3);
+ fw_info->caps = 0;
+ pstrcpy(fw_info->fw_rev1, sizeof(fw_info->fw_rev1), "BWFW VERSION 0");
+
+ *len = sizeof(*fw_info);
+ return CXL_MBOX_SUCCESS;
+}
+
/* 8.2.9.3.1 */
static ret_code cmd_timestamp_get(struct cxl_cmd *cmd,
CXLDeviceState *cxl_dstate,
@@ -258,6 +296,33 @@ static ret_code cmd_identify_memory_device(struct cxl_cmd *cmd,
return CXL_MBOX_SUCCESS;
}
+static ret_code cmd_ccls_get_partition_info(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct {
+ uint64_t active_vmem;
+ uint64_t active_pmem;
+ uint64_t next_vmem;
+ uint64_t next_pmem;
+ } QEMU_PACKED *part_info = (void *)cmd->payload;
+ QEMU_BUILD_BUG_ON(sizeof(*part_info) != 0x20);
+ uint64_t size = cxl_dstate->pmem_size;
+
+ if (!QEMU_IS_ALIGNED(size, 256 << 20)) {
+ return CXL_MBOX_INTERNAL_ERROR;
+ }
+
+ /* PMEM only */
+ part_info->active_vmem = 0;
+ part_info->next_vmem = 0;
+ part_info->active_pmem = size / (256 << 20);
+ part_info->next_pmem = 0;
+
+ *len = sizeof(*part_info);
+ return CXL_MBOX_SUCCESS;
+}
+
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
#define IMMEDIATE_POLICY_CHANGE (1 << 3)
#define IMMEDIATE_LOG_CHANGE (1 << 4)
@@ -271,12 +336,16 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
cmd_events_get_interrupt_policy, 0, 0 },
[EVENTS][SET_INTERRUPT_POLICY] = { "EVENTS_SET_INTERRUPT_POLICY",
cmd_events_set_interrupt_policy, 4, IMMEDIATE_CONFIG_CHANGE },
+ [FIRMWARE_UPDATE][GET_INFO] = { "FIRMWARE_UPDATE_GET_INFO",
+ cmd_firmware_update_get_info, 0, 0 },
[TIMESTAMP][GET] = { "TIMESTAMP_GET", cmd_timestamp_get, 0, 0 },
[TIMESTAMP][SET] = { "TIMESTAMP_SET", cmd_timestamp_set, 8, IMMEDIATE_POLICY_CHANGE },
[LOGS][GET_SUPPORTED] = { "LOGS_GET_SUPPORTED", cmd_logs_get_supported, 0, 0 },
[LOGS][GET_LOG] = { "LOGS_GET_LOG", cmd_logs_get_log, 0x18, 0 },
[IDENTIFY][MEMORY_DEVICE] = { "IDENTIFY_MEMORY_DEVICE",
cmd_identify_memory_device, 0, 0 },
+ [CCLS][GET_PARTITION_INFO] = { "CCLS_GET_PARTITION_INFO",
+ cmd_ccls_get_partition_info, 0, 0 },
};
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 20/45] hw/cxl/device: Plumb real Label Storage Area (LSA) sizing
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
This should introduce no change. Subsequent work will make use of this
new class member.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-mailbox-utils.c | 3 +++
hw/mem/cxl_type3.c | 9 +++++++++
include/hw/cxl/cxl_device.h | 11 ++++++++++-
3 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index c8188d7087..492739aef3 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -277,6 +277,8 @@ static ret_code cmd_identify_memory_device(struct cxl_cmd *cmd,
} QEMU_PACKED *id;
QEMU_BUILD_BUG_ON(sizeof(*id) != 0x43);
+ CXLType3Dev *ct3d = container_of(cxl_dstate, CXLType3Dev, cxl_dstate);
+ CXLType3Class *cvc = CXL_TYPE3_GET_CLASS(ct3d);
uint64_t size = cxl_dstate->pmem_size;
if (!QEMU_IS_ALIGNED(size, 256 << 20)) {
@@ -291,6 +293,7 @@ static ret_code cmd_identify_memory_device(struct cxl_cmd *cmd,
id->total_capacity = size / (256 << 20);
id->persistent_capacity = size / (256 << 20);
+ id->lsa_size = cvc->get_lsa_size(ct3d);
*len = sizeof(*id);
return CXL_MBOX_SUCCESS;
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 318b6f9fbc..b5aa1067df 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -179,10 +179,16 @@ static Property ct3_props[] = {
DEFINE_PROP_END_OF_LIST(),
};
+static uint64_t get_lsa_size(CXLType3Dev *ct3d)
+{
+ return 0;
+}
+
static void ct3_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
PCIDeviceClass *pc = PCI_DEVICE_CLASS(oc);
+ CXLType3Class *cvc = CXL_TYPE3_CLASS(oc);
pc->realize = ct3_realize;
pc->exit = ct3_exit;
@@ -195,11 +201,14 @@ static void ct3_class_init(ObjectClass *oc, void *data)
dc->desc = "CXL PMEM Device (Type 3)";
dc->reset = ct3d_reset;
device_class_set_props(dc, ct3_props);
+
+ cvc->get_lsa_size = get_lsa_size;
}
static const TypeInfo ct3d_info = {
.name = TYPE_CXL_TYPE3,
.parent = TYPE_PCI_DEVICE,
+ .class_size = sizeof(struct CXLType3Class),
.class_init = ct3_class_init,
.instance_size = sizeof(CXLType3Dev),
.interfaces = (InterfaceInfo[]) {
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index d8da2c7b68..ea2571a69b 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -236,6 +236,7 @@ struct CXLType3Dev {
/* Properties */
HostMemoryBackend *hostmem;
+ HostMemoryBackend *lsa;
/* State */
CXLComponentState cxl_cstate;
@@ -243,6 +244,14 @@ struct CXLType3Dev {
};
#define TYPE_CXL_TYPE3 "cxl-type3"
-OBJECT_DECLARE_SIMPLE_TYPE(CXLType3Dev, CXL_TYPE3)
+OBJECT_DECLARE_TYPE(CXLType3Dev, CXLType3Class, CXL_TYPE3)
+
+struct CXLType3Class {
+ /* Private */
+ PCIDeviceClass parent_class;
+
+ /* public */
+ uint64_t (*get_lsa_size)(CXLType3Dev *ct3d);
+};
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 20/45] hw/cxl/device: Plumb real Label Storage Area (LSA) sizing
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
This should introduce no change. Subsequent work will make use of this
new class member.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-mailbox-utils.c | 3 +++
hw/mem/cxl_type3.c | 9 +++++++++
include/hw/cxl/cxl_device.h | 11 ++++++++++-
3 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index c8188d7087..492739aef3 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -277,6 +277,8 @@ static ret_code cmd_identify_memory_device(struct cxl_cmd *cmd,
} QEMU_PACKED *id;
QEMU_BUILD_BUG_ON(sizeof(*id) != 0x43);
+ CXLType3Dev *ct3d = container_of(cxl_dstate, CXLType3Dev, cxl_dstate);
+ CXLType3Class *cvc = CXL_TYPE3_GET_CLASS(ct3d);
uint64_t size = cxl_dstate->pmem_size;
if (!QEMU_IS_ALIGNED(size, 256 << 20)) {
@@ -291,6 +293,7 @@ static ret_code cmd_identify_memory_device(struct cxl_cmd *cmd,
id->total_capacity = size / (256 << 20);
id->persistent_capacity = size / (256 << 20);
+ id->lsa_size = cvc->get_lsa_size(ct3d);
*len = sizeof(*id);
return CXL_MBOX_SUCCESS;
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 318b6f9fbc..b5aa1067df 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -179,10 +179,16 @@ static Property ct3_props[] = {
DEFINE_PROP_END_OF_LIST(),
};
+static uint64_t get_lsa_size(CXLType3Dev *ct3d)
+{
+ return 0;
+}
+
static void ct3_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
PCIDeviceClass *pc = PCI_DEVICE_CLASS(oc);
+ CXLType3Class *cvc = CXL_TYPE3_CLASS(oc);
pc->realize = ct3_realize;
pc->exit = ct3_exit;
@@ -195,11 +201,14 @@ static void ct3_class_init(ObjectClass *oc, void *data)
dc->desc = "CXL PMEM Device (Type 3)";
dc->reset = ct3d_reset;
device_class_set_props(dc, ct3_props);
+
+ cvc->get_lsa_size = get_lsa_size;
}
static const TypeInfo ct3d_info = {
.name = TYPE_CXL_TYPE3,
.parent = TYPE_PCI_DEVICE,
+ .class_size = sizeof(struct CXLType3Class),
.class_init = ct3_class_init,
.instance_size = sizeof(CXLType3Dev),
.interfaces = (InterfaceInfo[]) {
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index d8da2c7b68..ea2571a69b 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -236,6 +236,7 @@ struct CXLType3Dev {
/* Properties */
HostMemoryBackend *hostmem;
+ HostMemoryBackend *lsa;
/* State */
CXLComponentState cxl_cstate;
@@ -243,6 +244,14 @@ struct CXLType3Dev {
};
#define TYPE_CXL_TYPE3 "cxl-type3"
-OBJECT_DECLARE_SIMPLE_TYPE(CXLType3Dev, CXL_TYPE3)
+OBJECT_DECLARE_TYPE(CXLType3Dev, CXLType3Class, CXL_TYPE3)
+
+struct CXLType3Class {
+ /* Private */
+ PCIDeviceClass parent_class;
+
+ /* public */
+ uint64_t (*get_lsa_size)(CXLType3Dev *ct3d);
+};
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 21/45] hw/cxl/device: Implement get/set Label Storage Area (LSA)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
Implement get and set handlers for the Label Storage Area
used to hold data describing persistent memory configuration
so that it can be ensured it is seen in the same configuration
after reboot.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-mailbox-utils.c | 60 +++++++++++++++++++++++++++++++++++++
hw/mem/cxl_type3.c | 56 +++++++++++++++++++++++++++++++++-
include/hw/cxl/cxl_device.h | 5 ++++
3 files changed, 120 insertions(+), 1 deletion(-)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 492739aef3..bb66c765a5 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -57,6 +57,8 @@ enum {
#define MEMORY_DEVICE 0x0
CCLS = 0x41,
#define GET_PARTITION_INFO 0x0
+ #define GET_LSA 0x2
+ #define SET_LSA 0x3
};
/* 8.2.8.4.5.1 Command Return Codes */
@@ -326,7 +328,62 @@ static ret_code cmd_ccls_get_partition_info(struct cxl_cmd *cmd,
return CXL_MBOX_SUCCESS;
}
+static ret_code cmd_ccls_get_lsa(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct {
+ uint32_t offset;
+ uint32_t length;
+ } QEMU_PACKED *get_lsa;
+ CXLType3Dev *ct3d = container_of(cxl_dstate, CXLType3Dev, cxl_dstate);
+ CXLType3Class *cvc = CXL_TYPE3_GET_CLASS(ct3d);
+ uint32_t offset, length;
+
+ get_lsa = (void *)cmd->payload;
+ offset = get_lsa->offset;
+ length = get_lsa->length;
+
+ if (offset + length > cvc->get_lsa_size(ct3d)) {
+ *len = 0;
+ return CXL_MBOX_INVALID_INPUT;
+ }
+
+ *len = cvc->get_lsa(ct3d, get_lsa, length, offset);
+ return CXL_MBOX_SUCCESS;
+}
+
+static ret_code cmd_ccls_set_lsa(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct set_lsa_pl {
+ uint32_t offset;
+ uint32_t rsvd;
+ uint8_t data[];
+ } QEMU_PACKED;
+ struct set_lsa_pl *set_lsa_payload = (void *)cmd->payload;
+ CXLType3Dev *ct3d = container_of(cxl_dstate, CXLType3Dev, cxl_dstate);
+ CXLType3Class *cvc = CXL_TYPE3_GET_CLASS(ct3d);
+ const size_t hdr_len = offsetof(struct set_lsa_pl, data);
+ uint16_t plen = *len;
+
+ *len = 0;
+ if (!plen) {
+ return CXL_MBOX_SUCCESS;
+ }
+
+ if (set_lsa_payload->offset + plen > cvc->get_lsa_size(ct3d) + hdr_len) {
+ return CXL_MBOX_INVALID_INPUT;
+ }
+ plen -= hdr_len;
+
+ cvc->set_lsa(ct3d, set_lsa_payload->data, plen, set_lsa_payload->offset);
+ return CXL_MBOX_SUCCESS;
+}
+
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
+#define IMMEDIATE_DATA_CHANGE (1 << 2)
#define IMMEDIATE_POLICY_CHANGE (1 << 3)
#define IMMEDIATE_LOG_CHANGE (1 << 4)
@@ -349,6 +406,9 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
cmd_identify_memory_device, 0, 0 },
[CCLS][GET_PARTITION_INFO] = { "CCLS_GET_PARTITION_INFO",
cmd_ccls_get_partition_info, 0, 0 },
+ [CCLS][GET_LSA] = { "CCLS_GET_LSA", cmd_ccls_get_lsa, 0, 0 },
+ [CCLS][SET_LSA] = { "CCLS_SET_LSA", cmd_ccls_set_lsa,
+ ~0, IMMEDIATE_CONFIG_CHANGE | IMMEDIATE_DATA_CHANGE },
};
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index b5aa1067df..6c6ed9a776 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -8,6 +8,7 @@
#include "qapi/error.h"
#include "qemu/log.h"
#include "qemu/module.h"
+#include "qemu/pmem.h"
#include "qemu/range.h"
#include "qemu/rcu.h"
#include "sysemu/hostmem.h"
@@ -113,6 +114,11 @@ static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
host_memory_backend_set_mapped(ct3d->hostmem, true);
ct3d->cxl_dstate.pmem_size = ct3d->hostmem->size;
+ if (!ct3d->lsa) {
+ error_setg(errp, "lsa property must be set");
+ return false;
+ }
+
return true;
}
@@ -176,12 +182,58 @@ static void ct3d_reset(DeviceState *dev)
static Property ct3_props[] = {
DEFINE_PROP_LINK("memdev", CXLType3Dev, hostmem, TYPE_MEMORY_BACKEND,
HostMemoryBackend *),
+ DEFINE_PROP_LINK("lsa", CXLType3Dev, lsa, TYPE_MEMORY_BACKEND,
+ HostMemoryBackend *),
DEFINE_PROP_END_OF_LIST(),
};
static uint64_t get_lsa_size(CXLType3Dev *ct3d)
{
- return 0;
+ MemoryRegion *mr;
+
+ mr = host_memory_backend_get_memory(ct3d->lsa);
+ return memory_region_size(mr);
+}
+
+static void validate_lsa_access(MemoryRegion *mr, uint64_t size,
+ uint64_t offset)
+{
+ assert(offset + size <= memory_region_size(mr));
+ assert(offset + size > offset);
+}
+
+static uint64_t get_lsa(CXLType3Dev *ct3d, void *buf, uint64_t size,
+ uint64_t offset)
+{
+ MemoryRegion *mr;
+ void *lsa;
+
+ mr = host_memory_backend_get_memory(ct3d->lsa);
+ validate_lsa_access(mr, size, offset);
+
+ lsa = memory_region_get_ram_ptr(mr) + offset;
+ memcpy(buf, lsa, size);
+
+ return size;
+}
+
+static void set_lsa(CXLType3Dev *ct3d, const void *buf, uint64_t size,
+ uint64_t offset)
+{
+ MemoryRegion *mr;
+ void *lsa;
+
+ mr = host_memory_backend_get_memory(ct3d->lsa);
+ validate_lsa_access(mr, size, offset);
+
+ lsa = memory_region_get_ram_ptr(mr) + offset;
+ memcpy(lsa, buf, size);
+ memory_region_set_dirty(mr, offset, size);
+
+ /*
+ * Just like the PMEM, if the guest is not allowed to exit gracefully, label
+ * updates will get lost.
+ */
}
static void ct3_class_init(ObjectClass *oc, void *data)
@@ -203,6 +255,8 @@ static void ct3_class_init(ObjectClass *oc, void *data)
device_class_set_props(dc, ct3_props);
cvc->get_lsa_size = get_lsa_size;
+ cvc->get_lsa = get_lsa;
+ cvc->set_lsa = set_lsa;
}
static const TypeInfo ct3d_info = {
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index ea2571a69b..4285fbda08 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -252,6 +252,11 @@ struct CXLType3Class {
/* public */
uint64_t (*get_lsa_size)(CXLType3Dev *ct3d);
+
+ uint64_t (*get_lsa)(CXLType3Dev *ct3d, void *buf, uint64_t size,
+ uint64_t offset);
+ void (*set_lsa)(CXLType3Dev *ct3d, const void *buf, uint64_t size,
+ uint64_t offset);
};
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 21/45] hw/cxl/device: Implement get/set Label Storage Area (LSA)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
Implement get and set handlers for the Label Storage Area
used to hold data describing persistent memory configuration
so that it can be ensured it is seen in the same configuration
after reboot.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-mailbox-utils.c | 60 +++++++++++++++++++++++++++++++++++++
hw/mem/cxl_type3.c | 56 +++++++++++++++++++++++++++++++++-
include/hw/cxl/cxl_device.h | 5 ++++
3 files changed, 120 insertions(+), 1 deletion(-)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 492739aef3..bb66c765a5 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -57,6 +57,8 @@ enum {
#define MEMORY_DEVICE 0x0
CCLS = 0x41,
#define GET_PARTITION_INFO 0x0
+ #define GET_LSA 0x2
+ #define SET_LSA 0x3
};
/* 8.2.8.4.5.1 Command Return Codes */
@@ -326,7 +328,62 @@ static ret_code cmd_ccls_get_partition_info(struct cxl_cmd *cmd,
return CXL_MBOX_SUCCESS;
}
+static ret_code cmd_ccls_get_lsa(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct {
+ uint32_t offset;
+ uint32_t length;
+ } QEMU_PACKED *get_lsa;
+ CXLType3Dev *ct3d = container_of(cxl_dstate, CXLType3Dev, cxl_dstate);
+ CXLType3Class *cvc = CXL_TYPE3_GET_CLASS(ct3d);
+ uint32_t offset, length;
+
+ get_lsa = (void *)cmd->payload;
+ offset = get_lsa->offset;
+ length = get_lsa->length;
+
+ if (offset + length > cvc->get_lsa_size(ct3d)) {
+ *len = 0;
+ return CXL_MBOX_INVALID_INPUT;
+ }
+
+ *len = cvc->get_lsa(ct3d, get_lsa, length, offset);
+ return CXL_MBOX_SUCCESS;
+}
+
+static ret_code cmd_ccls_set_lsa(struct cxl_cmd *cmd,
+ CXLDeviceState *cxl_dstate,
+ uint16_t *len)
+{
+ struct set_lsa_pl {
+ uint32_t offset;
+ uint32_t rsvd;
+ uint8_t data[];
+ } QEMU_PACKED;
+ struct set_lsa_pl *set_lsa_payload = (void *)cmd->payload;
+ CXLType3Dev *ct3d = container_of(cxl_dstate, CXLType3Dev, cxl_dstate);
+ CXLType3Class *cvc = CXL_TYPE3_GET_CLASS(ct3d);
+ const size_t hdr_len = offsetof(struct set_lsa_pl, data);
+ uint16_t plen = *len;
+
+ *len = 0;
+ if (!plen) {
+ return CXL_MBOX_SUCCESS;
+ }
+
+ if (set_lsa_payload->offset + plen > cvc->get_lsa_size(ct3d) + hdr_len) {
+ return CXL_MBOX_INVALID_INPUT;
+ }
+ plen -= hdr_len;
+
+ cvc->set_lsa(ct3d, set_lsa_payload->data, plen, set_lsa_payload->offset);
+ return CXL_MBOX_SUCCESS;
+}
+
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
+#define IMMEDIATE_DATA_CHANGE (1 << 2)
#define IMMEDIATE_POLICY_CHANGE (1 << 3)
#define IMMEDIATE_LOG_CHANGE (1 << 4)
@@ -349,6 +406,9 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
cmd_identify_memory_device, 0, 0 },
[CCLS][GET_PARTITION_INFO] = { "CCLS_GET_PARTITION_INFO",
cmd_ccls_get_partition_info, 0, 0 },
+ [CCLS][GET_LSA] = { "CCLS_GET_LSA", cmd_ccls_get_lsa, 0, 0 },
+ [CCLS][SET_LSA] = { "CCLS_SET_LSA", cmd_ccls_set_lsa,
+ ~0, IMMEDIATE_CONFIG_CHANGE | IMMEDIATE_DATA_CHANGE },
};
void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index b5aa1067df..6c6ed9a776 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -8,6 +8,7 @@
#include "qapi/error.h"
#include "qemu/log.h"
#include "qemu/module.h"
+#include "qemu/pmem.h"
#include "qemu/range.h"
#include "qemu/rcu.h"
#include "sysemu/hostmem.h"
@@ -113,6 +114,11 @@ static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
host_memory_backend_set_mapped(ct3d->hostmem, true);
ct3d->cxl_dstate.pmem_size = ct3d->hostmem->size;
+ if (!ct3d->lsa) {
+ error_setg(errp, "lsa property must be set");
+ return false;
+ }
+
return true;
}
@@ -176,12 +182,58 @@ static void ct3d_reset(DeviceState *dev)
static Property ct3_props[] = {
DEFINE_PROP_LINK("memdev", CXLType3Dev, hostmem, TYPE_MEMORY_BACKEND,
HostMemoryBackend *),
+ DEFINE_PROP_LINK("lsa", CXLType3Dev, lsa, TYPE_MEMORY_BACKEND,
+ HostMemoryBackend *),
DEFINE_PROP_END_OF_LIST(),
};
static uint64_t get_lsa_size(CXLType3Dev *ct3d)
{
- return 0;
+ MemoryRegion *mr;
+
+ mr = host_memory_backend_get_memory(ct3d->lsa);
+ return memory_region_size(mr);
+}
+
+static void validate_lsa_access(MemoryRegion *mr, uint64_t size,
+ uint64_t offset)
+{
+ assert(offset + size <= memory_region_size(mr));
+ assert(offset + size > offset);
+}
+
+static uint64_t get_lsa(CXLType3Dev *ct3d, void *buf, uint64_t size,
+ uint64_t offset)
+{
+ MemoryRegion *mr;
+ void *lsa;
+
+ mr = host_memory_backend_get_memory(ct3d->lsa);
+ validate_lsa_access(mr, size, offset);
+
+ lsa = memory_region_get_ram_ptr(mr) + offset;
+ memcpy(buf, lsa, size);
+
+ return size;
+}
+
+static void set_lsa(CXLType3Dev *ct3d, const void *buf, uint64_t size,
+ uint64_t offset)
+{
+ MemoryRegion *mr;
+ void *lsa;
+
+ mr = host_memory_backend_get_memory(ct3d->lsa);
+ validate_lsa_access(mr, size, offset);
+
+ lsa = memory_region_get_ram_ptr(mr) + offset;
+ memcpy(lsa, buf, size);
+ memory_region_set_dirty(mr, offset, size);
+
+ /*
+ * Just like the PMEM, if the guest is not allowed to exit gracefully, label
+ * updates will get lost.
+ */
}
static void ct3_class_init(ObjectClass *oc, void *data)
@@ -203,6 +255,8 @@ static void ct3_class_init(ObjectClass *oc, void *data)
device_class_set_props(dc, ct3_props);
cvc->get_lsa_size = get_lsa_size;
+ cvc->get_lsa = get_lsa;
+ cvc->set_lsa = set_lsa;
}
static const TypeInfo ct3d_info = {
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index ea2571a69b..4285fbda08 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -252,6 +252,11 @@ struct CXLType3Class {
/* public */
uint64_t (*get_lsa_size)(CXLType3Dev *ct3d);
+
+ uint64_t (*get_lsa)(CXLType3Dev *ct3d, void *buf, uint64_t size,
+ uint64_t offset);
+ void (*set_lsa)(CXLType3Dev *ct3d, const void *buf, uint64_t size,
+ uint64_t offset);
};
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 22/45] qtests/cxl: Add initial root port and CXL type3 tests
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
At this stage we can boot configurations with host bridges,
root ports and type 3 memory devices, so add appropriate
tests.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
tests/qtest/cxl-test.c | 127 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 127 insertions(+)
diff --git a/tests/qtest/cxl-test.c b/tests/qtest/cxl-test.c
index c031049930..5f0794e816 100644
--- a/tests/qtest/cxl-test.c
+++ b/tests/qtest/cxl-test.c
@@ -8,15 +8,142 @@
#include "qemu/osdep.h"
#include "libqtest-single.h"
+#define QEMU_PXB_CMD "-machine q35,cxl=on " \
+ "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 "
+
+#define QEMU_2PXB_CMD "-machine q35,cxl=on " \
+ "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 " \
+ "-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 "
+
+#define QEMU_RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 "
+
+/* Dual ports on first pxb */
+#define QEMU_2RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 " \
+ "-device cxl-rp,id=rp1,bus=cxl.0,chassis=0,slot=1 "
+
+/* Dual ports on each of the pxb instances */
+#define QEMU_4RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 " \
+ "-device cxl-rp,id=rp1,bus=cxl.0,chassis=0,slot=1 " \
+ "-device cxl-rp,id=rp2,bus=cxl.1,chassis=0,slot=2 " \
+ "-device cxl-rp,id=rp3,bus=cxl.1,chassis=0,slot=3 "
+
+#define QEMU_T3D "-object memory-backend-file,id=cxl-mem0,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa0,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp0,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0 "
+
+#define QEMU_2T3D "-object memory-backend-file,id=cxl-mem0,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa0,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp0,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0 " \
+ "-object memory-backend-file,id=cxl-mem1,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa1,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp1,memdev=cxl-mem1,lsa=lsa1,id=cxl-pmem1 "
+
+#define QEMU_4T3D "-object memory-backend-file,id=cxl-mem0,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa0,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp0,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0 " \
+ "-object memory-backend-file,id=cxl-mem1,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa1,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp1,memdev=cxl-mem1,lsa=lsa1,id=cxl-pmem1 " \
+ "-object memory-backend-file,id=cxl-mem2,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa2,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp2,memdev=cxl-mem2,lsa=lsa2,id=cxl-pmem2 " \
+ "-object memory-backend-file,id=cxl-mem3,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa3,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp3,memdev=cxl-mem3,lsa=lsa3,id=cxl-pmem3 "
+
+static void cxl_basic_hb(void)
+{
+ qtest_start("-machine q35,cxl=on");
+ qtest_end();
+}
+
static void cxl_basic_pxb(void)
{
qtest_start("-machine q35,cxl=on -device pxb-cxl,bus=pcie.0");
qtest_end();
}
+static void cxl_pxb_with_window(void)
+{
+ qtest_start(QEMU_PXB_CMD);
+ qtest_end();
+}
+
+static void cxl_2pxb_with_window(void)
+{
+ qtest_start(QEMU_2PXB_CMD);
+ qtest_end();
+}
+
+static void cxl_root_port(void)
+{
+ qtest_start(QEMU_PXB_CMD QEMU_RP);
+ qtest_end();
+}
+
+static void cxl_2root_port(void)
+{
+ qtest_start(QEMU_PXB_CMD QEMU_2RP);
+ qtest_end();
+}
+
+static void cxl_t3d(void)
+{
+ g_autoptr(GString) cmdline = g_string_new(NULL);
+ char template[] = "/tmp/cxl-test-XXXXXX";
+ const char *tmpfs;
+
+ tmpfs = mkdtemp(template);
+
+ g_string_printf(cmdline, QEMU_PXB_CMD QEMU_RP QEMU_T3D, tmpfs, tmpfs);
+
+ qtest_start(cmdline->str);
+ qtest_end();
+}
+
+static void cxl_1pxb_2rp_2t3d(void)
+{
+ g_autoptr(GString) cmdline = g_string_new(NULL);
+ char template[] = "/tmp/cxl-test-XXXXXX";
+ const char *tmpfs;
+
+ tmpfs = mkdtemp(template);
+
+ g_string_printf(cmdline, QEMU_PXB_CMD QEMU_2RP QEMU_2T3D,
+ tmpfs, tmpfs, tmpfs, tmpfs);
+
+ qtest_start(cmdline->str);
+ qtest_end();
+}
+
+static void cxl_2pxb_4rp_4t3d(void)
+{
+ g_autoptr(GString) cmdline = g_string_new(NULL);
+ char template[] = "/tmp/cxl-test-XXXXXX";
+ const char *tmpfs;
+
+ tmpfs = mkdtemp(template);
+
+ g_string_printf(cmdline, QEMU_2PXB_CMD QEMU_4RP QEMU_4T3D,
+ tmpfs, tmpfs, tmpfs, tmpfs, tmpfs, tmpfs,
+ tmpfs, tmpfs);
+
+ qtest_start(cmdline->str);
+ qtest_end();
+}
+
int main(int argc, char **argv)
{
g_test_init(&argc, &argv, NULL);
+
+ qtest_add_func("/pci/cxl/basic_hostbridge", cxl_basic_hb);
qtest_add_func("/pci/cxl/basic_pxb", cxl_basic_pxb);
+ qtest_add_func("/pci/cxl/pxb_with_window", cxl_pxb_with_window);
+ qtest_add_func("/pci/cxl/pxb_x2_with_window", cxl_2pxb_with_window);
+ qtest_add_func("/pci/cxl/rp", cxl_root_port);
+ qtest_add_func("/pci/cxl/rp_x2", cxl_2root_port);
+ qtest_add_func("/pci/cxl/type3_device", cxl_t3d);
+ qtest_add_func("/pci/cxl/rp_x2_type3_x2", cxl_1pxb_2rp_2t3d);
+ qtest_add_func("/pci/cxl/pxb_x2_root_port_x4_type3_x4", cxl_2pxb_4rp_4t3d);
return g_test_run();
}
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 22/45] qtests/cxl: Add initial root port and CXL type3 tests
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
At this stage we can boot configurations with host bridges,
root ports and type 3 memory devices, so add appropriate
tests.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
tests/qtest/cxl-test.c | 127 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 127 insertions(+)
diff --git a/tests/qtest/cxl-test.c b/tests/qtest/cxl-test.c
index c031049930..5f0794e816 100644
--- a/tests/qtest/cxl-test.c
+++ b/tests/qtest/cxl-test.c
@@ -8,15 +8,142 @@
#include "qemu/osdep.h"
#include "libqtest-single.h"
+#define QEMU_PXB_CMD "-machine q35,cxl=on " \
+ "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 "
+
+#define QEMU_2PXB_CMD "-machine q35,cxl=on " \
+ "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 " \
+ "-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 "
+
+#define QEMU_RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 "
+
+/* Dual ports on first pxb */
+#define QEMU_2RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 " \
+ "-device cxl-rp,id=rp1,bus=cxl.0,chassis=0,slot=1 "
+
+/* Dual ports on each of the pxb instances */
+#define QEMU_4RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 " \
+ "-device cxl-rp,id=rp1,bus=cxl.0,chassis=0,slot=1 " \
+ "-device cxl-rp,id=rp2,bus=cxl.1,chassis=0,slot=2 " \
+ "-device cxl-rp,id=rp3,bus=cxl.1,chassis=0,slot=3 "
+
+#define QEMU_T3D "-object memory-backend-file,id=cxl-mem0,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa0,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp0,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0 "
+
+#define QEMU_2T3D "-object memory-backend-file,id=cxl-mem0,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa0,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp0,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0 " \
+ "-object memory-backend-file,id=cxl-mem1,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa1,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp1,memdev=cxl-mem1,lsa=lsa1,id=cxl-pmem1 "
+
+#define QEMU_4T3D "-object memory-backend-file,id=cxl-mem0,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa0,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp0,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0 " \
+ "-object memory-backend-file,id=cxl-mem1,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa1,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp1,memdev=cxl-mem1,lsa=lsa1,id=cxl-pmem1 " \
+ "-object memory-backend-file,id=cxl-mem2,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa2,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp2,memdev=cxl-mem2,lsa=lsa2,id=cxl-pmem2 " \
+ "-object memory-backend-file,id=cxl-mem3,mem-path=%s,size=256M " \
+ "-object memory-backend-file,id=lsa3,mem-path=%s,size=256M " \
+ "-device cxl-type3,bus=rp3,memdev=cxl-mem3,lsa=lsa3,id=cxl-pmem3 "
+
+static void cxl_basic_hb(void)
+{
+ qtest_start("-machine q35,cxl=on");
+ qtest_end();
+}
+
static void cxl_basic_pxb(void)
{
qtest_start("-machine q35,cxl=on -device pxb-cxl,bus=pcie.0");
qtest_end();
}
+static void cxl_pxb_with_window(void)
+{
+ qtest_start(QEMU_PXB_CMD);
+ qtest_end();
+}
+
+static void cxl_2pxb_with_window(void)
+{
+ qtest_start(QEMU_2PXB_CMD);
+ qtest_end();
+}
+
+static void cxl_root_port(void)
+{
+ qtest_start(QEMU_PXB_CMD QEMU_RP);
+ qtest_end();
+}
+
+static void cxl_2root_port(void)
+{
+ qtest_start(QEMU_PXB_CMD QEMU_2RP);
+ qtest_end();
+}
+
+static void cxl_t3d(void)
+{
+ g_autoptr(GString) cmdline = g_string_new(NULL);
+ char template[] = "/tmp/cxl-test-XXXXXX";
+ const char *tmpfs;
+
+ tmpfs = mkdtemp(template);
+
+ g_string_printf(cmdline, QEMU_PXB_CMD QEMU_RP QEMU_T3D, tmpfs, tmpfs);
+
+ qtest_start(cmdline->str);
+ qtest_end();
+}
+
+static void cxl_1pxb_2rp_2t3d(void)
+{
+ g_autoptr(GString) cmdline = g_string_new(NULL);
+ char template[] = "/tmp/cxl-test-XXXXXX";
+ const char *tmpfs;
+
+ tmpfs = mkdtemp(template);
+
+ g_string_printf(cmdline, QEMU_PXB_CMD QEMU_2RP QEMU_2T3D,
+ tmpfs, tmpfs, tmpfs, tmpfs);
+
+ qtest_start(cmdline->str);
+ qtest_end();
+}
+
+static void cxl_2pxb_4rp_4t3d(void)
+{
+ g_autoptr(GString) cmdline = g_string_new(NULL);
+ char template[] = "/tmp/cxl-test-XXXXXX";
+ const char *tmpfs;
+
+ tmpfs = mkdtemp(template);
+
+ g_string_printf(cmdline, QEMU_2PXB_CMD QEMU_4RP QEMU_4T3D,
+ tmpfs, tmpfs, tmpfs, tmpfs, tmpfs, tmpfs,
+ tmpfs, tmpfs);
+
+ qtest_start(cmdline->str);
+ qtest_end();
+}
+
int main(int argc, char **argv)
{
g_test_init(&argc, &argv, NULL);
+
+ qtest_add_func("/pci/cxl/basic_hostbridge", cxl_basic_hb);
qtest_add_func("/pci/cxl/basic_pxb", cxl_basic_pxb);
+ qtest_add_func("/pci/cxl/pxb_with_window", cxl_pxb_with_window);
+ qtest_add_func("/pci/cxl/pxb_x2_with_window", cxl_2pxb_with_window);
+ qtest_add_func("/pci/cxl/rp", cxl_root_port);
+ qtest_add_func("/pci/cxl/rp_x2", cxl_2root_port);
+ qtest_add_func("/pci/cxl/type3_device", cxl_t3d);
+ qtest_add_func("/pci/cxl/rp_x2_type3_x2", cxl_1pxb_2rp_2t3d);
+ qtest_add_func("/pci/cxl/pxb_x2_root_port_x4_type3_x4", cxl_2pxb_4rp_4t3d);
return g_test_run();
}
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 23/45] hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
CXL host bridges themselves may have MMIO. Since host bridges don't have
a BAR they are treated as special for MMIO. This patch includes
i386/pc support.
Also hook up the device reset now that we have have the MMIO
space in which the results are visible.
Note that we duplicate the PCI express case for the aml_build but
the implementations will diverge when the CXL specific _OSC is
introduced.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/i386/acpi-build.c | 25 ++++++++++-
hw/i386/pc.c | 27 +++++++++++-
hw/pci-bridge/pci_expander_bridge.c | 66 ++++++++++++++++++++++++++---
include/hw/cxl/cxl.h | 14 ++++++
4 files changed, 122 insertions(+), 10 deletions(-)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index dcf6ece3d0..2d81b0f40c 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -28,6 +28,7 @@
#include "qemu/bitmap.h"
#include "qemu/error-report.h"
#include "hw/pci/pci.h"
+#include "hw/cxl/cxl.h"
#include "hw/core/cpu.h"
#include "target/i386/cpu.h"
#include "hw/misc/pvpanic.h"
@@ -1572,10 +1573,21 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
}
scope = aml_scope("\\_SB");
- dev = aml_device("PC%.02X", bus_num);
+
+ if (pci_bus_is_cxl(bus)) {
+ dev = aml_device("CL%.02X", bus_num);
+ } else {
+ dev = aml_device("PC%.02X", bus_num);
+ }
aml_append(dev, aml_name_decl("_UID", aml_int(bus_num)));
aml_append(dev, aml_name_decl("_BBN", aml_int(bus_num)));
- if (pci_bus_is_express(bus)) {
+ if (pci_bus_is_cxl(bus)) {
+ aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
+ aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
+
+ /* Expander bridges do not have ACPI PCI Hot-plug enabled */
+ aml_append(dev, build_q35_osc_method(true));
+ } else if (pci_bus_is_express(bus)) {
aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
@@ -1595,6 +1607,15 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
aml_append(dev, aml_name_decl("_CRS", crs));
aml_append(scope, dev);
aml_append(dsdt, scope);
+
+ /* Handle the ranges for the PXB expanders */
+ if (pci_bus_is_cxl(bus)) {
+ MemoryRegion *mr = &machine->cxl_devices_state->host_mr;
+ uint64_t base = mr->addr;
+
+ crs_range_insert(crs_range_set.mem_ranges, base,
+ base + memory_region_size(mr) - 1);
+ }
}
}
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index b752339beb..b56af1e4e7 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -75,6 +75,7 @@
#include "acpi-build.h"
#include "hw/mem/pc-dimm.h"
#include "hw/mem/nvdimm.h"
+#include "hw/cxl/cxl.h"
#include "qapi/error.h"
#include "qapi/qapi-visit-common.h"
#include "qapi/qapi-visit-machine.h"
@@ -816,6 +817,7 @@ void pc_memory_init(PCMachineState *pcms,
MachineClass *mc = MACHINE_GET_CLASS(machine);
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
X86MachineState *x86ms = X86_MACHINE(pcms);
+ hwaddr cxl_base;
assert(machine->ram_size == x86ms->below_4g_mem_size +
x86ms->above_4g_mem_size);
@@ -905,6 +907,26 @@ void pc_memory_init(PCMachineState *pcms,
&machine->device_memory->mr);
}
+ if (machine->cxl_devices_state->is_enabled) {
+ MemoryRegion *mr = &machine->cxl_devices_state->host_mr;
+ hwaddr cxl_size = MiB;
+
+ if (pcmc->has_reserved_memory && machine->device_memory->base) {
+ cxl_base = machine->device_memory->base;
+ if (!pcmc->broken_reserved_end) {
+ cxl_base += memory_region_size(&machine->device_memory->mr);
+ }
+ } else if (pcms->sgx_epc.size != 0) {
+ cxl_base = sgx_epc_above_4g_end(&pcms->sgx_epc);
+ } else {
+ cxl_base = 0x100000000ULL + x86ms->above_4g_mem_size;
+ }
+
+ e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+ memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
+ memory_region_add_subregion(system_memory, cxl_base, mr);
+ }
+
/* Initialize PC system firmware */
pc_system_firmware_init(pcms, rom_memory);
@@ -965,7 +987,10 @@ uint64_t pc_pci_hole64_start(void)
X86MachineState *x86ms = X86_MACHINE(pcms);
uint64_t hole64_start = 0;
- if (pcmc->has_reserved_memory && ms->device_memory->base) {
+ if (ms->cxl_devices_state->host_mr.addr) {
+ hole64_start = ms->cxl_devices_state->host_mr.addr +
+ memory_region_size(&ms->cxl_devices_state->host_mr);
+ } else if (pcmc->has_reserved_memory && ms->device_memory->base) {
hole64_start = ms->device_memory->base;
if (!pcmc->broken_reserved_end) {
hole64_start += memory_region_size(&ms->device_memory->mr);
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index f762eb4a6e..8fb4f2ea91 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -61,12 +61,6 @@ DECLARE_INSTANCE_CHECKER(PXBDev, PXB_PCIE_DEV,
DECLARE_INSTANCE_CHECKER(PXBDev, PXB_CXL_DEV,
TYPE_PXB_CXL_DEVICE)
-typedef struct CXLHost {
- PCIHostState parent_obj;
-
- CXLComponentState cxl_cstate;
-} CXLHost;
-
struct PXBDev {
/*< private >*/
PCIDevice parent_obj;
@@ -75,6 +69,9 @@ struct PXBDev {
uint8_t bus_nr;
uint16_t numa_node;
bool bypass_iommu;
+ struct cxl_dev {
+ CXLHost *cxl_host_bridge;
+ } cxl;
};
static PXBDev *convert_to_pxb(PCIDevice *dev)
@@ -197,6 +194,52 @@ static const TypeInfo pxb_host_info = {
.class_init = pxb_host_class_init,
};
+static void pxb_cxl_realize(DeviceState *dev, Error **errp)
+{
+ MachineState *ms = MACHINE(qdev_get_machine());
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ CXLHost *cxl = PXB_CXL_HOST(dev);
+ CXLComponentState *cxl_cstate = &cxl->cxl_cstate;
+ struct MemoryRegion *mr = &cxl_cstate->crb.component_registers;
+ hwaddr offset;
+
+ cxl_component_register_block_init(OBJECT(dev), cxl_cstate,
+ TYPE_PXB_CXL_HOST);
+ sysbus_init_mmio(sbd, mr);
+
+ offset = memory_region_size(mr) * ms->cxl_devices_state->next_mr_idx;
+ if (offset > memory_region_size(&ms->cxl_devices_state->host_mr)) {
+ error_setg(errp, "Insufficient space for pxb cxl host register space");
+ return;
+ }
+
+ memory_region_add_subregion(&ms->cxl_devices_state->host_mr, offset, mr);
+ ms->cxl_devices_state->next_mr_idx++;
+}
+
+static void pxb_cxl_host_class_init(ObjectClass *class, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(class);
+ PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(class);
+
+ hc->root_bus_path = pxb_host_root_bus_path;
+ dc->fw_name = "cxl";
+ dc->realize = pxb_cxl_realize;
+ /* Reason: Internal part of the pxb/pxb-pcie device, not usable by itself */
+ dc->user_creatable = false;
+}
+
+/*
+ * This is a device to handle the MMIO for a CXL host bridge. It does nothing
+ * else.
+ */
+static const TypeInfo cxl_host_info = {
+ .name = TYPE_PXB_CXL_HOST,
+ .parent = TYPE_PCI_HOST_BRIDGE,
+ .instance_size = sizeof(CXLHost),
+ .class_init = pxb_cxl_host_class_init,
+};
+
/*
* Registers the PXB bus as a child of pci host root bus.
*/
@@ -245,6 +288,13 @@ static int pxb_map_irq_fn(PCIDevice *pci_dev, int pin)
static void pxb_dev_reset(DeviceState *dev)
{
+ CXLHost *cxl = PXB_CXL_DEV(dev)->cxl.cxl_host_bridge;
+ CXLComponentState *cxl_cstate = &cxl->cxl_cstate;
+ uint32_t *reg_state = cxl_cstate->crb.cache_mem_registers;
+ uint32_t *write_msk = cxl_cstate->crb.cache_mem_regs_write_mask;
+
+ cxl_component_register_init_common(reg_state, write_msk, CXL2_ROOT_PORT);
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 8);
}
static gint pxb_compare(gconstpointer a, gconstpointer b)
@@ -281,12 +331,13 @@ static void pxb_dev_realize_common(PCIDevice *dev, enum BusType type,
dev_name = dev->qdev.id;
}
- ds = qdev_new(TYPE_PXB_HOST);
+ ds = qdev_new(type == CXL ? TYPE_PXB_CXL_HOST : TYPE_PXB_HOST);
if (type == PCIE) {
bus = pci_root_bus_new(ds, dev_name, NULL, NULL, 0, TYPE_PXB_PCIE_BUS);
} else if (type == CXL) {
bus = pci_root_bus_new(ds, dev_name, NULL, NULL, 0, TYPE_PXB_CXL_BUS);
bus->flags |= PCI_BUS_CXL;
+ PXB_CXL_DEV(dev)->cxl.cxl_host_bridge = PXB_CXL_HOST(ds);
} else {
bus = pci_root_bus_new(ds, "pxb-internal", NULL, NULL, 0, TYPE_PXB_BUS);
bds = qdev_new("pci-bridge");
@@ -475,6 +526,7 @@ static void pxb_register_types(void)
type_register_static(&pxb_pcie_bus_info);
type_register_static(&pxb_cxl_bus_info);
type_register_static(&pxb_host_info);
+ type_register_static(&cxl_host_info);
type_register_static(&pxb_dev_info);
type_register_static(&pxb_pcie_dev_info);
type_register_static(&pxb_cxl_dev_info);
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 31af92fd5e..8d1a7245d0 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -10,6 +10,7 @@
#ifndef CXL_H
#define CXL_H
+#include "hw/pci/pci_host.h"
#include "cxl_pci.h"
#include "cxl_component.h"
#include "cxl_device.h"
@@ -17,8 +18,21 @@
#define CXL_COMPONENT_REG_BAR_IDX 0
#define CXL_DEVICE_REG_BAR_IDX 2
+#define CXL_WINDOW_MAX 10
+
typedef struct CXLState {
bool is_enabled;
+ MemoryRegion host_mr;
+ unsigned int next_mr_idx;
} CXLState;
+struct CXLHost {
+ PCIHostState parent_obj;
+
+ CXLComponentState cxl_cstate;
+};
+
+#define TYPE_PXB_CXL_HOST "pxb-cxl-host"
+OBJECT_DECLARE_SIMPLE_TYPE(CXLHost, PXB_CXL_HOST)
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 23/45] hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
CXL host bridges themselves may have MMIO. Since host bridges don't have
a BAR they are treated as special for MMIO. This patch includes
i386/pc support.
Also hook up the device reset now that we have have the MMIO
space in which the results are visible.
