[PATCH v9 00/25] drm: Analog TV Improvements

[PATCH v9 00/25] drm: Analog TV Improvements

[Maxime Ripard]

Hi,

Here's a series aiming at improving the command line named modes support,
and more importantly how we deal with all the analog TV variants.

The named modes support were initially introduced to allow to specify the
analog TV mode to be used.

However, this was causing multiple issues:

  * The mode name parsed on the command line was passed directly to the
    driver, which had to figure out which mode it was suppose to match;

  * Figuring that out wasn't really easy, since the video= argument or what
    the userspace might not even have a name in the first place, but
    instead could have passed a mode with the same timings;

  * The fallback to matching on the timings was mostly working as long as
    we were supporting one 525 lines (most likely NSTC) and one 625 lines
    (PAL), but couldn't differentiate between two modes with the same
    timings (NTSC vs PAL-M vs NSTC-J for example);

  * There was also some overlap with the tv mode property registered by
    drm_mode_create_tv_properties(), but named modes weren't interacting
    with that property at all.

  * Even though that property was generic, its possible values were
    specific to each drivers, which made some generic support difficult.

Thus, I chose to tackle in multiple steps:

  * A new TV mode property was introduced, with generic values, each driver
    reporting through a bitmask what standard it supports to the userspace;

  * This option was added to the command line parsing code to be able to
    specify it on the kernel command line, and new atomic_check and reset
    helpers were created to integrate properly into atomic KMS;

  * The named mode parsing code is now creating a proper display mode for
    the given named mode, and the TV standard will thus be part of the
    connector state;

  * Two drivers were converted and tested for now (vc4 and sun4i), with
    some backward compatibility code to translate the old TV mode to the
    new TV mode;

Unit tests were created along the way.

One can switch from NTSC to PAL now using (on vc4)

modetest -M vc4  -s 53:720x480i -w 53:'TV mode':1 # NTSC
modetest -M vc4  -s 53:720x576i -w 53:'TV mode':4 # PAL

Let me know what you think,
Maxime

To: David Airlie <airlied@linux.ie>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Emma Anholt <emma@anholt.net>
To: Jani Nikula <jani.nikula@linux.intel.com>
To: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Ben Skeggs <bskeggs@redhat.com>
To: Karol Herbst <kherbst@redhat.com>
To: Lyude Paul <lyude@redhat.com>
To: Chen-Yu Tsai <wens@csie.org>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: Samuel Holland <samuel@sholland.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dom Cobley <dom@raspberrypi.com>
Cc: Phil Elwell <phil@raspberrypi.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: linux-kernel@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Rename some tests, switch to kunit_test_suite and parameterized tests where
  relevant
- Document the valid named modes
- Link to v8: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v8-0-09ce1466967c@cerno.tech

Changes in v8:
- Changed slightly the helper API to pass in the features
- Removed unused tv_mode_support function
- Removed mode name match in _pick_cmdline_mode
- Added unit tests to the get_modes helper
- Collected Noralf and Mateusz tags
- Rebased on drm-misc-next-2022-11-10
- Link to v7: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v7-0-7072a478c6b3@cerno.tech

Changes in v7:
- Switch to another implementation of get_modes from Noralf
- Made more checks in VEC's atomic_check
- Fixed typo in a commit log
- Checked for tv_mode_specified in drm_mode_parse_command_line_for_connector
- Rebased on drm-misc-next-2022-11-03
- Link to v6: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech

Changes in v6:
- Add and convert to a new get_modes helper to create the PAL and NTSC modes in
  the proper order, with the right preferred mode flag, depending on the driver
  capabilities and defaults.
- Support PAL60
- Renamed tests to be consistent with DRM tests naming convention
- Simplified a bit the named mode parsing code
- Add a tv_mode_specified field
- Return 0 in get_modes implementations instead of error codes
- Link to v5: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v5-0-d841cc64fe4b@cerno.tech

Changes in v5:
- Dropped TV Standard documentation removal
- Switched the TV Mode documentation from CSV to actual documentation
- Switched to kunit assertions where possible
- Switched to KUNIT_ASSERT_NOT_NULL instead of KUNIT_ASSERT_PTR_NE(..., NULL)
- Shuffled a bit the introduction of drm_client_modeset_connector_get_modes between patches
- Renamed tv_mode_names to legacy_tv_mode_names
- Removed the count variable in sun4i_tv_comp_get_modes
- Rebased on top of current drm-misc-next
- Link to v4: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-0-60d38873f782@cerno.tech

Changes in v4:
- Removed the unused TV Standard property documentation
- Added the TV Mode property documentation to kms-properties.csv
- Fixed the documentation of drm_mode_create_tv_properties()
- Removed DRM_MODE_TV_MODE_NONE
- Reworded the line length check comment in drm_mode_analog_tv tests
- Switched to HZ_PER_KHZ in drm_mode_analog_tv tests
- Reworked drm_mode_analog_tv to fill our mode using the previously computed
  timings
- Added the command-line option documentation to modedb.rst
- Improved the Kunit helpers cleanup
- Moved the subconnector documentation renaming to the proper patch
- Added the various review tags
- Removed the count variable in vc4_vec_connector_get_modes
- Rebased on drm-misc-next-2022-09-23 and fixed a merge conflict
- Folded all the named mode parsing improvements in a single patch
- Link to v3: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v2-0-f733a0ed9f90@cerno.tech

Changes in v3:
- Applied some of the fixes to vc4 and sun4i
- Renamed the old TV mode property to legacy_mode
- Fixed a bunch of bisection errors
- Removed most of the redundant TV modes
- Added a new None TV mode to not fall back on NTSC by mistake
- Fixed the mode generation function to match better what is expected
- Added some logging to the mode generation function
- Split the improvements to the named mode parsing logic into separate patches
- Added more checks to the TV atomic_check helper
- Link to v2: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7@cerno.tech/

Changes in v2:
- Kept the older TV mode property as legacy so we can keep the old drivers functional
- Renamed the tv_norm property to tv_mode
- Added a function to create PAL and NTSC compatible display modes
- Added some helpers to instantiate a mock DRM device in Kunit
- More Kunit tests
- Removed the HD analog TV modes
- Renamed some of the tests
- Renamed some of the named modes
- Fixed typos in commit logs
- Added the various tags
- Link to v1: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097@cerno.tech/

---
Mateusz Kwiatkowski (2):
      drm/vc4: vec: Check for VEC output constraints
      drm/vc4: vec: Add support for more analog TV standards

Maxime Ripard (22):
      docs/fb: Document current named modes
      drm/tests: Add Kunit Helpers
      drm/connector: Rename legacy TV property
      drm/connector: Only register TV mode property if present
      drm/connector: Rename drm_mode_create_tv_properties
      drm/connector: Add TV standard property
      drm/modes: Add a function to generate analog display modes
      drm/client: Add some tests for drm_connector_pick_cmdline_mode()
      drm/modes: Move named modes parsing to a separate function
      drm/modes: Switch to named mode descriptors
      drm/modes: Fill drm_cmdline mode from named modes
      drm/connector: Add pixel clock to cmdline mode
      drm/connector: Add a function to lookup a TV mode by its name
      drm/modes: Introduce the tv_mode property as a command-line option
      drm/modes: Properly generate a drm_display_mode from a named mode
      drm/client: Remove match on mode name
      drm/modes: Introduce more named modes
      drm/atomic-helper: Add a TV properties reset helper
      drm/atomic-helper: Add an analog TV atomic_check implementation
      drm/vc4: vec: Use TV Reset implementation
      drm/vc4: vec: Convert to the new TV mode property
      drm/sun4i: tv: Convert to the new TV mode property

Noralf Trønnes (1):
      drm/probe-helper: Provide a TV get_modes helper

 Documentation/fb/modedb.rst                     |  10 +
 Documentation/gpu/drm-kms.rst                   |   6 +
 drivers/gpu/drm/drm_atomic_state_helper.c       | 124 +++++
 drivers/gpu/drm/drm_atomic_uapi.c               |   4 +
 drivers/gpu/drm/drm_client_modeset.c            |   8 +-
 drivers/gpu/drm/drm_connector.c                 | 173 ++++++-
 drivers/gpu/drm/drm_modes.c                     | 634 +++++++++++++++++++++++-
 drivers/gpu/drm/drm_probe_helper.c              |  82 +++
 drivers/gpu/drm/gud/gud_connector.c             |  10 +-
 drivers/gpu/drm/i2c/ch7006_drv.c                |   6 +-
 drivers/gpu/drm/i915/display/intel_tv.c         |   4 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c       |   6 +-
 drivers/gpu/drm/sun4i/sun4i_tv.c                | 141 ++----
 drivers/gpu/drm/tests/Makefile                  |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 183 +++++++
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c |  67 +++
 drivers/gpu/drm/tests/drm_connector_test.c      |  73 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.c       |  64 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.h       |   9 +
 drivers/gpu/drm/tests/drm_modes_test.c          | 142 ++++++
 drivers/gpu/drm/tests/drm_probe_helper_test.c   | 202 ++++++++
 drivers/gpu/drm/vc4/vc4_vec.c                   | 342 +++++++++++--
 include/drm/drm_atomic_state_helper.h           |   4 +
 include/drm/drm_connector.h                     |  89 +++-
 include/drm/drm_mode_config.h                   |  12 +-
 include/drm/drm_modes.h                         |  17 +
 include/drm/drm_probe_helper.h                  |   1 +
 27 files changed, 2209 insertions(+), 208 deletions(-)
---
base-commit: dcf6c3602352a550a6e01667486bde6cbcc770ef
change-id: 20220728-rpi-analog-tv-properties-0914dfcee460

Best regards,
-- 
Maxime Ripard <maxime@cerno.tech>

[Nouveau] [PATCH v9 00/25] drm: Analog TV Improvements

[Maxime Ripard]

Hi,

Here's a series aiming at improving the command line named modes support,
and more importantly how we deal with all the analog TV variants.

The named modes support were initially introduced to allow to specify the
analog TV mode to be used.

However, this was causing multiple issues:

  * The mode name parsed on the command line was passed directly to the
    driver, which had to figure out which mode it was suppose to match;

  * Figuring that out wasn't really easy, since the video= argument or what
    the userspace might not even have a name in the first place, but
    instead could have passed a mode with the same timings;

  * The fallback to matching on the timings was mostly working as long as
    we were supporting one 525 lines (most likely NSTC) and one 625 lines
    (PAL), but couldn't differentiate between two modes with the same
    timings (NTSC vs PAL-M vs NSTC-J for example);

  * There was also some overlap with the tv mode property registered by
    drm_mode_create_tv_properties(), but named modes weren't interacting
    with that property at all.

  * Even though that property was generic, its possible values were
    specific to each drivers, which made some generic support difficult.

Thus, I chose to tackle in multiple steps:

  * A new TV mode property was introduced, with generic values, each driver
    reporting through a bitmask what standard it supports to the userspace;

  * This option was added to the command line parsing code to be able to
    specify it on the kernel command line, and new atomic_check and reset
    helpers were created to integrate properly into atomic KMS;

  * The named mode parsing code is now creating a proper display mode for
    the given named mode, and the TV standard will thus be part of the
    connector state;

  * Two drivers were converted and tested for now (vc4 and sun4i), with
    some backward compatibility code to translate the old TV mode to the
    new TV mode;

Unit tests were created along the way.

One can switch from NTSC to PAL now using (on vc4)

modetest -M vc4  -s 53:720x480i -w 53:'TV mode':1 # NTSC
modetest -M vc4  -s 53:720x576i -w 53:'TV mode':4 # PAL

Let me know what you think,
Maxime

To: David Airlie <airlied@linux.ie>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Emma Anholt <emma@anholt.net>
To: Jani Nikula <jani.nikula@linux.intel.com>
To: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Ben Skeggs <bskeggs@redhat.com>
To: Karol Herbst <kherbst@redhat.com>
To: Lyude Paul <lyude@redhat.com>
To: Chen-Yu Tsai <wens@csie.org>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: Samuel Holland <samuel@sholland.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dom Cobley <dom@raspberrypi.com>
Cc: Phil Elwell <phil@raspberrypi.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: linux-kernel@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Rename some tests, switch to kunit_test_suite and parameterized tests where
  relevant
- Document the valid named modes
- Link to v8: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v8-0-09ce1466967c@cerno.tech

Changes in v8:
- Changed slightly the helper API to pass in the features
- Removed unused tv_mode_support function
- Removed mode name match in _pick_cmdline_mode
- Added unit tests to the get_modes helper
- Collected Noralf and Mateusz tags
- Rebased on drm-misc-next-2022-11-10
- Link to v7: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v7-0-7072a478c6b3@cerno.tech

Changes in v7:
- Switch to another implementation of get_modes from Noralf
- Made more checks in VEC's atomic_check
- Fixed typo in a commit log
- Checked for tv_mode_specified in drm_mode_parse_command_line_for_connector
- Rebased on drm-misc-next-2022-11-03
- Link to v6: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech

Changes in v6:
- Add and convert to a new get_modes helper to create the PAL and NTSC modes in
  the proper order, with the right preferred mode flag, depending on the driver
  capabilities and defaults.
- Support PAL60
- Renamed tests to be consistent with DRM tests naming convention
- Simplified a bit the named mode parsing code
- Add a tv_mode_specified field
- Return 0 in get_modes implementations instead of error codes
- Link to v5: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v5-0-d841cc64fe4b@cerno.tech

Changes in v5:
- Dropped TV Standard documentation removal
- Switched the TV Mode documentation from CSV to actual documentation
- Switched to kunit assertions where possible
- Switched to KUNIT_ASSERT_NOT_NULL instead of KUNIT_ASSERT_PTR_NE(..., NULL)
- Shuffled a bit the introduction of drm_client_modeset_connector_get_modes between patches
- Renamed tv_mode_names to legacy_tv_mode_names
- Removed the count variable in sun4i_tv_comp_get_modes
- Rebased on top of current drm-misc-next
- Link to v4: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-0-60d38873f782@cerno.tech

Changes in v4:
- Removed the unused TV Standard property documentation
- Added the TV Mode property documentation to kms-properties.csv
- Fixed the documentation of drm_mode_create_tv_properties()
- Removed DRM_MODE_TV_MODE_NONE
- Reworded the line length check comment in drm_mode_analog_tv tests
- Switched to HZ_PER_KHZ in drm_mode_analog_tv tests
- Reworked drm_mode_analog_tv to fill our mode using the previously computed
  timings
- Added the command-line option documentation to modedb.rst
- Improved the Kunit helpers cleanup
- Moved the subconnector documentation renaming to the proper patch
- Added the various review tags
- Removed the count variable in vc4_vec_connector_get_modes
- Rebased on drm-misc-next-2022-09-23 and fixed a merge conflict
- Folded all the named mode parsing improvements in a single patch
- Link to v3: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v2-0-f733a0ed9f90@cerno.tech

Changes in v3:
- Applied some of the fixes to vc4 and sun4i
- Renamed the old TV mode property to legacy_mode
- Fixed a bunch of bisection errors
- Removed most of the redundant TV modes
- Added a new None TV mode to not fall back on NTSC by mistake
- Fixed the mode generation function to match better what is expected
- Added some logging to the mode generation function
- Split the improvements to the named mode parsing logic into separate patches
- Added more checks to the TV atomic_check helper
- Link to v2: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7@cerno.tech/

Changes in v2:
- Kept the older TV mode property as legacy so we can keep the old drivers functional
- Renamed the tv_norm property to tv_mode
- Added a function to create PAL and NTSC compatible display modes
- Added some helpers to instantiate a mock DRM device in Kunit
- More Kunit tests
- Removed the HD analog TV modes
- Renamed some of the tests
- Renamed some of the named modes
- Fixed typos in commit logs
- Added the various tags
- Link to v1: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097@cerno.tech/

---
Mateusz Kwiatkowski (2):
      drm/vc4: vec: Check for VEC output constraints
      drm/vc4: vec: Add support for more analog TV standards

Maxime Ripard (22):
      docs/fb: Document current named modes
      drm/tests: Add Kunit Helpers
      drm/connector: Rename legacy TV property
      drm/connector: Only register TV mode property if present
      drm/connector: Rename drm_mode_create_tv_properties
      drm/connector: Add TV standard property
      drm/modes: Add a function to generate analog display modes
      drm/client: Add some tests for drm_connector_pick_cmdline_mode()
      drm/modes: Move named modes parsing to a separate function
      drm/modes: Switch to named mode descriptors
      drm/modes: Fill drm_cmdline mode from named modes
      drm/connector: Add pixel clock to cmdline mode
      drm/connector: Add a function to lookup a TV mode by its name
      drm/modes: Introduce the tv_mode property as a command-line option
      drm/modes: Properly generate a drm_display_mode from a named mode
      drm/client: Remove match on mode name
      drm/modes: Introduce more named modes
      drm/atomic-helper: Add a TV properties reset helper
      drm/atomic-helper: Add an analog TV atomic_check implementation
      drm/vc4: vec: Use TV Reset implementation
      drm/vc4: vec: Convert to the new TV mode property
      drm/sun4i: tv: Convert to the new TV mode property

Noralf Trønnes (1):
      drm/probe-helper: Provide a TV get_modes helper

 Documentation/fb/modedb.rst                     |  10 +
 Documentation/gpu/drm-kms.rst                   |   6 +
 drivers/gpu/drm/drm_atomic_state_helper.c       | 124 +++++
 drivers/gpu/drm/drm_atomic_uapi.c               |   4 +
 drivers/gpu/drm/drm_client_modeset.c            |   8 +-
 drivers/gpu/drm/drm_connector.c                 | 173 ++++++-
 drivers/gpu/drm/drm_modes.c                     | 634 +++++++++++++++++++++++-
 drivers/gpu/drm/drm_probe_helper.c              |  82 +++
 drivers/gpu/drm/gud/gud_connector.c             |  10 +-
 drivers/gpu/drm/i2c/ch7006_drv.c                |   6 +-
 drivers/gpu/drm/i915/display/intel_tv.c         |   4 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c       |   6 +-
 drivers/gpu/drm/sun4i/sun4i_tv.c                | 141 ++----
 drivers/gpu/drm/tests/Makefile                  |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 183 +++++++
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c |  67 +++
 drivers/gpu/drm/tests/drm_connector_test.c      |  73 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.c       |  64 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.h       |   9 +
 drivers/gpu/drm/tests/drm_modes_test.c          | 142 ++++++
 drivers/gpu/drm/tests/drm_probe_helper_test.c   | 202 ++++++++
 drivers/gpu/drm/vc4/vc4_vec.c                   | 342 +++++++++++--
 include/drm/drm_atomic_state_helper.h           |   4 +
 include/drm/drm_connector.h                     |  89 +++-
 include/drm/drm_mode_config.h                   |  12 +-
 include/drm/drm_modes.h                         |  17 +
 include/drm/drm_probe_helper.h                  |   1 +
 27 files changed, 2209 insertions(+), 208 deletions(-)
---
base-commit: dcf6c3602352a550a6e01667486bde6cbcc770ef
change-id: 20220728-rpi-analog-tv-properties-0914dfcee460

Best regards,
-- 
Maxime Ripard <maxime@cerno.tech>

[PATCH v9 00/25] drm: Analog TV Improvements

[Maxime Ripard]

Hi,

Here's a series aiming at improving the command line named modes support,
and more importantly how we deal with all the analog TV variants.

The named modes support were initially introduced to allow to specify the
analog TV mode to be used.

However, this was causing multiple issues:

  * The mode name parsed on the command line was passed directly to the
    driver, which had to figure out which mode it was suppose to match;

  * Figuring that out wasn't really easy, since the video= argument or what
    the userspace might not even have a name in the first place, but
    instead could have passed a mode with the same timings;

  * The fallback to matching on the timings was mostly working as long as
    we were supporting one 525 lines (most likely NSTC) and one 625 lines
    (PAL), but couldn't differentiate between two modes with the same
    timings (NTSC vs PAL-M vs NSTC-J for example);

  * There was also some overlap with the tv mode property registered by
    drm_mode_create_tv_properties(), but named modes weren't interacting
    with that property at all.

  * Even though that property was generic, its possible values were
    specific to each drivers, which made some generic support difficult.

Thus, I chose to tackle in multiple steps:

  * A new TV mode property was introduced, with generic values, each driver
    reporting through a bitmask what standard it supports to the userspace;

  * This option was added to the command line parsing code to be able to
    specify it on the kernel command line, and new atomic_check and reset
    helpers were created to integrate properly into atomic KMS;

  * The named mode parsing code is now creating a proper display mode for
    the given named mode, and the TV standard will thus be part of the
    connector state;

  * Two drivers were converted and tested for now (vc4 and sun4i), with
    some backward compatibility code to translate the old TV mode to the
    new TV mode;

Unit tests were created along the way.

One can switch from NTSC to PAL now using (on vc4)

modetest -M vc4  -s 53:720x480i -w 53:'TV mode':1 # NTSC
modetest -M vc4  -s 53:720x576i -w 53:'TV mode':4 # PAL

Let me know what you think,
Maxime

To: David Airlie <airlied@linux.ie>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Emma Anholt <emma@anholt.net>
To: Jani Nikula <jani.nikula@linux.intel.com>
To: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Ben Skeggs <bskeggs@redhat.com>
To: Karol Herbst <kherbst@redhat.com>
To: Lyude Paul <lyude@redhat.com>
To: Chen-Yu Tsai <wens@csie.org>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: Samuel Holland <samuel@sholland.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dom Cobley <dom@raspberrypi.com>
Cc: Phil Elwell <phil@raspberrypi.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: linux-kernel@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Rename some tests, switch to kunit_test_suite and parameterized tests where
  relevant
- Document the valid named modes
- Link to v8: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v8-0-09ce1466967c@cerno.tech

Changes in v8:
- Changed slightly the helper API to pass in the features
- Removed unused tv_mode_support function
- Removed mode name match in _pick_cmdline_mode
- Added unit tests to the get_modes helper
- Collected Noralf and Mateusz tags
- Rebased on drm-misc-next-2022-11-10
- Link to v7: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v7-0-7072a478c6b3@cerno.tech

Changes in v7:
- Switch to another implementation of get_modes from Noralf
- Made more checks in VEC's atomic_check
- Fixed typo in a commit log
- Checked for tv_mode_specified in drm_mode_parse_command_line_for_connector
- Rebased on drm-misc-next-2022-11-03
- Link to v6: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech

Changes in v6:
- Add and convert to a new get_modes helper to create the PAL and NTSC modes in
  the proper order, with the right preferred mode flag, depending on the driver
  capabilities and defaults.
- Support PAL60
- Renamed tests to be consistent with DRM tests naming convention
- Simplified a bit the named mode parsing code
- Add a tv_mode_specified field
- Return 0 in get_modes implementations instead of error codes
- Link to v5: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v5-0-d841cc64fe4b@cerno.tech

Changes in v5:
- Dropped TV Standard documentation removal
- Switched the TV Mode documentation from CSV to actual documentation
- Switched to kunit assertions where possible
- Switched to KUNIT_ASSERT_NOT_NULL instead of KUNIT_ASSERT_PTR_NE(..., NULL)
- Shuffled a bit the introduction of drm_client_modeset_connector_get_modes between patches
- Renamed tv_mode_names to legacy_tv_mode_names
- Removed the count variable in sun4i_tv_comp_get_modes
- Rebased on top of current drm-misc-next
- Link to v4: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-0-60d38873f782@cerno.tech

Changes in v4:
- Removed the unused TV Standard property documentation
- Added the TV Mode property documentation to kms-properties.csv
- Fixed the documentation of drm_mode_create_tv_properties()
- Removed DRM_MODE_TV_MODE_NONE
- Reworded the line length check comment in drm_mode_analog_tv tests
- Switched to HZ_PER_KHZ in drm_mode_analog_tv tests
- Reworked drm_mode_analog_tv to fill our mode using the previously computed
  timings
- Added the command-line option documentation to modedb.rst
- Improved the Kunit helpers cleanup
- Moved the subconnector documentation renaming to the proper patch
- Added the various review tags
- Removed the count variable in vc4_vec_connector_get_modes
- Rebased on drm-misc-next-2022-09-23 and fixed a merge conflict
- Folded all the named mode parsing improvements in a single patch
- Link to v3: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v2-0-f733a0ed9f90@cerno.tech

Changes in v3:
- Applied some of the fixes to vc4 and sun4i
- Renamed the old TV mode property to legacy_mode
- Fixed a bunch of bisection errors
- Removed most of the redundant TV modes
- Added a new None TV mode to not fall back on NTSC by mistake
- Fixed the mode generation function to match better what is expected
- Added some logging to the mode generation function
- Split the improvements to the named mode parsing logic into separate patches
- Added more checks to the TV atomic_check helper
- Link to v2: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7@cerno.tech/

Changes in v2:
- Kept the older TV mode property as legacy so we can keep the old drivers functional
- Renamed the tv_norm property to tv_mode
- Added a function to create PAL and NTSC compatible display modes
- Added some helpers to instantiate a mock DRM device in Kunit
- More Kunit tests
- Removed the HD analog TV modes
- Renamed some of the tests
- Renamed some of the named modes
- Fixed typos in commit logs
- Added the various tags
- Link to v1: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097@cerno.tech/

---
Mateusz Kwiatkowski (2):
      drm/vc4: vec: Check for VEC output constraints
      drm/vc4: vec: Add support for more analog TV standards

Maxime Ripard (22):
      docs/fb: Document current named modes
      drm/tests: Add Kunit Helpers
      drm/connector: Rename legacy TV property
      drm/connector: Only register TV mode property if present
      drm/connector: Rename drm_mode_create_tv_properties
      drm/connector: Add TV standard property
      drm/modes: Add a function to generate analog display modes
      drm/client: Add some tests for drm_connector_pick_cmdline_mode()
      drm/modes: Move named modes parsing to a separate function
      drm/modes: Switch to named mode descriptors
      drm/modes: Fill drm_cmdline mode from named modes
      drm/connector: Add pixel clock to cmdline mode
      drm/connector: Add a function to lookup a TV mode by its name
      drm/modes: Introduce the tv_mode property as a command-line option
      drm/modes: Properly generate a drm_display_mode from a named mode
      drm/client: Remove match on mode name
      drm/modes: Introduce more named modes
      drm/atomic-helper: Add a TV properties reset helper
      drm/atomic-helper: Add an analog TV atomic_check implementation
      drm/vc4: vec: Use TV Reset implementation
      drm/vc4: vec: Convert to the new TV mode property
      drm/sun4i: tv: Convert to the new TV mode property

Noralf Trønnes (1):
      drm/probe-helper: Provide a TV get_modes helper

 Documentation/fb/modedb.rst                     |  10 +
 Documentation/gpu/drm-kms.rst                   |   6 +
 drivers/gpu/drm/drm_atomic_state_helper.c       | 124 +++++
 drivers/gpu/drm/drm_atomic_uapi.c               |   4 +
 drivers/gpu/drm/drm_client_modeset.c            |   8 +-
 drivers/gpu/drm/drm_connector.c                 | 173 ++++++-
 drivers/gpu/drm/drm_modes.c                     | 634 +++++++++++++++++++++++-
 drivers/gpu/drm/drm_probe_helper.c              |  82 +++
 drivers/gpu/drm/gud/gud_connector.c             |  10 +-
 drivers/gpu/drm/i2c/ch7006_drv.c                |   6 +-
 drivers/gpu/drm/i915/display/intel_tv.c         |   4 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c       |   6 +-
 drivers/gpu/drm/sun4i/sun4i_tv.c                | 141 ++----
 drivers/gpu/drm/tests/Makefile                  |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 183 +++++++
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c |  67 +++
 drivers/gpu/drm/tests/drm_connector_test.c      |  73 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.c       |  64 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.h       |   9 +
 drivers/gpu/drm/tests/drm_modes_test.c          | 142 ++++++
 drivers/gpu/drm/tests/drm_probe_helper_test.c   | 202 ++++++++
 drivers/gpu/drm/vc4/vc4_vec.c                   | 342 +++++++++++--
 include/drm/drm_atomic_state_helper.h           |   4 +
 include/drm/drm_connector.h                     |  89 +++-
 include/drm/drm_mode_config.h                   |  12 +-
 include/drm/drm_modes.h                         |  17 +
 include/drm/drm_probe_helper.h                  |   1 +
 27 files changed, 2209 insertions(+), 208 deletions(-)
---
base-commit: dcf6c3602352a550a6e01667486bde6cbcc770ef
change-id: 20220728-rpi-analog-tv-properties-0914dfcee460

Best regards,
-- 
Maxime Ripard <maxime@cerno.tech>

[Intel-gfx] [PATCH v9 00/25] drm: Analog TV Improvements

[Maxime Ripard]

Hi,

Here's a series aiming at improving the command line named modes support,
and more importantly how we deal with all the analog TV variants.

The named modes support were initially introduced to allow to specify the
analog TV mode to be used.

However, this was causing multiple issues:

  * The mode name parsed on the command line was passed directly to the
    driver, which had to figure out which mode it was suppose to match;

  * Figuring that out wasn't really easy, since the video= argument or what
    the userspace might not even have a name in the first place, but
    instead could have passed a mode with the same timings;

  * The fallback to matching on the timings was mostly working as long as
    we were supporting one 525 lines (most likely NSTC) and one 625 lines
    (PAL), but couldn't differentiate between two modes with the same
    timings (NTSC vs PAL-M vs NSTC-J for example);

  * There was also some overlap with the tv mode property registered by
    drm_mode_create_tv_properties(), but named modes weren't interacting
    with that property at all.

  * Even though that property was generic, its possible values were
    specific to each drivers, which made some generic support difficult.

Thus, I chose to tackle in multiple steps:

  * A new TV mode property was introduced, with generic values, each driver
    reporting through a bitmask what standard it supports to the userspace;

  * This option was added to the command line parsing code to be able to
    specify it on the kernel command line, and new atomic_check and reset
    helpers were created to integrate properly into atomic KMS;

  * The named mode parsing code is now creating a proper display mode for
    the given named mode, and the TV standard will thus be part of the
    connector state;

  * Two drivers were converted and tested for now (vc4 and sun4i), with
    some backward compatibility code to translate the old TV mode to the
    new TV mode;

Unit tests were created along the way.

One can switch from NTSC to PAL now using (on vc4)

modetest -M vc4  -s 53:720x480i -w 53:'TV mode':1 # NTSC
modetest -M vc4  -s 53:720x576i -w 53:'TV mode':4 # PAL

Let me know what you think,
Maxime

To: David Airlie <airlied@linux.ie>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Emma Anholt <emma@anholt.net>
To: Jani Nikula <jani.nikula@linux.intel.com>
To: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Ben Skeggs <bskeggs@redhat.com>
To: Karol Herbst <kherbst@redhat.com>
To: Lyude Paul <lyude@redhat.com>
To: Chen-Yu Tsai <wens@csie.org>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: Samuel Holland <samuel@sholland.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dom Cobley <dom@raspberrypi.com>
Cc: Phil Elwell <phil@raspberrypi.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: linux-kernel@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Rename some tests, switch to kunit_test_suite and parameterized tests where
  relevant
- Document the valid named modes
- Link to v8: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v8-0-09ce1466967c@cerno.tech

Changes in v8:
- Changed slightly the helper API to pass in the features
- Removed unused tv_mode_support function
- Removed mode name match in _pick_cmdline_mode
- Added unit tests to the get_modes helper
- Collected Noralf and Mateusz tags
- Rebased on drm-misc-next-2022-11-10
- Link to v7: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v7-0-7072a478c6b3@cerno.tech

Changes in v7:
- Switch to another implementation of get_modes from Noralf
- Made more checks in VEC's atomic_check
- Fixed typo in a commit log
- Checked for tv_mode_specified in drm_mode_parse_command_line_for_connector
- Rebased on drm-misc-next-2022-11-03
- Link to v6: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech

Changes in v6:
- Add and convert to a new get_modes helper to create the PAL and NTSC modes in
  the proper order, with the right preferred mode flag, depending on the driver
  capabilities and defaults.
- Support PAL60
- Renamed tests to be consistent with DRM tests naming convention
- Simplified a bit the named mode parsing code
- Add a tv_mode_specified field
- Return 0 in get_modes implementations instead of error codes
- Link to v5: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v5-0-d841cc64fe4b@cerno.tech

Changes in v5:
- Dropped TV Standard documentation removal
- Switched the TV Mode documentation from CSV to actual documentation
- Switched to kunit assertions where possible
- Switched to KUNIT_ASSERT_NOT_NULL instead of KUNIT_ASSERT_PTR_NE(..., NULL)
- Shuffled a bit the introduction of drm_client_modeset_connector_get_modes between patches
- Renamed tv_mode_names to legacy_tv_mode_names
- Removed the count variable in sun4i_tv_comp_get_modes
- Rebased on top of current drm-misc-next
- Link to v4: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-0-60d38873f782@cerno.tech

Changes in v4:
- Removed the unused TV Standard property documentation
- Added the TV Mode property documentation to kms-properties.csv
- Fixed the documentation of drm_mode_create_tv_properties()
- Removed DRM_MODE_TV_MODE_NONE
- Reworded the line length check comment in drm_mode_analog_tv tests
- Switched to HZ_PER_KHZ in drm_mode_analog_tv tests
- Reworked drm_mode_analog_tv to fill our mode using the previously computed
  timings
- Added the command-line option documentation to modedb.rst
- Improved the Kunit helpers cleanup
- Moved the subconnector documentation renaming to the proper patch
- Added the various review tags
- Removed the count variable in vc4_vec_connector_get_modes
- Rebased on drm-misc-next-2022-09-23 and fixed a merge conflict
- Folded all the named mode parsing improvements in a single patch
- Link to v3: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v2-0-f733a0ed9f90@cerno.tech

Changes in v3:
- Applied some of the fixes to vc4 and sun4i
- Renamed the old TV mode property to legacy_mode
- Fixed a bunch of bisection errors
- Removed most of the redundant TV modes
- Added a new None TV mode to not fall back on NTSC by mistake
- Fixed the mode generation function to match better what is expected
- Added some logging to the mode generation function
- Split the improvements to the named mode parsing logic into separate patches
- Added more checks to the TV atomic_check helper
- Link to v2: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7@cerno.tech/

Changes in v2:
- Kept the older TV mode property as legacy so we can keep the old drivers functional
- Renamed the tv_norm property to tv_mode
- Added a function to create PAL and NTSC compatible display modes
- Added some helpers to instantiate a mock DRM device in Kunit
- More Kunit tests
- Removed the HD analog TV modes
- Renamed some of the tests
- Renamed some of the named modes
- Fixed typos in commit logs
- Added the various tags
- Link to v1: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097@cerno.tech/

---
Mateusz Kwiatkowski (2):
      drm/vc4: vec: Check for VEC output constraints
      drm/vc4: vec: Add support for more analog TV standards

Maxime Ripard (22):
      docs/fb: Document current named modes
      drm/tests: Add Kunit Helpers
      drm/connector: Rename legacy TV property
      drm/connector: Only register TV mode property if present
      drm/connector: Rename drm_mode_create_tv_properties
      drm/connector: Add TV standard property
      drm/modes: Add a function to generate analog display modes
      drm/client: Add some tests for drm_connector_pick_cmdline_mode()
      drm/modes: Move named modes parsing to a separate function
      drm/modes: Switch to named mode descriptors
      drm/modes: Fill drm_cmdline mode from named modes
      drm/connector: Add pixel clock to cmdline mode
      drm/connector: Add a function to lookup a TV mode by its name
      drm/modes: Introduce the tv_mode property as a command-line option
      drm/modes: Properly generate a drm_display_mode from a named mode
      drm/client: Remove match on mode name
      drm/modes: Introduce more named modes
      drm/atomic-helper: Add a TV properties reset helper
      drm/atomic-helper: Add an analog TV atomic_check implementation
      drm/vc4: vec: Use TV Reset implementation
      drm/vc4: vec: Convert to the new TV mode property
      drm/sun4i: tv: Convert to the new TV mode property

Noralf Trønnes (1):
      drm/probe-helper: Provide a TV get_modes helper

 Documentation/fb/modedb.rst                     |  10 +
 Documentation/gpu/drm-kms.rst                   |   6 +
 drivers/gpu/drm/drm_atomic_state_helper.c       | 124 +++++
 drivers/gpu/drm/drm_atomic_uapi.c               |   4 +
 drivers/gpu/drm/drm_client_modeset.c            |   8 +-
 drivers/gpu/drm/drm_connector.c                 | 173 ++++++-
 drivers/gpu/drm/drm_modes.c                     | 634 +++++++++++++++++++++++-
 drivers/gpu/drm/drm_probe_helper.c              |  82 +++
 drivers/gpu/drm/gud/gud_connector.c             |  10 +-
 drivers/gpu/drm/i2c/ch7006_drv.c                |   6 +-
 drivers/gpu/drm/i915/display/intel_tv.c         |   4 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c       |   6 +-
 drivers/gpu/drm/sun4i/sun4i_tv.c                | 141 ++----
 drivers/gpu/drm/tests/Makefile                  |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 183 +++++++
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c |  67 +++
 drivers/gpu/drm/tests/drm_connector_test.c      |  73 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.c       |  64 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.h       |   9 +
 drivers/gpu/drm/tests/drm_modes_test.c          | 142 ++++++
 drivers/gpu/drm/tests/drm_probe_helper_test.c   | 202 ++++++++
 drivers/gpu/drm/vc4/vc4_vec.c                   | 342 +++++++++++--
 include/drm/drm_atomic_state_helper.h           |   4 +
 include/drm/drm_connector.h                     |  89 +++-
 include/drm/drm_mode_config.h                   |  12 +-
 include/drm/drm_modes.h                         |  17 +
 include/drm/drm_probe_helper.h                  |   1 +
 27 files changed, 2209 insertions(+), 208 deletions(-)
---
base-commit: dcf6c3602352a550a6e01667486bde6cbcc770ef
change-id: 20220728-rpi-analog-tv-properties-0914dfcee460

Best regards,
-- 
Maxime Ripard <maxime@cerno.tech>

[PATCH v9 00/25] drm: Analog TV Improvements

[Maxime Ripard]

Hi,

Here's a series aiming at improving the command line named modes support,
and more importantly how we deal with all the analog TV variants.

The named modes support were initially introduced to allow to specify the
analog TV mode to be used.

However, this was causing multiple issues:

  * The mode name parsed on the command line was passed directly to the
    driver, which had to figure out which mode it was suppose to match;

  * Figuring that out wasn't really easy, since the video= argument or what
    the userspace might not even have a name in the first place, but
    instead could have passed a mode with the same timings;

  * The fallback to matching on the timings was mostly working as long as
    we were supporting one 525 lines (most likely NSTC) and one 625 lines
    (PAL), but couldn't differentiate between two modes with the same
    timings (NTSC vs PAL-M vs NSTC-J for example);

  * There was also some overlap with the tv mode property registered by
    drm_mode_create_tv_properties(), but named modes weren't interacting
    with that property at all.

  * Even though that property was generic, its possible values were
    specific to each drivers, which made some generic support difficult.

Thus, I chose to tackle in multiple steps:

  * A new TV mode property was introduced, with generic values, each driver
    reporting through a bitmask what standard it supports to the userspace;

  * This option was added to the command line parsing code to be able to
    specify it on the kernel command line, and new atomic_check and reset
    helpers were created to integrate properly into atomic KMS;

  * The named mode parsing code is now creating a proper display mode for
    the given named mode, and the TV standard will thus be part of the
    connector state;

  * Two drivers were converted and tested for now (vc4 and sun4i), with
    some backward compatibility code to translate the old TV mode to the
    new TV mode;

Unit tests were created along the way.

One can switch from NTSC to PAL now using (on vc4)

modetest -M vc4  -s 53:720x480i -w 53:'TV mode':1 # NTSC
modetest -M vc4  -s 53:720x576i -w 53:'TV mode':4 # PAL

Let me know what you think,
Maxime

To: David Airlie <airlied@linux.ie>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Emma Anholt <emma@anholt.net>
To: Jani Nikula <jani.nikula@linux.intel.com>
To: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Ben Skeggs <bskeggs@redhat.com>
To: Karol Herbst <kherbst@redhat.com>
To: Lyude Paul <lyude@redhat.com>
To: Chen-Yu Tsai <wens@csie.org>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: Samuel Holland <samuel@sholland.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dom Cobley <dom@raspberrypi.com>
Cc: Phil Elwell <phil@raspberrypi.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: linux-kernel@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Rename some tests, switch to kunit_test_suite and parameterized tests where
  relevant
- Document the valid named modes
- Link to v8: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v8-0-09ce1466967c@cerno.tech

Changes in v8:
- Changed slightly the helper API to pass in the features
- Removed unused tv_mode_support function
- Removed mode name match in _pick_cmdline_mode
- Added unit tests to the get_modes helper
- Collected Noralf and Mateusz tags
- Rebased on drm-misc-next-2022-11-10
- Link to v7: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v7-0-7072a478c6b3@cerno.tech

Changes in v7:
- Switch to another implementation of get_modes from Noralf
- Made more checks in VEC's atomic_check
- Fixed typo in a commit log
- Checked for tv_mode_specified in drm_mode_parse_command_line_for_connector
- Rebased on drm-misc-next-2022-11-03
- Link to v6: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech

Changes in v6:
- Add and convert to a new get_modes helper to create the PAL and NTSC modes in
  the proper order, with the right preferred mode flag, depending on the driver
  capabilities and defaults.
- Support PAL60
- Renamed tests to be consistent with DRM tests naming convention
- Simplified a bit the named mode parsing code
- Add a tv_mode_specified field
- Return 0 in get_modes implementations instead of error codes
- Link to v5: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v5-0-d841cc64fe4b@cerno.tech

Changes in v5:
- Dropped TV Standard documentation removal
- Switched the TV Mode documentation from CSV to actual documentation
- Switched to kunit assertions where possible
- Switched to KUNIT_ASSERT_NOT_NULL instead of KUNIT_ASSERT_PTR_NE(..., NULL)
- Shuffled a bit the introduction of drm_client_modeset_connector_get_modes between patches
- Renamed tv_mode_names to legacy_tv_mode_names
- Removed the count variable in sun4i_tv_comp_get_modes
- Rebased on top of current drm-misc-next
- Link to v4: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-0-60d38873f782@cerno.tech

Changes in v4:
- Removed the unused TV Standard property documentation
- Added the TV Mode property documentation to kms-properties.csv
- Fixed the documentation of drm_mode_create_tv_properties()
- Removed DRM_MODE_TV_MODE_NONE
- Reworded the line length check comment in drm_mode_analog_tv tests
- Switched to HZ_PER_KHZ in drm_mode_analog_tv tests
- Reworked drm_mode_analog_tv to fill our mode using the previously computed
  timings
- Added the command-line option documentation to modedb.rst
- Improved the Kunit helpers cleanup
- Moved the subconnector documentation renaming to the proper patch
- Added the various review tags
- Removed the count variable in vc4_vec_connector_get_modes
- Rebased on drm-misc-next-2022-09-23 and fixed a merge conflict
- Folded all the named mode parsing improvements in a single patch
- Link to v3: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v2-0-f733a0ed9f90@cerno.tech

Changes in v3:
- Applied some of the fixes to vc4 and sun4i
- Renamed the old TV mode property to legacy_mode
- Fixed a bunch of bisection errors
- Removed most of the redundant TV modes
- Added a new None TV mode to not fall back on NTSC by mistake
- Fixed the mode generation function to match better what is expected
- Added some logging to the mode generation function
- Split the improvements to the named mode parsing logic into separate patches
- Added more checks to the TV atomic_check helper
- Link to v2: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7@cerno.tech/

Changes in v2:
- Kept the older TV mode property as legacy so we can keep the old drivers functional
- Renamed the tv_norm property to tv_mode
- Added a function to create PAL and NTSC compatible display modes
- Added some helpers to instantiate a mock DRM device in Kunit
- More Kunit tests
- Removed the HD analog TV modes
- Renamed some of the tests
- Renamed some of the named modes
- Fixed typos in commit logs
- Added the various tags
- Link to v1: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097@cerno.tech/

---
Mateusz Kwiatkowski (2):
      drm/vc4: vec: Check for VEC output constraints
      drm/vc4: vec: Add support for more analog TV standards

Maxime Ripard (22):
      docs/fb: Document current named modes
      drm/tests: Add Kunit Helpers
      drm/connector: Rename legacy TV property
      drm/connector: Only register TV mode property if present
      drm/connector: Rename drm_mode_create_tv_properties
      drm/connector: Add TV standard property
      drm/modes: Add a function to generate analog display modes
      drm/client: Add some tests for drm_connector_pick_cmdline_mode()
      drm/modes: Move named modes parsing to a separate function
      drm/modes: Switch to named mode descriptors
      drm/modes: Fill drm_cmdline mode from named modes
      drm/connector: Add pixel clock to cmdline mode
      drm/connector: Add a function to lookup a TV mode by its name
      drm/modes: Introduce the tv_mode property as a command-line option
      drm/modes: Properly generate a drm_display_mode from a named mode
      drm/client: Remove match on mode name
      drm/modes: Introduce more named modes
      drm/atomic-helper: Add a TV properties reset helper
      drm/atomic-helper: Add an analog TV atomic_check implementation
      drm/vc4: vec: Use TV Reset implementation
      drm/vc4: vec: Convert to the new TV mode property
      drm/sun4i: tv: Convert to the new TV mode property

Noralf Trønnes (1):
      drm/probe-helper: Provide a TV get_modes helper

 Documentation/fb/modedb.rst                     |  10 +
 Documentation/gpu/drm-kms.rst                   |   6 +
 drivers/gpu/drm/drm_atomic_state_helper.c       | 124 +++++
 drivers/gpu/drm/drm_atomic_uapi.c               |   4 +
 drivers/gpu/drm/drm_client_modeset.c            |   8 +-
 drivers/gpu/drm/drm_connector.c                 | 173 ++++++-
 drivers/gpu/drm/drm_modes.c                     | 634 +++++++++++++++++++++++-
 drivers/gpu/drm/drm_probe_helper.c              |  82 +++
 drivers/gpu/drm/gud/gud_connector.c             |  10 +-
 drivers/gpu/drm/i2c/ch7006_drv.c                |   6 +-
 drivers/gpu/drm/i915/display/intel_tv.c         |   4 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c       |   6 +-
 drivers/gpu/drm/sun4i/sun4i_tv.c                | 141 ++----
 drivers/gpu/drm/tests/Makefile                  |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 183 +++++++
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c |  67 +++
 drivers/gpu/drm/tests/drm_connector_test.c      |  73 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.c       |  64 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.h       |   9 +
 drivers/gpu/drm/tests/drm_modes_test.c          | 142 ++++++
 drivers/gpu/drm/tests/drm_probe_helper_test.c   | 202 ++++++++
 drivers/gpu/drm/vc4/vc4_vec.c                   | 342 +++++++++++--
 include/drm/drm_atomic_state_helper.h           |   4 +
 include/drm/drm_connector.h                     |  89 +++-
 include/drm/drm_mode_config.h                   |  12 +-
 include/drm/drm_modes.h                         |  17 +
 include/drm/drm_probe_helper.h                  |   1 +
 27 files changed, 2209 insertions(+), 208 deletions(-)
---
base-commit: dcf6c3602352a550a6e01667486bde6cbcc770ef
change-id: 20220728-rpi-analog-tv-properties-0914dfcee460

Best regards,
-- 
Maxime Ripard <maxime@cerno.tech>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 01/25] docs/fb: Document current named modes

[Maxime Ripard]

KMS supports a number of named modes already, but it's never been
documented anywhere, let's fix that.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- New patch
---
 Documentation/fb/modedb.rst | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index 4d2411e32ebb..e53375033146 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -26,6 +26,11 @@ Valid mode specifiers (mode_option argument)::
 with <xres>, <yres>, <bpp> and <refresh> decimal numbers and <name> a string.
 Things between square brackets are optional.
 
+Valid names are::
+
+  - NSTC: 480i output, with the CCIR System-M TV mode and NTSC color encoding
+  - PAL: 576i output, with the CCIR System-B TV mode and PAL color encoding
+
 If 'M' is specified in the mode_option argument (after <yres> and before
 <bpp> and <refresh>, if specified) the timings will be calculated using
 VESA(TM) Coordinated Video Timings instead of looking up the mode from a table.

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 01/25] docs/fb: Document current named modes

[Maxime Ripard]

KMS supports a number of named modes already, but it's never been
documented anywhere, let's fix that.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- New patch
---
 Documentation/fb/modedb.rst | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index 4d2411e32ebb..e53375033146 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -26,6 +26,11 @@ Valid mode specifiers (mode_option argument)::
 with <xres>, <yres>, <bpp> and <refresh> decimal numbers and <name> a string.
 Things between square brackets are optional.
 
+Valid names are::
+
+  - NSTC: 480i output, with the CCIR System-M TV mode and NTSC color encoding
+  - PAL: 576i output, with the CCIR System-B TV mode and PAL color encoding
+
 If 'M' is specified in the mode_option argument (after <yres> and before
 <bpp> and <refresh>, if specified) the timings will be calculated using
 VESA(TM) Coordinated Video Timings instead of looking up the mode from a table.

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 01/25] docs/fb: Document current named modes

[Maxime Ripard]

KMS supports a number of named modes already, but it's never been
documented anywhere, let's fix that.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- New patch
---
 Documentation/fb/modedb.rst | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index 4d2411e32ebb..e53375033146 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -26,6 +26,11 @@ Valid mode specifiers (mode_option argument)::
 with <xres>, <yres>, <bpp> and <refresh> decimal numbers and <name> a string.
 Things between square brackets are optional.
 
+Valid names are::
+
+  - NSTC: 480i output, with the CCIR System-M TV mode and NTSC color encoding
+  - PAL: 576i output, with the CCIR System-B TV mode and PAL color encoding
+
 If 'M' is specified in the mode_option argument (after <yres> and before
 <bpp> and <refresh>, if specified) the timings will be calculated using
 VESA(TM) Coordinated Video Timings instead of looking up the mode from a table.

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 01/25] docs/fb: Document current named modes

[Maxime Ripard]

KMS supports a number of named modes already, but it's never been
documented anywhere, let's fix that.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- New patch
---
 Documentation/fb/modedb.rst | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index 4d2411e32ebb..e53375033146 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -26,6 +26,11 @@ Valid mode specifiers (mode_option argument)::
 with <xres>, <yres>, <bpp> and <refresh> decimal numbers and <name> a string.
 Things between square brackets are optional.
 
+Valid names are::
+
+  - NSTC: 480i output, with the CCIR System-M TV mode and NTSC color encoding
+  - PAL: 576i output, with the CCIR System-B TV mode and PAL color encoding
+
 If 'M' is specified in the mode_option argument (after <yres> and before
 <bpp> and <refresh>, if specified) the timings will be calculated using
 VESA(TM) Coordinated Video Timings instead of looking up the mode from a table.

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 01/25] docs/fb: Document current named modes

[Maxime Ripard]

KMS supports a number of named modes already, but it's never been
documented anywhere, let's fix that.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- New patch
---
 Documentation/fb/modedb.rst | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index 4d2411e32ebb..e53375033146 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -26,6 +26,11 @@ Valid mode specifiers (mode_option argument)::
 with <xres>, <yres>, <bpp> and <refresh> decimal numbers and <name> a string.
 Things between square brackets are optional.
 
+Valid names are::
+
+  - NSTC: 480i output, with the CCIR System-M TV mode and NTSC color encoding
+  - PAL: 576i output, with the CCIR System-B TV mode and PAL color encoding
+
 If 'M' is specified in the mode_option argument (after <yres> and before
 <bpp> and <refresh>, if specified) the timings will be calculated using
 VESA(TM) Coordinated Video Timings instead of looking up the mode from a table.

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 02/25] drm/tests: Add Kunit Helpers

[Maxime Ripard]

As the number of kunit tests in KMS grows further, we start to have
multiple test suites that, for example, need to register a mock DRM
driver to interact with the KMS function they are supposed to test.

Let's add a file meant to provide those kind of helpers to avoid
duplication.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- Changed the API a bit to pass the features as argument

Changes in v4:
- Simplified the DRM device cleanup patch using devm_drm_dev_alloc()
---
 drivers/gpu/drm/tests/Makefile            |  1 +
 drivers/gpu/drm/tests/drm_kunit_helpers.c | 64 +++++++++++++++++++++++++++++++
 drivers/gpu/drm/tests/drm_kunit_helpers.h |  9 +++++
 3 files changed, 74 insertions(+)

diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index 2d9f49b62ecb..b29ef1085cad 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_format_helper_test.o \
 	drm_format_test.o \
 	drm_framebuffer_test.o \
+	drm_kunit_helpers.o \
 	drm_mm_test.o \
 	drm_plane_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.c b/drivers/gpu/drm/tests/drm_kunit_helpers.c
new file mode 100644
index 000000000000..d3f0d681b685
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.c
@@ -0,0 +1,64 @@
+#include <drm/drm_drv.h>
+#include <drm/drm_managed.h>
+
+#include <kunit/resource.h>
+
+#include <linux/device.h>
+
+struct kunit_dev {
+	struct drm_device base;
+};
+
+static const struct drm_mode_config_funcs drm_mode_config_funcs = {
+};
+
+static int dev_init(struct kunit_resource *res, void *ptr)
+{
+	char *name = ptr;
+	struct device *dev;
+
+	dev = root_device_register(name);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	res->data = dev;
+	return 0;
+}
+
+static void dev_free(struct kunit_resource *res)
+{
+	struct device *dev = res->data;
+
+	root_device_unregister(dev);
+}
+
+struct drm_device *drm_kunit_device_init(struct kunit *test, u32 features, char *name)
+{
+	struct kunit_dev *kdev;
+	struct drm_device *drm;
+	struct drm_driver *driver;
+	struct device *dev;
+	int ret;
+
+	dev = kunit_alloc_resource(test, dev_init, dev_free, GFP_KERNEL, name);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	driver = kunit_kzalloc(test, sizeof(*driver), GFP_KERNEL);
+	if (!driver)
+		return ERR_PTR(-ENOMEM);
+
+	driver->driver_features = features;
+	kdev = devm_drm_dev_alloc(dev, driver, struct kunit_dev, base);
+	if (IS_ERR(kdev))
+		return ERR_CAST(kdev);
+
+	drm = &kdev->base;
+	drm->mode_config.funcs = &drm_mode_config_funcs;
+
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return drm;
+}
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.h b/drivers/gpu/drm/tests/drm_kunit_helpers.h
new file mode 100644
index 000000000000..f13a18dd1c6d
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.h
@@ -0,0 +1,9 @@
+#ifndef DRM_KUNIT_HELPERS_H_
+#define DRM_KUNIT_HELPERS_H_
+
+struct drm_device;
+struct kunit;
+
+struct drm_device *drm_kunit_device_init(struct kunit *test, u32 features, char *name);
+
+#endif // DRM_KUNIT_HELPERS_H_

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 02/25] drm/tests: Add Kunit Helpers

[Maxime Ripard]

As the number of kunit tests in KMS grows further, we start to have
multiple test suites that, for example, need to register a mock DRM
driver to interact with the KMS function they are supposed to test.

Let's add a file meant to provide those kind of helpers to avoid
duplication.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- Changed the API a bit to pass the features as argument

Changes in v4:
- Simplified the DRM device cleanup patch using devm_drm_dev_alloc()
---
 drivers/gpu/drm/tests/Makefile            |  1 +
 drivers/gpu/drm/tests/drm_kunit_helpers.c | 64 +++++++++++++++++++++++++++++++
 drivers/gpu/drm/tests/drm_kunit_helpers.h |  9 +++++
 3 files changed, 74 insertions(+)

diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index 2d9f49b62ecb..b29ef1085cad 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_format_helper_test.o \
 	drm_format_test.o \
 	drm_framebuffer_test.o \
+	drm_kunit_helpers.o \
 	drm_mm_test.o \
 	drm_plane_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.c b/drivers/gpu/drm/tests/drm_kunit_helpers.c
new file mode 100644
index 000000000000..d3f0d681b685
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.c
@@ -0,0 +1,64 @@
+#include <drm/drm_drv.h>
+#include <drm/drm_managed.h>
+
+#include <kunit/resource.h>
+
+#include <linux/device.h>
+
+struct kunit_dev {
+	struct drm_device base;
+};
+
+static const struct drm_mode_config_funcs drm_mode_config_funcs = {
+};
+
+static int dev_init(struct kunit_resource *res, void *ptr)
+{
+	char *name = ptr;
+	struct device *dev;
+
+	dev = root_device_register(name);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	res->data = dev;
+	return 0;
+}
+
+static void dev_free(struct kunit_resource *res)
+{
+	struct device *dev = res->data;
+
+	root_device_unregister(dev);
+}
+
+struct drm_device *drm_kunit_device_init(struct kunit *test, u32 features, char *name)
+{
+	struct kunit_dev *kdev;
+	struct drm_device *drm;
+	struct drm_driver *driver;
+	struct device *dev;
+	int ret;
+
+	dev = kunit_alloc_resource(test, dev_init, dev_free, GFP_KERNEL, name);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	driver = kunit_kzalloc(test, sizeof(*driver), GFP_KERNEL);
+	if (!driver)
+		return ERR_PTR(-ENOMEM);
+
+	driver->driver_features = features;
+	kdev = devm_drm_dev_alloc(dev, driver, struct kunit_dev, base);
+	if (IS_ERR(kdev))
+		return ERR_CAST(kdev);
+
+	drm = &kdev->base;
+	drm->mode_config.funcs = &drm_mode_config_funcs;
+
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return drm;
+}
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.h b/drivers/gpu/drm/tests/drm_kunit_helpers.h
new file mode 100644
index 000000000000..f13a18dd1c6d
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.h
@@ -0,0 +1,9 @@
+#ifndef DRM_KUNIT_HELPERS_H_
+#define DRM_KUNIT_HELPERS_H_
+
+struct drm_device;
+struct kunit;
+
+struct drm_device *drm_kunit_device_init(struct kunit *test, u32 features, char *name);
+
+#endif // DRM_KUNIT_HELPERS_H_

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 02/25] drm/tests: Add Kunit Helpers

[Maxime Ripard]

As the number of kunit tests in KMS grows further, we start to have
multiple test suites that, for example, need to register a mock DRM
driver to interact with the KMS function they are supposed to test.

Let's add a file meant to provide those kind of helpers to avoid
duplication.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- Changed the API a bit to pass the features as argument

Changes in v4:
- Simplified the DRM device cleanup patch using devm_drm_dev_alloc()
---
 drivers/gpu/drm/tests/Makefile            |  1 +
 drivers/gpu/drm/tests/drm_kunit_helpers.c | 64 +++++++++++++++++++++++++++++++
 drivers/gpu/drm/tests/drm_kunit_helpers.h |  9 +++++
 3 files changed, 74 insertions(+)

diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index 2d9f49b62ecb..b29ef1085cad 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_format_helper_test.o \
 	drm_format_test.o \
 	drm_framebuffer_test.o \
+	drm_kunit_helpers.o \
 	drm_mm_test.o \
 	drm_plane_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.c b/drivers/gpu/drm/tests/drm_kunit_helpers.c
new file mode 100644
index 000000000000..d3f0d681b685
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.c
@@ -0,0 +1,64 @@
+#include <drm/drm_drv.h>
+#include <drm/drm_managed.h>
+
+#include <kunit/resource.h>
+
+#include <linux/device.h>
+
+struct kunit_dev {
+	struct drm_device base;
+};
+
+static const struct drm_mode_config_funcs drm_mode_config_funcs = {
+};
+
+static int dev_init(struct kunit_resource *res, void *ptr)
+{
+	char *name = ptr;
+	struct device *dev;
+
+	dev = root_device_register(name);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	res->data = dev;
+	return 0;
+}
+
+static void dev_free(struct kunit_resource *res)
+{
+	struct device *dev = res->data;
+
+	root_device_unregister(dev);
+}
+
+struct drm_device *drm_kunit_device_init(struct kunit *test, u32 features, char *name)
+{
+	struct kunit_dev *kdev;
+	struct drm_device *drm;
+	struct drm_driver *driver;
+	struct device *dev;
+	int ret;
+
+	dev = kunit_alloc_resource(test, dev_init, dev_free, GFP_KERNEL, name);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	driver = kunit_kzalloc(test, sizeof(*driver), GFP_KERNEL);
+	if (!driver)
+		return ERR_PTR(-ENOMEM);
+
+	driver->driver_features = features;
+	kdev = devm_drm_dev_alloc(dev, driver, struct kunit_dev, base);
+	if (IS_ERR(kdev))
+		return ERR_CAST(kdev);
+
+	drm = &kdev->base;
+	drm->mode_config.funcs = &drm_mode_config_funcs;
+
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return drm;
+}
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.h b/drivers/gpu/drm/tests/drm_kunit_helpers.h
new file mode 100644
index 000000000000..f13a18dd1c6d
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.h
@@ -0,0 +1,9 @@
+#ifndef DRM_KUNIT_HELPERS_H_
+#define DRM_KUNIT_HELPERS_H_
+
+struct drm_device;
+struct kunit;
+
+struct drm_device *drm_kunit_device_init(struct kunit *test, u32 features, char *name);
+
+#endif // DRM_KUNIT_HELPERS_H_

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 02/25] drm/tests: Add Kunit Helpers

[Maxime Ripard]

As the number of kunit tests in KMS grows further, we start to have
multiple test suites that, for example, need to register a mock DRM
driver to interact with the KMS function they are supposed to test.

Let's add a file meant to provide those kind of helpers to avoid
duplication.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- Changed the API a bit to pass the features as argument

Changes in v4:
- Simplified the DRM device cleanup patch using devm_drm_dev_alloc()
---
 drivers/gpu/drm/tests/Makefile            |  1 +
 drivers/gpu/drm/tests/drm_kunit_helpers.c | 64 +++++++++++++++++++++++++++++++
 drivers/gpu/drm/tests/drm_kunit_helpers.h |  9 +++++
 3 files changed, 74 insertions(+)

diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index 2d9f49b62ecb..b29ef1085cad 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_format_helper_test.o \
 	drm_format_test.o \
 	drm_framebuffer_test.o \
+	drm_kunit_helpers.o \
 	drm_mm_test.o \
 	drm_plane_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.c b/drivers/gpu/drm/tests/drm_kunit_helpers.c
new file mode 100644
index 000000000000..d3f0d681b685
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.c
@@ -0,0 +1,64 @@
+#include <drm/drm_drv.h>
+#include <drm/drm_managed.h>
+
+#include <kunit/resource.h>
+
+#include <linux/device.h>
+
+struct kunit_dev {
+	struct drm_device base;
+};
+
+static const struct drm_mode_config_funcs drm_mode_config_funcs = {
+};
+
+static int dev_init(struct kunit_resource *res, void *ptr)
+{
+	char *name = ptr;
+	struct device *dev;
+
+	dev = root_device_register(name);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	res->data = dev;
+	return 0;
+}
+
+static void dev_free(struct kunit_resource *res)
+{
+	struct device *dev = res->data;
+
+	root_device_unregister(dev);
+}
+
+struct drm_device *drm_kunit_device_init(struct kunit *test, u32 features, char *name)
+{
+	struct kunit_dev *kdev;
+	struct drm_device *drm;
+	struct drm_driver *driver;
+	struct device *dev;
+	int ret;
+
+	dev = kunit_alloc_resource(test, dev_init, dev_free, GFP_KERNEL, name);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	driver = kunit_kzalloc(test, sizeof(*driver), GFP_KERNEL);
+	if (!driver)
+		return ERR_PTR(-ENOMEM);
+
+	driver->driver_features = features;
+	kdev = devm_drm_dev_alloc(dev, driver, struct kunit_dev, base);
+	if (IS_ERR(kdev))
+		return ERR_CAST(kdev);
+
+	drm = &kdev->base;
+	drm->mode_config.funcs = &drm_mode_config_funcs;
+
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return drm;
+}
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.h b/drivers/gpu/drm/tests/drm_kunit_helpers.h
new file mode 100644
index 000000000000..f13a18dd1c6d
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.h
@@ -0,0 +1,9 @@
+#ifndef DRM_KUNIT_HELPERS_H_
+#define DRM_KUNIT_HELPERS_H_
+
+struct drm_device;
+struct kunit;
+
+struct drm_device *drm_kunit_device_init(struct kunit *test, u32 features, char *name);
+
+#endif // DRM_KUNIT_HELPERS_H_

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 02/25] drm/tests: Add Kunit Helpers

[Maxime Ripard]

As the number of kunit tests in KMS grows further, we start to have
multiple test suites that, for example, need to register a mock DRM
driver to interact with the KMS function they are supposed to test.

Let's add a file meant to provide those kind of helpers to avoid
duplication.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- Changed the API a bit to pass the features as argument

Changes in v4:
- Simplified the DRM device cleanup patch using devm_drm_dev_alloc()
---
 drivers/gpu/drm/tests/Makefile            |  1 +
 drivers/gpu/drm/tests/drm_kunit_helpers.c | 64 +++++++++++++++++++++++++++++++
 drivers/gpu/drm/tests/drm_kunit_helpers.h |  9 +++++
 3 files changed, 74 insertions(+)

diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index 2d9f49b62ecb..b29ef1085cad 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_format_helper_test.o \
 	drm_format_test.o \
 	drm_framebuffer_test.o \
+	drm_kunit_helpers.o \
 	drm_mm_test.o \
 	drm_plane_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.c b/drivers/gpu/drm/tests/drm_kunit_helpers.c
new file mode 100644
index 000000000000..d3f0d681b685
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.c
@@ -0,0 +1,64 @@
+#include <drm/drm_drv.h>
+#include <drm/drm_managed.h>
+
+#include <kunit/resource.h>
+
+#include <linux/device.h>
+
+struct kunit_dev {
+	struct drm_device base;
+};
+
+static const struct drm_mode_config_funcs drm_mode_config_funcs = {
+};
+
+static int dev_init(struct kunit_resource *res, void *ptr)
+{
+	char *name = ptr;
+	struct device *dev;
+
+	dev = root_device_register(name);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	res->data = dev;
+	return 0;
+}
+
+static void dev_free(struct kunit_resource *res)
+{
+	struct device *dev = res->data;
+
+	root_device_unregister(dev);
+}
+
+struct drm_device *drm_kunit_device_init(struct kunit *test, u32 features, char *name)
+{
+	struct kunit_dev *kdev;
+	struct drm_device *drm;
+	struct drm_driver *driver;
+	struct device *dev;
+	int ret;
+
+	dev = kunit_alloc_resource(test, dev_init, dev_free, GFP_KERNEL, name);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	driver = kunit_kzalloc(test, sizeof(*driver), GFP_KERNEL);
+	if (!driver)
+		return ERR_PTR(-ENOMEM);
+
+	driver->driver_features = features;
+	kdev = devm_drm_dev_alloc(dev, driver, struct kunit_dev, base);
+	if (IS_ERR(kdev))
+		return ERR_CAST(kdev);
+
+	drm = &kdev->base;
+	drm->mode_config.funcs = &drm_mode_config_funcs;
+
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return drm;
+}
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.h b/drivers/gpu/drm/tests/drm_kunit_helpers.h
new file mode 100644
index 000000000000..f13a18dd1c6d
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.h
@@ -0,0 +1,9 @@
+#ifndef DRM_KUNIT_HELPERS_H_
+#define DRM_KUNIT_HELPERS_H_
+
+struct drm_device;
+struct kunit;
+
+struct drm_device *drm_kunit_device_init(struct kunit *test, u32 features, char *name);
+
+#endif // DRM_KUNIT_HELPERS_H_

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 03/25] drm/connector: Rename legacy TV property

[Maxime Ripard]

The current tv_mode has driver-specific values that don't allow to
easily share code using it, either at the userspace or kernel level.

Since we're going to introduce a new, generic, property that fit the
same purpose, let's rename this one to legacy_tv_mode to make it
obvious we should move away from it.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_atomic_uapi.c         | 8 ++++----
 drivers/gpu/drm/drm_connector.c           | 6 +++---
 drivers/gpu/drm/gud/gud_connector.c       | 6 +++---
 drivers/gpu/drm/i2c/ch7006_drv.c          | 4 ++--
 drivers/gpu/drm/i915/display/intel_tv.c   | 2 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 4 ++--
 drivers/gpu/drm/vc4/vc4_vec.c             | 8 ++++----
 include/drm/drm_connector.h               | 4 ++--
 include/drm/drm_mode_config.h             | 6 ++++--
 9 files changed, 25 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index c06d0639d552..7f2b9a07fbdf 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -698,8 +698,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
 		state->tv.margins.top = val;
 	} else if (property == config->tv_bottom_margin_property) {
 		state->tv.margins.bottom = val;
-	} else if (property == config->tv_mode_property) {
-		state->tv.mode = val;
+	} else if (property == config->legacy_tv_mode_property) {
+		state->tv.legacy_mode = val;
 	} else if (property == config->tv_brightness_property) {
 		state->tv.brightness = val;
 	} else if (property == config->tv_contrast_property) {
@@ -808,8 +808,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
 		*val = state->tv.margins.top;
 	} else if (property == config->tv_bottom_margin_property) {
 		*val = state->tv.margins.bottom;
-	} else if (property == config->tv_mode_property) {
-		*val = state->tv.mode;
+	} else if (property == config->legacy_tv_mode_property) {
+		*val = state->tv.legacy_mode;
 	} else if (property == config->tv_brightness_property) {
 		*val = state->tv.brightness;
 	} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 547356e00341..05edff79d312 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1690,14 +1690,14 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-	dev->mode_config.tv_mode_property =
+	dev->mode_config.legacy_tv_mode_property =
 		drm_property_create(dev, DRM_MODE_PROP_ENUM,
 				    "mode", num_modes);
-	if (!dev->mode_config.tv_mode_property)
+	if (!dev->mode_config.legacy_tv_mode_property)
 		goto nomem;
 
 	for (i = 0; i < num_modes; i++)
-		drm_property_add_enum(dev->mode_config.tv_mode_property,
+		drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
 				      i, modes[i]);
 
 	dev->mode_config.tv_brightness_property =
diff --git a/drivers/gpu/drm/gud/gud_connector.c b/drivers/gpu/drm/gud/gud_connector.c
index fa636206f232..86e992b2108b 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -303,7 +303,7 @@ static int gud_connector_atomic_check(struct drm_connector *connector,
 	    old_state->tv.margins.right != new_state->tv.margins.right ||
 	    old_state->tv.margins.top != new_state->tv.margins.top ||
 	    old_state->tv.margins.bottom != new_state->tv.margins.bottom ||
-	    old_state->tv.mode != new_state->tv.mode ||
+	    old_state->tv.legacy_mode != new_state->tv.legacy_mode ||
 	    old_state->tv.brightness != new_state->tv.brightness ||
 	    old_state->tv.contrast != new_state->tv.contrast ||
 	    old_state->tv.flicker_reduction != new_state->tv.flicker_reduction ||
@@ -424,7 +424,7 @@ gud_connector_property_lookup(struct drm_connector *connector, u16 prop)
 	case GUD_PROPERTY_TV_BOTTOM_MARGIN:
 		return config->tv_bottom_margin_property;
 	case GUD_PROPERTY_TV_MODE:
-		return config->tv_mode_property;
+		return config->legacy_tv_mode_property;
 	case GUD_PROPERTY_TV_BRIGHTNESS:
 		return config->tv_brightness_property;
 	case GUD_PROPERTY_TV_CONTRAST:
@@ -454,7 +454,7 @@ static unsigned int *gud_connector_tv_state_val(u16 prop, struct drm_tv_connecto
 	case GUD_PROPERTY_TV_BOTTOM_MARGIN:
 		return &state->margins.bottom;
 	case GUD_PROPERTY_TV_MODE:
-		return &state->mode;
+		return &state->legacy_mode;
 	case GUD_PROPERTY_TV_BRIGHTNESS:
 		return &state->brightness;
 	case GUD_PROPERTY_TV_CONTRAST:
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index 578b738859b9..ef69f9bdeace 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -264,7 +264,7 @@ static int ch7006_encoder_create_resources(struct drm_encoder *encoder,
 				      priv->hmargin);
 	drm_object_attach_property(&connector->base, conf->tv_bottom_margin_property,
 				      priv->vmargin);
-	drm_object_attach_property(&connector->base, conf->tv_mode_property,
+	drm_object_attach_property(&connector->base, conf->legacy_tv_mode_property,
 				      priv->norm);
 	drm_object_attach_property(&connector->base, conf->tv_brightness_property,
 				      priv->brightness);
@@ -315,7 +315,7 @@ static int ch7006_encoder_set_property(struct drm_encoder *encoder,
 		ch7006_load_reg(client, state, CH7006_POV);
 		ch7006_load_reg(client, state, CH7006_VPOS);
 
-	} else if (property == conf->tv_mode_property) {
+	} else if (property == conf->legacy_tv_mode_property) {
 		if (connector->dpms != DRM_MODE_DPMS_OFF)
 			return -EINVAL;
 
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c
index cf7d5c1ab406..95b021da5a11 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1906,7 +1906,7 @@ static void intel_tv_add_properties(struct drm_connector *connector)
 	drm_mode_create_tv_properties(&i915->drm, i, tv_format_names);
 
 	drm_object_attach_property(&connector->base,
-				   i915->drm.mode_config.tv_mode_property,
+				   i915->drm.mode_config.legacy_tv_mode_property,
 				   conn_state->tv.mode);
 	drm_object_attach_property(&connector->base,
 				   i915->drm.mode_config.tv_left_margin_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index be28e7bd7490..1a15534adc60 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -662,7 +662,7 @@ static int nv17_tv_create_resources(struct drm_encoder *encoder,
 					conf->tv_subconnector_property,
 					tv_enc->subconnector);
 	drm_object_attach_property(&connector->base,
-					conf->tv_mode_property,
+					conf->legacy_tv_mode_property,
 					tv_enc->tv_norm);
 	drm_object_attach_property(&connector->base,
 					conf->tv_flicker_reduction_property,
@@ -722,7 +722,7 @@ static int nv17_tv_set_property(struct drm_encoder *encoder,
 		if (encoder->crtc)
 			nv17_tv_update_rescaler(encoder);
 
-	} else if (property == conf->tv_mode_property) {
+	} else if (property == conf->legacy_tv_mode_property) {
 		if (connector->dpms != DRM_MODE_DPMS_OFF)
 			return -EINVAL;
 
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 92c07e31d632..e6043cf5d40e 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -274,7 +274,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 	struct drm_display_mode *mode;
 
 	mode = drm_mode_duplicate(connector->dev,
-				  vc4_vec_tv_modes[state->tv.mode].mode);
+				  vc4_vec_tv_modes[state->tv.legacy_mode].mode);
 	if (!mode) {
 		DRM_ERROR("Failed to create a new display mode\n");
 		return -ENOMEM;
@@ -312,7 +312,7 @@ static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 	drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
 
 	drm_object_attach_property(&connector->base,
-				   dev->mode_config.tv_mode_property,
+				   dev->mode_config.legacy_tv_mode_property,
 				   VC4_VEC_TV_MODE_NTSC);
 
 	drm_connector_attach_encoder(connector, &vec->encoder.base);
@@ -361,7 +361,7 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
 	const struct vc4_vec_tv_mode *tv_mode =
-		&vc4_vec_tv_modes[conn_state->tv.mode];
+		&vc4_vec_tv_modes[conn_state->tv.legacy_mode];
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
@@ -449,7 +449,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 {
 	const struct vc4_vec_tv_mode *vec_mode;
 
-	vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode];
+	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
 
 	if (conn_state->crtc &&
 	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index e641a4725f99..f18c2ba113d7 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -695,7 +695,7 @@ struct drm_connector_tv_margins {
  * @select_subconnector: selected subconnector
  * @subconnector: detected subconnector
  * @margins: TV margins
- * @mode: TV mode
+ * @legacy_mode: Legacy TV mode, driver specific value
  * @brightness: brightness in percent
  * @contrast: contrast in percent
  * @flicker_reduction: flicker reduction in percent
@@ -707,7 +707,7 @@ struct drm_tv_connector_state {
 	enum drm_mode_subconnector select_subconnector;
 	enum drm_mode_subconnector subconnector;
 	struct drm_connector_tv_margins margins;
-	unsigned int mode;
+	unsigned int legacy_mode;
 	unsigned int brightness;
 	unsigned int contrast;
 	unsigned int flicker_reduction;
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 5362702fffe1..c47b29e80108 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -712,11 +712,13 @@ struct drm_mode_config {
 	 * between different TV connector types.
 	 */
 	struct drm_property *tv_select_subconnector_property;
+
 	/**
-	 * @tv_mode_property: Optional TV property to select
+	 * @legacy_tv_mode_property: Optional TV property to select
 	 * the output TV mode.
 	 */
-	struct drm_property *tv_mode_property;
+	struct drm_property *legacy_tv_mode_property;
+
 	/**
 	 * @tv_left_margin_property: Optional TV property to set the left
 	 * margin (expressed in pixels).

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 03/25] drm/connector: Rename legacy TV property

[Maxime Ripard]

The current tv_mode has driver-specific values that don't allow to
easily share code using it, either at the userspace or kernel level.

Since we're going to introduce a new, generic, property that fit the
same purpose, let's rename this one to legacy_tv_mode to make it
obvious we should move away from it.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_atomic_uapi.c         | 8 ++++----
 drivers/gpu/drm/drm_connector.c           | 6 +++---
 drivers/gpu/drm/gud/gud_connector.c       | 6 +++---
 drivers/gpu/drm/i2c/ch7006_drv.c          | 4 ++--
 drivers/gpu/drm/i915/display/intel_tv.c   | 2 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 4 ++--
 drivers/gpu/drm/vc4/vc4_vec.c             | 8 ++++----
 include/drm/drm_connector.h               | 4 ++--
 include/drm/drm_mode_config.h             | 6 ++++--
 9 files changed, 25 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index c06d0639d552..7f2b9a07fbdf 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -698,8 +698,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
 		state->tv.margins.top = val;
 	} else if (property == config->tv_bottom_margin_property) {
 		state->tv.margins.bottom = val;
-	} else if (property == config->tv_mode_property) {
-		state->tv.mode = val;
+	} else if (property == config->legacy_tv_mode_property) {
+		state->tv.legacy_mode = val;
 	} else if (property == config->tv_brightness_property) {
 		state->tv.brightness = val;
 	} else if (property == config->tv_contrast_property) {
@@ -808,8 +808,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
 		*val = state->tv.margins.top;
 	} else if (property == config->tv_bottom_margin_property) {
 		*val = state->tv.margins.bottom;
-	} else if (property == config->tv_mode_property) {
-		*val = state->tv.mode;
+	} else if (property == config->legacy_tv_mode_property) {
+		*val = state->tv.legacy_mode;
 	} else if (property == config->tv_brightness_property) {
 		*val = state->tv.brightness;
 	} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 547356e00341..05edff79d312 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1690,14 +1690,14 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-	dev->mode_config.tv_mode_property =
+	dev->mode_config.legacy_tv_mode_property =
 		drm_property_create(dev, DRM_MODE_PROP_ENUM,
 				    "mode", num_modes);
-	if (!dev->mode_config.tv_mode_property)
+	if (!dev->mode_config.legacy_tv_mode_property)
 		goto nomem;
 
 	for (i = 0; i < num_modes; i++)
-		drm_property_add_enum(dev->mode_config.tv_mode_property,
+		drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
 				      i, modes[i]);
 
 	dev->mode_config.tv_brightness_property =
diff --git a/drivers/gpu/drm/gud/gud_connector.c b/drivers/gpu/drm/gud/gud_connector.c
index fa636206f232..86e992b2108b 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -303,7 +303,7 @@ static int gud_connector_atomic_check(struct drm_connector *connector,
 	    old_state->tv.margins.right != new_state->tv.margins.right ||
 	    old_state->tv.margins.top != new_state->tv.margins.top ||
 	    old_state->tv.margins.bottom != new_state->tv.margins.bottom ||
-	    old_state->tv.mode != new_state->tv.mode ||
+	    old_state->tv.legacy_mode != new_state->tv.legacy_mode ||
 	    old_state->tv.brightness != new_state->tv.brightness ||
 	    old_state->tv.contrast != new_state->tv.contrast ||
 	    old_state->tv.flicker_reduction != new_state->tv.flicker_reduction ||
@@ -424,7 +424,7 @@ gud_connector_property_lookup(struct drm_connector *connector, u16 prop)
 	case GUD_PROPERTY_TV_BOTTOM_MARGIN:
 		return config->tv_bottom_margin_property;
 	case GUD_PROPERTY_TV_MODE:
-		return config->tv_mode_property;
+		return config->legacy_tv_mode_property;
 	case GUD_PROPERTY_TV_BRIGHTNESS:
 		return config->tv_brightness_property;
 	case GUD_PROPERTY_TV_CONTRAST:
@@ -454,7 +454,7 @@ static unsigned int *gud_connector_tv_state_val(u16 prop, struct drm_tv_connecto
 	case GUD_PROPERTY_TV_BOTTOM_MARGIN:
 		return &state->margins.bottom;
 	case GUD_PROPERTY_TV_MODE:
-		return &state->mode;
+		return &state->legacy_mode;
 	case GUD_PROPERTY_TV_BRIGHTNESS:
 		return &state->brightness;
 	case GUD_PROPERTY_TV_CONTRAST:
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index 578b738859b9..ef69f9bdeace 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -264,7 +264,7 @@ static int ch7006_encoder_create_resources(struct drm_encoder *encoder,
 				      priv->hmargin);
 	drm_object_attach_property(&connector->base, conf->tv_bottom_margin_property,
 				      priv->vmargin);
-	drm_object_attach_property(&connector->base, conf->tv_mode_property,
+	drm_object_attach_property(&connector->base, conf->legacy_tv_mode_property,
 				      priv->norm);
 	drm_object_attach_property(&connector->base, conf->tv_brightness_property,
 				      priv->brightness);
@@ -315,7 +315,7 @@ static int ch7006_encoder_set_property(struct drm_encoder *encoder,
 		ch7006_load_reg(client, state, CH7006_POV);
 		ch7006_load_reg(client, state, CH7006_VPOS);
 
-	} else if (property == conf->tv_mode_property) {
+	} else if (property == conf->legacy_tv_mode_property) {
 		if (connector->dpms != DRM_MODE_DPMS_OFF)
 			return -EINVAL;
 
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c
index cf7d5c1ab406..95b021da5a11 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1906,7 +1906,7 @@ static void intel_tv_add_properties(struct drm_connector *connector)
 	drm_mode_create_tv_properties(&i915->drm, i, tv_format_names);
 
 	drm_object_attach_property(&connector->base,
-				   i915->drm.mode_config.tv_mode_property,
+				   i915->drm.mode_config.legacy_tv_mode_property,
 				   conn_state->tv.mode);
 	drm_object_attach_property(&connector->base,
 				   i915->drm.mode_config.tv_left_margin_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index be28e7bd7490..1a15534adc60 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -662,7 +662,7 @@ static int nv17_tv_create_resources(struct drm_encoder *encoder,
 					conf->tv_subconnector_property,
 					tv_enc->subconnector);
 	drm_object_attach_property(&connector->base,
-					conf->tv_mode_property,
+					conf->legacy_tv_mode_property,
 					tv_enc->tv_norm);
 	drm_object_attach_property(&connector->base,
 					conf->tv_flicker_reduction_property,
@@ -722,7 +722,7 @@ static int nv17_tv_set_property(struct drm_encoder *encoder,
 		if (encoder->crtc)
 			nv17_tv_update_rescaler(encoder);
 
-	} else if (property == conf->tv_mode_property) {
+	} else if (property == conf->legacy_tv_mode_property) {
 		if (connector->dpms != DRM_MODE_DPMS_OFF)
 			return -EINVAL;
 
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 92c07e31d632..e6043cf5d40e 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -274,7 +274,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 	struct drm_display_mode *mode;
 
 	mode = drm_mode_duplicate(connector->dev,
-				  vc4_vec_tv_modes[state->tv.mode].mode);
+				  vc4_vec_tv_modes[state->tv.legacy_mode].mode);
 	if (!mode) {
 		DRM_ERROR("Failed to create a new display mode\n");
 		return -ENOMEM;
@@ -312,7 +312,7 @@ static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 	drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
 
 	drm_object_attach_property(&connector->base,
-				   dev->mode_config.tv_mode_property,
+				   dev->mode_config.legacy_tv_mode_property,
 				   VC4_VEC_TV_MODE_NTSC);
 
 	drm_connector_attach_encoder(connector, &vec->encoder.base);
@@ -361,7 +361,7 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
 	const struct vc4_vec_tv_mode *tv_mode =
-		&vc4_vec_tv_modes[conn_state->tv.mode];
+		&vc4_vec_tv_modes[conn_state->tv.legacy_mode];
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
@@ -449,7 +449,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 {
 	const struct vc4_vec_tv_mode *vec_mode;
 
-	vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode];
+	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
 
 	if (conn_state->crtc &&
 	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index e641a4725f99..f18c2ba113d7 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -695,7 +695,7 @@ struct drm_connector_tv_margins {
  * @select_subconnector: selected subconnector
  * @subconnector: detected subconnector
  * @margins: TV margins
- * @mode: TV mode
+ * @legacy_mode: Legacy TV mode, driver specific value
  * @brightness: brightness in percent
  * @contrast: contrast in percent
  * @flicker_reduction: flicker reduction in percent
@@ -707,7 +707,7 @@ struct drm_tv_connector_state {
 	enum drm_mode_subconnector select_subconnector;
 	enum drm_mode_subconnector subconnector;
 	struct drm_connector_tv_margins margins;
-	unsigned int mode;
+	unsigned int legacy_mode;
 	unsigned int brightness;
 	unsigned int contrast;
 	unsigned int flicker_reduction;
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 5362702fffe1..c47b29e80108 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -712,11 +712,13 @@ struct drm_mode_config {
 	 * between different TV connector types.
 	 */
 	struct drm_property *tv_select_subconnector_property;
+
 	/**
-	 * @tv_mode_property: Optional TV property to select
+	 * @legacy_tv_mode_property: Optional TV property to select
 	 * the output TV mode.
 	 */
-	struct drm_property *tv_mode_property;
+	struct drm_property *legacy_tv_mode_property;
+
 	/**
 	 * @tv_left_margin_property: Optional TV property to set the left
 	 * margin (expressed in pixels).

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 03/25] drm/connector: Rename legacy TV property

[Maxime Ripard]

The current tv_mode has driver-specific values that don't allow to
easily share code using it, either at the userspace or kernel level.

Since we're going to introduce a new, generic, property that fit the
same purpose, let's rename this one to legacy_tv_mode to make it
obvious we should move away from it.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_atomic_uapi.c         | 8 ++++----
 drivers/gpu/drm/drm_connector.c           | 6 +++---
 drivers/gpu/drm/gud/gud_connector.c       | 6 +++---
 drivers/gpu/drm/i2c/ch7006_drv.c          | 4 ++--
 drivers/gpu/drm/i915/display/intel_tv.c   | 2 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 4 ++--
 drivers/gpu/drm/vc4/vc4_vec.c             | 8 ++++----
 include/drm/drm_connector.h               | 4 ++--
 include/drm/drm_mode_config.h             | 6 ++++--
 9 files changed, 25 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index c06d0639d552..7f2b9a07fbdf 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -698,8 +698,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
 		state->tv.margins.top = val;
 	} else if (property == config->tv_bottom_margin_property) {
 		state->tv.margins.bottom = val;
-	} else if (property == config->tv_mode_property) {
-		state->tv.mode = val;
+	} else if (property == config->legacy_tv_mode_property) {
+		state->tv.legacy_mode = val;
 	} else if (property == config->tv_brightness_property) {
 		state->tv.brightness = val;
 	} else if (property == config->tv_contrast_property) {
@@ -808,8 +808,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
 		*val = state->tv.margins.top;
 	} else if (property == config->tv_bottom_margin_property) {
 		*val = state->tv.margins.bottom;
-	} else if (property == config->tv_mode_property) {
-		*val = state->tv.mode;
+	} else if (property == config->legacy_tv_mode_property) {
+		*val = state->tv.legacy_mode;
 	} else if (property == config->tv_brightness_property) {
 		*val = state->tv.brightness;
 	} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 547356e00341..05edff79d312 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1690,14 +1690,14 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-	dev->mode_config.tv_mode_property =
+	dev->mode_config.legacy_tv_mode_property =
 		drm_property_create(dev, DRM_MODE_PROP_ENUM,
 				    "mode", num_modes);
-	if (!dev->mode_config.tv_mode_property)
+	if (!dev->mode_config.legacy_tv_mode_property)
 		goto nomem;
 
 	for (i = 0; i < num_modes; i++)
-		drm_property_add_enum(dev->mode_config.tv_mode_property,
+		drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
 				      i, modes[i]);
 
 	dev->mode_config.tv_brightness_property =
diff --git a/drivers/gpu/drm/gud/gud_connector.c b/drivers/gpu/drm/gud/gud_connector.c
index fa636206f232..86e992b2108b 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -303,7 +303,7 @@ static int gud_connector_atomic_check(struct drm_connector *connector,
 	    old_state->tv.margins.right != new_state->tv.margins.right ||
 	    old_state->tv.margins.top != new_state->tv.margins.top ||
 	    old_state->tv.margins.bottom != new_state->tv.margins.bottom ||
-	    old_state->tv.mode != new_state->tv.mode ||
+	    old_state->tv.legacy_mode != new_state->tv.legacy_mode ||
 	    old_state->tv.brightness != new_state->tv.brightness ||
 	    old_state->tv.contrast != new_state->tv.contrast ||
 	    old_state->tv.flicker_reduction != new_state->tv.flicker_reduction ||
@@ -424,7 +424,7 @@ gud_connector_property_lookup(struct drm_connector *connector, u16 prop)
 	case GUD_PROPERTY_TV_BOTTOM_MARGIN:
 		return config->tv_bottom_margin_property;
 	case GUD_PROPERTY_TV_MODE:
-		return config->tv_mode_property;
+		return config->legacy_tv_mode_property;
 	case GUD_PROPERTY_TV_BRIGHTNESS:
 		return config->tv_brightness_property;
 	case GUD_PROPERTY_TV_CONTRAST:
@@ -454,7 +454,7 @@ static unsigned int *gud_connector_tv_state_val(u16 prop, struct drm_tv_connecto
 	case GUD_PROPERTY_TV_BOTTOM_MARGIN:
 		return &state->margins.bottom;
 	case GUD_PROPERTY_TV_MODE:
-		return &state->mode;
+		return &state->legacy_mode;
 	case GUD_PROPERTY_TV_BRIGHTNESS:
 		return &state->brightness;
 	case GUD_PROPERTY_TV_CONTRAST:
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index 578b738859b9..ef69f9bdeace 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -264,7 +264,7 @@ static int ch7006_encoder_create_resources(struct drm_encoder *encoder,
 				      priv->hmargin);
 	drm_object_attach_property(&connector->base, conf->tv_bottom_margin_property,
 				      priv->vmargin);
-	drm_object_attach_property(&connector->base, conf->tv_mode_property,
+	drm_object_attach_property(&connector->base, conf->legacy_tv_mode_property,
 				      priv->norm);
 	drm_object_attach_property(&connector->base, conf->tv_brightness_property,
 				      priv->brightness);
@@ -315,7 +315,7 @@ static int ch7006_encoder_set_property(struct drm_encoder *encoder,
 		ch7006_load_reg(client, state, CH7006_POV);
 		ch7006_load_reg(client, state, CH7006_VPOS);
 
-	} else if (property == conf->tv_mode_property) {
+	} else if (property == conf->legacy_tv_mode_property) {
 		if (connector->dpms != DRM_MODE_DPMS_OFF)
 			return -EINVAL;
 
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c
index cf7d5c1ab406..95b021da5a11 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1906,7 +1906,7 @@ static void intel_tv_add_properties(struct drm_connector *connector)
 	drm_mode_create_tv_properties(&i915->drm, i, tv_format_names);
 
 	drm_object_attach_property(&connector->base,
-				   i915->drm.mode_config.tv_mode_property,
+				   i915->drm.mode_config.legacy_tv_mode_property,
 				   conn_state->tv.mode);
 	drm_object_attach_property(&connector->base,
 				   i915->drm.mode_config.tv_left_margin_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index be28e7bd7490..1a15534adc60 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -662,7 +662,7 @@ static int nv17_tv_create_resources(struct drm_encoder *encoder,
 					conf->tv_subconnector_property,
 					tv_enc->subconnector);
 	drm_object_attach_property(&connector->base,
-					conf->tv_mode_property,
+					conf->legacy_tv_mode_property,
 					tv_enc->tv_norm);
 	drm_object_attach_property(&connector->base,
 					conf->tv_flicker_reduction_property,
@@ -722,7 +722,7 @@ static int nv17_tv_set_property(struct drm_encoder *encoder,
 		if (encoder->crtc)
 			nv17_tv_update_rescaler(encoder);
 
-	} else if (property == conf->tv_mode_property) {
+	} else if (property == conf->legacy_tv_mode_property) {
 		if (connector->dpms != DRM_MODE_DPMS_OFF)
 			return -EINVAL;
 
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 92c07e31d632..e6043cf5d40e 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -274,7 +274,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 	struct drm_display_mode *mode;
 
 	mode = drm_mode_duplicate(connector->dev,
-				  vc4_vec_tv_modes[state->tv.mode].mode);
+				  vc4_vec_tv_modes[state->tv.legacy_mode].mode);
 	if (!mode) {
 		DRM_ERROR("Failed to create a new display mode\n");
 		return -ENOMEM;
@@ -312,7 +312,7 @@ static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 	drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
 
 	drm_object_attach_property(&connector->base,
-				   dev->mode_config.tv_mode_property,
+				   dev->mode_config.legacy_tv_mode_property,
 				   VC4_VEC_TV_MODE_NTSC);
 
 	drm_connector_attach_encoder(connector, &vec->encoder.base);
@@ -361,7 +361,7 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
 	const struct vc4_vec_tv_mode *tv_mode =
-		&vc4_vec_tv_modes[conn_state->tv.mode];
+		&vc4_vec_tv_modes[conn_state->tv.legacy_mode];
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
@@ -449,7 +449,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 {
 	const struct vc4_vec_tv_mode *vec_mode;
 
-	vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode];
+	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
 
 	if (conn_state->crtc &&
 	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index e641a4725f99..f18c2ba113d7 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -695,7 +695,7 @@ struct drm_connector_tv_margins {
  * @select_subconnector: selected subconnector
  * @subconnector: detected subconnector
  * @margins: TV margins
- * @mode: TV mode
+ * @legacy_mode: Legacy TV mode, driver specific value
  * @brightness: brightness in percent
  * @contrast: contrast in percent
  * @flicker_reduction: flicker reduction in percent
@@ -707,7 +707,7 @@ struct drm_tv_connector_state {
 	enum drm_mode_subconnector select_subconnector;
 	enum drm_mode_subconnector subconnector;
 	struct drm_connector_tv_margins margins;
-	unsigned int mode;
+	unsigned int legacy_mode;
 	unsigned int brightness;
 	unsigned int contrast;
 	unsigned int flicker_reduction;
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 5362702fffe1..c47b29e80108 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -712,11 +712,13 @@ struct drm_mode_config {
 	 * between different TV connector types.
 	 */
 	struct drm_property *tv_select_subconnector_property;
+
 	/**
-	 * @tv_mode_property: Optional TV property to select
+	 * @legacy_tv_mode_property: Optional TV property to select
 	 * the output TV mode.
 	 */
-	struct drm_property *tv_mode_property;
+	struct drm_property *legacy_tv_mode_property;
+
 	/**
 	 * @tv_left_margin_property: Optional TV property to set the left
 	 * margin (expressed in pixels).

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 03/25] drm/connector: Rename legacy TV property

[Maxime Ripard]

The current tv_mode has driver-specific values that don't allow to
easily share code using it, either at the userspace or kernel level.

Since we're going to introduce a new, generic, property that fit the
same purpose, let's rename this one to legacy_tv_mode to make it
obvious we should move away from it.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_atomic_uapi.c         | 8 ++++----
 drivers/gpu/drm/drm_connector.c           | 6 +++---
 drivers/gpu/drm/gud/gud_connector.c       | 6 +++---
 drivers/gpu/drm/i2c/ch7006_drv.c          | 4 ++--
 drivers/gpu/drm/i915/display/intel_tv.c   | 2 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 4 ++--
 drivers/gpu/drm/vc4/vc4_vec.c             | 8 ++++----
 include/drm/drm_connector.h               | 4 ++--
 include/drm/drm_mode_config.h             | 6 ++++--
 9 files changed, 25 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index c06d0639d552..7f2b9a07fbdf 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -698,8 +698,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
 		state->tv.margins.top = val;
 	} else if (property == config->tv_bottom_margin_property) {
 		state->tv.margins.bottom = val;
-	} else if (property == config->tv_mode_property) {
-		state->tv.mode = val;
+	} else if (property == config->legacy_tv_mode_property) {
+		state->tv.legacy_mode = val;
 	} else if (property == config->tv_brightness_property) {
 		state->tv.brightness = val;
 	} else if (property == config->tv_contrast_property) {
@@ -808,8 +808,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
 		*val = state->tv.margins.top;
 	} else if (property == config->tv_bottom_margin_property) {
 		*val = state->tv.margins.bottom;
-	} else if (property == config->tv_mode_property) {
-		*val = state->tv.mode;
+	} else if (property == config->legacy_tv_mode_property) {
+		*val = state->tv.legacy_mode;
 	} else if (property == config->tv_brightness_property) {
 		*val = state->tv.brightness;
 	} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 547356e00341..05edff79d312 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1690,14 +1690,14 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-	dev->mode_config.tv_mode_property =
+	dev->mode_config.legacy_tv_mode_property =
 		drm_property_create(dev, DRM_MODE_PROP_ENUM,
 				    "mode", num_modes);
-	if (!dev->mode_config.tv_mode_property)
+	if (!dev->mode_config.legacy_tv_mode_property)
 		goto nomem;
 
 	for (i = 0; i < num_modes; i++)
-		drm_property_add_enum(dev->mode_config.tv_mode_property,
+		drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
 				      i, modes[i]);
 
 	dev->mode_config.tv_brightness_property =
diff --git a/drivers/gpu/drm/gud/gud_connector.c b/drivers/gpu/drm/gud/gud_connector.c
index fa636206f232..86e992b2108b 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -303,7 +303,7 @@ static int gud_connector_atomic_check(struct drm_connector *connector,
 	    old_state->tv.margins.right != new_state->tv.margins.right ||
 	    old_state->tv.margins.top != new_state->tv.margins.top ||
 	    old_state->tv.margins.bottom != new_state->tv.margins.bottom ||
-	    old_state->tv.mode != new_state->tv.mode ||
+	    old_state->tv.legacy_mode != new_state->tv.legacy_mode ||
 	    old_state->tv.brightness != new_state->tv.brightness ||
 	    old_state->tv.contrast != new_state->tv.contrast ||
 	    old_state->tv.flicker_reduction != new_state->tv.flicker_reduction ||
@@ -424,7 +424,7 @@ gud_connector_property_lookup(struct drm_connector *connector, u16 prop)
 	case GUD_PROPERTY_TV_BOTTOM_MARGIN:
 		return config->tv_bottom_margin_property;
 	case GUD_PROPERTY_TV_MODE:
-		return config->tv_mode_property;
+		return config->legacy_tv_mode_property;
 	case GUD_PROPERTY_TV_BRIGHTNESS:
 		return config->tv_brightness_property;
 	case GUD_PROPERTY_TV_CONTRAST:
@@ -454,7 +454,7 @@ static unsigned int *gud_connector_tv_state_val(u16 prop, struct drm_tv_connecto
 	case GUD_PROPERTY_TV_BOTTOM_MARGIN:
 		return &state->margins.bottom;
 	case GUD_PROPERTY_TV_MODE:
-		return &state->mode;
+		return &state->legacy_mode;
 	case GUD_PROPERTY_TV_BRIGHTNESS:
 		return &state->brightness;
 	case GUD_PROPERTY_TV_CONTRAST:
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index 578b738859b9..ef69f9bdeace 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -264,7 +264,7 @@ static int ch7006_encoder_create_resources(struct drm_encoder *encoder,
 				      priv->hmargin);
 	drm_object_attach_property(&connector->base, conf->tv_bottom_margin_property,
 				      priv->vmargin);
-	drm_object_attach_property(&connector->base, conf->tv_mode_property,
+	drm_object_attach_property(&connector->base, conf->legacy_tv_mode_property,
 				      priv->norm);
 	drm_object_attach_property(&connector->base, conf->tv_brightness_property,
 				      priv->brightness);
@@ -315,7 +315,7 @@ static int ch7006_encoder_set_property(struct drm_encoder *encoder,
 		ch7006_load_reg(client, state, CH7006_POV);
 		ch7006_load_reg(client, state, CH7006_VPOS);
 
-	} else if (property == conf->tv_mode_property) {
+	} else if (property == conf->legacy_tv_mode_property) {
 		if (connector->dpms != DRM_MODE_DPMS_OFF)
 			return -EINVAL;
 
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c
index cf7d5c1ab406..95b021da5a11 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1906,7 +1906,7 @@ static void intel_tv_add_properties(struct drm_connector *connector)
 	drm_mode_create_tv_properties(&i915->drm, i, tv_format_names);
 
 	drm_object_attach_property(&connector->base,
-				   i915->drm.mode_config.tv_mode_property,
+				   i915->drm.mode_config.legacy_tv_mode_property,
 				   conn_state->tv.mode);
 	drm_object_attach_property(&connector->base,
 				   i915->drm.mode_config.tv_left_margin_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index be28e7bd7490..1a15534adc60 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -662,7 +662,7 @@ static int nv17_tv_create_resources(struct drm_encoder *encoder,
 					conf->tv_subconnector_property,
 					tv_enc->subconnector);
 	drm_object_attach_property(&connector->base,
-					conf->tv_mode_property,
+					conf->legacy_tv_mode_property,
 					tv_enc->tv_norm);
 	drm_object_attach_property(&connector->base,
 					conf->tv_flicker_reduction_property,
@@ -722,7 +722,7 @@ static int nv17_tv_set_property(struct drm_encoder *encoder,
 		if (encoder->crtc)
 			nv17_tv_update_rescaler(encoder);
 
-	} else if (property == conf->tv_mode_property) {
+	} else if (property == conf->legacy_tv_mode_property) {
 		if (connector->dpms != DRM_MODE_DPMS_OFF)
 			return -EINVAL;
 
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 92c07e31d632..e6043cf5d40e 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -274,7 +274,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 	struct drm_display_mode *mode;
 
 	mode = drm_mode_duplicate(connector->dev,
-				  vc4_vec_tv_modes[state->tv.mode].mode);
+				  vc4_vec_tv_modes[state->tv.legacy_mode].mode);
 	if (!mode) {
 		DRM_ERROR("Failed to create a new display mode\n");
 		return -ENOMEM;
@@ -312,7 +312,7 @@ static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 	drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
 
 	drm_object_attach_property(&connector->base,
-				   dev->mode_config.tv_mode_property,
+				   dev->mode_config.legacy_tv_mode_property,
 				   VC4_VEC_TV_MODE_NTSC);
 
 	drm_connector_attach_encoder(connector, &vec->encoder.base);
@@ -361,7 +361,7 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
 	const struct vc4_vec_tv_mode *tv_mode =
-		&vc4_vec_tv_modes[conn_state->tv.mode];
+		&vc4_vec_tv_modes[conn_state->tv.legacy_mode];
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
@@ -449,7 +449,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 {
 	const struct vc4_vec_tv_mode *vec_mode;
 
-	vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode];
+	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
 
 	if (conn_state->crtc &&
 	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index e641a4725f99..f18c2ba113d7 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -695,7 +695,7 @@ struct drm_connector_tv_margins {
  * @select_subconnector: selected subconnector
  * @subconnector: detected subconnector
  * @margins: TV margins
- * @mode: TV mode
+ * @legacy_mode: Legacy TV mode, driver specific value
  * @brightness: brightness in percent
  * @contrast: contrast in percent
  * @flicker_reduction: flicker reduction in percent
@@ -707,7 +707,7 @@ struct drm_tv_connector_state {
 	enum drm_mode_subconnector select_subconnector;
 	enum drm_mode_subconnector subconnector;
 	struct drm_connector_tv_margins margins;
-	unsigned int mode;
+	unsigned int legacy_mode;
 	unsigned int brightness;
 	unsigned int contrast;
 	unsigned int flicker_reduction;
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 5362702fffe1..c47b29e80108 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -712,11 +712,13 @@ struct drm_mode_config {
 	 * between different TV connector types.
 	 */
 	struct drm_property *tv_select_subconnector_property;
+
 	/**
-	 * @tv_mode_property: Optional TV property to select
+	 * @legacy_tv_mode_property: Optional TV property to select
 	 * the output TV mode.
 	 */
-	struct drm_property *tv_mode_property;
+	struct drm_property *legacy_tv_mode_property;
+
 	/**
 	 * @tv_left_margin_property: Optional TV property to set the left
 	 * margin (expressed in pixels).

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 03/25] drm/connector: Rename legacy TV property

[Maxime Ripard]

The current tv_mode has driver-specific values that don't allow to
easily share code using it, either at the userspace or kernel level.

