All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-kernel@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Conor Dooley <conor.dooley@microchip.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	Vincent Guittot <vincent.guittot@linaro.org>,
	Dietmar Eggemann <dietmar.eggemann@arm.com>,
	Ionela Voinescu <ionela.voinescu@arm.com>,
	Pierre Gondois <pierre.gondois@arm.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-riscv@lists.infradead.org
Subject: [PATCH -next v2 2/2] arch_topology: Fix cache attributes detection in the CPU hotplug path
Date: Fri, 15 Jul 2022 11:26:09 +0100	[thread overview]
Message-ID: <20220715102609.2160689-2-sudeep.holla@arm.com> (raw)
In-Reply-To: <20220715102609.2160689-1-sudeep.holla@arm.com>

init_cpu_topology() is called only once at the boot and all the cache
attributes are detected early for all the possible CPUs. However when
the CPUs are hotplugged out, the cacheinfo gets removed. While the
attributes are added back when the CPUs are hotplugged back in as part
of CPU hotplug state machine, it ends up called quite late after the
update_siblings_masks() are called in the secondary_start_kernel()
resulting in wrong llc_sibling_masks.

Move the call to detect_cache_attributes() inside update_siblings_masks()
to ensure the cacheinfo is updated before the LLC sibling masks are
updated. This will fix the incorrect LLC sibling masks generated when
the CPUs are hotplugged out and hotplugged back in again.

Reported-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/base/arch_topology.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

v1->v2:
	- No change in this patch, but 1/2 was added to fix possible
	  bug "sleeping in the atomic context" with this patch.
	- Added all the received tags

diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
index 441e14ac33a4..0424b59b695e 100644
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -732,7 +732,11 @@ const struct cpumask *cpu_clustergroup_mask(int cpu)
 void update_siblings_masks(unsigned int cpuid)
 {
 	struct cpu_topology *cpu_topo, *cpuid_topo = &cpu_topology[cpuid];
-	int cpu;
+	int cpu, ret;
+
+	ret = detect_cache_attributes(cpuid);
+	if (ret)
+		pr_info("Early cacheinfo failed, ret = %d\n", ret);

 	/* update core and thread sibling masks */
 	for_each_online_cpu(cpu) {
@@ -821,7 +825,7 @@ __weak int __init parse_acpi_topology(void)
 #if defined(CONFIG_ARM64) || defined(CONFIG_RISCV)
 void __init init_cpu_topology(void)
 {
-	int ret, cpu;
+	int ret;

 	reset_cpu_topology();
 	ret = parse_acpi_topology();
@@ -836,13 +840,5 @@ void __init init_cpu_topology(void)
 		reset_cpu_topology();
 		return;
 	}
-
-	for_each_possible_cpu(cpu) {
-		ret = detect_cache_attributes(cpu);
-		if (ret) {
-			pr_info("Early cacheinfo failed, ret = %d\n", ret);
-			break;
-		}
-	}
 }
 #endif
--
2.37.1


WARNING: multiple messages have this Message-ID (diff)
From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-kernel@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Conor Dooley <conor.dooley@microchip.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	Vincent Guittot <vincent.guittot@linaro.org>,
	Dietmar Eggemann <dietmar.eggemann@arm.com>,
	Ionela Voinescu <ionela.voinescu@arm.com>,
	Pierre Gondois <pierre.gondois@arm.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-riscv@lists.infradead.org
Subject: [PATCH -next v2 2/2] arch_topology: Fix cache attributes detection in the CPU hotplug path
Date: Fri, 15 Jul 2022 11:26:09 +0100	[thread overview]
Message-ID: <20220715102609.2160689-2-sudeep.holla@arm.com> (raw)
In-Reply-To: <20220715102609.2160689-1-sudeep.holla@arm.com>

init_cpu_topology() is called only once at the boot and all the cache
attributes are detected early for all the possible CPUs. However when
the CPUs are hotplugged out, the cacheinfo gets removed. While the
attributes are added back when the CPUs are hotplugged back in as part
of CPU hotplug state machine, it ends up called quite late after the
update_siblings_masks() are called in the secondary_start_kernel()
resulting in wrong llc_sibling_masks.

Move the call to detect_cache_attributes() inside update_siblings_masks()
to ensure the cacheinfo is updated before the LLC sibling masks are
updated. This will fix the incorrect LLC sibling masks generated when
the CPUs are hotplugged out and hotplugged back in again.

