From: Amjad Ouled-Ameur <aouledameur@baylibre.com> To: Rob Herring <robh+dt@kernel.org> Cc: Amjad Ouled-Ameur <aouledameur@baylibre.com>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Matthias Brugger <matthias.bgg@gmail.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Date: Wed, 14 Sep 2022 15:12:19 +0200 [thread overview] Message-ID: <20220914131219.18236-1-aouledameur@baylibre.com> (raw) Subject: [PATCH] arm64: dts: mediatek: mt8183: remove thermal zones without trips. Thermal zones without trip point are not registered by thermal core. tzts1 ~ tzts6 zones of mt8183 were intially introduced for test-purpose only but are not supposed to remain on DT. Remove the zones above and keep only cpu_thermal. Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 57 ------------------------ 1 file changed, 57 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 9d32871973a2..f65fae8939de 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1182,63 +1182,6 @@ THERMAL_NO_LIMIT }; }; }; - - /* The tzts1 ~ tzts6 don't need to polling */ - /* The tzts1 ~ tzts6 don't need to thermal throttle */ - - tzts1: tzts1 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 1>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tzts2: tzts2 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 2>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tzts3: tzts3 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 3>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tzts4: tzts4 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 4>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tzts5: tzts5 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 5>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tztsABB: tztsABB { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 6>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; }; pwm0: pwm@1100e000 { -- 2.37.3
WARNING: multiple messages have this Message-ID (diff)
From: Amjad Ouled-Ameur <aouledameur@baylibre.com> To: Rob Herring <robh+dt@kernel.org> Cc: Amjad Ouled-Ameur <aouledameur@baylibre.com>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Matthias Brugger <matthias.bgg@gmail.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Date: Wed, 14 Sep 2022 15:12:19 +0200 [thread overview] Message-ID: <20220914131219.18236-1-aouledameur@baylibre.com> (raw) Subject: [PATCH] arm64: dts: mediatek: mt8183: remove thermal zones without trips. Thermal zones without trip point are not registered by thermal core. tzts1 ~ tzts6 zones of mt8183 were intially introduced for test-purpose only but are not supposed to remain on DT. Remove the zones above and keep only cpu_thermal. Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 57 ------------------------ 1 file changed, 57 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 9d32871973a2..f65fae8939de 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1182,63 +1182,6 @@ THERMAL_NO_LIMIT }; }; }; - - /* The tzts1 ~ tzts6 don't need to polling */ - /* The tzts1 ~ tzts6 don't need to thermal throttle */ - - tzts1: tzts1 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 1>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tzts2: tzts2 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 2>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tzts3: tzts3 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 3>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tzts4: tzts4 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 4>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tzts5: tzts5 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 5>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tztsABB: tztsABB { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 6>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; }; pwm0: pwm@1100e000 { -- 2.37.3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-09-14 13:13 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-14 13:12 Amjad Ouled-Ameur [this message] 2022-09-14 13:12 ` Amjad Ouled-Ameur 2022-09-14 13:18 ` Amjad Ouled-Ameur 2022-09-14 13:18 ` Re: Amjad Ouled-Ameur
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220914131219.18236-1-aouledameur@baylibre.com \ --to=aouledameur@baylibre.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=matthias.bgg@gmail.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.