[PATCH AUTOSEL 5.15 001/109] iommu/vt-d: Add RPLS to quirk list to skip TE disabling

[PATCH AUTOSEL 5.15 001/109] iommu/vt-d: Add RPLS to quirk list to skip TE disabling

[Sasha Levin]

From: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>

[ Upstream commit 0a967f5bfd9134b89681cae58deb222e20840e76 ]

The VT-d spec requires (10.4.4 Global Command Register, TE
field) that:

Hardware implementations supporting DMA draining must drain
any in-flight DMA read/write requests queued within the
Root-Complex before completing the translation enable
command and reflecting the status of the command through
the TES field in the Global Status register.

Unfortunately, some integrated graphic devices fail to do
so after some kind of power state transition. As the
result, the system might stuck in iommu_disable_translati
on(), waiting for the completion of TE transition.

This adds RPLS to a quirk list for those devices and skips
TE disabling if the qurik hits.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/4898
Tested-by: Raviteja Goud Talla <ravitejax.goud.talla@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302043256.191529-1-tejaskumarx.surendrakumar.upadhyay@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel/iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 91a5c75966f3..a1ffb3d6d901 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -5728,7 +5728,7 @@ static void quirk_igfx_skip_te_disable(struct pci_dev *dev)
 	ver = (dev->device >> 8) & 0xff;
 	if (ver != 0x45 && ver != 0x46 && ver != 0x4c &&
 	    ver != 0x4e && ver != 0x8a && ver != 0x98 &&
-	    ver != 0x9a)
+	    ver != 0x9a && ver != 0xa7)
 		return;
 
 	if (risky_device(dev))
-- 
2.35.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH AUTOSEL 5.15 001/109] iommu/vt-d: Add RPLS to quirk list to skip TE disabling

[Sasha Levin]

From: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>

[ Upstream commit 0a967f5bfd9134b89681cae58deb222e20840e76 ]

The VT-d spec requires (10.4.4 Global Command Register, TE
field) that:

Hardware implementations supporting DMA draining must drain
any in-flight DMA read/write requests queued within the
Root-Complex before completing the translation enable
command and reflecting the status of the command through
the TES field in the Global Status register.

Unfortunately, some integrated graphic devices fail to do
so after some kind of power state transition. As the
result, the system might stuck in iommu_disable_translati
on(), waiting for the completion of TE transition.

This adds RPLS to a quirk list for those devices and skips
TE disabling if the qurik hits.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/4898
Tested-by: Raviteja Goud Talla <ravitejax.goud.talla@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302043256.191529-1-tejaskumarx.surendrakumar.upadhyay@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel/iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 91a5c75966f3..a1ffb3d6d901 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -5728,7 +5728,7 @@ static void quirk_igfx_skip_te_disable(struct pci_dev *dev)
 	ver = (dev->device >> 8) & 0xff;
 	if (ver != 0x45 && ver != 0x46 && ver != 0x4c &&
 	    ver != 0x4e && ver != 0x8a && ver != 0x98 &&
-	    ver != 0x9a)
+	    ver != 0x9a && ver != 0xa7)
 		return;
 
 	if (risky_device(dev))
-- 
2.35.1

[PATCH AUTOSEL 5.15 002/109] drm/vmwgfx: validate the screen formats

[Sasha Levin]

From: Zack Rusin <zackr@vmware.com>

[ Upstream commit 8bb75aeb58bd688d70827ae179bd3da57b6d975b ]

The kms code wasn't validating the modifiers and was letting through
unsupported formats. rgb8 was never properly supported and has no
matching svga screen target format so remove it.
This fixes format/modifier failures in kms_addfb_basic from IGT.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-4-zack@kde.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 30 +++++++++++++++--------------
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.h |  1 -
 2 files changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 50c64e7813be..171e90c4b9f3 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -916,6 +916,15 @@ static int vmw_kms_new_framebuffer_surface(struct vmw_private *dev_priv,
 	 * Sanity checks.
 	 */
 
+	if (!drm_any_plane_has_format(&dev_priv->drm,
+				      mode_cmd->pixel_format,
+				      mode_cmd->modifier[0])) {
+		drm_dbg(&dev_priv->drm,
+			"unsupported pixel format %p4cc / modifier 0x%llx\n",
+			&mode_cmd->pixel_format, mode_cmd->modifier[0]);
+		return -EINVAL;
+	}
+
 	/* Surface must be marked as a scanout. */
 	if (unlikely(!surface->metadata.scanout))
 		return -EINVAL;
@@ -1229,20 +1238,13 @@ static int vmw_kms_new_framebuffer_bo(struct vmw_private *dev_priv,
 		return -EINVAL;
 	}
 
-	/* Limited framebuffer color depth support for screen objects */
-	if (dev_priv->active_display_unit == vmw_du_screen_object) {
-		switch (mode_cmd->pixel_format) {
-		case DRM_FORMAT_XRGB8888:
-		case DRM_FORMAT_ARGB8888:
-			break;
-		case DRM_FORMAT_XRGB1555:
-		case DRM_FORMAT_RGB565:
-			break;
-		default:
-			DRM_ERROR("Invalid pixel format: %p4cc\n",
-				  &mode_cmd->pixel_format);
-			return -EINVAL;
-		}
+	if (!drm_any_plane_has_format(&dev_priv->drm,
+				      mode_cmd->pixel_format,
+				      mode_cmd->modifier[0])) {
+		drm_dbg(&dev_priv->drm,
+			"unsupported pixel format %p4cc / modifier 0x%llx\n",
+			&mode_cmd->pixel_format, mode_cmd->modifier[0]);
+		return -EINVAL;
 	}
 
 	vfbd = kzalloc(sizeof(*vfbd), GFP_KERNEL);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
index bbc809f7bd8a..8c8ee87fd3ac 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
@@ -248,7 +248,6 @@ struct vmw_framebuffer_bo {
 static const uint32_t __maybe_unused vmw_primary_plane_formats[] = {
 	DRM_FORMAT_XRGB1555,
 	DRM_FORMAT_RGB565,
-	DRM_FORMAT_RGB888,
 	DRM_FORMAT_XRGB8888,
 	DRM_FORMAT_ARGB8888,
 };
-- 
2.35.1

[PATCH AUTOSEL 5.15 002/109] drm/vmwgfx: validate the screen formats

[Sasha Levin]

From: Zack Rusin <zackr@vmware.com>

[ Upstream commit 8bb75aeb58bd688d70827ae179bd3da57b6d975b ]

The kms code wasn't validating the modifiers and was letting through
unsupported formats. rgb8 was never properly supported and has no
matching svga screen target format so remove it.
This fixes format/modifier failures in kms_addfb_basic from IGT.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-4-zack@kde.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 30 +++++++++++++++--------------
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.h |  1 -
 2 files changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 50c64e7813be..171e90c4b9f3 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -916,6 +916,15 @@ static int vmw_kms_new_framebuffer_surface(struct vmw_private *dev_priv,
 	 * Sanity checks.
 	 */
 
+	if (!drm_any_plane_has_format(&dev_priv->drm,
+				      mode_cmd->pixel_format,
+				      mode_cmd->modifier[0])) {
+		drm_dbg(&dev_priv->drm,
+			"unsupported pixel format %p4cc / modifier 0x%llx\n",
+			&mode_cmd->pixel_format, mode_cmd->modifier[0]);
+		return -EINVAL;
+	}
+
 	/* Surface must be marked as a scanout. */
 	if (unlikely(!surface->metadata.scanout))
 		return -EINVAL;
@@ -1229,20 +1238,13 @@ static int vmw_kms_new_framebuffer_bo(struct vmw_private *dev_priv,
 		return -EINVAL;
 	}
 
-	/* Limited framebuffer color depth support for screen objects */
-	if (dev_priv->active_display_unit == vmw_du_screen_object) {
-		switch (mode_cmd->pixel_format) {
-		case DRM_FORMAT_XRGB8888:
-		case DRM_FORMAT_ARGB8888:
-			break;
-		case DRM_FORMAT_XRGB1555:
-		case DRM_FORMAT_RGB565:
-			break;
-		default:
-			DRM_ERROR("Invalid pixel format: %p4cc\n",
-				  &mode_cmd->pixel_format);
-			return -EINVAL;
-		}
+	if (!drm_any_plane_has_format(&dev_priv->drm,
+				      mode_cmd->pixel_format,
+				      mode_cmd->modifier[0])) {
+		drm_dbg(&dev_priv->drm,
+			"unsupported pixel format %p4cc / modifier 0x%llx\n",
+			&mode_cmd->pixel_format, mode_cmd->modifier[0]);
+		return -EINVAL;
 	}
 
 	vfbd = kzalloc(sizeof(*vfbd), GFP_KERNEL);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
index bbc809f7bd8a..8c8ee87fd3ac 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
@@ -248,7 +248,6 @@ struct vmw_framebuffer_bo {
 static const uint32_t __maybe_unused vmw_primary_plane_formats[] = {
 	DRM_FORMAT_XRGB1555,
 	DRM_FORMAT_RGB565,
-	DRM_FORMAT_RGB888,
 	DRM_FORMAT_XRGB8888,
 	DRM_FORMAT_ARGB8888,
 };
-- 
2.35.1

[PATCH AUTOSEL 5.15 003/109] drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes

[Sasha Levin]

From: Liu Zixian <liuzixian4@huawei.com>

[ Upstream commit 194d250cdc4a40ccbd179afd522a9e9846957402 ]

drm_cvt_mode may return NULL and we should check it.

This bug is found by syzkaller:

FAULT_INJECTION stacktrace:
[  168.567394] FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
[  168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567408] Call trace:
[  168.567414]  dump_backtrace+0x0/0x310
[  168.567418]  show_stack+0x28/0x38
[  168.567423]  dump_stack+0xec/0x15c
[  168.567427]  should_fail+0x3ac/0x3d0
[  168.567437]  __should_failslab+0xb8/0x120
[  168.567441]  should_failslab+0x28/0xc0
[  168.567445]  kmem_cache_alloc_trace+0x50/0x640
[  168.567454]  drm_mode_create+0x40/0x90
[  168.567458]  drm_cvt_mode+0x48/0xc78
[  168.567477]  virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu]
[  168.567485]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567492]  drm_mode_getconnector+0x2e0/0xa70
[  168.567496]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567514]  drm_ioctl+0x558/0x6d0
[  168.567522]  do_vfs_ioctl+0x160/0xf30
[  168.567525]  ksys_ioctl+0x98/0xd8
[  168.567530]  __arm64_sys_ioctl+0x50/0xc8
[  168.567536]  el0_svc_common+0xc8/0x320
[  168.567540]  el0_svc_handler+0xf8/0x160
[  168.567544]  el0_svc+0x10/0x218

KASAN stacktrace:
[  168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425
[  168.567566]
[  168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567575] Call trace:
[  168.567578]  dump_backtrace+0x0/0x310
[  168.567582]  show_stack+0x28/0x38
[  168.567586]  dump_stack+0xec/0x15c
[  168.567591]  kasan_report+0x244/0x2f0
[  168.567594]  __asan_load4+0x58/0xb0
[  168.567607]  virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567612]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567617]  drm_mode_getconnector+0x2e0/0xa70
[  168.567621]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567624]  drm_ioctl+0x558/0x6d0
[  168.567628]  do_vfs_ioctl+0x160/0xf30
[  168.567632]  ksys_ioctl+0x98/0xd8
[  168.567636]  __arm64_sys_ioctl+0x50/0xc8
[  168.567641]  el0_svc_common+0xc8/0x320
[  168.567645]  el0_svc_handler+0xf8/0x160
[  168.567649]  el0_svc+0x10/0x218

Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian4@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/virtio/virtgpu_display.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c
index a6caebd4a0dd..ef1f19083cd3 100644
--- a/drivers/gpu/drm/virtio/virtgpu_display.c
+++ b/drivers/gpu/drm/virtio/virtgpu_display.c
@@ -179,6 +179,8 @@ static int virtio_gpu_conn_get_modes(struct drm_connector *connector)
 		DRM_DEBUG("add mode: %dx%d\n", width, height);
 		mode = drm_cvt_mode(connector->dev, width, height, 60,
 				    false, false, false);
+		if (!mode)
+			return count;
 		mode->type |= DRM_MODE_TYPE_PREFERRED;
 		drm_mode_probed_add(connector, mode);
 		count++;
-- 
2.35.1

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH AUTOSEL 5.15 003/109] drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes

[Sasha Levin]

From: Liu Zixian <liuzixian4@huawei.com>

[ Upstream commit 194d250cdc4a40ccbd179afd522a9e9846957402 ]

drm_cvt_mode may return NULL and we should check it.

This bug is found by syzkaller:

FAULT_INJECTION stacktrace:
[  168.567394] FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
[  168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567408] Call trace:
[  168.567414]  dump_backtrace+0x0/0x310
[  168.567418]  show_stack+0x28/0x38
[  168.567423]  dump_stack+0xec/0x15c
[  168.567427]  should_fail+0x3ac/0x3d0
[  168.567437]  __should_failslab+0xb8/0x120
[  168.567441]  should_failslab+0x28/0xc0
[  168.567445]  kmem_cache_alloc_trace+0x50/0x640
[  168.567454]  drm_mode_create+0x40/0x90
[  168.567458]  drm_cvt_mode+0x48/0xc78
[  168.567477]  virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu]
[  168.567485]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567492]  drm_mode_getconnector+0x2e0/0xa70
[  168.567496]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567514]  drm_ioctl+0x558/0x6d0
[  168.567522]  do_vfs_ioctl+0x160/0xf30
[  168.567525]  ksys_ioctl+0x98/0xd8
[  168.567530]  __arm64_sys_ioctl+0x50/0xc8
[  168.567536]  el0_svc_common+0xc8/0x320
[  168.567540]  el0_svc_handler+0xf8/0x160
[  168.567544]  el0_svc+0x10/0x218

KASAN stacktrace:
[  168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425
[  168.567566]
[  168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567575] Call trace:
[  168.567578]  dump_backtrace+0x0/0x310
[  168.567582]  show_stack+0x28/0x38
[  168.567586]  dump_stack+0xec/0x15c
[  168.567591]  kasan_report+0x244/0x2f0
[  168.567594]  __asan_load4+0x58/0xb0
[  168.567607]  virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567612]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567617]  drm_mode_getconnector+0x2e0/0xa70
[  168.567621]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567624]  drm_ioctl+0x558/0x6d0
[  168.567628]  do_vfs_ioctl+0x160/0xf30
[  168.567632]  ksys_ioctl+0x98/0xd8
[  168.567636]  __arm64_sys_ioctl+0x50/0xc8
[  168.567641]  el0_svc_common+0xc8/0x320
[  168.567645]  el0_svc_handler+0xf8/0x160
[  168.567649]  el0_svc+0x10/0x218

Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian4@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/virtio/virtgpu_display.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c
index a6caebd4a0dd..ef1f19083cd3 100644
--- a/drivers/gpu/drm/virtio/virtgpu_display.c
+++ b/drivers/gpu/drm/virtio/virtgpu_display.c
@@ -179,6 +179,8 @@ static int virtio_gpu_conn_get_modes(struct drm_connector *connector)
 		DRM_DEBUG("add mode: %dx%d\n", width, height);
 		mode = drm_cvt_mode(connector->dev, width, height, 60,
 				    false, false, false);
+		if (!mode)
+			return count;
 		mode->type |= DRM_MODE_TYPE_PREFERRED;
 		drm_mode_probed_add(connector, mode);
 		count++;
-- 
2.35.1

[PATCH AUTOSEL 5.15 003/109] drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes

[Sasha Levin]

From: Liu Zixian <liuzixian4@huawei.com>

[ Upstream commit 194d250cdc4a40ccbd179afd522a9e9846957402 ]

drm_cvt_mode may return NULL and we should check it.

This bug is found by syzkaller:

FAULT_INJECTION stacktrace:
[  168.567394] FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
[  168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567408] Call trace:
[  168.567414]  dump_backtrace+0x0/0x310
[  168.567418]  show_stack+0x28/0x38
[  168.567423]  dump_stack+0xec/0x15c
[  168.567427]  should_fail+0x3ac/0x3d0
[  168.567437]  __should_failslab+0xb8/0x120
[  168.567441]  should_failslab+0x28/0xc0
[  168.567445]  kmem_cache_alloc_trace+0x50/0x640
[  168.567454]  drm_mode_create+0x40/0x90
[  168.567458]  drm_cvt_mode+0x48/0xc78
[  168.567477]  virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu]
[  168.567485]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567492]  drm_mode_getconnector+0x2e0/0xa70
[  168.567496]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567514]  drm_ioctl+0x558/0x6d0
[  168.567522]  do_vfs_ioctl+0x160/0xf30
[  168.567525]  ksys_ioctl+0x98/0xd8
[  168.567530]  __arm64_sys_ioctl+0x50/0xc8
[  168.567536]  el0_svc_common+0xc8/0x320
[  168.567540]  el0_svc_handler+0xf8/0x160
[  168.567544]  el0_svc+0x10/0x218

KASAN stacktrace:
[  168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425
[  168.567566]
[  168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567575] Call trace:
[  168.567578]  dump_backtrace+0x0/0x310
[  168.567582]  show_stack+0x28/0x38
[  168.567586]  dump_stack+0xec/0x15c
[  168.567591]  kasan_report+0x244/0x2f0
[  168.567594]  __asan_load4+0x58/0xb0
[  168.567607]  virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567612]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567617]  drm_mode_getconnector+0x2e0/0xa70
[  168.567621]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567624]  drm_ioctl+0x558/0x6d0
[  168.567628]  do_vfs_ioctl+0x160/0xf30
[  168.567632]  ksys_ioctl+0x98/0xd8
[  168.567636]  __arm64_sys_ioctl+0x50/0xc8
[  168.567641]  el0_svc_common+0xc8/0x320
[  168.567645]  el0_svc_handler+0xf8/0x160
[  168.567649]  el0_svc+0x10/0x218

Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian4@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/virtio/virtgpu_display.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c
index a6caebd4a0dd..ef1f19083cd3 100644
--- a/drivers/gpu/drm/virtio/virtgpu_display.c
+++ b/drivers/gpu/drm/virtio/virtgpu_display.c
@@ -179,6 +179,8 @@ static int virtio_gpu_conn_get_modes(struct drm_connector *connector)
 		DRM_DEBUG("add mode: %dx%d\n", width, height);
 		mode = drm_cvt_mode(connector->dev, width, height, 60,
 				    false, false, false);
+		if (!mode)
+			return count;
 		mode->type |= DRM_MODE_TYPE_PREFERRED;
 		drm_mode_probed_add(connector, mode);
 		count++;
-- 
2.35.1

[PATCH AUTOSEL 5.15 004/109] selftests/bpf: Fix vfs_link kprobe definition

[Sasha Levin]

From: Nikolay Borisov <nborisov@suse.com>

[ Upstream commit e299bcd4d16ff86f46c48df1062c8aae0eca1ed8 ]

Since commit 6521f8917082 ("namei: prepare for idmapped mounts")
vfs_link's prototype was changed, the kprobe definition in
profiler selftest in turn wasn't updated. The result is that all
argument after the first are now stored in different registers. This
means that self-test has been broken ever since. Fix it by updating the
kprobe definition accordingly.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220331140949.1410056-1-nborisov@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/progs/profiler.inc.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/bpf/progs/profiler.inc.h b/tools/testing/selftests/bpf/progs/profiler.inc.h
index 4896fdf816f7..92331053dba3 100644
--- a/tools/testing/selftests/bpf/progs/profiler.inc.h
+++ b/tools/testing/selftests/bpf/progs/profiler.inc.h
@@ -826,8 +826,9 @@ int kprobe_ret__do_filp_open(struct pt_regs* ctx)
 
 SEC("kprobe/vfs_link")
 int BPF_KPROBE(kprobe__vfs_link,
-	       struct dentry* old_dentry, struct inode* dir,
-	       struct dentry* new_dentry, struct inode** delegated_inode)
+	       struct dentry* old_dentry, struct user_namespace *mnt_userns,
+	       struct inode* dir, struct dentry* new_dentry,
+	       struct inode** delegated_inode)
 {
 	struct bpf_func_stats_ctx stats_ctx;
 	bpf_stats_enter(&stats_ctx, profiler_bpf_vfs_link);
-- 
2.35.1

[PATCH AUTOSEL 5.15 005/109] selftests/bpf: Fix parsing of prog types in UAPI hdr for bpftool sync

[Sasha Levin]

From: Quentin Monnet <quentin@isovalent.com>

[ Upstream commit 4eeebce6ac4ad80ee8243bb847c98e0e55848d47 ]

The script for checking that various lists of types in bpftool remain in
sync with the UAPI BPF header uses a regex to parse enum bpf_prog_type.
If this enum contains a set of values different from the list of program
types in bpftool, it complains.

This script should have reported the addition, some time ago, of the new
BPF_PROG_TYPE_SYSCALL, which was not reported to bpftool's program types
list. It failed to do so, because it failed to parse that new type from
the enum. This is because the new value, in the BPF header, has an
explicative comment on the same line, and the regex does not support
that.

Let's update the script to support parsing enum values when they have
comments on the same line.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220404140944.64744-1-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_bpftool_synctypes.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/test_bpftool_synctypes.py b/tools/testing/selftests/bpf/test_bpftool_synctypes.py
index be54b7335a76..5717db4e0862 100755
--- a/tools/testing/selftests/bpf/test_bpftool_synctypes.py
+++ b/tools/testing/selftests/bpf/test_bpftool_synctypes.py
@@ -172,7 +172,7 @@ class FileExtractor(object):
         @enum_name: name of the enum to parse
         """
         start_marker = re.compile(f'enum {enum_name} {{\n')
-        pattern = re.compile('^\s*(BPF_\w+),?$')
+        pattern = re.compile('^\s*(BPF_\w+),?(\s+/\*.*\*/)?$')
         end_marker = re.compile('^};')
         parser = BlockParser(self.reader)
         parser.search_block(start_marker)
-- 
2.35.1

[PATCH AUTOSEL 5.15 006/109] mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue

[Sasha Levin]

From: Niels Dossche <dossche.niels@gmail.com>

[ Upstream commit 3e12968f6d12a34b540c39cbd696a760cc4616f0 ]

cfg80211_ch_switch_notify uses ASSERT_WDEV_LOCK to assert that
net_device->ieee80211_ptr->mtx (which is the same as priv->wdev.mtx)
is held during the function's execution.
mwifiex_dfs_chan_sw_work_queue is one of its callers, which does not
hold that lock, therefore violating the assertion.
Add a lock around the call.

Disclaimer:
I am currently working on a static analyser to detect missing locks.
This was a reported case. I manually verified the report by looking
at the code, so that I do not send wrong information or patches.
After concluding that this seems to be a true positive, I created
this patch.
However, as I do not in fact have this particular hardware,
I was unable to test it.

Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220321225515.32113-1-dossche.niels@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/11h.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/11h.c b/drivers/net/wireless/marvell/mwifiex/11h.c
index d2ee6469e67b..3fa25cd64cda 100644
--- a/drivers/net/wireless/marvell/mwifiex/11h.c
+++ b/drivers/net/wireless/marvell/mwifiex/11h.c
@@ -303,5 +303,7 @@ void mwifiex_dfs_chan_sw_work_queue(struct work_struct *work)
 
 	mwifiex_dbg(priv->adapter, MSG,
 		    "indicating channel switch completion to kernel\n");
+	mutex_lock(&priv->wdev.mtx);
 	cfg80211_ch_switch_notify(priv->netdev, &priv->dfs_chandef);
+	mutex_unlock(&priv->wdev.mtx);
 }
-- 
2.35.1

[PATCH AUTOSEL 5.15 007/109] b43legacy: Fix assigning negative value to unsigned variable

[Sasha Levin]

From: Haowen Bai <baihaowen@meizu.com>

[ Upstream commit 3f6b867559b3d43a7ce1b4799b755e812fc0d503 ]

fix warning reported by smatch:
drivers/net/wireless/broadcom/b43legacy/phy.c:1181 b43legacy_phy_lo_b_measure()
warn: assigning (-772) to unsigned variable 'fval'

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648203433-8736-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43legacy/phy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43legacy/phy.c b/drivers/net/wireless/broadcom/b43legacy/phy.c
index 05404fbd1e70..c1395e622759 100644
--- a/drivers/net/wireless/broadcom/b43legacy/phy.c
+++ b/drivers/net/wireless/broadcom/b43legacy/phy.c
@@ -1123,7 +1123,7 @@ void b43legacy_phy_lo_b_measure(struct b43legacy_wldev *dev)
 	struct b43legacy_phy *phy = &dev->phy;
 	u16 regstack[12] = { 0 };
 	u16 mls;
-	u16 fval;
+	s16 fval;
 	int i;
 	int j;
 
-- 
2.35.1


_______________________________________________
b43-dev mailing list
b43-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/b43-dev

[PATCH AUTOSEL 5.15 007/109] b43legacy: Fix assigning negative value to unsigned variable

[Sasha Levin]

From: Haowen Bai <baihaowen@meizu.com>

[ Upstream commit 3f6b867559b3d43a7ce1b4799b755e812fc0d503 ]

fix warning reported by smatch:
drivers/net/wireless/broadcom/b43legacy/phy.c:1181 b43legacy_phy_lo_b_measure()
warn: assigning (-772) to unsigned variable 'fval'

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648203433-8736-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43legacy/phy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43legacy/phy.c b/drivers/net/wireless/broadcom/b43legacy/phy.c
index 05404fbd1e70..c1395e622759 100644
--- a/drivers/net/wireless/broadcom/b43legacy/phy.c
+++ b/drivers/net/wireless/broadcom/b43legacy/phy.c
@@ -1123,7 +1123,7 @@ void b43legacy_phy_lo_b_measure(struct b43legacy_wldev *dev)
 	struct b43legacy_phy *phy = &dev->phy;
 	u16 regstack[12] = { 0 };
 	u16 mls;
-	u16 fval;
+	s16 fval;
 	int i;
 	int j;
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 008/109] b43: Fix assigning negative value to unsigned variable

[Sasha Levin]

From: Haowen Bai <baihaowen@meizu.com>

[ Upstream commit 11800d893b38e0e12d636c170c1abc19c43c730c ]

fix warning reported by smatch:
drivers/net/wireless/broadcom/b43/phy_n.c:585 b43_nphy_adjust_lna_gain_table()
warn: assigning (-2) to unsigned variable '*(lna_gain[0])'

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648203315-28093-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/phy_n.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43/phy_n.c b/drivers/net/wireless/broadcom/b43/phy_n.c
index cf3ccf4ddfe7..aa5c99465674 100644
--- a/drivers/net/wireless/broadcom/b43/phy_n.c
+++ b/drivers/net/wireless/broadcom/b43/phy_n.c
@@ -582,7 +582,7 @@ static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
 	u16 data[4];
 	s16 gain[2];
 	u16 minmax[2];
-	static const u16 lna_gain[4] = { -2, 10, 19, 25 };
+	static const s16 lna_gain[4] = { -2, 10, 19, 25 };
 
 	if (nphy->hang_avoid)
 		b43_nphy_stay_in_carrier_search(dev, 1);
-- 
2.35.1


_______________________________________________
b43-dev mailing list
b43-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/b43-dev

[PATCH AUTOSEL 5.15 008/109] b43: Fix assigning negative value to unsigned variable

[Sasha Levin]

From: Haowen Bai <baihaowen@meizu.com>

[ Upstream commit 11800d893b38e0e12d636c170c1abc19c43c730c ]

fix warning reported by smatch:
drivers/net/wireless/broadcom/b43/phy_n.c:585 b43_nphy_adjust_lna_gain_table()
warn: assigning (-2) to unsigned variable '*(lna_gain[0])'

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648203315-28093-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/phy_n.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43/phy_n.c b/drivers/net/wireless/broadcom/b43/phy_n.c
index cf3ccf4ddfe7..aa5c99465674 100644
--- a/drivers/net/wireless/broadcom/b43/phy_n.c
+++ b/drivers/net/wireless/broadcom/b43/phy_n.c
@@ -582,7 +582,7 @@ static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
 	u16 data[4];
 	s16 gain[2];
 	u16 minmax[2];
-	static const u16 lna_gain[4] = { -2, 10, 19, 25 };
+	static const s16 lna_gain[4] = { -2, 10, 19, 25 };
 
 	if (nphy->hang_avoid)
 		b43_nphy_stay_in_carrier_search(dev, 1);
-- 
2.35.1

[PATCH AUTOSEL 5.15 009/109] ipw2x00: Fix potential NULL dereference in libipw_xmit()

[Sasha Levin]

From: Haowen Bai <baihaowen@meizu.com>

[ Upstream commit e8366bbabe1d207cf7c5b11ae50e223ae6fc278b ]

crypt and crypt->ops could be null, so we need to checking null
before dereference

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648797055-25730-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/ipw2x00/libipw_tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c
index 36d1e6b2568d..4aec1fce1ae2 100644
--- a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c
+++ b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c
@@ -383,7 +383,7 @@ netdev_tx_t libipw_xmit(struct sk_buff *skb, struct net_device *dev)
 
 		/* Each fragment may need to have room for encryption
 		 * pre/postfix */
-		if (host_encrypt)
+		if (host_encrypt && crypt && crypt->ops)
 			bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
 			    crypt->ops->extra_mpdu_postfix_len;
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 010/109] ipv6: fix locking issues with loops over idev->addr_list

[Sasha Levin]

From: Niels Dossche <dossche.niels@gmail.com>

[ Upstream commit 51454ea42c1ab4e0c2828bb0d4d53957976980de ]

idev->addr_list needs to be protected by idev->lock. However, it is not
always possible to do so while iterating and performing actions on
inet6_ifaddr instances. For example, multiple functions (like
addrconf_{join,leave}_anycast) eventually call down to other functions
that acquire the idev->lock. The current code temporarily unlocked the
idev->lock during the loops, which can cause race conditions. Moving the
locks up is also not an appropriate solution as the ordering of lock
acquisition will be inconsistent with for example mc_lock.

This solution adds an additional field to inet6_ifaddr that is used
to temporarily add the instances to a temporary list while holding
idev->lock. The temporary list can then be traversed without holding
idev->lock. This change was done in two places. In addrconf_ifdown, the
list_for_each_entry_safe variant of the list loop is also no longer
necessary as there is no deletion within that specific loop.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220403231523.45843-1-dossche.niels@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/if_inet6.h |  8 ++++++++
 net/ipv6/addrconf.c    | 30 ++++++++++++++++++++++++------
 2 files changed, 32 insertions(+), 6 deletions(-)

diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index 653e7d0f65cb..8ec0878a90a7 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -64,6 +64,14 @@ struct inet6_ifaddr {
 
 	struct hlist_node	addr_lst;
 	struct list_head	if_list;
+	/*
+	 * Used to safely traverse idev->addr_list in process context
+	 * if the idev->lock needed to protect idev->addr_list cannot be held.
+	 * In that case, add the items to this list temporarily and iterate
+	 * without holding idev->lock.
+	 * See addrconf_ifdown and dev_forward_change.
+	 */
+	struct list_head	if_list_aux;
 
 	struct list_head	tmp_list;
 	struct inet6_ifaddr	*ifpub;
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 3a8838b79bb6..1ba5ff21412c 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -798,6 +798,7 @@ static void dev_forward_change(struct inet6_dev *idev)
 {
 	struct net_device *dev;
 	struct inet6_ifaddr *ifa;
+	LIST_HEAD(tmp_addr_list);
 
 	if (!idev)
 		return;
@@ -816,14 +817,24 @@ static void dev_forward_change(struct inet6_dev *idev)
 		}
 	}
 
+	read_lock_bh(&idev->lock);
 	list_for_each_entry(ifa, &idev->addr_list, if_list) {
 		if (ifa->flags&IFA_F_TENTATIVE)
 			continue;
+		list_add_tail(&ifa->if_list_aux, &tmp_addr_list);
+	}
+	read_unlock_bh(&idev->lock);
+
+	while (!list_empty(&tmp_addr_list)) {
+		ifa = list_first_entry(&tmp_addr_list,
+				       struct inet6_ifaddr, if_list_aux);
+		list_del(&ifa->if_list_aux);
 		if (idev->cnf.forwarding)
 			addrconf_join_anycast(ifa);
 		else
 			addrconf_leave_anycast(ifa);
 	}
+
 	inet6_netconf_notify_devconf(dev_net(dev), RTM_NEWNETCONF,
 				     NETCONFA_FORWARDING,
 				     dev->ifindex, &idev->cnf);
@@ -3728,7 +3739,8 @@ static int addrconf_ifdown(struct net_device *dev, bool unregister)
 	unsigned long event = unregister ? NETDEV_UNREGISTER : NETDEV_DOWN;
 	struct net *net = dev_net(dev);
 	struct inet6_dev *idev;
-	struct inet6_ifaddr *ifa, *tmp;
+	struct inet6_ifaddr *ifa;
+	LIST_HEAD(tmp_addr_list);
 	bool keep_addr = false;
 	bool was_ready;
 	int state, i;
@@ -3820,16 +3832,23 @@ static int addrconf_ifdown(struct net_device *dev, bool unregister)
 		write_lock_bh(&idev->lock);
 	}
 
-	list_for_each_entry_safe(ifa, tmp, &idev->addr_list, if_list) {
+	list_for_each_entry(ifa, &idev->addr_list, if_list)
+		list_add_tail(&ifa->if_list_aux, &tmp_addr_list);
+	write_unlock_bh(&idev->lock);
+
+	while (!list_empty(&tmp_addr_list)) {
 		struct fib6_info *rt = NULL;
 		bool keep;
 
+		ifa = list_first_entry(&tmp_addr_list,
+				       struct inet6_ifaddr, if_list_aux);
+		list_del(&ifa->if_list_aux);
+
 		addrconf_del_dad_work(ifa);
 
 		keep = keep_addr && (ifa->flags & IFA_F_PERMANENT) &&
 			!addr_is_local(&ifa->addr);
 
-		write_unlock_bh(&idev->lock);
 		spin_lock_bh(&ifa->lock);
 
 		if (keep) {
@@ -3860,15 +3879,14 @@ static int addrconf_ifdown(struct net_device *dev, bool unregister)
 			addrconf_leave_solict(ifa->idev, &ifa->addr);
 		}
 
-		write_lock_bh(&idev->lock);
 		if (!keep) {
+			write_lock_bh(&idev->lock);
 			list_del_rcu(&ifa->if_list);
+			write_unlock_bh(&idev->lock);
 			in6_ifa_put(ifa);
 		}
 	}
 
-	write_unlock_bh(&idev->lock);
-
 	/* Step 5: Discard anycast and multicast list */
 	if (unregister) {
 		ipv6_ac_destroy_dev(idev);
-- 
2.35.1

[PATCH AUTOSEL 5.15 011/109] fbcon: Consistently protect deferred_takeover with console_lock()

[Sasha Levin]

From: Daniel Vetter <daniel.vetter@ffwll.ch>

[ Upstream commit 43553559121ca90965b572cf8a1d6d0fd618b449 ]

This shouldn't be a problem in practice since until we've actually
taken over the console there's nothing we've registered with the
console/vt subsystem, so the exit/unbind path that check this can't
do the wrong thing. But it's confusing, so fix it by moving it a tad
later.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-14-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/fbcon.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index a53c1f6906f0..a25b63b56223 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -3265,6 +3265,9 @@ static void fbcon_register_existing_fbs(struct work_struct *work)
 
 	console_lock();
 
+	deferred_takeover = false;
+	logo_shown = FBCON_LOGO_DONTSHOW;
+
 	for_each_registered_fb(i)
 		fbcon_fb_registered(registered_fb[i]);
 
@@ -3282,8 +3285,6 @@ static int fbcon_output_notifier(struct notifier_block *nb,
 	pr_info("fbcon: Taking over console\n");
 
 	dummycon_unregister_output_notifier(&fbcon_output_nb);
-	deferred_takeover = false;
-	logo_shown = FBCON_LOGO_DONTSHOW;
 
 	/* We may get called in atomic context */
 	schedule_work(&fbcon_deferred_takeover_work);
-- 
2.35.1

[PATCH AUTOSEL 5.15 011/109] fbcon: Consistently protect deferred_takeover with console_lock()

[Sasha Levin]

From: Daniel Vetter <daniel.vetter@ffwll.ch>

[ Upstream commit 43553559121ca90965b572cf8a1d6d0fd618b449 ]

This shouldn't be a problem in practice since until we've actually
taken over the console there's nothing we've registered with the
console/vt subsystem, so the exit/unbind path that check this can't
do the wrong thing. But it's confusing, so fix it by moving it a tad
later.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-14-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/fbcon.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index a53c1f6906f0..a25b63b56223 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -3265,6 +3265,9 @@ static void fbcon_register_existing_fbs(struct work_struct *work)
 
 	console_lock();
 
+	deferred_takeover = false;
+	logo_shown = FBCON_LOGO_DONTSHOW;
+
 	for_each_registered_fb(i)
 		fbcon_fb_registered(registered_fb[i]);
 
@@ -3282,8 +3285,6 @@ static int fbcon_output_notifier(struct notifier_block *nb,
 	pr_info("fbcon: Taking over console\n");
 
 	dummycon_unregister_output_notifier(&fbcon_output_nb);
-	deferred_takeover = false;
-	logo_shown = FBCON_LOGO_DONTSHOW;
 
 	/* We may get called in atomic context */
 	schedule_work(&fbcon_deferred_takeover_work);
-- 
2.35.1

[PATCH AUTOSEL 5.15 012/109] x86/platform/uv: Update TSC sync state for UV5

[Sasha Levin]

From: Mike Travis <mike.travis@hpe.com>

[ Upstream commit bb3ab81bdbd53f88f26ffabc9fb15bd8466486ec ]

The UV5 platform synchronizes the TSCs among all chassis, and will not
proceed to OS boot without achieving synchronization.  Previous UV
platforms provided a register indicating successful synchronization.
This is no longer available on UV5.  On this platform TSC_ADJUST
should not be reset by the kernel.

Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220406195149.228164-3-steve.wahl@hpe.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/apic/x2apic_uv_x.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index f5a48e66e4f5..a6e9c2794ef5 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -199,7 +199,13 @@ static void __init uv_tsc_check_sync(void)
 	int mmr_shift;
 	char *state;
 
-	/* Different returns from different UV BIOS versions */
+	/* UV5 guarantees synced TSCs; do not zero TSC_ADJUST */
+	if (!is_uv(UV2|UV3|UV4)) {
+		mark_tsc_async_resets("UV5+");
+		return;
+	}
+
+	/* UV2,3,4, UV BIOS TSC sync state available */
 	mmr = uv_early_read_mmr(UVH_TSC_SYNC_MMR);
 	mmr_shift =
 		is_uv2_hub() ? UVH_TSC_SYNC_SHIFT_UV2K : UVH_TSC_SYNC_SHIFT;
-- 
2.35.1

[PATCH AUTOSEL 5.15 013/109] ACPICA: Avoid cache flush inside virtual machines

[Sasha Levin]

From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>

[ Upstream commit e2efb6359e620521d1e13f69b2257de8ceaa9475 ]

While running inside virtual machine, the kernel can bypass cache
flushing. Changing sleep state in a virtual machine doesn't affect the
host system sleep state and cannot lead to data loss.

Before entering sleep states, the ACPI code flushes caches to prevent
data loss using the WBINVD instruction.  This mechanism is required on
bare metal.

But, any use WBINVD inside of a guest is worthless.  Changing sleep
state in a virtual machine doesn't affect the host system sleep state
and cannot lead to data loss, so most hypervisors simply ignore it.
Despite this, the ACPI code calls WBINVD unconditionally anyway.
It's useless, but also normally harmless.

In TDX guests, though, WBINVD stops being harmless; it triggers a
virtualization exception (#VE).  If the ACPI cache-flushing WBINVD
were left in place, TDX guests would need handling to recover from
the exception.

Avoid using WBINVD whenever running under a hypervisor.  This both
removes the useless WBINVDs and saves TDX from implementing WBINVD
handling.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-30-kirill.shutemov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/acenv.h | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/acenv.h b/arch/x86/include/asm/acenv.h
index 9aff97f0de7f..d937c55e717e 100644
--- a/arch/x86/include/asm/acenv.h
+++ b/arch/x86/include/asm/acenv.h
@@ -13,7 +13,19 @@
 
 /* Asm macros */
 
-#define ACPI_FLUSH_CPU_CACHE()	wbinvd()
+/*
+ * ACPI_FLUSH_CPU_CACHE() flushes caches on entering sleep states.
+ * It is required to prevent data loss.
+ *
+ * While running inside virtual machine, the kernel can bypass cache flushing.
+ * Changing sleep state in a virtual machine doesn't affect the host system
+ * sleep state and cannot lead to data loss.
+ */
+#define ACPI_FLUSH_CPU_CACHE()					\
+do {								\
+	if (!cpu_feature_enabled(X86_FEATURE_HYPERVISOR))	\
+		wbinvd();					\
+} while (0)
 
 int __acpi_acquire_global_lock(unsigned int *lock);
 int __acpi_release_global_lock(unsigned int *lock);
-- 
2.35.1

[PATCH AUTOSEL 5.15 014/109] mac80211: minstrel_ht: fix where rate stats are stored (fixes debugfs output)

[Sasha Levin]

From: Peter Seiderer <ps.report@gmx.net>

[ Upstream commit 5c6dd7bd569b54c0d2904125d7366aa93f077f67 ]

Using an ath9k card the debugfs output of minstrel_ht looks like the following
(note the zero values for the first four rates sum-of success/attempts):

             best    ____________rate__________    ____statistics___    _____last____    ______sum-of________
mode guard #  rate   [name   idx airtime  max_tp]  [avg(tp) avg(prob)]  [retry|suc|att]  [#success | #attempts]
OFDM       1    DP     6.0M  272    1640     5.2       3.1      53.8       3     0 0             0   0
OFDM       1   C       9.0M  273    1104     7.7       4.6      53.8       4     0 0             0   0
OFDM       1  B       12.0M  274     836    10.0       6.0      53.8       4     0 0             0   0
OFDM       1 A    S   18.0M  275     568    14.3       8.5      53.8       5     0 0             0   0
OFDM       1      S   24.0M  276     436    18.1       0.0       0.0       5     0 1            80   1778
OFDM       1          36.0M  277     300    24.9       0.0       0.0       0     0 1             0   107
OFDM       1      S   48.0M  278     236    30.4       0.0       0.0       0     0 0             0   75
OFDM       1          54.0M  279     212    33.0       0.0       0.0       0     0 0             0   72

Total packet count::    ideal 16582      lookaround 885
Average # of aggregated frames per A-MPDU: 1.0

Debugging showed that the rate statistics for the first four rates where
stored in the MINSTREL_CCK_GROUP instead of the MINSTREL_OFDM_GROUP because
in minstrel_ht_get_stats() the supported check was not honoured as done in
various other places, e.g net/mac80211/rc80211_minstrel_ht_debugfs.c:

 74                 if (!(mi->supported[i] & BIT(j)))
 75                         continue;

With the patch applied the output looks good:

              best    ____________rate__________    ____statistics___    _____last____    ______sum-of________
mode guard #  rate   [name   idx airtime  max_tp]  [avg(tp) avg(prob)]  [retry|suc|att]  [#success | #attempts]
OFDM       1    D      6.0M  272    1640     5.2       5.2     100.0       3     0 0             1   1
OFDM       1   C       9.0M  273    1104     7.7       7.7     100.0       4     0 0            38   38
OFDM       1  B       12.0M  274     836    10.0       9.9      89.5       4     2 2           372   395
OFDM       1 A   P    18.0M  275     568    14.3      14.3      97.2       5    52 53         6956   7181
OFDM       1      S   24.0M  276     436    18.1       0.0       0.0       0     0 1             6   163
OFDM       1          36.0M  277     300    24.9       0.0       0.0       0     0 1             0   35
OFDM       1      S   48.0M  278     236    30.4       0.0       0.0       0     0 0             0   38
OFDM       1      S   54.0M  279     212    33.0       0.0       0.0       0     0 0             0   38

Total packet count::    ideal 7097      lookaround 287
Average # of aggregated frames per A-MPDU: 1.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Link: https://lore.kernel.org/r/20220404165414.1036-1-ps.report@gmx.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rc80211_minstrel_ht.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 72b44d4c42d0..90238170dec3 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -364,6 +364,9 @@ minstrel_ht_get_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
 
 	group = MINSTREL_CCK_GROUP;
 	for (idx = 0; idx < ARRAY_SIZE(mp->cck_rates); idx++) {
+		if (!(mi->supported[group] & BIT(idx)))
+			continue;
+
 		if (rate->idx != mp->cck_rates[idx])
 			continue;
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 015/109] drm/komeda: return early if drm_universal_plane_init() fails.

[Sasha Levin]

From: Liviu Dudau <liviu.dudau@arm.com>

[ Upstream commit c8f76c37cc3668ee45e081e76a15f24a352ebbdd ]

If drm_universal_plane_init() fails early we jump to the common cleanup code
that calls komeda_plane_destroy() which in turn could access the uninitalised
drm_plane and crash. Return early if an error is detected without going through
the common code.

Reported-by: Steven Price <steven.price@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211203100946.2706922-1-liviu.dudau@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/arm/display/komeda/komeda_plane.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c b/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
index d63d83800a8a..d646e3ae1a23 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
@@ -275,8 +275,10 @@ static int komeda_plane_add(struct komeda_kms_dev *kms,
 
 	komeda_put_fourcc_list(formats);
 
-	if (err)
-		goto cleanup;
+	if (err) {
+		kfree(kplane);
+		return err;
+	}
 
 	drm_plane_helper_add(plane, &komeda_plane_helper_funcs);
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 015/109] drm/komeda: return early if drm_universal_plane_init() fails.

[Sasha Levin]

From: Liviu Dudau <liviu.dudau@arm.com>

[ Upstream commit c8f76c37cc3668ee45e081e76a15f24a352ebbdd ]

If drm_universal_plane_init() fails early we jump to the common cleanup code
that calls komeda_plane_destroy() which in turn could access the uninitalised
drm_plane and crash. Return early if an error is detected without going through
the common code.

Reported-by: Steven Price <steven.price@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211203100946.2706922-1-liviu.dudau@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/arm/display/komeda/komeda_plane.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c b/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
index d63d83800a8a..d646e3ae1a23 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
@@ -275,8 +275,10 @@ static int komeda_plane_add(struct komeda_kms_dev *kms,
 
 	komeda_put_fourcc_list(formats);
 
-	if (err)
-		goto cleanup;
+	if (err) {
+		kfree(kplane);
+		return err;
+	}
 
 	drm_plane_helper_add(plane, &komeda_plane_helper_funcs);
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 016/109] drm/amd/display: Disabling Z10 on DCN31

[Sasha Levin]

From: Saaem Rizvi <syerizvi@amd.com>

[ Upstream commit 5d5af34072c8b11f60960c3bea57ff9de5877791 ]

[WHY]
Z10 is should not be enabled by default on DCN31.

[HOW]
Using DC debug flags to disable Z10 by default on DCN31.

Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Saaem Rizvi <syerizvi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
index a5ef9d5e7685..310ced5058c4 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
@@ -957,6 +957,7 @@ static const struct dc_debug_options debug_defaults_drv = {
 			.optc = false,
 		}
 	},
+	.disable_z10 = true,
 	.optimize_edp_link_rate = true,
 	.enable_sw_cntl_psr = true,
 };
-- 
2.35.1

[PATCH AUTOSEL 5.15 017/109] rcu-tasks: Fix race in schedule and flush work

[Sasha Levin]

From: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>

[ Upstream commit f75fd4b9221d93177c50dcfde671b2e907f53e86 ]

While booting secondary CPUs, cpus_read_[lock/unlock] is not keeping
online cpumask stable. The transient online mask results in below
calltrace.

[    0.324121] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.346652] Detected PIPT I-cache on CPU2
[    0.347212] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.377255] Detected PIPT I-cache on CPU3
[    0.377823] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.379040] ------------[ cut here ]------------
[    0.383662] WARNING: CPU: 0 PID: 10 at kernel/workqueue.c:3084 __flush_work+0x12c/0x138
[    0.384850] Modules linked in:
[    0.385403] CPU: 0 PID: 10 Comm: rcu_tasks_rude_ Not tainted 5.17.0-rc3-v8+ #13
[    0.386473] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[    0.387289] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.388308] pc : __flush_work+0x12c/0x138
[    0.388970] lr : __flush_work+0x80/0x138
[    0.389620] sp : ffffffc00aaf3c60
[    0.390139] x29: ffffffc00aaf3d20 x28: ffffffc009c16af0 x27: ffffff80f761df48
[    0.391316] x26: 0000000000000004 x25: 0000000000000003 x24: 0000000000000100
[    0.392493] x23: ffffffffffffffff x22: ffffffc009c16b10 x21: ffffffc009c16b28
[    0.393668] x20: ffffffc009e53861 x19: ffffff80f77fbf40 x18: 00000000d744fcc9
[    0.394842] x17: 000000000000000b x16: 00000000000001c2 x15: ffffffc009e57550
[    0.396016] x14: 0000000000000000 x13: ffffffffffffffff x12: 0000000100000000
[    0.397190] x11: 0000000000000462 x10: ffffff8040258008 x9 : 0000000100000000
[    0.398364] x8 : 0000000000000000 x7 : ffffffc0093c8bf4 x6 : 0000000000000000
[    0.399538] x5 : 0000000000000000 x4 : ffffffc00a976e40 x3 : ffffffc00810444c
[    0.400711] x2 : 0000000000000004 x1 : 0000000000000000 x0 : 0000000000000000
[    0.401886] Call trace:
[    0.402309]  __flush_work+0x12c/0x138
[    0.402941]  schedule_on_each_cpu+0x228/0x278
[    0.403693]  rcu_tasks_rude_wait_gp+0x130/0x144
[    0.404502]  rcu_tasks_kthread+0x220/0x254
[    0.405264]  kthread+0x174/0x1ac
[    0.405837]  ret_from_fork+0x10/0x20
[    0.406456] irq event stamp: 102
[    0.406966] hardirqs last  enabled at (101): [<ffffffc0093c8468>] _raw_spin_unlock_irq+0x78/0xb4
[    0.408304] hardirqs last disabled at (102): [<ffffffc0093b8270>] el1_dbg+0x24/0x5c
[    0.409410] softirqs last  enabled at (54): [<ffffffc0081b80c8>] local_bh_enable+0xc/0x2c
[    0.410645] softirqs last disabled at (50): [<ffffffc0081b809c>] local_bh_disable+0xc/0x2c
[    0.411890] ---[ end trace 0000000000000000 ]---
[    0.413000] smp: Brought up 1 node, 4 CPUs
[    0.413762] SMP: Total of 4 processors activated.
[    0.414566] CPU features: detected: 32-bit EL0 Support
[    0.415414] CPU features: detected: 32-bit EL1 Support
[    0.416278] CPU features: detected: CRC32 instructions
[    0.447021] Callback from call_rcu_tasks_rude() invoked.
[    0.506693] Callback from call_rcu_tasks() invoked.

This commit therefore fixes this issue by applying a single-CPU
optimization to the RCU Tasks Rude grace-period process.  The key point
here is that the purpose of this RCU flavor is to force a schedule on
each online CPU since some past event.  But the rcu_tasks_rude_wait_gp()
function runs in the context of the RCU Tasks Rude's grace-period kthread,
so there must already have been a context switch on the current CPU since
the call to either synchronize_rcu_tasks_rude() or call_rcu_tasks_rude().
So if there is only a single CPU online, RCU Tasks Rude's grace-period
kthread does not need to anything at all.

It turns out that the rcu_tasks_rude_wait_gp() function's call to
schedule_on_each_cpu() causes problems during early boot.  During that
time, there is only one online CPU, namely the boot CPU.  Therefore,
applying this single-CPU optimization fixes early-boot instances of
this problem.

