From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Frank Wunderlich <frank-w@public-files.de>,
Ryder Lee <ryder.lee@mediatek.com>,
Jianjun Wang <jianjun.wang@mediatek.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Paolo Abeni <pabeni@redhat.com>,
Lorenzo Bianconi <lorenzo@kernel.org>,
Bo Jiao <Bo.Jiao@mediatek.com>,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org, linux-usb@vger.kernel.org
Subject: [PATCH v6 00/11] Add BananaPi R3
Date: Fri, 18 Nov 2022 20:01:15 +0100 [thread overview]
Message-ID: <20221118190126.100895-1-linux@fw-web.de> (raw)
From: Frank Wunderlich <frank-w@public-files.de>
This Series adds some Nodes to mt7986 devicetree and the BananaPi R3
This version is rebased on Matthias' DTS64 next Branch from 2022/11/11.
i included sams series for mt7986 DTS with small changes
https://patchwork.kernel.org/project/linux-mediatek/cover/20220427124741.18245->
6.2 will support dtso extension for dt overlays:
"kbuild: Allow DTB overlays to built from .dtso named source files"
https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/commit/?h=dt/next&id=363547d2191cbc32ca954ba75d72908712398ff2
There is some discussion about inclusion of dt-overlays and if it is
better to support mmc also by these:
https://patchwork.kernel.org/comment/25092116/
https://patchwork.kernel.org/comment/25085681/
i had run full dtbs-check but i end up with some strange warnings in
ethernet-node that should not come up as phy-handle and sfp/managed
properties are already defined.
phy-handle made optional
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/mediatek,net.yaml#n265
property sfp/managed (which is included for mac subnode in yaml above):
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/ethernet-controller.yaml#n137
changes:
v6:
- dropped regulators from usb-patch as suggested by chunfeng yun
- moved 3v3 regulator to mmc-patch as it is needed for emmc to work
rfbs were tested by sam shih, r3 by me
- dropped RB from AngeloGioacchino from mmc-patch due to this change
- fixed links in coverletter which were broken in v5
- i hope this series is sent without errors now (my mailprovider limited
mails last 2 times while sending part 10)
v5:
- changed usb ranges/reg/unit-adress
- added reviewd-by's except usb-part due to changes
v4:
- dropped RFC prefix
- rebase on matthias' mtk dts-next (for 6.2) branch
- added author information to overlays
- fixed sfp binding error
- added fix for moving wed_pcie node
- readded missing compatible patches
v3:
- changed mmc pull-ups
- added patch for board binding (sent separately before)
- added pcie node in mt7986 (not yet again in r3)
- added dt overlays
Frank Wunderlich (7):
arm64: dts: mt7986: move wed_pcie node
dt-bindings: phy: mediatek,tphy: add support for mt7986
dt-bindings: usb: mtk-xhci: add support for mt7986
dt-bindings: PCI: mediatek-gen3: add SoC based clock config
dt-bindings: PCI: mediatek-gen3: add support for mt7986
arm64: dts: mt7986: add Bananapi R3
arm64: dts: mt7986: add BPI-R3 nand/nor overlays
Sam Shih (4):
arm64: dts: mt7986: add spi related device nodes
arm64: dts: mt7986: add usb related device nodes
arm64: dts: mt7986: add mmc related device nodes
arm64: dts: mt7986: add pcie related device nodes
.../bindings/pci/mediatek-pcie-gen3.yaml | 64 ++-
.../bindings/phy/mediatek,tphy.yaml | 1 +
.../bindings/usb/mediatek,mtk-xhci.yaml | 1 +
arch/arm64/boot/dts/mediatek/Makefile | 4 +
.../mediatek/mt7986a-bananapi-bpi-r3-emmc.dts | 31 ++
.../mediatek/mt7986a-bananapi-bpi-r3-nand.dts | 55 +++
.../mediatek/mt7986a-bananapi-bpi-r3-nor.dts | 69 +++
.../mediatek/mt7986a-bananapi-bpi-r3-sd.dts | 25 +
.../dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi | 446 ++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 155 ++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 162 ++++++-
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 43 ++
12 files changed, 1038 insertions(+), 18 deletions(-)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Frank Wunderlich <frank-w@public-files.de>,
Ryder Lee <ryder.lee@mediatek.com>,
Jianjun Wang <jianjun.wang@mediatek.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Paolo Abeni <pabeni@redhat.com>,
Lorenzo Bianconi <lorenzo@kernel.org>,
Bo Jiao <Bo.Jiao@mediatek.com>,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org, linux-usb@vger.kernel.org
Subject: [PATCH v6 00/11] Add BananaPi R3
Date: Fri, 18 Nov 2022 20:01:15 +0100 [thread overview]
Message-ID: <20221118190126.100895-1-linux@fw-web.de> (raw)
From: Frank Wunderlich <frank-w@public-files.de>
This Series adds some Nodes to mt7986 devicetree and the BananaPi R3
This version is rebased on Matthias' DTS64 next Branch from 2022/11/11.
i included sams series for mt7986 DTS with small changes
https://patchwork.kernel.org/project/linux-mediatek/cover/20220427124741.18245->
6.2 will support dtso extension for dt overlays:
"kbuild: Allow DTB overlays to built from .dtso named source files"
https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/commit/?h=dt/next&id=363547d2191cbc32ca954ba75d72908712398ff2
There is some discussion about inclusion of dt-overlays and if it is
better to support mmc also by these:
https://patchwork.kernel.org/comment/25092116/
https://patchwork.kernel.org/comment/25085681/
i had run full dtbs-check but i end up with some strange warnings in
ethernet-node that should not come up as phy-handle and sfp/managed
properties are already defined.
phy-handle made optional
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/mediatek,net.yaml#n265
property sfp/managed (which is included for mac subnode in yaml above):
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/ethernet-controller.yaml#n137
changes:
v6:
- dropped regulators from usb-patch as suggested by chunfeng yun
- moved 3v3 regulator to mmc-patch as it is needed for emmc to work
rfbs were tested by sam shih, r3 by me
- dropped RB from AngeloGioacchino from mmc-patch due to this change
- fixed links in coverletter which were broken in v5
- i hope this series is sent without errors now (my mailprovider limited
mails last 2 times while sending part 10)
v5:
- changed usb ranges/reg/unit-adress
- added reviewd-by's except usb-part due to changes
v4:
- dropped RFC prefix
- rebase on matthias' mtk dts-next (for 6.2) branch
- added author information to overlays
- fixed sfp binding error
- added fix for moving wed_pcie node
- readded missing compatible patches
v3:
- changed mmc pull-ups
- added patch for board binding (sent separately before)
- added pcie node in mt7986 (not yet again in r3)
- added dt overlays
Frank Wunderlich (7):
arm64: dts: mt7986: move wed_pcie node
dt-bindings: phy: mediatek,tphy: add support for mt7986
dt-bindings: usb: mtk-xhci: add support for mt7986
dt-bindings: PCI: mediatek-gen3: add SoC based clock config
dt-bindings: PCI: mediatek-gen3: add support for mt7986
arm64: dts: mt7986: add Bananapi R3
arm64: dts: mt7986: add BPI-R3 nand/nor overlays
Sam Shih (4):
arm64: dts: mt7986: add spi related device nodes
arm64: dts: mt7986: add usb related device nodes
arm64: dts: mt7986: add mmc related device nodes
arm64: dts: mt7986: add pcie related device nodes
.../bindings/pci/mediatek-pcie-gen3.yaml | 64 ++-
.../bindings/phy/mediatek,tphy.yaml | 1 +
.../bindings/usb/mediatek,mtk-xhci.yaml | 1 +
arch/arm64/boot/dts/mediatek/Makefile | 4 +
.../mediatek/mt7986a-bananapi-bpi-r3-emmc.dts | 31 ++
.../mediatek/mt7986a-bananapi-bpi-r3-nand.dts | 55 +++
.../mediatek/mt7986a-bananapi-bpi-r3-nor.dts | 69 +++
.../mediatek/mt7986a-bananapi-bpi-r3-sd.dts | 25 +
.../dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi | 446 ++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 155 ++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 162 ++++++-
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 43 ++
12 files changed, 1038 insertions(+), 18 deletions(-)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: devicetree@vger.kernel.org, Ryder Lee <ryder.lee@mediatek.com>,
Bo Jiao <Bo.Jiao@mediatek.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-phy@lists.infradead.org,
Kishon Vijay Abraham I <kishon@ti.com>,
Jianjun Wang <jianjun.wang@mediatek.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
Paolo Abeni <pabeni@redhat.com>,
Lorenzo Bianconi <lorenzo@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 00/11] Add BananaPi R3
Date: Fri, 18 Nov 2022 20:01:15 +0100 [thread overview]
Message-ID: <20221118190126.100895-1-linux@fw-web.de> (raw)
From: Frank Wunderlich <frank-w@public-files.de>
This Series adds some Nodes to mt7986 devicetree and the BananaPi R3
This version is rebased on Matthias' DTS64 next Branch from 2022/11/11.
i included sams series for mt7986 DTS with small changes
https://patchwork.kernel.org/project/linux-mediatek/cover/20220427124741.18245->
6.2 will support dtso extension for dt overlays:
"kbuild: Allow DTB overlays to built from .dtso named source files"
https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/commit/?h=dt/next&id=363547d2191cbc32ca954ba75d72908712398ff2
There is some discussion about inclusion of dt-overlays and if it is
better to support mmc also by these:
https://patchwork.kernel.org/comment/25092116/
https://patchwork.kernel.org/comment/25085681/
i had run full dtbs-check but i end up with some strange warnings in
ethernet-node that should not come up as phy-handle and sfp/managed
properties are already defined.
phy-handle made optional
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/mediatek,net.yaml#n265
property sfp/managed (which is included for mac subnode in yaml above):
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/ethernet-controller.yaml#n137
changes:
v6:
- dropped regulators from usb-patch as suggested by chunfeng yun
- moved 3v3 regulator to mmc-patch as it is needed for emmc to work
rfbs were tested by sam shih, r3 by me
- dropped RB from AngeloGioacchino from mmc-patch due to this change
- fixed links in coverletter which were broken in v5
- i hope this series is sent without errors now (my mailprovider limited
mails last 2 times while sending part 10)
v5:
- changed usb ranges/reg/unit-adress
- added reviewd-by's except usb-part due to changes
v4:
- dropped RFC prefix
- rebase on matthias' mtk dts-next (for 6.2) branch
- added author information to overlays
- fixed sfp binding error
- added fix for moving wed_pcie node
- readded missing compatible patches
v3:
- changed mmc pull-ups
- added patch for board binding (sent separately before)
- added pcie node in mt7986 (not yet again in r3)
- added dt overlays
Frank Wunderlich (7):
arm64: dts: mt7986: move wed_pcie node
dt-bindings: phy: mediatek,tphy: add support for mt7986
dt-bindings: usb: mtk-xhci: add support for mt7986
dt-bindings: PCI: mediatek-gen3: add SoC based clock config
dt-bindings: PCI: mediatek-gen3: add support for mt7986
arm64: dts: mt7986: add Bananapi R3
arm64: dts: mt7986: add BPI-R3 nand/nor overlays
Sam Shih (4):
arm64: dts: mt7986: add spi related device nodes
arm64: dts: mt7986: add usb related device nodes
arm64: dts: mt7986: add mmc related device nodes
arm64: dts: mt7986: add pcie related device nodes
.../bindings/pci/mediatek-pcie-gen3.yaml | 64 ++-
.../bindings/phy/mediatek,tphy.yaml | 1 +
.../bindings/usb/mediatek,mtk-xhci.yaml | 1 +
arch/arm64/boot/dts/mediatek/Makefile | 4 +
.../mediatek/mt7986a-bananapi-bpi-r3-emmc.dts | 31 ++
.../mediatek/mt7986a-bananapi-bpi-r3-nand.dts | 55 +++
.../mediatek/mt7986a-bananapi-bpi-r3-nor.dts | 69 +++
.../mediatek/mt7986a-bananapi-bpi-r3-sd.dts | 25 +
.../dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi | 446 ++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 155 ++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 162 ++++++-
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 43 ++
12 files changed, 1038 insertions(+), 18 deletions(-)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Frank Wunderlich <frank-w@public-files.de>,
Ryder Lee <ryder.lee@mediatek.com>,
Jianjun Wang <jianjun.wang@mediatek.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Paolo Abeni <pabeni@redhat.com>,
Lorenzo Bianconi <lorenzo@kernel.org>,
Bo Jiao <Bo.Jiao@mediatek.com>,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org, linux-usb@vger.kernel.org
Subject: [PATCH v6 00/11] Add BananaPi R3
Date: Fri, 18 Nov 2022 20:01:15 +0100 [thread overview]
Message-ID: <20221118190126.100895-1-linux@fw-web.de> (raw)
From: Frank Wunderlich <frank-w@public-files.de>
This Series adds some Nodes to mt7986 devicetree and the BananaPi R3
This version is rebased on Matthias' DTS64 next Branch from 2022/11/11.
i included sams series for mt7986 DTS with small changes
https://patchwork.kernel.org/project/linux-mediatek/cover/20220427124741.18245->
6.2 will support dtso extension for dt overlays:
"kbuild: Allow DTB overlays to built from .dtso named source files"
https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/commit/?h=dt/next&id=363547d2191cbc32ca954ba75d72908712398ff2
There is some discussion about inclusion of dt-overlays and if it is
better to support mmc also by these:
https://patchwork.kernel.org/comment/25092116/
https://patchwork.kernel.org/comment/25085681/
i had run full dtbs-check but i end up with some strange warnings in
ethernet-node that should not come up as phy-handle and sfp/managed
properties are already defined.
phy-handle made optional
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/mediatek,net.yaml#n265
property sfp/managed (which is included for mac subnode in yaml above):
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/ethernet-controller.yaml#n137
changes:
v6:
- dropped regulators from usb-patch as suggested by chunfeng yun
- moved 3v3 regulator to mmc-patch as it is needed for emmc to work
rfbs were tested by sam shih, r3 by me
- dropped RB from AngeloGioacchino from mmc-patch due to this change
- fixed links in coverletter which were broken in v5
- i hope this series is sent without errors now (my mailprovider limited
mails last 2 times while sending part 10)
v5:
- changed usb ranges/reg/unit-adress
- added reviewd-by's except usb-part due to changes
v4:
- dropped RFC prefix
- rebase on matthias' mtk dts-next (for 6.2) branch
- added author information to overlays
- fixed sfp binding error
- added fix for moving wed_pcie node
- readded missing compatible patches
v3:
- changed mmc pull-ups
- added patch for board binding (sent separately before)
- added pcie node in mt7986 (not yet again in r3)
- added dt overlays
Frank Wunderlich (7):
arm64: dts: mt7986: move wed_pcie node
dt-bindings: phy: mediatek,tphy: add support for mt7986
dt-bindings: usb: mtk-xhci: add support for mt7986
dt-bindings: PCI: mediatek-gen3: add SoC based clock config
dt-bindings: PCI: mediatek-gen3: add support for mt7986
arm64: dts: mt7986: add Bananapi R3
arm64: dts: mt7986: add BPI-R3 nand/nor overlays
Sam Shih (4):
arm64: dts: mt7986: add spi related device nodes
arm64: dts: mt7986: add usb related device nodes
arm64: dts: mt7986: add mmc related device nodes
arm64: dts: mt7986: add pcie related device nodes
.../bindings/pci/mediatek-pcie-gen3.yaml | 64 ++-
.../bindings/phy/mediatek,tphy.yaml | 1 +
.../bindings/usb/mediatek,mtk-xhci.yaml | 1 +
arch/arm64/boot/dts/mediatek/Makefile | 4 +
.../mediatek/mt7986a-bananapi-bpi-r3-emmc.dts | 31 ++
.../mediatek/mt7986a-bananapi-bpi-r3-nand.dts | 55 +++
.../mediatek/mt7986a-bananapi-bpi-r3-nor.dts | 69 +++
.../mediatek/mt7986a-bananapi-bpi-r3-sd.dts | 25 +
.../dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi | 446 ++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 155 ++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 162 ++++++-
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 43 ++
12 files changed, 1038 insertions(+), 18 deletions(-)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next reply other threads:[~2022-11-18 19:02 UTC|newest]
Thread overview: 103+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-18 19:01 Frank Wunderlich [this message]
2022-11-18 19:01 ` [PATCH v6 00/11] Add BananaPi R3 Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` [PATCH v6 01/11] arm64: dts: mt7986: move wed_pcie node Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-21 17:04 ` Matthias Brugger
2022-11-21 17:04 ` Matthias Brugger
2022-11-21 17:04 ` Matthias Brugger
2022-11-21 17:04 ` Matthias Brugger
2022-11-18 19:01 ` [PATCH v6 02/11] dt-bindings: phy: mediatek,tphy: add support for mt7986 Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-21 17:04 ` Matthias Brugger
2022-11-21 17:04 ` Matthias Brugger
2022-11-21 17:04 ` Matthias Brugger
2022-11-21 17:04 ` Matthias Brugger
2022-11-18 19:01 ` [PATCH v6 03/11] dt-bindings: usb: mtk-xhci: " Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-21 17:04 ` Matthias Brugger
2022-11-21 17:04 ` Matthias Brugger
2022-11-21 17:04 ` Matthias Brugger
2022-11-21 17:04 ` Matthias Brugger
2022-11-18 19:01 ` [PATCH v6 04/11] dt-bindings: PCI: mediatek-gen3: add SoC based clock config Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-21 17:05 ` Matthias Brugger
2022-11-21 17:05 ` Matthias Brugger
2022-11-21 17:05 ` Matthias Brugger
2022-11-21 17:05 ` Matthias Brugger
2022-11-18 19:01 ` [PATCH v6 05/11] dt-bindings: PCI: mediatek-gen3: add support for mt7986 Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-21 17:13 ` Matthias Brugger
2022-11-21 17:13 ` Matthias Brugger
2022-11-21 17:13 ` Matthias Brugger
2022-11-21 17:13 ` Matthias Brugger
2022-11-18 19:01 ` [PATCH v6 06/11] arm64: dts: mt7986: add spi related device nodes Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-21 17:20 ` Matthias Brugger
2022-11-21 17:20 ` Matthias Brugger
2022-11-21 17:20 ` Matthias Brugger
2022-11-21 17:20 ` Matthias Brugger
2022-11-18 19:01 ` [PATCH v6 07/11] arm64: dts: mt7986: add usb " Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-21 7:38 ` Chunfeng Yun (云春峰)
2022-11-21 7:38 ` Chunfeng Yun (云春峰)
2022-11-21 7:38 ` Chunfeng Yun (云春峰)
2022-11-21 7:38 ` Chunfeng Yun (云春峰)
2022-11-18 19:01 ` [PATCH v6 08/11] arm64: dts: mt7986: add mmc " Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` [PATCH v6 09/11] arm64: dts: mt7986: add pcie " Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` [PATCH v6 10/11] arm64: dts: mt7986: add Bananapi R3 Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` [PATCH v6 11/11] arm64: dts: mt7986: add BPI-R3 nand/nor overlays Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 19:01 ` Frank Wunderlich
2022-11-18 21:39 ` Rob Herring
2022-11-18 21:39 ` Rob Herring
2022-11-18 21:39 ` Rob Herring
2022-11-18 21:39 ` Rob Herring
2022-11-18 21:45 ` Rob Herring
2022-11-18 21:45 ` Rob Herring
2022-11-18 21:45 ` Rob Herring
2022-11-18 21:45 ` Rob Herring
2022-11-18 22:05 ` Frank Wunderlich
2022-11-18 22:05 ` Frank Wunderlich
2022-11-18 22:05 ` Frank Wunderlich
2022-11-08 14:45 ` Rob Herring
2022-11-08 14:45 ` Rob Herring
2022-11-08 14:45 ` Rob Herring
2022-11-19 7:19 ` Frank Wunderlich
2022-11-19 7:19 ` Frank Wunderlich
2022-11-19 7:19 ` Frank Wunderlich
2022-11-20 16:12 ` Rob Herring
2022-11-20 16:12 ` Rob Herring
2022-11-20 16:12 ` Rob Herring
2022-11-20 16:12 ` Rob Herring
2022-11-20 16:47 ` Aw: " Frank Wunderlich
2022-11-20 16:47 ` Frank Wunderlich
2022-11-20 16:47 ` Frank Wunderlich
2022-11-26 14:59 ` Frank Wunderlich
2022-11-26 22:49 ` Rob Herring
2022-11-27 8:09 ` Aw: " Frank Wunderlich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221118190126.100895-1-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=Bo.Jiao@mediatek.com \
--cc=bhelgaas@google.com \
--cc=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=frank-w@public-files.de \
--cc=gregkh@linuxfoundation.org \
--cc=jianjun.wang@mediatek.com \
--cc=kishon@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=pabeni@redhat.com \
--cc=robh+dt@kernel.org \
--cc=ryder.lee@mediatek.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.