* [PATCH 0/2] dt-bindings: Arm CoreSight binding schema conversions
@ 2022-05-20 21:44 ` Rob Herring
0 siblings, 0 replies; 18+ messages in thread
From: Rob Herring @ 2022-05-20 21:44 UTC (permalink / raw)
To: Mathieu Poirier, Mike Leach, Leo Yan, Suzuki K Poulose,
Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-arm-kernel
This series converts all the CoreSight debug bindings to DT schema
format. These bindings are at the top of the list of occurrences of
bindings without a schema. For arm64 dts files:
702 ['arm,coresight-etm4x', 'arm,primecell']
536 ['arm,coresight-cpu-debug', 'arm,primecell']
509 ['arm,coresight-dynamic-funnel', 'arm,primecell']
213 ['arm,coresight-tmc', 'arm,primecell']
143 ['arm,coresight-dynamic-replicator', 'arm,primecell']
97 ['arm,coresight-stm', 'arm,primecell']
I'll send a reply to these with the errors in dts files that this
causes. I've reviewed them and they all look legit. Xilinx Zynq though
has 3 clocks instead of 2.
Rob
Rob Herring (2):
dt-bindings: arm: Convert CoreSight bindings to DT schema
dt-bindings: arm: Convert CoreSight CPU debug to DT schema
.../bindings/arm/arm,coresight-catu.yaml | 101 +++++
.../bindings/arm/arm,coresight-cpu-debug.yaml | 81 ++++
.../arm/arm,coresight-dynamic-funnel.yaml | 126 ++++++
.../bindings/arm/arm,coresight-etb10.yaml | 92 ++++
.../bindings/arm/arm,coresight-etm.yaml | 156 +++++++
.../arm/arm,coresight-static-replicator.yaml | 90 ++++
.../bindings/arm/arm,coresight-stm.yaml | 101 +++++
.../bindings/arm/arm,coresight-tmc.yaml | 132 ++++++
.../bindings/arm/arm,coresight-tpiu.yaml | 91 ++++
.../bindings/arm/coresight-cpu-debug.txt | 49 ---
.../devicetree/bindings/arm/coresight.txt | 402 ------------------
11 files changed, 970 insertions(+), 451 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
delete mode 100644 Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
delete mode 100644 Documentation/devicetree/bindings/arm/coresight.txt
--
2.34.1
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 0/2] dt-bindings: Arm CoreSight binding schema conversions @ 2022-05-20 21:44 ` Rob Herring 0 siblings, 0 replies; 18+ messages in thread From: Rob Herring @ 2022-05-20 21:44 UTC (permalink / raw) To: Mathieu Poirier, Mike Leach, Leo Yan, Suzuki K Poulose, Krzysztof Kozlowski Cc: devicetree, linux-kernel, linux-arm-kernel This series converts all the CoreSight debug bindings to DT schema format. These bindings are at the top of the list of occurrences of bindings without a schema. For arm64 dts files: 702 ['arm,coresight-etm4x', 'arm,primecell'] 536 ['arm,coresight-cpu-debug', 'arm,primecell'] 509 ['arm,coresight-dynamic-funnel', 'arm,primecell'] 213 ['arm,coresight-tmc', 'arm,primecell'] 143 ['arm,coresight-dynamic-replicator', 'arm,primecell'] 97 ['arm,coresight-stm', 'arm,primecell'] I'll send a reply to these with the errors in dts files that this causes. I've reviewed them and they all look legit. Xilinx Zynq though has 3 clocks instead of 2. Rob Rob Herring (2): dt-bindings: arm: Convert CoreSight bindings to DT schema dt-bindings: arm: Convert CoreSight CPU debug to DT schema .../bindings/arm/arm,coresight-catu.yaml | 101 +++++ .../bindings/arm/arm,coresight-cpu-debug.yaml | 81 ++++ .../arm/arm,coresight-dynamic-funnel.yaml | 126 ++++++ .../bindings/arm/arm,coresight-etb10.yaml | 92 ++++ .../bindings/arm/arm,coresight-etm.yaml | 156 +++++++ .../arm/arm,coresight-static-replicator.yaml | 90 ++++ .../bindings/arm/arm,coresight-stm.yaml | 101 +++++ .../bindings/arm/arm,coresight-tmc.yaml | 132 ++++++ .../bindings/arm/arm,coresight-tpiu.yaml | 91 ++++ .../bindings/arm/coresight-cpu-debug.txt | 49 --- .../devicetree/bindings/arm/coresight.txt | 402 ------------------ 11 files changed, 970 insertions(+), 451 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml delete mode 100644 Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt delete mode 100644 Documentation/devicetree/bindings/arm/coresight.txt -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/2] dt-bindings: arm: Convert CoreSight bindings to DT schema 2022-05-20 21:44 ` Rob Herring @ 2022-05-20 21:44 ` Rob Herring -1 siblings, 0 replies; 18+ messages in thread From: Rob Herring @ 2022-05-20 21:44 UTC (permalink / raw) To: Mathieu Poirier, Mike Leach, Leo Yan, Suzuki K Poulose, Krzysztof Kozlowski Cc: devicetree, linux-kernel, linux-arm-kernel Each CoreSight component has slightly different requirements and nothing applies to every component, so each CoreSight component has its own schema document. Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/arm/arm,coresight-catu.yaml | 101 +++++ .../arm/arm,coresight-dynamic-funnel.yaml | 126 ++++++ .../bindings/arm/arm,coresight-etb10.yaml | 92 ++++ .../bindings/arm/arm,coresight-etm.yaml | 156 +++++++ .../arm/arm,coresight-static-replicator.yaml | 90 ++++ .../bindings/arm/arm,coresight-stm.yaml | 101 +++++ .../bindings/arm/arm,coresight-tmc.yaml | 132 ++++++ .../bindings/arm/arm,coresight-tpiu.yaml | 91 ++++ .../devicetree/bindings/arm/coresight.txt | 402 ------------------ 9 files changed, 889 insertions(+), 402 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml delete mode 100644 Documentation/devicetree/bindings/arm/coresight.txt diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml new file mode 100644 index 000000000000..d783d9276124 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-catu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Coresight Address Translation Unit (CATU) + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The CoreSight Address Translation Unit (CATU) translates addresses between an + AXI master and system memory. The CATU is normally used along with the TMC to + implement scattering of virtual trace buffers in physical memory. The CATU + translates contiguous Virtual Addresses (VAs) from an AXI master into + non-contiguous Physical Addresses (PAs) that are intended for system memory. + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + const: arm,coresight-catu + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-catu + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + interrupts: + maxItems: 1 + description: Address translation error interrupt + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: AXI Slave connected to another Coresight component + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - in-ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + catu@207e0000 { + compatible = "arm,coresight-catu", "arm,primecell"; + reg = <0x207e0000 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + in-ports { + port { + catu_in_port: endpoint { + remote-endpoint = <&etr_out_port>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml new file mode 100644 index 000000000000..1eeedc22857c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-funnel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight Programmable Trace Bus Funnel + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The Coresight funnel merges 2-8 trace sources into a single trace + stream with programmable enable and priority of input ports. + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + const: arm,coresight-dynamic-funnel + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-dynamic-funnel + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + '^port(@[0-7])?$': + description: Input connections from CoreSight Trace bus + $ref: /schemas/graph.yaml#/properties/port + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Output connection to CoreSight Trace bus + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - in-ports + - out-ports + +unevaluatedProperties: false + +examples: + - | + funnel@20040000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x20040000 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + out-ports { + port { + funnel_out_port0: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_in_port0: endpoint { + remote-endpoint = <&ptm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + funnel_in_port1: endpoint { + remote-endpoint = <&ptm1_out_port>; + }; + }; + + port@2 { + reg = <2>; + funnel_in_port2: endpoint { + remote-endpoint = <&etm0_out_port>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml new file mode 100644 index 000000000000..fd06ede26ceb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-etb10.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight Embedded Trace Buffer + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The CoreSight Embedded Trace Buffer stores traces in a dedicated SRAM that is + used as a circular buffer. + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + const: arm,coresight-etb10 + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-etb10 + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Input connection from CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - in-ports + +unevaluatedProperties: false + +examples: + - | + etb@20010000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0x20010000 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + in-ports { + port { + etb_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml new file mode 100644 index 000000000000..e0377ce48537 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-etm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight Embedded Trace MacroCell + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The Embedded Trace Macrocell (ETM) is a real-time trace module providing + instruction and data tracing of a processor. + +select: + properties: + compatible: + contains: + enum: + - arm,coresight-etm3x + - arm,coresight-etm4x + - arm,coresight-etm4x-sysreg + required: + - compatible + +allOf: + - if: + not: + properties: + compatible: + contains: + const: arm,coresight-etm4x-sysreg + then: + $ref: /schemas/arm/primecell.yaml# + required: + - reg + +properties: + compatible: + oneOf: + - description: + Embedded Trace Macrocell with memory mapped access. + items: + - enum: + - arm,coresight-etm3x + - arm,coresight-etm4x + - const: arm,primecell + - description: + Embedded Trace Macrocell (version 4.x), with system register access only + const: arm,coresight-etm4x-sysreg + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + arm,coresight-loses-context-with-cpu: + type: boolean + description: + Indicates that the hardware will lose register context on CPU power down + (e.g. CPUIdle). An example of where this may be needed are systems which + contain a coresight component and CPU in the same power domain. When the + CPU powers down the coresight component also powers down and loses its + context. + + arm,cp14: + type: boolean + description: + Must be present if the system accesses ETM/PTM management registers via + co-processor 14. + + qcom,skip-power-up: + type: boolean + description: + Indicates that an implementation can skip powering up the trace unit. + TRCPDCR.PU does not have to be set on Qualcomm Technologies Inc. systems + since ETMs are in the same power domain as their CPU cores. This property + is required to identify such systems with hardware errata where the CPU + watchdog counter is