Since we're going to introduce a new, generic, property that fit the
same purpose, let's rename this one to legacy_tv_mode to make it
obvious we should move away from it.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_atomic_uapi.c         | 8 ++++----
 drivers/gpu/drm/drm_connector.c           | 6 +++---
 drivers/gpu/drm/gud/gud_connector.c       | 6 +++---
 drivers/gpu/drm/i2c/ch7006_drv.c          | 4 ++--
 drivers/gpu/drm/i915/display/intel_tv.c   | 2 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 4 ++--
 drivers/gpu/drm/vc4/vc4_vec.c             | 8 ++++----
 include/drm/drm_connector.h               | 4 ++--
 include/drm/drm_mode_config.h             | 6 ++++--
 9 files changed, 25 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index c06d0639d552..7f2b9a07fbdf 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -698,8 +698,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
 		state->tv.margins.top = val;
 	} else if (property == config->tv_bottom_margin_property) {
 		state->tv.margins.bottom = val;
-	} else if (property == config->tv_mode_property) {
-		state->tv.mode = val;
+	} else if (property == config->legacy_tv_mode_property) {
+		state->tv.legacy_mode = val;
 	} else if (property == config->tv_brightness_property) {
 		state->tv.brightness = val;
 	} else if (property == config->tv_contrast_property) {
@@ -808,8 +808,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
 		*val = state->tv.margins.top;
 	} else if (property == config->tv_bottom_margin_property) {
 		*val = state->tv.margins.bottom;
-	} else if (property == config->tv_mode_property) {
-		*val = state->tv.mode;
+	} else if (property == config->legacy_tv_mode_property) {
+		*val = state->tv.legacy_mode;
 	} else if (property == config->tv_brightness_property) {
 		*val = state->tv.brightness;
 	} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 547356e00341..05edff79d312 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1690,14 +1690,14 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-	dev->mode_config.tv_mode_property =
+	dev->mode_config.legacy_tv_mode_property =
 		drm_property_create(dev, DRM_MODE_PROP_ENUM,
 				    "mode", num_modes);
-	if (!dev->mode_config.tv_mode_property)
+	if (!dev->mode_config.legacy_tv_mode_property)
 		goto nomem;
 
 	for (i = 0; i < num_modes; i++)
-		drm_property_add_enum(dev->mode_config.tv_mode_property,
+		drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
 				      i, modes[i]);
 
 	dev->mode_config.tv_brightness_property =
diff --git a/drivers/gpu/drm/gud/gud_connector.c b/drivers/gpu/drm/gud/gud_connector.c
index fa636206f232..86e992b2108b 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -303,7 +303,7 @@ static int gud_connector_atomic_check(struct drm_connector *connector,
 	    old_state->tv.margins.right != new_state->tv.margins.right ||
 	    old_state->tv.margins.top != new_state->tv.margins.top ||
 	    old_state->tv.margins.bottom != new_state->tv.margins.bottom ||
-	    old_state->tv.mode != new_state->tv.mode ||
+	    old_state->tv.legacy_mode != new_state->tv.legacy_mode ||
 	    old_state->tv.brightness != new_state->tv.brightness ||
 	    old_state->tv.contrast != new_state->tv.contrast ||
 	    old_state->tv.flicker_reduction != new_state->tv.flicker_reduction ||
@@ -424,7 +424,7 @@ gud_connector_property_lookup(struct drm_connector *connector, u16 prop)
 	case GUD_PROPERTY_TV_BOTTOM_MARGIN:
 		return config->tv_bottom_margin_property;
 	case GUD_PROPERTY_TV_MODE:
-		return config->tv_mode_property;
+		return config->legacy_tv_mode_property;
 	case GUD_PROPERTY_TV_BRIGHTNESS:
 		return config->tv_brightness_property;
 	case GUD_PROPERTY_TV_CONTRAST:
@@ -454,7 +454,7 @@ static unsigned int *gud_connector_tv_state_val(u16 prop, struct drm_tv_connecto
 	case GUD_PROPERTY_TV_BOTTOM_MARGIN:
 		return &state->margins.bottom;
 	case GUD_PROPERTY_TV_MODE:
-		return &state->mode;
+		return &state->legacy_mode;
 	case GUD_PROPERTY_TV_BRIGHTNESS:
 		return &state->brightness;
 	case GUD_PROPERTY_TV_CONTRAST:
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index 578b738859b9..ef69f9bdeace 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -264,7 +264,7 @@ static int ch7006_encoder_create_resources(struct drm_encoder *encoder,
 				      priv->hmargin);
 	drm_object_attach_property(&connector->base, conf->tv_bottom_margin_property,
 				      priv->vmargin);
-	drm_object_attach_property(&connector->base, conf->tv_mode_property,
+	drm_object_attach_property(&connector->base, conf->legacy_tv_mode_property,
 				      priv->norm);
 	drm_object_attach_property(&connector->base, conf->tv_brightness_property,
 				      priv->brightness);
@@ -315,7 +315,7 @@ static int ch7006_encoder_set_property(struct drm_encoder *encoder,
 		ch7006_load_reg(client, state, CH7006_POV);
 		ch7006_load_reg(client, state, CH7006_VPOS);
 
-	} else if (property == conf->tv_mode_property) {
+	} else if (property == conf->legacy_tv_mode_property) {
 		if (connector->dpms != DRM_MODE_DPMS_OFF)
 			return -EINVAL;
 
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c
index cf7d5c1ab406..95b021da5a11 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1906,7 +1906,7 @@ static void intel_tv_add_properties(struct drm_connector *connector)
 	drm_mode_create_tv_properties(&i915->drm, i, tv_format_names);
 
 	drm_object_attach_property(&connector->base,
-				   i915->drm.mode_config.tv_mode_property,
+				   i915->drm.mode_config.legacy_tv_mode_property,
 				   conn_state->tv.mode);
 	drm_object_attach_property(&connector->base,
 				   i915->drm.mode_config.tv_left_margin_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index be28e7bd7490..1a15534adc60 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -662,7 +662,7 @@ static int nv17_tv_create_resources(struct drm_encoder *encoder,
 					conf->tv_subconnector_property,
 					tv_enc->subconnector);
 	drm_object_attach_property(&connector->base,
-					conf->tv_mode_property,
+					conf->legacy_tv_mode_property,
 					tv_enc->tv_norm);
 	drm_object_attach_property(&connector->base,
 					conf->tv_flicker_reduction_property,
@@ -722,7 +722,7 @@ static int nv17_tv_set_property(struct drm_encoder *encoder,
 		if (encoder->crtc)
 			nv17_tv_update_rescaler(encoder);
 
-	} else if (property == conf->tv_mode_property) {
+	} else if (property == conf->legacy_tv_mode_property) {
 		if (connector->dpms != DRM_MODE_DPMS_OFF)
 			return -EINVAL;
 
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 92c07e31d632..e6043cf5d40e 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -274,7 +274,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 	struct drm_display_mode *mode;
 
 	mode = drm_mode_duplicate(connector->dev,
-				  vc4_vec_tv_modes[state->tv.mode].mode);
+				  vc4_vec_tv_modes[state->tv.legacy_mode].mode);
 	if (!mode) {
 		DRM_ERROR("Failed to create a new display mode\n");
 		return -ENOMEM;
@@ -312,7 +312,7 @@ static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 	drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
 
 	drm_object_attach_property(&connector->base,
-				   dev->mode_config.tv_mode_property,
+				   dev->mode_config.legacy_tv_mode_property,
 				   VC4_VEC_TV_MODE_NTSC);
 
 	drm_connector_attach_encoder(connector, &vec->encoder.base);
@@ -361,7 +361,7 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
 	const struct vc4_vec_tv_mode *tv_mode =
-		&vc4_vec_tv_modes[conn_state->tv.mode];
+		&vc4_vec_tv_modes[conn_state->tv.legacy_mode];
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
@@ -449,7 +449,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 {
 	const struct vc4_vec_tv_mode *vec_mode;
 
-	vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode];
+	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
 
 	if (conn_state->crtc &&
 	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index e641a4725f99..f18c2ba113d7 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -695,7 +695,7 @@ struct drm_connector_tv_margins {
  * @select_subconnector: selected subconnector
  * @subconnector: detected subconnector
  * @margins: TV margins
- * @mode: TV mode
+ * @legacy_mode: Legacy TV mode, driver specific value
  * @brightness: brightness in percent
  * @contrast: contrast in percent
  * @flicker_reduction: flicker reduction in percent
@@ -707,7 +707,7 @@ struct drm_tv_connector_state {
 	enum drm_mode_subconnector select_subconnector;
 	enum drm_mode_subconnector subconnector;
 	struct drm_connector_tv_margins margins;
-	unsigned int mode;
+	unsigned int legacy_mode;
 	unsigned int brightness;
 	unsigned int contrast;
 	unsigned int flicker_reduction;
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 5362702fffe1..c47b29e80108 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -712,11 +712,13 @@ struct drm_mode_config {
 	 * between different TV connector types.
 	 */
 	struct drm_property *tv_select_subconnector_property;
+
 	/**
-	 * @tv_mode_property: Optional TV property to select
+	 * @legacy_tv_mode_property: Optional TV property to select
 	 * the output TV mode.
 	 */
-	struct drm_property *tv_mode_property;
+	struct drm_property *legacy_tv_mode_property;
+
 	/**
 	 * @tv_left_margin_property: Optional TV property to set the left
 	 * margin (expressed in pixels).

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 04/25] drm/connector: Only register TV mode property if present

[Maxime Ripard]

The drm_create_tv_properties() will create the TV mode property
unconditionally.

However, since we'll gradually phase it out, let's register it only if we
have a list passed as an argument. This will make the transition easier.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_connector.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 05edff79d312..78fcffae100b 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1690,15 +1690,18 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-	dev->mode_config.legacy_tv_mode_property =
-		drm_property_create(dev, DRM_MODE_PROP_ENUM,
-				    "mode", num_modes);
-	if (!dev->mode_config.legacy_tv_mode_property)
-		goto nomem;
 
-	for (i = 0; i < num_modes; i++)
-		drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
-				      i, modes[i]);
+	if (num_modes) {
+		dev->mode_config.legacy_tv_mode_property =
+			drm_property_create(dev, DRM_MODE_PROP_ENUM,
+					    "mode", num_modes);
+		if (!dev->mode_config.legacy_tv_mode_property)
+			goto nomem;
+
+		for (i = 0; i < num_modes; i++)
+			drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
+					      i, modes[i]);
+	}
 
 	dev->mode_config.tv_brightness_property =
 		drm_property_create_range(dev, 0, "brightness", 0, 100);

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 04/25] drm/connector: Only register TV mode property if present

[Maxime Ripard]

The drm_create_tv_properties() will create the TV mode property
unconditionally.

However, since we'll gradually phase it out, let's register it only if we
have a list passed as an argument. This will make the transition easier.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_connector.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 05edff79d312..78fcffae100b 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1690,15 +1690,18 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-	dev->mode_config.legacy_tv_mode_property =
-		drm_property_create(dev, DRM_MODE_PROP_ENUM,
-				    "mode", num_modes);
-	if (!dev->mode_config.legacy_tv_mode_property)
-		goto nomem;
 
-	for (i = 0; i < num_modes; i++)
-		drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
-				      i, modes[i]);
+	if (num_modes) {
+		dev->mode_config.legacy_tv_mode_property =
+			drm_property_create(dev, DRM_MODE_PROP_ENUM,
+					    "mode", num_modes);
+		if (!dev->mode_config.legacy_tv_mode_property)
+			goto nomem;
+
+		for (i = 0; i < num_modes; i++)
+			drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
+					      i, modes[i]);
+	}
 
 	dev->mode_config.tv_brightness_property =
 		drm_property_create_range(dev, 0, "brightness", 0, 100);

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 04/25] drm/connector: Only register TV mode property if present

[Maxime Ripard]

The drm_create_tv_properties() will create the TV mode property
unconditionally.

However, since we'll gradually phase it out, let's register it only if we
have a list passed as an argument. This will make the transition easier.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_connector.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 05edff79d312..78fcffae100b 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1690,15 +1690,18 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-	dev->mode_config.legacy_tv_mode_property =
-		drm_property_create(dev, DRM_MODE_PROP_ENUM,
-				    "mode", num_modes);
-	if (!dev->mode_config.legacy_tv_mode_property)
-		goto nomem;
 
-	for (i = 0; i < num_modes; i++)
-		drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
-				      i, modes[i]);
+	if (num_modes) {
+		dev->mode_config.legacy_tv_mode_property =
+			drm_property_create(dev, DRM_MODE_PROP_ENUM,
+					    "mode", num_modes);
+		if (!dev->mode_config.legacy_tv_mode_property)
+			goto nomem;
+
+		for (i = 0; i < num_modes; i++)
+			drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
+					      i, modes[i]);
+	}
 
 	dev->mode_config.tv_brightness_property =
 		drm_property_create_range(dev, 0, "brightness", 0, 100);

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 04/25] drm/connector: Only register TV mode property if present

[Maxime Ripard]

The drm_create_tv_properties() will create the TV mode property
unconditionally.

However, since we'll gradually phase it out, let's register it only if we
have a list passed as an argument. This will make the transition easier.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_connector.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 05edff79d312..78fcffae100b 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1690,15 +1690,18 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-	dev->mode_config.legacy_tv_mode_property =
-		drm_property_create(dev, DRM_MODE_PROP_ENUM,
-				    "mode", num_modes);
-	if (!dev->mode_config.legacy_tv_mode_property)
-		goto nomem;
 
-	for (i = 0; i < num_modes; i++)
-		drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
-				      i, modes[i]);
+	if (num_modes) {
+		dev->mode_config.legacy_tv_mode_property =
+			drm_property_create(dev, DRM_MODE_PROP_ENUM,
+					    "mode", num_modes);
+		if (!dev->mode_config.legacy_tv_mode_property)
+			goto nomem;
+
+		for (i = 0; i < num_modes; i++)
+			drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
+					      i, modes[i]);
+	}
 
 	dev->mode_config.tv_brightness_property =
 		drm_property_create_range(dev, 0, "brightness", 0, 100);

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 04/25] drm/connector: Only register TV mode property if present

[Maxime Ripard]

The drm_create_tv_properties() will create the TV mode property
unconditionally.

However, since we'll gradually phase it out, let's register it only if we
have a list passed as an argument. This will make the transition easier.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_connector.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 05edff79d312..78fcffae100b 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1690,15 +1690,18 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-	dev->mode_config.legacy_tv_mode_property =
-		drm_property_create(dev, DRM_MODE_PROP_ENUM,
-				    "mode", num_modes);
-	if (!dev->mode_config.legacy_tv_mode_property)
-		goto nomem;
 
-	for (i = 0; i < num_modes; i++)
-		drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
-				      i, modes[i]);
+	if (num_modes) {
+		dev->mode_config.legacy_tv_mode_property =
+			drm_property_create(dev, DRM_MODE_PROP_ENUM,
+					    "mode", num_modes);
+		if (!dev->mode_config.legacy_tv_mode_property)
+			goto nomem;
+
+		for (i = 0; i < num_modes; i++)
+			drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
+					      i, modes[i]);
+	}
 
 	dev->mode_config.tv_brightness_property =
 		drm_property_create_range(dev, 0, "brightness", 0, 100);

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 05/25] drm/connector: Rename drm_mode_create_tv_properties

[Maxime Ripard]

drm_mode_create_tv_properties(), among other things, will create the
"mode" property that stores the analog TV mode that connector is
supposed to output.

However, that property is getting deprecated, so let's rename that
function to mention it's deprecated. We'll introduce a new variant of
that function creating the property superseeding it in a later patch.

Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_connector.c           | 12 ++++++------
 drivers/gpu/drm/gud/gud_connector.c       |  4 ++--
 drivers/gpu/drm/i2c/ch7006_drv.c          |  2 +-
 drivers/gpu/drm/i915/display/intel_tv.c   |  2 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c |  2 +-
 drivers/gpu/drm/vc4/vc4_vec.c             |  5 +++--
 include/drm/drm_connector.h               |  6 +++---
 7 files changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 78fcffae100b..06e737ed15f5 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1604,7 +1604,7 @@ EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties);
  * Called by a driver's HDMI connector initialization routine, this function
  * creates the TV margin properties for a given device. No need to call this
  * function for an SDTV connector, it's already called from
- * drm_mode_create_tv_properties().
+ * drm_mode_create_tv_properties_legacy().
  *
  * Returns:
  * 0 on success or a negative error code on failure.
@@ -1639,7 +1639,7 @@ int drm_mode_create_tv_margin_properties(struct drm_device *dev)
 EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
 
 /**
- * drm_mode_create_tv_properties - create TV specific connector properties
+ * drm_mode_create_tv_properties_legacy - create TV specific connector properties
  * @dev: DRM device
  * @num_modes: number of different TV formats (modes) supported
  * @modes: array of pointers to strings containing name of each format
@@ -1652,9 +1652,9 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
  * Returns:
  * 0 on success or a negative error code on failure.
  */
-int drm_mode_create_tv_properties(struct drm_device *dev,
-				  unsigned int num_modes,
-				  const char * const modes[])
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+					 unsigned int num_modes,
+					 const char * const modes[])
 {
 	struct drm_property *tv_selector;
 	struct drm_property *tv_subconnector;
@@ -1737,7 +1737,7 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 nomem:
 	return -ENOMEM;
 }
-EXPORT_SYMBOL(drm_mode_create_tv_properties);
+EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
 
 /**
  * drm_mode_create_scaling_mode_property - create scaling mode property
diff --git a/drivers/gpu/drm/gud/gud_connector.c b/drivers/gpu/drm/gud/gud_connector.c
index 86e992b2108b..034e78360d4f 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -400,7 +400,7 @@ static int gud_connector_add_tv_mode(struct gud_device *gdrm, struct drm_connect
 	for (i = 0; i < num_modes; i++)
 		modes[i] = &buf[i * GUD_CONNECTOR_TV_MODE_NAME_LEN];
 
-	ret = drm_mode_create_tv_properties(connector->dev, num_modes, modes);
+	ret = drm_mode_create_tv_properties_legacy(connector->dev, num_modes, modes);
 free:
 	kfree(buf);
 	if (ret < 0)
@@ -539,7 +539,7 @@ static int gud_connector_add_properties(struct gud_device *gdrm, struct gud_conn
 			fallthrough;
 		case GUD_PROPERTY_TV_HUE:
 			/* This is a no-op if already added. */
-			ret = drm_mode_create_tv_properties(drm, 0, NULL);
+			ret = drm_mode_create_tv_properties_legacy(drm, 0, NULL);
 			if (ret)
 				goto out;
 			break;
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index ef69f9bdeace..b63bad04b09d 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -250,7 +250,7 @@ static int ch7006_encoder_create_resources(struct drm_encoder *encoder,
 	struct drm_device *dev = encoder->dev;
 	struct drm_mode_config *conf = &dev->mode_config;
 
-	drm_mode_create_tv_properties(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
+	drm_mode_create_tv_properties_legacy(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
 
 	priv->scale_property = drm_property_create_range(dev, 0, "scale", 0, 2);
 	if (!priv->scale_property)
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c
index 95b021da5a11..0affbc80ba89 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1903,7 +1903,7 @@ static void intel_tv_add_properties(struct drm_connector *connector)
 
 		tv_format_names[i] = tv_modes[i].name;
 	}
-	drm_mode_create_tv_properties(&i915->drm, i, tv_format_names);
+	drm_mode_create_tv_properties_legacy(&i915->drm, i, tv_format_names);
 
 	drm_object_attach_property(&connector->base,
 				   i915->drm.mode_config.legacy_tv_mode_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index 1a15534adc60..e5480dab55e3 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -653,7 +653,7 @@ static int nv17_tv_create_resources(struct drm_encoder *encoder,
 			tv_enc->tv_norm = i;
 	}
 
-	drm_mode_create_tv_properties(dev, num_tv_norms, nv17_tv_norm_names);
+	drm_mode_create_tv_properties_legacy(dev, num_tv_norms, nv17_tv_norm_names);
 
 	drm_object_attach_property(&connector->base,
 					conf->tv_select_subconnector_property,
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index e6043cf5d40e..adc9bf99e3fd 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -514,8 +514,9 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_vec *vec;
 	int ret;
 
-	ret = drm_mode_create_tv_properties(drm, ARRAY_SIZE(tv_mode_names),
-					    tv_mode_names);
+	ret = drm_mode_create_tv_properties_legacy(drm,
+						   ARRAY_SIZE(tv_mode_names),
+						   tv_mode_names);
 	if (ret)
 		return ret;
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index f18c2ba113d7..5913b8415137 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1807,9 +1807,9 @@ int drm_mode_create_dvi_i_properties(struct drm_device *dev);
 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector);
 
 int drm_mode_create_tv_margin_properties(struct drm_device *dev);
-int drm_mode_create_tv_properties(struct drm_device *dev,
-				  unsigned int num_modes,
-				  const char * const modes[]);
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+					 unsigned int num_modes,
+					 const char * const modes[]);
 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_connector_attach_content_type_property(struct drm_connector *dev);

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 05/25] drm/connector: Rename drm_mode_create_tv_properties

[Maxime Ripard]

drm_mode_create_tv_properties(), among other things, will create the
"mode" property that stores the analog TV mode that connector is
supposed to output.

However, that property is getting deprecated, so let's rename that
function to mention it's deprecated. We'll introduce a new variant of
that function creating the property superseeding it in a later patch.

Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_connector.c           | 12 ++++++------
 drivers/gpu/drm/gud/gud_connector.c       |  4 ++--
 drivers/gpu/drm/i2c/ch7006_drv.c          |  2 +-
 drivers/gpu/drm/i915/display/intel_tv.c   |  2 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c |  2 +-
 drivers/gpu/drm/vc4/vc4_vec.c             |  5 +++--
 include/drm/drm_connector.h               |  6 +++---
 7 files changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 78fcffae100b..06e737ed15f5 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1604,7 +1604,7 @@ EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties);
  * Called by a driver's HDMI connector initialization routine, this function
  * creates the TV margin properties for a given device. No need to call this
  * function for an SDTV connector, it's already called from
- * drm_mode_create_tv_properties().
+ * drm_mode_create_tv_properties_legacy().
  *
  * Returns:
  * 0 on success or a negative error code on failure.
@@ -1639,7 +1639,7 @@ int drm_mode_create_tv_margin_properties(struct drm_device *dev)
 EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
 
 /**
- * drm_mode_create_tv_properties - create TV specific connector properties
+ * drm_mode_create_tv_properties_legacy - create TV specific connector properties
  * @dev: DRM device
  * @num_modes: number of different TV formats (modes) supported
  * @modes: array of pointers to strings containing name of each format
@@ -1652,9 +1652,9 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
  * Returns:
  * 0 on success or a negative error code on failure.
  */
-int drm_mode_create_tv_properties(struct drm_device *dev,
-				  unsigned int num_modes,
-				  const char * const modes[])
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+					 unsigned int num_modes,
+					 const char * const modes[])
 {
 	struct drm_property *tv_selector;
 	struct drm_property *tv_subconnector;
@@ -1737,7 +1737,7 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 nomem:
 	return -ENOMEM;
 }
-EXPORT_SYMBOL(drm_mode_create_tv_properties);
+EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
 
 /**
  * drm_mode_create_scaling_mode_property - create scaling mode property
diff --git a/drivers/gpu/drm/gud/gud_connector.c b/drivers/gpu/drm/gud/gud_connector.c
index 86e992b2108b..034e78360d4f 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -400,7 +400,7 @@ static int gud_connector_add_tv_mode(struct gud_device *gdrm, struct drm_connect
 	for (i = 0; i < num_modes; i++)
 		modes[i] = &buf[i * GUD_CONNECTOR_TV_MODE_NAME_LEN];
 
-	ret = drm_mode_create_tv_properties(connector->dev, num_modes, modes);
+	ret = drm_mode_create_tv_properties_legacy(connector->dev, num_modes, modes);
 free:
 	kfree(buf);
 	if (ret < 0)
@@ -539,7 +539,7 @@ static int gud_connector_add_properties(struct gud_device *gdrm, struct gud_conn
 			fallthrough;
 		case GUD_PROPERTY_TV_HUE:
 			/* This is a no-op if already added. */
-			ret = drm_mode_create_tv_properties(drm, 0, NULL);
+			ret = drm_mode_create_tv_properties_legacy(drm, 0, NULL);
 			if (ret)
 				goto out;
 			break;
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index ef69f9bdeace..b63bad04b09d 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -250,7 +250,7 @@ static int ch7006_encoder_create_resources(struct drm_encoder *encoder,
 	struct drm_device *dev = encoder->dev;
 	struct drm_mode_config *conf = &dev->mode_config;
 
-	drm_mode_create_tv_properties(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
+	drm_mode_create_tv_properties_legacy(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
 
 	priv->scale_property = drm_property_create_range(dev, 0, "scale", 0, 2);
 	if (!priv->scale_property)
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c
index 95b021da5a11..0affbc80ba89 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1903,7 +1903,7 @@ static void intel_tv_add_properties(struct drm_connector *connector)
 
 		tv_format_names[i] = tv_modes[i].name;
 	}
-	drm_mode_create_tv_properties(&i915->drm, i, tv_format_names);
+	drm_mode_create_tv_properties_legacy(&i915->drm, i, tv_format_names);
 
 	drm_object_attach_property(&connector->base,
 				   i915->drm.mode_config.legacy_tv_mode_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index 1a15534adc60..e5480dab55e3 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -653,7 +653,7 @@ static int nv17_tv_create_resources(struct drm_encoder *encoder,
 			tv_enc->tv_norm = i;
 	}
 
-	drm_mode_create_tv_properties(dev, num_tv_norms, nv17_tv_norm_names);
+	drm_mode_create_tv_properties_legacy(dev, num_tv_norms, nv17_tv_norm_names);
 
 	drm_object_attach_property(&connector->base,
 					conf->tv_select_subconnector_property,
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index e6043cf5d40e..adc9bf99e3fd 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -514,8 +514,9 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_vec *vec;
 	int ret;
 
-	ret = drm_mode_create_tv_properties(drm, ARRAY_SIZE(tv_mode_names),
-					    tv_mode_names);
+	ret = drm_mode_create_tv_properties_legacy(drm,
+						   ARRAY_SIZE(tv_mode_names),
+						   tv_mode_names);
 	if (ret)
 		return ret;
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index f18c2ba113d7..5913b8415137 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1807,9 +1807,9 @@ int drm_mode_create_dvi_i_properties(struct drm_device *dev);
 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector);
 
 int drm_mode_create_tv_margin_properties(struct drm_device *dev);
-int drm_mode_create_tv_properties(struct drm_device *dev,
-				  unsigned int num_modes,
-				  const char * const modes[]);
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+					 unsigned int num_modes,
+					 const char * const modes[]);
 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_connector_attach_content_type_property(struct drm_connector *dev);

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 05/25] drm/connector: Rename drm_mode_create_tv_properties

[Maxime Ripard]

drm_mode_create_tv_properties(), among other things, will create the
"mode" property that stores the analog TV mode that connector is
supposed to output.

However, that property is getting deprecated, so let's rename that
function to mention it's deprecated. We'll introduce a new variant of
that function creating the property superseeding it in a later patch.

Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_connector.c           | 12 ++++++------
 drivers/gpu/drm/gud/gud_connector.c       |  4 ++--
 drivers/gpu/drm/i2c/ch7006_drv.c          |  2 +-
 drivers/gpu/drm/i915/display/intel_tv.c   |  2 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c |  2 +-
 drivers/gpu/drm/vc4/vc4_vec.c             |  5 +++--
 include/drm/drm_connector.h               |  6 +++---
 7 files changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 78fcffae100b..06e737ed15f5 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1604,7 +1604,7 @@ EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties);
  * Called by a driver's HDMI connector initialization routine, this function
  * creates the TV margin properties for a given device. No need to call this
  * function for an SDTV connector, it's already called from
- * drm_mode_create_tv_properties().
+ * drm_mode_create_tv_properties_legacy().
  *
  * Returns:
  * 0 on success or a negative error code on failure.
@@ -1639,7 +1639,7 @@ int drm_mode_create_tv_margin_properties(struct drm_device *dev)
 EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
 
 /**
- * drm_mode_create_tv_properties - create TV specific connector properties
+ * drm_mode_create_tv_properties_legacy - create TV specific connector properties
  * @dev: DRM device
  * @num_modes: number of different TV formats (modes) supported
  * @modes: array of pointers to strings containing name of each format
@@ -1652,9 +1652,9 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
  * Returns:
  * 0 on success or a negative error code on failure.
  */
-int drm_mode_create_tv_properties(struct drm_device *dev,
-				  unsigned int num_modes,
-				  const char * const modes[])
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+					 unsigned int num_modes,
+					 const char * const modes[])
 {
 	struct drm_property *tv_selector;
 	struct drm_property *tv_subconnector;
@@ -1737,7 +1737,7 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 nomem:
 	return -ENOMEM;
 }
-EXPORT_SYMBOL(drm_mode_create_tv_properties);
+EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
 
 /**
  * drm_mode_create_scaling_mode_property - create scaling mode property
diff --git a/drivers/gpu/drm/gud/gud_connector.c b/drivers/gpu/drm/gud/gud_connector.c
index 86e992b2108b..034e78360d4f 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -400,7 +400,7 @@ static int gud_connector_add_tv_mode(struct gud_device *gdrm, struct drm_connect
 	for (i = 0; i < num_modes; i++)
 		modes[i] = &buf[i * GUD_CONNECTOR_TV_MODE_NAME_LEN];
 
-	ret = drm_mode_create_tv_properties(connector->dev, num_modes, modes);
+	ret = drm_mode_create_tv_properties_legacy(connector->dev, num_modes, modes);
 free:
 	kfree(buf);
 	if (ret < 0)
@@ -539,7 +539,7 @@ static int gud_connector_add_properties(struct gud_device *gdrm, struct gud_conn
 			fallthrough;
 		case GUD_PROPERTY_TV_HUE:
 			/* This is a no-op if already added. */
-			ret = drm_mode_create_tv_properties(drm, 0, NULL);
+			ret = drm_mode_create_tv_properties_legacy(drm, 0, NULL);
 			if (ret)
 				goto out;
 			break;
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index ef69f9bdeace..b63bad04b09d 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -250,7 +250,7 @@ static int ch7006_encoder_create_resources(struct drm_encoder *encoder,
 	struct drm_device *dev = encoder->dev;
 	struct drm_mode_config *conf = &dev->mode_config;
 
-	drm_mode_create_tv_properties(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
+	drm_mode_create_tv_properties_legacy(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
 
 	priv->scale_property = drm_property_create_range(dev, 0, "scale", 0, 2);
 	if (!priv->scale_property)
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c
index 95b021da5a11..0affbc80ba89 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1903,7 +1903,7 @@ static void intel_tv_add_properties(struct drm_connector *connector)
 
 		tv_format_names[i] = tv_modes[i].name;
 	}
-	drm_mode_create_tv_properties(&i915->drm, i, tv_format_names);
+	drm_mode_create_tv_properties_legacy(&i915->drm, i, tv_format_names);
 
 	drm_object_attach_property(&connector->base,
 				   i915->drm.mode_config.legacy_tv_mode_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index 1a15534adc60..e5480dab55e3 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -653,7 +653,7 @@ static int nv17_tv_create_resources(struct drm_encoder *encoder,
 			tv_enc->tv_norm = i;
 	}
 
-	drm_mode_create_tv_properties(dev, num_tv_norms, nv17_tv_norm_names);
+	drm_mode_create_tv_properties_legacy(dev, num_tv_norms, nv17_tv_norm_names);
 
 	drm_object_attach_property(&connector->base,
 					conf->tv_select_subconnector_property,
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index e6043cf5d40e..adc9bf99e3fd 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -514,8 +514,9 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_vec *vec;
 	int ret;
 
-	ret = drm_mode_create_tv_properties(drm, ARRAY_SIZE(tv_mode_names),
-					    tv_mode_names);
+	ret = drm_mode_create_tv_properties_legacy(drm,
+						   ARRAY_SIZE(tv_mode_names),
+						   tv_mode_names);
 	if (ret)
 		return ret;
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index f18c2ba113d7..5913b8415137 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1807,9 +1807,9 @@ int drm_mode_create_dvi_i_properties(struct drm_device *dev);
 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector);
 
 int drm_mode_create_tv_margin_properties(struct drm_device *dev);
-int drm_mode_create_tv_properties(struct drm_device *dev,
-				  unsigned int num_modes,
-				  const char * const modes[]);
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+					 unsigned int num_modes,
+					 const char * const modes[]);
 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_connector_attach_content_type_property(struct drm_connector *dev);

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 05/25] drm/connector: Rename drm_mode_create_tv_properties

[Maxime Ripard]

drm_mode_create_tv_properties(), among other things, will create the
"mode" property that stores the analog TV mode that connector is
supposed to output.

However, that property is getting deprecated, so let's rename that
function to mention it's deprecated. We'll introduce a new variant of
that function creating the property superseeding it in a later patch.

Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_connector.c           | 12 ++++++------
 drivers/gpu/drm/gud/gud_connector.c       |  4 ++--
 drivers/gpu/drm/i2c/ch7006_drv.c          |  2 +-
 drivers/gpu/drm/i915/display/intel_tv.c   |  2 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c |  2 +-
 drivers/gpu/drm/vc4/vc4_vec.c             |  5 +++--
 include/drm/drm_connector.h               |  6 +++---
 7 files changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 78fcffae100b..06e737ed15f5 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1604,7 +1604,7 @@ EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties);
  * Called by a driver's HDMI connector initialization routine, this function
  * creates the TV margin properties for a given device. No need to call this
  * function for an SDTV connector, it's already called from
- * drm_mode_create_tv_properties().
+ * drm_mode_create_tv_properties_legacy().
  *
  * Returns:
  * 0 on success or a negative error code on failure.
@@ -1639,7 +1639,7 @@ int drm_mode_create_tv_margin_properties(struct drm_device *dev)
 EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
 
 /**
- * drm_mode_create_tv_properties - create TV specific connector properties
+ * drm_mode_create_tv_properties_legacy - create TV specific connector properties
  * @dev: DRM device
  * @num_modes: number of different TV formats (modes) supported
  * @modes: array of pointers to strings containing name of each format
@@ -1652,9 +1652,9 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
  * Returns:
  * 0 on success or a negative error code on failure.
  */
-int drm_mode_create_tv_properties(struct drm_device *dev,
-				  unsigned int num_modes,
-				  const char * const modes[])
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+					 unsigned int num_modes,
+					 const char * const modes[])
 {
 	struct drm_property *tv_selector;
 	struct drm_property *tv_subconnector;
@@ -1737,7 +1737,7 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 nomem:
 	return -ENOMEM;
 }
-EXPORT_SYMBOL(drm_mode_create_tv_properties);
+EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
 
 /**
  * drm_mode_create_scaling_mode_property - create scaling mode property
diff --git a/drivers/gpu/drm/gud/gud_connector.c b/drivers/gpu/drm/gud/gud_connector.c
index 86e992b2108b..034e78360d4f 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -400,7 +400,7 @@ static int gud_connector_add_tv_mode(struct gud_device *gdrm, struct drm_connect
 	for (i = 0; i < num_modes; i++)
 		modes[i] = &buf[i * GUD_CONNECTOR_TV_MODE_NAME_LEN];
 
-	ret = drm_mode_create_tv_properties(connector->dev, num_modes, modes);
+	ret = drm_mode_create_tv_properties_legacy(connector->dev, num_modes, modes);
 free:
 	kfree(buf);
 	if (ret < 0)
@@ -539,7 +539,7 @@ static int gud_connector_add_properties(struct gud_device *gdrm, struct gud_conn
 			fallthrough;
 		case GUD_PROPERTY_TV_HUE:
 			/* This is a no-op if already added. */
-			ret = drm_mode_create_tv_properties(drm, 0, NULL);
+			ret = drm_mode_create_tv_properties_legacy(drm, 0, NULL);
 			if (ret)
 				goto out;
 			break;
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index ef69f9bdeace..b63bad04b09d 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -250,7 +250,7 @@ static int ch7006_encoder_create_resources(struct drm_encoder *encoder,
 	struct drm_device *dev = encoder->dev;
 	struct drm_mode_config *conf = &dev->mode_config;
 
-	drm_mode_create_tv_properties(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
+	drm_mode_create_tv_properties_legacy(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
 
 	priv->scale_property = drm_property_create_range(dev, 0, "scale", 0, 2);
 	if (!priv->scale_property)
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c
index 95b021da5a11..0affbc80ba89 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1903,7 +1903,7 @@ static void intel_tv_add_properties(struct drm_connector *connector)
 
 		tv_format_names[i] = tv_modes[i].name;
 	}
-	drm_mode_create_tv_properties(&i915->drm, i, tv_format_names);
+	drm_mode_create_tv_properties_legacy(&i915->drm, i, tv_format_names);
 
 	drm_object_attach_property(&connector->base,
 				   i915->drm.mode_config.legacy_tv_mode_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index 1a15534adc60..e5480dab55e3 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -653,7 +653,7 @@ static int nv17_tv_create_resources(struct drm_encoder *encoder,
 			tv_enc->tv_norm = i;
 	}
 
-	drm_mode_create_tv_properties(dev, num_tv_norms, nv17_tv_norm_names);
+	drm_mode_create_tv_properties_legacy(dev, num_tv_norms, nv17_tv_norm_names);
 
 	drm_object_attach_property(&connector->base,
 					conf->tv_select_subconnector_property,
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index e6043cf5d40e..adc9bf99e3fd 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -514,8 +514,9 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_vec *vec;
 	int ret;
 
-	ret = drm_mode_create_tv_properties(drm, ARRAY_SIZE(tv_mode_names),
-					    tv_mode_names);
+	ret = drm_mode_create_tv_properties_legacy(drm,
+						   ARRAY_SIZE(tv_mode_names),
+						   tv_mode_names);
 	if (ret)
 		return ret;
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index f18c2ba113d7..5913b8415137 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1807,9 +1807,9 @@ int drm_mode_create_dvi_i_properties(struct drm_device *dev);
 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector);
 
 int drm_mode_create_tv_margin_properties(struct drm_device *dev);
-int drm_mode_create_tv_properties(struct drm_device *dev,
-				  unsigned int num_modes,
-				  const char * const modes[]);
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+					 unsigned int num_modes,
+					 const char * const modes[]);
 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_connector_attach_content_type_property(struct drm_connector *dev);

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 05/25] drm/connector: Rename drm_mode_create_tv_properties

[Maxime Ripard]

drm_mode_create_tv_properties(), among other things, will create the
"mode" property that stores the analog TV mode that connector is
supposed to output.

However, that property is getting deprecated, so let's rename that
function to mention it's deprecated. We'll introduce a new variant of
that function creating the property superseeding it in a later patch.

Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_connector.c           | 12 ++++++------
 drivers/gpu/drm/gud/gud_connector.c       |  4 ++--
 drivers/gpu/drm/i2c/ch7006_drv.c          |  2 +-
 drivers/gpu/drm/i915/display/intel_tv.c   |  2 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c |  2 +-
 drivers/gpu/drm/vc4/vc4_vec.c             |  5 +++--
 include/drm/drm_connector.h               |  6 +++---
 7 files changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 78fcffae100b..06e737ed15f5 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1604,7 +1604,7 @@ EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties);
  * Called by a driver's HDMI connector initialization routine, this function
  * creates the TV margin properties for a given device. No need to call this
  * function for an SDTV connector, it's already called from
- * drm_mode_create_tv_properties().
+ * drm_mode_create_tv_properties_legacy().
  *
  * Returns:
  * 0 on success or a negative error code on failure.
@@ -1639,7 +1639,7 @@ int drm_mode_create_tv_margin_properties(struct drm_device *dev)
 EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
 
 /**
- * drm_mode_create_tv_properties - create TV specific connector properties
+ * drm_mode_create_tv_properties_legacy - create TV specific connector properties
  * @dev: DRM device
  * @num_modes: number of different TV formats (modes) supported
  * @modes: array of pointers to strings containing name of each format
@@ -1652,9 +1652,9 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
  * Returns:
  * 0 on success or a negative error code on failure.
  */
-int drm_mode_create_tv_properties(struct drm_device *dev,
-				  unsigned int num_modes,
-				  const char * const modes[])
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+					 unsigned int num_modes,
+					 const char * const modes[])
 {
 	struct drm_property *tv_selector;
 	struct drm_property *tv_subconnector;
@@ -1737,7 +1737,7 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 nomem:
 	return -ENOMEM;
 }
-EXPORT_SYMBOL(drm_mode_create_tv_properties);
+EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
 
 /**
  * drm_mode_create_scaling_mode_property - create scaling mode property
diff --git a/drivers/gpu/drm/gud/gud_connector.c b/drivers/gpu/drm/gud/gud_connector.c
index 86e992b2108b..034e78360d4f 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -400,7 +400,7 @@ static int gud_connector_add_tv_mode(struct gud_device *gdrm, struct drm_connect
 	for (i = 0; i < num_modes; i++)
 		modes[i] = &buf[i * GUD_CONNECTOR_TV_MODE_NAME_LEN];
 
-	ret = drm_mode_create_tv_properties(connector->dev, num_modes, modes);
+	ret = drm_mode_create_tv_properties_legacy(connector->dev, num_modes, modes);
 free:
 	kfree(buf);
 	if (ret < 0)
@@ -539,7 +539,7 @@ static int gud_connector_add_properties(struct gud_device *gdrm, struct gud_conn
 			fallthrough;
 		case GUD_PROPERTY_TV_HUE:
 			/* This is a no-op if already added. */
-			ret = drm_mode_create_tv_properties(drm, 0, NULL);
+			ret = drm_mode_create_tv_properties_legacy(drm, 0, NULL);
 			if (ret)
 				goto out;
 			break;
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index ef69f9bdeace..b63bad04b09d 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -250,7 +250,7 @@ static int ch7006_encoder_create_resources(struct drm_encoder *encoder,
 	struct drm_device *dev = encoder->dev;
 	struct drm_mode_config *conf = &dev->mode_config;
 
-	drm_mode_create_tv_properties(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
+	drm_mode_create_tv_properties_legacy(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
 
 	priv->scale_property = drm_property_create_range(dev, 0, "scale", 0, 2);
 	if (!priv->scale_property)
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c
index 95b021da5a11..0affbc80ba89 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1903,7 +1903,7 @@ static void intel_tv_add_properties(struct drm_connector *connector)
 
 		tv_format_names[i] = tv_modes[i].name;
 	}
-	drm_mode_create_tv_properties(&i915->drm, i, tv_format_names);
+	drm_mode_create_tv_properties_legacy(&i915->drm, i, tv_format_names);
 
 	drm_object_attach_property(&connector->base,
 				   i915->drm.mode_config.legacy_tv_mode_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index 1a15534adc60..e5480dab55e3 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -653,7 +653,7 @@ static int nv17_tv_create_resources(struct drm_encoder *encoder,
 			tv_enc->tv_norm = i;
 	}
 
-	drm_mode_create_tv_properties(dev, num_tv_norms, nv17_tv_norm_names);
+	drm_mode_create_tv_properties_legacy(dev, num_tv_norms, nv17_tv_norm_names);
 
 	drm_object_attach_property(&connector->base,
 					conf->tv_select_subconnector_property,
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index e6043cf5d40e..adc9bf99e3fd 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -514,8 +514,9 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_vec *vec;
 	int ret;
 
-	ret = drm_mode_create_tv_properties(drm, ARRAY_SIZE(tv_mode_names),
-					    tv_mode_names);
+	ret = drm_mode_create_tv_properties_legacy(drm,
+						   ARRAY_SIZE(tv_mode_names),
+						   tv_mode_names);
 	if (ret)
 		return ret;
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index f18c2ba113d7..5913b8415137 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1807,9 +1807,9 @@ int drm_mode_create_dvi_i_properties(struct drm_device *dev);
 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector);
 
 int drm_mode_create_tv_margin_properties(struct drm_device *dev);
-int drm_mode_create_tv_properties(struct drm_device *dev,
-				  unsigned int num_modes,
-				  const char * const modes[]);
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+					 unsigned int num_modes,
+					 const char * const modes[]);
 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_connector_attach_content_type_property(struct drm_connector *dev);

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 06/25] drm/connector: Add TV standard property

[Maxime Ripard]

The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.

Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.

Let's create a new enum tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports, and the property
creation function will filter out the modes not supported.

We'll then be able to phase out the older tv mode property.

Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v5:
- Create an analog TV properties documentation section, and document TV
  Mode there instead of the csv file

Changes in v4:
- Add property documentation to kms-properties.csv
- Fix documentation
---
 Documentation/gpu/drm-kms.rst     |   6 ++
 drivers/gpu/drm/drm_atomic_uapi.c |   4 ++
 drivers/gpu/drm/drm_connector.c   | 122 +++++++++++++++++++++++++++++++++++++-
 include/drm/drm_connector.h       |  64 ++++++++++++++++++++
 include/drm/drm_mode_config.h     |   8 +++
 5 files changed, 203 insertions(+), 1 deletion(-)

diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index b4377a545425..321f2f582c64 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -520,6 +520,12 @@ HDMI Specific Connector Properties
 .. kernel-doc:: drivers/gpu/drm/drm_connector.c
    :doc: HDMI connector properties
 
+Analog TV Specific Connector Properties
+----------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_connector.c
+   :doc: Analog TV Connector Properties
+
 Standard CRTC Properties
 ------------------------
 
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 7f2b9a07fbdf..d867e7f9f2cd 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -700,6 +700,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
 		state->tv.margins.bottom = val;
 	} else if (property == config->legacy_tv_mode_property) {
 		state->tv.legacy_mode = val;
+	} else if (property == config->tv_mode_property) {
+		state->tv.mode = val;
 	} else if (property == config->tv_brightness_property) {
 		state->tv.brightness = val;
 	} else if (property == config->tv_contrast_property) {
@@ -810,6 +812,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
 		*val = state->tv.margins.bottom;
 	} else if (property == config->legacy_tv_mode_property) {
 		*val = state->tv.legacy_mode;
+	} else if (property == config->tv_mode_property) {
+		*val = state->tv.mode;
 	} else if (property == config->tv_brightness_property) {
 		*val = state->tv.brightness;
 	} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 06e737ed15f5..07d449736956 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -984,6 +984,17 @@ static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
 DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
 		 drm_dvi_i_subconnector_enum_list)
 
+static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
+	{ DRM_MODE_TV_MODE_NTSC, "NTSC" },
+	{ DRM_MODE_TV_MODE_NTSC_443, "NTSC-443" },
+	{ DRM_MODE_TV_MODE_NTSC_J, "NTSC-J" },
+	{ DRM_MODE_TV_MODE_PAL, "PAL" },
+	{ DRM_MODE_TV_MODE_PAL_M, "PAL-M" },
+	{ DRM_MODE_TV_MODE_PAL_N, "PAL-N" },
+	{ DRM_MODE_TV_MODE_SECAM, "SECAM" },
+};
+DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
+
 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
@@ -1552,6 +1563,71 @@ EXPORT_SYMBOL(drm_connector_attach_dp_subconnector_property);
  *	infoframe values is done through drm_hdmi_avi_infoframe_content_type().
  */
 
+/*
+ * TODO: Document the properties:
+ *   - left margin
+ *   - right margin
+ *   - top margin
+ *   - bottom margin
+ *   - brightness
+ *   - contrast
+ *   - flicker reduction
+ *   - hue
+ *   - mode
+ *   - overscan
+ *   - saturation
+ *   - select subconnector
+ *   - subconnector
+ */
+/**
+ * DOC: Analog TV Connector Properties
+ *
+ * TV Mode:
+ *	Indicates the TV Mode used on an analog TV connector. The value
+ *	of this property can be one of the following:
+ *
+ *	NTSC:
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding.
+ *
+ *	NTSC-443:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding, but with a color subcarrier
+ *		frequency of 4.43MHz
+ *
+ *	NTSC-J:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding, but with a black level equal to
+ *		the blanking level.
+ *
+ *	PAL:
+ *
+ *		TV Mode is CCIR System B (aka 625-lines) together with
+ *		the PAL Color Encoding.
+ *
+ *	PAL-M:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the PAL Color Encoding.
+ *
+ *	PAL-N:
+ *
+ *		TV Mode is CCIR System N together with the PAL Color
+ *		Encoding, a color subcarrier frequency of 3.58MHz, the
+ *		SECAM color space, and narrower channels than other PAL
+ *		variants.
+ *
+ *	SECAM:
+ *
+ *		TV Mode is CCIR System B (aka 625-lines) together with
+ *		the SECAM Color Encoding.
+ *
+ *	Drivers can set up this property by calling
+ *	drm_mode_create_tv_properties().
+ */
+
 /**
  * drm_connector_attach_content_type_property - attach content-type property
  * @connector: connector to attach content type property on.
@@ -1649,6 +1725,10 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
  * responsible for allocating a list of format names and passing them to
  * this routine.
  *
+ * NOTE: This functions registers the deprecated "mode" connector
+ * property to select the analog TV mode (ie, NTSC, PAL, etc.). New
+ * drivers must use drm_mode_create_tv_properties() instead.
+ *
  * Returns:
  * 0 on success or a negative error code on failure.
  */
@@ -1690,7 +1770,6 @@ int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-
 	if (num_modes) {
 		dev->mode_config.legacy_tv_mode_property =
 			drm_property_create(dev, DRM_MODE_PROP_ENUM,
@@ -1739,6 +1818,47 @@ int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 }
 EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
 
+/**
+ * drm_mode_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @supported_tv_modes: Bitmask of TV modes supported (See DRM_MODE_TV_MODE_*)
+
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int supported_tv_modes)
+{
+	struct drm_prop_enum_list tv_mode_list[DRM_MODE_TV_MODE_MAX];
+	struct drm_property *tv_mode;
+	unsigned int i, len = 0;
+
+	if (dev->mode_config.tv_mode_property)
+		return 0;
+
+	for (i = 0; i < DRM_MODE_TV_MODE_MAX; i++) {
+		if (!(supported_tv_modes & BIT(i)))
+			continue;
+
+		tv_mode_list[len].type = i;
+		tv_mode_list[len].name = drm_get_tv_mode_name(i);
+		len++;
+	}
+
+	tv_mode = drm_property_create_enum(dev, 0, "TV mode",
+					   tv_mode_list, len);
+	if (!tv_mode)
+		return -ENOMEM;
+
+	dev->mode_config.tv_mode_property = tv_mode;
+
+	return drm_mode_create_tv_properties_legacy(dev, 0, NULL);
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
 /**
  * drm_mode_create_scaling_mode_property - create scaling mode property
  * @dev: DRM device
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 5913b8415137..9afc7956fdc6 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -143,6 +143,65 @@ enum subpixel_order {
 
 };
 
+/**
+ * enum drm_connector_tv_mode - Analog TV output mode
+ *
+ * This enum is used to indicate the TV output mode used on an analog TV
+ * connector.
+ *
+ * WARNING: The values of this enum is uABI since they're exposed in the
+ * "TV mode" connector property.
+ */
+enum drm_connector_tv_mode {
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC: CCIR System M (aka 525-lines)
+	 * together with the NTSC Color Encoding.
+	 */
+	DRM_MODE_TV_MODE_NTSC,
+
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC_443: Variant of
+	 * @DRM_MODE_TV_MODE_NTSC. Uses a color subcarrier frequency
+	 * of 4.43 MHz.
+	 */
+	DRM_MODE_TV_MODE_NTSC_443,
+
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC_J: Variant of @DRM_MODE_TV_MODE_NTSC
+	 * used in Japan. Uses a black level equals to the blanking
+	 * level.
+	 */
+	DRM_MODE_TV_MODE_NTSC_J,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL: CCIR System B together with the PAL
+	 * color system.
+	 */
+	DRM_MODE_TV_MODE_PAL,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL_M: CCIR System M (aka 525-lines)
+	 * together with the PAL color encoding
+	 */
+	DRM_MODE_TV_MODE_PAL_M,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL_N: CCIR System N together with the PAL
+	 * color encoding. It uses 625 lines, but has a color subcarrier
+	 * frequency of 3.58MHz, the SECAM color space, and narrower
+	 * channels compared to most of the other PAL variants.
+	 */
+	DRM_MODE_TV_MODE_PAL_N,
+
+	/**
+	 * @DRM_MODE_TV_MODE_SECAM: CCIR System B together with the
+	 * SECAM color system.
+	 */
+	DRM_MODE_TV_MODE_SECAM,
+
+	DRM_MODE_TV_MODE_MAX,
+};
+
 /**
  * struct drm_scrambling: sink's scrambling support.
  */
@@ -696,6 +755,7 @@ struct drm_connector_tv_margins {
  * @subconnector: detected subconnector
  * @margins: TV margins
  * @legacy_mode: Legacy TV mode, driver specific value
+ * @mode: TV mode
  * @brightness: brightness in percent
  * @contrast: contrast in percent
  * @flicker_reduction: flicker reduction in percent
@@ -708,6 +768,7 @@ struct drm_tv_connector_state {
 	enum drm_mode_subconnector subconnector;
 	struct drm_connector_tv_margins margins;
 	unsigned int legacy_mode;
+	unsigned int mode;
 	unsigned int brightness;
 	unsigned int contrast;
 	unsigned int flicker_reduction;
@@ -1797,6 +1858,7 @@ const char *drm_get_subpixel_order_name(enum subpixel_order order);
 const char *drm_get_dpms_name(int val);
 const char *drm_get_dvi_i_subconnector_name(int val);
 const char *drm_get_dvi_i_select_name(int val);
+const char *drm_get_tv_mode_name(int val);
 const char *drm_get_tv_subconnector_name(int val);
 const char *drm_get_tv_select_name(int val);
 const char *drm_get_dp_subconnector_name(int val);
@@ -1810,6 +1872,8 @@ int drm_mode_create_tv_margin_properties(struct drm_device *dev);
 int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 					 unsigned int num_modes,
 					 const char * const modes[]);
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int supported_tv_modes);
 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_connector_attach_content_type_property(struct drm_connector *dev);
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index c47b29e80108..1a8bcc3fd14e 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -716,9 +716,17 @@ struct drm_mode_config {
 	/**
 	 * @legacy_tv_mode_property: Optional TV property to select
 	 * the output TV mode.
+	 *
+	 * Superseeded by @tv_mode_property
 	 */
 	struct drm_property *legacy_tv_mode_property;
 
+	/**
+	 * @tv_mode_property: Optional TV property to select the TV
+	 * standard output on the connector.
+	 */
+	struct drm_property *tv_mode_property;
+
 	/**
 	 * @tv_left_margin_property: Optional TV property to set the left
 	 * margin (expressed in pixels).

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 06/25] drm/connector: Add TV standard property

[Maxime Ripard]

The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.

Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.

Let's create a new enum tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports, and the property
creation function will filter out the modes not supported.

We'll then be able to phase out the older tv mode property.

Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v5:
- Create an analog TV properties documentation section, and document TV
  Mode there instead of the csv file

Changes in v4:
- Add property documentation to kms-properties.csv
- Fix documentation
---
 Documentation/gpu/drm-kms.rst     |   6 ++
 drivers/gpu/drm/drm_atomic_uapi.c |   4 ++
 drivers/gpu/drm/drm_connector.c   | 122 +++++++++++++++++++++++++++++++++++++-
 include/drm/drm_connector.h       |  64 ++++++++++++++++++++
 include/drm/drm_mode_config.h     |   8 +++
 5 files changed, 203 insertions(+), 1 deletion(-)

diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index b4377a545425..321f2f582c64 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -520,6 +520,12 @@ HDMI Specific Connector Properties
 .. kernel-doc:: drivers/gpu/drm/drm_connector.c
    :doc: HDMI connector properties
 
+Analog TV Specific Connector Properties
+----------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_connector.c
+   :doc: Analog TV Connector Properties
+
 Standard CRTC Properties
 ------------------------
 
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 7f2b9a07fbdf..d867e7f9f2cd 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -700,6 +700,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
 		state->tv.margins.bottom = val;
 	} else if (property == config->legacy_tv_mode_property) {
 		state->tv.legacy_mode = val;
+	} else if (property == config->tv_mode_property) {
+		state->tv.mode = val;
 	} else if (property == config->tv_brightness_property) {
 		state->tv.brightness = val;
 	} else if (property == config->tv_contrast_property) {
@@ -810,6 +812,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
 		*val = state->tv.margins.bottom;
 	} else if (property == config->legacy_tv_mode_property) {
 		*val = state->tv.legacy_mode;
+	} else if (property == config->tv_mode_property) {
+		*val = state->tv.mode;
 	} else if (property == config->tv_brightness_property) {
 		*val = state->tv.brightness;
 	} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 06e737ed15f5..07d449736956 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -984,6 +984,17 @@ static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
 DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
 		 drm_dvi_i_subconnector_enum_list)
 
+static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
+	{ DRM_MODE_TV_MODE_NTSC, "NTSC" },
+	{ DRM_MODE_TV_MODE_NTSC_443, "NTSC-443" },
+	{ DRM_MODE_TV_MODE_NTSC_J, "NTSC-J" },
+	{ DRM_MODE_TV_MODE_PAL, "PAL" },
+	{ DRM_MODE_TV_MODE_PAL_M, "PAL-M" },
+	{ DRM_MODE_TV_MODE_PAL_N, "PAL-N" },
+	{ DRM_MODE_TV_MODE_SECAM, "SECAM" },
+};
+DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
+
 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
@@ -1552,6 +1563,71 @@ EXPORT_SYMBOL(drm_connector_attach_dp_subconnector_property);
  *	infoframe values is done through drm_hdmi_avi_infoframe_content_type().
  */
 
+/*
+ * TODO: Document the properties:
+ *   - left margin
+ *   - right margin
+ *   - top margin
+ *   - bottom margin
+ *   - brightness
+ *   - contrast
+ *   - flicker reduction
+ *   - hue
+ *   - mode
+ *   - overscan
+ *   - saturation
+ *   - select subconnector
+ *   - subconnector
+ */
+/**
+ * DOC: Analog TV Connector Properties
+ *
+ * TV Mode:
+ *	Indicates the TV Mode used on an analog TV connector. The value
+ *	of this property can be one of the following:
+ *
+ *	NTSC:
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding.
+ *
+ *	NTSC-443:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding, but with a color subcarrier
+ *		frequency of 4.43MHz
+ *
+ *	NTSC-J:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding, but with a black level equal to
+ *		the blanking level.
+ *
+ *	PAL:
+ *
+ *		TV Mode is CCIR System B (aka 625-lines) together with
+ *		the PAL Color Encoding.
+ *
+ *	PAL-M:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the PAL Color Encoding.
+ *
+ *	PAL-N:
+ *
+ *		TV Mode is CCIR System N together with the PAL Color
+ *		Encoding, a color subcarrier frequency of 3.58MHz, the
+ *		SECAM color space, and narrower channels than other PAL
+ *		variants.
+ *
+ *	SECAM:
+ *
+ *		TV Mode is CCIR System B (aka 625-lines) together with
+ *		the SECAM Color Encoding.
+ *
+ *	Drivers can set up this property by calling
+ *	drm_mode_create_tv_properties().
+ */
+
 /**
  * drm_connector_attach_content_type_property - attach content-type property
  * @connector: connector to attach content type property on.
@@ -1649,6 +1725,10 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
  * responsible for allocating a list of format names and passing them to
  * this routine.
  *
+ * NOTE: This functions registers the deprecated "mode" connector
+ * property to select the analog TV mode (ie, NTSC, PAL, etc.). New
+ * drivers must use drm_mode_create_tv_properties() instead.
+ *
  * Returns:
  * 0 on success or a negative error code on failure.
  */
@@ -1690,7 +1770,6 @@ int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-
 	if (num_modes) {
 		dev->mode_config.legacy_tv_mode_property =
 			drm_property_create(dev, DRM_MODE_PROP_ENUM,
@@ -1739,6 +1818,47 @@ int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 }
 EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
 
+/**
+ * drm_mode_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @supported_tv_modes: Bitmask of TV modes supported (See DRM_MODE_TV_MODE_*)
+
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int supported_tv_modes)
+{
+	struct drm_prop_enum_list tv_mode_list[DRM_MODE_TV_MODE_MAX];
+	struct drm_property *tv_mode;
+	unsigned int i, len = 0;
+
+	if (dev->mode_config.tv_mode_property)
+		return 0;
+
+	for (i = 0; i < DRM_MODE_TV_MODE_MAX; i++) {
+		if (!(supported_tv_modes & BIT(i)))
+			continue;
+
+		tv_mode_list[len].type = i;
+		tv_mode_list[len].name = drm_get_tv_mode_name(i);
+		len++;
+	}
+
+	tv_mode = drm_property_create_enum(dev, 0, "TV mode",
+					   tv_mode_list, len);
+	if (!tv_mode)
+		return -ENOMEM;
+
+	dev->mode_config.tv_mode_property = tv_mode;
+
+	return drm_mode_create_tv_properties_legacy(dev, 0, NULL);
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
 /**
  * drm_mode_create_scaling_mode_property - create scaling mode property
  * @dev: DRM device
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 5913b8415137..9afc7956fdc6 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -143,6 +143,65 @@ enum subpixel_order {
 
 };
 
+/**
+ * enum drm_connector_tv_mode - Analog TV output mode
+ *
+ * This enum is used to indicate the TV output mode used on an analog TV
+ * connector.
+ *
+ * WARNING: The values of this enum is uABI since they're exposed in the
+ * "TV mode" connector property.
+ */
+enum drm_connector_tv_mode {
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC: CCIR System M (aka 525-lines)
+	 * together with the NTSC Color Encoding.
+	 */
+	DRM_MODE_TV_MODE_NTSC,
+
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC_443: Variant of
+	 * @DRM_MODE_TV_MODE_NTSC. Uses a color subcarrier frequency
+	 * of 4.43 MHz.
+	 */
+	DRM_MODE_TV_MODE_NTSC_443,
+
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC_J: Variant of @DRM_MODE_TV_MODE_NTSC
+	 * used in Japan. Uses a black level equals to the blanking
+	 * level.
+	 */
+	DRM_MODE_TV_MODE_NTSC_J,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL: CCIR System B together with the PAL
+	 * color system.
+	 */
+	DRM_MODE_TV_MODE_PAL,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL_M: CCIR System M (aka 525-lines)
+	 * together with the PAL color encoding
+	 */
+	DRM_MODE_TV_MODE_PAL_M,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL_N: CCIR System N together with the PAL
+	 * color encoding. It uses 625 lines, but has a color subcarrier
+	 * frequency of 3.58MHz, the SECAM color space, and narrower
+	 * channels compared to most of the other PAL variants.
+	 */
+	DRM_MODE_TV_MODE_PAL_N,
+
+	/**
+	 * @DRM_MODE_TV_MODE_SECAM: CCIR System B together with the
+	 * SECAM color system.
+	 */
+	DRM_MODE_TV_MODE_SECAM,
+
+	DRM_MODE_TV_MODE_MAX,
+};
+
 /**
  * struct drm_scrambling: sink's scrambling support.
  */
@@ -696,6 +755,7 @@ struct drm_connector_tv_margins {
  * @subconnector: detected subconnector
  * @margins: TV margins
  * @legacy_mode: Legacy TV mode, driver specific value
+ * @mode: TV mode
  * @brightness: brightness in percent
  * @contrast: contrast in percent
  * @flicker_reduction: flicker reduction in percent
@@ -708,6 +768,7 @@ struct drm_tv_connector_state {
 	enum drm_mode_subconnector subconnector;
 	struct drm_connector_tv_margins margins;
 	unsigned int legacy_mode;
+	unsigned int mode;
 	unsigned int brightness;
 	unsigned int contrast;
 	unsigned int flicker_reduction;
@@ -1797,6 +1858,7 @@ const char *drm_get_subpixel_order_name(enum subpixel_order order);
 const char *drm_get_dpms_name(int val);
 const char *drm_get_dvi_i_subconnector_name(int val);
 const char *drm_get_dvi_i_select_name(int val);
+const char *drm_get_tv_mode_name(int val);
 const char *drm_get_tv_subconnector_name(int val);
 const char *drm_get_tv_select_name(int val);
 const char *drm_get_dp_subconnector_name(int val);
@@ -1810,6 +1872,8 @@ int drm_mode_create_tv_margin_properties(struct drm_device *dev);
 int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 					 unsigned int num_modes,
 					 const char * const modes[]);
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int supported_tv_modes);
 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_connector_attach_content_type_property(struct drm_connector *dev);
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index c47b29e80108..1a8bcc3fd14e 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -716,9 +716,17 @@ struct drm_mode_config {
 	/**
 	 * @legacy_tv_mode_property: Optional TV property to select
 	 * the output TV mode.
+	 *
+	 * Superseeded by @tv_mode_property
 	 */
 	struct drm_property *legacy_tv_mode_property;
 
+	/**
+	 * @tv_mode_property: Optional TV property to select the TV
+	 * standard output on the connector.
+	 */
+	struct drm_property *tv_mode_property;
+
 	/**
 	 * @tv_left_margin_property: Optional TV property to set the left
 	 * margin (expressed in pixels).

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 06/25] drm/connector: Add TV standard property

[Maxime Ripard]

The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.

Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.

Let's create a new enum tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports, and the property
creation function will filter out the modes not supported.

We'll then be able to phase out the older tv mode property.

Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v5:
- Create an analog TV properties documentation section, and document TV
  Mode there instead of the csv file

Changes in v4:
- Add property documentation to kms-properties.csv
- Fix documentation
---
 Documentation/gpu/drm-kms.rst     |   6 ++
 drivers/gpu/drm/drm_atomic_uapi.c |   4 ++
 drivers/gpu/drm/drm_connector.c   | 122 +++++++++++++++++++++++++++++++++++++-
 include/drm/drm_connector.h       |  64 ++++++++++++++++++++
 include/drm/drm_mode_config.h     |   8 +++
 5 files changed, 203 insertions(+), 1 deletion(-)

diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index b4377a545425..321f2f582c64 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -520,6 +520,12 @@ HDMI Specific Connector Properties
 .. kernel-doc:: drivers/gpu/drm/drm_connector.c
    :doc: HDMI connector properties
 
+Analog TV Specific Connector Properties
+----------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_connector.c
+   :doc: Analog TV Connector Properties
+
 Standard CRTC Properties
 ------------------------
 
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 7f2b9a07fbdf..d867e7f9f2cd 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -700,6 +700,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
 		state->tv.margins.bottom = val;
 	} else if (property == config->legacy_tv_mode_property) {
 		state->tv.legacy_mode = val;
+	} else if (property == config->tv_mode_property) {
+		state->tv.mode = val;
 	} else if (property == config->tv_brightness_property) {
 		state->tv.brightness = val;
 	} else if (property == config->tv_contrast_property) {
@@ -810,6 +812,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
 		*val = state->tv.margins.bottom;
 	} else if (property == config->legacy_tv_mode_property) {
 		*val = state->tv.legacy_mode;
+	} else if (property == config->tv_mode_property) {
+		*val = state->tv.mode;
 	} else if (property == config->tv_brightness_property) {
 		*val = state->tv.brightness;
 	} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 06e737ed15f5..07d449736956 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -984,6 +984,17 @@ static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
 DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
 		 drm_dvi_i_subconnector_enum_list)
 
+static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
+	{ DRM_MODE_TV_MODE_NTSC, "NTSC" },
+	{ DRM_MODE_TV_MODE_NTSC_443, "NTSC-443" },
+	{ DRM_MODE_TV_MODE_NTSC_J, "NTSC-J" },
+	{ DRM_MODE_TV_MODE_PAL, "PAL" },
+	{ DRM_MODE_TV_MODE_PAL_M, "PAL-M" },
+	{ DRM_MODE_TV_MODE_PAL_N, "PAL-N" },
+	{ DRM_MODE_TV_MODE_SECAM, "SECAM" },
+};
+DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
+
 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
@@ -1552,6 +1563,71 @@ EXPORT_SYMBOL(drm_connector_attach_dp_subconnector_property);
  *	infoframe values is done through drm_hdmi_avi_infoframe_content_type().
  */
 
+/*
+ * TODO: Document the properties:
+ *   - left margin
+ *   - right margin
+ *   - top margin
+ *   - bottom margin
+ *   - brightness
+ *   - contrast
+ *   - flicker reduction
+ *   - hue
+ *   - mode
+ *   - overscan
+ *   - saturation
+ *   - select subconnector
+ *   - subconnector
+ */
+/**
+ * DOC: Analog TV Connector Properties
+ *
+ * TV Mode:
+ *	Indicates the TV Mode used on an analog TV connector. The value
+ *	of this property can be one of the following:
+ *
+ *	NTSC:
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding.
+ *
+ *	NTSC-443:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding, but with a color subcarrier
+ *		frequency of 4.43MHz
+ *
+ *	NTSC-J:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding, but with a black level equal to
+ *		the blanking level.
+ *
+ *	PAL:
+ *
+ *		TV Mode is CCIR System B (aka 625-lines) together with
+ *		the PAL Color Encoding.
+ *
+ *	PAL-M:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the PAL Color Encoding.
+ *
+ *	PAL-N:
+ *
+ *		TV Mode is CCIR System N together with the PAL Color
+ *		Encoding, a color subcarrier frequency of 3.58MHz, the
+ *		SECAM color space, and narrower channels than other PAL
+ *		variants.
+ *
+ *	SECAM:
+ *
+ *		TV Mode is CCIR System B (aka 625-lines) together with
+ *		the SECAM Color Encoding.
+ *
+ *	Drivers can set up this property by calling
+ *	drm_mode_create_tv_properties().
+ */
+
 /**
  * drm_connector_attach_content_type_property - attach content-type property
  * @connector: connector to attach content type property on.
@@ -1649,6 +1725,10 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
  * responsible for allocating a list of format names and passing them to
  * this routine.
  *
+ * NOTE: This functions registers the deprecated "mode" connector
+ * property to select the analog TV mode (ie, NTSC, PAL, etc.). New
+ * drivers must use drm_mode_create_tv_properties() instead.
+ *
  * Returns:
  * 0 on success or a negative error code on failure.
  */
@@ -1690,7 +1770,6 @@ int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-
 	if (num_modes) {
 		dev->mode_config.legacy_tv_mode_property =
 			drm_property_create(dev, DRM_MODE_PROP_ENUM,
@@ -1739,6 +1818,47 @@ int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 }
 EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
 
+/**
+ * drm_mode_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @supported_tv_modes: Bitmask of TV modes supported (See DRM_MODE_TV_MODE_*)
+
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int supported_tv_modes)
+{
+	struct drm_prop_enum_list tv_mode_list[DRM_MODE_TV_MODE_MAX];
+	struct drm_property *tv_mode;
+	unsigned int i, len = 0;
+
+	if (dev->mode_config.tv_mode_property)
+		return 0;
+
+	for (i = 0; i < DRM_MODE_TV_MODE_MAX; i++) {
+		if (!(supported_tv_modes & BIT(i)))
+			continue;
+
+		tv_mode_list[len].type = i;
+		tv_mode_list[len].name = drm_get_tv_mode_name(i);
+		len++;
+	}
+
+	tv_mode = drm_property_create_enum(dev, 0, "TV mode",
+					   tv_mode_list, len);
+	if (!tv_mode)
+		return -ENOMEM;
+
+	dev->mode_config.tv_mode_property = tv_mode;
+
+	return drm_mode_create_tv_properties_legacy(dev, 0, NULL);
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
 /**
  * drm_mode_create_scaling_mode_property - create scaling mode property
  * @dev: DRM device
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 5913b8415137..9afc7956fdc6 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -143,6 +143,65 @@ enum subpixel_order {
 
 };
 
+/**
+ * enum drm_connector_tv_mode - Analog TV output mode
+ *
+ * This enum is used to indicate the TV output mode used on an analog TV
+ * connector.
+ *
+ * WARNING: The values of this enum is uABI since they're exposed in the
+ * "TV mode" connector property.
+ */
+enum drm_connector_tv_mode {
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC: CCIR System M (aka 525-lines)
+	 * together with the NTSC Color Encoding.
+	 */
+	DRM_MODE_TV_MODE_NTSC,
+
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC_443: Variant of
+	 * @DRM_MODE_TV_MODE_NTSC. Uses a color subcarrier frequency
+	 * of 4.43 MHz.
+	 */
+	DRM_MODE_TV_MODE_NTSC_443,
+
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC_J: Variant of @DRM_MODE_TV_MODE_NTSC
+	 * used in Japan. Uses a black level equals to the blanking
+	 * level.
+	 */
+	DRM_MODE_TV_MODE_NTSC_J,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL: CCIR System B together with the PAL
+	 * color system.
+	 */
+	DRM_MODE_TV_MODE_PAL,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL_M: CCIR System M (aka 525-lines)
+	 * together with the PAL color encoding
+	 */
+	DRM_MODE_TV_MODE_PAL_M,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL_N: CCIR System N together with the PAL
+	 * color encoding. It uses 625 lines, but has a color subcarrier
+	 * frequency of 3.58MHz, the SECAM color space, and narrower
+	 * channels compared to most of the other PAL variants.
+	 */
+	DRM_MODE_TV_MODE_PAL_N,
+
+	/**
+	 * @DRM_MODE_TV_MODE_SECAM: CCIR System B together with the
+	 * SECAM color system.
+	 */
+	DRM_MODE_TV_MODE_SECAM,
+
+	DRM_MODE_TV_MODE_MAX,
+};
+
 /**
  * struct drm_scrambling: sink's scrambling support.
  */
@@ -696,6 +755,7 @@ struct drm_connector_tv_margins {
  * @subconnector: detected subconnector
  * @margins: TV margins
  * @legacy_mode: Legacy TV mode, driver specific value
+ * @mode: TV mode
  * @brightness: brightness in percent
  * @contrast: contrast in percent
  * @flicker_reduction: flicker reduction in percent
@@ -708,6 +768,7 @@ struct drm_tv_connector_state {
 	enum drm_mode_subconnector subconnector;
 	struct drm_connector_tv_margins margins;
 	unsigned int legacy_mode;
+	unsigned int mode;
 	unsigned int brightness;
 	unsigned int contrast;
 	unsigned int flicker_reduction;
@@ -1797,6 +1858,7 @@ const char *drm_get_subpixel_order_name(enum subpixel_order order);
 const char *drm_get_dpms_name(int val);
 const char *drm_get_dvi_i_subconnector_name(int val);
 const char *drm_get_dvi_i_select_name(int val);
+const char *drm_get_tv_mode_name(int val);
 const char *drm_get_tv_subconnector_name(int val);
 const char *drm_get_tv_select_name(int val);
 const char *drm_get_dp_subconnector_name(int val);
@@ -1810,6 +1872,8 @@ int drm_mode_create_tv_margin_properties(struct drm_device *dev);
 int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 					 unsigned int num_modes,
 					 const char * const modes[]);
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int supported_tv_modes);
 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_connector_attach_content_type_property(struct drm_connector *dev);
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index c47b29e80108..1a8bcc3fd14e 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -716,9 +716,17 @@ struct drm_mode_config {
 	/**
 	 * @legacy_tv_mode_property: Optional TV property to select
 	 * the output TV mode.
+	 *
+	 * Superseeded by @tv_mode_property
 	 */
 	struct drm_property *legacy_tv_mode_property;
 
+	/**
+	 * @tv_mode_property: Optional TV property to select the TV
+	 * standard output on the connector.
+	 */
+	struct drm_property *tv_mode_property;
+
 	/**
 	 * @tv_left_margin_property: Optional TV property to set the left
 	 * margin (expressed in pixels).

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 06/25] drm/connector: Add TV standard property

[Maxime Ripard]

The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.

Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.

Let's create a new enum tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports, and the property
creation function will filter out the modes not supported.

We'll then be able to phase out the older tv mode property.

Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v5:
- Create an analog TV properties documentation section, and document TV
  Mode there instead of the csv file

Changes in v4:
- Add property documentation to kms-properties.csv
- Fix documentation
---
 Documentation/gpu/drm-kms.rst     |   6 ++
 drivers/gpu/drm/drm_atomic_uapi.c |   4 ++
 drivers/gpu/drm/drm_connector.c   | 122 +++++++++++++++++++++++++++++++++++++-
 include/drm/drm_connector.h       |  64 ++++++++++++++++++++
 include/drm/drm_mode_config.h     |   8 +++
 5 files changed, 203 insertions(+), 1 deletion(-)

diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index b4377a545425..321f2f582c64 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -520,6 +520,12 @@ HDMI Specific Connector Properties
 .. kernel-doc:: drivers/gpu/drm/drm_connector.c
    :doc: HDMI connector properties
 
+Analog TV Specific Connector Properties
+----------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_connector.c
+   :doc: Analog TV Connector Properties
+
 Standard CRTC Properties
 ------------------------
 
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 7f2b9a07fbdf..d867e7f9f2cd 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -700,6 +700,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
 		state->tv.margins.bottom = val;
 	} else if (property == config->legacy_tv_mode_property) {
 		state->tv.legacy_mode = val;
+	} else if (property == config->tv_mode_property) {
+		state->tv.mode = val;
 	} else if (property == config->tv_brightness_property) {
 		state->tv.brightness = val;
 	} else if (property == config->tv_contrast_property) {
@@ -810,6 +812,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
 		*val = state->tv.margins.bottom;
 	} else if (property == config->legacy_tv_mode_property) {
 		*val = state->tv.legacy_mode;
+	} else if (property == config->tv_mode_property) {
+		*val = state->tv.mode;
 	} else if (property == config->tv_brightness_property) {
 		*val = state->tv.brightness;
 	} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 06e737ed15f5..07d449736956 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -984,6 +984,17 @@ static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
 DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
 		 drm_dvi_i_subconnector_enum_list)
 
+static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
+	{ DRM_MODE_TV_MODE_NTSC, "NTSC" },
+	{ DRM_MODE_TV_MODE_NTSC_443, "NTSC-443" },
+	{ DRM_MODE_TV_MODE_NTSC_J, "NTSC-J" },
+	{ DRM_MODE_TV_MODE_PAL, "PAL" },
+	{ DRM_MODE_TV_MODE_PAL_M, "PAL-M" },
+	{ DRM_MODE_TV_MODE_PAL_N, "PAL-N" },
+	{ DRM_MODE_TV_MODE_SECAM, "SECAM" },
+};
+DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
+
 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
@@ -1552,6 +1563,71 @@ EXPORT_SYMBOL(drm_connector_attach_dp_subconnector_property);
  *	infoframe values is done through drm_hdmi_avi_infoframe_content_type().
  */
 
+/*
+ * TODO: Document the properties:
+ *   - left margin
+ *   - right margin
+ *   - top margin
+ *   - bottom margin
+ *   - brightness
+ *   - contrast
+ *   - flicker reduction
+ *   - hue
+ *   - mode
+ *   - overscan
+ *   - saturation
+ *   - select subconnector
+ *   - subconnector
+ */
+/**
+ * DOC: Analog TV Connector Properties
+ *
+ * TV Mode:
+ *	Indicates the TV Mode used on an analog TV connector. The value
+ *	of this property can be one of the following:
+ *
+ *	NTSC:
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding.
+ *
+ *	NTSC-443:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding, but with a color subcarrier
+ *		frequency of 4.43MHz
+ *
+ *	NTSC-J:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding, but with a black level equal to
+ *		the blanking level.
+ *
+ *	PAL:
+ *
+ *		TV Mode is CCIR System B (aka 625-lines) together with
+ *		the PAL Color Encoding.
+ *
+ *	PAL-M:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the PAL Color Encoding.
+ *
+ *	PAL-N:
+ *
+ *		TV Mode is CCIR System N together with the PAL Color
+ *		Encoding, a color subcarrier frequency of 3.58MHz, the
+ *		SECAM color space, and narrower channels than other PAL
+ *		variants.
+ *
+ *	SECAM:
+ *
+ *		TV Mode is CCIR System B (aka 625-lines) together with
+ *		the SECAM Color Encoding.
+ *
+ *	Drivers can set up this property by calling
+ *	drm_mode_create_tv_properties().
+ */
+
 /**
  * drm_connector_attach_content_type_property - attach content-type property
  * @connector: connector to attach content type property on.
@@ -1649,6 +1725,10 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
  * responsible for allocating a list of format names and passing them to
  * this routine.
  *
+ * NOTE: This functions registers the deprecated "mode" connector
+ * property to select the analog TV mode (ie, NTSC, PAL, etc.). New
+ * drivers must use drm_mode_create_tv_properties() instead.
+ *
  * Returns:
  * 0 on success or a negative error code on failure.
  */
@@ -1690,7 +1770,6 @@ int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-
 	if (num_modes) {
 		dev->mode_config.legacy_tv_mode_property =
 			drm_property_create(dev, DRM_MODE_PROP_ENUM,
@@ -1739,6 +1818,47 @@ int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 }
 EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
 
+/**
+ * drm_mode_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @supported_tv_modes: Bitmask of TV modes supported (See DRM_MODE_TV_MODE_*)
+
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int supported_tv_modes)
+{
+	struct drm_prop_enum_list tv_mode_list[DRM_MODE_TV_MODE_MAX];
+	struct drm_property *tv_mode;
+	unsigned int i, len = 0;
+
+	if (dev->mode_config.tv_mode_property)
+		return 0;
+
+	for (i = 0; i < DRM_MODE_TV_MODE_MAX; i++) {
+		if (!(supported_tv_modes & BIT(i)))
+			continue;
+
+		tv_mode_list[len].type = i;
+		tv_mode_list[len].name = drm_get_tv_mode_name(i);
+		len++;
+	}
+
+	tv_mode = drm_property_create_enum(dev, 0, "TV mode",
+					   tv_mode_list, len);
+	if (!tv_mode)
+		return -ENOMEM;
+
+	dev->mode_config.tv_mode_property = tv_mode;
+
+	return drm_mode_create_tv_properties_legacy(dev, 0, NULL);
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
 /**
  * drm_mode_create_scaling_mode_property - create scaling mode property
  * @dev: DRM device
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 5913b8415137..9afc7956fdc6 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -143,6 +143,65 @@ enum subpixel_order {
 
 };
 
+/**
+ * enum drm_connector_tv_mode - Analog TV output mode
+ *
+ * This enum is used to indicate the TV output mode used on an analog TV
+ * connector.
+ *
+ * WARNING: The values of this enum is uABI since they're exposed in the
+ * "TV mode" connector property.
+ */
+enum drm_connector_tv_mode {
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC: CCIR System M (aka 525-lines)
+	 * together with the NTSC Color Encoding.
+	 */
+	DRM_MODE_TV_MODE_NTSC,
+
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC_443: Variant of
+	 * @DRM_MODE_TV_MODE_NTSC. Uses a color subcarrier frequency
+	 * of 4.43 MHz.
+	 */
+	DRM_MODE_TV_MODE_NTSC_443,
+
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC_J: Variant of @DRM_MODE_TV_MODE_NTSC
+	 * used in Japan. Uses a black level equals to the blanking
+	 * level.
+	 */
+	DRM_MODE_TV_MODE_NTSC_J,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL: CCIR System B together with the PAL
+	 * color system.
+	 */
+	DRM_MODE_TV_MODE_PAL,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL_M: CCIR System M (aka 525-lines)
+	 * together with the PAL color encoding
+	 */
+	DRM_MODE_TV_MODE_PAL_M,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL_N: CCIR System N together with the PAL
+	 * color encoding. It uses 625 lines, but has a color subcarrier
+	 * frequency of 3.58MHz, the SECAM color space, and narrower
+	 * channels compared to most of the other PAL variants.
+	 */
+	DRM_MODE_TV_MODE_PAL_N,
+
+	/**
+	 * @DRM_MODE_TV_MODE_SECAM: CCIR System B together with the
+	 * SECAM color system.
+	 */
+	DRM_MODE_TV_MODE_SECAM,
+
+	DRM_MODE_TV_MODE_MAX,
+};
+
 /**
  * struct drm_scrambling: sink's scrambling support.
  */
@@ -696,6 +755,7 @@ struct drm_connector_tv_margins {
  * @subconnector: detected subconnector
  * @margins: TV margins
  * @legacy_mode: Legacy TV mode, driver specific value
+ * @mode: TV mode
  * @brightness: brightness in percent
  * @contrast: contrast in percent
  * @flicker_reduction: flicker reduction in percent
@@ -708,6 +768,7 @@ struct drm_tv_connector_state {
 	enum drm_mode_subconnector subconnector;
 	struct drm_connector_tv_margins margins;
 	unsigned int legacy_mode;
+	unsigned int mode;
 	unsigned int brightness;
 	unsigned int contrast;
 	unsigned int flicker_reduction;
@@ -1797,6 +1858,7 @@ const char *drm_get_subpixel_order_name(enum subpixel_order order);
 const char *drm_get_dpms_name(int val);
 const char *drm_get_dvi_i_subconnector_name(int val);
 const char *drm_get_dvi_i_select_name(int val);
+const char *drm_get_tv_mode_name(int val);
 const char *drm_get_tv_subconnector_name(int val);
 const char *drm_get_tv_select_name(int val);
 const char *drm_get_dp_subconnector_name(int val);
@@ -1810,6 +1872,8 @@ int drm_mode_create_tv_margin_properties(struct drm_device *dev);
 int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 					 unsigned int num_modes,
 					 const char * const modes[]);
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int supported_tv_modes);
 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_connector_attach_content_type_property(struct drm_connector *dev);
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index c47b29e80108..1a8bcc3fd14e 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -716,9 +716,17 @@ struct drm_mode_config {
 	/**
 	 * @legacy_tv_mode_property: Optional TV property to select
 	 * the output TV mode.
+	 *
+	 * Superseeded by @tv_mode_property
 	 */
 	struct drm_property *legacy_tv_mode_property;
 
+	/**
+	 * @tv_mode_property: Optional TV property to select the TV
+	 * standard output on the connector.
+	 */
+	struct drm_property *tv_mode_property;
+
 	/**
 	 * @tv_left_margin_property: Optional TV property to set the left
 	 * margin (expressed in pixels).

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 06/25] drm/connector: Add TV standard property

[Maxime Ripard]

The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.

Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.

Let's create a new enum tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports, and the property
creation function will filter out the modes not supported.

We'll then be able to phase out the older tv mode property.

Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v5:
- Create an analog TV properties documentation section, and document TV
  Mode there instead of the csv file

Changes in v4:
- Add property documentation to kms-properties.csv
- Fix documentation
---
 Documentation/gpu/drm-kms.rst     |   6 ++
 drivers/gpu/drm/drm_atomic_uapi.c |   4 ++
 drivers/gpu/drm/drm_connector.c   | 122 +++++++++++++++++++++++++++++++++++++-
 include/drm/drm_connector.h       |  64 ++++++++++++++++++++
 include/drm/drm_mode_config.h     |   8 +++
 5 files changed, 203 insertions(+), 1 deletion(-)

diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index b4377a545425..321f2f582c64 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -520,6 +520,12 @@ HDMI Specific Connector Properties
 .. kernel-doc:: drivers/gpu/drm/drm_connector.c
    :doc: HDMI connector properties
 
+Analog TV Specific Connector Properties
+----------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_connector.c
+   :doc: Analog TV Connector Properties
+
 Standard CRTC Properties
 ------------------------
 
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 7f2b9a07fbdf..d867e7f9f2cd 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -700,6 +700,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
 		state->tv.margins.bottom = val;
 	} else if (property == config->legacy_tv_mode_property) {
 		state->tv.legacy_mode = val;
+	} else if (property == config->tv_mode_property) {
+		state->tv.mode = val;
 	} else if (property == config->tv_brightness_property) {
 		state->tv.brightness = val;
 	} else if (property == config->tv_contrast_property) {
@@ -810,6 +812,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
 		*val = state->tv.margins.bottom;
 	} else if (property == config->legacy_tv_mode_property) {
 		*val = state->tv.legacy_mode;
+	} else if (property == config->tv_mode_property) {
+		*val = state->tv.mode;
 	} else if (property == config->tv_brightness_property) {
 		*val = state->tv.brightness;
 	} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 06e737ed15f5..07d449736956 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -984,6 +984,17 @@ static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
 DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
 		 drm_dvi_i_subconnector_enum_list)
 
+static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
+	{ DRM_MODE_TV_MODE_NTSC, "NTSC" },
+	{ DRM_MODE_TV_MODE_NTSC_443, "NTSC-443" },
+	{ DRM_MODE_TV_MODE_NTSC_J, "NTSC-J" },
+	{ DRM_MODE_TV_MODE_PAL, "PAL" },
+	{ DRM_MODE_TV_MODE_PAL_M, "PAL-M" },
+	{ DRM_MODE_TV_MODE_PAL_N, "PAL-N" },
+	{ DRM_MODE_TV_MODE_SECAM, "SECAM" },
+};
+DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
+
 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
@@ -1552,6 +1563,71 @@ EXPORT_SYMBOL(drm_connector_attach_dp_subconnector_property);
  *	infoframe values is done through drm_hdmi_avi_infoframe_content_type().
  */
 
+/*
+ * TODO: Document the properties:
+ *   - left margin
+ *   - right margin
+ *   - top margin
+ *   - bottom margin
+ *   - brightness
+ *   - contrast
+ *   - flicker reduction
+ *   - hue
+ *   - mode
+ *   - overscan
+ *   - saturation
+ *   - select subconnector
+ *   - subconnector
+ */
+/**
+ * DOC: Analog TV Connector Properties
+ *
+ * TV Mode:
+ *	Indicates the TV Mode used on an analog TV connector. The value
+ *	of this property can be one of the following:
+ *
+ *	NTSC:
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding.
+ *
+ *	NTSC-443:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding, but with a color subcarrier
+ *		frequency of 4.43MHz
+ *
+ *	NTSC-J:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the NTSC Color Encoding, but with a black level equal to
+ *		the blanking level.
+ *
+ *	PAL:
+ *
+ *		TV Mode is CCIR System B (aka 625-lines) together with
+ *		the PAL Color Encoding.
+ *
+ *	PAL-M:
+ *
+ *		TV Mode is CCIR System M (aka 525-lines) together with
+ *		the PAL Color Encoding.
+ *
+ *	PAL-N:
+ *
+ *		TV Mode is CCIR System N together with the PAL Color
+ *		Encoding, a color subcarrier frequency of 3.58MHz, the
+ *		SECAM color space, and narrower channels than other PAL
+ *		variants.
+ *
+ *	SECAM:
+ *
+ *		TV Mode is CCIR System B (aka 625-lines) together with
+ *		the SECAM Color Encoding.
+ *
+ *	Drivers can set up this property by calling
+ *	drm_mode_create_tv_properties().
+ */
+
 /**
  * drm_connector_attach_content_type_property - attach content-type property
  * @connector: connector to attach content type property on.
@@ -1649,6 +1725,10 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
  * responsible for allocating a list of format names and passing them to
  * this routine.
  *
+ * NOTE: This functions registers the deprecated "mode" connector
+ * property to select the analog TV mode (ie, NTSC, PAL, etc.). New
+ * drivers must use drm_mode_create_tv_properties() instead.
+ *
  * Returns:
  * 0 on success or a negative error code on failure.
  */
@@ -1690,7 +1770,6 @@ int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 	if (drm_mode_create_tv_margin_properties(dev))
 		goto nomem;
 
-
 	if (num_modes) {
 		dev->mode_config.legacy_tv_mode_property =
 			drm_property_create(dev, DRM_MODE_PROP_ENUM,
@@ -1739,6 +1818,47 @@ int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 }
 EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
 
+/**
+ * drm_mode_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @supported_tv_modes: Bitmask of TV modes supported (See DRM_MODE_TV_MODE_*)
+
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int supported_tv_modes)
+{
+	struct drm_prop_enum_list tv_mode_list[DRM_MODE_TV_MODE_MAX];
+	struct drm_property *tv_mode;
+	unsigned int i, len = 0;
+
+	if (dev->mode_config.tv_mode_property)
+		return 0;
+
+	for (i = 0; i < DRM_MODE_TV_MODE_MAX; i++) {
+		if (!(supported_tv_modes & BIT(i)))
+			continue;
+
+		tv_mode_list[len].type = i;
+		tv_mode_list[len].name = drm_get_tv_mode_name(i);
+		len++;
+	}
+
+	tv_mode = drm_property_create_enum(dev, 0, "TV mode",
+					   tv_mode_list, len);
+	if (!tv_mode)
+		return -ENOMEM;
+
+	dev->mode_config.tv_mode_property = tv_mode;
+
+	return drm_mode_create_tv_properties_legacy(dev, 0, NULL);
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
 /**
  * drm_mode_create_scaling_mode_property - create scaling mode property
  * @dev: DRM device
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 5913b8415137..9afc7956fdc6 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -143,6 +143,65 @@ enum subpixel_order {
 
 };
 
+/**
+ * enum drm_connector_tv_mode - Analog TV output mode
+ *
+ * This enum is used to indicate the TV output mode used on an analog TV
+ * connector.
+ *
+ * WARNING: The values of this enum is uABI since they're exposed in the
+ * "TV mode" connector property.
+ */
+enum drm_connector_tv_mode {
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC: CCIR System M (aka 525-lines)
+	 * together with the NTSC Color Encoding.
+	 */
+	DRM_MODE_TV_MODE_NTSC,
+
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC_443: Variant of
+	 * @DRM_MODE_TV_MODE_NTSC. Uses a color subcarrier frequency
+	 * of 4.43 MHz.
+	 */
+	DRM_MODE_TV_MODE_NTSC_443,
+
+	/**
+	 * @DRM_MODE_TV_MODE_NTSC_J: Variant of @DRM_MODE_TV_MODE_NTSC
+	 * used in Japan. Uses a black level equals to the blanking
+	 * level.
+	 */
+	DRM_MODE_TV_MODE_NTSC_J,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL: CCIR System B together with the PAL
+	 * color system.
+	 */
+	DRM_MODE_TV_MODE_PAL,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL_M: CCIR System M (aka 525-lines)
+	 * together with the PAL color encoding
+	 */
+	DRM_MODE_TV_MODE_PAL_M,
+
+	/**
+	 * @DRM_MODE_TV_MODE_PAL_N: CCIR System N together with the PAL
+	 * color encoding. It uses 625 lines, but has a color subcarrier
+	 * frequency of 3.58MHz, the SECAM color space, and narrower
+	 * channels compared to most of the other PAL variants.
+	 */
+	DRM_MODE_TV_MODE_PAL_N,
+
+	/**
+	 * @DRM_MODE_TV_MODE_SECAM: CCIR System B together with the
+	 * SECAM color system.
+	 */
+	DRM_MODE_TV_MODE_SECAM,
+
+	DRM_MODE_TV_MODE_MAX,
+};
+
 /**
  * struct drm_scrambling: sink's scrambling support.
  */
@@ -696,6 +755,7 @@ struct drm_connector_tv_margins {
  * @subconnector: detected subconnector
  * @margins: TV margins
  * @legacy_mode: Legacy TV mode, driver specific value
+ * @mode: TV mode
  * @brightness: brightness in percent
  * @contrast: contrast in percent
  * @flicker_reduction: flicker reduction in percent
@@ -708,6 +768,7 @@ struct drm_tv_connector_state {
 	enum drm_mode_subconnector subconnector;
 	struct drm_connector_tv_margins margins;
 	unsigned int legacy_mode;
+	unsigned int mode;
 	unsigned int brightness;
 	unsigned int contrast;
 	unsigned int flicker_reduction;
@@ -1797,6 +1858,7 @@ const char *drm_get_subpixel_order_name(enum subpixel_order order);
 const char *drm_get_dpms_name(int val);
 const char *drm_get_dvi_i_subconnector_name(int val);
 const char *drm_get_dvi_i_select_name(int val);
+const char *drm_get_tv_mode_name(int val);
 const char *drm_get_tv_subconnector_name(int val);
 const char *drm_get_tv_select_name(int val);
 const char *drm_get_dp_subconnector_name(int val);
@@ -1810,6 +1872,8 @@ int drm_mode_create_tv_margin_properties(struct drm_device *dev);
 int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
 					 unsigned int num_modes,
 					 const char * const modes[]);
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int supported_tv_modes);
 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_connector_attach_content_type_property(struct drm_connector *dev);
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index c47b29e80108..1a8bcc3fd14e 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -716,9 +716,17 @@ struct drm_mode_config {
 	/**
 	 * @legacy_tv_mode_property: Optional TV property to select
 	 * the output TV mode.
+	 *
+	 * Superseeded by @tv_mode_property
 	 */
 	struct drm_property *legacy_tv_mode_property;
 
+	/**
+	 * @tv_mode_property: Optional TV property to select the TV
+	 * standard output on the connector.
+	 */
+	struct drm_property *tv_mode_property;
+
 	/**
 	 * @tv_left_margin_property: Optional TV property to set the left
 	 * margin (expressed in pixels).

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 07/25] drm/modes: Add a function to generate analog display modes

[Maxime Ripard]

Multiple drivers (meson, vc4, sun4i) define analog TV 525-lines and
625-lines modes in their drivers.

Since those modes are fairly standard, and that we'll need to use them
in more places in the future, it makes sense to move their definition
into the core framework.

However, analog display usually have fairly loose timings requirements,
the only discrete parameters being the total number of lines and pixel
clock frequency. Thus, we created a function that will create a display
mode from the standard, the pixel frequency and the active area.

Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Rename the tests
- Switch to kunit_test_suite

Changes in v6:
- Fix typo

Changes in v4:
- Reworded the line length check comment
- Switch to HZ_PER_KHZ in tests
- Use previous timing to fill our mode
- Move the number of lines check earlier
---
 drivers/gpu/drm/drm_modes.c            | 474 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/tests/Makefile         |   1 +
 drivers/gpu/drm/tests/drm_modes_test.c | 142 ++++++++++
 include/drm/drm_modes.h                |  17 ++
 4 files changed, 634 insertions(+)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 5d4ac79381c4..71c050c3ee6b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -116,6 +116,480 @@ void drm_mode_probed_add(struct drm_connector *connector,
 }
 EXPORT_SYMBOL(drm_mode_probed_add);
 
+enum drm_mode_analog {
+	DRM_MODE_ANALOG_NTSC, /* 525 lines, 60Hz */
+	DRM_MODE_ANALOG_PAL, /* 625 lines, 50Hz */
+};
+
+/*
+ * The timings come from:
+ * - https://web.archive.org/web/20220406232708/http://www.kolumbus.fi/pami1/video/pal_ntsc.html
+ * - https://web.archive.org/web/20220406124914/http://martin.hinner.info/vga/pal.html
+ * - https://web.archive.org/web/20220609202433/http://www.batsocks.co.uk/readme/video_timing.htm
+ */
+#define NTSC_LINE_DURATION_NS		63556U
+#define NTSC_LINES_NUMBER		525
+
+#define NTSC_HBLK_DURATION_TYP_NS	10900U
+#define NTSC_HBLK_DURATION_MIN_NS	(NTSC_HBLK_DURATION_TYP_NS - 200)
+#define NTSC_HBLK_DURATION_MAX_NS	(NTSC_HBLK_DURATION_TYP_NS + 200)
+
+#define NTSC_HACT_DURATION_TYP_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_TYP_NS)
+#define NTSC_HACT_DURATION_MIN_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_MAX_NS)
+#define NTSC_HACT_DURATION_MAX_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_MIN_NS)
+
+#define NTSC_HFP_DURATION_TYP_NS	1500
+#define NTSC_HFP_DURATION_MIN_NS	1270
+#define NTSC_HFP_DURATION_MAX_NS	2220
+
+#define NTSC_HSLEN_DURATION_TYP_NS	4700
+#define NTSC_HSLEN_DURATION_MIN_NS	(NTSC_HSLEN_DURATION_TYP_NS - 100)
+#define NTSC_HSLEN_DURATION_MAX_NS	(NTSC_HSLEN_DURATION_TYP_NS + 100)
+
+#define NTSC_HBP_DURATION_TYP_NS	4700
+
+/*
+ * I couldn't find the actual tolerance for the back porch, so let's
+ * just reuse the sync length ones.
+ */
+#define NTSC_HBP_DURATION_MIN_NS	(NTSC_HBP_DURATION_TYP_NS - 100)
+#define NTSC_HBP_DURATION_MAX_NS	(NTSC_HBP_DURATION_TYP_NS + 100)
+
+#define PAL_LINE_DURATION_NS		64000U
+#define PAL_LINES_NUMBER		625
+
+#define PAL_HACT_DURATION_TYP_NS	51950U
+#define PAL_HACT_DURATION_MIN_NS	(PAL_HACT_DURATION_TYP_NS - 100)
+#define PAL_HACT_DURATION_MAX_NS	(PAL_HACT_DURATION_TYP_NS + 400)
+
+#define PAL_HBLK_DURATION_TYP_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_TYP_NS)
+#define PAL_HBLK_DURATION_MIN_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_MAX_NS)
+#define PAL_HBLK_DURATION_MAX_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_MIN_NS)
+
+#define PAL_HFP_DURATION_TYP_NS		1650
+#define PAL_HFP_DURATION_MIN_NS		(PAL_HFP_DURATION_TYP_NS - 100)
+#define PAL_HFP_DURATION_MAX_NS		(PAL_HFP_DURATION_TYP_NS + 400)
+
+#define PAL_HSLEN_DURATION_TYP_NS	4700
+#define PAL_HSLEN_DURATION_MIN_NS	(PAL_HSLEN_DURATION_TYP_NS - 200)
+#define PAL_HSLEN_DURATION_MAX_NS	(PAL_HSLEN_DURATION_TYP_NS + 200)
+
+#define PAL_HBP_DURATION_TYP_NS		5700
+#define PAL_HBP_DURATION_MIN_NS		(PAL_HBP_DURATION_TYP_NS - 200)
+#define PAL_HBP_DURATION_MAX_NS		(PAL_HBP_DURATION_TYP_NS + 200)
+
+struct analog_param_field {
+	unsigned int even, odd;
+};
+
+#define PARAM_FIELD(_odd, _even)		\
+	{ .even = _even, .odd = _odd }
+
+struct analog_param_range {
+	unsigned int	min, typ, max;
+};
+
+#define PARAM_RANGE(_min, _typ, _max)		\
+	{ .min = _min, .typ = _typ, .max = _max }
+
+struct analog_parameters {
+	unsigned int			num_lines;
+	unsigned int			line_duration_ns;
+
+	struct analog_param_range	hact_ns;
+	struct analog_param_range	hfp_ns;
+	struct analog_param_range	hslen_ns;
+	struct analog_param_range	hbp_ns;
+	struct analog_param_range	hblk_ns;
+
+	unsigned int			bt601_hfp;
+
+	struct analog_param_field	vfp_lines;
+	struct analog_param_field	vslen_lines;
+	struct analog_param_field	vbp_lines;
+};
+
+#define TV_MODE_PARAMETER(_mode, _lines, _line_dur, _hact, _hfp, _hslen, _hbp, _hblk, _bt601_hfp, _vfp, _vslen, _vbp) \
+	[_mode] = {							\
+		.num_lines = _lines,					\
+		.line_duration_ns = _line_dur,				\
+		.hact_ns = _hact,					\
+		.hfp_ns = _hfp,						\
+		.hslen_ns = _hslen,					\
+		.hbp_ns = _hbp,						\
+		.hblk_ns = _hblk,					\
+		.bt601_hfp = _bt601_hfp,				\
+		.vfp_lines = _vfp,					\
+		.vslen_lines = _vslen,					\
+		.vbp_lines = _vbp,					\
+	}
+
+const static struct analog_parameters tv_modes_parameters[] = {
+	TV_MODE_PARAMETER(DRM_MODE_ANALOG_NTSC,
+			  NTSC_LINES_NUMBER,
+			  NTSC_LINE_DURATION_NS,
+			  PARAM_RANGE(NTSC_HACT_DURATION_MIN_NS,
+				      NTSC_HACT_DURATION_TYP_NS,
+				      NTSC_HACT_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HFP_DURATION_MIN_NS,
+				      NTSC_HFP_DURATION_TYP_NS,
+				      NTSC_HFP_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HSLEN_DURATION_MIN_NS,
+				      NTSC_HSLEN_DURATION_TYP_NS,
+				      NTSC_HSLEN_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HBP_DURATION_MIN_NS,
+				      NTSC_HBP_DURATION_TYP_NS,
+				      NTSC_HBP_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HBLK_DURATION_MIN_NS,
+				      NTSC_HBLK_DURATION_TYP_NS,
+				      NTSC_HBLK_DURATION_MAX_NS),
+			  16,
+			  PARAM_FIELD(3, 3),
+			  PARAM_FIELD(3, 3),
+			  PARAM_FIELD(16, 17)),
+	TV_MODE_PARAMETER(DRM_MODE_ANALOG_PAL,
+			  PAL_LINES_NUMBER,
+			  PAL_LINE_DURATION_NS,
+			  PARAM_RANGE(PAL_HACT_DURATION_MIN_NS,
+				      PAL_HACT_DURATION_TYP_NS,
+				      PAL_HACT_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HFP_DURATION_MIN_NS,
+				      PAL_HFP_DURATION_TYP_NS,
+				      PAL_HFP_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HSLEN_DURATION_MIN_NS,
+				      PAL_HSLEN_DURATION_TYP_NS,
+				      PAL_HSLEN_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HBP_DURATION_MIN_NS,
+				      PAL_HBP_DURATION_TYP_NS,
+				      PAL_HBP_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HBLK_DURATION_MIN_NS,
+				      PAL_HBLK_DURATION_TYP_NS,
+				      PAL_HBLK_DURATION_MAX_NS),
+			  12,
+
+			  /*
+			   * The front porch is actually 6 short sync
+			   * pulses for the even field, and 5 for the
+			   * odd field. Each sync takes half a life so
+			   * the odd field front porch is shorter by
+			   * half a line.
+			   *
+			   * In progressive, we're supposed to use 6
+			   * pulses, so we're fine there
+			   */
+			  PARAM_FIELD(3, 2),
+
+			  /*
+			   * The vsync length is 5 long sync pulses,
+			   * each field taking half a line. We're
+			   * shorter for both fields by half a line.
+			   *
+			   * In progressive, we're supposed to use 5
+			   * pulses, so we're off by half
+			   * a line.
+			   *
+			   * In interlace, we're now off by half a line
+			   * for the even field and one line for the odd
+			   * field.
+			   */
+			  PARAM_FIELD(3, 3),
+
+			  /*
+			   * The back porch starts with post-equalizing
+			   * pulses, consisting in 5 short sync pulses
+			   * for the even field, 4 for the odd field. In
+			   * progressive, it's 5 short syncs.
+			   *
+			   * In progressive, we thus have 2.5 lines,
+			   * plus the 0.5 line we were missing
+			   * previously, so we should use 3 lines.
+			   *
+			   * In interlace, the even field is in the
+			   * exact same case than progressive. For the
+			   * odd field, we should be using 2 lines but
+			   * we're one line short, so we'll make up for
+			   * it here by using 3.
+			   *
+			   * The entire blanking area is supposed to
+			   * take 25 lines, so we also need to account
+			   * for the rest of the blanking area that
+			   * can't be in either the front porch or sync
+			   * period.
+			   */
+			  PARAM_FIELD(19, 20)),
+};
+
+static int fill_analog_mode(struct drm_device *dev,
+			    struct drm_display_mode *mode,
+			    const struct analog_parameters *params,
+			    unsigned long pixel_clock_hz,
+			    unsigned int hactive,
+			    unsigned int vactive,
+			    bool interlace)
+{
+	unsigned long pixel_duration_ns = NSEC_PER_SEC / pixel_clock_hz;
+	unsigned int htotal, vtotal;
+	unsigned int max_hact, hact_duration_ns;
+	unsigned int hblk, hblk_duration_ns;
+	unsigned int hfp, hfp_duration_ns;
+	unsigned int hslen, hslen_duration_ns;
+	unsigned int hbp, hbp_duration_ns;
+	unsigned int porches, porches_duration_ns;
+	unsigned int vfp, vfp_min;
+	unsigned int vbp, vbp_min;
+	unsigned int vslen;
+	bool bt601 = false;
+	int porches_rem;
+	u64 result;
+
+	drm_dbg_kms(dev,
+		    "Generating a %ux%u%c, %u-line mode with a %lu kHz clock\n",
+		    hactive, vactive,
+		    interlace ? 'i' : 'p',
+		    params->num_lines,
+		    pixel_clock_hz / 1000);
+
+	max_hact = params->hact_ns.max / pixel_duration_ns;
+	if (pixel_clock_hz == 13500000 && hactive > max_hact && hactive <= 720) {
+		drm_dbg_kms(dev, "Trying to generate a BT.601 mode. Disabling checks.\n");
+		bt601 = true;
+	}
+
+	/*
+	 * Our pixel duration is going to be round down by the division,
+	 * so rounding up is probably going to introduce even more
+	 * deviation.
+	 */
+	result = (u64)params->line_duration_ns * pixel_clock_hz;
+	do_div(result, NSEC_PER_SEC);
+	htotal = result;
+
+	drm_dbg_kms(dev, "Total Horizontal Number of Pixels: %u\n", htotal);
+
+	hact_duration_ns = hactive * pixel_duration_ns;
+	if (!bt601 &&
+	    (hact_duration_ns < params->hact_ns.min ||
+	     hact_duration_ns > params->hact_ns.max)) {
+		DRM_ERROR("Invalid horizontal active area duration: %uns (min: %u, max %u)\n",
+			  hact_duration_ns, params->hact_ns.min, params->hact_ns.max);
+		return -EINVAL;
+	}
+
+	hblk = htotal - hactive;
+	drm_dbg_kms(dev, "Horizontal Blanking Period: %u\n", hblk);
+
+	hblk_duration_ns = hblk * pixel_duration_ns;
+	if (!bt601 &&
+	    (hblk_duration_ns < params->hblk_ns.min ||
+	     hblk_duration_ns > params->hblk_ns.max)) {
+		DRM_ERROR("Invalid horizontal blanking duration: %uns (min: %u, max %u)\n",
+			  hblk_duration_ns, params->hblk_ns.min, params->hblk_ns.max);
+		return -EINVAL;
+	}
+
+	hslen = DIV_ROUND_UP(params->hslen_ns.typ, pixel_duration_ns);
+	drm_dbg_kms(dev, "Horizontal Sync Period: %u\n", hslen);
+
+	hslen_duration_ns = hslen * pixel_duration_ns;
+	if (!bt601 &&
+	    (hslen_duration_ns < params->hslen_ns.min ||
+	     hslen_duration_ns > params->hslen_ns.max)) {
+		DRM_ERROR("Invalid horizontal sync duration: %uns (min: %u, max %u)\n",
+			  hslen_duration_ns, params->hslen_ns.min, params->hslen_ns.max);
+		return -EINVAL;
+	}
+
+	porches = hblk - hslen;
+	drm_dbg_kms(dev, "Remaining horizontal pixels for both porches: %u\n", porches);
+
+	porches_duration_ns = porches * pixel_duration_ns;
+	if (!bt601 &&
+	    (porches_duration_ns > (params->hfp_ns.max + params->hbp_ns.max) ||
+	     porches_duration_ns < (params->hfp_ns.min + params->hbp_ns.min))) {
+		DRM_ERROR("Invalid horizontal porches duration: %uns\n", porches_duration_ns);
+		return -EINVAL;
+	}
+
+	if (bt601) {
+		hfp = params->bt601_hfp;
+	} else {
+		unsigned int hfp_min = DIV_ROUND_UP(params->hfp_ns.min,
+						    pixel_duration_ns);
+		unsigned int hbp_min = DIV_ROUND_UP(params->hbp_ns.min,
+						    pixel_duration_ns);
+		 int porches_rem = porches - hfp_min - hbp_min;
+
+		hfp = hfp_min + DIV_ROUND_UP(porches_rem, 2);
+	}
+
+	drm_dbg_kms(dev, "Horizontal Front Porch: %u\n", hfp);
+
+	hfp_duration_ns = hfp * pixel_duration_ns;
+	if (!bt601 &&
+	    (hfp_duration_ns < params->hfp_ns.min ||
+	     hfp_duration_ns > params->hfp_ns.max)) {
+		DRM_ERROR("Invalid horizontal front porch duration: %uns (min: %u, max %u)\n",
+			  hfp_duration_ns, params->hfp_ns.min, params->hfp_ns.max);
+		return -EINVAL;
+	}
+
+	hbp = porches - hfp;
+	drm_dbg_kms(dev, "Horizontal Back Porch: %u\n", hbp);
+
+	hbp_duration_ns = hbp * pixel_duration_ns;
+	if (!bt601 &&
+	    (hbp_duration_ns < params->hbp_ns.min ||
+	     hbp_duration_ns > params->hbp_ns.max)) {
+		DRM_ERROR("Invalid horizontal back porch duration: %uns (min: %u, max %u)\n",
+			  hbp_duration_ns, params->hbp_ns.min, params->hbp_ns.max);
+		return -EINVAL;
+	}
+
+	if (htotal != (hactive + hfp + hslen + hbp))
+		return -EINVAL;
+
+	mode->clock = pixel_clock_hz / 1000;
+	mode->hdisplay = hactive;
+	mode->hsync_start = mode->hdisplay + hfp;
+	mode->hsync_end = mode->hsync_start + hslen;
+	mode->htotal = mode->hsync_end + hbp;
+
+	if (interlace) {
+		vfp_min = params->vfp_lines.even + params->vfp_lines.odd;
+		vbp_min = params->vbp_lines.even + params->vbp_lines.odd;
+		vslen = params->vslen_lines.even + params->vslen_lines.odd;
+	} else {
+		/*
+		 * By convention, NTSC (aka 525/60) systems start with
+		 * the even field, but PAL (aka 625/50) systems start
+		 * with the odd one.
+		 *
+		 * PAL systems also have asymetric timings between the
+		 * even and odd field, while NTSC is symetric.
+		 *
+		 * Moreover, if we want to create a progressive mode for
+		 * PAL, we need to use the odd field timings.
+		 *
+		 * Since odd == even for NTSC, we can just use the odd
+		 * one all the time to simplify the code a bit.
+		 */
+		vfp_min = params->vfp_lines.odd;
+		vbp_min = params->vbp_lines.odd;
+		vslen = params->vslen_lines.odd;
+	}
+
+	drm_dbg_kms(dev, "Vertical Sync Period: %u\n", vslen);
+
+	porches = params->num_lines - vactive - vslen;
+	drm_dbg_kms(dev, "Remaining vertical pixels for both porches: %u\n", porches);
+
+	porches_rem = porches - vfp_min - vbp_min;
+	vfp = vfp_min + (porches_rem / 2);
+	drm_dbg_kms(dev, "Vertical Front Porch: %u\n", vfp);
+
+	vbp = porches - vfp;
+	drm_dbg_kms(dev, "Vertical Back Porch: %u\n", vbp);
+
+	vtotal = vactive + vfp + vslen + vbp;
+	if (params->num_lines != vtotal) {
+		DRM_ERROR("Invalid vertical total: %upx (expected %upx)\n",
+			  vtotal, params->num_lines);
+		return -EINVAL;
+	}
+
+	mode->vdisplay = vactive;
+	mode->vsync_start = mode->vdisplay + vfp;
+	mode->vsync_end = mode->vsync_start + vslen;
+	mode->vtotal = mode->vsync_end + vbp;
+
+	if (mode->vtotal != params->num_lines)
+		return -EINVAL;
+
+	mode->type = DRM_MODE_TYPE_DRIVER;
+	mode->flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC;
+	if (interlace)
+		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+	drm_mode_set_name(mode);
+
+	drm_dbg_kms(dev, "Generated mode " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
+
+	return 0;
+}
+
+/**
+ * drm_analog_tv_mode - create a display mode for an analog TV
+ * @dev: drm device
+ * @tv_mode: TV Mode standard to create a mode for. See DRM_MODE_TV_MODE_*.
+ * @pixel_clock_hz: Pixel Clock Frequency, in Hertz
+ * @hdisplay: hdisplay size
+ * @vdisplay: vdisplay size
+ * @interlace: whether to compute an interlaced mode
+ *
+ * This function creates a struct drm_display_mode instance suited for
+ * an analog TV output, for one of the usual analog TV mode.
+ *
+ * Note that @hdisplay is larger than the usual constraints for the PAL
+ * and NTSC timings, and we'll choose to ignore most timings constraints
+ * to reach those resolutions.
+ *
+ * Returns:
+ *
+ * A pointer to the mode, allocated with drm_mode_create(). Returns NULL
+ * on error.
+ */
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+					    enum drm_connector_tv_mode tv_mode,
+					    unsigned long pixel_clock_hz,
+					    unsigned int hdisplay,
+					    unsigned int vdisplay,
+					    bool interlace)
+{
+	struct drm_display_mode *mode;
+	enum drm_mode_analog analog;
+	int ret;
+
+	switch (tv_mode) {
+	case DRM_MODE_TV_MODE_NTSC:
+		fallthrough;
+	case DRM_MODE_TV_MODE_NTSC_443:
+		fallthrough;
+	case DRM_MODE_TV_MODE_NTSC_J:
+		fallthrough;
+	case DRM_MODE_TV_MODE_PAL_M:
+		analog = DRM_MODE_ANALOG_NTSC;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL:
+		fallthrough;
+	case DRM_MODE_TV_MODE_PAL_N:
+		fallthrough;
+	case DRM_MODE_TV_MODE_SECAM:
+		analog = DRM_MODE_ANALOG_PAL;
+		break;
+
+	default:
+		return NULL;
+	}
+
+	mode = drm_mode_create(dev);
+	if (!mode)
+		return NULL;
+
+	ret = fill_analog_mode(dev, mode,
+			       &tv_modes_parameters[analog],
+			       pixel_clock_hz, hdisplay, vdisplay, interlace);
+	if (ret)
+		goto err_free_mode;
+
+	return mode;
+
+err_free_mode:
+	drm_mode_destroy(dev, mode);
+	return NULL;
+}
+EXPORT_SYMBOL(drm_analog_tv_mode);
+
 /**
  * drm_cvt_mode -create a modeline based on the CVT algorithm
  * @dev: drm device
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b29ef1085cad..b22ac96fdd65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -10,5 +10,6 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_framebuffer_test.o \
 	drm_kunit_helpers.o \
 	drm_mm_test.o \
+	drm_modes_test.o \
 	drm_plane_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_modes_test.c b/drivers/gpu/drm/tests/drm_modes_test.c
new file mode 100644
index 000000000000..b3940b4c6022
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_modes_test.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <drm/drm_drv.h>
+#include <drm/drm_modes.h>
+
+#include <kunit/test.h>
+
+#include <linux/units.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_test_modes_priv {
+	struct drm_device *drm;
+};
+
+static int drm_test_modes_init(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET, "drm-modes-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	test->priv = priv;
+
+	return 0;
+}
+
+static void drm_test_modes_analog_tv_ntsc_480i(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *mode;
+
+	mode = drm_analog_tv_mode(priv->drm,
+				  DRM_MODE_TV_MODE_NTSC,
+				  13500 * HZ_PER_KHZ, 720, 480,
+				  true);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 60);
+	KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+	/* BT.601 defines hsync_start at 736 for 480i */
+	KUNIT_EXPECT_EQ(test, mode->hsync_start, 736);
+
+	/*
+	 * The NTSC standard expects a line to take 63.556us. With a
+	 * pixel clock of 13.5 MHz, a pixel takes around 74ns, so we
+	 * need to have 63556ns / 74ns = 858.
+	 *
+	 * This is also mandated by BT.601.
+	 */
+	KUNIT_EXPECT_EQ(test, mode->htotal, 858);
+
+	KUNIT_EXPECT_EQ(test, mode->vdisplay, 480);
+	KUNIT_EXPECT_EQ(test, mode->vtotal, 525);
+}
+
+static void drm_test_modes_analog_tv_ntsc_480i_inlined(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *expected, *mode;
+
+	expected = drm_analog_tv_mode(priv->drm,
+				      DRM_MODE_TV_MODE_NTSC,
+				      13500 * HZ_PER_KHZ, 720, 480,
+				      true);
+	KUNIT_ASSERT_NOT_NULL(test, expected);
+
+	mode = drm_mode_analog_ntsc_480i(priv->drm);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static void drm_test_modes_analog_tv_pal_576i(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *mode;
+
+	mode = drm_analog_tv_mode(priv->drm,
+				  DRM_MODE_TV_MODE_PAL,
+				  13500 * HZ_PER_KHZ, 720, 576,
+				  true);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 50);
+	KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+	/* BT.601 defines hsync_start at 732 for 576i */
+	KUNIT_EXPECT_EQ(test, mode->hsync_start, 732);
+
+	/*
+	 * The PAL standard expects a line to take 64us. With a pixel
+	 * clock of 13.5 MHz, a pixel takes around 74ns, so we need to
+	 * have 64000ns / 74ns = 864.
+	 *
+	 * This is also mandated by BT.601.
+	 */
+	KUNIT_EXPECT_EQ(test, mode->htotal, 864);
+
+	KUNIT_EXPECT_EQ(test, mode->vdisplay, 576);
+	KUNIT_EXPECT_EQ(test, mode->vtotal, 625);
+}
+
+static void drm_test_modes_analog_tv_pal_576i_inlined(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *expected, *mode;
+
+	expected = drm_analog_tv_mode(priv->drm,
+				      DRM_MODE_TV_MODE_PAL,
+				      13500 * HZ_PER_KHZ, 720, 576,
+				      true);
+	KUNIT_ASSERT_NOT_NULL(test, expected);
+
+	mode = drm_mode_analog_pal_576i(priv->drm);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static struct kunit_case drm_modes_analog_tv_tests[] = {
+	KUNIT_CASE(drm_test_modes_analog_tv_ntsc_480i),
+	KUNIT_CASE(drm_test_modes_analog_tv_ntsc_480i_inlined),
+	KUNIT_CASE(drm_test_modes_analog_tv_pal_576i),
+	KUNIT_CASE(drm_test_modes_analog_tv_pal_576i_inlined),
+	{ }
+};
+
+static struct kunit_suite drm_modes_analog_tv_test_suite = {
+	.name = "drm_modes_analog_tv",
+	.init = drm_test_modes_init,
+	.test_cases = drm_modes_analog_tv_tests,
+};
+
+kunit_test_suite(drm_modes_analog_tv_test_suite);
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index b0c680e6f670..c613f0abe9dc 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -468,6 +468,23 @@ bool drm_mode_is_420_also(const struct drm_display_info *display,
 bool drm_mode_is_420(const struct drm_display_info *display,
 		     const struct drm_display_mode *mode);
 
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+					    enum drm_connector_tv_mode mode,
+					    unsigned long pixel_clock_hz,
+					    unsigned int hdisplay,
+					    unsigned int vdisplay,
+					    bool interlace);
+
+static inline struct drm_display_mode *drm_mode_analog_ntsc_480i(struct drm_device *dev)
+{
+	return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_NTSC, 13500000, 720, 480, true);
+}
+
+static inline struct drm_display_mode *drm_mode_analog_pal_576i(struct drm_device *dev)
+{
+	return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_PAL, 13500000, 720, 576, true);
+}
+
 struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
 				      int hdisplay, int vdisplay, int vrefresh,
 				      bool reduced, bool interlaced,

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 07/25] drm/modes: Add a function to generate analog display modes

[Maxime Ripard]

Multiple drivers (meson, vc4, sun4i) define analog TV 525-lines and
625-lines modes in their drivers.

Since those modes are fairly standard, and that we'll need to use them
in more places in the future, it makes sense to move their definition
into the core framework.

However, analog display usually have fairly loose timings requirements,
the only discrete parameters being the total number of lines and pixel
clock frequency. Thus, we created a function that will create a display
mode from the standard, the pixel frequency and the active area.

Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Rename the tests
- Switch to kunit_test_suite

Changes in v6:
- Fix typo

Changes in v4:
- Reworded the line length check comment
- Switch to HZ_PER_KHZ in tests
- Use previous timing to fill our mode
- Move the number of lines check earlier
---
 drivers/gpu/drm/drm_modes.c            | 474 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/tests/Makefile         |   1 +
 drivers/gpu/drm/tests/drm_modes_test.c | 142 ++++++++++
 include/drm/drm_modes.h                |  17 ++
 4 files changed, 634 insertions(+)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 5d4ac79381c4..71c050c3ee6b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -116,6 +116,480 @@ void drm_mode_probed_add(struct drm_connector *connector,
 }
 EXPORT_SYMBOL(drm_mode_probed_add);
 
+enum drm_mode_analog {
+	DRM_MODE_ANALOG_NTSC, /* 525 lines, 60Hz */
+	DRM_MODE_ANALOG_PAL, /* 625 lines, 50Hz */
+};
+
+/*
+ * The timings come from:
+ * - https://web.archive.org/web/20220406232708/http://www.kolumbus.fi/pami1/video/pal_ntsc.html
+ * - https://web.archive.org/web/20220406124914/http://martin.hinner.info/vga/pal.html
+ * - https://web.archive.org/web/20220609202433/http://www.batsocks.co.uk/readme/video_timing.htm
+ */
+#define NTSC_LINE_DURATION_NS		63556U
+#define NTSC_LINES_NUMBER		525
+
+#define NTSC_HBLK_DURATION_TYP_NS	10900U
+#define NTSC_HBLK_DURATION_MIN_NS	(NTSC_HBLK_DURATION_TYP_NS - 200)
+#define NTSC_HBLK_DURATION_MAX_NS	(NTSC_HBLK_DURATION_TYP_NS + 200)
+
+#define NTSC_HACT_DURATION_TYP_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_TYP_NS)
+#define NTSC_HACT_DURATION_MIN_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_MAX_NS)
+#define NTSC_HACT_DURATION_MAX_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_MIN_NS)
+
+#define NTSC_HFP_DURATION_TYP_NS	1500
+#define NTSC_HFP_DURATION_MIN_NS	1270
+#define NTSC_HFP_DURATION_MAX_NS	2220
+
+#define NTSC_HSLEN_DURATION_TYP_NS	4700
+#define NTSC_HSLEN_DURATION_MIN_NS	(NTSC_HSLEN_DURATION_TYP_NS - 100)
+#define NTSC_HSLEN_DURATION_MAX_NS	(NTSC_HSLEN_DURATION_TYP_NS + 100)
+
+#define NTSC_HBP_DURATION_TYP_NS	4700
+
+/*
+ * I couldn't find the actual tolerance for the back porch, so let's
+ * just reuse the sync length ones.
+ */
+#define NTSC_HBP_DURATION_MIN_NS	(NTSC_HBP_DURATION_TYP_NS - 100)
+#define NTSC_HBP_DURATION_MAX_NS	(NTSC_HBP_DURATION_TYP_NS + 100)
+
+#define PAL_LINE_DURATION_NS		64000U
+#define PAL_LINES_NUMBER		625
+
+#define PAL_HACT_DURATION_TYP_NS	51950U
+#define PAL_HACT_DURATION_MIN_NS	(PAL_HACT_DURATION_TYP_NS - 100)
+#define PAL_HACT_DURATION_MAX_NS	(PAL_HACT_DURATION_TYP_NS + 400)
+
+#define PAL_HBLK_DURATION_TYP_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_TYP_NS)
+#define PAL_HBLK_DURATION_MIN_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_MAX_NS)
+#define PAL_HBLK_DURATION_MAX_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_MIN_NS)
+
+#define PAL_HFP_DURATION_TYP_NS		1650
+#define PAL_HFP_DURATION_MIN_NS		(PAL_HFP_DURATION_TYP_NS - 100)
+#define PAL_HFP_DURATION_MAX_NS		(PAL_HFP_DURATION_TYP_NS + 400)
+
+#define PAL_HSLEN_DURATION_TYP_NS	4700
+#define PAL_HSLEN_DURATION_MIN_NS	(PAL_HSLEN_DURATION_TYP_NS - 200)
+#define PAL_HSLEN_DURATION_MAX_NS	(PAL_HSLEN_DURATION_TYP_NS + 200)
+
+#define PAL_HBP_DURATION_TYP_NS		5700
+#define PAL_HBP_DURATION_MIN_NS		(PAL_HBP_DURATION_TYP_NS - 200)
+#define PAL_HBP_DURATION_MAX_NS		(PAL_HBP_DURATION_TYP_NS + 200)
+
+struct analog_param_field {
+	unsigned int even, odd;
+};
+
+#define PARAM_FIELD(_odd, _even)		\
+	{ .even = _even, .odd = _odd }
+
+struct analog_param_range {
+	unsigned int	min, typ, max;
+};
+
+#define PARAM_RANGE(_min, _typ, _max)		\
+	{ .min = _min, .typ = _typ, .max = _max }
+
+struct analog_parameters {
+	unsigned int			num_lines;
+	unsigned int			line_duration_ns;
+
+	struct analog_param_range	hact_ns;
+	struct analog_param_range	hfp_ns;
+	struct analog_param_range	hslen_ns;
+	struct analog_param_range	hbp_ns;
+	struct analog_param_range	hblk_ns;
+
+	unsigned int			bt601_hfp;
+
+	struct analog_param_field	vfp_lines;
+	struct analog_param_field	vslen_lines;
+	struct analog_param_field	vbp_lines;
+};
+
+#define TV_MODE_PARAMETER(_mode, _lines, _line_dur, _hact, _hfp, _hslen, _hbp, _hblk, _bt601_hfp, _vfp, _vslen, _vbp) \
+	[_mode] = {							\
+		.num_lines = _lines,					\
+		.line_duration_ns = _line_dur,				\
+		.hact_ns = _hact,					\
+		.hfp_ns = _hfp,						\
+		.hslen_ns = _hslen,					\
+		.hbp_ns = _hbp,						\
+		.hblk_ns = _hblk,					\
+		.bt601_hfp = _bt601_hfp,				\
+		.vfp_lines = _vfp,					\
+		.vslen_lines = _vslen,					\
+		.vbp_lines = _vbp,					\
+	}
+
+const static struct analog_parameters tv_modes_parameters[] = {
+	TV_MODE_PARAMETER(DRM_MODE_ANALOG_NTSC,
+			  NTSC_LINES_NUMBER,
+			  NTSC_LINE_DURATION_NS,
+			  PARAM_RANGE(NTSC_HACT_DURATION_MIN_NS,
+				      NTSC_HACT_DURATION_TYP_NS,
+				      NTSC_HACT_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HFP_DURATION_MIN_NS,
+				      NTSC_HFP_DURATION_TYP_NS,
+				      NTSC_HFP_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HSLEN_DURATION_MIN_NS,
+				      NTSC_HSLEN_DURATION_TYP_NS,
+				      NTSC_HSLEN_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HBP_DURATION_MIN_NS,
+				      NTSC_HBP_DURATION_TYP_NS,
+				      NTSC_HBP_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HBLK_DURATION_MIN_NS,
+				      NTSC_HBLK_DURATION_TYP_NS,
+				      NTSC_HBLK_DURATION_MAX_NS),
+			  16,
+			  PARAM_FIELD(3, 3),
+			  PARAM_FIELD(3, 3),
+			  PARAM_FIELD(16, 17)),
+	TV_MODE_PARAMETER(DRM_MODE_ANALOG_PAL,
+			  PAL_LINES_NUMBER,
+			  PAL_LINE_DURATION_NS,
+			  PARAM_RANGE(PAL_HACT_DURATION_MIN_NS,
+				      PAL_HACT_DURATION_TYP_NS,
+				      PAL_HACT_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HFP_DURATION_MIN_NS,
+				      PAL_HFP_DURATION_TYP_NS,
+				      PAL_HFP_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HSLEN_DURATION_MIN_NS,
+				      PAL_HSLEN_DURATION_TYP_NS,
+				      PAL_HSLEN_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HBP_DURATION_MIN_NS,
+				      PAL_HBP_DURATION_TYP_NS,
+				      PAL_HBP_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HBLK_DURATION_MIN_NS,
+				      PAL_HBLK_DURATION_TYP_NS,
+				      PAL_HBLK_DURATION_MAX_NS),
+			  12,
+
+			  /*
+			   * The front porch is actually 6 short sync
+			   * pulses for the even field, and 5 for the
+			   * odd field. Each sync takes half a life so
+			   * the odd field front porch is shorter by
+			   * half a line.
+			   *
+			   * In progressive, we're supposed to use 6
+			   * pulses, so we're fine there
+			   */
+			  PARAM_FIELD(3, 2),
+
+			  /*
+			   * The vsync length is 5 long sync pulses,
+			   * each field taking half a line. We're
+			   * shorter for both fields by half a line.
+			   *
+			   * In progressive, we're supposed to use 5
+			   * pulses, so we're off by half
+			   * a line.
+			   *
+			   * In interlace, we're now off by half a line
+			   * for the even field and one line for the odd
+			   * field.
+			   */
+			  PARAM_FIELD(3, 3),
+
+			  /*
+			   * The back porch starts with post-equalizing
+			   * pulses, consisting in 5 short sync pulses
+			   * for the even field, 4 for the odd field. In
+			   * progressive, it's 5 short syncs.
+			   *
+			   * In progressive, we thus have 2.5 lines,
+			   * plus the 0.5 line we were missing
+			   * previously, so we should use 3 lines.
+			   *
+			   * In interlace, the even field is in the
+			   * exact same case than progressive. For the
+			   * odd field, we should be using 2 lines but
+			   * we're one line short, so we'll make up for
+			   * it here by using 3.
+			   *
+			   * The entire blanking area is supposed to
+			   * take 25 lines, so we also need to account
+			   * for the rest of the blanking area that
+			   * can't be in either the front porch or sync
+			   * period.
+			   */
+			  PARAM_FIELD(19, 20)),
+};
+
+static int fill_analog_mode(struct drm_device *dev,
+			    struct drm_display_mode *mode,
+			    const struct analog_parameters *params,
+			    unsigned long pixel_clock_hz,
+			    unsigned int hactive,
+			    unsigned int vactive,
+			    bool interlace)
+{
+	unsigned long pixel_duration_ns = NSEC_PER_SEC / pixel_clock_hz;
+	unsigned int htotal, vtotal;
+	unsigned int max_hact, hact_duration_ns;
+	unsigned int hblk, hblk_duration_ns;
+	unsigned int hfp, hfp_duration_ns;
+	unsigned int hslen, hslen_duration_ns;
+	unsigned int hbp, hbp_duration_ns;
+	unsigned int porches, porches_duration_ns;
+	unsigned int vfp, vfp_min;
+	unsigned int vbp, vbp_min;
+	unsigned int vslen;
+	bool bt601 = false;
+	int porches_rem;
+	u64 result;
+
+	drm_dbg_kms(dev,
+		    "Generating a %ux%u%c, %u-line mode with a %lu kHz clock\n",
+		    hactive, vactive,
+		    interlace ? 'i' : 'p',
+		    params->num_lines,
+		    pixel_clock_hz / 1000);
+
+	max_hact = params->hact_ns.max / pixel_duration_ns;
+	if (pixel_clock_hz == 13500000 && hactive > max_hact && hactive <= 720) {
+		drm_dbg_kms(dev, "Trying to generate a BT.601 mode. Disabling checks.\n");
+		bt601 = true;
+	}
+
+	/*
+	 * Our pixel duration is going to be round down by the division,
+	 * so rounding up is probably going to introduce even more
+	 * deviation.
+	 */
+	result = (u64)params->line_duration_ns * pixel_clock_hz;
+	do_div(result, NSEC_PER_SEC);
+	htotal = result;
+
+	drm_dbg_kms(dev, "Total Horizontal Number of Pixels: %u\n", htotal);
+
+	hact_duration_ns = hactive * pixel_duration_ns;
+	if (!bt601 &&
+	    (hact_duration_ns < params->hact_ns.min ||
+	     hact_duration_ns > params->hact_ns.max)) {
+		DRM_ERROR("Invalid horizontal active area duration: %uns (min: %u, max %u)\n",
+			  hact_duration_ns, params->hact_ns.min, params->hact_ns.max);
+		return -EINVAL;
+	}
+
+	hblk = htotal - hactive;
+	drm_dbg_kms(dev, "Horizontal Blanking Period: %u\n", hblk);
+
+	hblk_duration_ns = hblk * pixel_duration_ns;
+	if (!bt601 &&
+	    (hblk_duration_ns < params->hblk_ns.min ||
+	     hblk_duration_ns > params->hblk_ns.max)) {
+		DRM_ERROR("Invalid horizontal blanking duration: %uns (min: %u, max %u)\n",
+			  hblk_duration_ns, params->hblk_ns.min, params->hblk_ns.max);
+		return -EINVAL;
+	}
+
+	hslen = DIV_ROUND_UP(params->hslen_ns.typ, pixel_duration_ns);
+	drm_dbg_kms(dev, "Horizontal Sync Period: %u\n", hslen);
+
+	hslen_duration_ns = hslen * pixel_duration_ns;
+	if (!bt601 &&
+	    (hslen_duration_ns < params->hslen_ns.min ||
+	     hslen_duration_ns > params->hslen_ns.max)) {
+		DRM_ERROR("Invalid horizontal sync duration: %uns (min: %u, max %u)\n",
+			  hslen_duration_ns, params->hslen_ns.min, params->hslen_ns.max);
+		return -EINVAL;
+	}
+
+	porches = hblk - hslen;
+	drm_dbg_kms(dev, "Remaining horizontal pixels for both porches: %u\n", porches);
+
+	porches_duration_ns = porches * pixel_duration_ns;
+	if (!bt601 &&
+	    (porches_duration_ns > (params->hfp_ns.max + params->hbp_ns.max) ||
+	     porches_duration_ns < (params->hfp_ns.min + params->hbp_ns.min))) {
+		DRM_ERROR("Invalid horizontal porches duration: %uns\n", porches_duration_ns);
+		return -EINVAL;
+	}
+
+	if (bt601) {
+		hfp = params->bt601_hfp;
+	} else {
+		unsigned int hfp_min = DIV_ROUND_UP(params->hfp_ns.min,
+						    pixel_duration_ns);
+		unsigned int hbp_min = DIV_ROUND_UP(params->hbp_ns.min,
+						    pixel_duration_ns);
+		 int porches_rem = porches - hfp_min - hbp_min;
+
+		hfp = hfp_min + DIV_ROUND_UP(porches_rem, 2);
+	}
+
+	drm_dbg_kms(dev, "Horizontal Front Porch: %u\n", hfp);
+
+	hfp_duration_ns = hfp * pixel_duration_ns;
+	if (!bt601 &&
+	    (hfp_duration_ns < params->hfp_ns.min ||
+	     hfp_duration_ns > params->hfp_ns.max)) {
+		DRM_ERROR("Invalid horizontal front porch duration: %uns (min: %u, max %u)\n",
+			  hfp_duration_ns, params->hfp_ns.min, params->hfp_ns.max);
+		return -EINVAL;
+	}
+
+	hbp = porches - hfp;
+	drm_dbg_kms(dev, "Horizontal Back Porch: %u\n", hbp);
+
+	hbp_duration_ns = hbp * pixel_duration_ns;
+	if (!bt601 &&
+	    (hbp_duration_ns < params->hbp_ns.min ||
+	     hbp_duration_ns > params->hbp_ns.max)) {
+		DRM_ERROR("Invalid horizontal back porch duration: %uns (min: %u, max %u)\n",
+			  hbp_duration_ns, params->hbp_ns.min, params->hbp_ns.max);
+		return -EINVAL;
+	}
+
+	if (htotal != (hactive + hfp + hslen + hbp))
+		return -EINVAL;
+
+	mode->clock = pixel_clock_hz / 1000;
+	mode->hdisplay = hactive;
+	mode->hsync_start = mode->hdisplay + hfp;
+	mode->hsync_end = mode->hsync_start + hslen;
+	mode->htotal = mode->hsync_end + hbp;
+
+	if (interlace) {
+		vfp_min = params->vfp_lines.even + params->vfp_lines.odd;
+		vbp_min = params->vbp_lines.even + params->vbp_lines.odd;
+		vslen = params->vslen_lines.even + params->vslen_lines.odd;
+	} else {
+		/*
+		 * By convention, NTSC (aka 525/60) systems start with
+		 * the even field, but PAL (aka 625/50) systems start
+		 * with the odd one.
+		 *
+		 * PAL systems also have asymetric timings between the
+		 * even and odd field, while NTSC is symetric.
+		 *
+		 * Moreover, if we want to create a progressive mode for
+		 * PAL, we need to use the odd field timings.
+		 *
+		 * Since odd == even for NTSC, we can just use the odd
+		 * one all the time to simplify the code a bit.
+		 */
+		vfp_min = params->vfp_lines.odd;
+		vbp_min = params->vbp_lines.odd;
+		vslen = params->vslen_lines.odd;
+	}
+
+	drm_dbg_kms(dev, "Vertical Sync Period: %u\n", vslen);
+
+	porches = params->num_lines - vactive - vslen;
+	drm_dbg_kms(dev, "Remaining vertical pixels for both porches: %u\n", porches);
+
+	porches_rem = porches - vfp_min - vbp_min;
+	vfp = vfp_min + (porches_rem / 2);
+	drm_dbg_kms(dev, "Vertical Front Porch: %u\n", vfp);
+
+	vbp = porches - vfp;
+	drm_dbg_kms(dev, "Vertical Back Porch: %u\n", vbp);
+
+	vtotal = vactive + vfp + vslen + vbp;
+	if (params->num_lines != vtotal) {
+		DRM_ERROR("Invalid vertical total: %upx (expected %upx)\n",
+			  vtotal, params->num_lines);
+		return -EINVAL;
+	}
+
+	mode->vdisplay = vactive;
+	mode->vsync_start = mode->vdisplay + vfp;
+	mode->vsync_end = mode->vsync_start + vslen;
+	mode->vtotal = mode->vsync_end + vbp;
+
+	if (mode->vtotal != params->num_lines)
+		return -EINVAL;
+
+	mode->type = DRM_MODE_TYPE_DRIVER;
+	mode->flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC;
+	if (interlace)
+		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+	drm_mode_set_name(mode);
+
+	drm_dbg_kms(dev, "Generated mode " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
+
+	return 0;
+}
+
+/**
+ * drm_analog_tv_mode - create a display mode for an analog TV
+ * @dev: drm device
+ * @tv_mode: TV Mode standard to create a mode for. See DRM_MODE_TV_MODE_*.
+ * @pixel_clock_hz: Pixel Clock Frequency, in Hertz
+ * @hdisplay: hdisplay size
+ * @vdisplay: vdisplay size
+ * @interlace: whether to compute an interlaced mode
+ *
+ * This function creates a struct drm_display_mode instance suited for
+ * an analog TV output, for one of the usual analog TV mode.
+ *
+ * Note that @hdisplay is larger than the usual constraints for the PAL
+ * and NTSC timings, and we'll choose to ignore most timings constraints
+ * to reach those resolutions.
+ *
+ * Returns:
+ *
+ * A pointer to the mode, allocated with drm_mode_create(). Returns NULL
+ * on error.
+ */
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+					    enum drm_connector_tv_mode tv_mode,
+					    unsigned long pixel_clock_hz,
+					    unsigned int hdisplay,
+					    unsigned int vdisplay,
+					    bool interlace)
+{
+	struct drm_display_mode *mode;
+	enum drm_mode_analog analog;
+	int ret;
+
+	switch (tv_mode) {
+	case DRM_MODE_TV_MODE_NTSC:
+		fallthrough;
+	case DRM_MODE_TV_MODE_NTSC_443:
+		fallthrough;
+	case DRM_MODE_TV_MODE_NTSC_J:
+		fallthrough;
+	case DRM_MODE_TV_MODE_PAL_M:
+		analog = DRM_MODE_ANALOG_NTSC;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL:
+		fallthrough;
+	case DRM_MODE_TV_MODE_PAL_N:
+		fallthrough;
+	case DRM_MODE_TV_MODE_SECAM:
+		analog = DRM_MODE_ANALOG_PAL;
+		break;
+
+	default:
+		return NULL;
+	}
+
+	mode = drm_mode_create(dev);
+	if (!mode)
+		return NULL;
+
+	ret = fill_analog_mode(dev, mode,
+			       &tv_modes_parameters[analog],
+			       pixel_clock_hz, hdisplay, vdisplay, interlace);
+	if (ret)
+		goto err_free_mode;
+
+	return mode;
+
+err_free_mode:
+	drm_mode_destroy(dev, mode);
+	return NULL;
+}
+EXPORT_SYMBOL(drm_analog_tv_mode);
+
 /**
  * drm_cvt_mode -create a modeline based on the CVT algorithm
  * @dev: drm device
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b29ef1085cad..b22ac96fdd65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -10,5 +10,6 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_framebuffer_test.o \
 	drm_kunit_helpers.o \
 	drm_mm_test.o \
+	drm_modes_test.o \
 	drm_plane_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_modes_test.c b/drivers/gpu/drm/tests/drm_modes_test.c
new file mode 100644
index 000000000000..b3940b4c6022
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_modes_test.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <drm/drm_drv.h>
+#include <drm/drm_modes.h>
+
+#include <kunit/test.h>
+
+#include <linux/units.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_test_modes_priv {
+	struct drm_device *drm;
+};
+
+static int drm_test_modes_init(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET, "drm-modes-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	test->priv = priv;
+
+	return 0;
+}
+
+static void drm_test_modes_analog_tv_ntsc_480i(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *mode;
+
+	mode = drm_analog_tv_mode(priv->drm,
+				  DRM_MODE_TV_MODE_NTSC,
+				  13500 * HZ_PER_KHZ, 720, 480,
+				  true);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 60);
+	KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+	/* BT.601 defines hsync_start at 736 for 480i */
+	KUNIT_EXPECT_EQ(test, mode->hsync_start, 736);
+
+	/*
+	 * The NTSC standard expects a line to take 63.556us. With a
+	 * pixel clock of 13.5 MHz, a pixel takes around 74ns, so we
+	 * need to have 63556ns / 74ns = 858.
+	 *
+	 * This is also mandated by BT.601.
+	 */
+	KUNIT_EXPECT_EQ(test, mode->htotal, 858);
+
+	KUNIT_EXPECT_EQ(test, mode->vdisplay, 480);
+	KUNIT_EXPECT_EQ(test, mode->vtotal, 525);
+}
+
+static void drm_test_modes_analog_tv_ntsc_480i_inlined(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *expected, *mode;
+
+	expected = drm_analog_tv_mode(priv->drm,
+				      DRM_MODE_TV_MODE_NTSC,
+				      13500 * HZ_PER_KHZ, 720, 480,
+				      true);
+	KUNIT_ASSERT_NOT_NULL(test, expected);
+
+	mode = drm_mode_analog_ntsc_480i(priv->drm);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static void drm_test_modes_analog_tv_pal_576i(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *mode;
+
+	mode = drm_analog_tv_mode(priv->drm,
+				  DRM_MODE_TV_MODE_PAL,
+				  13500 * HZ_PER_KHZ, 720, 576,
+				  true);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 50);
+	KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+	/* BT.601 defines hsync_start at 732 for 576i */
+	KUNIT_EXPECT_EQ(test, mode->hsync_start, 732);
+
+	/*
+	 * The PAL standard expects a line to take 64us. With a pixel
+	 * clock of 13.5 MHz, a pixel takes around 74ns, so we need to
+	 * have 64000ns / 74ns = 864.
+	 *
+	 * This is also mandated by BT.601.
+	 */
+	KUNIT_EXPECT_EQ(test, mode->htotal, 864);
+
+	KUNIT_EXPECT_EQ(test, mode->vdisplay, 576);
+	KUNIT_EXPECT_EQ(test, mode->vtotal, 625);
+}
+
+static void drm_test_modes_analog_tv_pal_576i_inlined(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *expected, *mode;
+
+	expected = drm_analog_tv_mode(priv->drm,
+				      DRM_MODE_TV_MODE_PAL,
+				      13500 * HZ_PER_KHZ, 720, 576,
+				      true);
+	KUNIT_ASSERT_NOT_NULL(test, expected);
+
+	mode = drm_mode_analog_pal_576i(priv->drm);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static struct kunit_case drm_modes_analog_tv_tests[] = {
+	KUNIT_CASE(drm_test_modes_analog_tv_ntsc_480i),
+	KUNIT_CASE(drm_test_modes_analog_tv_ntsc_480i_inlined),
+	KUNIT_CASE(drm_test_modes_analog_tv_pal_576i),
+	KUNIT_CASE(drm_test_modes_analog_tv_pal_576i_inlined),
+	{ }
+};
+
+static struct kunit_suite drm_modes_analog_tv_test_suite = {
+	.name = "drm_modes_analog_tv",
+	.init = drm_test_modes_init,
+	.test_cases = drm_modes_analog_tv_tests,
+};
+
+kunit_test_suite(drm_modes_analog_tv_test_suite);
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index b0c680e6f670..c613f0abe9dc 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -468,6 +468,23 @@ bool drm_mode_is_420_also(const struct drm_display_info *display,
 bool drm_mode_is_420(const struct drm_display_info *display,
 		     const struct drm_display_mode *mode);
 
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+					    enum drm_connector_tv_mode mode,
+					    unsigned long pixel_clock_hz,
+					    unsigned int hdisplay,
+					    unsigned int vdisplay,
+					    bool interlace);
+
+static inline struct drm_display_mode *drm_mode_analog_ntsc_480i(struct drm_device *dev)
+{
+	return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_NTSC, 13500000, 720, 480, true);
+}
+
+static inline struct drm_display_mode *drm_mode_analog_pal_576i(struct drm_device *dev)
+{
+	return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_PAL, 13500000, 720, 576, true);
+}
+
 struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
 				      int hdisplay, int vdisplay, int vrefresh,
 				      bool reduced, bool interlaced,

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 07/25] drm/modes: Add a function to generate analog display modes

[Maxime Ripard]

Multiple drivers (meson, vc4, sun4i) define analog TV 525-lines and
625-lines modes in their drivers.

Since those modes are fairly standard, and that we'll need to use them
in more places in the future, it makes sense to move their definition
into the core framework.

However, analog display usually have fairly loose timings requirements,
the only discrete parameters being the total number of lines and pixel
clock frequency. Thus, we created a function that will create a display
mode from the standard, the pixel frequency and the active area.

Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Rename the tests
- Switch to kunit_test_suite

Changes in v6:
- Fix typo

Changes in v4:
- Reworded the line length check comment
- Switch to HZ_PER_KHZ in tests
- Use previous timing to fill our mode
- Move the number of lines check earlier
---
 drivers/gpu/drm/drm_modes.c            | 474 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/tests/Makefile         |   1 +
 drivers/gpu/drm/tests/drm_modes_test.c | 142 ++++++++++
 include/drm/drm_modes.h                |  17 ++
 4 files changed, 634 insertions(+)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 5d4ac79381c4..71c050c3ee6b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -116,6 +116,480 @@ void drm_mode_probed_add(struct drm_connector *connector,
 }
 EXPORT_SYMBOL(drm_mode_probed_add);
 
+enum drm_mode_analog {
+	DRM_MODE_ANALOG_NTSC, /* 525 lines, 60Hz */
+	DRM_MODE_ANALOG_PAL, /* 625 lines, 50Hz */
+};
+
+/*
+ * The timings come from:
+ * - https://web.archive.org/web/20220406232708/http://www.kolumbus.fi/pami1/video/pal_ntsc.html
+ * - https://web.archive.org/web/20220406124914/http://martin.hinner.info/vga/pal.html
+ * - https://web.archive.org/web/20220609202433/http://www.batsocks.co.uk/readme/video_timing.htm
+ */
+#define NTSC_LINE_DURATION_NS		63556U
+#define NTSC_LINES_NUMBER		525
+
+#define NTSC_HBLK_DURATION_TYP_NS	10900U
+#define NTSC_HBLK_DURATION_MIN_NS	(NTSC_HBLK_DURATION_TYP_NS - 200)
+#define NTSC_HBLK_DURATION_MAX_NS	(NTSC_HBLK_DURATION_TYP_NS + 200)
+
+#define NTSC_HACT_DURATION_TYP_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_TYP_NS)
+#define NTSC_HACT_DURATION_MIN_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_MAX_NS)
+#define NTSC_HACT_DURATION_MAX_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_MIN_NS)
+
+#define NTSC_HFP_DURATION_TYP_NS	1500
+#define NTSC_HFP_DURATION_MIN_NS	1270
+#define NTSC_HFP_DURATION_MAX_NS	2220
+
+#define NTSC_HSLEN_DURATION_TYP_NS	4700
+#define NTSC_HSLEN_DURATION_MIN_NS	(NTSC_HSLEN_DURATION_TYP_NS - 100)
+#define NTSC_HSLEN_DURATION_MAX_NS	(NTSC_HSLEN_DURATION_TYP_NS + 100)
+
+#define NTSC_HBP_DURATION_TYP_NS	4700
+
+/*
+ * I couldn't find the actual tolerance for the back porch, so let's
+ * just reuse the sync length ones.
+ */
+#define NTSC_HBP_DURATION_MIN_NS	(NTSC_HBP_DURATION_TYP_NS - 100)
+#define NTSC_HBP_DURATION_MAX_NS	(NTSC_HBP_DURATION_TYP_NS + 100)
+
+#define PAL_LINE_DURATION_NS		64000U
+#define PAL_LINES_NUMBER		625
+
+#define PAL_HACT_DURATION_TYP_NS	51950U
+#define PAL_HACT_DURATION_MIN_NS	(PAL_HACT_DURATION_TYP_NS - 100)
+#define PAL_HACT_DURATION_MAX_NS	(PAL_HACT_DURATION_TYP_NS + 400)
+
+#define PAL_HBLK_DURATION_TYP_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_TYP_NS)
+#define PAL_HBLK_DURATION_MIN_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_MAX_NS)
+#define PAL_HBLK_DURATION_MAX_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_MIN_NS)
+
+#define PAL_HFP_DURATION_TYP_NS		1650
+#define PAL_HFP_DURATION_MIN_NS		(PAL_HFP_DURATION_TYP_NS - 100)
+#define PAL_HFP_DURATION_MAX_NS		(PAL_HFP_DURATION_TYP_NS + 400)
+
+#define PAL_HSLEN_DURATION_TYP_NS	4700
+#define PAL_HSLEN_DURATION_MIN_NS	(PAL_HSLEN_DURATION_TYP_NS - 200)
+#define PAL_HSLEN_DURATION_MAX_NS	(PAL_HSLEN_DURATION_TYP_NS + 200)
+
+#define PAL_HBP_DURATION_TYP_NS		5700
+#define PAL_HBP_DURATION_MIN_NS		(PAL_HBP_DURATION_TYP_NS - 200)
+#define PAL_HBP_DURATION_MAX_NS		(PAL_HBP_DURATION_TYP_NS + 200)
+
+struct analog_param_field {
+	unsigned int even, odd;
+};
+
+#define PARAM_FIELD(_odd, _even)		\
+	{ .even = _even, .odd = _odd }
+
+struct analog_param_range {
+	unsigned int	min, typ, max;
+};
+
+#define PARAM_RANGE(_min, _typ, _max)		\
+	{ .min = _min, .typ = _typ, .max = _max }
+
+struct analog_parameters {
+	unsigned int			num_lines;
+	unsigned int			line_duration_ns;
+
+	struct analog_param_range	hact_ns;
+	struct analog_param_range	hfp_ns;
+	struct analog_param_range	hslen_ns;
+	struct analog_param_range	hbp_ns;
+	struct analog_param_range	hblk_ns;
+
+	unsigned int			bt601_hfp;
+
+	struct analog_param_field	vfp_lines;
+	struct analog_param_field	vslen_lines;
+	struct analog_param_field	vbp_lines;
+};
+
+#define TV_MODE_PARAMETER(_mode, _lines, _line_dur, _hact, _hfp, _hslen, _hbp, _hblk, _bt601_hfp, _vfp, _vslen, _vbp) \
+	[_mode] = {							\
+		.num_lines = _lines,					\
+		.line_duration_ns = _line_dur,				\
+		.hact_ns = _hact,					\
+		.hfp_ns = _hfp,						\
+		.hslen_ns = _hslen,					\
+		.hbp_ns = _hbp,						\
+		.hblk_ns = _hblk,					\
+		.bt601_hfp = _bt601_hfp,				\
+		.vfp_lines = _vfp,					\
+		.vslen_lines = _vslen,					\
+		.vbp_lines = _vbp,					\
+	}
+
+const static struct analog_parameters tv_modes_parameters[] = {
+	TV_MODE_PARAMETER(DRM_MODE_ANALOG_NTSC,
+			  NTSC_LINES_NUMBER,
+			  NTSC_LINE_DURATION_NS,
+			  PARAM_RANGE(NTSC_HACT_DURATION_MIN_NS,
+				      NTSC_HACT_DURATION_TYP_NS,
+				      NTSC_HACT_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HFP_DURATION_MIN_NS,
+				      NTSC_HFP_DURATION_TYP_NS,
+				      NTSC_HFP_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HSLEN_DURATION_MIN_NS,
+				      NTSC_HSLEN_DURATION_TYP_NS,
+				      NTSC_HSLEN_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HBP_DURATION_MIN_NS,
+				      NTSC_HBP_DURATION_TYP_NS,
+				      NTSC_HBP_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HBLK_DURATION_MIN_NS,
+				      NTSC_HBLK_DURATION_TYP_NS,
+				      NTSC_HBLK_DURATION_MAX_NS),
+			  16,
+			  PARAM_FIELD(3, 3),
+			  PARAM_FIELD(3, 3),
+			  PARAM_FIELD(16, 17)),
+	TV_MODE_PARAMETER(DRM_MODE_ANALOG_PAL,
+			  PAL_LINES_NUMBER,
+			  PAL_LINE_DURATION_NS,
+			  PARAM_RANGE(PAL_HACT_DURATION_MIN_NS,
+				      PAL_HACT_DURATION_TYP_NS,
+				      PAL_HACT_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HFP_DURATION_MIN_NS,
+				      PAL_HFP_DURATION_TYP_NS,
+				      PAL_HFP_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HSLEN_DURATION_MIN_NS,
+				      PAL_HSLEN_DURATION_TYP_NS,
+				      PAL_HSLEN_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HBP_DURATION_MIN_NS,
+				      PAL_HBP_DURATION_TYP_NS,
+				      PAL_HBP_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HBLK_DURATION_MIN_NS,
+				      PAL_HBLK_DURATION_TYP_NS,
+				      PAL_HBLK_DURATION_MAX_NS),
+			  12,
+
+			  /*
+			   * The front porch is actually 6 short sync
+			   * pulses for the even field, and 5 for the
+			   * odd field. Each sync takes half a life so
+			   * the odd field front porch is shorter by
+			   * half a line.
+			   *
+			   * In progressive, we're supposed to use 6
+			   * pulses, so we're fine there
+			   */
+			  PARAM_FIELD(3, 2),
+
+			  /*
+			   * The vsync length is 5 long sync pulses,
+			   * each field taking half a line. We're
+			   * shorter for both fields by half a line.
+			   *
+			   * In progressive, we're supposed to use 5
+			   * pulses, so we're off by half
+			   * a line.
+			   *
+			   * In interlace, we're now off by half a line
+			   * for the even field and one line for the odd
+			   * field.
+			   */
+			  PARAM_FIELD(3, 3),
+
+			  /*
+			   * The back porch starts with post-equalizing
+			   * pulses, consisting in 5 short sync pulses
+			   * for the even field, 4 for the odd field. In
+			   * progressive, it's 5 short syncs.
+			   *
+			   * In progressive, we thus have 2.5 lines,
+			   * plus the 0.5 line we were missing
+			   * previously, so we should use 3 lines.
+			   *
+			   * In interlace, the even field is in the
+			   * exact same case than progressive. For the
+			   * odd field, we should be using 2 lines but
+			   * we're one line short, so we'll make up for
+			   * it here by using 3.
+			   *
+			   * The entire blanking area is supposed to
+			   * take 25 lines, so we also need to account
+			   * for the rest of the blanking area that
+			   * can't be in either the front porch or sync
+			   * period.
+			   */
+			  PARAM_FIELD(19, 20)),
+};
+
+static int fill_analog_mode(struct drm_device *dev,
+			    struct drm_display_mode *mode,
+			    const struct analog_parameters *params,
+			    unsigned long pixel_clock_hz,
+			    unsigned int hactive,
+			    unsigned int vactive,
+			    bool interlace)
+{
+	unsigned long pixel_duration_ns = NSEC_PER_SEC / pixel_clock_hz;
+	unsigned int htotal, vtotal;
+	unsigned int max_hact, hact_duration_ns;
+	unsigned int hblk, hblk_duration_ns;
+	unsigned int hfp, hfp_duration_ns;
+	unsigned int hslen, hslen_duration_ns;
+	unsigned int hbp, hbp_duration_ns;
+	unsigned int porches, porches_duration_ns;
+	unsigned int vfp, vfp_min;
+	unsigned int vbp, vbp_min;
+	unsigned int vslen;
+	bool bt601 = false;
+	int porches_rem;
+	u64 result;
+
+	drm_dbg_kms(dev,
+		    "Generating a %ux%u%c, %u-line mode with a %lu kHz clock\n",
+		    hactive, vactive,
+		    interlace ? 'i' : 'p',
+		    params->num_lines,
+		    pixel_clock_hz / 1000);
+
+	max_hact = params->hact_ns.max / pixel_duration_ns;
+	if (pixel_clock_hz == 13500000 && hactive > max_hact && hactive <= 720) {
+		drm_dbg_kms(dev, "Trying to generate a BT.601 mode. Disabling checks.\n");
+		bt601 = true;
+	}
+
+	/*
+	 * Our pixel duration is going to be round down by the division,
+	 * so rounding up is probably going to introduce even more
+	 * deviation.
+	 */
+	result = (u64)params->line_duration_ns * pixel_clock_hz;
+	do_div(result, NSEC_PER_SEC);
+	htotal = result;
+
+	drm_dbg_kms(dev, "Total Horizontal Number of Pixels: %u\n", htotal);
+
+	hact_duration_ns = hactive * pixel_duration_ns;
+	if (!bt601 &&
+	    (hact_duration_ns < params->hact_ns.min ||
+	     hact_duration_ns > params->hact_ns.max)) {
+		DRM_ERROR("Invalid horizontal active area duration: %uns (min: %u, max %u)\n",
+			  hact_duration_ns, params->hact_ns.min, params->hact_ns.max);
+		return -EINVAL;
+	}
+
+	hblk = htotal - hactive;
+	drm_dbg_kms(dev, "Horizontal Blanking Period: %u\n", hblk);
+
+	hblk_duration_ns = hblk * pixel_duration_ns;
+	if (!bt601 &&
+	    (hblk_duration_ns < params->hblk_ns.min ||
+	     hblk_duration_ns > params->hblk_ns.max)) {
+		DRM_ERROR("Invalid horizontal blanking duration: %uns (min: %u, max %u)\n",
+			  hblk_duration_ns, params->hblk_ns.min, params->hblk_ns.max);
+		return -EINVAL;
+	}
+
+	hslen = DIV_ROUND_UP(params->hslen_ns.typ, pixel_duration_ns);
+	drm_dbg_kms(dev, "Horizontal Sync Period: %u\n", hslen);
+
+	hslen_duration_ns = hslen * pixel_duration_ns;
+	if (!bt601 &&
+	    (hslen_duration_ns < params->hslen_ns.min ||
+	     hslen_duration_ns > params->hslen_ns.max)) {
+		DRM_ERROR("Invalid horizontal sync duration: %uns (min: %u, max %u)\n",
+			  hslen_duration_ns, params->hslen_ns.min, params->hslen_ns.max);
+		return -EINVAL;
+	}
+
+	porches = hblk - hslen;
+	drm_dbg_kms(dev, "Remaining horizontal pixels for both porches: %u\n", porches);
+
+	porches_duration_ns = porches * pixel_duration_ns;
+	if (!bt601 &&
+	    (porches_duration_ns > (params->hfp_ns.max + params->hbp_ns.max) ||
+	     porches_duration_ns < (params->hfp_ns.min + params->hbp_ns.min))) {
+		DRM_ERROR("Invalid horizontal porches duration: %uns\n", porches_duration_ns);
+		return -EINVAL;
+	}
+
+	if (bt601) {
+		hfp = params->bt601_hfp;
+	} else {
+		unsigned int hfp_min = DIV_ROUND_UP(params->hfp_ns.min,
+						    pixel_duration_ns);
+		unsigned int hbp_min = DIV_ROUND_UP(params->hbp_ns.min,
+						    pixel_duration_ns);
+		 int porches_rem = porches - hfp_min - hbp_min;
+
+		hfp = hfp_min + DIV_ROUND_UP(porches_rem, 2);
+	}
+
+	drm_dbg_kms(dev, "Horizontal Front Porch: %u\n", hfp);
+
+	hfp_duration_ns = hfp * pixel_duration_ns;
+	if (!bt601 &&
+	    (hfp_duration_ns < params->hfp_ns.min ||
+	     hfp_duration_ns > params->hfp_ns.max)) {
+		DRM_ERROR("Invalid horizontal front porch duration: %uns (min: %u, max %u)\n",
+			  hfp_duration_ns, params->hfp_ns.min, params->hfp_ns.max);
+		return -EINVAL;
+	}
+
+	hbp = porches - hfp;
+	drm_dbg_kms(dev, "Horizontal Back Porch: %u\n", hbp);
+
+	hbp_duration_ns = hbp * pixel_duration_ns;
+	if (!bt601 &&
+	    (hbp_duration_ns < params->hbp_ns.min ||
+	     hbp_duration_ns > params->hbp_ns.max)) {
+		DRM_ERROR("Invalid horizontal back porch duration: %uns (min: %u, max %u)\n",
+			  hbp_duration_ns, params->hbp_ns.min, params->hbp_ns.max);
+		return -EINVAL;
+	}
+
+	if (htotal != (hactive + hfp + hslen + hbp))
+		return -EINVAL;
+
+	mode->clock = pixel_clock_hz / 1000;
+	mode->hdisplay = hactive;
+	mode->hsync_start = mode->hdisplay + hfp;
+	mode->hsync_end = mode->hsync_start + hslen;
+	mode->htotal = mode->hsync_end + hbp;
+
+	if (interlace) {
+		vfp_min = params->vfp_lines.even + params->vfp_lines.odd;
+		vbp_min = params->vbp_lines.even + params->vbp_lines.odd;
+		vslen = params->vslen_lines.even + params->vslen_lines.odd;
+	} else {
+		/*
+		 * By convention, NTSC (aka 525/60) systems start with
+		 * the even field, but PAL (aka 625/50) systems start
+		 * with the odd one.
+		 *
+		 * PAL systems also have asymetric timings between the
+		 * even and odd field, while NTSC is symetric.
+		 *
+		 * Moreover, if we want to create a progressive mode for
+		 * PAL, we need to use the odd field timings.
+		 *
+		 * Since odd == even for NTSC, we can just use the odd
+		 * one all the time to simplify the code a bit.
+		 */
+		vfp_min = params->vfp_lines.odd;
+		vbp_min = params->vbp_lines.odd;
+		vslen = params->vslen_lines.odd;
+	}
+
+	drm_dbg_kms(dev, "Vertical Sync Period: %u\n", vslen);
+
+	porches = params->num_lines - vactive - vslen;
+	drm_dbg_kms(dev, "Remaining vertical pixels for both porches: %u\n", porches);
+
+	porches_rem = porches - vfp_min - vbp_min;
+	vfp = vfp_min + (porches_rem / 2);
+	drm_dbg_kms(dev, "Vertical Front Porch: %u\n", vfp);
+
+	vbp = porches - vfp;
+	drm_dbg_kms(dev, "Vertical Back Porch: %u\n", vbp);
+
+	vtotal = vactive + vfp + vslen + vbp;
+	if (params->num_lines != vtotal) {
+		DRM_ERROR("Invalid vertical total: %upx (expected %upx)\n",
+			  vtotal, params->num_lines);
+		return -EINVAL;
+	}
+
+	mode->vdisplay = vactive;
+	mode->vsync_start = mode->vdisplay + vfp;
+	mode->vsync_end = mode->vsync_start + vslen;
+	mode->vtotal = mode->vsync_end + vbp;
+
+	if (mode->vtotal != params->num_lines)
+		return -EINVAL;
+
+	mode->type = DRM_MODE_TYPE_DRIVER;
+	mode->flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC;
+	if (interlace)
+		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+	drm_mode_set_name(mode);
+
+	drm_dbg_kms(dev, "Generated mode " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
+
+	return 0;
+}
+
+/**
+ * drm_analog_tv_mode - create a display mode for an analog TV
+ * @dev: drm device
+ * @tv_mode: TV Mode standard to create a mode for. See DRM_MODE_TV_MODE_*.
+ * @pixel_clock_hz: Pixel Clock Frequency, in Hertz
+ * @hdisplay: hdisplay size
+ * @vdisplay: vdisplay size
+ * @interlace: whether to compute an interlaced mode
+ *
+ * This function creates a struct drm_display_mode instance suited for
+ * an analog TV output, for one of the usual analog TV mode.
+ *
+ * Note that @hdisplay is larger than the usual constraints for the PAL
+ * and NTSC timings, and we'll choose to ignore most timings constraints
+ * to reach those resolutions.
+ *
+ * Returns:
+ *
+ * A pointer to the mode, allocated with drm_mode_create(). Returns NULL
+ * on error.
+ */
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+					    enum drm_connector_tv_mode tv_mode,
+					    unsigned long pixel_clock_hz,
+					    unsigned int hdisplay,
+					    unsigned int vdisplay,
+					    bool interlace)
+{
+	struct drm_display_mode *mode;
+	enum drm_mode_analog analog;
+	int ret;
+
+	switch (tv_mode) {
+	case DRM_MODE_TV_MODE_NTSC:
+		fallthrough;
+	case DRM_MODE_TV_MODE_NTSC_443:
+		fallthrough;
+	case DRM_MODE_TV_MODE_NTSC_J:
+		fallthrough;
+	case DRM_MODE_TV_MODE_PAL_M:
+		analog = DRM_MODE_ANALOG_NTSC;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL:
+		fallthrough;
+	case DRM_MODE_TV_MODE_PAL_N:
+		fallthrough;
+	case DRM_MODE_TV_MODE_SECAM:
+		analog = DRM_MODE_ANALOG_PAL;
+		break;
+
+	default:
+		return NULL;
+	}
+
+	mode = drm_mode_create(dev);
+	if (!mode)
+		return NULL;
+
+	ret = fill_analog_mode(dev, mode,
+			       &tv_modes_parameters[analog],
+			       pixel_clock_hz, hdisplay, vdisplay, interlace);
+	if (ret)
+		goto err_free_mode;
+
+	return mode;
+
+err_free_mode:
+	drm_mode_destroy(dev, mode);
+	return NULL;
+}
+EXPORT_SYMBOL(drm_analog_tv_mode);
+
 /**
  * drm_cvt_mode -create a modeline based on the CVT algorithm
  * @dev: drm device
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b29ef1085cad..b22ac96fdd65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -10,5 +10,6 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_framebuffer_test.o \
 	drm_kunit_helpers.o \
 	drm_mm_test.o \
+	drm_modes_test.o \
 	drm_plane_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_modes_test.c b/drivers/gpu/drm/tests/drm_modes_test.c
new file mode 100644
index 000000000000..b3940b4c6022
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_modes_test.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <drm/drm_drv.h>
+#include <drm/drm_modes.h>
+
+#include <kunit/test.h>
+
+#include <linux/units.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_test_modes_priv {
+	struct drm_device *drm;
+};
+
+static int drm_test_modes_init(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET, "drm-modes-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	test->priv = priv;
+
+	return 0;
+}
+
+static void drm_test_modes_analog_tv_ntsc_480i(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *mode;
+
+	mode = drm_analog_tv_mode(priv->drm,
+				  DRM_MODE_TV_MODE_NTSC,
+				  13500 * HZ_PER_KHZ, 720, 480,
+				  true);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 60);
+	KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+	/* BT.601 defines hsync_start at 736 for 480i */
+	KUNIT_EXPECT_EQ(test, mode->hsync_start, 736);
+
+	/*
+	 * The NTSC standard expects a line to take 63.556us. With a
+	 * pixel clock of 13.5 MHz, a pixel takes around 74ns, so we
+	 * need to have 63556ns / 74ns = 858.
+	 *
+	 * This is also mandated by BT.601.
+	 */
+	KUNIT_EXPECT_EQ(test, mode->htotal, 858);
+
+	KUNIT_EXPECT_EQ(test, mode->vdisplay, 480);
+	KUNIT_EXPECT_EQ(test, mode->vtotal, 525);
+}
+
+static void drm_test_modes_analog_tv_ntsc_480i_inlined(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *expected, *mode;
+
+	expected = drm_analog_tv_mode(priv->drm,
+				      DRM_MODE_TV_MODE_NTSC,
+				      13500 * HZ_PER_KHZ, 720, 480,
+				      true);
+	KUNIT_ASSERT_NOT_NULL(test, expected);
+
+	mode = drm_mode_analog_ntsc_480i(priv->drm);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static void drm_test_modes_analog_tv_pal_576i(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *mode;
+
+	mode = drm_analog_tv_mode(priv->drm,
+				  DRM_MODE_TV_MODE_PAL,
+				  13500 * HZ_PER_KHZ, 720, 576,
+				  true);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 50);
+	KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+	/* BT.601 defines hsync_start at 732 for 576i */
+	KUNIT_EXPECT_EQ(test, mode->hsync_start, 732);
+
+	/*
+	 * The PAL standard expects a line to take 64us. With a pixel
+	 * clock of 13.5 MHz, a pixel takes around 74ns, so we need to
+	 * have 64000ns / 74ns = 864.
+	 *
+	 * This is also mandated by BT.601.
+	 */
+	KUNIT_EXPECT_EQ(test, mode->htotal, 864);
+
+	KUNIT_EXPECT_EQ(test, mode->vdisplay, 576);
+	KUNIT_EXPECT_EQ(test, mode->vtotal, 625);
+}
+
+static void drm_test_modes_analog_tv_pal_576i_inlined(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *expected, *mode;
+
+	expected = drm_analog_tv_mode(priv->drm,
+				      DRM_MODE_TV_MODE_PAL,
+				      13500 * HZ_PER_KHZ, 720, 576,
+				      true);
+	KUNIT_ASSERT_NOT_NULL(test, expected);
+
+	mode = drm_mode_analog_pal_576i(priv->drm);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static struct kunit_case drm_modes_analog_tv_tests[] = {
+	KUNIT_CASE(drm_test_modes_analog_tv_ntsc_480i),
+	KUNIT_CASE(drm_test_modes_analog_tv_ntsc_480i_inlined),
+	KUNIT_CASE(drm_test_modes_analog_tv_pal_576i),
+	KUNIT_CASE(drm_test_modes_analog_tv_pal_576i_inlined),
+	{ }
+};
+
+static struct kunit_suite drm_modes_analog_tv_test_suite = {
+	.name = "drm_modes_analog_tv",
+	.init = drm_test_modes_init,
+	.test_cases = drm_modes_analog_tv_tests,
+};
+
+kunit_test_suite(drm_modes_analog_tv_test_suite);
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index b0c680e6f670..c613f0abe9dc 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -468,6 +468,23 @@ bool drm_mode_is_420_also(const struct drm_display_info *display,
 bool drm_mode_is_420(const struct drm_display_info *display,
 		     const struct drm_display_mode *mode);
 
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+					    enum drm_connector_tv_mode mode,
+					    unsigned long pixel_clock_hz,
+					    unsigned int hdisplay,
+					    unsigned int vdisplay,
+					    bool interlace);
+
+static inline struct drm_display_mode *drm_mode_analog_ntsc_480i(struct drm_device *dev)
+{
+	return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_NTSC, 13500000, 720, 480, true);
+}
+
+static inline struct drm_display_mode *drm_mode_analog_pal_576i(struct drm_device *dev)
+{
+	return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_PAL, 13500000, 720, 576, true);
+}
+
 struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
 				      int hdisplay, int vdisplay, int vrefresh,
 				      bool reduced, bool interlaced,

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 07/25] drm/modes: Add a function to generate analog display modes

[Maxime Ripard]

Multiple drivers (meson, vc4, sun4i) define analog TV 525-lines and
625-lines modes in their drivers.

Since those modes are fairly standard, and that we'll need to use them
in more places in the future, it makes sense to move their definition
into the core framework.

However, analog display usually have fairly loose timings requirements,
the only discrete parameters being the total number of lines and pixel
clock frequency. Thus, we created a function that will create a display
mode from the standard, the pixel frequency and the active area.

Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Rename the tests
- Switch to kunit_test_suite

Changes in v6:
- Fix typo

Changes in v4:
- Reworded the line length check comment
- Switch to HZ_PER_KHZ in tests
- Use previous timing to fill our mode
- Move the number of lines check earlier
---
 drivers/gpu/drm/drm_modes.c            | 474 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/tests/Makefile         |   1 +
 drivers/gpu/drm/tests/drm_modes_test.c | 142 ++++++++++
 include/drm/drm_modes.h                |  17 ++
 4 files changed, 634 insertions(+)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 5d4ac79381c4..71c050c3ee6b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -116,6 +116,480 @@ void drm_mode_probed_add(struct drm_connector *connector,
 }
 EXPORT_SYMBOL(drm_mode_probed_add);
 
+enum drm_mode_analog {
+	DRM_MODE_ANALOG_NTSC, /* 525 lines, 60Hz */
+	DRM_MODE_ANALOG_PAL, /* 625 lines, 50Hz */
+};
+
+/*
+ * The timings come from:
+ * - https://web.archive.org/web/20220406232708/http://www.kolumbus.fi/pami1/video/pal_ntsc.html
+ * - https://web.archive.org/web/20220406124914/http://martin.hinner.info/vga/pal.html
+ * - https://web.archive.org/web/20220609202433/http://www.batsocks.co.uk/readme/video_timing.htm
+ */
+#define NTSC_LINE_DURATION_NS		63556U
+#define NTSC_LINES_NUMBER		525
+
+#define NTSC_HBLK_DURATION_TYP_NS	10900U
+#define NTSC_HBLK_DURATION_MIN_NS	(NTSC_HBLK_DURATION_TYP_NS - 200)
+#define NTSC_HBLK_DURATION_MAX_NS	(NTSC_HBLK_DURATION_TYP_NS + 200)
+
+#define NTSC_HACT_DURATION_TYP_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_TYP_NS)
+#define NTSC_HACT_DURATION_MIN_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_MAX_NS)
+#define NTSC_HACT_DURATION_MAX_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_MIN_NS)
+
+#define NTSC_HFP_DURATION_TYP_NS	1500
+#define NTSC_HFP_DURATION_MIN_NS	1270
+#define NTSC_HFP_DURATION_MAX_NS	2220
+
+#define NTSC_HSLEN_DURATION_TYP_NS	4700
+#define NTSC_HSLEN_DURATION_MIN_NS	(NTSC_HSLEN_DURATION_TYP_NS - 100)
+#define NTSC_HSLEN_DURATION_MAX_NS	(NTSC_HSLEN_DURATION_TYP_NS + 100)
+
+#define NTSC_HBP_DURATION_TYP_NS	4700
+
+/*
+ * I couldn't find the actual tolerance for the back porch, so let's
+ * just reuse the sync length ones.
+ */
+#define NTSC_HBP_DURATION_MIN_NS	(NTSC_HBP_DURATION_TYP_NS - 100)
+#define NTSC_HBP_DURATION_MAX_NS	(NTSC_HBP_DURATION_TYP_NS + 100)
+
+#define PAL_LINE_DURATION_NS		64000U
+#define PAL_LINES_NUMBER		625
+
+#define PAL_HACT_DURATION_TYP_NS	51950U
+#define PAL_HACT_DURATION_MIN_NS	(PAL_HACT_DURATION_TYP_NS - 100)
+#define PAL_HACT_DURATION_MAX_NS	(PAL_HACT_DURATION_TYP_NS + 400)
+
+#define PAL_HBLK_DURATION_TYP_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_TYP_NS)
+#define PAL_HBLK_DURATION_MIN_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_MAX_NS)
+#define PAL_HBLK_DURATION_MAX_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_MIN_NS)
+
+#define PAL_HFP_DURATION_TYP_NS		1650
+#define PAL_HFP_DURATION_MIN_NS		(PAL_HFP_DURATION_TYP_NS - 100)
+#define PAL_HFP_DURATION_MAX_NS		(PAL_HFP_DURATION_TYP_NS + 400)
+
+#define PAL_HSLEN_DURATION_TYP_NS	4700
+#define PAL_HSLEN_DURATION_MIN_NS	(PAL_HSLEN_DURATION_TYP_NS - 200)
+#define PAL_HSLEN_DURATION_MAX_NS	(PAL_HSLEN_DURATION_TYP_NS + 200)
+
+#define PAL_HBP_DURATION_TYP_NS		5700
+#define PAL_HBP_DURATION_MIN_NS		(PAL_HBP_DURATION_TYP_NS - 200)
+#define PAL_HBP_DURATION_MAX_NS		(PAL_HBP_DURATION_TYP_NS + 200)
+
+struct analog_param_field {
+	unsigned int even, odd;
+};
+
+#define PARAM_FIELD(_odd, _even)		\
+	{ .even = _even, .odd = _odd }
+
+struct analog_param_range {
+	unsigned int	min, typ, max;
+};
+
+#define PARAM_RANGE(_min, _typ, _max)		\
+	{ .min = _min, .typ = _typ, .max = _max }
+
+struct analog_parameters {
+	unsigned int			num_lines;
+	unsigned int			line_duration_ns;
+
+	struct analog_param_range	hact_ns;
+	struct analog_param_range	hfp_ns;
+	struct analog_param_range	hslen_ns;
+	struct analog_param_range	hbp_ns;
+	struct analog_param_range	hblk_ns;
+
+	unsigned int			bt601_hfp;
+
+	struct analog_param_field	vfp_lines;
+	struct analog_param_field	vslen_lines;
+	struct analog_param_field	vbp_lines;
+};
+
+#define TV_MODE_PARAMETER(_mode, _lines, _line_dur, _hact, _hfp, _hslen, _hbp, _hblk, _bt601_hfp, _vfp, _vslen, _vbp) \
+	[_mode] = {							\
+		.num_lines = _lines,					\
+		.line_duration_ns = _line_dur,				\
+		.hact_ns = _hact,					\
+		.hfp_ns = _hfp,						\
+		.hslen_ns = _hslen,					\
+		.hbp_ns = _hbp,						\
+		.hblk_ns = _hblk,					\
+		.bt601_hfp = _bt601_hfp,				\
+		.vfp_lines = _vfp,					\
+		.vslen_lines = _vslen,					\
+		.vbp_lines = _vbp,					\
+	}
+
+const static struct analog_parameters tv_modes_parameters[] = {
+	TV_MODE_PARAMETER(DRM_MODE_ANALOG_NTSC,
+			  NTSC_LINES_NUMBER,
+			  NTSC_LINE_DURATION_NS,
+			  PARAM_RANGE(NTSC_HACT_DURATION_MIN_NS,
+				      NTSC_HACT_DURATION_TYP_NS,
+				      NTSC_HACT_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HFP_DURATION_MIN_NS,
+				      NTSC_HFP_DURATION_TYP_NS,
+				      NTSC_HFP_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HSLEN_DURATION_MIN_NS,
+				      NTSC_HSLEN_DURATION_TYP_NS,
+				      NTSC_HSLEN_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HBP_DURATION_MIN_NS,
+				      NTSC_HBP_DURATION_TYP_NS,
+				      NTSC_HBP_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HBLK_DURATION_MIN_NS,
+				      NTSC_HBLK_DURATION_TYP_NS,
+				      NTSC_HBLK_DURATION_MAX_NS),
+			  16,
+			  PARAM_FIELD(3, 3),
+			  PARAM_FIELD(3, 3),
+			  PARAM_FIELD(16, 17)),
+	TV_MODE_PARAMETER(DRM_MODE_ANALOG_PAL,
+			  PAL_LINES_NUMBER,
+			  PAL_LINE_DURATION_NS,
+			  PARAM_RANGE(PAL_HACT_DURATION_MIN_NS,
+				      PAL_HACT_DURATION_TYP_NS,
+				      PAL_HACT_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HFP_DURATION_MIN_NS,
+				      PAL_HFP_DURATION_TYP_NS,
+				      PAL_HFP_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HSLEN_DURATION_MIN_NS,
+				      PAL_HSLEN_DURATION_TYP_NS,
+				      PAL_HSLEN_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HBP_DURATION_MIN_NS,
+				      PAL_HBP_DURATION_TYP_NS,
+				      PAL_HBP_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HBLK_DURATION_MIN_NS,
+				      PAL_HBLK_DURATION_TYP_NS,
+				      PAL_HBLK_DURATION_MAX_NS),
+			  12,
+
+			  /*
+			   * The front porch is actually 6 short sync
+			   * pulses for the even field, and 5 for the
+			   * odd field. Each sync takes half a life so
+			   * the odd field front porch is shorter by
+			   * half a line.
+			   *
+			   * In progressive, we're supposed to use 6
+			   * pulses, so we're fine there
+			   */
+			  PARAM_FIELD(3, 2),
+
+			  /*
+			   * The vsync length is 5 long sync pulses,
+			   * each field taking half a line. We're
+			   * shorter for both fields by half a line.
+			   *
+			   * In progressive, we're supposed to use 5
+			   * pulses, so we're off by half
+			   * a line.
+			   *
+			   * In interlace, we're now off by half a line
+			   * for the even field and one line for the odd
+			   * field.
+			   */
+			  PARAM_FIELD(3, 3),
+
+			  /*
+			   * The back porch starts with post-equalizing
+			   * pulses, consisting in 5 short sync pulses
+			   * for the even field, 4 for the odd field. In
+			   * progressive, it's 5 short syncs.
+			   *
+			   * In progressive, we thus have 2.5 lines,
+			   * plus the 0.5 line we were missing
+			   * previously, so we should use 3 lines.
+			   *
+			   * In interlace, the even field is in the
+			   * exact same case than progressive. For the
+			   * odd field, we should be using 2 lines but
+			   * we're one line short, so we'll make up for
+			   * it here by using 3.
+			   *
+			   * The entire blanking area is supposed to
+			   * take 25 lines, so we also need to account
+			   * for the rest of the blanking area that
+			   * can't be in either the front porch or sync
+			   * period.
+			   */
+			  PARAM_FIELD(19, 20)),
+};
+
+static int fill_analog_mode(struct drm_device *dev,
+			    struct drm_display_mode *mode,
+			    const struct analog_parameters *params,
+			    unsigned long pixel_clock_hz,
+			    unsigned int hactive,
+			    unsigned int vactive,
+			    bool interlace)
+{
+	unsigned long pixel_duration_ns = NSEC_PER_SEC / pixel_clock_hz;
+	unsigned int htotal, vtotal;
+	unsigned int max_hact, hact_duration_ns;
+	unsigned int hblk, hblk_duration_ns;
+	unsigned int hfp, hfp_duration_ns;
+	unsigned int hslen, hslen_duration_ns;
+	unsigned int hbp, hbp_duration_ns;
+	unsigned int porches, porches_duration_ns;
+	unsigned int vfp, vfp_min;
+	unsigned int vbp, vbp_min;
+	unsigned int vslen;
+	bool bt601 = false;
+	int porches_rem;
+	u64 result;
+
+	drm_dbg_kms(dev,
+		    "Generating a %ux%u%c, %u-line mode with a %lu kHz clock\n",
+		    hactive, vactive,
+		    interlace ? 'i' : 'p',
+		    params->num_lines,
+		    pixel_clock_hz / 1000);
+
+	max_hact = params->hact_ns.max / pixel_duration_ns;
+	if (pixel_clock_hz == 13500000 && hactive > max_hact && hactive <= 720) {
+		drm_dbg_kms(dev, "Trying to generate a BT.601 mode. Disabling checks.\n");
+		bt601 = true;
+	}
+
+	/*
+	 * Our pixel duration is going to be round down by the division,
+	 * so rounding up is probably going to introduce even more
+	 * deviation.
+	 */
+	result = (u64)params->line_duration_ns * pixel_clock_hz;
+	do_div(result, NSEC_PER_SEC);
+	htotal = result;
+
+	drm_dbg_kms(dev, "Total Horizontal Number of Pixels: %u\n", htotal);
+
+	hact_duration_ns = hactive * pixel_duration_ns;
+	if (!bt601 &&
+	    (hact_duration_ns < params->hact_ns.min ||
+	     hact_duration_ns > params->hact_ns.max)) {
+		DRM_ERROR("Invalid horizontal active area duration: %uns (min: %u, max %u)\n",
+			  hact_duration_ns, params->hact_ns.min, params->hact_ns.max);
+		return -EINVAL;
+	}
+
+	hblk = htotal - hactive;
+	drm_dbg_kms(dev, "Horizontal Blanking Period: %u\n", hblk);
+
+	hblk_duration_ns = hblk * pixel_duration_ns;
+	if (!bt601 &&
+	    (hblk_duration_ns < params->hblk_ns.min ||
+	     hblk_duration_ns > params->hblk_ns.max)) {
+		DRM_ERROR("Invalid horizontal blanking duration: %uns (min: %u, max %u)\n",
+			  hblk_duration_ns, params->hblk_ns.min, params->hblk_ns.max);
+		return -EINVAL;
+	}
+
+	hslen = DIV_ROUND_UP(params->hslen_ns.typ, pixel_duration_ns);
+	drm_dbg_kms(dev, "Horizontal Sync Period: %u\n", hslen);
+
+	hslen_duration_ns = hslen * pixel_duration_ns;
+	if (!bt601 &&
+	    (hslen_duration_ns < params->hslen_ns.min ||
+	     hslen_duration_ns > params->hslen_ns.max)) {
+		DRM_ERROR("Invalid horizontal sync duration: %uns (min: %u, max %u)\n",
+			  hslen_duration_ns, params->hslen_ns.min, params->hslen_ns.max);
+		return -EINVAL;
+	}
+
+	porches = hblk - hslen;
+	drm_dbg_kms(dev, "Remaining horizontal pixels for both porches: %u\n", porches);
+
+	porches_duration_ns = porches * pixel_duration_ns;
+	if (!bt601 &&
+	    (porches_duration_ns > (params->hfp_ns.max + params->hbp_ns.max) ||
+	     porches_duration_ns < (params->hfp_ns.min + params->hbp_ns.min))) {
+		DRM_ERROR("Invalid horizontal porches duration: %uns\n", porches_duration_ns);
+		return -EINVAL;
+	}
+
+	if (bt601) {
+		hfp = params->bt601_hfp;
+	} else {
+		unsigned int hfp_min = DIV_ROUND_UP(params->hfp_ns.min,
+						    pixel_duration_ns);
+		unsigned int hbp_min = DIV_ROUND_UP(params->hbp_ns.min,
+						    pixel_duration_ns);
+		 int porches_rem = porches - hfp_min - hbp_min;
+
+		hfp = hfp_min + DIV_ROUND_UP(porches_rem, 2);
+	}
+
+	drm_dbg_kms(dev, "Horizontal Front Porch: %u\n", hfp);
+
+	hfp_duration_ns = hfp * pixel_duration_ns;
+	if (!bt601 &&
+	    (hfp_duration_ns < params->hfp_ns.min ||
+	     hfp_duration_ns > params->hfp_ns.max)) {
+		DRM_ERROR("Invalid horizontal front porch duration: %uns (min: %u, max %u)\n",
+			  hfp_duration_ns, params->hfp_ns.min, params->hfp_ns.max);
+		return -EINVAL;
+	}
+
+	hbp = porches - hfp;
+	drm_dbg_kms(dev, "Horizontal Back Porch: %u\n", hbp);
+
+	hbp_duration_ns = hbp * pixel_duration_ns;
+	if (!bt601 &&
+	    (hbp_duration_ns < params->hbp_ns.min ||
+	     hbp_duration_ns > params->hbp_ns.max)) {
+		DRM_ERROR("Invalid horizontal back porch duration: %uns (min: %u, max %u)\n",
+			  hbp_duration_ns, params->hbp_ns.min, params->hbp_ns.max);
+		return -EINVAL;
+	}
+
+	if (htotal != (hactive + hfp + hslen + hbp))
+		return -EINVAL;
+
+	mode->clock = pixel_clock_hz / 1000;
+	mode->hdisplay = hactive;
+	mode->hsync_start = mode->hdisplay + hfp;
+	mode->hsync_end = mode->hsync_start + hslen;
+	mode->htotal = mode->hsync_end + hbp;
+
+	if (interlace) {
+		vfp_min = params->vfp_lines.even + params->vfp_lines.odd;
+		vbp_min = params->vbp_lines.even + params->vbp_lines.odd;
+		vslen = params->vslen_lines.even + params->vslen_lines.odd;
+	} else {
+		/*
+		 * By convention, NTSC (aka 525/60) systems start with
+		 * the even field, but PAL (aka 625/50) systems start
+		 * with the odd one.
+		 *
+		 * PAL systems also have asymetric timings between the
+		 * even and odd field, while NTSC is symetric.
+		 *
+		 * Moreover, if we want to create a progressive mode for
+		 * PAL, we need to use the odd field timings.
+		 *
+		 * Since odd == even for NTSC, we can just use the odd
+		 * one all the time to simplify the code a bit.
+		 */
+		vfp_min = params->vfp_lines.odd;
+		vbp_min = params->vbp_lines.odd;
+		vslen = params->vslen_lines.odd;
+	}
+
+	drm_dbg_kms(dev, "Vertical Sync Period: %u\n", vslen);
+
+	porches = params->num_lines - vactive - vslen;
+	drm_dbg_kms(dev, "Remaining vertical pixels for both porches: %u\n", porches);
+
+	porches_rem = porches - vfp_min - vbp_min;
+	vfp = vfp_min + (porches_rem / 2);
+	drm_dbg_kms(dev, "Vertical Front Porch: %u\n", vfp);
+
+	vbp = porches - vfp;
+	drm_dbg_kms(dev, "Vertical Back Porch: %u\n", vbp);
+
+	vtotal = vactive + vfp + vslen + vbp;
+	if (params->num_lines != vtotal) {
+		DRM_ERROR("Invalid vertical total: %upx (expected %upx)\n",
+			  vtotal, params->num_lines);
+		return -EINVAL;
+	}
+
+	mode->vdisplay = vactive;
+	mode->vsync_start = mode->vdisplay + vfp;
+	mode->vsync_end = mode->vsync_start + vslen;
+	mode->vtotal = mode->vsync_end + vbp;
+
+	if (mode->vtotal != params->num_lines)
+		return -EINVAL;
+
+	mode->type = DRM_MODE_TYPE_DRIVER;
+	mode->flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC;
+	if (interlace)
+		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+	drm_mode_set_name(mode);
+
+	drm_dbg_kms(dev, "Generated mode " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
+
+	return 0;
+}
+
+/**
+ * drm_analog_tv_mode - create a display mode for an analog TV
+ * @dev: drm device
+ * @tv_mode: TV Mode standard to create a mode for. See DRM_MODE_TV_MODE_*.
+ * @pixel_clock_hz: Pixel Clock Frequency, in Hertz
+ * @hdisplay: hdisplay size
+ * @vdisplay: vdisplay size
+ * @interlace: whether to compute an interlaced mode
+ *
+ * This function creates a struct drm_display_mode instance suited for
+ * an analog TV output, for one of the usual analog TV mode.
+ *
+ * Note that @hdisplay is larger than the usual constraints for the PAL
+ * and NTSC timings, and we'll choose to ignore most timings constraints
+ * to reach those resolutions.
+ *
+ * Returns:
+ *
+ * A pointer to the mode, allocated with drm_mode_create(). Returns NULL
+ * on error.
+ */
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+					    enum drm_connector_tv_mode tv_mode,
+					    unsigned long pixel_clock_hz,
+					    unsigned int hdisplay,
+					    unsigned int vdisplay,
+					    bool interlace)
+{
+	struct drm_display_mode *mode;
+	enum drm_mode_analog analog;
+	int ret;
+
+	switch (tv_mode) {
+	case DRM_MODE_TV_MODE_NTSC:
+		fallthrough;
+	case DRM_MODE_TV_MODE_NTSC_443:
+		fallthrough;
+	case DRM_MODE_TV_MODE_NTSC_J:
+		fallthrough;
+	case DRM_MODE_TV_MODE_PAL_M:
+		analog = DRM_MODE_ANALOG_NTSC;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL:
+		fallthrough;
+	case DRM_MODE_TV_MODE_PAL_N:
+		fallthrough;
+	case DRM_MODE_TV_MODE_SECAM:
+		analog = DRM_MODE_ANALOG_PAL;
+		break;
+
+	default:
+		return NULL;
+	}
+
+	mode = drm_mode_create(dev);
+	if (!mode)
+		return NULL;
+
+	ret = fill_analog_mode(dev, mode,
+			       &tv_modes_parameters[analog],
+			       pixel_clock_hz, hdisplay, vdisplay, interlace);
+	if (ret)
+		goto err_free_mode;
+
+	return mode;
+
+err_free_mode:
+	drm_mode_destroy(dev, mode);
+	return NULL;
+}
+EXPORT_SYMBOL(drm_analog_tv_mode);
+
 /**
  * drm_cvt_mode -create a modeline based on the CVT algorithm
  * @dev: drm device
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b29ef1085cad..b22ac96fdd65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -10,5 +10,6 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_framebuffer_test.o \
 	drm_kunit_helpers.o \
 	drm_mm_test.o \
+	drm_modes_test.o \
 	drm_plane_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_modes_test.c b/drivers/gpu/drm/tests/drm_modes_test.c
new file mode 100644
index 000000000000..b3940b4c6022
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_modes_test.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <drm/drm_drv.h>
+#include <drm/drm_modes.h>
+
+#include <kunit/test.h>
+
+#include <linux/units.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_test_modes_priv {
+	struct drm_device *drm;
+};
+
+static int drm_test_modes_init(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET, "drm-modes-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	test->priv = priv;
+
+	return 0;
+}
+
+static void drm_test_modes_analog_tv_ntsc_480i(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *mode;
+
+	mode = drm_analog_tv_mode(priv->drm,
+				  DRM_MODE_TV_MODE_NTSC,
+				  13500 * HZ_PER_KHZ, 720, 480,
+				  true);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 60);
+	KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+	/* BT.601 defines hsync_start at 736 for 480i */
+	KUNIT_EXPECT_EQ(test, mode->hsync_start, 736);
+
+	/*
+	 * The NTSC standard expects a line to take 63.556us. With a
+	 * pixel clock of 13.5 MHz, a pixel takes around 74ns, so we
+	 * need to have 63556ns / 74ns = 858.
+	 *
+	 * This is also mandated by BT.601.
+	 */
+	KUNIT_EXPECT_EQ(test, mode->htotal, 858);
+
+	KUNIT_EXPECT_EQ(test, mode->vdisplay, 480);
+	KUNIT_EXPECT_EQ(test, mode->vtotal, 525);
+}
+
+static void drm_test_modes_analog_tv_ntsc_480i_inlined(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *expected, *mode;
+
+	expected = drm_analog_tv_mode(priv->drm,
+				      DRM_MODE_TV_MODE_NTSC,
+				      13500 * HZ_PER_KHZ, 720, 480,
+				      true);
+	KUNIT_ASSERT_NOT_NULL(test, expected);
+
+	mode = drm_mode_analog_ntsc_480i(priv->drm);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static void drm_test_modes_analog_tv_pal_576i(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *mode;
+
+	mode = drm_analog_tv_mode(priv->drm,
+				  DRM_MODE_TV_MODE_PAL,
+				  13500 * HZ_PER_KHZ, 720, 576,
+				  true);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 50);
+	KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+	/* BT.601 defines hsync_start at 732 for 576i */
+	KUNIT_EXPECT_EQ(test, mode->hsync_start, 732);
+
+	/*
+	 * The PAL standard expects a line to take 64us. With a pixel
+	 * clock of 13.5 MHz, a pixel takes around 74ns, so we need to
+	 * have 64000ns / 74ns = 864.
+	 *
+	 * This is also mandated by BT.601.
+	 */
+	KUNIT_EXPECT_EQ(test, mode->htotal, 864);
+
+	KUNIT_EXPECT_EQ(test, mode->vdisplay, 576);
+	KUNIT_EXPECT_EQ(test, mode->vtotal, 625);
+}
+
+static void drm_test_modes_analog_tv_pal_576i_inlined(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *expected, *mode;
+
+	expected = drm_analog_tv_mode(priv->drm,
+				      DRM_MODE_TV_MODE_PAL,
+				      13500 * HZ_PER_KHZ, 720, 576,
+				      true);
+	KUNIT_ASSERT_NOT_NULL(test, expected);
+
+	mode = drm_mode_analog_pal_576i(priv->drm);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static struct kunit_case drm_modes_analog_tv_tests[] = {
+	KUNIT_CASE(drm_test_modes_analog_tv_ntsc_480i),
+	KUNIT_CASE(drm_test_modes_analog_tv_ntsc_480i_inlined),
+	KUNIT_CASE(drm_test_modes_analog_tv_pal_576i),
+	KUNIT_CASE(drm_test_modes_analog_tv_pal_576i_inlined),
+	{ }
+};
+
+static struct kunit_suite drm_modes_analog_tv_test_suite = {
+	.name = "drm_modes_analog_tv",
+	.init = drm_test_modes_init,
+	.test_cases = drm_modes_analog_tv_tests,
+};
+
+kunit_test_suite(drm_modes_analog_tv_test_suite);
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index b0c680e6f670..c613f0abe9dc 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -468,6 +468,23 @@ bool drm_mode_is_420_also(const struct drm_display_info *display,
 bool drm_mode_is_420(const struct drm_display_info *display,
 		     const struct drm_display_mode *mode);
 
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+					    enum drm_connector_tv_mode mode,
+					    unsigned long pixel_clock_hz,
+					    unsigned int hdisplay,
+					    unsigned int vdisplay,
+					    bool interlace);
+
+static inline struct drm_display_mode *drm_mode_analog_ntsc_480i(struct drm_device *dev)
+{
+	return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_NTSC, 13500000, 720, 480, true);
+}
+
+static inline struct drm_display_mode *drm_mode_analog_pal_576i(struct drm_device *dev)
+{
+	return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_PAL, 13500000, 720, 576, true);
+}
+
 struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
 				      int hdisplay, int vdisplay, int vrefresh,
 				      bool reduced, bool interlaced,

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 07/25] drm/modes: Add a function to generate analog display modes

[Maxime Ripard]

Multiple drivers (meson, vc4, sun4i) define analog TV 525-lines and
625-lines modes in their drivers.

Since those modes are fairly standard, and that we'll need to use them
in more places in the future, it makes sense to move their definition
into the core framework.

However, analog display usually have fairly loose timings requirements,
the only discrete parameters being the total number of lines and pixel
clock frequency. Thus, we created a function that will create a display
mode from the standard, the pixel frequency and the active area.

Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Rename the tests
- Switch to kunit_test_suite

Changes in v6:
- Fix typo

Changes in v4:
- Reworded the line length check comment
- Switch to HZ_PER_KHZ in tests
- Use previous timing to fill our mode
- Move the number of lines check earlier
---
 drivers/gpu/drm/drm_modes.c            | 474 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/tests/Makefile         |   1 +
 drivers/gpu/drm/tests/drm_modes_test.c | 142 ++++++++++
 include/drm/drm_modes.h                |  17 ++
 4 files changed, 634 insertions(+)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 5d4ac79381c4..71c050c3ee6b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -116,6 +116,480 @@ void drm_mode_probed_add(struct drm_connector *connector,
 }
 EXPORT_SYMBOL(drm_mode_probed_add);
 
+enum drm_mode_analog {
+	DRM_MODE_ANALOG_NTSC, /* 525 lines, 60Hz */
+	DRM_MODE_ANALOG_PAL, /* 625 lines, 50Hz */
+};
+
+/*
+ * The timings come from:
+ * - https://web.archive.org/web/20220406232708/http://www.kolumbus.fi/pami1/video/pal_ntsc.html
+ * - https://web.archive.org/web/20220406124914/http://martin.hinner.info/vga/pal.html
+ * - https://web.archive.org/web/20220609202433/http://www.batsocks.co.uk/readme/video_timing.htm
+ */
+#define NTSC_LINE_DURATION_NS		63556U
+#define NTSC_LINES_NUMBER		525
+
+#define NTSC_HBLK_DURATION_TYP_NS	10900U
+#define NTSC_HBLK_DURATION_MIN_NS	(NTSC_HBLK_DURATION_TYP_NS - 200)
+#define NTSC_HBLK_DURATION_MAX_NS	(NTSC_HBLK_DURATION_TYP_NS + 200)
+
+#define NTSC_HACT_DURATION_TYP_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_TYP_NS)
+#define NTSC_HACT_DURATION_MIN_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_MAX_NS)
+#define NTSC_HACT_DURATION_MAX_NS	(NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_MIN_NS)
+
+#define NTSC_HFP_DURATION_TYP_NS	1500
+#define NTSC_HFP_DURATION_MIN_NS	1270
+#define NTSC_HFP_DURATION_MAX_NS	2220
+
+#define NTSC_HSLEN_DURATION_TYP_NS	4700
+#define NTSC_HSLEN_DURATION_MIN_NS	(NTSC_HSLEN_DURATION_TYP_NS - 100)
+#define NTSC_HSLEN_DURATION_MAX_NS	(NTSC_HSLEN_DURATION_TYP_NS + 100)
+
+#define NTSC_HBP_DURATION_TYP_NS	4700
+
+/*
+ * I couldn't find the actual tolerance for the back porch, so let's
+ * just reuse the sync length ones.
+ */
+#define NTSC_HBP_DURATION_MIN_NS	(NTSC_HBP_DURATION_TYP_NS - 100)
+#define NTSC_HBP_DURATION_MAX_NS	(NTSC_HBP_DURATION_TYP_NS + 100)
+
+#define PAL_LINE_DURATION_NS		64000U
+#define PAL_LINES_NUMBER		625
+
+#define PAL_HACT_DURATION_TYP_NS	51950U
+#define PAL_HACT_DURATION_MIN_NS	(PAL_HACT_DURATION_TYP_NS - 100)
+#define PAL_HACT_DURATION_MAX_NS	(PAL_HACT_DURATION_TYP_NS + 400)
+
+#define PAL_HBLK_DURATION_TYP_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_TYP_NS)
+#define PAL_HBLK_DURATION_MIN_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_MAX_NS)
+#define PAL_HBLK_DURATION_MAX_NS	(PAL_LINE_DURATION_NS - PAL_HACT_DURATION_MIN_NS)
+
+#define PAL_HFP_DURATION_TYP_NS		1650
+#define PAL_HFP_DURATION_MIN_NS		(PAL_HFP_DURATION_TYP_NS - 100)
+#define PAL_HFP_DURATION_MAX_NS		(PAL_HFP_DURATION_TYP_NS + 400)
+
+#define PAL_HSLEN_DURATION_TYP_NS	4700
+#define PAL_HSLEN_DURATION_MIN_NS	(PAL_HSLEN_DURATION_TYP_NS - 200)
+#define PAL_HSLEN_DURATION_MAX_NS	(PAL_HSLEN_DURATION_TYP_NS + 200)
+
+#define PAL_HBP_DURATION_TYP_NS		5700
+#define PAL_HBP_DURATION_MIN_NS		(PAL_HBP_DURATION_TYP_NS - 200)
+#define PAL_HBP_DURATION_MAX_NS		(PAL_HBP_DURATION_TYP_NS + 200)
+
+struct analog_param_field {
+	unsigned int even, odd;
+};
+
+#define PARAM_FIELD(_odd, _even)		\
+	{ .even = _even, .odd = _odd }
+
+struct analog_param_range {
+	unsigned int	min, typ, max;
+};
+
+#define PARAM_RANGE(_min, _typ, _max)		\
+	{ .min = _min, .typ = _typ, .max = _max }
+
+struct analog_parameters {
+	unsigned int			num_lines;
+	unsigned int			line_duration_ns;
+
+	struct analog_param_range	hact_ns;
+	struct analog_param_range	hfp_ns;
+	struct analog_param_range	hslen_ns;
+	struct analog_param_range	hbp_ns;
+	struct analog_param_range	hblk_ns;
+
+	unsigned int			bt601_hfp;
+
+	struct analog_param_field	vfp_lines;
+	struct analog_param_field	vslen_lines;
+	struct analog_param_field	vbp_lines;
+};
+
+#define TV_MODE_PARAMETER(_mode, _lines, _line_dur, _hact, _hfp, _hslen, _hbp, _hblk, _bt601_hfp, _vfp, _vslen, _vbp) \
+	[_mode] = {							\
+		.num_lines = _lines,					\
+		.line_duration_ns = _line_dur,				\
+		.hact_ns = _hact,					\
+		.hfp_ns = _hfp,						\
+		.hslen_ns = _hslen,					\
+		.hbp_ns = _hbp,						\
+		.hblk_ns = _hblk,					\
+		.bt601_hfp = _bt601_hfp,				\
+		.vfp_lines = _vfp,					\
+		.vslen_lines = _vslen,					\
+		.vbp_lines = _vbp,					\
+	}
+
+const static struct analog_parameters tv_modes_parameters[] = {
+	TV_MODE_PARAMETER(DRM_MODE_ANALOG_NTSC,
+			  NTSC_LINES_NUMBER,
+			  NTSC_LINE_DURATION_NS,
+			  PARAM_RANGE(NTSC_HACT_DURATION_MIN_NS,
+				      NTSC_HACT_DURATION_TYP_NS,
+				      NTSC_HACT_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HFP_DURATION_MIN_NS,
+				      NTSC_HFP_DURATION_TYP_NS,
+				      NTSC_HFP_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HSLEN_DURATION_MIN_NS,
+				      NTSC_HSLEN_DURATION_TYP_NS,
+				      NTSC_HSLEN_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HBP_DURATION_MIN_NS,
+				      NTSC_HBP_DURATION_TYP_NS,
+				      NTSC_HBP_DURATION_MAX_NS),
+			  PARAM_RANGE(NTSC_HBLK_DURATION_MIN_NS,
+				      NTSC_HBLK_DURATION_TYP_NS,
+				      NTSC_HBLK_DURATION_MAX_NS),
+			  16,
+			  PARAM_FIELD(3, 3),
+			  PARAM_FIELD(3, 3),
+			  PARAM_FIELD(16, 17)),
+	TV_MODE_PARAMETER(DRM_MODE_ANALOG_PAL,
+			  PAL_LINES_NUMBER,
+			  PAL_LINE_DURATION_NS,
+			  PARAM_RANGE(PAL_HACT_DURATION_MIN_NS,
+				      PAL_HACT_DURATION_TYP_NS,
+				      PAL_HACT_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HFP_DURATION_MIN_NS,
+				      PAL_HFP_DURATION_TYP_NS,
+				      PAL_HFP_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HSLEN_DURATION_MIN_NS,
+				      PAL_HSLEN_DURATION_TYP_NS,
+				      PAL_HSLEN_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HBP_DURATION_MIN_NS,
+				      PAL_HBP_DURATION_TYP_NS,
+				      PAL_HBP_DURATION_MAX_NS),
+			  PARAM_RANGE(PAL_HBLK_DURATION_MIN_NS,
+				      PAL_HBLK_DURATION_TYP_NS,
+				      PAL_HBLK_DURATION_MAX_NS),
+			  12,
+
+			  /*
+			   * The front porch is actually 6 short sync
+			   * pulses for the even field, and 5 for the
+			   * odd field. Each sync takes half a life so
+			   * the odd field front porch is shorter by
+			   * half a line.
+			   *
+			   * In progressive, we're supposed to use 6
+			   * pulses, so we're fine there
+			   */
+			  PARAM_FIELD(3, 2),
+
+			  /*
+			   * The vsync length is 5 long sync pulses,
+			   * each field taking half a line. We're
+			   * shorter for both fields by half a line.
+			   *
+			   * In progressive, we're supposed to use 5
+			   * pulses, so we're off by half
+			   * a line.
+			   *
+			   * In interlace, we're now off by half a line
+			   * for the even field and one line for the odd
+			   * field.
+			   */
+			  PARAM_FIELD(3, 3),
+
+			  /*
+			   * The back porch starts with post-equalizing
+			   * pulses, consisting in 5 short sync pulses
+			   * for the even field, 4 for the odd field. In
+			   * progressive, it's 5 short syncs.
+			   *
+			   * In progressive, we thus have 2.5 lines,
+			   * plus the 0.5 line we were missing
+			   * previously, so we should use 3 lines.
+			   *
+			   * In interlace, the even field is in the
+			   * exact same case than progressive. For the
+			   * odd field, we should be using 2 lines but
+			   * we're one line short, so we'll make up for
+			   * it here by using 3.
+			   *
+			   * The entire blanking area is supposed to
+			   * take 25 lines, so we also need to account
+			   * for the rest of the blanking area that
+			   * can't be in either the front porch or sync
+			   * period.
+			   */
+			  PARAM_FIELD(19, 20)),
+};
+
+static int fill_analog_mode(struct drm_device *dev,
+			    struct drm_display_mode *mode,
+			    const struct analog_parameters *params,
+			    unsigned long pixel_clock_hz,
+			    unsigned int hactive,
+			    unsigned int vactive,
+			    bool interlace)
+{
+	unsigned long pixel_duration_ns = NSEC_PER_SEC / pixel_clock_hz;
+	unsigned int htotal, vtotal;
+	unsigned int max_hact, hact_duration_ns;
+	unsigned int hblk, hblk_duration_ns;
+	unsigned int hfp, hfp_duration_ns;
+	unsigned int hslen, hslen_duration_ns;
+	unsigned int hbp, hbp_duration_ns;
+	unsigned int porches, porches_duration_ns;
+	unsigned int vfp, vfp_min;
+	unsigned int vbp, vbp_min;
+	unsigned int vslen;
+	bool bt601 = false;
+	int porches_rem;
+	u64 result;
+
+	drm_dbg_kms(dev,
+		    "Generating a %ux%u%c, %u-line mode with a %lu kHz clock\n",
+		    hactive, vactive,
+		    interlace ? 'i' : 'p',
+		    params->num_lines,
+		    pixel_clock_hz / 1000);
+
+	max_hact = params->hact_ns.max / pixel_duration_ns;
+	if (pixel_clock_hz == 13500000 && hactive > max_hact && hactive <= 720) {
+		drm_dbg_kms(dev, "Trying to generate a BT.601 mode. Disabling checks.\n");
+		bt601 = true;
+	}
+
+	/*
+	 * Our pixel duration is going to be round down by the division,
+	 * so rounding up is probably going to introduce even more
+	 * deviation.
+	 */
+	result = (u64)params->line_duration_ns * pixel_clock_hz;
+	do_div(result, NSEC_PER_SEC);
+	htotal = result;
+
+	drm_dbg_kms(dev, "Total Horizontal Number of Pixels: %u\n", htotal);
+
+	hact_duration_ns = hactive * pixel_duration_ns;
+	if (!bt601 &&
+	    (hact_duration_ns < params->hact_ns.min ||
+	     hact_duration_ns > params->hact_ns.max)) {
+		DRM_ERROR("Invalid horizontal active area duration: %uns (min: %u, max %u)\n",
+			  hact_duration_ns, params->hact_ns.min, params->hact_ns.max);
+		return -EINVAL;
+	}
+
+	hblk = htotal - hactive;
+	drm_dbg_kms(dev, "Horizontal Blanking Period: %u\n", hblk);
+
+	hblk_duration_ns = hblk * pixel_duration_ns;
+	if (!bt601 &&
+	    (hblk_duration_ns < params->hblk_ns.min ||
+	     hblk_duration_ns > params->hblk_ns.max)) {
+		DRM_ERROR("Invalid horizontal blanking duration: %uns (min: %u, max %u)\n",
+			  hblk_duration_ns, params->hblk_ns.min, params->hblk_ns.max);
+		return -EINVAL;
+	}
+
+	hslen = DIV_ROUND_UP(params->hslen_ns.typ, pixel_duration_ns);
+	drm_dbg_kms(dev, "Horizontal Sync Period: %u\n", hslen);
+
+	hslen_duration_ns = hslen * pixel_duration_ns;
+	if (!bt601 &&
+	    (hslen_duration_ns < params->hslen_ns.min ||
+	     hslen_duration_ns > params->hslen_ns.max)) {
+		DRM_ERROR("Invalid horizontal sync duration: %uns (min: %u, max %u)\n",
+			  hslen_duration_ns, params->hslen_ns.min, params->hslen_ns.max);
+		return -EINVAL;
+	}
+
+	porches = hblk - hslen;
+	drm_dbg_kms(dev, "Remaining horizontal pixels for both porches: %u\n", porches);
+
+	porches_duration_ns = porches * pixel_duration_ns;
+	if (!bt601 &&
+	    (porches_duration_ns > (params->hfp_ns.max + params->hbp_ns.max) ||
+	     porches_duration_ns < (params->hfp_ns.min + params->hbp_ns.min))) {
+		DRM_ERROR("Invalid horizontal porches duration: %uns\n", porches_duration_ns);
+		return -EINVAL;
+	}
+
+	if (bt601) {
+		hfp = params->bt601_hfp;
+	} else {
+		unsigned int hfp_min = DIV_ROUND_UP(params->hfp_ns.min,
+						    pixel_duration_ns);
+		unsigned int hbp_min = DIV_ROUND_UP(params->hbp_ns.min,
+						    pixel_duration_ns);
+		 int porches_rem = porches - hfp_min - hbp_min;
+
+		hfp = hfp_min + DIV_ROUND_UP(porches_rem, 2);
+	}
+
+	drm_dbg_kms(dev, "Horizontal Front Porch: %u\n", hfp);
+
+	hfp_duration_ns = hfp * pixel_duration_ns;
+	if (!bt601 &&
+	    (hfp_duration_ns < params->hfp_ns.min ||
+	     hfp_duration_ns > params->hfp_ns.max)) {
+		DRM_ERROR("Invalid horizontal front porch duration: %uns (min: %u, max %u)\n",
+			  hfp_duration_ns, params->hfp_ns.min, params->hfp_ns.max);
+		return -EINVAL;
+	}
+
+	hbp = porches - hfp;
+	drm_dbg_kms(dev, "Horizontal Back Porch: %u\n", hbp);
+
+	hbp_duration_ns = hbp * pixel_duration_ns;
+	if (!bt601 &&
+	    (hbp_duration_ns < params->hbp_ns.min ||
+	     hbp_duration_ns > params->hbp_ns.max)) {
+		DRM_ERROR("Invalid horizontal back porch duration: %uns (min: %u, max %u)\n",
+			  hbp_duration_ns, params->hbp_ns.min, params->hbp_ns.max);
+		return -EINVAL;
+	}
+
+	if (htotal != (hactive + hfp + hslen + hbp))
+		return -EINVAL;
+
+	mode->clock = pixel_clock_hz / 1000;
+	mode->hdisplay = hactive;
+	mode->hsync_start = mode->hdisplay + hfp;
+	mode->hsync_end = mode->hsync_start + hslen;
+	mode->htotal = mode->hsync_end + hbp;
+
+	if (interlace) {
+		vfp_min = params->vfp_lines.even + params->vfp_lines.odd;
+		vbp_min = params->vbp_lines.even + params->vbp_lines.odd;
+		vslen = params->vslen_lines.even + params->vslen_lines.odd;
+	} else {
+		/*
+		 * By convention, NTSC (aka 525/60) systems start with
+		 * the even field, but PAL (aka 625/50) systems start
+		 * with the odd one.
+		 *
+		 * PAL systems also have asymetric timings between the
+		 * even and odd field, while NTSC is symetric.
+		 *
+		 * Moreover, if we want to create a progressive mode for
+		 * PAL, we need to use the odd field timings.
+		 *
+		 * Since odd == even for NTSC, we can just use the odd
+		 * one all the time to simplify the code a bit.
+		 */
+		vfp_min = params->vfp_lines.odd;
+		vbp_min = params->vbp_lines.odd;
+		vslen = params->vslen_lines.odd;
+	}
+
+	drm_dbg_kms(dev, "Vertical Sync Period: %u\n", vslen);
+
+	porches = params->num_lines - vactive - vslen;
+	drm_dbg_kms(dev, "Remaining vertical pixels for both porches: %u\n", porches);
+
+	porches_rem = porches - vfp_min - vbp_min;
+	vfp = vfp_min + (porches_rem / 2);
+	drm_dbg_kms(dev, "Vertical Front Porch: %u\n", vfp);
+
+	vbp = porches - vfp;
+	drm_dbg_kms(dev, "Vertical Back Porch: %u\n", vbp);
+
+	vtotal = vactive + vfp + vslen + vbp;
+	if (params->num_lines != vtotal) {
+		DRM_ERROR("Invalid vertical total: %upx (expected %upx)\n",
+			  vtotal, params->num_lines);
+		return -EINVAL;
+	}
+
+	mode->vdisplay = vactive;
+	mode->vsync_start = mode->vdisplay + vfp;
+	mode->vsync_end = mode->vsync_start + vslen;
+	mode->vtotal = mode->vsync_end + vbp;
+
+	if (mode->vtotal != params->num_lines)
+		return -EINVAL;
+
+	mode->type = DRM_MODE_TYPE_DRIVER;
+	mode->flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC;
+	if (interlace)
+		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+	drm_mode_set_name(mode);
+
+	drm_dbg_kms(dev, "Generated mode " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
+
+	return 0;
+}
+
+/**
+ * drm_analog_tv_mode - create a display mode for an analog TV
+ * @dev: drm device
+ * @tv_mode: TV Mode standard to create a mode for. See DRM_MODE_TV_MODE_*.
+ * @pixel_clock_hz: Pixel Clock Frequency, in Hertz
+ * @hdisplay: hdisplay size
+ * @vdisplay: vdisplay size
+ * @interlace: whether to compute an interlaced mode
+ *
+ * This function creates a struct drm_display_mode instance suited for
+ * an analog TV output, for one of the usual analog TV mode.
+ *
+ * Note that @hdisplay is larger than the usual constraints for the PAL
+ * and NTSC timings, and we'll choose to ignore most timings constraints
+ * to reach those resolutions.
+ *
+ * Returns:
+ *
+ * A pointer to the mode, allocated with drm_mode_create(). Returns NULL
+ * on error.
+ */
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+					    enum drm_connector_tv_mode tv_mode,
+					    unsigned long pixel_clock_hz,
+					    unsigned int hdisplay,
+					    unsigned int vdisplay,
+					    bool interlace)
+{
+	struct drm_display_mode *mode;
+	enum drm_mode_analog analog;
+	int ret;
+
+	switch (tv_mode) {
+	case DRM_MODE_TV_MODE_NTSC:
+		fallthrough;
+	case DRM_MODE_TV_MODE_NTSC_443:
+		fallthrough;
+	case DRM_MODE_TV_MODE_NTSC_J:
+		fallthrough;
+	case DRM_MODE_TV_MODE_PAL_M:
+		analog = DRM_MODE_ANALOG_NTSC;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL:
+		fallthrough;
+	case DRM_MODE_TV_MODE_PAL_N:
+		fallthrough;
+	case DRM_MODE_TV_MODE_SECAM:
+		analog = DRM_MODE_ANALOG_PAL;
+		break;
+
+	default:
+		return NULL;
+	}
+
+	mode = drm_mode_create(dev);
+	if (!mode)
+		return NULL;
+
+	ret = fill_analog_mode(dev, mode,
+			       &tv_modes_parameters[analog],
+			       pixel_clock_hz, hdisplay, vdisplay, interlace);
+	if (ret)
+		goto err_free_mode;
+
+	return mode;
+
+err_free_mode:
+	drm_mode_destroy(dev, mode);
+	return NULL;
+}
+EXPORT_SYMBOL(drm_analog_tv_mode);
+
 /**
  * drm_cvt_mode -create a modeline based on the CVT algorithm
  * @dev: drm device
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b29ef1085cad..b22ac96fdd65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -10,5 +10,6 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_framebuffer_test.o \
 	drm_kunit_helpers.o \
 	drm_mm_test.o \
+	drm_modes_test.o \
 	drm_plane_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_modes_test.c b/drivers/gpu/drm/tests/drm_modes_test.c
new file mode 100644
index 000000000000..b3940b4c6022
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_modes_test.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <drm/drm_drv.h>
+#include <drm/drm_modes.h>
+
+#include <kunit/test.h>
+
+#include <linux/units.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_test_modes_priv {
+	struct drm_device *drm;
+};
+
+static int drm_test_modes_init(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET, "drm-modes-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	test->priv = priv;
+
+	return 0;
+}
+
+static void drm_test_modes_analog_tv_ntsc_480i(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *mode;
+
+	mode = drm_analog_tv_mode(priv->drm,
+				  DRM_MODE_TV_MODE_NTSC,
+				  13500 * HZ_PER_KHZ, 720, 480,
+				  true);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 60);
+	KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+	/* BT.601 defines hsync_start at 736 for 480i */
+	KUNIT_EXPECT_EQ(test, mode->hsync_start, 736);
+
+	/*
+	 * The NTSC standard expects a line to take 63.556us. With a
+	 * pixel clock of 13.5 MHz, a pixel takes around 74ns, so we
+	 * need to have 63556ns / 74ns = 858.
+	 *
+	 * This is also mandated by BT.601.
+	 */
+	KUNIT_EXPECT_EQ(test, mode->htotal, 858);
+
+	KUNIT_EXPECT_EQ(test, mode->vdisplay, 480);
+	KUNIT_EXPECT_EQ(test, mode->vtotal, 525);
+}
+
+static void drm_test_modes_analog_tv_ntsc_480i_inlined(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *expected, *mode;
+
+	expected = drm_analog_tv_mode(priv->drm,
+				      DRM_MODE_TV_MODE_NTSC,
+				      13500 * HZ_PER_KHZ, 720, 480,
+				      true);
+	KUNIT_ASSERT_NOT_NULL(test, expected);
+
+	mode = drm_mode_analog_ntsc_480i(priv->drm);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static void drm_test_modes_analog_tv_pal_576i(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *mode;
+
+	mode = drm_analog_tv_mode(priv->drm,
+				  DRM_MODE_TV_MODE_PAL,
+				  13500 * HZ_PER_KHZ, 720, 576,
+				  true);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 50);
+	KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+	/* BT.601 defines hsync_start at 732 for 576i */
+	KUNIT_EXPECT_EQ(test, mode->hsync_start, 732);
+
+	/*
+	 * The PAL standard expects a line to take 64us. With a pixel
+	 * clock of 13.5 MHz, a pixel takes around 74ns, so we need to
+	 * have 64000ns / 74ns = 864.
+	 *
+	 * This is also mandated by BT.601.
+	 */
+	KUNIT_EXPECT_EQ(test, mode->htotal, 864);
+
+	KUNIT_EXPECT_EQ(test, mode->vdisplay, 576);
+	KUNIT_EXPECT_EQ(test, mode->vtotal, 625);
+}
+
+static void drm_test_modes_analog_tv_pal_576i_inlined(struct kunit *test)
+{
+	struct drm_test_modes_priv *priv = test->priv;
+	struct drm_display_mode *expected, *mode;
+
+	expected = drm_analog_tv_mode(priv->drm,
+				      DRM_MODE_TV_MODE_PAL,
+				      13500 * HZ_PER_KHZ, 720, 576,
+				      true);
+	KUNIT_ASSERT_NOT_NULL(test, expected);
+
+	mode = drm_mode_analog_pal_576i(priv->drm);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static struct kunit_case drm_modes_analog_tv_tests[] = {
+	KUNIT_CASE(drm_test_modes_analog_tv_ntsc_480i),
+	KUNIT_CASE(drm_test_modes_analog_tv_ntsc_480i_inlined),
+	KUNIT_CASE(drm_test_modes_analog_tv_pal_576i),
+	KUNIT_CASE(drm_test_modes_analog_tv_pal_576i_inlined),
+	{ }
+};
+
+static struct kunit_suite drm_modes_analog_tv_test_suite = {
+	.name = "drm_modes_analog_tv",
+	.init = drm_test_modes_init,
+	.test_cases = drm_modes_analog_tv_tests,
+};
+
+kunit_test_suite(drm_modes_analog_tv_test_suite);
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index b0c680e6f670..c613f0abe9dc 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -468,6 +468,23 @@ bool drm_mode_is_420_also(const struct drm_display_info *display,
 bool drm_mode_is_420(const struct drm_display_info *display,
 		     const struct drm_display_mode *mode);
 
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+					    enum drm_connector_tv_mode mode,
+					    unsigned long pixel_clock_hz,
+					    unsigned int hdisplay,
+					    unsigned int vdisplay,
+					    bool interlace);
+
+static inline struct drm_display_mode *drm_mode_analog_ntsc_480i(struct drm_device *dev)
+{
+	return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_NTSC, 13500000, 720, 480, true);
+}
+
+static inline struct drm_display_mode *drm_mode_analog_pal_576i(struct drm_device *dev)
+{
+	return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_PAL, 13500000, 720, 576, true);
+}
+
 struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
 				      int hdisplay, int vdisplay, int vrefresh,
 				      bool reduced, bool interlaced,

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 08/25] drm/client: Add some tests for drm_connector_pick_cmdline_mode()

[Maxime Ripard]

drm_connector_pick_cmdline_mode() is in charge of finding a proper
drm_display_mode from the definition we got in the video= command line
argument.

Let's add some unit tests to make sure we're not getting any regressions
there.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Rename tests to be consistent with DRM tests naming convention

Changes in v5:
- Removed useless (for now) count and modes intermediate variables in
  get_modes
- Switched to kunit assertions in test init, and to KUNIT_ASSERT_NOT_NULL
  instead of KUNIT_ASSERT_PTR_NE(..., NULL)

Changes in v4:
- Removed MODULE macros
---
 drivers/gpu/drm/drm_client_modeset.c            |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 100 ++++++++++++++++++++++++
 2 files changed, 104 insertions(+)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index bbc535cc50dd..d553e793e673 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -1237,3 +1237,7 @@ int drm_client_modeset_dpms(struct drm_client_dev *client, int mode)
 	return ret;
 }
 EXPORT_SYMBOL(drm_client_modeset_dpms);
+
+#ifdef CONFIG_DRM_KUNIT_TEST
+#include "tests/drm_client_modeset_test.c"
+#endif
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
new file mode 100644
index 000000000000..558c098b0384
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Maxime Ripard <mripard@kernel.org>
+ */
+
+#include <kunit/test.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_client_modeset_test_priv {
+	struct drm_device *drm;
+	struct drm_connector connector;
+};
+
+static int drm_client_modeset_connector_get_modes(struct drm_connector *connector)
+{
+	return drm_add_modes_noedid(connector, 1920, 1200);
+}
+
+static const struct drm_connector_helper_funcs drm_client_modeset_connector_helper_funcs = {
+	.get_modes = drm_client_modeset_connector_get_modes,
+};
+
+static const struct drm_connector_funcs drm_client_modeset_connector_funcs = {
+};
+
+static int drm_client_modeset_test_init(struct kunit *test)
+{
+	struct drm_client_modeset_test_priv *priv;
+	int ret;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	test->priv = priv;
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET, "drm-client-modeset-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	ret = drmm_connector_init(priv->drm, &priv->connector,
+				  &drm_client_modeset_connector_funcs,
+				  DRM_MODE_CONNECTOR_Unknown,
+				  NULL);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_connector_helper_add(&priv->connector, &drm_client_modeset_connector_helper_funcs);
+
+	return 0;
+
+}
+
+static void drm_test_pick_cmdline_res_1920_1080_60(struct kunit *test)
+{
+	struct drm_client_modeset_test_priv *priv = test->priv;
+	struct drm_device *drm = priv->drm;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+	struct drm_display_mode *expected_mode, *mode;
+	const char *cmdline = "1920x1080@60";
+	int ret;
+
+	expected_mode = drm_mode_find_dmt(priv->drm, 1920, 1080, 60, false);
+	KUNIT_ASSERT_NOT_NULL(test, expected_mode);
+
+	KUNIT_ASSERT_TRUE(test,
+			  drm_mode_parse_command_line_for_connector(cmdline,
+								    connector,
+								    cmdline_mode));
+
+	mutex_lock(&drm->mode_config.mutex);
+	ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+	mutex_unlock(&drm->mode_config.mutex);
+	KUNIT_ASSERT_GT(test, ret, 0);
+
+	mode = drm_connector_pick_cmdline_mode(connector);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
+}
+
+
+static struct kunit_case drm_test_pick_cmdline_tests[] = {
+	KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
+	{}
+};
+
+static struct kunit_suite drm_test_pick_cmdline_test_suite = {
+	.name = "drm_test_pick_cmdline",
+	.init = drm_client_modeset_test_init,
+	.test_cases = drm_test_pick_cmdline_tests
+};
+
+kunit_test_suite(drm_test_pick_cmdline_test_suite);

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 08/25] drm/client: Add some tests for drm_connector_pick_cmdline_mode()

[Maxime Ripard]

drm_connector_pick_cmdline_mode() is in charge of finding a proper
drm_display_mode from the definition we got in the video= command line
argument.

Let's add some unit tests to make sure we're not getting any regressions
there.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Rename tests to be consistent with DRM tests naming convention

Changes in v5:
- Removed useless (for now) count and modes intermediate variables in
  get_modes
- Switched to kunit assertions in test init, and to KUNIT_ASSERT_NOT_NULL
  instead of KUNIT_ASSERT_PTR_NE(..., NULL)

Changes in v4:
- Removed MODULE macros
---
 drivers/gpu/drm/drm_client_modeset.c            |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 100 ++++++++++++++++++++++++
 2 files changed, 104 insertions(+)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index bbc535cc50dd..d553e793e673 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -1237,3 +1237,7 @@ int drm_client_modeset_dpms(struct drm_client_dev *client, int mode)
 	return ret;
 }
 EXPORT_SYMBOL(drm_client_modeset_dpms);
+
+#ifdef CONFIG_DRM_KUNIT_TEST
+#include "tests/drm_client_modeset_test.c"
+#endif
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
new file mode 100644
index 000000000000..558c098b0384
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Maxime Ripard <mripard@kernel.org>
+ */
+
+#include <kunit/test.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_client_modeset_test_priv {
+	struct drm_device *drm;
+	struct drm_connector connector;
+};
+
+static int drm_client_modeset_connector_get_modes(struct drm_connector *connector)
+{
+	return drm_add_modes_noedid(connector, 1920, 1200);
+}
+
+static const struct drm_connector_helper_funcs drm_client_modeset_connector_helper_funcs = {
+	.get_modes = drm_client_modeset_connector_get_modes,
+};
+
+static const struct drm_connector_funcs drm_client_modeset_connector_funcs = {
+};
+
+static int drm_client_modeset_test_init(struct kunit *test)
+{
+	struct drm_client_modeset_test_priv *priv;
+	int ret;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	test->priv = priv;
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET, "drm-client-modeset-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	ret = drmm_connector_init(priv->drm, &priv->connector,
+				  &drm_client_modeset_connector_funcs,
+				  DRM_MODE_CONNECTOR_Unknown,
+				  NULL);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_connector_helper_add(&priv->connector, &drm_client_modeset_connector_helper_funcs);
+
+	return 0;
+
+}
+
+static void drm_test_pick_cmdline_res_1920_1080_60(struct kunit *test)
+{
+	struct drm_client_modeset_test_priv *priv = test->priv;
+	struct drm_device *drm = priv->drm;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+	struct drm_display_mode *expected_mode, *mode;
+	const char *cmdline = "1920x1080@60";
+	int ret;
+
+	expected_mode = drm_mode_find_dmt(priv->drm, 1920, 1080, 60, false);
+	KUNIT_ASSERT_NOT_NULL(test, expected_mode);
+
+	KUNIT_ASSERT_TRUE(test,
+			  drm_mode_parse_command_line_for_connector(cmdline,
+								    connector,
+								    cmdline_mode));
+
+	mutex_lock(&drm->mode_config.mutex);
+	ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+	mutex_unlock(&drm->mode_config.mutex);
+	KUNIT_ASSERT_GT(test, ret, 0);
+
+	mode = drm_connector_pick_cmdline_mode(connector);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
+}
+
+
+static struct kunit_case drm_test_pick_cmdline_tests[] = {
+	KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
+	{}
+};
+
+static struct kunit_suite drm_test_pick_cmdline_test_suite = {
+	.name = "drm_test_pick_cmdline",
+	.init = drm_client_modeset_test_init,
+	.test_cases = drm_test_pick_cmdline_tests
+};
+
+kunit_test_suite(drm_test_pick_cmdline_test_suite);

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 08/25] drm/client: Add some tests for drm_connector_pick_cmdline_mode()

[Maxime Ripard]

drm_connector_pick_cmdline_mode() is in charge of finding a proper
drm_display_mode from the definition we got in the video= command line
argument.

Let's add some unit tests to make sure we're not getting any regressions
there.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Rename tests to be consistent with DRM tests naming convention

Changes in v5:
- Removed useless (for now) count and modes intermediate variables in
  get_modes
- Switched to kunit assertions in test init, and to KUNIT_ASSERT_NOT_NULL
  instead of KUNIT_ASSERT_PTR_NE(..., NULL)

Changes in v4:
- Removed MODULE macros
---
 drivers/gpu/drm/drm_client_modeset.c            |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 100 ++++++++++++++++++++++++
 2 files changed, 104 insertions(+)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index bbc535cc50dd..d553e793e673 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -1237,3 +1237,7 @@ int drm_client_modeset_dpms(struct drm_client_dev *client, int mode)
 	return ret;
 }
 EXPORT_SYMBOL(drm_client_modeset_dpms);
+
+#ifdef CONFIG_DRM_KUNIT_TEST
+#include "tests/drm_client_modeset_test.c"
+#endif
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
new file mode 100644
index 000000000000..558c098b0384
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Maxime Ripard <mripard@kernel.org>
+ */
+
+#include <kunit/test.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_client_modeset_test_priv {
+	struct drm_device *drm;
+	struct drm_connector connector;
+};
+
+static int drm_client_modeset_connector_get_modes(struct drm_connector *connector)
+{
+	return drm_add_modes_noedid(connector, 1920, 1200);
+}
+
+static const struct drm_connector_helper_funcs drm_client_modeset_connector_helper_funcs = {
+	.get_modes = drm_client_modeset_connector_get_modes,
+};
+
+static const struct drm_connector_funcs drm_client_modeset_connector_funcs = {
+};
+
+static int drm_client_modeset_test_init(struct kunit *test)
+{
+	struct drm_client_modeset_test_priv *priv;
+	int ret;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	test->priv = priv;
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET, "drm-client-modeset-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	ret = drmm_connector_init(priv->drm, &priv->connector,
+				  &drm_client_modeset_connector_funcs,
+				  DRM_MODE_CONNECTOR_Unknown,
+				  NULL);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_connector_helper_add(&priv->connector, &drm_client_modeset_connector_helper_funcs);
+
+	return 0;
+
+}
+
+static void drm_test_pick_cmdline_res_1920_1080_60(struct kunit *test)
+{
+	struct drm_client_modeset_test_priv *priv = test->priv;
+	struct drm_device *drm = priv->drm;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+	struct drm_display_mode *expected_mode, *mode;
+	const char *cmdline = "1920x1080@60";
+	int ret;
+
+	expected_mode = drm_mode_find_dmt(priv->drm, 1920, 1080, 60, false);
+	KUNIT_ASSERT_NOT_NULL(test, expected_mode);
+
+	KUNIT_ASSERT_TRUE(test,
+			  drm_mode_parse_command_line_for_connector(cmdline,
+								    connector,
+								    cmdline_mode));
+
+	mutex_lock(&drm->mode_config.mutex);
+	ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+	mutex_unlock(&drm->mode_config.mutex);
+	KUNIT_ASSERT_GT(test, ret, 0);
+
+	mode = drm_connector_pick_cmdline_mode(connector);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
+}
+
+
+static struct kunit_case drm_test_pick_cmdline_tests[] = {
+	KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
+	{}
+};
+
+static struct kunit_suite drm_test_pick_cmdline_test_suite = {
+	.name = "drm_test_pick_cmdline",
+	.init = drm_client_modeset_test_init,
+	.test_cases = drm_test_pick_cmdline_tests
+};
+
+kunit_test_suite(drm_test_pick_cmdline_test_suite);

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 08/25] drm/client: Add some tests for drm_connector_pick_cmdline_mode()

[Maxime Ripard]

drm_connector_pick_cmdline_mode() is in charge of finding a proper
drm_display_mode from the definition we got in the video= command line
argument.

Let's add some unit tests to make sure we're not getting any regressions
there.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Rename tests to be consistent with DRM tests naming convention

Changes in v5:
- Removed useless (for now) count and modes intermediate variables in
  get_modes
- Switched to kunit assertions in test init, and to KUNIT_ASSERT_NOT_NULL
  instead of KUNIT_ASSERT_PTR_NE(..., NULL)

Changes in v4:
- Removed MODULE macros
---
 drivers/gpu/drm/drm_client_modeset.c            |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 100 ++++++++++++++++++++++++
 2 files changed, 104 insertions(+)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index bbc535cc50dd..d553e793e673 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -1237,3 +1237,7 @@ int drm_client_modeset_dpms(struct drm_client_dev *client, int mode)
 	return ret;
 }
 EXPORT_SYMBOL(drm_client_modeset_dpms);
+
+#ifdef CONFIG_DRM_KUNIT_TEST
+#include "tests/drm_client_modeset_test.c"
+#endif
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
new file mode 100644
index 000000000000..558c098b0384
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Maxime Ripard <mripard@kernel.org>
+ */
+
+#include <kunit/test.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_client_modeset_test_priv {
+	struct drm_device *drm;
+	struct drm_connector connector;
+};
+
+static int drm_client_modeset_connector_get_modes(struct drm_connector *connector)
+{
+	return drm_add_modes_noedid(connector, 1920, 1200);
+}
+
+static const struct drm_connector_helper_funcs drm_client_modeset_connector_helper_funcs = {
+	.get_modes = drm_client_modeset_connector_get_modes,
+};
+
+static const struct drm_connector_funcs drm_client_modeset_connector_funcs = {
+};
+
+static int drm_client_modeset_test_init(struct kunit *test)
+{
+	struct drm_client_modeset_test_priv *priv;
+	int ret;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	test->priv = priv;
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET, "drm-client-modeset-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	ret = drmm_connector_init(priv->drm, &priv->connector,
+				  &drm_client_modeset_connector_funcs,
+				  DRM_MODE_CONNECTOR_Unknown,
+				  NULL);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_connector_helper_add(&priv->connector, &drm_client_modeset_connector_helper_funcs);
+
+	return 0;
+
+}
+
+static void drm_test_pick_cmdline_res_1920_1080_60(struct kunit *test)
+{
+	struct drm_client_modeset_test_priv *priv = test->priv;
+	struct drm_device *drm = priv->drm;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+	struct drm_display_mode *expected_mode, *mode;
+	const char *cmdline = "1920x1080@60";
+	int ret;
+
+	expected_mode = drm_mode_find_dmt(priv->drm, 1920, 1080, 60, false);
+	KUNIT_ASSERT_NOT_NULL(test, expected_mode);
+
+	KUNIT_ASSERT_TRUE(test,
+			  drm_mode_parse_command_line_for_connector(cmdline,
+								    connector,
+								    cmdline_mode));
+
+	mutex_lock(&drm->mode_config.mutex);
+	ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+	mutex_unlock(&drm->mode_config.mutex);
+	KUNIT_ASSERT_GT(test, ret, 0);
+
+	mode = drm_connector_pick_cmdline_mode(connector);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
+}
+
+
+static struct kunit_case drm_test_pick_cmdline_tests[] = {
+	KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
+	{}
+};
+
+static struct kunit_suite drm_test_pick_cmdline_test_suite = {
+	.name = "drm_test_pick_cmdline",
+	.init = drm_client_modeset_test_init,
+	.test_cases = drm_test_pick_cmdline_tests
+};
+
+kunit_test_suite(drm_test_pick_cmdline_test_suite);

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 08/25] drm/client: Add some tests for drm_connector_pick_cmdline_mode()

[Maxime Ripard]

drm_connector_pick_cmdline_mode() is in charge of finding a proper
drm_display_mode from the definition we got in the video= command line
argument.

Let's add some unit tests to make sure we're not getting any regressions
there.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Rename tests to be consistent with DRM tests naming convention

Changes in v5:
- Removed useless (for now) count and modes intermediate variables in
  get_modes
- Switched to kunit assertions in test init, and to KUNIT_ASSERT_NOT_NULL
  instead of KUNIT_ASSERT_PTR_NE(..., NULL)

Changes in v4:
- Removed MODULE macros
---
 drivers/gpu/drm/drm_client_modeset.c            |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 100 ++++++++++++++++++++++++
 2 files changed, 104 insertions(+)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index bbc535cc50dd..d553e793e673 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -1237,3 +1237,7 @@ int drm_client_modeset_dpms(struct drm_client_dev *client, int mode)
 	return ret;
 }
 EXPORT_SYMBOL(drm_client_modeset_dpms);
+
+#ifdef CONFIG_DRM_KUNIT_TEST
+#include "tests/drm_client_modeset_test.c"
+#endif
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
new file mode 100644
index 000000000000..558c098b0384
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Maxime Ripard <mripard@kernel.org>
+ */
+
+#include <kunit/test.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_client_modeset_test_priv {
+	struct drm_device *drm;
+	struct drm_connector connector;
+};
+
+static int drm_client_modeset_connector_get_modes(struct drm_connector *connector)
+{
+	return drm_add_modes_noedid(connector, 1920, 1200);
+}
+
+static const struct drm_connector_helper_funcs drm_client_modeset_connector_helper_funcs = {
+	.get_modes = drm_client_modeset_connector_get_modes,
+};
+
+static const struct drm_connector_funcs drm_client_modeset_connector_funcs = {
+};
+
+static int drm_client_modeset_test_init(struct kunit *test)
+{
+	struct drm_client_modeset_test_priv *priv;
+	int ret;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	test->priv = priv;
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET, "drm-client-modeset-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	ret = drmm_connector_init(priv->drm, &priv->connector,
+				  &drm_client_modeset_connector_funcs,
+				  DRM_MODE_CONNECTOR_Unknown,
+				  NULL);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_connector_helper_add(&priv->connector, &drm_client_modeset_connector_helper_funcs);
+
+	return 0;
+
+}
+
+static void drm_test_pick_cmdline_res_1920_1080_60(struct kunit *test)
+{
+	struct drm_client_modeset_test_priv *priv = test->priv;
+	struct drm_device *drm = priv->drm;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+	struct drm_display_mode *expected_mode, *mode;
+	const char *cmdline = "1920x1080@60";
+	int ret;
+
+	expected_mode = drm_mode_find_dmt(priv->drm, 1920, 1080, 60, false);
+	KUNIT_ASSERT_NOT_NULL(test, expected_mode);
+
+	KUNIT_ASSERT_TRUE(test,
+			  drm_mode_parse_command_line_for_connector(cmdline,
+								    connector,
+								    cmdline_mode));
+
+	mutex_lock(&drm->mode_config.mutex);
+	ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+	mutex_unlock(&drm->mode_config.mutex);
+	KUNIT_ASSERT_GT(test, ret, 0);
+
+	mode = drm_connector_pick_cmdline_mode(connector);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
+}
+
+
+static struct kunit_case drm_test_pick_cmdline_tests[] = {
+	KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
+	{}
+};
+
+static struct kunit_suite drm_test_pick_cmdline_test_suite = {
+	.name = "drm_test_pick_cmdline",
+	.init = drm_client_modeset_test_init,
+	.test_cases = drm_test_pick_cmdline_tests
+};
+
+kunit_test_suite(drm_test_pick_cmdline_test_suite);

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

The current construction of the named mode parsing doesn't allow to extend
it easily. Let's move it to a separate function so we can add more
parameters and modes.

In order for the tests to still pass, some extra checks are needed, so
it's not a 1:1 move.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by

Changes in v6:
- Simplify the test for connection status extras
- Simplify the code path to call drm_mode_parse_cmdline_named_mode

Changes in v4:
- Fold down all the named mode patches that were split into a single
  patch again to maintain bisectability
---
 drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
 1 file changed, 58 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 71c050c3ee6b..37542612912b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
 	"PAL",
 };
 
+static int drm_mode_parse_cmdline_named_mode(const char *name,
+					     unsigned int name_end,
+					     struct drm_cmdline_mode *cmdline_mode)
+{
+	unsigned int i;
+
+	if (!name_end)
+		return 0;
+
+	/* If the name starts with a digit, it's not a named mode */
+	if (isdigit(name[0]))
+		return 0;
+
+	/*
+	 * If there's an equal sign in the name, the command-line
+	 * contains only an option and no mode.
+	 */
+	if (strnchr(name, name_end, '='))
+		return 0;
+
+	/* The connection status extras can be set without a mode. */
+	if (name_end == 1 &&
+	    (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
+		return 0;
+
+	/*
+	 * We're sure we're a named mode at this point, iterate over the
+	 * list of modes we're aware of.
+	 */
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+		int ret;
+
+		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+		if (ret != name_end)
+			continue;
+
+		strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+		cmdline_mode->specified = true;
+
+		return 1;
+	}
+
+	return -EINVAL;
+}
+
 /**
  * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
  * @mode_option: optional per connector mode option
@@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 	const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
 	const char *options_ptr = NULL;
 	char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
-	int i, len, ret;
+	int len, ret;
 
 	memset(mode, 0, sizeof(*mode));
 	mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
@@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		parse_extras = true;
 	}
 
-	/* First check for a named mode */
-	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
-		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
-		if (ret == mode_end) {
-			if (refresh_ptr)
-				return false; /* named + refresh is invalid */
+	if (!mode_end)
+		return false;
 
-			strcpy(mode->name, drm_named_modes_whitelist[i]);
-			mode->specified = true;
-			break;
-		}
-	}
+	ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode);
+	if (ret < 0)
+		return false;
+
+	/*
+	 * Having a mode that starts by a letter (and thus is named) and
+	 * an at-sign (used to specify a refresh rate) is disallowed.
+	 */
+	if (ret && refresh_ptr)
+		return false;
 
 	/* No named mode? Check for a normal mode argument, e.g. 1024x768 */
 	if (!mode->specified && isdigit(name[0])) {

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

The current construction of the named mode parsing doesn't allow to extend
it easily. Let's move it to a separate function so we can add more
parameters and modes.

In order for the tests to still pass, some extra checks are needed, so
it's not a 1:1 move.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by

Changes in v6:
- Simplify the test for connection status extras
- Simplify the code path to call drm_mode_parse_cmdline_named_mode

Changes in v4:
- Fold down all the named mode patches that were split into a single
  patch again to maintain bisectability
---
 drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
 1 file changed, 58 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 71c050c3ee6b..37542612912b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
 	"PAL",
 };
 
+static int drm_mode_parse_cmdline_named_mode(const char *name,
+					     unsigned int name_end,
+					     struct drm_cmdline_mode *cmdline_mode)
+{
+	unsigned int i;
+
+	if (!name_end)
+		return 0;
+
+	/* If the name starts with a digit, it's not a named mode */
+	if (isdigit(name[0]))
+		return 0;
+
+	/*
+	 * If there's an equal sign in the name, the command-line
+	 * contains only an option and no mode.
+	 */
+	if (strnchr(name, name_end, '='))
+		return 0;
+
+	/* The connection status extras can be set without a mode. */
+	if (name_end == 1 &&
+	    (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
+		return 0;
+
+	/*
+	 * We're sure we're a named mode at this point, iterate over the
+	 * list of modes we're aware of.
+	 */
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+		int ret;
+
+		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+		if (ret != name_end)
+			continue;
+
+		strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+		cmdline_mode->specified = true;
+
+		return 1;
+	}
+
+	return -EINVAL;
+}
+
 /**
  * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
  * @mode_option: optional per connector mode option
@@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 	const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
 	const char *options_ptr = NULL;
 	char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
-	int i, len, ret;
+	int len, ret;
 
 	memset(mode, 0, sizeof(*mode));
 	mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
@@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		parse_extras = true;
 	}
 
-	/* First check for a named mode */
-	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
-		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
-		if (ret == mode_end) {
-			if (refresh_ptr)
-				return false; /* named + refresh is invalid */
+	if (!mode_end)
+		return false;
 
-			strcpy(mode->name, drm_named_modes_whitelist[i]);
-			mode->specified = true;
-			break;
-		}
-	}
+	ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode);
+	if (ret < 0)
+		return false;
+
+	/*
+	 * Having a mode that starts by a letter (and thus is named) and
+	 * an at-sign (used to specify a refresh rate) is disallowed.
+	 */
+	if (ret && refresh_ptr)
+		return false;
 
 	/* No named mode? Check for a normal mode argument, e.g. 1024x768 */
 	if (!mode->specified && isdigit(name[0])) {

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

The current construction of the named mode parsing doesn't allow to extend
it easily. Let's move it to a separate function so we can add more
parameters and modes.

In order for the tests to still pass, some extra checks are needed, so
it's not a 1:1 move.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by

Changes in v6:
- Simplify the test for connection status extras
- Simplify the code path to call drm_mode_parse_cmdline_named_mode

Changes in v4:
- Fold down all the named mode patches that were split into a single
  patch again to maintain bisectability
---
 drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
 1 file changed, 58 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 71c050c3ee6b..37542612912b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
 	"PAL",
 };
 
+static int drm_mode_parse_cmdline_named_mode(const char *name,
+					     unsigned int name_end,
+					     struct drm_cmdline_mode *cmdline_mode)
+{
+	unsigned int i;
+
+	if (!name_end)
+		return 0;
+
+	/* If the name starts with a digit, it's not a named mode */
+	if (isdigit(name[0]))
+		return 0;
+
+	/*
+	 * If there's an equal sign in the name, the command-line
+	 * contains only an option and no mode.
+	 */
+	if (strnchr(name, name_end, '='))
+		return 0;
+
+	/* The connection status extras can be set without a mode. */
+	if (name_end == 1 &&
+	    (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
+		return 0;
+
+	/*
+	 * We're sure we're a named mode at this point, iterate over the
+	 * list of modes we're aware of.
+	 */
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+		int ret;
+
+		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+		if (ret != name_end)
+			continue;
+
+		strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+		cmdline_mode->specified = true;
+
+		return 1;
+	}
+
+	return -EINVAL;
+}
+
 /**
  * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
  * @mode_option: optional per connector mode option
@@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 	const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
 	const char *options_ptr = NULL;
 	char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
-	int i, len, ret;
+	int len, ret;
 
 	memset(mode, 0, sizeof(*mode));
 	mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
@@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		parse_extras = true;
 	}
 
-	/* First check for a named mode */
-	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
-		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
-		if (ret == mode_end) {
-			if (refresh_ptr)
-				return false; /* named + refresh is invalid */
+	if (!mode_end)
+		return false;
 
-			strcpy(mode->name, drm_named_modes_whitelist[i]);
-			mode->specified = true;
-			break;
-		}
-	}
+	ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode);
+	if (ret < 0)
+		return false;
+
+	/*
+	 * Having a mode that starts by a letter (and thus is named) and
+	 * an at-sign (used to specify a refresh rate) is disallowed.
+	 */
+	if (ret && refresh_ptr)
+		return false;
 
 	/* No named mode? Check for a normal mode argument, e.g. 1024x768 */
 	if (!mode->specified && isdigit(name[0])) {

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

The current construction of the named mode parsing doesn't allow to extend
it easily. Let's move it to a separate function so we can add more
parameters and modes.

In order for the tests to still pass, some extra checks are needed, so
it's not a 1:1 move.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by

Changes in v6:
- Simplify the test for connection status extras
- Simplify the code path to call drm_mode_parse_cmdline_named_mode

Changes in v4:
- Fold down all the named mode patches that were split into a single
  patch again to maintain bisectability
---
 drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
 1 file changed, 58 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 71c050c3ee6b..37542612912b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
 	"PAL",
 };
 
+static int drm_mode_parse_cmdline_named_mode(const char *name,
+					     unsigned int name_end,
+					     struct drm_cmdline_mode *cmdline_mode)
+{
+	unsigned int i;
+
+	if (!name_end)
+		return 0;
+
+	/* If the name starts with a digit, it's not a named mode */
+	if (isdigit(name[0]))
+		return 0;
+
+	/*
+	 * If there's an equal sign in the name, the command-line
+	 * contains only an option and no mode.
+	 */
+	if (strnchr(name, name_end, '='))
+		return 0;
+
+	/* The connection status extras can be set without a mode. */
+	if (name_end == 1 &&
+	    (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
+		return 0;
+
+	/*
+	 * We're sure we're a named mode at this point, iterate over the
+	 * list of modes we're aware of.
+	 */
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+		int ret;
+
+		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+		if (ret != name_end)
+			continue;
+
+		strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+		cmdline_mode->specified = true;
+
+		return 1;
+	}
+
+	return -EINVAL;
+}
+
 /**
  * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
  * @mode_option: optional per connector mode option
@@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 	const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
 	const char *options_ptr = NULL;
 	char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
-	int i, len, ret;
+	int len, ret;
 
 	memset(mode, 0, sizeof(*mode));
 	mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
@@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		parse_extras = true;
 	}
 
-	/* First check for a named mode */
-	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
-		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
-		if (ret == mode_end) {
-			if (refresh_ptr)
-				return false; /* named + refresh is invalid */
+	if (!mode_end)
+		return false;
 
-			strcpy(mode->name, drm_named_modes_whitelist[i]);
-			mode->specified = true;
-			break;
-		}
-	}
+	ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode);
+	if (ret < 0)
+		return false;
+
+	/*
+	 * Having a mode that starts by a letter (and thus is named) and
+	 * an at-sign (used to specify a refresh rate) is disallowed.
+	 */
+	if (ret && refresh_ptr)
+		return false;
 
 	/* No named mode? Check for a normal mode argument, e.g. 1024x768 */
 	if (!mode->specified && isdigit(name[0])) {

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

The current construction of the named mode parsing doesn't allow to extend
it easily. Let's move it to a separate function so we can add more
parameters and modes.

In order for the tests to still pass, some extra checks are needed, so
it's not a 1:1 move.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by

Changes in v6:
- Simplify the test for connection status extras
- Simplify the code path to call drm_mode_parse_cmdline_named_mode

Changes in v4:
- Fold down all the named mode patches that were split into a single
  patch again to maintain bisectability
---
 drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
 1 file changed, 58 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 71c050c3ee6b..37542612912b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
 	"PAL",
 };
 
+static int drm_mode_parse_cmdline_named_mode(const char *name,
+					     unsigned int name_end,
+					     struct drm_cmdline_mode *cmdline_mode)
+{
+	unsigned int i;
+
+	if (!name_end)
+		return 0;
+
+	/* If the name starts with a digit, it's not a named mode */
+	if (isdigit(name[0]))
+		return 0;
+
+	/*
+	 * If there's an equal sign in the name, the command-line
+	 * contains only an option and no mode.
+	 */
+	if (strnchr(name, name_end, '='))
+		return 0;
+
+	/* The connection status extras can be set without a mode. */
+	if (name_end == 1 &&
+	    (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
+		return 0;
+
+	/*
+	 * We're sure we're a named mode at this point, iterate over the
+	 * list of modes we're aware of.
+	 */
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+		int ret;
+
+		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+		if (ret != name_end)
+			continue;
+
+		strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+		cmdline_mode->specified = true;
+
+		return 1;
+	}
+
+	return -EINVAL;
+}
+
 /**
  * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
  * @mode_option: optional per connector mode option
@@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 	const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
 	const char *options_ptr = NULL;
 	char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
-	int i, len, ret;
+	int len, ret;
 
 	memset(mode, 0, sizeof(*mode));
 	mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
@@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		parse_extras = true;
 	}
 
-	/* First check for a named mode */
-	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
-		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
-		if (ret == mode_end) {
-			if (refresh_ptr)
-				return false; /* named + refresh is invalid */
+	if (!mode_end)
+		return false;
 
-			strcpy(mode->name, drm_named_modes_whitelist[i]);
-			mode->specified = true;
-			break;
-		}
-	}
+	ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode);
+	if (ret < 0)
+		return false;
+
+	/*
+	 * Having a mode that starts by a letter (and thus is named) and
+	 * an at-sign (used to specify a refresh rate) is disallowed.
+	 */
+	if (ret && refresh_ptr)
+		return false;
 
 	/* No named mode? Check for a normal mode argument, e.g. 1024x768 */
 	if (!mode->specified && isdigit(name[0])) {

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 10/25] drm/modes: Switch to named mode descriptors

[Maxime Ripard]

The current named mode parsing relies only on the mode name, and doesn't
allow to specify any other parameter.

Let's convert that string list to an array of a custom structure that will
hold the name and some additional parameters in the future.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Fix typo in the commit log
- Add Noralf Reviewed-by
---
 drivers/gpu/drm/drm_modes.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 37542612912b..7594b657f86a 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2224,9 +2224,13 @@ static int drm_mode_parse_cmdline_options(const char *str,
 	return 0;
 }
 
-static const char * const drm_named_modes_whitelist[] = {
-	"NTSC",
-	"PAL",
+struct drm_named_mode {
+	const char *name;
+};
+
+static const struct drm_named_mode drm_named_modes[] = {
+	{ "NTSC", },
+	{ "PAL", },
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2258,14 +2262,15 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 	 * We're sure we're a named mode at this point, iterate over the
 	 * list of modes we're aware of.
 	 */
-	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+		const struct drm_named_mode *mode = &drm_named_modes[i];
 		int ret;
 
-		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+		ret = str_has_prefix(name, mode->name);
 		if (ret != name_end)
 			continue;
 
-		strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+		strcpy(cmdline_mode->name, mode->name);
 		cmdline_mode->specified = true;
 
 		return 1;

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 10/25] drm/modes: Switch to named mode descriptors

[Maxime Ripard]

The current named mode parsing relies only on the mode name, and doesn't
allow to specify any other parameter.

Let's convert that string list to an array of a custom structure that will
hold the name and some additional parameters in the future.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Fix typo in the commit log
- Add Noralf Reviewed-by
---
 drivers/gpu/drm/drm_modes.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 37542612912b..7594b657f86a 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2224,9 +2224,13 @@ static int drm_mode_parse_cmdline_options(const char *str,
 	return 0;
 }
 
-static const char * const drm_named_modes_whitelist[] = {
-	"NTSC",
-	"PAL",
+struct drm_named_mode {
+	const char *name;
+};
+
+static const struct drm_named_mode drm_named_modes[] = {
+	{ "NTSC", },
+	{ "PAL", },
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2258,14 +2262,15 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 	 * We're sure we're a named mode at this point, iterate over the
 	 * list of modes we're aware of.
 	 */
-	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+		const struct drm_named_mode *mode = &drm_named_modes[i];
 		int ret;
 
-		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+		ret = str_has_prefix(name, mode->name);
 		if (ret != name_end)
 			continue;
 
-		strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+		strcpy(cmdline_mode->name, mode->name);
 		cmdline_mode->specified = true;
 
 		return 1;

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 10/25] drm/modes: Switch to named mode descriptors

[Maxime Ripard]

The current named mode parsing relies only on the mode name, and doesn't
allow to specify any other parameter.

Let's convert that string list to an array of a custom structure that will
hold the name and some additional parameters in the future.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Fix typo in the commit log
- Add Noralf Reviewed-by
---
 drivers/gpu/drm/drm_modes.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 37542612912b..7594b657f86a 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2224,9 +2224,13 @@ static int drm_mode_parse_cmdline_options(const char *str,
 	return 0;
 }
 
-static const char * const drm_named_modes_whitelist[] = {
-	"NTSC",
-	"PAL",
+struct drm_named_mode {
+	const char *name;
+};
+
+static const struct drm_named_mode drm_named_modes[] = {
+	{ "NTSC", },
+	{ "PAL", },
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2258,14 +2262,15 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 	 * We're sure we're a named mode at this point, iterate over the
 	 * list of modes we're aware of.
 	 */
-	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+		const struct drm_named_mode *mode = &drm_named_modes[i];
 		int ret;
 
-		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+		ret = str_has_prefix(name, mode->name);
 		if (ret != name_end)
 			continue;
 
-		strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+		strcpy(cmdline_mode->name, mode->name);
 		cmdline_mode->specified = true;
 
 		return 1;

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 10/25] drm/modes: Switch to named mode descriptors

[Maxime Ripard]

The current named mode parsing relies only on the mode name, and doesn't
allow to specify any other parameter.

Let's convert that string list to an array of a custom structure that will
hold the name and some additional parameters in the future.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Fix typo in the commit log
- Add Noralf Reviewed-by
---
 drivers/gpu/drm/drm_modes.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 37542612912b..7594b657f86a 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2224,9 +2224,13 @@ static int drm_mode_parse_cmdline_options(const char *str,
 	return 0;
 }
 
-static const char * const drm_named_modes_whitelist[] = {
-	"NTSC",
-	"PAL",
+struct drm_named_mode {
+	const char *name;
+};
+
+static const struct drm_named_mode drm_named_modes[] = {
+	{ "NTSC", },
+	{ "PAL", },
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2258,14 +2262,15 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 	 * We're sure we're a named mode at this point, iterate over the
 	 * list of modes we're aware of.
 	 */
-	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+		const struct drm_named_mode *mode = &drm_named_modes[i];
 		int ret;
 
-		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+		ret = str_has_prefix(name, mode->name);
 		if (ret != name_end)
 			continue;
 
-		strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+		strcpy(cmdline_mode->name, mode->name);
 		cmdline_mode->specified = true;
 
 		return 1;

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 10/25] drm/modes: Switch to named mode descriptors

[Maxime Ripard]

The current named mode parsing relies only on the mode name, and doesn't
allow to specify any other parameter.

Let's convert that string list to an array of a custom structure that will
hold the name and some additional parameters in the future.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Fix typo in the commit log
- Add Noralf Reviewed-by
---
 drivers/gpu/drm/drm_modes.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 37542612912b..7594b657f86a 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2224,9 +2224,13 @@ static int drm_mode_parse_cmdline_options(const char *str,
 	return 0;
 }
 
-static const char * const drm_named_modes_whitelist[] = {
-	"NTSC",
-	"PAL",
+struct drm_named_mode {
+	const char *name;
+};
+
+static const struct drm_named_mode drm_named_modes[] = {
+	{ "NTSC", },
+	{ "PAL", },
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2258,14 +2262,15 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 	 * We're sure we're a named mode at this point, iterate over the
 	 * list of modes we're aware of.
 	 */
-	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+		const struct drm_named_mode *mode = &drm_named_modes[i];
 		int ret;
 
-		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+		ret = str_has_prefix(name, mode->name);
 		if (ret != name_end)
 			continue;
 
-		strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+		strcpy(cmdline_mode->name, mode->name);
 		cmdline_mode->specified = true;
 
 		return 1;

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 11/25] drm/modes: Fill drm_cmdline mode from named modes

[Maxime Ripard]

The current code to deal with named modes will only set the mode name, and
then it's up to drivers to try to match that name to whatever mode or
configuration they see fit.

The plan is to remove that need and move the named mode handling out of
drivers and into the core, and only rely on modes and properties. Let's
start by properly filling drm_cmdline_mode from a named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by:w
---
 drivers/gpu/drm/drm_modes.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 7594b657f86a..acee23e1a8b7 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,11 +2226,22 @@ static int drm_mode_parse_cmdline_options(const char *str,
 
 struct drm_named_mode {
 	const char *name;
+	unsigned int xres;
+	unsigned int yres;
+	unsigned int flags;
 };
 
+#define NAMED_MODE(_name, _x, _y, _flags)		\
+	{						\
+		.name = _name,				\
+		.xres = _x,				\
+		.yres = _y,				\
+		.flags = _flags,			\
+	}
+
 static const struct drm_named_mode drm_named_modes[] = {
-	{ "NTSC", },
-	{ "PAL", },
+	NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2271,6 +2282,9 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 			continue;
 
 		strcpy(cmdline_mode->name, mode->name);
+		cmdline_mode->xres = mode->xres;
+		cmdline_mode->yres = mode->yres;
+		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
 		cmdline_mode->specified = true;
 
 		return 1;

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 11/25] drm/modes: Fill drm_cmdline mode from named modes

[Maxime Ripard]

The current code to deal with named modes will only set the mode name, and
then it's up to drivers to try to match that name to whatever mode or
configuration they see fit.

The plan is to remove that need and move the named mode handling out of
drivers and into the core, and only rely on modes and properties. Let's
start by properly filling drm_cmdline_mode from a named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by:w
---
 drivers/gpu/drm/drm_modes.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 7594b657f86a..acee23e1a8b7 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,11 +2226,22 @@ static int drm_mode_parse_cmdline_options(const char *str,
 
 struct drm_named_mode {
 	const char *name;
+	unsigned int xres;
+	unsigned int yres;
+	unsigned int flags;
 };
 
+#define NAMED_MODE(_name, _x, _y, _flags)		\
+	{						\
+		.name = _name,				\
+		.xres = _x,				\
+		.yres = _y,				\
+		.flags = _flags,			\
+	}
+
 static const struct drm_named_mode drm_named_modes[] = {
-	{ "NTSC", },
-	{ "PAL", },
+	NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2271,6 +2282,9 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 			continue;
 
 		strcpy(cmdline_mode->name, mode->name);
+		cmdline_mode->xres = mode->xres;
+		cmdline_mode->yres = mode->yres;
+		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
 		cmdline_mode->specified = true;
 
 		return 1;

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 11/25] drm/modes: Fill drm_cmdline mode from named modes

[Maxime Ripard]

The current code to deal with named modes will only set the mode name, and
then it's up to drivers to try to match that name to whatever mode or
configuration they see fit.

The plan is to remove that need and move the named mode handling out of
drivers and into the core, and only rely on modes and properties. Let's
start by properly filling drm_cmdline_mode from a named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by:w
---
 drivers/gpu/drm/drm_modes.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 7594b657f86a..acee23e1a8b7 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,11 +2226,22 @@ static int drm_mode_parse_cmdline_options(const char *str,
 
 struct drm_named_mode {
 	const char *name;
+	unsigned int xres;
+	unsigned int yres;
+	unsigned int flags;
 };
 
+#define NAMED_MODE(_name, _x, _y, _flags)		\
+	{						\
+		.name = _name,				\
+		.xres = _x,				\
+		.yres = _y,				\
+		.flags = _flags,			\
+	}
+
 static const struct drm_named_mode drm_named_modes[] = {
-	{ "NTSC", },
-	{ "PAL", },
+	NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2271,6 +2282,9 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 			continue;
 
 		strcpy(cmdline_mode->name, mode->name);
+		cmdline_mode->xres = mode->xres;
+		cmdline_mode->yres = mode->yres;
+		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
 		cmdline_mode->specified = true;
 
 		return 1;

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 11/25] drm/modes: Fill drm_cmdline mode from named modes

[Maxime Ripard]

The current code to deal with named modes will only set the mode name, and
then it's up to drivers to try to match that name to whatever mode or
configuration they see fit.

The plan is to remove that need and move the named mode handling out of
drivers and into the core, and only rely on modes and properties. Let's
start by properly filling drm_cmdline_mode from a named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by:w
---
 drivers/gpu/drm/drm_modes.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 7594b657f86a..acee23e1a8b7 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,11 +2226,22 @@ static int drm_mode_parse_cmdline_options(const char *str,
 
 struct drm_named_mode {
 	const char *name;
+	unsigned int xres;
+	unsigned int yres;
+	unsigned int flags;
 };
 
+#define NAMED_MODE(_name, _x, _y, _flags)		\
+	{						\
+		.name = _name,				\
+		.xres = _x,				\
+		.yres = _y,				\
+		.flags = _flags,			\
+	}
+
 static const struct drm_named_mode drm_named_modes[] = {
-	{ "NTSC", },
-	{ "PAL", },
+	NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2271,6 +2282,9 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 			continue;
 
 		strcpy(cmdline_mode->name, mode->name);
+		cmdline_mode->xres = mode->xres;
+		cmdline_mode->yres = mode->yres;
+		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
 		cmdline_mode->specified = true;
 
 		return 1;

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 11/25] drm/modes: Fill drm_cmdline mode from named modes

[Maxime Ripard]

The current code to deal with named modes will only set the mode name, and
then it's up to drivers to try to match that name to whatever mode or
configuration they see fit.

The plan is to remove that need and move the named mode handling out of
drivers and into the core, and only rely on modes and properties. Let's
start by properly filling drm_cmdline_mode from a named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by:w
---
 drivers/gpu/drm/drm_modes.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 7594b657f86a..acee23e1a8b7 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,11 +2226,22 @@ static int drm_mode_parse_cmdline_options(const char *str,
 
 struct drm_named_mode {
 	const char *name;
+	unsigned int xres;
+	unsigned int yres;
+	unsigned int flags;
 };
 
+#define NAMED_MODE(_name, _x, _y, _flags)		\
+	{						\
+		.name = _name,				\
+		.xres = _x,				\
+		.yres = _y,				\
+		.flags = _flags,			\
+	}
+
 static const struct drm_named_mode drm_named_modes[] = {
-	{ "NTSC", },
-	{ "PAL", },
+	NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2271,6 +2282,9 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 			continue;
 
 		strcpy(cmdline_mode->name, mode->name);
+		cmdline_mode->xres = mode->xres;
+		cmdline_mode->yres = mode->yres;
+		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
 		cmdline_mode->specified = true;
 
 		return 1;

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 12/25] drm/connector: Add pixel clock to cmdline mode

[Maxime Ripard]

We'll need to get the pixel clock to generate proper display modes for
all the current named modes. Let's add it to struct drm_cmdline_mode and
fill it when parsing the named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by:w
---
 drivers/gpu/drm/drm_modes.c | 9 ++++++---
 include/drm/drm_connector.h | 7 +++++++
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index acee23e1a8b7..c826f9583a1d 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,22 +2226,24 @@ static int drm_mode_parse_cmdline_options(const char *str,
 
 struct drm_named_mode {
 	const char *name;
+	unsigned int pixel_clock_khz;
 	unsigned int xres;
 	unsigned int yres;
 	unsigned int flags;
 };
 
-#define NAMED_MODE(_name, _x, _y, _flags)		\
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags)	\
 	{						\
 		.name = _name,				\
+		.pixel_clock_khz = _pclk,		\
 		.xres = _x,				\
 		.yres = _y,				\
 		.flags = _flags,			\
 	}
 
 static const struct drm_named_mode drm_named_modes[] = {
-	NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
-	NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2282,6 +2284,7 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 			continue;
 
 		strcpy(cmdline_mode->name, mode->name);
+		cmdline_mode->pixel_clock = mode->pixel_clock_khz;
 		cmdline_mode->xres = mode->xres;
 		cmdline_mode->yres = mode->yres;
 		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 9afc7956fdc6..4927dcb2573f 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1273,6 +1273,13 @@ struct drm_cmdline_mode {
 	 */
 	bool bpp_specified;
 
+	/**
+	 * @pixel_clock:
+	 *
+	 * Pixel Clock in kHz. Optional.
+	 */
+	unsigned int pixel_clock;
+
 	/**
 	 * @xres:
 	 *

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 12/25] drm/connector: Add pixel clock to cmdline mode

[Maxime Ripard]

We'll need to get the pixel clock to generate proper display modes for
all the current named modes. Let's add it to struct drm_cmdline_mode and
fill it when parsing the named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by:w
---
 drivers/gpu/drm/drm_modes.c | 9 ++++++---
 include/drm/drm_connector.h | 7 +++++++
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index acee23e1a8b7..c826f9583a1d 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,22 +2226,24 @@ static int drm_mode_parse_cmdline_options(const char *str,
 
 struct drm_named_mode {
 	const char *name;
+	unsigned int pixel_clock_khz;
 	unsigned int xres;
 	unsigned int yres;
 	unsigned int flags;
 };
 
-#define NAMED_MODE(_name, _x, _y, _flags)		\
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags)	\
 	{						\
 		.name = _name,				\
+		.pixel_clock_khz = _pclk,		\
 		.xres = _x,				\
 		.yres = _y,				\
 		.flags = _flags,			\
 	}
 
 static const struct drm_named_mode drm_named_modes[] = {
-	NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
-	NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2282,6 +2284,7 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 			continue;
 
 		strcpy(cmdline_mode->name, mode->name);
+		cmdline_mode->pixel_clock = mode->pixel_clock_khz;
 		cmdline_mode->xres = mode->xres;
 		cmdline_mode->yres = mode->yres;
 		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 9afc7956fdc6..4927dcb2573f 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1273,6 +1273,13 @@ struct drm_cmdline_mode {
 	 */
 	bool bpp_specified;
 
+	/**
+	 * @pixel_clock:
+	 *
+	 * Pixel Clock in kHz. Optional.
+	 */
+	unsigned int pixel_clock;
+
 	/**
 	 * @xres:
 	 *

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 12/25] drm/connector: Add pixel clock to cmdline mode

[Maxime Ripard]

We'll need to get the pixel clock to generate proper display modes for
all the current named modes. Let's add it to struct drm_cmdline_mode and
fill it when parsing the named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by:w
---
 drivers/gpu/drm/drm_modes.c | 9 ++++++---
 include/drm/drm_connector.h | 7 +++++++
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index acee23e1a8b7..c826f9583a1d 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,22 +2226,24 @@ static int drm_mode_parse_cmdline_options(const char *str,
 
 struct drm_named_mode {
 	const char *name;
+	unsigned int pixel_clock_khz;
 	unsigned int xres;
 	unsigned int yres;
 	unsigned int flags;
 };
 
-#define NAMED_MODE(_name, _x, _y, _flags)		\
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags)	\
 	{						\
 		.name = _name,				\
+		.pixel_clock_khz = _pclk,		\
 		.xres = _x,				\
 		.yres = _y,				\
 		.flags = _flags,			\
 	}
 
 static const struct drm_named_mode drm_named_modes[] = {
-	NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
-	NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2282,6 +2284,7 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 			continue;
 
 		strcpy(cmdline_mode->name, mode->name);
+		cmdline_mode->pixel_clock = mode->pixel_clock_khz;
 		cmdline_mode->xres = mode->xres;
 		cmdline_mode->yres = mode->yres;
 		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 9afc7956fdc6..4927dcb2573f 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1273,6 +1273,13 @@ struct drm_cmdline_mode {
 	 */
 	bool bpp_specified;
 
+	/**
+	 * @pixel_clock:
+	 *
+	 * Pixel Clock in kHz. Optional.
+	 */
+	unsigned int pixel_clock;
+
 	/**
 	 * @xres:
 	 *

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 12/25] drm/connector: Add pixel clock to cmdline mode

[Maxime Ripard]

We'll need to get the pixel clock to generate proper display modes for
all the current named modes. Let's add it to struct drm_cmdline_mode and
fill it when parsing the named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by:w
---
 drivers/gpu/drm/drm_modes.c | 9 ++++++---
 include/drm/drm_connector.h | 7 +++++++
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index acee23e1a8b7..c826f9583a1d 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,22 +2226,24 @@ static int drm_mode_parse_cmdline_options(const char *str,
 
 struct drm_named_mode {
 	const char *name;
+	unsigned int pixel_clock_khz;
 	unsigned int xres;
 	unsigned int yres;
 	unsigned int flags;
 };
 
-#define NAMED_MODE(_name, _x, _y, _flags)		\
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags)	\
 	{						\
 		.name = _name,				\
+		.pixel_clock_khz = _pclk,		\
 		.xres = _x,				\
 		.yres = _y,				\
 		.flags = _flags,			\
 	}
 
 static const struct drm_named_mode drm_named_modes[] = {
-	NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
-	NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2282,6 +2284,7 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 			continue;
 
 		strcpy(cmdline_mode->name, mode->name);
+		cmdline_mode->pixel_clock = mode->pixel_clock_khz;
 		cmdline_mode->xres = mode->xres;
 		cmdline_mode->yres = mode->yres;
 		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 9afc7956fdc6..4927dcb2573f 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1273,6 +1273,13 @@ struct drm_cmdline_mode {
 	 */
 	bool bpp_specified;
 
+	/**
+	 * @pixel_clock:
+	 *
+	 * Pixel Clock in kHz. Optional.
+	 */
+	unsigned int pixel_clock;
+
 	/**
 	 * @xres:
 	 *

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 12/25] drm/connector: Add pixel clock to cmdline mode

[Maxime Ripard]

We'll need to get the pixel clock to generate proper display modes for
all the current named modes. Let's add it to struct drm_cmdline_mode and
fill it when parsing the named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by:w
---
 drivers/gpu/drm/drm_modes.c | 9 ++++++---
 include/drm/drm_connector.h | 7 +++++++
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index acee23e1a8b7..c826f9583a1d 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,22 +2226,24 @@ static int drm_mode_parse_cmdline_options(const char *str,
 
 struct drm_named_mode {
 	const char *name;
+	unsigned int pixel_clock_khz;
 	unsigned int xres;
 	unsigned int yres;
 	unsigned int flags;
 };
 
-#define NAMED_MODE(_name, _x, _y, _flags)		\
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags)	\
 	{						\
 		.name = _name,				\
+		.pixel_clock_khz = _pclk,		\
 		.xres = _x,				\
 		.yres = _y,				\
 		.flags = _flags,			\
 	}
 
 static const struct drm_named_mode drm_named_modes[] = {
-	NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
-	NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2282,6 +2284,7 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 			continue;
 
 		strcpy(cmdline_mode->name, mode->name);
+		cmdline_mode->pixel_clock = mode->pixel_clock_khz;
 		cmdline_mode->xres = mode->xres;
 		cmdline_mode->yres = mode->yres;
 		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 9afc7956fdc6..4927dcb2573f 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1273,6 +1273,13 @@ struct drm_cmdline_mode {
 	 */
 	bool bpp_specified;
 
+	/**
+	 * @pixel_clock:
+	 *
+	 * Pixel Clock in kHz. Optional.
+	 */
+	unsigned int pixel_clock;
+
 	/**
 	 * @xres:
 	 *

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 13/25] drm/connector: Add a function to lookup a TV mode by its name

[Maxime Ripard]

As part of the command line parsing rework coming in the next patches,
we'll need to lookup drm_connector_tv_mode values by their name, already
defined in drm_tv_mode_enum_list.

In order to avoid any code duplication, let's do a function that will
perform a lookup of a TV mode name and return its value.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Switch the single invalid parameterized test to a regular test
- Switch to kunit_test_suite

Changes in v7:
- Add kunit tests
---
 drivers/gpu/drm/drm_connector.c            | 24 ++++++++++
 drivers/gpu/drm/tests/Makefile             |  1 +
 drivers/gpu/drm/tests/drm_connector_test.c | 73 ++++++++++++++++++++++++++++++
 include/drm/drm_connector.h                |  2 +
 4 files changed, 100 insertions(+)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 07d449736956..8d92777e57dd 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -995,6 +995,30 @@ static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
 };
 DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
 
+/**
+ * drm_get_tv_mode_from_name - Translates a TV mode name into its enum value
+ * @name: TV Mode name we want to convert
+ * @len: Length of @name
+ *
+ * Translates @name into an enum drm_connector_tv_mode.
+ *
+ * Returns: the enum value on success, a negative errno otherwise.
+ */
+int drm_get_tv_mode_from_name(const char *name, size_t len)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_tv_mode_enum_list); i++) {
+		const struct drm_prop_enum_list *item = &drm_tv_mode_enum_list[i];
+
+		if (strlen(item->name) == len && !strncmp(item->name, name, len))
+			return item->type;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(drm_get_tv_mode_from_name);
+
 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b22ac96fdd65..c7903c112c65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_buddy_test.o \
 	drm_cmdline_parser_test.o \
+	drm_connector_test.o \
 	drm_damage_helper_test.o \
 	drm_dp_mst_helper_test.o \
 	drm_format_helper_test.o \
diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
new file mode 100644
index 000000000000..4ba9a23599ad
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <drm/drm_connector.h>
+
+#include <kunit/test.h>
+
+struct drm_get_tv_mode_from_name_test {
+	const char *name;
+	enum drm_connector_tv_mode expected_mode;
+};
+
+#define TV_MODE_NAME(_name, _mode)		\
+	{					\
+		.name = _name,			\
+		.expected_mode = _mode,		\
+	}
+
+static void drm_test_get_tv_mode_from_name_valid(struct kunit *test)
+{
+	const struct drm_get_tv_mode_from_name_test *params = test->param_value;
+
+	KUNIT_EXPECT_EQ(test,
+			drm_get_tv_mode_from_name(params->name, strlen(params->name)),
+			params->expected_mode);
+}
+
+static const
+struct drm_get_tv_mode_from_name_test drm_get_tv_mode_from_name_valid_tests[] = {
+	TV_MODE_NAME("NTSC", DRM_MODE_TV_MODE_NTSC),
+	TV_MODE_NAME("NTSC-443", DRM_MODE_TV_MODE_NTSC_443),
+	TV_MODE_NAME("NTSC-J", DRM_MODE_TV_MODE_NTSC_J),
+	TV_MODE_NAME("PAL", DRM_MODE_TV_MODE_PAL),
+	TV_MODE_NAME("PAL-M", DRM_MODE_TV_MODE_PAL_M),
+	TV_MODE_NAME("PAL-N", DRM_MODE_TV_MODE_PAL_N),
+	TV_MODE_NAME("SECAM", DRM_MODE_TV_MODE_SECAM),
+};
+
+static void
+drm_get_tv_mode_from_name_valid_desc(const struct drm_get_tv_mode_from_name_test *t,
+				     char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+
+KUNIT_ARRAY_PARAM(drm_get_tv_mode_from_name_valid,
+		  drm_get_tv_mode_from_name_valid_tests,
+		  drm_get_tv_mode_from_name_valid_desc);
+
+static void drm_test_get_tv_mode_from_name_truncated(struct kunit *test)
+{
+	const char *name = "NTS";
+	int ret;
+
+	ret = drm_get_tv_mode_from_name(name, strlen(name));
+	KUNIT_EXPECT_LT(test, ret, 0);
+};
+
+static struct kunit_case drm_get_tv_mode_from_name_tests[] = {
+	KUNIT_CASE_PARAM(drm_test_get_tv_mode_from_name_valid,
+			 drm_get_tv_mode_from_name_valid_gen_params),
+	KUNIT_CASE(drm_test_get_tv_mode_from_name_truncated),
+	{ }
+};
+
+static struct kunit_suite drm_get_tv_mode_from_name_test_suite = {
+	.name = "drm_get_tv_mode_from_name",
+	.test_cases = drm_get_tv_mode_from_name_tests,
+};
+
+kunit_test_suite(drm_get_tv_mode_from_name_test_suite);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 4927dcb2573f..c856f4871697 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1872,6 +1872,8 @@ const char *drm_get_dp_subconnector_name(int val);
 const char *drm_get_content_protection_name(int val);
 const char *drm_get_hdcp_content_type_name(int val);
 
+int drm_get_tv_mode_from_name(const char *name, size_t len);
+
 int drm_mode_create_dvi_i_properties(struct drm_device *dev);
 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector);
 

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 13/25] drm/connector: Add a function to lookup a TV mode by its name

[Maxime Ripard]

As part of the command line parsing rework coming in the next patches,
we'll need to lookup drm_connector_tv_mode values by their name, already
defined in drm_tv_mode_enum_list.

In order to avoid any code duplication, let's do a function that will
perform a lookup of a TV mode name and return its value.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Switch the single invalid parameterized test to a regular test
- Switch to kunit_test_suite

Changes in v7:
- Add kunit tests
---
 drivers/gpu/drm/drm_connector.c            | 24 ++++++++++
 drivers/gpu/drm/tests/Makefile             |  1 +
 drivers/gpu/drm/tests/drm_connector_test.c | 73 ++++++++++++++++++++++++++++++
 include/drm/drm_connector.h                |  2 +
 4 files changed, 100 insertions(+)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 07d449736956..8d92777e57dd 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -995,6 +995,30 @@ static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
 };
 DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
 
+/**
+ * drm_get_tv_mode_from_name - Translates a TV mode name into its enum value
+ * @name: TV Mode name we want to convert
+ * @len: Length of @name
+ *
+ * Translates @name into an enum drm_connector_tv_mode.
+ *
+ * Returns: the enum value on success, a negative errno otherwise.
+ */
+int drm_get_tv_mode_from_name(const char *name, size_t len)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_tv_mode_enum_list); i++) {
+		const struct drm_prop_enum_list *item = &drm_tv_mode_enum_list[i];
+
+		if (strlen(item->name) == len && !strncmp(item->name, name, len))
+			return item->type;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(drm_get_tv_mode_from_name);
+
 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b22ac96fdd65..c7903c112c65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_buddy_test.o \
 	drm_cmdline_parser_test.o \
+	drm_connector_test.o \
 	drm_damage_helper_test.o \
 	drm_dp_mst_helper_test.o \
 	drm_format_helper_test.o \
diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
new file mode 100644
index 000000000000..4ba9a23599ad
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <drm/drm_connector.h>
+
+#include <kunit/test.h>
+
+struct drm_get_tv_mode_from_name_test {
+	const char *name;
+	enum drm_connector_tv_mode expected_mode;
+};
+
+#define TV_MODE_NAME(_name, _mode)		\
+	{					\
+		.name = _name,			\
+		.expected_mode = _mode,		\
+	}
+
+static void drm_test_get_tv_mode_from_name_valid(struct kunit *test)
+{
+	const struct drm_get_tv_mode_from_name_test *params = test->param_value;
+
+	KUNIT_EXPECT_EQ(test,
+			drm_get_tv_mode_from_name(params->name, strlen(params->name)),
+			params->expected_mode);
+}
+
+static const
+struct drm_get_tv_mode_from_name_test drm_get_tv_mode_from_name_valid_tests[] = {
+	TV_MODE_NAME("NTSC", DRM_MODE_TV_MODE_NTSC),
+	TV_MODE_NAME("NTSC-443", DRM_MODE_TV_MODE_NTSC_443),
+	TV_MODE_NAME("NTSC-J", DRM_MODE_TV_MODE_NTSC_J),
+	TV_MODE_NAME("PAL", DRM_MODE_TV_MODE_PAL),
+	TV_MODE_NAME("PAL-M", DRM_MODE_TV_MODE_PAL_M),
+	TV_MODE_NAME("PAL-N", DRM_MODE_TV_MODE_PAL_N),
+	TV_MODE_NAME("SECAM", DRM_MODE_TV_MODE_SECAM),
+};
+
+static void
+drm_get_tv_mode_from_name_valid_desc(const struct drm_get_tv_mode_from_name_test *t,
+				     char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+
+KUNIT_ARRAY_PARAM(drm_get_tv_mode_from_name_valid,
+		  drm_get_tv_mode_from_name_valid_tests,
+		  drm_get_tv_mode_from_name_valid_desc);
+
+static void drm_test_get_tv_mode_from_name_truncated(struct kunit *test)
+{
+	const char *name = "NTS";
+	int ret;
+
+	ret = drm_get_tv_mode_from_name(name, strlen(name));
+	KUNIT_EXPECT_LT(test, ret, 0);
+};
+
+static struct kunit_case drm_get_tv_mode_from_name_tests[] = {
+	KUNIT_CASE_PARAM(drm_test_get_tv_mode_from_name_valid,
+			 drm_get_tv_mode_from_name_valid_gen_params),
+	KUNIT_CASE(drm_test_get_tv_mode_from_name_truncated),
+	{ }
+};
+
+static struct kunit_suite drm_get_tv_mode_from_name_test_suite = {
+	.name = "drm_get_tv_mode_from_name",
+	.test_cases = drm_get_tv_mode_from_name_tests,
+};
+
+kunit_test_suite(drm_get_tv_mode_from_name_test_suite);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 4927dcb2573f..c856f4871697 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1872,6 +1872,8 @@ const char *drm_get_dp_subconnector_name(int val);
 const char *drm_get_content_protection_name(int val);
 const char *drm_get_hdcp_content_type_name(int val);
 
+int drm_get_tv_mode_from_name(const char *name, size_t len);
+
 int drm_mode_create_dvi_i_properties(struct drm_device *dev);
 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector);
 

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 13/25] drm/connector: Add a function to lookup a TV mode by its name

[Maxime Ripard]

As part of the command line parsing rework coming in the next patches,
we'll need to lookup drm_connector_tv_mode values by their name, already
defined in drm_tv_mode_enum_list.

In order to avoid any code duplication, let's do a function that will
perform a lookup of a TV mode name and return its value.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Switch the single invalid parameterized test to a regular test
- Switch to kunit_test_suite

Changes in v7:
- Add kunit tests
---
 drivers/gpu/drm/drm_connector.c            | 24 ++++++++++
 drivers/gpu/drm/tests/Makefile             |  1 +
 drivers/gpu/drm/tests/drm_connector_test.c | 73 ++++++++++++++++++++++++++++++
 include/drm/drm_connector.h                |  2 +
 4 files changed, 100 insertions(+)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 07d449736956..8d92777e57dd 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -995,6 +995,30 @@ static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
 };
 DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
 
+/**
+ * drm_get_tv_mode_from_name - Translates a TV mode name into its enum value
+ * @name: TV Mode name we want to convert
+ * @len: Length of @name
+ *
+ * Translates @name into an enum drm_connector_tv_mode.
+ *
+ * Returns: the enum value on success, a negative errno otherwise.
+ */
+int drm_get_tv_mode_from_name(const char *name, size_t len)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_tv_mode_enum_list); i++) {
+		const struct drm_prop_enum_list *item = &drm_tv_mode_enum_list[i];
+
+		if (strlen(item->name) == len && !strncmp(item->name, name, len))
+			return item->type;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(drm_get_tv_mode_from_name);
+
 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b22ac96fdd65..c7903c112c65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_buddy_test.o \
 	drm_cmdline_parser_test.o \
+	drm_connector_test.o \
 	drm_damage_helper_test.o \
 	drm_dp_mst_helper_test.o \
 	drm_format_helper_test.o \
diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
new file mode 100644
index 000000000000..4ba9a23599ad
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <drm/drm_connector.h>
+
+#include <kunit/test.h>
+
+struct drm_get_tv_mode_from_name_test {
+	const char *name;
+	enum drm_connector_tv_mode expected_mode;
+};
+
+#define TV_MODE_NAME(_name, _mode)		\
+	{					\
+		.name = _name,			\
+		.expected_mode = _mode,		\
+	}
+
+static void drm_test_get_tv_mode_from_name_valid(struct kunit *test)
+{
+	const struct drm_get_tv_mode_from_name_test *params = test->param_value;
+
+	KUNIT_EXPECT_EQ(test,
+			drm_get_tv_mode_from_name(params->name, strlen(params->name)),
+			params->expected_mode);
+}
+
+static const
+struct drm_get_tv_mode_from_name_test drm_get_tv_mode_from_name_valid_tests[] = {
+	TV_MODE_NAME("NTSC", DRM_MODE_TV_MODE_NTSC),
+	TV_MODE_NAME("NTSC-443", DRM_MODE_TV_MODE_NTSC_443),
+	TV_MODE_NAME("NTSC-J", DRM_MODE_TV_MODE_NTSC_J),
+	TV_MODE_NAME("PAL", DRM_MODE_TV_MODE_PAL),
+	TV_MODE_NAME("PAL-M", DRM_MODE_TV_MODE_PAL_M),
+	TV_MODE_NAME("PAL-N", DRM_MODE_TV_MODE_PAL_N),
+	TV_MODE_NAME("SECAM", DRM_MODE_TV_MODE_SECAM),
+};
+
+static void
+drm_get_tv_mode_from_name_valid_desc(const struct drm_get_tv_mode_from_name_test *t,
+				     char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+
+KUNIT_ARRAY_PARAM(drm_get_tv_mode_from_name_valid,
+		  drm_get_tv_mode_from_name_valid_tests,
+		  drm_get_tv_mode_from_name_valid_desc);
+
+static void drm_test_get_tv_mode_from_name_truncated(struct kunit *test)
+{
+	const char *name = "NTS";
+	int ret;
+
+	ret = drm_get_tv_mode_from_name(name, strlen(name));
+	KUNIT_EXPECT_LT(test, ret, 0);
+};
+
+static struct kunit_case drm_get_tv_mode_from_name_tests[] = {
+	KUNIT_CASE_PARAM(drm_test_get_tv_mode_from_name_valid,
+			 drm_get_tv_mode_from_name_valid_gen_params),
+	KUNIT_CASE(drm_test_get_tv_mode_from_name_truncated),
+	{ }
+};
+
+static struct kunit_suite drm_get_tv_mode_from_name_test_suite = {
+	.name = "drm_get_tv_mode_from_name",
+	.test_cases = drm_get_tv_mode_from_name_tests,
+};
+
+kunit_test_suite(drm_get_tv_mode_from_name_test_suite);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 4927dcb2573f..c856f4871697 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1872,6 +1872,8 @@ const char *drm_get_dp_subconnector_name(int val);
 const char *drm_get_content_protection_name(int val);
 const char *drm_get_hdcp_content_type_name(int val);
 
+int drm_get_tv_mode_from_name(const char *name, size_t len);
+
 int drm_mode_create_dvi_i_properties(struct drm_device *dev);
 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector);
 

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 13/25] drm/connector: Add a function to lookup a TV mode by its name

[Maxime Ripard]

As part of the command line parsing rework coming in the next patches,
we'll need to lookup drm_connector_tv_mode values by their name, already
defined in drm_tv_mode_enum_list.

In order to avoid any code duplication, let's do a function that will
perform a lookup of a TV mode name and return its value.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Switch the single invalid parameterized test to a regular test
- Switch to kunit_test_suite

Changes in v7:
- Add kunit tests
---
 drivers/gpu/drm/drm_connector.c            | 24 ++++++++++
 drivers/gpu/drm/tests/Makefile             |  1 +
 drivers/gpu/drm/tests/drm_connector_test.c | 73 ++++++++++++++++++++++++++++++
 include/drm/drm_connector.h                |  2 +
 4 files changed, 100 insertions(+)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 07d449736956..8d92777e57dd 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -995,6 +995,30 @@ static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
 };
 DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
 
+/**
+ * drm_get_tv_mode_from_name - Translates a TV mode name into its enum value
+ * @name: TV Mode name we want to convert
+ * @len: Length of @name
+ *
+ * Translates @name into an enum drm_connector_tv_mode.
+ *
+ * Returns: the enum value on success, a negative errno otherwise.
+ */
+int drm_get_tv_mode_from_name(const char *name, size_t len)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_tv_mode_enum_list); i++) {
+		const struct drm_prop_enum_list *item = &drm_tv_mode_enum_list[i];
+
+		if (strlen(item->name) == len && !strncmp(item->name, name, len))
+			return item->type;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(drm_get_tv_mode_from_name);
+
 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b22ac96fdd65..c7903c112c65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_buddy_test.o \
 	drm_cmdline_parser_test.o \
+	drm_connector_test.o \
 	drm_damage_helper_test.o \
 	drm_dp_mst_helper_test.o \
 	drm_format_helper_test.o \
diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
new file mode 100644
index 000000000000..4ba9a23599ad
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <drm/drm_connector.h>
+
+#include <kunit/test.h>
+
+struct drm_get_tv_mode_from_name_test {
+	const char *name;
+	enum drm_connector_tv_mode expected_mode;
+};
+
+#define TV_MODE_NAME(_name, _mode)		\
+	{					\
+		.name = _name,			\
+		.expected_mode = _mode,		\
+	}
+
+static void drm_test_get_tv_mode_from_name_valid(struct kunit *test)
+{
+	const struct drm_get_tv_mode_from_name_test *params = test->param_value;
+
+	KUNIT_EXPECT_EQ(test,
+			drm_get_tv_mode_from_name(params->name, strlen(params->name)),
+			params->expected_mode);
+}
+
+static const
+struct drm_get_tv_mode_from_name_test drm_get_tv_mode_from_name_valid_tests[] = {
+	TV_MODE_NAME("NTSC", DRM_MODE_TV_MODE_NTSC),
+	TV_MODE_NAME("NTSC-443", DRM_MODE_TV_MODE_NTSC_443),
+	TV_MODE_NAME("NTSC-J", DRM_MODE_TV_MODE_NTSC_J),
+	TV_MODE_NAME("PAL", DRM_MODE_TV_MODE_PAL),
+	TV_MODE_NAME("PAL-M", DRM_MODE_TV_MODE_PAL_M),
+	TV_MODE_NAME("PAL-N", DRM_MODE_TV_MODE_PAL_N),
+	TV_MODE_NAME("SECAM", DRM_MODE_TV_MODE_SECAM),
+};
+
+static void
+drm_get_tv_mode_from_name_valid_desc(const struct drm_get_tv_mode_from_name_test *t,
+				     char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+
+KUNIT_ARRAY_PARAM(drm_get_tv_mode_from_name_valid,
+		  drm_get_tv_mode_from_name_valid_tests,
+		  drm_get_tv_mode_from_name_valid_desc);
+
+static void drm_test_get_tv_mode_from_name_truncated(struct kunit *test)
+{
+	const char *name = "NTS";
+	int ret;
+
+	ret = drm_get_tv_mode_from_name(name, strlen(name));
+	KUNIT_EXPECT_LT(test, ret, 0);
+};
+
+static struct kunit_case drm_get_tv_mode_from_name_tests[] = {
+	KUNIT_CASE_PARAM(drm_test_get_tv_mode_from_name_valid,
+			 drm_get_tv_mode_from_name_valid_gen_params),
+	KUNIT_CASE(drm_test_get_tv_mode_from_name_truncated),
+	{ }
+};
+
+static struct kunit_suite drm_get_tv_mode_from_name_test_suite = {
+	.name = "drm_get_tv_mode_from_name",
+	.test_cases = drm_get_tv_mode_from_name_tests,
+};
+
+kunit_test_suite(drm_get_tv_mode_from_name_test_suite);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 4927dcb2573f..c856f4871697 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1872,6 +1872,8 @@ const char *drm_get_dp_subconnector_name(int val);
 const char *drm_get_content_protection_name(int val);
 const char *drm_get_hdcp_content_type_name(int val);
 
+int drm_get_tv_mode_from_name(const char *name, size_t len);
+
 int drm_mode_create_dvi_i_properties(struct drm_device *dev);
 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector);
 

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 13/25] drm/connector: Add a function to lookup a TV mode by its name

[Maxime Ripard]

As part of the command line parsing rework coming in the next patches,
we'll need to lookup drm_connector_tv_mode values by their name, already
defined in drm_tv_mode_enum_list.

In order to avoid any code duplication, let's do a function that will
perform a lookup of a TV mode name and return its value.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Switch the single invalid parameterized test to a regular test
- Switch to kunit_test_suite

Changes in v7:
- Add kunit tests
---
 drivers/gpu/drm/drm_connector.c            | 24 ++++++++++
 drivers/gpu/drm/tests/Makefile             |  1 +
 drivers/gpu/drm/tests/drm_connector_test.c | 73 ++++++++++++++++++++++++++++++
 include/drm/drm_connector.h                |  2 +
 4 files changed, 100 insertions(+)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 07d449736956..8d92777e57dd 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -995,6 +995,30 @@ static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
 };
 DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
 
+/**
+ * drm_get_tv_mode_from_name - Translates a TV mode name into its enum value
+ * @name: TV Mode name we want to convert
+ * @len: Length of @name
+ *
+ * Translates @name into an enum drm_connector_tv_mode.
+ *
+ * Returns: the enum value on success, a negative errno otherwise.
+ */
+int drm_get_tv_mode_from_name(const char *name, size_t len)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_tv_mode_enum_list); i++) {
+		const struct drm_prop_enum_list *item = &drm_tv_mode_enum_list[i];
+
+		if (strlen(item->name) == len && !strncmp(item->name, name, len))
+			return item->type;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(drm_get_tv_mode_from_name);
+
 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b22ac96fdd65..c7903c112c65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_buddy_test.o \
 	drm_cmdline_parser_test.o \
+	drm_connector_test.o \
 	drm_damage_helper_test.o \
 	drm_dp_mst_helper_test.o \
 	drm_format_helper_test.o \
diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
new file mode 100644
index 000000000000..4ba9a23599ad
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <drm/drm_connector.h>
+
+#include <kunit/test.h>
+
+struct drm_get_tv_mode_from_name_test {
+	const char *name;
+	enum drm_connector_tv_mode expected_mode;
+};
+
+#define TV_MODE_NAME(_name, _mode)		\
+	{					\
+		.name = _name,			\
+		.expected_mode = _mode,		\
+	}
+
+static void drm_test_get_tv_mode_from_name_valid(struct kunit *test)
+{
+	const struct drm_get_tv_mode_from_name_test *params = test->param_value;
+
+	KUNIT_EXPECT_EQ(test,
+			drm_get_tv_mode_from_name(params->name, strlen(params->name)),
+			params->expected_mode);
+}
+
+static const
+struct drm_get_tv_mode_from_name_test drm_get_tv_mode_from_name_valid_tests[] = {
+	TV_MODE_NAME("NTSC", DRM_MODE_TV_MODE_NTSC),
+	TV_MODE_NAME("NTSC-443", DRM_MODE_TV_MODE_NTSC_443),
+	TV_MODE_NAME("NTSC-J", DRM_MODE_TV_MODE_NTSC_J),
+	TV_MODE_NAME("PAL", DRM_MODE_TV_MODE_PAL),
+	TV_MODE_NAME("PAL-M", DRM_MODE_TV_MODE_PAL_M),
+	TV_MODE_NAME("PAL-N", DRM_MODE_TV_MODE_PAL_N),
+	TV_MODE_NAME("SECAM", DRM_MODE_TV_MODE_SECAM),
+};
+
+static void
+drm_get_tv_mode_from_name_valid_desc(const struct drm_get_tv_mode_from_name_test *t,
+				     char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+
+KUNIT_ARRAY_PARAM(drm_get_tv_mode_from_name_valid,
+		  drm_get_tv_mode_from_name_valid_tests,
+		  drm_get_tv_mode_from_name_valid_desc);
+
+static void drm_test_get_tv_mode_from_name_truncated(struct kunit *test)
+{
+	const char *name = "NTS";
+	int ret;
+
+	ret = drm_get_tv_mode_from_name(name, strlen(name));
+	KUNIT_EXPECT_LT(test, ret, 0);
+};
+
+static struct kunit_case drm_get_tv_mode_from_name_tests[] = {
+	KUNIT_CASE_PARAM(drm_test_get_tv_mode_from_name_valid,
+			 drm_get_tv_mode_from_name_valid_gen_params),
+	KUNIT_CASE(drm_test_get_tv_mode_from_name_truncated),
+	{ }
+};
+
+static struct kunit_suite drm_get_tv_mode_from_name_test_suite = {
+	.name = "drm_get_tv_mode_from_name",
+	.test_cases = drm_get_tv_mode_from_name_tests,
+};
+
+kunit_test_suite(drm_get_tv_mode_from_name_test_suite);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 4927dcb2573f..c856f4871697 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1872,6 +1872,8 @@ const char *drm_get_dp_subconnector_name(int val);
 const char *drm_get_content_protection_name(int val);
 const char *drm_get_hdcp_content_type_name(int val);
 
+int drm_get_tv_mode_from_name(const char *name, size_t len);
+
 int drm_mode_create_dvi_i_properties(struct drm_device *dev);
 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector);
 

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 14/25] drm/modes: Introduce the tv_mode property as a command-line option

[Maxime Ripard]

Our new tv mode option allows to specify the TV mode from a property.
However, it can still be useful, for example to avoid any boot time
artifact, to set that property directly from the kernel command line.

Let's add some code to allow it, and some unit tests to exercise that code.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by

Changes in v6:
- Add a tv_mode_specified field

Changes in v4:
- Add Documentation of the command-line option to modedb.rst
---
 Documentation/fb/modedb.rst                     |  2 +
 drivers/gpu/drm/drm_modes.c                     | 37 ++++++++++++--
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c | 67 +++++++++++++++++++++++++
 include/drm/drm_connector.h                     | 12 +++++
 4 files changed, 115 insertions(+), 3 deletions(-)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index e53375033146..bebfe61caa77 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -70,6 +70,8 @@ Valid options are::
   - reflect_y (boolean): Perform an axial symmetry on the Y axis
   - rotate (integer): Rotate the initial framebuffer by x
     degrees. Valid values are 0, 90, 180 and 270.
+  - tv_mode: Analog TV mode. One of "NTSC", "NTSC-443", "NTSC-J", "PAL",
+    "PAL-M", "PAL-N", or "SECAM".
   - panel_orientation, one of "normal", "upside_down", "left_side_up", or
     "right_side_up". For KMS drivers only, this sets the "panel orientation"
     property on the kms connector as hint for kms users.
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index c826f9583a1d..dc037f7ceb37 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2133,6 +2133,30 @@ static int drm_mode_parse_panel_orientation(const char *delim,
 	return 0;
 }
 
+static int drm_mode_parse_tv_mode(const char *delim,
+				  struct drm_cmdline_mode *mode)
+{
+	const char *value;
+	int ret;
+
+	if (*delim != '=')
+		return -EINVAL;
+
+	value = delim + 1;
+	delim = strchr(value, ',');
+	if (!delim)
+		delim = value + strlen(value);
+
+	ret = drm_get_tv_mode_from_name(value, delim - value);
+	if (ret < 0)
+		return ret;
+
+	mode->tv_mode_specified = true;
+	mode->tv_mode = ret;
+
+	return 0;
+}
+
 static int drm_mode_parse_cmdline_options(const char *str,
 					  bool freestanding,
 					  const struct drm_connector *connector,
@@ -2202,6 +2226,9 @@ static int drm_mode_parse_cmdline_options(const char *str,
 		} else if (!strncmp(option, "panel_orientation", delim - option)) {
 			if (drm_mode_parse_panel_orientation(delim, mode))
 				return -EINVAL;
+		} else if (!strncmp(option, "tv_mode", delim - option)) {
+			if (drm_mode_parse_tv_mode(delim, mode))
+				return -EINVAL;
 		} else {
 			return -EINVAL;
 		}
@@ -2230,20 +2257,22 @@ struct drm_named_mode {
 	unsigned int xres;
 	unsigned int yres;
 	unsigned int flags;
+	unsigned int tv_mode;
 };
 
-#define NAMED_MODE(_name, _pclk, _x, _y, _flags)	\
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags, _mode)	\
 	{						\
 		.name = _name,				\
 		.pixel_clock_khz = _pclk,		\
 		.xres = _x,				\
 		.yres = _y,				\
 		.flags = _flags,			\
+		.tv_mode = _mode,			\
 	}
 
 static const struct drm_named_mode drm_named_modes[] = {
-	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
-	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC),
+	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2288,6 +2317,8 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 		cmdline_mode->xres = mode->xres;
 		cmdline_mode->yres = mode->yres;
 		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+		cmdline_mode->tv_mode = mode->tv_mode;
+		cmdline_mode->tv_mode_specified = true;
 		cmdline_mode->specified = true;
 
 		return 1;
diff --git a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
index 34790e7a3760..3e711b83b823 100644
--- a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
+++ b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
@@ -927,6 +927,14 @@ static const struct drm_cmdline_invalid_test drm_cmdline_invalid_tests[] = {
 		.name = "invalid_option",
 		.cmdline = "720x480,test=42",
 	},
+	{
+		.name = "invalid_tv_option",
+		.cmdline = "720x480i,tv_mode=invalid",
+	},
+	{
+		.name = "truncated_tv_option",
+		.cmdline = "720x480i,tv_mode=NTS",
+	},
 };
 
 static void drm_cmdline_invalid_desc(const struct drm_cmdline_invalid_test *t,
@@ -937,6 +945,64 @@ static void drm_cmdline_invalid_desc(const struct drm_cmdline_invalid_test *t,
 
 KUNIT_ARRAY_PARAM(drm_cmdline_invalid, drm_cmdline_invalid_tests, drm_cmdline_invalid_desc);
 
+struct drm_cmdline_tv_option_test {
+	const char *name;
+	const char *cmdline;
+	struct drm_display_mode *(*mode_fn)(struct drm_device *dev);
+	enum drm_connector_tv_mode tv_mode;
+};
+
+static void drm_test_cmdline_tv_options(struct kunit *test)
+{
+	const struct drm_cmdline_tv_option_test *params = test->param_value;
+	const struct drm_display_mode *expected_mode = params->mode_fn(NULL);
+	struct drm_cmdline_mode mode = { };
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_parse_command_line_for_connector(params->cmdline,
+									  &no_connector, &mode));
+	KUNIT_EXPECT_TRUE(test, mode.specified);
+	KUNIT_EXPECT_EQ(test, mode.xres, expected_mode->hdisplay);
+	KUNIT_EXPECT_EQ(test, mode.yres, expected_mode->vdisplay);
+	KUNIT_EXPECT_EQ(test, mode.tv_mode, params->tv_mode);
+
+	KUNIT_EXPECT_FALSE(test, mode.refresh_specified);
+
+	KUNIT_EXPECT_FALSE(test, mode.bpp_specified);
+
+	KUNIT_EXPECT_FALSE(test, mode.rb);
+	KUNIT_EXPECT_FALSE(test, mode.cvt);
+	KUNIT_EXPECT_EQ(test, mode.interlace, !!(expected_mode->flags & DRM_MODE_FLAG_INTERLACE));
+	KUNIT_EXPECT_FALSE(test, mode.margins);
+	KUNIT_EXPECT_EQ(test, mode.force, DRM_FORCE_UNSPECIFIED);
+}
+
+#define TV_OPT_TEST(_opt, _cmdline, _mode_fn)		\
+	{						\
+		.name = #_opt,				\
+		.cmdline = _cmdline,			\
+		.mode_fn = _mode_fn,			\
+		.tv_mode = DRM_MODE_TV_MODE_ ## _opt,	\
+	}
+
+static const struct drm_cmdline_tv_option_test drm_cmdline_tv_option_tests[] = {
+	TV_OPT_TEST(NTSC, "720x480i,tv_mode=NTSC", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(NTSC_443, "720x480i,tv_mode=NTSC-443", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(NTSC_J, "720x480i,tv_mode=NTSC-J", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(PAL, "720x576i,tv_mode=PAL", drm_mode_analog_pal_576i),
+	TV_OPT_TEST(PAL_M, "720x480i,tv_mode=PAL-M", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(PAL_N, "720x576i,tv_mode=PAL-N", drm_mode_analog_pal_576i),
+	TV_OPT_TEST(SECAM, "720x576i,tv_mode=SECAM", drm_mode_analog_pal_576i),
+};
+
+static void drm_cmdline_tv_option_desc(const struct drm_cmdline_tv_option_test *t,
+				       char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+KUNIT_ARRAY_PARAM(drm_cmdline_tv_option,
+		  drm_cmdline_tv_option_tests,
+		  drm_cmdline_tv_option_desc);
+
 static struct kunit_case drm_cmdline_parser_tests[] = {
 	KUNIT_CASE(drm_test_cmdline_force_d_only),
 	KUNIT_CASE(drm_test_cmdline_force_D_only_dvi),
@@ -977,6 +1043,7 @@ static struct kunit_case drm_cmdline_parser_tests[] = {
 	KUNIT_CASE(drm_test_cmdline_freestanding_force_e_and_options),
 	KUNIT_CASE(drm_test_cmdline_panel_orientation),
 	KUNIT_CASE_PARAM(drm_test_cmdline_invalid, drm_cmdline_invalid_gen_params),
+	KUNIT_CASE_PARAM(drm_test_cmdline_tv_options, drm_cmdline_tv_option_gen_params),
 	{}
 };
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index c856f4871697..ffca0a857d53 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1368,6 +1368,18 @@ struct drm_cmdline_mode {
 	 * @tv_margins: TV margins to apply to the mode.
 	 */
 	struct drm_connector_tv_margins tv_margins;
+
+	/**
+	 * @tv_mode: TV mode standard. See DRM_MODE_TV_MODE_*.
+	 */
+	enum drm_connector_tv_mode tv_mode;
+
+	/**
+	 * @tv_mode_specified:
+	 *
+	 * Did the mode have a preferred TV mode?
+	 */
+	bool tv_mode_specified;
 };
 
 /**

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 14/25] drm/modes: Introduce the tv_mode property as a command-line option

[Maxime Ripard]

Our new tv mode option allows to specify the TV mode from a property.
However, it can still be useful, for example to avoid any boot time
artifact, to set that property directly from the kernel command line.

Let's add some code to allow it, and some unit tests to exercise that code.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by

Changes in v6:
- Add a tv_mode_specified field

Changes in v4:
- Add Documentation of the command-line option to modedb.rst
---
 Documentation/fb/modedb.rst                     |  2 +
 drivers/gpu/drm/drm_modes.c                     | 37 ++++++++++++--
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c | 67 +++++++++++++++++++++++++
 include/drm/drm_connector.h                     | 12 +++++
 4 files changed, 115 insertions(+), 3 deletions(-)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index e53375033146..bebfe61caa77 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -70,6 +70,8 @@ Valid options are::
   - reflect_y (boolean): Perform an axial symmetry on the Y axis
   - rotate (integer): Rotate the initial framebuffer by x
     degrees. Valid values are 0, 90, 180 and 270.
+  - tv_mode: Analog TV mode. One of "NTSC", "NTSC-443", "NTSC-J", "PAL",
+    "PAL-M", "PAL-N", or "SECAM".
   - panel_orientation, one of "normal", "upside_down", "left_side_up", or
     "right_side_up". For KMS drivers only, this sets the "panel orientation"
     property on the kms connector as hint for kms users.
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index c826f9583a1d..dc037f7ceb37 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2133,6 +2133,30 @@ static int drm_mode_parse_panel_orientation(const char *delim,
 	return 0;
 }
 
+static int drm_mode_parse_tv_mode(const char *delim,
+				  struct drm_cmdline_mode *mode)
+{
+	const char *value;
+	int ret;
+
+	if (*delim != '=')
+		return -EINVAL;
+
+	value = delim + 1;
+	delim = strchr(value, ',');
+	if (!delim)
+		delim = value + strlen(value);
+
+	ret = drm_get_tv_mode_from_name(value, delim - value);
+	if (ret < 0)
+		return ret;
+
+	mode->tv_mode_specified = true;
+	mode->tv_mode = ret;
+
+	return 0;
+}
+
 static int drm_mode_parse_cmdline_options(const char *str,
 					  bool freestanding,
 					  const struct drm_connector *connector,
@@ -2202,6 +2226,9 @@ static int drm_mode_parse_cmdline_options(const char *str,
 		} else if (!strncmp(option, "panel_orientation", delim - option)) {
 			if (drm_mode_parse_panel_orientation(delim, mode))
 				return -EINVAL;
+		} else if (!strncmp(option, "tv_mode", delim - option)) {
+			if (drm_mode_parse_tv_mode(delim, mode))
+				return -EINVAL;
 		} else {
 			return -EINVAL;
 		}
@@ -2230,20 +2257,22 @@ struct drm_named_mode {
 	unsigned int xres;
 	unsigned int yres;
 	unsigned int flags;
+	unsigned int tv_mode;
 };
 
-#define NAMED_MODE(_name, _pclk, _x, _y, _flags)	\
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags, _mode)	\
 	{						\
 		.name = _name,				\
 		.pixel_clock_khz = _pclk,		\
 		.xres = _x,				\
 		.yres = _y,				\
 		.flags = _flags,			\
+		.tv_mode = _mode,			\
 	}
 
 static const struct drm_named_mode drm_named_modes[] = {
-	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
-	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC),
+	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2288,6 +2317,8 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 		cmdline_mode->xres = mode->xres;
 		cmdline_mode->yres = mode->yres;
 		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+		cmdline_mode->tv_mode = mode->tv_mode;
+		cmdline_mode->tv_mode_specified = true;
 		cmdline_mode->specified = true;
 
 		return 1;
diff --git a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
index 34790e7a3760..3e711b83b823 100644
--- a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
+++ b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
@@ -927,6 +927,14 @@ static const struct drm_cmdline_invalid_test drm_cmdline_invalid_tests[] = {
 		.name = "invalid_option",
 		.cmdline = "720x480,test=42",
 	},
+	{
+		.name = "invalid_tv_option",
+		.cmdline = "720x480i,tv_mode=invalid",
+	},
+	{
+		.name = "truncated_tv_option",
+		.cmdline = "720x480i,tv_mode=NTS",
+	},
 };
 
 static void drm_cmdline_invalid_desc(const struct drm_cmdline_invalid_test *t,
@@ -937,6 +945,64 @@ static void drm_cmdline_invalid_desc(const struct drm_cmdline_invalid_test *t,
 
 KUNIT_ARRAY_PARAM(drm_cmdline_invalid, drm_cmdline_invalid_tests, drm_cmdline_invalid_desc);
 
+struct drm_cmdline_tv_option_test {
+	const char *name;
+	const char *cmdline;
+	struct drm_display_mode *(*mode_fn)(struct drm_device *dev);
+	enum drm_connector_tv_mode tv_mode;
+};
+
+static void drm_test_cmdline_tv_options(struct kunit *test)
+{
+	const struct drm_cmdline_tv_option_test *params = test->param_value;
+	const struct drm_display_mode *expected_mode = params->mode_fn(NULL);
+	struct drm_cmdline_mode mode = { };
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_parse_command_line_for_connector(params->cmdline,
+									  &no_connector, &mode));
+	KUNIT_EXPECT_TRUE(test, mode.specified);
+	KUNIT_EXPECT_EQ(test, mode.xres, expected_mode->hdisplay);
+	KUNIT_EXPECT_EQ(test, mode.yres, expected_mode->vdisplay);
+	KUNIT_EXPECT_EQ(test, mode.tv_mode, params->tv_mode);
+
+	KUNIT_EXPECT_FALSE(test, mode.refresh_specified);
+
+	KUNIT_EXPECT_FALSE(test, mode.bpp_specified);
+
+	KUNIT_EXPECT_FALSE(test, mode.rb);
+	KUNIT_EXPECT_FALSE(test, mode.cvt);
+	KUNIT_EXPECT_EQ(test, mode.interlace, !!(expected_mode->flags & DRM_MODE_FLAG_INTERLACE));
+	KUNIT_EXPECT_FALSE(test, mode.margins);
+	KUNIT_EXPECT_EQ(test, mode.force, DRM_FORCE_UNSPECIFIED);
+}
+
+#define TV_OPT_TEST(_opt, _cmdline, _mode_fn)		\
+	{						\
+		.name = #_opt,				\
+		.cmdline = _cmdline,			\
+		.mode_fn = _mode_fn,			\
+		.tv_mode = DRM_MODE_TV_MODE_ ## _opt,	\
+	}
+
+static const struct drm_cmdline_tv_option_test drm_cmdline_tv_option_tests[] = {
+	TV_OPT_TEST(NTSC, "720x480i,tv_mode=NTSC", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(NTSC_443, "720x480i,tv_mode=NTSC-443", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(NTSC_J, "720x480i,tv_mode=NTSC-J", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(PAL, "720x576i,tv_mode=PAL", drm_mode_analog_pal_576i),
+	TV_OPT_TEST(PAL_M, "720x480i,tv_mode=PAL-M", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(PAL_N, "720x576i,tv_mode=PAL-N", drm_mode_analog_pal_576i),
+	TV_OPT_TEST(SECAM, "720x576i,tv_mode=SECAM", drm_mode_analog_pal_576i),
+};
+
+static void drm_cmdline_tv_option_desc(const struct drm_cmdline_tv_option_test *t,
+				       char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+KUNIT_ARRAY_PARAM(drm_cmdline_tv_option,
+		  drm_cmdline_tv_option_tests,
+		  drm_cmdline_tv_option_desc);
+
 static struct kunit_case drm_cmdline_parser_tests[] = {
 	KUNIT_CASE(drm_test_cmdline_force_d_only),
 	KUNIT_CASE(drm_test_cmdline_force_D_only_dvi),
@@ -977,6 +1043,7 @@ static struct kunit_case drm_cmdline_parser_tests[] = {
 	KUNIT_CASE(drm_test_cmdline_freestanding_force_e_and_options),
 	KUNIT_CASE(drm_test_cmdline_panel_orientation),
 	KUNIT_CASE_PARAM(drm_test_cmdline_invalid, drm_cmdline_invalid_gen_params),
+	KUNIT_CASE_PARAM(drm_test_cmdline_tv_options, drm_cmdline_tv_option_gen_params),
 	{}
 };
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index c856f4871697..ffca0a857d53 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1368,6 +1368,18 @@ struct drm_cmdline_mode {
 	 * @tv_margins: TV margins to apply to the mode.
 	 */
 	struct drm_connector_tv_margins tv_margins;
+
+	/**
+	 * @tv_mode: TV mode standard. See DRM_MODE_TV_MODE_*.
+	 */
+	enum drm_connector_tv_mode tv_mode;
+
+	/**
+	 * @tv_mode_specified:
+	 *
+	 * Did the mode have a preferred TV mode?
+	 */
+	bool tv_mode_specified;
 };
 
 /**

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 14/25] drm/modes: Introduce the tv_mode property as a command-line option

[Maxime Ripard]

Our new tv mode option allows to specify the TV mode from a property.
However, it can still be useful, for example to avoid any boot time
artifact, to set that property directly from the kernel command line.

Let's add some code to allow it, and some unit tests to exercise that code.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by

Changes in v6:
- Add a tv_mode_specified field

Changes in v4:
- Add Documentation of the command-line option to modedb.rst
---
 Documentation/fb/modedb.rst                     |  2 +
 drivers/gpu/drm/drm_modes.c                     | 37 ++++++++++++--
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c | 67 +++++++++++++++++++++++++
 include/drm/drm_connector.h                     | 12 +++++
 4 files changed, 115 insertions(+), 3 deletions(-)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index e53375033146..bebfe61caa77 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -70,6 +70,8 @@ Valid options are::
   - reflect_y (boolean): Perform an axial symmetry on the Y axis
   - rotate (integer): Rotate the initial framebuffer by x
     degrees. Valid values are 0, 90, 180 and 270.
+  - tv_mode: Analog TV mode. One of "NTSC", "NTSC-443", "NTSC-J", "PAL",
+    "PAL-M", "PAL-N", or "SECAM".
   - panel_orientation, one of "normal", "upside_down", "left_side_up", or
     "right_side_up". For KMS drivers only, this sets the "panel orientation"
     property on the kms connector as hint for kms users.
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index c826f9583a1d..dc037f7ceb37 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2133,6 +2133,30 @@ static int drm_mode_parse_panel_orientation(const char *delim,
 	return 0;
 }
 
+static int drm_mode_parse_tv_mode(const char *delim,
+				  struct drm_cmdline_mode *mode)
+{
+	const char *value;
+	int ret;
+
+	if (*delim != '=')
+		return -EINVAL;
+
+	value = delim + 1;
+	delim = strchr(value, ',');
+	if (!delim)
+		delim = value + strlen(value);
+
+	ret = drm_get_tv_mode_from_name(value, delim - value);
+	if (ret < 0)
+		return ret;
+
+	mode->tv_mode_specified = true;
+	mode->tv_mode = ret;
+
+	return 0;
+}
+
 static int drm_mode_parse_cmdline_options(const char *str,
 					  bool freestanding,
 					  const struct drm_connector *connector,
@@ -2202,6 +2226,9 @@ static int drm_mode_parse_cmdline_options(const char *str,
 		} else if (!strncmp(option, "panel_orientation", delim - option)) {
 			if (drm_mode_parse_panel_orientation(delim, mode))
 				return -EINVAL;
+		} else if (!strncmp(option, "tv_mode", delim - option)) {
+			if (drm_mode_parse_tv_mode(delim, mode))
+				return -EINVAL;
 		} else {
 			return -EINVAL;
 		}
@@ -2230,20 +2257,22 @@ struct drm_named_mode {
 	unsigned int xres;
 	unsigned int yres;
 	unsigned int flags;
+	unsigned int tv_mode;
 };
 
-#define NAMED_MODE(_name, _pclk, _x, _y, _flags)	\
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags, _mode)	\
 	{						\
 		.name = _name,				\
 		.pixel_clock_khz = _pclk,		\
 		.xres = _x,				\
 		.yres = _y,				\
 		.flags = _flags,			\
+		.tv_mode = _mode,			\
 	}
 
 static const struct drm_named_mode drm_named_modes[] = {
-	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
-	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC),
+	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2288,6 +2317,8 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 		cmdline_mode->xres = mode->xres;
 		cmdline_mode->yres = mode->yres;
 		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+		cmdline_mode->tv_mode = mode->tv_mode;
+		cmdline_mode->tv_mode_specified = true;
 		cmdline_mode->specified = true;
 
 		return 1;
diff --git a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
index 34790e7a3760..3e711b83b823 100644
--- a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
+++ b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
@@ -927,6 +927,14 @@ static const struct drm_cmdline_invalid_test drm_cmdline_invalid_tests[] = {
 		.name = "invalid_option",
 		.cmdline = "720x480,test=42",
 	},
+	{
+		.name = "invalid_tv_option",
+		.cmdline = "720x480i,tv_mode=invalid",
+	},
+	{
+		.name = "truncated_tv_option",
+		.cmdline = "720x480i,tv_mode=NTS",
+	},
 };
 
 static void drm_cmdline_invalid_desc(const struct drm_cmdline_invalid_test *t,
@@ -937,6 +945,64 @@ static void drm_cmdline_invalid_desc(const struct drm_cmdline_invalid_test *t,
 
 KUNIT_ARRAY_PARAM(drm_cmdline_invalid, drm_cmdline_invalid_tests, drm_cmdline_invalid_desc);
 
+struct drm_cmdline_tv_option_test {
+	const char *name;
+	const char *cmdline;
+	struct drm_display_mode *(*mode_fn)(struct drm_device *dev);
+	enum drm_connector_tv_mode tv_mode;
+};
+
+static void drm_test_cmdline_tv_options(struct kunit *test)
+{
+	const struct drm_cmdline_tv_option_test *params = test->param_value;
+	const struct drm_display_mode *expected_mode = params->mode_fn(NULL);
+	struct drm_cmdline_mode mode = { };
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_parse_command_line_for_connector(params->cmdline,
+									  &no_connector, &mode));
+	KUNIT_EXPECT_TRUE(test, mode.specified);
+	KUNIT_EXPECT_EQ(test, mode.xres, expected_mode->hdisplay);
+	KUNIT_EXPECT_EQ(test, mode.yres, expected_mode->vdisplay);
+	KUNIT_EXPECT_EQ(test, mode.tv_mode, params->tv_mode);
+
+	KUNIT_EXPECT_FALSE(test, mode.refresh_specified);
+
+	KUNIT_EXPECT_FALSE(test, mode.bpp_specified);
+
+	KUNIT_EXPECT_FALSE(test, mode.rb);
+	KUNIT_EXPECT_FALSE(test, mode.cvt);
+	KUNIT_EXPECT_EQ(test, mode.interlace, !!(expected_mode->flags & DRM_MODE_FLAG_INTERLACE));
+	KUNIT_EXPECT_FALSE(test, mode.margins);
+	KUNIT_EXPECT_EQ(test, mode.force, DRM_FORCE_UNSPECIFIED);
+}
+
+#define TV_OPT_TEST(_opt, _cmdline, _mode_fn)		\
+	{						\
+		.name = #_opt,				\
+		.cmdline = _cmdline,			\
+		.mode_fn = _mode_fn,			\
+		.tv_mode = DRM_MODE_TV_MODE_ ## _opt,	\
+	}
+
+static const struct drm_cmdline_tv_option_test drm_cmdline_tv_option_tests[] = {
+	TV_OPT_TEST(NTSC, "720x480i,tv_mode=NTSC", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(NTSC_443, "720x480i,tv_mode=NTSC-443", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(NTSC_J, "720x480i,tv_mode=NTSC-J", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(PAL, "720x576i,tv_mode=PAL", drm_mode_analog_pal_576i),
+	TV_OPT_TEST(PAL_M, "720x480i,tv_mode=PAL-M", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(PAL_N, "720x576i,tv_mode=PAL-N", drm_mode_analog_pal_576i),
+	TV_OPT_TEST(SECAM, "720x576i,tv_mode=SECAM", drm_mode_analog_pal_576i),
+};
+
+static void drm_cmdline_tv_option_desc(const struct drm_cmdline_tv_option_test *t,
+				       char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+KUNIT_ARRAY_PARAM(drm_cmdline_tv_option,
+		  drm_cmdline_tv_option_tests,
+		  drm_cmdline_tv_option_desc);
+
 static struct kunit_case drm_cmdline_parser_tests[] = {
 	KUNIT_CASE(drm_test_cmdline_force_d_only),
 	KUNIT_CASE(drm_test_cmdline_force_D_only_dvi),
@@ -977,6 +1043,7 @@ static struct kunit_case drm_cmdline_parser_tests[] = {
 	KUNIT_CASE(drm_test_cmdline_freestanding_force_e_and_options),
 	KUNIT_CASE(drm_test_cmdline_panel_orientation),
 	KUNIT_CASE_PARAM(drm_test_cmdline_invalid, drm_cmdline_invalid_gen_params),
+	KUNIT_CASE_PARAM(drm_test_cmdline_tv_options, drm_cmdline_tv_option_gen_params),
 	{}
 };
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index c856f4871697..ffca0a857d53 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1368,6 +1368,18 @@ struct drm_cmdline_mode {
 	 * @tv_margins: TV margins to apply to the mode.
 	 */
 	struct drm_connector_tv_margins tv_margins;
+
+	/**
+	 * @tv_mode: TV mode standard. See DRM_MODE_TV_MODE_*.
+	 */
+	enum drm_connector_tv_mode tv_mode;
+
+	/**
+	 * @tv_mode_specified:
+	 *
+	 * Did the mode have a preferred TV mode?
+	 */
+	bool tv_mode_specified;
 };
 
 /**

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 14/25] drm/modes: Introduce the tv_mode property as a command-line option

[Maxime Ripard]

Our new tv mode option allows to specify the TV mode from a property.
However, it can still be useful, for example to avoid any boot time
artifact, to set that property directly from the kernel command line.

Let's add some code to allow it, and some unit tests to exercise that code.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by

Changes in v6:
- Add a tv_mode_specified field

Changes in v4:
- Add Documentation of the command-line option to modedb.rst
---
 Documentation/fb/modedb.rst                     |  2 +
 drivers/gpu/drm/drm_modes.c                     | 37 ++++++++++++--
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c | 67 +++++++++++++++++++++++++
 include/drm/drm_connector.h                     | 12 +++++
 4 files changed, 115 insertions(+), 3 deletions(-)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index e53375033146..bebfe61caa77 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -70,6 +70,8 @@ Valid options are::
   - reflect_y (boolean): Perform an axial symmetry on the Y axis
   - rotate (integer): Rotate the initial framebuffer by x
     degrees. Valid values are 0, 90, 180 and 270.
+  - tv_mode: Analog TV mode. One of "NTSC", "NTSC-443", "NTSC-J", "PAL",
+    "PAL-M", "PAL-N", or "SECAM".
   - panel_orientation, one of "normal", "upside_down", "left_side_up", or
     "right_side_up". For KMS drivers only, this sets the "panel orientation"
     property on the kms connector as hint for kms users.
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index c826f9583a1d..dc037f7ceb37 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2133,6 +2133,30 @@ static int drm_mode_parse_panel_orientation(const char *delim,
 	return 0;
 }
 
+static int drm_mode_parse_tv_mode(const char *delim,
+				  struct drm_cmdline_mode *mode)
+{
+	const char *value;
+	int ret;
+
+	if (*delim != '=')
+		return -EINVAL;
+
+	value = delim + 1;
+	delim = strchr(value, ',');
+	if (!delim)
+		delim = value + strlen(value);
+
+	ret = drm_get_tv_mode_from_name(value, delim - value);
+	if (ret < 0)
+		return ret;
+
+	mode->tv_mode_specified = true;
+	mode->tv_mode = ret;
+
+	return 0;
+}
+
 static int drm_mode_parse_cmdline_options(const char *str,
 					  bool freestanding,
 					  const struct drm_connector *connector,
@@ -2202,6 +2226,9 @@ static int drm_mode_parse_cmdline_options(const char *str,
 		} else if (!strncmp(option, "panel_orientation", delim - option)) {
 			if (drm_mode_parse_panel_orientation(delim, mode))
 				return -EINVAL;
+		} else if (!strncmp(option, "tv_mode", delim - option)) {
+			if (drm_mode_parse_tv_mode(delim, mode))
+				return -EINVAL;
 		} else {
 			return -EINVAL;
 		}
@@ -2230,20 +2257,22 @@ struct drm_named_mode {
 	unsigned int xres;
 	unsigned int yres;
 	unsigned int flags;
+	unsigned int tv_mode;
 };
 
-#define NAMED_MODE(_name, _pclk, _x, _y, _flags)	\
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags, _mode)	\
 	{						\
 		.name = _name,				\
 		.pixel_clock_khz = _pclk,		\
 		.xres = _x,				\
 		.yres = _y,				\
 		.flags = _flags,			\
+		.tv_mode = _mode,			\
 	}
 
 static const struct drm_named_mode drm_named_modes[] = {
-	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
-	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC),
+	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2288,6 +2317,8 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 		cmdline_mode->xres = mode->xres;
 		cmdline_mode->yres = mode->yres;
 		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+		cmdline_mode->tv_mode = mode->tv_mode;
+		cmdline_mode->tv_mode_specified = true;
 		cmdline_mode->specified = true;
 
 		return 1;
diff --git a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
index 34790e7a3760..3e711b83b823 100644
--- a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
+++ b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
@@ -927,6 +927,14 @@ static const struct drm_cmdline_invalid_test drm_cmdline_invalid_tests[] = {
 		.name = "invalid_option",
 		.cmdline = "720x480,test=42",
 	},
+	{
+		.name = "invalid_tv_option",
+		.cmdline = "720x480i,tv_mode=invalid",
+	},
+	{
+		.name = "truncated_tv_option",
+		.cmdline = "720x480i,tv_mode=NTS",
+	},
 };
 
 static void drm_cmdline_invalid_desc(const struct drm_cmdline_invalid_test *t,
@@ -937,6 +945,64 @@ static void drm_cmdline_invalid_desc(const struct drm_cmdline_invalid_test *t,
 
 KUNIT_ARRAY_PARAM(drm_cmdline_invalid, drm_cmdline_invalid_tests, drm_cmdline_invalid_desc);
 
+struct drm_cmdline_tv_option_test {
+	const char *name;
+	const char *cmdline;
+	struct drm_display_mode *(*mode_fn)(struct drm_device *dev);
+	enum drm_connector_tv_mode tv_mode;
+};
+
+static void drm_test_cmdline_tv_options(struct kunit *test)
+{
+	const struct drm_cmdline_tv_option_test *params = test->param_value;
+	const struct drm_display_mode *expected_mode = params->mode_fn(NULL);
+	struct drm_cmdline_mode mode = { };
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_parse_command_line_for_connector(params->cmdline,
+									  &no_connector, &mode));
+	KUNIT_EXPECT_TRUE(test, mode.specified);
+	KUNIT_EXPECT_EQ(test, mode.xres, expected_mode->hdisplay);
+	KUNIT_EXPECT_EQ(test, mode.yres, expected_mode->vdisplay);
+	KUNIT_EXPECT_EQ(test, mode.tv_mode, params->tv_mode);
+
+	KUNIT_EXPECT_FALSE(test, mode.refresh_specified);
+
+	KUNIT_EXPECT_FALSE(test, mode.bpp_specified);
+
+	KUNIT_EXPECT_FALSE(test, mode.rb);
+	KUNIT_EXPECT_FALSE(test, mode.cvt);
+	KUNIT_EXPECT_EQ(test, mode.interlace, !!(expected_mode->flags & DRM_MODE_FLAG_INTERLACE));
+	KUNIT_EXPECT_FALSE(test, mode.margins);
+	KUNIT_EXPECT_EQ(test, mode.force, DRM_FORCE_UNSPECIFIED);
+}
+
+#define TV_OPT_TEST(_opt, _cmdline, _mode_fn)		\
+	{						\
+		.name = #_opt,				\
+		.cmdline = _cmdline,			\
+		.mode_fn = _mode_fn,			\
+		.tv_mode = DRM_MODE_TV_MODE_ ## _opt,	\
+	}
+
+static const struct drm_cmdline_tv_option_test drm_cmdline_tv_option_tests[] = {
+	TV_OPT_TEST(NTSC, "720x480i,tv_mode=NTSC", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(NTSC_443, "720x480i,tv_mode=NTSC-443", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(NTSC_J, "720x480i,tv_mode=NTSC-J", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(PAL, "720x576i,tv_mode=PAL", drm_mode_analog_pal_576i),
+	TV_OPT_TEST(PAL_M, "720x480i,tv_mode=PAL-M", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(PAL_N, "720x576i,tv_mode=PAL-N", drm_mode_analog_pal_576i),
+	TV_OPT_TEST(SECAM, "720x576i,tv_mode=SECAM", drm_mode_analog_pal_576i),
+};
+
+static void drm_cmdline_tv_option_desc(const struct drm_cmdline_tv_option_test *t,
+				       char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+KUNIT_ARRAY_PARAM(drm_cmdline_tv_option,
+		  drm_cmdline_tv_option_tests,
+		  drm_cmdline_tv_option_desc);
+
 static struct kunit_case drm_cmdline_parser_tests[] = {
 	KUNIT_CASE(drm_test_cmdline_force_d_only),
 	KUNIT_CASE(drm_test_cmdline_force_D_only_dvi),
@@ -977,6 +1043,7 @@ static struct kunit_case drm_cmdline_parser_tests[] = {
 	KUNIT_CASE(drm_test_cmdline_freestanding_force_e_and_options),
 	KUNIT_CASE(drm_test_cmdline_panel_orientation),
 	KUNIT_CASE_PARAM(drm_test_cmdline_invalid, drm_cmdline_invalid_gen_params),
+	KUNIT_CASE_PARAM(drm_test_cmdline_tv_options, drm_cmdline_tv_option_gen_params),
 	{}
 };
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index c856f4871697..ffca0a857d53 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1368,6 +1368,18 @@ struct drm_cmdline_mode {
 	 * @tv_margins: TV margins to apply to the mode.
 	 */
 	struct drm_connector_tv_margins tv_margins;
+
+	/**
+	 * @tv_mode: TV mode standard. See DRM_MODE_TV_MODE_*.
+	 */
+	enum drm_connector_tv_mode tv_mode;
+
+	/**
+	 * @tv_mode_specified:
+	 *
+	 * Did the mode have a preferred TV mode?
+	 */
+	bool tv_mode_specified;
 };
 
 /**

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 14/25] drm/modes: Introduce the tv_mode property as a command-line option

[Maxime Ripard]

Our new tv mode option allows to specify the TV mode from a property.
However, it can still be useful, for example to avoid any boot time
artifact, to set that property directly from the kernel command line.

Let's add some code to allow it, and some unit tests to exercise that code.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Add Noralf Reviewed-by

Changes in v6:
- Add a tv_mode_specified field

Changes in v4:
- Add Documentation of the command-line option to modedb.rst
---
 Documentation/fb/modedb.rst                     |  2 +
 drivers/gpu/drm/drm_modes.c                     | 37 ++++++++++++--
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c | 67 +++++++++++++++++++++++++
 include/drm/drm_connector.h                     | 12 +++++
 4 files changed, 115 insertions(+), 3 deletions(-)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index e53375033146..bebfe61caa77 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -70,6 +70,8 @@ Valid options are::
   - reflect_y (boolean): Perform an axial symmetry on the Y axis
   - rotate (integer): Rotate the initial framebuffer by x
     degrees. Valid values are 0, 90, 180 and 270.
+  - tv_mode: Analog TV mode. One of "NTSC", "NTSC-443", "NTSC-J", "PAL",
+    "PAL-M", "PAL-N", or "SECAM".
   - panel_orientation, one of "normal", "upside_down", "left_side_up", or
     "right_side_up". For KMS drivers only, this sets the "panel orientation"
     property on the kms connector as hint for kms users.
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index c826f9583a1d..dc037f7ceb37 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2133,6 +2133,30 @@ static int drm_mode_parse_panel_orientation(const char *delim,
 	return 0;
 }
 
+static int drm_mode_parse_tv_mode(const char *delim,
+				  struct drm_cmdline_mode *mode)
+{
+	const char *value;
+	int ret;
+
+	if (*delim != '=')
+		return -EINVAL;
+
+	value = delim + 1;
+	delim = strchr(value, ',');
+	if (!delim)
+		delim = value + strlen(value);
+
+	ret = drm_get_tv_mode_from_name(value, delim - value);
+	if (ret < 0)
+		return ret;
+
+	mode->tv_mode_specified = true;
+	mode->tv_mode = ret;
+
+	return 0;
+}
+
 static int drm_mode_parse_cmdline_options(const char *str,
 					  bool freestanding,
 					  const struct drm_connector *connector,
@@ -2202,6 +2226,9 @@ static int drm_mode_parse_cmdline_options(const char *str,
 		} else if (!strncmp(option, "panel_orientation", delim - option)) {
 			if (drm_mode_parse_panel_orientation(delim, mode))
 				return -EINVAL;
+		} else if (!strncmp(option, "tv_mode", delim - option)) {
+			if (drm_mode_parse_tv_mode(delim, mode))
+				return -EINVAL;
 		} else {
 			return -EINVAL;
 		}
@@ -2230,20 +2257,22 @@ struct drm_named_mode {
 	unsigned int xres;
 	unsigned int yres;
 	unsigned int flags;
+	unsigned int tv_mode;
 };
 
-#define NAMED_MODE(_name, _pclk, _x, _y, _flags)	\
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags, _mode)	\
 	{						\
 		.name = _name,				\
 		.pixel_clock_khz = _pclk,		\
 		.xres = _x,				\
 		.yres = _y,				\
 		.flags = _flags,			\
+		.tv_mode = _mode,			\
 	}
 
 static const struct drm_named_mode drm_named_modes[] = {
-	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
-	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
+	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC),
+	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2288,6 +2317,8 @@ static int drm_mode_parse_cmdline_named_mode(const char *name,
 		cmdline_mode->xres = mode->xres;
 		cmdline_mode->yres = mode->yres;
 		cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+		cmdline_mode->tv_mode = mode->tv_mode;
+		cmdline_mode->tv_mode_specified = true;
 		cmdline_mode->specified = true;
 
 		return 1;
diff --git a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
index 34790e7a3760..3e711b83b823 100644
--- a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
+++ b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
@@ -927,6 +927,14 @@ static const struct drm_cmdline_invalid_test drm_cmdline_invalid_tests[] = {
 		.name = "invalid_option",
 		.cmdline = "720x480,test=42",
 	},
+	{
+		.name = "invalid_tv_option",
+		.cmdline = "720x480i,tv_mode=invalid",
+	},
+	{
+		.name = "truncated_tv_option",
+		.cmdline = "720x480i,tv_mode=NTS",
+	},
 };
 
 static void drm_cmdline_invalid_desc(const struct drm_cmdline_invalid_test *t,
@@ -937,6 +945,64 @@ static void drm_cmdline_invalid_desc(const struct drm_cmdline_invalid_test *t,
 
 KUNIT_ARRAY_PARAM(drm_cmdline_invalid, drm_cmdline_invalid_tests, drm_cmdline_invalid_desc);
 
+struct drm_cmdline_tv_option_test {
+	const char *name;
+	const char *cmdline;
+	struct drm_display_mode *(*mode_fn)(struct drm_device *dev);
+	enum drm_connector_tv_mode tv_mode;
+};
+
+static void drm_test_cmdline_tv_options(struct kunit *test)
+{
+	const struct drm_cmdline_tv_option_test *params = test->param_value;
+	const struct drm_display_mode *expected_mode = params->mode_fn(NULL);
+	struct drm_cmdline_mode mode = { };
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_parse_command_line_for_connector(params->cmdline,
+									  &no_connector, &mode));
+	KUNIT_EXPECT_TRUE(test, mode.specified);
+	KUNIT_EXPECT_EQ(test, mode.xres, expected_mode->hdisplay);
+	KUNIT_EXPECT_EQ(test, mode.yres, expected_mode->vdisplay);
+	KUNIT_EXPECT_EQ(test, mode.tv_mode, params->tv_mode);
+
+	KUNIT_EXPECT_FALSE(test, mode.refresh_specified);
+
+	KUNIT_EXPECT_FALSE(test, mode.bpp_specified);
+
+	KUNIT_EXPECT_FALSE(test, mode.rb);
+	KUNIT_EXPECT_FALSE(test, mode.cvt);
+	KUNIT_EXPECT_EQ(test, mode.interlace, !!(expected_mode->flags & DRM_MODE_FLAG_INTERLACE));
+	KUNIT_EXPECT_FALSE(test, mode.margins);
+	KUNIT_EXPECT_EQ(test, mode.force, DRM_FORCE_UNSPECIFIED);
+}
+
+#define TV_OPT_TEST(_opt, _cmdline, _mode_fn)		\
+	{						\
+		.name = #_opt,				\
+		.cmdline = _cmdline,			\
+		.mode_fn = _mode_fn,			\
+		.tv_mode = DRM_MODE_TV_MODE_ ## _opt,	\
+	}
+
+static const struct drm_cmdline_tv_option_test drm_cmdline_tv_option_tests[] = {
+	TV_OPT_TEST(NTSC, "720x480i,tv_mode=NTSC", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(NTSC_443, "720x480i,tv_mode=NTSC-443", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(NTSC_J, "720x480i,tv_mode=NTSC-J", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(PAL, "720x576i,tv_mode=PAL", drm_mode_analog_pal_576i),
+	TV_OPT_TEST(PAL_M, "720x480i,tv_mode=PAL-M", drm_mode_analog_ntsc_480i),
+	TV_OPT_TEST(PAL_N, "720x576i,tv_mode=PAL-N", drm_mode_analog_pal_576i),
+	TV_OPT_TEST(SECAM, "720x576i,tv_mode=SECAM", drm_mode_analog_pal_576i),
+};
+
+static void drm_cmdline_tv_option_desc(const struct drm_cmdline_tv_option_test *t,
+				       char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+KUNIT_ARRAY_PARAM(drm_cmdline_tv_option,
+		  drm_cmdline_tv_option_tests,
+		  drm_cmdline_tv_option_desc);
+
 static struct kunit_case drm_cmdline_parser_tests[] = {
 	KUNIT_CASE(drm_test_cmdline_force_d_only),
 	KUNIT_CASE(drm_test_cmdline_force_D_only_dvi),
@@ -977,6 +1043,7 @@ static struct kunit_case drm_cmdline_parser_tests[] = {
 	KUNIT_CASE(drm_test_cmdline_freestanding_force_e_and_options),
 	KUNIT_CASE(drm_test_cmdline_panel_orientation),
 	KUNIT_CASE_PARAM(drm_test_cmdline_invalid, drm_cmdline_invalid_gen_params),
+	KUNIT_CASE_PARAM(drm_test_cmdline_tv_options, drm_cmdline_tv_option_gen_params),
 	{}
 };
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index c856f4871697..ffca0a857d53 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1368,6 +1368,18 @@ struct drm_cmdline_mode {
 	 * @tv_margins: TV margins to apply to the mode.
 	 */
 	struct drm_connector_tv_margins tv_margins;
+
+	/**
+	 * @tv_mode: TV mode standard. See DRM_MODE_TV_MODE_*.
+	 */
+	enum drm_connector_tv_mode tv_mode;
+
+	/**
+	 * @tv_mode_specified:
+	 *
+	 * Did the mode have a preferred TV mode?
+	 */
+	bool tv_mode_specified;
 };
 
 /**

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 15/25] drm/modes: Properly generate a drm_display_mode from a named mode

[Maxime Ripard]

The framework will get the drm_display_mode from the drm_cmdline_mode it
got by parsing the video command line argument by calling
drm_connector_pick_cmdline_mode().

The heavy lifting will then be done by the drm_mode_create_from_cmdline_mode()
function.

In the case of the named modes though, there's no real code to make that
translation and we rely on the drivers to guess which actual display mode
we meant.

Let's modify drm_mode_create_from_cmdline_mode() to properly generate the
drm_display_mode we mean when passing a named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Switch to parameterized tests for named modes

Changes in v8:
- Return the result of drm_analog_tv_mode directly

Changes in v7:
- Use tv_mode_specified in drm_mode_parse_command_line_for_connector

Changes in v6:
- Fix get_modes to return 0 instead of an error code
- Rename the tests to follow the DRM test naming convention

Changes in v5:
- Switched to KUNIT_ASSERT_NOT_NULL
---
 drivers/gpu/drm/drm_modes.c                     | 29 ++++++++-
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 83 ++++++++++++++++++++++++-
 2 files changed, 110 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index dc037f7ceb37..d3f0a3559812 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2497,6 +2497,31 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 }
 EXPORT_SYMBOL(drm_mode_parse_command_line_for_connector);
 
+static struct drm_display_mode *drm_named_mode(struct drm_device *dev,
+					       struct drm_cmdline_mode *cmd)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+		const struct drm_named_mode *named_mode = &drm_named_modes[i];
+
+		if (strcmp(cmd->name, named_mode->name))
+			continue;
+
+		if (!cmd->tv_mode_specified)
+			continue;
+
+		return drm_analog_tv_mode(dev,
+					  named_mode->tv_mode,
+					  named_mode->pixel_clock_khz * 1000,
+					  named_mode->xres,
+					  named_mode->yres,
+					  named_mode->flags & DRM_MODE_FLAG_INTERLACE);
+	}
+
+	return NULL;
+}
+
 /**
  * drm_mode_create_from_cmdline_mode - convert a command line modeline into a DRM display mode
  * @dev: DRM device to create the new mode for
@@ -2514,7 +2539,9 @@ drm_mode_create_from_cmdline_mode(struct drm_device *dev,
 	if (cmd->xres == 0 || cmd->yres == 0)
 		return NULL;
 
-	if (cmd->cvt)
+	if (strlen(cmd->name))
+		mode = drm_named_mode(dev, cmd);
+	else if (cmd->cvt)
 		mode = drm_cvt_mode(dev,
 				    cmd->xres, cmd->yres,
 				    cmd->refresh_specified ? cmd->refresh : 60,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 558c098b0384..497434cc56cd 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -21,7 +21,26 @@ struct drm_client_modeset_test_priv {
 
 static int drm_client_modeset_connector_get_modes(struct drm_connector *connector)
 {
-	return drm_add_modes_noedid(connector, 1920, 1200);
+	struct drm_display_mode *mode;
+	int count;
+
+	count = drm_add_modes_noedid(connector, 1920, 1200);
+
+	mode = drm_mode_analog_ntsc_480i(connector->dev);
+	if (!mode)
+		return count;
+
+	drm_mode_probed_add(connector, mode);
+	count += 1;
+
+	mode = drm_mode_analog_pal_576i(connector->dev);
+	if (!mode)
+		return count;
+
+	drm_mode_probed_add(connector, mode);
+	count += 1;
+
+	return count;
 }
 
 static const struct drm_connector_helper_funcs drm_client_modeset_connector_helper_funcs = {
@@ -52,6 +71,9 @@ static int drm_client_modeset_test_init(struct kunit *test)
 
 	drm_connector_helper_add(&priv->connector, &drm_client_modeset_connector_helper_funcs);
 
+	priv->connector.interlace_allowed = true;
+	priv->connector.doublescan_allowed = true;
+
 	return 0;
 
 }
@@ -85,9 +107,68 @@ static void drm_test_pick_cmdline_res_1920_1080_60(struct kunit *test)
 	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
 }
 
+struct drm_connector_pick_cmdline_mode_test {
+	const char *cmdline;
+	struct drm_display_mode *(*func)(struct drm_device *);
+};
+
+#define TEST_CMDLINE(_cmdline, _fn)		\
+	{					\
+		.cmdline = _cmdline,		\
+		.func = _fn,			\
+	}
+
+static void drm_test_pick_cmdline_named(struct kunit *test)
+{
+	const struct drm_connector_pick_cmdline_mode_test *params = test->param_value;
+	struct drm_client_modeset_test_priv *priv = test->priv;
+	struct drm_device *drm = priv->drm;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+	const struct drm_display_mode *expected_mode, *mode;
+	const char *cmdline = params->cmdline;
+	int ret;
+
+	KUNIT_ASSERT_TRUE(test,
+			  drm_mode_parse_command_line_for_connector(cmdline,
+								    connector,
+								    cmdline_mode));
+
+	mutex_lock(&drm->mode_config.mutex);
+	ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+	mutex_unlock(&drm->mode_config.mutex);
+	KUNIT_ASSERT_GT(test, ret, 0);
+
+	mode = drm_connector_pick_cmdline_mode(connector);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	expected_mode = params->func(drm);
+	KUNIT_ASSERT_NOT_NULL(test, expected_mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
+}
+
+static const
+struct drm_connector_pick_cmdline_mode_test drm_connector_pick_cmdline_mode_tests[] = {
+	TEST_CMDLINE("NTSC", drm_mode_analog_ntsc_480i),
+	TEST_CMDLINE("PAL", drm_mode_analog_pal_576i),
+};
+
+static void
+drm_connector_pick_cmdline_mode_desc(const struct drm_connector_pick_cmdline_mode_test *t,
+				     char *desc)
+{
+	sprintf(desc, "%s", t->cmdline);
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_pick_cmdline_mode,
+		  drm_connector_pick_cmdline_mode_tests,
+		  drm_connector_pick_cmdline_mode_desc);
 
 static struct kunit_case drm_test_pick_cmdline_tests[] = {
 	KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
+	KUNIT_CASE_PARAM(drm_test_pick_cmdline_named,
+			 drm_connector_pick_cmdline_mode_gen_params),
 	{}
 };
 

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 15/25] drm/modes: Properly generate a drm_display_mode from a named mode

[Maxime Ripard]

The framework will get the drm_display_mode from the drm_cmdline_mode it
got by parsing the video command line argument by calling
drm_connector_pick_cmdline_mode().

The heavy lifting will then be done by the drm_mode_create_from_cmdline_mode()
function.

In the case of the named modes though, there's no real code to make that
translation and we rely on the drivers to guess which actual display mode
we meant.

Let's modify drm_mode_create_from_cmdline_mode() to properly generate the
drm_display_mode we mean when passing a named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Switch to parameterized tests for named modes

Changes in v8:
- Return the result of drm_analog_tv_mode directly

Changes in v7:
- Use tv_mode_specified in drm_mode_parse_command_line_for_connector

Changes in v6:
- Fix get_modes to return 0 instead of an error code
- Rename the tests to follow the DRM test naming convention

Changes in v5:
- Switched to KUNIT_ASSERT_NOT_NULL
---
 drivers/gpu/drm/drm_modes.c                     | 29 ++++++++-
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 83 ++++++++++++++++++++++++-
 2 files changed, 110 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index dc037f7ceb37..d3f0a3559812 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2497,6 +2497,31 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 }
 EXPORT_SYMBOL(drm_mode_parse_command_line_for_connector);
 
+static struct drm_display_mode *drm_named_mode(struct drm_device *dev,
+					       struct drm_cmdline_mode *cmd)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+		const struct drm_named_mode *named_mode = &drm_named_modes[i];
+
+		if (strcmp(cmd->name, named_mode->name))
+			continue;
+
+		if (!cmd->tv_mode_specified)
+			continue;
+
+		return drm_analog_tv_mode(dev,
+					  named_mode->tv_mode,
+					  named_mode->pixel_clock_khz * 1000,
+					  named_mode->xres,
+					  named_mode->yres,
+					  named_mode->flags & DRM_MODE_FLAG_INTERLACE);
+	}
+
+	return NULL;
+}
+
 /**
  * drm_mode_create_from_cmdline_mode - convert a command line modeline into a DRM display mode
  * @dev: DRM device to create the new mode for
@@ -2514,7 +2539,9 @@ drm_mode_create_from_cmdline_mode(struct drm_device *dev,
 	if (cmd->xres == 0 || cmd->yres == 0)
 		return NULL;
 
-	if (cmd->cvt)
+	if (strlen(cmd->name))
+		mode = drm_named_mode(dev, cmd);
+	else if (cmd->cvt)
 		mode = drm_cvt_mode(dev,
 				    cmd->xres, cmd->yres,
 				    cmd->refresh_specified ? cmd->refresh : 60,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 558c098b0384..497434cc56cd 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -21,7 +21,26 @@ struct drm_client_modeset_test_priv {
 
 static int drm_client_modeset_connector_get_modes(struct drm_connector *connector)
 {
-	return drm_add_modes_noedid(connector, 1920, 1200);
+	struct drm_display_mode *mode;
+	int count;
+
+	count = drm_add_modes_noedid(connector, 1920, 1200);
+
+	mode = drm_mode_analog_ntsc_480i(connector->dev);
+	if (!mode)
+		return count;
+
+	drm_mode_probed_add(connector, mode);
+	count += 1;
+
+	mode = drm_mode_analog_pal_576i(connector->dev);
+	if (!mode)
+		return count;
+
+	drm_mode_probed_add(connector, mode);
+	count += 1;
+
+	return count;
 }
 
 static const struct drm_connector_helper_funcs drm_client_modeset_connector_helper_funcs = {
@@ -52,6 +71,9 @@ static int drm_client_modeset_test_init(struct kunit *test)
 
 	drm_connector_helper_add(&priv->connector, &drm_client_modeset_connector_helper_funcs);
 
+	priv->connector.interlace_allowed = true;
+	priv->connector.doublescan_allowed = true;
+
 	return 0;
 
 }
@@ -85,9 +107,68 @@ static void drm_test_pick_cmdline_res_1920_1080_60(struct kunit *test)
 	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
 }
 
+struct drm_connector_pick_cmdline_mode_test {
+	const char *cmdline;
+	struct drm_display_mode *(*func)(struct drm_device *);
+};
+
+#define TEST_CMDLINE(_cmdline, _fn)		\
+	{					\
+		.cmdline = _cmdline,		\
+		.func = _fn,			\
+	}
+
+static void drm_test_pick_cmdline_named(struct kunit *test)
+{
+	const struct drm_connector_pick_cmdline_mode_test *params = test->param_value;
+	struct drm_client_modeset_test_priv *priv = test->priv;
+	struct drm_device *drm = priv->drm;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+	const struct drm_display_mode *expected_mode, *mode;
+	const char *cmdline = params->cmdline;
+	int ret;
+
+	KUNIT_ASSERT_TRUE(test,
+			  drm_mode_parse_command_line_for_connector(cmdline,
+								    connector,
+								    cmdline_mode));
+
+	mutex_lock(&drm->mode_config.mutex);
+	ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+	mutex_unlock(&drm->mode_config.mutex);
+	KUNIT_ASSERT_GT(test, ret, 0);
+
+	mode = drm_connector_pick_cmdline_mode(connector);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	expected_mode = params->func(drm);
+	KUNIT_ASSERT_NOT_NULL(test, expected_mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
+}
+
+static const
+struct drm_connector_pick_cmdline_mode_test drm_connector_pick_cmdline_mode_tests[] = {
+	TEST_CMDLINE("NTSC", drm_mode_analog_ntsc_480i),
+	TEST_CMDLINE("PAL", drm_mode_analog_pal_576i),
+};
+
+static void
+drm_connector_pick_cmdline_mode_desc(const struct drm_connector_pick_cmdline_mode_test *t,
+				     char *desc)
+{
+	sprintf(desc, "%s", t->cmdline);
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_pick_cmdline_mode,
+		  drm_connector_pick_cmdline_mode_tests,
+		  drm_connector_pick_cmdline_mode_desc);
 
 static struct kunit_case drm_test_pick_cmdline_tests[] = {
 	KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
+	KUNIT_CASE_PARAM(drm_test_pick_cmdline_named,
+			 drm_connector_pick_cmdline_mode_gen_params),
 	{}
 };
 

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 15/25] drm/modes: Properly generate a drm_display_mode from a named mode

[Maxime Ripard]

The framework will get the drm_display_mode from the drm_cmdline_mode it
got by parsing the video command line argument by calling
drm_connector_pick_cmdline_mode().

The heavy lifting will then be done by the drm_mode_create_from_cmdline_mode()
function.

In the case of the named modes though, there's no real code to make that
translation and we rely on the drivers to guess which actual display mode
we meant.

Let's modify drm_mode_create_from_cmdline_mode() to properly generate the
drm_display_mode we mean when passing a named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Switch to parameterized tests for named modes

Changes in v8:
- Return the result of drm_analog_tv_mode directly

Changes in v7:
- Use tv_mode_specified in drm_mode_parse_command_line_for_connector

Changes in v6:
- Fix get_modes to return 0 instead of an error code
- Rename the tests to follow the DRM test naming convention

Changes in v5:
- Switched to KUNIT_ASSERT_NOT_NULL
---
 drivers/gpu/drm/drm_modes.c                     | 29 ++++++++-
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 83 ++++++++++++++++++++++++-
 2 files changed, 110 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index dc037f7ceb37..d3f0a3559812 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2497,6 +2497,31 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 }
 EXPORT_SYMBOL(drm_mode_parse_command_line_for_connector);
 
+static struct drm_display_mode *drm_named_mode(struct drm_device *dev,
+					       struct drm_cmdline_mode *cmd)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+		const struct drm_named_mode *named_mode = &drm_named_modes[i];
+
+		if (strcmp(cmd->name, named_mode->name))
+			continue;
+
+		if (!cmd->tv_mode_specified)
+			continue;
+
+		return drm_analog_tv_mode(dev,
+					  named_mode->tv_mode,
+					  named_mode->pixel_clock_khz * 1000,
+					  named_mode->xres,
+					  named_mode->yres,
+					  named_mode->flags & DRM_MODE_FLAG_INTERLACE);
+	}
+
+	return NULL;
+}
+
 /**
  * drm_mode_create_from_cmdline_mode - convert a command line modeline into a DRM display mode
  * @dev: DRM device to create the new mode for
@@ -2514,7 +2539,9 @@ drm_mode_create_from_cmdline_mode(struct drm_device *dev,
 	if (cmd->xres == 0 || cmd->yres == 0)
 		return NULL;
 
-	if (cmd->cvt)
+	if (strlen(cmd->name))
+		mode = drm_named_mode(dev, cmd);
+	else if (cmd->cvt)
 		mode = drm_cvt_mode(dev,
 				    cmd->xres, cmd->yres,
 				    cmd->refresh_specified ? cmd->refresh : 60,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 558c098b0384..497434cc56cd 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -21,7 +21,26 @@ struct drm_client_modeset_test_priv {
 
 static int drm_client_modeset_connector_get_modes(struct drm_connector *connector)
 {
-	return drm_add_modes_noedid(connector, 1920, 1200);
+	struct drm_display_mode *mode;
+	int count;
+
+	count = drm_add_modes_noedid(connector, 1920, 1200);
+
+	mode = drm_mode_analog_ntsc_480i(connector->dev);
+	if (!mode)
+		return count;
+
+	drm_mode_probed_add(connector, mode);
+	count += 1;
+
+	mode = drm_mode_analog_pal_576i(connector->dev);
+	if (!mode)
+		return count;
+
+	drm_mode_probed_add(connector, mode);
+	count += 1;
+
+	return count;
 }
 
 static const struct drm_connector_helper_funcs drm_client_modeset_connector_helper_funcs = {
@@ -52,6 +71,9 @@ static int drm_client_modeset_test_init(struct kunit *test)
 
 	drm_connector_helper_add(&priv->connector, &drm_client_modeset_connector_helper_funcs);
 
+	priv->connector.interlace_allowed = true;
+	priv->connector.doublescan_allowed = true;
+
 	return 0;
 
 }
@@ -85,9 +107,68 @@ static void drm_test_pick_cmdline_res_1920_1080_60(struct kunit *test)
 	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
 }
 
+struct drm_connector_pick_cmdline_mode_test {
+	const char *cmdline;
+	struct drm_display_mode *(*func)(struct drm_device *);
+};
+
+#define TEST_CMDLINE(_cmdline, _fn)		\
+	{					\
+		.cmdline = _cmdline,		\
+		.func = _fn,			\
+	}
+
+static void drm_test_pick_cmdline_named(struct kunit *test)
+{
+	const struct drm_connector_pick_cmdline_mode_test *params = test->param_value;
+	struct drm_client_modeset_test_priv *priv = test->priv;
+	struct drm_device *drm = priv->drm;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+	const struct drm_display_mode *expected_mode, *mode;
+	const char *cmdline = params->cmdline;
+	int ret;
+
+	KUNIT_ASSERT_TRUE(test,
+			  drm_mode_parse_command_line_for_connector(cmdline,
+								    connector,
+								    cmdline_mode));
+
+	mutex_lock(&drm->mode_config.mutex);
+	ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+	mutex_unlock(&drm->mode_config.mutex);
+	KUNIT_ASSERT_GT(test, ret, 0);
+
+	mode = drm_connector_pick_cmdline_mode(connector);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	expected_mode = params->func(drm);
+	KUNIT_ASSERT_NOT_NULL(test, expected_mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
+}
+
+static const
+struct drm_connector_pick_cmdline_mode_test drm_connector_pick_cmdline_mode_tests[] = {
+	TEST_CMDLINE("NTSC", drm_mode_analog_ntsc_480i),
+	TEST_CMDLINE("PAL", drm_mode_analog_pal_576i),
+};
+
+static void
+drm_connector_pick_cmdline_mode_desc(const struct drm_connector_pick_cmdline_mode_test *t,
+				     char *desc)
+{
+	sprintf(desc, "%s", t->cmdline);
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_pick_cmdline_mode,
+		  drm_connector_pick_cmdline_mode_tests,
+		  drm_connector_pick_cmdline_mode_desc);
 
 static struct kunit_case drm_test_pick_cmdline_tests[] = {
 	KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
+	KUNIT_CASE_PARAM(drm_test_pick_cmdline_named,
+			 drm_connector_pick_cmdline_mode_gen_params),
 	{}
 };
 

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 15/25] drm/modes: Properly generate a drm_display_mode from a named mode

[Maxime Ripard]

The framework will get the drm_display_mode from the drm_cmdline_mode it
got by parsing the video command line argument by calling
drm_connector_pick_cmdline_mode().

The heavy lifting will then be done by the drm_mode_create_from_cmdline_mode()
function.

In the case of the named modes though, there's no real code to make that
translation and we rely on the drivers to guess which actual display mode
we meant.

Let's modify drm_mode_create_from_cmdline_mode() to properly generate the
drm_display_mode we mean when passing a named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Switch to parameterized tests for named modes

Changes in v8:
- Return the result of drm_analog_tv_mode directly

Changes in v7:
- Use tv_mode_specified in drm_mode_parse_command_line_for_connector

Changes in v6:
- Fix get_modes to return 0 instead of an error code
- Rename the tests to follow the DRM test naming convention

Changes in v5:
- Switched to KUNIT_ASSERT_NOT_NULL
---
 drivers/gpu/drm/drm_modes.c                     | 29 ++++++++-
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 83 ++++++++++++++++++++++++-
 2 files changed, 110 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index dc037f7ceb37..d3f0a3559812 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2497,6 +2497,31 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 }
 EXPORT_SYMBOL(drm_mode_parse_command_line_for_connector);
 
+static struct drm_display_mode *drm_named_mode(struct drm_device *dev,
+					       struct drm_cmdline_mode *cmd)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+		const struct drm_named_mode *named_mode = &drm_named_modes[i];
+
+		if (strcmp(cmd->name, named_mode->name))
+			continue;
+
+		if (!cmd->tv_mode_specified)
+			continue;
+
+		return drm_analog_tv_mode(dev,
+					  named_mode->tv_mode,
+					  named_mode->pixel_clock_khz * 1000,
+					  named_mode->xres,
+					  named_mode->yres,
+					  named_mode->flags & DRM_MODE_FLAG_INTERLACE);
+	}
+
+	return NULL;
+}
+
 /**
  * drm_mode_create_from_cmdline_mode - convert a command line modeline into a DRM display mode
  * @dev: DRM device to create the new mode for
@@ -2514,7 +2539,9 @@ drm_mode_create_from_cmdline_mode(struct drm_device *dev,
 	if (cmd->xres == 0 || cmd->yres == 0)
 		return NULL;
 
-	if (cmd->cvt)
+	if (strlen(cmd->name))
+		mode = drm_named_mode(dev, cmd);
+	else if (cmd->cvt)
 		mode = drm_cvt_mode(dev,
 				    cmd->xres, cmd->yres,
 				    cmd->refresh_specified ? cmd->refresh : 60,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 558c098b0384..497434cc56cd 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -21,7 +21,26 @@ struct drm_client_modeset_test_priv {
 
 static int drm_client_modeset_connector_get_modes(struct drm_connector *connector)
 {
-	return drm_add_modes_noedid(connector, 1920, 1200);
+	struct drm_display_mode *mode;
+	int count;
+
+	count = drm_add_modes_noedid(connector, 1920, 1200);
+
+	mode = drm_mode_analog_ntsc_480i(connector->dev);
+	if (!mode)
+		return count;
+
+	drm_mode_probed_add(connector, mode);
+	count += 1;
+
+	mode = drm_mode_analog_pal_576i(connector->dev);
+	if (!mode)
+		return count;
+
+	drm_mode_probed_add(connector, mode);
+	count += 1;
+
+	return count;
 }
 
 static const struct drm_connector_helper_funcs drm_client_modeset_connector_helper_funcs = {
@@ -52,6 +71,9 @@ static int drm_client_modeset_test_init(struct kunit *test)
 
 	drm_connector_helper_add(&priv->connector, &drm_client_modeset_connector_helper_funcs);
 
+	priv->connector.interlace_allowed = true;
+	priv->connector.doublescan_allowed = true;
+
 	return 0;
 
 }
@@ -85,9 +107,68 @@ static void drm_test_pick_cmdline_res_1920_1080_60(struct kunit *test)
 	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
 }
 
+struct drm_connector_pick_cmdline_mode_test {
+	const char *cmdline;
+	struct drm_display_mode *(*func)(struct drm_device *);
+};
+
+#define TEST_CMDLINE(_cmdline, _fn)		\
+	{					\
+		.cmdline = _cmdline,		\
+		.func = _fn,			\
+	}
+
+static void drm_test_pick_cmdline_named(struct kunit *test)
+{
+	const struct drm_connector_pick_cmdline_mode_test *params = test->param_value;
+	struct drm_client_modeset_test_priv *priv = test->priv;
+	struct drm_device *drm = priv->drm;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+	const struct drm_display_mode *expected_mode, *mode;
+	const char *cmdline = params->cmdline;
+	int ret;
+
+	KUNIT_ASSERT_TRUE(test,
+			  drm_mode_parse_command_line_for_connector(cmdline,
+								    connector,
+								    cmdline_mode));
+
+	mutex_lock(&drm->mode_config.mutex);
+	ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+	mutex_unlock(&drm->mode_config.mutex);
+	KUNIT_ASSERT_GT(test, ret, 0);
+
+	mode = drm_connector_pick_cmdline_mode(connector);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	expected_mode = params->func(drm);
+	KUNIT_ASSERT_NOT_NULL(test, expected_mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
+}
+
+static const
+struct drm_connector_pick_cmdline_mode_test drm_connector_pick_cmdline_mode_tests[] = {
+	TEST_CMDLINE("NTSC", drm_mode_analog_ntsc_480i),
+	TEST_CMDLINE("PAL", drm_mode_analog_pal_576i),
+};
+
+static void
+drm_connector_pick_cmdline_mode_desc(const struct drm_connector_pick_cmdline_mode_test *t,
+				     char *desc)
+{
+	sprintf(desc, "%s", t->cmdline);
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_pick_cmdline_mode,
+		  drm_connector_pick_cmdline_mode_tests,
+		  drm_connector_pick_cmdline_mode_desc);
 
 static struct kunit_case drm_test_pick_cmdline_tests[] = {
 	KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
+	KUNIT_CASE_PARAM(drm_test_pick_cmdline_named,
+			 drm_connector_pick_cmdline_mode_gen_params),
 	{}
 };
 

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 15/25] drm/modes: Properly generate a drm_display_mode from a named mode

[Maxime Ripard]

The framework will get the drm_display_mode from the drm_cmdline_mode it
got by parsing the video command line argument by calling
drm_connector_pick_cmdline_mode().

The heavy lifting will then be done by the drm_mode_create_from_cmdline_mode()
function.

In the case of the named modes though, there's no real code to make that
translation and we rely on the drivers to guess which actual display mode
we meant.

Let's modify drm_mode_create_from_cmdline_mode() to properly generate the
drm_display_mode we mean when passing a named mode.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Switch to parameterized tests for named modes

Changes in v8:
- Return the result of drm_analog_tv_mode directly

Changes in v7:
- Use tv_mode_specified in drm_mode_parse_command_line_for_connector

Changes in v6:
- Fix get_modes to return 0 instead of an error code
- Rename the tests to follow the DRM test naming convention

Changes in v5:
- Switched to KUNIT_ASSERT_NOT_NULL
---
 drivers/gpu/drm/drm_modes.c                     | 29 ++++++++-
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 83 ++++++++++++++++++++++++-
 2 files changed, 110 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index dc037f7ceb37..d3f0a3559812 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2497,6 +2497,31 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 }
 EXPORT_SYMBOL(drm_mode_parse_command_line_for_connector);
 
+static struct drm_display_mode *drm_named_mode(struct drm_device *dev,
+					       struct drm_cmdline_mode *cmd)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+		const struct drm_named_mode *named_mode = &drm_named_modes[i];
+
+		if (strcmp(cmd->name, named_mode->name))
+			continue;
+
+		if (!cmd->tv_mode_specified)
+			continue;
+
+		return drm_analog_tv_mode(dev,
+					  named_mode->tv_mode,
+					  named_mode->pixel_clock_khz * 1000,
+					  named_mode->xres,
+					  named_mode->yres,
+					  named_mode->flags & DRM_MODE_FLAG_INTERLACE);
+	}
+
+	return NULL;
+}
+
 /**
  * drm_mode_create_from_cmdline_mode - convert a command line modeline into a DRM display mode
  * @dev: DRM device to create the new mode for
@@ -2514,7 +2539,9 @@ drm_mode_create_from_cmdline_mode(struct drm_device *dev,
 	if (cmd->xres == 0 || cmd->yres == 0)
 		return NULL;
 
-	if (cmd->cvt)
+	if (strlen(cmd->name))
+		mode = drm_named_mode(dev, cmd);
+	else if (cmd->cvt)
 		mode = drm_cvt_mode(dev,
 				    cmd->xres, cmd->yres,
 				    cmd->refresh_specified ? cmd->refresh : 60,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 558c098b0384..497434cc56cd 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -21,7 +21,26 @@ struct drm_client_modeset_test_priv {
 
 static int drm_client_modeset_connector_get_modes(struct drm_connector *connector)
 {
-	return drm_add_modes_noedid(connector, 1920, 1200);
+	struct drm_display_mode *mode;
+	int count;
+
+	count = drm_add_modes_noedid(connector, 1920, 1200);
+
+	mode = drm_mode_analog_ntsc_480i(connector->dev);
+	if (!mode)
+		return count;
+
+	drm_mode_probed_add(connector, mode);
+	count += 1;
+
+	mode = drm_mode_analog_pal_576i(connector->dev);
+	if (!mode)
+		return count;
+
+	drm_mode_probed_add(connector, mode);
+	count += 1;
+
+	return count;
 }
 
 static const struct drm_connector_helper_funcs drm_client_modeset_connector_helper_funcs = {
@@ -52,6 +71,9 @@ static int drm_client_modeset_test_init(struct kunit *test)
 
 	drm_connector_helper_add(&priv->connector, &drm_client_modeset_connector_helper_funcs);
 
+	priv->connector.interlace_allowed = true;
+	priv->connector.doublescan_allowed = true;
+
 	return 0;
 
 }
@@ -85,9 +107,68 @@ static void drm_test_pick_cmdline_res_1920_1080_60(struct kunit *test)
 	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
 }
 
+struct drm_connector_pick_cmdline_mode_test {
+	const char *cmdline;
+	struct drm_display_mode *(*func)(struct drm_device *);
+};
+
+#define TEST_CMDLINE(_cmdline, _fn)		\
+	{					\
+		.cmdline = _cmdline,		\
+		.func = _fn,			\
+	}
+
+static void drm_test_pick_cmdline_named(struct kunit *test)
+{
+	const struct drm_connector_pick_cmdline_mode_test *params = test->param_value;
+	struct drm_client_modeset_test_priv *priv = test->priv;
+	struct drm_device *drm = priv->drm;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+	const struct drm_display_mode *expected_mode, *mode;
+	const char *cmdline = params->cmdline;
+	int ret;
+
+	KUNIT_ASSERT_TRUE(test,
+			  drm_mode_parse_command_line_for_connector(cmdline,
+								    connector,
+								    cmdline_mode));
+
+	mutex_lock(&drm->mode_config.mutex);
+	ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+	mutex_unlock(&drm->mode_config.mutex);
+	KUNIT_ASSERT_GT(test, ret, 0);
+
+	mode = drm_connector_pick_cmdline_mode(connector);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	expected_mode = params->func(drm);
+	KUNIT_ASSERT_NOT_NULL(test, expected_mode);
+
+	KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
+}
+
+static const
+struct drm_connector_pick_cmdline_mode_test drm_connector_pick_cmdline_mode_tests[] = {
+	TEST_CMDLINE("NTSC", drm_mode_analog_ntsc_480i),
+	TEST_CMDLINE("PAL", drm_mode_analog_pal_576i),
+};
+
+static void
+drm_connector_pick_cmdline_mode_desc(const struct drm_connector_pick_cmdline_mode_test *t,
+				     char *desc)
+{
+	sprintf(desc, "%s", t->cmdline);
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_pick_cmdline_mode,
+		  drm_connector_pick_cmdline_mode_tests,
+		  drm_connector_pick_cmdline_mode_desc);
 
 static struct kunit_case drm_test_pick_cmdline_tests[] = {
 	KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
+	KUNIT_CASE_PARAM(drm_test_pick_cmdline_named,
+			 drm_connector_pick_cmdline_mode_gen_params),
 	{}
 };
 

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 16/25] drm/client: Remove match on mode name

[Maxime Ripard]

Commit 3aeeb13d8996 ("drm/modes: Support modes names on the command
line") initially introduced the named modes support by essentially
matching the name passed on the command-line to the mode names defined
by the drivers.

This proved to be difficult to work with, since all drivers had to
provide properly named modes. This was also needed because we weren't
passing a full blown-mode to the drivers, but were only filling its
name.

Thanks to the previous patches, we now generate a proper mode, and we
thus can use the usual matching algo on timings, and can simply drop the
name match.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- New patch
---
 drivers/gpu/drm/drm_client_modeset.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index d553e793e673..1b12a3c201a3 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -188,10 +188,6 @@ static struct drm_display_mode *drm_connector_pick_cmdline_mode(struct drm_conne
 	prefer_non_interlace = !cmdline_mode->interlace;
 again:
 	list_for_each_entry(mode, &connector->modes, head) {
-		/* Check (optional) mode name first */
-		if (!strcmp(mode->name, cmdline_mode->name))
-			return mode;
-
 		/* check width/height */
 		if (mode->hdisplay != cmdline_mode->xres ||
 		    mode->vdisplay != cmdline_mode->yres)

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 16/25] drm/client: Remove match on mode name

[Maxime Ripard]

Commit 3aeeb13d8996 ("drm/modes: Support modes names on the command
line") initially introduced the named modes support by essentially
matching the name passed on the command-line to the mode names defined
by the drivers.

This proved to be difficult to work with, since all drivers had to
provide properly named modes. This was also needed because we weren't
passing a full blown-mode to the drivers, but were only filling its
name.

Thanks to the previous patches, we now generate a proper mode, and we
thus can use the usual matching algo on timings, and can simply drop the
name match.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- New patch
---
 drivers/gpu/drm/drm_client_modeset.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index d553e793e673..1b12a3c201a3 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -188,10 +188,6 @@ static struct drm_display_mode *drm_connector_pick_cmdline_mode(struct drm_conne
 	prefer_non_interlace = !cmdline_mode->interlace;
 again:
 	list_for_each_entry(mode, &connector->modes, head) {
-		/* Check (optional) mode name first */
-		if (!strcmp(mode->name, cmdline_mode->name))
-			return mode;
-
 		/* check width/height */
 		if (mode->hdisplay != cmdline_mode->xres ||
 		    mode->vdisplay != cmdline_mode->yres)

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 16/25] drm/client: Remove match on mode name

[Maxime Ripard]

Commit 3aeeb13d8996 ("drm/modes: Support modes names on the command
line") initially introduced the named modes support by essentially
matching the name passed on the command-line to the mode names defined
by the drivers.

This proved to be difficult to work with, since all drivers had to
provide properly named modes. This was also needed because we weren't
passing a full blown-mode to the drivers, but were only filling its
name.

Thanks to the previous patches, we now generate a proper mode, and we
thus can use the usual matching algo on timings, and can simply drop the
name match.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- New patch
---
 drivers/gpu/drm/drm_client_modeset.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index d553e793e673..1b12a3c201a3 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -188,10 +188,6 @@ static struct drm_display_mode *drm_connector_pick_cmdline_mode(struct drm_conne
 	prefer_non_interlace = !cmdline_mode->interlace;
 again:
 	list_for_each_entry(mode, &connector->modes, head) {
-		/* Check (optional) mode name first */
-		if (!strcmp(mode->name, cmdline_mode->name))
-			return mode;
-
 		/* check width/height */
 		if (mode->hdisplay != cmdline_mode->xres ||
 		    mode->vdisplay != cmdline_mode->yres)

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 16/25] drm/client: Remove match on mode name

[Maxime Ripard]

Commit 3aeeb13d8996 ("drm/modes: Support modes names on the command
line") initially introduced the named modes support by essentially
matching the name passed on the command-line to the mode names defined
by the drivers.

This proved to be difficult to work with, since all drivers had to
provide properly named modes. This was also needed because we weren't
passing a full blown-mode to the drivers, but were only filling its
name.

Thanks to the previous patches, we now generate a proper mode, and we
thus can use the usual matching algo on timings, and can simply drop the
name match.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- New patch
---
 drivers/gpu/drm/drm_client_modeset.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index d553e793e673..1b12a3c201a3 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -188,10 +188,6 @@ static struct drm_display_mode *drm_connector_pick_cmdline_mode(struct drm_conne
 	prefer_non_interlace = !cmdline_mode->interlace;
 again:
 	list_for_each_entry(mode, &connector->modes, head) {
-		/* Check (optional) mode name first */
-		if (!strcmp(mode->name, cmdline_mode->name))
-			return mode;
-
 		/* check width/height */
 		if (mode->hdisplay != cmdline_mode->xres ||
 		    mode->vdisplay != cmdline_mode->yres)

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 16/25] drm/client: Remove match on mode name

[Maxime Ripard]

Commit 3aeeb13d8996 ("drm/modes: Support modes names on the command
line") initially introduced the named modes support by essentially
matching the name passed on the command-line to the mode names defined
by the drivers.

This proved to be difficult to work with, since all drivers had to
provide properly named modes. This was also needed because we weren't
passing a full blown-mode to the drivers, but were only filling its
name.

Thanks to the previous patches, we now generate a proper mode, and we
thus can use the usual matching algo on timings, and can simply drop the
name match.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- New patch
---
 drivers/gpu/drm/drm_client_modeset.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index d553e793e673..1b12a3c201a3 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -188,10 +188,6 @@ static struct drm_display_mode *drm_connector_pick_cmdline_mode(struct drm_conne
 	prefer_non_interlace = !cmdline_mode->interlace;
 again:
 	list_for_each_entry(mode, &connector->modes, head) {
-		/* Check (optional) mode name first */
-		if (!strcmp(mode->name, cmdline_mode->name))
-			return mode;
-
 		/* check width/height */
 		if (mode->hdisplay != cmdline_mode->xres ||
 		    mode->vdisplay != cmdline_mode->yres)

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 17/25] drm/modes: Introduce more named modes

[Maxime Ripard]

Now that we can easily extend the named modes list, let's add a few more
analog TV modes that were used in the wild, and some unit tests to make
sure it works as intended.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Document the new supported names

Changes in v6:
- Renamed the tests to follow DRM test naming convention

Changes in v5:
- Switched to KUNIT_ASSERT_NOT_NULL
---
 Documentation/fb/modedb.rst                     | 3 +++
 drivers/gpu/drm/drm_modes.c                     | 2 ++
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 2 ++
 3 files changed, 7 insertions(+)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index bebfe61caa77..bb2889c6ea27 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -29,7 +29,10 @@ Things between square brackets are optional.
 Valid names are::
 
   - NSTC: 480i output, with the CCIR System-M TV mode and NTSC color encoding
+  - NTSC-J: 480i output, with the CCIR System-M TV mode, the NTSC color
+    encoding, and a black level equal to the blanking level.
   - PAL: 576i output, with the CCIR System-B TV mode and PAL color encoding
+  - PAL-M: 480i output, with the CCIR System-M TV mode and PAL color encoding
 
 If 'M' is specified in the mode_option argument (after <yres> and before
 <bpp> and <refresh>, if specified) the timings will be calculated using
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index d3f0a3559812..855569a269b8 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2272,7 +2272,9 @@ struct drm_named_mode {
 
 static const struct drm_named_mode drm_named_modes[] = {
 	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC),
+	NAMED_MODE("NTSC-J", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC_J),
 	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL),
+	NAMED_MODE("PAL-M", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL_M),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 497434cc56cd..f2e18392a953 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -151,7 +151,9 @@ static void drm_test_pick_cmdline_named(struct kunit *test)
 static const
 struct drm_connector_pick_cmdline_mode_test drm_connector_pick_cmdline_mode_tests[] = {
 	TEST_CMDLINE("NTSC", drm_mode_analog_ntsc_480i),
+	TEST_CMDLINE("NTSC-J", drm_mode_analog_ntsc_480i),
 	TEST_CMDLINE("PAL", drm_mode_analog_pal_576i),
+	TEST_CMDLINE("PAL-M", drm_mode_analog_ntsc_480i),
 };
 
 static void

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 17/25] drm/modes: Introduce more named modes

[Maxime Ripard]

Now that we can easily extend the named modes list, let's add a few more
analog TV modes that were used in the wild, and some unit tests to make
sure it works as intended.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Document the new supported names

Changes in v6:
- Renamed the tests to follow DRM test naming convention

Changes in v5:
- Switched to KUNIT_ASSERT_NOT_NULL
---
 Documentation/fb/modedb.rst                     | 3 +++
 drivers/gpu/drm/drm_modes.c                     | 2 ++
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 2 ++
 3 files changed, 7 insertions(+)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index bebfe61caa77..bb2889c6ea27 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -29,7 +29,10 @@ Things between square brackets are optional.
 Valid names are::
 
   - NSTC: 480i output, with the CCIR System-M TV mode and NTSC color encoding
+  - NTSC-J: 480i output, with the CCIR System-M TV mode, the NTSC color
+    encoding, and a black level equal to the blanking level.
   - PAL: 576i output, with the CCIR System-B TV mode and PAL color encoding
+  - PAL-M: 480i output, with the CCIR System-M TV mode and PAL color encoding
 
 If 'M' is specified in the mode_option argument (after <yres> and before
 <bpp> and <refresh>, if specified) the timings will be calculated using
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index d3f0a3559812..855569a269b8 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2272,7 +2272,9 @@ struct drm_named_mode {
 
 static const struct drm_named_mode drm_named_modes[] = {
 	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC),
+	NAMED_MODE("NTSC-J", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC_J),
 	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL),
+	NAMED_MODE("PAL-M", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL_M),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 497434cc56cd..f2e18392a953 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -151,7 +151,9 @@ static void drm_test_pick_cmdline_named(struct kunit *test)
 static const
 struct drm_connector_pick_cmdline_mode_test drm_connector_pick_cmdline_mode_tests[] = {
 	TEST_CMDLINE("NTSC", drm_mode_analog_ntsc_480i),
+	TEST_CMDLINE("NTSC-J", drm_mode_analog_ntsc_480i),
 	TEST_CMDLINE("PAL", drm_mode_analog_pal_576i),
+	TEST_CMDLINE("PAL-M", drm_mode_analog_ntsc_480i),
 };
 
 static void

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 17/25] drm/modes: Introduce more named modes

[Maxime Ripard]

Now that we can easily extend the named modes list, let's add a few more
analog TV modes that were used in the wild, and some unit tests to make
sure it works as intended.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Document the new supported names

Changes in v6:
- Renamed the tests to follow DRM test naming convention

Changes in v5:
- Switched to KUNIT_ASSERT_NOT_NULL
---
 Documentation/fb/modedb.rst                     | 3 +++
 drivers/gpu/drm/drm_modes.c                     | 2 ++
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 2 ++
 3 files changed, 7 insertions(+)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index bebfe61caa77..bb2889c6ea27 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -29,7 +29,10 @@ Things between square brackets are optional.
 Valid names are::
 
   - NSTC: 480i output, with the CCIR System-M TV mode and NTSC color encoding
+  - NTSC-J: 480i output, with the CCIR System-M TV mode, the NTSC color
+    encoding, and a black level equal to the blanking level.
   - PAL: 576i output, with the CCIR System-B TV mode and PAL color encoding
+  - PAL-M: 480i output, with the CCIR System-M TV mode and PAL color encoding
 
 If 'M' is specified in the mode_option argument (after <yres> and before
 <bpp> and <refresh>, if specified) the timings will be calculated using
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index d3f0a3559812..855569a269b8 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2272,7 +2272,9 @@ struct drm_named_mode {
 
 static const struct drm_named_mode drm_named_modes[] = {
 	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC),
+	NAMED_MODE("NTSC-J", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC_J),
 	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL),
+	NAMED_MODE("PAL-M", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL_M),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 497434cc56cd..f2e18392a953 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -151,7 +151,9 @@ static void drm_test_pick_cmdline_named(struct kunit *test)
 static const
 struct drm_connector_pick_cmdline_mode_test drm_connector_pick_cmdline_mode_tests[] = {
 	TEST_CMDLINE("NTSC", drm_mode_analog_ntsc_480i),
+	TEST_CMDLINE("NTSC-J", drm_mode_analog_ntsc_480i),
 	TEST_CMDLINE("PAL", drm_mode_analog_pal_576i),
+	TEST_CMDLINE("PAL-M", drm_mode_analog_ntsc_480i),
 };
 
 static void

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 17/25] drm/modes: Introduce more named modes

[Maxime Ripard]

Now that we can easily extend the named modes list, let's add a few more
analog TV modes that were used in the wild, and some unit tests to make
sure it works as intended.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Document the new supported names

Changes in v6:
- Renamed the tests to follow DRM test naming convention

Changes in v5:
- Switched to KUNIT_ASSERT_NOT_NULL
---
 Documentation/fb/modedb.rst                     | 3 +++
 drivers/gpu/drm/drm_modes.c                     | 2 ++
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 2 ++
 3 files changed, 7 insertions(+)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index bebfe61caa77..bb2889c6ea27 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -29,7 +29,10 @@ Things between square brackets are optional.
 Valid names are::
 
   - NSTC: 480i output, with the CCIR System-M TV mode and NTSC color encoding
+  - NTSC-J: 480i output, with the CCIR System-M TV mode, the NTSC color
+    encoding, and a black level equal to the blanking level.
   - PAL: 576i output, with the CCIR System-B TV mode and PAL color encoding
+  - PAL-M: 480i output, with the CCIR System-M TV mode and PAL color encoding
 
 If 'M' is specified in the mode_option argument (after <yres> and before
 <bpp> and <refresh>, if specified) the timings will be calculated using
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index d3f0a3559812..855569a269b8 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2272,7 +2272,9 @@ struct drm_named_mode {
 
 static const struct drm_named_mode drm_named_modes[] = {
 	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC),
+	NAMED_MODE("NTSC-J", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC_J),
 	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL),
+	NAMED_MODE("PAL-M", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL_M),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 497434cc56cd..f2e18392a953 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -151,7 +151,9 @@ static void drm_test_pick_cmdline_named(struct kunit *test)
 static const
 struct drm_connector_pick_cmdline_mode_test drm_connector_pick_cmdline_mode_tests[] = {
 	TEST_CMDLINE("NTSC", drm_mode_analog_ntsc_480i),
+	TEST_CMDLINE("NTSC-J", drm_mode_analog_ntsc_480i),
 	TEST_CMDLINE("PAL", drm_mode_analog_pal_576i),
+	TEST_CMDLINE("PAL-M", drm_mode_analog_ntsc_480i),
 };
 
 static void

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 17/25] drm/modes: Introduce more named modes

[Maxime Ripard]

Now that we can easily extend the named modes list, let's add a few more
analog TV modes that were used in the wild, and some unit tests to make
sure it works as intended.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Document the new supported names

Changes in v6:
- Renamed the tests to follow DRM test naming convention

Changes in v5:
- Switched to KUNIT_ASSERT_NOT_NULL
---
 Documentation/fb/modedb.rst                     | 3 +++
 drivers/gpu/drm/drm_modes.c                     | 2 ++
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 2 ++
 3 files changed, 7 insertions(+)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index bebfe61caa77..bb2889c6ea27 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -29,7 +29,10 @@ Things between square brackets are optional.
 Valid names are::
 
   - NSTC: 480i output, with the CCIR System-M TV mode and NTSC color encoding
+  - NTSC-J: 480i output, with the CCIR System-M TV mode, the NTSC color
+    encoding, and a black level equal to the blanking level.
   - PAL: 576i output, with the CCIR System-B TV mode and PAL color encoding
+  - PAL-M: 480i output, with the CCIR System-M TV mode and PAL color encoding
 
 If 'M' is specified in the mode_option argument (after <yres> and before
 <bpp> and <refresh>, if specified) the timings will be calculated using
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index d3f0a3559812..855569a269b8 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2272,7 +2272,9 @@ struct drm_named_mode {
 
 static const struct drm_named_mode drm_named_modes[] = {
 	NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC),
+	NAMED_MODE("NTSC-J", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC_J),
 	NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL),
+	NAMED_MODE("PAL-M", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL_M),
 };
 
 static int drm_mode_parse_cmdline_named_mode(const char *name,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 497434cc56cd..f2e18392a953 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -151,7 +151,9 @@ static void drm_test_pick_cmdline_named(struct kunit *test)
 static const
 struct drm_connector_pick_cmdline_mode_test drm_connector_pick_cmdline_mode_tests[] = {
 	TEST_CMDLINE("NTSC", drm_mode_analog_ntsc_480i),
+	TEST_CMDLINE("NTSC-J", drm_mode_analog_ntsc_480i),
 	TEST_CMDLINE("PAL", drm_mode_analog_pal_576i),
+	TEST_CMDLINE("PAL-M", drm_mode_analog_ntsc_480i),
 };
 
 static void

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 18/25] drm/probe-helper: Provide a TV get_modes helper

[Maxime Ripard]

From: Noralf Trønnes <noralf@tronnes.org>

Most of the TV connectors will need a similar get_modes implementation
that will, depending on the drivers' capabilities, register the 480i and
576i modes.

That implementation will also need to set the preferred flag and order
the modes based on the driver and users preferrence.

This is especially important to guarantee that a userspace stack such as
Xorg can start and pick up the preferred mode while maintaining a
working output.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Store a function pointer instead of duplicating the expected mode
- Switch to kunit_test_suite

Changes in v8:
- Remove unused tv_mode_support function
- Add unit tests

Changes in v7:
- Used Noralf's implementation

Changes in v6:
- New patch
---
 drivers/gpu/drm/drm_probe_helper.c            |  82 +++++++++++
 drivers/gpu/drm/tests/Makefile                |   1 +
 drivers/gpu/drm/tests/drm_probe_helper_test.c | 202 ++++++++++++++++++++++++++
 include/drm/drm_probe_helper.h                |   1 +
 4 files changed, 286 insertions(+)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index bcd9611dabfd..1ea053cef557 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -1146,3 +1146,85 @@ int drm_connector_helper_get_modes(struct drm_connector *connector)
 	return count;
 }
 EXPORT_SYMBOL(drm_connector_helper_get_modes);
+
+/**
+ * drm_connector_helper_tv_get_modes - Fills the modes availables to a TV connector
+ * @connector: The connector
+ *
+ * Fills the available modes for a TV connector based on the supported
+ * TV modes, and the default mode expressed by the kernel command line.
+ *
+ * This can be used as the default TV connector helper .get_modes() hook
+ * if the driver does not need any special processing.
+ *
+ * Returns:
+ * The number of modes added to the connector.
+ */
+int drm_connector_helper_tv_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *tv_mode_property =
+		dev->mode_config.tv_mode_property;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	unsigned int ntsc_modes = BIT(DRM_MODE_TV_MODE_NTSC) |
+		BIT(DRM_MODE_TV_MODE_NTSC_443) |
+		BIT(DRM_MODE_TV_MODE_NTSC_J) |
+		BIT(DRM_MODE_TV_MODE_PAL_M);
+	unsigned int pal_modes = BIT(DRM_MODE_TV_MODE_PAL) |
+		BIT(DRM_MODE_TV_MODE_PAL_N) |
+		BIT(DRM_MODE_TV_MODE_SECAM);
+	unsigned int tv_modes[2] = { UINT_MAX, UINT_MAX };
+	unsigned int i, supported_tv_modes = 0;
+
+	if (!tv_mode_property)
+		return 0;
+
+	for (i = 0; i < tv_mode_property->num_values; i++)
+		supported_tv_modes |= BIT(tv_mode_property->values[i]);
+
+	if ((supported_tv_modes & ntsc_modes) &&
+	    (supported_tv_modes & pal_modes)) {
+		uint64_t default_mode;
+
+		if (drm_object_property_get_default_value(&connector->base,
+							  tv_mode_property,
+							  &default_mode))
+			return 0;
+
+		if (cmdline->tv_mode_specified)
+			default_mode = cmdline->tv_mode;
+
+		if (BIT(default_mode) & ntsc_modes) {
+			tv_modes[0] = DRM_MODE_TV_MODE_NTSC;
+			tv_modes[1] = DRM_MODE_TV_MODE_PAL;
+		} else {
+			tv_modes[0] = DRM_MODE_TV_MODE_PAL;
+			tv_modes[1] = DRM_MODE_TV_MODE_NTSC;
+		}
+	} else if (supported_tv_modes & ntsc_modes) {
+		tv_modes[0] = DRM_MODE_TV_MODE_NTSC;
+	} else if (supported_tv_modes & pal_modes) {
+		tv_modes[0] = DRM_MODE_TV_MODE_PAL;
+	} else {
+		return 0;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
+		struct drm_display_mode *mode;
+
+		if (tv_modes[i] == DRM_MODE_TV_MODE_NTSC)
+			mode = drm_mode_analog_ntsc_480i(dev);
+		else if (tv_modes[i] == DRM_MODE_TV_MODE_PAL)
+			mode = drm_mode_analog_pal_576i(dev);
+		else
+			break;
+		if (!mode)
+			return i;
+		if (!i)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+		drm_mode_probed_add(connector, mode);
+	}
+
+	return i;
+}
+EXPORT_SYMBOL(drm_connector_helper_tv_get_modes);
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index c7903c112c65..94fe546d937d 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -13,4 +13,5 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_mm_test.o \
 	drm_modes_test.o \
 	drm_plane_helper_test.o \
+	drm_probe_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_probe_helper_test.c b/drivers/gpu/drm/tests/drm_probe_helper_test.c
new file mode 100644
index 000000000000..a875ca0a76da
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_probe_helper_test.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_probe_helper functions
+ */
+
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_device.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_mode.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include <kunit/test.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_probe_helper_test_priv {
+	struct drm_device *drm;
+	struct drm_connector connector;
+};
+
+static const struct drm_connector_helper_funcs drm_probe_helper_connector_helper_funcs = {
+};
+
+static const struct drm_connector_funcs drm_probe_helper_connector_funcs = {
+	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
+	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
+	.reset			= drm_atomic_helper_connector_reset,
+};
+
+static int drm_probe_helper_test_init(struct kunit *test)
+{
+	struct drm_probe_helper_test_priv *priv;
+	struct drm_connector *connector;
+	int ret;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+	test->priv = priv;
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET | DRIVER_ATOMIC,
+					  "drm-probe-helper-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	connector = &priv->connector;
+	ret = drmm_connector_init(priv->drm, connector,
+				  &drm_probe_helper_connector_funcs,
+				  DRM_MODE_CONNECTOR_Unknown,
+				  NULL);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_connector_helper_add(connector, &drm_probe_helper_connector_helper_funcs);
+
+	return 0;
+}
+
+typedef struct drm_display_mode *(*expected_mode_func_t)(struct drm_device *);
+
+struct drm_connector_helper_tv_get_modes_test {
+	const char *name;
+	unsigned int supported_tv_modes;
+	enum drm_connector_tv_mode default_mode;
+	bool cmdline;
+	enum drm_connector_tv_mode cmdline_mode;
+	expected_mode_func_t *expected_modes;
+	unsigned int num_expected_modes;
+};
+
+#define _TV_MODE_TEST(_name, _supported, _default, _cmdline, _cmdline_mode, ...) 		\
+	{											\
+		.name = _name,									\
+		.supported_tv_modes = _supported,						\
+		.default_mode = _default,							\
+		.cmdline = _cmdline,								\
+		.cmdline_mode = _cmdline_mode,							\
+		.expected_modes = (expected_mode_func_t[]) { __VA_ARGS__ }, 			\
+		.num_expected_modes = sizeof((expected_mode_func_t[]) { __VA_ARGS__ }) /	\
+				      (sizeof(expected_mode_func_t)),				\
+	}
+
+#define TV_MODE_TEST(_name, _supported, _default, ...)			\
+	_TV_MODE_TEST(_name, _supported, _default, false, 0, __VA_ARGS__)
+
+#define TV_MODE_TEST_CMDLINE(_name, _supported, _default, _cmdline, ...) \
+	_TV_MODE_TEST(_name, _supported, _default, true, _cmdline, __VA_ARGS__)
+
+static void
+drm_test_connector_helper_tv_get_modes_check(struct kunit *test)
+{
+	const struct drm_connector_helper_tv_get_modes_test *params = test->param_value;
+	struct drm_probe_helper_test_priv *priv = test->priv;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	struct drm_display_mode *mode;
+	const struct drm_display_mode *expected;
+	size_t len;
+	int ret;
+
+	if (params->cmdline) {
+		cmdline->tv_mode_specified = true;
+		cmdline->tv_mode = params->cmdline_mode;
+	}
+
+	ret = drm_mode_create_tv_properties(priv->drm, params->supported_tv_modes);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_object_attach_property(&connector->base,
+				   priv->drm->mode_config.tv_mode_property,
+		 		   params->default_mode);
+
+	mutex_lock(&priv->drm->mode_config.mutex);
+
+	ret = drm_connector_helper_tv_get_modes(connector);
+	KUNIT_EXPECT_EQ(test, ret, params->num_expected_modes);
+
+	list_for_each_entry(mode, &connector->probed_modes, head)
+		len++;
+	KUNIT_EXPECT_EQ(test, len, params->num_expected_modes);
+
+	if (params->num_expected_modes >= 1) {
+		mode = list_first_entry_or_null(&connector->probed_modes,
+						struct drm_display_mode, head);
+		KUNIT_ASSERT_NOT_NULL(test, mode);
+
+		expected = params->expected_modes[0](priv->drm);
+		KUNIT_ASSERT_NOT_NULL(test, expected);
+
+		KUNIT_EXPECT_TRUE(test, drm_mode_equal(mode, expected));
+		KUNIT_EXPECT_TRUE(test, mode->type & DRM_MODE_TYPE_PREFERRED);
+	}
+
+	if (params->num_expected_modes >= 2) {
+		mode = list_next_entry(mode, head);
+		KUNIT_ASSERT_NOT_NULL(test, mode);
+
+		expected = params->expected_modes[1](priv->drm);
+		KUNIT_ASSERT_NOT_NULL(test, expected);
+
+		KUNIT_EXPECT_TRUE(test, drm_mode_equal(mode, expected));
+		KUNIT_EXPECT_FALSE(test, mode->type & DRM_MODE_TYPE_PREFERRED);
+	}
+
+	mutex_unlock(&priv->drm->mode_config.mutex);
+}
+
+static const
+struct drm_connector_helper_tv_get_modes_test drm_connector_helper_tv_get_modes_tests[] = {
+	{ .name = "None" },
+	TV_MODE_TEST("PAL",
+		     BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_PAL,
+		     drm_mode_analog_pal_576i),
+	TV_MODE_TEST("NTSC",
+		     BIT(DRM_MODE_TV_MODE_NTSC),
+		     DRM_MODE_TV_MODE_NTSC,
+		     drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST("Both, NTSC Default",
+		     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_NTSC,
+		     drm_mode_analog_ntsc_480i, drm_mode_analog_pal_576i),
+	TV_MODE_TEST("Both, PAL Default",
+		     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_PAL,
+		     drm_mode_analog_pal_576i, drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST_CMDLINE("Both, NTSC Default, with PAL on command-line",
+			     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+			     DRM_MODE_TV_MODE_NTSC,
+			     DRM_MODE_TV_MODE_PAL,
+			     drm_mode_analog_pal_576i, drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST_CMDLINE("Both, PAL Default, with NTSC on command-line",
+			     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+			     DRM_MODE_TV_MODE_PAL,
+			     DRM_MODE_TV_MODE_NTSC,
+			     drm_mode_analog_ntsc_480i, drm_mode_analog_pal_576i),
+};
+
+static void
+drm_connector_helper_tv_get_modes_desc(const struct drm_connector_helper_tv_get_modes_test *t,
+				       char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_helper_tv_get_modes,
+		  drm_connector_helper_tv_get_modes_tests,
+		  drm_connector_helper_tv_get_modes_desc);
+
+static struct kunit_case drm_test_connector_helper_tv_get_modes_tests[] = {
+	KUNIT_CASE_PARAM(drm_test_connector_helper_tv_get_modes_check,
+			 drm_connector_helper_tv_get_modes_gen_params),
+	{ }
+};
+
+static struct kunit_suite drm_test_connector_helper_tv_get_modes_suite = {
+	.name = "drm_connector_helper_tv_get_modes",
+	.init = drm_probe_helper_test_init,
+	.test_cases = drm_test_connector_helper_tv_get_modes_tests,
+};
+
+kunit_test_suite(drm_test_connector_helper_tv_get_modes_suite);
diff --git a/include/drm/drm_probe_helper.h b/include/drm/drm_probe_helper.h
index 5880daa14624..4977e0ab72db 100644
--- a/include/drm/drm_probe_helper.h
+++ b/include/drm/drm_probe_helper.h
@@ -35,5 +35,6 @@ int drm_connector_helper_get_modes_from_ddc(struct drm_connector *connector);
 int drm_connector_helper_get_modes_fixed(struct drm_connector *connector,
 					 const struct drm_display_mode *fixed_mode);
 int drm_connector_helper_get_modes(struct drm_connector *connector);
+int drm_connector_helper_tv_get_modes(struct drm_connector *connector);
 
 #endif

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 18/25] drm/probe-helper: Provide a TV get_modes helper

[Maxime Ripard]

From: Noralf Trønnes <noralf@tronnes.org>

Most of the TV connectors will need a similar get_modes implementation
that will, depending on the drivers' capabilities, register the 480i and
576i modes.

That implementation will also need to set the preferred flag and order
the modes based on the driver and users preferrence.

This is especially important to guarantee that a userspace stack such as
Xorg can start and pick up the preferred mode while maintaining a
working output.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Store a function pointer instead of duplicating the expected mode
- Switch to kunit_test_suite

Changes in v8:
- Remove unused tv_mode_support function
- Add unit tests

Changes in v7:
- Used Noralf's implementation

Changes in v6:
- New patch
---
 drivers/gpu/drm/drm_probe_helper.c            |  82 +++++++++++
 drivers/gpu/drm/tests/Makefile                |   1 +
 drivers/gpu/drm/tests/drm_probe_helper_test.c | 202 ++++++++++++++++++++++++++
 include/drm/drm_probe_helper.h                |   1 +
 4 files changed, 286 insertions(+)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index bcd9611dabfd..1ea053cef557 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -1146,3 +1146,85 @@ int drm_connector_helper_get_modes(struct drm_connector *connector)
 	return count;
 }
 EXPORT_SYMBOL(drm_connector_helper_get_modes);
+
+/**
+ * drm_connector_helper_tv_get_modes - Fills the modes availables to a TV connector
+ * @connector: The connector
+ *
+ * Fills the available modes for a TV connector based on the supported
+ * TV modes, and the default mode expressed by the kernel command line.
+ *
+ * This can be used as the default TV connector helper .get_modes() hook
+ * if the driver does not need any special processing.
+ *
+ * Returns:
+ * The number of modes added to the connector.
+ */
+int drm_connector_helper_tv_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *tv_mode_property =
+		dev->mode_config.tv_mode_property;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	unsigned int ntsc_modes = BIT(DRM_MODE_TV_MODE_NTSC) |
+		BIT(DRM_MODE_TV_MODE_NTSC_443) |
+		BIT(DRM_MODE_TV_MODE_NTSC_J) |
+		BIT(DRM_MODE_TV_MODE_PAL_M);
+	unsigned int pal_modes = BIT(DRM_MODE_TV_MODE_PAL) |
+		BIT(DRM_MODE_TV_MODE_PAL_N) |
+		BIT(DRM_MODE_TV_MODE_SECAM);
+	unsigned int tv_modes[2] = { UINT_MAX, UINT_MAX };
+	unsigned int i, supported_tv_modes = 0;
+
+	if (!tv_mode_property)
+		return 0;
+
+	for (i = 0; i < tv_mode_property->num_values; i++)
+		supported_tv_modes |= BIT(tv_mode_property->values[i]);
+
+	if ((supported_tv_modes & ntsc_modes) &&
+	    (supported_tv_modes & pal_modes)) {
+		uint64_t default_mode;
+
+		if (drm_object_property_get_default_value(&connector->base,
+							  tv_mode_property,
+							  &default_mode))
+			return 0;
+
+		if (cmdline->tv_mode_specified)
+			default_mode = cmdline->tv_mode;
+
+		if (BIT(default_mode) & ntsc_modes) {
+			tv_modes[0] = DRM_MODE_TV_MODE_NTSC;
+			tv_modes[1] = DRM_MODE_TV_MODE_PAL;
+		} else {
+			tv_modes[0] = DRM_MODE_TV_MODE_PAL;
+			tv_modes[1] = DRM_MODE_TV_MODE_NTSC;
+		}
+	} else if (supported_tv_modes & ntsc_modes) {
+		tv_modes[0] = DRM_MODE_TV_MODE_NTSC;
+	} else if (supported_tv_modes & pal_modes) {
+		tv_modes[0] = DRM_MODE_TV_MODE_PAL;
+	} else {
+		return 0;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
+		struct drm_display_mode *mode;
+
+		if (tv_modes[i] == DRM_MODE_TV_MODE_NTSC)
+			mode = drm_mode_analog_ntsc_480i(dev);
+		else if (tv_modes[i] == DRM_MODE_TV_MODE_PAL)
+			mode = drm_mode_analog_pal_576i(dev);
+		else
+			break;
+		if (!mode)
+			return i;
+		if (!i)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+		drm_mode_probed_add(connector, mode);
+	}
+
+	return i;
+}
+EXPORT_SYMBOL(drm_connector_helper_tv_get_modes);
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index c7903c112c65..94fe546d937d 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -13,4 +13,5 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_mm_test.o \
 	drm_modes_test.o \
 	drm_plane_helper_test.o \
+	drm_probe_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_probe_helper_test.c b/drivers/gpu/drm/tests/drm_probe_helper_test.c
new file mode 100644
index 000000000000..a875ca0a76da
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_probe_helper_test.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_probe_helper functions
+ */
+
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_device.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_mode.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include <kunit/test.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_probe_helper_test_priv {
+	struct drm_device *drm;
+	struct drm_connector connector;
+};
+
+static const struct drm_connector_helper_funcs drm_probe_helper_connector_helper_funcs = {
+};
+
+static const struct drm_connector_funcs drm_probe_helper_connector_funcs = {
+	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
+	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
+	.reset			= drm_atomic_helper_connector_reset,
+};
+
+static int drm_probe_helper_test_init(struct kunit *test)
+{
+	struct drm_probe_helper_test_priv *priv;
+	struct drm_connector *connector;
+	int ret;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+	test->priv = priv;
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET | DRIVER_ATOMIC,
+					  "drm-probe-helper-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	connector = &priv->connector;
+	ret = drmm_connector_init(priv->drm, connector,
+				  &drm_probe_helper_connector_funcs,
+				  DRM_MODE_CONNECTOR_Unknown,
+				  NULL);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_connector_helper_add(connector, &drm_probe_helper_connector_helper_funcs);
+
+	return 0;
+}
+
+typedef struct drm_display_mode *(*expected_mode_func_t)(struct drm_device *);
+
+struct drm_connector_helper_tv_get_modes_test {
+	const char *name;
+	unsigned int supported_tv_modes;
+	enum drm_connector_tv_mode default_mode;
+	bool cmdline;
+	enum drm_connector_tv_mode cmdline_mode;
+	expected_mode_func_t *expected_modes;
+	unsigned int num_expected_modes;
+};
+
+#define _TV_MODE_TEST(_name, _supported, _default, _cmdline, _cmdline_mode, ...) 		\
+	{											\
+		.name = _name,									\
+		.supported_tv_modes = _supported,						\
+		.default_mode = _default,							\
+		.cmdline = _cmdline,								\
+		.cmdline_mode = _cmdline_mode,							\
+		.expected_modes = (expected_mode_func_t[]) { __VA_ARGS__ }, 			\
+		.num_expected_modes = sizeof((expected_mode_func_t[]) { __VA_ARGS__ }) /	\
+				      (sizeof(expected_mode_func_t)),				\
+	}
+
+#define TV_MODE_TEST(_name, _supported, _default, ...)			\
+	_TV_MODE_TEST(_name, _supported, _default, false, 0, __VA_ARGS__)
+
+#define TV_MODE_TEST_CMDLINE(_name, _supported, _default, _cmdline, ...) \
+	_TV_MODE_TEST(_name, _supported, _default, true, _cmdline, __VA_ARGS__)
+
+static void
+drm_test_connector_helper_tv_get_modes_check(struct kunit *test)
+{
+	const struct drm_connector_helper_tv_get_modes_test *params = test->param_value;
+	struct drm_probe_helper_test_priv *priv = test->priv;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	struct drm_display_mode *mode;
+	const struct drm_display_mode *expected;
+	size_t len;
+	int ret;
+
+	if (params->cmdline) {
+		cmdline->tv_mode_specified = true;
+		cmdline->tv_mode = params->cmdline_mode;
+	}
+
+	ret = drm_mode_create_tv_properties(priv->drm, params->supported_tv_modes);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_object_attach_property(&connector->base,
+				   priv->drm->mode_config.tv_mode_property,
+		 		   params->default_mode);
+
+	mutex_lock(&priv->drm->mode_config.mutex);
+
+	ret = drm_connector_helper_tv_get_modes(connector);
+	KUNIT_EXPECT_EQ(test, ret, params->num_expected_modes);
+
+	list_for_each_entry(mode, &connector->probed_modes, head)
+		len++;
+	KUNIT_EXPECT_EQ(test, len, params->num_expected_modes);
+
+	if (params->num_expected_modes >= 1) {
+		mode = list_first_entry_or_null(&connector->probed_modes,
+						struct drm_display_mode, head);
+		KUNIT_ASSERT_NOT_NULL(test, mode);
+
+		expected = params->expected_modes[0](priv->drm);
+		KUNIT_ASSERT_NOT_NULL(test, expected);
+
+		KUNIT_EXPECT_TRUE(test, drm_mode_equal(mode, expected));
+		KUNIT_EXPECT_TRUE(test, mode->type & DRM_MODE_TYPE_PREFERRED);
+	}
+
+	if (params->num_expected_modes >= 2) {
+		mode = list_next_entry(mode, head);
+		KUNIT_ASSERT_NOT_NULL(test, mode);
+
+		expected = params->expected_modes[1](priv->drm);
+		KUNIT_ASSERT_NOT_NULL(test, expected);
+
+		KUNIT_EXPECT_TRUE(test, drm_mode_equal(mode, expected));
+		KUNIT_EXPECT_FALSE(test, mode->type & DRM_MODE_TYPE_PREFERRED);
+	}
+
+	mutex_unlock(&priv->drm->mode_config.mutex);
+}
+
+static const
+struct drm_connector_helper_tv_get_modes_test drm_connector_helper_tv_get_modes_tests[] = {
+	{ .name = "None" },
+	TV_MODE_TEST("PAL",
+		     BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_PAL,
+		     drm_mode_analog_pal_576i),
+	TV_MODE_TEST("NTSC",
+		     BIT(DRM_MODE_TV_MODE_NTSC),
+		     DRM_MODE_TV_MODE_NTSC,
+		     drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST("Both, NTSC Default",
+		     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_NTSC,
+		     drm_mode_analog_ntsc_480i, drm_mode_analog_pal_576i),
+	TV_MODE_TEST("Both, PAL Default",
+		     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_PAL,
+		     drm_mode_analog_pal_576i, drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST_CMDLINE("Both, NTSC Default, with PAL on command-line",
+			     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+			     DRM_MODE_TV_MODE_NTSC,
+			     DRM_MODE_TV_MODE_PAL,
+			     drm_mode_analog_pal_576i, drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST_CMDLINE("Both, PAL Default, with NTSC on command-line",
+			     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+			     DRM_MODE_TV_MODE_PAL,
+			     DRM_MODE_TV_MODE_NTSC,
+			     drm_mode_analog_ntsc_480i, drm_mode_analog_pal_576i),
+};
+
+static void
+drm_connector_helper_tv_get_modes_desc(const struct drm_connector_helper_tv_get_modes_test *t,
+				       char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_helper_tv_get_modes,
+		  drm_connector_helper_tv_get_modes_tests,
+		  drm_connector_helper_tv_get_modes_desc);
+
+static struct kunit_case drm_test_connector_helper_tv_get_modes_tests[] = {
+	KUNIT_CASE_PARAM(drm_test_connector_helper_tv_get_modes_check,
+			 drm_connector_helper_tv_get_modes_gen_params),
+	{ }
+};
+
+static struct kunit_suite drm_test_connector_helper_tv_get_modes_suite = {
+	.name = "drm_connector_helper_tv_get_modes",
+	.init = drm_probe_helper_test_init,
+	.test_cases = drm_test_connector_helper_tv_get_modes_tests,
+};
+
+kunit_test_suite(drm_test_connector_helper_tv_get_modes_suite);
diff --git a/include/drm/drm_probe_helper.h b/include/drm/drm_probe_helper.h
index 5880daa14624..4977e0ab72db 100644
--- a/include/drm/drm_probe_helper.h
+++ b/include/drm/drm_probe_helper.h
@@ -35,5 +35,6 @@ int drm_connector_helper_get_modes_from_ddc(struct drm_connector *connector);
 int drm_connector_helper_get_modes_fixed(struct drm_connector *connector,
 					 const struct drm_display_mode *fixed_mode);
 int drm_connector_helper_get_modes(struct drm_connector *connector);
+int drm_connector_helper_tv_get_modes(struct drm_connector *connector);
 
 #endif

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 18/25] drm/probe-helper: Provide a TV get_modes helper

[Maxime Ripard]

From: Noralf Trønnes <noralf@tronnes.org>

Most of the TV connectors will need a similar get_modes implementation
that will, depending on the drivers' capabilities, register the 480i and
576i modes.

That implementation will also need to set the preferred flag and order
the modes based on the driver and users preferrence.

This is especially important to guarantee that a userspace stack such as
Xorg can start and pick up the preferred mode while maintaining a
working output.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Store a function pointer instead of duplicating the expected mode
- Switch to kunit_test_suite

Changes in v8:
- Remove unused tv_mode_support function
- Add unit tests

Changes in v7:
- Used Noralf's implementation

Changes in v6:
- New patch
---
 drivers/gpu/drm/drm_probe_helper.c            |  82 +++++++++++
 drivers/gpu/drm/tests/Makefile                |   1 +
 drivers/gpu/drm/tests/drm_probe_helper_test.c | 202 ++++++++++++++++++++++++++
 include/drm/drm_probe_helper.h                |   1 +
 4 files changed, 286 insertions(+)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index bcd9611dabfd..1ea053cef557 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -1146,3 +1146,85 @@ int drm_connector_helper_get_modes(struct drm_connector *connector)
 	return count;
 }
 EXPORT_SYMBOL(drm_connector_helper_get_modes);
+
+/**
+ * drm_connector_helper_tv_get_modes - Fills the modes availables to a TV connector
+ * @connector: The connector
+ *
+ * Fills the available modes for a TV connector based on the supported
+ * TV modes, and the default mode expressed by the kernel command line.
+ *
+ * This can be used as the default TV connector helper .get_modes() hook
+ * if the driver does not need any special processing.
+ *
+ * Returns:
+ * The number of modes added to the connector.
+ */
+int drm_connector_helper_tv_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *tv_mode_property =
+		dev->mode_config.tv_mode_property;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	unsigned int ntsc_modes = BIT(DRM_MODE_TV_MODE_NTSC) |
+		BIT(DRM_MODE_TV_MODE_NTSC_443) |
+		BIT(DRM_MODE_TV_MODE_NTSC_J) |
+		BIT(DRM_MODE_TV_MODE_PAL_M);
+	unsigned int pal_modes = BIT(DRM_MODE_TV_MODE_PAL) |
+		BIT(DRM_MODE_TV_MODE_PAL_N) |
+		BIT(DRM_MODE_TV_MODE_SECAM);
+	unsigned int tv_modes[2] = { UINT_MAX, UINT_MAX };
+	unsigned int i, supported_tv_modes = 0;
+
+	if (!tv_mode_property)
+		return 0;
+
+	for (i = 0; i < tv_mode_property->num_values; i++)
+		supported_tv_modes |= BIT(tv_mode_property->values[i]);
+
+	if ((supported_tv_modes & ntsc_modes) &&
+	    (supported_tv_modes & pal_modes)) {
+		uint64_t default_mode;
+
+		if (drm_object_property_get_default_value(&connector->base,
+							  tv_mode_property,
+							  &default_mode))
+			return 0;
+
+		if (cmdline->tv_mode_specified)
+			default_mode = cmdline->tv_mode;
+
+		if (BIT(default_mode) & ntsc_modes) {
+			tv_modes[0] = DRM_MODE_TV_MODE_NTSC;
+			tv_modes[1] = DRM_MODE_TV_MODE_PAL;
+		} else {
+			tv_modes[0] = DRM_MODE_TV_MODE_PAL;
+			tv_modes[1] = DRM_MODE_TV_MODE_NTSC;
+		}
+	} else if (supported_tv_modes & ntsc_modes) {
+		tv_modes[0] = DRM_MODE_TV_MODE_NTSC;
+	} else if (supported_tv_modes & pal_modes) {
+		tv_modes[0] = DRM_MODE_TV_MODE_PAL;
+	} else {
+		return 0;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
+		struct drm_display_mode *mode;
+
+		if (tv_modes[i] == DRM_MODE_TV_MODE_NTSC)
+			mode = drm_mode_analog_ntsc_480i(dev);
+		else if (tv_modes[i] == DRM_MODE_TV_MODE_PAL)
+			mode = drm_mode_analog_pal_576i(dev);
+		else
+			break;
+		if (!mode)
+			return i;
+		if (!i)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+		drm_mode_probed_add(connector, mode);
+	}
+
+	return i;
+}
+EXPORT_SYMBOL(drm_connector_helper_tv_get_modes);
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index c7903c112c65..94fe546d937d 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -13,4 +13,5 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_mm_test.o \
 	drm_modes_test.o \
 	drm_plane_helper_test.o \
+	drm_probe_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_probe_helper_test.c b/drivers/gpu/drm/tests/drm_probe_helper_test.c
new file mode 100644
index 000000000000..a875ca0a76da
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_probe_helper_test.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_probe_helper functions
+ */
+
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_device.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_mode.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include <kunit/test.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_probe_helper_test_priv {
+	struct drm_device *drm;
+	struct drm_connector connector;
+};
+
+static const struct drm_connector_helper_funcs drm_probe_helper_connector_helper_funcs = {
+};
+
+static const struct drm_connector_funcs drm_probe_helper_connector_funcs = {
+	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
+	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
+	.reset			= drm_atomic_helper_connector_reset,
+};
+
+static int drm_probe_helper_test_init(struct kunit *test)
+{
+	struct drm_probe_helper_test_priv *priv;
+	struct drm_connector *connector;
+	int ret;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+	test->priv = priv;
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET | DRIVER_ATOMIC,
+					  "drm-probe-helper-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	connector = &priv->connector;
+	ret = drmm_connector_init(priv->drm, connector,
+				  &drm_probe_helper_connector_funcs,
+				  DRM_MODE_CONNECTOR_Unknown,
+				  NULL);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_connector_helper_add(connector, &drm_probe_helper_connector_helper_funcs);
+
+	return 0;
+}
+
+typedef struct drm_display_mode *(*expected_mode_func_t)(struct drm_device *);
+
+struct drm_connector_helper_tv_get_modes_test {
+	const char *name;
+	unsigned int supported_tv_modes;
+	enum drm_connector_tv_mode default_mode;
+	bool cmdline;
+	enum drm_connector_tv_mode cmdline_mode;
+	expected_mode_func_t *expected_modes;
+	unsigned int num_expected_modes;
+};
+
+#define _TV_MODE_TEST(_name, _supported, _default, _cmdline, _cmdline_mode, ...) 		\
+	{											\
+		.name = _name,									\
+		.supported_tv_modes = _supported,						\
+		.default_mode = _default,							\
+		.cmdline = _cmdline,								\
+		.cmdline_mode = _cmdline_mode,							\
+		.expected_modes = (expected_mode_func_t[]) { __VA_ARGS__ }, 			\
+		.num_expected_modes = sizeof((expected_mode_func_t[]) { __VA_ARGS__ }) /	\
+				      (sizeof(expected_mode_func_t)),				\
+	}
+
+#define TV_MODE_TEST(_name, _supported, _default, ...)			\
+	_TV_MODE_TEST(_name, _supported, _default, false, 0, __VA_ARGS__)
+
+#define TV_MODE_TEST_CMDLINE(_name, _supported, _default, _cmdline, ...) \
+	_TV_MODE_TEST(_name, _supported, _default, true, _cmdline, __VA_ARGS__)
+
+static void
+drm_test_connector_helper_tv_get_modes_check(struct kunit *test)
+{
+	const struct drm_connector_helper_tv_get_modes_test *params = test->param_value;
+	struct drm_probe_helper_test_priv *priv = test->priv;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	struct drm_display_mode *mode;
+	const struct drm_display_mode *expected;
+	size_t len;
+	int ret;
+
+	if (params->cmdline) {
+		cmdline->tv_mode_specified = true;
+		cmdline->tv_mode = params->cmdline_mode;
+	}
+
+	ret = drm_mode_create_tv_properties(priv->drm, params->supported_tv_modes);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_object_attach_property(&connector->base,
+				   priv->drm->mode_config.tv_mode_property,
+		 		   params->default_mode);
+
+	mutex_lock(&priv->drm->mode_config.mutex);
+
+	ret = drm_connector_helper_tv_get_modes(connector);
+	KUNIT_EXPECT_EQ(test, ret, params->num_expected_modes);
+
+	list_for_each_entry(mode, &connector->probed_modes, head)
+		len++;
+	KUNIT_EXPECT_EQ(test, len, params->num_expected_modes);
+
+	if (params->num_expected_modes >= 1) {
+		mode = list_first_entry_or_null(&connector->probed_modes,
+						struct drm_display_mode, head);
+		KUNIT_ASSERT_NOT_NULL(test, mode);
+
+		expected = params->expected_modes[0](priv->drm);
+		KUNIT_ASSERT_NOT_NULL(test, expected);
+
+		KUNIT_EXPECT_TRUE(test, drm_mode_equal(mode, expected));
+		KUNIT_EXPECT_TRUE(test, mode->type & DRM_MODE_TYPE_PREFERRED);
+	}
+
+	if (params->num_expected_modes >= 2) {
+		mode = list_next_entry(mode, head);
+		KUNIT_ASSERT_NOT_NULL(test, mode);
+
+		expected = params->expected_modes[1](priv->drm);
+		KUNIT_ASSERT_NOT_NULL(test, expected);
+
+		KUNIT_EXPECT_TRUE(test, drm_mode_equal(mode, expected));
+		KUNIT_EXPECT_FALSE(test, mode->type & DRM_MODE_TYPE_PREFERRED);
+	}
+
+	mutex_unlock(&priv->drm->mode_config.mutex);
+}
+
+static const
+struct drm_connector_helper_tv_get_modes_test drm_connector_helper_tv_get_modes_tests[] = {
+	{ .name = "None" },
+	TV_MODE_TEST("PAL",
+		     BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_PAL,
+		     drm_mode_analog_pal_576i),
+	TV_MODE_TEST("NTSC",
+		     BIT(DRM_MODE_TV_MODE_NTSC),
+		     DRM_MODE_TV_MODE_NTSC,
+		     drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST("Both, NTSC Default",
+		     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_NTSC,
+		     drm_mode_analog_ntsc_480i, drm_mode_analog_pal_576i),
+	TV_MODE_TEST("Both, PAL Default",
+		     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_PAL,
+		     drm_mode_analog_pal_576i, drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST_CMDLINE("Both, NTSC Default, with PAL on command-line",
+			     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+			     DRM_MODE_TV_MODE_NTSC,
+			     DRM_MODE_TV_MODE_PAL,
+			     drm_mode_analog_pal_576i, drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST_CMDLINE("Both, PAL Default, with NTSC on command-line",
+			     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+			     DRM_MODE_TV_MODE_PAL,
+			     DRM_MODE_TV_MODE_NTSC,
+			     drm_mode_analog_ntsc_480i, drm_mode_analog_pal_576i),
+};
+
+static void
+drm_connector_helper_tv_get_modes_desc(const struct drm_connector_helper_tv_get_modes_test *t,
+				       char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_helper_tv_get_modes,
+		  drm_connector_helper_tv_get_modes_tests,
+		  drm_connector_helper_tv_get_modes_desc);
+
+static struct kunit_case drm_test_connector_helper_tv_get_modes_tests[] = {
+	KUNIT_CASE_PARAM(drm_test_connector_helper_tv_get_modes_check,
+			 drm_connector_helper_tv_get_modes_gen_params),
+	{ }
+};
+
+static struct kunit_suite drm_test_connector_helper_tv_get_modes_suite = {
+	.name = "drm_connector_helper_tv_get_modes",
+	.init = drm_probe_helper_test_init,
+	.test_cases = drm_test_connector_helper_tv_get_modes_tests,
+};
+
+kunit_test_suite(drm_test_connector_helper_tv_get_modes_suite);
diff --git a/include/drm/drm_probe_helper.h b/include/drm/drm_probe_helper.h
index 5880daa14624..4977e0ab72db 100644
--- a/include/drm/drm_probe_helper.h
+++ b/include/drm/drm_probe_helper.h
@@ -35,5 +35,6 @@ int drm_connector_helper_get_modes_from_ddc(struct drm_connector *connector);
 int drm_connector_helper_get_modes_fixed(struct drm_connector *connector,
 					 const struct drm_display_mode *fixed_mode);
 int drm_connector_helper_get_modes(struct drm_connector *connector);
+int drm_connector_helper_tv_get_modes(struct drm_connector *connector);
 
 #endif

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 18/25] drm/probe-helper: Provide a TV get_modes helper

[Maxime Ripard]

From: Noralf Trønnes <noralf@tronnes.org>

Most of the TV connectors will need a similar get_modes implementation
that will, depending on the drivers' capabilities, register the 480i and
576i modes.

That implementation will also need to set the preferred flag and order
the modes based on the driver and users preferrence.

This is especially important to guarantee that a userspace stack such as
Xorg can start and pick up the preferred mode while maintaining a
working output.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Store a function pointer instead of duplicating the expected mode
- Switch to kunit_test_suite

Changes in v8:
- Remove unused tv_mode_support function
- Add unit tests

Changes in v7:
- Used Noralf's implementation

Changes in v6:
- New patch
---
 drivers/gpu/drm/drm_probe_helper.c            |  82 +++++++++++
 drivers/gpu/drm/tests/Makefile                |   1 +
 drivers/gpu/drm/tests/drm_probe_helper_test.c | 202 ++++++++++++++++++++++++++
 include/drm/drm_probe_helper.h                |   1 +
 4 files changed, 286 insertions(+)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index bcd9611dabfd..1ea053cef557 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -1146,3 +1146,85 @@ int drm_connector_helper_get_modes(struct drm_connector *connector)
 	return count;
 }
 EXPORT_SYMBOL(drm_connector_helper_get_modes);
+
+/**
+ * drm_connector_helper_tv_get_modes - Fills the modes availables to a TV connector
+ * @connector: The connector
+ *
+ * Fills the available modes for a TV connector based on the supported
+ * TV modes, and the default mode expressed by the kernel command line.
+ *
+ * This can be used as the default TV connector helper .get_modes() hook
+ * if the driver does not need any special processing.
+ *
+ * Returns:
+ * The number of modes added to the connector.
+ */
+int drm_connector_helper_tv_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *tv_mode_property =
+		dev->mode_config.tv_mode_property;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	unsigned int ntsc_modes = BIT(DRM_MODE_TV_MODE_NTSC) |
+		BIT(DRM_MODE_TV_MODE_NTSC_443) |
+		BIT(DRM_MODE_TV_MODE_NTSC_J) |
+		BIT(DRM_MODE_TV_MODE_PAL_M);
+	unsigned int pal_modes = BIT(DRM_MODE_TV_MODE_PAL) |
+		BIT(DRM_MODE_TV_MODE_PAL_N) |
+		BIT(DRM_MODE_TV_MODE_SECAM);
+	unsigned int tv_modes[2] = { UINT_MAX, UINT_MAX };
+	unsigned int i, supported_tv_modes = 0;
+
+	if (!tv_mode_property)
+		return 0;
+
+	for (i = 0; i < tv_mode_property->num_values; i++)
+		supported_tv_modes |= BIT(tv_mode_property->values[i]);
+
+	if ((supported_tv_modes & ntsc_modes) &&
+	    (supported_tv_modes & pal_modes)) {
+		uint64_t default_mode;
+
+		if (drm_object_property_get_default_value(&connector->base,
+							  tv_mode_property,
+							  &default_mode))
+			return 0;
+
+		if (cmdline->tv_mode_specified)
+			default_mode = cmdline->tv_mode;
+
+		if (BIT(default_mode) & ntsc_modes) {
+			tv_modes[0] = DRM_MODE_TV_MODE_NTSC;
+			tv_modes[1] = DRM_MODE_TV_MODE_PAL;
+		} else {
+			tv_modes[0] = DRM_MODE_TV_MODE_PAL;
+			tv_modes[1] = DRM_MODE_TV_MODE_NTSC;
+		}
+	} else if (supported_tv_modes & ntsc_modes) {
+		tv_modes[0] = DRM_MODE_TV_MODE_NTSC;
+	} else if (supported_tv_modes & pal_modes) {
+		tv_modes[0] = DRM_MODE_TV_MODE_PAL;
+	} else {
+		return 0;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
+		struct drm_display_mode *mode;
+
+		if (tv_modes[i] == DRM_MODE_TV_MODE_NTSC)
+			mode = drm_mode_analog_ntsc_480i(dev);
+		else if (tv_modes[i] == DRM_MODE_TV_MODE_PAL)
+			mode = drm_mode_analog_pal_576i(dev);
+		else
+			break;
+		if (!mode)
+			return i;
+		if (!i)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+		drm_mode_probed_add(connector, mode);
+	}
+
+	return i;
+}
+EXPORT_SYMBOL(drm_connector_helper_tv_get_modes);
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index c7903c112c65..94fe546d937d 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -13,4 +13,5 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_mm_test.o \
 	drm_modes_test.o \
 	drm_plane_helper_test.o \
+	drm_probe_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_probe_helper_test.c b/drivers/gpu/drm/tests/drm_probe_helper_test.c
new file mode 100644
index 000000000000..a875ca0a76da
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_probe_helper_test.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_probe_helper functions
+ */
+
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_device.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_mode.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include <kunit/test.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_probe_helper_test_priv {
+	struct drm_device *drm;
+	struct drm_connector connector;
+};
+
+static const struct drm_connector_helper_funcs drm_probe_helper_connector_helper_funcs = {
+};
+
+static const struct drm_connector_funcs drm_probe_helper_connector_funcs = {
+	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
+	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
+	.reset			= drm_atomic_helper_connector_reset,
+};
+
+static int drm_probe_helper_test_init(struct kunit *test)
+{
+	struct drm_probe_helper_test_priv *priv;
+	struct drm_connector *connector;
+	int ret;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+	test->priv = priv;
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET | DRIVER_ATOMIC,
+					  "drm-probe-helper-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	connector = &priv->connector;
+	ret = drmm_connector_init(priv->drm, connector,
+				  &drm_probe_helper_connector_funcs,
+				  DRM_MODE_CONNECTOR_Unknown,
+				  NULL);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_connector_helper_add(connector, &drm_probe_helper_connector_helper_funcs);
+
+	return 0;
+}
+
+typedef struct drm_display_mode *(*expected_mode_func_t)(struct drm_device *);
+
+struct drm_connector_helper_tv_get_modes_test {
+	const char *name;
+	unsigned int supported_tv_modes;
+	enum drm_connector_tv_mode default_mode;
+	bool cmdline;
+	enum drm_connector_tv_mode cmdline_mode;
+	expected_mode_func_t *expected_modes;
+	unsigned int num_expected_modes;
+};
+
+#define _TV_MODE_TEST(_name, _supported, _default, _cmdline, _cmdline_mode, ...) 		\
+	{											\
+		.name = _name,									\
+		.supported_tv_modes = _supported,						\
+		.default_mode = _default,							\
+		.cmdline = _cmdline,								\
+		.cmdline_mode = _cmdline_mode,							\
+		.expected_modes = (expected_mode_func_t[]) { __VA_ARGS__ }, 			\
+		.num_expected_modes = sizeof((expected_mode_func_t[]) { __VA_ARGS__ }) /	\
+				      (sizeof(expected_mode_func_t)),				\
+	}
+
+#define TV_MODE_TEST(_name, _supported, _default, ...)			\
+	_TV_MODE_TEST(_name, _supported, _default, false, 0, __VA_ARGS__)
+
+#define TV_MODE_TEST_CMDLINE(_name, _supported, _default, _cmdline, ...) \
+	_TV_MODE_TEST(_name, _supported, _default, true, _cmdline, __VA_ARGS__)
+
+static void
+drm_test_connector_helper_tv_get_modes_check(struct kunit *test)
+{
+	const struct drm_connector_helper_tv_get_modes_test *params = test->param_value;
+	struct drm_probe_helper_test_priv *priv = test->priv;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	struct drm_display_mode *mode;
+	const struct drm_display_mode *expected;
+	size_t len;
+	int ret;
+
+	if (params->cmdline) {
+		cmdline->tv_mode_specified = true;
+		cmdline->tv_mode = params->cmdline_mode;
+	}
+
+	ret = drm_mode_create_tv_properties(priv->drm, params->supported_tv_modes);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_object_attach_property(&connector->base,
+				   priv->drm->mode_config.tv_mode_property,
+		 		   params->default_mode);
+
+	mutex_lock(&priv->drm->mode_config.mutex);
+
+	ret = drm_connector_helper_tv_get_modes(connector);
+	KUNIT_EXPECT_EQ(test, ret, params->num_expected_modes);
+
+	list_for_each_entry(mode, &connector->probed_modes, head)
+		len++;
+	KUNIT_EXPECT_EQ(test, len, params->num_expected_modes);
+
+	if (params->num_expected_modes >= 1) {
+		mode = list_first_entry_or_null(&connector->probed_modes,
+						struct drm_display_mode, head);
+		KUNIT_ASSERT_NOT_NULL(test, mode);
+
+		expected = params->expected_modes[0](priv->drm);
+		KUNIT_ASSERT_NOT_NULL(test, expected);
+
+		KUNIT_EXPECT_TRUE(test, drm_mode_equal(mode, expected));
+		KUNIT_EXPECT_TRUE(test, mode->type & DRM_MODE_TYPE_PREFERRED);
+	}
+
+	if (params->num_expected_modes >= 2) {
+		mode = list_next_entry(mode, head);
+		KUNIT_ASSERT_NOT_NULL(test, mode);
+
+		expected = params->expected_modes[1](priv->drm);
+		KUNIT_ASSERT_NOT_NULL(test, expected);
+
+		KUNIT_EXPECT_TRUE(test, drm_mode_equal(mode, expected));
+		KUNIT_EXPECT_FALSE(test, mode->type & DRM_MODE_TYPE_PREFERRED);
+	}
+
+	mutex_unlock(&priv->drm->mode_config.mutex);
+}
+
+static const
+struct drm_connector_helper_tv_get_modes_test drm_connector_helper_tv_get_modes_tests[] = {
+	{ .name = "None" },
+	TV_MODE_TEST("PAL",
+		     BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_PAL,
+		     drm_mode_analog_pal_576i),
+	TV_MODE_TEST("NTSC",
+		     BIT(DRM_MODE_TV_MODE_NTSC),
+		     DRM_MODE_TV_MODE_NTSC,
+		     drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST("Both, NTSC Default",
+		     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_NTSC,
+		     drm_mode_analog_ntsc_480i, drm_mode_analog_pal_576i),
+	TV_MODE_TEST("Both, PAL Default",
+		     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_PAL,
+		     drm_mode_analog_pal_576i, drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST_CMDLINE("Both, NTSC Default, with PAL on command-line",
+			     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+			     DRM_MODE_TV_MODE_NTSC,
+			     DRM_MODE_TV_MODE_PAL,
+			     drm_mode_analog_pal_576i, drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST_CMDLINE("Both, PAL Default, with NTSC on command-line",
+			     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+			     DRM_MODE_TV_MODE_PAL,
+			     DRM_MODE_TV_MODE_NTSC,
+			     drm_mode_analog_ntsc_480i, drm_mode_analog_pal_576i),
+};
+
+static void
+drm_connector_helper_tv_get_modes_desc(const struct drm_connector_helper_tv_get_modes_test *t,
+				       char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_helper_tv_get_modes,
+		  drm_connector_helper_tv_get_modes_tests,
+		  drm_connector_helper_tv_get_modes_desc);
+
+static struct kunit_case drm_test_connector_helper_tv_get_modes_tests[] = {
+	KUNIT_CASE_PARAM(drm_test_connector_helper_tv_get_modes_check,
+			 drm_connector_helper_tv_get_modes_gen_params),
+	{ }
+};
+
+static struct kunit_suite drm_test_connector_helper_tv_get_modes_suite = {
+	.name = "drm_connector_helper_tv_get_modes",
+	.init = drm_probe_helper_test_init,
+	.test_cases = drm_test_connector_helper_tv_get_modes_tests,
+};
+
+kunit_test_suite(drm_test_connector_helper_tv_get_modes_suite);
diff --git a/include/drm/drm_probe_helper.h b/include/drm/drm_probe_helper.h
index 5880daa14624..4977e0ab72db 100644
--- a/include/drm/drm_probe_helper.h
+++ b/include/drm/drm_probe_helper.h
@@ -35,5 +35,6 @@ int drm_connector_helper_get_modes_from_ddc(struct drm_connector *connector);
 int drm_connector_helper_get_modes_fixed(struct drm_connector *connector,
 					 const struct drm_display_mode *fixed_mode);
 int drm_connector_helper_get_modes(struct drm_connector *connector);
+int drm_connector_helper_tv_get_modes(struct drm_connector *connector);
 
 #endif

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 18/25] drm/probe-helper: Provide a TV get_modes helper

[Maxime Ripard]

From: Noralf Trønnes <noralf@tronnes.org>

Most of the TV connectors will need a similar get_modes implementation
that will, depending on the drivers' capabilities, register the 480i and
576i modes.

That implementation will also need to set the preferred flag and order
the modes based on the driver and users preferrence.

This is especially important to guarantee that a userspace stack such as
Xorg can start and pick up the preferred mode while maintaining a
working output.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v9:
- Store a function pointer instead of duplicating the expected mode
- Switch to kunit_test_suite

Changes in v8:
- Remove unused tv_mode_support function
- Add unit tests

Changes in v7:
- Used Noralf's implementation

Changes in v6:
- New patch
---
 drivers/gpu/drm/drm_probe_helper.c            |  82 +++++++++++
 drivers/gpu/drm/tests/Makefile                |   1 +
 drivers/gpu/drm/tests/drm_probe_helper_test.c | 202 ++++++++++++++++++++++++++
 include/drm/drm_probe_helper.h                |   1 +
 4 files changed, 286 insertions(+)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index bcd9611dabfd..1ea053cef557 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -1146,3 +1146,85 @@ int drm_connector_helper_get_modes(struct drm_connector *connector)
 	return count;
 }
 EXPORT_SYMBOL(drm_connector_helper_get_modes);
+
+/**
+ * drm_connector_helper_tv_get_modes - Fills the modes availables to a TV connector
+ * @connector: The connector
+ *
+ * Fills the available modes for a TV connector based on the supported
+ * TV modes, and the default mode expressed by the kernel command line.
+ *
+ * This can be used as the default TV connector helper .get_modes() hook
+ * if the driver does not need any special processing.
+ *
+ * Returns:
+ * The number of modes added to the connector.
+ */
+int drm_connector_helper_tv_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *tv_mode_property =
+		dev->mode_config.tv_mode_property;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	unsigned int ntsc_modes = BIT(DRM_MODE_TV_MODE_NTSC) |
+		BIT(DRM_MODE_TV_MODE_NTSC_443) |
+		BIT(DRM_MODE_TV_MODE_NTSC_J) |
+		BIT(DRM_MODE_TV_MODE_PAL_M);
+	unsigned int pal_modes = BIT(DRM_MODE_TV_MODE_PAL) |
+		BIT(DRM_MODE_TV_MODE_PAL_N) |
+		BIT(DRM_MODE_TV_MODE_SECAM);
+	unsigned int tv_modes[2] = { UINT_MAX, UINT_MAX };
+	unsigned int i, supported_tv_modes = 0;
+
+	if (!tv_mode_property)
+		return 0;
+
+	for (i = 0; i < tv_mode_property->num_values; i++)
+		supported_tv_modes |= BIT(tv_mode_property->values[i]);
+
+	if ((supported_tv_modes & ntsc_modes) &&
+	    (supported_tv_modes & pal_modes)) {
+		uint64_t default_mode;
+
+		if (drm_object_property_get_default_value(&connector->base,
+							  tv_mode_property,
+							  &default_mode))
+			return 0;
+
+		if (cmdline->tv_mode_specified)
+			default_mode = cmdline->tv_mode;
+
+		if (BIT(default_mode) & ntsc_modes) {
+			tv_modes[0] = DRM_MODE_TV_MODE_NTSC;
+			tv_modes[1] = DRM_MODE_TV_MODE_PAL;
+		} else {
+			tv_modes[0] = DRM_MODE_TV_MODE_PAL;
+			tv_modes[1] = DRM_MODE_TV_MODE_NTSC;
+		}
+	} else if (supported_tv_modes & ntsc_modes) {
+		tv_modes[0] = DRM_MODE_TV_MODE_NTSC;
+	} else if (supported_tv_modes & pal_modes) {
+		tv_modes[0] = DRM_MODE_TV_MODE_PAL;
+	} else {
+		return 0;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
+		struct drm_display_mode *mode;
+
+		if (tv_modes[i] == DRM_MODE_TV_MODE_NTSC)
+			mode = drm_mode_analog_ntsc_480i(dev);
+		else if (tv_modes[i] == DRM_MODE_TV_MODE_PAL)
+			mode = drm_mode_analog_pal_576i(dev);
+		else
+			break;
+		if (!mode)
+			return i;
+		if (!i)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+		drm_mode_probed_add(connector, mode);
+	}
+
+	return i;
+}
+EXPORT_SYMBOL(drm_connector_helper_tv_get_modes);
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index c7903c112c65..94fe546d937d 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -13,4 +13,5 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_mm_test.o \
 	drm_modes_test.o \
 	drm_plane_helper_test.o \
+	drm_probe_helper_test.o \
 	drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_probe_helper_test.c b/drivers/gpu/drm/tests/drm_probe_helper_test.c
new file mode 100644
index 000000000000..a875ca0a76da
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_probe_helper_test.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_probe_helper functions
+ */
+
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_device.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_mode.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include <kunit/test.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_probe_helper_test_priv {
+	struct drm_device *drm;
+	struct drm_connector connector;
+};
+
+static const struct drm_connector_helper_funcs drm_probe_helper_connector_helper_funcs = {
+};
+
+static const struct drm_connector_funcs drm_probe_helper_connector_funcs = {
+	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
+	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
+	.reset			= drm_atomic_helper_connector_reset,
+};
+
+static int drm_probe_helper_test_init(struct kunit *test)
+{
+	struct drm_probe_helper_test_priv *priv;
+	struct drm_connector *connector;
+	int ret;
+
+	priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+	test->priv = priv;
+
+	priv->drm = drm_kunit_device_init(test, DRIVER_MODESET | DRIVER_ATOMIC,
+					  "drm-probe-helper-test");
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+	connector = &priv->connector;
+	ret = drmm_connector_init(priv->drm, connector,
+				  &drm_probe_helper_connector_funcs,
+				  DRM_MODE_CONNECTOR_Unknown,
+				  NULL);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_connector_helper_add(connector, &drm_probe_helper_connector_helper_funcs);
+
+	return 0;
+}
+
+typedef struct drm_display_mode *(*expected_mode_func_t)(struct drm_device *);
+
+struct drm_connector_helper_tv_get_modes_test {
+	const char *name;
+	unsigned int supported_tv_modes;
+	enum drm_connector_tv_mode default_mode;
+	bool cmdline;
+	enum drm_connector_tv_mode cmdline_mode;
+	expected_mode_func_t *expected_modes;
+	unsigned int num_expected_modes;
+};
+
+#define _TV_MODE_TEST(_name, _supported, _default, _cmdline, _cmdline_mode, ...) 		\
+	{											\
+		.name = _name,									\
+		.supported_tv_modes = _supported,						\
+		.default_mode = _default,							\
+		.cmdline = _cmdline,								\
+		.cmdline_mode = _cmdline_mode,							\
+		.expected_modes = (expected_mode_func_t[]) { __VA_ARGS__ }, 			\
+		.num_expected_modes = sizeof((expected_mode_func_t[]) { __VA_ARGS__ }) /	\
+				      (sizeof(expected_mode_func_t)),				\
+	}
+
+#define TV_MODE_TEST(_name, _supported, _default, ...)			\
+	_TV_MODE_TEST(_name, _supported, _default, false, 0, __VA_ARGS__)
+
+#define TV_MODE_TEST_CMDLINE(_name, _supported, _default, _cmdline, ...) \
+	_TV_MODE_TEST(_name, _supported, _default, true, _cmdline, __VA_ARGS__)
+
+static void
+drm_test_connector_helper_tv_get_modes_check(struct kunit *test)
+{
+	const struct drm_connector_helper_tv_get_modes_test *params = test->param_value;
+	struct drm_probe_helper_test_priv *priv = test->priv;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	struct drm_display_mode *mode;
+	const struct drm_display_mode *expected;
+	size_t len;
+	int ret;
+
+	if (params->cmdline) {
+		cmdline->tv_mode_specified = true;
+		cmdline->tv_mode = params->cmdline_mode;
+	}
+
+	ret = drm_mode_create_tv_properties(priv->drm, params->supported_tv_modes);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_object_attach_property(&connector->base,
+				   priv->drm->mode_config.tv_mode_property,
+		 		   params->default_mode);
+
+	mutex_lock(&priv->drm->mode_config.mutex);
+
+	ret = drm_connector_helper_tv_get_modes(connector);
+	KUNIT_EXPECT_EQ(test, ret, params->num_expected_modes);
+
+	list_for_each_entry(mode, &connector->probed_modes, head)
+		len++;
+	KUNIT_EXPECT_EQ(test, len, params->num_expected_modes);
+
+	if (params->num_expected_modes >= 1) {
+		mode = list_first_entry_or_null(&connector->probed_modes,
+						struct drm_display_mode, head);
+		KUNIT_ASSERT_NOT_NULL(test, mode);
+
+		expected = params->expected_modes[0](priv->drm);
+		KUNIT_ASSERT_NOT_NULL(test, expected);
+
+		KUNIT_EXPECT_TRUE(test, drm_mode_equal(mode, expected));
+		KUNIT_EXPECT_TRUE(test, mode->type & DRM_MODE_TYPE_PREFERRED);
+	}
+
+	if (params->num_expected_modes >= 2) {
+		mode = list_next_entry(mode, head);
+		KUNIT_ASSERT_NOT_NULL(test, mode);
+
+		expected = params->expected_modes[1](priv->drm);
+		KUNIT_ASSERT_NOT_NULL(test, expected);
+
+		KUNIT_EXPECT_TRUE(test, drm_mode_equal(mode, expected));
+		KUNIT_EXPECT_FALSE(test, mode->type & DRM_MODE_TYPE_PREFERRED);
+	}
+
+	mutex_unlock(&priv->drm->mode_config.mutex);
+}
+
+static const
+struct drm_connector_helper_tv_get_modes_test drm_connector_helper_tv_get_modes_tests[] = {
+	{ .name = "None" },
+	TV_MODE_TEST("PAL",
+		     BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_PAL,
+		     drm_mode_analog_pal_576i),
+	TV_MODE_TEST("NTSC",
+		     BIT(DRM_MODE_TV_MODE_NTSC),
+		     DRM_MODE_TV_MODE_NTSC,
+		     drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST("Both, NTSC Default",
+		     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_NTSC,
+		     drm_mode_analog_ntsc_480i, drm_mode_analog_pal_576i),
+	TV_MODE_TEST("Both, PAL Default",
+		     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+		     DRM_MODE_TV_MODE_PAL,
+		     drm_mode_analog_pal_576i, drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST_CMDLINE("Both, NTSC Default, with PAL on command-line",
+			     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+			     DRM_MODE_TV_MODE_NTSC,
+			     DRM_MODE_TV_MODE_PAL,
+			     drm_mode_analog_pal_576i, drm_mode_analog_ntsc_480i),
+	TV_MODE_TEST_CMDLINE("Both, PAL Default, with NTSC on command-line",
+			     BIT(DRM_MODE_TV_MODE_NTSC) | BIT(DRM_MODE_TV_MODE_PAL),
+			     DRM_MODE_TV_MODE_PAL,
+			     DRM_MODE_TV_MODE_NTSC,
+			     drm_mode_analog_ntsc_480i, drm_mode_analog_pal_576i),
+};
+
+static void
+drm_connector_helper_tv_get_modes_desc(const struct drm_connector_helper_tv_get_modes_test *t,
+				       char *desc)
+{
+	sprintf(desc, "%s", t->name);
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_helper_tv_get_modes,
+		  drm_connector_helper_tv_get_modes_tests,
+		  drm_connector_helper_tv_get_modes_desc);
+
+static struct kunit_case drm_test_connector_helper_tv_get_modes_tests[] = {
+	KUNIT_CASE_PARAM(drm_test_connector_helper_tv_get_modes_check,
+			 drm_connector_helper_tv_get_modes_gen_params),
+	{ }
+};
+
+static struct kunit_suite drm_test_connector_helper_tv_get_modes_suite = {
+	.name = "drm_connector_helper_tv_get_modes",
+	.init = drm_probe_helper_test_init,
+	.test_cases = drm_test_connector_helper_tv_get_modes_tests,
+};
+
+kunit_test_suite(drm_test_connector_helper_tv_get_modes_suite);
diff --git a/include/drm/drm_probe_helper.h b/include/drm/drm_probe_helper.h
index 5880daa14624..4977e0ab72db 100644
--- a/include/drm/drm_probe_helper.h
+++ b/include/drm/drm_probe_helper.h
@@ -35,5 +35,6 @@ int drm_connector_helper_get_modes_from_ddc(struct drm_connector *connector);
 int drm_connector_helper_get_modes_fixed(struct drm_connector *connector,
 					 const struct drm_display_mode *fixed_mode);
 int drm_connector_helper_get_modes(struct drm_connector *connector);
+int drm_connector_helper_tv_get_modes(struct drm_connector *connector);
 
 #endif

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 19/25] drm/atomic-helper: Add a TV properties reset helper

[Maxime Ripard]

The drm_tv_create_properties() function will create a bunch of properties,
but it's up to each and every driver using that function to properly reset
the state of these properties leading to inconsistent behaviours.

Let's create a helper that will take care of it.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Use tv_mode_specified instead of a !0 tv_mode to set the default
---
 drivers/gpu/drm/drm_atomic_state_helper.c | 75 +++++++++++++++++++++++++++++++
 include/drm/drm_atomic_state_helper.h     |  1 +
 2 files changed, 76 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index dfb57217253b..e1fc3f26340a 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -481,6 +481,81 @@ void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connecto
 }
 EXPORT_SYMBOL(drm_atomic_helper_connector_tv_margins_reset);
 
+/**
+ * drm_atomic_helper_connector_tv_reset - Resets Analog TV connector properties
+ * @connector: DRM connector
+ *
+ * Resets the analog TV properties attached to a connector
+ */
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	struct drm_connector_state *state = connector->state;
+	struct drm_property *prop;
+	uint64_t val;
+
+	prop = dev->mode_config.tv_mode_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.mode = val;
+
+	if (cmdline->tv_mode_specified)
+		state->tv.mode = cmdline->tv_mode;
+
+	prop = dev->mode_config.tv_select_subconnector_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.select_subconnector = val;
+
+	prop = dev->mode_config.tv_subconnector_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.subconnector = val;
+
+	prop = dev->mode_config.tv_brightness_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.brightness = val;
+
+	prop = dev->mode_config.tv_contrast_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.contrast = val;
+
+	prop = dev->mode_config.tv_flicker_reduction_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.flicker_reduction = val;
+
+	prop = dev->mode_config.tv_overscan_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.overscan = val;
+
+	prop = dev->mode_config.tv_saturation_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.saturation = val;
+
+	prop = dev->mode_config.tv_hue_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.hue = val;
+
+	drm_atomic_helper_connector_tv_margins_reset(connector);
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
+
 /**
  * __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
  * @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index 192766656b88..c8fbce795ee7 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -70,6 +70,7 @@ void __drm_atomic_helper_connector_state_reset(struct drm_connector_state *conn_
 void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
 					 struct drm_connector_state *conn_state);
 void drm_atomic_helper_connector_reset(struct drm_connector *connector);
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
 void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connector);
 void
 __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 19/25] drm/atomic-helper: Add a TV properties reset helper

[Maxime Ripard]

The drm_tv_create_properties() function will create a bunch of properties,
but it's up to each and every driver using that function to properly reset
the state of these properties leading to inconsistent behaviours.

Let's create a helper that will take care of it.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Use tv_mode_specified instead of a !0 tv_mode to set the default
---
 drivers/gpu/drm/drm_atomic_state_helper.c | 75 +++++++++++++++++++++++++++++++
 include/drm/drm_atomic_state_helper.h     |  1 +
 2 files changed, 76 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index dfb57217253b..e1fc3f26340a 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -481,6 +481,81 @@ void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connecto
 }
 EXPORT_SYMBOL(drm_atomic_helper_connector_tv_margins_reset);
 
+/**
+ * drm_atomic_helper_connector_tv_reset - Resets Analog TV connector properties
+ * @connector: DRM connector
+ *
+ * Resets the analog TV properties attached to a connector
+ */
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	struct drm_connector_state *state = connector->state;
+	struct drm_property *prop;
+	uint64_t val;
+
+	prop = dev->mode_config.tv_mode_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.mode = val;
+
+	if (cmdline->tv_mode_specified)
+		state->tv.mode = cmdline->tv_mode;
+
+	prop = dev->mode_config.tv_select_subconnector_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.select_subconnector = val;
+
+	prop = dev->mode_config.tv_subconnector_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.subconnector = val;
+
+	prop = dev->mode_config.tv_brightness_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.brightness = val;
+
+	prop = dev->mode_config.tv_contrast_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.contrast = val;
+
+	prop = dev->mode_config.tv_flicker_reduction_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.flicker_reduction = val;
+
+	prop = dev->mode_config.tv_overscan_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.overscan = val;
+
+	prop = dev->mode_config.tv_saturation_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.saturation = val;
+
+	prop = dev->mode_config.tv_hue_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.hue = val;
+
+	drm_atomic_helper_connector_tv_margins_reset(connector);
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
+
 /**
  * __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
  * @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index 192766656b88..c8fbce795ee7 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -70,6 +70,7 @@ void __drm_atomic_helper_connector_state_reset(struct drm_connector_state *conn_
 void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
 					 struct drm_connector_state *conn_state);
 void drm_atomic_helper_connector_reset(struct drm_connector *connector);
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
 void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connector);
 void
 __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 19/25] drm/atomic-helper: Add a TV properties reset helper

[Maxime Ripard]

The drm_tv_create_properties() function will create a bunch of properties,
but it's up to each and every driver using that function to properly reset
the state of these properties leading to inconsistent behaviours.

Let's create a helper that will take care of it.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Use tv_mode_specified instead of a !0 tv_mode to set the default
---
 drivers/gpu/drm/drm_atomic_state_helper.c | 75 +++++++++++++++++++++++++++++++
 include/drm/drm_atomic_state_helper.h     |  1 +
 2 files changed, 76 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index dfb57217253b..e1fc3f26340a 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -481,6 +481,81 @@ void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connecto
 }
 EXPORT_SYMBOL(drm_atomic_helper_connector_tv_margins_reset);
 
+/**
+ * drm_atomic_helper_connector_tv_reset - Resets Analog TV connector properties
+ * @connector: DRM connector
+ *
+ * Resets the analog TV properties attached to a connector
+ */
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	struct drm_connector_state *state = connector->state;
+	struct drm_property *prop;
+	uint64_t val;
+
+	prop = dev->mode_config.tv_mode_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.mode = val;
+
+	if (cmdline->tv_mode_specified)
+		state->tv.mode = cmdline->tv_mode;
+
+	prop = dev->mode_config.tv_select_subconnector_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.select_subconnector = val;
+
+	prop = dev->mode_config.tv_subconnector_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.subconnector = val;
+
+	prop = dev->mode_config.tv_brightness_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.brightness = val;
+
+	prop = dev->mode_config.tv_contrast_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.contrast = val;
+
+	prop = dev->mode_config.tv_flicker_reduction_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.flicker_reduction = val;
+
+	prop = dev->mode_config.tv_overscan_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.overscan = val;
+
+	prop = dev->mode_config.tv_saturation_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.saturation = val;
+
+	prop = dev->mode_config.tv_hue_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.hue = val;
+
+	drm_atomic_helper_connector_tv_margins_reset(connector);
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
+
 /**
  * __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
  * @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index 192766656b88..c8fbce795ee7 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -70,6 +70,7 @@ void __drm_atomic_helper_connector_state_reset(struct drm_connector_state *conn_
 void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
 					 struct drm_connector_state *conn_state);
 void drm_atomic_helper_connector_reset(struct drm_connector *connector);
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
 void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connector);
 void
 __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 19/25] drm/atomic-helper: Add a TV properties reset helper

[Maxime Ripard]

The drm_tv_create_properties() function will create a bunch of properties,
but it's up to each and every driver using that function to properly reset
the state of these properties leading to inconsistent behaviours.

Let's create a helper that will take care of it.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Use tv_mode_specified instead of a !0 tv_mode to set the default
---
 drivers/gpu/drm/drm_atomic_state_helper.c | 75 +++++++++++++++++++++++++++++++
 include/drm/drm_atomic_state_helper.h     |  1 +
 2 files changed, 76 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index dfb57217253b..e1fc3f26340a 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -481,6 +481,81 @@ void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connecto
 }
 EXPORT_SYMBOL(drm_atomic_helper_connector_tv_margins_reset);
 
+/**
+ * drm_atomic_helper_connector_tv_reset - Resets Analog TV connector properties
+ * @connector: DRM connector
+ *
+ * Resets the analog TV properties attached to a connector
+ */
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	struct drm_connector_state *state = connector->state;
+	struct drm_property *prop;
+	uint64_t val;
+
+	prop = dev->mode_config.tv_mode_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.mode = val;
+
+	if (cmdline->tv_mode_specified)
+		state->tv.mode = cmdline->tv_mode;
+
+	prop = dev->mode_config.tv_select_subconnector_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.select_subconnector = val;
+
+	prop = dev->mode_config.tv_subconnector_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.subconnector = val;
+
+	prop = dev->mode_config.tv_brightness_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.brightness = val;
+
+	prop = dev->mode_config.tv_contrast_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.contrast = val;
+
+	prop = dev->mode_config.tv_flicker_reduction_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.flicker_reduction = val;
+
+	prop = dev->mode_config.tv_overscan_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.overscan = val;
+
+	prop = dev->mode_config.tv_saturation_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.saturation = val;
+
+	prop = dev->mode_config.tv_hue_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.hue = val;
+
+	drm_atomic_helper_connector_tv_margins_reset(connector);
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
+
 /**
  * __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
  * @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index 192766656b88..c8fbce795ee7 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -70,6 +70,7 @@ void __drm_atomic_helper_connector_state_reset(struct drm_connector_state *conn_
 void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
 					 struct drm_connector_state *conn_state);
 void drm_atomic_helper_connector_reset(struct drm_connector *connector);
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
 void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connector);
 void
 __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 19/25] drm/atomic-helper: Add a TV properties reset helper

[Maxime Ripard]

The drm_tv_create_properties() function will create a bunch of properties,
but it's up to each and every driver using that function to properly reset
the state of these properties leading to inconsistent behaviours.

Let's create a helper that will take care of it.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Use tv_mode_specified instead of a !0 tv_mode to set the default
---
 drivers/gpu/drm/drm_atomic_state_helper.c | 75 +++++++++++++++++++++++++++++++
 include/drm/drm_atomic_state_helper.h     |  1 +
 2 files changed, 76 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index dfb57217253b..e1fc3f26340a 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -481,6 +481,81 @@ void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connecto
 }
 EXPORT_SYMBOL(drm_atomic_helper_connector_tv_margins_reset);
 
+/**
+ * drm_atomic_helper_connector_tv_reset - Resets Analog TV connector properties
+ * @connector: DRM connector
+ *
+ * Resets the analog TV properties attached to a connector
+ */
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+	struct drm_connector_state *state = connector->state;
+	struct drm_property *prop;
+	uint64_t val;
+
+	prop = dev->mode_config.tv_mode_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.mode = val;
+
+	if (cmdline->tv_mode_specified)
+		state->tv.mode = cmdline->tv_mode;
+
+	prop = dev->mode_config.tv_select_subconnector_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.select_subconnector = val;
+
+	prop = dev->mode_config.tv_subconnector_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.subconnector = val;
+
+	prop = dev->mode_config.tv_brightness_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.brightness = val;
+
+	prop = dev->mode_config.tv_contrast_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.contrast = val;
+
+	prop = dev->mode_config.tv_flicker_reduction_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.flicker_reduction = val;
+
+	prop = dev->mode_config.tv_overscan_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.overscan = val;
+
+	prop = dev->mode_config.tv_saturation_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.saturation = val;
+
+	prop = dev->mode_config.tv_hue_property;
+	if (prop)
+		if (!drm_object_property_get_default_value(&connector->base,
+							   prop, &val))
+			state->tv.hue = val;
+
+	drm_atomic_helper_connector_tv_margins_reset(connector);
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
+
 /**
  * __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
  * @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index 192766656b88..c8fbce795ee7 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -70,6 +70,7 @@ void __drm_atomic_helper_connector_state_reset(struct drm_connector_state *conn_
 void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
 					 struct drm_connector_state *conn_state);
 void drm_atomic_helper_connector_reset(struct drm_connector *connector);
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
 void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connector);
 void
 __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 20/25] drm/atomic-helper: Add an analog TV atomic_check implementation

[Maxime Ripard]

The analog TV connector drivers share some atomic_check logic, and the new
TV standard property have created some boilerplate that can be be shared
across drivers too.

Let's create an atomic_check helper for those use cases.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_atomic_state_helper.c | 49 +++++++++++++++++++++++++++++++
 include/drm/drm_atomic_state_helper.h     |  3 ++
 2 files changed, 52 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index e1fc3f26340a..3a467013c656 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -556,6 +556,55 @@ void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
 }
 EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
 
+/**
+ * @drm_atomic_helper_connector_tv_check: Validate an analog TV connector state
+ * @connector: DRM Connector
+ * @state: the DRM State object
+ *
+ * Checks the state object to see if the requested state is valid for an
+ * analog TV connector.
+ *
+ * Returns:
+ * Zero for success, a negative error code on error.
+ */
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+					 struct drm_atomic_state *state)
+{
+	struct drm_connector_state *old_conn_state =
+		drm_atomic_get_old_connector_state(state, connector);
+	struct drm_connector_state *new_conn_state =
+		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+
+	crtc = new_conn_state->crtc;
+	if (!crtc)
+		return 0;
+
+	crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+	if (!crtc_state)
+		return -EINVAL;
+
+	if (old_conn_state->tv.mode != new_conn_state->tv.mode)
+		crtc_state->mode_changed = true;
+
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))
+		crtc_state->connectors_changed = true;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_check);
+
 /**
  * __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
  * @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index c8fbce795ee7..b9740edb2658 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -26,6 +26,7 @@
 
 #include <linux/types.h>
 
+struct drm_atomic_state;
 struct drm_bridge;
 struct drm_bridge_state;
 struct drm_crtc;
@@ -71,6 +72,8 @@ void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
 					 struct drm_connector_state *conn_state);
 void drm_atomic_helper_connector_reset(struct drm_connector *connector);
 void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+					 struct drm_atomic_state *state);
 void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connector);
 void
 __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 20/25] drm/atomic-helper: Add an analog TV atomic_check implementation

[Maxime Ripard]

The analog TV connector drivers share some atomic_check logic, and the new
TV standard property have created some boilerplate that can be be shared
across drivers too.

Let's create an atomic_check helper for those use cases.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_atomic_state_helper.c | 49 +++++++++++++++++++++++++++++++
 include/drm/drm_atomic_state_helper.h     |  3 ++
 2 files changed, 52 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index e1fc3f26340a..3a467013c656 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -556,6 +556,55 @@ void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
 }
 EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
 
+/**
+ * @drm_atomic_helper_connector_tv_check: Validate an analog TV connector state
+ * @connector: DRM Connector
+ * @state: the DRM State object
+ *
+ * Checks the state object to see if the requested state is valid for an
+ * analog TV connector.
+ *
+ * Returns:
+ * Zero for success, a negative error code on error.
+ */
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+					 struct drm_atomic_state *state)
+{
+	struct drm_connector_state *old_conn_state =
+		drm_atomic_get_old_connector_state(state, connector);
+	struct drm_connector_state *new_conn_state =
+		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+
+	crtc = new_conn_state->crtc;
+	if (!crtc)
+		return 0;
+
+	crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+	if (!crtc_state)
+		return -EINVAL;
+
+	if (old_conn_state->tv.mode != new_conn_state->tv.mode)
+		crtc_state->mode_changed = true;
+
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))
+		crtc_state->connectors_changed = true;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_check);
+
 /**
  * __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
  * @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index c8fbce795ee7..b9740edb2658 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -26,6 +26,7 @@
 
 #include <linux/types.h>
 
+struct drm_atomic_state;
 struct drm_bridge;
 struct drm_bridge_state;
 struct drm_crtc;
@@ -71,6 +72,8 @@ void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
 					 struct drm_connector_state *conn_state);
 void drm_atomic_helper_connector_reset(struct drm_connector *connector);
 void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+					 struct drm_atomic_state *state);
 void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connector);
 void
 __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 20/25] drm/atomic-helper: Add an analog TV atomic_check implementation

[Maxime Ripard]

The analog TV connector drivers share some atomic_check logic, and the new
TV standard property have created some boilerplate that can be be shared
across drivers too.

Let's create an atomic_check helper for those use cases.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_atomic_state_helper.c | 49 +++++++++++++++++++++++++++++++
 include/drm/drm_atomic_state_helper.h     |  3 ++
 2 files changed, 52 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index e1fc3f26340a..3a467013c656 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -556,6 +556,55 @@ void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
 }
 EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
 
+/**
+ * @drm_atomic_helper_connector_tv_check: Validate an analog TV connector state
+ * @connector: DRM Connector
+ * @state: the DRM State object
+ *
+ * Checks the state object to see if the requested state is valid for an
+ * analog TV connector.
+ *
+ * Returns:
+ * Zero for success, a negative error code on error.
+ */
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+					 struct drm_atomic_state *state)
+{
+	struct drm_connector_state *old_conn_state =
+		drm_atomic_get_old_connector_state(state, connector);
+	struct drm_connector_state *new_conn_state =
+		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+
+	crtc = new_conn_state->crtc;
+	if (!crtc)
+		return 0;
+
+	crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+	if (!crtc_state)
+		return -EINVAL;
+
+	if (old_conn_state->tv.mode != new_conn_state->tv.mode)
+		crtc_state->mode_changed = true;
+
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))
+		crtc_state->connectors_changed = true;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_check);
+
 /**
  * __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
  * @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index c8fbce795ee7..b9740edb2658 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -26,6 +26,7 @@
 
 #include <linux/types.h>
 
+struct drm_atomic_state;
 struct drm_bridge;
 struct drm_bridge_state;
 struct drm_crtc;
@@ -71,6 +72,8 @@ void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
 					 struct drm_connector_state *conn_state);
 void drm_atomic_helper_connector_reset(struct drm_connector *connector);
 void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+					 struct drm_atomic_state *state);
 void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connector);
 void
 __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 20/25] drm/atomic-helper: Add an analog TV atomic_check implementation

[Maxime Ripard]

The analog TV connector drivers share some atomic_check logic, and the new
TV standard property have created some boilerplate that can be be shared
across drivers too.

Let's create an atomic_check helper for those use cases.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_atomic_state_helper.c | 49 +++++++++++++++++++++++++++++++
 include/drm/drm_atomic_state_helper.h     |  3 ++
 2 files changed, 52 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index e1fc3f26340a..3a467013c656 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -556,6 +556,55 @@ void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
 }
 EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
 
+/**
+ * @drm_atomic_helper_connector_tv_check: Validate an analog TV connector state
+ * @connector: DRM Connector
+ * @state: the DRM State object
+ *
+ * Checks the state object to see if the requested state is valid for an
+ * analog TV connector.
+ *
+ * Returns:
+ * Zero for success, a negative error code on error.
+ */
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+					 struct drm_atomic_state *state)
+{
+	struct drm_connector_state *old_conn_state =
+		drm_atomic_get_old_connector_state(state, connector);
+	struct drm_connector_state *new_conn_state =
+		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+
+	crtc = new_conn_state->crtc;
+	if (!crtc)
+		return 0;
+
+	crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+	if (!crtc_state)
+		return -EINVAL;
+
+	if (old_conn_state->tv.mode != new_conn_state->tv.mode)
+		crtc_state->mode_changed = true;
+
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))
+		crtc_state->connectors_changed = true;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_check);
+
 /**
  * __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
  * @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index c8fbce795ee7..b9740edb2658 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -26,6 +26,7 @@
 
 #include <linux/types.h>
 
+struct drm_atomic_state;
 struct drm_bridge;
 struct drm_bridge_state;
 struct drm_crtc;
@@ -71,6 +72,8 @@ void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
 					 struct drm_connector_state *conn_state);
 void drm_atomic_helper_connector_reset(struct drm_connector *connector);
 void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+					 struct drm_atomic_state *state);
 void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connector);
 void
 __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 20/25] drm/atomic-helper: Add an analog TV atomic_check implementation

[Maxime Ripard]

The analog TV connector drivers share some atomic_check logic, and the new
TV standard property have created some boilerplate that can be be shared
across drivers too.

Let's create an atomic_check helper for those use cases.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_atomic_state_helper.c | 49 +++++++++++++++++++++++++++++++
 include/drm/drm_atomic_state_helper.h     |  3 ++
 2 files changed, 52 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index e1fc3f26340a..3a467013c656 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -556,6 +556,55 @@ void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
 }
 EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
 
+/**
+ * @drm_atomic_helper_connector_tv_check: Validate an analog TV connector state
+ * @connector: DRM Connector
+ * @state: the DRM State object
+ *
+ * Checks the state object to see if the requested state is valid for an
+ * analog TV connector.
+ *
+ * Returns:
+ * Zero for success, a negative error code on error.
+ */
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+					 struct drm_atomic_state *state)
+{
+	struct drm_connector_state *old_conn_state =
+		drm_atomic_get_old_connector_state(state, connector);
+	struct drm_connector_state *new_conn_state =
+		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+
+	crtc = new_conn_state->crtc;
+	if (!crtc)
+		return 0;
+
+	crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+	if (!crtc_state)
+		return -EINVAL;
+
+	if (old_conn_state->tv.mode != new_conn_state->tv.mode)
+		crtc_state->mode_changed = true;
+
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))
+		crtc_state->connectors_changed = true;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_check);
+
 /**
  * __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
  * @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index c8fbce795ee7..b9740edb2658 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -26,6 +26,7 @@
 
 #include <linux/types.h>
 
+struct drm_atomic_state;
 struct drm_bridge;
 struct drm_bridge_state;
 struct drm_crtc;
@@ -71,6 +72,8 @@ void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
 					 struct drm_connector_state *conn_state);
 void drm_atomic_helper_connector_reset(struct drm_connector *connector);
 void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+					 struct drm_atomic_state *state);
 void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connector);
 void
 __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 21/25] drm/vc4: vec: Use TV Reset implementation

[Maxime Ripard]

The analog TV properties created by the drm_mode_create_tv_properties() are
not properly initialised at reset. Let's switch our implementation to call
drm_atomic_helper_connector_tv_reset().

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_vec.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index adc9bf99e3fd..90e375a8a8f9 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -268,6 +268,12 @@ vc4_vec_connector_detect(struct drm_connector *connector, bool force)
 	return connector_status_unknown;
 }
 
+static void vc4_vec_connector_reset(struct drm_connector *connector)
+{
+	drm_atomic_helper_connector_reset(connector);
+	drm_atomic_helper_connector_tv_reset(connector);
+}
+
 static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 {
 	struct drm_connector_state *state = connector->state;
@@ -288,7 +294,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 static const struct drm_connector_funcs vc4_vec_connector_funcs = {
 	.detect = vc4_vec_connector_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
-	.reset = drm_atomic_helper_connector_reset,
+	.reset = vc4_vec_connector_reset,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 21/25] drm/vc4: vec: Use TV Reset implementation

[Maxime Ripard]

The analog TV properties created by the drm_mode_create_tv_properties() are
not properly initialised at reset. Let's switch our implementation to call
drm_atomic_helper_connector_tv_reset().

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_vec.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index adc9bf99e3fd..90e375a8a8f9 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -268,6 +268,12 @@ vc4_vec_connector_detect(struct drm_connector *connector, bool force)
 	return connector_status_unknown;
 }
 
+static void vc4_vec_connector_reset(struct drm_connector *connector)
+{
+	drm_atomic_helper_connector_reset(connector);
+	drm_atomic_helper_connector_tv_reset(connector);
+}
+
 static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 {
 	struct drm_connector_state *state = connector->state;
@@ -288,7 +294,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 static const struct drm_connector_funcs vc4_vec_connector_funcs = {
 	.detect = vc4_vec_connector_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
-	.reset = drm_atomic_helper_connector_reset,
+	.reset = vc4_vec_connector_reset,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 21/25] drm/vc4: vec: Use TV Reset implementation

[Maxime Ripard]

The analog TV properties created by the drm_mode_create_tv_properties() are
not properly initialised at reset. Let's switch our implementation to call
drm_atomic_helper_connector_tv_reset().

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_vec.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index adc9bf99e3fd..90e375a8a8f9 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -268,6 +268,12 @@ vc4_vec_connector_detect(struct drm_connector *connector, bool force)
 	return connector_status_unknown;
 }
 
+static void vc4_vec_connector_reset(struct drm_connector *connector)
+{
+	drm_atomic_helper_connector_reset(connector);
+	drm_atomic_helper_connector_tv_reset(connector);
+}
+
 static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 {
 	struct drm_connector_state *state = connector->state;
@@ -288,7 +294,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 static const struct drm_connector_funcs vc4_vec_connector_funcs = {
 	.detect = vc4_vec_connector_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
-	.reset = drm_atomic_helper_connector_reset,
+	.reset = vc4_vec_connector_reset,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 21/25] drm/vc4: vec: Use TV Reset implementation

[Maxime Ripard]

The analog TV properties created by the drm_mode_create_tv_properties() are
not properly initialised at reset. Let's switch our implementation to call
drm_atomic_helper_connector_tv_reset().

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_vec.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index adc9bf99e3fd..90e375a8a8f9 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -268,6 +268,12 @@ vc4_vec_connector_detect(struct drm_connector *connector, bool force)
 	return connector_status_unknown;
 }
 
+static void vc4_vec_connector_reset(struct drm_connector *connector)
+{
+	drm_atomic_helper_connector_reset(connector);
+	drm_atomic_helper_connector_tv_reset(connector);
+}
+
 static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 {
 	struct drm_connector_state *state = connector->state;
@@ -288,7 +294,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 static const struct drm_connector_funcs vc4_vec_connector_funcs = {
 	.detect = vc4_vec_connector_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
-	.reset = drm_atomic_helper_connector_reset,
+	.reset = vc4_vec_connector_reset,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 21/25] drm/vc4: vec: Use TV Reset implementation

[Maxime Ripard]

The analog TV properties created by the drm_mode_create_tv_properties() are
not properly initialised at reset. Let's switch our implementation to call
drm_atomic_helper_connector_tv_reset().

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_vec.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index adc9bf99e3fd..90e375a8a8f9 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -268,6 +268,12 @@ vc4_vec_connector_detect(struct drm_connector *connector, bool force)
 	return connector_status_unknown;
 }
 
+static void vc4_vec_connector_reset(struct drm_connector *connector)
+{
+	drm_atomic_helper_connector_reset(connector);
+	drm_atomic_helper_connector_tv_reset(connector);
+}
+
 static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 {
 	struct drm_connector_state *state = connector->state;
@@ -288,7 +294,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector *connector)
 static const struct drm_connector_funcs vc4_vec_connector_funcs = {
 	.detect = vc4_vec_connector_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
-	.reset = drm_atomic_helper_connector_reset,
+	.reset = vc4_vec_connector_reset,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 22/25] drm/vc4: vec: Check for VEC output constraints

[Maxime Ripard]

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

The VEC can accept pretty much any relatively reasonable mode, but still
has a bunch of constraints to meet.

Let's create an atomic_check() implementation that will make sure we
don't end up accepting a non-functional mode.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---

Changes in v6:
- Used htotal instead of vtotal to discriminate PAL against NTSC
---
 drivers/gpu/drm/vc4/vc4_vec.c | 50 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 90e375a8a8f9..bfa8a58dba30 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -453,6 +453,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 					struct drm_crtc_state *crtc_state,
 					struct drm_connector_state *conn_state)
 {
+	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
 	const struct vc4_vec_tv_mode *vec_mode;
 
 	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
@@ -461,6 +462,55 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
 		return -EINVAL;
 
+	if (mode->crtc_hdisplay % 4)
+		return -EINVAL;
+
+	if (!(mode->crtc_hsync_end - mode->crtc_hsync_start))
+		return -EINVAL;
+
+	switch (mode->htotal) {
+	/* NTSC */
+	case 858:
+		if (mode->crtc_vtotal > 262)
+			return -EINVAL;
+
+		if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 253)
+			return -EINVAL;
+
+		if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+			return -EINVAL;
+
+		if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+			return -EINVAL;
+
+		if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 4)
+			return -EINVAL;
+
+		break;
+
+	/* PAL/SECAM */
+	case 864:
+		if (mode->crtc_vtotal > 312)
+			return -EINVAL;
+
+		if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 305)
+			return -EINVAL;
+
+		if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+			return -EINVAL;
+
+		if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+			return -EINVAL;
+
+		if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 2)
+			return -EINVAL;
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
 	return 0;
 }
 

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 22/25] drm/vc4: vec: Check for VEC output constraints

[Maxime Ripard]

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

The VEC can accept pretty much any relatively reasonable mode, but still
has a bunch of constraints to meet.

Let's create an atomic_check() implementation that will make sure we
don't end up accepting a non-functional mode.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---

Changes in v6:
- Used htotal instead of vtotal to discriminate PAL against NTSC
---
 drivers/gpu/drm/vc4/vc4_vec.c | 50 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 90e375a8a8f9..bfa8a58dba30 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -453,6 +453,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 					struct drm_crtc_state *crtc_state,
 					struct drm_connector_state *conn_state)
 {
+	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
 	const struct vc4_vec_tv_mode *vec_mode;
 
 	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
@@ -461,6 +462,55 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
 		return -EINVAL;
 
+	if (mode->crtc_hdisplay % 4)
+		return -EINVAL;
+
+	if (!(mode->crtc_hsync_end - mode->crtc_hsync_start))
+		return -EINVAL;
+
+	switch (mode->htotal) {
+	/* NTSC */
+	case 858:
+		if (mode->crtc_vtotal > 262)
+			return -EINVAL;
+
+		if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 253)
+			return -EINVAL;
+
+		if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+			return -EINVAL;
+
+		if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+			return -EINVAL;
+
+		if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 4)
+			return -EINVAL;
+
+		break;
+
+	/* PAL/SECAM */
+	case 864:
+		if (mode->crtc_vtotal > 312)
+			return -EINVAL;
+
+		if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 305)
+			return -EINVAL;
+
+		if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+			return -EINVAL;
+
+		if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+			return -EINVAL;
+
+		if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 2)
+			return -EINVAL;
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
 	return 0;
 }
 

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 22/25] drm/vc4: vec: Check for VEC output constraints

[Maxime Ripard]

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

The VEC can accept pretty much any relatively reasonable mode, but still
has a bunch of constraints to meet.

Let's create an atomic_check() implementation that will make sure we
don't end up accepting a non-functional mode.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---

Changes in v6:
- Used htotal instead of vtotal to discriminate PAL against NTSC
---
 drivers/gpu/drm/vc4/vc4_vec.c | 50 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 90e375a8a8f9..bfa8a58dba30 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -453,6 +453,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 					struct drm_crtc_state *crtc_state,
 					struct drm_connector_state *conn_state)
 {
+	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
 	const struct vc4_vec_tv_mode *vec_mode;
 
 	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
@@ -461,6 +462,55 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
 		return -EINVAL;
 
+	if (mode->crtc_hdisplay % 4)
+		return -EINVAL;
+
+	if (!(mode->crtc_hsync_end - mode->crtc_hsync_start))
+		return -EINVAL;
+
+	switch (mode->htotal) {
+	/* NTSC */
+	case 858:
+		if (mode->crtc_vtotal > 262)
+			return -EINVAL;
+
+		if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 253)
+			return -EINVAL;
+
+		if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+			return -EINVAL;
+
+		if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+			return -EINVAL;
+
+		if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 4)
+			return -EINVAL;
+
+		break;
+
+	/* PAL/SECAM */
+	case 864:
+		if (mode->crtc_vtotal > 312)
+			return -EINVAL;
+
+		if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 305)
+			return -EINVAL;
+
+		if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+			return -EINVAL;
+
+		if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+			return -EINVAL;
+
+		if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 2)
+			return -EINVAL;
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
 	return 0;
 }
 

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 22/25] drm/vc4: vec: Check for VEC output constraints

[Maxime Ripard]

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

The VEC can accept pretty much any relatively reasonable mode, but still
has a bunch of constraints to meet.

Let's create an atomic_check() implementation that will make sure we
don't end up accepting a non-functional mode.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---

Changes in v6:
- Used htotal instead of vtotal to discriminate PAL against NTSC
---
 drivers/gpu/drm/vc4/vc4_vec.c | 50 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 90e375a8a8f9..bfa8a58dba30 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -453,6 +453,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 					struct drm_crtc_state *crtc_state,
 					struct drm_connector_state *conn_state)
 {
+	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
 	const struct vc4_vec_tv_mode *vec_mode;
 
 	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
@@ -461,6 +462,55 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
 		return -EINVAL;
 
+	if (mode->crtc_hdisplay % 4)
+		return -EINVAL;
+
+	if (!(mode->crtc_hsync_end - mode->crtc_hsync_start))
+		return -EINVAL;
+
+	switch (mode->htotal) {
+	/* NTSC */
+	case 858:
+		if (mode->crtc_vtotal > 262)
+			return -EINVAL;
+
+		if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 253)
+			return -EINVAL;
+
+		if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+			return -EINVAL;
+
+		if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+			return -EINVAL;
+
+		if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 4)
+			return -EINVAL;
+
+		break;
+
+	/* PAL/SECAM */
+	case 864:
+		if (mode->crtc_vtotal > 312)
+			return -EINVAL;
+
+		if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 305)
+			return -EINVAL;
+
+		if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+			return -EINVAL;
+
+		if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+			return -EINVAL;
+
+		if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 2)
+			return -EINVAL;
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
 	return 0;
 }
 

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 22/25] drm/vc4: vec: Check for VEC output constraints

[Maxime Ripard]

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

The VEC can accept pretty much any relatively reasonable mode, but still
has a bunch of constraints to meet.

Let's create an atomic_check() implementation that will make sure we
don't end up accepting a non-functional mode.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---

Changes in v6:
- Used htotal instead of vtotal to discriminate PAL against NTSC
---
 drivers/gpu/drm/vc4/vc4_vec.c | 50 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 90e375a8a8f9..bfa8a58dba30 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -453,6 +453,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 					struct drm_crtc_state *crtc_state,
 					struct drm_connector_state *conn_state)
 {
+	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
 	const struct vc4_vec_tv_mode *vec_mode;
 
 	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
@@ -461,6 +462,55 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
 		return -EINVAL;
 
+	if (mode->crtc_hdisplay % 4)
+		return -EINVAL;
+
+	if (!(mode->crtc_hsync_end - mode->crtc_hsync_start))
+		return -EINVAL;
+
+	switch (mode->htotal) {
+	/* NTSC */
+	case 858:
+		if (mode->crtc_vtotal > 262)
+			return -EINVAL;
+
+		if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 253)
+			return -EINVAL;
+
+		if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+			return -EINVAL;
+
+		if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+			return -EINVAL;
+
+		if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 4)
+			return -EINVAL;
+
+		break;
+
+	/* PAL/SECAM */
+	case 864:
+		if (mode->crtc_vtotal > 312)
+			return -EINVAL;
+
+		if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 305)
+			return -EINVAL;
+
+		if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+			return -EINVAL;
+
+		if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+			return -EINVAL;
+
+		if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 2)
+			return -EINVAL;
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
 	return 0;
 }
 

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 23/25] drm/vc4: vec: Convert to the new TV mode property

[Maxime Ripard]

Now that the core can deal fine with analog TV modes, let's convert the vc4
VEC driver to leverage those new features.

We've added some backward compatibility to support the old TV mode property
and translate it into the new TV norm property. We're also making use of
the new analog TV atomic_check helper to make sure we trigger a modeset
whenever the TV mode is updated.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Lookup the tv mode in atomic_check to make sure it's supported

Changes in v6:
- Use new get_modes helper

Changes in v5:
- Renamed tv_mode_names into legacy_tv_mode_names

Changes in v4:
- Removed the count variable in .get_modes
---
 drivers/gpu/drm/vc4/vc4_vec.c | 186 ++++++++++++++++++++++++++++++------------
 1 file changed, 132 insertions(+), 54 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index bfa8a58dba30..a828fc6fb776 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -172,6 +172,8 @@ struct vc4_vec {
 
 	struct clk *clock;
 
+	struct drm_property *legacy_tv_mode_property;
+
 	struct debugfs_regset32 regset;
 };
 
@@ -184,6 +186,12 @@ encoder_to_vc4_vec(struct drm_encoder *encoder)
 	return container_of(encoder, struct vc4_vec, encoder.base);
 }
 
+static inline struct vc4_vec *
+connector_to_vc4_vec(struct drm_connector *connector)
+{
+	return container_of(connector, struct vc4_vec, connector);
+}
+
 enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC,
 	VC4_VEC_TV_MODE_NTSC_J,
@@ -192,7 +200,7 @@ enum vc4_vec_tv_mode_id {
 };
 
 struct vc4_vec_tv_mode {
-	const struct drm_display_mode *mode;
+	unsigned int mode;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -225,43 +233,51 @@ static const struct debugfs_reg32 vec_regs[] = {
 	VC4_REG32(VEC_DAC_MISC),
 };
 
-static const struct drm_display_mode ntsc_mode = {
-	DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500,
-		 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0,
-		 480, 480 + 7, 480 + 7 + 6, 525, 0,
-		 DRM_MODE_FLAG_INTERLACE)
-};
-
-static const struct drm_display_mode pal_mode = {
-	DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500,
-		 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0,
-		 576, 576 + 4, 576 + 4 + 6, 625, 0,
-		 DRM_MODE_FLAG_INTERLACE)
-};
-
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
-	[VC4_VEC_TV_MODE_NTSC] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_NTSC_J] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_J,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_PAL] = {
-		.mode = &pal_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_PAL,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_PAL_M] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_M,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 };
 
+static inline const struct vc4_vec_tv_mode *
+vc4_vec_tv_mode_lookup(unsigned int mode)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
+		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
+
+		if (tv_mode->mode == mode)
+			return tv_mode;
+	}
+
+	return NULL;
+}
+
+static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
+	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
+	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+};
+
 static enum drm_connector_status
 vc4_vec_connector_detect(struct drm_connector *connector, bool force)
 {
@@ -274,21 +290,74 @@ static void vc4_vec_connector_reset(struct drm_connector *connector)
 	drm_atomic_helper_connector_tv_reset(connector);
 }
 
-static int vc4_vec_connector_get_modes(struct drm_connector *connector)
+static int
+vc4_vec_connector_set_property(struct drm_connector *connector,
+			       struct drm_connector_state *state,
+			       struct drm_property *property,
+			       uint64_t val)
 {
-	struct drm_connector_state *state = connector->state;
-	struct drm_display_mode *mode;
-
-	mode = drm_mode_duplicate(connector->dev,
-				  vc4_vec_tv_modes[state->tv.legacy_mode].mode);
-	if (!mode) {
-		DRM_ERROR("Failed to create a new display mode\n");
-		return -ENOMEM;
+	struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+	if (property != vec->legacy_tv_mode_property)
+		return -EINVAL;
+
+	switch (val) {
+	case VC4_VEC_TV_MODE_NTSC:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
+		break;
+
+	case VC4_VEC_TV_MODE_NTSC_J:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
+		break;
+
+	case VC4_VEC_TV_MODE_PAL:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL;
+		break;
+
+	case VC4_VEC_TV_MODE_PAL_M:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
+		break;
+
+	default:
+		return -EINVAL;
 	}
 
-	drm_mode_probed_add(connector, mode);
+	return 0;
+}
+
+static int
+vc4_vec_connector_get_property(struct drm_connector *connector,
+			       const struct drm_connector_state *state,
+			       struct drm_property *property,
+			       uint64_t *val)
+{
+	struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+	if (property != vec->legacy_tv_mode_property)
+		return -EINVAL;
+
+	switch (state->tv.mode) {
+	case DRM_MODE_TV_MODE_NTSC:
+		*val = VC4_VEC_TV_MODE_NTSC;
+		break;
+
+	case DRM_MODE_TV_MODE_NTSC_J:
+		*val = VC4_VEC_TV_MODE_NTSC_J;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL:
+		*val = VC4_VEC_TV_MODE_PAL;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL_M:
+		*val = VC4_VEC_TV_MODE_PAL_M;
+		break;
+
+	default:
+		return -EINVAL;
+	}
 
-	return 1;
+	return 0;
 }
 
 static const struct drm_connector_funcs vc4_vec_connector_funcs = {
@@ -297,15 +366,19 @@ static const struct drm_connector_funcs vc4_vec_connector_funcs = {
 	.reset = vc4_vec_connector_reset,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+	.atomic_get_property = vc4_vec_connector_get_property,
+	.atomic_set_property = vc4_vec_connector_set_property,
 };
 
 static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs = {
-	.get_modes = vc4_vec_connector_get_modes,
+	.atomic_check = drm_atomic_helper_connector_tv_check,
+	.get_modes = drm_connector_helper_tv_get_modes,
 };
 
 static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 {
 	struct drm_connector *connector = &vec->connector;
+	struct drm_property *prop;
 	int ret;
 
 	connector->interlace_allowed = true;
@@ -318,8 +391,17 @@ static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 	drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
 
 	drm_object_attach_property(&connector->base,
-				   dev->mode_config.legacy_tv_mode_property,
-				   VC4_VEC_TV_MODE_NTSC);
+				   dev->mode_config.tv_mode_property,
+				   DRM_MODE_TV_MODE_NTSC);
+
+	prop = drm_property_create_enum(dev, 0, "mode",
+					legacy_tv_mode_names,
+					ARRAY_SIZE(legacy_tv_mode_names));
+	if (!prop)
+		return -ENOMEM;
+	vec->legacy_tv_mode_property = prop;
+
+	drm_object_attach_property(&connector->base, prop, VC4_VEC_TV_MODE_NTSC);
 
 	drm_connector_attach_encoder(connector, &vec->encoder.base);
 
@@ -366,13 +448,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
-	const struct vc4_vec_tv_mode *tv_mode =
-		&vc4_vec_tv_modes[conn_state->tv.legacy_mode];
+	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	if (!tv_mode)
+		goto err_dev_exit;
+
 	ret = pm_runtime_get_sync(&vec->pdev->dev);
 	if (ret < 0) {
 		DRM_ERROR("Failed to retain power domain: %d\n", ret);
@@ -454,12 +539,10 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 					struct drm_connector_state *conn_state)
 {
 	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
-	const struct vc4_vec_tv_mode *vec_mode;
+	const struct vc4_vec_tv_mode *tv_mode;
 
-	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
-
-	if (conn_state->crtc &&
-	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode, mode->htotal);
+	if (!tv_mode)
 		return -EINVAL;
 
 	if (mode->crtc_hdisplay % 4)
@@ -556,13 +639,6 @@ static const struct of_device_id vc4_vec_dt_match[] = {
 	{ /* sentinel */ },
 };
 
-static const char * const tv_mode_names[] = {
-	[VC4_VEC_TV_MODE_NTSC] = "NTSC",
-	[VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J",
-	[VC4_VEC_TV_MODE_PAL] = "PAL",
-	[VC4_VEC_TV_MODE_PAL_M] = "PAL-M",
-};
-
 static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -570,9 +646,11 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_vec *vec;
 	int ret;
 
-	ret = drm_mode_create_tv_properties_legacy(drm,
-						   ARRAY_SIZE(tv_mode_names),
-						   tv_mode_names);
+	ret = drm_mode_create_tv_properties(drm,
+					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
+					    BIT(DRM_MODE_TV_MODE_PAL) |
+					    BIT(DRM_MODE_TV_MODE_PAL_M));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 23/25] drm/vc4: vec: Convert to the new TV mode property

[Maxime Ripard]

Now that the core can deal fine with analog TV modes, let's convert the vc4
VEC driver to leverage those new features.

We've added some backward compatibility to support the old TV mode property
and translate it into the new TV norm property. We're also making use of
the new analog TV atomic_check helper to make sure we trigger a modeset
whenever the TV mode is updated.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Lookup the tv mode in atomic_check to make sure it's supported

Changes in v6:
- Use new get_modes helper

Changes in v5:
- Renamed tv_mode_names into legacy_tv_mode_names

Changes in v4:
- Removed the count variable in .get_modes
---
 drivers/gpu/drm/vc4/vc4_vec.c | 186 ++++++++++++++++++++++++++++++------------
 1 file changed, 132 insertions(+), 54 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index bfa8a58dba30..a828fc6fb776 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -172,6 +172,8 @@ struct vc4_vec {
 
 	struct clk *clock;
 
+	struct drm_property *legacy_tv_mode_property;
+
 	struct debugfs_regset32 regset;
 };
 
@@ -184,6 +186,12 @@ encoder_to_vc4_vec(struct drm_encoder *encoder)
 	return container_of(encoder, struct vc4_vec, encoder.base);
 }
 
+static inline struct vc4_vec *
+connector_to_vc4_vec(struct drm_connector *connector)
+{
+	return container_of(connector, struct vc4_vec, connector);
+}
+
 enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC,
 	VC4_VEC_TV_MODE_NTSC_J,
@@ -192,7 +200,7 @@ enum vc4_vec_tv_mode_id {
 };
 
 struct vc4_vec_tv_mode {
-	const struct drm_display_mode *mode;
+	unsigned int mode;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -225,43 +233,51 @@ static const struct debugfs_reg32 vec_regs[] = {
 	VC4_REG32(VEC_DAC_MISC),
 };
 
-static const struct drm_display_mode ntsc_mode = {
-	DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500,
-		 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0,
-		 480, 480 + 7, 480 + 7 + 6, 525, 0,
-		 DRM_MODE_FLAG_INTERLACE)
-};
-
-static const struct drm_display_mode pal_mode = {
-	DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500,
-		 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0,
-		 576, 576 + 4, 576 + 4 + 6, 625, 0,
-		 DRM_MODE_FLAG_INTERLACE)
-};
-
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
-	[VC4_VEC_TV_MODE_NTSC] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_NTSC_J] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_J,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_PAL] = {
-		.mode = &pal_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_PAL,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_PAL_M] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_M,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 };
 
+static inline const struct vc4_vec_tv_mode *
+vc4_vec_tv_mode_lookup(unsigned int mode)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
+		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
+
+		if (tv_mode->mode == mode)
+			return tv_mode;
+	}
+
+	return NULL;
+}
+
+static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
+	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
+	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+};
+
 static enum drm_connector_status
 vc4_vec_connector_detect(struct drm_connector *connector, bool force)
 {
@@ -274,21 +290,74 @@ static void vc4_vec_connector_reset(struct drm_connector *connector)
 	drm_atomic_helper_connector_tv_reset(connector);
 }
 
-static int vc4_vec_connector_get_modes(struct drm_connector *connector)
+static int
+vc4_vec_connector_set_property(struct drm_connector *connector,
+			       struct drm_connector_state *state,
+			       struct drm_property *property,
+			       uint64_t val)
 {
-	struct drm_connector_state *state = connector->state;
-	struct drm_display_mode *mode;
-
-	mode = drm_mode_duplicate(connector->dev,
-				  vc4_vec_tv_modes[state->tv.legacy_mode].mode);
-	if (!mode) {
-		DRM_ERROR("Failed to create a new display mode\n");
-		return -ENOMEM;
+	struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+	if (property != vec->legacy_tv_mode_property)
+		return -EINVAL;
+
+	switch (val) {
+	case VC4_VEC_TV_MODE_NTSC:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
+		break;
+
+	case VC4_VEC_TV_MODE_NTSC_J:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
+		break;
+
+	case VC4_VEC_TV_MODE_PAL:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL;
+		break;
+
+	case VC4_VEC_TV_MODE_PAL_M:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
+		break;
+
+	default:
+		return -EINVAL;
 	}
 
-	drm_mode_probed_add(connector, mode);
+	return 0;
+}
+
+static int
+vc4_vec_connector_get_property(struct drm_connector *connector,
+			       const struct drm_connector_state *state,
+			       struct drm_property *property,
+			       uint64_t *val)
+{
+	struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+	if (property != vec->legacy_tv_mode_property)
+		return -EINVAL;
+
+	switch (state->tv.mode) {
+	case DRM_MODE_TV_MODE_NTSC:
+		*val = VC4_VEC_TV_MODE_NTSC;
+		break;
+
+	case DRM_MODE_TV_MODE_NTSC_J:
+		*val = VC4_VEC_TV_MODE_NTSC_J;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL:
+		*val = VC4_VEC_TV_MODE_PAL;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL_M:
+		*val = VC4_VEC_TV_MODE_PAL_M;
+		break;
+
+	default:
+		return -EINVAL;
+	}
 
-	return 1;
+	return 0;
 }
 
 static const struct drm_connector_funcs vc4_vec_connector_funcs = {
@@ -297,15 +366,19 @@ static const struct drm_connector_funcs vc4_vec_connector_funcs = {
 	.reset = vc4_vec_connector_reset,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+	.atomic_get_property = vc4_vec_connector_get_property,
+	.atomic_set_property = vc4_vec_connector_set_property,
 };
 
 static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs = {
-	.get_modes = vc4_vec_connector_get_modes,
+	.atomic_check = drm_atomic_helper_connector_tv_check,
+	.get_modes = drm_connector_helper_tv_get_modes,
 };
 
 static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 {
 	struct drm_connector *connector = &vec->connector;
+	struct drm_property *prop;
 	int ret;
 
 	connector->interlace_allowed = true;
@@ -318,8 +391,17 @@ static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 	drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
 
 	drm_object_attach_property(&connector->base,
-				   dev->mode_config.legacy_tv_mode_property,
-				   VC4_VEC_TV_MODE_NTSC);
+				   dev->mode_config.tv_mode_property,
+				   DRM_MODE_TV_MODE_NTSC);
+
+	prop = drm_property_create_enum(dev, 0, "mode",
+					legacy_tv_mode_names,
+					ARRAY_SIZE(legacy_tv_mode_names));
+	if (!prop)
+		return -ENOMEM;
+	vec->legacy_tv_mode_property = prop;
+
+	drm_object_attach_property(&connector->base, prop, VC4_VEC_TV_MODE_NTSC);
 
 	drm_connector_attach_encoder(connector, &vec->encoder.base);
 
@@ -366,13 +448,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
-	const struct vc4_vec_tv_mode *tv_mode =
-		&vc4_vec_tv_modes[conn_state->tv.legacy_mode];
+	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	if (!tv_mode)
+		goto err_dev_exit;
+
 	ret = pm_runtime_get_sync(&vec->pdev->dev);
 	if (ret < 0) {
 		DRM_ERROR("Failed to retain power domain: %d\n", ret);
@@ -454,12 +539,10 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 					struct drm_connector_state *conn_state)
 {
 	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
-	const struct vc4_vec_tv_mode *vec_mode;
+	const struct vc4_vec_tv_mode *tv_mode;
 
-	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
-
-	if (conn_state->crtc &&
-	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode, mode->htotal);
+	if (!tv_mode)
 		return -EINVAL;
 
 	if (mode->crtc_hdisplay % 4)
@@ -556,13 +639,6 @@ static const struct of_device_id vc4_vec_dt_match[] = {
 	{ /* sentinel */ },
 };
 
-static const char * const tv_mode_names[] = {
-	[VC4_VEC_TV_MODE_NTSC] = "NTSC",
-	[VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J",
-	[VC4_VEC_TV_MODE_PAL] = "PAL",
-	[VC4_VEC_TV_MODE_PAL_M] = "PAL-M",
-};
-
 static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -570,9 +646,11 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_vec *vec;
 	int ret;
 
-	ret = drm_mode_create_tv_properties_legacy(drm,
-						   ARRAY_SIZE(tv_mode_names),
-						   tv_mode_names);
+	ret = drm_mode_create_tv_properties(drm,
+					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
+					    BIT(DRM_MODE_TV_MODE_PAL) |
+					    BIT(DRM_MODE_TV_MODE_PAL_M));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 23/25] drm/vc4: vec: Convert to the new TV mode property

[Maxime Ripard]

Now that the core can deal fine with analog TV modes, let's convert the vc4
VEC driver to leverage those new features.

We've added some backward compatibility to support the old TV mode property
and translate it into the new TV norm property. We're also making use of
the new analog TV atomic_check helper to make sure we trigger a modeset
whenever the TV mode is updated.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Lookup the tv mode in atomic_check to make sure it's supported

Changes in v6:
- Use new get_modes helper

Changes in v5:
- Renamed tv_mode_names into legacy_tv_mode_names

Changes in v4:
- Removed the count variable in .get_modes
---
 drivers/gpu/drm/vc4/vc4_vec.c | 186 ++++++++++++++++++++++++++++++------------
 1 file changed, 132 insertions(+), 54 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index bfa8a58dba30..a828fc6fb776 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -172,6 +172,8 @@ struct vc4_vec {
 
 	struct clk *clock;
 
+	struct drm_property *legacy_tv_mode_property;
+
 	struct debugfs_regset32 regset;
 };
 
@@ -184,6 +186,12 @@ encoder_to_vc4_vec(struct drm_encoder *encoder)
 	return container_of(encoder, struct vc4_vec, encoder.base);
 }
 
+static inline struct vc4_vec *
+connector_to_vc4_vec(struct drm_connector *connector)
+{
+	return container_of(connector, struct vc4_vec, connector);
+}
+
 enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC,
 	VC4_VEC_TV_MODE_NTSC_J,
@@ -192,7 +200,7 @@ enum vc4_vec_tv_mode_id {
 };
 
 struct vc4_vec_tv_mode {
-	const struct drm_display_mode *mode;
+	unsigned int mode;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -225,43 +233,51 @@ static const struct debugfs_reg32 vec_regs[] = {
 	VC4_REG32(VEC_DAC_MISC),
 };
 
-static const struct drm_display_mode ntsc_mode = {
-	DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500,
-		 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0,
-		 480, 480 + 7, 480 + 7 + 6, 525, 0,
-		 DRM_MODE_FLAG_INTERLACE)
-};
-
-static const struct drm_display_mode pal_mode = {
-	DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500,
-		 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0,
-		 576, 576 + 4, 576 + 4 + 6, 625, 0,
-		 DRM_MODE_FLAG_INTERLACE)
-};
-
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
-	[VC4_VEC_TV_MODE_NTSC] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_NTSC_J] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_J,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_PAL] = {
-		.mode = &pal_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_PAL,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_PAL_M] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_M,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 };
 
+static inline const struct vc4_vec_tv_mode *
+vc4_vec_tv_mode_lookup(unsigned int mode)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
+		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
+
+		if (tv_mode->mode == mode)
+			return tv_mode;
+	}
+
+	return NULL;
+}
+
+static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
+	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
+	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+};
+
 static enum drm_connector_status
 vc4_vec_connector_detect(struct drm_connector *connector, bool force)
 {
@@ -274,21 +290,74 @@ static void vc4_vec_connector_reset(struct drm_connector *connector)
 	drm_atomic_helper_connector_tv_reset(connector);
 }
 
-static int vc4_vec_connector_get_modes(struct drm_connector *connector)
+static int
+vc4_vec_connector_set_property(struct drm_connector *connector,
+			       struct drm_connector_state *state,
+			       struct drm_property *property,
+			       uint64_t val)
 {
-	struct drm_connector_state *state = connector->state;
-	struct drm_display_mode *mode;
-
-	mode = drm_mode_duplicate(connector->dev,
-				  vc4_vec_tv_modes[state->tv.legacy_mode].mode);
-	if (!mode) {
-		DRM_ERROR("Failed to create a new display mode\n");
-		return -ENOMEM;
+	struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+	if (property != vec->legacy_tv_mode_property)
+		return -EINVAL;
+
+	switch (val) {
+	case VC4_VEC_TV_MODE_NTSC:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
+		break;
+
+	case VC4_VEC_TV_MODE_NTSC_J:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
+		break;
+
+	case VC4_VEC_TV_MODE_PAL:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL;
+		break;
+
+	case VC4_VEC_TV_MODE_PAL_M:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
+		break;
+
+	default:
+		return -EINVAL;
 	}
 
-	drm_mode_probed_add(connector, mode);
+	return 0;
+}
+
+static int
+vc4_vec_connector_get_property(struct drm_connector *connector,
+			       const struct drm_connector_state *state,
+			       struct drm_property *property,
+			       uint64_t *val)
+{
+	struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+	if (property != vec->legacy_tv_mode_property)
+		return -EINVAL;
+
+	switch (state->tv.mode) {
+	case DRM_MODE_TV_MODE_NTSC:
+		*val = VC4_VEC_TV_MODE_NTSC;
+		break;
+
+	case DRM_MODE_TV_MODE_NTSC_J:
+		*val = VC4_VEC_TV_MODE_NTSC_J;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL:
+		*val = VC4_VEC_TV_MODE_PAL;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL_M:
+		*val = VC4_VEC_TV_MODE_PAL_M;
+		break;
+
+	default:
+		return -EINVAL;
+	}
 
-	return 1;
+	return 0;
 }
 
 static const struct drm_connector_funcs vc4_vec_connector_funcs = {
@@ -297,15 +366,19 @@ static const struct drm_connector_funcs vc4_vec_connector_funcs = {
 	.reset = vc4_vec_connector_reset,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+	.atomic_get_property = vc4_vec_connector_get_property,
+	.atomic_set_property = vc4_vec_connector_set_property,
 };
 
 static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs = {
-	.get_modes = vc4_vec_connector_get_modes,
+	.atomic_check = drm_atomic_helper_connector_tv_check,
+	.get_modes = drm_connector_helper_tv_get_modes,
 };
 
 static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 {
 	struct drm_connector *connector = &vec->connector;
+	struct drm_property *prop;
 	int ret;
 
 	connector->interlace_allowed = true;
@@ -318,8 +391,17 @@ static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 	drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
 
 	drm_object_attach_property(&connector->base,
-				   dev->mode_config.legacy_tv_mode_property,
-				   VC4_VEC_TV_MODE_NTSC);
+				   dev->mode_config.tv_mode_property,
+				   DRM_MODE_TV_MODE_NTSC);
+
+	prop = drm_property_create_enum(dev, 0, "mode",
+					legacy_tv_mode_names,
+					ARRAY_SIZE(legacy_tv_mode_names));
+	if (!prop)
+		return -ENOMEM;
+	vec->legacy_tv_mode_property = prop;
+
+	drm_object_attach_property(&connector->base, prop, VC4_VEC_TV_MODE_NTSC);
 
 	drm_connector_attach_encoder(connector, &vec->encoder.base);
 
@@ -366,13 +448,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
-	const struct vc4_vec_tv_mode *tv_mode =
-		&vc4_vec_tv_modes[conn_state->tv.legacy_mode];
+	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	if (!tv_mode)
+		goto err_dev_exit;
+
 	ret = pm_runtime_get_sync(&vec->pdev->dev);
 	if (ret < 0) {
 		DRM_ERROR("Failed to retain power domain: %d\n", ret);
@@ -454,12 +539,10 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 					struct drm_connector_state *conn_state)
 {
 	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
-	const struct vc4_vec_tv_mode *vec_mode;
+	const struct vc4_vec_tv_mode *tv_mode;
 
-	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
-
-	if (conn_state->crtc &&
-	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode, mode->htotal);
+	if (!tv_mode)
 		return -EINVAL;
 
 	if (mode->crtc_hdisplay % 4)
@@ -556,13 +639,6 @@ static const struct of_device_id vc4_vec_dt_match[] = {
 	{ /* sentinel */ },
 };
 
-static const char * const tv_mode_names[] = {
-	[VC4_VEC_TV_MODE_NTSC] = "NTSC",
-	[VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J",
-	[VC4_VEC_TV_MODE_PAL] = "PAL",
-	[VC4_VEC_TV_MODE_PAL_M] = "PAL-M",
-};
-
 static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -570,9 +646,11 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_vec *vec;
 	int ret;
 
-	ret = drm_mode_create_tv_properties_legacy(drm,
-						   ARRAY_SIZE(tv_mode_names),
-						   tv_mode_names);
+	ret = drm_mode_create_tv_properties(drm,
+					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
+					    BIT(DRM_MODE_TV_MODE_PAL) |
+					    BIT(DRM_MODE_TV_MODE_PAL_M));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 23/25] drm/vc4: vec: Convert to the new TV mode property

[Maxime Ripard]

Now that the core can deal fine with analog TV modes, let's convert the vc4
VEC driver to leverage those new features.

We've added some backward compatibility to support the old TV mode property
and translate it into the new TV norm property. We're also making use of
the new analog TV atomic_check helper to make sure we trigger a modeset
whenever the TV mode is updated.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Lookup the tv mode in atomic_check to make sure it's supported

Changes in v6:
- Use new get_modes helper

Changes in v5:
- Renamed tv_mode_names into legacy_tv_mode_names

Changes in v4:
- Removed the count variable in .get_modes
---
 drivers/gpu/drm/vc4/vc4_vec.c | 186 ++++++++++++++++++++++++++++++------------
 1 file changed, 132 insertions(+), 54 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index bfa8a58dba30..a828fc6fb776 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -172,6 +172,8 @@ struct vc4_vec {
 
 	struct clk *clock;
 
+	struct drm_property *legacy_tv_mode_property;
+
 	struct debugfs_regset32 regset;
 };
 
@@ -184,6 +186,12 @@ encoder_to_vc4_vec(struct drm_encoder *encoder)
 	return container_of(encoder, struct vc4_vec, encoder.base);
 }
 
+static inline struct vc4_vec *
+connector_to_vc4_vec(struct drm_connector *connector)
+{
+	return container_of(connector, struct vc4_vec, connector);
+}
+
 enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC,
 	VC4_VEC_TV_MODE_NTSC_J,
@@ -192,7 +200,7 @@ enum vc4_vec_tv_mode_id {
 };
 
 struct vc4_vec_tv_mode {
-	const struct drm_display_mode *mode;
+	unsigned int mode;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -225,43 +233,51 @@ static const struct debugfs_reg32 vec_regs[] = {
 	VC4_REG32(VEC_DAC_MISC),
 };
 
-static const struct drm_display_mode ntsc_mode = {
-	DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500,
-		 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0,
-		 480, 480 + 7, 480 + 7 + 6, 525, 0,
-		 DRM_MODE_FLAG_INTERLACE)
-};
-
-static const struct drm_display_mode pal_mode = {
-	DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500,
-		 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0,
-		 576, 576 + 4, 576 + 4 + 6, 625, 0,
-		 DRM_MODE_FLAG_INTERLACE)
-};
-
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
-	[VC4_VEC_TV_MODE_NTSC] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_NTSC_J] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_J,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_PAL] = {
-		.mode = &pal_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_PAL,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_PAL_M] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_M,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 };
 
+static inline const struct vc4_vec_tv_mode *
+vc4_vec_tv_mode_lookup(unsigned int mode)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
+		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
+
+		if (tv_mode->mode == mode)
+			return tv_mode;
+	}
+
+	return NULL;
+}
+
+static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
+	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
+	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+};
+
 static enum drm_connector_status
 vc4_vec_connector_detect(struct drm_connector *connector, bool force)
 {
@@ -274,21 +290,74 @@ static void vc4_vec_connector_reset(struct drm_connector *connector)
 	drm_atomic_helper_connector_tv_reset(connector);
 }
 
-static int vc4_vec_connector_get_modes(struct drm_connector *connector)
+static int
+vc4_vec_connector_set_property(struct drm_connector *connector,
+			       struct drm_connector_state *state,
+			       struct drm_property *property,
+			       uint64_t val)
 {
-	struct drm_connector_state *state = connector->state;
-	struct drm_display_mode *mode;
-
-	mode = drm_mode_duplicate(connector->dev,
-				  vc4_vec_tv_modes[state->tv.legacy_mode].mode);
-	if (!mode) {
-		DRM_ERROR("Failed to create a new display mode\n");
-		return -ENOMEM;
+	struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+	if (property != vec->legacy_tv_mode_property)
+		return -EINVAL;
+
+	switch (val) {
+	case VC4_VEC_TV_MODE_NTSC:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
+		break;
+
+	case VC4_VEC_TV_MODE_NTSC_J:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
+		break;
+
+	case VC4_VEC_TV_MODE_PAL:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL;
+		break;
+
+	case VC4_VEC_TV_MODE_PAL_M:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
+		break;
+
+	default:
+		return -EINVAL;
 	}
 
-	drm_mode_probed_add(connector, mode);
+	return 0;
+}
+
+static int
+vc4_vec_connector_get_property(struct drm_connector *connector,
+			       const struct drm_connector_state *state,
+			       struct drm_property *property,
+			       uint64_t *val)
+{
+	struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+	if (property != vec->legacy_tv_mode_property)
+		return -EINVAL;
+
+	switch (state->tv.mode) {
+	case DRM_MODE_TV_MODE_NTSC:
+		*val = VC4_VEC_TV_MODE_NTSC;
+		break;
+
+	case DRM_MODE_TV_MODE_NTSC_J:
+		*val = VC4_VEC_TV_MODE_NTSC_J;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL:
+		*val = VC4_VEC_TV_MODE_PAL;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL_M:
+		*val = VC4_VEC_TV_MODE_PAL_M;
+		break;
+
+	default:
+		return -EINVAL;
+	}
 
-	return 1;
+	return 0;
 }
 
 static const struct drm_connector_funcs vc4_vec_connector_funcs = {
@@ -297,15 +366,19 @@ static const struct drm_connector_funcs vc4_vec_connector_funcs = {
 	.reset = vc4_vec_connector_reset,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+	.atomic_get_property = vc4_vec_connector_get_property,
+	.atomic_set_property = vc4_vec_connector_set_property,
 };
 
 static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs = {
-	.get_modes = vc4_vec_connector_get_modes,
+	.atomic_check = drm_atomic_helper_connector_tv_check,
+	.get_modes = drm_connector_helper_tv_get_modes,
 };
 
 static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 {
 	struct drm_connector *connector = &vec->connector;
+	struct drm_property *prop;
 	int ret;
 
 	connector->interlace_allowed = true;
@@ -318,8 +391,17 @@ static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 	drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
 
 	drm_object_attach_property(&connector->base,
-				   dev->mode_config.legacy_tv_mode_property,
-				   VC4_VEC_TV_MODE_NTSC);
+				   dev->mode_config.tv_mode_property,
+				   DRM_MODE_TV_MODE_NTSC);
+
+	prop = drm_property_create_enum(dev, 0, "mode",
+					legacy_tv_mode_names,
+					ARRAY_SIZE(legacy_tv_mode_names));
+	if (!prop)
+		return -ENOMEM;
+	vec->legacy_tv_mode_property = prop;
+
+	drm_object_attach_property(&connector->base, prop, VC4_VEC_TV_MODE_NTSC);
 
 	drm_connector_attach_encoder(connector, &vec->encoder.base);
 
@@ -366,13 +448,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
-	const struct vc4_vec_tv_mode *tv_mode =
-		&vc4_vec_tv_modes[conn_state->tv.legacy_mode];
+	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	if (!tv_mode)
+		goto err_dev_exit;
+
 	ret = pm_runtime_get_sync(&vec->pdev->dev);
 	if (ret < 0) {
 		DRM_ERROR("Failed to retain power domain: %d\n", ret);
@@ -454,12 +539,10 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 					struct drm_connector_state *conn_state)
 {
 	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
-	const struct vc4_vec_tv_mode *vec_mode;
+	const struct vc4_vec_tv_mode *tv_mode;
 
-	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
-
-	if (conn_state->crtc &&
-	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode, mode->htotal);
+	if (!tv_mode)
 		return -EINVAL;
 
 	if (mode->crtc_hdisplay % 4)
@@ -556,13 +639,6 @@ static const struct of_device_id vc4_vec_dt_match[] = {
 	{ /* sentinel */ },
 };
 
-static const char * const tv_mode_names[] = {
-	[VC4_VEC_TV_MODE_NTSC] = "NTSC",
-	[VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J",
-	[VC4_VEC_TV_MODE_PAL] = "PAL",
-	[VC4_VEC_TV_MODE_PAL_M] = "PAL-M",
-};
-
 static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -570,9 +646,11 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_vec *vec;
 	int ret;
 
-	ret = drm_mode_create_tv_properties_legacy(drm,
-						   ARRAY_SIZE(tv_mode_names),
-						   tv_mode_names);
+	ret = drm_mode_create_tv_properties(drm,
+					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
+					    BIT(DRM_MODE_TV_MODE_PAL) |
+					    BIT(DRM_MODE_TV_MODE_PAL_M));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 23/25] drm/vc4: vec: Convert to the new TV mode property

[Maxime Ripard]

Now that the core can deal fine with analog TV modes, let's convert the vc4
VEC driver to leverage those new features.

We've added some backward compatibility to support the old TV mode property
and translate it into the new TV norm property. We're also making use of
the new analog TV atomic_check helper to make sure we trigger a modeset
whenever the TV mode is updated.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v7:
- Lookup the tv mode in atomic_check to make sure it's supported

Changes in v6:
- Use new get_modes helper

Changes in v5:
- Renamed tv_mode_names into legacy_tv_mode_names

Changes in v4:
- Removed the count variable in .get_modes
---
 drivers/gpu/drm/vc4/vc4_vec.c | 186 ++++++++++++++++++++++++++++++------------
 1 file changed, 132 insertions(+), 54 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index bfa8a58dba30..a828fc6fb776 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -172,6 +172,8 @@ struct vc4_vec {
 
 	struct clk *clock;
 
+	struct drm_property *legacy_tv_mode_property;
+
 	struct debugfs_regset32 regset;
 };
 
@@ -184,6 +186,12 @@ encoder_to_vc4_vec(struct drm_encoder *encoder)
 	return container_of(encoder, struct vc4_vec, encoder.base);
 }
 
+static inline struct vc4_vec *
+connector_to_vc4_vec(struct drm_connector *connector)
+{
+	return container_of(connector, struct vc4_vec, connector);
+}
+
 enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC,
 	VC4_VEC_TV_MODE_NTSC_J,
@@ -192,7 +200,7 @@ enum vc4_vec_tv_mode_id {
 };
 
 struct vc4_vec_tv_mode {
-	const struct drm_display_mode *mode;
+	unsigned int mode;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -225,43 +233,51 @@ static const struct debugfs_reg32 vec_regs[] = {
 	VC4_REG32(VEC_DAC_MISC),
 };
 
-static const struct drm_display_mode ntsc_mode = {
-	DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500,
-		 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0,
-		 480, 480 + 7, 480 + 7 + 6, 525, 0,
-		 DRM_MODE_FLAG_INTERLACE)
-};
-
-static const struct drm_display_mode pal_mode = {
-	DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500,
-		 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0,
-		 576, 576 + 4, 576 + 4 + 6, 625, 0,
-		 DRM_MODE_FLAG_INTERLACE)
-};
-
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
-	[VC4_VEC_TV_MODE_NTSC] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_NTSC_J] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_J,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_PAL] = {
-		.mode = &pal_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_PAL,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
-	[VC4_VEC_TV_MODE_PAL_M] = {
-		.mode = &ntsc_mode,
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_M,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 };
 
+static inline const struct vc4_vec_tv_mode *
+vc4_vec_tv_mode_lookup(unsigned int mode)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
+		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
+
+		if (tv_mode->mode == mode)
+			return tv_mode;
+	}
+
+	return NULL;
+}
+
+static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
+	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
+	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+};
+
 static enum drm_connector_status
 vc4_vec_connector_detect(struct drm_connector *connector, bool force)
 {
@@ -274,21 +290,74 @@ static void vc4_vec_connector_reset(struct drm_connector *connector)
 	drm_atomic_helper_connector_tv_reset(connector);
 }
 
-static int vc4_vec_connector_get_modes(struct drm_connector *connector)
+static int
+vc4_vec_connector_set_property(struct drm_connector *connector,
+			       struct drm_connector_state *state,
+			       struct drm_property *property,
+			       uint64_t val)
 {
-	struct drm_connector_state *state = connector->state;
-	struct drm_display_mode *mode;
-
-	mode = drm_mode_duplicate(connector->dev,
-				  vc4_vec_tv_modes[state->tv.legacy_mode].mode);
-	if (!mode) {
-		DRM_ERROR("Failed to create a new display mode\n");
-		return -ENOMEM;
+	struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+	if (property != vec->legacy_tv_mode_property)
+		return -EINVAL;
+
+	switch (val) {
+	case VC4_VEC_TV_MODE_NTSC:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
+		break;
+
+	case VC4_VEC_TV_MODE_NTSC_J:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
+		break;
+
+	case VC4_VEC_TV_MODE_PAL:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL;
+		break;
+
+	case VC4_VEC_TV_MODE_PAL_M:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
+		break;
+
+	default:
+		return -EINVAL;
 	}
 
-	drm_mode_probed_add(connector, mode);
+	return 0;
+}
+
+static int
+vc4_vec_connector_get_property(struct drm_connector *connector,
+			       const struct drm_connector_state *state,
+			       struct drm_property *property,
+			       uint64_t *val)
+{
+	struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+	if (property != vec->legacy_tv_mode_property)
+		return -EINVAL;
+
+	switch (state->tv.mode) {
+	case DRM_MODE_TV_MODE_NTSC:
+		*val = VC4_VEC_TV_MODE_NTSC;
+		break;
+
+	case DRM_MODE_TV_MODE_NTSC_J:
+		*val = VC4_VEC_TV_MODE_NTSC_J;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL:
+		*val = VC4_VEC_TV_MODE_PAL;
+		break;
+
+	case DRM_MODE_TV_MODE_PAL_M:
+		*val = VC4_VEC_TV_MODE_PAL_M;
+		break;
+
+	default:
+		return -EINVAL;
+	}
 
-	return 1;
+	return 0;
 }
 
 static const struct drm_connector_funcs vc4_vec_connector_funcs = {
@@ -297,15 +366,19 @@ static const struct drm_connector_funcs vc4_vec_connector_funcs = {
 	.reset = vc4_vec_connector_reset,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+	.atomic_get_property = vc4_vec_connector_get_property,
+	.atomic_set_property = vc4_vec_connector_set_property,
 };
 
 static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs = {
-	.get_modes = vc4_vec_connector_get_modes,
+	.atomic_check = drm_atomic_helper_connector_tv_check,
+	.get_modes = drm_connector_helper_tv_get_modes,
 };
 
 static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 {
 	struct drm_connector *connector = &vec->connector;
+	struct drm_property *prop;
 	int ret;
 
 	connector->interlace_allowed = true;
@@ -318,8 +391,17 @@ static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
 	drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
 
 	drm_object_attach_property(&connector->base,
-				   dev->mode_config.legacy_tv_mode_property,
-				   VC4_VEC_TV_MODE_NTSC);
+				   dev->mode_config.tv_mode_property,
+				   DRM_MODE_TV_MODE_NTSC);
+
+	prop = drm_property_create_enum(dev, 0, "mode",
+					legacy_tv_mode_names,
+					ARRAY_SIZE(legacy_tv_mode_names));
+	if (!prop)
+		return -ENOMEM;
+	vec->legacy_tv_mode_property = prop;
+
+	drm_object_attach_property(&connector->base, prop, VC4_VEC_TV_MODE_NTSC);
 
 	drm_connector_attach_encoder(connector, &vec->encoder.base);
 
@@ -366,13 +448,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
-	const struct vc4_vec_tv_mode *tv_mode =
-		&vc4_vec_tv_modes[conn_state->tv.legacy_mode];
+	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	if (!tv_mode)
+		goto err_dev_exit;
+
 	ret = pm_runtime_get_sync(&vec->pdev->dev);
 	if (ret < 0) {
 		DRM_ERROR("Failed to retain power domain: %d\n", ret);
@@ -454,12 +539,10 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder,
 					struct drm_connector_state *conn_state)
 {
 	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
-	const struct vc4_vec_tv_mode *vec_mode;
+	const struct vc4_vec_tv_mode *tv_mode;
 
-	vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
-
-	if (conn_state->crtc &&
-	    !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode, mode->htotal);
+	if (!tv_mode)
 		return -EINVAL;
 
 	if (mode->crtc_hdisplay % 4)
@@ -556,13 +639,6 @@ static const struct of_device_id vc4_vec_dt_match[] = {
 	{ /* sentinel */ },
 };
 
-static const char * const tv_mode_names[] = {
-	[VC4_VEC_TV_MODE_NTSC] = "NTSC",
-	[VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J",
-	[VC4_VEC_TV_MODE_PAL] = "PAL",
-	[VC4_VEC_TV_MODE_PAL_M] = "PAL-M",
-};
-
 static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -570,9 +646,11 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_vec *vec;
 	int ret;
 
-	ret = drm_mode_create_tv_properties_legacy(drm,
-						   ARRAY_SIZE(tv_mode_names),
-						   tv_mode_names);
+	ret = drm_mode_create_tv_properties(drm,
+					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
+					    BIT(DRM_MODE_TV_MODE_PAL) |
+					    BIT(DRM_MODE_TV_MODE_PAL_M));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 24/25] drm/vc4: vec: Add support for more analog TV standards

[Maxime Ripard]

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):

- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
  4.43361875 MHz (the PAL subcarrier frequency). Never used for
  broadcasting, but sometimes used as a hack to play NTSC content in PAL
  regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
  3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
  and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
  frequency. Another non-standard, non-broadcast mode, used in similar
  contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
  been broadcast in Eastern Europe and various parts of Africa and Asia.
  Uses the same 576i50 timings as PAL.

Also added some comments explaining color subcarrier frequency
registers.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Support PAL60 again
---
 drivers/gpu/drm/vc4/vc4_vec.c | 111 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 107 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index a828fc6fb776..d23dbad3cbf6 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -46,6 +46,7 @@
 #define VEC_CONFIG0_YDEL(x)		((x) << 26)
 #define VEC_CONFIG0_CDEL_MASK		GENMASK(25, 24)
 #define VEC_CONFIG0_CDEL(x)		((x) << 24)
+#define VEC_CONFIG0_SECAM_STD		BIT(21)
 #define VEC_CONFIG0_PBPR_FIL		BIT(18)
 #define VEC_CONFIG0_CHROMA_GAIN_MASK	GENMASK(17, 16)
 #define VEC_CONFIG0_CHROMA_GAIN_UNITY	(0 << 16)
@@ -76,6 +77,27 @@
 #define VEC_SOFT_RESET			0x10c
 #define VEC_CLMP0_START			0x144
 #define VEC_CLMP0_END			0x148
+
+/*
+ * These set the color subcarrier frequency
+ * if VEC_CONFIG1_CUSTOM_FREQ is enabled.
+ *
+ * VEC_FREQ1_0 contains the most significant 16-bit half-word,
+ * VEC_FREQ3_2 contains the least significant 16-bit half-word.
+ * 0x80000000 seems to be equivalent to the pixel clock
+ * (which itself is the VEC clock divided by 8).
+ *
+ * Reference values (with the default pixel clock of 13.5 MHz):
+ *
+ * NTSC  (3579545.[45] Hz)     - 0x21F07C1F
+ * PAL   (4433618.75 Hz)       - 0x2A098ACB
+ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3
+ * PAL-N (3582056.25 Hz)       - 0x21F69446
+ *
+ * NOTE: For SECAM, it is used as the Dr center frequency,
+ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not;
+ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72.
+ */
 #define VEC_FREQ3_2			0x180
 #define VEC_FREQ1_0			0x184
 
@@ -118,6 +140,14 @@
 
 #define VEC_INTERRUPT_CONTROL		0x190
 #define VEC_INTERRUPT_STATUS		0x194
+
+/*
+ * Db center frequency for SECAM; the clock for this is the same as for
+ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency.
+ *
+ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13.
+ * That is also the default value, so no need to set it explicitly.
+ */
 #define VEC_FCW_SECAM_B			0x198
 #define VEC_SECAM_GAIN_VAL		0x19c
 
@@ -197,10 +227,15 @@ enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC_J,
 	VC4_VEC_TV_MODE_PAL,
 	VC4_VEC_TV_MODE_PAL_M,
+	VC4_VEC_TV_MODE_NTSC_443,
+	VC4_VEC_TV_MODE_PAL_60,
+	VC4_VEC_TV_MODE_PAL_N,
+	VC4_VEC_TV_MODE_SECAM,
 };
 
 struct vc4_vec_tv_mode {
 	unsigned int mode;
+	u16 expected_htotal;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -236,35 +271,68 @@ static const struct debugfs_reg32 vec_regs[] = {
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_443,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_NTSC_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC_J,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		/* PAL-60 */
+		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_PAL_M_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL_M,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_N,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_PAL_N_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	{
+		.mode = DRM_MODE_TV_MODE_SECAM,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_SECAM_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+		.custom_freq = 0x29c71c72,
+	},
 };
 
 static inline const struct vc4_vec_tv_mode *
-vc4_vec_tv_mode_lookup(unsigned int mode)
+vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
 		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
 
-		if (tv_mode->mode == mode)
+		if (tv_mode->mode == mode &&
+		    tv_mode->expected_htotal == htotal)
 			return tv_mode;
 	}
 
@@ -273,9 +341,13 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
 
 static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
 	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
 	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
 	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_60, "PAL-60", },
 	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+	{ VC4_VEC_TV_MODE_PAL_N, "PAL-N", },
+	{ VC4_VEC_TV_MODE_SECAM, "SECAM", },
 };
 
 static enum drm_connector_status
@@ -306,11 +378,16 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
 		break;
 
+	case VC4_VEC_TV_MODE_NTSC_443:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_443;
+		break;
+
 	case VC4_VEC_TV_MODE_NTSC_J:
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
 		break;
 
 	case VC4_VEC_TV_MODE_PAL:
+	case VC4_VEC_TV_MODE_PAL_60:
 		state->tv.mode = DRM_MODE_TV_MODE_PAL;
 		break;
 
@@ -318,6 +395,14 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
 		break;
 
+	case VC4_VEC_TV_MODE_PAL_N:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_N;
+		break;
+
+	case VC4_VEC_TV_MODE_SECAM:
+		state->tv.mode = DRM_MODE_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -341,6 +426,10 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_NTSC;
 		break;
 
+	case DRM_MODE_TV_MODE_NTSC_443:
+		*val = VC4_VEC_TV_MODE_NTSC_443;
+		break;
+
 	case DRM_MODE_TV_MODE_NTSC_J:
 		*val = VC4_VEC_TV_MODE_NTSC_J;
 		break;
@@ -353,6 +442,14 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_PAL_M;
 		break;
 
+	case DRM_MODE_TV_MODE_PAL_N:
+		*val = VC4_VEC_TV_MODE_PAL_N;
+		break;
+
+	case DRM_MODE_TV_MODE_SECAM:
+		*val = VC4_VEC_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -448,13 +545,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_display_mode *adjusted_mode =
+		&encoder->crtc->state->adjusted_mode;
 	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode,
+					 adjusted_mode->htotal);
 	if (!tv_mode)
 		goto err_dev_exit;
 
@@ -648,9 +748,12 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 
 	ret = drm_mode_create_tv_properties(drm,
 					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_443) |
 					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
 					    BIT(DRM_MODE_TV_MODE_PAL) |
-					    BIT(DRM_MODE_TV_MODE_PAL_M));
+					    BIT(DRM_MODE_TV_MODE_PAL_M) |
+					    BIT(DRM_MODE_TV_MODE_PAL_N) |
+					    BIT(DRM_MODE_TV_MODE_SECAM));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 24/25] drm/vc4: vec: Add support for more analog TV standards

[Maxime Ripard]

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):

- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
  4.43361875 MHz (the PAL subcarrier frequency). Never used for
  broadcasting, but sometimes used as a hack to play NTSC content in PAL
  regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
  3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
  and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
  frequency. Another non-standard, non-broadcast mode, used in similar
  contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
  been broadcast in Eastern Europe and various parts of Africa and Asia.
  Uses the same 576i50 timings as PAL.

Also added some comments explaining color subcarrier frequency
registers.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Support PAL60 again
---
 drivers/gpu/drm/vc4/vc4_vec.c | 111 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 107 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index a828fc6fb776..d23dbad3cbf6 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -46,6 +46,7 @@
 #define VEC_CONFIG0_YDEL(x)		((x) << 26)
 #define VEC_CONFIG0_CDEL_MASK		GENMASK(25, 24)
 #define VEC_CONFIG0_CDEL(x)		((x) << 24)
+#define VEC_CONFIG0_SECAM_STD		BIT(21)
 #define VEC_CONFIG0_PBPR_FIL		BIT(18)
 #define VEC_CONFIG0_CHROMA_GAIN_MASK	GENMASK(17, 16)
 #define VEC_CONFIG0_CHROMA_GAIN_UNITY	(0 << 16)
@@ -76,6 +77,27 @@
 #define VEC_SOFT_RESET			0x10c
 #define VEC_CLMP0_START			0x144
 #define VEC_CLMP0_END			0x148
+
+/*
+ * These set the color subcarrier frequency
+ * if VEC_CONFIG1_CUSTOM_FREQ is enabled.
+ *
+ * VEC_FREQ1_0 contains the most significant 16-bit half-word,
+ * VEC_FREQ3_2 contains the least significant 16-bit half-word.
+ * 0x80000000 seems to be equivalent to the pixel clock
+ * (which itself is the VEC clock divided by 8).
+ *
+ * Reference values (with the default pixel clock of 13.5 MHz):
+ *
+ * NTSC  (3579545.[45] Hz)     - 0x21F07C1F
+ * PAL   (4433618.75 Hz)       - 0x2A098ACB
+ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3
+ * PAL-N (3582056.25 Hz)       - 0x21F69446
+ *
+ * NOTE: For SECAM, it is used as the Dr center frequency,
+ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not;
+ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72.
+ */
 #define VEC_FREQ3_2			0x180
 #define VEC_FREQ1_0			0x184
 
@@ -118,6 +140,14 @@
 
 #define VEC_INTERRUPT_CONTROL		0x190
 #define VEC_INTERRUPT_STATUS		0x194
+
+/*
+ * Db center frequency for SECAM; the clock for this is the same as for
+ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency.
+ *
+ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13.
+ * That is also the default value, so no need to set it explicitly.
+ */
 #define VEC_FCW_SECAM_B			0x198
 #define VEC_SECAM_GAIN_VAL		0x19c
 
@@ -197,10 +227,15 @@ enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC_J,
 	VC4_VEC_TV_MODE_PAL,
 	VC4_VEC_TV_MODE_PAL_M,
+	VC4_VEC_TV_MODE_NTSC_443,
+	VC4_VEC_TV_MODE_PAL_60,
+	VC4_VEC_TV_MODE_PAL_N,
+	VC4_VEC_TV_MODE_SECAM,
 };
 
 struct vc4_vec_tv_mode {
 	unsigned int mode;
+	u16 expected_htotal;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -236,35 +271,68 @@ static const struct debugfs_reg32 vec_regs[] = {
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_443,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_NTSC_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC_J,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		/* PAL-60 */
+		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_PAL_M_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL_M,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_N,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_PAL_N_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	{
+		.mode = DRM_MODE_TV_MODE_SECAM,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_SECAM_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+		.custom_freq = 0x29c71c72,
+	},
 };
 
 static inline const struct vc4_vec_tv_mode *
-vc4_vec_tv_mode_lookup(unsigned int mode)
+vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
 		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
 
-		if (tv_mode->mode == mode)
+		if (tv_mode->mode == mode &&
+		    tv_mode->expected_htotal == htotal)
 			return tv_mode;
 	}
 
@@ -273,9 +341,13 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
 
 static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
 	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
 	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
 	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_60, "PAL-60", },
 	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+	{ VC4_VEC_TV_MODE_PAL_N, "PAL-N", },
+	{ VC4_VEC_TV_MODE_SECAM, "SECAM", },
 };
 
 static enum drm_connector_status
@@ -306,11 +378,16 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
 		break;
 
+	case VC4_VEC_TV_MODE_NTSC_443:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_443;
+		break;
+
 	case VC4_VEC_TV_MODE_NTSC_J:
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
 		break;
 
 	case VC4_VEC_TV_MODE_PAL:
+	case VC4_VEC_TV_MODE_PAL_60:
 		state->tv.mode = DRM_MODE_TV_MODE_PAL;
 		break;
 
@@ -318,6 +395,14 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
 		break;
 
+	case VC4_VEC_TV_MODE_PAL_N:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_N;
+		break;
+
+	case VC4_VEC_TV_MODE_SECAM:
+		state->tv.mode = DRM_MODE_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -341,6 +426,10 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_NTSC;
 		break;
 
+	case DRM_MODE_TV_MODE_NTSC_443:
+		*val = VC4_VEC_TV_MODE_NTSC_443;
+		break;
+
 	case DRM_MODE_TV_MODE_NTSC_J:
 		*val = VC4_VEC_TV_MODE_NTSC_J;
 		break;
@@ -353,6 +442,14 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_PAL_M;
 		break;
 
+	case DRM_MODE_TV_MODE_PAL_N:
+		*val = VC4_VEC_TV_MODE_PAL_N;
+		break;
+
+	case DRM_MODE_TV_MODE_SECAM:
+		*val = VC4_VEC_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -448,13 +545,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_display_mode *adjusted_mode =
+		&encoder->crtc->state->adjusted_mode;
 	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode,
+					 adjusted_mode->htotal);
 	if (!tv_mode)
 		goto err_dev_exit;
 
@@ -648,9 +748,12 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 
 	ret = drm_mode_create_tv_properties(drm,
 					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_443) |
 					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
 					    BIT(DRM_MODE_TV_MODE_PAL) |
-					    BIT(DRM_MODE_TV_MODE_PAL_M));
+					    BIT(DRM_MODE_TV_MODE_PAL_M) |
+					    BIT(DRM_MODE_TV_MODE_PAL_N) |
+					    BIT(DRM_MODE_TV_MODE_SECAM));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 24/25] drm/vc4: vec: Add support for more analog TV standards

[Maxime Ripard]

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):

- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
  4.43361875 MHz (the PAL subcarrier frequency). Never used for
  broadcasting, but sometimes used as a hack to play NTSC content in PAL
  regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
  3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
  and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
  frequency. Another non-standard, non-broadcast mode, used in similar
  contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
  been broadcast in Eastern Europe and various parts of Africa and Asia.
  Uses the same 576i50 timings as PAL.

Also added some comments explaining color subcarrier frequency
registers.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Support PAL60 again
---
 drivers/gpu/drm/vc4/vc4_vec.c | 111 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 107 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index a828fc6fb776..d23dbad3cbf6 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -46,6 +46,7 @@
 #define VEC_CONFIG0_YDEL(x)		((x) << 26)
 #define VEC_CONFIG0_CDEL_MASK		GENMASK(25, 24)
 #define VEC_CONFIG0_CDEL(x)		((x) << 24)
+#define VEC_CONFIG0_SECAM_STD		BIT(21)
 #define VEC_CONFIG0_PBPR_FIL		BIT(18)
 #define VEC_CONFIG0_CHROMA_GAIN_MASK	GENMASK(17, 16)
 #define VEC_CONFIG0_CHROMA_GAIN_UNITY	(0 << 16)
@@ -76,6 +77,27 @@
 #define VEC_SOFT_RESET			0x10c
 #define VEC_CLMP0_START			0x144
 #define VEC_CLMP0_END			0x148
+
+/*
+ * These set the color subcarrier frequency
+ * if VEC_CONFIG1_CUSTOM_FREQ is enabled.
+ *
+ * VEC_FREQ1_0 contains the most significant 16-bit half-word,
+ * VEC_FREQ3_2 contains the least significant 16-bit half-word.
+ * 0x80000000 seems to be equivalent to the pixel clock
+ * (which itself is the VEC clock divided by 8).
+ *
+ * Reference values (with the default pixel clock of 13.5 MHz):
+ *
+ * NTSC  (3579545.[45] Hz)     - 0x21F07C1F
+ * PAL   (4433618.75 Hz)       - 0x2A098ACB
+ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3
+ * PAL-N (3582056.25 Hz)       - 0x21F69446
+ *
+ * NOTE: For SECAM, it is used as the Dr center frequency,
+ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not;
+ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72.
+ */
 #define VEC_FREQ3_2			0x180
 #define VEC_FREQ1_0			0x184
 
@@ -118,6 +140,14 @@
 
 #define VEC_INTERRUPT_CONTROL		0x190
 #define VEC_INTERRUPT_STATUS		0x194
+
+/*
+ * Db center frequency for SECAM; the clock for this is the same as for
+ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency.
+ *
+ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13.
+ * That is also the default value, so no need to set it explicitly.
+ */
 #define VEC_FCW_SECAM_B			0x198
 #define VEC_SECAM_GAIN_VAL		0x19c
 
@@ -197,10 +227,15 @@ enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC_J,
 	VC4_VEC_TV_MODE_PAL,
 	VC4_VEC_TV_MODE_PAL_M,
+	VC4_VEC_TV_MODE_NTSC_443,
+	VC4_VEC_TV_MODE_PAL_60,
+	VC4_VEC_TV_MODE_PAL_N,
+	VC4_VEC_TV_MODE_SECAM,
 };
 
 struct vc4_vec_tv_mode {
 	unsigned int mode;
+	u16 expected_htotal;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -236,35 +271,68 @@ static const struct debugfs_reg32 vec_regs[] = {
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_443,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_NTSC_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC_J,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		/* PAL-60 */
+		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_PAL_M_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL_M,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_N,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_PAL_N_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	{
+		.mode = DRM_MODE_TV_MODE_SECAM,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_SECAM_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+		.custom_freq = 0x29c71c72,
+	},
 };
 
 static inline const struct vc4_vec_tv_mode *
-vc4_vec_tv_mode_lookup(unsigned int mode)
+vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
 		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
 
-		if (tv_mode->mode == mode)
+		if (tv_mode->mode == mode &&
+		    tv_mode->expected_htotal == htotal)
 			return tv_mode;
 	}
 
@@ -273,9 +341,13 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
 
 static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
 	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
 	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
 	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_60, "PAL-60", },
 	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+	{ VC4_VEC_TV_MODE_PAL_N, "PAL-N", },
+	{ VC4_VEC_TV_MODE_SECAM, "SECAM", },
 };
 
 static enum drm_connector_status
@@ -306,11 +378,16 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
 		break;
 
+	case VC4_VEC_TV_MODE_NTSC_443:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_443;
+		break;
+
 	case VC4_VEC_TV_MODE_NTSC_J:
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
 		break;
 
 	case VC4_VEC_TV_MODE_PAL:
+	case VC4_VEC_TV_MODE_PAL_60:
 		state->tv.mode = DRM_MODE_TV_MODE_PAL;
 		break;
 
@@ -318,6 +395,14 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
 		break;
 
+	case VC4_VEC_TV_MODE_PAL_N:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_N;
+		break;
+
+	case VC4_VEC_TV_MODE_SECAM:
+		state->tv.mode = DRM_MODE_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -341,6 +426,10 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_NTSC;
 		break;
 
+	case DRM_MODE_TV_MODE_NTSC_443:
+		*val = VC4_VEC_TV_MODE_NTSC_443;
+		break;
+
 	case DRM_MODE_TV_MODE_NTSC_J:
 		*val = VC4_VEC_TV_MODE_NTSC_J;
 		break;
@@ -353,6 +442,14 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_PAL_M;
 		break;
 
+	case DRM_MODE_TV_MODE_PAL_N:
+		*val = VC4_VEC_TV_MODE_PAL_N;
+		break;
+
+	case DRM_MODE_TV_MODE_SECAM:
+		*val = VC4_VEC_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -448,13 +545,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_display_mode *adjusted_mode =
+		&encoder->crtc->state->adjusted_mode;
 	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode,
+					 adjusted_mode->htotal);
 	if (!tv_mode)
 		goto err_dev_exit;
 
@@ -648,9 +748,12 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 
 	ret = drm_mode_create_tv_properties(drm,
 					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_443) |
 					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
 					    BIT(DRM_MODE_TV_MODE_PAL) |
-					    BIT(DRM_MODE_TV_MODE_PAL_M));
+					    BIT(DRM_MODE_TV_MODE_PAL_M) |
+					    BIT(DRM_MODE_TV_MODE_PAL_N) |
+					    BIT(DRM_MODE_TV_MODE_SECAM));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 24/25] drm/vc4: vec: Add support for more analog TV standards

[Maxime Ripard]

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):

- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
  4.43361875 MHz (the PAL subcarrier frequency). Never used for
  broadcasting, but sometimes used as a hack to play NTSC content in PAL
  regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
  3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
  and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
  frequency. Another non-standard, non-broadcast mode, used in similar
  contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
  been broadcast in Eastern Europe and various parts of Africa and Asia.
  Uses the same 576i50 timings as PAL.

Also added some comments explaining color subcarrier frequency
registers.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Support PAL60 again
---
 drivers/gpu/drm/vc4/vc4_vec.c | 111 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 107 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index a828fc6fb776..d23dbad3cbf6 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -46,6 +46,7 @@
 #define VEC_CONFIG0_YDEL(x)		((x) << 26)
 #define VEC_CONFIG0_CDEL_MASK		GENMASK(25, 24)
 #define VEC_CONFIG0_CDEL(x)		((x) << 24)
+#define VEC_CONFIG0_SECAM_STD		BIT(21)
 #define VEC_CONFIG0_PBPR_FIL		BIT(18)
 #define VEC_CONFIG0_CHROMA_GAIN_MASK	GENMASK(17, 16)
 #define VEC_CONFIG0_CHROMA_GAIN_UNITY	(0 << 16)
@@ -76,6 +77,27 @@
 #define VEC_SOFT_RESET			0x10c
 #define VEC_CLMP0_START			0x144
 #define VEC_CLMP0_END			0x148
+
+/*
+ * These set the color subcarrier frequency
+ * if VEC_CONFIG1_CUSTOM_FREQ is enabled.
+ *
+ * VEC_FREQ1_0 contains the most significant 16-bit half-word,
+ * VEC_FREQ3_2 contains the least significant 16-bit half-word.
+ * 0x80000000 seems to be equivalent to the pixel clock
+ * (which itself is the VEC clock divided by 8).
+ *
+ * Reference values (with the default pixel clock of 13.5 MHz):
+ *
+ * NTSC  (3579545.[45] Hz)     - 0x21F07C1F
+ * PAL   (4433618.75 Hz)       - 0x2A098ACB
+ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3
+ * PAL-N (3582056.25 Hz)       - 0x21F69446
+ *
+ * NOTE: For SECAM, it is used as the Dr center frequency,
+ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not;
+ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72.
+ */
 #define VEC_FREQ3_2			0x180
 #define VEC_FREQ1_0			0x184
 
@@ -118,6 +140,14 @@
 
 #define VEC_INTERRUPT_CONTROL		0x190
 #define VEC_INTERRUPT_STATUS		0x194
+
+/*
+ * Db center frequency for SECAM; the clock for this is the same as for
+ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency.
+ *
+ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13.
+ * That is also the default value, so no need to set it explicitly.
+ */
 #define VEC_FCW_SECAM_B			0x198
 #define VEC_SECAM_GAIN_VAL		0x19c
 
@@ -197,10 +227,15 @@ enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC_J,
 	VC4_VEC_TV_MODE_PAL,
 	VC4_VEC_TV_MODE_PAL_M,
+	VC4_VEC_TV_MODE_NTSC_443,
+	VC4_VEC_TV_MODE_PAL_60,
+	VC4_VEC_TV_MODE_PAL_N,
+	VC4_VEC_TV_MODE_SECAM,
 };
 
 struct vc4_vec_tv_mode {
 	unsigned int mode;
+	u16 expected_htotal;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -236,35 +271,68 @@ static const struct debugfs_reg32 vec_regs[] = {
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_443,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_NTSC_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC_J,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		/* PAL-60 */
+		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_PAL_M_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL_M,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_N,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_PAL_N_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	{
+		.mode = DRM_MODE_TV_MODE_SECAM,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_SECAM_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+		.custom_freq = 0x29c71c72,
+	},
 };
 
 static inline const struct vc4_vec_tv_mode *
-vc4_vec_tv_mode_lookup(unsigned int mode)
+vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
 		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
 
-		if (tv_mode->mode == mode)
+		if (tv_mode->mode == mode &&
+		    tv_mode->expected_htotal == htotal)
 			return tv_mode;
 	}
 
@@ -273,9 +341,13 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
 
 static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
 	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
 	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
 	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_60, "PAL-60", },
 	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+	{ VC4_VEC_TV_MODE_PAL_N, "PAL-N", },
+	{ VC4_VEC_TV_MODE_SECAM, "SECAM", },
 };
 
 static enum drm_connector_status
@@ -306,11 +378,16 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
 		break;
 
+	case VC4_VEC_TV_MODE_NTSC_443:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_443;
+		break;
+
 	case VC4_VEC_TV_MODE_NTSC_J:
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
 		break;
 
 	case VC4_VEC_TV_MODE_PAL:
+	case VC4_VEC_TV_MODE_PAL_60:
 		state->tv.mode = DRM_MODE_TV_MODE_PAL;
 		break;
 
@@ -318,6 +395,14 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
 		break;
 
+	case VC4_VEC_TV_MODE_PAL_N:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_N;
+		break;
+
+	case VC4_VEC_TV_MODE_SECAM:
+		state->tv.mode = DRM_MODE_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -341,6 +426,10 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_NTSC;
 		break;
 
+	case DRM_MODE_TV_MODE_NTSC_443:
+		*val = VC4_VEC_TV_MODE_NTSC_443;
+		break;
+
 	case DRM_MODE_TV_MODE_NTSC_J:
 		*val = VC4_VEC_TV_MODE_NTSC_J;
 		break;
@@ -353,6 +442,14 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_PAL_M;
 		break;
 
+	case DRM_MODE_TV_MODE_PAL_N:
+		*val = VC4_VEC_TV_MODE_PAL_N;
+		break;
+
+	case DRM_MODE_TV_MODE_SECAM:
+		*val = VC4_VEC_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -448,13 +545,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_display_mode *adjusted_mode =
+		&encoder->crtc->state->adjusted_mode;
 	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode,
+					 adjusted_mode->htotal);
 	if (!tv_mode)
 		goto err_dev_exit;
 
@@ -648,9 +748,12 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 
 	ret = drm_mode_create_tv_properties(drm,
 					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_443) |
 					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
 					    BIT(DRM_MODE_TV_MODE_PAL) |
-					    BIT(DRM_MODE_TV_MODE_PAL_M));
+					    BIT(DRM_MODE_TV_MODE_PAL_M) |
+					    BIT(DRM_MODE_TV_MODE_PAL_N) |
+					    BIT(DRM_MODE_TV_MODE_SECAM));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 24/25] drm/vc4: vec: Add support for more analog TV standards

[Maxime Ripard]

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):

- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
  4.43361875 MHz (the PAL subcarrier frequency). Never used for
  broadcasting, but sometimes used as a hack to play NTSC content in PAL
  regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
  3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
  and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
  frequency. Another non-standard, non-broadcast mode, used in similar
  contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
  been broadcast in Eastern Europe and various parts of Africa and Asia.
  Uses the same 576i50 timings as PAL.

Also added some comments explaining color subcarrier frequency
registers.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Support PAL60 again
---
 drivers/gpu/drm/vc4/vc4_vec.c | 111 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 107 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index a828fc6fb776..d23dbad3cbf6 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -46,6 +46,7 @@
 #define VEC_CONFIG0_YDEL(x)		((x) << 26)
 #define VEC_CONFIG0_CDEL_MASK		GENMASK(25, 24)
 #define VEC_CONFIG0_CDEL(x)		((x) << 24)
+#define VEC_CONFIG0_SECAM_STD		BIT(21)
 #define VEC_CONFIG0_PBPR_FIL		BIT(18)
 #define VEC_CONFIG0_CHROMA_GAIN_MASK	GENMASK(17, 16)
 #define VEC_CONFIG0_CHROMA_GAIN_UNITY	(0 << 16)
@@ -76,6 +77,27 @@
 #define VEC_SOFT_RESET			0x10c
 #define VEC_CLMP0_START			0x144
 #define VEC_CLMP0_END			0x148
+
+/*
+ * These set the color subcarrier frequency
+ * if VEC_CONFIG1_CUSTOM_FREQ is enabled.
+ *
+ * VEC_FREQ1_0 contains the most significant 16-bit half-word,
+ * VEC_FREQ3_2 contains the least significant 16-bit half-word.
+ * 0x80000000 seems to be equivalent to the pixel clock
+ * (which itself is the VEC clock divided by 8).
+ *
+ * Reference values (with the default pixel clock of 13.5 MHz):
+ *
+ * NTSC  (3579545.[45] Hz)     - 0x21F07C1F
+ * PAL   (4433618.75 Hz)       - 0x2A098ACB
+ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3
+ * PAL-N (3582056.25 Hz)       - 0x21F69446
+ *
+ * NOTE: For SECAM, it is used as the Dr center frequency,
+ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not;
+ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72.
+ */
 #define VEC_FREQ3_2			0x180
 #define VEC_FREQ1_0			0x184
 
@@ -118,6 +140,14 @@
 
 #define VEC_INTERRUPT_CONTROL		0x190
 #define VEC_INTERRUPT_STATUS		0x194
+
+/*
+ * Db center frequency for SECAM; the clock for this is the same as for
+ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency.
+ *
+ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13.
+ * That is also the default value, so no need to set it explicitly.
+ */
 #define VEC_FCW_SECAM_B			0x198
 #define VEC_SECAM_GAIN_VAL		0x19c
 
@@ -197,10 +227,15 @@ enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC_J,
 	VC4_VEC_TV_MODE_PAL,
 	VC4_VEC_TV_MODE_PAL_M,
+	VC4_VEC_TV_MODE_NTSC_443,
+	VC4_VEC_TV_MODE_PAL_60,
+	VC4_VEC_TV_MODE_PAL_N,
+	VC4_VEC_TV_MODE_SECAM,
 };
 
 struct vc4_vec_tv_mode {
 	unsigned int mode;
+	u16 expected_htotal;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -236,35 +271,68 @@ static const struct debugfs_reg32 vec_regs[] = {
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_443,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_NTSC_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC_J,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		/* PAL-60 */
+		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_PAL_M_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL_M,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_N,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_PAL_N_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	{
+		.mode = DRM_MODE_TV_MODE_SECAM,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_SECAM_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+		.custom_freq = 0x29c71c72,
+	},
 };
 
 static inline const struct vc4_vec_tv_mode *
-vc4_vec_tv_mode_lookup(unsigned int mode)
+vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
 		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
 
-		if (tv_mode->mode == mode)
+		if (tv_mode->mode == mode &&
+		    tv_mode->expected_htotal == htotal)
 			return tv_mode;
 	}
 
@@ -273,9 +341,13 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
 
 static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
 	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
 	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
 	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_60, "PAL-60", },
 	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+	{ VC4_VEC_TV_MODE_PAL_N, "PAL-N", },
+	{ VC4_VEC_TV_MODE_SECAM, "SECAM", },
 };
 
 static enum drm_connector_status
@@ -306,11 +378,16 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
 		break;
 
+	case VC4_VEC_TV_MODE_NTSC_443:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_443;
+		break;
+
 	case VC4_VEC_TV_MODE_NTSC_J:
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
 		break;
 
 	case VC4_VEC_TV_MODE_PAL:
+	case VC4_VEC_TV_MODE_PAL_60:
 		state->tv.mode = DRM_MODE_TV_MODE_PAL;
 		break;
 
@@ -318,6 +395,14 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
 		break;
 
+	case VC4_VEC_TV_MODE_PAL_N:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_N;
+		break;
+
+	case VC4_VEC_TV_MODE_SECAM:
+		state->tv.mode = DRM_MODE_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -341,6 +426,10 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_NTSC;
 		break;
 
+	case DRM_MODE_TV_MODE_NTSC_443:
+		*val = VC4_VEC_TV_MODE_NTSC_443;
+		break;
+
 	case DRM_MODE_TV_MODE_NTSC_J:
 		*val = VC4_VEC_TV_MODE_NTSC_J;
 		break;
@@ -353,6 +442,14 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_PAL_M;
 		break;
 
+	case DRM_MODE_TV_MODE_PAL_N:
+		*val = VC4_VEC_TV_MODE_PAL_N;
+		break;
+
+	case DRM_MODE_TV_MODE_SECAM:
+		*val = VC4_VEC_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -448,13 +545,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_display_mode *adjusted_mode =
+		&encoder->crtc->state->adjusted_mode;
 	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode,
+					 adjusted_mode->htotal);
 	if (!tv_mode)
 		goto err_dev_exit;
 
@@ -648,9 +748,12 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 
 	ret = drm_mode_create_tv_properties(drm,
 					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_443) |
 					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
 					    BIT(DRM_MODE_TV_MODE_PAL) |
-					    BIT(DRM_MODE_TV_MODE_PAL_M));
+					    BIT(DRM_MODE_TV_MODE_PAL_M) |
+					    BIT(DRM_MODE_TV_MODE_PAL_N) |
+					    BIT(DRM_MODE_TV_MODE_SECAM));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 25/25] drm/sun4i: tv: Convert to the new TV mode property

[Maxime Ripard]

Now that the core can deal fine with analog TV modes, let's convert the
sun4i TV driver to leverage those new features.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Convert to new get_modes helper

Changes in v5:
- Removed the count variable in get_modes
- Removed spurious vc4 change
---
 drivers/gpu/drm/sun4i/sun4i_tv.c | 141 ++++++++++-----------------------------
 1 file changed, 34 insertions(+), 107 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tv.c b/drivers/gpu/drm/sun4i/sun4i_tv.c
index c65f0a89b6b0..9625a00a48ba 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tv.c
@@ -141,23 +141,14 @@ struct resync_parameters {
 struct tv_mode {
 	char		*name;
 
+	unsigned int	tv_mode;
+
 	u32		mode;
 	u32		chroma_freq;
 	u16		back_porch;
 	u16		front_porch;
-	u16		line_number;
 	u16		vblank_level;
 
-	u32		hdisplay;
-	u16		hfront_porch;
-	u16		hsync_len;
-	u16		hback_porch;
-
-	u32		vdisplay;
-	u16		vfront_porch;
-	u16		vsync_len;
-	u16		vback_porch;
-
 	bool		yc_en;
 	bool		dac3_en;
 	bool		dac_bit25_en;
@@ -213,7 +204,7 @@ static const struct resync_parameters pal_resync_parameters = {
 
 static const struct tv_mode tv_modes[] = {
 	{
-		.name		= "NTSC",
+		.tv_mode	= DRM_MODE_TV_MODE_NTSC,
 		.mode		= SUN4I_TVE_CFG0_RES_480i,
 		.chroma_freq	= 0x21f07c1f,
 		.yc_en		= true,
@@ -222,17 +213,6 @@ static const struct tv_mode tv_modes[] = {
 
 		.back_porch	= 118,
 		.front_porch	= 32,
-		.line_number	= 525,
-
-		.hdisplay	= 720,
-		.hfront_porch	= 18,
-		.hsync_len	= 2,
-		.hback_porch	= 118,
-
-		.vdisplay	= 480,
-		.vfront_porch	= 26,
-		.vsync_len	= 2,
-		.vback_porch	= 17,
 
 		.vblank_level	= 240,
 
@@ -242,23 +222,12 @@ static const struct tv_mode tv_modes[] = {
 		.resync_params	= &ntsc_resync_parameters,
 	},
 	{
-		.name		= "PAL",
+		.tv_mode	= DRM_MODE_TV_MODE_PAL,
 		.mode		= SUN4I_TVE_CFG0_RES_576i,
 		.chroma_freq	= 0x2a098acb,
 
 		.back_porch	= 138,
 		.front_porch	= 24,
-		.line_number	= 625,
-
-		.hdisplay	= 720,
-		.hfront_porch	= 3,
-		.hsync_len	= 2,
-		.hback_porch	= 139,
-
-		.vdisplay	= 576,
-		.vfront_porch	= 28,
-		.vsync_len	= 2,
-		.vback_porch	= 19,
 
 		.vblank_level	= 252,
 
@@ -276,63 +245,21 @@ drm_encoder_to_sun4i_tv(struct drm_encoder *encoder)
 			    encoder);
 }
 
-/*
- * FIXME: If only the drm_display_mode private field was usable, this
- * could go away...
- *
- * So far, it doesn't seem to be preserved when the mode is passed by
- * to mode_set for some reason.
- */
-static const struct tv_mode *sun4i_tv_find_tv_by_mode(const struct drm_display_mode *mode)
+static const struct tv_mode *
+sun4i_tv_find_tv_by_mode(unsigned int mode)
 {
 	int i;
 
-	/* First try to identify the mode by name */
 	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
 		const struct tv_mode *tv_mode = &tv_modes[i];
 
-		DRM_DEBUG_DRIVER("Comparing mode %s vs %s",
-				 mode->name, tv_mode->name);
-
-		if (!strcmp(mode->name, tv_mode->name))
-			return tv_mode;
-	}
-
-	/* Then by number of lines */
-	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
-		const struct tv_mode *tv_mode = &tv_modes[i];
-
-		DRM_DEBUG_DRIVER("Comparing mode %s vs %s (X: %d vs %d)",
-				 mode->name, tv_mode->name,
-				 mode->vdisplay, tv_mode->vdisplay);
-
-		if (mode->vdisplay == tv_mode->vdisplay)
+		if (tv_mode->tv_mode == mode)
 			return tv_mode;
 	}
 
 	return NULL;
 }
 
-static void sun4i_tv_mode_to_drm_mode(const struct tv_mode *tv_mode,
-				      struct drm_display_mode *mode)
-{
-	DRM_DEBUG_DRIVER("Creating mode %s\n", mode->name);
-
-	mode->type = DRM_MODE_TYPE_DRIVER;
-	mode->clock = 13500;
-	mode->flags = DRM_MODE_FLAG_INTERLACE;
-
-	mode->hdisplay = tv_mode->hdisplay;
-	mode->hsync_start = mode->hdisplay + tv_mode->hfront_porch;
-	mode->hsync_end = mode->hsync_start + tv_mode->hsync_len;
-	mode->htotal = mode->hsync_end  + tv_mode->hback_porch;
-
-	mode->vdisplay = tv_mode->vdisplay;
-	mode->vsync_start = mode->vdisplay + tv_mode->vfront_porch;
-	mode->vsync_end = mode->vsync_start + tv_mode->vsync_len;
-	mode->vtotal = mode->vsync_end  + tv_mode->vback_porch;
-}
-
 static void sun4i_tv_disable(struct drm_encoder *encoder,
 			    struct drm_atomic_state *state)
 {
@@ -356,7 +283,11 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
 	struct drm_crtc_state *crtc_state =
 		drm_atomic_get_new_crtc_state(state, encoder->crtc);
 	struct drm_display_mode *mode = &crtc_state->mode;
-	const struct tv_mode *tv_mode = sun4i_tv_find_tv_by_mode(mode);
+	struct drm_connector *connector = &tv->connector;
+	struct drm_connector_state *conn_state =
+		drm_atomic_get_new_connector_state(state, connector);
+	const struct tv_mode *tv_mode =
+		sun4i_tv_find_tv_by_mode(conn_state->tv.mode);
 
 	DRM_DEBUG_DRIVER("Enabling the TV Output\n");
 
@@ -404,7 +335,7 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
 	/* Set the lines setup */
 	regmap_write(tv->regs, SUN4I_TVE_LINE_REG,
 		     SUN4I_TVE_LINE_FIRST(22) |
-		     SUN4I_TVE_LINE_NUMBER(tv_mode->line_number));
+		     SUN4I_TVE_LINE_NUMBER(mode->vtotal));
 
 	regmap_write(tv->regs, SUN4I_TVE_LEVEL_REG,
 		     SUN4I_TVE_LEVEL_BLANK(tv_mode->video_levels->blank) |
@@ -465,37 +396,21 @@ static const struct drm_encoder_helper_funcs sun4i_tv_helper_funcs = {
 	.atomic_enable	= sun4i_tv_enable,
 };
 
-static int sun4i_tv_comp_get_modes(struct drm_connector *connector)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
-		struct drm_display_mode *mode;
-		const struct tv_mode *tv_mode = &tv_modes[i];
-
-		mode = drm_mode_create(connector->dev);
-		if (!mode) {
-			DRM_ERROR("Failed to create a new display mode\n");
-			return 0;
-		}
-
-		strcpy(mode->name, tv_mode->name);
-
-		sun4i_tv_mode_to_drm_mode(tv_mode, mode);
-		drm_mode_probed_add(connector, mode);
-	}
-
-	return i;
-}
-
 static const struct drm_connector_helper_funcs sun4i_tv_comp_connector_helper_funcs = {
-	.get_modes	= sun4i_tv_comp_get_modes,
+	.atomic_check	= drm_atomic_helper_connector_tv_check,
+	.get_modes	= drm_connector_helper_tv_get_modes,
 };
 
+static void sun4i_tv_connector_reset(struct drm_connector *connector)
+{
+	drm_atomic_helper_connector_reset(connector);
+	drm_atomic_helper_connector_tv_reset(connector);
+}
+
 static const struct drm_connector_funcs sun4i_tv_comp_connector_funcs = {
 	.fill_modes		= drm_helper_probe_single_connector_modes,
 	.destroy		= drm_connector_cleanup,
-	.reset			= drm_atomic_helper_connector_reset,
+	.reset			= sun4i_tv_connector_reset,
 	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
 };
@@ -587,8 +502,20 @@ static int sun4i_tv_bind(struct device *dev, struct device *master,
 
 	drm_connector_attach_encoder(&tv->connector, &tv->encoder);
 
+	ret = drm_mode_create_tv_properties(drm,
+					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_PAL));
+	if (ret)
+		goto err_cleanup_connector;
+
+	drm_object_attach_property(&tv->connector.base,
+				   drm->mode_config.tv_mode_property,
+				   DRM_MODE_TV_MODE_NTSC);
+
 	return 0;
 
+err_cleanup_connector:
+	drm_connector_cleanup(&tv->connector);
 err_cleanup_encoder:
 	drm_encoder_cleanup(&tv->encoder);
 err_disable_clk:

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 25/25] drm/sun4i: tv: Convert to the new TV mode property

[Maxime Ripard]

Now that the core can deal fine with analog TV modes, let's convert the
sun4i TV driver to leverage those new features.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Convert to new get_modes helper

Changes in v5:
- Removed the count variable in get_modes
- Removed spurious vc4 change
---
 drivers/gpu/drm/sun4i/sun4i_tv.c | 141 ++++++++++-----------------------------
 1 file changed, 34 insertions(+), 107 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tv.c b/drivers/gpu/drm/sun4i/sun4i_tv.c
index c65f0a89b6b0..9625a00a48ba 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tv.c
@@ -141,23 +141,14 @@ struct resync_parameters {
 struct tv_mode {
 	char		*name;
 
+	unsigned int	tv_mode;
+
 	u32		mode;
 	u32		chroma_freq;
 	u16		back_porch;
 	u16		front_porch;
-	u16		line_number;
 	u16		vblank_level;
 
-	u32		hdisplay;
-	u16		hfront_porch;
-	u16		hsync_len;
-	u16		hback_porch;
-
-	u32		vdisplay;
-	u16		vfront_porch;
-	u16		vsync_len;
-	u16		vback_porch;
-
 	bool		yc_en;
 	bool		dac3_en;
 	bool		dac_bit25_en;
@@ -213,7 +204,7 @@ static const struct resync_parameters pal_resync_parameters = {
 
 static const struct tv_mode tv_modes[] = {
 	{
-		.name		= "NTSC",
+		.tv_mode	= DRM_MODE_TV_MODE_NTSC,
 		.mode		= SUN4I_TVE_CFG0_RES_480i,
 		.chroma_freq	= 0x21f07c1f,
 		.yc_en		= true,
@@ -222,17 +213,6 @@ static const struct tv_mode tv_modes[] = {
 
 		.back_porch	= 118,
 		.front_porch	= 32,
-		.line_number	= 525,
-
-		.hdisplay	= 720,
-		.hfront_porch	= 18,
-		.hsync_len	= 2,
-		.hback_porch	= 118,
-
-		.vdisplay	= 480,
-		.vfront_porch	= 26,
-		.vsync_len	= 2,
-		.vback_porch	= 17,
 
 		.vblank_level	= 240,
 
@@ -242,23 +222,12 @@ static const struct tv_mode tv_modes[] = {
 		.resync_params	= &ntsc_resync_parameters,
 	},
 	{
-		.name		= "PAL",
+		.tv_mode	= DRM_MODE_TV_MODE_PAL,
 		.mode		= SUN4I_TVE_CFG0_RES_576i,
 		.chroma_freq	= 0x2a098acb,
 
 		.back_porch	= 138,
 		.front_porch	= 24,
-		.line_number	= 625,
-
-		.hdisplay	= 720,
-		.hfront_porch	= 3,
-		.hsync_len	= 2,
-		.hback_porch	= 139,
-
-		.vdisplay	= 576,
-		.vfront_porch	= 28,
-		.vsync_len	= 2,
-		.vback_porch	= 19,
 
 		.vblank_level	= 252,
 
@@ -276,63 +245,21 @@ drm_encoder_to_sun4i_tv(struct drm_encoder *encoder)
 			    encoder);
 }
 
-/*
- * FIXME: If only the drm_display_mode private field was usable, this
- * could go away...
- *
- * So far, it doesn't seem to be preserved when the mode is passed by
- * to mode_set for some reason.
- */
-static const struct tv_mode *sun4i_tv_find_tv_by_mode(const struct drm_display_mode *mode)
+static const struct tv_mode *
+sun4i_tv_find_tv_by_mode(unsigned int mode)
 {
 	int i;
 
-	/* First try to identify the mode by name */
 	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
 		const struct tv_mode *tv_mode = &tv_modes[i];
 
-		DRM_DEBUG_DRIVER("Comparing mode %s vs %s",
-				 mode->name, tv_mode->name);
-
-		if (!strcmp(mode->name, tv_mode->name))
-			return tv_mode;
-	}
-
-	/* Then by number of lines */
-	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
-		const struct tv_mode *tv_mode = &tv_modes[i];
-
-		DRM_DEBUG_DRIVER("Comparing mode %s vs %s (X: %d vs %d)",
-				 mode->name, tv_mode->name,
-				 mode->vdisplay, tv_mode->vdisplay);
-
-		if (mode->vdisplay == tv_mode->vdisplay)
+		if (tv_mode->tv_mode == mode)
 			return tv_mode;
 	}
 
 	return NULL;
 }
 
-static void sun4i_tv_mode_to_drm_mode(const struct tv_mode *tv_mode,
-				      struct drm_display_mode *mode)
-{
-	DRM_DEBUG_DRIVER("Creating mode %s\n", mode->name);
-
-	mode->type = DRM_MODE_TYPE_DRIVER;
-	mode->clock = 13500;
-	mode->flags = DRM_MODE_FLAG_INTERLACE;
-
-	mode->hdisplay = tv_mode->hdisplay;
-	mode->hsync_start = mode->hdisplay + tv_mode->hfront_porch;
-	mode->hsync_end = mode->hsync_start + tv_mode->hsync_len;
-	mode->htotal = mode->hsync_end  + tv_mode->hback_porch;
-
-	mode->vdisplay = tv_mode->vdisplay;
-	mode->vsync_start = mode->vdisplay + tv_mode->vfront_porch;
-	mode->vsync_end = mode->vsync_start + tv_mode->vsync_len;
-	mode->vtotal = mode->vsync_end  + tv_mode->vback_porch;
-}
-
 static void sun4i_tv_disable(struct drm_encoder *encoder,
 			    struct drm_atomic_state *state)
 {
@@ -356,7 +283,11 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
 	struct drm_crtc_state *crtc_state =
 		drm_atomic_get_new_crtc_state(state, encoder->crtc);
 	struct drm_display_mode *mode = &crtc_state->mode;
-	const struct tv_mode *tv_mode = sun4i_tv_find_tv_by_mode(mode);
+	struct drm_connector *connector = &tv->connector;
+	struct drm_connector_state *conn_state =
+		drm_atomic_get_new_connector_state(state, connector);
+	const struct tv_mode *tv_mode =
+		sun4i_tv_find_tv_by_mode(conn_state->tv.mode);
 
 	DRM_DEBUG_DRIVER("Enabling the TV Output\n");
 
@@ -404,7 +335,7 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
 	/* Set the lines setup */
 	regmap_write(tv->regs, SUN4I_TVE_LINE_REG,
 		     SUN4I_TVE_LINE_FIRST(22) |
-		     SUN4I_TVE_LINE_NUMBER(tv_mode->line_number));
+		     SUN4I_TVE_LINE_NUMBER(mode->vtotal));
 
 	regmap_write(tv->regs, SUN4I_TVE_LEVEL_REG,
 		     SUN4I_TVE_LEVEL_BLANK(tv_mode->video_levels->blank) |
@@ -465,37 +396,21 @@ static const struct drm_encoder_helper_funcs sun4i_tv_helper_funcs = {
 	.atomic_enable	= sun4i_tv_enable,
 };
 
-static int sun4i_tv_comp_get_modes(struct drm_connector *connector)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
-		struct drm_display_mode *mode;
-		const struct tv_mode *tv_mode = &tv_modes[i];
-
-		mode = drm_mode_create(connector->dev);
-		if (!mode) {
-			DRM_ERROR("Failed to create a new display mode\n");
-			return 0;
-		}
-
-		strcpy(mode->name, tv_mode->name);
-
-		sun4i_tv_mode_to_drm_mode(tv_mode, mode);
-		drm_mode_probed_add(connector, mode);
-	}
-
-	return i;
-}
-
 static const struct drm_connector_helper_funcs sun4i_tv_comp_connector_helper_funcs = {
-	.get_modes	= sun4i_tv_comp_get_modes,
+	.atomic_check	= drm_atomic_helper_connector_tv_check,
+	.get_modes	= drm_connector_helper_tv_get_modes,
 };
 
+static void sun4i_tv_connector_reset(struct drm_connector *connector)
+{
+	drm_atomic_helper_connector_reset(connector);
+	drm_atomic_helper_connector_tv_reset(connector);
+}
+
 static const struct drm_connector_funcs sun4i_tv_comp_connector_funcs = {
 	.fill_modes		= drm_helper_probe_single_connector_modes,
 	.destroy		= drm_connector_cleanup,
-	.reset			= drm_atomic_helper_connector_reset,
+	.reset			= sun4i_tv_connector_reset,
 	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
 };
@@ -587,8 +502,20 @@ static int sun4i_tv_bind(struct device *dev, struct device *master,
 
 	drm_connector_attach_encoder(&tv->connector, &tv->encoder);
 
+	ret = drm_mode_create_tv_properties(drm,
+					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_PAL));
+	if (ret)
+		goto err_cleanup_connector;
+
+	drm_object_attach_property(&tv->connector.base,
+				   drm->mode_config.tv_mode_property,
+				   DRM_MODE_TV_MODE_NTSC);
+
 	return 0;
 
+err_cleanup_connector:
+	drm_connector_cleanup(&tv->connector);
 err_cleanup_encoder:
 	drm_encoder_cleanup(&tv->encoder);
 err_disable_clk:

-- 
b4 0.11.0-dev-99e3a

[Nouveau] [PATCH v9 25/25] drm/sun4i: tv: Convert to the new TV mode property

[Maxime Ripard]

Now that the core can deal fine with analog TV modes, let's convert the
sun4i TV driver to leverage those new features.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Convert to new get_modes helper

Changes in v5:
- Removed the count variable in get_modes
- Removed spurious vc4 change
---
 drivers/gpu/drm/sun4i/sun4i_tv.c | 141 ++++++++++-----------------------------
 1 file changed, 34 insertions(+), 107 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tv.c b/drivers/gpu/drm/sun4i/sun4i_tv.c
index c65f0a89b6b0..9625a00a48ba 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tv.c
@@ -141,23 +141,14 @@ struct resync_parameters {
 struct tv_mode {
 	char		*name;
 
+	unsigned int	tv_mode;
+
 	u32		mode;
 	u32		chroma_freq;
 	u16		back_porch;
 	u16		front_porch;
-	u16		line_number;
 	u16		vblank_level;
 
-	u32		hdisplay;
-	u16		hfront_porch;
-	u16		hsync_len;
-	u16		hback_porch;
-
-	u32		vdisplay;
-	u16		vfront_porch;
-	u16		vsync_len;
-	u16		vback_porch;
-
 	bool		yc_en;
 	bool		dac3_en;
 	bool		dac_bit25_en;
@@ -213,7 +204,7 @@ static const struct resync_parameters pal_resync_parameters = {
 
 static const struct tv_mode tv_modes[] = {
 	{
-		.name		= "NTSC",
+		.tv_mode	= DRM_MODE_TV_MODE_NTSC,
 		.mode		= SUN4I_TVE_CFG0_RES_480i,
 		.chroma_freq	= 0x21f07c1f,
 		.yc_en		= true,
@@ -222,17 +213,6 @@ static const struct tv_mode tv_modes[] = {
 
 		.back_porch	= 118,
 		.front_porch	= 32,
-		.line_number	= 525,
-
-		.hdisplay	= 720,
-		.hfront_porch	= 18,
-		.hsync_len	= 2,
-		.hback_porch	= 118,
-
-		.vdisplay	= 480,
-		.vfront_porch	= 26,
-		.vsync_len	= 2,
-		.vback_porch	= 17,
 
 		.vblank_level	= 240,
 
@@ -242,23 +222,12 @@ static const struct tv_mode tv_modes[] = {
 		.resync_params	= &ntsc_resync_parameters,
 	},
 	{
-		.name		= "PAL",
+		.tv_mode	= DRM_MODE_TV_MODE_PAL,
 		.mode		= SUN4I_TVE_CFG0_RES_576i,
 		.chroma_freq	= 0x2a098acb,
 
 		.back_porch	= 138,
 		.front_porch	= 24,
-		.line_number	= 625,
-
-		.hdisplay	= 720,
-		.hfront_porch	= 3,
-		.hsync_len	= 2,
-		.hback_porch	= 139,
-
-		.vdisplay	= 576,
-		.vfront_porch	= 28,
-		.vsync_len	= 2,
-		.vback_porch	= 19,
 
 		.vblank_level	= 252,
 
@@ -276,63 +245,21 @@ drm_encoder_to_sun4i_tv(struct drm_encoder *encoder)
 			    encoder);
 }
 
-/*
- * FIXME: If only the drm_display_mode private field was usable, this
- * could go away...
- *
- * So far, it doesn't seem to be preserved when the mode is passed by
- * to mode_set for some reason.
- */
-static const struct tv_mode *sun4i_tv_find_tv_by_mode(const struct drm_display_mode *mode)
+static const struct tv_mode *
+sun4i_tv_find_tv_by_mode(unsigned int mode)
 {
 	int i;
 
-	/* First try to identify the mode by name */
 	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
 		const struct tv_mode *tv_mode = &tv_modes[i];
 
-		DRM_DEBUG_DRIVER("Comparing mode %s vs %s",
-				 mode->name, tv_mode->name);
-
-		if (!strcmp(mode->name, tv_mode->name))
-			return tv_mode;
-	}
-
-	/* Then by number of lines */
-	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
-		const struct tv_mode *tv_mode = &tv_modes[i];
-
-		DRM_DEBUG_DRIVER("Comparing mode %s vs %s (X: %d vs %d)",
-				 mode->name, tv_mode->name,
-				 mode->vdisplay, tv_mode->vdisplay);
-
-		if (mode->vdisplay == tv_mode->vdisplay)
+		if (tv_mode->tv_mode == mode)
 			return tv_mode;
 	}
 
 	return NULL;
 }
 
-static void sun4i_tv_mode_to_drm_mode(const struct tv_mode *tv_mode,
-				      struct drm_display_mode *mode)
-{
-	DRM_DEBUG_DRIVER("Creating mode %s\n", mode->name);
-
-	mode->type = DRM_MODE_TYPE_DRIVER;
-	mode->clock = 13500;
-	mode->flags = DRM_MODE_FLAG_INTERLACE;
-
-	mode->hdisplay = tv_mode->hdisplay;
-	mode->hsync_start = mode->hdisplay + tv_mode->hfront_porch;
-	mode->hsync_end = mode->hsync_start + tv_mode->hsync_len;
-	mode->htotal = mode->hsync_end  + tv_mode->hback_porch;
-
-	mode->vdisplay = tv_mode->vdisplay;
-	mode->vsync_start = mode->vdisplay + tv_mode->vfront_porch;
-	mode->vsync_end = mode->vsync_start + tv_mode->vsync_len;
-	mode->vtotal = mode->vsync_end  + tv_mode->vback_porch;
-}
-
 static void sun4i_tv_disable(struct drm_encoder *encoder,
 			    struct drm_atomic_state *state)
 {
@@ -356,7 +283,11 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
 	struct drm_crtc_state *crtc_state =
 		drm_atomic_get_new_crtc_state(state, encoder->crtc);
 	struct drm_display_mode *mode = &crtc_state->mode;
-	const struct tv_mode *tv_mode = sun4i_tv_find_tv_by_mode(mode);
+	struct drm_connector *connector = &tv->connector;
+	struct drm_connector_state *conn_state =
+		drm_atomic_get_new_connector_state(state, connector);
+	const struct tv_mode *tv_mode =
+		sun4i_tv_find_tv_by_mode(conn_state->tv.mode);
 
 	DRM_DEBUG_DRIVER("Enabling the TV Output\n");
 
@@ -404,7 +335,7 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
 	/* Set the lines setup */
 	regmap_write(tv->regs, SUN4I_TVE_LINE_REG,
 		     SUN4I_TVE_LINE_FIRST(22) |
-		     SUN4I_TVE_LINE_NUMBER(tv_mode->line_number));
+		     SUN4I_TVE_LINE_NUMBER(mode->vtotal));
 
 	regmap_write(tv->regs, SUN4I_TVE_LEVEL_REG,
 		     SUN4I_TVE_LEVEL_BLANK(tv_mode->video_levels->blank) |
@@ -465,37 +396,21 @@ static const struct drm_encoder_helper_funcs sun4i_tv_helper_funcs = {
 	.atomic_enable	= sun4i_tv_enable,
 };
 
-static int sun4i_tv_comp_get_modes(struct drm_connector *connector)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
-		struct drm_display_mode *mode;
-		const struct tv_mode *tv_mode = &tv_modes[i];
-
-		mode = drm_mode_create(connector->dev);
-		if (!mode) {
-			DRM_ERROR("Failed to create a new display mode\n");
-			return 0;
-		}
-
-		strcpy(mode->name, tv_mode->name);
-
-		sun4i_tv_mode_to_drm_mode(tv_mode, mode);
-		drm_mode_probed_add(connector, mode);
-	}
-
-	return i;
-}
-
 static const struct drm_connector_helper_funcs sun4i_tv_comp_connector_helper_funcs = {
-	.get_modes	= sun4i_tv_comp_get_modes,
+	.atomic_check	= drm_atomic_helper_connector_tv_check,
+	.get_modes	= drm_connector_helper_tv_get_modes,
 };
 
+static void sun4i_tv_connector_reset(struct drm_connector *connector)
+{
+	drm_atomic_helper_connector_reset(connector);
+	drm_atomic_helper_connector_tv_reset(connector);
+}
+
 static const struct drm_connector_funcs sun4i_tv_comp_connector_funcs = {
 	.fill_modes		= drm_helper_probe_single_connector_modes,
 	.destroy		= drm_connector_cleanup,
-	.reset			= drm_atomic_helper_connector_reset,
+	.reset			= sun4i_tv_connector_reset,
 	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
 };
@@ -587,8 +502,20 @@ static int sun4i_tv_bind(struct device *dev, struct device *master,
 
 	drm_connector_attach_encoder(&tv->connector, &tv->encoder);
 
+	ret = drm_mode_create_tv_properties(drm,
+					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_PAL));
+	if (ret)
+		goto err_cleanup_connector;
+
+	drm_object_attach_property(&tv->connector.base,
+				   drm->mode_config.tv_mode_property,
+				   DRM_MODE_TV_MODE_NTSC);
+
 	return 0;
 
+err_cleanup_connector:
+	drm_connector_cleanup(&tv->connector);
 err_cleanup_encoder:
 	drm_encoder_cleanup(&tv->encoder);
 err_disable_clk:

-- 
b4 0.11.0-dev-99e3a

[Intel-gfx] [PATCH v9 25/25] drm/sun4i: tv: Convert to the new TV mode property

[Maxime Ripard]

Now that the core can deal fine with analog TV modes, let's convert the
sun4i TV driver to leverage those new features.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Convert to new get_modes helper

Changes in v5:
- Removed the count variable in get_modes
- Removed spurious vc4 change
---
 drivers/gpu/drm/sun4i/sun4i_tv.c | 141 ++++++++++-----------------------------
 1 file changed, 34 insertions(+), 107 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tv.c b/drivers/gpu/drm/sun4i/sun4i_tv.c
index c65f0a89b6b0..9625a00a48ba 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tv.c
@@ -141,23 +141,14 @@ struct resync_parameters {
 struct tv_mode {
 	char		*name;
 
+	unsigned int	tv_mode;
+
 	u32		mode;
 	u32		chroma_freq;
 	u16		back_porch;
 	u16		front_porch;
-	u16		line_number;
 	u16		vblank_level;
 
-	u32		hdisplay;
-	u16		hfront_porch;
-	u16		hsync_len;
-	u16		hback_porch;
-
-	u32		vdisplay;
-	u16		vfront_porch;
-	u16		vsync_len;
-	u16		vback_porch;
-
 	bool		yc_en;
 	bool		dac3_en;
 	bool		dac_bit25_en;
@@ -213,7 +204,7 @@ static const struct resync_parameters pal_resync_parameters = {
 
 static const struct tv_mode tv_modes[] = {
 	{
-		.name		= "NTSC",
+		.tv_mode	= DRM_MODE_TV_MODE_NTSC,
 		.mode		= SUN4I_TVE_CFG0_RES_480i,
 		.chroma_freq	= 0x21f07c1f,
 		.yc_en		= true,
@@ -222,17 +213,6 @@ static const struct tv_mode tv_modes[] = {
 
 		.back_porch	= 118,
 		.front_porch	= 32,
-		.line_number	= 525,
-
-		.hdisplay	= 720,
-		.hfront_porch	= 18,
-		.hsync_len	= 2,
-		.hback_porch	= 118,
-
-		.vdisplay	= 480,
-		.vfront_porch	= 26,
-		.vsync_len	= 2,
-		.vback_porch	= 17,
 
 		.vblank_level	= 240,
 
@@ -242,23 +222,12 @@ static const struct tv_mode tv_modes[] = {
 		.resync_params	= &ntsc_resync_parameters,
 	},
 	{
-		.name		= "PAL",
+		.tv_mode	= DRM_MODE_TV_MODE_PAL,
 		.mode		= SUN4I_TVE_CFG0_RES_576i,
 		.chroma_freq	= 0x2a098acb,
 
 		.back_porch	= 138,
 		.front_porch	= 24,
-		.line_number	= 625,
-
-		.hdisplay	= 720,
-		.hfront_porch	= 3,
-		.hsync_len	= 2,
-		.hback_porch	= 139,
-
-		.vdisplay	= 576,
-		.vfront_porch	= 28,
-		.vsync_len	= 2,
-		.vback_porch	= 19,
 
 		.vblank_level	= 252,
 
@@ -276,63 +245,21 @@ drm_encoder_to_sun4i_tv(struct drm_encoder *encoder)
 			    encoder);
 }
 
-/*
- * FIXME: If only the drm_display_mode private field was usable, this
- * could go away...
- *
- * So far, it doesn't seem to be preserved when the mode is passed by
- * to mode_set for some reason.
- */
-static const struct tv_mode *sun4i_tv_find_tv_by_mode(const struct drm_display_mode *mode)
+static const struct tv_mode *
+sun4i_tv_find_tv_by_mode(unsigned int mode)
 {
 	int i;
 
-	/* First try to identify the mode by name */
 	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
 		const struct tv_mode *tv_mode = &tv_modes[i];
 
-		DRM_DEBUG_DRIVER("Comparing mode %s vs %s",
-				 mode->name, tv_mode->name);
-
-		if (!strcmp(mode->name, tv_mode->name))
-			return tv_mode;
-	}
-
-	/* Then by number of lines */
-	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
-		const struct tv_mode *tv_mode = &tv_modes[i];
-
-		DRM_DEBUG_DRIVER("Comparing mode %s vs %s (X: %d vs %d)",
-				 mode->name, tv_mode->name,
-				 mode->vdisplay, tv_mode->vdisplay);
-
-		if (mode->vdisplay == tv_mode->vdisplay)
+		if (tv_mode->tv_mode == mode)
 			return tv_mode;
 	}
 
 	return NULL;
 }
 
-static void sun4i_tv_mode_to_drm_mode(const struct tv_mode *tv_mode,
-				      struct drm_display_mode *mode)
-{
-	DRM_DEBUG_DRIVER("Creating mode %s\n", mode->name);
-
-	mode->type = DRM_MODE_TYPE_DRIVER;
-	mode->clock = 13500;
-	mode->flags = DRM_MODE_FLAG_INTERLACE;
-
-	mode->hdisplay = tv_mode->hdisplay;
-	mode->hsync_start = mode->hdisplay + tv_mode->hfront_porch;
-	mode->hsync_end = mode->hsync_start + tv_mode->hsync_len;
-	mode->htotal = mode->hsync_end  + tv_mode->hback_porch;
-
-	mode->vdisplay = tv_mode->vdisplay;
-	mode->vsync_start = mode->vdisplay + tv_mode->vfront_porch;
-	mode->vsync_end = mode->vsync_start + tv_mode->vsync_len;
-	mode->vtotal = mode->vsync_end  + tv_mode->vback_porch;
-}
-
 static void sun4i_tv_disable(struct drm_encoder *encoder,
 			    struct drm_atomic_state *state)
 {
@@ -356,7 +283,11 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
 	struct drm_crtc_state *crtc_state =
 		drm_atomic_get_new_crtc_state(state, encoder->crtc);
 	struct drm_display_mode *mode = &crtc_state->mode;
-	const struct tv_mode *tv_mode = sun4i_tv_find_tv_by_mode(mode);
+	struct drm_connector *connector = &tv->connector;
+	struct drm_connector_state *conn_state =
+		drm_atomic_get_new_connector_state(state, connector);
+	const struct tv_mode *tv_mode =
+		sun4i_tv_find_tv_by_mode(conn_state->tv.mode);
 
 	DRM_DEBUG_DRIVER("Enabling the TV Output\n");
 
@@ -404,7 +335,7 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
 	/* Set the lines setup */
 	regmap_write(tv->regs, SUN4I_TVE_LINE_REG,
 		     SUN4I_TVE_LINE_FIRST(22) |
-		     SUN4I_TVE_LINE_NUMBER(tv_mode->line_number));
+		     SUN4I_TVE_LINE_NUMBER(mode->vtotal));
 
 	regmap_write(tv->regs, SUN4I_TVE_LEVEL_REG,
 		     SUN4I_TVE_LEVEL_BLANK(tv_mode->video_levels->blank) |
@@ -465,37 +396,21 @@ static const struct drm_encoder_helper_funcs sun4i_tv_helper_funcs = {
 	.atomic_enable	= sun4i_tv_enable,
 };
 
-static int sun4i_tv_comp_get_modes(struct drm_connector *connector)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
-		struct drm_display_mode *mode;
-		const struct tv_mode *tv_mode = &tv_modes[i];
-
-		mode = drm_mode_create(connector->dev);
-		if (!mode) {
-			DRM_ERROR("Failed to create a new display mode\n");
-			return 0;
-		}
-
-		strcpy(mode->name, tv_mode->name);
-
-		sun4i_tv_mode_to_drm_mode(tv_mode, mode);
-		drm_mode_probed_add(connector, mode);
-	}
-
-	return i;
-}
-
 static const struct drm_connector_helper_funcs sun4i_tv_comp_connector_helper_funcs = {
-	.get_modes	= sun4i_tv_comp_get_modes,
+	.atomic_check	= drm_atomic_helper_connector_tv_check,
+	.get_modes	= drm_connector_helper_tv_get_modes,
 };
 
+static void sun4i_tv_connector_reset(struct drm_connector *connector)
+{
+	drm_atomic_helper_connector_reset(connector);
+	drm_atomic_helper_connector_tv_reset(connector);
+}
+
 static const struct drm_connector_funcs sun4i_tv_comp_connector_funcs = {
 	.fill_modes		= drm_helper_probe_single_connector_modes,
 	.destroy		= drm_connector_cleanup,
-	.reset			= drm_atomic_helper_connector_reset,
+	.reset			= sun4i_tv_connector_reset,
 	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
 };
@@ -587,8 +502,20 @@ static int sun4i_tv_bind(struct device *dev, struct device *master,
 
 	drm_connector_attach_encoder(&tv->connector, &tv->encoder);
 
+	ret = drm_mode_create_tv_properties(drm,
+					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_PAL));
+	if (ret)
+		goto err_cleanup_connector;
+
+	drm_object_attach_property(&tv->connector.base,
+				   drm->mode_config.tv_mode_property,
+				   DRM_MODE_TV_MODE_NTSC);
+
 	return 0;
 
+err_cleanup_connector:
+	drm_connector_cleanup(&tv->connector);
 err_cleanup_encoder:
 	drm_encoder_cleanup(&tv->encoder);
 err_disable_clk:

-- 
b4 0.11.0-dev-99e3a

[PATCH v9 25/25] drm/sun4i: tv: Convert to the new TV mode property

[Maxime Ripard]

Now that the core can deal fine with analog TV modes, let's convert the
sun4i TV driver to leverage those new features.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Convert to new get_modes helper

Changes in v5:
- Removed the count variable in get_modes
- Removed spurious vc4 change
---
 drivers/gpu/drm/sun4i/sun4i_tv.c | 141 ++++++++++-----------------------------
 1 file changed, 34 insertions(+), 107 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tv.c b/drivers/gpu/drm/sun4i/sun4i_tv.c
index c65f0a89b6b0..9625a00a48ba 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tv.c
@@ -141,23 +141,14 @@ struct resync_parameters {
 struct tv_mode {
 	char		*name;
 
+	unsigned int	tv_mode;
+
 	u32		mode;
 	u32		chroma_freq;
 	u16		back_porch;
 	u16		front_porch;
-	u16		line_number;
 	u16		vblank_level;
 
-	u32		hdisplay;
-	u16		hfront_porch;
-	u16		hsync_len;
-	u16		hback_porch;
-
-	u32		vdisplay;
-	u16		vfront_porch;
-	u16		vsync_len;
-	u16		vback_porch;
-
 	bool		yc_en;
 	bool		dac3_en;
 	bool		dac_bit25_en;
@@ -213,7 +204,7 @@ static const struct resync_parameters pal_resync_parameters = {
 
 static const struct tv_mode tv_modes[] = {
 	{
-		.name		= "NTSC",
+		.tv_mode	= DRM_MODE_TV_MODE_NTSC,
 		.mode		= SUN4I_TVE_CFG0_RES_480i,
 		.chroma_freq	= 0x21f07c1f,
 		.yc_en		= true,
@@ -222,17 +213,6 @@ static const struct tv_mode tv_modes[] = {
 
 		.back_porch	= 118,
 		.front_porch	= 32,
-		.line_number	= 525,
-
-		.hdisplay	= 720,
-		.hfront_porch	= 18,
-		.hsync_len	= 2,
-		.hback_porch	= 118,
-
-		.vdisplay	= 480,
-		.vfront_porch	= 26,
-		.vsync_len	= 2,
-		.vback_porch	= 17,
 
 		.vblank_level	= 240,
 
@@ -242,23 +222,12 @@ static const struct tv_mode tv_modes[] = {
 		.resync_params	= &ntsc_resync_parameters,
 	},
 	{
-		.name		= "PAL",
+		.tv_mode	= DRM_MODE_TV_MODE_PAL,
 		.mode		= SUN4I_TVE_CFG0_RES_576i,
 		.chroma_freq	= 0x2a098acb,
 
 		.back_porch	= 138,
 		.front_porch	= 24,
-		.line_number	= 625,
-
-		.hdisplay	= 720,
-		.hfront_porch	= 3,
-		.hsync_len	= 2,
-		.hback_porch	= 139,
-
-		.vdisplay	= 576,
-		.vfront_porch	= 28,
-		.vsync_len	= 2,
-		.vback_porch	= 19,
 
 		.vblank_level	= 252,
 
@@ -276,63 +245,21 @@ drm_encoder_to_sun4i_tv(struct drm_encoder *encoder)
 			    encoder);
 }
 
-/*
- * FIXME: If only the drm_display_mode private field was usable, this
- * could go away...
- *
- * So far, it doesn't seem to be preserved when the mode is passed by
- * to mode_set for some reason.
- */
-static const struct tv_mode *sun4i_tv_find_tv_by_mode(const struct drm_display_mode *mode)
+static const struct tv_mode *
+sun4i_tv_find_tv_by_mode(unsigned int mode)
 {
 	int i;
 
-	/* First try to identify the mode by name */
 	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
 		const struct tv_mode *tv_mode = &tv_modes[i];
 
-		DRM_DEBUG_DRIVER("Comparing mode %s vs %s",
-				 mode->name, tv_mode->name);
-
-		if (!strcmp(mode->name, tv_mode->name))
-			return tv_mode;
-	}
-
-	/* Then by number of lines */
-	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
-		const struct tv_mode *tv_mode = &tv_modes[i];
-
-		DRM_DEBUG_DRIVER("Comparing mode %s vs %s (X: %d vs %d)",
-				 mode->name, tv_mode->name,
-				 mode->vdisplay, tv_mode->vdisplay);
-
-		if (mode->vdisplay == tv_mode->vdisplay)
+		if (tv_mode->tv_mode == mode)
 			return tv_mode;
 	}
 
 	return NULL;
 }
 
-static void sun4i_tv_mode_to_drm_mode(const struct tv_mode *tv_mode,
-				      struct drm_display_mode *mode)
-{
-	DRM_DEBUG_DRIVER("Creating mode %s\n", mode->name);
-
-	mode->type = DRM_MODE_TYPE_DRIVER;
-	mode->clock = 13500;
-	mode->flags = DRM_MODE_FLAG_INTERLACE;
-
-	mode->hdisplay = tv_mode->hdisplay;
-	mode->hsync_start = mode->hdisplay + tv_mode->hfront_porch;
-	mode->hsync_end = mode->hsync_start + tv_mode->hsync_len;
-	mode->htotal = mode->hsync_end  + tv_mode->hback_porch;
-
-	mode->vdisplay = tv_mode->vdisplay;
-	mode->vsync_start = mode->vdisplay + tv_mode->vfront_porch;
-	mode->vsync_end = mode->vsync_start + tv_mode->vsync_len;
-	mode->vtotal = mode->vsync_end  + tv_mode->vback_porch;
-}
-
 static void sun4i_tv_disable(struct drm_encoder *encoder,
 			    struct drm_atomic_state *state)
 {
@@ -356,7 +283,11 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
 	struct drm_crtc_state *crtc_state =
 		drm_atomic_get_new_crtc_state(state, encoder->crtc);
 	struct drm_display_mode *mode = &crtc_state->mode;
-	const struct tv_mode *tv_mode = sun4i_tv_find_tv_by_mode(mode);
+	struct drm_connector *connector = &tv->connector;
+	struct drm_connector_state *conn_state =
+		drm_atomic_get_new_connector_state(state, connector);
+	const struct tv_mode *tv_mode =
+		sun4i_tv_find_tv_by_mode(conn_state->tv.mode);
 
 	DRM_DEBUG_DRIVER("Enabling the TV Output\n");
 
@@ -404,7 +335,7 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
 	/* Set the lines setup */
 	regmap_write(tv->regs, SUN4I_TVE_LINE_REG,
 		     SUN4I_TVE_LINE_FIRST(22) |
-		     SUN4I_TVE_LINE_NUMBER(tv_mode->line_number));
+		     SUN4I_TVE_LINE_NUMBER(mode->vtotal));
 
 	regmap_write(tv->regs, SUN4I_TVE_LEVEL_REG,
 		     SUN4I_TVE_LEVEL_BLANK(tv_mode->video_levels->blank) |
@@ -465,37 +396,21 @@ static const struct drm_encoder_helper_funcs sun4i_tv_helper_funcs = {
 	.atomic_enable	= sun4i_tv_enable,
 };
 
-static int sun4i_tv_comp_get_modes(struct drm_connector *connector)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
-		struct drm_display_mode *mode;
-		const struct tv_mode *tv_mode = &tv_modes[i];
-
-		mode = drm_mode_create(connector->dev);
-		if (!mode) {
-			DRM_ERROR("Failed to create a new display mode\n");
-			return 0;
-		}
-
-		strcpy(mode->name, tv_mode->name);
-
-		sun4i_tv_mode_to_drm_mode(tv_mode, mode);
-		drm_mode_probed_add(connector, mode);
-	}
-
-	return i;
-}
-
 static const struct drm_connector_helper_funcs sun4i_tv_comp_connector_helper_funcs = {
-	.get_modes	= sun4i_tv_comp_get_modes,
+	.atomic_check	= drm_atomic_helper_connector_tv_check,
+	.get_modes	= drm_connector_helper_tv_get_modes,
 };
 
+static void sun4i_tv_connector_reset(struct drm_connector *connector)
+{
+	drm_atomic_helper_connector_reset(connector);
+	drm_atomic_helper_connector_tv_reset(connector);
+}
+
 static const struct drm_connector_funcs sun4i_tv_comp_connector_funcs = {
 	.fill_modes		= drm_helper_probe_single_connector_modes,
 	.destroy		= drm_connector_cleanup,
-	.reset			= drm_atomic_helper_connector_reset,
+	.reset			= sun4i_tv_connector_reset,
 	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
 };
@@ -587,8 +502,20 @@ static int sun4i_tv_bind(struct device *dev, struct device *master,
 
 	drm_connector_attach_encoder(&tv->connector, &tv->encoder);
 
+	ret = drm_mode_create_tv_properties(drm,
+					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_PAL));
+	if (ret)
+		goto err_cleanup_connector;
+
+	drm_object_attach_property(&tv->connector.base,
+				   drm->mode_config.tv_mode_property,
+				   DRM_MODE_TV_MODE_NTSC);
+
 	return 0;
 
+err_cleanup_connector:
+	drm_connector_cleanup(&tv->connector);
 err_cleanup_encoder:
 	drm_encoder_cleanup(&tv->encoder);
 err_disable_clk:

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [Nouveau] [PATCH v9 01/25] docs/fb: Document current named modes

[Noralf Trønnes]

Den 14.11.2022 14.00, skrev Maxime Ripard:
> KMS supports a number of named modes already, but it's never been
> documented anywhere, let's fix that.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> 
> ---

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>

Re: [PATCH v9 01/25] docs/fb: Document current named modes

[Noralf Trønnes]

Den 14.11.2022 14.00, skrev Maxime Ripard:
> KMS supports a number of named modes already, but it's never been
> documented anywhere, let's fix that.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> 
> ---

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>

Re: [Intel-gfx] [PATCH v9 01/25] docs/fb: Document current named modes

[Noralf Trønnes]

Den 14.11.2022 14.00, skrev Maxime Ripard:
> KMS supports a number of named modes already, but it's never been
> documented anywhere, let's fix that.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> 
> ---

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>

Re: [PATCH v9 01/25] docs/fb: Document current named modes

[Noralf Trønnes]

Den 14.11.2022 14.00, skrev Maxime Ripard:
> KMS supports a number of named modes already, but it's never been
> documented anywhere, let's fix that.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> 
> ---

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>

Re: [PATCH v9 01/25] docs/fb: Document current named modes

[Noralf Trønnes]

Den 14.11.2022 14.00, skrev Maxime Ripard:
> KMS supports a number of named modes already, but it's never been
> documented anywhere, let's fix that.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> 
> ---

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm: Analog TV Improvements (rev10)

[Patchwork]

== Series Details ==

Series: drm: Analog TV Improvements (rev10)
URL   : https://patchwork.freedesktop.org/series/107892/
State : warning

== Summary ==

Error: dim checkpatch failed
33225d7686a2 docs/fb: Document current named modes
8c65b8e4719a drm/tests: Add Kunit Helpers
-:33: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating?
#33: 
new file mode 100644

-:38: WARNING:SPDX_LICENSE_TAG: Missing or malformed SPDX-License-Identifier tag in line 1
#38: FILE: drivers/gpu/drm/tests/drm_kunit_helpers.c:1:
+#include <drm/drm_drv.h>

-:108: WARNING:SPDX_LICENSE_TAG: Missing or malformed SPDX-License-Identifier tag in line 1
#108: FILE: drivers/gpu/drm/tests/drm_kunit_helpers.h:1:
+#ifndef DRM_KUNIT_HELPERS_H_

total: 0 errors, 3 warnings, 0 checks, 80 lines checked
a3be5ddeda07 drm/connector: Rename legacy TV property
-:111: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
#111: FILE: drivers/gpu/drm/i2c/ch7006_drv.c:268:
+	drm_object_attach_property(&connector->base, conf->legacy_tv_mode_property,
 				      priv->norm);

total: 0 errors, 0 warnings, 1 checks, 164 lines checked
f6e78b240441 drm/connector: Only register TV mode property if present
d25e87b44429 drm/connector: Rename drm_mode_create_tv_properties
2d384f3cc11f drm/connector: Add TV standard property
-:79: CHECK:LINE_SPACING: Please use a blank line after function/struct/union/enum declarations
#79: FILE: drivers/gpu/drm/drm_connector.c:996:
+};
+DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)

-:335: WARNING:TYPO_SPELLING: 'Superseeded' may be misspelled - perhaps 'Superseded'?
#335: FILE: include/drm/drm_mode_config.h:720:
+	 * Superseeded by @tv_mode_property
 	   ^^^^^^^^^^^

total: 0 errors, 1 warnings, 1 checks, 291 lines checked
854c15ba16a0 drm/modes: Add a function to generate analog display modes
Traceback (most recent call last):
  File "scripts/spdxcheck.py", line 11, in <module>
    import git
ModuleNotFoundError: No module named 'git'
-:122: WARNING:LONG_LINE: line length of 119 exceeds 100 columns
#122: FILE: drivers/gpu/drm/drm_modes.c:212:
+#define TV_MODE_PARAMETER(_mode, _lines, _line_dur, _hact, _hfp, _hslen, _hbp, _hblk, _bt601_hfp, _vfp, _vslen, _vbp) \

-:137: WARNING:STATIC_CONST: Move const after static - use 'static const struct analog_parameters '
#137: FILE: drivers/gpu/drm/drm_modes.c:227:
+const static struct analog_parameters tv_modes_parameters[] = {

-:330: WARNING:TABSTOP: Statements should start on a tabstop
#330: FILE: drivers/gpu/drm/drm_modes.c:420:
+		 int porches_rem = porches - hfp_min - hbp_min;

-:377: WARNING:TYPO_SPELLING: 'asymetric' may be misspelled - perhaps 'asymmetric'?
#377: FILE: drivers/gpu/drm/drm_modes.c:467:
+		 * PAL systems also have asymetric timings between the
 		                         ^^^^^^^^^

-:378: WARNING:TYPO_SPELLING: 'symetric' may be misspelled - perhaps 'symmetric'?
#378: FILE: drivers/gpu/drm/drm_modes.c:468:
+		 * even and odd field, while NTSC is symetric.
 		                                     ^^^^^^^^

-:518: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating?
#518: 
new file mode 100644

total: 0 errors, 6 warnings, 0 checks, 651 lines checked
fc9a4d8ce45b drm/client: Add some tests for drm_connector_pick_cmdline_mode()
Traceback (most recent call last):
  File "scripts/spdxcheck.py", line 11, in <module>
    import git
ModuleNotFoundError: No module named 'git'
-:34: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating?
#34: 
new file mode 100644

-:95: CHECK:BRACES: Blank lines aren't necessary before a close brace '}'
#95: FILE: drivers/gpu/drm/tests/drm_client_modeset_test.c:57:
+
+}

-:126: CHECK:LINE_SPACING: Please don't use multiple blank lines
#126: FILE: drivers/gpu/drm/tests/drm_client_modeset_test.c:88:
+
+

total: 0 errors, 1 warnings, 2 checks, 107 lines checked
aba284fb3fe8 drm/modes: Move named modes parsing to a separate function
d0f98f4732dc drm/modes: Switch to named mode descriptors
201515db7ab8 drm/modes: Fill drm_cmdline mode from named modes
cd37dfced952 drm/connector: Add pixel clock to cmdline mode
214ea6d758e3 drm/connector: Add a function to lookup a TV mode by its name
Traceback (most recent call last):
  File "scripts/spdxcheck.py", line 11, in <module>
    import git
ModuleNotFoundError: No module named 'git'
-:68: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating?
#68: 
new file mode 100644

total: 0 errors, 1 warnings, 0 checks, 118 lines checked
75d731d5d5c0 drm/modes: Introduce the tv_mode property as a command-line option
-:190: CHECK:LINE_SPACING: Please use a blank line after function/struct/union/enum declarations
#190: FILE: drivers/gpu/drm/tests/drm_cmdline_parser_test.c:1002:
+}
+KUNIT_ARRAY_PARAM(drm_cmdline_tv_option,

total: 0 errors, 0 warnings, 1 checks, 183 lines checked
5af1ddd5a7ba drm/modes: Properly generate a drm_display_mode from a named mode
-:14: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#14: 
The heavy lifting will then be done by the drm_mode_create_from_cmdline_mode()

-:123: WARNING:FUNCTION_ARGUMENTS: function definition argument 'struct drm_device *' should also have an identifier name
#123: FILE: drivers/gpu/drm/tests/drm_client_modeset_test.c:112:
+	struct drm_display_mode *(*func)(struct drm_device *);

total: 0 errors, 2 warnings, 0 checks, 145 lines checked
276a55b9d757 drm/client: Remove match on mode name
4886256f6b12 drm/modes: Introduce more named modes
98ea566f07da drm/probe-helper: Provide a TV get_modes helper
Traceback (most recent call last):
  File "scripts/spdxcheck.py", line 11, in <module>
    import git
ModuleNotFoundError: No module named 'git'
-:70: CHECK:PREFER_KERNEL_TYPES: Prefer kernel type 'u64' over 'uint64_t'
#70: FILE: drivers/gpu/drm/drm_probe_helper.c:1187:
+		uint64_t default_mode;

-:125: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating?
#125: 
new file mode 100644

-:200: WARNING:SPACE_BEFORE_TAB: please, no space before tabs
#200: FILE: drivers/gpu/drm/tests/drm_probe_helper_test.c:71:
+#define _TV_MODE_TEST(_name, _supported, _default, _cmdline, _cmdline_mode, ...) ^I^I\$

-:207: WARNING:SPACE_BEFORE_TAB: please, no space before tabs
#207: FILE: drivers/gpu/drm/tests/drm_probe_helper_test.c:78:
+^I^I.expected_modes = (expected_mode_func_t[]) { __VA_ARGS__ }, ^I^I^I\$

-:240: ERROR:CODE_INDENT: code indent should use tabs where possible
#240: FILE: drivers/gpu/drm/tests/drm_probe_helper_test.c:111:
+^I^I ^I^I   params->default_mode);$

-:240: WARNING:SPACE_BEFORE_TAB: please, no space before tabs
#240: FILE: drivers/gpu/drm/tests/drm_probe_helper_test.c:111:
+^I^I ^I^I   params->default_mode);$

total: 1 errors, 4 warnings, 1 checks, 298 lines checked
7dc3a779f14c drm/atomic-helper: Add a TV properties reset helper
-:39: CHECK:PREFER_KERNEL_TYPES: Prefer kernel type 'u64' over 'uint64_t'
#39: FILE: drivers/gpu/drm/drm_atomic_state_helper.c:496:
+	uint64_t val;

total: 0 errors, 0 warnings, 1 checks, 88 lines checked
4dd71065ac97 drm/atomic-helper: Add an analog TV atomic_check implementation
-:11: WARNING:REPEATED_WORD: Possible repeated word: 'be'
#11: 
TV standard property have created some boilerplate that can be be shared

-:60: CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'old_conn_state->tv.margins.left != new_conn_state->tv.margins.left'
#60: FILE: drivers/gpu/drm/drm_atomic_state_helper.c:591:
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))

-:60: CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'old_conn_state->tv.margins.right != new_conn_state->tv.margins.right'
#60: FILE: drivers/gpu/drm/drm_atomic_state_helper.c:591:
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))

-:60: CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'old_conn_state->tv.margins.top != new_conn_state->tv.margins.top'
#60: FILE: drivers/gpu/drm/drm_atomic_state_helper.c:591:
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))

-:60: CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom'
#60: FILE: drivers/gpu/drm/drm_atomic_state_helper.c:591:
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))

-:60: CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'old_conn_state->tv.mode != new_conn_state->tv.mode'
#60: FILE: drivers/gpu/drm/drm_atomic_state_helper.c:591:
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))

-:60: CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'old_conn_state->tv.brightness != new_conn_state->tv.brightness'
#60: FILE: drivers/gpu/drm/drm_atomic_state_helper.c:591:
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))

-:60: CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'old_conn_state->tv.contrast != new_conn_state->tv.contrast'
#60: FILE: drivers/gpu/drm/drm_atomic_state_helper.c:591:
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))

-:60: CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction'
#60: FILE: drivers/gpu/drm/drm_atomic_state_helper.c:591:
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))

-:60: CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'old_conn_state->tv.overscan != new_conn_state->tv.overscan'
#60: FILE: drivers/gpu/drm/drm_atomic_state_helper.c:591:
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))

-:60: CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'old_conn_state->tv.saturation != new_conn_state->tv.saturation'
#60: FILE: drivers/gpu/drm/drm_atomic_state_helper.c:591:
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))

-:60: CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around 'old_conn_state->tv.hue != new_conn_state->tv.hue'
#60: FILE: drivers/gpu/drm/drm_atomic_state_helper.c:591:
+	if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left) ||
+	    (old_conn_state->tv.margins.right != new_conn_state->tv.margins.right) ||
+	    (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top) ||
+	    (old_conn_state->tv.margins.bottom != new_conn_state->tv.margins.bottom) ||
+	    (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+	    (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+	    (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+	    (old_conn_state->tv.flicker_reduction != new_conn_state->tv.flicker_reduction) ||
+	    (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+	    (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+	    (old_conn_state->tv.hue != new_conn_state->tv.hue))

total: 0 errors, 1 warnings, 11 checks, 70 lines checked
93bf8a59d0a4 drm/vc4: vec: Use TV Reset implementation
d7a50c3601fd drm/vc4: vec: Check for VEC output constraints
337c7d4641a0 drm/vc4: vec: Convert to the new TV mode property
3da84187042b drm/vc4: vec: Add support for more analog TV standards
032c31f8673a drm/sun4i: tv: Convert to the new TV mode property

[Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm: Analog TV Improvements (rev10)

[Patchwork]

== Series Details ==

Series: drm: Analog TV Improvements (rev10)
URL   : https://patchwork.freedesktop.org/series/107892/
State : warning

== Summary ==

Error: dim sparse failed
Sparse version: v0.6.2
Fast mode used, each commit won't be checked separately.

[Intel-gfx] ✗ Fi.CI.BAT: failure for drm: Analog TV Improvements (rev10)

[Patchwork]

[-- Attachment #1: Type: text/plain, Size: 7897 bytes --]

== Series Details ==

Series: drm: Analog TV Improvements (rev10)
URL   : https://patchwork.freedesktop.org/series/107892/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_12378 -> Patchwork_107892v10
====================================================

Summary
-------

  **FAILURE**

  Serious unknown changes coming with Patchwork_107892v10 absolutely need to be
  verified manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in Patchwork_107892v10, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_107892v10/index.html

Participating hosts (39 -> 39)
------------------------------

  Additional (1): bat-rpls-2 
  Missing    (1): fi-bdw-samus 

Possible new issues
-------------------

  Here are the unknown changes that may have been introduced in Patchwork_107892v10:

### IGT changes ###

#### Possible regressions ####

  * igt@i915_selftest@live@workarounds:
    - fi-rkl-guc:         [PASS][1] -> [INCOMPLETE][2]
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12378/fi-rkl-guc/igt@i915_selftest@live@workarounds.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_107892v10/fi-rkl-guc/igt@i915_selftest@live@workarounds.html

  
Known issues
------------

  Here are the changes found in Patchwork_107892v10 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@gem_exec_suspend@basic-s3@smem:
    - fi-rkl-11600:       NOTRUN -> [INCOMPLETE][3] ([i915#6179])
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_107892v10/fi-rkl-11600/igt@gem_exec_suspend@basic-s3@smem.html

  * igt@i915_selftest@live@gt_engines:
    - bat-dg1-6:          [PASS][4] -> [INCOMPLETE][5] ([i915#4418])
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12378/bat-dg1-6/igt@i915_selftest@live@gt_engines.html
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_107892v10/bat-dg1-6/igt@i915_selftest@live@gt_engines.html

  * igt@runner@aborted:
    - fi-apl-guc:         NOTRUN -> [FAIL][6] ([i915#4312])
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_107892v10/fi-apl-guc/igt@runner@aborted.html
    - bat-dg1-6:          NOTRUN -> [FAIL][7] ([i915#4312])
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_107892v10/bat-dg1-6/igt@runner@aborted.html

  
#### Possible fixes ####

  * igt@gem_huc_copy@huc-copy:
    - {bat-dg2-8}:        [FAIL][8] ([i915#7029]) -> [PASS][9]
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12378/bat-dg2-8/igt@gem_huc_copy@huc-copy.html
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_107892v10/bat-dg2-8/igt@gem_huc_copy@huc-copy.html

  * igt@i915_selftest@live@gt_heartbeat:
    - fi-bxt-dsi:         [DMESG-FAIL][10] ([i915#5334]) -> [PASS][11]
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12378/fi-bxt-dsi/igt@i915_selftest@live@gt_heartbeat.html
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_107892v10/fi-bxt-dsi/igt@i915_selftest@live@gt_heartbeat.html

  * igt@kms_cursor_legacy@basic-busy-flip-before-cursor@atomic-transitions:
    - fi-bsw-kefka:       [FAIL][12] ([i915#6298]) -> [PASS][13]
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12378/fi-bsw-kefka/igt@kms_cursor_legacy@basic-busy-flip-before-cursor@atomic-transitions.html
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_107892v10/fi-bsw-kefka/igt@kms_cursor_legacy@basic-busy-flip-before-cursor@atomic-transitions.html

  
#### Warnings ####

  * igt@i915_suspend@basic-s3-without-i915:
    - fi-rkl-11600:       [INCOMPLETE][14] ([i915#4817]) -> [FAIL][15] ([fdo#103375])
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12378/fi-rkl-11600/igt@i915_suspend@basic-s3-without-i915.html
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_107892v10/fi-rkl-11600/igt@i915_suspend@basic-s3-without-i915.html

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
  [fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
  [fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
  [fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
  [i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
  [i915#1155]: https://gitlab.freedesktop.org/drm/intel/issues/1155
  [i915#2867]: https://gitlab.freedesktop.org/drm/intel/issues/2867
  [i915#3282]: https://gitlab.freedesktop.org/drm/intel/issues/3282
  [i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
  [i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
  [i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
  [i915#4258]: https://gitlab.freedesktop.org/drm/intel/issues/4258
  [i915#4312]: https://gitlab.freedesktop.org/drm/intel/issues/4312
  [i915#4418]: https://gitlab.freedesktop.org/drm/intel/issues/4418
  [i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
  [i915#4817]: https://gitlab.freedesktop.org/drm/intel/issues/4817
  [i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
  [i915#5334]: https://gitlab.freedesktop.org/drm/intel/issues/5334
  [i915#6179]: https://gitlab.freedesktop.org/drm/intel/issues/6179
  [i915#6298]: https://gitlab.freedesktop.org/drm/intel/issues/6298
  [i915#6621]: https://gitlab.freedesktop.org/drm/intel/issues/6621
  [i915#7029]: https://gitlab.freedesktop.org/drm/intel/issues/7029
  [i915#7346]: https://gitlab.freedesktop.org/drm/intel/issues/7346
  [i915#7456]: https://gitlab.freedesktop.org/drm/intel/issues/7456


Build changes
-------------

  * Linux: CI_DRM_12378 -> Patchwork_107892v10

  CI-20190529: 20190529
  CI_DRM_12378: adf57aa9c15f55b7c544ff211e9e9f6a6f37ac10 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_7056: 05096a6754048f4b5a2de798ab4bea32012b556a @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
  Patchwork_107892v10: adf57aa9c15f55b7c544ff211e9e9f6a6f37ac10 @ git://anongit.freedesktop.org/gfx-ci/linux


### Linux commits

da2c1eec70a7 drm/sun4i: tv: Convert to the new TV mode property
47d0321de3ff drm/vc4: vec: Add support for more analog TV standards
bebb2dbf86ff drm/vc4: vec: Convert to the new TV mode property
20769a588dd4 drm/vc4: vec: Check for VEC output constraints
d3b0bfeeee65 drm/vc4: vec: Use TV Reset implementation
9de2d027edc7 drm/atomic-helper: Add an analog TV atomic_check implementation
eb50e9d01366 drm/atomic-helper: Add a TV properties reset helper
2162dcfdaf44 drm/probe-helper: Provide a TV get_modes helper
d122d140b07c drm/modes: Introduce more named modes
687a833c25bd drm/client: Remove match on mode name
3c9bc1177a0f drm/modes: Properly generate a drm_display_mode from a named mode
92e2544882c9 drm/modes: Introduce the tv_mode property as a command-line option
f0100bc83e31 drm/connector: Add a function to lookup a TV mode by its name
49bbf5a8615b drm/connector: Add pixel clock to cmdline mode
8a6c510f7c52 drm/modes: Fill drm_cmdline mode from named modes
32e1e701ab0c drm/modes: Switch to named mode descriptors
afcbce8baadd drm/modes: Move named modes parsing to a separate function
cd4cf164a207 drm/client: Add some tests for drm_connector_pick_cmdline_mode()
7eb01099d1e2 drm/modes: Add a function to generate analog display modes
edb0845ce89c drm/connector: Add TV standard property
45d8ace1a381 drm/connector: Rename drm_mode_create_tv_properties
5a8f15a63c78 drm/connector: Only register TV mode property if present
3e7088a391c6 drm/connector: Rename legacy TV property
dcb82a29d636 drm/tests: Add Kunit Helpers
38a11c272910 docs/fb: Document current named modes

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_107892v10/index.html

[-- Attachment #2: Type: text/html, Size: 7864 bytes --]

Re: (subset) [PATCH v9 01/25] docs/fb: Document current named modes

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:20 +0100, Maxime Ripard wrote:
> KMS supports a number of named modes already, but it's never been
> documented anywhere, let's fix that.
> 
> 

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Nouveau] (subset) [PATCH v9 01/25] docs/fb: Document current named modes

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:20 +0100, Maxime Ripard wrote:
> KMS supports a number of named modes already, but it's never been
> documented anywhere, let's fix that.
> 
> 

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 01/25] docs/fb: Document current named modes

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:20 +0100, Maxime Ripard wrote:
> KMS supports a number of named modes already, but it's never been
> documented anywhere, let's fix that.
> 
> 

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Intel-gfx] (subset) [PATCH v9 01/25] docs/fb: Document current named modes

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:20 +0100, Maxime Ripard wrote:
> KMS supports a number of named modes already, but it's never been
> documented anywhere, let's fix that.
> 
> 

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 01/25] docs/fb: Document current named modes

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:20 +0100, Maxime Ripard wrote:
> KMS supports a number of named modes already, but it's never been
> documented anywhere, let's fix that.
> 
> 

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH v9 02/25] drm/tests: Add Kunit Helpers

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:21 +0100, Maxime Ripard wrote:
> As the number of kunit tests in KMS grows further, we start to have
> multiple test suites that, for example, need to register a mock DRM
> driver to interact with the KMS function they are supposed to test.
> 
> Let's add a file meant to provide those kind of helpers to avoid
> duplication.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Nouveau] (subset) [PATCH v9 02/25] drm/tests: Add Kunit Helpers

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:21 +0100, Maxime Ripard wrote:
> As the number of kunit tests in KMS grows further, we start to have
> multiple test suites that, for example, need to register a mock DRM
> driver to interact with the KMS function they are supposed to test.
> 
> Let's add a file meant to provide those kind of helpers to avoid
> duplication.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 02/25] drm/tests: Add Kunit Helpers

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:21 +0100, Maxime Ripard wrote:
> As the number of kunit tests in KMS grows further, we start to have
> multiple test suites that, for example, need to register a mock DRM
> driver to interact with the KMS function they are supposed to test.
> 
> Let's add a file meant to provide those kind of helpers to avoid
> duplication.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Intel-gfx] (subset) [PATCH v9 02/25] drm/tests: Add Kunit Helpers

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:21 +0100, Maxime Ripard wrote:
> As the number of kunit tests in KMS grows further, we start to have
> multiple test suites that, for example, need to register a mock DRM
> driver to interact with the KMS function they are supposed to test.
> 
> Let's add a file meant to provide those kind of helpers to avoid
> duplication.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 02/25] drm/tests: Add Kunit Helpers

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:21 +0100, Maxime Ripard wrote:
> As the number of kunit tests in KMS grows further, we start to have
> multiple test suites that, for example, need to register a mock DRM
> driver to interact with the KMS function they are supposed to test.
> 
> Let's add a file meant to provide those kind of helpers to avoid
> duplication.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH v9 08/25] drm/client: Add some tests for drm_connector_pick_cmdline_mode()

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:27 +0100, Maxime Ripard wrote:
> drm_connector_pick_cmdline_mode() is in charge of finding a proper
> drm_display_mode from the definition we got in the video= command line
> argument.
> 
> Let's add some unit tests to make sure we're not getting any regressions
> there.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Nouveau] (subset) [PATCH v9 08/25] drm/client: Add some tests for drm_connector_pick_cmdline_mode()

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:27 +0100, Maxime Ripard wrote:
> drm_connector_pick_cmdline_mode() is in charge of finding a proper
> drm_display_mode from the definition we got in the video= command line
> argument.
> 
> Let's add some unit tests to make sure we're not getting any regressions
> there.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 08/25] drm/client: Add some tests for drm_connector_pick_cmdline_mode()

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:27 +0100, Maxime Ripard wrote:
> drm_connector_pick_cmdline_mode() is in charge of finding a proper
> drm_display_mode from the definition we got in the video= command line
> argument.
> 
> Let's add some unit tests to make sure we're not getting any regressions
> there.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Intel-gfx] (subset) [PATCH v9 08/25] drm/client: Add some tests for drm_connector_pick_cmdline_mode()

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:27 +0100, Maxime Ripard wrote:
> drm_connector_pick_cmdline_mode() is in charge of finding a proper
> drm_display_mode from the definition we got in the video= command line
> argument.
> 
> Let's add some unit tests to make sure we're not getting any regressions
> there.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 08/25] drm/client: Add some tests for drm_connector_pick_cmdline_mode()

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:27 +0100, Maxime Ripard wrote:
> drm_connector_pick_cmdline_mode() is in charge of finding a proper
> drm_display_mode from the definition we got in the video= command line
> argument.
> 
> Let's add some unit tests to make sure we're not getting any regressions
> there.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:28 +0100, Maxime Ripard wrote:
> The current construction of the named mode parsing doesn't allow to extend
> it easily. Let's move it to a separate function so we can add more
> parameters and modes.
> 
> In order for the tests to still pass, some extra checks are needed, so
> it's not a 1:1 move.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Nouveau] (subset) [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:28 +0100, Maxime Ripard wrote:
> The current construction of the named mode parsing doesn't allow to extend
> it easily. Let's move it to a separate function so we can add more
> parameters and modes.
> 
> In order for the tests to still pass, some extra checks are needed, so
> it's not a 1:1 move.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:28 +0100, Maxime Ripard wrote:
> The current construction of the named mode parsing doesn't allow to extend
> it easily. Let's move it to a separate function so we can add more
> parameters and modes.
> 
> In order for the tests to still pass, some extra checks are needed, so
> it's not a 1:1 move.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Intel-gfx] (subset) [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:28 +0100, Maxime Ripard wrote:
> The current construction of the named mode parsing doesn't allow to extend
> it easily. Let's move it to a separate function so we can add more
> parameters and modes.
> 
> In order for the tests to still pass, some extra checks are needed, so
> it's not a 1:1 move.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:28 +0100, Maxime Ripard wrote:
> The current construction of the named mode parsing doesn't allow to extend
> it easily. Let's move it to a separate function so we can add more
> parameters and modes.
> 
> In order for the tests to still pass, some extra checks are needed, so
> it's not a 1:1 move.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH v9 10/25] drm/modes: Switch to named mode descriptors

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:29 +0100, Maxime Ripard wrote:
> The current named mode parsing relies only on the mode name, and doesn't
> allow to specify any other parameter.
> 
> Let's convert that string list to an array of a custom structure that will
> hold the name and some additional parameters in the future.
> 
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Nouveau] (subset) [PATCH v9 10/25] drm/modes: Switch to named mode descriptors

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:29 +0100, Maxime Ripard wrote:
> The current named mode parsing relies only on the mode name, and doesn't
> allow to specify any other parameter.
> 
> Let's convert that string list to an array of a custom structure that will
> hold the name and some additional parameters in the future.
> 
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 10/25] drm/modes: Switch to named mode descriptors

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:29 +0100, Maxime Ripard wrote:
> The current named mode parsing relies only on the mode name, and doesn't
> allow to specify any other parameter.
> 
> Let's convert that string list to an array of a custom structure that will
> hold the name and some additional parameters in the future.
> 
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Intel-gfx] (subset) [PATCH v9 10/25] drm/modes: Switch to named mode descriptors

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:29 +0100, Maxime Ripard wrote:
> The current named mode parsing relies only on the mode name, and doesn't
> allow to specify any other parameter.
> 
> Let's convert that string list to an array of a custom structure that will
> hold the name and some additional parameters in the future.
> 
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 10/25] drm/modes: Switch to named mode descriptors

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:29 +0100, Maxime Ripard wrote:
> The current named mode parsing relies only on the mode name, and doesn't
> allow to specify any other parameter.
> 
> Let's convert that string list to an array of a custom structure that will
> hold the name and some additional parameters in the future.
> 
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH v9 11/25] drm/modes: Fill drm_cmdline mode from named modes

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:30 +0100, Maxime Ripard wrote:
> The current code to deal with named modes will only set the mode name, and
> then it's up to drivers to try to match that name to whatever mode or
> configuration they see fit.
> 
> The plan is to remove that need and move the named mode handling out of
> drivers and into the core, and only rely on modes and properties. Let's
> start by properly filling drm_cmdline_mode from a named mode.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Nouveau] (subset) [PATCH v9 11/25] drm/modes: Fill drm_cmdline mode from named modes

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:30 +0100, Maxime Ripard wrote:
> The current code to deal with named modes will only set the mode name, and
> then it's up to drivers to try to match that name to whatever mode or
> configuration they see fit.
> 
> The plan is to remove that need and move the named mode handling out of
> drivers and into the core, and only rely on modes and properties. Let's
> start by properly filling drm_cmdline_mode from a named mode.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 11/25] drm/modes: Fill drm_cmdline mode from named modes

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:30 +0100, Maxime Ripard wrote:
> The current code to deal with named modes will only set the mode name, and
> then it's up to drivers to try to match that name to whatever mode or
> configuration they see fit.
> 
> The plan is to remove that need and move the named mode handling out of
> drivers and into the core, and only rely on modes and properties. Let's
> start by properly filling drm_cmdline_mode from a named mode.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Intel-gfx] (subset) [PATCH v9 11/25] drm/modes: Fill drm_cmdline mode from named modes

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:30 +0100, Maxime Ripard wrote:
> The current code to deal with named modes will only set the mode name, and
> then it's up to drivers to try to match that name to whatever mode or
> configuration they see fit.
> 
> The plan is to remove that need and move the named mode handling out of
> drivers and into the core, and only rely on modes and properties. Let's
> start by properly filling drm_cmdline_mode from a named mode.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 11/25] drm/modes: Fill drm_cmdline mode from named modes

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:30 +0100, Maxime Ripard wrote:
> The current code to deal with named modes will only set the mode name, and
> then it's up to drivers to try to match that name to whatever mode or
> configuration they see fit.
> 
> The plan is to remove that need and move the named mode handling out of
> drivers and into the core, and only rely on modes and properties. Let's
> start by properly filling drm_cmdline_mode from a named mode.
> 
> [...]

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH v9 12/25] drm/connector: Add pixel clock to cmdline mode

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:31 +0100, Maxime Ripard wrote:
> We'll need to get the pixel clock to generate proper display modes for
> all the current named modes. Let's add it to struct drm_cmdline_mode and
> fill it when parsing the named mode.
> 
> 

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Nouveau] (subset) [PATCH v9 12/25] drm/connector: Add pixel clock to cmdline mode

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:31 +0100, Maxime Ripard wrote:
> We'll need to get the pixel clock to generate proper display modes for
> all the current named modes. Let's add it to struct drm_cmdline_mode and
> fill it when parsing the named mode.
> 
> 

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 12/25] drm/connector: Add pixel clock to cmdline mode

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:31 +0100, Maxime Ripard wrote:
> We'll need to get the pixel clock to generate proper display modes for
> all the current named modes. Let's add it to struct drm_cmdline_mode and
> fill it when parsing the named mode.
> 
> 

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: [Intel-gfx] (subset) [PATCH v9 12/25] drm/connector: Add pixel clock to cmdline mode

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:31 +0100, Maxime Ripard wrote:
> We'll need to get the pixel clock to generate proper display modes for
> all the current named modes. Let's add it to struct drm_cmdline_mode and
> fill it when parsing the named mode.
> 
> 

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

Re: (subset) [PATCH v9 12/25] drm/connector: Add pixel clock to cmdline mode

[Maxime Ripard]

On Mon, 14 Nov 2022 14:00:31 +0100, Maxime Ripard wrote:
> We'll need to get the pixel clock to generate proper display modes for
> all the current named modes. Let's add it to struct drm_cmdline_mode and
> fill it when parsing the named mode.
> 
> 

Applied to drm/drm-misc (drm-misc-next).

Thanks!
Maxime

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

Hi Maxime

On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
>
> The current construction of the named mode parsing doesn't allow to extend
> it easily. Let's move it to a separate function so we can add more
> parameters and modes.
>
> In order for the tests to still pass, some extra checks are needed, so
> it's not a 1:1 move.
>
> Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
>
> ---
> Changes in v7:
> - Add Noralf Reviewed-by
>
> Changes in v6:
> - Simplify the test for connection status extras
> - Simplify the code path to call drm_mode_parse_cmdline_named_mode
>
> Changes in v4:
> - Fold down all the named mode patches that were split into a single
>   patch again to maintain bisectability
> ---
>  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 58 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> index 71c050c3ee6b..37542612912b 100644
> --- a/drivers/gpu/drm/drm_modes.c
> +++ b/drivers/gpu/drm/drm_modes.c
> @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
>         "PAL",
>  };
>
> +static int drm_mode_parse_cmdline_named_mode(const char *name,
> +                                            unsigned int name_end,
> +                                            struct drm_cmdline_mode *cmdline_mode)
> +{
> +       unsigned int i;
> +
> +       if (!name_end)
> +               return 0;
> +
> +       /* If the name starts with a digit, it's not a named mode */
> +       if (isdigit(name[0]))
> +               return 0;
> +
> +       /*
> +        * If there's an equal sign in the name, the command-line
> +        * contains only an option and no mode.
> +        */
> +       if (strnchr(name, name_end, '='))
> +               return 0;
> +
> +       /* The connection status extras can be set without a mode. */
> +       if (name_end == 1 &&
> +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> +               return 0;
> +
> +       /*
> +        * We're sure we're a named mode at this point, iterate over the
> +        * list of modes we're aware of.
> +        */
> +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> +               int ret;
> +
> +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> +               if (ret != name_end)
> +                       continue;
> +
> +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> +               cmdline_mode->specified = true;
> +
> +               return 1;
> +       }
> +
> +       return -EINVAL;
> +}
> +
>  /**
>   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
>   * @mode_option: optional per connector mode option
> @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
>         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
>         const char *options_ptr = NULL;
>         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> -       int i, len, ret;
> +       int len, ret;
>
>         memset(mode, 0, sizeof(*mode));
>         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
>                 parse_extras = true;
>         }
>
> -       /* First check for a named mode */
> -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> -               if (ret == mode_end) {
> -                       if (refresh_ptr)
> -                               return false; /* named + refresh is invalid */
> +       if (!mode_end)
> +               return false;

I'm chasing down a change in behaviour between 6.1 and 6.6, and this
patch seems to be at least part of the cause.

Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
memory. All good.

It used to be possible to use "video=HDMI-A-1:-32" on the kernel
command line to set it back to 32bpp.

After this patch that is no longer possible. "mode_end = bpp_off", and
"bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
being 0. That fails this conditional.
drm_mode_parse_cmdline_named_mode already aborts early but with no
error if name_end / mode_end is 0, so this "if" clause seems
redundant, and is a change in behaviour.

We do then get a second parsing failure due to the check if (bpp_ptr
|| refresh_ptr) at [2].
Prior to this patch my video= line would get mode->specified set via
"if (ret == mode_end)" removed above, as ret = mode_end = 0. We
therefore didn't evaluate the conditional that now fails.

So I guess my question is whether my command line is valid or not, and
therefore is this a regression?
If considered invalid, then presumably there is no way to update the
bpp without also having to specify the resolution. That is rather
annoying as almost everything else can be updated without having to
set the resolution, so this one property would be the odd one out.

Thanks, and Happy New Year.
  Dave

[1] https://github.com/torvalds/linux/commit/f741b28fb299263d2d03a0fb701bfe648927cd47
[2] https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_modes.c#L2441
[3] https://github.com/torvalds/linux/commit/a631bf30eb914affc0a574f44576833477346ad6

>
> -                       strcpy(mode->name, drm_named_modes_whitelist[i]);
> -                       mode->specified = true;
> -                       break;
> -               }
> -       }
> +       ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode);
> +       if (ret < 0)
> +               return false;
> +
> +       /*
> +        * Having a mode that starts by a letter (and thus is named) and
> +        * an at-sign (used to specify a refresh rate) is disallowed.
> +        */
> +       if (ret && refresh_ptr)
> +               return false;
>
>         /* No named mode? Check for a normal mode argument, e.g. 1024x768 */
>         if (!mode->specified && isdigit(name[0])) {
>
> --
> b4 0.11.0-dev-99e3a

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

Hi Maxime

On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
>
> The current construction of the named mode parsing doesn't allow to extend
> it easily. Let's move it to a separate function so we can add more
> parameters and modes.
>
> In order for the tests to still pass, some extra checks are needed, so
> it's not a 1:1 move.
>
> Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
>
> ---
> Changes in v7:
> - Add Noralf Reviewed-by
>
> Changes in v6:
> - Simplify the test for connection status extras
> - Simplify the code path to call drm_mode_parse_cmdline_named_mode
>
> Changes in v4:
> - Fold down all the named mode patches that were split into a single
>   patch again to maintain bisectability
> ---
>  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 58 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> index 71c050c3ee6b..37542612912b 100644
> --- a/drivers/gpu/drm/drm_modes.c
> +++ b/drivers/gpu/drm/drm_modes.c
> @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
>         "PAL",
>  };
>
> +static int drm_mode_parse_cmdline_named_mode(const char *name,
> +                                            unsigned int name_end,
> +                                            struct drm_cmdline_mode *cmdline_mode)
> +{
> +       unsigned int i;
> +
> +       if (!name_end)
> +               return 0;
> +
> +       /* If the name starts with a digit, it's not a named mode */
> +       if (isdigit(name[0]))
> +               return 0;
> +
> +       /*
> +        * If there's an equal sign in the name, the command-line
> +        * contains only an option and no mode.
> +        */
> +       if (strnchr(name, name_end, '='))
> +               return 0;
> +
> +       /* The connection status extras can be set without a mode. */
> +       if (name_end == 1 &&
> +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> +               return 0;
> +
> +       /*
> +        * We're sure we're a named mode at this point, iterate over the
> +        * list of modes we're aware of.
> +        */
> +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> +               int ret;
> +
> +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> +               if (ret != name_end)
> +                       continue;
> +
> +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> +               cmdline_mode->specified = true;
> +
> +               return 1;
> +       }
> +
> +       return -EINVAL;
> +}
> +
>  /**
>   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
>   * @mode_option: optional per connector mode option
> @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
>         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
>         const char *options_ptr = NULL;
>         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> -       int i, len, ret;
> +       int len, ret;
>
>         memset(mode, 0, sizeof(*mode));
>         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
>                 parse_extras = true;
>         }
>
> -       /* First check for a named mode */
> -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> -               if (ret == mode_end) {
> -                       if (refresh_ptr)
> -                               return false; /* named + refresh is invalid */
> +       if (!mode_end)
> +               return false;

I'm chasing down a change in behaviour between 6.1 and 6.6, and this
patch seems to be at least part of the cause.

Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
memory. All good.

It used to be possible to use "video=HDMI-A-1:-32" on the kernel
command line to set it back to 32bpp.

After this patch that is no longer possible. "mode_end = bpp_off", and
"bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
being 0. That fails this conditional.
drm_mode_parse_cmdline_named_mode already aborts early but with no
error if name_end / mode_end is 0, so this "if" clause seems
redundant, and is a change in behaviour.

We do then get a second parsing failure due to the check if (bpp_ptr
|| refresh_ptr) at [2].
Prior to this patch my video= line would get mode->specified set via
"if (ret == mode_end)" removed above, as ret = mode_end = 0. We
therefore didn't evaluate the conditional that now fails.

So I guess my question is whether my command line is valid or not, and
therefore is this a regression?
If considered invalid, then presumably there is no way to update the
bpp without also having to specify the resolution. That is rather
annoying as almost everything else can be updated without having to
set the resolution, so this one property would be the odd one out.

Thanks, and Happy New Year.
  Dave

[1] https://github.com/torvalds/linux/commit/f741b28fb299263d2d03a0fb701bfe648927cd47
[2] https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_modes.c#L2441
[3] https://github.com/torvalds/linux/commit/a631bf30eb914affc0a574f44576833477346ad6

>
> -                       strcpy(mode->name, drm_named_modes_whitelist[i]);
> -                       mode->specified = true;
> -                       break;
> -               }
> -       }
> +       ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode);
> +       if (ret < 0)
> +               return false;
> +
> +       /*
> +        * Having a mode that starts by a letter (and thus is named) and
> +        * an at-sign (used to specify a refresh rate) is disallowed.
> +        */
> +       if (ret && refresh_ptr)
> +               return false;
>
>         /* No named mode? Check for a normal mode argument, e.g. 1024x768 */
>         if (!mode->specified && isdigit(name[0])) {
>
> --
> b4 0.11.0-dev-99e3a

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

Hi Maxime

On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
>
> The current construction of the named mode parsing doesn't allow to extend
> it easily. Let's move it to a separate function so we can add more
> parameters and modes.
>
> In order for the tests to still pass, some extra checks are needed, so
> it's not a 1:1 move.
>
> Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
>
> ---
> Changes in v7:
> - Add Noralf Reviewed-by
>
> Changes in v6:
> - Simplify the test for connection status extras
> - Simplify the code path to call drm_mode_parse_cmdline_named_mode
>
> Changes in v4:
> - Fold down all the named mode patches that were split into a single
>   patch again to maintain bisectability
> ---
>  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 58 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> index 71c050c3ee6b..37542612912b 100644
> --- a/drivers/gpu/drm/drm_modes.c
> +++ b/drivers/gpu/drm/drm_modes.c
> @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
>         "PAL",
>  };
>
> +static int drm_mode_parse_cmdline_named_mode(const char *name,
> +                                            unsigned int name_end,
> +                                            struct drm_cmdline_mode *cmdline_mode)
> +{
> +       unsigned int i;
> +
> +       if (!name_end)
> +               return 0;
> +
> +       /* If the name starts with a digit, it's not a named mode */
> +       if (isdigit(name[0]))
> +               return 0;
> +
> +       /*
> +        * If there's an equal sign in the name, the command-line
> +        * contains only an option and no mode.
> +        */
> +       if (strnchr(name, name_end, '='))
> +               return 0;
> +
> +       /* The connection status extras can be set without a mode. */
> +       if (name_end == 1 &&
> +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> +               return 0;
> +
> +       /*
> +        * We're sure we're a named mode at this point, iterate over the
> +        * list of modes we're aware of.
> +        */
> +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> +               int ret;
> +
> +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> +               if (ret != name_end)
> +                       continue;
> +
> +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> +               cmdline_mode->specified = true;
> +
> +               return 1;
> +       }
> +
> +       return -EINVAL;
> +}
> +
>  /**
>   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
>   * @mode_option: optional per connector mode option
> @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
>         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
>         const char *options_ptr = NULL;
>         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> -       int i, len, ret;
> +       int len, ret;
>
>         memset(mode, 0, sizeof(*mode));
>         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
>                 parse_extras = true;
>         }
>
> -       /* First check for a named mode */
> -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> -               if (ret == mode_end) {
> -                       if (refresh_ptr)
> -                               return false; /* named + refresh is invalid */
> +       if (!mode_end)
> +               return false;

I'm chasing down a change in behaviour between 6.1 and 6.6, and this
patch seems to be at least part of the cause.

Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
memory. All good.

It used to be possible to use "video=HDMI-A-1:-32" on the kernel
command line to set it back to 32bpp.

After this patch that is no longer possible. "mode_end = bpp_off", and
"bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
being 0. That fails this conditional.
drm_mode_parse_cmdline_named_mode already aborts early but with no
error if name_end / mode_end is 0, so this "if" clause seems
redundant, and is a change in behaviour.

We do then get a second parsing failure due to the check if (bpp_ptr
|| refresh_ptr) at [2].
Prior to this patch my video= line would get mode->specified set via
"if (ret == mode_end)" removed above, as ret = mode_end = 0. We
therefore didn't evaluate the conditional that now fails.

So I guess my question is whether my command line is valid or not, and
therefore is this a regression?
If considered invalid, then presumably there is no way to update the
bpp without also having to specify the resolution. That is rather
annoying as almost everything else can be updated without having to
set the resolution, so this one property would be the odd one out.

Thanks, and Happy New Year.
  Dave

[1] https://github.com/torvalds/linux/commit/f741b28fb299263d2d03a0fb701bfe648927cd47
[2] https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_modes.c#L2441
[3] https://github.com/torvalds/linux/commit/a631bf30eb914affc0a574f44576833477346ad6

>
> -                       strcpy(mode->name, drm_named_modes_whitelist[i]);
> -                       mode->specified = true;
> -                       break;
> -               }
> -       }
> +       ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode);
> +       if (ret < 0)
> +               return false;
> +
> +       /*
> +        * Having a mode that starts by a letter (and thus is named) and
> +        * an at-sign (used to specify a refresh rate) is disallowed.
> +        */
> +       if (ret && refresh_ptr)
> +               return false;
>
>         /* No named mode? Check for a normal mode argument, e.g. 1024x768 */
>         if (!mode->specified && isdigit(name[0])) {
>
> --
> b4 0.11.0-dev-99e3a

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

Hi Maxime

On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
>
> The current construction of the named mode parsing doesn't allow to extend
> it easily. Let's move it to a separate function so we can add more
> parameters and modes.
>
> In order for the tests to still pass, some extra checks are needed, so
> it's not a 1:1 move.
>
> Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
>
> ---
> Changes in v7:
> - Add Noralf Reviewed-by
>
> Changes in v6:
> - Simplify the test for connection status extras
> - Simplify the code path to call drm_mode_parse_cmdline_named_mode
>
> Changes in v4:
> - Fold down all the named mode patches that were split into a single
>   patch again to maintain bisectability
> ---
>  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 58 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> index 71c050c3ee6b..37542612912b 100644
> --- a/drivers/gpu/drm/drm_modes.c
> +++ b/drivers/gpu/drm/drm_modes.c
> @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
>         "PAL",
>  };
>
> +static int drm_mode_parse_cmdline_named_mode(const char *name,
> +                                            unsigned int name_end,
> +                                            struct drm_cmdline_mode *cmdline_mode)
> +{
> +       unsigned int i;
> +
> +       if (!name_end)
> +               return 0;
> +
> +       /* If the name starts with a digit, it's not a named mode */
> +       if (isdigit(name[0]))
> +               return 0;
> +
> +       /*
> +        * If there's an equal sign in the name, the command-line
> +        * contains only an option and no mode.
> +        */
> +       if (strnchr(name, name_end, '='))
> +               return 0;
> +
> +       /* The connection status extras can be set without a mode. */
> +       if (name_end == 1 &&
> +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> +               return 0;
> +
> +       /*
> +        * We're sure we're a named mode at this point, iterate over the
> +        * list of modes we're aware of.
> +        */
> +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> +               int ret;
> +
> +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> +               if (ret != name_end)
> +                       continue;
> +
> +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> +               cmdline_mode->specified = true;
> +
> +               return 1;
> +       }
> +
> +       return -EINVAL;
> +}
> +
>  /**
>   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
>   * @mode_option: optional per connector mode option
> @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
>         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
>         const char *options_ptr = NULL;
>         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> -       int i, len, ret;
> +       int len, ret;
>
>         memset(mode, 0, sizeof(*mode));
>         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
>                 parse_extras = true;
>         }
>
> -       /* First check for a named mode */
> -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> -               if (ret == mode_end) {
> -                       if (refresh_ptr)
> -                               return false; /* named + refresh is invalid */
> +       if (!mode_end)
> +               return false;

I'm chasing down a change in behaviour between 6.1 and 6.6, and this
patch seems to be at least part of the cause.

Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
memory. All good.

It used to be possible to use "video=HDMI-A-1:-32" on the kernel
command line to set it back to 32bpp.

After this patch that is no longer possible. "mode_end = bpp_off", and
"bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
being 0. That fails this conditional.
drm_mode_parse_cmdline_named_mode already aborts early but with no
error if name_end / mode_end is 0, so this "if" clause seems
redundant, and is a change in behaviour.

We do then get a second parsing failure due to the check if (bpp_ptr
|| refresh_ptr) at [2].
Prior to this patch my video= line would get mode->specified set via
"if (ret == mode_end)" removed above, as ret = mode_end = 0. We
therefore didn't evaluate the conditional that now fails.

So I guess my question is whether my command line is valid or not, and
therefore is this a regression?
If considered invalid, then presumably there is no way to update the
bpp without also having to specify the resolution. That is rather
annoying as almost everything else can be updated without having to
set the resolution, so this one property would be the odd one out.

Thanks, and Happy New Year.
  Dave

[1] https://github.com/torvalds/linux/commit/f741b28fb299263d2d03a0fb701bfe648927cd47
[2] https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_modes.c#L2441
[3] https://github.com/torvalds/linux/commit/a631bf30eb914affc0a574f44576833477346ad6

>
> -                       strcpy(mode->name, drm_named_modes_whitelist[i]);
> -                       mode->specified = true;
> -                       break;
> -               }
> -       }
> +       ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode);
> +       if (ret < 0)
> +               return false;
> +
> +       /*
> +        * Having a mode that starts by a letter (and thus is named) and
> +        * an at-sign (used to specify a refresh rate) is disallowed.
> +        */
> +       if (ret && refresh_ptr)
> +               return false;
>
>         /* No named mode? Check for a normal mode argument, e.g. 1024x768 */
>         if (!mode->specified && isdigit(name[0])) {
>
> --
> b4 0.11.0-dev-99e3a

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

Hi Maxime

On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
>
> The current construction of the named mode parsing doesn't allow to extend
> it easily. Let's move it to a separate function so we can add more
> parameters and modes.
>
> In order for the tests to still pass, some extra checks are needed, so
> it's not a 1:1 move.
>
> Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
>
> ---
> Changes in v7:
> - Add Noralf Reviewed-by
>
> Changes in v6:
> - Simplify the test for connection status extras
> - Simplify the code path to call drm_mode_parse_cmdline_named_mode
>
> Changes in v4:
> - Fold down all the named mode patches that were split into a single
>   patch again to maintain bisectability
> ---
>  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 58 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> index 71c050c3ee6b..37542612912b 100644
> --- a/drivers/gpu/drm/drm_modes.c
> +++ b/drivers/gpu/drm/drm_modes.c
> @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
>         "PAL",
>  };
>
> +static int drm_mode_parse_cmdline_named_mode(const char *name,
> +                                            unsigned int name_end,
> +                                            struct drm_cmdline_mode *cmdline_mode)
> +{
> +       unsigned int i;
> +
> +       if (!name_end)
> +               return 0;
> +
> +       /* If the name starts with a digit, it's not a named mode */
> +       if (isdigit(name[0]))
> +               return 0;
> +
> +       /*
> +        * If there's an equal sign in the name, the command-line
> +        * contains only an option and no mode.
> +        */
> +       if (strnchr(name, name_end, '='))
> +               return 0;
> +
> +       /* The connection status extras can be set without a mode. */
> +       if (name_end == 1 &&
> +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> +               return 0;
> +
> +       /*
> +        * We're sure we're a named mode at this point, iterate over the
> +        * list of modes we're aware of.
> +        */
> +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> +               int ret;
> +
> +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> +               if (ret != name_end)
> +                       continue;
> +
> +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> +               cmdline_mode->specified = true;
> +
> +               return 1;
> +       }
> +
> +       return -EINVAL;
> +}
> +
>  /**
>   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
>   * @mode_option: optional per connector mode option
> @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
>         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
>         const char *options_ptr = NULL;
>         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> -       int i, len, ret;
> +       int len, ret;
>
>         memset(mode, 0, sizeof(*mode));
>         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
>                 parse_extras = true;
>         }
>
> -       /* First check for a named mode */
> -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> -               if (ret == mode_end) {
> -                       if (refresh_ptr)
> -                               return false; /* named + refresh is invalid */
> +       if (!mode_end)
> +               return false;

I'm chasing down a change in behaviour between 6.1 and 6.6, and this
patch seems to be at least part of the cause.

Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
memory. All good.

It used to be possible to use "video=HDMI-A-1:-32" on the kernel
command line to set it back to 32bpp.

After this patch that is no longer possible. "mode_end = bpp_off", and
"bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
being 0. That fails this conditional.
drm_mode_parse_cmdline_named_mode already aborts early but with no
error if name_end / mode_end is 0, so this "if" clause seems
redundant, and is a change in behaviour.

We do then get a second parsing failure due to the check if (bpp_ptr
|| refresh_ptr) at [2].
Prior to this patch my video= line would get mode->specified set via
"if (ret == mode_end)" removed above, as ret = mode_end = 0. We
therefore didn't evaluate the conditional that now fails.

So I guess my question is whether my command line is valid or not, and
therefore is this a regression?
If considered invalid, then presumably there is no way to update the
bpp without also having to specify the resolution. That is rather
annoying as almost everything else can be updated without having to
set the resolution, so this one property would be the odd one out.

Thanks, and Happy New Year.
  Dave

[1] https://github.com/torvalds/linux/commit/f741b28fb299263d2d03a0fb701bfe648927cd47
[2] https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_modes.c#L2441
[3] https://github.com/torvalds/linux/commit/a631bf30eb914affc0a574f44576833477346ad6

>
> -                       strcpy(mode->name, drm_named_modes_whitelist[i]);
> -                       mode->specified = true;
> -                       break;
> -               }
> -       }
> +       ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode);
> +       if (ret < 0)
> +               return false;
> +
> +       /*
> +        * Having a mode that starts by a letter (and thus is named) and
> +        * an at-sign (used to specify a refresh rate) is disallowed.
> +        */
> +       if (ret && refresh_ptr)
> +               return false;
>
>         /* No named mode? Check for a normal mode argument, e.g. 1024x768 */
>         if (!mode->specified && isdigit(name[0])) {
>
> --
> b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 6024 bytes --]

Hi Dave,

Happy new year :)

On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> Hi Maxime
> 
> On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > The current construction of the named mode parsing doesn't allow to extend
> > it easily. Let's move it to a separate function so we can add more
> > parameters and modes.
> >
> > In order for the tests to still pass, some extra checks are needed, so
> > it's not a 1:1 move.
> >
> > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> >
> > ---
> > Changes in v7:
> > - Add Noralf Reviewed-by
> >
> > Changes in v6:
> > - Simplify the test for connection status extras
> > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> >
> > Changes in v4:
> > - Fold down all the named mode patches that were split into a single
> >   patch again to maintain bisectability
> > ---
> >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> >  1 file changed, 58 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > index 71c050c3ee6b..37542612912b 100644
> > --- a/drivers/gpu/drm/drm_modes.c
> > +++ b/drivers/gpu/drm/drm_modes.c
> > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> >         "PAL",
> >  };
> >
> > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > +                                            unsigned int name_end,
> > +                                            struct drm_cmdline_mode *cmdline_mode)
> > +{
> > +       unsigned int i;
> > +
> > +       if (!name_end)
> > +               return 0;
> > +
> > +       /* If the name starts with a digit, it's not a named mode */
> > +       if (isdigit(name[0]))
> > +               return 0;
> > +
> > +       /*
> > +        * If there's an equal sign in the name, the command-line
> > +        * contains only an option and no mode.
> > +        */
> > +       if (strnchr(name, name_end, '='))
> > +               return 0;
> > +
> > +       /* The connection status extras can be set without a mode. */
> > +       if (name_end == 1 &&
> > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > +               return 0;
> > +
> > +       /*
> > +        * We're sure we're a named mode at this point, iterate over the
> > +        * list of modes we're aware of.
> > +        */
> > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > +               int ret;
> > +
> > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > +               if (ret != name_end)
> > +                       continue;
> > +
> > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > +               cmdline_mode->specified = true;
> > +
> > +               return 1;
> > +       }
> > +
> > +       return -EINVAL;
> > +}
> > +
> >  /**
> >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> >   * @mode_option: optional per connector mode option
> > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> >         const char *options_ptr = NULL;
> >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > -       int i, len, ret;
> > +       int len, ret;
> >
> >         memset(mode, 0, sizeof(*mode));
> >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> >                 parse_extras = true;
> >         }
> >
> > -       /* First check for a named mode */
> > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > -               if (ret == mode_end) {
> > -                       if (refresh_ptr)
> > -                               return false; /* named + refresh is invalid */
> > +       if (!mode_end)
> > +               return false;
> 
> I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> patch seems to be at least part of the cause.
> 
> Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> memory. All good.
> 
> It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> command line to set it back to 32bpp.
> 
> After this patch that is no longer possible. "mode_end = bpp_off", and
> "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> being 0. That fails this conditional.
> drm_mode_parse_cmdline_named_mode already aborts early but with no
> error if name_end / mode_end is 0, so this "if" clause seems
> redundant, and is a change in behaviour.
> 
> We do then get a second parsing failure due to the check if (bpp_ptr
> || refresh_ptr) at [2].
> Prior to this patch my video= line would get mode->specified set via
> "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> therefore didn't evaluate the conditional that now fails.
> 
> So I guess my question is whether my command line is valid or not, and
> therefore is this a regression?

It's a mess :)

Documentation/fb/modedb.rst defines the video parameter syntax as:

<xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]

And thus mandates the x and y resolution. I guess that's what I use as a
base, and thus -bpp alone would be invalid.

But then it contradicts itself some time later by documenting that
video=HDMI-1:D is ok.

I guess what you experienced was just an oversight: it was not
documented anywhere that it was valid, so we didn't really tested it
either. We should add a unit test for it and fix it.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

[-- Attachment #1.1: Type: text/plain, Size: 6024 bytes --]

Hi Dave,

Happy new year :)

On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> Hi Maxime
> 
> On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > The current construction of the named mode parsing doesn't allow to extend
> > it easily. Let's move it to a separate function so we can add more
> > parameters and modes.
> >
> > In order for the tests to still pass, some extra checks are needed, so
> > it's not a 1:1 move.
> >
> > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> >
> > ---
> > Changes in v7:
> > - Add Noralf Reviewed-by
> >
> > Changes in v6:
> > - Simplify the test for connection status extras
> > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> >
> > Changes in v4:
> > - Fold down all the named mode patches that were split into a single
> >   patch again to maintain bisectability
> > ---
> >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> >  1 file changed, 58 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > index 71c050c3ee6b..37542612912b 100644
> > --- a/drivers/gpu/drm/drm_modes.c
> > +++ b/drivers/gpu/drm/drm_modes.c
> > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> >         "PAL",
> >  };
> >
> > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > +                                            unsigned int name_end,
> > +                                            struct drm_cmdline_mode *cmdline_mode)
> > +{
> > +       unsigned int i;
> > +
> > +       if (!name_end)
> > +               return 0;
> > +
> > +       /* If the name starts with a digit, it's not a named mode */
> > +       if (isdigit(name[0]))
> > +               return 0;
> > +
> > +       /*
> > +        * If there's an equal sign in the name, the command-line
> > +        * contains only an option and no mode.
> > +        */
> > +       if (strnchr(name, name_end, '='))
> > +               return 0;
> > +
> > +       /* The connection status extras can be set without a mode. */
> > +       if (name_end == 1 &&
> > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > +               return 0;
> > +
> > +       /*
> > +        * We're sure we're a named mode at this point, iterate over the
> > +        * list of modes we're aware of.
> > +        */
> > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > +               int ret;
> > +
> > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > +               if (ret != name_end)
> > +                       continue;
> > +
> > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > +               cmdline_mode->specified = true;
> > +
> > +               return 1;
> > +       }
> > +
> > +       return -EINVAL;
> > +}
> > +
> >  /**
> >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> >   * @mode_option: optional per connector mode option
> > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> >         const char *options_ptr = NULL;
> >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > -       int i, len, ret;
> > +       int len, ret;
> >
> >         memset(mode, 0, sizeof(*mode));
> >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> >                 parse_extras = true;
> >         }
> >
> > -       /* First check for a named mode */
> > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > -               if (ret == mode_end) {
> > -                       if (refresh_ptr)
> > -                               return false; /* named + refresh is invalid */
> > +       if (!mode_end)
> > +               return false;
> 
> I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> patch seems to be at least part of the cause.
> 
> Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> memory. All good.
> 
> It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> command line to set it back to 32bpp.
> 
> After this patch that is no longer possible. "mode_end = bpp_off", and
> "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> being 0. That fails this conditional.
> drm_mode_parse_cmdline_named_mode already aborts early but with no
> error if name_end / mode_end is 0, so this "if" clause seems
> redundant, and is a change in behaviour.
> 
> We do then get a second parsing failure due to the check if (bpp_ptr
> || refresh_ptr) at [2].
> Prior to this patch my video= line would get mode->specified set via
> "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> therefore didn't evaluate the conditional that now fails.
> 
> So I guess my question is whether my command line is valid or not, and
> therefore is this a regression?

It's a mess :)

Documentation/fb/modedb.rst defines the video parameter syntax as:

<xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]

And thus mandates the x and y resolution. I guess that's what I use as a
base, and thus -bpp alone would be invalid.

But then it contradicts itself some time later by documenting that
video=HDMI-1:D is ok.

I guess what you experienced was just an oversight: it was not
documented anywhere that it was valid, so we didn't really tested it
either. We should add a unit test for it and fix it.

Maxime

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 6024 bytes --]

Hi Dave,

Happy new year :)

On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> Hi Maxime
> 
> On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > The current construction of the named mode parsing doesn't allow to extend
> > it easily. Let's move it to a separate function so we can add more
> > parameters and modes.
> >
> > In order for the tests to still pass, some extra checks are needed, so
> > it's not a 1:1 move.
> >
> > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> >
> > ---
> > Changes in v7:
> > - Add Noralf Reviewed-by
> >
> > Changes in v6:
> > - Simplify the test for connection status extras
> > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> >
> > Changes in v4:
> > - Fold down all the named mode patches that were split into a single
> >   patch again to maintain bisectability
> > ---
> >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> >  1 file changed, 58 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > index 71c050c3ee6b..37542612912b 100644
> > --- a/drivers/gpu/drm/drm_modes.c
> > +++ b/drivers/gpu/drm/drm_modes.c
> > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> >         "PAL",
> >  };
> >
> > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > +                                            unsigned int name_end,
> > +                                            struct drm_cmdline_mode *cmdline_mode)
> > +{
> > +       unsigned int i;
> > +
> > +       if (!name_end)
> > +               return 0;
> > +
> > +       /* If the name starts with a digit, it's not a named mode */
> > +       if (isdigit(name[0]))
> > +               return 0;
> > +
> > +       /*
> > +        * If there's an equal sign in the name, the command-line
> > +        * contains only an option and no mode.
> > +        */
> > +       if (strnchr(name, name_end, '='))
> > +               return 0;
> > +
> > +       /* The connection status extras can be set without a mode. */
> > +       if (name_end == 1 &&
> > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > +               return 0;
> > +
> > +       /*
> > +        * We're sure we're a named mode at this point, iterate over the
> > +        * list of modes we're aware of.
> > +        */
> > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > +               int ret;
> > +
> > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > +               if (ret != name_end)
> > +                       continue;
> > +
> > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > +               cmdline_mode->specified = true;
> > +
> > +               return 1;
> > +       }
> > +
> > +       return -EINVAL;
> > +}
> > +
> >  /**
> >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> >   * @mode_option: optional per connector mode option
> > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> >         const char *options_ptr = NULL;
> >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > -       int i, len, ret;
> > +       int len, ret;
> >
> >         memset(mode, 0, sizeof(*mode));
> >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> >                 parse_extras = true;
> >         }
> >
> > -       /* First check for a named mode */
> > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > -               if (ret == mode_end) {
> > -                       if (refresh_ptr)
> > -                               return false; /* named + refresh is invalid */
> > +       if (!mode_end)
> > +               return false;
> 
> I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> patch seems to be at least part of the cause.
> 
> Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> memory. All good.
> 
> It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> command line to set it back to 32bpp.
> 
> After this patch that is no longer possible. "mode_end = bpp_off", and
> "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> being 0. That fails this conditional.
> drm_mode_parse_cmdline_named_mode already aborts early but with no
> error if name_end / mode_end is 0, so this "if" clause seems
> redundant, and is a change in behaviour.
> 
> We do then get a second parsing failure due to the check if (bpp_ptr
> || refresh_ptr) at [2].
> Prior to this patch my video= line would get mode->specified set via
> "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> therefore didn't evaluate the conditional that now fails.
> 
> So I guess my question is whether my command line is valid or not, and
> therefore is this a regression?

It's a mess :)

Documentation/fb/modedb.rst defines the video parameter syntax as:

<xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]

And thus mandates the x and y resolution. I guess that's what I use as a
base, and thus -bpp alone would be invalid.

But then it contradicts itself some time later by documenting that
video=HDMI-1:D is ok.

I guess what you experienced was just an oversight: it was not
documented anywhere that it was valid, so we didn't really tested it
either. We should add a unit test for it and fix it.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 6024 bytes --]

Hi Dave,

Happy new year :)

On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> Hi Maxime
> 
> On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > The current construction of the named mode parsing doesn't allow to extend
> > it easily. Let's move it to a separate function so we can add more
> > parameters and modes.
> >
> > In order for the tests to still pass, some extra checks are needed, so
> > it's not a 1:1 move.
> >
> > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> >
> > ---
> > Changes in v7:
> > - Add Noralf Reviewed-by
> >
> > Changes in v6:
> > - Simplify the test for connection status extras
> > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> >
> > Changes in v4:
> > - Fold down all the named mode patches that were split into a single
> >   patch again to maintain bisectability
> > ---
> >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> >  1 file changed, 58 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > index 71c050c3ee6b..37542612912b 100644
> > --- a/drivers/gpu/drm/drm_modes.c
> > +++ b/drivers/gpu/drm/drm_modes.c
> > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> >         "PAL",
> >  };
> >
> > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > +                                            unsigned int name_end,
> > +                                            struct drm_cmdline_mode *cmdline_mode)
> > +{
> > +       unsigned int i;
> > +
> > +       if (!name_end)
> > +               return 0;
> > +
> > +       /* If the name starts with a digit, it's not a named mode */
> > +       if (isdigit(name[0]))
> > +               return 0;
> > +
> > +       /*
> > +        * If there's an equal sign in the name, the command-line
> > +        * contains only an option and no mode.
> > +        */
> > +       if (strnchr(name, name_end, '='))
> > +               return 0;
> > +
> > +       /* The connection status extras can be set without a mode. */
> > +       if (name_end == 1 &&
> > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > +               return 0;
> > +
> > +       /*
> > +        * We're sure we're a named mode at this point, iterate over the
> > +        * list of modes we're aware of.
> > +        */
> > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > +               int ret;
> > +
> > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > +               if (ret != name_end)
> > +                       continue;
> > +
> > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > +               cmdline_mode->specified = true;
> > +
> > +               return 1;
> > +       }
> > +
> > +       return -EINVAL;
> > +}
> > +
> >  /**
> >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> >   * @mode_option: optional per connector mode option
> > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> >         const char *options_ptr = NULL;
> >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > -       int i, len, ret;
> > +       int len, ret;
> >
> >         memset(mode, 0, sizeof(*mode));
> >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> >                 parse_extras = true;
> >         }
> >
> > -       /* First check for a named mode */
> > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > -               if (ret == mode_end) {
> > -                       if (refresh_ptr)
> > -                               return false; /* named + refresh is invalid */
> > +       if (!mode_end)
> > +               return false;
> 
> I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> patch seems to be at least part of the cause.
> 
> Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> memory. All good.
> 
> It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> command line to set it back to 32bpp.
> 
> After this patch that is no longer possible. "mode_end = bpp_off", and
> "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> being 0. That fails this conditional.
> drm_mode_parse_cmdline_named_mode already aborts early but with no
> error if name_end / mode_end is 0, so this "if" clause seems
> redundant, and is a change in behaviour.
> 
> We do then get a second parsing failure due to the check if (bpp_ptr
> || refresh_ptr) at [2].
> Prior to this patch my video= line would get mode->specified set via
> "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> therefore didn't evaluate the conditional that now fails.
> 
> So I guess my question is whether my command line is valid or not, and
> therefore is this a regression?

It's a mess :)

Documentation/fb/modedb.rst defines the video parameter syntax as:

<xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]

And thus mandates the x and y resolution. I guess that's what I use as a
base, and thus -bpp alone would be invalid.

But then it contradicts itself some time later by documenting that
video=HDMI-1:D is ok.

I guess what you experienced was just an oversight: it was not
documented anywhere that it was valid, so we didn't really tested it
either. We should add a unit test for it and fix it.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 6024 bytes --]

Hi Dave,

Happy new year :)

On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> Hi Maxime
> 
> On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > The current construction of the named mode parsing doesn't allow to extend
> > it easily. Let's move it to a separate function so we can add more
> > parameters and modes.
> >
> > In order for the tests to still pass, some extra checks are needed, so
> > it's not a 1:1 move.
> >
> > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> >
> > ---
> > Changes in v7:
> > - Add Noralf Reviewed-by
> >
> > Changes in v6:
> > - Simplify the test for connection status extras
> > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> >
> > Changes in v4:
> > - Fold down all the named mode patches that were split into a single
> >   patch again to maintain bisectability
> > ---
> >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> >  1 file changed, 58 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > index 71c050c3ee6b..37542612912b 100644
> > --- a/drivers/gpu/drm/drm_modes.c
> > +++ b/drivers/gpu/drm/drm_modes.c
> > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> >         "PAL",
> >  };
> >
> > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > +                                            unsigned int name_end,
> > +                                            struct drm_cmdline_mode *cmdline_mode)
> > +{
> > +       unsigned int i;
> > +
> > +       if (!name_end)
> > +               return 0;
> > +
> > +       /* If the name starts with a digit, it's not a named mode */
> > +       if (isdigit(name[0]))
> > +               return 0;
> > +
> > +       /*
> > +        * If there's an equal sign in the name, the command-line
> > +        * contains only an option and no mode.
> > +        */
> > +       if (strnchr(name, name_end, '='))
> > +               return 0;
> > +
> > +       /* The connection status extras can be set without a mode. */
> > +       if (name_end == 1 &&
> > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > +               return 0;
> > +
> > +       /*
> > +        * We're sure we're a named mode at this point, iterate over the
> > +        * list of modes we're aware of.
> > +        */
> > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > +               int ret;
> > +
> > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > +               if (ret != name_end)
> > +                       continue;
> > +
> > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > +               cmdline_mode->specified = true;
> > +
> > +               return 1;
> > +       }
> > +
> > +       return -EINVAL;
> > +}
> > +
> >  /**
> >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> >   * @mode_option: optional per connector mode option
> > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> >         const char *options_ptr = NULL;
> >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > -       int i, len, ret;
> > +       int len, ret;
> >
> >         memset(mode, 0, sizeof(*mode));
> >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> >                 parse_extras = true;
> >         }
> >
> > -       /* First check for a named mode */
> > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > -               if (ret == mode_end) {
> > -                       if (refresh_ptr)
> > -                               return false; /* named + refresh is invalid */
> > +       if (!mode_end)
> > +               return false;
> 
> I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> patch seems to be at least part of the cause.
> 
> Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> memory. All good.
> 
> It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> command line to set it back to 32bpp.
> 
> After this patch that is no longer possible. "mode_end = bpp_off", and
> "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> being 0. That fails this conditional.
> drm_mode_parse_cmdline_named_mode already aborts early but with no
> error if name_end / mode_end is 0, so this "if" clause seems
> redundant, and is a change in behaviour.
> 
> We do then get a second parsing failure due to the check if (bpp_ptr
> || refresh_ptr) at [2].
> Prior to this patch my video= line would get mode->specified set via
> "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> therefore didn't evaluate the conditional that now fails.
> 
> So I guess my question is whether my command line is valid or not, and
> therefore is this a regression?

It's a mess :)

Documentation/fb/modedb.rst defines the video parameter syntax as:

<xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]

And thus mandates the x and y resolution. I guess that's what I use as a
base, and thus -bpp alone would be invalid.

But then it contradicts itself some time later by documenting that
video=HDMI-1:D is ok.

I guess what you experienced was just an oversight: it was not
documented anywhere that it was valid, so we didn't really tested it
either. We should add a unit test for it and fix it.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

Hi Maxime

On Wed, 3 Jan 2024 at 13:33, Maxime Ripard <maxime@cerno.tech> wrote:
>
> Hi Dave,
>
> Happy new year :)

And to you.

> On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> > Hi Maxime
> >
> > On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> > >
> > > The current construction of the named mode parsing doesn't allow to extend
> > > it easily. Let's move it to a separate function so we can add more
> > > parameters and modes.
> > >
> > > In order for the tests to still pass, some extra checks are needed, so
> > > it's not a 1:1 move.
> > >
> > > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > >
> > > ---
> > > Changes in v7:
> > > - Add Noralf Reviewed-by
> > >
> > > Changes in v6:
> > > - Simplify the test for connection status extras
> > > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> > >
> > > Changes in v4:
> > > - Fold down all the named mode patches that were split into a single
> > >   patch again to maintain bisectability
> > > ---
> > >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> > >  1 file changed, 58 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > index 71c050c3ee6b..37542612912b 100644
> > > --- a/drivers/gpu/drm/drm_modes.c
> > > +++ b/drivers/gpu/drm/drm_modes.c
> > > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> > >         "PAL",
> > >  };
> > >
> > > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > > +                                            unsigned int name_end,
> > > +                                            struct drm_cmdline_mode *cmdline_mode)
> > > +{
> > > +       unsigned int i;
> > > +
> > > +       if (!name_end)
> > > +               return 0;
> > > +
> > > +       /* If the name starts with a digit, it's not a named mode */
> > > +       if (isdigit(name[0]))
> > > +               return 0;
> > > +
> > > +       /*
> > > +        * If there's an equal sign in the name, the command-line
> > > +        * contains only an option and no mode.
> > > +        */
> > > +       if (strnchr(name, name_end, '='))
> > > +               return 0;
> > > +
> > > +       /* The connection status extras can be set without a mode. */
> > > +       if (name_end == 1 &&
> > > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > > +               return 0;
> > > +
> > > +       /*
> > > +        * We're sure we're a named mode at this point, iterate over the
> > > +        * list of modes we're aware of.
> > > +        */
> > > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > +               int ret;
> > > +
> > > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > +               if (ret != name_end)
> > > +                       continue;
> > > +
> > > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > > +               cmdline_mode->specified = true;
> > > +
> > > +               return 1;
> > > +       }
> > > +
> > > +       return -EINVAL;
> > > +}
> > > +
> > >  /**
> > >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> > >   * @mode_option: optional per connector mode option
> > > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> > >         const char *options_ptr = NULL;
> > >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > > -       int i, len, ret;
> > > +       int len, ret;
> > >
> > >         memset(mode, 0, sizeof(*mode));
> > >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > >                 parse_extras = true;
> > >         }
> > >
> > > -       /* First check for a named mode */
> > > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > -               if (ret == mode_end) {
> > > -                       if (refresh_ptr)
> > > -                               return false; /* named + refresh is invalid */
> > > +       if (!mode_end)
> > > +               return false;
> >
> > I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> > patch seems to be at least part of the cause.
> >
> > Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> > memory. All good.
> >
> > It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> > command line to set it back to 32bpp.
> >
> > After this patch that is no longer possible. "mode_end = bpp_off", and
> > "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> > being 0. That fails this conditional.
> > drm_mode_parse_cmdline_named_mode already aborts early but with no
> > error if name_end / mode_end is 0, so this "if" clause seems
> > redundant, and is a change in behaviour.
> >
> > We do then get a second parsing failure due to the check if (bpp_ptr
> > || refresh_ptr) at [2].
> > Prior to this patch my video= line would get mode->specified set via
> > "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> > therefore didn't evaluate the conditional that now fails.
> >
> > So I guess my question is whether my command line is valid or not, and
> > therefore is this a regression?
>
> It's a mess :)
>
> Documentation/fb/modedb.rst defines the video parameter syntax as:
>
> <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
>
> And thus mandates the x and y resolution. I guess that's what I use as a
> base, and thus -bpp alone would be invalid.
>
> But then it contradicts itself some time later by documenting that
> video=HDMI-1:D is ok.
>
> I guess what you experienced was just an oversight: it was not
> documented anywhere that it was valid, so we didn't really tested it
> either. We should add a unit test for it and fix it.

Does dropping this "if (!mode_end)" check, and at least the check for
bpp_ptr in the "No mode?" block below it, seem reasonable to you?

I guess there is also the question of whether a refresh rate without a
mode is valid. That one seems less useful, and all uses of
refresh_specified appear to be after some form of checking xres and
yres.

I can put a couple of patches together to deal with this if you're
happy with the principle.

Thanks
  Dave

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

Hi Maxime

On Wed, 3 Jan 2024 at 13:33, Maxime Ripard <maxime@cerno.tech> wrote:
>
> Hi Dave,
>
> Happy new year :)

And to you.

> On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> > Hi Maxime
> >
> > On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> > >
> > > The current construction of the named mode parsing doesn't allow to extend
> > > it easily. Let's move it to a separate function so we can add more
> > > parameters and modes.
> > >
> > > In order for the tests to still pass, some extra checks are needed, so
> > > it's not a 1:1 move.
> > >
> > > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > >
> > > ---
> > > Changes in v7:
> > > - Add Noralf Reviewed-by
> > >
> > > Changes in v6:
> > > - Simplify the test for connection status extras
> > > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> > >
> > > Changes in v4:
> > > - Fold down all the named mode patches that were split into a single
> > >   patch again to maintain bisectability
> > > ---
> > >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> > >  1 file changed, 58 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > index 71c050c3ee6b..37542612912b 100644
> > > --- a/drivers/gpu/drm/drm_modes.c
> > > +++ b/drivers/gpu/drm/drm_modes.c
> > > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> > >         "PAL",
> > >  };
> > >
> > > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > > +                                            unsigned int name_end,
> > > +                                            struct drm_cmdline_mode *cmdline_mode)
> > > +{
> > > +       unsigned int i;
> > > +
> > > +       if (!name_end)
> > > +               return 0;
> > > +
> > > +       /* If the name starts with a digit, it's not a named mode */
> > > +       if (isdigit(name[0]))
> > > +               return 0;
> > > +
> > > +       /*
> > > +        * If there's an equal sign in the name, the command-line
> > > +        * contains only an option and no mode.
> > > +        */
> > > +       if (strnchr(name, name_end, '='))
> > > +               return 0;
> > > +
> > > +       /* The connection status extras can be set without a mode. */
> > > +       if (name_end == 1 &&
> > > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > > +               return 0;
> > > +
> > > +       /*
> > > +        * We're sure we're a named mode at this point, iterate over the
> > > +        * list of modes we're aware of.
> > > +        */
> > > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > +               int ret;
> > > +
> > > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > +               if (ret != name_end)
> > > +                       continue;
> > > +
> > > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > > +               cmdline_mode->specified = true;
> > > +
> > > +               return 1;
> > > +       }
> > > +
> > > +       return -EINVAL;
> > > +}
> > > +
> > >  /**
> > >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> > >   * @mode_option: optional per connector mode option
> > > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> > >         const char *options_ptr = NULL;
> > >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > > -       int i, len, ret;
> > > +       int len, ret;
> > >
> > >         memset(mode, 0, sizeof(*mode));
> > >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > >                 parse_extras = true;
> > >         }
> > >
> > > -       /* First check for a named mode */
> > > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > -               if (ret == mode_end) {
> > > -                       if (refresh_ptr)
> > > -                               return false; /* named + refresh is invalid */
> > > +       if (!mode_end)
> > > +               return false;
> >
> > I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> > patch seems to be at least part of the cause.
> >
> > Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> > memory. All good.
> >
> > It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> > command line to set it back to 32bpp.
> >
> > After this patch that is no longer possible. "mode_end = bpp_off", and
> > "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> > being 0. That fails this conditional.
> > drm_mode_parse_cmdline_named_mode already aborts early but with no
> > error if name_end / mode_end is 0, so this "if" clause seems
> > redundant, and is a change in behaviour.
> >
> > We do then get a second parsing failure due to the check if (bpp_ptr
> > || refresh_ptr) at [2].
> > Prior to this patch my video= line would get mode->specified set via
> > "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> > therefore didn't evaluate the conditional that now fails.
> >
> > So I guess my question is whether my command line is valid or not, and
> > therefore is this a regression?
>
> It's a mess :)
>
> Documentation/fb/modedb.rst defines the video parameter syntax as:
>
> <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
>
> And thus mandates the x and y resolution. I guess that's what I use as a
> base, and thus -bpp alone would be invalid.
>
> But then it contradicts itself some time later by documenting that
> video=HDMI-1:D is ok.
>
> I guess what you experienced was just an oversight: it was not
> documented anywhere that it was valid, so we didn't really tested it
> either. We should add a unit test for it and fix it.

Does dropping this "if (!mode_end)" check, and at least the check for
bpp_ptr in the "No mode?" block below it, seem reasonable to you?

I guess there is also the question of whether a refresh rate without a
mode is valid. That one seems less useful, and all uses of
refresh_specified appear to be after some form of checking xres and
yres.

I can put a couple of patches together to deal with this if you're
happy with the principle.

Thanks
  Dave

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

Hi Maxime

On Wed, 3 Jan 2024 at 13:33, Maxime Ripard <maxime@cerno.tech> wrote:
>
> Hi Dave,
>
> Happy new year :)

And to you.

> On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> > Hi Maxime
> >
> > On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> > >
> > > The current construction of the named mode parsing doesn't allow to extend
> > > it easily. Let's move it to a separate function so we can add more
> > > parameters and modes.
> > >
> > > In order for the tests to still pass, some extra checks are needed, so
> > > it's not a 1:1 move.
> > >
> > > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > >
> > > ---
> > > Changes in v7:
> > > - Add Noralf Reviewed-by
> > >
> > > Changes in v6:
> > > - Simplify the test for connection status extras
> > > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> > >
> > > Changes in v4:
> > > - Fold down all the named mode patches that were split into a single
> > >   patch again to maintain bisectability
> > > ---
> > >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> > >  1 file changed, 58 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > index 71c050c3ee6b..37542612912b 100644
> > > --- a/drivers/gpu/drm/drm_modes.c
> > > +++ b/drivers/gpu/drm/drm_modes.c
> > > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> > >         "PAL",
> > >  };
> > >
> > > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > > +                                            unsigned int name_end,
> > > +                                            struct drm_cmdline_mode *cmdline_mode)
> > > +{
> > > +       unsigned int i;
> > > +
> > > +       if (!name_end)
> > > +               return 0;
> > > +
> > > +       /* If the name starts with a digit, it's not a named mode */
> > > +       if (isdigit(name[0]))
> > > +               return 0;
> > > +
> > > +       /*
> > > +        * If there's an equal sign in the name, the command-line
> > > +        * contains only an option and no mode.
> > > +        */
> > > +       if (strnchr(name, name_end, '='))
> > > +               return 0;
> > > +
> > > +       /* The connection status extras can be set without a mode. */
> > > +       if (name_end == 1 &&
> > > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > > +               return 0;
> > > +
> > > +       /*
> > > +        * We're sure we're a named mode at this point, iterate over the
> > > +        * list of modes we're aware of.
> > > +        */
> > > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > +               int ret;
> > > +
> > > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > +               if (ret != name_end)
> > > +                       continue;
> > > +
> > > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > > +               cmdline_mode->specified = true;
> > > +
> > > +               return 1;
> > > +       }
> > > +
> > > +       return -EINVAL;
> > > +}
> > > +
> > >  /**
> > >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> > >   * @mode_option: optional per connector mode option
> > > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> > >         const char *options_ptr = NULL;
> > >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > > -       int i, len, ret;
> > > +       int len, ret;
> > >
> > >         memset(mode, 0, sizeof(*mode));
> > >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > >                 parse_extras = true;
> > >         }
> > >
> > > -       /* First check for a named mode */
> > > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > -               if (ret == mode_end) {
> > > -                       if (refresh_ptr)
> > > -                               return false; /* named + refresh is invalid */
> > > +       if (!mode_end)
> > > +               return false;
> >
> > I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> > patch seems to be at least part of the cause.
> >
> > Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> > memory. All good.
> >
> > It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> > command line to set it back to 32bpp.
> >
> > After this patch that is no longer possible. "mode_end = bpp_off", and
> > "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> > being 0. That fails this conditional.
> > drm_mode_parse_cmdline_named_mode already aborts early but with no
> > error if name_end / mode_end is 0, so this "if" clause seems
> > redundant, and is a change in behaviour.
> >
> > We do then get a second parsing failure due to the check if (bpp_ptr
> > || refresh_ptr) at [2].
> > Prior to this patch my video= line would get mode->specified set via
> > "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> > therefore didn't evaluate the conditional that now fails.
> >
> > So I guess my question is whether my command line is valid or not, and
> > therefore is this a regression?
>
> It's a mess :)
>
> Documentation/fb/modedb.rst defines the video parameter syntax as:
>
> <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
>
> And thus mandates the x and y resolution. I guess that's what I use as a
> base, and thus -bpp alone would be invalid.
>
> But then it contradicts itself some time later by documenting that
> video=HDMI-1:D is ok.
>
> I guess what you experienced was just an oversight: it was not
> documented anywhere that it was valid, so we didn't really tested it
> either. We should add a unit test for it and fix it.

Does dropping this "if (!mode_end)" check, and at least the check for
bpp_ptr in the "No mode?" block below it, seem reasonable to you?

I guess there is also the question of whether a refresh rate without a
mode is valid. That one seems less useful, and all uses of
refresh_specified appear to be after some form of checking xres and
yres.

I can put a couple of patches together to deal with this if you're
happy with the principle.

Thanks
  Dave

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

Hi Maxime

On Wed, 3 Jan 2024 at 13:33, Maxime Ripard <maxime@cerno.tech> wrote:
>
> Hi Dave,
>
> Happy new year :)

And to you.

> On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> > Hi Maxime
> >
> > On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> > >
> > > The current construction of the named mode parsing doesn't allow to extend
> > > it easily. Let's move it to a separate function so we can add more
> > > parameters and modes.
> > >
> > > In order for the tests to still pass, some extra checks are needed, so
> > > it's not a 1:1 move.
> > >
> > > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > >
> > > ---
> > > Changes in v7:
> > > - Add Noralf Reviewed-by
> > >
> > > Changes in v6:
> > > - Simplify the test for connection status extras
> > > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> > >
> > > Changes in v4:
> > > - Fold down all the named mode patches that were split into a single
> > >   patch again to maintain bisectability
> > > ---
> > >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> > >  1 file changed, 58 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > index 71c050c3ee6b..37542612912b 100644
> > > --- a/drivers/gpu/drm/drm_modes.c
> > > +++ b/drivers/gpu/drm/drm_modes.c
> > > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> > >         "PAL",
> > >  };
> > >
> > > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > > +                                            unsigned int name_end,
> > > +                                            struct drm_cmdline_mode *cmdline_mode)
> > > +{
> > > +       unsigned int i;
> > > +
> > > +       if (!name_end)
> > > +               return 0;
> > > +
> > > +       /* If the name starts with a digit, it's not a named mode */
> > > +       if (isdigit(name[0]))
> > > +               return 0;
> > > +
> > > +       /*
> > > +        * If there's an equal sign in the name, the command-line
> > > +        * contains only an option and no mode.
> > > +        */
> > > +       if (strnchr(name, name_end, '='))
> > > +               return 0;
> > > +
> > > +       /* The connection status extras can be set without a mode. */
> > > +       if (name_end == 1 &&
> > > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > > +               return 0;
> > > +
> > > +       /*
> > > +        * We're sure we're a named mode at this point, iterate over the
> > > +        * list of modes we're aware of.
> > > +        */
> > > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > +               int ret;
> > > +
> > > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > +               if (ret != name_end)
> > > +                       continue;
> > > +
> > > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > > +               cmdline_mode->specified = true;
> > > +
> > > +               return 1;
> > > +       }
> > > +
> > > +       return -EINVAL;
> > > +}
> > > +
> > >  /**
> > >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> > >   * @mode_option: optional per connector mode option
> > > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> > >         const char *options_ptr = NULL;
> > >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > > -       int i, len, ret;
> > > +       int len, ret;
> > >
> > >         memset(mode, 0, sizeof(*mode));
> > >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > >                 parse_extras = true;
> > >         }
> > >
> > > -       /* First check for a named mode */
> > > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > -               if (ret == mode_end) {
> > > -                       if (refresh_ptr)
> > > -                               return false; /* named + refresh is invalid */
> > > +       if (!mode_end)
> > > +               return false;
> >
> > I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> > patch seems to be at least part of the cause.
> >
> > Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> > memory. All good.
> >
> > It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> > command line to set it back to 32bpp.
> >
> > After this patch that is no longer possible. "mode_end = bpp_off", and
> > "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> > being 0. That fails this conditional.
> > drm_mode_parse_cmdline_named_mode already aborts early but with no
> > error if name_end / mode_end is 0, so this "if" clause seems
> > redundant, and is a change in behaviour.
> >
> > We do then get a second parsing failure due to the check if (bpp_ptr
> > || refresh_ptr) at [2].
> > Prior to this patch my video= line would get mode->specified set via
> > "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> > therefore didn't evaluate the conditional that now fails.
> >
> > So I guess my question is whether my command line is valid or not, and
> > therefore is this a regression?
>
> It's a mess :)
>
> Documentation/fb/modedb.rst defines the video parameter syntax as:
>
> <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
>
> And thus mandates the x and y resolution. I guess that's what I use as a
> base, and thus -bpp alone would be invalid.
>
> But then it contradicts itself some time later by documenting that
> video=HDMI-1:D is ok.
>
> I guess what you experienced was just an oversight: it was not
> documented anywhere that it was valid, so we didn't really tested it
> either. We should add a unit test for it and fix it.

Does dropping this "if (!mode_end)" check, and at least the check for
bpp_ptr in the "No mode?" block below it, seem reasonable to you?

I guess there is also the question of whether a refresh rate without a
mode is valid. That one seems less useful, and all uses of
refresh_specified appear to be after some form of checking xres and
yres.

I can put a couple of patches together to deal with this if you're
happy with the principle.

Thanks
  Dave

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

Hi Maxime

On Wed, 3 Jan 2024 at 13:33, Maxime Ripard <maxime@cerno.tech> wrote:
>
> Hi Dave,
>
> Happy new year :)

And to you.

> On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> > Hi Maxime
> >
> > On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> > >
> > > The current construction of the named mode parsing doesn't allow to extend
> > > it easily. Let's move it to a separate function so we can add more
> > > parameters and modes.
> > >
> > > In order for the tests to still pass, some extra checks are needed, so
> > > it's not a 1:1 move.
> > >
> > > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > >
> > > ---
> > > Changes in v7:
> > > - Add Noralf Reviewed-by
> > >
> > > Changes in v6:
> > > - Simplify the test for connection status extras
> > > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> > >
> > > Changes in v4:
> > > - Fold down all the named mode patches that were split into a single
> > >   patch again to maintain bisectability
> > > ---
> > >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> > >  1 file changed, 58 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > index 71c050c3ee6b..37542612912b 100644
> > > --- a/drivers/gpu/drm/drm_modes.c
> > > +++ b/drivers/gpu/drm/drm_modes.c
> > > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> > >         "PAL",
> > >  };
> > >
> > > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > > +                                            unsigned int name_end,
> > > +                                            struct drm_cmdline_mode *cmdline_mode)
> > > +{
> > > +       unsigned int i;
> > > +
> > > +       if (!name_end)
> > > +               return 0;
> > > +
> > > +       /* If the name starts with a digit, it's not a named mode */
> > > +       if (isdigit(name[0]))
> > > +               return 0;
> > > +
> > > +       /*
> > > +        * If there's an equal sign in the name, the command-line
> > > +        * contains only an option and no mode.
> > > +        */
> > > +       if (strnchr(name, name_end, '='))
> > > +               return 0;
> > > +
> > > +       /* The connection status extras can be set without a mode. */
> > > +       if (name_end == 1 &&
> > > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > > +               return 0;
> > > +
> > > +       /*
> > > +        * We're sure we're a named mode at this point, iterate over the
> > > +        * list of modes we're aware of.
> > > +        */
> > > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > +               int ret;
> > > +
> > > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > +               if (ret != name_end)
> > > +                       continue;
> > > +
> > > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > > +               cmdline_mode->specified = true;
> > > +
> > > +               return 1;
> > > +       }
> > > +
> > > +       return -EINVAL;
> > > +}
> > > +
> > >  /**
> > >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> > >   * @mode_option: optional per connector mode option
> > > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> > >         const char *options_ptr = NULL;
> > >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > > -       int i, len, ret;
> > > +       int len, ret;
> > >
> > >         memset(mode, 0, sizeof(*mode));
> > >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > >                 parse_extras = true;
> > >         }
> > >
> > > -       /* First check for a named mode */
> > > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > -               if (ret == mode_end) {
> > > -                       if (refresh_ptr)
> > > -                               return false; /* named + refresh is invalid */
> > > +       if (!mode_end)
> > > +               return false;
> >
> > I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> > patch seems to be at least part of the cause.
> >
> > Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> > memory. All good.
> >
> > It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> > command line to set it back to 32bpp.
> >
> > After this patch that is no longer possible. "mode_end = bpp_off", and
> > "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> > being 0. That fails this conditional.
> > drm_mode_parse_cmdline_named_mode already aborts early but with no
> > error if name_end / mode_end is 0, so this "if" clause seems
> > redundant, and is a change in behaviour.
> >
> > We do then get a second parsing failure due to the check if (bpp_ptr
> > || refresh_ptr) at [2].
> > Prior to this patch my video= line would get mode->specified set via
> > "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> > therefore didn't evaluate the conditional that now fails.
> >
> > So I guess my question is whether my command line is valid or not, and
> > therefore is this a regression?
>
> It's a mess :)
>
> Documentation/fb/modedb.rst defines the video parameter syntax as:
>
> <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
>
> And thus mandates the x and y resolution. I guess that's what I use as a
> base, and thus -bpp alone would be invalid.
>
> But then it contradicts itself some time later by documenting that
> video=HDMI-1:D is ok.
>
> I guess what you experienced was just an oversight: it was not
> documented anywhere that it was valid, so we didn't really tested it
> either. We should add a unit test for it and fix it.

Does dropping this "if (!mode_end)" check, and at least the check for
bpp_ptr in the "No mode?" block below it, seem reasonable to you?

I guess there is also the question of whether a refresh rate without a
mode is valid. That one seems less useful, and all uses of
refresh_specified appear to be after some form of checking xres and
yres.

I can put a couple of patches together to deal with this if you're
happy with the principle.

Thanks
  Dave

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

On Wed, 3 Jan 2024 at 14:02, Dave Stevenson
<dave.stevenson@raspberrypi.com> wrote:
>
> Hi Maxime
>
> On Wed, 3 Jan 2024 at 13:33, Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > Hi Dave,
> >
> > Happy new year :)
>
> And to you.
>
> > On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> > > Hi Maxime
> > >
> > > On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> > > >
> > > > The current construction of the named mode parsing doesn't allow to extend
> > > > it easily. Let's move it to a separate function so we can add more
> > > > parameters and modes.
> > > >
> > > > In order for the tests to still pass, some extra checks are needed, so
> > > > it's not a 1:1 move.
> > > >
> > > > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > > > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > > > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > > >
> > > > ---
> > > > Changes in v7:
> > > > - Add Noralf Reviewed-by
> > > >
> > > > Changes in v6:
> > > > - Simplify the test for connection status extras
> > > > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> > > >
> > > > Changes in v4:
> > > > - Fold down all the named mode patches that were split into a single
> > > >   patch again to maintain bisectability
> > > > ---
> > > >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> > > >  1 file changed, 58 insertions(+), 12 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > > index 71c050c3ee6b..37542612912b 100644
> > > > --- a/drivers/gpu/drm/drm_modes.c
> > > > +++ b/drivers/gpu/drm/drm_modes.c
> > > > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> > > >         "PAL",
> > > >  };
> > > >
> > > > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > > > +                                            unsigned int name_end,
> > > > +                                            struct drm_cmdline_mode *cmdline_mode)
> > > > +{
> > > > +       unsigned int i;
> > > > +
> > > > +       if (!name_end)
> > > > +               return 0;
> > > > +
> > > > +       /* If the name starts with a digit, it's not a named mode */
> > > > +       if (isdigit(name[0]))
> > > > +               return 0;
> > > > +
> > > > +       /*
> > > > +        * If there's an equal sign in the name, the command-line
> > > > +        * contains only an option and no mode.
> > > > +        */
> > > > +       if (strnchr(name, name_end, '='))
> > > > +               return 0;
> > > > +
> > > > +       /* The connection status extras can be set without a mode. */
> > > > +       if (name_end == 1 &&
> > > > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > > > +               return 0;
> > > > +
> > > > +       /*
> > > > +        * We're sure we're a named mode at this point, iterate over the
> > > > +        * list of modes we're aware of.
> > > > +        */
> > > > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > > +               int ret;
> > > > +
> > > > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > > +               if (ret != name_end)
> > > > +                       continue;
> > > > +
> > > > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > > > +               cmdline_mode->specified = true;
> > > > +
> > > > +               return 1;
> > > > +       }
> > > > +
> > > > +       return -EINVAL;
> > > > +}
> > > > +
> > > >  /**
> > > >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> > > >   * @mode_option: optional per connector mode option
> > > > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > > >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> > > >         const char *options_ptr = NULL;
> > > >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > > > -       int i, len, ret;
> > > > +       int len, ret;
> > > >
> > > >         memset(mode, 0, sizeof(*mode));
> > > >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > > > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > > >                 parse_extras = true;
> > > >         }
> > > >
> > > > -       /* First check for a named mode */
> > > > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > > -               if (ret == mode_end) {
> > > > -                       if (refresh_ptr)
> > > > -                               return false; /* named + refresh is invalid */
> > > > +       if (!mode_end)
> > > > +               return false;
> > >
> > > I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> > > patch seems to be at least part of the cause.
> > >
> > > Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> > > memory. All good.
> > >
> > > It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> > > command line to set it back to 32bpp.
> > >
> > > After this patch that is no longer possible. "mode_end = bpp_off", and
> > > "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> > > being 0. That fails this conditional.
> > > drm_mode_parse_cmdline_named_mode already aborts early but with no
> > > error if name_end / mode_end is 0, so this "if" clause seems
> > > redundant, and is a change in behaviour.
> > >
> > > We do then get a second parsing failure due to the check if (bpp_ptr
> > > || refresh_ptr) at [2].
> > > Prior to this patch my video= line would get mode->specified set via
> > > "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> > > therefore didn't evaluate the conditional that now fails.
> > >
> > > So I guess my question is whether my command line is valid or not, and
> > > therefore is this a regression?
> >
> > It's a mess :)
> >
> > Documentation/fb/modedb.rst defines the video parameter syntax as:
> >
> > <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
> >
> > And thus mandates the x and y resolution. I guess that's what I use as a
> > base, and thus -bpp alone would be invalid.
> >
> > But then it contradicts itself some time later by documenting that
> > video=HDMI-1:D is ok.
> >
> > I guess what you experienced was just an oversight: it was not
> > documented anywhere that it was valid, so we didn't really tested it
> > either. We should add a unit test for it and fix it.
>
> Does dropping this "if (!mode_end)" check, and at least the check for
> bpp_ptr in the "No mode?" block below it, seem reasonable to you?
>
> I guess there is also the question of whether a refresh rate without a
> mode is valid. That one seems less useful, and all uses of
> refresh_specified appear to be after some form of checking xres and
> yres.
>
> I can put a couple of patches together to deal with this if you're
> happy with the principle.

In looking at this in more detail and writing the unit test, it does
become a bit of a mess.

drm_connector_get_cmdline_mode calls
drm_mode_parse_command_line_for_connector, passing in
connector->cmdline_mode as the mode to fill.
drm_mode_parse_command_line_for_connector fills in bits of the mode as
it goes along, so a failure late in the function leaves bits from the
parsing in connector->cmdline_mode.

My video=HDMI-A-1:-32 does fail later on due to
drm_mode_parse_cmdline_options, but as it had set bpp and
bpp_specified directly in connector->cmdline_mode I got the behaviour
I was desiring.

It feels like this should be an all or nothing thing. Allocate a
struct drm_cmdline_mode on the stack, and only copy it into
connector->cmdline_mode if parsing succeeds. The downside is that you
take out some command line entries that used to work (like mine).
Thoughts?

  Dave

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

On Wed, 3 Jan 2024 at 14:02, Dave Stevenson
<dave.stevenson@raspberrypi.com> wrote:
>
> Hi Maxime
>
> On Wed, 3 Jan 2024 at 13:33, Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > Hi Dave,
> >
> > Happy new year :)
>
> And to you.
>
> > On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> > > Hi Maxime
> > >
> > > On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> > > >
> > > > The current construction of the named mode parsing doesn't allow to extend
> > > > it easily. Let's move it to a separate function so we can add more
> > > > parameters and modes.
> > > >
> > > > In order for the tests to still pass, some extra checks are needed, so
> > > > it's not a 1:1 move.
> > > >
> > > > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > > > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > > > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > > >
> > > > ---
> > > > Changes in v7:
> > > > - Add Noralf Reviewed-by
> > > >
> > > > Changes in v6:
> > > > - Simplify the test for connection status extras
> > > > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> > > >
> > > > Changes in v4:
> > > > - Fold down all the named mode patches that were split into a single
> > > >   patch again to maintain bisectability
> > > > ---
> > > >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> > > >  1 file changed, 58 insertions(+), 12 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > > index 71c050c3ee6b..37542612912b 100644
> > > > --- a/drivers/gpu/drm/drm_modes.c
> > > > +++ b/drivers/gpu/drm/drm_modes.c
> > > > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> > > >         "PAL",
> > > >  };
> > > >
> > > > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > > > +                                            unsigned int name_end,
> > > > +                                            struct drm_cmdline_mode *cmdline_mode)
> > > > +{
> > > > +       unsigned int i;
> > > > +
> > > > +       if (!name_end)
> > > > +               return 0;
> > > > +
> > > > +       /* If the name starts with a digit, it's not a named mode */
> > > > +       if (isdigit(name[0]))
> > > > +               return 0;
> > > > +
> > > > +       /*
> > > > +        * If there's an equal sign in the name, the command-line
> > > > +        * contains only an option and no mode.
> > > > +        */
> > > > +       if (strnchr(name, name_end, '='))
> > > > +               return 0;
> > > > +
> > > > +       /* The connection status extras can be set without a mode. */
> > > > +       if (name_end == 1 &&
> > > > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > > > +               return 0;
> > > > +
> > > > +       /*
> > > > +        * We're sure we're a named mode at this point, iterate over the
> > > > +        * list of modes we're aware of.
> > > > +        */
> > > > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > > +               int ret;
> > > > +
> > > > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > > +               if (ret != name_end)
> > > > +                       continue;
> > > > +
> > > > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > > > +               cmdline_mode->specified = true;
> > > > +
> > > > +               return 1;
> > > > +       }
> > > > +
> > > > +       return -EINVAL;
> > > > +}
> > > > +
> > > >  /**
> > > >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> > > >   * @mode_option: optional per connector mode option
> > > > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > > >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> > > >         const char *options_ptr = NULL;
> > > >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > > > -       int i, len, ret;
> > > > +       int len, ret;
> > > >
> > > >         memset(mode, 0, sizeof(*mode));
> > > >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > > > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > > >                 parse_extras = true;
> > > >         }
> > > >
> > > > -       /* First check for a named mode */
> > > > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > > -               if (ret == mode_end) {
> > > > -                       if (refresh_ptr)
> > > > -                               return false; /* named + refresh is invalid */
> > > > +       if (!mode_end)
> > > > +               return false;
> > >
> > > I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> > > patch seems to be at least part of the cause.
> > >
> > > Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> > > memory. All good.
> > >
> > > It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> > > command line to set it back to 32bpp.
> > >
> > > After this patch that is no longer possible. "mode_end = bpp_off", and
> > > "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> > > being 0. That fails this conditional.
> > > drm_mode_parse_cmdline_named_mode already aborts early but with no
> > > error if name_end / mode_end is 0, so this "if" clause seems
> > > redundant, and is a change in behaviour.
> > >
> > > We do then get a second parsing failure due to the check if (bpp_ptr
> > > || refresh_ptr) at [2].
> > > Prior to this patch my video= line would get mode->specified set via
> > > "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> > > therefore didn't evaluate the conditional that now fails.
> > >
> > > So I guess my question is whether my command line is valid or not, and
> > > therefore is this a regression?
> >
> > It's a mess :)
> >
> > Documentation/fb/modedb.rst defines the video parameter syntax as:
> >
> > <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
> >
> > And thus mandates the x and y resolution. I guess that's what I use as a
> > base, and thus -bpp alone would be invalid.
> >
> > But then it contradicts itself some time later by documenting that
> > video=HDMI-1:D is ok.
> >
> > I guess what you experienced was just an oversight: it was not
> > documented anywhere that it was valid, so we didn't really tested it
> > either. We should add a unit test for it and fix it.
>
> Does dropping this "if (!mode_end)" check, and at least the check for
> bpp_ptr in the "No mode?" block below it, seem reasonable to you?
>
> I guess there is also the question of whether a refresh rate without a
> mode is valid. That one seems less useful, and all uses of
> refresh_specified appear to be after some form of checking xres and
> yres.
>
> I can put a couple of patches together to deal with this if you're
> happy with the principle.

In looking at this in more detail and writing the unit test, it does
become a bit of a mess.

drm_connector_get_cmdline_mode calls
drm_mode_parse_command_line_for_connector, passing in
connector->cmdline_mode as the mode to fill.
drm_mode_parse_command_line_for_connector fills in bits of the mode as
it goes along, so a failure late in the function leaves bits from the
parsing in connector->cmdline_mode.

My video=HDMI-A-1:-32 does fail later on due to
drm_mode_parse_cmdline_options, but as it had set bpp and
bpp_specified directly in connector->cmdline_mode I got the behaviour
I was desiring.

It feels like this should be an all or nothing thing. Allocate a
struct drm_cmdline_mode on the stack, and only copy it into
connector->cmdline_mode if parsing succeeds. The downside is that you
take out some command line entries that used to work (like mine).
Thoughts?

  Dave

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

On Wed, 3 Jan 2024 at 14:02, Dave Stevenson
<dave.stevenson@raspberrypi.com> wrote:
>
> Hi Maxime
>
> On Wed, 3 Jan 2024 at 13:33, Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > Hi Dave,
> >
> > Happy new year :)
>
> And to you.
>
> > On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> > > Hi Maxime
> > >
> > > On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> > > >
> > > > The current construction of the named mode parsing doesn't allow to extend
> > > > it easily. Let's move it to a separate function so we can add more
> > > > parameters and modes.
> > > >
> > > > In order for the tests to still pass, some extra checks are needed, so
> > > > it's not a 1:1 move.
> > > >
> > > > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > > > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > > > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > > >
> > > > ---
> > > > Changes in v7:
> > > > - Add Noralf Reviewed-by
> > > >
> > > > Changes in v6:
> > > > - Simplify the test for connection status extras
> > > > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> > > >
> > > > Changes in v4:
> > > > - Fold down all the named mode patches that were split into a single
> > > >   patch again to maintain bisectability
> > > > ---
> > > >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> > > >  1 file changed, 58 insertions(+), 12 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > > index 71c050c3ee6b..37542612912b 100644
> > > > --- a/drivers/gpu/drm/drm_modes.c
> > > > +++ b/drivers/gpu/drm/drm_modes.c
> > > > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> > > >         "PAL",
> > > >  };
> > > >
> > > > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > > > +                                            unsigned int name_end,
> > > > +                                            struct drm_cmdline_mode *cmdline_mode)
> > > > +{
> > > > +       unsigned int i;
> > > > +
> > > > +       if (!name_end)
> > > > +               return 0;
> > > > +
> > > > +       /* If the name starts with a digit, it's not a named mode */
> > > > +       if (isdigit(name[0]))
> > > > +               return 0;
> > > > +
> > > > +       /*
> > > > +        * If there's an equal sign in the name, the command-line
> > > > +        * contains only an option and no mode.
> > > > +        */
> > > > +       if (strnchr(name, name_end, '='))
> > > > +               return 0;
> > > > +
> > > > +       /* The connection status extras can be set without a mode. */
> > > > +       if (name_end == 1 &&
> > > > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > > > +               return 0;
> > > > +
> > > > +       /*
> > > > +        * We're sure we're a named mode at this point, iterate over the
> > > > +        * list of modes we're aware of.
> > > > +        */
> > > > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > > +               int ret;
> > > > +
> > > > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > > +               if (ret != name_end)
> > > > +                       continue;
> > > > +
> > > > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > > > +               cmdline_mode->specified = true;
> > > > +
> > > > +               return 1;
> > > > +       }
> > > > +
> > > > +       return -EINVAL;
> > > > +}
> > > > +
> > > >  /**
> > > >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> > > >   * @mode_option: optional per connector mode option
> > > > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > > >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> > > >         const char *options_ptr = NULL;
> > > >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > > > -       int i, len, ret;
> > > > +       int len, ret;
> > > >
> > > >         memset(mode, 0, sizeof(*mode));
> > > >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > > > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > > >                 parse_extras = true;
> > > >         }
> > > >
> > > > -       /* First check for a named mode */
> > > > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > > -               if (ret == mode_end) {
> > > > -                       if (refresh_ptr)
> > > > -                               return false; /* named + refresh is invalid */
> > > > +       if (!mode_end)
> > > > +               return false;
> > >
> > > I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> > > patch seems to be at least part of the cause.
> > >
> > > Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> > > memory. All good.
> > >
> > > It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> > > command line to set it back to 32bpp.
> > >
> > > After this patch that is no longer possible. "mode_end = bpp_off", and
> > > "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> > > being 0. That fails this conditional.
> > > drm_mode_parse_cmdline_named_mode already aborts early but with no
> > > error if name_end / mode_end is 0, so this "if" clause seems
> > > redundant, and is a change in behaviour.
> > >
> > > We do then get a second parsing failure due to the check if (bpp_ptr
> > > || refresh_ptr) at [2].
> > > Prior to this patch my video= line would get mode->specified set via
> > > "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> > > therefore didn't evaluate the conditional that now fails.
> > >
> > > So I guess my question is whether my command line is valid or not, and
> > > therefore is this a regression?
> >
> > It's a mess :)
> >
> > Documentation/fb/modedb.rst defines the video parameter syntax as:
> >
> > <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
> >
> > And thus mandates the x and y resolution. I guess that's what I use as a
> > base, and thus -bpp alone would be invalid.
> >
> > But then it contradicts itself some time later by documenting that
> > video=HDMI-1:D is ok.
> >
> > I guess what you experienced was just an oversight: it was not
> > documented anywhere that it was valid, so we didn't really tested it
> > either. We should add a unit test for it and fix it.
>
> Does dropping this "if (!mode_end)" check, and at least the check for
> bpp_ptr in the "No mode?" block below it, seem reasonable to you?
>
> I guess there is also the question of whether a refresh rate without a
> mode is valid. That one seems less useful, and all uses of
> refresh_specified appear to be after some form of checking xres and
> yres.
>
> I can put a couple of patches together to deal with this if you're
> happy with the principle.

In looking at this in more detail and writing the unit test, it does
become a bit of a mess.

drm_connector_get_cmdline_mode calls
drm_mode_parse_command_line_for_connector, passing in
connector->cmdline_mode as the mode to fill.
drm_mode_parse_command_line_for_connector fills in bits of the mode as
it goes along, so a failure late in the function leaves bits from the
parsing in connector->cmdline_mode.

My video=HDMI-A-1:-32 does fail later on due to
drm_mode_parse_cmdline_options, but as it had set bpp and
bpp_specified directly in connector->cmdline_mode I got the behaviour
I was desiring.

It feels like this should be an all or nothing thing. Allocate a
struct drm_cmdline_mode on the stack, and only copy it into
connector->cmdline_mode if parsing succeeds. The downside is that you
take out some command line entries that used to work (like mine).
Thoughts?

  Dave

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

On Wed, 3 Jan 2024 at 14:02, Dave Stevenson
<dave.stevenson@raspberrypi.com> wrote:
>
> Hi Maxime
>
> On Wed, 3 Jan 2024 at 13:33, Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > Hi Dave,
> >
> > Happy new year :)
>
> And to you.
>
> > On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> > > Hi Maxime
> > >
> > > On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> > > >
> > > > The current construction of the named mode parsing doesn't allow to extend
> > > > it easily. Let's move it to a separate function so we can add more
> > > > parameters and modes.
> > > >
> > > > In order for the tests to still pass, some extra checks are needed, so
> > > > it's not a 1:1 move.
> > > >
> > > > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > > > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > > > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > > >
> > > > ---
> > > > Changes in v7:
> > > > - Add Noralf Reviewed-by
> > > >
> > > > Changes in v6:
> > > > - Simplify the test for connection status extras
> > > > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> > > >
> > > > Changes in v4:
> > > > - Fold down all the named mode patches that were split into a single
> > > >   patch again to maintain bisectability
> > > > ---
> > > >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> > > >  1 file changed, 58 insertions(+), 12 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > > index 71c050c3ee6b..37542612912b 100644
> > > > --- a/drivers/gpu/drm/drm_modes.c
> > > > +++ b/drivers/gpu/drm/drm_modes.c
> > > > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> > > >         "PAL",
> > > >  };
> > > >
> > > > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > > > +                                            unsigned int name_end,
> > > > +                                            struct drm_cmdline_mode *cmdline_mode)
> > > > +{
> > > > +       unsigned int i;
> > > > +
> > > > +       if (!name_end)
> > > > +               return 0;
> > > > +
> > > > +       /* If the name starts with a digit, it's not a named mode */
> > > > +       if (isdigit(name[0]))
> > > > +               return 0;
> > > > +
> > > > +       /*
> > > > +        * If there's an equal sign in the name, the command-line
> > > > +        * contains only an option and no mode.
> > > > +        */
> > > > +       if (strnchr(name, name_end, '='))
> > > > +               return 0;
> > > > +
> > > > +       /* The connection status extras can be set without a mode. */
> > > > +       if (name_end == 1 &&
> > > > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > > > +               return 0;
> > > > +
> > > > +       /*
> > > > +        * We're sure we're a named mode at this point, iterate over the
> > > > +        * list of modes we're aware of.
> > > > +        */
> > > > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > > +               int ret;
> > > > +
> > > > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > > +               if (ret != name_end)
> > > > +                       continue;
> > > > +
> > > > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > > > +               cmdline_mode->specified = true;
> > > > +
> > > > +               return 1;
> > > > +       }
> > > > +
> > > > +       return -EINVAL;
> > > > +}
> > > > +
> > > >  /**
> > > >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> > > >   * @mode_option: optional per connector mode option
> > > > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > > >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> > > >         const char *options_ptr = NULL;
> > > >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > > > -       int i, len, ret;
> > > > +       int len, ret;
> > > >
> > > >         memset(mode, 0, sizeof(*mode));
> > > >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > > > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > > >                 parse_extras = true;
> > > >         }
> > > >
> > > > -       /* First check for a named mode */
> > > > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > > -               if (ret == mode_end) {
> > > > -                       if (refresh_ptr)
> > > > -                               return false; /* named + refresh is invalid */
> > > > +       if (!mode_end)
> > > > +               return false;
> > >
> > > I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> > > patch seems to be at least part of the cause.
> > >
> > > Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> > > memory. All good.
> > >
> > > It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> > > command line to set it back to 32bpp.
> > >
> > > After this patch that is no longer possible. "mode_end = bpp_off", and
> > > "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> > > being 0. That fails this conditional.
> > > drm_mode_parse_cmdline_named_mode already aborts early but with no
> > > error if name_end / mode_end is 0, so this "if" clause seems
> > > redundant, and is a change in behaviour.
> > >
> > > We do then get a second parsing failure due to the check if (bpp_ptr
> > > || refresh_ptr) at [2].
> > > Prior to this patch my video= line would get mode->specified set via
> > > "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> > > therefore didn't evaluate the conditional that now fails.
> > >
> > > So I guess my question is whether my command line is valid or not, and
> > > therefore is this a regression?
> >
> > It's a mess :)
> >
> > Documentation/fb/modedb.rst defines the video parameter syntax as:
> >
> > <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
> >
> > And thus mandates the x and y resolution. I guess that's what I use as a
> > base, and thus -bpp alone would be invalid.
> >
> > But then it contradicts itself some time later by documenting that
> > video=HDMI-1:D is ok.
> >
> > I guess what you experienced was just an oversight: it was not
> > documented anywhere that it was valid, so we didn't really tested it
> > either. We should add a unit test for it and fix it.
>
> Does dropping this "if (!mode_end)" check, and at least the check for
> bpp_ptr in the "No mode?" block below it, seem reasonable to you?
>
> I guess there is also the question of whether a refresh rate without a
> mode is valid. That one seems less useful, and all uses of
> refresh_specified appear to be after some form of checking xres and
> yres.
>
> I can put a couple of patches together to deal with this if you're
> happy with the principle.

In looking at this in more detail and writing the unit test, it does
become a bit of a mess.

drm_connector_get_cmdline_mode calls
drm_mode_parse_command_line_for_connector, passing in
connector->cmdline_mode as the mode to fill.
drm_mode_parse_command_line_for_connector fills in bits of the mode as
it goes along, so a failure late in the function leaves bits from the
parsing in connector->cmdline_mode.

My video=HDMI-A-1:-32 does fail later on due to
drm_mode_parse_cmdline_options, but as it had set bpp and
bpp_specified directly in connector->cmdline_mode I got the behaviour
I was desiring.

It feels like this should be an all or nothing thing. Allocate a
struct drm_cmdline_mode on the stack, and only copy it into
connector->cmdline_mode if parsing succeeds. The downside is that you
take out some command line entries that used to work (like mine).
Thoughts?

  Dave

Re: [PATCH v9 09/25] drm/modes: Move named modes parsing to a separate function

[Dave Stevenson]

On Wed, 3 Jan 2024 at 14:02, Dave Stevenson
<dave.stevenson@raspberrypi.com> wrote:
>
> Hi Maxime
>
> On Wed, 3 Jan 2024 at 13:33, Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > Hi Dave,
> >
> > Happy new year :)
>
> And to you.
>
> > On Tue, Jan 02, 2024 at 03:12:26PM +0000, Dave Stevenson wrote:
> > > Hi Maxime
> > >
> > > On Mon, 14 Nov 2022 at 13:00, Maxime Ripard <maxime@cerno.tech> wrote:
> > > >
> > > > The current construction of the named mode parsing doesn't allow to extend
> > > > it easily. Let's move it to a separate function so we can add more
> > > > parameters and modes.
> > > >
> > > > In order for the tests to still pass, some extra checks are needed, so
> > > > it's not a 1:1 move.
> > > >
> > > > Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
> > > > Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
> > > > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > > >
> > > > ---
> > > > Changes in v7:
> > > > - Add Noralf Reviewed-by
> > > >
> > > > Changes in v6:
> > > > - Simplify the test for connection status extras
> > > > - Simplify the code path to call drm_mode_parse_cmdline_named_mode
> > > >
> > > > Changes in v4:
> > > > - Fold down all the named mode patches that were split into a single
> > > >   patch again to maintain bisectability
> > > > ---
> > > >  drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
> > > >  1 file changed, 58 insertions(+), 12 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > > index 71c050c3ee6b..37542612912b 100644
> > > > --- a/drivers/gpu/drm/drm_modes.c
> > > > +++ b/drivers/gpu/drm/drm_modes.c
> > > > @@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
> > > >         "PAL",
> > > >  };
> > > >
> > > > +static int drm_mode_parse_cmdline_named_mode(const char *name,
> > > > +                                            unsigned int name_end,
> > > > +                                            struct drm_cmdline_mode *cmdline_mode)
> > > > +{
> > > > +       unsigned int i;
> > > > +
> > > > +       if (!name_end)
> > > > +               return 0;
> > > > +
> > > > +       /* If the name starts with a digit, it's not a named mode */
> > > > +       if (isdigit(name[0]))
> > > > +               return 0;
> > > > +
> > > > +       /*
> > > > +        * If there's an equal sign in the name, the command-line
> > > > +        * contains only an option and no mode.
> > > > +        */
> > > > +       if (strnchr(name, name_end, '='))
> > > > +               return 0;
> > > > +
> > > > +       /* The connection status extras can be set without a mode. */
> > > > +       if (name_end == 1 &&
> > > > +           (name[0] == 'd' || name[0] == 'D' || name[0] == 'e'))
> > > > +               return 0;
> > > > +
> > > > +       /*
> > > > +        * We're sure we're a named mode at this point, iterate over the
> > > > +        * list of modes we're aware of.
> > > > +        */
> > > > +       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > > +               int ret;
> > > > +
> > > > +               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > > +               if (ret != name_end)
> > > > +                       continue;
> > > > +
> > > > +               strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
> > > > +               cmdline_mode->specified = true;
> > > > +
> > > > +               return 1;
> > > > +       }
> > > > +
> > > > +       return -EINVAL;
> > > > +}
> > > > +
> > > >  /**
> > > >   * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> > > >   * @mode_option: optional per connector mode option
> > > > @@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > > >         const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> > > >         const char *options_ptr = NULL;
> > > >         char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> > > > -       int i, len, ret;
> > > > +       int len, ret;
> > > >
> > > >         memset(mode, 0, sizeof(*mode));
> > > >         mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > > > @@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> > > >                 parse_extras = true;
> > > >         }
> > > >
> > > > -       /* First check for a named mode */
> > > > -       for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
> > > > -               ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
> > > > -               if (ret == mode_end) {
> > > > -                       if (refresh_ptr)
> > > > -                               return false; /* named + refresh is invalid */
> > > > +       if (!mode_end)
> > > > +               return false;
> > >
> > > I'm chasing down a change in behaviour between 6.1 and 6.6, and this
> > > patch seems to be at least part of the cause.
> > >
> > > Since [1] we've had the emulated framebuffer on Pi being 16bpp to save
> > > memory. All good.
> > >
> > > It used to be possible to use "video=HDMI-A-1:-32" on the kernel
> > > command line to set it back to 32bpp.
> > >
> > > After this patch that is no longer possible. "mode_end = bpp_off", and
> > > "bpp_off = bpp_ptr - name", so with bpp_ptr = name we get mode_end
> > > being 0. That fails this conditional.
> > > drm_mode_parse_cmdline_named_mode already aborts early but with no
> > > error if name_end / mode_end is 0, so this "if" clause seems
> > > redundant, and is a change in behaviour.
> > >
> > > We do then get a second parsing failure due to the check if (bpp_ptr
> > > || refresh_ptr) at [2].
> > > Prior to this patch my video= line would get mode->specified set via
> > > "if (ret == mode_end)" removed above, as ret = mode_end = 0. We
> > > therefore didn't evaluate the conditional that now fails.
> > >
> > > So I guess my question is whether my command line is valid or not, and
> > > therefore is this a regression?
> >
> > It's a mess :)
> >
> > Documentation/fb/modedb.rst defines the video parameter syntax as:
> >
> > <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
> >
> > And thus mandates the x and y resolution. I guess that's what I use as a
> > base, and thus -bpp alone would be invalid.
> >
> > But then it contradicts itself some time later by documenting that
> > video=HDMI-1:D is ok.
> >
> > I guess what you experienced was just an oversight: it was not
> > documented anywhere that it was valid, so we didn't really tested it
> > either. We should add a unit test for it and fix it.
>
> Does dropping this "if (!mode_end)" check, and at least the check for
> bpp_ptr in the "No mode?" block below it, seem reasonable to you?
>
> I guess there is also the question of whether a refresh rate without a
> mode is valid. That one seems less useful, and all uses of
> refresh_specified appear to be after some form of checking xres and
> yres.
>
> I can put a couple of patches together to deal with this if you're
> happy with the principle.

In looking at this in more detail and writing the unit test, it does
become a bit of a mess.

drm_connector_get_cmdline_mode calls
drm_mode_parse_command_line_for_connector, passing in
connector->cmdline_mode as the mode to fill.
drm_mode_parse_command_line_for_connector fills in bits of the mode as
it goes along, so a failure late in the function leaves bits from the
parsing in connector->cmdline_mode.

My video=HDMI-A-1:-32 does fail later on due to
drm_mode_parse_cmdline_options, but as it had set bpp and
bpp_specified directly in connector->cmdline_mode I got the behaviour
I was desiring.

It feels like this should be an all or nothing thing. Allocate a
struct drm_cmdline_mode on the stack, and only copy it into
connector->cmdline_mode if parsing succeeds. The downside is that you
take out some command line entries that used to work (like mine).
Thoughts?

  Dave

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel