From: Eugen Hristev <eugen.hristev@microchip.com> To: <linux-arm-kernel@lists.infradead.org>, <linux-media@vger.kernel.org>, <hverkuil@xs4all.nl> Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <claudiu.beznea@microchip.com>, <nicolas.ferre@microchip.com>, <jacopo@jmondi.org>, Eugen Hristev <eugen.hristev@microchip.com> Subject: [PATCH v10 0/5] media: atmel: atmel-isc: implement media controller Date: Tue, 3 May 2022 12:51:22 +0300 [thread overview] Message-ID: <20220503095127.48710-1-eugen.hristev@microchip.com> (raw) This series is a split from the series : [PATCH v9 00/13] media: atmel: atmel-isc: implement media controller and it includes the media controller part. previous fixes were sent on a different patch series. As discussed on the ML, moving forward with having the media link validate at start/stop streaming call. I will test the patch : [RFC PATCHv2] vb2: add support for (un)prepare_streaming queue ops afterwards, but that patch requires moving my logic to the new vb2 callbacks. Full series history: Changes in v10: -> split the series into this first fixes part. -> moved IO_MC addition from first patch to the second patch on the driver changes -> edited commit messages -> DT nodes now disabled by default. Changes in v9: -> kernel robot reported isc_link_validate is not static, changed to static. Changes in v8: -> scaler: modified crop bounds to have the exact source size Changes in v7: -> scaler: modified crop bounds to have maximum isc size -> format propagation: did small changes as per Jacopo review Changes in v6: -> worked a bit on scaler, added try crop and other changes as per Jacopo review -> worked on isc-base enum_fmt , reworked as per Jacopo review Changes in v5: -> removed patch that removed the 'stop' variable as it was still required -> added two new trivial patches -> reworked some parts of the scaler and format propagation after discussions with Jacopo Changes in v4: -> as reviewed by Hans, added new patch to remove the 'stop' variable and reworked one patch that was using it -> as reviewed by Jacopo, reworked some parts of the media controller implementation Changes in v3: - change in bindings, small fixes in csi2dc driver and conversion to mc for the isc-base. - removed some MAINTAINERS patches and used patterns in MAINTAINERS Changes in v2: - integrated many changes suggested by Jacopo in the review of the v1 series. - add a few new patches Eugen Hristev (5): media: atmel: atmel-isc: prepare for media controller support media: atmel: atmel-isc: implement media controller ARM: dts: at91: sama7g5: add nodes for video capture ARM: configs: at91: sama7: add xisc and csi2dc ARM: multi_v7_defconfig: add atmel video pipeline modules arch/arm/boot/dts/sama7g5.dtsi | 51 ++ arch/arm/configs/multi_v7_defconfig | 3 + arch/arm/configs/sama7_defconfig | 2 + drivers/media/platform/atmel/Makefile | 2 +- drivers/media/platform/atmel/atmel-isc-base.c | 485 +++++++++--------- .../media/platform/atmel/atmel-isc-scaler.c | 267 ++++++++++ drivers/media/platform/atmel/atmel-isc.h | 50 +- .../media/platform/atmel/atmel-sama5d2-isc.c | 34 +- .../media/platform/atmel/atmel-sama7g5-isc.c | 32 +- 9 files changed, 685 insertions(+), 241 deletions(-) create mode 100644 drivers/media/platform/atmel/atmel-isc-scaler.c -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Eugen Hristev <eugen.hristev@microchip.com> To: <linux-arm-kernel@lists.infradead.org>, <linux-media@vger.kernel.org>, <hverkuil@xs4all.nl> Cc: devicetree@vger.kernel.org, jacopo@jmondi.org, linux-kernel@vger.kernel.org, Eugen Hristev <eugen.hristev@microchip.com>, claudiu.beznea@microchip.com Subject: [PATCH v10 0/5] media: atmel: atmel-isc: implement media controller Date: Tue, 3 May 2022 12:51:22 +0300 [thread overview] Message-ID: <20220503095127.48710-1-eugen.hristev@microchip.com> (raw) This series is a split from the series : [PATCH v9 00/13] media: atmel: atmel-isc: implement media controller and it includes the media controller part. previous fixes were sent on a different patch series. As discussed on the ML, moving forward with having the media link validate at start/stop streaming call. I will test the patch : [RFC PATCHv2] vb2: add support for (un)prepare_streaming queue ops afterwards, but that patch requires moving my logic to the new vb2 callbacks. Full series history: Changes in v10: -> split the series into this first fixes part. -> moved IO_MC addition from first patch to the second patch on the driver changes -> edited commit messages -> DT nodes now disabled by default. Changes in v9: -> kernel robot reported isc_link_validate is not static, changed to static. Changes in v8: -> scaler: modified