Note that we duplicate the PCI express case for the aml_build but
the implementations will diverge when the CXL specific _OSC is
introduced.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/i386/acpi-build.c | 25 ++++++++++-
hw/i386/pc.c | 27 +++++++++++-
hw/pci-bridge/pci_expander_bridge.c | 66 ++++++++++++++++++++++++++---
include/hw/cxl/cxl.h | 14 ++++++
4 files changed, 122 insertions(+), 10 deletions(-)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index dcf6ece3d0..2d81b0f40c 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -28,6 +28,7 @@
#include "qemu/bitmap.h"
#include "qemu/error-report.h"
#include "hw/pci/pci.h"
+#include "hw/cxl/cxl.h"
#include "hw/core/cpu.h"
#include "target/i386/cpu.h"
#include "hw/misc/pvpanic.h"
@@ -1572,10 +1573,21 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
}
scope = aml_scope("\\_SB");
- dev = aml_device("PC%.02X", bus_num);
+
+ if (pci_bus_is_cxl(bus)) {
+ dev = aml_device("CL%.02X", bus_num);
+ } else {
+ dev = aml_device("PC%.02X", bus_num);
+ }
aml_append(dev, aml_name_decl("_UID", aml_int(bus_num)));
aml_append(dev, aml_name_decl("_BBN", aml_int(bus_num)));
- if (pci_bus_is_express(bus)) {
+ if (pci_bus_is_cxl(bus)) {
+ aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
+ aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
+
+ /* Expander bridges do not have ACPI PCI Hot-plug enabled */
+ aml_append(dev, build_q35_osc_method(true));
+ } else if (pci_bus_is_express(bus)) {
aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
@@ -1595,6 +1607,15 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
aml_append(dev, aml_name_decl("_CRS", crs));
aml_append(scope, dev);
aml_append(dsdt, scope);
+
+ /* Handle the ranges for the PXB expanders */
+ if (pci_bus_is_cxl(bus)) {
+ MemoryRegion *mr = &machine->cxl_devices_state->host_mr;
+ uint64_t base = mr->addr;
+
+ crs_range_insert(crs_range_set.mem_ranges, base,
+ base + memory_region_size(mr) - 1);
+ }
}
}
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index b752339beb..b56af1e4e7 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -75,6 +75,7 @@
#include "acpi-build.h"
#include "hw/mem/pc-dimm.h"
#include "hw/mem/nvdimm.h"
+#include "hw/cxl/cxl.h"
#include "qapi/error.h"
#include "qapi/qapi-visit-common.h"
#include "qapi/qapi-visit-machine.h"
@@ -816,6 +817,7 @@ void pc_memory_init(PCMachineState *pcms,
MachineClass *mc = MACHINE_GET_CLASS(machine);
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
X86MachineState *x86ms = X86_MACHINE(pcms);
+ hwaddr cxl_base;
assert(machine->ram_size == x86ms->below_4g_mem_size +
x86ms->above_4g_mem_size);
@@ -905,6 +907,26 @@ void pc_memory_init(PCMachineState *pcms,
&machine->device_memory->mr);
}
+ if (machine->cxl_devices_state->is_enabled) {
+ MemoryRegion *mr = &machine->cxl_devices_state->host_mr;
+ hwaddr cxl_size = MiB;
+
+ if (pcmc->has_reserved_memory && machine->device_memory->base) {
+ cxl_base = machine->device_memory->base;
+ if (!pcmc->broken_reserved_end) {
+ cxl_base += memory_region_size(&machine->device_memory->mr);
+ }
+ } else if (pcms->sgx_epc.size != 0) {
+ cxl_base = sgx_epc_above_4g_end(&pcms->sgx_epc);
+ } else {
+ cxl_base = 0x100000000ULL + x86ms->above_4g_mem_size;
+ }
+
+ e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+ memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
+ memory_region_add_subregion(system_memory, cxl_base, mr);
+ }
+
/* Initialize PC system firmware */
pc_system_firmware_init(pcms, rom_memory);
@@ -965,7 +987,10 @@ uint64_t pc_pci_hole64_start(void)
X86MachineState *x86ms = X86_MACHINE(pcms);
uint64_t hole64_start = 0;
- if (pcmc->has_reserved_memory && ms->device_memory->base) {
+ if (ms->cxl_devices_state->host_mr.addr) {
+ hole64_start = ms->cxl_devices_state->host_mr.addr +
+ memory_region_size(&ms->cxl_devices_state->host_mr);
+ } else if (pcmc->has_reserved_memory && ms->device_memory->base) {
hole64_start = ms->device_memory->base;
if (!pcmc->broken_reserved_end) {
hole64_start += memory_region_size(&ms->device_memory->mr);
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index f762eb4a6e..8fb4f2ea91 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -61,12 +61,6 @@ DECLARE_INSTANCE_CHECKER(PXBDev, PXB_PCIE_DEV,
DECLARE_INSTANCE_CHECKER(PXBDev, PXB_CXL_DEV,
TYPE_PXB_CXL_DEVICE)
-typedef struct CXLHost {
- PCIHostState parent_obj;
-
- CXLComponentState cxl_cstate;
-} CXLHost;
-
struct PXBDev {
/*< private >*/
PCIDevice parent_obj;
@@ -75,6 +69,9 @@ struct PXBDev {
uint8_t bus_nr;
uint16_t numa_node;
bool bypass_iommu;
+ struct cxl_dev {
+ CXLHost *cxl_host_bridge;
+ } cxl;
};
static PXBDev *convert_to_pxb(PCIDevice *dev)
@@ -197,6 +194,52 @@ static const TypeInfo pxb_host_info = {
.class_init = pxb_host_class_init,
};
+static void pxb_cxl_realize(DeviceState *dev, Error **errp)
+{
+ MachineState *ms = MACHINE(qdev_get_machine());
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ CXLHost *cxl = PXB_CXL_HOST(dev);
+ CXLComponentState *cxl_cstate = &cxl->cxl_cstate;
+ struct MemoryRegion *mr = &cxl_cstate->crb.component_registers;
+ hwaddr offset;
+
+ cxl_component_register_block_init(OBJECT(dev), cxl_cstate,
+ TYPE_PXB_CXL_HOST);
+ sysbus_init_mmio(sbd, mr);
+
+ offset = memory_region_size(mr) * ms->cxl_devices_state->next_mr_idx;
+ if (offset > memory_region_size(&ms->cxl_devices_state->host_mr)) {
+ error_setg(errp, "Insufficient space for pxb cxl host register space");
+ return;
+ }
+
+ memory_region_add_subregion(&ms->cxl_devices_state->host_mr, offset, mr);
+ ms->cxl_devices_state->next_mr_idx++;
+}
+
+static void pxb_cxl_host_class_init(ObjectClass *class, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(class);
+ PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(class);
+
+ hc->root_bus_path = pxb_host_root_bus_path;
+ dc->fw_name = "cxl";
+ dc->realize = pxb_cxl_realize;
+ /* Reason: Internal part of the pxb/pxb-pcie device, not usable by itself */
+ dc->user_creatable = false;
+}
+
+/*
+ * This is a device to handle the MMIO for a CXL host bridge. It does nothing
+ * else.
+ */
+static const TypeInfo cxl_host_info = {
+ .name = TYPE_PXB_CXL_HOST,
+ .parent = TYPE_PCI_HOST_BRIDGE,
+ .instance_size = sizeof(CXLHost),
+ .class_init = pxb_cxl_host_class_init,
+};
+
/*
* Registers the PXB bus as a child of pci host root bus.
*/
@@ -245,6 +288,13 @@ static int pxb_map_irq_fn(PCIDevice *pci_dev, int pin)
static void pxb_dev_reset(DeviceState *dev)
{
+ CXLHost *cxl = PXB_CXL_DEV(dev)->cxl.cxl_host_bridge;
+ CXLComponentState *cxl_cstate = &cxl->cxl_cstate;
+ uint32_t *reg_state = cxl_cstate->crb.cache_mem_registers;
+ uint32_t *write_msk = cxl_cstate->crb.cache_mem_regs_write_mask;
+
+ cxl_component_register_init_common(reg_state, write_msk, CXL2_ROOT_PORT);
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 8);
}
static gint pxb_compare(gconstpointer a, gconstpointer b)
@@ -281,12 +331,13 @@ static void pxb_dev_realize_common(PCIDevice *dev, enum BusType type,
dev_name = dev->qdev.id;
}
- ds = qdev_new(TYPE_PXB_HOST);
+ ds = qdev_new(type == CXL ? TYPE_PXB_CXL_HOST : TYPE_PXB_HOST);
if (type == PCIE) {
bus = pci_root_bus_new(ds, dev_name, NULL, NULL, 0, TYPE_PXB_PCIE_BUS);
} else if (type == CXL) {
bus = pci_root_bus_new(ds, dev_name, NULL, NULL, 0, TYPE_PXB_CXL_BUS);
bus->flags |= PCI_BUS_CXL;
+ PXB_CXL_DEV(dev)->cxl.cxl_host_bridge = PXB_CXL_HOST(ds);
} else {
bus = pci_root_bus_new(ds, "pxb-internal", NULL, NULL, 0, TYPE_PXB_BUS);
bds = qdev_new("pci-bridge");
@@ -475,6 +526,7 @@ static void pxb_register_types(void)
type_register_static(&pxb_pcie_bus_info);
type_register_static(&pxb_cxl_bus_info);
type_register_static(&pxb_host_info);
+ type_register_static(&cxl_host_info);
type_register_static(&pxb_dev_info);
type_register_static(&pxb_pcie_dev_info);
type_register_static(&pxb_cxl_dev_info);
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 31af92fd5e..8d1a7245d0 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -10,6 +10,7 @@
#ifndef CXL_H
#define CXL_H
+#include "hw/pci/pci_host.h"
#include "cxl_pci.h"
#include "cxl_component.h"
#include "cxl_device.h"
@@ -17,8 +18,21 @@
#define CXL_COMPONENT_REG_BAR_IDX 0
#define CXL_DEVICE_REG_BAR_IDX 2
+#define CXL_WINDOW_MAX 10
+
typedef struct CXLState {
bool is_enabled;
+ MemoryRegion host_mr;
+ unsigned int next_mr_idx;
} CXLState;
+struct CXLHost {
+ PCIHostState parent_obj;
+
+ CXLComponentState cxl_cstate;
+};
+
+#define TYPE_PXB_CXL_HOST "pxb-cxl-host"
+OBJECT_DECLARE_SIMPLE_TYPE(CXLHost, PXB_CXL_HOST)
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 24/45] acpi/cxl: Add _OSC implementation (9.14.2)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
CXL 2.0 specification adds 2 new dwords to the existing _OSC definition
from PCIe. The new dwords are accessed with a new uuid. This
implementation supports what is in the specification.
iasl -d decodes the result of this patch as:
Name (SUPP, Zero)
Name (CTRL, Zero)
Name (SUPC, Zero)
Name (CTRC, Zero)
Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities
{
CreateDWordField (Arg3, Zero, CDW1)
If (((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */) || (Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */)))
{
CreateDWordField (Arg3, 0x04, CDW2)
CreateDWordField (Arg3, 0x08, CDW3)
Local0 = CDW3 /* \_SB_.PC0C._OSC.CDW3 */
Local0 &= 0x1F
If ((Arg1 != One))
{
CDW1 |= 0x08
}
If ((CDW3 != Local0))
{
CDW1 |= 0x10
}
SUPP = CDW2 /* \_SB_.PC0C._OSC.CDW2 */
CTRL = CDW3 /* \_SB_.PC0C._OSC.CDW3 */
CDW3 = Local0
If ((Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */))
{
CreateDWordField (Arg3, 0x0C, CDW4)
CreateDWordField (Arg3, 0x10, CDW5)
SUPC = CDW4 /* \_SB_.PC0C._OSC.CDW4 */
CTRC = CDW5 /* \_SB_.PC0C._OSC.CDW5 */
CDW5 |= One
}
Return (Arg3)
}
Else
{
CDW1 |= 0x04
Return (Arg3)
}
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/acpi/Kconfig | 5 ++
hw/acpi/cxl-stub.c | 12 ++++
hw/acpi/cxl.c | 130 ++++++++++++++++++++++++++++++++++++++++++
hw/acpi/meson.build | 4 +-
hw/i386/acpi-build.c | 15 +++--
include/hw/acpi/cxl.h | 23 ++++++++
6 files changed, 183 insertions(+), 6 deletions(-)
diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
index 19caebde6c..3703aca212 100644
--- a/hw/acpi/Kconfig
+++ b/hw/acpi/Kconfig
@@ -5,6 +5,7 @@ config ACPI_X86
bool
select ACPI
select ACPI_NVDIMM
+ select ACPI_CXL
select ACPI_CPU_HOTPLUG
select ACPI_MEMORY_HOTPLUG
select ACPI_HMAT
@@ -66,3 +67,7 @@ config ACPI_ERST
bool
default y
depends on ACPI && PCI
+
+config ACPI_CXL
+ bool
+ depends on ACPI
diff --git a/hw/acpi/cxl-stub.c b/hw/acpi/cxl-stub.c
new file mode 100644
index 0000000000..15bc21076b
--- /dev/null
+++ b/hw/acpi/cxl-stub.c
@@ -0,0 +1,12 @@
+
+/*
+ * Stubs for ACPI platforms that don't support CXl
+ */
+#include "qemu/osdep.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/cxl.h"
+
+void build_cxl_osc_method(Aml *dev)
+{
+ g_assert_not_reached();
+}
diff --git a/hw/acpi/cxl.c b/hw/acpi/cxl.c
new file mode 100644
index 0000000000..ca1f04f359
--- /dev/null
+++ b/hw/acpi/cxl.c
@@ -0,0 +1,130 @@
+/*
+ * CXL ACPI Implementation
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>
+ */
+
+#include "qemu/osdep.h"
+#include "hw/cxl/cxl.h"
+#include "hw/acpi/acpi.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/bios-linker-loader.h"
+#include "hw/acpi/cxl.h"
+#include "qapi/error.h"
+#include "qemu/uuid.h"
+
+static Aml *__build_cxl_osc_method(void)
+{
+ Aml *method, *if_uuid, *else_uuid, *if_arg1_not_1, *if_cxl, *if_caps_masked;
+ Aml *a_ctrl = aml_local(0);
+ Aml *a_cdw1 = aml_name("CDW1");
+
+ method = aml_method("_OSC", 4, AML_NOTSERIALIZED);
+ /* CDW1 is used for the return value so is present whether or not a match occurs */
+ aml_append(method, aml_create_dword_field(aml_arg(3), aml_int(0), "CDW1"));
+
+ /*
+ * Generate shared section between:
+ * CXL 2.0 - 9.14.2.1.4 and
+ * PCI Firmware Specification 3.0
+ * 4.5.1. _OSC Interface for PCI Host Bridge Devices
+ * The _OSC interface for a PCI/PCI-X/PCI Express hierarchy is
+ * identified by the Universal Unique IDentifier (UUID)
+ * 33DB4D5B-1FF7-401C-9657-7441C03DD766
+ * The _OSC interface for a CXL Host bridge is
+ * identified by the UUID 68F2D50B-C469-4D8A-BD3D-941A103FD3FC
+ * A CXL Host bridge is compatible with a PCI host bridge so
+ * for the shared section match both.
+ */
+ if_uuid = aml_if(
+ aml_lor(aml_equal(aml_arg(0),
+ aml_touuid("33DB4D5B-1FF7-401C-9657-7441C03DD766")),
+ aml_equal(aml_arg(0),
+ aml_touuid("68F2D50B-C469-4D8A-BD3D-941A103FD3FC"))));
+ aml_append(if_uuid, aml_create_dword_field(aml_arg(3), aml_int(4), "CDW2"));
+ aml_append(if_uuid, aml_create_dword_field(aml_arg(3), aml_int(8), "CDW3"));
+
+ aml_append(if_uuid, aml_store(aml_name("CDW3"), a_ctrl));
+
+ /*
+ *
+ * Allows OS control for all 5 features:
+ * PCIeHotplug SHPCHotplug PME AER PCIeCapability
+ */
+ aml_append(if_uuid, aml_and(a_ctrl, aml_int(0x1F), a_ctrl));
+
+ /*
+ * Check _OSC revision.
+ * PCI Firmware specification 3.3 and CXL 2.0 both use revision 1
+ * Unknown Revision is CDW1 - BIT (3)
+ */
+ if_arg1_not_1 = aml_if(aml_lnot(aml_equal(aml_arg(1), aml_int(0x1))));
+ aml_append(if_arg1_not_1, aml_or(a_cdw1, aml_int(0x08), a_cdw1));
+ aml_append(if_uuid, if_arg1_not_1);
+
+ if_caps_masked = aml_if(aml_lnot(aml_equal(aml_name("CDW3"), a_ctrl)));
+
+ /* Capability bits were masked */
+ aml_append(if_caps_masked, aml_or(a_cdw1, aml_int(0x10), a_cdw1));
+ aml_append(if_uuid, if_caps_masked);
+
+ aml_append(if_uuid, aml_store(aml_name("CDW2"), aml_name("SUPP")));
+ aml_append(if_uuid, aml_store(aml_name("CDW3"), aml_name("CTRL")));
+
+ /* Update DWORD3 (the return value) */
+ aml_append(if_uuid, aml_store(a_ctrl, aml_name("CDW3")));
+
+ /* CXL only section as per CXL 2.0 - 9.14.2.1.4 */
+ if_cxl = aml_if(aml_equal(
+ aml_arg(0), aml_touuid("68F2D50B-C469-4D8A-BD3D-941A103FD3FC")));
+ /* CXL support field */
+ aml_append(if_cxl, aml_create_dword_field(aml_arg(3), aml_int(12), "CDW4"));
+ /* CXL capabilities */
+ aml_append(if_cxl, aml_create_dword_field(aml_arg(3), aml_int(16), "CDW5"));
+ aml_append(if_cxl, aml_store(aml_name("CDW4"), aml_name("SUPC")));
+ aml_append(if_cxl, aml_store(aml_name("CDW5"), aml_name("CTRC")));
+
+ /* CXL 2.0 Port/Device Register access */
+ aml_append(if_cxl,
+ aml_or(aml_name("CDW5"), aml_int(0x1), aml_name("CDW5")));
+ aml_append(if_uuid, if_cxl);
+
+ aml_append(if_uuid, aml_return(aml_arg(3)));
+ aml_append(method, if_uuid);
+
+ /*
+ * If no UUID matched, return Unrecognized UUID via Arg3 DWord 1
+ * ACPI 6.4 - 6.2.11
+ * Unrecognised UUID - BIT(2)
+ */
+ else_uuid = aml_else();
+
+ aml_append(else_uuid,
+ aml_or(aml_name("CDW1"), aml_int(0x4), aml_name("CDW1")));
+ aml_append(else_uuid, aml_return(aml_arg(3)));
+ aml_append(method, else_uuid);
+
+ return method;
+}
+
+void build_cxl_osc_method(Aml *dev)
+{
+ aml_append(dev, aml_name_decl("SUPP", aml_int(0)));
+ aml_append(dev, aml_name_decl("CTRL", aml_int(0)));
+ aml_append(dev, aml_name_decl("SUPC", aml_int(0)));
+ aml_append(dev, aml_name_decl("CTRC", aml_int(0)));
+ aml_append(dev, __build_cxl_osc_method());
+}
diff --git a/hw/acpi/meson.build b/hw/acpi/meson.build
index 8bea2e6933..cea2f5f93a 100644
--- a/hw/acpi/meson.build
+++ b/hw/acpi/meson.build
@@ -13,6 +13,7 @@ acpi_ss.add(when: 'CONFIG_ACPI_MEMORY_HOTPLUG', if_false: files('acpi-mem-hotplu
acpi_ss.add(when: 'CONFIG_ACPI_NVDIMM', if_true: files('nvdimm.c'))
acpi_ss.add(when: 'CONFIG_ACPI_NVDIMM', if_false: files('acpi-nvdimm-stub.c'))
acpi_ss.add(when: 'CONFIG_ACPI_PCI', if_true: files('pci.c'))
+acpi_ss.add(when: 'CONFIG_ACPI_CXL', if_true: files('cxl.c'), if_false: files('cxl-stub.c'))
acpi_ss.add(when: 'CONFIG_ACPI_VMGENID', if_true: files('vmgenid.c'))
acpi_ss.add(when: 'CONFIG_ACPI_HW_REDUCED', if_true: files('generic_event_device.c'))
acpi_ss.add(when: 'CONFIG_ACPI_HMAT', if_true: files('hmat.c'))
@@ -33,4 +34,5 @@ softmmu_ss.add_all(when: 'CONFIG_ACPI', if_true: acpi_ss)
softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('acpi-stub.c', 'aml-build-stub.c',
'acpi-x86-stub.c', 'ipmi-stub.c', 'ghes-stub.c',
'acpi-mem-hotplug-stub.c', 'acpi-cpu-hotplug-stub.c',
- 'acpi-pci-hotplug-stub.c', 'acpi-nvdimm-stub.c'))
+ 'acpi-pci-hotplug-stub.c', 'acpi-nvdimm-stub.c',
+ 'cxl-stub.c'))
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 2d81b0f40c..59ede8b2e9 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -67,6 +67,7 @@
#include "hw/acpi/aml-build.h"
#include "hw/acpi/utils.h"
#include "hw/acpi/pci.h"
+#include "hw/acpi/cxl.h"
#include "qom/qom-qobject.h"
#include "hw/i386/amd_iommu.h"
@@ -1582,11 +1583,15 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
aml_append(dev, aml_name_decl("_UID", aml_int(bus_num)));
aml_append(dev, aml_name_decl("_BBN", aml_int(bus_num)));
if (pci_bus_is_cxl(bus)) {
- aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
- aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
-
- /* Expander bridges do not have ACPI PCI Hot-plug enabled */
- aml_append(dev, build_q35_osc_method(true));
+ struct Aml *pkg = aml_package(2);
+
+ aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0016")));
+ aml_append(pkg, aml_eisaid("PNP0A08"));
+ aml_append(pkg, aml_eisaid("PNP0A03"));
+ aml_append(dev, aml_name_decl("_CID", pkg));
+ aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
+ aml_append(dev, aml_name_decl("_UID", aml_int(bus_num)));
+ build_cxl_osc_method(dev);
} else if (pci_bus_is_express(bus)) {
aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
diff --git a/include/hw/acpi/cxl.h b/include/hw/acpi/cxl.h
new file mode 100644
index 0000000000..7b8f3b8a2e
--- /dev/null
+++ b/include/hw/acpi/cxl.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2020 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_ACPI_CXL_H
+#define HW_ACPI_CXL_H
+
+void build_cxl_osc_method(Aml *dev);
+
+#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 24/45] acpi/cxl: Add _OSC implementation (9.14.2)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
CXL 2.0 specification adds 2 new dwords to the existing _OSC definition
from PCIe. The new dwords are accessed with a new uuid. This
implementation supports what is in the specification.
iasl -d decodes the result of this patch as:
Name (SUPP, Zero)
Name (CTRL, Zero)
Name (SUPC, Zero)
Name (CTRC, Zero)
Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities
{
CreateDWordField (Arg3, Zero, CDW1)
If (((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */) || (Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */)))
{
CreateDWordField (Arg3, 0x04, CDW2)
CreateDWordField (Arg3, 0x08, CDW3)
Local0 = CDW3 /* \_SB_.PC0C._OSC.CDW3 */
Local0 &= 0x1F
If ((Arg1 != One))
{
CDW1 |= 0x08
}
If ((CDW3 != Local0))
{
CDW1 |= 0x10
}
SUPP = CDW2 /* \_SB_.PC0C._OSC.CDW2 */
CTRL = CDW3 /* \_SB_.PC0C._OSC.CDW3 */
CDW3 = Local0
If ((Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */))
{
CreateDWordField (Arg3, 0x0C, CDW4)
CreateDWordField (Arg3, 0x10, CDW5)
SUPC = CDW4 /* \_SB_.PC0C._OSC.CDW4 */
CTRC = CDW5 /* \_SB_.PC0C._OSC.CDW5 */
CDW5 |= One
}
Return (Arg3)
}
Else
{
CDW1 |= 0x04
Return (Arg3)
}
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/acpi/Kconfig | 5 ++
hw/acpi/cxl-stub.c | 12 ++++
hw/acpi/cxl.c | 130 ++++++++++++++++++++++++++++++++++++++++++
hw/acpi/meson.build | 4 +-
hw/i386/acpi-build.c | 15 +++--
include/hw/acpi/cxl.h | 23 ++++++++
6 files changed, 183 insertions(+), 6 deletions(-)
diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
index 19caebde6c..3703aca212 100644
--- a/hw/acpi/Kconfig
+++ b/hw/acpi/Kconfig
@@ -5,6 +5,7 @@ config ACPI_X86
bool
select ACPI
select ACPI_NVDIMM
+ select ACPI_CXL
select ACPI_CPU_HOTPLUG
select ACPI_MEMORY_HOTPLUG
select ACPI_HMAT
@@ -66,3 +67,7 @@ config ACPI_ERST
bool
default y
depends on ACPI && PCI
+
+config ACPI_CXL
+ bool
+ depends on ACPI
diff --git a/hw/acpi/cxl-stub.c b/hw/acpi/cxl-stub.c
new file mode 100644
index 0000000000..15bc21076b
--- /dev/null
+++ b/hw/acpi/cxl-stub.c
@@ -0,0 +1,12 @@
+
+/*
+ * Stubs for ACPI platforms that don't support CXl
+ */
+#include "qemu/osdep.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/cxl.h"
+
+void build_cxl_osc_method(Aml *dev)
+{
+ g_assert_not_reached();
+}
diff --git a/hw/acpi/cxl.c b/hw/acpi/cxl.c
new file mode 100644
index 0000000000..ca1f04f359
--- /dev/null
+++ b/hw/acpi/cxl.c
@@ -0,0 +1,130 @@
+/*
+ * CXL ACPI Implementation
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>
+ */
+
+#include "qemu/osdep.h"
+#include "hw/cxl/cxl.h"
+#include "hw/acpi/acpi.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/bios-linker-loader.h"
+#include "hw/acpi/cxl.h"
+#include "qapi/error.h"
+#include "qemu/uuid.h"
+
+static Aml *__build_cxl_osc_method(void)
+{
+ Aml *method, *if_uuid, *else_uuid, *if_arg1_not_1, *if_cxl, *if_caps_masked;
+ Aml *a_ctrl = aml_local(0);
+ Aml *a_cdw1 = aml_name("CDW1");
+
+ method = aml_method("_OSC", 4, AML_NOTSERIALIZED);
+ /* CDW1 is used for the return value so is present whether or not a match occurs */
+ aml_append(method, aml_create_dword_field(aml_arg(3), aml_int(0), "CDW1"));
+
+ /*
+ * Generate shared section between:
+ * CXL 2.0 - 9.14.2.1.4 and
+ * PCI Firmware Specification 3.0
+ * 4.5.1. _OSC Interface for PCI Host Bridge Devices
+ * The _OSC interface for a PCI/PCI-X/PCI Express hierarchy is
+ * identified by the Universal Unique IDentifier (UUID)
+ * 33DB4D5B-1FF7-401C-9657-7441C03DD766
+ * The _OSC interface for a CXL Host bridge is
+ * identified by the UUID 68F2D50B-C469-4D8A-BD3D-941A103FD3FC
+ * A CXL Host bridge is compatible with a PCI host bridge so
+ * for the shared section match both.
+ */
+ if_uuid = aml_if(
+ aml_lor(aml_equal(aml_arg(0),
+ aml_touuid("33DB4D5B-1FF7-401C-9657-7441C03DD766")),
+ aml_equal(aml_arg(0),
+ aml_touuid("68F2D50B-C469-4D8A-BD3D-941A103FD3FC"))));
+ aml_append(if_uuid, aml_create_dword_field(aml_arg(3), aml_int(4), "CDW2"));
+ aml_append(if_uuid, aml_create_dword_field(aml_arg(3), aml_int(8), "CDW3"));
+
+ aml_append(if_uuid, aml_store(aml_name("CDW3"), a_ctrl));
+
+ /*
+ *
+ * Allows OS control for all 5 features:
+ * PCIeHotplug SHPCHotplug PME AER PCIeCapability
+ */
+ aml_append(if_uuid, aml_and(a_ctrl, aml_int(0x1F), a_ctrl));
+
+ /*
+ * Check _OSC revision.
+ * PCI Firmware specification 3.3 and CXL 2.0 both use revision 1
+ * Unknown Revision is CDW1 - BIT (3)
+ */
+ if_arg1_not_1 = aml_if(aml_lnot(aml_equal(aml_arg(1), aml_int(0x1))));
+ aml_append(if_arg1_not_1, aml_or(a_cdw1, aml_int(0x08), a_cdw1));
+ aml_append(if_uuid, if_arg1_not_1);
+
+ if_caps_masked = aml_if(aml_lnot(aml_equal(aml_name("CDW3"), a_ctrl)));
+
+ /* Capability bits were masked */
+ aml_append(if_caps_masked, aml_or(a_cdw1, aml_int(0x10), a_cdw1));
+ aml_append(if_uuid, if_caps_masked);
+
+ aml_append(if_uuid, aml_store(aml_name("CDW2"), aml_name("SUPP")));
+ aml_append(if_uuid, aml_store(aml_name("CDW3"), aml_name("CTRL")));
+
+ /* Update DWORD3 (the return value) */
+ aml_append(if_uuid, aml_store(a_ctrl, aml_name("CDW3")));
+
+ /* CXL only section as per CXL 2.0 - 9.14.2.1.4 */
+ if_cxl = aml_if(aml_equal(
+ aml_arg(0), aml_touuid("68F2D50B-C469-4D8A-BD3D-941A103FD3FC")));
+ /* CXL support field */
+ aml_append(if_cxl, aml_create_dword_field(aml_arg(3), aml_int(12), "CDW4"));
+ /* CXL capabilities */
+ aml_append(if_cxl, aml_create_dword_field(aml_arg(3), aml_int(16), "CDW5"));
+ aml_append(if_cxl, aml_store(aml_name("CDW4"), aml_name("SUPC")));
+ aml_append(if_cxl, aml_store(aml_name("CDW5"), aml_name("CTRC")));
+
+ /* CXL 2.0 Port/Device Register access */
+ aml_append(if_cxl,
+ aml_or(aml_name("CDW5"), aml_int(0x1), aml_name("CDW5")));
+ aml_append(if_uuid, if_cxl);
+
+ aml_append(if_uuid, aml_return(aml_arg(3)));
+ aml_append(method, if_uuid);
+
+ /*
+ * If no UUID matched, return Unrecognized UUID via Arg3 DWord 1
+ * ACPI 6.4 - 6.2.11
+ * Unrecognised UUID - BIT(2)
+ */
+ else_uuid = aml_else();
+
+ aml_append(else_uuid,
+ aml_or(aml_name("CDW1"), aml_int(0x4), aml_name("CDW1")));
+ aml_append(else_uuid, aml_return(aml_arg(3)));
+ aml_append(method, else_uuid);
+
+ return method;
+}
+
+void build_cxl_osc_method(Aml *dev)
+{
+ aml_append(dev, aml_name_decl("SUPP", aml_int(0)));
+ aml_append(dev, aml_name_decl("CTRL", aml_int(0)));
+ aml_append(dev, aml_name_decl("SUPC", aml_int(0)));
+ aml_append(dev, aml_name_decl("CTRC", aml_int(0)));
+ aml_append(dev, __build_cxl_osc_method());
+}
diff --git a/hw/acpi/meson.build b/hw/acpi/meson.build
index 8bea2e6933..cea2f5f93a 100644
--- a/hw/acpi/meson.build
+++ b/hw/acpi/meson.build
@@ -13,6 +13,7 @@ acpi_ss.add(when: 'CONFIG_ACPI_MEMORY_HOTPLUG', if_false: files('acpi-mem-hotplu
acpi_ss.add(when: 'CONFIG_ACPI_NVDIMM', if_true: files('nvdimm.c'))
acpi_ss.add(when: 'CONFIG_ACPI_NVDIMM', if_false: files('acpi-nvdimm-stub.c'))
acpi_ss.add(when: 'CONFIG_ACPI_PCI', if_true: files('pci.c'))
+acpi_ss.add(when: 'CONFIG_ACPI_CXL', if_true: files('cxl.c'), if_false: files('cxl-stub.c'))
acpi_ss.add(when: 'CONFIG_ACPI_VMGENID', if_true: files('vmgenid.c'))
acpi_ss.add(when: 'CONFIG_ACPI_HW_REDUCED', if_true: files('generic_event_device.c'))
acpi_ss.add(when: 'CONFIG_ACPI_HMAT', if_true: files('hmat.c'))
@@ -33,4 +34,5 @@ softmmu_ss.add_all(when: 'CONFIG_ACPI', if_true: acpi_ss)
softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('acpi-stub.c', 'aml-build-stub.c',
'acpi-x86-stub.c', 'ipmi-stub.c', 'ghes-stub.c',
'acpi-mem-hotplug-stub.c', 'acpi-cpu-hotplug-stub.c',
- 'acpi-pci-hotplug-stub.c', 'acpi-nvdimm-stub.c'))
+ 'acpi-pci-hotplug-stub.c', 'acpi-nvdimm-stub.c',
+ 'cxl-stub.c'))
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 2d81b0f40c..59ede8b2e9 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -67,6 +67,7 @@
#include "hw/acpi/aml-build.h"
#include "hw/acpi/utils.h"
#include "hw/acpi/pci.h"
+#include "hw/acpi/cxl.h"
#include "qom/qom-qobject.h"
#include "hw/i386/amd_iommu.h"
@@ -1582,11 +1583,15 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
aml_append(dev, aml_name_decl("_UID", aml_int(bus_num)));
aml_append(dev, aml_name_decl("_BBN", aml_int(bus_num)));
if (pci_bus_is_cxl(bus)) {
- aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
- aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
-
- /* Expander bridges do not have ACPI PCI Hot-plug enabled */
- aml_append(dev, build_q35_osc_method(true));
+ struct Aml *pkg = aml_package(2);
+
+ aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0016")));
+ aml_append(pkg, aml_eisaid("PNP0A08"));
+ aml_append(pkg, aml_eisaid("PNP0A03"));
+ aml_append(dev, aml_name_decl("_CID", pkg));
+ aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
+ aml_append(dev, aml_name_decl("_UID", aml_int(bus_num)));
+ build_cxl_osc_method(dev);
} else if (pci_bus_is_express(bus)) {
aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
diff --git a/include/hw/acpi/cxl.h b/include/hw/acpi/cxl.h
new file mode 100644
index 0000000000..7b8f3b8a2e
--- /dev/null
+++ b/include/hw/acpi/cxl.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2020 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_ACPI_CXL_H
+#define HW_ACPI_CXL_H
+
+void build_cxl_osc_method(Aml *dev);
+
+#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 25/45] acpi/cxl: Create the CEDT (9.14.1)
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
The CXL Early Discovery Table is defined in the CXL 2.0 specification as
a way for the OS to get CXL specific information from the system
firmware.
CXL 2.0 specification adds an _HID, ACPI0016, for CXL capable host
bridges, with a _CID of PNP0A08 (PCIe host bridge). CXL aware software
is able to use this initiate the proper _OSC method, and get the _UID
which is referenced by the CEDT. Therefore the existence of an ACPI0016
device allows a CXL aware driver perform the necessary actions. For a
CXL capable OS, this works. For a CXL unaware OS, this works.
CEDT awaremess requires more. The motivation for ACPI0017 is to provide
the possibility of having a Linux CXL module that can work on a legacy
Linux kernel. Linux core PCI/ACPI which won't be built as a module,
will see the _CID of PNP0A08 and bind a driver to it. If we later loaded
a driver for ACPI0016, Linux won't be able to bind it to the hardware
because it has already bound the PNP0A08 driver. The ACPI0017 device is
an opportunity to have an object to bind a driver will be used by a
Linux driver to walk the CXL topology and do everything that we would
have preferred to do with ACPI0016.
There is another motivation for an ACPI0017 device which isn't
implemented here. An operating system needs an attach point for a
non-volatile region provider that understands cross-hostbridge
interleaving. Since QEMU emulation doesn't support interleaving yet,
this is more important on the OS side, for now.
As of CXL 2.0 spec, only 1 sub structure is defined, the CXL Host Bridge
Structure (CHBS) which is primarily useful for telling the OS exactly
where the MMIO for the host bridge is.
Link: https://lore.kernel.org/linux-cxl/20210115034911.nkgpzc756d6qmjpl@intel.com/T/#t
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/acpi/cxl.c | 68 +++++++++++++++++++++++++++++
hw/i386/acpi-build.c | 27 ++++++++++++
hw/pci-bridge/pci_expander_bridge.c | 17 --------
include/hw/acpi/cxl.h | 5 +++
include/hw/pci/pci_bridge.h | 20 +++++++++
5 files changed, 120 insertions(+), 17 deletions(-)
diff --git a/hw/acpi/cxl.c b/hw/acpi/cxl.c
index ca1f04f359..aa4af86a4c 100644
--- a/hw/acpi/cxl.c
+++ b/hw/acpi/cxl.c
@@ -18,7 +18,11 @@
*/
#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pci_host.h"
#include "hw/cxl/cxl.h"
+#include "hw/mem/memory-device.h"
#include "hw/acpi/acpi.h"
#include "hw/acpi/aml-build.h"
#include "hw/acpi/bios-linker-loader.h"
@@ -26,6 +30,70 @@
#include "qapi/error.h"
#include "qemu/uuid.h"
+static void cedt_build_chbs(GArray *table_data, PXBDev *cxl)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(cxl->cxl.cxl_host_bridge);
+ struct MemoryRegion *mr = sbd->mmio[0].memory;
+
+ /* Type */
+ build_append_int_noprefix(table_data, 0, 1);
+
+ /* Reserved */
+ build_append_int_noprefix(table_data, 0, 1);
+
+ /* Record Length */
+ build_append_int_noprefix(table_data, 32, 2);
+
+ /* UID - currently equal to bus number */
+ build_append_int_noprefix(table_data, cxl->bus_nr, 4);
+
+ /* Version */
+ build_append_int_noprefix(table_data, 1, 4);
+
+ /* Reserved */
+ build_append_int_noprefix(table_data, 0, 4);
+
+ /* Base - subregion within a container that is in PA space */
+ build_append_int_noprefix(table_data, mr->container->addr + mr->addr, 8);
+
+ /* Length */
+ build_append_int_noprefix(table_data, memory_region_size(mr), 8);
+}
+
+static int cxl_foreach_pxb_hb(Object *obj, void *opaque)
+{
+ Aml *cedt = opaque;
+
+ if (object_dynamic_cast(obj, TYPE_PXB_CXL_DEVICE)) {
+ cedt_build_chbs(cedt->buf, PXB_CXL_DEV(obj));
+ }
+
+ return 0;
+}
+
+void cxl_build_cedt(MachineState *ms, GArray *table_offsets, GArray *table_data,
+ BIOSLinker *linker, const char *oem_id,
+ const char *oem_table_id)
+{
+ Aml *cedt;
+ AcpiTable table = { .sig = "CEDT", .rev = 1, .oem_id = oem_id,
+ .oem_table_id = oem_table_id };
+
+ acpi_add_table(table_offsets, table_data);
+ acpi_table_begin(&table, table_data);
+ cedt = init_aml_allocator();
+
+ /* reserve space for CEDT header */
+
+ object_child_foreach_recursive(object_get_root(), cxl_foreach_pxb_hb, cedt);
+
+ /* copy AML table into ACPI tables blob and patch header there */
+ g_array_append_vals(table_data, cedt->buf->data, cedt->buf->len);
+ free_aml_allocator();
+
+ acpi_table_end(linker, &table);
+}
+
static Aml *__build_cxl_osc_method(void)
{
Aml *method, *if_uuid, *else_uuid, *if_arg1_not_1, *if_cxl, *if_caps_masked;
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 59ede8b2e9..c125939ed6 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -77,6 +77,7 @@
#include "hw/acpi/ipmi.h"
#include "hw/acpi/hmat.h"
#include "hw/acpi/viot.h"
+#include "hw/acpi/cxl.h"
#include CONFIG_DEVICES
@@ -1411,6 +1412,22 @@ static void build_smb0(Aml *table, I2CBus *smbus, int devnr, int func)
aml_append(table, scope);
}
+static void build_acpi0017(Aml *table)
+{
+ Aml *dev, *scope, *method;
+
+ scope = aml_scope("_SB");
+ dev = aml_device("CXLM");
+ aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0017")));
+
+ method = aml_method("_STA", 0, AML_NOTSERIALIZED);
+ aml_append(method, aml_return(aml_int(0x01)));
+ aml_append(dev, method);
+
+ aml_append(scope, dev);
+ aml_append(table, scope);
+}
+
static void
build_dsdt(GArray *table_data, BIOSLinker *linker,
AcpiPmInfo *pm, AcpiMiscInfo *misc,
@@ -1430,6 +1447,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
#ifdef CONFIG_TPM
TPMIf *tpm = tpm_find();
#endif
+ bool cxl_present = false;
int i;
VMBusBridge *vmbus_bridge = vmbus_bridge_find();
AcpiTable table = { .sig = "DSDT", .rev = 1, .oem_id = x86ms->oem_id,
@@ -1618,12 +1636,17 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
MemoryRegion *mr = &machine->cxl_devices_state->host_mr;
uint64_t base = mr->addr;
+ cxl_present = true;
crs_range_insert(crs_range_set.mem_ranges, base,
base + memory_region_size(mr) - 1);
}
}
}
+ if (cxl_present) {
+ build_acpi0017(dsdt);
+ }
+
/*
* At this point crs_range_set has all the ranges used by pci
* busses *other* than PCI0. These ranges will be excluded from
@@ -2688,6 +2711,10 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
machine->nvdimms_state, machine->ram_slots,
x86ms->oem_id, x86ms->oem_table_id);
}
+ if (machine->cxl_devices_state->is_enabled) {
+ cxl_build_cedt(machine, table_offsets, tables_blob, tables->linker,
+ x86ms->oem_id, x86ms->oem_table_id);
+ }
acpi_add_table(table_offsets, tables_blob);
build_waet(tables_blob, tables->linker, x86ms->oem_id, x86ms->oem_table_id);
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index 8fb4f2ea91..22feda1ff0 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -57,23 +57,6 @@ DECLARE_INSTANCE_CHECKER(PXBDev, PXB_DEV,
DECLARE_INSTANCE_CHECKER(PXBDev, PXB_PCIE_DEV,
TYPE_PXB_PCIE_DEVICE)
-#define TYPE_PXB_CXL_DEVICE "pxb-cxl"
-DECLARE_INSTANCE_CHECKER(PXBDev, PXB_CXL_DEV,
- TYPE_PXB_CXL_DEVICE)
-
-struct PXBDev {
- /*< private >*/
- PCIDevice parent_obj;
- /*< public >*/
-
- uint8_t bus_nr;
- uint16_t numa_node;
- bool bypass_iommu;
- struct cxl_dev {
- CXLHost *cxl_host_bridge;
- } cxl;
-};
-
static PXBDev *convert_to_pxb(PCIDevice *dev)
{
/* A CXL PXB's parent bus is PCIe, so the normal check won't work */
diff --git a/include/hw/acpi/cxl.h b/include/hw/acpi/cxl.h
index 7b8f3b8a2e..0c496538c0 100644
--- a/include/hw/acpi/cxl.h
+++ b/include/hw/acpi/cxl.h
@@ -18,6 +18,11 @@
#ifndef HW_ACPI_CXL_H
#define HW_ACPI_CXL_H
+#include "hw/acpi/bios-linker-loader.h"
+
+void cxl_build_cedt(MachineState *ms, GArray *table_offsets, GArray *table_data,
+ BIOSLinker *linker, const char *oem_id,
+ const char *oem_table_id);
void build_cxl_osc_method(Aml *dev);
#endif
diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h
index 30691a6e57..ba4bafac7c 100644
--- a/include/hw/pci/pci_bridge.h
+++ b/include/hw/pci/pci_bridge.h
@@ -28,6 +28,7 @@
#include "hw/pci/pci.h"
#include "hw/pci/pci_bus.h"
+#include "hw/cxl/cxl.h"
#include "qom/object.h"
typedef struct PCIBridgeWindows PCIBridgeWindows;
@@ -80,6 +81,25 @@ struct PCIBridge {
#define PCI_BRIDGE_DEV_PROP_CHASSIS_NR "chassis_nr"
#define PCI_BRIDGE_DEV_PROP_MSI "msi"
#define PCI_BRIDGE_DEV_PROP_SHPC "shpc"
+typedef struct CXLHost CXLHost;
+
+struct PXBDev {
+ /*< private >*/
+ PCIDevice parent_obj;
+ /*< public >*/
+
+ uint8_t bus_nr;
+ uint16_t numa_node;
+ bool bypass_iommu;
+ struct cxl_dev {
+ CXLHost *cxl_host_bridge; /* Pointer to a CXLHost */
+ } cxl;
+};
+
+typedef struct PXBDev PXBDev;
+#define TYPE_PXB_CXL_DEVICE "pxb-cxl"
+DECLARE_INSTANCE_CHECKER(PXBDev, PXB_CXL_DEV,
+ TYPE_PXB_CXL_DEVICE)
int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset,
uint16_t svid, uint16_t ssid,
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 25/45] acpi/cxl: Create the CEDT (9.14.1)
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
The CXL Early Discovery Table is defined in the CXL 2.0 specification as
a way for the OS to get CXL specific information from the system
firmware.
CXL 2.0 specification adds an _HID, ACPI0016, for CXL capable host
bridges, with a _CID of PNP0A08 (PCIe host bridge). CXL aware software
is able to use this initiate the proper _OSC method, and get the _UID
which is referenced by the CEDT. Therefore the existence of an ACPI0016
device allows a CXL aware driver perform the necessary actions. For a
CXL capable OS, this works. For a CXL unaware OS, this works.
CEDT awaremess requires more. The motivation for ACPI0017 is to provide
the possibility of having a Linux CXL module that can work on a legacy
Linux kernel. Linux core PCI/ACPI which won't be built as a module,
will see the _CID of PNP0A08 and bind a driver to it. If we later loaded
a driver for ACPI0016, Linux won't be able to bind it to the hardware
because it has already bound the PNP0A08 driver. The ACPI0017 device is
an opportunity to have an object to bind a driver will be used by a
Linux driver to walk the CXL topology and do everything that we would
have preferred to do with ACPI0016.
There is another motivation for an ACPI0017 device which isn't
implemented here. An operating system needs an attach point for a
non-volatile region provider that understands cross-hostbridge
interleaving. Since QEMU emulation doesn't support interleaving yet,
this is more important on the OS side, for now.
As of CXL 2.0 spec, only 1 sub structure is defined, the CXL Host Bridge
Structure (CHBS) which is primarily useful for telling the OS exactly
where the MMIO for the host bridge is.
