[PATCH v4 0/5] RK3568 PCIe V3 support

[PATCH v4 0/5] RK3568 PCIe V3 support

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

This series adds Rockchip PCIe V3 support found on rk3568 SOC.

Compared to PCIeV2 which uses the Naneng combphy, PCIe v3 uses a dedicated
PCI-phy.

Frank Wunderlich (4):
  dt-bindings: phy: rockchip: add PCIe v3 phy
  dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf
  arm64: dts: rockchip: rk3568: Add PCIe v3 nodes
  arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro

Shawn Lin (1):
  phy: rockchip: Support PCIe v3

 .../bindings/phy/rockchip,pcie3-phy.yaml      |  80 +++++
 .../devicetree/bindings/soc/rockchip/grf.yaml |   3 +
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   |  90 +++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      | 122 +++++++
 drivers/phy/rockchip/Kconfig                  |   9 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
 include/linux/phy/pcie.h                      |  12 +
 8 files changed, 634 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
 create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
 create mode 100644 include/linux/phy/pcie.h

-- 
2.34.1

[PATCH v4 0/5] RK3568 PCIe V3 support

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

This series adds Rockchip PCIe V3 support found on rk3568 SOC.

Compared to PCIeV2 which uses the Naneng combphy, PCIe v3 uses a dedicated
PCI-phy.

Frank Wunderlich (4):
  dt-bindings: phy: rockchip: add PCIe v3 phy
  dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf
  arm64: dts: rockchip: rk3568: Add PCIe v3 nodes
  arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro

Shawn Lin (1):
  phy: rockchip: Support PCIe v3

 .../bindings/phy/rockchip,pcie3-phy.yaml      |  80 +++++
 .../devicetree/bindings/soc/rockchip/grf.yaml |   3 +
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   |  90 +++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      | 122 +++++++
 drivers/phy/rockchip/Kconfig                  |   9 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
 include/linux/phy/pcie.h                      |  12 +
 8 files changed, 634 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
 create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
 create mode 100644 include/linux/phy/pcie.h

-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 0/5] RK3568 PCIe V3 support

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

This series adds Rockchip PCIe V3 support found on rk3568 SOC.

Compared to PCIeV2 which uses the Naneng combphy, PCIe v3 uses a dedicated
PCI-phy.

Frank Wunderlich (4):
  dt-bindings: phy: rockchip: add PCIe v3 phy
  dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf
  arm64: dts: rockchip: rk3568: Add PCIe v3 nodes
  arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro

Shawn Lin (1):
  phy: rockchip: Support PCIe v3

 .../bindings/phy/rockchip,pcie3-phy.yaml      |  80 +++++
 .../devicetree/bindings/soc/rockchip/grf.yaml |   3 +
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   |  90 +++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      | 122 +++++++
 drivers/phy/rockchip/Kconfig                  |   9 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
 include/linux/phy/pcie.h                      |  12 +
 8 files changed, 634 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
 create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
 create mode 100644 include/linux/phy/pcie.h

-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v4 0/5] RK3568 PCIe V3 support

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

This series adds Rockchip PCIe V3 support found on rk3568 SOC.

Compared to PCIeV2 which uses the Naneng combphy, PCIe v3 uses a dedicated
PCI-phy.

Frank Wunderlich (4):
  dt-bindings: phy: rockchip: add PCIe v3 phy
  dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf
  arm64: dts: rockchip: rk3568: Add PCIe v3 nodes
  arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro

Shawn Lin (1):
  phy: rockchip: Support PCIe v3

 .../bindings/phy/rockchip,pcie3-phy.yaml      |  80 +++++
 .../devicetree/bindings/soc/rockchip/grf.yaml |   3 +
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   |  90 +++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      | 122 +++++++
 drivers/phy/rockchip/Kconfig                  |   9 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
 include/linux/phy/pcie.h                      |  12 +
 8 files changed, 634 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
 create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
 create mode 100644 include/linux/phy/pcie.h

-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add a new binding file for Rockchip PCIe v3 phy driver.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v4:
- add reviewed-by
- remove minitems for clock-names as i have static list to fix error
- fix reg error by using 32-bit adressing in binding example
- change lane-map to u32 data-lanes
- tried to move data-lanes to phy-provider
  https://github.com/frank-w/dt-schema/blob/main/dtschema/schemas/phy/phy-provider.yaml#L17
  cloned and installed via pip install -e <local path>
  verified with pip show, but phy-privider seems not to be applied

v3:
- drop quotes
- drop rk3588
- make clockcount fixed to 3
- full path for binding header file
- drop phy-mode and its header and add lane-map

v2:
dt-bindings: rename yaml for PCIe v3
rockchip-pcie3-phy.yaml => rockchip,pcie3-phy.yaml

changes in pcie3 phy yaml
- change clock names to ordered const list
- extend pcie30-phymode description
- add phy-cells to required properties
- drop unevaluatedProperties
- example with 1 clock each line
- use default property instead of text describing it
- update license
---
 .../bindings/phy/rockchip,pcie3-phy.yaml      | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
new file mode 100644
index 000000000000..9f2d8d2cc7a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,pcie3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PCIe v3 phy
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-pcie3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: refclk_m
+      - const: refclk_n
+      - const: pclk
+
+  data-lanes:
+    description: which lanes (by position) should be mapped to which
+      controller (value). 0 means lane disabled, higher value means used.
+      (controller-number +1 )
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 16
+
+  "#phy-cells":
+    const: 0
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: phy
+
+  rockchip,phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the phy "general register files"
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the pipe "general register files"
+
+required:
+  - compatible
+  - reg
+  - rockchip,phy-grf
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    pcie30phy: phy@fe8c0000 {
+      compatible = "rockchip,rk3568-pcie3-phy";
+      reg = <0xfe8c0000 0x20000>;
+      #phy-cells = <0>;
+      clocks = <&pmucru CLK_PCIE30PHY_REF_M>,
+               <&pmucru CLK_PCIE30PHY_REF_N>,
+               <&cru PCLK_PCIE30PHY>;
+      clock-names = "refclk_m", "refclk_n", "pclk";
+      resets = <&cru SRST_PCIE30PHY>;
+      reset-names = "phy";
+      rockchip,phy-grf = <&pcie30_phy_grf>;
+    };
-- 
2.34.1

[PATCH v4 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add a new binding file for Rockchip PCIe v3 phy driver.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v4:
- add reviewed-by
- remove minitems for clock-names as i have static list to fix error
- fix reg error by using 32-bit adressing in binding example
- change lane-map to u32 data-lanes
- tried to move data-lanes to phy-provider
  https://github.com/frank-w/dt-schema/blob/main/dtschema/schemas/phy/phy-provider.yaml#L17
  cloned and installed via pip install -e <local path>
  verified with pip show, but phy-privider seems not to be applied

v3:
- drop quotes
- drop rk3588
- make clockcount fixed to 3
- full path for binding header file
- drop phy-mode and its header and add lane-map

v2:
dt-bindings: rename yaml for PCIe v3
rockchip-pcie3-phy.yaml => rockchip,pcie3-phy.yaml

changes in pcie3 phy yaml
- change clock names to ordered const list
- extend pcie30-phymode description
- add phy-cells to required properties
- drop unevaluatedProperties
- example with 1 clock each line
- use default property instead of text describing it
- update license
---
 .../bindings/phy/rockchip,pcie3-phy.yaml      | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
new file mode 100644
index 000000000000..9f2d8d2cc7a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,pcie3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PCIe v3 phy
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-pcie3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: refclk_m
+      - const: refclk_n
+      - const: pclk
+
+  data-lanes:
+    description: which lanes (by position) should be mapped to which
+      controller (value). 0 means lane disabled, higher value means used.
+      (controller-number +1 )
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 16
+
+  "#phy-cells":
+    const: 0
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: phy
+
+  rockchip,phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the phy "general register files"
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the pipe "general register files"
+
+required:
+  - compatible
+  - reg
+  - rockchip,phy-grf
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    pcie30phy: phy@fe8c0000 {
+      compatible = "rockchip,rk3568-pcie3-phy";
+      reg = <0xfe8c0000 0x20000>;
+      #phy-cells = <0>;
+      clocks = <&pmucru CLK_PCIE30PHY_REF_M>,
+               <&pmucru CLK_PCIE30PHY_REF_N>,
+               <&cru PCLK_PCIE30PHY>;
+      clock-names = "refclk_m", "refclk_n", "pclk";
+      resets = <&cru SRST_PCIE30PHY>;
+      reset-names = "phy";
+      rockchip,phy-grf = <&pcie30_phy_grf>;
+    };
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add a new binding file for Rockchip PCIe v3 phy driver.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v4:
- add reviewed-by
- remove minitems for clock-names as i have static list to fix error
- fix reg error by using 32-bit adressing in binding example
- change lane-map to u32 data-lanes
- tried to move data-lanes to phy-provider
  https://github.com/frank-w/dt-schema/blob/main/dtschema/schemas/phy/phy-provider.yaml#L17
  cloned and installed via pip install -e <local path>
  verified with pip show, but phy-privider seems not to be applied

v3:
- drop quotes
- drop rk3588
- make clockcount fixed to 3
- full path for binding header file
- drop phy-mode and its header and add lane-map

v2:
dt-bindings: rename yaml for PCIe v3
rockchip-pcie3-phy.yaml => rockchip,pcie3-phy.yaml

changes in pcie3 phy yaml
- change clock names to ordered const list
- extend pcie30-phymode description
- add phy-cells to required properties
- drop unevaluatedProperties
- example with 1 clock each line
- use default property instead of text describing it
- update license
---
 .../bindings/phy/rockchip,pcie3-phy.yaml      | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
new file mode 100644
index 000000000000..9f2d8d2cc7a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,pcie3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PCIe v3 phy
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-pcie3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: refclk_m
+      - const: refclk_n
+      - const: pclk
+
+  data-lanes:
+    description: which lanes (by position) should be mapped to which
+      controller (value). 0 means lane disabled, higher value means used.
+      (controller-number +1 )
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 16
+
+  "#phy-cells":
+    const: 0
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: phy
+
+  rockchip,phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the phy "general register files"
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the pipe "general register files"
+
+required:
+  - compatible
+  - reg
+  - rockchip,phy-grf
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    pcie30phy: phy@fe8c0000 {
+      compatible = "rockchip,rk3568-pcie3-phy";
+      reg = <0xfe8c0000 0x20000>;
+      #phy-cells = <0>;
+      clocks = <&pmucru CLK_PCIE30PHY_REF_M>,
+               <&pmucru CLK_PCIE30PHY_REF_N>,
+               <&cru PCLK_PCIE30PHY>;
+      clock-names = "refclk_m", "refclk_n", "pclk";
+      resets = <&cru SRST_PCIE30PHY>;
+      reset-names = "phy";
+      rockchip,phy-grf = <&pcie30_phy_grf>;
+    };
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v4 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add a new binding file for Rockchip PCIe v3 phy driver.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v4:
- add reviewed-by
- remove minitems for clock-names as i have static list to fix error
- fix reg error by using 32-bit adressing in binding example
- change lane-map to u32 data-lanes
- tried to move data-lanes to phy-provider
  https://github.com/frank-w/dt-schema/blob/main/dtschema/schemas/phy/phy-provider.yaml#L17
  cloned and installed via pip install -e <local path>
  verified with pip show, but phy-privider seems not to be applied

v3:
- drop quotes
- drop rk3588
- make clockcount fixed to 3
- full path for binding header file
- drop phy-mode and its header and add lane-map

v2:
dt-bindings: rename yaml for PCIe v3
rockchip-pcie3-phy.yaml => rockchip,pcie3-phy.yaml

changes in pcie3 phy yaml
- change clock names to ordered const list
- extend pcie30-phymode description
- add phy-cells to required properties
- drop unevaluatedProperties
- example with 1 clock each line
- use default property instead of text describing it
- update license
---
 .../bindings/phy/rockchip,pcie3-phy.yaml      | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
new file mode 100644
index 000000000000..9f2d8d2cc7a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,pcie3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PCIe v3 phy
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-pcie3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: refclk_m
+      - const: refclk_n
+      - const: pclk
+
+  data-lanes:
+    description: which lanes (by position) should be mapped to which
+      controller (value). 0 means lane disabled, higher value means used.
+      (controller-number +1 )
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 16
+
+  "#phy-cells":
+    const: 0
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: phy
+
+  rockchip,phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the phy "general register files"
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the pipe "general register files"
+
+required:
+  - compatible
+  - reg
+  - rockchip,phy-grf
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    pcie30phy: phy@fe8c0000 {
+      compatible = "rockchip,rk3568-pcie3-phy";
+      reg = <0xfe8c0000 0x20000>;
+      #phy-cells = <0>;
+      clocks = <&pmucru CLK_PCIE30PHY_REF_M>,
+               <&pmucru CLK_PCIE30PHY_REF_N>,
+               <&cru PCLK_PCIE30PHY>;
+      clock-names = "refclk_m", "refclk_n", "pclk";
+      resets = <&cru SRST_PCIE30PHY>;
+      reset-names = "phy";
+      rockchip,phy-grf = <&pcie30_phy_grf>;
+    };
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 2/5] dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add compatibles for PCIe v3 General Register Files.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v4:
- rebase on 5.19-rc1
- add acked-by

v3:
- fix order of grf-bindings

v2:
- add soc-part to pcie3-phy-grf
---
 Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 75a2b8bb25fb..97301c470173 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -16,9 +16,12 @@ properties:
           - enum:
               - rockchip,rk3288-sgrf
               - rockchip,rk3566-pipe-grf
+              - rockchip,rk3568-pcie3-phy-grf
               - rockchip,rk3568-pipe-grf
               - rockchip,rk3568-pipe-phy-grf
               - rockchip,rk3568-usb2phy-grf
+              - rockchip,rk3588-pcie3-phy-grf
+              - rockchip,rk3588-pcie3-pipe-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
       - items:
-- 
2.34.1

[PATCH v4 2/5] dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add compatibles for PCIe v3 General Register Files.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v4:
- rebase on 5.19-rc1
- add acked-by

v3:
- fix order of grf-bindings

v2:
- add soc-part to pcie3-phy-grf
---
 Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 75a2b8bb25fb..97301c470173 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -16,9 +16,12 @@ properties:
           - enum:
               - rockchip,rk3288-sgrf
               - rockchip,rk3566-pipe-grf
+              - rockchip,rk3568-pcie3-phy-grf
               - rockchip,rk3568-pipe-grf
               - rockchip,rk3568-pipe-phy-grf
               - rockchip,rk3568-usb2phy-grf
+              - rockchip,rk3588-pcie3-phy-grf
+              - rockchip,rk3588-pcie3-pipe-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
       - items:
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 2/5] dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add compatibles for PCIe v3 General Register Files.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v4:
- rebase on 5.19-rc1
- add acked-by

v3:
- fix order of grf-bindings

v2:
- add soc-part to pcie3-phy-grf
---
 Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 75a2b8bb25fb..97301c470173 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -16,9 +16,12 @@ properties:
           - enum:
               - rockchip,rk3288-sgrf
               - rockchip,rk3566-pipe-grf
+              - rockchip,rk3568-pcie3-phy-grf
               - rockchip,rk3568-pipe-grf
               - rockchip,rk3568-pipe-phy-grf
               - rockchip,rk3568-usb2phy-grf
+              - rockchip,rk3588-pcie3-phy-grf
+              - rockchip,rk3588-pcie3-pipe-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
       - items:
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v4 2/5] dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add compatibles for PCIe v3 General Register Files.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v4:
- rebase on 5.19-rc1
- add acked-by

v3:
- fix order of grf-bindings

v2:
- add soc-part to pcie3-phy-grf
---
 Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 75a2b8bb25fb..97301c470173 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -16,9 +16,12 @@ properties:
           - enum:
               - rockchip,rk3288-sgrf
               - rockchip,rk3566-pipe-grf
+              - rockchip,rk3568-pcie3-phy-grf
               - rockchip,rk3568-pipe-grf
               - rockchip,rk3568-pipe-phy-grf
               - rockchip,rk3568-usb2phy-grf
+              - rockchip,rk3588-pcie3-phy-grf
+              - rockchip,rk3588-pcie3-pipe-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
       - items:
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Frank Wunderlich]

From: Shawn Lin <shawn.lin@rock-chips.com>

RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
It use a dedicated PCIe-phy. Add support for this.

Initial support by Shawn Lin, modifications by Peter Geis and Frank
Wunderlich.

Add data-lanes property for splitting pcie-lanes across controllers.