Reported-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/base/arch_topology.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

v1->v2:
	- No change in this patch, but 1/2 was added to fix possible
	  bug "sleeping in the atomic context" with this patch.
	- Added all the received tags

diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
index 441e14ac33a4..0424b59b695e 100644
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -732,7 +732,11 @@ const struct cpumask *cpu_clustergroup_mask(int cpu)
 void update_siblings_masks(unsigned int cpuid)
 {
 	struct cpu_topology *cpu_topo, *cpuid_topo = &cpu_topology[cpuid];
-	int cpu;
+	int cpu, ret;
+
+	ret = detect_cache_attributes(cpuid);
+	if (ret)
+		pr_info("Early cacheinfo failed, ret = %d\n", ret);

 	/* update core and thread sibling masks */
 	for_each_online_cpu(cpu) {
@@ -821,7 +825,7 @@ __weak int __init parse_acpi_topology(void)
 #if defined(CONFIG_ARM64) || defined(CONFIG_RISCV)
 void __init init_cpu_topology(void)
 {
-	int ret, cpu;
+	int ret;

 	reset_cpu_topology();
 	ret = parse_acpi_topology();
@@ -836,13 +840,5 @@ void __init init_cpu_topology(void)
 		reset_cpu_topology();
 		return;
 	}
-
-	for_each_possible_cpu(cpu) {
-		ret = detect_cache_attributes(cpu);
-		if (ret) {
-			pr_info("Early cacheinfo failed, ret = %d\n", ret);
-			break;
-		}
-	}
 }
 #endif
--
2.37.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

WARNING: multiple messages have this Message-ID (diff)
From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-kernel@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Conor Dooley <conor.dooley@microchip.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	Vincent Guittot <vincent.guittot@linaro.org>,
	Dietmar Eggemann <dietmar.eggemann@arm.com>,
	Ionela Voinescu <ionela.voinescu@arm.com>,
	Pierre Gondois <pierre.gondois@arm.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-riscv@lists.infradead.org
Subject: [PATCH -next v2 2/2] arch_topology: Fix cache attributes detection in the CPU hotplug path
Date: Fri, 15 Jul 2022 11:26:09 +0100	[thread overview]
Message-ID: <20220715102609.2160689-2-sudeep.holla@arm.com> (raw)
In-Reply-To: <20220715102609.2160689-1-sudeep.holla@arm.com>

init_cpu_topology() is called only once at the boot and all the cache
attributes are detected early for all the possible CPUs. However when
the CPUs are hotplugged out, the cacheinfo gets removed. While the
attributes are added back when the CPUs are hotplugged back in as part
of CPU hotplug state machine, it ends up called quite late after the
update_siblings_masks() are called in the secondary_start_kernel()
resulting in wrong llc_sibling_masks.

Move the call to detect_cache_attributes() inside update_siblings_masks()
to ensure the cacheinfo is updated before the LLC sibling masks are
updated. This will fix the incorrect LLC sibling masks generated when
the CPUs are hotplugged out and hotplugged back in again.

Reported-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/base/arch_topology.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

v1->v2:
	- No change in this patch, but 1/2 was added to fix possible
	  bug "sleeping in the atomic context" with this patch.
	- Added all the received tags

diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
index 441e14ac33a4..0424b59b695e 100644
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -732,7 +732,11 @@ const struct cpumask *cpu_clustergroup_mask(int cpu)
 void update_siblings_masks(unsigned int cpuid)
 {
 	struct cpu_topology *cpu_topo, *cpuid_topo = &cpu_topology[cpuid];
-	int cpu;
+	int cpu, ret;
+
+	ret = detect_cache_attributes(cpuid);
+	if (ret)
+		pr_info("Early cacheinfo failed, ret = %d\n", ret);

 	/* update core and thread sibling masks */
 	for_each_online_cpu(cpu) {
@@ -821,7 +825,7 @@ __weak int __init parse_acpi_topology(void)
 #if defined(CONFIG_ARM64) || defined(CONFIG_RISCV)
 void __init init_cpu_topology(void)
 {
-	int ret, cpu;
+	int ret;

 	reset_cpu_topology();
 	ret = parse_acpi_topology();
@@ -836,13 +840,5 @@ void __init init_cpu_topology(void)
 		reset_cpu_topology();
 		return;
 	}
-
-	for_each_possible_cpu(cpu) {
-		ret = detect_cache_attributes(cpu);
-		if (ret) {
-			pr_info("Early cacheinfo failed, ret = %d\n", ret);
-			break;
-		}
-	}
 }
 #endif
--
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-07-15 10:26 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-15 10:26 [PATCH -next v2 1/2] cacheinfo: Use atomic allocation for percpu cache attributes Sudeep Holla
2022-07-15 10:26 ` Sudeep Holla
2022-07-15 10:26 ` Sudeep Holla
2022-07-15 10:26 ` Sudeep Holla [this message]
2022-07-15 10:26   ` [PATCH -next v2 2/2] arch_topology: Fix cache attributes detection in the CPU hotplug path Sudeep Holla
2022-07-15 10:26   ` Sudeep Holla
2022-07-19 15:24   ` Geert Uytterhoeven
2022-07-19 15:24     ` Geert Uytterhoeven
2022-07-19 15:24     ` Geert Uytterhoeven
2022-07-15 10:33 ` [PATCH -next v2 1/2] cacheinfo: Use atomic allocation for percpu cache attributes Conor.Dooley
2022-07-15 10:33   ` Conor.Dooley
2022-07-15 10:33   ` Conor.Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220715102609.2160689-2-sudeep.holla@arm.com \
    --to=sudeep.holla@arm.com \
    --cc=conor.dooley@microchip.com \
    --cc=dietmar.eggemann@arm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=ionela.voinescu@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=pierre.gondois@arm.com \
    --cc=vincent.guittot@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.