Link: https://lore.kernel.org/linux-cxl/20210115034911.nkgpzc756d6qmjpl@intel.com/T/#t
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/acpi/cxl.c | 68 +++++++++++++++++++++++++++++
hw/i386/acpi-build.c | 27 ++++++++++++
hw/pci-bridge/pci_expander_bridge.c | 17 --------
include/hw/acpi/cxl.h | 5 +++
include/hw/pci/pci_bridge.h | 20 +++++++++
5 files changed, 120 insertions(+), 17 deletions(-)
diff --git a/hw/acpi/cxl.c b/hw/acpi/cxl.c
index ca1f04f359..aa4af86a4c 100644
--- a/hw/acpi/cxl.c
+++ b/hw/acpi/cxl.c
@@ -18,7 +18,11 @@
*/
#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pci_host.h"
#include "hw/cxl/cxl.h"
+#include "hw/mem/memory-device.h"
#include "hw/acpi/acpi.h"
#include "hw/acpi/aml-build.h"
#include "hw/acpi/bios-linker-loader.h"
@@ -26,6 +30,70 @@
#include "qapi/error.h"
#include "qemu/uuid.h"
+static void cedt_build_chbs(GArray *table_data, PXBDev *cxl)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(cxl->cxl.cxl_host_bridge);
+ struct MemoryRegion *mr = sbd->mmio[0].memory;
+
+ /* Type */
+ build_append_int_noprefix(table_data, 0, 1);
+
+ /* Reserved */
+ build_append_int_noprefix(table_data, 0, 1);
+
+ /* Record Length */
+ build_append_int_noprefix(table_data, 32, 2);
+
+ /* UID - currently equal to bus number */
+ build_append_int_noprefix(table_data, cxl->bus_nr, 4);
+
+ /* Version */
+ build_append_int_noprefix(table_data, 1, 4);
+
+ /* Reserved */
+ build_append_int_noprefix(table_data, 0, 4);
+
+ /* Base - subregion within a container that is in PA space */
+ build_append_int_noprefix(table_data, mr->container->addr + mr->addr, 8);
+
+ /* Length */
+ build_append_int_noprefix(table_data, memory_region_size(mr), 8);
+}
+
+static int cxl_foreach_pxb_hb(Object *obj, void *opaque)
+{
+ Aml *cedt = opaque;
+
+ if (object_dynamic_cast(obj, TYPE_PXB_CXL_DEVICE)) {
+ cedt_build_chbs(cedt->buf, PXB_CXL_DEV(obj));
+ }
+
+ return 0;
+}
+
+void cxl_build_cedt(MachineState *ms, GArray *table_offsets, GArray *table_data,
+ BIOSLinker *linker, const char *oem_id,
+ const char *oem_table_id)
+{
+ Aml *cedt;
+ AcpiTable table = { .sig = "CEDT", .rev = 1, .oem_id = oem_id,
+ .oem_table_id = oem_table_id };
+
+ acpi_add_table(table_offsets, table_data);
+ acpi_table_begin(&table, table_data);
+ cedt = init_aml_allocator();
+
+ /* reserve space for CEDT header */
+
+ object_child_foreach_recursive(object_get_root(), cxl_foreach_pxb_hb, cedt);
+
+ /* copy AML table into ACPI tables blob and patch header there */
+ g_array_append_vals(table_data, cedt->buf->data, cedt->buf->len);
+ free_aml_allocator();
+
+ acpi_table_end(linker, &table);
+}
+
static Aml *__build_cxl_osc_method(void)
{
Aml *method, *if_uuid, *else_uuid, *if_arg1_not_1, *if_cxl, *if_caps_masked;
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 59ede8b2e9..c125939ed6 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -77,6 +77,7 @@
#include "hw/acpi/ipmi.h"
#include "hw/acpi/hmat.h"
#include "hw/acpi/viot.h"
+#include "hw/acpi/cxl.h"
#include CONFIG_DEVICES
@@ -1411,6 +1412,22 @@ static void build_smb0(Aml *table, I2CBus *smbus, int devnr, int func)
aml_append(table, scope);
}
+static void build_acpi0017(Aml *table)
+{
+ Aml *dev, *scope, *method;
+
+ scope = aml_scope("_SB");
+ dev = aml_device("CXLM");
+ aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0017")));
+
+ method = aml_method("_STA", 0, AML_NOTSERIALIZED);
+ aml_append(method, aml_return(aml_int(0x01)));
+ aml_append(dev, method);
+
+ aml_append(scope, dev);
+ aml_append(table, scope);
+}
+
static void
build_dsdt(GArray *table_data, BIOSLinker *linker,
AcpiPmInfo *pm, AcpiMiscInfo *misc,
@@ -1430,6 +1447,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
#ifdef CONFIG_TPM
TPMIf *tpm = tpm_find();
#endif
+ bool cxl_present = false;
int i;
VMBusBridge *vmbus_bridge = vmbus_bridge_find();
AcpiTable table = { .sig = "DSDT", .rev = 1, .oem_id = x86ms->oem_id,
@@ -1618,12 +1636,17 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
MemoryRegion *mr = &machine->cxl_devices_state->host_mr;
uint64_t base = mr->addr;
+ cxl_present = true;
crs_range_insert(crs_range_set.mem_ranges, base,
base + memory_region_size(mr) - 1);
}
}
}
+ if (cxl_present) {
+ build_acpi0017(dsdt);
+ }
+
/*
* At this point crs_range_set has all the ranges used by pci
* busses *other* than PCI0. These ranges will be excluded from
@@ -2688,6 +2711,10 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
machine->nvdimms_state, machine->ram_slots,
x86ms->oem_id, x86ms->oem_table_id);
}
+ if (machine->cxl_devices_state->is_enabled) {
+ cxl_build_cedt(machine, table_offsets, tables_blob, tables->linker,
+ x86ms->oem_id, x86ms->oem_table_id);
+ }
acpi_add_table(table_offsets, tables_blob);
build_waet(tables_blob, tables->linker, x86ms->oem_id, x86ms->oem_table_id);
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index 8fb4f2ea91..22feda1ff0 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -57,23 +57,6 @@ DECLARE_INSTANCE_CHECKER(PXBDev, PXB_DEV,
DECLARE_INSTANCE_CHECKER(PXBDev, PXB_PCIE_DEV,
TYPE_PXB_PCIE_DEVICE)
-#define TYPE_PXB_CXL_DEVICE "pxb-cxl"
-DECLARE_INSTANCE_CHECKER(PXBDev, PXB_CXL_DEV,
- TYPE_PXB_CXL_DEVICE)
-
-struct PXBDev {
- /*< private >*/
- PCIDevice parent_obj;
- /*< public >*/
-
- uint8_t bus_nr;
- uint16_t numa_node;
- bool bypass_iommu;
- struct cxl_dev {
- CXLHost *cxl_host_bridge;
- } cxl;
-};
-
static PXBDev *convert_to_pxb(PCIDevice *dev)
{
/* A CXL PXB's parent bus is PCIe, so the normal check won't work */
diff --git a/include/hw/acpi/cxl.h b/include/hw/acpi/cxl.h
index 7b8f3b8a2e..0c496538c0 100644
--- a/include/hw/acpi/cxl.h
+++ b/include/hw/acpi/cxl.h
@@ -18,6 +18,11 @@
#ifndef HW_ACPI_CXL_H
#define HW_ACPI_CXL_H
+#include "hw/acpi/bios-linker-loader.h"
+
+void cxl_build_cedt(MachineState *ms, GArray *table_offsets, GArray *table_data,
+ BIOSLinker *linker, const char *oem_id,
+ const char *oem_table_id);
void build_cxl_osc_method(Aml *dev);
#endif
diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h
index 30691a6e57..ba4bafac7c 100644
--- a/include/hw/pci/pci_bridge.h
+++ b/include/hw/pci/pci_bridge.h
@@ -28,6 +28,7 @@
#include "hw/pci/pci.h"
#include "hw/pci/pci_bus.h"
+#include "hw/cxl/cxl.h"
#include "qom/object.h"
typedef struct PCIBridgeWindows PCIBridgeWindows;
@@ -80,6 +81,25 @@ struct PCIBridge {
#define PCI_BRIDGE_DEV_PROP_CHASSIS_NR "chassis_nr"
#define PCI_BRIDGE_DEV_PROP_MSI "msi"
#define PCI_BRIDGE_DEV_PROP_SHPC "shpc"
+typedef struct CXLHost CXLHost;
+
+struct PXBDev {
+ /*< private >*/
+ PCIDevice parent_obj;
+ /*< public >*/
+
+ uint8_t bus_nr;
+ uint16_t numa_node;
+ bool bypass_iommu;
+ struct cxl_dev {
+ CXLHost *cxl_host_bridge; /* Pointer to a CXLHost */
+ } cxl;
+};
+
+typedef struct PXBDev PXBDev;
+#define TYPE_PXB_CXL_DEVICE "pxb-cxl"
+DECLARE_INSTANCE_CHECKER(PXBDev, PXB_CXL_DEV,
+ TYPE_PXB_CXL_DEVICE)
int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset,
uint16_t svid, uint16_t ssid,
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 26/45] hw/cxl/component: Add utils for interleave parameter encoding/decoding
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
Both registers and the CFMWS entries in CDAT use simple encodings
for the number of interleave ways and the interleave granularity.
Introduce simple conversion functions to/from the unencoded
number / size. So far the iw decode has not been needed so is
it not implemented.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-component-utils.c | 34 ++++++++++++++++++++++++++++++++++
include/hw/cxl/cxl_component.h | 8 ++++++++
2 files changed, 42 insertions(+)
diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
index afc97b17c2..69cb07171c 100644
--- a/hw/cxl/cxl-component-utils.c
+++ b/hw/cxl/cxl-component-utils.c
@@ -9,6 +9,7 @@
#include "qemu/osdep.h"
#include "qemu/log.h"
+#include "qapi/error.h"
#include "hw/pci/pci.h"
#include "hw/cxl/cxl.h"
@@ -329,3 +330,36 @@ void cxl_component_create_dvsec(CXLComponentState *cxl,
range_init_nofail(&cxl->dvsecs[type], cxl->dvsec_offset, length);
cxl->dvsec_offset += length;
}
+
+uint8_t cxl_interleave_ways_enc(int iw, Error **errp)
+{
+ switch (iw) {
+ case 1: return 0x0;
+ case 2: return 0x1;
+ case 4: return 0x2;
+ case 8: return 0x3;
+ case 16: return 0x4;
+ case 3: return 0x8;
+ case 6: return 0x9;
+ case 12: return 0xa;
+ default:
+ error_setg(errp, "Interleave ways: %d not supported", iw);
+ return 0;
+ }
+}
+
+uint8_t cxl_interleave_granularity_enc(uint64_t gran, Error **errp)
+{
+ switch (gran) {
+ case 256: return 0;
+ case 512: return 1;
+ case 1024: return 2;
+ case 2048: return 3;
+ case 4096: return 4;
+ case 8192: return 5;
+ case 16384: return 6;
+ default:
+ error_setg(errp, "Interleave granularity: %" PRIu64 " invalid", gran);
+ return 0;
+ }
+}
diff --git a/include/hw/cxl/cxl_component.h b/include/hw/cxl/cxl_component.h
index 7d8f395cbe..4f69688c47 100644
--- a/include/hw/cxl/cxl_component.h
+++ b/include/hw/cxl/cxl_component.h
@@ -210,4 +210,12 @@ static inline int cxl_decoder_count_enc(int count)
return 0;
}
+uint8_t cxl_interleave_ways_enc(int iw, Error **errp);
+uint8_t cxl_interleave_granularity_enc(uint64_t gran, Error **errp);
+
+static inline hwaddr cxl_decode_ig(int ig)
+{
+ return 1 << (ig + 8);
+}
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 26/45] hw/cxl/component: Add utils for interleave parameter encoding/decoding
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
Both registers and the CFMWS entries in CDAT use simple encodings
for the number of interleave ways and the interleave granularity.
Introduce simple conversion functions to/from the unencoded
number / size. So far the iw decode has not been needed so is
it not implemented.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/cxl/cxl-component-utils.c | 34 ++++++++++++++++++++++++++++++++++
include/hw/cxl/cxl_component.h | 8 ++++++++
2 files changed, 42 insertions(+)
diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
index afc97b17c2..69cb07171c 100644
--- a/hw/cxl/cxl-component-utils.c
+++ b/hw/cxl/cxl-component-utils.c
@@ -9,6 +9,7 @@
#include "qemu/osdep.h"
#include "qemu/log.h"
+#include "qapi/error.h"
#include "hw/pci/pci.h"
#include "hw/cxl/cxl.h"
@@ -329,3 +330,36 @@ void cxl_component_create_dvsec(CXLComponentState *cxl,
range_init_nofail(&cxl->dvsecs[type], cxl->dvsec_offset, length);
cxl->dvsec_offset += length;
}
+
+uint8_t cxl_interleave_ways_enc(int iw, Error **errp)
+{
+ switch (iw) {
+ case 1: return 0x0;
+ case 2: return 0x1;
+ case 4: return 0x2;
+ case 8: return 0x3;
+ case 16: return 0x4;
+ case 3: return 0x8;
+ case 6: return 0x9;
+ case 12: return 0xa;
+ default:
+ error_setg(errp, "Interleave ways: %d not supported", iw);
+ return 0;
+ }
+}
+
+uint8_t cxl_interleave_granularity_enc(uint64_t gran, Error **errp)
+{
+ switch (gran) {
+ case 256: return 0;
+ case 512: return 1;
+ case 1024: return 2;
+ case 2048: return 3;
+ case 4096: return 4;
+ case 8192: return 5;
+ case 16384: return 6;
+ default:
+ error_setg(errp, "Interleave granularity: %" PRIu64 " invalid", gran);
+ return 0;
+ }
+}
diff --git a/include/hw/cxl/cxl_component.h b/include/hw/cxl/cxl_component.h
index 7d8f395cbe..4f69688c47 100644
--- a/include/hw/cxl/cxl_component.h
+++ b/include/hw/cxl/cxl_component.h
@@ -210,4 +210,12 @@ static inline int cxl_decoder_count_enc(int count)
return 0;
}
+uint8_t cxl_interleave_ways_enc(int iw, Error **errp);
+uint8_t cxl_interleave_granularity_enc(uint64_t gran, Error **errp);
+
+static inline hwaddr cxl_decode_ig(int ig)
+{
+ return 1 << (ig + 8);
+}
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 27/45] hw/cxl/host: Add support for CXL Fixed Memory Windows.
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
---
hw/cxl/cxl-host-stubs.c | 14 ++++++
hw/cxl/cxl-host.c | 94 +++++++++++++++++++++++++++++++++++++++++
hw/cxl/meson.build | 6 +++
include/hw/cxl/cxl.h | 21 +++++++++
qapi/machine.json | 21 +++++++++
qemu-options.hx | 38 +++++++++++++++++
softmmu/vl.c | 47 +++++++++++++++++++++
7 files changed, 241 insertions(+)
diff --git a/hw/cxl/cxl-host-stubs.c b/hw/cxl/cxl-host-stubs.c
new file mode 100644
index 0000000000..f8fd278d5d
--- /dev/null
+++ b/hw/cxl/cxl-host-stubs.c
@@ -0,0 +1,14 @@
+/*
+ * CXL host parameter parsing routine stubs
+ *
+ * Copyright (c) 2022 Huawei
+ */
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/cxl/cxl.h"
+
+void cxl_fixed_memory_window_config(MachineState *ms,
+ CXLFixedMemoryWindowOptions *object,
+ Error **errp) {};
+
+void cxl_fixed_memory_window_link_targets(Error **errp) {};
diff --git a/hw/cxl/cxl-host.c b/hw/cxl/cxl-host.c
new file mode 100644
index 0000000000..ec5a75cbf5
--- /dev/null
+++ b/hw/cxl/cxl-host.c
@@ -0,0 +1,94 @@
+/*
+ * CXL host parameter parsing routines
+ *
+ * Copyright (c) 2022 Huawei
+ * Modeled loosely on the NUMA options handling in hw/core/numa.c
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qemu/bitmap.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include "sysemu/qtest.h"
+#include "hw/boards.h"
+
+#include "qapi/qapi-visit-machine.h"
+#include "hw/cxl/cxl.h"
+
+void cxl_fixed_memory_window_config(MachineState *ms,
+ CXLFixedMemoryWindowOptions *object,
+ Error **errp)
+{
+ CXLFixedWindow *fw = g_malloc0(sizeof(*fw));
+ strList *target;
+ int i;
+
+ for (target = object->targets; target; target = target->next) {
+ fw->num_targets++;
+ }
+
+ fw->enc_int_ways = cxl_interleave_ways_enc(fw->num_targets, errp);
+ if (*errp) {
+ return;
+ }
+
+ fw->targets = g_malloc0_n(fw->num_targets, sizeof(*fw->targets));
+ for (i = 0, target = object->targets; target; i++, target = target->next) {
+ /* This link cannot be resolved yet, so stash the name for now */
+ fw->targets[i] = g_strdup(target->value);
+ }
+
+ if (object->size % (256 * MiB)) {
+ error_setg(errp,
+ "Size of a CXL fixed memory window must my a multiple of 256MiB");
+ return;
+ }
+ fw->size = object->size;
+
+ if (object->has_interleave_granularity) {
+ fw->enc_int_gran =
+ cxl_interleave_granularity_enc(object->interleave_granularity,
+ errp);
+ if (*errp) {
+ return;
+ }
+ } else {
+ /* Default to 256 byte interleave */
+ fw->enc_int_gran = 0;
+ }
+
+ ms->cxl_devices_state->fixed_windows =
+ g_list_append(ms->cxl_devices_state->fixed_windows, fw);
+
+ return;
+}
+
+void cxl_fixed_memory_window_link_targets(Error **errp)
+{
+ MachineState *ms = MACHINE(qdev_get_machine());
+
+ if (ms->cxl_devices_state && ms->cxl_devices_state->fixed_windows) {
+ GList *it;
+
+ for (it = ms->cxl_devices_state->fixed_windows; it; it = it->next) {
+ CXLFixedWindow *fw = it->data;
+ int i;
+
+ for (i = 0; i < fw->num_targets; i++) {
+ Object *o;
+ bool ambig;
+
+ o = object_resolve_path_type(fw->targets[i],
+ TYPE_PXB_CXL_DEVICE,
+ &ambig);
+ if (!o) {
+ error_setg(errp, "Could not resolve CXLFM target %s",
+ fw->targets[i]);
+ return;
+ }
+ fw->target_hbs[i] = PXB_CXL_DEV(o);
+ }
+ }
+ }
+}
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
index e68eea2358..f117b99949 100644
--- a/hw/cxl/meson.build
+++ b/hw/cxl/meson.build
@@ -3,4 +3,10 @@ softmmu_ss.add(when: 'CONFIG_CXL',
'cxl-component-utils.c',
'cxl-device-utils.c',
'cxl-mailbox-utils.c',
+ 'cxl-host.c',
+ ),
+ if_false: files(
+ 'cxl-host-stubs.c',
))
+
+softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('cxl-host-stubs.c'))
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 8d1a7245d0..dce38124db 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -10,6 +10,9 @@
#ifndef CXL_H
#define CXL_H
+
+#include "qapi/qapi-types-machine.h"
+#include "hw/pci/pci_bridge.h"
#include "hw/pci/pci_host.h"
#include "cxl_pci.h"
#include "cxl_component.h"
@@ -20,10 +23,23 @@
#define CXL_WINDOW_MAX 10
+typedef struct CXLFixedWindow {
+ uint64_t size;
+ char **targets;
+ struct PXBDev *target_hbs[8];
+ uint8_t num_targets;
+ uint8_t enc_int_ways;
+ uint8_t enc_int_gran;
+ /* Todo: XOR based interleaving */
+ MemoryRegion mr;
+ hwaddr base;
+} CXLFixedWindow;
+
typedef struct CXLState {
bool is_enabled;
MemoryRegion host_mr;
unsigned int next_mr_idx;
+ GList *fixed_windows;
} CXLState;
struct CXLHost {
@@ -35,4 +51,9 @@ struct CXLHost {
#define TYPE_PXB_CXL_HOST "pxb-cxl-host"
OBJECT_DECLARE_SIMPLE_TYPE(CXLHost, PXB_CXL_HOST)
+void cxl_fixed_memory_window_config(MachineState *ms,
+ CXLFixedMemoryWindowOptions *object,
+ Error **errp);
+void cxl_fixed_memory_window_link_targets(Error **errp);
+
#endif
diff --git a/qapi/machine.json b/qapi/machine.json
index d25a481ce4..b22c27f196 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -502,6 +502,27 @@
'dst': 'uint16',
'val': 'uint8' }}
+##
+# @CXLFixedMemoryWindowOptions:
+#
+# Create a CXL Fixed Memory Window
+#
+# @size: Size of the Fixed Memory Window in bytes. Must be a multiple
+# of 256MiB.
+# @interleave-granularity: Number of contiguous bytes for which
+# accesses will go to a given interleave target.
+# Accepted values [256, 512, 1k, 2k, 4k, 8k, 16k]
+# @targets: Target root bridge IDs from -device ...,id=<ID> for each root
+# bridge.
+#
+# Since 7.1
+##
+{ 'struct': 'CXLFixedMemoryWindowOptions',
+ 'data': {
+ 'size': 'size',
+ '*interleave-granularity': 'size',
+ 'targets': ['str'] }}
+
##
# @X86CPURegister32:
#
diff --git a/qemu-options.hx b/qemu-options.hx
index 1764eebfaf..841896380e 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -467,6 +467,44 @@ SRST
-numa hmat-cache,node-id=1,size=10K,level=1,associativity=direct,policy=write-back,line=8
ERST
+DEF("cxl-fixed-memory-window", HAS_ARG, QEMU_OPTION_cxl_fixed_memory_window,
+ "-cxl-fixed-memory-window targets.0=firsttarget,targets.1=secondtarget,size=size[,interleave-granularity=granularity]\n",
+ QEMU_ARCH_ALL)
+SRST
+``-cxl-fixed-memory-window targets.0=firsttarget,targets.1=secondtarget,size=size[,interleave-granularity=granularity]``
+ Define a CXL Fixed Memory Window (CFMW).
+
+ Described in the CXL 2.0 ECN: CEDT CFMWS & QTG _DSM.
+
+ They are regions of Host Physical Addresses (HPA) on a system which
+ may be interleaved across one or more CXL host bridges. The system
+ software will assign particular devices into these windows and
+ configure the downstream Host-managed Device Memory (HDM) decoders
+ in root ports, switch ports and devices appropriately to meet the
+ interleave requirements before enabling the memory devices.
+
+ ``targets.X=firsttarget`` provides the mapping to CXL host bridges
+ which may be identified by the id provied in the -device entry.
+ Multiple entries are needed to specify all the targets when
+ the fixed memory window represents interleaved memory. X is the
+ target index from 0.
+
+ ``size=size`` sets the size of the CFMW. This must be a multiple of
+ 256MiB. The region will be aligned to 256MiB but the location is
+ platform and configuration dependent.
+
+ ``interleave-granularity=granularity`` sets the granularity of
+ interleave. Default 256KiB. Only 256KiB, 512KiB, 1024KiB, 2048KiB
+ 4096KiB, 8192KiB and 16384KiB granularities supported.
+
+ Example:
+
+ ::
+
+ -cxl-fixed-memory-window targets.0=cxl.0,targets.1=cxl.1,size=128G,interleave-granularity=512k
+
+ERST
+
DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd,
"-add-fd fd=fd,set=set[,opaque=opaque]\n"
" Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL)
diff --git a/softmmu/vl.c b/softmmu/vl.c
index 06a0e342fe..debf0d600e 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -93,6 +93,7 @@
#include "qemu/config-file.h"
#include "qemu/qemu-options.h"
#include "qemu/main-loop.h"
+#include "hw/cxl/cxl.h"
#ifdef CONFIG_VIRTFS
#include "fsdev/qemu-fsdev.h"
#endif
@@ -118,6 +119,7 @@
#include "qapi/qapi-events-run-state.h"
#include "qapi/qapi-visit-block-core.h"
#include "qapi/qapi-visit-compat.h"
+#include "qapi/qapi-visit-machine.h"
#include "qapi/qapi-visit-ui.h"
#include "qapi/qapi-commands-block-core.h"
#include "qapi/qapi-commands-migration.h"
@@ -143,6 +145,12 @@ typedef struct BlockdevOptionsQueueEntry {
typedef QSIMPLEQ_HEAD(, BlockdevOptionsQueueEntry) BlockdevOptionsQueue;
+typedef struct CXLFMWOptionQueueEntry {
+ CXLFixedMemoryWindowOptions *opts;
+ Location loc;
+ QSIMPLEQ_ENTRY(CXLFMWOptionQueueEntry) entry;
+} CXLFMWOptionQueueEntry;
+
typedef struct ObjectOption {
ObjectOptions *opts;
QTAILQ_ENTRY(ObjectOption) next;
@@ -169,6 +177,8 @@ static int snapshot;
static bool preconfig_requested;
static QemuPluginList plugin_list = QTAILQ_HEAD_INITIALIZER(plugin_list);
static BlockdevOptionsQueue bdo_queue = QSIMPLEQ_HEAD_INITIALIZER(bdo_queue);
+static QSIMPLEQ_HEAD(, CXLFMWOptionQueueEntry) CXLFMW_opts =
+ QSIMPLEQ_HEAD_INITIALIZER(CXLFMW_opts);
static bool nographic = false;
static int mem_prealloc; /* force preallocation of physical target memory */
static ram_addr_t ram_size;
@@ -1152,6 +1162,24 @@ static void parse_display(const char *p)
}
}
+static void parse_cxl_fixed_memory_window(const char *optarg)
+{
+ CXLFMWOptionQueueEntry *cfmws_entry;
+ Visitor *v;
+
+ v = qobject_input_visitor_new_str(optarg, "cxl-fixed-memory-window",
+ &error_fatal);
+ cfmws_entry = g_new(CXLFMWOptionQueueEntry, 1);
+ visit_type_CXLFixedMemoryWindowOptions(v, NULL, &cfmws_entry->opts,
+ &error_fatal);
+ if (!cfmws_entry->opts) {
+ exit(1);
+ }
+ visit_free(v);
+ loc_save(&cfmws_entry->loc);
+ QSIMPLEQ_INSERT_TAIL(&CXLFMW_opts, cfmws_entry, entry);
+}
+
static inline bool nonempty_str(const char *str)
{
return str && *str;
@@ -2023,6 +2051,20 @@ static void qemu_create_late_backends(void)
qemu_semihosting_console_init();
}
+static void cxl_set_opts(void)
+{
+ while (!QSIMPLEQ_EMPTY(&CXLFMW_opts)) {
+ CXLFMWOptionQueueEntry *cfmws_entry = QSIMPLEQ_FIRST(&CXLFMW_opts);
+
+ loc_restore(&cfmws_entry->loc);
+ QSIMPLEQ_REMOVE_HEAD(&CXLFMW_opts, entry);
+ cxl_fixed_memory_window_config(current_machine, cfmws_entry->opts,
+ &error_fatal);
+ qapi_free_CXLFixedMemoryWindowOptions(cfmws_entry->opts);
+ g_free(cfmws_entry);
+ }
+}
+
static bool have_custom_ram_size(void)
{
QemuOpts *opts = qemu_find_opts_singleton("memory");
@@ -2745,6 +2787,7 @@ void qmp_x_exit_preconfig(Error **errp)
qemu_init_board();
qemu_create_cli_devices();
+ cxl_fixed_memory_window_link_targets(errp);
qemu_machine_creation_done();
if (loadvm) {
@@ -2925,6 +2968,9 @@ void qemu_init(int argc, char **argv, char **envp)
exit(1);
}
break;
+ case QEMU_OPTION_cxl_fixed_memory_window:
+ parse_cxl_fixed_memory_window(optarg);
+ break;
case QEMU_OPTION_display:
parse_display(optarg);
break;
@@ -3764,6 +3810,7 @@ void qemu_init(int argc, char **argv, char **envp)
qemu_resolve_machine_memdev();
parse_numa_opts(current_machine);
+ cxl_set_opts();
if (vmstate_dump_file) {
/* dump and exit */
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 27/45] hw/cxl/host: Add support for CXL Fixed Memory Windows.
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
---
hw/cxl/cxl-host-stubs.c | 14 ++++++
hw/cxl/cxl-host.c | 94 +++++++++++++++++++++++++++++++++++++++++
hw/cxl/meson.build | 6 +++
include/hw/cxl/cxl.h | 21 +++++++++
qapi/machine.json | 21 +++++++++
qemu-options.hx | 38 +++++++++++++++++
softmmu/vl.c | 47 +++++++++++++++++++++
7 files changed, 241 insertions(+)
diff --git a/hw/cxl/cxl-host-stubs.c b/hw/cxl/cxl-host-stubs.c
new file mode 100644
index 0000000000..f8fd278d5d
--- /dev/null
+++ b/hw/cxl/cxl-host-stubs.c
@@ -0,0 +1,14 @@
+/*
+ * CXL host parameter parsing routine stubs
+ *
+ * Copyright (c) 2022 Huawei
+ */
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/cxl/cxl.h"
+
+void cxl_fixed_memory_window_config(MachineState *ms,
+ CXLFixedMemoryWindowOptions *object,
+ Error **errp) {};
+
+void cxl_fixed_memory_window_link_targets(Error **errp) {};
diff --git a/hw/cxl/cxl-host.c b/hw/cxl/cxl-host.c
new file mode 100644
index 0000000000..ec5a75cbf5
--- /dev/null
+++ b/hw/cxl/cxl-host.c
@@ -0,0 +1,94 @@
+/*
+ * CXL host parameter parsing routines
+ *
+ * Copyright (c) 2022 Huawei
+ * Modeled loosely on the NUMA options handling in hw/core/numa.c
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qemu/bitmap.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include "sysemu/qtest.h"
+#include "hw/boards.h"
+
+#include "qapi/qapi-visit-machine.h"
+#include "hw/cxl/cxl.h"
+
+void cxl_fixed_memory_window_config(MachineState *ms,
+ CXLFixedMemoryWindowOptions *object,
+ Error **errp)
+{
+ CXLFixedWindow *fw = g_malloc0(sizeof(*fw));
+ strList *target;
+ int i;
+
+ for (target = object->targets; target; target = target->next) {
+ fw->num_targets++;
+ }
+
+ fw->enc_int_ways = cxl_interleave_ways_enc(fw->num_targets, errp);
+ if (*errp) {
+ return;
+ }
+
+ fw->targets = g_malloc0_n(fw->num_targets, sizeof(*fw->targets));
+ for (i = 0, target = object->targets; target; i++, target = target->next) {
+ /* This link cannot be resolved yet, so stash the name for now */
+ fw->targets[i] = g_strdup(target->value);
+ }
+
+ if (object->size % (256 * MiB)) {
+ error_setg(errp,
+ "Size of a CXL fixed memory window must my a multiple of 256MiB");
+ return;
+ }
+ fw->size = object->size;
+
+ if (object->has_interleave_granularity) {
+ fw->enc_int_gran =
+ cxl_interleave_granularity_enc(object->interleave_granularity,
+ errp);
+ if (*errp) {
+ return;
+ }
+ } else {
+ /* Default to 256 byte interleave */
+ fw->enc_int_gran = 0;
+ }
+
+ ms->cxl_devices_state->fixed_windows =
+ g_list_append(ms->cxl_devices_state->fixed_windows, fw);
+
+ return;
+}
+
+void cxl_fixed_memory_window_link_targets(Error **errp)
+{
+ MachineState *ms = MACHINE(qdev_get_machine());
+
+ if (ms->cxl_devices_state && ms->cxl_devices_state->fixed_windows) {
+ GList *it;
+
+ for (it = ms->cxl_devices_state->fixed_windows; it; it = it->next) {
+ CXLFixedWindow *fw = it->data;
+ int i;
+
+ for (i = 0; i < fw->num_targets; i++) {
+ Object *o;
+ bool ambig;
+
+ o = object_resolve_path_type(fw->targets[i],
+ TYPE_PXB_CXL_DEVICE,
+ &ambig);
+ if (!o) {
+ error_setg(errp, "Could not resolve CXLFM target %s",
+ fw->targets[i]);
+ return;
+ }
+ fw->target_hbs[i] = PXB_CXL_DEV(o);
+ }
+ }
+ }
+}
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
index e68eea2358..f117b99949 100644
--- a/hw/cxl/meson.build
+++ b/hw/cxl/meson.build
@@ -3,4 +3,10 @@ softmmu_ss.add(when: 'CONFIG_CXL',
'cxl-component-utils.c',
'cxl-device-utils.c',
'cxl-mailbox-utils.c',
+ 'cxl-host.c',
+ ),
+ if_false: files(
+ 'cxl-host-stubs.c',
))
+
+softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('cxl-host-stubs.c'))
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 8d1a7245d0..dce38124db 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -10,6 +10,9 @@
#ifndef CXL_H
#define CXL_H
+
+#include "qapi/qapi-types-machine.h"
+#include "hw/pci/pci_bridge.h"
#include "hw/pci/pci_host.h"
#include "cxl_pci.h"
#include "cxl_component.h"
@@ -20,10 +23,23 @@
#define CXL_WINDOW_MAX 10
+typedef struct CXLFixedWindow {
+ uint64_t size;
+ char **targets;
+ struct PXBDev *target_hbs[8];
+ uint8_t num_targets;
+ uint8_t enc_int_ways;
+ uint8_t enc_int_gran;
+ /* Todo: XOR based interleaving */
+ MemoryRegion mr;
+ hwaddr base;
+} CXLFixedWindow;
+
typedef struct CXLState {
bool is_enabled;
MemoryRegion host_mr;
unsigned int next_mr_idx;
+ GList *fixed_windows;
} CXLState;
struct CXLHost {
@@ -35,4 +51,9 @@ struct CXLHost {
#define TYPE_PXB_CXL_HOST "pxb-cxl-host"
OBJECT_DECLARE_SIMPLE_TYPE(CXLHost, PXB_CXL_HOST)
+void cxl_fixed_memory_window_config(MachineState *ms,
+ CXLFixedMemoryWindowOptions *object,
+ Error **errp);
+void cxl_fixed_memory_window_link_targets(Error **errp);
+
#endif
diff --git a/qapi/machine.json b/qapi/machine.json
index d25a481ce4..b22c27f196 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -502,6 +502,27 @@
'dst': 'uint16',
'val': 'uint8' }}
+##
+# @CXLFixedMemoryWindowOptions:
+#
+# Create a CXL Fixed Memory Window
+#
+# @size: Size of the Fixed Memory Window in bytes. Must be a multiple
+# of 256MiB.
+# @interleave-granularity: Number of contiguous bytes for which
+# accesses will go to a given interleave target.
+# Accepted values [256, 512, 1k, 2k, 4k, 8k, 16k]
+# @targets: Target root bridge IDs from -device ...,id=<ID> for each root
+# bridge.
+#
+# Since 7.1
+##
+{ 'struct': 'CXLFixedMemoryWindowOptions',
+ 'data': {
+ 'size': 'size',
+ '*interleave-granularity': 'size',
+ 'targets': ['str'] }}
+
##
# @X86CPURegister32:
#
diff --git a/qemu-options.hx b/qemu-options.hx
index 1764eebfaf..841896380e 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -467,6 +467,44 @@ SRST
-numa hmat-cache,node-id=1,size=10K,level=1,associativity=direct,policy=write-back,line=8
ERST
+DEF("cxl-fixed-memory-window", HAS_ARG, QEMU_OPTION_cxl_fixed_memory_window,
+ "-cxl-fixed-memory-window targets.0=firsttarget,targets.1=secondtarget,size=size[,interleave-granularity=granularity]\n",
+ QEMU_ARCH_ALL)
+SRST
+``-cxl-fixed-memory-window targets.0=firsttarget,targets.1=secondtarget,size=size[,interleave-granularity=granularity]``
+ Define a CXL Fixed Memory Window (CFMW).
+
+ Described in the CXL 2.0 ECN: CEDT CFMWS & QTG _DSM.
+
+ They are regions of Host Physical Addresses (HPA) on a system which
+ may be interleaved across one or more CXL host bridges. The system
+ software will assign particular devices into these windows and
+ configure the downstream Host-managed Device Memory (HDM) decoders
+ in root ports, switch ports and devices appropriately to meet the
+ interleave requirements before enabling the memory devices.
+
+ ``targets.X=firsttarget`` provides the mapping to CXL host bridges
+ which may be identified by the id provied in the -device entry.
+ Multiple entries are needed to specify all the targets when
+ the fixed memory window represents interleaved memory. X is the
+ target index from 0.
+
+ ``size=size`` sets the size of the CFMW. This must be a multiple of
+ 256MiB. The region will be aligned to 256MiB but the location is
+ platform and configuration dependent.
+
+ ``interleave-granularity=granularity`` sets the granularity of
+ interleave. Default 256KiB. Only 256KiB, 512KiB, 1024KiB, 2048KiB
+ 4096KiB, 8192KiB and 16384KiB granularities supported.
+
+ Example:
+
+ ::
+
+ -cxl-fixed-memory-window targets.0=cxl.0,targets.1=cxl.1,size=128G,interleave-granularity=512k
+
+ERST
+
DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd,
"-add-fd fd=fd,set=set[,opaque=opaque]\n"
" Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL)
diff --git a/softmmu/vl.c b/softmmu/vl.c
index 06a0e342fe..debf0d600e 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -93,6 +93,7 @@
#include "qemu/config-file.h"
#include "qemu/qemu-options.h"
#include "qemu/main-loop.h"
+#include "hw/cxl/cxl.h"
#ifdef CONFIG_VIRTFS
#include "fsdev/qemu-fsdev.h"
#endif
@@ -118,6 +119,7 @@
#include "qapi/qapi-events-run-state.h"
#include "qapi/qapi-visit-block-core.h"
#include "qapi/qapi-visit-compat.h"
+#include "qapi/qapi-visit-machine.h"
#include "qapi/qapi-visit-ui.h"
#include "qapi/qapi-commands-block-core.h"
#include "qapi/qapi-commands-migration.h"
@@ -143,6 +145,12 @@ typedef struct BlockdevOptionsQueueEntry {
typedef QSIMPLEQ_HEAD(, BlockdevOptionsQueueEntry) BlockdevOptionsQueue;
+typedef struct CXLFMWOptionQueueEntry {
+ CXLFixedMemoryWindowOptions *opts;
+ Location loc;
+ QSIMPLEQ_ENTRY(CXLFMWOptionQueueEntry) entry;
+} CXLFMWOptionQueueEntry;
+
typedef struct ObjectOption {
ObjectOptions *opts;
QTAILQ_ENTRY(ObjectOption) next;
@@ -169,6 +177,8 @@ static int snapshot;
static bool preconfig_requested;
static QemuPluginList plugin_list = QTAILQ_HEAD_INITIALIZER(plugin_list);
static BlockdevOptionsQueue bdo_queue = QSIMPLEQ_HEAD_INITIALIZER(bdo_queue);
+static QSIMPLEQ_HEAD(, CXLFMWOptionQueueEntry) CXLFMW_opts =
+ QSIMPLEQ_HEAD_INITIALIZER(CXLFMW_opts);
static bool nographic = false;
static int mem_prealloc; /* force preallocation of physical target memory */
static ram_addr_t ram_size;
@@ -1152,6 +1162,24 @@ static void parse_display(const char *p)
}
}
+static void parse_cxl_fixed_memory_window(const char *optarg)
+{
+ CXLFMWOptionQueueEntry *cfmws_entry;
+ Visitor *v;
+
+ v = qobject_input_visitor_new_str(optarg, "cxl-fixed-memory-window",
+ &error_fatal);
+ cfmws_entry = g_new(CXLFMWOptionQueueEntry, 1);
+ visit_type_CXLFixedMemoryWindowOptions(v, NULL, &cfmws_entry->opts,
+ &error_fatal);
+ if (!cfmws_entry->opts) {
+ exit(1);
+ }
+ visit_free(v);
+ loc_save(&cfmws_entry->loc);
+ QSIMPLEQ_INSERT_TAIL(&CXLFMW_opts, cfmws_entry, entry);
+}
+
static inline bool nonempty_str(const char *str)
{
return str && *str;
@@ -2023,6 +2051,20 @@ static void qemu_create_late_backends(void)
qemu_semihosting_console_init();
}
+static void cxl_set_opts(void)
+{
+ while (!QSIMPLEQ_EMPTY(&CXLFMW_opts)) {
+ CXLFMWOptionQueueEntry *cfmws_entry = QSIMPLEQ_FIRST(&CXLFMW_opts);
+
+ loc_restore(&cfmws_entry->loc);
+ QSIMPLEQ_REMOVE_HEAD(&CXLFMW_opts, entry);
+ cxl_fixed_memory_window_config(current_machine, cfmws_entry->opts,
+ &error_fatal);
+ qapi_free_CXLFixedMemoryWindowOptions(cfmws_entry->opts);
+ g_free(cfmws_entry);
+ }
+}
+
static bool have_custom_ram_size(void)
{
QemuOpts *opts = qemu_find_opts_singleton("memory");
@@ -2745,6 +2787,7 @@ void qmp_x_exit_preconfig(Error **errp)
qemu_init_board();
qemu_create_cli_devices();
+ cxl_fixed_memory_window_link_targets(errp);
qemu_machine_creation_done();
if (loadvm) {
@@ -2925,6 +2968,9 @@ void qemu_init(int argc, char **argv, char **envp)
exit(1);
}
break;
+ case QEMU_OPTION_cxl_fixed_memory_window:
+ parse_cxl_fixed_memory_window(optarg);
+ break;
case QEMU_OPTION_display:
parse_display(optarg);
break;
@@ -3764,6 +3810,7 @@ void qemu_init(int argc, char **argv, char **envp)
qemu_resolve_machine_memdev();
parse_numa_opts(current_machine);
+ cxl_set_opts();
if (vmstate_dump_file) {
/* dump and exit */
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* Re: [PATCH v10 27/45] hw/cxl/host: Add support for CXL Fixed Memory Windows.
2022-04-29 14:40 ` Jonathan Cameron via
(?)
@ 2022-05-21 9:07 ` Paolo Bonzini
2022-05-23 15:15 ` Jonathan Cameron via
-1 siblings, 1 reply; 100+ messages in thread
From: Paolo Bonzini @ 2022-05-21 9:07 UTC (permalink / raw)
To: Jonathan Cameron, linuxarm, qemu-devel, alex.bennee,
Marcel Apfelbaum, Michael S . Tsirkin, Igor Mammedov,
Markus Armbruster, Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Saransh Gupta1, Shreyas Shah, Chris Browy, Samarth Saxena,
Dan Williams, k.jensen, dave, Alison Schofield
On 4/29/22 16:40, Jonathan Cameron via wrote:
> From: Jonathan Cameron <jonathan.cameron@huawei.com>
>
> The concept of these is introduced in [1] in terms of the
> description the CEDT ACPI table. The principal is more general.
> Unlike once traffic hits the CXL root bridges, the host system
> memory address routing is implementation defined and effectively
> static once observable by standard / generic system software.
> Each CXL Fixed Memory Windows (CFMW) is a region of PA space
> which has fixed system dependent routing configured so that
> accesses can be routed to the CXL devices below a set of target
> root bridges. The accesses may be interleaved across multiple
> root bridges.
>
> For QEMU we could have fully specified these regions in terms
> of a base PA + size, but as the absolute address does not matter
> it is simpler to let individual platforms place the memory regions.
>
> ExampleS:
> -cxl-fixed-memory-window targets.0=cxl.0,size=128G
> -cxl-fixed-memory-window targets.0=cxl.1,size=128G
> -cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Sorry for the late review, but: no more command line options should
be added to QEMU. This should be:
-M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.size=128G \
-M cxl-fmw.1.targets.0=cxl.1,cxl-fmw.1.size=128G \
-M cxl-fmw.2.targets.0=cxl.0,cxl-fmw.2.targets.1=cxl.1,cxl-fmw.2.size=128G,cxl-fmw.2.interleave-granularity=2k
I'm not against adding a shortcut as above, but the implementation should
be entirely in MachineState using a QOM property.
The reason for this is that we're looking into doing machine setup entirely
via RPC, and any extra option is a new command to be implemented.
Would you be able to do the change? Since you are already using QAPI to
deserialize the option it should not be hard. I can promise a quick review,
and I can also provide with an example conversion for -boot at
https://lore.kernel.org/r/20220414165300.555321-3-pbonzini@redhat.com/.
Paolo
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [PATCH v10 27/45] hw/cxl/host: Add support for CXL Fixed Memory Windows.
2022-05-21 9:07 ` Paolo Bonzini
@ 2022-05-23 15:15 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-05-23 15:15 UTC (permalink / raw)
To: Paolo Bonzini
Cc: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang, linux-cxl,
Ben Widawsky, Peter Maydell, Shameerali Kolothum Thodi, f4bug,
Peter Xu, David Hildenbrand, Saransh Gupta1, Shreyas Shah,
Chris Browy, Samarth Saxena, Dan Williams, k.jensen, dave,
Alison Schofield
On Sat, 21 May 2022 11:07:13 +0200
Paolo Bonzini <pbonzini@redhat.com> wrote:
> On 4/29/22 16:40, Jonathan Cameron via wrote:
> > From: Jonathan Cameron <jonathan.cameron@huawei.com>
> >
> > The concept of these is introduced in [1] in terms of the
> > description the CEDT ACPI table. The principal is more general.
> > Unlike once traffic hits the CXL root bridges, the host system
> > memory address routing is implementation defined and effectively
> > static once observable by standard / generic system software.
> > Each CXL Fixed Memory Windows (CFMW) is a region of PA space
> > which has fixed system dependent routing configured so that
> > accesses can be routed to the CXL devices below a set of target
> > root bridges. The accesses may be interleaved across multiple
> > root bridges.
> >
> > For QEMU we could have fully specified these regions in terms
> > of a base PA + size, but as the absolute address does not matter
> > it is simpler to let individual platforms place the memory regions.
> >
> > ExampleS:
> > -cxl-fixed-memory-window targets.0=cxl.0,size=128G
> > -cxl-fixed-memory-window targets.0=cxl.1,size=128G
> > -cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
>
> Sorry for the late review, but: no more command line options should
> be added to QEMU. This should be:
>
> -M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.size=128G \
> -M cxl-fmw.1.targets.0=cxl.1,cxl-fmw.1.size=128G \
> -M cxl-fmw.2.targets.0=cxl.0,cxl-fmw.2.targets.1=cxl.1,cxl-fmw.2.size=128G,cxl-fmw.2.interleave-granularity=2k
>
Hi Paolo,
I thought I had this working but have run into an issue where the parser
seems not to like multiple parts of cxl-fmw as below being in different
-M entries. I get
qemu-system-aarch64: -M cxl-fmw.1.targets.0=cxl.1,cxl-fmw.1.size=4G,cxl-fmw.1.interleave-granularity=8k: Parameters 'cxl-fmw.*' used inconsistently
Seems it doesn't let me have multiple elements of a list in different -M entries.
