[PATCH v3 0/8] Add a panel API to return panel orientation

[PATCH v3 0/8] Add a panel API to return panel orientation

[Hsin-Yi Wang]

Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN()[1].

The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.

The series add a panel API drm_panel_get_orientation() for drm/kms
drivers. The drivers can use the API to get panel's orientation, so they
can call drm_connector_set_panel_orientation() before drm_dev_register().

Panel needs to implement .get_orientation callback to return the property.

[1] https://patchwork.kernel.org/project/linux-mediatek/patch/20220530081910.3947168-2-hsinyi@chromium.org/

Hsin-Yi Wang (8):
  drm/panel: Add an API drm_panel_get_orientation() to return panel
    orientation
  drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback
  drm/panel: panel-edp: Implement .get_orientation callback
  drm/panel: lvds: Implement .get_orientation callback
  drm/panel: panel-simple: Implement .get_orientation callback
  drm/panel: ili9881c: Implement .get_orientation callback
  drm/panel: elida-kd35t133: Implement .get_orientation callback
  drm/mediatek: Config orientation property if panel provides it

 drivers/gpu/drm/drm_panel.c                    |  8 ++++++++
 drivers/gpu/drm/mediatek/mtk_dsi.c             | 10 ++++++++++
 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-edp.c              | 15 ++++++++++++++-
 drivers/gpu/drm/panel/panel-elida-kd35t133.c   | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-ilitek-ili9881c.c  | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-lvds.c             | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c           | 16 +++++++++++++++-
 include/drm/drm_panel.h                        | 10 ++++++++++
 9 files changed, 113 insertions(+), 2 deletions(-)

-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 0/8] Add a panel API to return panel orientation

[Hsin-Yi Wang]

Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN()[1].

The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.

The series add a panel API drm_panel_get_orientation() for drm/kms
drivers. The drivers can use the API to get panel's orientation, so they
can call drm_connector_set_panel_orientation() before drm_dev_register().

Panel needs to implement .get_orientation callback to return the property.

[1] https://patchwork.kernel.org/project/linux-mediatek/patch/20220530081910.3947168-2-hsinyi@chromium.org/

Hsin-Yi Wang (8):
  drm/panel: Add an API drm_panel_get_orientation() to return panel
    orientation
  drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback
  drm/panel: panel-edp: Implement .get_orientation callback
  drm/panel: lvds: Implement .get_orientation callback
  drm/panel: panel-simple: Implement .get_orientation callback
  drm/panel: ili9881c: Implement .get_orientation callback
  drm/panel: elida-kd35t133: Implement .get_orientation callback
  drm/mediatek: Config orientation property if panel provides it

 drivers/gpu/drm/drm_panel.c                    |  8 ++++++++
 drivers/gpu/drm/mediatek/mtk_dsi.c             | 10 ++++++++++
 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-edp.c              | 15 ++++++++++++++-
 drivers/gpu/drm/panel/panel-elida-kd35t133.c   | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-ilitek-ili9881c.c  | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-lvds.c             | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c           | 16 +++++++++++++++-
 include/drm/drm_panel.h                        | 10 ++++++++++
 9 files changed, 113 insertions(+), 2 deletions(-)

-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v3 0/8] Add a panel API to return panel orientation

[Hsin-Yi Wang]

Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN()[1].

The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.

The series add a panel API drm_panel_get_orientation() for drm/kms
drivers. The drivers can use the API to get panel's orientation, so they
can call drm_connector_set_panel_orientation() before drm_dev_register().

Panel needs to implement .get_orientation callback to return the property.

[1] https://patchwork.kernel.org/project/linux-mediatek/patch/20220530081910.3947168-2-hsinyi@chromium.org/

Hsin-Yi Wang (8):
  drm/panel: Add an API drm_panel_get_orientation() to return panel
    orientation
  drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback
  drm/panel: panel-edp: Implement .get_orientation callback
  drm/panel: lvds: Implement .get_orientation callback
  drm/panel: panel-simple: Implement .get_orientation callback
  drm/panel: ili9881c: Implement .get_orientation callback
  drm/panel: elida-kd35t133: Implement .get_orientation callback
  drm/mediatek: Config orientation property if panel provides it

 drivers/gpu/drm/drm_panel.c                    |  8 ++++++++
 drivers/gpu/drm/mediatek/mtk_dsi.c             | 10 ++++++++++
 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-edp.c              | 15 ++++++++++++++-
 drivers/gpu/drm/panel/panel-elida-kd35t133.c   | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-ilitek-ili9881c.c  | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-lvds.c             | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c           | 16 +++++++++++++++-
 include/drm/drm_panel.h                        | 10 ++++++++++
 9 files changed, 113 insertions(+), 2 deletions(-)

-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 0/8] Add a panel API to return panel orientation

[Hsin-Yi Wang]

Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN()[1].

The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.

The series add a panel API drm_panel_get_orientation() for drm/kms
drivers. The drivers can use the API to get panel's orientation, so they
can call drm_connector_set_panel_orientation() before drm_dev_register().

Panel needs to implement .get_orientation callback to return the property.

[1] https://patchwork.kernel.org/project/linux-mediatek/patch/20220530081910.3947168-2-hsinyi@chromium.org/

Hsin-Yi Wang (8):
  drm/panel: Add an API drm_panel_get_orientation() to return panel
    orientation
  drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback
  drm/panel: panel-edp: Implement .get_orientation callback
  drm/panel: lvds: Implement .get_orientation callback
  drm/panel: panel-simple: Implement .get_orientation callback
  drm/panel: ili9881c: Implement .get_orientation callback
  drm/panel: elida-kd35t133: Implement .get_orientation callback
  drm/mediatek: Config orientation property if panel provides it

 drivers/gpu/drm/drm_panel.c                    |  8 ++++++++
 drivers/gpu/drm/mediatek/mtk_dsi.c             | 10 ++++++++++
 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-edp.c              | 15 ++++++++++++++-
 drivers/gpu/drm/panel/panel-elida-kd35t133.c   | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-ilitek-ili9881c.c  | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-lvds.c             | 14 ++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c           | 16 +++++++++++++++-
 include/drm/drm_panel.h                        | 10 ++++++++++
 9 files changed, 113 insertions(+), 2 deletions(-)

-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 1/8] drm/panel: Add an API drm_panel_get_orientation() to return panel orientation

[Hsin-Yi Wang]

Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN().

The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.

Add an API to return the property from panel to drm/kms driver, so the
drivers are able to call drm_connector_set_panel_orientation() before
drm_dev_register().

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: no change
---
 drivers/gpu/drm/drm_panel.c |  8 ++++++++
 include/drm/drm_panel.h     | 10 ++++++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index f634371c717a..4a512ca80673 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -223,6 +223,14 @@ int drm_panel_get_modes(struct drm_panel *panel,
 }
 EXPORT_SYMBOL(drm_panel_get_modes);
 
+enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->get_orientation)
+		return panel->funcs->get_orientation(panel);
+
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_panel_get_orientation);
 #ifdef CONFIG_OF
 /**
  * of_drm_find_panel - look up a panel using a device tree node
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index 1ba2d424a53f..d1bd3be4bbdf 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -133,6 +133,15 @@ struct drm_panel_funcs {
 	 * Allows panels to create panels-specific debugfs files.
 	 */
 	void (*debugfs_init)(struct drm_panel *panel, struct dentry *root);
+
+	/**
+	 * @get_orientation:
+	 *
+	 * Return the panel orientation set by device tree or EDID.
+	 *
+	 * This function is optional.
+	 */
+	enum drm_panel_orientation (*get_orientation)(struct drm_panel *panel);
 };
 
 /**
@@ -195,6 +204,7 @@ int drm_panel_enable(struct drm_panel *panel);
 int drm_panel_disable(struct drm_panel *panel);
 
 int drm_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector);
+enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel);
 
 #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
 struct drm_panel *of_drm_find_panel(const struct device_node *np);
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 1/8] drm/panel: Add an API drm_panel_get_orientation() to return panel orientation

[Hsin-Yi Wang]

Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN().

The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.

Add an API to return the property from panel to drm/kms driver, so the
drivers are able to call drm_connector_set_panel_orientation() before
drm_dev_register().