Link: https://lore.kernel.org/lkml/20220210184319.25009-1-treasure4paddy@gmail.com/T/
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/rcu/tasks.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
index 6591914af486..60c9eacac25b 100644
--- a/kernel/rcu/tasks.h
+++ b/kernel/rcu/tasks.h
@@ -660,6 +660,9 @@ static void rcu_tasks_be_rude(struct work_struct *work)
 // Wait for one rude RCU-tasks grace period.
 static void rcu_tasks_rude_wait_gp(struct rcu_tasks *rtp)
 {
+	if (num_online_cpus() <= 1)
+		return;	// Fastpath for only one CPU.
+
 	rtp->n_ipis += cpumask_weight(cpu_online_mask);
 	schedule_on_each_cpu(rcu_tasks_be_rude);
 }
-- 
2.35.1

[PATCH AUTOSEL 5.15 018/109] rcu: Make TASKS_RUDE_RCU select IRQ_WORK

[Sasha Levin]

From: "Paul E. McKenney" <paulmck@kernel.org>

[ Upstream commit 46e861be589881e0905b9ade3d8439883858721c ]

The TASKS_RUDE_RCU does not select IRQ_WORK, which can result in build
failures for kernels that do not otherwise select IRQ_WORK.  This commit
therefore causes the TASKS_RUDE_RCU Kconfig option to select IRQ_WORK.

Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/rcu/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/rcu/Kconfig b/kernel/rcu/Kconfig
index 3128b7cf8e1f..f73cf17fcee9 100644
--- a/kernel/rcu/Kconfig
+++ b/kernel/rcu/Kconfig
@@ -86,6 +86,7 @@ config TASKS_RCU
 
 config TASKS_RUDE_RCU
 	def_bool 0
+	select IRQ_WORK
 	help
 	  This option enables a task-based RCU implementation that uses
 	  only context switch (including preemption) and user-mode
-- 
2.35.1

[PATCH AUTOSEL 5.15 019/109] sfc: ef10: Fix assigning negative value to unsigned variable

[Sasha Levin]

From: Haowen Bai <baihaowen@meizu.com>

[ Upstream commit b8ff3395fbdf3b79a99d0ef410fc34c51044121e ]

fix warning reported by smatch:
251 drivers/net/ethernet/sfc/ef10.c:2259 efx_ef10_tx_tso_desc()
warn: assigning (-208) to unsigned variable 'ip_tot_len'

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/1649640757-30041-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index f5a4d8f4fd11..c1cd1c97f09d 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -2256,7 +2256,7 @@ int efx_ef10_tx_tso_desc(struct efx_tx_queue *tx_queue, struct sk_buff *skb,
 	 * guaranteed to satisfy the second as we only attempt TSO if
 	 * inner_network_header <= 208.
 	 */
-	ip_tot_len = -EFX_TSO2_MAX_HDRLEN;
+	ip_tot_len = 0x10000 - EFX_TSO2_MAX_HDRLEN;
 	EFX_WARN_ON_ONCE_PARANOID(mss + EFX_TSO2_MAX_HDRLEN +
 				  (tcp->doff << 2u) > ip_tot_len);
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 020/109] ALSA: jack: Access input_dev under mutex

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 1b6a6fc5280e97559287b61eade2d4b363e836f2 ]

It is possible when using ASoC that input_dev is unregistered while
calling snd_jack_report, which causes NULL pointer dereference.
In order to prevent this serialize access to input_dev using mutex lock.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220412091628.3056922-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/jack.h |  1 +
 sound/core/jack.c    | 34 +++++++++++++++++++++++++++-------
 2 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/include/sound/jack.h b/include/sound/jack.h
index 1181f536557e..1ed90e2109e9 100644
--- a/include/sound/jack.h
+++ b/include/sound/jack.h
@@ -62,6 +62,7 @@ struct snd_jack {
 	const char *id;
 #ifdef CONFIG_SND_JACK_INPUT_DEV
 	struct input_dev *input_dev;
+	struct mutex input_dev_lock;
 	int registered;
 	int type;
 	char name[100];
diff --git a/sound/core/jack.c b/sound/core/jack.c
index d1e3055f2b6a..88493cc31914 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -42,8 +42,11 @@ static int snd_jack_dev_disconnect(struct snd_device *device)
 #ifdef CONFIG_SND_JACK_INPUT_DEV
 	struct snd_jack *jack = device->device_data;
 
-	if (!jack->input_dev)
+	mutex_lock(&jack->input_dev_lock);
+	if (!jack->input_dev) {
+		mutex_unlock(&jack->input_dev_lock);
 		return 0;
+	}
 
 	/* If the input device is registered with the input subsystem
 	 * then we need to use a different deallocator. */
@@ -52,6 +55,7 @@ static int snd_jack_dev_disconnect(struct snd_device *device)
 	else
 		input_free_device(jack->input_dev);
 	jack->input_dev = NULL;
+	mutex_unlock(&jack->input_dev_lock);
 #endif /* CONFIG_SND_JACK_INPUT_DEV */
 	return 0;
 }
@@ -90,8 +94,11 @@ static int snd_jack_dev_register(struct snd_device *device)
 	snprintf(jack->name, sizeof(jack->name), "%s %s",
 		 card->shortname, jack->id);
 
-	if (!jack->input_dev)
+	mutex_lock(&jack->input_dev_lock);
+	if (!jack->input_dev) {
+		mutex_unlock(&jack->input_dev_lock);
 		return 0;
+	}
 
 	jack->input_dev->name = jack->name;
 
@@ -116,6 +123,7 @@ static int snd_jack_dev_register(struct snd_device *device)
 	if (err == 0)
 		jack->registered = 1;
 
+	mutex_unlock(&jack->input_dev_lock);
 	return err;
 }
 #endif /* CONFIG_SND_JACK_INPUT_DEV */
@@ -517,9 +525,11 @@ int snd_jack_new(struct snd_card *card, const char *id, int type,
 		return -ENOMEM;
 	}
 
-	/* don't creat input device for phantom jack */
-	if (!phantom_jack) {
 #ifdef CONFIG_SND_JACK_INPUT_DEV
+	mutex_init(&jack->input_dev_lock);
+
+	/* don't create input device for phantom jack */
+	if (!phantom_jack) {
 		int i;
 
 		jack->input_dev = input_allocate_device();
@@ -537,8 +547,8 @@ int snd_jack_new(struct snd_card *card, const char *id, int type,
 				input_set_capability(jack->input_dev, EV_SW,
 						     jack_switch_types[i]);
 
-#endif /* CONFIG_SND_JACK_INPUT_DEV */
 	}
+#endif /* CONFIG_SND_JACK_INPUT_DEV */
 
 	err = snd_device_new(card, SNDRV_DEV_JACK, jack, &ops);
 	if (err < 0)
@@ -578,10 +588,14 @@ EXPORT_SYMBOL(snd_jack_new);
 void snd_jack_set_parent(struct snd_jack *jack, struct device *parent)
 {
 	WARN_ON(jack->registered);
-	if (!jack->input_dev)
+	mutex_lock(&jack->input_dev_lock);
+	if (!jack->input_dev) {
+		mutex_unlock(&jack->input_dev_lock);
 		return;
+	}
 
 	jack->input_dev->dev.parent = parent;
+	mutex_unlock(&jack->input_dev_lock);
 }
 EXPORT_SYMBOL(snd_jack_set_parent);
 
@@ -629,6 +643,8 @@ EXPORT_SYMBOL(snd_jack_set_key);
 
 /**
  * snd_jack_report - Report the current status of a jack
+ * Note: This function uses mutexes and should be called from a
+ * context which can sleep (such as a workqueue).
  *
  * @jack:   The jack to report status for
  * @status: The current status of the jack
@@ -654,8 +670,11 @@ void snd_jack_report(struct snd_jack *jack, int status)
 					     status & jack_kctl->mask_bits);
 
 #ifdef CONFIG_SND_JACK_INPUT_DEV
-	if (!jack->input_dev)
+	mutex_lock(&jack->input_dev_lock);
+	if (!jack->input_dev) {
+		mutex_unlock(&jack->input_dev_lock);
 		return;
+	}
 
 	for (i = 0; i < ARRAY_SIZE(jack->key); i++) {
 		int testbit = ((SND_JACK_BTN_0 >> i) & ~mask_bits);
@@ -675,6 +694,7 @@ void snd_jack_report(struct snd_jack *jack, int status)
 	}
 
 	input_sync(jack->input_dev);
+	mutex_unlock(&jack->input_dev_lock);
 #endif /* CONFIG_SND_JACK_INPUT_DEV */
 }
 EXPORT_SYMBOL(snd_jack_report);
-- 
2.35.1

[PATCH AUTOSEL 5.15 020/109] ALSA: jack: Access input_dev under mutex

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 1b6a6fc5280e97559287b61eade2d4b363e836f2 ]

It is possible when using ASoC that input_dev is unregistered while
calling snd_jack_report, which causes NULL pointer dereference.
In order to prevent this serialize access to input_dev using mutex lock.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220412091628.3056922-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/jack.h |  1 +
 sound/core/jack.c    | 34 +++++++++++++++++++++++++++-------
 2 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/include/sound/jack.h b/include/sound/jack.h
index 1181f536557e..1ed90e2109e9 100644
--- a/include/sound/jack.h
+++ b/include/sound/jack.h
@@ -62,6 +62,7 @@ struct snd_jack {
 	const char *id;
 #ifdef CONFIG_SND_JACK_INPUT_DEV
 	struct input_dev *input_dev;
+	struct mutex input_dev_lock;
 	int registered;
 	int type;
 	char name[100];
diff --git a/sound/core/jack.c b/sound/core/jack.c
index d1e3055f2b6a..88493cc31914 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -42,8 +42,11 @@ static int snd_jack_dev_disconnect(struct snd_device *device)
 #ifdef CONFIG_SND_JACK_INPUT_DEV
 	struct snd_jack *jack = device->device_data;
 
-	if (!jack->input_dev)
+	mutex_lock(&jack->input_dev_lock);
+	if (!jack->input_dev) {
+		mutex_unlock(&jack->input_dev_lock);
 		return 0;
+	}
 
 	/* If the input device is registered with the input subsystem
 	 * then we need to use a different deallocator. */
@@ -52,6 +55,7 @@ static int snd_jack_dev_disconnect(struct snd_device *device)
 	else
 		input_free_device(jack->input_dev);
 	jack->input_dev = NULL;
+	mutex_unlock(&jack->input_dev_lock);
 #endif /* CONFIG_SND_JACK_INPUT_DEV */
 	return 0;
 }
@@ -90,8 +94,11 @@ static int snd_jack_dev_register(struct snd_device *device)
 	snprintf(jack->name, sizeof(jack->name), "%s %s",
 		 card->shortname, jack->id);
 
-	if (!jack->input_dev)
+	mutex_lock(&jack->input_dev_lock);
+	if (!jack->input_dev) {
+		mutex_unlock(&jack->input_dev_lock);
 		return 0;
+	}
 
 	jack->input_dev->name = jack->name;
 
@@ -116,6 +123,7 @@ static int snd_jack_dev_register(struct snd_device *device)
 	if (err == 0)
 		jack->registered = 1;
 
+	mutex_unlock(&jack->input_dev_lock);
 	return err;
 }
 #endif /* CONFIG_SND_JACK_INPUT_DEV */
@@ -517,9 +525,11 @@ int snd_jack_new(struct snd_card *card, const char *id, int type,
 		return -ENOMEM;
 	}
 
-	/* don't creat input device for phantom jack */
-	if (!phantom_jack) {
 #ifdef CONFIG_SND_JACK_INPUT_DEV
+	mutex_init(&jack->input_dev_lock);
+
+	/* don't create input device for phantom jack */
+	if (!phantom_jack) {
 		int i;
 
 		jack->input_dev = input_allocate_device();
@@ -537,8 +547,8 @@ int snd_jack_new(struct snd_card *card, const char *id, int type,
 				input_set_capability(jack->input_dev, EV_SW,
 						     jack_switch_types[i]);
 
-#endif /* CONFIG_SND_JACK_INPUT_DEV */
 	}
+#endif /* CONFIG_SND_JACK_INPUT_DEV */
 
 	err = snd_device_new(card, SNDRV_DEV_JACK, jack, &ops);
 	if (err < 0)
@@ -578,10 +588,14 @@ EXPORT_SYMBOL(snd_jack_new);
 void snd_jack_set_parent(struct snd_jack *jack, struct device *parent)
 {
 	WARN_ON(jack->registered);
-	if (!jack->input_dev)
+	mutex_lock(&jack->input_dev_lock);
+	if (!jack->input_dev) {
+		mutex_unlock(&jack->input_dev_lock);
 		return;
+	}
 
 	jack->input_dev->dev.parent = parent;
+	mutex_unlock(&jack->input_dev_lock);
 }
 EXPORT_SYMBOL(snd_jack_set_parent);
 
@@ -629,6 +643,8 @@ EXPORT_SYMBOL(snd_jack_set_key);
 
 /**
  * snd_jack_report - Report the current status of a jack
+ * Note: This function uses mutexes and should be called from a
+ * context which can sleep (such as a workqueue).
  *
  * @jack:   The jack to report status for
  * @status: The current status of the jack
@@ -654,8 +670,11 @@ void snd_jack_report(struct snd_jack *jack, int status)
 					     status & jack_kctl->mask_bits);
 
 #ifdef CONFIG_SND_JACK_INPUT_DEV
-	if (!jack->input_dev)
+	mutex_lock(&jack->input_dev_lock);
+	if (!jack->input_dev) {
+		mutex_unlock(&jack->input_dev_lock);
 		return;
+	}
 
 	for (i = 0; i < ARRAY_SIZE(jack->key); i++) {
 		int testbit = ((SND_JACK_BTN_0 >> i) & ~mask_bits);
@@ -675,6 +694,7 @@ void snd_jack_report(struct snd_jack *jack, int status)
 	}
 
 	input_sync(jack->input_dev);
+	mutex_unlock(&jack->input_dev_lock);
 #endif /* CONFIG_SND_JACK_INPUT_DEV */
 }
 EXPORT_SYMBOL(snd_jack_report);
-- 
2.35.1

[PATCH AUTOSEL 5.15 021/109] rtw88: 8821c: fix debugfs rssi value

[Sasha Levin]

From: Po-Hao Huang <phhuang@realtek.com>

[ Upstream commit ece31c93d4d68f7eb8eea4431b052aacdb678de2 ]

RSSI value per frame is reported to mac80211 but not maintained in
our own statistics, add it back to help us debug.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220407095858.46807-7-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/rtw8821c.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.c b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
index 785b8181513f..f405f42d1c1b 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
@@ -506,6 +506,7 @@ static s8 get_cck_rx_pwr(struct rtw_dev *rtwdev, u8 lna_idx, u8 vga_idx)
 static void query_phy_status_page0(struct rtw_dev *rtwdev, u8 *phy_status,
 				   struct rtw_rx_pkt_stat *pkt_stat)
 {
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
 	s8 rx_power;
 	u8 lna_idx = 0;
 	u8 vga_idx = 0;
@@ -517,6 +518,7 @@ static void query_phy_status_page0(struct rtw_dev *rtwdev, u8 *phy_status,
 
 	pkt_stat->rx_power[RF_PATH_A] = rx_power;
 	pkt_stat->rssi = rtw_phy_rf_power_2_rssi(pkt_stat->rx_power, 1);
+	dm_info->rssi[RF_PATH_A] = pkt_stat->rssi;
 	pkt_stat->bw = RTW_CHANNEL_WIDTH_20;
 	pkt_stat->signal_power = rx_power;
 }
@@ -524,6 +526,7 @@ static void query_phy_status_page0(struct rtw_dev *rtwdev, u8 *phy_status,
 static void query_phy_status_page1(struct rtw_dev *rtwdev, u8 *phy_status,
 				   struct rtw_rx_pkt_stat *pkt_stat)
 {
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
 	u8 rxsc, bw;
 	s8 min_rx_power = -120;
 
@@ -543,6 +546,7 @@ static void query_phy_status_page1(struct rtw_dev *rtwdev, u8 *phy_status,
 
 	pkt_stat->rx_power[RF_PATH_A] = GET_PHY_STAT_P1_PWDB_A(phy_status) - 110;
 	pkt_stat->rssi = rtw_phy_rf_power_2_rssi(pkt_stat->rx_power, 1);
+	dm_info->rssi[RF_PATH_A] = pkt_stat->rssi;
 	pkt_stat->bw = bw;
 	pkt_stat->signal_power = max(pkt_stat->rx_power[RF_PATH_A],
 				     min_rx_power);
-- 
2.35.1

[PATCH AUTOSEL 5.15 022/109] spi: spi-rspi: Remove setting {src,dst}_{addr,addr_width} based on DMA direction

[Sasha Levin]

From: Biju Das <biju.das.jz@bp.renesas.com>

[ Upstream commit 6f381481a5b236cb53d6de2c49c6ef83a4d0f432 ]

The direction field in the DMA config is deprecated. The rspi driver
sets {src,dst}_{addr,addr_width} based on the DMA direction and
it results in dmaengine_slave_config() failure as RZ DMAC driver
validates {src,dst}_addr_width values independent of DMA direction.

This patch fixes the issue by passing both {src,dst}_{addr,addr_width}
values independent of DMA direction.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Suggested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220411173115.6619-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-rspi.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index d16ed88802d3..d575c935e9f0 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -1107,14 +1107,11 @@ static struct dma_chan *rspi_request_dma_chan(struct device *dev,
 	}
 
 	memset(&cfg, 0, sizeof(cfg));
+	cfg.dst_addr = port_addr + RSPI_SPDR;
+	cfg.src_addr = port_addr + RSPI_SPDR;
+	cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
 	cfg.direction = dir;
-	if (dir == DMA_MEM_TO_DEV) {
-		cfg.dst_addr = port_addr;
-		cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-	} else {
-		cfg.src_addr = port_addr;
-		cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-	}
 
 	ret = dmaengine_slave_config(chan, &cfg);
 	if (ret) {
@@ -1145,12 +1142,12 @@ static int rspi_request_dma(struct device *dev, struct spi_controller *ctlr,
 	}
 
 	ctlr->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, dma_tx_id,
-					     res->start + RSPI_SPDR);
+					     res->start);
 	if (!ctlr->dma_tx)
 		return -ENODEV;
 
 	ctlr->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, dma_rx_id,
-					     res->start + RSPI_SPDR);
+					     res->start);
 	if (!ctlr->dma_rx) {
 		dma_release_channel(ctlr->dma_tx);
 		ctlr->dma_tx = NULL;
-- 
2.35.1

[PATCH AUTOSEL 5.15 023/109] tools/power turbostat: fix ICX DRAM power numbers

[Sasha Levin]

From: Len Brown <len.brown@intel.com>

[ Upstream commit 6397b6418935773a34b533b3348b03f4ce3d7050 ]

ICX (and its duplicates) require special hard-coded DRAM RAPL units,
rather than using the generic RAPL energy units.

Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/turbostat/turbostat.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 47d3ba895d6d..4f176bbf29f4 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -4376,6 +4376,7 @@ static double rapl_dram_energy_units_probe(int model, double rapl_energy_units)
 	case INTEL_FAM6_BROADWELL_X:	/* BDX */
 	case INTEL_FAM6_SKYLAKE_X:	/* SKX */
 	case INTEL_FAM6_XEON_PHI_KNL:	/* KNL */
+	case INTEL_FAM6_ICELAKE_X:	/* ICX */
 		return (rapl_dram_energy_units = 15.3 / 1000000);
 	default:
 		return (rapl_energy_units);
-- 
2.35.1

[PATCH AUTOSEL 5.15 024/109] scsi: lpfc: Move cfg_log_verbose check before calling lpfc_dmp_dbg()

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit e294647b1aed4247fe52851f3a3b2b19ae906228 ]

In an attempt to log message 0126 with LOG_TRACE_EVENT, the following hard
lockup call trace hangs the system.

Call Trace:
 _raw_spin_lock_irqsave+0x32/0x40
 lpfc_dmp_dbg.part.32+0x28/0x220 [lpfc]
 lpfc_cmpl_els_fdisc+0x145/0x460 [lpfc]
 lpfc_sli_cancel_jobs+0x92/0xd0 [lpfc]
 lpfc_els_flush_cmd+0x43c/0x670 [lpfc]
 lpfc_els_flush_all_cmd+0x37/0x60 [lpfc]
 lpfc_sli4_async_event_proc+0x956/0x1720 [lpfc]
 lpfc_do_work+0x1485/0x1d70 [lpfc]
 kthread+0x112/0x130
 ret_from_fork+0x1f/0x40
Kernel panic - not syncing: Hard LOCKUP

The same CPU tries to claim the phba->port_list_lock twice.

Move the cfg_log_verbose checks as part of the lpfc_printf_vlog() and
lpfc_printf_log() macros before calling lpfc_dmp_dbg().  There is no need
to take the phba->port_list_lock within lpfc_dmp_dbg().

Link: https://lore.kernel.org/r/20220412222008.126521-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_init.c   | 29 +----------------------------
 drivers/scsi/lpfc/lpfc_logmsg.h |  6 +++---
 2 files changed, 4 insertions(+), 31 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 16246526e4c1..ce103c1f8062 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -15564,34 +15564,7 @@ void lpfc_dmp_dbg(struct lpfc_hba *phba)
 	unsigned int temp_idx;
 	int i;
 	int j = 0;
-	unsigned long rem_nsec, iflags;
-	bool log_verbose = false;
-	struct lpfc_vport *port_iterator;
-
-	/* Don't dump messages if we explicitly set log_verbose for the
-	 * physical port or any vport.
-	 */
-	if (phba->cfg_log_verbose)
-		return;
-
-	spin_lock_irqsave(&phba->port_list_lock, iflags);
-	list_for_each_entry(port_iterator, &phba->port_list, listentry) {
-		if (port_iterator->load_flag & FC_UNLOADING)
-			continue;
-		if (scsi_host_get(lpfc_shost_from_vport(port_iterator))) {
-			if (port_iterator->cfg_log_verbose)
-				log_verbose = true;
-
-			scsi_host_put(lpfc_shost_from_vport(port_iterator));
-
-			if (log_verbose) {
-				spin_unlock_irqrestore(&phba->port_list_lock,
-						       iflags);
-				return;
-			}
-		}
-	}
-	spin_unlock_irqrestore(&phba->port_list_lock, iflags);
+	unsigned long rem_nsec;
 
 	if (atomic_cmpxchg(&phba->dbg_log_dmping, 0, 1) != 0)
 		return;
diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
index 7d480c798794..a5aafe230c74 100644
--- a/drivers/scsi/lpfc/lpfc_logmsg.h
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -73,7 +73,7 @@ do { \
 #define lpfc_printf_vlog(vport, level, mask, fmt, arg...) \
 do { \
 	{ if (((mask) & (vport)->cfg_log_verbose) || (level[1] <= '3')) { \
-		if ((mask) & LOG_TRACE_EVENT) \
+		if ((mask) & LOG_TRACE_EVENT && !(vport)->cfg_log_verbose) \
 			lpfc_dmp_dbg((vport)->phba); \
 		dev_printk(level, &((vport)->phba->pcidev)->dev, "%d:(%d):" \
 			   fmt, (vport)->phba->brd_no, vport->vpi, ##arg);  \
@@ -89,11 +89,11 @@ do { \
 				 (phba)->pport->cfg_log_verbose : \
 				 (phba)->cfg_log_verbose; \
 	if (((mask) & log_verbose) || (level[1] <= '3')) { \
-		if ((mask) & LOG_TRACE_EVENT) \
+		if ((mask) & LOG_TRACE_EVENT && !log_verbose) \
 			lpfc_dmp_dbg(phba); \
 		dev_printk(level, &((phba)->pcidev)->dev, "%d:" \
 			fmt, phba->brd_no, ##arg); \
-	} else  if (!(phba)->cfg_log_verbose)\
+	} else if (!log_verbose)\
 		lpfc_dbg_print(phba, "%d:" fmt, phba->brd_no, ##arg); \
 	} \
 } while (0)
-- 
2.35.1

[PATCH AUTOSEL 5.15 025/109] scsi: lpfc: Fix SCSI I/O completion and abort handler deadlock

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 03cbbd7c2f5ee288f648f4aeedc765a181188553 ]

During stress I/O tests with 500+ vports, hard LOCKUP call traces are
observed.

CPU A:
 native_queued_spin_lock_slowpath+0x192
 _raw_spin_lock_irqsave+0x32
 lpfc_handle_fcp_err+0x4c6
 lpfc_fcp_io_cmd_wqe_cmpl+0x964
 lpfc_sli4_fp_handle_cqe+0x266
 __lpfc_sli4_process_cq+0x105
 __lpfc_sli4_hba_process_cq+0x3c
 lpfc_cq_poll_hdler+0x16
 irq_poll_softirq+0x76
 __softirqentry_text_start+0xe4
 irq_exit+0xf7
 do_IRQ+0x7f

CPU B:
 native_queued_spin_lock_slowpath+0x5b
 _raw_spin_lock+0x1c
 lpfc_abort_handler+0x13e
 scmd_eh_abort_handler+0x85
 process_one_work+0x1a7
 worker_thread+0x30
 kthread+0x112
 ret_from_fork+0x1f

Diagram of lockup:

CPUA                            CPUB
----                            ----
lpfc_cmd->buf_lock
                            phba->hbalock
                            lpfc_cmd->buf_lock
phba->hbalock

Fix by reordering the taking of the lpfc_cmd->buf_lock and phba->hbalock in
lpfc_abort_handler routine so that it tries to take the lpfc_cmd->buf_lock
first before phba->hbalock.

Link: https://lore.kernel.org/r/20220412222008.126521-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_scsi.c | 33 +++++++++++++++------------------
 1 file changed, 15 insertions(+), 18 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 3d9175f1b678..8c79264a935b 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -5885,25 +5885,25 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	if (!lpfc_cmd)
 		return ret;
 
-	spin_lock_irqsave(&phba->hbalock, flags);
+	/* Guard against IO completion being called at same time */
+	spin_lock_irqsave(&lpfc_cmd->buf_lock, flags);
+
+	spin_lock(&phba->hbalock);
 	/* driver queued commands are in process of being flushed */
 	if (phba->hba_flag & HBA_IOQ_FLUSH) {
 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
 			"3168 SCSI Layer abort requested I/O has been "
 			"flushed by LLD.\n");
 		ret = FAILED;
-		goto out_unlock;
+		goto out_unlock_hba;
 	}
 
-	/* Guard against IO completion being called at same time */
-	spin_lock(&lpfc_cmd->buf_lock);
-
 	if (!lpfc_cmd->pCmd) {
 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
 			 "2873 SCSI Layer I/O Abort Request IO CMPL Status "
 			 "x%x ID %d LUN %llu\n",
 			 SUCCESS, cmnd->device->id, cmnd->device->lun);
-		goto out_unlock_buf;
+		goto out_unlock_hba;
 	}
 
 	iocb = &lpfc_cmd->cur_iocbq;
@@ -5911,7 +5911,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 		pring_s4 = phba->sli4_hba.hdwq[iocb->hba_wqidx].io_wq->pring;
 		if (!pring_s4) {
 			ret = FAILED;
-			goto out_unlock_buf;
+			goto out_unlock_hba;
 		}
 		spin_lock(&pring_s4->ring_lock);
 	}
@@ -5944,8 +5944,8 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 			 "3389 SCSI Layer I/O Abort Request is pending\n");
 		if (phba->sli_rev == LPFC_SLI_REV4)
 			spin_unlock(&pring_s4->ring_lock);
-		spin_unlock(&lpfc_cmd->buf_lock);
-		spin_unlock_irqrestore(&phba->hbalock, flags);
+		spin_unlock(&phba->hbalock);
+		spin_unlock_irqrestore(&lpfc_cmd->buf_lock, flags);
 		goto wait_for_cmpl;
 	}
 
@@ -5966,15 +5966,13 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	if (ret_val != IOCB_SUCCESS) {
 		/* Indicate the IO is not being aborted by the driver. */
 		lpfc_cmd->waitq = NULL;
-		spin_unlock(&lpfc_cmd->buf_lock);
-		spin_unlock_irqrestore(&phba->hbalock, flags);
 		ret = FAILED;
-		goto out;
+		goto out_unlock_hba;
 	}
 
 	/* no longer need the lock after this point */
-	spin_unlock(&lpfc_cmd->buf_lock);
-	spin_unlock_irqrestore(&phba->hbalock, flags);
+	spin_unlock(&phba->hbalock);
+	spin_unlock_irqrestore(&lpfc_cmd->buf_lock, flags);
 
 	if (phba->cfg_poll & DISABLE_FCP_RING_INT)
 		lpfc_sli_handle_fast_ring_event(phba,
@@ -6009,10 +6007,9 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 out_unlock_ring:
 	if (phba->sli_rev == LPFC_SLI_REV4)
 		spin_unlock(&pring_s4->ring_lock);
-out_unlock_buf:
-	spin_unlock(&lpfc_cmd->buf_lock);
-out_unlock:
-	spin_unlock_irqrestore(&phba->hbalock, flags);
+out_unlock_hba:
+	spin_unlock(&phba->hbalock);
+	spin_unlock_irqrestore(&lpfc_cmd->buf_lock, flags);
 out:
 	lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
 			 "0749 SCSI Layer I/O Abort Request Status x%x ID %d "
-- 
2.35.1

[PATCH AUTOSEL 5.15 026/109] scsi: lpfc: Fix call trace observed during I/O with CMF enabled

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit d6d45f67a11136cb88a70a29ab22ea6db8ae6bd5 ]

The following was seen with CMF enabled:

BUG: using smp_processor_id() in preemptible
code: systemd-udevd/31711
kernel: caller is lpfc_update_cmf_cmd+0x214/0x420  [lpfc]
kernel: CPU: 12 PID: 31711 Comm: systemd-udevd
kernel: Call Trace:
kernel: <TASK>
kernel: dump_stack_lvl+0x44/0x57
kernel: check_preemption_disabled+0xbf/0xe0
kernel: lpfc_update_cmf_cmd+0x214/0x420 [lpfc]
kernel: lpfc_nvme_fcp_io_submit+0x23b4/0x4df0 [lpfc]

this_cpu_ptr() calls smp_processor_id() in a preemptible context.

Fix by using per_cpu_ptr() with raw_smp_processor_id() instead.

Link: https://lore.kernel.org/r/20220412222008.126521-16-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_scsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 8c79264a935b..c6944b282e21 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -3917,7 +3917,7 @@ lpfc_update_cmf_cmpl(struct lpfc_hba *phba,
 		else
 			time = div_u64(time + 500, 1000); /* round it */
 
-		cgs = this_cpu_ptr(phba->cmf_stat);
+		cgs = per_cpu_ptr(phba->cmf_stat, raw_smp_processor_id());
 		atomic64_add(size, &cgs->rcv_bytes);
 		atomic64_add(time, &cgs->rx_latency);
 		atomic_inc(&cgs->rx_io_cnt);
@@ -3960,7 +3960,7 @@ lpfc_update_cmf_cmd(struct lpfc_hba *phba, uint32_t size)
 			atomic_set(&phba->rx_max_read_cnt, size);
 	}
 
-	cgs = this_cpu_ptr(phba->cmf_stat);
+	cgs = per_cpu_ptr(phba->cmf_stat, raw_smp_processor_id());
 	atomic64_add(size, &cgs->total_bytes);
 	return 0;
 }
-- 
2.35.1

[PATCH AUTOSEL 5.15 027/109] cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode

[Sasha Levin]

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit 171b66e2e2e9d80b93c8cff799e6175074b22297 ]

When PSCI OSI mode is supported the syscore flag is set for the CPU devices
that becomes attached to their PM domains (genpds). In the suspend-to-idle
case, we call dev_pm_genpd_suspend|resume() to allow genpd to properly
manage the power-off/on operations (pick an idlestate and manage the on/off
notifications).

For suspend-to-ram, dev_pm_genpd_suspend|resume() is currently not being
called, which causes a problem that the genpd on/off notifiers do not get
sent as expected. This prevents the platform-specific operations from being
executed, typically needed just before/after the boot CPU is being turned
off/on.

To deal with this problem, let's register a syscore ops for cpuidle-psci
when PSCI OSI mode is being used and call dev_pm_genpd_suspend|resume()
from them. In this way, genpd regains control of the PM domain topology and
then sends the on/off notifications when it's appropriate.

Reported-by: Maulik Shah <quic_mkshah@quicinc.com>
Suggested-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpuidle/cpuidle-psci.c | 46 ++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/cpuidle/cpuidle-psci.c b/drivers/cpuidle/cpuidle-psci.c
index b51b5df08450..540105ca0781 100644
--- a/drivers/cpuidle/cpuidle-psci.c
+++ b/drivers/cpuidle/cpuidle-psci.c
@@ -23,6 +23,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/cpuidle.h>
 
@@ -131,6 +132,49 @@ static int psci_idle_cpuhp_down(unsigned int cpu)
 	return 0;
 }
 
+static void psci_idle_syscore_switch(bool suspend)
+{
+	bool cleared = false;
+	struct device *dev;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		dev = per_cpu_ptr(&psci_cpuidle_data, cpu)->dev;
+
+		if (dev && suspend) {
+			dev_pm_genpd_suspend(dev);
+		} else if (dev) {
+			dev_pm_genpd_resume(dev);
+
+			/* Account for userspace having offlined a CPU. */
+			if (pm_runtime_status_suspended(dev))
+				pm_runtime_set_active(dev);
+
+			/* Clear domain state to re-start fresh. */
+			if (!cleared) {
+				psci_set_domain_state(0);
+				cleared = true;
+			}
+		}
+	}
+}
+
+static int psci_idle_syscore_suspend(void)
+{
+	psci_idle_syscore_switch(true);
+	return 0;
+}
+
+static void psci_idle_syscore_resume(void)
+{
+	psci_idle_syscore_switch(false);
+}
+
+static struct syscore_ops psci_idle_syscore_ops = {
+	.suspend = psci_idle_syscore_suspend,
+	.resume = psci_idle_syscore_resume,
+};
+
 static void psci_idle_init_cpuhp(void)
 {
 	int err;
@@ -138,6 +182,8 @@ static void psci_idle_init_cpuhp(void)
 	if (!psci_cpuidle_use_cpuhp)
 		return;
 
+	register_syscore_ops(&psci_idle_syscore_ops);
+
 	err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING,
 					"cpuidle/psci:online",
 					psci_idle_cpuhp_up,
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 027/109] cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode

[Sasha Levin]

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit 171b66e2e2e9d80b93c8cff799e6175074b22297 ]

When PSCI OSI mode is supported the syscore flag is set for the CPU devices
that becomes attached to their PM domains (genpds). In the suspend-to-idle
case, we call dev_pm_genpd_suspend|resume() to allow genpd to properly
manage the power-off/on operations (pick an idlestate and manage the on/off
notifications).

For suspend-to-ram, dev_pm_genpd_suspend|resume() is currently not being
called, which causes a problem that the genpd on/off notifiers do not get
sent as expected. This prevents the platform-specific operations from being
executed, typically needed just before/after the boot CPU is being turned
off/on.

To deal with this problem, let's register a syscore ops for cpuidle-psci
when PSCI OSI mode is being used and call dev_pm_genpd_suspend|resume()
from them. In this way, genpd regains control of the PM domain topology and
then sends the on/off notifications when it's appropriate.

Reported-by: Maulik Shah <quic_mkshah@quicinc.com>
Suggested-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpuidle/cpuidle-psci.c | 46 ++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/cpuidle/cpuidle-psci.c b/drivers/cpuidle/cpuidle-psci.c
index b51b5df08450..540105ca0781 100644
--- a/drivers/cpuidle/cpuidle-psci.c
+++ b/drivers/cpuidle/cpuidle-psci.c
@@ -23,6 +23,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/cpuidle.h>
 
@@ -131,6 +132,49 @@ static int psci_idle_cpuhp_down(unsigned int cpu)
 	return 0;
 }
 
+static void psci_idle_syscore_switch(bool suspend)
+{
+	bool cleared = false;
+	struct device *dev;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		dev = per_cpu_ptr(&psci_cpuidle_data, cpu)->dev;
+
+		if (dev && suspend) {
+			dev_pm_genpd_suspend(dev);
+		} else if (dev) {
+			dev_pm_genpd_resume(dev);
+
+			/* Account for userspace having offlined a CPU. */
+			if (pm_runtime_status_suspended(dev))
+				pm_runtime_set_active(dev);
+
+			/* Clear domain state to re-start fresh. */
+			if (!cleared) {
+				psci_set_domain_state(0);
+				cleared = true;
+			}
+		}
+	}
+}
+
+static int psci_idle_syscore_suspend(void)
+{
+	psci_idle_syscore_switch(true);
+	return 0;
+}
+
+static void psci_idle_syscore_resume(void)
+{
+	psci_idle_syscore_switch(false);
+}
+
+static struct syscore_ops psci_idle_syscore_ops = {
+	.suspend = psci_idle_syscore_suspend,
+	.resume = psci_idle_syscore_resume,
+};
+
 static void psci_idle_init_cpuhp(void)
 {
 	int err;
@@ -138,6 +182,8 @@ static void psci_idle_init_cpuhp(void)
 	if (!psci_cpuidle_use_cpuhp)
 		return;
 
+	register_syscore_ops(&psci_idle_syscore_ops);
+
 	err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING,
 					"cpuidle/psci:online",
 					psci_idle_cpuhp_up,
-- 
2.35.1

[PATCH AUTOSEL 5.15 028/109] drm/amd/pm: fix double free in si_parse_power_table()

[Sasha Levin]

From: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>

[ Upstream commit f3fa2becf2fc25b6ac7cf8d8b1a2e4a86b3b72bd ]

In function si_parse_power_table(), array adev->pm.dpm.ps and its member
is allocated. If the allocation of each member fails, the array itself
is freed and returned with an error code. However, the array is later
freed again in si_dpm_fini() function which is called when the function
returns an error.

This leads to potential double free of the array adev->pm.dpm.ps, as
well as leak of its array members, since the members are not freed in
the allocation function and the array is not nulled when freed.
In addition adev->pm.dpm.num_ps, which keeps track of the allocated
array member, is not updated until the member allocation is
successfully finished, this could also lead to either use after free,
or uninitialized variable access in si_dpm_fini().

Fix this by postponing the free of the array until si_dpm_fini() and
increment adev->pm.dpm.num_ps everytime the array member is allocated.

Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/powerplay/si_dpm.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c b/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c
index 81f82aa05ec2..66fc63f1f1c1 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c
@@ -7247,17 +7247,15 @@ static int si_parse_power_table(struct amdgpu_device *adev)
 	if (!adev->pm.dpm.ps)
 		return -ENOMEM;
 	power_state_offset = (u8 *)state_array->states;
-	for (i = 0; i < state_array->ucNumEntries; i++) {
+	for (adev->pm.dpm.num_ps = 0, i = 0; i < state_array->ucNumEntries; i++) {
 		u8 *idx;
 		power_state = (union pplib_power_state *)power_state_offset;
 		non_clock_array_index = power_state->v2.nonClockInfoIndex;
 		non_clock_info = (struct _ATOM_PPLIB_NONCLOCK_INFO *)
 			&non_clock_info_array->nonClockInfo[non_clock_array_index];
 		ps = kzalloc(sizeof(struct  si_ps), GFP_KERNEL);
-		if (ps == NULL) {
-			kfree(adev->pm.dpm.ps);
+		if (ps == NULL)
 			return -ENOMEM;
-		}
 		adev->pm.dpm.ps[i].ps_priv = ps;
 		si_parse_pplib_non_clock_info(adev, &adev->pm.dpm.ps[i],
 					      non_clock_info,
@@ -7279,8 +7277,8 @@ static int si_parse_power_table(struct amdgpu_device *adev)
 			k++;
 		}
 		power_state_offset += 2 + power_state->v2.ucNumDPMLevels;
+		adev->pm.dpm.num_ps++;
 	}
-	adev->pm.dpm.num_ps = state_array->ucNumEntries;
 
 	/* fill in the vce power states */
 	for (i = 0; i < adev->pm.dpm.num_of_vce_states; i++) {
-- 
2.35.1

[PATCH AUTOSEL 5.15 029/109] ASoC: rsnd: care default case on rsnd_ssiu_busif_err_status_clear()

[Sasha Levin]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit b1384d4c95088d01f4266237faabf165d3d605fc ]

commit cfb7b8bf1e2d66 ("ASoC: rsnd: tidyup
rsnd_ssiu_busif_err_status_clear()") merged duplicate code, but it didn't
care about default case, and causes smatch warnings.

smatch warnings:
sound/soc/sh/rcar/ssiu.c:112 rsnd_ssiu_busif_err_status_clear() \
	error: uninitialized symbol 'offset'.
sound/soc/sh/rcar/ssiu.c:114 rsnd_ssiu_busif_err_status_clear() \
	error: uninitialized symbol 'shift'.

This patch cares it.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r15rgn6p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssiu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssiu.c b/sound/soc/sh/rcar/ssiu.c
index 0d8f97633dd2..138f95dd9f4a 100644
--- a/sound/soc/sh/rcar/ssiu.c
+++ b/sound/soc/sh/rcar/ssiu.c
@@ -102,6 +102,8 @@ bool rsnd_ssiu_busif_err_status_clear(struct rsnd_mod *mod)
 		shift  = 1;
 		offset = 1;
 		break;
+	default:
+		goto out;
 	}
 
 	for (i = 0; i < 4; i++) {
@@ -120,7 +122,7 @@ bool rsnd_ssiu_busif_err_status_clear(struct rsnd_mod *mod)
 		}
 		rsnd_mod_write(mod, reg, val);
 	}
-
+out:
 	return error;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 029/109] ASoC: rsnd: care default case on rsnd_ssiu_busif_err_status_clear()

[Sasha Levin]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit b1384d4c95088d01f4266237faabf165d3d605fc ]

commit cfb7b8bf1e2d66 ("ASoC: rsnd: tidyup
rsnd_ssiu_busif_err_status_clear()") merged duplicate code, but it didn't
care about default case, and causes smatch warnings.

smatch warnings:
sound/soc/sh/rcar/ssiu.c:112 rsnd_ssiu_busif_err_status_clear() \
	error: uninitialized symbol 'offset'.
sound/soc/sh/rcar/ssiu.c:114 rsnd_ssiu_busif_err_status_clear() \
	error: uninitialized symbol 'shift'.

This patch cares it.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r15rgn6p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssiu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssiu.c b/sound/soc/sh/rcar/ssiu.c
index 0d8f97633dd2..138f95dd9f4a 100644
--- a/sound/soc/sh/rcar/ssiu.c
+++ b/sound/soc/sh/rcar/ssiu.c
@@ -102,6 +102,8 @@ bool rsnd_ssiu_busif_err_status_clear(struct rsnd_mod *mod)
 		shift  = 1;
 		offset = 1;
 		break;
+	default:
+		goto out;
 	}
 
 	for (i = 0; i < 4; i++) {
@@ -120,7 +122,7 @@ bool rsnd_ssiu_busif_err_status_clear(struct rsnd_mod *mod)
 		}
 		rsnd_mod_write(mod, reg, val);
 	}
-
+out:
 	return error;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 030/109] ASoC: rsnd: care return value from rsnd_node_fixed_index()

[Sasha Levin]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit d09a7db431c65aaa8303eb456439d1831ca2e6b4 ]

Renesas Sound is very complex, and thus it needs to use
rsnd_node_fixed_index() to know enabled pin index.

It returns error if strange pin was selected,
but some codes didn't check it.

This patch 1) indicates error message, 2) check return
value.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmlbgn5t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/core.c | 15 ++++++++++-----
 sound/soc/sh/rcar/dma.c  |  9 ++++++++-
 sound/soc/sh/rcar/rsnd.h |  2 +-
 sound/soc/sh/rcar/src.c  |  7 ++++++-
 sound/soc/sh/rcar/ssi.c  | 14 ++++++++++++--
 sound/soc/sh/rcar/ssiu.c |  7 ++++++-
 6 files changed, 43 insertions(+), 11 deletions(-)

diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c
index 6a8fe0da7670..af8ef2a27d34 100644
--- a/sound/soc/sh/rcar/core.c
+++ b/sound/soc/sh/rcar/core.c
@@ -1159,6 +1159,7 @@ void rsnd_parse_connect_common(struct rsnd_dai *rdai, char *name,
 		struct device_node *capture)
 {
 	struct rsnd_priv *priv = rsnd_rdai_to_priv(rdai);
+	struct device *dev = rsnd_priv_to_dev(priv);
 	struct device_node *np;
 	int i;
 
@@ -1169,7 +1170,11 @@ void rsnd_parse_connect_common(struct rsnd_dai *rdai, char *name,
 	for_each_child_of_node(node, np) {
 		struct rsnd_mod *mod;
 
-		i = rsnd_node_fixed_index(np, name, i);
+		i = rsnd_node_fixed_index(dev, np, name, i);
+		if (i < 0) {
+			of_node_put(np);
+			break;
+		}
 
 		mod = mod_get(priv, i);
 
@@ -1183,7 +1188,7 @@ void rsnd_parse_connect_common(struct rsnd_dai *rdai, char *name,
 	of_node_put(node);
 }
 
-int rsnd_node_fixed_index(struct device_node *node, char *name, int idx)
+int rsnd_node_fixed_index(struct device *dev, struct device_node *node, char *name, int idx)
 {
 	char node_name[16];
 
@@ -1210,6 +1215,8 @@ int rsnd_node_fixed_index(struct device_node *node, char *name, int idx)
 			return idx;
 	}
 
+	dev_err(dev, "strange node numbering (%s)",
+		of_node_full_name(node));
 	return -EINVAL;
 }
 
@@ -1221,10 +1228,8 @@ int rsnd_node_count(struct rsnd_priv *priv, struct device_node *node, char *name
 
 	i = 0;
 	for_each_child_of_node(node, np) {
-		i = rsnd_node_fixed_index(np, name, i);
+		i = rsnd_node_fixed_index(dev, np, name, i);
 		if (i < 0) {
-			dev_err(dev, "strange node numbering (%s)",
-				of_node_full_name(node));
 			of_node_put(np);
 			return 0;
 		}
diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c
index 03e0d4eca781..463ab237d7bd 100644
--- a/sound/soc/sh/rcar/dma.c
+++ b/sound/soc/sh/rcar/dma.c
@@ -240,12 +240,19 @@ static int rsnd_dmaen_start(struct rsnd_mod *mod,
 struct dma_chan *rsnd_dma_request_channel(struct device_node *of_node, char *name,
 					  struct rsnd_mod *mod, char *x)
 {
+	struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
+	struct device *dev = rsnd_priv_to_dev(priv);
 	struct dma_chan *chan = NULL;
 	struct device_node *np;
 	int i = 0;
 
 	for_each_child_of_node(of_node, np) {
-		i = rsnd_node_fixed_index(np, name, i);
+		i = rsnd_node_fixed_index(dev, np, name, i);
+		if (i < 0) {
+			chan = NULL;
+			of_node_put(np);
+			break;
+		}
 
 		if (i == rsnd_mod_id_raw(mod) && (!chan))
 			chan = of_dma_request_slave_channel(np, x);
diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h
index 6580bab0e229..d9cd190d7e19 100644
--- a/sound/soc/sh/rcar/rsnd.h
+++ b/sound/soc/sh/rcar/rsnd.h
@@ -460,7 +460,7 @@ void rsnd_parse_connect_common(struct rsnd_dai *rdai, char *name,
 		struct device_node *playback,
 		struct device_node *capture);
 int rsnd_node_count(struct rsnd_priv *priv, struct device_node *node, char *name);
-int rsnd_node_fixed_index(struct device_node *node, char *name, int idx);
+int rsnd_node_fixed_index(struct device *dev, struct device_node *node, char *name, int idx);
 
 int rsnd_channel_normalization(int chan);
 #define rsnd_runtime_channel_original(io) \
diff --git a/sound/soc/sh/rcar/src.c b/sound/soc/sh/rcar/src.c
index 42a100c6303d..0ea84ae57c6a 100644
--- a/sound/soc/sh/rcar/src.c
+++ b/sound/soc/sh/rcar/src.c
@@ -676,7 +676,12 @@ int rsnd_src_probe(struct rsnd_priv *priv)
 		if (!of_device_is_available(np))
 			goto skip;
 
-		i = rsnd_node_fixed_index(np, SRC_NAME, i);
+		i = rsnd_node_fixed_index(dev, np, SRC_NAME, i);
+		if (i < 0) {
+			ret = -EINVAL;
+			of_node_put(np);
+			goto rsnd_src_probe_done;
+		}
 
 		src = rsnd_src_get(priv, i);
 
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 87e606f688d3..43c5e27dc5c8 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -1105,6 +1105,7 @@ void rsnd_parse_connect_ssi(struct rsnd_dai *rdai,
 			    struct device_node *capture)
 {
 	struct rsnd_priv *priv = rsnd_rdai_to_priv(rdai);
+	struct device *dev = rsnd_priv_to_dev(priv);
 	struct device_node *node;
 	struct device_node *np;
 	int i;
@@ -1117,7 +1118,11 @@ void rsnd_parse_connect_ssi(struct rsnd_dai *rdai,
 	for_each_child_of_node(node, np) {
 		struct rsnd_mod *mod;
 
-		i = rsnd_node_fixed_index(np, SSI_NAME, i);
+		i = rsnd_node_fixed_index(dev, np, SSI_NAME, i);
+		if (i < 0) {
+			of_node_put(np);
+			break;
+		}
 
 		mod = rsnd_ssi_mod_get(priv, i);
 
@@ -1182,7 +1187,12 @@ int rsnd_ssi_probe(struct rsnd_priv *priv)
 		if (!of_device_is_available(np))
 			goto skip;
 
-		i = rsnd_node_fixed_index(np, SSI_NAME, i);
+		i = rsnd_node_fixed_index(dev, np, SSI_NAME, i);
+		if (i < 0) {
+			ret = -EINVAL;
+			of_node_put(np);
+			goto rsnd_ssi_probe_done;
+		}
 
 		ssi = rsnd_ssi_get(priv, i);
 
diff --git a/sound/soc/sh/rcar/ssiu.c b/sound/soc/sh/rcar/ssiu.c
index 138f95dd9f4a..4b8a63e336c7 100644
--- a/sound/soc/sh/rcar/ssiu.c
+++ b/sound/soc/sh/rcar/ssiu.c
@@ -462,6 +462,7 @@ void rsnd_parse_connect_ssiu(struct rsnd_dai *rdai,
 			     struct device_node *capture)
 {
 	struct rsnd_priv *priv = rsnd_rdai_to_priv(rdai);
+	struct device *dev = rsnd_priv_to_dev(priv);
 	struct device_node *node = rsnd_ssiu_of_node(priv);
 	struct rsnd_dai_stream *io_p = &rdai->playback;
 	struct rsnd_dai_stream *io_c = &rdai->capture;
@@ -474,7 +475,11 @@ void rsnd_parse_connect_ssiu(struct rsnd_dai *rdai,
 		for_each_child_of_node(node, np) {
 			struct rsnd_mod *mod;
 
-			i = rsnd_node_fixed_index(np, SSIU_NAME, i);
+			i = rsnd_node_fixed_index(dev, np, SSIU_NAME, i);
+			if (i < 0) {
+				of_node_put(np);
+				break;
+			}
 
 			mod = rsnd_ssiu_mod_get(priv, i);
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 030/109] ASoC: rsnd: care return value from rsnd_node_fixed_index()

[Sasha Levin]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit d09a7db431c65aaa8303eb456439d1831ca2e6b4 ]

Renesas Sound is very complex, and thus it needs to use
rsnd_node_fixed_index() to know enabled pin index.

It returns error if strange pin was selected,
but some codes didn't check it.