stopped when TRCPDCR.PU is set. + + cpu: + description: + phandle to the cpu this ETM is bound to. + $ref: /schemas/types.yaml#/definitions/phandle + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Output connection from the ETM to CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - clocks + - clock-names + - cpu + - out-ports + +unevaluatedProperties: false + +examples: + - | + ptm@2201c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x2201c000 0x1000>; + + cpu = <&cpu0>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; + }; + }; + }; + + ptm@2201d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x2201d000 0x1000>; + + cpu = <&cpu1>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml new file mode 100644 index 000000000000..66ee97370fb2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-static-replicator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight Static Trace Bus Replicator + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The Coresight replicator splits a single trace stream into two trace streams + for systems that have more than one trace sink component. + +properties: + compatible: + const: arm,coresight-static-replicator + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Input connection from CoreSight Trace bus + $ref: /schemas/graph.yaml#/properties/port + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + '^port@[01]$': + description: Output connections to CoreSight Trace bus + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - in-ports + - out-ports + +additionalProperties: false + +examples: + - | + replicator { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-static-replicator"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&etb_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + }; + + in-ports { + port { + replicator_in_port0: endpoint { + remote-endpoint = <&funnel_out_port0>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml new file mode 100644 index 000000000000..905008faa012 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-stm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight System Trace MacroCell + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The STM is a trace source that is integrated into a CoreSight system, designed + primarily for high-bandwidth trace of instrumentation embedded into software. + This instrumentation is made up of memory-mapped writes to the STM Advanced + eXtensible Interface (AXI) slave, which carry information about the behavior + of the software. + +select: + properties: + compatible: + contains: + const: arm,coresight-stm + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-stm + - const: arm,primecell + + reg: + maxItems: 2 + + reg-names: + items: + - const: stm-base + - const: stm-stimulus-base + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Output connection to the CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - out-ports + +unevaluatedProperties: false + +examples: + - | + stm@20100000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x20100000 0x1000>, + <0x28000000 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + out-ports { + port { + stm_out_port: endpoint { + remote-endpoint = <&main_funnel_in_port2>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml new file mode 100644 index 000000000000..ee1ce47225be --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight Trace Memory Controller + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + Trace Memory Controller is used for Embedded Trace Buffer(ETB), Embedded Trace + FIFO(ETF) and Embedded Trace Router(ETR) configurations. The configuration + mode (ETB, ETF, ETR) is discovered at boot time when the device is probed. + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + const: arm,coresight-tmc + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-tmc + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + arm,buffer-size: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Size of contiguous buffer space for TMC ETR (embedded trace router). The + buffer size can be configured dynamically via buffer_size property in + sysfs instead. + + arm,scatter-gather: + type: boolean + description: + Indicates that the TMC-ETR can safely use the SG mode on this system. + + arm,max-burst-size: + description: + The maximum burst size initiated by TMC on the AXI master interface. The + burst size can be in the range [0..15], the setting supports one data + transfer per burst up to a maximum of 16 data transfers per burst. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Input connection from the CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: AXI Master output connection. Used for ETR and ETF + configurations. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - in-ports + +unevaluatedProperties: false + +examples: + - | + etr@20070000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x20070000 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&replicator2_out_port0>; + }; + }; + }; + + out-ports { + port { + etr_out_port: endpoint { + remote-endpoint = <&catu_in_port>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml new file mode 100644 index 000000000000..e80d48200c37 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-tpiu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight Trace Port Interface Unit + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The CoreSight Trace Port Interface Unit captures trace data from the trace bus + and outputs it to an external trace port. + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + const: arm,coresight-tpiu + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-tpiu + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Input connection from the CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - in-ports + +unevaluatedProperties: false + +examples: + - | + tpiu@e3c05000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0xe3c05000 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&funnel4_out_port0>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt deleted file mode 100644 index c68d93a35b6c..000000000000 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ /dev/null @@ -1,402 +0,0 @@ -* CoreSight Components: - -CoreSight components are compliant with the ARM CoreSight architecture -specification and can be connected in various topologies to suit a particular -SoCs tracing needs. These trace components can generally be classified as -sinks, links and sources. Trace data produced by one or more sources flows -through the intermediate links connecting the source to the currently selected -sink. Each CoreSight component device should use these properties to describe -its hardware characteristcs. - -* Required properties for all components *except* non-configurable replicators - and non-configurable funnels: - - * compatible: These have to be supplemented with "arm,primecell" as - drivers are using the AMBA bus interface. Possible values include: - - Embedded Trace Buffer (version 1.0): - "arm,coresight-etb10", "arm,primecell"; - - - Trace Port Interface Unit: - "arm,coresight-tpiu", "arm,primecell"; - - - Trace Memory Controller, used for Embedded Trace Buffer(ETB), - Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR) - configuration. The configuration mode (ETB, ETF, ETR) is - discovered at boot time when the device is probed. - "arm,coresight-tmc", "arm,primecell"; - - - Trace Programmable Funnel: - "arm,coresight-dynamic-funnel", "arm,primecell"; - "arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For - backward compatibility and will be removed) - - - Embedded Trace Macrocell (version 3.x) and - Program Flow Trace Macrocell: - "arm,coresight-etm3x", "arm,primecell"; - - - Embedded Trace Macrocell (version 4.x), with memory mapped access. - "arm,coresight-etm4x", "arm,primecell"; - - - Embedded Trace Macrocell (version 4.x), with system register access only. - "arm,coresight-etm4x-sysreg"; - - - Coresight programmable Replicator : - "arm,coresight-dynamic-replicator", "arm,primecell"; - - - System Trace Macrocell: - "arm,coresight-stm", "arm,primecell"; [1] - - Coresight Address Translation Unit (CATU) - "arm,coresight-catu", "arm,primecell"; - - - Coresight Cross Trigger Interface (CTI): - "arm,coresight-cti", "arm,primecell"; - See coresight-cti.yaml for full CTI definitions. - - * reg: physical base address and length of the register - set(s) of the component. - - * clocks: the clocks associated to this component. - - * clock-names: the name of the clocks referenced by the code. - Since we are using the AMBA framework, the name of the clock - providing the interconnect should be "apb_pclk", and some - coresight blocks also have an additional clock "atclk", which - clocks the core of that coresight component. The latter clock - is optional. - - * port or ports: see "Graph bindings for Coresight" below. - -* Additional required property for Embedded Trace Macrocell (version 3.x and - version 4.x): - * cpu: the cpu phandle this ETM/PTM is affined to. Do not - assume it to default to CPU0 if omitted. - -* Additional required properties for System Trace Macrocells (STM): - * reg: along with the physical base address and length of the register - set as described above, another entry is required to describe the - mapping of the extended stimulus port area. - - * reg-names: the only acceptable values are "stm-base" and - "stm-stimulus-base", each corresponding to the areas defined in "reg". - -* Required properties for Coresight Cross Trigger Interface (CTI) - See coresight-cti.yaml for full CTI definitions. - -* Required properties for devices that don't show up on the AMBA bus, such as - non-configurable replicators and non-configurable funnels: - - * compatible: Currently supported value is (note the absence of the - AMBA markee): - - Coresight Non-configurable Replicator: - "arm,coresight-static-replicator"; - "arm,coresight-replicator"; (OBSOLETE. For backward - compatibility and will be removed) - - - Coresight Non-configurable Funnel: - "arm,coresight-static-funnel"; - - * port or ports: see "Graph bindings for Coresight" below. - -* Optional properties for all components: - - * arm,coresight-loses-context-with-cpu : boolean. Indicates that the - hardware will lose register context on CPU power down (e.g. CPUIdle). - An example of where this may be needed are systems which contain a - coresight component and CPU in the same power domain. When the CPU - powers down the coresight component also powers down and loses its - context. This property is currently only used for the ETM 4.x driver. - -* Optional properties for ETM/PTMs: - - * arm,cp14: must be present if the system accesses ETM/PTM management - registers via co-processor 14. - - * qcom,skip-power-up: boolean. Indicates that an implementation can - skip powering up the trace unit. TRCPDCR.PU does not have to be set - on Qualcomm Technologies Inc. systems since ETMs are in the same power - domain as their CPU cores. This property is required to identify such - systems with hardware errata where the CPU watchdog