From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Alim Akhtar <alim.akhtar@samsung.com>, Russell King <linux@armlinux.org.uk>, Kukjin Kim <kgene.kim@samsung.com>, Tomasz Figa <t.figa@samsung.com>, Kyungmin Park <kyungmin.park@samsung.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>, arm@kernel.org, soc@kernel.org Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>, Linus Walleij <linus.walleij@linaro.org>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Subject: [PATCH PULL 1/2] ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family Date: Mon, 26 Sep 2022 12:43:53 +0200 [thread overview] Message-ID: <20220926104354.118578-2-krzysztof.kozlowski@linaro.org> (raw) In-Reply-To: <20220926104354.118578-1-krzysztof.kozlowski@linaro.org> From: Dmitry Torokhov <dmitry.torokhov@gmail.com> According to s5k6a3 driver code, the reset line for the chip appears to be active low. This also matches the typical polarity of reset lines in general. Let's fix it up as having correct polarity in DTS is important when the driver will be switched over to gpiod API. Fixes: b4fec64758ab ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com --- arch/arm/boot/dts/exynos4412-midas.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index b967397a46c5..8e1c19a8ad06 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -586,7 +586,7 @@ image-sensor@10 { clocks = <&camera 1>; clock-names = "extclk"; samsung,camclk-out = <1>; - gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { is_s5k6a3_ep: endpoint { -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Alim Akhtar <alim.akhtar@samsung.com>, Russell King <linux@armlinux.org.uk>, Kukjin Kim <kgene.kim@samsung.com>, Tomasz Figa <t.figa@samsung.com>, Kyungmin Park <kyungmin.park@samsung.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>, arm@kernel.org, soc@kernel.org Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>, Linus Walleij <linus.walleij@linaro.org>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Subject: [PATCH PULL 1/2] ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family Date: Mon, 26 Sep 2022 12:43:53 +0200 [thread overview] Message-ID: <20220926104354.118578-2-krzysztof.kozlowski@linaro.org> (raw) In-Reply-To: <20220926104354.118578-1-krzysztof.kozlowski@linaro.org> From: Dmitry Torokhov <dmitry.torokhov@gmail.com> According to s5k6a3 driver code, the reset line for the chip appears to be active low. This also matches the typical polarity of reset lines in general. Let's fix it up as having correct polarity in DTS is important when the driver will be switched over to gpiod API. Fixes: b4fec64758ab ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com --- arch/arm/boot/dts/exynos4412-midas.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index b967397a46c5..8e1c19a8ad06 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -586,7 +586,7 @@ image-sensor@10 { clocks = <&camera 1>; clock-names = "extclk"; samsung,camclk-out = <1>; - gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { is_s5k6a3_ep: endpoint { -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-26 11:45 UTC|newest] Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-26 10:43 [PATCH PULL 0/2] Two patches for next cycle, v6.1 Krzysztof Kozlowski 2022-09-26 10:43 ` Krzysztof Kozlowski 2022-09-26 10:43 ` Krzysztof Kozlowski [this message] 2022-09-26 10:43 ` [PATCH PULL 1/2] ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family Krzysztof Kozlowski 2022-09-26 10:43 ` [PATCH PULL 2/2] ARM: s3c: remove orphan declarations from arch/arm/mach-s3c/devs.h Krzysztof Kozlowski 2022-09-26 10:43 ` Krzysztof Kozlowski 2022-09-28 21:00 ` [PATCH PULL 0/2] Two patches for next cycle, v6.1 patchwork-bot+linux-soc
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220926104354.118578-2-krzysztof.kozlowski@linaro.org \ --to=krzysztof.kozlowski@linaro.org \ --cc=alim.akhtar@samsung.com \ --cc=arm@kernel.org \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=dmitry.torokhov@gmail.com \ --cc=kgene.kim@samsung.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=kyungmin.park@samsung.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=s.nawrocki@samsung.com \ --cc=soc@kernel.org \ --cc=t.figa@samsung.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.