All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Subject: Re: [PATCH v4 0/3] arm64: dts: Add InnoComm WB15-EVK support
Date: Tue, 18 Oct 2022 09:59:59 +0200	[thread overview]
Message-ID: <20221018075959.GA9130@pengutronix.de> (raw)
In-Reply-To: <20220922081347.3860008-1-s.hauer@pengutronix.de>

Shawn,

will you take this series?

Thanks
  Sascha

On Thu, Sep 22, 2022 at 10:13:44AM +0200, Sascha Hauer wrote:
> The InnoComm WB15-EVK [1] board is a Eval base board for the WB15 SoM
> [2] which is based on the NXP i.MX8MM. This series adds InnoComm as a
> vendor prefix and the necessary dts/dtsi files.
> 														     [1] https://www.innocomm.com/product_inner.aspx?num=2233
> 														     [2] https://www.innocomm.com/product_inner.aspx?num=2232
> 
> Changes since v3:
> - drop unnecessary status = "okay" from new node
> 
> Changes since v2:
> - Fix another remaining s/innocom/innocomm/
> - Don't use underscores in node names
> - Use IRQ_TYPE_LEVEL_LOW to specify interrupt polarity
> 
> Changes since v1:
> - Fix spelling of InnoComm:
>   s/innocom/innocomm/
>   s/Innocom/InnoComm/
> 
> Sascha Hauer (3):
>   dt-bindings: vendor-prefixes: Add prefix for InnoComm
>   dt-bindings: arm: fsl: Add InnoComm WB15 EVK
>   arm64: dts: freescale: Add InnoComm i.MX8MM based WB15 SoM and EVK
> 
>  .../devicetree/bindings/arm/fsl.yaml          |   1 +
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../freescale/imx8mm-innocomm-wb15-evk.dts    | 146 ++++++
>  .../dts/freescale/imx8mm-innocomm-wb15.dtsi   | 480 ++++++++++++++++++
>  5 files changed, 630 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi
> 
> -- 
> 2.30.2
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

WARNING: multiple messages have this Message-ID (diff)
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Subject: Re: [PATCH v4 0/3] arm64: dts: Add InnoComm WB15-EVK support
Date: Tue, 18 Oct 2022 09:59:59 +0200	[thread overview]
Message-ID: <20221018075959.GA9130@pengutronix.de> (raw)
In-Reply-To: <20220922081347.3860008-1-s.hauer@pengutronix.de>

Shawn,

will you take this series?

Thanks
  Sascha

On Thu, Sep 22, 2022 at 10:13:44AM +0200, Sascha Hauer wrote:
> The InnoComm WB15-EVK [1] board is a Eval base board for the WB15 SoM
> [2] which is based on the NXP i.MX8MM. This series adds InnoComm as a
> vendor prefix and the necessary dts/dtsi files.
> 														     [1] https://www.innocomm.com/product_inner.aspx?num=2233
> 														     [2] https://www.innocomm.com/product_inner.aspx?num=2232
> 
> Changes since v3:
> - drop unnecessary status = "okay" from new node
> 
> Changes since v2:
> - Fix another remaining s/innocom/innocomm/
> - Don't use underscores in node names
> - Use IRQ_TYPE_LEVEL_LOW to specify interrupt polarity
> 
> Changes since v1:
> - Fix spelling of InnoComm:
>   s/innocom/innocomm/
>   s/Innocom/InnoComm/
> 
> Sascha Hauer (3):
>   dt-bindings: vendor-prefixes: Add prefix for InnoComm
>   dt-bindings: arm: fsl: Add InnoComm WB15 EVK
>   arm64: dts: freescale: Add InnoComm i.MX8MM based WB15 SoM and EVK
> 
>  .../devicetree/bindings/arm/fsl.yaml          |   1 +
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../freescale/imx8mm-innocomm-wb15-evk.dts    | 146 ++++++
>  .../dts/freescale/imx8mm-innocomm-wb15.dtsi   | 480 ++++++++++++++++++
>  5 files changed, 630 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi
> 
> -- 
> 2.30.2
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-10-18  8:00 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-22  8:13 [PATCH v4 0/3] arm64: dts: Add InnoComm WB15-EVK support Sascha Hauer
2022-09-22  8:13 ` Sascha Hauer
2022-09-22  8:13 ` [PATCH v4 1/3] dt-bindings: vendor-prefixes: Add prefix for InnoComm Sascha Hauer
2022-09-22  8:13   ` Sascha Hauer
2022-09-22  8:13 ` [PATCH v4 2/3] dt-bindings: arm: fsl: Add InnoComm WB15 EVK Sascha Hauer
2022-09-22  8:13   ` Sascha Hauer
2022-09-22  8:13 ` [PATCH v4 3/3] arm64: dts: freescale: Add InnoComm i.MX8MM based WB15 SoM and EVK Sascha Hauer
2022-09-22  8:13   ` Sascha Hauer
2022-09-22 13:02   ` Krzysztof Kozlowski
2022-09-22 13:02     ` Krzysztof Kozlowski
2022-10-23 12:49   ` Shawn Guo
2022-10-23 12:49     ` Shawn Guo
2022-09-29 10:10 ` [PATCH v4 0/3] arm64: dts: Add InnoComm WB15-EVK support Sascha Hauer
2022-09-29 10:10   ` Sascha Hauer
2022-10-18  7:59 ` Sascha Hauer [this message]
2022-10-18  7:59   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221018075959.GA9130@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.