All of lore.kernel.org
 help / color / mirror / Atom feed
From: Victor Lim <vlim@gigadevice.com>
To: u-boot@lists.denx.de
Cc: vigneshr@ti.com, jagan@amarulasolutions.com,
	michal.simek@xilinx.com, vikhyat.goyal@amd.com,
	ashok.reddy.soma@amd.com, Victor Lim <vlim@gigadevice.com>
Subject: [PATCH 4/4] mtd: spi-nor-ids: add gigadevice part #
Date: Tue, 20 Dec 2022 06:48:18 +0800	[thread overview]
Message-ID: <20221219224818.6801-5-vlim@gigadevice.com> (raw)
In-Reply-To: <20221219224818.6801-1-vlim@gigadevice.com>

Adding the following parts to the list

gd25b256: 3V QSPI, QE=1, 256Mbit
gd25b512: 3V QSPI, QE=1, 512Mbit
gd55b01g: 3V QSPI, QE=1, 1Gbit
gd55b02g: 3V QSPI, QE=1, 2Gbit
gd25f64: 3V QSPI, QE=1, 64Mbit, high performance
gd25f128: 3V QSPI, QE=1, 128Mbit, high performance
gd25f256: 3V QSPI, QE=1, 256Mbit, high performance
gd55f512: 3V QSPI, QE=1, 512Mbit, high performance
gd25t512: 3V QSPI, 512Mbit, ultra high performance
gd55t01g: 3V QSPI, 1Gbit, ultra high performance
gd55t02g: 3V QSPI, 2Gbit, ultra high performance
gd25x512: 3V OSPI, 512Mbit, ultra high performance
gd55x01g: 3V OSPI, 1Gbit, ultra high performance
gd55x02g: 3V OSPI, 2Gbit, ultra high performance
gd25lb256: 1.8V QSPI, QE=1, 256Mbit
gd25lb512: 1.8V QSPI, QE=1, 512Mbit
gd55lb01g: 1.8V QSPI, QE=1, 1Gbit
gd55lb02g: 1.8V QSPI, QE=1, 2Gbit
gd25lf64: 1.8V QSPI, QE=1, 64Mbit, high performance
gd25lf128: 1.8V QSPI, QE=1, 128Mbit, high performance
gd25lf256: 1.8V QSPI, QE=1, 256Mbit, high performance
gd55lf512: 1.8V QSPI, QE=1, 512Mbit, high performance
gd25lt512: 1.8V QSPI, 512Mbit, ultra high performance
gd55lt01g: 1.8V QSPI, 1Gbit, ultra high performance
gd55lt02g: 1.8V QSPI, 2Gbit, ultra high performance
gd25lx512: 1.8V OSPI, 512Mbit, ultra high performance
gd55lx01g: 1.8V OSPI, 1Gbit, ultra high performance
gd55lx02g: 1.8V OSPI, 2Gbit, ultra high performance

This is the link to the datasheet.
https://www.gigadevice.com/products/memory/flash/spi-nor/

Signed-off-by: Victor Lim <vlim@gigadevice.com>
---
 drivers/mtd/spi/spi-nor-ids.c | 68 +++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index 74e93d6209..ba73eef87f 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -118,6 +118,36 @@ const struct flash_info spi_nor_ids[] = {
 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
 	},
+	/* adding these 3V QSPI flash parts */
+	{INFO("gd25b256", 0xc84019, 0, 64 * 1024, 512,	SECT_4K |
+	SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)	},
+	{INFO("gd25b512", 0xc8471A, 0, 64 * 1024, 1024,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55b01g", 0xc8471B, 0, 64 * 1024, 2048,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55b02g", 0xc8471C, 0, 64 * 1024, 4096,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd25f64", 0xc84317, 0, 64 * 1024, 128,	SECT_4K |
+	SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)},
+	{INFO("gd25f128", 0xc84318, 0, 64 * 1024, 256,	SECT_4K	|
+	SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)},
+	{INFO("gd25f256", 0xc84319, 0, 64 * 1024, 512,	SECT_4K |
+	SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55f512", 0xc8431A, 0, 64 * 1024, 1024,	SECT_4K |
+	SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd25t512", 0xc8461A, 0, 64 * 1024, 1024,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55t01g", 0xc8461B, 0, 64 * 1024, 2048,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55t02g",	0xc8461C, 0, 64 * 1024, 4096,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	/* adding these 3V OSPI flash parts */
+	{INFO("gd25x512", 0xc8481A, 0, 64 * 1024, 1024,	SECT_4K |
+	SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55x01g", 0xc8481B, 0, 64 * 1024, 2048,	SECT_4K |
+	SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55x02g", 0xc8481C, 0, 64 * 1024, 4096,	SECT_4K |
+	SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)},
 	{
 		INFO("gd25lq128", 0xc86018, 0, 64 * 1024, 256,
 			SECT_4K | SPI_NOR_DUAL_READ |
@@ -128,10 +158,48 @@ const struct flash_info spi_nor_ids[] = {
 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
 	},
+	/* adding these 1.8V QSPI flash parts */
+	{INFO("gd25lb256", 0xc86719, 0, 64 * 1024, 512,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd25lb512", 0xc8671A, 0, 64 * 1024, 1024,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55lb01g", 0xc8671B, 0, 64 * 1024, 2048,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55lb02g", 0xc8671C, 0, 64 * 1024, 4096,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd25lf80", 0xc86314, 0, 64 * 1024, 16,	SECT_4K |
+	SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)},
+	{INFO("gd25lf16", 0xc86315, 0, 64 * 1024, 32,	SECT_4K |
+	SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)},
+	{INFO("gd25lf32", 0xc86316, 0, 64 * 1024, 64,	SECT_4K |
+	SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)	},
+	{INFO("gd25lf64", 0xc86317, 0, 64 * 1024, 128,	SECT_4K |
+	SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)	},
+	{INFO("gd25lf128", 0xc86318, 0, 64 * 1024, 256,	SECT_4K |
+	SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)	},
+	{INFO("gd25lf255", 0xc86319, 0, 64 * 1024, 512,	SECT_4K |
+	SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd25lf511", 0xc8631A, 0, 64 * 1024, 1024,	SECT_4K |
+	SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd25lt256", 0xc86619, 0, 64 * 1024, 512,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd25lt512", 0xc8661A, 0, 64 * 1024, 1024,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55lt01g", 0xc8661B, 0, 64 * 1024, 2048,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55lt02g", 0xc8661C, 0, 64 * 1024, 4096,	SECT_4K |
+	SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)},
 	{
 		INFO("gd25lx256e", 0xc86819, 0, 64 * 1024, 512,
 		     SECT_4K | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)
 	},
+	/* adding these 1.8V OSPI flash parts */
+	{INFO("gd25lx512", 0xc8681A, 0, 64 * 1024, 1024,	SECT_4K |
+	SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55lx01g", 0xc8681B, 0, 64 * 1024, 2048,	SECT_4K |
+	SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)},
+	{INFO("gd55lx02g", 0xc8681C, 0, 64 * 1024, 4096,	SECT_4K |
+	SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)},
 #endif
 #ifdef CONFIG_SPI_FLASH_ISSI		/* ISSI */
 	/* ISSI */
-- 
2.25.1


  parent reply	other threads:[~2022-12-20 11:49 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-19 22:48 [PATCH 0/4] Enable gigadevice and add new part #s Victor Lim
2022-12-19 22:48 ` [PATCH 1/4] xilinx: zynq: Enable gigadevice Victor Lim
2022-12-19 22:48 ` [PATCH 2/4] arm64: zynqmp: " Victor Lim
2022-12-19 22:48 ` [PATCH 3/4] xilinx: versal: Enable gigadevice parts Victor Lim
2022-12-19 22:48 ` Victor Lim [this message]
2023-01-03 11:02 ` [PATCH 0/4] Enable gigadevice and add new part #s Michal Simek
2023-01-04 18:50   ` Vlim
2023-01-05  7:25     ` Michal Simek
2023-01-05 19:47       ` Vlim
2023-01-06  7:14         ` Michal Simek
2023-01-06 19:53           ` Vlim
2023-01-09  7:59             ` Michal Simek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221219224818.6801-5-vlim@gigadevice.com \
    --to=vlim@gigadevice.com \
    --cc=ashok.reddy.soma@amd.com \
    --cc=jagan@amarulasolutions.com \
    --cc=michal.simek@xilinx.com \
    --cc=u-boot@lists.denx.de \
    --cc=vigneshr@ti.com \
    --cc=vikhyat.goyal@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.