[PATCH AUTOSEL 4.9 01/10] media: cx88: Fix a null-ptr-deref bug in buffer_prepare()

[PATCH AUTOSEL 4.9 01/10] media: cx88: Fix a null-ptr-deref bug in buffer_prepare()

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 2b064d91440b33fba5b452f2d1b31f13ae911d71 ]

When the driver calls cx88_risc_buffer() to prepare the buffer, the
function call may fail, resulting in a empty buffer and null-ptr-deref
later in buffer_queue().

The following log can reveal it:

[   41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
[   41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[   41.828027] RIP: 0010:buffer_queue+0xc2/0x500
[   41.836311] Call Trace:
[   41.836945]  __enqueue_in_driver+0x141/0x360
[   41.837262]  vb2_start_streaming+0x62/0x4a0
[   41.838216]  vb2_core_streamon+0x1da/0x2c0
[   41.838516]  __vb2_init_fileio+0x981/0xbc0
[   41.839141]  __vb2_perform_fileio+0xbf9/0x1120
[   41.840072]  vb2_fop_read+0x20e/0x400
[   41.840346]  v4l2_read+0x215/0x290
[   41.840603]  vfs_read+0x162/0x4c0

Fix this by checking the return value of cx88_risc_buffer()

[hverkuil: fix coding style issues]

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/cx88/cx88-vbi.c   |  9 +++---
 drivers/media/pci/cx88/cx88-video.c | 43 +++++++++++++++--------------
 2 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/media/pci/cx88/cx88-vbi.c b/drivers/media/pci/cx88/cx88-vbi.c
index d3237cf8ffa3..78d78b7c974c 100644
--- a/drivers/media/pci/cx88/cx88-vbi.c
+++ b/drivers/media/pci/cx88/cx88-vbi.c
@@ -140,11 +140,10 @@ static int buffer_prepare(struct vb2_buffer *vb)
 		return -EINVAL;
 	vb2_set_plane_payload(vb, 0, size);
 
-	cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl,
-			 0, VBI_LINE_LENGTH * lines,
-			 VBI_LINE_LENGTH, 0,
-			 lines);
-	return 0;
+	return cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl,
+				0, VBI_LINE_LENGTH * lines,
+				VBI_LINE_LENGTH, 0,
+				lines);
 }
 
 static void buffer_finish(struct vb2_buffer *vb)
diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c
index 3b140ad598de..0ad0f4ab6c4b 100644
--- a/drivers/media/pci/cx88/cx88-video.c
+++ b/drivers/media/pci/cx88/cx88-video.c
@@ -443,6 +443,7 @@ static int queue_setup(struct vb2_queue *q,
 
 static int buffer_prepare(struct vb2_buffer *vb)
 {
+	int ret;
 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
 	struct cx88_core *core = dev->core;
@@ -457,42 +458,42 @@ static int buffer_prepare(struct vb2_buffer *vb)
 
 	switch (core->field) {
 	case V4L2_FIELD_TOP:
-		cx88_risc_buffer(dev->pci, &buf->risc,
-				 sgt->sgl, 0, UNSET,
-				 buf->bpl, 0, core->height);
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl, 0, UNSET,
+				       buf->bpl, 0, core->height);
 		break;
 	case V4L2_FIELD_BOTTOM:
-		cx88_risc_buffer(dev->pci, &buf->risc,
-				 sgt->sgl, UNSET, 0,
-				 buf->bpl, 0, core->height);
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl, UNSET, 0,
+				       buf->bpl, 0, core->height);
 		break;
 	case V4L2_FIELD_SEQ_TB:
-		cx88_risc_buffer(dev->pci, &buf->risc,
-				 sgt->sgl,
-				 0, buf->bpl * (core->height >> 1),
-				 buf->bpl, 0,
-				 core->height >> 1);
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl,
+				       0, buf->bpl * (core->height >> 1),
+				       buf->bpl, 0,
+				       core->height >> 1);
 		break;
 	case V4L2_FIELD_SEQ_BT:
-		cx88_risc_buffer(dev->pci, &buf->risc,
-				 sgt->sgl,
-				 buf->bpl * (core->height >> 1), 0,
-				 buf->bpl, 0,
-				 core->height >> 1);
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl,
+				       buf->bpl * (core->height >> 1), 0,
+				       buf->bpl, 0,
+				       core->height >> 1);
 		break;
 	case V4L2_FIELD_INTERLACED:
 	default:
-		cx88_risc_buffer(dev->pci, &buf->risc,
-				 sgt->sgl, 0, buf->bpl,
-				 buf->bpl, buf->bpl,
-				 core->height >> 1);
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl, 0, buf->bpl,
+				       buf->bpl, buf->bpl,
+				       core->height >> 1);
 		break;
 	}
 	dprintk(2,"[%p/%d] buffer_prepare - %dx%d %dbpp \"%s\" - dma=0x%08lx\n",
 		buf, buf->vb.vb2_buf.index,
 		core->width, core->height, dev->fmt->depth, dev->fmt->name,
 		(unsigned long)buf->risc.dma);
-	return 0;
+	return ret;
 }
 