This patch 1) indicates error message, 2) check return
value.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmlbgn5t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/core.c | 15 ++++++++++-----
 sound/soc/sh/rcar/dma.c  |  9 ++++++++-
 sound/soc/sh/rcar/rsnd.h |  2 +-
 sound/soc/sh/rcar/src.c  |  7 ++++++-
 sound/soc/sh/rcar/ssi.c  | 14 ++++++++++++--
 sound/soc/sh/rcar/ssiu.c |  7 ++++++-
 6 files changed, 43 insertions(+), 11 deletions(-)

diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c
index 6a8fe0da7670..af8ef2a27d34 100644
--- a/sound/soc/sh/rcar/core.c
+++ b/sound/soc/sh/rcar/core.c
@@ -1159,6 +1159,7 @@ void rsnd_parse_connect_common(struct rsnd_dai *rdai, char *name,
 		struct device_node *capture)
 {
 	struct rsnd_priv *priv = rsnd_rdai_to_priv(rdai);
+	struct device *dev = rsnd_priv_to_dev(priv);
 	struct device_node *np;
 	int i;
 
@@ -1169,7 +1170,11 @@ void rsnd_parse_connect_common(struct rsnd_dai *rdai, char *name,
 	for_each_child_of_node(node, np) {
 		struct rsnd_mod *mod;
 
-		i = rsnd_node_fixed_index(np, name, i);
+		i = rsnd_node_fixed_index(dev, np, name, i);
+		if (i < 0) {
+			of_node_put(np);
+			break;
+		}
 
 		mod = mod_get(priv, i);
 
@@ -1183,7 +1188,7 @@ void rsnd_parse_connect_common(struct rsnd_dai *rdai, char *name,
 	of_node_put(node);
 }
 
-int rsnd_node_fixed_index(struct device_node *node, char *name, int idx)
+int rsnd_node_fixed_index(struct device *dev, struct device_node *node, char *name, int idx)
 {
 	char node_name[16];
 
@@ -1210,6 +1215,8 @@ int rsnd_node_fixed_index(struct device_node *node, char *name, int idx)
 			return idx;
 	}
 
+	dev_err(dev, "strange node numbering (%s)",
+		of_node_full_name(node));
 	return -EINVAL;
 }
 
@@ -1221,10 +1228,8 @@ int rsnd_node_count(struct rsnd_priv *priv, struct device_node *node, char *name
 
 	i = 0;
 	for_each_child_of_node(node, np) {
-		i = rsnd_node_fixed_index(np, name, i);
+		i = rsnd_node_fixed_index(dev, np, name, i);
 		if (i < 0) {
-			dev_err(dev, "strange node numbering (%s)",
-				of_node_full_name(node));
 			of_node_put(np);
 			return 0;
 		}
diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c
index 03e0d4eca781..463ab237d7bd 100644
--- a/sound/soc/sh/rcar/dma.c
+++ b/sound/soc/sh/rcar/dma.c
@@ -240,12 +240,19 @@ static int rsnd_dmaen_start(struct rsnd_mod *mod,
 struct dma_chan *rsnd_dma_request_channel(struct device_node *of_node, char *name,
 					  struct rsnd_mod *mod, char *x)
 {
+	struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
+	struct device *dev = rsnd_priv_to_dev(priv);
 	struct dma_chan *chan = NULL;
 	struct device_node *np;
 	int i = 0;
 
 	for_each_child_of_node(of_node, np) {
-		i = rsnd_node_fixed_index(np, name, i);
+		i = rsnd_node_fixed_index(dev, np, name, i);
+		if (i < 0) {
+			chan = NULL;
+			of_node_put(np);
+			break;
+		}
 
 		if (i == rsnd_mod_id_raw(mod) && (!chan))
 			chan = of_dma_request_slave_channel(np, x);
diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h
index 6580bab0e229..d9cd190d7e19 100644
--- a/sound/soc/sh/rcar/rsnd.h
+++ b/sound/soc/sh/rcar/rsnd.h
@@ -460,7 +460,7 @@ void rsnd_parse_connect_common(struct rsnd_dai *rdai, char *name,
 		struct device_node *playback,
 		struct device_node *capture);
 int rsnd_node_count(struct rsnd_priv *priv, struct device_node *node, char *name);
-int rsnd_node_fixed_index(struct device_node *node, char *name, int idx);
+int rsnd_node_fixed_index(struct device *dev, struct device_node *node, char *name, int idx);
 
 int rsnd_channel_normalization(int chan);
 #define rsnd_runtime_channel_original(io) \
diff --git a/sound/soc/sh/rcar/src.c b/sound/soc/sh/rcar/src.c
index 42a100c6303d..0ea84ae57c6a 100644
--- a/sound/soc/sh/rcar/src.c
+++ b/sound/soc/sh/rcar/src.c
@@ -676,7 +676,12 @@ int rsnd_src_probe(struct rsnd_priv *priv)
 		if (!of_device_is_available(np))
 			goto skip;
 
-		i = rsnd_node_fixed_index(np, SRC_NAME, i);
+		i = rsnd_node_fixed_index(dev, np, SRC_NAME, i);
+		if (i < 0) {
+			ret = -EINVAL;
+			of_node_put(np);
+			goto rsnd_src_probe_done;
+		}
 
 		src = rsnd_src_get(priv, i);
 
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 87e606f688d3..43c5e27dc5c8 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -1105,6 +1105,7 @@ void rsnd_parse_connect_ssi(struct rsnd_dai *rdai,
 			    struct device_node *capture)
 {
 	struct rsnd_priv *priv = rsnd_rdai_to_priv(rdai);
+	struct device *dev = rsnd_priv_to_dev(priv);
 	struct device_node *node;
 	struct device_node *np;
 	int i;
@@ -1117,7 +1118,11 @@ void rsnd_parse_connect_ssi(struct rsnd_dai *rdai,
 	for_each_child_of_node(node, np) {
 		struct rsnd_mod *mod;
 
-		i = rsnd_node_fixed_index(np, SSI_NAME, i);
+		i = rsnd_node_fixed_index(dev, np, SSI_NAME, i);
+		if (i < 0) {
+			of_node_put(np);
+			break;
+		}
 
 		mod = rsnd_ssi_mod_get(priv, i);
 
@@ -1182,7 +1187,12 @@ int rsnd_ssi_probe(struct rsnd_priv *priv)
 		if (!of_device_is_available(np))
 			goto skip;
 
-		i = rsnd_node_fixed_index(np, SSI_NAME, i);
+		i = rsnd_node_fixed_index(dev, np, SSI_NAME, i);
+		if (i < 0) {
+			ret = -EINVAL;
+			of_node_put(np);
+			goto rsnd_ssi_probe_done;
+		}
 
 		ssi = rsnd_ssi_get(priv, i);
 
diff --git a/sound/soc/sh/rcar/ssiu.c b/sound/soc/sh/rcar/ssiu.c
index 138f95dd9f4a..4b8a63e336c7 100644
--- a/sound/soc/sh/rcar/ssiu.c
+++ b/sound/soc/sh/rcar/ssiu.c
@@ -462,6 +462,7 @@ void rsnd_parse_connect_ssiu(struct rsnd_dai *rdai,
 			     struct device_node *capture)
 {
 	struct rsnd_priv *priv = rsnd_rdai_to_priv(rdai);
+	struct device *dev = rsnd_priv_to_dev(priv);
 	struct device_node *node = rsnd_ssiu_of_node(priv);
 	struct rsnd_dai_stream *io_p = &rdai->playback;
 	struct rsnd_dai_stream *io_c = &rdai->capture;
@@ -474,7 +475,11 @@ void rsnd_parse_connect_ssiu(struct rsnd_dai *rdai,
 		for_each_child_of_node(node, np) {
 			struct rsnd_mod *mod;
 
-			i = rsnd_node_fixed_index(np, SSIU_NAME, i);
+			i = rsnd_node_fixed_index(dev, np, SSIU_NAME, i);
+			if (i < 0) {
+				of_node_put(np);
+				break;
+			}
 
 			mod = rsnd_ssiu_mod_get(priv, i);
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 031/109] ath9k: fix QCA9561 PA bias level

[Sasha Levin]

From: Thibaut VARÈNE <hacks+kernel@slashdirt.org>

[ Upstream commit e999a5da28a0e0f7de242d841ef7d5e48f4646ae ]

This patch fixes an invalid TX PA DC bias level on QCA9561, which
results in a very low output power and very low throughput as devices
are further away from the AP (compared to other 2.4GHz APs).

This patch was suggested by Felix Fietkau, who noted[1]:
"The value written to that register is wrong, because while the mask
definition AR_CH0_TOP2_XPABIASLVL uses a different value for 9561, the
shift definition AR_CH0_TOP2_XPABIASLVL_S is hardcoded to 12, which is
wrong for 9561."

In real life testing, without this patch the 2.4GHz throughput on
Yuncore XD3200 is around 10Mbps sitting next to the AP, and closer to
practical maximum with the patch applied.

[1] https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.name

Signed-off-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220417145145.1847-1-hacks+kernel@slashdirt.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index a171dbb29fbb..ad949eb02f3d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -720,7 +720,7 @@
 #define AR_CH0_TOP2		(AR_SREV_9300(ah) ? 0x1628c : \
 					(AR_SREV_9462(ah) ? 0x16290 : 0x16284))
 #define AR_CH0_TOP2_XPABIASLVL		(AR_SREV_9561(ah) ? 0x1e00 : 0xf000)
-#define AR_CH0_TOP2_XPABIASLVL_S	12
+#define AR_CH0_TOP2_XPABIASLVL_S	(AR_SREV_9561(ah) ? 9 : 12)
 
 #define AR_CH0_XTAL		(AR_SREV_9300(ah) ? 0x16294 : \
 				 ((AR_SREV_9462(ah) || AR_SREV_9565(ah)) ? 0x16298 : \
-- 
2.35.1

[PATCH AUTOSEL 5.15 032/109] media: venus: hfi: avoid null dereference in deinit

[Sasha Levin]

From: Luca Weiss <luca.weiss@fairphone.com>

[ Upstream commit 86594f6af867b5165d2ba7b5a71fae3a5961e56c ]

If venus_probe fails at pm_runtime_put_sync the error handling first
calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets
core->ops to NULL, hfi_core_deinit cannot call the core_deinit function
anymore.

Avoid this null pointer derefence by skipping the call when necessary.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/qcom/venus/hfi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/platform/qcom/venus/hfi.c b/drivers/media/platform/qcom/venus/hfi.c
index 0f2482367e06..9bc4becdf638 100644
--- a/drivers/media/platform/qcom/venus/hfi.c
+++ b/drivers/media/platform/qcom/venus/hfi.c
@@ -104,6 +104,9 @@ int hfi_core_deinit(struct venus_core *core, bool blocking)
 		mutex_lock(&core->lock);
 	}
 
+	if (!core->ops)
+		goto unlock;
+
 	ret = core->ops->core_deinit(core);
 
 	if (!ret)
-- 
2.35.1

[PATCH AUTOSEL 5.15 033/109] media: pci: cx23885: Fix the error handling in cx23885_initdev()

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit e8123311cf06d7dae71e8c5fe78e0510d20cd30b ]

When the driver fails to call the dma_set_mask(), the driver will get
the following splat:

[   55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240
[   55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590
[   55.856822] Call Trace:
[   55.860327]  __process_removed_driver+0x3c/0x240
[   55.861347]  bus_for_each_dev+0x102/0x160
[   55.861681]  i2c_del_driver+0x2f/0x50

This is because the driver has initialized the i2c related resources
in cx23885_dev_setup() but not released them in error handling, fix this
bug by modifying the error path that jumps after failing to call the
dma_set_mask().

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/cx23885/cx23885-core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
index f8f2ff3b00c3..a07b18f2034e 100644
--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -2165,7 +2165,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev,
 	err = dma_set_mask(&pci_dev->dev, 0xffffffff);
 	if (err) {
 		pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
-		goto fail_ctrl;
+		goto fail_dma_set_mask;
 	}
 
 	err = request_irq(pci_dev->irq, cx23885_irq,
@@ -2173,7 +2173,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev,
 	if (err < 0) {
 		pr_err("%s: can't get IRQ %d\n",
 		       dev->name, pci_dev->irq);
-		goto fail_irq;
+		goto fail_dma_set_mask;
 	}
 
 	switch (dev->board) {
@@ -2195,7 +2195,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev,
 
 	return 0;
 
-fail_irq:
+fail_dma_set_mask:
 	cx23885_dev_unregister(dev);
 fail_ctrl:
 	v4l2_ctrl_handler_free(hdl);
-- 
2.35.1

[PATCH AUTOSEL 5.15 034/109] media: cx25821: Fix the warning when removing the module

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 2203436a4d24302871617373a7eb21bc17e38762 ]

When removing the module, we will get the following warning:

[   14.746697] remove_proc_entry: removing non-empty directory 'irq/21', leaking at least 'cx25821[1]'
[   14.747449] WARNING: CPU: 4 PID: 368 at fs/proc/generic.c:717 remove_proc_entry+0x389/0x3f0
[   14.751611] RIP: 0010:remove_proc_entry+0x389/0x3f0
[   14.759589] Call Trace:
[   14.759792]  <TASK>
[   14.759975]  unregister_irq_proc+0x14c/0x170
[   14.760340]  irq_free_descs+0x94/0xe0
[   14.760640]  mp_unmap_irq+0xb6/0x100
[   14.760937]  acpi_unregister_gsi_ioapic+0x27/0x40
[   14.761334]  acpi_pci_irq_disable+0x1d3/0x320
[   14.761688]  pci_disable_device+0x1ad/0x380
[   14.762027]  ? _raw_spin_unlock_irqrestore+0x2d/0x60
[   14.762442]  ? cx25821_shutdown+0x20/0x9f0 [cx25821]
[   14.762848]  cx25821_finidev+0x48/0xc0 [cx25821]
[   14.763242]  pci_device_remove+0x92/0x240

Fix this by freeing the irq before call pci_disable_device().

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/cx25821/cx25821-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/pci/cx25821/cx25821-core.c b/drivers/media/pci/cx25821/cx25821-core.c
index 40c10ca94def..a4192e80e9a0 100644
--- a/drivers/media/pci/cx25821/cx25821-core.c
+++ b/drivers/media/pci/cx25821/cx25821-core.c
@@ -1339,11 +1339,11 @@ static void cx25821_finidev(struct pci_dev *pci_dev)
 	struct cx25821_dev *dev = get_cx25821(v4l2_dev);
 
 	cx25821_shutdown(dev);
-	pci_disable_device(pci_dev);
 
 	/* unregister stuff */
 	if (pci_dev->irq)
 		free_irq(pci_dev->irq, dev);
+	pci_disable_device(pci_dev);
 
 	cx25821_dev_unregister(dev);
 	v4l2_device_unregister(v4l2_dev);
-- 
2.35.1

[PATCH AUTOSEL 5.15 035/109] md/bitmap: don't set sb values if can't pass sanity check

[Sasha Levin]

From: Heming Zhao <heming.zhao@suse.com>

[ Upstream commit e68cb83a57a458b01c9739e2ad9cb70b04d1e6d2 ]

If bitmap area contains invalid data, kernel will crash then mdadm
triggers "Segmentation fault".
This is cluster-md speical bug. In non-clustered env, mdadm will
handle broken metadata case. In clustered array, only kernel space
handles bitmap slot info. But even this bug only happened in clustered
env, current sanity check is wrong, the code should be changed.

How to trigger: (faulty injection)

dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sda
dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sdb
mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb
mdadm -Ss
echo aaa > magic.txt
 == below modifying slot 2 bitmap data ==
dd if=magic.txt of=/dev/sda seek=16384 bs=1 count=3 <== destroy magic
dd if=/dev/zero of=/dev/sda seek=16436 bs=1 count=4 <== ZERO chunksize
mdadm -A /dev/md0 /dev/sda /dev/sdb
 == kernel crashes. mdadm outputs "Segmentation fault" ==

Reason of kernel crash:

In md_bitmap_read_sb (called by md_bitmap_create), bad bitmap magic didn't
block chunksize assignment, and zero value made DIV_ROUND_UP_SECTOR_T()
trigger "divide error".

Crash log:

kernel: md: md0 stopped.
kernel: md/raid1:md0: not clean -- starting background reconstruction
kernel: md/raid1:md0: active with 2 out of 2 mirrors
kernel: dlm: ... ...
kernel: md-cluster: Joined cluster 44810aba-38bb-e6b8-daca-bc97a0b254aa slot 1
kernel: md0: invalid bitmap file superblock: bad magic
kernel: md_bitmap_copy_from_slot can't get bitmap from slot 2
kernel: md-cluster: Could not gather bitmaps from slot 2
kernel: divide error: 0000 [#1] SMP NOPTI
kernel: CPU: 0 PID: 1603 Comm: mdadm Not tainted 5.14.6-1-default
kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod]
kernel: RSP: 0018:ffffc22ac0843ba0 EFLAGS: 00010246
kernel: ... ...
kernel: Call Trace:
kernel:  ? dlm_lock_sync+0xd0/0xd0 [md_cluster 77fe..7a0]
kernel:  md_bitmap_copy_from_slot+0x2c/0x290 [md_mod 24ea..d3a]
kernel:  load_bitmaps+0xec/0x210 [md_cluster 77fe..7a0]
kernel:  md_bitmap_load+0x81/0x1e0 [md_mod 24ea..d3a]
kernel:  do_md_run+0x30/0x100 [md_mod 24ea..d3a]
kernel:  md_ioctl+0x1290/0x15a0 [md_mod 24ea....d3a]
kernel:  ? mddev_unlock+0xaa/0x130 [md_mod 24ea..d3a]
kernel:  ? blkdev_ioctl+0xb1/0x2b0
kernel:  block_ioctl+0x3b/0x40
kernel:  __x64_sys_ioctl+0x7f/0xb0
kernel:  do_syscall_64+0x59/0x80
kernel:  ? exit_to_user_mode_prepare+0x1ab/0x230
kernel:  ? syscall_exit_to_user_mode+0x18/0x40
kernel:  ? do_syscall_64+0x69/0x80
kernel:  entry_SYSCALL_64_after_hwframe+0x44/0xae
kernel: RIP: 0033:0x7f4a15fa722b
kernel: ... ...
kernel: ---[ end trace 8afa7612f559c868 ]---
kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod]

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md-bitmap.c | 44 ++++++++++++++++++++++--------------------
 1 file changed, 23 insertions(+), 21 deletions(-)

diff --git a/drivers/md/md-bitmap.c b/drivers/md/md-bitmap.c
index e29c6298ef5c..8cc11b1987ec 100644
--- a/drivers/md/md-bitmap.c
+++ b/drivers/md/md-bitmap.c
@@ -639,14 +639,6 @@ static int md_bitmap_read_sb(struct bitmap *bitmap)
 	daemon_sleep = le32_to_cpu(sb->daemon_sleep) * HZ;
 	write_behind = le32_to_cpu(sb->write_behind);
 	sectors_reserved = le32_to_cpu(sb->sectors_reserved);
-	/* Setup nodes/clustername only if bitmap version is
-	 * cluster-compatible
-	 */
-	if (sb->version == cpu_to_le32(BITMAP_MAJOR_CLUSTERED)) {
-		nodes = le32_to_cpu(sb->nodes);
-		strlcpy(bitmap->mddev->bitmap_info.cluster_name,
-				sb->cluster_name, 64);
-	}
 
 	/* verify that the bitmap-specific fields are valid */
 	if (sb->magic != cpu_to_le32(BITMAP_MAGIC))
@@ -668,6 +660,16 @@ static int md_bitmap_read_sb(struct bitmap *bitmap)
 		goto out;
 	}
 
+	/*
+	 * Setup nodes/clustername only if bitmap version is
+	 * cluster-compatible
+	 */
+	if (sb->version == cpu_to_le32(BITMAP_MAJOR_CLUSTERED)) {
+		nodes = le32_to_cpu(sb->nodes);
+		strlcpy(bitmap->mddev->bitmap_info.cluster_name,
+				sb->cluster_name, 64);
+	}
+
 	/* keep the array size field of the bitmap superblock up to date */
 	sb->sync_size = cpu_to_le64(bitmap->mddev->resync_max_sectors);
 
@@ -700,9 +702,9 @@ static int md_bitmap_read_sb(struct bitmap *bitmap)
 
 out:
 	kunmap_atomic(sb);
-	/* Assigning chunksize is required for "re_read" */
-	bitmap->mddev->bitmap_info.chunksize = chunksize;
 	if (err == 0 && nodes && (bitmap->cluster_slot < 0)) {
+		/* Assigning chunksize is required for "re_read" */
+		bitmap->mddev->bitmap_info.chunksize = chunksize;
 		err = md_setup_cluster(bitmap->mddev, nodes);
 		if (err) {
 			pr_warn("%s: Could not setup cluster service (%d)\n",
@@ -713,18 +715,18 @@ static int md_bitmap_read_sb(struct bitmap *bitmap)
 		goto re_read;
 	}
 
-
 out_no_sb:
-	if (test_bit(BITMAP_STALE, &bitmap->flags))
-		bitmap->events_cleared = bitmap->mddev->events;
-	bitmap->mddev->bitmap_info.chunksize = chunksize;
-	bitmap->mddev->bitmap_info.daemon_sleep = daemon_sleep;
-	bitmap->mddev->bitmap_info.max_write_behind = write_behind;
-	bitmap->mddev->bitmap_info.nodes = nodes;
-	if (bitmap->mddev->bitmap_info.space == 0 ||
-	    bitmap->mddev->bitmap_info.space > sectors_reserved)
-		bitmap->mddev->bitmap_info.space = sectors_reserved;
-	if (err) {
+	if (err == 0) {
+		if (test_bit(BITMAP_STALE, &bitmap->flags))
+			bitmap->events_cleared = bitmap->mddev->events;
+		bitmap->mddev->bitmap_info.chunksize = chunksize;
+		bitmap->mddev->bitmap_info.daemon_sleep = daemon_sleep;
+		bitmap->mddev->bitmap_info.max_write_behind = write_behind;
+		bitmap->mddev->bitmap_info.nodes = nodes;
+		if (bitmap->mddev->bitmap_info.space == 0 ||
+			bitmap->mddev->bitmap_info.space > sectors_reserved)
+			bitmap->mddev->bitmap_info.space = sectors_reserved;
+	} else {
 		md_bitmap_print_sb(bitmap);
 		if (bitmap->cluster_slot < 0)
 			md_cluster_stop(bitmap->mddev);
-- 
2.35.1

[PATCH AUTOSEL 5.15 036/109] mmc: jz4740: Apply DMA engine limits to maximum segment size

[Sasha Levin]

From: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>

[ Upstream commit afadb04f1d6e74b18a253403f5274cde5e3fd7bd ]

Do what is done in other DMA-enabled MMC host drivers (cf. host/mmci.c) and
limit the maximum segment size based on the DMA engine's capabilities. This
is needed to avoid warnings like the following with CONFIG_DMA_API_DEBUG=y.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 21 at kernel/dma/debug.c:1162 debug_dma_map_sg+0x2f4/0x39c
DMA-API: jz4780-dma 13420000.dma-controller: mapping sg segment longer than device claims to support [len=98304] [max=65536]
CPU: 0 PID: 21 Comm: kworker/0:1H Not tainted 5.18.0-rc1 #19
Workqueue: kblockd blk_mq_run_work_fn
Stack : 81575aec 00000004 80620000 80620000 80620000 805e7358 00000009 801537ac
        814c832c 806276e3 806e34b4 80620000 81575aec 00000001 81575ab8 09291444
        00000000 00000000 805e7358 81575958 ffffffea 8157596c 00000000 636f6c62
        6220646b 80387a70 0000000f 6d5f6b6c 80620000 00000000 81575ba4 00000009
        805e170c 80896640 00000001 00010000 00000000 00000000 00006098 806e0000
        ...
Call Trace:
[<80107670>] show_stack+0x84/0x120
[<80528cd8>] __warn+0xb8/0xec
[<80528d78>] warn_slowpath_fmt+0x6c/0xb8
[<8016f1d4>] debug_dma_map_sg+0x2f4/0x39c
[<80169d4c>] __dma_map_sg_attrs+0xf0/0x118
[<8016a27c>] dma_map_sg_attrs+0x14/0x28
[<804f66b4>] jz4740_mmc_prepare_dma_data+0x74/0xa4
[<804f6714>] jz4740_mmc_pre_request+0x30/0x54
[<804f4ff4>] mmc_blk_mq_issue_rq+0x6e0/0x7bc
[<804f5590>] mmc_mq_queue_rq+0x220/0x2d4
[<8038b2c0>] blk_mq_dispatch_rq_list+0x480/0x664
[<80391040>] blk_mq_do_dispatch_sched+0x2dc/0x370
[<80391468>] __blk_mq_sched_dispatch_requests+0xec/0x164
[<80391540>] blk_mq_sched_dispatch_requests+0x44/0x94
[<80387900>] __blk_mq_run_hw_queue+0xb0/0xcc
[<80134c14>] process_one_work+0x1b8/0x264
[<80134ff8>] worker_thread+0x2ec/0x3b8
[<8013b13c>] kthread+0x104/0x10c
[<80101dcc>] ret_from_kernel_thread+0x14/0x1c

---[ end trace 0000000000000000 ]---

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220411153753.50443-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/jz4740_mmc.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 80a2c270d502..3c59dec08c3b 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -235,6 +235,26 @@ static int jz4740_mmc_acquire_dma_channels(struct jz4740_mmc_host *host)
 		return PTR_ERR(host->dma_rx);
 	}
 
+	/*
+	 * Limit the maximum segment size in any SG entry according to
+	 * the parameters of the DMA engine device.
+	 */
+	if (host->dma_tx) {
+		struct device *dev = host->dma_tx->device->dev;
+		unsigned int max_seg_size = dma_get_max_seg_size(dev);
+
+		if (max_seg_size < host->mmc->max_seg_size)
+			host->mmc->max_seg_size = max_seg_size;
+	}
+
+	if (host->dma_rx) {
+		struct device *dev = host->dma_rx->device->dev;
+		unsigned int max_seg_size = dma_get_max_seg_size(dev);
+
+		if (max_seg_size < host->mmc->max_seg_size)
+			host->mmc->max_seg_size = max_seg_size;
+	}
+
 	return 0;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 037/109] drivers: mmc: sdhci_am654: Add the quirk to set TESTCD bit

[Sasha Levin]

From: Vignesh Raghavendra <vigneshr@ti.com>

[ Upstream commit c7666240ec76422cb7546bd07cc8ae80dc0ccdd2 ]

The ARASAN MMC controller on Keystone 3 class of devices need the SDCD
line to be connected for proper functioning. Similar to the issue pointed
out in sdhci-of-arasan.c driver, commit 3794c542641f ("mmc:
sdhci-of-arasan: Set controller to test mode when no CD bit").

In cases where this can't be connected, add a quirk to force the
controller into test mode and set the TESTCD bit. Use the flag
"ti,fails-without-test-cd", to implement this above quirk when required.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220425063120.10135-3-a-govindraju@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci_am654.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index b4891bb26648..a3e62e212631 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -147,6 +147,9 @@ struct sdhci_am654_data {
 	int drv_strength;
 	int strb_sel;
 	u32 flags;
+	u32 quirks;
+
+#define SDHCI_AM654_QUIRK_FORCE_CDTEST BIT(0)
 };
 
 struct sdhci_am654_driver_data {
@@ -369,6 +372,21 @@ static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
 	}
 }
 
+static void sdhci_am654_reset(struct sdhci_host *host, u8 mask)
+{
+	u8 ctrl;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
+
+	sdhci_reset(host, mask);
+
+	if (sdhci_am654->quirks & SDHCI_AM654_QUIRK_FORCE_CDTEST) {
+		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+		ctrl |= SDHCI_CTRL_CDTEST_INS | SDHCI_CTRL_CDTEST_EN;
+		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+	}
+}
+
 static int sdhci_am654_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
@@ -500,7 +518,7 @@ static struct sdhci_ops sdhci_j721e_4bit_ops = {
 	.set_clock = sdhci_j721e_4bit_set_clock,
 	.write_b = sdhci_am654_write_b,
 	.irq = sdhci_am654_cqhci_irq,
-	.reset = sdhci_reset,
+	.reset = sdhci_am654_reset,
 };
 
 static const struct sdhci_pltfm_data sdhci_j721e_4bit_pdata = {
@@ -719,6 +737,9 @@ static int sdhci_am654_get_of_property(struct platform_device *pdev,
 	device_property_read_u32(dev, "ti,clkbuf-sel",
 				 &sdhci_am654->clkbuf_sel);
 
+	if (device_property_read_bool(dev, "ti,fails-without-test-cd"))
+		sdhci_am654->quirks |= SDHCI_AM654_QUIRK_FORCE_CDTEST;
+
 	sdhci_get_of_property(pdev);
 
 	return 0;
-- 
2.35.1

[PATCH AUTOSEL 5.15 038/109] drm/sun4i: Add support for D1 TCONs

[Sasha Levin]

From: Samuel Holland <samuel@sholland.org>

[ Upstream commit b9b52d2f4aafa2bd637ace0f24615bdad8e49f01 ]

D1 has a TCON TOP, so its quirks are similar to those for the R40 TCONs.
While there are some register changes, the part of the TCON TV supported
by the driver matches the R40 quirks, so that quirks structure can be
reused. D1 has the first supported TCON LCD with a TCON TOP, so the TCON
LCD needs a new quirks structure.

D1's TCON LCD hardware supports LVDS; in fact it provides dual-link LVDS
from a single TCON. However, it comes with a brand new LVDS PHY. Since
this PHY has not been tested, leave out LVDS driver support for now.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-14-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 9f06dec0fc61..e27103f5a075 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -1544,6 +1544,12 @@ static const struct sun4i_tcon_quirks sun9i_a80_tcon_tv_quirks = {
 	.needs_edp_reset = true,
 };
 
+static const struct sun4i_tcon_quirks sun20i_d1_lcd_quirks = {
+	.has_channel_0		= true,
+	.dclk_min_div		= 1,
+	.set_mux		= sun8i_r40_tcon_tv_set_mux,
+};
+
 /* sun4i_drv uses this list to check if a device node is a TCON */
 const struct of_device_id sun4i_tcon_of_table[] = {
 	{ .compatible = "allwinner,sun4i-a10-tcon", .data = &sun4i_a10_quirks },
@@ -1561,6 +1567,8 @@ const struct of_device_id sun4i_tcon_of_table[] = {
 	{ .compatible = "allwinner,sun8i-v3s-tcon", .data = &sun8i_v3s_quirks },
 	{ .compatible = "allwinner,sun9i-a80-tcon-lcd", .data = &sun9i_a80_tcon_lcd_quirks },
 	{ .compatible = "allwinner,sun9i-a80-tcon-tv", .data = &sun9i_a80_tcon_tv_quirks },
+	{ .compatible = "allwinner,sun20i-d1-tcon-lcd", .data = &sun20i_d1_lcd_quirks },
+	{ .compatible = "allwinner,sun20i-d1-tcon-tv", .data = &sun8i_r40_tv_quirks },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table);
-- 
2.35.1

[PATCH AUTOSEL 5.15 038/109] drm/sun4i: Add support for D1 TCONs

[Sasha Levin]

From: Samuel Holland <samuel@sholland.org>

[ Upstream commit b9b52d2f4aafa2bd637ace0f24615bdad8e49f01 ]

D1 has a TCON TOP, so its quirks are similar to those for the R40 TCONs.
While there are some register changes, the part of the TCON TV supported
by the driver matches the R40 quirks, so that quirks structure can be
reused. D1 has the first supported TCON LCD with a TCON TOP, so the TCON
LCD needs a new quirks structure.

D1's TCON LCD hardware supports LVDS; in fact it provides dual-link LVDS
from a single TCON. However, it comes with a brand new LVDS PHY. Since
this PHY has not been tested, leave out LVDS driver support for now.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-14-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 9f06dec0fc61..e27103f5a075 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -1544,6 +1544,12 @@ static const struct sun4i_tcon_quirks sun9i_a80_tcon_tv_quirks = {
 	.needs_edp_reset = true,
 };
 
+static const struct sun4i_tcon_quirks sun20i_d1_lcd_quirks = {
+	.has_channel_0		= true,
+	.dclk_min_div		= 1,
+	.set_mux		= sun8i_r40_tcon_tv_set_mux,
+};
+
 /* sun4i_drv uses this list to check if a device node is a TCON */
 const struct of_device_id sun4i_tcon_of_table[] = {
 	{ .compatible = "allwinner,sun4i-a10-tcon", .data = &sun4i_a10_quirks },
@@ -1561,6 +1567,8 @@ const struct of_device_id sun4i_tcon_of_table[] = {
 	{ .compatible = "allwinner,sun8i-v3s-tcon", .data = &sun8i_v3s_quirks },
 	{ .compatible = "allwinner,sun9i-a80-tcon-lcd", .data = &sun9i_a80_tcon_lcd_quirks },
 	{ .compatible = "allwinner,sun9i-a80-tcon-tv", .data = &sun9i_a80_tcon_tv_quirks },
+	{ .compatible = "allwinner,sun20i-d1-tcon-lcd", .data = &sun20i_d1_lcd_quirks },
+	{ .compatible = "allwinner,sun20i-d1-tcon-tv", .data = &sun8i_r40_tv_quirks },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table);
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 039/109] scsi: megaraid: Fix error check return value of register_chrdev()

[Sasha Levin]

From: Lv Ruyi <lv.ruyi@zte.com.cn>

[ Upstream commit c5acd61dbb32b6bda0f3a354108f2b8dcb788985 ]

If major equals 0, register_chrdev() returns an error code when it fails.
This function dynamically allocates a major and returns its number on
success, so we should use "< 0" to check it instead of "!".

Link: https://lore.kernel.org/r/20220418105755.2558828-1-lv.ruyi@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 56910e94dbf2..7dd6dd74d2bc 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -4628,7 +4628,7 @@ static int __init megaraid_init(void)
 	 * major number allocation.
 	 */
 	major = register_chrdev(0, "megadev_legacy", &megadev_fops);
-	if (!major) {
+	if (major < 0) {
 		printk(KERN_WARNING
 				"megaraid: failed to register char device\n");
 	}
-- 
2.35.1

[PATCH AUTOSEL 5.15 040/109] drm/amdgpu/sdma: Fix incorrect calculations of the wptr of the doorbells

[Sasha Levin]

From: Haohui Mai <ricetons@gmail.com>

[ Upstream commit 7dba6e838e741caadcf27ef717b6dcb561e77f89 ]

This patch fixes the issue where the driver miscomputes the 64-bit
values of the wptr of the SDMA doorbell when initializing the
hardware. SDMA engines v4 and later on have full 64-bit registers for
wptr thus they should be set properly.

Older generation hardwares like CIK / SI have only 16 / 20 / 24bits
for the WPTR, where the calls of lower_32_bits() will be removed in a
following patch.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Haohui Mai <ricetons@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 4 ++--
 drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c | 8 ++++----
 drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c | 8 ++++----
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
index e37948c15769..9014f71d52dd 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
@@ -770,8 +770,8 @@ static void sdma_v4_0_ring_set_wptr(struct amdgpu_ring *ring)
 
 		DRM_DEBUG("Using doorbell -- "
 				"wptr_offs == 0x%08x "
-				"lower_32_bits(ring->wptr) << 2 == 0x%08x "
-				"upper_32_bits(ring->wptr) << 2 == 0x%08x\n",
+				"lower_32_bits(ring->wptr << 2) == 0x%08x "
+				"upper_32_bits(ring->wptr << 2) == 0x%08x\n",
 				ring->wptr_offs,
 				lower_32_bits(ring->wptr << 2),
 				upper_32_bits(ring->wptr << 2));
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
index 50bf3b71bc93..0f75864365d6 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
@@ -400,8 +400,8 @@ static void sdma_v5_0_ring_set_wptr(struct amdgpu_ring *ring)
 	if (ring->use_doorbell) {
 		DRM_DEBUG("Using doorbell -- "
 				"wptr_offs == 0x%08x "
-				"lower_32_bits(ring->wptr) << 2 == 0x%08x "
-				"upper_32_bits(ring->wptr) << 2 == 0x%08x\n",
+				"lower_32_bits(ring->wptr << 2) == 0x%08x "
+				"upper_32_bits(ring->wptr << 2) == 0x%08x\n",
 				ring->wptr_offs,
 				lower_32_bits(ring->wptr << 2),
 				upper_32_bits(ring->wptr << 2));
@@ -782,9 +782,9 @@ static int sdma_v5_0_gfx_resume(struct amdgpu_device *adev)
 
 		if (!amdgpu_sriov_vf(adev)) { /* only bare-metal use register write for wptr */
 			WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_GFX_RB_WPTR),
-			       lower_32_bits(ring->wptr) << 2);
+			       lower_32_bits(ring->wptr << 2));
 			WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_GFX_RB_WPTR_HI),
-			       upper_32_bits(ring->wptr) << 2);
+			       upper_32_bits(ring->wptr << 2));
 		}
 
 		doorbell = RREG32_SOC15_IP(GC, sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_GFX_DOORBELL));
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c
index e32efcfb0c8b..f643b977b5f4 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c
@@ -287,8 +287,8 @@ static void sdma_v5_2_ring_set_wptr(struct amdgpu_ring *ring)
 	if (ring->use_doorbell) {
 		DRM_DEBUG("Using doorbell -- "
 				"wptr_offs == 0x%08x "
-				"lower_32_bits(ring->wptr) << 2 == 0x%08x "
-				"upper_32_bits(ring->wptr) << 2 == 0x%08x\n",
+				"lower_32_bits(ring->wptr << 2) == 0x%08x "
+				"upper_32_bits(ring->wptr << 2) == 0x%08x\n",
 				ring->wptr_offs,
 				lower_32_bits(ring->wptr << 2),
 				upper_32_bits(ring->wptr << 2));
@@ -660,8 +660,8 @@ static int sdma_v5_2_gfx_resume(struct amdgpu_device *adev)
 		WREG32_SOC15_IP(GC, sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_GFX_MINOR_PTR_UPDATE), 1);
 
 		if (!amdgpu_sriov_vf(adev)) { /* only bare-metal use register write for wptr */
-			WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_GFX_RB_WPTR), lower_32_bits(ring->wptr) << 2);
-			WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_GFX_RB_WPTR_HI), upper_32_bits(ring->wptr) << 2);
+			WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_GFX_RB_WPTR), lower_32_bits(ring->wptr << 2));
+			WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_GFX_RB_WPTR_HI), upper_32_bits(ring->wptr << 2));
 		}
 
 		doorbell = RREG32_SOC15_IP(GC, sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_GFX_DOORBELL));
-- 
2.35.1

[PATCH AUTOSEL 5.15 041/109] scsi: ufs: Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()

[Sasha Levin]

From: Minghao Chi <chi.minghao@zte.com.cn>

[ Upstream commit 75b8715e20a20bc7b4844835e4035543a2674200 ]

Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync() and
pm_runtime_put_noidle(). This change is just to simplify the code, no
actual functional changes.

Link: https://lore.kernel.org/r/20220420090353.2588804-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ti-j721e-ufs.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ufs/ti-j721e-ufs.c b/drivers/scsi/ufs/ti-j721e-ufs.c
index eafe0db98d54..122d650d0810 100644
--- a/drivers/scsi/ufs/ti-j721e-ufs.c
+++ b/drivers/scsi/ufs/ti-j721e-ufs.c
@@ -29,11 +29,9 @@ static int ti_j721e_ufs_probe(struct platform_device *pdev)
 		return PTR_ERR(regbase);
 
 	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(dev);
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
 		goto disable_pm;
-	}
 
 	/* Select MPHY refclk frequency */
 	clk = devm_clk_get(dev, NULL);
-- 
2.35.1

[PATCH AUTOSEL 5.15 042/109] scsi: lpfc: Fix resource leak in lpfc_sli4_send_seq_to_ulp()

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 646db1a560f44236b7278b822ca99a1d3b6ea72c ]

If no handler is found in lpfc_complete_unsol_iocb() to match the rctl of a
received frame, the frame is dropped and resources are leaked.

Fix by returning resources when discarding an unhandled frame type.  Update
lpfc_fc_frame_check() handling of NOP basic link service.

Link: https://lore.kernel.org/r/20220426181419.9154-1-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_sli.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 68d8e55c1205..d8d26cde70b6 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -18455,7 +18455,6 @@ lpfc_fc_frame_check(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr)
 	case FC_RCTL_ELS_REP:	/* extended link services reply */
 	case FC_RCTL_ELS4_REQ:	/* FC-4 ELS request */
 	case FC_RCTL_ELS4_REP:	/* FC-4 ELS reply */
-	case FC_RCTL_BA_NOP:  	/* basic link service NOP */
 	case FC_RCTL_BA_ABTS: 	/* basic link service abort */
 	case FC_RCTL_BA_RMC: 	/* remove connection */
 	case FC_RCTL_BA_ACC:	/* basic accept */
@@ -18476,6 +18475,7 @@ lpfc_fc_frame_check(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr)
 		fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
 		fc_hdr = &((struct fc_frame_header *)fc_vft_hdr)[1];
 		return lpfc_fc_frame_check(phba, fc_hdr);
+	case FC_RCTL_BA_NOP:	/* basic link service NOP */
 	default:
 		goto drop;
 	}
@@ -19288,12 +19288,14 @@ lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *vport,
 	if (!lpfc_complete_unsol_iocb(phba,
 				      phba->sli4_hba.els_wq->pring,
 				      iocbq, fc_hdr->fh_r_ctl,
-				      fc_hdr->fh_type))
+				      fc_hdr->fh_type)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
 				"2540 Ring %d handler: unexpected Rctl "
 				"x%x Type x%x received\n",
 				LPFC_ELS_RING,
 				fc_hdr->fh_r_ctl, fc_hdr->fh_type);
+		lpfc_in_buf_free(phba, &seq_dmabuf->dbuf);
+	}
 
 	/* Free iocb created in lpfc_prep_seq */
 	list_for_each_entry_safe(curr_iocb, next_iocb,
-- 
2.35.1

[PATCH AUTOSEL 5.15 043/109] ath11k: disable spectral scan during spectral deinit

[Sasha Levin]

From: Hari Chandrakanthan <quic_haric@quicinc.com>

[ Upstream commit 161c64de239c7018e0295e7e0520a19f00aa32dc ]

When ath11k modules are removed using rmmod with spectral scan enabled,
crash is observed. Different crash trace is observed for each crash.

Send spectral scan disable WMI command to firmware before cleaning
the spectral dbring in the spectral_deinit API to avoid this crash.

call trace from one of the crash observed:
[ 1252.880802] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[ 1252.882722] pgd = 0f42e886
[ 1252.890955] [00000008] *pgd=00000000
[ 1252.893478] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 1253.093035] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.89 #0
[ 1253.115261] Hardware name: Generic DT based system
[ 1253.121149] PC is at ath11k_spectral_process_data+0x434/0x574 [ath11k]
[ 1253.125940] LR is at 0x88e31017
[ 1253.132448] pc : [<7f9387b8>]    lr : [<88e31017>]    psr: a0000193
[ 1253.135488] sp : 80d01bc8  ip : 00000001  fp : 970e0000
[ 1253.141737] r10: 88e31000  r9 : 970ec000  r8 : 00000080
[ 1253.146946] r7 : 94734040  r6 : a0000113  r5 : 00000057  r4 : 00000000
[ 1253.152159] r3 : e18cb694  r2 : 00000217  r1 : 1df1f000  r0 : 00000001
[ 1253.158755] Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[ 1253.165266] Control: 10c0383d  Table: 5e71006a  DAC: 00000055
[ 1253.172472] Process swapper/0 (pid: 0, stack limit = 0x60870141)
[ 1253.458055] [<7f9387b8>] (ath11k_spectral_process_data [ath11k]) from [<7f917fdc>] (ath11k_dbring_buffer_release_event+0x214/0x2e4 [ath11k])
[ 1253.466139] [<7f917fdc>] (ath11k_dbring_buffer_release_event [ath11k]) from [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx+0x1840/0x29cc [ath11k])
[ 1253.478807] [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx [ath11k]) from [<7f8fe868>] (ath11k_htc_rx_completion_handler+0x180/0x4e0 [ath11k])
[ 1253.490699] [<7f8fe868>] (ath11k_htc_rx_completion_handler [ath11k]) from [<7f91308c>] (ath11k_ce_per_engine_service+0x2c4/0x3b4 [ath11k])
[ 1253.502386] [<7f91308c>] (ath11k_ce_per_engine_service [ath11k]) from [<7f9a4198>] (ath11k_pci_ce_tasklet+0x28/0x80 [ath11k_pci])
[ 1253.514811] [<7f9a4198>] (ath11k_pci_ce_tasklet [ath11k_pci]) from [<8032227c>] (tasklet_action_common.constprop.2+0x64/0xe8)
[ 1253.526476] [<8032227c>] (tasklet_action_common.constprop.2) from [<803021e8>] (__do_softirq+0x130/0x2d0)
[ 1253.537756] [<803021e8>] (__do_softirq) from [<80322610>] (irq_exit+0xcc/0xe8)
[ 1253.547304] [<80322610>] (irq_exit) from [<8036a4a4>] (__handle_domain_irq+0x60/0xb4)
[ 1253.554428] [<8036a4a4>] (__handle_domain_irq) from [<805eb348>] (gic_handle_irq+0x4c/0x90)
[ 1253.562321] [<805eb348>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c)

Tested-on: QCN6122 hw1.0 AHB WLAN.HK.2.6.0.1-00851-QCAHKSWPL_SILICONZ-1

Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1649396345-349-1-git-send-email-quic_haric@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/spectral.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/spectral.c b/drivers/net/wireless/ath/ath11k/spectral.c
index 1afe67759659..e5af9358e610 100644
--- a/drivers/net/wireless/ath/ath11k/spectral.c
+++ b/drivers/net/wireless/ath/ath11k/spectral.c
@@ -214,7 +214,10 @@ static int ath11k_spectral_scan_config(struct ath11k *ar,
 		return -ENODEV;
 
 	arvif->spectral_enabled = (mode != ATH11K_SPECTRAL_DISABLED);
+
+	spin_lock_bh(&ar->spectral.lock);
 	ar->spectral.mode = mode;
+	spin_unlock_bh(&ar->spectral.lock);
 
 	ret = ath11k_wmi_vdev_spectral_enable(ar, arvif->vdev_id,
 					      ATH11K_WMI_SPECTRAL_TRIGGER_CMD_CLEAR,
@@ -829,9 +832,6 @@ static inline void ath11k_spectral_ring_free(struct ath11k *ar)
 {
 	struct ath11k_spectral *sp = &ar->spectral;
 
-	if (!sp->enabled)
-		return;
-
 	ath11k_dbring_srng_cleanup(ar, &sp->rx_ring);
 	ath11k_dbring_buf_cleanup(ar, &sp->rx_ring);
 }
@@ -883,15 +883,16 @@ void ath11k_spectral_deinit(struct ath11k_base *ab)
 		if (!sp->enabled)
 			continue;
 
-		ath11k_spectral_debug_unregister(ar);
-		ath11k_spectral_ring_free(ar);
+		mutex_lock(&ar->conf_mutex);
+		ath11k_spectral_scan_config(ar, ATH11K_SPECTRAL_DISABLED);
+		mutex_unlock(&ar->conf_mutex);
 
 		spin_lock_bh(&sp->lock);
-
-		sp->mode = ATH11K_SPECTRAL_DISABLED;
 		sp->enabled = false;
-
 		spin_unlock_bh(&sp->lock);
+
+		ath11k_spectral_debug_unregister(ar);
+		ath11k_spectral_ring_free(ar);
 	}
 }
 
-- 
2.35.1


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

[PATCH AUTOSEL 5.15 043/109] ath11k: disable spectral scan during spectral deinit

[Sasha Levin]

From: Hari Chandrakanthan <quic_haric@quicinc.com>

[ Upstream commit 161c64de239c7018e0295e7e0520a19f00aa32dc ]

When ath11k modules are removed using rmmod with spectral scan enabled,
crash is observed. Different crash trace is observed for each crash.

Send spectral scan disable WMI command to firmware before cleaning
the spectral dbring in the spectral_deinit API to avoid this crash.

call trace from one of the crash observed:
[ 1252.880802] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[ 1252.882722] pgd = 0f42e886
[ 1252.890955] [00000008] *pgd=00000000
[ 1252.893478] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 1253.093035] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.89 #0
[ 1253.115261] Hardware name: Generic DT based system
[ 1253.121149] PC is at ath11k_spectral_process_data+0x434/0x574 [ath11k]
[ 1253.125940] LR is at 0x88e31017
[ 1253.132448] pc : [<7f9387b8>]    lr : [<88e31017>]    psr: a0000193
[ 1253.135488] sp : 80d01bc8  ip : 00000001  fp : 970e0000
[ 1253.141737] r10: 88e31000  r9 : 970ec000  r8 : 00000080
[ 1253.146946] r7 : 94734040  r6 : a0000113  r5 : 00000057  r4 : 00000000
[ 1253.152159] r3 : e18cb694  r2 : 00000217  r1 : 1df1f000  r0 : 00000001
[ 1253.158755] Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[ 1253.165266] Control: 10c0383d  Table: 5e71006a  DAC: 00000055
[ 1253.172472] Process swapper/0 (pid: 0, stack limit = 0x60870141)
[ 1253.458055] [<7f9387b8>] (ath11k_spectral_process_data [ath11k]) from [<7f917fdc>] (ath11k_dbring_buffer_release_event+0x214/0x2e4 [ath11k])
[ 1253.466139] [<7f917fdc>] (ath11k_dbring_buffer_release_event [ath11k]) from [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx+0x1840/0x29cc [ath11k])
[ 1253.478807] [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx [ath11k]) from [<7f8fe868>] (ath11k_htc_rx_completion_handler+0x180/0x4e0 [ath11k])
[ 1253.490699] [<7f8fe868>] (ath11k_htc_rx_completion_handler [ath11k]) from [<7f91308c>] (ath11k_ce_per_engine_service+0x2c4/0x3b4 [ath11k])
[ 1253.502386] [<7f91308c>] (ath11k_ce_per_engine_service [ath11k]) from [<7f9a4198>] (ath11k_pci_ce_tasklet+0x28/0x80 [ath11k_pci])
[ 1253.514811] [<7f9a4198>] (ath11k_pci_ce_tasklet [ath11k_pci]) from [<8032227c>] (tasklet_action_common.constprop.2+0x64/0xe8)
[ 1253.526476] [<8032227c>] (tasklet_action_common.constprop.2) from [<803021e8>] (__do_softirq+0x130/0x2d0)
[ 1253.537756] [<803021e8>] (__do_softirq) from [<80322610>] (irq_exit+0xcc/0xe8)
[ 1253.547304] [<80322610>] (irq_exit) from [<8036a4a4>] (__handle_domain_irq+0x60/0xb4)
[ 1253.554428] [<8036a4a4>] (__handle_domain_irq) from [<805eb348>] (gic_handle_irq+0x4c/0x90)
[ 1253.562321] [<805eb348>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c)

Tested-on: QCN6122 hw1.0 AHB WLAN.HK.2.6.0.1-00851-QCAHKSWPL_SILICONZ-1

Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1649396345-349-1-git-send-email-quic_haric@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/spectral.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/spectral.c b/drivers/net/wireless/ath/ath11k/spectral.c
index 1afe67759659..e5af9358e610 100644
--- a/drivers/net/wireless/ath/ath11k/spectral.c
+++ b/drivers/net/wireless/ath/ath11k/spectral.c
@@ -214,7 +214,10 @@ static int ath11k_spectral_scan_config(struct ath11k *ar,
 		return -ENODEV;
 
 	arvif->spectral_enabled = (mode != ATH11K_SPECTRAL_DISABLED);
+
+	spin_lock_bh(&ar->spectral.lock);
 	ar->spectral.mode = mode;
+	spin_unlock_bh(&ar->spectral.lock);
 
 	ret = ath11k_wmi_vdev_spectral_enable(ar, arvif->vdev_id,
 					      ATH11K_WMI_SPECTRAL_TRIGGER_CMD_CLEAR,
@@ -829,9 +832,6 @@ static inline void ath11k_spectral_ring_free(struct ath11k *ar)
 {
 	struct ath11k_spectral *sp = &ar->spectral;
 
-	if (!sp->enabled)
-		return;
-
 	ath11k_dbring_srng_cleanup(ar, &sp->rx_ring);
 	ath11k_dbring_buf_cleanup(ar, &sp->rx_ring);
 }
@@ -883,15 +883,16 @@ void ath11k_spectral_deinit(struct ath11k_base *ab)
 		if (!sp->enabled)
 			continue;
 
-		ath11k_spectral_debug_unregister(ar);
-		ath11k_spectral_ring_free(ar);
+		mutex_lock(&ar->conf_mutex);
+		ath11k_spectral_scan_config(ar, ATH11K_SPECTRAL_DISABLED);
+		mutex_unlock(&ar->conf_mutex);
 
 		spin_lock_bh(&sp->lock);
-
-		sp->mode = ATH11K_SPECTRAL_DISABLED;
 		sp->enabled = false;
-
 		spin_unlock_bh(&sp->lock);
+
+		ath11k_spectral_debug_unregister(ar);
+		ath11k_spectral_ring_free(ar);
 	}
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 044/109] arm64/sme: Add ID_AA64SMFR0_EL1 to __read_sysreg_by_encoding()

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 8a58bcd00e2e8d46afce468adc09fcd7968f514c ]

We need to explicitly enumerate all the ID registers which we rely on
for CPU capabilities in __read_sysreg_by_encoding(), ID_AA64SMFR0_EL1 was
missed from this list so we trip a BUG() in paths which rely on that
function such as CPU hotplug. Add the register.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220427130828.162615-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/cpufeature.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index e71c9cfb46e8..ca417167675a 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -1281,6 +1281,7 @@ u64 __read_sysreg_by_encoding(u32 sys_id)
 	read_sysreg_case(SYS_ID_AA64PFR0_EL1);
 	read_sysreg_case(SYS_ID_AA64PFR1_EL1);
 	read_sysreg_case(SYS_ID_AA64ZFR0_EL1);
+	read_sysreg_case(SYS_ID_AA64SMFR0_EL1);
 	read_sysreg_case(SYS_ID_AA64DFR0_EL1);
 	read_sysreg_case(SYS_ID_AA64DFR1_EL1);
 	read_sysreg_case(SYS_ID_AA64MMFR0_EL1);
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 044/109] arm64/sme: Add ID_AA64SMFR0_EL1 to __read_sysreg_by_encoding()

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 8a58bcd00e2e8d46afce468adc09fcd7968f514c ]

We need to explicitly enumerate all the ID registers which we rely on
for CPU capabilities in __read_sysreg_by_encoding(), ID_AA64SMFR0_EL1 was
missed from this list so we trip a BUG() in paths which rely on that
function such as CPU hotplug. Add the register.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220427130828.162615-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/cpufeature.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index e71c9cfb46e8..ca417167675a 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -1281,6 +1281,7 @@ u64 __read_sysreg_by_encoding(u32 sys_id)
 	read_sysreg_case(SYS_ID_AA64PFR0_EL1);
 	read_sysreg_case(SYS_ID_AA64PFR1_EL1);
 	read_sysreg_case(SYS_ID_AA64ZFR0_EL1);
+	read_sysreg_case(SYS_ID_AA64SMFR0_EL1);
 	read_sysreg_case(SYS_ID_AA64DFR0_EL1);
 	read_sysreg_case(SYS_ID_AA64DFR1_EL1);
 	read_sysreg_case(SYS_ID_AA64MMFR0_EL1);
-- 
2.35.1

[PATCH AUTOSEL 5.15 045/109] ASoC: Intel: bytcr_rt5640: Add quirk for the HP Pro Tablet 408

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit ce216cfa84a4e1c23b105e652c550bdeaac9e922 ]

Add a quirk for the HP Pro Tablet 408, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.