Not a disaster but it's going to lead to some unreadable command lines.
Very lightly tested patch below. I've not yet looked at movingstuff
to machine specific callbacks as per your other comment. I recall that wasn't
easy to do with an earlier version of the series, but given a lot has changed
since then it might now easier to accomplish.
Thanks,
Jonathan
> I'm not against adding a shortcut as above, but the implementation should
> be entirely in MachineState using a QOM property.
>
> The reason for this is that we're looking into doing machine setup entirely
> via RPC, and any extra option is a new command to be implemented.
>
> Would you be able to do the change? Since you are already using QAPI to
> deserialize the option it should not be hard. I can promise a quick review,
> and I can also provide with an example conversion for -boot at
> https://lore.kernel.org/r/20220414165300.555321-3-pbonzini@redhat.com/.
From d856959a08513b098fda22472f0b870750910543 Mon Sep 17 00:00:00 2001
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Date: Mon, 23 May 2022 16:07:45 +0100
Subject: [PATCH] hw/cxl: Make the CXL fixed memory window setup a machine
parameter.
Paolo Bonzini requested this change to simplify the ongoing
effort to allow machine setup entirely via RPC.
Includes shortening the command line form cxl-fixed-memory-window
to cxl-fmw as the command lines are extremely long even with this
change.
The json change is needed to ensure that there is
a CXLFixedMemoryWindowOptionsList even though the actual
element in the json is never used.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/core/machine.c | 33 +++++++++++++++++++++++++++++++
include/hw/boards.h | 1 +
qapi/machine.json | 13 +++++++++++++
softmmu/vl.c | 47 ++++-----------------------------------------
4 files changed, 51 insertions(+), 43 deletions(-)
diff --git a/hw/core/machine.c b/hw/core/machine.c
index bb0dc8f6a9..93b3b8d34a 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -920,6 +920,33 @@ out_free:
qapi_free_BootConfiguration(config);
}
+static void machine_get_cfmw(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ MachineState *ms = MACHINE(obj);
+ CXLFixedMemoryWindowOptionsList *list = ms->cfmws_list;
+
+ visit_type_CXLFixedMemoryWindowOptionsList(v, name, &list, errp);
+}
+
+static void machine_set_cfmw(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ MachineState *ms = MACHINE(obj);
+ CXLFixedMemoryWindowOptionsList *cfmw_list = NULL;
+ CXLFixedMemoryWindowOptionsList *it;
+
+ visit_type_CXLFixedMemoryWindowOptionsList(v, name, &cfmw_list, errp);
+ if (!cfmw_list) {
+ return;
+ }
+
+ for (it = cfmw_list; it; it = it->next) {
+ cxl_fixed_memory_window_config(current_machine, it->value, errp);
+ }
+ ms->cfmws_list = cfmw_list;
+}
+
static void machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
@@ -966,6 +993,12 @@ static void machine_class_init(ObjectClass *oc, void *data)
object_class_property_set_description(oc, "boot",
"Boot configuration");
+ object_class_property_add(oc, "cxl-fmw", "CXLFixedMemoryWindow",
+ machine_get_cfmw, machine_set_cfmw,
+ NULL, NULL);
+ object_class_property_set_description(oc, "cxl-fmw",
+ "CXL Fixed Memory Window");
+
object_class_property_add(oc, "smp", "SMPConfiguration",
machine_get_smp, machine_set_smp,
NULL, NULL);
diff --git a/include/hw/boards.h b/include/hw/boards.h
index fa57bac4fb..dd9fc56df2 100644
--- a/include/hw/boards.h
+++ b/include/hw/boards.h
@@ -362,6 +362,7 @@ struct MachineState {
struct NVDIMMState *nvdimms_state;
struct CXLState *cxl_devices_state;
struct NumaState *numa_state;
+ CXLFixedMemoryWindowOptionsList *cfmws_list;
};
#define DEFINE_MACHINE(namestr, machine_initfn) \
diff --git a/qapi/machine.json b/qapi/machine.json
index 883ce3f9ea..b17ac79494 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -523,6 +523,19 @@
'*interleave-granularity': 'size',
'targets': ['str'] }}
+##
+# @CXLFMWProperties:
+#
+# List of CXL Fixed Memory Windows.
+#
+# @cxl-fmw: List of CXLFixedMemoryWindowOptions
+#
+# Since 7.1
+##
+{ 'struct' : 'CXLFMWProperties',
+ 'data': { 'cxl-fmw': ['CXLFixedMemoryWindowOptions'] }
+}
+
##
# @X86CPURegister32:
#
diff --git a/softmmu/vl.c b/softmmu/vl.c
index 84a31eba76..01997968f5 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -147,11 +147,6 @@ typedef struct BlockdevOptionsQueueEntry {
typedef QSIMPLEQ_HEAD(, BlockdevOptionsQueueEntry) BlockdevOptionsQueue;
-typedef struct CXLFMWOptionQueueEntry {
- CXLFixedMemoryWindowOptions *opts;
- Location loc;
- QSIMPLEQ_ENTRY(CXLFMWOptionQueueEntry) entry;
-} CXLFMWOptionQueueEntry;
typedef struct ObjectOption {
ObjectOptions *opts;
@@ -179,8 +174,7 @@ static int snapshot;
static bool preconfig_requested;
static QemuPluginList plugin_list = QTAILQ_HEAD_INITIALIZER(plugin_list);
static BlockdevOptionsQueue bdo_queue = QSIMPLEQ_HEAD_INITIALIZER(bdo_queue);
-static QSIMPLEQ_HEAD(, CXLFMWOptionQueueEntry) CXLFMW_opts =
- QSIMPLEQ_HEAD_INITIALIZER(CXLFMW_opts);
+
static bool nographic = false;
static int mem_prealloc; /* force preallocation of physical target memory */
static const char *vga_model = NULL;
@@ -1165,24 +1159,6 @@ static void parse_display(const char *p)
}
}
-static void parse_cxl_fixed_memory_window(const char *optarg)
-{
- CXLFMWOptionQueueEntry *cfmws_entry;
- Visitor *v;
-
- v = qobject_input_visitor_new_str(optarg, "cxl-fixed-memory-window",
- &error_fatal);
- cfmws_entry = g_new(CXLFMWOptionQueueEntry, 1);
- visit_type_CXLFixedMemoryWindowOptions(v, NULL, &cfmws_entry->opts,
- &error_fatal);
- if (!cfmws_entry->opts) {
- exit(1);
- }
- visit_free(v);
- loc_save(&cfmws_entry->loc);
- QSIMPLEQ_INSERT_TAIL(&CXLFMW_opts, cfmws_entry, entry);
-}
-
static inline bool nonempty_str(const char *str)
{
return str && *str;
@@ -2045,20 +2021,6 @@ static void qemu_create_late_backends(void)
qemu_semihosting_console_init();
}
-static void cxl_set_opts(void)
-{
- while (!QSIMPLEQ_EMPTY(&CXLFMW_opts)) {
- CXLFMWOptionQueueEntry *cfmws_entry = QSIMPLEQ_FIRST(&CXLFMW_opts);
-
- loc_restore(&cfmws_entry->loc);
- QSIMPLEQ_REMOVE_HEAD(&CXLFMW_opts, entry);
- cxl_fixed_memory_window_config(current_machine, cfmws_entry->opts,
- &error_fatal);
- qapi_free_CXLFixedMemoryWindowOptions(cfmws_entry->opts);
- g_free(cfmws_entry);
- }
-}
-
static void qemu_resolve_machine_memdev(void)
{
if (ram_memdev_id) {
@@ -2187,6 +2149,7 @@ static bool is_qemuopts_group(const char *group)
g_str_equal(group, "machine") ||
g_str_equal(group, "smp-opts") ||
g_str_equal(group, "boot-opts") ||
+ g_str_equal(group, "cxl-fmw") ||
g_str_equal(group, "memory")) {
return false;
}
@@ -2213,6 +2176,8 @@ static void qemu_record_config_group(const char *group, QDict *dict,
machine_merge_property("boot", dict, &error_fatal);
} else if (g_str_equal(group, "memory")) {
machine_merge_property("memory", dict, &error_fatal);
+ } else if (g_str_equal(group, "cxl-fmw")) {
+ machine_merge_property("cxl-fmw", dict, &error_fatal);
} else {
abort();
}
@@ -2886,9 +2851,6 @@ void qemu_init(int argc, char **argv, char **envp)
exit(1);
}
break;
- case QEMU_OPTION_cxl_fixed_memory_window:
- parse_cxl_fixed_memory_window(optarg);
- break;
case QEMU_OPTION_display:
parse_display(optarg);
break;
@@ -3724,7 +3686,6 @@ void qemu_init(int argc, char **argv, char **envp)
qemu_resolve_machine_memdev();
parse_numa_opts(current_machine);
- cxl_set_opts();
if (vmstate_dump_file) {
/* dump and exit */
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* Re: [PATCH v10 27/45] hw/cxl/host: Add support for CXL Fixed Memory Windows.
@ 2022-05-23 15:15 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-05-23 15:15 UTC (permalink / raw)
To: Paolo Bonzini
Cc: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang, linux-cxl,
Ben Widawsky, Peter Maydell, Shameerali Kolothum Thodi, f4bug,
Peter Xu, David Hildenbrand, Saransh Gupta1, Shreyas Shah,
Chris Browy, Samarth Saxena, Dan Williams, k.jensen, dave,
Alison Schofield
On Sat, 21 May 2022 11:07:13 +0200
Paolo Bonzini <pbonzini@redhat.com> wrote:
> On 4/29/22 16:40, Jonathan Cameron via wrote:
> > From: Jonathan Cameron <jonathan.cameron@huawei.com>
> >
> > The concept of these is introduced in [1] in terms of the
> > description the CEDT ACPI table. The principal is more general.
> > Unlike once traffic hits the CXL root bridges, the host system
> > memory address routing is implementation defined and effectively
> > static once observable by standard / generic system software.
> > Each CXL Fixed Memory Windows (CFMW) is a region of PA space
> > which has fixed system dependent routing configured so that
> > accesses can be routed to the CXL devices below a set of target
> > root bridges. The accesses may be interleaved across multiple
> > root bridges.
> >
> > For QEMU we could have fully specified these regions in terms
> > of a base PA + size, but as the absolute address does not matter
> > it is simpler to let individual platforms place the memory regions.
> >
> > ExampleS:
> > -cxl-fixed-memory-window targets.0=cxl.0,size=128G
> > -cxl-fixed-memory-window targets.0=cxl.1,size=128G
> > -cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
>
> Sorry for the late review, but: no more command line options should
> be added to QEMU. This should be:
>
> -M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.size=128G \
> -M cxl-fmw.1.targets.0=cxl.1,cxl-fmw.1.size=128G \
> -M cxl-fmw.2.targets.0=cxl.0,cxl-fmw.2.targets.1=cxl.1,cxl-fmw.2.size=128G,cxl-fmw.2.interleave-granularity=2k
>
Hi Paolo,
I thought I had this working but have run into an issue where the parser
seems not to like multiple parts of cxl-fmw as below being in different
-M entries. I get
qemu-system-aarch64: -M cxl-fmw.1.targets.0=cxl.1,cxl-fmw.1.size=4G,cxl-fmw.1.interleave-granularity=8k: Parameters 'cxl-fmw.*' used inconsistently
Seems it doesn't let me have multiple elements of a list in different -M entries.
Not a disaster but it's going to lead to some unreadable command lines.
Very lightly tested patch below. I've not yet looked at movingstuff
to machine specific callbacks as per your other comment. I recall that wasn't
easy to do with an earlier version of the series, but given a lot has changed
since then it might now easier to accomplish.
Thanks,
Jonathan
> I'm not against adding a shortcut as above, but the implementation should
> be entirely in MachineState using a QOM property.
>
> The reason for this is that we're looking into doing machine setup entirely
> via RPC, and any extra option is a new command to be implemented.
>
> Would you be able to do the change? Since you are already using QAPI to
> deserialize the option it should not be hard. I can promise a quick review,
> and I can also provide with an example conversion for -boot at
> https://lore.kernel.org/r/20220414165300.555321-3-pbonzini@redhat.com/.
From d856959a08513b098fda22472f0b870750910543 Mon Sep 17 00:00:00 2001
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Date: Mon, 23 May 2022 16:07:45 +0100
Subject: [PATCH] hw/cxl: Make the CXL fixed memory window setup a machine
parameter.
Paolo Bonzini requested this change to simplify the ongoing
effort to allow machine setup entirely via RPC.
Includes shortening the command line form cxl-fixed-memory-window
to cxl-fmw as the command lines are extremely long even with this
change.
The json change is needed to ensure that there is
a CXLFixedMemoryWindowOptionsList even though the actual
element in the json is never used.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/core/machine.c | 33 +++++++++++++++++++++++++++++++
include/hw/boards.h | 1 +
qapi/machine.json | 13 +++++++++++++
softmmu/vl.c | 47 ++++-----------------------------------------
4 files changed, 51 insertions(+), 43 deletions(-)
diff --git a/hw/core/machine.c b/hw/core/machine.c
index bb0dc8f6a9..93b3b8d34a 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -920,6 +920,33 @@ out_free:
qapi_free_BootConfiguration(config);
}
+static void machine_get_cfmw(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ MachineState *ms = MACHINE(obj);
+ CXLFixedMemoryWindowOptionsList *list = ms->cfmws_list;
+
+ visit_type_CXLFixedMemoryWindowOptionsList(v, name, &list, errp);
+}
+
+static void machine_set_cfmw(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ MachineState *ms = MACHINE(obj);
+ CXLFixedMemoryWindowOptionsList *cfmw_list = NULL;
+ CXLFixedMemoryWindowOptionsList *it;
+
+ visit_type_CXLFixedMemoryWindowOptionsList(v, name, &cfmw_list, errp);
+ if (!cfmw_list) {
+ return;
+ }
+
+ for (it = cfmw_list; it; it = it->next) {
+ cxl_fixed_memory_window_config(current_machine, it->value, errp);
+ }
+ ms->cfmws_list = cfmw_list;
+}
+
static void machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
@@ -966,6 +993,12 @@ static void machine_class_init(ObjectClass *oc, void *data)
object_class_property_set_description(oc, "boot",
"Boot configuration");
+ object_class_property_add(oc, "cxl-fmw", "CXLFixedMemoryWindow",
+ machine_get_cfmw, machine_set_cfmw,
+ NULL, NULL);
+ object_class_property_set_description(oc, "cxl-fmw",
+ "CXL Fixed Memory Window");
+
object_class_property_add(oc, "smp", "SMPConfiguration",
machine_get_smp, machine_set_smp,
NULL, NULL);
diff --git a/include/hw/boards.h b/include/hw/boards.h
index fa57bac4fb..dd9fc56df2 100644
--- a/include/hw/boards.h
+++ b/include/hw/boards.h
@@ -362,6 +362,7 @@ struct MachineState {
struct NVDIMMState *nvdimms_state;
struct CXLState *cxl_devices_state;
struct NumaState *numa_state;
+ CXLFixedMemoryWindowOptionsList *cfmws_list;
};
#define DEFINE_MACHINE(namestr, machine_initfn) \
diff --git a/qapi/machine.json b/qapi/machine.json
index 883ce3f9ea..b17ac79494 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -523,6 +523,19 @@
'*interleave-granularity': 'size',
'targets': ['str'] }}
+##
+# @CXLFMWProperties:
+#
+# List of CXL Fixed Memory Windows.
+#
+# @cxl-fmw: List of CXLFixedMemoryWindowOptions
+#
+# Since 7.1
+##
+{ 'struct' : 'CXLFMWProperties',
+ 'data': { 'cxl-fmw': ['CXLFixedMemoryWindowOptions'] }
+}
+
##
# @X86CPURegister32:
#
diff --git a/softmmu/vl.c b/softmmu/vl.c
index 84a31eba76..01997968f5 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -147,11 +147,6 @@ typedef struct BlockdevOptionsQueueEntry {
typedef QSIMPLEQ_HEAD(, BlockdevOptionsQueueEntry) BlockdevOptionsQueue;
-typedef struct CXLFMWOptionQueueEntry {
- CXLFixedMemoryWindowOptions *opts;
- Location loc;
- QSIMPLEQ_ENTRY(CXLFMWOptionQueueEntry) entry;
-} CXLFMWOptionQueueEntry;
typedef struct ObjectOption {
ObjectOptions *opts;
@@ -179,8 +174,7 @@ static int snapshot;
static bool preconfig_requested;
static QemuPluginList plugin_list = QTAILQ_HEAD_INITIALIZER(plugin_list);
static BlockdevOptionsQueue bdo_queue = QSIMPLEQ_HEAD_INITIALIZER(bdo_queue);
-static QSIMPLEQ_HEAD(, CXLFMWOptionQueueEntry) CXLFMW_opts =
- QSIMPLEQ_HEAD_INITIALIZER(CXLFMW_opts);
+
static bool nographic = false;
static int mem_prealloc; /* force preallocation of physical target memory */
static const char *vga_model = NULL;
@@ -1165,24 +1159,6 @@ static void parse_display(const char *p)
}
}
-static void parse_cxl_fixed_memory_window(const char *optarg)
-{
- CXLFMWOptionQueueEntry *cfmws_entry;
- Visitor *v;
-
- v = qobject_input_visitor_new_str(optarg, "cxl-fixed-memory-window",
- &error_fatal);
- cfmws_entry = g_new(CXLFMWOptionQueueEntry, 1);
- visit_type_CXLFixedMemoryWindowOptions(v, NULL, &cfmws_entry->opts,
- &error_fatal);
- if (!cfmws_entry->opts) {
- exit(1);
- }
- visit_free(v);
- loc_save(&cfmws_entry->loc);
- QSIMPLEQ_INSERT_TAIL(&CXLFMW_opts, cfmws_entry, entry);
-}
-
static inline bool nonempty_str(const char *str)
{
return str && *str;
@@ -2045,20 +2021,6 @@ static void qemu_create_late_backends(void)
qemu_semihosting_console_init();
}
-static void cxl_set_opts(void)
-{
- while (!QSIMPLEQ_EMPTY(&CXLFMW_opts)) {
- CXLFMWOptionQueueEntry *cfmws_entry = QSIMPLEQ_FIRST(&CXLFMW_opts);
-
- loc_restore(&cfmws_entry->loc);
- QSIMPLEQ_REMOVE_HEAD(&CXLFMW_opts, entry);
- cxl_fixed_memory_window_config(current_machine, cfmws_entry->opts,
- &error_fatal);
- qapi_free_CXLFixedMemoryWindowOptions(cfmws_entry->opts);
- g_free(cfmws_entry);
- }
-}
-
static void qemu_resolve_machine_memdev(void)
{
if (ram_memdev_id) {
@@ -2187,6 +2149,7 @@ static bool is_qemuopts_group(const char *group)
g_str_equal(group, "machine") ||
g_str_equal(group, "smp-opts") ||
g_str_equal(group, "boot-opts") ||
+ g_str_equal(group, "cxl-fmw") ||
g_str_equal(group, "memory")) {
return false;
}
@@ -2213,6 +2176,8 @@ static void qemu_record_config_group(const char *group, QDict *dict,
machine_merge_property("boot", dict, &error_fatal);
} else if (g_str_equal(group, "memory")) {
machine_merge_property("memory", dict, &error_fatal);
+ } else if (g_str_equal(group, "cxl-fmw")) {
+ machine_merge_property("cxl-fmw", dict, &error_fatal);
} else {
abort();
}
@@ -2886,9 +2851,6 @@ void qemu_init(int argc, char **argv, char **envp)
exit(1);
}
break;
- case QEMU_OPTION_cxl_fixed_memory_window:
- parse_cxl_fixed_memory_window(optarg);
- break;
case QEMU_OPTION_display:
parse_display(optarg);
break;
@@ -3724,7 +3686,6 @@ void qemu_init(int argc, char **argv, char **envp)
qemu_resolve_machine_memdev();
parse_numa_opts(current_machine);
- cxl_set_opts();
if (vmstate_dump_file) {
/* dump and exit */
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 28/45] acpi/cxl: Introduce CFMWS structures in CEDT
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
The CEDT CXL Fixed Window Memory Window Structures (CFMWs)
define regions of the host phyiscal address map which
(via an impdef means) are configured such that they have
a particular interleave setup across one or more CXL Host Bridges.
Reported-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/acpi/cxl.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/hw/acpi/cxl.c b/hw/acpi/cxl.c
index aa4af86a4c..31d5235136 100644
--- a/hw/acpi/cxl.c
+++ b/hw/acpi/cxl.c
@@ -60,6 +60,64 @@ static void cedt_build_chbs(GArray *table_data, PXBDev *cxl)
build_append_int_noprefix(table_data, memory_region_size(mr), 8);
}
+/*
+ * CFMWS entries in CXL 2.0 ECN: CEDT CFMWS & QTG _DSM.
+ * Interleave ways encoding in CXL 2.0 ECN: 3, 6, 12 and 16-way memory
+ * interleaving.
+ */
+static void cedt_build_cfmws(GArray *table_data, MachineState *ms)
+{
+ CXLState *cxls = ms->cxl_devices_state;
+ GList *it;
+
+ for (it = cxls->fixed_windows; it; it = it->next) {
+ CXLFixedWindow *fw = it->data;
+ int i;
+
+ /* Type */
+ build_append_int_noprefix(table_data, 1, 1);
+
+ /* Reserved */
+ build_append_int_noprefix(table_data, 0, 1);
+
+ /* Record Length */
+ build_append_int_noprefix(table_data, 36 + 4 * fw->num_targets, 2);
+
+ /* Reserved */
+ build_append_int_noprefix(table_data, 0, 4);
+
+ /* Base HPA */
+ build_append_int_noprefix(table_data, fw->mr.addr, 8);
+
+ /* Window Size */
+ build_append_int_noprefix(table_data, fw->size, 8);
+
+ /* Host Bridge Interleave Ways */
+ build_append_int_noprefix(table_data, fw->enc_int_ways, 1);
+
+ /* Host Bridge Interleave Arithmetic */
+ build_append_int_noprefix(table_data, 0, 1);
+
+ /* Reserved */
+ build_append_int_noprefix(table_data, 0, 2);
+
+ /* Host Bridge Interleave Granularity */
+ build_append_int_noprefix(table_data, fw->enc_int_gran, 4);
+
+ /* Window Restrictions */
+ build_append_int_noprefix(table_data, 0x0f, 2); /* No restrictions */
+
+ /* QTG ID */
+ build_append_int_noprefix(table_data, 0, 2);
+
+ /* Host Bridge List (list of UIDs - currently bus_nr) */
+ for (i = 0; i < fw->num_targets; i++) {
+ g_assert(fw->target_hbs[i]);
+ build_append_int_noprefix(table_data, fw->target_hbs[i]->bus_nr, 4);
+ }
+ }
+}
+
static int cxl_foreach_pxb_hb(Object *obj, void *opaque)
{
Aml *cedt = opaque;
@@ -86,6 +144,7 @@ void cxl_build_cedt(MachineState *ms, GArray *table_offsets, GArray *table_data,
/* reserve space for CEDT header */
object_child_foreach_recursive(object_get_root(), cxl_foreach_pxb_hb, cedt);
+ cedt_build_cfmws(cedt->buf, ms);
/* copy AML table into ACPI tables blob and patch header there */
g_array_append_vals(table_data, cedt->buf->data, cedt->buf->len);
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 28/45] acpi/cxl: Introduce CFMWS structures in CEDT
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
The CEDT CXL Fixed Window Memory Window Structures (CFMWs)
define regions of the host phyiscal address map which
(via an impdef means) are configured such that they have
a particular interleave setup across one or more CXL Host Bridges.
Reported-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/acpi/cxl.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/hw/acpi/cxl.c b/hw/acpi/cxl.c
index aa4af86a4c..31d5235136 100644
--- a/hw/acpi/cxl.c
+++ b/hw/acpi/cxl.c
@@ -60,6 +60,64 @@ static void cedt_build_chbs(GArray *table_data, PXBDev *cxl)
build_append_int_noprefix(table_data, memory_region_size(mr), 8);
}
+/*
+ * CFMWS entries in CXL 2.0 ECN: CEDT CFMWS & QTG _DSM.
+ * Interleave ways encoding in CXL 2.0 ECN: 3, 6, 12 and 16-way memory
+ * interleaving.
+ */
+static void cedt_build_cfmws(GArray *table_data, MachineState *ms)
+{
+ CXLState *cxls = ms->cxl_devices_state;
+ GList *it;
+
+ for (it = cxls->fixed_windows; it; it = it->next) {
+ CXLFixedWindow *fw = it->data;
+ int i;
+
+ /* Type */
+ build_append_int_noprefix(table_data, 1, 1);
+
+ /* Reserved */
+ build_append_int_noprefix(table_data, 0, 1);
+
+ /* Record Length */
+ build_append_int_noprefix(table_data, 36 + 4 * fw->num_targets, 2);
+
+ /* Reserved */
+ build_append_int_noprefix(table_data, 0, 4);
+
+ /* Base HPA */
+ build_append_int_noprefix(table_data, fw->mr.addr, 8);
+
+ /* Window Size */
+ build_append_int_noprefix(table_data, fw->size, 8);
+
+ /* Host Bridge Interleave Ways */
+ build_append_int_noprefix(table_data, fw->enc_int_ways, 1);
+
+ /* Host Bridge Interleave Arithmetic */
+ build_append_int_noprefix(table_data, 0, 1);
+
+ /* Reserved */
+ build_append_int_noprefix(table_data, 0, 2);
+
+ /* Host Bridge Interleave Granularity */
+ build_append_int_noprefix(table_data, fw->enc_int_gran, 4);
+
+ /* Window Restrictions */
+ build_append_int_noprefix(table_data, 0x0f, 2); /* No restrictions */
+
+ /* QTG ID */
+ build_append_int_noprefix(table_data, 0, 2);
+
+ /* Host Bridge List (list of UIDs - currently bus_nr) */
+ for (i = 0; i < fw->num_targets; i++) {
+ g_assert(fw->target_hbs[i]);
+ build_append_int_noprefix(table_data, fw->target_hbs[i]->bus_nr, 4);
+ }
+ }
+}
+
static int cxl_foreach_pxb_hb(Object *obj, void *opaque)
{
Aml *cedt = opaque;
@@ -86,6 +144,7 @@ void cxl_build_cedt(MachineState *ms, GArray *table_offsets, GArray *table_data,
/* reserve space for CEDT header */
object_child_foreach_recursive(object_get_root(), cxl_foreach_pxb_hb, cedt);
+ cedt_build_cfmws(cedt->buf, ms);
/* copy AML table into ACPI tables blob and patch header there */
g_array_append_vals(table_data, cedt->buf->data, cedt->buf->len);
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 29/45] hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxl
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
This adds code to instantiate the slightly extended ACPI root port
description in DSDT as per the CXL 2.0 specification.
Basically a cut and paste job from the i386/pc code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/arm/Kconfig | 1 +
hw/pci-host/gpex-acpi.c | 20 +++++++++++++++++---
2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 97f3b38019..219262a8da 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -29,6 +29,7 @@ config ARM_VIRT
select ACPI_APEI
select ACPI_VIOT
select VIRTIO_MEM_SUPPORTED
+ select ACPI_CXL
config CHEETAH
bool
diff --git a/hw/pci-host/gpex-acpi.c b/hw/pci-host/gpex-acpi.c
index e7e162a00a..7c7316bc96 100644
--- a/hw/pci-host/gpex-acpi.c
+++ b/hw/pci-host/gpex-acpi.c
@@ -5,6 +5,7 @@
#include "hw/pci/pci_bus.h"
#include "hw/pci/pci_bridge.h"
#include "hw/pci/pcie_host.h"
+#include "hw/acpi/cxl.h"
static void acpi_dsdt_add_pci_route_table(Aml *dev, uint32_t irq)
{
@@ -139,6 +140,7 @@ void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
QLIST_FOREACH(bus, &bus->child, sibling) {
uint8_t bus_num = pci_bus_num(bus);
uint8_t numa_node = pci_bus_numa_node(bus);
+ bool is_cxl = pci_bus_is_cxl(bus);
if (!pci_bus_is_root(bus)) {
continue;
@@ -154,8 +156,16 @@ void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
}
dev = aml_device("PC%.02X", bus_num);
- aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A08")));
- aml_append(dev, aml_name_decl("_CID", aml_string("PNP0A03")));
+ if (is_cxl) {
+ struct Aml *pkg = aml_package(2);
+ aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0016")));
+ aml_append(pkg, aml_eisaid("PNP0A08"));
+ aml_append(pkg, aml_eisaid("PNP0A03"));
+ aml_append(dev, aml_name_decl("_CID", pkg));
+ } else {
+ aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A08")));
+ aml_append(dev, aml_name_decl("_CID", aml_string("PNP0A03")));
+ }
aml_append(dev, aml_name_decl("_BBN", aml_int(bus_num)));
aml_append(dev, aml_name_decl("_UID", aml_int(bus_num)));
aml_append(dev, aml_name_decl("_STR", aml_unicode("pxb Device")));
@@ -175,7 +185,11 @@ void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
cfg->pio.base, 0, 0, 0);
aml_append(dev, aml_name_decl("_CRS", crs));
- acpi_dsdt_add_pci_osc(dev);
+ if (is_cxl) {
+ build_cxl_osc_method(dev);
+ } else {
+ acpi_dsdt_add_pci_osc(dev);
+ }
aml_append(scope, dev);
}
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 29/45] hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxl
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
This adds code to instantiate the slightly extended ACPI root port
description in DSDT as per the CXL 2.0 specification.
Basically a cut and paste job from the i386/pc code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/arm/Kconfig | 1 +
hw/pci-host/gpex-acpi.c | 20 +++++++++++++++++---
2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 97f3b38019..219262a8da 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -29,6 +29,7 @@ config ARM_VIRT
select ACPI_APEI
select ACPI_VIOT
select VIRTIO_MEM_SUPPORTED
+ select ACPI_CXL
config CHEETAH
bool
diff --git a/hw/pci-host/gpex-acpi.c b/hw/pci-host/gpex-acpi.c
index e7e162a00a..7c7316bc96 100644
--- a/hw/pci-host/gpex-acpi.c
+++ b/hw/pci-host/gpex-acpi.c
@@ -5,6 +5,7 @@
#include "hw/pci/pci_bus.h"
#include "hw/pci/pci_bridge.h"
#include "hw/pci/pcie_host.h"
+#include "hw/acpi/cxl.h"
static void acpi_dsdt_add_pci_route_table(Aml *dev, uint32_t irq)
{
@@ -139,6 +140,7 @@ void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
QLIST_FOREACH(bus, &bus->child, sibling) {
uint8_t bus_num = pci_bus_num(bus);
uint8_t numa_node = pci_bus_numa_node(bus);
+ bool is_cxl = pci_bus_is_cxl(bus);
if (!pci_bus_is_root(bus)) {
continue;
@@ -154,8 +156,16 @@ void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
}
dev = aml_device("PC%.02X", bus_num);
- aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A08")));
- aml_append(dev, aml_name_decl("_CID", aml_string("PNP0A03")));
+ if (is_cxl) {
+ struct Aml *pkg = aml_package(2);
+ aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0016")));
+ aml_append(pkg, aml_eisaid("PNP0A08"));
+ aml_append(pkg, aml_eisaid("PNP0A03"));
+ aml_append(dev, aml_name_decl("_CID", pkg));
+ } else {
+ aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A08")));
+ aml_append(dev, aml_name_decl("_CID", aml_string("PNP0A03")));
+ }
aml_append(dev, aml_name_decl("_BBN", aml_int(bus_num)));
aml_append(dev, aml_name_decl("_UID", aml_int(bus_num)));
aml_append(dev, aml_name_decl("_STR", aml_unicode("pxb Device")));
@@ -175,7 +185,11 @@ void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
cfg->pio.base, 0, 0, 0);
aml_append(dev, aml_name_decl("_CRS", crs));
- acpi_dsdt_add_pci_osc(dev);
+ if (is_cxl) {
+ build_cxl_osc_method(dev);
+ } else {
+ acpi_dsdt_add_pci_osc(dev);
+ }
aml_append(scope, dev);
}
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 30/45] pci/pcie_port: Add pci_find_port_by_pn()
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
Simple function to search a PCIBus to find a port by
it's port number.
CXL interleave decoding uses the port number as a target
so it is necessary to locate the port when doing interleave
decoding.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/pci/pcie_port.c | 25 +++++++++++++++++++++++++
include/hw/pci/pcie_port.h | 2 ++
2 files changed, 27 insertions(+)
diff --git a/hw/pci/pcie_port.c b/hw/pci/pcie_port.c
index e95c1e5519..687e4e763a 100644
--- a/hw/pci/pcie_port.c
+++ b/hw/pci/pcie_port.c
@@ -136,6 +136,31 @@ static void pcie_port_class_init(ObjectClass *oc, void *data)
device_class_set_props(dc, pcie_port_props);
}
+PCIDevice *pcie_find_port_by_pn(PCIBus *bus, uint8_t pn)
+{
+ int devfn;
+
+ for (devfn = 0; devfn < ARRAY_SIZE(bus->devices); devfn++) {
+ PCIDevice *d = bus->devices[devfn];
+ PCIEPort *port;
+
+ if (!d || !pci_is_express(d) || !d->exp.exp_cap) {
+ continue;
+ }
+
+ if (!object_dynamic_cast(OBJECT(d), TYPE_PCIE_PORT)) {
+ continue;
+ }
+
+ port = PCIE_PORT(d);
+ if (port->port == pn) {
+ return d;
+ }
+ }
+
+ return NULL;
+}
+
static const TypeInfo pcie_port_type_info = {
.name = TYPE_PCIE_PORT,
.parent = TYPE_PCI_BRIDGE,
diff --git a/include/hw/pci/pcie_port.h b/include/hw/pci/pcie_port.h
index e25b289ce8..7b8193061a 100644
--- a/include/hw/pci/pcie_port.h
+++ b/include/hw/pci/pcie_port.h
@@ -39,6 +39,8 @@ struct PCIEPort {
void pcie_port_init_reg(PCIDevice *d);
+PCIDevice *pcie_find_port_by_pn(PCIBus *bus, uint8_t pn);
+
#define TYPE_PCIE_SLOT "pcie-slot"
OBJECT_DECLARE_SIMPLE_TYPE(PCIESlot, PCIE_SLOT)
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 30/45] pci/pcie_port: Add pci_find_port_by_pn()
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
Simple function to search a PCIBus to find a port by
it's port number.
CXL interleave decoding uses the port number as a target
so it is necessary to locate the port when doing interleave
decoding.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/pci/pcie_port.c | 25 +++++++++++++++++++++++++
include/hw/pci/pcie_port.h | 2 ++
2 files changed, 27 insertions(+)
diff --git a/hw/pci/pcie_port.c b/hw/pci/pcie_port.c
index e95c1e5519..687e4e763a 100644
--- a/hw/pci/pcie_port.c
+++ b/hw/pci/pcie_port.c
@@ -136,6 +136,31 @@ static void pcie_port_class_init(ObjectClass *oc, void *data)
device_class_set_props(dc, pcie_port_props);
}
+PCIDevice *pcie_find_port_by_pn(PCIBus *bus, uint8_t pn)
+{
+ int devfn;
+
+ for (devfn = 0; devfn < ARRAY_SIZE(bus->devices); devfn++) {
+ PCIDevice *d = bus->devices[devfn];
+ PCIEPort *port;
+
+ if (!d || !pci_is_express(d) || !d->exp.exp_cap) {
+ continue;
+ }
+
+ if (!object_dynamic_cast(OBJECT(d), TYPE_PCIE_PORT)) {
+ continue;
+ }
+
+ port = PCIE_PORT(d);
+ if (port->port == pn) {
+ return d;
+ }
+ }
+
+ return NULL;
+}
+
static const TypeInfo pcie_port_type_info = {
.name = TYPE_PCIE_PORT,
.parent = TYPE_PCI_BRIDGE,
diff --git a/include/hw/pci/pcie_port.h b/include/hw/pci/pcie_port.h
index e25b289ce8..7b8193061a 100644
--- a/include/hw/pci/pcie_port.h
+++ b/include/hw/pci/pcie_port.h
@@ -39,6 +39,8 @@ struct PCIEPort {
void pcie_port_init_reg(PCIDevice *d);
+PCIDevice *pcie_find_port_by_pn(PCIBus *bus, uint8_t pn);
+
#define TYPE_PCIE_SLOT "pcie-slot"
OBJECT_DECLARE_SIMPLE_TYPE(PCIESlot, PCIE_SLOT)
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 31/45] CXL/cxl_component: Add cxl_get_hb_cstate()
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
Accessor to get hold of the cxl state for a CXL host bridge
without exposing the internals of the implementation.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/pci-bridge/pci_expander_bridge.c | 7 +++++++
include/hw/cxl/cxl_component.h | 2 ++
2 files changed, 9 insertions(+)
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index 22feda1ff0..69244decdb 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -72,6 +72,13 @@ static GList *pxb_dev_list;
#define TYPE_PXB_HOST "pxb-host"
+CXLComponentState *cxl_get_hb_cstate(PCIHostState *hb)
+{
+ CXLHost *host = PXB_CXL_HOST(hb);
+
+ return &host->cxl_cstate;
+}
+
static int pxb_bus_num(PCIBus *bus)
{
PXBDev *pxb = convert_to_pxb(bus->parent_dev);
diff --git a/include/hw/cxl/cxl_component.h b/include/hw/cxl/cxl_component.h
index 4f69688c47..70b5018156 100644
--- a/include/hw/cxl/cxl_component.h
+++ b/include/hw/cxl/cxl_component.h
@@ -218,4 +218,6 @@ static inline hwaddr cxl_decode_ig(int ig)
return 1 << (ig + 8);
}
+CXLComponentState *cxl_get_hb_cstate(PCIHostState *hb);
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 31/45] CXL/cxl_component: Add cxl_get_hb_cstate()
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
Accessor to get hold of the cxl state for a CXL host bridge
without exposing the internals of the implementation.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/pci-bridge/pci_expander_bridge.c | 7 +++++++
include/hw/cxl/cxl_component.h | 2 ++
2 files changed, 9 insertions(+)
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index 22feda1ff0..69244decdb 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -72,6 +72,13 @@ static GList *pxb_dev_list;
#define TYPE_PXB_HOST "pxb-host"
+CXLComponentState *cxl_get_hb_cstate(PCIHostState *hb)
+{
+ CXLHost *host = PXB_CXL_HOST(hb);
+
+ return &host->cxl_cstate;
+}
+
static int pxb_bus_num(PCIBus *bus)
{
PXBDev *pxb = convert_to_pxb(bus->parent_dev);
diff --git a/include/hw/cxl/cxl_component.h b/include/hw/cxl/cxl_component.h
index 4f69688c47..70b5018156 100644
--- a/include/hw/cxl/cxl_component.h
+++ b/include/hw/cxl/cxl_component.h
@@ -218,4 +218,6 @@ static inline hwaddr cxl_decode_ig(int ig)
return 1 << (ig + 8);
}
+CXLComponentState *cxl_get_hb_cstate(PCIHostState *hb);
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 32/45] mem/cxl_type3: Add read and write functions for associated hostmem.
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
Once a read or write reaches a CXL type 3 device, the HDM decoders
on the device are used to establish the Device Physical Address
which should be accessed. These functions peform the required maths
and then use a device specific address space to access the
hostmem->mr to fullfil the actual operation. Note that failed writes
are silent, but failed reads return poison. Note this is based
loosely on:
https://lore.kernel.org/qemu-devel/20200817161853.593247-6-f4bug@amsat.org/
[RFC PATCH 0/9] hw/misc: Add support for interleaved memory accesses
Only lightly tested so far. More complex test cases yet to be written.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/mem/cxl_type3.c | 91 +++++++++++++++++++++++++++++++++++++
include/hw/cxl/cxl_device.h | 6 +++
2 files changed, 97 insertions(+)
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 6c6ed9a776..3bf2869573 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -97,7 +97,9 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
{
+ DeviceState *ds = DEVICE(ct3d);
MemoryRegion *mr;
+ char *name;
if (!ct3d->hostmem) {
error_setg(errp, "memdev property must be set");
@@ -112,6 +114,15 @@ static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
memory_region_set_nonvolatile(mr, true);
memory_region_set_enabled(mr, true);
host_memory_backend_set_mapped(ct3d->hostmem, true);
+
+ if (ds->id) {
+ name = g_strdup_printf("cxl-type3-dpa-space:%s", ds->id);
+ } else {
+ name = g_strdup("cxl-type3-dpa-space");
+ }
+ address_space_init(&ct3d->hostmem_as, mr, name);
+ g_free(name);
+
ct3d->cxl_dstate.pmem_size = ct3d->hostmem->size;
if (!ct3d->lsa) {
@@ -167,6 +178,86 @@ static void ct3_exit(PCIDevice *pci_dev)
ComponentRegisters *regs = &cxl_cstate->crb;
g_free(regs->special_ops);
+ address_space_destroy(&ct3d->hostmem_as);
+}
+
+/* TODO: Support multiple HDM decoders and DPA skip */
+static bool cxl_type3_dpa(CXLType3Dev *ct3d, hwaddr host_addr, uint64_t *dpa)
+{
+ uint32_t *cache_mem = ct3d->cxl_cstate.crb.cache_mem_registers;
+ uint64_t decoder_base, decoder_size, hpa_offset;
+ uint32_t hdm0_ctrl;
+ int ig, iw;
+
+ decoder_base = (((uint64_t)cache_mem[R_CXL_HDM_DECODER0_BASE_HI] << 32) |
+ cache_mem[R_CXL_HDM_DECODER0_BASE_LO]);
+ if ((uint64_t)host_addr < decoder_base) {
+ return false;
+ }
+
+ hpa_offset = (uint64_t)host_addr - decoder_base;
+
+ decoder_size = ((uint64_t)cache_mem[R_CXL_HDM_DECODER0_SIZE_HI] << 32) |
+ cache_mem[R_CXL_HDM_DECODER0_SIZE_LO];
+ if (hpa_offset >= decoder_size) {
+ return false;
+ }
+
+ hdm0_ctrl = cache_mem[R_CXL_HDM_DECODER0_CTRL];
+ iw = FIELD_EX32(hdm0_ctrl, CXL_HDM_DECODER0_CTRL, IW);
+ ig = FIELD_EX32(hdm0_ctrl, CXL_HDM_DECODER0_CTRL, IG);
+
+ *dpa = (MAKE_64BIT_MASK(0, 8 + ig) & hpa_offset) |
+ ((MAKE_64BIT_MASK(8 + ig + iw, 64 - 8 - ig - iw) & hpa_offset) >> iw);
+
+ return true;
+}
+
+MemTxResult cxl_type3_read(PCIDevice *d, hwaddr host_addr, uint64_t *data,
+ unsigned size, MemTxAttrs attrs)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(d);
+ uint64_t dpa_offset;
+ MemoryRegion *mr;
+
+ /* TODO support volatile region */
+ mr = host_memory_backend_get_memory(ct3d->hostmem);
+ if (!mr) {
+ return MEMTX_ERROR;
+ }
+
+ if (!cxl_type3_dpa(ct3d, host_addr, &dpa_offset)) {
+ return MEMTX_ERROR;
+ }
+
+ if (dpa_offset > int128_get64(mr->size)) {
+ return MEMTX_ERROR;
+ }
+
+ return address_space_read(&ct3d->hostmem_as, dpa_offset, attrs, data, size);
+}
+
+MemTxResult cxl_type3_write(PCIDevice *d, hwaddr host_addr, uint64_t data,
+ unsigned size, MemTxAttrs attrs)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(d);
+ uint64_t dpa_offset;
+ MemoryRegion *mr;
+
+ mr = host_memory_backend_get_memory(ct3d->hostmem);
+ if (!mr) {
+ return MEMTX_OK;
+ }
+
+ if (!cxl_type3_dpa(ct3d, host_addr, &dpa_offset)) {
+ return MEMTX_OK;
+ }
+
+ if (dpa_offset > int128_get64(mr->size)) {
+ return MEMTX_OK;
+ }
+ return address_space_write(&ct3d->hostmem_as, dpa_offset, attrs,
+ &data, size);
}
static void ct3d_reset(DeviceState *dev)
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 4285fbda08..1e141b6621 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -239,6 +239,7 @@ struct CXLType3Dev {
HostMemoryBackend *lsa;
/* State */
+ AddressSpace hostmem_as;
CXLComponentState cxl_cstate;
CXLDeviceState cxl_dstate;
};
@@ -259,4 +260,9 @@ struct CXLType3Class {
uint64_t offset);
};
+MemTxResult cxl_type3_read(PCIDevice *d, hwaddr host_addr, uint64_t *data,
+ unsigned size, MemTxAttrs attrs);
+MemTxResult cxl_type3_write(PCIDevice *d, hwaddr host_addr, uint64_t data,
+ unsigned size, MemTxAttrs attrs);
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 32/45] mem/cxl_type3: Add read and write functions for associated hostmem.
