From: Eugen Hristev <eugen.hristev@microchip.com> To: <linux-arm-kernel@lists.infradead.org>, <linux-media@vger.kernel.org>, <hverkuil@xs4all.nl> Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <claudiu.beznea@microchip.com>, <nicolas.ferre@microchip.com>, <jacopo@jmondi.org>, Eugen Hristev <eugen.hristev@microchip.com> Subject: [PATCH v10 3/5] ARM: dts: at91: sama7g5: add nodes for video capture Date: Tue, 3 May 2022 12:51:25 +0300 [thread overview] Message-ID: <20220503095127.48710-4-eugen.hristev@microchip.com> (raw) In-Reply-To: <20220503095127.48710-1-eugen.hristev@microchip.com> Add node for the XISC (eXtended Image Sensor Controller) and CSI2DC (csi2 demux controller). These nodes represent the top level of the video capture hardware pipeline and are directly connected in hardware. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> --- Changes in v10: - nodes disabled by default arch/arm/boot/dts/sama7g5.dtsi | 51 ++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 4decd3a91a76..fe9c6df9819b 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -454,6 +454,57 @@ sdmmc2: mmc@e120c000 { status = "disabled"; }; + csi2dc: csi2dc@e1404000 { + compatible = "microchip,sama7g5-csi2dc"; + reg = <0xe1404000 0x500>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>; + clock-names = "pclk", "scck"; + assigned-clocks = <&xisc>; + assigned-clock-rates = <266000000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csi2dc_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + csi2dc_out: endpoint { + bus-width = <14>; + hsync-active = <1>; + vsync-active = <1>; + remote-endpoint = <&xisc_in>; + }; + }; + }; + }; + + xisc: xisc@e1408000 { + compatible = "microchip,sama7g5-isc"; + reg = <0xe1408000 0x2000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>; + clock-names = "hclock"; + #clock-cells = <0>; + clock-output-names = "isc-mck"; + status = "disabled"; + + port { + xisc_in: endpoint { + bus-type = <5>; /* Parallel */ + bus-width = <14>; + hsync-active = <1>; + vsync-active = <1>; + remote-endpoint = <&csi2dc_out>; + }; + }; + }; + pwm: pwm@e1604000 { compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm"; reg = <0xe1604000 0x4000>; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Eugen Hristev <eugen.hristev@microchip.com> To: <linux-arm-kernel@lists.infradead.org>, <linux-media@vger.kernel.org>, <hverkuil@xs4all.nl> Cc: devicetree@vger.kernel.org, jacopo@jmondi.org, linux-kernel@vger.kernel.org, Eugen Hristev <eugen.hristev@microchip.com>, claudiu.beznea@microchip.com Subject: [PATCH v10 3/5] ARM: dts: at91: sama7g5: add nodes for video capture Date: Tue, 3 May 2022 12:51:25 +0300 [thread overview] Message-ID: <20220503095127.48710-4-eugen.hristev@microchip.com> (raw) In-Reply-To: <20220503095127.48710-1-eugen.hristev@microchip.com> Add node for the XISC (eXtended Image Sensor Controller) and CSI2DC (csi2 demux controller). These nodes represent the top level of the video capture hardware pipeline and are directly connected in hardware. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> --- Changes in v10: - nodes disabled by default arch/arm/boot/dts/sama7g5.dtsi | 51 ++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 4decd3a91a76..fe9c6df9819b 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -454,6 +454,57 @@ sdmmc2: mmc@e120c000 { status = "disabled"; }; + csi2dc: csi2dc@e1404000 { + compatible = "microchip,sama7g5-csi2dc"; + reg = <0xe1404000 0x500>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>; + clock-names = "pclk", "scck"; + assigned-clocks = <&xisc>; + assigned-clock-rates = <266000000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csi2dc_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + csi2dc_out: endpoint { + bus-width = <14>; + hsync-active = <1>; + vsync-active = <1>; + remote-endpoint = <&xisc_in>; + }; + }; + }; + }; + + xisc: xisc@e1408000 { + compatible = "microchip,sama7g5-isc"; + reg = <0xe1408000 0x2000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>; + clock-names = "hclock"; + #clock-cells = <0>; + clock-output-names = "isc-mck"; + status = "disabled"; + + port { + xisc_in: endpoint { + bus-type = <5>; /* Parallel */ + bus-width = <14>; + hsync-active = <1>; + vsync-active = <1>; + remote-endpoint = <&csi2dc_out>; + }; + }; + }; + pwm: pwm@e1604000 { compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm"; reg = <0xe1604000 0x4000>; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-05-03 9:52 UTC|newest] Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-03 9:51 [PATCH v10 0/5] media: atmel: atmel-isc: implement media controller Eugen Hristev 2022-05-03 9:51 ` Eugen Hristev 2022-05-03 9:51 ` [PATCH v10 1/5] media: atmel: atmel-isc: prepare for media controller support Eugen Hristev 2022-05-03 9:51 ` Eugen Hristev 2022-05-03 9:51 ` [PATCH v10 2/5] media: atmel: atmel-isc: implement media controller Eugen Hristev 2022-05-03 9:51 ` Eugen Hristev 2022-05-03 9:51 ` Eugen Hristev [this message] 2022-05-03 9:51 ` [PATCH v10 3/5] ARM: dts: at91: sama7g5: add nodes for video capture Eugen Hristev 2022-12-14 12:55 ` Eugen.Hristev 2022-12-14 12:55 ` Eugen.Hristev 2022-12-14 14:47 ` Claudiu.Beznea 2022-12-14 14:47 ` Claudiu.Beznea 2023-01-12 9:18 ` Claudiu.Beznea 2023-01-12 9:18 ` Claudiu.Beznea 2022-05-03 9:51 ` [PATCH v10 4/5] ARM: configs: at91: sama7: add xisc and csi2dc Eugen Hristev 2022-05-03 9:51 ` Eugen Hristev 2022-05-05 13:30 ` Nicolas Ferre 2022-05-05 13:30 ` Nicolas Ferre 2022-05-03 9:51 ` [PATCH v10 5/5] ARM: multi_v7_defconfig: add atmel video pipeline modules Eugen Hristev 2022-05-03 9:51 ` Eugen Hristev 2022-05-05 15:17 ` Nicolas Ferre 2022-05-05 15:17 ` Nicolas Ferre 2022-06-15 11:06 ` [PATCH v10 0/5] media: atmel: atmel-isc: implement media controller Eugen.Hristev 2022-06-15 11:06 ` Eugen.Hristev 2022-06-21 12:22 ` Hans Verkuil 2022-06-21 12:22 ` Hans Verkuil 2022-06-22 11:53 ` Hans Verkuil 2022-06-22 11:53 ` Hans Verkuil 2022-06-22 12:25 ` Eugen.Hristev 2022-06-22 12:25 ` Eugen.Hristev 2022-06-22 12:42 ` Eugen.Hristev 2022-06-22 12:42 ` Eugen.Hristev 2022-06-22 13:47 ` Hans Verkuil 2022-06-22 13:47 ` Hans Verkuil 2022-06-22 14:09 ` Eugen.Hristev 2022-06-22 14:09 ` Eugen.Hristev 2022-06-22 14:14 ` Jacopo Mondi 2022-06-22 14:14 ` Jacopo Mondi 2022-06-22 14:23 ` Eugen.Hristev 2022-06-22 14:23 ` Eugen.Hristev 2022-06-22 14:55 ` Hans Verkuil 2022-06-22 14:55 ` Hans Verkuil 2022-06-22 15:46 ` Jacopo Mondi 2022-06-22 15:46 ` Jacopo Mondi 2022-06-23 8:39 ` Eugen.Hristev 2022-06-23 8:39 ` Eugen.Hristev 2022-06-23 9:19 ` Jacopo Mondi 2022-06-23 9:19 ` Jacopo Mondi 2022-06-23 9:24 ` Hans Verkuil 2022-06-23 9:24 ` Hans Verkuil 2022-06-22 13:35 ` Hans Verkuil 2022-06-22 13:35 ` Hans Verkuil 2022-06-22 13:52 ` Eugen.Hristev 2022-06-22 13:52 ` Eugen.Hristev
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220503095127.48710-4-eugen.hristev@microchip.com \ --to=eugen.hristev@microchip.com \ --cc=claudiu.beznea@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=hverkuil@xs4all.nl \ --cc=jacopo@jmondi.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=nicolas.ferre@microchip.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.