From: Jammy Huang <jammy_huang@aspeedtech.com> To: <eajames@linux.ibm.com>, <mchehab@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>, <hverkuil-cisco@xs4all.nl>, <zev@bewilderbeest.net>, <linux-media@vger.kernel.org>, <openbmc@lists.ozlabs.org>, <linux-arm-kernel@lists.infradead.org>, <linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH] media: aspeed: Use v4l2_dbg to replace v4l2_warn to avoid log spam Date: Thu, 10 Nov 2022 17:56:11 +0800 [thread overview] Message-ID: <20221110095611.522-1-jammy_huang@aspeedtech.com> (raw) If the host is powered off, there will be many warning log. To avoid the log spam in this condition, replace v4l2_warn with v4l2_dbg. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> --- drivers/media/platform/aspeed/aspeed-video.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/media/platform/aspeed/aspeed-video.c b/drivers/media/platform/aspeed/aspeed-video.c index cf76aeee8cb6..662465d13a0e 100644 --- a/drivers/media/platform/aspeed/aspeed-video.c +++ b/drivers/media/platform/aspeed/aspeed-video.c @@ -586,13 +586,13 @@ static int aspeed_video_start_frame(struct aspeed_video *video) bool bcd_buf_need = (video->format != VIDEO_FMT_STANDARD); if (video->v4l2_input_status) { - v4l2_warn(&video->v4l2_dev, "No signal; don't start frame\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "No signal; don't start frame\n"); return 0; } if (!(seq_ctrl & VE_SEQ_CTRL_COMP_BUSY) || !(seq_ctrl & VE_SEQ_CTRL_CAP_BUSY)) { - v4l2_warn(&video->v4l2_dev, "Engine busy; don't start frame\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "Engine busy; don't start frame\n"); return -EBUSY; } @@ -615,7 +615,7 @@ static int aspeed_video_start_frame(struct aspeed_video *video) struct aspeed_video_buffer, link); if (!buf) { spin_unlock_irqrestore(&video->lock, flags); - v4l2_warn(&video->v4l2_dev, "No buffers; don't start frame\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "No buffers; don't start frame\n"); return -EPROTO; } @@ -796,7 +796,7 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg) if (video->format == VIDEO_FMT_STANDARD && list_is_last(&buf->link, &video->buffers)) { empty = false; - v4l2_warn(&video->v4l2_dev, "skip to keep last frame updated\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "skip to keep last frame updated\n"); } else { buf->vb.vb2_buf.timestamp = ktime_get_ns(); buf->vb.sequence = video->sequence++; @@ -1060,7 +1060,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) res_check(video), MODE_DETECT_TIMEOUT); if (!rc) { - v4l2_warn(&video->v4l2_dev, "Timed out; first mode detect\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "Timed out; first mode detect\n"); clear_bit(VIDEO_RES_DETECT, &video->flags); return; } @@ -1081,7 +1081,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) MODE_DETECT_TIMEOUT); clear_bit(VIDEO_RES_DETECT, &video->flags); if (!rc) { - v4l2_warn(&video->v4l2_dev, "Timed out; second mode detect\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "Timed out; second mode detect\n"); return; } @@ -1104,7 +1104,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) } while (invalid_resolution && (tries++ < INVALID_RESOLUTION_RETRIES)); if (invalid_resolution) { - v4l2_warn(&video->v4l2_dev, "Invalid resolution detected\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "Invalid resolution detected\n"); return; } @@ -1856,7 +1856,7 @@ static void aspeed_video_stop_streaming(struct vb2_queue *q) !test_bit(VIDEO_FRAME_INPRG, &video->flags), STOP_TIMEOUT); if (!rc) { - v4l2_warn(&video->v4l2_dev, "Timed out when stopping streaming\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "Timed out when stopping streaming\n"); /* * Need to force stop any DMA and try and get HW into a good base-commit: aae703b02f92bde9264366c545e87cec451de471 prerequisite-patch-id: bf47e8ab2998acfbc32be5a4b7b5ae8a3ae4218b prerequisite-patch-id: bf82715983e08f2e810ff1a82ce644f5f9006cd9 prerequisite-patch-id: 28a2040ef0235e5765f05d2fc5529bce2a0f4c6f prerequisite-patch-id: 7e761c779730536db8baf50db5fc8caf058e95af prerequisite-patch-id: c48ea20973fa35938a7d33a0e20d2900df48755f -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jammy Huang <jammy_huang@aspeedtech.com> To: <eajames@linux.ibm.com>, <mchehab@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>, <hverkuil-cisco@xs4all.nl>, <zev@bewilderbeest.net>, <linux-media@vger.kernel.org>, <openbmc@lists.ozlabs.org>, <linux-arm-kernel@lists.infradead.org>, <linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH] media: aspeed: Use v4l2_dbg to replace v4l2_warn to avoid log spam Date: Thu, 10 Nov 2022 17:56:11 +0800 [thread overview] Message-ID: <20221110095611.522-1-jammy_huang@aspeedtech.com> (raw) If the host is powered off, there will be many warning log. To avoid the log spam in this condition, replace v4l2_warn with v4l2_dbg. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> --- drivers/media/platform/aspeed/aspeed-video.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/media/platform/aspeed/aspeed-video.c b/drivers/media/platform/aspeed/aspeed-video.c index cf76aeee8cb6..662465d13a0e 100644 --- a/drivers/media/platform/aspeed/aspeed-video.c +++ b/drivers/media/platform/aspeed/aspeed-video.c @@ -586,13 +586,13 @@ static int aspeed_video_start_frame(struct aspeed_video *video) bool bcd_buf_need = (video->format != VIDEO_FMT_STANDARD); if (video->v4l2_input_status) { - v4l2_warn(&video->v4l2_dev, "No signal; don't start frame\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "No signal; don't start frame\n"); return 0; } if (!(seq_ctrl & VE_SEQ_CTRL_COMP_BUSY) || !(seq_ctrl & VE_SEQ_CTRL_CAP_BUSY)) { - v4l2_warn(&video->v4l2_dev, "Engine busy; don't start frame\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "Engine busy; don't start frame\n"); return -EBUSY; } @@ -615,7 +615,7 @@ static int aspeed_video_start_frame(struct aspeed_video *video) struct aspeed_video_buffer, link); if (!buf) { spin_unlock_irqrestore(&video->lock, flags); - v4l2_warn(&video->v4l2_dev, "No buffers; don't start frame\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "No buffers; don't start frame\n"); return -EPROTO; } @@ -796,7 +796,7 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg) if (video->format == VIDEO_FMT_STANDARD && list_is_last(&buf->link, &video->buffers)) { empty = false; - v4l2_warn(&video->v4l2_dev, "skip to keep last frame updated\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "skip to keep last frame updated\n"); } else { buf->vb.vb2_buf.timestamp = ktime_get_ns(); buf->vb.sequence = video->sequence++; @@ -1060,7 +1060,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) res_check(video), MODE_DETECT_TIMEOUT); if (!rc) { - v4l2_warn(&video->v4l2_dev, "Timed out; first mode detect\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "Timed out; first mode detect\n"); clear_bit(VIDEO_RES_DETECT, &video->flags); return; } @@ -1081,7 +1081,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) MODE_DETECT_TIMEOUT); clear_bit(VIDEO_RES_DETECT, &video->flags); if (!rc) { - v4l2_warn(&video->v4l2_dev, "Timed out; second mode detect\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "Timed out; second mode detect\n"); return; } @@ -1104,7 +1104,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) } while (invalid_resolution && (tries++ < INVALID_RESOLUTION_RETRIES)); if (invalid_resolution) { - v4l2_warn(&video->v4l2_dev, "Invalid resolution detected\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "Invalid resolution detected\n"); return; } @@ -1856,7 +1856,7 @@ static void aspeed_video_stop_streaming(struct vb2_queue *q) !test_bit(VIDEO_FRAME_INPRG, &video->flags), STOP_TIMEOUT); if (!rc) { - v4l2_warn(&video->v4l2_dev, "Timed out when stopping streaming\n"); + v4l2_dbg(1, debug, &video->v4l2_dev, "Timed out when stopping streaming\n"); /* * Need to force stop any DMA and try and get HW into a good base-commit: aae703b02f92bde9264366c545e87cec451de471 prerequisite-patch-id: bf47e8ab2998acfbc32be5a4b7b5ae8a3ae4218b prerequisite-patch-id: bf82715983e08f2e810ff1a82ce644f5f9006cd9 prerequisite-patch-id: 28a2040ef0235e5765f05d2fc5529bce2a0f4c6f prerequisite-patch-id: 7e761c779730536db8baf50db5fc8caf058e95af prerequisite-patch-id: c48ea20973fa35938a7d33a0e20d2900df48755f -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-11-10 9:58 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-10 9:56 Jammy Huang [this message] 2022-11-10 9:56 ` [PATCH] media: aspeed: Use v4l2_dbg to replace v4l2_warn to avoid log spam Jammy Huang 2022-11-22 23:12 ` Zev Weiss 2022-11-22 23:12 ` Zev Weiss 2022-11-22 23:12 ` Zev Weiss 2022-11-25 3:59 ` Jammy Huang 2022-11-25 3:59 ` Jammy Huang 2022-11-25 3:59 ` Jammy Huang 2022-11-23 8:08 ` Paul Menzel 2022-11-23 8:08 ` Paul Menzel 2022-11-23 8:08 ` Paul Menzel 2022-11-25 3:23 ` Jammy Huang 2022-11-25 3:23 ` Jammy Huang 2022-11-25 3:23 ` Jammy Huang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221110095611.522-1-jammy_huang@aspeedtech.com \ --to=jammy_huang@aspeedtech.com \ --cc=andrew@aj.id.au \ --cc=eajames@linux.ibm.com \ --cc=hverkuil-cisco@xs4all.nl \ --cc=joel@jms.id.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-aspeed@lists.ozlabs.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=mchehab@kernel.org \ --cc=openbmc@lists.ozlabs.org \ --cc=zev@bewilderbeest.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.