All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anand Moon <anand@edgeble.ai>
To: Heiko Stuebner <heiko@sntech.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Anand Moon <anand@edgeble.ai>,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCHv2 linux-next 4/4] ARM: dts: rockchip: rv1126: Enable Ethernet for Neu2-IO
Date: Mon, 26 Dec 2022 06:36:22 +0000	[thread overview]
Message-ID: <20221226063625.1913-4-anand@edgeble.ai> (raw)
In-Reply-To: <20221226063625.1913-1-anand@edgeble.ai>

Rockchip RV1126 has GMAC 10/100/1000M ethernet controller.
Enable ethernet node on Neu2-IO board.

Signed-off-by: Anand Moon <anand@edgeble.ai>
---
drop SoB of Jagan Teki
---
 arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts | 37 ++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
index dded0a12f0cd..bd592026eae6 100644
--- a/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
+++ b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
@@ -22,6 +22,43 @@ chosen {
 	};
 };
 
+&gmac {
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&phy>;
+	assigned-clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>,
+			<&cru CLK_GMAC_ETHERNET_OUT>;
+	assigned-clock-parents = <&cru CLK_GMAC_SRC_M1>, <&cru RGMII_MODE_CLK>;
+	assigned-clock-rates = <125000000>, <0>, <25000000>;
+	phy-supply = <&vcc_3v3>;
+	tx_delay = <0x2a>;
+	rx_delay = <0x1a>;
+	status = "okay";
+};
+
+&mdio {
+	phy: phy@0 {
+		compatible = "ethernet-phy-id001c.c916",
+			       "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy_rst: eth-phy-rst {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
-- 
2.39.0


WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <anand@edgeble.ai>
To: Heiko Stuebner <heiko@sntech.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Anand Moon <anand@edgeble.ai>,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCHv2 linux-next 4/4] ARM: dts: rockchip: rv1126: Enable Ethernet for Neu2-IO
Date: Mon, 26 Dec 2022 06:36:22 +0000	[thread overview]
Message-ID: <20221226063625.1913-4-anand@edgeble.ai> (raw)
In-Reply-To: <20221226063625.1913-1-anand@edgeble.ai>

Rockchip RV1126 has GMAC 10/100/1000M ethernet controller.
Enable ethernet node on Neu2-IO board.

Signed-off-by: Anand Moon <anand@edgeble.ai>
---
drop SoB of Jagan Teki
---
 arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts | 37 ++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
index dded0a12f0cd..bd592026eae6 100644
--- a/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
+++ b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
@@ -22,6 +22,43 @@ chosen {
 	};
 };
 
+&gmac {
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&phy>;
+	assigned-clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>,
+			<&cru CLK_GMAC_ETHERNET_OUT>;
+	assigned-clock-parents = <&cru CLK_GMAC_SRC_M1>, <&cru RGMII_MODE_CLK>;
+	assigned-clock-rates = <125000000>, <0>, <25000000>;
+	phy-supply = <&vcc_3v3>;
+	tx_delay = <0x2a>;
+	rx_delay = <0x1a>;
+	status = "okay";
+};
+
+&mdio {
+	phy: phy@0 {
+		compatible = "ethernet-phy-id001c.c916",
+			       "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy_rst: eth-phy-rst {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
-- 
2.39.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <anand@edgeble.ai>
To: Heiko Stuebner <heiko@sntech.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Anand Moon <anand@edgeble.ai>,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCHv2 linux-next 4/4] ARM: dts: rockchip: rv1126: Enable Ethernet for Neu2-IO
Date: Mon, 26 Dec 2022 06:36:22 +0000	[thread overview]
Message-ID: <20221226063625.1913-4-anand@edgeble.ai> (raw)
In-Reply-To: <20221226063625.1913-1-anand@edgeble.ai>

Rockchip RV1126 has GMAC 10/100/1000M ethernet controller.
Enable ethernet node on Neu2-IO board.

Signed-off-by: Anand Moon <anand@edgeble.ai>
---
drop SoB of Jagan Teki
---
 arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts | 37 ++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
index dded0a12f0cd..bd592026eae6 100644
--- a/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
+++ b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
@@ -22,6 +22,43 @@ chosen {
 	};
 };
 
+&gmac {
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&phy>;
+	assigned-clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>,
+			<&cru CLK_GMAC_ETHERNET_OUT>;
+	assigned-clock-parents = <&cru CLK_GMAC_SRC_M1>, <&cru RGMII_MODE_CLK>;
+	assigned-clock-rates = <125000000>, <0>, <25000000>;
+	phy-supply = <&vcc_3v3>;
+	tx_delay = <0x2a>;
+	rx_delay = <0x1a>;
+	status = "okay";
+};
+
+&mdio {
+	phy: phy@0 {
+		compatible = "ethernet-phy-id001c.c916",
+			       "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy_rst: eth-phy-rst {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
-- 
2.39.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-12-26  6:37 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-26  6:36 [PATCHv2 linux-next 1/4] dt-bindings: net: rockchip-dwmac: fix rv1126 compatible warning Anand Moon
2022-12-26  6:36 ` Anand Moon
2022-12-26  6:36 ` Anand Moon
2022-12-26  6:36 ` [PATCHv2 linux-next 2/4] ARM: dts: rockchip: rv1126: Add rgmiim1 pin-control Anand Moon
2022-12-26  6:36   ` Anand Moon
2022-12-26  6:36   ` Anand Moon
2022-12-26  6:36 ` [PATCHv2 linux-next 3/4] ARM: dts: rockchip: rv1126: Add GMAC node Anand Moon
2022-12-26  6:36   ` Anand Moon
2022-12-26  6:36   ` Anand Moon
2022-12-26  9:50   ` Jagan Teki
2022-12-26  9:50     ` Jagan Teki
2022-12-26  9:50     ` Jagan Teki
2022-12-26 11:12     ` Anand Moon
2022-12-26 11:12       ` Anand Moon
2022-12-26 11:12       ` Anand Moon
2022-12-26  6:36 ` Anand Moon [this message]
2022-12-26  6:36   ` [PATCHv2 linux-next 4/4] ARM: dts: rockchip: rv1126: Enable Ethernet for Neu2-IO Anand Moon
2022-12-26  6:36   ` Anand Moon
2022-12-26  9:52   ` Jagan Teki
2022-12-26  9:52     ` Jagan Teki
2022-12-26  9:52     ` Jagan Teki
2022-12-26 10:20     ` Anand Moon
2022-12-26 10:20       ` Anand Moon
2022-12-26 10:20       ` Anand Moon
2022-12-26 12:46   ` Johan Jonker
2022-12-26 12:46     ` Johan Jonker
2022-12-26 12:46     ` Johan Jonker
2022-12-26 15:22     ` Anand Moon
2022-12-26 15:22       ` Anand Moon
2022-12-26 15:22       ` Anand Moon
2022-12-26  9:50 ` [PATCHv2 linux-next 1/4] dt-bindings: net: rockchip-dwmac: fix rv1126 compatible warning Jagan Teki
2022-12-26  9:50   ` Jagan Teki
2022-12-26  9:50   ` Jagan Teki
2022-12-26 22:01 ` Rob Herring
2022-12-26 22:01   ` Rob Herring
2022-12-26 22:01   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221226063625.1913-4-anand@edgeble.ai \
    --to=anand@edgeble.ai \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.