From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Konrad Dybcio <konrad.dybcio@somainline.org>, Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>, Abhinav Kumar <quic_abhinavk@quicinc.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Stephen Boyd <swboyd@chromium.org>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org Subject: [PATCH v2 11/11] dt-bindings: display/msm: move common DPU properties to dpu-common.yaml Date: Sun, 10 Jul 2022 12:00:40 +0300 [thread overview] Message-ID: <20220710090040.35193-12-dmitry.baryshkov@linaro.org> (raw) In-Reply-To: <20220710090040.35193-1-dmitry.baryshkov@linaro.org> Move properties common to all DPU DT nodes to the dpu-common.yaml. Note, this removes description of individual DPU port@ nodes. However such definitions add no additional value. The reg values do not correspond to hardware INTF indices. The driver discovers and binds these ports not paying any care for the order of these items. Thus just leave the reference to graph.yaml#/properties/ports and the description. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- .../bindings/display/msm/dpu-common.yaml | 42 ++++++++++++++++++ .../bindings/display/msm/dpu-msm8998.yaml | 43 ++----------------- .../bindings/display/msm/dpu-qcm2290.yaml | 39 ++--------------- .../bindings/display/msm/dpu-sc7180.yaml | 43 ++----------------- .../bindings/display/msm/dpu-sc7280.yaml | 43 ++----------------- .../bindings/display/msm/dpu-sdm845.yaml | 43 ++----------------- 6 files changed, 62 insertions(+), 191 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-common.yaml diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml new file mode 100644 index 000000000000..14eda883e149 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml @@ -0,0 +1,42 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties (common properties) + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> + - Rob Clark <robdclark@gmail.com> + +description: | + Common properties for QCom DPU display controller. + +properties: + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. + +required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml index 5caf46a1dd88..158bd93a157f 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -47,45 +47,10 @@ properties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF2 (DSI2) - - required: - - port@0 - - port@1 - -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml index 8027319b1aad..0364261bf3d2 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml @@ -43,41 +43,10 @@ properties: - const: lut - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - required: - - port@0 - -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml index 9d4ec0b60c25..5df1f2d987c9 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -45,45 +45,10 @@ properties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@2: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF0 (DP) - - required: - - port@0 - -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml index 349a454099ad..c822da588de0 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -44,45 +44,10 @@ properties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF5 (EDP) - - required: - - port@0 - -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index 42ff85e80f45..218c9d0f3fed 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -43,45 +43,10 @@ properties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF2 (DSI2) - - required: - - port@0 - - port@1 - -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | -- 2.35.1
WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Konrad Dybcio <konrad.dybcio@somainline.org>, Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>, Abhinav Kumar <quic_abhinavk@quicinc.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: devicetree@vger.kernel.org, David Airlie <airlied@linux.ie>, linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org, Stephen Boyd <swboyd@chromium.org>, freedreno@lists.freedesktop.org Subject: [PATCH v2 11/11] dt-bindings: display/msm: move common DPU properties to dpu-common.yaml Date: Sun, 10 Jul 2022 12:00:40 +0300 [thread overview] Message-ID: <20220710090040.35193-12-dmitry.baryshkov@linaro.org> (raw) In-Reply-To: <20220710090040.35193-1-dmitry.baryshkov@linaro.org> Move properties common to all DPU DT nodes to the dpu-common.yaml. Note, this removes description of individual DPU port@ nodes. However such definitions add no additional value. The reg values do not correspond to hardware INTF indices. The driver discovers and binds these ports not paying any care for the order of these items. Thus just leave the reference to graph.yaml#/properties/ports and the description. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- .../bindings/display/msm/dpu-common.yaml | 42 ++++++++++++++++++ .../bindings/display/msm/dpu-msm8998.yaml | 43 ++----------------- .../bindings/display/msm/dpu-qcm2290.yaml | 39 ++--------------- .../bindings/display/msm/dpu-sc7180.yaml | 43 ++----------------- .../bindings/display/msm/dpu-sc7280.yaml | 43 ++----------------- .../bindings/display/msm/dpu-sdm845.yaml | 43 ++----------------- 6 files changed, 62 insertions(+), 191 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-common.yaml diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml new file mode 100644 index 000000000000..14eda883e149 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml @@ -0,0 +1,42 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties (common properties) + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> + - Rob Clark <robdclark@gmail.com> + +description: | + Common properties for QCom DPU display controller. + +properties: + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. + +required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml index 5caf46a1dd88..158bd93a157f 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -47,45 +47,10 @@ properties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF2 (DSI2) - - required: - - port@0 - - port@1 - -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml index 8027319b1aad..0364261bf3d2 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml @@ -43,41 +43,10 @@ properties: - const: lut - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - required: - - port@0 - -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml index 9d4ec0b60c25..5df1f2d987c9 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -45,45 +45,10 @@ properties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@2: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF0 (DP) - - required: - - port@0 - -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml index 349a454099ad..c822da588de0 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -44,45 +44,10 @@ properties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF5 (EDP) - - required: - - port@0 - -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index 42ff85e80f45..218c9d0f3fed 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -43,45 +43,10 @@ properties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF2 (DSI2) - - required: - - port@0 - - port@1 - -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | -- 2.35.1
next prev parent reply other threads:[~2022-07-10 9:00 UTC|newest] Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-07-10 9:00 [PATCH v2 00/11] dt-bindings: display/msm: rework MDSS and DPU bindings Dmitry Baryshkov 2022-07-10 9:00 ` Dmitry Baryshkov 2022-07-10 9:00 ` [PATCH v2 01/11] arm64: dts: qcom: sdm845: rename DPU device node Dmitry Baryshkov 2022-07-10 9:00 ` Dmitry Baryshkov 2022-07-11 8:39 ` Konrad Dybcio 2022-07-11 8:39 ` Konrad Dybcio 2022-07-10 9:00 ` [PATCH v2 02/11] arm64: dts: qcom: sc7180: " Dmitry Baryshkov 2022-07-10 9:00 ` Dmitry Baryshkov 2022-07-11 8:39 ` Konrad Dybcio 2022-07-11 8:39 ` Konrad Dybcio 2022-07-10 9:00 ` [PATCH v2 03/11] arm64: dts: qcom: sm8250: " Dmitry Baryshkov 2022-07-10 9:00 ` Dmitry Baryshkov 2022-07-11 8:40 ` Konrad Dybcio 2022-07-11 8:40 ` Konrad Dybcio 2022-07-10 9:00 ` [PATCH v2 04/11] dt-bindings: display/msm: split qcom, mdss bindings Dmitry Baryshkov 2022-07-10 9:00 ` Dmitry Baryshkov 2022-07-10 16:54 ` Rob Herring 2022-07-10 16:54 ` Rob Herring 2022-07-10 17:00 ` Dmitry Baryshkov 2022-07-10 17:00 ` Dmitry Baryshkov 2022-07-11 11:37 ` Krzysztof Kozlowski 2022-07-11 11:37 ` Krzysztof Kozlowski 2022-08-22 18:57 ` Dmitry Baryshkov 2022-08-22 18:57 ` Dmitry Baryshkov 2022-07-10 9:00 ` [PATCH v2 05/11] dt-bindings: display/msm: move qcom,sdm845-mdss schema to mdss.yaml Dmitry Baryshkov 2022-07-10 9:00 ` [PATCH v2 05/11] dt-bindings: display/msm: move qcom, sdm845-mdss " Dmitry Baryshkov 2022-07-18 17:53 ` [PATCH v2 05/11] dt-bindings: display/msm: move qcom,sdm845-mdss " Rob Herring 2022-07-18 17:53 ` [PATCH v2 05/11] dt-bindings: display/msm: move qcom, sdm845-mdss " Rob Herring 2022-07-10 9:00 ` [PATCH v2 06/11] dt-bindings: display/msm: move qcom,sc7180-mdss " Dmitry Baryshkov 2022-07-10 9:00 ` [PATCH v2 06/11] dt-bindings: display/msm: move qcom, sc7180-mdss " Dmitry Baryshkov 2022-07-18 17:56 ` [PATCH v2 06/11] dt-bindings: display/msm: move qcom,sc7180-mdss " Rob Herring 2022-07-18 17:56 ` [PATCH v2 06/11] dt-bindings: display/msm: move qcom, sc7180-mdss " Rob Herring 2022-08-11 8:25 ` [PATCH v2 06/11] dt-bindings: display/msm: move qcom,sc7180-mdss " Krzysztof Kozlowski 2022-08-11 8:25 ` [PATCH v2 06/11] dt-bindings: display/msm: move qcom, sc7180-mdss " Krzysztof Kozlowski 2022-08-22 19:04 ` [PATCH v2 06/11] dt-bindings: display/msm: move qcom,sc7180-mdss " Dmitry Baryshkov 2022-08-22 19:04 ` [PATCH v2 06/11] dt-bindings: display/msm: move qcom, sc7180-mdss " Dmitry Baryshkov 2022-08-23 11:00 ` Krzysztof Kozlowski 2022-08-23 11:00 ` [PATCH v2 06/11] dt-bindings: display/msm: move qcom,sc7180-mdss " Krzysztof Kozlowski 2022-07-10 9:00 ` [PATCH v2 07/11] dt-bindings: display/msm: move qcom,sc7280-mdss " Dmitry Baryshkov 2022-07-10 9:00 ` [PATCH v2 07/11] dt-bindings: display/msm: move qcom, sc7280-mdss " Dmitry Baryshkov 2022-07-18 17:56 ` [PATCH v2 07/11] dt-bindings: display/msm: move qcom,sc7280-mdss " Rob Herring 2022-07-18 17:56 ` [PATCH v2 07/11] dt-bindings: display/msm: move qcom, sc7280-mdss " Rob Herring 2022-07-10 9:00 ` [PATCH v2 08/11] dt-bindings: display/msm: move qcom,qcm2290-mdss " Dmitry Baryshkov 2022-07-10 9:00 ` [PATCH v2 08/11] dt-bindings: display/msm: move qcom, qcm2290-mdss " Dmitry Baryshkov 2022-07-18 17:57 ` [PATCH v2 08/11] dt-bindings: display/msm: move qcom,qcm2290-mdss " Rob Herring 2022-07-18 17:57 ` Rob Herring 2022-07-10 9:00 ` [PATCH v2 09/11] dt-bindings: display/msm: move qcom,msm8998-mdss " Dmitry Baryshkov 2022-07-10 9:00 ` [PATCH v2 09/11] dt-bindings: display/msm: move qcom, msm8998-mdss " Dmitry Baryshkov 2022-07-18 17:58 ` [PATCH v2 09/11] dt-bindings: display/msm: move qcom,msm8998-mdss " Rob Herring 2022-07-18 17:58 ` Rob Herring 2022-07-10 9:00 ` [PATCH v2 10/11] dt-bindings: display/mdm: add gcc-bus clock to dpu-smd845 Dmitry Baryshkov 2022-07-10 9:00 ` Dmitry Baryshkov 2022-07-18 17:58 ` Rob Herring 2022-07-18 17:58 ` Rob Herring 2022-07-10 9:00 ` Dmitry Baryshkov [this message] 2022-07-10 9:00 ` [PATCH v2 11/11] dt-bindings: display/msm: move common DPU properties to dpu-common.yaml Dmitry Baryshkov 2022-07-18 17:50 ` Rob Herring 2022-07-18 17:50 ` Rob Herring 2022-08-22 20:13 ` Dmitry Baryshkov 2022-08-22 20:13 ` Dmitry Baryshkov 2022-07-16 15:18 ` (subset) [PATCH v2 00/11] dt-bindings: display/msm: rework MDSS and DPU bindings Bjorn Andersson 2022-07-16 15:18 ` Bjorn Andersson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220710090040.35193-12-dmitry.baryshkov@linaro.org \ --to=dmitry.baryshkov@linaro.org \ --cc=agross@kernel.org \ --cc=airlied@linux.ie \ --cc=bjorn.andersson@linaro.org \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=freedreno@lists.freedesktop.org \ --cc=konrad.dybcio@somainline.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=quic_abhinavk@quicinc.com \ --cc=robdclark@gmail.com \ --cc=robh+dt@kernel.org \ --cc=sean@poorly.run \ --cc=swboyd@chromium.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.