counter is stopped - when TRCPDCR.PU is set. - -* Optional property for TMC: - - * arm,buffer-size: size of contiguous buffer space for TMC ETR - (embedded trace router). This property is obsolete. The buffer size - can be configured dynamically via buffer_size property in sysfs. - - * arm,scatter-gather: boolean. Indicates that the TMC-ETR can safely - use the SG mode on this system. - - * arm,max-burst-size: The maximum burst size initiated by TMC on the - AXI master interface. The burst size can be in the range [0..15], - the setting supports one data transfer per burst up to a maximum of - 16 data transfers per burst. - -* Optional property for CATU : - * interrupts : Exactly one SPI may be listed for reporting the address - error - -* Optional property for configurable replicators: - - * qcom,replicator-loses-context: boolean. Indicates that the replicator - will lose register context when AMBA clock is removed which is observed - in some replicator designs. - -Graph bindings for Coresight -------------------------------- - -Coresight components are interconnected to create a data path for the flow of -trace data generated from the "sources" to their collection points "sink". -Each coresight component must describe the "input" and "output" connections. -The connections must be described via generic DT graph bindings as described -by the "bindings/graph.txt", where each "port" along with an "endpoint" -component represents a hardware port and the connection. - - * All output ports must be listed inside a child node named "out-ports" - * All input ports must be listed inside a child node named "in-ports". - * Port address must match the hardware port number. - -Example: - -1. Sinks - etb@20010000 { - compatible = "arm,coresight-etb10", "arm,primecell"; - reg = <0 0x20010000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - in-ports { - port { - etb_in_port: endpoint@0 { - remote-endpoint = <&replicator_out_port0>; - }; - }; - }; - }; - - tpiu@20030000 { - compatible = "arm,coresight-tpiu", "arm,primecell"; - reg = <0 0x20030000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - in-ports { - port { - tpiu_in_port: endpoint@0 { - remote-endpoint = <&replicator_out_port1>; - }; - }; - }; - }; - - etr@20070000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0 0x20070000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - in-ports { - port { - etr_in_port: endpoint { - remote-endpoint = <&replicator2_out_port0>; - }; - }; - }; - - out-ports { - port { - etr_out_port: endpoint { - remote-endpoint = <&catu_in_port>; - }; - }; - }; - }; - -2. Links - replicator { - /* non-configurable replicators don't show up on the - * AMBA bus. As such no need to add "arm,primecell". - */ - compatible = "arm,coresight-static-replicator"; - - out-ports { - #address-cells = <1>; - #size-cells = <0>; - - /* replicator output ports */ - port@0 { - reg = <0>; - replicator_out_port0: endpoint { - remote-endpoint = <&etb_in_port>; - }; - }; - - port@1 { - reg = <1>; - replicator_out_port1: endpoint { - remote-endpoint = <&tpiu_in_port>; - }; - }; - }; - - in-ports { - port { - replicator_in_port0: endpoint { - remote-endpoint = <&funnel_out_port0>; - }; - }; - }; - }; - - funnel { - /* - * non-configurable funnel don't show up on the AMBA - * bus. As such no need to add "arm,primecell". - */ - compatible = "arm,coresight-static-funnel"; - clocks = <&crg_ctrl HI3660_PCLK>; - clock-names = "apb_pclk"; - - out-ports { - port { - combo_funnel_out: endpoint { - remote-endpoint = <&top_funnel_in>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - combo_funnel_in0: endpoint { - remote-endpoint = <&cluster0_etf_out>; - }; - }; - - port@1 { - reg = <1>; - combo_funnel_in1: endpoint { - remote-endpoint = <&cluster1_etf_out>; - }; - }; - }; - }; - - funnel@20040000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x20040000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - out-ports { - port { - funnel_out_port0: endpoint { - remote-endpoint = - <&replicator_in_port0>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - funnel_in_port0: endpoint { - remote-endpoint = <&ptm0_out_port>; - }; - }; - - port@1 { - reg = <1>; - funnel_in_port1: endpoint { - remote-endpoint = <&ptm1_out_port>; - }; - }; - - port@2 { - reg = <2>; - funnel_in_port2: endpoint { - remote-endpoint = <&etm0_out_port>; - }; - }; - - }; - }; - -3. Sources - ptm@2201c000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0 0x2201c000 0 0x1000>; - - cpu = <&cpu0>; - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - out-ports { - port { - ptm0_out_port: endpoint { - remote-endpoint = <&funnel_in_port0>; - }; - }; - }; - }; - - ptm@2201d000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0 0x2201d000 0 0x1000>; - - cpu = <&cpu1>; - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - out-ports { - port { - ptm1_out_port: endpoint { - remote-endpoint = <&funnel_in_port1>; - }; - }; - }; - }; - -4. STM - stm@20100000 { - compatible = "arm,coresight-stm", "arm,primecell"; - reg = <0 0x20100000 0 0x1000>, - <0 0x28000000 0 0x180000>; - reg-names = "stm-base", "stm-stimulus-base"; - - clocks = <&soc_smc50mhz>; - clock-names = "apb_pclk"; - out-ports { - port { - stm_out_port: endpoint { - remote-endpoint = <&main_funnel_in_port2>; - }; - }; - }; - }; - -5. CATU - - catu@207e0000 { - compatible = "arm,coresight-catu", "arm,primecell"; - reg = <0 0x207e0000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - in-ports { - port { - catu_in_port: endpoint { - remote-endpoint = <&etr_out_port>; - }; - }; - }; - }; - -[1]. There is currently two version of STM: STM32 and STM500. Both -have the same HW interface and as such don't need an explicit binding name. -- 2.34.1 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 1/2] dt-bindings: arm: Convert CoreSight bindings to DT schema @ 2022-05-20 21:44 ` Rob Herring 0 siblings, 0 replies; 18+ messages in thread From: Rob Herring @ 2022-05-20 21:44 UTC (permalink / raw) To: Mathieu Poirier, Mike Leach, Leo Yan, Suzuki K Poulose, Krzysztof Kozlowski Cc: devicetree, linux-kernel, linux-arm-kernel Each CoreSight component has slightly different requirements and nothing applies to every component, so each CoreSight component has its own schema document. Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/arm/arm,coresight-catu.yaml | 101 +++++ .../arm/arm,coresight-dynamic-funnel.yaml | 126 ++++++ .../bindings/arm/arm,coresight-etb10.yaml | 92 ++++ .../bindings/arm/arm,coresight-etm.yaml | 156 +++++++ .../arm/arm,coresight-static-replicator.yaml | 90 ++++ .../bindings/arm/arm,coresight-stm.yaml | 101 +++++ .../bindings/arm/arm,coresight-tmc.yaml | 132 ++++++ .../bindings/arm/arm,coresight-tpiu.yaml | 91 ++++ .../devicetree/bindings/arm/coresight.txt | 402 ------------------ 9 files changed, 889 insertions(+), 402 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml delete mode 100644 Documentation/devicetree/bindings/arm/coresight.txt diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml new file mode 100644 index 000000000000..d783d9276124 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-catu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Coresight Address Translation Unit (CATU) + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The CoreSight Address Translation Unit (CATU) translates addresses between an + AXI master and system memory. The CATU is normally used along with the TMC to + implement scattering of virtual trace buffers in physical memory. The CATU + translates contiguous Virtual Addresses (VAs) from an AXI master into + non-contiguous Physical Addresses (PAs) that are intended for system memory. + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + const: arm,coresight-catu + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-catu + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + interrupts: + maxItems: 1 + description: Address translation error interrupt + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: AXI Slave connected to another Coresight component + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - in-ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + catu@207e0000 { + compatible = "arm,coresight-catu", "arm,primecell"; + reg = <0x207e0000 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + in-ports { + port { + catu_in_port: endpoint { + remote-endpoint = <&etr_out_port>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml new file mode 100644 index 000000000000..1eeedc22857c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-funnel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight Programmable Trace Bus Funnel + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The Coresight funnel merges 2-8 trace sources into a single trace + stream with programmable enable and priority of input ports. + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + const: arm,coresight-dynamic-funnel + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-dynamic-funnel + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + '^port(@[0-7])?$': + description: Input connections from CoreSight Trace bus + $ref: /schemas/graph.yaml#/properties/port + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Output connection to CoreSight Trace bus + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - in-ports + - out-ports + +unevaluatedProperties: false + +examples: + - | + funnel@20040000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x20040000 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + out-ports { + port { + funnel_out_port0: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_in_port0: endpoint { + remote-endpoint = <&ptm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + funnel_in_port1: endpoint { + remote-endpoint = <&ptm1_out_port>; + }; + }; + + port@2 { + reg = <2>; + funnel_in_port2: endpoint { + remote-endpoint = <&etm0_out_port>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml new file mode 100644 index 000000000000..fd06ede26ceb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-etb10.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight Embedded Trace Buffer + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The CoreSight Embedded Trace Buffer stores traces in a dedicated SRAM that is + used as a circular buffer. + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + const: arm,coresight-etb10 + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-etb10 + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Input connection from CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - in-ports + +unevaluatedProperties: false + +examples: + - | + etb@20010000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0x20010000 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + in-ports { + port { + etb_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml new file mode 100644 index 000000000000..e0377ce48537 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-etm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight Embedded Trace MacroCell + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The Embedded Trace Macrocell (ETM) is a real-time trace module providing + instruction and data tracing of a processor. + +select: + properties: + compatible: + contains: + enum: + - arm,coresight-etm3x + - arm,coresight-etm4x + - arm,coresight-etm4x-sysreg + required: + - compatible + +allOf: + - if: + not: + properties: + compatible: + contains: + const: arm,coresight-etm4x-sysreg + then: + $ref: /schemas/arm/primecell.yaml# + required: + - reg + +properties: + compatible: + oneOf: + - description: + Embedded Trace Macrocell with memory mapped access. + items: + - enum: + - arm,coresight-etm3x + - arm,coresight-etm4x + - const: arm,primecell + - description: + Embedded Trace Macrocell (version 4.x), with system register access only + const: arm,coresight-etm4x-sysreg + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + arm,coresight-loses-context-with-cpu: + type: boolean + description: + Indicates that the hardware will lose register context on CPU power down + (e.g. CPUIdle). An example of where this may be needed are systems which + contain a coresight component and CPU in the same power domain. When the + CPU powers down the coresight component also powers down and loses its + context. + + arm,cp14: + type: boolean + description: + Must be present if the system accesses ETM/PTM management registers via + co-processor 14. + + qcom,skip-power-up: + type: boolean + description: + Indicates that an implementation can skip powering up the trace unit. + TRCPDCR.PU does not have to be set on Qualcomm Technologies Inc. systems + since ETMs are in the same power domain as their CPU cores. This property + is required to identify such systems with hardware errata where the CPU + watchdog counter is stopped when TRCPDCR.PU is set. + + cpu: + description: + phandle to the cpu this ETM is bound to. + $ref: /schemas/types.yaml#/definitions/phandle + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Output connection from the ETM to CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - clocks + - clock-names + - cpu + - out-ports + +unevaluatedProperties: false + +examples: + - | + ptm@2201c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x2201c000 0x1000>; + + cpu = <&cpu0>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; + }; + }; + }; + + ptm@2201d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x2201d000 0x1000>; + + cpu = <&cpu1>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml new file mode 100644 index 000000000000..66ee97370fb2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-static-replicator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight Static Trace Bus Replicator + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The Coresight replicator splits a single trace stream into two trace streams + for systems that have more than one trace sink component. + +properties: + compatible: + const: arm,coresight-static-replicator + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Input connection from CoreSight Trace bus + $ref: /schemas/graph.yaml#/properties/port + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + '^port@[01]$': + description: Output connections to CoreSight Trace bus + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - in-ports + - out-ports + +additionalProperties: false + +examples: + - | + replicator { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-static-replicator"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&etb_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + }; + + in-ports { + port { + replicator_in_port0: endpoint { + remote-endpoint = <&funnel_out_port0>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml new file mode 100644 index 000000000000..905008faa012 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-stm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight System Trace MacroCell + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The STM is a trace source that is integrated into a CoreSight system, designed + primarily for high-bandwidth trace of instrumentation embedded into software. + This instrumentation is made up of memory-mapped writes to the STM Advanced + eXtensible Interface (AXI) slave, which carry information about the behavior + of the software. + +select: + properties: + compatible: + contains: + const: arm,coresight-stm + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-stm + - const: arm,primecell + + reg: + maxItems: 2 + + reg-names: + items: + - const: stm-base + - const: stm-stimulus-base + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Output connection to the CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - out-ports + +unevaluatedProperties: false + +examples: + - | + stm@20100000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x20100000 0x1000>, + <0x28000000 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + out-ports { + port { + stm_out_port: endpoint { + remote-endpoint = <&main_funnel_in_port2>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml new file mode 100644 index 000000000000..ee1ce47225be --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight Trace Memory Controller + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + Trace Memory Controller is used for Embedded Trace Buffer(ETB), Embedded Trace + FIFO(ETF) and Embedded Trace Router(ETR) configurations. The configuration + mode (ETB, ETF, ETR) is discovered at boot time when the device is probed. + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + const: arm,coresight-tmc + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-tmc + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + arm,buffer-size: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Size of contiguous buffer space for TMC ETR (embedded trace router). The + buffer size can be configured dynamically via buffer_size property in + sysfs instead. + + arm,scatter-gather: + type: boolean + description: + Indicates that the TMC-ETR can safely use the SG mode on this system. + + arm,max-burst-size: + description: + The maximum burst size initiated by TMC on the AXI master interface. The + burst size can be in the range [0..15], the setting supports one data + transfer per burst up to a maximum of 16 data transfers per burst. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Input connection from the CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: AXI Master output connection. Used for ETR and ETF + configurations. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - in-ports + +unevaluatedProperties: false + +examples: + - | + etr@20070000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x20070000 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&replicator2_out_port0>; + }; + }; + }; + + out-ports { + port { + etr_out_port: endpoint { + remote-endpoint = <&catu_in_port>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml new file mode 100644 index 000000000000..e80d48200c37 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-tpiu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CoreSight Trace Port Interface Unit + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The CoreSight Trace Port Interface Unit captures trace data from the trace bus + and outputs it to an external trace port. + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + const: arm,coresight-tpiu + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-tpiu + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: apb_pclk + - const: atclk + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Input connection from the CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - in-ports + +unevaluatedProperties: false + +examples: + - | + tpiu@e3c05000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0xe3c05000 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&funnel4_out_port0>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt deleted file mode 100644 index c68d93a35b6c..000000000000 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ /dev/null @@ -1,402 +0,0 @@ -* CoreSight Components: - -CoreSight components are compliant with the ARM CoreSight architecture -specification and can be connected in various topologies to suit a particular -SoCs tracing needs. These trace components can generally be classified as -sinks, links and sources. Trace data produced by one or more sources flows -through the intermediate links connecting the source to the currently selected -sink. Each CoreSight component device should use these properties to describe -its hardware characteristcs. - -* Required properties for all components *except* non-configurable replicators - and non-configurable funnels: - - * compatible: These have to be supplemented with "arm,primecell" as - drivers are using the AMBA bus interface. Possible values include: - - Embedded Trace Buffer (version 1.0): - "arm,coresight-etb10", "arm,primecell"; - - - Trace Port Interface Unit: - "arm,coresight-tpiu", "arm,primecell"; - - - Trace Memory Controller, used for Embedded Trace Buffer(ETB), - Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR) - configuration. The configuration mode (ETB, ETF, ETR) is - discovered at boot time when the device is probed. - "arm,coresight-tmc", "arm,primecell"; - - - Trace Programmable Funnel: - "arm,coresight-dynamic-funnel", "arm,primecell"; - "arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For - backward compatibility and will be removed) - - - Embedded Trace Macrocell (version 3.x) and - Program Flow Trace Macrocell: - "arm,coresight-etm3x", "arm,primecell"; - - - Embedded Trace Macrocell (version 4.x), with memory mapped access. - "arm,coresight-etm4x", "arm,primecell"; - - - Embedded Trace Macrocell (version 4.x), with system register access only. - "arm,coresight-etm4x-sysreg"; - - - Coresight programmable Replicator : - "arm,coresight-dynamic-replicator", "arm,primecell"; - - - System Trace Macrocell: - "arm,coresight-stm", "arm,primecell"; [1] - - Coresight Address Translation Unit (CATU) - "arm,coresight-catu", "arm,primecell"; - - - Coresight Cross Trigger Interface (CTI): - "arm,coresight-cti", "arm,primecell"; - See coresight-cti.yaml for full CTI definitions. - - * reg: physical base address and length of the register - set(s) of the component. - - * clocks: the clocks associated to this component. - - * clock-names: the name of the clocks referenced by the code. - Since we are using the AMBA framework, the name of the clock - providing the interconnect should be "apb_pclk", and some - coresight blocks also have an additional clock "atclk", which - clocks the core of that coresight component. The latter clock - is optional. - - * port or ports: see "Graph bindings for Coresight" below. - -* Additional required property for Embedded Trace Macrocell (version 3.x and - version 4.x): - * cpu: the cpu phandle this ETM/PTM is affined to. Do not - assume it to default to CPU0 if omitted. - -* Additional required properties for System Trace Macrocells (STM): - * reg: along with the physical base address and length of the register - set as described above, another