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: no change
---
 drivers/gpu/drm/drm_panel.c |  8 ++++++++
 include/drm/drm_panel.h     | 10 ++++++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index f634371c717a..4a512ca80673 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -223,6 +223,14 @@ int drm_panel_get_modes(struct drm_panel *panel,
 }
 EXPORT_SYMBOL(drm_panel_get_modes);
 
+enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->get_orientation)
+		return panel->funcs->get_orientation(panel);
+
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_panel_get_orientation);
 #ifdef CONFIG_OF
 /**
  * of_drm_find_panel - look up a panel using a device tree node
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index 1ba2d424a53f..d1bd3be4bbdf 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -133,6 +133,15 @@ struct drm_panel_funcs {
 	 * Allows panels to create panels-specific debugfs files.
 	 */
 	void (*debugfs_init)(struct drm_panel *panel, struct dentry *root);
+
+	/**
+	 * @get_orientation:
+	 *
+	 * Return the panel orientation set by device tree or EDID.
+	 *
+	 * This function is optional.
+	 */
+	enum drm_panel_orientation (*get_orientation)(struct drm_panel *panel);
 };
 
 /**
@@ -195,6 +204,7 @@ int drm_panel_enable(struct drm_panel *panel);
 int drm_panel_disable(struct drm_panel *panel);
 
 int drm_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector);
+enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel);
 
 #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
 struct drm_panel *of_drm_find_panel(const struct device_node *np);
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v3 1/8] drm/panel: Add an API drm_panel_get_orientation() to return panel orientation

[Hsin-Yi Wang]

Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN().

The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.

Add an API to return the property from panel to drm/kms driver, so the
drivers are able to call drm_connector_set_panel_orientation() before
drm_dev_register().

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: no change
---
 drivers/gpu/drm/drm_panel.c |  8 ++++++++
 include/drm/drm_panel.h     | 10 ++++++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index f634371c717a..4a512ca80673 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -223,6 +223,14 @@ int drm_panel_get_modes(struct drm_panel *panel,
 }
 EXPORT_SYMBOL(drm_panel_get_modes);
 
+enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->get_orientation)
+		return panel->funcs->get_orientation(panel);
+
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_panel_get_orientation);
 #ifdef CONFIG_OF
 /**
  * of_drm_find_panel - look up a panel using a device tree node
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index 1ba2d424a53f..d1bd3be4bbdf 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -133,6 +133,15 @@ struct drm_panel_funcs {
 	 * Allows panels to create panels-specific debugfs files.
 	 */
 	void (*debugfs_init)(struct drm_panel *panel, struct dentry *root);
+
+	/**
+	 * @get_orientation:
+	 *
+	 * Return the panel orientation set by device tree or EDID.
+	 *
+	 * This function is optional.
+	 */
+	enum drm_panel_orientation (*get_orientation)(struct drm_panel *panel);
 };
 
 /**
@@ -195,6 +204,7 @@ int drm_panel_enable(struct drm_panel *panel);
 int drm_panel_disable(struct drm_panel *panel);
 
 int drm_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector);
+enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel);
 
 #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
 struct drm_panel *of_drm_find_panel(const struct device_node *np);
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/8] drm/panel: Add an API drm_panel_get_orientation() to return panel orientation

[Hsin-Yi Wang]

Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN().

The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.

Add an API to return the property from panel to drm/kms driver, so the
drivers are able to call drm_connector_set_panel_orientation() before
drm_dev_register().

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: no change
---
 drivers/gpu/drm/drm_panel.c |  8 ++++++++
 include/drm/drm_panel.h     | 10 ++++++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index f634371c717a..4a512ca80673 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -223,6 +223,14 @@ int drm_panel_get_modes(struct drm_panel *panel,
 }
 EXPORT_SYMBOL(drm_panel_get_modes);
 
+enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->get_orientation)
+		return panel->funcs->get_orientation(panel);
+
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_panel_get_orientation);
 #ifdef CONFIG_OF
 /**
  * of_drm_find_panel - look up a panel using a device tree node
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index 1ba2d424a53f..d1bd3be4bbdf 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -133,6 +133,15 @@ struct drm_panel_funcs {
 	 * Allows panels to create panels-specific debugfs files.
 	 */
 	void (*debugfs_init)(struct drm_panel *panel, struct dentry *root);
+
+	/**
+	 * @get_orientation:
+	 *
+	 * Return the panel orientation set by device tree or EDID.
+	 *
+	 * This function is optional.
+	 */
+	enum drm_panel_orientation (*get_orientation)(struct drm_panel *panel);
 };
 
 /**
@@ -195,6 +204,7 @@ int drm_panel_enable(struct drm_panel *panel);
 int drm_panel_disable(struct drm_panel *panel);
 
 int drm_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector);
+enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel);
 
 #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
 struct drm_panel *of_drm_find_panel(const struct device_node *np);
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 2/8] drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index 1be150ac758f..a9cd07234179 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -1511,16 +1511,30 @@ static int boe_panel_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = boe->desc->size.width_mm;
 	connector->display_info.height_mm = boe->desc->size.height_mm;
 	connector->display_info.bpc = boe->desc->bpc;
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, boe->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation boe_panel_get_orientation(struct drm_panel *panel)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+
+	return boe->orientation;
+}
+
 static const struct drm_panel_funcs boe_panel_funcs = {
 	.unprepare = boe_panel_unprepare,
 	.prepare = boe_panel_prepare,
 	.enable = boe_panel_enable,
 	.get_modes = boe_panel_get_modes,
+	.get_orientation = boe_panel_get_orientation,
 };
 
 static int boe_panel_add(struct boe_panel *boe)
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 2/8] drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index 1be150ac758f..a9cd07234179 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -1511,16 +1511,30 @@ static int boe_panel_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = boe->desc->size.width_mm;
 	connector->display_info.height_mm = boe->desc->size.height_mm;
 	connector->display_info.bpc = boe->desc->bpc;
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, boe->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation boe_panel_get_orientation(struct drm_panel *panel)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+
+	return boe->orientation;
+}
+
 static const struct drm_panel_funcs boe_panel_funcs = {
 	.unprepare = boe_panel_unprepare,
 	.prepare = boe_panel_prepare,
 	.enable = boe_panel_enable,
 	.get_modes = boe_panel_get_modes,
+	.get_orientation = boe_panel_get_orientation,
 };
 
 static int boe_panel_add(struct boe_panel *boe)
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v3 2/8] drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index 1be150ac758f..a9cd07234179 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -1511,16 +1511,30 @@ static int boe_panel_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = boe->desc->size.width_mm;
 	connector->display_info.height_mm = boe->desc->size.height_mm;
 	connector->display_info.bpc = boe->desc->bpc;
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, boe->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation boe_panel_get_orientation(struct drm_panel *panel)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+
+	return boe->orientation;
+}
+
 static const struct drm_panel_funcs boe_panel_funcs = {
 	.unprepare = boe_panel_unprepare,
 	.prepare = boe_panel_prepare,
 	.enable = boe_panel_enable,
 	.get_modes = boe_panel_get_modes,
+	.get_orientation = boe_panel_get_orientation,
 };
 
 static int boe_panel_add(struct boe_panel *boe)
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/8] drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index 1be150ac758f..a9cd07234179 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -1511,16 +1511,30 @@ static int boe_panel_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = boe->desc->size.width_mm;
 	connector->display_info.height_mm = boe->desc->size.height_mm;
 	connector->display_info.bpc = boe->desc->bpc;
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, boe->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation boe_panel_get_orientation(struct drm_panel *panel)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+
+	return boe->orientation;
+}
+
 static const struct drm_panel_funcs boe_panel_funcs = {
 	.unprepare = boe_panel_unprepare,
 	.prepare = boe_panel_prepare,
 	.enable = boe_panel_enable,
 	.get_modes = boe_panel_get_modes,
+	.get_orientation = boe_panel_get_orientation,
 };
 
 static int boe_panel_add(struct boe_panel *boe)
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 3/8] drm/panel: panel-edp: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-edp.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 1732b4f56e38..5fa208005395 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -586,7 +586,12 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 	else if (!num)
 		dev_warn(p->base.dev, "No display modes\n");
 
-	/* set up connector's "panel orientation" property */
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, p->orientation);
 
 	return num;
@@ -609,6 +614,13 @@ static int panel_edp_get_timings(struct drm_panel *panel,
 	return p->desc->num_timings;
 }
 
