[PATCH AUTOSEL 5.10 01/46] drm/r128: Fix undefined behavior due to shift overflowing the constant

[PATCH AUTOSEL 5.10 01/46] drm/r128: Fix undefined behavior due to shift overflowing the constant

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 6556551f8848f98eff356c8aacae42c8dd65b2df ]

Fix:

  drivers/gpu/drm/r128/r128_cce.c: In function ‘r128_do_init_cce’:
  drivers/gpu/drm/r128/r128_cce.c:417:2: error: case label does not reduce to an integer constant
    case R128_PM4_64BM_64VCBM_64INDBM:
    ^~~~
  drivers/gpu/drm/r128/r128_cce.c:418:2: error: case label does not reduce to an integer constant
    case R128_PM4_64PIO_64VCPIO_64INDPIO:
    ^~~~

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405151517.29753-5-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/r128/r128_drv.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/r128/r128_drv.h b/drivers/gpu/drm/r128/r128_drv.h
index 8b256123cf2b..eb5080615ad4 100644
--- a/drivers/gpu/drm/r128/r128_drv.h
+++ b/drivers/gpu/drm/r128/r128_drv.h
@@ -300,8 +300,8 @@ extern long r128_compat_ioctl(struct file *filp, unsigned int cmd,
 #	define R128_PM4_64PIO_128INDBM		(5  << 28)
 #	define R128_PM4_64BM_128INDBM		(6  << 28)
 #	define R128_PM4_64PIO_64VCBM_64INDBM	(7  << 28)
-#	define R128_PM4_64BM_64VCBM_64INDBM	(8  << 28)
-#	define R128_PM4_64PIO_64VCPIO_64INDPIO	(15 << 28)
+#	define R128_PM4_64BM_64VCBM_64INDBM	(8U  << 28)
+#	define R128_PM4_64PIO_64VCPIO_64INDPIO	(15U << 28)
 #	define R128_PM4_BUFFER_CNTL_NOUPDATE	(1  << 27)
 
 #define R128_PM4_BUFFER_WM_CNTL		0x0708
-- 
2.35.1

[PATCH AUTOSEL 5.10 01/46] drm/r128: Fix undefined behavior due to shift overflowing the constant

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 6556551f8848f98eff356c8aacae42c8dd65b2df ]

Fix:

  drivers/gpu/drm/r128/r128_cce.c: In function ‘r128_do_init_cce’:
  drivers/gpu/drm/r128/r128_cce.c:417:2: error: case label does not reduce to an integer constant
    case R128_PM4_64BM_64VCBM_64INDBM:
    ^~~~
  drivers/gpu/drm/r128/r128_cce.c:418:2: error: case label does not reduce to an integer constant
    case R128_PM4_64PIO_64VCPIO_64INDPIO:
    ^~~~

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405151517.29753-5-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/r128/r128_drv.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/r128/r128_drv.h b/drivers/gpu/drm/r128/r128_drv.h
index 8b256123cf2b..eb5080615ad4 100644
--- a/drivers/gpu/drm/r128/r128_drv.h
+++ b/drivers/gpu/drm/r128/r128_drv.h
@@ -300,8 +300,8 @@ extern long r128_compat_ioctl(struct file *filp, unsigned int cmd,
 #	define R128_PM4_64PIO_128INDBM		(5  << 28)
 #	define R128_PM4_64BM_128INDBM		(6  << 28)
 #	define R128_PM4_64PIO_64VCBM_64INDBM	(7  << 28)
-#	define R128_PM4_64BM_64VCBM_64INDBM	(8  << 28)
-#	define R128_PM4_64PIO_64VCPIO_64INDPIO	(15 << 28)
+#	define R128_PM4_64BM_64VCBM_64INDBM	(8U  << 28)
+#	define R128_PM4_64PIO_64VCPIO_64INDPIO	(15U << 28)
 #	define R128_PM4_BUFFER_CNTL_NOUPDATE	(1  << 27)
 
 #define R128_PM4_BUFFER_WM_CNTL		0x0708
-- 
2.35.1

[PATCH AUTOSEL 5.10 02/46] ath10k: htt_tx: do not interpret Eth frames as WiFi

[Sasha Levin]

From: Sergey Ryazanov <ryazanov.s.a@gmail.com>

[ Upstream commit 70f119fb82af7f7417dc659faf02c91e1f853739 ]

The xmit path for the Ethernet encapsulated frames become more or less
usable since d740d8fd2439 ("ath10k: unify tx mode and dispatch"). This
change reorganize the xmit path in a manageable way to properly support
various tx modes, but misses that the Ethernet encapsulated frame is a
special case. We do not have an IEEE 802.11 header at the begining of
them. But the HTT Tx handler still interprets first bytes of each frame
as an IEEE 802.11 Frame Control field.

Than this code was copied by e62ee5c381c5 ("ath10k: Add support for
htt_data_tx_desc_64 descriptor") and a2097d6444c3 ("ath10k: htt: High
latency TX support") to another handlers. In fact the issue in the high
latency (HL) handler was introduced by 83ac260151e7 ("ath10k: add mic
bytes for pmf management packet").

Ethernet encapsulated frame tx mode stay unused until 75d85fd9993c
("ath10k: introduce basic tdls functionality") started using it for TDLS
frames to avoid key selection issue in some firmwares.

Trying to interpret the begining of an Ethernet encapsulated frame as an
IEEE 802.11 header was not hurt us noticeably since we need to meet two
conditions: (1) xmit should be performed towards a TDLS peer, and (2)
the TDLS peer should have a specific OUI part of its MAC address. Looks
like that the rareness in TDLS communications of OUIs that can be
interpreted as an 802.11 management frame saves users from facing this
issue earlier.

Improve Ethernet tx mode support in the HTT Tx handler by avoiding
interpreting its first bytes as an IEEE 802.11 header. While at it, make
the ieee80211_hdr variable local to the code block that is guarded by
!is_eth check. In this way, we clarify in which cases a frame can be
interpreted as IEEE 802.11, and saves us from similar issues in the
future.

Credits: this change as part of xmit encapsulation offloading support
was originally made by QCA and then submitted for inclusion by John
Crispin [1]. But the whole work was not accepted due to the lack of a
part for 64-bits descriptors [2]. Zhijun You then pointed this out to me
in a reply to my initial RFC patch series. And I made this slightly
reworked version that covered all the HTT Tx handler variants.

1. https://lore.kernel.org/all/20191216092207.31032-1-john@phrozen.org/
2. https://patchwork.kernel.org/project/linux-wireless/patch/20191216092207.31032-1-john@phrozen.org/

Reported-by: Zhijun You <hujy652@gmail.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220516032519.29831-3-ryazanov.s.a@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_tx.c | 61 ++++++++++++++----------
 1 file changed, 35 insertions(+), 26 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index 5f67da47036c..6f0817e1a12a 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -1293,7 +1293,6 @@ static int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txm
 	struct ath10k *ar = htt->ar;
 	int res, data_len;
 	struct htt_cmd_hdr *cmd_hdr;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
 	struct htt_data_tx_desc *tx_desc;
 	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu);
 	struct sk_buff *tmp_skb;
@@ -1304,11 +1303,15 @@ static int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txm
 	u16 flags1 = 0;
 	u16 msdu_id = 0;
 
-	if ((ieee80211_is_action(hdr->frame_control) ||
-	     ieee80211_is_deauth(hdr->frame_control) ||
-	     ieee80211_is_disassoc(hdr->frame_control)) &&
-	     ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+	if (!is_eth) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
+
+		if ((ieee80211_is_action(hdr->frame_control) ||
+		     ieee80211_is_deauth(hdr->frame_control) ||
+		     ieee80211_is_disassoc(hdr->frame_control)) &&
+		     ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		}
 	}
 
 	data_len = msdu->len;
@@ -1405,7 +1408,6 @@ static int ath10k_htt_tx_32(struct ath10k_htt *htt,
 {
 	struct ath10k *ar = htt->ar;
 	struct device *dev = ar->dev;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(msdu);
 	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu);
 	struct ath10k_hif_sg_item sg_items[2];
@@ -1437,15 +1439,19 @@ static int ath10k_htt_tx_32(struct ath10k_htt *htt,
 	txbuf_paddr = htt->txbuf.paddr +
 		      (sizeof(struct ath10k_htt_txbuf_32) * msdu_id);
 
-	if ((ieee80211_is_action(hdr->frame_control) ||
-	     ieee80211_is_deauth(hdr->frame_control) ||
-	     ieee80211_is_disassoc(hdr->frame_control)) &&
-	     ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
-	} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
-		   txmode == ATH10K_HW_TXRX_RAW &&
-		   ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+	if (!is_eth) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
+
+		if ((ieee80211_is_action(hdr->frame_control) ||
+		     ieee80211_is_deauth(hdr->frame_control) ||
+		     ieee80211_is_disassoc(hdr->frame_control)) &&
+		     ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
+			   txmode == ATH10K_HW_TXRX_RAW &&
+			   ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		}
 	}
 
 	skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
@@ -1607,7 +1613,6 @@ static int ath10k_htt_tx_64(struct ath10k_htt *htt,
 {
 	struct ath10k *ar = htt->ar;
 	struct device *dev = ar->dev;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(msdu);
 	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu);
 	struct ath10k_hif_sg_item sg_items[2];
@@ -1639,15 +1644,19 @@ static int ath10k_htt_tx_64(struct ath10k_htt *htt,
 	txbuf_paddr = htt->txbuf.paddr +
 		      (sizeof(struct ath10k_htt_txbuf_64) * msdu_id);
 
-	if ((ieee80211_is_action(hdr->frame_control) ||
-	     ieee80211_is_deauth(hdr->frame_control) ||
-	     ieee80211_is_disassoc(hdr->frame_control)) &&
-	     ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
-	} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
-		   txmode == ATH10K_HW_TXRX_RAW &&
-		   ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+	if (!is_eth) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
+
+		if ((ieee80211_is_action(hdr->frame_control) ||
+		     ieee80211_is_deauth(hdr->frame_control) ||
+		     ieee80211_is_disassoc(hdr->frame_control)) &&
+		     ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
+			   txmode == ATH10K_HW_TXRX_RAW &&
+			   ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		}
 	}
 
 	skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
-- 
2.35.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.10 02/46] ath10k: htt_tx: do not interpret Eth frames as WiFi

[Sasha Levin]

From: Sergey Ryazanov <ryazanov.s.a@gmail.com>

[ Upstream commit 70f119fb82af7f7417dc659faf02c91e1f853739 ]

The xmit path for the Ethernet encapsulated frames become more or less
usable since d740d8fd2439 ("ath10k: unify tx mode and dispatch"). This
change reorganize the xmit path in a manageable way to properly support
various tx modes, but misses that the Ethernet encapsulated frame is a
special case. We do not have an IEEE 802.11 header at the begining of
them. But the HTT Tx handler still interprets first bytes of each frame
as an IEEE 802.11 Frame Control field.

Than this code was copied by e62ee5c381c5 ("ath10k: Add support for
htt_data_tx_desc_64 descriptor") and a2097d6444c3 ("ath10k: htt: High
latency TX support") to another handlers. In fact the issue in the high
latency (HL) handler was introduced by 83ac260151e7 ("ath10k: add mic
bytes for pmf management packet").

Ethernet encapsulated frame tx mode stay unused until 75d85fd9993c
("ath10k: introduce basic tdls functionality") started using it for TDLS
frames to avoid key selection issue in some firmwares.

Trying to interpret the begining of an Ethernet encapsulated frame as an
IEEE 802.11 header was not hurt us noticeably since we need to meet two
conditions: (1) xmit should be performed towards a TDLS peer, and (2)
the TDLS peer should have a specific OUI part of its MAC address. Looks
like that the rareness in TDLS communications of OUIs that can be
interpreted as an 802.11 management frame saves users from facing this
issue earlier.

Improve Ethernet tx mode support in the HTT Tx handler by avoiding
interpreting its first bytes as an IEEE 802.11 header. While at it, make
the ieee80211_hdr variable local to the code block that is guarded by
!is_eth check. In this way, we clarify in which cases a frame can be
interpreted as IEEE 802.11, and saves us from similar issues in the
future.

Credits: this change as part of xmit encapsulation offloading support
was originally made by QCA and then submitted for inclusion by John
Crispin [1]. But the whole work was not accepted due to the lack of a
part for 64-bits descriptors [2]. Zhijun You then pointed this out to me
in a reply to my initial RFC patch series. And I made this slightly
reworked version that covered all the HTT Tx handler variants.

1. https://lore.kernel.org/all/20191216092207.31032-1-john@phrozen.org/
2. https://patchwork.kernel.org/project/linux-wireless/patch/20191216092207.31032-1-john@phrozen.org/

Reported-by: Zhijun You <hujy652@gmail.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220516032519.29831-3-ryazanov.s.a@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_tx.c | 61 ++++++++++++++----------
 1 file changed, 35 insertions(+), 26 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index 5f67da47036c..6f0817e1a12a 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -1293,7 +1293,6 @@ static int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txm
 	struct ath10k *ar = htt->ar;
 	int res, data_len;
 	struct htt_cmd_hdr *cmd_hdr;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
 	struct htt_data_tx_desc *tx_desc;
 	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu);
 	struct sk_buff *tmp_skb;
@@ -1304,11 +1303,15 @@ static int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txm
 	u16 flags1 = 0;
 	u16 msdu_id = 0;
 
-	if ((ieee80211_is_action(hdr->frame_control) ||
-	     ieee80211_is_deauth(hdr->frame_control) ||
-	     ieee80211_is_disassoc(hdr->frame_control)) &&
-	     ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+	if (!is_eth) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
+
+		if ((ieee80211_is_action(hdr->frame_control) ||
+		     ieee80211_is_deauth(hdr->frame_control) ||
+		     ieee80211_is_disassoc(hdr->frame_control)) &&
+		     ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		}
 	}
 
 	data_len = msdu->len;
@@ -1405,7 +1408,6 @@ static int ath10k_htt_tx_32(struct ath10k_htt *htt,
 {
 	struct ath10k *ar = htt->ar;
 	struct device *dev = ar->dev;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(msdu);
 	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu);
 	struct ath10k_hif_sg_item sg_items[2];
@@ -1437,15 +1439,19 @@ static int ath10k_htt_tx_32(struct ath10k_htt *htt,
 	txbuf_paddr = htt->txbuf.paddr +
 		      (sizeof(struct ath10k_htt_txbuf_32) * msdu_id);
 
-	if ((ieee80211_is_action(hdr->frame_control) ||
-	     ieee80211_is_deauth(hdr->frame_control) ||
-	     ieee80211_is_disassoc(hdr->frame_control)) &&
-	     ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
-	} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
-		   txmode == ATH10K_HW_TXRX_RAW &&
-		   ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+	if (!is_eth) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
+
+		if ((ieee80211_is_action(hdr->frame_control) ||
+		     ieee80211_is_deauth(hdr->frame_control) ||
+		     ieee80211_is_disassoc(hdr->frame_control)) &&
+		     ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
+			   txmode == ATH10K_HW_TXRX_RAW &&
+			   ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		}
 	}
 
 	skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
@@ -1607,7 +1613,6 @@ static int ath10k_htt_tx_64(struct ath10k_htt *htt,
 {
 	struct ath10k *ar = htt->ar;
 	struct device *dev = ar->dev;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(msdu);
 	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu);
 	struct ath10k_hif_sg_item sg_items[2];
@@ -1639,15 +1644,19 @@ static int ath10k_htt_tx_64(struct ath10k_htt *htt,
 	txbuf_paddr = htt->txbuf.paddr +
 		      (sizeof(struct ath10k_htt_txbuf_64) * msdu_id);
 
-	if ((ieee80211_is_action(hdr->frame_control) ||
-	     ieee80211_is_deauth(hdr->frame_control) ||
-	     ieee80211_is_disassoc(hdr->frame_control)) &&
-	     ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
-	} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
-		   txmode == ATH10K_HW_TXRX_RAW &&
-		   ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+	if (!is_eth) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
+
+		if ((ieee80211_is_action(hdr->frame_control) ||
+		     ieee80211_is_deauth(hdr->frame_control) ||
+		     ieee80211_is_disassoc(hdr->frame_control)) &&
+		     ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
+			   txmode == ATH10K_HW_TXRX_RAW &&
+			   ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		}
 	}
 
 	skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
-- 
2.35.1

[PATCH AUTOSEL 5.10 03/46] ath10k: fix misreported tx bandwidth for 160Mhz

[Sasha Levin]

From: Maxime Bizon <mbizon@freebox.fr>

[ Upstream commit 75a7062e533e309a9ca0812c69f3ac3cefadb8b1 ]

Because of this missing switch case, 160Mhz transmit was reported as
20Mhz, leading to wrong airtime calculation and AQL limiting max
throughput.

Tested-on: QCA9984 hw2.0 PCI 10.4-3.10-00047

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/cd2735a40da7f4fcc5323e3fca3775e7b5402ece.camel@freebox.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 28ec3c5b4d1f..6d50955d15cf 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -3761,6 +3761,10 @@ ath10k_update_per_peer_tx_stats(struct ath10k *ar,
 		arsta->tx_info.status.rates[0].flags |=
 				IEEE80211_TX_RC_80_MHZ_WIDTH;
 		break;
+	case RATE_INFO_BW_160:
+		arsta->tx_info.status.rates[0].flags |=
+				IEEE80211_TX_RC_160_MHZ_WIDTH;
+		break;
 	}
 
 	if (peer_stats->succ_pkts) {
-- 
2.35.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.10 03/46] ath10k: fix misreported tx bandwidth for 160Mhz

[Sasha Levin]

From: Maxime Bizon <mbizon@freebox.fr>

[ Upstream commit 75a7062e533e309a9ca0812c69f3ac3cefadb8b1 ]

Because of this missing switch case, 160Mhz transmit was reported as
20Mhz, leading to wrong airtime calculation and AQL limiting max
throughput.

Tested-on: QCA9984 hw2.0 PCI 10.4-3.10-00047

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/cd2735a40da7f4fcc5323e3fca3775e7b5402ece.camel@freebox.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 28ec3c5b4d1f..6d50955d15cf 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -3761,6 +3761,10 @@ ath10k_update_per_peer_tx_stats(struct ath10k *ar,
 		arsta->tx_info.status.rates[0].flags |=
 				IEEE80211_TX_RC_80_MHZ_WIDTH;
 		break;
+	case RATE_INFO_BW_160:
+		arsta->tx_info.status.rates[0].flags |=
+				IEEE80211_TX_RC_160_MHZ_WIDTH;
+		break;
 	}
 
 	if (peer_stats->succ_pkts) {
-- 
2.35.1

[Nouveau] [PATCH AUTOSEL 5.10 04/46] drm/nouveau: clear output poll workers before nouveau_fbcon_destroy()

[Sasha Levin]

From: Mark Menzynski <mmenzyns@redhat.com>

[ Upstream commit 6b03816f869529393b37d03e5d75b68f7365a7a4 ]

Resources needed for output poll workers are destroyed in
nouveau_fbcon_fini() before output poll workers are cleared in
nouveau_display_fini(). This means there is a time between fbcon_fini()
and display_fini(), where if output poll happens, it crashes.

This patch introduces another output poll clearing before fbcon
resources are destroyed.

BUG: KASAN: use-after-free in
__drm_fb_helper_initial_config_and_unlock.cold+0x1f3/0x291
[drm_kms_helper]

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220523113541.10562-1-mmenzyns@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_fbcon.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 24ec5339efb4..502f960517fe 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -39,6 +39,7 @@
 
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/drm_probe_helper.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_fourcc.h>
 #include <drm/drm_atomic.h>
@@ -603,6 +604,7 @@ nouveau_fbcon_fini(struct drm_device *dev)
 	if (!drm->fbcon)
 		return;
 
+	drm_kms_helper_poll_fini(dev);
 	nouveau_fbcon_accel_fini(dev);
 	nouveau_fbcon_destroy(dev, drm->fbcon);
 	kfree(drm->fbcon);
-- 
2.35.1

[PATCH AUTOSEL 5.10 04/46] drm/nouveau: clear output poll workers before nouveau_fbcon_destroy()

[Sasha Levin]

From: Mark Menzynski <mmenzyns@redhat.com>

[ Upstream commit 6b03816f869529393b37d03e5d75b68f7365a7a4 ]

Resources needed for output poll workers are destroyed in
nouveau_fbcon_fini() before output poll workers are cleared in
nouveau_display_fini(). This means there is a time between fbcon_fini()
and display_fini(), where if output poll happens, it crashes.

This patch introduces another output poll clearing before fbcon
resources are destroyed.

BUG: KASAN: use-after-free in
__drm_fb_helper_initial_config_and_unlock.cold+0x1f3/0x291
[drm_kms_helper]

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220523113541.10562-1-mmenzyns@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_fbcon.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 24ec5339efb4..502f960517fe 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -39,6 +39,7 @@
 
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/drm_probe_helper.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_fourcc.h>
 #include <drm/drm_atomic.h>
@@ -603,6 +604,7 @@ nouveau_fbcon_fini(struct drm_device *dev)
 	if (!drm->fbcon)
 		return;
 
+	drm_kms_helper_poll_fini(dev);
 	nouveau_fbcon_accel_fini(dev);
 	nouveau_fbcon_destroy(dev, drm->fbcon);
 	kfree(drm->fbcon);
-- 
2.35.1

[PATCH AUTOSEL 5.10 04/46] drm/nouveau: clear output poll workers before nouveau_fbcon_destroy()

[Sasha Levin]

From: Mark Menzynski <mmenzyns@redhat.com>

[ Upstream commit 6b03816f869529393b37d03e5d75b68f7365a7a4 ]

Resources needed for output poll workers are destroyed in
nouveau_fbcon_fini() before output poll workers are cleared in
nouveau_display_fini(). This means there is a time between fbcon_fini()
and display_fini(), where if output poll happens, it crashes.

This patch introduces another output poll clearing before fbcon
resources are destroyed.

BUG: KASAN: use-after-free in
__drm_fb_helper_initial_config_and_unlock.cold+0x1f3/0x291
[drm_kms_helper]

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220523113541.10562-1-mmenzyns@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_fbcon.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 24ec5339efb4..502f960517fe 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -39,6 +39,7 @@
 
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/drm_probe_helper.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_fourcc.h>
 #include <drm/drm_atomic.h>
@@ -603,6 +604,7 @@ nouveau_fbcon_fini(struct drm_device *dev)
 	if (!drm->fbcon)
 		return;
 
+	drm_kms_helper_poll_fini(dev);
 	nouveau_fbcon_accel_fini(dev);
 	nouveau_fbcon_destroy(dev, drm->fbcon);
 	kfree(drm->fbcon);
-- 
2.35.1

[PATCH AUTOSEL 5.10 05/46] drm/panfrost: Handle HW_ISSUE_TTRX_2968_TTRX_3162

[Sasha Levin]

From: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

[ Upstream commit 382435709516c1a7dc3843872792abf95e786c83 ]

Add handling for the HW_ISSUE_TTRX_2968_TTRX_3162 quirk. Logic ported
from kbase. kbase lists this workaround as used on Mali-G57.

Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525145754.25866-3-alyssa.rosenzweig@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panfrost/panfrost_gpu.c    | 3 +++
 drivers/gpu/drm/panfrost/panfrost_issues.h | 3 +++
 drivers/gpu/drm/panfrost/panfrost_regs.h   | 1 +
 3 files changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c b/drivers/gpu/drm/panfrost/panfrost_gpu.c
index 107ad2d764ec..d22bb2589cb1 100644
--- a/drivers/gpu/drm/panfrost/panfrost_gpu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_gpu.c
@@ -108,6 +108,9 @@ static void panfrost_gpu_init_quirks(struct panfrost_device *pfdev)
 			quirks |= SC_LS_ALLOW_ATTR_TYPES;
 	}
 
+	if (panfrost_has_hw_issue(pfdev, HW_ISSUE_TTRX_2968_TTRX_3162))
+		quirks |= SC_VAR_ALGORITHM;
+
 	if (panfrost_has_hw_feature(pfdev, HW_FEATURE_TLS_HASHING))
 		quirks |= SC_TLS_HASH_ENABLE;
 
diff --git a/drivers/gpu/drm/panfrost/panfrost_issues.h b/drivers/gpu/drm/panfrost/panfrost_issues.h
index 8e59d765bf19..3af7d723377e 100644
--- a/drivers/gpu/drm/panfrost/panfrost_issues.h
+++ b/drivers/gpu/drm/panfrost/panfrost_issues.h
@@ -125,6 +125,9 @@ enum panfrost_hw_issue {
 	 * kernel must fiddle with L2 caches to prevent data leakage */
 	HW_ISSUE_TGOX_R1_1234,
 
+	/* Must set SC_VAR_ALGORITHM */
+	HW_ISSUE_TTRX_2968_TTRX_3162,
+
 	HW_ISSUE_END
 };
 
diff --git a/drivers/gpu/drm/panfrost/panfrost_regs.h b/drivers/gpu/drm/panfrost/panfrost_regs.h
index 2ae3a4d301d3..80e5969237c2 100644
--- a/drivers/gpu/drm/panfrost/panfrost_regs.h
+++ b/drivers/gpu/drm/panfrost/panfrost_regs.h
@@ -194,6 +194,7 @@
 #define SC_TLS_HASH_ENABLE		BIT(17)
 #define SC_LS_ATTR_CHECK_DISABLE	BIT(18)
 #define SC_ENABLE_TEXGRD_FLAGS		BIT(25)
+#define SC_VAR_ALGORITHM		BIT(29)
 /* End SHADER_CONFIG register */
 
 /* TILER_CONFIG register */
-- 
2.35.1

[PATCH AUTOSEL 5.10 05/46] drm/panfrost: Handle HW_ISSUE_TTRX_2968_TTRX_3162

[Sasha Levin]

From: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

[ Upstream commit 382435709516c1a7dc3843872792abf95e786c83 ]

Add handling for the HW_ISSUE_TTRX_2968_TTRX_3162 quirk. Logic ported
from kbase. kbase lists this workaround as used on Mali-G57.

Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525145754.25866-3-alyssa.rosenzweig@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panfrost/panfrost_gpu.c    | 3 +++
 drivers/gpu/drm/panfrost/panfrost_issues.h | 3 +++
 drivers/gpu/drm/panfrost/panfrost_regs.h   | 1 +
 3 files changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c b/drivers/gpu/drm/panfrost/panfrost_gpu.c
index 107ad2d764ec..d22bb2589cb1 100644
--- a/drivers/gpu/drm/panfrost/panfrost_gpu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_gpu.c
@@ -108,6 +108,9 @@ static void panfrost_gpu_init_quirks(struct panfrost_device *pfdev)
 			quirks |= SC_LS_ALLOW_ATTR_TYPES;
 	}
 
+	if (panfrost_has_hw_issue(pfdev, HW_ISSUE_TTRX_2968_TTRX_3162))
+		quirks |= SC_VAR_ALGORITHM;
+
 	if (panfrost_has_hw_feature(pfdev, HW_FEATURE_TLS_HASHING))
 		quirks |= SC_TLS_HASH_ENABLE;
 
diff --git a/drivers/gpu/drm/panfrost/panfrost_issues.h b/drivers/gpu/drm/panfrost/panfrost_issues.h
index 8e59d765bf19..3af7d723377e 100644
--- a/drivers/gpu/drm/panfrost/panfrost_issues.h
+++ b/drivers/gpu/drm/panfrost/panfrost_issues.h
@@ -125,6 +125,9 @@ enum panfrost_hw_issue {
 	 * kernel must fiddle with L2 caches to prevent data leakage */
 	HW_ISSUE_TGOX_R1_1234,
 
+	/* Must set SC_VAR_ALGORITHM */
+	HW_ISSUE_TTRX_2968_TTRX_3162,
+
 	HW_ISSUE_END
 };
 
diff --git a/drivers/gpu/drm/panfrost/panfrost_regs.h b/drivers/gpu/drm/panfrost/panfrost_regs.h
index 2ae3a4d301d3..80e5969237c2 100644
--- a/drivers/gpu/drm/panfrost/panfrost_regs.h
+++ b/drivers/gpu/drm/panfrost/panfrost_regs.h
@@ -194,6 +194,7 @@
 #define SC_TLS_HASH_ENABLE		BIT(17)
 #define SC_LS_ATTR_CHECK_DISABLE	BIT(18)
 #define SC_ENABLE_TEXGRD_FLAGS		BIT(25)
+#define SC_VAR_ALGORITHM		BIT(29)
 /* End SHADER_CONFIG register */
 
 /* TILER_CONFIG register */
-- 
2.35.1

Re: [PATCH AUTOSEL 5.10 05/46] drm/panfrost: Handle HW_ISSUE_TTRX_2968_TTRX_3162

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 566 bytes --]

Hi!

> From: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
> 
> [ Upstream commit 382435709516c1a7dc3843872792abf95e786c83 ]
> 
> Add handling for the HW_ISSUE_TTRX_2968_TTRX_3162 quirk. Logic ported
> from kbase. kbase lists this workaround as used on Mali-G57.

AFAICT this quirk is not used anywhere in 5.10, and its users are not
queued. We don't need this in 5.10.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH AUTOSEL 5.10 05/46] drm/panfrost: Handle HW_ISSUE_TTRX_2968_TTRX_3162

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 566 bytes --]

Hi!

> From: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
> 
> [ Upstream commit 382435709516c1a7dc3843872792abf95e786c83 ]
> 
> Add handling for the HW_ISSUE_TTRX_2968_TTRX_3162 quirk. Logic ported
> from kbase. kbase lists this workaround as used on Mali-G57.

AFAICT this quirk is not used anywhere in 5.10, and its users are not
queued. We don't need this in 5.10.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

[PATCH AUTOSEL 5.10 06/46] drm/panfrost: Don't set L2_MMU_CONFIG quirks

[Sasha Levin]

From: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

[ Upstream commit d8e53d8a4e0ae842ef5e83e0dfb0796980f710cf ]

L2_MMU_CONFIG is an implementation-defined register. Different Mali GPUs
define slightly different MAX_READS and MAX_WRITES fields, which
throttle outstanding reads and writes when set to non-zero values. When
left as zero, reads and writes are not throttled.

Both kbase and panfrost always zero these registers. Per discussion with
Steven Price, there are two reasons these quirks may be used:

1. Simulating slower memory subsystems. This use case is only of
   interest to system-on-chip designers; it is not relevant to mainline.

2. Working around broken memory subsystems. Hopefully we never see this
   case in mainline. If we do, we'll need to set this register based on
   an SoC-compatible, rather than generally matching on the GPU model.

To the best of our knowledge, these fields are zero at reset, so the
write is not necessary. Let's remove the write to aid porting to new
Mali GPUs, which have different layouts for the L2_MMU_CONFIG register.

Suggested-by: Steven Price <steven.price@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525145754.25866-8-alyssa.rosenzweig@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panfrost/panfrost_gpu.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c b/drivers/gpu/drm/panfrost/panfrost_gpu.c
index d22bb2589cb1..ce310b4496d8 100644
--- a/drivers/gpu/drm/panfrost/panfrost_gpu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_gpu.c
@@ -127,18 +127,6 @@ static void panfrost_gpu_init_quirks(struct panfrost_device *pfdev)
 	gpu_write(pfdev, GPU_TILER_CONFIG, quirks);
 
 
-	quirks = gpu_read(pfdev, GPU_L2_MMU_CONFIG);
-
-	/* Limit read & write ID width for AXI */
-	if (panfrost_has_hw_feature(pfdev, HW_FEATURE_3BIT_EXT_RW_L2_MMU_CONFIG))
-		quirks &= ~(L2_MMU_CONFIG_3BIT_LIMIT_EXTERNAL_READS |
-			    L2_MMU_CONFIG_3BIT_LIMIT_EXTERNAL_WRITES);
-	else
-		quirks &= ~(L2_MMU_CONFIG_LIMIT_EXTERNAL_READS |
-			    L2_MMU_CONFIG_LIMIT_EXTERNAL_WRITES);
-
-	gpu_write(pfdev, GPU_L2_MMU_CONFIG, quirks);
-
 	quirks = 0;
 	if ((panfrost_model_eq(pfdev, 0x860) || panfrost_model_eq(pfdev, 0x880)) &&
 	    pfdev->features.revision >= 0x2000)
-- 
2.35.1

[PATCH AUTOSEL 5.10 06/46] drm/panfrost: Don't set L2_MMU_CONFIG quirks

[Sasha Levin]

From: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

[ Upstream commit d8e53d8a4e0ae842ef5e83e0dfb0796980f710cf ]

L2_MMU_CONFIG is an implementation-defined register. Different Mali GPUs
define slightly different MAX_READS and MAX_WRITES fields, which
throttle outstanding reads and writes when set to non-zero values. When
left as zero, reads and writes are not throttled.

Both kbase and panfrost always zero these registers. Per discussion with
Steven Price, there are two reasons these quirks may be used:

1. Simulating slower memory subsystems. This use case is only of
   interest to system-on-chip designers; it is not relevant to mainline.

2. Working around broken memory subsystems. Hopefully we never see this
   case in mainline. If we do, we'll need to set this register based on
   an SoC-compatible, rather than generally matching on the GPU model.

To the best of our knowledge, these fields are zero at reset, so the
write is not necessary. Let's remove the write to aid porting to new
Mali GPUs, which have different layouts for the L2_MMU_CONFIG register.

Suggested-by: Steven Price <steven.price@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525145754.25866-8-alyssa.rosenzweig@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panfrost/panfrost_gpu.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c b/drivers/gpu/drm/panfrost/panfrost_gpu.c
index d22bb2589cb1..ce310b4496d8 100644
--- a/drivers/gpu/drm/panfrost/panfrost_gpu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_gpu.c
@@ -127,18 +127,6 @@ static void panfrost_gpu_init_quirks(struct panfrost_device *pfdev)
 	gpu_write(pfdev, GPU_TILER_CONFIG, quirks);
 
 
-	quirks = gpu_read(pfdev, GPU_L2_MMU_CONFIG);
-
-	/* Limit read & write ID width for AXI */
-	if (panfrost_has_hw_feature(pfdev, HW_FEATURE_3BIT_EXT_RW_L2_MMU_CONFIG))
-		quirks &= ~(L2_MMU_CONFIG_3BIT_LIMIT_EXTERNAL_READS |
-			    L2_MMU_CONFIG_3BIT_LIMIT_EXTERNAL_WRITES);
-	else
-		quirks &= ~(L2_MMU_CONFIG_LIMIT_EXTERNAL_READS |
-			    L2_MMU_CONFIG_LIMIT_EXTERNAL_WRITES);
-
-	gpu_write(pfdev, GPU_L2_MMU_CONFIG, quirks);
-
 	quirks = 0;
 	if ((panfrost_model_eq(pfdev, 0x860) || panfrost_model_eq(pfdev, 0x880)) &&
 	    pfdev->features.revision >= 0x2000)
-- 
2.35.1

[PATCH AUTOSEL 5.10 07/46] ath10k: fix regdomain info of iw reg set/get

[Sasha Levin]

From: Wen Gong <quic_wgong@quicinc.com>

[ Upstream commit 8723750e2753868591ba86a57b0041c5e38047ad ]

When wlan load, firmware report the reg code with 0x6C for QCA6174,
it is world reg which checked by ath_is_world_regd(), then the reg
will be save into reg_world_copy of ath_common in ath_regd_init().
Later the regulatory of ath_common is updated to another country
code such as "US" in ath_reg_notifier_apply() by below call stack.
After that, regulatory_hint() is called in ath10k_mac_register()
and it lead "iw reg get" show two regdomain info as below.

global
country US: DFS-FCC
	(2400 - 2472 @ 40), (N/A, 30), (N/A)
	(5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
	(5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
	(5470 - 5730 @ 160), (N/A, 23), (0 ms), DFS
	(5730 - 5850 @ 80), (N/A, 30), (N/A)
	(57240 - 71000 @ 2160), (N/A, 40), (N/A)

phy#0
country US: DFS-FCC
	(2400 - 2472 @ 40), (N/A, 30), (N/A)
	(5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
	(5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
	(5470 - 5730 @ 160), (N/A, 23), (0 ms), DFS
	(5730 - 5850 @ 80), (N/A, 30), (N/A)
	(57240 - 71000 @ 2160), (N/A, 40), (N/A)

[ 4255.704975] Call Trace:
[ 4255.704983]  ath_reg_notifier_apply+0xa6/0xc5 [ath]
[ 4255.704991]  ath10k_reg_notifier+0x2f/0xd2 [ath10k_core]
[ 4255.705010]  wiphy_regulatory_register+0x5f/0x69 [cfg80211]
[ 4255.705020]  wiphy_register+0x459/0x8f0 [cfg80211]
[ 4255.705042]  ? ieee80211_register_hw+0x3a6/0x7d1 [mac80211]
[ 4255.705049]  ? __kmalloc+0xf4/0x218
[ 4255.705058]  ? ieee80211_register_hw+0x3a6/0x7d1 [mac80211]
[ 4255.705066]  ? ath10k_mac_register+0x70/0xaab [ath10k_core]
[ 4255.705075]  ieee80211_register_hw+0x51a/0x7d1 [mac80211]
[ 4255.705084]  ath10k_mac_register+0x8b4/0xaab [ath10k_core]
[ 4255.705094]  ath10k_core_register_work+0xa5e/0xb45 [ath10k_core]
[ 4255.705100]  ? __schedule+0x61f/0x7d3
[ 4255.705105]  process_one_work+0x1b7/0x392
[ 4255.705109]  worker_thread+0x271/0x35d
[ 4255.705112]  ? pr_cont_work+0x58/0x58
[ 4255.705116]  kthread+0x13f/0x147
[ 4255.705119]  ? pr_cont_work+0x58/0x58
[ 4255.705123]  ? kthread_destroy_worker+0x62/0x62
[ 4255.705126]  ret_from_fork+0x22/0x40

At this moment, the two regdomain info is same, when run "iw reg set KR",
the global regdomain info changed to KR, but the regdomain of phy#0
does not change again. It leads inconsistent values between global and
phy#0 as below.

global
country KR: DFS-JP
        (2402 - 2482 @ 40), (N/A, 13), (N/A)
        (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
        (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
        (5490 - 5710 @ 160), (N/A, 30), (0 ms), DFS
        (5735 - 5835 @ 80), (N/A, 30), (N/A)
        (57000 - 66000 @ 2160), (N/A, 43), (N/A)

phy#0
country US: DFS-FCC
	(2400 - 2472 @ 40), (N/A, 30), (N/A)
	(5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
	(5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
	(5470 - 5730 @ 160), (N/A, 23), (0 ms), DFS
	(5730 - 5850 @ 80), (N/A, 30), (N/A)
	(57240 - 71000 @ 2160), (N/A, 40), (N/A)

The initial reg code is 0x6C which saved in reg_world_copy of ath_common,
and the code US is updated from cfg80211 later, so ath10k should also
check the initial reg code before regulatory_hint().

After this fix, regdomain info is same between "iw reg get" and "iw reg
set xx", it does not have the regdomain info of phy#0 again.

global
country KR: DFS-JP
        (2402 - 2482 @ 40), (N/A, 13), (N/A)
        (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
        (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
        (5490 - 5710 @ 160), (N/A, 30), (0 ms), DFS
        (5735 - 5835 @ 80), (N/A, 30), (N/A)
        (57000 - 66000 @ 2160), (N/A, 43), (N/A)

This does not effect the channel list and power which ath10k used.
When the country code for regulatory_hint() in ath10k_mac_register()
is same with the global country code, then reg_set_rd_driver() of
cfg80211 called from crda which return -EALREADY to set_regdom() and
then update_all_wiphy_regulatory() will not be called while wlan load.
When run "iw reg set xx", reg_get_regdomain() which used by function
handle_channel() in net/wirelss/reg.c always use the regdomain
returned by get_cfg80211_regdom() because the initiator of last
regulatory_request is NL80211_REGDOM_SET_BY_USER, get_cfg80211_regdom()
is the global regdomain, then all the ieee80211_channel info is updated
in handle_channel() with the global regdomain.

Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Tested-on: QCA9984 hw1.0 PCI 10.4-3.6-00104

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220525132247.23459-1-quic_wgong@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b61cd275fbda..a2868f6c7861 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -10108,7 +10108,8 @@ int ath10k_mac_register(struct ath10k *ar)
 		ar->hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
 	}
 
-	if (!ath_is_world_regd(&ar->ath_common.regulatory)) {
+	if (!ath_is_world_regd(&ar->ath_common.reg_world_copy) &&
+	    !ath_is_world_regd(&ar->ath_common.regulatory)) {
 		ret = regulatory_hint(ar->hw->wiphy,
 				      ar->ath_common.regulatory.alpha2);
 		if (ret)
-- 
2.35.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.10 07/46] ath10k: fix regdomain info of iw reg set/get

[Sasha Levin]

From: Wen Gong <quic_wgong@quicinc.com>

[ Upstream commit 8723750e2753868591ba86a57b0041c5e38047ad ]

When wlan load, firmware report the reg code with 0x6C for QCA6174,
it is world reg which checked by ath_is_world_regd(), then the reg
will be save into reg_world_copy of ath_common in ath_regd_init().
Later the regulatory of ath_common is updated to another country
code such as "US" in ath_reg_notifier_apply() by below call stack.
After that, regulatory_hint() is called in ath10k_mac_register()
and it lead "iw reg get" show two regdomain info as below.

global
country US: DFS-FCC
	(2400 - 2472 @ 40), (N/A, 30), (N/A)
	(5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
	(5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
	(5470 - 5730 @ 160), (N/A, 23), (0 ms), DFS
	(5730 - 5850 @ 80), (N/A, 30), (N/A)
	(57240 - 71000 @ 2160), (N/A, 40), (N/A)

phy#0
country US: DFS-FCC
	(2400 - 2472 @ 40), (N/A, 30), (N/A)
	(5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
	(5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
	(5470 - 5730 @ 160), (N/A, 23), (0 ms), DFS
	(5730 - 5850 @ 80), (N/A, 30), (N/A)
	(57240 - 71000 @ 2160), (N/A, 40), (N/A)

[ 4255.704975] Call Trace:
[ 4255.704983]  ath_reg_notifier_apply+0xa6/0xc5 [ath]
[ 4255.704991]  ath10k_reg_notifier+0x2f/0xd2 [ath10k_core]
[ 4255.705010]  wiphy_regulatory_register+0x5f/0x69 [cfg80211]
[ 4255.705020]  wiphy_register+0x459/0x8f0 [cfg80211]
[ 4255.705042]  ? ieee80211_register_hw+0x3a6/0x7d1 [mac80211]
[ 4255.705049]  ? __kmalloc+0xf4/0x218
[ 4255.705058]  ? ieee80211_register_hw+0x3a6/0x7d1 [mac80211]
[ 4255.705066]  ? ath10k_mac_register+0x70/0xaab [ath10k_core]
[ 4255.705075]  ieee80211_register_hw+0x51a/0x7d1 [mac80211]
[ 4255.705084]  ath10k_mac_register+0x8b4/0xaab [ath10k_core]
[ 4255.705094]  ath10k_core_register_work+0xa5e/0xb45 [ath10k_core]
[ 4255.705100]  ? __schedule+0x61f/0x7d3
[ 4255.705105]  process_one_work+0x1b7/0x392
[ 4255.705109]  worker_thread+0x271/0x35d
[ 4255.705112]  ? pr_cont_work+0x58/0x58
[ 4255.705116]  kthread+0x13f/0x147
[ 4255.705119]  ? pr_cont_work+0x58/0x58
[ 4255.705123]  ? kthread_destroy_worker+0x62/0x62
[ 4255.705126]  ret_from_fork+0x22/0x40

At this moment, the two regdomain info is same, when run "iw reg set KR",
the global regdomain info changed to KR, but the regdomain of phy#0
does not change again. It leads inconsistent values between global and
phy#0 as below.

global
country KR: DFS-JP
        (2402 - 2482 @ 40), (N/A, 13), (N/A)
        (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
        (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
        (5490 - 5710 @ 160), (N/A, 30), (0 ms), DFS
        (5735 - 5835 @ 80), (N/A, 30), (N/A)
        (57000 - 66000 @ 2160), (N/A, 43), (N/A)

phy#0
country US: DFS-FCC
	(2400 - 2472 @ 40), (N/A, 30), (N/A)
	(5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
	(5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
	(5470 - 5730 @ 160), (N/A, 23), (0 ms), DFS
	(5730 - 5850 @ 80), (N/A, 30), (N/A)
	(57240 - 71000 @ 2160), (N/A, 40), (N/A)

The initial reg code is 0x6C which saved in reg_world_copy of ath_common,
and the code US is updated from cfg80211 later, so ath10k should also
check the initial reg code before regulatory_hint().

After this fix, regdomain info is same between "iw reg get" and "iw reg
set xx", it does not have the regdomain info of phy#0 again.

global
country KR: DFS-JP
        (2402 - 2482 @ 40), (N/A, 13), (N/A)
        (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
        (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
        (5490 - 5710 @ 160), (N/A, 30), (0 ms), DFS
        (5735 - 5835 @ 80), (N/A, 30), (N/A)
        (57000 - 66000 @ 2160), (N/A, 43), (N/A)

This does not effect the channel list and power which ath10k used.
When the country code for regulatory_hint() in ath10k_mac_register()
is same with the global country code, then reg_set_rd_driver() of
cfg80211 called from crda which return -EALREADY to set_regdom() and
then update_all_wiphy_regulatory() will not be called while wlan load.
When run "iw reg set xx", reg_get_regdomain() which used by function
handle_channel() in net/wirelss/reg.c always use the regdomain
returned by get_cfg80211_regdom() because the initiator of last
regulatory_request is NL80211_REGDOM_SET_BY_USER, get_cfg80211_regdom()
is the global regdomain, then all the ieee80211_channel info is updated
in handle_channel() with the global regdomain.

Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Tested-on: QCA9984 hw1.0 PCI 10.4-3.6-00104

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220525132247.23459-1-quic_wgong@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b61cd275fbda..a2868f6c7861 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -10108,7 +10108,8 @@ int ath10k_mac_register(struct ath10k *ar)
 		ar->hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
 	}
 
-	if (!ath_is_world_regd(&ar->ath_common.regulatory)) {
+	if (!ath_is_world_regd(&ar->ath_common.reg_world_copy) &&
+	    !ath_is_world_regd(&ar->ath_common.regulatory)) {
 		ret = regulatory_hint(ar->hw->wiphy,
 				      ar->ath_common.regulatory.alpha2);
 		if (ret)
-- 
2.35.1

[PATCH AUTOSEL 5.10 08/46] drm/amd/display: Detect dpcd_rev when hotplug mst monitor

[Sasha Levin]

From: Wayne Lin <Wayne.Lin@amd.com>

[ Upstream commit 453b0016a054df0f442fda8a145b97a33816cab9 ]

[Why]
Once mst topology is constructed, later on new connected monitors
are reported to source by CSN message. Within CSN, there is no
carried info of DPCD_REV comparing to LINK_ADDRESS reply. As the
result, we might leave some ports connected to DP but without DPCD
revision number which will affect us determining the capability of
the DP Rx.

[How]
Send out remote DPCD read when the port's dpcd_rev is 0x0 in
detect_ctx(). Firstly, read out the value from DPCD 0x2200. If the
return value is 0x0, it's likely the DP1.2 DP Rx then we reques
revision from DPCD 0x0 again.

Reviewed-by: Hersen Wu <hersenwu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../display/amdgpu_dm/amdgpu_dm_mst_types.c   | 38 ++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index d617e98afb76..c6418462ecb0 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -279,12 +279,48 @@ dm_dp_mst_detect(struct drm_connector *connector,
 {
 	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
 	struct amdgpu_dm_connector *master = aconnector->mst_port;
+	struct drm_dp_mst_port *port = aconnector->port;
+	int connection_status;
 
 	if (drm_connector_is_unregistered(connector))
 		return connector_status_disconnected;
 
-	return drm_dp_mst_detect_port(connector, ctx, &master->mst_mgr,
+	connection_status = drm_dp_mst_detect_port(connector, ctx, &master->mst_mgr,
 				      aconnector->port);
+
+	if (port->pdt != DP_PEER_DEVICE_NONE && !port->dpcd_rev) {
+		uint8_t dpcd_rev;
+		int ret;
+
+		ret = drm_dp_dpcd_readb(&port->aux, DP_DP13_DPCD_REV, &dpcd_rev);
+
+		if (ret == 1) {
+			port->dpcd_rev = dpcd_rev;
+
+			/* Could be DP1.2 DP Rx case*/
+			if (!dpcd_rev) {
+				ret = drm_dp_dpcd_readb(&port->aux, DP_DPCD_REV, &dpcd_rev);
+
+				if (ret == 1)
+					port->dpcd_rev = dpcd_rev;
+			}
+
+			if (!dpcd_rev)
+				DRM_DEBUG_KMS("Can't decide DPCD revision number!");
+		}
+
+		/*
+		 * Could be legacy sink, logical port etc on DP1.2.
+		 * Will get Nack under these cases when issue remote
+		 * DPCD read.
+		 */
+		if (ret != 1)
+			DRM_DEBUG_KMS("Can't access DPCD");
+	} else if (port->pdt == DP_PEER_DEVICE_NONE) {
+		port->dpcd_rev = 0;
+	}
+
+	return connection_status;
 }
 
 static int dm_dp_mst_atomic_check(struct drm_connector *connector,
-- 
2.35.1

[PATCH AUTOSEL 5.10 08/46] drm/amd/display: Detect dpcd_rev when hotplug mst monitor

[Sasha Levin]

From: Wayne Lin <Wayne.Lin@amd.com>

[ Upstream commit 453b0016a054df0f442fda8a145b97a33816cab9 ]

[Why]
Once mst topology is constructed, later on new connected monitors
are reported to source by CSN message. Within CSN, there is no
carried info of DPCD_REV comparing to LINK_ADDRESS reply. As the
result, we might leave some ports connected to DP but without DPCD
revision number which will affect us determining the capability of
the DP Rx.

[How]
Send out remote DPCD read when the port's dpcd_rev is 0x0 in
detect_ctx(). Firstly, read out the value from DPCD 0x2200. If the
return value is 0x0, it's likely the DP1.2 DP Rx then we reques
revision from DPCD 0x0 again.

Reviewed-by: Hersen Wu <hersenwu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../display/amdgpu_dm/amdgpu_dm_mst_types.c   | 38 ++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index d617e98afb76..c6418462ecb0 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -279,12 +279,48 @@ dm_dp_mst_detect(struct drm_connector *connector,
 {
 	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
 	struct amdgpu_dm_connector *master = aconnector->mst_port;
+	struct drm_dp_mst_port *port = aconnector->port;
+	int connection_status;
 
 	if (drm_connector_is_unregistered(connector))
 		return connector_status_disconnected;
 
-	return drm_dp_mst_detect_port(connector, ctx, &master->mst_mgr,
+	connection_status = drm_dp_mst_detect_port(connector, ctx, &master->mst_mgr,
 				      aconnector->port);
+
+	if (port->pdt != DP_PEER_DEVICE_NONE && !port->dpcd_rev) {
+		uint8_t dpcd_rev;
+		int ret;
+
+		ret = drm_dp_dpcd_readb(&port->aux, DP_DP13_DPCD_REV, &dpcd_rev);
+
+		if (ret == 1) {
+			port->dpcd_rev = dpcd_rev;
+
+			/* Could be DP1.2 DP Rx case*/
+			if (!dpcd_rev) {
+				ret = drm_dp_dpcd_readb(&port->aux, DP_DPCD_REV, &dpcd_rev);
+
+				if (ret == 1)
+					port->dpcd_rev = dpcd_rev;
+			}
+
+			if (!dpcd_rev)
+				DRM_DEBUG_KMS("Can't decide DPCD revision number!");
+		}
+
+		/*
+		 * Could be legacy sink, logical port etc on DP1.2.
+		 * Will get Nack under these cases when issue remote
+		 * DPCD read.
+		 */
+		if (ret != 1)
+			DRM_DEBUG_KMS("Can't access DPCD");
+	} else if (port->pdt == DP_PEER_DEVICE_NONE) {
+		port->dpcd_rev = 0;
+	}
+
+	return connection_status;
 }
 
 static int dm_dp_mst_atomic_check(struct drm_connector *connector,
-- 
2.35.1

[PATCH AUTOSEL 5.10 08/46] drm/amd/display: Detect dpcd_rev when hotplug mst monitor

[Sasha Levin]

From: Wayne Lin <Wayne.Lin@amd.com>

[ Upstream commit 453b0016a054df0f442fda8a145b97a33816cab9 ]

[Why]
Once mst topology is constructed, later on new connected monitors
are reported to source by CSN message. Within CSN, there is no
carried info of DPCD_REV comparing to LINK_ADDRESS reply. As the
result, we might leave some ports connected to DP but without DPCD
revision number which will affect us determining the capability of
the DP Rx.

[How]
Send out remote DPCD read when the port's dpcd_rev is 0x0 in
detect_ctx(). Firstly, read out the value from DPCD 0x2200. If the
return value is 0x0, it's likely the DP1.2 DP Rx then we reques
revision from DPCD 0x0 again.

Reviewed-by: Hersen Wu <hersenwu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../display/amdgpu_dm/amdgpu_dm_mst_types.c   | 38 ++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index d617e98afb76..c6418462ecb0 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -279,12 +279,48 @@ dm_dp_mst_detect(struct drm_connector *connector,
 {
 	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
 	struct amdgpu_dm_connector *master = aconnector->mst_port;
+	struct drm_dp_mst_port *port = aconnector->port;
+	int connection_status;
 
 	if (drm_connector_is_unregistered(connector))
 		return connector_status_disconnected;
 
-	return drm_dp_mst_detect_port(connector, ctx, &master->mst_mgr,
+	connection_status = drm_dp_mst_detect_port(connector, ctx, &master->mst_mgr,
 				      aconnector->port);
+
+	if (port->pdt != DP_PEER_DEVICE_NONE && !port->dpcd_rev) {
+		uint8_t dpcd_rev;
+		int ret;
+
+		ret = drm_dp_dpcd_readb(&port->aux, DP_DP13_DPCD_REV, &dpcd_rev);
+
+		if (ret == 1) {
+			port->dpcd_rev = dpcd_rev;
+
+			/* Could be DP1.2 DP Rx case*/
+			if (!dpcd_rev) {
+				ret = drm_dp_dpcd_readb(&port->aux, DP_DPCD_REV, &dpcd_rev);
+
+				if (ret == 1)
+					port->dpcd_rev = dpcd_rev;
+			}
+
+			if (!dpcd_rev)
+				DRM_DEBUG_KMS("Can't decide DPCD revision number!");
+		}
+
+		/*
+		 * Could be legacy sink, logical port etc on DP1.2.
+		 * Will get Nack under these cases when issue remote
+		 * DPCD read.
+		 */
+		if (ret != 1)
+			DRM_DEBUG_KMS("Can't access DPCD");
+	} else if (port->pdt == DP_PEER_DEVICE_NONE) {
+		port->dpcd_rev = 0;
+	}
+
+	return connection_status;
 }
 
 static int dm_dp_mst_atomic_check(struct drm_connector *connector,
-- 
2.35.1

[PATCH AUTOSEL 5.10 09/46] drm/amd/display: Fix dpp dto for disabled pipes

[Sasha Levin]

From: Duncan Ma <duncan.ma@amd.com>

[ Upstream commit d4965c53b95d7533dfc2309d2fc25838bd33220e ]

[Why]
When switching from 1 pipe to 4to1 mpc combine,
DppDtoClk aren't enabled for the disabled pipes
pior to programming the pipes. Upon optimizing
bandwidth, DppDto are enabled causing intermittent
underflow.

[How]
Update dppclk dto whenever pipe are flagged to
enable.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 3d778760a3b5..7289752d44ad 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -1376,11 +1376,15 @@ static void dcn20_update_dchubp_dpp(
 	struct hubp *hubp = pipe_ctx->plane_res.hubp;
 	struct dpp *dpp = pipe_ctx->plane_res.dpp;
 	struct dc_plane_state *plane_state = pipe_ctx->plane_state;
+	struct dccg *dccg = dc->res_pool->dccg;
 	bool viewport_changed = false;
 
 	if (pipe_ctx->update_flags.bits.dppclk)
 		dpp->funcs->dpp_dppclk_control(dpp, false, true);
 
+	if (pipe_ctx->update_flags.bits.enable)
+		dccg->funcs->update_dpp_dto(dccg, dpp->inst, pipe_ctx->plane_res.bw.dppclk_khz);
+
 	/* TODO: Need input parameter to tell current DCHUB pipe tie to which OTG
 	 * VTG is within DCHUBBUB which is commond block share by each pipe HUBP.
 	 * VTG is 1:1 mapping with OTG. Each pipe HUBP will select which VTG
-- 
2.35.1

[PATCH AUTOSEL 5.10 09/46] drm/amd/display: Fix dpp dto for disabled pipes

[Sasha Levin]

From: Duncan Ma <duncan.ma@amd.com>

[ Upstream commit d4965c53b95d7533dfc2309d2fc25838bd33220e ]

[Why]
When switching from 1 pipe to 4to1 mpc combine,
DppDtoClk aren't enabled for the disabled pipes
pior to programming the pipes. Upon optimizing
bandwidth, DppDto are enabled causing intermittent
underflow.

[How]
Update dppclk dto whenever pipe are flagged to
enable.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 3d778760a3b5..7289752d44ad 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -1376,11 +1376,15 @@ static void dcn20_update_dchubp_dpp(
 	struct hubp *hubp = pipe_ctx->plane_res.hubp;
 	struct dpp *dpp = pipe_ctx->plane_res.dpp;
 	struct dc_plane_state *plane_state = pipe_ctx->plane_state;
+	struct dccg *dccg = dc->res_pool->dccg;
 	bool viewport_changed = false;
 
 	if (pipe_ctx->update_flags.bits.dppclk)
 		dpp->funcs->dpp_dppclk_control(dpp, false, true);
 
+	if (pipe_ctx->update_flags.bits.enable)
+		dccg->funcs->update_dpp_dto(dccg, dpp->inst, pipe_ctx->plane_res.bw.dppclk_khz);
+
 	/* TODO: Need input parameter to tell current DCHUB pipe tie to which OTG
 	 * VTG is within DCHUBBUB which is commond block share by each pipe HUBP.
 	 * VTG is 1:1 mapping with OTG. Each pipe HUBP will select which VTG
-- 
2.35.1

[PATCH AUTOSEL 5.10 09/46] drm/amd/display: Fix dpp dto for disabled pipes

[Sasha Levin]

From: Duncan Ma <duncan.ma@amd.com>

[ Upstream commit d4965c53b95d7533dfc2309d2fc25838bd33220e ]

[Why]
When switching from 1 pipe to 4to1 mpc combine,
DppDtoClk aren't enabled for the disabled pipes
pior to programming the pipes. Upon optimizing
bandwidth, DppDto are enabled causing intermittent
underflow.

[How]
Update dppclk dto whenever pipe are flagged to
enable.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 3d778760a3b5..7289752d44ad 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -1376,11 +1376,15 @@ static void dcn20_update_dchubp_dpp(
 	struct hubp *hubp = pipe_ctx->plane_res.hubp;
 	struct dpp *dpp = pipe_ctx->plane_res.dpp;
 	struct dc_plane_state *plane_state = pipe_ctx->plane_state;
+	struct dccg *dccg = dc->res_pool->dccg;
 	bool viewport_changed = false;
 
 	if (pipe_ctx->update_flags.bits.dppclk)
 		dpp->funcs->dpp_dppclk_control(dpp, false, true);
 
+	if (pipe_ctx->update_flags.bits.enable)
+		dccg->funcs->update_dpp_dto(dccg, dpp->inst, pipe_ctx->plane_res.bw.dppclk_khz);
+
 	/* TODO: Need input parameter to tell current DCHUB pipe tie to which OTG
 	 * VTG is within DCHUBBUB which is commond block share by each pipe HUBP.
 	 * VTG is 1:1 mapping with OTG. Each pipe HUBP will select which VTG
-- 
2.35.1

[PATCH AUTOSEL 5.10 10/46] drm/radeon: integer overflow in radeon_mode_dumb_create()

[Sasha Levin]

From: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>

[ Upstream commit feb54650bae25f2a2adfc493e3e254e7c27a3fba ]

Similar to the handling of amdgpu_mode_dumb_create in commit 54ef0b5461c0
("drm/amdgpu: integer overflow in amdgpu_mode_dumb_create()"),
we thought a patch might be needed here as well.

args->size is a u64.  arg->pitch and args->height are u32.  The
multiplication will overflow instead of using the high 32 bits as
intended.

Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_gem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index e5c4271e64ed..ac56d1dec214 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -758,7 +758,7 @@ int radeon_mode_dumb_create(struct drm_file *file_priv,
 
 	args->pitch = radeon_align_pitch(rdev, args->width,
 					 DIV_ROUND_UP(args->bpp, 8), 0);
-	args->size = args->pitch * args->height;
+	args->size = (u64)args->pitch * args->height;
 	args->size = ALIGN(args->size, PAGE_SIZE);
 
 	r = radeon_gem_object_create(rdev, args->size, 0,
-- 
2.35.1

[PATCH AUTOSEL 5.10 10/46] drm/radeon: integer overflow in radeon_mode_dumb_create()

[Sasha Levin]

From: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>

[ Upstream commit feb54650bae25f2a2adfc493e3e254e7c27a3fba ]

Similar to the handling of amdgpu_mode_dumb_create in commit 54ef0b5461c0
("drm/amdgpu: integer overflow in amdgpu_mode_dumb_create()"),
we thought a patch might be needed here as well.

args->size is a u64.  arg->pitch and args->height are u32.  The
multiplication will overflow instead of using the high 32 bits as
intended.

Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_gem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index e5c4271e64ed..ac56d1dec214 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -758,7 +758,7 @@ int radeon_mode_dumb_create(struct drm_file *file_priv,
 
 	args->pitch = radeon_align_pitch(rdev, args->width,
 					 DIV_ROUND_UP(args->bpp, 8), 0);
-	args->size = args->pitch * args->height;
+	args->size = (u64)args->pitch * args->height;
 	args->size = ALIGN(args->size, PAGE_SIZE);
 
 	r = radeon_gem_object_create(rdev, args->size, 0,
-- 
2.35.1

[PATCH AUTOSEL 5.10 10/46] drm/radeon: integer overflow in radeon_mode_dumb_create()

[Sasha Levin]

From: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>

[ Upstream commit feb54650bae25f2a2adfc493e3e254e7c27a3fba ]

Similar to the handling of amdgpu_mode_dumb_create in commit 54ef0b5461c0
("drm/amdgpu: integer overflow in amdgpu_mode_dumb_create()"),
we thought a patch might be needed here as well.

args->size is a u64.  arg->pitch and args->height are u32.  The
multiplication will overflow instead of using the high 32 bits as
intended.

Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_gem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index e5c4271e64ed..ac56d1dec214 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -758,7 +758,7 @@ int radeon_mode_dumb_create(struct drm_file *file_priv,
 
 	args->pitch = radeon_align_pitch(rdev, args->width,
 					 DIV_ROUND_UP(args->bpp, 8), 0);
-	args->size = args->pitch * args->height;
+	args->size = (u64)args->pitch * args->height;
 	args->size = ALIGN(args->size, PAGE_SIZE);
 
 	r = radeon_gem_object_create(rdev, args->size, 0,
-- 
2.35.1

[PATCH AUTOSEL 5.10 11/46] drm/radeon: Initialize fences array entries in radeon_sa_bo_next_hole

[Sasha Levin]

From: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>

[ Upstream commit 0381ac3ca2e727d4dfb7264d9416a8ba6bb6c18b ]

Similar to the handling of amdgpu_sa_bo_next_hole in commit 6a15f3ff19a8
("drm/amdgpu: Initialize fences array entries in amdgpu_sa_bo_next_hole"),
we thought a patch might be needed here as well.

The entries were only initialized once in radeon_sa_bo_new. If a fence
wasn't signalled yet in the first radeon_sa_bo_next_hole call, but then
got signalled before a later radeon_sa_bo_next_hole call, it could
destroy the fence but leave its pointer in the array, resulting in
use-after-free in radeon_sa_bo_new.

Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_sa.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_sa.c b/drivers/gpu/drm/radeon/radeon_sa.c
index 310c322c7112..0981948bd9ed 100644
--- a/drivers/gpu/drm/radeon/radeon_sa.c
+++ b/drivers/gpu/drm/radeon/radeon_sa.c
@@ -267,6 +267,8 @@ static bool radeon_sa_bo_next_hole(struct radeon_sa_manager *sa_manager,
 	for (i = 0; i < RADEON_NUM_RINGS; ++i) {
 		struct radeon_sa_bo *sa_bo;
 
+		fences[i] = NULL;
+
 		if (list_empty(&sa_manager->flist[i])) {
 			continue;
 		}
@@ -332,10 +334,8 @@ int radeon_sa_bo_new(struct radeon_device *rdev,
 
 	spin_lock(&sa_manager->wq.lock);
 	do {
-		for (i = 0; i < RADEON_NUM_RINGS; ++i) {
-			fences[i] = NULL;
+		for (i = 0; i < RADEON_NUM_RINGS; ++i)
 			tries[i] = 0;
-		}
 
 		do {
 			radeon_sa_bo_try_free(sa_manager);
-- 
2.35.1

[PATCH AUTOSEL 5.10 11/46] drm/radeon: Initialize fences array entries in radeon_sa_bo_next_hole

[Sasha Levin]

From: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>

[ Upstream commit 0381ac3ca2e727d4dfb7264d9416a8ba6bb6c18b ]

Similar to the handling of amdgpu_sa_bo_next_hole in commit 6a15f3ff19a8
("drm/amdgpu: Initialize fences array entries in amdgpu_sa_bo_next_hole"),
we thought a patch might be needed here as well.

The entries were only initialized once in radeon_sa_bo_new. If a fence
wasn't signalled yet in the first radeon_sa_bo_next_hole call, but then
got signalled before a later radeon_sa_bo_next_hole call, it could
destroy the fence but leave its pointer in the array, resulting in
use-after-free in radeon_sa_bo_new.

Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_sa.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_sa.c b/drivers/gpu/drm/radeon/radeon_sa.c
index 310c322c7112..0981948bd9ed 100644
--- a/drivers/gpu/drm/radeon/radeon_sa.c
+++ b/drivers/gpu/drm/radeon/radeon_sa.c
@@ -267,6 +267,8 @@ static bool radeon_sa_bo_next_hole(struct radeon_sa_manager *sa_manager,
 	for (i = 0; i < RADEON_NUM_RINGS; ++i) {
 		struct radeon_sa_bo *sa_bo;
 
+		fences[i] = NULL;
+
 		if (list_empty(&sa_manager->flist[i])) {
 			continue;
 		}
@@ -332,10 +334,8 @@ int radeon_sa_bo_new(struct radeon_device *rdev,
 
 	spin_lock(&sa_manager->wq.lock);
 	do {
-		for (i = 0; i < RADEON_NUM_RINGS; ++i) {
-			fences[i] = NULL;
+		for (i = 0; i < RADEON_NUM_RINGS; ++i)
 			tries[i] = 0;
-		}
 
 		do {
 			radeon_sa_bo_try_free(sa_manager);
-- 
2.35.1

[PATCH AUTOSEL 5.10 11/46] drm/radeon: Initialize fences array entries in radeon_sa_bo_next_hole

[Sasha Levin]

From: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>

[ Upstream commit 0381ac3ca2e727d4dfb7264d9416a8ba6bb6c18b ]

Similar to the handling of amdgpu_sa_bo_next_hole in commit 6a15f3ff19a8
("drm/amdgpu: Initialize fences array entries in amdgpu_sa_bo_next_hole"),
we thought a patch might be needed here as well.

The entries were only initialized once in radeon_sa_bo_new. If a fence
wasn't signalled yet in the first radeon_sa_bo_next_hole call, but then
got signalled before a later radeon_sa_bo_next_hole call, it could
destroy the fence but leave its pointer in the array, resulting in
use-after-free in radeon_sa_bo_new.

Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_sa.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_sa.c b/drivers/gpu/drm/radeon/radeon_sa.c
index 310c322c7112..0981948bd9ed 100644
--- a/drivers/gpu/drm/radeon/radeon_sa.c
+++ b/drivers/gpu/drm/radeon/radeon_sa.c
@@ -267,6 +267,8 @@ static bool radeon_sa_bo_next_hole(struct radeon_sa_manager *sa_manager,
 	for (i = 0; i < RADEON_NUM_RINGS; ++i) {
 		struct radeon_sa_bo *sa_bo;
 
+		fences[i] = NULL;
+
 		if (list_empty(&sa_manager->flist[i])) {
 			continue;
 		}
@@ -332,10 +334,8 @@ int radeon_sa_bo_new(struct radeon_device *rdev,
 
 	spin_lock(&sa_manager->wq.lock);
 	do {
-		for (i = 0; i < RADEON_NUM_RINGS; ++i) {
-			fences[i] = NULL;
+		for (i = 0; i < RADEON_NUM_RINGS; ++i)
 			tries[i] = 0;
-		}
 
 		do {
 			radeon_sa_bo_try_free(sa_manager);
-- 
2.35.1

[PATCH AUTOSEL 5.10 12/46] udmabuf: Set the DMA mask for the udmabuf device (v2)

[Sasha Levin]

From: Vivek Kasireddy <vivek.kasireddy@intel.com>

[ Upstream commit 9e9fa6a9198b767b00f48160800128e83a038f9f ]

If the DMA mask is not set explicitly, the following warning occurs
when the userspace tries to access the dma-buf via the CPU as
reported by syzbot here:

WARNING: CPU: 1 PID: 3595 at kernel/dma/mapping.c:188
__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188
Modules linked in:
CPU: 0 PID: 3595 Comm: syz-executor249 Not tainted
5.17.0-rc2-syzkaller-00316-g0457e5153e0e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188
Code: 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 75 71 4c 8b 3d c0
83 b5 0d e9 db fe ff ff e8 b6 0f 13 00 0f 0b e8 af 0f 13 00 <0f> 0b 45
   31 e4 e9 54 ff ff ff e8 a0 0f 13 00 49 8d 7f 50 48 b8 00
RSP: 0018:ffffc90002a07d68 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88807e25e2c0 RSI: ffffffff81649e91 RDI: ffff88801b848408
RBP: ffff88801b848000 R08: 0000000000000002 R09: ffff88801d86c74f
R10: ffffffff81649d72 R11: 0000000000000001 R12: 0000000000000002
R13: ffff88801d86c680 R14: 0000000000000001 R15: 0000000000000000
FS:  0000555556e30300(0000) GS:ffff8880b9d00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200000cc CR3: 000000001d74a000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 dma_map_sgtable+0x70/0xf0 kernel/dma/mapping.c:264
 get_sg_table.isra.0+0xe0/0x160 drivers/dma-buf/udmabuf.c:72
 begin_cpu_udmabuf+0x130/0x1d0 drivers/dma-buf/udmabuf.c:126
 dma_buf_begin_cpu_access+0xfd/0x1d0 drivers/dma-buf/dma-buf.c:1164
 dma_buf_ioctl+0x259/0x2b0 drivers/dma-buf/dma-buf.c:363
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl fs/ioctl.c:860 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f62fcf530f9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe3edab9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f62fcf530f9
RDX: 0000000020000200 RSI: 0000000040086200 RDI: 0000000000000006
RBP: 00007f62fcf170e0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f62fcf17170
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>

v2: Dont't forget to deregister if DMA mask setup fails.

Reported-by: syzbot+10e27961f4da37c443b2@syzkaller.appspotmail.com
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220520205235.3687336-1-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma-buf/udmabuf.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c
index 2e3b76519b49..b624f3d8f0e6 100644
--- a/drivers/dma-buf/udmabuf.c
+++ b/drivers/dma-buf/udmabuf.c
@@ -327,7 +327,23 @@ static struct miscdevice udmabuf_misc = {
 
 static int __init udmabuf_dev_init(void)
 {
-	return misc_register(&udmabuf_misc);
+	int ret;
+
+	ret = misc_register(&udmabuf_misc);
+	if (ret < 0) {
+		pr_err("Could not initialize udmabuf device\n");
+		return ret;
+	}
+
+	ret = dma_coerce_mask_and_coherent(udmabuf_misc.this_device,
+					   DMA_BIT_MASK(64));
+	if (ret < 0) {
+		pr_err("Could not setup DMA mask for udmabuf device\n");
+		misc_deregister(&udmabuf_misc);
+		return ret;
+	}
+
+	return 0;
 }
 
 static void __exit udmabuf_dev_exit(void)
-- 
2.35.1

[PATCH AUTOSEL 5.10 12/46] udmabuf: Set the DMA mask for the udmabuf device (v2)

[Sasha Levin]

From: Vivek Kasireddy <vivek.kasireddy@intel.com>

[ Upstream commit 9e9fa6a9198b767b00f48160800128e83a038f9f ]

If the DMA mask is not set explicitly, the following warning occurs
when the userspace tries to access the dma-buf via the CPU as
reported by syzbot here:

WARNING: CPU: 1 PID: 3595 at kernel/dma/mapping.c:188
__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188
Modules linked in:
CPU: 0 PID: 3595 Comm: syz-executor249 Not tainted
5.17.0-rc2-syzkaller-00316-g0457e5153e0e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188
Code: 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 75 71 4c 8b 3d c0
83 b5 0d e9 db fe ff ff e8 b6 0f 13 00 0f 0b e8 af 0f 13 00 <0f> 0b 45
   31 e4 e9 54 ff ff ff e8 a0 0f 13 00 49 8d 7f 50 48 b8 00
RSP: 0018:ffffc90002a07d68 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88807e25e2c0 RSI: ffffffff81649e91 RDI: ffff88801b848408
RBP: ffff88801b848000 R08: 0000000000000002 R09: ffff88801d86c74f
R10: ffffffff81649d72 R11: 0000000000000001 R12: 0000000000000002
R13: ffff88801d86c680 R14: 0000000000000001 R15: 0000000000000000
FS:  0000555556e30300(0000) GS:ffff8880b9d00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200000cc CR3: 000000001d74a000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 dma_map_sgtable+0x70/0xf0 kernel/dma/mapping.c:264
 get_sg_table.isra.0+0xe0/0x160 drivers/dma-buf/udmabuf.c:72
 begin_cpu_udmabuf+0x130/0x1d0 drivers/dma-buf/udmabuf.c:126
 dma_buf_begin_cpu_access+0xfd/0x1d0 drivers/dma-buf/dma-buf.c:1164
 dma_buf_ioctl+0x259/0x2b0 drivers/dma-buf/dma-buf.c:363
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl fs/ioctl.c:860 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f62fcf530f9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe3edab9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f62fcf530f9
RDX: 0000000020000200 RSI: 0000000040086200 RDI: 0000000000000006
RBP: 00007f62fcf170e0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f62fcf17170
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>

v2: Dont't forget to deregister if DMA mask setup fails.

Reported-by: syzbot+10e27961f4da37c443b2@syzkaller.appspotmail.com
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220520205235.3687336-1-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma-buf/udmabuf.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c
index 2e3b76519b49..b624f3d8f0e6 100644
--- a/drivers/dma-buf/udmabuf.c
+++ b/drivers/dma-buf/udmabuf.c
@@ -327,7 +327,23 @@ static struct miscdevice udmabuf_misc = {
 
 static int __init udmabuf_dev_init(void)
 {
-	return misc_register(&udmabuf_misc);
+	int ret;
+
+	ret = misc_register(&udmabuf_misc);
+	if (ret < 0) {
+		pr_err("Could not initialize udmabuf device\n");
+		return ret;
+	}
+
+	ret = dma_coerce_mask_and_coherent(udmabuf_misc.this_device,
+					   DMA_BIT_MASK(64));
+	if (ret < 0) {
+		pr_err("Could not setup DMA mask for udmabuf device\n");
+		misc_deregister(&udmabuf_misc);
+		return ret;
+	}
+
+	return 0;
 }
 
 static void __exit udmabuf_dev_exit(void)
-- 
2.35.1

[PATCH AUTOSEL 5.10 13/46] net/mlx5: Add HW definitions of vport debug counters

[Sasha Levin]

From: Saeed Mahameed <saeedm@nvidia.com>

[ Upstream commit 3e94e61bd44d90070dcda53b647fdc826097ef26 ]

total_q_under_processor_handle - number of queues in error state due to an
async error or errored command.

send_queue_priority_update_flow - number of QP/SQ priority/SL update
events.

cq_overrun - number of times CQ entered an error state due to an
overflow.

async_eq_overrun -number of time an EQ mapped to async events was
overrun.

comp_eq_overrun - number of time an EQ mapped to completion events was
overrun.

quota_exceeded_command - number of commands issued and failed due to quota
exceeded.

invalid_command - number of commands issued and failed dues to any reason
other than quota exceeded.

Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mlx5/mlx5_ifc.h | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 6ca97729b54a..4276677ecdb5 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -1282,7 +1282,8 @@ struct mlx5_ifc_cmd_hca_cap_bits {
 
 	u8         reserved_at_120[0xa];
 	u8         log_max_ra_req_dc[0x6];
-	u8         reserved_at_130[0xa];
+	u8         reserved_at_130[0x9];
+	u8         vnic_env_cq_overrun[0x1];
 	u8         log_max_ra_res_dc[0x6];
 
 	u8         reserved_at_140[0x6];
@@ -1472,7 +1473,11 @@ struct mlx5_ifc_cmd_hca_cap_bits {
 	u8         nic_receive_steering_discard[0x1];
 	u8         receive_discard_vport_down[0x1];
 	u8         transmit_discard_vport_down[0x1];
-	u8         reserved_at_343[0x5];
+	u8         eq_overrun_count[0x1];
+	u8         reserved_at_344[0x1];
+	u8         invalid_command_count[0x1];
+	u8         quota_exceeded_count[0x1];
+	u8         reserved_at_347[0x1];
 	u8         log_max_flow_counter_bulk[0x8];
 	u8         max_flow_counter_15_0[0x10];
 
@@ -3128,11 +3133,21 @@ struct mlx5_ifc_vnic_diagnostic_statistics_bits {
 
 	u8         transmit_discard_vport_down[0x40];
 
-	u8         reserved_at_140[0xa0];
+	u8         async_eq_overrun[0x20];
+
+	u8         comp_eq_overrun[0x20];
+
+	u8         reserved_at_180[0x20];
+
+	u8         invalid_command[0x20];
+
+	u8         quota_exceeded_command[0x20];
 
 	u8         internal_rq_out_of_buffer[0x20];
 
-	u8         reserved_at_200[0xe00];
+	u8         cq_overrun[0x20];
+
+	u8         reserved_at_220[0xde0];
 };
 
 struct mlx5_ifc_traffic_counter_bits {
-- 
2.35.1

[PATCH AUTOSEL 5.10 14/46] drm/amd/display: Fix monitor flash issue

[Sasha Levin]

From: Shah Dharati <dharshah@amd.com>

[ Upstream commit b840b64bc8ed3fc46f6d6aa7f97c43862a33bea5 ]

[Why & How]
For a some specific monitors, when connected on boot or hot plug,
monitor flash for 1/2 seconds can happen during first HDCP query
operation. Ading some delay in the init sequence for these monitors
fixes the issue, so it is implemented as monitor specific patch.

Co-authored-by: Shah Dharati <dharshah@amd.com>
Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Shah Dharati <dharshah@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c
index e738c7ae66ec..73bf38f513be 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c
@@ -524,7 +524,7 @@ enum mod_hdcp_status mod_hdcp_hdcp2_dp_transition(struct mod_hdcp *hdcp,
 			set_watchdog_in_ms(hdcp, 3000, output);
 			set_state_id(hdcp, output, D2_A6_WAIT_FOR_RX_ID_LIST);
 		} else {
-			callback_in_ms(0, output);
+			callback_in_ms(1, output);
 			set_state_id(hdcp, output, D2_SEND_CONTENT_STREAM_TYPE);
 		}
 		break;
-- 
2.35.1

[PATCH AUTOSEL 5.10 14/46] drm/amd/display: Fix monitor flash issue

[Sasha Levin]

From: Shah Dharati <dharshah@amd.com>

[ Upstream commit b840b64bc8ed3fc46f6d6aa7f97c43862a33bea5 ]

[Why & How]
For a some specific monitors, when connected on boot or hot plug,
monitor flash for 1/2 seconds can happen during first HDCP query
operation. Ading some delay in the init sequence for these monitors
fixes the issue, so it is implemented as monitor specific patch.

Co-authored-by: Shah Dharati <dharshah@amd.com>
Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Shah Dharati <dharshah@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c
index e738c7ae66ec..73bf38f513be 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c
@@ -524,7 +524,7 @@ enum mod_hdcp_status mod_hdcp_hdcp2_dp_transition(struct mod_hdcp *hdcp,
 			set_watchdog_in_ms(hdcp, 3000, output);
 			set_state_id(hdcp, output, D2_A6_WAIT_FOR_RX_ID_LIST);
 		} else {
-			callback_in_ms(0, output);
+			callback_in_ms(1, output);
 			set_state_id(hdcp, output, D2_SEND_CONTENT_STREAM_TYPE);
 		}
 		break;
-- 
2.35.1

[PATCH AUTOSEL 5.10 14/46] drm/amd/display: Fix monitor flash issue

[Sasha Levin]

From: Shah Dharati <dharshah@amd.com>

[ Upstream commit b840b64bc8ed3fc46f6d6aa7f97c43862a33bea5 ]

[Why & How]
For a some specific monitors, when connected on boot or hot plug,
monitor flash for 1/2 seconds can happen during first HDCP query
operation. Ading some delay in the init sequence for these monitors
fixes the issue, so it is implemented as monitor specific patch.

Co-authored-by: Shah Dharati <dharshah@amd.com>
Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Shah Dharati <dharshah@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c
index e738c7ae66ec..73bf38f513be 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_transition.c
@@ -524,7 +524,7 @@ enum mod_hdcp_status mod_hdcp_hdcp2_dp_transition(struct mod_hdcp *hdcp,
 			set_watchdog_in_ms(hdcp, 3000, output);
 			set_state_id(hdcp, output, D2_A6_WAIT_FOR_RX_ID_LIST);
 		} else {
-			callback_in_ms(0, output);
+			callback_in_ms(1, output);
 			set_state_id(hdcp, output, D2_SEND_CONTENT_STREAM_TYPE);
 		}
 		break;
-- 
2.35.1

[PATCH AUTOSEL 5.10 15/46] selftests: mlxsw: resource_scale: Allow skipping a test

[Sasha Levin]

From: Petr Machata <petrm@nvidia.com>

[ Upstream commit 8cad339db339a39cb82b1188e4be4070a433abac ]

The scale tests are currently testing two things: that some number of
instances of a given resource can actually be created; and that when an
attempt is made to create more than the supported amount, the failures are
noted and handled gracefully.

Sometimes the scale test depends on more than one resource. In particular,
a following patch will add a RIF counter scale test, which depends on the
number of RIF counters that can be bound, and also on the number of RIFs
that can be created.

When the test is limited by the auxiliary resource and not by the primary
one, there's no point trying to run the overflow test, because it would be
testing exhaustion of the wrong resource.

To support this use case, when the $test_get_target yields 0, skip the test
instead.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh | 5 +++++
 .../selftests/drivers/net/mlxsw/spectrum/resource_scale.sh   | 4 ++++
 2 files changed, 9 insertions(+)

diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
index d7cf33a3f18d..ce2b4074ea77 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
@@ -38,6 +38,11 @@ for current_test in ${TESTS:-$ALL_TESTS}; do
 	for should_fail in 0 1; do
 		RET=0
 		target=$(${current_test}_get_target "$should_fail")
+		if ((target == 0)); then
+			log_test_skip "'$current_test' should_fail=$should_fail test"
+			continue
+		fi
+
 		${current_test}_setup_prepare
 		setup_wait $num_netifs
 		${current_test}_test "$target" "$should_fail"
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
index 43f662401bc3..23438d527f6f 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
@@ -40,6 +40,10 @@ for current_test in ${TESTS:-$ALL_TESTS}; do
 		for should_fail in 0 1; do
 			RET=0
 			target=$(${current_test}_get_target "$should_fail")
+			if ((target == 0)); then
+				log_test_skip "'$current_test' [$profile] should_fail=$should_fail test"
+				continue
+			fi
 			${current_test}_setup_prepare
 			setup_wait $num_netifs
 			${current_test}_test "$target" "$should_fail"
-- 
2.35.1

[PATCH AUTOSEL 5.10 16/46] net: dsa: ar9331: fix potential dead lock on mdio access

[Sasha Levin]

From: Oleksij Rempel <o.rempel@pengutronix.de>

[ Upstream commit 7a49f2193063b7db60a964fc26774275a4c964cd ]

Rework MDIO locking to avoid potential  circular locking:

 WARNING: possible circular locking dependency detected
 5.19.0-rc1-ar9331-00017-g3ab364c7c48c #5 Not tainted
 ------------------------------------------------------
 kworker/u2:4/68 is trying to acquire lock:
 81f3c83c (ar9331:1005:(&ar9331_mdio_regmap_config)->lock){+.+.}-{4:4}, at: regmap_write+0x50/0x8c

 but task is already holding lock:
 81f60494 (&bus->mdio_lock){+.+.}-{4:4}, at: mdiobus_read+0x40/0x78

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&bus->mdio_lock){+.+.}-{4:4}:
        lock_acquire+0x2d4/0x360
        __mutex_lock+0xf8/0x384
        mutex_lock_nested+0x2c/0x38
        mdiobus_write+0x44/0x80
        ar9331_sw_bus_write+0x50/0xe4
        _regmap_raw_write_impl+0x604/0x724
        _regmap_bus_raw_write+0x9c/0xb4
        _regmap_write+0xdc/0x1a0
        _regmap_update_bits+0xf4/0x118
        _regmap_select_page+0x108/0x138
        _regmap_raw_read+0x25c/0x288
        _regmap_bus_read+0x60/0x98
        _regmap_read+0xd4/0x1b0
        _regmap_update_bits+0xc4/0x118
        regmap_update_bits_base+0x64/0x8c
        ar9331_sw_irq_bus_sync_unlock+0x40/0x6c
        __irq_set_handler+0x7c/0xac
        ar9331_sw_irq_map+0x48/0x7c
        irq_domain_associate+0x174/0x208
        irq_create_mapping_affinity+0x1a8/0x230
        ar9331_sw_probe+0x22c/0x388
        mdio_probe+0x44/0x70
        really_probe+0x200/0x424
        __driver_probe_device+0x290/0x298
        driver_probe_device+0x54/0xe4
        __device_attach_driver+0xe4/0x130
        bus_for_each_drv+0xb4/0xd8
        __device_attach+0x104/0x1a4
        bus_probe_device+0x48/0xc4
        device_add+0x600/0x800
        mdio_device_register+0x68/0xa0
        of_mdiobus_register+0x2bc/0x3c4
        ag71xx_probe+0x6e4/0x984
        platform_probe+0x78/0xd0
        really_probe+0x200/0x424
        __driver_probe_device+0x290/0x298
        driver_probe_device+0x54/0xe4
        __driver_attach+0x17c/0x190
        bus_for_each_dev+0x8c/0xd0
        bus_add_driver+0x110/0x228
        driver_register+0xe4/0x12c
        do_one_initcall+0x104/0x2a0
        kernel_init_freeable+0x250/0x288
        kernel_init+0x34/0x130
        ret_from_kernel_thread+0x14/0x1c

 -> #0 (ar9331:1005:(&ar9331_mdio_regmap_config)->lock){+.+.}-{4:4}:
        check_noncircular+0x88/0xc0
        __lock_acquire+0x10bc/0x18bc
        lock_acquire+0x2d4/0x360
        __mutex_lock+0xf8/0x384
        mutex_lock_nested+0x2c/0x38
        regmap_write+0x50/0x8c
        ar9331_sw_mbus_read+0x74/0x1b8
        __mdiobus_read+0x90/0xec
        mdiobus_read+0x50/0x78
        get_phy_device+0xa0/0x18c
        fwnode_mdiobus_register_phy+0x120/0x1d4
        of_mdiobus_register+0x244/0x3c4
        devm_of_mdiobus_register+0xe8/0x100
        ar9331_sw_setup+0x16c/0x3a0
        dsa_register_switch+0x7dc/0xcc0
        ar9331_sw_probe+0x370/0x388
        mdio_probe+0x44/0x70
        really_probe+0x200/0x424
        __driver_probe_device+0x290/0x298
        driver_probe_device+0x54/0xe4
        __device_attach_driver+0xe4/0x130
        bus_for_each_drv+0xb4/0xd8
        __device_attach+0x104/0x1a4
        bus_probe_device+0x48/0xc4
        deferred_probe_work_func+0xf0/0x10c
        process_one_work+0x314/0x4d4
        worker_thread+0x2a4/0x354
        kthread+0x134/0x13c
        ret_from_kernel_thread+0x14/0x1c

 other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&bus->mdio_lock);
                                lock(ar9331:1005:(&ar9331_mdio_regmap_config)->lock);
                                lock(&bus->mdio_lock);
   lock(ar9331:1005:(&ar9331_mdio_regmap_config)->lock);

  *** DEADLOCK ***

 5 locks held by kworker/u2:4/68:
  #0: 81c04eb4 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1e4/0x4d4
  #1: 81f0de78 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1e4/0x4d4
  #2: 81f0a880 (&dev->mutex){....}-{4:4}, at: __device_attach+0x40/0x1a4
  #3: 80c8aee0 (dsa2_mutex){+.+.}-{4:4}, at: dsa_register_switch+0x5c/0xcc0
  #4: 81f60494 (&bus->mdio_lock){+.+.}-{4:4}, at: mdiobus_read+0x40/0x78

 stack backtrace:
 CPU: 0 PID: 68 Comm: kworker/u2:4 Not tainted 5.19.0-rc1-ar9331-00017-g3ab364c7c48c #5
 Workqueue: events_unbound deferred_probe_work_func
 Stack : 00000056 800d4638 81f0d64c 00000004 00000018 00000000 80a20000 80a20000
         80937590 81ef3858 81f0d760 3913578a 00000005 8045e824 81f0d600 a8db84cc
         00000000 00000000 80937590 00000a44 00000000 00000002 00000001 ffffffff
         81f0d6a4 80982d7c 0000000f 20202020 80a20000 00000001 80937590 81ef3858
         81f0d760 3913578a 00000005 00000005 00000000 03bd0000 00000000 80e00000
         ...
 Call Trace:
 [<80069db0>] show_stack+0x94/0x130
 [<8045e824>] dump_stack_lvl+0x54/0x8c
 [<800c7fac>] check_noncircular+0x88/0xc0
 [<800ca068>] __lock_acquire+0x10bc/0x18bc
 [<800cb478>] lock_acquire+0x2d4/0x360
 [<807b84c4>] __mutex_lock+0xf8/0x384
 [<807b877c>] mutex_lock_nested+0x2c/0x38
 [<804ea640>] regmap_write+0x50/0x8c
 [<80501e38>] ar9331_sw_mbus_read+0x74/0x1b8
 [<804fe9a0>] __mdiobus_read+0x90/0xec
 [<804feac4>] mdiobus_read+0x50/0x78
 [<804fcf74>] get_phy_device+0xa0/0x18c
 [<804ffeb4>] fwnode_mdiobus_register_phy+0x120/0x1d4
 [<805004f0>] of_mdiobus_register+0x244/0x3c4
 [<804f0c50>] devm_of_mdiobus_register+0xe8/0x100
 [<805017a0>] ar9331_sw_setup+0x16c/0x3a0
 [<807355c8>] dsa_register_switch+0x7dc/0xcc0
 [<80501468>] ar9331_sw_probe+0x370/0x388
 [<804ff0c0>] mdio_probe+0x44/0x70
 [<804d1848>] really_probe+0x200/0x424
 [<804d1cfc>] __driver_probe_device+0x290/0x298
 [<804d1d58>] driver_probe_device+0x54/0xe4
 [<804d2298>] __device_attach_driver+0xe4/0x130
 [<804cf048>] bus_for_each_drv+0xb4/0xd8
 [<804d200c>] __device_attach+0x104/0x1a4
 [<804d026c>] bus_probe_device+0x48/0xc4
 [<804d108c>] deferred_probe_work_func+0xf0/0x10c
 [<800a0ffc>] process_one_work+0x314/0x4d4
 [<800a17fc>] worker_thread+0x2a4/0x354
 [<800a9a54>] kthread+0x134/0x13c
 [<8006306c>] ret_from_kernel_thread+0x14/0x1c
[

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220616112550.877118-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/qca/ar9331.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index c33bdcf7efc5..59114ecfe555 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -626,7 +626,7 @@ static int __ar9331_mdio_write(struct mii_bus *sbus, u8 mode, u16 reg, u16 val)
 		FIELD_GET(AR9331_SW_LOW_ADDR_PHY, reg);
 	r = FIELD_GET(AR9331_SW_LOW_ADDR_REG, reg);
 
-	return mdiobus_write(sbus, p, r, val);
+	return __mdiobus_write(sbus, p, r, val);
 }
 
 static int __ar9331_mdio_read(struct mii_bus *sbus, u16 reg)
@@ -637,7 +637,7 @@ static int __ar9331_mdio_read(struct mii_bus *sbus, u16 reg)
 		FIELD_GET(AR9331_SW_LOW_ADDR_PHY, reg);
 	r = FIELD_GET(AR9331_SW_LOW_ADDR_REG, reg);
 
-	return mdiobus_read(sbus, p, r);
+	return __mdiobus_read(sbus, p, r);
 }
 
 static int ar9331_mdio_read(void *ctx, const void *reg_buf, size_t reg_len,
@@ -657,6 +657,8 @@ static int ar9331_mdio_read(void *ctx, const void *reg_buf, size_t reg_len,
 		return 0;
 	}
 
+	mutex_lock_nested(&sbus->mdio_lock, MDIO_MUTEX_NESTED);
+
 	ret = __ar9331_mdio_read(sbus, reg);
 	if (ret < 0)
 		goto error;
@@ -668,9 +670,13 @@ static int ar9331_mdio_read(void *ctx, const void *reg_buf, size_t reg_len,
 
 	*(u32 *)val_buf |= ret << 16;
 
+	mutex_unlock(&sbus->mdio_lock);
+
 	return 0;
 error:
+	mutex_unlock(&sbus->mdio_lock);
 	dev_err_ratelimited(&sbus->dev, "Bus error. Failed to read register.\n");
+
 	return ret;
 }
 
@@ -680,12 +686,15 @@ static int ar9331_mdio_write(void *ctx, u32 reg, u32 val)
 	struct mii_bus *sbus = priv->sbus;
 	int ret;
 
+	mutex_lock_nested(&sbus->mdio_lock, MDIO_MUTEX_NESTED);
 	if (reg == AR9331_SW_REG_PAGE) {
 		ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_PAGE,
 					  0, val);
 		if (ret < 0)
 			goto error;
 
+		mutex_unlock(&sbus->mdio_lock);
+
 		return 0;
 	}
 
@@ -705,10 +714,14 @@ static int ar9331_mdio_write(void *ctx, u32 reg, u32 val)
 	if (ret < 0)
 		goto error;
 
+	mutex_unlock(&sbus->mdio_lock);
+
 	return 0;
 
 error:
+	mutex_unlock(&sbus->mdio_lock);
 	dev_err_ratelimited(&sbus->dev, "Bus error. Failed to write register.\n");
+
 	return ret;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 17/46] media: davinci: vpif: add missing of_node_put() in vpif_probe()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit bb45f5433f23cf103ba29c9692ee553e061f2cb4 ]

of_graph_get_next_endpoint() returns an 'endpoint' node pointer
with refcount incremented. The refcount should be decremented
before returning from vpif_probe().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/davinci/vpif.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c
index ee610daf90a3..7e64b3f85b53 100644
--- a/drivers/media/platform/davinci/vpif.c
+++ b/drivers/media/platform/davinci/vpif.c
@@ -451,6 +451,7 @@ static int vpif_probe(struct platform_device *pdev)
 					      endpoint);
 	if (!endpoint)
 		return 0;
+	of_node_put(endpoint);
 
 	/*
 	 * For DT platforms, manually create platform_devices for
-- 
2.35.1

[PATCH AUTOSEL 5.10 18/46] media: mediatek: vcodec: prevent kernel crash when scp ipi timeout

[Sasha Levin]

From: Yunfei Dong <yunfei.dong@mediatek.com>

[ Upstream commit 9223415d47e1efe939fcc791870db8ce5bb6cc03 ]

When SCP timeout during playing video, kernel crashes with following
message. It's caused by accessing NULL pointer in vpu_dec_ipi_handler.
This patch doesn't solve the root cause of NULL pointer, but merely
prevent kernel crashed when encounter the NULL pointer.

After applied this patch, kernel keeps alive, only the video player turns
to green screen.

[67242.065474] pc : vpu_dec_ipi_handler+0xa0/0xb20 [mtk_vcodec_dec]
[67242.065485] [MTK_V4L2] level=0 fops_vcodec_open(),334:
18000000.vcodec_dec decoder [135]
[67242.065523] lr : scp_ipi_handler+0x11c/0x244 [mtk_scp]
[67242.065540] sp : ffffffbb4207fb10
[67242.065557] x29: ffffffbb4207fb30 x28: ffffffd00a1d5000
[67242.065592] x27: 1ffffffa0143aa24 x26: 0000000000000000
[67242.065625] x25: dfffffd000000000 x24: ffffffd0168bfdb0
[67242.065659] x23: 1ffffff76840ff74 x22: ffffffbb41fa8a88
[67242.065692] x21: ffffffbb4207fb9c x20: ffffffbb4207fba0
[67242.065725] x19: ffffffbb4207fb98 x18: 0000000000000000
[67242.065758] x17: 0000000000000000 x16: ffffffd042022094
[67242.065791] x15: 1ffffff77ed4b71a x14: 1ffffff77ed4b719
[67242.065824] x13: 0000000000000000 x12: 0000000000000000
[67242.065857] x11: 0000000000000000 x10: dfffffd000000001
[67242.065890] x9 : 0000000000000000 x8 : 0000000000000002
[67242.065923] x7 : 0000000000000000 x6 : 000000000000003f
[67242.065956] x5 : 0000000000000040 x4 : ffffffffffffffe0
[67242.065989] x3 : ffffffd043b841b8 x2 : 0000000000000000
[67242.066021] x1 : 0000000000000010 x0 : 0000000000000010
[67242.066055] Call trace:
[67242.066092]  vpu_dec_ipi_handler+0xa0/0xb20 [mtk_vcodec_dec
12220d230d83a7426fc38c56b3e7bc6066955bae]
[67242.066119]  scp_ipi_handler+0x11c/0x244 [mtk_scp
8fb69c2ef141dd3192518b952b65aba35627b8bf]
[67242.066145]  mt8192_scp_irq_handler+0x70/0x128 [mtk_scp
8fb69c2ef141dd3192518b952b65aba35627b8bf]
[67242.066172]  scp_irq_handler+0xa0/0x114 [mtk_scp
8fb69c2ef141dd3192518b952b65aba35627b8bf]
[67242.066200]  irq_thread_fn+0x84/0xf8
[67242.066220]  irq_thread+0x170/0x1ec
[67242.066242]  kthread+0x2f8/0x3b8
[67242.066264]  ret_from_fork+0x10/0x30
[67242.066292] Code: 38f96908 35003628 91004340 d343fc08 (38f96908)

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mtk-vcodec/vdec_vpu_if.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
index 58b0e6fa8fd2..ccdd78f21702 100644
--- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
+++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
@@ -42,6 +42,11 @@ static void vpu_dec_ipi_handler(void *data, unsigned int len, void *priv)
 	struct vdec_vpu_inst *vpu = (struct vdec_vpu_inst *)
 					(unsigned long)msg->ap_inst_addr;
 
+	if (!vpu) {
+		mtk_v4l2_err("ap_inst_addr is NULL, did the SCP hang or crash?");
+		return;
+	}
+
 	mtk_vcodec_debug(vpu, "+ id=%X", msg->msg_id);
 
 	if (msg->status == 0) {
-- 
2.35.1

[PATCH AUTOSEL 5.10 18/46] media: mediatek: vcodec: prevent kernel crash when scp ipi timeout

[Sasha Levin]

From: Yunfei Dong <yunfei.dong@mediatek.com>

[ Upstream commit 9223415d47e1efe939fcc791870db8ce5bb6cc03 ]

When SCP timeout during playing video, kernel crashes with following
message. It's caused by accessing NULL pointer in vpu_dec_ipi_handler.
This patch doesn't solve the root cause of NULL pointer, but merely
prevent kernel crashed when encounter the NULL pointer.

After applied this patch, kernel keeps alive, only the video player turns
to green screen.

[67242.065474] pc : vpu_dec_ipi_handler+0xa0/0xb20 [mtk_vcodec_dec]
[67242.065485] [MTK_V4L2] level=0 fops_vcodec_open(),334:
18000000.vcodec_dec decoder [135]
[67242.065523] lr : scp_ipi_handler+0x11c/0x244 [mtk_scp]
[67242.065540] sp : ffffffbb4207fb10
[67242.065557] x29: ffffffbb4207fb30 x28: ffffffd00a1d5000
[67242.065592] x27: 1ffffffa0143aa24 x26: 0000000000000000
[67242.065625] x25: dfffffd000000000 x24: ffffffd0168bfdb0
[67242.065659] x23: 1ffffff76840ff74 x22: ffffffbb41fa8a88
[67242.065692] x21: ffffffbb4207fb9c x20: ffffffbb4207fba0
[67242.065725] x19: ffffffbb4207fb98 x18: 0000000000000000
[67242.065758] x17: 0000000000000000 x16: ffffffd042022094
[67242.065791] x15: 1ffffff77ed4b71a x14: 1ffffff77ed4b719
[67242.065824] x13: 0000000000000000 x12: 0000000000000000
[67242.065857] x11: 0000000000000000 x10: dfffffd000000001
[67242.065890] x9 : 0000000000000000 x8 : 0000000000000002
[67242.065923] x7 : 0000000000000000 x6 : 000000000000003f
[67242.065956] x5 : 0000000000000040 x4 : ffffffffffffffe0
[67242.065989] x3 : ffffffd043b841b8 x2 : 0000000000000000
[67242.066021] x1 : 0000000000000010 x0 : 0000000000000010
[67242.066055] Call trace:
[67242.066092]  vpu_dec_ipi_handler+0xa0/0xb20 [mtk_vcodec_dec
12220d230d83a7426fc38c56b3e7bc6066955bae]
[67242.066119]  scp_ipi_handler+0x11c/0x244 [mtk_scp
8fb69c2ef141dd3192518b952b65aba35627b8bf]
[67242.066145]  mt8192_scp_irq_handler+0x70/0x128 [mtk_scp
8fb69c2ef141dd3192518b952b65aba35627b8bf]
[67242.066172]  scp_irq_handler+0xa0/0x114 [mtk_scp
8fb69c2ef141dd3192518b952b65aba35627b8bf]
[67242.066200]  irq_thread_fn+0x84/0xf8
[67242.066220]  irq_thread+0x170/0x1ec
[67242.066242]  kthread+0x2f8/0x3b8
[67242.066264]  ret_from_fork+0x10/0x30
[67242.066292] Code: 38f96908 35003628 91004340 d343fc08 (38f96908)

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mtk-vcodec/vdec_vpu_if.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
index 58b0e6fa8fd2..ccdd78f21702 100644
--- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
+++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
@@ -42,6 +42,11 @@ static void vpu_dec_ipi_handler(void *data, unsigned int len, void *priv)
 	struct vdec_vpu_inst *vpu = (struct vdec_vpu_inst *)
 					(unsigned long)msg->ap_inst_addr;
 
+	if (!vpu) {
+		mtk_v4l2_err("ap_inst_addr is NULL, did the SCP hang or crash?");
+		return;
+	}
+
 	mtk_vcodec_debug(vpu, "+ id=%X", msg->msg_id);
 
 	if (msg->status == 0) {
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 19/46] media: airspy: respect the DMA coherency rules

[Sasha Levin]

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit ca9dc8d06ab64543a6a31adac5003349c5671218 ]

If we want to avoid memory corruption
on incoherent architectures, buffers for DMA
must not reside
- on the stack
- embedded within other structures

Allocate them separately.

v2: fix uninitialized return value

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/airspy/airspy.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/airspy/airspy.c b/drivers/media/usb/airspy/airspy.c
index 751703db06f5..c7499787bffe 100644
--- a/drivers/media/usb/airspy/airspy.c
+++ b/drivers/media/usb/airspy/airspy.c
@@ -123,7 +123,7 @@ struct airspy {
 
 	/* USB control message buffer */
 	#define BUF_SIZE 128
-	u8 buf[BUF_SIZE];
+	u8 *buf;
 
 	/* Current configuration */
 	unsigned int f_adc;
@@ -856,6 +856,7 @@ static void airspy_video_release(struct v4l2_device *v)
 
 	v4l2_ctrl_handler_free(&s->hdl);
 	v4l2_device_unregister(&s->v4l2_dev);
+	kfree(s->buf);
 	kfree(s);
 }
 
@@ -963,7 +964,10 @@ static int airspy_probe(struct usb_interface *intf,
 {
 	struct airspy *s;
 	int ret;
-	u8 u8tmp, buf[BUF_SIZE];
+	u8 u8tmp, *buf;
+
+	buf = NULL;
+	ret = -ENOMEM;
 
 	s = kzalloc(sizeof(struct airspy), GFP_KERNEL);
 	if (s == NULL) {
@@ -971,6 +975,13 @@ static int airspy_probe(struct usb_interface *intf,
 		return -ENOMEM;
 	}
 
+	s->buf = kzalloc(BUF_SIZE, GFP_KERNEL);
+	if (!s->buf)
+		goto err_free_mem;
+	buf = kzalloc(BUF_SIZE, GFP_KERNEL);
+	if (!buf)
+		goto err_free_mem;
+
 	mutex_init(&s->v4l2_lock);
 	mutex_init(&s->vb_queue_lock);
 	spin_lock_init(&s->queued_bufs_lock);
@@ -1068,6 +1079,8 @@ static int airspy_probe(struct usb_interface *intf,
 	v4l2_ctrl_handler_free(&s->hdl);
 	v4l2_device_unregister(&s->v4l2_dev);
 err_free_mem:
+	kfree(buf);
+	kfree(s->buf);
 	kfree(s);
 	return ret;
 }
-- 
2.35.1

[PATCH AUTOSEL 5.10 20/46] media: pvrusb2: fix memory leak in pvr_probe

[Sasha Levin]

From: Dongliang Mu <mudongliangabcd@gmail.com>

[ Upstream commit 945a9a8e448b65bec055d37eba58f711b39f66f0 ]

The error handling code in pvr2_hdw_create forgets to unregister the
v4l2 device. When pvr2_hdw_create returns back to pvr2_context_create,
it calls pvr2_context_destroy to destroy context, but mp->hdw is NULL,
which leads to that pvr2_hdw_destroy directly returns.

Fix this by adding v4l2_device_unregister to decrease the refcount of
usb interface.

Reported-by: syzbot+77b432d57c4791183ed4@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
index fccd1798445d..d22ce328a279 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -2610,6 +2610,7 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
 		del_timer_sync(&hdw->encoder_run_timer);
 		del_timer_sync(&hdw->encoder_wait_timer);
 		flush_work(&hdw->workpoll);
+		v4l2_device_unregister(&hdw->v4l2_dev);
 		usb_free_urb(hdw->ctl_read_urb);
 		usb_free_urb(hdw->ctl_write_urb);
 		kfree(hdw->ctl_read_buffer);
-- 
2.35.1

[PATCH AUTOSEL 5.10 21/46] rcu: Apply noinstr to rcu_idle_enter() and rcu_idle_exit()

[Sasha Levin]

From: "Paul E. McKenney" <paulmck@kernel.org>

[ Upstream commit ed4ae5eff4b38797607cbdd80da394149110fb37 ]

This commit applies the "noinstr" tag to the rcu_idle_enter() and
rcu_idle_exit() functions, which are invoked from portions of the idle
loop that cannot be instrumented.  These tags require reworking the
rcu_eqs_enter() and rcu_eqs_exit() functions that these two functions
invoke in order to cause them to use normal assertions rather than
lockdep.  In addition, within rcu_idle_exit(), the raw versions of
local_irq_save() and local_irq_restore() are used, again to avoid issues
with lockdep in uninstrumented code.

This patch is based in part on an earlier patch by Jiri Olsa, discussions
with Peter Zijlstra and Frederic Weisbecker, earlier changes by Thomas
Gleixner, and off-list discussions with Yonghong Song.

Link: https://lore.kernel.org/lkml/20220515203653.4039075-1-jolsa@kernel.org/
Reported-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/rcu/tree.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index b41009a283ca..9e124b1e0abb 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -631,8 +631,8 @@ static noinstr void rcu_eqs_enter(bool user)
 		return;
 	}
 
-	lockdep_assert_irqs_disabled();
 	instrumentation_begin();
+	lockdep_assert_irqs_disabled();
 	trace_rcu_dyntick(TPS("Start"), rdp->dynticks_nesting, 0, atomic_read(&rdp->dynticks));
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !user && !is_idle_task(current));
 	rdp = this_cpu_ptr(&rcu_data);
@@ -661,9 +661,9 @@ static noinstr void rcu_eqs_enter(bool user)
  * If you add or remove a call to rcu_idle_enter(), be sure to test with
  * CONFIG_RCU_EQS_DEBUG=y.
  */
-void rcu_idle_enter(void)
+void noinstr rcu_idle_enter(void)
 {
-	lockdep_assert_irqs_disabled();
+	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !raw_irqs_disabled());
 	rcu_eqs_enter(false);
 }
 EXPORT_SYMBOL_GPL(rcu_idle_enter);
@@ -843,7 +843,7 @@ static void noinstr rcu_eqs_exit(bool user)
 	struct rcu_data *rdp;
 	long oldval;
 
-	lockdep_assert_irqs_disabled();
+	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !raw_irqs_disabled());
 	rdp = this_cpu_ptr(&rcu_data);
 	oldval = rdp->dynticks_nesting;
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && oldval < 0);
@@ -879,13 +879,13 @@ static void noinstr rcu_eqs_exit(bool user)
  * If you add or remove a call to rcu_idle_exit(), be sure to test with
  * CONFIG_RCU_EQS_DEBUG=y.
  */
-void rcu_idle_exit(void)
+void noinstr rcu_idle_exit(void)
 {
 	unsigned long flags;
 
-	local_irq_save(flags);
+	raw_local_irq_save(flags);
 	rcu_eqs_exit(false);
-	local_irq_restore(flags);
+	raw_local_irq_restore(flags);
 }
 EXPORT_SYMBOL_GPL(rcu_idle_exit);
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 22/46] drm/bridge/tc358775: Fix DSI clock division for vsync delay calculation

[Sasha Levin]

From: Jiri Vanek <jirivanek1@gmail.com>

[ Upstream commit 993a87917c2af59efb0ee1ce43c878ca8790ba1c ]

Use the same PCLK divide option (divide DSI clock to generate pixel clock)
which is set to LVDS Configuration Register (LVCFG) also for a VSync delay
calculation. Without this change an auxiliary variable could underflow
during the calculation for some dual-link LVDS panels and then calculated
VSync delay is wrong. This leads to a shifted picture on a panel.

Tested-by: Jiri Vanek <jirivanek1@gmail.com>
Signed-off-by: Jiri Vanek <jirivanek1@gmail.com>
Reviewed-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615222221.1501-3-jirivanek1@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/tc358775.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c
index 2272adcc5b4a..70b6210c9803 100644
--- a/drivers/gpu/drm/bridge/tc358775.c
+++ b/drivers/gpu/drm/bridge/tc358775.c
@@ -429,7 +429,7 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
 		val = TC358775_VPCTRL_MSF(1);
 
 	dsiclk = mode->crtc_clock * 3 * tc->bpc / tc->num_dsi_lanes / 1000;
-	clkdiv = dsiclk / DIVIDE_BY_3 * tc->lvds_link;
+	clkdiv = dsiclk / (tc->lvds_link == DUAL_LINK ? DIVIDE_BY_6 : DIVIDE_BY_3);
 	byteclk = dsiclk / 4;
 	t1 = hactive * (tc->bpc * 3 / 8) / tc->num_dsi_lanes;
 	t2 = ((100000 / clkdiv)) * (hactive + hback_porch + hsync_len + hfront_porch) / 1000;
-- 
2.35.1

[PATCH AUTOSEL 5.10 22/46] drm/bridge/tc358775: Fix DSI clock division for vsync delay calculation

[Sasha Levin]

From: Jiri Vanek <jirivanek1@gmail.com>

[ Upstream commit 993a87917c2af59efb0ee1ce43c878ca8790ba1c ]

Use the same PCLK divide option (divide DSI clock to generate pixel clock)
which is set to LVDS Configuration Register (LVCFG) also for a VSync delay
calculation. Without this change an auxiliary variable could underflow
during the calculation for some dual-link LVDS panels and then calculated
VSync delay is wrong. This leads to a shifted picture on a panel.

Tested-by: Jiri Vanek <jirivanek1@gmail.com>
Signed-off-by: Jiri Vanek <jirivanek1@gmail.com>
Reviewed-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615222221.1501-3-jirivanek1@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/tc358775.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c
index 2272adcc5b4a..70b6210c9803 100644
--- a/drivers/gpu/drm/bridge/tc358775.c
+++ b/drivers/gpu/drm/bridge/tc358775.c
@@ -429,7 +429,7 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
 		val = TC358775_VPCTRL_MSF(1);
 
 	dsiclk = mode->crtc_clock * 3 * tc->bpc / tc->num_dsi_lanes / 1000;
-	clkdiv = dsiclk / DIVIDE_BY_3 * tc->lvds_link;
+	clkdiv = dsiclk / (tc->lvds_link == DUAL_LINK ? DIVIDE_BY_6 : DIVIDE_BY_3);
 	byteclk = dsiclk / 4;
 	t1 = hactive * (tc->bpc * 3 / 8) / tc->num_dsi_lanes;
 	t2 = ((100000 / clkdiv)) * (hactive + hback_porch + hsync_len + hfront_porch) / 1000;
-- 
2.35.1

[PATCH AUTOSEL 5.10 23/46] uprobe: gate bpf call behind BPF_EVENTS

[Sasha Levin]

From: Delyan Kratunov <delyank@fb.com>

[ Upstream commit aca80dd95e20f1fa0daa212afc83c9fa0ad239e5 ]

The call into bpf from uprobes needs to be gated now that it doesn't use
the trace_events.h helpers.

Randy found this as a randconfig build failure on linux-next [1].

  [1]: https://lore.kernel.org/linux-next/2de99180-7d55-2fdf-134d-33198c27cc58@infradead.org/

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/cb8bfbbcde87ed5d811227a393ef4925f2aadb7b.camel@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_uprobe.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/trace/trace_uprobe.c b/kernel/trace/trace_uprobe.c
index 9900d4e3808c..4d62342ff970 100644
--- a/kernel/trace/trace_uprobe.c
+++ b/kernel/trace/trace_uprobe.c
@@ -1351,6 +1351,7 @@ static void __uprobe_perf_func(struct trace_uprobe *tu,
 	int size, esize;
 	int rctx;
 
+#ifdef CONFIG_BPF_EVENTS
 	if (bpf_prog_array_valid(call)) {
 		u32 ret;
 
@@ -1360,6 +1361,7 @@ static void __uprobe_perf_func(struct trace_uprobe *tu,
 		if (!ret)
 			return;
 	}
+#endif /* CONFIG_BPF_EVENTS */
 
 	esize = SIZEOF_TRACE_ENTRY(is_ret_probe(tu));
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 24/46] rcuscale: Fix smp_processor_id()-in-preemptible warnings

[Sasha Levin]

From: Zqiang <qiang1.zhang@intel.com>

[ Upstream commit 92366810644d5675043c792abb70eaf974a77384 ]

Systems built with CONFIG_DEBUG_PREEMPT=y can trigger the following
BUG while running the rcuscale performance test:

BUG: using smp_processor_id() in preemptible [00000000] code: rcu_scale_write/69
CPU: 0 PID: 66 Comm: rcu_scale_write Not tainted 5.18.0-rc7-next-20220517-yoctodev-standard+
caller is debug_smp_processor_id+0x17/0x20
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x5e
dump_stack+0x10/0x12
check_preemption_disabled+0xdf/0xf0
debug_smp_processor_id+0x17/0x20
rcu_scale_writer+0x2b5/0x580
kthread+0x177/0x1b0
ret_from_fork+0x22/0x30
</TASK>

Reproduction method:
runqemu kvm slirp nographic qemuparams="-m 4096 -smp 8" bootparams="isolcpus=2,3
nohz_full=2,3 rcu_nocbs=2,3 rcutree.dump_tree=1 rcuscale.shutdown=false
rcuscale.gp_async=true" -d

The problem is that the rcu_scale_writer() kthreads fail to set the
PF_NO_SETAFFINITY flags, which causes is_percpu_thread() to assume
that the kthread's affinity might change at any time, thus the BUG
noted above.

This commit therefore causes rcu_scale_writer() to set PF_NO_SETAFFINITY
in its kthread's ->flags field, thus preventing this BUG.

Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/rcu/rcuscale.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/rcu/rcuscale.c b/kernel/rcu/rcuscale.c
index 2819b95479af..ca61dc9a9358 100644
--- a/kernel/rcu/rcuscale.c
+++ b/kernel/rcu/rcuscale.c
@@ -369,6 +369,7 @@ rcu_scale_writer(void *arg)
 	VERBOSE_SCALEOUT_STRING("rcu_scale_writer task started");
 	WARN_ON(!wdpp);
 	set_cpus_allowed_ptr(current, cpumask_of(me % nr_cpu_ids));
+	current->flags |= PF_NO_SETAFFINITY;
 	sched_set_fifo_low(current);
 
 	if (holdoff)
-- 
2.35.1

[PATCH AUTOSEL 5.10 25/46] mlxsw: cmd: Increase 'config_profile.flood_mode' length

[Sasha Levin]

From: Amit Cohen <amcohen@nvidia.com>

[ Upstream commit 89df3c6261f271c550f120b5ccf4d9c5132e870c ]

Currently, the length of 'config_profile.flood_mode' is defined as 2
bits, while the correct length is 3 bits.

As preparation for unified bridge model, which will use the whole field
length, fix it and increase the field to the correct size.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/cmd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/cmd.h b/drivers/net/ethernet/mellanox/mlxsw/cmd.h
index 91f68fb0b420..dda06a2bd294 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/cmd.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/cmd.h
@@ -722,7 +722,7 @@ MLXSW_ITEM32(cmd_mbox, config_profile, max_vid_flood_tables, 0x30, 8, 4);
  * max_fid_offset_flood_tables indicates the number of FID-offset tables.
  * max_fid_flood_tables indicates the number of per-FID tables.
  */
-MLXSW_ITEM32(cmd_mbox, config_profile, flood_mode, 0x30, 0, 2);
+MLXSW_ITEM32(cmd_mbox, config_profile, flood_mode, 0x30, 0, 3);
 
 /* cmd_mbox_config_profile_max_fid_offset_flood_tables
  * Maximum number of FID-offset flooding tables.
-- 
2.35.1

[PATCH AUTOSEL 5.10 26/46] media: atmel: atmel-isc-base: allow wb ctrls to be changed when isc is not configured

[Sasha Levin]

From: Eugen Hristev <eugen.hristev@microchip.com>

[ Upstream commit aa63c5eaf7f7d2d3a4b1cc5782e7151b8ae3079f ]

When attempting to change the white balance (WB) ctrls before starting
streaming, e.g.:

 # v4l2-ctl -L

User Controls
..
            blue_component_gain 0x009819c1 (int)    : min=0 max=8191 step=1 default=512 value=512 flags=slider
..
 # v4l2-ctl --set-ctrl=blue_component_gain=500
 # v4l2-ctl -L
..
            blue_component_gain 0x009819c1 (int)    : min=0 max=8191 step=1 default=512 value=500 flags=slider
..

These will not be written to the internal data struct and will not be
written to the WB hardware module.
Thus, after starting streaming, they will be reset to default:

 # v4l2-ctl -L
..
            blue_component_gain 0x009819c1 (int)    : min=0 max=8191 step=1 default=512 value=512 flags=slider
..

It does not make much sense to not be able to configure the WB controls
at all times. Even if the sensor would not be RAW Bayer (and in this case the
WB module is unavailable), the user could configure the ISC itself, as the
ISC should not care about the sensor format.
Thus, when WB module is available (if the sensor changes format e.g.) it will
be already configured as be user's desires.
In consequence, remove the check in isc_s_awb_ctrl that will return if ISC
does not know the sensor format.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/atmel/atmel-isc-base.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index fe3ec8d0eaee..5364ec24947c 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -1915,10 +1915,6 @@ static int isc_s_awb_ctrl(struct v4l2_ctrl *ctrl)
 		else
 			ctrls->awb = ISC_WB_NONE;
 
-		/* we did not configure ISC yet */
-		if (!isc->config.sd_format)
-			break;
-
 		/* configure the controls with new values from v4l2 */
 		if (ctrl->cluster[ISC_CTRL_R_GAIN]->is_new)
 			ctrls->gain[ISC_HIS_CFG_MODE_R] = isc->r_gain_ctrl->val;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 26/46] media: atmel: atmel-isc-base: allow wb ctrls to be changed when isc is not configured

[Sasha Levin]

From: Eugen Hristev <eugen.hristev@microchip.com>

[ Upstream commit aa63c5eaf7f7d2d3a4b1cc5782e7151b8ae3079f ]

When attempting to change the white balance (WB) ctrls before starting
streaming, e.g.:

 # v4l2-ctl -L

User Controls
..
            blue_component_gain 0x009819c1 (int)    : min=0 max=8191 step=1 default=512 value=512 flags=slider
..
 # v4l2-ctl --set-ctrl=blue_component_gain=500
 # v4l2-ctl -L
..
            blue_component_gain 0x009819c1 (int)    : min=0 max=8191 step=1 default=512 value=500 flags=slider
..

These will not be written to the internal data struct and will not be
written to the WB hardware module.
Thus, after starting streaming, they will be reset to default:

 # v4l2-ctl -L
..
            blue_component_gain 0x009819c1 (int)    : min=0 max=8191 step=1 default=512 value=512 flags=slider
..

It does not make much sense to not be able to configure the WB controls
at all times. Even if the sensor would not be RAW Bayer (and in this case the
WB module is unavailable), the user could configure the ISC itself, as the
ISC should not care about the sensor format.
Thus, when WB module is available (if the sensor changes format e.g.) it will
be already configured as be user's desires.
In consequence, remove the check in isc_s_awb_ctrl that will return if ISC
does not know the sensor format.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/atmel/atmel-isc-base.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index fe3ec8d0eaee..5364ec24947c 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -1915,10 +1915,6 @@ static int isc_s_awb_ctrl(struct v4l2_ctrl *ctrl)
 		else
 			ctrls->awb = ISC_WB_NONE;
 
-		/* we did not configure ISC yet */
-		if (!isc->config.sd_format)
-			break;
-
 		/* configure the controls with new values from v4l2 */
 		if (ctrl->cluster[ISC_CTRL_R_GAIN]->is_new)
 			ctrls->gain[ISC_HIS_CFG_MODE_R] = isc->r_gain_ctrl->val;
-- 
2.35.1

[PATCH AUTOSEL 5.10 27/46] kselftests: Enable the echo command to print newlines in Makefile

[Sasha Levin]

From: Gautam <gautammenghani201@gmail.com>

[ Upstream commit 3297a4df805d4263506b6dfec4d1bbeff8862dd8 ]

In the install section of the main Makefile of kselftests, the echo
command is used with -n flag, which disables the printing of new line
due to which the output contains "\n" chars as follows:

  Emit Tests for alsa\nSkipping non-existent dir: arm64
  Emit Tests for breakpoints\nEmit Tests for capabilities\n

This patch fixes the above bug by using the -e flag.

Signed-off-by: Gautam <gautammenghani201@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index d9c283503159..a90eacec83ee 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -233,7 +233,7 @@ ifdef INSTALL_PATH
 	for TARGET in $(TARGETS); do \
 		BUILD_TARGET=$$BUILD/$$TARGET;	\
 		[ ! -d $(INSTALL_PATH)/$$TARGET ] && echo "Skipping non-existent dir: $$TARGET" && continue; \
-		echo -n "Emit Tests for $$TARGET\n"; \
+		echo -ne "Emit Tests for $$TARGET\n"; \
 		$(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET COLLECTION=$$TARGET \
 			-C $$TARGET emit_tests >> $(TEST_LIST); \
 	done;
-- 
2.35.1

[PATCH AUTOSEL 5.10 28/46] ipv6/addrconf: fix timing bug in tempaddr regen

[Sasha Levin]

From: Sam Edwards <cfsworks@gmail.com>

[ Upstream commit 778964f2fdf05e5d2e6ca9bc3f450b3db454ba9c ]

The addrconf_verify_rtnl() function uses a big if/elseif/elseif/... block
to categorize each address by what type of attention it needs.  An
about-to-expire (RFC 4941) temporary address is one such category, but the
previous elseif branch catches addresses that have already run out their
prefered_lft.  This means that if addrconf_verify_rtnl() fails to run in
the necessary time window (i.e. REGEN_ADVANCE time units before the end of
the prefered_lft), the temporary address will never be regenerated, and no
temporary addresses will be available until each one's valid_lft runs out
and manage_tempaddrs() begins anew.

Fix this by moving the entire temporary address regeneration case out of
that block.  That block is supposed to implement the "destructive" part of
an address's lifecycle, and regenerating a fresh temporary address is not,
semantically speaking, actually tied to any particular lifecycle stage.
The age test is also changed from `age >= prefered_lft - regen_advance`
to `age + regen_advance >= prefered_lft` instead, to ensure no underflow
occurs if the system administrator increases the regen_advance to a value
greater than the already-set prefered_lft.

Note that this does not fix the problem of addrconf_verify_rtnl() sometimes
not running in time, resulting in the race condition described in RFC 4941
section 3.4 - it only ensures that the address is regenerated.  Fixing THAT
problem may require either using jiffies instead of seconds for all time
arithmetic here, or always rounding up when regen_advance is converted to
seconds.

Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20220623181103.7033-1-CFSworks@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/addrconf.c | 62 ++++++++++++++++++++++++---------------------
 1 file changed, 33 insertions(+), 29 deletions(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 05317e6f48f8..e11ae0327731 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4513,6 +4513,39 @@ static void addrconf_verify_rtnl(void)
 			/* We try to batch several events at once. */
 			age = (now - ifp->tstamp + ADDRCONF_TIMER_FUZZ_MINUS) / HZ;
 
+			if ((ifp->flags&IFA_F_TEMPORARY) &&
+			    !(ifp->flags&IFA_F_TENTATIVE) &&
+			    ifp->prefered_lft != INFINITY_LIFE_TIME &&
+			    !ifp->regen_count && ifp->ifpub) {
+				/* This is a non-regenerated temporary addr. */
+
+				unsigned long regen_advance = ifp->idev->cnf.regen_max_retry *
+					ifp->idev->cnf.dad_transmits *
+					max(NEIGH_VAR(ifp->idev->nd_parms, RETRANS_TIME), HZ/100) / HZ;
+
+				if (age + regen_advance >= ifp->prefered_lft) {
+					struct inet6_ifaddr *ifpub = ifp->ifpub;
+					if (time_before(ifp->tstamp + ifp->prefered_lft * HZ, next))
+						next = ifp->tstamp + ifp->prefered_lft * HZ;
+
+					ifp->regen_count++;
+					in6_ifa_hold(ifp);
+					in6_ifa_hold(ifpub);
+					spin_unlock(&ifp->lock);
+
+					spin_lock(&ifpub->lock);
+					ifpub->regen_count = 0;
+					spin_unlock(&ifpub->lock);
+					rcu_read_unlock_bh();
+					ipv6_create_tempaddr(ifpub, true);
+					in6_ifa_put(ifpub);
+					in6_ifa_put(ifp);
+					rcu_read_lock_bh();
+					goto restart;
+				} else if (time_before(ifp->tstamp + ifp->prefered_lft * HZ - regen_advance * HZ, next))
+					next = ifp->tstamp + ifp->prefered_lft * HZ - regen_advance * HZ;
+			}
+
 			if (ifp->valid_lft != INFINITY_LIFE_TIME &&
 			    age >= ifp->valid_lft) {
 				spin_unlock(&ifp->lock);
@@ -4544,35 +4577,6 @@ static void addrconf_verify_rtnl(void)
 					in6_ifa_put(ifp);
 					goto restart;
 				}
-			} else if ((ifp->flags&IFA_F_TEMPORARY) &&
-				   !(ifp->flags&IFA_F_TENTATIVE)) {
-				unsigned long regen_advance = ifp->idev->cnf.regen_max_retry *
-					ifp->idev->cnf.dad_transmits *
-					max(NEIGH_VAR(ifp->idev->nd_parms, RETRANS_TIME), HZ/100) / HZ;
-
-				if (age >= ifp->prefered_lft - regen_advance) {
-					struct inet6_ifaddr *ifpub = ifp->ifpub;
-					if (time_before(ifp->tstamp + ifp->prefered_lft * HZ, next))
-						next = ifp->tstamp + ifp->prefered_lft * HZ;
-					if (!ifp->regen_count && ifpub) {
-						ifp->regen_count++;
-						in6_ifa_hold(ifp);
-						in6_ifa_hold(ifpub);
-						spin_unlock(&ifp->lock);
-
-						spin_lock(&ifpub->lock);
-						ifpub->regen_count = 0;
-						spin_unlock(&ifpub->lock);
-						rcu_read_unlock_bh();
-						ipv6_create_tempaddr(ifpub, true);
-						in6_ifa_put(ifpub);
-						in6_ifa_put(ifp);
-						rcu_read_lock_bh();
-						goto restart;
-					}
-				} else if (time_before(ifp->tstamp + ifp->prefered_lft * HZ - regen_advance * HZ, next))
-					next = ifp->tstamp + ifp->prefered_lft * HZ - regen_advance * HZ;
-				spin_unlock(&ifp->lock);
 			} else {
 				/* ifp->prefered_lft <= ifp->valid_lft */
 				if (time_before(ifp->tstamp + ifp->prefered_lft * HZ, next))
-- 
2.35.1

[PATCH AUTOSEL 5.10 29/46] drm/amdgpu/display/dc: Fix null pointer exception

[Sasha Levin]

From: Rahul Kumar <rahul.kumar1@amd.com>

[ Upstream commit 1c4dae3e4639540fb567e570cc56a3c292afb6fe ]

We observed hard hang due to NULL derefrence This issue is seen after
running system all the time after two or three days

struct dc *dc = plane_state->ctx->dc; Randomly in long run we found
plane_state or plane_state->ctx is found NULL which causes exception.

BUG: kernel NULL pointer dereference, address: 0000000000000000
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 1dc7f2067 P4D 1dc7f2067 PUD 222c75067 PMD 0
Oops: 0000 [#1] SMP NOPTI
CPU: 5 PID: 29855 Comm: kworker/u16:4 ...
...
Workqueue: events_unbound commit_work [drm_kms_helper]
RIP: 0010:dcn10_update_pending_status+0x1f/0xee [amdgpu]
Code: 41 5f c3 0f 1f 44 00 00 b0 01 c3 0f 1f 44 00 00 41 55 41 54 55 53 48 8b 1f 4c 8b af f8 00 00 00 48 8b 83 88 03 00 00 48 85 db <4c> 8b 20 0f 84 bf 00 00 00 48 89 fd 48 8b bf b8 00 00 00 48 8b 07
RSP: 0018:ffff942941997ab8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8d7fd98d2000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8d7e3e87c708 RDI: ffff8d7f2d8c0690
RBP: ffff8d7f2d8c0000 R08: ffff942941997a34 R09: 00000000ffffffff
R10: 0000000000005000 R11: 00000000000000f0 R12: ffff8d7f2d8c0690
R13: ffff8d8035a41680 R14: 00000000000186a0 R15: ffff8d7f2d8c1dd8
FS:  0000000000000000(0000) GS:ffff8d8037340000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000148030000 CR4: 00000000003406e0
Call Trace:
 dc_commit_state+0x6a2/0x7f0 [amdgpu]
 amdgpu_dm_atomic_commit_tail+0x460/0x19bb [amdgpu]

Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rahul Kumar <rahul.kumar1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 31a13daf4289..7172ec9a11d2 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -3308,7 +3308,7 @@ void dcn10_update_pending_status(struct pipe_ctx *pipe_ctx)
 	struct dc_plane_state *plane_state = pipe_ctx->plane_state;
 	struct timing_generator *tg = pipe_ctx->stream_res.tg;
 	bool flip_pending;
-	struct dc *dc = plane_state->ctx->dc;
+	struct dc *dc = pipe_ctx->stream->ctx->dc;
 
 	if (plane_state == NULL)
 		return;
-- 
2.35.1

[PATCH AUTOSEL 5.10 29/46] drm/amdgpu/display/dc: Fix null pointer exception

[Sasha Levin]

From: Rahul Kumar <rahul.kumar1@amd.com>

[ Upstream commit 1c4dae3e4639540fb567e570cc56a3c292afb6fe ]

We observed hard hang due to NULL derefrence This issue is seen after
running system all the time after two or three days

struct dc *dc = plane_state->ctx->dc; Randomly in long run we found
plane_state or plane_state->ctx is found NULL which causes exception.

BUG: kernel NULL pointer dereference, address: 0000000000000000
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 1dc7f2067 P4D 1dc7f2067 PUD 222c75067 PMD 0
Oops: 0000 [#1] SMP NOPTI
CPU: 5 PID: 29855 Comm: kworker/u16:4 ...
...
Workqueue: events_unbound commit_work [drm_kms_helper]
RIP: 0010:dcn10_update_pending_status+0x1f/0xee [amdgpu]
Code: 41 5f c3 0f 1f 44 00 00 b0 01 c3 0f 1f 44 00 00 41 55 41 54 55 53 48 8b 1f 4c 8b af f8 00 00 00 48 8b 83 88 03 00 00 48 85 db <4c> 8b 20 0f 84 bf 00 00 00 48 89 fd 48 8b bf b8 00 00 00 48 8b 07
RSP: 0018:ffff942941997ab8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8d7fd98d2000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8d7e3e87c708 RDI: ffff8d7f2d8c0690
RBP: ffff8d7f2d8c0000 R08: ffff942941997a34 R09: 00000000ffffffff
R10: 0000000000005000 R11: 00000000000000f0 R12: ffff8d7f2d8c0690
R13: ffff8d8035a41680 R14: 00000000000186a0 R15: ffff8d7f2d8c1dd8
FS:  0000000000000000(0000) GS:ffff8d8037340000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000148030000 CR4: 00000000003406e0
Call Trace:
 dc_commit_state+0x6a2/0x7f0 [amdgpu]
 amdgpu_dm_atomic_commit_tail+0x460/0x19bb [amdgpu]

Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rahul Kumar <rahul.kumar1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 31a13daf4289..7172ec9a11d2 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -3308,7 +3308,7 @@ void dcn10_update_pending_status(struct pipe_ctx *pipe_ctx)
 	struct dc_plane_state *plane_state = pipe_ctx->plane_state;
 	struct timing_generator *tg = pipe_ctx->stream_res.tg;
 	bool flip_pending;
-	struct dc *dc = plane_state->ctx->dc;
+	struct dc *dc = pipe_ctx->stream->ctx->dc;
 
 	if (plane_state == NULL)
 		return;
-- 
2.35.1

[PATCH AUTOSEL 5.10 29/46] drm/amdgpu/display/dc: Fix null pointer exception

[Sasha Levin]

From: Rahul Kumar <rahul.kumar1@amd.com>

[ Upstream commit 1c4dae3e4639540fb567e570cc56a3c292afb6fe ]

We observed hard hang due to NULL derefrence This issue is seen after
running system all the time after two or three days

struct dc *dc = plane_state->ctx->dc; Randomly in long run we found
plane_state or plane_state->ctx is found NULL which causes exception.

BUG: kernel NULL pointer dereference, address: 0000000000000000
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 1dc7f2067 P4D 1dc7f2067 PUD 222c75067 PMD 0
Oops: 0000 [#1] SMP NOPTI
CPU: 5 PID: 29855 Comm: kworker/u16:4 ...
...
Workqueue: events_unbound commit_work [drm_kms_helper]
RIP: 0010:dcn10_update_pending_status+0x1f/0xee [amdgpu]
Code: 41 5f c3 0f 1f 44 00 00 b0 01 c3 0f 1f 44 00 00 41 55 41 54 55 53 48 8b 1f 4c 8b af f8 00 00 00 48 8b 83 88 03 00 00 48 85 db <4c> 8b 20 0f 84 bf 00 00 00 48 89 fd 48 8b bf b8 00 00 00 48 8b 07
RSP: 0018:ffff942941997ab8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8d7fd98d2000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8d7e3e87c708 RDI: ffff8d7f2d8c0690
RBP: ffff8d7f2d8c0000 R08: ffff942941997a34 R09: 00000000ffffffff
R10: 0000000000005000 R11: 00000000000000f0 R12: ffff8d7f2d8c0690
R13: ffff8d8035a41680 R14: 00000000000186a0 R15: ffff8d7f2d8c1dd8
FS:  0000000000000000(0000) GS:ffff8d8037340000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000148030000 CR4: 00000000003406e0
Call Trace:
 dc_commit_state+0x6a2/0x7f0 [amdgpu]
 amdgpu_dm_atomic_commit_tail+0x460/0x19bb [amdgpu]

Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rahul Kumar <rahul.kumar1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 31a13daf4289..7172ec9a11d2 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -3308,7 +3308,7 @@ void dcn10_update_pending_status(struct pipe_ctx *pipe_ctx)
 	struct dc_plane_state *plane_state = pipe_ctx->plane_state;
 	struct timing_generator *tg = pipe_ctx->stream_res.tg;
 	bool flip_pending;
-	struct dc *dc = plane_state->ctx->dc;
+	struct dc *dc = pipe_ctx->stream->ctx->dc;
 
 	if (plane_state == NULL)
 		return;
-- 
2.35.1

[PATCH AUTOSEL 5.10 30/46] crypto: vmx - Fix warning on p8_ghash_alg

[Sasha Levin]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit cc8166bfc829043020b5cc3b7cdba02a17d03b6d ]

The compiler complains that p8_ghash_alg isn't declared which is
because the header file aesp8-ppc.h isn't included in ghash.c.
This patch fixes the warning.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/vmx/ghash.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/crypto/vmx/ghash.c b/drivers/crypto/vmx/ghash.c
index 14807ac2e3b9..e419be7381c9 100644
--- a/drivers/crypto/vmx/ghash.c
+++ b/drivers/crypto/vmx/ghash.c
@@ -23,6 +23,7 @@
 #include <crypto/internal/hash.h>
 #include <crypto/internal/simd.h>
 #include <crypto/b128ops.h>
+#include "aesp8-ppc.h"
 
 void gcm_init_p8(u128 htable[16], const u64 Xi[2]);
 void gcm_gmult_p8(u64 Xi[2], const u128 htable[16]);
-- 
2.35.1

[PATCH AUTOSEL 5.10 30/46] crypto: vmx - Fix warning on p8_ghash_alg

[Sasha Levin]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit cc8166bfc829043020b5cc3b7cdba02a17d03b6d ]

The compiler complains that p8_ghash_alg isn't declared which is
because the header file aesp8-ppc.h isn't included in ghash.c.
This patch fixes the warning.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/vmx/ghash.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/crypto/vmx/ghash.c b/drivers/crypto/vmx/ghash.c
index 14807ac2e3b9..e419be7381c9 100644
--- a/drivers/crypto/vmx/ghash.c
+++ b/drivers/crypto/vmx/ghash.c
@@ -23,6 +23,7 @@
 #include <crypto/internal/hash.h>
 #include <crypto/internal/simd.h>
 #include <crypto/b128ops.h>
+#include "aesp8-ppc.h"
 
 void gcm_init_p8(u128 htable[16], const u64 Xi[2]);
 void gcm_gmult_p8(u64 Xi[2], const u128 htable[16]);
-- 
2.35.1

[Nouveau] [PATCH AUTOSEL 5.10 31/46] drm/nouveau/nvkm: use list_add_tail() when building object tree

[Sasha Levin]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 61c1f340bc809a1ca1e3c8794207a91cde1a7c78 ]

Fixes resume from hibernate failing on (at least) TU102, where cursor
channel init failed due to being performed before the core channel.

Not solid idea why suspend-to-ram worked, but, presumably HW being in
an entirely clean state has something to do with it.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/core/ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/core/ioctl.c b/drivers/gpu/drm/nouveau/nvkm/core/ioctl.c
index d777df5a64e6..2aa0d6fed580 100644
--- a/drivers/gpu/drm/nouveau/nvkm/core/ioctl.c
+++ b/drivers/gpu/drm/nouveau/nvkm/core/ioctl.c
@@ -128,7 +128,7 @@ nvkm_ioctl_new(struct nvkm_client *client,
 	if (ret == 0) {
 		ret = nvkm_object_init(object);
 		if (ret == 0) {
-			list_add(&object->head, &parent->tree);
+			list_add_tail(&object->head, &parent->tree);
 			if (nvkm_object_insert(object)) {
 				client->data = object;
 				return 0;
-- 
2.35.1

[PATCH AUTOSEL 5.10 31/46] drm/nouveau/nvkm: use list_add_tail() when building object tree

[Sasha Levin]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 61c1f340bc809a1ca1e3c8794207a91cde1a7c78 ]

Fixes resume from hibernate failing on (at least) TU102, where cursor
channel init failed due to being performed before the core channel.

Not solid idea why suspend-to-ram worked, but, presumably HW being in
an entirely clean state has something to do with it.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/core/ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/core/ioctl.c b/drivers/gpu/drm/nouveau/nvkm/core/ioctl.c
index d777df5a64e6..2aa0d6fed580 100644
--- a/drivers/gpu/drm/nouveau/nvkm/core/ioctl.c
+++ b/drivers/gpu/drm/nouveau/nvkm/core/ioctl.c
@@ -128,7 +128,7 @@ nvkm_ioctl_new(struct nvkm_client *client,
 	if (ret == 0) {
 		ret = nvkm_object_init(object);
 		if (ret == 0) {
-			list_add(&object->head, &parent->tree);
+			list_add_tail(&object->head, &parent->tree);
 			if (nvkm_object_insert(object)) {
 				client->data = object;
 				return 0;
-- 
2.35.1

[PATCH AUTOSEL 5.10 31/46] drm/nouveau/nvkm: use list_add_tail() when building object tree

[Sasha Levin]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 61c1f340bc809a1ca1e3c8794207a91cde1a7c78 ]

Fixes resume from hibernate failing on (at least) TU102, where cursor
channel init failed due to being performed before the core channel.

Not solid idea why suspend-to-ram worked, but, presumably HW being in
an entirely clean state has something to do with it.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/core/ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/core/ioctl.c b/drivers/gpu/drm/nouveau/nvkm/core/ioctl.c
index d777df5a64e6..2aa0d6fed580 100644
--- a/drivers/gpu/drm/nouveau/nvkm/core/ioctl.c
+++ b/drivers/gpu/drm/nouveau/nvkm/core/ioctl.c
@@ -128,7 +128,7 @@ nvkm_ioctl_new(struct nvkm_client *client,
 	if (ret == 0) {
 		ret = nvkm_object_init(object);
 		if (ret == 0) {
-			list_add(&object->head, &parent->tree);
+			list_add_tail(&object->head, &parent->tree);
 			if (nvkm_object_insert(object)) {
 				client->data = object;
 				return 0;
-- 
2.35.1

[PATCH AUTOSEL 5.10 32/46] crypto: ccree - Add missing clk_disable_unprepare() in cc_pm_resume()

[Sasha Levin]

From: Yuan Can <yuancan@huawei.com>

[ Upstream commit 30fb034361ff1b9bfc569b2d8d66b544ea3eb18f ]

Add clk_disable_unprepare() on error path in cc_pm_resume().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ccree/cc_pm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/crypto/ccree/cc_pm.c b/drivers/crypto/ccree/cc_pm.c
index 3c65bf070c90..f712689bc98d 100644
--- a/drivers/crypto/ccree/cc_pm.c
+++ b/drivers/crypto/ccree/cc_pm.c
@@ -41,6 +41,7 @@ static int cc_pm_resume(struct device *dev)
 	/* wait for Cryptocell reset completion */
 	if (!cc_wait_for_reset_completion(drvdata)) {
 		dev_err(dev, "Cryptocell reset not completed");
+		clk_disable_unprepare(drvdata->clk);
 		return -EBUSY;
 	}
 
@@ -48,6 +49,7 @@ static int cc_pm_resume(struct device *dev)
 	rc = init_cc_regs(drvdata, false);
 	if (rc) {
 		dev_err(dev, "init_cc_regs (%x)\n", rc);
+		clk_disable_unprepare(drvdata->clk);
 		return rc;
 	}
 	/* check if tee fips error occurred during power down */
-- 
2.35.1

[PATCH AUTOSEL 5.10 33/46] bpf: Fix check against plain integer v 'NULL'

[Sasha Levin]

From: Ben Dooks <ben.dooks@sifive.com>

[ Upstream commit a2a5580fcbf808e7c2310e4959b62f9d2157fdb6 ]

When checking with sparse, btf_show_type_value() is causing a
warning about checking integer vs NULL when the macro is passed
a pointer, due to the 'value != 0' check. Stop sparse complaining
about any type-casting by adding a cast to the typeof(value).

This fixes the following sparse warnings:

kernel/bpf/btf.c:2579:17: warning: Using plain integer as NULL pointer
kernel/bpf/btf.c:2581:17: warning: Using plain integer as NULL pointer
kernel/bpf/btf.c:3407:17: warning: Using plain integer as NULL pointer
kernel/bpf/btf.c:3758:9: warning: Using plain integer as NULL pointer

Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220714100322.260467-1-ben.dooks@sifive.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/btf.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index dc497eaf2266..52b712caa746 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -972,7 +972,8 @@ __printf(2, 3) static void btf_show(struct btf_show *show, const char *fmt, ...)
  */
 #define btf_show_type_value(show, fmt, value)				       \
 	do {								       \
-		if ((value) != 0 || (show->flags & BTF_SHOW_ZERO) ||	       \
+		if ((value) != (__typeof__(value))0 ||			       \
+		    (show->flags & BTF_SHOW_ZERO) ||			       \
 		    show->state.depth == 0) {				       \
 			btf_show(show, "%s%s" fmt "%s%s",		       \
 				 btf_show_indent(show),			       \
-- 
2.35.1

[PATCH AUTOSEL 5.10 34/46] media: rkisp1: Disable runtime PM in probe error path

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit 13c9810281f8b24af9b7712cd84a1fce61843e93 ]

If the v4l2_device_register() call fails, runtime PM is left enabled.
Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/rkisp1/rkisp1-dev.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/rkisp1/rkisp1-dev.c b/drivers/staging/media/rkisp1/rkisp1-dev.c
index 06de5540c8af..663b2efec9b0 100644
--- a/drivers/staging/media/rkisp1/rkisp1-dev.c
+++ b/drivers/staging/media/rkisp1/rkisp1-dev.c
@@ -518,7 +518,7 @@ static int rkisp1_probe(struct platform_device *pdev)
 
 	ret = v4l2_device_register(rkisp1->dev, &rkisp1->v4l2_dev);
 	if (ret)
-		return ret;
+		goto err_pm_runtime_disable;
 
 	ret = media_device_register(&rkisp1->media_dev);
 	if (ret) {
@@ -538,6 +538,7 @@ static int rkisp1_probe(struct platform_device *pdev)
 	media_device_unregister(&rkisp1->media_dev);
 err_unreg_v4l2_dev:
 	v4l2_device_unregister(&rkisp1->v4l2_dev);
+err_pm_runtime_disable:
 	pm_runtime_disable(&pdev->dev);
 	return ret;
 }
-- 
2.35.1

[PATCH AUTOSEL 5.10 35/46] bpf: Don't redirect packets with invalid pkt_len

[Sasha Levin]

From: Zhengchao Shao <shaozhengchao@huawei.com>

[ Upstream commit fd1894224407c484f652ad456e1ce423e89bb3eb ]

Syzbot found an issue [1]: fq_codel_drop() try to drop a flow whitout any
skbs, that is, the flow->head is null.
The root cause, as the [2] says, is because that bpf_prog_test_run_skb()
run a bpf prog which redirects empty skbs.
So we should determine whether the length of the packet modified by bpf
prog or others like bpf_prog_test is valid before forwarding it directly.

LINK: [1] https://syzkaller.appspot.com/bug?id=0b84da80c2917757915afa89f7738a9d16ec96c5
LINK: [2] https://www.spinics.net/lists/netdev/msg777503.html

Reported-by: syzbot+7a12909485b94426aceb@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220715115559.139691-1-shaozhengchao@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/skbuff.h | 8 ++++++++
 net/bpf/test_run.c     | 3 +++
 net/core/dev.c         | 1 +
 3 files changed, 12 insertions(+)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index acbf1875ad50..61fc053a4a4e 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2222,6 +2222,14 @@ static inline void skb_set_tail_pointer(struct sk_buff *skb, const int offset)
 
 #endif /* NET_SKBUFF_DATA_USES_OFFSET */
 
+static inline void skb_assert_len(struct sk_buff *skb)
+{
+#ifdef CONFIG_DEBUG_NET
+	if (WARN_ONCE(!skb->len, "%s\n", __func__))
+		DO_ONCE_LITE(skb_dump, KERN_ERR, skb, false);
+#endif /* CONFIG_DEBUG_NET */
+}
+
 /*
  *	Add data to an sk_buff
  */
diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c
index eb684f31fd69..da13adac0fdc 100644
--- a/net/bpf/test_run.c
+++ b/net/bpf/test_run.c
@@ -398,6 +398,9 @@ static int convert___skb_to_skb(struct sk_buff *skb, struct __sk_buff *__skb)
 {
 	struct qdisc_skb_cb *cb = (struct qdisc_skb_cb *)skb->cb;
 
+	if (!skb->len)
+		return -EINVAL;
+
 	if (!__skb)
 		return 0;
 
diff --git a/net/core/dev.c b/net/core/dev.c
index 637bc576fbd2..dd0070b0d1e2 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4097,6 +4097,7 @@ static int __dev_queue_xmit(struct sk_buff *skb, struct net_device *sb_dev)
 	bool again = false;
 
 	skb_reset_mac_header(skb);
+	skb_assert_len(skb);
 
 	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SCHED_TSTAMP))
 		__skb_tstamp_tx(skb, NULL, skb->sk, SCM_TSTAMP_SCHED);
-- 
2.35.1

[PATCH AUTOSEL 5.10 36/46] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller

[Sasha Levin]

From: Biju Das <biju.das.jz@bp.renesas.com>

[ Upstream commit 2d99bfbf3386962692dcccd73931cb0db07a1a43 ]

As per Chapter 6.5.16 of the RZ/N1 Peripheral Manual, The SJA1000
CAN controller does not support Clock Divider Register compared to
the reference Philips SJA1000 device.

This patch adds a device quirk to handle this difference.

Link: https://lore.kernel.org/all/20220710115248.190280-4-biju.das.jz@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/sja1000/sja1000.c | 8 +++++---
 drivers/net/can/sja1000/sja1000.h | 3 ++-
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 25a4d7d0b349..3f2667c07dc3 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -184,8 +184,9 @@ static void chipset_init(struct net_device *dev)
 {
 	struct sja1000_priv *priv = netdev_priv(dev);
 
-	/* set clock divider and output control register */
-	priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
+	if (!(priv->flags & SJA1000_QUIRK_NO_CDR_REG))
+		/* set clock divider and output control register */
+		priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
 
 	/* set acceptance filter (accept all) */
 	priv->write_reg(priv, SJA1000_ACCC0, 0x00);
@@ -210,7 +211,8 @@ static void sja1000_start(struct net_device *dev)
 		set_reset_mode(dev);
 
 	/* Initialize chip if uninitialized at this stage */
-	if (!(priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN))
+	if (!(priv->flags & SJA1000_QUIRK_NO_CDR_REG ||
+	      priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN))
 		chipset_init(dev);
 
 	/* Clear error counters and error code capture */
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index 9d46398f8154..7f736f1df547 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -145,7 +145,8 @@
 /*
  * Flags for sja1000priv.flags
  */
-#define SJA1000_CUSTOM_IRQ_HANDLER 0x1
+#define SJA1000_CUSTOM_IRQ_HANDLER	BIT(0)
+#define SJA1000_QUIRK_NO_CDR_REG	BIT(1)
 
 /*
  * SJA1000 private data structure
-- 
2.35.1

[PATCH AUTOSEL 5.10 37/46] net/cdc_ncm: Increase NTB max RX/TX values to 64kb

[Sasha Levin]

From: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>

[ Upstream commit 5588d628027092e66195097bdf6835ddf64418b3 ]

DisplayLink ethernet devices require NTB buffers larger then 32kb
in order to run with highest performance.

This patch is changing upper limit of the rx and tx buffers.
Those buffers are initialized with CDC_NCM_NTB_DEF_SIZE_RX and
CDC_NCM_NTB_DEF_SIZE_TX which is 16kb so by default no device is
affected by increased limit.

Rx and tx buffer is increased under two conditions:
 - Device need to advertise that it supports higher buffer size in
   dwNtbMaxInMaxSize and dwNtbMaxOutMaxSize.
 - cdc_ncm/rx_max and cdc_ncm/tx_max driver parameters must be adjusted
   with udev rule or ethtool.

Summary of testing and performance results:
Tests were performed on following devices:
 - DisplayLink DL-3xxx family device
 - DisplayLink DL-6xxx family device
 - ASUS USB-C2500 2.5G USB3 ethernet adapter
 - Plugable USB3 1G USB3 ethernet adapter
 - EDIMAX EU-4307 USB-C ethernet adapter
 - Dell DBQBCBC064 USB-C ethernet adapter

Performance measurements were done with:
 - iperf3 between two linux boxes
 - http://openspeedtest.com/ instance running on local test machine

Insights from tests results:
 - All except one from third party usb adapters were not affected by
   increased buffer size to their advertised dwNtbOutMaxSize and
   dwNtbInMaxSize.
   Devices were generally reaching 912-940Mbps both download and upload.

   Only EDIMAX adapter experienced decreased download size from
   929Mbps to 827Mbps with iper3, with openspeedtest decrease was from
   968Mbps to 886Mbps.

 - DisplayLink DL-3xxx family devices experienced performance increase
   with iperf3 download from 300Mbps to 870Mbps and
   upload from 782Mbps to 844Mbps.
   With openspeedtest download increased from 556Mbps to 873Mbps
   and upload from 727Mbps to 973Mbps

 - DiplayLink DL-6xxx family devices are not affected by
   increased buffer size.

Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220720060518.541-2-lukasz.spintzyk@synaptics.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/usb/cdc_ncm.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h
index 0ce4377545f8..20a8ab9272d8 100644
--- a/include/linux/usb/cdc_ncm.h
+++ b/include/linux/usb/cdc_ncm.h
@@ -53,8 +53,8 @@
 #define USB_CDC_NCM_NDP32_LENGTH_MIN		0x20
 
 /* Maximum NTB length */
-#define	CDC_NCM_NTB_MAX_SIZE_TX			32768	/* bytes */
-#define	CDC_NCM_NTB_MAX_SIZE_RX			32768	/* bytes */
+#define	CDC_NCM_NTB_MAX_SIZE_TX			65536	/* bytes */
+#define	CDC_NCM_NTB_MAX_SIZE_RX			65536	/* bytes */
 
 /* Initial NTB length */
 #define	CDC_NCM_NTB_DEF_SIZE_TX			16384	/* bytes */
-- 
2.35.1

[PATCH AUTOSEL 5.10 38/46] Bluetooth: hci_bcm: Add BCM4349B1 variant

[Sasha Levin]

From: Ahmad Fatoum <a.fatoum@pengutronix.de>

[ Upstream commit 4f17c2b6694d0c4098f33b07ee3a696976940aa5 ]

The BCM4349B1, aka CYW/BCM89359, is a WiFi+BT chip and its Bluetooth
portion can be controlled over serial.

Two subversions are added for the chip, because ROM firmware reports
002.002.013 (at least for the chips I have here), while depending on
patchram firmware revision, either 002.002.013 or 002.002.014 is
reported.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btbcm.c   | 2 ++
 drivers/bluetooth/hci_bcm.c | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 1b9743b7f2ef..d263eac784da 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -401,6 +401,8 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x6606, "BCM4345C5"	},	/* 003.006.006 */
 	{ 0x230f, "BCM4356A2"	},	/* 001.003.015 */
 	{ 0x220e, "BCM20702A1"  },	/* 001.002.014 */
+	{ 0x420d, "BCM4349B1"	},	/* 002.002.013 */
+	{ 0x420e, "BCM4349B1"	},	/* 002.002.014 */
 	{ 0x4217, "BCM4329B1"   },	/* 002.002.023 */
 	{ 0x6106, "BCM4359C0"	},	/* 003.001.006 */
 	{ 0x4106, "BCM4335A0"	},	/* 002.001.006 */
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 259a643377c2..574f84708859 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1489,6 +1489,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = {
 	{ .compatible = "brcm,bcm4345c5" },
 	{ .compatible = "brcm,bcm4330-bt" },
 	{ .compatible = "brcm,bcm43438-bt", .data = &bcm43438_device_data },
+	{ .compatible = "brcm,bcm4349-bt", .data = &bcm43438_device_data },
 	{ .compatible = "brcm,bcm43540-bt", .data = &bcm4354_device_data },
 	{ .compatible = "brcm,bcm4335a0" },
 	{ },
-- 
2.35.1

[PATCH AUTOSEL 5.10 39/46] Bluetooth: Collect kcov coverage from hci_rx_work

[Sasha Levin]

From: Tamas Koczka <poprdi@google.com>

[ Upstream commit 9f30de9e0343da05ac621b5817e9b1ce303c6310 ]

Annotate hci_rx_work() with kcov_remote_start() and kcov_remote_stop()
calls, so remote KCOV coverage is collected while processing the rx_q
queue which is the main incoming Bluetooth packet queue.

Coverage is associated with the thread which created the packet skb.

The collected extra coverage helps kernel fuzzing efforts in finding
vulnerabilities.

This change only has effect if the kernel is compiled with CONFIG_KCOV,
otherwise kcov_ functions don't do anything.

Signed-off-by: Tamas Koczka <poprdi@google.com>
Tested-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 2cb0cf035476..2661a2a7937b 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -29,6 +29,7 @@
 #include <linux/rfkill.h>
 #include <linux/debugfs.h>
 #include <linux/crypto.h>
+#include <linux/kcov.h>
 #include <linux/property.h>
 #include <linux/suspend.h>
 #include <linux/wait.h>
@@ -4909,7 +4910,14 @@ static void hci_rx_work(struct work_struct *work)
 
 	BT_DBG("%s", hdev->name);
 
-	while ((skb = skb_dequeue(&hdev->rx_q))) {
+	/* The kcov_remote functions used for collecting packet parsing
+	 * coverage information from this background thread and associate
+	 * the coverage with the syscall's thread which originally injected
+	 * the packet. This helps fuzzing the kernel.
+	 */
+	for (; (skb = skb_dequeue(&hdev->rx_q)); kcov_remote_stop()) {
+		kcov_remote_start_common(skb_get_kcov_handle(skb));
+
 		/* Send copy to monitor */
 		hci_send_to_monitor(hdev, skb);
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 40/46] bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test

[Sasha Levin]

From: Jie2x Zhou <jie2x.zhou@intel.com>

[ Upstream commit f664f9c6b4a1bb9a10af812df0fbbf6aac28fcc6 ]

Before change:

  selftests: bpf: test_xdp_veth.sh
  Couldn't retrieve pinned program '/sys/fs/bpf/test_xdp_veth/progs/redirect_map_0': No such file or directory
  selftests: xdp_veth [SKIP]
  ok 20 selftests: bpf: test_xdp_veth.sh # SKIP

After change:

  PING 10.1.1.33 (10.1.1.33) 56(84) bytes of data.
  64 bytes from 10.1.1.33: icmp_seq=1 ttl=64 time=0.320 ms
  --- 10.1.1.33 ping statistics ---
  1 packets transmitted, 1 received, 0% packet loss, time 0ms
  rtt min/avg/max/mdev = 0.320/0.320/0.320/0.000 ms
  selftests: xdp_veth [PASS]

For the test case, the following can be found:

  ls /sys/fs/bpf/test_xdp_veth/progs/redirect_map_0
  ls: cannot access '/sys/fs/bpf/test_xdp_veth/progs/redirect_map_0': No such file or directory
  ls /sys/fs/bpf/test_xdp_veth/progs/
  xdp_redirect_map_0  xdp_redirect_map_1  xdp_redirect_map_2

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220719082430.9916-1-jie2x.zhou@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_xdp_veth.sh | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_xdp_veth.sh b/tools/testing/selftests/bpf/test_xdp_veth.sh
index 995278e684b6..f2ad31558963 100755
--- a/tools/testing/selftests/bpf/test_xdp_veth.sh
+++ b/tools/testing/selftests/bpf/test_xdp_veth.sh
@@ -103,9 +103,9 @@ bpftool prog loadall \
 bpftool map update pinned $BPF_DIR/maps/tx_port key 0 0 0 0 value 122 0 0 0
 bpftool map update pinned $BPF_DIR/maps/tx_port key 1 0 0 0 value 133 0 0 0
 bpftool map update pinned $BPF_DIR/maps/tx_port key 2 0 0 0 value 111 0 0 0
-ip link set dev veth1 xdp pinned $BPF_DIR/progs/redirect_map_0
-ip link set dev veth2 xdp pinned $BPF_DIR/progs/redirect_map_1
-ip link set dev veth3 xdp pinned $BPF_DIR/progs/redirect_map_2
+ip link set dev veth1 xdp pinned $BPF_DIR/progs/xdp_redirect_map_0
+ip link set dev veth2 xdp pinned $BPF_DIR/progs/xdp_redirect_map_1
+ip link set dev veth3 xdp pinned $BPF_DIR/progs/xdp_redirect_map_2
 
 ip -n ns1 link set dev veth11 xdp obj xdp_dummy.o sec xdp_dummy
 ip -n ns2 link set dev veth22 xdp obj xdp_tx.o sec xdp
-- 
2.35.1

[PATCH AUTOSEL 5.10 41/46] net: ethernet: stmicro: stmmac: first disable all queues and disconnect in release

[Sasha Levin]

From: Christian Marangi <ansuelsmth@gmail.com>

[ Upstream commit 7028471edb646bfc532fec0973e50e784cdcb7c6 ]

Disable all queues and disconnect before tx_disable in stmmac_release to
prevent a corner case where packet may be still queued at the same time
tx_disable is called resulting in kernel panic if some packet still has
to be processed.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 27b7bb64a028..46c2db220542 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3001,6 +3001,8 @@ static int stmmac_release(struct net_device *dev)
 	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
 		del_timer_sync(&priv->tx_queue[chan].txtimer);
 
+	netif_tx_disable(dev);
+
 	/* Free the IRQ lines */
 	free_irq(dev->irq, dev);
 	if (priv->wol_irq != dev->irq)
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 41/46] net: ethernet: stmicro: stmmac: first disable all queues and disconnect in release

[Sasha Levin]

From: Christian Marangi <ansuelsmth@gmail.com>

[ Upstream commit 7028471edb646bfc532fec0973e50e784cdcb7c6 ]

Disable all queues and disconnect before tx_disable in stmmac_release to
prevent a corner case where packet may be still queued at the same time
tx_disable is called resulting in kernel panic if some packet still has
to be processed.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 27b7bb64a028..46c2db220542 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3001,6 +3001,8 @@ static int stmmac_release(struct net_device *dev)
 	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
 		del_timer_sync(&priv->tx_queue[chan].txtimer);
 
+	netif_tx_disable(dev);
+
 	/* Free the IRQ lines */
 	free_irq(dev->irq, dev);
 	if (priv->wol_irq != dev->irq)
-- 
2.35.1

[PATCH AUTOSEL 5.10 42/46] wifi: rtl8xxxu: Fix the error handling of the probe function

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 13876f2a087ad352bf640a7a0a4a4229ea6e9e4f ]

When the driver fails at ieee80211_alloc_hw() at the probe time, the
driver will free the 'hw' which is not allocated, causing a bug.

The following log can reveal it:

[   15.981294] BUG: KASAN: user-memory-access in mutex_is_locked+0xe/0x40
[   15.981558] Read of size 8 at addr 0000000000001ab0 by task modprobe/373
[   15.982583] Call Trace:
[   15.984282]  ieee80211_free_hw+0x22/0x390
[   15.984446]  rtl8xxxu_probe+0x3a1/0xab30 [rtl8xxxu]

Fix the bug by changing the order of the error handling.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220716130444.2950690-1-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 21 ++++++++++---------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 0d374a294840..1d4ff9f6cbf4 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -6606,7 +6606,7 @@ static int rtl8xxxu_probe(struct usb_interface *interface,
 	if (!hw) {
 		ret = -ENOMEM;
 		priv = NULL;
-		goto exit;
+		goto err_put_dev;
 	}
 
 	priv = hw->priv;
@@ -6629,24 +6629,24 @@ static int rtl8xxxu_probe(struct usb_interface *interface,
 
 	ret = rtl8xxxu_parse_usb(priv, interface);
 	if (ret)
-		goto exit;
+		goto err_set_intfdata;
 
 	ret = rtl8xxxu_identify_chip(priv);
 	if (ret) {
 		dev_err(&udev->dev, "Fatal - failed to identify chip\n");
-		goto exit;
+		goto err_set_intfdata;
 	}
 
 	ret = rtl8xxxu_read_efuse(priv);
 	if (ret) {
 		dev_err(&udev->dev, "Fatal - failed to read EFuse\n");
-		goto exit;
+		goto err_set_intfdata;
 	}
 
 	ret = priv->fops->parse_efuse(priv);
 	if (ret) {
 		dev_err(&udev->dev, "Fatal - failed to parse EFuse\n");
-		goto exit;
+		goto err_set_intfdata;
 	}
 
 	rtl8xxxu_print_chipinfo(priv);
@@ -6654,12 +6654,12 @@ static int rtl8xxxu_probe(struct usb_interface *interface,
 	ret = priv->fops->load_firmware(priv);
 	if (ret) {
 		dev_err(&udev->dev, "Fatal - failed to load firmware\n");
-		goto exit;
+		goto err_set_intfdata;
 	}
 
 	ret = rtl8xxxu_init_device(hw);
 	if (ret)
-		goto exit;
+		goto err_set_intfdata;
 
 	hw->wiphy->max_scan_ssids = 1;
 	hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
@@ -6709,12 +6709,12 @@ static int rtl8xxxu_probe(struct usb_interface *interface,
 	if (ret) {
 		dev_err(&udev->dev, "%s: Failed to register: %i\n",
 			__func__, ret);
-		goto exit;
+		goto err_set_intfdata;
 	}
 
 	return 0;
 
-exit:
+err_set_intfdata:
 	usb_set_intfdata(interface, NULL);
 
 	if (priv) {
@@ -6722,9 +6722,10 @@ static int rtl8xxxu_probe(struct usb_interface *interface,
 		mutex_destroy(&priv->usb_buf_mutex);
 		mutex_destroy(&priv->h2c_mutex);
 	}
-	usb_put_dev(udev);
 
 	ieee80211_free_hw(hw);
+err_put_dev:
+	usb_put_dev(udev);
 
 	return ret;
 }
-- 
2.35.1

Re: [PATCH AUTOSEL 5.10 01/46] drm/r128: Fix undefined behavior due to shift overflowing the constant

[Pavel Machek]

Hi!

In this series, I only received patches up-to 42/46. Is problem at sender or receiver?

Best regards,
									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: [PATCH AUTOSEL 5.10 01/46] drm/r128: Fix undefined behavior due to shift overflowing the constant

[Pavel Machek]

Hi!

In this series, I only received patches up-to 42/46. Is problem at sender or receiver?

Best regards,
									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html