The data-lanes is an array where x=0 means lane is disabled and  x > 0
means controller x is assigned to phy lane.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Suggested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- change u8 lane-map to u32 data-lanes

v3:
- change dt-binding include
- change reset to devm_reset_control_get_optional_exclusive
  exit on error and lower severity of message if unset
- fix from peter: disable reg-write for phy-mode in rockchip_p3phy_probe
- move bifurcation/lane-map support from PCIe to phy driver

v2:
- move dt-bindings header into separate patch
- use BIT-macro
- make constants better readable
- use dev_err instead of pr_*
- change dt-binding include due to renaming (phy-snps-pcie3.h => phy-rockchip-pcie3.h)
- use exclusive variant of devm_reset_control_get{,_exclusive}
- fix semicolon.cocci warnings reported by kernel test robot <lkp@intel.com>

---
driver was taken from linux 5.10 based on in
https://github.com/JeffyCN/mirrors
which now has disappeared

Update phy-rockchip-snps-pcie3.c

Fix messages for data-lanes

Update phy-rockchip-snps-pcie3.c

Fix comment for data-lanes
---
 drivers/phy/rockchip/Kconfig                  |   9 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
 include/linux/phy/pcie.h                      |  12 +
 4 files changed, 339 insertions(+)
 create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
 create mode 100644 include/linux/phy/pcie.h

diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index 9022e395c056..94360fc96a6f 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -83,6 +83,15 @@ config PHY_ROCKCHIP_PCIE
 	help
 	  Enable this to support the Rockchip PCIe PHY.
 
+config PHY_ROCKCHIP_SNPS_PCIE3
+	tristate "Rockchip Snps PCIe3 PHY Driver"
+	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the Rockchip snps PCIe3 PHY.
+
 config PHY_ROCKCHIP_TYPEC
 	tristate "Rockchip TYPEC PHY Driver"
 	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
index a5041efb5b8f..7eab129230d1 100644
--- a/drivers/phy/rockchip/Makefile
+++ b/drivers/phy/rockchip/Makefile
@@ -8,5 +8,6 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
 obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
+obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
 obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
new file mode 100644
index 000000000000..e2be53492618
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip PCIE3.0 phy driver
+ *
+ * Copyright (C) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/pcie.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* Register for RK3568 */
+#define GRF_PCIE30PHY_CON1			0x4
+#define GRF_PCIE30PHY_CON6			0x18
+#define GRF_PCIE30PHY_CON9			0x24
+#define GRF_PCIE30PHY_STATUS0			0x80
+#define SRAM_INIT_DONE(reg)			(reg & BIT(14))
+
+#define RK3568_BIFURCATION_LANE_0_1		BIT(0)
+
+/* Register for RK3588 */
+#define PHP_GRF_PCIESEL_CON			0x100
+#define RK3588_PCIE3PHY_GRF_CMN_CON0		0x0
+#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1	0x904
+#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1	0xa04
+#define RK3588_SRAM_INIT_DONE(reg)		(reg & BIT(0))
+
+#define RK3588_BIFURCATION_LANE_0_1		BIT(0)
+#define RK3588_BIFURCATION_LANE_2_3		BIT(1)
+#define RK3588_LANE_AGGREGATION		BIT(2)
+
+struct rockchip_p3phy_ops;
+
+struct rockchip_p3phy_priv {
+	const struct rockchip_p3phy_ops *ops;
+	void __iomem *mmio;
+	/* mode: RC, EP */
+	int mode;
+	/* pcie30_phymode: Aggregation, Bifurcation */
+	int pcie30_phymode;
+	struct regmap *phy_grf;
+	struct regmap *pipe_grf;
+	struct reset_control *p30phy;
+	struct phy *phy;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	int num_lanes;
+	u32 lanes[4];
+};
+
+struct rockchip_p3phy_ops {
+	int (*phy_init)(struct rockchip_p3phy_priv *priv);
+};
+
+static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+	/* Actually We don't care EP/RC mode, but just record it */
+	switch (submode) {
+	case PHY_MODE_PCIE_RC:
+		priv->mode = PHY_MODE_PCIE_RC;
+		break;
+	case PHY_MODE_PCIE_EP:
+		priv->mode = PHY_MODE_PCIE_EP;
+		break;
+	default:
+		dev_err(&phy->dev, "%s, invalid mode\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
+{
+	struct phy *phy = priv->phy;
+	bool bifurcation = false;
+	int ret;
+	u32 reg;
+
+	/* Deassert PCIe PMA output clamp mode */
+	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));
+
+	for (int i = 0; i < priv->num_lanes; i++) {
+		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
+		if (priv->lanes[i] > 1)
+			bifurcation = true;
+	}
+
+	/* Set bifurcation if needed, and it doesn't care RC/EP */
+	if (bifurcation) {
+		dev_info(&phy->dev, "bifurcation enabled\n");
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
+			     BIT(15) | BIT(31));
+	} else {
+		dev_info(&phy->dev, "bifurcation disabled\n");
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+			     (0xf << 16) & ~RK3568_BIFURCATION_LANE_0_1);
+	}
+
+	reset_control_deassert(priv->p30phy);
+
+	ret = regmap_read_poll_timeout(priv->phy_grf,
+				       GRF_PCIE30PHY_STATUS0,
+				       reg, SRAM_INIT_DONE(reg),
+				       0, 500);
+	if (ret)
+		dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
+		       __func__, reg);
+	return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3568_ops = {
+	.phy_init = rockchip_p3phy_rk3568_init,
+};
+
+static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
+{
+	u32 reg = 0;
+	u8 mode = 0;
+	int ret;
+
+	/* Deassert PCIe PMA output clamp mode */
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
+
+	/* Set bifurcation if needed */
+	for (int i = 0; i < priv->num_lanes; i++) {
+		if (!priv->lanes[i])
+			mode |= (BIT(i) << 3);
+
+		if (priv->lanes[i] > 1)
+			mode |= (BIT(i) >> 1);
+	}
+
+	if (!mode)
+		reg = RK3588_LANE_AGGREGATION;
+	else {
+		if (mode & (BIT(0) | BIT(1)))
+			reg |= RK3588_BIFURCATION_LANE_0_1;
+
+		if (mode & (BIT(2) | BIT(3)))
+			reg |= RK3588_BIFURCATION_LANE_2_3;
+	}
+
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
+
+	/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
+	if (!IS_ERR(priv->pipe_grf)) {
+		reg = (mode & (BIT(6) | BIT(7))) >> 6;
+		if (reg)
+			regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
+				     (reg << 16) | reg);
+	}
+
+	reset_control_deassert(priv->p30phy);
+
+	ret = regmap_read_poll_timeout(priv->phy_grf,
+				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
+				       reg, RK3588_SRAM_INIT_DONE(reg),
+				       0, 500);
+	ret |= regmap_read_poll_timeout(priv->phy_grf,
+					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
+					reg, RK3588_SRAM_INIT_DONE(reg),
+					0, 500);
+	if (ret)
+		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
+		       __func__, reg);
+	return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3588_ops = {
+	.phy_init = rockchip_p3phy_rk3588_init,
+};
+
+static int rochchip_p3phy_init(struct phy *phy)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret) {
+		pr_err("failed to enable PCIe bulk clks %d\n", ret);
+		return ret;
+	}
+
+	reset_control_assert(priv->p30phy);
+	udelay(1);
+
+	if (priv->ops->phy_init) {
+		ret = priv->ops->phy_init(priv);
+		if (ret)
+			clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	}
+
+	return ret;
+}
+
+static int rochchip_p3phy_exit(struct phy *phy)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	reset_control_assert(priv->p30phy);
+	return 0;
+}
+
+static const struct phy_ops rochchip_p3phy_ops = {
+	.init = rochchip_p3phy_init,
+	.exit = rochchip_p3phy_exit,
+	.set_mode = rockchip_p3phy_set_mode,
+	.owner = THIS_MODULE,
+};
+
+static int rockchip_p3phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct rockchip_p3phy_priv *priv;
+	struct device_node *np = dev->of_node;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->mmio)) {
+		ret = PTR_ERR(priv->mmio);
+		return ret;
+	}
+
+	priv->ops = of_device_get_match_data(&pdev->dev);
+	if (!priv->ops) {
+		dev_err(&pdev->dev, "no of match data provided\n");
+		return -EINVAL;
+	}
+
+	priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
+	if (IS_ERR(priv->phy_grf)) {
+		dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
+		return PTR_ERR(priv->phy_grf);
+	}
+
+	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+							 "rockchip,pipe-grf");
+	if (IS_ERR(priv->pipe_grf))
+		dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
+
+	priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
+							     priv->lanes, 2,
+							     ARRAY_SIZE(priv->lanes));
+
+	/* if no data-lanes assume aggregation */
+	if (priv->num_lanes == -EINVAL) {
+		dev_dbg(dev, "no data-lanes property found\n");
+		priv->num_lanes = 1;
+		priv->lanes[0] = 1;
+	} else if (priv->num_lanes < 0) {
+		dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
+		return priv->num_lanes;
+	}
+
+	priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
+	if (IS_ERR(priv->phy)) {
+		dev_err(dev, "failed to create combphy\n");
+		return PTR_ERR(priv->phy);
+	}
+
+	priv->p30phy = devm_reset_control_get_optional_exclusive(dev, "phy");
+	if (IS_ERR(priv->p30phy)) {
+		return dev_err_probe(dev, PTR_ERR(priv->p30phy),
+				     "failed to get phy reset control\n");
+	}
+	if (!priv->p30phy)
+		dev_info(dev, "no phy reset control specified\n");
+
+	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
+	if (priv->num_clks < 1)
+		return -ENODEV;
+
+	dev_set_drvdata(dev, priv);
+	phy_set_drvdata(priv->phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_p3phy_of_match[] = {
+	{ .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
+	{ .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
+
+static struct platform_driver rockchip_p3phy_driver = {
+	.probe	= rockchip_p3phy_probe,
+	.driver = {
+		.name = "rockchip-snps-pcie3-phy",
+		.of_match_table = rockchip_p3phy_of_match,
+	},
+};
+module_platform_driver(rockchip_p3phy_driver);
+MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
new file mode 100644
index 000000000000..93c997f520fe
--- /dev/null
+++ b/include/linux/phy/pcie.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+#ifndef __PHY_PCIE_H
+#define __PHY_PCIE_H
+
+#define PHY_MODE_PCIE_RC 20
+#define PHY_MODE_PCIE_EP 21
+#define PHY_MODE_PCIE_BIFURCATION 22
+
+#endif
-- 
2.34.1

[PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Frank Wunderlich]

From: Shawn Lin <shawn.lin@rock-chips.com>

RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
It use a dedicated PCIe-phy. Add support for this.

Initial support by Shawn Lin, modifications by Peter Geis and Frank
Wunderlich.

Add data-lanes property for splitting pcie-lanes across controllers.

The data-lanes is an array where x=0 means lane is disabled and  x > 0
means controller x is assigned to phy lane.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Suggested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- change u8 lane-map to u32 data-lanes

v3:
- change dt-binding include
- change reset to devm_reset_control_get_optional_exclusive
  exit on error and lower severity of message if unset
- fix from peter: disable reg-write for phy-mode in rockchip_p3phy_probe
- move bifurcation/lane-map support from PCIe to phy driver

v2:
- move dt-bindings header into separate patch
- use BIT-macro
- make constants better readable
- use dev_err instead of pr_*
- change dt-binding include due to renaming (phy-snps-pcie3.h => phy-rockchip-pcie3.h)
- use exclusive variant of devm_reset_control_get{,_exclusive}
- fix semicolon.cocci warnings reported by kernel test robot <lkp@intel.com>

---
driver was taken from linux 5.10 based on in
https://github.com/JeffyCN/mirrors
which now has disappeared

Update phy-rockchip-snps-pcie3.c

Fix messages for data-lanes

Update phy-rockchip-snps-pcie3.c

Fix comment for data-lanes
---
 drivers/phy/rockchip/Kconfig                  |   9 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
 include/linux/phy/pcie.h                      |  12 +
 4 files changed, 339 insertions(+)
 create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
 create mode 100644 include/linux/phy/pcie.h

diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index 9022e395c056..94360fc96a6f 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -83,6 +83,15 @@ config PHY_ROCKCHIP_PCIE
 	help
 	  Enable this to support the Rockchip PCIe PHY.
 
+config PHY_ROCKCHIP_SNPS_PCIE3
+	tristate "Rockchip Snps PCIe3 PHY Driver"
+	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the Rockchip snps PCIe3 PHY.
+
 config PHY_ROCKCHIP_TYPEC
 	tristate "Rockchip TYPEC PHY Driver"
 	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
index a5041efb5b8f..7eab129230d1 100644
--- a/drivers/phy/rockchip/Makefile
+++ b/drivers/phy/rockchip/Makefile
@@ -8,5 +8,6 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
 obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
+obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
 obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
new file mode 100644
index 000000000000..e2be53492618
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip PCIE3.0 phy driver
+ *
+ * Copyright (C) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/pcie.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* Register for RK3568 */
+#define GRF_PCIE30PHY_CON1			0x4
+#define GRF_PCIE30PHY_CON6			0x18
+#define GRF_PCIE30PHY_CON9			0x24
+#define GRF_PCIE30PHY_STATUS0			0x80
+#define SRAM_INIT_DONE(reg)			(reg & BIT(14))
+
+#define RK3568_BIFURCATION_LANE_0_1		BIT(0)
+
+/* Register for RK3588 */
+#define PHP_GRF_PCIESEL_CON			0x100
+#define RK3588_PCIE3PHY_GRF_CMN_CON0		0x0
+#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1	0x904
+#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1	0xa04
+#define RK3588_SRAM_INIT_DONE(reg)		(reg & BIT(0))
+
+#define RK3588_BIFURCATION_LANE_0_1		BIT(0)
+#define RK3588_BIFURCATION_LANE_2_3		BIT(1)
+#define RK3588_LANE_AGGREGATION		BIT(2)
+
+struct rockchip_p3phy_ops;
+
+struct rockchip_p3phy_priv {
+	const struct rockchip_p3phy_ops *ops;
+	void __iomem *mmio;
+	/* mode: RC, EP */
+	int mode;
+	/* pcie30_phymode: Aggregation, Bifurcation */
+	int pcie30_phymode;
+	struct regmap *phy_grf;
+	struct regmap *pipe_grf;
+	struct reset_control *p30phy;
+	struct phy *phy;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	int num_lanes;
+	u32 lanes[4];
+};
+
+struct rockchip_p3phy_ops {
+	int (*phy_init)(struct rockchip_p3phy_priv *priv);
+};
+
+static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+	/* Actually We don't care EP/RC mode, but just record it */
+	switch (submode) {
+	case PHY_MODE_PCIE_RC:
+		priv->mode = PHY_MODE_PCIE_RC;
+		break;
+	case PHY_MODE_PCIE_EP:
+		priv->mode = PHY_MODE_PCIE_EP;
+		break;
+	default:
+		dev_err(&phy->dev, "%s, invalid mode\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
+{
+	struct phy *phy = priv->phy;
+	bool bifurcation = false;
+	int ret;
+	u32 reg;
+
+	/* Deassert PCIe PMA output clamp mode */
+	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));
+
+	for (int i = 0; i < priv->num_lanes; i++) {
+		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
+		if (priv->lanes[i] > 1)
+			bifurcation = true;
+	}
+
+	/* Set bifurcation if needed, and it doesn't care RC/EP */
+	if (bifurcation) {
+		dev_info(&phy->dev, "bifurcation enabled\n");
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
+			     BIT(15) | BIT(31));
+	} else {
+		dev_info(&phy->dev, "bifurcation disabled\n");
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+			     (0xf << 16) & ~RK3568_BIFURCATION_LANE_0_1);
+	}
+
+	reset_control_deassert(priv->p30phy);
+
+	ret = regmap_read_poll_timeout(priv->phy_grf,
+				       GRF_PCIE30PHY_STATUS0,
+				       reg, SRAM_INIT_DONE(reg),
+				       0, 500);
+	if (ret)
+		dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
+		       __func__, reg);
+	return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3568_ops = {
+	.phy_init = rockchip_p3phy_rk3568_init,
+};
+
+static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
+{
+	u32 reg = 0;
+	u8 mode = 0;
+	int ret;
+
+	/* Deassert PCIe PMA output clamp mode */
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
+
+	/* Set bifurcation if needed */
+	for (int i = 0; i < priv->num_lanes; i++) {
+		if (!priv->lanes[i])
+			mode |= (BIT(i) << 3);
+
+		if (priv->lanes[i] > 1)
+			mode |= (BIT(i) >> 1);
+	}
+
+	if (!mode)
+		reg = RK3588_LANE_AGGREGATION;
+	else {
+		if (mode & (BIT(0) | BIT(1)))
+			reg |= RK3588_BIFURCATION_LANE_0_1;
+
+		if (mode & (BIT(2) | BIT(3)))
+			reg |= RK3588_BIFURCATION_LANE_2_3;
+	}
+
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
+
+	/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
+	if (!IS_ERR(priv->pipe_grf)) {
+		reg = (mode & (BIT(6) | BIT(7))) >> 6;
+		if (reg)
+			regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
+				     (reg << 16) | reg);
+	}
+
+	reset_control_deassert(priv->p30phy);
+
+	ret = regmap_read_poll_timeout(priv->phy_grf,
+				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
+				       reg, RK3588_SRAM_INIT_DONE(reg),
+				       0, 500);
+	ret |= regmap_read_poll_timeout(priv->phy_grf,
+					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
+					reg, RK3588_SRAM_INIT_DONE(reg),
+					0, 500);
+	if (ret)
+		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
+		       __func__, reg);
+	return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3588_ops = {
+	.phy_init = rockchip_p3phy_rk3588_init,
+};
+
+static int rochchip_p3phy_init(struct phy *phy)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret) {
+		pr_err("failed to enable PCIe bulk clks %d\n", ret);
+		return ret;
+	}
+
+	reset_control_assert(priv->p30phy);
+	udelay(1);
+
+	if (priv->ops->phy_init) {
+		ret = priv->ops->phy_init(priv);
+		if (ret)
+			clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	}
+
+	return ret;
+}
+
+static int rochchip_p3phy_exit(struct phy *phy)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	reset_control_assert(priv->p30phy);
+	return 0;
+}
+
+static const struct phy_ops rochchip_p3phy_ops = {
+	.init = rochchip_p3phy_init,
+	.exit = rochchip_p3phy_exit,
+	.set_mode = rockchip_p3phy_set_mode,
+	.owner = THIS_MODULE,
+};
+
+static int rockchip_p3phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct rockchip_p3phy_priv *priv;
+	struct device_node *np = dev->of_node;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->mmio)) {
+		ret = PTR_ERR(priv->mmio);
+		return ret;
+	}
+
+	priv->ops = of_device_get_match_data(&pdev->dev);
+	if (!priv->ops) {
+		dev_err(&pdev->dev, "no of match data provided\n");
+		return -EINVAL;
+	}
+
+	priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
+	if (IS_ERR(priv->phy_grf)) {
+		dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
+		return PTR_ERR(priv->phy_grf);
+	}
+
+	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+							 "rockchip,pipe-grf");
+	if (IS_ERR(priv->pipe_grf))
+		dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
+
+	priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
+							     priv->lanes, 2,
+							     ARRAY_SIZE(priv->lanes));
+
+	/* if no data-lanes assume aggregation */
+	if (priv->num_lanes == -EINVAL) {
+		dev_dbg(dev, "no data-lanes property found\n");
+		priv->num_lanes = 1;
+		priv->lanes[0] = 1;
+	} else if (priv->num_lanes < 0) {
+		dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
+		return priv->num_lanes;
+	}
+
+	priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
+	if (IS_ERR(priv->phy)) {
+		dev_err(dev, "failed to create combphy\n");
+		return PTR_ERR(priv->phy);
+	}
+
+	priv->p30phy = devm_reset_control_get_optional_exclusive(dev, "phy");
+	if (IS_ERR(priv->p30phy)) {
+		return dev_err_probe(dev, PTR_ERR(priv->p30phy),
+				     "failed to get phy reset control\n");
+	}
+	if (!priv->p30phy)
+		dev_info(dev, "no phy reset control specified\n");
+
+	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
+	if (priv->num_clks < 1)
+		return -ENODEV;
+
+	dev_set_drvdata(dev, priv);
+	phy_set_drvdata(priv->phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_p3phy_of_match[] = {
+	{ .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
+	{ .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
+
+static struct platform_driver rockchip_p3phy_driver = {
+	.probe	= rockchip_p3phy_probe,
+	.driver = {
+		.name = "rockchip-snps-pcie3-phy",
+		.of_match_table = rockchip_p3phy_of_match,
+	},
+};
+module_platform_driver(rockchip_p3phy_driver);
+MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
new file mode 100644
index 000000000000..93c997f520fe
--- /dev/null
+++ b/include/linux/phy/pcie.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+#ifndef __PHY_PCIE_H
+#define __PHY_PCIE_H
+
+#define PHY_MODE_PCIE_RC 20
+#define PHY_MODE_PCIE_EP 21
+#define PHY_MODE_PCIE_BIFURCATION 22
+
+#endif
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Frank Wunderlich]