+static enum drm_panel_orientation panel_edp_get_orientation(struct drm_panel *panel)
+{
+	struct panel_edp *p = to_panel_edp(panel);
+
+       return p->orientation;
+}
+
 static int detected_panel_show(struct seq_file *s, void *data)
 {
 	struct drm_panel *panel = s->private;
@@ -637,6 +649,7 @@ static const struct drm_panel_funcs panel_edp_funcs = {
 	.prepare = panel_edp_prepare,
 	.enable = panel_edp_enable,
 	.get_modes = panel_edp_get_modes,
+	.get_orientation = panel_edp_get_orientation,
 	.get_timings = panel_edp_get_timings,
 	.debugfs_init = panel_edp_debugfs_init,
 };
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 3/8] drm/panel: panel-edp: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-edp.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 1732b4f56e38..5fa208005395 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -586,7 +586,12 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 	else if (!num)
 		dev_warn(p->base.dev, "No display modes\n");
 
-	/* set up connector's "panel orientation" property */
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, p->orientation);
 
 	return num;
@@ -609,6 +614,13 @@ static int panel_edp_get_timings(struct drm_panel *panel,
 	return p->desc->num_timings;
 }
 
+static enum drm_panel_orientation panel_edp_get_orientation(struct drm_panel *panel)
+{
+	struct panel_edp *p = to_panel_edp(panel);
+
+       return p->orientation;
+}
+
 static int detected_panel_show(struct seq_file *s, void *data)
 {
 	struct drm_panel *panel = s->private;
@@ -637,6 +649,7 @@ static const struct drm_panel_funcs panel_edp_funcs = {
 	.prepare = panel_edp_prepare,
 	.enable = panel_edp_enable,
 	.get_modes = panel_edp_get_modes,
+	.get_orientation = panel_edp_get_orientation,
 	.get_timings = panel_edp_get_timings,
 	.debugfs_init = panel_edp_debugfs_init,
 };
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v3 3/8] drm/panel: panel-edp: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-edp.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 1732b4f56e38..5fa208005395 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -586,7 +586,12 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 	else if (!num)
 		dev_warn(p->base.dev, "No display modes\n");
 
-	/* set up connector's "panel orientation" property */
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, p->orientation);
 
 	return num;
@@ -609,6 +614,13 @@ static int panel_edp_get_timings(struct drm_panel *panel,
 	return p->desc->num_timings;
 }
 
+static enum drm_panel_orientation panel_edp_get_orientation(struct drm_panel *panel)
+{
+	struct panel_edp *p = to_panel_edp(panel);
+
+       return p->orientation;
+}
+
 static int detected_panel_show(struct seq_file *s, void *data)
 {
 	struct drm_panel *panel = s->private;
@@ -637,6 +649,7 @@ static const struct drm_panel_funcs panel_edp_funcs = {
 	.prepare = panel_edp_prepare,
 	.enable = panel_edp_enable,
 	.get_modes = panel_edp_get_modes,
+	.get_orientation = panel_edp_get_orientation,
 	.get_timings = panel_edp_get_timings,
 	.debugfs_init = panel_edp_debugfs_init,
 };
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/8] drm/panel: panel-edp: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-edp.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 1732b4f56e38..5fa208005395 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -586,7 +586,12 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 	else if (!num)
 		dev_warn(p->base.dev, "No display modes\n");
 
-	/* set up connector's "panel orientation" property */
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, p->orientation);
 
 	return num;
@@ -609,6 +614,13 @@ static int panel_edp_get_timings(struct drm_panel *panel,
 	return p->desc->num_timings;
 }
 
+static enum drm_panel_orientation panel_edp_get_orientation(struct drm_panel *panel)
+{
+	struct panel_edp *p = to_panel_edp(panel);
+
+       return p->orientation;
+}
+
 static int detected_panel_show(struct seq_file *s, void *data)
 {
 	struct drm_panel *panel = s->private;
@@ -637,6 +649,7 @@ static const struct drm_panel_funcs panel_edp_funcs = {
 	.prepare = panel_edp_prepare,
 	.enable = panel_edp_enable,
 	.get_modes = panel_edp_get_modes,
+	.get_orientation = panel_edp_get_orientation,
 	.get_timings = panel_edp_get_timings,
 	.debugfs_init = panel_edp_debugfs_init,
 };
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 4/8] drm/panel: lvds: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-lvds.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
index 27a1c9923b09..239527409b00 100644
--- a/drivers/gpu/drm/panel/panel-lvds.c
+++ b/drivers/gpu/drm/panel/panel-lvds.c
@@ -102,15 +102,29 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
 	connector->display_info.bus_flags = lvds->data_mirror
 					  ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
 					  : DRM_BUS_FLAG_DATA_MSB_TO_LSB;
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, lvds->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation panel_lvds_get_orientation,(struct drm_panel *panel)
+{
+       struct panel_lvds *lvds = to_panel_lvds(panel);
+
+       return lvds->orientation;
+}
+
 static const struct drm_panel_funcs panel_lvds_funcs = {
 	.unprepare = panel_lvds_unprepare,
 	.prepare = panel_lvds_prepare,
 	.get_modes = panel_lvds_get_modes,
+	.get_orientation = panel_lvds_get_orientation,
 };
 
 static int panel_lvds_parse_dt(struct panel_lvds *lvds)
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 4/8] drm/panel: lvds: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-lvds.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
index 27a1c9923b09..239527409b00 100644
--- a/drivers/gpu/drm/panel/panel-lvds.c
+++ b/drivers/gpu/drm/panel/panel-lvds.c
@@ -102,15 +102,29 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
 	connector->display_info.bus_flags = lvds->data_mirror
 					  ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
 					  : DRM_BUS_FLAG_DATA_MSB_TO_LSB;
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, lvds->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation panel_lvds_get_orientation,(struct drm_panel *panel)
+{
+       struct panel_lvds *lvds = to_panel_lvds(panel);
+
+       return lvds->orientation;
+}
+
 static const struct drm_panel_funcs panel_lvds_funcs = {
 	.unprepare = panel_lvds_unprepare,
 	.prepare = panel_lvds_prepare,
 	.get_modes = panel_lvds_get_modes,
+	.get_orientation = panel_lvds_get_orientation,
 };
 
 static int panel_lvds_parse_dt(struct panel_lvds *lvds)
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v3 4/8] drm/panel: lvds: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-lvds.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
index 27a1c9923b09..239527409b00 100644
--- a/drivers/gpu/drm/panel/panel-lvds.c
+++ b/drivers/gpu/drm/panel/panel-lvds.c
@@ -102,15 +102,29 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
 	connector->display_info.bus_flags = lvds->data_mirror
 					  ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
 					  : DRM_BUS_FLAG_DATA_MSB_TO_LSB;
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, lvds->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation panel_lvds_get_orientation,(struct drm_panel *panel)
+{
+       struct panel_lvds *lvds = to_panel_lvds(panel);
+
+       return lvds->orientation;
+}
+
 static const struct drm_panel_funcs panel_lvds_funcs = {
 	.unprepare = panel_lvds_unprepare,
 	.prepare = panel_lvds_prepare,
 	.get_modes = panel_lvds_get_modes,
+	.get_orientation = panel_lvds_get_orientation,
 };
 
 static int panel_lvds_parse_dt(struct panel_lvds *lvds)
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 4/8] drm/panel: lvds: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-lvds.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
index 27a1c9923b09..239527409b00 100644
--- a/drivers/gpu/drm/panel/panel-lvds.c
+++ b/drivers/gpu/drm/panel/panel-lvds.c
@@ -102,15 +102,29 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
 	connector->display_info.bus_flags = lvds->data_mirror
 					  ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
 					  : DRM_BUS_FLAG_DATA_MSB_TO_LSB;
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, lvds->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation panel_lvds_get_orientation,(struct drm_panel *panel)
+{
+       struct panel_lvds *lvds = to_panel_lvds(panel);
+
+       return lvds->orientation;
+}
+
 static const struct drm_panel_funcs panel_lvds_funcs = {
 	.unprepare = panel_lvds_unprepare,
 	.prepare = panel_lvds_prepare,
 	.get_modes = panel_lvds_get_modes,
+	.get_orientation = panel_lvds_get_orientation,
 };
 
 static int panel_lvds_parse_dt(struct panel_lvds *lvds)
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 5/8] drm/panel: panel-simple: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-simple.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index a34f4198a534..82041cdb5478 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -411,7 +411,12 @@ static int panel_simple_get_modes(struct drm_panel *panel,
 	/* add hard-coded panel modes */
 	num += panel_simple_get_non_edid_modes(p, connector);
 
-	/* set up connector's "panel orientation" property */
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, p->orientation);
 
 	return num;
@@ -434,6 +439,14 @@ static int panel_simple_get_timings(struct drm_panel *panel,
 	return p->desc->num_timings;
 }
 
+static enum drm_panel_orientation panel_simple_get_orientation(struct drm_panel *panel)
+{
+       struct panel_simple *p = to_panel_simple(panel);
+
+       return p->orientation;
+}
+
+
 static const struct drm_panel_funcs panel_simple_funcs = {
 	.disable = panel_simple_disable,
 	.unprepare = panel_simple_unprepare,
@@ -441,6 +454,7 @@ static const struct drm_panel_funcs panel_simple_funcs = {
 	.enable = panel_simple_enable,
 	.get_modes = panel_simple_get_modes,
 	.get_timings = panel_simple_get_timings,
+	.get_orientation = panel_simple_get_orientation,
 };
 
 static struct panel_desc panel_dpi;
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 5/8] drm/panel: panel-simple: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-simple.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index a34f4198a534..82041cdb5478 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -411,7 +411,12 @@ static int panel_simple_get_modes(struct drm_panel *panel,
 	/* add hard-coded panel modes */
 	num += panel_simple_get_non_edid_modes(p, connector);
 
-	/* set up connector's "panel orientation" property */
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, p->orientation);
 
 	return num;
@@ -434,6 +439,14 @@ static int panel_simple_get_timings(struct drm_panel *panel,
 	return p->desc->num_timings;
 }
 
+static enum drm_panel_orientation panel_simple_get_orientation(struct drm_panel *panel)
+{
+       struct panel_simple *p = to_panel_simple(panel);
+
+       return p->orientation;
+}
+
+
 static const struct drm_panel_funcs panel_simple_funcs = {
 	.disable = panel_simple_disable,
 	.unprepare = panel_simple_unprepare,
@@ -441,6 +454,7 @@ static const struct drm_panel_funcs panel_simple_funcs = {
 	.enable = panel_simple_enable,
 	.get_modes = panel_simple_get_modes,
 	.get_timings = panel_simple_get_timings,
+	.get_orientation = panel_simple_get_orientation,
 };
 
 static struct panel_desc panel_dpi;
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v3 5/8] drm/panel: panel-simple: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-simple.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index a34f4198a534..82041cdb5478 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -411,7 +411,12 @@ static int panel_simple_get_modes(struct drm_panel *panel,
 	/* add hard-coded panel modes */
 	num += panel_simple_get_non_edid_modes(p, connector);
 
-	/* set up connector's "panel orientation" property */
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, p->orientation);
 
 	return num;
@@ -434,6 +439,14 @@ static int panel_simple_get_timings(struct drm_panel *panel,
 	return p->desc->num_timings;
 }
 
+static enum drm_panel_orientation panel_simple_get_orientation(struct drm_panel *panel)
+{
+       struct panel_simple *p = to_panel_simple(panel);
+
+       return p->orientation;
+}
+
+
 static const struct drm_panel_funcs panel_simple_funcs = {
 	.disable = panel_simple_disable,
 	.unprepare = panel_simple_unprepare,
@@ -441,6 +454,7 @@ static const struct drm_panel_funcs panel_simple_funcs = {
 	.enable = panel_simple_enable,
 	.get_modes = panel_simple_get_modes,
 	.get_timings = panel_simple_get_timings,
+	.get_orientation = panel_simple_get_orientation,
 };
 
 static struct panel_desc panel_dpi;
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 5/8] drm/panel: panel-simple: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-simple.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index a34f4198a534..82041cdb5478 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -411,7 +411,12 @@ static int panel_simple_get_modes(struct drm_panel *panel,
 	/* add hard-coded panel modes */
 	num += panel_simple_get_non_edid_modes(p, connector);
 
-	/* set up connector's "panel orientation" property */
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, p->orientation);
 
 	return num;
@@ -434,6 +439,14 @@ static int panel_simple_get_timings(struct drm_panel *panel,
 	return p->desc->num_timings;
 }
 
+static enum drm_panel_orientation panel_simple_get_orientation(struct drm_panel *panel)
+{
+       struct panel_simple *p = to_panel_simple(panel);
+
+       return p->orientation;
+}
+
+
 static const struct drm_panel_funcs panel_simple_funcs = {
 	.disable = panel_simple_disable,
 	.unprepare = panel_simple_unprepare,
@@ -441,6 +454,7 @@ static const struct drm_panel_funcs panel_simple_funcs = {
 	.enable = panel_simple_enable,
 	.get_modes = panel_simple_get_modes,
 	.get_timings = panel_simple_get_timings,
+	.get_orientation = panel_simple_get_orientation,
 };
 
 static struct panel_desc panel_dpi;
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 6/8] drm/panel: ili9881c: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
index ba30d11547ad..c098a0ed6be7 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
@@ -853,17 +853,31 @@ static int ili9881c_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = mode->width_mm;
 	connector->display_info.height_mm = mode->height_mm;
 
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, ctx->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation ili9881c_get_orientation(struct drm_panel *panel)
+{
+       struct ili9881c *ctx = panel_to_ili9881c(panel);
+
+       return ctx->orientation;
+}
+
 static const struct drm_panel_funcs ili9881c_funcs = {
 	.prepare	= ili9881c_prepare,
 	.unprepare	= ili9881c_unprepare,
 	.enable		= ili9881c_enable,
 	.disable	= ili9881c_disable,
 	.get_modes	= ili9881c_get_modes,
+	.get_orientation = ili9881c_get_orientation,
 };
 
 static int ili9881c_dsi_probe(struct mipi_dsi_device *dsi)
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 6/8] drm/panel: ili9881c: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
index ba30d11547ad..c098a0ed6be7 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
@@ -853,17 +853,31 @@ static int ili9881c_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = mode->width_mm;
 	connector->display_info.height_mm = mode->height_mm;
 
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, ctx->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation ili9881c_get_orientation(struct drm_panel *panel)
+{
+       struct ili9881c *ctx = panel_to_ili9881c(panel);
+
+       return ctx->orientation;
+}
+
 static const struct drm_panel_funcs ili9881c_funcs = {
 	.prepare	= ili9881c_prepare,
 	.unprepare	= ili9881c_unprepare,
 	.enable		= ili9881c_enable,
 	.disable	= ili9881c_disable,
 	.get_modes	= ili9881c_get_modes,
+	.get_orientation = ili9881c_get_orientation,
 };
 
 static int ili9881c_dsi_probe(struct mipi_dsi_device *dsi)
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v3 6/8] drm/panel: ili9881c: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
index ba30d11547ad..c098a0ed6be7 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
@@ -853,17 +853,31 @@ static int ili9881c_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = mode->width_mm;
 	connector->display_info.height_mm = mode->height_mm;
 
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, ctx->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation ili9881c_get_orientation(struct drm_panel *panel)
+{
+       struct ili9881c *ctx = panel_to_ili9881c(panel);
+
+       return ctx->orientation;
+}
+
 static const struct drm_panel_funcs ili9881c_funcs = {
 	.prepare	= ili9881c_prepare,
 	.unprepare	= ili9881c_unprepare,
 	.enable		= ili9881c_enable,
 	.disable	= ili9881c_disable,
 	.get_modes	= ili9881c_get_modes,
+	.get_orientation = ili9881c_get_orientation,
 };
 
 static int ili9881c_dsi_probe(struct mipi_dsi_device *dsi)
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 6/8] drm/panel: ili9881c: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
index ba30d11547ad..c098a0ed6be7 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
@@ -853,17 +853,31 @@ static int ili9881c_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = mode->width_mm;
 	connector->display_info.height_mm = mode->height_mm;
 
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, ctx->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation ili9881c_get_orientation(struct drm_panel *panel)
+{
+       struct ili9881c *ctx = panel_to_ili9881c(panel);
+
+       return ctx->orientation;
+}
+
 static const struct drm_panel_funcs ili9881c_funcs = {
 	.prepare	= ili9881c_prepare,
 	.unprepare	= ili9881c_unprepare,
 	.enable		= ili9881c_enable,
 	.disable	= ili9881c_disable,
 	.get_modes	= ili9881c_get_modes,
+	.get_orientation = ili9881c_get_orientation,
 };
 
 static int ili9881c_dsi_probe(struct mipi_dsi_device *dsi)
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 7/8] drm/panel: elida-kd35t133: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-elida-kd35t133.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
index 80227617a4d6..fa85a288afdc 100644
--- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c
+++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
@@ -217,15 +217,29 @@ static int kd35t133_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = mode->width_mm;
 	connector->display_info.height_mm = mode->height_mm;
 	drm_mode_probed_add(connector, mode);
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, ctx->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation kd35t133_get_orientation(struct drm_panel *panel)
+{
+       struct kd35t133 *ctx = panel_to_kd35t133(panel);
+
+       return ctx->orientation;
+}
+
 static const struct drm_panel_funcs kd35t133_funcs = {
 	.unprepare	= kd35t133_unprepare,
 	.prepare	= kd35t133_prepare,
 	.get_modes	= kd35t133_get_modes,
+	.get_orientation = kd35t133_get_orientation,
 };
 
 static int kd35t133_probe(struct mipi_dsi_device *dsi)
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 7/8] drm/panel: elida-kd35t133: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-elida-kd35t133.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
index 80227617a4d6..fa85a288afdc 100644
--- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c
+++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
@@ -217,15 +217,29 @@ static int kd35t133_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = mode->width_mm;
 	connector->display_info.height_mm = mode->height_mm;
 	drm_mode_probed_add(connector, mode);
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, ctx->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation kd35t133_get_orientation(struct drm_panel *panel)
+{
+       struct kd35t133 *ctx = panel_to_kd35t133(panel);
+
+       return ctx->orientation;
+}
+
 static const struct drm_panel_funcs kd35t133_funcs = {
 	.unprepare	= kd35t133_unprepare,
 	.prepare	= kd35t133_prepare,
 	.get_modes	= kd35t133_get_modes,
+	.get_orientation = kd35t133_get_orientation,
 };
 
 static int kd35t133_probe(struct mipi_dsi_device *dsi)
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v3 7/8] drm/panel: elida-kd35t133: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-elida-kd35t133.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
index 80227617a4d6..fa85a288afdc 100644
--- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c
+++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
@@ -217,15 +217,29 @@ static int kd35t133_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = mode->width_mm;
 	connector->display_info.height_mm = mode->height_mm;
 	drm_mode_probed_add(connector, mode);
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, ctx->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation kd35t133_get_orientation(struct drm_panel *panel)
+{
+       struct kd35t133 *ctx = panel_to_kd35t133(panel);
+
+       return ctx->orientation;
+}
+
 static const struct drm_panel_funcs kd35t133_funcs = {
 	.unprepare	= kd35t133_unprepare,
 	.prepare	= kd35t133_prepare,
 	.get_modes	= kd35t133_get_modes,
+	.get_orientation = kd35t133_get_orientation,
 };
 
 static int kd35t133_probe(struct mipi_dsi_device *dsi)
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 7/8] drm/panel: elida-kd35t133: Implement .get_orientation callback

[Hsin-Yi Wang]

To return the orientation property to drm/kms driver.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: add comments for notice.
---
 drivers/gpu/drm/panel/panel-elida-kd35t133.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
index 80227617a4d6..fa85a288afdc 100644
--- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c
+++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
@@ -217,15 +217,29 @@ static int kd35t133_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = mode->width_mm;
 	connector->display_info.height_mm = mode->height_mm;
 	drm_mode_probed_add(connector, mode);
+	/*
+	 * drm drivers are expected to call drm_panel_get_orientation() to get
+	 * panel's orientation then drm_connector_set_panel_orientation() to
+	 * set the property before drm_dev_register(). Otherwise there will be
+	 * a WARN_ON if orientation is set after drm is registered.
+	 */
 	drm_connector_set_panel_orientation(connector, ctx->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation kd35t133_get_orientation(struct drm_panel *panel)
+{
+       struct kd35t133 *ctx = panel_to_kd35t133(panel);
+
+       return ctx->orientation;
+}
+
 static const struct drm_panel_funcs kd35t133_funcs = {
 	.unprepare	= kd35t133_unprepare,
 	.prepare	= kd35t133_prepare,
 	.get_modes	= kd35t133_get_modes,
+	.get_orientation = kd35t133_get_orientation,
 };
 
 static int kd35t133_probe(struct mipi_dsi_device *dsi)
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 8/8] drm/mediatek: Config orientation property if panel provides it

[Hsin-Yi Wang]

Panel orientation property should be set before drm_dev_register().
Mediatek drm driver calls drm_dev_register() in .bind(). However, most
panels sets orientation property relatively late, mostly in .get_modes()
callback, since this is when they are able to get the connector and
binds the orientation property to it, though the value should be known
when the panel is probed.

Let the drm driver check if the remote end point is a panel and if it
contains the orientation property. If it does, set it before
drm_dev_register() is called.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: no change.
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index bd3f5b485085..86613360d2d9 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -185,6 +185,7 @@ struct mtk_dsi {
 	struct drm_encoder encoder;
 	struct drm_bridge bridge;
 	struct drm_bridge *next_bridge;
+	struct drm_panel *panel;
 	struct drm_connector *connector;
 	struct phy *phy;
 
@@ -822,6 +823,12 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
 		ret = PTR_ERR(dsi->connector);
 		goto err_cleanup_encoder;
 	}
+
+	/* Read panel orientation */
+	if (dsi->panel)
+		drm_connector_set_panel_orientation(dsi->connector,
+				drm_panel_get_orientation(dsi->panel));
+
 	drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
 
 	return 0;
@@ -837,6 +844,9 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
 	struct drm_device *drm = data;
 	struct mtk_dsi *dsi = dev_get_drvdata(dev);
 
+	/* Get panel if existed */
+	drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &dsi->panel, NULL);
+
 	ret = mtk_dsi_encoder_init(drm, dsi);
 	if (ret)
 		return ret;
-- 
2.36.1.255.ge46751e96f-goog

[PATCH v3 8/8] drm/mediatek: Config orientation property if panel provides it

[Hsin-Yi Wang]

Panel orientation property should be set before drm_dev_register().
Mediatek drm driver calls drm_dev_register() in .bind(). However, most
panels sets orientation property relatively late, mostly in .get_modes()
callback, since this is when they are able to get the connector and
binds the orientation property to it, though the value should be known
when the panel is probed.

Let the drm driver check if the remote end point is a panel and if it
contains the orientation property. If it does, set it before
drm_dev_register() is called.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: no change.
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index bd3f5b485085..86613360d2d9 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -185,6 +185,7 @@ struct mtk_dsi {
 	struct drm_encoder encoder;
 	struct drm_bridge bridge;
 	struct drm_bridge *next_bridge;
+	struct drm_panel *panel;
 	struct drm_connector *connector;
 	struct phy *phy;
 
@@ -822,6 +823,12 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
 		ret = PTR_ERR(dsi->connector);
 		goto err_cleanup_encoder;
 	}
+
+	/* Read panel orientation */
+	if (dsi->panel)
+		drm_connector_set_panel_orientation(dsi->connector,
+				drm_panel_get_orientation(dsi->panel));
+
 	drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
 
 	return 0;
@@ -837,6 +844,9 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
 	struct drm_device *drm = data;
 	struct mtk_dsi *dsi = dev_get_drvdata(dev);
 
+	/* Get panel if existed */
+	drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &dsi->panel, NULL);
+
 	ret = mtk_dsi_encoder_init(drm, dsi);
 	if (ret)
 		return ret;
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v3 8/8] drm/mediatek: Config orientation property if panel provides it

[Hsin-Yi Wang]

Panel orientation property should be set before drm_dev_register().
Mediatek drm driver calls drm_dev_register() in .bind(). However, most
panels sets orientation property relatively late, mostly in .get_modes()
callback, since this is when they are able to get the connector and
binds the orientation property to it, though the value should be known
when the panel is probed.

Let the drm driver check if the remote end point is a panel and if it
contains the orientation property. If it does, set it before
drm_dev_register() is called.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: no change.
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index bd3f5b485085..86613360d2d9 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -185,6 +185,7 @@ struct mtk_dsi {
 	struct drm_encoder encoder;
 	struct drm_bridge bridge;
 	struct drm_bridge *next_bridge;
+	struct drm_panel *panel;
 	struct drm_connector *connector;
 	struct phy *phy;
 
@@ -822,6 +823,12 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
 		ret = PTR_ERR(dsi->connector);
 		goto err_cleanup_encoder;
 	}
+
+	/* Read panel orientation */
+	if (dsi->panel)
+		drm_connector_set_panel_orientation(dsi->connector,
+				drm_panel_get_orientation(dsi->panel));
+
 	drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
 
 	return 0;
@@ -837,6 +844,9 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
 	struct drm_device *drm = data;
 	struct mtk_dsi *dsi = dev_get_drvdata(dev);
 
+	/* Get panel if existed */
+	drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &dsi->panel, NULL);
+
 	ret = mtk_dsi_encoder_init(drm, dsi);
 	if (ret)
 		return ret;
-- 
2.36.1.255.ge46751e96f-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 8/8] drm/mediatek: Config orientation property if panel provides it

[Hsin-Yi Wang]

Panel orientation property should be set before drm_dev_register().
Mediatek drm driver calls drm_dev_register() in .bind(). However, most
panels sets orientation property relatively late, mostly in .get_modes()
callback, since this is when they are able to get the connector and
binds the orientation property to it, though the value should be known
when the panel is probed.

Let the drm driver check if the remote end point is a panel and if it
contains the orientation property. If it does, set it before
drm_dev_register() is called.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2->v3: no change.
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index bd3f5b485085..86613360d2d9 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -185,6 +185,7 @@ struct mtk_dsi {
 	struct drm_encoder encoder;
 	struct drm_bridge bridge;
 	struct drm_bridge *next_bridge;
+	struct drm_panel *panel;
 	struct drm_connector *connector;
 	struct phy *phy;
 
@@ -822,6 +823,12 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
 		ret = PTR_ERR(dsi->connector);
 		goto err_cleanup_encoder;
 	}
+
+	/* Read panel orientation */
+	if (dsi->panel)
+		drm_connector_set_panel_orientation(dsi->connector,
+				drm_panel_get_orientation(dsi->panel));
+
 	drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
 
 	return 0;
@@ -837,6 +844,9 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
 	struct drm_device *drm = data;
 	struct mtk_dsi *dsi = dev_get_drvdata(dev);
 
+	/* Get panel if existed */
+	drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &dsi->panel, NULL);
+
 	ret = mtk_dsi_encoder_init(drm, dsi);
 	if (ret)
 		return ret;
-- 
2.36.1.255.ge46751e96f-goog

Re: [PATCH v3 8/8] drm/mediatek: Config orientation property if panel provides it

[AngeloGioacchino Del Regno]

Il 06/06/22 06:47, Hsin-Yi Wang ha scritto:
> Panel orientation property should be set before drm_dev_register().
> Mediatek drm driver calls drm_dev_register() in .bind(). However, most
> panels sets orientation property relatively late, mostly in .get_modes()
> callback, since this is when they are able to get the connector and
> binds the orientation property to it, though the value should be known
> when the panel is probed.
> 
> Let the drm driver check if the remote end point is a panel and if it
> contains the orientation property. If it does, set it before
> drm_dev_register() is called.
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v3 8/8] drm/mediatek: Config orientation property if panel provides it

[AngeloGioacchino Del Regno]

Il 06/06/22 06:47, Hsin-Yi Wang ha scritto:
> Panel orientation property should be set before drm_dev_register().
> Mediatek drm driver calls drm_dev_register() in .bind(). However, most
> panels sets orientation property relatively late, mostly in .get_modes()
> callback, since this is when they are able to get the connector and
> binds the orientation property to it, though the value should be known
> when the panel is probed.
> 
> Let the drm driver check if the remote end point is a panel and if it
> contains the orientation property. If it does, set it before
> drm_dev_register() is called.
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v3 8/8] drm/mediatek: Config orientation property if panel provides it

[AngeloGioacchino Del Regno]

Il 06/06/22 06:47, Hsin-Yi Wang ha scritto:
> Panel orientation property should be set before drm_dev_register().
> Mediatek drm driver calls drm_dev_register() in .bind(). However, most
> panels sets orientation property relatively late, mostly in .get_modes()
> callback, since this is when they are able to get the connector and
> binds the orientation property to it, though the value should be known
> when the panel is probed.
> 
> Let the drm driver check if the remote end point is a panel and if it
> contains the orientation property. If it does, set it before
> drm_dev_register() is called.
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 8/8] drm/mediatek: Config orientation property if panel provides it

[AngeloGioacchino Del Regno]

Il 06/06/22 06:47, Hsin-Yi Wang ha scritto:
> Panel orientation property should be set before drm_dev_register().
> Mediatek drm driver calls drm_dev_register() in .bind(). However, most
> panels sets orientation property relatively late, mostly in .get_modes()
> callback, since this is when they are able to get the connector and
> binds the orientation property to it, though the value should be known
> when the panel is probed.
> 
> Let the drm driver check if the remote end point is a panel and if it
> contains the orientation property. If it does, set it before
> drm_dev_register() is called.
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v3 1/8] drm/panel: Add an API drm_panel_get_orientation() to return panel orientation

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> Panels usually call drm_connector_set_panel_orientation(), which is
> later than drm/kms driver calling drm_dev_register(). This leads to a
> WARN().
>
> The orientation property is known earlier. For example, some panels
> parse the property through device tree during probe.
>
> Add an API to return the property from panel to drm/kms driver, so the
> drivers are able to call drm_connector_set_panel_orientation() before
> drm_dev_register().
>
> Suggested-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: no change
> ---
>  drivers/gpu/drm/drm_panel.c |  8 ++++++++
>  include/drm/drm_panel.h     | 10 ++++++++++
>  2 files changed, 18 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> index f634371c717a..4a512ca80673 100644
> --- a/drivers/gpu/drm/drm_panel.c
> +++ b/drivers/gpu/drm/drm_panel.c
> @@ -223,6 +223,14 @@ int drm_panel_get_modes(struct drm_panel *panel,
>  }
>  EXPORT_SYMBOL(drm_panel_get_modes);
>
> +enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel)
> +{
> +       if (panel && panel->funcs && panel->funcs->get_orientation)
> +               return panel->funcs->get_orientation(panel);
> +
> +       return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +}
> +EXPORT_SYMBOL(drm_panel_get_orientation);
>  #ifdef CONFIG_OF

nit: there used to be a blank line before the #ifdef but there no
longer is after your patch.

Other than that...

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 1/8] drm/panel: Add an API drm_panel_get_orientation() to return panel orientation

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> Panels usually call drm_connector_set_panel_orientation(), which is
> later than drm/kms driver calling drm_dev_register(). This leads to a
> WARN().
>
> The orientation property is known earlier. For example, some panels
> parse the property through device tree during probe.
>
> Add an API to return the property from panel to drm/kms driver, so the
> drivers are able to call drm_connector_set_panel_orientation() before
> drm_dev_register().
>
> Suggested-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: no change
> ---
>  drivers/gpu/drm/drm_panel.c |  8 ++++++++
>  include/drm/drm_panel.h     | 10 ++++++++++
>  2 files changed, 18 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> index f634371c717a..4a512ca80673 100644
> --- a/drivers/gpu/drm/drm_panel.c
> +++ b/drivers/gpu/drm/drm_panel.c
> @@ -223,6 +223,14 @@ int drm_panel_get_modes(struct drm_panel *panel,
>  }
>  EXPORT_SYMBOL(drm_panel_get_modes);
>
> +enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel)
> +{
> +       if (panel && panel->funcs && panel->funcs->get_orientation)
> +               return panel->funcs->get_orientation(panel);
> +
> +       return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +}
> +EXPORT_SYMBOL(drm_panel_get_orientation);
>  #ifdef CONFIG_OF

nit: there used to be a blank line before the #ifdef but there no
longer is after your patch.

Other than that...

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v3 1/8] drm/panel: Add an API drm_panel_get_orientation() to return panel orientation

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> Panels usually call drm_connector_set_panel_orientation(), which is
> later than drm/kms driver calling drm_dev_register(). This leads to a
> WARN().
>
> The orientation property is known earlier. For example, some panels
> parse the property through device tree during probe.
>
> Add an API to return the property from panel to drm/kms driver, so the
> drivers are able to call drm_connector_set_panel_orientation() before
> drm_dev_register().
>
> Suggested-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: no change
> ---
>  drivers/gpu/drm/drm_panel.c |  8 ++++++++
>  include/drm/drm_panel.h     | 10 ++++++++++
>  2 files changed, 18 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> index f634371c717a..4a512ca80673 100644
> --- a/drivers/gpu/drm/drm_panel.c
> +++ b/drivers/gpu/drm/drm_panel.c
> @@ -223,6 +223,14 @@ int drm_panel_get_modes(struct drm_panel *panel,
>  }
>  EXPORT_SYMBOL(drm_panel_get_modes);
>
> +enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel)
> +{
> +       if (panel && panel->funcs && panel->funcs->get_orientation)
> +               return panel->funcs->get_orientation(panel);
> +
> +       return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +}
> +EXPORT_SYMBOL(drm_panel_get_orientation);
>  #ifdef CONFIG_OF

nit: there used to be a blank line before the #ifdef but there no
longer is after your patch.

Other than that...

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 1/8] drm/panel: Add an API drm_panel_get_orientation() to return panel orientation

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> Panels usually call drm_connector_set_panel_orientation(), which is
> later than drm/kms driver calling drm_dev_register(). This leads to a
> WARN().
>
> The orientation property is known earlier. For example, some panels
> parse the property through device tree during probe.
>
> Add an API to return the property from panel to drm/kms driver, so the
> drivers are able to call drm_connector_set_panel_orientation() before
> drm_dev_register().
>
> Suggested-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: no change
> ---
>  drivers/gpu/drm/drm_panel.c |  8 ++++++++
>  include/drm/drm_panel.h     | 10 ++++++++++
>  2 files changed, 18 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> index f634371c717a..4a512ca80673 100644
> --- a/drivers/gpu/drm/drm_panel.c
> +++ b/drivers/gpu/drm/drm_panel.c
> @@ -223,6 +223,14 @@ int drm_panel_get_modes(struct drm_panel *panel,
>  }
>  EXPORT_SYMBOL(drm_panel_get_modes);
>
> +enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel)
> +{
> +       if (panel && panel->funcs && panel->funcs->get_orientation)
> +               return panel->funcs->get_orientation(panel);
> +
> +       return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +}
> +EXPORT_SYMBOL(drm_panel_get_orientation);
>  #ifdef CONFIG_OF

nit: there used to be a blank line before the #ifdef but there no
longer is after your patch.

Other than that...

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 2/8] drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 2/8] drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v3 2/8] drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 2/8] drm/panel: boe-tv101wum-nl6: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 3/8] drm/panel: panel-edp: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-edp.c | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 3/8] drm/panel: panel-edp: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-edp.c | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v3 3/8] drm/panel: panel-edp: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-edp.c | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 3/8] drm/panel: panel-edp: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-edp.c | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 4/8] drm/panel: lvds: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-lvds.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
> index 27a1c9923b09..239527409b00 100644
> --- a/drivers/gpu/drm/panel/panel-lvds.c
> +++ b/drivers/gpu/drm/panel/panel-lvds.c
> @@ -102,15 +102,29 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
>         connector->display_info.bus_flags = lvds->data_mirror
>                                           ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
>                                           : DRM_BUS_FLAG_DATA_MSB_TO_LSB;

Can you rebase your patch and send again? There's a context conflict
with the above line because your tree is lacking commit 83c784e70036
("drm/panel: lvds: Use bus_flags from DT panel-timing property")

In any case:

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 4/8] drm/panel: lvds: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-lvds.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
> index 27a1c9923b09..239527409b00 100644
> --- a/drivers/gpu/drm/panel/panel-lvds.c
> +++ b/drivers/gpu/drm/panel/panel-lvds.c
> @@ -102,15 +102,29 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
>         connector->display_info.bus_flags = lvds->data_mirror
>                                           ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
>                                           : DRM_BUS_FLAG_DATA_MSB_TO_LSB;

Can you rebase your patch and send again? There's a context conflict
with the above line because your tree is lacking commit 83c784e70036
("drm/panel: lvds: Use bus_flags from DT panel-timing property")

In any case:

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v3 4/8] drm/panel: lvds: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-lvds.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
> index 27a1c9923b09..239527409b00 100644
> --- a/drivers/gpu/drm/panel/panel-lvds.c
> +++ b/drivers/gpu/drm/panel/panel-lvds.c
> @@ -102,15 +102,29 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
>         connector->display_info.bus_flags = lvds->data_mirror
>                                           ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
>                                           : DRM_BUS_FLAG_DATA_MSB_TO_LSB;

Can you rebase your patch and send again? There's a context conflict
with the above line because your tree is lacking commit 83c784e70036
("drm/panel: lvds: Use bus_flags from DT panel-timing property")

In any case:

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 4/8] drm/panel: lvds: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-lvds.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
> index 27a1c9923b09..239527409b00 100644
> --- a/drivers/gpu/drm/panel/panel-lvds.c
> +++ b/drivers/gpu/drm/panel/panel-lvds.c
> @@ -102,15 +102,29 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
>         connector->display_info.bus_flags = lvds->data_mirror
>                                           ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
>                                           : DRM_BUS_FLAG_DATA_MSB_TO_LSB;

Can you rebase your patch and send again? There's a context conflict
with the above line because your tree is lacking commit 83c784e70036
("drm/panel: lvds: Use bus_flags from DT panel-timing property")

In any case:

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 5/8] drm/panel: panel-simple: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 5/8] drm/panel: panel-simple: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 5/8] drm/panel: panel-simple: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 5/8] drm/panel: panel-simple: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v3 6/8] drm/panel: ili9881c: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 6/8] drm/panel: ili9881c: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v3 6/8] drm/panel: ili9881c: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 6/8] drm/panel: ili9881c: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 7/8] drm/panel: elida-kd35t133: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-elida-kd35t133.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 7/8] drm/panel: elida-kd35t133: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-elida-kd35t133.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v3 7/8] drm/panel: elida-kd35t133: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-elida-kd35t133.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 7/8] drm/panel: elida-kd35t133: Implement .get_orientation callback

[Doug Anderson]

Hi,

On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> To return the orientation property to drm/kms driver.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> ---
> v2->v3: add comments for notice.
> ---
>  drivers/gpu/drm/panel/panel-elida-kd35t133.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 4/8] drm/panel: lvds: Implement .get_orientation callback

[Hsin-Yi Wang]

On Mon, Jun 6, 2022 at 10:27 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
> >
> > To return the orientation property to drm/kms driver.
> >
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> > ---
> > v2->v3: add comments for notice.
> > ---
> >  drivers/gpu/drm/panel/panel-lvds.c | 14 ++++++++++++++
> >  1 file changed, 14 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
> > index 27a1c9923b09..239527409b00 100644
> > --- a/drivers/gpu/drm/panel/panel-lvds.c
> > +++ b/drivers/gpu/drm/panel/panel-lvds.c
> > @@ -102,15 +102,29 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
> >         connector->display_info.bus_flags = lvds->data_mirror
> >                                           ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
> >                                           : DRM_BUS_FLAG_DATA_MSB_TO_LSB;
>
> Can you rebase your patch and send again? There's a context conflict
> with the above line because your tree is lacking commit 83c784e70036
> ("drm/panel: lvds: Use bus_flags from DT panel-timing property")
>
Rebased in v4.

> In any case:
>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 4/8] drm/panel: lvds: Implement .get_orientation callback

[Hsin-Yi Wang]

On Mon, Jun 6, 2022 at 10:27 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
> >
> > To return the orientation property to drm/kms driver.
> >
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> > ---
> > v2->v3: add comments for notice.
> > ---
> >  drivers/gpu/drm/panel/panel-lvds.c | 14 ++++++++++++++
> >  1 file changed, 14 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
> > index 27a1c9923b09..239527409b00 100644
> > --- a/drivers/gpu/drm/panel/panel-lvds.c
> > +++ b/drivers/gpu/drm/panel/panel-lvds.c
> > @@ -102,15 +102,29 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
> >         connector->display_info.bus_flags = lvds->data_mirror
> >                                           ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
> >                                           : DRM_BUS_FLAG_DATA_MSB_TO_LSB;
>
> Can you rebase your patch and send again? There's a context conflict
> with the above line because your tree is lacking commit 83c784e70036
> ("drm/panel: lvds: Use bus_flags from DT panel-timing property")
>
Rebased in v4.

> In any case:
>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 4/8] drm/panel: lvds: Implement .get_orientation callback

[Hsin-Yi Wang]

On Mon, Jun 6, 2022 at 10:27 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
> >
> > To return the orientation property to drm/kms driver.
> >
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> > ---
> > v2->v3: add comments for notice.
> > ---
> >  drivers/gpu/drm/panel/panel-lvds.c | 14 ++++++++++++++
> >  1 file changed, 14 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
> > index 27a1c9923b09..239527409b00 100644
> > --- a/drivers/gpu/drm/panel/panel-lvds.c
> > +++ b/drivers/gpu/drm/panel/panel-lvds.c
> > @@ -102,15 +102,29 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
> >         connector->display_info.bus_flags = lvds->data_mirror
> >                                           ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
> >                                           : DRM_BUS_FLAG_DATA_MSB_TO_LSB;
>
> Can you rebase your patch and send again? There's a context conflict
> with the above line because your tree is lacking commit 83c784e70036
> ("drm/panel: lvds: Use bus_flags from DT panel-timing property")
>
Rebased in v4.

> In any case:
>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v3 4/8] drm/panel: lvds: Implement .get_orientation callback

[Hsin-Yi Wang]

On Mon, Jun 6, 2022 at 10:27 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
> >
> > To return the orientation property to drm/kms driver.
> >
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> > ---
> > v2->v3: add comments for notice.
> > ---
> >  drivers/gpu/drm/panel/panel-lvds.c | 14 ++++++++++++++
> >  1 file changed, 14 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
> > index 27a1c9923b09..239527409b00 100644
> > --- a/drivers/gpu/drm/panel/panel-lvds.c
> > +++ b/drivers/gpu/drm/panel/panel-lvds.c
> > @@ -102,15 +102,29 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
> >         connector->display_info.bus_flags = lvds->data_mirror
> >                                           ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
> >                                           : DRM_BUS_FLAG_DATA_MSB_TO_LSB;
>
> Can you rebase your patch and send again? There's a context conflict
> with the above line because your tree is lacking commit 83c784e70036
> ("drm/panel: lvds: Use bus_flags from DT panel-timing property")
>
Rebased in v4.

> In any case:
>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/8] drm/panel: Add an API drm_panel_get_orientation() to return panel orientation

[Hsin-Yi Wang]

On Mon, Jun 6, 2022 at 10:21 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
> >
> > Panels usually call drm_connector_set_panel_orientation(), which is
> > later than drm/kms driver calling drm_dev_register(). This leads to a
> > WARN().
> >
> > The orientation property is known earlier. For example, some panels
> > parse the property through device tree during probe.
> >
> > Add an API to return the property from panel to drm/kms driver, so the
> > drivers are able to call drm_connector_set_panel_orientation() before
> > drm_dev_register().
> >
> > Suggested-by: Hans de Goede <hdegoede@redhat.com>
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> > ---
> > v2->v3: no change
> > ---
> >  drivers/gpu/drm/drm_panel.c |  8 ++++++++
> >  include/drm/drm_panel.h     | 10 ++++++++++
> >  2 files changed, 18 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> > index f634371c717a..4a512ca80673 100644
> > --- a/drivers/gpu/drm/drm_panel.c
> > +++ b/drivers/gpu/drm/drm_panel.c
> > @@ -223,6 +223,14 @@ int drm_panel_get_modes(struct drm_panel *panel,
> >  }
> >  EXPORT_SYMBOL(drm_panel_get_modes);
> >
> > +enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel)
> > +{
> > +       if (panel && panel->funcs && panel->funcs->get_orientation)
> > +               return panel->funcs->get_orientation(panel);
> > +
> > +       return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > +}
> > +EXPORT_SYMBOL(drm_panel_get_orientation);
> >  #ifdef CONFIG_OF
>
> nit: there used to be a blank line before the #ifdef but there no
> longer is after your patch.
>
Added in v4.
> Other than that...
>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 1/8] drm/panel: Add an API drm_panel_get_orientation() to return panel orientation

[Hsin-Yi Wang]

On Mon, Jun 6, 2022 at 10:21 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
> >
> > Panels usually call drm_connector_set_panel_orientation(), which is
> > later than drm/kms driver calling drm_dev_register(). This leads to a
> > WARN().
> >
> > The orientation property is known earlier. For example, some panels
> > parse the property through device tree during probe.
> >
> > Add an API to return the property from panel to drm/kms driver, so the
> > drivers are able to call drm_connector_set_panel_orientation() before
> > drm_dev_register().
> >
> > Suggested-by: Hans de Goede <hdegoede@redhat.com>
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> > ---
> > v2->v3: no change
> > ---
> >  drivers/gpu/drm/drm_panel.c |  8 ++++++++
> >  include/drm/drm_panel.h     | 10 ++++++++++
> >  2 files changed, 18 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> > index f634371c717a..4a512ca80673 100644
> > --- a/drivers/gpu/drm/drm_panel.c
> > +++ b/drivers/gpu/drm/drm_panel.c
> > @@ -223,6 +223,14 @@ int drm_panel_get_modes(struct drm_panel *panel,
> >  }
> >  EXPORT_SYMBOL(drm_panel_get_modes);
> >
> > +enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel)
> > +{
> > +       if (panel && panel->funcs && panel->funcs->get_orientation)
> > +               return panel->funcs->get_orientation(panel);
> > +
> > +       return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > +}
> > +EXPORT_SYMBOL(drm_panel_get_orientation);
> >  #ifdef CONFIG_OF
>
> nit: there used to be a blank line before the #ifdef but there no
> longer is after your patch.
>
Added in v4.
> Other than that...
>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v3 1/8] drm/panel: Add an API drm_panel_get_orientation() to return panel orientation

[Hsin-Yi Wang]

On Mon, Jun 6, 2022 at 10:21 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
> >
> > Panels usually call drm_connector_set_panel_orientation(), which is
> > later than drm/kms driver calling drm_dev_register(). This leads to a
> > WARN().
> >
> > The orientation property is known earlier. For example, some panels
> > parse the property through device tree during probe.
> >
> > Add an API to return the property from panel to drm/kms driver, so the
> > drivers are able to call drm_connector_set_panel_orientation() before
> > drm_dev_register().
> >
> > Suggested-by: Hans de Goede <hdegoede@redhat.com>
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> > ---
> > v2->v3: no change
> > ---
> >  drivers/gpu/drm/drm_panel.c |  8 ++++++++
> >  include/drm/drm_panel.h     | 10 ++++++++++
> >  2 files changed, 18 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> > index f634371c717a..4a512ca80673 100644
> > --- a/drivers/gpu/drm/drm_panel.c
> > +++ b/drivers/gpu/drm/drm_panel.c
> > @@ -223,6 +223,14 @@ int drm_panel_get_modes(struct drm_panel *panel,
> >  }
> >  EXPORT_SYMBOL(drm_panel_get_modes);
> >
> > +enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel)
> > +{
> > +       if (panel && panel->funcs && panel->funcs->get_orientation)
> > +               return panel->funcs->get_orientation(panel);
> > +
> > +       return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > +}
> > +EXPORT_SYMBOL(drm_panel_get_orientation);
> >  #ifdef CONFIG_OF
>
> nit: there used to be a blank line before the #ifdef but there no
> longer is after your patch.
>
Added in v4.
> Other than that...
>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v3 1/8] drm/panel: Add an API drm_panel_get_orientation() to return panel orientation

[Hsin-Yi Wang]

On Mon, Jun 6, 2022 at 10:21 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Sun, Jun 5, 2022 at 9:47 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
> >
> > Panels usually call drm_connector_set_panel_orientation(), which is
> > later than drm/kms driver calling drm_dev_register(). This leads to a
> > WARN().
> >
> > The orientation property is known earlier. For example, some panels
> > parse the property through device tree during probe.
> >
> > Add an API to return the property from panel to drm/kms driver, so the
> > drivers are able to call drm_connector_set_panel_orientation() before
> > drm_dev_register().
> >
> > Suggested-by: Hans de Goede <hdegoede@redhat.com>
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> > ---
> > v2->v3: no change
> > ---
> >  drivers/gpu/drm/drm_panel.c |  8 ++++++++
> >  include/drm/drm_panel.h     | 10 ++++++++++
> >  2 files changed, 18 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> > index f634371c717a..4a512ca80673 100644
> > --- a/drivers/gpu/drm/drm_panel.c
> > +++ b/drivers/gpu/drm/drm_panel.c
> > @@ -223,6 +223,14 @@ int drm_panel_get_modes(struct drm_panel *panel,
> >  }
> >  EXPORT_SYMBOL(drm_panel_get_modes);
> >
> > +enum drm_panel_orientation drm_panel_get_orientation(struct drm_panel *panel)
> > +{
> > +       if (panel && panel->funcs && panel->funcs->get_orientation)
> > +               return panel->funcs->get_orientation(panel);
> > +
> > +       return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > +}
> > +EXPORT_SYMBOL(drm_panel_get_orientation);
> >  #ifdef CONFIG_OF
>
> nit: there used to be a blank line before the #ifdef but there no
> longer is after your patch.
>
Added in v4.
> Other than that...
>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel