Re: [PATCHv2 linux-next 3/4] ARM: dts: rockchip: rv1126: Add GMAC node

From: Anand Moon <anand@edgeble.ai>
To: Jagan Teki <jagan@edgeble.ai>
Cc: Heiko Stuebner <heiko@sntech.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Richard Cochran <richardcochran@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCHv2 linux-next 3/4] ARM: dts: rockchip: rv1126: Add GMAC node
Date: Mon, 26 Dec 2022 16:42:12 +0530	[thread overview]
Message-ID: <CACF1qnf+gAWqAqrqDVd_rtUJvnkB4soyxURkOuikmaRrrt1JDg@mail.gmail.com> (raw)
In-Reply-To: <CA+VMnFwq=iHBMtpu6QQKdPDoMz8zU-4WyNOJmvHaCRgXx4RVNg@mail.gmail.com>

Hi Jagan,

Thanks for the review comments.

On Mon, 26 Dec 2022 at 15:20, Jagan Teki <jagan@edgeble.ai> wrote:
>
> On Mon, 26 Dec 2022 at 12:07, Anand Moon <anand@edgeble.ai> wrote:
> >
> > Rockchip RV1126 has GMAC 10/100/1000M ethernet controller
> > add GMAC node for RV1126 SoC.
> >
> > Signed-off-by: Anand Moon <anand@edgeble.ai>
> > ---
> > drop SoB of Jagan Teki
> > ---
> >  arch/arm/boot/dts/rv1126.dtsi | 63 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 63 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/rv1126.dtsi b/arch/arm/boot/dts/rv1126.dtsi
> > index 1cb43147e90b..bae318c1d839 100644
> > --- a/arch/arm/boot/dts/rv1126.dtsi
> > +++ b/arch/arm/boot/dts/rv1126.dtsi
> > @@ -90,6 +90,69 @@ xin24m: oscillator {
> >                 #clock-cells = <0>;
> >         };
> >
> > +       gmac_clkin_m0: external-gmac-clockm0 {
> > +               compatible = "fixed-clock";
> > +               clock-frequency = <125000000>;
> > +               clock-output-names = "clk_gmac_rgmii_clkin_m0";
> > +               #clock-cells = <0>;
> > +       };
> > +
> > +       gmac_clkini_m1: external-gmac-clockm1 {
> > +               compatible = "fixed-clock";
> > +               clock-frequency = <125000000>;
> > +               clock-output-names = "clk_gmac_rgmii_clkin_m1";
> > +               #clock-cells = <0>;
> > +       };
>
> These seems not needed,

Ok, I will drop this in next version.

Thanks
-Anand