All of lore.kernel.org
 help / color / mirror / Atom feed
From: Samuel Holland <samuel@sholland.org>
To: Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Holland <samuel@sholland.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Maxime Ripard <mripard@kernel.org>, Ondrej Jirman <x@xff.cz>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-sunxi@lists.linux.dev
Subject: [PATCH 1/6] dt-bindings: pinctrl: Add compatibles for Allwinner D1/D1s
Date: Sat, 25 Jun 2022 21:11:42 -0500	[thread overview]
Message-ID: <20220626021148.56740-2-samuel@sholland.org> (raw)
In-Reply-To: <20220626021148.56740-1-samuel@sholland.org>

D1 contains a pin controller similar to previous SoCs, but with some
register layout changes. It includes 6 interrupt-capable pin banks.

D1s is a low pin count version of the D1 SoC, with some pins omitted.
The remaining pins have the same function assignments as D1.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml      | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index bfce850c2035..3da52814f151 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -46,6 +46,8 @@ properties:
       - allwinner,sun8i-v3s-pinctrl
       - allwinner,sun9i-a80-pinctrl
       - allwinner,sun9i-a80-r-pinctrl
+      - allwinner,sun20i-d1-pinctrl
+      - allwinner,sun20i-d1s-pinctrl
       - allwinner,sun50i-a64-pinctrl
       - allwinner,sun50i-a64-r-pinctrl
       - allwinner,sun50i-a100-pinctrl
@@ -171,6 +173,19 @@ allOf:
           minItems: 7
           maxItems: 7
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun20i-d1-pinctrl
+            - allwinner,sun20i-d1s-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
   - if:
       properties:
         compatible:
-- 
2.35.1


WARNING: multiple messages have this Message-ID (diff)
From: Samuel Holland <samuel@sholland.org>
To: Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Holland <samuel@sholland.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Maxime Ripard <mripard@kernel.org>, Ondrej Jirman <x@xff.cz>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-sunxi@lists.linux.dev
Subject: [PATCH 1/6] dt-bindings: pinctrl: Add compatibles for Allwinner D1/D1s
Date: Sat, 25 Jun 2022 21:11:42 -0500	[thread overview]
Message-ID: <20220626021148.56740-2-samuel@sholland.org> (raw)
In-Reply-To: <20220626021148.56740-1-samuel@sholland.org>

D1 contains a pin controller similar to previous SoCs, but with some
register layout changes. It includes 6 interrupt-capable pin banks.

D1s is a low pin count version of the D1 SoC, with some pins omitted.
The remaining pins have the same function assignments as D1.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml      | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index bfce850c2035..3da52814f151 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -46,6 +46,8 @@ properties:
       - allwinner,sun8i-v3s-pinctrl
       - allwinner,sun9i-a80-pinctrl
       - allwinner,sun9i-a80-r-pinctrl
+      - allwinner,sun20i-d1-pinctrl
+      - allwinner,sun20i-d1s-pinctrl
       - allwinner,sun50i-a64-pinctrl
       - allwinner,sun50i-a64-r-pinctrl
       - allwinner,sun50i-a100-pinctrl
@@ -171,6 +173,19 @@ allOf:
           minItems: 7
           maxItems: 7
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun20i-d1-pinctrl
+            - allwinner,sun20i-d1s-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
   - if:
       properties:
         compatible:
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-06-26  2:11 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-26  2:11 [PATCH 0/6] pinctrl: sunxi: Allwinner D1/D1s support Samuel Holland
2022-06-26  2:11 ` Samuel Holland
2022-06-26  2:11 ` Samuel Holland [this message]
2022-06-26  2:11   ` [PATCH 1/6] dt-bindings: pinctrl: Add compatibles for Allwinner D1/D1s Samuel Holland
2022-06-26 10:37   ` Krzysztof Kozlowski
2022-06-26 10:37     ` Krzysztof Kozlowski
2022-07-01 13:02   ` Heiko Stuebner
2022-07-01 13:02     ` Heiko Stuebner
2022-07-11  8:58   ` Linus Walleij
2022-07-11  8:58     ` Linus Walleij
2022-07-12 10:14     ` Samuel Holland
2022-07-12 10:14       ` Samuel Holland
2022-07-13  2:56       ` Samuel Holland
2022-07-13  2:56         ` Samuel Holland
2022-06-26  2:11 ` [PATCH 2/6] pinctrl: sunxi: Add I/O bias setting for H6 R-PIO Samuel Holland
2022-06-26  2:11   ` Samuel Holland
2022-06-27 20:34   ` Jernej Škrabec
2022-06-27 20:34     ` Jernej Škrabec
2022-06-28  3:18     ` Samuel Holland
2022-06-28  3:18       ` Samuel Holland
2022-07-01 13:03   ` Heiko Stuebner
2022-07-01 13:03     ` Heiko Stuebner
2022-06-26  2:11 ` [PATCH 3/6] pinctrl: sunxi: Support the 2.5V I/O bias mode Samuel Holland
2022-06-26  2:11   ` Samuel Holland
2022-06-27 20:43   ` Jernej Škrabec
2022-06-27 20:43     ` Jernej Škrabec
2022-06-28  3:29     ` Samuel Holland
2022-06-28  3:29       ` Samuel Holland
2022-07-02 19:48       ` Jernej Škrabec
2022-07-02 19:48         ` Jernej Škrabec
2022-07-01 13:04   ` Heiko Stuebner
2022-07-01 13:04     ` Heiko Stuebner
2022-06-26  2:11 ` [PATCH 4/6] pinctrl: sunxi: Refactor register/offset calculation Samuel Holland
2022-06-26  2:11   ` Samuel Holland
2022-07-01 13:07   ` Heiko Stuebner
2022-07-01 13:07     ` Heiko Stuebner
2022-07-02 20:29   ` Jernej Škrabec
2022-07-02 20:29     ` Jernej Škrabec
2022-06-26  2:11 ` [PATCH 5/6] pinctrl: sunxi: Make some layout parameters dynamic Samuel Holland
2022-06-26  2:11   ` Samuel Holland
2022-07-01 13:09   ` Heiko Stuebner
2022-07-01 13:09     ` Heiko Stuebner
2022-07-02 20:33   ` Jernej Škrabec
2022-07-02 20:33     ` Jernej Škrabec
2022-06-26  2:11 ` [PATCH 6/6] pinctrl: sunxi: Add driver for Allwinner D1/D1s Samuel Holland
2022-06-26  2:11   ` Samuel Holland
2022-07-01 13:13   ` Heiko Stuebner
2022-07-01 13:13     ` Heiko Stuebner
2022-07-01 15:16     ` Samuel Holland
2022-07-01 15:16       ` Samuel Holland
2022-07-02 14:47   ` Andre Przywara
2022-07-02 14:47     ` Andre Przywara
2022-07-02 15:43     ` Samuel Holland
2022-07-02 15:43       ` Samuel Holland
2022-07-04  9:42       ` Andre Przywara
2022-07-04  9:42         ` Andre Przywara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220626021148.56740-2-samuel@sholland.org \
    --to=samuel@sholland.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    --cc=x@xff.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.