From: Shawn Lin <shawn.lin@rock-chips.com>

RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
It use a dedicated PCIe-phy. Add support for this.

Initial support by Shawn Lin, modifications by Peter Geis and Frank
Wunderlich.

Add data-lanes property for splitting pcie-lanes across controllers.

The data-lanes is an array where x=0 means lane is disabled and  x > 0
means controller x is assigned to phy lane.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Suggested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- change u8 lane-map to u32 data-lanes

v3:
- change dt-binding include
- change reset to devm_reset_control_get_optional_exclusive
  exit on error and lower severity of message if unset
- fix from peter: disable reg-write for phy-mode in rockchip_p3phy_probe
- move bifurcation/lane-map support from PCIe to phy driver

v2:
- move dt-bindings header into separate patch
- use BIT-macro
- make constants better readable
- use dev_err instead of pr_*
- change dt-binding include due to renaming (phy-snps-pcie3.h => phy-rockchip-pcie3.h)
- use exclusive variant of devm_reset_control_get{,_exclusive}
- fix semicolon.cocci warnings reported by kernel test robot <lkp@intel.com>

---
driver was taken from linux 5.10 based on in
https://github.com/JeffyCN/mirrors
which now has disappeared

Update phy-rockchip-snps-pcie3.c

Fix messages for data-lanes

Update phy-rockchip-snps-pcie3.c

Fix comment for data-lanes
---
 drivers/phy/rockchip/Kconfig                  |   9 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
 include/linux/phy/pcie.h                      |  12 +
 4 files changed, 339 insertions(+)
 create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
 create mode 100644 include/linux/phy/pcie.h

diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index 9022e395c056..94360fc96a6f 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -83,6 +83,15 @@ config PHY_ROCKCHIP_PCIE
 	help
 	  Enable this to support the Rockchip PCIe PHY.
 
+config PHY_ROCKCHIP_SNPS_PCIE3
+	tristate "Rockchip Snps PCIe3 PHY Driver"
+	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the Rockchip snps PCIe3 PHY.
+
 config PHY_ROCKCHIP_TYPEC
 	tristate "Rockchip TYPEC PHY Driver"
 	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
index a5041efb5b8f..7eab129230d1 100644
--- a/drivers/phy/rockchip/Makefile
+++ b/drivers/phy/rockchip/Makefile
@@ -8,5 +8,6 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
 obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
+obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
 obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
new file mode 100644
index 000000000000..e2be53492618
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip PCIE3.0 phy driver
+ *
+ * Copyright (C) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/pcie.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* Register for RK3568 */
+#define GRF_PCIE30PHY_CON1			0x4
+#define GRF_PCIE30PHY_CON6			0x18
+#define GRF_PCIE30PHY_CON9			0x24
+#define GRF_PCIE30PHY_STATUS0			0x80
+#define SRAM_INIT_DONE(reg)			(reg & BIT(14))
+
+#define RK3568_BIFURCATION_LANE_0_1		BIT(0)
+
+/* Register for RK3588 */
+#define PHP_GRF_PCIESEL_CON			0x100
+#define RK3588_PCIE3PHY_GRF_CMN_CON0		0x0
+#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1	0x904
+#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1	0xa04
+#define RK3588_SRAM_INIT_DONE(reg)		(reg & BIT(0))
+
+#define RK3588_BIFURCATION_LANE_0_1		BIT(0)
+#define RK3588_BIFURCATION_LANE_2_3		BIT(1)
+#define RK3588_LANE_AGGREGATION		BIT(2)
+
+struct rockchip_p3phy_ops;
+
+struct rockchip_p3phy_priv {
+	const struct rockchip_p3phy_ops *ops;
+	void __iomem *mmio;
+	/* mode: RC, EP */
+	int mode;
+	/* pcie30_phymode: Aggregation, Bifurcation */
+	int pcie30_phymode;
+	struct regmap *phy_grf;
+	struct regmap *pipe_grf;
+	struct reset_control *p30phy;
+	struct phy *phy;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	int num_lanes;
+	u32 lanes[4];
+};
+
+struct rockchip_p3phy_ops {
+	int (*phy_init)(struct rockchip_p3phy_priv *priv);
+};
+
+static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+	/* Actually We don't care EP/RC mode, but just record it */
+	switch (submode) {
+	case PHY_MODE_PCIE_RC:
+		priv->mode = PHY_MODE_PCIE_RC;
+		break;
+	case PHY_MODE_PCIE_EP:
+		priv->mode = PHY_MODE_PCIE_EP;
+		break;
+	default:
+		dev_err(&phy->dev, "%s, invalid mode\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
+{
+	struct phy *phy = priv->phy;
+	bool bifurcation = false;
+	int ret;
+	u32 reg;
+
+	/* Deassert PCIe PMA output clamp mode */
+	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));
+
+	for (int i = 0; i < priv->num_lanes; i++) {
+		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
+		if (priv->lanes[i] > 1)
+			bifurcation = true;
+	}
+
+	/* Set bifurcation if needed, and it doesn't care RC/EP */
+	if (bifurcation) {
+		dev_info(&phy->dev, "bifurcation enabled\n");
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
+			     BIT(15) | BIT(31));
+	} else {
+		dev_info(&phy->dev, "bifurcation disabled\n");
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+			     (0xf << 16) & ~RK3568_BIFURCATION_LANE_0_1);
+	}
+
+	reset_control_deassert(priv->p30phy);
+
+	ret = regmap_read_poll_timeout(priv->phy_grf,
+				       GRF_PCIE30PHY_STATUS0,
+				       reg, SRAM_INIT_DONE(reg),
+				       0, 500);
+	if (ret)
+		dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
+		       __func__, reg);
+	return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3568_ops = {
+	.phy_init = rockchip_p3phy_rk3568_init,
+};
+
+static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
+{
+	u32 reg = 0;
+	u8 mode = 0;
+	int ret;
+
+	/* Deassert PCIe PMA output clamp mode */
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
+
+	/* Set bifurcation if needed */
+	for (int i = 0; i < priv->num_lanes; i++) {
+		if (!priv->lanes[i])
+			mode |= (BIT(i) << 3);
+
+		if (priv->lanes[i] > 1)
+			mode |= (BIT(i) >> 1);
+	}
+
+	if (!mode)
+		reg = RK3588_LANE_AGGREGATION;
+	else {
+		if (mode & (BIT(0) | BIT(1)))
+			reg |= RK3588_BIFURCATION_LANE_0_1;
+
+		if (mode & (BIT(2) | BIT(3)))
+			reg |= RK3588_BIFURCATION_LANE_2_3;
+	}
+
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
+
+	/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
+	if (!IS_ERR(priv->pipe_grf)) {
+		reg = (mode & (BIT(6) | BIT(7))) >> 6;
+		if (reg)
+			regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
+				     (reg << 16) | reg);
+	}
+
+	reset_control_deassert(priv->p30phy);
+
+	ret = regmap_read_poll_timeout(priv->phy_grf,
+				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
+				       reg, RK3588_SRAM_INIT_DONE(reg),
+				       0, 500);
+	ret |= regmap_read_poll_timeout(priv->phy_grf,
+					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
+					reg, RK3588_SRAM_INIT_DONE(reg),
+					0, 500);
+	if (ret)
+		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
+		       __func__, reg);
+	return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3588_ops = {
+	.phy_init = rockchip_p3phy_rk3588_init,
+};
+
+static int rochchip_p3phy_init(struct phy *phy)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret) {
+		pr_err("failed to enable PCIe bulk clks %d\n", ret);
+		return ret;
+	}
+
+	reset_control_assert(priv->p30phy);
+	udelay(1);
+
+	if (priv->ops->phy_init) {
+		ret = priv->ops->phy_init(priv);
+		if (ret)
+			clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	}
+
+	return ret;
+}
+
+static int rochchip_p3phy_exit(struct phy *phy)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	reset_control_assert(priv->p30phy);
+	return 0;
+}
+
+static const struct phy_ops rochchip_p3phy_ops = {
+	.init = rochchip_p3phy_init,
+	.exit = rochchip_p3phy_exit,
+	.set_mode = rockchip_p3phy_set_mode,
+	.owner = THIS_MODULE,
+};
+
+static int rockchip_p3phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct rockchip_p3phy_priv *priv;
+	struct device_node *np = dev->of_node;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->mmio)) {
+		ret = PTR_ERR(priv->mmio);
+		return ret;
+	}
+
+	priv->ops = of_device_get_match_data(&pdev->dev);
+	if (!priv->ops) {
+		dev_err(&pdev->dev, "no of match data provided\n");
+		return -EINVAL;
+	}
+
+	priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
+	if (IS_ERR(priv->phy_grf)) {
+		dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
+		return PTR_ERR(priv->phy_grf);
+	}
+
+	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+							 "rockchip,pipe-grf");
+	if (IS_ERR(priv->pipe_grf))
+		dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
+
+	priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
+							     priv->lanes, 2,
+							     ARRAY_SIZE(priv->lanes));
+
+	/* if no data-lanes assume aggregation */
+	if (priv->num_lanes == -EINVAL) {
+		dev_dbg(dev, "no data-lanes property found\n");
+		priv->num_lanes = 1;
+		priv->lanes[0] = 1;
+	} else if (priv->num_lanes < 0) {
+		dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
+		return priv->num_lanes;
+	}
+
+	priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
+	if (IS_ERR(priv->phy)) {
+		dev_err(dev, "failed to create combphy\n");
+		return PTR_ERR(priv->phy);
+	}
+
+	priv->p30phy = devm_reset_control_get_optional_exclusive(dev, "phy");
+	if (IS_ERR(priv->p30phy)) {
+		return dev_err_probe(dev, PTR_ERR(priv->p30phy),
+				     "failed to get phy reset control\n");
+	}
+	if (!priv->p30phy)
+		dev_info(dev, "no phy reset control specified\n");
+
+	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
+	if (priv->num_clks < 1)
+		return -ENODEV;
+
+	dev_set_drvdata(dev, priv);
+	phy_set_drvdata(priv->phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_p3phy_of_match[] = {
+	{ .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
+	{ .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
+
+static struct platform_driver rockchip_p3phy_driver = {
+	.probe	= rockchip_p3phy_probe,
+	.driver = {
+		.name = "rockchip-snps-pcie3-phy",
+		.of_match_table = rockchip_p3phy_of_match,
+	},
+};
+module_platform_driver(rockchip_p3phy_driver);
+MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
new file mode 100644
index 000000000000..93c997f520fe
--- /dev/null
+++ b/include/linux/phy/pcie.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+#ifndef __PHY_PCIE_H
+#define __PHY_PCIE_H
+
+#define PHY_MODE_PCIE_RC 20
+#define PHY_MODE_PCIE_EP 21
+#define PHY_MODE_PCIE_BIFURCATION 22
+
+#endif
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Frank Wunderlich]

From: Shawn Lin <shawn.lin@rock-chips.com>

RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
It use a dedicated PCIe-phy. Add support for this.

Initial support by Shawn Lin, modifications by Peter Geis and Frank
Wunderlich.

Add data-lanes property for splitting pcie-lanes across controllers.

The data-lanes is an array where x=0 means lane is disabled and  x > 0
means controller x is assigned to phy lane.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Suggested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- change u8 lane-map to u32 data-lanes

v3:
- change dt-binding include
- change reset to devm_reset_control_get_optional_exclusive
  exit on error and lower severity of message if unset
- fix from peter: disable reg-write for phy-mode in rockchip_p3phy_probe
- move bifurcation/lane-map support from PCIe to phy driver

v2:
- move dt-bindings header into separate patch
- use BIT-macro
- make constants better readable
- use dev_err instead of pr_*
- change dt-binding include due to renaming (phy-snps-pcie3.h => phy-rockchip-pcie3.h)
- use exclusive variant of devm_reset_control_get{,_exclusive}
- fix semicolon.cocci warnings reported by kernel test robot <lkp@intel.com>

---
driver was taken from linux 5.10 based on in
https://github.com/JeffyCN/mirrors
which now has disappeared

Update phy-rockchip-snps-pcie3.c

Fix messages for data-lanes

Update phy-rockchip-snps-pcie3.c

Fix comment for data-lanes
---
 drivers/phy/rockchip/Kconfig                  |   9 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
 include/linux/phy/pcie.h                      |  12 +
 4 files changed, 339 insertions(+)
 create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
 create mode 100644 include/linux/phy/pcie.h

diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index 9022e395c056..94360fc96a6f 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -83,6 +83,15 @@ config PHY_ROCKCHIP_PCIE
 	help
 	  Enable this to support the Rockchip PCIe PHY.
 