It also uses DMIC1 for the internal mic rather then the default IN3
and it uses JD2 rather then the default JD1 for jack-detect.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211485
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220427134918.527381-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index a6e837290c7d..f9c82ebc552c 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -759,6 +759,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_OVCD_SF_0P75 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* HP Pro Tablet 408 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pro Tablet 408"),
+		},
+		.driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_1500UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* HP Stream 7 */
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-- 
2.35.1

[PATCH AUTOSEL 5.15 045/109] ASoC: Intel: bytcr_rt5640: Add quirk for the HP Pro Tablet 408

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit ce216cfa84a4e1c23b105e652c550bdeaac9e922 ]

Add a quirk for the HP Pro Tablet 408, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.

It also uses DMIC1 for the internal mic rather then the default IN3
and it uses JD2 rather then the default JD1 for jack-detect.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211485
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220427134918.527381-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index a6e837290c7d..f9c82ebc552c 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -759,6 +759,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_OVCD_SF_0P75 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* HP Pro Tablet 408 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pro Tablet 408"),
+		},
+		.driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_1500UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* HP Stream 7 */
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-- 
2.35.1

[PATCH AUTOSEL 5.15 046/109] drm/plane: Move range check for format_count earlier

[Sasha Levin]

From: Steven Price <steven.price@arm.com>

[ Upstream commit 4b674dd69701c2e22e8e7770c1706a69f3b17269 ]

While the check for format_count > 64 in __drm_universal_plane_init()
shouldn't be hit (it's a WARN_ON), in its current position it will then
leak the plane->format_types array and fail to call
drm_mode_object_unregister() leaking the modeset identifier. Move it to
the start of the function to avoid allocating those resources in the
first place.

Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211203102815.38624-1-steven.price@arm.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_plane.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
index 82afb854141b..fd0bf90fb4c2 100644
--- a/drivers/gpu/drm/drm_plane.c
+++ b/drivers/gpu/drm/drm_plane.c
@@ -249,6 +249,13 @@ static int __drm_universal_plane_init(struct drm_device *dev,
 	if (WARN_ON(config->num_total_plane >= 32))
 		return -EINVAL;
 
+	/*
+	 * First driver to need more than 64 formats needs to fix this. Each
+	 * format is encoded as a bit and the current code only supports a u64.
+	 */
+	if (WARN_ON(format_count > 64))
+		return -EINVAL;
+
 	WARN_ON(drm_drv_uses_atomic_modeset(dev) &&
 		(!funcs->atomic_destroy_state ||
 		 !funcs->atomic_duplicate_state));
@@ -270,13 +277,6 @@ static int __drm_universal_plane_init(struct drm_device *dev,
 		return -ENOMEM;
 	}
 
-	/*
-	 * First driver to need more than 64 formats needs to fix this. Each
-	 * format is encoded as a bit and the current code only supports a u64.
-	 */
-	if (WARN_ON(format_count > 64))
-		return -EINVAL;
-
 	if (format_modifiers) {
 		const uint64_t *temp_modifiers = format_modifiers;
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 047/109] drm/amd/pm: fix the compile warning

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 555238d92ac32dbad2d77ad2bafc48d17391990c ]

Fix the compile warning below:
drivers/gpu/drm/amd/amdgpu/../pm/legacy-dpm/kv_dpm.c:1641
kv_get_acp_boot_level() warn: always true condition '(table->entries[i]->clk >= 0) => (0-u32max >= 0)'

Reported-by: kernel test robot <lkp@intel.com>
CC: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c b/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c
index bcae42cef374..6ba4c2ae69a6 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c
@@ -1609,19 +1609,7 @@ static int kv_update_samu_dpm(struct amdgpu_device *adev, bool gate)
 
 static u8 kv_get_acp_boot_level(struct amdgpu_device *adev)
 {
-	u8 i;
-	struct amdgpu_clock_voltage_dependency_table *table =
-		&adev->pm.dpm.dyn_state.acp_clock_voltage_dependency_table;
-
-	for (i = 0; i < table->count; i++) {
-		if (table->entries[i].clk >= 0) /* XXX */
-			break;
-	}
-
-	if (i >= table->count)
-		i = table->count - 1;
-
-	return i;
+	return 0;
 }
 
 static void kv_update_acp_boot_level(struct amdgpu_device *adev)
-- 
2.35.1

[PATCH AUTOSEL 5.15 047/109] drm/amd/pm: fix the compile warning

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 555238d92ac32dbad2d77ad2bafc48d17391990c ]

Fix the compile warning below:
drivers/gpu/drm/amd/amdgpu/../pm/legacy-dpm/kv_dpm.c:1641
kv_get_acp_boot_level() warn: always true condition '(table->entries[i]->clk >= 0) => (0-u32max >= 0)'

Reported-by: kernel test robot <lkp@intel.com>
CC: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c b/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c
index bcae42cef374..6ba4c2ae69a6 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c
@@ -1609,19 +1609,7 @@ static int kv_update_samu_dpm(struct amdgpu_device *adev, bool gate)
 
 static u8 kv_get_acp_boot_level(struct amdgpu_device *adev)
 {
-	u8 i;
-	struct amdgpu_clock_voltage_dependency_table *table =
-		&adev->pm.dpm.dyn_state.acp_clock_voltage_dependency_table;
-
-	for (i = 0; i < table->count; i++) {
-		if (table->entries[i].clk >= 0) /* XXX */
-			break;
-	}
-
-	if (i >= table->count)
-		i = table->count - 1;
-
-	return i;
+	return 0;
 }
 
 static void kv_update_acp_boot_level(struct amdgpu_device *adev)
-- 
2.35.1

[PATCH AUTOSEL 5.15 047/109] drm/amd/pm: fix the compile warning

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 555238d92ac32dbad2d77ad2bafc48d17391990c ]

Fix the compile warning below:
drivers/gpu/drm/amd/amdgpu/../pm/legacy-dpm/kv_dpm.c:1641
kv_get_acp_boot_level() warn: always true condition '(table->entries[i]->clk >= 0) => (0-u32max >= 0)'

Reported-by: kernel test robot <lkp@intel.com>
CC: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c b/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c
index bcae42cef374..6ba4c2ae69a6 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c
@@ -1609,19 +1609,7 @@ static int kv_update_samu_dpm(struct amdgpu_device *adev, bool gate)
 
 static u8 kv_get_acp_boot_level(struct amdgpu_device *adev)
 {
-	u8 i;
-	struct amdgpu_clock_voltage_dependency_table *table =
-		&adev->pm.dpm.dyn_state.acp_clock_voltage_dependency_table;
-
-	for (i = 0; i < table->count; i++) {
-		if (table->entries[i].clk >= 0) /* XXX */
-			break;
-	}
-
-	if (i >= table->count)
-		i = table->count - 1;
-
-	return i;
+	return 0;
 }
 
 static void kv_update_acp_boot_level(struct amdgpu_device *adev)
-- 
2.35.1

[PATCH AUTOSEL 5.15 048/109] ath10k: skip ath10k_halt during suspend for driver state RESTARTING

[Sasha Levin]

From: Abhishek Kumar <kuabhs@chromium.org>

[ Upstream commit b72a4aff947ba807177bdabb43debaf2c66bee05 ]

Double free crash is observed when FW recovery(caused by wmi
timeout/crash) is followed by immediate suspend event. The FW recovery
is triggered by ath10k_core_restart() which calls driver clean up via
ath10k_halt(). When the suspend event occurs between the FW recovery,
the restart worker thread is put into frozen state until suspend completes.
The suspend event triggers ath10k_stop() which again triggers ath10k_halt()
The double invocation of ath10k_halt() causes ath10k_htt_rx_free() to be
called twice(Note: ath10k_htt_rx_alloc was not called by restart worker
thread because of its frozen state), causing the crash.

To fix this, during the suspend flow, skip call to ath10k_halt() in
ath10k_stop() when the current driver state is ATH10K_STATE_RESTARTING.
Also, for driver state ATH10K_STATE_RESTARTING, call
ath10k_wait_for_suspend() in ath10k_stop(). This is because call to
ath10k_wait_for_suspend() is skipped later in
[ath10k_halt() > ath10k_core_stop()] for the driver state
ATH10K_STATE_RESTARTING.

The frozen restart worker thread will be cancelled during resume when the
device comes out of suspend.

Below is the crash stack for reference:

[  428.469167] ------------[ cut here ]------------
[  428.469180] kernel BUG at mm/slub.c:4150!
[  428.469193] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[  428.469219] Workqueue: events_unbound async_run_entry_fn
[  428.469230] RIP: 0010:kfree+0x319/0x31b
[  428.469241] RSP: 0018:ffffa1fac015fc30 EFLAGS: 00010246
[  428.469247] RAX: ffffedb10419d108 RBX: ffff8c05262b0000
[  428.469252] RDX: ffff8c04a8c07000 RSI: 0000000000000000
[  428.469256] RBP: ffffa1fac015fc78 R08: 0000000000000000
[  428.469276] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  428.469285] Call Trace:
[  428.469295]  ? dma_free_attrs+0x5f/0x7d
[  428.469320]  ath10k_core_stop+0x5b/0x6f
[  428.469336]  ath10k_halt+0x126/0x177
[  428.469352]  ath10k_stop+0x41/0x7e
[  428.469387]  drv_stop+0x88/0x10e
[  428.469410]  __ieee80211_suspend+0x297/0x411
[  428.469441]  rdev_suspend+0x6e/0xd0
[  428.469462]  wiphy_suspend+0xb1/0x105
[  428.469483]  ? name_show+0x2d/0x2d
[  428.469490]  dpm_run_callback+0x8c/0x126
[  428.469511]  ? name_show+0x2d/0x2d
[  428.469517]  __device_suspend+0x2e7/0x41b
[  428.469523]  async_suspend+0x1f/0x93
[  428.469529]  async_run_entry_fn+0x3d/0xd1
[  428.469535]  process_one_work+0x1b1/0x329
[  428.469541]  worker_thread+0x213/0x372
[  428.469547]  kthread+0x150/0x15f
[  428.469552]  ? pr_cont_work+0x58/0x58
[  428.469558]  ? kthread_blkcg+0x31/0x31

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1
Co-developed-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Abhishek Kumar <kuabhs@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220426221859.v2.1.I650b809482e1af8d0156ed88b5dc2677a0711d46@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1f73fbfee0c0..8a80919b627f 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5339,13 +5339,29 @@ static int ath10k_start(struct ieee80211_hw *hw)
 static void ath10k_stop(struct ieee80211_hw *hw)
 {
 	struct ath10k *ar = hw->priv;
+	u32 opt;
 
 	ath10k_drain_tx(ar);
 
 	mutex_lock(&ar->conf_mutex);
 	if (ar->state != ATH10K_STATE_OFF) {
-		if (!ar->hw_rfkill_on)
-			ath10k_halt(ar);
+		if (!ar->hw_rfkill_on) {
+			/* If the current driver state is RESTARTING but not yet
+			 * fully RESTARTED because of incoming suspend event,
+			 * then ath10k_halt() is already called via
+			 * ath10k_core_restart() and should not be called here.
+			 */
+			if (ar->state != ATH10K_STATE_RESTARTING) {
+				ath10k_halt(ar);
+			} else {
+				/* Suspending here, because when in RESTARTING
+				 * state, ath10k_core_stop() skips
+				 * ath10k_wait_for_suspend().
+				 */
+				opt = WMI_PDEV_SUSPEND_AND_DISABLE_INTR;
+				ath10k_wait_for_suspend(ar, opt);
+			}
+		}
 		ar->state = ATH10K_STATE_OFF;
 	}
 	mutex_unlock(&ar->conf_mutex);
-- 
2.35.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.15 048/109] ath10k: skip ath10k_halt during suspend for driver state RESTARTING

[Sasha Levin]

From: Abhishek Kumar <kuabhs@chromium.org>

[ Upstream commit b72a4aff947ba807177bdabb43debaf2c66bee05 ]

Double free crash is observed when FW recovery(caused by wmi
timeout/crash) is followed by immediate suspend event. The FW recovery
is triggered by ath10k_core_restart() which calls driver clean up via
ath10k_halt(). When the suspend event occurs between the FW recovery,
the restart worker thread is put into frozen state until suspend completes.
The suspend event triggers ath10k_stop() which again triggers ath10k_halt()
The double invocation of ath10k_halt() causes ath10k_htt_rx_free() to be
called twice(Note: ath10k_htt_rx_alloc was not called by restart worker
thread because of its frozen state), causing the crash.

To fix this, during the suspend flow, skip call to ath10k_halt() in
ath10k_stop() when the current driver state is ATH10K_STATE_RESTARTING.
Also, for driver state ATH10K_STATE_RESTARTING, call
ath10k_wait_for_suspend() in ath10k_stop(). This is because call to
ath10k_wait_for_suspend() is skipped later in
[ath10k_halt() > ath10k_core_stop()] for the driver state
ATH10K_STATE_RESTARTING.

The frozen restart worker thread will be cancelled during resume when the
device comes out of suspend.

Below is the crash stack for reference:

[  428.469167] ------------[ cut here ]------------
[  428.469180] kernel BUG at mm/slub.c:4150!
[  428.469193] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[  428.469219] Workqueue: events_unbound async_run_entry_fn
[  428.469230] RIP: 0010:kfree+0x319/0x31b
[  428.469241] RSP: 0018:ffffa1fac015fc30 EFLAGS: 00010246
[  428.469247] RAX: ffffedb10419d108 RBX: ffff8c05262b0000
[  428.469252] RDX: ffff8c04a8c07000 RSI: 0000000000000000
[  428.469256] RBP: ffffa1fac015fc78 R08: 0000000000000000
[  428.469276] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  428.469285] Call Trace:
[  428.469295]  ? dma_free_attrs+0x5f/0x7d
[  428.469320]  ath10k_core_stop+0x5b/0x6f
[  428.469336]  ath10k_halt+0x126/0x177
[  428.469352]  ath10k_stop+0x41/0x7e
[  428.469387]  drv_stop+0x88/0x10e
[  428.469410]  __ieee80211_suspend+0x297/0x411
[  428.469441]  rdev_suspend+0x6e/0xd0
[  428.469462]  wiphy_suspend+0xb1/0x105
[  428.469483]  ? name_show+0x2d/0x2d
[  428.469490]  dpm_run_callback+0x8c/0x126
[  428.469511]  ? name_show+0x2d/0x2d
[  428.469517]  __device_suspend+0x2e7/0x41b
[  428.469523]  async_suspend+0x1f/0x93
[  428.469529]  async_run_entry_fn+0x3d/0xd1
[  428.469535]  process_one_work+0x1b1/0x329
[  428.469541]  worker_thread+0x213/0x372
[  428.469547]  kthread+0x150/0x15f
[  428.469552]  ? pr_cont_work+0x58/0x58
[  428.469558]  ? kthread_blkcg+0x31/0x31

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1
Co-developed-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Abhishek Kumar <kuabhs@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220426221859.v2.1.I650b809482e1af8d0156ed88b5dc2677a0711d46@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1f73fbfee0c0..8a80919b627f 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5339,13 +5339,29 @@ static int ath10k_start(struct ieee80211_hw *hw)
 static void ath10k_stop(struct ieee80211_hw *hw)
 {
 	struct ath10k *ar = hw->priv;
+	u32 opt;
 
 	ath10k_drain_tx(ar);
 
 	mutex_lock(&ar->conf_mutex);
 	if (ar->state != ATH10K_STATE_OFF) {
-		if (!ar->hw_rfkill_on)
-			ath10k_halt(ar);
+		if (!ar->hw_rfkill_on) {
+			/* If the current driver state is RESTARTING but not yet
+			 * fully RESTARTED because of incoming suspend event,
+			 * then ath10k_halt() is already called via
+			 * ath10k_core_restart() and should not be called here.
+			 */
+			if (ar->state != ATH10K_STATE_RESTARTING) {
+				ath10k_halt(ar);
+			} else {
+				/* Suspending here, because when in RESTARTING
+				 * state, ath10k_core_stop() skips
+				 * ath10k_wait_for_suspend().
+				 */
+				opt = WMI_PDEV_SUSPEND_AND_DISABLE_INTR;
+				ath10k_wait_for_suspend(ar, opt);
+			}
+		}
 		ar->state = ATH10K_STATE_OFF;
 	}
 	mutex_unlock(&ar->conf_mutex);
-- 
2.35.1

[PATCH AUTOSEL 5.15 049/109] arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall

[Sasha Levin]

From: Alexandru Elisei <alexandru.elisei@arm.com>

[ Upstream commit 3fed9e551417b84038b15117732ea4505eee386b ]

If a compat process tries to execute an unknown system call above the
__ARM_NR_COMPAT_END number, the kernel sends a SIGILL signal to the
offending process. Information about the error is printed to dmesg in
compat_arm_syscall() -> arm64_notify_die() -> arm64_force_sig_fault() ->
arm64_show_signal().

arm64_show_signal() interprets a non-zero value for
current->thread.fault_code as an exception syndrome and displays the
message associated with the ESR_ELx.EC field (bits 31:26).
current->thread.fault_code is set in compat_arm_syscall() ->
arm64_notify_die() with the bad syscall number instead of a valid ESR_ELx
value. This means that the ESR_ELx.EC field has the value that the user set
for the syscall number and the kernel can end up printing bogus exception
messages*. For example, for the syscall number 0x68000000, which evaluates
to ESR_ELx.EC value of 0x1A (ESR_ELx_EC_FPAC) the kernel prints this error:

[   18.349161] syscall[300]: unhandled exception: ERET/ERETAA/ERETAB, ESR 0x68000000, Oops - bad compat syscall(2) in syscall[10000+50000]
[   18.350639] CPU: 2 PID: 300 Comm: syscall Not tainted 5.18.0-rc1 #79
[   18.351249] Hardware name: Pine64 RockPro64 v2.0 (DT)
[..]

which is misleading, as the bad compat syscall has nothing to do with
pointer authentication.

Stop arm64_show_signal() from printing exception syndrome information by
having compat_arm_syscall() set the ESR_ELx value to 0, as it has no
meaning for an invalid system call number. The example above now becomes:

[   19.935275] syscall[301]: unhandled exception: Oops - bad compat syscall(2) in syscall[10000+50000]
[   19.936124] CPU: 1 PID: 301 Comm: syscall Not tainted 5.18.0-rc1-00005-g7e08006d4102 #80
[   19.936894] Hardware name: Pine64 RockPro64 v2.0 (DT)
[..]

which although shows less information because the syscall number,
wrongfully advertised as the ESR value, is missing, it is better than
showing plainly wrong information. The syscall number can be easily
obtained with strace.

*A 32-bit value above or equal to 0x8000_0000 is interpreted as a negative
integer in compat_arm_syscal() and the condition scno < __ARM_NR_COMPAT_END
evaluates to true; the syscall will exit to userspace in this case with the
ENOSYS error code instead of arm64_notify_die() being called.

Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425114444.368693-3-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/sys_compat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c
index db5159a3055f..b88a52f7188f 100644
--- a/arch/arm64/kernel/sys_compat.c
+++ b/arch/arm64/kernel/sys_compat.c
@@ -114,6 +114,6 @@ long compat_arm_syscall(struct pt_regs *regs, int scno)
 	addr = instruction_pointer(regs) - (compat_thumb_mode(regs) ? 2 : 4);
 
 	arm64_notify_die("Oops - bad compat syscall(2)", regs,
-			 SIGILL, ILL_ILLTRP, addr, scno);
+			 SIGILL, ILL_ILLTRP, addr, 0);
 	return 0;
 }
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 049/109] arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall

[Sasha Levin]

From: Alexandru Elisei <alexandru.elisei@arm.com>

[ Upstream commit 3fed9e551417b84038b15117732ea4505eee386b ]

If a compat process tries to execute an unknown system call above the
__ARM_NR_COMPAT_END number, the kernel sends a SIGILL signal to the
offending process. Information about the error is printed to dmesg in
compat_arm_syscall() -> arm64_notify_die() -> arm64_force_sig_fault() ->
arm64_show_signal().

arm64_show_signal() interprets a non-zero value for
current->thread.fault_code as an exception syndrome and displays the
message associated with the ESR_ELx.EC field (bits 31:26).
current->thread.fault_code is set in compat_arm_syscall() ->
arm64_notify_die() with the bad syscall number instead of a valid ESR_ELx
value. This means that the ESR_ELx.EC field has the value that the user set
for the syscall number and the kernel can end up printing bogus exception
messages*. For example, for the syscall number 0x68000000, which evaluates
to ESR_ELx.EC value of 0x1A (ESR_ELx_EC_FPAC) the kernel prints this error:

[   18.349161] syscall[300]: unhandled exception: ERET/ERETAA/ERETAB, ESR 0x68000000, Oops - bad compat syscall(2) in syscall[10000+50000]
[   18.350639] CPU: 2 PID: 300 Comm: syscall Not tainted 5.18.0-rc1 #79
[   18.351249] Hardware name: Pine64 RockPro64 v2.0 (DT)
[..]

which is misleading, as the bad compat syscall has nothing to do with
pointer authentication.

Stop arm64_show_signal() from printing exception syndrome information by
having compat_arm_syscall() set the ESR_ELx value to 0, as it has no
meaning for an invalid system call number. The example above now becomes:

[   19.935275] syscall[301]: unhandled exception: Oops - bad compat syscall(2) in syscall[10000+50000]
[   19.936124] CPU: 1 PID: 301 Comm: syscall Not tainted 5.18.0-rc1-00005-g7e08006d4102 #80
[   19.936894] Hardware name: Pine64 RockPro64 v2.0 (DT)
[..]

which although shows less information because the syscall number,
wrongfully advertised as the ESR value, is missing, it is better than
showing plainly wrong information. The syscall number can be easily
obtained with strace.

*A 32-bit value above or equal to 0x8000_0000 is interpreted as a negative
integer in compat_arm_syscal() and the condition scno < __ARM_NR_COMPAT_END
evaluates to true; the syscall will exit to userspace in this case with the
ENOSYS error code instead of arm64_notify_die() being called.

Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425114444.368693-3-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/sys_compat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c
index db5159a3055f..b88a52f7188f 100644
--- a/arch/arm64/kernel/sys_compat.c
+++ b/arch/arm64/kernel/sys_compat.c
@@ -114,6 +114,6 @@ long compat_arm_syscall(struct pt_regs *regs, int scno)
 	addr = instruction_pointer(regs) - (compat_thumb_mode(regs) ? 2 : 4);
 
 	arm64_notify_die("Oops - bad compat syscall(2)", regs,
-			 SIGILL, ILL_ILLTRP, addr, scno);
+			 SIGILL, ILL_ILLTRP, addr, 0);
 	return 0;
 }
-- 
2.35.1

[PATCH AUTOSEL 5.15 050/109] drm: msm: fix error check return value of irq_of_parse_and_map()

[Sasha Levin]

From: Lv Ruyi <lv.ruyi@zte.com.cn>

[ Upstream commit b9e4f1d2b505df8e2439b63e67afaa287c1c43e2 ]

The irq_of_parse_and_map() function returns 0 on failure, and does not
return an negative value.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483175/
Link: https://lore.kernel.org/r/20220424031959.3172406-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
index b3b42672b2d4..a2b276ae9673 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
@@ -598,9 +598,9 @@ struct msm_kms *mdp5_kms_init(struct drm_device *dev)
 	}
 
 	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
-	if (irq < 0) {
-		ret = irq;
-		DRM_DEV_ERROR(&pdev->dev, "failed to get irq: %d\n", ret);
+	if (!irq) {
+		ret = -EINVAL;
+		DRM_DEV_ERROR(&pdev->dev, "failed to get irq\n");
 		goto fail;
 	}
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 050/109] drm: msm: fix error check return value of irq_of_parse_and_map()

[Sasha Levin]

From: Lv Ruyi <lv.ruyi@zte.com.cn>

[ Upstream commit b9e4f1d2b505df8e2439b63e67afaa287c1c43e2 ]

The irq_of_parse_and_map() function returns 0 on failure, and does not
return an negative value.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483175/
Link: https://lore.kernel.org/r/20220424031959.3172406-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
index b3b42672b2d4..a2b276ae9673 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
@@ -598,9 +598,9 @@ struct msm_kms *mdp5_kms_init(struct drm_device *dev)
 	}
 
 	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
-	if (irq < 0) {
-		ret = irq;
-		DRM_DEV_ERROR(&pdev->dev, "failed to get irq: %d\n", ret);
+	if (!irq) {
+		ret = -EINVAL;
+		DRM_DEV_ERROR(&pdev->dev, "failed to get irq\n");
 		goto fail;
 	}
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 051/109] scsi: target: tcmu: Fix possible data corruption

[Sasha Levin]

From: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

[ Upstream commit bb9b9eb0ae2e9d3f6036f0ad907c3a83dcd43485 ]

When tcmu_vma_fault() gets a page successfully, before the current context
completes page fault procedure, find_free_blocks() may run and call
unmap_mapping_range() to unmap the page. Assume that when
find_free_blocks() initially completes and the previous page fault
procedure starts to run again and completes, then one truncated page has
been mapped to userspace. But note that tcmu_vma_fault() has gotten a
refcount for the page so any other subsystem won't be able to use the page
unless the userspace address is unmapped later.

If another command subsequently runs and needs to extend dbi_thresh it may
reuse the corresponding slot for the previous page in data_bitmap. Then
though we'll allocate new page for this slot in data_area, no page fault
will happen because we have a valid map and the real request's data will be
lost.

Filesystem implementations will also run into this issue but they usually
lock the page when vm_operations_struct->fault gets a page and unlock the
page after finish_fault() completes. For truncate filesystems lock pages in
truncate_inode_pages() to protect against racing wrt. page faults.

To fix this possible data corruption scenario we can apply a method similar
to the filesystems.  For pages that are to be freed, tcmu_blocks_release()
locks and unlocks. Make tcmu_vma_fault() also lock found page under
cmdr_lock. At the same time, since tcmu_vma_fault() gets an extra page
refcount, tcmu_blocks_release() won't free pages if pages are in page fault
procedure, which means it is safe to call tcmu_blocks_release() before
unmap_mapping_range().

With these changes tcmu_blocks_release() will wait for all page faults to
be completed before calling unmap_mapping_range(). And later, if
unmap_mapping_range() is called, it will ensure stale mappings are removed.

Link: https://lore.kernel.org/r/20220421023735.9018-1-xiaoguang.wang@linux.alibaba.com
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_user.c | 40 ++++++++++++++++++++++++++++---
 1 file changed, 37 insertions(+), 3 deletions(-)

diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c
index 0ca5ec14d3db..0173f44b015a 100644
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -20,6 +20,7 @@
 #include <linux/configfs.h>
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
+#include <linux/pagemap.h>
 #include <net/genetlink.h>
 #include <scsi/scsi_common.h>
 #include <scsi/scsi_proto.h>
@@ -1667,6 +1668,26 @@ static u32 tcmu_blocks_release(struct tcmu_dev *udev, unsigned long first,
 	xas_lock(&xas);
 	xas_for_each(&xas, page, (last + 1) * udev->data_pages_per_blk - 1) {
 		xas_store(&xas, NULL);
+		/*
+		 * While reaching here there may be page faults occurring on
+		 * the to-be-released pages. A race condition may occur if
+		 * unmap_mapping_range() is called before page faults on these
+		 * pages have completed; a valid but stale map is created.
+		 *
+		 * If another command subsequently runs and needs to extend
+		 * dbi_thresh, it may reuse the slot corresponding to the
+		 * previous page in data_bitmap. Though we will allocate a new
+		 * page for the slot in data_area, no page fault will happen
+		 * because we have a valid map. Therefore the command's data
+		 * will be lost.
+		 *
+		 * We lock and unlock pages that are to be released to ensure
+		 * all page faults have completed. This way
+		 * unmap_mapping_range() can ensure stale maps are cleanly
+		 * removed.
+		 */
+		lock_page(page);
+		unlock_page(page);
 		__free_page(page);
 		pages_freed++;
 	}
@@ -1822,6 +1843,7 @@ static struct page *tcmu_try_get_data_page(struct tcmu_dev *udev, uint32_t dpi)
 	page = xa_load(&udev->data_pages, dpi);
 	if (likely(page)) {
 		get_page(page);
+		lock_page(page);
 		mutex_unlock(&udev->cmdr_lock);
 		return page;
 	}
@@ -1863,6 +1885,7 @@ static vm_fault_t tcmu_vma_fault(struct vm_fault *vmf)
 	struct page *page;
 	unsigned long offset;
 	void *addr;
+	vm_fault_t ret = 0;
 
 	int mi = tcmu_find_mem_index(vmf->vma);
 	if (mi < 0)
@@ -1887,10 +1910,11 @@ static vm_fault_t tcmu_vma_fault(struct vm_fault *vmf)
 		page = tcmu_try_get_data_page(udev, dpi);
 		if (!page)
 			return VM_FAULT_SIGBUS;
+		ret = VM_FAULT_LOCKED;
 	}
 
 	vmf->page = page;
-	return 0;
+	return ret;
 }
 
 static const struct vm_operations_struct tcmu_vm_ops = {
@@ -3153,12 +3177,22 @@ static void find_free_blocks(void)
 			udev->dbi_max = block;
 		}
 
+		/*
+		 * Release the block pages.
+		 *
+		 * Also note that since tcmu_vma_fault() gets an extra page
+		 * refcount, tcmu_blocks_release() won't free pages if pages
+		 * are mapped. This means it is safe to call
+		 * tcmu_blocks_release() before unmap_mapping_range() which
+		 * drops the refcount of any pages it unmaps and thus releases
+		 * them.
+		 */
+		pages_freed = tcmu_blocks_release(udev, start, end - 1);
+
 		/* Here will truncate the data area from off */
 		off = udev->data_off + (loff_t)start * udev->data_blk_size;
 		unmap_mapping_range(udev->inode->i_mapping, off, 0, 1);
 
-		/* Release the block pages */
-		pages_freed = tcmu_blocks_release(udev, start, end - 1);
 		mutex_unlock(&udev->cmdr_lock);
 
 		total_pages_freed += pages_freed;
-- 
2.35.1

[PATCH AUTOSEL 5.15 052/109] ipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL

[Sasha Levin]

From: jianghaoran <jianghaoran@kylinos.cn>

[ Upstream commit b52e1cce31ca721e937d517411179f9196ee6135 ]

ARPHRD_TUNNEL interface can't process rs packets
and will generate TX errors

ex:
ip tunnel add ethn mode ipip local 192.168.1.1 remote 192.168.1.2
ifconfig ethn x.x.x.x

ethn: flags=209<UP,POINTOPOINT,RUNNING,NOARP>  mtu 1480
	inet x.x.x.x  netmask 255.255.255.255  destination x.x.x.x
	inet6 fe80::5efe:ac1e:3cdb  prefixlen 64  scopeid 0x20<link>
	tunnel   txqueuelen 1000  (IPIP Tunnel)
	RX packets 0  bytes 0 (0.0 B)
	RX errors 0  dropped 0  overruns 0  frame 0
	TX packets 0  bytes 0 (0.0 B)
	TX errors 3  dropped 0 overruns 0  carrier 0  collisions 0

Signed-off-by: jianghaoran <jianghaoran@kylinos.cn>
Link: https://lore.kernel.org/r/20220429053802.246681-1-jianghaoran@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/addrconf.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 1ba5ff21412c..07b868c002a3 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4219,7 +4219,8 @@ static void addrconf_dad_completed(struct inet6_ifaddr *ifp, bool bump_id,
 	send_rs = send_mld &&
 		  ipv6_accept_ra(ifp->idev) &&
 		  ifp->idev->cnf.rtr_solicits != 0 &&
-		  (dev->flags&IFF_LOOPBACK) == 0;
+		  (dev->flags & IFF_LOOPBACK) == 0 &&
+		  (dev->type != ARPHRD_TUNNEL);
 	read_unlock_bh(&ifp->idev->lock);
 
 	/* While dad is in progress mld report's source address is in6_addrany.
-- 
2.35.1

[PATCH AUTOSEL 5.15 053/109] net/mlx5: fs, delete the FTE when there are no rules attached to it

[Sasha Levin]

From: Mark Bloch <mbloch@nvidia.com>

[ Upstream commit 7b0c6338597613f465d131bd939a51844a00455a ]

When an FTE has no children is means all the rules where removed
and the FTE can be deleted regardless of the dests_size value.
While dests_size should be 0 when there are no children
be extra careful not to leak memory or get firmware syndrome
if the proper bookkeeping of dests_size wasn't done.

Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
index 00834c914dc6..a197dd7ca73b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -2031,16 +2031,16 @@ void mlx5_del_flow_rules(struct mlx5_flow_handle *handle)
 	down_write_ref_node(&fte->node, false);
 	for (i = handle->num_rules - 1; i >= 0; i--)
 		tree_remove_node(&handle->rule[i]->node, true);
-	if (fte->dests_size) {
-		if (fte->modify_mask)
-			modify_fte(fte);
-		up_write_ref_node(&fte->node, false);
-	} else if (list_empty(&fte->node.children)) {
+	if (list_empty(&fte->node.children)) {
 		del_hw_fte(&fte->node);
 		/* Avoid double call to del_hw_fte */
 		fte->node.del_hw_func = NULL;
 		up_write_ref_node(&fte->node, false);
 		tree_put_node(&fte->node, false);
+	} else if (fte->dests_size) {
+		if (fte->modify_mask)
+			modify_fte(fte);
+		up_write_ref_node(&fte->node, false);
 	} else {
 		up_write_ref_node(&fte->node, false);
 	}
-- 
2.35.1

[PATCH AUTOSEL 5.15 054/109] ASoC: dapm: Don't fold register value changes into notifications

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit ad685980469b9f9b99d4d6ea05f4cb8f57cb2234 ]

DAPM tracks and reports the value presented to the user from DAPM controls
separately to the register value, these may diverge during initialisation
or when an autodisable control is in use.

When writing DAPM controls we currently report that a change has occurred
if either the DAPM value or the value stored in the register has changed,
meaning that if the two are out of sync we may appear to report a spurious
event to userspace. Since we use this folded in value for nothing other
than the value reported to userspace simply drop the folding in of the
register change.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220428161833.3690050-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-dapm.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 0b166e074457..47b85ba5b7d6 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -3428,7 +3428,6 @@ int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
 			update.val = val;
 			card->update = &update;
 		}
-		change |= reg_change;
 
 		ret = soc_dapm_mixer_update_power(card, kcontrol, connect,
 						  rconnect);
@@ -3530,7 +3529,6 @@ int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol,
 			update.val = val;
 			card->update = &update;
 		}
-		change |= reg_change;
 
 		ret = soc_dapm_mux_update_power(card, kcontrol, item[0], e);
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 054/109] ASoC: dapm: Don't fold register value changes into notifications

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit ad685980469b9f9b99d4d6ea05f4cb8f57cb2234 ]

DAPM tracks and reports the value presented to the user from DAPM controls
separately to the register value, these may diverge during initialisation
or when an autodisable control is in use.

When writing DAPM controls we currently report that a change has occurred
if either the DAPM value or the value stored in the register has changed,
meaning that if the two are out of sync we may appear to report a spurious
event to userspace. Since we use this folded in value for nothing other
than the value reported to userspace simply drop the folding in of the
register change.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220428161833.3690050-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-dapm.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 0b166e074457..47b85ba5b7d6 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -3428,7 +3428,6 @@ int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
 			update.val = val;
 			card->update = &update;
 		}
-		change |= reg_change;
 
 		ret = soc_dapm_mixer_update_power(card, kcontrol, connect,
 						  rconnect);
@@ -3530,7 +3529,6 @@ int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol,
 			update.val = val;
 			card->update = &update;
 		}
-		change |= reg_change;
 
 		ret = soc_dapm_mux_update_power(card, kcontrol, item[0], e);
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 055/109] mlxsw: spectrum_dcb: Do not warn about priority changes

[Sasha Levin]

From: Petr Machata <petrm@nvidia.com>

[ Upstream commit b6b584562cbe7dc357083459d6dd5b171e12cadb ]

The idea behind the warnings is that the user would get warned in case when
more than one priority is configured for a given DSCP value on a netdevice.

The warning is currently wrong, because dcb_ieee_getapp_mask() returns
the first matching entry, not all of them, and the warning will then claim
that some priority is "current", when in fact it is not.

But more importantly, the warning is misleading in general. Consider the
following commands:

 # dcb app flush dev swp19 dscp-prio
 # dcb app add dev swp19 dscp-prio 24:3
 # dcb app replace dev swp19 dscp-prio 24:2

The last command will issue the following warning:

 mlxsw_spectrum3 0000:07:00.0 swp19: Ignoring new priority 2 for DSCP 24 in favor of current value of 3

The reason is that the "replace" command works by first adding the new
value, and then removing all old values. This is the only way to make the
replacement without causing the traffic to be prioritized to whatever the
chip defaults to. The warning is issued in response to adding the new
priority, and then no warning is shown when the old priority is removed.
The upshot is that the canonical way to change traffic prioritization
always produces a warning about ignoring the new priority, but what gets
configured is in fact what the user intended.

An option to just emit warning every time that the prioritization changes
just to make it clear that it happened is obviously unsatisfactory.

Therefore, in this patch, remove the warnings.

Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c
index 5f92b1691360..aff6d4f35cd2 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c
@@ -168,8 +168,6 @@ static int mlxsw_sp_dcbnl_ieee_setets(struct net_device *dev,
 static int mlxsw_sp_dcbnl_app_validate(struct net_device *dev,
 				       struct dcb_app *app)
 {
-	int prio;
-
 	if (app->priority >= IEEE_8021QAZ_MAX_TCS) {
 		netdev_err(dev, "APP entry with priority value %u is invalid\n",
 			   app->priority);
@@ -183,17 +181,6 @@ static int mlxsw_sp_dcbnl_app_validate(struct net_device *dev,
 				   app->protocol);
 			return -EINVAL;
 		}
-
-		/* Warn about any DSCP APP entries with the same PID. */
-		prio = fls(dcb_ieee_getapp_mask(dev, app));
-		if (prio--) {
-			if (prio < app->priority)
-				netdev_warn(dev, "Choosing priority %d for DSCP %d in favor of previously-active value of %d\n",
-					    app->priority, app->protocol, prio);
-			else if (prio > app->priority)
-				netdev_warn(dev, "Ignoring new priority %d for DSCP %d in favor of current value of %d\n",
-					    app->priority, app->protocol, prio);
-		}
 		break;
 
 	case IEEE_8021QAZ_APP_SEL_ETHERTYPE:
-- 
2.35.1

[PATCH AUTOSEL 5.15 056/109] mlxsw: Treat LLDP packets as control

[Sasha Levin]

From: Petr Machata <petrm@nvidia.com>

[ Upstream commit 0106668cd2f91bf913fb78972840dedfba80a3c3 ]

When trapping packets for on-CPU processing, Spectrum machines
differentiate between control and non-control traps. Traffic trapped
through non-control traps is treated as data and kept in shared buffer in
pools 0-4. Traffic trapped through control traps is kept in the dedicated
control buffer 9. The advantage of marking traps as control is that
pressure in the data plane does not prevent the control traffic to be
processed.

When the LLDP trap was introduced, it was marked as a control trap. But
then in commit aed4b5721143 ("mlxsw: spectrum: PTP: Hook into packet
receive path"), PTP traps were introduced. Because Ethernet-encapsulated
PTP packets look to the Spectrum-1 ASIC as LLDP traffic and are trapped
under the LLDP trap, this trap was reconfigured as non-control, in sync
with the PTP traps.

There is however no requirement that PTP traffic be handled as data.
Besides, the usual encapsulation for PTP traffic is UDP, not bare Ethernet,
and that is in deployments that even need PTP, which is far less common
than LLDP. This is reflected by the default policer, which was not bumped
up to the 19Kpps / 24Kpps that is the expected load of a PTP-enabled
Spectrum-1 switch.

Marking of LLDP trap as non-control was therefore probably misguided. In
this patch, change it back to control.

Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c
index 26d01adbedad..ce6f6590a777 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c
@@ -864,7 +864,7 @@ static const struct mlxsw_sp_trap_item mlxsw_sp_trap_items_arr[] = {
 		.trap = MLXSW_SP_TRAP_CONTROL(LLDP, LLDP, TRAP),
 		.listeners_arr = {
 			MLXSW_RXL(mlxsw_sp_rx_ptp_listener, LLDP, TRAP_TO_CPU,
-				  false, SP_LLDP, DISCARD),
+				  true, SP_LLDP, DISCARD),
 		},
 	},
 	{
-- 
2.35.1

[PATCH AUTOSEL 5.15 057/109] drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit b95b5391684b39695887afb4a13cccee7820f5d6 ]

Memory allocations should be done in sw_init.  hw_init should
just be hardware programming needed to initialize the IP block.
This is how most other IP blocks work.  Move the GPU memory
allocations from psp hw_init to psp sw_init and move the memory
free to sw_fini.  This also fixes a potential GPU memory leak
if psp hw_init fails.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 95 ++++++++++++-------------
 1 file changed, 47 insertions(+), 48 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index 86e2090bbd6e..57e9932d8a04 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -314,7 +314,39 @@ static int psp_sw_init(void *handle)
 		}
 	}
 
+	ret = amdgpu_bo_create_kernel(adev, PSP_1_MEG, PSP_1_MEG,
+				      amdgpu_sriov_vf(adev) ?
+				      AMDGPU_GEM_DOMAIN_VRAM : AMDGPU_GEM_DOMAIN_GTT,
+				      &psp->fw_pri_bo,
+				      &psp->fw_pri_mc_addr,
+				      &psp->fw_pri_buf);
+	if (ret)
+		return ret;
+
+	ret = amdgpu_bo_create_kernel(adev, PSP_FENCE_BUFFER_SIZE, PAGE_SIZE,
+				      AMDGPU_GEM_DOMAIN_VRAM,
+				      &psp->fence_buf_bo,
+				      &psp->fence_buf_mc_addr,
+				      &psp->fence_buf);
+	if (ret)
+		goto failed1;
+
+	ret = amdgpu_bo_create_kernel(adev, PSP_CMD_BUFFER_SIZE, PAGE_SIZE,
+				      AMDGPU_GEM_DOMAIN_VRAM,
+				      &psp->cmd_buf_bo, &psp->cmd_buf_mc_addr,
+				      (void **)&psp->cmd_buf_mem);
+	if (ret)
+		goto failed2;
+
 	return 0;
+
+failed2:
+	amdgpu_bo_free_kernel(&psp->fw_pri_bo,
+			      &psp->fw_pri_mc_addr, &psp->fw_pri_buf);
+failed1:
+	amdgpu_bo_free_kernel(&psp->fence_buf_bo,
+			      &psp->fence_buf_mc_addr, &psp->fence_buf);
+	return ret;
 }
 
 static int psp_sw_fini(void *handle)
@@ -344,6 +376,13 @@ static int psp_sw_fini(void *handle)
 	kfree(cmd);
 	cmd = NULL;
 
+	amdgpu_bo_free_kernel(&psp->fw_pri_bo,
+			      &psp->fw_pri_mc_addr, &psp->fw_pri_buf);
+	amdgpu_bo_free_kernel(&psp->fence_buf_bo,
+			      &psp->fence_buf_mc_addr, &psp->fence_buf);
+	amdgpu_bo_free_kernel(&psp->cmd_buf_bo, &psp->cmd_buf_mc_addr,
+			      (void **)&psp->cmd_buf_mem);
+
 	return 0;
 }
 
@@ -2580,51 +2619,18 @@ static int psp_load_fw(struct amdgpu_device *adev)
 	struct psp_context *psp = &adev->psp;
 
 	if (amdgpu_sriov_vf(adev) && amdgpu_in_reset(adev)) {
-		psp_ring_stop(psp, PSP_RING_TYPE__KM); /* should not destroy ring, only stop */
-		goto skip_memalloc;
-	}
-
-	if (amdgpu_sriov_vf(adev)) {
-		ret = amdgpu_bo_create_kernel(adev, PSP_1_MEG, PSP_1_MEG,
-						AMDGPU_GEM_DOMAIN_VRAM,
-						&psp->fw_pri_bo,
-						&psp->fw_pri_mc_addr,
-						&psp->fw_pri_buf);
+		/* should not destroy ring, only stop */
+		psp_ring_stop(psp, PSP_RING_TYPE__KM);
 	} else {
-		ret = amdgpu_bo_create_kernel(adev, PSP_1_MEG, PSP_1_MEG,
-						AMDGPU_GEM_DOMAIN_GTT,
-						&psp->fw_pri_bo,
-						&psp->fw_pri_mc_addr,
-						&psp->fw_pri_buf);
-	}
-
-	if (ret)
-		goto failed;
-
-	ret = amdgpu_bo_create_kernel(adev, PSP_FENCE_BUFFER_SIZE, PAGE_SIZE,
-					AMDGPU_GEM_DOMAIN_VRAM,
-					&psp->fence_buf_bo,
-					&psp->fence_buf_mc_addr,
-					&psp->fence_buf);
-	if (ret)
-		goto failed;
-
-	ret = amdgpu_bo_create_kernel(adev, PSP_CMD_BUFFER_SIZE, PAGE_SIZE,
-				      AMDGPU_GEM_DOMAIN_VRAM,
-				      &psp->cmd_buf_bo, &psp->cmd_buf_mc_addr,
-				      (void **)&psp->cmd_buf_mem);
-	if (ret)
-		goto failed;
+		memset(psp->fence_buf, 0, PSP_FENCE_BUFFER_SIZE);
 
-	memset(psp->fence_buf, 0, PSP_FENCE_BUFFER_SIZE);
-
-	ret = psp_ring_init(psp, PSP_RING_TYPE__KM);
-	if (ret) {
-		DRM_ERROR("PSP ring init failed!\n");
-		goto failed;
+		ret = psp_ring_init(psp, PSP_RING_TYPE__KM);
+		if (ret) {
+			DRM_ERROR("PSP ring init failed!\n");
+			goto failed;
+		}
 	}
 
-skip_memalloc:
 	ret = psp_hw_start(psp);
 	if (ret)
 		goto failed;
@@ -2730,13 +2736,6 @@ static int psp_hw_fini(void *handle)
 	psp_tmr_terminate(psp);
 	psp_ring_destroy(psp, PSP_RING_TYPE__KM);
 
-	amdgpu_bo_free_kernel(&psp->fw_pri_bo,
-			      &psp->fw_pri_mc_addr, &psp->fw_pri_buf);
-	amdgpu_bo_free_kernel(&psp->fence_buf_bo,
-			      &psp->fence_buf_mc_addr, &psp->fence_buf);
-	amdgpu_bo_free_kernel(&psp->cmd_buf_bo, &psp->cmd_buf_mc_addr,
-			      (void **)&psp->cmd_buf_mem);
-
 	return 0;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 057/109] drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit b95b5391684b39695887afb4a13cccee7820f5d6 ]

Memory allocations should be done in sw_init.  hw_init should
just be hardware programming needed to initialize the IP block.
This is how most other IP blocks work.  Move the GPU memory
allocations from psp hw_init to psp sw_init and move the memory
free to sw_fini.  This also fixes a potential GPU memory leak
if psp hw_init fails.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 95 ++++++++++++-------------
 1 file changed, 47 insertions(+), 48 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index 86e2090bbd6e..57e9932d8a04 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -314,7 +314,39 @@ static int psp_sw_init(void *handle)
 		}
 	}
 
+	ret = amdgpu_bo_create_kernel(adev, PSP_1_MEG, PSP_1_MEG,
+				      amdgpu_sriov_vf(adev) ?
+				      AMDGPU_GEM_DOMAIN_VRAM : AMDGPU_GEM_DOMAIN_GTT,
+				      &psp->fw_pri_bo,
+				      &psp->fw_pri_mc_addr,
+				      &psp->fw_pri_buf);
+	if (ret)
+		return ret;
+
+	ret = amdgpu_bo_create_kernel(adev, PSP_FENCE_BUFFER_SIZE, PAGE_SIZE,
+				      AMDGPU_GEM_DOMAIN_VRAM,
+				      &psp->fence_buf_bo,
+				      &psp->fence_buf_mc_addr,
+				      &psp->fence_buf);
+	if (ret)
+		goto failed1;
+
+	ret = amdgpu_bo_create_kernel(adev, PSP_CMD_BUFFER_SIZE, PAGE_SIZE,
+				      AMDGPU_GEM_DOMAIN_VRAM,
+				      &psp->cmd_buf_bo, &psp->cmd_buf_mc_addr,
+				      (void **)&psp->cmd_buf_mem);
+	if (ret)
+		goto failed2;
+
 	return 0;
+
+failed2:
+	amdgpu_bo_free_kernel(&psp->fw_pri_bo,
+			      &psp->fw_pri_mc_addr, &psp->fw_pri_buf);
+failed1:
+	amdgpu_bo_free_kernel(&psp->fence_buf_bo,
+			      &psp->fence_buf_mc_addr, &psp->fence_buf);
+	return ret;
 }
 
 static int psp_sw_fini(void *handle)
@@ -344,6 +376,13 @@ static int psp_sw_fini(void *handle)
 	kfree(cmd);
 	cmd = NULL;
 
+	amdgpu_bo_free_kernel(&psp->fw_pri_bo,
+			      &psp->fw_pri_mc_addr, &psp->fw_pri_buf);
+	amdgpu_bo_free_kernel(&psp->fence_buf_bo,
+			      &psp->fence_buf_mc_addr, &psp->fence_buf);
+	amdgpu_bo_free_kernel(&psp->cmd_buf_bo, &psp->cmd_buf_mc_addr,
+			      (void **)&psp->cmd_buf_mem);
+
 	return 0;
 }
 
