* [PATCH 5.15 001/135] random: schedule mix_interrupt_randomness() less often
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 002/135] random: quiet urandom warning ratelimit suppression message Greg Kroah-Hartman
` (141 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dominik Brodowski,
Sebastian Andrzej Siewior, Jason A. Donenfeld
From: Jason A. Donenfeld <Jason@zx2c4.com>
commit 534d2eaf1970274150596fdd2bf552721e65d6b2 upstream.
It used to be that mix_interrupt_randomness() would credit 1 bit each
time it ran, and so add_interrupt_randomness() would schedule mix() to
run every 64 interrupts, a fairly arbitrary number, but nonetheless
considered to be a decent enough conservative estimate.
Since e3e33fc2ea7f ("random: do not use input pool from hard IRQs"),
mix() is now able to credit multiple bits, depending on the number of
calls to add(). This was done for reasons separate from this commit, but
it has the nice side effect of enabling this patch to schedule mix()
less often.
Currently the rules are:
a) Credit 1 bit for every 64 calls to add().
b) Schedule mix() once a second that add() is called.
c) Schedule mix() once every 64 calls to add().
Rules (a) and (c) no longer need to be coupled. It's still important to
have _some_ value in (c), so that we don't "over-saturate" the fast
pool, but the once per second we get from rule (b) is a plenty enough
baseline. So, by increasing the 64 in rule (c) to something larger, we
avoid calling queue_work_on() as frequently during irq storms.
This commit changes that 64 in rule (c) to be 1024, which means we
schedule mix() 16 times less often. And it does *not* need to change the
64 in rule (a).
Fixes: 58340f8e952b ("random: defer fast pool mixing to worker")
Cc: stable@vger.kernel.org
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/char/random.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1000,7 +1000,7 @@ void add_interrupt_randomness(int irq)
if (new_count & MIX_INFLIGHT)
return;
- if (new_count < 64 && !time_is_before_jiffies(fast_pool->last + HZ))
+ if (new_count < 1024 && !time_is_before_jiffies(fast_pool->last + HZ))
return;
if (unlikely(!fast_pool->mix.func))
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 002/135] random: quiet urandom warning ratelimit suppression message
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 001/135] random: schedule mix_interrupt_randomness() less often Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 003/135] ALSA: hda/via: Fix missing beep setup Greg Kroah-Hartman
` (140 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jon Hunter, Ron Economos, Jason A. Donenfeld
From: Jason A. Donenfeld <Jason@zx2c4.com>
commit c01d4d0a82b71857be7449380338bc53dde2da92 upstream.
random.c ratelimits how much it warns about uninitialized urandom reads
using __ratelimit(). When the RNG is finally initialized, it prints the
number of missed messages due to ratelimiting.
It has been this way since that functionality was introduced back in
2018. Recently, cc1e127bfa95 ("random: remove ratelimiting for in-kernel
unseeded randomness") put a bit more stress on the urandom ratelimiting,
which teased out a bug in the implementation.
Specifically, when under pressure, __ratelimit() will print its own
message and reset the count back to 0, making the final message at the
end less useful. Secondly, it does so as a pr_warn(), which apparently
is undesirable for people's CI.
Fortunately, __ratelimit() has the RATELIMIT_MSG_ON_RELEASE flag exactly
for this purpose, so we set the flag.
Fixes: 4e00b339e264 ("random: rate limit unseeded randomness warnings")
Cc: stable@vger.kernel.org
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Ron Economos <re@w6rz.net>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/char/random.c | 2 +-
include/linux/ratelimit_types.h | 12 ++++++++----
2 files changed, 9 insertions(+), 5 deletions(-)
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -88,7 +88,7 @@ static RAW_NOTIFIER_HEAD(random_ready_ch
/* Control how we warn userspace. */
static struct ratelimit_state urandom_warning =
- RATELIMIT_STATE_INIT("warn_urandom_randomness", HZ, 3);
+ RATELIMIT_STATE_INIT_FLAGS("urandom_warning", HZ, 3, RATELIMIT_MSG_ON_RELEASE);
static int ratelimit_disable __read_mostly =
IS_ENABLED(CONFIG_WARN_ALL_UNSEEDED_RANDOM);
module_param_named(ratelimit_disable, ratelimit_disable, int, 0644);
--- a/include/linux/ratelimit_types.h
+++ b/include/linux/ratelimit_types.h
@@ -23,12 +23,16 @@ struct ratelimit_state {
unsigned long flags;
};
-#define RATELIMIT_STATE_INIT(name, interval_init, burst_init) { \
- .lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock), \
- .interval = interval_init, \
- .burst = burst_init, \
+#define RATELIMIT_STATE_INIT_FLAGS(name, interval_init, burst_init, flags_init) { \
+ .lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock), \
+ .interval = interval_init, \
+ .burst = burst_init, \
+ .flags = flags_init, \
}
+#define RATELIMIT_STATE_INIT(name, interval_init, burst_init) \
+ RATELIMIT_STATE_INIT_FLAGS(name, interval_init, burst_init, 0)
+
#define RATELIMIT_STATE_INIT_DISABLED \
RATELIMIT_STATE_INIT(ratelimit_state, 0, DEFAULT_RATELIMIT_BURST)
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 003/135] ALSA: hda/via: Fix missing beep setup
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 001/135] random: schedule mix_interrupt_randomness() less often Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 002/135] random: quiet urandom warning ratelimit suppression message Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 004/135] ALSA: hda/conexant: " Greg Kroah-Hartman
` (139 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit c7807b27d510e5aa53c8a120cfc02c33c24ebb5f upstream.
Like the previous fix for Conexant codec, the beep_nid has to be set
up before calling snd_hda_gen_parse_auto_config(); otherwise it'd miss
the path setup.
Fix the call order for addressing the missing beep setup.
Fixes: 0e8f9862493a ("ALSA: hda/via - Simplify control management")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152
Link: https://lore.kernel.org/r/20220620104008.1994-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_via.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -520,11 +520,11 @@ static int via_parse_auto_config(struct
if (err < 0)
return err;
- err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg);
+ err = auto_parse_beep(codec);
if (err < 0)
return err;
- err = auto_parse_beep(codec);
+ err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg);
if (err < 0)
return err;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 004/135] ALSA: hda/conexant: Fix missing beep setup
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 003/135] ALSA: hda/via: Fix missing beep setup Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 005/135] ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop Greg Kroah-Hartman
` (138 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 5faa0bc69102f3a4c605581564c367be5eb94dfa upstream.
Currently the Conexant codec driver sets up the beep NID after calling
snd_hda_gen_parse_auto_config(). It turned out that this results in
the insufficient setup for the beep control, as the generic parser
handles the fake path in snd_hda_gen_parse_auto_config() only if the
beep_nid is set up beforehand.
For dealing with the beep widget properly, call cx_auto_parse_beep()
before snd_hda_gen_parse_auto_config() call.
Fixes: 51e19ca5f755 ("ALSA: hda/conexant - Clean up beep code")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152
Link: https://lore.kernel.org/r/20220620104008.1994-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_conexant.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -1079,11 +1079,11 @@ static int patch_conexant_auto(struct hd
if (err < 0)
goto error;
- err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg);
+ err = cx_auto_parse_beep(codec);
if (err < 0)
goto error;
- err = cx_auto_parse_beep(codec);
+ err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg);
if (err < 0)
goto error;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 005/135] ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 004/135] ALSA: hda/conexant: " Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 006/135] ALSA: hda/realtek - ALC897 headset MIC no sound Greg Kroah-Hartman
` (137 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Soham Sen, Takashi Iwai
From: Soham Sen <contact@sohamsen.me>
commit b2e6b3d9bbb0a59ba7c710cc06e44cc548301f5f upstream.
The HP Omen 15 laptop needs a quirk to toggle the mute LED. It already is implemented for a different variant of the HP Omen laptop so a fixup entry is needed for this variant.
Signed-off-by: Soham Sen <contact@sohamsen.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220609181919.45535-1-contact@sohamsen.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8830,6 +8830,7 @@ static const struct snd_pci_quirk alc269
ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8783, "HP ZBook Fury 15 G7 Mobile Workstation",
ALC285_FIXUP_HP_GPIO_AMP_INIT),
+ SND_PCI_QUIRK(0x103c, 0x8787, "HP OMEN 15", ALC285_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x103c, 0x8788, "HP OMEN 15", ALC285_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x103c, 0x87c8, "HP", ALC287_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x87e5, "HP ProBook 440 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 006/135] ALSA: hda/realtek - ALC897 headset MIC no sound
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 005/135] ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 007/135] ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly Greg Kroah-Hartman
` (136 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kailang Yang, Takashi Iwai
From: Kailang Yang <kailang@realtek.com>
commit fe6900bd8156467365bd5b976df64928fdebfeb0 upstream.
There is not have Headset Mic verb table in BIOS default.
So, it will have recording issue from headset MIC.
Add the verb table value without jack detect. It will turn on Headset Mic.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/719133a27d8844a890002cb817001dfa@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10522,6 +10522,7 @@ enum {
ALC668_FIXUP_MIC_DET_COEF,
ALC897_FIXUP_LENOVO_HEADSET_MIC,
ALC897_FIXUP_HEADSET_MIC_PIN,
+ ALC897_FIXUP_HP_HSMIC_VERB,
};
static const struct hda_fixup alc662_fixups[] = {
@@ -10941,6 +10942,13 @@ static const struct hda_fixup alc662_fix
.chained = true,
.chain_id = ALC897_FIXUP_LENOVO_HEADSET_MIC
},
+ [ALC897_FIXUP_HP_HSMIC_VERB] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */
+ { }
+ },
+ },
};
static const struct snd_pci_quirk alc662_fixup_tbl[] = {
@@ -10966,6 +10974,7 @@ static const struct snd_pci_quirk alc662
SND_PCI_QUIRK(0x1028, 0x0698, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
+ SND_PCI_QUIRK(0x103c, 0x8719, "HP", ALC897_FIXUP_HP_HSMIC_VERB),
SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2),
SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP_HEADSET_MIC2),
SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE),
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 007/135] ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 006/135] ALSA: hda/realtek - ALC897 headset MIC no sound Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 008/135] ALSA: hda/realtek: Add quirk for Clevo PD70PNT Greg Kroah-Hartman
` (135 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, nikitashvets, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 56ec3e755bd1041d35bdec020a99b327697ee470 upstream.
It turned out that Lenovo shipped two completely different products
with the very same PCI SSID, where both require different quirks;
namely, Lenovo C940 has already the fixup for its speaker
(ALC298_FIXUP_LENOVO_SPK_VOLUME) with the PCI SSID 17aa:3818, while
Yoga Duet 7 has also the very same PCI SSID but requires a different
quirk, ALC287_FIXUP_YOGA7_14TIL_SPEAKERS.
Fortunately, both are with different codecs (C940 with ALC298 and Duet
7 with ALC287), hence we can apply different fixes by checking the
codec ID. This patch implements that special fixup function.
For easier handling, the internal function for applying a specific
fixup entry is exported as __snd_hda_apply_fixup(), so that it can be
called from the codec driver. The rest is simply calling it with a
different fixup ID depending on the codec ID.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: nikitashvets@flyium.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5ca147d1-3a2d-60c6-c491-8aa844183222@redhat.com
Link: https://lore.kernel.org/r/20220614054831.14648-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/hda_auto_parser.c | 7 ++++---
sound/pci/hda/hda_local.h | 1 +
sound/pci/hda/patch_realtek.c | 24 +++++++++++++++++++++++-
3 files changed, 28 insertions(+), 4 deletions(-)
--- a/sound/pci/hda/hda_auto_parser.c
+++ b/sound/pci/hda/hda_auto_parser.c
@@ -823,7 +823,7 @@ static void set_pin_targets(struct hda_c
snd_hda_set_pin_ctl_cache(codec, cfg->nid, cfg->val);
}
-static void apply_fixup(struct hda_codec *codec, int id, int action, int depth)
+void __snd_hda_apply_fixup(struct hda_codec *codec, int id, int action, int depth)
{
const char *modelname = codec->fixup_name;
@@ -833,7 +833,7 @@ static void apply_fixup(struct hda_codec
if (++depth > 10)
break;
if (fix->chained_before)
- apply_fixup(codec, fix->chain_id, action, depth + 1);
+ __snd_hda_apply_fixup(codec, fix->chain_id, action, depth + 1);
switch (fix->type) {
case HDA_FIXUP_PINS:
@@ -874,6 +874,7 @@ static void apply_fixup(struct hda_codec
id = fix->chain_id;
}
}
+EXPORT_SYMBOL_GPL(__snd_hda_apply_fixup);
/**
* snd_hda_apply_fixup - Apply the fixup chain with the given action
@@ -883,7 +884,7 @@ static void apply_fixup(struct hda_codec
void snd_hda_apply_fixup(struct hda_codec *codec, int action)
{
if (codec->fixup_list)
- apply_fixup(codec, codec->fixup_id, action, 0);
+ __snd_hda_apply_fixup(codec, codec->fixup_id, action, 0);
}
EXPORT_SYMBOL_GPL(snd_hda_apply_fixup);
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -350,6 +350,7 @@ void snd_hda_apply_verbs(struct hda_code
void snd_hda_apply_pincfgs(struct hda_codec *codec,
const struct hda_pintbl *cfg);
void snd_hda_apply_fixup(struct hda_codec *codec, int action);
+void __snd_hda_apply_fixup(struct hda_codec *codec, int id, int action, int depth);
void snd_hda_pick_fixup(struct hda_codec *codec,
const struct hda_model_fixup *models,
const struct snd_pci_quirk *quirk,
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6883,6 +6883,7 @@ enum {
ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS,
ALC287_FIXUP_LEGION_15IMHG05_AUTOMUTE,
ALC287_FIXUP_YOGA7_14ITL_SPEAKERS,
+ ALC298_FIXUP_LENOVO_C940_DUET7,
ALC287_FIXUP_13S_GEN2_SPEAKERS,
ALC256_FIXUP_SET_COEF_DEFAULTS,
ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE,
@@ -6892,6 +6893,23 @@ enum {
ALC285_FIXUP_LEGION_Y9000X_AUTOMUTE,
};
+/* A special fixup for Lenovo C940 and Yoga Duet 7;
+ * both have the very same PCI SSID, and we need to apply different fixups
+ * depending on the codec ID
+ */
+static void alc298_fixup_lenovo_c940_duet7(struct hda_codec *codec,
+ const struct hda_fixup *fix,
+ int action)
+{
+ int id;
+
+ if (codec->core.vendor_id == 0x10ec0298)
+ id = ALC298_FIXUP_LENOVO_SPK_VOLUME; /* C940 */
+ else
+ id = ALC287_FIXUP_YOGA7_14ITL_SPEAKERS; /* Duet 7 */
+ __snd_hda_apply_fixup(codec, id, action, 0);
+}
+
static const struct hda_fixup alc269_fixups[] = {
[ALC269_FIXUP_GPIO2] = {
.type = HDA_FIXUP_FUNC,
@@ -8591,6 +8609,10 @@ static const struct hda_fixup alc269_fix
.chained = true,
.chain_id = ALC269_FIXUP_HEADSET_MODE,
},
+ [ALC298_FIXUP_LENOVO_C940_DUET7] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc298_fixup_lenovo_c940_duet7,
+ },
[ALC287_FIXUP_13S_GEN2_SPEAKERS] = {
.type = HDA_FIXUP_VERBS,
.v.verbs = (const struct hda_verb[]) {
@@ -9060,7 +9082,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x17aa, 0x31af, "ThinkCentre Station", ALC623_FIXUP_LENOVO_THINKSTATION_P340),
SND_PCI_QUIRK(0x17aa, 0x3802, "Lenovo Yoga DuetITL 2021", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS),
SND_PCI_QUIRK(0x17aa, 0x3813, "Legion 7i 15IMHG05", ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS),
- SND_PCI_QUIRK(0x17aa, 0x3818, "Lenovo C940", ALC298_FIXUP_LENOVO_SPK_VOLUME),
+ SND_PCI_QUIRK(0x17aa, 0x3818, "Lenovo C940 / Yoga Duet 7", ALC298_FIXUP_LENOVO_C940_DUET7),
SND_PCI_QUIRK(0x17aa, 0x3819, "Lenovo 13s Gen2 ITL", ALC287_FIXUP_13S_GEN2_SPEAKERS),
SND_PCI_QUIRK(0x17aa, 0x3820, "Yoga Duet 7 13ITL6", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS),
SND_PCI_QUIRK(0x17aa, 0x3824, "Legion Y9000X 2020", ALC285_FIXUP_LEGION_Y9000X_SPEAKERS),
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 008/135] ALSA: hda/realtek: Add quirk for Clevo PD70PNT
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 007/135] ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 009/135] ALSA: hda/realtek: Add quirk for Clevo NS50PU Greg Kroah-Hartman
` (134 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tim Crawford, Takashi Iwai
From: Tim Crawford <tcrawford@system76.com>
commit d49951219b0249d3eff49e4f02e0de82357bc8a0 upstream.
Fixes speaker output and headset detection on Clevo PD70PNT.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220617133028.50568-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2629,6 +2629,7 @@ static const struct snd_pci_quirk alc882
SND_PCI_QUIRK(0x1558, 0x67e1, "Clevo PB71[DE][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x67f1, "Clevo PC70H[PRS]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x67f5, "Clevo PD70PN[NRT]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170SM", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x7715, "Clevo X170KM-G", ALC1220_FIXUP_CLEVO_PB51ED),
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 009/135] ALSA: hda/realtek: Add quirk for Clevo NS50PU
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 008/135] ALSA: hda/realtek: Add quirk for Clevo PD70PNT Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 010/135] net: openvswitch: fix parsing of nw_proto for IPv6 fragments Greg Kroah-Hartman
` (133 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tim Crawford, Takashi Iwai
From: Tim Crawford <tcrawford@system76.com>
commit 627ce0d68eb4b53e995b08089fa9da1e513ec5ba upstream.
Fixes headset detection on Clevo NS50PU.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220622150017.9897-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9000,6 +9000,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1558, 0x70f3, "Clevo NH77DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x70f4, "Clevo NH77EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x70f6, "Clevo NH77DPQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x7716, "Clevo NS50PU", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x8228, "Clevo NR40BU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x8520, "Clevo NH50D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x8521, "Clevo NH77D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 010/135] net: openvswitch: fix parsing of nw_proto for IPv6 fragments
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 009/135] ALSA: hda/realtek: Add quirk for Clevo NS50PU Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 011/135] 9p: Fix refcounting during full path walks for fid lookups Greg Kroah-Hartman
` (132 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rosemarie ORiorden, Eelco Chaudron,
Paolo Abeni
From: Rosemarie O'Riorden <roriorden@redhat.com>
commit 12378a5a75e33f34f8586706eb61cca9e6d4690c upstream.
When a packet enters the OVS datapath and does not match any existing
flows installed in the kernel flow cache, the packet will be sent to
userspace to be parsed, and a new flow will be created. The kernel and
OVS rely on each other to parse packet fields in the same way so that
packets will be handled properly.
As per the design document linked below, OVS expects all later IPv6
fragments to have nw_proto=44 in the flow key, so they can be correctly
matched on OpenFlow rules. OpenFlow controllers create pipelines based
on this design.
This behavior was changed by the commit in the Fixes tag so that
nw_proto equals the next_header field of the last extension header.
However, there is no counterpart for this change in OVS userspace,
meaning that this field is parsed differently between OVS and the
kernel. This is a problem because OVS creates actions based on what is
parsed in userspace, but the kernel-provided flow key is used as a match
criteria, as described in Documentation/networking/openvswitch.rst. This
leads to issues such as packets incorrectly matching on a flow and thus
the wrong list of actions being applied to the packet. Such changes in
packet parsing cannot be implemented without breaking the userspace.
The offending commit is partially reverted to restore the expected
behavior.
The change technically made sense and there is a good reason that it was
implemented, but it does not comply with the original design of OVS.
If in the future someone wants to implement such a change, then it must
be user-configurable and disabled by default to preserve backwards
compatibility with existing OVS versions.
Cc: stable@vger.kernel.org
Fixes: fa642f08839b ("openvswitch: Derive IP protocol number for IPv6 later frags")
Link: https://docs.openvswitch.org/en/latest/topics/design/#fragments
Signed-off-by: Rosemarie O'Riorden <roriorden@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220621204845.9721-1-roriorden@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/openvswitch/flow.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/openvswitch/flow.c
+++ b/net/openvswitch/flow.c
@@ -266,7 +266,7 @@ static int parse_ipv6hdr(struct sk_buff
if (flags & IP6_FH_F_FRAG) {
if (frag_off) {
key->ip.frag = OVS_FRAG_TYPE_LATER;
- key->ip.proto = nexthdr;
+ key->ip.proto = NEXTHDR_FRAGMENT;
return 0;
}
key->ip.frag = OVS_FRAG_TYPE_FIRST;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 011/135] 9p: Fix refcounting during full path walks for fid lookups
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 010/135] net: openvswitch: fix parsing of nw_proto for IPv6 fragments Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 012/135] 9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl Greg Kroah-Hartman
` (131 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tyler Hicks, Christian Schoenebeck,
Dominique Martinet
From: Tyler Hicks <tyhicks@linux.microsoft.com>
commit 2a3dcbccd64ba35c045fac92272ff981c4cbef44 upstream.
Decrement the refcount of the parent dentry's fid after walking
each path component during a full path walk for a lookup. Failure to do
so can lead to fids that are not clunked until the filesystem is
unmounted, as indicated by this warning:
9pnet: found fid 3 not clunked
The improper refcounting after walking resulted in open(2) returning
-EIO on any directories underneath the mount point when using the virtio
transport. When using the fd transport, there's no apparent issue until
the filesytem is unmounted and the warning above is emitted to the logs.
In some cases, the user may not yet be attached to the filesystem and a
new root fid, associated with the user, is created and attached to the
root dentry before the full path walk is performed. Increment the new
root fid's refcount to two in that situation so that it can be safely
decremented to one after it is used for the walk operation. The new fid
will still be attached to the root dentry when
v9fs_fid_lookup_with_uid() returns so a final refcount of one is
correct/expected.
Link: https://lkml.kernel.org/r/20220527000003.355812-2-tyhicks@linux.microsoft.com
Link: https://lkml.kernel.org/r/20220612085330.1451496-4-asmadeus@codewreck.org
Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: fix clunking fid multiple times discussed in second link]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/9p/fid.c | 22 +++++++++-------------
1 file changed, 9 insertions(+), 13 deletions(-)
--- a/fs/9p/fid.c
+++ b/fs/9p/fid.c
@@ -151,7 +151,7 @@ static struct p9_fid *v9fs_fid_lookup_wi
const unsigned char **wnames, *uname;
int i, n, l, clone, access;
struct v9fs_session_info *v9ses;
- struct p9_fid *fid, *old_fid = NULL;
+ struct p9_fid *fid, *old_fid;
v9ses = v9fs_dentry2v9ses(dentry);
access = v9ses->flags & V9FS_ACCESS_MASK;
@@ -193,13 +193,12 @@ static struct p9_fid *v9fs_fid_lookup_wi
if (IS_ERR(fid))
return fid;
+ refcount_inc(&fid->count);
v9fs_fid_add(dentry->d_sb->s_root, fid);
}
/* If we are root ourself just return that */
- if (dentry->d_sb->s_root == dentry) {
- refcount_inc(&fid->count);
+ if (dentry->d_sb->s_root == dentry)
return fid;
- }
/*
* Do a multipath walk with attached root.
* When walking parent we need to make sure we
@@ -211,6 +210,7 @@ static struct p9_fid *v9fs_fid_lookup_wi
fid = ERR_PTR(n);
goto err_out;
}
+ old_fid = fid;
clone = 1;
i = 0;
while (i < n) {
@@ -220,19 +220,15 @@ static struct p9_fid *v9fs_fid_lookup_wi
* walk to ensure none of the patch component change
*/
fid = p9_client_walk(fid, l, &wnames[i], clone);
+ /* non-cloning walk will return the same fid */
+ if (fid != old_fid) {
+ p9_client_clunk(old_fid);
+ old_fid = fid;
+ }
if (IS_ERR(fid)) {
- if (old_fid) {
- /*
- * If we fail, clunk fid which are mapping
- * to path component and not the last component
- * of the path.
- */
- p9_client_clunk(old_fid);
- }
kfree(wnames);
goto err_out;
}
- old_fid = fid;
i += l;
clone = 0;
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 012/135] 9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 011/135] 9p: Fix refcounting during full path walks for fid lookups Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 013/135] 9p: fix fid refcount leak in v9fs_vfs_get_link Greg Kroah-Hartman
` (130 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tyler Hicks, Christian Schoenebeck,
Dominique Martinet
From: Dominique Martinet <asmadeus@codewreck.org>
commit beca774fc51a9ba8abbc869cf0c3d965ff17cd24 upstream.
We need to release directory fid if we fail halfway through open
This fixes fid leaking with xfstests generic 531
Link: https://lkml.kernel.org/r/20220612085330.1451496-2-asmadeus@codewreck.org
Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Reported-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/9p/vfs_inode_dotl.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/9p/vfs_inode_dotl.c
+++ b/fs/9p/vfs_inode_dotl.c
@@ -276,6 +276,7 @@ v9fs_vfs_atomic_open_dotl(struct inode *
if (IS_ERR(ofid)) {
err = PTR_ERR(ofid);
p9_debug(P9_DEBUG_VFS, "p9_client_walk failed %d\n", err);
+ p9_client_clunk(dfid);
goto out;
}
@@ -287,6 +288,7 @@ v9fs_vfs_atomic_open_dotl(struct inode *
if (err) {
p9_debug(P9_DEBUG_VFS, "Failed to get acl values in creat %d\n",
err);
+ p9_client_clunk(dfid);
goto error;
}
err = p9_client_create_dotl(ofid, name, v9fs_open_to_dotl_flags(flags),
@@ -294,6 +296,7 @@ v9fs_vfs_atomic_open_dotl(struct inode *
if (err < 0) {
p9_debug(P9_DEBUG_VFS, "p9_client_open_dotl failed in creat %d\n",
err);
+ p9_client_clunk(dfid);
goto error;
}
v9fs_invalidate_inode_attr(dir);
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 013/135] 9p: fix fid refcount leak in v9fs_vfs_get_link
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 012/135] 9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 014/135] btrfs: fix hang during unmount when block group reclaim task is running Greg Kroah-Hartman
` (129 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tyler Hicks, Christian Schoenebeck,
Dominique Martinet
From: Dominique Martinet <asmadeus@codewreck.org>
commit e5690f263208c5abce7451370b7786eb25b405eb upstream.
we check for protocol version later than required, after a fid has
been obtained. Just move the version check earlier.
Link: https://lkml.kernel.org/r/20220612085330.1451496-3-asmadeus@codewreck.org
Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/9p/vfs_inode.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -1228,15 +1228,15 @@ static const char *v9fs_vfs_get_link(str
return ERR_PTR(-ECHILD);
v9ses = v9fs_dentry2v9ses(dentry);
- fid = v9fs_fid_lookup(dentry);
+ if (!v9fs_proto_dotu(v9ses))
+ return ERR_PTR(-EBADF);
+
p9_debug(P9_DEBUG_VFS, "%pd\n", dentry);
+ fid = v9fs_fid_lookup(dentry);
if (IS_ERR(fid))
return ERR_CAST(fid);
- if (!v9fs_proto_dotu(v9ses))
- return ERR_PTR(-EBADF);
-
st = p9_client_stat(fid);
p9_client_clunk(fid);
if (IS_ERR(st))
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 014/135] btrfs: fix hang during unmount when block group reclaim task is running
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 013/135] 9p: fix fid refcount leak in v9fs_vfs_get_link Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 015/135] btrfs: prevent remounting to v1 space cache for subpage mount Greg Kroah-Hartman
` (128 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Filipe Manana, David Sterba
From: Filipe Manana <fdmanana@suse.com>
commit 31e70e527806c546a72262f2fc3d982ee23c42d3 upstream.
When we start an unmount, at close_ctree(), if we have the reclaim task
running and in the middle of a data block group relocation, we can trigger
a deadlock when stopping an async reclaim task, producing a trace like the
following:
[629724.498185] task:kworker/u16:7 state:D stack: 0 pid:681170 ppid: 2 flags:0x00004000
[629724.499760] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
[629724.501267] Call Trace:
[629724.501759] <TASK>
[629724.502174] __schedule+0x3cb/0xed0
[629724.502842] schedule+0x4e/0xb0
[629724.503447] btrfs_wait_on_delayed_iputs+0x7c/0xc0 [btrfs]
[629724.504534] ? prepare_to_wait_exclusive+0xc0/0xc0
[629724.505442] flush_space+0x423/0x630 [btrfs]
[629724.506296] ? rcu_read_unlock_trace_special+0x20/0x50
[629724.507259] ? lock_release+0x220/0x4a0
[629724.507932] ? btrfs_get_alloc_profile+0xb3/0x290 [btrfs]
[629724.508940] ? do_raw_spin_unlock+0x4b/0xa0
[629724.509688] btrfs_async_reclaim_metadata_space+0x139/0x320 [btrfs]
[629724.510922] process_one_work+0x252/0x5a0
[629724.511694] ? process_one_work+0x5a0/0x5a0
[629724.512508] worker_thread+0x52/0x3b0
[629724.513220] ? process_one_work+0x5a0/0x5a0
[629724.514021] kthread+0xf2/0x120
[629724.514627] ? kthread_complete_and_exit+0x20/0x20
[629724.515526] ret_from_fork+0x22/0x30
[629724.516236] </TASK>
[629724.516694] task:umount state:D stack: 0 pid:719055 ppid:695412 flags:0x00004000
[629724.518269] Call Trace:
[629724.518746] <TASK>
[629724.519160] __schedule+0x3cb/0xed0
[629724.519835] schedule+0x4e/0xb0
[629724.520467] schedule_timeout+0xed/0x130
[629724.521221] ? lock_release+0x220/0x4a0
[629724.521946] ? lock_acquired+0x19c/0x420
[629724.522662] ? trace_hardirqs_on+0x1b/0xe0
[629724.523411] __wait_for_common+0xaf/0x1f0
[629724.524189] ? usleep_range_state+0xb0/0xb0
[629724.524997] __flush_work+0x26d/0x530
[629724.525698] ? flush_workqueue_prep_pwqs+0x140/0x140
[629724.526580] ? lock_acquire+0x1a0/0x310
[629724.527324] __cancel_work_timer+0x137/0x1c0
[629724.528190] close_ctree+0xfd/0x531 [btrfs]
[629724.529000] ? evict_inodes+0x166/0x1c0
[629724.529510] generic_shutdown_super+0x74/0x120
[629724.530103] kill_anon_super+0x14/0x30
[629724.530611] btrfs_kill_super+0x12/0x20 [btrfs]
[629724.531246] deactivate_locked_super+0x31/0xa0
[629724.531817] cleanup_mnt+0x147/0x1c0
[629724.532319] task_work_run+0x5c/0xa0
[629724.532984] exit_to_user_mode_prepare+0x1a6/0x1b0
[629724.533598] syscall_exit_to_user_mode+0x16/0x40
[629724.534200] do_syscall_64+0x48/0x90
[629724.534667] entry_SYSCALL_64_after_hwframe+0x44/0xae
[629724.535318] RIP: 0033:0x7fa2b90437a7
[629724.535804] RSP: 002b:00007ffe0b7e4458 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[629724.536912] RAX: 0000000000000000 RBX: 00007fa2b9182264 RCX: 00007fa2b90437a7
[629724.538156] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000555d6cf20dd0
[629724.539053] RBP: 0000555d6cf20ba0 R08: 0000000000000000 R09: 00007ffe0b7e3200
[629724.539956] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[629724.540883] R13: 0000555d6cf20dd0 R14: 0000555d6cf20cb0 R15: 0000000000000000
[629724.541796] </TASK>
This happens because:
1) Before entering close_ctree() we have the async block group reclaim
task running and relocating a data block group;
2) There's an async metadata (or data) space reclaim task running;
3) We enter close_ctree() and park the cleaner kthread;
4) The async space reclaim task is at flush_space() and runs all the
existing delayed iputs;
5) Before the async space reclaim task calls
btrfs_wait_on_delayed_iputs(), the block group reclaim task which is
doing the data block group relocation, creates a delayed iput at
replace_file_extents() (called when COWing leaves that have file extent
items pointing to relocated data extents, during the merging phase
of relocation roots);
6) The async reclaim space reclaim task blocks at
btrfs_wait_on_delayed_iputs(), since we have a new delayed iput;
7) The task at close_ctree() then calls cancel_work_sync() to stop the
async space reclaim task, but it blocks since that task is waiting for
the delayed iput to be run;
8) The delayed iput is never run because the cleaner kthread is parked,
and no one else runs delayed iputs, resulting in a hang.
So fix this by stopping the async block group reclaim task before we
park the cleaner kthread.
Fixes: 18bb8bbf13c183 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/disk-io.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -4360,6 +4360,17 @@ void __cold close_ctree(struct btrfs_fs_
int ret;
set_bit(BTRFS_FS_CLOSING_START, &fs_info->flags);
+
+ /*
+ * We may have the reclaim task running and relocating a data block group,
+ * in which case it may create delayed iputs. So stop it before we park
+ * the cleaner kthread otherwise we can get new delayed iputs after
+ * parking the cleaner, and that can make the async reclaim task to hang
+ * if it's waiting for delayed iputs to complete, since the cleaner is
+ * parked and can not run delayed iputs - this will make us hang when
+ * trying to stop the async reclaim task.
+ */
+ cancel_work_sync(&fs_info->reclaim_bgs_work);
/*
* We don't want the cleaner to start new transactions, add more delayed
* iputs, etc. while we're closing. We can't use kthread_stop() yet
@@ -4400,8 +4411,6 @@ void __cold close_ctree(struct btrfs_fs_
cancel_work_sync(&fs_info->async_data_reclaim_work);
cancel_work_sync(&fs_info->preempt_reclaim_work);
- cancel_work_sync(&fs_info->reclaim_bgs_work);
-
/* Cancel or finish ongoing discard work */
btrfs_discard_cleanup(fs_info);
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 015/135] btrfs: prevent remounting to v1 space cache for subpage mount
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 014/135] btrfs: fix hang during unmount when block group reclaim task is running Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 016/135] btrfs: add error messages to all unrecognized mount options Greg Kroah-Hartman
` (127 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Qu Wenruo, David Sterba
From: Qu Wenruo <wqu@suse.com>
commit 0591f04036218d572d54349ea8c7914ad9c82b2b upstream.
Upstream commit 9f73f1aef98b ("btrfs: force v2 space cache usage for
subpage mount") forces subpage mount to use v2 cache, to avoid
deprecated v1 cache which doesn't support subpage properly.
But there is a loophole that user can still remount to v1 cache.
The existing check will only give users a warning, but does not really
prevent to do the remount.
Although remounting to v1 will not cause any problems since the v1 cache
will always be marked invalid when mounted with a different page size,
it's still better to prevent v1 cache at all for subpage mounts.
Fixes: 9f73f1aef98b ("btrfs: force v2 space cache usage for subpage mount")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/super.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -1917,6 +1917,14 @@ static int btrfs_remount(struct super_bl
if (ret)
goto restore;
+ /* V1 cache is not supported for subpage mount. */
+ if (fs_info->sectorsize < PAGE_SIZE && btrfs_test_opt(fs_info, SPACE_CACHE)) {
+ btrfs_warn(fs_info,
+ "v1 space cache is not supported for page size %lu with sectorsize %u",
+ PAGE_SIZE, fs_info->sectorsize);
+ ret = -EINVAL;
+ goto restore;
+ }
btrfs_remount_begin(fs_info, old_opts, *flags);
btrfs_resize_thread_pool(fs_info,
fs_info->thread_pool_size, old_thread_pool_size);
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 016/135] btrfs: add error messages to all unrecognized mount options
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 015/135] btrfs: prevent remounting to v1 space cache for subpage mount Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 017/135] scsi: ibmvfc: Store vhost pointer during subcrq allocation Greg Kroah-Hartman
` (126 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Qu Wenruo, Nikolay Borisov,
Anand Jain, David Sterba
From: David Sterba <dsterba@suse.com>
commit e3a4167c880cf889f66887a152799df4d609dd21 upstream.
Almost none of the errors stemming from a valid mount option but wrong
value prints a descriptive message which would help to identify why
mount failed. Like in the linked report:
$ uname -r
v4.19
$ mount -o compress=zstd /dev/sdb /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on
/dev/sdb, missing codepage or helper program, or other error.
$ dmesg
...
BTRFS error (device sdb): open_ctree failed
Errors caused by memory allocation failures are left out as it's not a
user error so reporting that would be confusing.
Link: https://lore.kernel.org/linux-btrfs/9c3fec36-fc61-3a33-4977-a7e207c3fa4e@gmx.de/
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/super.c | 39 ++++++++++++++++++++++++++++++++-------
1 file changed, 32 insertions(+), 7 deletions(-)
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -712,6 +712,8 @@ int btrfs_parse_options(struct btrfs_fs_
compress_force = false;
no_compress++;
} else {
+ btrfs_err(info, "unrecognized compression value %s",
+ args[0].from);
ret = -EINVAL;
goto out;
}
@@ -770,8 +772,11 @@ int btrfs_parse_options(struct btrfs_fs_
case Opt_thread_pool:
ret = match_int(&args[0], &intarg);
if (ret) {
+ btrfs_err(info, "unrecognized thread_pool value %s",
+ args[0].from);
goto out;
} else if (intarg == 0) {
+ btrfs_err(info, "invalid value 0 for thread_pool");
ret = -EINVAL;
goto out;
}
@@ -832,8 +837,11 @@ int btrfs_parse_options(struct btrfs_fs_
break;
case Opt_ratio:
ret = match_int(&args[0], &intarg);
- if (ret)
+ if (ret) {
+ btrfs_err(info, "unrecognized metadata_ratio value %s",
+ args[0].from);
goto out;
+ }
info->metadata_ratio = intarg;
btrfs_info(info, "metadata ratio %u",
info->metadata_ratio);
@@ -850,6 +858,8 @@ int btrfs_parse_options(struct btrfs_fs_
btrfs_set_and_info(info, DISCARD_ASYNC,
"turning on async discard");
} else {
+ btrfs_err(info, "unrecognized discard mode value %s",
+ args[0].from);
ret = -EINVAL;
goto out;
}
@@ -874,6 +884,8 @@ int btrfs_parse_options(struct btrfs_fs_
btrfs_set_and_info(info, FREE_SPACE_TREE,
"enabling free space tree");
} else {
+ btrfs_err(info, "unrecognized space_cache value %s",
+ args[0].from);
ret = -EINVAL;
goto out;
}
@@ -943,8 +955,12 @@ int btrfs_parse_options(struct btrfs_fs_
break;
case Opt_check_integrity_print_mask:
ret = match_int(&args[0], &intarg);
- if (ret)
+ if (ret) {
+ btrfs_err(info,
+ "unrecognized check_integrity_print_mask value %s",
+ args[0].from);
goto out;
+ }
info->check_integrity_print_mask = intarg;
btrfs_info(info, "check_integrity_print_mask 0x%x",
info->check_integrity_print_mask);
@@ -959,13 +975,15 @@ int btrfs_parse_options(struct btrfs_fs_
goto out;
#endif
case Opt_fatal_errors:
- if (strcmp(args[0].from, "panic") == 0)
+ if (strcmp(args[0].from, "panic") == 0) {
btrfs_set_opt(info->mount_opt,
PANIC_ON_FATAL_ERROR);
- else if (strcmp(args[0].from, "bug") == 0)
+ } else if (strcmp(args[0].from, "bug") == 0) {
btrfs_clear_opt(info->mount_opt,
PANIC_ON_FATAL_ERROR);
- else {
+ } else {
+ btrfs_err(info, "unrecognized fatal_errors value %s",
+ args[0].from);
ret = -EINVAL;
goto out;
}
@@ -973,8 +991,12 @@ int btrfs_parse_options(struct btrfs_fs_
case Opt_commit_interval:
intarg = 0;
ret = match_int(&args[0], &intarg);
- if (ret)
+ if (ret) {
+ btrfs_err(info, "unrecognized commit_interval value %s",
+ args[0].from);
+ ret = -EINVAL;
goto out;
+ }
if (intarg == 0) {
btrfs_info(info,
"using default commit interval %us",
@@ -988,8 +1010,11 @@ int btrfs_parse_options(struct btrfs_fs_
break;
case Opt_rescue:
ret = parse_rescue_options(info, args[0].from);
- if (ret < 0)
+ if (ret < 0) {
+ btrfs_err(info, "unrecognized rescue value %s",
+ args[0].from);
goto out;
+ }
break;
#ifdef CONFIG_BTRFS_DEBUG
case Opt_fragment_all:
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 017/135] scsi: ibmvfc: Store vhost pointer during subcrq allocation
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 016/135] btrfs: add error messages to all unrecognized mount options Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 018/135] scsi: ibmvfc: Allocate/free queue resource only during probe/remove Greg Kroah-Hartman
` (125 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brian King, Tyrel Datwyler,
Martin K. Petersen
From: Tyrel Datwyler <tyreld@linux.ibm.com>
commit aeaadcde1a60138bceb65de3cdaeec78170b4459 upstream.
Currently the back pointer from a queue to the vhost adapter isn't set
until after subcrq interrupt registration. The value is available when a
queue is first allocated and can/should be also set for primary and async
queues as well as subcrqs.
This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS
interrupt controller where a pending subcrq interrupt from the previous
kernel can be replayed immediately upon IRQ registration resulting in
dereference of a garbage backpointer in ibmvfc_interrupt_scsi().
Kernel attempted to read user page (58) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000058
Faulting instruction address: 0xc008000003216a08
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc]
LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
Call Trace:
[c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable)
[c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
[c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188
[c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310
[c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80
[c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0
[c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130
[c000000014622f60] [0000000020000000] 0x20000000
[c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0
[c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0
[c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170
[c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0
[c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0
[c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230
[c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc]
[c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc]
[c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc]
[c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc]
[c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc]
Link: https://lore.kernel.org/r/20220616191126.1281259-2-tyreld@linux.ibm.com
Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Cc: stable@vger.kernel.org
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 3 ++-
drivers/scsi/ibmvscsi/ibmvfc.h | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -5680,6 +5680,8 @@ static int ibmvfc_alloc_queue(struct ibm
queue->cur = 0;
queue->fmt = fmt;
queue->size = PAGE_SIZE / fmt_size;
+
+ queue->vhost = vhost;
return 0;
}
@@ -5788,7 +5790,6 @@ static int ibmvfc_register_scsi_channel(
}
scrq->hwq_id = index;
- scrq->vhost = vhost;
LEAVE;
return 0;
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -789,6 +789,7 @@ struct ibmvfc_queue {
spinlock_t _lock;
spinlock_t *q_lock;
+ struct ibmvfc_host *vhost;
struct ibmvfc_event_pool evt_pool;
struct list_head sent;
struct list_head free;
@@ -797,7 +798,6 @@ struct ibmvfc_queue {
union ibmvfc_iu cancel_rsp;
/* Sub-CRQ fields */
- struct ibmvfc_host *vhost;
unsigned long cookie;
unsigned long vios_cookie;
unsigned long hw_irq;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 018/135] scsi: ibmvfc: Allocate/free queue resource only during probe/remove
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 017/135] scsi: ibmvfc: Store vhost pointer during subcrq allocation Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 019/135] mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing Greg Kroah-Hartman
` (124 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brian King, Tyrel Datwyler,
Martin K. Petersen
From: Tyrel Datwyler <tyreld@linux.ibm.com>
commit 72ea7fe0db73d65c7d977208842d8ade9b823de9 upstream.