+config PHY_ROCKCHIP_SNPS_PCIE3
+	tristate "Rockchip Snps PCIe3 PHY Driver"
+	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the Rockchip snps PCIe3 PHY.
+
 config PHY_ROCKCHIP_TYPEC
 	tristate "Rockchip TYPEC PHY Driver"
 	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
index a5041efb5b8f..7eab129230d1 100644
--- a/drivers/phy/rockchip/Makefile
+++ b/drivers/phy/rockchip/Makefile
@@ -8,5 +8,6 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
 obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
+obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
 obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
new file mode 100644
index 000000000000..e2be53492618
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip PCIE3.0 phy driver
+ *
+ * Copyright (C) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/pcie.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* Register for RK3568 */
+#define GRF_PCIE30PHY_CON1			0x4
+#define GRF_PCIE30PHY_CON6			0x18
+#define GRF_PCIE30PHY_CON9			0x24
+#define GRF_PCIE30PHY_STATUS0			0x80
+#define SRAM_INIT_DONE(reg)			(reg & BIT(14))
+
+#define RK3568_BIFURCATION_LANE_0_1		BIT(0)
+
+/* Register for RK3588 */
+#define PHP_GRF_PCIESEL_CON			0x100
+#define RK3588_PCIE3PHY_GRF_CMN_CON0		0x0
+#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1	0x904
+#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1	0xa04
+#define RK3588_SRAM_INIT_DONE(reg)		(reg & BIT(0))
+
+#define RK3588_BIFURCATION_LANE_0_1		BIT(0)
+#define RK3588_BIFURCATION_LANE_2_3		BIT(1)
+#define RK3588_LANE_AGGREGATION		BIT(2)
+
+struct rockchip_p3phy_ops;
+
+struct rockchip_p3phy_priv {
+	const struct rockchip_p3phy_ops *ops;
+	void __iomem *mmio;
+	/* mode: RC, EP */
+	int mode;
+	/* pcie30_phymode: Aggregation, Bifurcation */
+	int pcie30_phymode;
+	struct regmap *phy_grf;
+	struct regmap *pipe_grf;
+	struct reset_control *p30phy;
+	struct phy *phy;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	int num_lanes;
+	u32 lanes[4];
+};
+
+struct rockchip_p3phy_ops {
+	int (*phy_init)(struct rockchip_p3phy_priv *priv);
+};
+
+static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+	/* Actually We don't care EP/RC mode, but just record it */
+	switch (submode) {
+	case PHY_MODE_PCIE_RC:
+		priv->mode = PHY_MODE_PCIE_RC;
+		break;
+	case PHY_MODE_PCIE_EP:
+		priv->mode = PHY_MODE_PCIE_EP;
+		break;
+	default:
+		dev_err(&phy->dev, "%s, invalid mode\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
+{
+	struct phy *phy = priv->phy;
+	bool bifurcation = false;
+	int ret;
+	u32 reg;
+
+	/* Deassert PCIe PMA output clamp mode */
+	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));
+
+	for (int i = 0; i < priv->num_lanes; i++) {
+		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
+		if (priv->lanes[i] > 1)
+			bifurcation = true;
+	}
+
+	/* Set bifurcation if needed, and it doesn't care RC/EP */
+	if (bifurcation) {
+		dev_info(&phy->dev, "bifurcation enabled\n");
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
+			     BIT(15) | BIT(31));
+	} else {
+		dev_info(&phy->dev, "bifurcation disabled\n");
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+			     (0xf << 16) & ~RK3568_BIFURCATION_LANE_0_1);
+	}
+
+	reset_control_deassert(priv->p30phy);
+
+	ret = regmap_read_poll_timeout(priv->phy_grf,
+				       GRF_PCIE30PHY_STATUS0,
+				       reg, SRAM_INIT_DONE(reg),
+				       0, 500);
+	if (ret)
+		dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
+		       __func__, reg);
+	return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3568_ops = {
+	.phy_init = rockchip_p3phy_rk3568_init,
+};
+
+static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
+{
+	u32 reg = 0;
+	u8 mode = 0;
+	int ret;
+
+	/* Deassert PCIe PMA output clamp mode */
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
+
+	/* Set bifurcation if needed */
+	for (int i = 0; i < priv->num_lanes; i++) {
+		if (!priv->lanes[i])
+			mode |= (BIT(i) << 3);
+
+		if (priv->lanes[i] > 1)
+			mode |= (BIT(i) >> 1);
+	}
+
+	if (!mode)
+		reg = RK3588_LANE_AGGREGATION;
+	else {
+		if (mode & (BIT(0) | BIT(1)))
+			reg |= RK3588_BIFURCATION_LANE_0_1;
+
+		if (mode & (BIT(2) | BIT(3)))
+			reg |= RK3588_BIFURCATION_LANE_2_3;
+	}
+
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
+
+	/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
+	if (!IS_ERR(priv->pipe_grf)) {
+		reg = (mode & (BIT(6) | BIT(7))) >> 6;
+		if (reg)
+			regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
+				     (reg << 16) | reg);
+	}
+
+	reset_control_deassert(priv->p30phy);
+
+	ret = regmap_read_poll_timeout(priv->phy_grf,
+				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
+				       reg, RK3588_SRAM_INIT_DONE(reg),
+				       0, 500);
+	ret |= regmap_read_poll_timeout(priv->phy_grf,
+					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
+					reg, RK3588_SRAM_INIT_DONE(reg),
+					0, 500);
+	if (ret)
+		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
+		       __func__, reg);
+	return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3588_ops = {
+	.phy_init = rockchip_p3phy_rk3588_init,
+};
+
+static int rochchip_p3phy_init(struct phy *phy)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret) {
+		pr_err("failed to enable PCIe bulk clks %d\n", ret);
+		return ret;
+	}
+
+	reset_control_assert(priv->p30phy);
+	udelay(1);
+
+	if (priv->ops->phy_init) {
+		ret = priv->ops->phy_init(priv);
+		if (ret)
+			clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	}
+
+	return ret;
+}
+
+static int rochchip_p3phy_exit(struct phy *phy)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	reset_control_assert(priv->p30phy);
+	return 0;
+}
+
+static const struct phy_ops rochchip_p3phy_ops = {
+	.init = rochchip_p3phy_init,
+	.exit = rochchip_p3phy_exit,
+	.set_mode = rockchip_p3phy_set_mode,
+	.owner = THIS_MODULE,
+};
+
+static int rockchip_p3phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct rockchip_p3phy_priv *priv;
+	struct device_node *np = dev->of_node;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->mmio)) {
+		ret = PTR_ERR(priv->mmio);
+		return ret;
+	}
+
+	priv->ops = of_device_get_match_data(&pdev->dev);
+	if (!priv->ops) {
+		dev_err(&pdev->dev, "no of match data provided\n");
+		return -EINVAL;
+	}
+
+	priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
+	if (IS_ERR(priv->phy_grf)) {
+		dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
+		return PTR_ERR(priv->phy_grf);
+	}
+
+	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+							 "rockchip,pipe-grf");
+	if (IS_ERR(priv->pipe_grf))
+		dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
+
+	priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
+							     priv->lanes, 2,
+							     ARRAY_SIZE(priv->lanes));
+
+	/* if no data-lanes assume aggregation */
+	if (priv->num_lanes == -EINVAL) {
+		dev_dbg(dev, "no data-lanes property found\n");
+		priv->num_lanes = 1;
+		priv->lanes[0] = 1;
+	} else if (priv->num_lanes < 0) {
+		dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
+		return priv->num_lanes;
+	}
+
+	priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
+	if (IS_ERR(priv->phy)) {
+		dev_err(dev, "failed to create combphy\n");
+		return PTR_ERR(priv->phy);
+	}
+
+	priv->p30phy = devm_reset_control_get_optional_exclusive(dev, "phy");
+	if (IS_ERR(priv->p30phy)) {
+		return dev_err_probe(dev, PTR_ERR(priv->p30phy),
+				     "failed to get phy reset control\n");
+	}
+	if (!priv->p30phy)
+		dev_info(dev, "no phy reset control specified\n");
+
+	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
+	if (priv->num_clks < 1)
+		return -ENODEV;
+
+	dev_set_drvdata(dev, priv);
+	phy_set_drvdata(priv->phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_p3phy_of_match[] = {
+	{ .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
+	{ .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
+
+static struct platform_driver rockchip_p3phy_driver = {
+	.probe	= rockchip_p3phy_probe,
+	.driver = {
+		.name = "rockchip-snps-pcie3-phy",
+		.of_match_table = rockchip_p3phy_of_match,
+	},
+};
+module_platform_driver(rockchip_p3phy_driver);
+MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
new file mode 100644
index 000000000000..93c997f520fe
--- /dev/null
+++ b/include/linux/phy/pcie.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+#ifndef __PHY_PCIE_H
+#define __PHY_PCIE_H
+
+#define PHY_MODE_PCIE_RC 20
+#define PHY_MODE_PCIE_EP 21
+#define PHY_MODE_PCIE_BIFURCATION 22
+
+#endif
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 4/5] arm64: dts: rockchip: rk3568: Add PCIe v3 nodes

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add nodes to rk356x devicetree to support PCIe v3.

Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- update pcie3 reg/ranges

v3:
- fix from Peter: change bus-range and msi-map, msi-map needs
  to start from 0x0

v2:
- change to compatible with soc-part
- change rockchip,bifurcation to vendor unspecific bifurcation
---
 arch/arm64/boot/dts/rockchip/rk3568.dtsi | 122 +++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 5eafddf62edc..3f568f6747f6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -42,6 +42,128 @@ qos_sata0: qos@fe190200 {
 		reg = <0x0 0xfe190200 0x0 0x20>;
 	};
 
+	pcie30_phy_grf: syscon@fdcb8000 {
+		compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon";
+		reg = <0x0 0xfdcb8000 0x0 0x10000>;
+	};
+
+	pcie30phy: phy@fe8c0000 {
+		compatible = "rockchip,rk3568-pcie3-phy";
+		reg = <0x0 0xfe8c0000 0x0 0x20000>;
+		#phy-cells = <0>;
+		clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>,
+			 <&cru PCLK_PCIE30PHY>;
+		clock-names = "refclk_m", "refclk_n", "pclk";
+		resets = <&cru SRST_PCIE30PHY>;
+		reset-names = "phy";
+		rockchip,phy-grf = <&pcie30_phy_grf>;
+		status = "disabled";
+	};
+
+	pcie3x1: pcie@fe270000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
+			 <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
+			 <&cru CLK_PCIE30X1_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x1_intc 0>,
+				<0 0 0 2 &pcie3x1_intc 1>,
+				<0 0 0 3 &pcie3x1_intc 2>,
+				<0 0 0 4 &pcie3x1_intc 3>;
+		linux,pci-domain = <1>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x1000 0x1000>;
+		num-lanes = <1>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0400000 0x0 0x00400000>,
+		      <0x0 0xfe270000 0x0 0x00010000>,
+		      <0x3 0x7f000000 0x0 0x01000000>;
+		ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>,
+			 <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X1_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane1 when using 1+1 */
+		status = "disabled";
+
+		pcie3x1_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pcie3x2: pcie@fe280000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
+			 <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
+			 <&cru CLK_PCIE30X2_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
+				<0 0 0 2 &pcie3x2_intc 1>,
+				<0 0 0 3 &pcie3x2_intc 2>,
+				<0 0 0 4 &pcie3x2_intc 3>;
+		linux,pci-domain = <2>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x2000 0x1000>;
+		num-lanes = <2>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0800000 0x0 0x00400000>,
+		      <0x0 0xfe280000 0x0 0x00010000>,
+		      <0x3 0xbf000000 0x0 0x01000000>;
+		ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>,
+			 <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X2_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane0 when using 1+1 */
+		status = "disabled";
+
+		pcie3x2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
 	gmac0: ethernet@fe2a0000 {
 		compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe2a0000 0x0 0x10000>;
-- 
2.34.1

[PATCH v4 4/5] arm64: dts: rockchip: rk3568: Add PCIe v3 nodes

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add nodes to rk356x devicetree to support PCIe v3.

Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- update pcie3 reg/ranges

v3:
- fix from Peter: change bus-range and msi-map, msi-map needs
  to start from 0x0

v2:
- change to compatible with soc-part
- change rockchip,bifurcation to vendor unspecific bifurcation
---
 arch/arm64/boot/dts/rockchip/rk3568.dtsi | 122 +++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 5eafddf62edc..3f568f6747f6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -42,6 +42,128 @@ qos_sata0: qos@fe190200 {
 		reg = <0x0 0xfe190200 0x0 0x20>;
 	};
 
+	pcie30_phy_grf: syscon@fdcb8000 {
+		compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon";
+		reg = <0x0 0xfdcb8000 0x0 0x10000>;
+	};
+
+	pcie30phy: phy@fe8c0000 {
+		compatible = "rockchip,rk3568-pcie3-phy";
+		reg = <0x0 0xfe8c0000 0x0 0x20000>;
+		#phy-cells = <0>;
+		clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>,
+			 <&cru PCLK_PCIE30PHY>;
+		clock-names = "refclk_m", "refclk_n", "pclk";
+		resets = <&cru SRST_PCIE30PHY>;
+		reset-names = "phy";
+		rockchip,phy-grf = <&pcie30_phy_grf>;
+		status = "disabled";
+	};
+
+	pcie3x1: pcie@fe270000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
+			 <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
+			 <&cru CLK_PCIE30X1_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x1_intc 0>,
+				<0 0 0 2 &pcie3x1_intc 1>,
+				<0 0 0 3 &pcie3x1_intc 2>,
+				<0 0 0 4 &pcie3x1_intc 3>;
+		linux,pci-domain = <1>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x1000 0x1000>;
+		num-lanes = <1>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0400000 0x0 0x00400000>,
+		      <0x0 0xfe270000 0x0 0x00010000>,
+		      <0x3 0x7f000000 0x0 0x01000000>;
+		ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>,
+			 <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X1_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane1 when using 1+1 */
+		status = "disabled";
+
+		pcie3x1_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pcie3x2: pcie@fe280000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
+			 <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
+			 <&cru CLK_PCIE30X2_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
+				<0 0 0 2 &pcie3x2_intc 1>,
+				<0 0 0 3 &pcie3x2_intc 2>,
+				<0 0 0 4 &pcie3x2_intc 3>;
+		linux,pci-domain = <2>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x2000 0x1000>;
+		num-lanes = <2>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0800000 0x0 0x00400000>,
+		      <0x0 0xfe280000 0x0 0x00010000>,
+		      <0x3 0xbf000000 0x0 0x01000000>;
+		ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>,
+			 <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X2_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane0 when using 1+1 */
+		status = "disabled";
+
+		pcie3x2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
 	gmac0: ethernet@fe2a0000 {
 		compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe2a0000 0x0 0x10000>;
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 4/5] arm64: dts: rockchip: rk3568: Add PCIe v3 nodes

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add nodes to rk356x devicetree to support PCIe v3.

Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- update pcie3 reg/ranges

v3:
- fix from Peter: change bus-range and msi-map, msi-map needs
  to start from 0x0

v2:
- change to compatible with soc-part
- change rockchip,bifurcation to vendor unspecific bifurcation
---
 arch/arm64/boot/dts/rockchip/rk3568.dtsi | 122 +++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 5eafddf62edc..3f568f6747f6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -42,6 +42,128 @@ qos_sata0: qos@fe190200 {
 		reg = <0x0 0xfe190200 0x0 0x20>;
 	};
 
+	pcie30_phy_grf: syscon@fdcb8000 {
+		compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon";
+		reg = <0x0 0xfdcb8000 0x0 0x10000>;
+	};
+
+	pcie30phy: phy@fe8c0000 {
+		compatible = "rockchip,rk3568-pcie3-phy";
+		reg = <0x0 0xfe8c0000 0x0 0x20000>;
+		#phy-cells = <0>;
+		clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>,
+			 <&cru PCLK_PCIE30PHY>;
+		clock-names = "refclk_m", "refclk_n", "pclk";
+		resets = <&cru SRST_PCIE30PHY>;
+		reset-names = "phy";
+		rockchip,phy-grf = <&pcie30_phy_grf>;
+		status = "disabled";
+	};
+
+	pcie3x1: pcie@fe270000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
+			 <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
+			 <&cru CLK_PCIE30X1_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x1_intc 0>,
+				<0 0 0 2 &pcie3x1_intc 1>,
+				<0 0 0 3 &pcie3x1_intc 2>,
+				<0 0 0 4 &pcie3x1_intc 3>;
+		linux,pci-domain = <1>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x1000 0x1000>;
+		num-lanes = <1>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0400000 0x0 0x00400000>,
+		      <0x0 0xfe270000 0x0 0x00010000>,
+		      <0x3 0x7f000000 0x0 0x01000000>;
+		ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>,
+			 <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X1_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane1 when using 1+1 */
+		status = "disabled";
+
+		pcie3x1_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pcie3x2: pcie@fe280000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
+			 <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
+			 <&cru CLK_PCIE30X2_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
+				<0 0 0 2 &pcie3x2_intc 1>,
+				<0 0 0 3 &pcie3x2_intc 2>,
+				<0 0 0 4 &pcie3x2_intc 3>;
+		linux,pci-domain = <2>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x2000 0x1000>;
+		num-lanes = <2>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0800000 0x0 0x00400000>,
+		      <0x0 0xfe280000 0x0 0x00010000>,
+		      <0x3 0xbf000000 0x0 0x01000000>;
+		ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>,
+			 <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X2_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane0 when using 1+1 */
+		status = "disabled";
+
+		pcie3x2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
 	gmac0: ethernet@fe2a0000 {
 		compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe2a0000 0x0 0x10000>;
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v4 4/5] arm64: dts: rockchip: rk3568: Add PCIe v3 nodes

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add nodes to rk356x devicetree to support PCIe v3.

Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- update pcie3 reg/ranges

v3:
- fix from Peter: change bus-range and msi-map, msi-map needs
  to start from 0x0

v2:
- change to compatible with soc-part
- change rockchip,bifurcation to vendor unspecific bifurcation
---
 arch/arm64/boot/dts/rockchip/rk3568.dtsi | 122 +++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 5eafddf62edc..3f568f6747f6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -42,6 +42,128 @@ qos_sata0: qos@fe190200 {
 		reg = <0x0 0xfe190200 0x0 0x20>;
 	};
 
+	pcie30_phy_grf: syscon@fdcb8000 {
+		compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon";
+		reg = <0x0 0xfdcb8000 0x0 0x10000>;
+	};
+
+	pcie30phy: phy@fe8c0000 {
+		compatible = "rockchip,rk3568-pcie3-phy";
+		reg = <0x0 0xfe8c0000 0x0 0x20000>;
+		#phy-cells = <0>;
+		clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>,
+			 <&cru PCLK_PCIE30PHY>;
+		clock-names = "refclk_m", "refclk_n", "pclk";
+		resets = <&cru SRST_PCIE30PHY>;
+		reset-names = "phy";
+		rockchip,phy-grf = <&pcie30_phy_grf>;
+		status = "disabled";
+	};
+
+	pcie3x1: pcie@fe270000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
+			 <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
+			 <&cru CLK_PCIE30X1_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x1_intc 0>,
+				<0 0 0 2 &pcie3x1_intc 1>,
+				<0 0 0 3 &pcie3x1_intc 2>,
+				<0 0 0 4 &pcie3x1_intc 3>;
+		linux,pci-domain = <1>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x1000 0x1000>;
+		num-lanes = <1>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0400000 0x0 0x00400000>,
+		      <0x0 0xfe270000 0x0 0x00010000>,
+		      <0x3 0x7f000000 0x0 0x01000000>;
+		ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>,
+			 <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X1_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane1 when using 1+1 */
+		status = "disabled";
+
+		pcie3x1_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pcie3x2: pcie@fe280000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
+			 <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
+			 <&cru CLK_PCIE30X2_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
+				<0 0 0 2 &pcie3x2_intc 1>,
+				<0 0 0 3 &pcie3x2_intc 2>,
+				<0 0 0 4 &pcie3x2_intc 3>;
+		linux,pci-domain = <2>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x2000 0x1000>;
+		num-lanes = <2>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0800000 0x0 0x00400000>,
+		      <0x0 0xfe280000 0x0 0x00010000>,
+		      <0x3 0xbf000000 0x0 0x01000000>;
+		ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>,
+			 <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X2_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane0 when using 1+1 */
+		status = "disabled";
+
+		pcie3x2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
 	gmac0: ethernet@fe2a0000 {
 		compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe2a0000 0x0 0x10000>;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
set PCIe related regulators to always on.

Suggested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- change u8 lane-map to u32 data-lanes

v3:
- squash lane-map over bifurcation property
- add comment which slot is M2 and which one if mPCIe
- fixes from Peter:
  - drop regulator-always-on/regulator-boot-on from regulators
  - increase startup-delay-us for regulators
  - set phy-mode on PCIe3-phy
  - add num-lanes to PCIe overrides
  - add usb node for to PCIe/m2
  - move lane-map from PCIe controller to PCIe-phy

v2:
- underscores in nodenames
- rockchip,bifurcation to vendor unspecific bifurcation
- fix trailing space
---
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   | 90 +++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 40cf2236c0b6..dd688019ca49 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -74,6 +74,62 @@ vcc5v0_sys: vcc5v0-sys {
 		vin-supply = <&dc_12v>;
 	};
 
+	pcie30_avdd0v9: pcie30-avdd0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator feeds both ports */
+	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_ngff: vcc3v3-ngff-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
 	vcc5v0_usb: vcc5v0_usb {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
@@ -401,6 +457,27 @@ rgmii_phy1: ethernet-phy@0 {
 	};
 };
 
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	/* M.2 slot */
+	num-lanes = <1>;
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_ngff>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	/* mPCIe slot */
+	num-lanes = <1>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	leds {
 		blue_led_pin: blue-led-pin {
@@ -587,3 +664,16 @@ &usb2phy0_otg {
 	phy-supply = <&vcc5v0_usb_otg>;
 	status = "okay";
 };
+
+&usb2phy1 {
+	/* USB for PCIe/M2 */
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
-- 
2.34.1

[PATCH v4 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
set PCIe related regulators to always on.

Suggested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- change u8 lane-map to u32 data-lanes

v3:
- squash lane-map over bifurcation property
- add comment which slot is M2 and which one if mPCIe
- fixes from Peter:
  - drop regulator-always-on/regulator-boot-on from regulators
  - increase startup-delay-us for regulators
  - set phy-mode on PCIe3-phy
  - add num-lanes to PCIe overrides
  - add usb node for to PCIe/m2
  - move lane-map from PCIe controller to PCIe-phy

v2:
- underscores in nodenames
- rockchip,bifurcation to vendor unspecific bifurcation
- fix trailing space
---
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   | 90 +++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 40cf2236c0b6..dd688019ca49 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -74,6 +74,62 @@ vcc5v0_sys: vcc5v0-sys {
 		vin-supply = <&dc_12v>;
 	};
 
+	pcie30_avdd0v9: pcie30-avdd0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator feeds both ports */
+	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_ngff: vcc3v3-ngff-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
 	vcc5v0_usb: vcc5v0_usb {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
@@ -401,6 +457,27 @@ rgmii_phy1: ethernet-phy@0 {
 	};
 };
 
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	/* M.2 slot */
+	num-lanes = <1>;
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_ngff>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	/* mPCIe slot */
+	num-lanes = <1>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	leds {
 		blue_led_pin: blue-led-pin {
@@ -587,3 +664,16 @@ &usb2phy0_otg {
 	phy-supply = <&vcc5v0_usb_otg>;
 	status = "okay";
 };
+
+&usb2phy1 {
+	/* USB for PCIe/M2 */
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v4 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
set PCIe related regulators to always on.

Suggested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- change u8 lane-map to u32 data-lanes

v3:
- squash lane-map over bifurcation property
- add comment which slot is M2 and which one if mPCIe
- fixes from Peter:
  - drop regulator-always-on/regulator-boot-on from regulators
  - increase startup-delay-us for regulators
  - set phy-mode on PCIe3-phy
  - add num-lanes to PCIe overrides
  - add usb node for to PCIe/m2
  - move lane-map from PCIe controller to PCIe-phy

v2:
- underscores in nodenames
- rockchip,bifurcation to vendor unspecific bifurcation
- fix trailing space
---
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   | 90 +++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 40cf2236c0b6..dd688019ca49 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -74,6 +74,62 @@ vcc5v0_sys: vcc5v0-sys {
 		vin-supply = <&dc_12v>;
 	};
 
+	pcie30_avdd0v9: pcie30-avdd0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator feeds both ports */
+	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_ngff: vcc3v3-ngff-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
 	vcc5v0_usb: vcc5v0_usb {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
@@ -401,6 +457,27 @@ rgmii_phy1: ethernet-phy@0 {
 	};
 };
 
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	/* M.2 slot */
+	num-lanes = <1>;
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_ngff>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	/* mPCIe slot */
+	num-lanes = <1>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	leds {
 		blue_led_pin: blue-led-pin {
@@ -587,3 +664,16 @@ &usb2phy0_otg {
 	phy-supply = <&vcc5v0_usb_otg>;
 	status = "okay";
 };
+
+&usb2phy1 {
+	/* USB for PCIe/M2 */
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
set PCIe related regulators to always on.

Suggested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- change u8 lane-map to u32 data-lanes

v3:
- squash lane-map over bifurcation property
- add comment which slot is M2 and which one if mPCIe
- fixes from Peter:
  - drop regulator-always-on/regulator-boot-on from regulators
  - increase startup-delay-us for regulators
  - set phy-mode on PCIe3-phy
  - add num-lanes to PCIe overrides
  - add usb node for to PCIe/m2
  - move lane-map from PCIe controller to PCIe-phy

v2:
- underscores in nodenames
- rockchip,bifurcation to vendor unspecific bifurcation
- fix trailing space
---
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   | 90 +++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 40cf2236c0b6..dd688019ca49 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -74,6 +74,62 @@ vcc5v0_sys: vcc5v0-sys {
 		vin-supply = <&dc_12v>;
 	};
 
+	pcie30_avdd0v9: pcie30-avdd0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator feeds both ports */
+	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_ngff: vcc3v3-ngff-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
 	vcc5v0_usb: vcc5v0_usb {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
@@ -401,6 +457,27 @@ rgmii_phy1: ethernet-phy@0 {
 	};
 };
 
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	/* M.2 slot */
+	num-lanes = <1>;
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_ngff>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	/* mPCIe slot */
+	num-lanes = <1>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	leds {
 		blue_led_pin: blue-led-pin {
@@ -587,3 +664,16 @@ &usb2phy0_otg {
 	phy-supply = <&vcc5v0_usb_otg>;
 	status = "okay";
 };
+
+&usb2phy1 {
+	/* USB for PCIe/M2 */
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Aw: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Frank Wunderlich]

Hi,

just a gentle ping :)

regards Frank


> Gesendet: Sonntag, 19. Juni 2022 um 10:26 Uhr
> Von: "Frank Wunderlich" <linux@fw-web.de>
> From: Shawn Lin <shawn.lin@rock-chips.com>
>
> RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
> It use a dedicated PCIe-phy. Add support for this.
>
> Initial support by Shawn Lin, modifications by Peter Geis and Frank
> Wunderlich.
>
> Add data-lanes property for splitting pcie-lanes across controllers.
>
> The data-lanes is an array where x=0 means lane is disabled and  x > 0
> means controller x is assigned to phy lane.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> Suggested-by: Peter Geis <pgwipeout@gmail.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>

Aw: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Frank Wunderlich]

Hi,

just a gentle ping :)

regards Frank


> Gesendet: Sonntag, 19. Juni 2022 um 10:26 Uhr
> Von: "Frank Wunderlich" <linux@fw-web.de>
> From: Shawn Lin <shawn.lin@rock-chips.com>
>
> RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
> It use a dedicated PCIe-phy. Add support for this.
>
> Initial support by Shawn Lin, modifications by Peter Geis and Frank
> Wunderlich.
>
> Add data-lanes property for splitting pcie-lanes across controllers.
>
> The data-lanes is an array where x=0 means lane is disabled and  x > 0
> means controller x is assigned to phy lane.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> Suggested-by: Peter Geis <pgwipeout@gmail.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Aw: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Frank Wunderlich]

Hi,

just a gentle ping :)

regards Frank


> Gesendet: Sonntag, 19. Juni 2022 um 10:26 Uhr
> Von: "Frank Wunderlich" <linux@fw-web.de>
> From: Shawn Lin <shawn.lin@rock-chips.com>
>
> RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
> It use a dedicated PCIe-phy. Add support for this.
>
> Initial support by Shawn Lin, modifications by Peter Geis and Frank
> Wunderlich.
>
> Add data-lanes property for splitting pcie-lanes across controllers.
>
> The data-lanes is an array where x=0 means lane is disabled and  x > 0
> means controller x is assigned to phy lane.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> Suggested-by: Peter Geis <pgwipeout@gmail.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Aw: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Frank Wunderlich]

Hi,

just a gentle ping :)

regards Frank


> Gesendet: Sonntag, 19. Juni 2022 um 10:26 Uhr
> Von: "Frank Wunderlich" <linux@fw-web.de>
> From: Shawn Lin <shawn.lin@rock-chips.com>
>
> RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
> It use a dedicated PCIe-phy. Add support for this.
>
> Initial support by Shawn Lin, modifications by Peter Geis and Frank
> Wunderlich.
>
> Add data-lanes property for splitting pcie-lanes across controllers.
>
> The data-lanes is an array where x=0 means lane is disabled and  x > 0
> means controller x is assigned to phy lane.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> Suggested-by: Peter Geis <pgwipeout@gmail.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Vinod Koul]

On 19-06-22, 10:26, Frank Wunderlich wrote:
> From: Shawn Lin <shawn.lin@rock-chips.com>
> 
> RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
> It use a dedicated PCIe-phy. Add support for this.
> 
> Initial support by Shawn Lin, modifications by Peter Geis and Frank
> Wunderlich.
> 
> Add data-lanes property for splitting pcie-lanes across controllers.
> 
> The data-lanes is an array where x=0 means lane is disabled and  x > 0
> means controller x is assigned to phy lane.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> Suggested-by: Peter Geis <pgwipeout@gmail.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> v4:
> - change u8 lane-map to u32 data-lanes
> 
> v3:
> - change dt-binding include
> - change reset to devm_reset_control_get_optional_exclusive
>   exit on error and lower severity of message if unset
> - fix from peter: disable reg-write for phy-mode in rockchip_p3phy_probe
> - move bifurcation/lane-map support from PCIe to phy driver
> 
> v2:
> - move dt-bindings header into separate patch
> - use BIT-macro
> - make constants better readable
> - use dev_err instead of pr_*
> - change dt-binding include due to renaming (phy-snps-pcie3.h => phy-rockchip-pcie3.h)
> - use exclusive variant of devm_reset_control_get{,_exclusive}
> - fix semicolon.cocci warnings reported by kernel test robot <lkp@intel.com>
> 
> ---
> driver was taken from linux 5.10 based on in
> https://github.com/JeffyCN/mirrors
> which now has disappeared
> 
> Update phy-rockchip-snps-pcie3.c
> 
> Fix messages for data-lanes
> 
> Update phy-rockchip-snps-pcie3.c
> 
> Fix comment for data-lanes
> ---
>  drivers/phy/rockchip/Kconfig                  |   9 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
>  include/linux/phy/pcie.h                      |  12 +
>  4 files changed, 339 insertions(+)
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
>  create mode 100644 include/linux/phy/pcie.h
> 
> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> index 9022e395c056..94360fc96a6f 100644
> --- a/drivers/phy/rockchip/Kconfig
> +++ b/drivers/phy/rockchip/Kconfig
> @@ -83,6 +83,15 @@ config PHY_ROCKCHIP_PCIE
>  	help
>  	  Enable this to support the Rockchip PCIe PHY.
>  
> +config PHY_ROCKCHIP_SNPS_PCIE3
> +	tristate "Rockchip Snps PCIe3 PHY Driver"
> +	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	select GENERIC_PHY
> +	select MFD_SYSCON
> +	help
> +	  Enable this to support the Rockchip snps PCIe3 PHY.
> +
>  config PHY_ROCKCHIP_TYPEC
>  	tristate "Rockchip TYPEC PHY Driver"
>  	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> index a5041efb5b8f..7eab129230d1 100644
> --- a/drivers/phy/rockchip/Makefile
> +++ b/drivers/phy/rockchip/Makefile
> @@ -8,5 +8,6 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
>  obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
>  obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
>  obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
> +obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
>  obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
>  obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
> diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> new file mode 100644
> index 000000000000..e2be53492618
> --- /dev/null
> +++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> @@ -0,0 +1,317 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Rockchip PCIE3.0 phy driver
> + *
> + * Copyright (C) 2020 Rockchip Electronics Co., Ltd.

2022 now :)

> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/phy/pcie.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +
> +/* Register for RK3568 */
> +#define GRF_PCIE30PHY_CON1			0x4
> +#define GRF_PCIE30PHY_CON6			0x18
> +#define GRF_PCIE30PHY_CON9			0x24
> +#define GRF_PCIE30PHY_STATUS0			0x80
> +#define SRAM_INIT_DONE(reg)			(reg & BIT(14))
> +
> +#define RK3568_BIFURCATION_LANE_0_1		BIT(0)
> +
> +/* Register for RK3588 */
> +#define PHP_GRF_PCIESEL_CON			0x100
> +#define RK3588_PCIE3PHY_GRF_CMN_CON0		0x0
> +#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1	0x904
> +#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1	0xa04
> +#define RK3588_SRAM_INIT_DONE(reg)		(reg & BIT(0))
> +
> +#define RK3588_BIFURCATION_LANE_0_1		BIT(0)
> +#define RK3588_BIFURCATION_LANE_2_3		BIT(1)
> +#define RK3588_LANE_AGGREGATION		BIT(2)
> +
> +struct rockchip_p3phy_ops;
> +
> +struct rockchip_p3phy_priv {
> +	const struct rockchip_p3phy_ops *ops;
> +	void __iomem *mmio;
> +	/* mode: RC, EP */
> +	int mode;
> +	/* pcie30_phymode: Aggregation, Bifurcation */
> +	int pcie30_phymode;
> +	struct regmap *phy_grf;
> +	struct regmap *pipe_grf;
> +	struct reset_control *p30phy;
> +	struct phy *phy;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
> +	int num_lanes;
> +	u32 lanes[4];
> +};
> +
> +struct rockchip_p3phy_ops {
> +	int (*phy_init)(struct rockchip_p3phy_priv *priv);
> +};
> +
> +static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +
> +	/* Actually We don't care EP/RC mode, but just record it */
> +	switch (submode) {
> +	case PHY_MODE_PCIE_RC:
> +		priv->mode = PHY_MODE_PCIE_RC;
> +		break;
> +	case PHY_MODE_PCIE_EP:
> +		priv->mode = PHY_MODE_PCIE_EP;
> +		break;
> +	default:
> +		dev_err(&phy->dev, "%s, invalid mode\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
> +{
> +	struct phy *phy = priv->phy;
> +	bool bifurcation = false;
> +	int ret;
> +	u32 reg;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));

Can we define these bits..?

> +
> +	for (int i = 0; i < priv->num_lanes; i++) {
> +		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
> +		if (priv->lanes[i] > 1)
> +			bifurcation = true;
> +	}
> +
> +	/* Set bifurcation if needed, and it doesn't care RC/EP */
> +	if (bifurcation) {
> +		dev_info(&phy->dev, "bifurcation enabled\n");
> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);

upper word 0xf?

> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
> +			     BIT(15) | BIT(31));

again define bits please

> +	} else {
> +		dev_info(&phy->dev, "bifurcation disabled\n");

debug level?

> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     (0xf << 16) & ~RK3568_BIFURCATION_LANE_0_1);
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       GRF_PCIE30PHY_STATUS0,
> +				       reg, SRAM_INIT_DONE(reg),
> +				       0, 500);
> +	if (ret)
> +		dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
> +		       __func__, reg);
> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3568_ops = {
> +	.phy_init = rockchip_p3phy_rk3568_init,
> +};
> +
> +static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
> +{
> +	u32 reg = 0;
> +	u8 mode = 0;
> +	int ret;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
> +
> +	/* Set bifurcation if needed */
> +	for (int i = 0; i < priv->num_lanes; i++) {
> +		if (!priv->lanes[i])
> +			mode |= (BIT(i) << 3);
> +
> +		if (priv->lanes[i] > 1)
> +			mode |= (BIT(i) >> 1);
> +	}
> +
> +	if (!mode)
> +		reg = RK3588_LANE_AGGREGATION;
> +	else {
> +		if (mode & (BIT(0) | BIT(1)))
> +			reg |= RK3588_BIFURCATION_LANE_0_1;
> +
> +		if (mode & (BIT(2) | BIT(3)))
> +			reg |= RK3588_BIFURCATION_LANE_2_3;
> +	}
> +
> +	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
> +
> +	/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
> +	if (!IS_ERR(priv->pipe_grf)) {
> +		reg = (mode & (BIT(6) | BIT(7))) >> 6;
> +		if (reg)
> +			regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
> +				     (reg << 16) | reg);
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
> +				       reg, RK3588_SRAM_INIT_DONE(reg),
> +				       0, 500);
> +	ret |= regmap_read_poll_timeout(priv->phy_grf,
> +					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
> +					reg, RK3588_SRAM_INIT_DONE(reg),
> +					0, 500);
> +	if (ret)
> +		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
> +		       __func__, reg);

Can this be made dev_err too, I still see bunch of pr_ and at least here
you have driver context... while at it drop the __func__ from these logs
too please


> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3588_ops = {
> +	.phy_init = rockchip_p3phy_rk3588_init,
> +};
> +
> +static int rochchip_p3phy_init(struct phy *phy)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +	int ret;
> +
> +	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
> +	if (ret) {
> +		pr_err("failed to enable PCIe bulk clks %d\n", ret);
> +		return ret;
> +	}
> +
> +	reset_control_assert(priv->p30phy);
> +	udelay(1);
> +
> +	if (priv->ops->phy_init) {
> +		ret = priv->ops->phy_init(priv);
> +		if (ret)
> +			clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	}
> +
> +	return ret;
> +}
> +
> +static int rochchip_p3phy_exit(struct phy *phy)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +
> +	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	reset_control_assert(priv->p30phy);
> +	return 0;
> +}
> +
> +static const struct phy_ops rochchip_p3phy_ops = {
> +	.init = rochchip_p3phy_init,
> +	.exit = rochchip_p3phy_exit,
> +	.set_mode = rockchip_p3phy_set_mode,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int rockchip_p3phy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct rockchip_p3phy_priv *priv;
> +	struct device_node *np = dev->of_node;
> +	struct resource *res;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->mmio = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(priv->mmio)) {
> +		ret = PTR_ERR(priv->mmio);
> +		return ret;
> +	}
> +
> +	priv->ops = of_device_get_match_data(&pdev->dev);
> +	if (!priv->ops) {
> +		dev_err(&pdev->dev, "no of match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
> +	if (IS_ERR(priv->phy_grf)) {
> +		dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
> +		return PTR_ERR(priv->phy_grf);
> +	}
> +
> +	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
> +							 "rockchip,pipe-grf");
> +	if (IS_ERR(priv->pipe_grf))
> +		dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
> +
> +	priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
> +							     priv->lanes, 2,
> +							     ARRAY_SIZE(priv->lanes));
> +
> +	/* if no data-lanes assume aggregation */
> +	if (priv->num_lanes == -EINVAL) {
> +		dev_dbg(dev, "no data-lanes property found\n");
> +		priv->num_lanes = 1;
> +		priv->lanes[0] = 1;
> +	} else if (priv->num_lanes < 0) {
> +		dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
> +		return priv->num_lanes;
> +	}
> +
> +	priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
> +	if (IS_ERR(priv->phy)) {
> +		dev_err(dev, "failed to create combphy\n");
> +		return PTR_ERR(priv->phy);
> +	}
> +
> +	priv->p30phy = devm_reset_control_get_optional_exclusive(dev, "phy");
> +	if (IS_ERR(priv->p30phy)) {
> +		return dev_err_probe(dev, PTR_ERR(priv->p30phy),
> +				     "failed to get phy reset control\n");
> +	}
> +	if (!priv->p30phy)
> +		dev_info(dev, "no phy reset control specified\n");
> +
> +	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
> +	if (priv->num_clks < 1)
> +		return -ENODEV;
> +
> +	dev_set_drvdata(dev, priv);
> +	phy_set_drvdata(priv->phy, priv);
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id rockchip_p3phy_of_match[] = {
> +	{ .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
> +	{ .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
> +
> +static struct platform_driver rockchip_p3phy_driver = {
> +	.probe	= rockchip_p3phy_probe,
> +	.driver = {
> +		.name = "rockchip-snps-pcie3-phy",
> +		.of_match_table = rockchip_p3phy_of_match,
> +	},
> +};
> +module_platform_driver(rockchip_p3phy_driver);
> +MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
> new file mode 100644
> index 000000000000..93c997f520fe
> --- /dev/null
> +++ b/include/linux/phy/pcie.h
> @@ -0,0 +1,12 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.

Header is 2021 !

> + */
> +#ifndef __PHY_PCIE_H
> +#define __PHY_PCIE_H
> +
> +#define PHY_MODE_PCIE_RC 20
> +#define PHY_MODE_PCIE_EP 21
> +#define PHY_MODE_PCIE_BIFURCATION 22
> +
> +#endif
> -- 
> 2.34.1

-- 
~Vinod

Re: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Vinod Koul]

On 19-06-22, 10:26, Frank Wunderlich wrote:
> From: Shawn Lin <shawn.lin@rock-chips.com>
> 
> RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
> It use a dedicated PCIe-phy. Add support for this.
> 
> Initial support by Shawn Lin, modifications by Peter Geis and Frank
> Wunderlich.
> 
> Add data-lanes property for splitting pcie-lanes across controllers.
> 
> The data-lanes is an array where x=0 means lane is disabled and  x > 0
> means controller x is assigned to phy lane.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> Suggested-by: Peter Geis <pgwipeout@gmail.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> v4:
> - change u8 lane-map to u32 data-lanes
> 
> v3:
> - change dt-binding include
> - change reset to devm_reset_control_get_optional_exclusive
>   exit on error and lower severity of message if unset
> - fix from peter: disable reg-write for phy-mode in rockchip_p3phy_probe
> - move bifurcation/lane-map support from PCIe to phy driver
> 
> v2:
> - move dt-bindings header into separate patch
> - use BIT-macro
> - make constants better readable
> - use dev_err instead of pr_*
> - change dt-binding include due to renaming (phy-snps-pcie3.h => phy-rockchip-pcie3.h)
> - use exclusive variant of devm_reset_control_get{,_exclusive}
> - fix semicolon.cocci warnings reported by kernel test robot <lkp@intel.com>
> 
> ---
> driver was taken from linux 5.10 based on in
> https://github.com/JeffyCN/mirrors
> which now has disappeared
> 
> Update phy-rockchip-snps-pcie3.c
> 
> Fix messages for data-lanes
> 
> Update phy-rockchip-snps-pcie3.c
> 
> Fix comment for data-lanes
> ---
>  drivers/phy/rockchip/Kconfig                  |   9 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
>  include/linux/phy/pcie.h                      |  12 +
>  4 files changed, 339 insertions(+)
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
>  create mode 100644 include/linux/phy/pcie.h
> 
> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> index 9022e395c056..94360fc96a6f 100644
> --- a/drivers/phy/rockchip/Kconfig
> +++ b/drivers/phy/rockchip/Kconfig
> @@ -83,6 +83,15 @@ config PHY_ROCKCHIP_PCIE
>  	help
>  	  Enable this to support the Rockchip PCIe PHY.
>  
> +config PHY_ROCKCHIP_SNPS_PCIE3
> +	tristate "Rockchip Snps PCIe3 PHY Driver"
> +	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	select GENERIC_PHY
> +	select MFD_SYSCON
> +	help
> +	  Enable this to support the Rockchip snps PCIe3 PHY.
> +
>  config PHY_ROCKCHIP_TYPEC
>  	tristate "Rockchip TYPEC PHY Driver"
>  	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> index a5041efb5b8f..7eab129230d1 100644
> --- a/drivers/phy/rockchip/Makefile
> +++ b/drivers/phy/rockchip/Makefile
> @@ -8,5 +8,6 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
>  obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
>  obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
>  obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
> +obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
>  obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
>  obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
> diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> new file mode 100644
> index 000000000000..e2be53492618
> --- /dev/null
> +++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> @@ -0,0 +1,317 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Rockchip PCIE3.0 phy driver
> + *
> + * Copyright (C) 2020 Rockchip Electronics Co., Ltd.

2022 now :)

> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/phy/pcie.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +
> +/* Register for RK3568 */
> +#define GRF_PCIE30PHY_CON1			0x4
> +#define GRF_PCIE30PHY_CON6			0x18
> +#define GRF_PCIE30PHY_CON9			0x24
> +#define GRF_PCIE30PHY_STATUS0			0x80
> +#define SRAM_INIT_DONE(reg)			(reg & BIT(14))
> +
> +#define RK3568_BIFURCATION_LANE_0_1		BIT(0)
> +
> +/* Register for RK3588 */
> +#define PHP_GRF_PCIESEL_CON			0x100
> +#define RK3588_PCIE3PHY_GRF_CMN_CON0		0x0
> +#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1	0x904
> +#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1	0xa04
> +#define RK3588_SRAM_INIT_DONE(reg)		(reg & BIT(0))
> +
> +#define RK3588_BIFURCATION_LANE_0_1		BIT(0)
> +#define RK3588_BIFURCATION_LANE_2_3		BIT(1)
> +#define RK3588_LANE_AGGREGATION		BIT(2)
> +
> +struct rockchip_p3phy_ops;
> +
> +struct rockchip_p3phy_priv {
> +	const struct rockchip_p3phy_ops *ops;
> +	void __iomem *mmio;
> +	/* mode: RC, EP */
> +	int mode;
> +	/* pcie30_phymode: Aggregation, Bifurcation */
> +	int pcie30_phymode;
> +	struct regmap *phy_grf;
> +	struct regmap *pipe_grf;
> +	struct reset_control *p30phy;
> +	struct phy *phy;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
> +	int num_lanes;
> +	u32 lanes[4];
> +};
> +
> +struct rockchip_p3phy_ops {
> +	int (*phy_init)(struct rockchip_p3phy_priv *priv);
> +};
> +
> +static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +
> +	/* Actually We don't care EP/RC mode, but just record it */
> +	switch (submode) {
> +	case PHY_MODE_PCIE_RC:
> +		priv->mode = PHY_MODE_PCIE_RC;
> +		break;
> +	case PHY_MODE_PCIE_EP:
> +		priv->mode = PHY_MODE_PCIE_EP;
> +		break;
> +	default:
> +		dev_err(&phy->dev, "%s, invalid mode\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
> +{
> +	struct phy *phy = priv->phy;
> +	bool bifurcation = false;
> +	int ret;
> +	u32 reg;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));

Can we define these bits..?

> +
> +	for (int i = 0; i < priv->num_lanes; i++) {
> +		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
> +		if (priv->lanes[i] > 1)
> +			bifurcation = true;
> +	}
> +
> +	/* Set bifurcation if needed, and it doesn't care RC/EP */
> +	if (bifurcation) {
> +		dev_info(&phy->dev, "bifurcation enabled\n");
> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);

upper word 0xf?

> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
> +			     BIT(15) | BIT(31));

again define bits please

> +	} else {
> +		dev_info(&phy->dev, "bifurcation disabled\n");

debug level?

> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     (0xf << 16) & ~RK3568_BIFURCATION_LANE_0_1);
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       GRF_PCIE30PHY_STATUS0,
> +				       reg, SRAM_INIT_DONE(reg),
> +				       0, 500);
> +	if (ret)
> +		dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
> +		       __func__, reg);
> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3568_ops = {
> +	.phy_init = rockchip_p3phy_rk3568_init,
> +};
> +
> +static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
> +{
> +	u32 reg = 0;
> +	u8 mode = 0;
> +	int ret;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
> +
> +	/* Set bifurcation if needed */
> +	for (int i = 0; i < priv->num_lanes; i++) {
> +		if (!priv->lanes[i])
> +			mode |= (BIT(i) << 3);
> +
> +		if (priv->lanes[i] > 1)
> +			mode |= (BIT(i) >> 1);
> +	}
> +
> +	if (!mode)
> +		reg = RK3588_LANE_AGGREGATION;
> +	else {
> +		if (mode & (BIT(0) | BIT(1)))
> +			reg |= RK3588_BIFURCATION_LANE_0_1;
> +
> +		if (mode & (BIT(2) | BIT(3)))
> +			reg |= RK3588_BIFURCATION_LANE_2_3;
> +	}
> +
> +	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
> +
> +	/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
> +	if (!IS_ERR(priv->pipe_grf)) {
> +		reg = (mode & (BIT(6) | BIT(7))) >> 6;
> +		if (reg)
> +			regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
> +				     (reg << 16) | reg);
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
> +				       reg, RK3588_SRAM_INIT_DONE(reg),
> +				       0, 500);
> +	ret |= regmap_read_poll_timeout(priv->phy_grf,
> +					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
> +					reg, RK3588_SRAM_INIT_DONE(reg),
> +					0, 500);
> +	if (ret)
> +		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
> +		       __func__, reg);

Can this be made dev_err too, I still see bunch of pr_ and at least here
you have driver context... while at it drop the __func__ from these logs
too please


> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3588_ops = {
> +	.phy_init = rockchip_p3phy_rk3588_init,
> +};
> +
> +static int rochchip_p3phy_init(struct phy *phy)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +	int ret;
> +
> +	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
> +	if (ret) {
> +		pr_err("failed to enable PCIe bulk clks %d\n", ret);
> +		return ret;
> +	}
> +
> +	reset_control_assert(priv->p30phy);
> +	udelay(1);
> +
> +	if (priv->ops->phy_init) {
> +		ret = priv->ops->phy_init(priv);
> +		if (ret)
> +			clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	}
> +
> +	return ret;
> +}
> +
> +static int rochchip_p3phy_exit(struct phy *phy)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +
> +	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	reset_control_assert(priv->p30phy);
> +	return 0;
> +}
> +
> +static const struct phy_ops rochchip_p3phy_ops = {
> +	.init = rochchip_p3phy_init,
> +	.exit = rochchip_p3phy_exit,
> +	.set_mode = rockchip_p3phy_set_mode,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int rockchip_p3phy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct rockchip_p3phy_priv *priv;
> +	struct device_node *np = dev->of_node;
> +	struct resource *res;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->mmio = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(priv->mmio)) {
> +		ret = PTR_ERR(priv->mmio);
> +		return ret;
> +	}
> +
> +	priv->ops = of_device_get_match_data(&pdev->dev);
> +	if (!priv->ops) {
> +		dev_err(&pdev->dev, "no of match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
> +	if (IS_ERR(priv->phy_grf)) {
> +		dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
> +		return PTR_ERR(priv->phy_grf);
> +	}
> +
> +	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
> +							 "rockchip,pipe-grf");
> +	if (IS_ERR(priv->pipe_grf))
> +		dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
> +
> +	priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
> +							     priv->lanes, 2,
> +							     ARRAY_SIZE(priv->lanes));
> +
> +	/* if no data-lanes assume aggregation */
> +	if (priv->num_lanes == -EINVAL) {
> +		dev_dbg(dev, "no data-lanes property found\n");
> +		priv->num_lanes = 1;
> +		priv->lanes[0] = 1;
> +	} else if (priv->num_lanes < 0) {
> +		dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
> +		return priv->num_lanes;
> +	}
> +
> +	priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
> +	if (IS_ERR(priv->phy)) {
> +		dev_err(dev, "failed to create combphy\n");
> +		return PTR_ERR(priv->phy);
> +	}
> +
> +	priv->p30phy = devm_reset_control_get_optional_exclusive(dev, "phy");
> +	if (IS_ERR(priv->p30phy)) {
> +		return dev_err_probe(dev, PTR_ERR(priv->p30phy),
> +				     "failed to get phy reset control\n");
> +	}
> +	if (!priv->p30phy)
> +		dev_info(dev, "no phy reset control specified\n");
> +
> +	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
> +	if (priv->num_clks < 1)
> +		return -ENODEV;
> +
> +	dev_set_drvdata(dev, priv);
> +	phy_set_drvdata(priv->phy, priv);
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id rockchip_p3phy_of_match[] = {
> +	{ .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
> +	{ .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
> +
> +static struct platform_driver rockchip_p3phy_driver = {
> +	.probe	= rockchip_p3phy_probe,
> +	.driver = {
> +		.name = "rockchip-snps-pcie3-phy",
> +		.of_match_table = rockchip_p3phy_of_match,
> +	},
> +};
> +module_platform_driver(rockchip_p3phy_driver);
> +MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
> new file mode 100644
> index 000000000000..93c997f520fe
> --- /dev/null
> +++ b/include/linux/phy/pcie.h
> @@ -0,0 +1,12 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.