entry is required to describe the - mapping of the extended stimulus port area. - - * reg-names: the only acceptable values are "stm-base" and - "stm-stimulus-base", each corresponding to the areas defined in "reg". - -* Required properties for Coresight Cross Trigger Interface (CTI) - See coresight-cti.yaml for full CTI definitions. - -* Required properties for devices that don't show up on the AMBA bus, such as - non-configurable replicators and non-configurable funnels: - - * compatible: Currently supported value is (note the absence of the - AMBA markee): - - Coresight Non-configurable Replicator: - "arm,coresight-static-replicator"; - "arm,coresight-replicator"; (OBSOLETE. For backward - compatibility and will be removed) - - - Coresight Non-configurable Funnel: - "arm,coresight-static-funnel"; - - * port or ports: see "Graph bindings for Coresight" below. - -* Optional properties for all components: - - * arm,coresight-loses-context-with-cpu : boolean. Indicates that the - hardware will lose register context on CPU power down (e.g. CPUIdle). - An example of where this may be needed are systems which contain a - coresight component and CPU in the same power domain. When the CPU - powers down the coresight component also powers down and loses its - context. This property is currently only used for the ETM 4.x driver. - -* Optional properties for ETM/PTMs: - - * arm,cp14: must be present if the system accesses ETM/PTM management - registers via co-processor 14. - - * qcom,skip-power-up: boolean. Indicates that an implementation can - skip powering up the trace unit. TRCPDCR.PU does not have to be set - on Qualcomm Technologies Inc. systems since ETMs are in the same power - domain as their CPU cores. This property is required to identify such - systems with hardware errata where the CPU watchdog counter is stopped - when TRCPDCR.PU is set. - -* Optional property for TMC: - - * arm,buffer-size: size of contiguous buffer space for TMC ETR - (embedded trace router). This property is obsolete. The buffer size - can be configured dynamically via buffer_size property in sysfs. - - * arm,scatter-gather: boolean. Indicates that the TMC-ETR can safely - use the SG mode on this system. - - * arm,max-burst-size: The maximum burst size initiated by TMC on the - AXI master interface. The burst size can be in the range [0..15], - the setting supports one data transfer per burst up to a maximum of - 16 data transfers per burst. - -* Optional property for CATU : - * interrupts : Exactly one SPI may be listed for reporting the address - error - -* Optional property for configurable replicators: - - * qcom,replicator-loses-context: boolean. Indicates that the replicator - will lose register context when AMBA clock is removed which is observed - in some replicator designs. - -Graph bindings for Coresight -------------------------------- - -Coresight components are interconnected to create a data path for the flow of -trace data generated from the "sources" to their collection points "sink". -Each coresight component must describe the "input" and "output" connections. -The connections must be described via generic DT graph bindings as described -by the "bindings/graph.txt", where each "port" along with an "endpoint" -component represents a hardware port and the connection. - - * All output ports must be listed inside a child node named "out-ports" - * All input ports must be listed inside a child node named "in-ports". - * Port address must match the hardware port number. - -Example: - -1. Sinks - etb@20010000 { - compatible = "arm,coresight-etb10", "arm,primecell"; - reg = <0 0x20010000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - in-ports { - port { - etb_in_port: endpoint@0 { - remote-endpoint = <&replicator_out_port0>; - }; - }; - }; - }; - - tpiu@20030000 { - compatible = "arm,coresight-tpiu", "arm,primecell"; - reg = <0 0x20030000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - in-ports { - port { - tpiu_in_port: endpoint@0 { - remote-endpoint = <&replicator_out_port1>; - }; - }; - }; - }; - - etr@20070000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0 0x20070000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - in-ports { - port { - etr_in_port: endpoint { - remote-endpoint = <&replicator2_out_port0>; - }; - }; - }; - - out-ports { - port { - etr_out_port: endpoint { - remote-endpoint = <&catu_in_port>; - }; - }; - }; - }; - -2. Links - replicator { - /* non-configurable replicators don't show up on the - * AMBA bus. As such no need to add "arm,primecell". - */ - compatible = "arm,coresight-static-replicator"; - - out-ports { - #address-cells = <1>; - #size-cells = <0>; - - /* replicator output ports */ - port@0 { - reg = <0>; - replicator_out_port0: endpoint { - remote-endpoint = <&etb_in_port>; - }; - }; - - port@1 { - reg = <1>; - replicator_out_port1: endpoint { - remote-endpoint = <&tpiu_in_port>; - }; - }; - }; - - in-ports { - port { - replicator_in_port0: endpoint { - remote-endpoint = <&funnel_out_port0>; - }; - }; - }; - }; - - funnel { - /* - * non-configurable funnel don't show up on the AMBA - * bus. As such no need to add "arm,primecell". - */ - compatible = "arm,coresight-static-funnel"; - clocks = <&crg_ctrl HI3660_PCLK>; - clock-names = "apb_pclk"; - - out-ports { - port { - combo_funnel_out: endpoint { - remote-endpoint = <&top_funnel_in>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - combo_funnel_in0: endpoint { - remote-endpoint = <&cluster0_etf_out>; - }; - }; - - port@1 { - reg = <1>; - combo_funnel_in1: endpoint { - remote-endpoint = <&cluster1_etf_out>; - }; - }; - }; - }; - - funnel@20040000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x20040000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - out-ports { - port { - funnel_out_port0: endpoint { - remote-endpoint = - <&replicator_in_port0>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - funnel_in_port0: endpoint { - remote-endpoint = <&ptm0_out_port>; - }; - }; - - port@1 { - reg = <1>; - funnel_in_port1: endpoint { - remote-endpoint = <&ptm1_out_port>; - }; - }; - - port@2 { - reg = <2>; - funnel_in_port2: endpoint { - remote-endpoint = <&etm0_out_port>; - }; - }; - - }; - }; - -3. Sources - ptm@2201c000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0 0x2201c000 0 0x1000>; - - cpu = <&cpu0>; - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - out-ports { - port { - ptm0_out_port: endpoint { - remote-endpoint = <&funnel_in_port0>; - }; - }; - }; - }; - - ptm@2201d000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0 0x2201d000 0 0x1000>; - - cpu = <&cpu1>; - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - out-ports { - port { - ptm1_out_port: endpoint { - remote-endpoint = <&funnel_in_port1>; - }; - }; - }; - }; - -4. STM - stm@20100000 { - compatible = "arm,coresight-stm", "arm,primecell"; - reg = <0 0x20100000 0 0x1000>, - <0 0x28000000 0 0x180000>; - reg-names = "stm-base", "stm-stimulus-base"; - - clocks = <&soc_smc50mhz>; - clock-names = "apb_pclk"; - out-ports { - port { - stm_out_port: endpoint { - remote-endpoint = <&main_funnel_in_port2>; - }; - }; - }; - }; - -5. CATU - - catu@207e0000 { - compatible = "arm,coresight-catu", "arm,primecell"; - reg = <0 0x207e0000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - in-ports { - port { - catu_in_port: endpoint { - remote-endpoint = <&etr_out_port>; - }; - }; - }; - }; - -[1]. There is currently two version of STM: STM32 and STM500. Both -have the same HW interface and as such don't need an explicit binding name. -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: Convert CoreSight bindings to DT schema 2022-05-20 21:44 ` Rob Herring @ 2022-05-21 14:54 ` Krzysztof Kozlowski -1 siblings, 0 replies; 18+ messages in thread From: Krzysztof Kozlowski @ 2022-05-21 14:54 UTC (permalink / raw) To: Rob Herring, Mathieu Poirier, Mike Leach, Leo Yan, Suzuki K Poulose, Krzysztof Kozlowski Cc: devicetree, linux-kernel, linux-arm-kernel On 20/05/2022 23:44, Rob Herring wrote: > Each CoreSight component has slightly different requirements and > nothing applies to every component, so each CoreSight component has its > own schema document. > (...) > + const: arm,coresight-dynamic-funnel > + required: > + - compatible > + > +allOf: > + - $ref: /schemas/arm/primecell.yaml# > + > +properties: > + compatible: > + items: > + - const: arm,coresight-dynamic-funnel > + - const: arm,primecell > + > + reg: > + maxItems: 1 > + > + clocks: > + minItems: 1 > + maxItems: 2 > + > + clock-names: > + minItems: 1 > + items: > + - const: apb_pclk > + - const: atclk > + > + in-ports: > + $ref: /schemas/graph.yaml#/properties/ports Shouldn't this be with unevaluatedProperties:false? > + > + patternProperties: > + '^port(@[0-7])?$': > + description: Input connections from CoreSight Trace bus > + $ref: /schemas/graph.yaml#/properties/port > + > + out-ports: > + $ref: /schemas/graph.yaml#/properties/ports > + additionalProperties: false > + > + properties: > + port: > + description: Output connection to CoreSight Trace bus > + $ref: /schemas/graph.yaml#/properties/port > + (...) > +title: Arm CoreSight Static Trace Bus Replicator > + > +maintainers: > + - Mathieu Poirier <mathieu.poirier@linaro.org> > + - Mike Leach <mike.leach@linaro.org> > + - Leo Yan <leo.yan@linaro.org> > + - Suzuki K Poulose <suzuki.poulose@arm.com> > + > +description: | > + CoreSight components are compliant with the ARM CoreSight architecture > + specification and can be connected in various topologies to suit a particular > + SoCs tracing needs. These trace components can generally be classified as > + sinks, links and sources. Trace data produced by one or more sources flows > + through the intermediate links connecting the source to the currently selected > + sink. > + > + The Coresight replicator splits a single trace stream into two trace streams > + for systems that have more than one trace sink component. > + > +properties: > + compatible: > + const: arm,coresight-static-replicator > + > + in-ports: > + $ref: /schemas/graph.yaml#/properties/ports > + additionalProperties: false > + > + properties: > + port: > + description: Input connection from CoreSight Trace bus > + $ref: /schemas/graph.yaml#/properties/port > + > + out-ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + patternProperties: > + '^port@[01]$': > + description: Output connections to CoreSight Trace bus > + $ref: /schemas/graph.yaml#/properties/port > + Same question. (...) > +title: Arm CoreSight Trace Memory Controller > + > +maintainers: > + - Mathieu Poirier <mathieu.poirier@linaro.org> > + - Mike Leach <mike.leach@linaro.org> > + - Leo Yan <leo.yan@linaro.org> > + - Suzuki K Poulose <suzuki.poulose@arm.com> > + > +description: | > + CoreSight components are compliant with the ARM CoreSight architecture > + specification and can be connected in various topologies to suit a particular > + SoCs tracing needs. These trace components can generally be classified as > + sinks, links and sources. Trace data produced by one or more sources flows > + through the