Currently, the sub-queues and event pool resources are allocated/freed for
every CRQ connection event such as reset and LPM. This exposes the driver
to a couple issues. First the inefficiency of freeing and reallocating
memory that can simply be resued after being sanitized. Further, a system
under memory pressue runs the risk of allocation failures that could result
in a crippled driver. Finally, there is a race window where command
submission/compeletion can try to pull/return elements from/to an event
pool that is being deleted or already has been deleted due to the lack of
host state around freeing/allocating resources. The following is an example
of list corruption following a live partition migration (LPM):
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: vfat fat isofs cdrom ext4 mbcache jbd2 nft_counter nft_compat nf_tables nfnetlink rpadlpar_io rpaphp xsk_diag nfsv3 nfs_acl nfs lockd grace fscache netfs rfkill bonding tls sunrpc pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth vmx_crypto dm_multipath dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
CPU: 0 PID: 2108 Comm: ibmvfc_0 Kdump: loaded Not tainted 5.14.0-70.9.1.el9_0.ppc64le #1
NIP: c0000000007c4bb0 LR: c0000000007c4bac CTR: 00000000005b9a10
REGS: c00000025c10b760 TRAP: 0700 Not tainted (5.14.0-70.9.1.el9_0.ppc64le)
MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 2800028f XER: 0000000f
CFAR: c0000000001f55bc IRQMASK: 0
GPR00: c0000000007c4bac c00000025c10ba00 c000000002a47c00 000000000000004e
GPR04: c0000031e3006f88 c0000031e308bd00 c00000025c10b768 0000000000000027
GPR08: 0000000000000000 c0000031e3009dc0 00000031e0eb0000 0000000000000000
GPR12: c0000031e2ffffa8 c000000002dd0000 c000000000187108 c00000020fcee2c0
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000002f81300
GPR24: 5deadbeef0000100 5deadbeef0000122 c000000263ba6910 c00000024cc88000
GPR28: 000000000000003c c0000002430a0000 c0000002430ac300 000000000000c300
NIP [c0000000007c4bb0] __list_del_entry_valid+0x90/0x100
LR [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100
Call Trace:
[c00000025c10ba00] [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 (unreliable)
[c00000025c10ba60] [c008000002f42284] ibmvfc_free_queue+0xec/0x210 [ibmvfc]
[c00000025c10bb10] [c008000002f4246c] ibmvfc_deregister_scsi_channel+0xc4/0x160 [ibmvfc]
[c00000025c10bba0] [c008000002f42580] ibmvfc_release_sub_crqs+0x78/0x130 [ibmvfc]
[c00000025c10bc20] [c008000002f4f6cc] ibmvfc_do_work+0x5c4/0xc70 [ibmvfc]
[c00000025c10bce0] [c008000002f4fdec] ibmvfc_work+0x74/0x1e8 [ibmvfc]
[c00000025c10bda0] [c0000000001872b8] kthread+0x1b8/0x1c0
[c00000025c10be10] [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
40820034 38600001 38210060 4e800020 7c0802a6 7c641b78 3c62fe7a 7d254b78
3863b590 f8010070 4ba309cd 60000000 <0fe00000> 7c0802a6 3c62fe7a 3863b640
---[ end trace 11a2b65a92f8b66c ]---
ibmvfc 30000003: Send warning. Receive queue closed, will retry.
Add registration/deregistration helpers that are called instead during
connection resets to sanitize and reconfigure the queues.
Link: https://lore.kernel.org/r/20220616191126.1281259-3-tyreld@linux.ibm.com
Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Cc: stable@vger.kernel.org
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 79 ++++++++++++++++++++++++++++++++---------
1 file changed, 62 insertions(+), 17 deletions(-)
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -160,8 +160,8 @@ static void ibmvfc_npiv_logout(struct ib
static void ibmvfc_tgt_implicit_logout_and_del(struct ibmvfc_target *);
static void ibmvfc_tgt_move_login(struct ibmvfc_target *);
-static void ibmvfc_release_sub_crqs(struct ibmvfc_host *);
-static void ibmvfc_init_sub_crqs(struct ibmvfc_host *);
+static void ibmvfc_dereg_sub_crqs(struct ibmvfc_host *);
+static void ibmvfc_reg_sub_crqs(struct ibmvfc_host *);
static const char *unknown_error = "unknown error";
@@ -917,7 +917,7 @@ static int ibmvfc_reenable_crq_queue(str
struct vio_dev *vdev = to_vio_dev(vhost->dev);
unsigned long flags;
- ibmvfc_release_sub_crqs(vhost);
+ ibmvfc_dereg_sub_crqs(vhost);
/* Re-enable the CRQ */
do {
@@ -936,7 +936,7 @@ static int ibmvfc_reenable_crq_queue(str
spin_unlock(vhost->crq.q_lock);
spin_unlock_irqrestore(vhost->host->host_lock, flags);
- ibmvfc_init_sub_crqs(vhost);
+ ibmvfc_reg_sub_crqs(vhost);
return rc;
}
@@ -955,7 +955,7 @@ static int ibmvfc_reset_crq(struct ibmvf
struct vio_dev *vdev = to_vio_dev(vhost->dev);
struct ibmvfc_queue *crq = &vhost->crq;
- ibmvfc_release_sub_crqs(vhost);
+ ibmvfc_dereg_sub_crqs(vhost);
/* Close the CRQ */
do {
@@ -988,7 +988,7 @@ static int ibmvfc_reset_crq(struct ibmvf
spin_unlock(vhost->crq.q_lock);
spin_unlock_irqrestore(vhost->host->host_lock, flags);
- ibmvfc_init_sub_crqs(vhost);
+ ibmvfc_reg_sub_crqs(vhost);
return rc;
}
@@ -5757,9 +5757,6 @@ static int ibmvfc_register_scsi_channel(
ENTER;
- if (ibmvfc_alloc_queue(vhost, scrq, IBMVFC_SUB_CRQ_FMT))
- return -ENOMEM;
-
rc = h_reg_sub_crq(vdev->unit_address, scrq->msg_token, PAGE_SIZE,
&scrq->cookie, &scrq->hw_irq);
@@ -5799,7 +5796,6 @@ irq_failed:
rc = plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address, scrq->cookie);
} while (rtas_busy_delay(rc));
reg_failed:
- ibmvfc_free_queue(vhost, scrq);
LEAVE;
return rc;
}
@@ -5825,12 +5821,50 @@ static void ibmvfc_deregister_scsi_chann
if (rc)
dev_err(dev, "Failed to free sub-crq[%d]: rc=%ld\n", index, rc);
- ibmvfc_free_queue(vhost, scrq);
+ /* Clean out the queue */
+ memset(scrq->msgs.crq, 0, PAGE_SIZE);
+ scrq->cur = 0;
+
+ LEAVE;
+}
+
+static void ibmvfc_reg_sub_crqs(struct ibmvfc_host *vhost)
+{
+ int i, j;
+
+ ENTER;
+ if (!vhost->mq_enabled || !vhost->scsi_scrqs.scrqs)
+ return;
+
+ for (i = 0; i < nr_scsi_hw_queues; i++) {
+ if (ibmvfc_register_scsi_channel(vhost, i)) {
+ for (j = i; j > 0; j--)
+ ibmvfc_deregister_scsi_channel(vhost, j - 1);
+ vhost->do_enquiry = 0;
+ return;
+ }
+ }
+
+ LEAVE;
+}
+
+static void ibmvfc_dereg_sub_crqs(struct ibmvfc_host *vhost)
+{
+ int i;
+
+ ENTER;
+ if (!vhost->mq_enabled || !vhost->scsi_scrqs.scrqs)
+ return;
+
+ for (i = 0; i < nr_scsi_hw_queues; i++)
+ ibmvfc_deregister_scsi_channel(vhost, i);
+
LEAVE;
}
static void ibmvfc_init_sub_crqs(struct ibmvfc_host *vhost)
{
+ struct ibmvfc_queue *scrq;
int i, j;
ENTER;
@@ -5846,30 +5880,41 @@ static void ibmvfc_init_sub_crqs(struct
}
for (i = 0; i < nr_scsi_hw_queues; i++) {
- if (ibmvfc_register_scsi_channel(vhost, i)) {
- for (j = i; j > 0; j--)
- ibmvfc_deregister_scsi_channel(vhost, j - 1);
+ scrq = &vhost->scsi_scrqs.scrqs[i];
+ if (ibmvfc_alloc_queue(vhost, scrq, IBMVFC_SUB_CRQ_FMT)) {
+ for (j = i; j > 0; j--) {
+ scrq = &vhost->scsi_scrqs.scrqs[j - 1];
+ ibmvfc_free_queue(vhost, scrq);
+ }
kfree(vhost->scsi_scrqs.scrqs);
vhost->scsi_scrqs.scrqs = NULL;
vhost->scsi_scrqs.active_queues = 0;
vhost->do_enquiry = 0;
- break;
+ vhost->mq_enabled = 0;
+ return;
}
}
+ ibmvfc_reg_sub_crqs(vhost);
+
LEAVE;
}
static void ibmvfc_release_sub_crqs(struct ibmvfc_host *vhost)
{
+ struct ibmvfc_queue *scrq;
int i;
ENTER;
if (!vhost->scsi_scrqs.scrqs)
return;
- for (i = 0; i < nr_scsi_hw_queues; i++)
- ibmvfc_deregister_scsi_channel(vhost, i);
+ ibmvfc_dereg_sub_crqs(vhost);
+
+ for (i = 0; i < nr_scsi_hw_queues; i++) {
+ scrq = &vhost->scsi_scrqs.scrqs[i];
+ ibmvfc_free_queue(vhost, scrq);
+ }
kfree(vhost->scsi_scrqs.scrqs);
vhost->scsi_scrqs.scrqs = NULL;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 019/135] mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 018/135] scsi: ibmvfc: Allocate/free queue resource only during probe/remove Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 020/135] mmc: mediatek: wait dma stop bit reset to 0 Greg Kroah-Hartman
` (123 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Chevron Li, Ulf Hansson
From: Chevron Li <chevron.li@bayhubtech.com>
commit e591fcf6b4e39335c9b128b17738fcd2fdd278ae upstream.
The result from ->get_cd() may be incorrect as the card detect debouncing
isn't managed correctly. Let's fix it.
Signed-off-by: Chevron Li<chevron.li@bayhubtech.com>
Fixes: 7d44061704dd ("mmc: sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220602132543.596-1-chevron.li@bayhubtech.com
[Ulf: Updated the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mmc/host/sdhci-pci-o2micro.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -147,6 +147,8 @@ static int sdhci_o2_get_cd(struct mmc_ho
if (!(sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1) & O2_PLL_LOCK_STATUS))
sdhci_o2_enable_internal_clock(host);
+ else
+ sdhci_o2_wait_card_detect_stable(host);
return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 020/135] mmc: mediatek: wait dma stop bit reset to 0
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 019/135] mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 021/135] xen/gntdev: Avoid blocking in unmap_grant_pages() Greg Kroah-Hartman
` (122 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mengqi Zhang, Ulf Hansson
From: Mengqi Zhang <mengqi.zhang@mediatek.com>
commit 89bcd9a64b849380ef57e3032b307574e48db524 upstream.
MediaTek IP requires that after dma stop, it need to wait this dma stop
bit auto-reset to 0. When bus is in high loading state, it will take a
while for the dma stop complete. If there is no waiting operation here,
when program runs to clear fifo and reset, bus will hang.
In addition, there should be no return in msdc_data_xfer_next() if
there is data need be transferred, because no matter what error occurs
here, it should continue to excute to the following mmc_request_done.
Otherwise the core layer may wait complete forever.
Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220609112239.18911-1-mengqi.zhang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mmc/host/mtk-sd.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1355,7 +1355,7 @@ static void msdc_data_xfer_next(struct m
msdc_request_done(host, mrq);
}
-static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
+static void msdc_data_xfer_done(struct msdc_host *host, u32 events,
struct mmc_request *mrq, struct mmc_data *data)
{
struct mmc_command *stop;
@@ -1375,7 +1375,7 @@ static bool msdc_data_xfer_done(struct m
spin_unlock_irqrestore(&host->lock, flags);
if (done)
- return true;
+ return;
stop = data->stop;
if (check_data || (stop && stop->error)) {
@@ -1384,12 +1384,15 @@ static bool msdc_data_xfer_done(struct m
sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP,
1);
+ ret = readl_poll_timeout_atomic(host->base + MSDC_DMA_CTRL, val,
+ !(val & MSDC_DMA_CTRL_STOP), 1, 20000);
+ if (ret)
+ dev_dbg(host->dev, "DMA stop timed out\n");
+
ret = readl_poll_timeout_atomic(host->base + MSDC_DMA_CFG, val,
!(val & MSDC_DMA_CFG_STS), 1, 20000);
- if (ret) {
- dev_dbg(host->dev, "DMA stop timed out\n");
- return false;
- }
+ if (ret)
+ dev_dbg(host->dev, "DMA inactive timed out\n");
sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask);
dev_dbg(host->dev, "DMA stop\n");
@@ -1414,9 +1417,7 @@ static bool msdc_data_xfer_done(struct m
}
msdc_data_xfer_next(host, mrq);
- done = true;
}
- return done;
}
static void msdc_set_buswidth(struct msdc_host *host, u32 width)
@@ -2347,6 +2348,9 @@ static void msdc_cqe_disable(struct mmc_
if (recovery) {
sdr_set_field(host->base + MSDC_DMA_CTRL,
MSDC_DMA_CTRL_STOP, 1);
+ if (WARN_ON(readl_poll_timeout(host->base + MSDC_DMA_CTRL, val,
+ !(val & MSDC_DMA_CTRL_STOP), 1, 3000)))
+ return;
if (WARN_ON(readl_poll_timeout(host->base + MSDC_DMA_CFG, val,
!(val & MSDC_DMA_CFG_STS), 1, 3000)))
return;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 021/135] xen/gntdev: Avoid blocking in unmap_grant_pages()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 020/135] mmc: mediatek: wait dma stop bit reset to 0 Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 022/135] MAINTAINERS: Add new IOMMU development mailing list Greg Kroah-Hartman
` (121 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Demi Marie Obenour, Juergen Gross
From: Demi Marie Obenour <demi@invisiblethingslab.com>
commit dbe97cff7dd9f0f75c524afdd55ad46be3d15295 upstream.
unmap_grant_pages() currently waits for the pages to no longer be used.
In https://github.com/QubesOS/qubes-issues/issues/7481, this lead to a
deadlock against i915: i915 was waiting for gntdev's MMU notifier to
finish, while gntdev was waiting for i915 to free its pages. I also
believe this is responsible for various deadlocks I have experienced in
the past.
Avoid these problems by making unmap_grant_pages async. This requires
making it return void, as any errors will not be available when the
function returns. Fortunately, the only use of the return value is a
WARN_ON(), which can be replaced by a WARN_ON when the error is
detected. Additionally, a failed call will not prevent further calls
from being made, but this is harmless.
Because unmap_grant_pages is now async, the grant handle will be sent to
INVALID_GRANT_HANDLE too late to prevent multiple unmaps of the same
handle. Instead, a separate bool array is allocated for this purpose.
This wastes memory, but stuffing this information in padding bytes is
too fragile. Furthermore, it is necessary to grab a reference to the
map before making the asynchronous call, and release the reference when
the call returns.
It is also necessary to guard against reentrancy in gntdev_map_put(),
and to handle the case where userspace tries to map a mapping whose
contents have not all been freed yet.
Fixes: 745282256c75 ("xen/gntdev: safely unmap grants in case they are still in use")
Cc: stable@vger.kernel.org
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220622022726.2538-1-demi@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/xen/gntdev-common.h | 7 +
drivers/xen/gntdev.c | 157 +++++++++++++++++++++++++++++---------------
2 files changed, 113 insertions(+), 51 deletions(-)
--- a/drivers/xen/gntdev-common.h
+++ b/drivers/xen/gntdev-common.h
@@ -16,6 +16,7 @@
#include <linux/mmu_notifier.h>
#include <linux/types.h>
#include <xen/interface/event_channel.h>
+#include <xen/grant_table.h>
struct gntdev_dmabuf_priv;
@@ -56,6 +57,7 @@ struct gntdev_grant_map {
struct gnttab_unmap_grant_ref *unmap_ops;
struct gnttab_map_grant_ref *kmap_ops;
struct gnttab_unmap_grant_ref *kunmap_ops;
+ bool *being_removed;
struct page **pages;
unsigned long pages_vm_start;
@@ -73,6 +75,11 @@ struct gntdev_grant_map {
/* Needed to avoid allocation in gnttab_dma_free_pages(). */
xen_pfn_t *frames;
#endif
+
+ /* Number of live grants */
+ atomic_t live_grants;
+ /* Needed to avoid allocation in __unmap_grant_pages */
+ struct gntab_unmap_queue_data unmap_data;
};
struct gntdev_grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count,
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -35,6 +35,7 @@
#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/refcount.h>
+#include <linux/workqueue.h>
#include <xen/xen.h>
#include <xen/grant_table.h>
@@ -60,10 +61,11 @@ module_param(limit, uint, 0644);
MODULE_PARM_DESC(limit,
"Maximum number of grants that may be mapped by one mapping request");
+/* True in PV mode, false otherwise */
static int use_ptemod;
-static int unmap_grant_pages(struct gntdev_grant_map *map,
- int offset, int pages);
+static void unmap_grant_pages(struct gntdev_grant_map *map,
+ int offset, int pages);
static struct miscdevice gntdev_miscdev;
@@ -120,6 +122,7 @@ static void gntdev_free_map(struct gntde
kvfree(map->unmap_ops);
kvfree(map->kmap_ops);
kvfree(map->kunmap_ops);
+ kvfree(map->being_removed);
kfree(map);
}
@@ -140,10 +143,13 @@ struct gntdev_grant_map *gntdev_alloc_ma
add->unmap_ops = kvmalloc_array(count, sizeof(add->unmap_ops[0]),
GFP_KERNEL);
add->pages = kvcalloc(count, sizeof(add->pages[0]), GFP_KERNEL);
+ add->being_removed =
+ kvcalloc(count, sizeof(add->being_removed[0]), GFP_KERNEL);
if (NULL == add->grants ||
NULL == add->map_ops ||
NULL == add->unmap_ops ||
- NULL == add->pages)
+ NULL == add->pages ||
+ NULL == add->being_removed)
goto err;
if (use_ptemod) {
add->kmap_ops = kvmalloc_array(count, sizeof(add->kmap_ops[0]),
@@ -250,9 +256,36 @@ void gntdev_put_map(struct gntdev_priv *
if (!refcount_dec_and_test(&map->users))
return;
- if (map->pages && !use_ptemod)
+ if (map->pages && !use_ptemod) {
+ /*
+ * Increment the reference count. This ensures that the
+ * subsequent call to unmap_grant_pages() will not wind up
+ * re-entering itself. It *can* wind up calling
+ * gntdev_put_map() recursively, but such calls will be with a
+ * reference count greater than 1, so they will return before
+ * this code is reached. The recursion depth is thus limited to
+ * 1. Do NOT use refcount_inc() here, as it will detect that
+ * the reference count is zero and WARN().
+ */
+ refcount_set(&map->users, 1);
+
+ /*
+ * Unmap the grants. This may or may not be asynchronous, so it
+ * is possible that the reference count is 1 on return, but it
+ * could also be greater than 1.
+ */
unmap_grant_pages(map, 0, map->count);
+ /* Check if the memory now needs to be freed */
+ if (!refcount_dec_and_test(&map->users))
+ return;
+
+ /*
+ * All pages have been returned to the hypervisor, so free the
+ * map.
+ */
+ }
+
if (map->notify.flags & UNMAP_NOTIFY_SEND_EVENT) {
notify_remote_via_evtchn(map->notify.event);
evtchn_put(map->notify.event);
@@ -283,6 +316,7 @@ static int find_grant_ptes(pte_t *pte, u
int gntdev_map_grant_pages(struct gntdev_grant_map *map)
{
+ size_t alloced = 0;
int i, err = 0;
if (!use_ptemod) {
@@ -331,97 +365,116 @@ int gntdev_map_grant_pages(struct gntdev
map->count);
for (i = 0; i < map->count; i++) {
- if (map->map_ops[i].status == GNTST_okay)
+ if (map->map_ops[i].status == GNTST_okay) {
map->unmap_ops[i].handle = map->map_ops[i].handle;
- else if (!err)
+ if (!use_ptemod)
+ alloced++;
+ } else if (!err)
err = -EINVAL;
if (map->flags & GNTMAP_device_map)
map->unmap_ops[i].dev_bus_addr = map->map_ops[i].dev_bus_addr;
if (use_ptemod) {
- if (map->kmap_ops[i].status == GNTST_okay)
+ if (map->kmap_ops[i].status == GNTST_okay) {
+ if (map->map_ops[i].status == GNTST_okay)
+ alloced++;
map->kunmap_ops[i].handle = map->kmap_ops[i].handle;
- else if (!err)
+ } else if (!err)
err = -EINVAL;
}
}
+ atomic_add(alloced, &map->live_grants);
return err;
}
-static int __unmap_grant_pages(struct gntdev_grant_map *map, int offset,
- int pages)
+static void __unmap_grant_pages_done(int result,
+ struct gntab_unmap_queue_data *data)
{
- int i, err = 0;
- struct gntab_unmap_queue_data unmap_data;
-
- if (map->notify.flags & UNMAP_NOTIFY_CLEAR_BYTE) {
- int pgno = (map->notify.addr >> PAGE_SHIFT);
- if (pgno >= offset && pgno < offset + pages) {
- /* No need for kmap, pages are in lowmem */
- uint8_t *tmp = pfn_to_kaddr(page_to_pfn(map->pages[pgno]));
- tmp[map->notify.addr & (PAGE_SIZE-1)] = 0;
- map->notify.flags &= ~UNMAP_NOTIFY_CLEAR_BYTE;
- }
- }
-
- unmap_data.unmap_ops = map->unmap_ops + offset;
- unmap_data.kunmap_ops = use_ptemod ? map->kunmap_ops + offset : NULL;
- unmap_data.pages = map->pages + offset;
- unmap_data.count = pages;
-
- err = gnttab_unmap_refs_sync(&unmap_data);
- if (err)
- return err;
+ unsigned int i;
+ struct gntdev_grant_map *map = data->data;
+ unsigned int offset = data->unmap_ops - map->unmap_ops;
- for (i = 0; i < pages; i++) {
- if (map->unmap_ops[offset+i].status)
- err = -EINVAL;
+ for (i = 0; i < data->count; i++) {
+ WARN_ON(map->unmap_ops[offset+i].status);
pr_debug("unmap handle=%d st=%d\n",
map->unmap_ops[offset+i].handle,
map->unmap_ops[offset+i].status);
map->unmap_ops[offset+i].handle = INVALID_GRANT_HANDLE;
if (use_ptemod) {
- if (map->kunmap_ops[offset+i].status)
- err = -EINVAL;
+ WARN_ON(map->kunmap_ops[offset+i].status);
pr_debug("kunmap handle=%u st=%d\n",
map->kunmap_ops[offset+i].handle,
map->kunmap_ops[offset+i].status);
map->kunmap_ops[offset+i].handle = INVALID_GRANT_HANDLE;
}
}
- return err;
+ /*
+ * Decrease the live-grant counter. This must happen after the loop to
+ * prevent premature reuse of the grants by gnttab_mmap().
+ */
+ atomic_sub(data->count, &map->live_grants);
+
+ /* Release reference taken by __unmap_grant_pages */
+ gntdev_put_map(NULL, map);
}
-static int unmap_grant_pages(struct gntdev_grant_map *map, int offset,
- int pages)
+static void __unmap_grant_pages(struct gntdev_grant_map *map, int offset,
+ int pages)
{
- int range, err = 0;
+ if (map->notify.flags & UNMAP_NOTIFY_CLEAR_BYTE) {
+ int pgno = (map->notify.addr >> PAGE_SHIFT);
+
+ if (pgno >= offset && pgno < offset + pages) {
+ /* No need for kmap, pages are in lowmem */
+ uint8_t *tmp = pfn_to_kaddr(page_to_pfn(map->pages[pgno]));
+
+ tmp[map->notify.addr & (PAGE_SIZE-1)] = 0;
+ map->notify.flags &= ~UNMAP_NOTIFY_CLEAR_BYTE;
+ }
+ }
+
+ map->unmap_data.unmap_ops = map->unmap_ops + offset;
+ map->unmap_data.kunmap_ops = use_ptemod ? map->kunmap_ops + offset : NULL;
+ map->unmap_data.pages = map->pages + offset;
+ map->unmap_data.count = pages;
+ map->unmap_data.done = __unmap_grant_pages_done;
+ map->unmap_data.data = map;
+ refcount_inc(&map->users); /* to keep map alive during async call below */
+
+ gnttab_unmap_refs_async(&map->unmap_data);
+}
+
+static void unmap_grant_pages(struct gntdev_grant_map *map, int offset,
+ int pages)
+{
+ int range;
+
+ if (atomic_read(&map->live_grants) == 0)
+ return; /* Nothing to do */
pr_debug("unmap %d+%d [%d+%d]\n", map->index, map->count, offset, pages);
/* It is possible the requested range will have a "hole" where we
* already unmapped some of the grants. Only unmap valid ranges.
*/
- while (pages && !err) {
- while (pages &&
- map->unmap_ops[offset].handle == INVALID_GRANT_HANDLE) {
+ while (pages) {
+ while (pages && map->being_removed[offset]) {
offset++;
pages--;
}
range = 0;
while (range < pages) {
- if (map->unmap_ops[offset + range].handle ==
- INVALID_GRANT_HANDLE)
+ if (map->being_removed[offset + range])
break;
+ map->being_removed[offset + range] = true;
range++;
}
- err = __unmap_grant_pages(map, offset, range);
+ if (range)
+ __unmap_grant_pages(map, offset, range);
offset += range;
pages -= range;
}
-
- return err;
}
/* ------------------------------------------------------------------ */
@@ -473,7 +526,6 @@ static bool gntdev_invalidate(struct mmu
struct gntdev_grant_map *map =
container_of(mn, struct gntdev_grant_map, notifier);
unsigned long mstart, mend;
- int err;
if (!mmu_notifier_range_blockable(range))
return false;
@@ -494,10 +546,9 @@ static bool gntdev_invalidate(struct mmu
map->index, map->count,
map->vma->vm_start, map->vma->vm_end,
range->start, range->end, mstart, mend);
- err = unmap_grant_pages(map,
+ unmap_grant_pages(map,
(mstart - map->vma->vm_start) >> PAGE_SHIFT,
(mend - mstart) >> PAGE_SHIFT);
- WARN_ON(err);
return true;
}
@@ -985,6 +1036,10 @@ static int gntdev_mmap(struct file *flip
goto unlock_out;
if (use_ptemod && map->vma)
goto unlock_out;
+ if (atomic_read(&map->live_grants)) {
+ err = -EAGAIN;
+ goto unlock_out;
+ }
refcount_inc(&map->users);
vma->vm_ops = &gntdev_vmops;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 022/135] MAINTAINERS: Add new IOMMU development mailing list
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 021/135] xen/gntdev: Avoid blocking in unmap_grant_pages() Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 023/135] mtd: rawnand: gpmi: Fix setting busy timeout setting Greg Kroah-Hartman
` (120 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Joerg Roedel
From: Joerg Roedel <jroedel@suse.de>
commit c242507c1b895646b4a25060df13b6214805759f upstream.
The IOMMU mailing list will move from lists.linux-foundation.org to
lists.linux.dev. The hard switch of the archive will happen on July
5th, but add the new list now already so that people start using the
list when sending patches. After July 5th the old list will disappear.
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220624125139.412-1-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
MAINTAINERS | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -434,6 +434,7 @@ ACPI VIOT DRIVER
M: Jean-Philippe Brucker <jean-philippe@linaro.org>
L: linux-acpi@vger.kernel.org
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Maintained
F: drivers/acpi/viot.c
F: include/linux/acpi_viot.h
@@ -941,6 +942,7 @@ AMD IOMMU (AMD-VI)
M: Joerg Roedel <joro@8bytes.org>
R: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
F: drivers/iommu/amd/
@@ -5602,6 +5604,7 @@ M: Christoph Hellwig <hch@lst.de>
M: Marek Szyprowski <m.szyprowski@samsung.com>
R: Robin Murphy <robin.murphy@arm.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Supported
W: http://git.infradead.org/users/hch/dma-mapping.git
T: git git://git.infradead.org/users/hch/dma-mapping.git
@@ -5614,6 +5617,7 @@ F: kernel/dma/
DMA MAPPING BENCHMARK
M: Barry Song <song.bao.hua@hisilicon.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
F: kernel/dma/map_benchmark.c
F: tools/testing/selftests/dma/
@@ -7115,6 +7119,7 @@ F: drivers/gpu/drm/exynos/exynos_dp*
EXYNOS SYSMMU (IOMMU) driver
M: Marek Szyprowski <m.szyprowski@samsung.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Maintained
F: drivers/iommu/exynos-iommu.c
@@ -9457,6 +9462,7 @@ INTEL IOMMU (VT-d)
M: David Woodhouse <dwmw2@infradead.org>
M: Lu Baolu <baolu.lu@linux.intel.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
F: drivers/iommu/intel/
@@ -9793,6 +9799,7 @@ IOMMU DRIVERS
M: Joerg Roedel <joro@8bytes.org>
M: Will Deacon <will@kernel.org>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
F: Documentation/devicetree/bindings/iommu/
@@ -11795,6 +11802,7 @@ F: drivers/i2c/busses/i2c-mt65xx.c
MEDIATEK IOMMU DRIVER
M: Yong Wu <yong.wu@mediatek.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: Documentation/devicetree/bindings/iommu/mediatek*
@@ -15554,6 +15562,7 @@ F: drivers/i2c/busses/i2c-qcom-cci.c
QUALCOMM IOMMU
M: Rob Clark <robdclark@gmail.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
L: linux-arm-msm@vger.kernel.org
S: Maintained
F: drivers/iommu/arm/arm-smmu/qcom_iommu.c
@@ -17982,6 +17991,7 @@ F: arch/x86/boot/video*
SWIOTLB SUBSYSTEM
M: Christoph Hellwig <hch@infradead.org>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Supported
W: http://git.infradead.org/users/hch/dma-mapping.git
T: git git://git.infradead.org/users/hch/dma-mapping.git
@@ -20562,6 +20572,7 @@ M: Juergen Gross <jgross@suse.com>
M: Stefano Stabellini <sstabellini@kernel.org>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Supported
F: arch/x86/xen/*swiotlb*
F: drivers/xen/*swiotlb*
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 023/135] mtd: rawnand: gpmi: Fix setting busy timeout setting
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 022/135] MAINTAINERS: Add new IOMMU development mailing list Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 024/135] ata: libata: add qc->flags in ata_qc_complete_template tracepoint Greg Kroah-Hartman
` (119 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sascha Hauer, Miquel Raynal
From: Sascha Hauer <s.hauer@pengutronix.de>
commit 06781a5026350cde699d2d10c9914a25c1524f45 upstream.
The DEVICE_BUSY_TIMEOUT value is described in the Reference Manual as:
| Timeout waiting for NAND Ready/Busy or ATA IRQ. Used in WAIT_FOR_READY
| mode. This value is the number of GPMI_CLK cycles multiplied by 4096.
So instead of multiplying the value in cycles with 4096, we have to
divide it by that value. Use DIV_ROUND_UP to make sure we are on the
safe side, especially when the calculated value in cycles is smaller
than 4096 as typically the case.
This bug likely never triggered because any timeout != 0 usually will
do. In my case the busy timeout in cycles was originally calculated as
2408, which multiplied with 4096 is 0x968000. The lower 16 bits were
taken for the 16 bit wide register field, so the register value was
0x8000. With 2970bf5a32f0 ("mtd: rawnand: gpmi: fix controller timings
setting") however the value in cycles became 2384, which multiplied
with 4096 is 0x950000. The lower 16 bit are 0x0 now resulting in an
intermediate timeout when reading from NAND.
Fixes: b1206122069aa ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220614083138.3455683-1-s.hauer@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -685,7 +685,7 @@ static void gpmi_nfc_compute_timings(str
hw->timing0 = BF_GPMI_TIMING0_ADDRESS_SETUP(addr_setup_cycles) |
BF_GPMI_TIMING0_DATA_HOLD(data_hold_cycles) |
BF_GPMI_TIMING0_DATA_SETUP(data_setup_cycles);
- hw->timing1 = BF_GPMI_TIMING1_BUSY_TIMEOUT(busy_timeout_cycles * 4096);
+ hw->timing1 = BF_GPMI_TIMING1_BUSY_TIMEOUT(DIV_ROUND_UP(busy_timeout_cycles, 4096));
/*
* Derive NFC ideal delay from {3}:
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 024/135] ata: libata: add qc->flags in ata_qc_complete_template tracepoint
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 023/135] mtd: rawnand: gpmi: Fix setting busy timeout setting Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 025/135] dm era: commit metadata in postsuspend after worker stops Greg Kroah-Hartman
` (118 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Edward Wu, Damien Le Moal
From: Edward Wu <edwardwu@realtek.com>
commit 540a92bfe6dab7310b9df2e488ba247d784d0163 upstream.
Add flags value to check the result of ata completion
Fixes: 255c03d15a29 ("libata: Add tracepoints")
Cc: stable@vger.kernel.org
Signed-off-by: Edward Wu <edwardwu@realtek.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/trace/events/libata.h | 1 +
1 file changed, 1 insertion(+)
--- a/include/trace/events/libata.h
+++ b/include/trace/events/libata.h
@@ -249,6 +249,7 @@ DECLARE_EVENT_CLASS(ata_qc_complete_temp
__entry->hob_feature = qc->result_tf.hob_feature;
__entry->nsect = qc->result_tf.nsect;
__entry->hob_nsect = qc->result_tf.hob_nsect;
+ __entry->flags = qc->flags;
),
TP_printk("ata_port=%u ata_dev=%u tag=%d flags=%s status=%s " \
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 025/135] dm era: commit metadata in postsuspend after worker stops
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 024/135] ata: libata: add qc->flags in ata_qc_complete_template tracepoint Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 026/135] dm mirror log: clear log bits up to BITS_PER_LONG boundary Greg Kroah-Hartman
` (117 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Nikos Tsironis, Mike Snitzer
From: Nikos Tsironis <ntsironis@arrikto.com>
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-era-target.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/md/dm-era-target.c
+++ b/drivers/md/dm-era-target.c
@@ -1400,7 +1400,7 @@ static void start_worker(struct era *era
static void stop_worker(struct era *era)
{
atomic_set(&era->suspended, 1);
- flush_workqueue(era->wq);
+ drain_workqueue(era->wq);
}
/*----------------------------------------------------------------
@@ -1570,6 +1570,12 @@ static void era_postsuspend(struct dm_ta
}
stop_worker(era);
+
+ r = metadata_commit(era->md);
+ if (r) {
+ DMERR("%s: metadata_commit failed", __func__);
+ /* FIXME: fail mode */
+ }
}
static int era_preresume(struct dm_target *ti)
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 026/135] dm mirror log: clear log bits up to BITS_PER_LONG boundary
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 025/135] dm era: commit metadata in postsuspend after worker stops Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 027/135] tracing/kprobes: Check whether get_kretprobe() returns NULL in kretprobe_dispatcher() Greg Kroah-Hartman
` (116 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Benjamin Marzinski, Mikulas Patocka,
Mike Snitzer
From: Mikulas Patocka <mpatocka@redhat.com>
commit 90736eb3232d208ee048493f371075e4272e0944 upstream.
Commit 85e123c27d5c ("dm mirror log: round up region bitmap size to
BITS_PER_LONG") introduced a regression on 64-bit architectures in the
lvm testsuite tests: lvcreate-mirror, mirror-names and vgsplit-operation.
If the device is shrunk, we need to clear log bits beyond the end of the
device. The code clears bits up to a 32-bit boundary and then calculates
lc->sync_count by summing set bits up to a 64-bit boundary (the commit
changed that; previously, this boundary was 32-bit too). So, it was using
some non-zeroed bits in the calculation and this caused misbehavior.
Fix this regression by clearing bits up to BITS_PER_LONG boundary.
Fixes: 85e123c27d5c ("dm mirror log: round up region bitmap size to BITS_PER_LONG")
Cc: stable@vger.kernel.org
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-log.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/dm-log.c
+++ b/drivers/md/dm-log.c
@@ -615,7 +615,7 @@ static int disk_resume(struct dm_dirty_l
log_clear_bit(lc, lc->clean_bits, i);
/* clear any old bits -- device has shrunk */
- for (i = lc->region_count; i % (sizeof(*lc->clean_bits) << BYTE_SHIFT); i++)
+ for (i = lc->region_count; i % BITS_PER_LONG; i++)
log_clear_bit(lc, lc->clean_bits, i);
/* copy clean across to sync */
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 027/135] tracing/kprobes: Check whether get_kretprobe() returns NULL in kretprobe_dispatcher()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 026/135] dm mirror log: clear log bits up to BITS_PER_LONG boundary Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 028/135] drm/i915: Implement w/a 22010492432 for adl-s Greg Kroah-Hartman
` (115 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yonghong Song, Peter Zijlstra,
Ingo Molnar, bpf, Kernel Team, Masami Hiramatsu (Google),
Jiri Olsa, Steven Rostedt (Google)
From: Masami Hiramatsu (Google) <mhiramat@kernel.org>
commit cc72b72073ac982a954d3b43519ca1c28f03c27c upstream.
There is a small chance that get_kretprobe(ri) returns NULL in
kretprobe_dispatcher() when another CPU unregisters the kretprobe
right after __kretprobe_trampoline_handler().
To avoid this issue, kretprobe_dispatcher() checks the get_kretprobe()
return value again. And if it is NULL, it returns soon because that
kretprobe is under unregistering process.
This issue has been introduced when the kretprobe is decoupled
from the struct kretprobe_instance by commit d741bf41d7c7
("kprobes: Remove kretprobe hash"). Before that commit, the
struct kretprob_instance::rp directly points the kretprobe
and it is never be NULL.
Link: https://lkml.kernel.org/r/165366693881.797669.16926184644089588731.stgit@devnote2
Reported-by: Yonghong Song <yhs@fb.com>
Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash")
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: bpf <bpf@vger.kernel.org>
Cc: Kernel Team <kernel-team@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/trace_kprobe.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -1733,8 +1733,17 @@ static int
kretprobe_dispatcher(struct kretprobe_instance *ri, struct pt_regs *regs)
{
struct kretprobe *rp = get_kretprobe(ri);
- struct trace_kprobe *tk = container_of(rp, struct trace_kprobe, rp);
+ struct trace_kprobe *tk;
+ /*
+ * There is a small chance that get_kretprobe(ri) returns NULL when
+ * the kretprobe is unregister on another CPU between kretprobe's
+ * trampoline_handler and this function.
+ */
+ if (unlikely(!rp))
+ return 0;
+
+ tk = container_of(rp, struct trace_kprobe, rp);
raw_cpu_inc(*tk->nhit);
if (trace_probe_test_flag(&tk->tp, TP_FLAG_TRACE))
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 028/135] drm/i915: Implement w/a 22010492432 for adl-s
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 027/135] tracing/kprobes: Check whether get_kretprobe() returns NULL in kretprobe_dispatcher() Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 029/135] USB: serial: pl2303: add support for more HXN (G) types Greg Kroah-Hartman
` (114 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ville Syrjälä,
Matt Roper, Jani Nikula
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
commit 13bd259b64bb58ae130923ada42ebc19bf3f2fa2 upstream.
adl-s needs the combo PLL DCO fraction w/a as well.
Gets us slightly more accurate clock out of the PLL.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613201439.23341-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit d36bdd77b9e6aa7f5cb7b0f11ebbab8e5febf10b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -2434,7 +2434,7 @@ static void icl_wrpll_params_populate(st
}
/*
- * Display WA #22010492432: ehl, tgl, adl-p
+ * Display WA #22010492432: ehl, tgl, adl-s, adl-p
* Program half of the nominal DCO divider fraction value.
*/
static bool
@@ -2442,7 +2442,7 @@ ehl_combo_pll_div_frac_wa_needed(struct
{
return ((IS_PLATFORM(i915, INTEL_ELKHARTLAKE) &&
IS_JSL_EHL_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) ||
- IS_TIGERLAKE(i915) || IS_ALDERLAKE_P(i915)) &&
+ IS_TIGERLAKE(i915) || IS_ALDERLAKE_S(i915) || IS_ALDERLAKE_P(i915)) &&
i915->dpll.ref_clks.nssc == 38400;
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 029/135] USB: serial: pl2303: add support for more HXN (G) types
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 028/135] drm/i915: Implement w/a 22010492432 for adl-s Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 030/135] USB: serial: option: add Telit LE910Cx 0x1250 composition Greg Kroah-Hartman
` (113 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Charles Yeh, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit ae60aac59a9ad8ab64a4b07de509a534a75b6bac upstream.
Add support for further HXN (G) type devices (GT variant, GL variant, GS
variant and GR) and document the bcdDevice mapping.
Note that the TA and TB types use the same bcdDevice as some GT and GE
variants, respectively, but that the HX status request can be used to
determine which is which.
Also note that we currently do not distinguish between the various HXN
(G) types in the driver but that this may change eventually (e.g. when
adding GPIO support).
Reported-by: Charles Yeh <charlesyeh522@gmail.com>
Link: https://lore.kernel.org/r/YrF77b9DdeumUAee@hovoldconsulting.com
Cc: stable@vger.kernel.org # 5.13
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/pl2303.c | 29 +++++++++++++++++------------
1 file changed, 17 insertions(+), 12 deletions(-)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -436,22 +436,27 @@ static int pl2303_detect_type(struct usb
break;
case 0x200:
switch (bcdDevice) {
- case 0x100:
+ case 0x100: /* GC */
case 0x105:
+ return TYPE_HXN;
+ case 0x300: /* GT / TA */
+ if (pl2303_supports_hx_status(serial))
+ return TYPE_TA;
+ fallthrough;
case 0x305:
+ case 0x400: /* GL */
case 0x405:
+ return TYPE_HXN;
+ case 0x500: /* GE / TB */
+ if (pl2303_supports_hx_status(serial))
+ return TYPE_TB;
+ fallthrough;
+ case 0x505:
+ case 0x600: /* GS */
case 0x605:
- /*
- * Assume it's an HXN-type if the device doesn't
- * support the old read request value.
- */
- if (!pl2303_supports_hx_status(serial))
- return TYPE_HXN;
- break;
- case 0x300:
- return TYPE_TA;
- case 0x500:
- return TYPE_TB;
+ case 0x700: /* GR */
+ case 0x705:
+ return TYPE_HXN;
}
break;
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 030/135] USB: serial: option: add Telit LE910Cx 0x1250 composition
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 029/135] USB: serial: pl2303: add support for more HXN (G) types Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 031/135] USB: serial: option: add Quectel EM05-G modem Greg Kroah-Hartman
` (112 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniele Palmas, Carlo Lobrano, Johan Hovold
From: Carlo Lobrano <c.lobrano@gmail.com>
commit 342fc0c3b345525da21112bd0478a0dc741598ea upstream.
Add support for the following Telit LE910Cx composition:
0x1250: rmnet, tty, tty, tty, tty
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Link: https://lore.kernel.org/r/20220614075623.2392607-1-c.lobrano@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1279,6 +1279,7 @@ static const struct usb_device_id option
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1231, 0xff), /* Telit LE910Cx (RNDIS) */
.driver_info = NCTRL(2) | RSVD(3) },
+ { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x1250, 0xff, 0x00, 0x00) }, /* Telit LE910Cx (rmnet) */
{ USB_DEVICE(TELIT_VENDOR_ID, 0x1260),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x1261),
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 031/135] USB: serial: option: add Quectel EM05-G modem
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 030/135] USB: serial: option: add Telit LE910Cx 0x1250 composition Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 032/135] USB: serial: option: add Quectel RM500K module support Greg Kroah-Hartman
` (111 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Yonglin Tan, Johan Hovold
From: Yonglin Tan <yonglin.tan@outlook.com>
commit 33b29dbb39bcbd0a96e440646396bbf670b914fa upstream.
The EM05-G modem has 2 USB configurations that are configurable via the AT
command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with
the following interfaces, respectively:
"RMNET" : AT + DIAG + NMEA + Modem + QMI
"MBIM" : MBIM + AT + DIAG + NMEA + Modem
The detailed description of the USB configuration for each mode as follows:
RMNET Mode
--------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=030a Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
MBIM Mode
--------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=030a Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-G
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -252,6 +252,7 @@ static void option_instat_callback(struc
#define QUECTEL_PRODUCT_EG95 0x0195
#define QUECTEL_PRODUCT_BG96 0x0296
#define QUECTEL_PRODUCT_EP06 0x0306
+#define QUECTEL_PRODUCT_EM05G 0x030a
#define QUECTEL_PRODUCT_EM12 0x0512
#define QUECTEL_PRODUCT_RM500Q 0x0800
#define QUECTEL_PRODUCT_EC200S_CN 0x6002
@@ -1134,6 +1135,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
+ .driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 032/135] USB: serial: option: add Quectel RM500K module support
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 031/135] USB: serial: option: add Quectel EM05-G modem Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 033/135] drm/msm: Ensure mmap offset is initialized Greg Kroah-Hartman
` (110 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ballon Shi, Macpaul Lin, Johan Hovold
From: Macpaul Lin <macpaul.lin@mediatek.com>
commit 15b694e96c31807d8515aacfa687a1e8a4fbbadc upstream.
