From: Sascha Hauer <s.hauer@pengutronix.de> To: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de> Subject: [PATCH v4 0/3] arm64: dts: Add InnoComm WB15-EVK support Date: Thu, 22 Sep 2022 10:13:44 +0200 [thread overview] Message-ID: <20220922081347.3860008-1-s.hauer@pengutronix.de> (raw) The InnoComm WB15-EVK [1] board is a Eval base board for the WB15 SoM [2] which is based on the NXP i.MX8MM. This series adds InnoComm as a vendor prefix and the necessary dts/dtsi files. [1] https://www.innocomm.com/product_inner.aspx?num=2233 [2] https://www.innocomm.com/product_inner.aspx?num=2232 Changes since v3: - drop unnecessary status = "okay" from new node Changes since v2: - Fix another remaining s/innocom/innocomm/ - Don't use underscores in node names - Use IRQ_TYPE_LEVEL_LOW to specify interrupt polarity Changes since v1: - Fix spelling of InnoComm: s/innocom/innocomm/ s/Innocom/InnoComm/ Sascha Hauer (3): dt-bindings: vendor-prefixes: Add prefix for InnoComm dt-bindings: arm: fsl: Add InnoComm WB15 EVK arm64: dts: freescale: Add InnoComm i.MX8MM based WB15 SoM and EVK .../devicetree/bindings/arm/fsl.yaml | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../freescale/imx8mm-innocomm-wb15-evk.dts | 146 ++++++ .../dts/freescale/imx8mm-innocomm-wb15.dtsi | 480 ++++++++++++++++++ 5 files changed, 630 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Sascha Hauer <s.hauer@pengutronix.de> To: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de> Subject: [PATCH v4 0/3] arm64: dts: Add InnoComm WB15-EVK support Date: Thu, 22 Sep 2022 10:13:44 +0200 [thread overview] Message-ID: <20220922081347.3860008-1-s.hauer@pengutronix.de> (raw) The InnoComm WB15-EVK [1] board is a Eval base board for the WB15 SoM [2] which is based on the NXP i.MX8MM. This series adds InnoComm as a vendor prefix and the necessary dts/dtsi files. [1] https://www.innocomm.com/product_inner.aspx?num=2233 [2] https://www.innocomm.com/product_inner.aspx?num=2232 Changes since v3: - drop unnecessary status = "okay" from new node Changes since v2: - Fix another remaining s/innocom/innocomm/ - Don't use underscores in node names - Use IRQ_TYPE_LEVEL_LOW to specify interrupt polarity Changes since v1: - Fix spelling of InnoComm: s/innocom/innocomm/ s/Innocom/InnoComm/ Sascha Hauer (3): dt-bindings: vendor-prefixes: Add prefix for InnoComm dt-bindings: arm: fsl: Add InnoComm WB15 EVK arm64: dts: freescale: Add InnoComm i.MX8MM based WB15 SoM and EVK .../devicetree/bindings/arm/fsl.yaml | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../freescale/imx8mm-innocomm-wb15-evk.dts | 146 ++++++ .../dts/freescale/imx8mm-innocomm-wb15.dtsi | 480 ++++++++++++++++++ 5 files changed, 630 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-09-22 8:14 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-22 8:13 Sascha Hauer [this message] 2022-09-22 8:13 ` [PATCH v4 0/3] arm64: dts: Add InnoComm WB15-EVK support Sascha Hauer 2022-09-22 8:13 ` [PATCH v4 1/3] dt-bindings: vendor-prefixes: Add prefix for InnoComm Sascha Hauer 2022-09-22 8:13 ` Sascha Hauer 2022-09-22 8:13 ` [PATCH v4 2/3] dt-bindings: arm: fsl: Add InnoComm WB15 EVK Sascha Hauer 2022-09-22 8:13 ` Sascha Hauer 2022-09-22 8:13 ` [PATCH v4 3/3] arm64: dts: freescale: Add InnoComm i.MX8MM based WB15 SoM and EVK Sascha Hauer 2022-09-22 8:13 ` Sascha Hauer 2022-09-22 13:02 ` Krzysztof Kozlowski 2022-09-22 13:02 ` Krzysztof Kozlowski 2022-10-23 12:49 ` Shawn Guo 2022-10-23 12:49 ` Shawn Guo 2022-09-29 10:10 ` [PATCH v4 0/3] arm64: dts: Add InnoComm WB15-EVK support Sascha Hauer 2022-09-29 10:10 ` Sascha Hauer 2022-10-18 7:59 ` Sascha Hauer 2022-10-18 7:59 ` Sascha Hauer
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220922081347.3860008-1-s.hauer@pengutronix.de \ --to=s.hauer@pengutronix.de \ --cc=devicetree@vger.kernel.org \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.