All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
	linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	Johan Hovold <johan@kernel.org>
Subject: [RFC PATCH 25/28] phy: qcom-qmp: pcs-v3: add missing registers
Date: Fri, 10 Jun 2022 22:09:22 +0300	[thread overview]
Message-ID: <20220610190925.3670081-26-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220610190925.3670081-1-dmitry.baryshkov@linaro.org>

Add missing registers, verified against:
- msm-4.19's qcom,usb3-11nm-qmp-combo.h

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h | 82 ++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h
index ac13f2989a73..10dbbb006201 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h
@@ -7,7 +7,9 @@
 #define QCOM_PHY_QMP_PCS_V3_H_
 
 /* Only for QMP V3 PHY - PCS registers */
+#define QPHY_V3_PCS_SW_RESET				0x000
 #define QPHY_V3_PCS_POWER_DOWN_CONTROL			0x004
+#define QPHY_V3_PCS_START_CONTROL			0x008
 #define QPHY_V3_PCS_TXMGN_V0				0x00c
 #define QPHY_V3_PCS_TXMGN_V1				0x010
 #define QPHY_V3_PCS_TXMGN_V2				0x014
@@ -31,6 +33,7 @@
 #define QPHY_V3_PCS_RATE_SLEW_CNTRL			0x05c
 #define QPHY_V3_PCS_POWER_STATE_CONFIG1			0x060
 #define QPHY_V3_PCS_POWER_STATE_CONFIG2			0x064
+#define QPHY_V3_PCS_POWER_STATE_CONFIG3			0x068
 #define QPHY_V3_PCS_POWER_STATE_CONFIG4			0x06c
 #define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L		0x070
 #define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H		0x074
@@ -40,24 +43,103 @@
 #define QPHY_V3_PCS_LOCK_DETECT_CONFIG2			0x084
 #define QPHY_V3_PCS_LOCK_DETECT_CONFIG3			0x088
 #define QPHY_V3_PCS_TSYNC_RSYNC_TIME			0x08c
+#define QPHY_V3_PCS_SIGDET_LOW_2_IDLE_TIME		0x090
+#define QPHY_V3_PCS_BEACON_2_IDLE_TIME_L		0x094
+#define QPHY_V3_PCS_BEACON_2_IDLE_TIME_H		0x098
+#define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_SYSCLK		0x09c
 #define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK		0x0a0
 #define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK		0x0a4
 #define QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME		0x0a8
+#define QPHY_V3_PCS_LFPS_DET_HIGH_COUNT_VAL		0x0ac
 #define QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK		0x0b0
+#define QPHY_V3_PCS_LFPS_TX_END_CNT_P2U3_START		0x0b4
 #define QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME		0x0b8
 #define QPHY_V3_PCS_RXEQTRAINING_RUN_TIME		0x0bc
+#define QPHY_V3_PCS_TXONESZEROS_RUN_LENGTH		0x0c0
 #define QPHY_V3_PCS_FLL_CNTRL1				0x0c4
 #define QPHY_V3_PCS_FLL_CNTRL2				0x0c8
 #define QPHY_V3_PCS_FLL_CNT_VAL_L			0x0cc
 #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL			0x0d0
 #define QPHY_V3_PCS_FLL_MAN_CODE			0x0d4
+#define QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL		0x0d8
+#define QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR		0x0dc
+#define QPHY_V3_PCS_ARCVR_DTCT_EN_PERIOD		0x0e0
+#define QPHY_V3_PCS_ARCVR_DTCT_CM_DLY			0x0e4
+#define QPHY_V3_PCS_ALFPS_DEGLITCH_VAL			0x0e8
+#define QPHY_V3_PCS_INSIG_SW_CTRL1			0x0ec
+#define QPHY_V3_PCS_INSIG_SW_CTRL2			0x0f0
+#define QPHY_V3_PCS_INSIG_SW_CTRL3			0x0f4
+#define QPHY_V3_PCS_INSIG_MX_CTRL1			0x0f8
+#define QPHY_V3_PCS_INSIG_MX_CTRL2			0x0fc
+#define QPHY_V3_PCS_INSIG_MX_CTRL3			0x100
+#define QPHY_V3_PCS_OUTSIG_SW_CTRL1			0x104
