From: Alexander Stein <alexander.stein@ew.tq-group.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>, Russell King <linux@armlinux.org.uk>, Marek Vasut <marex@denx.de>, Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Alexander Stein <alexander.stein@ew.tq-group.com>, soc@kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/9] ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree Date: Thu, 19 Jan 2023 15:42:29 +0100 [thread overview] Message-ID: <20230119144236.3541751-3-alexander.stein@ew.tq-group.com> (raw) In-Reply-To: <20230119144236.3541751-1-alexander.stein@ew.tq-group.com> Add device tree for the MBLS102xA mainboard with TQMLS1021A SoM. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/ls1021a-tqmls1021a-mbls1021a.dts | 409 ++++++++++++++++++ arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi | 93 ++++ 3 files changed, 503 insertions(+) create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d0c07867aeabe..44b5ed44b13d6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -802,6 +802,7 @@ dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-iot.dtb \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ + ls1021a-tqmls1021a-mbls1021a.dtb \ ls1021a-tsn.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts new file mode 100644 index 0000000000000..21da171b9f38e --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts @@ -0,0 +1,409 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "ls1021a-tqmls1021a.dtsi" + +/ { + model = "TQMLS102xA SOM on MBLS102xA"; + compatible = "tq,ls1021a-tqmls1021a-mbls102xa", "tq,ls1021a-tqmls1021a", "fsl,ls1021a"; + + audio_mclk: audio-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + backlight_dcu: backlight { + compatible = "gpio-backlight"; + gpios = <&pca9530 0 GPIO_ACTIVE_LOW>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + switch-1 { + label = "S6"; + linux,code = <BTN_0>; + gpios = <&pca9554_0 0 GPIO_ACTIVE_LOW>; + }; + + btn2: switch-2 { + label = "S7"; + linux,code = <BTN_1>; + gpios = <&pca9554_0 1 GPIO_ACTIVE_LOW>; + }; + + switch-3 { + label = "S8"; + linux,code = <BTN_2>; + gpios = <&pca9554_0 2 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <0>; + gpios = <&pca9554_2 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&pca9554_2 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <2>; + gpios = <&pca9554_2 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <0>; + gpios = <&pca9554_2 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + lvds_encoder: lvds-encoder { + compatible = "ti,sn75lvds83", "lvds-encoder"; + power-supply = <®_3p3v>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_encoder_in: endpoint {}; + }; + + port@1 { + reg = <1>; + + lvds_encoder_out: endpoint {}; + }; + }; + }; + + reg_1p2v: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "1P2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + vin-supply = <®_3p3v>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + hdmi_out: hdmi { + compatible = "hdmi-connector"; + type = "a"; + ddc-i2c-bus = <&i2c0>; + status = "disabled"; + + port { + hdmi_in: endpoint { + remote-endpoint = <&sii9022a_out>; + }; + }; + }; + + display: panel { + backlight = <&backlight_dcu>; + enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + panel_in: endpoint {}; + }; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "ls1021a-mbls1021a-tlv320aic32"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + }; + +}; + +&can0 { + status = "okay"; + xceiver-supply = <®_3p3v>; +}; + +&can1 { + status = "okay"; + xceiver-supply = <®_3p3v>; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; +}; + +&enet0 { + phy-handle = <&rgmii_phy0c>; + phy-mode = "rgmii-id"; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy03>; + phy-mode = "sgmii"; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy04>; + phy-mode = "rgmii-id"; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&audio_mclk>; + clock-names = "mclk"; + ldoin-supply = <®_3p3v>; + iov-supply = <®_3p3v>; + }; + + pca9554_0: gpio-expander@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_3p3v>; + gpio-line-names = "BUTTON0", "BUTTON1", + "BUTTON2", "EMMC_SEL", + "DIP2", "DIP3", + "EXT_TOUCH_INT", "GPIO_1"; + }; + + pca9554_1: gpio-expander@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_3p3v>; + gpio-line-names = "PCIE_PWR_EN", "MPCIE_DISABLE#", + "MPCIE_WAKE#", "LCD_BLT_EN", + "LCD_PWR_EN", "EC1_PHY_PWDN", + "EC3_PHY_PWDN", "SGMII_PHY_PWDN"; + }; + + pca9554_2: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&extirq>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_3p3v>; + gpio-line-names = "MUX_SEL0", "MUX_SEL1", + "MUX_SEL2", "MUX_SEL3", + "V95", "V96", "V97", "V98"; + }; + + sii9022a: hdmi-transmitter@3b { + compatible = "sil,sii9022"; + reg = <0x3b>; + iovcc-supply = <®_3p3v>; + cvcc12-supply = <®_1p2v>; + interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>; + #sound-dai-cells = <0>; + sil,i2s-data-lanes = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022a_in: endpoint {}; + }; + + port@1 { + reg = <1>; + + sii9022a_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + + stmpe811: touchscreen@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <®_3p3v>; + vio-supply = <®_3p3v>; + status = "okay"; + + stmpe_gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + /* GPIO 5-7 used for touch */ + st,norequest-mask = <0xf0>; + gpio-line-names = "GPIO_ADC_I2C1_1", + "GPIO_ADC_I2C1_2", + "GPIO_ADC_I2C1_3", + "GPIO_ADC_I2C1_4"; + }; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + status = "disabled"; + }; + }; + + pca9530: leds@60 { + compatible = "nxp,pca9530"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "PWM_0", "PWM_1"; + + gpio_pwm_0 { + label = "pca9530:pwm0"; + type = <PCA9532_TYPE_GPIO>; + }; + + gpio_pwm_1 { + label = "pca9530:pwm1"; + type = <PCA9532_TYPE_GPIO>; + }; + }; + +}; + +&i2c1 { + status = "okay"; +}; + +&lpuart0 { + status = "okay"; + linux,rs485-enabled-at-boot-time; +}; + +&mdio0 { + sgmii_phy03: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x03>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,dp83867-rxctrl-strap-quirk; + }; + + rgmii_phy04: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x04>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + rgmii_phy0c: ethernet-phy@c { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0c>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; +}; + +&pwm6 { + status = "okay"; +}; + +&pwm7 { + status = "okay"; +}; + +&sai1 { + status = "okay"; +}; + +&sata { + /delete-property/ dma-coherent; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb3 { + /* + * Although DR connector, VBUS is always driven, so + * restrict to host mode. + */ + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi new file mode 100644 index 0000000000000..1ab518c489252 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include "ls1021a.dtsi" + +/ { + model = "TQMLS102xA SOM"; + compatible = "tq,ls1021a-tqmls1021a", "fsl,ls1021a"; + + reg_3p3v_som: regulator-3p3v-som { + compatible = "regulator-fixed"; + regulator-name = "3P3V_SOM"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&esdhc { + compatible = "fsl,esdhc", "fsl,ls1021a-esdhc"; + /* e-MMC over 8 data lines */ + bus-width = <8>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + mc34vr500: pmic@8 { + reg = <0x08>; + status = "disabled"; + }; + + pmc0: pmc@11 { + reg = <0x11>; + status = "disabled"; + }; + + sa56004: temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <®_3p3v_som>; + }; + + adm1069: supervisor@4f { + reg = <0x4f>; + status = "disabled"; + }; + + rtc0: rtc@51 { + compatible = "nxp,pcf85063a"; + quartz-load-femtofarads = <12500>; + reg = <0x51>; + }; + + m24c64_54: eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + read-only; + vcc-supply = <®_3p3v_som>; + }; +}; + +&mdio0 { + tbi1: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; +}; + +&scfg { + reg = <0x0 0x1570000 0x0 0x0e00>; +}; + +&qspi { + status = "okay"; + + qflash0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <0>; + }; +}; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Alexander Stein <alexander.stein@ew.tq-group.