Header is 2021 !

> + */
> +#ifndef __PHY_PCIE_H
> +#define __PHY_PCIE_H
> +
> +#define PHY_MODE_PCIE_RC 20
> +#define PHY_MODE_PCIE_EP 21
> +#define PHY_MODE_PCIE_BIFURCATION 22
> +
> +#endif
> -- 
> 2.34.1

-- 
~Vinod

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Vinod Koul]

On 19-06-22, 10:26, Frank Wunderlich wrote:
> From: Shawn Lin <shawn.lin@rock-chips.com>
> 
> RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
> It use a dedicated PCIe-phy. Add support for this.
> 
> Initial support by Shawn Lin, modifications by Peter Geis and Frank
> Wunderlich.
> 
> Add data-lanes property for splitting pcie-lanes across controllers.
> 
> The data-lanes is an array where x=0 means lane is disabled and  x > 0
> means controller x is assigned to phy lane.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> Suggested-by: Peter Geis <pgwipeout@gmail.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> v4:
> - change u8 lane-map to u32 data-lanes
> 
> v3:
> - change dt-binding include
> - change reset to devm_reset_control_get_optional_exclusive
>   exit on error and lower severity of message if unset
> - fix from peter: disable reg-write for phy-mode in rockchip_p3phy_probe
> - move bifurcation/lane-map support from PCIe to phy driver
> 
> v2:
> - move dt-bindings header into separate patch
> - use BIT-macro
> - make constants better readable
> - use dev_err instead of pr_*
> - change dt-binding include due to renaming (phy-snps-pcie3.h => phy-rockchip-pcie3.h)
> - use exclusive variant of devm_reset_control_get{,_exclusive}
> - fix semicolon.cocci warnings reported by kernel test robot <lkp@intel.com>
> 
> ---
> driver was taken from linux 5.10 based on in
> https://github.com/JeffyCN/mirrors
> which now has disappeared
> 
> Update phy-rockchip-snps-pcie3.c
> 
> Fix messages for data-lanes
> 
> Update phy-rockchip-snps-pcie3.c
> 
> Fix comment for data-lanes
> ---
>  drivers/phy/rockchip/Kconfig                  |   9 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
>  include/linux/phy/pcie.h                      |  12 +
>  4 files changed, 339 insertions(+)
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
>  create mode 100644 include/linux/phy/pcie.h
> 
> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> index 9022e395c056..94360fc96a6f 100644
> --- a/drivers/phy/rockchip/Kconfig
> +++ b/drivers/phy/rockchip/Kconfig
> @@ -83,6 +83,15 @@ config PHY_ROCKCHIP_PCIE
>  	help
>  	  Enable this to support the Rockchip PCIe PHY.
>  
> +config PHY_ROCKCHIP_SNPS_PCIE3
> +	tristate "Rockchip Snps PCIe3 PHY Driver"
> +	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	select GENERIC_PHY
> +	select MFD_SYSCON
> +	help
> +	  Enable this to support the Rockchip snps PCIe3 PHY.
> +
>  config PHY_ROCKCHIP_TYPEC
>  	tristate "Rockchip TYPEC PHY Driver"
>  	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> index a5041efb5b8f..7eab129230d1 100644
> --- a/drivers/phy/rockchip/Makefile
> +++ b/drivers/phy/rockchip/Makefile
> @@ -8,5 +8,6 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
>  obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
>  obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
>  obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
> +obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
>  obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
>  obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
> diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> new file mode 100644
> index 000000000000..e2be53492618
> --- /dev/null
> +++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> @@ -0,0 +1,317 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Rockchip PCIE3.0 phy driver
> + *
> + * Copyright (C) 2020 Rockchip Electronics Co., Ltd.

2022 now :)

> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/phy/pcie.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +
> +/* Register for RK3568 */
> +#define GRF_PCIE30PHY_CON1			0x4
> +#define GRF_PCIE30PHY_CON6			0x18
> +#define GRF_PCIE30PHY_CON9			0x24
> +#define GRF_PCIE30PHY_STATUS0			0x80
> +#define SRAM_INIT_DONE(reg)			(reg & BIT(14))
> +
> +#define RK3568_BIFURCATION_LANE_0_1		BIT(0)
> +
> +/* Register for RK3588 */
> +#define PHP_GRF_PCIESEL_CON			0x100
> +#define RK3588_PCIE3PHY_GRF_CMN_CON0		0x0
> +#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1	0x904
> +#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1	0xa04
> +#define RK3588_SRAM_INIT_DONE(reg)		(reg & BIT(0))
> +
> +#define RK3588_BIFURCATION_LANE_0_1		BIT(0)
> +#define RK3588_BIFURCATION_LANE_2_3		BIT(1)
> +#define RK3588_LANE_AGGREGATION		BIT(2)
> +
> +struct rockchip_p3phy_ops;
> +
> +struct rockchip_p3phy_priv {
> +	const struct rockchip_p3phy_ops *ops;
> +	void __iomem *mmio;
> +	/* mode: RC, EP */
> +	int mode;
> +	/* pcie30_phymode: Aggregation, Bifurcation */
> +	int pcie30_phymode;
> +	struct regmap *phy_grf;
> +	struct regmap *pipe_grf;
> +	struct reset_control *p30phy;
> +	struct phy *phy;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
> +	int num_lanes;
> +	u32 lanes[4];
> +};
> +
> +struct rockchip_p3phy_ops {
> +	int (*phy_init)(struct rockchip_p3phy_priv *priv);
> +};
> +
> +static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +
> +	/* Actually We don't care EP/RC mode, but just record it */
> +	switch (submode) {
> +	case PHY_MODE_PCIE_RC:
> +		priv->mode = PHY_MODE_PCIE_RC;
> +		break;
> +	case PHY_MODE_PCIE_EP:
> +		priv->mode = PHY_MODE_PCIE_EP;
> +		break;
> +	default:
> +		dev_err(&phy->dev, "%s, invalid mode\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
> +{
> +	struct phy *phy = priv->phy;
> +	bool bifurcation = false;
> +	int ret;
> +	u32 reg;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));

Can we define these bits..?

> +
> +	for (int i = 0; i < priv->num_lanes; i++) {
> +		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
> +		if (priv->lanes[i] > 1)
> +			bifurcation = true;
> +	}
> +
> +	/* Set bifurcation if needed, and it doesn't care RC/EP */
> +	if (bifurcation) {
> +		dev_info(&phy->dev, "bifurcation enabled\n");
> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);

upper word 0xf?

> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
> +			     BIT(15) | BIT(31));

again define bits please

> +	} else {
> +		dev_info(&phy->dev, "bifurcation disabled\n");

debug level?

> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     (0xf << 16) & ~RK3568_BIFURCATION_LANE_0_1);
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       GRF_PCIE30PHY_STATUS0,
> +				       reg, SRAM_INIT_DONE(reg),
> +				       0, 500);
> +	if (ret)
> +		dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
> +		       __func__, reg);
> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3568_ops = {
> +	.phy_init = rockchip_p3phy_rk3568_init,
> +};
> +
> +static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
> +{
> +	u32 reg = 0;
> +	u8 mode = 0;
> +	int ret;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
> +
> +	/* Set bifurcation if needed */
> +	for (int i = 0; i < priv->num_lanes; i++) {
> +		if (!priv->lanes[i])
> +			mode |= (BIT(i) << 3);
> +
> +		if (priv->lanes[i] > 1)
> +			mode |= (BIT(i) >> 1);
> +	}
> +
> +	if (!mode)
> +		reg = RK3588_LANE_AGGREGATION;
> +	else {
> +		if (mode & (BIT(0) | BIT(1)))
> +			reg |= RK3588_BIFURCATION_LANE_0_1;
> +
> +		if (mode & (BIT(2) | BIT(3)))
> +			reg |= RK3588_BIFURCATION_LANE_2_3;
> +	}
> +
> +	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
> +
> +	/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
> +	if (!IS_ERR(priv->pipe_grf)) {
> +		reg = (mode & (BIT(6) | BIT(7))) >> 6;
> +		if (reg)
> +			regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
> +				     (reg << 16) | reg);
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
> +				       reg, RK3588_SRAM_INIT_DONE(reg),
> +				       0, 500);
> +	ret |= regmap_read_poll_timeout(priv->phy_grf,
> +					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
> +					reg, RK3588_SRAM_INIT_DONE(reg),
> +					0, 500);
> +	if (ret)
> +		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
> +		       __func__, reg);

Can this be made dev_err too, I still see bunch of pr_ and at least here
you have driver context... while at it drop the __func__ from these logs
too please


> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3588_ops = {
> +	.phy_init = rockchip_p3phy_rk3588_init,
> +};
> +
> +static int rochchip_p3phy_init(struct phy *phy)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +	int ret;
> +
> +	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
> +	if (ret) {
> +		pr_err("failed to enable PCIe bulk clks %d\n", ret);
> +		return ret;
> +	}
> +
> +	reset_control_assert(priv->p30phy);
> +	udelay(1);
> +
> +	if (priv->ops->phy_init) {
> +		ret = priv->ops->phy_init(priv);
> +		if (ret)
> +			clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	}
> +
> +	return ret;
> +}
> +
> +static int rochchip_p3phy_exit(struct phy *phy)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +
> +	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	reset_control_assert(priv->p30phy);
> +	return 0;
> +}
> +
> +static const struct phy_ops rochchip_p3phy_ops = {
> +	.init = rochchip_p3phy_init,
> +	.exit = rochchip_p3phy_exit,
> +	.set_mode = rockchip_p3phy_set_mode,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int rockchip_p3phy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct rockchip_p3phy_priv *priv;
> +	struct device_node *np = dev->of_node;
> +	struct resource *res;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->mmio = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(priv->mmio)) {
> +		ret = PTR_ERR(priv->mmio);
> +		return ret;
> +	}
> +
> +	priv->ops = of_device_get_match_data(&pdev->dev);
> +	if (!priv->ops) {
> +		dev_err(&pdev->dev, "no of match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
> +	if (IS_ERR(priv->phy_grf)) {
> +		dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
> +		return PTR_ERR(priv->phy_grf);
> +	}
> +
> +	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
> +							 "rockchip,pipe-grf");
> +	if (IS_ERR(priv->pipe_grf))
> +		dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
> +
> +	priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
> +							     priv->lanes, 2,
> +							     ARRAY_SIZE(priv->lanes));
> +
> +	/* if no data-lanes assume aggregation */
> +	if (priv->num_lanes == -EINVAL) {
> +		dev_dbg(dev, "no data-lanes property found\n");
> +		priv->num_lanes = 1;
> +		priv->lanes[0] = 1;
> +	} else if (priv->num_lanes < 0) {
> +		dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
> +		return priv->num_lanes;
> +	}
> +
> +	priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
> +	if (IS_ERR(priv->phy)) {
> +		dev_err(dev, "failed to create combphy\n");
> +		return PTR_ERR(priv->phy);
> +	}
> +
> +	priv->p30phy = devm_reset_control_get_optional_exclusive(dev, "phy");
> +	if (IS_ERR(priv->p30phy)) {
> +		return dev_err_probe(dev, PTR_ERR(priv->p30phy),
> +				     "failed to get phy reset control\n");
> +	}
> +	if (!priv->p30phy)
> +		dev_info(dev, "no phy reset control specified\n");
> +
> +	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
> +	if (priv->num_clks < 1)
> +		return -ENODEV;
> +
> +	dev_set_drvdata(dev, priv);
> +	phy_set_drvdata(priv->phy, priv);
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id rockchip_p3phy_of_match[] = {
> +	{ .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
> +	{ .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
> +
> +static struct platform_driver rockchip_p3phy_driver = {
> +	.probe	= rockchip_p3phy_probe,
> +	.driver = {
> +		.name = "rockchip-snps-pcie3-phy",
> +		.of_match_table = rockchip_p3phy_of_match,
> +	},
> +};
> +module_platform_driver(rockchip_p3phy_driver);
> +MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
> new file mode 100644
> index 000000000000..93c997f520fe
> --- /dev/null
> +++ b/include/linux/phy/pcie.h
> @@ -0,0 +1,12 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.

Header is 2021 !

> + */
> +#ifndef __PHY_PCIE_H
> +#define __PHY_PCIE_H
> +
> +#define PHY_MODE_PCIE_RC 20
> +#define PHY_MODE_PCIE_EP 21
> +#define PHY_MODE_PCIE_BIFURCATION 22
> +
> +#endif
> -- 
> 2.34.1

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Vinod Koul]

On 19-06-22, 10:26, Frank Wunderlich wrote:
> From: Shawn Lin <shawn.lin@rock-chips.com>
> 
> RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
> It use a dedicated PCIe-phy. Add support for this.
> 
> Initial support by Shawn Lin, modifications by Peter Geis and Frank
> Wunderlich.
> 
> Add data-lanes property for splitting pcie-lanes across controllers.
> 
> The data-lanes is an array where x=0 means lane is disabled and  x > 0
> means controller x is assigned to phy lane.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> Suggested-by: Peter Geis <pgwipeout@gmail.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> v4:
> - change u8 lane-map to u32 data-lanes
> 
> v3:
> - change dt-binding include
> - change reset to devm_reset_control_get_optional_exclusive
>   exit on error and lower severity of message if unset
> - fix from peter: disable reg-write for phy-mode in rockchip_p3phy_probe
> - move bifurcation/lane-map support from PCIe to phy driver
> 
> v2:
> - move dt-bindings header into separate patch
> - use BIT-macro
> - make constants better readable
> - use dev_err instead of pr_*
> - change dt-binding include due to renaming (phy-snps-pcie3.h => phy-rockchip-pcie3.h)
> - use exclusive variant of devm_reset_control_get{,_exclusive}
> - fix semicolon.cocci warnings reported by kernel test robot <lkp@intel.com>
> 
> ---
> driver was taken from linux 5.10 based on in
> https://github.com/JeffyCN/mirrors
> which now has disappeared
> 
> Update phy-rockchip-snps-pcie3.c
> 
> Fix messages for data-lanes
> 
> Update phy-rockchip-snps-pcie3.c
> 
> Fix comment for data-lanes
> ---
>  drivers/phy/rockchip/Kconfig                  |   9 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
>  include/linux/phy/pcie.h                      |  12 +
>  4 files changed, 339 insertions(+)
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
>  create mode 100644 include/linux/phy/pcie.h
> 
> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> index 9022e395c056..94360fc96a6f 100644
> --- a/drivers/phy/rockchip/Kconfig
> +++ b/drivers/phy/rockchip/Kconfig
> @@ -83,6 +83,15 @@ config PHY_ROCKCHIP_PCIE
>  	help
>  	  Enable this to support the Rockchip PCIe PHY.
>  
> +config PHY_ROCKCHIP_SNPS_PCIE3
> +	tristate "Rockchip Snps PCIe3 PHY Driver"
> +	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	select GENERIC_PHY
> +	select MFD_SYSCON
> +	help
> +	  Enable this to support the Rockchip snps PCIe3 PHY.
> +
>  config PHY_ROCKCHIP_TYPEC
>  	tristate "Rockchip TYPEC PHY Driver"
>  	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> index a5041efb5b8f..7eab129230d1 100644
> --- a/drivers/phy/rockchip/Makefile
> +++ b/drivers/phy/rockchip/Makefile
> @@ -8,5 +8,6 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
>  obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
>  obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
>  obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
> +obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
>  obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
>  obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
> diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> new file mode 100644
> index 000000000000..e2be53492618
> --- /dev/null
> +++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> @@ -0,0 +1,317 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Rockchip PCIE3.0 phy driver
> + *
> + * Copyright (C) 2020 Rockchip Electronics Co., Ltd.

2022 now :)

> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/phy/pcie.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +
> +/* Register for RK3568 */
> +#define GRF_PCIE30PHY_CON1			0x4
> +#define GRF_PCIE30PHY_CON6			0x18
> +#define GRF_PCIE30PHY_CON9			0x24
> +#define GRF_PCIE30PHY_STATUS0			0x80
> +#define SRAM_INIT_DONE(reg)			(reg & BIT(14))
> +
> +#define RK3568_BIFURCATION_LANE_0_1		BIT(0)
> +
> +/* Register for RK3588 */
> +#define PHP_GRF_PCIESEL_CON			0x100
> +#define RK3588_PCIE3PHY_GRF_CMN_CON0		0x0
> +#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1	0x904
> +#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1	0xa04
> +#define RK3588_SRAM_INIT_DONE(reg)		(reg & BIT(0))
> +
> +#define RK3588_BIFURCATION_LANE_0_1		BIT(0)
> +#define RK3588_BIFURCATION_LANE_2_3		BIT(1)
> +#define RK3588_LANE_AGGREGATION		BIT(2)
> +
> +struct rockchip_p3phy_ops;
> +
> +struct rockchip_p3phy_priv {
> +	const struct rockchip_p3phy_ops *ops;
> +	void __iomem *mmio;
> +	/* mode: RC, EP */
> +	int mode;
> +	/* pcie30_phymode: Aggregation, Bifurcation */
> +	int pcie30_phymode;
> +	struct regmap *phy_grf;
> +	struct regmap *pipe_grf;
> +	struct reset_control *p30phy;
> +	struct phy *phy;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
> +	int num_lanes;
> +	u32 lanes[4];
> +};
> +
> +struct rockchip_p3phy_ops {
> +	int (*phy_init)(struct rockchip_p3phy_priv *priv);
> +};
> +
> +static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +
> +	/* Actually We don't care EP/RC mode, but just record it */
> +	switch (submode) {
> +	case PHY_MODE_PCIE_RC:
> +		priv->mode = PHY_MODE_PCIE_RC;
> +		break;
> +	case PHY_MODE_PCIE_EP:
> +		priv->mode = PHY_MODE_PCIE_EP;
> +		break;
> +	default:
> +		dev_err(&phy->dev, "%s, invalid mode\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
> +{
> +	struct phy *phy = priv->phy;
> +	bool bifurcation = false;
> +	int ret;
> +	u32 reg;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));

Can we define these bits..?

> +
> +	for (int i = 0; i < priv->num_lanes; i++) {
> +		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
> +		if (priv->lanes[i] > 1)
> +			bifurcation = true;
> +	}
> +
> +	/* Set bifurcation if needed, and it doesn't care RC/EP */
> +	if (bifurcation) {
> +		dev_info(&phy->dev, "bifurcation enabled\n");
> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);

upper word 0xf?

> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
> +			     BIT(15) | BIT(31));

again define bits please

> +	} else {
> +		dev_info(&phy->dev, "bifurcation disabled\n");

debug level?

> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     (0xf << 16) & ~RK3568_BIFURCATION_LANE_0_1);
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       GRF_PCIE30PHY_STATUS0,
> +				       reg, SRAM_INIT_DONE(reg),
> +				       0, 500);
> +	if (ret)
> +		dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
> +		       __func__, reg);
> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3568_ops = {
> +	.phy_init = rockchip_p3phy_rk3568_init,
> +};
> +
> +static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
> +{
> +	u32 reg = 0;
> +	u8 mode = 0;
> +	int ret;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
> +
> +	/* Set bifurcation if needed */
> +	for (int i = 0; i < priv->num_lanes; i++) {
> +		if (!priv->lanes[i])
> +			mode |= (BIT(i) << 3);
> +
> +		if (priv->lanes[i] > 1)
> +			mode |= (BIT(i) >> 1);
> +	}
> +
> +	if (!mode)
> +		reg = RK3588_LANE_AGGREGATION;
> +	else {
> +		if (mode & (BIT(0) | BIT(1)))
> +			reg |= RK3588_BIFURCATION_LANE_0_1;
> +
> +		if (mode & (BIT(2) | BIT(3)))
> +			reg |= RK3588_BIFURCATION_LANE_2_3;
> +	}
> +
> +	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
> +
> +	/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
> +	if (!IS_ERR(priv->pipe_grf)) {
> +		reg = (mode & (BIT(6) | BIT(7))) >> 6;
> +		if (reg)
> +			regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
> +				     (reg << 16) | reg);
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
> +				       reg, RK3588_SRAM_INIT_DONE(reg),
> +				       0, 500);
> +	ret |= regmap_read_poll_timeout(priv->phy_grf,
> +					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
> +					reg, RK3588_SRAM_INIT_DONE(reg),
> +					0, 500);
> +	if (ret)
> +		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
> +		       __func__, reg);

Can this be made dev_err too, I still see bunch of pr_ and at least here
you have driver context... while at it drop the __func__ from these logs
too please


> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3588_ops = {
> +	.phy_init = rockchip_p3phy_rk3588_init,
> +};
> +
> +static int rochchip_p3phy_init(struct phy *phy)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +	int ret;
> +
> +	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
> +	if (ret) {
> +		pr_err("failed to enable PCIe bulk clks %d\n", ret);
> +		return ret;
> +	}
> +
> +	reset_control_assert(priv->p30phy);
> +	udelay(1);
> +
> +	if (priv->ops->phy_init) {
> +		ret = priv->ops->phy_init(priv);
> +		if (ret)
> +			clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	}
> +
> +	return ret;
> +}
> +
> +static int rochchip_p3phy_exit(struct phy *phy)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +
> +	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	reset_control_assert(priv->p30phy);
> +	return 0;
> +}
> +
> +static const struct phy_ops rochchip_p3phy_ops = {
> +	.init = rochchip_p3phy_init,
> +	.exit = rochchip_p3phy_exit,
> +	.set_mode = rockchip_p3phy_set_mode,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int rockchip_p3phy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct rockchip_p3phy_priv *priv;
> +	struct device_node *np = dev->of_node;
> +	struct resource *res;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->mmio = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(priv->mmio)) {
> +		ret = PTR_ERR(priv->mmio);
> +		return ret;
> +	}
> +
> +	priv->ops = of_device_get_match_data(&pdev->dev);
> +	if (!priv->ops) {
> +		dev_err(&pdev->dev, "no of match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
> +	if (IS_ERR(priv->phy_grf)) {
> +		dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
> +		return PTR_ERR(priv->phy_grf);
> +	}
> +
> +	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
> +							 "rockchip,pipe-grf");
> +	if (IS_ERR(priv->pipe_grf))
> +		dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
> +
> +	priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
> +							     priv->lanes, 2,
> +							     ARRAY_SIZE(priv->lanes));
> +
> +	/* if no data-lanes assume aggregation */
> +	if (priv->num_lanes == -EINVAL) {
> +		dev_dbg(dev, "no data-lanes property found\n");
> +		priv->num_lanes = 1;
> +		priv->lanes[0] = 1;
> +	} else if (priv->num_lanes < 0) {
> +		dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
> +		return priv->num_lanes;
> +	}
> +
> +	priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
> +	if (IS_ERR(priv->phy)) {
> +		dev_err(dev, "failed to create combphy\n");
> +		return PTR_ERR(priv->phy);
> +	}
> +
> +	priv->p30phy = devm_reset_control_get_optional_exclusive(dev, "phy");
> +	if (IS_ERR(priv->p30phy)) {
> +		return dev_err_probe(dev, PTR_ERR(priv->p30phy),
> +				     "failed to get phy reset control\n");
> +	}
> +	if (!priv->p30phy)
> +		dev_info(dev, "no phy reset control specified\n");
> +
> +	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
> +	if (priv->num_clks < 1)
> +		return -ENODEV;
> +
> +	dev_set_drvdata(dev, priv);
> +	phy_set_drvdata(priv->phy, priv);
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id rockchip_p3phy_of_match[] = {
> +	{ .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
> +	{ .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
> +
> +static struct platform_driver rockchip_p3phy_driver = {
> +	.probe	= rockchip_p3phy_probe,
> +	.driver = {
> +		.name = "rockchip-snps-pcie3-phy",
> +		.of_match_table = rockchip_p3phy_of_match,
> +	},
> +};
> +module_platform_driver(rockchip_p3phy_driver);
> +MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
> new file mode 100644
> index 000000000000..93c997f520fe
> --- /dev/null
> +++ b/include/linux/phy/pcie.h
> @@ -0,0 +1,12 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.

Header is 2021 !

> + */
> +#ifndef __PHY_PCIE_H
> +#define __PHY_PCIE_H
> +
> +#define PHY_MODE_PCIE_RC 20
> +#define PHY_MODE_PCIE_EP 21
> +#define PHY_MODE_PCIE_BIFURCATION 22
> +
> +#endif
> -- 
> 2.34.1

-- 
~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Aw: Re: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Frank Wunderlich]

Hi

thanks for review.

> Gesendet: Freitag, 15. Juli 2022 um 13:46 Uhr
> Von: "Vinod Koul" <vkoul@kernel.org>
> > + * Copyright (C) 2020 Rockchip Electronics Co., Ltd.
>
> 2022 now :)

ok, i change it

> > +	/* Deassert PCIe PMA output clamp mode */
> > +	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));
>
> Can we define these bits..?

i have no naming found for it as these are not described in the TRM

maybe Peter or Liang/Shawn has these?

> > +
> > +	for (int i = 0; i < priv->num_lanes; i++) {
> > +		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
> > +		if (priv->lanes[i] > 1)
> > +			bifurcation = true;
> > +	}
> > +
> > +	/* Set bifurcation if needed, and it doesn't care RC/EP */
> > +	if (bifurcation) {
> > +		dev_info(&phy->dev, "bifurcation enabled\n");
> > +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> > +			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);
>
> upper word 0xf?

afaik yes (write-enable), is there any other more readable way?

> > +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
> > +			     BIT(15) | BIT(31));
>
> again define bits please

these are not documented too

> > +	} else {
> > +		dev_info(&phy->dev, "bifurcation disabled\n");
>
> debug level?

i made them same as the "bifurcation enabled" to have always an info about it in dmesg.

> > +	if (ret)
> > +		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
> > +		       __func__, reg);
>
> Can this be made dev_err too, I still see bunch of pr_ and at least here
> you have driver context... while at it drop the __func__ from these logs
> too please

ok, i'll change it

> > diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
> > new file mode 100644
> > index 000000000000..93c997f520fe
> > --- /dev/null
> > +++ b/include/linux/phy/pcie.h
> > @@ -0,0 +1,12 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
>
> Header is 2021 !

i'll change

> --
> ~Vinod

regards Frank

Aw: Re: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Frank Wunderlich]

Hi

thanks for review.

> Gesendet: Freitag, 15. Juli 2022 um 13:46 Uhr
> Von: "Vinod Koul" <vkoul@kernel.org>
> > + * Copyright (C) 2020 Rockchip Electronics Co., Ltd.
>
> 2022 now :)

ok, i change it

> > +	/* Deassert PCIe PMA output clamp mode */
> > +	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));
>
> Can we define these bits..?

i have no naming found for it as these are not described in the TRM

maybe Peter or Liang/Shawn has these?

> > +
> > +	for (int i = 0; i < priv->num_lanes; i++) {
> > +		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
> > +		if (priv->lanes[i] > 1)
> > +			bifurcation = true;
> > +	}
> > +
> > +	/* Set bifurcation if needed, and it doesn't care RC/EP */
> > +	if (bifurcation) {
> > +		dev_info(&phy->dev, "bifurcation enabled\n");
> > +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> > +			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);
>
> upper word 0xf?

afaik yes (write-enable), is there any other more readable way?

> > +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
> > +			     BIT(15) | BIT(31));
>
> again define bits please

these are not documented too

> > +	} else {
> > +		dev_info(&phy->dev, "bifurcation disabled\n");
>
> debug level?

i made them same as the "bifurcation enabled" to have always an info about it in dmesg.

> > +	if (ret)
> > +		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
> > +		       __func__, reg);
>
> Can this be made dev_err too, I still see bunch of pr_ and at least here
> you have driver context... while at it drop the __func__ from these logs
> too please

ok, i'll change it

> > diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
> > new file mode 100644
> > index 000000000000..93c997f520fe
> > --- /dev/null
> > +++ b/include/linux/phy/pcie.h
> > @@ -0,0 +1,12 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
>
> Header is 2021 !

i'll change

> --
> ~Vinod

regards Frank

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Aw: Re: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Frank Wunderlich]

Hi

thanks for review.

> Gesendet: Freitag, 15. Juli 2022 um 13:46 Uhr
> Von: "Vinod Koul" <vkoul@kernel.org>
> > + * Copyright (C) 2020 Rockchip Electronics Co., Ltd.
>
> 2022 now :)

ok, i change it

> > +	/* Deassert PCIe PMA output clamp mode */
> > +	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));
>
> Can we define these bits..?

i have no naming found for it as these are not described in the TRM

maybe Peter or Liang/Shawn has these?

> > +
> > +	for (int i = 0; i < priv->num_lanes; i++) {
> > +		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
> > +		if (priv->lanes[i] > 1)
> > +			bifurcation = true;
> > +	}
> > +
> > +	/* Set bifurcation if needed, and it doesn't care RC/EP */
> > +	if (bifurcation) {
> > +		dev_info(&phy->dev, "bifurcation enabled\n");
> > +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> > +			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);
>
> upper word 0xf?

afaik yes (write-enable), is there any other more readable way?

> > +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
> > +			     BIT(15) | BIT(31));
>
> again define bits please

these are not documented too

> > +	} else {
> > +		dev_info(&phy->dev, "bifurcation disabled\n");
>
> debug level?

i made them same as the "bifurcation enabled" to have always an info about it in dmesg.

> > +	if (ret)
> > +		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
> > +		       __func__, reg);
>
> Can this be made dev_err too, I still see bunch of pr_ and at least here
> you have driver context... while at it drop the __func__ from these logs
> too please

ok, i'll change it

> > diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
> > new file mode 100644
> > index 000000000000..93c997f520fe
> > --- /dev/null
> > +++ b/include/linux/phy/pcie.h
> > @@ -0,0 +1,12 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
>
> Header is 2021 !

i'll change

> --
> ~Vinod

regards Frank

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Aw: Re: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

[Frank Wunderlich]

Hi

thanks for review.

> Gesendet: Freitag, 15. Juli 2022 um 13:46 Uhr
> Von: "Vinod Koul" <vkoul@kernel.org>
> > + * Copyright (C) 2020 Rockchip Electronics Co., Ltd.
>
> 2022 now :)

ok, i change it

> > +	/* Deassert PCIe PMA output clamp mode */
> > +	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));
>
> Can we define these bits..?

i have no naming found for it as these are not described in the TRM

maybe Peter or Liang/Shawn has these?

> > +
> > +	for (int i = 0; i < priv->num_lanes; i++) {
> > +		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
> > +		if (priv->lanes[i] > 1)
> > +			bifurcation = true;
> > +	}
> > +
> > +	/* Set bifurcation if needed, and it doesn't care RC/EP */
> > +	if (bifurcation) {
> > +		dev_info(&phy->dev, "bifurcation enabled\n");
> > +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> > +			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);
>
> upper word 0xf?

afaik yes (write-enable), is there any other more readable way?

> > +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
> > +			     BIT(15) | BIT(31));
>
> again define bits please

these are not documented too

> > +	} else {
> > +		dev_info(&phy->dev, "bifurcation disabled\n");
>
> debug level?

i made them same as the "bifurcation enabled" to have always an info about it in dmesg.

> > +	if (ret)
> > +		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
> > +		       __func__, reg);
>
> Can this be made dev_err too, I still see bunch of pr_ and at least here
> you have driver context... while at it drop the __func__ from these logs
> too please

ok, i'll change it

> > diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
> > new file mode 100644
> > index 000000000000..93c997f520fe
> > --- /dev/null
> > +++ b/include/linux/phy/pcie.h
> > @@ -0,0 +1,12 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
>
> Header is 2021 !

i'll change

> --
> ~Vinod

regards Frank

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Aw: [PATCH v4 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy

[Frank Wunderlich]

Hi Rob,

this (and the other bindings) part is marked as "not applicable", but without comment...it is not clear
to me why it is not yet applied or how to proceed.

https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20220619082605.7935-2-linux@fw-web.de/

Do you expect driver-changes which will change binding too?

should i resend it unchanged in v5 (when 5.20-rc1 is out)? or do you try to move the data-lanes into
phy-provider which i have not got working?

regards Frank

Aw: [PATCH v4 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy

[Frank Wunderlich]

Hi Rob,

this (and the other bindings) part is marked as "not applicable", but without comment...it is not clear
to me why it is not yet applied or how to proceed.

https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20220619082605.7935-2-linux@fw-web.de/

Do you expect driver-changes which will change binding too?

should i resend it unchanged in v5 (when 5.20-rc1 is out)? or do you try to move the data-lanes into
phy-provider which i have not got working?

regards Frank

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Aw: [PATCH v4 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy

[Frank Wunderlich]

Hi Rob,

this (and the other bindings) part is marked as "not applicable", but without comment...it is not clear
to me why it is not yet applied or how to proceed.

https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20220619082605.7935-2-linux@fw-web.de/

Do you expect driver-changes which will change binding too?

should i resend it unchanged in v5 (when 5.20-rc1 is out)? or do you try to move the data-lanes into
phy-provider which i have not got working?

regards Frank

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel