* (no subject)
@ 2022-09-14 13:12 ` Amjad Ouled-Ameur
0 siblings, 0 replies; 4+ messages in thread
From: Amjad Ouled-Ameur @ 2022-09-14 13:12 UTC (permalink / raw)
To: Rob Herring
Cc: Amjad Ouled-Ameur, Krzysztof Kozlowski, Matthias Brugger,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel
Subject: [PATCH] arm64: dts: mediatek: mt8183: remove thermal zones without
trips.
Thermal zones without trip point are not registered by thermal core.
tzts1 ~ tzts6 zones of mt8183 were intially introduced for test-purpose
only but are not supposed to remain on DT.
Remove the zones above and keep only cpu_thermal.
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 57 ------------------------
1 file changed, 57 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 9d32871973a2..f65fae8939de 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1182,63 +1182,6 @@ THERMAL_NO_LIMIT
};
};
};
-
- /* The tzts1 ~ tzts6 don't need to polling */
- /* The tzts1 ~ tzts6 don't need to thermal throttle */
-
- tzts1: tzts1 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 1>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts2: tzts2 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 2>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts3: tzts3 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 3>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts4: tzts4 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 4>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts5: tzts5 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 5>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tztsABB: tztsABB {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 6>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
};
pwm0: pwm@1100e000 {
--
2.37.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* (no subject)
@ 2022-09-14 13:12 ` Amjad Ouled-Ameur
0 siblings, 0 replies; 4+ messages in thread
From: Amjad Ouled-Ameur @ 2022-09-14 13:12 UTC (permalink / raw)
To: Rob Herring
Cc: Amjad Ouled-Ameur, Krzysztof Kozlowski, Matthias Brugger,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel
Subject: [PATCH] arm64: dts: mediatek: mt8183: remove thermal zones without
trips.
Thermal zones without trip point are not registered by thermal core.
tzts1 ~ tzts6 zones of mt8183 were intially introduced for test-purpose
only but are not supposed to remain on DT.
Remove the zones above and keep only cpu_thermal.
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 57 ------------------------
1 file changed, 57 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 9d32871973a2..f65fae8939de 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1182,63 +1182,6 @@ THERMAL_NO_LIMIT
};
};
};
-
- /* The tzts1 ~ tzts6 don't need to polling */
- /* The tzts1 ~ tzts6 don't need to thermal throttle */
-
- tzts1: tzts1 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 1>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts2: tzts2 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 2>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts3: tzts3 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 3>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts4: tzts4 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 4>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts5: tzts5 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 5>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tztsABB: tztsABB {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 6>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
};
pwm0: pwm@1100e000 {
--
2.37.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re:
2022-09-14 13:12 ` Amjad Ouled-Ameur
@ 2022-09-14 13:18 ` Amjad Ouled-Ameur
-1 siblings, 0 replies; 4+ messages in thread
From: Amjad Ouled-Ameur @ 2022-09-14 13:18 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, Matthias Brugger, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel
Hi,
The subject has not been parsed correctly, I resent a proper patch here:
https://patchwork.kernel.org/project/linux-mediatek/patch/20220914131339.18348-1-aouledameur@baylibre.com/
Sorry for the noise.
Regards,
Amjad
On 9/14/22 15:12, Amjad Ouled-Ameur wrote:
> Subject: [PATCH] arm64: dts: mediatek: mt8183: remove thermal zones without
> trips.
>
> Thermal zones without trip point are not registered by thermal core.
>
> tzts1 ~ tzts6 zones of mt8183 were intially introduced for test-purpose
> only but are not supposed to remain on DT.
>
> Remove the zones above and keep only cpu_thermal.
>
> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 57 ------------------------
> 1 file changed, 57 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 9d32871973a2..f65fae8939de 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -1182,63 +1182,6 @@ THERMAL_NO_LIMIT
> };
> };
> };
> -
> - /* The tzts1 ~ tzts6 don't need to polling */
> - /* The tzts1 ~ tzts6 don't need to thermal throttle */
> -
> - tzts1: tzts1 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 1>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tzts2: tzts2 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 2>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tzts3: tzts3 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 3>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tzts4: tzts4 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 4>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tzts5: tzts5 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 5>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tztsABB: tztsABB {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 6>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> };
>
> pwm0: pwm@1100e000 {
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re:
@ 2022-09-14 13:18 ` Amjad Ouled-Ameur
0 siblings, 0 replies; 4+ messages in thread
From: Amjad Ouled-Ameur @ 2022-09-14 13:18 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, Matthias Brugger, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel
Hi,
The subject has not been parsed correctly, I resent a proper patch here:
https://patchwork.kernel.org/project/linux-mediatek/patch/20220914131339.18348-1-aouledameur@baylibre.com/
Sorry for the noise.
Regards,
Amjad
On 9/14/22 15:12, Amjad Ouled-Ameur wrote:
> Subject: [PATCH] arm64: dts: mediatek: mt8183: remove thermal zones without
> trips.
>
> Thermal zones without trip point are not registered by thermal core.
>
> tzts1 ~ tzts6 zones of mt8183 were intially introduced for test-purpose
> only but are not supposed to remain on DT.
>
> Remove the zones above and keep only cpu_thermal.
>
> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 57 ------------------------
> 1 file changed, 57 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 9d32871973a2..f65fae8939de 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -1182,63 +1182,6 @@ THERMAL_NO_LIMIT
> };
> };
> };
> -
> - /* The tzts1 ~ tzts6 don't need to polling */
> - /* The tzts1 ~ tzts6 don't need to thermal throttle */
> -
> - tzts1: tzts1 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 1>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tzts2: tzts2 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 2>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tzts3: tzts3 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 3>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tzts4: tzts4 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 4>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tzts5: tzts5 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 5>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tztsABB: tztsABB {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 6>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> };
>
> pwm0: pwm@1100e000 {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-09-14 13:19 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-14 13:12 Amjad Ouled-Ameur
2022-09-14 13:12 ` Amjad Ouled-Ameur
2022-09-14 13:18 ` Amjad Ouled-Ameur
2022-09-14 13:18 ` Re: Amjad Ouled-Ameur
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.