+#define QPHY_V3_PCS_OUTSIG_MX_CTRL1			0x108
+#define QPHY_V3_PCS_CLK_DEBUG_BYPASS_CTRL		0x10c
+#define QPHY_V3_PCS_TEST_CONTROL			0x110
+#define QPHY_V3_PCS_TEST_CONTROL2			0x114
+#define QPHY_V3_PCS_TEST_CONTROL3			0x118
+#define QPHY_V3_PCS_TEST_CONTROL4			0x11c
+#define QPHY_V3_PCS_TEST_CONTROL5			0x120
+#define QPHY_V3_PCS_TEST_CONTROL6			0x124
+#define QPHY_V3_PCS_TEST_CONTROL7			0x128
+#define QPHY_V3_PCS_COM_RESET_CONTROL			0x12c
+#define QPHY_V3_PCS_BIST_CTRL				0x130
+#define QPHY_V3_PCS_PRBS_POLY0				0x134
+#define QPHY_V3_PCS_PRBS_POLY1				0x138
+#define QPHY_V3_PCS_PRBS_SEED0				0x13c
+#define QPHY_V3_PCS_PRBS_SEED1				0x140
+#define QPHY_V3_PCS_FIXED_PAT_CTRL			0x144
+#define QPHY_V3_PCS_FIXED_PAT0				0x148
+#define QPHY_V3_PCS_FIXED_PAT1				0x14c
+#define QPHY_V3_PCS_FIXED_PAT2				0x150
+#define QPHY_V3_PCS_FIXED_PAT3				0x154
+#define QPHY_V3_PCS_COM_CLK_SWITCH_CTRL			0x158
+#define QPHY_V3_PCS_ELECIDLE_DLY_SEL			0x15c
+#define QPHY_V3_PCS_SPARE1				0x160
+#define QPHY_V3_PCS_BIST_CHK_ERR_CNT_L_STATUS		0x164
+#define QPHY_V3_PCS_BIST_CHK_ERR_CNT_H_STATUS		0x168
+#define QPHY_V3_PCS_BIST_CHK_STATUS			0x16c
+#define QPHY_V3_PCS_LFPS_RXTERM_IRQ_SOURCE_STATUS	0x170
+#define QPHY_V3_PCS_PCS_STATUS				0x174
+#define QPHY_V3_PCS_PCS_STATUS2				0x178
+#define QPHY_V3_PCS_PCS_STATUS3				0x17c
+#define QPHY_V3_PCS_COM_RESET_STATUS			0x180
+#define QPHY_V3_PCS_OSC_DTCT_STATUS			0x184
+#define QPHY_V3_PCS_REVISION_ID0			0x188
+#define QPHY_V3_PCS_REVISION_ID1			0x18c
+#define QPHY_V3_PCS_REVISION_ID2			0x190
+#define QPHY_V3_PCS_REVISION_ID3			0x194
+#define QPHY_V3_PCS_DEBUG_BUS_0_STATUS			0x198
+#define QPHY_V3_PCS_DEBUG_BUS_1_STATUS			0x19c
+#define QPHY_V3_PCS_DEBUG_BUS_2_STATUS			0x1a0
+#define QPHY_V3_PCS_DEBUG_BUS_3_STATUS			0x1a4
 #define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1a8
 #define QPHY_V3_PCS_OSC_DTCT_ACTIONS			0x1ac
 #define QPHY_V3_PCS_SIGDET_CNTRL			0x1b0
+#define QPHY_V3_PCS_IDAC_CAL_CNTRL			0x1b4
+#define QPHY_V3_PCS_CMN_ACK_OUT_SEL			0x1b8
+#define QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME_SYSCLK	0x1bc
+#define QPHY_V3_PCS_AUTONOMOUS_MODE_STATUS		0x1c0
+#define QPHY_V3_PCS_ENDPOINT_REFCLK_CNTRL		0x1c4
+#define QPHY_V3_PCS_EPCLK_PRE_PLL_LOCK_DLY_SYSCLK	0x1c8
+#define QPHY_V3_PCS_EPCLK_PRE_PLL_LOCK_DLY_AUXCLK	0x1cc
+#define QPHY_V3_PCS_EPCLK_DLY_COUNT_VAL_L		0x1d0
+#define QPHY_V3_PCS_EPCLK_DLY_COUNT_VAL_H		0x1d4
 #define QPHY_V3_PCS_RX_SIGDET_LVL			0x1d8
 #define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB	0x1dc
 #define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1e0
+#define QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL2		0x1e4
+#define QPHY_V3_PCS_RXTERMINATION_DLY_SEL		0x1e8
+#define QPHY_V3_PCS_LFPS_PER_TIMER_VAL			0x1ec
+#define QPHY_V3_PCS_SIGDET_STARTUP_TIMER_VAL		0x1f0
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG4			0x1f4
+#define QPHY_V3_PCS_RX_SIGDET_DTCT_CNTRL		0x1f8
+#define QPHY_V3_PCS_PCS_STATUS4				0x1fc
+#define QPHY_V3_PCS_PCS_STATUS4_CLEAR			0x200
+#define QPHY_V3_PCS_DEC_ERROR_COUNT_STATUS		0x204
+#define QPHY_V3_PCS_COMMA_POS_STATUS			0x208
 #define QPHY_V3_PCS_REFGEN_REQ_CONFIG1			0x20c
 #define QPHY_V3_PCS_REFGEN_REQ_CONFIG2			0x210
+#define QPHY_V3_PCS_REFGEN_REQ_CONFIG3			0x214
 
 #endif
-- 
2.35.1


WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
	linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	Johan Hovold <johan@kernel.org>
Subject: [RFC PATCH 25/28] phy: qcom-qmp: pcs-v3: add missing registers
Date: Fri, 10 Jun 2022 22:09:22 +0300	[thread overview]
Message-ID: <20220610190925.3670081-26-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220610190925.3670081-1-dmitry.baryshkov@linaro.org>

Add missing registers, verified against:
- msm-4.19's qcom,usb3-11nm-qmp-combo.h

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h | 82 ++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h
index ac13f2989a73..10dbbb006201 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h
@@ -7,7 +7,9 @@
 #define QCOM_PHY_QMP_PCS_V3_H_
 
 /* Only for QMP V3 PHY - PCS registers */
+#define QPHY_V3_PCS_SW_RESET				0x000
 #define QPHY_V3_PCS_POWER_DOWN_CONTROL			0x004
+#define QPHY_V3_PCS_START_CONTROL			0x008
 #define QPHY_V3_PCS_TXMGN_V0				0x00c
 #define QPHY_V3_PCS_TXMGN_V1				0x010
 #define QPHY_V3_PCS_TXMGN_V2				0x014
@@ -31,6 +33,7 @@
 #define QPHY_V3_PCS_RATE_SLEW_CNTRL			0x05c
 #define QPHY_V3_PCS_POWER_STATE_CONFIG1			0x060
 #define QPHY_V3_PCS_POWER_STATE_CONFIG2			0x064
+#define QPHY_V3_PCS_POWER_STATE_CONFIG3			0x068
 #define QPHY_V3_PCS_POWER_STATE_CONFIG4			0x06c
 #define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L		0x070
 #define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H		0x074
@@ -40,24 +43,103 @@
 #define QPHY_V3_PCS_LOCK_DETECT_CONFIG2			0x084
 #define QPHY_V3_PCS_LOCK_DETECT_CONFIG3			0x088
 #define QPHY_V3_PCS_TSYNC_RSYNC_TIME			0x08c
+#define QPHY_V3_PCS_SIGDET_LOW_2_IDLE_TIME		0x090
+#define QPHY_V3_PCS_BEACON_2_IDLE_TIME_L		0x094
+#define QPHY_V3_PCS_BEACON_2_IDLE_TIME_H		0x098
+#define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_SYSCLK		0x09c
 #define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK		0x0a0
 #define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK		0x0a4
 #define QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME		0x0a8
+#define QPHY_V3_PCS_LFPS_DET_HIGH_COUNT_VAL		0x0ac
 #define QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK		0x0b0
+#define QPHY_V3_PCS_LFPS_TX_END_CNT_P2U3_START		0x0b4
 #define QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME		0x0b8
 #define QPHY_V3_PCS_RXEQTRAINING_RUN_TIME		0x0bc
+#define QPHY_V3_PCS_TXONESZEROS_RUN_LENGTH		0x0c0
 #define QPHY_V3_PCS_FLL_CNTRL1				0x0c4
 #define QPHY_V3_PCS_FLL_CNTRL2				0x0c8
 #define QPHY_V3_PCS_FLL_CNT_VAL_L			0x0cc
 #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL			0x0d0
 #define QPHY_V3_PCS_FLL_MAN_CODE			0x0d4
+#define QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL		0x0d8
+#define QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR		0x0dc
+#define QPHY_V3_PCS_ARCVR_DTCT_EN_PERIOD		0x0e0
+#define QPHY_V3_PCS_ARCVR_DTCT_CM_DLY			0x0e4
+#define QPHY_V3_PCS_ALFPS_DEGLITCH_VAL			0x0e8
+#define QPHY_V3_PCS_INSIG_SW_CTRL1			0x0ec
+#define QPHY_V3_PCS_INSIG_SW_CTRL2			0x0f0
+#define QPHY_V3_PCS_INSIG_SW_CTRL3			0x0f4
+#define QPHY_V3_PCS_INSIG_MX_CTRL1			0x0f8
+#define QPHY_V3_PCS_INSIG_MX_CTRL2			0x0fc
+#define QPHY_V3_PCS_INSIG_MX_CTRL3			0x100
+#define QPHY_V3_PCS_OUTSIG_SW_CTRL1			0x104