Add usb product id of the Quectel RM500K module.
RM500K provides 2 mandatory interfaces to Linux host after enumeration.
- /dev/ttyUSB5: this is a serial interface for control path. User needs
to write AT commands to this device node to query status, set APN,
set PIN code, and enable/disable the data connection to 5G network.
- ethX: this is the data path provided as a RNDIS devices. After the
data connection has been established, Linux host can access 5G data
network via this interface.
"RNDIS": RNDIS + ADB + AT (/dev/ttyUSB5) + MODEM COMs
usb-devices output for 0x7001:
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=7001 Rev=00.01
S: Manufacturer=MediaTek Inc.
S: Product=USB DATA CARD
S: SerialNumber=869206050009672
C: #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Co-developed-by: Ballon Shi <ballon.shi@quectel.com>
Signed-off-by: Ballon Shi <ballon.shi@quectel.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -257,6 +257,7 @@ static void option_instat_callback(struc
#define QUECTEL_PRODUCT_RM500Q 0x0800
#define QUECTEL_PRODUCT_EC200S_CN 0x6002
#define QUECTEL_PRODUCT_EC200T 0x6026
+#define QUECTEL_PRODUCT_RM500K 0x7001
#define CMOTECH_VENDOR_ID 0x16d8
#define CMOTECH_PRODUCT_6001 0x6001
@@ -1150,6 +1151,7 @@ static const struct usb_device_id option
.driver_info = ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 033/135] drm/msm: Ensure mmap offset is initialized
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 032/135] USB: serial: option: add Quectel RM500K module support Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 034/135] drm/msm: Fix double pm_runtime_disable() call Greg Kroah-Hartman
` (109 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rob Clark, Dmitry Baryshkov, Sasha Levin
From: Rob Clark <robdclark@chromium.org>
[ Upstream commit 036d20726c30267724416e966c9f92db07de8081 ]
If a GEM object is allocated, and then exported as a dma-buf fd which is
mmap'd before or without the GEM buffer being directly mmap'd, the
vma_node could be unitialized. This leads to a situation where the CPU
mapping is not correctly torn down in drm_vma_node_unmap().
Fixes: e5516553999f ("drm: call drm_gem_object_funcs.mmap with fake offset")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220531200857.136547-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/msm_drv.c | 2 +-
drivers/gpu/drm/msm/msm_drv.h | 1 +
drivers/gpu/drm/msm/msm_gem_prime.c | 15 +++++++++++++++
3 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index 9712582886aa..916361c30d77 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1102,7 +1102,7 @@ static const struct drm_driver msm_driver = {
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
.gem_prime_import_sg_table = msm_gem_prime_import_sg_table,
- .gem_prime_mmap = drm_gem_prime_mmap,
+ .gem_prime_mmap = msm_gem_prime_mmap,
#ifdef CONFIG_DEBUG_FS
.debugfs_init = msm_debugfs_init,
#endif
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index c552f0c3890c..bd5132bb9bde 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -298,6 +298,7 @@ unsigned long msm_gem_shrinker_shrink(struct drm_device *dev, unsigned long nr_t
void msm_gem_shrinker_init(struct drm_device *dev);
void msm_gem_shrinker_cleanup(struct drm_device *dev);
+int msm_gem_prime_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma);
struct sg_table *msm_gem_prime_get_sg_table(struct drm_gem_object *obj);
int msm_gem_prime_vmap(struct drm_gem_object *obj, struct dma_buf_map *map);
void msm_gem_prime_vunmap(struct drm_gem_object *obj, struct dma_buf_map *map);
diff --git a/drivers/gpu/drm/msm/msm_gem_prime.c b/drivers/gpu/drm/msm/msm_gem_prime.c
index 8a2d94bd5df2..02c70a0b2a03 100644
--- a/drivers/gpu/drm/msm/msm_gem_prime.c
+++ b/drivers/gpu/drm/msm/msm_gem_prime.c
@@ -11,6 +11,21 @@
#include "msm_drv.h"
#include "msm_gem.h"
+int msm_gem_prime_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma)
+{
+ int ret;
+
+ /* Ensure the mmap offset is initialized. We lazily initialize it,
+ * so if it has not been first mmap'd directly as a GEM object, the
+ * mmap offset will not be already initialized.
+ */
+ ret = drm_gem_create_mmap_offset(obj);
+ if (ret)
+ return ret;
+
+ return drm_gem_prime_mmap(obj, vma);
+}
+
struct sg_table *msm_gem_prime_get_sg_table(struct drm_gem_object *obj)
{
struct msm_gem_object *msm_obj = to_msm_bo(obj);
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 034/135] drm/msm: Fix double pm_runtime_disable() call
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 033/135] drm/msm: Ensure mmap offset is initialized Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 035/135] netfilter: use get_random_u32 instead of prandom Greg Kroah-Hartman
` (108 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maximilian Luz, Bjorn Andersson,
Rob Clark, Rob Clark, Sasha Levin
From: Maximilian Luz <luzmaximilian@gmail.com>
[ Upstream commit ce0db505bc0c51ef5e9ba446c660de7e26f78f29 ]
Following commit 17e822f7591f ("drm/msm: fix unbalanced
pm_runtime_enable in adreno_gpu_{init, cleanup}"), any call to
adreno_unbind() will disable runtime PM twice, as indicated by the call
trees below:
adreno_unbind()
-> pm_runtime_force_suspend()
-> pm_runtime_disable()
adreno_unbind()
-> gpu->funcs->destroy() [= aNxx_destroy()]
-> adreno_gpu_cleanup()
-> pm_runtime_disable()
Note that pm_runtime_force_suspend() is called right before
gpu->funcs->destroy() and both functions are called unconditionally.
With recent addition of the eDP AUX bus code, this problem manifests
itself when the eDP panel cannot be found yet and probing is deferred.
On the first probe attempt, we disable runtime PM twice as described
above. This then causes any later probe attempt to fail with
[drm:adreno_load_gpu [msm]] *ERROR* Couldn't power up the GPU: -13
preventing the driver from loading.
As there seem to be scenarios where the aNxx_destroy() functions are not
called from adreno_unbind(), simply removing pm_runtime_disable() from
inside adreno_unbind() does not seem to be the proper fix. This is what
commit 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in
adreno_gpu_{init, cleanup}") intended to fix. Therefore, instead check
whether runtime PM is still enabled, and only disable it in that case.
Fixes: 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/20220606211305.189585-1-luzmaximilian@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 748665232d29..bba68776cb25 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -958,7 +958,8 @@ void adreno_gpu_cleanup(struct adreno_gpu *adreno_gpu)
for (i = 0; i < ARRAY_SIZE(adreno_gpu->info->fw); i++)
release_firmware(adreno_gpu->fw[i]);
- pm_runtime_disable(&priv->gpu_pdev->dev);
+ if (pm_runtime_enabled(&priv->gpu_pdev->dev))
+ pm_runtime_disable(&priv->gpu_pdev->dev);
msm_gpu_cleanup(&adreno_gpu->base);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 035/135] netfilter: use get_random_u32 instead of prandom
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 034/135] drm/msm: Fix double pm_runtime_disable() call Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 036/135] scsi: scsi_debug: Fix zone transition to full condition Greg Kroah-Hartman
` (107 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Westphal, Pablo Neira Ayuso,
Sasha Levin
From: Florian Westphal <fw@strlen.de>
[ Upstream commit b1fd94e704571f98b21027340eecf821b2bdffba ]
bh might occur while updating per-cpu rnd_state from user context,
ie. local_out path.
BUG: using smp_processor_id() in preemptible [00000000] code: nginx/2725
caller is nft_ng_random_eval+0x24/0x54 [nft_numgen]
Call Trace:
check_preemption_disabled+0xde/0xe0
nft_ng_random_eval+0x24/0x54 [nft_numgen]
Use the random driver instead, this also avoids need for local prandom
state. Moreover, prandom now uses the random driver since d4150779e60f
("random32: use real rng for non-deterministic randomness").
Based on earlier patch from Pablo Neira.
Fixes: 6b2faee0ca91 ("netfilter: nft_meta: place prandom handling in a helper")
Fixes: 978d8f9055c3 ("netfilter: nft_numgen: add map lookups for numgen random operations")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nft_meta.c | 13 ++-----------
net/netfilter/nft_numgen.c | 12 +++---------
2 files changed, 5 insertions(+), 20 deletions(-)
diff --git a/net/netfilter/nft_meta.c b/net/netfilter/nft_meta.c
index a7e01e9952f1..44d9b38e5f90 100644
--- a/net/netfilter/nft_meta.c
+++ b/net/netfilter/nft_meta.c
@@ -14,6 +14,7 @@
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
+#include <linux/random.h>
#include <linux/smp.h>
#include <linux/static_key.h>
#include <net/dst.h>
@@ -32,8 +33,6 @@
#define NFT_META_SECS_PER_DAY 86400
#define NFT_META_DAYS_PER_WEEK 7
-static DEFINE_PER_CPU(struct rnd_state, nft_prandom_state);
-
static u8 nft_meta_weekday(void)
{
time64_t secs = ktime_get_real_seconds();
@@ -267,13 +266,6 @@ static bool nft_meta_get_eval_ifname(enum nft_meta_keys key, u32 *dest,
return true;
}
-static noinline u32 nft_prandom_u32(void)
-{
- struct rnd_state *state = this_cpu_ptr(&nft_prandom_state);
-
- return prandom_u32_state(state);
-}
-
#ifdef CONFIG_IP_ROUTE_CLASSID
static noinline bool
nft_meta_get_eval_rtclassid(const struct sk_buff *skb, u32 *dest)
@@ -385,7 +377,7 @@ void nft_meta_get_eval(const struct nft_expr *expr,
break;
#endif
case NFT_META_PRANDOM:
- *dest = nft_prandom_u32();
+ *dest = get_random_u32();
break;
#ifdef CONFIG_XFRM
case NFT_META_SECPATH:
@@ -514,7 +506,6 @@ int nft_meta_get_init(const struct nft_ctx *ctx,
len = IFNAMSIZ;
break;
case NFT_META_PRANDOM:
- prandom_init_once(&nft_prandom_state);
len = sizeof(u32);
break;
#ifdef CONFIG_XFRM
diff --git a/net/netfilter/nft_numgen.c b/net/netfilter/nft_numgen.c
index 722cac1e90e0..4e43214e88de 100644
--- a/net/netfilter/nft_numgen.c
+++ b/net/netfilter/nft_numgen.c
@@ -9,12 +9,11 @@
#include <linux/netlink.h>
#include <linux/netfilter.h>
#include <linux/netfilter/nf_tables.h>
+#include <linux/random.h>
#include <linux/static_key.h>
#include <net/netfilter/nf_tables.h>
#include <net/netfilter/nf_tables_core.h>
-static DEFINE_PER_CPU(struct rnd_state, nft_numgen_prandom_state);
-
struct nft_ng_inc {
u8 dreg;
u32 modulus;
@@ -104,12 +103,9 @@ struct nft_ng_random {
u32 offset;
};
-static u32 nft_ng_random_gen(struct nft_ng_random *priv)
+static u32 nft_ng_random_gen(const struct nft_ng_random *priv)
{
- struct rnd_state *state = this_cpu_ptr(&nft_numgen_prandom_state);
-
- return reciprocal_scale(prandom_u32_state(state), priv->modulus) +
- priv->offset;
+ return reciprocal_scale(get_random_u32(), priv->modulus) + priv->offset;
}
static void nft_ng_random_eval(const struct nft_expr *expr,
@@ -137,8 +133,6 @@ static int nft_ng_random_init(const struct nft_ctx *ctx,
if (priv->offset + priv->modulus - 1 < priv->offset)
return -EOVERFLOW;
- prandom_init_once(&nft_numgen_prandom_state);
-
return nft_parse_register_store(ctx, tb[NFTA_NG_DREG], &priv->dreg,
NULL, NFT_DATA_VALUE, sizeof(u32));
}
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 036/135] scsi: scsi_debug: Fix zone transition to full condition
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 035/135] netfilter: use get_random_u32 instead of prandom Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 037/135] drm/msm: Switch ordering of runpm put vs devfreq_idle Greg Kroah-Hartman
` (106 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Niklas Cassel, Douglas Gilbert,
Damien Le Moal, Martin K. Petersen, Sasha Levin
From: Damien Le Moal <damien.lemoal@opensource.wdc.com>
[ Upstream commit 566d3c57eb526f32951af15866086e236ce1fc8a ]
When a write command to a sequential write required or sequential write
preferred zone result in the zone write pointer reaching the end of the
zone, the zone condition must be set to full AND the number of implicitly
or explicitly open zones updated to have a correct accounting for zone
resources. However, the function zbc_inc_wp() only sets the zone condition
to full without updating the open zone counters, resulting in a zone state
machine breakage.
Introduce the helper function zbc_set_zone_full() and use it in
zbc_inc_wp() to correctly transition zones to the full condition.
Link: https://lore.kernel.org/r/20220608011302.92061-1-damien.lemoal@opensource.wdc.com
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_debug.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index cfeadd5f61f1..747e1cbb7ec9 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2747,6 +2747,24 @@ static void zbc_open_zone(struct sdebug_dev_info *devip,
}
}
+static inline void zbc_set_zone_full(struct sdebug_dev_info *devip,
+ struct sdeb_zone_state *zsp)
+{
+ switch (zsp->z_cond) {
+ case ZC2_IMPLICIT_OPEN:
+ devip->nr_imp_open--;
+ break;
+ case ZC3_EXPLICIT_OPEN:
+ devip->nr_exp_open--;
+ break;
+ default:
+ WARN_ONCE(true, "Invalid zone %llu condition %x\n",
+ zsp->z_start, zsp->z_cond);
+ break;
+ }
+ zsp->z_cond = ZC5_FULL;
+}
+
static void zbc_inc_wp(struct sdebug_dev_info *devip,
unsigned long long lba, unsigned int num)
{
@@ -2759,7 +2777,7 @@ static void zbc_inc_wp(struct sdebug_dev_info *devip,
if (zsp->z_type == ZBC_ZONE_TYPE_SWR) {
zsp->z_wp += num;
if (zsp->z_wp >= zend)
- zsp->z_cond = ZC5_FULL;
+ zbc_set_zone_full(devip, zsp);
return;
}
@@ -2778,7 +2796,7 @@ static void zbc_inc_wp(struct sdebug_dev_info *devip,
n = num;
}
if (zsp->z_wp >= zend)
- zsp->z_cond = ZC5_FULL;
+ zbc_set_zone_full(devip, zsp);
num -= n;
lba += n;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 037/135] drm/msm: Switch ordering of runpm put vs devfreq_idle
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 036/135] scsi: scsi_debug: Fix zone transition to full condition Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 038/135] scsi: iscsi: Exclude zero from the endpoint ID range Greg Kroah-Hartman
` (105 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rob Clark, Akhil P Oommen,
Douglas Anderson, Sasha Levin
From: Rob Clark <robdclark@chromium.org>
[ Upstream commit 49e477610087a02c3604061b8f3ee3a25a493987 ]
In msm_devfreq_suspend() we cancel idle_work synchronously so that it
doesn't run after we power of the hw or in the resume path. But this
means that we want to ensure that idle_work is not scheduled *after* we
no longer hold a runpm ref. So switch the ordering of pm_runtime_put()
vs msm_devfreq_idle().
v2. Only move the runpm _put_autosuspend, and not the _mark_last_busy()
Fixes: 9bc95570175a ("drm/msm: Devfreq tuning")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210927152928.831245-1-robdclark@gmail.com
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220608161334.2140611-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/msm_gpu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c
index 2c46cd968ac4..b01d0a521c90 100644
--- a/drivers/gpu/drm/msm/msm_gpu.c
+++ b/drivers/gpu/drm/msm/msm_gpu.c
@@ -658,7 +658,6 @@ static void retire_submit(struct msm_gpu *gpu, struct msm_ringbuffer *ring,
msm_submit_retire(submit);
pm_runtime_mark_last_busy(&gpu->pdev->dev);
- pm_runtime_put_autosuspend(&gpu->pdev->dev);
spin_lock_irqsave(&ring->submit_lock, flags);
list_del(&submit->node);
@@ -672,6 +671,8 @@ static void retire_submit(struct msm_gpu *gpu, struct msm_ringbuffer *ring,
msm_devfreq_idle(gpu);
mutex_unlock(&gpu->active_lock);
+ pm_runtime_put_autosuspend(&gpu->pdev->dev);
+
msm_gem_submit_put(submit);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 038/135] scsi: iscsi: Exclude zero from the endpoint ID range
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 037/135] drm/msm: Switch ordering of runpm put vs devfreq_idle Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 039/135] xsk: Fix generic transmit when completion queue reservation fails Greg Kroah-Hartman
` (104 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Max Gurtovoy, Mike Christie,
Lee Duncan, Sergey Gorenko, Martin K. Petersen, Sasha Levin
From: Sergey Gorenko <sergeygo@nvidia.com>
[ Upstream commit f6eed15f3ea76596ccc689331e1cc850b999133b ]
The kernel returns an endpoint ID as r.ep_connect_ret.handle in the
iscsi_uevent. The iscsid validates a received endpoint ID and treats zero
as an error. The commit referenced in the fixes line changed the endpoint
ID range, and zero is always assigned to the first endpoint ID. So, the
first attempt to create a new iSER connection always fails.
Link: https://lore.kernel.org/r/20220613123854.55073-1-sergeygo@nvidia.com
Fixes: 3c6ae371b8a1 ("scsi: iscsi: Release endpoint ID when its freed")
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_transport_iscsi.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index bcdfcb25349a..5947b9d5746e 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -213,7 +213,12 @@ iscsi_create_endpoint(int dd_size)
return NULL;
mutex_lock(&iscsi_ep_idr_mutex);
- id = idr_alloc(&iscsi_ep_idr, ep, 0, -1, GFP_NOIO);
+
+ /*
+ * First endpoint id should be 1 to comply with user space
+ * applications (iscsid).
+ */
+ id = idr_alloc(&iscsi_ep_idr, ep, 1, -1, GFP_NOIO);
if (id < 0) {
mutex_unlock(&iscsi_ep_idr_mutex);
printk(KERN_ERR "Could not allocate endpoint ID. Error %d.\n",
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 039/135] xsk: Fix generic transmit when completion queue reservation fails
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 038/135] scsi: iscsi: Exclude zero from the endpoint ID range Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 040/135] drm/msm: use for_each_sgtable_sg to iterate over scatterlist Greg Kroah-Hartman
` (103 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ciara Loftus, Daniel Borkmann,
Magnus Karlsson, Sasha Levin
From: Ciara Loftus <ciara.loftus@intel.com>
[ Upstream commit a6e944f25cdbe6b82275402b8bc9a55ad7aac10b ]
Two points of potential failure in the generic transmit function are:
1. completion queue (cq) reservation failure.
2. skb allocation failure
Originally the cq reservation was performed first, followed by the skb
allocation. Commit 675716400da6 ("xdp: fix possible cq entry leak")
reversed the order because at the time there was no mechanism available
to undo the cq reservation which could have led to possible cq entry leaks
in the event of skb allocation failure. However if the skb allocation is
performed first and the cq reservation then fails, the xsk skb destructor
is called which blindly adds the skb address to the already full cq leading
to undefined behavior.
This commit restores the original order (cq reservation followed by skb
allocation) and uses the xskq_prod_cancel helper to undo the cq reserve
in event of skb allocation failure.
Fixes: 675716400da6 ("xdp: fix possible cq entry leak")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220614070746.8871-1-ciara.loftus@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/xdp/xsk.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index 16cc38e51f14..9b55ca27cccf 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -553,12 +553,6 @@ static int xsk_generic_xmit(struct sock *sk)
goto out;
}
- skb = xsk_build_skb(xs, &desc);
- if (IS_ERR(skb)) {
- err = PTR_ERR(skb);
- goto out;
- }
-
/* This is the backpressure mechanism for the Tx path.
* Reserve space in the completion queue and only proceed
* if there is space in it. This avoids having to implement
@@ -567,11 +561,19 @@ static int xsk_generic_xmit(struct sock *sk)
spin_lock_irqsave(&xs->pool->cq_lock, flags);
if (xskq_prod_reserve(xs->pool->cq)) {
spin_unlock_irqrestore(&xs->pool->cq_lock, flags);
- kfree_skb(skb);
goto out;
}
spin_unlock_irqrestore(&xs->pool->cq_lock, flags);
+ skb = xsk_build_skb(xs, &desc);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ spin_lock_irqsave(&xs->pool->cq_lock, flags);
+ xskq_prod_cancel(xs->pool->cq);
+ spin_unlock_irqrestore(&xs->pool->cq_lock, flags);
+ goto out;
+ }
+
err = __dev_direct_xmit(skb, xs->queue_id);
if (err == NETDEV_TX_BUSY) {
/* Tell user-space to retry the send */
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 040/135] drm/msm: use for_each_sgtable_sg to iterate over scatterlist
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 039/135] xsk: Fix generic transmit when completion queue reservation fails Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 041/135] bpf: Fix request_sock leak in sk lookup helpers Greg Kroah-Hartman
` (102 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonathan Marek, Rob Clark, Sasha Levin
From: Jonathan Marek <jonathan@marek.ca>
[ Upstream commit 62b5e322fb6cc5a5a91fdeba0e4e57e75d9f4387 ]
The dma_map_sgtable() call (used to invalidate cache) overwrites sgt->nents
with 1, so msm_iommu_pagetable_map maps only the first physical segment.
To fix this problem use for_each_sgtable_sg(), which uses orig_nents.
Fixes: b145c6e65eb0 ("drm/msm: Add support to create a local pagetable")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20220613221019.11399-1-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/msm_iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/msm_iommu.c b/drivers/gpu/drm/msm/msm_iommu.c
index bcaddbba564d..a54ed354578b 100644
--- a/drivers/gpu/drm/msm/msm_iommu.c
+++ b/drivers/gpu/drm/msm/msm_iommu.c
@@ -58,7 +58,7 @@ static int msm_iommu_pagetable_map(struct msm_mmu *mmu, u64 iova,
u64 addr = iova;
unsigned int i;
- for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ for_each_sgtable_sg(sgt, sg, i) {
size_t size = sg->length;
phys_addr_t phys = sg_phys(sg);
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 041/135] bpf: Fix request_sock leak in sk lookup helpers
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 040/135] drm/msm: use for_each_sgtable_sg to iterate over scatterlist Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 042/135] drm/sun4i: Fix crash during suspend after component bind failure Greg Kroah-Hartman
` (101 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Antoine Tenart, Jon Maxwell,
Daniel Borkmann, Curtis Taylor, Martin KaFai Lau, Sasha Levin
From: Jon Maxwell <jmaxwell37@gmail.com>
[ Upstream commit 3046a827316c0e55fc563b4fb78c93b9ca5c7c37 ]
A customer reported a request_socket leak in a Calico cloud environment. We
found that a BPF program was doing a socket lookup with takes a refcnt on
the socket and that it was finding the request_socket but returning the parent
LISTEN socket via sk_to_full_sk() without decrementing the child request socket
1st, resulting in request_sock slab object leak. This patch retains the
existing behaviour of returning full socks to the caller but it also decrements
the child request_socket if one is present before doing so to prevent the leak.
Thanks to Curtis Taylor for all the help in diagnosing and testing this. And
thanks to Antoine Tenart for the reproducer and patch input.
v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to
validate RCU flags on the listen socket so that it balances with bpf_sk_release()
and update comments as per Martin KaFai Lau's suggestion. One small change to
Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra
instruction.
Fixes: f7355a6c0497 ("bpf: Check sk_fullsock() before returning from bpf_sk_lookup()")
Fixes: edbf8c01de5a ("bpf: add skc_lookup_tcp helper")
Co-developed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Curtis Taylor <cutaylor-pub@yahoo.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/56d6f898-bde0-bb25-3427-12a330b29fb8@iogearbox.net
Link: https://lore.kernel.org/bpf/20220615011540.813025-1-jmaxwell37@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/filter.c | 34 ++++++++++++++++++++++++++++------
1 file changed, 28 insertions(+), 6 deletions(-)
diff --git a/net/core/filter.c b/net/core/filter.c
index 0816468c545c..d1e2ef77ce4c 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -6209,10 +6209,21 @@ __bpf_sk_lookup(struct sk_buff *skb, struct bpf_sock_tuple *tuple, u32 len,
ifindex, proto, netns_id, flags);
if (sk) {
- sk = sk_to_full_sk(sk);
- if (!sk_fullsock(sk)) {
+ struct sock *sk2 = sk_to_full_sk(sk);
+
+ /* sk_to_full_sk() may return (sk)->rsk_listener, so make sure the original sk
+ * sock refcnt is decremented to prevent a request_sock leak.
+ */
+ if (!sk_fullsock(sk2))
+ sk2 = NULL;
+ if (sk2 != sk) {
sock_gen_put(sk);
- return NULL;
+ /* Ensure there is no need to bump sk2 refcnt */
+ if (unlikely(sk2 && !sock_flag(sk2, SOCK_RCU_FREE))) {
+ WARN_ONCE(1, "Found non-RCU, unreferenced socket!");
+ return NULL;
+ }
+ sk = sk2;
}
}
@@ -6246,10 +6257,21 @@ bpf_sk_lookup(struct sk_buff *skb, struct bpf_sock_tuple *tuple, u32 len,
flags);
if (sk) {
- sk = sk_to_full_sk(sk);
- if (!sk_fullsock(sk)) {
+ struct sock *sk2 = sk_to_full_sk(sk);
+
+ /* sk_to_full_sk() may return (sk)->rsk_listener, so make sure the original sk
+ * sock refcnt is decremented to prevent a request_sock leak.
+ */
+ if (!sk_fullsock(sk2))
+ sk2 = NULL;
+ if (sk2 != sk) {
sock_gen_put(sk);
- return NULL;
+ /* Ensure there is no need to bump sk2 refcnt */
+ if (unlikely(sk2 && !sock_flag(sk2, SOCK_RCU_FREE))) {
+ WARN_ONCE(1, "Found non-RCU, unreferenced socket!");
+ return NULL;
+ }
+ sk = sk2;
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 042/135] drm/sun4i: Fix crash during suspend after component bind failure
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 041/135] bpf: Fix request_sock leak in sk lookup helpers Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 043/135] bpf, x86: Fix tail call count offset calculation on bpf2bpf call Greg Kroah-Hartman
` (100 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Samuel Holland, Jernej Skrabec,
Maxime Ripard, Sasha Levin
From: Samuel Holland <samuel@sholland.org>
[ Upstream commit 1342b5b23da9559a1578978eaff7f797d8a87d91 ]
If the component driver fails to bind, or is unbound, the driver data
for the top-level platform device points to a freed drm_device. If the
system is then suspended, the driver passes this dangling pointer to
drm_mode_config_helper_suspend(), which crashes.
Fix this by only setting the driver data while the platform driver holds
a reference to the drm_device.
Fixes: 624b4b48d9d8 ("drm: sun4i: Add support for suspending the display driver")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615054254.16352-1-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/sun4i/sun4i_drv.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
index 54dd562e294c..5b7061e2bca4 100644
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -72,7 +72,6 @@ static int sun4i_drv_bind(struct device *dev)
goto free_drm;
}
- dev_set_drvdata(dev, drm);
drm->dev_private = drv;
INIT_LIST_HEAD(&drv->frontend_list);
INIT_LIST_HEAD(&drv->engine_list);
@@ -113,6 +112,8 @@ static int sun4i_drv_bind(struct device *dev)
drm_fbdev_generic_setup(drm, 32);
+ dev_set_drvdata(dev, drm);
+
return 0;
finish_poll:
@@ -129,6 +130,7 @@ static void sun4i_drv_unbind(struct device *dev)
{
struct drm_device *drm = dev_get_drvdata(dev);
+ dev_set_drvdata(dev, NULL);
drm_dev_unregister(drm);
drm_kms_helper_poll_fini(drm);
drm_atomic_helper_shutdown(drm);
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 043/135] bpf, x86: Fix tail call count offset calculation on bpf2bpf call
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 042/135] drm/sun4i: Fix crash during suspend after component bind failure Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 044/135] scsi: storvsc: Correct reporting of Hyper-V I/O size limits Greg Kroah-Hartman
` (99 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jakub Sitnicki, Daniel Borkmann,
Maciej Fijalkowski, Sasha Levin
From: Jakub Sitnicki <jakub@cloudflare.com>
[ Upstream commit ff672c67ee7635ca1e28fb13729e8ef0d1f08ce5 ]
On x86-64 the tail call count is passed from one BPF function to another
through %rax. Additionally, on function entry, the tail call count value
is stored on stack right after the BPF program stack, due to register
shortage.
The stored count is later loaded from stack either when performing a tail
call - to check if we have not reached the tail call limit - or before
calling another BPF function call in order to pass it via %rax.
In the latter case, we miscalculate the offset at which the tail call count
was stored on function entry. The JIT does not take into account that the
allocated BPF program stack is always a multiple of 8 on x86, while the
actual stack depth does not have to be.
This leads to a load from an offset that belongs to the BPF stack, as shown
in the example below:
SEC("tc")
int entry(struct __sk_buff *skb)
{
/* Have data on stack which size is not a multiple of 8 */
volatile char arr[1] = {};
return subprog_tail(skb);
}
int entry(struct __sk_buff * skb):
0: (b4) w2 = 0
1: (73) *(u8 *)(r10 -1) = r2
2: (85) call pc+1#bpf_prog_ce2f79bb5f3e06dd_F
3: (95) exit
int entry(struct __sk_buff * skb):
0xffffffffa0201788: nop DWORD PTR [rax+rax*1+0x0]
0xffffffffa020178d: xor eax,eax
0xffffffffa020178f: push rbp
0xffffffffa0201790: mov rbp,rsp
0xffffffffa0201793: sub rsp,0x8
0xffffffffa020179a: push rax
0xffffffffa020179b: xor esi,esi
0xffffffffa020179d: mov BYTE PTR [rbp-0x1],sil
0xffffffffa02017a1: mov rax,QWORD PTR [rbp-0x9] !!! tail call count
0xffffffffa02017a8: call 0xffffffffa02017d8 !!! is at rbp-0x10
0xffffffffa02017ad: leave
0xffffffffa02017ae: ret
Fix it by rounding up the BPF stack depth to a multiple of 8, when
calculating the tail call count offset on stack.
Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220616162037.535469-2-jakub@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/net/bpf_jit_comp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index d99434dc215c..8dca2bcbb0ea 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -1440,8 +1440,9 @@ st: if (is_imm8(insn->off))
case BPF_JMP | BPF_CALL:
func = (u8 *) __bpf_call_base + imm32;
if (tail_call_reachable) {
+ /* mov rax, qword ptr [rbp - rounded_stack_depth - 8] */
EMIT3_off32(0x48, 0x8B, 0x85,
- -(bpf_prog->aux->stack_depth + 8));
+ -round_up(bpf_prog->aux->stack_depth, 8) - 8);
if (!imm32 || emit_call(&prog, func, image + addrs[i - 1] + 7))
return -EINVAL;
} else {
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 044/135] scsi: storvsc: Correct reporting of Hyper-V I/O size limits
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 043/135] bpf, x86: Fix tail call count offset calculation on bpf2bpf call Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 045/135] phy: aquantia: Fix AN when higher speeds than 1G are not advertised Greg Kroah-Hartman
` (98 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Kelley, Saurabh Sengar,
Martin K. Petersen, Sasha Levin
From: Saurabh Sengar <ssengar@linux.microsoft.com>
[ Upstream commit 1d3e0980782fbafaf93285779fd3905e4f866802 ]
Current code is based on the idea that the max number of SGL entries
also determines the max size of an I/O request. While this idea was
true in older versions of the storvsc driver when SGL entry length
was limited to 4 Kbytes, commit 3d9c3dcc58e9 ("scsi: storvsc: Enable
scatterlist entry lengths > 4Kbytes") removed that limitation. It's
now theoretically possible for the block layer to send requests that
exceed the maximum size supported by Hyper-V. This problem doesn't
currently happen in practice because the block layer defaults to a
512 Kbyte maximum, while Hyper-V in Azure supports 2 Mbyte I/O sizes.
But some future configuration of Hyper-V could have a smaller max I/O
size, and the block layer could exceed that max.
Fix this by correctly setting max_sectors as well as sg_tablesize to
reflect the maximum I/O size that Hyper-V reports. While allowing
I/O sizes larger than the block layer default of 512 Kbytes doesn’t
provide any noticeable performance benefit in the tests we ran, it's
still appropriate to report the correct underlying Hyper-V capabilities
to the Linux block layer.
Also tweak the virt_boundary_mask to reflect that the required
alignment derives from Hyper-V communication using a 4 Kbyte page size,
and not on the guest page size, which might be bigger (eg. ARM64).
Link: https://lore.kernel.org/r/1655190355-28722-1-git-send-email-ssengar@linux.microsoft.com
Fixes: 3d9c3dcc58e9 ("scsi: storvsc: Enable scatter list entry lengths > 4Kbytes")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/storvsc_drv.c | 27 ++++++++++++++++++++++-----
1 file changed, 22 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 9eb1b88a29dd..71c7f7b435c4 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1907,7 +1907,7 @@ static struct scsi_host_template scsi_driver = {
.cmd_per_lun = 2048,
.this_id = -1,
/* Ensure there are no gaps in presented sgls */
- .virt_boundary_mask = PAGE_SIZE-1,
+ .virt_boundary_mask = HV_HYP_PAGE_SIZE - 1,
.no_write_same = 1,
.track_queue_depth = 1,
.change_queue_depth = storvsc_change_queue_depth,
@@ -1961,6 +1961,7 @@ static int storvsc_probe(struct hv_device *device,
int max_targets;
int max_channels;
int max_sub_channels = 0;
+ u32 max_xfer_bytes;
/*
* Based on the windows host we are running on,
@@ -2049,12 +2050,28 @@ static int storvsc_probe(struct hv_device *device,
}
/* max cmd length */
host->max_cmd_len = STORVSC_MAX_CMD_LEN;
-
/*
- * set the table size based on the info we got
- * from the host.
+ * Any reasonable Hyper-V configuration should provide
+ * max_transfer_bytes value aligning to HV_HYP_PAGE_SIZE,
+ * protecting it from any weird value.
+ */
+ max_xfer_bytes = round_down(stor_device->max_transfer_bytes, HV_HYP_PAGE_SIZE);
+ /* max_hw_sectors_kb */
+ host->max_sectors = max_xfer_bytes >> 9;
+ /*
+ * There are 2 requirements for Hyper-V storvsc sgl segments,
+ * based on which the below calculation for max segments is
+ * done:
+ *
+ * 1. Except for the first and last sgl segment, all sgl segments
+ * should be align to HV_HYP_PAGE_SIZE, that also means the
+ * maximum number of segments in a sgl can be calculated by
+ * dividing the total max transfer length by HV_HYP_PAGE_SIZE.
+ *
+ * 2. Except for the first and last, each entry in the SGL must
+ * have an offset that is a multiple of HV_HYP_PAGE_SIZE.
*/
- host->sg_tablesize = (stor_device->max_transfer_bytes >> PAGE_SHIFT);
+ host->sg_tablesize = (max_xfer_bytes >> HV_HYP_PAGE_SHIFT) + 1;
/*
* For non-IDE disks, the host supports multiple channels.
* Set the number of HW queues we are supporting.
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 045/135] phy: aquantia: Fix AN when higher speeds than 1G are not advertised
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 044/135] scsi: storvsc: Correct reporting of Hyper-V I/O size limits Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 046/135] KVM: arm64: Prevent kmemleak from accessing pKVM memory Greg Kroah-Hartman
` (97 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ondrej Spacek, Claudiu Manoil,
Jakub Kicinski, Sasha Levin
From: Claudiu Manoil <claudiu.manoil@nxp.com>
[ Upstream commit 9b7fd1670a94a57d974795acebde843a5c1a354e ]
Even when the eth port is resticted to work with speeds not higher than 1G,
and so the eth driver is requesting the phy (via phylink) to advertise up
to 1000BASET support, the aquantia phy device is still advertising for 2.5G
and 5G speeds.
Clear these advertising defaults when requested.
Cc: Ondrej Spacek <ondrej.spacek@nxp.com>
Fixes: 09c4c57f7bc41 ("net: phy: aquantia: add support for auto-negotiation configuration")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/aquantia_main.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index 968dd43a2b1e..3221224525ac 100644
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -34,6 +34,8 @@
#define MDIO_AN_VEND_PROV 0xc400
#define MDIO_AN_VEND_PROV_1000BASET_FULL BIT(15)
#define MDIO_AN_VEND_PROV_1000BASET_HALF BIT(14)
+#define MDIO_AN_VEND_PROV_5000BASET_FULL BIT(11)
+#define MDIO_AN_VEND_PROV_2500BASET_FULL BIT(10)
#define MDIO_AN_VEND_PROV_DOWNSHIFT_EN BIT(4)
#define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK GENMASK(3, 0)
#define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT 4
@@ -231,9 +233,20 @@ static int aqr_config_aneg(struct phy_device *phydev)
phydev->advertising))
reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;
+ /* Handle the case when the 2.5G and 5G speeds are not advertised */
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+ phydev->advertising))
+ reg |= MDIO_AN_VEND_PROV_2500BASET_FULL;
+
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+ phydev->advertising))
+ reg |= MDIO_AN_VEND_PROV_5000BASET_FULL;
+
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
MDIO_AN_VEND_PROV_1000BASET_HALF |
- MDIO_AN_VEND_PROV_1000BASET_FULL, reg);
+ MDIO_AN_VEND_PROV_1000BASET_FULL |
+ MDIO_AN_VEND_PROV_2500BASET_FULL |
+ MDIO_AN_VEND_PROV_5000BASET_FULL, reg);
if (ret < 0)
return ret;
if (ret > 0)
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 046/135] KVM: arm64: Prevent kmemleak from accessing pKVM memory
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 045/135] phy: aquantia: Fix AN when higher speeds than 1G are not advertised Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 047/135] net: Write lock dev_base_lock without disabling bottom halves Greg Kroah-Hartman
` (96 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mike Rapoport, Quentin Perret,
Catalin Marinas, Marc Zyngier, Sasha Levin
From: Quentin Perret <qperret@google.com>
[ Upstream commit 56961c6331463cce2d84d0f973177a517fb33a82 ]
Commit a7259df76702 ("memblock: make memblock_find_in_range method
private") changed the API using which memory is reserved for the pKVM
hypervisor. However, memblock_phys_alloc() differs from the original API in
terms of kmemleak semantics -- the old one didn't report the reserved
regions to kmemleak while the new one does. Unfortunately, when protected
KVM is enabled, all kernel accesses to pKVM-private memory result in a
fatal exception, which can now happen because of kmemleak scans:
$ echo scan > /sys/kernel/debug/kmemleak
[ 34.991354] kvm [304]: nVHE hyp BUG at: [<ffff800008fa3750>] __kvm_nvhe_handle_host_mem_abort+0x270/0x290!
[ 34.991580] kvm [304]: Hyp Offset: 0xfffe8be807e00000
[ 34.991813] Kernel panic - not syncing: HYP panic:
[ 34.991813] PS:600003c9 PC:0000f418011a3750 ESR:00000000f2000800
[ 34.991813] FAR:ffff000439200000 HPFAR:0000000004792000 PAR:0000000000000000
[ 34.991813] VCPU:0000000000000000
[ 34.993660] CPU: 0 PID: 304 Comm: bash Not tainted 5.19.0-rc2 #102
[ 34.994059] Hardware name: linux,dummy-virt (DT)
[ 34.994452] Call trace:
[ 34.994641] dump_backtrace.part.0+0xcc/0xe0
[ 34.994932] show_stack+0x18/0x6c
[ 34.995094] dump_stack_lvl+0x68/0x84
[ 34.995276] dump_stack+0x18/0x34
[ 34.995484] panic+0x16c/0x354
[ 34.995673] __hyp_pgtable_total_pages+0x0/0x60
[ 34.995933] scan_block+0x74/0x12c
[ 34.996129] scan_gray_list+0xd8/0x19c
[ 34.996332] kmemleak_scan+0x2c8/0x580
[ 34.996535] kmemleak_write+0x340/0x4a0
[ 34.996744] full_proxy_write+0x60/0xbc
[ 34.996967] vfs_write+0xc4/0x2b0
[ 34.997136] ksys_write+0x68/0xf4
[ 34.997311] __arm64_sys_write+0x20/0x2c
[ 34.997532] invoke_syscall+0x48/0x114
[ 34.997779] el0_svc_common.constprop.0+0x44/0xec
[ 34.998029] do_el0_svc+0x2c/0xc0
[ 34.998205] el0_svc+0x2c/0x84
[ 34.998421] el0t_64_sync_handler+0xf4/0x100
[ 34.998653] el0t_64_sync+0x18c/0x190
[ 34.999252] SMP: stopping secondary CPUs
[ 35.000034] Kernel Offset: disabled
[ 35.000261] CPU features: 0x800,00007831,00001086
[ 35.000642] Memory Limit: none
[ 35.001329] ---[ end Kernel panic - not syncing: HYP panic:
[ 35.001329] PS:600003c9 PC:0000f418011a3750 ESR:00000000f2000800
[ 35.001329] FAR:ffff000439200000 HPFAR:0000000004792000 PAR:0000000000000000
[ 35.001329] VCPU:0000000000000000 ]---
Fix this by explicitly excluding the hypervisor's memory pool from
kmemleak like we already do for the hyp BSS.
Cc: Mike Rapoport <rppt@kernel.org>
Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private")
Signed-off-by: Quentin Perret <qperret@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220616161135.3997786-1-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/kvm/arm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index a30c036577a3..f181527f9d43 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -2011,11 +2011,11 @@ static int finalize_hyp_mode(void)
return 0;
/*
- * Exclude HYP BSS from kmemleak so that it doesn't get peeked
- * at, which would end badly once the section is inaccessible.
- * None of other sections should ever be introspected.
+ * Exclude HYP sections from kmemleak so that they don't get peeked
+ * at, which would end badly once inaccessible.
*/
kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start);
+ kmemleak_free_part(__va(hyp_mem_base), hyp_mem_size);
return pkvm_drop_host_privileges();
}
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 047/135] net: Write lock dev_base_lock without disabling bottom halves.
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 046/135] KVM: arm64: Prevent kmemleak from accessing pKVM memory Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 048/135] net: fix data-race in dev_isalive() Greg Kroah-Hartman
` (95 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pei Zhang, Luis Claudio R. Goncalves,
Sebastian Andrzej Siewior, David S. Miller, Sasha Levin
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ Upstream commit fd888e85fe6b661e78044dddfec0be5271afa626 ]
The writer acquires dev_base_lock with disabled bottom halves.
The reader can acquire dev_base_lock without disabling bottom halves
because there is no writer in softirq context.
On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts
as a lock to ensure that resources, that are protected by disabling
bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with
disabled bottom halves (as in write_lock_bh()) and somewhere else with
enabled bottom halves (as by read_lock() in netstat_show()) followed by
disabling bottom halves (cxgb_get_stats() -> t4_wr_mbox_meat_timeout()
-> spin_lock_bh()). This is the reverse locking order.
All read_lock() invocation are from sysfs callback which are not invoked
from softirq context. Therefore there is no need to disable bottom
halves while acquiring a write lock.
Acquire the write lock of dev_base_lock without disabling bottom halves.