intermediate links connecting the source to the currently selected > + sink. > + > + Trace Memory Controller is used for Embedded Trace Buffer(ETB), Embedded Trace > + FIFO(ETF) and Embedded Trace Router(ETR) configurations. The configuration > + mode (ETB, ETF, ETR) is discovered at boot time when the device is probed. > + > +# Need a custom select here or 'arm,primecell' will match on lots of nodes > +select: > + properties: > + compatible: > + contains: > + const: arm,coresight-tmc > + required: > + - compatible > + > +allOf: > + - $ref: /schemas/arm/primecell.yaml# > + > +properties: > + compatible: > + items: > + - const: arm,coresight-tmc > + - const: arm,primecell > + > + reg: > + maxItems: 1 > + > + clocks: > + minItems: 1 > + maxItems: 2 > + > + clock-names: > + minItems: 1 > + items: > + - const: apb_pclk > + - const: atclk > + > + arm,buffer-size: > + $ref: /schemas/types.yaml#/definitions/uint32 > + deprecated: true > + description: > + Size of contiguous buffer space for TMC ETR (embedded trace router). The > + buffer size can be configured dynamically via buffer_size property in > + sysfs instead. > + > + arm,scatter-gather: > + type: boolean > + description: > + Indicates that the TMC-ETR can safely use the SG mode on this system. > + > + arm,max-burst-size: > + description: > + The maximum burst size initiated by TMC on the AXI master interface. The > + burst size can be in the range [0..15], the setting supports one data > + transfer per burst up to a maximum of 16 data transfers per burst. > + $ref: /schemas/types.yaml#/definitions/uint32 > + maximum: 15 > + > + Just one blank line Best regards, Krzysztof ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: Convert CoreSight bindings to DT schema @ 2022-05-21 14:54 ` Krzysztof Kozlowski 0 siblings, 0 replies; 18+ messages in thread From: Krzysztof Kozlowski @ 2022-05-21 14:54 UTC (permalink / raw) To: Rob Herring, Mathieu Poirier, Mike Leach, Leo Yan, Suzuki K Poulose, Krzysztof Kozlowski Cc: devicetree, linux-kernel, linux-arm-kernel On 20/05/2022 23:44, Rob Herring wrote: > Each CoreSight component has slightly different requirements and > nothing applies to every component, so each CoreSight component has its > own schema document. > (...) > + const: arm,coresight-dynamic-funnel > + required: > + - compatible > + > +allOf: > + - $ref: /schemas/arm/primecell.yaml# > + > +properties: > + compatible: > + items: > + - const: arm,coresight-dynamic-funnel > + - const: arm,primecell > + > + reg: > + maxItems: 1 > + > + clocks: > + minItems: 1 > + maxItems: 2 > + > + clock-names: > + minItems: 1 > + items: > + - const: apb_pclk > + - const: atclk > + > + in-ports: > + $ref: /schemas/graph.yaml#/properties/ports Shouldn't this be with unevaluatedProperties:false? > + > + patternProperties: > + '^port(@[0-7])?$': > + description: Input connections from CoreSight Trace bus > + $ref: /schemas/graph.yaml#/properties/port > + > + out-ports: > + $ref: /schemas/graph.yaml#/properties/ports > + additionalProperties: false > + > + properties: > + port: > + description: Output connection to CoreSight Trace bus > + $ref: /schemas/graph.yaml#/properties/port > + (...) > +title: Arm CoreSight Static Trace Bus Replicator > + > +maintainers: > + - Mathieu Poirier <mathieu.poirier@linaro.org> > + - Mike Leach <mike.leach@linaro.org> > + - Leo Yan <leo.yan@linaro.org> > + - Suzuki K Poulose <suzuki.poulose@arm.com> > + > +description: | > + CoreSight components are compliant with the ARM CoreSight architecture > + specification and can be connected in various topologies to suit a particular > + SoCs tracing needs. These trace components can generally be classified as > + sinks, links and sources. Trace data produced by one or more sources flows > + through the intermediate links connecting the source to the currently selected > + sink. > + > + The Coresight replicator splits a single trace stream into two trace streams > + for systems that have more than one trace sink component. > + > +properties: > + compatible: > + const: arm,coresight-static-replicator > + > + in-ports: > + $ref: /schemas/graph.yaml#/properties/ports > + additionalProperties: false > + > + properties: > + port: > + description: Input connection from CoreSight Trace bus > + $ref: /schemas/graph.yaml#/properties/port > + > + out-ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + patternProperties: > + '^port@[01]$': > + description: Output connections to CoreSight Trace bus > + $ref: /schemas/graph.yaml#/properties/port > + Same question. (...) > +title: Arm CoreSight Trace Memory Controller > + > +maintainers: > + - Mathieu Poirier <mathieu.poirier@linaro.org> > + - Mike Leach <mike.leach@linaro.org> > + - Leo Yan <leo.yan@linaro.org> > + - Suzuki K Poulose <suzuki.poulose@arm.com> > + > +description: | > + CoreSight components are compliant with the ARM CoreSight architecture > + specification and can be connected in various topologies to suit a particular > + SoCs tracing needs. These trace components can generally be classified as > + sinks, links and sources. Trace data produced by one or more sources flows > + through the intermediate links connecting the source to the currently selected > + sink. > + > + Trace Memory Controller is used for Embedded Trace Buffer(ETB), Embedded Trace > + FIFO(ETF) and Embedded Trace Router(ETR) configurations. The configuration > + mode (ETB, ETF, ETR) is discovered at boot time when the device is probed. > + > +# Need a custom select here or 'arm,primecell' will match on lots of nodes > +select: > + properties: > + compatible: > + contains: > + const: arm,coresight-tmc > + required: > + - compatible > + > +allOf: > + - $ref: /schemas/arm/primecell.yaml# > + > +properties: > + compatible: > + items: > + - const: arm,coresight-tmc > + - const: arm,primecell > + > + reg: > + maxItems: 1 > + > + clocks: > + minItems: 1 > + maxItems: 2 > + > + clock-names: > + minItems: 1 > + items: > + - const: apb_pclk > + - const: atclk > + > + arm,buffer-size: > + $ref: /schemas/types.yaml#/definitions/uint32 > + deprecated: true > + description: > + Size of contiguous buffer space for TMC ETR (embedded trace router). The > + buffer size can be configured dynamically via buffer_size property in > + sysfs instead. > + > + arm,scatter-gather: > + type: boolean > + description: > + Indicates that the TMC-ETR can safely use the SG mode on this system. > + > + arm,max-burst-size: > + description: > + The maximum burst size initiated by TMC on the AXI master interface. The > + burst size can be in the range [0..15], the setting supports one data > + transfer per burst up to a maximum of 16 data transfers per burst. > + $ref: /schemas/types.yaml#/definitions/uint32 > + maximum: 15 > + > + Just one blank line Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: Convert CoreSight bindings to DT schema 2022-05-21 14:54 ` Krzysztof Kozlowski @ 2022-05-23 12:53 ` Rob Herring -1 siblings, 0 replies; 18+ messages in thread From: Rob Herring @ 2022-05-23 12:53 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: Mathieu Poirier, Mike Leach, Leo Yan, Suzuki K Poulose, Krzysztof Kozlowski, devicetree, linux-kernel, linux-arm-kernel On Sat, May 21, 2022 at 04:54:48PM +0200, Krzysztof Kozlowski wrote: > On 20/05/2022 23:44, Rob Herring wrote: > > Each CoreSight component has slightly different requirements and > > nothing applies to every component, so each CoreSight component has its > > own schema document. > > > > (...) > > > + const: arm,coresight-dynamic-funnel > > + required: > > + - compatible > > + > > +allOf: > > + - $ref: /schemas/arm/primecell.yaml# > > + > > +properties: > > + compatible: > > + items: > > + - const: arm,coresight-dynamic-funnel > > + - const: arm,primecell > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + minItems: 1 > > + maxItems: 2 > > + > > + clock-names: > > + minItems: 1 > > + items: > > + - const: apb_pclk > > + - const: atclk > > + > > + in-ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > Shouldn't this be with unevaluatedProperties:false? No, because the ports definition has 'additionalProperties: false'. That does mean port nodes aren't actually restricted to 0-7 in any way. Not really any way to fix that other than listing #address-cells/#size-cells here or a pattern matching disallowed ports. But I think the limit to 8 is just current implementations and perhaps practical limit of how many streams of trace data can be combined. > > + > > + patternProperties: > > + '^port(@[0-7])?$': > > + description: Input connections from CoreSight Trace bus > > + $ref: /schemas/graph.yaml#/properties/port ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: Convert CoreSight bindings to DT schema @ 2022-05-23 12:53 ` Rob Herring 0 siblings, 0 replies; 18+ messages in thread From: Rob Herring @ 2022-05-23 12:53 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: Mathieu Poirier, Mike Leach, Leo Yan, Suzuki K Poulose, Krzysztof Kozlowski, devicetree, linux-kernel, linux-arm-kernel On Sat, May 21, 2022 at 04:54:48PM +0200, Krzysztof Kozlowski wrote: > On 20/05/2022 23:44, Rob Herring wrote: > > Each CoreSight component has slightly different requirements and > > nothing applies to every component, so each CoreSight component has its > > own schema document. > > > > (...) > > > + const: arm,coresight-dynamic-funnel > > + required: > > + - compatible > > + > > +allOf: > > + - $ref: /schemas/arm/primecell.yaml# > > + > > +properties: > > + compatible: > > + items: > > + - const: arm,coresight-dynamic-funnel > > + - const: arm,primecell > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + minItems: 1 > > + maxItems: 2 > > + > > + clock-names: > > + minItems: 1 > > + items: > > + - const: apb_pclk > > + - const: atclk > > + > > + in-ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > Shouldn't this be with unevaluatedProperties:false? No, because the ports definition has 'additionalProperties: false'. That does mean port nodes aren't actually restricted to 0-7 in any way. Not really any way to fix that other than listing #address-cells/#size-cells here or a pattern matching disallowed ports. But I think the limit to 8 is just current implementations and perhaps practical limit of how many streams of trace data can be combined. > > + > > + patternProperties: > > + '^port(@[0-7])?$': > > + description: Input connections from CoreSight Trace bus > > + $ref: /schemas/graph.yaml#/properties/port _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: Convert CoreSight bindings to DT schema 2022-05-20 21:44 ` Rob Herring @ 2022-05-23 11:03 ` Suzuki K Poulose -1 siblings, 0 replies; 18+ messages in thread From: Suzuki K Poulose @ 2022-05-23 11:03 UTC (permalink / raw) To: Rob Herring, Mathieu Poirier, Mike Leach, Leo Yan, Krzysztof Kozlowski Cc: devicetree, linux-kernel, linux-arm-kernel, coresight >> Coresight ML Hi Rob, Thanks a lot for converting these to yaml. Some minor comments below. In general, the "clocks" and "clock-names" are optional (e.g, for etm4 with system register access). On 20/05/2022 22:44, Rob Herring wrote: > Each CoreSight component has slightly different requirements and > nothing applies to every component, so each CoreSight component has its > own schema document. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../bindings/arm/arm,coresight-catu.yaml | 101 +++++ > .../arm/arm,coresight-dynamic-funnel.yaml | 126 ++++++ > .../bindings/arm/arm,coresight-etb10.yaml | 92 ++++ > .../bindings/arm/arm,coresight-etm.yaml | 156 +++++++ > .../arm/arm,coresight-static-replicator.yaml | 90 ++++ > .../bindings/arm/arm,coresight-stm.yaml | 101 +++++ > .../bindings/arm/arm,coresight-tmc.yaml | 132 ++++++ > .../bindings/arm/arm,coresight-tpiu.yaml | 91 ++++ > .../devicetree/bindings/arm/coresight.txt | 402 ------------------ > 9 files changed, 889 insertions(+), 402 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml > delete mode 100644 Documentation/devicetree/bindings/arm/coresight.txt ... > diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml > new file mode 100644 > index 000000000000..ee1ce47225be > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml > @@ -0,0 +1,132 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Arm CoreSight Trace Memory Controller > + ... > + out-ports: > + $ref: /schemas/graph.yaml#/properties/ports > + additionalProperties: false > + > + properties: > + port: > + description: AXI Master output connection. Used for ETR and ETF > + configurations. nit: This is only for ETRs. Never for ETFs. Suzuki ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: Convert CoreSight bindings to DT schema @ 2022-05-23 11:03 ` Suzuki K Poulose 0 siblings, 0 replies; 18+ messages in thread From: Suzuki K Poulose @ 2022-05-23 11:03 UTC (permalink / raw) To: Rob Herring, Mathieu Poirier, Mike Leach, Leo Yan, Krzysztof Kozlowski Cc: devicetree, linux-kernel, linux-arm-kernel, coresight >> Coresight ML Hi Rob, Thanks a lot for converting these to yaml. Some minor comments below. In general, the "clocks" and "clock-names" are optional (e.g, for etm4 with system register access). On 20/05/2022 22:44, Rob Herring wrote: > Each CoreSight component has slightly different requirements and > nothing applies to every component, so each CoreSight component has its > own schema document. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../bindings/arm/arm,coresight-catu.yaml | 101 +++++ > .../arm/arm,coresight-dynamic-funnel.yaml | 126 ++++++ > .../bindings/arm/arm,coresight-etb10.yaml | 92 ++++ > .../bindings/arm/arm,coresight-etm.yaml | 156 +++++++ > .../arm/arm,coresight-static-replicator.yaml | 90 ++++ > .../bindings/arm/arm,coresight-stm.yaml | 101 +++++ > .../bindings/arm/arm,coresight-tmc.yaml | 132 ++++++ > .../bindings/arm/arm,coresight-tpiu.yaml | 91 ++++ > .../devicetree/bindings/arm/coresight.txt | 402 ------------------ > 9 files changed, 889 insertions(+), 402 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml > delete mode 100644 Documentation/devicetree/bindings/arm/coresight.txt ... > diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml > new file mode 100644 > index 000000000000..ee1ce47225be > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml > @@ -0,0 +1,132 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Arm CoreSight Trace Memory Controller > + ... > + out-ports: > + $ref: /schemas/graph.yaml#/properties/ports > + additionalProperties: false > + > + properties: > + port: > + description: AXI Master output connection. Used for ETR and ETF > + configurations. nit: This is only for ETRs. Never for ETFs. Suzuki _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: Convert CoreSight bindings to DT schema 2022-05-23 11:03 ` Suzuki K Poulose @ 2022-05-23 13:57 ` Rob Herring -1 siblings, 0 replies; 18+ messages in thread From: Rob Herring @ 2022-05-23 13:57 UTC (permalink / raw) To: Suzuki K Poulose Cc: Mathieu Poirier, Mike Leach, Leo Yan, Krzysztof Kozlowski, devicetree, linux-kernel, linux-arm-kernel, coresight >> Coresight ML On Mon, May 23, 2022 at 12:03:36PM +0100, Suzuki K Poulose wrote: > Hi Rob, > > Thanks a lot for converting these to yaml. Some minor comments below. > > In general, the "clocks" and "clock-names" are optional (e.g, for > etm4 with system register access). Reality, based on running dtbs_checks, seems to be that all instances have them, and the original doc said required. > > On 20/05/2022 22:44, Rob Herring wrote: > > Each CoreSight component has slightly different requirements and > > nothing applies to every component, so each CoreSight component has its > > own schema document. > > > > Signed-off-by: Rob Herring <robh@kernel.org> > > --- > > .../bindings/arm/arm,coresight-catu.yaml | 101 +++++ > > .../arm/arm,coresight-dynamic-funnel.yaml | 126 ++++++ > > .../bindings/arm/arm,coresight-etb10.yaml | 92 ++++ > > .../bindings/arm/arm,coresight-etm.yaml | 156 +++++++ > > .../arm/arm,coresight-static-replicator.yaml | 90 ++++ > > .../bindings/arm/arm,coresight-stm.yaml | 101 +++++ > > .../bindings/arm/arm,coresight-tmc.yaml | 132 ++++++ > > .../bindings/arm/arm,coresight-tpiu.yaml | 91 ++++ > > .../devicetree/bindings/arm/coresight.txt | 402 ------------------ > > 9 files changed, 889 insertions(+), 402 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml > > delete mode 100644 Documentation/devicetree/bindings/arm/coresight.txt > > ... > > > diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml > > new file mode 100644 > > index 000000000000..ee1ce47225be > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml > > @@ -0,0 +1,132 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Arm CoreSight Trace Memory Controller > > + > > ... > > > + out-ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > + additionalProperties: false > > + > > + properties: > > + port: > > + description: AXI Master output connection. Used for ETR and ETF > > + configurations. > > nit: This is only for ETRs. Never for ETFs. What about this example[1]? It's not AXI, but ATB actually. Rob [1] https://developer.arm.com/documentation/ddi0461/b/Introduction/Example-systems-with-different-configurations/ETF--ETR--and-TPIU ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: Convert CoreSight bindings to DT schema @ 2022-05-23 13:57 ` Rob Herring 0 siblings, 0 replies; 18+ messages in thread From: Rob Herring @ 2022-05-23 13:57 UTC (permalink / raw) To: Suzuki K Poulose Cc: Mathieu Poirier, Mike Leach, Leo Yan, Krzysztof Kozlowski, devicetree, linux-kernel, linux-arm-kernel, coresight >> Coresight ML On Mon, May 23, 2022 at 12:03:36PM +0100, Suzuki K Poulose wrote: > Hi Rob, > > Thanks a lot for converting these to yaml. Some minor comments below. > > In general, the "clocks" and "clock-names" are optional (e.g, for > etm4 with system register access). Reality, based on running dtbs_checks, seems to be that all instances have them, and the original doc said required. > > On 20/05/2022 22:44, Rob Herring wrote: > > Each CoreSight component has slightly different requirements and > > nothing applies to every component, so each CoreSight component has its > > own schema document. > > > > Signed-off-by: Rob Herring <robh@kernel.org> > > --- > > .../bindings/arm/arm,coresight-catu.yaml | 101 +++++ > > .../arm/arm,coresight-dynamic-funnel.yaml | 126 ++++++ > > .../bindings/arm/arm,coresight-etb10.yaml | 92 ++++ > > .../bindings/arm/arm,coresight-etm.yaml | 156 +++++++ > > .../arm/arm,coresight-static-replicator.yaml | 90 ++++ > > .../bindings/arm/arm,coresight-stm.yaml | 101 +++++ > > .../bindings/arm/arm,coresight-tmc.yaml | 132 ++++++ > > .../bindings/arm/arm,coresight-tpiu.yaml | 91 ++++ > > .../devicetree/bindings/arm/coresight.txt | 402 ------------------ > > 9 files changed, 889 insertions(+), 402 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml > > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml > > delete mode 100644 Documentation/devicetree/bindings/arm/coresight.txt > > ... > > > diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml > > new file mode 100644 > > index 000000000000..ee1ce47225be > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml > > @@ -0,0 +1,132 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Arm CoreSight Trace Memory Controller > > + > > ... > > > + out-ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > + additionalProperties: false > > + > > + properties: > > + port: > > + description: AXI Master output connection. Used for ETR and ETF > > + configurations. > > nit: This is only for ETRs. Never for ETFs. What about this example[1]? It's not AXI, but ATB actually. Rob [1] https://developer.arm.com/documentation/ddi0461/b/Introduction/Example-systems-with-different-configurations/ETF--ETR--and-TPIU _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 2/2] dt-bindings: arm: Convert CoreSight CPU debug to DT schema 2022-05-20 21:44 ` Rob Herring @ 2022-05-20 21:44 ` Rob Herring -1 siblings, 0 replies; 18+ messages in thread From: Rob Herring @ 2022-05-20 21:44 UTC (permalink / raw) To: Mathieu Poirier, Mike Leach, Leo Yan, Suzuki K Poulose, Krzysztof Kozlowski Cc: devicetree, linux-kernel, linux-arm-kernel Convert the CoreSight CPU debug binding to DT schema format. Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/arm/arm,coresight-cpu-debug.yaml | 81 +++++++++++++++++++ .../bindings/arm/coresight-cpu-debug.txt | 49 ----------- 2 files changed, 81 insertions(+), 49 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml delete mode 100644 Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml new file mode 100644 index 000000000000..0a6bc03ebe00 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-cpu-debug.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CoreSight CPU Debug Component + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight CPU debug component are compliant with the ARMv8 architecture + reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The + external debug module is mainly used for two modes: self-hosted debug and + external debug, and it can be accessed from mmio region from Coresight and + eventually the debug module connects with CPU for debugging. And the debug + module provides sample-based profiling extension, which can be used to sample + CPU program counter, secure state and exception level, etc; usually every CPU + has one dedicated debug module to be connected. + +select: + properties: + compatible: + contains: + const: arm,coresight-cpu-debug + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-cpu-debug + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + cpu: + description: + A phandle to the cpu this debug component is bound to. + $ref: /schemas/types.yaml#/definitions/phandle + + power-domains: + maxItems: 1 + description: + A phandle to the debug power domain if the debug logic has its own + dedicated power domain. CPU idle states may also need to be separately + constrained to keep CPU cores powered. + +required: + - compatible + - reg + - clocks + - clock-names + - cpu + +unevaluatedProperties: false + +examples: + - | + debug@f6590000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0xf6590000 0x1000>; + clocks = <&sys_ctrl 1>; + clock-names = "apb_pclk"; + cpu = <&cpu0>; + }; +... diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt deleted file mode 100644 index f1de3247c1b7..000000000000 --- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt +++ /dev/null @@ -1,49 +0,0 @@ -* CoreSight CPU Debug Component: - -CoreSight CPU debug component are compliant with the ARMv8 architecture -reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The -external debug module is mainly used for two modes: self-hosted debug and -external debug, and it can be accessed from mmio region from Coresight -and eventually the debug module connects with CPU for debugging. And the -debug module provides sample-based profiling extension, which can be used -to sample CPU program counter, secure state and exception level, etc; -usually every CPU has one dedicated debug module to be connected. - -Required properties: - -- compatible : should be "arm,coresight-cpu-debug"; supplemented with - "arm,primecell" since this driver is using the AMBA bus - interface. - -- reg : physical base address and length of the register set. - -- clocks : the clock associated to this component. - -- clock-names : the name of the clock referenced by the code. Since we are - using the AMBA framework, the name of the clock providing - the interconnect should be "apb_pclk" and the clock is - mandatory. The interface between the debug logic and the - processor core is clocked by the internal CPU clock, so it - is enabled with CPU clock by default. - -- cpu : the CPU phandle the debug module is affined to. Do not assume it - to default to CPU0 if omitted. - -Optional properties: - -- power-domains: a phandle to the debug power domain. We use "power-domains" - binding to turn on the debug logic if it has own dedicated - power domain and if necessary to use "cpuidle.off=1" or - "nohlt" in the kernel command line or sysfs node to - constrain idle states to ensure registers in the CPU power - domain are accessible. - -Example: - - debug@f6590000 { - compatible = "arm,coresight-cpu-debug","arm,primecell"; - reg = <0 0xf6590000 0 0x1000>; - clocks = <&sys_ctrl HI6220_DAPB_CLK>; - clock-names = "apb_pclk"; - cpu = <&cpu0>; - }; -- 2.34.1 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/2] dt-bindings: arm: Convert CoreSight CPU debug to DT schema @ 2022-05-20 21:44 ` Rob Herring 0 siblings, 0 replies; 18+ messages in thread From: Rob Herring @ 2022-05-20 21:44 UTC (permalink / raw) To: Mathieu Poirier, Mike Leach, Leo Yan, Suzuki K Poulose, Krzysztof Kozlowski Cc: devicetree, linux-kernel, linux-arm-kernel Convert the CoreSight CPU debug binding to DT schema format. Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/arm/arm,coresight-cpu-debug.yaml | 81 +++++++++++++++++++ .../bindings/arm/coresight-cpu-debug.txt | 49 ----------- 2 files changed, 81 insertions(+), 49 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml delete mode 100644 Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml new file mode 100644 index 000000000000..0a6bc03ebe00 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-cpu-debug.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CoreSight CPU Debug Component + +maintainers: + - Mathieu Poirier <mathieu.poirier@linaro.org> + - Mike Leach <mike.leach@linaro.org> + - Leo Yan <leo.yan@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + +description: | + CoreSight CPU debug component are compliant with the ARMv8 architecture + reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The + external debug module is mainly used for two modes: self-hosted debug and + external debug, and it can be accessed from mmio region from Coresight and + eventually the debug module connects with CPU for debugging. And the debug + module provides sample-based profiling extension, which can be used to sample + CPU program counter, secure state and exception level, etc; usually every CPU + has one dedicated debug module to be connected. + +select: + properties: + compatible: + contains: + const: arm,coresight-cpu-debug + required: + - compatible + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +properties: + compatible: + items: + - const: arm,coresight-cpu-debug + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + cpu: + description: + A phandle to the cpu this debug component is bound to. + $ref: /schemas/types.yaml#/definitions/phandle + + power-domains: + maxItems: 1 + description: + A phandle to the debug power domain if the debug logic has its own + dedicated power domain. CPU idle states may also need to be separately + constrained to keep CPU cores powered. + +required: + - compatible + - reg + - clocks + - clock-names + - cpu + +unevaluatedProperties: false + +examples: + - | + debug@f6590000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0xf6590000 0x1000>; + clocks = <&sys_ctrl 1>; + clock-names = "apb_pclk"; + cpu = <&cpu0>; + }; +... diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt deleted file mode 100644 index f1de3247c1b7..000000000000 --- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt +++ /dev/null @@ -1,49 +0,0 @@ -* CoreSight CPU Debug Component: - -CoreSight CPU debug component are compliant with the ARMv8 architecture -reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The -external debug module is mainly used for two modes: self-hosted debug and -external debug, and it can be accessed from mmio region from Coresight -and eventually the debug module connects with CPU for debugging. And the -debug module provides sample-based profiling extension, which can be used -to sample CPU program counter, secure state and exception level, etc; -usually every CPU has one dedicated debug module to be connected. - -Required properties: - -- compatible : should be "arm,coresight-cpu-debug"; supplemented with - "arm,primecell" since this driver is using the AMBA bus - interface. - -- reg : physical base address and length of the register set. - -- clocks : the clock associated to this component. - -- clock-names : the name of the clock referenced by the code. Since we are - using the AMBA framework, the name of the clock providing - the interconnect should be "apb_pclk" and the clock is - mandatory. The interface between the debug logic and the - processor core is clocked by the internal CPU clock, so it - is enabled with CPU clock by default. - -- cpu : the CPU phandle the debug module is affined to. Do not assume it - to default to CPU0 if omitted. - -Optional properties: - -- power-domains: a phandle to the debug power domain. We use "power-domains" - binding to turn on the debug logic if it has own dedicated - power domain and if necessary to use "cpuidle.off=1" or - "nohlt" in the kernel command line or sysfs node to - constrain idle states to ensure registers in the CPU power - domain are accessible. - -Example: - - debug@f6590000 { - compatible = "arm,coresight-cpu-debug","arm,primecell"; - reg = <0 0xf6590000 0 0x1000>; - clocks = <&sys_ctrl HI6220_DAPB_CLK>; - clock-names = "apb_pclk"; - cpu = <&cpu0>; - }; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH 2/2] dt-bindings: arm: Convert CoreSight CPU debug to DT schema 2022-05-20 21:44 ` Rob Herring @ 2022-05-21 13:27 ` Leo Yan -1 siblings, 0 replies; 18+ messages in thread From: Leo Yan @ 2022-05-21 13:27 UTC (permalink / raw) To: Rob Herring Cc: Mathieu Poirier, Mike Leach, Suzuki K Poulose, Krzysztof Kozlowski, devicetree, linux-kernel, linux-arm-kernel On Fri, May 20, 2022 at 04:44:16PM -0500, Rob Herring wrote: > Convert the CoreSight CPU debug binding to DT schema format. > > Signed-off-by: Rob Herring <robh@kernel.org> Compared line by line between old DT binding and new yaml file, I found only one difference is in the new yaml file it doesn't contain below info for constraints CPU power states: "using "cpuidle.off=1" or "nohlt" in the kernel command line or sysfs node ..." IIUC, yaml file will be used not only for Linux kernel, thus it makes sense to remove the Linux specific info. Looks good to me: Reviewed-by: Leo Yan <leo.yan@linaro.org> ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 2/2] dt-bindings: arm: Convert CoreSight CPU debug to DT schema @ 2022-05-21 13:27 ` Leo Yan 0 siblings, 0 replies; 18+ messages in thread From: Leo Yan @ 2022-05-21 13:27 UTC (permalink / raw) To: Rob Herring Cc: Mathieu Poirier, Mike Leach, Suzuki K Poulose, Krzysztof Kozlowski, devicetree, linux-kernel, linux-arm-kernel On Fri, May 20, 2022 at 04:44:16PM -0500, Rob Herring wrote: > Convert the CoreSight CPU debug binding to DT schema format. > > Signed-off-by: Rob Herring <robh@kernel.org> Compared line by line between old DT binding and new yaml file, I found only one difference is in the new yaml file it doesn't contain below info for constraints CPU power states: "using "cpuidle.off=1" or "nohlt" in the kernel command line or sysfs node ..." IIUC, yaml file will be used not only for Linux kernel, thus it makes sense to remove the Linux specific info. Looks good to me: Reviewed-by: Leo Yan <leo.yan@linaro.org> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 2/2] dt-bindings: arm: Convert CoreSight CPU debug to DT schema 2022-05-20 21:44 ` Rob Herring @ 2022-05-21 14:47 ` Krzysztof Kozlowski -1 siblings, 0 replies; 18+ messages in thread From: Krzysztof Kozlowski @ 2022-05-21 14:47 UTC (permalink / raw) To: Rob Herring, Mathieu Poirier, Mike Leach, Leo Yan, Suzuki K Poulose, Krzysztof Kozlowski Cc: devicetree, linux-kernel, linux-arm-kernel On 20/05/2022 23:44, Rob Herring wrote: > Convert the CoreSight CPU debug binding to DT schema format. > > Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 2/2] dt-bindings: arm: Convert CoreSight CPU debug to DT schema @ 2022-05-21 14:47 ` Krzysztof Kozlowski 0 siblings, 0 replies; 18+ messages in thread From: Krzysztof Kozlowski @ 2022-05-21 14:47 UTC (permalink / raw) To: Rob Herring, Mathieu Poirier, Mike Leach, Leo Yan, Suzuki K Poulose, Krzysztof Kozlowski Cc: devicetree, linux-kernel, linux-arm-kernel On 20/05/2022 23:44, Rob Herring wrote: > Convert the CoreSight CPU debug binding to DT schema format. > > Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2022-05-23 13:58 UTC | newest] Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-05-20 21:44 [PATCH 0/2] dt-bindings: Arm CoreSight binding schema conversions Rob Herring 2022-05-20 21:44 ` Rob Herring 2022-05-20 21:44 ` [PATCH 1/2] dt-bindings: arm: Convert CoreSight bindings to DT schema Rob Herring 2022-05-20 21:44 ` Rob Herring 2022-05-21 14:54 ` Krzysztof Kozlowski 2022-05-21 14:54 ` Krzysztof Kozlowski 2022-05-23 12:53 ` Rob Herring 2022-05-23 12:53 ` Rob Herring 2022-05-23 11:03 ` Suzuki K Poulose 2022-05-23 11:03 ` Suzuki K Poulose 2022-05-23 13:57 ` Rob Herring 2022-05-23 13:57 ` Rob Herring 2022-05-20 21:44 ` [PATCH 2/2] dt-bindings: arm: Convert CoreSight CPU debug " Rob Herring 2022-05-20 21:44 ` Rob Herring 2022-05-21 13:27 ` Leo Yan 2022-05-21 13:27 ` Leo Yan 2022-05-21 14:47 ` Krzysztof Kozlowski 2022-05-21 14:47 ` Krzysztof Kozlowski
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.