+#define QPHY_V3_PCS_OUTSIG_MX_CTRL1			0x108
+#define QPHY_V3_PCS_CLK_DEBUG_BYPASS_CTRL		0x10c
+#define QPHY_V3_PCS_TEST_CONTROL			0x110
+#define QPHY_V3_PCS_TEST_CONTROL2			0x114
+#define QPHY_V3_PCS_TEST_CONTROL3			0x118
+#define QPHY_V3_PCS_TEST_CONTROL4			0x11c
+#define QPHY_V3_PCS_TEST_CONTROL5			0x120
+#define QPHY_V3_PCS_TEST_CONTROL6			0x124
+#define QPHY_V3_PCS_TEST_CONTROL7			0x128
+#define QPHY_V3_PCS_COM_RESET_CONTROL			0x12c
+#define QPHY_V3_PCS_BIST_CTRL				0x130
+#define QPHY_V3_PCS_PRBS_POLY0				0x134
+#define QPHY_V3_PCS_PRBS_POLY1				0x138
+#define QPHY_V3_PCS_PRBS_SEED0				0x13c
+#define QPHY_V3_PCS_PRBS_SEED1				0x140
+#define QPHY_V3_PCS_FIXED_PAT_CTRL			0x144
+#define QPHY_V3_PCS_FIXED_PAT0				0x148
+#define QPHY_V3_PCS_FIXED_PAT1				0x14c
+#define QPHY_V3_PCS_FIXED_PAT2				0x150
+#define QPHY_V3_PCS_FIXED_PAT3				0x154
+#define QPHY_V3_PCS_COM_CLK_SWITCH_CTRL			0x158
+#define QPHY_V3_PCS_ELECIDLE_DLY_SEL			0x15c
+#define QPHY_V3_PCS_SPARE1				0x160
+#define QPHY_V3_PCS_BIST_CHK_ERR_CNT_L_STATUS		0x164
+#define QPHY_V3_PCS_BIST_CHK_ERR_CNT_H_STATUS		0x168
+#define QPHY_V3_PCS_BIST_CHK_STATUS			0x16c
+#define QPHY_V3_PCS_LFPS_RXTERM_IRQ_SOURCE_STATUS	0x170
+#define QPHY_V3_PCS_PCS_STATUS				0x174
+#define QPHY_V3_PCS_PCS_STATUS2				0x178
+#define QPHY_V3_PCS_PCS_STATUS3				0x17c
+#define QPHY_V3_PCS_COM_RESET_STATUS			0x180
+#define QPHY_V3_PCS_OSC_DTCT_STATUS			0x184
+#define QPHY_V3_PCS_REVISION_ID0			0x188
+#define QPHY_V3_PCS_REVISION_ID1			0x18c
+#define QPHY_V3_PCS_REVISION_ID2			0x190
+#define QPHY_V3_PCS_REVISION_ID3			0x194
+#define QPHY_V3_PCS_DEBUG_BUS_0_STATUS			0x198
+#define QPHY_V3_PCS_DEBUG_BUS_1_STATUS			0x19c
+#define QPHY_V3_PCS_DEBUG_BUS_2_STATUS			0x1a0
+#define QPHY_V3_PCS_DEBUG_BUS_3_STATUS			0x1a4
 #define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1a8
 #define QPHY_V3_PCS_OSC_DTCT_ACTIONS			0x1ac
 #define QPHY_V3_PCS_SIGDET_CNTRL			0x1b0
+#define QPHY_V3_PCS_IDAC_CAL_CNTRL			0x1b4
+#define QPHY_V3_PCS_CMN_ACK_OUT_SEL			0x1b8
+#define QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME_SYSCLK	0x1bc
+#define QPHY_V3_PCS_AUTONOMOUS_MODE_STATUS		0x1c0
+#define QPHY_V3_PCS_ENDPOINT_REFCLK_CNTRL		0x1c4
+#define QPHY_V3_PCS_EPCLK_PRE_PLL_LOCK_DLY_SYSCLK	0x1c8
+#define QPHY_V3_PCS_EPCLK_PRE_PLL_LOCK_DLY_AUXCLK	0x1cc
+#define QPHY_V3_PCS_EPCLK_DLY_COUNT_VAL_L		0x1d0
+#define QPHY_V3_PCS_EPCLK_DLY_COUNT_VAL_H		0x1d4
 #define QPHY_V3_PCS_RX_SIGDET_LVL			0x1d8
 #define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB	0x1dc
 #define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1e0
+#define QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL2		0x1e4
+#define QPHY_V3_PCS_RXTERMINATION_DLY_SEL		0x1e8
+#define QPHY_V3_PCS_LFPS_PER_TIMER_VAL			0x1ec
+#define QPHY_V3_PCS_SIGDET_STARTUP_TIMER_VAL		0x1f0
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG4			0x1f4
+#define QPHY_V3_PCS_RX_SIGDET_DTCT_CNTRL		0x1f8
+#define QPHY_V3_PCS_PCS_STATUS4				0x1fc
+#define QPHY_V3_PCS_PCS_STATUS4_CLEAR			0x200
+#define QPHY_V3_PCS_DEC_ERROR_COUNT_STATUS		0x204
+#define QPHY_V3_PCS_COMMA_POS_STATUS			0x208
 #define QPHY_V3_PCS_REFGEN_REQ_CONFIG1			0x20c
 #define QPHY_V3_PCS_REFGEN_REQ_CONFIG2			0x210
+#define QPHY_V3_PCS_REFGEN_REQ_CONFIG3			0x214
 
