[PATCH v2 10/12] arm64: dts: qcom: sm6115: Add i2c/spi nodes

[Adam Skladowski <a39.skl@gmail.com>]

Add I2C/SPI nodes for SM6115.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 290 +++++++++++++++++++++++++++
 1 file changed, 290 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index b30a5485671d..e676b9d117e3 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/qcom,gcc-sm6115.h>
 #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -365,6 +366,90 @@ tlmm: pinctrl@500000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1","gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio4", "gpio5", "gpio69", "gpio70";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio6", "gpio7", "gpio71", "gpio80";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio12", "gpio13", "gpio96", "gpio97";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio14", "gpio15", "gpio16", "gpio17";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
 			sdc1_state_on: sdc1-on-state {
 				clk-pins {
 					pins = "sdc1_clk";
@@ -701,6 +786,211 @@ gpi_dma0: dma-controller@4a00000 {
 			status = "disabled";
 		};
 
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x04ac0000 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			iommus = <&apps_smmu 0xe3 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a80000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a80000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a8c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@4a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a8c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@4a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@4a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a94000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@4a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a94000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		usb_1: usb@4ef8800 {
 			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
 			reg = <0x04ef8800 0x400>;
-- 
2.25.1