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
Once a read or write reaches a CXL type 3 device, the HDM decoders
on the device are used to establish the Device Physical Address
which should be accessed. These functions peform the required maths
and then use a device specific address space to access the
hostmem->mr to fullfil the actual operation. Note that failed writes
are silent, but failed reads return poison. Note this is based
loosely on:
https://lore.kernel.org/qemu-devel/20200817161853.593247-6-f4bug@amsat.org/
[RFC PATCH 0/9] hw/misc: Add support for interleaved memory accesses
Only lightly tested so far. More complex test cases yet to be written.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/mem/cxl_type3.c | 91 +++++++++++++++++++++++++++++++++++++
include/hw/cxl/cxl_device.h | 6 +++
2 files changed, 97 insertions(+)
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 6c6ed9a776..3bf2869573 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -97,7 +97,9 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
{
+ DeviceState *ds = DEVICE(ct3d);
MemoryRegion *mr;
+ char *name;
if (!ct3d->hostmem) {
error_setg(errp, "memdev property must be set");
@@ -112,6 +114,15 @@ static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
memory_region_set_nonvolatile(mr, true);
memory_region_set_enabled(mr, true);
host_memory_backend_set_mapped(ct3d->hostmem, true);
+
+ if (ds->id) {
+ name = g_strdup_printf("cxl-type3-dpa-space:%s", ds->id);
+ } else {
+ name = g_strdup("cxl-type3-dpa-space");
+ }
+ address_space_init(&ct3d->hostmem_as, mr, name);
+ g_free(name);
+
ct3d->cxl_dstate.pmem_size = ct3d->hostmem->size;
if (!ct3d->lsa) {
@@ -167,6 +178,86 @@ static void ct3_exit(PCIDevice *pci_dev)
ComponentRegisters *regs = &cxl_cstate->crb;
g_free(regs->special_ops);
+ address_space_destroy(&ct3d->hostmem_as);
+}
+
+/* TODO: Support multiple HDM decoders and DPA skip */
+static bool cxl_type3_dpa(CXLType3Dev *ct3d, hwaddr host_addr, uint64_t *dpa)
+{
+ uint32_t *cache_mem = ct3d->cxl_cstate.crb.cache_mem_registers;
+ uint64_t decoder_base, decoder_size, hpa_offset;
+ uint32_t hdm0_ctrl;
+ int ig, iw;
+
+ decoder_base = (((uint64_t)cache_mem[R_CXL_HDM_DECODER0_BASE_HI] << 32) |
+ cache_mem[R_CXL_HDM_DECODER0_BASE_LO]);
+ if ((uint64_t)host_addr < decoder_base) {
+ return false;
+ }
+
+ hpa_offset = (uint64_t)host_addr - decoder_base;
+
+ decoder_size = ((uint64_t)cache_mem[R_CXL_HDM_DECODER0_SIZE_HI] << 32) |
+ cache_mem[R_CXL_HDM_DECODER0_SIZE_LO];
+ if (hpa_offset >= decoder_size) {
+ return false;
+ }
+
+ hdm0_ctrl = cache_mem[R_CXL_HDM_DECODER0_CTRL];
+ iw = FIELD_EX32(hdm0_ctrl, CXL_HDM_DECODER0_CTRL, IW);
+ ig = FIELD_EX32(hdm0_ctrl, CXL_HDM_DECODER0_CTRL, IG);
+
+ *dpa = (MAKE_64BIT_MASK(0, 8 + ig) & hpa_offset) |
+ ((MAKE_64BIT_MASK(8 + ig + iw, 64 - 8 - ig - iw) & hpa_offset) >> iw);
+
+ return true;
+}
+
+MemTxResult cxl_type3_read(PCIDevice *d, hwaddr host_addr, uint64_t *data,
+ unsigned size, MemTxAttrs attrs)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(d);
+ uint64_t dpa_offset;
+ MemoryRegion *mr;
+
+ /* TODO support volatile region */
+ mr = host_memory_backend_get_memory(ct3d->hostmem);
+ if (!mr) {
+ return MEMTX_ERROR;
+ }
+
+ if (!cxl_type3_dpa(ct3d, host_addr, &dpa_offset)) {
+ return MEMTX_ERROR;
+ }
+
+ if (dpa_offset > int128_get64(mr->size)) {
+ return MEMTX_ERROR;
+ }
+
+ return address_space_read(&ct3d->hostmem_as, dpa_offset, attrs, data, size);
+}
+
+MemTxResult cxl_type3_write(PCIDevice *d, hwaddr host_addr, uint64_t data,
+ unsigned size, MemTxAttrs attrs)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(d);
+ uint64_t dpa_offset;
+ MemoryRegion *mr;
+
+ mr = host_memory_backend_get_memory(ct3d->hostmem);
+ if (!mr) {
+ return MEMTX_OK;
+ }
+
+ if (!cxl_type3_dpa(ct3d, host_addr, &dpa_offset)) {
+ return MEMTX_OK;
+ }
+
+ if (dpa_offset > int128_get64(mr->size)) {
+ return MEMTX_OK;
+ }
+ return address_space_write(&ct3d->hostmem_as, dpa_offset, attrs,
+ &data, size);
}
static void ct3d_reset(DeviceState *dev)
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 4285fbda08..1e141b6621 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -239,6 +239,7 @@ struct CXLType3Dev {
HostMemoryBackend *lsa;
/* State */
+ AddressSpace hostmem_as;
CXLComponentState cxl_cstate;
CXLDeviceState cxl_dstate;
};
@@ -259,4 +260,9 @@ struct CXLType3Class {
uint64_t offset);
};
+MemTxResult cxl_type3_read(PCIDevice *d, hwaddr host_addr, uint64_t *data,
+ unsigned size, MemTxAttrs attrs);
+MemTxResult cxl_type3_write(PCIDevice *d, hwaddr host_addr, uint64_t data,
+ unsigned size, MemTxAttrs attrs);
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 33/45] cxl/cxl-host: Add memops for CFMWS region.
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
These memops perform interleave decoding, walking down the
CXL topology from CFMWS described host interleave
decoder via CXL host bridge HDM decoders, through the CXL
root ports and finally call CXL type 3 specific read and write
functions.
Note that, whilst functional the current implementation does
not support:
* switches
* multiple HDM decoders at a given level.
* unaligned accesses across the interleave boundaries
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
---
hw/cxl/cxl-host-stubs.c | 2 +
hw/cxl/cxl-host.c | 128 ++++++++++++++++++++++++++++++++++++++++
include/hw/cxl/cxl.h | 2 +
3 files changed, 132 insertions(+)
diff --git a/hw/cxl/cxl-host-stubs.c b/hw/cxl/cxl-host-stubs.c
index f8fd278d5d..24465a52ab 100644
--- a/hw/cxl/cxl-host-stubs.c
+++ b/hw/cxl/cxl-host-stubs.c
@@ -12,3 +12,5 @@ void cxl_fixed_memory_window_config(MachineState *ms,
Error **errp) {};
void cxl_fixed_memory_window_link_targets(Error **errp) {};
+
+const MemoryRegionOps cfmws_ops;
diff --git a/hw/cxl/cxl-host.c b/hw/cxl/cxl-host.c
index ec5a75cbf5..469b3c4ced 100644
--- a/hw/cxl/cxl-host.c
+++ b/hw/cxl/cxl-host.c
@@ -15,6 +15,10 @@
#include "qapi/qapi-visit-machine.h"
#include "hw/cxl/cxl.h"
+#include "hw/pci/pci_bus.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pci_host.h"
+#include "hw/pci/pcie_port.h"
void cxl_fixed_memory_window_config(MachineState *ms,
CXLFixedMemoryWindowOptions *object,
@@ -92,3 +96,127 @@ void cxl_fixed_memory_window_link_targets(Error **errp)
}
}
}
+
+/* TODO: support, multiple hdm decoders */
+static bool cxl_hdm_find_target(uint32_t *cache_mem, hwaddr addr,
+ uint8_t *target)
+{
+ uint32_t ctrl;
+ uint32_t ig_enc;
+ uint32_t iw_enc;
+ uint32_t target_reg;
+ uint32_t target_idx;
+
+ ctrl = cache_mem[R_CXL_HDM_DECODER0_CTRL];
+ if (!FIELD_EX32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED)) {
+ return false;
+ }
+
+ ig_enc = FIELD_EX32(ctrl, CXL_HDM_DECODER0_CTRL, IG);
+ iw_enc = FIELD_EX32(ctrl, CXL_HDM_DECODER0_CTRL, IW);
+ target_idx = (addr / cxl_decode_ig(ig_enc)) % (1 << iw_enc);
+
+ if (target_idx > 4) {
+ target_reg = cache_mem[R_CXL_HDM_DECODER0_TARGET_LIST_LO];
+ target_reg >>= target_idx * 8;
+ } else {
+ target_reg = cache_mem[R_CXL_HDM_DECODER0_TARGET_LIST_LO];
+ target_reg >>= (target_idx - 4) * 8;
+ }
+ *target = target_reg & 0xff;
+
+ return true;
+}
+
+static PCIDevice *cxl_cfmws_find_device(CXLFixedWindow *fw, hwaddr addr)
+{
+ CXLComponentState *hb_cstate;
+ PCIHostState *hb;
+ int rb_index;
+ uint32_t *cache_mem;
+ uint8_t target;
+ bool target_found;
+ PCIDevice *rp, *d;
+
+ /* Address is relative to memory region. Convert to HPA */
+ addr += fw->base;
+
+ rb_index = (addr / cxl_decode_ig(fw->enc_int_gran)) % fw->num_targets;
+ hb = PCI_HOST_BRIDGE(fw->target_hbs[rb_index]->cxl.cxl_host_bridge);
+ if (!hb || !hb->bus || !pci_bus_is_cxl(hb->bus)) {
+ return NULL;
+ }
+
+ hb_cstate = cxl_get_hb_cstate(hb);
+ if (!hb_cstate) {
+ return NULL;
+ }
+
+ cache_mem = hb_cstate->crb.cache_mem_registers;
+
+ target_found = cxl_hdm_find_target(cache_mem, addr, &target);
+ if (!target_found) {
+ return NULL;
+ }
+
+ rp = pcie_find_port_by_pn(hb->bus, target);
+ if (!rp) {
+ return NULL;
+ }
+
+ d = pci_bridge_get_sec_bus(PCI_BRIDGE(rp))->devices[0];
+
+ if (!d || !object_dynamic_cast(OBJECT(d), TYPE_CXL_TYPE3)) {
+ return NULL;
+ }
+
+ return d;
+}
+
+static MemTxResult cxl_read_cfmws(void *opaque, hwaddr addr, uint64_t *data,
+ unsigned size, MemTxAttrs attrs)
+{
+ CXLFixedWindow *fw = opaque;
+ PCIDevice *d;
+
+ d = cxl_cfmws_find_device(fw, addr);
+ if (d == NULL) {
+ *data = 0;
+ /* Reads to invalid address return poison */
+ return MEMTX_ERROR;
+ }
+
+ return cxl_type3_read(d, addr + fw->base, data, size, attrs);
+}
+
+static MemTxResult cxl_write_cfmws(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size,
+ MemTxAttrs attrs)
+{
+ CXLFixedWindow *fw = opaque;
+ PCIDevice *d;
+
+ d = cxl_cfmws_find_device(fw, addr);
+ if (d == NULL) {
+ /* Writes to invalid address are silent */
+ return MEMTX_OK;
+ }
+
+ return cxl_type3_write(d, addr + fw->base, data, size, attrs);
+}
+
+const MemoryRegionOps cfmws_ops = {
+ .read_with_attrs = cxl_read_cfmws,
+ .write_with_attrs = cxl_write_cfmws,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = true,
+ },
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = true,
+ },
+};
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index dce38124db..21d28ca110 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -56,4 +56,6 @@ void cxl_fixed_memory_window_config(MachineState *ms,
Error **errp);
void cxl_fixed_memory_window_link_targets(Error **errp);
+extern const MemoryRegionOps cfmws_ops;
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 33/45] cxl/cxl-host: Add memops for CFMWS region.
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
These memops perform interleave decoding, walking down the
CXL topology from CFMWS described host interleave
decoder via CXL host bridge HDM decoders, through the CXL
root ports and finally call CXL type 3 specific read and write
functions.
Note that, whilst functional the current implementation does
not support:
* switches
* multiple HDM decoders at a given level.
* unaligned accesses across the interleave boundaries
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
---
hw/cxl/cxl-host-stubs.c | 2 +
hw/cxl/cxl-host.c | 128 ++++++++++++++++++++++++++++++++++++++++
include/hw/cxl/cxl.h | 2 +
3 files changed, 132 insertions(+)
diff --git a/hw/cxl/cxl-host-stubs.c b/hw/cxl/cxl-host-stubs.c
index f8fd278d5d..24465a52ab 100644
--- a/hw/cxl/cxl-host-stubs.c
+++ b/hw/cxl/cxl-host-stubs.c
@@ -12,3 +12,5 @@ void cxl_fixed_memory_window_config(MachineState *ms,
Error **errp) {};
void cxl_fixed_memory_window_link_targets(Error **errp) {};
+
+const MemoryRegionOps cfmws_ops;
diff --git a/hw/cxl/cxl-host.c b/hw/cxl/cxl-host.c
index ec5a75cbf5..469b3c4ced 100644
--- a/hw/cxl/cxl-host.c
+++ b/hw/cxl/cxl-host.c
@@ -15,6 +15,10 @@
#include "qapi/qapi-visit-machine.h"
#include "hw/cxl/cxl.h"
+#include "hw/pci/pci_bus.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pci_host.h"
+#include "hw/pci/pcie_port.h"
void cxl_fixed_memory_window_config(MachineState *ms,
CXLFixedMemoryWindowOptions *object,
@@ -92,3 +96,127 @@ void cxl_fixed_memory_window_link_targets(Error **errp)
}
}
}
+
+/* TODO: support, multiple hdm decoders */
+static bool cxl_hdm_find_target(uint32_t *cache_mem, hwaddr addr,
+ uint8_t *target)
+{
+ uint32_t ctrl;
+ uint32_t ig_enc;
+ uint32_t iw_enc;
+ uint32_t target_reg;
+ uint32_t target_idx;
+
+ ctrl = cache_mem[R_CXL_HDM_DECODER0_CTRL];
+ if (!FIELD_EX32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED)) {
+ return false;
+ }
+
+ ig_enc = FIELD_EX32(ctrl, CXL_HDM_DECODER0_CTRL, IG);
+ iw_enc = FIELD_EX32(ctrl, CXL_HDM_DECODER0_CTRL, IW);
+ target_idx = (addr / cxl_decode_ig(ig_enc)) % (1 << iw_enc);
+
+ if (target_idx > 4) {
+ target_reg = cache_mem[R_CXL_HDM_DECODER0_TARGET_LIST_LO];
+ target_reg >>= target_idx * 8;
+ } else {
+ target_reg = cache_mem[R_CXL_HDM_DECODER0_TARGET_LIST_LO];
+ target_reg >>= (target_idx - 4) * 8;
+ }
+ *target = target_reg & 0xff;
+
+ return true;
+}
+
+static PCIDevice *cxl_cfmws_find_device(CXLFixedWindow *fw, hwaddr addr)
+{
+ CXLComponentState *hb_cstate;
+ PCIHostState *hb;
+ int rb_index;
+ uint32_t *cache_mem;
+ uint8_t target;
+ bool target_found;
+ PCIDevice *rp, *d;
+
+ /* Address is relative to memory region. Convert to HPA */
+ addr += fw->base;
+
+ rb_index = (addr / cxl_decode_ig(fw->enc_int_gran)) % fw->num_targets;
+ hb = PCI_HOST_BRIDGE(fw->target_hbs[rb_index]->cxl.cxl_host_bridge);
+ if (!hb || !hb->bus || !pci_bus_is_cxl(hb->bus)) {
+ return NULL;
+ }
+
+ hb_cstate = cxl_get_hb_cstate(hb);
+ if (!hb_cstate) {
+ return NULL;
+ }
+
+ cache_mem = hb_cstate->crb.cache_mem_registers;
+
+ target_found = cxl_hdm_find_target(cache_mem, addr, &target);
+ if (!target_found) {
+ return NULL;
+ }
+
+ rp = pcie_find_port_by_pn(hb->bus, target);
+ if (!rp) {
+ return NULL;
+ }
+
+ d = pci_bridge_get_sec_bus(PCI_BRIDGE(rp))->devices[0];
+
+ if (!d || !object_dynamic_cast(OBJECT(d), TYPE_CXL_TYPE3)) {
+ return NULL;
+ }
+
+ return d;
+}
+
+static MemTxResult cxl_read_cfmws(void *opaque, hwaddr addr, uint64_t *data,
+ unsigned size, MemTxAttrs attrs)
+{
+ CXLFixedWindow *fw = opaque;
+ PCIDevice *d;
+
+ d = cxl_cfmws_find_device(fw, addr);
+ if (d == NULL) {
+ *data = 0;
+ /* Reads to invalid address return poison */
+ return MEMTX_ERROR;
+ }
+
+ return cxl_type3_read(d, addr + fw->base, data, size, attrs);
+}
+
+static MemTxResult cxl_write_cfmws(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size,
+ MemTxAttrs attrs)
+{
+ CXLFixedWindow *fw = opaque;
+ PCIDevice *d;
+
+ d = cxl_cfmws_find_device(fw, addr);
+ if (d == NULL) {
+ /* Writes to invalid address are silent */
+ return MEMTX_OK;
+ }
+
+ return cxl_type3_write(d, addr + fw->base, data, size, attrs);
+}
+
+const MemoryRegionOps cfmws_ops = {
+ .read_with_attrs = cxl_read_cfmws,
+ .write_with_attrs = cxl_write_cfmws,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = true,
+ },
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = true,
+ },
+};
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index dce38124db..21d28ca110 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -56,4 +56,6 @@ void cxl_fixed_memory_window_config(MachineState *ms,
Error **errp);
void cxl_fixed_memory_window_link_targets(Error **errp);
+extern const MemoryRegionOps cfmws_ops;
+
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 34/45] hw/cxl/component Add a dumb HDM decoder handler
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:40 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
Add a trivial handler for now to cover the root bridge
where we could do some error checking in future.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-component-utils.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
index 69cb07171c..7985c9bfca 100644
--- a/hw/cxl/cxl-component-utils.c
+++ b/hw/cxl/cxl-component-utils.c
@@ -32,6 +32,31 @@ static uint64_t cxl_cache_mem_read_reg(void *opaque, hwaddr offset,
}
}
+static void dumb_hdm_handler(CXLComponentState *cxl_cstate, hwaddr offset,
+ uint32_t value)
+{
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ uint32_t *cache_mem = cregs->cache_mem_registers;
+ bool should_commit = false;
+
+ switch (offset) {
+ case A_CXL_HDM_DECODER0_CTRL:
+ should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
+ break;
+ default:
+ break;
+ }
+
+ memory_region_transaction_begin();
+ stl_le_p((uint8_t *)cache_mem + offset, value);
+ if (should_commit) {
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, ERR, 0);
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
+ }
+ memory_region_transaction_commit();
+}
+
static void cxl_cache_mem_write_reg(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
@@ -50,6 +75,12 @@ static void cxl_cache_mem_write_reg(void *opaque, hwaddr offset, uint64_t value,
value |= ~mask & cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)];
if (cregs->special_ops && cregs->special_ops->write) {
cregs->special_ops->write(cxl_cstate, offset, value, size);
+ return;
+ }
+
+ if (offset >= A_CXL_HDM_DECODER_CAPABILITY &&
+ offset <= A_CXL_HDM_DECODER0_TARGET_LIST_HI) {
+ dumb_hdm_handler(cxl_cstate, offset, value);
} else {
cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)] = value;
}
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 34/45] hw/cxl/component Add a dumb HDM decoder handler
@ 2022-04-29 14:40 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:40 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
Add a trivial handler for now to cover the root bridge
where we could do some error checking in future.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-component-utils.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
index 69cb07171c..7985c9bfca 100644
--- a/hw/cxl/cxl-component-utils.c
+++ b/hw/cxl/cxl-component-utils.c
@@ -32,6 +32,31 @@ static uint64_t cxl_cache_mem_read_reg(void *opaque, hwaddr offset,
}
}
+static void dumb_hdm_handler(CXLComponentState *cxl_cstate, hwaddr offset,
+ uint32_t value)
+{
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ uint32_t *cache_mem = cregs->cache_mem_registers;
+ bool should_commit = false;
+
+ switch (offset) {
+ case A_CXL_HDM_DECODER0_CTRL:
+ should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
+ break;
+ default:
+ break;
+ }
+
+ memory_region_transaction_begin();
+ stl_le_p((uint8_t *)cache_mem + offset, value);
+ if (should_commit) {
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, ERR, 0);
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
+ }
+ memory_region_transaction_commit();
+}
+
static void cxl_cache_mem_write_reg(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
@@ -50,6 +75,12 @@ static void cxl_cache_mem_write_reg(void *opaque, hwaddr offset, uint64_t value,
value |= ~mask & cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)];
if (cregs->special_ops && cregs->special_ops->write) {
cregs->special_ops->write(cxl_cstate, offset, value, size);
+ return;
+ }
+
+ if (offset >= A_CXL_HDM_DECODER_CAPABILITY &&
+ offset <= A_CXL_HDM_DECODER0_TARGET_LIST_HI) {
+ dumb_hdm_handler(cxl_cstate, offset, value);
} else {
cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)] = value;
}
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 35/45] i386/pc: Enable CXL fixed memory windows
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:41 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
Add the CFMWs memory regions to the memorymap and adjust the
PCI window to avoid hitting the same memory.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
---
hw/i386/pc.c | 31 ++++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index b56af1e4e7..dd7cffd340 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -817,7 +817,7 @@ void pc_memory_init(PCMachineState *pcms,
MachineClass *mc = MACHINE_GET_CLASS(machine);
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
X86MachineState *x86ms = X86_MACHINE(pcms);
- hwaddr cxl_base;
+ hwaddr cxl_base, cxl_resv_end = 0;
assert(machine->ram_size == x86ms->below_4g_mem_size +
x86ms->above_4g_mem_size);
@@ -925,6 +925,24 @@ void pc_memory_init(PCMachineState *pcms,
e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
memory_region_add_subregion(system_memory, cxl_base, mr);
+ cxl_resv_end = cxl_base + cxl_size;
+ if (machine->cxl_devices_state->fixed_windows) {
+ hwaddr cxl_fmw_base;
+ GList *it;
+
+ cxl_fmw_base = ROUND_UP(cxl_base + cxl_size, 256 * MiB);
+ for (it = machine->cxl_devices_state->fixed_windows; it; it = it->next) {
+ CXLFixedWindow *fw = it->data;
+
+ fw->base = cxl_fmw_base;
+ memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops, fw,
+ "cxl-fixed-memory-region", fw->size);
+ memory_region_add_subregion(system_memory, fw->base, &fw->mr);
+ e820_add_entry(fw->base, fw->size, E820_RESERVED);
+ cxl_fmw_base += fw->size;
+ cxl_resv_end = cxl_fmw_base;
+ }
+ }
}
/* Initialize PC system firmware */
@@ -954,6 +972,10 @@ void pc_memory_init(PCMachineState *pcms,
if (!pcmc->broken_reserved_end) {
res_mem_end += memory_region_size(&machine->device_memory->mr);
}
+
+ if (machine->cxl_devices_state->is_enabled) {
+ res_mem_end = cxl_resv_end;
+ }
*val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));
fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val));
}
@@ -990,6 +1012,13 @@ uint64_t pc_pci_hole64_start(void)
if (ms->cxl_devices_state->host_mr.addr) {
hole64_start = ms->cxl_devices_state->host_mr.addr +
memory_region_size(&ms->cxl_devices_state->host_mr);
+ if (ms->cxl_devices_state->fixed_windows) {
+ GList *it;
+ for (it = ms->cxl_devices_state->fixed_windows; it; it = it->next) {
+ CXLFixedWindow *fw = it->data;
+ hole64_start = fw->mr.addr + memory_region_size(&fw->mr);
+ }
+ }
} else if (pcmc->has_reserved_memory && ms->device_memory->base) {
hole64_start = ms->device_memory->base;
if (!pcmc->broken_reserved_end) {
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 35/45] i386/pc: Enable CXL fixed memory windows
@ 2022-04-29 14:41 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Jonathan Cameron <jonathan.cameron@huawei.com>
Add the CFMWs memory regions to the memorymap and adjust the
PCI window to avoid hitting the same memory.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
---
hw/i386/pc.c | 31 ++++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index b56af1e4e7..dd7cffd340 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -817,7 +817,7 @@ void pc_memory_init(PCMachineState *pcms,
MachineClass *mc = MACHINE_GET_CLASS(machine);
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
X86MachineState *x86ms = X86_MACHINE(pcms);
- hwaddr cxl_base;
+ hwaddr cxl_base, cxl_resv_end = 0;
assert(machine->ram_size == x86ms->below_4g_mem_size +
x86ms->above_4g_mem_size);
@@ -925,6 +925,24 @@ void pc_memory_init(PCMachineState *pcms,
e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
memory_region_add_subregion(system_memory, cxl_base, mr);
+ cxl_resv_end = cxl_base + cxl_size;
+ if (machine->cxl_devices_state->fixed_windows) {
+ hwaddr cxl_fmw_base;
+ GList *it;
+
+ cxl_fmw_base = ROUND_UP(cxl_base + cxl_size, 256 * MiB);
+ for (it = machine->cxl_devices_state->fixed_windows; it; it = it->next) {
+ CXLFixedWindow *fw = it->data;
+
+ fw->base = cxl_fmw_base;
+ memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops, fw,
+ "cxl-fixed-memory-region", fw->size);
+ memory_region_add_subregion(system_memory, fw->base, &fw->mr);
+ e820_add_entry(fw->base, fw->size, E820_RESERVED);
+ cxl_fmw_base += fw->size;
+ cxl_resv_end = cxl_fmw_base;
+ }
+ }
}
/* Initialize PC system firmware */
@@ -954,6 +972,10 @@ void pc_memory_init(PCMachineState *pcms,
if (!pcmc->broken_reserved_end) {
res_mem_end += memory_region_size(&machine->device_memory->mr);
}
+
+ if (machine->cxl_devices_state->is_enabled) {
+ res_mem_end = cxl_resv_end;
+ }
*val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));
fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val));
}
@@ -990,6 +1012,13 @@ uint64_t pc_pci_hole64_start(void)
if (ms->cxl_devices_state->host_mr.addr) {
hole64_start = ms->cxl_devices_state->host_mr.addr +
memory_region_size(&ms->cxl_devices_state->host_mr);
+ if (ms->cxl_devices_state->fixed_windows) {
+ GList *it;
+ for (it = ms->cxl_devices_state->fixed_windows; it; it = it->next) {
+ CXLFixedWindow *fw = it->data;
+ hole64_start = fw->mr.addr + memory_region_size(&fw->mr);
+ }
+ }
} else if (pcmc->has_reserved_memory && ms->device_memory->base) {
hole64_start = ms->device_memory->base;
if (!pcmc->broken_reserved_end) {
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 36/45] tests/acpi: q35: Allow addition of a CXL test.
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:41 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Add exceptions for the DSDT and the new CEDT tables
specific to a new CXL test in the following patch.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
tests/data/acpi/q35/CEDT.cxl | 0
tests/data/acpi/q35/DSDT.cxl | 0
tests/qtest/bios-tables-test-allowed-diff.h | 2 ++
3 files changed, 2 insertions(+)
diff --git a/tests/data/acpi/q35/CEDT.cxl b/tests/data/acpi/q35/CEDT.cxl
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/tests/data/acpi/q35/DSDT.cxl b/tests/data/acpi/q35/DSDT.cxl
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h
index dfb8523c8b..7c7f9fbc44 100644
--- a/tests/qtest/bios-tables-test-allowed-diff.h
+++ b/tests/qtest/bios-tables-test-allowed-diff.h
@@ -1 +1,3 @@
/* List of comma-separated changed AML files to ignore */
+"tests/data/acpi/q35/DSDT.cxl",
+"tests/data/acpi/q35/CEDT.cxl",
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 36/45] tests/acpi: q35: Allow addition of a CXL test.
@ 2022-04-29 14:41 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Add exceptions for the DSDT and the new CEDT tables
specific to a new CXL test in the following patch.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
tests/data/acpi/q35/CEDT.cxl | 0
tests/data/acpi/q35/DSDT.cxl | 0
tests/qtest/bios-tables-test-allowed-diff.h | 2 ++
3 files changed, 2 insertions(+)
diff --git a/tests/data/acpi/q35/CEDT.cxl b/tests/data/acpi/q35/CEDT.cxl
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/tests/data/acpi/q35/DSDT.cxl b/tests/data/acpi/q35/DSDT.cxl
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h
index dfb8523c8b..7c7f9fbc44 100644
--- a/tests/qtest/bios-tables-test-allowed-diff.h
+++ b/tests/qtest/bios-tables-test-allowed-diff.h
@@ -1 +1,3 @@
/* List of comma-separated changed AML files to ignore */
+"tests/data/acpi/q35/DSDT.cxl",
+"tests/data/acpi/q35/CEDT.cxl",
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 37/45] qtests/bios-tables-test: Add a test for CXL emulation.
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:41 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
The DSDT includes several CXL specific elements and the CEDT
table is only present if we enable CXL.
The test exercises all current functionality with several
CFMWS, CHBS structures in CEDT and ACPI0016/ACPI00017 and _OSC
entries in DSDT.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
tests/qtest/bios-tables-test.c | 44 ++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c
index 5dddedabcd..a4a46e97f0 100644
--- a/tests/qtest/bios-tables-test.c
+++ b/tests/qtest/bios-tables-test.c
@@ -1536,6 +1536,49 @@ static void test_acpi_q35_viot(void)
free_test_data(&data);
}
+static void test_acpi_q35_cxl(void)
+{
+ gchar *tmp_path = g_dir_make_tmp("qemu-test-cxl.XXXXXX", NULL);
+ gchar *params;
+
+ test_data data = {
+ .machine = MACHINE_Q35,
+ .variant = ".cxl",
+ };
+ /*
+ * A complex CXL setup.
+ */
+ params = g_strdup_printf(" -machine cxl=on"
+ " -object memory-backend-file,id=cxl-mem1,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=cxl-mem2,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=cxl-mem3,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=cxl-mem4,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=lsa1,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=lsa2,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=lsa3,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=lsa4,mem-path=%s,size=256M"
+ " -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1"
+ " -device pxb-cxl,bus_nr=222,bus=pcie.0,id=cxl.2"
+ " -device cxl-rp,port=0,bus=cxl.1,id=rp1,chassis=0,slot=2"
+ " -device cxl-type3,bus=rp1,memdev=cxl-mem1,lsa=lsa1"
+ " -device cxl-rp,port=1,bus=cxl.1,id=rp2,chassis=0,slot=3"
+ " -device cxl-type3,bus=rp2,memdev=cxl-mem2,lsa=lsa2"
+ " -device cxl-rp,port=0,bus=cxl.2,id=rp3,chassis=0,slot=5"
+ " -device cxl-type3,bus=rp3,memdev=cxl-mem3,lsa=lsa3"
+ " -device cxl-rp,port=1,bus=cxl.2,id=rp4,chassis=0,slot=6"
+ " -device cxl-type3,bus=rp4,memdev=cxl-mem4,lsa=lsa4"
+ " -cxl-fixed-memory-window targets.0=cxl.1,size=4G,interleave-granularity=8k"
+ " -cxl-fixed-memory-window targets.0=cxl.1,targets.1=cxl.2,size=4G,interleave-granularity=8k",
+ tmp_path, tmp_path, tmp_path, tmp_path,
+ tmp_path, tmp_path, tmp_path, tmp_path);
+ test_acpi_one(params, &data);
+
+ g_free(params);
+ g_assert(g_rmdir(tmp_path) == 0);
+ g_free(tmp_path);
+ free_test_data(&data);
+}
+
static void test_acpi_virt_viot(void)
{
test_data data = {
@@ -1741,6 +1784,7 @@ int main(int argc, char *argv[])
qtest_add_func("acpi/q35/kvm/dmar", test_acpi_q35_kvm_dmar);
}
qtest_add_func("acpi/q35/viot", test_acpi_q35_viot);
+ qtest_add_func("acpi/q35/cxl", test_acpi_q35_cxl);
qtest_add_func("acpi/q35/slic", test_acpi_q35_slic);
} else if (strcmp(arch, "aarch64") == 0) {
if (has_tcg) {
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 37/45] qtests/bios-tables-test: Add a test for CXL emulation.
@ 2022-04-29 14:41 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
The DSDT includes several CXL specific elements and the CEDT
table is only present if we enable CXL.
The test exercises all current functionality with several
CFMWS, CHBS structures in CEDT and ACPI0016/ACPI00017 and _OSC
entries in DSDT.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
tests/qtest/bios-tables-test.c | 44 ++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c
index 5dddedabcd..a4a46e97f0 100644
--- a/tests/qtest/bios-tables-test.c
+++ b/tests/qtest/bios-tables-test.c
@@ -1536,6 +1536,49 @@ static void test_acpi_q35_viot(void)
free_test_data(&data);
}
+static void test_acpi_q35_cxl(void)
+{
+ gchar *tmp_path = g_dir_make_tmp("qemu-test-cxl.XXXXXX", NULL);
+ gchar *params;
+
+ test_data data = {
+ .machine = MACHINE_Q35,
+ .variant = ".cxl",
+ };
+ /*
+ * A complex CXL setup.
+ */
+ params = g_strdup_printf(" -machine cxl=on"
+ " -object memory-backend-file,id=cxl-mem1,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=cxl-mem2,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=cxl-mem3,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=cxl-mem4,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=lsa1,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=lsa2,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=lsa3,mem-path=%s,size=256M"
+ " -object memory-backend-file,id=lsa4,mem-path=%s,size=256M"
+ " -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1"
+ " -device pxb-cxl,bus_nr=222,bus=pcie.0,id=cxl.2"
+ " -device cxl-rp,port=0,bus=cxl.1,id=rp1,chassis=0,slot=2"
+ " -device cxl-type3,bus=rp1,memdev=cxl-mem1,lsa=lsa1"
+ " -device cxl-rp,port=1,bus=cxl.1,id=rp2,chassis=0,slot=3"
+ " -device cxl-type3,bus=rp2,memdev=cxl-mem2,lsa=lsa2"
+ " -device cxl-rp,port=0,bus=cxl.2,id=rp3,chassis=0,slot=5"
+ " -device cxl-type3,bus=rp3,memdev=cxl-mem3,lsa=lsa3"
+ " -device cxl-rp,port=1,bus=cxl.2,id=rp4,chassis=0,slot=6"
+ " -device cxl-type3,bus=rp4,memdev=cxl-mem4,lsa=lsa4"
+ " -cxl-fixed-memory-window targets.0=cxl.1,size=4G,interleave-granularity=8k"
+ " -cxl-fixed-memory-window targets.0=cxl.1,targets.1=cxl.2,size=4G,interleave-granularity=8k",
+ tmp_path, tmp_path, tmp_path, tmp_path,
+ tmp_path, tmp_path, tmp_path, tmp_path);
+ test_acpi_one(params, &data);
+
+ g_free(params);
+ g_assert(g_rmdir(tmp_path) == 0);
+ g_free(tmp_path);
+ free_test_data(&data);
+}
+
static void test_acpi_virt_viot(void)
{
test_data data = {
@@ -1741,6 +1784,7 @@ int main(int argc, char *argv[])
qtest_add_func("acpi/q35/kvm/dmar", test_acpi_q35_kvm_dmar);
}
qtest_add_func("acpi/q35/viot", test_acpi_q35_viot);
+ qtest_add_func("acpi/q35/cxl", test_acpi_q35_cxl);
qtest_add_func("acpi/q35/slic", test_acpi_q35_slic);
} else if (strcmp(arch, "aarch64") == 0) {
if (has_tcg) {
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 38/45] tests/acpi: Add tables for CXL emulation.
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:41 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Tables that differ from normal Q35 tables when running the CXL test.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
tests/data/acpi/q35/CEDT.cxl | Bin 0 -> 184 bytes
tests/data/acpi/q35/DSDT.cxl | Bin 0 -> 9615 bytes
tests/qtest/bios-tables-test-allowed-diff.h | 2 --
3 files changed, 2 deletions(-)
diff --git a/tests/data/acpi/q35/CEDT.cxl b/tests/data/acpi/q35/CEDT.cxl
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..b8fa06b00e65712e91e0a5ea0d9277e0146d1c00 100644
GIT binary patch
literal 184
zcmZ>EbqU$Qz`(%x(aGQ0BUr&HBEVSz2pEB4AU23*U{GMV2P7eE5T6mshKVRJ@Sw=U
r)I#JL88kqeKtKSd14gp~1^Iy(qF)E31_T6{AT-z>kXmGQAh!SjnYIc6
literal 0
HcmV?d00001
diff --git a/tests/data/acpi/q35/DSDT.cxl b/tests/data/acpi/q35/DSDT.cxl
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..c1206defed0154e9024702bba88453b2790a306d 100644
GIT binary patch
literal 9615
zcmeHN&2JmW9i1g9X|-HQONzE^`9p-`^eaU|`6EeNq%pZmk+ejbCaE|94R9$bt!$^r
zB8h=GhEZ7o632(O3FDx*(k=t^*8T%U4YY^$W}qk<pg_<bddaax5g!t>?>Dm}&yW-l
z9}AR+<^E>ho8P?InSIL{dUdby)5jSzBDphev7XMoSas9*7>qGGr*EeeJI|V1UartG
z;*prqydLN0IONRKx4qnI!T9;6|B>&%@vd*Q1GaX@xwX~~-oD|lF#=s)3oMIHocwgF
zo@+I?U90MrGG?n-^6czA%QRcAIE$LCtXE@ZYqjLD)XGHbOx=y$yu@7Z++w#f*4a$V
zT28b4x8t8L96a^Wxi_+RpZn_%ZeFrt035@&iSOe99sH}lb=dDZA9OAl*ND!qEp}%=
z=<v&;%%LlRPbIf)QAAZO_AWKIpY>{4m$z}MTB&B-%p%(5*6N7`>)^X{jM>yV^!ZJ{
z-~XLBWzH4mlue;BZx*ZhhE!=l8>wn;6|0Rhvl+YhAkJdV>kh@UFXSs;x?1yE>D1G$
zdLzpMD)9p<YQN=Mj^DN4@A$0a$NT*r>rTJlX|oU8Hv7ka#(J!0&4{)otm$_qsV(;&
zuoz=#&DWl!)=+;px93asY>Rg>(l4MX)l%(j#PTiMS)O?+DuIM*Zl74rc>s%h6h-UN
zDw$@VwWnbC%x8vCFgDl*zK=wZt+{=)d}eirH8ZQROl#~2^-y#B*h;mrDC>@i`)z1g
z$C@e_Z${sYn&y!$Uh^^cOnHYh1~hte1m}MAew3L<9L{;X)^K-P6A$knuR34>Gt48*
zKo?aK5Bq4V>ed@Z{H|@8xHS~G=)2W44qm#sRnMQsEcl~s;l{-&aC4dbX<W!v$~7Z?
zPtYiEbCuO{x?1vHOgD|(io48Gk5}FN=}7Z2iu(OvlMulb;{u~PnqQ~l9!ouu1!okB
z>I&%Khgd)5jaR*TdAhq2PK|rd{OO<dlW&#ZpZl!5|MzY=pt@f9k>7o+bCGrTcP>~F
z%z$fr9N8GQeb!4vjq7w^x97ThIv1^pAUPIcQ>-2MH`<K#+Ge%nF0qu|!nYA@Qsn&P
zC4&Zw<9@~`a<$f|CYN8|O2%UtoouDDoM+<P!1)qO+Ei{u5ENt(MNnkPsTkUUnIv#w
zL@WTO#Wl_YREESv{Tv(NOkl%^m=YRcoCzprA|xhS!?97$lr4xdVoGRKFahOEgv69t
zFs}rb*AwGR35^M+Y&=3$=a{B*j58&4OfY5R5vn@JHJ#&}DWT)KPK2t?2~FpOrgK8q
ziBQ#PYC26#r>W~isOrQMNa^WGP3NSp6QQcp(sWvyPD|H`P}LdNbjCHEaa|`uRVSW>
z%Kfx8owlwMp{jFA(>bN-oYHk7RCP{kI;S<A)4EQCs?Hfr=ZvOvM%Rf@)#+$D9ZjdB
z>qMyPOlUe2n$Co-6QQazsp(8=I+MCigsRS2P3Nqpb5_@hP}P~zbfz?&DP1Q*Rp%Z}
z=N?Vx9$hCwRp(w!=Uz?cUR@_bRVUsgF#6<kXin2Pr|U$h>fER4+^6Z>r|U$h>fFzn
z+3-oYpEGme!*0J|x(`EQdLedRW6o>Ld7X(+WggI&2Q=mZorzFo9@LlzHReH`iBM%8
z(wK)d<{_PlP-PzGOzAR*Ia5C44-2Mza3dt9yn_o`&IK*!f}Rth$Z5hrvx<Qh>LsM+
zW@_LZi9-WLfV3irB9KX8paRD&$za5i?K6;6Kz9rjp_B##6<BGY3X}{~Kz9rjAzC91
zRA9r1a;gR@pgRVN5G~?Z7^uL8QK*qa$v_2EhN?~&sHm1RVW0|>3>2YsMKVx?QYQ>l
zU^x>8szAv=1(fF`14Srx!axO<Ghv_#lnhirIg<<&q0|Wj6<E%MfhtfkPyyvkGEju_
ze!@TnmNQ|X3X}{~Ksl2P6rt1!0~J`#gn=qhGEf2KOfpb}QYQ>lU^x>8szAv=1(Y+%
zKoLrvFi?TzOc<yFB?A>u&LjgxD0RX>1(q{mpbC@>R6seC3>2Z%2?G^a&V+#~P%=;f
z<xDbAgi<FARA4z12C6{GKn0XD$v_cGoiI>=<xCi;0wn_#P|hR+MJRQ`Kn0dFVW0|>
z3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=rz^3{+q_69%e4$v_2^Gs!>^N}VuJf#pmX
zr~)Me6;RG314Srx!axO<Ghv_#lnhirIg<<&q0|Wj6<E%MfhtfkPyyvkGEjt4Ck#|z
zITHq|K*>M_lrzad5lWpfP=V!47^ngz0~JutBm+e#b;3XqDF%v2HBf}Afg)54RAItE
z6($*|!XyJ#m@rU<2?JG_WS|O@3{+vlKouqoRAG{VDoip^g$V;ym@rU<Nd~Gg$v_n*
z3>1;PyD(5hxMRFC$v_d}Hpq~evTtFah-BZwKoQBlB?Cn$`<4t8A(o2fTd+{pwLARB
zYL9-9-X5o~Z1ehepNi72R9e-b^$w$2JDY{$p3Tw0rGsZOti7Dg)A<q|3Unx%soBz5
ztOj%^uUcE1SY(;(S@G0~(pk4Q2|z8An6~2Yjk8I<5_E;#q%vy^$5L>0)0$y)hDOw|
z^s+L6cZ955^02X7LyJKsnq5!qwPxR&W|L948^iOP;Yp0ui_{EX2kKE1(3)&2(eg@l
zc8$)hEnYH1>ro5{x5neSR=rj?Zf=Hcp!8H8X3q^|$KuIX&Yn}U=XmxU+NWmErABAZ
zHMh&8T`Z+xxi8diMIIr&tE6{%dUqhbyGwdEOz#bdx3Hk~mDPJndXJ~~2GV=Gr1!$~
z`N8zDM@XMn(&u^l{6PBrF6r}O`lZ42V~>!2NlCxN(=QFAU)m-8QkcFln11{b(ifEU
z1)jbzkiM`>`a+n#IGBFo5z-fx^hKV&IFP=$OZp<x$LLWunBEcT<--H76`1Z~{Z=na
zjq@pwFPhh3b%WE`O6b+$U1O*^Q8u!=p?R6qtHTS(P<5hgWOYOH3`@W?&!jNCl?+uU
z%0^Z<G;dORb$C@7s!o)RtZrx??9r>k`^!*uqHJV!L*sg{UL9U)hN=@~BdZ%4r*nFB
zc+(lGPL%1@IR_rDXK&Bc%Q<YdU|YqGV$I(<^L?>9QMArKT=B2g@^v{%Elf^$)0A6X
zO&4E%BY5TV57V!`{Q9exUt53qb=EZ8>dJCBTBj_lV0>bKVjDJA_2EghbpDBL+0E<U
zpdicAZZ%&q+)|}(xV7>N1{T0GbXYQ2)OE`q7TJ@8jJoywN*Zu4+el-rxl}2c0i!~U
z`s3%h9yCZaaw_XqOPS1KhMFNZj>b|6x3Tn6q-%9H**k6~lev&8j$`#cJK22f{8KTx
zwLwBj04=`{79&}}{O){b@B&E)tQjo34_#SV?)j<m7|D9HM8;rMs9|LNsinPc-L06r
z$S~bX{#-KB57>HOY~1mZoed*k8-d{mtbJ$2{#nO2Zmpxp57q}$a>0XzxGCMaTZ5&z
zE$bh5Cp&Gck2D_#qpo+44)q+}_h9`7wXw}Ex6!KG&vZ`?!T89)?OV5^!BEHGB6yeA
zX=5=T6FZAk;Tl_~TMljO&Bf8;hU!9lF0YO5=JKR_rrxl3>E_X+WvG61UT|SV-vm}<
zu#}(|2Mf{7BU{&e`&k;(nE&`-dSG0eJsRDZ0p)BX5w}c+)dqSGO-*Cdv=JvUZ1cj!
z)B#MMLN(vYXO6LO#?wTiG3A_z(Ir0d!#S0Cnx(!2>>{I%*x3;jJ61|T)vfTBY6xff
z=y~yQ$sKi9JXDP5i1n%2%H=Bbg{?$6b)ObfH)%)s1~47)LbkK_3v_+8T4ko&sI4$M
zclo)CO<~ffYzkvnbmXqED2@N+Uz->HaI^f|=RTZwp8xX~yY3Y)e8s(D><%BJrtwW?
zYMt0U?s~CZ6WZXMKw{c#K1sY2q=!yUq5_w;olhEc=v}%!t!+Z5PEEo*8!Sjhw)lLm
zOx$W)TftjxE5g=-tFN`!@C%5ocb(2UK$Bu;%3~W;VC)oRQIP1YTalfTTv!s_DRJ@4
zxOQdDav1I4-Pm9(xY|bDH#Q6wY~1i^`u2SBlH!e9zP1DYWxxOYmwarpQ%t>*e$el?
z9*ny3OI+!NS0e1j6pLULiG9lcj$;%qr;nu!-co2R*<vi=>k-D1{r|CqKQ#Q0jHOc;
zOFtetmVAtuUyK|}w{hjp&{(n=)(FK|Ix3z@hujxe@aGI==sd&lK1q+!p5d&_i`NXk
zqs{;5QF7ujLk>;xv)pC{<Gy|0HcXToc%#DSbBx^k_D(#7`NP=1`843y=|_FPPe1DE
z6VWCJGqDN(YjK7BN}W3FF0OnLUU^QvvV|^M2<3LQ+Pdh7Zg|Deu6&Fuyj`fUY217Q
ze_sjP#xtCv0D$LZE5p2GDwvG;$4(4JA^x$${|%FcQHa+>Dp%eQ#h*Ch;z7aR57Xo6
zafAQs<8-WAtk%R0puf~StOR{N;$3sNuDkYK+t`Pv!#B?(ef@YVIUY0MdN@DPN}4e%
zf(Ii-C+P}_aK88Ot~R%yTsr59-vCo*^W{}o>M=s&k1cA8oiS&O-e{du6Wq_7;y4Y8
z=61ZE$%y~Ypi910&payv+<$`)q(zV64;-lQm^?X7Cr!MBFNQ>5Bck9TIm%K<P-(FL
E0+(|YhyVZp
literal 0
HcmV?d00001
diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h
index 7c7f9fbc44..dfb8523c8b 100644
--- a/tests/qtest/bios-tables-test-allowed-diff.h
+++ b/tests/qtest/bios-tables-test-allowed-diff.h
@@ -1,3 +1 @@
/* List of comma-separated changed AML files to ignore */
-"tests/data/acpi/q35/DSDT.cxl",
-"tests/data/acpi/q35/CEDT.cxl",
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 38/45] tests/acpi: Add tables for CXL emulation.
@ 2022-04-29 14:41 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Tables that differ from normal Q35 tables when running the CXL test.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
tests/data/acpi/q35/CEDT.cxl | Bin 0 -> 184 bytes
tests/data/acpi/q35/DSDT.cxl | Bin 0 -> 9615 bytes
tests/qtest/bios-tables-test-allowed-diff.h | 2 --
3 files changed, 2 deletions(-)
diff --git a/tests/data/acpi/q35/CEDT.cxl b/tests/data/acpi/q35/CEDT.cxl
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..b8fa06b00e65712e91e0a5ea0d9277e0146d1c00 100644
GIT binary patch
literal 184
zcmZ>EbqU$Qz`(%x(aGQ0BUr&HBEVSz2pEB4AU23*U{GMV2P7eE5T6mshKVRJ@Sw=U
r)I#JL88kqeKtKSd14gp~1^Iy(qF)E31_T6{AT-z>kXmGQAh!SjnYIc6
literal 0
HcmV?d00001
diff --git a/tests/data/acpi/q35/DSDT.cxl b/tests/data/acpi/q35/DSDT.cxl
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..c1206defed0154e9024702bba88453b2790a306d 100644
GIT binary patch
literal 9615
zcmeHN&2JmW9i1g9X|-HQONzE^`9p-`^eaU|`6EeNq%pZmk+ejbCaE|94R9$bt!$^r
zB8h=GhEZ7o632(O3FDx*(k=t^*8T%U4YY^$W}qk<pg_<bddaax5g!t>?>Dm}&yW-l
z9}AR+<^E>ho8P?InSIL{dUdby)5jSzBDphev7XMoSas9*7>qGGr*EeeJI|V1UartG
z;*prqydLN0IONRKx4qnI!T9;6|B>&%@vd*Q1GaX@xwX~~-oD|lF#=s)3oMIHocwgF
zo@+I?U90MrGG?n-^6czA%QRcAIE$LCtXE@ZYqjLD)XGHbOx=y$yu@7Z++w#f*4a$V
zT28b4x8t8L96a^Wxi_+RpZn_%ZeFrt035@&iSOe99sH}lb=dDZA9OAl*ND!qEp}%=
z=<v&;%%LlRPbIf)QAAZO_AWKIpY>{4m$z}MTB&B-%p%(5*6N7`>)^X{jM>yV^!ZJ{
z-~XLBWzH4mlue;BZx*ZhhE!=l8>wn;6|0Rhvl+YhAkJdV>kh@UFXSs;x?1yE>D1G$
zdLzpMD)9p<YQN=Mj^DN4@A$0a$NT*r>rTJlX|oU8Hv7ka#(J!0&4{)otm$_qsV(;&
zuoz=#&DWl!)=+;px93asY>Rg>(l4MX)l%(j#PTiMS)O?+DuIM*Zl74rc>s%h6h-UN
zDw$@VwWnbC%x8vCFgDl*zK=wZt+{=)d}eirH8ZQROl#~2^-y#B*h;mrDC>@i`)z1g
z$C@e_Z${sYn&y!$Uh^^cOnHYh1~hte1m}MAew3L<9L{;X)^K-P6A$knuR34>Gt48*
zKo?aK5Bq4V>ed@Z{H|@8xHS~G=)2W44qm#sRnMQsEcl~s;l{-&aC4dbX<W!v$~7Z?
zPtYiEbCuO{x?1vHOgD|(io48Gk5}FN=}7Z2iu(OvlMulb;{u~PnqQ~l9!ouu1!okB
z>I&%Khgd)5jaR*TdAhq2PK|rd{OO<dlW&#ZpZl!5|MzY=pt@f9k>7o+bCGrTcP>~F
z%z$fr9N8GQeb!4vjq7w^x97ThIv1^pAUPIcQ>-2MH`<K#+Ge%nF0qu|!nYA@Qsn&P
zC4&Zw<9@~`a<$f|CYN8|O2%UtoouDDoM+<P!1)qO+Ei{u5ENt(MNnkPsTkUUnIv#w
zL@WTO#Wl_YREESv{Tv(NOkl%^m=YRcoCzprA|xhS!?97$lr4xdVoGRKFahOEgv69t
zFs}rb*AwGR35^M+Y&=3$=a{B*j58&4OfY5R5vn@JHJ#&}DWT)KPK2t?2~FpOrgK8q
ziBQ#PYC26#r>W~isOrQMNa^WGP3NSp6QQcp(sWvyPD|H`P}LdNbjCHEaa|`uRVSW>
z%Kfx8owlwMp{jFA(>bN-oYHk7RCP{kI;S<A)4EQCs?Hfr=ZvOvM%Rf@)#+$D9ZjdB
z>qMyPOlUe2n$Co-6QQazsp(8=I+MCigsRS2P3Nqpb5_@hP}P~zbfz?&DP1Q*Rp%Z}
z=N?Vx9$hCwRp(w!=Uz?cUR@_bRVUsgF#6<kXin2Pr|U$h>fER4+^6Z>r|U$h>fFzn
z+3-oYpEGme!*0J|x(`EQdLedRW6o>Ld7X(+WggI&2Q=mZorzFo9@LlzHReH`iBM%8
z(wK)d<{_PlP-PzGOzAR*Ia5C44-2Mza3dt9yn_o`&IK*!f}Rth$Z5hrvx<Qh>LsM+
zW@_LZi9-WLfV3irB9KX8paRD&$za5i?K6;6Kz9rjp_B##6<BGY3X}{~Kz9rjAzC91
zRA9r1a;gR@pgRVN5G~?Z7^uL8QK*qa$v_2EhN?~&sHm1RVW0|>3>2YsMKVx?QYQ>l
zU^x>8szAv=1(fF`14Srx!axO<Ghv_#lnhirIg<<&q0|Wj6<E%MfhtfkPyyvkGEju_
ze!@TnmNQ|X3X}{~Ksl2P6rt1!0~J`#gn=qhGEf2KOfpb}QYQ>lU^x>8szAv=1(Y+%
zKoLrvFi?TzOc<yFB?A>u&LjgxD0RX>1(q{mpbC@>R6seC3>2Z%2?G^a&V+#~P%=;f
z<xDbAgi<FARA4z12C6{GKn0XD$v_cGoiI>=<xCi;0wn_#P|hR+MJRQ`Kn0dFVW0|>
z3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=rz^3{+q_69%e4$v_2^Gs!>^N}VuJf#pmX
zr~)Me6;RG314Srx!axO<Ghv_#lnhirIg<<&q0|Wj6<E%MfhtfkPyyvkGEjt4Ck#|z
zITHq|K*>M_lrzad5lWpfP=V!47^ngz0~JutBm+e#b;3XqDF%v2HBf}Afg)54RAItE
z6($*|!XyJ#m@rU<2?JG_WS|O@3{+vlKouqoRAG{VDoip^g$V;ym@rU<Nd~Gg$v_n*
z3>1;PyD(5hxMRFC$v_d}Hpq~evTtFah-BZwKoQBlB?Cn$`<4t8A(o2fTd+{pwLARB
zYL9-9-X5o~Z1ehepNi72R9e-b^$w$2JDY{$p3Tw0rGsZOti7Dg)A<q|3Unx%soBz5
ztOj%^uUcE1SY(;(S@G0~(pk4Q2|z8An6~2Yjk8I<5_E;#q%vy^$5L>0)0$y)hDOw|
z^s+L6cZ955^02X7LyJKsnq5!qwPxR&W|L948^iOP;Yp0ui_{EX2kKE1(3)&2(eg@l
zc8$)hEnYH1>ro5{x5neSR=rj?Zf=Hcp!8H8X3q^|$KuIX&Yn}U=XmxU+NWmErABAZ
zHMh&8T`Z+xxi8diMIIr&tE6{%dUqhbyGwdEOz#bdx3Hk~mDPJndXJ~~2GV=Gr1!$~
z`N8zDM@XMn(&u^l{6PBrF6r}O`lZ42V~>!2NlCxN(=QFAU)m-8QkcFln11{b(ifEU
z1)jbzkiM`>`a+n#IGBFo5z-fx^hKV&IFP=$OZp<x$LLWunBEcT<--H76`1Z~{Z=na
zjq@pwFPhh3b%WE`O6b+$U1O*^Q8u!=p?R6qtHTS(P<5hgWOYOH3`@W?&!jNCl?+uU
z%0^Z<G;dORb$C@7s!o)RtZrx??9r>k`^!*uqHJV!L*sg{UL9U)hN=@~BdZ%4r*nFB
zc+(lGPL%1@IR_rDXK&Bc%Q<YdU|YqGV$I(<^L?>9QMArKT=B2g@^v{%Elf^$)0A6X
zO&4E%BY5TV57V!`{Q9exUt53qb=EZ8>dJCBTBj_lV0>bKVjDJA_2EghbpDBL+0E<U
zpdicAZZ%&q+)|}(xV7>N1{T0GbXYQ2)OE`q7TJ@8jJoywN*Zu4+el-rxl}2c0i!~U
z`s3%h9yCZaaw_XqOPS1KhMFNZj>b|6x3Tn6q-%9H**k6~lev&8j$`#cJK22f{8KTx
zwLwBj04=`{79&}}{O){b@B&E)tQjo34_#SV?)j<m7|D9HM8;rMs9|LNsinPc-L06r
z$S~bX{#-KB57>HOY~1mZoed*k8-d{mtbJ$2{#nO2Zmpxp57q}$a>0XzxGCMaTZ5&z
zE$bh5Cp&Gck2D_#qpo+44)q+}_h9`7wXw}Ex6!KG&vZ`?!T89)?OV5^!BEHGB6yeA
zX=5=T6FZAk;Tl_~TMljO&Bf8;hU!9lF0YO5=JKR_rrxl3>E_X+WvG61UT|SV-vm}<
zu#}(|2Mf{7BU{&e`&k;(nE&`-dSG0eJsRDZ0p)BX5w}c+)dqSGO-*Cdv=JvUZ1cj!
z)B#MMLN(vYXO6LO#?wTiG3A_z(Ir0d!#S0Cnx(!2>>{I%*x3;jJ61|T)vfTBY6xff
z=y~yQ$sKi9JXDP5i1n%2%H=Bbg{?$6b)ObfH)%)s1~47)LbkK_3v_+8T4ko&sI4$M
zclo)CO<~ffYzkvnbmXqED2@N+Uz->HaI^f|=RTZwp8xX~yY3Y)e8s(D><%BJrtwW?
zYMt0U?s~CZ6WZXMKw{c#K1sY2q=!yUq5_w;olhEc=v}%!t!+Z5PEEo*8!Sjhw)lLm
zOx$W)TftjxE5g=-tFN`!@C%5ocb(2UK$Bu;%3~W;VC)oRQIP1YTalfTTv!s_DRJ@4
zxOQdDav1I4-Pm9(xY|bDH#Q6wY~1i^`u2SBlH!e9zP1DYWxxOYmwarpQ%t>*e$el?
z9*ny3OI+!NS0e1j6pLULiG9lcj$;%qr;nu!-co2R*<vi=>k-D1{r|CqKQ#Q0jHOc;
zOFtetmVAtuUyK|}w{hjp&{(n=)(FK|Ix3z@hujxe@aGI==sd&lK1q+!p5d&_i`NXk
zqs{;5QF7ujLk>;xv)pC{<Gy|0HcXToc%#DSbBx^k_D(#7`NP=1`843y=|_FPPe1DE
z6VWCJGqDN(YjK7BN}W3FF0OnLUU^QvvV|^M2<3LQ+Pdh7Zg|Deu6&Fuyj`fUY217Q
ze_sjP#xtCv0D$LZE5p2GDwvG;$4(4JA^x$${|%FcQHa+>Dp%eQ#h*Ch;z7aR57Xo6
zafAQs<8-WAtk%R0puf~StOR{N;$3sNuDkYK+t`Pv!#B?(ef@YVIUY0MdN@DPN}4e%
zf(Ii-C+P}_aK88Ot~R%yTsr59-vCo*^W{}o>M=s&k1cA8oiS&O-e{du6Wq_7;y4Y8
z=61ZE$%y~Ypi910&payv+<$`)q(zV64;-lQm^?X7Cr!MBFNQ>5Bck9TIm%K<P-(FL
E0+(|YhyVZp
literal 0
HcmV?d00001
diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h
index 7c7f9fbc44..dfb8523c8b 100644
--- a/tests/qtest/bios-tables-test-allowed-diff.h
+++ b/tests/qtest/bios-tables-test-allowed-diff.h
@@ -1,3 +1 @@
/* List of comma-separated changed AML files to ignore */
-"tests/data/acpi/q35/DSDT.cxl",
-"tests/data/acpi/q35/CEDT.cxl",
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 39/45] qtest/cxl: Add more complex test cases with CFMWs
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:41 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
Add CXL Fixed Memory Windows to the CXL tests.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
tests/qtest/cxl-test.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/tests/qtest/cxl-test.c b/tests/qtest/cxl-test.c
index 5f0794e816..079011af6a 100644
--- a/tests/qtest/cxl-test.c
+++ b/tests/qtest/cxl-test.c
@@ -9,11 +9,13 @@
#include "libqtest-single.h"
#define QEMU_PXB_CMD "-machine q35,cxl=on " \
- "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 "
+ "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 " \
+ "-cxl-fixed-memory-window targets.0=cxl.0,size=4G "
-#define QEMU_2PXB_CMD "-machine q35,cxl=on " \
+#define QEMU_2PXB_CMD "-machine q35,cxl=on " \
"-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 " \
- "-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 "
+ "-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 " \
+ "-cxl-fixed-memory-window targets.0=cxl.0,targets.1=cxl.1,size=4G "
#define QEMU_RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 "
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 39/45] qtest/cxl: Add more complex test cases with CFMWs
@ 2022-04-29 14:41 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
From: Ben Widawsky <ben.widawsky@intel.com>
Add CXL Fixed Memory Windows to the CXL tests.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
tests/qtest/cxl-test.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/tests/qtest/cxl-test.c b/tests/qtest/cxl-test.c
index 5f0794e816..079011af6a 100644
--- a/tests/qtest/cxl-test.c
+++ b/tests/qtest/cxl-test.c
@@ -9,11 +9,13 @@
#include "libqtest-single.h"
#define QEMU_PXB_CMD "-machine q35,cxl=on " \
- "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 "
+ "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 " \
+ "-cxl-fixed-memory-window targets.0=cxl.0,size=4G "
-#define QEMU_2PXB_CMD "-machine q35,cxl=on " \
+#define QEMU_2PXB_CMD "-machine q35,cxl=on " \
"-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 " \
- "-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 "
+ "-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 " \
+ "-cxl-fixed-memory-window targets.0=cxl.0,targets.1=cxl.1,size=4G "
#define QEMU_RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 "
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 40/45] hw/arm/virt: Basic CXL enablement on pci_expander_bridge instances pxb-cxl
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:41 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Code based on i386/pc enablement.
The memory layout places space for 16 host bridge register regions after
the GIC_REDIST2 in the extended memmap.
The CFMWs are placed above the extended memmap.
Only create the CEDT table if cxl=on set for the machine.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
---
hw/arm/virt-acpi-build.c | 33 +++++++++++++++++++++++++++++++++
hw/arm/virt.c | 40 +++++++++++++++++++++++++++++++++++++++-
include/hw/arm/virt.h | 1 +
3 files changed, 73 insertions(+), 1 deletion(-)
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 449fab0080..86a2f40437 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -39,9 +39,11 @@
#include "hw/acpi/aml-build.h"
#include "hw/acpi/utils.h"
#include "hw/acpi/pci.h"
+#include "hw/acpi/cxl.h"
#include "hw/acpi/memory_hotplug.h"
#include "hw/acpi/generic_event_device.h"
#include "hw/acpi/tpm.h"
+#include "hw/cxl/cxl.h"
#include "hw/pci/pcie_host.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_bus.h"
@@ -157,10 +159,29 @@ static void acpi_dsdt_add_virtio(Aml *scope,
}
}
+/* Uses local definition of AcpiBuildState so can't easily be common code */
+static void build_acpi0017(Aml *table)
+{
+ Aml *dev, *scope, *method;
+
+ scope = aml_scope("_SB");
+ dev = aml_device("CXLM");
+ aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0017")));
+
+ method = aml_method("_STA", 0, AML_NOTSERIALIZED);
+ aml_append(method, aml_return(aml_int(0x01)));
+ aml_append(dev, method);
+
+ aml_append(scope, dev);
+ aml_append(table, scope);
+}
+
static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
uint32_t irq, VirtMachineState *vms)
{
int ecam_id = VIRT_ECAM_ID(vms->highmem_ecam);
+ bool cxl_present = false;
+ PCIBus *bus = vms->bus;
struct GPEXConfig cfg = {
.mmio32 = memmap[VIRT_PCIE_MMIO],
.pio = memmap[VIRT_PCIE_PIO],
@@ -174,6 +195,14 @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
}
acpi_dsdt_add_gpex(scope, &cfg);
+ QLIST_FOREACH(bus, &vms->bus->child, sibling) {
+ if (pci_bus_is_cxl(bus)) {
+ cxl_present = true;
+ }
+ }
+ if (cxl_present) {
+ build_acpi0017(scope);
+ }
}
static void acpi_dsdt_add_gpio(Aml *scope, const MemMapEntry *gpio_memmap,
@@ -991,6 +1020,10 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
vms->oem_table_id);
}
}
+ if (ms->cxl_devices_state->is_enabled) {
+ cxl_build_cedt(ms, table_offsets, tables_blob, tables->linker,
+ vms->oem_id, vms->oem_table_id);
+ }
if (ms->nvdimms_state->is_enabled) {
nvdimm_build_acpi(table_offsets, tables_blob, tables->linker,
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 955223984c..5927d741a3 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -78,6 +78,7 @@
#include "hw/virtio/virtio-mem-pci.h"
#include "hw/virtio/virtio-iommu.h"
#include "hw/char/pl011.h"
+#include "hw/cxl/cxl.h"
#include "qemu/guest-random.h"
#define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \
@@ -178,6 +179,7 @@ static const MemMapEntry base_memmap[] = {
static MemMapEntry extended_memmap[] = {
/* Additional 64 MB redist region (can contain up to 512 redistributors) */
[VIRT_HIGH_GIC_REDIST2] = { 0x0, 64 * MiB },
+ [VIRT_CXL_HOST] = { 0x0, 64 * KiB * 16 }, /* 16 UID */
[VIRT_HIGH_PCIE_ECAM] = { 0x0, 256 * MiB },
/* Second PCIe window */
[VIRT_HIGH_PCIE_MMIO] = { 0x0, 512 * GiB },
@@ -1525,6 +1527,17 @@ static void create_pcie(VirtMachineState *vms)
}
}
+static void create_cxl_host_reg_region(VirtMachineState *vms)
+{
+ MemoryRegion *sysmem = get_system_memory();
+ MachineState *ms = MACHINE(vms);
+ MemoryRegion *mr = &ms->cxl_devices_state->host_mr;
+
+ memory_region_init(mr, OBJECT(ms), "cxl_host_reg",
+ vms->memmap[VIRT_CXL_HOST].size);
+ memory_region_add_subregion(sysmem, vms->memmap[VIRT_CXL_HOST].base, mr);
+}
+
static void create_platform_bus(VirtMachineState *vms)
{
DeviceState *dev;
@@ -1687,7 +1700,7 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx)
static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
{
MachineState *ms = MACHINE(vms);
- hwaddr base, device_memory_base, device_memory_size, memtop;
+ hwaddr base, device_memory_base, device_memory_size, memtop, cxl_fmw_base;
int i;
vms->memmap = extended_memmap;
@@ -1779,6 +1792,20 @@ static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
memory_region_init(&ms->device_memory->mr, OBJECT(vms),
"device-memory", device_memory_size);
}
+
+ if (ms->cxl_devices_state->fixed_windows) {
+ GList *it;
+
+ cxl_fmw_base = ROUND_UP(base, 256 * MiB);
+ for (it = ms->cxl_devices_state->fixed_windows; it; it = it->next) {
+ CXLFixedWindow *fw = it->data;
+
+ fw->base = cxl_fmw_base;
+ memory_region_init_io(&fw->mr, OBJECT(vms), &cfmws_ops, fw,
+ "cxl-fixed-memory-region", fw->size);
+ cxl_fmw_base += fw->size;
+ }
+ }
}
/*
@@ -2215,6 +2242,15 @@ static void machvirt_init(MachineState *machine)
memory_region_add_subregion(sysmem, machine->device_memory->base,
&machine->device_memory->mr);
}
+ if (machine->cxl_devices_state->fixed_windows) {
+ GList *it;
+ for (it = machine->cxl_devices_state->fixed_windows; it;
+ it = it->next) {
+ CXLFixedWindow *fw = it->data;
+
+ memory_region_add_subregion(sysmem, fw->base, &fw->mr);
+ }
+ }
virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
@@ -2241,6 +2277,7 @@ static void machvirt_init(MachineState *machine)
create_rtc(vms);
create_pcie(vms);
+ create_cxl_host_reg_region(vms);
if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) {
vms->acpi_dev = create_acpi_ged(vms);
@@ -2909,6 +2946,7 @@ static void virt_machine_class_init(ObjectClass *oc, void *data)
hc->unplug = virt_machine_device_unplug_cb;
mc->nvdimm_supported = true;
mc->smp_props.clusters_supported = true;
+ mc->cxl_supported = true;
mc->auto_enable_numa_with_memhp = true;
mc->auto_enable_numa_with_memdev = true;
mc->default_ram_id = "mach-virt.ram";
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index 15feabac63..67c08a62af 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -92,6 +92,7 @@ enum {
/* indices of IO regions located after the RAM */
enum {
VIRT_HIGH_GIC_REDIST2 = VIRT_LOWMEMMAP_LAST,
+ VIRT_CXL_HOST,
VIRT_HIGH_PCIE_ECAM,
VIRT_HIGH_PCIE_MMIO,
};
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 40/45] hw/arm/virt: Basic CXL enablement on pci_expander_bridge instances pxb-cxl
@ 2022-04-29 14:41 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Code based on i386/pc enablement.
The memory layout places space for 16 host bridge register regions after
the GIC_REDIST2 in the extended memmap.
The CFMWs are placed above the extended memmap.
Only create the CEDT table if cxl=on set for the machine.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
---
hw/arm/virt-acpi-build.c | 33 +++++++++++++++++++++++++++++++++
hw/arm/virt.c | 40 +++++++++++++++++++++++++++++++++++++++-
include/hw/arm/virt.h | 1 +
3 files changed, 73 insertions(+), 1 deletion(-)
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 449fab0080..86a2f40437 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -39,9 +39,11 @@
#include "hw/acpi/aml-build.h"
#include "hw/acpi/utils.h"
#include "hw/acpi/pci.h"
+#include "hw/acpi/cxl.h"
#include "hw/acpi/memory_hotplug.h"
#include "hw/acpi/generic_event_device.h"
#include "hw/acpi/tpm.h"
+#include "hw/cxl/cxl.h"
#include "hw/pci/pcie_host.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_bus.h"
@@ -157,10 +159,29 @@ static void acpi_dsdt_add_virtio(Aml *scope,
}
}
+/* Uses local definition of AcpiBuildState so can't easily be common code */
+static void build_acpi0017(Aml *table)
+{
+ Aml *dev, *scope, *method;
+
+ scope = aml_scope("_SB");
+ dev = aml_device("CXLM");
+ aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0017")));
+
+ method = aml_method("_STA", 0, AML_NOTSERIALIZED);
+ aml_append(method, aml_return(aml_int(0x01)));
+ aml_append(dev, method);
+
+ aml_append(scope, dev);
+ aml_append(table, scope);
+}
+
static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
uint32_t irq, VirtMachineState *vms)
{
int ecam_id = VIRT_ECAM_ID(vms->highmem_ecam);
+ bool cxl_present = false;
+ PCIBus *bus = vms->bus;
struct GPEXConfig cfg = {
.mmio32 = memmap[VIRT_PCIE_MMIO],
.pio = memmap[VIRT_PCIE_PIO],
@@ -174,6 +195,14 @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
}
acpi_dsdt_add_gpex(scope, &cfg);
+ QLIST_FOREACH(bus, &vms->bus->child, sibling) {
+ if (pci_bus_is_cxl(bus)) {
+ cxl_present = true;
+ }
+ }
+ if (cxl_present) {
+ build_acpi0017(scope);
+ }
}
static void acpi_dsdt_add_gpio(Aml *scope, const MemMapEntry *gpio_memmap,
@@ -991,6 +1020,10 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
vms->oem_table_id);
}
}
+ if (ms->cxl_devices_state->is_enabled) {
+ cxl_build_cedt(ms, table_offsets, tables_blob, tables->linker,
+ vms->oem_id, vms->oem_table_id);
+ }
if (ms->nvdimms_state->is_enabled) {
nvdimm_build_acpi(table_offsets, tables_blob, tables->linker,
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 955223984c..5927d741a3 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -78,6 +78,7 @@
#include "hw/virtio/virtio-mem-pci.h"
#include "hw/virtio/virtio-iommu.h"
#include "hw/char/pl011.h"
+#include "hw/cxl/cxl.h"
#include "qemu/guest-random.h"
#define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \
@@ -178,6 +179,7 @@ static const MemMapEntry base_memmap[] = {
static MemMapEntry extended_memmap[] = {
/* Additional 64 MB redist region (can contain up to 512 redistributors) */
[VIRT_HIGH_GIC_REDIST2] = { 0x0, 64 * MiB },
+ [VIRT_CXL_HOST] = { 0x0, 64 * KiB * 16 }, /* 16 UID */
[VIRT_HIGH_PCIE_ECAM] = { 0x0, 256 * MiB },
/* Second PCIe window */
[VIRT_HIGH_PCIE_MMIO] = { 0x0, 512 * GiB },
@@ -1525,6 +1527,17 @@ static void create_pcie(VirtMachineState *vms)
}
}
+static void create_cxl_host_reg_region(VirtMachineState *vms)
+{
+ MemoryRegion *sysmem = get_system_memory();
+ MachineState *ms = MACHINE(vms);
+ MemoryRegion *mr = &ms->cxl_devices_state->host_mr;
+
+ memory_region_init(mr, OBJECT(ms), "cxl_host_reg",
+ vms->memmap[VIRT_CXL_HOST].size);
+ memory_region_add_subregion(sysmem, vms->memmap[VIRT_CXL_HOST].base, mr);
+}
+
static void create_platform_bus(VirtMachineState *vms)
{
DeviceState *dev;
@@ -1687,7 +1700,7 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx)
static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
{
MachineState *ms = MACHINE(vms);
- hwaddr base, device_memory_base, device_memory_size, memtop;
+ hwaddr base, device_memory_base, device_memory_size, memtop, cxl_fmw_base;
int i;
vms->memmap = extended_memmap;
@@ -1779,6 +1792,20 @@ static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
memory_region_init(&ms->device_memory->mr, OBJECT(vms),
"device-memory", device_memory_size);
}
+
+ if (ms->cxl_devices_state->fixed_windows) {
+ GList *it;
+
+ cxl_fmw_base = ROUND_UP(base, 256 * MiB);
+ for (it = ms->cxl_devices_state->fixed_windows; it; it = it->next) {
+ CXLFixedWindow *fw = it->data;
+
+ fw->base = cxl_fmw_base;
+ memory_region_init_io(&fw->mr, OBJECT(vms), &cfmws_ops, fw,
+ "cxl-fixed-memory-region", fw->size);
+ cxl_fmw_base += fw->size;
+ }
+ }
}
/*
@@ -2215,6 +2242,15 @@ static void machvirt_init(MachineState *machine)
memory_region_add_subregion(sysmem, machine->device_memory->base,
&machine->device_memory->mr);
}
+ if (machine->cxl_devices_state->fixed_windows) {
+ GList *it;
+ for (it = machine->cxl_devices_state->fixed_windows; it;
+ it = it->next) {
+ CXLFixedWindow *fw = it->data;
+
+ memory_region_add_subregion(sysmem, fw->base, &fw->mr);
+ }
+ }
virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
@@ -2241,6 +2277,7 @@ static void machvirt_init(MachineState *machine)
create_rtc(vms);
create_pcie(vms);
+ create_cxl_host_reg_region(vms);
if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) {
vms->acpi_dev = create_acpi_ged(vms);
@@ -2909,6 +2946,7 @@ static void virt_machine_class_init(ObjectClass *oc, void *data)
hc->unplug = virt_machine_device_unplug_cb;
mc->nvdimm_supported = true;
mc->smp_props.clusters_supported = true;
+ mc->cxl_supported = true;
mc->auto_enable_numa_with_memhp = true;
mc->auto_enable_numa_with_memdev = true;
mc->default_ram_id = "mach-virt.ram";
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index 15feabac63..67c08a62af 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -92,6 +92,7 @@ enum {
/* indices of IO regions located after the RAM */
enum {
VIRT_HIGH_GIC_REDIST2 = VIRT_LOWMEMMAP_LAST,
+ VIRT_CXL_HOST,
VIRT_HIGH_PCIE_ECAM,
VIRT_HIGH_PCIE_MMIO,
};
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 41/45] qtest/cxl: Add aarch64 virt test for CXL
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:41 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Add a single complex case for aarch64 virt machine.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
tests/qtest/cxl-test.c | 48 +++++++++++++++++++++++++++++++++--------
tests/qtest/meson.build | 1 +
2 files changed, 40 insertions(+), 9 deletions(-)
diff --git a/tests/qtest/cxl-test.c b/tests/qtest/cxl-test.c
index 079011af6a..ac7d71fd74 100644
--- a/tests/qtest/cxl-test.c
+++ b/tests/qtest/cxl-test.c
@@ -17,6 +17,11 @@
"-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 " \
"-cxl-fixed-memory-window targets.0=cxl.0,targets.1=cxl.1,size=4G "
+#define QEMU_VIRT_2PXB_CMD "-machine virt,cxl=on " \
+ "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 " \
+ "-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 " \
+ "-cxl-fixed-memory-window targets.0=cxl.0,targets.1=cxl.1,size=4G "
+
#define QEMU_RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 "
/* Dual ports on first pxb */
@@ -134,18 +139,43 @@ static void cxl_2pxb_4rp_4t3d(void)
qtest_end();
}
+static void cxl_virt_2pxb_4rp_4t3d(void)
+{
+ g_autoptr(GString) cmdline = g_string_new(NULL);
+ char template[] = "/tmp/cxl-test-XXXXXX";
+ const char *tmpfs;
+
+ tmpfs = mkdtemp(template);
+
+ g_string_printf(cmdline, QEMU_VIRT_2PXB_CMD QEMU_4RP QEMU_4T3D,
+ tmpfs, tmpfs, tmpfs, tmpfs, tmpfs, tmpfs,
+ tmpfs, tmpfs);
+
+ qtest_start(cmdline->str);
+ qtest_end();
+}
+
int main(int argc, char **argv)
{
+ const char *arch = qtest_get_arch();
+
g_test_init(&argc, &argv, NULL);
- qtest_add_func("/pci/cxl/basic_hostbridge", cxl_basic_hb);
- qtest_add_func("/pci/cxl/basic_pxb", cxl_basic_pxb);
- qtest_add_func("/pci/cxl/pxb_with_window", cxl_pxb_with_window);
- qtest_add_func("/pci/cxl/pxb_x2_with_window", cxl_2pxb_with_window);
- qtest_add_func("/pci/cxl/rp", cxl_root_port);
- qtest_add_func("/pci/cxl/rp_x2", cxl_2root_port);
- qtest_add_func("/pci/cxl/type3_device", cxl_t3d);
- qtest_add_func("/pci/cxl/rp_x2_type3_x2", cxl_1pxb_2rp_2t3d);
- qtest_add_func("/pci/cxl/pxb_x2_root_port_x4_type3_x4", cxl_2pxb_4rp_4t3d);
+ if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
+ qtest_add_func("/pci/cxl/basic_hostbridge", cxl_basic_hb);
+ qtest_add_func("/pci/cxl/basic_pxb", cxl_basic_pxb);
+ qtest_add_func("/pci/cxl/pxb_with_window", cxl_pxb_with_window);
+ qtest_add_func("/pci/cxl/pxb_x2_with_window", cxl_2pxb_with_window);
+ qtest_add_func("/pci/cxl/rp", cxl_root_port);
+ qtest_add_func("/pci/cxl/rp_x2", cxl_2root_port);
+ qtest_add_func("/pci/cxl/type3_device", cxl_t3d);
+ qtest_add_func("/pci/cxl/rp_x2_type3_x2", cxl_1pxb_2rp_2t3d);
+ qtest_add_func("/pci/cxl/pxb_x2_root_port_x4_type3_x4",
+ cxl_2pxb_4rp_4t3d);
+ } else if (strcmp(arch, "aarch64") == 0) {
+ qtest_add_func("/pci/cxl/virt/pxb_x2_root_port_x4_type3_x4",
+ cxl_virt_2pxb_4rp_4t3d);
+ }
+
return g_test_run();
}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index dedb477890..aa78d2d537 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -215,6 +215,7 @@ qtests_aarch64 = \
(config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-test'] : []) + \
(config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \
(config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \
+ qtests_cxl + \
['arm-cpu-features',
'numa-test',
'boot-serial-test',
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 41/45] qtest/cxl: Add aarch64 virt test for CXL
@ 2022-04-29 14:41 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Add a single complex case for aarch64 virt machine.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
tests/qtest/cxl-test.c | 48 +++++++++++++++++++++++++++++++++--------
tests/qtest/meson.build | 1 +
2 files changed, 40 insertions(+), 9 deletions(-)
diff --git a/tests/qtest/cxl-test.c b/tests/qtest/cxl-test.c
index 079011af6a..ac7d71fd74 100644
--- a/tests/qtest/cxl-test.c
+++ b/tests/qtest/cxl-test.c
@@ -17,6 +17,11 @@
"-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 " \
"-cxl-fixed-memory-window targets.0=cxl.0,targets.1=cxl.1,size=4G "
+#define QEMU_VIRT_2PXB_CMD "-machine virt,cxl=on " \
+ "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 " \
+ "-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 " \
+ "-cxl-fixed-memory-window targets.0=cxl.0,targets.1=cxl.1,size=4G "
+
#define QEMU_RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 "
/* Dual ports on first pxb */
@@ -134,18 +139,43 @@ static void cxl_2pxb_4rp_4t3d(void)
qtest_end();
}
+static void cxl_virt_2pxb_4rp_4t3d(void)
+{
+ g_autoptr(GString) cmdline = g_string_new(NULL);
+ char template[] = "/tmp/cxl-test-XXXXXX";
+ const char *tmpfs;
+
+ tmpfs = mkdtemp(template);
+
+ g_string_printf(cmdline, QEMU_VIRT_2PXB_CMD QEMU_4RP QEMU_4T3D,
+ tmpfs, tmpfs, tmpfs, tmpfs, tmpfs, tmpfs,
+ tmpfs, tmpfs);
+
+ qtest_start(cmdline->str);
+ qtest_end();
+}
+
int main(int argc, char **argv)
{
+ const char *arch = qtest_get_arch();
+
g_test_init(&argc, &argv, NULL);
- qtest_add_func("/pci/cxl/basic_hostbridge", cxl_basic_hb);
- qtest_add_func("/pci/cxl/basic_pxb", cxl_basic_pxb);
- qtest_add_func("/pci/cxl/pxb_with_window", cxl_pxb_with_window);
- qtest_add_func("/pci/cxl/pxb_x2_with_window", cxl_2pxb_with_window);
- qtest_add_func("/pci/cxl/rp", cxl_root_port);
- qtest_add_func("/pci/cxl/rp_x2", cxl_2root_port);
- qtest_add_func("/pci/cxl/type3_device", cxl_t3d);
- qtest_add_func("/pci/cxl/rp_x2_type3_x2", cxl_1pxb_2rp_2t3d);
- qtest_add_func("/pci/cxl/pxb_x2_root_port_x4_type3_x4", cxl_2pxb_4rp_4t3d);
+ if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
+ qtest_add_func("/pci/cxl/basic_hostbridge", cxl_basic_hb);
+ qtest_add_func("/pci/cxl/basic_pxb", cxl_basic_pxb);
+ qtest_add_func("/pci/cxl/pxb_with_window", cxl_pxb_with_window);
+ qtest_add_func("/pci/cxl/pxb_x2_with_window", cxl_2pxb_with_window);
+ qtest_add_func("/pci/cxl/rp", cxl_root_port);
+ qtest_add_func("/pci/cxl/rp_x2", cxl_2root_port);
+ qtest_add_func("/pci/cxl/type3_device", cxl_t3d);
+ qtest_add_func("/pci/cxl/rp_x2_type3_x2", cxl_1pxb_2rp_2t3d);
+ qtest_add_func("/pci/cxl/pxb_x2_root_port_x4_type3_x4",
+ cxl_2pxb_4rp_4t3d);
+ } else if (strcmp(arch, "aarch64") == 0) {
+ qtest_add_func("/pci/cxl/virt/pxb_x2_root_port_x4_type3_x4",
+ cxl_virt_2pxb_4rp_4t3d);
+ }
+
return g_test_run();
}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index dedb477890..aa78d2d537 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -215,6 +215,7 @@ qtests_aarch64 = \
(config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-test'] : []) + \
(config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \
(config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \
+ qtests_cxl + \
['arm-cpu-features',
'numa-test',
'boot-serial-test',
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 42/45] docs/cxl: Add initial Compute eXpress Link (CXL) documentation.
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:41 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Provide an introduction to the main components of a CXL system,
with detailed explanation of memory interleaving, example command
lines and kernel configuration.
This was a challenging document to write due to the need to extract
only that subset of CXL information which is relevant to either
users of QEMU emulation of CXL or to those interested in the
implementation. Much of CXL is concerned with specific elements of
the protocol, management of memory pooling etc which is simply
not relevant to what is currently planned for CXL emulation
in QEMU. All comments welcome
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
docs/system/device-emulation.rst | 1 +
docs/system/devices/cxl.rst | 302 +++++++++++++++++++++++++++++++
2 files changed, 303 insertions(+)
diff --git a/docs/system/device-emulation.rst b/docs/system/device-emulation.rst
index ae8dd233e8..3b729b920d 100644
--- a/docs/system/device-emulation.rst
+++ b/docs/system/device-emulation.rst
@@ -84,6 +84,7 @@ Emulated Devices
devices/can.rst
devices/ccid.rst
+ devices/cxl.rst
devices/ivshmem.rst
devices/net.rst
devices/nvme.rst
diff --git a/docs/system/devices/cxl.rst b/docs/system/devices/cxl.rst
new file mode 100644
index 0000000000..9293cbf01a
--- /dev/null
+++ b/docs/system/devices/cxl.rst
@@ -0,0 +1,302 @@
+Compute Express Link (CXL)
+==========================
+From the view of a single host, CXL is an interconnect standard that
+targets accelerators and memory devices attached to a CXL host.
+This description will focus on those aspects visible either to
+software running on a QEMU emulated host or to the internals of
+functional emulation. As such, it will skip over many of the
+electrical and protocol elements that would be more of interest
+for real hardware and will dominate more general introductions to CXL.
+It will also completely ignore the fabric management aspects of CXL
+by considering only a single host and a static configuration.
+
+CXL shares many concepts and much of the infrastructure of PCI Express,
+with CXL Host Bridges, which have CXL Root Ports which may be directly
+attached to CXL or PCI End Points. Alternatively there may be CXL Switches
+with CXL and PCI Endpoints attached below them. In many cases additional
+control and capabilities are exposed via PCI Express interfaces.
+This sharing of interfaces and hence emulation code is is reflected
+in how the devices are emulated in QEMU. In most cases the various
+CXL elements are built upon an equivalent PCIe devices.
+
+CXL devices support the following interfaces:
+
+* Most conventional PCIe interfaces
+
+ - Configuration space access
+ - BAR mapped memory accesses used for registers and mailboxes.
+ - MSI/MSI-X
+ - AER
+ - DOE mailboxes
+ - IDE
+ - Many other PCI express defined interfaces..
+
+* Memory operations
+
+ - Equivalent of accessing DRAM / NVDIMMs. Any access / feature
+ supported by the host for normal memory should also work for
+ CXL attached memory devices.
+
+* Cache operations. The are mostly irrelevant to QEMU emulation as
+ QEMU is not emulating a coherency protocol. Any emulation related
+ to these will be device specific and is out of the scope of this
+ document.
+
+CXL 2.0 Device Types
+--------------------
+CXL 2.0 End Points are often categorized into three types.
+
+**Type 1:** These support coherent caching of host memory. Example might
+be a crypto accelerators. May also have device private memory accessible
+via means such as PCI memory reads and writes to BARs.
+
+**Type 2:** These support coherent caching of host memory and host
+managed device memory (HDM) for which the coherency protocol is managed
+by the host. This is a complex topic, so for more information on CXL
+coherency see the CXL 2.0 specification.
+
+**Type 3 Memory devices:** These devices act as a means of attaching
+additional memory (HDM) to a CXL host including both volatile and
+persistent memory. The CXL topology may support interleaving across a
+number of Type 3 memory devices using HDM Decoders in the host, host
+bridge, switch upstream port and endpoints.
+
+Scope of CXL emulation in QEMU
+------------------------------
+The focus of CXL emulation is CXL revision 2.0 and later. Earlier CXL
+revisions defined a smaller set of features, leaving much of the control
+interface as implementation defined or device specific, making generic
+emulation challenging with host specific firmware being responsible
+for setup and the Endpoints being presented to operating systems
+as Root Complex Integrated End Points. CXL rev 2.0 looks a lot
+more like PCI Express, with fully specified discoverability
+of the CXL topology.
+
+CXL System components
+----------------------
+A CXL system is made up a Host with a number of 'standard components'
+the control and capabilities of which are discoverable by system software
+using means described in the CXL 2.0 specification.
+
+CXL Fixed Memory Windows (CFMW)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+A CFMW consists of a particular range of Host Physical Address space
+which is routed to particular CXL Host Bridges. At time of generic
+software initialization it will have a particularly interleaving
+configuration and associated Quality of Serice Throtling Group (QTG).
+This information is available to system software, when making
+decisions about how to configure interleave across available CXL
+memory devices. It is provide as CFMW Structures (CFMWS) in
+the CXL Early Discovery Table, an ACPI table.
+
+Note: QTG 0 is the only one currently supported in QEMU.
+
+CXL Host Bridge (CXL HB)
+~~~~~~~~~~~~~~~~~~~~~~~~
+A CXL host bridge is similar to the PCIe equivalent, but with a
+specification defined register interface called CXL Host Bridge
+Component Registers (CHBCR). The location of this CHBCR MMIO
+space is described to system software via a CXL Host Bridge
+Structure (CHBS) in the CEDT ACPI table. The actual interfaces
+are identical to those used for other parts of the CXL heirarchy
+as CXL Component Registers in PCI BARs.
+
+Interfaces provided include:
+
+* Configuration of HDM Decoders to route CXL Memory accesses with
+ a particularly Host Physical Address range to the target port
+ below which the CXL device servicing that address lies. This
+ may be a mapping to a single Root Port (RP) or across a set of
+ target RPs.
+
+CXL Root Ports (CXL RP)
+~~~~~~~~~~~~~~~~~~~~~~~
+A CXL Root Port servers te same purpose as a PCIe Root Port.
+There are a number of CXL specific Designated Vendor Specific
+Extended Capabilities (DVSEC) in PCIe Configuration Space
+and associated component register access via PCI bars.
+
+CXL Switch
+~~~~~~~~~~
+Not yet implemented in QEMU.
+
+Here we consider a simple CXL switch with only a single
+virtual hierarchy. Whilst more complex devices exist, their
+visibility to a particular host is generally the same as for
+a simple switch design. Hosts often have no awareness
+of complex rerouting and device pooling, they simply see
+devices being hot added or hot removed.
+
+A CXL switch has a similar architecture to those in PCIe,
+with a single upstream port, internal PCI bus and multiple
+downstream ports.
+
+Both the CXL upstream and downstream ports have CXL specific
+DVSECs in configuration space, and component registers in PCI
+BARs. The Upstream Port has the configuration interfaces for
+the HDM decoders which route incoming memory accesses to the
+appropriate downstream port.
+
+CXL Memory Devices - Type 3
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+CXL type 3 devices use a PCI class code and are intended to be supported
+by a generic operating system driver. They have HDM decoders
+though in these EP devices, the decoder is reponsible not for
+routing but for translation of the incoming host physical address (HPA)
+into a Device Physical Address (DPA).
+
+CXL Memory Interleave
+---------------------
+To understand the interaction of different CXL hardware components which
+are emulated in QEMU, let us consider a memory read in a fully configured
+CXL topology. Note that system software is responsible for configuration
+of all components with the exception of the CFMWs. System software is
+responsible for allocating appropriate ranges from within the CFMWs
+and exposing those via normal memory configurations as would be done
+for system RAM.
+
+Example system Topology. x marks the match in each decoder level::
+
+ |<------------------SYSTEM PHYSICAL ADDRESS MAP (1)----------------->|
+ | __________ __________________________________ __________ |
+ | | | | | | | |
+ | | CFMW 0 | | CXL Fixed Memory Window 1 | | CFMW 1 | |
+ | | HB0 only | | Configured to interleave memory | | HB1 only | |
+ | | | | memory accesses across HB0/HB1 | | | |
+ | |__________| |_____x____________________________| |__________| |
+ | | | |
+ | | | |
+ | | | |
+ | Interleave Decoder | |
+ | Matches this HB | |
+ \_____________| |_____________/
+ __________|__________ _____|_______________
+ | | | |
+ (2) | CXL HB 0 | | CXL HB 1 |
+ | HB IntLv Decoders | | HB IntLv Decoders |
+ | PCI/CXL Root Bus 0c | | PCI/CXL Root Bus 0d |
+ | | | |
+ |___x_________________| |_____________________|
+ | | | |
+ | | | |
+ A HB 0 HDM Decoder | | |
+ matches this Port | | |
+ | | | |
+ ___________|___ __________|__ __|_________ ___|_________
+ (3)| Root Port 0 | | Root Port 1 | | Root Port 2| | Root Port 3 |
+ | Appears in | | Appears in | | Appears in | | Appear in |
+ | PCI topology | | PCI Topology| | PCI Topo | | PCI Topo |
+ | As 0c:00.0 | | as 0c:01.0 | | as de:00.0 | | as de:01.0 |
+ |_______________| |_____________| |____________| |_____________|
+ | | | |
+ | | | |
+ _____|_________ ______|______ ______|_____ ______|_______
+ (4)| x | | | | | | |
+ | CXL Type3 0 | | CXL Type3 1 | | CXL type3 2| | CLX Type 3 3 |
+ | | | | | | | |
+ | PMEM0(Vol LSA)| | PMEM1 (...) | | PMEM2 (...)| | PMEM3 (...) |
+ | Decoder to go | | | | | | |
+ | from host PA | | PCI 0e:00.0 | | PCI df:00.0| | PCI e0:00.0 |
+ | to device PA | | | | | | |
+ | PCI as 0d:00.0| | | | | | |
+ |_______________| |_____________| |____________| |______________|
+
+Notes:
+
+(1) **3 CXL Fixed Memory Windows (CFMW)** corresponding to different
+ ranges of the system physical address map. Each CFMW has
+ particular interleave setup across the CXL Host Bridges (HB)
+ CFMW0 provides uninterleaved access to HB0, CFW2 provides
+ uninterleaved acess to HB1. CFW1 provides interleaved memory access
+ across HB0 and HB1.
+
+(2) **Two CXL Host Bridges**. Each of these has 2 CXL Root Ports and
+ programmable HDM decoders to route memory accesses either to
+ a single port or interleave them across multiple ports.
+ A complex configuration here, might be to use the following HDM
+ decoders in HB0. HDM0 routes CFMW0 requests to RP0 and hence
+ part of CXL Type3 0. HDM1 routes CFMW0 requests from a
+ different region of the CFMW0 PA range to RP2 and hence part
+ of CXL Type 3 1. HDM2 routes yet another PA range from within
+ CFMW0 to be interleaved across RP0 and RP1, providing 2 way
+ interleave of part of the memory provided by CXL Type3 0 and
+ CXL Type 3 1. HDM3 routes those interleaved accesses from
+ CFMW1 that target HB0 to RP 0 and another part of the memory of
+ CXL Type 3 0 (as part of a 2 way interleave at the system level
+ across for example CXL Type3 0 and CXL Type3 2.
+ HDM4 is used to enable system wide 4 way interleave across all
+ the present CXL type3 devices, by interleaving those (interleaved)
+ requests that HB0 receives from from CFMW1 across RP 0 and
+ RP 1 and hence to yet more regions of the memory of the
+ attached Type3 devices. Note this is a representative subset
+ of the full range of possible HDM decoder configurations in this
+ topology.
+
+(3) **Four CXL Root Ports.** In this case the CXL Type 3 devices are
+ directly attached to these ports.
+
+(4) **Four CXL Type3 memory expansion devices.** These will each have
+ HDM decoders, but in this case rather than performing interleave
+ they will take the Host Physical Addresses of accesses and map
+ them to their own local Device Physical Address Space (DPA).
+
+Example command lines
+---------------------
+A very simple setup with just one directly attached CXL Type 3 device::
+
+ qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+ ...
+ -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa.raw,size=256M \
+ -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+ -device cxl-rp,port=0,bus=cxl.1,id=root_port13,chassis=0,slot=2 \
+ -device cxl-type3,bus=root_port13,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem0 \
+ -cxl-fixed-memory-window targets.0=cxl.1,size=4G
+
+A setup suitable for 4 way interleave. Only one fixed window provided, to enable 2 way
+interleave across 2 CXL host bridges. Each host bridge has 2 CXL Root Ports, with
+the CXL Type3 device directly attached (no switches).::
+
+ qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+ ...
+ -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest.raw,size=256M \
+ -object memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M \
+ -object memory-backend-file,id=cxl-mem3,share=on,mem-path=/tmp/cxltest3.raw,size=256M \
+ -object memory-backend-file,id=cxl-mem4,share=on,mem-path=/tmp/cxltest4.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa2,share=on,mem-path=/tmp/lsa2.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa3,share=on,mem-path=/tmp/lsa3.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa4,share=on,mem-path=/tmp/lsa4.raw,size=256M \
+ -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+ -device pxb-cxl,bus_nr=222,bus=pcie.0,id=cxl.2 \
+ -device cxl-rp,port=0,bus=cxl.1,id=root_port13,chassis=0,slot=2 \
+ -device cxl-type3,bus=root_port13,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem0 \
+ -device cxl-rp,port=1,bus=cxl.1,id=root_port14,chassis=0,slot=3 \
+ -device cxl-type3,bus=root_port14,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem1 \
+ -device cxl-rp,port=0,bus=cxl.2,id=root_port15,chassis=0,slot=5 \
+ -device cxl-type3,bus=root_port15,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem2 \
+ -device cxl-rp,port=1,bus=cxl.2,id=root_port16,chassis=0,slot=6 \
+ -device cxl-type3,bus=root_port16,memdev=cxl-mem4,lsa=cxl-lsa4,id=cxl-pmem3 \
+ -cxl-fixed-memory-window targets.0=cxl.1,targets.1=cxl.2,size=4G,interleave-granularity=8k
+
+Kernel Configuration Options
+----------------------------
+
+In Linux 5.18 the followings options are necessary to make use of
+OS management of CXL memory devices as described here.
+
+* CONFIG_CXL_BUS
+* CONFIG_CXL_PCI
+* CONFIG_CXL_ACPI
+* CONFIG_CXL_PMEM
+* CONFIG_CXL_MEM
+* CONFIG_CXL_PORT
+* CONFIG_CXL_REGION
+
+References
+----------
+
+ - Consortium website for specifications etc:
+ http://www.computeexpresslink.org
+ - Compute Express link Revision 2 specification, October 2020
+ - CEDT CFMWS & QTG _DSM ECN May 2021
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 42/45] docs/cxl: Add initial Compute eXpress Link (CXL) documentation.
@ 2022-04-29 14:41 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Provide an introduction to the main components of a CXL system,
with detailed explanation of memory interleaving, example command
lines and kernel configuration.
This was a challenging document to write due to the need to extract
only that subset of CXL information which is relevant to either
users of QEMU emulation of CXL or to those interested in the
implementation. Much of CXL is concerned with specific elements of
the protocol, management of memory pooling etc which is simply
not relevant to what is currently planned for CXL emulation
in QEMU. All comments welcome
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
docs/system/device-emulation.rst | 1 +
docs/system/devices/cxl.rst | 302 +++++++++++++++++++++++++++++++
2 files changed, 303 insertions(+)
diff --git a/docs/system/device-emulation.rst b/docs/system/device-emulation.rst
index ae8dd233e8..3b729b920d 100644
--- a/docs/system/device-emulation.rst
+++ b/docs/system/device-emulation.rst
@@ -84,6 +84,7 @@ Emulated Devices
devices/can.rst
devices/ccid.rst
+ devices/cxl.rst
devices/ivshmem.rst
devices/net.rst
devices/nvme.rst
diff --git a/docs/system/devices/cxl.rst b/docs/system/devices/cxl.rst
new file mode 100644
index 0000000000..9293cbf01a
--- /dev/null
+++ b/docs/system/devices/cxl.rst
@@ -0,0 +1,302 @@
+Compute Express Link (CXL)
+==========================
+From the view of a single host, CXL is an interconnect standard that
+targets accelerators and memory devices attached to a CXL host.
+This description will focus on those aspects visible either to
+software running on a QEMU emulated host or to the internals of
+functional emulation. As such, it will skip over many of the
+electrical and protocol elements that would be more of interest
+for real hardware and will dominate more general introductions to CXL.
+It will also completely ignore the fabric management aspects of CXL
+by considering only a single host and a static configuration.
+
+CXL shares many concepts and much of the infrastructure of PCI Express,
+with CXL Host Bridges, which have CXL Root Ports which may be directly
+attached to CXL or PCI End Points. Alternatively there may be CXL Switches
+with CXL and PCI Endpoints attached below them. In many cases additional
+control and capabilities are exposed via PCI Express interfaces.
+This sharing of interfaces and hence emulation code is is reflected
+in how the devices are emulated in QEMU. In most cases the various
+CXL elements are built upon an equivalent PCIe devices.
+
+CXL devices support the following interfaces:
+
+* Most conventional PCIe interfaces
+
+ - Configuration space access
+ - BAR mapped memory accesses used for registers and mailboxes.
+ - MSI/MSI-X
+ - AER
+ - DOE mailboxes
+ - IDE
+ - Many other PCI express defined interfaces..
+
+* Memory operations
+
+ - Equivalent of accessing DRAM / NVDIMMs. Any access / feature
+ supported by the host for normal memory should also work for
+ CXL attached memory devices.
+
+* Cache operations. The are mostly irrelevant to QEMU emulation as
+ QEMU is not emulating a coherency protocol. Any emulation related
+ to these will be device specific and is out of the scope of this
+ document.
+
+CXL 2.0 Device Types
+--------------------
+CXL 2.0 End Points are often categorized into three types.
+
+**Type 1:** These support coherent caching of host memory. Example might
+be a crypto accelerators. May also have device private memory accessible
+via means such as PCI memory reads and writes to BARs.
+
+**Type 2:** These support coherent caching of host memory and host
+managed device memory (HDM) for which the coherency protocol is managed
+by the host. This is a complex topic, so for more information on CXL
+coherency see the CXL 2.0 specification.
+
+**Type 3 Memory devices:** These devices act as a means of attaching
+additional memory (HDM) to a CXL host including both volatile and
+persistent memory. The CXL topology may support interleaving across a
+number of Type 3 memory devices using HDM Decoders in the host, host
+bridge, switch upstream port and endpoints.
+
+Scope of CXL emulation in QEMU
+------------------------------
+The focus of CXL emulation is CXL revision 2.0 and later. Earlier CXL
+revisions defined a smaller set of features, leaving much of the control
+interface as implementation defined or device specific, making generic
+emulation challenging with host specific firmware being responsible
+for setup and the Endpoints being presented to operating systems
+as Root Complex Integrated End Points. CXL rev 2.0 looks a lot
+more like PCI Express, with fully specified discoverability
+of the CXL topology.
+
+CXL System components
+----------------------
+A CXL system is made up a Host with a number of 'standard components'
+the control and capabilities of which are discoverable by system software
+using means described in the CXL 2.0 specification.
+
+CXL Fixed Memory Windows (CFMW)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+A CFMW consists of a particular range of Host Physical Address space
+which is routed to particular CXL Host Bridges. At time of generic
+software initialization it will have a particularly interleaving
+configuration and associated Quality of Serice Throtling Group (QTG).
+This information is available to system software, when making
+decisions about how to configure interleave across available CXL
+memory devices. It is provide as CFMW Structures (CFMWS) in
+the CXL Early Discovery Table, an ACPI table.
+
+Note: QTG 0 is the only one currently supported in QEMU.
+
+CXL Host Bridge (CXL HB)
+~~~~~~~~~~~~~~~~~~~~~~~~
+A CXL host bridge is similar to the PCIe equivalent, but with a
+specification defined register interface called CXL Host Bridge
+Component Registers (CHBCR). The location of this CHBCR MMIO
+space is described to system software via a CXL Host Bridge
+Structure (CHBS) in the CEDT ACPI table. The actual interfaces
+are identical to those used for other parts of the CXL heirarchy
+as CXL Component Registers in PCI BARs.
+
+Interfaces provided include:
+
+* Configuration of HDM Decoders to route CXL Memory accesses with
+ a particularly Host Physical Address range to the target port
+ below which the CXL device servicing that address lies. This
+ may be a mapping to a single Root Port (RP) or across a set of
+ target RPs.
+
+CXL Root Ports (CXL RP)
+~~~~~~~~~~~~~~~~~~~~~~~
+A CXL Root Port servers te same purpose as a PCIe Root Port.
+There are a number of CXL specific Designated Vendor Specific
+Extended Capabilities (DVSEC) in PCIe Configuration Space
+and associated component register access via PCI bars.
+
+CXL Switch
+~~~~~~~~~~
+Not yet implemented in QEMU.
+
+Here we consider a simple CXL switch with only a single
+virtual hierarchy. Whilst more complex devices exist, their
+visibility to a particular host is generally the same as for
+a simple switch design. Hosts often have no awareness
+of complex rerouting and device pooling, they simply see
+devices being hot added or hot removed.
+
+A CXL switch has a similar architecture to those in PCIe,
+with a single upstream port, internal PCI bus and multiple
+downstream ports.
+
+Both the CXL upstream and downstream ports have CXL specific
+DVSECs in configuration space, and component registers in PCI
+BARs. The Upstream Port has the configuration interfaces for
+the HDM decoders which route incoming memory accesses to the
+appropriate downstream port.
+
+CXL Memory Devices - Type 3
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+CXL type 3 devices use a PCI class code and are intended to be supported
+by a generic operating system driver. They have HDM decoders
+though in these EP devices, the decoder is reponsible not for
+routing but for translation of the incoming host physical address (HPA)
+into a Device Physical Address (DPA).
+
+CXL Memory Interleave
+---------------------
+To understand the interaction of different CXL hardware components which
+are emulated in QEMU, let us consider a memory read in a fully configured
+CXL topology. Note that system software is responsible for configuration
+of all components with the exception of the CFMWs. System software is
+responsible for allocating appropriate ranges from within the CFMWs
+and exposing those via normal memory configurations as would be done
+for system RAM.
+
+Example system Topology. x marks the match in each decoder level::
+
+ |<------------------SYSTEM PHYSICAL ADDRESS MAP (1)----------------->|
+ | __________ __________________________________ __________ |
+ | | | | | | | |
+ | | CFMW 0 | | CXL Fixed Memory Window 1 | | CFMW 1 | |
+ | | HB0 only | | Configured to interleave memory | | HB1 only | |
+ | | | | memory accesses across HB0/HB1 | | | |
+ | |__________| |_____x____________________________| |__________| |
+ | | | |
+ | | | |
+ | | | |
+ | Interleave Decoder | |
+ | Matches this HB | |
+ \_____________| |_____________/
+ __________|__________ _____|_______________
+ | | | |
+ (2) | CXL HB 0 | | CXL HB 1 |
+ | HB IntLv Decoders | | HB IntLv Decoders |
+ | PCI/CXL Root Bus 0c | | PCI/CXL Root Bus 0d |
+ | | | |
+ |___x_________________| |_____________________|
+ | | | |
+ | | | |
+ A HB 0 HDM Decoder | | |
+ matches this Port | | |
+ | | | |
+ ___________|___ __________|__ __|_________ ___|_________
+ (3)| Root Port 0 | | Root Port 1 | | Root Port 2| | Root Port 3 |
+ | Appears in | | Appears in | | Appears in | | Appear in |
+ | PCI topology | | PCI Topology| | PCI Topo | | PCI Topo |
+ | As 0c:00.0 | | as 0c:01.0 | | as de:00.0 | | as de:01.0 |
+ |_______________| |_____________| |____________| |_____________|
+ | | | |
+ | | | |
+ _____|_________ ______|______ ______|_____ ______|_______
+ (4)| x | | | | | | |
+ | CXL Type3 0 | | CXL Type3 1 | | CXL type3 2| | CLX Type 3 3 |
+ | | | | | | | |
+ | PMEM0(Vol LSA)| | PMEM1 (...) | | PMEM2 (...)| | PMEM3 (...) |
+ | Decoder to go | | | | | | |
+ | from host PA | | PCI 0e:00.0 | | PCI df:00.0| | PCI e0:00.0 |
+ | to device PA | | | | | | |
+ | PCI as 0d:00.0| | | | | | |
+ |_______________| |_____________| |____________| |______________|
+
+Notes:
+
+(1) **3 CXL Fixed Memory Windows (CFMW)** corresponding to different
+ ranges of the system physical address map. Each CFMW has
+ particular interleave setup across the CXL Host Bridges (HB)
+ CFMW0 provides uninterleaved access to HB0, CFW2 provides
+ uninterleaved acess to HB1. CFW1 provides interleaved memory access
+ across HB0 and HB1.
+
+(2) **Two CXL Host Bridges**. Each of these has 2 CXL Root Ports and
+ programmable HDM decoders to route memory accesses either to
+ a single port or interleave them across multiple ports.
+ A complex configuration here, might be to use the following HDM
+ decoders in HB0. HDM0 routes CFMW0 requests to RP0 and hence
+ part of CXL Type3 0. HDM1 routes CFMW0 requests from a
+ different region of the CFMW0 PA range to RP2 and hence part
+ of CXL Type 3 1. HDM2 routes yet another PA range from within
+ CFMW0 to be interleaved across RP0 and RP1, providing 2 way
+ interleave of part of the memory provided by CXL Type3 0 and
+ CXL Type 3 1. HDM3 routes those interleaved accesses from
+ CFMW1 that target HB0 to RP 0 and another part of the memory of
+ CXL Type 3 0 (as part of a 2 way interleave at the system level
+ across for example CXL Type3 0 and CXL Type3 2.
+ HDM4 is used to enable system wide 4 way interleave across all
+ the present CXL type3 devices, by interleaving those (interleaved)
+ requests that HB0 receives from from CFMW1 across RP 0 and
+ RP 1 and hence to yet more regions of the memory of the
+ attached Type3 devices. Note this is a representative subset
+ of the full range of possible HDM decoder configurations in this
+ topology.
+
+(3) **Four CXL Root Ports.** In this case the CXL Type 3 devices are
+ directly attached to these ports.
+
+(4) **Four CXL Type3 memory expansion devices.** These will each have
+ HDM decoders, but in this case rather than performing interleave
+ they will take the Host Physical Addresses of accesses and map
+ them to their own local Device Physical Address Space (DPA).
+
+Example command lines
+---------------------
+A very simple setup with just one directly attached CXL Type 3 device::
+
+ qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+ ...
+ -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa.raw,size=256M \
+ -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+ -device cxl-rp,port=0,bus=cxl.1,id=root_port13,chassis=0,slot=2 \
+ -device cxl-type3,bus=root_port13,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem0 \
+ -cxl-fixed-memory-window targets.0=cxl.1,size=4G
+
+A setup suitable for 4 way interleave. Only one fixed window provided, to enable 2 way
+interleave across 2 CXL host bridges. Each host bridge has 2 CXL Root Ports, with
+the CXL Type3 device directly attached (no switches).::
+
+ qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+ ...
+ -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest.raw,size=256M \
+ -object memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M \
+ -object memory-backend-file,id=cxl-mem3,share=on,mem-path=/tmp/cxltest3.raw,size=256M \
+ -object memory-backend-file,id=cxl-mem4,share=on,mem-path=/tmp/cxltest4.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa2,share=on,mem-path=/tmp/lsa2.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa3,share=on,mem-path=/tmp/lsa3.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa4,share=on,mem-path=/tmp/lsa4.raw,size=256M \
+ -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+ -device pxb-cxl,bus_nr=222,bus=pcie.0,id=cxl.2 \
+ -device cxl-rp,port=0,bus=cxl.1,id=root_port13,chassis=0,slot=2 \
+ -device cxl-type3,bus=root_port13,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem0 \
+ -device cxl-rp,port=1,bus=cxl.1,id=root_port14,chassis=0,slot=3 \
+ -device cxl-type3,bus=root_port14,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem1 \
+ -device cxl-rp,port=0,bus=cxl.2,id=root_port15,chassis=0,slot=5 \
+ -device cxl-type3,bus=root_port15,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem2 \
+ -device cxl-rp,port=1,bus=cxl.2,id=root_port16,chassis=0,slot=6 \
+ -device cxl-type3,bus=root_port16,memdev=cxl-mem4,lsa=cxl-lsa4,id=cxl-pmem3 \
+ -cxl-fixed-memory-window targets.0=cxl.1,targets.1=cxl.2,size=4G,interleave-granularity=8k
+
+Kernel Configuration Options
+----------------------------
+
+In Linux 5.18 the followings options are necessary to make use of
+OS management of CXL memory devices as described here.
+
+* CONFIG_CXL_BUS
+* CONFIG_CXL_PCI
+* CONFIG_CXL_ACPI
+* CONFIG_CXL_PMEM
+* CONFIG_CXL_MEM
+* CONFIG_CXL_PORT
+* CONFIG_CXL_REGION
+
+References
+----------
+
+ - Consortium website for specifications etc:
+ http://www.computeexpresslink.org
+ - Compute Express link Revision 2 specification, October 2020
+ - CEDT CFMWS & QTG _DSM ECN May 2021
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 43/45] pci-bridge/cxl_upstream: Add a CXL switch upstream port
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:41 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
An initial simple upstream port emulation to allow the creation
of CXL switches. The Device ID has been allocated for this use.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/pci-bridge/cxl_upstream.c | 216 +++++++++++++++++++++++++++++++++++
hw/pci-bridge/meson.build | 2 +-
include/hw/cxl/cxl.h | 4 +
3 files changed, 221 insertions(+), 1 deletion(-)
diff --git a/hw/pci-bridge/cxl_upstream.c b/hw/pci-bridge/cxl_upstream.c
new file mode 100644
index 0000000000..6d98f9537a
--- /dev/null
+++ b/hw/pci-bridge/cxl_upstream.c
@@ -0,0 +1,216 @@
+/*
+ * Emulated CXL Switch Upstream Port
+ *
+ * Copyright (c) 2022 Huawei Technologies.
+ *
+ * Based on xio31130_upstream.c
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/pci/msi.h"
+#include "hw/pci/pcie.h"
+#include "hw/pci/pcie_port.h"
+
+#define CXL_UPSTREAM_PORT_MSI_NR_VECTOR 1
+
+#define CXL_UPSTREAM_PORT_MSI_OFFSET 0x70
+#define CXL_UPSTREAM_PORT_PCIE_CAP_OFFSET 0x90
+#define CXL_UPSTREAM_PORT_AER_OFFSET 0x100
+#define CXL_UPSTREAM_PORT_DVSEC_OFFSET \
+ (CXL_UPSTREAM_PORT_AER_OFFSET + PCI_ERR_SIZEOF)
+
+typedef struct CXLUpstreamPort {
+ /*< private >*/
+ PCIEPort parent_obj;
+
+ /*< public >*/
+ CXLComponentState cxl_cstate;
+} CXLUpstreamPort;
+
+CXLComponentState *cxl_usp_to_cstate(CXLUpstreamPort *usp)
+{
+ return &usp->cxl_cstate;
+}
+
+static void cxl_usp_dvsec_write_config(PCIDevice *dev, uint32_t addr,
+ uint32_t val, int len)
+{
+ CXLUpstreamPort *usp = CXL_USP(dev);
+
+ if (range_contains(&usp->cxl_cstate.dvsecs[EXTENSIONS_PORT_DVSEC], addr)) {
+ uint8_t *reg = &dev->config[addr];
+ addr -= usp->cxl_cstate.dvsecs[EXTENSIONS_PORT_DVSEC].lob;
+ if (addr == PORT_CONTROL_OFFSET) {
+ if (pci_get_word(reg) & PORT_CONTROL_UNMASK_SBR) {
+ /* unmask SBR */
+ qemu_log_mask(LOG_UNIMP, "SBR mask control is not supported\n");
+ }
+ if (pci_get_word(reg) & PORT_CONTROL_ALT_MEMID_EN) {
+ /* Alt Memory & ID Space Enable */
+ qemu_log_mask(LOG_UNIMP,
+ "Alt Memory & ID space is not supported\n");
+ }
+ }
+ }
+}
+
+static void cxl_usp_write_config(PCIDevice *d, uint32_t address,
+ uint32_t val, int len)
+{
+ pci_bridge_write_config(d, address, val, len);
+ pcie_cap_flr_write_config(d, address, val, len);
+ pcie_aer_write_config(d, address, val, len);
+
+ cxl_usp_dvsec_write_config(d, address, val, len);
+}
+
+static void latch_registers(CXLUpstreamPort *usp)
+{
+ uint32_t *reg_state = usp->cxl_cstate.crb.cache_mem_registers;
+ uint32_t *write_msk = usp->cxl_cstate.crb.cache_mem_regs_write_mask;
+
+ cxl_component_register_init_common(reg_state, write_msk,
+ CXL2_UPSTREAM_PORT);
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 8);
+}
+
+static void cxl_usp_reset(DeviceState *qdev)
+{
+ PCIDevice *d = PCI_DEVICE(qdev);
+ CXLUpstreamPort *usp = CXL_USP(qdev);
+
+ pci_bridge_reset(qdev);
+ pcie_cap_deverr_reset(d);
+ latch_registers(usp);
+}
+
+static void build_dvsecs(CXLComponentState *cxl)
+{
+ uint8_t *dvsec;
+
+ dvsec = (uint8_t *)&(CXLDVSECPortExtensions){
+ .status = 0x1, /* Port Power Management Init Complete */
+ };
+ cxl_component_create_dvsec(cxl, CXL2_UPSTREAM_PORT,
+ EXTENSIONS_PORT_DVSEC_LENGTH,
+ EXTENSIONS_PORT_DVSEC,
+ EXTENSIONS_PORT_DVSEC_REVID, dvsec);
+ dvsec = (uint8_t *)&(CXLDVSECPortFlexBus){
+ .cap = 0x27, /* Cache, IO, Mem, non-MLD */
+ .ctrl = 0x27, /* Cache, IO, Mem */
+ .status = 0x26, /* same */
+ .rcvd_mod_ts_data_phase1 = 0xef, /* WTF? */
+ };
+ cxl_component_create_dvsec(cxl, CXL2_UPSTREAM_PORT,
+ PCIE_FLEXBUS_PORT_DVSEC_LENGTH_2_0,
+ PCIE_FLEXBUS_PORT_DVSEC,
+ PCIE_FLEXBUS_PORT_DVSEC_REVID_2_0, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){
+ .rsvd = 0,
+ .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX,
+ .reg0_base_hi = 0,
+ };
+ cxl_component_create_dvsec(cxl, CXL2_UPSTREAM_PORT,
+ REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC,
+ REG_LOC_DVSEC_REVID, dvsec);
+}
+
+static void cxl_usp_realize(PCIDevice *d, Error **errp)
+{
+ PCIEPort *p = PCIE_PORT(d);
+ CXLUpstreamPort *usp = CXL_USP(d);
+ CXLComponentState *cxl_cstate = &usp->cxl_cstate;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ MemoryRegion *component_bar = &cregs->component_registers;
+ int rc;
+
+ pci_bridge_initfn(d, TYPE_PCIE_BUS);
+ pcie_port_init_reg(d);
+
+ rc = msi_init(d, CXL_UPSTREAM_PORT_MSI_OFFSET,
+ CXL_UPSTREAM_PORT_MSI_NR_VECTOR, true, true, errp);
+ if (rc) {
+ assert(rc == -ENOTSUP);
+ goto err_bridge;
+ }
+
+ rc = pcie_cap_init(d, CXL_UPSTREAM_PORT_PCIE_CAP_OFFSET,
+ PCI_EXP_TYPE_UPSTREAM, p->port, errp);
+ if (rc < 0) {
+ goto err_msi;
+ }
+
+ pcie_cap_flr_init(d);
+ pcie_cap_deverr_init(d);
+ rc = pcie_aer_init(d, PCI_ERR_VER, CXL_UPSTREAM_PORT_AER_OFFSET,
+ PCI_ERR_SIZEOF, errp);
+ if (rc) {
+ goto err_cap;
+ }
+
+ cxl_cstate->dvsec_offset = CXL_UPSTREAM_PORT_DVSEC_OFFSET;
+ cxl_cstate->pdev = d;
+ build_dvsecs(cxl_cstate);
+ cxl_component_register_block_init(OBJECT(d), cxl_cstate, TYPE_CXL_USP);
+ pci_register_bar(d, CXL_COMPONENT_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64,
+ component_bar);
+
+ return;
+
+err_cap:
+ pcie_cap_exit(d);
+err_msi:
+ msi_uninit(d);
+err_bridge:
+ pci_bridge_exitfn(d);
+}
+
+static void cxl_usp_exitfn(PCIDevice *d)
+{
+ pcie_aer_exit(d);
+ pcie_cap_exit(d);
+ msi_uninit(d);
+ pci_bridge_exitfn(d);
+}
+
+static void cxl_upstream_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(oc);
+
+ k->is_bridge = true;
+ k->config_write = cxl_usp_write_config;
+ k->realize = cxl_usp_realize;
+ k->exit = cxl_usp_exitfn;
+ k->vendor_id = 0x19e5; /* Huawei */
+ k->device_id = 0xa128; /* Emulated CXL Switch Upstream Port */
+ k->revision = 0;
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+ dc->desc = "CXL Switch Upstream Port";
+ dc->reset = cxl_usp_reset;
+}
+
+static const TypeInfo cxl_usp_info = {
+ .name = TYPE_CXL_USP,
+ .parent = TYPE_PCIE_PORT,
+ .instance_size = sizeof(CXLUpstreamPort),
+ .class_init = cxl_upstream_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_PCIE_DEVICE },
+ { INTERFACE_CXL_DEVICE },
+ { }
+ },
+};
+
+static void cxl_usp_register_type(void)
+{
+ type_register_static(&cxl_usp_info);
+}
+
+type_init(cxl_usp_register_type);
diff --git a/hw/pci-bridge/meson.build b/hw/pci-bridge/meson.build
index b6d26a03d5..4a8c26b5a1 100644
--- a/hw/pci-bridge/meson.build
+++ b/hw/pci-bridge/meson.build
@@ -5,7 +5,7 @@ pci_ss.add(when: 'CONFIG_IOH3420', if_true: files('ioh3420.c'))
pci_ss.add(when: 'CONFIG_PCIE_PORT', if_true: files('pcie_root_port.c', 'gen_pcie_root_port.c', 'pcie_pci_bridge.c'))
pci_ss.add(when: 'CONFIG_PXB', if_true: files('pci_expander_bridge.c'))
pci_ss.add(when: 'CONFIG_XIO3130', if_true: files('xio3130_upstream.c', 'xio3130_downstream.c'))
-pci_ss.add(when: 'CONFIG_CXL', if_true: files('cxl_root_port.c'))
+pci_ss.add(when: 'CONFIG_CXL', if_true: files('cxl_root_port.c', 'cxl_upstream.c'))
# NewWorld PowerMac
pci_ss.add(when: 'CONFIG_DEC_PCI', if_true: files('dec.c'))
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 21d28ca110..ff7b296b9f 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -57,5 +57,9 @@ void cxl_fixed_memory_window_config(MachineState *ms,
void cxl_fixed_memory_window_link_targets(Error **errp);
extern const MemoryRegionOps cfmws_ops;
+#define TYPE_CXL_USP "cxl-upstream"
+typedef struct CXLUpstreamPort CXLUpstreamPort;
+DECLARE_INSTANCE_CHECKER(CXLUpstreamPort, CXL_USP, TYPE_CXL_USP)
+CXLComponentState *cxl_usp_to_cstate(CXLUpstreamPort *usp);
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 43/45] pci-bridge/cxl_upstream: Add a CXL switch upstream port
@ 2022-04-29 14:41 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
An initial simple upstream port emulation to allow the creation
of CXL switches. The Device ID has been allocated for this use.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/pci-bridge/cxl_upstream.c | 216 +++++++++++++++++++++++++++++++++++
hw/pci-bridge/meson.build | 2 +-
include/hw/cxl/cxl.h | 4 +
3 files changed, 221 insertions(+), 1 deletion(-)
diff --git a/hw/pci-bridge/cxl_upstream.c b/hw/pci-bridge/cxl_upstream.c
new file mode 100644
index 0000000000..6d98f9537a
--- /dev/null
+++ b/hw/pci-bridge/cxl_upstream.c
@@ -0,0 +1,216 @@
+/*
+ * Emulated CXL Switch Upstream Port
+ *
+ * Copyright (c) 2022 Huawei Technologies.
+ *
+ * Based on xio31130_upstream.c
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/pci/msi.h"
+#include "hw/pci/pcie.h"
+#include "hw/pci/pcie_port.h"
+
+#define CXL_UPSTREAM_PORT_MSI_NR_VECTOR 1
+
+#define CXL_UPSTREAM_PORT_MSI_OFFSET 0x70
+#define CXL_UPSTREAM_PORT_PCIE_CAP_OFFSET 0x90
+#define CXL_UPSTREAM_PORT_AER_OFFSET 0x100
+#define CXL_UPSTREAM_PORT_DVSEC_OFFSET \
+ (CXL_UPSTREAM_PORT_AER_OFFSET + PCI_ERR_SIZEOF)
+
+typedef struct CXLUpstreamPort {
+ /*< private >*/
+ PCIEPort parent_obj;
+
+ /*< public >*/
+ CXLComponentState cxl_cstate;
+} CXLUpstreamPort;
+
+CXLComponentState *cxl_usp_to_cstate(CXLUpstreamPort *usp)
+{
+ return &usp->cxl_cstate;
+}
+
+static void cxl_usp_dvsec_write_config(PCIDevice *dev, uint32_t addr,
+ uint32_t val, int len)
+{
+ CXLUpstreamPort *usp = CXL_USP(dev);
+
+ if (range_contains(&usp->cxl_cstate.dvsecs[EXTENSIONS_PORT_DVSEC], addr)) {
+ uint8_t *reg = &dev->config[addr];
+ addr -= usp->cxl_cstate.dvsecs[EXTENSIONS_PORT_DVSEC].lob;
+ if (addr == PORT_CONTROL_OFFSET) {
+ if (pci_get_word(reg) & PORT_CONTROL_UNMASK_SBR) {
+ /* unmask SBR */
+ qemu_log_mask(LOG_UNIMP, "SBR mask control is not supported\n");
+ }
+ if (pci_get_word(reg) & PORT_CONTROL_ALT_MEMID_EN) {
+ /* Alt Memory & ID Space Enable */
+ qemu_log_mask(LOG_UNIMP,
+ "Alt Memory & ID space is not supported\n");
+ }
+ }
+ }
+}
+
+static void cxl_usp_write_config(PCIDevice *d, uint32_t address,
+ uint32_t val, int len)
+{
+ pci_bridge_write_config(d, address, val, len);
+ pcie_cap_flr_write_config(d, address, val, len);
+ pcie_aer_write_config(d, address, val, len);
+
+ cxl_usp_dvsec_write_config(d, address, val, len);
+}
+
+static void latch_registers(CXLUpstreamPort *usp)
+{
+ uint32_t *reg_state = usp->cxl_cstate.crb.cache_mem_registers;
+ uint32_t *write_msk = usp->cxl_cstate.crb.cache_mem_regs_write_mask;
+
+ cxl_component_register_init_common(reg_state, write_msk,
+ CXL2_UPSTREAM_PORT);
+ ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 8);
+}
+
+static void cxl_usp_reset(DeviceState *qdev)
+{
+ PCIDevice *d = PCI_DEVICE(qdev);
+ CXLUpstreamPort *usp = CXL_USP(qdev);
+
+ pci_bridge_reset(qdev);
+ pcie_cap_deverr_reset(d);
+ latch_registers(usp);
+}
+
+static void build_dvsecs(CXLComponentState *cxl)
+{
+ uint8_t *dvsec;
+
+ dvsec = (uint8_t *)&(CXLDVSECPortExtensions){
+ .status = 0x1, /* Port Power Management Init Complete */
+ };
+ cxl_component_create_dvsec(cxl, CXL2_UPSTREAM_PORT,
+ EXTENSIONS_PORT_DVSEC_LENGTH,
+ EXTENSIONS_PORT_DVSEC,
+ EXTENSIONS_PORT_DVSEC_REVID, dvsec);
+ dvsec = (uint8_t *)&(CXLDVSECPortFlexBus){
+ .cap = 0x27, /* Cache, IO, Mem, non-MLD */
+ .ctrl = 0x27, /* Cache, IO, Mem */
+ .status = 0x26, /* same */
+ .rcvd_mod_ts_data_phase1 = 0xef, /* WTF? */
+ };
+ cxl_component_create_dvsec(cxl, CXL2_UPSTREAM_PORT,
+ PCIE_FLEXBUS_PORT_DVSEC_LENGTH_2_0,
+ PCIE_FLEXBUS_PORT_DVSEC,
+ PCIE_FLEXBUS_PORT_DVSEC_REVID_2_0, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){
+ .rsvd = 0,
+ .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX,
+ .reg0_base_hi = 0,
+ };
+ cxl_component_create_dvsec(cxl, CXL2_UPSTREAM_PORT,
+ REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC,
+ REG_LOC_DVSEC_REVID, dvsec);
+}
+
+static void cxl_usp_realize(PCIDevice *d, Error **errp)
+{
+ PCIEPort *p = PCIE_PORT(d);
+ CXLUpstreamPort *usp = CXL_USP(d);
+ CXLComponentState *cxl_cstate = &usp->cxl_cstate;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ MemoryRegion *component_bar = &cregs->component_registers;
+ int rc;
+
+ pci_bridge_initfn(d, TYPE_PCIE_BUS);
+ pcie_port_init_reg(d);
+
+ rc = msi_init(d, CXL_UPSTREAM_PORT_MSI_OFFSET,
+ CXL_UPSTREAM_PORT_MSI_NR_VECTOR, true, true, errp);
+ if (rc) {
+ assert(rc == -ENOTSUP);
+ goto err_bridge;
+ }
+
+ rc = pcie_cap_init(d, CXL_UPSTREAM_PORT_PCIE_CAP_OFFSET,
+ PCI_EXP_TYPE_UPSTREAM, p->port, errp);
+ if (rc < 0) {
+ goto err_msi;
+ }
+
+ pcie_cap_flr_init(d);
+ pcie_cap_deverr_init(d);
+ rc = pcie_aer_init(d, PCI_ERR_VER, CXL_UPSTREAM_PORT_AER_OFFSET,
+ PCI_ERR_SIZEOF, errp);
+ if (rc) {
+ goto err_cap;
+ }
+
+ cxl_cstate->dvsec_offset = CXL_UPSTREAM_PORT_DVSEC_OFFSET;
+ cxl_cstate->pdev = d;
+ build_dvsecs(cxl_cstate);
+ cxl_component_register_block_init(OBJECT(d), cxl_cstate, TYPE_CXL_USP);
+ pci_register_bar(d, CXL_COMPONENT_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64,
+ component_bar);
+
+ return;
+
+err_cap:
+ pcie_cap_exit(d);
+err_msi:
+ msi_uninit(d);
+err_bridge:
+ pci_bridge_exitfn(d);
+}
+
+static void cxl_usp_exitfn(PCIDevice *d)
+{
+ pcie_aer_exit(d);
+ pcie_cap_exit(d);
+ msi_uninit(d);
+ pci_bridge_exitfn(d);
+}
+
+static void cxl_upstream_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(oc);
+
+ k->is_bridge = true;
+ k->config_write = cxl_usp_write_config;
+ k->realize = cxl_usp_realize;
+ k->exit = cxl_usp_exitfn;
+ k->vendor_id = 0x19e5; /* Huawei */
+ k->device_id = 0xa128; /* Emulated CXL Switch Upstream Port */
+ k->revision = 0;
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+ dc->desc = "CXL Switch Upstream Port";
+ dc->reset = cxl_usp_reset;
+}
+
+static const TypeInfo cxl_usp_info = {
+ .name = TYPE_CXL_USP,
+ .parent = TYPE_PCIE_PORT,
+ .instance_size = sizeof(CXLUpstreamPort),
+ .class_init = cxl_upstream_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_PCIE_DEVICE },
+ { INTERFACE_CXL_DEVICE },
+ { }
+ },
+};
+
+static void cxl_usp_register_type(void)
+{
+ type_register_static(&cxl_usp_info);
+}
+
+type_init(cxl_usp_register_type);
diff --git a/hw/pci-bridge/meson.build b/hw/pci-bridge/meson.build
index b6d26a03d5..4a8c26b5a1 100644
--- a/hw/pci-bridge/meson.build
+++ b/hw/pci-bridge/meson.build
@@ -5,7 +5,7 @@ pci_ss.add(when: 'CONFIG_IOH3420', if_true: files('ioh3420.c'))
pci_ss.add(when: 'CONFIG_PCIE_PORT', if_true: files('pcie_root_port.c', 'gen_pcie_root_port.c', 'pcie_pci_bridge.c'))
pci_ss.add(when: 'CONFIG_PXB', if_true: files('pci_expander_bridge.c'))
pci_ss.add(when: 'CONFIG_XIO3130', if_true: files('xio3130_upstream.c', 'xio3130_downstream.c'))
-pci_ss.add(when: 'CONFIG_CXL', if_true: files('cxl_root_port.c'))
+pci_ss.add(when: 'CONFIG_CXL', if_true: files('cxl_root_port.c', 'cxl_upstream.c'))
# NewWorld PowerMac
pci_ss.add(when: 'CONFIG_DEC_PCI', if_true: files('dec.c'))
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 21d28ca110..ff7b296b9f 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -57,5 +57,9 @@ void cxl_fixed_memory_window_config(MachineState *ms,
void cxl_fixed_memory_window_link_targets(Error **errp);
extern const MemoryRegionOps cfmws_ops;
+#define TYPE_CXL_USP "cxl-upstream"
+typedef struct CXLUpstreamPort CXLUpstreamPort;
+DECLARE_INSTANCE_CHECKER(CXLUpstreamPort, CXL_USP, TYPE_CXL_USP)
+CXLComponentState *cxl_usp_to_cstate(CXLUpstreamPort *usp);
#endif
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 44/45] pci-bridge/cxl_downstream: Add a CXL switch downstream port
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:41 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Emulation of a simple CXL Switch downstream port.
The Device ID has been allocated for this use.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-host.c | 43 +++++-
hw/pci-bridge/cxl_downstream.c | 249 +++++++++++++++++++++++++++++++++
hw/pci-bridge/meson.build | 2 +-
3 files changed, 291 insertions(+), 3 deletions(-)
diff --git a/hw/cxl/cxl-host.c b/hw/cxl/cxl-host.c
index 469b3c4ced..317f5a37ca 100644
--- a/hw/cxl/cxl-host.c
+++ b/hw/cxl/cxl-host.c
@@ -130,8 +130,9 @@ static bool cxl_hdm_find_target(uint32_t *cache_mem, hwaddr addr,
static PCIDevice *cxl_cfmws_find_device(CXLFixedWindow *fw, hwaddr addr)
{
- CXLComponentState *hb_cstate;
+ CXLComponentState *hb_cstate, *usp_cstate;
PCIHostState *hb;
+ CXLUpstreamPort *usp;
int rb_index;
uint32_t *cache_mem;
uint8_t target;
@@ -165,8 +166,46 @@ static PCIDevice *cxl_cfmws_find_device(CXLFixedWindow *fw, hwaddr addr)
}
d = pci_bridge_get_sec_bus(PCI_BRIDGE(rp))->devices[0];
+ if (!d) {
+ return NULL;
+ }
+
+ if (object_dynamic_cast(OBJECT(d), TYPE_CXL_TYPE3)) {
+ return d;
+ }
+
+ /*
+ * Could also be a switch. Note only one level of switching currently
+ * supported.
+ */
+ if (!object_dynamic_cast(OBJECT(d), TYPE_CXL_USP)) {
+ return NULL;
+ }
+ usp = CXL_USP(d);
+
+ usp_cstate = cxl_usp_to_cstate(usp);
+ if (!usp_cstate) {
+ return NULL;
+ }
+
+ cache_mem = usp_cstate->crb.cache_mem_registers;
+
+ target_found = cxl_hdm_find_target(cache_mem, addr, &target);
+ if (!target_found) {
+ return NULL;
+ }
+
+ d = pcie_find_port_by_pn(&PCI_BRIDGE(d)->sec_bus, target);
+ if (!d) {
+ return NULL;
+ }
+
+ d = pci_bridge_get_sec_bus(PCI_BRIDGE(d))->devices[0];
+ if (!d) {
+ return NULL;
+ }
- if (!d || !object_dynamic_cast(OBJECT(d), TYPE_CXL_TYPE3)) {
+ if (!object_dynamic_cast(OBJECT(d), TYPE_CXL_TYPE3)) {
return NULL;
}
diff --git a/hw/pci-bridge/cxl_downstream.c b/hw/pci-bridge/cxl_downstream.c
new file mode 100644
index 0000000000..f181960d5e
--- /dev/null
+++ b/hw/pci-bridge/cxl_downstream.c
@@ -0,0 +1,249 @@
+/*
+ * Emulated CXL Switch Downstream Port
+ *
+ * Copyright (c) 2022 Huawei Technologies.
+ *
+ * Based on xio31130_downstream.c
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/pci/msi.h"
+#include "hw/pci/pcie.h"
+#include "hw/pci/pcie_port.h"
+#include "qapi/error.h"
+
+typedef struct CXLDownStreamPort {
+ /*< private >*/
+ PCIESlot parent_obj;
+
+ /*< public >*/
+ CXLComponentState cxl_cstate;
+} CXLDownstreamPort;
+
+#define TYPE_CXL_DSP "cxl-downstream"
+DECLARE_INSTANCE_CHECKER(CXLDownstreamPort, CXL_DSP, TYPE_CXL_DSP)
+
+#define CXL_DOWNSTREAM_PORT_MSI_OFFSET 0x70
+#define CXL_DOWNSTREAM_PORT_MSI_NR_VECTOR 1
+#define CXL_DOWNSTREAM_PORT_EXP_OFFSET 0x90
+#define CXL_DOWNSTREAM_PORT_AER_OFFSET 0x100
+#define CXL_DOWNSTREAM_PORT_DVSEC_OFFSET \
+ (CXL_DOWNSTREAM_PORT_AER_OFFSET + PCI_ERR_SIZEOF)
+
+static void latch_registers(CXLDownstreamPort *dsp)
+{
+ uint32_t *reg_state = dsp->cxl_cstate.crb.cache_mem_registers;
+ uint32_t *write_msk = dsp->cxl_cstate.crb.cache_mem_regs_write_mask;
+
+ cxl_component_register_init_common(reg_state, write_msk,
+ CXL2_DOWNSTREAM_PORT);
+}
+
+/* TODO: Look at sharing this code acorss all CXL port types */
+static void cxl_dsp_dvsec_write_config(PCIDevice *dev, uint32_t addr,
+ uint32_t val, int len)
+{
+ CXLDownstreamPort *dsp = CXL_DSP(dev);
+ CXLComponentState *cxl_cstate = &dsp->cxl_cstate;
+
+ if (range_contains(&cxl_cstate->dvsecs[EXTENSIONS_PORT_DVSEC], addr)) {
+ uint8_t *reg = &dev->config[addr];
+ addr -= cxl_cstate->dvsecs[EXTENSIONS_PORT_DVSEC].lob;
+ if (addr == PORT_CONTROL_OFFSET) {
+ if (pci_get_word(reg) & PORT_CONTROL_UNMASK_SBR) {
+ /* unmask SBR */
+ qemu_log_mask(LOG_UNIMP, "SBR mask control is not supported\n");
+ }
+ if (pci_get_word(reg) & PORT_CONTROL_ALT_MEMID_EN) {
+ /* Alt Memory & ID Space Enable */
+ qemu_log_mask(LOG_UNIMP,
+ "Alt Memory & ID space is not supported\n");
+
+ }
+ }
+ }
+}
+
+static void cxl_dsp_config_write(PCIDevice *d, uint32_t address,
+ uint32_t val, int len)
+{
+ uint16_t slt_ctl, slt_sta;
+
+ pcie_cap_slot_get(d, &slt_ctl, &slt_sta);
+ pci_bridge_write_config(d, address, val, len);
+ pcie_cap_flr_write_config(d, address, val, len);
+ pcie_cap_slot_write_config(d, slt_ctl, slt_sta, address, val, len);
+ pcie_aer_write_config(d, address, val, len);
+
+ cxl_dsp_dvsec_write_config(d, address, val, len);
+}
+
+static void cxl_dsp_reset(DeviceState *qdev)
+{
+ PCIDevice *d = PCI_DEVICE(qdev);
+ CXLDownstreamPort *dsp = CXL_DSP(qdev);
+
+ pcie_cap_deverr_reset(d);
+ pcie_cap_slot_reset(d);
+ pcie_cap_arifwd_reset(d);
+ pci_bridge_reset(qdev);
+
+ latch_registers(dsp);
+}
+
+static void build_dvsecs(CXLComponentState *cxl)
+{
+ uint8_t *dvsec;
+
+ dvsec = (uint8_t *)&(CXLDVSECPortExtensions){ 0 };
+ cxl_component_create_dvsec(cxl, CXL2_DOWNSTREAM_PORT,
+ EXTENSIONS_PORT_DVSEC_LENGTH,
+ EXTENSIONS_PORT_DVSEC,
+ EXTENSIONS_PORT_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECPortFlexBus){
+ .cap = 0x27, /* Cache, IO, Mem, non-MLD */
+ .ctrl = 0x02, /* IO always enabled */
+ .status = 0x26, /* same */
+ .rcvd_mod_ts_data_phase1 = 0xef, /* WTF? */
+ };
+ cxl_component_create_dvsec(cxl, CXL2_DOWNSTREAM_PORT,
+ PCIE_FLEXBUS_PORT_DVSEC_LENGTH_2_0,
+ PCIE_FLEXBUS_PORT_DVSEC,
+ PCIE_FLEXBUS_PORT_DVSEC_REVID_2_0, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECPortGPF){
+ .rsvd = 0,
+ .phase1_ctrl = 1, /* 1μs timeout */
+ .phase2_ctrl = 1, /* 1μs timeout */
+ };
+ cxl_component_create_dvsec(cxl, CXL2_DOWNSTREAM_PORT,
+ GPF_PORT_DVSEC_LENGTH, GPF_PORT_DVSEC,
+ GPF_PORT_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){
+ .rsvd = 0,
+ .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX,
+ .reg0_base_hi = 0,
+ };
+ cxl_component_create_dvsec(cxl, CXL2_DOWNSTREAM_PORT,
+ REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC,
+ REG_LOC_DVSEC_REVID, dvsec);
+}
+
+static void cxl_dsp_realize(PCIDevice *d, Error **errp)
+{
+ PCIEPort *p = PCIE_PORT(d);
+ PCIESlot *s = PCIE_SLOT(d);
+ CXLDownstreamPort *dsp = CXL_DSP(d);
+ CXLComponentState *cxl_cstate = &dsp->cxl_cstate;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ MemoryRegion *component_bar = &cregs->component_registers;
+ int rc;
+
+ pci_bridge_initfn(d, TYPE_PCIE_BUS);
+ pcie_port_init_reg(d);
+
+ rc = msi_init(d, CXL_DOWNSTREAM_PORT_MSI_OFFSET,
+ CXL_DOWNSTREAM_PORT_MSI_NR_VECTOR,
+ true, true, errp);
+ if (rc) {
+ assert(rc == -ENOTSUP);
+ goto err_bridge;
+ }
+
+ rc = pcie_cap_init(d, CXL_DOWNSTREAM_PORT_EXP_OFFSET,
+ PCI_EXP_TYPE_DOWNSTREAM, p->port,
+ errp);
+ if (rc < 0) {
+ goto err_msi;
+ }
+
+ pcie_cap_flr_init(d);
+ pcie_cap_deverr_init(d);
+ pcie_cap_slot_init(d, s);
+ pcie_cap_arifwd_init(d);
+
+ pcie_chassis_create(s->chassis);
+ rc = pcie_chassis_add_slot(s);
+ if (rc < 0) {
+ error_setg(errp, "Can't add chassis slot, error %d", rc);
+ goto err_pcie_cap;
+ }
+
+ rc = pcie_aer_init(d, PCI_ERR_VER, CXL_DOWNSTREAM_PORT_AER_OFFSET,
+ PCI_ERR_SIZEOF, errp);
+ if (rc < 0) {
+ goto err_chassis;
+ }
+
+ cxl_cstate->dvsec_offset = CXL_DOWNSTREAM_PORT_DVSEC_OFFSET;
+ cxl_cstate->pdev = d;
+ build_dvsecs(cxl_cstate);
+ cxl_component_register_block_init(OBJECT(d), cxl_cstate, TYPE_CXL_DSP);
+ pci_register_bar(d, CXL_COMPONENT_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64,
+ component_bar);
+
+ return;
+
+ err_chassis:
+ pcie_chassis_del_slot(s);
+ err_pcie_cap:
+ pcie_cap_exit(d);
+ err_msi:
+ msi_uninit(d);
+ err_bridge:
+ pci_bridge_exitfn(d);
+}
+
+static void cxl_dsp_exitfn(PCIDevice *d)
+{
+ PCIESlot *s = PCIE_SLOT(d);
+
+ pcie_aer_exit(d);
+ pcie_chassis_del_slot(s);
+ pcie_cap_exit(d);
+ msi_uninit(d);
+ pci_bridge_exitfn(d);
+}
+
+static void cxl_dsp_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(oc);
+
+ k->is_bridge = true;
+ k->config_write = cxl_dsp_config_write;
+ k->realize = cxl_dsp_realize;
+ k->exit = cxl_dsp_exitfn;
+ k->vendor_id = 0x19e5; /* Huawei */
+ k->device_id = 0xa129; /* Emulated CXL Switch Downstream Port */
+ k->revision = 0;
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+ dc->desc = "CXL Switch Downstream Port";
+ dc->reset = cxl_dsp_reset;
+}
+
+static const TypeInfo cxl_dsp_info = {
+ .name = TYPE_CXL_DSP,
+ .instance_size = sizeof(CXLDownstreamPort),
+ .parent = TYPE_PCIE_SLOT,
+ .class_init = cxl_dsp_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_PCIE_DEVICE },
+ { INTERFACE_CXL_DEVICE },
+ { }
+ },
+};
+
+static void cxl_dsp_register_type(void)
+{
+ type_register_static(&cxl_dsp_info);
+}
+
+type_init(cxl_dsp_register_type);
diff --git a/hw/pci-bridge/meson.build b/hw/pci-bridge/meson.build
index 4a8c26b5a1..53cc53314a 100644
--- a/hw/pci-bridge/meson.build
+++ b/hw/pci-bridge/meson.build
@@ -5,7 +5,7 @@ pci_ss.add(when: 'CONFIG_IOH3420', if_true: files('ioh3420.c'))
pci_ss.add(when: 'CONFIG_PCIE_PORT', if_true: files('pcie_root_port.c', 'gen_pcie_root_port.c', 'pcie_pci_bridge.c'))
pci_ss.add(when: 'CONFIG_PXB', if_true: files('pci_expander_bridge.c'))
pci_ss.add(when: 'CONFIG_XIO3130', if_true: files('xio3130_upstream.c', 'xio3130_downstream.c'))
-pci_ss.add(when: 'CONFIG_CXL', if_true: files('cxl_root_port.c', 'cxl_upstream.c'))
+pci_ss.add(when: 'CONFIG_CXL', if_true: files('cxl_root_port.c', 'cxl_upstream.c', 'cxl_downstream.c'))
# NewWorld PowerMac
pci_ss.add(when: 'CONFIG_DEC_PCI', if_true: files('dec.c'))
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 44/45] pci-bridge/cxl_downstream: Add a CXL switch downstream port
@ 2022-04-29 14:41 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Emulation of a simple CXL Switch downstream port.
The Device ID has been allocated for this use.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-host.c | 43 +++++-
hw/pci-bridge/cxl_downstream.c | 249 +++++++++++++++++++++++++++++++++
hw/pci-bridge/meson.build | 2 +-
3 files changed, 291 insertions(+), 3 deletions(-)
diff --git a/hw/cxl/cxl-host.c b/hw/cxl/cxl-host.c
index 469b3c4ced..317f5a37ca 100644
--- a/hw/cxl/cxl-host.c
+++ b/hw/cxl/cxl-host.c
@@ -130,8 +130,9 @@ static bool cxl_hdm_find_target(uint32_t *cache_mem, hwaddr addr,
static PCIDevice *cxl_cfmws_find_device(CXLFixedWindow *fw, hwaddr addr)
{
- CXLComponentState *hb_cstate;
+ CXLComponentState *hb_cstate, *usp_cstate;
PCIHostState *hb;
+ CXLUpstreamPort *usp;
int rb_index;
uint32_t *cache_mem;
uint8_t target;
@@ -165,8 +166,46 @@ static PCIDevice *cxl_cfmws_find_device(CXLFixedWindow *fw, hwaddr addr)
}
d = pci_bridge_get_sec_bus(PCI_BRIDGE(rp))->devices[0];
+ if (!d) {
+ return NULL;
+ }
+
+ if (object_dynamic_cast(OBJECT(d), TYPE_CXL_TYPE3)) {
+ return d;
+ }
+
+ /*
+ * Could also be a switch. Note only one level of switching currently
+ * supported.
+ */
+ if (!object_dynamic_cast(OBJECT(d), TYPE_CXL_USP)) {
+ return NULL;
+ }
+ usp = CXL_USP(d);
+
+ usp_cstate = cxl_usp_to_cstate(usp);
+ if (!usp_cstate) {
+ return NULL;
+ }
+
+ cache_mem = usp_cstate->crb.cache_mem_registers;
+
+ target_found = cxl_hdm_find_target(cache_mem, addr, &target);
+ if (!target_found) {
+ return NULL;
+ }
+
+ d = pcie_find_port_by_pn(&PCI_BRIDGE(d)->sec_bus, target);
+ if (!d) {
+ return NULL;
+ }
+
+ d = pci_bridge_get_sec_bus(PCI_BRIDGE(d))->devices[0];
+ if (!d) {
+ return NULL;
+ }
- if (!d || !object_dynamic_cast(OBJECT(d), TYPE_CXL_TYPE3)) {
+ if (!object_dynamic_cast(OBJECT(d), TYPE_CXL_TYPE3)) {
return NULL;
}
diff --git a/hw/pci-bridge/cxl_downstream.c b/hw/pci-bridge/cxl_downstream.c
new file mode 100644
index 0000000000..f181960d5e
--- /dev/null
+++ b/hw/pci-bridge/cxl_downstream.c
@@ -0,0 +1,249 @@
+/*
+ * Emulated CXL Switch Downstream Port
+ *
+ * Copyright (c) 2022 Huawei Technologies.
+ *
+ * Based on xio31130_downstream.c
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/pci/msi.h"
+#include "hw/pci/pcie.h"
+#include "hw/pci/pcie_port.h"
+#include "qapi/error.h"
+
+typedef struct CXLDownStreamPort {
+ /*< private >*/
+ PCIESlot parent_obj;
+
+ /*< public >*/
+ CXLComponentState cxl_cstate;
+} CXLDownstreamPort;
+
+#define TYPE_CXL_DSP "cxl-downstream"
+DECLARE_INSTANCE_CHECKER(CXLDownstreamPort, CXL_DSP, TYPE_CXL_DSP)
+
+#define CXL_DOWNSTREAM_PORT_MSI_OFFSET 0x70
+#define CXL_DOWNSTREAM_PORT_MSI_NR_VECTOR 1
+#define CXL_DOWNSTREAM_PORT_EXP_OFFSET 0x90
+#define CXL_DOWNSTREAM_PORT_AER_OFFSET 0x100
+#define CXL_DOWNSTREAM_PORT_DVSEC_OFFSET \
+ (CXL_DOWNSTREAM_PORT_AER_OFFSET + PCI_ERR_SIZEOF)
+
+static void latch_registers(CXLDownstreamPort *dsp)
+{
+ uint32_t *reg_state = dsp->cxl_cstate.crb.cache_mem_registers;
+ uint32_t *write_msk = dsp->cxl_cstate.crb.cache_mem_regs_write_mask;
+
+ cxl_component_register_init_common(reg_state, write_msk,
+ CXL2_DOWNSTREAM_PORT);
+}
+
+/* TODO: Look at sharing this code acorss all CXL port types */
+static void cxl_dsp_dvsec_write_config(PCIDevice *dev, uint32_t addr,
+ uint32_t val, int len)
+{
+ CXLDownstreamPort *dsp = CXL_DSP(dev);
+ CXLComponentState *cxl_cstate = &dsp->cxl_cstate;
+
+ if (range_contains(&cxl_cstate->dvsecs[EXTENSIONS_PORT_DVSEC], addr)) {
+ uint8_t *reg = &dev->config[addr];
+ addr -= cxl_cstate->dvsecs[EXTENSIONS_PORT_DVSEC].lob;
+ if (addr == PORT_CONTROL_OFFSET) {
+ if (pci_get_word(reg) & PORT_CONTROL_UNMASK_SBR) {
+ /* unmask SBR */
+ qemu_log_mask(LOG_UNIMP, "SBR mask control is not supported\n");
+ }
+ if (pci_get_word(reg) & PORT_CONTROL_ALT_MEMID_EN) {
+ /* Alt Memory & ID Space Enable */
+ qemu_log_mask(LOG_UNIMP,
+ "Alt Memory & ID space is not supported\n");
+
+ }
+ }
+ }
+}
+
+static void cxl_dsp_config_write(PCIDevice *d, uint32_t address,
+ uint32_t val, int len)
+{
+ uint16_t slt_ctl, slt_sta;
+
+ pcie_cap_slot_get(d, &slt_ctl, &slt_sta);
+ pci_bridge_write_config(d, address, val, len);
+ pcie_cap_flr_write_config(d, address, val, len);
+ pcie_cap_slot_write_config(d, slt_ctl, slt_sta, address, val, len);
+ pcie_aer_write_config(d, address, val, len);
+
+ cxl_dsp_dvsec_write_config(d, address, val, len);
+}
+
+static void cxl_dsp_reset(DeviceState *qdev)
+{
+ PCIDevice *d = PCI_DEVICE(qdev);
+ CXLDownstreamPort *dsp = CXL_DSP(qdev);
+
+ pcie_cap_deverr_reset(d);
+ pcie_cap_slot_reset(d);
+ pcie_cap_arifwd_reset(d);
+ pci_bridge_reset(qdev);
+
+ latch_registers(dsp);
+}
+
+static void build_dvsecs(CXLComponentState *cxl)
+{
+ uint8_t *dvsec;
+
+ dvsec = (uint8_t *)&(CXLDVSECPortExtensions){ 0 };
+ cxl_component_create_dvsec(cxl, CXL2_DOWNSTREAM_PORT,
+ EXTENSIONS_PORT_DVSEC_LENGTH,
+ EXTENSIONS_PORT_DVSEC,
+ EXTENSIONS_PORT_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECPortFlexBus){
+ .cap = 0x27, /* Cache, IO, Mem, non-MLD */
+ .ctrl = 0x02, /* IO always enabled */
+ .status = 0x26, /* same */
+ .rcvd_mod_ts_data_phase1 = 0xef, /* WTF? */
+ };
+ cxl_component_create_dvsec(cxl, CXL2_DOWNSTREAM_PORT,
+ PCIE_FLEXBUS_PORT_DVSEC_LENGTH_2_0,
+ PCIE_FLEXBUS_PORT_DVSEC,
+ PCIE_FLEXBUS_PORT_DVSEC_REVID_2_0, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECPortGPF){
+ .rsvd = 0,
+ .phase1_ctrl = 1, /* 1μs timeout */
+ .phase2_ctrl = 1, /* 1μs timeout */
+ };
+ cxl_component_create_dvsec(cxl, CXL2_DOWNSTREAM_PORT,
+ GPF_PORT_DVSEC_LENGTH, GPF_PORT_DVSEC,
+ GPF_PORT_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){
+ .rsvd = 0,
+ .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX,
+ .reg0_base_hi = 0,
+ };
+ cxl_component_create_dvsec(cxl, CXL2_DOWNSTREAM_PORT,
+ REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC,
+ REG_LOC_DVSEC_REVID, dvsec);
+}
+
+static void cxl_dsp_realize(PCIDevice *d, Error **errp)
+{
+ PCIEPort *p = PCIE_PORT(d);
+ PCIESlot *s = PCIE_SLOT(d);
+ CXLDownstreamPort *dsp = CXL_DSP(d);
+ CXLComponentState *cxl_cstate = &dsp->cxl_cstate;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ MemoryRegion *component_bar = &cregs->component_registers;
+ int rc;
+
+ pci_bridge_initfn(d, TYPE_PCIE_BUS);
+ pcie_port_init_reg(d);
+
+ rc = msi_init(d, CXL_DOWNSTREAM_PORT_MSI_OFFSET,
+ CXL_DOWNSTREAM_PORT_MSI_NR_VECTOR,
+ true, true, errp);
+ if (rc) {
+ assert(rc == -ENOTSUP);
+ goto err_bridge;
+ }
+
+ rc = pcie_cap_init(d, CXL_DOWNSTREAM_PORT_EXP_OFFSET,
+ PCI_EXP_TYPE_DOWNSTREAM, p->port,
+ errp);
+ if (rc < 0) {
+ goto err_msi;
+ }
+
+ pcie_cap_flr_init(d);
+ pcie_cap_deverr_init(d);
+ pcie_cap_slot_init(d, s);
+ pcie_cap_arifwd_init(d);
+
+ pcie_chassis_create(s->chassis);
+ rc = pcie_chassis_add_slot(s);
+ if (rc < 0) {
+ error_setg(errp, "Can't add chassis slot, error %d", rc);
+ goto err_pcie_cap;
+ }
+
+ rc = pcie_aer_init(d, PCI_ERR_VER, CXL_DOWNSTREAM_PORT_AER_OFFSET,
+ PCI_ERR_SIZEOF, errp);
+ if (rc < 0) {
+ goto err_chassis;
+ }
+
+ cxl_cstate->dvsec_offset = CXL_DOWNSTREAM_PORT_DVSEC_OFFSET;
+ cxl_cstate->pdev = d;
+ build_dvsecs(cxl_cstate);
+ cxl_component_register_block_init(OBJECT(d), cxl_cstate, TYPE_CXL_DSP);
+ pci_register_bar(d, CXL_COMPONENT_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64,
+ component_bar);
+
+ return;
+
+ err_chassis:
+ pcie_chassis_del_slot(s);
+ err_pcie_cap:
+ pcie_cap_exit(d);
+ err_msi:
+ msi_uninit(d);
+ err_bridge:
+ pci_bridge_exitfn(d);
+}
+
+static void cxl_dsp_exitfn(PCIDevice *d)
+{
+ PCIESlot *s = PCIE_SLOT(d);
+
+ pcie_aer_exit(d);
+ pcie_chassis_del_slot(s);
+ pcie_cap_exit(d);
+ msi_uninit(d);
+ pci_bridge_exitfn(d);
+}
+
+static void cxl_dsp_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(oc);
+
+ k->is_bridge = true;
+ k->config_write = cxl_dsp_config_write;
+ k->realize = cxl_dsp_realize;
+ k->exit = cxl_dsp_exitfn;
+ k->vendor_id = 0x19e5; /* Huawei */
+ k->device_id = 0xa129; /* Emulated CXL Switch Downstream Port */
+ k->revision = 0;
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+ dc->desc = "CXL Switch Downstream Port";
+ dc->reset = cxl_dsp_reset;
+}
+
+static const TypeInfo cxl_dsp_info = {
+ .name = TYPE_CXL_DSP,
+ .instance_size = sizeof(CXLDownstreamPort),
+ .parent = TYPE_PCIE_SLOT,
+ .class_init = cxl_dsp_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_PCIE_DEVICE },
+ { INTERFACE_CXL_DEVICE },
+ { }
+ },
+};
+
+static void cxl_dsp_register_type(void)
+{
+ type_register_static(&cxl_dsp_info);
+}
+
+type_init(cxl_dsp_register_type);
diff --git a/hw/pci-bridge/meson.build b/hw/pci-bridge/meson.build
index 4a8c26b5a1..53cc53314a 100644
--- a/hw/pci-bridge/meson.build
+++ b/hw/pci-bridge/meson.build
@@ -5,7 +5,7 @@ pci_ss.add(when: 'CONFIG_IOH3420', if_true: files('ioh3420.c'))
pci_ss.add(when: 'CONFIG_PCIE_PORT', if_true: files('pcie_root_port.c', 'gen_pcie_root_port.c', 'pcie_pci_bridge.c'))
pci_ss.add(when: 'CONFIG_PXB', if_true: files('pci_expander_bridge.c'))
pci_ss.add(when: 'CONFIG_XIO3130', if_true: files('xio3130_upstream.c', 'xio3130_downstream.c'))
-pci_ss.add(when: 'CONFIG_CXL', if_true: files('cxl_root_port.c', 'cxl_upstream.c'))
+pci_ss.add(when: 'CONFIG_CXL', if_true: files('cxl_root_port.c', 'cxl_upstream.c', 'cxl_downstream.c'))
# NewWorld PowerMac
pci_ss.add(when: 'CONFIG_DEC_PCI', if_true: files('dec.c'))
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH v10 45/45] docs/cxl: Add switch documentation
2022-04-29 14:40 ` Jonathan Cameron via
@ 2022-04-29 14:41 ` Jonathan Cameron via
-1 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Switches were already introduced, but now we support them update
the documentation to provide an example in diagram and
qemu command line parameter forms.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
docs/system/devices/cxl.rst | 88 ++++++++++++++++++++++++++++++++++++-
1 file changed, 86 insertions(+), 2 deletions(-)
diff --git a/docs/system/devices/cxl.rst b/docs/system/devices/cxl.rst
index 9293cbf01a..abf7c1f243 100644
--- a/docs/system/devices/cxl.rst
+++ b/docs/system/devices/cxl.rst
@@ -118,8 +118,6 @@ and associated component register access via PCI bars.
CXL Switch
~~~~~~~~~~
-Not yet implemented in QEMU.
-
Here we consider a simple CXL switch with only a single
virtual hierarchy. Whilst more complex devices exist, their
visibility to a particular host is generally the same as for
@@ -137,6 +135,10 @@ BARs. The Upstream Port has the configuration interfaces for
the HDM decoders which route incoming memory accesses to the
appropriate downstream port.
+A CXL switch is created in a similar fashion to PCI switches
+by creating an upstream port (cxl-upstream) and a number of
+downstream ports on the internal switch bus (cxl-downstream).
+
CXL Memory Devices - Type 3
~~~~~~~~~~~~~~~~~~~~~~~~~~~
CXL type 3 devices use a PCI class code and are intended to be supported
@@ -240,6 +242,62 @@ Notes:
they will take the Host Physical Addresses of accesses and map
them to their own local Device Physical Address Space (DPA).
+Example topology involving a switch::
+
+ |<------------------SYSTEM PHYSICAL ADDRESS MAP (1)----------------->|
+ | __________ __________________________________ __________ |
+ | | | | | | | |
+ | | CFMW 0 | | CXL Fixed Memory Window 1 | | CFMW 1 | |
+ | | HB0 only | | Configured to interleave memory | | HB1 only | |
+ | | | | memory accesses across HB0/HB1 | | | |
+ | |____x_____| |__________________________________| |__________| |
+ | | | |
+ | | | |
+ | | |
+ Interleave Decoder | | |
+ Matches this HB | | |
+ \_____________| |_____________/
+ __________|__________ _____|_______________
+ | | | |
+ | CXL HB 0 | | CXL HB 1 |
+ | HB IntLv Decoders | | HB IntLv Decoders |
+ | PCI/CXL Root Bus 0c | | PCI/CXL Root Bus 0d |
+ | | | |
+ |___x_________________| |_____________________|
+ | | | |
+ |
+ A HB 0 HDM Decoder
+ matches this Port
+ ___________|___
+ | Root Port 0 |
+ | Appears in |
+ | PCI topology |
+ | As 0c:00.0 |
+ |___________x___|
+ |
+ |
+ \_____________________
+ |
+ |
+ ---------------------------------------------------
+ | Switch 0 USP as PCI 0d:00.0 |
+ | USP has HDM decoder which direct traffic to |
+ | appropiate downstream port |
+ | Switch BUS appears as 0e |
+ |x__________________________________________________|
+ | | | |
+ | | | |
+ _____|_________ ______|______ ______|_____ ______|_______
+ (4)| x | | | | | | |
+ | CXL Type3 0 | | CXL Type3 1 | | CXL type3 2| | CLX Type 3 3 |
+ | | | | | | | |
+ | PMEM0(Vol LSA)| | PMEM1 (...) | | PMEM2 (...)| | PMEM3 (...) |
+ | Decoder to go | | | | | | |
+ | from host PA | | PCI 10:00.0 | | PCI 11:00.0| | PCI 12:00.0 |
+ | to device PA | | | | | | |
+ | PCI as 0f:00.0| | | | | | |
+ |_______________| |_____________| |____________| |______________|
+
Example command lines
---------------------
A very simple setup with just one directly attached CXL Type 3 device::
@@ -279,6 +337,32 @@ the CXL Type3 device directly attached (no switches).::
-device cxl-type3,bus=root_port16,memdev=cxl-mem4,lsa=cxl-lsa4,id=cxl-pmem3 \
-cxl-fixed-memory-window targets.0=cxl.1,targets.1=cxl.2,size=4G,interleave-granularity=8k
+An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
+
+ qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+ ...
+ -object memory-backend-file,id=cxl-mem0,share=on,mem-path=/tmp/cxltest.raw,size=256M \
+ -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest1.raw,size=256M \
+ -object memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M \
+ -object memory-backend-file,id=cxl-mem3,share=on,mem-path=/tmp/cxltest3.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa0,share=on,mem-path=/tmp/lsa0.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa1.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa2,share=on,mem-path=/tmp/lsa2.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa3,share=on,mem-path=/tmp/lsa3.raw,size=256M \
+ -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+ -device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
+ -device cxl-rp,port=1,bus=cxl.1,id=root_port1,chassis=0,slot=1 \
+ -device cxl-upstream,bus=root_port0,id=us0 \
+ -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
+ -device cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0,size=256M \
+ -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
+ -device cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1,size=256M \
+ -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
+ -device cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2,size=256M \
+ -device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
+ -device cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3,size=256M \
+ -cxl-fixed-memory-window targets.0=cxl.1,size=4G,interleave-granularity=4k
+
Kernel Configuration Options
----------------------------
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread* [PATCH v10 45/45] docs/cxl: Add switch documentation
@ 2022-04-29 14:41 ` Jonathan Cameron via
0 siblings, 0 replies; 100+ messages in thread
From: Jonathan Cameron via @ 2022-04-29 14:41 UTC (permalink / raw)
To: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Michael S . Tsirkin, Igor Mammedov, Markus Armbruster,
Mark Cave-Ayland, Adam Manzanares, Tong Zhang
Cc: linux-cxl, Ben Widawsky, Peter Maydell,
Shameerali Kolothum Thodi, f4bug, Peter Xu, David Hildenbrand,
Paolo Bonzini, Saransh Gupta1, Shreyas Shah, Chris Browy,
Samarth Saxena, Dan Williams, k.jensen, dave, Alison Schofield
Switches were already introduced, but now we support them update
the documentation to provide an example in diagram and
qemu command line parameter forms.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
docs/system/devices/cxl.rst | 88 ++++++++++++++++++++++++++++++++++++-
1 file changed, 86 insertions(+), 2 deletions(-)
diff --git a/docs/system/devices/cxl.rst b/docs/system/devices/cxl.rst
index 9293cbf01a..abf7c1f243 100644
--- a/docs/system/devices/cxl.rst
+++ b/docs/system/devices/cxl.rst
@@ -118,8 +118,6 @@ and associated component register access via PCI bars.
CXL Switch
~~~~~~~~~~
-Not yet implemented in QEMU.
-
Here we consider a simple CXL switch with only a single
virtual hierarchy. Whilst more complex devices exist, their
visibility to a particular host is generally the same as for
@@ -137,6 +135,10 @@ BARs. The Upstream Port has the configuration interfaces for
the HDM decoders which route incoming memory accesses to the
appropriate downstream port.
+A CXL switch is created in a similar fashion to PCI switches
+by creating an upstream port (cxl-upstream) and a number of
+downstream ports on the internal switch bus (cxl-downstream).
+
CXL Memory Devices - Type 3
~~~~~~~~~~~~~~~~~~~~~~~~~~~
CXL type 3 devices use a PCI class code and are intended to be supported
@@ -240,6 +242,62 @@ Notes:
they will take the Host Physical Addresses of accesses and map
them to their own local Device Physical Address Space (DPA).
+Example topology involving a switch::
+
+ |<------------------SYSTEM PHYSICAL ADDRESS MAP (1)----------------->|
+ | __________ __________________________________ __________ |
+ | | | | | | | |
+ | | CFMW 0 | | CXL Fixed Memory Window 1 | | CFMW 1 | |
+ | | HB0 only | | Configured to interleave memory | | HB1 only | |
+ | | | | memory accesses across HB0/HB1 | | | |
+ | |____x_____| |__________________________________| |__________| |
+ | | | |
+ | | | |
+ | | |
+ Interleave Decoder | | |
+ Matches this HB | | |
+ \_____________| |_____________/
+ __________|__________ _____|_______________
+ | | | |
+ | CXL HB 0 | | CXL HB 1 |
+ | HB IntLv Decoders | | HB IntLv Decoders |
+ | PCI/CXL Root Bus 0c | | PCI/CXL Root Bus 0d |
+ | | | |
+ |___x_________________| |_____________________|
+ | | | |
+ |
+ A HB 0 HDM Decoder
+ matches this Port
+ ___________|___
+ | Root Port 0 |
+ | Appears in |
+ | PCI topology |
+ | As 0c:00.0 |
+ |___________x___|
+ |
+ |
+ \_____________________
+ |
+ |
+ ---------------------------------------------------
+ | Switch 0 USP as PCI 0d:00.0 |
+ | USP has HDM decoder which direct traffic to |
+ | appropiate downstream port |
+ | Switch BUS appears as 0e |
+ |x__________________________________________________|
+ | | | |
+ | | | |
+ _____|_________ ______|______ ______|_____ ______|_______
+ (4)| x | | | | | | |
+ | CXL Type3 0 | | CXL Type3 1 | | CXL type3 2| | CLX Type 3 3 |
+ | | | | | | | |
+ | PMEM0(Vol LSA)| | PMEM1 (...) | | PMEM2 (...)| | PMEM3 (...) |
+ | Decoder to go | | | | | | |
+ | from host PA | | PCI 10:00.0 | | PCI 11:00.0| | PCI 12:00.0 |
+ | to device PA | | | | | | |
+ | PCI as 0f:00.0| | | | | | |
+ |_______________| |_____________| |____________| |______________|
+
Example command lines
---------------------
A very simple setup with just one directly attached CXL Type 3 device::
@@ -279,6 +337,32 @@ the CXL Type3 device directly attached (no switches).::
-device cxl-type3,bus=root_port16,memdev=cxl-mem4,lsa=cxl-lsa4,id=cxl-pmem3 \
-cxl-fixed-memory-window targets.0=cxl.1,targets.1=cxl.2,size=4G,interleave-granularity=8k
+An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
+
+ qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+ ...
+ -object memory-backend-file,id=cxl-mem0,share=on,mem-path=/tmp/cxltest.raw,size=256M \
+ -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest1.raw,size=256M \
+ -object memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M \
+ -object memory-backend-file,id=cxl-mem3,share=on,mem-path=/tmp/cxltest3.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa0,share=on,mem-path=/tmp/lsa0.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa1.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa2,share=on,mem-path=/tmp/lsa2.raw,size=256M \
+ -object memory-backend-file,id=cxl-lsa3,share=on,mem-path=/tmp/lsa3.raw,size=256M \
+ -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+ -device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
+ -device cxl-rp,port=1,bus=cxl.1,id=root_port1,chassis=0,slot=1 \
+ -device cxl-upstream,bus=root_port0,id=us0 \
+ -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
+ -device cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0,size=256M \
+ -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
+ -device cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1,size=256M \
+ -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
+ -device cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2,size=256M \
+ -device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
+ -device cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3,size=256M \
+ -cxl-fixed-memory-window targets.0=cxl.1,size=4G,interleave-granularity=4k
+
Kernel Configuration Options
----------------------------
--
2.32.0
^ permalink raw reply related [flat|nested] 100+ messages in thread
* Re: [PATCH v10 00/45] CXl 2.0 emulation Support
2022-04-29 14:40 ` Jonathan Cameron via
` (45 preceding siblings ...)
(?)
@ 2022-05-13 10:16 ` Michael S. Tsirkin
-1 siblings, 0 replies; 100+ messages in thread
From: Michael S. Tsirkin @ 2022-05-13 10:16 UTC (permalink / raw)
To: Jonathan Cameron
Cc: linuxarm, qemu-devel, alex.bennee, Marcel Apfelbaum,
Igor Mammedov, Markus Armbruster, Mark Cave-Ayland,
Adam Manzanares, Tong Zhang, linux-cxl, Ben Widawsky,
Peter Maydell, Shameerali Kolothum Thodi, f4bug, Peter Xu,
David Hildenbrand, Paolo Bonzini, Saransh Gupta1, Shreyas Shah,
Chris Browy, Samarth Saxena, Dan Williams, k.jensen, dave,
Alison Schofield
On Fri, Apr 29, 2022 at 03:40:25PM +0100, Jonathan Cameron wrote:
> Note that due to a bug in the kernel handling of Mem_Enable
> in the CXL Device DVSEC a fix is needed to sucessfully use these
> patches with Linux.
> https://lore.kernel.org/linux-cxl/CAPcyv4gFWw9s6r9kUoL-_P9qnaZSJBMz+EcmfY+0g1NHrJQx7Q@mail.gmail.com/T/#t
>
> Note the issue was detected using this emulation.
>
> Changes since v9:
>
> Thanks to Tong Zhang and Markus Armbruster for review of v9.
> - Fixed return of all 1s on HDM decoder not matching.
> - Off by one error in an assert for register writes.
> - Write masks for both PCI config space structures and
> registers in MMIO space. These were partly queued up
> for a future patch set, but after review comment from
> Tong, I decided it was best to put these in place from
> the start. Note I was a bit undecided on whether to drop
> review tags for this (it's quit a bit of code, but very
> simple). Alex, and Adam if you want to take another look
> at patch 2 in particular that would be great.
> - Tag from Markus added.
> - Fix for wrong setting of Mem_Enable as described in the
> thread linked above.
>
> The series can be applied in parts if that makes sense:
>
> Possible partial sets:
> 1-15 (end with the test of the pxb-cxl host bridge)
> 16-22 (end with the test for root port and type3 device)
> 23-39 (end with tests on x86 pc for CFMWS including BIOS table updates)
> 40-41 (arm64 virt support + simple test case)
> 42 (documentation - we could pull this forwards to before the arm support)
> 43-45 (switch support)
OK, I picked up 1-39 and 42. Let's see how it goes, then arm
people can apply the arm bits.
I did my best with review but my knowledge is limited.
> gitlab tree at gitlab.com/jic23/qemu cxl-v10-draft-2
>
> As before that tree has additional patches on top that will form
> part of future postings. This time it has SPDM support via
> a socket connection to DMTF/spdm_emu / libspdm. I'll send an RFC
> on that topic as it's a discussion that can go on in parallel.
>
> Several people have asked about contributing additional features.
> As those come in I'll apply them on top of this series and handle
> rebases etc as necessary whilst we seek to get this first set
> of patches upstream.
>
> Updated background info:
>
> Looking in particular for:
> * Review of the PCI interactions
> * x86 and ARM machine interactions (particularly the memory maps)
> * Review of the interleaving approach - is the basic idea
> acceptable?
> * Review of the command line interface.
> * CXL related review welcome but much of that got reviewed
> in earlier versions and hasn't changed substantially.
>
> TODOs:
>
> * Volatile memory devices (easy but it's more code so left for now).
> * Hotplug? May not need much but it's not tested yet!
> * More tests and tighter verification that values written to hardware
> are actually valid - stuff that real hardware would check.
> * Testing, testing and more testing. I have been running a basic
> set of ARM and x86 tests on this, but there is always room for
> more tests and greater automation.
> * CFMWS flags as requested by Ben.
> * Parititioning support - ability to change the balance of volatile
> and non volatile memory on demand.
> * Trace points as suggested my Mark to help with debugging memory
> interleaving setup.
>
> Why do we want QEMU emulation of CXL?
>
> As Ben stated in V3, QEMU support has been critical to getting OS
> software written given lack of availability of hardware supporting the
> latest CXL features (coupled with very high demand for support being
> ready in a timely fashion). What has become clear since Ben's v3
> is that situation is a continuous one. Whilst we can't talk about
> them yet, CXL 3.0 features and OS support have been prototyped on
> top of this support and a lot of the ongoing kernel work is being
> tested against these patches. The kernel CXL mocking code allows
> some forms of testing, but QEMU provides a more versatile and
> extensible platform.
>
> Other features on the qemu-list that build on these include PCI-DOE
> /CDAT support from the Avery Design team further showing how this
> code is useful. Whilst not directly related this is also the test
> platform for work on PCI IDE/CMA + related DMTF SPDM as CXL both
> utilizes and extends those technologies and is likely to be an early
> adopter.
> Refs:
> CMA Kernel: https://lore.kernel.org/all/20210804161839.3492053-1-Jonathan.Cameron@huawei.com/
> CMA Qemu: https://lore.kernel.org/qemu-devel/1624665723-5169-1-git-send-email-cbrowy@avery-design.com/
> DOE Qemu: https://lore.kernel.org/qemu-devel/1623329999-15662-1-git-send-email-cbrowy@avery-design.com/
>
> As can be seen there is non trivial interaction with other areas of
> Qemu, particularly PCI and keeping this set up to date is proving
> a burden we'd rather do without :)
>
> Ben mentioned a few other good reasons in v3:
> https://lore.kernel.org/qemu-devel/20210202005948.241655-1-ben.widawsky@intel.com/
>
> What we have here is about what you need for it to be useful for testing
> currently kernel code. Note the kernel code is moving fast so
> since v4, some features have been introduced we don't yet support in
> QEMU (e.g. use of the PCIe serial number extended capability).
>
> All comments welcome.
>
> Additional info that was here in v5 is now in the documentation patch.
>
> Thanks,
>
> Jonathan
>
> Ben Widawsky (24):
> hw/pci/cxl: Add a CXL component type (interface)
> hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5)
> hw/cxl/device: Introduce a CXL device (8.2.8)
> hw/cxl/device: Implement the CAP array (8.2.8.1-2)
> hw/cxl/device: Implement basic mailbox (8.2.8.4)
> hw/cxl/device: Add memory device utilities
> hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1)
> hw/cxl/device: Timestamp implementation (8.2.9.3)
> hw/cxl/device: Add log commands (8.2.9.4) + CEL
> hw/pxb: Use a type for realizing expanders
> hw/pci/cxl: Create a CXL bus type
> hw/pxb: Allow creation of a CXL PXB (host bridge)
> hw/cxl/rp: Add a root port
> hw/cxl/device: Add a memory device (8.2.8.5)
> hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12)
> hw/cxl/device: Add some trivial commands
> hw/cxl/device: Plumb real Label Storage Area (LSA) sizing
> hw/cxl/device: Implement get/set Label Storage Area (LSA)
> hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142)
> acpi/cxl: Add _OSC implementation (9.14.2)
> acpi/cxl: Create the CEDT (9.14.1)
> acpi/cxl: Introduce CFMWS structures in CEDT
> hw/cxl/component Add a dumb HDM decoder handler
> qtest/cxl: Add more complex test cases with CFMWs
>
> Jonathan Cameron (21):
> MAINTAINERS: Add entry for Compute Express Link Emulation
> cxl: Machine level control on whether CXL support is enabled
> qtest/cxl: Introduce initial test for pxb-cxl only.
> qtests/cxl: Add initial root port and CXL type3 tests
> hw/cxl/component: Add utils for interleave parameter encoding/decoding
> hw/cxl/host: Add support for CXL Fixed Memory Windows.
> hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxl
> pci/pcie_port: Add pci_find_port_by_pn()
> CXL/cxl_component: Add cxl_get_hb_cstate()
> mem/cxl_type3: Add read and write functions for associated hostmem.
> cxl/cxl-host: Add memops for CFMWS region.
> i386/pc: Enable CXL fixed memory windows
> tests/acpi: q35: Allow addition of a CXL test.
> qtests/bios-tables-test: Add a test for CXL emulation.
> tests/acpi: Add tables for CXL emulation.
> hw/arm/virt: Basic CXL enablement on pci_expander_bridge instances
> pxb-cxl
> qtest/cxl: Add aarch64 virt test for CXL
> docs/cxl: Add initial Compute eXpress Link (CXL) documentation.
> pci-bridge/cxl_upstream: Add a CXL switch upstream port
> pci-bridge/cxl_downstream: Add a CXL switch downstream port
> docs/cxl: Add switch documentation
>
> MAINTAINERS | 7 +
> docs/system/device-emulation.rst | 1 +
> docs/system/devices/cxl.rst | 386 ++++++++++++++++++++++
> hw/Kconfig | 1 +
> hw/acpi/Kconfig | 5 +
> hw/acpi/cxl-stub.c | 12 +
> hw/acpi/cxl.c | 257 +++++++++++++++
> hw/acpi/meson.build | 4 +-
> hw/arm/Kconfig | 1 +
> hw/arm/virt-acpi-build.c | 33 ++
> hw/arm/virt.c | 40 ++-
> hw/core/machine.c | 28 ++
> hw/cxl/Kconfig | 3 +
> hw/cxl/cxl-component-utils.c | 396 +++++++++++++++++++++++
> hw/cxl/cxl-device-utils.c | 265 +++++++++++++++
> hw/cxl/cxl-host-stubs.c | 16 +
> hw/cxl/cxl-host.c | 261 +++++++++++++++
> hw/cxl/cxl-mailbox-utils.c | 478 ++++++++++++++++++++++++++++
> hw/cxl/meson.build | 12 +
> hw/i386/acpi-build.c | 57 +++-
> hw/i386/pc.c | 57 +++-
> hw/mem/Kconfig | 5 +
> hw/mem/cxl_type3.c | 371 +++++++++++++++++++++
> hw/mem/meson.build | 1 +
> hw/meson.build | 1 +
> hw/pci-bridge/Kconfig | 5 +
> hw/pci-bridge/cxl_downstream.c | 249 +++++++++++++++
> hw/pci-bridge/cxl_root_port.c | 236 ++++++++++++++
> hw/pci-bridge/cxl_upstream.c | 216 +++++++++++++
> hw/pci-bridge/meson.build | 1 +
> hw/pci-bridge/pci_expander_bridge.c | 168 +++++++++-
> hw/pci-bridge/pcie_root_port.c | 6 +-
> hw/pci-host/gpex-acpi.c | 20 +-
> hw/pci/pci.c | 21 +-
> hw/pci/pcie_port.c | 25 ++
> include/hw/acpi/cxl.h | 28 ++
> include/hw/arm/virt.h | 1 +
> include/hw/boards.h | 2 +
> include/hw/cxl/cxl.h | 65 ++++
> include/hw/cxl/cxl_component.h | 223 +++++++++++++
> include/hw/cxl/cxl_device.h | 268 ++++++++++++++++
> include/hw/cxl/cxl_pci.h | 167 ++++++++++
> include/hw/pci/pci.h | 14 +
> include/hw/pci/pci_bridge.h | 20 ++
> include/hw/pci/pci_bus.h | 7 +
> include/hw/pci/pci_ids.h | 1 +
> include/hw/pci/pcie_port.h | 2 +
> qapi/machine.json | 21 ++
> qemu-options.hx | 38 +++
> scripts/device-crash-test | 1 +
> softmmu/vl.c | 47 +++
> tests/data/acpi/q35/CEDT.cxl | Bin 0 -> 184 bytes
> tests/data/acpi/q35/DSDT.cxl | Bin 0 -> 9615 bytes
> tests/qtest/bios-tables-test.c | 44 +++
> tests/qtest/cxl-test.c | 181 +++++++++++
> tests/qtest/meson.build | 5 +
> 56 files changed, 4753 insertions(+), 27 deletions(-)
> create mode 100644 docs/system/devices/cxl.rst
> create mode 100644 hw/acpi/cxl-stub.c
> create mode 100644 hw/acpi/cxl.c
> create mode 100644 hw/cxl/Kconfig
> create mode 100644 hw/cxl/cxl-component-utils.c
> create mode 100644 hw/cxl/cxl-device-utils.c
> create mode 100644 hw/cxl/cxl-host-stubs.c
> create mode 100644 hw/cxl/cxl-host.c
> create mode 100644 hw/cxl/cxl-mailbox-utils.c
> create mode 100644 hw/cxl/meson.build
> create mode 100644 hw/mem/cxl_type3.c
> create mode 100644 hw/pci-bridge/cxl_downstream.c
> create mode 100644 hw/pci-bridge/cxl_root_port.c
> create mode 100644 hw/pci-bridge/cxl_upstream.c
> create mode 100644 include/hw/acpi/cxl.h
> create mode 100644 include/hw/cxl/cxl.h
> create mode 100644 include/hw/cxl/cxl_component.h
> create mode 100644 include/hw/cxl/cxl_device.h
> create mode 100644 include/hw/cxl/cxl_pci.h
> create mode 100644 tests/data/acpi/q35/CEDT.cxl
> create mode 100644 tests/data/acpi/q35/DSDT.cxl
> create mode 100644 tests/qtest/cxl-test.c
>
> --
> 2.32.0
^ permalink raw reply [flat|nested] 100+ messages in thread