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>, Russell King <linux@armlinux.org.uk>, Marek Vasut <marex@denx.de>, Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Alexander Stein <alexander.stein@ew.tq-group.com>, soc@kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/9] ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree Date: Thu, 19 Jan 2023 15:42:29 +0100 [thread overview] Message-ID: <20230119144236.3541751-3-alexander.stein@ew.tq-group.com> (raw) In-Reply-To: <20230119144236.3541751-1-alexander.stein@ew.tq-group.com> Add device tree for the MBLS102xA mainboard with TQMLS1021A SoM. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/ls1021a-tqmls1021a-mbls1021a.dts | 409 ++++++++++++++++++ arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi | 93 ++++ 3 files changed, 503 insertions(+) create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d0c07867aeabe..44b5ed44b13d6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -802,6 +802,7 @@ dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-iot.dtb \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ + ls1021a-tqmls1021a-mbls1021a.dtb \ ls1021a-tsn.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts new file mode 100644 index 0000000000000..21da171b9f38e --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts @@ -0,0 +1,409 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "ls1021a-tqmls1021a.dtsi" + +/ { + model = "TQMLS102xA SOM on MBLS102xA"; + compatible = "tq,ls1021a-tqmls1021a-mbls102xa", "tq,ls1021a-tqmls1021a", "fsl,ls1021a"; + + audio_mclk: audio-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + backlight_dcu: backlight { + compatible = "gpio-backlight"; + gpios = <&pca9530 0 GPIO_ACTIVE_LOW>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + switch-1 { + label = "S6"; + linux,code = <BTN_0>; + gpios = <&pca9554_0 0 GPIO_ACTIVE_LOW>; + }; + + btn2: switch-2 { + label = "S7"; + linux,code = <BTN_1>; + gpios = <&pca9554_0 1 GPIO_ACTIVE_LOW>; + }; + + switch-3 { + label = "S8"; + linux,code = <BTN_2>; + gpios = <&pca9554_0 2 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <0>; + gpios = <&pca9554_2 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&pca9554_2 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <2>; + gpios = <&pca9554_2 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <0>; + gpios = <&pca9554_2 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + lvds_encoder: lvds-encoder { + compatible = "ti,sn75lvds83", "lvds-encoder"; + power-supply = <®_3p3v>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_encoder_in: endpoint {}; + }; + + port@1 { + reg = <1>; + + lvds_encoder_out: endpoint {}; + }; + }; + }; + + reg_1p2v: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "1P2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + vin-supply = <®_3p3v>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + hdmi_out: hdmi { + compatible = "hdmi-connector"; + type = "a"; + ddc-i2c-bus = <&i2c0>; + status = "disabled"; + + port { + hdmi_in: endpoint { + remote-endpoint = <&sii9022a_out>; + }; + }; + }; + + display: panel { + backlight = <&backlight_dcu>; + enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + panel_in: endpoint {}; + }; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "ls1021a-mbls1021a-tlv320aic32"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + }; + +}; + +&can0 { + status = "okay"; + xceiver-supply = <®_3p3v>; +}; + +&can1 { + status = "okay"; + xceiver-supply = <®_3p3v>; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; +}; + +&enet0 { + phy-handle = <&rgmii_phy0c>; + phy-mode = "rgmii-id"; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy03>; + phy-mode = "sgmii"; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy04>; + phy-mode = "rgmii-id"; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&audio_mclk>; + clock-names = "mclk"; + ldoin-supply = <®_3p3v>; + iov-supply = <®_3p3v>; + }; + + pca9554_0: gpio-expander@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_3p3v>; + gpio-line-names = "BUTTON0", "BUTTON1", + "BUTTON2", "EMMC_SEL", + "DIP2", "DIP3", + "EXT_TOUCH_INT", "GPIO_1"; + }; + + pca9554_1: gpio-expander@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_3p3v>; + gpio-line-names = "PCIE_PWR_EN", "MPCIE_DISABLE#", + "MPCIE_WAKE#", "LCD_BLT_EN", + "LCD_PWR_EN", "EC1_PHY_PWDN", + "EC3_PHY_PWDN", "SGMII_PHY_PWDN"; + }; + + pca9554_2: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&extirq>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_3p3v>; + gpio-line-names = "MUX_SEL0", "MUX_SEL1", + "MUX_SEL2", "MUX_SEL3", + "V95", "V96", "V97", "V98"; + }; + + sii9022a: hdmi-transmitter@3b { + compatible = "sil,sii9022"; + reg = <0x3b>; + iovcc-supply = <®_3p3v>; + cvcc12-supply = <®_1p2v>; + interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>; + #sound-dai-cells = <0>; + sil,i2s-data-lanes = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022a_in: endpoint {}; + }; + + port@1 { + reg = <1>; + + sii9022a_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + + stmpe811: touchscreen@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <®_3p3v>; + vio-supply = <®_3p3v>; + status = "okay"; + + stmpe_gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + /* GPIO 5-7 used for touch */ + st,norequest-mask = <0xf0>; + gpio-line-names = "GPIO_ADC_I2C1_1", + "GPIO_ADC_I2C1_2", + "GPIO_ADC_I2C1_3", + "GPIO_ADC_I2C1_4"; + }; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + status = "disabled"; + }; + }; + + pca9530: leds@60 { + compatible = "nxp,pca9530"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "PWM_0", "PWM_1"; + + gpio_pwm_0 { + label = "pca9530:pwm0"; + type = <PCA9532_TYPE_GPIO>; + }; + + gpio_pwm_1 { + label = "pca9530:pwm1"; + type = <PCA9532_TYPE_GPIO>; + }; + }; + +}; + +&i2c1 { + status = "okay"; +}; + +&lpuart0 { + status = "okay"; + linux,rs485-enabled-at-boot-time; +}; + +&mdio0 { + sgmii_phy03: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x03>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,dp83867-rxctrl-strap-quirk; + }; + + rgmii_phy04: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x04>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + rgmii_phy0c: ethernet-phy@c { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0c>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; +}; + +&pwm6 { + status = "okay"; +}; + +&pwm7 { + status = "okay"; +}; + +&sai1 { + status = "okay"; +}; + +&sata { + /delete-property/ dma-coherent; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb3 { + /* + * Although DR connector, VBUS is always driven, so + * restrict to host mode. + */ + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi new file mode 100644 index 0000000000000..1ab518c489252 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include "ls1021a.dtsi" + +/ { + model = "TQMLS102xA SOM"; + compatible = "tq,ls1021a-tqmls1021a", "fsl,ls1021a"; + + reg_3p3v_som: regulator-3p3v-som { + compatible = "regulator-fixed"; + regulator-name = "3P3V_SOM"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&esdhc { + compatible = "fsl,esdhc", "fsl,ls1021a-esdhc"; + /* e-MMC over 8 data lines */ + bus-width = <8>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + mc34vr500: pmic@8 { + reg = <0x08>; + status = "disabled"; + }; + + pmc0: pmc@11 { + reg = <0x11>; + status = "disabled"; + }; + + sa56004: temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <®_3p3v_som>; + }; + + adm1069: supervisor@4f { + reg = <0x4f>; + status = "disabled"; + }; + + rtc0: rtc@51 { + compatible = "nxp,pcf85063a"; + quartz-load-femtofarads = <12500>; + reg = <0x51>; + }; + + m24c64_54: eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + read-only; + vcc-supply = <®_3p3v_som>; + }; +}; + +&mdio0 { + tbi1: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; +}; + +&scfg { + reg = <0x0 0x1570000 0x0 0x0e00>; +}; + +&qspi { + status = "okay"; + + qflash0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <0>; + }; +}; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-19 14:42 UTC|newest] Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-01-19 14:42 [PATCH 0/9] TQMLS1021A support Alexander Stein 2023-01-19 14:42 ` Alexander Stein 2023-01-19 14:42 ` [PATCH 1/9] dt-bindings: arm: fsl: add TQ-Systems LS1021A board Alexander Stein 2023-01-19 14:42 ` Alexander Stein 2023-01-19 16:59 ` Krzysztof Kozlowski 2023-01-19 16:59 ` Krzysztof Kozlowski 2023-01-20 8:58 ` Alexander Stein 2023-01-20 8:58 ` Alexander Stein 2023-01-20 9:07 ` Krzysztof Kozlowski 2023-01-20 9:07 ` Krzysztof Kozlowski 2023-01-19 14:42 ` Alexander Stein [this message] 2023-01-19 14:42 ` [PATCH 2/9] ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree Alexander Stein 2023-01-19 17:03 ` Krzysztof Kozlowski 2023-01-19 17:03 ` Krzysztof Kozlowski 2023-01-20 10:08 ` Alexander Stein 2023-01-20 10:08 ` Alexander Stein 2023-01-20 10:21 ` Krzysztof Kozlowski 2023-01-20 10:21 ` Krzysztof Kozlowski 2023-01-19 14:42 ` [PATCH 3/9] ARM: dts: ls1021a: add TQMLS1021A flash partition layout Alexander Stein 2023-01-19 14:42 ` Alexander Stein 2023-01-19 14:42 ` [PATCH 4/9] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS TM070JVHG33 overlay Alexander Stein 2023-01-19 14:42 ` Alexander Stein 2023-01-19 14:42 ` [PATCH 5/9] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay Alexander Stein 2023-01-19 14:42 ` Alexander Stein 2023-01-19 14:42 ` [PATCH 6/9] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH DC44 overlay Alexander Stein 2023-01-19 14:42 ` Alexander Stein 2023-01-19 14:42 ` [PATCH 7/9] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH FC21 overlay Alexander Stein 2023-01-19 14:42 ` Alexander Stein 2023-01-19 14:42 ` [PATCH 8/9] ARM: multi_v7_defconfig: Add options to support TQMLS102xA series Alexander Stein 2023-01-19 14:42 ` Alexander Stein 2023-01-19 17:04 ` Krzysztof Kozlowski 2023-01-19 17:04 ` Krzysztof Kozlowski 2023-01-20 11:12 ` Alexander Stein 2023-01-20 11:12 ` Alexander Stein 2023-01-20 11:35 ` Krzysztof Kozlowski 2023-01-20 11:35 ` Krzysztof Kozlowski 2023-01-20 14:57 ` Russell King (Oracle) 2023-01-20 14:57 ` Russell King (Oracle) 2023-01-21 20:27 ` Krzysztof Kozlowski 2023-01-21 20:27 ` Krzysztof Kozlowski 2023-01-21 22:33 ` Russell King (Oracle) 2023-01-21 22:33 ` Russell King (Oracle) 2023-01-19 14:42 ` [PATCH 9/9] [DNI] ARM: multi_v7_defconfig: Enable CONFIG_ARM_LPAE for multi_v7_config Alexander Stein 2023-01-19 14:42 ` Alexander Stein 2023-01-19 15:09 ` Arnd Bergmann 2023-01-19 15:09 ` Arnd Bergmann 2023-01-19 15:27 ` Alexander Stein 2023-01-19 15:27 ` Alexander Stein 2023-01-19 16:07 ` Arnd Bergmann 2023-01-19 16:07 ` Arnd Bergmann 2023-01-20 12:43 ` Alexander Stein 2023-01-20 12:43 ` Alexander Stein 2023-01-20 14:00 ` Arnd Bergmann 2023-01-20 14:00 ` Arnd Bergmann 2023-01-24 10:30 ` Alexander Stein 2023-01-24 10:30 ` Alexander Stein 2023-01-24 11:37 ` Arnd Bergmann 2023-01-24 11:37 ` Arnd Bergmann 2023-01-19 16:00 ` Russell King (Oracle) 2023-01-19 16:00 ` Russell King (Oracle)
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230119144236.3541751-3-alexander.stein@ew.tq-group.com \ --to=alexander.stein@ew.tq-group.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux@armlinux.org.uk \ --cc=marcel.ziswiler@toradex.com \ --cc=marex@denx.de \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ --cc=soc@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.