crop bounds to have the exact source size Changes in v7: -> scaler: modified crop bounds to have maximum isc size -> format propagation: did small changes as per Jacopo review Changes in v6: -> worked a bit on scaler, added try crop and other changes as per Jacopo review -> worked on isc-base enum_fmt , reworked as per Jacopo review Changes in v5: -> removed patch that removed the 'stop' variable as it was still required -> added two new trivial patches -> reworked some parts of the scaler and format propagation after discussions with Jacopo Changes in v4: -> as reviewed by Hans, added new patch to remove the 'stop' variable and reworked one patch that was using it -> as reviewed by Jacopo, reworked some parts of the media controller implementation Changes in v3: - change in bindings, small fixes in csi2dc driver and conversion to mc for the isc-base. - removed some MAINTAINERS patches and used patterns in MAINTAINERS Changes in v2: - integrated many changes suggested by Jacopo in the review of the v1 series. - add a few new patches Eugen Hristev (5): media: atmel: atmel-isc: prepare for media controller support media: atmel: atmel-isc: implement media controller ARM: dts: at91: sama7g5: add nodes for video capture ARM: configs: at91: sama7: add xisc and csi2dc ARM: multi_v7_defconfig: add atmel video pipeline modules arch/arm/boot/dts/sama7g5.dtsi | 51 ++ arch/arm/configs/multi_v7_defconfig | 3 + arch/arm/configs/sama7_defconfig | 2 + drivers/media/platform/atmel/Makefile | 2 +- drivers/media/platform/atmel/atmel-isc-base.c | 485 +++++++++--------- .../media/platform/atmel/atmel-isc-scaler.c | 267 ++++++++++ drivers/media/platform/atmel/atmel-isc.h | 50 +- .../media/platform/atmel/atmel-sama5d2-isc.c | 34 +- .../media/platform/atmel/atmel-sama7g5-isc.c | 32 +- 9 files changed, 685 insertions(+), 241 deletions(-) create mode 100644 drivers/media/platform/atmel/atmel-isc-scaler.c -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-05-03 9:52 UTC|newest] Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-03 9:51 Eugen Hristev [this message] 2022-05-03 9:51 ` [PATCH v10 0/5] media: atmel: atmel-isc: implement media controller Eugen Hristev 2022-05-03 9:51 ` [PATCH v10 1/5] media: atmel: atmel-isc: prepare for media controller support Eugen Hristev 2022-05-03 9:51 ` Eugen Hristev 2022-05-03 9:51 ` [PATCH v10 2/5] media: atmel: atmel-isc: implement media controller Eugen Hristev 2022-05-03 9:51 ` Eugen Hristev 2022-05-03 9:51 ` [PATCH v10 3/5] ARM: dts: at91: sama7g5: add nodes for video capture Eugen Hristev 2022-05-03 9:51 ` Eugen Hristev 2022-12-14 12:55 ` Eugen.Hristev 2022-12-14 12:55 ` Eugen.Hristev 2022-12-14 14:47 ` Claudiu.Beznea 2022-12-14 14:47 ` Claudiu.Beznea 2023-01-12 9:18 ` Claudiu.Beznea 2023-01-12 9:18 ` Claudiu.Beznea 2022-05-03 9:51 ` [PATCH v10 4/5] ARM: configs: at91: sama7: add xisc and csi2dc Eugen Hristev 2022-05-03 9:51 ` Eugen Hristev 2022-05-05 13:30 ` Nicolas Ferre 2022-05-05 13:30 ` Nicolas Ferre 2022-05-03 9:51 ` [PATCH v10 5/5] ARM: multi_v7_defconfig: add atmel video pipeline modules Eugen Hristev 2022-05-03 9:51 ` Eugen Hristev 2022-05-05 15:17 ` Nicolas Ferre 2022-05-05 15:17 ` Nicolas Ferre 2022-06-15 11:06 ` [PATCH v10 0/5] media: atmel: atmel-isc: implement media controller Eugen.Hristev 2022-06-15 11:06 ` Eugen.Hristev 2022-06-21 12:22 ` Hans Verkuil 2022-06-21 12:22 ` Hans Verkuil 2022-06-22 11:53 ` Hans Verkuil 2022-06-22 11:53 ` Hans Verkuil 2022-06-22 12:25 ` Eugen.Hristev 2022-06-22 12:25 ` Eugen.Hristev 2022-06-22 12:42 ` Eugen.Hristev 2022-06-22 12:42 ` Eugen.Hristev 2022-06-22 13:47 ` Hans Verkuil 2022-06-22 13:47 ` Hans Verkuil 2022-06-22 14:09 ` Eugen.Hristev 2022-06-22 14:09 ` Eugen.Hristev 2022-06-22 14:14 ` Jacopo Mondi 2022-06-22 14:14 ` Jacopo Mondi 2022-06-22 14:23 ` Eugen.Hristev 2022-06-22 14:23 ` Eugen.Hristev 2022-06-22 14:55 ` Hans Verkuil 2022-06-22 14:55 ` Hans Verkuil 2022-06-22 15:46 ` Jacopo Mondi 2022-06-22 15:46 ` Jacopo Mondi 2022-06-23 8:39 ` Eugen.Hristev 2022-06-23 8:39 ` Eugen.Hristev 2022-06-23 9:19 ` Jacopo Mondi 2022-06-23 9:19 ` Jacopo Mondi 2022-06-23 9:24 ` Hans Verkuil 2022-06-23 9:24 ` Hans Verkuil 2022-06-22 13:35 ` Hans Verkuil 2022-06-22 13:35 ` Hans Verkuil 2022-06-22 13:52 ` Eugen.Hristev 2022-06-22 13:52 ` Eugen.Hristev
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220503095127.48710-1-eugen.hristev@microchip.com \ --to=eugen.hristev@microchip.com \ --cc=claudiu.beznea@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=hverkuil@xs4all.nl \ --cc=jacopo@jmondi.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=nicolas.ferre@microchip.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.