Reported-by: Pei Zhang <pezhang@redhat.com>
Reported-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/dev.c | 16 ++++++++--------
net/core/link_watch.c | 4 ++--
net/core/rtnetlink.c | 8 ++++----
net/hsr/hsr_device.c | 6 +++---
4 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index b9731b267d07..860fc6a98373 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -365,12 +365,12 @@ static void list_netdevice(struct net_device *dev)
ASSERT_RTNL();
- write_lock_bh(&dev_base_lock);
+ write_lock(&dev_base_lock);
list_add_tail_rcu(&dev->dev_list, &net->dev_base_head);
netdev_name_node_add(net, dev->name_node);
hlist_add_head_rcu(&dev->index_hlist,
dev_index_hash(net, dev->ifindex));
- write_unlock_bh(&dev_base_lock);
+ write_unlock(&dev_base_lock);
dev_base_seq_inc(net);
}
@@ -383,11 +383,11 @@ static void unlist_netdevice(struct net_device *dev)
ASSERT_RTNL();
/* Unlink dev from the device chain */
- write_lock_bh(&dev_base_lock);
+ write_lock(&dev_base_lock);
list_del_rcu(&dev->dev_list);
netdev_name_node_del(dev->name_node);
hlist_del_rcu(&dev->index_hlist);
- write_unlock_bh(&dev_base_lock);
+ write_unlock(&dev_base_lock);
dev_base_seq_inc(dev_net(dev));
}
@@ -1266,15 +1266,15 @@ int dev_change_name(struct net_device *dev, const char *newname)
netdev_adjacent_rename_links(dev, oldname);
- write_lock_bh(&dev_base_lock);
+ write_lock(&dev_base_lock);
netdev_name_node_del(dev->name_node);
- write_unlock_bh(&dev_base_lock);
+ write_unlock(&dev_base_lock);
synchronize_rcu();
- write_lock_bh(&dev_base_lock);
+ write_lock(&dev_base_lock);
netdev_name_node_add(net, dev->name_node);
- write_unlock_bh(&dev_base_lock);
+ write_unlock(&dev_base_lock);
ret = call_netdevice_notifiers(NETDEV_CHANGENAME, dev);
ret = notifier_to_errno(ret);
diff --git a/net/core/link_watch.c b/net/core/link_watch.c
index 1a455847da54..9599afd0862d 100644
--- a/net/core/link_watch.c
+++ b/net/core/link_watch.c
@@ -55,7 +55,7 @@ static void rfc2863_policy(struct net_device *dev)
if (operstate == dev->operstate)
return;
- write_lock_bh(&dev_base_lock);
+ write_lock(&dev_base_lock);
switch(dev->link_mode) {
case IF_LINK_MODE_TESTING:
@@ -74,7 +74,7 @@ static void rfc2863_policy(struct net_device *dev)
dev->operstate = operstate;
- write_unlock_bh(&dev_base_lock);
+ write_unlock(&dev_base_lock);
}
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 9c0e8ccf9bc5..8c85e93daa73 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -842,9 +842,9 @@ static void set_operstate(struct net_device *dev, unsigned char transition)
}
if (dev->operstate != operstate) {
- write_lock_bh(&dev_base_lock);
+ write_lock(&dev_base_lock);
dev->operstate = operstate;
- write_unlock_bh(&dev_base_lock);
+ write_unlock(&dev_base_lock);
netdev_state_change(dev);
}
}
@@ -2781,11 +2781,11 @@ static int do_setlink(const struct sk_buff *skb,
if (tb[IFLA_LINKMODE]) {
unsigned char value = nla_get_u8(tb[IFLA_LINKMODE]);
- write_lock_bh(&dev_base_lock);
+ write_lock(&dev_base_lock);
if (dev->link_mode ^ value)
status |= DO_SETLINK_NOTIFY;
dev->link_mode = value;
- write_unlock_bh(&dev_base_lock);
+ write_unlock(&dev_base_lock);
}
if (tb[IFLA_VFINFO_LIST]) {
diff --git a/net/hsr/hsr_device.c b/net/hsr/hsr_device.c
index 26c32407f029..ea7b96e296ef 100644
--- a/net/hsr/hsr_device.c
+++ b/net/hsr/hsr_device.c
@@ -30,13 +30,13 @@ static bool is_slave_up(struct net_device *dev)
static void __hsr_set_operstate(struct net_device *dev, int transition)
{
- write_lock_bh(&dev_base_lock);
+ write_lock(&dev_base_lock);
if (dev->operstate != transition) {
dev->operstate = transition;
- write_unlock_bh(&dev_base_lock);
+ write_unlock(&dev_base_lock);
netdev_state_change(dev);
} else {
- write_unlock_bh(&dev_base_lock);
+ write_unlock(&dev_base_lock);
}
}
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 048/135] net: fix data-race in dev_isalive()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 047/135] net: Write lock dev_base_lock without disabling bottom halves Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 049/135] tipc: fix use-after-free Read in tipc_named_reinit Greg Kroah-Hartman
` (94 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, syzbot,
David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit cc26c2661fefea215f41edb665193324a5f99021 ]
dev_isalive() is called under RTNL or dev_base_lock protection.
This means that changes to dev->reg_state should be done with both locks held.
syzbot reported:
BUG: KCSAN: data-race in register_netdevice / type_show
write to 0xffff888144ecf518 of 1 bytes by task 20886 on cpu 0:
register_netdevice+0xb9f/0xdf0 net/core/dev.c:10050
lapbeth_new_device drivers/net/wan/lapbether.c:414 [inline]
lapbeth_device_event+0x4a0/0x6c0 drivers/net/wan/lapbether.c:456
notifier_call_chain kernel/notifier.c:87 [inline]
raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:455
__dev_notify_flags+0x1d6/0x3a0
dev_change_flags+0xa2/0xc0 net/core/dev.c:8607
do_setlink+0x778/0x2230 net/core/rtnetlink.c:2780
__rtnl_newlink net/core/rtnetlink.c:3546 [inline]
rtnl_newlink+0x114c/0x16a0 net/core/rtnetlink.c:3593
rtnetlink_rcv_msg+0x811/0x8c0 net/core/rtnetlink.c:6089
netlink_rcv_skb+0x13e/0x240 net/netlink/af_netlink.c:2501
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6107
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x58a/0x660 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x661/0x750 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
__sys_sendto+0x21e/0x2c0 net/socket.c:2119
__do_sys_sendto net/socket.c:2131 [inline]
__se_sys_sendto net/socket.c:2127 [inline]
__x64_sys_sendto+0x74/0x90 net/socket.c:2127
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
read to 0xffff888144ecf518 of 1 bytes by task 20423 on cpu 1:
dev_isalive net/core/net-sysfs.c:38 [inline]
netdev_show net/core/net-sysfs.c:50 [inline]
type_show+0x24/0x90 net/core/net-sysfs.c:112
dev_attr_show+0x35/0x90 drivers/base/core.c:2095
sysfs_kf_seq_show+0x175/0x240 fs/sysfs/file.c:59
kernfs_seq_show+0x75/0x80 fs/kernfs/file.c:162
seq_read_iter+0x2c3/0x8e0 fs/seq_file.c:230
kernfs_fop_read_iter+0xd1/0x2f0 fs/kernfs/file.c:235
call_read_iter include/linux/fs.h:2052 [inline]
new_sync_read fs/read_write.c:401 [inline]
vfs_read+0x5a5/0x6a0 fs/read_write.c:482
ksys_read+0xe8/0x1a0 fs/read_write.c:620
__do_sys_read fs/read_write.c:630 [inline]
__se_sys_read fs/read_write.c:628 [inline]
__x64_sys_read+0x3e/0x50 fs/read_write.c:628
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
value changed: 0x00 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 20423 Comm: udevd Tainted: G W 5.19.0-rc2-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/dev.c | 28 ++++++++++++++++------------
net/core/net-sysfs.c | 1 +
2 files changed, 17 insertions(+), 12 deletions(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index 860fc6a98373..6111506a4105 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -378,16 +378,18 @@ static void list_netdevice(struct net_device *dev)
/* Device list removal
* caller must respect a RCU grace period before freeing/reusing dev
*/
-static void unlist_netdevice(struct net_device *dev)
+static void unlist_netdevice(struct net_device *dev, bool lock)
{
ASSERT_RTNL();
/* Unlink dev from the device chain */
- write_lock(&dev_base_lock);
+ if (lock)
+ write_lock(&dev_base_lock);
list_del_rcu(&dev->dev_list);
netdev_name_node_del(dev->name_node);
hlist_del_rcu(&dev->index_hlist);
- write_unlock(&dev_base_lock);
+ if (lock)
+ write_unlock(&dev_base_lock);
dev_base_seq_inc(dev_net(dev));
}
@@ -10319,11 +10321,11 @@ int register_netdevice(struct net_device *dev)
goto err_uninit;
ret = netdev_register_kobject(dev);
- if (ret) {
- dev->reg_state = NETREG_UNREGISTERED;
+ write_lock(&dev_base_lock);
+ dev->reg_state = ret ? NETREG_UNREGISTERED : NETREG_REGISTERED;
+ write_unlock(&dev_base_lock);
+ if (ret)
goto err_uninit;
- }
- dev->reg_state = NETREG_REGISTERED;
__netdev_update_features(dev);
@@ -10483,8 +10485,6 @@ static void netdev_wait_allrefs(struct net_device *dev)
unsigned long rebroadcast_time, warning_time;
int wait = 0, refcnt;
- linkwatch_forget_dev(dev);
-
rebroadcast_time = warning_time = jiffies;
refcnt = netdev_refcnt_read(dev);
@@ -10598,7 +10598,10 @@ void netdev_run_todo(void)
continue;
}
+ write_lock(&dev_base_lock);
dev->reg_state = NETREG_UNREGISTERED;
+ write_unlock(&dev_base_lock);
+ linkwatch_forget_dev(dev);
netdev_wait_allrefs(dev);
@@ -11043,9 +11046,10 @@ void unregister_netdevice_many(struct list_head *head)
list_for_each_entry(dev, head, unreg_list) {
/* And unlink it from device chain. */
- unlist_netdevice(dev);
-
+ write_lock(&dev_base_lock);
+ unlist_netdevice(dev, false);
dev->reg_state = NETREG_UNREGISTERING;
+ write_unlock(&dev_base_lock);
}
flush_all_backlogs();
@@ -11190,7 +11194,7 @@ int __dev_change_net_namespace(struct net_device *dev, struct net *net,
dev_close(dev);
/* And unlink it from device chain */
- unlist_netdevice(dev);
+ unlist_netdevice(dev, true);
synchronize_net();
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 9e5657f63245..e9ea0695efb4 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -32,6 +32,7 @@ static const char fmt_dec[] = "%d\n";
static const char fmt_ulong[] = "%lu\n";
static const char fmt_u64[] = "%llu\n";
+/* Caller holds RTNL or dev_base_lock */
static inline int dev_isalive(const struct net_device *dev)
{
return dev->reg_state <= NETREG_REGISTERED;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 049/135] tipc: fix use-after-free Read in tipc_named_reinit
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 048/135] net: fix data-race in dev_isalive() Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 050/135] igb: fix a use-after-free issue in igb_clean_tx_ring Greg Kroah-Hartman
` (93 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+47af19f3307fc9c5c82e,
Jon Maloy, Ying Xue, Hoang Le, David S. Miller, Sasha Levin
From: Hoang Le <hoang.h.le@dektech.com.au>
[ Upstream commit 911600bf5a5e84bfda4d33ee32acc75ecf6159f0 ]
syzbot found the following issue on:
==================================================================
BUG: KASAN: use-after-free in tipc_named_reinit+0x94f/0x9b0
net/tipc/name_distr.c:413
Read of size 8 at addr ffff88805299a000 by task kworker/1:9/23764
CPU: 1 PID: 23764 Comm: kworker/1:9 Not tainted
5.18.0-rc4-syzkaller-00878-g17d49e6e8012 #0
Hardware name: Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Workqueue: events tipc_net_finalize_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0xeb/0x495
mm/kasan/report.c:313
print_report mm/kasan/report.c:429 [inline]
kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
tipc_named_reinit+0x94f/0x9b0 net/tipc/name_distr.c:413
tipc_net_finalize+0x234/0x3d0 net/tipc/net.c:138
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
</TASK>
[...]
==================================================================
In the commit
d966ddcc3821 ("tipc: fix a deadlock when flushing scheduled work"),
the cancel_work_sync() function just to make sure ONLY the work
tipc_net_finalize_work() is executing/pending on any CPU completed before
tipc namespace is destroyed through tipc_exit_net(). But this function
is not guaranteed the work is the last queued. So, the destroyed instance
may be accessed in the work which will try to enqueue later.
In order to completely fix, we re-order the calling of cancel_work_sync()
to make sure the work tipc_net_finalize_work() was last queued and it
must be completed by calling cancel_work_sync().
Reported-by: syzbot+47af19f3307fc9c5c82e@syzkaller.appspotmail.com
Fixes: d966ddcc3821 ("tipc: fix a deadlock when flushing scheduled work")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/tipc/core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/net/tipc/core.c b/net/tipc/core.c
index 3f4542e0f065..434e70eabe08 100644
--- a/net/tipc/core.c
+++ b/net/tipc/core.c
@@ -109,10 +109,9 @@ static void __net_exit tipc_exit_net(struct net *net)
struct tipc_net *tn = tipc_net(net);
tipc_detach_loopback(net);
+ tipc_net_stop(net);
/* Make sure the tipc_net_finalize_work() finished */
cancel_work_sync(&tn->work);
- tipc_net_stop(net);
-
tipc_bcast_stop(net);
tipc_nametbl_stop(net);
tipc_sk_rht_destroy(net);
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 050/135] igb: fix a use-after-free issue in igb_clean_tx_ring
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 049/135] tipc: fix use-after-free Read in tipc_named_reinit Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 051/135] bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers Greg Kroah-Hartman
` (92 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lorenzo Bianconi, Jesse Brandeburg,
Jesper Dangaard Brouer, Jakub Kicinski, Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 3f6a57ee8544ec3982f8a3cbcbf4aea7d47eb9ec ]
Fix the following use-after-free bug in igb_clean_tx_ring routine when
the NIC is running in XDP mode. The issue can be triggered redirecting
traffic into the igb NIC and then closing the device while the traffic
is flowing.
[ 73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9
[ 73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017
[ 73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0
[ 73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282
[ 73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000
[ 73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0
[ 73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058
[ 73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090
[ 73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000
[ 73.404806] FS: 00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000
[ 73.413129] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0
[ 73.426565] Call Trace:
[ 73.429087] <TASK>
[ 73.431314] igb_clean_tx_ring+0x43/0x140 [igb]
[ 73.436002] igb_down+0x1d7/0x220 [igb]
[ 73.439974] __igb_close+0x3c/0x120 [igb]
[ 73.444118] igb_xdp+0x10c/0x150 [igb]
[ 73.447983] ? igb_pci_sriov_configure+0x70/0x70 [igb]
[ 73.453362] dev_xdp_install+0xda/0x110
[ 73.457371] dev_xdp_attach+0x1da/0x550
[ 73.461369] do_setlink+0xfd0/0x10f0
[ 73.465166] ? __nla_validate_parse+0x89/0xc70
[ 73.469714] rtnl_setlink+0x11a/0x1e0
[ 73.473547] rtnetlink_rcv_msg+0x145/0x3d0
[ 73.477709] ? rtnl_calcit.isra.0+0x130/0x130
[ 73.482258] netlink_rcv_skb+0x8d/0x110
[ 73.486229] netlink_unicast+0x230/0x340
[ 73.490317] netlink_sendmsg+0x215/0x470
[ 73.494395] __sys_sendto+0x179/0x190
[ 73.498268] ? move_addr_to_user+0x37/0x70
[ 73.502547] ? __sys_getsockname+0x84/0xe0
[ 73.506853] ? netlink_setsockopt+0x1c1/0x4a0
[ 73.511349] ? __sys_setsockopt+0xc8/0x1d0
[ 73.515636] __x64_sys_sendto+0x20/0x30
[ 73.519603] do_syscall_64+0x3b/0x80
[ 73.523399] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 73.528712] RIP: 0033:0x7ff38d41f20c
[ 73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c
[ 73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003
[ 73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
[ 73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0
[ 73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30
[ 73.596545] </TASK>
[ 73.598842] ---[ end trace 0000000000000000 ]---
Fixes: 9cbc948b5a20c ("igb: add XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/e5c01d549dc37bff18e46aeabd6fb28a7bcf84be.1655388571.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igb/igb_main.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index b88303351484..5ee5ee8e6848 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4819,8 +4819,11 @@ static void igb_clean_tx_ring(struct igb_ring *tx_ring)
while (i != tx_ring->next_to_use) {
union e1000_adv_tx_desc *eop_desc, *tx_desc;
- /* Free all the Tx ring sk_buffs */
- dev_kfree_skb_any(tx_buffer->skb);
+ /* Free all the Tx ring sk_buffs or xdp frames */
+ if (tx_buffer->type == IGB_TYPE_SKB)
+ dev_kfree_skb_any(tx_buffer->skb);
+ else
+ xdp_return_frame(tx_buffer->xdpf);
/* unmap skb header data */
dma_unmap_single(tx_ring->dev,
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 051/135] bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 050/135] igb: fix a use-after-free issue in igb_clean_tx_ring Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 052/135] ethtool: Fix get module eeprom fallback Greg Kroah-Hartman
` (91 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonathan Toppins, Jay Vosburgh,
Jakub Kicinski, Sasha Levin
From: Jay Vosburgh <jay.vosburgh@canonical.com>
[ Upstream commit 7a9214f3d88cfdb099f3896e102a306b316d8707 ]
The bonding ARP monitor fails to decrement send_peer_notif, the
number of peer notifications (gratuitous ARP or ND) to be sent. This
results in a continuous series of notifications.
Correct this by decrementing the counter for each notification.
Reported-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Fixes: b0929915e035 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor")
Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/
Tested-by: Jonathan Toppins <jtoppins@redhat.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/9400.1655407960@famine
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/bonding/bond_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2e75b7e8f70b..cd0d7b24f014 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3474,9 +3474,11 @@ static void bond_activebackup_arp_mon(struct bonding *bond)
if (!rtnl_trylock())
return;
- if (should_notify_peers)
+ if (should_notify_peers) {
+ bond->send_peer_notif--;
call_netdevice_notifiers(NETDEV_NOTIFY_PEERS,
bond->dev);
+ }
if (should_notify_rtnl) {
bond_slave_state_notify(bond);
bond_slave_link_notify(bond);
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 052/135] ethtool: Fix get module eeprom fallback
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 051/135] bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers Greg Kroah-Hartman
@ 2022-06-27 11:20 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 053/135] net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platforms Greg Kroah-Hartman
` (90 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:20 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ivan Vecera, Ido Schimmel,
Jakub Kicinski, Sasha Levin
From: Ivan Vecera <ivecera@redhat.com>
[ Upstream commit a3bb7b63813f674fb62bac321cdd897cc62de094 ]
Function fallback_set_params() checks if the module type returned
by a driver is ETH_MODULE_SFF_8079 and in this case it assumes
that buffer returns a concatenated content of page A0h and A2h.
The check is wrong because the correct type is ETH_MODULE_SFF_8472.
Fixes: 96d971e307cc ("ethtool: Add fallback to get_module_eeprom from netlink command")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220616160856.3623273-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ethtool/eeprom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ethtool/eeprom.c b/net/ethtool/eeprom.c
index 7e6b37a54add..1c94bb8ea03f 100644
--- a/net/ethtool/eeprom.c
+++ b/net/ethtool/eeprom.c
@@ -36,7 +36,7 @@ static int fallback_set_params(struct eeprom_req_info *request,
if (request->page)
offset = request->page * ETH_MODULE_EEPROM_PAGE_LEN + offset;
- if (modinfo->type == ETH_MODULE_SFF_8079 &&
+ if (modinfo->type == ETH_MODULE_SFF_8472 &&
request->i2c_address == 0x51)
offset += ETH_MODULE_EEPROM_PAGE_LEN * 2;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 053/135] net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platforms
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2022-06-27 11:20 ` [PATCH 5.15 052/135] ethtool: Fix get module eeprom fallback Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 054/135] drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf Greg Kroah-Hartman
` (89 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yuming Chen, Cong Wang, Peilin Ye,
Stephen Hemminger, Jakub Kicinski, Sasha Levin
From: Peilin Ye <peilin.ye@bytedance.com>
[ Upstream commit a2b1a5d40bd12b44322c2ccd40bb0ec1699708b6 ]
As reported by Yuming, currently tc always show a latency of UINT_MAX
for netem Qdisc's on 32-bit platforms:
$ tc qdisc add dev dummy0 root netem latency 100ms
$ tc qdisc show dev dummy0
qdisc netem 8001: root refcnt 2 limit 1000 delay 275s 275s
^^^^^^^^^^^^^^^^
Let us take a closer look at netem_dump():
qopt.latency = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->latency,
UINT_MAX);
qopt.latency is __u32, psched_tdiff_t is signed long,
(psched_tdiff_t)(UINT_MAX) is negative for 32-bit platforms, so
qopt.latency is always UINT_MAX.
Fix it by using psched_time_t (u64) instead.
Note: confusingly, users have two ways to specify 'latency':
1. normally, via '__u32 latency' in struct tc_netem_qopt;
2. via the TCA_NETEM_LATENCY64 attribute, which is s64.
For the second case, theoretically 'latency' could be negative. This
patch ignores that corner case, since it is broken (i.e. assigning a
negative s64 to __u32) anyways, and should be handled separately.
Thanks Ted Lin for the analysis [1] .
[1] https://github.com/raspberrypi/linux/issues/3512
Reported-by: Yuming Chen <chenyuming.junnan@bytedance.com>
Fixes: 112f9cb65643 ("netem: convert to qdisc_watchdog_schedule_ns")
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20220616234336.2443-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/sched/sch_netem.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index 0c345e43a09a..adc5407fd5d5 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -1146,9 +1146,9 @@ static int netem_dump(struct Qdisc *sch, struct sk_buff *skb)
struct tc_netem_rate rate;
struct tc_netem_slot slot;
- qopt.latency = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->latency),
+ qopt.latency = min_t(psched_time_t, PSCHED_NS2TICKS(q->latency),
UINT_MAX);
- qopt.jitter = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->jitter),
+ qopt.jitter = min_t(psched_time_t, PSCHED_NS2TICKS(q->jitter),
UINT_MAX);
qopt.limit = q->limit;
qopt.loss = q->loss;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 054/135] drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 053/135] net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platforms Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 055/135] drm/msm/dp: check core_initialized before disable interrupts at dp_display_unbind() Greg Kroah-Hartman
` (88 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Dmitry Baryshkov,
Stephen Boyd, Abhinav Kumar, Rob Clark, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit b9cc4598607cb7f7eae5c75fc1e3209cd52ff5e0 ]
of_graph_get_remote_node() returns remote device node pointer with
refcount incremented, we should use of_node_put() on it
when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 86418f90a4c1 ("drm: convert drivers to use of_graph_get_remote_node")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488473/
Link: https://lore.kernel.org/r/20220607110841.53889-1-linmq006@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c b/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c
index cdcaf470f148..97ae68182f3e 100644
--- a/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c
+++ b/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c
@@ -223,6 +223,7 @@ static int mdp4_modeset_init_intf(struct mdp4_kms *mdp4_kms,
encoder = mdp4_lcdc_encoder_init(dev, panel_node);
if (IS_ERR(encoder)) {
DRM_DEV_ERROR(dev->dev, "failed to construct LCDC encoder\n");
+ of_node_put(panel_node);
return PTR_ERR(encoder);
}
@@ -232,6 +233,7 @@ static int mdp4_modeset_init_intf(struct mdp4_kms *mdp4_kms,
connector = mdp4_lvds_connector_init(dev, panel_node, encoder);
if (IS_ERR(connector)) {
DRM_DEV_ERROR(dev->dev, "failed to initialize LVDS connector\n");
+ of_node_put(panel_node);
return PTR_ERR(connector);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 055/135] drm/msm/dp: check core_initialized before disable interrupts at dp_display_unbind()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 054/135] drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 056/135] drm/msm/dp: Drop now unused hpd_high member Greg Kroah-Hartman
` (87 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kuogee Hsieh, Stephen Boyd,
Rob Clark, Sasha Levin
From: Kuogee Hsieh <quic_khsieh@quicinc.com>
[ Upstream commit d80c3ba0ac247791a4ed7a0cd865a64906c8906a ]
During msm initialize phase, dp_display_unbind() will be called to undo
initializations had been done by dp_display_bind() previously if there is
error happen at msm_drm_bind. In this case, core_initialized flag had to
be check to make sure clocks is on before update DP controller register
to disable HPD interrupts. Otherwise system will crash due to below NOC
fatal error.
QTISECLIB [01f01a7ad]CNOC2 ERROR: ERRLOG0_LOW = 0x00061007
QTISECLIB [01f01a7ad]GEM_NOC ERROR: ERRLOG0_LOW = 0x00001007
QTISECLIB [01f0371a0]CNOC2 ERROR: ERRLOG0_HIGH = 0x00000003
QTISECLIB [01f055297]GEM_NOC ERROR: ERRLOG0_HIGH = 0x00000003
QTISECLIB [01f072beb]CNOC2 ERROR: ERRLOG1_LOW = 0x00000024
QTISECLIB [01f0914b8]GEM_NOC ERROR: ERRLOG1_LOW = 0x00000042
QTISECLIB [01f0ae639]CNOC2 ERROR: ERRLOG1_HIGH = 0x00004002
QTISECLIB [01f0cc73f]GEM_NOC ERROR: ERRLOG1_HIGH = 0x00004002
QTISECLIB [01f0ea092]CNOC2 ERROR: ERRLOG2_LOW = 0x0009020c
QTISECLIB [01f10895f]GEM_NOC ERROR: ERRLOG2_LOW = 0x0ae9020c
QTISECLIB [01f125ae1]CNOC2 ERROR: ERRLOG2_HIGH = 0x00000000
QTISECLIB [01f143be7]GEM_NOC ERROR: ERRLOG2_HIGH = 0x00000000
QTISECLIB [01f16153a]CNOC2 ERROR: ERRLOG3_LOW = 0x00000000
QTISECLIB [01f17fe07]GEM_NOC ERROR: ERRLOG3_LOW = 0x00000000
QTISECLIB [01f19cf89]CNOC2 ERROR: ERRLOG3_HIGH = 0x00000000
QTISECLIB [01f1bb08e]GEM_NOC ERROR: ERRLOG3_HIGH = 0x00000000
QTISECLIB [01f1d8a31]CNOC2 ERROR: SBM1 FAULTINSTATUS0_LOW = 0x00000002
QTISECLIB [01f1f72a4]GEM_NOC ERROR: SBM0 FAULTINSTATUS0_LOW = 0x00000001
QTISECLIB [01f21a217]CNOC3 ERROR: ERRLOG0_LOW = 0x00000006
QTISECLIB [01f23dfd3]NOC error fatal
changes in v2:
-- drop the first patch (drm/msm: enable msm irq after all initializations are done successfully at msm_drm_init()) since the problem had been fixed by other patch
Fixes: 570d3e5d28db ("drm/msm/dp: stop event kernel thread when DP unbind")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488387/
Link: https://lore.kernel.org/r/1654538139-7450-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/dp/dp_display.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 7b624191abf1..8b51a5cc3eb8 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -260,7 +260,8 @@ static void dp_display_unbind(struct device *dev, struct device *master,
struct dp_display_private, dp_display);
/* disable all HPD interrupts */
- dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false);
+ if (dp->core_initialized)
+ dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false);
kthread_stop(dp->ev_tsk);
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 056/135] drm/msm/dp: Drop now unused hpd_high member
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 055/135] drm/msm/dp: check core_initialized before disable interrupts at dp_display_unbind() Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 057/135] drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read failed Greg Kroah-Hartman
` (86 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Bjorn Andersson, Stephen Boyd,
Rob Clark, Sasha Levin
From: Bjorn Andersson <bjorn.andersson@linaro.org>
[ Upstream commit fabae667b1263216be53e0230cd3966a9a1963a4 ]
Since '8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon
Chipsets")' the hpd_high member of struct dp_usbpd has been write-only.
Let's clean up the code a little bit by removing the writes as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211106172246.2597431-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/dp/dp_display.c | 6 ------
drivers/gpu/drm/msm/dp/dp_hpd.c | 2 --
drivers/gpu/drm/msm/dp/dp_hpd.h | 2 --
3 files changed, 10 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 8b51a5cc3eb8..a66ee63253a3 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -547,11 +547,8 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
dp->hpd_state = ST_CONNECT_PENDING;
- hpd->hpd_high = 1;
-
ret = dp_display_usbpd_configure_cb(&dp->pdev->dev);
if (ret) { /* link train failed */
- hpd->hpd_high = 0;
dp->hpd_state = ST_DISCONNECTED;
if (ret == -ECONNRESET) { /* cable unplugged */
@@ -628,7 +625,6 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
/* triggered by irq_hdp with sink_count = 0 */
if (dp->link->sink_count == 0) {
dp_ctrl_off_phy(dp->ctrl);
- hpd->hpd_high = 0;
dp->core_initialized = false;
}
mutex_unlock(&dp->event_mutex);
@@ -652,8 +648,6 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
/* disable HPD plug interrupts */
dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
- hpd->hpd_high = 0;
-
/*
* We don't need separate work for disconnect as
* connect/attention interrupts are disabled
diff --git a/drivers/gpu/drm/msm/dp/dp_hpd.c b/drivers/gpu/drm/msm/dp/dp_hpd.c
index e1c90fa47411..db98a1d431eb 100644
--- a/drivers/gpu/drm/msm/dp/dp_hpd.c
+++ b/drivers/gpu/drm/msm/dp/dp_hpd.c
@@ -32,8 +32,6 @@ int dp_hpd_connect(struct dp_usbpd *dp_usbpd, bool hpd)
hpd_priv = container_of(dp_usbpd, struct dp_hpd_private,
dp_usbpd);
- dp_usbpd->hpd_high = hpd;
-
if (!hpd_priv->dp_cb || !hpd_priv->dp_cb->configure
|| !hpd_priv->dp_cb->disconnect) {
pr_err("hpd dp_cb not initialized\n");
diff --git a/drivers/gpu/drm/msm/dp/dp_hpd.h b/drivers/gpu/drm/msm/dp/dp_hpd.h
index 5bc5bb64680f..8feec5aa5027 100644
--- a/drivers/gpu/drm/msm/dp/dp_hpd.h
+++ b/drivers/gpu/drm/msm/dp/dp_hpd.h
@@ -26,7 +26,6 @@ enum plug_orientation {
* @multi_func: multi-function preferred
* @usb_config_req: request to switch to usb
* @exit_dp_mode: request exit from displayport mode
- * @hpd_high: Hot Plug Detect signal is high.
* @hpd_irq: Change in the status since last message
* @alt_mode_cfg_done: bool to specify alt mode status
* @debug_en: bool to specify debug mode
@@ -39,7 +38,6 @@ struct dp_usbpd {
bool multi_func;
bool usb_config_req;
bool exit_dp_mode;
- bool hpd_high;
bool hpd_irq;
bool alt_mode_cfg_done;
bool debug_en;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 057/135] drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read failed
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 056/135] drm/msm/dp: Drop now unused hpd_high member Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 058/135] drm/msm/dp: do not initialize phy until plugin interrupt received Greg Kroah-Hartman
` (85 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kuogee Hsieh, Stephen Boyd,
Rob Clark, Sasha Levin
From: Kuogee Hsieh <quic_khsieh@quicinc.com>
[ Upstream commit f61550b3864b9578527c28cf9c465316ac1566e1 ]
Add checking aux read/write status at both dp_link_parse_sink_count()
and dp_link_parse_sink_status_filed() to avoid long timeout delay if
dp aux read/write failed at timeout due to cable unplugged.
Changes in V4:
-- split this patch as stand alone patch
Changes in v5:
-- rebase on msm-next branch
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1638985262-2072-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/dp/dp_display.c | 12 +++++++++---
drivers/gpu/drm/msm/dp/dp_link.c | 19 ++++++++++++++-----
2 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index a66ee63253a3..32b8dbb917bf 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -712,9 +712,15 @@ static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data)
return 0;
}
- ret = dp_display_usbpd_attention_cb(&dp->pdev->dev);
- if (ret == -ECONNRESET) { /* cable unplugged */
- dp->core_initialized = false;
+ /*
+ * dp core (ahb/aux clks) must be initialized before
+ * irq_hpd be handled
+ */
+ if (dp->core_initialized) {
+ ret = dp_display_usbpd_attention_cb(&dp->pdev->dev);
+ if (ret == -ECONNRESET) { /* cable unplugged */
+ dp->core_initialized = false;
+ }
}
DRM_DEBUG_DP("hpd_state=%d\n", state);
diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
index a5bdfc5029de..d4d31e5bda07 100644
--- a/drivers/gpu/drm/msm/dp/dp_link.c
+++ b/drivers/gpu/drm/msm/dp/dp_link.c
@@ -737,18 +737,25 @@ static int dp_link_parse_sink_count(struct dp_link *dp_link)
return 0;
}
-static void dp_link_parse_sink_status_field(struct dp_link_private *link)
+static int dp_link_parse_sink_status_field(struct dp_link_private *link)
{
int len = 0;
link->prev_sink_count = link->dp_link.sink_count;
- dp_link_parse_sink_count(&link->dp_link);
+ len = dp_link_parse_sink_count(&link->dp_link);
+ if (len < 0) {
+ DRM_ERROR("DP parse sink count failed\n");
+ return len;
+ }
len = drm_dp_dpcd_read_link_status(link->aux,
link->link_status);
- if (len < DP_LINK_STATUS_SIZE)
+ if (len < DP_LINK_STATUS_SIZE) {
DRM_ERROR("DP link status read failed\n");
- dp_link_parse_request(link);
+ return len;
+ }
+
+ return dp_link_parse_request(link);
}
/**
@@ -1023,7 +1030,9 @@ int dp_link_process_request(struct dp_link *dp_link)
dp_link_reset_data(link);
- dp_link_parse_sink_status_field(link);
+ ret = dp_link_parse_sink_status_field(link);
+ if (ret)
+ return ret;
if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 058/135] drm/msm/dp: do not initialize phy until plugin interrupt received
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 057/135] drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read failed Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 059/135] drm/msm/dp: force link training for display resolution change Greg Kroah-Hartman
` (84 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kuogee Hsieh, Stephen Boyd,
Dmitry Baryshkov, Sasha Levin
From: Kuogee Hsieh <quic_khsieh@quicinc.com>
[ Upstream commit 989ebe7bc4463002c210db0010c8475797a9098f ]
Current DP drivers have regulators, clocks, irq and phy are grouped
together within a function and executed not in a symmetric manner.
This increase difficulty of code maintenance and limited code scalability.
This patch divides the driver life cycle of operation into four states,
resume (including booting up), dongle plugin, dongle unplugged and suspend.
Regulators, core clocks and irq are grouped together and enabled at resume
(or booting up) so that the DP controller is armed and ready to receive HPD
plugin interrupts. HPD plugin interrupt is generated when a dongle plugs
into DUT (device under test). Once HPD plugin interrupt is received, DP
controller will initialize phy so that dpcd read/write will function and
following link training can be proceeded successfully. DP phy will be
disabled after main link is teared down at end of unplugged HPD interrupt
handle triggered by dongle unplugged out of DUT. Finally regulators, code
clocks and irq are disabled at corresponding suspension.
Changes in V2:
-- removed unnecessary dp_ctrl NULL check
-- removed unnecessary phy init_count and power_count DRM_DEBUG_DP logs
-- remove flip parameter out of dp_ctrl_irq_enable()
-- add fixes tag
Changes in V3:
-- call dp_display_host_phy_init() instead of dp_ctrl_phy_init() at
dp_display_host_init() for eDP
Changes in V4:
-- rewording commit text to match this commit changes
Changes in V5:
-- rebase on top of msm-next branch
Changes in V6:
-- delete flip variable
Changes in V7:
-- dp_ctrl_irq_enable/disabe() merged into dp_ctrl_reset_irq_ctrl()
Changes in V8:
-- add more detail comment regrading dp phy at dp_display_host_init()
Changes in V9:
-- remove set phy_initialized to false when -ECONNRESET detected
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately
if aux read
Changes in v12:
-- move dp_display_host_phy_exit() after dp_display_host_deinit()
Changes in v13:
-- do not execute phy_init until plugged_in interrupt for edp, same as DP.
Changes in v14:
-- remove redundant dp->core_initialized = false form dp_pm_suspend.
Changes in v15:
-- remove core_initialized flag check at both host_init and host_deinit
Changes in v16:
-- remove dp_display_host_phy_exit core_initialized=false at dp_pm_suspend
Changes in v17:
-- remove core_initialized checking before execute attention_cb()
Changes in v18:
-- remove core_initialized checking at dp_pm_suspend
Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1642531648-8448-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/dp/dp_ctrl.c | 80 ++++++++------------
drivers/gpu/drm/msm/dp/dp_ctrl.h | 8 +-
drivers/gpu/drm/msm/dp/dp_display.c | 111 ++++++++++++++--------------
3 files changed, 92 insertions(+), 107 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 1992347537e6..0776b1960f21 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1348,60 +1348,44 @@ static int dp_ctrl_enable_stream_clocks(struct dp_ctrl_private *ctrl)
return ret;
}
-int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip, bool reset)
+void dp_ctrl_reset_irq_ctrl(struct dp_ctrl *dp_ctrl, bool enable)
+{
+ struct dp_ctrl_private *ctrl;
+
+ ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+ dp_catalog_ctrl_reset(ctrl->catalog);
+
+ if (enable)
+ dp_catalog_ctrl_enable_irq(ctrl->catalog, enable);
+}
+
+void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl)
{
struct dp_ctrl_private *ctrl;
struct dp_io *dp_io;
struct phy *phy;
- if (!dp_ctrl) {
- DRM_ERROR("Invalid input data\n");
- return -EINVAL;
- }
-
ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
dp_io = &ctrl->parser->io;
phy = dp_io->phy;
- ctrl->dp_ctrl.orientation = flip;
-
- if (reset)
- dp_catalog_ctrl_reset(ctrl->catalog);
-
- DRM_DEBUG_DP("flip=%d\n", flip);
dp_catalog_ctrl_phy_reset(ctrl->catalog);
phy_init(phy);
- dp_catalog_ctrl_enable_irq(ctrl->catalog, true);
-
- return 0;
}
-/**
- * dp_ctrl_host_deinit() - Uninitialize DP controller
- * @dp_ctrl: Display Port Driver data
- *
- * Perform required steps to uninitialize DP controller
- * and its resources.
- */
-void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
+void dp_ctrl_phy_exit(struct dp_ctrl *dp_ctrl)
{
struct dp_ctrl_private *ctrl;
struct dp_io *dp_io;
struct phy *phy;
- if (!dp_ctrl) {
- DRM_ERROR("Invalid input data\n");
- return;
- }
-
ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
dp_io = &ctrl->parser->io;
phy = dp_io->phy;
- dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
+ dp_catalog_ctrl_phy_reset(ctrl->catalog);
phy_exit(phy);
-
- DRM_DEBUG_DP("Host deinitialized successfully\n");
}
static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
@@ -1471,7 +1455,10 @@ static int dp_ctrl_deinitialize_mainlink(struct dp_ctrl_private *ctrl)
}
phy_power_off(phy);
+
+ /* aux channel down, reinit phy */
phy_exit(phy);
+ phy_init(phy);
return 0;
}
@@ -1877,8 +1864,14 @@ int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl)
return ret;
}
+ DRM_DEBUG_DP("Before, phy=%x init_count=%d power_on=%d\n",
+ (u32)(uintptr_t)phy, phy->init_count, phy->power_count);
+
phy_power_off(phy);
+ DRM_DEBUG_DP("After, phy=%x init_count=%d power_on=%d\n",
+ (u32)(uintptr_t)phy, phy->init_count, phy->power_count);
+
/* aux channel down, reinit phy */
phy_exit(phy);
phy_init(phy);
@@ -1887,23 +1880,6 @@ int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl)
return ret;
}
-void dp_ctrl_off_phy(struct dp_ctrl *dp_ctrl)
-{
- struct dp_ctrl_private *ctrl;
- struct dp_io *dp_io;
- struct phy *phy;
-
- ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
- dp_io = &ctrl->parser->io;
- phy = dp_io->phy;
-
- dp_catalog_ctrl_reset(ctrl->catalog);
-
- phy_exit(phy);
-
- DRM_DEBUG_DP("DP off phy done\n");
-}
-
int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
{
struct dp_ctrl_private *ctrl;
@@ -1931,10 +1907,14 @@ int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
DRM_ERROR("Failed to disable link clocks. ret=%d\n", ret);
}
+ DRM_DEBUG_DP("Before, phy=%x init_count=%d power_on=%d\n",
+ (u32)(uintptr_t)phy, phy->init_count, phy->power_count);
+
phy_power_off(phy);
- phy_exit(phy);
- DRM_DEBUG_DP("DP off done\n");
+ DRM_DEBUG_DP("After, phy=%x init_count=%d power_on=%d\n",
+ (u32)(uintptr_t)phy, phy->init_count, phy->power_count);
+
return ret;
}
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
index 2363a2df9597..2433edbc70a6 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.h
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
@@ -19,12 +19,9 @@ struct dp_ctrl {
u32 pixel_rate;
};
-int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip, bool reset);
-void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl);
int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl);
int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl);
-void dp_ctrl_off_phy(struct dp_ctrl *dp_ctrl);
int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
@@ -34,4 +31,9 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
struct dp_power *power, struct dp_catalog *catalog,
struct dp_parser *parser);
+void dp_ctrl_reset_irq_ctrl(struct dp_ctrl *dp_ctrl, bool enable);
+void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_phy_exit(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_irq_phy_exit(struct dp_ctrl *dp_ctrl);
+
#endif /* _DP_CTRL_H_ */
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 32b8dbb917bf..bbd0bf820192 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -81,6 +81,7 @@ struct dp_display_private {
/* state variables */
bool core_initialized;
+ bool phy_initialized;
bool hpd_irq_on;
bool audio_supported;
@@ -362,36 +363,45 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp)
return rc;
}
-static void dp_display_host_init(struct dp_display_private *dp, int reset)
+static void dp_display_host_phy_init(struct dp_display_private *dp)
{
- bool flip = false;
+ DRM_DEBUG_DP("core_init=%d phy_init=%d\n",
+ dp->core_initialized, dp->phy_initialized);
- DRM_DEBUG_DP("core_initialized=%d\n", dp->core_initialized);
- if (dp->core_initialized) {
- DRM_DEBUG_DP("DP core already initialized\n");
- return;
+ if (!dp->phy_initialized) {
+ dp_ctrl_phy_init(dp->ctrl);
+ dp->phy_initialized = true;
}
+}
+
+static void dp_display_host_phy_exit(struct dp_display_private *dp)
+{
+ DRM_DEBUG_DP("core_init=%d phy_init=%d\n",
+ dp->core_initialized, dp->phy_initialized);
- if (dp->usbpd->orientation == ORIENTATION_CC2)
- flip = true;
+ if (dp->phy_initialized) {
+ dp_ctrl_phy_exit(dp->ctrl);
+ dp->phy_initialized = false;
+ }
+}
+
+static void dp_display_host_init(struct dp_display_private *dp)
+{
+ DRM_DEBUG_DP("core_initialized=%d\n", dp->core_initialized);
- dp_power_init(dp->power, flip);
- dp_ctrl_host_init(dp->ctrl, flip, reset);
+ dp_power_init(dp->power, false);
+ dp_ctrl_reset_irq_ctrl(dp->ctrl, true);
dp_aux_init(dp->aux);
dp->core_initialized = true;
}
static void dp_display_host_deinit(struct dp_display_private *dp)
{
- if (!dp->core_initialized) {
- DRM_DEBUG_DP("DP core not initialized\n");
- return;
- }
+ DRM_DEBUG_DP("core_initialized=%d\n", dp->core_initialized);
- dp_ctrl_host_deinit(dp->ctrl);
+ dp_ctrl_reset_irq_ctrl(dp->ctrl, false);
dp_aux_deinit(dp->aux);
dp_power_deinit(dp->power);
-
dp->core_initialized = false;
}
@@ -409,7 +419,7 @@ static int dp_display_usbpd_configure_cb(struct device *dev)
dp = container_of(g_dp_display,
struct dp_display_private, dp_display);
- dp_display_host_init(dp, false);
+ dp_display_host_phy_init(dp);
rc = dp_display_process_hpd_high(dp);
end:
@@ -550,11 +560,6 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
ret = dp_display_usbpd_configure_cb(&dp->pdev->dev);
if (ret) { /* link train failed */
dp->hpd_state = ST_DISCONNECTED;
-
- if (ret == -ECONNRESET) { /* cable unplugged */
- dp->core_initialized = false;
- }
-
} else {
/* start sentinel checking in case of missing uevent */
dp_add_event(dp, EV_CONNECT_PENDING_TIMEOUT, 0, tout);
@@ -624,8 +629,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
if (state == ST_DISCONNECTED) {
/* triggered by irq_hdp with sink_count = 0 */
if (dp->link->sink_count == 0) {
- dp_ctrl_off_phy(dp->ctrl);
- dp->core_initialized = false;
+ dp_display_host_phy_exit(dp);
}
mutex_unlock(&dp->event_mutex);
return 0;
@@ -687,7 +691,6 @@ static int dp_disconnect_pending_timeout(struct dp_display_private *dp, u32 data
static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data)
{
u32 state;
- int ret;
mutex_lock(&dp->event_mutex);
@@ -712,16 +715,8 @@ static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data)
return 0;
}
- /*
- * dp core (ahb/aux clks) must be initialized before
- * irq_hpd be handled
- */
- if (dp->core_initialized) {
- ret = dp_display_usbpd_attention_cb(&dp->pdev->dev);
- if (ret == -ECONNRESET) { /* cable unplugged */
- dp->core_initialized = false;
- }
- }
+ dp_display_usbpd_attention_cb(&dp->pdev->dev);
+
DRM_DEBUG_DP("hpd_state=%d\n", state);
mutex_unlock(&dp->event_mutex);
@@ -916,12 +911,19 @@ static int dp_display_disable(struct dp_display_private *dp, u32 data)
dp_display->audio_enabled = false;
- /* triggered by irq_hpd with sink_count = 0 */
if (dp->link->sink_count == 0) {
+ /*
+ * irq_hpd with sink_count = 0
+ * hdmi unplugged out of dongle
+ */
dp_ctrl_off_link_stream(dp->ctrl);
} else {
+ /*
+ * unplugged interrupt
+ * dongle unplugged out of DUT
+ */
dp_ctrl_off(dp->ctrl);
- dp->core_initialized = false;
+ dp_display_host_phy_exit(dp);
}
dp_display->power_on = false;
@@ -1051,7 +1053,7 @@ void msm_dp_snapshot(struct msm_disp_state *disp_state, struct msm_dp *dp)
static void dp_display_config_hpd(struct dp_display_private *dp)
{
- dp_display_host_init(dp, true);
+ dp_display_host_init(dp);
dp_catalog_ctrl_hpd_config(dp->catalog);
/* Enable interrupt first time
@@ -1318,20 +1320,23 @@ static int dp_pm_resume(struct device *dev)
dp->hpd_state = ST_DISCONNECTED;
/* turn on dp ctrl/phy */
- dp_display_host_init(dp, true);
+ dp_display_host_init(dp);
dp_catalog_ctrl_hpd_config(dp->catalog);
- /*
- * set sink to normal operation mode -- D0
- * before dpcd read
- */
- dp_link_psm_config(dp->link, &dp->panel->link_info, false);
if (dp_catalog_link_is_connected(dp->catalog)) {
+ /*
+ * set sink to normal operation mode -- D0
+ * before dpcd read
+ */
+ dp_display_host_phy_init(dp);
+ dp_link_psm_config(dp->link, &dp->panel->link_info, false);
sink_count = drm_dp_read_sink_count(dp->aux);
if (sink_count < 0)
sink_count = 0;
+
+ dp_display_host_phy_exit(dp);
}
dp->link->sink_count = sink_count;
@@ -1370,18 +1375,16 @@ static int dp_pm_suspend(struct device *dev)
DRM_DEBUG_DP("Before, core_inited=%d power_on=%d\n",
dp->core_initialized, dp_display->power_on);
- if (dp->core_initialized == true) {
- /* mainlink enabled */
- if (dp_power_clk_status(dp->power, DP_CTRL_PM))
- dp_ctrl_off_link_stream(dp->ctrl);
+ /* mainlink enabled */
+ if (dp_power_clk_status(dp->power, DP_CTRL_PM))
+ dp_ctrl_off_link_stream(dp->ctrl);
- dp_display_host_deinit(dp);
- }
-
- dp->hpd_state = ST_SUSPENDED;
+ dp_display_host_phy_exit(dp);
/* host_init will be called at pm_resume */
- dp->core_initialized = false;
+ dp_display_host_deinit(dp);
+
+ dp->hpd_state = ST_SUSPENDED;
DRM_DEBUG_DP("After, core_inited=%d power_on=%d\n",
dp->core_initialized, dp_display->power_on);
@@ -1538,7 +1541,7 @@ int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
state = dp_display->hpd_state;
if (state == ST_DISPLAY_OFF)
- dp_display_host_init(dp_display, true);
+ dp_display_host_phy_init(dp_display);
dp_display_enable(dp_display, 0);
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 059/135] drm/msm/dp: force link training for display resolution change
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 058/135] drm/msm/dp: do not initialize phy until plugin interrupt received Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` Greg Kroah-Hartman
` (83 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kuogee Hsieh, Stephen Boyd,
Rob Clark, Sasha Levin
From: Kuogee Hsieh <quic_khsieh@quicinc.com>
[ Upstream commit a6e2af64a79afa7f1b29375b5231e840a84bb845 ]
Display resolution change is implemented through drm modeset. Older
modeset (resolution) has to be disabled first before newer modeset
(resolution) can be enabled. Display disable will turn off both
pixel clock and main link clock so that main link have to be
re-trained during display enable to have new video stream flow
again. At current implementation, display enable function manually
kicks up irq_hpd_handle which will read panel link status and start
link training if link status is not in sync state.
However, there is rare case that a particular panel links status keep
staying in sync for some period of time after main link had been shut
down previously at display disabled. In this case, main link retraining
will not be executed by irq_hdp_handle(). Hence video stream of newer
display resolution will fail to be transmitted to panel due to main
link is not in sync between host and panel.
This patch will bypass irq_hpd_handle() in favor of directly call
dp_ctrl_on_stream() to always perform link training in regardless of
main link status. So that no unexpected exception resolution change
failure cases will happen. Also this implementation are more efficient
than manual kicking off irq_hpd_handle function.
Changes in v2:
-- set force_link_train flag on DP only (is_edp == false)
Changes in v3:
-- revise commit text
-- add Fixes tag
Changes in v4:
-- revise commit text
Changes in v5:
-- fix spelling at commit text
Changes in v6:
-- split dp_ctrl_on_stream() for phy test case
-- revise commit text for modeset
Changes in v7:
-- drop 0 assignment at local variable (ret = 0)
Changes in v8:
-- add patch to remove pixel_rate from dp_ctrl
Changes in v9:
-- forward declare dp_ctrl_on_stream_phy_test_report()
Fixes: 62671d2ef24b ("drm/msm/dp: fixes wrong connection state caused by failure of link train")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489895/
Link: https://lore.kernel.org/r/1655411200-7255-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/dp/dp_ctrl.c | 33 ++++++++++++++++++++++-------
drivers/gpu/drm/msm/dp/dp_ctrl.h | 2 +-
drivers/gpu/drm/msm/dp/dp_display.c | 13 ++++++------
3 files changed, 32 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 0776b1960f21..afffdad0ebf9 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1488,6 +1488,8 @@ static int dp_ctrl_link_maintenance(struct dp_ctrl_private *ctrl)
return ret;
}
+static int dp_ctrl_on_stream_phy_test_report(struct dp_ctrl *dp_ctrl);
+
static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private *ctrl)
{
int ret = 0;
@@ -1510,7 +1512,7 @@ static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private *ctrl)
ret = dp_ctrl_on_link(&ctrl->dp_ctrl);
if (!ret)
- ret = dp_ctrl_on_stream(&ctrl->dp_ctrl);
+ ret = dp_ctrl_on_stream_phy_test_report(&ctrl->dp_ctrl);
else
DRM_ERROR("failed to enable DP link controller\n");
@@ -1765,7 +1767,27 @@ static int dp_ctrl_link_retrain(struct dp_ctrl_private *ctrl)
return dp_ctrl_setup_main_link(ctrl, &training_step);
}
-int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl)
+static int dp_ctrl_on_stream_phy_test_report(struct dp_ctrl *dp_ctrl)
+{
+ int ret;
+ struct dp_ctrl_private *ctrl;
+
+ ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+ ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
+
+ ret = dp_ctrl_enable_stream_clocks(ctrl);
+ if (ret) {
+ DRM_ERROR("Failed to start pixel clocks. ret=%d\n", ret);
+ return ret;
+ }
+
+ dp_ctrl_send_phy_test_pattern(ctrl);
+
+ return 0;
+}
+
+int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl, bool force_link_train)
{
int ret = 0;
bool mainlink_ready = false;
@@ -1796,12 +1818,7 @@ int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl)
goto end;
}
- if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
- dp_ctrl_send_phy_test_pattern(ctrl);
- return 0;
- }
-
- if (!dp_ctrl_channel_eq_ok(ctrl))
+ if (force_link_train || !dp_ctrl_channel_eq_ok(ctrl))
dp_ctrl_link_retrain(ctrl);
/* stop txing train pattern to end link training */
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
index 2433edbc70a6..dcc7af21a5f0 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.h
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
@@ -20,7 +20,7 @@ struct dp_ctrl {
};
int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl);
-int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl);
+int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl, bool force_link_train);
int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl);
int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index bbd0bf820192..b141ccb527b0 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -865,7 +865,7 @@ static int dp_display_enable(struct dp_display_private *dp, u32 data)
return 0;
}
- rc = dp_ctrl_on_stream(dp->ctrl);
+ rc = dp_ctrl_on_stream(dp->ctrl, data);
if (!rc)
dp_display->power_on = true;
@@ -1512,6 +1512,7 @@ int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
int rc = 0;
struct dp_display_private *dp_display;
u32 state;
+ bool force_link_train = false;
dp_display = container_of(dp, struct dp_display_private, dp_display);
if (!dp_display->dp_mode.drm_mode.clock) {
@@ -1540,10 +1541,12 @@ int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
state = dp_display->hpd_state;
- if (state == ST_DISPLAY_OFF)
+ if (state == ST_DISPLAY_OFF) {
dp_display_host_phy_init(dp_display);
+ force_link_train = true;
+ }
- dp_display_enable(dp_display, 0);
+ dp_display_enable(dp_display, force_link_train);
rc = dp_display_post_enable(dp);
if (rc) {
@@ -1552,10 +1555,6 @@ int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
dp_display_unprepare(dp);
}
- /* manual kick off plug event to train link */
- if (state == ST_DISPLAY_OFF)
- dp_add_event(dp_display, EV_IRQ_HPD_INT, 0, 0);
-
/* completed connection */
dp_display->hpd_state = ST_CONNECTED;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 060/135] perf arm-spe: Dont set data source if its not a memory operation
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:20 ` [PATCH 5.15 002/135] random: quiet urandom warning ratelimit suppression message Greg Kroah-Hartman
` (141 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ali Saidi, German Gomez, Leo Yan,
Alexander Shishkin, Andrew Kilroy, Benjamin Herrenschmidt,
James Clark, Jiri Olsa, John Garry, Kajol Jain, Li Huafei,
linux-arm-kernel, Mark Rutland, Mathieu Poirier, Namhyung Kim,
Nick Forrington, Peter Zijlstra, Will Deacon,
Arnaldo Carvalho de Melo, Sasha Levin
From: Leo Yan <leo.yan@linaro.org>
[ Upstream commit 51ba539f5bdb5a8cc7b1dedd5e73ac54564a7602 ]
Except for memory load and store operations, ARM SPE records also can
support other operation types, bug when set the data source field the
current code assumes a record is a either load operation or store
operation, this leads to wrongly synthesize memory samples.
This patch strictly checks the record operation type, it only sets data
source only for the operation types ARM_SPE_LD and ARM_SPE_ST,
otherwise, returns zero for data source. Therefore, we can synthesize
memory samples only when data source is a non-zero value, the function
arm_spe__is_memory_event() is useless and removed.
Fixes: e55ed3423c1bb29f ("perf arm-spe: Synthesize memory event")
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Reviewed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: alisaidi@amazon.com
Cc: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Forrington <nick.forrington@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20220517020326.18580-5-alisaidi@amazon.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/util/arm-spe.c | 22 ++++++++--------------
1 file changed, 8 insertions(+), 14 deletions(-)
diff --git a/tools/perf/util/arm-spe.c b/tools/perf/util/arm-spe.c
index 235549bb28b9..569e1b8ad0ab 100644
--- a/tools/perf/util/arm-spe.c
+++ b/tools/perf/util/arm-spe.c
@@ -312,26 +312,16 @@ static int arm_spe__synth_branch_sample(struct arm_spe_queue *speq,
return arm_spe_deliver_synth_event(spe, speq, event, &sample);
}
-#define SPE_MEM_TYPE (ARM_SPE_L1D_ACCESS | ARM_SPE_L1D_MISS | \
- ARM_SPE_LLC_ACCESS | ARM_SPE_LLC_MISS | \
- ARM_SPE_REMOTE_ACCESS)
-
-static bool arm_spe__is_memory_event(enum arm_spe_sample_type type)
-{
- if (type & SPE_MEM_TYPE)
- return true;
-
- return false;
-}
-
static u64 arm_spe__synth_data_source(const struct arm_spe_record *record)
{
union perf_mem_data_src data_src = { 0 };
if (record->op == ARM_SPE_LD)
data_src.mem_op = PERF_MEM_OP_LOAD;
- else
+ else if (record->op == ARM_SPE_ST)
data_src.mem_op = PERF_MEM_OP_STORE;
+ else
+ return 0;
if (record->type & (ARM_SPE_LLC_ACCESS | ARM_SPE_LLC_MISS)) {
data_src.mem_lvl = PERF_MEM_LVL_L3;
@@ -435,7 +425,11 @@ static int arm_spe_sample(struct arm_spe_queue *speq)
return err;
}
- if (spe->sample_memory && arm_spe__is_memory_event(record->type)) {
+ /*
+ * When data_src is zero it means the record is not a memory operation,
+ * skip to synthesize memory sample for this case.
+ */
+ if (spe->sample_memory && data_src) {
err = arm_spe__synth_mem_sample(speq, spe->memory_id, data_src);
if (err)
return err;
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 060/135] perf arm-spe: Dont set data source if its not a memory operation
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
0 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ali Saidi, German Gomez, Leo Yan,
Alexander Shishkin, Andrew Kilroy, Benjamin Herrenschmidt,
James Clark, Jiri Olsa, John Garry, Kajol Jain, Li Huafei,
linux-arm-kernel, Mark Rutland, Mathieu Poirier, Namhyung Kim,
Nick Forrington, Peter Zijlstra, Will Deacon,
Arnaldo Carvalho de Melo, Sasha Levin
From: Leo Yan <leo.yan@linaro.org>
[ Upstream commit 51ba539f5bdb5a8cc7b1dedd5e73ac54564a7602 ]
Except for memory load and store operations, ARM SPE records also can
support other operation types, bug when set the data source field the
current code assumes a record is a either load operation or store
operation, this leads to wrongly synthesize memory samples.
This patch strictly checks the record operation type, it only sets data
source only for the operation types ARM_SPE_LD and ARM_SPE_ST,
otherwise, returns zero for data source. Therefore, we can synthesize
memory samples only when data source is a non-zero value, the function
arm_spe__is_memory_event() is useless and removed.
Fixes: e55ed3423c1bb29f ("perf arm-spe: Synthesize memory event")
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Reviewed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: alisaidi@amazon.com
Cc: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Forrington <nick.forrington@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20220517020326.18580-5-alisaidi@amazon.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/util/arm-spe.c | 22 ++++++++--------------
1 file changed, 8 insertions(+), 14 deletions(-)
diff --git a/tools/perf/util/arm-spe.c b/tools/perf/util/arm-spe.c
index 235549bb28b9..569e1b8ad0ab 100644
--- a/tools/perf/util/arm-spe.c
+++ b/tools/perf/util/arm-spe.c
@@ -312,26 +312,16 @@ static int arm_spe__synth_branch_sample(struct arm_spe_queue *speq,
return arm_spe_deliver_synth_event(spe, speq, event, &sample);
}
-#define SPE_MEM_TYPE (ARM_SPE_L1D_ACCESS | ARM_SPE_L1D_MISS | \
- ARM_SPE_LLC_ACCESS | ARM_SPE_LLC_MISS | \
- ARM_SPE_REMOTE_ACCESS)
-
-static bool arm_spe__is_memory_event(enum arm_spe_sample_type type)
-{
- if (type & SPE_MEM_TYPE)
- return true;
-
- return false;
-}
-
static u64 arm_spe__synth_data_source(const struct arm_spe_record *record)
{
union perf_mem_data_src data_src = { 0 };
if (record->op == ARM_SPE_LD)
data_src.mem_op = PERF_MEM_OP_LOAD;
- else
+ else if (record->op == ARM_SPE_ST)
data_src.mem_op = PERF_MEM_OP_STORE;
+ else
+ return 0;
if (record->type & (ARM_SPE_LLC_ACCESS | ARM_SPE_LLC_MISS)) {
data_src.mem_lvl = PERF_MEM_LVL_L3;
@@ -435,7 +425,11 @@ static int arm_spe_sample(struct arm_spe_queue *speq)
return err;
}
- if (spe->sample_memory && arm_spe__is_memory_event(record->type)) {
+ /*
+ * When data_src is zero it means the record is not a memory operation,
+ * skip to synthesize memory sample for this case.
+ */
+ if (spe->sample_memory && data_src) {
err = arm_spe__synth_mem_sample(speq, spe->memory_id, data_src);
if (err)
return err;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread
* [PATCH 5.15 061/135] erspan: do not assume transport header is always set
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2022-06-27 11:21 ` Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 062/135] net/tls: fix tls_sk_proto_close executed repeatedly Greg Kroah-Hartman
` (81 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot, Eric Dumazet, William Tu,
David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 301bd140ed0b24f0da660874c7e8a47dad8c8222 ]
Rewrite tests in ip6erspan_tunnel_xmit() and
erspan_fb_xmit() to not assume transport header is set.
syzbot reported:
WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 skb_transport_header include/linux/skbuff.h:2911 [inline]
WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963
Modules linked in:
CPU: 0 PID: 1350 Comm: aoe_tx0 Not tainted 5.19.0-rc2-syzkaller-00160-g274295c6e53f #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:skb_transport_header include/linux/skbuff.h:2911 [inline]
RIP: 0010:ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963
Code: 0f 47 f0 40 88 b5 7f fe ff ff e8 8c 16 4b f9 89 de bf ff ff ff ff e8 a0 12 4b f9 66 83 fb ff 0f 85 1d f1 ff ff e8 71 16 4b f9 <0f> 0b e9 43 f0 ff ff e8 65 16 4b f9 48 8d 85 30 ff ff ff ba 60 00
RSP: 0018:ffffc90005daf910 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000
RDX: ffff88801f032100 RSI: ffffffff882e8d3f RDI: 0000000000000003
RBP: ffffc90005dafab8 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000000 R12: ffff888024f21d40
R13: 000000000000a288 R14: 00000000000000b0 R15: ffff888025a2e000
FS: 0000000000000000(0000) GS:ffff88802c800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2e425000 CR3: 000000006d099000 CR4: 0000000000152ef0
Call Trace:
<TASK>
__netdev_start_xmit include/linux/netdevice.h:4805 [inline]
netdev_start_xmit include/linux/netdevice.h:4819 [inline]
xmit_one net/core/dev.c:3588 [inline]
dev_hard_start_xmit+0x188/0x880 net/core/dev.c:3604
sch_direct_xmit+0x19f/0xbe0 net/sched/sch_generic.c:342
__dev_xmit_skb net/core/dev.c:3815 [inline]
__dev_queue_xmit+0x14a1/0x3900 net/core/dev.c:4219
dev_queue_xmit include/linux/netdevice.h:2994 [inline]
tx+0x6a/0xc0 drivers/block/aoe/aoenet.c:63
kthread+0x1e7/0x3b0 drivers/block/aoe/aoecmd.c:1229
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>
Fixes: d5db21a3e697 ("erspan: auto detect truncated ipv6 packets.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/ip_gre.c | 15 ++++++++++-----
net/ipv6/ip6_gre.c | 15 ++++++++++-----
2 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index f23528c77539..fc74a3e3b3e1 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -524,7 +524,6 @@ static void erspan_fb_xmit(struct sk_buff *skb, struct net_device *dev)
int tunnel_hlen;
int version;
int nhoff;
- int thoff;
tun_info = skb_tunnel_info(skb);
if (unlikely(!tun_info || !(tun_info->mode & IP_TUNNEL_INFO_TX) ||
@@ -558,10 +557,16 @@ static void erspan_fb_xmit(struct sk_buff *skb, struct net_device *dev)
(ntohs(ip_hdr(skb)->tot_len) > skb->len - nhoff))
truncate = true;
- thoff = skb_transport_header(skb) - skb_mac_header(skb);
- if (skb->protocol == htons(ETH_P_IPV6) &&
- (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff))
- truncate = true;
+ if (skb->protocol == htons(ETH_P_IPV6)) {
+ int thoff;
+
+ if (skb_transport_header_was_set(skb))
+ thoff = skb_transport_header(skb) - skb_mac_header(skb);
+ else
+ thoff = nhoff + sizeof(struct ipv6hdr);
+ if (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff)
+ truncate = true;
+ }
if (version == 1) {
erspan_build_header(skb, ntohl(tunnel_id_to_key32(key->tun_id)),
diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index a817ac6d9759..70ef4d4ebff4 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -944,7 +944,6 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb,
__be16 proto;
__u32 mtu;
int nhoff;
- int thoff;
if (!pskb_inet_may_pull(skb))
goto tx_err;
@@ -965,10 +964,16 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb,
(ntohs(ip_hdr(skb)->tot_len) > skb->len - nhoff))
truncate = true;
- thoff = skb_transport_header(skb) - skb_mac_header(skb);
- if (skb->protocol == htons(ETH_P_IPV6) &&
- (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff))
- truncate = true;
+ if (skb->protocol == htons(ETH_P_IPV6)) {
+ int thoff;
+
+ if (skb_transport_header_was_set(skb))
+ thoff = skb_transport_header(skb) - skb_mac_header(skb);
+ else
+ thoff = nhoff + sizeof(struct ipv6hdr);
+ if (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff)
+ truncate = true;
+ }
if (skb_cow_head(skb, dev->needed_headroom ?: t->hlen))
goto tx_err;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 062/135] net/tls: fix tls_sk_proto_close executed repeatedly
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 061/135] erspan: do not assume transport header is always set Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 063/135] udmabuf: add back sanity check Greg Kroah-Hartman
` (80 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+29c3c12f3214b85ad081,
Ziyang Xuan, David S. Miller, Sasha Levin
From: Ziyang Xuan <william.xuanziyang@huawei.com>
[ Upstream commit 69135c572d1f84261a6de2a1268513a7e71753e2 ]
After setting the sock ktls, update ctx->sk_proto to sock->sk_prot by
tls_update(), so now ctx->sk_proto->close is tls_sk_proto_close(). When
close the sock, tls_sk_proto_close() is called for sock->sk_prot->close
is tls_sk_proto_close(). But ctx->sk_proto->close() will be executed later
in tls_sk_proto_close(). Thus tls_sk_proto_close() executed repeatedly
occurred. That will trigger the following bug.
=================================================================
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:tls_sk_proto_close+0xd8/0xaf0 net/tls/tls_main.c:306
Call Trace:
<TASK>
tls_sk_proto_close+0x356/0xaf0 net/tls/tls_main.c:329
inet_release+0x12e/0x280 net/ipv4/af_inet.c:428
__sock_release+0xcd/0x280 net/socket.c:650
sock_close+0x18/0x20 net/socket.c:1365
Updating a proto which is same with sock->sk_prot is incorrect. Add proto
and sock->sk_prot equality check at the head of tls_update() to fix it.
Fixes: 95fa145479fb ("bpf: sockmap/tls, close can race with map free")
Reported-by: syzbot+29c3c12f3214b85ad081@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/tls/tls_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c
index 9aac9c60d786..057c1af6182a 100644
--- a/net/tls/tls_main.c
+++ b/net/tls/tls_main.c
@@ -790,6 +790,9 @@ static void tls_update(struct sock *sk, struct proto *p,
{
struct tls_context *ctx;
+ if (sk->sk_prot == p)
+ return;
+
ctx = tls_get_ctx(sk);
if (likely(ctx)) {
ctx->sk_write_space = write_space;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 063/135] udmabuf: add back sanity check
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 062/135] net/tls: fix tls_sk_proto_close executed repeatedly Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 064/135] selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh Greg Kroah-Hartman
` (79 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, zdi-disclosures, Linus Torvalds,
Gerd Hoffmann, Linus Torvalds, Sasha Levin
From: Gerd Hoffmann <kraxel@redhat.com>
[ Upstream commit 05b252cccb2e5c3f56119d25de684b4f810ba40a ]
Check vm_fault->pgoff before using it. When we removed the warning, we
also removed the check.
Fixes: 7b26e4e2119d ("udmabuf: drop WARN_ON() check.")
Reported-by: zdi-disclosures@trendmicro.com
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma-buf/udmabuf.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c
index e7330684d3b8..9631f2fd2faf 100644
--- a/drivers/dma-buf/udmabuf.c
+++ b/drivers/dma-buf/udmabuf.c
@@ -32,8 +32,11 @@ static vm_fault_t udmabuf_vm_fault(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
struct udmabuf *ubuf = vma->vm_private_data;
+ pgoff_t pgoff = vmf->pgoff;
- vmf->page = ubuf->pages[vmf->pgoff];
+ if (pgoff >= ubuf->pagecount)
+ return VM_FAULT_SIGBUS;
+ vmf->page = ubuf->pages[pgoff];
get_page(vmf->page);
return 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 064/135] selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 063/135] udmabuf: add back sanity check Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 065/135] xen-blkfront: Handle NULL gendisk Greg Kroah-Hartman
` (78 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Jie2x Zhou,
Pablo Neira Ayuso, Sasha Levin
From: Jie2x Zhou <jie2x.zhou@intel.com>
[ Upstream commit 5d79d8af8dec58bf709b3124d09d9572edd9c617 ]
Before change:
make -C netfilter
TEST: performance
net,port [SKIP]
perf not supported
port,net [SKIP]
perf not supported
net6,port [SKIP]
perf not supported
port,proto [SKIP]
perf not supported
net6,port,mac [SKIP]
perf not supported
net6,port,mac,proto [SKIP]
perf not supported
net,mac [SKIP]
perf not supported
After change:
net,mac [ OK ]
baseline (drop from netdev hook): 2061098pps
baseline hash (non-ranged entries): 1606741pps
baseline rbtree (match on first field only): 1191607pps
set with 1000 full, ranged entries: 1639119pps
ok 8 selftests: netfilter: nft_concat_range.sh
Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/netfilter/nft_concat_range.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/netfilter/nft_concat_range.sh b/tools/testing/selftests/netfilter/nft_concat_range.sh
index b5eef5ffb58e..af3461cb5c40 100755
--- a/tools/testing/selftests/netfilter/nft_concat_range.sh
+++ b/tools/testing/selftests/netfilter/nft_concat_range.sh
@@ -31,7 +31,7 @@ BUGS="flush_remove_add reload"
# List of possible paths to pktgen script from kernel tree for performance tests
PKTGEN_SCRIPT_PATHS="
- ../../../samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
+ ../../../../samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
pktgen/pktgen_bench_xmit_mode_netif_receive.sh"
# Definition of set types:
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 065/135] xen-blkfront: Handle NULL gendisk
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 064/135] selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 066/135] x86/xen: Remove undefined behavior in setup_features() Greg Kroah-Hartman
` (77 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Marczykowski-Górecki,
Jason Andryuk, Juergen Gross, Sasha Levin
From: Jason Andryuk <jandryuk@gmail.com>
[ Upstream commit f9710c357e5bbf64d7ce45ba0bc75a52222491c1 ]
When a VBD is not fully created and then closed, the kernel can have a
NULL pointer dereference:
The reproducer is trivial:
[user@dom0 ~]$ sudo xl block-attach work backend=sys-usb vdev=xvdi target=/dev/sdz
[user@dom0 ~]$ xl block-list work
Vdev BE handle state evt-ch ring-ref BE-path
51712 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51712
51728 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51728
51744 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51744
51760 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51760
51840 3 241 3 -1 -1 /local/domain/3/backend/vbd/241/51840
^ note state, the /dev/sdz doesn't exist in the backend
[user@dom0 ~]$ sudo xl block-detach work xvdi
[user@dom0 ~]$ xl block-list work
Vdev BE handle state evt-ch ring-ref BE-path
work is an invalid domain identifier
And its console has:
BUG: kernel NULL pointer dereference, address: 0000000000000050
PGD 80000000edebb067 P4D 80000000edebb067 PUD edec2067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 52 Comm: xenwatch Not tainted 5.16.18-2.43.fc32.qubes.x86_64 #1
RIP: 0010:blk_mq_stop_hw_queues+0x5/0x40
Code: 00 48 83 e0 fd 83 c3 01 48 89 85 a8 00 00 00 41 39 5c 24 50 77 c0 5b 5d 41 5c 41 5d c3 c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <8b> 47 50 85 c0 74 32 41 54 49 89 fc 55 53 31 db 49 8b 44 24 48 48
RSP: 0018:ffffc90000bcfe98 EFLAGS: 00010293
RAX: ffffffffc0008370 RBX: 0000000000000005 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000
RBP: ffff88800775f000 R08: 0000000000000001 R09: ffff888006e620b8
R10: ffff888006e620b0 R11: f000000000000000 R12: ffff8880bff39000
R13: ffff8880bff39000 R14: 0000000000000000 R15: ffff88800604be00
FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000050 CR3: 00000000e932e002 CR4: 00000000003706e0
Call Trace:
<TASK>
blkback_changed+0x95/0x137 [xen_blkfront]
? read_reply+0x160/0x160
xenwatch_thread+0xc0/0x1a0
? do_wait_intr_irq+0xa0/0xa0
kthread+0x16b/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
</TASK>
Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device snd_timer snd soundcore ipt_REJECT nf_reject_ipv4 xt_state xt_conntrack nft_counter nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_compat nf_tables nfnetlink intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel xen_netfront pcspkr xen_scsiback target_core_mod xen_netback xen_privcmd xen_gntdev xen_gntalloc xen_blkback xen_evtchn ipmi_devintf ipmi_msghandler fuse bpf_preload ip_tables overlay xen_blkfront
CR2: 0000000000000050
---[ end trace 7bc9597fd06ae89d ]---
RIP: 0010:blk_mq_stop_hw_queues+0x5/0x40
Code: 00 48 83 e0 fd 83 c3 01 48 89 85 a8 00 00 00 41 39 5c 24 50 77 c0 5b 5d 41 5c 41 5d c3 c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <8b> 47 50 85 c0 74 32 41 54 49 89 fc 55 53 31 db 49 8b 44 24 48 48
RSP: 0018:ffffc90000bcfe98 EFLAGS: 00010293
RAX: ffffffffc0008370 RBX: 0000000000000005 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000
RBP: ffff88800775f000 R08: 0000000000000001 R09: ffff888006e620b8
R10: ffff888006e620b0 R11: f000000000000000 R12: ffff8880bff39000
R13: ffff8880bff39000 R14: 0000000000000000 R15: ffff88800604be00
FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000050 CR3: 00000000e932e002 CR4: 00000000003706e0
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
info->rq and info->gd are only set in blkfront_connect(), which is
called for state 4 (XenbusStateConnected). Guard against using NULL
variables in blkfront_closing() to avoid the issue.
The rest of blkfront_closing looks okay. If info->nr_rings is 0, then
for_each_rinfo won't do anything.
blkfront_remove also needs to check for non-NULL pointers before
cleaning up the gendisk and request queue.
Fixes: 05d69d950d9d "xen-blkfront: sanitize the removal state machine"
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220601195341.28581-1-jandryuk@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/xen-blkfront.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 390817cf1221..d7a9bf43fb32 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -2140,9 +2140,11 @@ static void blkfront_closing(struct blkfront_info *info)
return;
/* No more blkif_request(). */
- blk_mq_stop_hw_queues(info->rq);
- blk_mark_disk_dead(info->gd);
- set_capacity(info->gd, 0);
+ if (info->rq && info->gd) {
+ blk_mq_stop_hw_queues(info->rq);
+ blk_mark_disk_dead(info->gd);
+ set_capacity(info->gd, 0);
+ }
for_each_rinfo(info, rinfo, i) {
/* No more gnttab callback work. */
@@ -2478,16 +2480,19 @@ static int blkfront_remove(struct xenbus_device *xbdev)
dev_dbg(&xbdev->dev, "%s removed", xbdev->nodename);
- del_gendisk(info->gd);
+ if (info->gd)
+ del_gendisk(info->gd);
mutex_lock(&blkfront_mutex);
list_del(&info->info_list);
mutex_unlock(&blkfront_mutex);
blkif_free(info, 0);
- xlbd_release_minors(info->gd->first_minor, info->gd->minors);
- blk_cleanup_disk(info->gd);
- blk_mq_free_tag_set(&info->tag_set);
+ if (info->gd) {
+ xlbd_release_minors(info->gd->first_minor, info->gd->minors);
+ blk_cleanup_disk(info->gd);
+ blk_mq_free_tag_set(&info->tag_set);
+ }
kfree(info);
return 0;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 066/135] x86/xen: Remove undefined behavior in setup_features()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 065/135] xen-blkfront: Handle NULL gendisk Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 067/135] MIPS: Remove repetitive increase irq_err_count Greg Kroah-Hartman
` (76 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Julien Grall, Juergen Gross, Sasha Levin
From: Julien Grall <jgrall@amazon.com>
[ Upstream commit ecb6237fa397b7b810d798ad19322eca466dbab1 ]
1 << 31 is undefined. So switch to 1U << 31.
Fixes: 5ead97c84fa7 ("xen: Core Xen implementation")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220617103037.57828-1-julien@xen.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/xen/features.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/xen/features.c b/drivers/xen/features.c
index 7b591443833c..87f1828d40d5 100644
--- a/drivers/xen/features.c
+++ b/drivers/xen/features.c
@@ -42,7 +42,7 @@ void xen_setup_features(void)
if (HYPERVISOR_xen_version(XENVER_get_features, &fi) < 0)
break;
for (j = 0; j < 32; j++)
- xen_features[i * 32 + j] = !!(fi.submap & 1<<j);
+ xen_features[i * 32 + j] = !!(fi.submap & 1U << j);
}
if (xen_pv_domain()) {
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 067/135] MIPS: Remove repetitive increase irq_err_count
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 066/135] x86/xen: Remove undefined behavior in setup_features() Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 068/135] afs: Fix dynamic root getattr Greg Kroah-Hartman
` (75 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, k2ci, huhai, Genjian Zhang,
Thomas Bogendoerfer, Sasha Levin
From: huhai <huhai@kylinos.cn>
[ Upstream commit c81aba8fde2aee4f5778ebab3a1d51bd2ef48e4c ]
commit 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx") added
a function irq_dispatch, and it'll increase irq_err_count when the get_irq
callback returns a negative value, but increase irq_err_count in get_irq
was not removed.
And also, modpost complains once gpio-vr41xx drivers become modules.
ERROR: modpost: "irq_err_count" [drivers/gpio/gpio-vr41xx.ko] undefined!
So it would be a good idea to remove repetitive increase irq_err_count in
get_irq callback.
Fixes: 27fdd325dace ("MIPS: Update VR41xx GPIO driver to use gpiolib")
Fixes: 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx")
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: huhai <huhai@kylinos.cn>
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/vr41xx/common/icu.c | 2 --
drivers/gpio/gpio-vr41xx.c | 2 --
2 files changed, 4 deletions(-)
diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c
index 7b7f25b4b057..9240bcdbe74e 100644
--- a/arch/mips/vr41xx/common/icu.c
+++ b/arch/mips/vr41xx/common/icu.c
@@ -640,8 +640,6 @@ static int icu_get_irq(unsigned int irq)
printk(KERN_ERR "spurious ICU interrupt: %04x,%04x\n", pend1, pend2);
- atomic_inc(&irq_err_count);
-
return -1;
}
diff --git a/drivers/gpio/gpio-vr41xx.c b/drivers/gpio/gpio-vr41xx.c
index 98cd715ccc33..8d09b619c166 100644
--- a/drivers/gpio/gpio-vr41xx.c
+++ b/drivers/gpio/gpio-vr41xx.c
@@ -217,8 +217,6 @@ static int giu_get_irq(unsigned int irq)
printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n",
maskl, pendl, maskh, pendh);
- atomic_inc(&irq_err_count);
-
return -EINVAL;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 068/135] afs: Fix dynamic root getattr
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 067/135] MIPS: Remove repetitive increase irq_err_count Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 069/135] ice: ethtool: advertise 1000M speeds properly Greg Kroah-Hartman
` (74 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marc Dionne, David Howells,
linux-afs, Linus Torvalds, Sasha Levin
From: David Howells <dhowells@redhat.com>
[ Upstream commit cb78d1b5efffe4cf97e16766329dd7358aed3deb ]
The recent patch to make afs_getattr consult the server didn't account
for the pseudo-inodes employed by the dynamic root-type afs superblock
not having a volume or a server to access, and thus an oops occurs if
such a directory is stat'd.
Fix this by checking to see if the vnode->volume pointer actually points
anywhere before following it in afs_getattr().
This can be tested by stat'ing a directory in /afs. It may be
sufficient just to do "ls /afs" and the oops looks something like:
BUG: kernel NULL pointer dereference, address: 0000000000000020
...
RIP: 0010:afs_getattr+0x8b/0x14b
...
Call Trace:
<TASK>
vfs_statx+0x79/0xf5
vfs_fstatat+0x49/0x62
Fixes: 2aeb8c86d499 ("afs: Fix afs_getattr() to refetch file status if callback break occurred")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/165408450783.1031787.7941404776393751186.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/afs/inode.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index a47666ba48f5..785bacb972da 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -733,7 +733,8 @@ int afs_getattr(struct user_namespace *mnt_userns, const struct path *path,
_enter("{ ino=%lu v=%u }", inode->i_ino, inode->i_generation);
- if (!(query_flags & AT_STATX_DONT_SYNC) &&
+ if (vnode->volume &&
+ !(query_flags & AT_STATX_DONT_SYNC) &&
!test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags)) {
key = afs_request_key(vnode->volume->cell);
if (IS_ERR(key))
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 069/135] ice: ethtool: advertise 1000M speeds properly
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 068/135] afs: Fix dynamic root getattr Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 070/135] regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips Greg Kroah-Hartman
` (73 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Anatolii Gerasymenko, Tony Nguyen,
Sasha Levin, Gurucharan
From: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
[ Upstream commit c3d184c83ff4b80167e34edfc3d21df424bf27ff ]
In current implementation ice_update_phy_type enables all link modes
for selected speed. This approach doesn't work for 1000M speeds,
because both copper (1000baseT) and optical (1000baseX) standards
cannot be enabled at once.
Fix this, by adding the function `ice_set_phy_type_from_speed()`
for 1000M speeds.
Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ice/ice_ethtool.c | 39 +++++++++++++++++++-
1 file changed, 38 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 19f115402969..982db894754f 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2150,6 +2150,42 @@ ice_setup_autoneg(struct ice_port_info *p, struct ethtool_link_ksettings *ks,
return err;
}
+/**
+ * ice_set_phy_type_from_speed - set phy_types based on speeds
+ * and advertised modes
+ * @ks: ethtool link ksettings struct
+ * @phy_type_low: pointer to the lower part of phy_type
+ * @phy_type_high: pointer to the higher part of phy_type
+ * @adv_link_speed: targeted link speeds bitmap
+ */
+static void
+ice_set_phy_type_from_speed(const struct ethtool_link_ksettings *ks,
+ u64 *phy_type_low, u64 *phy_type_high,
+ u16 adv_link_speed)
+{
+ /* Handle 1000M speed in a special way because ice_update_phy_type
+ * enables all link modes, but having mixed copper and optical
+ * standards is not supported.
+ */
+ adv_link_speed &= ~ICE_AQ_LINK_SPEED_1000MB;
+
+ if (ethtool_link_ksettings_test_link_mode(ks, advertising,
+ 1000baseT_Full))
+ *phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_T |
+ ICE_PHY_TYPE_LOW_1G_SGMII;
+
+ if (ethtool_link_ksettings_test_link_mode(ks, advertising,
+ 1000baseKX_Full))
+ *phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_KX;
+
+ if (ethtool_link_ksettings_test_link_mode(ks, advertising,
+ 1000baseX_Full))
+ *phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_SX |
+ ICE_PHY_TYPE_LOW_1000BASE_LX;
+
+ ice_update_phy_type(phy_type_low, phy_type_high, adv_link_speed);
+}
+
/**
* ice_set_link_ksettings - Set Speed and Duplex
* @netdev: network interface device structure
@@ -2286,7 +2322,8 @@ ice_set_link_ksettings(struct net_device *netdev,
adv_link_speed = curr_link_speed;
/* Convert the advertise link speeds to their corresponded PHY_TYPE */
- ice_update_phy_type(&phy_type_low, &phy_type_high, adv_link_speed);
+ ice_set_phy_type_from_speed(ks, &phy_type_low, &phy_type_high,
+ adv_link_speed);
if (!autoneg_changed && adv_link_speed == curr_link_speed) {
netdev_info(netdev, "Nothing changed, exiting without setting anything.\n");
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 070/135] regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 069/135] ice: ethtool: advertise 1000M speeds properly Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 071/135] regmap-irq: Fix offset/index mismatch in read_sub_irq_data() Greg Kroah-Hartman
` (72 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aidan MacDonald, Mark Brown, Sasha Levin
From: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
[ Upstream commit 485037ae9a095491beb7f893c909a76cc4f9d1e7 ]
When enabling a type_in_mask irq, the type_buf contents must be
AND'd with the mask of the IRQ we're enabling to avoid enabling
other IRQs by accident, which can happen if several type_in_mask
irqs share a mask register.
Fixes: bc998a730367 ("regmap: irq: handle HW using separate rising/falling edge interrupts")
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220620200644.1961936-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/regmap/regmap-irq.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 4a446259a184..cd12078ed51b 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -252,6 +252,7 @@ static void regmap_irq_enable(struct irq_data *data)
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
struct regmap *map = d->map;
const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
+ unsigned int reg = irq_data->reg_offset / map->reg_stride;
unsigned int mask, type;
type = irq_data->type.type_falling_val | irq_data->type.type_rising_val;
@@ -268,14 +269,14 @@ static void regmap_irq_enable(struct irq_data *data)
* at the corresponding offset in regmap_irq_set_type().
*/
if (d->chip->type_in_mask && type)
- mask = d->type_buf[irq_data->reg_offset / map->reg_stride];
+ mask = d->type_buf[reg] & irq_data->mask;
else
mask = irq_data->mask;
if (d->chip->clear_on_unmask)
d->clear_status = true;
- d->mask_buf[irq_data->reg_offset / map->reg_stride] &= ~mask;
+ d->mask_buf[reg] &= ~mask;
}
static void regmap_irq_disable(struct irq_data *data)
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 071/135] regmap-irq: Fix offset/index mismatch in read_sub_irq_data()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 070/135] regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 072/135] igb: Make DMA faster when CPU is active on the PCIe link Greg Kroah-Hartman
` (71 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aidan MacDonald, Mark Brown, Sasha Levin
From: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
[ Upstream commit 3f05010f243be06478a9b11cfce0ce994f5a0890 ]
We need to divide the sub-irq status register offset by register
stride to get an index for the status buffer to avoid an out of
bounds write when the register stride is greater than 1.
Fixes: a2d21848d921 ("regmap: regmap-irq: Add main status register support")
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220620200644.1961936-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/regmap/regmap-irq.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index cd12078ed51b..3aac960ae30a 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -387,6 +387,7 @@ static inline int read_sub_irq_data(struct regmap_irq_chip_data *data,
subreg = &chip->sub_reg_offsets[b];
for (i = 0; i < subreg->num_regs; i++) {
unsigned int offset = subreg->offset[i];
+ unsigned int index = offset / map->reg_stride;
if (chip->not_fixed_stride)
ret = regmap_read(map,
@@ -395,7 +396,7 @@ static inline int read_sub_irq_data(struct regmap_irq_chip_data *data,
else
ret = regmap_read(map,
chip->status_base + offset,
- &data->status_buf[offset]);
+ &data->status_buf[index]);
if (ret)
break;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 072/135] igb: Make DMA faster when CPU is active on the PCIe link
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 071/135] regmap-irq: Fix offset/index mismatch in read_sub_irq_data() Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 073/135] virtio_net: fix xdp_rxq_info bug after suspend/resume Greg Kroah-Hartman
` (70 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kai-Heng Feng, Tony Nguyen,
Jakub Kicinski, Sasha Levin, Gurucharan
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ Upstream commit 4e0effd9007ea0be31f7488611eb3824b4541554 ]
Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps
Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which
will be significantly lower when 1) ASPM is disabled or 2) SoC package
c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx
speed can reach to ~950Mbps.
According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC",
"DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so
set it to 1b for "DMA is considered idle when there is no Rx or Tx AND
when there are no TLPs indicating that CPU is active detected on the
PCIe link (such as the host executes CSR or Configuration register read
or write operation)" and performing Tx should also fall under "active
CPU on PCIe link" case.
In addition to that, commit b6e0c419f040 ("igb: Move DMA Coalescing init
code to separate function.") seems to wrongly changed from enabling
E1000_PCIEMISC_LX_DECISION to disabling it, also fix that.
Fixes: b6e0c419f040 ("igb: Move DMA Coalescing init code to separate function.")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igb/igb_main.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 5ee5ee8e6848..db11a1c278f6 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -9823,11 +9823,10 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
struct e1000_hw *hw = &adapter->hw;
u32 dmac_thr;
u16 hwm;
+ u32 reg;
if (hw->mac.type > e1000_82580) {
if (adapter->flags & IGB_FLAG_DMAC) {
- u32 reg;
-
/* force threshold to 0. */
wr32(E1000_DMCTXTH, 0);
@@ -9860,7 +9859,6 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
/* Disable BMC-to-OS Watchdog Enable */
if (hw->mac.type != e1000_i354)
reg &= ~E1000_DMACR_DC_BMC2OSW_EN;
-
wr32(E1000_DMACR, reg);
/* no lower threshold to disable
@@ -9877,12 +9875,12 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
*/
wr32(E1000_DMCTXTH, (IGB_MIN_TXPBSIZE -
(IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6);
+ }
- /* make low power state decision controlled
- * by DMA coal
- */
+ if (hw->mac.type >= e1000_i210 ||
+ (adapter->flags & IGB_FLAG_DMAC)) {
reg = rd32(E1000_PCIEMISC);
- reg &= ~E1000_PCIEMISC_LX_DECISION;
+ reg |= E1000_PCIEMISC_LX_DECISION;
wr32(E1000_PCIEMISC, reg);
} /* endif adapter->dmac is not disabled */
} else if (hw->mac.type == e1000_82580) {
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 073/135] virtio_net: fix xdp_rxq_info bug after suspend/resume
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 072/135] igb: Make DMA faster when CPU is active on the PCIe link Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 074/135] Revert "net/tls: fix tls_sk_proto_close executed repeatedly" Greg Kroah-Hartman
` (69 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stephan Gerhold,
Jesper Dangaard Brouer, Jason Wang, Jakub Kicinski, Sasha Levin
From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
[ Upstream commit 8af52fe9fd3bf5e7478da99193c0632276e1dfce ]
The following sequence currently causes a driver bug warning
when using virtio_net:
# ip link set eth0 up
# echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem)
<resume>
# ip link set eth0 down
Missing register, driver bug
WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60
Call trace:
xdp_rxq_info_unreg+0x58/0x60
virtnet_close+0x58/0xac
__dev_close_many+0xac/0x140
__dev_change_flags+0xd8/0x210
dev_change_flags+0x24/0x64
do_setlink+0x230/0xdd0
...
This happens because virtnet_freeze() frees the receive_queue
completely (including struct xdp_rxq_info) but does not call
xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the
receive_queue again but does not call xdp_rxq_info_reg().
Actually, parts of virtnet_freeze_down() and virtnet_restore_up()
are almost identical to virtnet_close() and virtnet_open(): only
the calls to xdp_rxq_info_(un)reg() are missing. This means that
we can fix this easily and avoid such problems in the future by
just calling virtnet_close()/open() from the freeze/restore handlers.
Aside from adding the missing xdp_rxq_info calls the only difference
is that the refill work is only cancelled if netif_running(). However,
this should not make any functional difference since the refill work
should only be active if the network interface is actually up.
Fixes: 754b8a21a96d ("virtio_net: setup xdp_rxq_info")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220621114845.3650258-1-stephan.gerhold@kernkonzept.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/virtio_net.c | 25 ++++++-------------------
1 file changed, 6 insertions(+), 19 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 73aba760e10c..468d0ffc266b 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -2431,7 +2431,6 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
static void virtnet_freeze_down(struct virtio_device *vdev)
{
struct virtnet_info *vi = vdev->priv;
- int i;
/* Make sure no work handler is accessing the device */
flush_work(&vi->config_work);
@@ -2439,14 +2438,8 @@ static void virtnet_freeze_down(struct virtio_device *vdev)
netif_tx_lock_bh(vi->dev);
netif_device_detach(vi->dev);
netif_tx_unlock_bh(vi->dev);
- cancel_delayed_work_sync(&vi->refill);
-
- if (netif_running(vi->dev)) {
- for (i = 0; i < vi->max_queue_pairs; i++) {
- napi_disable(&vi->rq[i].napi);
- virtnet_napi_tx_disable(&vi->sq[i].napi);
- }
- }
+ if (netif_running(vi->dev))
+ virtnet_close(vi->dev);
}
static int init_vqs(struct virtnet_info *vi);
@@ -2454,7 +2447,7 @@ static int init_vqs(struct virtnet_info *vi);
static int virtnet_restore_up(struct virtio_device *vdev)
{
struct virtnet_info *vi = vdev->priv;
- int err, i;
+ int err;
err = init_vqs(vi);
if (err)
@@ -2463,15 +2456,9 @@ static int virtnet_restore_up(struct virtio_device *vdev)
virtio_device_ready(vdev);
if (netif_running(vi->dev)) {
- for (i = 0; i < vi->curr_queue_pairs; i++)
- if (!try_fill_recv(vi, &vi->rq[i], GFP_KERNEL))
- schedule_delayed_work(&vi->refill, 0);
-
- for (i = 0; i < vi->max_queue_pairs; i++) {
- virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi);
- virtnet_napi_tx_enable(vi, vi->sq[i].vq,
- &vi->sq[i].napi);
- }
+ err = virtnet_open(vi->dev);
+ if (err)
+ return err;
}
netif_tx_lock_bh(vi->dev);
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 074/135] Revert "net/tls: fix tls_sk_proto_close executed repeatedly"
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 073/135] virtio_net: fix xdp_rxq_info bug after suspend/resume Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 075/135] sock: redo the psock vs ULP protection check Greg Kroah-Hartman
` (68 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jakub Kicinski, John Fastabend,
Paolo Abeni, Sasha Levin
From: Jakub Kicinski <kuba@kernel.org>
[ Upstream commit 1b205d948fbb06a7613d87dcea0ff5fd8a08ed91 ]
This reverts commit 69135c572d1f84261a6de2a1268513a7e71753e2.
This commit was just papering over the issue, ULP should not
get ->update() called with its own sk_prot. Each ULP would
need to add this check.
Fixes: 69135c572d1f ("net/tls: fix tls_sk_proto_close executed repeatedly")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20220620191353.1184629-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/tls/tls_main.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c
index 057c1af6182a..9aac9c60d786 100644
--- a/net/tls/tls_main.c
+++ b/net/tls/tls_main.c
@@ -790,9 +790,6 @@ static void tls_update(struct sock *sk, struct proto *p,
{
struct tls_context *ctx;
- if (sk->sk_prot == p)
- return;
-
ctx = tls_get_ctx(sk);
if (likely(ctx)) {
ctx->sk_write_space = write_space;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 075/135] sock: redo the psock vs ULP protection check
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 074/135] Revert "net/tls: fix tls_sk_proto_close executed repeatedly" Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 076/135] nvme-pci: add NO APST quirk for Kioxia device Greg Kroah-Hartman
` (67 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jakub Kicinski, John Fastabend,
Jakub Sitnicki, Paolo Abeni, Sasha Levin
From: Jakub Kicinski <kuba@kernel.org>
[ Upstream commit e34a07c0ae3906f97eb18df50902e2a01c1015b6 ]
Commit 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
has moved the inet_csk_has_ulp(sk) check from sk_psock_init() to
the new tcp_bpf_update_proto() function. I'm guessing that this
was done to allow creating psocks for non-inet sockets.
Unfortunately the destruction path for psock includes the ULP
unwind, so we need to fail the sk_psock_init() itself.
Otherwise if ULP is already present we'll notice that later,
and call tcp_update_ulp() with the sk_proto of the ULP
itself, which will most likely result in the ULP looping
its callbacks.
Fixes: 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220620191353.1184629-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/inet_sock.h | 5 +++++
net/core/skmsg.c | 5 +++++
net/ipv4/tcp_bpf.c | 3 ---
net/tls/tls_main.c | 2 ++
4 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index 9e1111f5915b..d81b7f85819e 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -252,6 +252,11 @@ struct inet_sock {
#define IP_CMSG_CHECKSUM BIT(7)
#define IP_CMSG_RECVFRAGSIZE BIT(8)
+static inline bool sk_is_inet(struct sock *sk)
+{
+ return sk->sk_family == AF_INET || sk->sk_family == AF_INET6;
+}
+
/**
* sk_to_full_sk - Access to a full socket
* @sk: pointer to a socket
diff --git a/net/core/skmsg.c b/net/core/skmsg.c
index cc381165ea08..ede0af308f40 100644
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -695,6 +695,11 @@ struct sk_psock *sk_psock_init(struct sock *sk, int node)
write_lock_bh(&sk->sk_callback_lock);
+ if (sk_is_inet(sk) && inet_csk_has_ulp(sk)) {
+ psock = ERR_PTR(-EINVAL);
+ goto out;
+ }
+
if (sk->sk_user_data) {
psock = ERR_PTR(-EBUSY);
goto out;
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index 1cdcb4df0eb7..2c597a4e429a 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -612,9 +612,6 @@ int tcp_bpf_update_proto(struct sock *sk, struct sk_psock *psock, bool restore)
return 0;
}
- if (inet_csk_has_ulp(sk))
- return -EINVAL;
-
if (sk->sk_family == AF_INET6) {
if (tcp_bpf_assert_proto_ops(psock->sk_proto))
return -EINVAL;
diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c
index 9aac9c60d786..62b1c5e32bbd 100644
--- a/net/tls/tls_main.c
+++ b/net/tls/tls_main.c
@@ -790,6 +790,8 @@ static void tls_update(struct sock *sk, struct proto *p,
{
struct tls_context *ctx;
+ WARN_ON_ONCE(sk->sk_prot == p);
+
ctx = tls_get_ctx(sk);
if (likely(ctx)) {
ctx->sk_write_space = write_space;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 076/135] nvme-pci: add NO APST quirk for Kioxia device
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 075/135] sock: redo the psock vs ULP protection check Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 077/135] nvme: move the Samsung X5 quirk entry to the core quirks Greg Kroah-Hartman
` (66 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Enzo Matsumiya, Christoph Hellwig,
Sasha Levin
From: Enzo Matsumiya <ematsumiya@suse.de>
[ Upstream commit 5a6254d55e2a9f7919ead8580d7aa0c7a382b26a ]
This particular Kioxia device times out and aborts I/O during any load,
but it's more easily observable with discards (fstrim).
The device gets to a state that is also not possible to use
"nvme set-feature" to disable APST.
Booting with nvme_core.default_ps_max_latency=0 solves the issue.
We had a dozen or so of these devices behaving this same way in
customer environments.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/host/core.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 9bc9f6d225bd..3ef1f9112ee0 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2475,6 +2475,20 @@ static const struct nvme_core_quirk_entry core_quirks[] = {
.vid = 0x14a4,
.fr = "22301111",
.quirks = NVME_QUIRK_SIMPLE_SUSPEND,
+ },
+ {
+ /*
+ * This Kioxia CD6-V Series / HPE PE8030 device times out and
+ * aborts I/O during any load, but more easily reproducible
+ * with discards (fstrim).
+ *
+ * The device is left in a state where it is also not possible
+ * to use "nvme set-feature" to disable APST, but booting with
+ * nvme_core.default_ps_max_latency=0 works.
+ */
+ .vid = 0x1e0f,
+ .mn = "KCD6XVUL6T40",
+ .quirks = NVME_QUIRK_NO_APST,
}
};
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 077/135] nvme: move the Samsung X5 quirk entry to the core quirks
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 076/135] nvme-pci: add NO APST quirk for Kioxia device Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 078/135] gpio: winbond: Fix error code in winbond_gpio_get() Greg Kroah-Hartman
` (65 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christoph Hellwig, Pankaj Raghav,
Sasha Levin
From: Christoph Hellwig <hch@lst.de>
[ Upstream commit e6487833182a8a0187f0292aca542fc163ccd03e ]
This device shares the PCI ID with the Samsung 970 Evo Plus that
does not need or want the quirks. Move the the quirk entry to the
core table based on the model number instead.
Fixes: bc360b0b1611 ("nvme-pci: add quirks for Samsung X5 SSDs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/host/core.c | 14 ++++++++++++++
drivers/nvme/host/pci.c | 4 ----
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 3ef1f9112ee0..19054b791c67 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2489,6 +2489,20 @@ static const struct nvme_core_quirk_entry core_quirks[] = {
.vid = 0x1e0f,
.mn = "KCD6XVUL6T40",
.quirks = NVME_QUIRK_NO_APST,
+ },
+ {
+ /*
+ * The external Samsung X5 SSD fails initialization without a
+ * delay before checking if it is ready and has a whole set of
+ * other problems. To make this even more interesting, it
+ * shares the PCI ID with internal Samsung 970 Evo Plus that
+ * does not need or want these quirks.
+ */
+ .vid = 0x144d,
+ .mn = "Samsung Portable SSD X5",
+ .quirks = NVME_QUIRK_DELAY_BEFORE_CHK_RDY |
+ NVME_QUIRK_NO_DEEPEST_PS |
+ NVME_QUIRK_IGNORE_DEV_SUBNQN,
}
};
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 3ddd24a42043..58b8461b2b0f 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3380,10 +3380,6 @@ static const struct pci_device_id nvme_id_table[] = {
NVME_QUIRK_128_BYTES_SQES |
NVME_QUIRK_SHARED_TAGS |
NVME_QUIRK_SKIP_CID_GEN },
- { PCI_DEVICE(0x144d, 0xa808), /* Samsung X5 */
- .driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY|
- NVME_QUIRK_NO_DEEPEST_PS |
- NVME_QUIRK_IGNORE_DEV_SUBNQN, },
{ PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) },
{ 0, }
};
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 078/135] gpio: winbond: Fix error code in winbond_gpio_get()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 077/135] nvme: move the Samsung X5 quirk entry to the core quirks Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 079/135] s390/cpumf: Handle events cycles and instructions identical Greg Kroah-Hartman
` (64 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Andy Shevchenko,
Bartosz Golaszewski, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 9ca766eaea2e87b8b773bff04ee56c055cb76d4e ]
This error path returns 1, but it should instead propagate the negative
error code from winbond_sio_enter().
Fixes: a0d65009411c ("gpio: winbond: Add driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpio-winbond.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpio/gpio-winbond.c b/drivers/gpio/gpio-winbond.c
index 7f8f5b02e31d..4b61d975cc0e 100644
--- a/drivers/gpio/gpio-winbond.c
+++ b/drivers/gpio/gpio-winbond.c
@@ -385,12 +385,13 @@ static int winbond_gpio_get(struct gpio_chip *gc, unsigned int offset)
unsigned long *base = gpiochip_get_data(gc);
const struct winbond_gpio_info *info;
bool val;
+ int ret;
winbond_gpio_get_info(&offset, &info);
- val = winbond_sio_enter(*base);
- if (val)
- return val;
+ ret = winbond_sio_enter(*base);
+ if (ret)
+ return ret;
winbond_sio_select_logical(*base, info->dev);
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 079/135] s390/cpumf: Handle events cycles and instructions identical
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 078/135] gpio: winbond: Fix error code in winbond_gpio_get() Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 080/135] iio: mma8452: fix probe fail when device tree compatible is used Greg Kroah-Hartman
` (63 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thomas Richter, Sumanth Korikkar,
Alexander Gordeev, Sasha Levin
From: Thomas Richter <tmricht@linux.ibm.com>
[ Upstream commit be857b7f77d130dbbd47c91fc35198b040f35865 ]
Events CPU_CYCLES and INSTRUCTIONS can be submitted with two different
perf_event attribute::type values:
- PERF_TYPE_HARDWARE: when invoked via perf tool predefined events name
cycles or cpu-cycles or instructions.
- pmu->type: when invoked via perf tool event name cpu_cf/CPU_CYLCES/ or
cpu_cf/INSTRUCTIONS/. This invocation also selects the PMU to which
the event belongs.
Handle both type of invocations identical for events CPU_CYLCES and
INSTRUCTIONS. They address the same hardware.
The result is different when event modifier exclude_kernel is also set.
Invocation with event modifier for user space event counting fails.
Output before:
# perf stat -e cpum_cf/cpu_cycles/u -- true
Performance counter stats for 'true':
<not supported> cpum_cf/cpu_cycles/u
0.000761033 seconds time elapsed
0.000076000 seconds user
0.000725000 seconds sys
#
Output after:
# perf stat -e cpum_cf/cpu_cycles/u -- true
Performance counter stats for 'true':
349,613 cpum_cf/cpu_cycles/u
0.000844143 seconds time elapsed
0.000079000 seconds user
0.000800000 seconds sys
#
Fixes: 6a82e23f45fe ("s390/cpumf: Adjust registration of s390 PMU device drivers")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
[agordeev@linux.ibm.com corrected commit ID of Fixes commit]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/kernel/perf_cpum_cf.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index cceb8ec707e4..d2a2a18b5580 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -516,6 +516,26 @@ static int __hw_perf_event_init(struct perf_event *event, unsigned int type)
return err;
}
+/* Events CPU_CYLCES and INSTRUCTIONS can be submitted with two different
+ * attribute::type values:
+ * - PERF_TYPE_HARDWARE:
+ * - pmu->type:
+ * Handle both type of invocations identical. They address the same hardware.
+ * The result is different when event modifiers exclude_kernel and/or
+ * exclude_user are also set.
+ */
+static int cpumf_pmu_event_type(struct perf_event *event)
+{
+ u64 ev = event->attr.config;
+
+ if (cpumf_generic_events_basic[PERF_COUNT_HW_CPU_CYCLES] == ev ||
+ cpumf_generic_events_basic[PERF_COUNT_HW_INSTRUCTIONS] == ev ||
+ cpumf_generic_events_user[PERF_COUNT_HW_CPU_CYCLES] == ev ||
+ cpumf_generic_events_user[PERF_COUNT_HW_INSTRUCTIONS] == ev)
+ return PERF_TYPE_HARDWARE;
+ return PERF_TYPE_RAW;
+}
+
static int cpumf_pmu_event_init(struct perf_event *event)
{
unsigned int type = event->attr.type;
@@ -525,7 +545,7 @@ static int cpumf_pmu_event_init(struct perf_event *event)
err = __hw_perf_event_init(event, type);
else if (event->pmu->type == type)
/* Registered as unknown PMU */
- err = __hw_perf_event_init(event, PERF_TYPE_RAW);
+ err = __hw_perf_event_init(event, cpumf_pmu_event_type(event));
else
return -ENOENT;
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 080/135] iio: mma8452: fix probe fail when device tree compatible is used.
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 079/135] s390/cpumf: Handle events cycles and instructions identical Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 081/135] iio: magnetometer: yas530: Fix memchr_inv() misuse Greg Kroah-Hartman
` (62 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Haibo Chen, Jonathan Cameron, Sasha Levin
From: Haibo Chen <haibo.chen@nxp.com>
[ Upstream commit fe18894930a025617114aa8ca0adbf94d5bffe89 ]
Correct the logic for the probe. First check of_match_table, if
not meet, then check i2c_driver.id_table. If both not meet, then
return fail.
Fixes: a47ac019e7e8 ("iio: mma8452: Fix probe failing when an i2c_device_id is used")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/1650876060-17577-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/accel/mma8452.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 21a99467f364..40faf09f5d87 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1539,11 +1539,13 @@ static int mma8452_probe(struct i2c_client *client,
mutex_init(&data->lock);
data->chip_info = device_get_match_data(&client->dev);
- if (!data->chip_info && id) {
- data->chip_info = &mma_chip_info_table[id->driver_data];
- } else {
- dev_err(&client->dev, "unknown device model\n");
- return -ENODEV;
+ if (!data->chip_info) {
+ if (id) {
+ data->chip_info = &mma_chip_info_table[id->driver_data];
+ } else {
+ dev_err(&client->dev, "unknown device model\n");
+ return -ENODEV;
+ }
}
data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 081/135] iio: magnetometer: yas530: Fix memchr_inv() misuse
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 080/135] iio: mma8452: fix probe fail when device tree compatible is used Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 082/135] iio: adc: vf610: fix conversion mode sysfs node name Greg Kroah-Hartman
` (61 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jakob Hauser, Andy Shevchenko,
Linus Walleij, Jonathan Cameron, Sasha Levin
From: Linus Walleij <linus.walleij@linaro.org>
[ Upstream commit bb52d3691db8cf24cea049235223f3599778f264 ]
The call to check if the calibration is all zeroes is doing
it wrong: memchr_inv() returns NULL if the the calibration
contains all zeroes, but the check is for != NULL.
Fix it up. It's probably not an urgent fix because the inner
check for BIT(7) in data[13] will save us. But fix it.
Fixes: de8860b1ed47 ("iio: magnetometer: Add driver for Yamaha YAS530")
Reported-by: Jakob Hauser <jahau@rocketmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220501195029.151852-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/magnetometer/yamaha-yas530.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
index 9ff7b0e56cf6..b2bc637150bf 100644
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -639,7 +639,7 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx)
dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data);
/* Sanity check, is this all zeroes? */
- if (memchr_inv(data, 0x00, 13)) {
+ if (memchr_inv(data, 0x00, 13) == NULL) {
if (!(data[13] & BIT(7)))
dev_warn(yas5xx->dev, "calibration is blank!\n");
}
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 082/135] iio: adc: vf610: fix conversion mode sysfs node name
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 081/135] iio: magnetometer: yas530: Fix memchr_inv() misuse Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 083/135] usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC Greg Kroah-Hartman
` (60 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Baruch Siach, Haibo Chen,
Jonathan Cameron, Sasha Levin
From: Baruch Siach <baruch@tkos.co.il>
[ Upstream commit f1a633b15cd5371a2a83f02c513984e51132dd68 ]
The documentation missed the "in_" prefix for this IIO_SHARED_BY_DIR
entry.
Fixes: bf04c1a367e3 ("iio: adc: vf610: implement configurable conversion modes")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/560dc93fafe5ef7e9a409885fd20b6beac3973d8.1653900626.git.baruch@tkos.co.il
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/ABI/testing/sysfs-bus-iio-vf610 | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-vf610 b/Documentation/ABI/testing/sysfs-bus-iio-vf610
index 308a6756d3bf..491ead804488 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-vf610
+++ b/Documentation/ABI/testing/sysfs-bus-iio-vf610
@@ -1,4 +1,4 @@
-What: /sys/bus/iio/devices/iio:deviceX/conversion_mode
+What: /sys/bus/iio/devices/iio:deviceX/in_conversion_mode
KernelVersion: 4.2
Contact: linux-iio@vger.kernel.org
Description:
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 083/135] usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 082/135] iio: adc: vf610: fix conversion mode sysfs node name Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 084/135] xhci: turn off port power in shutdown Greg Kroah-Hartman
` (59 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Guenter Roeck,
Heikki Krogerus, Andy Shevchenko, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 9ef165406308515dcf2e3f6e97b39a1c56d86db5 ]
Intel SoC PMIC is a generic name for all PMICs that are used
on Intel platforms. In particular, INTEL_SOC_PMIC kernel configuration
option refers to Crystal Cove PMIC, which has never been a part
of any Intel Broxton hardware. Drop wrong dependency from Kconfig.
Note, the correct dependency is satisfied via ACPI PMIC OpRegion driver,
which the Type-C depends on.
Fixes: d2061f9cc32d ("usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220620104316.57592-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/typec/tcpm/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
index 557f392fe24d..073fd2ea5e0b 100644
--- a/drivers/usb/typec/tcpm/Kconfig
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -56,7 +56,6 @@ config TYPEC_WCOVE
tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver"
depends on ACPI
depends on MFD_INTEL_PMC_BXT
- depends on INTEL_SOC_PMIC
depends on BXT_WC_PMIC_OPREGION
help
This driver adds support for USB Type-C on Intel Broxton platforms
--
2.35.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 084/135] xhci: turn off port power in shutdown
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 083/135] usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 085/135] xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI Greg Kroah-Hartman
` (58 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathias Nyman
From: Mathias Nyman <mathias.nyman@linux.intel.com>
commit 83810f84ecf11dfc5a9414a8b762c3501b328185 upstream.
If ports are not turned off in shutdown then runtime suspended
self-powered USB devices may survive in U3 link state over S5.
During subsequent boot, if firmware sends an IPC command to program
the port in DISCONNECT state, it will time out, causing significant
delay in the boot time.
Turning off roothub port power is also recommended in xhci
specification 4.19.4 "Port Power" in the additional note.
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220623111945.1557702-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-hub.c | 2 +-
drivers/usb/host/xhci.c | 15 +++++++++++++--
drivers/usb/host/xhci.h | 2 ++
3 files changed, 16 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -652,7 +652,7 @@ struct xhci_hub *xhci_get_rhub(struct us
* It will release and re-aquire the lock while calling ACPI
* method.
*/
-static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
+void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
u16 index, bool on, unsigned long *flags)
__must_hold(&xhci->lock)
{
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -774,6 +774,8 @@ static void xhci_stop(struct usb_hcd *hc
void xhci_shutdown(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ unsigned long flags;
+ int i;
if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
@@ -789,12 +791,21 @@ void xhci_shutdown(struct usb_hcd *hcd)
del_timer_sync(&xhci->shared_hcd->rh_timer);
}
- spin_lock_irq(&xhci->lock);
+ spin_lock_irqsave(&xhci->lock, flags);
xhci_halt(xhci);
+
+ /* Power off USB2 ports*/
+ for (i = 0; i < xhci->usb2_rhub.num_ports; i++)
+ xhci_set_port_power(xhci, xhci->main_hcd, i, false, &flags);
+
+ /* Power off USB3 ports*/
+ for (i = 0; i < xhci->usb3_rhub.num_ports; i++)
+ xhci_set_port_power(xhci, xhci->shared_hcd, i, false, &flags);
+
/* Workaround for spurious wakeups at shutdown with HSW */
if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
- spin_unlock_irq(&xhci->lock);
+ spin_unlock_irqrestore(&xhci->lock, flags);
xhci_cleanup_msix(xhci);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2174,6 +2174,8 @@ int xhci_hub_control(struct usb_hcd *hcd
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
+void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index,
+ bool on, unsigned long *flags);
void xhci_hc_died(struct xhci_hcd *xhci);
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 085/135] xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 084/135] xhci: turn off port power in shutdown Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 086/135] xhci-pci: Allow host runtime PM as default for Intel Meteor " Greg Kroah-Hartman
` (57 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, stable, Tanveer Alam, Mathias Nyman
From: Tanveer Alam <tanveer1.alam@intel.com>
commit 7516da47a349e74de623243a27f9b8a91446bf4f upstream.
In the same way as Intel Alder Lake TCSS (Type-C Subsystem) the Raptor
Lake TCSS xHCI needs to be runtime suspended whenever possible to
allow the TCSS hardware block to enter D3cold and thus save energy.
Cc: stable@kernel.org
Signed-off-by: Tanveer Alam <tanveer1.alam@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220623111945.1557702-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-pci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -61,6 +61,7 @@
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI 0x461e
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI 0x464e
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed
+#define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI 0xa71e
#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639
#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
@@ -270,7 +271,8 @@ static void xhci_pci_quirks(struct devic
pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI))
+ pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI))
xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 086/135] xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 085/135] xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 087/135] usb: gadget: Fix non-unique driver names in raw-gadget driver Greg Kroah-Hartman
` (56 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, stable, Utkarsh Patel, Mathias Nyman
From: Utkarsh Patel <utkarsh.h.patel@intel.com>
commit 8ffdc53a60049f3930afe161dc51c67959c8d83d upstream.
Meteor Lake TCSS(Type-C Subsystem) xHCI needs to be runtime suspended
whenever possible to allow the TCSS hardware block to enter D3cold and
thus save energy.
Cc: stable@kernel.org
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220623111945.1557702-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-pci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -62,6 +62,7 @@
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI 0x464e
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed
#define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI 0xa71e
+#define PCI_DEVICE_ID_INTEL_METEOR_LAKE_XHCI 0x7ec0
#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639
#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
@@ -272,7 +273,8 @@ static void xhci_pci_quirks(struct devic
pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI))
+ pdev->device == PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_METEOR_LAKE_XHCI))
xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 087/135] usb: gadget: Fix non-unique driver names in raw-gadget driver
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 086/135] xhci-pci: Allow host runtime PM as default for Intel Meteor " Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 088/135] USB: gadget: Fix double-free bug in raw_gadget driver Greg Kroah-Hartman
` (55 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrey Konovalov, Hillf Danton,
Alan Stern, syzbot+02b16343704b3af1667e
From: Alan Stern <stern@rowland.harvard.edu>
commit f2d8c2606825317b77db1f9ba0fc26ef26160b30 upstream.
In a report for a separate bug (which has already been fixed by commit
5f0b5f4d50fa "usb: gadget: fix race when gadget driver register via
ioctl") in the raw-gadget driver, the syzbot console log included
error messages caused by attempted registration of a new driver with
the same name as an existing driver:
> kobject_add_internal failed for raw-gadget with -EEXIST, don't try to register things with the same name in the same directory.
> UDC core: USB Raw Gadget: driver registration failed: -17
> misc raw-gadget: fail, usb_gadget_register_driver returned -17
These errors arise because raw_gadget.c registers a separate UDC
driver for each of the UDC instances it creates, but these drivers all
have the same name: "raw-gadget". Until recently this wasn't a
problem, but when the "gadget" bus was added and UDC drivers were
registered on this bus, it became possible for name conflicts to cause
the registrations to fail. The reason is simply that the bus code in
the driver core uses the driver name as a sysfs directory name (e.g.,
/sys/bus/gadget/drivers/raw-gadget/), and you can't create two
directories with the same pathname.
To fix this problem, the driver names used by raw-gadget are made
distinct by appending a unique ID number: "raw-gadget.N", with a
different value of N for each driver instance. And to avoid the
proliferation of error handling code in the raw_ioctl_init() routine,
the error return paths are refactored into the common pattern (goto
statements leading to cleanup code at the end of the routine).
Link: https://lore.kernel.org/all/0000000000008c664105dffae2eb@google.com/
Fixes: fc274c1e9973 "USB: gadget: Add a new bus for gadgets"
CC: Andrey Konovalov <andreyknvl@gmail.com>
CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+02b16343704b3af1667e@syzkaller.appspotmail.com
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YqdG32w+3h8c1s7z@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/legacy/raw_gadget.c | 62 ++++++++++++++++++++++++---------
1 file changed, 46 insertions(+), 16 deletions(-)
--- a/drivers/usb/gadget/legacy/raw_gadget.c
+++ b/drivers/usb/gadget/legacy/raw_gadget.c
@@ -11,6 +11,7 @@
#include <linux/ctype.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
+#include <linux/idr.h>
#include <linux/kref.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
@@ -36,6 +37,9 @@ MODULE_LICENSE("GPL");
/*----------------------------------------------------------------------*/
+static DEFINE_IDA(driver_id_numbers);
+#define DRIVER_DRIVER_NAME_LENGTH_MAX 32
+
#define RAW_EVENT_QUEUE_SIZE 16
struct raw_event_queue {
@@ -161,6 +165,9 @@ struct raw_dev {
/* Reference to misc device: */
struct device *dev;
+ /* Make driver names unique */
+ int driver_id_number;
+
/* Protected by lock: */
enum dev_state state;
bool gadget_registered;
@@ -189,6 +196,7 @@ static struct raw_dev *dev_new(void)
spin_lock_init(&dev->lock);
init_completion(&dev->ep0_done);
raw_event_queue_init(&dev->queue);
+ dev->driver_id_number = -1;
return dev;
}
@@ -199,6 +207,9 @@ static void dev_free(struct kref *kref)
kfree(dev->udc_name);
kfree(dev->driver.udc_name);
+ kfree(dev->driver.driver.name);
+ if (dev->driver_id_number >= 0)
+ ida_free(&driver_id_numbers, dev->driver_id_number);
if (dev->req) {
if (dev->ep0_urb_queued)
usb_ep_dequeue(dev->gadget->ep0, dev->req);
@@ -422,6 +433,7 @@ static int raw_ioctl_init(struct raw_dev
struct usb_raw_init arg;
char *udc_driver_name;
char *udc_device_name;
+ char *driver_driver_name;
unsigned long flags;
if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
@@ -440,36 +452,44 @@ static int raw_ioctl_init(struct raw_dev
return -EINVAL;
}
+ ret = ida_alloc(&driver_id_numbers, GFP_KERNEL);
+ if (ret < 0)
+ return ret;
+ dev->driver_id_number = ret;
+
+ driver_driver_name = kmalloc(DRIVER_DRIVER_NAME_LENGTH_MAX, GFP_KERNEL);
+ if (!driver_driver_name) {
+ ret = -ENOMEM;
+ goto out_free_driver_id_number;
+ }
+ snprintf(driver_driver_name, DRIVER_DRIVER_NAME_LENGTH_MAX,
+ DRIVER_NAME ".%d", dev->driver_id_number);
+
udc_driver_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
- if (!udc_driver_name)
- return -ENOMEM;
+ if (!udc_driver_name) {
+ ret = -ENOMEM;
+ goto out_free_driver_driver_name;
+ }
ret = strscpy(udc_driver_name, &arg.driver_name[0],
UDC_NAME_LENGTH_MAX);
- if (ret < 0) {
- kfree(udc_driver_name);
- return ret;
- }
+ if (ret < 0)
+ goto out_free_udc_driver_name;
ret = 0;
udc_device_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
if (!udc_device_name) {
- kfree(udc_driver_name);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_free_udc_driver_name;
}
ret = strscpy(udc_device_name, &arg.device_name[0],
UDC_NAME_LENGTH_MAX);
- if (ret < 0) {
- kfree(udc_driver_name);
- kfree(udc_device_name);
- return ret;
- }
+ if (ret < 0)
+ goto out_free_udc_device_name;
ret = 0;
spin_lock_irqsave(&dev->lock, flags);
if (dev->state != STATE_DEV_OPENED) {
dev_dbg(dev->dev, "fail, device is not opened\n");
- kfree(udc_driver_name);
- kfree(udc_device_name);
ret = -EINVAL;
goto out_unlock;
}
@@ -484,14 +504,24 @@ static int raw_ioctl_init(struct raw_dev
dev->driver.suspend = gadget_suspend;
dev->driver.resume = gadget_resume;
dev->driver.reset = gadget_reset;
- dev->driver.driver.name = DRIVER_NAME;
+ dev->driver.driver.name = driver_driver_name;
dev->driver.udc_name = udc_device_name;
dev->driver.match_existing_only = 1;
dev->state = STATE_DEV_INITIALIZED;
+ spin_unlock_irqrestore(&dev->lock, flags);
+ return ret;
out_unlock:
spin_unlock_irqrestore(&dev->lock, flags);
+out_free_udc_device_name:
+ kfree(udc_device_name);
+out_free_udc_driver_name:
+ kfree(udc_driver_name);
+out_free_driver_driver_name:
+ kfree(driver_driver_name);
+out_free_driver_id_number:
+ ida_free(&driver_id_numbers, dev->driver_id_number);
return ret;
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 088/135] USB: gadget: Fix double-free bug in raw_gadget driver
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 087/135] usb: gadget: Fix non-unique driver names in raw-gadget driver Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 089/135] usb: chipidea: udc: check request status before setting device address Greg Kroah-Hartman
` (54 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andrey Konovalov, Alan Stern
From: Alan Stern <stern@rowland.harvard.edu>
commit 90bc2af24638659da56397ff835f3c95a948f991 upstream.
Re-reading a recently merged fix to the raw_gadget driver showed that
it inadvertently introduced a double-free bug in a failure pathway.
If raw_ioctl_init() encounters an error after the driver ID number has
been allocated, it deallocates the ID number before returning. But
when dev_free() runs later on, it will then try to deallocate the ID
number a second time.
Closely related to this issue is another error in the recent fix: The
ID number is stored in the raw_dev structure before the code checks to
see whether the structure has already been initialized, in which case
the new ID number would overwrite the earlier value.
The solution to both bugs is to keep the new ID number in a local
variable, and store it in the raw_dev structure only after the check
for prior initialization. No errors can occur after that point, so
the double-free will never happen.
Fixes: f2d8c2606825 ("usb: gadget: Fix non-unique driver names in raw-gadget driver")
CC: Andrey Konovalov <andreyknvl@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YrMrRw5AyIZghN0v@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/legacy/raw_gadget.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--- a/drivers/usb/gadget/legacy/raw_gadget.c
+++ b/drivers/usb/gadget/legacy/raw_gadget.c
@@ -430,6 +430,7 @@ out_put:
static int raw_ioctl_init(struct raw_dev *dev, unsigned long value)
{
int ret = 0;
+ int driver_id_number;
struct usb_raw_init arg;
char *udc_driver_name;
char *udc_device_name;
@@ -452,10 +453,9 @@ static int raw_ioctl_init(struct raw_dev
return -EINVAL;
}
- ret = ida_alloc(&driver_id_numbers, GFP_KERNEL);
- if (ret < 0)
- return ret;
- dev->driver_id_number = ret;
+ driver_id_number = ida_alloc(&driver_id_numbers, GFP_KERNEL);
+ if (driver_id_number < 0)
+ return driver_id_number;
driver_driver_name = kmalloc(DRIVER_DRIVER_NAME_LENGTH_MAX, GFP_KERNEL);
if (!driver_driver_name) {
@@ -463,7 +463,7 @@ static int raw_ioctl_init(struct raw_dev
goto out_free_driver_id_number;
}
snprintf(driver_driver_name, DRIVER_DRIVER_NAME_LENGTH_MAX,
- DRIVER_NAME ".%d", dev->driver_id_number);
+ DRIVER_NAME ".%d", driver_id_number);
udc_driver_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
if (!udc_driver_name) {
@@ -507,6 +507,7 @@ static int raw_ioctl_init(struct raw_dev
dev->driver.driver.name = driver_driver_name;
dev->driver.udc_name = udc_device_name;
dev->driver.match_existing_only = 1;
+ dev->driver_id_number = driver_id_number;
dev->state = STATE_DEV_INITIALIZED;
spin_unlock_irqrestore(&dev->lock, flags);
@@ -521,7 +522,7 @@ out_free_udc_driver_name:
out_free_driver_driver_name:
kfree(driver_driver_name);
out_free_driver_id_number:
- ida_free(&driver_id_numbers, dev->driver_id_number);
+ ida_free(&driver_id_numbers, driver_id_number);
return ret;
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 089/135] usb: chipidea: udc: check request status before setting device address
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (87 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 088/135] USB: gadget: Fix double-free bug in raw_gadget driver Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 090/135] dt-bindings: usb: ohci: Increase the number of PHYs Greg Kroah-Hartman
` (53 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Xu Yang
From: Xu Yang <xu.yang_2@nxp.com>
commit b24346a240b36cfc4df194d145463874985aa29b upstream.
The complete() function may be called even though request is not
completed. In this case, it's necessary to check request status so
as not to set device address wrongly.
Fixes: 10775eb17bee ("usb: chipidea: udc: update gadget states according to ch9")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20220623030242.41796-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/chipidea/udc.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1040,6 +1040,9 @@ isr_setup_status_complete(struct usb_ep
struct ci_hdrc *ci = req->context;
unsigned long flags;
+ if (req->status < 0)
+ return;
+
if (ci->setaddr) {
hw_usb_set_address(ci, ci->address);
ci->setaddr = false;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 090/135] dt-bindings: usb: ohci: Increase the number of PHYs
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (88 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 089/135] usb: chipidea: udc: check request status before setting device address Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 091/135] dt-bindings: usb: ehci: " Greg Kroah-Hartman
` (52 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven
From: Geert Uytterhoeven <geert+renesas@glider.be>
commit 0f074c1c95ea496dc91279b6c4b9845a337517fa upstream.
"make dtbs_check":
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee080000: phys: [[17, 0], [31]] is too long
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee0c0000: phys: [[17, 1], [33], [21, 0]] is too long
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
Some USB OHCI controllers (e.g. on the Renesas RZ/G1C SoC) have multiple
PHYs. Increase the maximum number of PHYs to 3, which is sufficient for
now.
Fixes: 0499220d6dadafa5 ("dt-bindings: Add missing array size constraints")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/0112f9c8881513cb33bf7b66bc743dd08b35a2f5.1655301203.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/devicetree/bindings/usb/generic-ohci.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -102,7 +102,8 @@ properties:
Overrides the detected port count
phys:
- maxItems: 1
+ minItems: 1
+ maxItems: 3
phy-names:
const: usb
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 091/135] dt-bindings: usb: ehci: Increase the number of PHYs
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (89 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 090/135] dt-bindings: usb: ohci: Increase the number of PHYs Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 092/135] btrfs: dont set lock_owner when locking extent buffer for reading Greg Kroah-Hartman
` (51 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven
From: Geert Uytterhoeven <geert+renesas@glider.be>
commit 9faa1c8f92f33daad9db96944139de225cefa199 upstream.
"make dtbs_check":
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee080100: phys: [[17, 0], [31]] is too long
From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee0c0100: phys: [[17, 1], [33], [21, 0]] is too long
From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
Some USB EHCI controllers (e.g. on the Renesas RZ/G1C SoC) have multiple
PHYs. Increase the maximum number of PHYs to 3, which is sufficient for
now.
Fixes: 0499220d6dadafa5 ("dt-bindings: Add missing array size constraints")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c5d19e2f9714f43effd90208798fc1936098078f.1655301043.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/devicetree/bindings/usb/generic-ehci.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -135,7 +135,8 @@ properties:
Phandle of a companion.
phys:
- maxItems: 1
+ minItems: 1
+ maxItems: 3
phy-names:
const: usb
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 092/135] btrfs: dont set lock_owner when locking extent buffer for reading
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (90 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 091/135] dt-bindings: usb: ehci: " Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 093/135] btrfs: fix deadlock with fsync+fiemap+transaction commit Greg Kroah-Hartman
` (50 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nikolay Borisov, Filipe Manana,
Zygo Blaxell, David Sterba
From: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
commit 97e86631bccddfbbe0c13f9a9605cdef11d31296 upstream.
In 196d59ab9ccc "btrfs: switch extent buffer tree lock to rw_semaphore"
the functions for tree read locking were rewritten, and in the process
the read lock functions started setting eb->lock_owner = current->pid.
Previously lock_owner was only set in tree write lock functions.
Read locks are shared, so they don't have exclusive ownership of the
underlying object, so setting lock_owner to any single value for a
read lock makes no sense. It's mostly harmless because write locks
and read locks are mutually exclusive, and none of the existing code
in btrfs (btrfs_init_new_buffer and print_eb_refs_lock) cares what
nonsense is written in lock_owner when no writer is holding the lock.
KCSAN does care, and will complain about the data race incessantly.
Remove the assignments in the read lock functions because they're
useless noise.
Fixes: 196d59ab9ccc ("btrfs: switch extent buffer tree lock to rw_semaphore")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/locking.c | 3 ---
1 file changed, 3 deletions(-)
--- a/fs/btrfs/locking.c
+++ b/fs/btrfs/locking.c
@@ -45,7 +45,6 @@ void __btrfs_tree_read_lock(struct exten
start_ns = ktime_get_ns();
down_read_nested(&eb->lock, nest);
- eb->lock_owner = current->pid;
trace_btrfs_tree_read_lock(eb, start_ns);
}
@@ -62,7 +61,6 @@ void btrfs_tree_read_lock(struct extent_
int btrfs_try_tree_read_lock(struct extent_buffer *eb)
{
if (down_read_trylock(&eb->lock)) {
- eb->lock_owner = current->pid;
trace_btrfs_try_tree_read_lock(eb);
return 1;
}
@@ -90,7 +88,6 @@ int btrfs_try_tree_write_lock(struct ext
void btrfs_tree_read_unlock(struct extent_buffer *eb)
{
trace_btrfs_tree_read_unlock(eb);
- eb->lock_owner = 0;
up_read(&eb->lock);
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 093/135] btrfs: fix deadlock with fsync+fiemap+transaction commit
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (91 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 092/135] btrfs: dont set lock_owner when locking extent buffer for reading Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 094/135] f2fs: attach inline_data after setting compression Greg Kroah-Hartman
` (49 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Filipe Manana, Josef Bacik, David Sterba
From: Josef Bacik <josef@toxicpanda.com>
commit bf7ba8ee759b7b7a34787ddd8dc3f190a3d7fa24 upstream.