 static void buffer_finish(struct vb2_buffer *vb)
-- 
2.35.1

[PATCH AUTOSEL 4.9 02/10] scsi: 3w-9xxx: Avoid disabling device if failing to enable it

[Sasha Levin]

From: Letu Ren <fantasquex@gmail.com>

[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ]

The original code will "goto out_disable_device" and call
pci_disable_device() if pci_enable_device() fails. The kernel will generate
a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled
device".

We shouldn't disable a device that failed to be enabled. A simple return is
fine.

Link: https://lore.kernel.org/r/20220829110115.38789-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/3w-9xxx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index b78a2f3745f2..9c2edd9b66d1 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -2016,7 +2016,7 @@ static int twa_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 	retval = pci_enable_device(pdev);
 	if (retval) {
 		TW_PRINTK(host, TW_DRIVER, 0x34, "Failed to enable pci device");
-		goto out_disable_device;
+		return -ENODEV;
 	}
 
 	pci_set_master(pdev);
-- 
2.35.1

[PATCH AUTOSEL 4.9 03/10] hid: topre: Add driver fixing report descriptor

[Sasha Levin]

From: Harry Stern <harry@harrystern.net>

[ Upstream commit a109d5c45b3d6728b9430716b915afbe16eef27c ]

The Topre REALFORCE R2 firmware incorrectly reports that interface
descriptor number 1, input report descriptor 2's events are array events
rather than variable events. That particular report descriptor is used
to report keypresses when there are more than 6 keys held at a time.
This bug prevents events from this interface from being registered
properly, so only 6 keypresses (from a different interface) can be
registered at once, rather than full n-key rollover.

This commit fixes the bug by setting the correct value in a report_fixup
function.

The original bug report can be found here:
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/804

Thanks to Benjamin Tissoires for diagnosing the issue with the report
descriptor.

Signed-off-by: Harry Stern <harry@harrystern.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220911003614.297613-1-harry@harrystern.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/Kconfig     |  6 +++++
 drivers/hid/Makefile    |  1 +
 drivers/hid/hid-ids.h   |  3 +++
 drivers/hid/hid-topre.c | 49 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 59 insertions(+)
 create mode 100644 drivers/hid/hid-topre.c

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 2b5ae00f8df2..80c54cd437db 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -837,6 +837,12 @@ config HID_TOPSEED
 	Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
 	CLLRCMCE remote control.
 
+config HID_TOPRE
+	tristate "Topre REALFORCE keyboards"
+	depends on HID
+	help
+	  Say Y for N-key rollover support on Topre REALFORCE R2 108 key keyboards.
+
 config HID_THINGM
 	tristate "ThingM blink(1) USB RGB LED"
 	depends on HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 86b2b5785fd2..245878158850 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_HID_GREENASIA)	+= hid-gaff.o
 obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o
 obj-$(CONFIG_HID_TIVO)		+= hid-tivo.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
+obj-$(CONFIG_HID_TOPRE)	+= hid-topre.o
 obj-$(CONFIG_HID_TWINHAN)	+= hid-twinhan.o
 obj-$(CONFIG_HID_UCLOGIC)	+= hid-uclogic.o
 obj-$(CONFIG_HID_LED)		+= hid-led.o
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 1f641870d860..3ae9f6489f8f 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1001,6 +1001,9 @@
 #define USB_DEVICE_ID_TIVO_SLIDE	0x1201
 #define USB_DEVICE_ID_TIVO_SLIDE_PRO	0x1203
 
+#define USB_VENDOR_ID_TOPRE			0x0853
+#define USB_DEVICE_ID_TOPRE_REALFORCE_R2_108			0x0148
+
 #define USB_VENDOR_ID_TOPSEED		0x0766
 #define USB_DEVICE_ID_TOPSEED_CYBERLINK	0x0204
 
diff --git a/drivers/hid/hid-topre.c b/drivers/hid/hid-topre.c
new file mode 100644
index 000000000000..88a91cdad5f8
--- /dev/null
+++ b/drivers/hid/hid-topre.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  HID driver for Topre REALFORCE Keyboards
+ *
+ *  Copyright (c) 2022 Harry Stern <harry@harrystern.net>
+ *
+ *  Based on the hid-macally driver
+ */
+
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+MODULE_AUTHOR("Harry Stern <harry@harrystern.net>");
+MODULE_DESCRIPTION("REALFORCE R2 Keyboard driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Fix the REALFORCE R2's non-boot interface's report descriptor to match the
+ * events it's actually sending. It claims to send array events but is instead
+ * sending variable events.
+ */
+static __u8 *topre_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+				 unsigned int *rsize)
+{
+	if (*rsize >= 119 && rdesc[69] == 0x29 && rdesc[70] == 0xe7 &&
+						 rdesc[71] == 0x81 && rdesc[72] == 0x00) {
+		hid_info(hdev,
+			"fixing up Topre REALFORCE keyboard report descriptor\n");
+		rdesc[72] = 0x02;
+	}
+	return rdesc;
+}
+
+static const struct hid_device_id topre_id_table[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPRE,
+			 USB_DEVICE_ID_TOPRE_REALFORCE_R2_108) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, topre_id_table);
+
+static struct hid_driver topre_driver = {
+	.name			= "topre",
+	.id_table		= topre_id_table,
+	.report_fixup		= topre_report_fixup,
+};
+
+module_hid_driver(topre_driver);
-- 
2.35.1

[PATCH AUTOSEL 4.9 04/10] HID: roccat: Fix use-after-free in roccat_read()

[Sasha Levin]

From: Hyunwoo Kim <imv4bel@gmail.com>

[ Upstream commit cacdb14b1c8d3804a3a7d31773bc7569837b71a4 ]

roccat_report_event() is responsible for registering
roccat-related reports in struct roccat_device.

int roccat_report_event(int minor, u8 const *data)
{
	struct roccat_device *device;
	struct roccat_reader *reader;
	struct roccat_report *report;
	uint8_t *new_value;

	device = devices[minor];

	new_value = kmemdup(data, device->report_size, GFP_ATOMIC);
	if (!new_value)
		return -ENOMEM;

	report = &device->cbuf[device->cbuf_end];

	/* passing NULL is safe */
	kfree(report->value);
	...

The registered report is stored in the struct roccat_device member
"struct roccat_report cbuf[ROCCAT_CBUF_SIZE];".
If more reports are received than the "ROCCAT_CBUF_SIZE" value,
kfree() the saved report from cbuf[0] and allocates a new reprot.
Since there is no lock when this kfree() is performed,
kfree() can be performed even while reading the saved report.

static ssize_t roccat_read(struct file *file, char __user *buffer,
		size_t count, loff_t *ppos)
{
	struct roccat_reader *reader = file->private_data;
	struct roccat_device *device = reader->device;
	struct roccat_report *report;
	ssize_t retval = 0, len;
	DECLARE_WAITQUEUE(wait, current);

	mutex_lock(&device->cbuf_lock);

	...

	report = &device->cbuf[reader->cbuf_start];
	/*
	 * If report is larger than requested amount of data, rest of report
	 * is lost!
	 */
	len = device->report_size > count ? count : device->report_size;

	if (copy_to_user(buffer, report->value, len)) {
		retval = -EFAULT;
		goto exit_unlock;
	}
	...

The roccat_read() function receives the device->cbuf report and
delivers it to the user through copy_to_user().
If the N+ROCCAT_CBUF_SIZE th report is received while copying of
the Nth report->value is in progress, the pointer that copy_to_user()
is working on is kfree()ed and UAF read may occur. (race condition)

Since the device node of this driver does not set separate permissions,
this is not a security vulnerability, but because it is used for
requesting screen display of profile or dpi settings,
a user using the roccat device can apply udev to this device node or
There is a possibility to use it by giving.

Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-roccat.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hid/hid-roccat.c b/drivers/hid/hid-roccat.c
index 76d06cf87b2a..36eee9663962 100644
--- a/drivers/hid/hid-roccat.c
+++ b/drivers/hid/hid-roccat.c
@@ -260,6 +260,8 @@ int roccat_report_event(int minor, u8 const *data)
 	if (!new_value)
 		return -ENOMEM;
 
+	mutex_lock(&device->cbuf_lock);
+
 	report = &device->cbuf[device->cbuf_end];
 
 	/* passing NULL is safe */
@@ -279,6 +281,8 @@ int roccat_report_event(int minor, u8 const *data)
 			reader->cbuf_start = (reader->cbuf_start + 1) % ROCCAT_CBUF_SIZE;
 	}
 
+	mutex_unlock(&device->cbuf_lock);
+
 	wake_up_interruptible(&device->wait);
 	return 0;
 }
-- 
2.35.1

[PATCH AUTOSEL 4.9 05/10] HSI: ssi_protocol: fix potential resource leak in ssip_pn_open()

[Sasha Levin]

From: Jianglei Nie <niejianglei2021@163.com>

[ Upstream commit b28dbcb379e6a7f80262c2732a57681b1ee548ca ]

ssip_pn_open() claims the HSI client's port with hsi_claim_port(). When
hsi_register_port_event() gets some error and returns a negetive value,
the HSI client's port should be released with hsi_release_port().

Fix it by calling hsi_release_port() when hsi_register_port_event() fails.

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hsi/clients/ssi_protocol.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hsi/clients/ssi_protocol.c b/drivers/hsi/clients/ssi_protocol.c
index 802afc98e8bd..09e6be746d1e 100644
--- a/drivers/hsi/clients/ssi_protocol.c
+++ b/drivers/hsi/clients/ssi_protocol.c
@@ -932,6 +932,7 @@ static int ssip_pn_open(struct net_device *dev)
 	if (err < 0) {
 		dev_err(&cl->device, "Register HSI port event failed (%d)\n",
 			err);
+		hsi_release_port(cl);
 		return err;
 	}
 	dev_dbg(&cl->device, "Configuring SSI port\n");
-- 
2.35.1

[PATCH AUTOSEL 4.9 06/10] usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()

[Sasha Levin]

From: Jianglei Nie <niejianglei2021@163.com>

[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ]

xhci_alloc_stream_info() allocates stream context array for stream_info
->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs,
stream_info->stream_ctx_array is not released, which will lead to a
memory leak.

We can fix it by releasing the stream_info->stream_ctx_array with
xhci_free_stream_ctx() on the error path to avoid the potential memory
leak.

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-mem.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 9b30936904da..0850d587683a 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -703,7 +703,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 			num_stream_ctxs, &stream_info->ctx_array_dma,
 			mem_flags);
 	if (!stream_info->stream_ctx_array)
-		goto cleanup_ctx;
+		goto cleanup_ring_array;
 	memset(stream_info->stream_ctx_array, 0,
 			sizeof(struct xhci_stream_ctx)*num_stream_ctxs);
 
@@ -764,6 +764,11 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 	}
 	xhci_free_command(xhci, stream_info->free_streams_command);
 cleanup_ctx:
+	xhci_free_stream_ctx(xhci,
+		stream_info->num_stream_ctxs,
+		stream_info->stream_ctx_array,
+		stream_info->ctx_array_dma);
+cleanup_ring_array:
 	kfree(stream_info->stream_rings);
 cleanup_info:
 	kfree(stream_info);
-- 
2.35.1

[PATCH AUTOSEL 4.9 07/10] usb: musb: Fix musb_gadget.c rxstate overflow bug

[Sasha Levin]

From: Robin Guo <guoweibin@inspur.com>

[ Upstream commit eea4c860c3b366369eff0489d94ee4f0571d467d ]

The usb function device call musb_gadget_queue() adds the passed
request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz)
and (is_buffer_mapped(req) return false),the rxstate() will copy all data
in fifo to request->buf which may cause request->buf out of bounds.

Fix it by add the length check :
fifocnt = min_t(unsigned, request->length - request->actual, fifocnt);

Signed-off-by: Robin Guo <guoweibin@inspur.com>
Link: https://lore.kernel.org/r/20220906102119.1b071d07a8391ff115e6d1ef@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/musb/musb_gadget.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 8eb3a291ca9d..02ec84ce5ab9 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -785,6 +785,9 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 			musb_writew(epio, MUSB_RXCSR, csr);
 
 buffer_aint_mapped:
+			fifo_count = min_t(unsigned int,
+					request->length - request->actual,
+					(unsigned int)fifo_count);
 			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
 					(request->buf + request->actual));
 			request->actual += fifo_count;
-- 
2.35.1

[PATCH AUTOSEL 4.9 08/10] Revert "usb: storage: Add quirk for Samsung Fit flash"

[Sasha Levin]

From: sunghwan jung <onenowy@gmail.com>

[ Upstream commit ad5dbfc123e6ffbbde194e2a4603323e09f741ee ]

This reverts commit 86d92f5465958752481269348d474414dccb1552,
which fix the timeout issue for "Samsung Fit Flash".

But the commit affects not only "Samsung Fit Flash" but also other usb
storages that use the same controller and causes severe performance
regression.

 # hdparm -t /dev/sda (without the quirk)
 Timing buffered disk reads: 622 MB in  3.01 seconds = 206.66 MB/sec

 # hdparm -t /dev/sda (with the quirk)
 Timing buffered disk reads: 220 MB in  3.00 seconds =  73.32 MB/sec

The commit author mentioned that "Issue was reproduced after device has
bad block", so this quirk should be applied when we have the timeout
issue with a device that has bad blocks.

We revert the commit so that we apply this quirk by adding kernel
paramters using a bootloader or other ways when we really need it,
without the performance regression with devices that don't have the
issue.

Signed-off-by: sunghwan jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20220913114913.3073-1-onenowy@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/storage/unusual_devs.h | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 5a6ca1460711..8c51bb66f16f 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1294,12 +1294,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
 		USB_SC_RBC, USB_PR_BULK, NULL,
 		0 ),
 
-UNUSUAL_DEV(0x090c, 0x1000, 0x1100, 0x1100,
-		"Samsung",
-		"Flash Drive FIT",
-		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_MAX_SECTORS_64),
-
 /* aeb */
 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		"Feiya",
-- 
2.35.1

[PATCH AUTOSEL 4.9 09/10] staging: octeon: Fix return type of cvm_oct_xmit and cvm_oct_xmit_pow

[Sasha Levin]

From: Nathan Huckleberry <nhuck@google.com>

[ Upstream commit b77599043f00fce9253d0f22522c5d5b521555ce ]

The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).

The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.

The return type of cvm_oct_xmit and cvm_oct_xmit_pow should be changed
from int to netdev_tx_t.

Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Link: https://lore.kernel.org/r/20220914211057.423617-1-nhuck@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/octeon/ethernet-tx.c | 4 ++--
 drivers/staging/octeon/ethernet-tx.h | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index 6b4c20872323..e773353ee579 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -137,7 +137,7 @@ static void cvm_oct_free_tx_skbs(struct net_device *dev)
  *
  * Returns Always returns NETDEV_TX_OK
  */
-int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	cvmx_pko_command_word0_t pko_command;
 	union cvmx_buf_ptr hw_buffer;
@@ -523,7 +523,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 
  * Returns Always returns zero
  */
-int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
 	void *packet_buffer;
diff --git a/drivers/staging/octeon/ethernet-tx.h b/drivers/staging/octeon/ethernet-tx.h
index 84848e4c1664..65faefc87081 100644
--- a/drivers/staging/octeon/ethernet-tx.h
+++ b/drivers/staging/octeon/ethernet-tx.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  */
 
-int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev);
-int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev);
 int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
 			 int do_free, int qos);
 void cvm_oct_tx_initialize(void);
-- 
2.35.1

[PATCH AUTOSEL 4.9 10/10] usb: idmouse: fix an uninit-value in idmouse_open

[Sasha Levin]

From: Dongliang Mu <mudongliangabcd@gmail.com>

[ Upstream commit bce2b0539933e485d22d6f6f076c0fcd6f185c4c ]

In idmouse_create_image, if any ftip_command fails, it will
go to the reset label. However, this leads to the data in
bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check
for valid image incurs an uninitialized dereference.

Fix this by moving the check before reset label since this
check only be valid if the data after bulk_in_buffer[HEADER]
has concrete data.

Note that this is found by KMSAN, so only kernel compilation
is tested.

Reported-by: syzbot+79832d33eb89fb3cd092@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20220922134847.1101921-1-dzm91@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/misc/idmouse.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 9cf8a9b16336..51f5cee880b2 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -183,10 +183,6 @@ static int idmouse_create_image(struct usb_idmouse *dev)
 		bytes_read += bulk_read;
 	}
 
-	/* reset the device */
-reset:
-	ftip_command(dev, FTIP_RELEASE, 0, 0);
-
 	/* check for valid image */
 	/* right border should be black (0x00) */
 	for (bytes_read = sizeof(HEADER)-1 + WIDTH-1; bytes_read < IMGSIZE; bytes_read += WIDTH)
@@ -198,6 +194,10 @@ static int idmouse_create_image(struct usb_idmouse *dev)
 		if (dev->bulk_in_buffer[bytes_read] != 0xFF)
 			return -EAGAIN;
 
+	/* reset the device */
+reset:
+	ftip_command(dev, FTIP_RELEASE, 0, 0);
+
 	/* should be IMGSIZE == 65040 */
 	dev_dbg(&dev->interface->dev, "read %d bytes fingerprint data\n",
 		bytes_read);
-- 
2.35.1

Re: [PATCH AUTOSEL 4.9 09/10] staging: octeon: Fix return type of cvm_oct_xmit and cvm_oct_xmit_pow

[Greg Kroah-Hartman]

On Wed, Oct 12, 2022 at 08:27:56PM -0400, Sasha Levin wrote:
> From: Nathan Huckleberry <nhuck@google.com>
> 
> [ Upstream commit b77599043f00fce9253d0f22522c5d5b521555ce ]
> 
> The ndo_start_xmit field in net_device_ops is expected to be of type
> netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
> 
> The mismatched return type breaks forward edge kCFI since the underlying
> function definition does not match the function hook definition.

kCFI showed up in 6.1, so this is not needed in any stable branches,
please drop it from all.

thanks,

greg k-h

Re: [PATCH AUTOSEL 4.9 08/10] Revert "usb: storage: Add quirk for Samsung Fit flash"

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 2175 bytes --]

Hi!

> From: sunghwan jung <onenowy@gmail.com>
> 
> [ Upstream commit ad5dbfc123e6ffbbde194e2a4603323e09f741ee ]
> 
> This reverts commit 86d92f5465958752481269348d474414dccb1552,
> which fix the timeout issue for "Samsung Fit Flash".
> 
> But the commit affects not only "Samsung Fit Flash" but also other usb
> storages that use the same controller and causes severe performance
> regression.
> 
>  # hdparm -t /dev/sda (without the quirk)
>  Timing buffered disk reads: 622 MB in  3.01 seconds = 206.66 MB/sec
> 
>  # hdparm -t /dev/sda (with the quirk)
>  Timing buffered disk reads: 220 MB in  3.00 seconds =  73.32 MB/sec
> 
> The commit author mentioned that "Issue was reproduced after device has
> bad block", so this quirk should be applied when we have the timeout
> issue with a device that has bad blocks.
> 
> We revert the commit so that we apply this quirk by adding kernel
> paramters using a bootloader or other ways when we really need it,
> without the performance regression with devices that don't have the
> issue.

Re-introducing timeouts for users in middle of stable series... may
not be nice. Is there better fix in a follow up to this that was not
backported?

I see that buffered reads got faster, but that may not really mean
real performance gains...

Best regards,
								Pavel

>  drivers/usb/storage/unusual_devs.h | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
> index 5a6ca1460711..8c51bb66f16f 100644
> --- a/drivers/usb/storage/unusual_devs.h
> +++ b/drivers/usb/storage/unusual_devs.h
> @@ -1294,12 +1294,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
>  		USB_SC_RBC, USB_PR_BULK, NULL,
>  		0 ),
>  
> -UNUSUAL_DEV(0x090c, 0x1000, 0x1100, 0x1100,
> -		"Samsung",
> -		"Flash Drive FIT",
> -		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> -		US_FL_MAX_SECTORS_64),
> -
>  /* aeb */
>  UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
>  		"Feiya",

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH AUTOSEL 4.9 03/10] hid: topre: Add driver fixing report descriptor

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1733 bytes --]

Hi!

> From: Harry Stern <harry@harrystern.net>
> 
> [ Upstream commit a109d5c45b3d6728b9430716b915afbe16eef27c ]
> 
> The Topre REALFORCE R2 firmware incorrectly reports that interface
> descriptor number 1, input report descriptor 2's events are array events
> rather than variable events. That particular report descriptor is used
> to report keypresses when there are more than 6 keys held at a time.
> This bug prevents events from this interface from being registered
> properly, so only 6 keypresses (from a different interface) can be
> registered at once, rather than full n-key rollover.
> 
> This commit fixes the bug by setting the correct value in a report_fixup
> function.
> 
> The original bug report can be found here:
> Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/804
> 
> Thanks to Benjamin Tissoires for diagnosing the issue with the report
> descriptor.

Come on, whole new driver to work around hw problem that is not really
serious. Plus this won't really do anything unless people enable it in
config.

This should not be in stable.

Best regards,
								Pavel

> Signed-off-by: Harry Stern <harry@harrystern.net>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> Link: https://lore.kernel.org/r/20220911003614.297613-1-harry@harrystern.net
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/hid/Kconfig     |  6 +++++
>  drivers/hid/Makefile    |  1 +
>  drivers/hid/hid-ids.h   |  3 +++
>  drivers/hid/hid-topre.c | 49 +++++++++++++++++++++++++++++++++++++++++

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH AUTOSEL 4.9 08/10] Revert "usb: storage: Add quirk for Samsung Fit flash"

[Greg Kroah-Hartman]

On Mon, Oct 17, 2022 at 02:46:32PM +0200, Pavel Machek wrote:
> Hi!
> 
> > From: sunghwan jung <onenowy@gmail.com>
> > 
> > [ Upstream commit ad5dbfc123e6ffbbde194e2a4603323e09f741ee ]
> > 
> > This reverts commit 86d92f5465958752481269348d474414dccb1552,
> > which fix the timeout issue for "Samsung Fit Flash".
> > 
> > But the commit affects not only "Samsung Fit Flash" but also other usb
> > storages that use the same controller and causes severe performance
> > regression.
> > 
> >  # hdparm -t /dev/sda (without the quirk)
> >  Timing buffered disk reads: 622 MB in  3.01 seconds = 206.66 MB/sec
> > 
> >  # hdparm -t /dev/sda (with the quirk)
> >  Timing buffered disk reads: 220 MB in  3.00 seconds =  73.32 MB/sec
> > 
> > The commit author mentioned that "Issue was reproduced after device has
> > bad block", so this quirk should be applied when we have the timeout
> > issue with a device that has bad blocks.
> > 
> > We revert the commit so that we apply this quirk by adding kernel
> > paramters using a bootloader or other ways when we really need it,
> > without the performance regression with devices that don't have the
> > issue.
> 
> Re-introducing timeouts for users in middle of stable series... may
> not be nice. Is there better fix in a follow up to this that was not
> backported?

No.

thanks,

greg k-h