@@ -2580,51 +2619,18 @@ static int psp_load_fw(struct amdgpu_device *adev)
 	struct psp_context *psp = &adev->psp;
 
 	if (amdgpu_sriov_vf(adev) && amdgpu_in_reset(adev)) {
-		psp_ring_stop(psp, PSP_RING_TYPE__KM); /* should not destroy ring, only stop */
-		goto skip_memalloc;
-	}
-
-	if (amdgpu_sriov_vf(adev)) {
-		ret = amdgpu_bo_create_kernel(adev, PSP_1_MEG, PSP_1_MEG,
-						AMDGPU_GEM_DOMAIN_VRAM,
-						&psp->fw_pri_bo,
-						&psp->fw_pri_mc_addr,
-						&psp->fw_pri_buf);
+		/* should not destroy ring, only stop */
+		psp_ring_stop(psp, PSP_RING_TYPE__KM);
 	} else {
-		ret = amdgpu_bo_create_kernel(adev, PSP_1_MEG, PSP_1_MEG,
-						AMDGPU_GEM_DOMAIN_GTT,
-						&psp->fw_pri_bo,
-						&psp->fw_pri_mc_addr,
-						&psp->fw_pri_buf);
-	}
-
-	if (ret)
-		goto failed;
-
-	ret = amdgpu_bo_create_kernel(adev, PSP_FENCE_BUFFER_SIZE, PAGE_SIZE,
-					AMDGPU_GEM_DOMAIN_VRAM,
-					&psp->fence_buf_bo,
-					&psp->fence_buf_mc_addr,
-					&psp->fence_buf);
-	if (ret)
-		goto failed;
-
-	ret = amdgpu_bo_create_kernel(adev, PSP_CMD_BUFFER_SIZE, PAGE_SIZE,
-				      AMDGPU_GEM_DOMAIN_VRAM,
-				      &psp->cmd_buf_bo, &psp->cmd_buf_mc_addr,
-				      (void **)&psp->cmd_buf_mem);
-	if (ret)
-		goto failed;
+		memset(psp->fence_buf, 0, PSP_FENCE_BUFFER_SIZE);
 
-	memset(psp->fence_buf, 0, PSP_FENCE_BUFFER_SIZE);
-
-	ret = psp_ring_init(psp, PSP_RING_TYPE__KM);
-	if (ret) {
-		DRM_ERROR("PSP ring init failed!\n");
-		goto failed;
+		ret = psp_ring_init(psp, PSP_RING_TYPE__KM);
+		if (ret) {
+			DRM_ERROR("PSP ring init failed!\n");
+			goto failed;
+		}
 	}
 
-skip_memalloc:
 	ret = psp_hw_start(psp);
 	if (ret)
 		goto failed;
@@ -2730,13 +2736,6 @@ static int psp_hw_fini(void *handle)
 	psp_tmr_terminate(psp);
 	psp_ring_destroy(psp, PSP_RING_TYPE__KM);
 
-	amdgpu_bo_free_kernel(&psp->fw_pri_bo,
-			      &psp->fw_pri_mc_addr, &psp->fw_pri_buf);
-	amdgpu_bo_free_kernel(&psp->fence_buf_bo,
-			      &psp->fence_buf_mc_addr, &psp->fence_buf);
-	amdgpu_bo_free_kernel(&psp->cmd_buf_bo, &psp->cmd_buf_mc_addr,
-			      (void **)&psp->cmd_buf_mem);
-
 	return 0;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 057/109] drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit b95b5391684b39695887afb4a13cccee7820f5d6 ]

Memory allocations should be done in sw_init.  hw_init should
just be hardware programming needed to initialize the IP block.
This is how most other IP blocks work.  Move the GPU memory
allocations from psp hw_init to psp sw_init and move the memory
free to sw_fini.  This also fixes a potential GPU memory leak
if psp hw_init fails.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 95 ++++++++++++-------------
 1 file changed, 47 insertions(+), 48 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index 86e2090bbd6e..57e9932d8a04 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -314,7 +314,39 @@ static int psp_sw_init(void *handle)
 		}
 	}
 
+	ret = amdgpu_bo_create_kernel(adev, PSP_1_MEG, PSP_1_MEG,
+				      amdgpu_sriov_vf(adev) ?
+				      AMDGPU_GEM_DOMAIN_VRAM : AMDGPU_GEM_DOMAIN_GTT,
+				      &psp->fw_pri_bo,
+				      &psp->fw_pri_mc_addr,
+				      &psp->fw_pri_buf);
+	if (ret)
+		return ret;
+
+	ret = amdgpu_bo_create_kernel(adev, PSP_FENCE_BUFFER_SIZE, PAGE_SIZE,
+				      AMDGPU_GEM_DOMAIN_VRAM,
+				      &psp->fence_buf_bo,
+				      &psp->fence_buf_mc_addr,
+				      &psp->fence_buf);
+	if (ret)
+		goto failed1;
+
+	ret = amdgpu_bo_create_kernel(adev, PSP_CMD_BUFFER_SIZE, PAGE_SIZE,
+				      AMDGPU_GEM_DOMAIN_VRAM,
+				      &psp->cmd_buf_bo, &psp->cmd_buf_mc_addr,
+				      (void **)&psp->cmd_buf_mem);
+	if (ret)
+		goto failed2;
+
 	return 0;
+
+failed2:
+	amdgpu_bo_free_kernel(&psp->fw_pri_bo,
+			      &psp->fw_pri_mc_addr, &psp->fw_pri_buf);
+failed1:
+	amdgpu_bo_free_kernel(&psp->fence_buf_bo,
+			      &psp->fence_buf_mc_addr, &psp->fence_buf);
+	return ret;
 }
 
 static int psp_sw_fini(void *handle)
@@ -344,6 +376,13 @@ static int psp_sw_fini(void *handle)
 	kfree(cmd);
 	cmd = NULL;
 
+	amdgpu_bo_free_kernel(&psp->fw_pri_bo,
+			      &psp->fw_pri_mc_addr, &psp->fw_pri_buf);
+	amdgpu_bo_free_kernel(&psp->fence_buf_bo,
+			      &psp->fence_buf_mc_addr, &psp->fence_buf);
+	amdgpu_bo_free_kernel(&psp->cmd_buf_bo, &psp->cmd_buf_mc_addr,
+			      (void **)&psp->cmd_buf_mem);
+
 	return 0;
 }
 
@@ -2580,51 +2619,18 @@ static int psp_load_fw(struct amdgpu_device *adev)
 	struct psp_context *psp = &adev->psp;
 
 	if (amdgpu_sriov_vf(adev) && amdgpu_in_reset(adev)) {
-		psp_ring_stop(psp, PSP_RING_TYPE__KM); /* should not destroy ring, only stop */
-		goto skip_memalloc;
-	}
-
-	if (amdgpu_sriov_vf(adev)) {
-		ret = amdgpu_bo_create_kernel(adev, PSP_1_MEG, PSP_1_MEG,
-						AMDGPU_GEM_DOMAIN_VRAM,
-						&psp->fw_pri_bo,
-						&psp->fw_pri_mc_addr,
-						&psp->fw_pri_buf);
+		/* should not destroy ring, only stop */
+		psp_ring_stop(psp, PSP_RING_TYPE__KM);
 	} else {
-		ret = amdgpu_bo_create_kernel(adev, PSP_1_MEG, PSP_1_MEG,
-						AMDGPU_GEM_DOMAIN_GTT,
-						&psp->fw_pri_bo,
-						&psp->fw_pri_mc_addr,
-						&psp->fw_pri_buf);
-	}
-
-	if (ret)
-		goto failed;
-
-	ret = amdgpu_bo_create_kernel(adev, PSP_FENCE_BUFFER_SIZE, PAGE_SIZE,
-					AMDGPU_GEM_DOMAIN_VRAM,
-					&psp->fence_buf_bo,
-					&psp->fence_buf_mc_addr,
-					&psp->fence_buf);
-	if (ret)
-		goto failed;
-
-	ret = amdgpu_bo_create_kernel(adev, PSP_CMD_BUFFER_SIZE, PAGE_SIZE,
-				      AMDGPU_GEM_DOMAIN_VRAM,
-				      &psp->cmd_buf_bo, &psp->cmd_buf_mc_addr,
-				      (void **)&psp->cmd_buf_mem);
-	if (ret)
-		goto failed;
+		memset(psp->fence_buf, 0, PSP_FENCE_BUFFER_SIZE);
 
-	memset(psp->fence_buf, 0, PSP_FENCE_BUFFER_SIZE);
-
-	ret = psp_ring_init(psp, PSP_RING_TYPE__KM);
-	if (ret) {
-		DRM_ERROR("PSP ring init failed!\n");
-		goto failed;
+		ret = psp_ring_init(psp, PSP_RING_TYPE__KM);
+		if (ret) {
+			DRM_ERROR("PSP ring init failed!\n");
+			goto failed;
+		}
 	}
 
-skip_memalloc:
 	ret = psp_hw_start(psp);
 	if (ret)
 		goto failed;
@@ -2730,13 +2736,6 @@ static int psp_hw_fini(void *handle)
 	psp_tmr_terminate(psp);
 	psp_ring_destroy(psp, PSP_RING_TYPE__KM);
 
-	amdgpu_bo_free_kernel(&psp->fw_pri_bo,
-			      &psp->fw_pri_mc_addr, &psp->fw_pri_buf);
-	amdgpu_bo_free_kernel(&psp->fence_buf_bo,
-			      &psp->fence_buf_mc_addr, &psp->fence_buf);
-	amdgpu_bo_free_kernel(&psp->cmd_buf_bo, &psp->cmd_buf_mc_addr,
-			      (void **)&psp->cmd_buf_mem);
-
 	return 0;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 058/109] drm/amdgpu/ucode: Remove firmware load type check in amdgpu_ucode_free_bo

[Sasha Levin]

From: Alice Wong <shiwei.wong@amd.com>

[ Upstream commit ab0cd4a9ae5b4679b714d8dbfedc0901fecdce9f ]

When psp_hw_init failed, it will set the load_type to AMDGPU_FW_LOAD_DIRECT.
During amdgpu_device_ip_fini, amdgpu_ucode_free_bo checks that load_type is
AMDGPU_FW_LOAD_DIRECT and skips deallocating fw_buf causing memory leak.
Remove load_type check in amdgpu_ucode_free_bo.

Signed-off-by: Alice Wong <shiwei.wong@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
index abd8469380e5..0ed0736d515a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
@@ -723,8 +723,7 @@ int amdgpu_ucode_create_bo(struct amdgpu_device *adev)
 
 void amdgpu_ucode_free_bo(struct amdgpu_device *adev)
 {
-	if (adev->firmware.load_type != AMDGPU_FW_LOAD_DIRECT)
-		amdgpu_bo_free_kernel(&adev->firmware.fw_buf,
+	amdgpu_bo_free_kernel(&adev->firmware.fw_buf,
 		&adev->firmware.fw_buf_mc,
 		&adev->firmware.fw_buf_ptr);
 }
-- 
2.35.1

[PATCH AUTOSEL 5.15 058/109] drm/amdgpu/ucode: Remove firmware load type check in amdgpu_ucode_free_bo

[Sasha Levin]

From: Alice Wong <shiwei.wong@amd.com>

[ Upstream commit ab0cd4a9ae5b4679b714d8dbfedc0901fecdce9f ]

When psp_hw_init failed, it will set the load_type to AMDGPU_FW_LOAD_DIRECT.
During amdgpu_device_ip_fini, amdgpu_ucode_free_bo checks that load_type is
AMDGPU_FW_LOAD_DIRECT and skips deallocating fw_buf causing memory leak.
Remove load_type check in amdgpu_ucode_free_bo.

Signed-off-by: Alice Wong <shiwei.wong@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
index abd8469380e5..0ed0736d515a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
@@ -723,8 +723,7 @@ int amdgpu_ucode_create_bo(struct amdgpu_device *adev)
 
 void amdgpu_ucode_free_bo(struct amdgpu_device *adev)
 {
-	if (adev->firmware.load_type != AMDGPU_FW_LOAD_DIRECT)
-		amdgpu_bo_free_kernel(&adev->firmware.fw_buf,
+	amdgpu_bo_free_kernel(&adev->firmware.fw_buf,
 		&adev->firmware.fw_buf_mc,
 		&adev->firmware.fw_buf_ptr);
 }
-- 
2.35.1

[PATCH AUTOSEL 5.15 058/109] drm/amdgpu/ucode: Remove firmware load type check in amdgpu_ucode_free_bo

[Sasha Levin]

From: Alice Wong <shiwei.wong@amd.com>

[ Upstream commit ab0cd4a9ae5b4679b714d8dbfedc0901fecdce9f ]

When psp_hw_init failed, it will set the load_type to AMDGPU_FW_LOAD_DIRECT.
During amdgpu_device_ip_fini, amdgpu_ucode_free_bo checks that load_type is
AMDGPU_FW_LOAD_DIRECT and skips deallocating fw_buf causing memory leak.
Remove load_type check in amdgpu_ucode_free_bo.

Signed-off-by: Alice Wong <shiwei.wong@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
index abd8469380e5..0ed0736d515a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
@@ -723,8 +723,7 @@ int amdgpu_ucode_create_bo(struct amdgpu_device *adev)
 
 void amdgpu_ucode_free_bo(struct amdgpu_device *adev)
 {
-	if (adev->firmware.load_type != AMDGPU_FW_LOAD_DIRECT)
-		amdgpu_bo_free_kernel(&adev->firmware.fw_buf,
+	amdgpu_bo_free_kernel(&adev->firmware.fw_buf,
 		&adev->firmware.fw_buf_mc,
 		&adev->firmware.fw_buf_ptr);
 }
-- 
2.35.1

[PATCH AUTOSEL 5.15 059/109] regulator: mt6315: Enforce regulator-compatible, not name

[Sasha Levin]

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit 6d435a94ba5bb4f2ad381c0828fbae89c66b50fe ]

The MT6315 PMIC dt-binding should enforce that one of the valid
regulator-compatible is set in each regulator node. However it was
mistakenly matching against regulator-name instead.

Fix the typo. This not only fixes the compatible verification, but also
lifts the regulator-name restriction, so that more meaningful names can
be set for each platform.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220429201325.2205799-1-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/regulator/mt6315-regulator.yaml         | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index 61dd5af80db6..5d2d989de893 100644
--- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -31,7 +31,7 @@ properties:
         $ref: "regulator.yaml#"
 
         properties:
-          regulator-name:
+          regulator-compatible:
             pattern: "^vbuck[1-4]$"
 
     additionalProperties: false
-- 
2.35.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.15 059/109] regulator: mt6315: Enforce regulator-compatible, not name

[Sasha Levin]

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit 6d435a94ba5bb4f2ad381c0828fbae89c66b50fe ]

The MT6315 PMIC dt-binding should enforce that one of the valid
regulator-compatible is set in each regulator node. However it was
mistakenly matching against regulator-name instead.

Fix the typo. This not only fixes the compatible verification, but also
lifts the regulator-name restriction, so that more meaningful names can
be set for each platform.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220429201325.2205799-1-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/regulator/mt6315-regulator.yaml         | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index 61dd5af80db6..5d2d989de893 100644
--- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -31,7 +31,7 @@ properties:
         $ref: "regulator.yaml#"
 
         properties:
-          regulator-name:
+          regulator-compatible:
             pattern: "^vbuck[1-4]$"
 
     additionalProperties: false
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 059/109] regulator: mt6315: Enforce regulator-compatible, not name

[Sasha Levin]

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit 6d435a94ba5bb4f2ad381c0828fbae89c66b50fe ]

The MT6315 PMIC dt-binding should enforce that one of the valid
regulator-compatible is set in each regulator node. However it was
mistakenly matching against regulator-name instead.

Fix the typo. This not only fixes the compatible verification, but also
lifts the regulator-name restriction, so that more meaningful names can
be set for each platform.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220429201325.2205799-1-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/regulator/mt6315-regulator.yaml         | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index 61dd5af80db6..5d2d989de893 100644
--- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -31,7 +31,7 @@ properties:
         $ref: "regulator.yaml#"
 
         properties:
-          regulator-name:
+          regulator-compatible:
             pattern: "^vbuck[1-4]$"
 
     additionalProperties: false
-- 
2.35.1

[PATCH AUTOSEL 5.15 060/109] HID: bigben: fix slab-out-of-bounds Write in bigben_probe

[Sasha Levin]

From: Dongliang Mu <mudongliangabcd@gmail.com>

[ Upstream commit fc4ef9d5724973193bfa5ebed181dba6de3a56db ]

There is a slab-out-of-bounds Write bug in hid-bigbenff driver.
The problem is the driver assumes the device must have an input but
some malicious devices violate this assumption.

Fix this by checking hid_device's input is non-empty before its usage.

Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-bigbenff.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/hid/hid-bigbenff.c b/drivers/hid/hid-bigbenff.c
index 74ad8bf98bfd..e8c5e3ac9fff 100644
--- a/drivers/hid/hid-bigbenff.c
+++ b/drivers/hid/hid-bigbenff.c
@@ -347,6 +347,12 @@ static int bigben_probe(struct hid_device *hid,
 	bigben->report = list_entry(report_list->next,
 		struct hid_report, list);
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		error = -ENODEV;
+		goto error_hw_stop;
+	}
+
 	hidinput = list_first_entry(&hid->inputs, struct hid_input, list);
 	set_bit(FF_RUMBLE, hidinput->input->ffbit);
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 061/109] of: Support more than one crash kernel regions for kexec -s

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 8af6b91f58341325bf74ecb0389ddc0039091d84 ]

When "crashkernel=X,high" is used, there may be two crash regions:
high=crashk_res and low=crashk_low_res. But now the syscall
kexec_file_load() only add crashk_res into "linux,usable-memory-range",
this may cause the second kernel to have no available dma memory.

Fix it like kexec-tools does for option -c, add both 'high' and 'low'
regions into the dtb.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-6-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/kexec.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c
index 761fd870d1db..72c790a3c910 100644
--- a/drivers/of/kexec.c
+++ b/drivers/of/kexec.c
@@ -386,6 +386,15 @@ void *of_kexec_alloc_and_setup_fdt(const struct kimage *image,
 				crashk_res.end - crashk_res.start + 1);
 		if (ret)
 			goto out;
+
+		if (crashk_low_res.end) {
+			ret = fdt_appendprop_addrrange(fdt, 0, chosen_node,
+					"linux,usable-memory-range",
+					crashk_low_res.start,
+					crashk_low_res.end - crashk_low_res.start + 1);
+			if (ret)
+				goto out;
+		}
 	}
 
 	/* add bootargs */
-- 
2.35.1

[PATCH AUTOSEL 5.15 062/109] ASoC: tscs454: Add endianness flag in snd_soc_component_driver

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit ff69ec96b87dccb3a29edef8cec5d4fefbbc2055 ]

The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.

A fixup is also required to use the width directly rather than relying
on the format in hw_params, now both little and big endian would be
supported. It is worth noting this changes the behaviour of S24_LE to
use a word length of 24 rather than 32. This would appear to be a
correction since the fact S24_LE is stored as 32 bits should not be
presented over the bus.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-26-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/tscs454.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/tscs454.c b/sound/soc/codecs/tscs454.c
index 43220bb36701..c27ca9a273e1 100644
--- a/sound/soc/codecs/tscs454.c
+++ b/sound/soc/codecs/tscs454.c
@@ -3120,18 +3120,17 @@ static int set_aif_sample_format(struct snd_soc_component *component,
 	unsigned int width;
 	int ret;
 
-	switch (format) {
-	case SNDRV_PCM_FORMAT_S16_LE:
+	switch (snd_pcm_format_width(format)) {
+	case 16:
 		width = FV_WL_16;
 		break;
-	case SNDRV_PCM_FORMAT_S20_3LE:
+	case 20:
 		width = FV_WL_20;
 		break;
-	case SNDRV_PCM_FORMAT_S24_3LE:
+	case 24:
 		width = FV_WL_24;
 		break;
-	case SNDRV_PCM_FORMAT_S24_LE:
-	case SNDRV_PCM_FORMAT_S32_LE:
+	case 32:
 		width = FV_WL_32;
 		break;
 	default:
@@ -3326,6 +3325,7 @@ static const struct snd_soc_component_driver soc_component_dev_tscs454 = {
 	.num_dapm_routes = ARRAY_SIZE(tscs454_intercon),
 	.controls =	tscs454_snd_controls,
 	.num_controls = ARRAY_SIZE(tscs454_snd_controls),
+	.endianness = 1,
 };
 
 #define TSCS454_RATES SNDRV_PCM_RATE_8000_96000
-- 
2.35.1

[PATCH AUTOSEL 5.15 062/109] ASoC: tscs454: Add endianness flag in snd_soc_component_driver

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit ff69ec96b87dccb3a29edef8cec5d4fefbbc2055 ]

The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.

A fixup is also required to use the width directly rather than relying
on the format in hw_params, now both little and big endian would be
supported. It is worth noting this changes the behaviour of S24_LE to
use a word length of 24 rather than 32. This would appear to be a
correction since the fact S24_LE is stored as 32 bits should not be
presented over the bus.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-26-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/tscs454.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/tscs454.c b/sound/soc/codecs/tscs454.c
index 43220bb36701..c27ca9a273e1 100644
--- a/sound/soc/codecs/tscs454.c
+++ b/sound/soc/codecs/tscs454.c
@@ -3120,18 +3120,17 @@ static int set_aif_sample_format(struct snd_soc_component *component,
 	unsigned int width;
 	int ret;
 
-	switch (format) {
-	case SNDRV_PCM_FORMAT_S16_LE:
+	switch (snd_pcm_format_width(format)) {
+	case 16:
 		width = FV_WL_16;
 		break;
-	case SNDRV_PCM_FORMAT_S20_3LE:
+	case 20:
 		width = FV_WL_20;
 		break;
-	case SNDRV_PCM_FORMAT_S24_3LE:
+	case 24:
 		width = FV_WL_24;
 		break;
-	case SNDRV_PCM_FORMAT_S24_LE:
-	case SNDRV_PCM_FORMAT_S32_LE:
+	case 32:
 		width = FV_WL_32;
 		break;
 	default:
@@ -3326,6 +3325,7 @@ static const struct snd_soc_component_driver soc_component_dev_tscs454 = {
 	.num_dapm_routes = ARRAY_SIZE(tscs454_intercon),
 	.controls =	tscs454_snd_controls,
 	.num_controls = ARRAY_SIZE(tscs454_snd_controls),
+	.endianness = 1,
 };
 
 #define TSCS454_RATES SNDRV_PCM_RATE_8000_96000
-- 
2.35.1

[PATCH AUTOSEL 5.15 063/109] scsi: lpfc: Alter FPIN stat accounting logic

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit e6f51041450282a8668af3a8fc5c7744e81a447c ]

When configuring CMF management based on signals instead of FPINs, FPIN
alarm and warning statistics are not tracked.

Change the behavior so that FPIN alarms and warnings are always tracked
regardless of the configured mode.

Similar changes are made in the CMF signal stat accounting logic.  Upon
receipt of a signal, only track signaled alarms and warnings. FPIN stats
should not be incremented upon receipt of a signal.

Link: https://lore.kernel.org/r/20220506035519.50908-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_els.c  | 49 +++++++++++------------------------
 drivers/scsi/lpfc/lpfc_init.c | 22 ++--------------
 2 files changed, 17 insertions(+), 54 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 886006ad12a2..ce28c4a30460 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -3777,9 +3777,6 @@ lpfc_least_capable_settings(struct lpfc_hba *phba,
 {
 	u32 rsp_sig_cap = 0, drv_sig_cap = 0;
 	u32 rsp_sig_freq_cyc = 0, rsp_sig_freq_scale = 0;
-	struct lpfc_cgn_info *cp;
-	u32 crc;
-	u16 sig_freq;
 
 	/* Get rsp signal and frequency capabilities.  */
 	rsp_sig_cap = be32_to_cpu(pcgd->xmt_signal_capability);
@@ -3835,25 +3832,7 @@ lpfc_least_capable_settings(struct lpfc_hba *phba,
 		}
 	}
 
-	if (!phba->cgn_i)
-		return;
-
-	/* Update signal frequency in congestion info buffer */
-	cp = (struct lpfc_cgn_info *)phba->cgn_i->virt;
-
-	/* Frequency (in ms) Signal Warning/Signal Congestion Notifications
-	 * are received by the HBA
-	 */
-	sig_freq = phba->cgn_sig_freq;
-
-	if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY)
-		cp->cgn_warn_freq = cpu_to_le16(sig_freq);
-	if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) {
-		cp->cgn_alarm_freq = cpu_to_le16(sig_freq);
-		cp->cgn_warn_freq = cpu_to_le16(sig_freq);
-	}
-	crc = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ, LPFC_CGN_CRC32_SEED);
-	cp->cgn_info_crc = cpu_to_le32(crc);
+	/* We are NOT recording signal frequency in congestion info buffer */
 	return;
 
 out_no_support:
@@ -9584,11 +9563,14 @@ lpfc_els_rcv_fpin_cgn(struct lpfc_hba *phba, struct fc_tlv_desc *tlv)
 			/* Take action here for an Alarm event */
 			if (phba->cmf_active_mode != LPFC_CFG_OFF) {
 				if (phba->cgn_reg_fpin & LPFC_CGN_FPIN_ALARM) {
-					/* Track of alarm cnt for cgn_info */
-					atomic_inc(&phba->cgn_fabric_alarm_cnt);
 					/* Track of alarm cnt for SYNC_WQE */
 					atomic_inc(&phba->cgn_sync_alarm_cnt);
 				}
+				/* Track alarm cnt for cgn_info regardless
+				 * of whether CMF is configured for Signals
+				 * or FPINs.
+				 */
+				atomic_inc(&phba->cgn_fabric_alarm_cnt);
 				goto cleanup;
 			}
 			break;
@@ -9596,11 +9578,14 @@ lpfc_els_rcv_fpin_cgn(struct lpfc_hba *phba, struct fc_tlv_desc *tlv)
 			/* Take action here for a Warning event */
 			if (phba->cmf_active_mode != LPFC_CFG_OFF) {
 				if (phba->cgn_reg_fpin & LPFC_CGN_FPIN_WARN) {
-					/* Track of warning cnt for cgn_info */
-					atomic_inc(&phba->cgn_fabric_warn_cnt);
 					/* Track of warning cnt for SYNC_WQE */
 					atomic_inc(&phba->cgn_sync_warn_cnt);
 				}
+				/* Track warning cnt and freq for cgn_info
+				 * regardless of whether CMF is configured for
+				 * Signals or FPINs.
+				 */
+				atomic_inc(&phba->cgn_fabric_warn_cnt);
 cleanup:
 				/* Save frequency in ms */
 				phba->cgn_fpin_frequency =
@@ -9609,14 +9594,10 @@ lpfc_els_rcv_fpin_cgn(struct lpfc_hba *phba, struct fc_tlv_desc *tlv)
 				if (phba->cgn_i) {
 					cp = (struct lpfc_cgn_info *)
 						phba->cgn_i->virt;
-					if (phba->cgn_reg_fpin &
-						LPFC_CGN_FPIN_ALARM)
-						cp->cgn_alarm_freq =
-							cpu_to_le16(value);
-					if (phba->cgn_reg_fpin &
-						LPFC_CGN_FPIN_WARN)
-						cp->cgn_warn_freq =
-							cpu_to_le16(value);
+					cp->cgn_alarm_freq =
+						cpu_to_le16(value);
+					cp->cgn_warn_freq =
+						cpu_to_le16(value);
 					crc = lpfc_cgn_calc_crc32
 						(cp,
 						LPFC_CGN_INFO_SZ,
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index ce103c1f8062..a2694fb32b5d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -5795,21 +5795,8 @@ lpfc_cgn_save_evt_cnt(struct lpfc_hba *phba)
 
 	/* Use the frequency found in the last rcv'ed FPIN */
 	value = phba->cgn_fpin_frequency;
-	if (phba->cgn_reg_fpin & LPFC_CGN_FPIN_WARN)
-		cp->cgn_warn_freq = cpu_to_le16(value);
-	if (phba->cgn_reg_fpin & LPFC_CGN_FPIN_ALARM)
-		cp->cgn_alarm_freq = cpu_to_le16(value);
-
-	/* Frequency (in ms) Signal Warning/Signal Congestion Notifications
-	 * are received by the HBA
-	 */
-	value = phba->cgn_sig_freq;
-
-	if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY ||
-	    phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM)
-		cp->cgn_warn_freq = cpu_to_le16(value);
-	if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM)
-		cp->cgn_alarm_freq = cpu_to_le16(value);
+	cp->cgn_warn_freq = cpu_to_le16(value);
+	cp->cgn_alarm_freq = cpu_to_le16(value);
 
 	lvalue = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ,
 				     LPFC_CGN_CRC32_SEED);
@@ -6493,9 +6480,6 @@ lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
 		/* Alarm overrides warning, so check that first */
 		if (cgn_signal->alarm_cnt) {
 			if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) {
-				/* Keep track of alarm cnt for cgn_info */
-				atomic_add(cgn_signal->alarm_cnt,
-					   &phba->cgn_fabric_alarm_cnt);
 				/* Keep track of alarm cnt for CMF_SYNC_WQE */
 				atomic_add(cgn_signal->alarm_cnt,
 					   &phba->cgn_sync_alarm_cnt);
@@ -6504,8 +6488,6 @@ lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
 			/* signal action needs to be taken */
 			if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY ||
 			    phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) {
-				/* Keep track of warning cnt for cgn_info */
-				atomic_add(cnt, &phba->cgn_fabric_warn_cnt);
 				/* Keep track of warning cnt for CMF_SYNC_WQE */
 				atomic_add(cnt, &phba->cgn_sync_warn_cnt);
 			}
-- 
2.35.1

[PATCH AUTOSEL 5.15 064/109] net: remove two BUG() from skb_checksum_help()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit d7ea0d9df2a6265b2b180d17ebc64b38105968fc ]

I have a syzbot report that managed to get a crash in skb_checksum_help()

If syzbot can trigger these BUG(), it makes sense to replace
them with more friendly WARN_ON_ONCE() since skb_checksum_help()
can instead return an error code.

Note that syzbot will still crash there, until real bug is fixed.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 5907212c00f3..b9731b267d07 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3233,11 +3233,15 @@ int skb_checksum_help(struct sk_buff *skb)
 	}
 
 	offset = skb_checksum_start_offset(skb);
-	BUG_ON(offset >= skb_headlen(skb));
+	ret = -EINVAL;
+	if (WARN_ON_ONCE(offset >= skb_headlen(skb)))
+		goto out;
+
 	csum = skb_checksum(skb, offset, skb->len - offset, 0);
 
 	offset += skb->csum_offset;
-	BUG_ON(offset + sizeof(__sum16) > skb_headlen(skb));
+	if (WARN_ON_ONCE(offset + sizeof(__sum16) > skb_headlen(skb)))
+		goto out;
 
 	ret = skb_ensure_writable(skb, offset + sizeof(__sum16));
 	if (ret)
-- 
2.35.1

[PATCH AUTOSEL 5.15 065/109] s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 63678eecec57fc51b778be3da35a397931287170 ]

gcc 12 does not (always) optimize away code that should only be generated
if parameters are constant and within in a certain range. This depends on
various obscure kernel config options, however in particular
PROFILE_ALL_BRANCHES can trigger this compile error:

In function ‘__atomic_add_const’,
    inlined from ‘__preempt_count_add.part.0’ at ./arch/s390/include/asm/preempt.h:50:3:
./arch/s390/include/asm/atomic_ops.h:80:9: error: impossible constraint in ‘asm’
   80 |         asm volatile(                                                   \
      |         ^~~

Workaround this by simply disabling the optimization for
PROFILE_ALL_BRANCHES, since the kernel will be so slow, that this
optimization won't matter at all.

Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/preempt.h | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/arch/s390/include/asm/preempt.h b/arch/s390/include/asm/preempt.h
index d9d5350cc3ec..bf15da0fedbc 100644
--- a/arch/s390/include/asm/preempt.h
+++ b/arch/s390/include/asm/preempt.h
@@ -46,10 +46,17 @@ static inline bool test_preempt_need_resched(void)
 
 static inline void __preempt_count_add(int val)
 {
-	if (__builtin_constant_p(val) && (val >= -128) && (val <= 127))
-		__atomic_add_const(val, &S390_lowcore.preempt_count);
-	else
-		__atomic_add(val, &S390_lowcore.preempt_count);
+	/*
+	 * With some obscure config options and CONFIG_PROFILE_ALL_BRANCHES
+	 * enabled, gcc 12 fails to handle __builtin_constant_p().
+	 */
+	if (!IS_ENABLED(CONFIG_PROFILE_ALL_BRANCHES)) {
+		if (__builtin_constant_p(val) && (val >= -128) && (val <= 127)) {
+			__atomic_add_const(val, &S390_lowcore.preempt_count);
+			return;
+		}
+	}
+	__atomic_add(val, &S390_lowcore.preempt_count);
 }
 
 static inline void __preempt_count_sub(int val)
-- 
2.35.1

[PATCH AUTOSEL 5.15 066/109] perf/amd/ibs: Cascade pmu init functions' return value

[Sasha Levin]

From: Ravi Bangoria <ravi.bangoria@amd.com>

[ Upstream commit 39b2ca75eec8a33e2ffdb8aa0c4840ec3e3b472c ]

IBS pmu initialization code ignores return value provided by
callee functions. Fix it.

Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220509044914.1473-2-ravi.bangoria@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/amd/ibs.c | 37 +++++++++++++++++++++++++++++--------
 1 file changed, 29 insertions(+), 8 deletions(-)

diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 9739019d4b67..367ca899e6e8 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -759,9 +759,10 @@ static __init int perf_ibs_pmu_init(struct perf_ibs *perf_ibs, char *name)
 	return ret;
 }
 
-static __init void perf_event_ibs_init(void)
+static __init int perf_event_ibs_init(void)
 {
 	struct attribute **attr = ibs_op_format_attrs;
+	int ret;
 
 	/*
 	 * Some chips fail to reset the fetch count when it is written; instead
@@ -773,7 +774,9 @@ static __init void perf_event_ibs_init(void)
 	if (boot_cpu_data.x86 == 0x19 && boot_cpu_data.x86_model < 0x10)
 		perf_ibs_fetch.fetch_ignore_if_zero_rip = 1;
 
-	perf_ibs_pmu_init(&perf_ibs_fetch, "ibs_fetch");
+	ret = perf_ibs_pmu_init(&perf_ibs_fetch, "ibs_fetch");
+	if (ret)
+		return ret;
 
 	if (ibs_caps & IBS_CAPS_OPCNT) {
 		perf_ibs_op.config_mask |= IBS_OP_CNT_CTL;
@@ -786,15 +789,35 @@ static __init void perf_event_ibs_init(void)
 		perf_ibs_op.cnt_mask    |= IBS_OP_MAX_CNT_EXT_MASK;
 	}
 
-	perf_ibs_pmu_init(&perf_ibs_op, "ibs_op");
+	ret = perf_ibs_pmu_init(&perf_ibs_op, "ibs_op");
+	if (ret)
+		goto err_op;
+
+	ret = register_nmi_handler(NMI_LOCAL, perf_ibs_nmi_handler, 0, "perf_ibs");
+	if (ret)
+		goto err_nmi;
 
-	register_nmi_handler(NMI_LOCAL, perf_ibs_nmi_handler, 0, "perf_ibs");
 	pr_info("perf: AMD IBS detected (0x%08x)\n", ibs_caps);
+	return 0;
+
+err_nmi:
+	perf_pmu_unregister(&perf_ibs_op.pmu);
+	free_percpu(perf_ibs_op.pcpu);
+	perf_ibs_op.pcpu = NULL;
+err_op:
+	perf_pmu_unregister(&perf_ibs_fetch.pmu);
+	free_percpu(perf_ibs_fetch.pcpu);
+	perf_ibs_fetch.pcpu = NULL;
+
+	return ret;
 }
 
 #else /* defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD) */
 
-static __init void perf_event_ibs_init(void) { }
+static __init int perf_event_ibs_init(void)
+{
+	return 0;
+}
 
 #endif
 
@@ -1064,9 +1087,7 @@ static __init int amd_ibs_init(void)
 			  x86_pmu_amd_ibs_starting_cpu,
 			  x86_pmu_amd_ibs_dying_cpu);
 
-	perf_event_ibs_init();
-
-	return 0;
+	return perf_event_ibs_init();
 }
 
 /* Since we need the pci subsystem to init ibs we can't do this earlier: */
-- 
2.35.1

[PATCH AUTOSEL 5.15 067/109] sched/core: Avoid obvious double update_rq_clock warning

[Sasha Levin]

From: Hao Jia <jiahao.os@bytedance.com>

[ Upstream commit 2679a83731d51a744657f718fc02c3b077e47562 ]

When we use raw_spin_rq_lock() to acquire the rq lock and have to
update the rq clock while holding the lock, the kernel may issue
a WARN_DOUBLE_CLOCK warning.

Since we directly use raw_spin_rq_lock() to acquire rq lock instead of
rq_lock(), there is no corresponding change to rq->clock_update_flags.
In particular, we have obtained the rq lock of other CPUs, the
rq->clock_update_flags of this CPU may be RQCF_UPDATED at this time, and
then calling update_rq_clock() will trigger the WARN_DOUBLE_CLOCK warning.

So we need to clear RQCF_UPDATED of rq->clock_update_flags to avoid
the WARN_DOUBLE_CLOCK warning.

For the sched_rt_period_timer() and migrate_task_rq_dl() cases
we simply replace raw_spin_rq_lock()/raw_spin_rq_unlock() with
rq_lock()/rq_unlock().

For the {pull,push}_{rt,dl}_task() cases, we add the
double_rq_clock_clear_update() function to clear RQCF_UPDATED of
rq->clock_update_flags, and call double_rq_clock_clear_update()
before double_lock_balance()/double_rq_lock() returns to avoid the
WARN_DOUBLE_CLOCK warning.

Some call trace reports:
Call Trace 1:
 <IRQ>
 sched_rt_period_timer+0x10f/0x3a0
 ? enqueue_top_rt_rq+0x110/0x110
 __hrtimer_run_queues+0x1a9/0x490
 hrtimer_interrupt+0x10b/0x240
 __sysvec_apic_timer_interrupt+0x8a/0x250
 sysvec_apic_timer_interrupt+0x9a/0xd0
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x12/0x20

Call Trace 2:
 <TASK>
 activate_task+0x8b/0x110
 push_rt_task.part.108+0x241/0x2c0
 push_rt_tasks+0x15/0x30
 finish_task_switch+0xaa/0x2e0
 ? __switch_to+0x134/0x420
 __schedule+0x343/0x8e0
 ? hrtimer_start_range_ns+0x101/0x340
 schedule+0x4e/0xb0
 do_nanosleep+0x8e/0x160
 hrtimer_nanosleep+0x89/0x120
 ? hrtimer_init_sleeper+0x90/0x90
 __x64_sys_nanosleep+0x96/0xd0
 do_syscall_64+0x34/0x90
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Call Trace 3:
 <TASK>
 deactivate_task+0x93/0xe0
 pull_rt_task+0x33e/0x400
 balance_rt+0x7e/0x90
 __schedule+0x62f/0x8e0
 do_task_dead+0x3f/0x50
 do_exit+0x7b8/0xbb0
 do_group_exit+0x2d/0x90
 get_signal+0x9df/0x9e0
 ? preempt_count_add+0x56/0xa0
 ? __remove_hrtimer+0x35/0x70
 arch_do_signal_or_restart+0x36/0x720
 ? nanosleep_copyout+0x39/0x50
 ? do_nanosleep+0x131/0x160
 ? audit_filter_inodes+0xf5/0x120
 exit_to_user_mode_prepare+0x10f/0x1e0
 syscall_exit_to_user_mode+0x17/0x30
 do_syscall_64+0x40/0x90
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Call Trace 4:
 update_rq_clock+0x128/0x1a0
 migrate_task_rq_dl+0xec/0x310
 set_task_cpu+0x84/0x1e4
 try_to_wake_up+0x1d8/0x5c0
 wake_up_process+0x1c/0x30
 hrtimer_wakeup+0x24/0x3c
 __hrtimer_run_queues+0x114/0x270
 hrtimer_interrupt+0xe8/0x244
 arch_timer_handler_phys+0x30/0x50
 handle_percpu_devid_irq+0x88/0x140
 generic_handle_domain_irq+0x40/0x60
 gic_handle_irq+0x48/0xe0
 call_on_irq_stack+0x2c/0x60
 do_interrupt_handler+0x80/0x84

Steps to reproduce:
1. Enable CONFIG_SCHED_DEBUG when compiling the kernel
2. echo 1 > /sys/kernel/debug/clear_warn_once
   echo "WARN_DOUBLE_CLOCK" > /sys/kernel/debug/sched/features
   echo "NO_RT_PUSH_IPI" > /sys/kernel/debug/sched/features
3. Run some rt/dl tasks that periodically work and sleep, e.g.
Create 2*n rt or dl (90% running) tasks via rt-app (on a system
with n CPUs), and Dietmar Eggemann reports Call Trace 4 when running
on PREEMPT_RT kernel.

Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20220430085843.62939-2-jiahao.os@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c     |  6 +++---
 kernel/sched/deadline.c |  5 +++--
 kernel/sched/rt.c       |  5 +++--
 kernel/sched/sched.h    | 28 ++++++++++++++++++++++++----
 4 files changed, 33 insertions(+), 11 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 779f3198b17d..838623b68031 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -531,10 +531,10 @@ void double_rq_lock(struct rq *rq1, struct rq *rq2)
 		swap(rq1, rq2);
 
 	raw_spin_rq_lock(rq1);
-	if (__rq_lockp(rq1) == __rq_lockp(rq2))
-		return;
+	if (__rq_lockp(rq1) != __rq_lockp(rq2))
+		raw_spin_rq_lock_nested(rq2, SINGLE_DEPTH_NESTING);
 
-	raw_spin_rq_lock_nested(rq2, SINGLE_DEPTH_NESTING);
+	double_rq_clock_clear_update(rq1, rq2);
 }
 #endif
 
diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
index 1f811b375bf0..fffcb1aa77b7 100644
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -1720,6 +1720,7 @@ select_task_rq_dl(struct task_struct *p, int cpu, int flags)
 
 static void migrate_task_rq_dl(struct task_struct *p, int new_cpu __maybe_unused)
 {
+	struct rq_flags rf;
 	struct rq *rq;
 
 	if (READ_ONCE(p->__state) != TASK_WAKING)
@@ -1731,7 +1732,7 @@ static void migrate_task_rq_dl(struct task_struct *p, int new_cpu __maybe_unused
 	 * from try_to_wake_up(). Hence, p->pi_lock is locked, but
 	 * rq->lock is not... So, lock it
 	 */
-	raw_spin_rq_lock(rq);
+	rq_lock(rq, &rf);
 	if (p->dl.dl_non_contending) {
 		update_rq_clock(rq);
 		sub_running_bw(&p->dl, &rq->dl);
@@ -1747,7 +1748,7 @@ static void migrate_task_rq_dl(struct task_struct *p, int new_cpu __maybe_unused
 			put_task_struct(p);
 	}
 	sub_rq_bw(&p->dl, &rq->dl);
-	raw_spin_rq_unlock(rq);
+	rq_unlock(rq, &rf);
 }
 
 static void check_preempt_equal_dl(struct rq *rq, struct task_struct *p)
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index 2758cf5f7987..8007d087a57f 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -885,6 +885,7 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun)
 		int enqueue = 0;
 		struct rt_rq *rt_rq = sched_rt_period_rt_rq(rt_b, i);
 		struct rq *rq = rq_of_rt_rq(rt_rq);
+		struct rq_flags rf;
 		int skip;
 
 		/*
@@ -899,7 +900,7 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun)
 		if (skip)
 			continue;
 
-		raw_spin_rq_lock(rq);
+		rq_lock(rq, &rf);
 		update_rq_clock(rq);
 
 		if (rt_rq->rt_time) {
@@ -937,7 +938,7 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun)
 
 		if (enqueue)
 			sched_rt_rq_enqueue(rt_rq);
-		raw_spin_rq_unlock(rq);
+		rq_unlock(rq, &rf);
 	}
 
 	if (!throttled && (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF))
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 4f432826933d..d30dc55e6cee 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -2489,6 +2489,24 @@ unsigned long arch_scale_freq_capacity(int cpu)
 }
 #endif
 
+#ifdef CONFIG_SCHED_DEBUG
+/*
+ * In double_lock_balance()/double_rq_lock(), we use raw_spin_rq_lock() to
+ * acquire rq lock instead of rq_lock(). So at the end of these two functions
+ * we need to call double_rq_clock_clear_update() to clear RQCF_UPDATED of
+ * rq->clock_update_flags to avoid the WARN_DOUBLE_CLOCK warning.
+ */
+static inline void double_rq_clock_clear_update(struct rq *rq1, struct rq *rq2)
+{
+	rq1->clock_update_flags &= (RQCF_REQ_SKIP|RQCF_ACT_SKIP);
+	/* rq1 == rq2 for !CONFIG_SMP, so just clear RQCF_UPDATED once. */
+#ifdef CONFIG_SMP
+	rq2->clock_update_flags &= (RQCF_REQ_SKIP|RQCF_ACT_SKIP);
+#endif
+}
+#else
+static inline void double_rq_clock_clear_update(struct rq *rq1, struct rq *rq2) {}
+#endif
 
 #ifdef CONFIG_SMP
 
@@ -2554,14 +2572,15 @@ static inline int _double_lock_balance(struct rq *this_rq, struct rq *busiest)
 	__acquires(busiest->lock)
 	__acquires(this_rq->lock)
 {
-	if (__rq_lockp(this_rq) == __rq_lockp(busiest))
-		return 0;
-
-	if (likely(raw_spin_rq_trylock(busiest)))
+	if (__rq_lockp(this_rq) == __rq_lockp(busiest) ||
+	    likely(raw_spin_rq_trylock(busiest))) {
+		double_rq_clock_clear_update(this_rq, busiest);
 		return 0;
+	}
 
 	if (rq_order_less(this_rq, busiest)) {
 		raw_spin_rq_lock_nested(busiest, SINGLE_DEPTH_NESTING);
+		double_rq_clock_clear_update(this_rq, busiest);
 		return 0;
 	}
 
@@ -2655,6 +2674,7 @@ static inline void double_rq_lock(struct rq *rq1, struct rq *rq2)
 	BUG_ON(rq1 != rq2);
 	raw_spin_rq_lock(rq1);
 	__acquire(rq2->lock);	/* Fake it out ;) */
+	double_rq_clock_clear_update(rq1, rq2);
 }
 
 /*
-- 
2.35.1

[PATCH AUTOSEL 5.15 068/109] spi: stm32-qspi: Fix wait_cmd timeout in APM mode

[Sasha Levin]

From: Patrice Chotard <patrice.chotard@foss.st.com>

[ Upstream commit d83d89ea68b4726700fa87b22db075e4217e691c ]

In APM mode, TCF and TEF flags are not set. To avoid timeout in
stm32_qspi_wait_cmd(), don't check if TCF/TEF are set.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reported-by: eberhard.stoll@kontron.de
Link: https://lore.kernel.org/r/20220511074644.558874-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32-qspi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index ffdc55f87e82..dd38cb8ffbc2 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -308,7 +308,8 @@ static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi,
 	if (!op->data.nbytes)
 		goto wait_nobusy;
 
-	if (readl_relaxed(qspi->io_base + QSPI_SR) & SR_TCF)
+	if ((readl_relaxed(qspi->io_base + QSPI_SR) & SR_TCF) ||
+	    qspi->fmode == CCR_FMODE_APM)
 		goto out;
 
 	reinit_completion(&qspi->data_completion);
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 068/109] spi: stm32-qspi: Fix wait_cmd timeout in APM mode

[Sasha Levin]

From: Patrice Chotard <patrice.chotard@foss.st.com>

[ Upstream commit d83d89ea68b4726700fa87b22db075e4217e691c ]

In APM mode, TCF and TEF flags are not set. To avoid timeout in
stm32_qspi_wait_cmd(), don't check if TCF/TEF are set.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reported-by: eberhard.stoll@kontron.de
Link: https://lore.kernel.org/r/20220511074644.558874-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32-qspi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index ffdc55f87e82..dd38cb8ffbc2 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -308,7 +308,8 @@ static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi,
 	if (!op->data.nbytes)
 		goto wait_nobusy;
 
-	if (readl_relaxed(qspi->io_base + QSPI_SR) & SR_TCF)
+	if ((readl_relaxed(qspi->io_base + QSPI_SR) & SR_TCF) ||
+	    qspi->fmode == CCR_FMODE_APM)
 		goto out;
 
 	reinit_completion(&qspi->data_completion);
-- 
2.35.1

[PATCH AUTOSEL 5.15 069/109] dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC

[Sasha Levin]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit 84bc4f1dbbbb5f8aa68706a96711dccb28b518e5 ]

We observed the error "cacheline tracking ENOMEM, dma-debug disabled"
during a light system load (copying some files). The reason for this error
is that the dma_active_cacheline radix tree uses GFP_NOWAIT allocation -
so it can't access the emergency memory reserves and it fails as soon as
anybody reaches the watermark.

This patch changes GFP_NOWAIT to GFP_ATOMIC, so that it can access the
emergency memory reserves.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/dma/debug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c
index f8ff598596b8..ac740630c79c 100644
--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -448,7 +448,7 @@ void debug_dma_dump_mappings(struct device *dev)
  * other hand, consumes a single dma_debug_entry, but inserts 'nents'
  * entries into the tree.
  */
-static RADIX_TREE(dma_active_cacheline, GFP_NOWAIT);
+static RADIX_TREE(dma_active_cacheline, GFP_ATOMIC);
 static DEFINE_SPINLOCK(radix_lock);
 #define ACTIVE_CACHELINE_MAX_OVERLAP ((1 << RADIX_TREE_MAX_TAGS) - 1)
 #define CACHELINE_PER_PAGE_SHIFT (PAGE_SHIFT - L1_CACHE_SHIFT)
-- 
2.35.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH AUTOSEL 5.15 069/109] dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC

[Sasha Levin]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit 84bc4f1dbbbb5f8aa68706a96711dccb28b518e5 ]

We observed the error "cacheline tracking ENOMEM, dma-debug disabled"
during a light system load (copying some files). The reason for this error
is that the dma_active_cacheline radix tree uses GFP_NOWAIT allocation -
so it can't access the emergency memory reserves and it fails as soon as
anybody reaches the watermark.

This patch changes GFP_NOWAIT to GFP_ATOMIC, so that it can access the
emergency memory reserves.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/dma/debug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c
index f8ff598596b8..ac740630c79c 100644
--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -448,7 +448,7 @@ void debug_dma_dump_mappings(struct device *dev)
  * other hand, consumes a single dma_debug_entry, but inserts 'nents'
  * entries into the tree.
  */
-static RADIX_TREE(dma_active_cacheline, GFP_NOWAIT);
+static RADIX_TREE(dma_active_cacheline, GFP_ATOMIC);
 static DEFINE_SPINLOCK(radix_lock);
 #define ACTIVE_CACHELINE_MAX_OVERLAP ((1 << RADIX_TREE_MAX_TAGS) - 1)
 #define CACHELINE_PER_PAGE_SHIFT (PAGE_SHIFT - L1_CACHE_SHIFT)
-- 
2.35.1

[PATCH AUTOSEL 5.15 070/109] ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit d52848620de00cde4a3a5df908e231b8c8868250 ]

ASUS B1400CEAE fails to resume from suspend to idle by default.  This was
bisected back to commit df4f9bc4fb9c ("nvme-pci: add support for ACPI
StorageD3Enable property") but this is a red herring to the problem.

Before this commit the system wasn't getting into deepest sleep state.
Presumably this commit is allowing entry into deepest sleep state as
advertised by firmware, but there are some other problems related to
the wakeup.

As it is confirmed the system works properly with S3, set the default for
this system to S3.

Reported-by: Jian-Hong Pan <jhp@endlessos.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/sleep.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 7ae09e4b4592..07515139141e 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -374,6 +374,18 @@ static const struct dmi_system_id acpisleep_dmi_table[] __initconst = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "20GGA00L00"),
 		},
 	},
+	/*
+	 * ASUS B1400CEAE hangs on resume from suspend (see
+	 * https://bugzilla.kernel.org/show_bug.cgi?id=215742).
+	 */
+	{
+	.callback = init_default_s3,
+	.ident = "ASUS B1400CEAE",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "ASUS EXPERTBOOK B1400CEAE"),
+		},
+	},
 	{},
 };
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 071/109] ipmi:ssif: Check for NULL msg when handling events and messages

[Sasha Levin]

From: Corey Minyard <cminyard@mvista.com>

[ Upstream commit 7602b957e2404e5f98d9a40b68f1fd27f0028712 ]

Even though it's not possible to get into the SSIF_GETTING_MESSAGES and
SSIF_GETTING_EVENTS states without a valid message in the msg field,
it's probably best to be defensive here and check and print a log, since
that means something else went wrong.

Also add a default clause to that switch statement to release the lock
and print a log, in case the state variable gets messed up somehow.

Reported-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_ssif.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index 8d7a8898e80b..f366e8e3eee3 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -814,6 +814,14 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 		break;
 
 	case SSIF_GETTING_EVENTS:
+		if (!msg) {
+			/* Should never happen, but just in case. */
+			dev_warn(&ssif_info->client->dev,
+				 "No message set while getting events\n");
+			ipmi_ssif_unlock_cond(ssif_info, flags);
+			break;
+		}
+
 		if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) {
 			/* Error getting event, probably done. */
 			msg->done(msg);
@@ -838,6 +846,14 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 		break;
 
 	case SSIF_GETTING_MESSAGES:
+		if (!msg) {
+			/* Should never happen, but just in case. */
+			dev_warn(&ssif_info->client->dev,
+				 "No message set while getting messages\n");
+			ipmi_ssif_unlock_cond(ssif_info, flags);
+			break;
+		}
+
 		if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) {
 			/* Error getting event, probably done. */
 			msg->done(msg);
@@ -861,6 +877,13 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 			deliver_recv_msg(ssif_info, msg);
 		}
 		break;
+
+	default:
+		/* Should never happen, but just in case. */
+		dev_warn(&ssif_info->client->dev,
+			 "Invalid state in message done handling: %d\n",
+			 ssif_info->ssif_state);
+		ipmi_ssif_unlock_cond(ssif_info, flags);
 	}
 
 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
-- 
2.35.1

[PATCH AUTOSEL 5.15 072/109] ipmi: Fix pr_fmt to avoid compilation issues

[Sasha Levin]

From: Corey Minyard <cminyard@mvista.com>

[ Upstream commit 2ebaf18a0b7fb764bba6c806af99fe868cee93de ]

The was it was wouldn't work in some situations, simplify it.  What was
there was unnecessary complexity.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_msghandler.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index fe91090e04a4..2badf36d4816 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -11,8 +11,8 @@
  * Copyright 2002 MontaVista Software Inc.
  */
 
-#define pr_fmt(fmt) "%s" fmt, "IPMI message handler: "
-#define dev_fmt pr_fmt
+#define pr_fmt(fmt) "IPMI message handler: " fmt
+#define dev_fmt(fmt) pr_fmt(fmt)
 
 #include <linux/module.h>
 #include <linux/errno.h>
-- 
2.35.1

[PATCH AUTOSEL 5.15 073/109] rtlwifi: Use pr_warn instead of WARN_ONCE

[Sasha Levin]

From: Dongliang Mu <mudongliangabcd@gmail.com>

[ Upstream commit ad732da434a2936128769216eddaece3b1af4588 ]

This memory allocation failure can be triggered by fault injection or
high pressure testing, resulting a WARN.

Fix this by replacing WARN with pr_warn.

Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220511014453.1621366-1-dzm91@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index 86a236873254..a8eebafb9a7e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1014,7 +1014,7 @@ int rtl_usb_probe(struct usb_interface *intf,
 	hw = ieee80211_alloc_hw(sizeof(struct rtl_priv) +
 				sizeof(struct rtl_usb_priv), &rtl_ops);
 	if (!hw) {
-		WARN_ONCE(true, "rtl_usb: ieee80211 alloc failed\n");
+		pr_warn("rtl_usb: ieee80211 alloc failed\n");
 		return -ENOMEM;
 	}
 	rtlpriv = hw->priv;
-- 
2.35.1

[PATCH AUTOSEL 5.15 074/109] mt76: mt7921: accept rx frames with non-standard VHT MCS10-11

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 3128ea016965ce9f91ddf4e1dd944724462d1698 ]

The hardware receives them properly, they should not be dropped

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index c093920a597d..5024ddf07cbc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -563,7 +563,7 @@ int mt7921_mac_fill_rx(struct mt7921_dev *dev, struct sk_buff *skb)
 			status->nss =
 				FIELD_GET(MT_PRXV_NSTS, v0) + 1;
 			status->encoding = RX_ENC_VHT;
-			if (i > 9)
+			if (i > 11)
 				return -EINVAL;
 			break;
 		case MT_PHY_TYPE_HE_MU:
-- 
2.35.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.15 074/109] mt76: mt7921: accept rx frames with non-standard VHT MCS10-11

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 3128ea016965ce9f91ddf4e1dd944724462d1698 ]

The hardware receives them properly, they should not be dropped

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index c093920a597d..5024ddf07cbc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -563,7 +563,7 @@ int mt7921_mac_fill_rx(struct mt7921_dev *dev, struct sk_buff *skb)
 			status->nss =
 				FIELD_GET(MT_PRXV_NSTS, v0) + 1;
 			status->encoding = RX_ENC_VHT;
-			if (i > 9)
+			if (i > 11)
 				return -EINVAL;
 			break;
 		case MT_PHY_TYPE_HE_MU:
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 074/109] mt76: mt7921: accept rx frames with non-standard VHT MCS10-11

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 3128ea016965ce9f91ddf4e1dd944724462d1698 ]

The hardware receives them properly, they should not be dropped

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index c093920a597d..5024ddf07cbc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -563,7 +563,7 @@ int mt7921_mac_fill_rx(struct mt7921_dev *dev, struct sk_buff *skb)
 			status->nss =
 				FIELD_GET(MT_PRXV_NSTS, v0) + 1;
 			status->encoding = RX_ENC_VHT;
-			if (i > 9)
+			if (i > 11)
 				return -EINVAL;
 			break;
 		case MT_PHY_TYPE_HE_MU:
-- 
2.35.1

[PATCH AUTOSEL 5.15 075/109] mt76: fix encap offload ethernet type check

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit bc98e7fdd80d215b4b55eea001023231eb8ce12e ]

The driver needs to check if the format is 802.2 vs 802.3 in order to set
a tx descriptor flag. skb->protocol can't be used, since it may not be properly
initialized for packets coming in from a packet socket.
Fix misdetection by checking the ethertype from the skb data instead

Reported-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 4 +++-
 drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index 7691292526e0..a8a0e6af51f8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -799,6 +799,7 @@ mt7915_mac_write_txwi_8023(struct mt7915_dev *dev, __le32 *txwi,
 
 	u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
 	u8 fc_type, fc_stype;
+	u16 ethertype;
 	bool wmm = false;
 	u32 val;
 
@@ -812,7 +813,8 @@ mt7915_mac_write_txwi_8023(struct mt7915_dev *dev, __le32 *txwi,
 	val = FIELD_PREP(MT_TXD1_HDR_FORMAT, MT_HDR_FORMAT_802_3) |
 	      FIELD_PREP(MT_TXD1_TID, tid);
 
-	if (be16_to_cpu(skb->protocol) >= ETH_P_802_3_MIN)
+	ethertype = get_unaligned_be16(&skb->data[12]);
+	if (ethertype >= ETH_P_802_3_MIN)
 		val |= MT_TXD1_ETH_802_3;
 
 	txwi[1] |= cpu_to_le32(val);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index 5024ddf07cbc..bef8d4a76ed9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -681,6 +681,7 @@ mt7921_mac_write_txwi_8023(struct mt7921_dev *dev, __le32 *txwi,
 {
 	u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
 	u8 fc_type, fc_stype;
+	u16 ethertype;
 	bool wmm = false;
 	u32 val;
 
@@ -694,7 +695,8 @@ mt7921_mac_write_txwi_8023(struct mt7921_dev *dev, __le32 *txwi,
 	val = FIELD_PREP(MT_TXD1_HDR_FORMAT, MT_HDR_FORMAT_802_3) |
 	      FIELD_PREP(MT_TXD1_TID, tid);
 
-	if (be16_to_cpu(skb->protocol) >= ETH_P_802_3_MIN)
+	ethertype = get_unaligned_be16(&skb->data[12]);
+	if (ethertype >= ETH_P_802_3_MIN)
 		val |= MT_TXD1_ETH_802_3;
 
 	txwi[1] |= cpu_to_le32(val);
-- 
2.35.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.15 075/109] mt76: fix encap offload ethernet type check

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit bc98e7fdd80d215b4b55eea001023231eb8ce12e ]

The driver needs to check if the format is 802.2 vs 802.3 in order to set
a tx descriptor flag. skb->protocol can't be used, since it may not be properly
initialized for packets coming in from a packet socket.
Fix misdetection by checking the ethertype from the skb data instead

Reported-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 4 +++-
 drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index 7691292526e0..a8a0e6af51f8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -799,6 +799,7 @@ mt7915_mac_write_txwi_8023(struct mt7915_dev *dev, __le32 *txwi,
 
 	u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
 	u8 fc_type, fc_stype;
+	u16 ethertype;
 	bool wmm = false;
 	u32 val;
 
@@ -812,7 +813,8 @@ mt7915_mac_write_txwi_8023(struct mt7915_dev *dev, __le32 *txwi,
 	val = FIELD_PREP(MT_TXD1_HDR_FORMAT, MT_HDR_FORMAT_802_3) |
 	      FIELD_PREP(MT_TXD1_TID, tid);
 
-	if (be16_to_cpu(skb->protocol) >= ETH_P_802_3_MIN)
+	ethertype = get_unaligned_be16(&skb->data[12]);
+	if (ethertype >= ETH_P_802_3_MIN)
 		val |= MT_TXD1_ETH_802_3;
 
 	txwi[1] |= cpu_to_le32(val);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index 5024ddf07cbc..bef8d4a76ed9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -681,6 +681,7 @@ mt7921_mac_write_txwi_8023(struct mt7921_dev *dev, __le32 *txwi,
 {
 	u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
 	u8 fc_type, fc_stype;
+	u16 ethertype;
 	bool wmm = false;
 	u32 val;
 
@@ -694,7 +695,8 @@ mt7921_mac_write_txwi_8023(struct mt7921_dev *dev, __le32 *txwi,
 	val = FIELD_PREP(MT_TXD1_HDR_FORMAT, MT_HDR_FORMAT_802_3) |
 	      FIELD_PREP(MT_TXD1_TID, tid);
 
-	if (be16_to_cpu(skb->protocol) >= ETH_P_802_3_MIN)
+	ethertype = get_unaligned_be16(&skb->data[12]);
+	if (ethertype >= ETH_P_802_3_MIN)
 		val |= MT_TXD1_ETH_802_3;
 
 	txwi[1] |= cpu_to_le32(val);
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 075/109] mt76: fix encap offload ethernet type check

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit bc98e7fdd80d215b4b55eea001023231eb8ce12e ]

The driver needs to check if the format is 802.2 vs 802.3 in order to set
a tx descriptor flag. skb->protocol can't be used, since it may not be properly
initialized for packets coming in from a packet socket.
Fix misdetection by checking the ethertype from the skb data instead

Reported-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 4 +++-
 drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index 7691292526e0..a8a0e6af51f8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -799,6 +799,7 @@ mt7915_mac_write_txwi_8023(struct mt7915_dev *dev, __le32 *txwi,
 
 	u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
 	u8 fc_type, fc_stype;
+	u16 ethertype;
 	bool wmm = false;
 	u32 val;
 
@@ -812,7 +813,8 @@ mt7915_mac_write_txwi_8023(struct mt7915_dev *dev, __le32 *txwi,
 	val = FIELD_PREP(MT_TXD1_HDR_FORMAT, MT_HDR_FORMAT_802_3) |
 	      FIELD_PREP(MT_TXD1_TID, tid);
 
-	if (be16_to_cpu(skb->protocol) >= ETH_P_802_3_MIN)
+	ethertype = get_unaligned_be16(&skb->data[12]);
+	if (ethertype >= ETH_P_802_3_MIN)
 		val |= MT_TXD1_ETH_802_3;
 
 	txwi[1] |= cpu_to_le32(val);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index 5024ddf07cbc..bef8d4a76ed9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -681,6 +681,7 @@ mt7921_mac_write_txwi_8023(struct mt7921_dev *dev, __le32 *txwi,
 {
 	u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
 	u8 fc_type, fc_stype;
+	u16 ethertype;
 	bool wmm = false;
 	u32 val;
 
@@ -694,7 +695,8 @@ mt7921_mac_write_txwi_8023(struct mt7921_dev *dev, __le32 *txwi,
 	val = FIELD_PREP(MT_TXD1_HDR_FORMAT, MT_HDR_FORMAT_802_3) |
 	      FIELD_PREP(MT_TXD1_TID, tid);
 
-	if (be16_to_cpu(skb->protocol) >= ETH_P_802_3_MIN)
+	ethertype = get_unaligned_be16(&skb->data[12]);
+	if (ethertype >= ETH_P_802_3_MIN)
 		val |= MT_TXD1_ETH_802_3;
 
 	txwi[1] |= cpu_to_le32(val);
-- 
2.35.1

[PATCH AUTOSEL 5.15 076/109] media: rga: fix possible memory leak in rga_probe

[Sasha Levin]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit a71eb6025305192e646040cd76ccacb5bd48a1b5 ]

rga->m2m_dev needs to be freed when rga_probe fails.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/rockchip/rga/rga.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
index d99ea8973b67..e3246344fb72 100644
--- a/drivers/media/platform/rockchip/rga/rga.c
+++ b/drivers/media/platform/rockchip/rga/rga.c
@@ -868,7 +868,7 @@ static int rga_probe(struct platform_device *pdev)
 
 	ret = pm_runtime_resume_and_get(rga->dev);
 	if (ret < 0)
-		goto rel_vdev;
+		goto rel_m2m;
 
 	rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
 	rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;
@@ -884,7 +884,7 @@ static int rga_probe(struct platform_device *pdev)
 					   DMA_ATTR_WRITE_COMBINE);
 	if (!rga->cmdbuf_virt) {
 		ret = -ENOMEM;
-		goto rel_vdev;
+		goto rel_m2m;
 	}
 
 	rga->src_mmu_pages =
@@ -921,6 +921,8 @@ static int rga_probe(struct platform_device *pdev)
 free_dma:
 	dma_free_attrs(rga->dev, RGA_CMDBUF_SIZE, rga->cmdbuf_virt,
 		       rga->cmdbuf_phy, DMA_ATTR_WRITE_COMBINE);
+rel_m2m:
+	v4l2_m2m_release(rga->m2m_dev);
 rel_vdev:
 	video_device_release(vfd);
 unreg_v4l2_dev:
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 5.15 076/109] media: rga: fix possible memory leak in rga_probe

[Sasha Levin]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit a71eb6025305192e646040cd76ccacb5bd48a1b5 ]

rga->m2m_dev needs to be freed when rga_probe fails.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/rockchip/rga/rga.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
index d99ea8973b67..e3246344fb72 100644
--- a/drivers/media/platform/rockchip/rga/rga.c
+++ b/drivers/media/platform/rockchip/rga/rga.c
@@ -868,7 +868,7 @@ static int rga_probe(struct platform_device *pdev)
 
 	ret = pm_runtime_resume_and_get(rga->dev);
 	if (ret < 0)
-		goto rel_vdev;
+		goto rel_m2m;
 
 	rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
 	rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;
@@ -884,7 +884,7 @@ static int rga_probe(struct platform_device *pdev)
 					   DMA_ATTR_WRITE_COMBINE);
 	if (!rga->cmdbuf_virt) {
 		ret = -ENOMEM;
-		goto rel_vdev;
+		goto rel_m2m;
 	}
 
 	rga->src_mmu_pages =
@@ -921,6 +921,8 @@ static int rga_probe(struct platform_device *pdev)
 free_dma:
 	dma_free_attrs(rga->dev, RGA_CMDBUF_SIZE, rga->cmdbuf_virt,
 		       rga->cmdbuf_phy, DMA_ATTR_WRITE_COMBINE);
+rel_m2m:
+	v4l2_m2m_release(rga->m2m_dev);
 rel_vdev:
 	video_device_release(vfd);
 unreg_v4l2_dev:
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 076/109] media: rga: fix possible memory leak in rga_probe

[Sasha Levin]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit a71eb6025305192e646040cd76ccacb5bd48a1b5 ]

rga->m2m_dev needs to be freed when rga_probe fails.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/rockchip/rga/rga.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
index d99ea8973b67..e3246344fb72 100644
--- a/drivers/media/platform/rockchip/rga/rga.c
+++ b/drivers/media/platform/rockchip/rga/rga.c
@@ -868,7 +868,7 @@ static int rga_probe(struct platform_device *pdev)
 
 	ret = pm_runtime_resume_and_get(rga->dev);
 	if (ret < 0)
-		goto rel_vdev;
+		goto rel_m2m;
 
 	rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
 	rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;
@@ -884,7 +884,7 @@ static int rga_probe(struct platform_device *pdev)
 					   DMA_ATTR_WRITE_COMBINE);
 	if (!rga->cmdbuf_virt) {
 		ret = -ENOMEM;
-		goto rel_vdev;
+		goto rel_m2m;
 	}
 
 	rga->src_mmu_pages =
@@ -921,6 +921,8 @@ static int rga_probe(struct platform_device *pdev)
 free_dma:
 	dma_free_attrs(rga->dev, RGA_CMDBUF_SIZE, rga->cmdbuf_virt,
 		       rga->cmdbuf_phy, DMA_ATTR_WRITE_COMBINE);
+rel_m2m:
+	v4l2_m2m_release(rga->m2m_dev);
 rel_vdev:
 	video_device_release(vfd);
 unreg_v4l2_dev:
-- 
2.35.1

[PATCH AUTOSEL 5.15 077/109] media: coda: limit frame interval enumeration to supported encoder frame sizes

[Sasha Levin]

From: Philipp Zabel <p.zabel@pengutronix.de>

[ Upstream commit 67e33dd957880879e785cfea83a3aa24bd5c5577 ]

Let VIDIOC_ENUM_FRAMEINTERVALS return -EINVAL if userspace queries
frame intervals for frame sizes unsupported by the encoder. Fixes the
following v4l2-compliance failure:

		fail: v4l2-test-formats.cpp(123): found frame intervals for invalid size 47x16
		fail: v4l2-test-formats.cpp(282): node->codec_mask & STATEFUL_ENCODER
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL

[hverkuil: drop incorrect 'For decoder devices, return -ENOTTY.' in the commit log]

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/coda/coda-common.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c
index 4a553f42ff0a..befc9db16c86 100644
--- a/drivers/media/platform/coda/coda-common.c
+++ b/drivers/media/platform/coda/coda-common.c
@@ -1318,7 +1318,8 @@ static int coda_enum_frameintervals(struct file *file, void *fh,
 				    struct v4l2_frmivalenum *f)
 {
 	struct coda_ctx *ctx = fh_to_ctx(fh);
-	int i;
+	struct coda_q_data *q_data;
+	const struct coda_codec *codec;
 
 	if (f->index)
 		return -EINVAL;
@@ -1327,12 +1328,19 @@ static int coda_enum_frameintervals(struct file *file, void *fh,
 	if (!ctx->vdoa && f->pixel_format == V4L2_PIX_FMT_YUYV)
 		return -EINVAL;
 
-	for (i = 0; i < CODA_MAX_FORMATS; i++) {
-		if (f->pixel_format == ctx->cvd->src_formats[i] ||
-		    f->pixel_format == ctx->cvd->dst_formats[i])
-			break;
+	if (coda_format_normalize_yuv(f->pixel_format) == V4L2_PIX_FMT_YUV420) {
+		q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+		codec = coda_find_codec(ctx->dev, f->pixel_format,
+					q_data->fourcc);
+	} else {
+		codec = coda_find_codec(ctx->dev, V4L2_PIX_FMT_YUV420,
+					f->pixel_format);
 	}
-	if (i == CODA_MAX_FORMATS)
+	if (!codec)
+		return -EINVAL;
+
+	if (f->width < MIN_W || f->width > codec->max_w ||
+	    f->height < MIN_H || f->height > codec->max_h)
 		return -EINVAL;
 
 	f->type = V4L2_FRMIVAL_TYPE_CONTINUOUS;
-- 
2.35.1

[PATCH AUTOSEL 5.15 078/109] media: hantro: HEVC: unconditionnaly set pps_{cb/cr}_qp_offset values

[Sasha Levin]

From: Benjamin Gaignard <benjamin.gaignard@collabora.com>

[ Upstream commit 46c836569196f377f87a3657b330cffaf94bd727 ]

Always set pps_cb_qp_offset and pps_cr_qp_offset values in Hantro/G2
register whatever is V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT
flag value.
The vendor code does the same to set these values.
This fixes conformance test CAINIT_G_SHARP_3.

Fluster HEVC score is increase by one with this patch.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/hantro/hantro_g2_hevc_dec.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
index 340efb57fd18..ee069564205a 100644
--- a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
+++ b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
@@ -194,13 +194,8 @@ static void set_params(struct hantro_ctx *ctx)
 		hantro_reg_write(vpu, &g2_max_cu_qpd_depth, 0);
 	}
 
-	if (pps->flags & V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT) {
-		hantro_reg_write(vpu, &g2_cb_qp_offset, pps->pps_cb_qp_offset);
-		hantro_reg_write(vpu, &g2_cr_qp_offset, pps->pps_cr_qp_offset);
-	} else {
-		hantro_reg_write(vpu, &g2_cb_qp_offset, 0);
-		hantro_reg_write(vpu, &g2_cr_qp_offset, 0);
-	}
+	hantro_reg_write(vpu, &g2_cb_qp_offset, pps->pps_cb_qp_offset);
+	hantro_reg_write(vpu, &g2_cr_qp_offset, pps->pps_cr_qp_offset);
 
 	hantro_reg_write(vpu, &g2_filt_offset_beta, pps->pps_beta_offset_div2);
 	hantro_reg_write(vpu, &g2_filt_offset_tc, pps->pps_tc_offset_div2);
-- 
2.35.1

[PATCH AUTOSEL 5.15 078/109] media: hantro: HEVC: unconditionnaly set pps_{cb/cr}_qp_offset values

[Sasha Levin]

From: Benjamin Gaignard <benjamin.gaignard@collabora.com>

[ Upstream commit 46c836569196f377f87a3657b330cffaf94bd727 ]

Always set pps_cb_qp_offset and pps_cr_qp_offset values in Hantro/G2
register whatever is V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT
flag value.
The vendor code does the same to set these values.
This fixes conformance test CAINIT_G_SHARP_3.

Fluster HEVC score is increase by one with this patch.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/hantro/hantro_g2_hevc_dec.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
index 340efb57fd18..ee069564205a 100644
--- a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
+++ b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
@@ -194,13 +194,8 @@ static void set_params(struct hantro_ctx *ctx)
 		hantro_reg_write(vpu, &g2_max_cu_qpd_depth, 0);
 	}
 
-	if (pps->flags & V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT) {
-		hantro_reg_write(vpu, &g2_cb_qp_offset, pps->pps_cb_qp_offset);
-		hantro_reg_write(vpu, &g2_cr_qp_offset, pps->pps_cr_qp_offset);
-	} else {
-		hantro_reg_write(vpu, &g2_cb_qp_offset, 0);
-		hantro_reg_write(vpu, &g2_cr_qp_offset, 0);
-	}
+	hantro_reg_write(vpu, &g2_cb_qp_offset, pps->pps_cb_qp_offset);
+	hantro_reg_write(vpu, &g2_cr_qp_offset, pps->pps_cr_qp_offset);
 
 	hantro_reg_write(vpu, &g2_filt_offset_beta, pps->pps_beta_offset_div2);
 	hantro_reg_write(vpu, &g2_filt_offset_tc, pps->pps_tc_offset_div2);
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 5.15 079/109] media: ccs-core.c: fix failure to call clk_disable_unprepare

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit eca89cf60b040ee2cae693ea72a0364284f3084c ]

Fixes smatch warning:

drivers/media/i2c/ccs/ccs-core.c:1676 ccs_power_on() warn: 'sensor->ext_clk' from clk_prepare_enable() not released on lines: 1606.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ccs/ccs-core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
index 5363f3bcafe3..67bb770ed63f 100644
--- a/drivers/media/i2c/ccs/ccs-core.c
+++ b/drivers/media/i2c/ccs/ccs-core.c
@@ -1603,8 +1603,11 @@ static int ccs_power_on(struct device *dev)
 			usleep_range(1000, 2000);
 		} while (--retry);
 
-		if (!reset)
-			return -EIO;
+		if (!reset) {
+			dev_err(dev, "software reset failed\n");
+			rval = -EIO;
+			goto out_cci_addr_fail;
+		}
 	}
 
 	if (sensor->hwcfg.i2c_addr_alt) {
-- 
2.35.1

[PATCH AUTOSEL 5.15 080/109] media: imon: reorganize serialization

[Sasha Levin]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit db264d4c66c0fe007b5d19fd007707cd0697603d ]

Since usb_register_dev() from imon_init_display() from imon_probe() holds
minor_rwsem while display_open() which holds driver_lock and ictx->lock is
called with minor_rwsem held from usb_open(), holding driver_lock or
ictx->lock when calling usb_register_dev() causes circular locking
dependency problem.

Since usb_deregister_dev() from imon_disconnect() holds minor_rwsem while
display_open() which holds driver_lock is called with minor_rwsem held,
holding driver_lock when calling usb_deregister_dev() also causes circular
locking dependency problem.

Sean Young explained that the problem is there are imon devices which have
two usb interfaces, even though it is one device. The probe and disconnect
function of both usb interfaces can run concurrently.

Alan Stern responded that the driver and USB cores guarantee that when an
interface is probed, both the interface and its USB device are locked.
Ditto for when the disconnect callback gets run. So concurrent probing/
disconnection of multiple interfaces on the same device is not possible.

Therefore, we don't need locks for handling race between imon_probe() and
imon_disconnect(). But we still need to handle race between display_open()
/vfd_write()/lcd_write()/display_close() and imon_disconnect(), for
disconnect event can happen while file descriptors are in use.

Since "struct file"->private_data is set by display_open(), vfd_write()/
lcd_write()/display_close() can assume that "struct file"->private_data
is not NULL even after usb_set_intfdata(interface, NULL) was called.

Replace insufficiently held driver_lock with refcount_t based management.
Add a boolean flag for recording whether imon_disconnect() was already
called. Use RCU for accessing this boolean flag and refcount_t.

Since the boolean flag for imon_disconnect() is shared, disconnect event
on either intf0 or intf1 affects both interfaces. But I assume that this
change does not matter, for usually disconnect event would not happen
while interfaces are in use.

Link: https://syzkaller.appspot.com/bug?extid=c558267ad910fc494497

Reported-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/imon.c | 99 +++++++++++++++++++----------------------
 1 file changed, 47 insertions(+), 52 deletions(-)

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 2ca4e86c7b9f..97355e3ebdfd 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -153,6 +153,24 @@ struct imon_context {
 	const struct imon_usb_dev_descr *dev_descr;
 					/* device description with key */
 					/* table for front panels */
+	/*
+	 * Fields for deferring free_imon_context().
+	 *
+	 * Since reference to "struct imon_context" is stored into
+	 * "struct file"->private_data, we need to remember
+	 * how many file descriptors might access this "struct imon_context".
+	 */
+	refcount_t users;
+	/*
+	 * Use a flag for telling display_open()/vfd_write()/lcd_write() that
+	 * imon_disconnect() was already called.
+	 */
+	bool disconnected;
+	/*
+	 * We need to wait for RCU grace period in order to allow
+	 * display_open() to safely check ->disconnected and increment ->users.
+	 */
+	struct rcu_head rcu;
 };
 
 #define TOUCH_TIMEOUT	(HZ/30)
@@ -160,18 +178,18 @@ struct imon_context {
 /* vfd character device file operations */
 static const struct file_operations vfd_fops = {
 	.owner		= THIS_MODULE,
-	.open		= &display_open,
-	.write		= &vfd_write,
-	.release	= &display_close,
+	.open		= display_open,
+	.write		= vfd_write,
+	.release	= display_close,
 	.llseek		= noop_llseek,
 };
 
 /* lcd character device file operations */
 static const struct file_operations lcd_fops = {
 	.owner		= THIS_MODULE,
-	.open		= &display_open,
-	.write		= &lcd_write,
-	.release	= &display_close,
+	.open		= display_open,
+	.write		= lcd_write,
+	.release	= display_close,
 	.llseek		= noop_llseek,
 };
 
@@ -439,9 +457,6 @@ static struct usb_driver imon_driver = {
 	.id_table	= imon_usb_id_table,
 };
 
-/* to prevent races between open() and disconnect(), probing, etc */
-static DEFINE_MUTEX(driver_lock);
-
 /* Module bookkeeping bits */
 MODULE_AUTHOR(MOD_AUTHOR);
 MODULE_DESCRIPTION(MOD_DESC);
@@ -481,9 +496,11 @@ static void free_imon_context(struct imon_context *ictx)
 	struct device *dev = ictx->dev;
 
 	usb_free_urb(ictx->tx_urb);
+	WARN_ON(ictx->dev_present_intf0);
 	usb_free_urb(ictx->rx_urb_intf0);
+	WARN_ON(ictx->dev_present_intf1);
 	usb_free_urb(ictx->rx_urb_intf1);
-	kfree(ictx);
+	kfree_rcu(ictx, rcu);
 
 	dev_dbg(dev, "%s: iMON context freed\n", __func__);
 }
@@ -499,9 +516,6 @@ static int display_open(struct inode *inode, struct file *file)
 	int subminor;
 	int retval = 0;
 
-	/* prevent races with disconnect */
-	mutex_lock(&driver_lock);
-
 	subminor = iminor(inode);
 	interface = usb_find_interface(&imon_driver, subminor);
 	if (!interface) {
@@ -509,13 +523,16 @@ static int display_open(struct inode *inode, struct file *file)
 		retval = -ENODEV;
 		goto exit;
 	}
-	ictx = usb_get_intfdata(interface);
 
-	if (!ictx) {
+	rcu_read_lock();
+	ictx = usb_get_intfdata(interface);
+	if (!ictx || ictx->disconnected || !refcount_inc_not_zero(&ictx->users)) {
+		rcu_read_unlock();
 		pr_err("no context found for minor %d\n", subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
+	rcu_read_unlock();
 
 	mutex_lock(&ictx->lock);
 
@@ -533,8 +550,10 @@ static int display_open(struct inode *inode, struct file *file)
 
 	mutex_unlock(&ictx->lock);
 
+	if (retval && refcount_dec_and_test(&ictx->users))
+		free_imon_context(ictx);
+
 exit:
-	mutex_unlock(&driver_lock);
 	return retval;
 }
 
@@ -544,16 +563,9 @@ static int display_open(struct inode *inode, struct file *file)
  */
 static int display_close(struct inode *inode, struct file *file)
 {
-	struct imon_context *ictx = NULL;
+	struct imon_context *ictx = file->private_data;
 	int retval = 0;
 
-	ictx = file->private_data;
-
-	if (!ictx) {
-		pr_err("no context for device\n");
-		return -ENODEV;
-	}
-
 	mutex_lock(&ictx->lock);
 
 	if (!ictx->display_supported) {
@@ -568,6 +580,8 @@ static int display_close(struct inode *inode, struct file *file)
 	}
 
 	mutex_unlock(&ictx->lock);
+	if (refcount_dec_and_test(&ictx->users))
+		free_imon_context(ictx);
 	return retval;
 }
 
@@ -934,15 +948,12 @@ static ssize_t vfd_write(struct file *file, const char __user *buf,
 	int offset;
 	int seq;
 	int retval = 0;
-	struct imon_context *ictx;
+	struct imon_context *ictx = file->private_data;
 	static const unsigned char vfd_packet6[] = {
 		0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
 
-	ictx = file->private_data;
-	if (!ictx) {
-		pr_err_ratelimited("no context for device\n");
+	if (ictx->disconnected)
 		return -ENODEV;
-	}
 
 	mutex_lock(&ictx->lock);
 
@@ -1018,13 +1029,10 @@ static ssize_t lcd_write(struct file *file, const char __user *buf,
 			 size_t n_bytes, loff_t *pos)
 {
 	int retval = 0;
-	struct imon_context *ictx;
+	struct imon_context *ictx = file->private_data;
 
-	ictx = file->private_data;
-	if (!ictx) {
-		pr_err_ratelimited("no context for device\n");
+	if (ictx->disconnected)
 		return -ENODEV;
-	}
 
 	mutex_lock(&ictx->lock);
 
@@ -2402,7 +2410,6 @@ static int imon_probe(struct usb_interface *interface,
 	int ifnum, sysfs_err;
 	int ret = 0;
 	struct imon_context *ictx = NULL;
-	struct imon_context *first_if_ctx = NULL;
 	u16 vendor, product;
 
 	usbdev     = usb_get_dev(interface_to_usbdev(interface));
@@ -2414,17 +2421,12 @@ static int imon_probe(struct usb_interface *interface,
 	dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n",
 		__func__, vendor, product, ifnum);
 
-	/* prevent races probing devices w/multiple interfaces */
-	mutex_lock(&driver_lock);
-
 	first_if = usb_ifnum_to_if(usbdev, 0);
 	if (!first_if) {
 		ret = -ENODEV;
 		goto fail;
 	}
 
-	first_if_ctx = usb_get_intfdata(first_if);
-
 	if (ifnum == 0) {
 		ictx = imon_init_intf0(interface, id);
 		if (!ictx) {
@@ -2432,9 +2434,11 @@ static int imon_probe(struct usb_interface *interface,
 			ret = -ENODEV;
 			goto fail;
 		}
+		refcount_set(&ictx->users, 1);
 
 	} else {
 		/* this is the secondary interface on the device */
+		struct imon_context *first_if_ctx = usb_get_intfdata(first_if);
 
 		/* fail early if first intf failed to register */
 		if (!first_if_ctx) {
@@ -2448,14 +2452,13 @@ static int imon_probe(struct usb_interface *interface,
 			ret = -ENODEV;
 			goto fail;
 		}
+		refcount_inc(&ictx->users);
 
 	}
 
 	usb_set_intfdata(interface, ictx);
 
 	if (ifnum == 0) {
-		mutex_lock(&ictx->lock);
-
 		if (product == 0xffdc && ictx->rf_device) {
 			sysfs_err = sysfs_create_group(&interface->dev.kobj,
 						       &imon_rf_attr_group);
@@ -2466,21 +2469,17 @@ static int imon_probe(struct usb_interface *interface,
 
 		if (ictx->display_supported)
 			imon_init_display(ictx, interface);
-
-		mutex_unlock(&ictx->lock);
 	}
 
 	dev_info(dev, "iMON device (%04x:%04x, intf%d) on usb<%d:%d> initialized\n",
 		 vendor, product, ifnum,
 		 usbdev->bus->busnum, usbdev->devnum);
 
-	mutex_unlock(&driver_lock);
 	usb_put_dev(usbdev);
 
 	return 0;
 
 fail:
-	mutex_unlock(&driver_lock);
 	usb_put_dev(usbdev);
 	dev_err(dev, "unable to register, err %d\n", ret);
 
@@ -2496,10 +2495,8 @@ static void imon_disconnect(struct usb_interface *interface)
 	struct device *dev;
 	int ifnum;
 
-	/* prevent races with multi-interface device probing and display_open */
-	mutex_lock(&driver_lock);
-
 	ictx = usb_get_intfdata(interface);
+	ictx->disconnected = true;
 	dev = ictx->dev;
 	ifnum = interface->cur_altsetting->desc.bInterfaceNumber;
 
@@ -2540,11 +2537,9 @@ static void imon_disconnect(struct usb_interface *interface)
 		}
 	}
 
-	if (!ictx->dev_present_intf0 && !ictx->dev_present_intf1)
+	if (refcount_dec_and_test(&ictx->users))
 		free_imon_context(ictx);
 
-	mutex_unlock(&driver_lock);
-
 	dev_dbg(dev, "%s: iMON device (intf%d) disconnected\n",
 		__func__, ifnum);
 }
-- 
2.35.1

[PATCH AUTOSEL 5.15 081/109] media: cec-adap.c: fix is_configuring state

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 59267fc34f4900dcd2ec3295f6be04b79aee2186 ]

If an adapter is trying to claim a free logical address then it is
in the 'is_configuring' state. If during that process the cable is
disconnected (HPD goes low, which in turn invalidates the physical
address), then cec_adap_unconfigure() is called, and that set the
is_configuring boolean to false, even though the thread that's
trying to claim an LA is still running.

Don't touch the is_configuring bool in cec_adap_unconfigure(), it
will eventually be cleared by the thread. By making that change
the cec_config_log_addr() function also had to change: it was
aborting if is_configuring became false (since that is what
cec_adap_unconfigure() did), but that no longer works. Instead
check if the physical address is invalid. That is a much
more appropriate check anyway.

This fixes a bug where the the adapter could be disabled even
though the device was still configuring. This could cause POLL
transmits to time out.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/cec/core/cec-adap.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/cec/core/cec-adap.c b/drivers/media/cec/core/cec-adap.c
index 1f599e300e42..67776a0d31e8 100644
--- a/drivers/media/cec/core/cec-adap.c
+++ b/drivers/media/cec/core/cec-adap.c
@@ -1272,7 +1272,7 @@ static int cec_config_log_addr(struct cec_adapter *adap,
 		 * While trying to poll the physical address was reset
 		 * and the adapter was unconfigured, so bail out.
 		 */
-		if (!adap->is_configuring)
+		if (adap->phys_addr == CEC_PHYS_ADDR_INVALID)
 			return -EINTR;
 
 		if (err)
@@ -1329,7 +1329,6 @@ static void cec_adap_unconfigure(struct cec_adapter *adap)
 	    adap->phys_addr != CEC_PHYS_ADDR_INVALID)
 		WARN_ON(adap->ops->adap_log_addr(adap, CEC_LOG_ADDR_INVALID));
 	adap->log_addrs.log_addr_mask = 0;
-	adap->is_configuring = false;
 	adap->is_configured = false;
 	cec_flush(adap);
 	wake_up_interruptible(&adap->kthread_waitq);
@@ -1521,9 +1520,10 @@ static int cec_config_thread_func(void *arg)
 	for (i = 0; i < las->num_log_addrs; i++)
 		las->log_addr[i] = CEC_LOG_ADDR_INVALID;
 	cec_adap_unconfigure(adap);
+	adap->is_configuring = false;
 	adap->kthread_config = NULL;
-	mutex_unlock(&adap->lock);
 	complete(&adap->config_completion);
+	mutex_unlock(&adap->lock);
 	return 0;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 082/109] usbnet: Run unregister_netdev() before unbind() again

[Sasha Levin]

From: Lukas Wunner <lukas@wunner.de>

[ Upstream commit d1408f6b4dd78fb1b9e26bcf64477984e5f85409 ]

Commit 2c9d6c2b871d ("usbnet: run unbind() before unregister_netdev()")
sought to fix a use-after-free on disconnect of USB Ethernet adapters.

It turns out that a different fix is necessary to address the issue:
https://lore.kernel.org/netdev/18b3541e5372bc9b9fc733d422f4e698c089077c.1650177997.git.lukas@wunner.de/

So the commit was not necessary.

The commit made binding and unbinding of USB Ethernet asymmetrical:
Before, usbnet_probe() first invoked the ->bind() callback and then
register_netdev().  usbnet_disconnect() mirrored that by first invoking
unregister_netdev() and then ->unbind().

Since the commit, the order in usbnet_disconnect() is reversed and no
longer mirrors usbnet_probe().

One consequence is that a PHY disconnected (and stopped) in ->unbind()
is afterwards stopped once more by unregister_netdev() as it closes the
netdev before unregistering.  That necessitates a contortion in ->stop()
because the PHY may only be stopped if it hasn't already been
disconnected.

Reverting the commit allows making the call to phy_stop() unconditional
in ->stop().

Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/asix_devices.c | 6 +-----
 drivers/net/usb/smsc95xx.c     | 3 +--
 drivers/net/usb/usbnet.c       | 6 +++---
 3 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index bd8f8619ad6f..396505396a2e 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -799,11 +799,7 @@ static int ax88772_stop(struct usbnet *dev)
 {
 	struct asix_common_private *priv = dev->driver_priv;
 
-	/* On unplugged USB, we will get MDIO communication errors and the
-	 * PHY will be set in to PHY_HALTED state.
-	 */
-	if (priv->phydev->state != PHY_HALTED)
-		phy_stop(priv->phydev);
+	phy_stop(priv->phydev);
 
 	return 0;
 }
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index eb0d325e92b7..4e39e4345084 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1217,8 +1217,7 @@ static int smsc95xx_start_phy(struct usbnet *dev)
 
 static int smsc95xx_stop(struct usbnet *dev)
 {
-	if (dev->net->phydev)
-		phy_stop(dev->net->phydev);
+	phy_stop(dev->net->phydev);
 
 	return 0;
 }
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index a33d7fb82a00..af2bbaff2478 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1614,9 +1614,6 @@ void usbnet_disconnect (struct usb_interface *intf)
 		   xdev->bus->bus_name, xdev->devpath,
 		   dev->driver_info->description);
 
-	if (dev->driver_info->unbind)
-		dev->driver_info->unbind(dev, intf);
-
 	net = dev->net;
 	unregister_netdev (net);
 
@@ -1624,6 +1621,9 @@ void usbnet_disconnect (struct usb_interface *intf)
 
 	usb_scuttle_anchored_urbs(&dev->deferred);
 
+	if (dev->driver_info->unbind)
+		dev->driver_info->unbind(dev, intf);
+
 	usb_kill_urb(dev->interrupt);
 	usb_free_urb(dev->interrupt);
 	kfree(dev->padding_pkt);
-- 
2.35.1

[PATCH AUTOSEL 5.15 083/109] init: call time_init() before rand_initialize()

[Sasha Levin]

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

[ Upstream commit fe222a6ca2d53c38433cba5d3be62a39099e708e ]

Currently time_init() is called after rand_initialize(), but
rand_initialize() makes use of the timer on various platforms, and
sometimes this timer needs to be initialized by time_init() first. In
order for random_get_entropy() to not return zero during early boot when
it's potentially used as an entropy source, reverse the order of these
two calls. The block doing random initialization was right before
time_init() before, so changing the order shouldn't have any complicated
effects.

Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 init/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/init/main.c b/init/main.c
index 06b98350ebd2..2b9ba7ea42ec 100644
--- a/init/main.c
+++ b/init/main.c
@@ -1041,11 +1041,13 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void)
 	softirq_init();
 	timekeeping_init();
 	kfence_init();
+	time_init();
 
 	/*
 	 * For best initial stack canary entropy, prepare it after:
 	 * - setup_arch() for any UEFI RNG entropy and boot cmdline access
 	 * - timekeeping_init() for ktime entropy used in rand_initialize()
+	 * - time_init() for making random_get_entropy() work on some platforms
 	 * - rand_initialize() to get any arch-specific entropy like RDRAND
 	 * - add_latent_entropy() to get any latent entropy
 	 * - adding command line entropy
@@ -1055,7 +1057,6 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void)
 	add_device_randomness(command_line, strlen(command_line));
 	boot_init_stack_canary();
 
-	time_init();
 	perf_event_init();
 	profile_init();
 	call_function_init();
-- 
2.35.1

[PATCH AUTOSEL 5.15 084/109] openrisc: start CPU timer early in boot

[Sasha Levin]

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ]

In order to measure the boot process, the timer should be switched on as
early in boot as possible. As well, the commit defines the get_cycles
macro, like the previous patches in this series, so that generic code is
aware that it's implemented by the platform, as is done on other archs.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Acked-by: Stafford Horne <shorne@gmail.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/openrisc/include/asm/timex.h | 1 +
 arch/openrisc/kernel/head.S       | 9 +++++++++
 2 files changed, 10 insertions(+)

diff --git a/arch/openrisc/include/asm/timex.h b/arch/openrisc/include/asm/timex.h
index d52b4e536e3f..5487fa93dd9b 100644
--- a/arch/openrisc/include/asm/timex.h
+++ b/arch/openrisc/include/asm/timex.h
@@ -23,6 +23,7 @@ static inline cycles_t get_cycles(void)
 {
 	return mfspr(SPR_TTCR);
 }
+#define get_cycles get_cycles
 
 /* This isn't really used any more */
 #define CLOCK_TICK_RATE 1000
diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
index 15f1b38dfe03..871f4c858859 100644
--- a/arch/openrisc/kernel/head.S
+++ b/arch/openrisc/kernel/head.S
@@ -521,6 +521,15 @@ _start:
 	l.ori	r3,r0,0x1
 	l.mtspr	r0,r3,SPR_SR
 
+	/*
+	 * Start the TTCR as early as possible, so that the RNG can make use of
+	 * measurements of boot time from the earliest opportunity. Especially
+	 * important is that the TTCR does not return zero by the time we reach
+	 * rand_initialize().
+	 */
+	l.movhi r3,hi(SPR_TTMR_CR)
+	l.mtspr r0,r3,SPR_TTMR
+
 	CLEAR_GPR(r1)
 	CLEAR_GPR(r2)
 	CLEAR_GPR(r3)
-- 
2.35.1

[PATCH AUTOSEL 5.15 084/109] openrisc: start CPU timer early in boot

[Sasha Levin]

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ]

In order to measure the boot process, the timer should be switched on as
early in boot as possible. As well, the commit defines the get_cycles
macro, like the previous patches in this series, so that generic code is
aware that it's implemented by the platform, as is done on other archs.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Acked-by: Stafford Horne <shorne@gmail.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/openrisc/include/asm/timex.h | 1 +
 arch/openrisc/kernel/head.S       | 9 +++++++++
 2 files changed, 10 insertions(+)

diff --git a/arch/openrisc/include/asm/timex.h b/arch/openrisc/include/asm/timex.h
index d52b4e536e3f..5487fa93dd9b 100644
--- a/arch/openrisc/include/asm/timex.h
+++ b/arch/openrisc/include/asm/timex.h
@@ -23,6 +23,7 @@ static inline cycles_t get_cycles(void)
 {
 	return mfspr(SPR_TTCR);
 }
+#define get_cycles get_cycles
 
 /* This isn't really used any more */
 #define CLOCK_TICK_RATE 1000
diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
index 15f1b38dfe03..871f4c858859 100644
--- a/arch/openrisc/kernel/head.S
+++ b/arch/openrisc/kernel/head.S
@@ -521,6 +521,15 @@ _start:
 	l.ori	r3,r0,0x1
 	l.mtspr	r0,r3,SPR_SR
 
+	/*
+	 * Start the TTCR as early as possible, so that the RNG can make use of
+	 * measurements of boot time from the earliest opportunity. Especially
+	 * important is that the TTCR does not return zero by the time we reach
+	 * rand_initialize().
+	 */
+	l.movhi r3,hi(SPR_TTMR_CR)
+	l.mtspr r0,r3,SPR_TTMR
+
 	CLEAR_GPR(r1)
 	CLEAR_GPR(r2)
 	CLEAR_GPR(r3)
-- 
2.35.1

[PATCH AUTOSEL 5.15 085/109] nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags

[Sasha Levin]

From: "Smith, Kyle Miller (Nimble Kernel)" <kyles@hpe.com>

[ Upstream commit da42761181627e9bdc37d18368b827948a583929 ]

In nvme_alloc_admin_tags, the admin_q can be set to an error (typically
-ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which
is checked immediately after the call. However, when we return the error
message up the stack, to nvme_reset_work the error takes us to
nvme_remove_dead_ctrl()
  nvme_dev_disable()
   nvme_suspend_queue(&dev->queues[0]).

Here, we only check that the admin_q is non-NULL, rather than not
an error or NULL, and begin quiescing a queue that never existed, leading
to bad / NULL pointer dereference.

Signed-off-by: Kyle Smith <kyles@hpe.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index e6f55cf6e494..3ddd24a42043 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1680,6 +1680,7 @@ static int nvme_alloc_admin_tags(struct nvme_dev *dev)
 		dev->ctrl.admin_q = blk_mq_init_queue(&dev->admin_tagset);
 		if (IS_ERR(dev->ctrl.admin_q)) {
 			blk_mq_free_tag_set(&dev->admin_tagset);
+			dev->ctrl.admin_q = NULL;
 			return -ENOMEM;
 		}
 		if (!blk_get_queue(dev->ctrl.admin_q)) {
-- 
2.35.1

[PATCH AUTOSEL 5.15 086/109] ASoC: rt5645: Fix errorenous cleanup order

[Sasha Levin]

From: Lin Ma <linma@zju.edu.cn>

[ Upstream commit 2def44d3aec59e38d2701c568d65540783f90f2f ]

There is a logic error when removing rt5645 device as the function
rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and
delete the &rt5645->btn_check_timer latter. However, since the timer
handler rt5645_btn_check_callback() will re-queue the jack_detect_work,
this cleanup order is buggy.

That is, once the del_timer_sync in rt5645_i2c_remove is concurrently
run with the rt5645_btn_check_callback, the canceled jack_detect_work
will be rescheduled again, leading to possible use-after-free.

This patch fix the issue by placing the del_timer_sync function before
the cancel_delayed_work_sync.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220516092035.28283-1-linma@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5645.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index 9408ee63cb26..8ea6d4333562 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -4154,9 +4154,14 @@ static int rt5645_i2c_remove(struct i2c_client *i2c)
 	if (i2c->irq)
 		free_irq(i2c->irq, rt5645);
 
+	/*
+	 * Since the rt5645_btn_check_callback() can queue jack_detect_work,
+	 * the timer need to be delted first
+	 */
+	del_timer_sync(&rt5645->btn_check_timer);
+
 	cancel_delayed_work_sync(&rt5645->jack_detect_work);
 	cancel_delayed_work_sync(&rt5645->rcclock_work);
-	del_timer_sync(&rt5645->btn_check_timer);
 
 	regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies);
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 086/109] ASoC: rt5645: Fix errorenous cleanup order

[Sasha Levin]

From: Lin Ma <linma@zju.edu.cn>

[ Upstream commit 2def44d3aec59e38d2701c568d65540783f90f2f ]

There is a logic error when removing rt5645 device as the function
rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and
delete the &rt5645->btn_check_timer latter. However, since the timer
handler rt5645_btn_check_callback() will re-queue the jack_detect_work,
this cleanup order is buggy.

That is, once the del_timer_sync in rt5645_i2c_remove is concurrently
run with the rt5645_btn_check_callback, the canceled jack_detect_work
will be rescheduled again, leading to possible use-after-free.

This patch fix the issue by placing the del_timer_sync function before
the cancel_delayed_work_sync.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220516092035.28283-1-linma@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5645.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index 9408ee63cb26..8ea6d4333562 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -4154,9 +4154,14 @@ static int rt5645_i2c_remove(struct i2c_client *i2c)
 	if (i2c->irq)
 		free_irq(i2c->irq, rt5645);
 
+	/*
+	 * Since the rt5645_btn_check_callback() can queue jack_detect_work,
+	 * the timer need to be delted first
+	 */
+	del_timer_sync(&rt5645->btn_check_timer);
+
 	cancel_delayed_work_sync(&rt5645->jack_detect_work);
 	cancel_delayed_work_sync(&rt5645->rcclock_work);
-	del_timer_sync(&rt5645->btn_check_timer);
 
 	regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies);
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 087/109] nbd: Fix hung on disconnect request if socket is closed before

[Sasha Levin]

From: Xie Yongji <xieyongji@bytedance.com>

[ Upstream commit 491bf8f236fdeec698fa6744993f1ecf3fafd1a5 ]

When userspace closes the socket before sending a disconnect
request, the following I/O requests will be blocked in
wait_for_reconnect() until dead timeout. This will cause the
following disconnect request also hung on blk_mq_quiesce_queue().
That means we have no way to disconnect a nbd device if there
are some I/O requests waiting for reconnecting until dead timeout.
It's not expected. So let's wake up the thread waiting for
reconnecting directly when a disconnect request is sent.

Reported-by: Xu Jianhai <zero.xu@bytedance.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220322080639.142-1-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/nbd.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 582b23befb5c..8704212482e5 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -896,11 +896,15 @@ static int wait_for_reconnect(struct nbd_device *nbd)
 	struct nbd_config *config = nbd->config;
 	if (!config->dead_conn_timeout)
 		return 0;
-	if (test_bit(NBD_RT_DISCONNECTED, &config->runtime_flags))
+
+	if (!wait_event_timeout(config->conn_wait,
+				test_bit(NBD_RT_DISCONNECTED,
+					 &config->runtime_flags) ||
+				atomic_read(&config->live_connections) > 0,
+				config->dead_conn_timeout))
 		return 0;
-	return wait_event_timeout(config->conn_wait,
-				  atomic_read(&config->live_connections) > 0,
-				  config->dead_conn_timeout) > 0;
+
+	return !test_bit(NBD_RT_DISCONNECTED, &config->runtime_flags);
 }
 
 static int nbd_handle_cmd(struct nbd_cmd *cmd, int index)
@@ -2026,6 +2030,7 @@ static void nbd_disconnect_and_put(struct nbd_device *nbd)
 	mutex_lock(&nbd->config_lock);
 	nbd_disconnect(nbd);
 	sock_shutdown(nbd);
+	wake_up(&nbd->config->conn_wait);
 	/*
 	 * Make sure recv thread has finished, we can safely call nbd_clear_que()
 	 * to cancel the inflight I/Os.
-- 
2.35.1

[PATCH AUTOSEL 5.15 088/109] drm/amd/pm: update smartshift powerboost calc for smu12

[Sasha Levin]

From: Sathishkumar S <sathishkumar.sundararaju@amd.com>

[ Upstream commit 138292f1dc00e7e0724f44769f9da39cf2f3bf0b ]

smartshift apu and dgpu power boost are reported as percentage with
respect to their power limits. This value[0-100] reflects the boost
for the respective device.

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c   | 60 ++++++++++++++-----
 1 file changed, 44 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
index 145f13b8c977..138466081875 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
@@ -1127,6 +1127,39 @@ static int renoir_get_power_profile_mode(struct smu_context *smu,
 	return size;
 }
 
+static void renoir_get_ss_power_percent(SmuMetrics_t *metrics,
+					uint32_t *apu_percent, uint32_t *dgpu_percent)
+{
+	uint32_t apu_boost = 0;
+	uint32_t dgpu_boost = 0;
+	uint16_t apu_limit = 0;
+	uint16_t dgpu_limit = 0;
+	uint16_t apu_power = 0;
+	uint16_t dgpu_power = 0;
+
+	apu_power = metrics->ApuPower;
+	apu_limit = metrics->StapmOriginalLimit;
+	if (apu_power > apu_limit && apu_limit != 0)
+		apu_boost =  ((apu_power - apu_limit) * 100) / apu_limit;
+	apu_boost = (apu_boost > 100) ? 100 : apu_boost;
+
+	dgpu_power = metrics->dGpuPower;
+	if (metrics->StapmCurrentLimit > metrics->StapmOriginalLimit)
+		dgpu_limit = metrics->StapmCurrentLimit - metrics->StapmOriginalLimit;
+	if (dgpu_power > dgpu_limit && dgpu_limit != 0)
+		dgpu_boost = ((dgpu_power - dgpu_limit) * 100) / dgpu_limit;
+	dgpu_boost = (dgpu_boost > 100) ? 100 : dgpu_boost;
+
+	if (dgpu_boost >= apu_boost)
+		apu_boost = 0;
+	else
+		dgpu_boost = 0;
+
+	*apu_percent = apu_boost;
+	*dgpu_percent = dgpu_boost;
+}
+
+
 static int renoir_get_smu_metrics_data(struct smu_context *smu,
 				       MetricsMember_t member,
 				       uint32_t *value)
@@ -1135,6 +1168,9 @@ static int renoir_get_smu_metrics_data(struct smu_context *smu,
 
 	SmuMetrics_t *metrics = (SmuMetrics_t *)smu_table->metrics_table;
 	int ret = 0;
+	uint32_t apu_percent = 0;
+	uint32_t dgpu_percent = 0;
+
 
 	mutex_lock(&smu->metrics_lock);
 
@@ -1183,26 +1219,18 @@ static int renoir_get_smu_metrics_data(struct smu_context *smu,
 		*value = metrics->Voltage[1];
 		break;
 	case METRICS_SS_APU_SHARE:
-		/* return the percentage of APU power with respect to APU's power limit.
-		 * percentage is reported, this isn't boost value. Smartshift power
-		 * boost/shift is only when the percentage is more than 100.
+		/* return the percentage of APU power boost
+		 * with respect to APU's power limit.
 		 */
-		if (metrics->StapmOriginalLimit > 0)
-			*value =  (metrics->ApuPower * 100) / metrics->StapmOriginalLimit;
-		else
-			*value = 0;
+		renoir_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent);
+		*value = apu_percent;
 		break;
 	case METRICS_SS_DGPU_SHARE:
-		/* return the percentage of dGPU power with respect to dGPU's power limit.
-		 * percentage is reported, this isn't boost value. Smartshift power
-		 * boost/shift is only when the percentage is more than 100.
+		/* return the percentage of dGPU power boost
+		 * with respect to dGPU's power limit.
 		 */
-		if ((metrics->dGpuPower > 0) &&
-		    (metrics->StapmCurrentLimit > metrics->StapmOriginalLimit))
-			*value = (metrics->dGpuPower * 100) /
-				  (metrics->StapmCurrentLimit - metrics->StapmOriginalLimit);
-		else
-			*value = 0;
+		renoir_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent);
+		*value = dgpu_percent;
 		break;
 	default:
 		*value = UINT_MAX;
-- 
2.35.1

[PATCH AUTOSEL 5.15 088/109] drm/amd/pm: update smartshift powerboost calc for smu12

[Sasha Levin]

From: Sathishkumar S <sathishkumar.sundararaju@amd.com>

[ Upstream commit 138292f1dc00e7e0724f44769f9da39cf2f3bf0b ]

smartshift apu and dgpu power boost are reported as percentage with
respect to their power limits. This value[0-100] reflects the boost
for the respective device.

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c   | 60 ++++++++++++++-----
 1 file changed, 44 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
index 145f13b8c977..138466081875 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
@@ -1127,6 +1127,39 @@ static int renoir_get_power_profile_mode(struct smu_context *smu,
 	return size;
 }
 
+static void renoir_get_ss_power_percent(SmuMetrics_t *metrics,
+					uint32_t *apu_percent, uint32_t *dgpu_percent)
+{
+	uint32_t apu_boost = 0;
+	uint32_t dgpu_boost = 0;
+	uint16_t apu_limit = 0;
+	uint16_t dgpu_limit = 0;
+	uint16_t apu_power = 0;
+	uint16_t dgpu_power = 0;
+
+	apu_power = metrics->ApuPower;
+	apu_limit = metrics->StapmOriginalLimit;
+	if (apu_power > apu_limit && apu_limit != 0)
+		apu_boost =  ((apu_power - apu_limit) * 100) / apu_limit;
+	apu_boost = (apu_boost > 100) ? 100 : apu_boost;
+
+	dgpu_power = metrics->dGpuPower;
+	if (metrics->StapmCurrentLimit > metrics->StapmOriginalLimit)
+		dgpu_limit = metrics->StapmCurrentLimit - metrics->StapmOriginalLimit;
+	if (dgpu_power > dgpu_limit && dgpu_limit != 0)
+		dgpu_boost = ((dgpu_power - dgpu_limit) * 100) / dgpu_limit;
+	dgpu_boost = (dgpu_boost > 100) ? 100 : dgpu_boost;
+
+	if (dgpu_boost >= apu_boost)
+		apu_boost = 0;
+	else
+		dgpu_boost = 0;
+
+	*apu_percent = apu_boost;
+	*dgpu_percent = dgpu_boost;
+}
+
+
 static int renoir_get_smu_metrics_data(struct smu_context *smu,
 				       MetricsMember_t member,
 				       uint32_t *value)
@@ -1135,6 +1168,9 @@ static int renoir_get_smu_metrics_data(struct smu_context *smu,
 
 	SmuMetrics_t *metrics = (SmuMetrics_t *)smu_table->metrics_table;
 	int ret = 0;
+	uint32_t apu_percent = 0;
+	uint32_t dgpu_percent = 0;
+
 
 	mutex_lock(&smu->metrics_lock);
 
@@ -1183,26 +1219,18 @@ static int renoir_get_smu_metrics_data(struct smu_context *smu,
 		*value = metrics->Voltage[1];
 		break;
 	case METRICS_SS_APU_SHARE:
-		/* return the percentage of APU power with respect to APU's power limit.
-		 * percentage is reported, this isn't boost value. Smartshift power
-		 * boost/shift is only when the percentage is more than 100.
+		/* return the percentage of APU power boost
+		 * with respect to APU's power limit.
 		 */
-		if (metrics->StapmOriginalLimit > 0)
-			*value =  (metrics->ApuPower * 100) / metrics->StapmOriginalLimit;
-		else
-			*value = 0;
+		renoir_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent);
+		*value = apu_percent;
 		break;
 	case METRICS_SS_DGPU_SHARE:
-		/* return the percentage of dGPU power with respect to dGPU's power limit.
-		 * percentage is reported, this isn't boost value. Smartshift power
-		 * boost/shift is only when the percentage is more than 100.
+		/* return the percentage of dGPU power boost
+		 * with respect to dGPU's power limit.
 		 */
-		if ((metrics->dGpuPower > 0) &&
-		    (metrics->StapmCurrentLimit > metrics->StapmOriginalLimit))
-			*value = (metrics->dGpuPower * 100) /
-				  (metrics->StapmCurrentLimit - metrics->StapmOriginalLimit);
-		else
-			*value = 0;
+		renoir_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent);
+		*value = dgpu_percent;
 		break;
 	default:
 		*value = UINT_MAX;
-- 
2.35.1

[PATCH AUTOSEL 5.15 088/109] drm/amd/pm: update smartshift powerboost calc for smu12

[Sasha Levin]

From: Sathishkumar S <sathishkumar.sundararaju@amd.com>

[ Upstream commit 138292f1dc00e7e0724f44769f9da39cf2f3bf0b ]

smartshift apu and dgpu power boost are reported as percentage with
respect to their power limits. This value[0-100] reflects the boost
for the respective device.

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c   | 60 ++++++++++++++-----
 1 file changed, 44 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
index 145f13b8c977..138466081875 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
@@ -1127,6 +1127,39 @@ static int renoir_get_power_profile_mode(struct smu_context *smu,
 	return size;
 }
 
+static void renoir_get_ss_power_percent(SmuMetrics_t *metrics,
+					uint32_t *apu_percent, uint32_t *dgpu_percent)
+{
+	uint32_t apu_boost = 0;
+	uint32_t dgpu_boost = 0;
+	uint16_t apu_limit = 0;
+	uint16_t dgpu_limit = 0;
+	uint16_t apu_power = 0;
+	uint16_t dgpu_power = 0;
+
+	apu_power = metrics->ApuPower;
+	apu_limit = metrics->StapmOriginalLimit;
+	if (apu_power > apu_limit && apu_limit != 0)
+		apu_boost =  ((apu_power - apu_limit) * 100) / apu_limit;
+	apu_boost = (apu_boost > 100) ? 100 : apu_boost;
+
+	dgpu_power = metrics->dGpuPower;
+	if (metrics->StapmCurrentLimit > metrics->StapmOriginalLimit)
+		dgpu_limit = metrics->StapmCurrentLimit - metrics->StapmOriginalLimit;
+	if (dgpu_power > dgpu_limit && dgpu_limit != 0)
+		dgpu_boost = ((dgpu_power - dgpu_limit) * 100) / dgpu_limit;
+	dgpu_boost = (dgpu_boost > 100) ? 100 : dgpu_boost;
+
+	if (dgpu_boost >= apu_boost)
+		apu_boost = 0;
+	else
+		dgpu_boost = 0;
+
+	*apu_percent = apu_boost;
+	*dgpu_percent = dgpu_boost;
+}
+
+
 static int renoir_get_smu_metrics_data(struct smu_context *smu,
 				       MetricsMember_t member,
 				       uint32_t *value)
@@ -1135,6 +1168,9 @@ static int renoir_get_smu_metrics_data(struct smu_context *smu,
 
 	SmuMetrics_t *metrics = (SmuMetrics_t *)smu_table->metrics_table;
 	int ret = 0;
+	uint32_t apu_percent = 0;
+	uint32_t dgpu_percent = 0;
+
 
 	mutex_lock(&smu->metrics_lock);
 
@@ -1183,26 +1219,18 @@ static int renoir_get_smu_metrics_data(struct smu_context *smu,
 		*value = metrics->Voltage[1];
 		break;
 	case METRICS_SS_APU_SHARE:
-		/* return the percentage of APU power with respect to APU's power limit.
-		 * percentage is reported, this isn't boost value. Smartshift power
-		 * boost/shift is only when the percentage is more than 100.
+		/* return the percentage of APU power boost
+		 * with respect to APU's power limit.
 		 */
-		if (metrics->StapmOriginalLimit > 0)
-			*value =  (metrics->ApuPower * 100) / metrics->StapmOriginalLimit;
-		else
-			*value = 0;
+		renoir_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent);
+		*value = apu_percent;
 		break;
 	case METRICS_SS_DGPU_SHARE:
-		/* return the percentage of dGPU power with respect to dGPU's power limit.
-		 * percentage is reported, this isn't boost value. Smartshift power
-		 * boost/shift is only when the percentage is more than 100.
+		/* return the percentage of dGPU power boost
+		 * with respect to dGPU's power limit.
 		 */
-		if ((metrics->dGpuPower > 0) &&
-		    (metrics->StapmCurrentLimit > metrics->StapmOriginalLimit))
-			*value = (metrics->dGpuPower * 100) /
-				  (metrics->StapmCurrentLimit - metrics->StapmOriginalLimit);
-		else
-			*value = 0;
+		renoir_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent);
+		*value = dgpu_percent;
 		break;
 	default:
 		*value = UINT_MAX;
-- 
2.35.1

[PATCH AUTOSEL 5.15 089/109] drm/amd/pm: update smartshift powerboost calc for smu13

[Sasha Levin]

From: Sathishkumar S <sathishkumar.sundararaju@amd.com>

[ Upstream commit cdf4c8ec39872a61a58d62f19b4db80f0f7bc586 ]

smartshift apu and dgpu power boost are reported as percentage
with respect to their power limits. adjust the units of power before
calculating the percentage of boost.

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c  | 62 ++++++++++++++-----
 1 file changed, 46 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c
index 0e1a843608e4..33bd5430c6de 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c
@@ -305,6 +305,42 @@ static int yellow_carp_mode2_reset(struct smu_context *smu)
 	return yellow_carp_mode_reset(smu, SMU_RESET_MODE_2);
 }
 
+
+static void yellow_carp_get_ss_power_percent(SmuMetrics_t *metrics,
+					uint32_t *apu_percent, uint32_t *dgpu_percent)
+{
+	uint32_t apu_boost = 0;
+	uint32_t dgpu_boost = 0;
+	uint16_t apu_limit = 0;
+	uint16_t dgpu_limit = 0;
+	uint16_t apu_power = 0;
+	uint16_t dgpu_power = 0;
+
+	/* APU and dGPU power values are reported in milli Watts
+	 * and STAPM power limits are in Watts */
+	apu_power = metrics->ApuPower/1000;
+	apu_limit = metrics->StapmOpnLimit;
+	if (apu_power > apu_limit && apu_limit != 0)
+		apu_boost =  ((apu_power - apu_limit) * 100) / apu_limit;
+	apu_boost = (apu_boost > 100) ? 100 : apu_boost;
+
+	dgpu_power = metrics->dGpuPower/1000;
+	if (metrics->StapmCurrentLimit > metrics->StapmOpnLimit)
+		dgpu_limit = metrics->StapmCurrentLimit - metrics->StapmOpnLimit;
+	if (dgpu_power > dgpu_limit && dgpu_limit != 0)
+		dgpu_boost = ((dgpu_power - dgpu_limit) * 100) / dgpu_limit;
+	dgpu_boost = (dgpu_boost > 100) ? 100 : dgpu_boost;
+
+	if (dgpu_boost >= apu_boost)
+		apu_boost = 0;
+	else
+		dgpu_boost = 0;
+
+	*apu_percent = apu_boost;
+	*dgpu_percent = dgpu_boost;
+
+}
+
 static int yellow_carp_get_smu_metrics_data(struct smu_context *smu,
 							MetricsMember_t member,
 							uint32_t *value)
@@ -313,6 +349,8 @@ static int yellow_carp_get_smu_metrics_data(struct smu_context *smu,
 
 	SmuMetrics_t *metrics = (SmuMetrics_t *)smu_table->metrics_table;
 	int ret = 0;
+	uint32_t apu_percent = 0;
+	uint32_t dgpu_percent = 0;
 
 	mutex_lock(&smu->metrics_lock);
 
@@ -365,26 +403,18 @@ static int yellow_carp_get_smu_metrics_data(struct smu_context *smu,
 		*value = metrics->Voltage[1];
 		break;
 	case METRICS_SS_APU_SHARE:
-		/* return the percentage of APU power with respect to APU's power limit.
-		 * percentage is reported, this isn't boost value. Smartshift power
-		 * boost/shift is only when the percentage is more than 100.
+		/* return the percentage of APU power boost
+		 * with respect to APU's power limit.
 		 */
-		if (metrics->StapmOpnLimit > 0)
-			*value =  (metrics->ApuPower * 100) / metrics->StapmOpnLimit;
-		else
-			*value = 0;
+		yellow_carp_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent);
+		*value = apu_percent;
 		break;
 	case METRICS_SS_DGPU_SHARE:
-		/* return the percentage of dGPU power with respect to dGPU's power limit.
-		 * percentage is reported, this isn't boost value. Smartshift power
-		 * boost/shift is only when the percentage is more than 100.
+		/* return the percentage of dGPU power boost
+		 * with respect to dGPU's power limit.
 		 */
-		if ((metrics->dGpuPower > 0) &&
-		    (metrics->StapmCurrentLimit > metrics->StapmOpnLimit))
-			*value = (metrics->dGpuPower * 100) /
-				  (metrics->StapmCurrentLimit - metrics->StapmOpnLimit);
-		else
-			*value = 0;
+		yellow_carp_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent);
+		*value = dgpu_percent;
 		break;
 	default:
 		*value = UINT_MAX;
-- 
2.35.1

[PATCH AUTOSEL 5.15 089/109] drm/amd/pm: update smartshift powerboost calc for smu13

[Sasha Levin]

From: Sathishkumar S <sathishkumar.sundararaju@amd.com>

[ Upstream commit cdf4c8ec39872a61a58d62f19b4db80f0f7bc586 ]

smartshift apu and dgpu power boost are reported as percentage
with respect to their power limits. adjust the units of power before
calculating the percentage of boost.

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c  | 62 ++++++++++++++-----
 1 file changed, 46 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c
index 0e1a843608e4..33bd5430c6de 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c
@@ -305,6 +305,42 @@ static int yellow_carp_mode2_reset(struct smu_context *smu)
 	return yellow_carp_mode_reset(smu, SMU_RESET_MODE_2);
 }
 
+
+static void yellow_carp_get_ss_power_percent(SmuMetrics_t *metrics,
+					uint32_t *apu_percent, uint32_t *dgpu_percent)
+{
+	uint32_t apu_boost = 0;
+	uint32_t dgpu_boost = 0;
+	uint16_t apu_limit = 0;
+	uint16_t dgpu_limit = 0;
+	uint16_t apu_power = 0;
+	uint16_t dgpu_power = 0;
+
+	/* APU and dGPU power values are reported in milli Watts
+	 * and STAPM power limits are in Watts */
+	apu_power = metrics->ApuPower/1000;
+	apu_limit = metrics->StapmOpnLimit;
+	if (apu_power > apu_limit && apu_limit != 0)
+		apu_boost =  ((apu_power - apu_limit) * 100) / apu_limit;
+	apu_boost = (apu_boost > 100) ? 100 : apu_boost;
+
+	dgpu_power = metrics->dGpuPower/1000;
+	if (metrics->StapmCurrentLimit > metrics->StapmOpnLimit)
+		dgpu_limit = metrics->StapmCurrentLimit - metrics->StapmOpnLimit;
+	if (dgpu_power > dgpu_limit && dgpu_limit != 0)
+		dgpu_boost = ((dgpu_power - dgpu_limit) * 100) / dgpu_limit;
+	dgpu_boost = (dgpu_boost > 100) ? 100 : dgpu_boost;
+
+	if (dgpu_boost >= apu_boost)
+		apu_boost = 0;
+	else
+		dgpu_boost = 0;
+
+	*apu_percent = apu_boost;
+	*dgpu_percent = dgpu_boost;
+
+}
+
 static int yellow_carp_get_smu_metrics_data(struct smu_context *smu,
 							MetricsMember_t member,
 							uint32_t *value)
@@ -313,6 +349,8 @@ static int yellow_carp_get_smu_metrics_data(struct smu_context *smu,
 
 	SmuMetrics_t *metrics = (SmuMetrics_t *)smu_table->metrics_table;
 	int ret = 0;
+	uint32_t apu_percent = 0;
+	uint32_t dgpu_percent = 0;
 
 	mutex_lock(&smu->metrics_lock);
 
@@ -365,26 +403,18 @@ static int yellow_carp_get_smu_metrics_data(struct smu_context *smu,
 		*value = metrics->Voltage[1];
 		break;
 	case METRICS_SS_APU_SHARE:
-		/* return the percentage of APU power with respect to APU's power limit.
-		 * percentage is reported, this isn't boost value. Smartshift power
-		 * boost/shift is only when the percentage is more than 100.
+		/* return the percentage of APU power boost
+		 * with respect to APU's power limit.
 		 */
-		if (metrics->StapmOpnLimit > 0)
-			*value =  (metrics->ApuPower * 100) / metrics->StapmOpnLimit;
-		else
-			*value = 0;
+		yellow_carp_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent);
+		*value = apu_percent;
 		break;
 	case METRICS_SS_DGPU_SHARE:
-		/* return the percentage of dGPU power with respect to dGPU's power limit.
-		 * percentage is reported, this isn't boost value. Smartshift power
-		 * boost/shift is only when the percentage is more than 100.
+		/* return the percentage of dGPU power boost
+		 * with respect to dGPU's power limit.
 		 */
-		if ((metrics->dGpuPower > 0) &&
-		    (metrics->StapmCurrentLimit > metrics->StapmOpnLimit))
-			*value = (metrics->dGpuPower * 100) /
-				  (metrics->StapmCurrentLimit - metrics->StapmOpnLimit);
-		else
-			*value = 0;
+		yellow_carp_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent);
+		*value = dgpu_percent;
 		break;
 	default:
 		*value = UINT_MAX;
-- 
2.35.1

[PATCH AUTOSEL 5.15 089/109] drm/amd/pm: update smartshift powerboost calc for smu13

[Sasha Levin]

From: Sathishkumar S <sathishkumar.sundararaju@amd.com>

[ Upstream commit cdf4c8ec39872a61a58d62f19b4db80f0f7bc586 ]

smartshift apu and dgpu power boost are reported as percentage
with respect to their power limits. adjust the units of power before
calculating the percentage of boost.

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c  | 62 ++++++++++++++-----
 1 file changed, 46 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c
index 0e1a843608e4..33bd5430c6de 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c
@@ -305,6 +305,42 @@ static int yellow_carp_mode2_reset(struct smu_context *smu)
 	return yellow_carp_mode_reset(smu, SMU_RESET_MODE_2);
 }
 
+
+static void yellow_carp_get_ss_power_percent(SmuMetrics_t *metrics,
+					uint32_t *apu_percent, uint32_t *dgpu_percent)
+{
+	uint32_t apu_boost = 0;
+	uint32_t dgpu_boost = 0;
+	uint16_t apu_limit = 0;
+	uint16_t dgpu_limit = 0;
+	uint16_t apu_power = 0;
+	uint16_t dgpu_power = 0;
+
+	/* APU and dGPU power values are reported in milli Watts
+	 * and STAPM power limits are in Watts */
+	apu_power = metrics->ApuPower/1000;
+	apu_limit = metrics->StapmOpnLimit;
+	if (apu_power > apu_limit && apu_limit != 0)
+		apu_boost =  ((apu_power - apu_limit) * 100) / apu_limit;
+	apu_boost = (apu_boost > 100) ? 100 : apu_boost;
+
+	dgpu_power = metrics->dGpuPower/1000;
+	if (metrics->StapmCurrentLimit > metrics->StapmOpnLimit)
+		dgpu_limit = metrics->StapmCurrentLimit - metrics->StapmOpnLimit;
+	if (dgpu_power > dgpu_limit && dgpu_limit != 0)
+		dgpu_boost = ((dgpu_power - dgpu_limit) * 100) / dgpu_limit;
+	dgpu_boost = (dgpu_boost > 100) ? 100 : dgpu_boost;
+
+	if (dgpu_boost >= apu_boost)
+		apu_boost = 0;
+	else
+		dgpu_boost = 0;
+
+	*apu_percent = apu_boost;
+	*dgpu_percent = dgpu_boost;
+
+}
+
 static int yellow_carp_get_smu_metrics_data(struct smu_context *smu,
 							MetricsMember_t member,
 							uint32_t *value)
@@ -313,6 +349,8 @@ static int yellow_carp_get_smu_metrics_data(struct smu_context *smu,
 
 	SmuMetrics_t *metrics = (SmuMetrics_t *)smu_table->metrics_table;
 	int ret = 0;
+	uint32_t apu_percent = 0;
+	uint32_t dgpu_percent = 0;
 
 	mutex_lock(&smu->metrics_lock);
 
@@ -365,26 +403,18 @@ static int yellow_carp_get_smu_metrics_data(struct smu_context *smu,
 		*value = metrics->Voltage[1];
 		break;
 	case METRICS_SS_APU_SHARE:
-		/* return the percentage of APU power with respect to APU's power limit.
-		 * percentage is reported, this isn't boost value. Smartshift power
-		 * boost/shift is only when the percentage is more than 100.
+		/* return the percentage of APU power boost
+		 * with respect to APU's power limit.
 		 */
-		if (metrics->StapmOpnLimit > 0)
-			*value =  (metrics->ApuPower * 100) / metrics->StapmOpnLimit;
-		else
-			*value = 0;
+		yellow_carp_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent);
+		*value = apu_percent;
 		break;
 	case METRICS_SS_DGPU_SHARE:
-		/* return the percentage of dGPU power with respect to dGPU's power limit.
-		 * percentage is reported, this isn't boost value. Smartshift power
-		 * boost/shift is only when the percentage is more than 100.
+		/* return the percentage of dGPU power boost
+		 * with respect to dGPU's power limit.
 		 */
-		if ((metrics->dGpuPower > 0) &&
-		    (metrics->StapmCurrentLimit > metrics->StapmOpnLimit))
-			*value = (metrics->dGpuPower * 100) /
-				  (metrics->StapmCurrentLimit - metrics->StapmOpnLimit);
-		else
-			*value = 0;
+		yellow_carp_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent);
+		*value = dgpu_percent;
 		break;
 	default:
 		*value = UINT_MAX;
-- 
2.35.1

[PATCH AUTOSEL 5.15 090/109] net: phy: micrel: Allow probing without .driver_data

[Sasha Levin]

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit f2ef6f7539c68c6bd6c32323d8845ee102b7c450 ]

Currently, if the .probe element is present in the phy_driver structure
and the .driver_data is not, a NULL pointer dereference happens.

Allow passing .probe without .driver_data by inserting NULL checks
for priv->type.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220513114613.762810-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/micrel.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 64d829ed9887..05a8985d7107 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -335,7 +335,7 @@ static int kszphy_config_reset(struct phy_device *phydev)
 		}
 	}
 
-	if (priv->led_mode >= 0)
+	if (priv->type && priv->led_mode >= 0)
 		kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode);
 
 	return 0;
@@ -351,10 +351,10 @@ static int kszphy_config_init(struct phy_device *phydev)
 
 	type = priv->type;
 
-	if (type->has_broadcast_disable)
+	if (type && type->has_broadcast_disable)
 		kszphy_broadcast_disable(phydev);
 
-	if (type->has_nand_tree_disable)
+	if (type && type->has_nand_tree_disable)
 		kszphy_nand_tree_disable(phydev);
 
 	return kszphy_config_reset(phydev);
@@ -1328,7 +1328,7 @@ static int kszphy_probe(struct phy_device *phydev)
 
 	priv->type = type;
 
-	if (type->led_mode_reg) {
+	if (type && type->led_mode_reg) {
 		ret = of_property_read_u32(np, "micrel,led-mode",
 				&priv->led_mode);
 		if (ret)
@@ -1349,7 +1349,8 @@ static int kszphy_probe(struct phy_device *phydev)
 		unsigned long rate = clk_get_rate(clk);
 		bool rmii_ref_clk_sel_25_mhz;
 
-		priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel;
+		if (type)
+			priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel;
 		rmii_ref_clk_sel_25_mhz = of_property_read_bool(np,
 				"micrel,rmii-reference-clock-select-25-mhz");
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 091/109] media: exynos4-is: Fix compile warning

[Sasha Levin]

From: Kwanghoon Son <k.son@samsung.com>

[ Upstream commit e080f5c1f2b6d02c02ee5d674e0e392ccf63bbaf ]

Declare static on function 'fimc_isp_video_device_unregister'.

When VIDEO_EXYNOS4_ISP_DMA_CAPTURE=n, compiler warns about
warning: no previous prototype for function [-Wmissing-prototypes]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kwanghoon Son <k.son@samsung.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/fimc-isp-video.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.h b/drivers/media/platform/exynos4-is/fimc-isp-video.h
index edcb3a5e3cb9..2dd4ddbc748a 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp-video.h
+++ b/drivers/media/platform/exynos4-is/fimc-isp-video.h
@@ -32,7 +32,7 @@ static inline int fimc_isp_video_device_register(struct fimc_isp *isp,
 	return 0;
 }
 
-void fimc_isp_video_device_unregister(struct fimc_isp *isp,
+static inline void fimc_isp_video_device_unregister(struct fimc_isp *isp,
 				enum v4l2_buf_type type)
 {
 }
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 091/109] media: exynos4-is: Fix compile warning

[Sasha Levin]

From: Kwanghoon Son <k.son@samsung.com>

[ Upstream commit e080f5c1f2b6d02c02ee5d674e0e392ccf63bbaf ]

Declare static on function 'fimc_isp_video_device_unregister'.

When VIDEO_EXYNOS4_ISP_DMA_CAPTURE=n, compiler warns about
warning: no previous prototype for function [-Wmissing-prototypes]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kwanghoon Son <k.son@samsung.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/fimc-isp-video.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.h b/drivers/media/platform/exynos4-is/fimc-isp-video.h
index edcb3a5e3cb9..2dd4ddbc748a 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp-video.h
+++ b/drivers/media/platform/exynos4-is/fimc-isp-video.h
@@ -32,7 +32,7 @@ static inline int fimc_isp_video_device_register(struct fimc_isp *isp,
 	return 0;
 }
 
-void fimc_isp_video_device_unregister(struct fimc_isp *isp,
+static inline void fimc_isp_video_device_unregister(struct fimc_isp *isp,
 				enum v4l2_buf_type type)
 {
 }
-- 
2.35.1

[PATCH AUTOSEL 5.15 092/109] media: hantro: Stop using H.264 parameter pic_num

[Sasha Levin]

From: Nicolas Dufresne <nicolas.dufresne@collabora.com>

[ Upstream commit 831410700909f4e29d5af1ef26b8c59fc2d1988e ]

The hardware expects FrameNumWrap or long_term_frame_idx. Picture
numbers are per field, and are mostly used during the memory
management process, which is done in userland. This fixes two
ITU conformance tests:

  - MR6_BT_B
  - MR8_BT_B

Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/hantro/hantro_h264.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro_h264.c b/drivers/staging/media/hantro/hantro_h264.c
index 0b4d2491be3b..228629fb3cdf 100644
--- a/drivers/staging/media/hantro/hantro_h264.c
+++ b/drivers/staging/media/hantro/hantro_h264.c
@@ -354,8 +354,6 @@ u16 hantro_h264_get_ref_nbr(struct hantro_ctx *ctx, unsigned int dpb_idx)
 
 	if (!(dpb->flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE))
 		return 0;
-	if (dpb->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM)
-		return dpb->pic_num;
 	return dpb->frame_num;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 092/109] media: hantro: Stop using H.264 parameter pic_num

[Sasha Levin]

From: Nicolas Dufresne <nicolas.dufresne@collabora.com>

[ Upstream commit 831410700909f4e29d5af1ef26b8c59fc2d1988e ]

The hardware expects FrameNumWrap or long_term_frame_idx. Picture
numbers are per field, and are mostly used during the memory
management process, which is done in userland. This fixes two
ITU conformance tests:

  - MR6_BT_B
  - MR8_BT_B

Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/hantro/hantro_h264.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro_h264.c b/drivers/staging/media/hantro/hantro_h264.c
index 0b4d2491be3b..228629fb3cdf 100644
--- a/drivers/staging/media/hantro/hantro_h264.c
+++ b/drivers/staging/media/hantro/hantro_h264.c
@@ -354,8 +354,6 @@ u16 hantro_h264_get_ref_nbr(struct hantro_ctx *ctx, unsigned int dpb_idx)
 
 	if (!(dpb->flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE))
 		return 0;
-	if (dpb->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM)
-		return dpb->pic_num;
 	return dpb->frame_num;
 }
 
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 5.15 093/109] ASoC: max98357a: remove dependency on GPIOLIB

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 21ca3274333f5c1cbbf9d91e5b33f4f2463859b2 ]

commit dcc2c012c7691 ("ASoC: Fix gpiolib dependencies") removed a
series of unnecessary dependencies on GPIOLIB when the gpio was
optional.

A similar simplification seems valid for max98357a, so remove the
dependency as well. This will avoid the following warning

   WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A
     Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
     Selected by [y]:
     - SND_SOC_INTEL_SOF_CS42L42_MACH [=y] && SOUND [=y] && !UML &&
       SND [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
       (SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) && I2C
       [=y] && ACPI [=y] && SND_HDA_CODEC_HDMI [=y] &&
       SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=y] ||
       COMPILE_TEST [=n])

Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220517172647.468244-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 47e675e8bd00..2cbf4fc0f675 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -900,7 +900,6 @@ config SND_SOC_MAX98095
 
 config SND_SOC_MAX98357A
 	tristate "Maxim MAX98357A CODEC"
-	depends on GPIOLIB
 
 config SND_SOC_MAX98371
 	tristate
-- 
2.35.1

[PATCH AUTOSEL 5.15 093/109] ASoC: max98357a: remove dependency on GPIOLIB

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 21ca3274333f5c1cbbf9d91e5b33f4f2463859b2 ]

commit dcc2c012c7691 ("ASoC: Fix gpiolib dependencies") removed a
series of unnecessary dependencies on GPIOLIB when the gpio was
optional.

A similar simplification seems valid for max98357a, so remove the
dependency as well. This will avoid the following warning

   WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A
     Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
     Selected by [y]:
     - SND_SOC_INTEL_SOF_CS42L42_MACH [=y] && SOUND [=y] && !UML &&
       SND [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
       (SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) && I2C
       [=y] && ACPI [=y] && SND_HDA_CODEC_HDMI [=y] &&
       SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=y] ||
       COMPILE_TEST [=n])

Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220517172647.468244-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 47e675e8bd00..2cbf4fc0f675 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -900,7 +900,6 @@ config SND_SOC_MAX98095
 
 config SND_SOC_MAX98357A
 	tristate "Maxim MAX98357A CODEC"
-	depends on GPIOLIB
 
 config SND_SOC_MAX98371
 	tristate
-- 
2.35.1

[PATCH AUTOSEL 5.15 094/109] ASoC: rt1015p: remove dependency on GPIOLIB

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit b390c25c6757b9d56cecdfbf6d55f15fc89a6386 ]

commit dcc2c012c7691 ("ASoC: Fix gpiolib dependencies") removed a
series of unnecessary dependencies on GPIOLIB when the gpio was
optional.

A similar simplification seems valid for rt1015p, so remove the
dependency as well. This will avoid the following warning

  WARNING: unmet direct dependencies detected for SND_SOC_RT1015P

     Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] &&
     GPIOLIB [=n]

     Selected by [y]:

     - SND_SOC_INTEL_SOF_RT5682_MACH [=y] && SOUND [=y] && !UML && SND
       [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
       (SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) && I2C
       [=y] && ACPI [=y] && (SND_HDA_CODEC_HDMI [=y] &&
       SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=y] ||
       COMPILE_TEST [=y]) || SND_SOC_SOF_BAYTRAIL [=n] &&
       (X86_INTEL_LPSS [=n] || COMPILE_TEST [=y]))

Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220517172647.468244-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 2cbf4fc0f675..d59a7e99ce42 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -1148,7 +1148,6 @@ config SND_SOC_RT1015
 
 config SND_SOC_RT1015P
 	tristate
-	depends on GPIOLIB
 
 config SND_SOC_RT1019
 	tristate
-- 
2.35.1

[PATCH AUTOSEL 5.15 094/109] ASoC: rt1015p: remove dependency on GPIOLIB

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit b390c25c6757b9d56cecdfbf6d55f15fc89a6386 ]

commit dcc2c012c7691 ("ASoC: Fix gpiolib dependencies") removed a
series of unnecessary dependencies on GPIOLIB when the gpio was
optional.

A similar simplification seems valid for rt1015p, so remove the
dependency as well. This will avoid the following warning

  WARNING: unmet direct dependencies detected for SND_SOC_RT1015P

     Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] &&
     GPIOLIB [=n]

     Selected by [y]:

     - SND_SOC_INTEL_SOF_RT5682_MACH [=y] && SOUND [=y] && !UML && SND
       [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
       (SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) && I2C
       [=y] && ACPI [=y] && (SND_HDA_CODEC_HDMI [=y] &&
       SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=y] ||
       COMPILE_TEST [=y]) || SND_SOC_SOF_BAYTRAIL [=n] &&
       (X86_INTEL_LPSS [=n] || COMPILE_TEST [=y]))

Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220517172647.468244-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 2cbf4fc0f675..d59a7e99ce42 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -1148,7 +1148,6 @@ config SND_SOC_RT1015
 
 config SND_SOC_RT1015P
 	tristate
-	depends on GPIOLIB
 
 config SND_SOC_RT1019
 	tristate
-- 
2.35.1

[PATCH AUTOSEL 5.15 095/109] ACPI: CPPC: Assume no transition latency if no PCCT

[Sasha Levin]

From: Pierre Gondois <Pierre.Gondois@arm.com>

[ Upstream commit 6380b7b2b29da9d9c5ab2d4a265901cd93ba3696 ]

The transition_delay_us (struct cpufreq_policy) is currently defined
as:
  Preferred average time interval between consecutive invocations of
  the driver to set the frequency for this policy.  To be set by the
  scaling driver (0, which is the default, means no preference).
The transition_latency represents the amount of time necessary for a
CPU to change its frequency.

A PCCT table advertises mutliple values:
- pcc_nominal: Expected latency to process a command, in microseconds
- pcc_mpar: The maximum number of periodic requests that the subspace
  channel can support, reported in commands per minute. 0 indicates no
  limitation.
- pcc_mrtt: The minimum amount of time that OSPM must wait after the
  completion of a command before issuing the next command,
  in microseconds.
cppc_get_transition_latency() allows to get the max of them.

commit d4f3388afd48 ("cpufreq / CPPC: Set platform specific
transition_delay_us") allows to select transition_delay_us based on
the platform, and fallbacks to cppc_get_transition_latency()
otherwise.

If _CPC objects are not using PCC channels (no PPCT table), the
transition_delay_us is set to CPUFREQ_ETERNAL, leading to really long
periods between frequency updates (~4s).

If the desired_reg, where performance requests are written, is in
SystemMemory or SystemIo ACPI address space, there is no delay
in requests. So return 0 instead of CPUFREQ_ETERNAL, leading to
transition_delay_us being set to LATENCY_MULTIPLIER us (1000 us).

This patch also adds two macros to check the address spaces.

Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/cppc_acpi.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 71b87c16f92d..ed1341030684 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -100,6 +100,16 @@ static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
 				(cpc)->cpc_entry.reg.space_id ==	\
 				ACPI_ADR_SPACE_PLATFORM_COMM)
 
+/* Check if a CPC register is in SystemMemory */
+#define CPC_IN_SYSTEM_MEMORY(cpc) ((cpc)->type == ACPI_TYPE_BUFFER &&	\
+				(cpc)->cpc_entry.reg.space_id ==	\
+				ACPI_ADR_SPACE_SYSTEM_MEMORY)
+
+/* Check if a CPC register is in SystemIo */
+#define CPC_IN_SYSTEM_IO(cpc) ((cpc)->type == ACPI_TYPE_BUFFER &&	\
+				(cpc)->cpc_entry.reg.space_id ==	\
+				ACPI_ADR_SPACE_SYSTEM_IO)
+
 /* Evaluates to True if reg is a NULL register descriptor */
 #define IS_NULL_REG(reg) ((reg)->space_id ==  ACPI_ADR_SPACE_SYSTEM_MEMORY && \
 				(reg)->address == 0 &&			\
@@ -1378,6 +1388,9 @@ EXPORT_SYMBOL_GPL(cppc_set_perf);
  * transition latency for performance change requests. The closest we have
  * is the timing information from the PCCT tables which provides the info
  * on the number and frequency of PCC commands the platform can handle.
+ *
+ * If desired_reg is in the SystemMemory or SystemIo ACPI address space,
+ * then assume there is no latency.
  */
 unsigned int cppc_get_transition_latency(int cpu_num)
 {
@@ -1403,7 +1416,9 @@ unsigned int cppc_get_transition_latency(int cpu_num)
 		return CPUFREQ_ETERNAL;
 
 	desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
-	if (!CPC_IN_PCC(desired_reg))
+	if (CPC_IN_SYSTEM_MEMORY(desired_reg) || CPC_IN_SYSTEM_IO(desired_reg))
+		return 0;
+	else if (!CPC_IN_PCC(desired_reg))
 		return CPUFREQ_ETERNAL;
 
 	if (pcc_ss_id < 0)
-- 
2.35.1

[PATCH AUTOSEL 5.15 096/109] nvme: set non-mdts limits in nvme_scan_work

[Sasha Levin]

From: Chaitanya Kulkarni <kch@nvidia.com>

[ Upstream commit 78288665b5d0154978fed431985310cb4f166836 ]

In current implementation we set the non-mdts limits by calling
nvme_init_non_mdts_limits() from nvme_init_ctrl_finish().
This also tries to set the limits for the discovery controller which
has no I/O queues resulting in the warning message reported by the
nvme_log_error() when running blktest nvme/002: -

[ 2005.155946] run blktests nvme/002 at 2022-04-09 16:57:47
[ 2005.192223] loop: module loaded
[ 2005.196429] nvmet: adding nsid 1 to subsystem blktests-subsystem-0
[ 2005.200334] nvmet: adding nsid 1 to subsystem blktests-subsystem-1

<------------------------------SNIP---------------------------------->

[ 2008.958108] nvmet: adding nsid 1 to subsystem blktests-subsystem-997
[ 2008.962082] nvmet: adding nsid 1 to subsystem blktests-subsystem-998
[ 2008.966102] nvmet: adding nsid 1 to subsystem blktests-subsystem-999
[ 2008.973132] nvmet: creating discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN testhostnqn.
*[ 2008.973196] nvme1: Identify(0x6), Invalid Field in Command (sct 0x0 / sc 0x2) MORE DNR*
[ 2008.974595] nvme nvme1: new ctrl: "nqn.2014-08.org.nvmexpress.discovery"
[ 2009.103248] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"

Move the call of nvme_init_non_mdts_limits() to nvme_scan_work() after
we verify that I/O queues are created since that is a converging point
for each transport where these limits are actually used.

1. FC :
nvme_fc_create_association()
 ...
 nvme_fc_create_io_queues(ctrl);
 ...
 nvme_start_ctrl()
  nvme_scan_queue()
   nvme_scan_work()

2. PCIe:-
nvme_reset_work()
 ...
 nvme_setup_io_queues()
  nvme_create_io_queues()
   nvme_alloc_queue()
 ...
 nvme_start_ctrl()
  nvme_scan_queue()
   nvme_scan_work()

3. RDMA :-
nvme_rdma_setup_ctrl
 ...
  nvme_rdma_configure_io_queues
  ...
  nvme_start_ctrl()
   nvme_scan_queue()
    nvme_scan_work()

4. TCP :-
nvme_tcp_setup_ctrl
 ...
  nvme_tcp_configure_io_queues
  ...
  nvme_start_ctrl()
   nvme_scan_queue()
    nvme_scan_work()

* nvme_scan_work()
...
nvme_validate_or_alloc_ns()
  nvme_alloc_ns()
   nvme_update_ns_info()
    nvme_update_disk_info()
     nvme_config_discard() <---
     blk_queue_max_write_zeroes_sectors() <---

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 87877397d1ad..711b89424bd0 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3032,10 +3032,6 @@ int nvme_init_ctrl_finish(struct nvme_ctrl *ctrl)
 	if (ret)
 		return ret;
 
-	ret = nvme_init_non_mdts_limits(ctrl);
-	if (ret < 0)
-		return ret;
-
 	ret = nvme_configure_apst(ctrl);
 	if (ret < 0)
 		return ret;
@@ -4096,11 +4092,26 @@ static void nvme_scan_work(struct work_struct *work)
 {
 	struct nvme_ctrl *ctrl =
 		container_of(work, struct nvme_ctrl, scan_work);
+	int ret;
 
 	/* No tagset on a live ctrl means IO queues could not created */
 	if (ctrl->state != NVME_CTRL_LIVE || !ctrl->tagset)
 		return;
 
+	/*
+	 * Identify controller limits can change at controller reset due to
+	 * new firmware download, even though it is not common we cannot ignore
+	 * such scenario. Controller's non-mdts limits are reported in the unit
+	 * of logical blocks that is dependent on the format of attached
+	 * namespace. Hence re-read the limits at the time of ns allocation.
+	 */
+	ret = nvme_init_non_mdts_limits(ctrl);
+	if (ret < 0) {
+		dev_warn(ctrl->device,
+			"reading non-mdts-limits failed: %d\n", ret);
+		return;
+	}
+
 	if (test_and_clear_bit(NVME_AER_NOTICE_NS_CHANGED, &ctrl->events)) {
 		dev_info(ctrl->device, "rescanning namespaces.\n");
 		nvme_clear_changed_ns_log(ctrl);
-- 
2.35.1

[PATCH AUTOSEL 5.15 097/109] can: mcp251xfd: silence clang's -Wunaligned-access warning

[Sasha Levin]

From: Vincent Mailhol <mailhol.vincent@wanadoo.fr>

[ Upstream commit 1a6dd9996699889313327be03981716a8337656b ]

clang emits a -Wunaligned-access warning on union
mcp251xfd_tx_ojb_load_buf.

The reason is that field hw_tx_obj (not declared as packed) is being
packed right after a 16 bits field inside a packed struct:

| union mcp251xfd_tx_obj_load_buf {
| 	struct __packed {
| 		struct mcp251xfd_buf_cmd cmd;
| 		  /* ^ 16 bits fields */
| 		struct mcp251xfd_hw_tx_obj_raw hw_tx_obj;
| 		  /* ^ not declared as packed */
| 	} nocrc;
| 	struct __packed {
| 		struct mcp251xfd_buf_cmd_crc cmd;
| 		struct mcp251xfd_hw_tx_obj_raw hw_tx_obj;
| 		__be16 crc;
| 	} crc;
| } ____cacheline_aligned;

Starting from LLVM 14, having an unpacked struct nested in a packed
struct triggers a warning. c.f. [1].

This is a false positive because the field is always being accessed
with the relevant put_unaligned_*() function. Adding __packed to the
structure declaration silences the warning.

[1] https://github.com/llvm/llvm-project/issues/55520

Link: https://lore.kernel.org/all/20220518114357.55452-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/spi/mcp251xfd/mcp251xfd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
index 0f322dabaf65..281856eea2ef 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
@@ -433,7 +433,7 @@ struct mcp251xfd_hw_tef_obj {
 /* The tx_obj_raw version is used in spi async, i.e. without
  * regmap. We have to take care of endianness ourselves.
  */
-struct mcp251xfd_hw_tx_obj_raw {
+struct __packed mcp251xfd_hw_tx_obj_raw {
 	__le32 id;
 	__le32 flags;
 	u8 data[sizeof_field(struct canfd_frame, data)];
-- 
2.35.1

[PATCH AUTOSEL 5.15 098/109] x86/microcode: Add explicit CPU vendor dependency

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 9c55d99e099bd7aa6b91fce8718505c35d5dfc65 ]

Add an explicit dependency to the respective CPU vendor so that the
respective microcode support for it gets built only when that support is
enabled.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/8ead0da9-9545-b10d-e3db-7df1a1f219e4@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d02b04d30096..1d0f16b53393 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1323,7 +1323,7 @@ config MICROCODE
 
 config MICROCODE_INTEL
 	bool "Intel microcode loading support"
-	depends on MICROCODE
+	depends on CPU_SUP_INTEL && MICROCODE
 	default MICROCODE
 	help
 	  This options enables microcode patch loading support for Intel
@@ -1335,7 +1335,7 @@ config MICROCODE_INTEL
 
 config MICROCODE_AMD
 	bool "AMD microcode loading support"
-	depends on MICROCODE
+	depends on CPU_SUP_AMD && MICROCODE
 	help
 	  If you select this option, microcode patch loading support for AMD
 	  processors will be enabled.
-- 
2.35.1

[PATCH AUTOSEL 5.15 099/109] net: ipa: ignore endianness if there is no header

[Sasha Levin]

From: Alex Elder <elder@linaro.org>

[ Upstream commit 332ef7c814bdd60f08d0d9013d0e1104798b2d23 ]

If we program an RX endpoint to have no header (header length is 0),
header-related endpoint configuration values are meaningless and are
ignored.

The only case we support that defines a header is QMAP endpoints.
In ipa_endpoint_init_hdr_ext() we set the endianness mask value
unconditionally, but it should not be done if there is no header
(meaning it is not configured for QMAP).

Set the endianness conditionally, and rearrange the logic in that
function slightly to avoid testing the qmap flag twice.

Delete an incorrect comment in ipa_endpoint_init_aggr().

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ipa/ipa_endpoint.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ipa/ipa_endpoint.c b/drivers/net/ipa/ipa_endpoint.c
index 87e42db1b61e..8e31c2ba5057 100644
--- a/drivers/net/ipa/ipa_endpoint.c
+++ b/drivers/net/ipa/ipa_endpoint.c
@@ -570,19 +570,23 @@ static void ipa_endpoint_init_hdr_ext(struct ipa_endpoint *endpoint)
 	struct ipa *ipa = endpoint->ipa;
 	u32 val = 0;
 
-	val |= HDR_ENDIANNESS_FMASK;		/* big endian */
-
-	/* A QMAP header contains a 6 bit pad field at offset 0.  The RMNet
-	 * driver assumes this field is meaningful in packets it receives,
-	 * and assumes the header's payload length includes that padding.
-	 * The RMNet driver does *not* pad packets it sends, however, so
-	 * the pad field (although 0) should be ignored.
-	 */
-	if (endpoint->data->qmap && !endpoint->toward_ipa) {
-		val |= HDR_TOTAL_LEN_OR_PAD_VALID_FMASK;
-		/* HDR_TOTAL_LEN_OR_PAD is 0 (pad, not total_len) */
-		val |= HDR_PAYLOAD_LEN_INC_PADDING_FMASK;
-		/* HDR_TOTAL_LEN_OR_PAD_OFFSET is 0 */
+	if (endpoint->data->qmap) {
+		/* We have a header, so we must specify its endianness */
+		val |= HDR_ENDIANNESS_FMASK;	/* big endian */
+
+		/* A QMAP header contains a 6 bit pad field at offset 0.
+		 * The RMNet driver assumes this field is meaningful in
+		 * packets it receives, and assumes the header's payload
+		 * length includes that padding.  The RMNet driver does
+		 * *not* pad packets it sends, however, so the pad field
+		 * (although 0) should be ignored.
+		 */
+		if (!endpoint->toward_ipa) {
+			val |= HDR_TOTAL_LEN_OR_PAD_VALID_FMASK;
+			/* HDR_TOTAL_LEN_OR_PAD is 0 (pad, not total_len) */
+			val |= HDR_PAYLOAD_LEN_INC_PADDING_FMASK;
+			/* HDR_TOTAL_LEN_OR_PAD_OFFSET is 0 */
+		}
 	}
 
 	/* HDR_PAYLOAD_LEN_INC_PADDING is 0 */
@@ -738,8 +742,6 @@ static void ipa_endpoint_init_aggr(struct ipa_endpoint *endpoint)
 
 			close_eof = endpoint->data->rx.aggr_close_eof;
 			val |= aggr_sw_eof_active_encoded(version, close_eof);
-
-			/* AGGR_HARD_BYTE_LIMIT_ENABLE is 0 */
 		} else {
 			val |= u32_encode_bits(IPA_ENABLE_DEAGGR,
 					       AGGR_EN_FMASK);
-- 
2.35.1

[PATCH AUTOSEL 5.15 100/109] ARM: 9201/1: spectre-bhb: rely on linker to emit cross-section literal loads

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit ad12c2f1587c6ec9b52ff226f438955bfae6ad89 ]

The assembler does not permit 'LDR PC, <sym>' when the symbol lives in a
different section, which is why we have been relying on rather fragile
open-coded arithmetic to load the address of the vector_swi routine into
the program counter using a single LDR instruction in the SWI slot in
the vector table. The literal was moved to a different section to in
commit 19accfd373847 ("ARM: move vector stubs") to ensure that the
vector stubs page does not need to be mapped readable for user space,
which is the case for the vector page itself, as it carries the kuser
helpers as well.

So the cross-section literal load is open-coded, and this relies on the
address of vector_swi to be at the very start of the vector stubs page,
and we won't notice if we got it wrong until booting the kernel and see
it break. Fortunately, it was guaranteed to break, so this was fragile
but not problematic.

Now that we have added two other variants of the vector table, we have 3
occurrences of the same trick, and so the size of our ISA/compiler/CPU
validation space has tripled, in a way that may cause regressions to only
be observed once booting the image in question on a CPU that exercises a
particular vector table.

So let's switch to true cross section references, and let the linker fix
them up like it fixes up all the other cross section references in the
vector page.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/entry-armv.S | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 68261a83b7ad..01c5b3aee22f 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1069,10 +1069,15 @@ ENDPROC(vector_bhb_bpiall_\name)
 	.endm
 
 	.section .stubs, "ax", %progbits
-	@ This must be the first word
+	@ These need to remain at the start of the section so that
+	@ they are in range of the 'SWI' entries in the vector tables
+	@ located 4k down.
+.L__vector_swi:
 	.word	vector_swi
 #ifdef CONFIG_HARDEN_BRANCH_HISTORY
+.L__vector_bhb_loop8_swi:
 	.word	vector_bhb_loop8_swi
+.L__vector_bhb_bpiall_swi:
 	.word	vector_bhb_bpiall_swi
 #endif
 
@@ -1215,10 +1220,11 @@ vector_addrexcptn:
 	.globl	vector_fiq
 
 	.section .vectors, "ax", %progbits
-.L__vectors_start:
 	W(b)	vector_rst
 	W(b)	vector_und
-	W(ldr)	pc, .L__vectors_start + 0x1000
+ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_swi		)
+THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_swi		)
+	W(ldr)	pc, .
 	W(b)	vector_pabt
 	W(b)	vector_dabt
 	W(b)	vector_addrexcptn
@@ -1227,10 +1233,11 @@ vector_addrexcptn:
 
 #ifdef CONFIG_HARDEN_BRANCH_HISTORY
 	.section .vectors.bhb.loop8, "ax", %progbits
-.L__vectors_bhb_loop8_start:
 	W(b)	vector_rst
 	W(b)	vector_bhb_loop8_und
-	W(ldr)	pc, .L__vectors_bhb_loop8_start + 0x1004
+ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_bhb_loop8_swi	)
+THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_bhb_loop8_swi	)
+	W(ldr)	pc, .
 	W(b)	vector_bhb_loop8_pabt
 	W(b)	vector_bhb_loop8_dabt
 	W(b)	vector_addrexcptn
@@ -1238,10 +1245,11 @@ vector_addrexcptn:
 	W(b)	vector_bhb_loop8_fiq
 
 	.section .vectors.bhb.bpiall, "ax", %progbits
-.L__vectors_bhb_bpiall_start:
 	W(b)	vector_rst
 	W(b)	vector_bhb_bpiall_und
-	W(ldr)	pc, .L__vectors_bhb_bpiall_start + 0x1008
+ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_bhb_bpiall_swi	)
+THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_bhb_bpiall_swi	)
+	W(ldr)	pc, .
 	W(b)	vector_bhb_bpiall_pabt
 	W(b)	vector_bhb_bpiall_dabt
 	W(b)	vector_addrexcptn
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 100/109] ARM: 9201/1: spectre-bhb: rely on linker to emit cross-section literal loads

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit ad12c2f1587c6ec9b52ff226f438955bfae6ad89 ]

The assembler does not permit 'LDR PC, <sym>' when the symbol lives in a
different section, which is why we have been relying on rather fragile
open-coded arithmetic to load the address of the vector_swi routine into
the program counter using a single LDR instruction in the SWI slot in
the vector table. The literal was moved to a different section to in
commit 19accfd373847 ("ARM: move vector stubs") to ensure that the
vector stubs page does not need to be mapped readable for user space,
which is the case for the vector page itself, as it carries the kuser
helpers as well.

So the cross-section literal load is open-coded, and this relies on the
address of vector_swi to be at the very start of the vector stubs page,
and we won't notice if we got it wrong until booting the kernel and see
it break. Fortunately, it was guaranteed to break, so this was fragile
but not problematic.

Now that we have added two other variants of the vector table, we have 3
occurrences of the same trick, and so the size of our ISA/compiler/CPU
validation space has tripled, in a way that may cause regressions to only
be observed once booting the image in question on a CPU that exercises a
particular vector table.

So let's switch to true cross section references, and let the linker fix
them up like it fixes up all the other cross section references in the
vector page.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/entry-armv.S | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 68261a83b7ad..01c5b3aee22f 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1069,10 +1069,15 @@ ENDPROC(vector_bhb_bpiall_\name)
 	.endm
 
 	.section .stubs, "ax", %progbits
-	@ This must be the first word
+	@ These need to remain at the start of the section so that
+	@ they are in range of the 'SWI' entries in the vector tables
+	@ located 4k down.
+.L__vector_swi:
 	.word	vector_swi
 #ifdef CONFIG_HARDEN_BRANCH_HISTORY
+.L__vector_bhb_loop8_swi:
 	.word	vector_bhb_loop8_swi
+.L__vector_bhb_bpiall_swi:
 	.word	vector_bhb_bpiall_swi
 #endif
 
@@ -1215,10 +1220,11 @@ vector_addrexcptn:
 	.globl	vector_fiq
 
 	.section .vectors, "ax", %progbits
-.L__vectors_start:
 	W(b)	vector_rst
 	W(b)	vector_und
-	W(ldr)	pc, .L__vectors_start + 0x1000
+ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_swi		)
+THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_swi		)
+	W(ldr)	pc, .
 	W(b)	vector_pabt
 	W(b)	vector_dabt
 	W(b)	vector_addrexcptn
@@ -1227,10 +1233,11 @@ vector_addrexcptn:
 
 #ifdef CONFIG_HARDEN_BRANCH_HISTORY
 	.section .vectors.bhb.loop8, "ax", %progbits
-.L__vectors_bhb_loop8_start:
 	W(b)	vector_rst
 	W(b)	vector_bhb_loop8_und
-	W(ldr)	pc, .L__vectors_bhb_loop8_start + 0x1004
+ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_bhb_loop8_swi	)
+THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_bhb_loop8_swi	)
+	W(ldr)	pc, .
 	W(b)	vector_bhb_loop8_pabt
 	W(b)	vector_bhb_loop8_dabt
 	W(b)	vector_addrexcptn
@@ -1238,10 +1245,11 @@ vector_addrexcptn:
 	W(b)	vector_bhb_loop8_fiq
 
 	.section .vectors.bhb.bpiall, "ax", %progbits
-.L__vectors_bhb_bpiall_start:
 	W(b)	vector_rst
 	W(b)	vector_bhb_bpiall_und
-	W(ldr)	pc, .L__vectors_bhb_bpiall_start + 0x1008
+ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_bhb_bpiall_swi	)
+THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_bhb_bpiall_swi	)
+	W(ldr)	pc, .
 	W(b)	vector_bhb_bpiall_pabt
 	W(b)	vector_bhb_bpiall_dabt
 	W(b)	vector_addrexcptn
-- 
2.35.1

[PATCH AUTOSEL 5.15 101/109] m68k: atari: Make Atari ROM port I/O write macros return void

[Sasha Levin]

From: Geert Uytterhoeven <geert@linux-m68k.org>

[ Upstream commit 30b5e6ef4a32ea4985b99200e06d6660a69f9246 ]

The macros implementing Atari ROM port I/O writes do not cast away their
output, unlike similar implementations for other I/O buses.
When they are combined using conditional expressions in the definitions of
outb() and friends, this triggers sparse warnings like:

    drivers/net/appletalk/cops.c:382:17: error: incompatible types in conditional expression (different base types):
    drivers/net/appletalk/cops.c:382:17:    unsigned char
    drivers/net/appletalk/cops.c:382:17:    void

Fix this by adding casts to "void".

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/c15bedc83d90a14fffcd5b1b6bfb32b8a80282c5.1653057096.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/include/asm/raw_io.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/m68k/include/asm/raw_io.h b/arch/m68k/include/asm/raw_io.h
index 80eb2396d01e..3ba40bc1dfaa 100644
--- a/arch/m68k/include/asm/raw_io.h
+++ b/arch/m68k/include/asm/raw_io.h
@@ -80,14 +80,14 @@
 	({ u16 __v = le16_to_cpu(*(__force volatile u16 *) (addr)); __v; })
 
 #define rom_out_8(addr, b)	\
-	({u8 __maybe_unused __w, __v = (b);  u32 _addr = ((u32) (addr)); \
+	(void)({u8 __maybe_unused __w, __v = (b);  u32 _addr = ((u32) (addr)); \
 	__w = ((*(__force volatile u8 *)  ((_addr | 0x10000) + (__v<<1)))); })
 #define rom_out_be16(addr, w)	\
-	({u16 __maybe_unused __w, __v = (w); u32 _addr = ((u32) (addr)); \
+	(void)({u16 __maybe_unused __w, __v = (w); u32 _addr = ((u32) (addr)); \
 	__w = ((*(__force volatile u16 *) ((_addr & 0xFFFF0000UL) + ((__v & 0xFF)<<1)))); \
 	__w = ((*(__force volatile u16 *) ((_addr | 0x10000) + ((__v >> 8)<<1)))); })
 #define rom_out_le16(addr, w)	\
-	({u16 __maybe_unused __w, __v = (w); u32 _addr = ((u32) (addr)); \
+	(void)({u16 __maybe_unused __w, __v = (w); u32 _addr = ((u32) (addr)); \
 	__w = ((*(__force volatile u16 *) ((_addr & 0xFFFF0000UL) + ((__v >> 8)<<1)))); \
 	__w = ((*(__force volatile u16 *) ((_addr | 0x10000) + ((__v & 0xFF)<<1)))); })
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 102/109] hwmon: Make chip parameter for with_info API mandatory

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit ddaefa209c4ac791c1262e97c9b2d0440c8ef1d5 ]

Various attempts were made recently to "convert" the old
hwmon_device_register() API to devm_hwmon_device_register_with_info()
by just changing the function name without actually converting the
driver. Prevent this from happening by making the 'chip' parameter of
devm_hwmon_device_register_with_info() mandatory.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/hwmon/hwmon-kernel-api.rst |  2 +-
 drivers/hwmon/hwmon.c                    | 16 +++++++---------
 2 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/Documentation/hwmon/hwmon-kernel-api.rst b/Documentation/hwmon/hwmon-kernel-api.rst
index c41eb6108103..23f27fe78e37 100644
--- a/Documentation/hwmon/hwmon-kernel-api.rst
+++ b/Documentation/hwmon/hwmon-kernel-api.rst
@@ -72,7 +72,7 @@ hwmon_device_register_with_info is the most comprehensive and preferred means
 to register a hardware monitoring device. It creates the standard sysfs
 attributes in the hardware monitoring core, letting the driver focus on reading
 from and writing to the chip instead of having to bother with sysfs attributes.
-The parent device parameter cannot be NULL with non-NULL chip info. Its
+The parent device parameter as well as the chip parameter must not be NULL. Its
 parameters are described in more detail below.
 
 devm_hwmon_device_register_with_info is similar to
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index 3ae961986fc3..55237a5fc49a 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -854,11 +854,12 @@ EXPORT_SYMBOL_GPL(hwmon_device_register_with_groups);
 
 /**
  * hwmon_device_register_with_info - register w/ hwmon
- * @dev: the parent device
- * @name: hwmon name attribute
- * @drvdata: driver data to attach to created device
- * @chip: pointer to hwmon chip information
+ * @dev: the parent device (mandatory)
+ * @name: hwmon name attribute (mandatory)
+ * @drvdata: driver data to attach to created device (optional)
+ * @chip: pointer to hwmon chip information (mandatory)
  * @extra_groups: pointer to list of additional non-standard attribute groups
+ *	(optional)
  *
  * hwmon_device_unregister() must be called when the device is no
  * longer needed.
@@ -871,13 +872,10 @@ hwmon_device_register_with_info(struct device *dev, const char *name,
 				const struct hwmon_chip_info *chip,
 				const struct attribute_group **extra_groups)
 {
-	if (!name)
-		return ERR_PTR(-EINVAL);
-
-	if (chip && (!chip->ops || !chip->ops->is_visible || !chip->info))
+	if (!dev || !name || !chip)
 		return ERR_PTR(-EINVAL);
 
-	if (chip && !dev)
+	if (!chip->ops || !chip->ops->is_visible || !chip->info)
 		return ERR_PTR(-EINVAL);
 
 	return __hwmon_device_register(dev, name, drvdata, chip, extra_groups);
-- 
2.35.1

[PATCH AUTOSEL 5.15 103/109] rxrpc: Return an error to sendmsg if call failed

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 4ba68c5192554876bd8c3afd904e3064d2915341 ]

If at the end of rxrpc sendmsg() or rxrpc_kernel_send_data() the call that
was being given data was aborted remotely or otherwise failed, return an
error rather than returning the amount of data buffered for transmission.

The call (presumably) did not complete, so there's not much point
continuing with it.  AF_RXRPC considers it "complete" and so will be
unwilling to do anything else with it - and won't send a notification for
it, deeming the return from sendmsg sufficient.

Not returning an error causes afs to incorrectly handle a StoreData
operation that gets interrupted by a change of address due to NAT
reconfiguration.

This doesn't normally affect most operations since their request parameters
tend to fit into a single UDP packet and afs_make_call() returns before the
server responds; StoreData is different as it involves transmission of a
lot of data.

This can be triggered on a client by doing something like:

	dd if=/dev/zero of=/afs/example.com/foo bs=1M count=512

at one prompt, and then changing the network address at another prompt,
e.g.:

	ifconfig enp6s0 inet 192.168.6.2 && route add 192.168.6.1 dev enp6s0

Tracing packets on an Auristor fileserver looks something like:

192.168.6.1 -> 192.168.6.3  RX 107 ACK Idle  Seq: 0  Call: 4  Source Port: 7000  Destination Port: 7001
192.168.6.3 -> 192.168.6.1  AFS (RX) 1482 FS Request: Unknown(64538) (64538)
192.168.6.3 -> 192.168.6.1  AFS (RX) 1482 FS Request: Unknown(64538) (64538)
192.168.6.1 -> 192.168.6.3  RX 107 ACK Idle  Seq: 0  Call: 4  Source Port: 7000  Destination Port: 7001
<ARP exchange for 192.168.6.2>
192.168.6.2 -> 192.168.6.1  AFS (RX) 1482 FS Request: Unknown(0) (0)
192.168.6.2 -> 192.168.6.1  AFS (RX) 1482 FS Request: Unknown(0) (0)
192.168.6.1 -> 192.168.6.2  RX 107 ACK Exceeds Window  Seq: 0  Call: 4  Source Port: 7000  Destination Port: 7001
192.168.6.1 -> 192.168.6.2  RX 74 ABORT  Seq: 0  Call: 4  Source Port: 7000  Destination Port: 7001
192.168.6.1 -> 192.168.6.2  RX 74 ABORT  Seq: 29321  Call: 4  Source Port: 7000  Destination Port: 7001

The Auristor fileserver logs code -453 (RXGEN_SS_UNMARSHAL), but the abort
code received by kafs is -5 (RX_PROTOCOL_ERROR) as the rx layer sees the
condition and generates an abort first and the unmarshal error is a
consequence of that at the application layer.

Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-December/004810.html # v1
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rxrpc/sendmsg.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c
index af8ad6c30b9f..1d38e279e2ef 100644
--- a/net/rxrpc/sendmsg.c
+++ b/net/rxrpc/sendmsg.c
@@ -444,6 +444,12 @@ static int rxrpc_send_data(struct rxrpc_sock *rx,
 
 success:
 	ret = copied;
+	if (READ_ONCE(call->state) == RXRPC_CALL_COMPLETE) {
+		read_lock_bh(&call->state_lock);
+		if (call->error < 0)
+			ret = call->error;
+		read_unlock_bh(&call->state_lock);
+	}
 out:
 	call->tx_pending = skb;
 	_leave(" = %d", ret);
-- 
2.35.1

[PATCH AUTOSEL 5.15 104/109] rxrpc, afs: Fix selection of abort codes

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit de696c4784f0706884458893c5a6c39b3a3ff65c ]

The RX_USER_ABORT code should really only be used to indicate that the user
of the rxrpc service (ie. userspace) implicitly caused a call to be aborted
- for instance if the AF_RXRPC socket is closed whilst the call was in
progress.  (The user may also explicitly abort a call and specify the abort
code to use).

Change some of the points of generation to use other abort codes instead:

 (1) Abort the call with RXGEN_SS_UNMARSHAL or RXGEN_CC_UNMARSHAL if we see
     ENOMEM and EFAULT during received data delivery and abort with
     RX_CALL_DEAD in the default case.

 (2) Abort with RXGEN_SS_MARSHAL if we get ENOMEM whilst trying to send a
     reply.

 (3) Abort with RX_CALL_DEAD if we stop hearing from the peer if we had
     heard from the peer and abort with RX_CALL_TIMEOUT if we hadn't.

 (4) Abort with RX_CALL_DEAD if we try to disconnect a call that's not
     completed successfully or been aborted.

Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/rxrpc.c          | 8 +++++---
 net/rxrpc/call_event.c  | 4 ++--
 net/rxrpc/conn_object.c | 2 +-
 3 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/fs/afs/rxrpc.c b/fs/afs/rxrpc.c
index 23a1a92d64bb..a5434f3e57c6 100644
--- a/fs/afs/rxrpc.c
+++ b/fs/afs/rxrpc.c
@@ -537,6 +537,8 @@ static void afs_deliver_to_call(struct afs_call *call)
 		case -ENODATA:
 		case -EBADMSG:
 		case -EMSGSIZE:
+		case -ENOMEM:
+		case -EFAULT:
 			abort_code = RXGEN_CC_UNMARSHAL;
 			if (state != AFS_CALL_CL_AWAIT_REPLY)
 				abort_code = RXGEN_SS_UNMARSHAL;
@@ -544,7 +546,7 @@ static void afs_deliver_to_call(struct afs_call *call)
 						abort_code, ret, "KUM");
 			goto local_abort;
 		default:
-			abort_code = RX_USER_ABORT;
+			abort_code = RX_CALL_DEAD;
 			rxrpc_kernel_abort_call(call->net->socket, call->rxcall,
 						abort_code, ret, "KER");
 			goto local_abort;
@@ -836,7 +838,7 @@ void afs_send_empty_reply(struct afs_call *call)
 	case -ENOMEM:
 		_debug("oom");
 		rxrpc_kernel_abort_call(net->socket, call->rxcall,
-					RX_USER_ABORT, -ENOMEM, "KOO");
+					RXGEN_SS_MARSHAL, -ENOMEM, "KOO");
 		fallthrough;
 	default:
 		_leave(" [error]");
@@ -878,7 +880,7 @@ void afs_send_simple_reply(struct afs_call *call, const void *buf, size_t len)
 	if (n == -ENOMEM) {
 		_debug("oom");
 		rxrpc_kernel_abort_call(net->socket, call->rxcall,
-					RX_USER_ABORT, -ENOMEM, "KOO");
+					RXGEN_SS_MARSHAL, -ENOMEM, "KOO");
 	}
 	_leave(" [error]");
 }
diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c
index 22e05de5d1ca..e426f6831aab 100644
--- a/net/rxrpc/call_event.c
+++ b/net/rxrpc/call_event.c
@@ -377,9 +377,9 @@ void rxrpc_process_call(struct work_struct *work)
 		if (test_bit(RXRPC_CALL_RX_HEARD, &call->flags) &&
 		    (int)call->conn->hi_serial - (int)call->rx_serial > 0) {
 			trace_rxrpc_call_reset(call);
-			rxrpc_abort_call("EXP", call, 0, RX_USER_ABORT, -ECONNRESET);
+			rxrpc_abort_call("EXP", call, 0, RX_CALL_DEAD, -ECONNRESET);
 		} else {
-			rxrpc_abort_call("EXP", call, 0, RX_USER_ABORT, -ETIME);
+			rxrpc_abort_call("EXP", call, 0, RX_CALL_TIMEOUT, -ETIME);
 		}
 		set_bit(RXRPC_CALL_EV_ABORT, &call->events);
 		goto recheck_state;
diff --git a/net/rxrpc/conn_object.c b/net/rxrpc/conn_object.c
index b2159dbf5412..660cd9b1a465 100644
--- a/net/rxrpc/conn_object.c
+++ b/net/rxrpc/conn_object.c
@@ -183,7 +183,7 @@ void __rxrpc_disconnect_call(struct rxrpc_connection *conn,
 			chan->last_type = RXRPC_PACKET_TYPE_ABORT;
 			break;
 		default:
-			chan->last_abort = RX_USER_ABORT;
+			chan->last_abort = RX_CALL_DEAD;
 			chan->last_type = RXRPC_PACKET_TYPE_ABORT;
 			break;
 		}
-- 
2.35.1

[PATCH AUTOSEL 5.15 105/109] afs: Adjust ACK interpretation to try and cope with NAT

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit adc9613ff66c26ebaff9814973181ac178beb90b ]

If a client's address changes, say if it is NAT'd, this can disrupt an in
progress operation.  For most operations, this is not much of a problem,
but StoreData can be different as some servers modify the target file as
the data comes in, so if a store request is disrupted, the file can get
corrupted on the server.

The problem is that the server doesn't recognise packets that come after
the change of address as belonging to the original client and will bounce
them, either by sending an OUT_OF_SEQUENCE ACK to the apparent new call if
the packet number falls within the initial sequence number window of a call
or by sending an EXCEEDS_WINDOW ACK if it falls outside and then aborting
it.  In both cases, firstPacket will be 1 and previousPacket will be 0 in
the ACK information.

Fix this by the following means:

 (1) If a client call receives an EXCEEDS_WINDOW ACK with firstPacket as 1
     and previousPacket as 0, assume this indicates that the server saw the
     incoming packets from a different peer and thus as a different call.
     Fail the call with error -ENETRESET.

 (2) Also fail the call if a similar OUT_OF_SEQUENCE ACK occurs if the
     first packet has been hard-ACK'd.  If it hasn't been hard-ACK'd, the
     ACK packet will cause it to get retransmitted, so the call will just
     be repeated.

 (3) Make afs_select_fileserver() treat -ENETRESET as a straight fail of
     the operation.

 (4) Prioritise the error code over things like -ECONNRESET as the server
     did actually respond.

 (5) Make writeback treat -ENETRESET as a retryable error and make it
     redirty all the pages involved in a write so that the VM will retry.

Note that there is still a circumstance that I can't easily deal with: if
the operation is fully received and processed by the server, but the reply
is lost due to address change.  There's no way to know if the op happened.
We can examine the server, but a conflicting change could have been made by
a third party - and we can't tell the difference.  In such a case, a
message like:

    kAFS: vnode modified {100058:146266} b7->b8 YFS.StoreData64 (op=2646a)

will be logged to dmesg on the next op to touch the file and the client
will reset the inode state, including invalidating clean parts of the
pagecache.

Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-December/004811.html # v1
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/misc.c     |  5 ++++-
 fs/afs/rotate.c   |  4 ++++
 fs/afs/write.c    |  1 +
 net/rxrpc/input.c | 27 +++++++++++++++++++++++++++
 4 files changed, 36 insertions(+), 1 deletion(-)

diff --git a/fs/afs/misc.c b/fs/afs/misc.c
index 1d1a8debe472..933e67fcdab1 100644
--- a/fs/afs/misc.c
+++ b/fs/afs/misc.c
@@ -163,8 +163,11 @@ void afs_prioritise_error(struct afs_error *e, int error, u32 abort_code)
 		return;
 
 	case -ECONNABORTED:
+		error = afs_abort_to_error(abort_code);
+		fallthrough;
+	case -ENETRESET: /* Responded, but we seem to have changed address */
 		e->responded = true;
-		e->error = afs_abort_to_error(abort_code);
+		e->error = error;
 		return;
 	}
 }
diff --git a/fs/afs/rotate.c b/fs/afs/rotate.c
index 79e1a5f6701b..a840c3588ebb 100644
--- a/fs/afs/rotate.c
+++ b/fs/afs/rotate.c
@@ -292,6 +292,10 @@ bool afs_select_fileserver(struct afs_operation *op)
 		op->error = error;
 		goto iterate_address;
 
+	case -ENETRESET:
+		pr_warn("kAFS: Peer reset %s (op=%x)\n",
+			op->type ? op->type->name : "???", op->debug_id);
+		fallthrough;
 	case -ECONNRESET:
 		_debug("call reset");
 		op->error = error;
diff --git a/fs/afs/write.c b/fs/afs/write.c
index f24370f5c774..a75c4742062a 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -626,6 +626,7 @@ static ssize_t afs_write_back_from_locked_page(struct address_space *mapping,
 	case -EKEYEXPIRED:
 	case -EKEYREJECTED:
 	case -EKEYREVOKED:
+	case -ENETRESET:
 		afs_redirty_pages(wbc, mapping, start, len);
 		mapping_set_error(mapping, ret);
 		break;
diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c
index dc201363f2c4..67d3eba60dc7 100644
--- a/net/rxrpc/input.c
+++ b/net/rxrpc/input.c
@@ -903,6 +903,33 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb)
 				  rxrpc_propose_ack_respond_to_ack);
 	}
 
+	/* If we get an EXCEEDS_WINDOW ACK from the server, it probably
+	 * indicates that the client address changed due to NAT.  The server
+	 * lost the call because it switched to a different peer.
+	 */
+	if (unlikely(buf.ack.reason == RXRPC_ACK_EXCEEDS_WINDOW) &&
+	    first_soft_ack == 1 &&
+	    prev_pkt == 0 &&
+	    rxrpc_is_client_call(call)) {
+		rxrpc_set_call_completion(call, RXRPC_CALL_REMOTELY_ABORTED,
+					  0, -ENETRESET);
+		return;
+	}
+
+	/* If we get an OUT_OF_SEQUENCE ACK from the server, that can also
+	 * indicate a change of address.  However, we can retransmit the call
+	 * if we still have it buffered to the beginning.
+	 */
+	if (unlikely(buf.ack.reason == RXRPC_ACK_OUT_OF_SEQUENCE) &&
+	    first_soft_ack == 1 &&
+	    prev_pkt == 0 &&
+	    call->tx_hard_ack == 0 &&
+	    rxrpc_is_client_call(call)) {
+		rxrpc_set_call_completion(call, RXRPC_CALL_REMOTELY_ABORTED,
+					  0, -ENETRESET);
+		return;
+	}
+
 	/* Discard any out-of-order or duplicate ACKs (outside lock). */
 	if (!rxrpc_is_ack_valid(call, first_soft_ack, prev_pkt)) {
 		trace_rxrpc_rx_discard_ack(call->debug_id, ack_serial,
-- 
2.35.1

[PATCH AUTOSEL 5.15 106/109] eth: tg3: silence the GCC 12 array-bounds warning

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 9dec850fd7c210a04b4707df8e6c95bfafdd6a4b ]

GCC 12 currently generates a rather inconsistent warning:

drivers/net/ethernet/broadcom/tg3.c:17795:51: warning: array subscript 5 is above array bounds of ‘struct tg3_napi[5]’ [-Warray-bounds]
17795 |                 struct tg3_napi *tnapi = &tp->napi[i];
      |                                           ~~~~~~~~^~~

i is guaranteed < tp->irq_max which in turn is either 1 or 5.
There are more loops like this one in the driver, but strangely
GCC 12 dislikes only this single one.

Silence this silliness for now.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/Makefile | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/Makefile b/drivers/net/ethernet/broadcom/Makefile
index 0ddfb5b5d53c..2e6c5f258a1f 100644
--- a/drivers/net/ethernet/broadcom/Makefile
+++ b/drivers/net/ethernet/broadcom/Makefile
@@ -17,3 +17,8 @@ obj-$(CONFIG_BGMAC_BCMA) += bgmac-bcma.o bgmac-bcma-mdio.o
 obj-$(CONFIG_BGMAC_PLATFORM) += bgmac-platform.o
 obj-$(CONFIG_SYSTEMPORT) += bcmsysport.o
 obj-$(CONFIG_BNXT) += bnxt/
+
+# FIXME: temporarily silence -Warray-bounds on non W=1+ builds
+ifndef KBUILD_EXTRA_WARN
+CFLAGS_tg3.o += -Wno-array-bounds
+endif
-- 
2.35.1

[PATCH AUTOSEL 5.15 107/109] char: tpm: cr50_i2c: Suppress duplicated error message in .remove()

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit e0687fe958f763f1790f22ed5483025b7624e744 ]

Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.

As tpm_cr50_i2c_remove() emits an error message already and the
additional error message by the i2c core doesn't add any useful
information, change the return value to zero to suppress this error
message.

Note that if i2c_clientdata is NULL, there is something really fishy.
Assuming no memory corruption happened (then all bets are lost anyhow),
tpm_cr50_i2c_remove() is only called after tpm_cr50_i2c_probe() returned
successfully. So there was a tpm chip registered before and after
tpm_cr50_i2c_remove() its privdata is freed but the associated character
device isn't removed. If after that happened userspace accesses the
character device it's likely that the freed memory is accessed. For that
reason the warning message is made a bit more frightening.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/tpm/tpm_tis_i2c_cr50.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
index c89278103703..e2ab6a329732 100644
--- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
+++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
@@ -754,8 +754,8 @@ static int tpm_cr50_i2c_remove(struct i2c_client *client)
 	struct device *dev = &client->dev;
 
 	if (!chip) {
-		dev_err(dev, "Could not get client data at remove\n");
-		return -ENODEV;
+		dev_crit(dev, "Could not get client data at remove, memory corruption ahead\n");
+		return 0;
 	}
 
 	tpm_chip_unregister(chip);
-- 
2.35.1

[PATCH AUTOSEL 5.15 108/109] selftests/bpf: fix btf_dump/btf_dump due to recent clang change

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit 4050764cbaa25760aab40857f723393c07898474 ]

Latest llvm-project upstream had a change of behavior
related to qualifiers on function return type ([1]).
This caused selftests btf_dump/btf_dump failure.
The following example shows what changed.

  $ cat t.c
  typedef const char * const (* const (* const fn_ptr_arr2_t[5])())(char * (*)(int));
  struct t {
    int a;
    fn_ptr_arr2_t l;
  };
  int foo(struct t *arg) {
    return arg->a;
  }

Compiled with latest upstream llvm15,
  $ clang -O2 -g -target bpf -S -emit-llvm t.c
The related generated debuginfo IR looks like:
  !16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17)
  !17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !32)
  !18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19)
  !19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64)
  !20 = !DISubroutineType(types: !21)
  !21 = !{!22, null}
  !22 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !23, size: 64)
  !23 = !DISubroutineType(types: !24)
  !24 = !{!25, !28}
  !25 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !26, size: 64)
  !26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27)
  !27 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char)
You can see two intermediate const qualifier to pointer are dropped in debuginfo IR.

With llvm14, we have following debuginfo IR:
  !16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17)
  !17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !34)
  !18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19)
  !19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64)
  !20 = !DISubroutineType(types: !21)
  !21 = !{!22, null}
  !22 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !23)
  !23 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !24, size: 64)
  !24 = !DISubroutineType(types: !25)
  !25 = !{!26, !30}
  !26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27)
  !27 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !28, size: 64)
  !28 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !29)
  !29 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char)
All const qualifiers are preserved.

To adapt the selftest to both old and new llvm, this patch removed
the intermediate const qualifier in const-to-ptr types, to make the
test succeed again.

  [1] https://reviews.llvm.org/D125919

Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220523152044.3905809-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c
index 8aaa24a00322..970598dda732 100644
--- a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c
+++ b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c
@@ -94,7 +94,7 @@ typedef void (* (*signal_t)(int, void (*)(int)))(int);
 
 typedef char * (*fn_ptr_arr1_t[10])(int **);
 
-typedef char * (* const (* const fn_ptr_arr2_t[5])())(char * (*)(int));
+typedef char * (* (* const fn_ptr_arr2_t[5])())(char * (*)(int));
 
 struct struct_w_typedefs {
 	int_t a;
-- 
2.35.1

[PATCH AUTOSEL 5.15 109/109] gfs2: use i_lock spin_lock for inode qadata

[Sasha Levin]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit 5fcff61eea9efd1f4b60e89d2d686b5feaea100f ]

Before this patch, functions gfs2_qa_get and _put used the i_rw_mutex to
prevent simultaneous access to its i_qadata. But i_rw_mutex is now used
for many other things, including iomap_begin and end, which causes a
conflict according to lockdep. We cannot just remove the lock since
simultaneous opens (gfs2_open -> gfs2_open_common -> gfs2_qa_get) can
then stomp on each others values for i_qadata.

This patch solves the conflict by using the i_lock spin_lock in the inode
to prevent simultaneous access.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/quota.c | 32 ++++++++++++++++++++------------
 1 file changed, 20 insertions(+), 12 deletions(-)

diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index be0997e24d60..dc77080a82bb 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -531,34 +531,42 @@ static void qdsb_put(struct gfs2_quota_data *qd)
  */
 int gfs2_qa_get(struct gfs2_inode *ip)
 {
-	int error = 0;
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+	struct inode *inode = &ip->i_inode;
 
 	if (sdp->sd_args.ar_quota == GFS2_QUOTA_OFF)
 		return 0;
 
-	down_write(&ip->i_rw_mutex);
+	spin_lock(&inode->i_lock);
 	if (ip->i_qadata == NULL) {
-		ip->i_qadata = kmem_cache_zalloc(gfs2_qadata_cachep, GFP_NOFS);
-		if (!ip->i_qadata) {
-			error = -ENOMEM;
-			goto out;
-		}
+		struct gfs2_qadata *tmp;
+
+		spin_unlock(&inode->i_lock);
+		tmp = kmem_cache_zalloc(gfs2_qadata_cachep, GFP_NOFS);
+		if (!tmp)
+			return -ENOMEM;
+
+		spin_lock(&inode->i_lock);
+		if (ip->i_qadata == NULL)
+			ip->i_qadata = tmp;
+		else
+			kmem_cache_free(gfs2_qadata_cachep, tmp);
 	}
 	ip->i_qadata->qa_ref++;
-out:
-	up_write(&ip->i_rw_mutex);
-	return error;
+	spin_unlock(&inode->i_lock);
+	return 0;
 }
 
 void gfs2_qa_put(struct gfs2_inode *ip)
 {
-	down_write(&ip->i_rw_mutex);
+	struct inode *inode = &ip->i_inode;
+
+	spin_lock(&inode->i_lock);
 	if (ip->i_qadata && --ip->i_qadata->qa_ref == 0) {
 		kmem_cache_free(gfs2_qadata_cachep, ip->i_qadata);
 		ip->i_qadata = NULL;
 	}
-	up_write(&ip->i_rw_mutex);
+	spin_unlock(&inode->i_lock);
 }
 
 int gfs2_quota_hold(struct gfs2_inode *ip, kuid_t uid, kgid_t gid)
-- 
2.35.1

[Cluster-devel] [PATCH AUTOSEL 5.15 109/109] gfs2: use i_lock spin_lock for inode qadata

[Sasha Levin]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit 5fcff61eea9efd1f4b60e89d2d686b5feaea100f ]

Before this patch, functions gfs2_qa_get and _put used the i_rw_mutex to
prevent simultaneous access to its i_qadata. But i_rw_mutex is now used
for many other things, including iomap_begin and end, which causes a
conflict according to lockdep. We cannot just remove the lock since
simultaneous opens (gfs2_open -> gfs2_open_common -> gfs2_qa_get) can
then stomp on each others values for i_qadata.

This patch solves the conflict by using the i_lock spin_lock in the inode
to prevent simultaneous access.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/quota.c | 32 ++++++++++++++++++++------------
 1 file changed, 20 insertions(+), 12 deletions(-)

diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index be0997e24d60..dc77080a82bb 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -531,34 +531,42 @@ static void qdsb_put(struct gfs2_quota_data *qd)
  */
 int gfs2_qa_get(struct gfs2_inode *ip)
 {
-	int error = 0;
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+	struct inode *inode = &ip->i_inode;
 
 	if (sdp->sd_args.ar_quota == GFS2_QUOTA_OFF)
 		return 0;
 
-	down_write(&ip->i_rw_mutex);
+	spin_lock(&inode->i_lock);
 	if (ip->i_qadata == NULL) {
-		ip->i_qadata = kmem_cache_zalloc(gfs2_qadata_cachep, GFP_NOFS);
-		if (!ip->i_qadata) {
-			error = -ENOMEM;
-			goto out;
-		}
+		struct gfs2_qadata *tmp;
+
+		spin_unlock(&inode->i_lock);
+		tmp = kmem_cache_zalloc(gfs2_qadata_cachep, GFP_NOFS);
+		if (!tmp)
+			return -ENOMEM;
+
+		spin_lock(&inode->i_lock);
+		if (ip->i_qadata == NULL)
+			ip->i_qadata = tmp;
+		else
+			kmem_cache_free(gfs2_qadata_cachep, tmp);
 	}
 	ip->i_qadata->qa_ref++;
-out:
-	up_write(&ip->i_rw_mutex);
-	return error;
+	spin_unlock(&inode->i_lock);
+	return 0;
 }
 
 void gfs2_qa_put(struct gfs2_inode *ip)
 {
-	down_write(&ip->i_rw_mutex);
+	struct inode *inode = &ip->i_inode;
+
+	spin_lock(&inode->i_lock);
 	if (ip->i_qadata && --ip->i_qadata->qa_ref == 0) {
 		kmem_cache_free(gfs2_qadata_cachep, ip->i_qadata);
 		ip->i_qadata = NULL;
 	}
-	up_write(&ip->i_rw_mutex);
+	spin_unlock(&inode->i_lock);
 }
 
 int gfs2_quota_hold(struct gfs2_inode *ip, kuid_t uid, kgid_t gid)
-- 
2.35.1

Re: [PATCH AUTOSEL 5.15 100/109] ARM: 9201/1: spectre-bhb: rely on linker to emit cross-section literal loads

[Ard Biesheuvel]

AUTONAK

On Mon, 30 May 2022 at 15:43, Sasha Levin <sashal@kernel.org> wrote:
>
> From: Ard Biesheuvel <ardb@kernel.org>
>
> [ Upstream commit ad12c2f1587c6ec9b52ff226f438955bfae6ad89 ]
>
> The assembler does not permit 'LDR PC, <sym>' when the symbol lives in a
> different section, which is why we have been relying on rather fragile
> open-coded arithmetic to load the address of the vector_swi routine into
> the program counter using a single LDR instruction in the SWI slot in
> the vector table. The literal was moved to a different section to in
> commit 19accfd373847 ("ARM: move vector stubs") to ensure that the
> vector stubs page does not need to be mapped readable for user space,
> which is the case for the vector page itself, as it carries the kuser
> helpers as well.
>
> So the cross-section literal load is open-coded, and this relies on the
> address of vector_swi to be at the very start of the vector stubs page,
> and we won't notice if we got it wrong until booting the kernel and see
> it break. Fortunately, it was guaranteed to break, so this was fragile
> but not problematic.
>
> Now that we have added two other variants of the vector table, we have 3
> occurrences of the same trick, and so the size of our ISA/compiler/CPU
> validation space has tripled, in a way that may cause regressions to only
> be observed once booting the image in question on a CPU that exercises a
> particular vector table.
>
> So let's switch to true cross section references, and let the linker fix
> them up like it fixes up all the other cross section references in the
> vector page.
>
> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  arch/arm/kernel/entry-armv.S | 22 +++++++++++++++-------
>  1 file changed, 15 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
> index 68261a83b7ad..01c5b3aee22f 100644
> --- a/arch/arm/kernel/entry-armv.S
> +++ b/arch/arm/kernel/entry-armv.S
> @@ -1069,10 +1069,15 @@ ENDPROC(vector_bhb_bpiall_\name)
>         .endm
>
>         .section .stubs, "ax", %progbits
> -       @ This must be the first word
> +       @ These need to remain at the start of the section so that
> +       @ they are in range of the 'SWI' entries in the vector tables
> +       @ located 4k down.
> +.L__vector_swi:
>         .word   vector_swi
>  #ifdef CONFIG_HARDEN_BRANCH_HISTORY
> +.L__vector_bhb_loop8_swi:
>         .word   vector_bhb_loop8_swi
> +.L__vector_bhb_bpiall_swi:
>         .word   vector_bhb_bpiall_swi
>  #endif
>
> @@ -1215,10 +1220,11 @@ vector_addrexcptn:
>         .globl  vector_fiq
>
>         .section .vectors, "ax", %progbits
> -.L__vectors_start:
>         W(b)    vector_rst
>         W(b)    vector_und
> -       W(ldr)  pc, .L__vectors_start + 0x1000
> +ARM(   .reloc  ., R_ARM_LDR_PC_G0, .L__vector_swi              )
> +THUMB( .reloc  ., R_ARM_THM_PC12, .L__vector_swi               )
> +       W(ldr)  pc, .
>         W(b)    vector_pabt
>         W(b)    vector_dabt
>         W(b)    vector_addrexcptn
> @@ -1227,10 +1233,11 @@ vector_addrexcptn:
>
>  #ifdef CONFIG_HARDEN_BRANCH_HISTORY
>         .section .vectors.bhb.loop8, "ax", %progbits
> -.L__vectors_bhb_loop8_start:
>         W(b)    vector_rst
>         W(b)    vector_bhb_loop8_und
> -       W(ldr)  pc, .L__vectors_bhb_loop8_start + 0x1004
> +ARM(   .reloc  ., R_ARM_LDR_PC_G0, .L__vector_bhb_loop8_swi    )
> +THUMB( .reloc  ., R_ARM_THM_PC12, .L__vector_bhb_loop8_swi     )
> +       W(ldr)  pc, .
>         W(b)    vector_bhb_loop8_pabt
>         W(b)    vector_bhb_loop8_dabt
>         W(b)    vector_addrexcptn
> @@ -1238,10 +1245,11 @@ vector_addrexcptn:
>         W(b)    vector_bhb_loop8_fiq
>
>         .section .vectors.bhb.bpiall, "ax", %progbits
> -.L__vectors_bhb_bpiall_start:
>         W(b)    vector_rst
>         W(b)    vector_bhb_bpiall_und
> -       W(ldr)  pc, .L__vectors_bhb_bpiall_start + 0x1008
> +ARM(   .reloc  ., R_ARM_LDR_PC_G0, .L__vector_bhb_bpiall_swi   )
> +THUMB( .reloc  ., R_ARM_THM_PC12, .L__vector_bhb_bpiall_swi    )
> +       W(ldr)  pc, .
>         W(b)    vector_bhb_bpiall_pabt
>         W(b)    vector_bhb_bpiall_dabt
>         W(b)    vector_addrexcptn
> --
> 2.35.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.15 100/109] ARM: 9201/1: spectre-bhb: rely on linker to emit cross-section literal loads

[Ard Biesheuvel]

AUTONAK

On Mon, 30 May 2022 at 15:43, Sasha Levin <sashal@kernel.org> wrote:
>
> From: Ard Biesheuvel <ardb@kernel.org>
>
> [ Upstream commit ad12c2f1587c6ec9b52ff226f438955bfae6ad89 ]
>
> The assembler does not permit 'LDR PC, <sym>' when the symbol lives in a
> different section, which is why we have been relying on rather fragile
> open-coded arithmetic to load the address of the vector_swi routine into
> the program counter using a single LDR instruction in the SWI slot in
> the vector table. The literal was moved to a different section to in
> commit 19accfd373847 ("ARM: move vector stubs") to ensure that the
> vector stubs page does not need to be mapped readable for user space,
> which is the case for the vector page itself, as it carries the kuser
> helpers as well.
>
> So the cross-section literal load is open-coded, and this relies on the
> address of vector_swi to be at the very start of the vector stubs page,
> and we won't notice if we got it wrong until booting the kernel and see
> it break. Fortunately, it was guaranteed to break, so this was fragile
> but not problematic.
>
> Now that we have added two other variants of the vector table, we have 3
> occurrences of the same trick, and so the size of our ISA/compiler/CPU
> validation space has tripled, in a way that may cause regressions to only
> be observed once booting the image in question on a CPU that exercises a
> particular vector table.
>
> So let's switch to true cross section references, and let the linker fix
> them up like it fixes up all the other cross section references in the
> vector page.
>
> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  arch/arm/kernel/entry-armv.S | 22 +++++++++++++++-------
>  1 file changed, 15 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
> index 68261a83b7ad..01c5b3aee22f 100644
> --- a/arch/arm/kernel/entry-armv.S
> +++ b/arch/arm/kernel/entry-armv.S
> @@ -1069,10 +1069,15 @@ ENDPROC(vector_bhb_bpiall_\name)
>         .endm
>
>         .section .stubs, "ax", %progbits
> -       @ This must be the first word
> +       @ These need to remain at the start of the section so that
> +       @ they are in range of the 'SWI' entries in the vector tables
> +       @ located 4k down.
> +.L__vector_swi:
>         .word   vector_swi
>  #ifdef CONFIG_HARDEN_BRANCH_HISTORY
> +.L__vector_bhb_loop8_swi:
>         .word   vector_bhb_loop8_swi
> +.L__vector_bhb_bpiall_swi:
>         .word   vector_bhb_bpiall_swi
>  #endif
>
> @@ -1215,10 +1220,11 @@ vector_addrexcptn:
>         .globl  vector_fiq
>
>         .section .vectors, "ax", %progbits
> -.L__vectors_start:
>         W(b)    vector_rst
>         W(b)    vector_und
> -       W(ldr)  pc, .L__vectors_start + 0x1000
> +ARM(   .reloc  ., R_ARM_LDR_PC_G0, .L__vector_swi              )
> +THUMB( .reloc  ., R_ARM_THM_PC12, .L__vector_swi               )
> +       W(ldr)  pc, .
>         W(b)    vector_pabt
>         W(b)    vector_dabt
>         W(b)    vector_addrexcptn
> @@ -1227,10 +1233,11 @@ vector_addrexcptn:
>
>  #ifdef CONFIG_HARDEN_BRANCH_HISTORY
>         .section .vectors.bhb.loop8, "ax", %progbits
> -.L__vectors_bhb_loop8_start:
>         W(b)    vector_rst
>         W(b)    vector_bhb_loop8_und
> -       W(ldr)  pc, .L__vectors_bhb_loop8_start + 0x1004
> +ARM(   .reloc  ., R_ARM_LDR_PC_G0, .L__vector_bhb_loop8_swi    )
> +THUMB( .reloc  ., R_ARM_THM_PC12, .L__vector_bhb_loop8_swi     )
> +       W(ldr)  pc, .
>         W(b)    vector_bhb_loop8_pabt
>         W(b)    vector_bhb_loop8_dabt
>         W(b)    vector_addrexcptn
> @@ -1238,10 +1245,11 @@ vector_addrexcptn:
>         W(b)    vector_bhb_loop8_fiq
>
>         .section .vectors.bhb.bpiall, "ax", %progbits
> -.L__vectors_bhb_bpiall_start:
>         W(b)    vector_rst
>         W(b)    vector_bhb_bpiall_und
> -       W(ldr)  pc, .L__vectors_bhb_bpiall_start + 0x1008
> +ARM(   .reloc  ., R_ARM_LDR_PC_G0, .L__vector_bhb_bpiall_swi   )
> +THUMB( .reloc  ., R_ARM_THM_PC12, .L__vector_bhb_bpiall_swi    )
> +       W(ldr)  pc, .
>         W(b)    vector_bhb_bpiall_pabt
>         W(b)    vector_bhb_bpiall_dabt
>         W(b)    vector_addrexcptn
> --
> 2.35.1
>

Re: [PATCH AUTOSEL 5.15 102/109] hwmon: Make chip parameter for with_info API mandatory

[Guenter Roeck]

On 5/30/22 06:38, Sasha Levin wrote:
> From: Guenter Roeck <linux@roeck-us.net>
> 
> [ Upstream commit ddaefa209c4ac791c1262e97c9b2d0440c8ef1d5 ]
> 
> Various attempts were made recently to "convert" the old
> hwmon_device_register() API to devm_hwmon_device_register_with_info()
> by just changing the function name without actually converting the
> driver. Prevent this from happening by making the 'chip' parameter of
> devm_hwmon_device_register_with_info() mandatory.
> 
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Please drop.

> ---
>   Documentation/hwmon/hwmon-kernel-api.rst |  2 +-
>   drivers/hwmon/hwmon.c                    | 16 +++++++---------
>   2 files changed, 8 insertions(+), 10 deletions(-)
> 
> diff --git a/Documentation/hwmon/hwmon-kernel-api.rst b/Documentation/hwmon/hwmon-kernel-api.rst
> index c41eb6108103..23f27fe78e37 100644
> --- a/Documentation/hwmon/hwmon-kernel-api.rst
> +++ b/Documentation/hwmon/hwmon-kernel-api.rst
> @@ -72,7 +72,7 @@ hwmon_device_register_with_info is the most comprehensive and preferred means
>   to register a hardware monitoring device. It creates the standard sysfs
>   attributes in the hardware monitoring core, letting the driver focus on reading
>   from and writing to the chip instead of having to bother with sysfs attributes.
> -The parent device parameter cannot be NULL with non-NULL chip info. Its
> +The parent device parameter as well as the chip parameter must not be NULL. Its
>   parameters are described in more detail below.
>   
>   devm_hwmon_device_register_with_info is similar to
> diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
> index 3ae961986fc3..55237a5fc49a 100644
> --- a/drivers/hwmon/hwmon.c
> +++ b/drivers/hwmon/hwmon.c
> @@ -854,11 +854,12 @@ EXPORT_SYMBOL_GPL(hwmon_device_register_with_groups);
>   
>   /**
>    * hwmon_device_register_with_info - register w/ hwmon
> - * @dev: the parent device
> - * @name: hwmon name attribute
> - * @drvdata: driver data to attach to created device
> - * @chip: pointer to hwmon chip information
> + * @dev: the parent device (mandatory)
> + * @name: hwmon name attribute (mandatory)
> + * @drvdata: driver data to attach to created device (optional)
> + * @chip: pointer to hwmon chip information (mandatory)
>    * @extra_groups: pointer to list of additional non-standard attribute groups
> + *	(optional)
>    *
>    * hwmon_device_unregister() must be called when the device is no
>    * longer needed.
> @@ -871,13 +872,10 @@ hwmon_device_register_with_info(struct device *dev, const char *name,
>   				const struct hwmon_chip_info *chip,
>   				const struct attribute_group **extra_groups)
>   {
> -	if (!name)
> -		return ERR_PTR(-EINVAL);
> -
> -	if (chip && (!chip->ops || !chip->ops->is_visible || !chip->info))
> +	if (!dev || !name || !chip)
>   		return ERR_PTR(-EINVAL);
>   
> -	if (chip && !dev)
> +	if (!chip->ops || !chip->ops->is_visible || !chip->info)
>   		return ERR_PTR(-EINVAL);
>   
>   	return __hwmon_device_register(dev, name, drvdata, chip, extra_groups);