We are hitting the following deadlock in production occasionally
Task 1 Task 2 Task 3 Task 4 Task 5
fsync(A)
start trans
start commit
falloc(A)
lock 5m-10m
start trans
wait for commit
fiemap(A)
lock 0-10m
wait for 5m-10m
(have 0-5m locked)
have btrfs_need_log_full_commit
!full_sync
wait_ordered_extents
finish_ordered_io(A)
lock 0-5m
DEADLOCK
We have an existing dependency of file extent lock -> transaction.
However in fsync if we tried to do the fast logging, but then had to
fall back to committing the transaction, we will be forced to call
btrfs_wait_ordered_range() to make sure all of our extents are updated.
This creates a dependency of transaction -> file extent lock, because
btrfs_finish_ordered_io() will need to take the file extent lock in
order to run the ordered extents.
Fix this by stopping the transaction if we have to do the full commit
and we attempted to do the fast logging. Then attach to the transaction
and commit it if we need to.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/file.c | 67 +++++++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 52 insertions(+), 15 deletions(-)
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2337,25 +2337,62 @@ int btrfs_sync_file(struct file *file, l
*/
btrfs_inode_unlock(inode, BTRFS_ILOCK_MMAP);
- if (ret != BTRFS_NO_LOG_SYNC) {
+ if (ret == BTRFS_NO_LOG_SYNC) {
+ ret = btrfs_end_transaction(trans);
+ goto out;
+ }
+
+ /* We successfully logged the inode, attempt to sync the log. */
+ if (!ret) {
+ ret = btrfs_sync_log(trans, root, &ctx);
if (!ret) {
- ret = btrfs_sync_log(trans, root, &ctx);
- if (!ret) {
- ret = btrfs_end_transaction(trans);
- goto out;
- }
+ ret = btrfs_end_transaction(trans);
+ goto out;
}
- if (!full_sync) {
- ret = btrfs_wait_ordered_range(inode, start, len);
- if (ret) {
- btrfs_end_transaction(trans);
- goto out;
- }
- }
- ret = btrfs_commit_transaction(trans);
- } else {
+ }
+
+ /*
+ * At this point we need to commit the transaction because we had
+ * btrfs_need_log_full_commit() or some other error.
+ *
+ * If we didn't do a full sync we have to stop the trans handle, wait on
+ * the ordered extents, start it again and commit the transaction. If
+ * we attempt to wait on the ordered extents here we could deadlock with
+ * something like fallocate() that is holding the extent lock trying to
+ * start a transaction while some other thread is trying to commit the
+ * transaction while we (fsync) are currently holding the transaction
+ * open.
+ */
+ if (!full_sync) {
ret = btrfs_end_transaction(trans);
+ if (ret)
+ goto out;
+ ret = btrfs_wait_ordered_range(inode, start, len);
+ if (ret)
+ goto out;
+
+ /*
+ * This is safe to use here because we're only interested in
+ * making sure the transaction that had the ordered extents is
+ * committed. We aren't waiting on anything past this point,
+ * we're purely getting the transaction and committing it.
+ */
+ trans = btrfs_attach_transaction_barrier(root);
+ if (IS_ERR(trans)) {
+ ret = PTR_ERR(trans);
+
+ /*
+ * We committed the transaction and there's no currently
+ * running transaction, this means everything we care
+ * about made it to disk and we are done.
+ */
+ if (ret == -ENOENT)
+ ret = 0;
+ goto out;
+ }
}
+
+ ret = btrfs_commit_transaction(trans);
out:
ASSERT(list_empty(&ctx.list));
err = file_check_and_advance_wb_err(file);
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 094/135] f2fs: attach inline_data after setting compression
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (92 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 093/135] btrfs: fix deadlock with fsync+fiemap+transaction commit Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 095/135] iio:humidity:hts221: rearrange iio trigger get and register Greg Kroah-Hartman
` (48 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jaegeuk Kim
From: Jaegeuk Kim <jaegeuk@kernel.org>
commit 4cde00d50707c2ef6647b9b96b2cb40b6eb24397 upstream.
This fixes the below corruption.
[345393.335389] F2FS-fs (vdb): sanity_check_inode: inode (ino=6d0, mode=33206) should not have inline_data, run fsck to fix
Cc: <stable@vger.kernel.org>
Fixes: 677a82b44ebf ("f2fs: fix to do sanity check for inline inode")
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/f2fs/namei.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -91,8 +91,6 @@ static struct inode *f2fs_new_inode(stru
if (test_opt(sbi, INLINE_XATTR))
set_inode_flag(inode, FI_INLINE_XATTR);
- if (test_opt(sbi, INLINE_DATA) && f2fs_may_inline_data(inode))
- set_inode_flag(inode, FI_INLINE_DATA);
if (f2fs_may_inline_dentry(inode))
set_inode_flag(inode, FI_INLINE_DENTRY);
@@ -109,10 +107,6 @@ static struct inode *f2fs_new_inode(stru
f2fs_init_extent_tree(inode, NULL);
- stat_inc_inline_xattr(inode);
- stat_inc_inline_inode(inode);
- stat_inc_inline_dir(inode);
-
F2FS_I(inode)->i_flags =
f2fs_mask_flags(mode, F2FS_I(dir)->i_flags & F2FS_FL_INHERITED);
@@ -129,6 +123,14 @@ static struct inode *f2fs_new_inode(stru
set_compress_context(inode);
}
+ /* Should enable inline_data after compression set */
+ if (test_opt(sbi, INLINE_DATA) && f2fs_may_inline_data(inode))
+ set_inode_flag(inode, FI_INLINE_DATA);
+
+ stat_inc_inline_xattr(inode);
+ stat_inc_inline_inode(inode);
+ stat_inc_inline_dir(inode);
+
f2fs_set_inode_flags(inode);
trace_f2fs_new_inode(inode, 0);
@@ -327,6 +329,9 @@ static void set_compress_inode(struct f2
if (!is_extension_exist(name, ext[i], false))
continue;
+ /* Do not use inline_data with compression */
+ stat_dec_inline_inode(inode);
+ clear_inode_flag(inode, FI_INLINE_DATA);
set_compress_context(inode);
return;
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 095/135] iio:humidity:hts221: rearrange iio trigger get and register
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (93 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 094/135] f2fs: attach inline_data after setting compression Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 096/135] iio:chemical:ccs811: " Greg Kroah-Hartman
` (47 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Rokosov, Andy Shevchenko,
Stable, Jonathan Cameron
From: Dmitry Rokosov <DDRokosov@sberdevices.ru>
commit 10b9c2c33ac706face458feab8965f11743c98c0 upstream.
IIO trigger interface function iio_trigger_get() should be called after
iio_trigger_register() (or its devm analogue) strictly, because of
iio_trigger_get() acquires module refcnt based on the trigger->owner
pointer, which is initialized inside iio_trigger_register() to
THIS_MODULE.
If this call order is wrong, the next iio_trigger_put() (from sysfs
callback or "delete module" path) will dereference "default" module
refcnt, which is incorrect behaviour.
Fixes: e4a70e3e7d84 ("iio: humidity: add support to hts221 rh/temp combo device")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220524181150.9240-6-ddrokosov@sberdevices.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/humidity/hts221_buffer.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/iio/humidity/hts221_buffer.c
+++ b/drivers/iio/humidity/hts221_buffer.c
@@ -135,9 +135,12 @@ int hts221_allocate_trigger(struct iio_d
iio_trigger_set_drvdata(hw->trig, iio_dev);
hw->trig->ops = &hts221_trigger_ops;
+
+ err = devm_iio_trigger_register(hw->dev, hw->trig);
+
iio_dev->trig = iio_trigger_get(hw->trig);
- return devm_iio_trigger_register(hw->dev, hw->trig);
+ return err;
}
static int hts221_buffer_preenable(struct iio_dev *iio_dev)
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 096/135] iio:chemical:ccs811: rearrange iio trigger get and register
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (94 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 095/135] iio:humidity:hts221: rearrange iio trigger get and register Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 097/135] iio:accel:kxcjk-1013: " Greg Kroah-Hartman
` (46 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Rokosov, Andy Shevchenko,
Stable, Jonathan Cameron
From: Dmitry Rokosov <DDRokosov@sberdevices.ru>
commit d710359c0b445e8c03e24f19ae2fb79ce7282260 upstream.
IIO trigger interface function iio_trigger_get() should be called after
iio_trigger_register() (or its devm analogue) strictly, because of
iio_trigger_get() acquires module refcnt based on the trigger->owner
pointer, which is initialized inside iio_trigger_register() to
THIS_MODULE.
If this call order is wrong, the next iio_trigger_put() (from sysfs
callback or "delete module" path) will dereference "default" module
refcnt, which is incorrect behaviour.
Fixes: f1f065d7ac30 ("iio: chemical: ccs811: Add support for data ready trigger")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220524181150.9240-5-ddrokosov@sberdevices.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/chemical/ccs811.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/iio/chemical/ccs811.c
+++ b/drivers/iio/chemical/ccs811.c
@@ -499,11 +499,11 @@ static int ccs811_probe(struct i2c_clien
data->drdy_trig->ops = &ccs811_trigger_ops;
iio_trigger_set_drvdata(data->drdy_trig, indio_dev);
- indio_dev->trig = data->drdy_trig;
- iio_trigger_get(indio_dev->trig);
ret = iio_trigger_register(data->drdy_trig);
if (ret)
goto err_poweroff;
+
+ indio_dev->trig = iio_trigger_get(data->drdy_trig);
}
ret = iio_triggered_buffer_setup(indio_dev, NULL,
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 097/135] iio:accel:kxcjk-1013: rearrange iio trigger get and register
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (95 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 096/135] iio:chemical:ccs811: " Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 098/135] iio:accel:bma180: " Greg Kroah-Hartman
` (45 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Rokosov, Andy Shevchenko,
Stable, Jonathan Cameron
From: Dmitry Rokosov <DDRokosov@sberdevices.ru>
commit ed302925d708f2f97ae5e9fd6c56c16bb34f6629 upstream.
IIO trigger interface function iio_trigger_get() should be called after
iio_trigger_register() (or its devm analogue) strictly, because of
iio_trigger_get() acquires module refcnt based on the trigger->owner
pointer, which is initialized inside iio_trigger_register() to
THIS_MODULE.
If this call order is wrong, the next iio_trigger_put() (from sysfs
callback or "delete module" path) will dereference "default" module
refcnt, which is incorrect behaviour.
Fixes: c1288b833881 ("iio: accel: kxcjk-1013: Increment ref counter for indio_dev->trig")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220524181150.9240-3-ddrokosov@sberdevices.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/accel/kxcjk-1013.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1553,12 +1553,12 @@ static int kxcjk1013_probe(struct i2c_cl
data->dready_trig->ops = &kxcjk1013_trigger_ops;
iio_trigger_set_drvdata(data->dready_trig, indio_dev);
- indio_dev->trig = data->dready_trig;
- iio_trigger_get(indio_dev->trig);
ret = iio_trigger_register(data->dready_trig);
if (ret)
goto err_poweroff;
+ indio_dev->trig = iio_trigger_get(data->dready_trig);
+
data->motion_trig->ops = &kxcjk1013_trigger_ops;
iio_trigger_set_drvdata(data->motion_trig, indio_dev);
ret = iio_trigger_register(data->motion_trig);
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 098/135] iio:accel:bma180: rearrange iio trigger get and register
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (96 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 097/135] iio:accel:kxcjk-1013: " Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 099/135] iio:accel:mxc4005: " Greg Kroah-Hartman
` (44 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Rokosov, Andy Shevchenko,
Stable, Jonathan Cameron
From: Dmitry Rokosov <DDRokosov@sberdevices.ru>
commit e5f3205b04d7f95a2ef43bce4b454a7f264d6923 upstream.
IIO trigger interface function iio_trigger_get() should be called after
iio_trigger_register() (or its devm analogue) strictly, because of
iio_trigger_get() acquires module refcnt based on the trigger->owner
pointer, which is initialized inside iio_trigger_register() to
THIS_MODULE.
If this call order is wrong, the next iio_trigger_put() (from sysfs
callback or "delete module" path) will dereference "default" module
refcnt, which is incorrect behaviour.
Fixes: 0668a4e4d297 ("iio: accel: bma180: Fix indio_dev->trig assignment")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220524181150.9240-2-ddrokosov@sberdevices.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/accel/bma180.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -1006,11 +1006,12 @@ static int bma180_probe(struct i2c_clien
data->trig->ops = &bma180_trigger_ops;
iio_trigger_set_drvdata(data->trig, indio_dev);
- indio_dev->trig = iio_trigger_get(data->trig);
ret = iio_trigger_register(data->trig);
if (ret)
goto err_trigger_free;
+
+ indio_dev->trig = iio_trigger_get(data->trig);
}
ret = iio_triggered_buffer_setup(indio_dev, NULL,
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 099/135] iio:accel:mxc4005: rearrange iio trigger get and register
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (97 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 098/135] iio:accel:bma180: " Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 100/135] iio: accel: mma8452: ignore the return value of reset operation Greg Kroah-Hartman
` (43 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Rokosov, Andy Shevchenko,
Stable, Jonathan Cameron
From: Dmitry Rokosov <DDRokosov@sberdevices.ru>
commit 9354c224c9b4f55847a0de3e968cba2ebf15af3b upstream.
IIO trigger interface function iio_trigger_get() should be called after
iio_trigger_register() (or its devm analogue) strictly, because of
iio_trigger_get() acquires module refcnt based on the trigger->owner
pointer, which is initialized inside iio_trigger_register() to
THIS_MODULE.
If this call order is wrong, the next iio_trigger_put() (from sysfs
callback or "delete module" path) will dereference "default" module
refcnt, which is incorrect behaviour.
Fixes: 47196620c82f ("iio: mxc4005: add data ready trigger for mxc4005")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220524181150.9240-4-ddrokosov@sberdevices.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/accel/mxc4005.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/iio/accel/mxc4005.c
+++ b/drivers/iio/accel/mxc4005.c
@@ -456,8 +456,6 @@ static int mxc4005_probe(struct i2c_clie
data->dready_trig->ops = &mxc4005_trigger_ops;
iio_trigger_set_drvdata(data->dready_trig, indio_dev);
- indio_dev->trig = data->dready_trig;
- iio_trigger_get(indio_dev->trig);
ret = devm_iio_trigger_register(&client->dev,
data->dready_trig);
if (ret) {
@@ -465,6 +463,8 @@ static int mxc4005_probe(struct i2c_clie
"failed to register trigger\n");
return ret;
}
+
+ indio_dev->trig = iio_trigger_get(data->dready_trig);
}
return devm_iio_device_register(&client->dev, indio_dev);
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 100/135] iio: accel: mma8452: ignore the return value of reset operation
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (98 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 099/135] iio:accel:mxc4005: " Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 101/135] iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up() Greg Kroah-Hartman
` (42 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Haibo Chen, Hans de Goede, Stable,
Jonathan Cameron
From: Haibo Chen <haibo.chen@nxp.com>
commit bf745142cc0a3e1723f9207fb0c073c88464b7b4 upstream.
On fxls8471, after set the reset bit, the device will reset immediately,
will not give ACK. So ignore the return value of this reset operation,
let the following code logic to check whether the reset operation works.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Fixes: ecabae713196 ("iio: mma8452: Initialise before activating")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/1655292718-14287-1-git-send-email-haibo.chen@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/accel/mma8452.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1493,10 +1493,14 @@ static int mma8452_reset(struct i2c_clie
int i;
int ret;
- ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG2,
+ /*
+ * Find on fxls8471, after config reset bit, it reset immediately,
+ * and will not give ACK, so here do not check the return value.
+ * The following code will read the reset register, and check whether
+ * this reset works.
+ */
+ i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG2,
MMA8452_CTRL_REG2_RST);
- if (ret < 0)
- return ret;
for (i = 0; i < 10; i++) {
usleep_range(100, 200);
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 101/135] iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (99 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 100/135] iio: accel: mma8452: ignore the return value of reset operation Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 102/135] iio: trigger: sysfs: fix use-after-free on remove Greg Kroah-Hartman
` (41 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zheyu Ma, Linus Walleij, Stable,
Jonathan Cameron
From: Zheyu Ma <zheyuma97@gmail.com>
commit b2f5ad97645e1deb5ca9bcb7090084b92cae35d2 upstream.
The driver should disable regulators when fails at regmap_update_bits().
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220510092431.1711284-1-zheyuma97@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/gyro/mpu3050-core.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/iio/gyro/mpu3050-core.c
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -876,6 +876,7 @@ static int mpu3050_power_up(struct mpu30
ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM,
MPU3050_PWR_MGM_SLEEP, 0);
if (ret) {
+ regulator_bulk_disable(ARRAY_SIZE(mpu3050->regs), mpu3050->regs);
dev_err(mpu3050->dev, "error setting power mode\n");
return ret;
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 102/135] iio: trigger: sysfs: fix use-after-free on remove
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (100 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 101/135] iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up() Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 103/135] iio: adc: stm32: fix maximum clock rate for stm32mp15x Greg Kroah-Hartman
` (40 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vincent Whitchurch,
Lars-Peter Clausen, Stable, Jonathan Cameron
From: Vincent Whitchurch <vincent.whitchurch@axis.com>
commit 78601726d4a59a291acc5a52da1d3a0a6831e4e8 upstream.
Ensure that the irq_work has completed before the trigger is freed.
==================================================================
BUG: KASAN: use-after-free in irq_work_run_list
Read of size 8 at addr 0000000064702248 by task python3/25
Call Trace:
irq_work_run_list
irq_work_tick
update_process_times
tick_sched_handle
tick_sched_timer
__hrtimer_run_queues
hrtimer_interrupt
Allocated by task 25:
kmem_cache_alloc_trace
iio_sysfs_trig_add
dev_attr_store
sysfs_kf_write
kernfs_fop_write_iter
new_sync_write
vfs_write
ksys_write
sys_write
Freed by task 25:
kfree
iio_sysfs_trig_remove
dev_attr_store
sysfs_kf_write
kernfs_fop_write_iter
new_sync_write
vfs_write
ksys_write
sys_write
==================================================================
Fixes: f38bc926d022 ("staging:iio:sysfs-trigger: Use irq_work to properly active trigger")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20220519091925.1053897-1-vincent.whitchurch@axis.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/trigger/iio-trig-sysfs.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/iio/trigger/iio-trig-sysfs.c
+++ b/drivers/iio/trigger/iio-trig-sysfs.c
@@ -195,6 +195,7 @@ static int iio_sysfs_trigger_remove(int
}
iio_trigger_unregister(t->trig);
+ irq_work_sync(&t->work);
iio_trigger_free(t->trig);
list_del(&t->l);
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 103/135] iio: adc: stm32: fix maximum clock rate for stm32mp15x
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (101 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 102/135] iio: trigger: sysfs: fix use-after-free on remove Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 104/135] iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) Greg Kroah-Hartman
` (39 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Olivier Moysan, Fabrice Gasnier,
Stable, Jonathan Cameron
From: Olivier Moysan <olivier.moysan@foss.st.com>
commit 990539486e7e311fb5dab1bf4d85d1a8973ae644 upstream.
Change maximum STM32 ADC input clock rate to 36MHz, as specified
in STM32MP15x datasheets.
Fixes: d58c67d1d851 ("iio: adc: stm32-adc: add support for STM32MP1")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220609095234.375925-1-olivier.moysan@foss.st.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/stm32-adc-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -809,7 +809,7 @@ static const struct stm32_adc_priv_cfg s
static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
.regs = &stm32h7_adc_common_regs,
.clk_sel = stm32h7_adc_clk_sel,
- .max_clk_rate_hz = 40000000,
+ .max_clk_rate_hz = 36000000,
.has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD,
.num_irqs = 2,
};
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 104/135] iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (102 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 103/135] iio: adc: stm32: fix maximum clock rate for stm32mp15x Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 105/135] iio: afe: rescale: Fix boolean logic bug Greg Kroah-Hartman
` (38 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jean-Baptiste Maneyrol, Stable,
Jonathan Cameron
From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
commit 106b391e1b859100a3f38f0ad874236e9be06bde upstream.
The 0 value used for INV_CHIP_ICM42600 was not working since the
match in i2c/spi was checking against NULL value.
To keep this check, add a first INV_CHIP_INVALID 0 value as safe
guard.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20220609102301.4794-1-jmaneyrol@invensense.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/inv_icm42600/inv_icm42600.h | 1 +
drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600.h
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
@@ -17,6 +17,7 @@
#include "inv_icm42600_buffer.h"
enum inv_icm42600_chip {
+ INV_CHIP_INVALID,
INV_CHIP_ICM42600,
INV_CHIP_ICM42602,
INV_CHIP_ICM42605,
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -565,7 +565,7 @@ int inv_icm42600_core_probe(struct regma
bool open_drain;
int ret;
- if (chip < 0 || chip >= INV_CHIP_NB) {
+ if (chip <= INV_CHIP_INVALID || chip >= INV_CHIP_NB) {
dev_err(dev, "invalid chip = %d\n", chip);
return -ENODEV;
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 105/135] iio: afe: rescale: Fix boolean logic bug
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (103 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 104/135] iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 106/135] iio: adc: stm32: Fix ADCs iteration in irq handler Greg Kroah-Hartman
` (37 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Liam Beguin, Linus Walleij,
Peter Rosin, Jonathan Cameron
From: Linus Walleij <linus.walleij@linaro.org>
commit 9decacd8b3a432316d61c4366f302e63384cb08d upstream.
When introducing support for processed channels I needed
to invert the expression:
if (!iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) ||
!iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE))
dev_err(dev, "source channel does not support raw/scale\n");
To the inverse, meaning detect when we can usse raw+scale
rather than when we can not. This was the result:
if (iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) ||
iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE))
dev_info(dev, "using raw+scale source channel\n");
Ooops. Spot the error. Yep old George Boole came up and bit me.
That should be an &&.
The current code "mostly works" because we have not run into
systems supporting only raw but not scale or only scale but not
raw, and I doubt there are few using the rescaler on anything
such, but let's fix the logic.
Cc: Liam Beguin <liambeguin@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 53ebee949980 ("iio: afe: iio-rescale: Support processed channels")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Liam Beguin <liambeguin@gmail.com>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20220524075448.140238-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/afe/iio-rescale.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -148,7 +148,7 @@ static int rescale_configure_channel(str
chan->ext_info = rescale->ext_info;
chan->type = rescale->cfg->type;
- if (iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) ||
+ if (iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) &&
iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE)) {
dev_info(dev, "using raw+scale source channel\n");
} else if (iio_channel_has_info(schan, IIO_CHAN_INFO_PROCESSED)) {
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 106/135] iio: adc: stm32: Fix ADCs iteration in irq handler
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (104 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 105/135] iio: afe: rescale: Fix boolean logic bug Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 107/135] iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message Greg Kroah-Hartman
` (36 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yannick Brosseau, Fabrice Gasnier,
Stable, Jonathan Cameron
From: Yannick Brosseau <yannick.brosseau@gmail.com>
commit d2214cca4d3eadc74eac9e30301ec7cad5355f00 upstream.
The irq handler was only checking the mask for the first ADCs in the case of the
F4 and H7 generation, since it was iterating up to the num_irq value. This patch add
the maximum number of ADC in the common register, which map to the number of entries of
eoc_msk and ovr_msk in stm32_adc_common_regs. This allow the handler to check all ADCs in
that module.
Tested on a STM32F429NIH6.
Fixes: 695e2f5c289b ("iio: adc: stm32-adc: fix a regression when using dma and irq")
Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220516203939.3498673-2-yannick.brosseau@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/stm32-adc-core.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -64,6 +64,7 @@ struct stm32_adc_priv;
* @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
* @has_syscfg: SYSCFG capability flags
* @num_irqs: number of interrupt lines
+ * @num_adcs: maximum number of ADC instances in the common registers
*/
struct stm32_adc_priv_cfg {
const struct stm32_adc_common_regs *regs;
@@ -71,6 +72,7 @@ struct stm32_adc_priv_cfg {
u32 max_clk_rate_hz;
unsigned int has_syscfg;
unsigned int num_irqs;
+ unsigned int num_adcs;
};
/**
@@ -352,7 +354,7 @@ static void stm32_adc_irq_handler(struct
* before invoking the interrupt handler (e.g. call ISR only for
* IRQ-enabled ADCs).
*/
- for (i = 0; i < priv->cfg->num_irqs; i++) {
+ for (i = 0; i < priv->cfg->num_adcs; i++) {
if ((status & priv->cfg->regs->eoc_msk[i] &&
stm32_adc_eoc_enabled(priv, i)) ||
(status & priv->cfg->regs->ovr_msk[i]))
@@ -796,6 +798,7 @@ static const struct stm32_adc_priv_cfg s
.clk_sel = stm32f4_adc_clk_sel,
.max_clk_rate_hz = 36000000,
.num_irqs = 1,
+ .num_adcs = 3,
};
static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
@@ -804,6 +807,7 @@ static const struct stm32_adc_priv_cfg s
.max_clk_rate_hz = 36000000,
.has_syscfg = HAS_VBOOSTER,
.num_irqs = 1,
+ .num_adcs = 2,
};
static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
@@ -812,6 +816,7 @@ static const struct stm32_adc_priv_cfg s
.max_clk_rate_hz = 36000000,
.has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD,
.num_irqs = 2,
+ .num_adcs = 2,
};
static const struct of_device_id stm32_adc_of_match[] = {
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 107/135] iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (105 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 106/135] iio: adc: stm32: Fix ADCs iteration in irq handler Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 108/135] iio: adc: axp288: Override TS pin bias current for some models Greg Kroah-Hartman
` (35 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yannick Brosseau, Fabrice Gasnier,
Stable, Jonathan Cameron
From: Yannick Brosseau <yannick.brosseau@gmail.com>
commit 99bded02dae5e1e2312813506c41dc8db2fb656c upstream.
The check for spurious IRQs introduced in 695e2f5c289bb assumed that the bits
in the control and status registers are aligned. This is true for the H7 and MP1
version, but not the F4. The interrupt was then never handled on the F4.
Instead of increasing the complexity of the comparison and check each bit specifically,
we remove this check completely and rely on the generic handler for spurious IRQs.
Fixes: 695e2f5c289b ("iio: adc: stm32-adc: fix a regression when using dma and irq")
Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220516203939.3498673-3-yannick.brosseau@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/stm32-adc.c | 10 ----------
1 file changed, 10 deletions(-)
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1259,7 +1259,6 @@ static irqreturn_t stm32_adc_threaded_is
struct stm32_adc *adc = iio_priv(indio_dev);
const struct stm32_adc_regspec *regs = adc->cfg->regs;
u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
- u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);
/* Check ovr status right now, as ovr mask should be already disabled */
if (status & regs->isr_ovr.mask) {
@@ -1274,11 +1273,6 @@ static irqreturn_t stm32_adc_threaded_is
return IRQ_HANDLED;
}
- if (!(status & mask))
- dev_err_ratelimited(&indio_dev->dev,
- "Unexpected IRQ: IER=0x%08x, ISR=0x%08x\n",
- mask, status);
-
return IRQ_NONE;
}
@@ -1288,10 +1282,6 @@ static irqreturn_t stm32_adc_isr(int irq
struct stm32_adc *adc = iio_priv(indio_dev);
const struct stm32_adc_regspec *regs = adc->cfg->regs;
u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
- u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);
-
- if (!(status & mask))
- return IRQ_WAKE_THREAD;
if (status & regs->isr_ovr.mask) {
/*
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 108/135] iio: adc: axp288: Override TS pin bias current for some models
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (106 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 107/135] iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 109/135] iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() Greg Kroah-Hartman
` (34 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Stable, Jonathan Cameron
From: Hans de Goede <hdegoede@redhat.com>
commit 048058399f19d43cf21de9f5d36cd8144337d004 upstream.
Since commit 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling") we
preserve the bias current set by the firmware at boot. This fixes issues
we were seeing on various models.
Some models like the Nuvision Solo 10 Draw tablet actually need the
old hardcoded 80ųA bias current for battery temperature monitoring
to work properly.
Add a quirk entry for the Nuvision Solo 10 Draw to the DMI quirk table
to restore setting the bias current to 80ųA on this model.
Fixes: 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215882
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220506095040.21008-1-hdegoede@redhat.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/axp288_adc.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -196,6 +196,14 @@ static const struct dmi_system_id axp288
},
.driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA,
},
+ {
+ /* Nuvision Solo 10 Draw */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TMAX"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TM101W610L"),
+ },
+ .driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA,
+ },
{}
};
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 109/135] iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (107 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 108/135] iio: adc: axp288: Override TS pin bias current for some models Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 110/135] iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client Greg Kroah-Hartman
` (33 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Jialin Zhang,
Lad Prabhakar, Geert Uytterhoeven, Stable, Jonathan Cameron
From: Jialin Zhang <zhangjialin11@huawei.com>
commit d836715f588ea15f905f607c27bc693587058db4 upstream.
fwnode_handle_put() should be used when terminating
device_for_each_child_node() iteration with break or return to prevent
stale device node references from being left behind.
Fixes: d484c21bacfa ("iio: adc: Add driver for Renesas RZ/G2L A/D converter")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220517033526.2035735-1-zhangjialin11@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/rzg2l_adc.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/iio/adc/rzg2l_adc.c
+++ b/drivers/iio/adc/rzg2l_adc.c
@@ -334,11 +334,15 @@ static int rzg2l_adc_parse_properties(st
i = 0;
device_for_each_child_node(&pdev->dev, fwnode) {
ret = fwnode_property_read_u32(fwnode, "reg", &channel);
- if (ret)
+ if (ret) {
+ fwnode_handle_put(fwnode);
return ret;
+ }
- if (channel >= RZG2L_ADC_MAX_CHANNELS)
+ if (channel >= RZG2L_ADC_MAX_CHANNELS) {
+ fwnode_handle_put(fwnode);
return -EINVAL;
+ }
chan_array[i].type = IIO_VOLTAGE;
chan_array[i].indexed = 1;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 110/135] iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (108 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 109/135] iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 111/135] iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() Greg Kroah-Hartman
` (32 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Stable, Jonathan Cameron
From: Miaoqian Lin <linmq006@gmail.com>
commit ada7b0c0dedafd7d059115adf49e48acba3153a8 upstream.
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: ef04070692a2 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220524074517.45268-1-linmq006@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/adi-axi-adc.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/iio/adc/adi-axi-adc.c
+++ b/drivers/iio/adc/adi-axi-adc.c
@@ -322,16 +322,19 @@ static struct adi_axi_adc_client *adi_ax
if (!try_module_get(cl->dev->driver->owner)) {
mutex_unlock(®istered_clients_lock);
+ of_node_put(cln);
return ERR_PTR(-ENODEV);
}
get_device(cl->dev);
cl->info = info;
mutex_unlock(®istered_clients_lock);
+ of_node_put(cln);
return cl;
}
mutex_unlock(®istered_clients_lock);
+ of_node_put(cln);
return ERR_PTR(-EPROBE_DEFER);
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 111/135] iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (109 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 110/135] iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:21 ` [PATCH 5.15 112/135] xtensa: xtfpga: Fix refcount leak bug in setup Greg Kroah-Hartman
` (31 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Jialin Zhang, Stable,
Jonathan Cameron
From: Jialin Zhang <zhangjialin11@huawei.com>
commit 47dcf770abc793f347a65a24c24d550c936f08b0 upstream.
fwnode_handle_put() should be used when terminating
device_for_each_child_node() iteration with break or return to prevent
stale device node references from being left behind.
Fixes: d935eddd2799 ("iio: adc: Add driver for Texas Instruments ADS131E0x ADC family")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com>
Link: https://lore.kernel.org/r/20220517033020.2033324-1-zhangjialin11@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/ti-ads131e08.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/iio/adc/ti-ads131e08.c
+++ b/drivers/iio/adc/ti-ads131e08.c
@@ -739,7 +739,7 @@ static int ads131e08_alloc_channels(stru
device_for_each_child_node(dev, node) {
ret = fwnode_property_read_u32(node, "reg", &channel);
if (ret)
- return ret;
+ goto err_child_out;
ret = fwnode_property_read_u32(node, "ti,gain", &tmp);
if (ret) {
@@ -747,7 +747,7 @@ static int ads131e08_alloc_channels(stru
} else {
ret = ads131e08_pga_gain_to_field_value(st, tmp);
if (ret < 0)
- return ret;
+ goto err_child_out;
channel_config[i].pga_gain = tmp;
}
@@ -758,7 +758,7 @@ static int ads131e08_alloc_channels(stru
} else {
ret = ads131e08_validate_channel_mux(st, tmp);
if (ret)
- return ret;
+ goto err_child_out;
channel_config[i].mux = tmp;
}
@@ -784,6 +784,10 @@ static int ads131e08_alloc_channels(stru
st->channel_config = channel_config;
return 0;
+
+err_child_out:
+ fwnode_handle_put(node);
+ return ret;
}
static void ads131e08_regulator_disable(void *data)
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 112/135] xtensa: xtfpga: Fix refcount leak bug in setup
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (110 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 111/135] iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() Greg Kroah-Hartman
@ 2022-06-27 11:21 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 113/135] xtensa: Fix refcount leak bug in time.c Greg Kroah-Hartman
` (30 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:21 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Liang He, Max Filippov
From: Liang He <windhl@126.com>
commit 173940b3ae40114d4179c251a98ee039dc9cd5b3 upstream.
In machine_setup(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617115323.4046905-1-windhl@126.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/xtensa/platforms/xtfpga/setup.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/xtensa/platforms/xtfpga/setup.c
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -133,6 +133,7 @@ static int __init machine_setup(void)
if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc")))
update_local_mac(eth);
+ of_node_put(eth);
return 0;
}
arch_initcall(machine_setup);
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 113/135] xtensa: Fix refcount leak bug in time.c
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (111 preceding siblings ...)
2022-06-27 11:21 ` [PATCH 5.15 112/135] xtensa: xtfpga: Fix refcount leak bug in setup Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 114/135] parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI Greg Kroah-Hartman
` (29 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Liang He, Max Filippov
From: Liang He <windhl@126.com>
commit a0117dc956429f2ede17b323046e1968d1849150 upstream.
In calibrate_ccount(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617124432.4049006-1-windhl@126.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/xtensa/kernel/time.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -154,6 +154,7 @@ static void __init calibrate_ccount(void
cpu = of_find_compatible_node(NULL, NULL, "cdns,xtensa-cpu");
if (cpu) {
clk = of_clk_get(cpu, 0);
+ of_node_put(cpu);
if (!IS_ERR(clk)) {
ccount_freq = clk_get_rate(clk);
return;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 114/135] parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (112 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 113/135] xtensa: Fix refcount leak bug in time.c Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 115/135] parisc: Enable ARCH_HAS_STRICT_MODULE_RWX Greg Kroah-Hartman
` (28 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Helge Deller, kernel test robot
From: Helge Deller <deller@gmx.de>
commit 1d0811b03eb30b2f0793acaa96c6ce90b8b9c87a upstream.
Fix this build error noticed by the kernel test robot:
drivers/video/console/sticore.c:1132:5: error: redefinition of 'fb_is_primary_device'
arch/parisc/include/asm/fb.h:18:19: note: previous definition of 'fb_is_primary_device'
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/parisc/include/asm/fb.h | 2 +-
drivers/video/console/sticore.c | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
--- a/arch/parisc/include/asm/fb.h
+++ b/arch/parisc/include/asm/fb.h
@@ -12,7 +12,7 @@ static inline void fb_pgprotect(struct f
pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
}
-#if defined(CONFIG_STI_CONSOLE) || defined(CONFIG_FB_STI)
+#if defined(CONFIG_FB_STI)
int fb_is_primary_device(struct fb_info *info);
#else
static inline int fb_is_primary_device(struct fb_info *info)
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -1127,6 +1127,7 @@ int sti_call(const struct sti_struct *st
return ret;
}
+#if defined(CONFIG_FB_STI)
/* check if given fb_info is the primary device */
int fb_is_primary_device(struct fb_info *info)
{
@@ -1142,6 +1143,7 @@ int fb_is_primary_device(struct fb_info
return (sti->info == info);
}
EXPORT_SYMBOL(fb_is_primary_device);
+#endif
MODULE_AUTHOR("Philipp Rumpf, Helge Deller, Thomas Bogendoerfer");
MODULE_DESCRIPTION("Core STI driver for HP's NGLE series graphics cards in HP PARISC machines");
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 115/135] parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (113 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 114/135] parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 116/135] powerpc/microwatt: wire up rng during setup_arch() Greg Kroah-Hartman
` (27 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Helge Deller, John David Anglin
From: Helge Deller <deller@gmx.de>
commit 0a1355db36718178becd2bfe728a023933d73123 upstream.
Fix a boot crash on a c8000 machine as reported by Dave. Basically it changes
patch_map() to return an alias mapping to the to-be-patched code in order to
prevent writing to write-protected memory.
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.2+
Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/parisc/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -9,6 +9,7 @@ config PARISC
select ARCH_WANT_FRAME_POINTERS
select ARCH_HAS_ELF_RANDOMIZE
select ARCH_HAS_STRICT_KERNEL_RWX
+ select ARCH_HAS_STRICT_MODULE_RWX
select ARCH_HAS_UBSAN_SANITIZE_ALL
select ARCH_NO_SG_CHAIN
select ARCH_SUPPORTS_HUGETLBFS if PA20
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 116/135] powerpc/microwatt: wire up rng during setup_arch()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (114 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 115/135] parisc: Enable ARCH_HAS_STRICT_MODULE_RWX Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 117/135] powerpc: Enable execve syscall exit tracepoint Greg Kroah-Hartman
` (26 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason A. Donenfeld, Christophe Leroy,
Michael Ellerman
From: Jason A. Donenfeld <Jason@zx2c4.com>
commit 20a9689b3607456d92c6fb764501f6a95950b098 upstream.
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: c25769fddaec ("powerpc/microwatt: Add support for hardware random number generator")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-2-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/platforms/microwatt/microwatt.h | 7 +++++++
arch/powerpc/platforms/microwatt/rng.c | 10 +++-------
arch/powerpc/platforms/microwatt/setup.c | 8 ++++++++
3 files changed, 18 insertions(+), 7 deletions(-)
create mode 100644 arch/powerpc/platforms/microwatt/microwatt.h
diff --git a/arch/powerpc/platforms/microwatt/microwatt.h b/arch/powerpc/platforms/microwatt/microwatt.h
new file mode 100644
index 000000000000..335417e95e66
--- /dev/null
+++ b/arch/powerpc/platforms/microwatt/microwatt.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _MICROWATT_H
+#define _MICROWATT_H
+
+void microwatt_rng_init(void);
+
+#endif /* _MICROWATT_H */
diff --git a/arch/powerpc/platforms/microwatt/rng.c b/arch/powerpc/platforms/microwatt/rng.c
index 7bc4d1cbfaf0..8ece87d005c8 100644
--- a/arch/powerpc/platforms/microwatt/rng.c
+++ b/arch/powerpc/platforms/microwatt/rng.c
@@ -11,6 +11,7 @@
#include <asm/archrandom.h>
#include <asm/cputable.h>
#include <asm/machdep.h>
+#include "microwatt.h"
#define DARN_ERR 0xFFFFFFFFFFFFFFFFul
@@ -29,7 +30,7 @@ static int microwatt_get_random_darn(unsigned long *v)
return 1;
}
-static __init int rng_init(void)
+void __init microwatt_rng_init(void)
{
unsigned long val;
int i;
@@ -37,12 +38,7 @@ static __init int rng_init(void)
for (i = 0; i < 10; i++) {
if (microwatt_get_random_darn(&val)) {
ppc_md.get_random_seed = microwatt_get_random_darn;
- return 0;
+ return;
}
}
-
- pr_warn("Unable to use DARN for get_random_seed()\n");
-
- return -EIO;
}
-machine_subsys_initcall(, rng_init);
diff --git a/arch/powerpc/platforms/microwatt/setup.c b/arch/powerpc/platforms/microwatt/setup.c
index 0b02603bdb74..6b32539395a4 100644
--- a/arch/powerpc/platforms/microwatt/setup.c
+++ b/arch/powerpc/platforms/microwatt/setup.c
@@ -16,6 +16,8 @@
#include <asm/xics.h>
#include <asm/udbg.h>
+#include "microwatt.h"
+
static void __init microwatt_init_IRQ(void)
{
xics_init();
@@ -32,10 +34,16 @@ static int __init microwatt_populate(void)
}
machine_arch_initcall(microwatt, microwatt_populate);
+static void __init microwatt_setup_arch(void)
+{
+ microwatt_rng_init();
+}
+
define_machine(microwatt) {
.name = "microwatt",
.probe = microwatt_probe,
.init_IRQ = microwatt_init_IRQ,
+ .setup_arch = microwatt_setup_arch,
.progress = udbg_progress,
.calibrate_decr = generic_calibrate_decr,
};
--
2.36.1
^ permalink raw reply related [flat|nested] 147+ messages in thread* [PATCH 5.15 117/135] powerpc: Enable execve syscall exit tracepoint
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (115 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 116/135] powerpc/microwatt: wire up rng during setup_arch() Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 118/135] powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address Greg Kroah-Hartman
` (25 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Naveen N. Rao, Sumit Dubey2,
Michael Ellerman
From: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
commit ec6d0dde71d760aa60316f8d1c9a1b0d99213529 upstream.
On execve[at], we are zero'ing out most of the thread register state
including gpr[0], which contains the syscall number. Due to this, we
fail to trigger the syscall exit tracepoint properly. Fix this by
retaining gpr[0] in the thread register state.
Before this patch:
# tail /sys/kernel/debug/tracing/trace
cat-123 [000] ..... 61.449351: sys_execve(filename:
7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8)
cat-124 [000] ..... 62.428481: sys_execve(filename:
7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8)
echo-125 [000] ..... 65.813702: sys_execve(filename:
7fffa6b23378, argv: 7fffa6b233a0, envp: 7fffa6b233b0)
echo-125 [000] ..... 65.822214: sys_execveat(fd: 0,
filename: 1009ac48, argv: 7ffff65d0c98, envp: 7ffff65d0ca8, flags: 0)
After this patch:
# tail /sys/kernel/debug/tracing/trace
cat-127 [000] ..... 100.416262: sys_execve(filename:
7fffa41b3448, argv: 7fffa41b33e0, envp: 7fffa41b33f8)
cat-127 [000] ..... 100.418203: sys_execve -> 0x0
echo-128 [000] ..... 103.873968: sys_execve(filename:
7fffa41b3378, argv: 7fffa41b33a0, envp: 7fffa41b33b0)
echo-128 [000] ..... 103.875102: sys_execve -> 0x0
echo-128 [000] ..... 103.882097: sys_execveat(fd: 0,
filename: 1009ac48, argv: 7fffd10d2148, envp: 7fffd10d2158, flags: 0)
echo-128 [000] ..... 103.883225: sys_execveat -> 0x0
Cc: stable@vger.kernel.org
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Sumit Dubey2 <Sumit.Dubey2@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220609103328.41306-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/kernel/process.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1818,7 +1818,7 @@ void start_thread(struct pt_regs *regs,
tm_reclaim_current(0);
#endif
- memset(regs->gpr, 0, sizeof(regs->gpr));
+ memset(®s->gpr[1], 0, sizeof(regs->gpr) - sizeof(regs->gpr[0]));
regs->ctr = 0;
regs->link = 0;
regs->xer = 0;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 118/135] powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (116 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 117/135] powerpc: Enable execve syscall exit tracepoint Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 119/135] powerpc/powernv: wire up rng during setup_arch Greg Kroah-Hartman
` (24 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sathvika Vasireddy, Andrew Donnellan,
Tyrel Datwyler, Nathan Lynch, Michael Ellerman
From: Andrew Donnellan <ajd@linux.ibm.com>
commit 7bc08056a6dabc3a1442216daf527edf61ac24b6 upstream.
Add a special case to block_rtas_call() to allow the ibm,platform-dump RTAS
call through the RTAS filter if the buffer address is 0.
According to PAPR, ibm,platform-dump is called with a null buffer address
to notify the platform firmware that processing of a particular dump is
finished.
Without this, on a pseries machine with CONFIG_PPC_RTAS_FILTER enabled, an
application such as rtas_errd that is attempting to retrieve a dump will
encounter an error at the end of the retrieval process.
Fixes: bd59380c5ba4 ("powerpc/rtas: Restrict RTAS requests from userspace")
Cc: stable@vger.kernel.org
Reported-by: Sathvika Vasireddy <sathvika@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220614134952.156010-1-ajd@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/kernel/rtas.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -983,7 +983,7 @@ static struct rtas_filter rtas_filters[]
{ "get-time-of-day", -1, -1, -1, -1, -1 },
{ "ibm,get-vpd", -1, 0, -1, 1, 2 },
{ "ibm,lpar-perftools", -1, 2, 3, -1, -1 },
- { "ibm,platform-dump", -1, 4, 5, -1, -1 },
+ { "ibm,platform-dump", -1, 4, 5, -1, -1 }, /* Special cased */
{ "ibm,read-slot-reset-state", -1, -1, -1, -1, -1 },
{ "ibm,scan-log-dump", -1, 0, 1, -1, -1 },
{ "ibm,set-dynamic-indicator", -1, 2, -1, -1, -1 },
@@ -1032,6 +1032,15 @@ static bool block_rtas_call(int token, i
size = 1;
end = base + size - 1;
+
+ /*
+ * Special case for ibm,platform-dump - NULL buffer
+ * address is used to indicate end of dump processing
+ */
+ if (!strcmp(f->name, "ibm,platform-dump") &&
+ base == 0)
+ return false;
+
if (!in_rmo_buf(base, end))
goto err;
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 119/135] powerpc/powernv: wire up rng during setup_arch
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (117 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 118/135] powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 120/135] drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl() Greg Kroah-Hartman
` (23 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason A. Donenfeld, Christophe Leroy,
Michael Ellerman
From: Jason A. Donenfeld <Jason@zx2c4.com>
commit f3eac426657d985b97c92fa5f7ae1d43f04721f3 upstream.
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call.
Complicating things, however, is that POWER8 systems need some per-cpu
state and kmalloc, which isn't available at this stage. So we split
things up into an early phase and a later opportunistic phase. This
commit also removes some noisy log messages that don't add much.
Fixes: a4da0d50b2a0 ("powerpc: Implement arch_get_random_long/int() for powernv")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Add of_node_put(), use pnv naming, minor change log editing]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220621140849.127227-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/platforms/powernv/powernv.h | 2 +
arch/powerpc/platforms/powernv/rng.c | 52 +++++++++++++++++++++----------
arch/powerpc/platforms/powernv/setup.c | 2 +
3 files changed, 40 insertions(+), 16 deletions(-)
--- a/arch/powerpc/platforms/powernv/powernv.h
+++ b/arch/powerpc/platforms/powernv/powernv.h
@@ -42,4 +42,6 @@ ssize_t memcons_copy(struct memcons *mc,
u32 memcons_get_size(struct memcons *mc);
struct memcons *memcons_init(struct device_node *node, const char *mc_prop_name);
+void pnv_rng_init(void);
+
#endif /* _POWERNV_H */
--- a/arch/powerpc/platforms/powernv/rng.c
+++ b/arch/powerpc/platforms/powernv/rng.c
@@ -17,6 +17,7 @@
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/smp.h>
+#include "powernv.h"
#define DARN_ERR 0xFFFFFFFFFFFFFFFFul
@@ -28,7 +29,6 @@ struct powernv_rng {
static DEFINE_PER_CPU(struct powernv_rng *, powernv_rng);
-
int powernv_hwrng_present(void)
{
struct powernv_rng *rng;
@@ -98,9 +98,6 @@ static int initialise_darn(void)
return 0;
}
}
-
- pr_warn("Unable to use DARN for get_random_seed()\n");
-
return -EIO;
}
@@ -163,32 +160,55 @@ static __init int rng_create(struct devi
rng_init_per_cpu(rng, dn);
- pr_info_once("Registering arch random hook.\n");
-
ppc_md.get_random_seed = powernv_get_random_long;
return 0;
}
-static __init int rng_init(void)
+static int __init pnv_get_random_long_early(unsigned long *v)
{
struct device_node *dn;
- int rc;
+
+ if (!slab_is_available())
+ return 0;
+
+ if (cmpxchg(&ppc_md.get_random_seed, pnv_get_random_long_early,
+ NULL) != pnv_get_random_long_early)
+ return 0;
for_each_compatible_node(dn, NULL, "ibm,power-rng") {
- rc = rng_create(dn);
- if (rc) {
- pr_err("Failed creating rng for %pOF (%d).\n",
- dn, rc);
+ if (rng_create(dn))
continue;
- }
-
/* Create devices for hwrng driver */
of_platform_device_create(dn, NULL, NULL);
}
- initialise_darn();
+ if (!ppc_md.get_random_seed)
+ return 0;
+ return ppc_md.get_random_seed(v);
+}
+
+void __init pnv_rng_init(void)
+{
+ struct device_node *dn;
+ /* Prefer darn over the rest. */
+ if (!initialise_darn())
+ return;
+
+ dn = of_find_compatible_node(NULL, NULL, "ibm,power-rng");
+ if (dn)
+ ppc_md.get_random_seed = pnv_get_random_long_early;
+
+ of_node_put(dn);
+}
+
+static int __init pnv_rng_late_init(void)
+{
+ unsigned long v;
+ /* In case it wasn't called during init for some other reason. */
+ if (ppc_md.get_random_seed == pnv_get_random_long_early)
+ pnv_get_random_long_early(&v);
return 0;
}
-machine_subsys_initcall(powernv, rng_init);
+machine_subsys_initcall(powernv, pnv_rng_late_init);
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -190,6 +190,8 @@ static void __init pnv_setup_arch(void)
pnv_check_guarded_cores();
/* XXX PMCS */
+
+ pnv_rng_init();
}
static void __init pnv_init(void)
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 120/135] drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (118 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 119/135] powerpc/powernv: wire up rng during setup_arch Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 121/135] ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node Greg Kroah-Hartman
` (22 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kuogee Hsieh, Stephen Boyd, Abhinav Kumar
From: Kuogee Hsieh <quic_khsieh@quicinc.com>
commit 993a2adc6e2e94a0a7b5bfc054eda90ac95f62c3 upstream.
dp_catalog_ctrl_reset() will software reset DP controller. But it will
not reset programmable registers to default value. DP driver still have
to clear mask bits to interrupt status registers to disable interrupts
after software reset of controller.
At current implementation, dp_ctrl_reset_irq_ctrl() will software reset dp
controller but did not call dp_catalog_ctrl_enable_irq(false) to clear hpd
related interrupt mask bits to disable hpd related interrupts due to it
mistakenly think hpd related interrupt mask bits will be cleared by software
reset of dp controller automatically. This mistake may cause system to crash
during suspending procedure due to unexpected irq fired and trigger event
thread to access dp controller registers with controller clocks are disabled.
This patch fixes system crash during suspending problem by removing "enable"
flag condition checking at dp_ctrl_reset_irq_ctrl() so that hpd related
interrupt mask bits are cleared to prevent unexpected from happening.
Changes in v2:
-- add more details commit text
Changes in v3:
-- add synchrons_irq()
-- add atomic_t suspended
Changes in v4:
-- correct Fixes's commit ID
-- remove synchrons_irq()
Changes in v5:
-- revise commit text
Changes in v6:
-- add event_lock to protect "suspended"
Changes in v7:
-- delete "suspended" flag
Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/486591/
Link: https://lore.kernel.org/r/1652804494-19650-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/msm/dp/dp_ctrl.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1356,8 +1356,13 @@ void dp_ctrl_reset_irq_ctrl(struct dp_ct
dp_catalog_ctrl_reset(ctrl->catalog);
- if (enable)
- dp_catalog_ctrl_enable_irq(ctrl->catalog, enable);
+ /*
+ * all dp controller programmable registers will not
+ * be reset to default value after DP_SW_RESET
+ * therefore interrupt mask bits have to be updated
+ * to enable/disable interrupts
+ */
+ dp_catalog_ctrl_enable_irq(ctrl->catalog, enable);
}
void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl)
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 121/135] ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (119 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 120/135] drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl() Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 122/135] ARM: dts: imx6qdl: correct PU regulator ramp delay Greg Kroah-Hartman
` (21 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jun Li, Alexander Stein,
Fabio Estevam, Shawn Guo
From: Alexander Stein <alexander.stein@ew.tq-group.com>
commit 552ca27929ab28b341ae9b2629f0de3a84c98ee8 upstream.
Move the power domain to its actual user. This keeps the power domain
enabled even when the USB host is runtime suspended. This is necessary
to detect any downstream events, like device attach.
Fixes: 02f8eb40ef7b ("ARM: dts: imx7s: Add power domain for imx7d HSIC")
Suggested-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/imx7s.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -104,6 +104,7 @@
compatible = "usb-nop-xceiv";
clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
clock-names = "main_clk";
+ power-domains = <&pgc_hsic_phy>;
#phy-cells = <0>;
};
@@ -1135,7 +1136,6 @@
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b30000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&pgc_hsic_phy>;
clocks = <&clks IMX7D_USB_CTRL_CLK>;
fsl,usbphy = <&usbphynop3>;
fsl,usbmisc = <&usbmisc3 0>;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 122/135] ARM: dts: imx6qdl: correct PU regulator ramp delay
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (120 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 121/135] ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 123/135] arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode Greg Kroah-Hartman
` (20 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Lucas Stach, Shawn Guo
From: Lucas Stach <l.stach@pengutronix.de>
commit 93a8ba2a619816d631bd69e9ce2172b4d7a481b8 upstream.
Contrary to what was believed at the time, the ramp delay of 150us is not
plenty for the PU LDO with the default step time of 512 pulses of the 24MHz
clock. Measurements have shown that after enabling the LDO the voltage on
VDDPU_CAP jumps to ~750mV in the first step and after that the regulator
executes the normal ramp up as defined by the step size control.
This means it takes the regulator between 360us and 370us to ramp up to
the nominal 1.15V voltage for this power domain. With the old setting of
the ramp delay the power up of the PU GPC domain would happen in the middle
of the regulator ramp with the voltage being at around 900mV. Apparently
this was enough for most units to properly power up the peripherals in the
domain and execute the reset. Some units however, fail to power up properly,
especially when the chip is at a low temperature. In that case any access
to the GPU registers would yield an incorrect result with no way to recover
from this situation.
Change the ramp delay to 380us to cover the measured ramp up time with a
bit of additional slack.
Fixes: 40130d327f72 ("ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/imx6qdl.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -763,7 +763,7 @@
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
- regulator-enable-ramp-delay = <150>;
+ regulator-enable-ramp-delay = <380>;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 123/135] arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (121 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 122/135] ARM: dts: imx6qdl: correct PU regulator ramp delay Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 124/135] ARM: exynos: Fix refcount leak in exynos_map_pmu Greg Kroah-Hartman
` (19 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aswath Govindraju, Nishanth Menon
From: Aswath Govindraju <a-govindraju@ti.com>
commit 0c0af88f3f318e73237f7fadd02d0bf2b6c996bb upstream.
AM64 SoC, does not support HS400 and HS200 is the maximum supported speed
mode[1]. Therefore, fix the device tree node to reflect the same.
[1] - https://www.ti.com/lit/ds/symlink/am6442.pdf
(SPRSP56C – JANUARY 2021 – REVISED FEBRUARY 2022)
Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220512064859.32059-1-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 --
1 file changed, 2 deletions(-)
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -456,13 +456,11 @@
clock-names = "clk_ahb", "clk_xin";
mmc-ddr-1_8v;
mmc-hs200-1_8v;
- mmc-hs400-1_8v;
ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-ddr52 = <0x6>;
ti,otap-del-sel-hs200 = <0x7>;
- ti,otap-del-sel-hs400 = <0x4>;
};
sdhci1: mmc@fa00000 {
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 124/135] ARM: exynos: Fix refcount leak in exynos_map_pmu
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (122 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 123/135] arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 125/135] soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe Greg Kroah-Hartman
` (18 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Krzysztof Kozlowski
From: Miaoqian Lin <linmq006@gmail.com>
commit c4c79525042a4a7df96b73477feaf232fe44ae81 upstream.
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() checks null pointer.
Fixes: fce9e5bb2526 ("ARM: EXYNOS: Add support for mapping PMU base address via DT")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220523145513.12341-1-linmq006@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/mach-exynos/exynos.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -149,6 +149,7 @@ static void exynos_map_pmu(void)
np = of_find_matching_node(NULL, exynos_dt_pmu_match);
if (np)
pmu_base_addr = of_iomap(np, 0);
+ of_node_put(np);
}
static void __init exynos_init_irq(void)
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 125/135] soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (123 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 124/135] ARM: exynos: Fix refcount leak in exynos_map_pmu Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 126/135] ARM: Fix refcount leak in axxia_boot_secondary Greg Kroah-Hartman
` (17 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Andy Shevchenko,
Florian Fainelli
From: Miaoqian Lin <linmq006@gmail.com>
commit 37d838de369b07b596c19ff3662bf0293fdb09ee upstream.
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
In brcmstb_init_sram, it pass dn to of_address_to_resource(),
of_address_to_resource() will call of_find_device_by_node() to take
reference, so we should release the reference returned by
of_find_matching_node().
Fixes: 0b741b8234c8 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/soc/bcm/brcmstb/pm/pm-arm.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/soc/bcm/brcmstb/pm/pm-arm.c
+++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
@@ -783,6 +783,7 @@ static int brcmstb_pm_probe(struct platf
}
ret = brcmstb_init_sram(dn);
+ of_node_put(dn);
if (ret) {
pr_err("error setting up SRAM for PM\n");
return ret;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 126/135] ARM: Fix refcount leak in axxia_boot_secondary
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (124 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 125/135] soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 127/135] memory: samsung: exynos5422-dmc: Fix refcount leak in of_get_dram_timings Greg Kroah-Hartman
` (16 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Arnd Bergmann
From: Miaoqian Lin <linmq006@gmail.com>
commit 7c7ff68daa93d8c4cdea482da4f2429c0398fcde upstream.
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 1d22924e1c4e ("ARM: Add platform support for LSI AXM55xx SoC")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220601090548.47616-1-linmq006@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/mach-axxia/platsmp.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/mach-axxia/platsmp.c
+++ b/arch/arm/mach-axxia/platsmp.c
@@ -39,6 +39,7 @@ static int axxia_boot_secondary(unsigned
return -ENOENT;
syscon = of_iomap(syscon_np, 0);
+ of_node_put(syscon_np);
if (!syscon)
return -ENOMEM;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 127/135] memory: samsung: exynos5422-dmc: Fix refcount leak in of_get_dram_timings
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (125 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 126/135] ARM: Fix refcount leak in axxia_boot_secondary Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 128/135] ARM: cns3xxx: Fix refcount leak in cns3xxx_init Greg Kroah-Hartman
` (15 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Lukasz Luba,
Krzysztof Kozlowski
From: Miaoqian Lin <linmq006@gmail.com>
commit 1332661e09304b7b8e84e5edc11811ba08d12abe upstream.
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
This function doesn't call of_node_put() in some error paths.
To unify the structure, Add put_node label and goto it on errors.
Fixes: 6e7674c3c6df ("memory: Add DMC driver for Exynos5422")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220602041721.64348-1-linmq006@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/memory/samsung/exynos5422-dmc.c | 29 ++++++++++++++++++-----------
1 file changed, 18 insertions(+), 11 deletions(-)
--- a/drivers/memory/samsung/exynos5422-dmc.c
+++ b/drivers/memory/samsung/exynos5422-dmc.c
@@ -1187,33 +1187,39 @@ static int of_get_dram_timings(struct ex
dmc->timing_row = devm_kmalloc_array(dmc->dev, TIMING_COUNT,
sizeof(u32), GFP_KERNEL);
- if (!dmc->timing_row)
- return -ENOMEM;
+ if (!dmc->timing_row) {
+ ret = -ENOMEM;
+ goto put_node;
+ }
dmc->timing_data = devm_kmalloc_array(dmc->dev, TIMING_COUNT,
sizeof(u32), GFP_KERNEL);
- if (!dmc->timing_data)
- return -ENOMEM;
+ if (!dmc->timing_data) {
+ ret = -ENOMEM;
+ goto put_node;
+ }
dmc->timing_power = devm_kmalloc_array(dmc->dev, TIMING_COUNT,
sizeof(u32), GFP_KERNEL);
- if (!dmc->timing_power)
- return -ENOMEM;
+ if (!dmc->timing_power) {
+ ret = -ENOMEM;
+ goto put_node;
+ }
dmc->timings = of_lpddr3_get_ddr_timings(np_ddr, dmc->dev,
DDR_TYPE_LPDDR3,
&dmc->timings_arr_size);
if (!dmc->timings) {
- of_node_put(np_ddr);
dev_warn(dmc->dev, "could not get timings from DT\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto put_node;
}
dmc->min_tck = of_lpddr3_get_min_tck(np_ddr, dmc->dev);
if (!dmc->min_tck) {
- of_node_put(np_ddr);
dev_warn(dmc->dev, "could not get tck from DT\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto put_node;
}
/* Sorted array of OPPs with frequency ascending */
@@ -1227,13 +1233,14 @@ static int of_get_dram_timings(struct ex
clk_period_ps);
}
- of_node_put(np_ddr);
/* Take the highest frequency's timings as 'bypass' */
dmc->bypass_timing_row = dmc->timing_row[idx - 1];
dmc->bypass_timing_data = dmc->timing_data[idx - 1];
dmc->bypass_timing_power = dmc->timing_power[idx - 1];
+put_node:
+ of_node_put(np_ddr);
return ret;
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 128/135] ARM: cns3xxx: Fix refcount leak in cns3xxx_init
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (126 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 127/135] memory: samsung: exynos5422-dmc: Fix refcount leak in of_get_dram_timings Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 129/135] modpost: fix section mismatch check for exported init/exit sections Greg Kroah-Hartman
` (14 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Krzysztof Halasa,
Arnd Bergmann
From: Miaoqian Lin <linmq006@gmail.com>
commit 1ba904b6b16e08de5aed7c1349838d9cd0d178c5 upstream.
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 415f59142d9d ("ARM: cns3xxx: initial DT support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/mach-cns3xxx/core.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -372,6 +372,7 @@ static void __init cns3xxx_init(void)
/* De-Asscer SATA Reset */
cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
}
+ of_node_put(dn);
dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
if (of_device_is_available(dn)) {
@@ -385,6 +386,7 @@ static void __init cns3xxx_init(void)
cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
}
+ of_node_put(dn);
pm_power_off = cns3xxx_power_off;
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 129/135] modpost: fix section mismatch check for exported init/exit sections
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (127 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 128/135] ARM: cns3xxx: Fix refcount leak in cns3xxx_init Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 130/135] ARM: dts: bcm2711-rpi-400: Fix GPIO line names Greg Kroah-Hartman
` (13 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Masahiro Yamada, Nick Desaulniers
From: Masahiro Yamada <masahiroy@kernel.org>
commit 28438794aba47a27e922857d27b31b74e8559143 upstream.
Since commit f02e8a6596b7 ("module: Sort exported symbols"),
EXPORT_SYMBOL* is placed in the individual section ___ksymtab(_gpl)+<sym>
(3 leading underscores instead of 2).
Since then, modpost cannot detect the bad combination of EXPORT_SYMBOL
and __init/__exit.
Fix the .fromsec field.
Fixes: f02e8a6596b7 ("module: Sort exported symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
scripts/mod/modpost.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1108,7 +1108,7 @@ static const struct sectioncheck section
},
/* Do not export init/exit functions or data */
{
- .fromsec = { "__ksymtab*", NULL },
+ .fromsec = { "___ksymtab*", NULL },
.bad_tosec = { INIT_SECTIONS, EXIT_SECTIONS, NULL },
.mismatch = EXPORT_TO_INIT_EXIT,
.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 130/135] ARM: dts: bcm2711-rpi-400: Fix GPIO line names
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (128 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 129/135] modpost: fix section mismatch check for exported init/exit sections Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 131/135] random: update comment from copy_to_user() -> copy_to_iter() Greg Kroah-Hartman
` (12 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ivan T. Ivanov, Stefan Wahren,
Florian Fainelli
From: Stefan Wahren <stefan.wahren@i2se.com>
commit b9b6d4c925604b70d007feb4c77b8cc4c038d2da upstream.
The GPIO expander line names has been fixed in the vendor tree last year,
so upstream these changes.
Fixes: 1c701accecf2 ("ARM: dts: Add Raspberry Pi 400 support")
Reported-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/bcm2711-rpi-400.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -28,12 +28,12 @@
&expgpio {
gpio-line-names = "BT_ON",
"WL_ON",
- "",
+ "PWR_LED_OFF",
"GLOBAL_RESET",
"VDD_SD_IO_SEL",
- "CAM_GPIO",
+ "GLOBAL_SHUTDOWN",
"SD_PWR_ON",
- "SD_OC_N";
+ "SHUTDOWN_REQUEST";
};
&genet_mdio {
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 131/135] random: update comment from copy_to_user() -> copy_to_iter()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (129 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 130/135] ARM: dts: bcm2711-rpi-400: Fix GPIO line names Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 132/135] perf build-id: Fix caching files with a wrong build ID Greg Kroah-Hartman
` (11 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jason A. Donenfeld
From: Jason A. Donenfeld <Jason@zx2c4.com>
commit 63b8ea5e4f1a87dea4d3114293fc8e96a8f193d7 upstream.
This comment wasn't updated when we moved from read() to read_iter(), so
this patch makes the trivial fix.
Fixes: 1b388e7765f2 ("random: convert to using fops->read_iter()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/char/random.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -452,7 +452,7 @@ static ssize_t get_random_bytes_user(str
/*
* Immediately overwrite the ChaCha key at index 4 with random
- * bytes, in case userspace causes copy_to_user() below to sleep
+ * bytes, in case userspace causes copy_to_iter() below to sleep
* forever, so that we still retain forward secrecy in that case.
*/
crng_make_state(chacha_state, (u8 *)&chacha_state[4], CHACHA_KEY_SIZE);
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 132/135] perf build-id: Fix caching files with a wrong build ID
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (130 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 131/135] random: update comment from copy_to_user() -> copy_to_iter() Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 133/135] dma-direct: use the correct size for dma_set_encrypted() Greg Kroah-Hartman
` (10 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Adrian Hunter, Jiri Olsa,
Namhyung Kim, Tom Zanussi, Arnaldo Carvalho de Melo
From: Adrian Hunter <adrian.hunter@intel.com>
commit ab66fdace8581ef3b4e7cf5381a168ed4058d779 upstream.
Build ID events associate a file name with a build ID. However, when
using perf inject, there is no guarantee that the file on the current
machine at the current time has that build ID. Fix by comparing the
build IDs and skip adding to the cache if they are different.
Example:
$ echo "int main() {return 0;}" > prog.c
$ gcc -o prog prog.c
$ perf record --buildid-all ./prog
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data ]
$ file-buildid() { file $1 | awk -F= '{print $2}' | awk -F, '{print $1}' ; }
$ file-buildid prog
444ad9be165d8058a48ce2ffb4e9f55854a3293e
$ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
444ad9be165d8058a48ce2ffb4e9f55854a3293e
$ echo "int main() {return 1;}" > prog.c
$ gcc -o prog prog.c
$ file-buildid prog
885524d5aaa24008a3e2b06caa3ea95d013c0fc5
Before:
$ perf buildid-cache --purge $(pwd)/prog
$ perf inject -i perf.data -o junk
$ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
885524d5aaa24008a3e2b06caa3ea95d013c0fc5
$
After:
$ perf buildid-cache --purge $(pwd)/prog
$ perf inject -i perf.data -o junk
$ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
$
Fixes: 454c407ec17a0c63 ("perf: add perf-inject builtin")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: https://lore.kernel.org/r/20220621125144.5623-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/perf/util/build-id.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
--- a/tools/perf/util/build-id.c
+++ b/tools/perf/util/build-id.c
@@ -872,6 +872,30 @@ out_free:
return err;
}
+static int filename__read_build_id_ns(const char *filename,
+ struct build_id *bid,
+ struct nsinfo *nsi)
+{
+ struct nscookie nsc;
+ int ret;
+
+ nsinfo__mountns_enter(nsi, &nsc);
+ ret = filename__read_build_id(filename, bid);
+ nsinfo__mountns_exit(&nsc);
+
+ return ret;
+}
+
+static bool dso__build_id_mismatch(struct dso *dso, const char *name)
+{
+ struct build_id bid;
+
+ if (filename__read_build_id_ns(name, &bid, dso->nsinfo) < 0)
+ return false;
+
+ return !dso__build_id_equal(dso, &bid);
+}
+
static int dso__cache_build_id(struct dso *dso, struct machine *machine,
void *priv __maybe_unused)
{
@@ -886,6 +910,10 @@ static int dso__cache_build_id(struct ds
is_kallsyms = true;
name = machine->mmap_name;
}
+
+ if (!is_kallsyms && dso__build_id_mismatch(dso, name))
+ return 0;
+
return build_id_cache__add_b(&dso->bid, name, dso->nsinfo,
is_kallsyms, is_vdso);
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 133/135] dma-direct: use the correct size for dma_set_encrypted()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (131 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 132/135] perf build-id: Fix caching files with a wrong build ID Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 134/135] kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt) Greg Kroah-Hartman
` (9 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dexuan Cui, Robin Murphy, Christoph Hellwig
From: Dexuan Cui <decui@microsoft.com>
commit 3be4562584bba603f33863a00c1c32eecf772ee6 upstream.
The third parameter of dma_set_encrypted() is a size in bytes rather than
the number of pages.
Fixes: 4d0564785bb0 ("dma-direct: factor out dma_set_{de,en}crypted helpers")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/dma/direct.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -323,7 +323,7 @@ void dma_direct_free(struct device *dev,
} else {
if (IS_ENABLED(CONFIG_ARCH_HAS_DMA_CLEAR_UNCACHED))
arch_dma_clear_uncached(cpu_addr, size);
- if (dma_set_encrypted(dev, cpu_addr, 1 << page_order))
+ if (dma_set_encrypted(dev, cpu_addr, size))
return;
}
@@ -360,7 +360,6 @@ void dma_direct_free_pages(struct device
struct page *page, dma_addr_t dma_addr,
enum dma_data_direction dir)
{
- unsigned int page_order = get_order(size);
void *vaddr = page_address(page);
/* If cpu_addr is not from an atomic pool, dma_free_from_pool() fails */
@@ -368,7 +367,7 @@ void dma_direct_free_pages(struct device
dma_free_from_pool(dev, vaddr, size))
return;
- if (dma_set_encrypted(dev, vaddr, 1 << page_order))
+ if (dma_set_encrypted(dev, vaddr, size))
return;
__dma_direct_free_pages(dev, page, size);
}
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 134/135] kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (132 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 133/135] dma-direct: use the correct size for dma_set_encrypted() Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 11:22 ` [PATCH 5.15 135/135] powerpc/pseries: wire up rng during setup_arch() Greg Kroah-Hartman
` (8 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Masahiro Yamada, Sami Tolvanen,
Nick Desaulniers
From: Masahiro Yamada <masahiroy@kernel.org>
commit 53632ba87d9f302a8d97a11ec2f4f4eec7bb75ea upstream.
If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from
a pristine state, the vmlinux is linked twice.
Commit 3fdc7d3fe4c0 ("kbuild: link vmlinux only once for
CONFIG_TRIM_UNUSED_KSYMS") explains why this happens, but it did not fix
the issue at all.
Now I realized I had applied a wrong patch.
In v1 patch [1], the autoksyms_recursive target correctly recurses to
"$(MAKE) -f $(srctree)/Makefile autoksyms_recursive".
In v2 patch [2], I accidentally dropped the diff line, and it recurses to
"$(MAKE) -f $(srctree)/Makefile vmlinux".
Restore the code I intended in v1.
[1]: https://lore.kernel.org/linux-kbuild/1521045861-22418-8-git-send-email-yamada.masahiro@socionext.com/
[2]: https://lore.kernel.org/linux-kbuild/1521166725-24157-8-git-send-email-yamada.masahiro@socionext.com/
Fixes: 3fdc7d3fe4c0 ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Makefile
+++ b/Makefile
@@ -1163,7 +1163,7 @@ KBUILD_MODULES := 1
autoksyms_recursive: descend modules.order
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
- "$(MAKE) -f $(srctree)/Makefile vmlinux"
+ "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive"
endif
autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h)
^ permalink raw reply [flat|nested] 147+ messages in thread* [PATCH 5.15 135/135] powerpc/pseries: wire up rng during setup_arch()
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (133 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 134/135] kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt) Greg Kroah-Hartman
@ 2022-06-27 11:22 ` Greg Kroah-Hartman
2022-06-27 14:44 ` [PATCH 5.15 000/135] 5.15.51-rc1 review Jon Hunter
` (7 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-27 11:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason A. Donenfeld, Christophe Leroy,
Michael Ellerman
From: Jason A. Donenfeld <Jason@zx2c4.com>
commit e561e472a3d441753bd012333b057f48fef1045b upstream.
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/platforms/pseries/pseries.h | 2 ++
arch/powerpc/platforms/pseries/rng.c | 11 +++--------
arch/powerpc/platforms/pseries/setup.c | 2 ++
3 files changed, 7 insertions(+), 8 deletions(-)
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -115,4 +115,6 @@ extern u32 pseries_security_flavor;
void pseries_setup_security_mitigations(void);
void pseries_lpar_read_hblkrm_characteristics(void);
+void pseries_rng_init(void);
+
#endif /* _PSERIES_PSERIES_H */
--- a/arch/powerpc/platforms/pseries/rng.c
+++ b/arch/powerpc/platforms/pseries/rng.c
@@ -10,6 +10,7 @@
#include <asm/archrandom.h>
#include <asm/machdep.h>
#include <asm/plpar_wrappers.h>
+#include "pseries.h"
static int pseries_get_random_long(unsigned long *v)
@@ -24,19 +25,13 @@ static int pseries_get_random_long(unsig
return 0;
}
-static __init int rng_init(void)
+void __init pseries_rng_init(void)
{
struct device_node *dn;
dn = of_find_compatible_node(NULL, NULL, "ibm,random");
if (!dn)
- return -ENODEV;
-
- pr_info("Registering arch random hook.\n");
-
+ return;
ppc_md.get_random_seed = pseries_get_random_long;
-
of_node_put(dn);
- return 0;
}
-machine_subsys_initcall(pseries, rng_init);
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -840,6 +840,8 @@ static void __init pSeries_setup_arch(vo
if (swiotlb_force == SWIOTLB_FORCE)
ppc_swiotlb_enable = 1;
+
+ pseries_rng_init();
}
static void pseries_panic(char *str)
^ permalink raw reply [flat|nested] 147+ messages in thread* Re: [PATCH 5.15 000/135] 5.15.51-rc1 review
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (134 preceding siblings ...)
2022-06-27 11:22 ` [PATCH 5.15 135/135] powerpc/pseries: wire up rng during setup_arch() Greg Kroah-Hartman
@ 2022-06-27 14:44 ` Jon Hunter
2022-06-27 17:19 ` Florian Fainelli
` (6 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Jon Hunter @ 2022-06-27 14:44 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Greg Kroah-Hartman, stable, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, slade, linux-tegra
On Mon, 27 Jun 2022 13:20:07 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.51 release.
> There are 135 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 29 Jun 2022 11:19:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.51-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v5.15:
10 builds: 10 pass, 0 fail
28 boots: 28 pass, 0 fail
114 tests: 114 pass, 0 fail
Linux version: 5.15.51-rc1-g2c21dc5c2cb6
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Jon
^ permalink raw reply [flat|nested] 147+ messages in thread* Re: [PATCH 5.15 000/135] 5.15.51-rc1 review
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (135 preceding siblings ...)
2022-06-27 14:44 ` [PATCH 5.15 000/135] 5.15.51-rc1 review Jon Hunter
@ 2022-06-27 17:19 ` Florian Fainelli
2022-06-27 18:38 ` Daniel Díaz
` (5 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Florian Fainelli @ 2022-06-27 17:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, sudipm.mukherjee, slade
On 6/27/22 04:20, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.51 release.
> There are 135 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 29 Jun 2022 11:19:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.51-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian
^ permalink raw reply [flat|nested] 147+ messages in thread* Re: [PATCH 5.15 000/135] 5.15.51-rc1 review
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (136 preceding siblings ...)
2022-06-27 17:19 ` Florian Fainelli
@ 2022-06-27 18:38 ` Daniel Díaz
2022-06-28 1:58 ` Guenter Roeck
2022-06-27 21:51 ` Shuah Khan
` (4 subsequent siblings)
142 siblings, 1 reply; 147+ messages in thread
From: Daniel Díaz @ 2022-06-27 18:38 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, sudipm.mukherjee, slade
Hello!
On 27/06/22 06:20, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.51 release.
> There are 135 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 29 Jun 2022 11:19:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.51-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro's test farm.
The following new warnings have been found while building ixp4xx_defconfig for Arm combinations with GCC:
WARNING: modpost: vmlinux.o(___ksymtab_gpl+ixp4xx_irq_init+0x0): Section mismatch in reference from the variable __ksymtab_ixp4xx_irq_init to the function .init.text:ixp4xx_irq_init()
The symbol ixp4xx_irq_init is exported and annotated __init
Fix this by removing the __init annotation of ixp4xx_irq_init or drop the export.
WARNING: modpost: vmlinux.o(___ksymtab_gpl+ixp4xx_timer_setup+0x0): Section mismatch in reference from the variable __ksymtab_ixp4xx_timer_setup to the function .init.text:ixp4xx_timer_setup()
The symbol ixp4xx_timer_setup is exported and annotated __init
Fix this by removing the __init annotation of ixp4xx_timer_setup or drop the export.
## Build
* kernel: 5.15.51-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.15.y
* git commit: 2c21dc5c2cb635c1b549c0f3eb0ff3d3744be11a
* git describe: v5.15.50-136-g2c21dc5c2cb6
* test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.50-136-g2c21dc5c2cb6
## No test regressions (compared to v5.15.48-116-g18a33c8dabb8)
## Metric Regressions (compared to v5.15.48-116-g18a33c8dabb8)
* arm, build
- gcc-8-ixp4xx_defconfig-warnings
- gcc-9-ixp4xx_defconfig-warnings
- gcc-10-ixp4xx_defconfig-warnings
- gcc-11-ixp4xx_defconfig-warnings
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
## No test fixes (compared to v5.15.48-116-g18a33c8dabb8)
## No metric fixes (compared to v5.15.48-116-g18a33c8dabb8)
## Test result summary
total: 122583, pass: 109673, fail: 286, skip: 12014, xfail: 610
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 314 total, 314 passed, 0 failed
* arm64: 58 total, 58 passed, 0 failed
* i386: 52 total, 49 passed, 3 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 54 total, 54 passed, 0 failed
* riscv: 22 total, 22 passed, 0 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 56 total, 55 passed, 1 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
* vdso
Greetings!
Daniel Díaz
daniel.diaz@linaro.org
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 147+ messages in thread* Re: [PATCH 5.15 000/135] 5.15.51-rc1 review
2022-06-27 18:38 ` Daniel Díaz
@ 2022-06-28 1:58 ` Guenter Roeck
0 siblings, 0 replies; 147+ messages in thread
From: Guenter Roeck @ 2022-06-28 1:58 UTC (permalink / raw)
To: Daniel Díaz, Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, sudipm.mukherjee, slade
On 6/27/22 11:38, Daniel Díaz wrote:
> Hello!
>
> On 27/06/22 06:20, Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 5.15.51 release.
>> There are 135 patches in this series, all will be posted as a response
>> to this one. If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Wed, 29 Jun 2022 11:19:09 +0000.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.51-rc1.gz
>> or in the git tree and branch at:
>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
>> and the diffstat can be found below.
>>
>> thanks,
>>
>> greg k-h
>
> Results from Linaro's test farm.
> The following new warnings have been found while building ixp4xx_defconfig for Arm combinations with GCC:
>
> WARNING: modpost: vmlinux.o(___ksymtab_gpl+ixp4xx_irq_init+0x0): Section mismatch in reference from the variable __ksymtab_ixp4xx_irq_init to the function .init.text:ixp4xx_irq_init()
> The symbol ixp4xx_irq_init is exported and annotated __init
> Fix this by removing the __init annotation of ixp4xx_irq_init or drop the export.
>
> WARNING: modpost: vmlinux.o(___ksymtab_gpl+ixp4xx_timer_setup+0x0): Section mismatch in reference from the variable __ksymtab_ixp4xx_timer_setup to the function .init.text:ixp4xx_timer_setup()
> The symbol ixp4xx_timer_setup is exported and annotated __init
> Fix this by removing the __init annotation of ixp4xx_timer_setup or drop the export.
>
This is a side effect of commit 03c1120b3d9c ("modpost: fix section mismatch check
for exported init/exit sections") which exposes the above problems.
Guenter
^ permalink raw reply [flat|nested] 147+ messages in thread
* Re: [PATCH 5.15 000/135] 5.15.51-rc1 review
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (137 preceding siblings ...)
2022-06-27 18:38 ` Daniel Díaz
@ 2022-06-27 21:51 ` Shuah Khan
2022-06-27 23:42 ` Guenter Roeck
` (3 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Shuah Khan @ 2022-06-27 21:51 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, sudipm.mukherjee, slade,
Shuah Khan
On 6/27/22 5:20 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.51 release.
> There are 135 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 29 Jun 2022 11:19:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.51-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 147+ messages in thread* Re: [PATCH 5.15 000/135] 5.15.51-rc1 review
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (138 preceding siblings ...)
2022-06-27 21:51 ` Shuah Khan
@ 2022-06-27 23:42 ` Guenter Roeck
2022-06-28 3:38 ` Bagas Sanjaya
` (2 subsequent siblings)
142 siblings, 0 replies; 147+ messages in thread
From: Guenter Roeck @ 2022-06-27 23:42 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee,
slade
On Mon, Jun 27, 2022 at 01:20:07PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.51 release.
> There are 135 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 29 Jun 2022 11:19:09 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 159 pass: 159 fail: 0
Qemu test results:
total: 488 pass: 488 fail: 0
Tested-by: Guenter Roeck <linux@roeck-us.net>
Guenter
^ permalink raw reply [flat|nested] 147+ messages in thread* Re: [PATCH 5.15 000/135] 5.15.51-rc1 review
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (139 preceding siblings ...)
2022-06-27 23:42 ` Guenter Roeck
@ 2022-06-28 3:38 ` Bagas Sanjaya
2022-06-29 10:52 ` Greg Kroah-Hartman
2022-06-28 7:25 ` Ron Economos
2022-06-28 13:21 ` Sudip Mukherjee
142 siblings, 1 reply; 147+ messages in thread
From: Bagas Sanjaya @ 2022-06-28 3:38 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee,
slade, Larry Finger, Phillip Potter, linux-staging
On Mon, Jun 27, 2022 at 01:20:07PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.51 release.
> There are 135 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
Successfully cross-compiled for arm (multi_v7_defconfig, GCC 12.1.0,
armv7 with neon FPU) and arm64 (bcm2711_defconfig, GCC 12.1.0).
But I see a warning on arm64 build:
CC [M] drivers/staging/r8188eu/core/rtw_br_ext.o
CC [M] net/batman-adv/tvlv.o
In function '__nat25_add_pppoe_tag',
inlined from 'nat25_db_handle' at drivers/staging/r8188eu/core/rtw_br_ext.c:520:11:
drivers/staging/r8188eu/core/rtw_br_ext.c:83:9: warning: 'memcpy' reading between 2052 and 9220 bytes from a region of size 40 [-Wstringop-overread]
83 | memcpy((unsigned char *)ph->tag, tag, data_len);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/r8188eu/core/rtw_br_ext.c: In function 'nat25_db_handle':
drivers/staging/r8188eu/core/rtw_br_ext.c:489:63: note: source object 'tag_buf' of size 40
489 | unsigned char tag_buf[40];
| ^~~~~~~
Introduced by commit 15865124feed88 ("staging: r8188eu: introduce new core dir
for RTL8188eu driver").
Anyway,
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
--
An old man doll... just what I always wanted! - Clara
^ permalink raw reply [flat|nested] 147+ messages in thread* Re: [PATCH 5.15 000/135] 5.15.51-rc1 review
2022-06-28 3:38 ` Bagas Sanjaya
@ 2022-06-29 10:52 ` Greg Kroah-Hartman
0 siblings, 0 replies; 147+ messages in thread
From: Greg Kroah-Hartman @ 2022-06-29 10:52 UTC (permalink / raw)
To: Bagas Sanjaya
Cc: linux-kernel, stable, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee,
slade, Larry Finger, Phillip Potter, linux-staging
On Tue, Jun 28, 2022 at 10:38:19AM +0700, Bagas Sanjaya wrote:
> On Mon, Jun 27, 2022 at 01:20:07PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.15.51 release.
> > There are 135 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
>
> Successfully cross-compiled for arm (multi_v7_defconfig, GCC 12.1.0,
> armv7 with neon FPU) and arm64 (bcm2711_defconfig, GCC 12.1.0).
>
> But I see a warning on arm64 build:
>
> CC [M] drivers/staging/r8188eu/core/rtw_br_ext.o
> CC [M] net/batman-adv/tvlv.o
> In function '__nat25_add_pppoe_tag',
> inlined from 'nat25_db_handle' at drivers/staging/r8188eu/core/rtw_br_ext.c:520:11:
> drivers/staging/r8188eu/core/rtw_br_ext.c:83:9: warning: 'memcpy' reading between 2052 and 9220 bytes from a region of size 40 [-Wstringop-overread]
> 83 | memcpy((unsigned char *)ph->tag, tag, data_len);
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/staging/r8188eu/core/rtw_br_ext.c: In function 'nat25_db_handle':
> drivers/staging/r8188eu/core/rtw_br_ext.c:489:63: note: source object 'tag_buf' of size 40
> 489 | unsigned char tag_buf[40];
> | ^~~~~~~
>
> Introduced by commit 15865124feed88 ("staging: r8188eu: introduce new core dir
> for RTL8188eu driver").
That is due to gcc-12 stuff.
thanks for testing.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 147+ messages in thread
* Re: [PATCH 5.15 000/135] 5.15.51-rc1 review
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (140 preceding siblings ...)
2022-06-28 3:38 ` Bagas Sanjaya
@ 2022-06-28 7:25 ` Ron Economos
2022-06-28 13:21 ` Sudip Mukherjee
142 siblings, 0 replies; 147+ messages in thread
From: Ron Economos @ 2022-06-28 7:25 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, sudipm.mukherjee, slade
On 6/27/22 4:20 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.51 release.
> There are 135 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 29 Jun 2022 11:19:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.51-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos <re@w6rz.net>
^ permalink raw reply [flat|nested] 147+ messages in thread* Re: [PATCH 5.15 000/135] 5.15.51-rc1 review
2022-06-27 11:20 [PATCH 5.15 000/135] 5.15.51-rc1 review Greg Kroah-Hartman
` (141 preceding siblings ...)
2022-06-28 7:25 ` Ron Economos
@ 2022-06-28 13:21 ` Sudip Mukherjee
142 siblings, 0 replies; 147+ messages in thread
From: Sudip Mukherjee @ 2022-06-28 13:21 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, slade
Hi Greg,
On Mon, Jun 27, 2022 at 01:20:07PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.51 release.
> There are 135 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 29 Jun 2022 11:19:09 +0000.
> Anything received after that time might be too late.
Build test (gcc version 11.3.1 20220627):
mips: 62 configs -> no failure
arm: 99 configs -> no failure
arm64: 3 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
csky allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
mips: Booted on ci20 board. No regression. [3]
[1]. https://openqa.qa.codethink.co.uk/tests/1403
[2]. https://openqa.qa.codethink.co.uk/tests/1408
[3]. https://openqa.qa.codethink.co.uk/tests/1410
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
--
Regards
Sudip
^ permalink raw reply [flat|nested] 147+ messages in thread