 #endif
-- 
2.35.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2022-06-10 19:10 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-10 19:08 [RFC PATCH 00/28] phy: qcom-qmp: split register tables Dmitry Baryshkov
2022-06-10 19:08 ` Dmitry Baryshkov
2022-06-10 19:08 ` [RFC PATCH 01/28] phy: qcom-qmp: fix the QSERDES_V5_COM_CMN_MODE register Dmitry Baryshkov
2022-06-10 19:08   ` Dmitry Baryshkov
2022-06-10 19:08 ` [RFC PATCH 02/28] phy: qcom-qmp-ufs: remove spurious register write in the msm8996 table Dmitry Baryshkov
2022-06-10 19:08   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 03/28] phy: qcom-qmp-combo,usb: add support for separate PCS_USB region Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 04/28] phy: qcom-qmp-pcie: split pcs_misc region for ipq6018 pcie gen3 Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 05/28] phy: qcom-qmp: drop special QMP V2 PCIE gen3 defines Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 06/28] phy: qcom-qmp: rename QMP V2 PCS registers Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 07/28] phy: qcom-qmp: use QPHY_V4_PCS for ipq6018 PCIe gen3 Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 08/28] phy: qcom-qmp: move QSERDES registers to separate header Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 09/28] phy: qcom-qmp: move QSERDES V3 registers to separate headers Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 10/28] phy: qcom-qmp: move QSERDES V4 " Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 11/28] phy: qcom-qmp: move QSERDES V5 " Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 12/28] phy: qcom-qmp: move QSERDES PLL registers to separate header Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 13/28] phy: qcom-qmp: move PCS V2 " Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 14/28] phy: qcom-qmp: move PCS V3 registers to separate headers Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 15/28] phy: qcom-qmp: move PCS V4 " Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 16/28] phy: qcom-qmp: move PCS V5 " Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 17/28] phy: qcom-qmp: move PCIE QHP registers to separate header Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 18/28] phy: qcom-qmp: split allegedly 4.20 and 5.20 TX/RX registers Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 19/28] phy: qcom-qmp: split allegedly 4.20 and 5.20 PCS registers Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 20/28] phy: qcom-qmp: split PCS_UFS V3 symbols to separate header Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 21/28] phy: qcom-qmp: qserdes-com: add missing registers Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 22/28] phy: qcom-qmp: qserdes-com-v3: " Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 23/28] phy: qcom-qmp: qserdes-com-v4: " Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 24/28] phy: qcom-qmp: qserdes-com-v5: " Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` Dmitry Baryshkov [this message]
2022-06-10 19:09   ` [RFC PATCH 25/28] phy: qcom-qmp: pcs-v3: " Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 26/28] phy: qcom-qmp: pcs-pcie-v4: " Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 27/28] phy: qcom-qmp-usb: replace FLL layout writes for msm8996 Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-06-10 19:09 ` [RFC PATCH 28/28] phy: qcom-qmp-usb: define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME register Dmitry Baryshkov
2022-06-10 19:09   ` Dmitry Baryshkov
2022-07-05  7:05 ` [RFC PATCH 00/28] phy: qcom-qmp: split register tables Vinod Koul
2022-07-05  7:05   ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220610190925.3670081-26-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=johan@kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=p.zabel@pengutronix.de \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.