* [PATCH 6.1 000/885] 6.1.16-rc1 review
@ 2023-03-07 16:48 Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 001/885] HID: asus: use spinlock to protect concurrent accesses Greg Kroah-Hartman
` (887 more replies)
0 siblings, 888 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:48 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, linux-kernel, torvalds, akpm, linux,
shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow
This is the start of the stable review cycle for the 6.1.16 release.
There are 885 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 09 Mar 2023 16:57:34 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.16-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux 6.1.16-rc1
Jani Nikula <jani.nikula@intel.com>
drm/edid: fix parsing of 3D modes from HDMI VSDB
Jani Nikula <jani.nikula@intel.com>
drm/edid: fix AVI infoframe aspect ratio handling
Noralf Trønnes <noralf@tronnes.org>
drm/gud: Fix UBSAN warning
John Harrison <John.C.Harrison@Intel.com>
drm/i915: Don't use BAR mappings for ring buffers with LLC
John Harrison <John.C.Harrison@Intel.com>
drm/i915: Don't use stolen memory for ring buffers with LLC
Mark Hawrylak <mark.hawrylak@gmail.com>
drm/radeon: Fix eDP for single-display iMac11,2
Mavroudis Chatzilaridis <mavchatz@protonmail.com>
drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nv
Mario Limonciello <mario.limonciello@amd.com>
drm/amd: Fix initialization for nbio 7.5.1
Steve Sistare <steven.sistare@oracle.com>
vfio/type1: restore locked_vm
Steve Sistare <steven.sistare@oracle.com>
vfio/type1: track locked_vm per dma
Steve Sistare <steven.sistare@oracle.com>
vfio/type1: prevent underflow of locked_vm via exec()
Steve Sistare <steven.sistare@oracle.com>
vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR
Jacob Pan <jacob.jun.pan@linux.intel.com>
iommu/vt-d: Fix PASID directory pointer coherency
Jacob Pan <jacob.jun.pan@linux.intel.com>
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
Manivannan Sadhasivam <mani@kernel.org>
bus: mhi: ep: Save channel state locally during suspend and resume
Manivannan Sadhasivam <mani@kernel.org>
bus: mhi: ep: Move chan->lock to the start of processing queued ch ring
Manivannan Sadhasivam <mani@kernel.org>
bus: mhi: ep: Only send -ENOTCONN status if client driver is available
Lukas Wunner <lukas@wunner.de>
PCI/DPC: Await readiness of secondary bus after reset
Damien Le Moal <damien.lemoal@opensource.wdc.com>
PCI: Avoid FLR for AMD FCH AHCI adapters
Lukas Wunner <lukas@wunner.de>
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
Lukas Wunner <lukas@wunner.de>
PCI: Unify delay handling for reset and resume
Lukas Wunner <lukas@wunner.de>
PCI/PM: Observe reset delay irrespective of bridge_d3
H. Nikolaus Schaller <hns@goldelico.com>
MIPS: DTS: CI20: fix otg power gpio
Guo Ren <guoren@kernel.org>
riscv: ftrace: Reduce the detour code size to half
Guo Ren <guoren@kernel.org>
riscv: ftrace: Remove wasted nops for !RISCV_ISA_C
Björn Töpel <bjorn@rivosinc.com>
riscv, mm: Perform BPF exhandler fixup on page fault
Andy Chiu <andy.chiu@sifive.com>
riscv: jump_label: Fixup unaligned arch_static_branch function
Sergey Matyukevich <sergey.matyukevich@syntacore.com>
riscv: mm: fix regression due to update_mmu_cache change
Mattias Nissler <mnissler@rivosinc.com>
riscv: Avoid enabling interrupts in die()
Conor Dooley <conor.dooley@microchip.com>
RISC-V: add a spin_shadow_stack declaration
Tomas Henzl <thenzl@redhat.com>
scsi: ses: Fix slab-out-of-bounds in ses_intf_remove()
Tomas Henzl <thenzl@redhat.com>
scsi: ses: Fix possible desc_ptr out-of-bounds accesses
Tomas Henzl <thenzl@redhat.com>
scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses
Tomas Henzl <thenzl@redhat.com>
scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process()
James Bottomley <jejb@linux.ibm.com>
scsi: ses: Don't attach if enclosure has no components
Saurav Kashyap <skashyap@marvell.com>
scsi: qla2xxx: Remove increment of interface err cnt
Quinn Tran <qutran@marvell.com>
scsi: qla2xxx: Fix erroneous link down
Quinn Tran <qutran@marvell.com>
scsi: qla2xxx: Remove unintended flag clearing
Arun Easi <aeasi@marvell.com>
scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests
Shreyas Deodhar <sdeodhar@marvell.com>
scsi: qla2xxx: Check if port is online before sending ELS
Quinn Tran <qutran@marvell.com>
scsi: qla2xxx: Fix link failure in NPIV environment
Bart Van Assche <bvanassche@acm.org>
scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
Kees Cook <keescook@chromium.org>
scsi: aacraid: Allocate cmd_priv with scsicmd
Vasant Hegde <vasant.hegde@amd.com>
iommu/amd: Improve page fault error reporting
Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter
Masami Hiramatsu (Google) <mhiramat@kernel.org>
tracing/eprobe: Fix to add filter on eprobe description in README file
Antonio Alvarez Feijoo <antonio.feijoo@suse.com>
tools/bootconfig: fix single & used for logical condition
Mukesh Ojha <quic_mojha@quicinc.com>
ring-buffer: Handle race between rb_move_tail and rb_check_pages
Tong Tiangen <tongtiangen@huawei.com>
memory tier: release the new_memtier in find_create_memory_tier()
Steven Rostedt <rostedt@goodmis.org>
ktest.pl: Add RUN_TIMEOUT option with default unlimited
Steven Rostedt <rostedt@goodmis.org>
ktest.pl: Fix missing "end_monitor" when machine check fails
Masami Hiramatsu (Google) <mhiramat@kernel.org>
kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list
Steven Rostedt <rostedt@goodmis.org>
ktest.pl: Give back console on Ctrt^C on monitor
Yin Fengwei <fengwei.yin@intel.com>
mm/thp: check and bail out if page in deferred queue already
Johannes Weiner <hannes@cmpxchg.org>
mm: memcontrol: deprecate charge moving
John Ogness <john.ogness@linutronix.de>
docs: gdbmacros: print newest record
Chen-Yu Tsai <wenst@chromium.org>
remoteproc/mtk_scp: Move clk ops outside send_lock
Sakari Ailus <sakari.ailus@linux.intel.com>
media: ipu3-cio2: Fix PM runtime usage_count in driver unbind
Elvira Khabirova <lineprinter0@gmail.com>
mips: fix syscall_get_nr
Dan Williams <dan.j.williams@intel.com>
dax/kmem: Fix leak of memory-hotplug resources
Al Viro <viro@zeniv.linux.org.uk>
alpha: fix FEN fault handling
Naoya Horiguchi <naoya.horiguchi@nec.com>
mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON
Guilherme G. Piccoli <gpiccoli@igalia.com>
panic: fix the panic_print NMI backtrace setting
Matthias Kaehlcke <mka@chromium.org>
regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
Xiubo Li <xiubli@redhat.com>
ceph: update the time stamps and try to drop the suid/sgid
Ilya Dryomov <idryomov@gmail.com>
rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
fuse: add inode/permission checks to fileattr_get/fileattr_set
Catalin Marinas <catalin.marinas@arm.com>
arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ARM: dts: exynos: correct TMU phandle in Odroid HC1
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ARM: dts: exynos: correct TMU phandle in Odroid XU
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ARM: dts: exynos: correct TMU phandle in Exynos5250
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ARM: dts: exynos: correct TMU phandle in Exynos4
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ARM: dts: exynos: correct TMU phandle in Exynos4210
Manivannan Sadhasivam <mani@kernel.org>
ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node
Manivannan Sadhasivam <mani@kernel.org>
ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node
Zev Weiss <zev@bewilderbeest.net>
hwmon: (nct6775) Fix incorrect parenthesization in nct6775_write_fan_div()
Zev Weiss <zev@bewilderbeest.net>
hwmon: (peci/cputemp) Fix off-by-one in coretemp_label allocation
Mikulas Patocka <mpatocka@redhat.com>
dm flakey: fix a bug with 32-bit highmem systems
Mikulas Patocka <mpatocka@redhat.com>
dm flakey: don't corrupt the zero page
Joe Thornber <ejt@redhat.com>
dm cache: free background tracker's queued work in btracker_destroy
Mikulas Patocka <mpatocka@redhat.com>
dm flakey: fix logic when corrupting a bio
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
thermal: intel: powerclamp: Fix cur_state for multi package system
Manish Chopra <manishc@marvell.com>
qede: fix interrupt coalescing configuration
Arnd Bergmann <arnd@arndb.de>
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
Marc Bornand <dev.mbornand@systemb.ch>
wifi: cfg80211: Set SSID if it is not already set
Alexander Wetzel <alexander@wetzel-home.de>
wifi: cfg80211: Fix use after free for wext
Len Brown <len.brown@intel.com>
wifi: ath11k: allow system suspend to survive ath11k
Bitterblue Smith <rtl8821cerfe2@gmail.com>
wifi: rtl8xxxu: Use a longer retry limit of 48
Ping-Ke Shih <pkshih@realtek.com>
wifi: rtw88: use RTW_FLAG_POWERON flag to prevent to power on/off twice
Mike Snitzer <snitzer@kernel.org>
dm: add cond_resched() to dm_wq_requeue_work()
Pingfan Liu <piliu@redhat.com>
dm: add cond_resched() to dm_wq_work()
Mikulas Patocka <mpatocka@redhat.com>
dm: send just one event on resize, not two
Louis Rannou <lrannou@baylibre.com>
mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type
Tudor Ambarus <tudor.ambarus@linaro.org>
mtd: spi-nor: spansion: Consider reserved bits in CFR5 register
Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
mtd: spi-nor: sfdp: Fix index value for SCCR dwords
Dan Williams <dan.j.williams@intel.com>
cxl/pmem: Fix nvdimm registration races
Jan Kara <jack@suse.cz>
ext4: Fix possible corruption when moving a directory
Jun Nie <jun.nie@linaro.org>
ext4: refuse to create ea block when umounted
Jun Nie <jun.nie@linaro.org>
ext4: optimize ea_inode block expansion
Zhihao Cheng <chengzhihao1@huawei.com>
jbd2: fix data missing when reusing bh which is ready to be checkpointed
Łukasz Stelmach <l.stelmach@samsung.com>
ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC
Dmitry Fomin <fomindmitriyfoma@mail.ru>
ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls()
andrew.yang <andrew.yang@mediatek.com>
mm/damon/paddr: fix missing folio_put()
Giovanni Cabiddu <giovanni.cabiddu@intel.com>
crypto: qat - fix out-of-bounds read
Marc Zyngier <maz@kernel.org>
irqdomain: Fix domain registration race
Johan Hovold <johan+linaro@kernel.org>
irqdomain: Fix mapping-creation race
Johan Hovold <johan+linaro@kernel.org>
irqdomain: Refactor __irq_domain_alloc_irqs()
Johan Hovold <johan+linaro@kernel.org>
irqdomain: Drop bogus fwspec-mapping error handling
Johan Hovold <johan+linaro@kernel.org>
irqdomain: Look for existing mapping only once
Johan Hovold <johan+linaro@kernel.org>
irqdomain: Fix disassociation race
Johan Hovold <johan+linaro@kernel.org>
irqdomain: Fix association race
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: seccomp: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: vm: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: dmabuf-heaps: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: drivers: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: futex: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: ipc: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: perf_events: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: mount_setattr: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: move_mount_set_group: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: rseq: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: sync: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: ptp: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: user_events: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: filesystems: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: gpio: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: media_tests: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: kcmp: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: membarrier: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: pidfd: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: clone3: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: arm64: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: pid_namespace: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: core: Fix incorrect kernel headers search path
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: sched: Fix incorrect kernel headers search path
Masami Hiramatsu (Google) <mhiramat@kernel.org>
selftests/ftrace: Fix eprobe syntax test case to check filter support
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests/powerpc: Fix incorrect kernel headers search path
Pali Rohár <pali@kernel.org>
powerpc/boot: Don't always pass -mcpu=powerpc when building 32-bit uImage
Roberto Sassu <roberto.sassu@huawei.com>
ima: Align ima_file_mmap() parameters with mmap_file LSM hook
Matt Bobrowski <mattbobrowski@google.com>
ima: fix error handling logic when file measurement failed
Jens Axboe <axboe@kernel.dk>
brd: check for REQ_NOWAIT and set correct page allocation mask
Jens Axboe <axboe@kernel.dk>
brd: return 0/-error from brd_insert_page()
Jens Axboe <axboe@kernel.dk>
brd: mark as nowait compatible
Tom Lendacky <thomas.lendacky@amd.com>
virt/sev-guest: Return -EIO if certificate buffer is not large enough
KP Singh <kpsingh@kernel.org>
Documentation/hw-vuln: Document the interaction between IBRS and STIBP
KP Singh <kpsingh@kernel.org>
x86/speculation: Allow enabling STIBP with legacy IBRS
Borislav Petkov (AMD) <bp@alien8.de>
x86/microcode/AMD: Fix mixed steppings support
Borislav Petkov (AMD) <bp@alien8.de>
x86/microcode/AMD: Add a @cpu parameter to the reloading functions
Borislav Petkov (AMD) <bp@alien8.de>
x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter
Yang Jihong <yangjihong1@huawei.com>
x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range
Yang Jihong <yangjihong1@huawei.com>
x86/kprobes: Fix __recover_optprobed_insn check optimizing logic
Sean Christopherson <seanjc@google.com>
x86/reboot: Disable SVM, not just VMX, when stopping CPUs
Sean Christopherson <seanjc@google.com>
x86/reboot: Disable virtualization in an emergency if SVM is supported
Sean Christopherson <seanjc@google.com>
x86/crash: Disable virt in core NMI crash handler to avoid double shootdown
Sean Christopherson <seanjc@google.com>
x86/virt: Force GIF=1 prior to disabling SVM (for reboot flows)
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
selftests: x86: Fix incorrect kernel headers search path
Randy Dunlap <rdunlap@infradead.org>
KVM: SVM: hyper-v: placate modpost section mismatch error
Peter Gonda <pgonda@google.com>
KVM: SVM: Fix potential overflow in SEV's send|receive_update_data()
Sean Christopherson <seanjc@google.com>
KVM: x86: Inject #GP on x2APIC WRMSR that sets reserved bits 63:32
Sean Christopherson <seanjc@google.com>
KVM: x86: Inject #GP if WRMSR sets reserved bits in APIC Self-IPI
Sean Christopherson <seanjc@google.com>
KVM: SVM: Don't put/load AVIC when setting virtual APIC mode
Sean Christopherson <seanjc@google.com>
KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target
Sean Christopherson <seanjc@google.com>
KVM: SVM: Flush the "current" TLB when activating AVIC
Sean Christopherson <seanjc@google.com>
KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID
Sean Christopherson <seanjc@google.com>
KVM: x86: Don't inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled
Sean Christopherson <seanjc@google.com>
KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps
Sean Christopherson <seanjc@google.com>
KVM: x86: Purge "highest ISR" cache when updating APICv state
Sean Christopherson <seanjc@google.com>
KVM: Register /dev/kvm as the _very_ last thing during initialization
Alexandru Matei <alexandru.matei@uipath.com>
KVM: VMX: Fix crash due to uninitialized current_vmcs
Sean Christopherson <seanjc@google.com>
KVM: Destroy target device if coalesced MMIO unregistration fails
Bernard Metzler <bmt@zurich.ibm.com>
RDMA/siw: Fix user page pinning accounting
Hou Tao <houtao1@huawei.com>
md: don't update recovery_cp when curr_resync is ACTIVE
Jan Kara <jack@suse.cz>
udf: Fix file corruption when appending just after end of preallocated extent
Jan Kara <jack@suse.cz>
udf: Detect system inodes linked into directory hierarchy
Jan Kara <jack@suse.cz>
udf: Preserve link count of system files
Jan Kara <jack@suse.cz>
udf: Do not update file length for failed writes to inline files
Jan Kara <jack@suse.cz>
udf: Do not bother merging very long extents
Jan Kara <jack@suse.cz>
udf: Truncate added extents on failed expansion
Jeff Xu <jeffxu@google.com>
selftests/landlock: Test ptrace as much as possible with Yama
Jeff Xu <jeffxu@google.com>
selftests/landlock: Skip overlayfs tests when not supported
Andrew Morton <akpm@linux-foundation.org>
fs/cramfs/inode.c: initialize file_ra_state
Heming Zhao via Ocfs2-devel <ocfs2-devel@oss.oracle.com>
ocfs2: fix non-auto defrag path not working issue
Heming Zhao via Ocfs2-devel <ocfs2-devel@oss.oracle.com>
ocfs2: fix defrag path triggering jbd2 ASSERT
Jaegeuk Kim <jaegeuk@kernel.org>
f2fs: fix kernel crash due to null io->bio
Eric Biggers <ebiggers@google.com>
f2fs: fix cgroup writeback accounting with fs-layer encryption
Jaegeuk Kim <jaegeuk@kernel.org>
f2fs: retry to update the inode page given data corruption
Eric Biggers <ebiggers@google.com>
f2fs: fix information leak in f2fs_move_inline_dirents()
Alexander Aring <aahringo@redhat.com>
fs: dlm: send FIN ack back in right cases
Alexander Aring <aahringo@redhat.com>
fs: dlm: move sending fin message into state change handling
Alexander Aring <aahringo@redhat.com>
fs: dlm: don't set stop rx flag after node reset
Yuezhang Mo <Yuezhang.Mo@sony.com>
exfat: fix inode->i_blocks for non-512 byte sector size device
Sungjong Seo <sj1557.seo@samsung.com>
exfat: redefine DIR_DELETED as the bad cluster number
Yuezhang Mo <Yuezhang.Mo@sony.com>
exfat: fix unexpected EOF while reading dir
Yuezhang Mo <Yuezhang.Mo@sony.com>
exfat: fix reporting fs error when reading dir beyond EOF
Dongliang Mu <mudongliangabcd@gmail.com>
fs: hfsplus: fix UAF issue in hfsplus_put_super
Liu Shixin <liushixin2@huawei.com>
hfs: fix missing hfs_bnode_get() in __hfs_bnode_create
Jens Axboe <axboe@kernel.dk>
io_uring: mark task TASK_RUNNING before handling resume/task work
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ARM: dts: exynos: correct HDMI phy compatible in Exynos4
Joel Fernandes (Google) <joel@joelfernandes.org>
torture: Fix hang during kthread shutdown phase
Hangyu Hua <hbh25y@gmail.com>
ksmbd: fix possible memory leak in smb2_lock()
Namjae Jeon <linkinjeon@kernel.org>
ksmbd: do not allow the actual frame length to be smaller than the rfc1002 length
Namjae Jeon <linkinjeon@kernel.org>
ksmbd: fix wrong data area length for smb2 lock request
Waiman Long <longman@redhat.com>
locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath
Boris Burkov <boris@bur.io>
btrfs: hold block group refcount during async discard
Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
Ronnie Sahlberg <lsahlber@redhat.com>
cifs: return a single-use cfid if we did not get a lease
Ronnie Sahlberg <lsahlber@redhat.com>
cifs: Check the lease context if we actually got a lease
Stefan Metzmacher <metze@samba.org>
cifs: don't try to use rdma offload on encrypted connections
Stefan Metzmacher <metze@samba.org>
cifs: split out smb3_use_rdma_offload() helper
Stefan Metzmacher <metze@samba.org>
cifs: introduce cifs_io_parms in smb2_async_writev()
Paulo Alcantara <pc@manguebit.com>
cifs: fix mount on old smb servers
Volker Lendecke <vl@samba.org>
cifs: Fix uninitialized memory reads for oparms.mode
Volker Lendecke <vl@samba.org>
cifs: Fix uninitialized memory read in smb3_qfs_tcon()
Nico Boehr <nrb@linux.ibm.com>
KVM: s390: disable migration mode when dirty tracking is disabled
Vasily Gorbik <gor@linux.ibm.com>
s390/kprobes: fix current_kprobe never cleared after kprobes reenter
Vasily Gorbik <gor@linux.ibm.com>
s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler
Ilya Leoshkevich <iii@linux.ibm.com>
s390: discard .interp section
Gerald Schaefer <gerald.schaefer@linux.ibm.com>
s390/extmem: return correct segment type in __segment_load()
Joseph Qi <joseph.qi@linux.alibaba.com>
io_uring: fix fget leak when fs don't support nowait buffered read
David Lamparter <equinox@diac24.net>
io_uring: remove MSG_NOSIGNAL from recvmsg
Pavel Begunkov <asml.silence@gmail.com>
io_uring/rsrc: disallow multi-source reg buffers
Jens Axboe <axboe@kernel.dk>
io_uring: add reschedule point to handle_tw_list()
Jens Axboe <axboe@kernel.dk>
io_uring: add a conditional reschedule to the IOPOLL cancelation loop
Jens Axboe <axboe@kernel.dk>
io_uring: handle TIF_NOTIFY_RESUME when checking for task_work
Pavel Begunkov <asml.silence@gmail.com>
io_uring: use user visible tail in io_uring_poll()
Kees Cook <keescook@chromium.org>
io_uring: Replace 0-length array with flexible array
Corey Minyard <cminyard@mvista.com>
ipmi_ssif: Rename idle state and check
Corey Minyard <cminyard@mvista.com>
ipmi:ssif: resend_msg() cannot fail
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
ipmi: ipmb: Fix the MODULE_PARM_DESC associated to 'retry_time_ms'
Johan Hovold <johan+linaro@kernel.org>
rtc: pm8xxx: fix set-alarm race
Jens Axboe <axboe@kernel.dk>
block: be a bit more careful in checking for NULL bdev while polling
Jens Axboe <axboe@kernel.dk>
block: clear bio->bi_bdev when putting a bio back in the cache
Jens Axboe <axboe@kernel.dk>
block: don't allow multiple bios for IOCB_NOWAIT issue
Alper Nebi Yasak <alpernebiyasak@gmail.com>
firmware: coreboot: framebuffer: Ignore reserved pixel color bits
Sreekanth Reddy <sreekanth.reddy@broadcom.com>
scsi: mpt3sas: Remove usage of dma_get_required_mask() API
Jun ASAKA <JunASAKA@zzy040330.moe>
wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu
Saravana Kannan <saravanak@google.com>
driver core: fw_devlink: Avoid spurious error message
Asahi Lina <lina@asahilina.net>
drm/shmem-helper: Revert accidental non-GPL export
Paulo Alcantara <pc@cjr.nz>
cifs: prevent data race in smb2_reconnect()
Jeff Layton <jlayton@kernel.org>
nfsd: don't hand out delegation on setuid files being opened for write
Jeff Layton <jlayton@kernel.org>
nfsd: zero out pointers after putting nfsd_files on COPY setup error
Mike Snitzer <snitzer@kernel.org>
dm cache: add cond_resched() to various workqueue loops
Mike Snitzer <snitzer@kernel.org>
dm thin: add cond_resched() to various workqueue loops
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
drm/amd/display: Disable HUBP/DPP PG on DCN314 for now
Darrell Kavanagh <darrell.kavanagh@gmail.com>
drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
drm/amd/display: Enable P-state validation checks for DCN314
Bastien Nocera <hadess@hadess.net>
HID: logitech-hidpp: Don't restart communication if not necessary
Mason Zhang <Mason.Zhang@mediatek.com>
scsi: ufs: core: Fix device management cmd timeout flow
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: snic: Fix memory leak with using debugfs_lookup()
Wesley Chalmers <Wesley.Chalmers@amd.com>
drm/amd/display: Do not commit pipe when updating DRR
Claudiu Beznea <claudiu.beznea@microchip.com>
pinctrl: at91: use devm_kasprintf() to avoid potential leaks
Denis Pauk <pauk.denis@gmail.com>
hwmon: (nct6775) B650/B660/X670 ASUS boards support
Denis Pauk <pauk.denis@gmail.com>
hwmon: (nct6775) Directly call ASUS ACPI WMI method
Robin Murphy <robin.murphy@arm.com>
hwmon: (coretemp) Simplify platform device handling
Andreas Gruenbacher <agruenba@redhat.com>
gfs2: Improve gfs2_make_fs_rw error handling
Vladimir Stempen <vladimir.stempen@amd.com>
drm/amd/display: fix FCLK pstate change underflow
Vitaly Prosyak <vitaly.prosyak@amd.com>
Revert "drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is uninstalled"
Kees Cook <keescook@chromium.org>
regulator: s5m8767: Bounds check id indexing into arrays
Kees Cook <keescook@chromium.org>
regulator: max77802: Bounds check regulator id against opmode
Kees Cook <keescook@chromium.org>
ASoC: kirkwood: Iterate over array indexes instead of using pointer math
강신형 <s47.kang@samsung.com>
ASoC: soc-compress: Reposition and add pcm_mutex
Marijn Suijten <marijn.suijten@somainline.org>
drm/msm/dpu: Add DSC hardware blocks to register snapshot
Jakob Koschel <jkl820.git@gmail.com>
docs/scripts/gdb: add necessary make scripts_gdb step
farah kassabri <fkassabri@habana.ai>
habanalabs: fix bug in timestamps registration code
Moti Haimovski <mhaimovski@habana.ai>
habanalabs: extend fatal messages to contain PCI info
Roman Li <roman.li@amd.com>
drm/amd/display: Set hvm_enabled flag for S/G mode
Wayne Lin <Wayne.Lin@amd.com>
drm/drm_print: correct format problem
Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
drm: rcar-du: Fix setting a reserved bit in DPLLCR
Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
drm: rcar-du: Add quirk for H3 ES1.x pclk workaround
Jiasheng Jiang <jiasheng@iscas.ac.cn>
drm/msm/dsi: Add missing check for alloc_ordered_workqueue
José Expósito <jose.exposito89@gmail.com>
HID: uclogic: Add support for XP-PEN Deco Pro MW
José Expósito <jose.exposito89@gmail.com>
HID: uclogic: Add support for XP-PEN Deco Pro SW
José Expósito <jose.exposito89@gmail.com>
HID: uclogic: Add battery quirk
José Expósito <jose.exposito89@gmail.com>
HID: uclogic: Add frame type quirk
Brandon Syu <Brandon.Syu@amd.com>
drm/amd/display: fix mapping to non-allocated address
Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
drm: amd: display: Fix memory leakage
Mario Limonciello <mario.limonciello@amd.com>
drm/amd: Avoid ASSERT for some message failures
Thomas Zimmermann <tzimmermann@suse.de>
Revert "fbcon: don't lose the console font across generic->chip driver switch"
Justin Tee <justin.tee@broadcom.com>
scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write
Philip Yang <Philip.Yang@amd.com>
drm/amdkfd: Page aligned memory reserve size
Mario Limonciello <mario.limonciello@amd.com>
drm/amd: Avoid BUG() for case of SRIOV missing IP version
Liwei Song <liwei.song@windriver.com>
drm/radeon: free iio for atombios when driver shutdown
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
drm/amd/display: Defer DIG FIFO disable after VID stream enable
Carlo Caione <ccaione@baylibre.com>
drm/tiny: ili9486: Do not assume 8-bit only SPI controllers
Jingyuan Liang <jingyliang@chromium.org>
HID: Add Mapping for System Microphone Mute
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
drm/omap: dsi: Fix excessive stack usage
Roman Li <roman.li@amd.com>
drm/amd/display: Fix potential null-deref in dm_resume
Ian Chen <ian.chen@amd.com>
drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write
Dillon Varone <Dillon.Varone@amd.com>
drm/amd/display: Reduce expected sdp bandwidth for dcn321
Allen Ballway <ballway@chromium.org>
drm: panel-orientation-quirks: Add quirk for DynaBook K50
Hans de Goede <hdegoede@redhat.com>
drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Tab 3 X90F
Eric Dumazet <edumazet@google.com>
scm: add user copy checks to put_cmsg()
Moshe Shemesh <moshe@nvidia.com>
devlink: Fix TP_STRUCT_entry in trace of devlink health report
Heiko Carstens <hca@linux.ibm.com>
s390/kfence: fix page fault reporting
Michael Kelley <mikelley@microsoft.com>
hv_netvsc: Check status in SEND_RNDIS_PKT completion message
Zong-Zhe Yang <kevin_yang@realtek.com>
wifi: rtw89: debug: avoid invalid access on RTW89_DBG_SEL_MAC_30
Moises Cardona <moisesmcardona@gmail.com>
Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE
Mario Limonciello <mario.limonciello@amd.com>
Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921
Marcel Holtmann <marcel@holtmann.org>
Bluetooth: Fix issue with Actions Semi ATS2851 based devices
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM: EM: fix memory leak with using debugfs_lookup()
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM: domains: fix memory leak with using debugfs_lookup()
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
time/debug: Fix memory leak with using debugfs_lookup()
Heiko Carstens <hca@linux.ibm.com>
s390/idle: mark arch_cpu_idle() noinstr
Kees Cook <keescook@chromium.org>
uaccess: Add minimum bounds check on kernel buffer size
Kees Cook <keescook@chromium.org>
coda: Avoid partial allocation of sig_inputArgs
Shay Drory <shayd@nvidia.com>
net/mlx5: fw_tracer: Fix debug print
Hans de Goede <hdegoede@redhat.com>
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
Lorenzo Bianconi <lorenzo@kernel.org>
wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup
Zhang Rui <rui.zhang@intel.com>
tools/power/x86/intel-speed-select: Add Emerald Rapid quirk
Sam James <sam@gentoo.org>
gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
Oliver Hartkopp <socketcan@hartkopp.net>
can: isotp: check CAN address family in isotp_bind()
Alok Tiwari <alok.a.tiwari@oracle.com>
netfilter: nf_tables: NULL pointer dereference in nf_tables_updobj()
Vasily Gorbik <gor@linux.ibm.com>
s390/mm,ptdump: avoid Kasan vs Memcpy Real markers swapping
Michael Schmitz <schmitzmic@gmail.com>
m68k: Check syscall_trace_enter() return code
Florian Fainelli <f.fainelli@gmail.com>
net: bcmgenet: Add a check for oversized packets
Kees Cook <keescook@chromium.org>
crypto: hisilicon: Wipe entire pool on error
Feng Tang <feng.tang@intel.com>
clocksource: Suspend the watchdog temporarily when high read latency detected
Tim Zimmermann <tim@linux4.de>
thermal: intel: intel_pch: Add support for Wellsburg PCH
Dave Thaler <dthaler@microsoft.com>
bpf, docs: Fix modulo zero, division by zero, overflow, and underflow
Mark Rutland <mark.rutland@arm.com>
ACPI: Don't build ACPICA with '-Os'
Jesse Brandeburg <jesse.brandeburg@intel.com>
ice: add missing checks for PF vsi type
Siddaraju DH <siddaraju.dh@intel.com>
ice: restrict PTP HW clock freq adjustments to 100, 000, 000 PPB
Pietro Borrello <borrello@diag.uniroma1.it>
inet: fix fast path in __inet_hash_connect()
Jisoo Jang <jisoo.jang@yonsei.ac.kr>
wifi: mt7601u: fix an integer underflow
Jisoo Jang <jisoo.jang@yonsei.ac.kr>
wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds
Holger Hoffstätte <holger@applied-asynchrony.com>
bpftool: Always disable stack protection for BPF objects
Breno Leitao <leitao@debian.org>
x86/bugs: Reset speculation control settings on init
Jann Horn <jannh@google.com>
timers: Prevent union confusion from unexpected restart_syscall()
Yang Li <yang.lee@linux.alibaba.com>
thermal: intel: Fix unsigned comparison with less than zero
Kalle Valo <quic_kvalo@quicinc.com>
wifi: ath11k: debugfs: fix to work with multiple PCI devices
Zqiang <qiang1.zhang@intel.com>
rcu-tasks: Handle queue-shrink/callback-enqueue race condition
Zqiang <qiang1.zhang@intel.com>
rcu-tasks: Make rude RCU-Tasks work well with CPU hotplug
Pingfan Liu <kernelfans@gmail.com>
srcu: Delegate work to the boot cpu if using SRCU_SIZE_SMALL
Paul E. McKenney <paulmck@kernel.org>
rcu: Suppress smp_processor_id() complaint in synchronize_rcu_expedited_wait()
Paul E. McKenney <paulmck@kernel.org>
rcu: Make RCU_LOCKDEP_WARN() avoid early lockdep checks
Jisoo Jang <jisoo.jang@yonsei.ac.kr>
wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds()
Nagarajan Maran <quic_nmaran@quicinc.com>
wifi: ath11k: fix monitor mode bringup crash
Minsuk Kang <linuxlovemin@yonsei.ac.kr>
wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect()
Kan Liang <kan.liang@linux.intel.com>
perf/x86/intel/uncore: Add Meteor Lake support
Peter Zijlstra <peterz@infradead.org>
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
Mark Rutland <mark.rutland@arm.com>
cpuidle: drivers: firmware: psci: Dont instrument suspend code
Jens Axboe <axboe@kernel.dk>
x86/fpu: Don't set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads
Peter Zijlstra <peterz@infradead.org>
cpuidle, intel_idle: Fix CPUIDLE_FLAG_INIT_XSTATE
Michael Grzeschik <m.grzeschik@pengutronix.de>
arm64: zynqmp: Enable hs termination flag for USB dwc3 controller
Qu Wenruo <wqu@suse.com>
btrfs: scrub: improve tree block error reporting
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
trace/blktrace: fix memory leak with using debugfs_lookup()
Yu Kuai <yukuai3@huawei.com>
blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()
Yu Kuai <yukuai3@huawei.com>
blk-cgroup: dropping parent refcount after pd_free_fn() is done
Li Nan <linan122@huawei.com>
blk-iocost: fix divide by 0 error in calc_lcoefs()
Jann Horn <jannh@google.com>
fs: Use CHECK_DATA_CORRUPTION() when kernel bugs are detected
Markuss Broks <markuss.broks@gmail.com>
ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
Nicholas Piggin <npiggin@gmail.com>
exit: Detect and fix irq disabled state in oops
Peter Zijlstra <peterz@infradead.org>
context_tracking: Fix noinstr vs KASAN
Jan Kara <jack@suse.cz>
udf: Define EFSCORRUPTED error code
Konrad Dybcio <konrad.dybcio@linaro.org>
arm64: dts: qcom: msm8996: Add additional A2NoC clocks
Liang He <windhl@126.com>
ARM: OMAP2+: omap4-common: Fix refcount leak bug
Bjorn Andersson <quic_bjorande@quicinc.com>
rpmsg: glink: Release driver_override
Bjorn Andersson <quic_bjorande@quicinc.com>
rpmsg: glink: Avoid infinite loop on intent for missing channel
Tasos Sahanidis <tasos@tasossah.com>
media: saa7134: Use video_unregister_device for radio_dev
Duoming Zhou <duoming@zju.edu.cn>
media: usb: siano: Fix use after free bugs caused by do_submit_urb
Hans Verkuil <hverkuil-cisco@xs4all.nl>
media: i2c: ov7670: 0 instead of -EINVAL was returned
Hans de Goede <hdegoede@redhat.com>
media: atomisp: Only set default_run_mode on first open of a stream/asd
Duoming Zhou <duoming@zju.edu.cn>
media: rc: Fix use-after-free bugs caused by ene_tx_irqsim()
Dong Chuanjian <chuanjian@nfschina.com>
media: drivers/media/v4l2-core/v4l2-h264 : add detection of null pointers
Ming Qian <ming.qian@nxp.com>
media: amphion: correct the unspecified color space
Ming Qian <ming.qian@nxp.com>
media: imx-jpeg: Apply clk_bulk api instead of operating specific clk
Nicolas Dufresne <nicolas.dufresne@collabora.com>
media: hantro: Fix JPEG encoder ENUM_FRMSIZE on RK3399
Ming Qian <ming.qian@nxp.com>
media: v4l2-jpeg: ignore the unknown APP14 marker
Ming Qian <ming.qian@nxp.com>
media: v4l2-jpeg: correct the skip count in jpeg_parse_app14_data
Arnd Bergmann <arnd@arndb.de>
media: platform: mtk-mdp3: fix Kconfig dependencies
Moudy Ho <moudy.ho@mediatek.com>
media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config
Arnd Bergmann <arnd@arndb.de>
media: camss: csiphy-3ph: avoid undefined behavior
Qiheng Lin <linqiheng@huawei.com>
media: platform: mtk-mdp3: Fix return value check in mdp_probe()
Jai Luthra <j-luthra@ti.com>
media: i2c: imx219: Fix binning for RAW8 capture
Adam Ford <aford173@gmail.com>
media: i2c: imx219: Split common registers from mode tables
Yuan Can <yuancan@huawei.com>
media: i2c: ov772x: Fix memleak in ov772x_probe()
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
media: mc: Get media_device directly from pad
Jai Luthra <j-luthra@ti.com>
media: ov5640: Handle delays when no reset_gpio set
Jai Luthra <j-luthra@ti.com>
media: ov5640: Fix soft reset sequence and timings
Shang XiaoJing <shangxiaojing@huawei.com>
media: ov5675: Fix memleak in ov5675_init_controls()
Shang XiaoJing <shangxiaojing@huawei.com>
media: ov2740: Fix memleak in ov2740_init_controls()
Shang XiaoJing <shangxiaojing@huawei.com>
media: max9286: Fix memleak in max9286_v4l2_register()
Bastian Germann <bage@linutronix.de>
builddeb: clean generated package content
Nathan Chancellor <nathan@kernel.org>
s390/vdso: Drop '-shared' from KBUILD_CFLAGS_64
Nathan Chancellor <nathan@kernel.org>
powerpc: Remove linker flag from KBUILD_AFLAGS
Yang Yingliang <yangyingliang@huawei.com>
media: imx: imx7-media-csi: fix missing clk_disable_unprepare() in imx7_csi_init()
Jiasheng Jiang <jiasheng@iscas.ac.cn>
media: platform: ti: Add missing check for devm_regulator_get
Gaosheng Cui <cuigaosheng1@huawei.com>
media: ti: cal: fix possible memory leak in cal_ctx_create()
Sibi Sankar <quic_sibis@quicinc.com>
remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
Christoph Hellwig <hch@lst.de>
Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors
Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
IB/hfi1: Fix math bugs in hfi1_can_pin_pages()
Bob Pearson <rpearsonhpe@gmail.com>
RDMA/rxe: Fix missing memory barriers in rxe_queue.h
Yunsheng Lin <linyunsheng@huawei.com>
RDMA/rxe: cleanup some error handling in rxe_verbs.c
Tina Zhang <tina.zhang@intel.com>
iommu/vt-d: Allow to use flush-queue when first level is default
Lu Baolu <baolu.lu@linux.intel.com>
iommu/vt-d: Fix error handling in sva enable/disable paths
Eric Pilmore <epilmore@gigaio.com>
dmaengine: ptdma: check for null desc before calling pt_cmd_callback
Kees Cook <keescook@chromium.org>
dmaengine: dw-axi-dmac: Do not dereference NULL structure
Shravan Chippa <shravan.chippa@microchip.com>
dmaengine: sf-pdma: pdma_desc memory leak fix
Vasant Hegde <vasant.hegde@amd.com>
iommu/amd: Do not identity map v2 capable device when snp is enabled
Jason Gunthorpe <jgg@ziepe.ca>
iommu: Fix error unwind in iommu_group_alloc()
Dan Carpenter <error27@gmail.com>
iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry()
Johan Hovold <johan+linaro@kernel.org>
PCI: qcom: Fix host-init error handling
Neill Kapron <nkapron@google.com>
phy: rockchip-typec: fix tcphy_get_mode error case
Geert Uytterhoeven <geert+renesas@glider.be>
PCI: Fix dropping valid root bus resources with .end = zero
Serge Semin <Sergey.Semin@baikalelectronics.ru>
dmaengine: dw-edma: Fix readq_ch() return value truncation
Alexander Stein <alexander.stein@ew.tq-group.com>
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
Saravana Kannan <saravanak@google.com>
mtd: mtdpart: Don't create platform device that'll never probe
Saravana Kannan <saravanak@google.com>
driver core: fw_devlink: Make cycle detection more robust
Saravana Kannan <saravanak@google.com>
driver core: fw_devlink: Improve check for fwnode with no device/driver
Saravana Kannan <saravanak@google.com>
driver core: fw_devlink: Consolidate device link flag computation
Saravana Kannan <saravanak@google.com>
driver core: fw_devlink: Allow marking a fwnode link as being part of a cycle
Saravana Kannan <saravanak@google.com>
driver core: fw_devlink: Don't purge child fwnode's consumer links
Saravana Kannan <saravanak@google.com>
driver core: fw_devlink: Add DL_FLAG_CYCLE support to device links
Peng Fan <peng.fan@nxp.com>
tty: serial: imx: disable Ageing Timer interrupt request irq
Marek Vasut <marex@denx.de>
tty: serial: imx: Handle RS485 DE signal active high
Shenwei Wang <shenwei.wang@nxp.com>
serial: fsl_lpuart: fix RS485 RTS polariy inverse issue
Mustafa Ismail <mustafa.ismail@intel.com>
RDMA/irdma: Cap MSIX used to online CPUs + 1
Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
usb: max-3421: Fix setting of I/O pins
Nikita Zhandarovich <n.zhandarovich@fintech.ru>
RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()
Andreas Kemnade <andreas@kemnade.info>
power: supply: remove faulty cooling logic
Lu Baolu <baolu.lu@linux.intel.com>
iommu/vt-d: Set No Execute Enable bit in PASID table entry
Sven Peter <sven@svenpeter.dev>
iommu/dart: Fix apple_dart_device_group for PCI groups
Hector Martin <marcan@marcan.st>
iommu: dart: Support >64 stream IDs
Hector Martin <marcan@marcan.st>
iommu: dart: Add suspend/resume support
Sergio Paracuellos <sergio.paracuellos@gmail.com>
PCI: mt7621: Delay phy ports initialization
Chunfeng Yun <chunfeng.yun@mediatek.com>
phy: mediatek: remove temporary variable @mask_
Udipto Goswami <quic_ugoswami@quicinc.com>
usb: gadget: configfs: Restrict symlink creation is UDC already binded
Dan Carpenter <error27@gmail.com>
usb: musb: mediatek: don't unregister something that wasn't registered
Nikita Zhandarovich <n.zhandarovich@fintech.ru>
RDMA/cxgb4: add null-ptr-check after ip_dev_find()
Sherry Sun <sherry.sun@nxp.com>
tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
usb: early: xhci-dbc: Fix a potential out-of-bound memory access
Ivan Bornyakov <i.bornyakov@metrotek.ru>
fpga: microchip-spi: rewrite status polling in a time measurable way
Ivan Bornyakov <i.bornyakov@metrotek.ru>
fpga: microchip-spi: move SPI I/O buffers out of stack
Serge Semin <Sergey.Semin@baikalelectronics.ru>
dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers
Fabian Vogt <fabian@ritter-vogt.de>
fotg210-udc: Add missing completion handler
Chen Zhongjin <chenzhongjin@huawei.com>
firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle
Yang Yingliang <yangyingliang@huawei.com>
drivers: base: transport_class: fix resource leak when transport_add_device() fails
Yang Yingliang <yangyingliang@huawei.com>
drivers: base: transport_class: fix possible memory leak
Hanjun Guo <guohanjun@huawei.com>
driver core: location: Free struct acpi_pld_info *pld before return false
Zhengchao Shao <shaozhengchao@huawei.com>
driver core: fix resource leak in device_add()
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
misc: fastrpc: Fix an error handling path in fastrpc_rpmsg_probe()
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
misc/mei/hdcp: Use correct macros to initialize uuid_le
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
mei: pxp: Use correct macros to initialize uuid_le
George Kennedy <george.kennedy@oracle.com>
VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF
Yang Yingliang <yangyingliang@huawei.com>
firmware: stratix10-svc: fix error handle while alloc/add device failed
Yang Yingliang <yangyingliang@huawei.com>
firmware: stratix10-svc: add missing gen_pool_destroy() in stratix10_svc_drv_probe()
Xiongfeng Wang <wangxiongfeng2@huawei.com>
applicom: Fix PCI device refcount leak in applicom_init()
Yuan Can <yuancan@huawei.com>
eeprom: idt_89hpesx: Fix error handling in idt_init()
Duoming Zhou <duoming@zju.edu.cn>
Revert "char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol"
Yi Yang <yiyang13@huawei.com>
serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init()
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
tty: serial: qcom-geni-serial: stop operations in progress at shutdown
Sherry Sun <sherry.sun@nxp.com>
tty: serial: fsl_lpuart: clear LPUART Status Register in lpuart32_shutdown()
Sherry Sun <sherry.sun@nxp.com>
tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown()
Yicong Yang <yangyicong@hisilicon.com>
hwtracing: hisi_ptt: Only add the supported devices to the filters list
Yang Yingliang <yangyingliang@huawei.com>
PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc
Frank Li <frank.li@nxp.com>
PCI: endpoint: pci-epf-vntb: Clean up kernel_doc warning
Bjorn Helgaas <bhelgaas@google.com>
PCI: switchtec: Return -EFAULT for copy_to_user() errors
Alexey V. Vissarionov <gremlin@altlinux.org>
PCI/IOV: Enlarge virtfn sysfs name buffer
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
usb: typec: intel_pmc_mux: Don't leak the ACPI device reference count
Mao Jinlong <quic_jinlmao@quicinc.com>
coresight: cti: Add PM runtime call in enable_store
James Clark <james.clark@arm.com>
coresight: cti: Prevent negative values of enable count
Junhao He <hejunhao3@huawei.com>
coresight: etm4x: Fix accesses to TRCSEQRSTEVR and TRCSEQSTR
Ricardo Ribalda <ribalda@chromium.org>
media: uvcvideo: Refactor power_line_frequency_controls_limited
Ricardo Ribalda <ribalda@chromium.org>
media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX
Ricardo Ribalda <ribalda@chromium.org>
media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU
Hans Verkuil <hverkuil-cisco@xs4all.nl>
media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()
Al Viro <viro@zeniv.linux.org.uk>
alpha/boot/tools/objstrip: fix the check for ELF header
Wang Hai <wanghai38@huawei.com>
kobject: Fix slab-out-of-bounds in fill_kobj_path()
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kobject: modify kobject_get_path() to take a const *
Yang Yingliang <yangyingliang@huawei.com>
driver core: fix potential null-ptr-deref in device_add()
Richard Fitzgerald <rf@opensource.cirrus.com>
soundwire: cadence: Don't overflow the command FIFOs
Hanna Hawa <hhhawa@amazon.com>
i2c: designware: fix i2c_dw_clk_rate() return size to be u32
Gaosheng Cui <cuigaosheng1@huawei.com>
usb: gadget: fusb300_udc: free irq on the error path in fusb300_probe()
Ferry Toth <ftoth@exalondelft.nl>
iio: light: tsl2563: Do not hardcode interrupt trigger type
Miaoqian Lin <linmq006@gmail.com>
RDMA/hns: Fix refcount leak in hns_roce_mmap
Geert Uytterhoeven <geert+renesas@glider.be>
dmaengine: HISI_DMA should depend on ARCH_HISI
Miaoqian Lin <linmq006@gmail.com>
RDMA/erdma: Fix refcount leak in erdma_mmap
Fenghua Yu <fenghua.yu@intel.com>
dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0
Qiheng Lin <linqiheng@huawei.com>
mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
Randy Dunlap <rdunlap@infradead.org>
mfd: cs5535: Don't build on UML
Arnd Bergmann <arnd@arndb.de>
objtool: add UACCESS exceptions for __tsan_volatile_read/write
Kajol Jain <kjain@linux.ibm.com>
perf tests stat_all_metrics: Change true workload to sleep workload for system wide check
Arnd Bergmann <arnd@arndb.de>
printf: fix errname.c list
Yang Jihong <yangjihong1@huawei.com>
perf record: Fix segfault with --overwrite and --max-size
Guillaume Tucker <guillaume.tucker@collabora.com>
selftests: use printf instead of echo -ne
Masami Hiramatsu (Google) <mhiramat@kernel.org>
selftests/ftrace: Fix bash specific "==" operator
Guillaume Tucker <guillaume.tucker@collabora.com>
selftests: find echo binary to use -ne options
Randy Dunlap <rdunlap@infradead.org>
sparc: allow PM configs for sparc32 COMPILE_TEST
Yicong Yang <yangyicong@hisilicon.com>
perf tools: Fix auto-complete on aarch64
Athira Rajeev <atrajeev@linux.vnet.ibm.com>
perf test bpf: Skip test if kernel-debuginfo is not present
Namhyung Kim <namhyung@kernel.org>
perf intel-pt: Do not try to queue auxtrace data on pipe
Namhyung Kim <namhyung@kernel.org>
perf inject: Use perf_data__read() for auxtrace
Andreas Ziegler <br015@umbiko.net>
tools/tracing/rtla: osnoise_hist: use total duration for average calculation
Henning Schild <henning.schild@siemens.com>
leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest()
Miaoqian Lin <linmq006@gmail.com>
leds: led-core: Fix refcount leak in of_led_get()
Ian Rogers <irogers@google.com>
perf llvm: Fix inadvertent file creation
Andreas Gruenbacher <agruenba@redhat.com>
gfs2: jdata writepage fix
Shyam Prasad N <sprasad@microsoft.com>
cifs: use tcon allocation functions even for dummy tcon
Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
cifs: Fix warning and UAF when destroy the MR list
Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
cifs: Fix lost destroy smbd connection when MR allocate failed
Chuck Lever <chuck.lever@oracle.com>
NFSD: copy the whole verifier in nfsd_copy_write_verifier
Jeff Layton <jlayton@kernel.org>
nfsd: don't fsync nfsd_files on last close
Jeff Layton <jlayton@kernel.org>
nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open
Dai Ngo <dai.ngo@oracle.com>
NFSD: fix problems with cleanup on errors in nfsd4_copy
Jeff Layton <jlayton@kernel.org>
nfsd: clean up potential nfsd_file refcount leaks in COPY codepath
Benjamin Coddington <bcodding@redhat.com>
nfsd: fix race to check ls_layouts
Dai Ngo <dai.ngo@oracle.com>
NFSD: fix leaked reference count of nfsd4_ssc_umount_item
Dai Ngo <dai.ngo@oracle.com>
NFSD: enhance inter-server copy cleanup
Asahi Lina <lina@asahilina.net>
drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
Orlando Chamberlain <orlandoch.dev@gmail.com>
ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks
Pietro Borrello <borrello@diag.uniroma1.it>
hid: bigben_probe(): validate report count
Pietro Borrello <borrello@diag.uniroma1.it>
HID: bigben: use spinlock to safely schedule workers
Pietro Borrello <borrello@diag.uniroma1.it>
HID: bigben_worker() remove unneeded check on report_field
Pietro Borrello <borrello@diag.uniroma1.it>
HID: bigben: use spinlock to protect concurrent accesses
Lucas Tanure <lucas.tanure@collabora.com>
ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one()
NeilBrown <neilb@suse.de>
NFS: fix disabling of swap
Benjamin Coddington <bcodding@redhat.com>
nfs4trace: fix state manager flag printing
Mike Snitzer <snitzer@kernel.org>
dm: remove flush_scheduled_work() during local_exit()
Steffen Aschbacher <steffen.aschbacher@stihl.de>
ASoC: tlv320adcx140: fix 'ti,gpio-config' DT property init
Vadim Pasternak <vadimp@nvidia.com>
hwmon: (mlxreg-fan) Return zero speed for broken fan
William Zhang <william.zhang@broadcom.com>
spi: bcm63xx-hsspi: Fix multi-bit mode setting
Bastien Nocera <hadess@hadess.net>
HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support
Hamza Mahfooz <hamza.mahfooz@amd.com>
drm/amd/display: don't call dc_interrupt_set() for disabled crtcs
William Zhang <william.zhang@broadcom.com>
spi: bcm63xx-hsspi: Endianness fix for ARM based SoC
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
ASoC: codecs: lpass: fix incorrect mclk rate
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
ASoC: codecs: lpass: register mclk after runtime pm
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
ASoC: qcom: q6apm-dai: Add SNDRV_PCM_INFO_BATCH flag
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
ASoC: qcom: q6apm-dai: fix race condition while updating the position pointer
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared
Dmitry Torokhov <dmitry.torokhov@gmail.com>
HID: retain initial quirks set up when creating HID devices
Allen Ballway <ballway@chromium.org>
HID: multitouch: Add quirks for flipped axes
Jiasheng Jiang <jiasheng@iscas.ac.cn>
scsi: aic94xx: Add missing check for dma_map_single()
Tomas Henzl <thenzl@redhat.com>
scsi: mpt3sas: Fix a memory leak
Arnd Bergmann <arnd@arndb.de>
drm/amdgpu: fix enum odm_combine_mode mismatch
Jaroslav Kysela <perex@perex.cz>
ALSA: hda: Fix the control element identification for multiple codecs
Jonathan Cormier <jcormier@criticallink.com>
hwmon: (ltc2945) Handle error case in ltc2945_value_store
Eugene Shalygin <eugene.shalygin@gmail.com>
hwmon: (asus-ec-sensors) add missing mutex path
Jerome Neanne <jneanne@baylibre.com>
regulator: tps65219: use generic set_bypass()
Jerome Brunet <jbrunet@baylibre.com>
ASoC: dt-bindings: meson: fix gx-card codec node regex
Nathan Chancellor <nathan@kernel.org>
ASoC: mchp-spdifrx: Fix uninitialized use of mr in mchp_spdifrx_hw_params()
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
ASoC: rsnd: fixup #endif position
Daniel Golle <daniel@makrotopia.org>
regmap: apply reg_base and reg_downshift for single register ops
Mike Snitzer <snitzer@kernel.org>
dm: improve shrinker debug names
Claudiu Beznea <claudiu.beznea@microchip.com>
ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove()
Claudiu Beznea <claudiu.beznea@microchip.com>
ASoC: mchp-spdifrx: fix controls that works with completion mechanism
Claudiu Beznea <claudiu.beznea@microchip.com>
ASoC: mchp-spdifrx: fix return value in case completion times out
Claudiu Beznea <claudiu.beznea@microchip.com>
ASoC: mchp-spdifrx: fix controls which rely on rsr register
Arnd Bergmann <arnd@arndb.de>
spi: dw_bt1: fix MUX_MMIO dependencies
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
ASoC: topology: Properly access value coming from topology file
Haibo Chen <haibo.chen@nxp.com>
gpio: vf610: connect GPIO label to dev name
Allen-KH Cheng <allen-kh.cheng@mediatek.com>
dt-bindings: display: mediatek: Fix the fallback for mediatek,mt8186-disp-ccorr
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress()
Nícolas F. R. A. Prado <nfraprado@collabora.com>
drm/mediatek: Clean dangling pointer on bind error path
ruanjinjie <ruanjinjie@huawei.com>
drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc
Rob Clark <robdclark@chromium.org>
drm/mediatek: Drop unbalanced obj unref
Miles Chen <miles.chen@mediatek.com>
drm/mediatek: Use NULL instead of 0 for NULL pointer
Xinlei Lee <xinlei.lee@mediatek.com>
drm/mediatek: dsi: Reduce the time of dsi from LP11 to sending cmd
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update()
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts
Mikko Perttunen <mperttunen@nvidia.com>
drm/tegra: firewall: Check for is_addr_reg existence in IMM check
Mikko Perttunen <mperttunen@nvidia.com>
gpu: host1x: Don't skip assigning syncpoints to channels
Mikko Perttunen <mperttunen@nvidia.com>
gpu: host1x: Fix mask for syncpoint increment register
Guodong Liu <Guodong.Liu@mediatek.com>
pinctrl: mediatek: Initialize variable *buf to zero
Guodong Liu <Guodong.Liu@mediatek.com>
pinctrl: mediatek: Initialize variable pullen and pullup to zero
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback()
farah kassabri <fkassabri@habana.ai>
habanalabs: bugs fixes in timestamps buff alloc
Jiasheng Jiang <jiasheng@iscas.ac.cn>
drm/msm/mdp5: Add check for kzalloc
Jiasheng Jiang <jiasheng@iscas.ac.cn>
drm/msm/dpu: Add check for pstates
Jiasheng Jiang <jiasheng@iscas.ac.cn>
drm/msm/dpu: Add check for cstate
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/msm: use strscpy instead of strncpy
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/msm/dpu: sc7180: add missing WB2 clock control
Bart Van Assche <bvanassche@acm.org>
scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
Konrad Dybcio <konrad.dybcio@linaro.org>
drm/msm/dsi: Allow 2 CTRLs on v2.5.0
Jagan Teki <jagan@amarulasolutions.com>
drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags
Daniel Mentz <danielmentz@google.com>
drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness
Randy Dunlap <rdunlap@infradead.org>
regulator: tps65219: use IS_ERR() to detect an error pointer
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/bridge: lt9611: pass a pointer to the of node
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/bridge: lt9611: fix clock calculation
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/bridge: lt9611: fix programming of video modes
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/bridge: lt9611: fix polarity programming
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/bridge: lt9611: fix HPD reenablement
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/bridge: lt9611: fix sleep mode setup
Marijn Suijten <marijn.suijten@somainline.org>
drm/msm/dpu: Disallow unallocated resources to be returned
Jiasheng Jiang <jiasheng@iscas.ac.cn>
drm/msm/gem: Add check for kmalloc
Leo Liu <leo.liu@amd.com>
drm/amdgpu: Use the sched from entity for amdgpu_cs trace
Alexey V. Vissarionov <gremlin@altlinux.org>
ALSA: hda/ca0132: minor fix for allocation size
Akhil P Oommen <quic_akhilpo@quicinc.com>
drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()
Marek Vasut <marex@denx.de>
drm/bridge: tc358767: Set default CLRSIPO count
Shengjiu Wang <shengjiu.wang@nxp.com>
ASoC: fsl_sai: initialize is_dsp_mode flag
Quinn Tran <qutran@marvell.com>
scsi: qla2xxx: edif: Fix clang warning
Quinn Tran <qutran@marvell.com>
scsi: qla2xxx: Fix exchange oversubscription for management commands
Quinn Tran <qutran@marvell.com>
scsi: qla2xxx: Fix exchange oversubscription
Abel Vesa <abel.vesa@linaro.org>
drm/panel-edp: fix name for IVO product id 854b
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/msm: clean event_thread->worker in case of an error
Dave Stevenson <dave.stevenson@raspberrypi.com>
drm/vc4: hdmi: Correct interlaced timings again
Dave Stevenson <dave.stevenson@raspberrypi.com>
drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5
Dave Stevenson <dave.stevenson@raspberrypi.com>
drm/vc4: hvs: Correct interrupt masking bit assignment for HVS5
Dave Stevenson <dave.stevenson@raspberrypi.com>
drm/vc4: hvs: SCALER_DISPBKGND_AUTOHS is only valid on HVS4
Dave Stevenson <dave.stevenson@raspberrypi.com>
drm/vc4: hvs: Set AXI panic modes
Miaoqian Lin <linmq006@gmail.com>
pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups
Miaoqian Lin <linmq006@gmail.com>
pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain
Adam Skladowski <a39.skl@gmail.com>
pinctrl: qcom: pinctrl-msm8976: Correct function names for wcss pins
Jiasheng Jiang <jiasheng@iscas.ac.cn>
drm/msm/hdmi: Add missing check for alloc_ordered_workqueue
Hui Tang <tanghui20@huawei.com>
drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init()
Armin Wolf <W_Armin@gmx.de>
hwmon: (ftsteutates) Fix scaling of measurements
Maíra Canal <mcanal@igalia.com>
drm/vc4: drop all currently held locks if deadlock happens
Liang He <windhl@126.com>
gpu: ipu-v3: common: Add of_node_put() for reference returned by of_graph_get_port_by_id()
Randolph Sapp <rs@ti.com>
drm: tidss: Fix pixel format definition
Dave Stevenson <dave.stevenson@raspberrypi.com>
drm/vc4: dpi: Fix format mapping for RGB565
Yuan Can <yuancan@huawei.com>
drm/vkms: Fix null-ptr-deref in vkms_release()
Yuan Can <yuancan@huawei.com>
drm/vkms: Fix memory leak in vkms_init()
Yuan Can <yuancan@huawei.com>
drm/bridge: megachips: Fix error handling in i2c_register_driver()
Geert Uytterhoeven <geert+renesas@glider.be>
drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC
Geert Uytterhoeven <geert+renesas@glider.be>
drm: mxsfb: DRM_IMX_LCDIF should depend on ARCH_MXC
Frieder Schrempf <frieder.schrempf@kontron.de>
drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match spec
Geert Uytterhoeven <geert@linux-m68k.org>
drm/fourcc: Add missing big-endian XRGB1555 and RGB565 formats
Shang XiaoJing <shangxiaojing@huawei.com>
drm: Fix potential null-ptr-deref due to drmm_mode_config_init()
Jiri Pirko <jiri@nvidia.com>
sefltests: netdevsim: wait for devlink instance after netns removal
Roxana Nicolescu <roxana.nicolescu@canonical.com>
selftest: fib_tests: Always cleanup before exit
Kees Cook <keescook@chromium.org>
net/mlx4_en: Introduce flexible array to silence overflow warning
Horatiu Vultur <horatiu.vultur@microchip.com>
net: lan966x: Fix possible deadlock inside PTP
Doug Berger <opendmb@gmail.com>
net: bcmgenet: fix MoCA LED control
Shigeru Yoshida <syoshida@redhat.com>
l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register()
Jakub Sitnicki <jakub@cloudflare.com>
selftests/net: Interpret UDP_GRO cmsg data as an int value
D. Wythe <alibuda@linux.alibaba.com>
net/smc: fix application data exception
D. Wythe <alibuda@linux.alibaba.com>
net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link()
Florian Fainelli <f.fainelli@gmail.com>
irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
Florian Fainelli <f.fainelli@gmail.com>
irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
Andrii Nakryiko <andrii@kernel.org>
bpf: Fix global subprog context argument resolution logic
Hengqi Chen <hengqi.chen@gmail.com>
LoongArch, bpf: Use 4 instructions for function address in JIT
Maciej Fijalkowski <maciej.fijalkowski@intel.com>
xsk: check IFF_UP earlier in Tx path
Frank Jungclaus <frank.jungclaus@esd.eu>
can: esd_usb: Make use of can_change_state() and relocate checking skb for NULL
Frank Jungclaus <frank.jungclaus@esd.eu>
can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error
Ilya Leoshkevich <iii@linux.ibm.com>
selftests/bpf: Fix xdp_do_redirect on s390x
Hou Tao <houtao1@huawei.com>
bpf: Zeroing allocated object from slab in bpf memory allocator
Johannes Berg <johannes.berg@intel.com>
wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()
Alexei Starovoitov <ast@kernel.org>
selftests/bpf: Fix map_kptr test.
Yongqin Liu <yongqin.liu@linaro.org>
thermal/drivers/hisi: Drop second sensor hi3660
Vincent Guittot <vincent.guittot@linaro.org>
tools/lib/thermal: Fix thermal_sampling_exit()
Johannes Berg <johannes.berg@intel.com>
wifi: mac80211: fix off-by-one link setting
Arnd Bergmann <arnd@arndb.de>
wifi: mac80211: avoid u32_encode_bits() warning
Andrei Otcheretianski <andrei.otcheretianski@intel.com>
wifi: mac80211: Don't translate MLD addresses for multicast
Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
wifi: mac80211: fix non-MLO station association
Shayne Chen <shayne.chen@mediatek.com>
wifi: mac80211: make rate u32 in sta_set_rate_info_rx()
Lorenzo Bianconi <lorenzo@kernel.org>
wifi: mac80211: move color collision detection report in a delayed work
Herbert Xu <herbert@gondor.apana.org.au>
crypto: crypto4xx - Call dma_unmap_page when done
Alexander Lobakin <alobakin@pm.me>
crypto: octeontx2 - Fix objects shared between several modules
Werner Sembach <wse@tuxedocomputers.com>
ACPI: resource: Do IRQ override on all TongFang GMxRGxx
Adam Niederer <adam.niederer@gmail.com>
ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
Ilya Leoshkevich <iii@linux.ibm.com>
selftests/bpf: Fix out-of-srctree build
Dan Carpenter <error27@gmail.com>
wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize()
Jiasheng Jiang <jiasheng@iscas.ac.cn>
wifi: iwl4965: Add missing check for create_singlethread_workqueue()
Jiasheng Jiang <jiasheng@iscas.ac.cn>
wifi: iwl3945: Add missing check for create_singlethread_workqueue
Matt Evans <mev@rivosinc.com>
clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
Conor Dooley <conor.dooley@microchip.com>
RISC-V: time: initialize hrtimer based broadcast clock event device
Randy Dunlap <rdunlap@infradead.org>
m68k: /proc/hardware should depend on PROC_FS
Herbert Xu <herbert@gondor.apana.org.au>
crypto: rsa-pkcs1pad - Use akcipher_request_complete
Pietro Borrello <borrello@diag.uniroma1.it>
rds: rds_rm_zerocopy_callback() correct order for list_add_tail()
Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
xen/grant-dma-iommu: Implement a dummy probe_device() callback
Ilya Leoshkevich <iii@linux.ibm.com>
libbpf: Fix alen calculation in libbpf_nla_dump_errormsg()
Halil Pasic <pasic@linux.ibm.com>
s390/ap: fix status returned by ap_qact()
Halil Pasic <pasic@linux.ibm.com>
s390/ap: fix status returned by ap_aqic()
Halil Pasic <pasic@linux.ibm.com>
s390: vfio-ap: tighten the NIB validity check
Alex Elder <elder@linaro.org>
net: ipa: generic command param fix
Zhengping Jiang <jiangzp@google.com>
Bluetooth: hci_qca: get wakeup status from serdev device handle
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: L2CAP: Fix potential user-after-free
Kees Cook <keescook@chromium.org>
Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds
Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
cpufreq: davinci: Fix clk use after free
Qi Zheng <zhengqi.arch@bytedance.com>
OPP: fix error checking in opp_migrate_dentry()
Pietro Borrello <borrello@diag.uniroma1.it>
tap: tap_open(): correctly initialize socket uid
Pietro Borrello <borrello@diag.uniroma1.it>
tun: tun_chr_open(): correctly initialize socket uid
Pietro Borrello <borrello@diag.uniroma1.it>
net: add sock_init_data_uid()
Vasily Gorbik <gor@linux.ibm.com>
s390/boot: fix mem_detect extended area allocation
Vasily Gorbik <gor@linux.ibm.com>
s390/mem_detect: rely on diag260() if sclp_early_get_memsize() fails
Alexander Gordeev <agordeev@linux.ibm.com>
s390/boot: cleanup decompressor header files
Vasily Gorbik <gor@linux.ibm.com>
s390/vmem: fix empty page tables cleanup under KASAN
Vasily Gorbik <gor@linux.ibm.com>
s390/mem_detect: fix detect_memory() error handling
Miaoqian Lin <linmq006@gmail.com>
irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe
Miaoqian Lin <linmq006@gmail.com>
irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe
Miaoqian Lin <linmq006@gmail.com>
irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains
Miaoqian Lin <linmq006@gmail.com>
irqchip: Fix refcount leak in platform_irqchip_probe
Jack Morgenstein <jackm@nvidia.com>
net/mlx5: Enhance debug print in page allocation failure
Aaron Ma <aaron.ma@canonical.com>
wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read
Deren Wu <deren.wu@mediatek.com>
wifi: mt76: add memory barrier to SDIO queue kick
Ryder Lee <ryder.lee@mediatek.com>
wifi: mt76: mt7915: fix WED TxS reporting
Lorenzo Bianconi <lorenzo@kernel.org>
wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit
Howard Hsu <howard-yh.hsu@mediatek.com>
wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work
Tonghao Zhang <tong@infragraf.org>
bpftool: profile online CPUs instead of possible
Tom Lendacky <thomas.lendacky@amd.com>
crypto: ccp - Flush the SEV-ES TMR memory before giving it to firmware
Ilya Leoshkevich <iii@linux.ibm.com>
selftests/bpf: Initialize tc in xdp_synproxy
Geert Uytterhoeven <geert+renesas@glider.be>
can: rcar_canfd: Fix R-Car V3U GAFLCFG field accesses
Mark Brown <broonie@kernel.org>
kselftest/arm64: Fix enumeration of systems without 128 bit SME
Gregory Greenman <gregory.greenman@intel.com>
wifi: iwlwifi: mei: fix compilation errors in rfkill()
Ilya Leoshkevich <iii@linux.ibm.com>
s390/bpf: Add expoline to tail calls
Hans de Goede <hdegoede@redhat.com>
leds: led-class: Add missing put_device() to led_put()
Herbert Xu <herbert@gondor.apana.org.au>
crypto: xts - Handle EBUSY correctly
Daniel T. Lee <danieltimlee@gmail.com>
selftests/bpf: Fix vmtest static compilation error
Artem Savkov <asavkov@redhat.com>
selftests/bpf: Use consistent build-id type for liburandom_read.so
Ashok Raj <ashok.raj@intel.com>
x86/microcode: Adjust late loading result reporting message
Ashok Raj <ashok.raj@intel.com>
x86/microcode: Check CPU capabilities after late microcode update correctly
Ashok Raj <ashok.raj@intel.com>
x86/microcode: Add a parameter to microcode_check() to store CPU capabilities
Yang Yingliang <yangyingliang@huawei.com>
powercap: fix possible name leak in powercap_register_zone()
Herbert Xu <herbert@gondor.apana.org.au>
crypto: seqiv - Handle EBUSY correctly
Herbert Xu <herbert@gondor.apana.org.au>
crypto: essiv - Handle EBUSY correctly
Koba Ko <koba.taiwan@gmail.com>
crypto: ccp - Failure on re-initialization due to duplicate sysfs filename
Tiezhu Yang <yangtiezhu@loongson.cn>
selftests/bpf: Fix build errors if CONFIG_NF_CONNTRACK=m
Armin Wolf <W_Armin@gmx.de>
ACPI: battery: Fix missing NUL-termination with large strings
Shivani Baranwal <quic_shivbara@quicinc.com>
wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data()
Miaoqian Lin <linmq006@gmail.com>
wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup
Minsuk Kang <linuxlovemin@yonsei.ac.kr>
wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()
Fedor Pchelkin <pchelkin@ispras.ru>
wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails
Fedor Pchelkin <pchelkin@ispras.ru>
wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function
Viorel Suman <viorel.suman@nxp.com>
thermal/drivers/imx_sc_thermal: Fix the loop condition
Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
thermal/drivers/imx_sc_thermal: Drop empty platform remove function
Alexey Kodanev <aleksei.kodanev@bell-sw.com>
wifi: orinoco: check return value of hermes_write_wordrec()
Bitterblue Smith <rtl8821cerfe2@gmail.com>
wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU
Jiasheng Jiang <jiasheng@iscas.ac.cn>
wifi: rtw89: Add missing check for alloc_workqueue
Zong-Zhe Yang <kevin_yang@realtek.com>
wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie()
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
thermal/drivers/tsens: limit num_sensors to 9 for msm8939
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
thermal/drivers/tsens: fix slope values for msm8939
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
thermal/drivers/tsens: Sort out msm8976 vs msm8956 data
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
thermal/drivers/tsens: Drop msm8976-specific defines
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
x86/signal: Fix the value returned by strict_sas_size()
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
s390/vfio-ap: fix an error handling path in vfio_ap_mdev_probe_queue()
Alexander Gordeev <agordeev@linux.ibm.com>
s390/early: fix sclp_early_sccb variable lifetime
Lai Jiangshan <jiangshan.ljs@antgroup.com>
workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex
Mark Brown <broonie@kernel.org>
kselftest/arm64: Fix syscall-abi for systems without 128 bit SME
Mark Brown <broonie@kernel.org>
arm64/cpufeature: Fix field sign for DIT hwcap detection
Magnus Karlsson <magnus.karlsson@intel.com>
selftests/xsk: print correct error codes when exiting
Magnus Karlsson <magnus.karlsson@intel.com>
selftests/xsk: print correct payload for packet dump
Daniil Tatianin <d-tatianin@yandex-team.ru>
ACPICA: nsrepair: handle cases without a return value correctly
Prashant Malani <pmalani@chromium.org>
platform/chrome: cros_ec_typec: Update port DP VDO
David Rientjes <rientjes@google.com>
crypto: ccp - Avoid page allocation failure warning for SEV_GET_ID2
Herbert Xu <herbert@gondor.apana.org.au>
lib/mpi: Fix buffer overrun when SG is too long
Frederic Weisbecker <frederic@kernel.org>
rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()
Frederic Weisbecker <frederic@kernel.org>
rcu-tasks: Remove preemption disablement around srcu_read_[un]lock() calls
Frederic Weisbecker <frederic@kernel.org>
rcu-tasks: Improve comments explaining tasks_rcu_exit_srcu purpose
Zhen Lei <thunder.leizhen@huawei.com>
genirq: Fix the return type of kstat_cpu_irqs_sum()
Mario Limonciello <mario.limonciello@amd.com>
ACPICA: Drop port I/O validation for some regions
Eric Biggers <ebiggers@google.com>
crypto: x86/ghash - fix unaligned access in ghash_setkey()
Daniel T. Lee <danieltimlee@gmail.com>
libbpf: Fix invalid return address register in s390
Yang Yingliang <yangyingliang@huawei.com>
wifi: wl3501_cs: don't call kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
wifi: libertas: cmdresp: don't call kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
wifi: libertas: main: don't call kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
wifi: libertas: if_usb: don't call kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
wifi: libertas_tf: don't call kfree_skb() under spin_lock_irqsave()
Zhengchao Shao <shaozhengchao@huawei.com>
wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid()
Zhang Changzhong <zhangchangzhong@huawei.com>
wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit()
Wang Yufen <wangyufen@huawei.com>
wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init()
Zhang Changzhong <zhangchangzhong@huawei.com>
wifi: wilc1000: fix potential memory leak in wilc_mac_xmit()
Zhengchao Shao <shaozhengchao@huawei.com>
wifi: ipw2200: fix memory leak in ipw_wdev_init()
Yang Yingliang <yangyingliang@huawei.com>
wifi: ipw2x00: don't call dev_kfree_skb() under spin_lock_irqsave()
Andrii Nakryiko <andrii@kernel.org>
libbpf: Fix btf__align_of() by taking into account field offsets
Li Zetao <lizetao1@huawei.com>
wifi: rtlwifi: Fix global-out-of-bounds bug in _rtl8812ae_phy_set_txpower_limit()
Ping-Ke Shih <pkshih@realtek.com>
wifi: rtw89: 8852c: rfk: correct DPK settings
Ping-Ke Shih <pkshih@realtek.com>
wifi: rtw89: 8852c: rfk: correct DACK setting
Yang Yingliang <yangyingliang@huawei.com>
wifi: rtl8xxxu: don't call dev_kfree_skb() under spin_lock_irqsave()
Zhengchao Shao <shaozhengchao@huawei.com>
wifi: libertas: fix memory leak in lbs_init_adapter()
Yang Yingliang <yangyingliang@huawei.com>
wifi: iwlegacy: common: don't call dev_kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
wifi: rtlwifi: rtl8723be: don't call kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
wifi: rtlwifi: rtl8188ee: don't call kfree_skb() under spin_lock_irqsave()
Yang Yingliang <yangyingliang@huawei.com>
wifi: rtlwifi: rtl8821ae: don't call kfree_skb() under spin_lock_irqsave()
Yuan Can <yuancan@huawei.com>
wifi: rsi: Fix memory leak in rsi_coex_attach()
Deren Wu <deren.wu@mediatek.com>
wifi: mt76: fix coverity uninit_use_in_call in mt76_connac2_reverse_frag0_hdr_trans()
Ryder Lee <ryder.lee@mediatek.com>
wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read()
Ryder Lee <ryder.lee@mediatek.com>
wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr()
Ryder Lee <ryder.lee@mediatek.com>
wifi: mt76: mt7915: check return value before accessing free_block_num
Deren Wu <deren.wu@mediatek.com>
wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host
Wang Yufen <wangyufen@huawei.com>
wifi: mt76: mt7915: add missing of_node_put()
Jens Axboe <axboe@kernel.dk>
block: use proper return value from bio_failfast()
Martin K. Petersen <martin.petersen@oracle.com>
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
Jinke Han <hanjinke.666@bytedance.com>
block: Fix io statistics for cgroup in throttle path
Ming Lei <ming.lei@redhat.com>
block: sync mixed merged request's failfast with 1st bio's
Jingbo Xu <jefflexu@linux.alibaba.com>
erofs: relinquish volume with mutex held
Konrad Dybcio <konrad.dybcio@linaro.org>
arm64: dts: qcom: pmk8350: Use the correct PON compatible
Konrad Dybcio <konrad.dybcio@linaro.org>
arm64: dts: qcom: pmk8350: Specify PBS register for PON
Liu Xiaodong <xiaodong.liu@intel.com>
block: ublk: check IO buffer based on flag need_get_data
Denis Kenzior <denkenz@gmail.com>
KEYS: asymmetric: Fix ECDSA use via keyctl uapi
silviazhao <silviazhao-oc@zhaoxin.com>
x86/perf/zhaoxin: Add stepping check for ZXC
Kan Liang <kan.liang@linux.intel.com>
perf/x86/intel/ds: Fix the conversion from TSC to perf time
Pietro Borrello <borrello@diag.uniroma1.it>
sched/rt: pick_next_rt_entity(): check list_entry
Qiheng Lin <linqiheng@huawei.com>
s390/dasd: Fix potential memleak in dasd_eckd_init()
Petr Vorel <pvorel@suse.cz>
arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
Konrad Dybcio <konrad.dybcio@linaro.org>
arm64: dts: qcom: msm8992-*: Fix up comments
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
Jamie Douglass <jamiemdouglass@gmail.com>
arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: sm8450: drop incorrect cells from serial
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: sm8350: drop incorrect cells from serial
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input
Kemeng Shi <shikemeng@huaweicloud.com>
blk-mq: correct stale comment of .get_budget
Kemeng Shi <shikemeng@huaweicloud.com>
blk-mq: Fix potential io hung for shared sbitmap per tagset
Kemeng Shi <shikemeng@huaweicloud.com>
blk-mq: wait on correct sbitmap_queue in blk_mq_mark_tag_wait
Kemeng Shi <shikemeng@huaweicloud.com>
blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx
Kemeng Shi <shikemeng@huaweicloud.com>
blk-mq: avoid sleep in blk_mq_alloc_request_hctx
Patrick Delaunay <patrick.delaunay@foss.st.com>
ARM: dts: stm32: Update part number NVMEM description on stm32mp131
Allen-KH Cheng <allen-kh.cheng@mediatek.com>
arm64: dts: mediatek: mt7986: Fix watchdog compatible
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mediatek: mt8195: Fix watchdog compatible
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mediatek: mt8186: Fix watchdog compatible
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mt8186: Fix CPU map for single-cluster SoC
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mt8192: Fix CPU map for single-cluster SoC
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mt8195: Fix CPU map for single-cluster SoC
Kemeng Shi <shikemeng@huaweicloud.com>
sbitmap: correct wake_batch recalculation to avoid potential IO hung
Gabriel Krisman Bertazi <krisman@suse.de>
sbitmap: Use single per-bitmap counting to wake up queued tags
Kemeng Shi <shikemeng@huaweicloud.com>
sbitmap: remove redundant check in __sbitmap_queue_get_batch
Peng Fan <peng.fan@nxp.com>
ARM: dts: imx7s: correct iomuxc gpr mux controller cells
Ming Lei <ming.lei@redhat.com>
ublk_drv: don't probe partitions if the ubq daemon isn't trusted
Ming Lei <ming.lei@redhat.com>
ublk_drv: remove nr_aborted_queues from ublk_device
Samuel Holland <samuel@sholland.org>
ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference
Christian Hewitt <christianshewitt@gmail.com>
arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
Christian Hewitt <christianshewitt@gmail.com>
arm64: dts: meson: radxa-zero: allow usb otg mode
Adam Ford <aford173@gmail.com>
arm64: dts: renesas: beacon-renesom: Fix gpio expander reference
Waiman Long <longman@redhat.com>
locking/rwsem: Disable preemption in all down_read*() and up_read() code paths
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node name
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix invalid rtc node name
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-gxl-s905w-jethome-jethub-j80: fix invalid rtc node name
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-gx: add missing unit address to rng node name
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names property
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix supply name of USB controller node
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-axg: fix SCPI clock dvfs node name
Neil Armstrong <neil.armstrong@linaro.org>
arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name
Angus Chen <angus.chen@jaguarmicro.com>
ARM: imx: Call ida_simple_remove() for ida_simple_get
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ARM: dts: exynos: correct wr-active property in Exynos3250 Rinato
Vaishnav Achath <vaishnav.a@ti.com>
arm64: dts: ti: k3-j7200: Fix wakeup pinmux range
Arnd Bergmann <arnd@arndb.de>
ARM: s3c: fix s3c64xx_set_timer_source prototype
Stefan Wahren <stefan.wahren@i2se.com>
ARM: bcm2835_defconfig: Enable the framebuffer
Chen-Yu Tsai <wenst@chromium.org>
arm64: dts: mediatek: mt8192: Mark scp_adsp clock as broken
Yang Yingliang <yangyingliang@huawei.com>
ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
Christian Hewitt <christianshewitt@gmail.com>
arm64: dts: meson: remove CPU opps below 1GHz for G12A boards
Robert Marko <robimarko@gmail.com>
arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names
Robert Marko <robimarko@gmail.com>
arm64: dts: qcom: ipq8074: fix Gen3 PCIe node
Robert Marko <robimarko@gmail.com>
arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges
Robert Marko <robimarko@gmail.com>
arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY
Robert Marko <robimarko@gmail.com>
arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY
Robert Marko <robimarko@gmail.com>
arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names
Petr Vorel <petr.vorel@gmail.com>
arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_mem
Petr Vorel <petr.vorel@gmail.com>
arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size
Dominik Kobinski <dominikkobinski314@gmail.com>
arm64: dts: msm8992-bullhead: add memory hole region
Thierry Reding <treding@nvidia.com>
arm64: tegra: Fix duplicate regulator on Jetson TX1
Dhruva Gole <d-gole@ti.com>
arm64: dts: ti: k3-am62-main: Fix clocks for McSPI
Andrew Davis <afd@ti.com>
arm64: dts: ti: k3-am62: Enable SPI nodes at the board level
Peter Zijlstra <peterz@infradead.org>
cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again*
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
arm64: dts: meson-g12a: Fix internal Ethernet PHY unit name
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
arm64: dts: meson-gx: Fix Ethernet MAC address unit name
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node
Bjorn Andersson <quic_bjorande@quicinc.com>
arm64: dts: qcom: sc8280xp: Vote for CX in USB controllers
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: sc8280xp: correct SPMI bus address cells
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: sc7280: correct SPMI bus address cells
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: sc7180: correct SPMI bus address cells
Kishon Vijay Abraham I <kvijayab@amd.com>
x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: qcom: sdm845-db845c: fix audio codec interrupt pin name
Chen-Yu Tsai <wenst@chromium.org>
arm64: dts: mediatek: mt8186: Fix systimer 13 MHz clock description
Chen-Yu Tsai <wenst@chromium.org>
arm64: dts: mediatek: mt8195: Fix systimer 13 MHz clock description
Chen-Yu Tsai <wenst@chromium.org>
arm64: dts: mediatek: mt8192: Fix systimer 13 MHz clock description
Chen-Yu Tsai <wenst@chromium.org>
arm64: dts: mediatek: mt8183: Fix systimer 13 MHz clock description
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arm64: dts: mediatek: mt8195: Add power domain to U3PHY1 T-PHY
Qiheng Lin <linqiheng@huawei.com>
ARM: zynq: Fix refcount leak in zynq_early_slcr_init
Marek Vasut <marex@denx.de>
arm64: dts: imx8m: Align SoC unique ID node unit address
Marijn Suijten <marijn.suijten@somainline.org>
arm64: dts: qcom: sm6125-seine: Clean up gpio-keys (volume down)
Marijn Suijten <marijn.suijten@somainline.org>
arm64: dts: qcom: sm6125: Reorder HSUSB PHY clocks to match bindings
Konrad Dybcio <konrad.dybcio@linaro.org>
arm64: dts: qcom: sm6350: Fix up the ramoops node
Marijn Suijten <marijn.suijten@somainline.org>
arm64: dts: qcom: sm8150-kumano: Panel framebuffer is 2.5k instead of 4k
Konrad Dybcio <konrad.dybcio@linaro.org>
arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
arm64: dts: qcom: qcs404: use symbol names for PCIe resets
Chen Hui <judy.chenhui@huawei.com>
ARM: OMAP2+: Fix memory leak in realtime_counter_init()
Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"
Anders Roxell <anders.roxell@linaro.org>
powerpc/mm: Rearrange if-else block to avoid clang warning
Pietro Borrello <borrello@diag.uniroma1.it>
HID: asus: use spinlock to safely schedule workers
Pietro Borrello <borrello@diag.uniroma1.it>
HID: asus: use spinlock to protect concurrent accesses
-------------
Diffstat:
Documentation/admin-guide/cgroup-v1/memory.rst | 13 +-
Documentation/admin-guide/hw-vuln/spectre.rst | 21 +-
Documentation/admin-guide/kdump/gdbmacros.txt | 2 +-
Documentation/bpf/instruction-set.rst | 16 +-
Documentation/dev-tools/gdb-kernel-debugging.rst | 4 +
.../bindings/display/mediatek/mediatek,ccorr.yaml | 2 +-
.../bindings/sound/amlogic,gx-sound-card.yaml | 2 +-
Documentation/hwmon/ftsteutates.rst | 4 +
Documentation/virt/kvm/api.rst | 18 +-
Documentation/virt/kvm/devices/vm.rst | 4 +
Makefile | 4 +-
arch/alpha/boot/tools/objstrip.c | 2 +-
arch/alpha/kernel/traps.c | 30 +-
arch/arm/boot/dts/exynos3250-rinato.dts | 2 +-
arch/arm/boot/dts/exynos4-cpu-thermal.dtsi | 2 +-
arch/arm/boot/dts/exynos4.dtsi | 2 +-
arch/arm/boot/dts/exynos4210.dtsi | 1 -
arch/arm/boot/dts/exynos5250.dtsi | 2 +-
arch/arm/boot/dts/exynos5410-odroidxu.dts | 1 -
arch/arm/boot/dts/exynos5420.dtsi | 2 +-
arch/arm/boot/dts/exynos5422-odroidhc1.dts | 10 +-
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 10 +-
arch/arm/boot/dts/imx7s.dtsi | 2 +-
arch/arm/boot/dts/qcom-sdx55.dtsi | 2 +-
arch/arm/boot/dts/qcom-sdx65.dtsi | 2 +-
arch/arm/boot/dts/stm32mp131.dtsi | 1 +
arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts | 2 +-
arch/arm/configs/bcm2835_defconfig | 1 +
arch/arm/mach-imx/mmdc.c | 24 +-
arch/arm/mach-omap1/timer.c | 2 +-
arch/arm/mach-omap2/omap4-common.c | 1 +
arch/arm/mach-omap2/timer.c | 1 +
arch/arm/mach-s3c/s3c64xx.c | 3 +-
arch/arm/mach-zynq/slcr.c | 1 +
arch/arm64/Kconfig | 1 -
.../dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi | 10 +-
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 +-
.../boot/dts/amlogic/meson-g12a-radxa-zero.dts | 1 -
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 20 -
.../boot/dts/amlogic/meson-gx-libretech-pc.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 2 +-
.../dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 2 +-
.../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 1 -
.../amlogic/meson-gxl-s905w-jethome-jethub-j80.dts | 6 +-
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
.../boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 6 +-
.../boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 10 +-
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +-
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 1 +
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 3 +-
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 12 +-
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 17 +-
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 25 +-
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 25 +-
arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 2 +-
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 63 +--
arch/arm64/boot/dts/qcom/msm8953.dtsi | 2 +-
.../boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts | 3 +-
.../boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts | 3 +-
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi | 37 +-
arch/arm64/boot/dts/qcom/msm8992.dtsi | 3 +-
.../boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 5 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 22 +-
arch/arm64/boot/dts/qcom/pmk8350.dtsi | 5 +-
arch/arm64/boot/dts/qcom/qcs404.dtsi | 12 +-
arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 +-
arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 +-
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 6 +-
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 2 +-
.../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 19 +-
arch/arm64/boot/dts/qcom/sm6125.dtsi | 6 +-
arch/arm64/boot/dts/qcom/sm6350.dtsi | 7 +-
.../boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 7 +-
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 -
arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 -
.../boot/dts/renesas/beacon-renesom-baseboard.dtsi | 24 +-
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 9 +-
arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi | 2 +
.../boot/dts/ti/k3-j7200-common-proc-board.dts | 2 +-
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 29 +-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 2 +
arch/arm64/kernel/cpufeature.c | 2 +-
arch/loongarch/net/bpf_jit.c | 2 +-
arch/loongarch/net/bpf_jit.h | 21 +
arch/m68k/68000/entry.S | 2 +
arch/m68k/Kconfig.devices | 1 +
arch/m68k/coldfire/entry.S | 2 +
arch/m68k/kernel/entry.S | 3 +
arch/mips/boot/dts/ingenic/ci20.dts | 2 +-
arch/mips/include/asm/syscall.h | 2 +-
arch/powerpc/Makefile | 2 +-
arch/powerpc/boot/Makefile | 14 +-
arch/powerpc/mm/book3s64/radix_tlb.c | 11 +-
arch/riscv/Makefile | 6 +-
arch/riscv/include/asm/ftrace.h | 50 ++-
arch/riscv/include/asm/jump_label.h | 2 +
arch/riscv/include/asm/pgtable.h | 2 +-
arch/riscv/include/asm/thread_info.h | 1 +
arch/riscv/kernel/ftrace.c | 65 +--
arch/riscv/kernel/mcount-dyn.S | 42 +-
arch/riscv/kernel/time.c | 3 +
arch/riscv/kernel/traps.c | 5 +-
arch/riscv/mm/fault.c | 10 +-
arch/s390/boot/boot.h | 26 +-
arch/s390/boot/decompressor.c | 1 +
arch/s390/boot/decompressor.h | 26 --
arch/s390/boot/kaslr.c | 6 -
arch/s390/boot/mem_detect.c | 54 +--
arch/s390/boot/startup.c | 21 +-
arch/s390/include/asm/ap.h | 12 +-
arch/s390/kernel/early.c | 1 -
arch/s390/kernel/head64.S | 1 +
arch/s390/kernel/idle.c | 2 +-
arch/s390/kernel/kprobes.c | 4 +-
arch/s390/kernel/vdso64/Makefile | 2 +-
arch/s390/kernel/vmlinux.lds.S | 1 +
arch/s390/kvm/kvm-s390.c | 43 +-
arch/s390/mm/dump_pagetables.c | 16 +-
arch/s390/mm/extmem.c | 12 +-
arch/s390/mm/fault.c | 49 ++-
arch/s390/mm/vmem.c | 6 +-
arch/s390/net/bpf_jit_comp.c | 12 +-
arch/sparc/Kconfig | 2 +-
arch/x86/crypto/ghash-clmulni-intel_glue.c | 6 +-
arch/x86/events/intel/ds.c | 35 +-
arch/x86/events/intel/uncore.c | 7 +
arch/x86/events/intel/uncore.h | 1 +
arch/x86/events/intel/uncore_snb.c | 161 ++++++++
arch/x86/events/zhaoxin/core.c | 8 +-
arch/x86/include/asm/fpu/sched.h | 2 +-
arch/x86/include/asm/fpu/xcr.h | 4 +-
arch/x86/include/asm/microcode.h | 4 +-
arch/x86/include/asm/microcode_amd.h | 4 +-
arch/x86/include/asm/msr-index.h | 4 +
arch/x86/include/asm/processor.h | 3 +-
arch/x86/include/asm/reboot.h | 2 +
arch/x86/include/asm/special_insns.h | 2 +-
arch/x86/include/asm/virtext.h | 16 +-
arch/x86/kernel/acpi/boot.c | 19 +-
arch/x86/kernel/cpu/bugs.c | 35 +-
arch/x86/kernel/cpu/common.c | 45 +-
arch/x86/kernel/cpu/microcode/amd.c | 53 +--
arch/x86/kernel/cpu/microcode/core.c | 26 +-
arch/x86/kernel/crash.c | 17 +-
arch/x86/kernel/fpu/context.h | 2 +-
arch/x86/kernel/fpu/core.c | 6 +-
arch/x86/kernel/kprobes/opt.c | 6 +-
arch/x86/kernel/reboot.c | 88 ++--
arch/x86/kernel/signal.c | 2 +-
arch/x86/kernel/smp.c | 6 +-
arch/x86/kvm/lapic.c | 38 +-
arch/x86/kvm/svm/avic.c | 53 +--
arch/x86/kvm/svm/sev.c | 4 +-
arch/x86/kvm/svm/svm.c | 2 +-
arch/x86/kvm/svm/svm.h | 2 +-
arch/x86/kvm/svm/svm_onhyperv.h | 4 +-
arch/x86/kvm/vmx/evmcs.h | 11 -
arch/x86/kvm/vmx/vmx.c | 9 +-
block/bio-integrity.c | 1 +
block/bio.c | 1 +
block/blk-cgroup.c | 39 +-
block/blk-core.c | 33 +-
block/blk-iocost.c | 11 +-
block/blk-merge.c | 35 +-
block/blk-mq-sched.c | 7 +-
block/blk-mq.c | 15 +-
block/fops.c | 21 +-
crypto/asymmetric_keys/public_key.c | 24 +-
crypto/essiv.c | 7 +-
crypto/rsa-pkcs1pad.c | 34 +-
crypto/seqiv.c | 2 +-
crypto/xts.c | 8 +-
drivers/acpi/acpica/Makefile | 2 +-
drivers/acpi/acpica/hwvalid.c | 7 +-
drivers/acpi/acpica/nsrepair.c | 12 +-
drivers/acpi/battery.c | 2 +-
drivers/acpi/resource.c | 26 +-
drivers/acpi/video_detect.c | 2 +-
drivers/ata/ahci.c | 1 -
drivers/base/core.c | 452 ++++++++++++++-------
drivers/base/physical_location.c | 5 +-
drivers/base/power/domain.c | 5 +-
drivers/base/regmap/regmap.c | 6 +
drivers/base/transport_class.c | 17 +-
drivers/block/brd.c | 67 +--
drivers/block/rbd.c | 20 +-
drivers/block/ublk_drv.c | 23 +-
drivers/bluetooth/btusb.c | 16 +
drivers/bluetooth/hci_qca.c | 7 +-
drivers/bus/mhi/ep/main.c | 35 +-
drivers/char/applicom.c | 5 +-
drivers/char/ipmi/ipmi_ipmb.c | 2 +-
drivers/char/ipmi/ipmi_ssif.c | 74 ++--
drivers/char/pcmcia/cm4000_cs.c | 6 +-
drivers/clocksource/timer-riscv.c | 10 +-
drivers/cpufreq/davinci-cpufreq.c | 4 +-
drivers/cpuidle/Kconfig.arm | 2 +
drivers/crypto/amcc/crypto4xx_core.c | 10 +-
drivers/crypto/ccp/ccp-dmaengine.c | 21 +-
drivers/crypto/ccp/sev-dev.c | 15 +-
drivers/crypto/hisilicon/sgl.c | 3 +-
drivers/crypto/marvell/octeontx2/Makefile | 11 +-
drivers/crypto/marvell/octeontx2/cn10k_cpt.c | 9 +-
drivers/crypto/marvell/octeontx2/cn10k_cpt.h | 2 -
drivers/crypto/marvell/octeontx2/otx2_cpt_common.h | 2 -
.../marvell/octeontx2/otx2_cpt_mbox_common.c | 14 +-
drivers/crypto/marvell/octeontx2/otx2_cptlf.c | 11 +
drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c | 2 +
drivers/crypto/marvell/octeontx2/otx2_cptvf_main.c | 2 +
drivers/crypto/qat/qat_common/qat_algs.c | 2 +-
drivers/cxl/pmem.c | 1 +
drivers/dax/bus.c | 2 +-
drivers/dax/kmem.c | 4 +-
drivers/dma/Kconfig | 2 +-
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 2 -
drivers/dma/dw-edma/dw-edma-core.c | 4 +
drivers/dma/dw-edma/dw-edma-v0-core.c | 2 +-
drivers/dma/idxd/device.c | 2 +-
drivers/dma/idxd/init.c | 2 +-
drivers/dma/idxd/sysfs.c | 4 +-
drivers/dma/ptdma/ptdma-dmaengine.c | 2 +-
drivers/dma/sf-pdma/sf-pdma.c | 3 +-
drivers/dma/sf-pdma/sf-pdma.h | 1 -
drivers/firmware/dmi-sysfs.c | 10 +-
drivers/firmware/google/framebuffer-coreboot.c | 4 +-
drivers/firmware/psci/psci.c | 31 +-
drivers/firmware/stratix10-svc.c | 25 +-
drivers/fpga/microchip-spi.c | 123 +++---
drivers/gpio/gpio-vf610.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 12 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 4 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h | 4 +-
drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c | 5 +
drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 9 +-
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 8 +-
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c | 7 +
.../drm/amd/display/dc/clk_mgr/dcn314/dcn314_smu.c | 3 +
drivers/gpu/drm/amd/display/dc/core/dc.c | 16 +
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 6 -
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 14 +-
drivers/gpu/drm/amd/display/dc/dc_dp_types.h | 1 -
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h | 3 +-
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c | 9 +
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h | 2 +
.../display/dc/dcn314/dcn314_dio_stream_encoder.c | 6 +-
.../drm/amd/display/dc/dcn314/dcn314_resource.c | 4 +-
.../amd/display/dc/dml/dcn20/display_mode_vba_20.c | 8 +-
.../display/dc/dml/dcn20/display_mode_vba_20v2.c | 10 +-
.../amd/display/dc/dml/dcn21/display_mode_vba_21.c | 12 +-
.../gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 4 +
.../gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c | 2 +-
.../amd/display/dc/gpio/dcn20/hw_factory_dcn20.c | 6 +-
.../amd/display/dc/gpio/dcn30/hw_factory_dcn30.c | 6 +-
.../amd/display/dc/gpio/dcn32/hw_factory_dcn32.c | 6 +-
drivers/gpu/drm/amd/display/dc/gpio/ddc_regs.h | 7 +
.../drm/amd/display/dc/inc/hw/timing_generator.h | 1 +
drivers/gpu/drm/bridge/lontium-lt9611.c | 65 +--
.../drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 6 +-
drivers/gpu/drm/bridge/tc358767.c | 8 +-
drivers/gpu/drm/bridge/ti-sn65dsi83.c | 2 +-
drivers/gpu/drm/drm_edid.c | 43 +-
drivers/gpu/drm/drm_fourcc.c | 4 +
drivers/gpu/drm/drm_gem_shmem_helper.c | 52 ++-
drivers/gpu/drm/drm_mipi_dsi.c | 52 +++
drivers/gpu/drm/drm_mode_config.c | 8 +-
drivers/gpu/drm/drm_panel_orientation_quirks.c | 39 +-
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 8 +-
drivers/gpu/drm/gud/gud_pipe.c | 4 +-
drivers/gpu/drm/i915/display/intel_quirks.c | 2 +
drivers/gpu/drm/i915/gt/intel_ring.c | 6 +-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 2 +
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 1 +
drivers/gpu/drm/mediatek/mtk_drm_gem.c | 4 +-
drivers/gpu/drm/mediatek/mtk_dsi.c | 2 +-
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 4 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 7 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 5 +
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 15 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 5 +
drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c | 2 +
drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c | 5 +-
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 4 +-
drivers/gpu/drm/msm/dsi/dsi_host.c | 3 +
drivers/gpu/drm/msm/hdmi/hdmi.c | 4 +
drivers/gpu/drm/msm/msm_drv.c | 2 +-
drivers/gpu/drm/msm/msm_fence.c | 2 +-
drivers/gpu/drm/msm/msm_gem_submit.c | 4 +
drivers/gpu/drm/mxsfb/Kconfig | 2 +
drivers/gpu/drm/omapdrm/dss/dsi.c | 26 +-
drivers/gpu/drm/panel/panel-edp.c | 2 +-
drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 4 +-
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 3 +-
drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c | 2 -
drivers/gpu/drm/radeon/atombios_encoders.c | 5 +-
drivers/gpu/drm/radeon/radeon_device.c | 1 +
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 31 +-
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 49 +++
drivers/gpu/drm/rcar-du/rcar_du_drv.h | 2 +
drivers/gpu/drm/rcar-du/rcar_du_regs.h | 8 +-
drivers/gpu/drm/tegra/firewall.c | 3 +
drivers/gpu/drm/tidss/tidss_dispc.c | 4 +-
drivers/gpu/drm/tiny/ili9486.c | 13 +-
drivers/gpu/drm/vc4/vc4_dpi.c | 2 +-
drivers/gpu/drm/vc4/vc4_hdmi.c | 16 +-
drivers/gpu/drm/vc4/vc4_hvs.c | 73 +++-
drivers/gpu/drm/vc4/vc4_plane.c | 2 +
drivers/gpu/drm/vc4/vc4_regs.h | 17 +-
drivers/gpu/drm/vkms/vkms_drv.c | 10 +-
drivers/gpu/host1x/hw/hw_host1x06_uclass.h | 2 +-
drivers/gpu/host1x/hw/hw_host1x07_uclass.h | 2 +-
drivers/gpu/host1x/hw/hw_host1x08_uclass.h | 2 +-
drivers/gpu/host1x/hw/syncpt_hw.c | 3 -
drivers/gpu/ipu-v3/ipu-common.c | 1 +
drivers/hid/hid-asus.c | 37 +-
drivers/hid/hid-bigbenff.c | 75 +++-
drivers/hid/hid-debug.c | 1 +
drivers/hid/hid-ids.h | 2 +
drivers/hid/hid-input.c | 12 +
drivers/hid/hid-logitech-hidpp.c | 49 ++-
drivers/hid/hid-multitouch.c | 39 +-
drivers/hid/hid-quirks.c | 2 +-
drivers/hid/hid-uclogic-core.c | 26 +-
drivers/hid/hid-uclogic-params.c | 14 +
drivers/hid/hid-uclogic-params.h | 24 ++
drivers/hid/i2c-hid/i2c-hid-core.c | 6 +-
drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 42 ++
drivers/hid/i2c-hid/i2c-hid.h | 3 +
drivers/hwmon/Kconfig | 2 +-
drivers/hwmon/asus-ec-sensors.c | 1 +
drivers/hwmon/coretemp.c | 128 +++---
drivers/hwmon/ftsteutates.c | 19 +-
drivers/hwmon/ltc2945.c | 2 +
drivers/hwmon/mlxreg-fan.c | 6 +
drivers/hwmon/nct6775-core.c | 2 +-
drivers/hwmon/nct6775-platform.c | 150 +++++--
drivers/hwmon/peci/cputemp.c | 2 +-
drivers/hwtracing/coresight/coresight-cti-core.c | 11 +-
drivers/hwtracing/coresight/coresight-cti-sysfs.c | 13 +-
drivers/hwtracing/coresight/coresight-etm4x-core.c | 18 +-
drivers/hwtracing/ptt/hisi_ptt.c | 10 +
drivers/i2c/busses/i2c-designware-common.c | 2 +-
drivers/i2c/busses/i2c-designware-core.h | 2 +-
drivers/idle/intel_idle.c | 8 +-
drivers/iio/light/tsl2563.c | 8 +-
drivers/infiniband/hw/cxgb4/cm.c | 7 +
drivers/infiniband/hw/cxgb4/restrack.c | 2 +-
drivers/infiniband/hw/erdma/erdma_verbs.c | 4 +-
drivers/infiniband/hw/hfi1/sdma.c | 4 +-
drivers/infiniband/hw/hfi1/sdma.h | 15 +-
drivers/infiniband/hw/hfi1/user_pages.c | 61 ++-
drivers/infiniband/hw/hns/hns_roce_main.c | 5 +-
drivers/infiniband/hw/irdma/hw.c | 2 +
drivers/infiniband/sw/rxe/rxe_queue.h | 108 +++--
drivers/infiniband/sw/rxe/rxe_verbs.c | 100 ++---
drivers/infiniband/sw/siw/siw_mem.c | 23 +-
drivers/iommu/amd/init.c | 16 +-
drivers/iommu/amd/iommu.c | 22 +-
drivers/iommu/apple-dart.c | 204 +++++++---
drivers/iommu/intel/iommu.c | 26 +-
drivers/iommu/intel/pasid.c | 18 +
drivers/iommu/iommu.c | 8 +-
drivers/irqchip/irq-alpine-msi.c | 1 +
drivers/irqchip/irq-bcm7120-l2.c | 3 +-
drivers/irqchip/irq-brcmstb-l2.c | 6 +-
drivers/irqchip/irq-mvebu-gicp.c | 1 +
drivers/irqchip/irq-ti-sci-intr.c | 1 +
drivers/irqchip/irqchip.c | 8 +-
drivers/leds/led-class.c | 6 +-
drivers/leds/leds-is31fl319x.c | 7 +-
drivers/leds/simple/simatic-ipc-leds-gpio.c | 2 +
drivers/md/dm-bufio.c | 2 +-
drivers/md/dm-cache-background-tracker.c | 8 +
drivers/md/dm-cache-target.c | 4 +
drivers/md/dm-flakey.c | 31 +-
drivers/md/dm-ioctl.c | 13 +-
drivers/md/dm-thin.c | 2 +
drivers/md/dm-zoned-metadata.c | 2 +-
drivers/md/dm.c | 30 +-
drivers/md/dm.h | 2 +-
drivers/md/md.c | 2 +-
drivers/media/i2c/imx219.c | 255 +++++-------
drivers/media/i2c/max9286.c | 1 +
drivers/media/i2c/ov2740.c | 4 +-
drivers/media/i2c/ov5640.c | 56 ++-
drivers/media/i2c/ov5675.c | 4 +-
drivers/media/i2c/ov7670.c | 2 +-
drivers/media/i2c/ov772x.c | 3 +-
drivers/media/mc/mc-entity.c | 8 +-
drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 3 +
drivers/media/pci/saa7134/saa7134-core.c | 2 +-
drivers/media/platform/amphion/vpu_color.c | 6 +-
drivers/media/platform/mediatek/mdp3/Kconfig | 8 +-
.../media/platform/mediatek/mdp3/mtk-mdp3-core.c | 7 +-
drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c | 35 +-
drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h | 4 +-
.../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 3 +-
drivers/media/platform/ti/cal/cal.c | 4 +-
drivers/media/platform/ti/omap3isp/isp.c | 9 +
drivers/media/platform/verisilicon/hantro_v4l2.c | 7 +-
drivers/media/rc/ene_ir.c | 3 +-
drivers/media/usb/siano/smsusb.c | 1 +
drivers/media/usb/uvc/uvc_ctrl.c | 154 +++++--
drivers/media/usb/uvc/uvc_driver.c | 18 +-
drivers/media/usb/uvc/uvc_v4l2.c | 6 +-
drivers/media/usb/uvc/uvcvideo.h | 6 +-
drivers/media/v4l2-core/v4l2-h264.c | 4 +
drivers/media/v4l2-core/v4l2-jpeg.c | 4 +-
drivers/mfd/Kconfig | 1 +
drivers/mfd/pcf50633-adc.c | 7 +-
drivers/misc/eeprom/idt_89hpesx.c | 10 +-
drivers/misc/fastrpc.c | 13 +-
.../misc/habanalabs/common/command_submission.c | 33 +-
drivers/misc/habanalabs/common/device.c | 38 +-
drivers/misc/habanalabs/common/memory.c | 5 +-
drivers/misc/mei/hdcp/mei_hdcp.c | 4 +-
drivers/misc/mei/pxp/mei_pxp.c | 4 +-
drivers/misc/vmw_vmci/vmci_host.c | 2 +
drivers/mtd/mtdpart.c | 10 +
drivers/mtd/spi-nor/core.c | 9 +
drivers/mtd/spi-nor/core.h | 1 +
drivers/mtd/spi-nor/sfdp.c | 6 +-
drivers/mtd/spi-nor/spansion.c | 9 +-
drivers/net/can/rcar/rcar_canfd.c | 4 +-
drivers/net/can/usb/esd_usb.c | 52 +--
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 +
drivers/net/ethernet/broadcom/genet/bcmmii.c | 11 +-
drivers/net/ethernet/intel/ice/ice_main.c | 17 +-
drivers/net/ethernet/intel/ice/ice_ptp.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/en_tx.c | 22 +-
.../ethernet/mellanox/mlx5/core/diag/fw_tracer.c | 2 +-
.../net/ethernet/mellanox/mlx5/core/pagealloc.c | 3 +-
.../net/ethernet/microchip/lan966x/lan966x_ptp.c | 4 +-
drivers/net/ethernet/qlogic/qede/qede_main.c | 11 +-
drivers/net/hyperv/netvsc.c | 18 +
drivers/net/ipa/gsi.c | 3 +-
drivers/net/ipa/gsi_reg.h | 1 -
drivers/net/tap.c | 2 +-
drivers/net/tun.c | 2 +-
drivers/net/wireless/ath/ath11k/core.h | 1 -
drivers/net/wireless/ath/ath11k/debugfs.c | 48 ++-
drivers/net/wireless/ath/ath11k/dp_rx.c | 2 +
drivers/net/wireless/ath/ath11k/pci.c | 2 +-
drivers/net/wireless/ath/ath9k/hif_usb.c | 33 +-
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 2 +
drivers/net/wireless/ath/ath9k/htc_hst.c | 4 +-
drivers/net/wireless/ath/ath9k/wmi.c | 1 +
.../wireless/broadcom/brcm80211/brcmfmac/common.c | 7 +-
.../wireless/broadcom/brcm80211/brcmfmac/core.c | 1 +
.../wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 5 +-
drivers/net/wireless/intel/ipw2x00/ipw2200.c | 11 +-
drivers/net/wireless/intel/iwlegacy/3945-mac.c | 16 +-
drivers/net/wireless/intel/iwlegacy/4965-mac.c | 12 +-
drivers/net/wireless/intel/iwlegacy/common.c | 4 +-
drivers/net/wireless/intel/iwlwifi/mei/main.c | 6 +-
drivers/net/wireless/intersil/orinoco/hw.c | 2 +
drivers/net/wireless/marvell/libertas/cmdresp.c | 2 +-
drivers/net/wireless/marvell/libertas/if_usb.c | 2 +-
drivers/net/wireless/marvell/libertas/main.c | 3 +-
drivers/net/wireless/marvell/libertas_tf/if_usb.c | 2 +-
drivers/net/wireless/marvell/mwifiex/11n.c | 6 +-
drivers/net/wireless/mediatek/mt76/dma.c | 13 +-
.../net/wireless/mediatek/mt76/mt76_connac_mac.c | 2 +-
.../net/wireless/mediatek/mt76/mt7915/debugfs.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c | 19 +-
drivers/net/wireless/mediatek/mt76/mt7915/init.c | 3 +-
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 3 -
drivers/net/wireless/mediatek/mt76/mt7915/main.c | 6 +
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 13 +-
drivers/net/wireless/mediatek/mt76/mt7915/mmio.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7915/regs.h | 1 -
drivers/net/wireless/mediatek/mt76/mt7915/soc.c | 1 +
.../net/wireless/mediatek/mt76/mt7921/acpi_sar.c | 7 +-
drivers/net/wireless/mediatek/mt76/sdio.c | 4 +
drivers/net/wireless/mediatek/mt76/sdio_txrx.c | 4 +
drivers/net/wireless/mediatek/mt7601u/dma.c | 3 +-
drivers/net/wireless/microchip/wilc1000/netdev.c | 8 +-
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 5 +
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 19 +-
.../net/wireless/realtek/rtlwifi/rtl8188ee/hw.c | 6 +-
.../net/wireless/realtek/rtlwifi/rtl8723be/hw.c | 6 +-
.../net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 6 +-
.../net/wireless/realtek/rtlwifi/rtl8821ae/phy.c | 52 +--
drivers/net/wireless/realtek/rtw88/coex.c | 2 +-
drivers/net/wireless/realtek/rtw88/mac.c | 10 +
drivers/net/wireless/realtek/rtw88/main.h | 2 +-
drivers/net/wireless/realtek/rtw88/ps.c | 4 +-
drivers/net/wireless/realtek/rtw88/wow.c | 2 +-
drivers/net/wireless/realtek/rtw89/core.c | 3 +
drivers/net/wireless/realtek/rtw89/debug.c | 7 +
drivers/net/wireless/realtek/rtw89/fw.c | 4 +-
drivers/net/wireless/realtek/rtw89/reg.h | 2 +
drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c | 11 +-
drivers/net/wireless/rsi/rsi_91x_coex.c | 1 +
drivers/net/wireless/wl3501_cs.c | 2 +-
drivers/nvdimm/bus.c | 19 +-
drivers/nvdimm/dimm_devs.c | 5 +-
drivers/nvdimm/nd-core.h | 1 +
drivers/opp/debugfs.c | 2 +-
drivers/pci/controller/dwc/pcie-qcom.c | 13 +-
drivers/pci/controller/pcie-mt7621.c | 2 +
drivers/pci/endpoint/functions/pci-epf-vntb.c | 84 ++--
drivers/pci/iov.c | 2 +-
drivers/pci/pci-driver.c | 2 +-
drivers/pci/pci.c | 59 ++-
drivers/pci/pci.h | 59 ++-
drivers/pci/pcie/dpc.c | 4 +-
drivers/pci/probe.c | 2 +-
drivers/pci/quirks.c | 1 +
drivers/pci/switch/switchtec.c | 9 +-
drivers/phy/mediatek/phy-mtk-io.h | 4 +-
drivers/phy/rockchip/phy-rockchip-typec.c | 4 +-
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 2 -
drivers/pinctrl/mediatek/pinctrl-paris.c | 4 +-
drivers/pinctrl/pinctrl-at91-pio4.c | 4 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/pinctrl/pinctrl-rockchip.c | 1 +
drivers/pinctrl/qcom/pinctrl-msm8976.c | 8 +-
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 17 +-
drivers/pinctrl/stm32/pinctrl-stm32.c | 1 +
drivers/platform/chrome/cros_ec_typec.c | 2 +-
drivers/power/supply/power_supply_core.c | 93 -----
drivers/powercap/powercap_sys.c | 14 +-
drivers/regulator/core.c | 6 +-
drivers/regulator/max77802-regulator.c | 34 +-
drivers/regulator/s5m8767.c | 6 +-
drivers/regulator/tps65219-regulator.c | 22 +-
drivers/remoteproc/mtk_scp_ipi.c | 11 +-
drivers/remoteproc/qcom_q6v5_mss.c | 87 ++--
drivers/rpmsg/qcom_glink_native.c | 3 +
drivers/rtc/rtc-pm8xxx.c | 24 +-
drivers/s390/block/dasd_eckd.c | 4 +-
drivers/s390/char/sclp_early.c | 2 +-
drivers/s390/crypto/vfio_ap_ops.c | 12 +-
drivers/scsi/aacraid/aachba.c | 5 +-
drivers/scsi/aic94xx/aic94xx_task.c | 3 +
drivers/scsi/hosts.c | 2 +
drivers/scsi/lpfc/lpfc_sli.c | 19 +-
drivers/scsi/mpi3mr/mpi3mr_app.c | 28 +-
drivers/scsi/mpi3mr/mpi3mr_os.c | 4 +
drivers/scsi/mpt3sas/mpt3sas_base.c | 6 +-
drivers/scsi/qla2xxx/qla_bsg.c | 9 +-
drivers/scsi/qla2xxx/qla_def.h | 6 +-
drivers/scsi/qla2xxx/qla_dfs.c | 10 +-
drivers/scsi/qla2xxx/qla_edif.c | 11 +-
drivers/scsi/qla2xxx/qla_edif_bsg.h | 15 +-
drivers/scsi/qla2xxx/qla_init.c | 14 +-
drivers/scsi/qla2xxx/qla_inline.h | 55 ++-
drivers/scsi/qla2xxx/qla_iocb.c | 95 ++++-
drivers/scsi/qla2xxx/qla_isr.c | 6 +-
drivers/scsi/qla2xxx/qla_nvme.c | 34 +-
drivers/scsi/qla2xxx/qla_os.c | 9 +-
drivers/scsi/ses.c | 64 ++-
drivers/scsi/snic/snic_debugfs.c | 4 +-
drivers/soundwire/cadence_master.c | 3 +-
drivers/spi/Kconfig | 1 -
drivers/spi/spi-bcm63xx-hsspi.c | 14 +-
drivers/spi/spi-synquacer.c | 7 +-
drivers/staging/media/atomisp/pci/atomisp_fops.c | 4 +-
drivers/staging/media/imx/imx7-media-csi.c | 4 +-
drivers/thermal/hisi_thermal.c | 4 -
drivers/thermal/imx_sc_thermal.c | 10 +-
drivers/thermal/intel/intel_pch_thermal.c | 8 +
drivers/thermal/intel/intel_powerclamp.c | 20 +-
drivers/thermal/intel/intel_soc_dts_iosf.c | 2 +-
drivers/thermal/qcom/tsens-v0_1.c | 28 +-
drivers/thermal/qcom/tsens-v1.c | 61 ++-
drivers/thermal/qcom/tsens.c | 3 +
drivers/thermal/qcom/tsens.h | 2 +-
drivers/tty/serial/fsl_lpuart.c | 19 +-
drivers/tty/serial/imx.c | 69 +++-
drivers/tty/serial/qcom_geni_serial.c | 2 +
drivers/tty/serial/serial-tegra.c | 7 +-
drivers/ufs/core/ufshcd.c | 20 +-
drivers/ufs/host/ufs-exynos.c | 2 +-
drivers/usb/early/xhci-dbc.c | 3 +-
drivers/usb/gadget/configfs.c | 6 +
drivers/usb/gadget/udc/fotg210-udc.c | 16 +
drivers/usb/gadget/udc/fusb300_udc.c | 10 +-
drivers/usb/host/fsl-mph-dr-of.c | 3 +-
drivers/usb/host/max3421-hcd.c | 2 +-
drivers/usb/musb/mediatek.c | 3 +-
drivers/usb/typec/mux/intel_pmc_mux.c | 4 +-
drivers/vfio/vfio_iommu_type1.c | 143 +++++--
drivers/video/fbdev/core/fbcon.c | 17 +-
drivers/virt/coco/sev-guest/sev-guest.c | 20 +-
drivers/xen/grant-dma-iommu.c | 11 +-
fs/btrfs/discard.c | 41 +-
fs/btrfs/scrub.c | 49 ++-
fs/ceph/file.c | 8 +
fs/cifs/cached_dir.c | 43 +-
fs/cifs/cifsacl.c | 34 +-
fs/cifs/cifssmb.c | 17 +-
fs/cifs/connect.c | 94 ++---
fs/cifs/dir.c | 19 +-
fs/cifs/file.c | 35 +-
fs/cifs/inode.c | 53 +--
fs/cifs/link.c | 66 +--
fs/cifs/smb1ops.c | 72 ++--
fs/cifs/smb2inode.c | 17 +-
fs/cifs/smb2ops.c | 204 +++++-----
fs/cifs/smb2pdu.c | 212 ++++++----
fs/cifs/smbdirect.c | 4 +-
fs/coda/upcall.c | 2 +-
fs/cramfs/inode.c | 2 +-
fs/dlm/midcomms.c | 45 +-
fs/erofs/fscache.c | 2 +-
fs/exfat/dir.c | 7 +-
fs/exfat/exfat_fs.h | 2 +-
fs/exfat/file.c | 3 +-
fs/exfat/inode.c | 6 +-
fs/exfat/namei.c | 2 +-
fs/exfat/super.c | 3 +-
fs/ext4/namei.c | 11 +-
fs/ext4/xattr.c | 35 +-
fs/f2fs/data.c | 10 +-
fs/f2fs/inline.c | 13 +-
fs/f2fs/inode.c | 13 +-
fs/fuse/ioctl.c | 6 +
fs/gfs2/aops.c | 3 +-
fs/gfs2/super.c | 8 +-
fs/hfs/bnode.c | 1 +
fs/hfsplus/super.c | 4 +-
fs/jbd2/transaction.c | 50 ++-
fs/ksmbd/smb2misc.c | 31 +-
fs/ksmbd/smb2pdu.c | 28 +-
fs/ksmbd/vfs_cache.c | 5 +-
fs/nfs/nfs4proc.c | 4 +-
fs/nfs/nfs4trace.h | 42 +-
fs/nfsd/filecache.c | 44 +-
fs/nfsd/nfs4layouts.c | 4 +-
fs/nfsd/nfs4proc.c | 160 ++++----
fs/nfsd/nfs4state.c | 53 ++-
fs/nfsd/nfssvc.c | 2 +-
fs/nfsd/trace.h | 31 --
fs/nfsd/xdr4.h | 2 +-
fs/ocfs2/move_extents.c | 34 +-
fs/open.c | 5 +-
fs/super.c | 21 +-
fs/udf/file.c | 26 +-
fs/udf/inode.c | 74 ++--
fs/udf/super.c | 1 +
fs/udf/udf_i.h | 3 +-
fs/udf/udf_sb.h | 2 +
include/drm/drm_mipi_dsi.h | 4 +
include/drm/drm_print.h | 2 +-
include/linux/blkdev.h | 1 +
include/linux/bpf.h | 7 +
include/linux/context_tracking.h | 27 ++
include/linux/device.h | 1 +
include/linux/fwnode.h | 12 +-
include/linux/hid.h | 1 +
include/linux/ima.h | 6 +-
include/linux/kernel_stat.h | 2 +-
include/linux/kobject.h | 2 +-
include/linux/kprobes.h | 2 +
include/linux/libnvdimm.h | 3 +
include/linux/mlx4/qp.h | 1 +
include/linux/nfs_ssc.h | 2 +-
include/linux/poison.h | 3 +
include/linux/rcupdate.h | 11 +-
include/linux/rmap.h | 2 +-
include/linux/sbitmap.h | 16 +-
include/linux/transport_class.h | 8 +-
include/linux/uaccess.h | 4 +
include/net/sock.h | 7 +-
include/sound/hda_codec.h | 1 +
include/sound/soc-dapm.h | 1 +
include/trace/events/devlink.h | 2 +-
include/uapi/linux/io_uring.h | 2 +-
include/uapi/linux/vfio.h | 15 +-
include/ufs/ufshcd.h | 4 +-
io_uring/io_uring.c | 13 +-
io_uring/io_uring.h | 10 +
io_uring/net.c | 2 +-
io_uring/rsrc.c | 13 +-
kernel/bpf/btf.c | 13 +-
kernel/bpf/hashtab.c | 4 +-
kernel/bpf/memalloc.c | 2 +-
kernel/context_tracking.c | 12 +-
kernel/exit.c | 7 +
kernel/irq/irqdomain.c | 283 ++++++++-----
kernel/kprobes.c | 27 +-
kernel/locking/lockdep.c | 3 +
kernel/locking/rwsem.c | 49 ++-
kernel/panic.c | 49 ++-
kernel/pid_namespace.c | 17 +
kernel/power/energy_model.c | 5 +-
kernel/rcu/srcutree.c | 9 +-
kernel/rcu/tasks.h | 77 ++--
kernel/rcu/tree_exp.h | 2 +
kernel/resource.c | 14 -
kernel/sched/rt.c | 5 +-
kernel/time/clocksource.c | 45 +-
kernel/time/hrtimer.c | 2 +
kernel/time/posix-stubs.c | 2 +
kernel/time/posix-timers.c | 2 +
kernel/time/test_udelay.c | 2 +-
kernel/torture.c | 2 +-
kernel/trace/blktrace.c | 4 +-
kernel/trace/ring_buffer.c | 42 +-
kernel/trace/trace.c | 2 +-
kernel/workqueue.c | 41 +-
lib/bug.c | 15 +-
lib/errname.c | 22 +-
lib/kobject.c | 20 +-
lib/mpi/mpicoder.c | 3 +-
lib/sbitmap.c | 135 ++----
mm/damon/paddr.c | 7 +-
mm/huge_memory.c | 3 +
mm/memcontrol.c | 4 +
mm/memory-failure.c | 8 +-
mm/memory-tiers.c | 4 +-
mm/rmap.c | 2 +-
net/bluetooth/hci_conn.c | 12 +-
net/bluetooth/l2cap_core.c | 24 --
net/bluetooth/l2cap_sock.c | 8 +
net/can/isotp.c | 3 +
net/core/scm.c | 2 +
net/core/sock.c | 15 +-
net/ipv4/inet_hashtables.c | 12 +-
net/l2tp/l2tp_ppp.c | 125 +++---
net/mac80211/cfg.c | 26 +-
net/mac80211/ieee80211_i.h | 3 +
net/mac80211/link.c | 3 +
net/mac80211/rx.c | 32 +-
net/mac80211/sta_info.c | 2 +-
net/mac80211/tx.c | 2 +-
net/netfilter/nf_tables_api.c | 3 +
net/rds/message.c | 2 +-
net/smc/af_smc.c | 2 +
net/smc/smc_core.c | 17 +-
net/sunrpc/clnt.c | 2 +
net/wireless/nl80211.c | 2 +-
net/wireless/sme.c | 48 ++-
net/xdp/xsk.c | 59 +--
scripts/gcc-plugins/Makefile | 2 +-
scripts/package/mkdebian | 2 +-
security/integrity/ima/ima_api.c | 2 +-
security/integrity/ima/ima_main.c | 9 +-
security/security.c | 7 +-
sound/pci/hda/Kconfig | 14 +
sound/pci/hda/hda_codec.c | 13 +-
sound/pci/hda/hda_controller.c | 1 +
sound/pci/hda/hda_controller.h | 1 +
sound/pci/hda/hda_intel.c | 8 +-
sound/pci/hda/patch_ca0132.c | 2 +-
sound/pci/hda/patch_realtek.c | 1 +
sound/pci/ice1712/aureon.c | 2 +-
sound/soc/atmel/mchp-spdifrx.c | 342 ++++++++++------
sound/soc/codecs/lpass-rx-macro.c | 12 +-
sound/soc/codecs/lpass-tx-macro.c | 12 +-
sound/soc/codecs/lpass-va-macro.c | 20 +-
sound/soc/codecs/lpass-wsa-macro.c | 9 +-
sound/soc/codecs/tlv320adcx140.c | 2 +-
sound/soc/fsl/fsl_sai.c | 1 +
sound/soc/kirkwood/kirkwood-dma.c | 2 +-
sound/soc/qcom/qdsp6/q6apm-dai.c | 22 +-
sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 5 +
sound/soc/sh/rcar/rsnd.h | 4 +-
sound/soc/soc-compress.c | 11 +-
sound/soc/soc-topology.c | 2 +-
tools/bootconfig/scripts/ftrace2bconf.sh | 2 +-
tools/bpf/bpftool/Makefile | 3 +-
tools/bpf/bpftool/prog.c | 38 +-
tools/lib/bpf/bpf_tracing.h | 2 +-
tools/lib/bpf/btf.c | 13 +
tools/lib/bpf/nlattr.c | 2 +-
tools/lib/thermal/sampling.c | 2 +-
tools/objtool/check.c | 2 +
tools/perf/Documentation/perf-intel-pt.txt | 30 ++
tools/perf/builtin-inject.c | 6 +-
tools/perf/builtin-record.c | 16 +-
tools/perf/perf-completion.sh | 11 +-
tools/perf/tests/bpf.c | 6 +-
tools/perf/tests/shell/stat_all_metrics.sh | 2 +-
tools/perf/util/auxtrace.c | 3 +
tools/perf/util/intel-pt.c | 6 +
tools/perf/util/llvm-utils.c | 25 +-
tools/power/x86/intel-speed-select/isst-config.c | 2 +-
tools/testing/ktest/ktest.pl | 26 +-
tools/testing/ktest/sample.conf | 5 +
tools/testing/selftests/Makefile | 4 +-
tools/testing/selftests/arm64/abi/syscall-abi.c | 8 +
tools/testing/selftests/arm64/fp/Makefile | 2 +-
.../selftests/arm64/signal/testcases/ssve_regs.c | 4 +
.../selftests/arm64/signal/testcases/za_regs.c | 4 +
tools/testing/selftests/arm64/tags/Makefile | 2 +-
tools/testing/selftests/bpf/Makefile | 14 +-
.../selftests/bpf/prog_tests/xdp_do_redirect.c | 4 +
tools/testing/selftests/bpf/progs/map_kptr.c | 12 +-
tools/testing/selftests/bpf/progs/test_bpf_nf.c | 11 +-
tools/testing/selftests/bpf/xdp_synproxy.c | 1 +
tools/testing/selftests/bpf/xskxceiver.c | 22 +-
tools/testing/selftests/clone3/Makefile | 2 +-
tools/testing/selftests/core/Makefile | 2 +-
tools/testing/selftests/dmabuf-heaps/Makefile | 2 +-
tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c | 3 +-
tools/testing/selftests/drivers/dma-buf/Makefile | 2 +-
.../selftests/drivers/net/netdevsim/devlink.sh | 18 +
.../selftests/drivers/s390x/uvdevice/Makefile | 3 +-
tools/testing/selftests/filesystems/Makefile | 2 +-
.../selftests/filesystems/binderfs/Makefile | 2 +-
tools/testing/selftests/filesystems/epoll/Makefile | 2 +-
.../test.d/dynevent/eprobes_syntax_errors.tc | 4 +-
.../ftrace/test.d/ftrace/func_event_triggers.tc | 2 +-
tools/testing/selftests/futex/functional/Makefile | 2 +-
tools/testing/selftests/gpio/Makefile | 2 +-
tools/testing/selftests/ipc/Makefile | 2 +-
tools/testing/selftests/kcmp/Makefile | 2 +-
tools/testing/selftests/landlock/fs_test.c | 47 +++
tools/testing/selftests/landlock/ptrace_test.c | 113 +++++-
tools/testing/selftests/media_tests/Makefile | 2 +-
tools/testing/selftests/membarrier/Makefile | 2 +-
tools/testing/selftests/mount_setattr/Makefile | 2 +-
.../selftests/move_mount_set_group/Makefile | 2 +-
tools/testing/selftests/net/fib_tests.sh | 2 +
tools/testing/selftests/net/udpgso_bench_rx.c | 6 +-
tools/testing/selftests/perf_events/Makefile | 2 +-
tools/testing/selftests/pid_namespace/Makefile | 2 +-
tools/testing/selftests/pidfd/Makefile | 2 +-
tools/testing/selftests/powerpc/ptrace/Makefile | 2 +-
tools/testing/selftests/powerpc/security/Makefile | 2 +-
tools/testing/selftests/powerpc/syscalls/Makefile | 2 +-
tools/testing/selftests/powerpc/tm/Makefile | 2 +-
tools/testing/selftests/ptp/Makefile | 2 +-
tools/testing/selftests/rseq/Makefile | 2 +-
tools/testing/selftests/sched/Makefile | 2 +-
tools/testing/selftests/seccomp/Makefile | 2 +-
tools/testing/selftests/sync/Makefile | 2 +-
tools/testing/selftests/user_events/Makefile | 2 +-
tools/testing/selftests/vm/Makefile | 2 +-
tools/testing/selftests/x86/Makefile | 2 +-
tools/tracing/rtla/src/osnoise_hist.c | 5 +-
virt/kvm/coalesced_mmio.c | 8 +-
virt/kvm/kvm_main.c | 31 +-
844 files changed, 8124 insertions(+), 4745 deletions(-)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 001/885] HID: asus: use spinlock to protect concurrent accesses
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
@ 2023-03-07 16:48 ` Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 002/885] HID: asus: use spinlock to safely schedule workers Greg Kroah-Hartman
` (886 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:48 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pietro Borrello, Benjamin Tissoires,
Stefan Ghinea
From: Pietro Borrello <borrello@diag.uniroma1.it>
commit 315c537068a13f0b5681d33dd045a912f4bece6f upstream.
asus driver has a worker that may access data concurrently.
Proct the accesses using a spinlock.
Fixes: af22a610bc38 ("HID: asus: support backlight on USB keyboards")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-4-7860c5763c38@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Stefan Ghinea <stefan.ghinea@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/hid-asus.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -98,6 +98,7 @@ struct asus_kbd_leds {
struct hid_device *hdev;
struct work_struct work;
unsigned int brightness;
+ spinlock_t lock;
bool removed;
};
@@ -495,7 +496,12 @@ static void asus_kbd_backlight_set(struc
{
struct asus_kbd_leds *led = container_of(led_cdev, struct asus_kbd_leds,
cdev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&led->lock, flags);
led->brightness = brightness;
+ spin_unlock_irqrestore(&led->lock, flags);
+
schedule_work(&led->work);
}
@@ -503,8 +509,14 @@ static enum led_brightness asus_kbd_back
{
struct asus_kbd_leds *led = container_of(led_cdev, struct asus_kbd_leds,
cdev);
+ enum led_brightness brightness;
+ unsigned long flags;
- return led->brightness;
+ spin_lock_irqsave(&led->lock, flags);
+ brightness = led->brightness;
+ spin_unlock_irqrestore(&led->lock, flags);
+
+ return brightness;
}
static void asus_kbd_backlight_work(struct work_struct *work)
@@ -512,11 +524,14 @@ static void asus_kbd_backlight_work(stru
struct asus_kbd_leds *led = container_of(work, struct asus_kbd_leds, work);
u8 buf[] = { FEATURE_KBD_REPORT_ID, 0xba, 0xc5, 0xc4, 0x00 };
int ret;
+ unsigned long flags;
if (led->removed)
return;
+ spin_lock_irqsave(&led->lock, flags);
buf[4] = led->brightness;
+ spin_unlock_irqrestore(&led->lock, flags);
ret = asus_kbd_set_report(led->hdev, buf, sizeof(buf));
if (ret < 0)
@@ -584,6 +599,7 @@ static int asus_kbd_register_leds(struct
drvdata->kbd_backlight->cdev.brightness_set = asus_kbd_backlight_set;
drvdata->kbd_backlight->cdev.brightness_get = asus_kbd_backlight_get;
INIT_WORK(&drvdata->kbd_backlight->work, asus_kbd_backlight_work);
+ spin_lock_init(&drvdata->kbd_backlight->lock);
ret = devm_led_classdev_register(&hdev->dev, &drvdata->kbd_backlight->cdev);
if (ret < 0) {
@@ -1119,9 +1135,13 @@ err_stop_hw:
static void asus_remove(struct hid_device *hdev)
{
struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+ unsigned long flags;
if (drvdata->kbd_backlight) {
+ spin_lock_irqsave(&drvdata->kbd_backlight->lock, flags);
drvdata->kbd_backlight->removed = true;
+ spin_unlock_irqrestore(&drvdata->kbd_backlight->lock, flags);
+
cancel_work_sync(&drvdata->kbd_backlight->work);
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 002/885] HID: asus: use spinlock to safely schedule workers
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 001/885] HID: asus: use spinlock to protect concurrent accesses Greg Kroah-Hartman
@ 2023-03-07 16:48 ` Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 003/885] powerpc/mm: Rearrange if-else block to avoid clang warning Greg Kroah-Hartman
` (885 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:48 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pietro Borrello, Benjamin Tissoires,
Stefan Ghinea
From: Pietro Borrello <borrello@diag.uniroma1.it>
commit 4ab3a086d10eeec1424f2e8a968827a6336203df upstream.
Use spinlocks to deal with workers introducing a wrapper
asus_schedule_work(), and several spinlock checks.
Otherwise, asus_kbd_backlight_set() may schedule led->work after the
structure has been freed, causing a use-after-free.
Fixes: af22a610bc38 ("HID: asus: support backlight on USB keyboards")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-5-7860c5763c38@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Stefan Ghinea <stefan.ghinea@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/hid-asus.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -491,6 +491,16 @@ static int rog_nkey_led_init(struct hid_
return ret;
}
+static void asus_schedule_work(struct asus_kbd_leds *led)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&led->lock, flags);
+ if (!led->removed)
+ schedule_work(&led->work);
+ spin_unlock_irqrestore(&led->lock, flags);
+}
+
static void asus_kbd_backlight_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
@@ -502,7 +512,7 @@ static void asus_kbd_backlight_set(struc
led->brightness = brightness;
spin_unlock_irqrestore(&led->lock, flags);
- schedule_work(&led->work);
+ asus_schedule_work(led);
}
static enum led_brightness asus_kbd_backlight_get(struct led_classdev *led_cdev)
@@ -526,9 +536,6 @@ static void asus_kbd_backlight_work(stru
int ret;
unsigned long flags;
- if (led->removed)
- return;
-
spin_lock_irqsave(&led->lock, flags);
buf[4] = led->brightness;
spin_unlock_irqrestore(&led->lock, flags);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 003/885] powerpc/mm: Rearrange if-else block to avoid clang warning
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 001/885] HID: asus: use spinlock to protect concurrent accesses Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 002/885] HID: asus: use spinlock to safely schedule workers Greg Kroah-Hartman
@ 2023-03-07 16:48 ` Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 004/885] ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller" Greg Kroah-Hartman
` (884 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:48 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Nathan Chancellor,
Christophe Leroy, Anders Roxell, Michael Ellerman,
Daniel Díaz
From: Anders Roxell <anders.roxell@linaro.org>
commit d78c8e32890ef7eca79ffd67c96022c7f9d8cce4 upstream.
Clang warns:
arch/powerpc/mm/book3s64/radix_tlb.c:1191:23: error: variable 'hstart' is uninitialized when used here
__tlbiel_va_range(hstart, hend, pid,
^~~~~~
arch/powerpc/mm/book3s64/radix_tlb.c:1191:31: error: variable 'hend' is uninitialized when used here
__tlbiel_va_range(hstart, hend, pid,
^~~~
Rework the 'if (IS_ENABLE(CONFIG_TRANSPARENT_HUGEPAGE))' so hstart/hend
is always initialized to silence the warnings. That will also simplify
the 'else' path. Clang is getting confused with these warnings, but the
warnings is a false-positive.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220810114318.3220630-1-anders.roxell@linaro.org
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/mm/book3s64/radix_tlb.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -1179,15 +1179,12 @@ static inline void __radix__flush_tlb_ra
}
}
} else {
- bool hflush = false;
+ bool hflush;
unsigned long hstart, hend;
- if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
- hstart = (start + PMD_SIZE - 1) & PMD_MASK;
- hend = end & PMD_MASK;
- if (hstart < hend)
- hflush = true;
- }
+ hstart = (start + PMD_SIZE - 1) & PMD_MASK;
+ hend = end & PMD_MASK;
+ hflush = IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) && hstart < hend;
if (type == FLUSH_TYPE_LOCAL) {
asm volatile("ptesync": : :"memory");
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 004/885] ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2023-03-07 16:48 ` [PATCH 6.1 003/885] powerpc/mm: Rearrange if-else block to avoid clang warning Greg Kroah-Hartman
@ 2023-03-07 16:48 ` Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 005/885] ARM: OMAP2+: Fix memory leak in realtime_counter_init() Greg Kroah-Hartman
` (883 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:48 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Damien Le Moal
From: Damien Le Moal <damien.lemoal@opensource.wdc.com>
commit 6210038aeaf49c395c2da57572246d93ec67f6d4 upstream.
Commit 104ff59af73a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI
controller") enabled low power mode for the Tiger Lake AHIC adapter in
the author system but created regressions for others. Revert this patch
for now until a better solution is found to make this adapter
eco-friendly.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217114
CC: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/ata/ahci.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -422,7 +422,6 @@ static const struct pci_device_id ahci_p
{ PCI_VDEVICE(INTEL, 0x34d3), board_ahci_low_power }, /* Ice Lake LP AHCI */
{ PCI_VDEVICE(INTEL, 0x02d3), board_ahci_low_power }, /* Comet Lake PCH-U AHCI */
{ PCI_VDEVICE(INTEL, 0x02d7), board_ahci_low_power }, /* Comet Lake PCH RAID */
- { PCI_VDEVICE(INTEL, 0xa0d3), board_ahci_low_power }, /* Tiger Lake UP{3,4} AHCI */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 005/885] ARM: OMAP2+: Fix memory leak in realtime_counter_init()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2023-03-07 16:48 ` [PATCH 6.1 004/885] ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller" Greg Kroah-Hartman
@ 2023-03-07 16:48 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 006/885] arm64: dts: qcom: qcs404: use symbol names for PCIe resets Greg Kroah-Hartman
` (882 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:48 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Chen Hui, Tony Lindgren, Sasha Levin
From: Chen Hui <judy.chenhui@huawei.com>
[ Upstream commit ed8167cbf65c2b6ff6faeb0f96ded4d6d581e1ac ]
The "sys_clk" resource is malloced by clk_get(),
it is not released when the function return.
Fixes: fa6d79d27614 ("ARM: OMAP: Add initialisation for the real-time counter.")
Signed-off-by: Chen Hui <judy.chenhui@huawei.com>
Message-Id: <20221108141917.46796-1-judy.chenhui@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-omap2/timer.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 620ba69c8f114..5677c4a08f376 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -76,6 +76,7 @@ static void __init realtime_counter_init(void)
}
rate = clk_get_rate(sys_clk);
+ clk_put(sys_clk);
if (soc_is_dra7xx()) {
/*
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 006/885] arm64: dts: qcom: qcs404: use symbol names for PCIe resets
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2023-03-07 16:48 ` [PATCH 6.1 005/885] ARM: OMAP2+: Fix memory leak in realtime_counter_init() Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 007/885] arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up Greg Kroah-Hartman
` (881 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Konrad Dybcio, Dmitry Baryshkov,
Bjorn Andersson, Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 41a37d157a613444c97e8f71a5fb2a21116b70d7 ]
The commit e5bbbff5b7d7 ("clk: gcc-qcs404: Add PCIe resets") added names
for PCIe resets, but it did not change the existing qcs404.dtsi to use
these names. Do it now and use symbol names to make it easier to check
and modify the dtsi in future.
Fixes: e5bbbff5b7d7 ("clk: gcc-qcs404: Add PCIe resets")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-14-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 80f2d05595fa6..bec1b6e5a67ac 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -792,7 +792,7 @@ pcie_phy: phy@7786000 {
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
- <&gcc 21>;
+ <&gcc GCC_PCIE_0_PIPE_ARES>;
reset-names = "phy", "pipe";
clock-output-names = "pcie_0_pipe_clk";
@@ -1322,12 +1322,12 @@ pcie: pci@10000000 {
<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
clock-names = "iface", "aux", "master_bus", "slave_bus";
- resets = <&gcc 18>,
- <&gcc 17>,
- <&gcc 15>,
- <&gcc 19>,
+ resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>,
+ <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>,
+ <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>,
+ <&gcc GCC_PCIE_0_CORE_STICKY_ARES>,
<&gcc GCC_PCIE_0_BCR>,
- <&gcc 16>;
+ <&gcc GCC_PCIE_0_AHB_ARES>;
reset-names = "axi_m",
"axi_s",
"axi_m_sticky",
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 007/885] arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 006/885] arm64: dts: qcom: qcs404: use symbol names for PCIe resets Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 008/885] arm64: dts: qcom: sm8150-kumano: Panel framebuffer is 2.5k instead of 4k Greg Kroah-Hartman
` (880 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Konrad Dybcio, Neil Armstrong,
Bjorn Andersson, Sasha Levin
From: Konrad Dybcio <konrad.dybcio@linaro.org>
[ Upstream commit 43069b9cd358aebc692e654de91ee06ff66e26af ]
The hardware turns out to be pretty sluggish at assuming it can only
do USB2 with just a USB2 phy assigned to it - before it needed about
6 minutes to acknowledge that.
Limit it to USB-HS explicitly to make USB come up about 720x faster.
Fixes: 9da65e441d4d ("arm64: dts: qcom: Add support for SONY Xperia X Performance / XZ / XZs (msm8996, Tone platform)")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124220147.102611-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index ca7c8d2e1d3d9..a60decd894291 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -944,10 +944,6 @@ touch_int_sleep: touch-int-sleep {
};
};
-/*
- * For reasons that are currently unknown (but probably related to fusb301), USB takes about
- * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
- */
&usb3 {
status = "okay";
qcom,select-utmi-as-pipe-clk;
@@ -956,6 +952,7 @@ &usb3 {
&usb3_dwc3 {
extcon = <&usb3_id>;
dr_mode = "peripheral";
+ maximum-speed = "high-speed";
phys = <&hsusb_phy1>;
phy-names = "usb2-phy";
snps,hird-threshold = /bits/ 8 <0>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 008/885] arm64: dts: qcom: sm8150-kumano: Panel framebuffer is 2.5k instead of 4k
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 007/885] arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 009/885] arm64: dts: qcom: sm6350: Fix up the ramoops node Greg Kroah-Hartman
` (879 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marijn Suijten, Konrad Dybcio,
Bjorn Andersson, Sasha Levin
From: Marijn Suijten <marijn.suijten@somainline.org>
[ Upstream commit be8de06dc397c45cb0f3fe04084089c3f06c419f ]
The framebuffer configuration for kumano griffin, written in kumano dtsi
(which is overwritten in bahamut dts for its smaller panel) has to use a
1096x2560 configuration as this is what the panel (and framebuffer area)
has been initialized to. Downstream userspace also has access to (and
uses) this 2.5k mode by default, and only switches the panel to 4k when
requested.
Fixes: d0a6ce59ea4e ("arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209191733.1458031-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index fb6e5a140c9f6..04c71f74ab72d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -33,9 +33,10 @@ chosen {
framebuffer: framebuffer@9c000000 {
compatible = "simple-framebuffer";
reg = <0 0x9c000000 0 0x2300000>;
- width = <1644>;
- height = <3840>;
- stride = <(1644 * 4)>;
+ /* Griffin BL initializes in 2.5k mode, not 4k */
+ width = <1096>;
+ height = <2560>;
+ stride = <(1096 * 4)>;
format = "a8r8g8b8";
/*
* That's (going to be) a lot of clocks, but it's necessary due
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 009/885] arm64: dts: qcom: sm6350: Fix up the ramoops node
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 008/885] arm64: dts: qcom: sm8150-kumano: Panel framebuffer is 2.5k instead of 4k Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 010/885] arm64: dts: qcom: sm6125: Reorder HSUSB PHY clocks to match bindings Greg Kroah-Hartman
` (878 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Luca Weiss, Konrad Dybcio,
Bjorn Andersson, Sasha Levin
From: Konrad Dybcio <konrad.dybcio@linaro.org>
[ Upstream commit 3b2ff50da499178cc418f4b319e279d1b52958ed ]
Fix up the ramoops node to make it match bindings and style:
- remove "removed-dma-pool"
- don't pad size to 8 hex digits
- change cc-size to ecc-size so that it's used
- increase ecc-size from to 16
- remove the zeroed ftrace-size
Fixes: 5f82b9cda61e ("arm64: dts: qcom: Add SM6350 device tree")
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221210102600.589028-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 7be5fc8dec671..35f621ef9da54 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -342,13 +342,12 @@ last_log_region: memory@ffbc0000 {
};
ramoops: ramoops@ffc00000 {
- compatible = "removed-dma-pool", "ramoops";
- reg = <0 0xffc00000 0 0x00100000>;
+ compatible = "ramoops";
+ reg = <0 0xffc00000 0 0x100000>;
record-size = <0x1000>;
console-size = <0x40000>;
- ftrace-size = <0x0>;
msg-size = <0x20000 0x20000>;
- cc-size = <0x0>;
+ ecc-size = <16>;
no-map;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 010/885] arm64: dts: qcom: sm6125: Reorder HSUSB PHY clocks to match bindings
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 009/885] arm64: dts: qcom: sm6350: Fix up the ramoops node Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 011/885] arm64: dts: qcom: sm6125-seine: Clean up gpio-keys (volume down) Greg Kroah-Hartman
` (877 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marijn Suijten, Martin Botka,
Konrad Dybcio, Bjorn Andersson, Sasha Levin
From: Marijn Suijten <marijn.suijten@somainline.org>
[ Upstream commit 8416262b0ea46d84767141b074748f4d4f37736a ]
Reorder the clocks and corresponding names to match the QUSB2 phy
schema, fixing the following CHECK_DTBS errors:
arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dtb: phy@1613000: clock-names:0: 'cfg_ahb' was expected
From schema: /newdata/aosp-r/kernel/mainline/kernel/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dtb: phy@1613000: clock-names:1: 'ref' was expected
From schema: /newdata/aosp-r/kernel/mainline/kernel/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216213343.1140143-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm6125.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 7818fb6c5a10a..271247b371759 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -442,9 +442,9 @@ hsusb_phy1: phy@1613000 {
reg = <0x01613000 0x180>;
#phy-cells = <0>;
- clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
- <&gcc GCC_AHB2PHY_USB_CLK>;
- clock-names = "ref", "cfg_ahb";
+ clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
status = "disabled";
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 011/885] arm64: dts: qcom: sm6125-seine: Clean up gpio-keys (volume down)
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 010/885] arm64: dts: qcom: sm6125: Reorder HSUSB PHY clocks to match bindings Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 012/885] arm64: dts: imx8m: Align SoC unique ID node unit address Greg Kroah-Hartman
` (876 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marijn Suijten, Konrad Dybcio,
Bjorn Andersson, Sasha Levin
From: Marijn Suijten <marijn.suijten@somainline.org>
[ Upstream commit a9f6a13da473bb6c7406d2784d9e3792f6763cba ]
- Remove autorepeat (leave key repetition to userspace);
- Remove unneeded status = "okay" (this is the default);
- Remove unneeded linux,input-type <EV_KEY> (this is the default for
gpio-keys);
- Allow the interrupt line for this button to be disabled;
- Use a full, descriptive node name;
- Set proper bias on the GPIO via pinctrl;
- Sort properties;
- Replace deprecated gpio-key,wakeup property with wakeup-source.
Fixes: 82e1783890b7 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222192443.119103-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../qcom/sm6125-sony-xperia-seine-pdx201.dts | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 6a8b88cc43853..e1ab5b5189949 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -40,17 +40,18 @@ extcon_usb: extcon-usb {
};
gpio-keys {
- status = "okay";
compatible = "gpio-keys";
- autorepeat;
- key-vol-dn {
+ pinctrl-0 = <&vol_down_n>;
+ pinctrl-names = "default";
+
+ key-volume-down {
label = "Volume Down";
gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
- gpio-key,wakeup;
debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
};
};
@@ -108,6 +109,14 @@ &sdhc_1 {
&tlmm {
gpio-reserved-ranges = <22 2>, <28 6>;
+
+ vol_down_n: vol-down-n-state {
+ pins = "gpio47";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
};
&usb3 {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 012/885] arm64: dts: imx8m: Align SoC unique ID node unit address
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 011/885] arm64: dts: qcom: sm6125-seine: Clean up gpio-keys (volume down) Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 013/885] ARM: zynq: Fix refcount leak in zynq_early_slcr_init Greg Kroah-Hartman
` (875 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peng Fan, Marek Vasut, Shawn Guo,
Sasha Levin
From: Marek Vasut <marex@denx.de>
[ Upstream commit ee0d68f219be8618f53d3f8808952e20525e3f30 ]
Align the SoC unique ID DT node unit address with its reg property.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Fixes: cbff23797fa1 ("arm64: dts: imx8m: add NVMEM provider and consumer to read soc unique ID")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 50ef92915c671..420ba0d6f1343 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -562,7 +562,7 @@ ocotp: efuse@30350000 {
#address-cells = <1>;
#size-cells = <1>;
- imx8mm_uid: unique-id@410 {
+ imx8mm_uid: unique-id@4 {
reg = <0x4 0x8>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 67b554ba690ca..ba29b5b556ffa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -563,7 +563,7 @@ ocotp: efuse@30350000 {
#address-cells = <1>;
#size-cells = <1>;
- imx8mn_uid: unique-id@410 {
+ imx8mn_uid: unique-id@4 {
reg = <0x4 0x8>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 47fd6a0ba05ad..25630a395db56 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -424,7 +424,7 @@ ocotp: efuse@30350000 {
#address-cells = <1>;
#size-cells = <1>;
- imx8mp_uid: unique-id@420 {
+ imx8mp_uid: unique-id@8 {
reg = <0x8 0x8>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 19eaa523564d3..4724ed0cbff94 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -592,7 +592,7 @@ ocotp: efuse@30350000 {
#address-cells = <1>;
#size-cells = <1>;
- imx8mq_uid: soc-uid@410 {
+ imx8mq_uid: soc-uid@4 {
reg = <0x4 0x8>;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 013/885] ARM: zynq: Fix refcount leak in zynq_early_slcr_init
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 012/885] arm64: dts: imx8m: Align SoC unique ID node unit address Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 014/885] arm64: dts: mediatek: mt8195: Add power domain to U3PHY1 T-PHY Greg Kroah-Hartman
` (874 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Qiheng Lin, Michal Simek, Sasha Levin
From: Qiheng Lin <linqiheng@huawei.com>
[ Upstream commit 9eedb910a3be0005b88c696a8552c0d4c9937cd4 ]
of_find_compatible_node() returns a node pointer with refcount incremented,
we should use of_node_put() on error path.
Add missing of_node_put() to avoid refcount leak.
Fixes: 3329659df030 ("ARM: zynq: Simplify SLCR initialization")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20221129140544.41293-1-linqiheng@huawei.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-zynq/slcr.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 37707614885a5..9765b3f4c2fc5 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -213,6 +213,7 @@ int __init zynq_early_slcr_init(void)
zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
if (IS_ERR(zynq_slcr_regmap)) {
pr_err("%s: failed to find zynq-slcr\n", __func__);
+ of_node_put(np);
return -ENODEV;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 014/885] arm64: dts: mediatek: mt8195: Add power domain to U3PHY1 T-PHY
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 013/885] ARM: zynq: Fix refcount leak in zynq_early_slcr_init Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 015/885] arm64: dts: mediatek: mt8183: Fix systimer 13 MHz clock description Greg Kroah-Hartman
` (873 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit a9f6721a3c92764582ed12296292fda4a7f2dd25 ]
Assign power domain to the U3PHY1 T-PHY in otder to keep this PHY
alive after unused PD shutdown and to be able to completely cut
and restore power to it, for example, to save some power during
system suspend/sleep.
Fixes: 2b515194bf0c ("arm64: dts: mt8195: Add power domains controller")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221214131117.108008-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 6f5fa7ca49013..350d6c2ea622a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1410,6 +1410,7 @@ u3phy1: t-phy@11e30000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x11e30000 0xe00>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
status = "disabled";
u2port1: usb-phy@0 {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 015/885] arm64: dts: mediatek: mt8183: Fix systimer 13 MHz clock description
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 014/885] arm64: dts: mediatek: mt8195: Add power domain to U3PHY1 T-PHY Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 016/885] arm64: dts: mediatek: mt8192: " Greg Kroah-Hartman
` (872 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen-Yu Tsai,
AngeloGioacchino Del Regno, Matthias Brugger, Sasha Levin
From: Chen-Yu Tsai <wenst@chromium.org>
[ Upstream commit ce8a06b5bac75ccce99c0cf91b96b767d64f28a7 ]
The systimer block derives its 13 MHz clock by dividing the main 26 MHz
oscillator clock by 2 internally, not through the TOPCKGEN clock
controller.
On the MT8183 this divider is set either by power-on-reset or by the
bootloader. The bootloader may then make the divider unconfigurable to,
but can be read out by, the operating system.
Making the systimer block take the 26 MHz clock directly requires
changing the implementations. As an ABI compatible fix, change the
input clock of the systimer block a fixed factor divide-by-2 clock
that takes the 26 MHz oscillator as its input.
Fixes: 5bc8e2875ffb ("arm64: dts: mt8183: add systimer0 device node")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221201084229.3464449-2-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 402136bfd5350..268a1f28af8ce 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -585,6 +585,15 @@ psci {
method = "smc";
};
+ clk13m: fixed-factor-clock-13m {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&clk26m>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "clk13m";
+ };
+
clk26m: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -968,8 +977,7 @@ systimer: timer@10017000 {
"mediatek,mt6765-timer";
reg = <0 0x10017000 0 0x1000>;
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&topckgen CLK_TOP_CLK13M>;
- clock-names = "clk13m";
+ clocks = <&clk13m>;
};
iommu: iommu@10205000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 016/885] arm64: dts: mediatek: mt8192: Fix systimer 13 MHz clock description
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 015/885] arm64: dts: mediatek: mt8183: Fix systimer 13 MHz clock description Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 017/885] arm64: dts: mediatek: mt8195: " Greg Kroah-Hartman
` (871 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen-Yu Tsai,
AngeloGioacchino Del Regno, Matthias Brugger, Sasha Levin
From: Chen-Yu Tsai <wenst@chromium.org>
[ Upstream commit f19f68e56b0c6631984a9f5023035d4bd09612bb ]
The systimer block derives its 13 MHz clock by dividing the main 26 MHz
oscillator clock by 2 internally, not through the TOPCKGEN clock
controller.
On the MT8192 this divider is fixed to /2 and is not configurable.
Making the systimer block take the 26 MHz clock directly requires
changing the implementations. As an ABI compatible fix, change the
input clock of the systimer block a fixed factor divide-by-2 clock
that takes the 26 MHz oscillator as its input.
Fixes: 48489980e27e ("arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221201084229.3464449-3-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 6b20376191a75..8163684a23f6e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -29,6 +29,15 @@ aliases {
rdma4 = &rdma4;
};
+ clk13m: fixed-factor-clock-13m {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&clk26m>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "clk13m";
+ };
+
clk26m: oscillator0 {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -531,8 +540,7 @@ systimer: timer@10017000 {
"mediatek,mt6765-timer";
reg = <0 0x10017000 0 0x1000>;
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&topckgen CLK_TOP_CSW_F26M_D2>;
- clock-names = "clk13m";
+ clocks = <&clk13m>;
};
pwrap: pwrap@10026000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 017/885] arm64: dts: mediatek: mt8195: Fix systimer 13 MHz clock description
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 016/885] arm64: dts: mediatek: mt8192: " Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 018/885] arm64: dts: mediatek: mt8186: " Greg Kroah-Hartman
` (870 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen-Yu Tsai,
AngeloGioacchino Del Regno, Matthias Brugger, Sasha Levin
From: Chen-Yu Tsai <wenst@chromium.org>
[ Upstream commit 0f1c806b65d136a5fe0b88adad5ff1cb451fc401 ]
The systimer block derives its 13 MHz clock by dividing the main 26 MHz
oscillator clock by 2 internally, not through the TOPCKGEN clock
controller.
On the MT8195 this divider is set either by power-on-reset or by the
bootloader. The bootloader may then make the divider unconfigurable to,
but can be read out by, the operating system.
Making the systimer block take the 26 MHz clock directly requires
changing the implementations. As an ABI compatible fix, change the
input clock of the systimer block a fixed factor divide-by-2 clock
that takes the 26 MHz oscillator as its input.
Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221201084229.3464449-4-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 350d6c2ea622a..6dad8aaee436c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -244,6 +244,15 @@ sound: mt8195-sound {
status = "disabled";
};
+ clk13m: fixed-factor-clock-13m {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&clk26m>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "clk13m";
+ };
+
clk26m: oscillator-26m {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -701,7 +710,7 @@ systimer: timer@10017000 {
"mediatek,mt6765-timer";
reg = <0 0x10017000 0 0x1000>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&topckgen CLK_TOP_CLK26M_D2>;
+ clocks = <&clk13m>;
};
pwrap: pwrap@10024000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 018/885] arm64: dts: mediatek: mt8186: Fix systimer 13 MHz clock description
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 017/885] arm64: dts: mediatek: mt8195: " Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 019/885] arm64: dts: qcom: sdm845-db845c: fix audio codec interrupt pin name Greg Kroah-Hartman
` (869 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen-Yu Tsai,
AngeloGioacchino Del Regno, Matthias Brugger, Sasha Levin
From: Chen-Yu Tsai <wenst@chromium.org>
[ Upstream commit b391efba57ff085233d5ead5e01817bf4b71d999 ]
The systimer block derives its 13 MHz clock by dividing the main 26 MHz
oscillator clock by 2 internally. The 13 MHz clock is not a separate
oscillator.
Fix this by making the 13 MHz clock a divide-by-2 fixed factor clock,
taking its input from the main 26 MHz oscillator.
Fixes: 2e78620b1350 ("arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221201084229.3464449-5-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 64693c17af9ec..fb32e3efcdb12 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -211,10 +211,12 @@ l3_0: l3-cache {
};
};
- clk13m: oscillator-13m {
- compatible = "fixed-clock";
+ clk13m: fixed-factor-clock-13m {
+ compatible = "fixed-factor-clock";
#clock-cells = <0>;
- clock-frequency = <13000000>;
+ clocks = <&clk26m>;
+ clock-div = <2>;
+ clock-mult = <1>;
clock-output-names = "clk13m";
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 019/885] arm64: dts: qcom: sdm845-db845c: fix audio codec interrupt pin name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 018/885] arm64: dts: mediatek: mt8186: " Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 020/885] x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC Greg Kroah-Hartman
` (868 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Doug Anderson, Krzysztof Kozlowski,
Konrad Dybcio, Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 740862bb5f59b93efb390a417995f88a64bdc323 ]
The pin config entry should have a string, not number, for the GPIO used
as WCD9340 audio codec interrupt.
Fixes: 89a32a4e769c ("arm64: dts: qcom: db845c: add analog audio support")
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222151319.122398-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a3e15dedd60cb..c289bf0903b45 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -969,7 +969,7 @@ sdc2_card_det_n: sd-card-det-n {
};
wcd_intr_default: wcd_intr_default {
- pins = <54>;
+ pins = "gpio54";
function = "gpio";
input-enable;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 020/885] x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 019/885] arm64: dts: qcom: sdm845-db845c: fix audio codec interrupt pin name Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 021/885] arm64: dts: qcom: sc7180: correct SPMI bus address cells Greg Kroah-Hartman
` (867 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Leo Duran, Kishon Vijay Abraham I,
Borislav Petkov (AMD),
Zhang Rui, Rafael J. Wysocki, Sasha Levin
From: Kishon Vijay Abraham I <kvijayab@amd.com>
[ Upstream commit e2869bd7af608c343988429ceb1c2fe99644a01f ]
Section 5.2.12.12 Processor Local x2APIC Structure in the ACPI v6.5
spec mandates that both "enabled" and "online capable" Local APIC Flags
should be used to determine if the processor is usable or not.
However, Linux doesn't use the "online capable" flag for x2APIC to
determine if the processor is usable. As a result, cpu_possible_mask has
incorrect value and results in more memory getting allocated for per_cpu
variables than it is going to be used.
Make sure Linux parses both "enabled" and "online capable" flags for
x2APIC to correctly determine if the processor is usable.
Fixes: aa06e20f1be6 ("x86/ACPI: Don't add CPUs that are not online capable")
Reported-by: Leo Duran <leo.duran@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230105041059.39366-1-kvijayab@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/acpi/boot.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 907cc98b19380..518bda50068cb 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -188,6 +188,17 @@ static int acpi_register_lapic(int id, u32 acpiid, u8 enabled)
return cpu;
}
+static bool __init acpi_is_processor_usable(u32 lapic_flags)
+{
+ if (lapic_flags & ACPI_MADT_ENABLED)
+ return true;
+
+ if (acpi_support_online_capable && (lapic_flags & ACPI_MADT_ONLINE_CAPABLE))
+ return true;
+
+ return false;
+}
+
static int __init
acpi_parse_x2apic(union acpi_subtable_headers *header, const unsigned long end)
{
@@ -212,6 +223,10 @@ acpi_parse_x2apic(union acpi_subtable_headers *header, const unsigned long end)
if (apic_id == 0xffffffff)
return 0;
+ /* don't register processors that cannot be onlined */
+ if (!acpi_is_processor_usable(processor->lapic_flags))
+ return 0;
+
/*
* We need to register disabled CPU as well to permit
* counting disabled CPUs. This allows us to size
@@ -250,9 +265,7 @@ acpi_parse_lapic(union acpi_subtable_headers * header, const unsigned long end)
return 0;
/* don't register processors that can not be onlined */
- if (acpi_support_online_capable &&
- !(processor->lapic_flags & ACPI_MADT_ENABLED) &&
- !(processor->lapic_flags & ACPI_MADT_ONLINE_CAPABLE))
+ if (!acpi_is_processor_usable(processor->lapic_flags))
return 0;
/*
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 021/885] arm64: dts: qcom: sc7180: correct SPMI bus address cells
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 020/885] x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 022/885] arm64: dts: qcom: sc7280: " Greg Kroah-Hartman
` (866 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski, Konrad Dybcio,
Stephen Boyd, Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 1f75745537222172f84783d369bbd1fb2d4b6414 ]
The SPMI bus uses two address cells and zero size cells (second reg
entry - SPMI_USID - is not the size):
spmi@c440000: #address-cells:0:0: 2 was expected
Fixes: 0f9dc5f09fbd ("arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213101921.47924-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 58976a1ba06be..b16886f715179 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3238,8 +3238,8 @@ spmi_bus: spmi@c440000 {
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
cell-index = <0>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 022/885] arm64: dts: qcom: sc7280: correct SPMI bus address cells
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 021/885] arm64: dts: qcom: sc7180: correct SPMI bus address cells Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 023/885] arm64: dts: qcom: sc8280xp: " Greg Kroah-Hartman
` (865 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski, Konrad Dybcio,
Stephen Boyd, Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 8da3786a91e56fe0c4aeb2c2209744474af6e517 ]
The SPMI bus uses two address cells and zero size cells (second reg
entry - SPMI_USID - is not the size):
spmi@c440000: #address-cells:0:0: 2 was expected
Fixes: 14abf8dfe364 ("arm64: dts: qcom: sc7280: Add SPMI PMIC arbiter device for SC7280")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213101921.47924-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 4cdc88d339445..516e70bf04ce9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4242,8 +4242,8 @@ spmi_bus: spmi@c440000 {
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 023/885] arm64: dts: qcom: sc8280xp: correct SPMI bus address cells
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 022/885] arm64: dts: qcom: sc7280: " Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 024/885] arm64: dts: qcom: sc8280xp: Vote for CX in USB controllers Greg Kroah-Hartman
` (864 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski, Konrad Dybcio,
Stephen Boyd, Johan Hovold, Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 76d9e8b4d54ae2cb91a68f0cb82624887de767a7 ]
The SPMI bus uses two address cells and zero size cells (second reg
entry - SPMI_USID - is not the size):
spmi@c440000: #address-cells:0:0: 2 was expected
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213101921.47924-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 146a4285c3952..8181ccf9c8815 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1470,8 +1470,8 @@ spmi_bus: spmi@c440000 {
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 024/885] arm64: dts: qcom: sc8280xp: Vote for CX in USB controllers
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 023/885] arm64: dts: qcom: sc8280xp: " Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 025/885] arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node Greg Kroah-Hartman
` (863 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bjorn Andersson, Konrad Dybcio,
Bjorn Andersson, Sasha Levin
From: Bjorn Andersson <quic_bjorande@quicinc.com>
[ Upstream commit fe07640280cd29ac2997a617a1fb5487feef9387 ]
Running GCC_USB30_*_MASTER_CLK at 200MHz requires CX at nominal level,
not doing so results in occasional lockups. This was previously hidden
by the fact that the display stack incorrectly voted for CX (instead of
MMCX).
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112135117.3836655-1-quic_bjorande@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1287,6 +1287,7 @@
"ss_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
@@ -1341,6 +1342,7 @@
"ss_phy_irq";
power-domains = <&gcc USB30_SEC_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
resets = <&gcc GCC_USB30_SEC_BCR>;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 025/885] arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 024/885] arm64: dts: qcom: sc8280xp: Vote for CX in USB controllers Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 026/885] arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name Greg Kroah-Hartman
` (862 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vyacheslav Bocharov,
Martin Blumenstingl, Neil Armstrong, Sasha Levin
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit f95acdb2b4af21caae2c76a48e565158181386ca ]
Unit addresses should be written using lower-case hex characters. Use
wifi_mac@c to fix a yaml schema validation error once the eFuse
dt-bindings have been converted to a yaml schema:
efuse: Unevaluated properties are not allowed ('wifi_mac@C' was
unexpected)
Also node names should use hyphens instead of underscores as the latter
can also cause warnings.
Fixes: abfaae24ecf3 ("arm64: dts: meson-gxl: add support for JetHub H1")
Acked-by: Vyacheslav Bocharov <adeep@lexina.in>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230111211350.1461860-2-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 6831137c5c109..270483e007bc8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -90,7 +90,7 @@ bt_mac: bt_mac@6 {
reg = <0x6 0x6>;
};
- wifi_mac: wifi_mac@C {
+ wifi_mac: wifi-mac@c {
reg = <0xc 0x6>;
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 026/885] arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 025/885] arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 027/885] arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names Greg Kroah-Hartman
` (861 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vyacheslav Bocharov,
Martin Blumenstingl, Neil Armstrong, Sasha Levin
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit cb199de1d3aecb02556d8a6e26393015effa0a9f ]
Node names should use hyphens instead of underscores to not cause
warnings.
Fixes: abfaae24ecf3 ("arm64: dts: meson-gxl: add support for JetHub H1")
Suggested-by: Vyacheslav Bocharov <adeep@lexina.in>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230111211350.1461860-3-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 270483e007bc8..bb7412070cb26 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -86,7 +86,7 @@ sdio_pwrseq: sdio-pwrseq {
};
&efuse {
- bt_mac: bt_mac@6 {
+ bt_mac: bt-mac@6 {
reg = <0x6 0x6>;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 027/885] arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 026/885] arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 028/885] arm64: dts: meson-gx: Fix Ethernet MAC address unit name Greg Kroah-Hartman
` (860 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Martin Blumenstingl, Neil Armstrong,
Sasha Levin
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit 2f66eeb06e3e8b1cac9e9093be3baadbac2709eb ]
Node names should use hyphens instead of underscores to not cause
warnings.
Fixes: 59ec069d5055 ("arm64: dts: meson-axg: add support for JetHub D1p (j110)")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230111211350.1461860-4-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
index 5836b00309312..22fd43b5fd73c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -168,15 +168,15 @@ sn: sn@32 {
reg = <0x32 0x20>;
};
- eth_mac: eth_mac@0 {
+ eth_mac: eth-mac@0 {
reg = <0x0 0x6>;
};
- bt_mac: bt_mac@6 {
+ bt_mac: bt-mac@6 {
reg = <0x6 0x6>;
};
- wifi_mac: wifi_mac@c {
+ wifi_mac: wifi-mac@c {
reg = <0xc 0x6>;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 028/885] arm64: dts: meson-gx: Fix Ethernet MAC address unit name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 027/885] arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 029/885] arm64: dts: meson-g12a: Fix internal Ethernet PHY " Greg Kroah-Hartman
` (859 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vyacheslav Bocharov,
Martin Blumenstingl, Neil Armstrong, Sasha Levin
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit 8ed5310356bfa47cc6bb4221ae6b21258c52e3d1 ]
Unit names should use hyphens instead of underscores to not cause
warnings.
Fixes: bfe59f92d306 ("ARM64: dts: amlogic: gxbb: Enable NVMEM")
Suggested-by: Vyacheslav Bocharov <adeep@lexina.in>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230111211350.1461860-5-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index fa6cff4a2ebc3..a56fa88b387e8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -232,7 +232,7 @@ sn: sn@14 {
reg = <0x14 0x10>;
};
- eth_mac: eth_mac@34 {
+ eth_mac: eth-mac@34 {
reg = <0x34 0x10>;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 029/885] arm64: dts: meson-g12a: Fix internal Ethernet PHY unit name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 028/885] arm64: dts: meson-gx: Fix Ethernet MAC address unit name Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 030/885] arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address Greg Kroah-Hartman
` (858 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Martin Blumenstingl, Neil Armstrong,
Sasha Levin
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit e7303651bbc76c848007f1cfac1fbeaa65f600d1 ]
Documentation/devicetree/bindings/net/ethernet-phy.yaml defines that the
node name for Ethernet PHYs should match the following pattern:
^ethernet-phy(@[a-f0-9]+)?$
Replace the underscore with a hyphen to adhere to this binding.
Fixes: 280c17df8fbf ("arm64: dts: meson: g12a: add mdio multiplexer")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230111211350.1461860-6-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 894cea697550a..131a8a5a9f5a0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1694,7 +1694,7 @@ int_mdio: mdio@1 {
#address-cells = <1>;
#size-cells = <0>;
- internal_ephy: ethernet_phy@8 {
+ internal_ephy: ethernet-phy@8 {
compatible = "ethernet-phy-id0180.3301",
"ethernet-phy-ieee802.3-c22";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 030/885] arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 029/885] arm64: dts: meson-g12a: Fix internal Ethernet PHY " Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 031/885] cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again* Greg Kroah-Hartman
` (857 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Martin Blumenstingl, Neil Armstrong,
Sasha Levin
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit f189c869ad92787ddd753558bcbae89d75825bb6 ]
Node names should be generic and use hyphens instead of underscores to
not cause warnings. Also nodes without a reg property should not have a
unit-address. Change the scpi_dvfs node to use clock-controller as node
name without a unit address (since it does not have a reg property).
Fixes: 70db166a2baa ("ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230111211350.1461860-7-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index a56fa88b387e8..3a53398176b35 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -249,7 +249,7 @@ scpi {
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
- scpi_dvfs: scpi_clocks@0 {
+ scpi_dvfs: clock-controller {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 031/885] cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again*
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 030/885] arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 032/885] arm64: dts: ti: k3-am62: Enable SPI nodes at the board level Greg Kroah-Hartman
` (856 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peter Zijlstra (Intel),
Ingo Molnar, Tony Lindgren, Ulf Hansson, Rafael J. Wysocki,
Frederic Weisbecker, Sasha Levin
From: Peter Zijlstra <peterz@infradead.org>
[ Upstream commit 6d9c7f51b1d9179bf7c3542267c656a934e8af23 ]
So objtool found this bug:
vmlinux.o: warning: objtool: intel_idle_irq+0x10c: call to trace_hardirqs_off() leaves .noinstr.text section
As per commit 32d4fd5751ea ("cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE"):
"must not have tracing in idle functions"
Clearly people can't read and tinker along until splat dissapears.
This straight up reverts commit d295ad34f236 ("intel_idle: Fix false
positive RCU splats due to incorrect hardirqs state").
It doesn't re-introduce the problem because preceding patches fixed it
properly.
Fixes: d295ad34f236 ("intel_idle: Fix false positive RCU splats due to incorrect hardirqs state")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.434302128@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/idle/intel_idle.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index cfeb24d40d378..f060ac7376e69 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -168,13 +168,7 @@ static __cpuidle int intel_idle_irq(struct cpuidle_device *dev,
raw_local_irq_enable();
ret = __intel_idle(dev, drv, index);
-
- /*
- * The lockdep hardirqs state may be changed to 'on' with timer
- * tick interrupt followed by __do_softirq(). Use local_irq_disable()
- * to keep the hardirqs state correct.
- */
- local_irq_disable();
+ raw_local_irq_disable();
return ret;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 032/885] arm64: dts: ti: k3-am62: Enable SPI nodes at the board level
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 031/885] cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again* Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 033/885] arm64: dts: ti: k3-am62-main: Fix clocks for McSPI Greg Kroah-Hartman
` (855 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrew Davis, Nishanth Menon,
Bryan Brattlof, Sasha Levin
From: Andrew Davis <afd@ti.com>
[ Upstream commit 361e8b7144405b78bd37cc3e9b2d23fc2e2ed6d5 ]
SPI nodes defined in the top-level AM62x SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information.
As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.
Disable the SPI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20221018211533.21335-4-afd@ti.com
Stable-dep-of: 6be5d8e5d180 ("arm64: dts: ti: k3-am62-main: Fix clocks for McSPI")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 3 +++
arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi | 2 ++
2 files changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 03660476364f3..27b4034d0db2e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -307,6 +307,7 @@ main_spi0: spi@20100000 {
#size-cells = <0>;
power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 172 0>;
+ status = "disabled";
};
main_spi1: spi@20110000 {
@@ -317,6 +318,7 @@ main_spi1: spi@20110000 {
#size-cells = <0>;
power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 173 0>;
+ status = "disabled";
};
main_spi2: spi@20120000 {
@@ -327,6 +329,7 @@ main_spi2: spi@20120000 {
#size-cells = <0>;
power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 174 0>;
+ status = "disabled";
};
main_gpio_intr: interrupt-controller@a00000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index f56c803560f26..df2d8f36a31bd 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -42,6 +42,7 @@ mcu_spi0: spi@4b00000 {
#size-cells = <0>;
power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 147 0>;
+ status = "disabled";
};
mcu_spi1: spi@4b10000 {
@@ -52,6 +53,7 @@ mcu_spi1: spi@4b10000 {
#size-cells = <0>;
power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 148 0>;
+ status = "disabled";
};
mcu_gpio_intr: interrupt-controller@4210000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 033/885] arm64: dts: ti: k3-am62-main: Fix clocks for McSPI
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 032/885] arm64: dts: ti: k3-am62: Enable SPI nodes at the board level Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 034/885] arm64: tegra: Fix duplicate regulator on Jetson TX1 Greg Kroah-Hartman
` (854 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bryan Brattlof, Dhruva Gole,
Vignesh Raghavendra, Sasha Levin
From: Dhruva Gole <d-gole@ti.com>
[ Upstream commit 6be5d8e5d1804eb4cec29cd8a85dc9cb18683b5d ]
Fixes the clock Device ID's in the DT according to the tisci docs clock
identifiers for AM62x
Fixes: c37c58fdeb8a ("arm64: dts: ti: k3-am62: Add more peripheral nodes")
Reviewed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230103054840.1133711-1-d-gole@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 27b4034d0db2e..edcf6b2718814 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -306,7 +306,7 @@ main_spi0: spi@20100000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 172 0>;
+ clocks = <&k3_clks 141 0>;
status = "disabled";
};
@@ -317,7 +317,7 @@ main_spi1: spi@20110000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 173 0>;
+ clocks = <&k3_clks 142 0>;
status = "disabled";
};
@@ -328,7 +328,7 @@ main_spi2: spi@20120000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 174 0>;
+ clocks = <&k3_clks 143 0>;
status = "disabled";
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 034/885] arm64: tegra: Fix duplicate regulator on Jetson TX1
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 033/885] arm64: dts: ti: k3-am62-main: Fix clocks for McSPI Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 035/885] arm64: dts: msm8992-bullhead: add memory hole region Greg Kroah-Hartman
` (853 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Thierry Reding, Sasha Levin
From: Thierry Reding <treding@nvidia.com>
[ Upstream commit 29bcc1eaca315326d1cc883fbe9b451d1f9e3fa5 ]
When the top-level regulators were renamed, the 1.2V camera regulator
accidentally ended up with the same DT node name as the 1.8V camera
regulator.
Fixes: 097e01c61015 ("arm64: tegra: Rename top-level regulators")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index a44c56c1e56e5..634373a423ef6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1666,7 +1666,7 @@ vdd_hdmi: regulator-vdd-hdmi {
vin-supply = <&vdd_5v0_sys>;
};
- vdd_cam_1v2: regulator-vdd-cam-1v8 {
+ vdd_cam_1v2: regulator-vdd-cam-1v2 {
compatible = "regulator-fixed";
regulator-name = "vdd-cam-1v2";
regulator-min-microvolt = <1200000>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 035/885] arm64: dts: msm8992-bullhead: add memory hole region
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 034/885] arm64: tegra: Fix duplicate regulator on Jetson TX1 Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 036/885] arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size Greg Kroah-Hartman
` (852 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Petr Vorel, Dominik Kobinski,
Konrad Dybcio, Bjorn Andersson, Sasha Levin
From: Dominik Kobinski <dominikkobinski314@gmail.com>
[ Upstream commit 22c7e1a0fa45cd7d028d6b4117161fd0e3427fe0 ]
Add region for memory hole present on bullhead in order to
fix a reboot issue on recent kernels
Reported-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221211100501.82323-1-dominikkobinski314@gmail.com
Stable-dep-of: 26a91359aea4 ("arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
index 71e373b11de9d..37bcbbc67be51 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -2,6 +2,7 @@
/* Copyright (c) 2015, LGE Inc. All rights reserved.
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
* Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
*/
/dts-v1/;
@@ -50,6 +51,11 @@ cont_splash_mem: memory@3400000 {
reg = <0 0x03400000 0 0x1200000>;
no-map;
};
+
+ removed_region: reserved@5000000 {
+ reg = <0 0x05000000 0 0x2200000>;
+ no-map;
+ };
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 036/885] arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 035/885] arm64: dts: msm8992-bullhead: add memory hole region Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 037/885] arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_mem Greg Kroah-Hartman
` (851 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Petr Vorel, Konrad Dybcio,
Bjorn Andersson, Sasha Levin
From: Petr Vorel <petr.vorel@gmail.com>
[ Upstream commit 26a91359aea4d89e7d3646d806eed0f3755b74bd ]
Original google firmware reports 12 MiB:
[ 0.000000] cma: Found cont_splash_mem@0, memory base 0x0000000003400000, size 12 MiB, limit 0xffffffffffffffff
which is actually 12*1024*1024 = 0xc00000.
This matches the aosp source [1]:
&cont_splash_mem {
reg = <0 0x03400000 0 0xc00000>;
};
Fixes: 3cb6a271f4b0 ("arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping")
Fixes: 976d321f32dc ("arm64: dts: qcom: msm8992: Make the DT an overlay on top of 8994")
[1] https://android.googlesource.com/kernel/msm.git/+/android-7.0.0_r0.17/arch/arm64/boot/dts/lge/msm8992-bullhead.dtsi#141
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226185440.440968-2-pevik@seznam.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
index 37bcbbc67be51..97f109cf82400 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2015, LGE Inc. All rights reserved.
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
- * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
* Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
*/
@@ -48,7 +48,7 @@ ramoops@1ff00000 {
};
cont_splash_mem: memory@3400000 {
- reg = <0 0x03400000 0 0x1200000>;
+ reg = <0 0x03400000 0 0xc00000>;
no-map;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 037/885] arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_mem
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 036/885] arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 038/885] arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names Greg Kroah-Hartman
` (850 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Petr Vorel, Konrad Dybcio,
Bjorn Andersson, Sasha Levin
From: Petr Vorel <petr.vorel@gmail.com>
[ Upstream commit 4dee5aa44b924036511a744ceb3abb1ceeb96bb6 ]
It's disabled on downstream [1] thus not shown on downstream dmesg.
Removing it fixes warnings on v6.1:
[ 0.000000] OF: reserved mem: OVERLAP DETECTED!
[ 0.000000] dfps_data_mem@3400000 (0x0000000003400000--0x0000000003401000) overlaps with memory@3400000 (0x0000000003400000--0x0000000004600000)
[1] https://android.googlesource.com/kernel/msm.git/+/android-7.0.0_r0.17/arch/arm64/boot/dts/lge/msm8992-bullhead.dtsi#137
Fixes: 976d321f32dc ("arm64: dts: qcom: msm8992: Make the DT an overlay on top of 8994")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226185440.440968-3-pevik@seznam.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
index 97f109cf82400..49f30efdbe656 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -14,6 +14,9 @@
/* cont_splash_mem has different memory mapping */
/delete-node/ &cont_splash_mem;
+/* disabled on downstream, conflicts with cont_splash_mem */
+/delete-node/ &dfps_data_mem;
+
/ {
model = "LG Nexus 5X";
compatible = "lg,bullhead", "qcom,msm8992";
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 038/885] arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 037/885] arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_mem Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 039/885] arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY Greg Kroah-Hartman
` (849 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Robert Marko, Dmitry Baryshkov,
Bjorn Andersson, Sasha Levin
From: Robert Marko <robimarko@gmail.com>
[ Upstream commit 877cff3568c0f54511d77918ae16b2d6e9a0dfce ]
It seems that clock-output-names for the USB3 QMP PHY-s where set without
actually checking what is the GCC clock driver expecting, so clock core
could never actually find the parents for usb0_pipe_clk_src and
usb1_pipe_clk_src clocks in the GCC driver.
So, correct the names to be what the driver expects so that parenting
works.
Before:
gcc_usb0_pipe_clk_src 0 0 0 125000000 0 0 50000 Y
gcc_usb1_pipe_clk_src 0 0 0 125000000 0 0 50000 Y
After:
usb3phy_0_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y
usb0_pipe_clk_src 1 1 0 125000000 0 0 50000 Y
gcc_usb0_pipe_clk 1 1 0 125000000 0 0 50000 Y
usb3phy_1_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y
usb1_pipe_clk_src 1 1 0 125000000 0 0 50000 Y
gcc_usb1_pipe_clk 1 1 0 125000000 0 0 50000 Y
Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230108130440.670181-2-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a721cdd80489e..cde06bfc598bf 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -137,7 +137,7 @@ usb1_ssphy: phy@58200 {
#clock-cells = <0>;
clocks = <&gcc GCC_USB1_PIPE_CLK>;
clock-names = "pipe0";
- clock-output-names = "gcc_usb1_pipe_clk_src";
+ clock-output-names = "usb3phy_1_cc_pipe_clk";
};
};
@@ -180,7 +180,7 @@ usb0_ssphy: phy@78200 {
#clock-cells = <0>;
clocks = <&gcc GCC_USB0_PIPE_CLK>;
clock-names = "pipe0";
- clock-output-names = "gcc_usb0_pipe_clk_src";
+ clock-output-names = "usb3phy_0_cc_pipe_clk";
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 039/885] arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 038/885] arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 040/885] arm64: dts: qcom: ipq8074: fix Gen3 " Greg Kroah-Hartman
` (848 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Robert Marko, Bjorn Andersson, Sasha Levin
From: Robert Marko <robimarko@gmail.com>
[ Upstream commit 100d9c94ccf15b02742c326cd04f422ab729153b ]
Serdes register space sizes are incorrect, update them to match the
actual sizes from downstream QCA 5.4 kernel.
Fixes: 942bcd33ed45 ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-1-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index cde06bfc598bf..09ba99fc90ac4 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -242,9 +242,9 @@ pcie_qmp1: phy@8e000 {
status = "disabled";
pcie_phy1: phy@8e200 {
- reg = <0x8e200 0x16c>,
+ reg = <0x8e200 0x130>,
<0x8e400 0x200>,
- <0x8e800 0x4f4>;
+ <0x8e800 0x1f8>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 040/885] arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 039/885] arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 041/885] arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges Greg Kroah-Hartman
` (847 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Robert Marko, Bjorn Andersson, Sasha Levin
From: Robert Marko <robimarko@gmail.com>
[ Upstream commit 7ba33591b45f9d547a317e42f1c2acd19c925eb6 ]
IPQ8074 comes in 2 silicon versions:
* v1 with 2x Gen2 PCIe ports and QMP PHY-s
* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s
v2 is the final and production version that is actually supported by the
kernel, however it looks like PCIe related nodes were added for the v1 SoC.
Now that we have Gen3 QMP PHY support, we can start fixing the PCIe support
by fixing the Gen3 QMP PHY node first.
Change the compatible to the Gen3 QMP PHY, correct the register space start
and size, add the missing misc PCS register space.
Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-2-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 09ba99fc90ac4..2a3123827285e 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -197,9 +197,9 @@ qusb_phy_0: phy@79000 {
status = "disabled";
};
- pcie_qmp0: phy@86000 {
- compatible = "qcom,ipq8074-qmp-pcie-phy";
- reg = <0x00086000 0x1c4>;
+ pcie_qmp0: phy@84000 {
+ compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
+ reg = <0x00084000 0x1bc>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -213,10 +213,11 @@ pcie_qmp0: phy@86000 {
"common";
status = "disabled";
- pcie_phy0: phy@86200 {
- reg = <0x86200 0x16c>,
- <0x86400 0x200>,
- <0x86800 0x4f4>;
+ pcie_phy0: phy@84200 {
+ reg = <0x84200 0x16c>,
+ <0x84400 0x200>,
+ <0x84800 0x1f0>,
+ <0x84c00 0xf4>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 041/885] arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 040/885] arm64: dts: qcom: ipq8074: fix Gen3 " Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 042/885] arm64: dts: qcom: ipq8074: fix Gen3 PCIe node Greg Kroah-Hartman
` (846 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Robert Marko, Bjorn Andersson, Sasha Levin
From: Robert Marko <robimarko@gmail.com>
[ Upstream commit 2055cb7dccea16bafa3adf9c5e3216949512c34a ]
Current ranges property set in Gen2 PCIe node is incorrect, replace it
with the downstream 5.4 QCA kernel value.
Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-3-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2a3123827285e..d7d2da3bb4a6b 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -751,9 +751,9 @@ pcie1: pci@10000000 {
phy-names = "pciephy";
ranges = <0x81000000 0 0x10200000 0x10200000
- 0 0x100000 /* downstream I/O */
- 0x82000000 0 0x10300000 0x10300000
- 0 0xd00000>; /* non-prefetchable memory */
+ 0 0x10000>, /* downstream I/O */
+ <0x82000000 0 0x10220000 0x10220000
+ 0 0xfde0000>; /* non-prefetchable memory */
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 042/885] arm64: dts: qcom: ipq8074: fix Gen3 PCIe node
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 041/885] arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 043/885] arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names Greg Kroah-Hartman
` (845 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Robert Marko, Bjorn Andersson, Sasha Levin
From: Robert Marko <robimarko@gmail.com>
[ Upstream commit 3e83a9c41ab0244a45a4a2800b9adb8de0d15f82 ]
IPQ8074 comes in 2 silicon versions:
* v1 with 2x Gen2 PCIe ports and QMP PHY-s
* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s
v2 is the final and production version that is actually supported by the
kernel, however it looks like PCIe related nodes were added for the v1 SoC.
Finish the PCIe fixup by using the correct compatible, adding missing ATU
register space, declaring max-link-speed, use correct ranges, add missing
clocks and resets.
Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-8-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 30 +++++++++++++++------------
1 file changed, 17 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index d7d2da3bb4a6b..ae143159a8256 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -796,16 +796,18 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
};
pcie0: pci@20000000 {
- compatible = "qcom,pcie-ipq8074";
+ compatible = "qcom,pcie-ipq8074-gen3";
reg = <0x20000000 0xf1d>,
<0x20000f20 0xa8>,
- <0x00080000 0x2000>,
+ <0x20001000 0x1000>,
+ <0x00080000 0x4000>,
<0x20100000 0x1000>;
- reg-names = "dbi", "elbi", "parf", "config";
+ reg-names = "dbi", "elbi", "atu", "parf", "config";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
+ max-link-speed = <3>;
#address-cells = <3>;
#size-cells = <2>;
@@ -813,9 +815,9 @@ pcie0: pci@20000000 {
phy-names = "pciephy";
ranges = <0x81000000 0 0x20200000 0x20200000
- 0 0x100000 /* downstream I/O */
- 0x82000000 0 0x20300000 0x20300000
- 0 0xd00000>; /* non-prefetchable memory */
+ 0 0x10000>, /* downstream I/O */
+ <0x82000000 0 0x20220000 0x20220000
+ 0 0xfde0000>; /* non-prefetchable memory */
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
@@ -833,28 +835,30 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
<&gcc GCC_PCIE0_AXI_M_CLK>,
<&gcc GCC_PCIE0_AXI_S_CLK>,
- <&gcc GCC_PCIE0_AHB_CLK>,
- <&gcc GCC_PCIE0_AUX_CLK>;
-
+ <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+ <&gcc GCC_PCIE0_RCHNG_CLK>;
clock-names = "iface",
"axi_m",
"axi_s",
- "ahb",
- "aux";
+ "axi_bridge",
+ "rchng";
+
resets = <&gcc GCC_PCIE0_PIPE_ARES>,
<&gcc GCC_PCIE0_SLEEP_ARES>,
<&gcc GCC_PCIE0_CORE_STICKY_ARES>,
<&gcc GCC_PCIE0_AXI_MASTER_ARES>,
<&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
<&gcc GCC_PCIE0_AHB_ARES>,
- <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
+ <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
reset-names = "pipe",
"sleep",
"sticky",
"axi_m",
"axi_s",
"ahb",
- "axi_m_sticky";
+ "axi_m_sticky",
+ "axi_s_sticky";
status = "disabled";
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 043/885] arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 042/885] arm64: dts: qcom: ipq8074: fix Gen3 PCIe node Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 044/885] arm64: dts: meson: remove CPU opps below 1GHz for G12A boards Greg Kroah-Hartman
` (844 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Robert Marko, Bjorn Andersson, Sasha Levin
From: Robert Marko <robimarko@gmail.com>
[ Upstream commit 0e8b90c0256cf9c9589e2cee517dedc987a34355 ]
Current PCIe QMP PHY output name were changed in ("arm64: dts: qcom: Fix
IPQ8074 PCIe PHY nodes") however it did not account for the fact that GCC
driver is relying on the old names to match them as they are being used as
the parent for the gcc_pcie0_pipe_clk and gcc_pcie1_pipe_clk.
This broke parenting as GCC could not find the parent clock, so fix it by
changing to the names that driver is expecting.
Fixes: 942bcd33ed45 ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-9-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index ae143159a8256..05b97b05d4462 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -222,7 +222,7 @@ pcie_phy0: phy@84200 {
#clock-cells = <0>;
clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
clock-names = "pipe0";
- clock-output-names = "pcie_0_pipe_clk";
+ clock-output-names = "pcie20_phy0_pipe_clk";
};
};
@@ -250,7 +250,7 @@ pcie_phy1: phy@8e200 {
#clock-cells = <0>;
clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
clock-names = "pipe0";
- clock-output-names = "pcie_1_pipe_clk";
+ clock-output-names = "pcie20_phy1_pipe_clk";
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 044/885] arm64: dts: meson: remove CPU opps below 1GHz for G12A boards
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 043/885] arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 045/885] ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init() Greg Kroah-Hartman
` (843 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christian Hewitt, Neil Armstrong,
Sasha Levin
From: Christian Hewitt <christianshewitt@gmail.com>
[ Upstream commit 3cbd431c2b34d84605d358c8c57654193fd661fb ]
Amlogic G12A devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.
Fixes: b190056fa9ee ("arm64: dts: meson-g12a: add cpus OPP table")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20230119053031.21400-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 20 --------------------
1 file changed, 20 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index fb0ab27d1f642..6eaceb717d617 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -57,26 +57,6 @@ cpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <731000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <731000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <731000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <666666666>;
- opp-microvolt = <731000>;
- };
-
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <731000>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 045/885] ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 044/885] arm64: dts: meson: remove CPU opps below 1GHz for G12A boards Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 046/885] arm64: dts: mediatek: mt8192: Mark scp_adsp clock as broken Greg Kroah-Hartman
` (842 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hulk Robot, Yang Yingliang,
Tony Lindgren, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 0414a100d6ab32721efa70ab55524540fdfe0ede ]
If platform_device_add() is not called or failed, it should call
platform_device_put() in error case.
Fixes: 97933d6ced60 ("ARM: OMAP1: dmtimer: conversion to platform devices")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Message-Id: <20220701094602.2365099-1-yangyingliang@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-omap1/timer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index f5cd4bbf7566d..81a912c1145a9 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -158,7 +158,7 @@ static int __init omap1_dm_timer_init(void)
kfree(pdata);
err_free_pdev:
- platform_device_unregister(pdev);
+ platform_device_put(pdev);
return ret;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 046/885] arm64: dts: mediatek: mt8192: Mark scp_adsp clock as broken
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 045/885] ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init() Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 047/885] ARM: bcm2835_defconfig: Enable the framebuffer Greg Kroah-Hartman
` (841 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen-Yu Tsai,
Nícolas F . R . A . Prado, Matthias Brugger, Sasha Levin
From: Chen-Yu Tsai <wenst@chromium.org>
[ Upstream commit 089cd717e6ef03cf9cf7865777d67775de41339b ]
The scp_adsp clock controller is under the SCP_ADSP power domain. This
power domain is currently not supported nor defined.
Mark the clock controller as broken for now, to avoid the system from
trying to access it, and causing the CPU or bus to stall.
Fixes: 5d2b897bc6f5 ("arm64: dts: mediatek: Add mt8192 clock controllers")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221229101202.1655924-1-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 8163684a23f6e..7da221924e37c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -583,6 +583,8 @@ scp_adsp: clock-controller@10720000 {
compatible = "mediatek,mt8192-scp_adsp";
reg = <0 0x10720000 0 0x1000>;
#clock-cells = <1>;
+ /* power domain dependency not upstreamed */
+ status = "fail";
};
uart0: serial@11002000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 047/885] ARM: bcm2835_defconfig: Enable the framebuffer
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 046/885] arm64: dts: mediatek: mt8192: Mark scp_adsp clock as broken Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 048/885] ARM: s3c: fix s3c64xx_set_timer_source prototype Greg Kroah-Hartman
` (840 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stefan Wahren, Florian Fainelli,
Sasha Levin
From: Stefan Wahren <stefan.wahren@i2se.com>
[ Upstream commit afc8dd99840b7fb7190e769a893cda673bc3a907 ]
Booting Linux on a Raspberry Pi based on bcm2835_defconfig there is
no display activity.
Enable CONFIG_FB which is nowadays required for CONFIG_FB_SIMPLE
and CONFIG_FRAMEBUFFER_CONSOLE.
Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230113205842.17051-1-stefan.wahren@i2se.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/configs/bcm2835_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index a51babd178c26..be0c984a66947 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -107,6 +107,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_DRM=y
CONFIG_DRM_V3D=y
CONFIG_DRM_VC4=y
+CONFIG_FB=y
CONFIG_FB_SIMPLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_SOUND=y
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 048/885] ARM: s3c: fix s3c64xx_set_timer_source prototype
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 047/885] ARM: bcm2835_defconfig: Enable the framebuffer Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 049/885] arm64: dts: ti: k3-j7200: Fix wakeup pinmux range Greg Kroah-Hartman
` (839 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Krzysztof Kozlowski,
Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 5bf52f5e4d12b8109f348cab60cb7d51092c4270 ]
The prototype does not match the definition, as gcc-13 points
out:
arch/arm/mach-s3c/s3c64xx.c:169:13: error: conflicting types for 's3c64xx_set_timer_source' due to enum/integer mismatch; have 'void(unsigned int, unsigned int)' [-Werror=enum-int-mismatch]
169 | void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
| ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/arm/mach-s3c/s3c64xx.c:50:
arch/arm/mach-s3c/s3c64xx.h:62:20: note: previous declaration of 's3c64xx_set_timer_source' with type 'void(enum s3c64xx_timer_mode, enum s3c64xx_timer_mode)'
62 | extern void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 4280506ac9bb ("ARM: SAMSUNG: Move all platforms to new clocksource driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230118090224.2162863-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-s3c/s3c64xx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-s3c/s3c64xx.c b/arch/arm/mach-s3c/s3c64xx.c
index 0a8116c108fe4..dce2b0e953088 100644
--- a/arch/arm/mach-s3c/s3c64xx.c
+++ b/arch/arm/mach-s3c/s3c64xx.c
@@ -173,7 +173,8 @@ static struct samsung_pwm_variant s3c64xx_pwm_variant = {
.tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
};
-void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
+void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
+ enum s3c64xx_timer_mode source)
{
s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 049/885] arm64: dts: ti: k3-j7200: Fix wakeup pinmux range
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 048/885] ARM: s3c: fix s3c64xx_set_timer_source prototype Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 050/885] ARM: dts: exynos: correct wr-active property in Exynos3250 Rinato Greg Kroah-Hartman
` (838 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vaishnav Achath, Jayesh Choudhary,
Vignesh Raghavendra, Sasha Levin
From: Vaishnav Achath <vaishnav.a@ti.com>
[ Upstream commit 9ae21ac445e911e3541985c20052fc05d60f6879 ]
The WKUP_PADCONFIG register region in J7200 has multiple non-addressable
regions, split the existing wkup_pmx region as follows to avoid the
non-addressable regions and include all valid WKUP_PADCONFIG registers.
Also update references to old nodes with new ones.
wkup_pmx0 -> 13 pins (WKUP_PADCONFIG 0 - 12)
wkup_pmx1 -> 2 pins (WKUP_PADCONFIG 14 - 15)
wkup_pmx2 -> 59 pins (WKUP_PADCONFIG 26 - 84)
wkup_pmx3 -> 8 pins (WKUP_PADCONFIG 93 - 100)
J7200 Datasheet (Table 6-106, Section 6.4 Pin Multiplexing) :
https://www.ti.com/lit/ds/symlink/dra821u.pdf
Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230119042622.22310-1-vaishnav.a@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../dts/ti/k3-j7200-common-proc-board.dts | 2 +-
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 29 ++++++++++++++++++-
2 files changed, 29 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 7e8552fd2b6ae..50009f963a324 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -80,7 +80,7 @@ vdd_sd_dv: gpio-regulator-TLV71033 {
};
};
-&wkup_pmx0 {
+&wkup_pmx2 {
mcu_cpsw_pins_default: mcu-cpsw-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index d3fb86b2ea939..f04c6c890c33d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -56,7 +56,34 @@ chipid@43000014 {
wkup_pmx0: pinctrl@4301c000 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
- reg = <0x00 0x4301c000 0x00 0x178>;
+ reg = <0x00 0x4301c000 0x00 0x34>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ wkup_pmx1: pinctrl@0x4301c038 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x4301c038 0x00 0x8>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ wkup_pmx2: pinctrl@0x4301c068 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x4301c068 0x00 0xec>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ wkup_pmx3: pinctrl@0x4301c174 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x4301c174 0x00 0x20>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 050/885] ARM: dts: exynos: correct wr-active property in Exynos3250 Rinato
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 049/885] arm64: dts: ti: k3-j7200: Fix wakeup pinmux range Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 051/885] ARM: imx: Call ida_simple_remove() for ida_simple_get Greg Kroah-Hartman
` (837 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit d15d2a617499882971ddb773a583015bf36fa492 ]
The property is wr-active:
exynos3250-rinato.dtb: fimd@11c00000: i80-if-timings: 'wr-act' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: b59b3afb94d4 ("ARM: dts: add fimd device support for exynos3250-rinato")
Link: https://lore.kernel.org/r/20230120155404.323386-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos3250-rinato.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 6d2c7bb191842..2eb682009815a 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -250,7 +250,7 @@ &fimd {
i80-if-timings {
cs-setup = <0>;
wr-setup = <0>;
- wr-act = <1>;
+ wr-active = <1>;
wr-hold = <0>;
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 051/885] ARM: imx: Call ida_simple_remove() for ida_simple_get
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 050/885] ARM: dts: exynos: correct wr-active property in Exynos3250 Rinato Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 052/885] arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name Greg Kroah-Hartman
` (836 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Angus Chen, Shawn Guo, Sasha Levin
From: Angus Chen <angus.chen@jaguarmicro.com>
[ Upstream commit ebeb49f43c8952f12aa20f03f00d7009edc2d1c5 ]
The function call ida_simple_get maybe fail,we should deal with it.
And if ida_simple_get success ,it need to call ida_simple_remove also.
BTW,devm_kasprintf can handle id is zero for consistency.
Fixes: e76bdfd7403a ("ARM: imx: Added perf functionality to mmdc driver")
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-imx/mmdc.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index af12668d0bf51..b9efe9da06e0b 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -99,6 +99,7 @@ struct mmdc_pmu {
cpumask_t cpu;
struct hrtimer hrtimer;
unsigned int active_events;
+ int id;
struct device *dev;
struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
struct hlist_node node;
@@ -433,8 +434,6 @@ static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer)
static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
void __iomem *mmdc_base, struct device *dev)
{
- int mmdc_num;
-
*pmu_mmdc = (struct mmdc_pmu) {
.pmu = (struct pmu) {
.task_ctx_nr = perf_invalid_context,
@@ -452,15 +451,16 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
.active_events = 0,
};
- mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
+ pmu_mmdc->id = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
- return mmdc_num;
+ return pmu_mmdc->id;
}
static int imx_mmdc_remove(struct platform_device *pdev)
{
struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev);
+ ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
perf_pmu_unregister(&pmu_mmdc->pmu);
iounmap(pmu_mmdc->mmdc_base);
@@ -474,7 +474,6 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
{
struct mmdc_pmu *pmu_mmdc;
char *name;
- int mmdc_num;
int ret;
const struct of_device_id *of_id =
of_match_device(imx_mmdc_dt_ids, &pdev->dev);
@@ -497,14 +496,14 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
cpuhp_mmdc_state = ret;
}
- mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
- pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
- if (mmdc_num == 0)
- name = "mmdc";
- else
- name = devm_kasprintf(&pdev->dev,
- GFP_KERNEL, "mmdc%d", mmdc_num);
+ ret = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
+ if (ret < 0)
+ goto pmu_free;
+ name = devm_kasprintf(&pdev->dev,
+ GFP_KERNEL, "mmdc%d", ret);
+
+ pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
@@ -525,6 +524,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
pmu_register_err:
pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
+ ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
hrtimer_cancel(&pmu_mmdc->hrtimer);
pmu_free:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 052/885] arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 051/885] ARM: imx: Call ida_simple_remove() for ida_simple_get Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 053/885] arm64: dts: amlogic: meson-axg: " Greg Kroah-Hartman
` (835 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit 127f79212b07c5d9a6657a87e3eafdd889335814 ]
Fixes:
scpi: clocks: 'clock-controller' does not match any of the regexes: '^clocks-[0-9a-f]+$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-1-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 3a53398176b35..93e4190e5d88f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -249,7 +249,7 @@ scpi {
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
- scpi_dvfs: clock-controller {
+ scpi_dvfs: clocks-0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 053/885] arm64: dts: amlogic: meson-axg: fix SCPI clock dvfs node name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 052/885] arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 054/885] arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible Greg Kroah-Hartman
` (834 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit 5b7069d72f03c92a0ab919725017394ebce03a81 ]
Fixes:
scpi: clocks: 'clock-controller' does not match any of the regexes: '^clocks-[0-9a-f]+$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-2-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 73cd1791a13fa..3885eccf6da42 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -152,7 +152,7 @@ scpi {
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
- scpi_dvfs: clock-controller {
+ scpi_dvfs: clocks-0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 054/885] arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 053/885] arm64: dts: amlogic: meson-axg: " Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 055/885] arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix supply name of USB controller node Greg Kroah-Hartman
` (833 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit 2ff650051493d5bdb6dd09d4c2850bb37db6be31 ]
Fixes:
scpi: sensors:compatible: 'oneOf' conditional failed, one must be fixed:
['amlogic,meson-gxbb-scpi-sensors'] is too short
'arm,scpi-sensors' was expected
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-3-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 3885eccf6da42..6cc685f91fc94 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -161,7 +161,7 @@ scpi_dvfs: clocks-0 {
};
scpi_sensors: sensors {
- compatible = "amlogic,meson-gxbb-scpi-sensors";
+ compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 055/885] arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix supply name of USB controller node
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 054/885] arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 056/885] arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names property Greg Kroah-Hartman
` (832 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit a69cb1042cea840bc7b60fea1c26a6b259e68bf2 ]
Fixes:
usb@ffe09080: 'phy-supply' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-4-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
index 22fd43b5fd73c..1916c007cba58 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -303,7 +303,7 @@ &uart_AO_B {
&usb {
status = "okay";
- phy-supply = <&usb_pwr>;
+ vbus-supply = <&usb_pwr>;
};
&spicc1 {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 056/885] arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names property
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 055/885] arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix supply name of USB controller node Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 057/885] arm64: dts: amlogic: meson-gx: add missing unit address to rng node name Greg Kroah-Hartman
` (831 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit e3bd275ccbacf5eb18eaa311cea39f8bf8655feb ]
Fixes:
bluetooth: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-5-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
index b331a013572f3..c490dbbf063bf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
@@ -79,6 +79,5 @@ bluetooth {
enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;
- clock-names = "lpo";
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 057/885] arm64: dts: amlogic: meson-gx: add missing unit address to rng node name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 056/885] arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names property Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 058/885] arm64: dts: amlogic: meson-gxl-s905w-jethome-jethub-j80: fix invalid rtc " Greg Kroah-Hartman
` (830 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit 61ff70708b98a85516eccb3755084ac97b42cf48 ]
Fixes:
bus@c8834000: rng: {...} should not be valid under {'type': 'object'}
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-6-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 93e4190e5d88f..80d86780cb6ba 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -531,7 +531,7 @@ periphs: bus@c8834000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
- hwrng: rng {
+ hwrng: rng@0 {
compatible = "amlogic,meson-rng";
reg = <0x0 0x0 0x0 0x4>;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 058/885] arm64: dts: amlogic: meson-gxl-s905w-jethome-jethub-j80: fix invalid rtc node name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 057/885] arm64: dts: amlogic: meson-gx: add missing unit address to rng node name Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 059/885] arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: " Greg Kroah-Hartman
` (829 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit 11172a97c092eaeb0a65c6434df0fc73f886a495 ]
Fixes:
pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-[0-9a-f])*$'
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-7-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index bb7412070cb26..a18d6d241a5ad 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -239,7 +239,7 @@ &i2c_B {
pinctrl-names = "default";
pinctrl-0 = <&i2c_b_pins>;
- pcf8563: pcf8563@51 {
+ pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
status = "okay";
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 059/885] arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix invalid rtc node name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 058/885] arm64: dts: amlogic: meson-gxl-s905w-jethome-jethub-j80: fix invalid rtc " Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 060/885] arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux " Greg Kroah-Hartman
` (828 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit 956f52025c5dd92c80c12e31c99c854086a6fc55 ]
Fixes:
pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-[0-9a-f])*$'
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-8-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
index 1916c007cba58..e1605a9b0a13f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -217,7 +217,7 @@ &i2c1 {
pinctrl-names = "default";
/* RTC */
- pcf8563: pcf8563@51 {
+ pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
status = "okay";
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 060/885] arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 059/885] arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: " Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 061/885] arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name Greg Kroah-Hartman
` (827 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit d19189f70ba596798ea49166d2d1ef36a8df5289 ]
Fixes:
bus@c8834000: eth-phy-mux: {...} should not be valid under {'type': 'object'}
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-9-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index c3ac531c4f84a..3500229350522 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -759,7 +759,7 @@ mux {
};
};
- eth-phy-mux {
+ eth-phy-mux@55c {
compatible = "mdio-mux-mmioreg", "mdio-mux";
#address-cells = <1>;
#size-cells = <0>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 061/885] arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 060/885] arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux " Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 062/885] arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names Greg Kroah-Hartman
` (826 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit 6bb506ed36968207a8832f0143ebc127f0770eef ]
Fixes:
adc-keys: 'update-button' does not match any of the regexes: '^button-', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-10-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index bcdf55f48a831..4e84ab87cc7db 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -17,7 +17,7 @@ adc-keys {
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
- update-button {
+ button-update {
label = "update";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <1300000>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 062/885] arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 061/885] arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 063/885] arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name Greg Kroah-Hartman
` (825 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit d519a73332b6c3d14e15f8fd20d7c6f29ed13d41 ]
Fixes:
adc_keys: 'key' does not match any of the regexes: '^button-', 'pinctrl-[0-9]+'
Also fix the invalid "adc_keys" node name.
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-11-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index cadba194b149b..6d0db667581fa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -17,13 +17,13 @@ / {
compatible = "bananapi,bpi-m5", "amlogic,sm1";
model = "Banana Pi BPI-M5";
- adc_keys {
+ adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 2>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
- key {
+ button-sw3 {
label = "SW3";
linux,code = <BTN_3>;
press-threshold-microvolt = <1700000>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 063/885] arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 062/885] arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 064/885] arm64: dts: amlogic: meson-gxbb-kii-pro: " Greg Kroah-Hartman
` (824 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit eee64d8fbbdaab72bbab3e462f3a7b742d20c8c2 ]
Fixes:
leds: status: {...} is not of type 'array'
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-12-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
index 9ef210f17b4aa..393d3cb33b9ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
@@ -18,7 +18,7 @@ cvbs-connector {
leds {
compatible = "gpio-leds";
- status {
+ led {
label = "n1:white:status";
gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
default-state = "on";
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 064/885] arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 063/885] arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 065/885] arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip Greg Kroah-Hartman
` (823 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit afdef3b188c934f79ad4b0a7bd8c692742f9b5af ]
Fixes:
leds: status: {...} is not of type 'array'
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-13-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 6d8cc00fedc7f..5f2d4317ecfbf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -16,7 +16,7 @@ / {
leds {
compatible = "gpio-leds";
- status {
+ led {
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
default-state = "off";
color = <LED_COLOR_ID_RED>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 065/885] arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 064/885] arm64: dts: amlogic: meson-gxbb-kii-pro: " Greg Kroah-Hartman
@ 2023-03-07 16:49 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 066/885] locking/rwsem: Disable preemption in all down_read*() and up_read() code paths Greg Kroah-Hartman
` (822 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:49 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ricardo Pardini, Neil Armstrong,
Sasha Levin
From: Neil Armstrong <neil.armstrong@linaro.org>
[ Upstream commit 1d2f14117aa7773efff50f832b85fc7779e586e0 ]
Add an active trip tied to the on-board fan cooling device, which is better
than describing it along the passive cooling maps.
Fixes: 33b14f663df8 ("arm64: dts: meson: add initial device-tree for ODROID-HC4")
Reported-by: Ricardo Pardini <ricardo@pardini.net>
Link: https://lore.kernel.org/r/20230124-topic-odroid-hc4-upstream-fix-fan-trip-v1-1-b0c6aa355d93@linaro.org
Tested-by: Ricardo Pardini <ricardo@pardini.net>
[narmstrong: added Ricardo's tested-by from off-list chat]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index e3486f60645a4..3d642d739c359 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -76,9 +76,17 @@ sound {
};
&cpu_thermal {
+ trips {
+ cpu_active: cpu-active {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+ };
+
cooling-maps {
map {
- trip = <&cpu_passive>;
+ trip = <&cpu_active>;
cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 066/885] locking/rwsem: Disable preemption in all down_read*() and up_read() code paths
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2023-03-07 16:49 ` [PATCH 6.1 065/885] arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 067/885] arm64: dts: renesas: beacon-renesom: Fix gpio expander reference Greg Kroah-Hartman
` (821 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mukesh Ojha, Peter Zijlstra,
Waiman Long, Ingo Molnar, Sasha Levin
From: Waiman Long <longman@redhat.com>
[ Upstream commit 3f5245538a1964ae186ab7e1636020a41aa63143 ]
Commit:
91d2a812dfb9 ("locking/rwsem: Make handoff writer optimistically spin on owner")
... assumes that when the owner field is changed to NULL, the lock will
become free soon. But commit:
48dfb5d2560d ("locking/rwsem: Disable preemption while trying for rwsem lock")
... disabled preemption when acquiring rwsem for write.
However, preemption has not yet been disabled when acquiring a read lock
on a rwsem. So a reader can add a RWSEM_READER_BIAS to count without
setting owner to signal a reader, got preempted out by a RT task which
then spins in the writer slowpath as owner remains NULL leading to live lock.
One easy way to fix this problem is to disable preemption at all the
down_read*() and up_read() code paths as implemented in this patch.
Fixes: 91d2a812dfb9 ("locking/rwsem: Make handoff writer optimistically spin on owner")
Reported-by: Mukesh Ojha <quic_mojha@quicinc.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126003628.365092-3-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/locking/rwsem.c | 30 ++++++++++++++++++++++++------
1 file changed, 24 insertions(+), 6 deletions(-)
diff --git a/kernel/locking/rwsem.c b/kernel/locking/rwsem.c
index 44873594de031..324fc370b6a68 100644
--- a/kernel/locking/rwsem.c
+++ b/kernel/locking/rwsem.c
@@ -1092,7 +1092,7 @@ rwsem_down_read_slowpath(struct rw_semaphore *sem, long count, unsigned int stat
/* Ordered by sem->wait_lock against rwsem_mark_wake(). */
break;
}
- schedule();
+ schedule_preempt_disabled();
lockevent_inc(rwsem_sleep_reader);
}
@@ -1254,14 +1254,20 @@ static struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem)
*/
static inline int __down_read_common(struct rw_semaphore *sem, int state)
{
+ int ret = 0;
long count;
+ preempt_disable();
if (!rwsem_read_trylock(sem, &count)) {
- if (IS_ERR(rwsem_down_read_slowpath(sem, count, state)))
- return -EINTR;
+ if (IS_ERR(rwsem_down_read_slowpath(sem, count, state))) {
+ ret = -EINTR;
+ goto out;
+ }
DEBUG_RWSEMS_WARN_ON(!is_rwsem_reader_owned(sem), sem);
}
- return 0;
+out:
+ preempt_enable();
+ return ret;
}
static inline void __down_read(struct rw_semaphore *sem)
@@ -1281,19 +1287,23 @@ static inline int __down_read_killable(struct rw_semaphore *sem)
static inline int __down_read_trylock(struct rw_semaphore *sem)
{
+ int ret = 0;
long tmp;
DEBUG_RWSEMS_WARN_ON(sem->magic != sem, sem);
+ preempt_disable();
tmp = atomic_long_read(&sem->count);
while (!(tmp & RWSEM_READ_FAILED_MASK)) {
if (atomic_long_try_cmpxchg_acquire(&sem->count, &tmp,
tmp + RWSEM_READER_BIAS)) {
rwsem_set_reader_owned(sem);
- return 1;
+ ret = 1;
+ break;
}
}
- return 0;
+ preempt_enable();
+ return ret;
}
/*
@@ -1335,6 +1345,7 @@ static inline void __up_read(struct rw_semaphore *sem)
DEBUG_RWSEMS_WARN_ON(sem->magic != sem, sem);
DEBUG_RWSEMS_WARN_ON(!is_rwsem_reader_owned(sem), sem);
+ preempt_disable();
rwsem_clear_reader_owned(sem);
tmp = atomic_long_add_return_release(-RWSEM_READER_BIAS, &sem->count);
DEBUG_RWSEMS_WARN_ON(tmp < 0, sem);
@@ -1343,6 +1354,7 @@ static inline void __up_read(struct rw_semaphore *sem)
clear_nonspinnable(sem);
rwsem_wake(sem);
}
+ preempt_enable();
}
/*
@@ -1662,6 +1674,12 @@ void down_read_non_owner(struct rw_semaphore *sem)
{
might_sleep();
__down_read(sem);
+ /*
+ * The owner value for a reader-owned lock is mostly for debugging
+ * purpose only and is not critical to the correct functioning of
+ * rwsem. So it is perfectly fine to set it in a preempt-enabled
+ * context here.
+ */
__rwsem_set_reader_owned(sem, NULL);
}
EXPORT_SYMBOL(down_read_non_owner);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 067/885] arm64: dts: renesas: beacon-renesom: Fix gpio expander reference
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 066/885] locking/rwsem: Disable preemption in all down_read*() and up_read() code paths Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 068/885] arm64: dts: meson: radxa-zero: allow usb otg mode Greg Kroah-Hartman
` (820 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Adam Ford, Geert Uytterhoeven, Sasha Levin
From: Adam Ford <aford173@gmail.com>
[ Upstream commit d7f9492dfc03153ac56ab59066a196558748f575 ]
The board used to originally introduce the Beacon Embedded RZ/G2[M/N/H]
boards had a GPIO expander with address 20, but this was changed when
the final board went to production.
The production boards changed both the part itself and the address.
With the incorrect address, the LCD cannot come up. If the LCD fails,
the rcar-du driver fails to come up, and that also breaks HDMI.
Pre-release board were not shipped to the general public, so it should
be safe to push this as a fix. Anyone with a production board would
have video fail due to this GPIO expander change.
Fixes: a1d8a344f1ca ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230114225647.227972-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../dts/renesas/beacon-renesom-baseboard.dtsi | 24 ++++++++-----------
1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 8166e3c1ff4e5..cafde91b4721b 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -437,20 +437,6 @@ wm8962_endpoint: endpoint {
};
};
- /* 0 - lcd_reset */
- /* 1 - lcd_pwr */
- /* 2 - lcd_select */
- /* 3 - backlight-enable */
- /* 4 - Touch_shdwn */
- /* 5 - LCD_H_pol */
- /* 6 - lcd_V_pol */
- gpio_exp1: gpio@20 {
- compatible = "onnn,pca9654";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
touchscreen@26 {
compatible = "ilitek,ili2117";
reg = <0x26>;
@@ -482,6 +468,16 @@ hd3ss3220_out_ep: endpoint {
};
};
};
+
+ gpio_exp1: gpio@70 {
+ compatible = "nxp,pca9538";
+ reg = <0x70>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "lcd_reset", "lcd_pwr", "lcd_select",
+ "backlight-enable", "Touch_shdwn",
+ "LCD_H_pol", "lcd_V_pol";
+ };
};
&lvds0 {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 068/885] arm64: dts: meson: radxa-zero: allow usb otg mode
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 067/885] arm64: dts: renesas: beacon-renesom: Fix gpio expander reference Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 069/885] arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN Greg Kroah-Hartman
` (819 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christian Hewitt, Neil Armstrong,
Sasha Levin
From: Christian Hewitt <christianshewitt@gmail.com>
[ Upstream commit ce43ea00b927805c1fd0450ccc9b4b6069e292c5 ]
Setting dr_mode to "host" prevents otg which can be useful on a board
with limited connectivity options. So don't force host mode.
Fixes: 26d1400f7457 ("arm64: dts: amlogic: add support for Radxa Zero")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127103913.3386435-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
index e3bb6df42ff3e..cf0a9be83fc47 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
@@ -401,5 +401,4 @@ &uart_AO {
&usb {
status = "okay";
- dr_mode = "host";
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 069/885] arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 068/885] arm64: dts: meson: radxa-zero: allow usb otg mode Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 070/885] ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference Greg Kroah-Hartman
` (818 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Christian Hewitt,
Sasha Levin
From: Christian Hewitt <christianshewitt@gmail.com>
[ Upstream commit 856968e066bd77b113965f1a355ec7401edff65f ]
For proper warm (re)boot from SD card the BPI-M5 board requires TFLASH_VDD_EN
and VDDIO_C pins to be switched to high impedance mode. This can be achieved
using OPEN_DRAIN instead of ACTIVE_HIGH to leave the GPIO pins in input mode
and retain high state (pin has the pull-up).
This change is inspired by meson-sm1-odroid.dtsi where OPEN_DRAIN has been
used to resolve similar problems with the Odroid C4 board (TF_IO in the C4
dts is the equivalent regulator).
Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index 6d0db667581fa..38ebe98ba9c6b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -123,7 +123,7 @@ vddio_c: regulator-vddio_c {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
- enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
enable-active-high;
regulator-always-on;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 070/885] ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 069/885] arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 071/885] ublk_drv: remove nr_aborted_queues from ublk_device Greg Kroah-Hartman
` (817 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andre Przywara, Jernej Skrabec,
Samuel Holland, Sasha Levin
From: Samuel Holland <samuel@sholland.org>
[ Upstream commit 2177d4ae971f79b4a9a3c411f2fb8ae6113d1430 ]
The property named in the schema is 'enable-gpios', not 'enable-gpio'.
This makes no difference at runtime, because the regulator is marked as
always-on, but it breaks validation.
Fixes: 4701fc6e5dd9 ("ARM: dts: sun8i: add FriendlyARM NanoPi Duo2")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231225854.16320-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
index 43641cb82398f..343b02b971555 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -57,7 +57,7 @@ reg_vdd_cpux: vdd-cpux-regulator {
regulator-ramp-delay = <50>; /* 4ms */
enable-active-high;
- enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
gpios-states = <0x1>;
states = <1100000 0>, <1300000 1>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 071/885] ublk_drv: remove nr_aborted_queues from ublk_device
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 070/885] ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 072/885] ublk_drv: dont probe partitions if the ubq daemon isnt trusted Greg Kroah-Hartman
` (816 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, ZiyangZhang, Ming Lei, Jens Axboe,
Sasha Levin
From: Ming Lei <ming.lei@redhat.com>
[ Upstream commit ed878d1c1c641c4a6bd366658fc8e6bc842b80d1 ]
No one uses 'nr_aborted_queues' any more, so remove it.
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230106041711.914434-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 73a166d97492 ("ublk_drv: don't probe partitions if the ubq daemon isn't trusted")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/ublk_drv.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 6368b56eacf11..f44b9467720c9 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -159,7 +159,6 @@ struct ublk_device {
struct completion completion;
unsigned int nr_queues_ready;
- atomic_t nr_aborted_queues;
/*
* Our ubq->daemon may be killed without any notification, so
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 072/885] ublk_drv: dont probe partitions if the ubq daemon isnt trusted
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 071/885] ublk_drv: remove nr_aborted_queues from ublk_device Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 073/885] ARM: dts: imx7s: correct iomuxc gpr mux controller cells Greg Kroah-Hartman
` (815 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, ZiyangZhang, Ming Lei, Jens Axboe,
Sasha Levin
From: Ming Lei <ming.lei@redhat.com>
[ Upstream commit 73a166d9749230d598320fdae3b687cdc0e2e205 ]
If any ubq daemon is unprivileged, the ublk char device is allowed
for unprivileged user actually, and we can't trust the current user,
so not probe partitions.
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230106041711.914434-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/ublk_drv.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index f44b9467720c9..450bd54fd0061 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -159,6 +159,7 @@ struct ublk_device {
struct completion completion;
unsigned int nr_queues_ready;
+ unsigned int nr_privileged_daemon;
/*
* Our ubq->daemon may be killed without any notification, so
@@ -1178,6 +1179,9 @@ static void ublk_mark_io_ready(struct ublk_device *ub, struct ublk_queue *ubq)
ubq->ubq_daemon = current;
get_task_struct(ubq->ubq_daemon);
ub->nr_queues_ready++;
+
+ if (capable(CAP_SYS_ADMIN))
+ ub->nr_privileged_daemon++;
}
if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues)
complete_all(&ub->completion);
@@ -1534,6 +1538,10 @@ static int ublk_ctrl_start_dev(struct io_uring_cmd *cmd)
if (ret)
goto out_put_disk;
+ /* don't probe partitions if any one ubq daemon is un-trusted */
+ if (ub->nr_privileged_daemon != ub->nr_queues_ready)
+ set_bit(GD_SUPPRESS_PART_SCAN, &disk->state);
+
get_device(&ub->cdev_dev);
ret = add_disk(disk);
if (ret) {
@@ -1935,6 +1943,7 @@ static int ublk_ctrl_start_recovery(struct io_uring_cmd *cmd)
/* set to NULL, otherwise new ubq_daemon cannot mmap the io_cmd_buf */
ub->mm = NULL;
ub->nr_queues_ready = 0;
+ ub->nr_privileged_daemon = 0;
init_completion(&ub->completion);
ret = 0;
out_unlock:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 073/885] ARM: dts: imx7s: correct iomuxc gpr mux controller cells
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 072/885] ublk_drv: dont probe partitions if the ubq daemon isnt trusted Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 074/885] sbitmap: remove redundant check in __sbitmap_queue_get_batch Greg Kroah-Hartman
` (814 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peng Fan, Marco Felsch, Shawn Guo,
Sasha Levin
From: Peng Fan <peng.fan@nxp.com>
[ Upstream commit 0e3e1946606a2919b1dda9967ab2e1c5af2fedd6 ]
Per binding doc reg-mux.yaml, the #mux-control-cells should be 1
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Fixes: 94a905a79f2c ("ARM: dts: imx7s: add multiplexer controls")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx7s.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 0fc9e6b8b05dc..11b9321badc51 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -513,7 +513,7 @@ gpr: iomuxc-gpr@30340000 {
mux: mux-controller {
compatible = "mmio-mux";
- #mux-control-cells = <0>;
+ #mux-control-cells = <1>;
mux-reg-masks = <0x14 0x00000010>;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 074/885] sbitmap: remove redundant check in __sbitmap_queue_get_batch
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 073/885] ARM: dts: imx7s: correct iomuxc gpr mux controller cells Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 075/885] sbitmap: Use single per-bitmap counting to wake up queued tags Greg Kroah-Hartman
` (813 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jan Kara, Kemeng Shi, Jens Axboe,
Sasha Levin
From: Kemeng Shi <shikemeng@huaweicloud.com>
[ Upstream commit 903e86f3a64d9573352bbab2f211fdbbaa5772b7 ]
Commit fbb564a557809 ("lib/sbitmap: Fix invalid loop in
__sbitmap_queue_get_batch()") mentioned that "Checking free bits when
setting the target bits. Otherwise, it may reuse the busying bits."
This commit add check to make sure all masked bits in word before
cmpxchg is zero. Then the existing check after cmpxchg to check any
zero bit is existing in masked bits in word is redundant.
Actually, old value of word before cmpxchg is stored in val and we
will filter out busy bits in val by "(get_mask & ~val)" after cmpxchg.
So we will not reuse busy bits methioned in commit fbb564a557809
("lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()"). Revert
new-added check to remove redundant check.
Fixes: fbb564a55780 ("lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230116205059.3821738-3-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/sbitmap.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/lib/sbitmap.c b/lib/sbitmap.c
index 7280ae8ca88c7..ca099fbc6f3c9 100644
--- a/lib/sbitmap.c
+++ b/lib/sbitmap.c
@@ -537,11 +537,9 @@ unsigned long __sbitmap_queue_get_batch(struct sbitmap_queue *sbq, int nr_tags,
get_mask = ((1UL << nr_tags) - 1) << nr;
val = READ_ONCE(map->word);
- do {
- if ((val & ~get_mask) != val)
- goto next;
- } while (!atomic_long_try_cmpxchg(ptr, &val,
- get_mask | val));
+ while (!atomic_long_try_cmpxchg(ptr, &val,
+ get_mask | val))
+ ;
get_mask = (get_mask & ~val) >> nr;
if (get_mask) {
*offset = nr + (index << sb->shift);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 075/885] sbitmap: Use single per-bitmap counting to wake up queued tags
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 074/885] sbitmap: remove redundant check in __sbitmap_queue_get_batch Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 076/885] sbitmap: correct wake_batch recalculation to avoid potential IO hung Greg Kroah-Hartman
` (812 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hugh Dickins, Keith Busch, Liu Song,
Jan Kara, Gabriel Krisman Bertazi, Jens Axboe, Sasha Levin
From: Gabriel Krisman Bertazi <krisman@suse.de>
[ Upstream commit 4f8126bb2308066b877859e4b5923ffb54143630 ]
sbitmap suffers from code complexity, as demonstrated by recent fixes,
and eventual lost wake ups on nested I/O completion. The later happens,
from what I understand, due to the non-atomic nature of the updates to
wait_cnt, which needs to be subtracted and eventually reset when equal
to zero. This two step process can eventually miss an update when a
nested completion happens to interrupt the CPU in between the wait_cnt
updates. This is very hard to fix, as shown by the recent changes to
this code.
The code complexity arises mostly from the corner cases to avoid missed
wakes in this scenario. In addition, the handling of wake_batch
recalculation plus the synchronization with sbq_queue_wake_up is
non-trivial.
This patchset implements the idea originally proposed by Jan [1], which
removes the need for the two-step updates of wait_cnt. This is done by
tracking the number of completions and wakeups in always increasing,
per-bitmap counters. Instead of having to reset the wait_cnt when it
reaches zero, we simply keep counting, and attempt to wake up N threads
in a single wait queue whenever there is enough space for a batch.
Waking up less than batch_wake shouldn't be a problem, because we
haven't changed the conditions for wake up, and the existing batch
calculation guarantees at least enough remaining completions to wake up
a batch for each queue at any time.
Performance-wise, one should expect very similar performance to the
original algorithm for the case where there is no queueing. In both the
old algorithm and this implementation, the first thing is to check
ws_active, which bails out if there is no queueing to be managed. In the
new code, we took care to avoid accounting completions and wakeups when
there is no queueing, to not pay the cost of atomic operations
unnecessarily, since it doesn't skew the numbers.
For more interesting cases, where there is queueing, we need to take
into account the cross-communication of the atomic operations. I've
been benchmarking by running parallel fio jobs against a single hctx
nullb in different hardware queue depth scenarios, and verifying both
IOPS and queueing.
Each experiment was repeated 5 times on a 20-CPU box, with 20 parallel
jobs. fio was issuing fixed-size randwrites with qd=64 against nullb,
varying only the hardware queue length per test.
queue size 2 4 8 16 32 64
6.1-rc2 1681.1K (1.6K) 2633.0K (12.7K) 6940.8K (16.3K) 8172.3K (617.5K) 8391.7K (367.1K) 8606.1K (351.2K)
patched 1721.8K (15.1K) 3016.7K (3.8K) 7543.0K (89.4K) 8132.5K (303.4K) 8324.2K (230.6K) 8401.8K (284.7K)
The following is a similar experiment, ran against a nullb with a single
bitmap shared by 20 hctx spread across 2 NUMA nodes. This has 40
parallel fio jobs operating on the same device
queue size 2 4 8 16 32 64
6.1-rc2 1081.0K (2.3K) 957.2K (1.5K) 1699.1K (5.7K) 6178.2K (124.6K) 12227.9K (37.7K) 13286.6K (92.9K)
patched 1081.8K (2.8K) 1316.5K (5.4K) 2364.4K (1.8K) 6151.4K (20.0K) 11893.6K (17.5K) 12385.6K (18.4K)
It has also survived blktests and a 12h-stress run against nullb. I also
ran the code against nvme and a scsi SSD, and I didn't observe
performance regression in those. If there are other tests you think I
should run, please let me know and I will follow up with results.
[1] https://lore.kernel.org/all/aef9de29-e9f5-259a-f8be-12d1b734e72@google.com/
Cc: Hugh Dickins <hughd@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Liu Song <liusong@linux.alibaba.com>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20221105231055.25953-1-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b5fcf7871acb ("sbitmap: correct wake_batch recalculation to avoid potential IO hung")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/sbitmap.h | 16 ++++--
lib/sbitmap.c | 122 +++++++++-------------------------------
2 files changed, 37 insertions(+), 101 deletions(-)
diff --git a/include/linux/sbitmap.h b/include/linux/sbitmap.h
index 4d2d5205ab586..d662cf136021d 100644
--- a/include/linux/sbitmap.h
+++ b/include/linux/sbitmap.h
@@ -86,11 +86,6 @@ struct sbitmap {
* struct sbq_wait_state - Wait queue in a &struct sbitmap_queue.
*/
struct sbq_wait_state {
- /**
- * @wait_cnt: Number of frees remaining before we wake up.
- */
- atomic_t wait_cnt;
-
/**
* @wait: Wait queue.
*/
@@ -138,6 +133,17 @@ struct sbitmap_queue {
* sbitmap_queue_get_shallow()
*/
unsigned int min_shallow_depth;
+
+ /**
+ * @completion_cnt: Number of bits cleared passed to the
+ * wakeup function.
+ */
+ atomic_t completion_cnt;
+
+ /**
+ * @wakeup_cnt: Number of thread wake ups issued.
+ */
+ atomic_t wakeup_cnt;
};
/**
diff --git a/lib/sbitmap.c b/lib/sbitmap.c
index ca099fbc6f3c9..a7c3dc3d2d174 100644
--- a/lib/sbitmap.c
+++ b/lib/sbitmap.c
@@ -434,6 +434,8 @@ int sbitmap_queue_init_node(struct sbitmap_queue *sbq, unsigned int depth,
sbq->wake_batch = sbq_calc_wake_batch(sbq, depth);
atomic_set(&sbq->wake_index, 0);
atomic_set(&sbq->ws_active, 0);
+ atomic_set(&sbq->completion_cnt, 0);
+ atomic_set(&sbq->wakeup_cnt, 0);
sbq->ws = kzalloc_node(SBQ_WAIT_QUEUES * sizeof(*sbq->ws), flags, node);
if (!sbq->ws) {
@@ -441,40 +443,21 @@ int sbitmap_queue_init_node(struct sbitmap_queue *sbq, unsigned int depth,
return -ENOMEM;
}
- for (i = 0; i < SBQ_WAIT_QUEUES; i++) {
+ for (i = 0; i < SBQ_WAIT_QUEUES; i++)
init_waitqueue_head(&sbq->ws[i].wait);
- atomic_set(&sbq->ws[i].wait_cnt, sbq->wake_batch);
- }
return 0;
}
EXPORT_SYMBOL_GPL(sbitmap_queue_init_node);
-static inline void __sbitmap_queue_update_wake_batch(struct sbitmap_queue *sbq,
- unsigned int wake_batch)
-{
- int i;
-
- if (sbq->wake_batch != wake_batch) {
- WRITE_ONCE(sbq->wake_batch, wake_batch);
- /*
- * Pairs with the memory barrier in sbitmap_queue_wake_up()
- * to ensure that the batch size is updated before the wait
- * counts.
- */
- smp_mb();
- for (i = 0; i < SBQ_WAIT_QUEUES; i++)
- atomic_set(&sbq->ws[i].wait_cnt, 1);
- }
-}
-
static void sbitmap_queue_update_wake_batch(struct sbitmap_queue *sbq,
unsigned int depth)
{
unsigned int wake_batch;
wake_batch = sbq_calc_wake_batch(sbq, depth);
- __sbitmap_queue_update_wake_batch(sbq, wake_batch);
+ if (sbq->wake_batch != wake_batch)
+ WRITE_ONCE(sbq->wake_batch, wake_batch);
}
void sbitmap_queue_recalculate_wake_batch(struct sbitmap_queue *sbq,
@@ -488,7 +471,8 @@ void sbitmap_queue_recalculate_wake_batch(struct sbitmap_queue *sbq,
wake_batch = clamp_val(depth / SBQ_WAIT_QUEUES,
min_batch, SBQ_WAKE_BATCH);
- __sbitmap_queue_update_wake_batch(sbq, wake_batch);
+
+ WRITE_ONCE(sbq->wake_batch, wake_batch);
}
EXPORT_SYMBOL_GPL(sbitmap_queue_recalculate_wake_batch);
@@ -585,7 +569,7 @@ static struct sbq_wait_state *sbq_wake_ptr(struct sbitmap_queue *sbq)
for (i = 0; i < SBQ_WAIT_QUEUES; i++) {
struct sbq_wait_state *ws = &sbq->ws[wake_index];
- if (waitqueue_active(&ws->wait) && atomic_read(&ws->wait_cnt)) {
+ if (waitqueue_active(&ws->wait)) {
if (wake_index != atomic_read(&sbq->wake_index))
atomic_set(&sbq->wake_index, wake_index);
return ws;
@@ -597,83 +581,31 @@ static struct sbq_wait_state *sbq_wake_ptr(struct sbitmap_queue *sbq)
return NULL;
}
-static bool __sbq_wake_up(struct sbitmap_queue *sbq, int *nr)
+void sbitmap_queue_wake_up(struct sbitmap_queue *sbq, int nr)
{
- struct sbq_wait_state *ws;
- unsigned int wake_batch;
- int wait_cnt, cur, sub;
- bool ret;
+ unsigned int wake_batch = READ_ONCE(sbq->wake_batch);
+ struct sbq_wait_state *ws = NULL;
+ unsigned int wakeups;
- if (*nr <= 0)
- return false;
+ if (!atomic_read(&sbq->ws_active))
+ return;
- ws = sbq_wake_ptr(sbq);
- if (!ws)
- return false;
+ atomic_add(nr, &sbq->completion_cnt);
+ wakeups = atomic_read(&sbq->wakeup_cnt);
- cur = atomic_read(&ws->wait_cnt);
do {
- /*
- * For concurrent callers of this, callers should call this
- * function again to wakeup a new batch on a different 'ws'.
- */
- if (cur == 0)
- return true;
- sub = min(*nr, cur);
- wait_cnt = cur - sub;
- } while (!atomic_try_cmpxchg(&ws->wait_cnt, &cur, wait_cnt));
-
- /*
- * If we decremented queue without waiters, retry to avoid lost
- * wakeups.
- */
- if (wait_cnt > 0)
- return !waitqueue_active(&ws->wait);
+ if (atomic_read(&sbq->completion_cnt) - wakeups < wake_batch)
+ return;
- *nr -= sub;
-
- /*
- * When wait_cnt == 0, we have to be particularly careful as we are
- * responsible to reset wait_cnt regardless whether we've actually
- * woken up anybody. But in case we didn't wakeup anybody, we still
- * need to retry.
- */
- ret = !waitqueue_active(&ws->wait);
- wake_batch = READ_ONCE(sbq->wake_batch);
+ if (!ws) {
+ ws = sbq_wake_ptr(sbq);
+ if (!ws)
+ return;
+ }
+ } while (!atomic_try_cmpxchg(&sbq->wakeup_cnt,
+ &wakeups, wakeups + wake_batch));
- /*
- * Wake up first in case that concurrent callers decrease wait_cnt
- * while waitqueue is empty.
- */
wake_up_nr(&ws->wait, wake_batch);
-
- /*
- * Pairs with the memory barrier in sbitmap_queue_resize() to
- * ensure that we see the batch size update before the wait
- * count is reset.
- *
- * Also pairs with the implicit barrier between decrementing wait_cnt
- * and checking for waitqueue_active() to make sure waitqueue_active()
- * sees result of the wakeup if atomic_dec_return() has seen the result
- * of atomic_set().
- */
- smp_mb__before_atomic();
-
- /*
- * Increase wake_index before updating wait_cnt, otherwise concurrent
- * callers can see valid wait_cnt in old waitqueue, which can cause
- * invalid wakeup on the old waitqueue.
- */
- sbq_index_atomic_inc(&sbq->wake_index);
- atomic_set(&ws->wait_cnt, wake_batch);
-
- return ret || *nr;
-}
-
-void sbitmap_queue_wake_up(struct sbitmap_queue *sbq, int nr)
-{
- while (__sbq_wake_up(sbq, &nr))
- ;
}
EXPORT_SYMBOL_GPL(sbitmap_queue_wake_up);
@@ -790,9 +722,7 @@ void sbitmap_queue_show(struct sbitmap_queue *sbq, struct seq_file *m)
seq_puts(m, "ws={\n");
for (i = 0; i < SBQ_WAIT_QUEUES; i++) {
struct sbq_wait_state *ws = &sbq->ws[i];
-
- seq_printf(m, "\t{.wait_cnt=%d, .wait=%s},\n",
- atomic_read(&ws->wait_cnt),
+ seq_printf(m, "\t{.wait=%s},\n",
waitqueue_active(&ws->wait) ? "active" : "inactive");
}
seq_puts(m, "}\n");
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 076/885] sbitmap: correct wake_batch recalculation to avoid potential IO hung
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 075/885] sbitmap: Use single per-bitmap counting to wake up queued tags Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 077/885] arm64: dts: mt8195: Fix CPU map for single-cluster SoC Greg Kroah-Hartman
` (811 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jan Kara, Kemeng Shi, Jens Axboe,
Sasha Levin
From: Kemeng Shi <shikemeng@huaweicloud.com>
[ Upstream commit b5fcf7871acb7f9a3a8ed341a68bd86aba3e254a ]
Commit 180dccb0dba4f ("blk-mq: fix tag_get wait task can't be awakened")
mentioned that in case of shared tags, there could be just one real
active hctx(queue) because of lazy detection of tag idle. Then driver tag
allocation may wait forever on this real active hctx(queue) if wake_batch
is > hctx_max_depth where hctx_max_depth is available tags depth for the
actve hctx(queue). However, the condition wake_batch > hctx_max_depth is
not strong enough to avoid IO hung as the sbitmap_queue_wake_up will only
wake up one wait queue for each wake_batch even though there is only one
waiter in the woken wait queue. After this, there is only one tag to free
and wake_batch may not be reached anymore. Commit 180dccb0dba4f ("blk-mq:
fix tag_get wait task can't be awakened") methioned that driver tag
allocation may wait forever. Actually, the inactive hctx(queue) will be
truely idle after at most 30 seconds and will call blk_mq_tag_wakeup_all
to wake one waiter per wait queue to break the hung. But IO hung for 30
seconds is also not acceptable. Set batch size to small enough that depth
of the shared hctx(queue) is enough to wake up all of the queues like
sbq_calc_wake_batch do to fix this potential IO hung.
Although hctx_max_depth will be clamped to at least 4 while wake_batch
recalculation does not do the clamp, the wake_batch will be always
recalculated to 1 when hctx_max_depth <= 4.
Fixes: 180dccb0dba4 ("blk-mq: fix tag_get wait task can't be awakened")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230116205059.3821738-6-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/sbitmap.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/lib/sbitmap.c b/lib/sbitmap.c
index a7c3dc3d2d174..e918cd8695f14 100644
--- a/lib/sbitmap.c
+++ b/lib/sbitmap.c
@@ -464,13 +464,10 @@ void sbitmap_queue_recalculate_wake_batch(struct sbitmap_queue *sbq,
unsigned int users)
{
unsigned int wake_batch;
- unsigned int min_batch;
unsigned int depth = (sbq->sb.depth + users - 1) / users;
- min_batch = sbq->sb.depth >= (4 * SBQ_WAIT_QUEUES) ? 4 : 1;
-
wake_batch = clamp_val(depth / SBQ_WAIT_QUEUES,
- min_batch, SBQ_WAKE_BATCH);
+ 1, SBQ_WAKE_BATCH);
WRITE_ONCE(sbq->wake_batch, wake_batch);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 077/885] arm64: dts: mt8195: Fix CPU map for single-cluster SoC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 076/885] sbitmap: correct wake_batch recalculation to avoid potential IO hung Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 078/885] arm64: dts: mt8192: " Greg Kroah-Hartman
` (810 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit cc4f0b13a887b483faa45084616998a21b63889d ]
MT8195 features the ARM DynamIQ technology and combines both four
Cortex-A78 (big) and four Cortex-A55 (LITTLE) CPUs in one cluster:
fix the CPU map to reflect that.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Link: https://lore.kernel.org/r/20230126103526.417039-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 6dad8aaee436c..774c2de1fd01e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -150,22 +150,20 @@ core2 {
core3 {
cpu = <&cpu3>;
};
- };
- cluster1 {
- core0 {
+ core4 {
cpu = <&cpu4>;
};
- core1 {
+ core5 {
cpu = <&cpu5>;
};
- core2 {
+ core6 {
cpu = <&cpu6>;
};
- core3 {
+ core7 {
cpu = <&cpu7>;
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 078/885] arm64: dts: mt8192: Fix CPU map for single-cluster SoC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 077/885] arm64: dts: mt8195: Fix CPU map for single-cluster SoC Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 079/885] arm64: dts: mt8186: " Greg Kroah-Hartman
` (809 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit 160ce54d635455ffb5e9b42c5ba9cb9aaa98cdb2 ]
MT8192 features the ARM DynamIQ technology and combines both four
Cortex-A76 (big) and four Cortex-A55 (LITTLE) CPUs in one cluster:
fix the CPU map to reflect that.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 48489980e27e ("arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile")
Link: https://lore.kernel.org/r/20230126103526.417039-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 7da221924e37c..ef1294d960145 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -158,19 +158,16 @@ core2 {
core3 {
cpu = <&cpu3>;
};
- };
-
- cluster1 {
- core0 {
+ core4 {
cpu = <&cpu4>;
};
- core1 {
+ core5 {
cpu = <&cpu5>;
};
- core2 {
+ core6 {
cpu = <&cpu6>;
};
- core3 {
+ core7 {
cpu = <&cpu7>;
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 079/885] arm64: dts: mt8186: Fix CPU map for single-cluster SoC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 078/885] arm64: dts: mt8192: " Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 080/885] arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node Greg Kroah-Hartman
` (808 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit 1c473804b0c8a68c6ef2cf519b38ec6725ca4aa5 ]
MT8186 features the ARM DynamIQ technology and combines both two
Cortex-A76 (big) and six Cortex-A55 (LITTLE) CPUs in one cluster:
fix the CPU map to reflect that.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 2e78620b1350 ("arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile")
Link: https://lore.kernel.org/r/20230126103526.417039-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index fb32e3efcdb12..48e15c8ad3b95 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -47,14 +47,12 @@ core4 {
core5 {
cpu = <&cpu5>;
};
- };
- cluster1 {
- core0 {
+ core6 {
cpu = <&cpu6>;
};
- core1 {
+ core7 {
cpu = <&cpu7>;
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 080/885] arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 079/885] arm64: dts: mt8186: " Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 081/885] arm64: dts: mediatek: mt8186: Fix watchdog compatible Greg Kroah-Hartman
` (807 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit 22925af785fa3470efdf566339616d801119d348 ]
Specify #pwm-cells on pwm@11006000 to make it actually usable.
Fixes: ae457b7679c4 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221128112028.58021-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 146e18b5b1f46..7bb316922a3a9 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -435,6 +435,7 @@ uart3: serial@11005000 {
pwm: pwm@11006000 {
compatible = "mediatek,mt7622-pwm";
reg = <0 0x11006000 0 0x1000>;
+ #pwm-cells = <2>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
clocks = <&topckgen CLK_TOP_PWM_SEL>,
<&pericfg CLK_PERI_PWM_PD>,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 081/885] arm64: dts: mediatek: mt8186: Fix watchdog compatible
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 080/885] arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 082/885] arm64: dts: mediatek: mt8195: " Greg Kroah-Hartman
` (806 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Allen-KH Cheng, Nícolas F . R . A . Prado,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit e5e961628d696237ddc3d53d9d5ac11f43e0bf67 ]
MT8186's watchdog embeds a reset controller and needs only the
mediatek,mt8186-wdt compatible string as the MT6589 one is there
for watchdogs that don't have any reset controller capability.
Fixes: 2e78620b1350 ("arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Co-developed-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221108033209.22751-2-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 48e15c8ad3b95..f88d660e41540 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -330,8 +330,7 @@ pio: pinctrl@10005000 {
};
watchdog: watchdog@10007000 {
- compatible = "mediatek,mt8186-wdt",
- "mediatek,mt6589-wdt";
+ compatible = "mediatek,mt8186-wdt";
mediatek,disable-extrst;
reg = <0 0x10007000 0 0x1000>;
#reset-cells = <1>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 082/885] arm64: dts: mediatek: mt8195: Fix watchdog compatible
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 081/885] arm64: dts: mediatek: mt8186: Fix watchdog compatible Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 083/885] arm64: dts: mediatek: mt7986: " Greg Kroah-Hartman
` (805 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Allen-KH Cheng, Nícolas F . R . A . Prado,
Matthias Brugger, Sasha Levin
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ Upstream commit 02938f460cde0d360dde48056c4d1c0a4bd49230 ]
MT8195's watchdog embeds a reset controller and needs only the
mediatek,mt8195-wdt compatible string as the MT6589 one is there
for watchdogs that don't have any reset controller capability.
Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Co-developed-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221108033209.22751-3-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 774c2de1fd01e..2c2b946b614bf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -690,8 +690,7 @@ power-domain@MT8195_POWER_DOMAIN_AUDIO {
};
watchdog: watchdog@10007000 {
- compatible = "mediatek,mt8195-wdt",
- "mediatek,mt6589-wdt";
+ compatible = "mediatek,mt8195-wdt";
mediatek,disable-extrst;
reg = <0 0x10007000 0 0x100>;
#reset-cells = <1>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 083/885] arm64: dts: mediatek: mt7986: Fix watchdog compatible
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 082/885] arm64: dts: mediatek: mt8195: " Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 084/885] ARM: dts: stm32: Update part number NVMEM description on stm32mp131 Greg Kroah-Hartman
` (804 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Allen-KH Cheng,
AngeloGioacchino Del Regno, Nícolas F . R . A . Prado,
Matthias Brugger, Sasha Levin
From: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
[ Upstream commit 70d24df30d06e5c822ba94751166ef55d0e28a89 ]
MT7986's watchdog embeds a reset controller and needs only the
mediatek,mt7986-wdt compatible string as the MT6589 one is there
for watchdogs that don't have any reset controller capability.
Fixes: 50137c150f5f ("arm64: dts: mediatek: add basic mt7986 support")
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221108033209.22751-4-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 35e01fa2d314b..fc338bd497f51 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -125,8 +125,7 @@ topckgen: topckgen@1001b000 {
};
watchdog: watchdog@1001c000 {
- compatible = "mediatek,mt7986-wdt",
- "mediatek,mt6589-wdt";
+ compatible = "mediatek,mt7986-wdt";
reg = <0 0x1001c000 0 0x1000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 084/885] ARM: dts: stm32: Update part number NVMEM description on stm32mp131
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 083/885] arm64: dts: mediatek: mt7986: " Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 085/885] blk-mq: avoid sleep in blk_mq_alloc_request_hctx Greg Kroah-Hartman
` (803 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Patrick Delaunay, Alexandre Torgue,
Sasha Levin
From: Patrick Delaunay <patrick.delaunay@foss.st.com>
[ Upstream commit 366384e495511bea8583e44173629a3012d62db0 ]
The STM32MP13x Device Part Number (also named RPN in reference manual)
only uses the first 12 bits in OTP4, all the other bit are reserved and
they can be different of zero; they must be masked in NVMEM result, so
the number of bits must be defined in the nvmem cell description.
Fixes: 1da8779c0029 ("ARM: dts: stm32: add STM32MP13 SoCs support")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/stm32mp131.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index dd35a607073dd..723787f72cfd9 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -405,6 +405,7 @@ bsec: efuse@5c005000 {
part_number_otp: part_number_otp@4 {
reg = <0x4 0x2>;
+ bits = <0 12>;
};
ts_cal1: calib@5c {
reg = <0x5c 0x2>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 085/885] blk-mq: avoid sleep in blk_mq_alloc_request_hctx
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 084/885] ARM: dts: stm32: Update part number NVMEM description on stm32mp131 Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 086/885] blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx Greg Kroah-Hartman
` (802 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christoph Hellwig, Kemeng Shi,
Jens Axboe, Sasha Levin
From: Kemeng Shi <shikemeng@huaweicloud.com>
[ Upstream commit 6ee858a3d3270a68902d66bb47c151a83622535c ]
Commit 1f5bd336b9150 ("blk-mq: add blk_mq_alloc_request_hctx") add
blk_mq_alloc_request_hctx to send commands to a specific queue. If
BLK_MQ_REQ_NOWAIT is not set in tag allocation, we may change to different
hctx after sleep and get tag from unexpected hctx. So BLK_MQ_REQ_NOWAIT
must be set in flags for blk_mq_alloc_request_hctx.
After commit 600c3b0cea784 ("blk-mq: open code __blk_mq_alloc_request in
blk_mq_alloc_request_hctx"), blk_mq_alloc_request_hctx return -EINVAL
if both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED are not set instead of
if BLK_MQ_REQ_NOWAIT is not set. So if BLK_MQ_REQ_NOWAIT is not set and
BLK_MQ_REQ_RESERVED is set, blk_mq_alloc_request_hctx could alloc tag
from unexpected hctx. I guess what we need here is that return -EINVAL
if either BLK_MQ_REQ_NOWAIT or BLK_MQ_REQ_RESERVED is not set.
Currently both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED will be set if
specific hctx is needed in nvme_auth_submit, nvmf_connect_io_queue
and nvmf_connect_admin_queue. Fix the potential BLK_MQ_REQ_NOWAIT missed
case in future.
Fixes: 600c3b0cea78 ("blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-mq.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 83fbc7c546172..2983ace812667 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -626,7 +626,8 @@ struct request *blk_mq_alloc_request_hctx(struct request_queue *q,
* allocator for this for the rare use case of a command tied to
* a specific queue.
*/
- if (WARN_ON_ONCE(!(flags & (BLK_MQ_REQ_NOWAIT | BLK_MQ_REQ_RESERVED))))
+ if (WARN_ON_ONCE(!(flags & BLK_MQ_REQ_NOWAIT)) ||
+ WARN_ON_ONCE(!(flags & BLK_MQ_REQ_RESERVED)))
return ERR_PTR(-EINVAL);
if (hctx_idx >= q->nr_hw_queues)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 086/885] blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 085/885] blk-mq: avoid sleep in blk_mq_alloc_request_hctx Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 087/885] blk-mq: wait on correct sbitmap_queue in blk_mq_mark_tag_wait Greg Kroah-Hartman
` (801 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christoph Hellwig, Kemeng Shi,
Jens Axboe, Sasha Levin
From: Kemeng Shi <shikemeng@huaweicloud.com>
[ Upstream commit c31e76bcc379182fe67a82c618493b7b8868c672 ]
Commit 97889f9ac24f8 ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()") remove handle of TAG_SHARED in restart,
then shared_hctx_restart counted for how many hardware queues are marked
for restart is removed too.
Remove the stale comment that we still count hardware queues need restart.
Fixes: 97889f9ac24f ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-mq-sched.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/block/blk-mq-sched.c b/block/blk-mq-sched.c
index a4f7c101b53b2..176704a0e4da4 100644
--- a/block/blk-mq-sched.c
+++ b/block/blk-mq-sched.c
@@ -19,8 +19,7 @@
#include "blk-wbt.h"
/*
- * Mark a hardware queue as needing a restart. For shared queues, maintain
- * a count of how many hardware queues are marked for restart.
+ * Mark a hardware queue as needing a restart.
*/
void blk_mq_sched_mark_restart_hctx(struct blk_mq_hw_ctx *hctx)
{
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 087/885] blk-mq: wait on correct sbitmap_queue in blk_mq_mark_tag_wait
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 086/885] blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 088/885] blk-mq: Fix potential io hung for shared sbitmap per tagset Greg Kroah-Hartman
` (800 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christoph Hellwig, Kemeng Shi,
Jens Axboe, Sasha Levin
From: Kemeng Shi <shikemeng@huaweicloud.com>
[ Upstream commit 98b99e9412d0cde8c7b442bf5efb09528a2ede8b ]
For shared queues case, we will only wait on bitmap_tags if we fail to get
driver tag. However, rq could be from breserved_tags, then two problems
will occur:
1. io hung if no tag is currently allocated from bitmap_tags.
2. unnecessary wakeup when tag is freed to bitmap_tags while no tag is
freed to breserved_tags.
Wait on the bitmap which rq from to fix this.
Fixes: f906a6a0f426 ("blk-mq: improve tag waiting setup for non-shared tags")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-mq.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 2983ace812667..faffc64fe4ce8 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1794,7 +1794,7 @@ static int blk_mq_dispatch_wake(wait_queue_entry_t *wait, unsigned mode,
static bool blk_mq_mark_tag_wait(struct blk_mq_hw_ctx *hctx,
struct request *rq)
{
- struct sbitmap_queue *sbq = &hctx->tags->bitmap_tags;
+ struct sbitmap_queue *sbq;
struct wait_queue_head *wq;
wait_queue_entry_t *wait;
bool ret;
@@ -1817,6 +1817,10 @@ static bool blk_mq_mark_tag_wait(struct blk_mq_hw_ctx *hctx,
if (!list_empty_careful(&wait->entry))
return false;
+ if (blk_mq_tag_is_reserved(rq->mq_hctx->sched_tags, rq->internal_tag))
+ sbq = &hctx->tags->breserved_tags;
+ else
+ sbq = &hctx->tags->bitmap_tags;
wq = &bt_wait_ptr(sbq, hctx)->wait;
spin_lock_irq(&wq->lock);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 088/885] blk-mq: Fix potential io hung for shared sbitmap per tagset
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 087/885] blk-mq: wait on correct sbitmap_queue in blk_mq_mark_tag_wait Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 089/885] blk-mq: correct stale comment of .get_budget Greg Kroah-Hartman
` (799 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kemeng Shi, Christoph Hellwig,
Jens Axboe, Sasha Levin
From: Kemeng Shi <shikemeng@huaweicloud.com>
[ Upstream commit 47df9ce95cd568d3f84218c4f65e9fbd4dfeda55 ]
Commit f906a6a0f4268 ("blk-mq: improve tag waiting setup for non-shared
tags") mark restart for unshared tags for improvement. At that time,
tags is only shared betweens queues and we can check if tags is shared
by test BLK_MQ_F_TAG_SHARED.
Afterwards, commit 32bc15afed04b ("blk-mq: Facilitate a shared sbitmap per
tagset") enabled tags share betweens hctxs inside a queue. We only
mark restart for shared hctxs inside a queue and may cause io hung if
there is no tag currently allocated by hctxs going to be marked restart.
Wait on sbitmap_queue instead of mark restart for shared hctxs case to
fix this.
Fixes: 32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per tagset")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-mq.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index faffc64fe4ce8..fe0a3a882f465 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1799,7 +1799,8 @@ static bool blk_mq_mark_tag_wait(struct blk_mq_hw_ctx *hctx,
wait_queue_entry_t *wait;
bool ret;
- if (!(hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED)) {
+ if (!(hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED) &&
+ !(blk_mq_is_shared_tags(hctx->flags))) {
blk_mq_sched_mark_restart_hctx(hctx);
/*
@@ -2069,7 +2070,8 @@ bool blk_mq_dispatch_rq_list(struct blk_mq_hw_ctx *hctx, struct list_head *list,
bool needs_restart;
/* For non-shared tags, the RESTART check will suffice */
bool no_tag = prep == PREP_DISPATCH_NO_TAG &&
- (hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED);
+ ((hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED) ||
+ blk_mq_is_shared_tags(hctx->flags));
if (nr_budgets)
blk_mq_release_budgets(q, list);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 089/885] blk-mq: correct stale comment of .get_budget
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (87 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 088/885] blk-mq: Fix potential io hung for shared sbitmap per tagset Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 090/885] arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input Greg Kroah-Hartman
` (798 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kemeng Shi, Christoph Hellwig,
Jens Axboe, Sasha Levin
From: Kemeng Shi <shikemeng@huaweicloud.com>
[ Upstream commit 01542f651a9f58a9b176c3d3dc3eefbacee53b78 ]
Commit 88022d7201e96 ("blk-mq: don't handle failure in .get_budget")
remove BLK_STS_RESOURCE return value and we only check if we can get
the budget from .get_budget() now.
Correct stale comment that ".get_budget() returns BLK_STS_NO_RESOURCE"
to ".get_budget() fails to get the budget".
Fixes: 88022d7201e9 ("blk-mq: don't handle failure in .get_budget")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-mq-sched.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/block/blk-mq-sched.c b/block/blk-mq-sched.c
index 176704a0e4da4..91fb5d1465cac 100644
--- a/block/blk-mq-sched.c
+++ b/block/blk-mq-sched.c
@@ -81,7 +81,7 @@ static bool blk_mq_dispatch_hctx_list(struct list_head *rq_list)
/*
* Only SCSI implements .get_budget and .put_budget, and SCSI restarts
* its queue by itself in its completion handler, so we don't need to
- * restart queue if .get_budget() returns BLK_STS_NO_RESOURCE.
+ * restart queue if .get_budget() fails to get the budget.
*
* Returns -EAGAIN if hctx->dispatch was found non-empty and run_work has to
* be run again. This is necessary to avoid starving flushes.
@@ -209,7 +209,7 @@ static struct blk_mq_ctx *blk_mq_next_ctx(struct blk_mq_hw_ctx *hctx,
/*
* Only SCSI implements .get_budget and .put_budget, and SCSI restarts
* its queue by itself in its completion handler, so we don't need to
- * restart queue if .get_budget() returns BLK_STS_NO_RESOURCE.
+ * restart queue if .get_budget() fails to get the budget.
*
* Returns -EAGAIN if hctx->dispatch was found non-empty and run_work has to
* be run again. This is necessary to avoid starving flushes.
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 090/885] arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (88 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 089/885] blk-mq: correct stale comment of .get_budget Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 091/885] arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC Greg Kroah-Hartman
` (797 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Baryshkov, Bjorn Andersson,
Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit ac0d84d4556cecf81ba0b1631d25d9a395235a5c ]
In some cases the driver might need using GPLL0 to drive CPU clocks.
Bring it in through the sys_apcs_aux clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113120544.59320-15-dmitry.baryshkov@linaro.org
Stable-dep-of: 8ae72166c2b7 ("arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 1107befc3b091..a709dca48d07e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2932,8 +2932,8 @@ kryocc: clock-controller@6400000 {
compatible = "qcom,msm8996-apcc";
reg = <0x06400000 0x90000>;
- clock-names = "xo";
- clocks = <&rpmcc RPM_SMD_BB_CLK1>;
+ clock-names = "xo", "sys_apcs_aux";
+ clocks = <&rpmcc RPM_SMD_BB_CLK1>, <&apcs_glb>;
#clock-cells = <1>;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 091/885] arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (89 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 090/885] arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 092/885] arm64: dts: qcom: sm8350: drop incorrect cells from serial Greg Kroah-Hartman
` (796 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Konrad Dybcio, Dmitry Baryshkov,
Bjorn Andersson, Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 8ae72166c2b73b0f2ce498ea15d4feceb9fef50e ]
The vendor kernel uses RPM_SMD_XO_CLK_SRC clock as an CXO clock rather
than using the RPM_SMD_BB_CLK1 directly. Follow this example and switch
msm8996.dtsi to use RPM_SMD_XO_CLK_SRC clock instead of RPM_SMB_BB_CLK1.
Fixes: 2b8c9c77c268 ("arm64: dts: qcom: msm8996: convert xo_board to RPM_SMD_BB_CLK1")
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120061417.2623751-7-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index a709dca48d07e..36af4fea38e73 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -712,7 +712,7 @@ gcc: clock-controller@300000 {
#power-domain-cells = <1>;
reg = <0x00300000 0x90000>;
- clocks = <&rpmcc RPM_SMD_BB_CLK1>,
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&rpmcc RPM_SMD_LN_BB_CLK>,
<&sleep_clk>,
<&pciephy_0>,
@@ -1050,7 +1050,7 @@ dsi0_phy: dsi-phy@994400 {
#clock-cells = <1>;
#phy-cells = <0>;
- clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+ clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "ref";
status = "disabled";
};
@@ -1118,7 +1118,7 @@ dsi1_phy: dsi-phy@996400 {
#clock-cells = <1>;
#phy-cells = <0>;
- clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+ clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "ref";
status = "disabled";
};
@@ -2933,7 +2933,7 @@ kryocc: clock-controller@6400000 {
reg = <0x06400000 0x90000>;
clock-names = "xo", "sys_apcs_aux";
- clocks = <&rpmcc RPM_SMD_BB_CLK1>, <&apcs_glb>;
+ clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
#clock-cells = <1>;
};
@@ -3052,7 +3052,7 @@ sdhc1: mmc@7464900 {
clock-names = "iface", "core", "xo";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
- <&rpmcc RPM_SMD_BB_CLK1>;
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
resets = <&gcc GCC_SDCC1_BCR>;
pinctrl-names = "default", "sleep";
@@ -3076,7 +3076,7 @@ sdhc2: mmc@74a4900 {
clock-names = "iface", "core", "xo";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
- <&rpmcc RPM_SMD_BB_CLK1>;
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
resets = <&gcc GCC_SDCC2_BCR>;
pinctrl-names = "default", "sleep";
@@ -3383,7 +3383,7 @@ adsp_pil: remoteproc@9300000 {
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
- clocks = <&rpmcc RPM_SMD_BB_CLK1>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "xo";
memory-region = <&adsp_mem>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 092/885] arm64: dts: qcom: sm8350: drop incorrect cells from serial
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (90 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 091/885] arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 093/885] arm64: dts: qcom: sm8450: " Greg Kroah-Hartman
` (795 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski, Konrad Dybcio,
Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 6027331e6eae9eb957d1b73a7e3255f4151d6163 ]
The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.
Fixes: cf03cd7e12bd ("arm64: dts: qcom: sm8350: Set up WRAP0 QUPs")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index a6270d97a3192..ca7c428a741d4 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1043,8 +1043,6 @@ uart2: serial@98c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 093/885] arm64: dts: qcom: sm8450: drop incorrect cells from serial
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (91 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 092/885] arm64: dts: qcom: sm8350: drop incorrect cells from serial Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 094/885] arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions Greg Kroah-Hartman
` (794 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski, Konrad Dybcio,
Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 60d2da2c916956535cf37b7bf1ae8fefbf432e55 ]
The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.
Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node")
Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 32a37c878a34c..df0d888ffc008 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -991,8 +991,6 @@ uart20: serial@894000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart20_default>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
@@ -1387,8 +1385,6 @@ uart7: serial@99c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 094/885] arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (92 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 093/885] arm64: dts: qcom: sm8450: " Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 095/885] arm64: dts: qcom: msm8953: correct TLMM gpio-ranges Greg Kroah-Hartman
` (793 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jamie Douglass, Petr Vorel,
Konrad Dybcio, Bjorn Andersson, Sasha Levin
From: Jamie Douglass <jamiemdouglass@gmail.com>
[ Upstream commit d44106883d74992343710f18c4aaae937c7cefab ]
The memory region reserved by a previous commit (see fixes tag below)
overlaps with the SMEM and MPSS memory regions, causing error messages in
dmesg:
OF: reserved mem: OVERLAP DETECTED!
reserved@5000000 (0x0000000005000000--0x0000000007200000)
overlaps with smem_region@6a00000
(0x0000000006a00000--0x0000000006c00000)
OF: reserved mem: OVERLAP DETECTED!
reserved@6c00000 (0x0000000006c00000--0x0000000007200000)
overlaps with memory@7000000
(0x0000000007000000--0x000000000ca00000)
This patch resolves both of these by splitting the previously reserved
memory region into two sections either side of the SMEM region and by
cutting off the second memory region to 0x7000000.
Fixes: 22c7e1a0fa45 ("arm64: dts: msm8992-bullhead: add memory hole region")
Signed-off-by: Jamie Douglass <jamiemdouglass@gmail.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202054819.16079-1-jamiemdouglass@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
index 49f30efdbe656..d1962dc24bb7e 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -55,8 +55,13 @@ cont_splash_mem: memory@3400000 {
no-map;
};
- removed_region: reserved@5000000 {
- reg = <0 0x05000000 0 0x2200000>;
+ reserved@5000000 {
+ reg = <0x0 0x05000000 0x0 0x1a00000>;
+ no-map;
+ };
+
+ reserved@6c00000 {
+ reg = <0x0 0x06c00000 0x0 0x400000>;
no-map;
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 095/885] arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (93 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 094/885] arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 096/885] arm64: dts: qcom: msm8992-*: Fix up comments Greg Kroah-Hartman
` (792 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski, Luca Weiss,
Linus Walleij, Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit a4fb71497df23cb0d02d70fa2b8f8786328e325d ]
Correct the number of GPIOs in TLMM pin controller.
Fixes: 9fb08c801923 ("arm64: dts: qcom: Add MSM8953 device tree")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202104452.299048-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8953.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 6b992a6d56c16..85a87d058f8ab 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -455,7 +455,7 @@ tlmm: pinctrl@1000000 {
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
- gpio-ranges = <&tlmm 0 0 155>;
+ gpio-ranges = <&tlmm 0 0 142>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 096/885] arm64: dts: qcom: msm8992-*: Fix up comments
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (94 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 095/885] arm64: dts: qcom: msm8953: correct TLMM gpio-ranges Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 097/885] arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators Greg Kroah-Hartman
` (791 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Konrad Dybcio, Bjorn Andersson, Sasha Levin
From: Konrad Dybcio <konrad.dybcio@linaro.org>
[ Upstream commit 290d43062d261cebd17ff590dc91f1d1e3fe6eed ]
Make sure all multiline C-style commends begin with just '/*' with
the comment text starting on a new line.
Also, trim off downstream regulator properties from comments to prevent
them from accidentally landing into mainline one day..
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-9-konrad.dybcio@linaro.org
Stable-dep-of: 2866527093dd ("arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../dts/qcom/msm8992-lg-bullhead-rev-10.dts | 3 +-
.../dts/qcom/msm8992-lg-bullhead-rev-101.dts | 3 +-
.../boot/dts/qcom/msm8992-lg-bullhead.dtsi | 41 ++++++++++---------
arch/arm64/boot/dts/qcom/msm8992.dtsi | 3 +-
4 files changed, 28 insertions(+), 22 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
index 7e6bce4af4410..4159fc35571a6 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
*/
/dts-v1/;
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
index e6a5ebd30e2f5..ad9702dd171be 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
*/
/dts-v1/;
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
index d1962dc24bb7e..db05dc3ba16df 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
+/*
+ * Copyright (c) 2015, LGE Inc. All rights reserved.
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
* Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
* Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
@@ -250,9 +251,11 @@ pm8994_l25: l25 {
};
pm8994_l26: l26 {
- /* TODO: value from downstream
- regulator-min-microvolt = <987500>;
- fails to apply */
+ /*
+ * TODO: value from downstream
+ * regulator-min-microvolt = <987500>;
+ * fails to apply
+ */
};
pm8994_l27: l27 {
@@ -266,19 +269,19 @@ pm8994_l28: l28 {
};
pm8994_l29: l29 {
- /* TODO: Unsupported voltage range.
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- qcom,init-voltage = <2800000>;
- */
+ /*
+ * TODO: Unsupported voltage range.
+ * regulator-min-microvolt = <2800000>;
+ * regulator-max-microvolt = <2800000>;
+ */
};
pm8994_l30: l30 {
- /* TODO: get this verified
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- */
+ /*
+ * TODO: get this verified
+ * regulator-min-microvolt = <1800000>;
+ * regulator-max-microvolt = <1800000>;
+ */
};
pm8994_l31: l31 {
@@ -287,11 +290,11 @@ pm8994_l31: l31 {
};
pm8994_l32: l32 {
- /* TODO: get this verified
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- */
+ /*
+ * TODO: get this verified
+ * regulator-min-microvolt = <1800000>;
+ * regulator-max-microvolt = <1800000>;
+ */
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index f4be09fc1b151..02fc3795dbfd7 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*/
#include "msm8994.dtsi"
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 097/885] arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (95 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 096/885] arm64: dts: qcom: msm8992-*: Fix up comments Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 098/885] s390/dasd: Fix potential memleak in dasd_eckd_init() Greg Kroah-Hartman
` (790 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Petr Vorel, Jamie Douglass,
Bjorn Andersson, Sasha Levin
From: Petr Vorel <pvorel@suse.cz>
[ Upstream commit 2866527093ddbc6356bb31f560f0b4b4decf3e2e ]
Enable pm8994_s1, pm8994_l{26,29,30,32} regulators.
Use values from downstream kernel on bullhead rev 1.01.
NOTE: downstream kernel on angler rev 1.01 differences:
* pm8994_l29: regulator-min-microvolt = <2700000>
* pm8994_l{20,28,31}: use regulator-boot-on
Verification:
[ 1.832460] s1: Bringing 0uV into 1025000-1025000uV
...
[ 2.057667] l26: Bringing 0uV into 987500-987500uV
...
[ 2.075722] l29: Bringing 0uV into 2800000-2800000uV
[ 2.076604] l30: Bringing 0uV into 1800000-1800000uV
[ 2.082431] l31: Bringing 0uV into 1262500-1262500uV
[ 2.095767] l32: Bringing 0uV into 1800000-1800000uV
Fixes: f3b2c99e73be ("arm64: dts: Enable onboard SDHCI on msm8992")
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Jamie Douglass <jamiemdouglass@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203100952.13857-1-pvorel@suse.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../boot/dts/qcom/msm8992-lg-bullhead.dtsi | 32 ++++++-------------
1 file changed, 10 insertions(+), 22 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
index db05dc3ba16df..465b2828acbd4 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -94,8 +94,8 @@ pm8994_regulators: pm8994-regulators {
/* S1, S2, S6 and S12 are managed by RPMPD */
pm8994_s1: s1 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
+ regulator-min-microvolt = <1025000>;
+ regulator-max-microvolt = <1025000>;
};
pm8994_s2: s2 {
@@ -251,11 +251,8 @@ pm8994_l25: l25 {
};
pm8994_l26: l26 {
- /*
- * TODO: value from downstream
- * regulator-min-microvolt = <987500>;
- * fails to apply
- */
+ regulator-min-microvolt = <987500>;
+ regulator-max-microvolt = <987500>;
};
pm8994_l27: l27 {
@@ -269,19 +266,13 @@ pm8994_l28: l28 {
};
pm8994_l29: l29 {
- /*
- * TODO: Unsupported voltage range.
- * regulator-min-microvolt = <2800000>;
- * regulator-max-microvolt = <2800000>;
- */
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
};
pm8994_l30: l30 {
- /*
- * TODO: get this verified
- * regulator-min-microvolt = <1800000>;
- * regulator-max-microvolt = <1800000>;
- */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
pm8994_l31: l31 {
@@ -290,11 +281,8 @@ pm8994_l31: l31 {
};
pm8994_l32: l32 {
- /*
- * TODO: get this verified
- * regulator-min-microvolt = <1800000>;
- * regulator-max-microvolt = <1800000>;
- */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 098/885] s390/dasd: Fix potential memleak in dasd_eckd_init()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (96 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 097/885] arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 099/885] sched/rt: pick_next_rt_entity(): check list_entry Greg Kroah-Hartman
` (789 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Qiheng Lin, Stefan Haberland,
Jens Axboe, Sasha Levin
From: Qiheng Lin <linqiheng@huawei.com>
[ Upstream commit 460e9bed82e49db1b823dcb4e421783854d86c40 ]
`dasd_reserve_req` is allocated before `dasd_vol_info_req`, and it
also needs to be freed before the error returns, just like the other
cases in this function.
Fixes: 9e12e54c7a8f ("s390/dasd: Handle out-of-space constraint")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20221208133809.16796-1-linqiheng@huawei.com
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230210000253.1644903-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/s390/block/dasd_eckd.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 5d0b9991e91a4..b20ce86b97b29 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -6956,8 +6956,10 @@ dasd_eckd_init(void)
return -ENOMEM;
dasd_vol_info_req = kmalloc(sizeof(*dasd_vol_info_req),
GFP_KERNEL | GFP_DMA);
- if (!dasd_vol_info_req)
+ if (!dasd_vol_info_req) {
+ kfree(dasd_reserve_req);
return -ENOMEM;
+ }
pe_handler_worker = kmalloc(sizeof(*pe_handler_worker),
GFP_KERNEL | GFP_DMA);
if (!pe_handler_worker) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 099/885] sched/rt: pick_next_rt_entity(): check list_entry
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (97 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 098/885] s390/dasd: Fix potential memleak in dasd_eckd_init() Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 100/885] perf/x86/intel/ds: Fix the conversion from TSC to perf time Greg Kroah-Hartman
` (788 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pietro Borrello,
Peter Zijlstra (Intel), Phil Auld, Steven Rostedt (Google),
Sasha Levin
From: Pietro Borrello <borrello@diag.uniroma1.it>
[ Upstream commit 7c4a5b89a0b5a57a64b601775b296abf77a9fe97 ]
Commit 326587b84078 ("sched: fix goto retry in pick_next_task_rt()")
removed any path which could make pick_next_rt_entity() return NULL.
However, BUG_ON(!rt_se) in _pick_next_task_rt() (the only caller of
pick_next_rt_entity()) still checks the error condition, which can
never happen, since list_entry() never returns NULL.
Remove the BUG_ON check, and instead emit a warning in the only
possible error condition here: the queue being empty which should
never happen.
Fixes: 326587b84078 ("sched: fix goto retry in pick_next_task_rt()")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230128-list-entry-null-check-sched-v3-1-b1a71bd1ac6b@diag.uniroma1.it
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sched/rt.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index ed2a47e4ddaec..0a11f44adee57 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -1777,6 +1777,8 @@ static struct sched_rt_entity *pick_next_rt_entity(struct rt_rq *rt_rq)
BUG_ON(idx >= MAX_RT_PRIO);
queue = array->queue + idx;
+ if (SCHED_WARN_ON(list_empty(queue)))
+ return NULL;
next = list_entry(queue->next, struct sched_rt_entity, run_list);
return next;
@@ -1789,7 +1791,8 @@ static struct task_struct *_pick_next_task_rt(struct rq *rq)
do {
rt_se = pick_next_rt_entity(rt_rq);
- BUG_ON(!rt_se);
+ if (unlikely(!rt_se))
+ return NULL;
rt_rq = group_rt_rq(rt_se);
} while (rt_rq);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 100/885] perf/x86/intel/ds: Fix the conversion from TSC to perf time
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (98 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 099/885] sched/rt: pick_next_rt_entity(): check list_entry Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 101/885] x86/perf/zhaoxin: Add stepping check for ZXC Greg Kroah-Hartman
` (787 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Namhyung Kim, Kan Liang,
Peter Zijlstra (Intel),
Sasha Levin
From: Kan Liang <kan.liang@linux.intel.com>
[ Upstream commit 89e97eb8cec0f1af5ebf2380308913256ca7915a ]
The time order is incorrect when the TSC in a PEBS record is used.
$perf record -e cycles:upp dd if=/dev/zero of=/dev/null
count=10000
$ perf script --show-task-events
perf-exec 0 0.000000: PERF_RECORD_COMM: perf-exec:915/915
dd 915 106.479872: PERF_RECORD_COMM exec: dd:915/915
dd 915 106.483270: PERF_RECORD_EXIT(915:915):(914:914)
dd 915 106.512429: 1 cycles:upp:
ffffffff96c011b7 [unknown] ([unknown])
... ...
The perf time is from sched_clock_cpu(). The current PEBS code
unconditionally convert the TSC to native_sched_clock(). There is a
shift between the two clocks. If the TSC is stable, the shift is
consistent, __sched_clock_offset. If the TSC is unstable, the shift has
to be calculated at runtime.
This patch doesn't support the conversion when the TSC is unstable. The
TSC unstable case is a corner case and very unlikely to happen. If it
happens, the TSC in a PEBS record will be dropped and fall back to
perf_event_clock().
Fixes: 47a3aeb39e8d ("perf/x86/intel/pebs: Fix PEBS timestamps overwritten")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/CAM9d7cgWDVAq8-11RbJ2uGfwkKD6fA-OMwOKDrNUrU_=8MgEjg@mail.gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/intel/ds.c | 35 ++++++++++++++++++++++++++---------
1 file changed, 26 insertions(+), 9 deletions(-)
diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index 446d2833efa76..3ff38e7409e3d 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -2,12 +2,14 @@
#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/slab.h>
+#include <linux/sched/clock.h>
#include <asm/cpu_entry_area.h>
#include <asm/perf_event.h>
#include <asm/tlbflush.h>
#include <asm/insn.h>
#include <asm/io.h>
+#include <asm/timer.h>
#include "../perf_event.h"
@@ -1519,6 +1521,27 @@ static u64 get_data_src(struct perf_event *event, u64 aux)
return val;
}
+static void setup_pebs_time(struct perf_event *event,
+ struct perf_sample_data *data,
+ u64 tsc)
+{
+ /* Converting to a user-defined clock is not supported yet. */
+ if (event->attr.use_clockid != 0)
+ return;
+
+ /*
+ * Doesn't support the conversion when the TSC is unstable.
+ * The TSC unstable case is a corner case and very unlikely to
+ * happen. If it happens, the TSC in a PEBS record will be
+ * dropped and fall back to perf_event_clock().
+ */
+ if (!using_native_sched_clock() || !sched_clock_stable())
+ return;
+
+ data->time = native_sched_clock_from_tsc(tsc) + __sched_clock_offset;
+ data->sample_flags |= PERF_SAMPLE_TIME;
+}
+
#define PERF_SAMPLE_ADDR_TYPE (PERF_SAMPLE_ADDR | \
PERF_SAMPLE_PHYS_ADDR | \
PERF_SAMPLE_DATA_PAGE_SIZE)
@@ -1668,11 +1691,8 @@ static void setup_pebs_fixed_sample_data(struct perf_event *event,
*
* We can only do this for the default trace clock.
*/
- if (x86_pmu.intel_cap.pebs_format >= 3 &&
- event->attr.use_clockid == 0) {
- data->time = native_sched_clock_from_tsc(pebs->tsc);
- data->sample_flags |= PERF_SAMPLE_TIME;
- }
+ if (x86_pmu.intel_cap.pebs_format >= 3)
+ setup_pebs_time(event, data, pebs->tsc);
if (has_branch_stack(event)) {
data->br_stack = &cpuc->lbr_stack;
@@ -1735,10 +1755,7 @@ static void setup_pebs_adaptive_sample_data(struct perf_event *event,
perf_sample_data_init(data, 0, event->hw.last_period);
data->period = event->hw.last_period;
- if (event->attr.use_clockid == 0) {
- data->time = native_sched_clock_from_tsc(basic->tsc);
- data->sample_flags |= PERF_SAMPLE_TIME;
- }
+ setup_pebs_time(event, data, basic->tsc);
/*
* We must however always use iregs for the unwinder to stay sane; the
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 101/885] x86/perf/zhaoxin: Add stepping check for ZXC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (99 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 100/885] perf/x86/intel/ds: Fix the conversion from TSC to perf time Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 102/885] KEYS: asymmetric: Fix ECDSA use via keyctl uapi Greg Kroah-Hartman
` (786 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arjan, Kevin Brace, silviazhao,
Peter Zijlstra (Intel),
Sasha Levin
From: silviazhao <silviazhao-oc@zhaoxin.com>
[ Upstream commit fd636b6a9bc6034f2e5bb869658898a2b472c037 ]
Some of Nano series processors will lead GP when accessing
PMC fixed counter. Meanwhile, their hardware support for PMC
has not announced externally. So exclude Nano CPUs from ZXC
by checking stepping information. This is an unambiguous way
to differentiate between ZXC and Nano CPUs.
Following are Nano and ZXC FMS information:
Nano FMS: Family=6, Model=F, Stepping=[0-A][C-D]
ZXC FMS: Family=6, Model=F, Stepping=E-F OR
Family=6, Model=0x19, Stepping=0-3
Fixes: 3a4ac121c2ca ("x86/perf: Add hardware performance events support for Zhaoxin CPU.")
Reported-by: Arjan <8vvbbqzo567a@nospam.xutrox.com>
Reported-by: Kevin Brace <kevinbrace@gmx.com>
Signed-off-by: silviazhao <silviazhao-oc@zhaoxin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212389
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/zhaoxin/core.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/x86/events/zhaoxin/core.c b/arch/x86/events/zhaoxin/core.c
index 949d845c922b4..3e9acdaeed1ec 100644
--- a/arch/x86/events/zhaoxin/core.c
+++ b/arch/x86/events/zhaoxin/core.c
@@ -541,7 +541,13 @@ __init int zhaoxin_pmu_init(void)
switch (boot_cpu_data.x86) {
case 0x06:
- if (boot_cpu_data.x86_model == 0x0f || boot_cpu_data.x86_model == 0x19) {
+ /*
+ * Support Zhaoxin CPU from ZXC series, exclude Nano series through FMS.
+ * Nano FMS: Family=6, Model=F, Stepping=[0-A][C-D]
+ * ZXC FMS: Family=6, Model=F, Stepping=E-F OR Family=6, Model=0x19, Stepping=0-3
+ */
+ if ((boot_cpu_data.x86_model == 0x0f && boot_cpu_data.x86_stepping >= 0x0e) ||
+ boot_cpu_data.x86_model == 0x19) {
x86_pmu.max_period = x86_pmu.cntval_mask >> 1;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 102/885] KEYS: asymmetric: Fix ECDSA use via keyctl uapi
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (100 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 101/885] x86/perf/zhaoxin: Add stepping check for ZXC Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 103/885] block: ublk: check IO buffer based on flag need_get_data Greg Kroah-Hartman
` (785 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Denis Kenzior, Stefan Berger,
Jarkko Sakkinen, Sasha Levin
From: Denis Kenzior <denkenz@gmail.com>
[ Upstream commit 10de7b54293995368c52d9aa153f3e7a359f04a1 ]
When support for ECDSA keys was added, constraints for data & signature
sizes were never updated. This makes it impossible to use such keys via
keyctl API from userspace.
Update constraint on max_data_size to 64 bytes in order to support
SHA512-based signatures. Also update the signature length constraints
per ECDSA signature encoding described in RFC 5480.
Fixes: 299f561a6693 ("x509: Add support for parsing x509 certs with ECDSA keys")
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
crypto/asymmetric_keys/public_key.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/crypto/asymmetric_keys/public_key.c b/crypto/asymmetric_keys/public_key.c
index 2f8352e888602..eca5671ad3f22 100644
--- a/crypto/asymmetric_keys/public_key.c
+++ b/crypto/asymmetric_keys/public_key.c
@@ -186,8 +186,28 @@ static int software_key_query(const struct kernel_pkey_params *params,
len = crypto_akcipher_maxsize(tfm);
info->key_size = len * 8;
- info->max_data_size = len;
- info->max_sig_size = len;
+
+ if (strncmp(pkey->pkey_algo, "ecdsa", 5) == 0) {
+ /*
+ * ECDSA key sizes are much smaller than RSA, and thus could
+ * operate on (hashed) inputs that are larger than key size.
+ * For example SHA384-hashed input used with secp256r1
+ * based keys. Set max_data_size to be at least as large as
+ * the largest supported hash size (SHA512)
+ */
+ info->max_data_size = 64;
+
+ /*
+ * Verify takes ECDSA-Sig (described in RFC 5480) as input,
+ * which is actually 2 'key_size'-bit integers encoded in
+ * ASN.1. Account for the ASN.1 encoding overhead here.
+ */
+ info->max_sig_size = 2 * (len + 3) + 2;
+ } else {
+ info->max_data_size = len;
+ info->max_sig_size = len;
+ }
+
info->max_enc_size = len;
info->max_dec_size = len;
info->supported_ops = (KEYCTL_SUPPORTS_ENCRYPT |
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 103/885] block: ublk: check IO buffer based on flag need_get_data
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (101 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 102/885] KEYS: asymmetric: Fix ECDSA use via keyctl uapi Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 104/885] arm64: dts: qcom: pmk8350: Specify PBS register for PON Greg Kroah-Hartman
` (784 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Liu Xiaodong, Ming Lei, Jens Axboe,
Sasha Levin
From: Liu Xiaodong <xiaodong.liu@intel.com>
[ Upstream commit 2f1e07dda1e1310873647abc40bbc49eaf3b10e3 ]
Currently, uring_cmd with UBLK_IO_FETCH_REQ or
UBLK_IO_COMMIT_AND_FETCH_REQ is always checked whether
userspace server has provided IO buffer even flag
UBLK_F_NEED_GET_DATA is configured.
This is a excessive check. If UBLK_F_NEED_GET_DATA is
configured, FETCH_RQ doesn't need to provide IO buffer;
COMMIT_AND_FETCH_REQ also doesn't need to do that if
the IO type is not READ.
Check ub_cmd->addr together with ublk_need_get_data()
and IO type in ublk_ch_uring_cmd().
With this fix, userspace server doesn't need to preserve
buffers for every ublk_io when flag UBLK_F_NEED_GET_DATA
is configured, in order to save memory.
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Fixes: c86019ff75c1 ("ublk_drv: add support for UBLK_IO_NEED_GET_DATA")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230210141356.112321-1-xiaodong.liu@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/ublk_drv.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 450bd54fd0061..4aec9be0ab77e 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1206,6 +1206,7 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
u32 cmd_op = cmd->cmd_op;
unsigned tag = ub_cmd->tag;
int ret = -EINVAL;
+ struct request *req;
pr_devel("%s: received: cmd op %d queue %d tag %d result %d\n",
__func__, cmd->cmd_op, ub_cmd->q_id, tag,
@@ -1256,8 +1257,8 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
*/
if (io->flags & UBLK_IO_FLAG_OWNED_BY_SRV)
goto out;
- /* FETCH_RQ has to provide IO buffer */
- if (!ub_cmd->addr)
+ /* FETCH_RQ has to provide IO buffer if NEED GET DATA is not enabled */
+ if (!ub_cmd->addr && !ublk_need_get_data(ubq))
goto out;
io->cmd = cmd;
io->flags |= UBLK_IO_FLAG_ACTIVE;
@@ -1266,8 +1267,12 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
ublk_mark_io_ready(ub, ubq);
break;
case UBLK_IO_COMMIT_AND_FETCH_REQ:
- /* FETCH_RQ has to provide IO buffer */
- if (!ub_cmd->addr)
+ req = blk_mq_tag_to_rq(ub->tag_set.tags[ub_cmd->q_id], tag);
+ /*
+ * COMMIT_AND_FETCH_REQ has to provide IO buffer if NEED GET DATA is
+ * not enabled or it is Read IO.
+ */
+ if (!ub_cmd->addr && (!ublk_need_get_data(ubq) || req_op(req) == REQ_OP_READ))
goto out;
if (!(io->flags & UBLK_IO_FLAG_OWNED_BY_SRV))
goto out;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 104/885] arm64: dts: qcom: pmk8350: Specify PBS register for PON
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (102 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 103/885] block: ublk: check IO buffer based on flag need_get_data Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 105/885] arm64: dts: qcom: pmk8350: Use the correct PON compatible Greg Kroah-Hartman
` (783 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Konrad Dybcio, Bjorn Andersson, Sasha Levin
From: Konrad Dybcio <konrad.dybcio@linaro.org>
[ Upstream commit f46ef374e0dcb8fd2f272a376cf0dcdab7e52fc2 ]
PMK8350 is the first PMIC to require both HLOS and PBS registers for
PON to function properly (at least in theory, sm8350 sees no change).
The support for it on the driver side has been added long ago,
but it has never been wired up. Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115132626.7465-1-konrad.dybcio@linaro.org
Stable-dep-of: c0ee8e0ba5cc ("arm64: dts: qcom: pmk8350: Use the correct PON compatible")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/pmk8350.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index a7ec9d11946df..ec002eecb19d9 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -17,7 +17,8 @@ pmk8350: pmic@0 {
pmk8350_pon: pon@1300 {
compatible = "qcom,pm8998-pon";
- reg = <0x1300>;
+ reg = <0x1300>, <0x800>;
+ reg-names = "hlos", "pbs";
pon_pwrkey: pwrkey {
compatible = "qcom,pmk8350-pwrkey";
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 105/885] arm64: dts: qcom: pmk8350: Use the correct PON compatible
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (103 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 104/885] arm64: dts: qcom: pmk8350: Specify PBS register for PON Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 106/885] erofs: relinquish volume with mutex held Greg Kroah-Hartman
` (782 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Konrad Dybcio, Bjorn Andersson, Sasha Levin
From: Konrad Dybcio <konrad.dybcio@linaro.org>
[ Upstream commit c0ee8e0ba5cc17623e63349a168b41e407b1eef0 ]
A special compatible was introduced for PMK8350 both in the driver and
the bindings to facilitate for 2 base registers (PBS & HLOS). Use it.
Fixes: b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213212930.2115182-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/pmk8350.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index ec002eecb19d9..f0d256d99e62e 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -16,7 +16,7 @@ pmk8350: pmic@0 {
#size-cells = <0>;
pmk8350_pon: pon@1300 {
- compatible = "qcom,pm8998-pon";
+ compatible = "qcom,pmk8350-pon";
reg = <0x1300>, <0x800>;
reg-names = "hlos", "pbs";
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 106/885] erofs: relinquish volume with mutex held
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (104 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 105/885] arm64: dts: qcom: pmk8350: Use the correct PON compatible Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 107/885] block: sync mixed merged requests failfast with 1st bios Greg Kroah-Hartman
` (781 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jingbo Xu, Jia Zhu, Gao Xiang, Sasha Levin
From: Jingbo Xu <jefflexu@linux.alibaba.com>
[ Upstream commit 7032809a44d752b9e2275833787e0aa88a7540af ]
Relinquish fscache volume with mutex held. Otherwise if a new domain is
registered when the old domain with the same name gets removed from the
list but not relinquished yet, fscache may complain the collision.
Fixes: 8b7adf1dff3d ("erofs: introduce fscache-based domain")
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Link: https://lore.kernel.org/r/20230209063913.46341-4-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/erofs/fscache.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/erofs/fscache.c b/fs/erofs/fscache.c
index b04f93bc062a8..076cf8a149ef3 100644
--- a/fs/erofs/fscache.c
+++ b/fs/erofs/fscache.c
@@ -398,8 +398,8 @@ static void erofs_fscache_domain_put(struct erofs_domain *domain)
kern_unmount(erofs_pseudo_mnt);
erofs_pseudo_mnt = NULL;
}
- mutex_unlock(&erofs_domain_list_lock);
fscache_relinquish_volume(domain->volume, NULL, false);
+ mutex_unlock(&erofs_domain_list_lock);
kfree(domain->domain_id);
kfree(domain);
return;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 107/885] block: sync mixed merged requests failfast with 1st bios
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (105 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 106/885] erofs: relinquish volume with mutex held Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 108/885] block: Fix io statistics for cgroup in throttle path Greg Kroah-Hartman
` (780 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tejun Heo, Ming Lei, Jens Axboe,
Sasha Levin
From: Ming Lei <ming.lei@redhat.com>
[ Upstream commit 3ce6a115980c019928fcd06e01f64003886af79c ]
We support mixed merge for requests/bios with different fastfail
settings. When request fails, each time we only handle the portion
with same failfast setting, then bios with failfast can be failed
immediately, and bios without failfast can be retried.
The idea is pretty good, but the current implementation has several
defects:
1) initially RA bio doesn't set failfast, however bio merge code
doesn't consider this point, and just check its failfast setting for
deciding if mixed merge is required. Fix this issue by adding helper
of bio_failfast().
2) when merging bio to request front, if this request is mixed
merged, we have to sync request's faifast setting with 1st bio's
failfast. Fix it by calling blk_update_mixed_merge().
3) when merging bio to request back, if this request is mixed
merged, we have to mark the bio as failfast, because blk_update_request
simply updates request failfast with 1st bio's failfast. Fix
it by calling blk_update_mixed_merge().
Fixes one normal EXT4 READ IO failure issue, because it is observed
that the normal READ IO is merged with RA IO, and the mixed merged
request has different failfast setting with 1st bio's, so finally
the normal READ IO doesn't get retried.
Cc: Tejun Heo <tj@kernel.org>
Fixes: 80a761fd33cf ("block: implement mixed merge of different failfast requests")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230209125527.667004-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-merge.c | 35 +++++++++++++++++++++++++++++++++--
1 file changed, 33 insertions(+), 2 deletions(-)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 84f03d066cb31..914da38523b5a 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -747,6 +747,33 @@ void blk_rq_set_mixed_merge(struct request *rq)
rq->rq_flags |= RQF_MIXED_MERGE;
}
+static inline unsigned int bio_failfast(const struct bio *bio)
+{
+ if (bio->bi_opf & REQ_RAHEAD)
+ return REQ_FAILFAST_MASK;
+
+ return bio->bi_opf & REQ_FAILFAST_MASK;
+}
+
+/*
+ * After we are marked as MIXED_MERGE, any new RA bio has to be updated
+ * as failfast, and request's failfast has to be updated in case of
+ * front merge.
+ */
+static inline void blk_update_mixed_merge(struct request *req,
+ struct bio *bio, bool front_merge)
+{
+ if (req->rq_flags & RQF_MIXED_MERGE) {
+ if (bio->bi_opf & REQ_RAHEAD)
+ bio->bi_opf |= REQ_FAILFAST_MASK;
+
+ if (front_merge) {
+ req->cmd_flags &= ~REQ_FAILFAST_MASK;
+ req->cmd_flags |= bio->bi_opf & REQ_FAILFAST_MASK;
+ }
+ }
+}
+
static void blk_account_io_merge_request(struct request *req)
{
if (blk_do_io_stat(req)) {
@@ -944,7 +971,7 @@ enum bio_merge_status {
static enum bio_merge_status bio_attempt_back_merge(struct request *req,
struct bio *bio, unsigned int nr_segs)
{
- const blk_opf_t ff = bio->bi_opf & REQ_FAILFAST_MASK;
+ const blk_opf_t ff = bio_failfast(bio);
if (!ll_back_merge_fn(req, bio, nr_segs))
return BIO_MERGE_FAILED;
@@ -955,6 +982,8 @@ static enum bio_merge_status bio_attempt_back_merge(struct request *req,
if ((req->cmd_flags & REQ_FAILFAST_MASK) != ff)
blk_rq_set_mixed_merge(req);
+ blk_update_mixed_merge(req, bio, false);
+
req->biotail->bi_next = bio;
req->biotail = bio;
req->__data_len += bio->bi_iter.bi_size;
@@ -968,7 +997,7 @@ static enum bio_merge_status bio_attempt_back_merge(struct request *req,
static enum bio_merge_status bio_attempt_front_merge(struct request *req,
struct bio *bio, unsigned int nr_segs)
{
- const blk_opf_t ff = bio->bi_opf & REQ_FAILFAST_MASK;
+ const blk_opf_t ff = bio_failfast(bio);
if (!ll_front_merge_fn(req, bio, nr_segs))
return BIO_MERGE_FAILED;
@@ -979,6 +1008,8 @@ static enum bio_merge_status bio_attempt_front_merge(struct request *req,
if ((req->cmd_flags & REQ_FAILFAST_MASK) != ff)
blk_rq_set_mixed_merge(req);
+ blk_update_mixed_merge(req, bio, true);
+
bio->bi_next = req->bio;
req->bio = bio;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 108/885] block: Fix io statistics for cgroup in throttle path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (106 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 107/885] block: sync mixed merged requests failfast with 1st bios Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 109/885] block: bio-integrity: Copy flags when bio_integrity_payload is cloned Greg Kroah-Hartman
` (779 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jinke Han, Ming Lei, Muchun Song,
Christoph Hellwig, Jens Axboe, Sasha Levin
From: Jinke Han <hanjinke.666@bytedance.com>
[ Upstream commit 0f7c8f0f7934c389b0f9fa1f151e753d8de6348f ]
In the current code, io statistics are missing for cgroup when bio
was throttled by blk-throttle. Fix it by moving the unreaching code
to submit_bio_noacct_nocheck.
Fixes: 3f98c753717c ("block: don't check bio in blk_throtl_dispatch_work_fn")
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230216032250.74230-1-hanjinke.666@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-core.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 5487912befe89..553afcdd638a6 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -672,6 +672,18 @@ static void __submit_bio_noacct_mq(struct bio *bio)
void submit_bio_noacct_nocheck(struct bio *bio)
{
+ blk_cgroup_bio_start(bio);
+ blkcg_bio_issue_init(bio);
+
+ if (!bio_flagged(bio, BIO_TRACE_COMPLETION)) {
+ trace_block_bio_queue(bio);
+ /*
+ * Now that enqueuing has been traced, we need to trace
+ * completion as well.
+ */
+ bio_set_flag(bio, BIO_TRACE_COMPLETION);
+ }
+
/*
* We only want one ->submit_bio to be active at a time, else stack
* usage with stacked devices could be a problem. Use current->bio_list
@@ -776,17 +788,6 @@ void submit_bio_noacct(struct bio *bio)
if (blk_throtl_bio(bio))
return;
-
- blk_cgroup_bio_start(bio);
- blkcg_bio_issue_init(bio);
-
- if (!bio_flagged(bio, BIO_TRACE_COMPLETION)) {
- trace_block_bio_queue(bio);
- /* Now that enqueuing has been traced, we need to trace
- * completion as well.
- */
- bio_set_flag(bio, BIO_TRACE_COMPLETION);
- }
submit_bio_noacct_nocheck(bio);
return;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 109/885] block: bio-integrity: Copy flags when bio_integrity_payload is cloned
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (107 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 108/885] block: Fix io statistics for cgroup in throttle path Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 110/885] block: use proper return value from bio_failfast() Greg Kroah-Hartman
` (778 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Saurav Kashyap, Martin K. Petersen,
Christoph Hellwig, Chaitanya Kulkarni, Jens Axboe, Sasha Levin
From: Martin K. Petersen <martin.petersen@oracle.com>
[ Upstream commit b6a4bdcda430e3ca43bbb9cb1d4d4d34ebe15c40 ]
Make sure to copy the flags when a bio_integrity_payload is cloned.
Otherwise per-I/O properties such as IP checksum flag will not be
passed down to the HBA driver. Since the integrity buffer is owned by
the original bio, the BIP_BLOCK_INTEGRITY flag needs to be masked off
to avoid a double free in the completion path.
Fixes: aae7df50190a ("block: Integrity checksum flag")
Fixes: b1f01388574c ("block: Relocate bio integrity flags")
Reported-by: Saurav Kashyap <skashyap@marvell.com>
Tested-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230215171801.21062-1-martin.petersen@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/bio-integrity.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/block/bio-integrity.c b/block/bio-integrity.c
index 3f5685c00e360..91ffee6fc8cb4 100644
--- a/block/bio-integrity.c
+++ b/block/bio-integrity.c
@@ -418,6 +418,7 @@ int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
bip->bip_vcnt = bip_src->bip_vcnt;
bip->bip_iter = bip_src->bip_iter;
+ bip->bip_flags = bip_src->bip_flags & ~BIP_BLOCK_INTEGRITY;
return 0;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 110/885] block: use proper return value from bio_failfast()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (108 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 109/885] block: bio-integrity: Copy flags when bio_integrity_payload is cloned Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 111/885] wifi: mt76: mt7915: add missing of_node_put() Greg Kroah-Hartman
` (777 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernel test robot, Jens Axboe, Sasha Levin
From: Jens Axboe <axboe@kernel.dk>
[ Upstream commit f3ca73862453ac1e64fc6968a14bf66d839cd2d8 ]
kernel test robot complains about a type mismatch:
block/blk-merge.c:984:42: sparse: expected restricted blk_opf_t const [usertype] ff
block/blk-merge.c:984:42: sparse: got unsigned int
block/blk-merge.c:1010:42: sparse: sparse: incorrect type in initializer (different base types) @@ expected restricted blk_opf_t const [usertype] ff @@ got unsigned int @@
block/blk-merge.c:1010:42: sparse: expected restricted blk_opf_t const [usertype] ff
block/blk-merge.c:1010:42: sparse: got unsigned int
because bio_failfast() is return an unsigned int rather than the
appropriate blk_opt_f type. Fix it up.
Fixes: 3ce6a115980c ("block: sync mixed merged request's failfast with 1st bio's")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302170743.GXypM9Rt-lkp@intel.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-merge.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 914da38523b5a..17ac532105a97 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -747,7 +747,7 @@ void blk_rq_set_mixed_merge(struct request *rq)
rq->rq_flags |= RQF_MIXED_MERGE;
}
-static inline unsigned int bio_failfast(const struct bio *bio)
+static inline blk_opf_t bio_failfast(const struct bio *bio)
{
if (bio->bi_opf & REQ_RAHEAD)
return REQ_FAILFAST_MASK;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 111/885] wifi: mt76: mt7915: add missing of_node_put()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (109 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 110/885] block: use proper return value from bio_failfast() Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 112/885] wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host Greg Kroah-Hartman
` (776 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wang Yufen, Felix Fietkau, Sasha Levin
From: Wang Yufen <wangyufen@huawei.com>
[ Upstream commit 18425d7d74c5be88b13b970a21e52e2498abf4ba ]
Add missing of_node_put() after of_reserved_mem_lookup()
Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7915/soc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/soc.c b/drivers/net/wireless/mediatek/mt76/mt7915/soc.c
index c74afa746251b..ee7ddda4288b8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/soc.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/soc.c
@@ -278,6 +278,7 @@ static int mt7986_wmac_coninfra_setup(struct mt7915_dev *dev)
return -EINVAL;
rmem = of_reserved_mem_lookup(np);
+ of_node_put(np);
if (!rmem)
return -EINVAL;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 112/885] wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (110 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 111/885] wifi: mt76: mt7915: add missing of_node_put() Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 113/885] wifi: mt76: mt7915: check return value before accessing free_block_num Greg Kroah-Hartman
` (775 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lorenzo Bianconi, YN Chen, Deren Wu,
Felix Fietkau, Sasha Levin
From: Deren Wu <deren.wu@mediatek.com>
[ Upstream commit aec4cf2ea0797e28f18f8dbe01943a56d987fe56 ]
SDIO may need addtional 511 bytes to align bus operation. If the tailroom
of this skb is not big enough, we would access invalid memory region.
For low level operation, increase skb size to keep valid memory access in
SDIO host.
Error message:
[69.951] BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0xe9/0x1a0
[69.951] Read of size 64 at addr ffff88811c9cf000 by task kworker/u16:7/451
[69.951] CPU: 4 PID: 451 Comm: kworker/u16:7 Tainted: G W OE 6.1.0-rc5 #1
[69.951] Workqueue: kvub300c vub300_cmndwork_thread [vub300]
[69.951] Call Trace:
[69.951] <TASK>
[69.952] dump_stack_lvl+0x49/0x63
[69.952] print_report+0x171/0x4a8
[69.952] kasan_report+0xb4/0x130
[69.952] kasan_check_range+0x149/0x1e0
[69.952] memcpy+0x24/0x70
[69.952] sg_copy_buffer+0xe9/0x1a0
[69.952] sg_copy_to_buffer+0x12/0x20
[69.952] __command_write_data.isra.0+0x23c/0xbf0 [vub300]
[69.952] vub300_cmndwork_thread+0x17f3/0x58b0 [vub300]
[69.952] process_one_work+0x7ee/0x1320
[69.952] worker_thread+0x53c/0x1240
[69.952] kthread+0x2b8/0x370
[69.952] ret_from_fork+0x1f/0x30
[69.952] </TASK>
[69.952] Allocated by task 854:
[69.952] kasan_save_stack+0x26/0x50
[69.952] kasan_set_track+0x25/0x30
[69.952] kasan_save_alloc_info+0x1b/0x30
[69.952] __kasan_kmalloc+0x87/0xa0
[69.952] __kmalloc_node_track_caller+0x63/0x150
[69.952] kmalloc_reserve+0x31/0xd0
[69.952] __alloc_skb+0xfc/0x2b0
[69.952] __mt76_mcu_msg_alloc+0xbf/0x230 [mt76]
[69.952] mt76_mcu_send_and_get_msg+0xab/0x110 [mt76]
[69.952] __mt76_mcu_send_firmware.cold+0x94/0x15d [mt76]
[69.952] mt76_connac_mcu_send_ram_firmware+0x415/0x54d [mt76_connac_lib]
[69.952] mt76_connac2_load_ram.cold+0x118/0x4bc [mt76_connac_lib]
[69.952] mt7921_run_firmware.cold+0x2e9/0x405 [mt7921_common]
[69.952] mt7921s_mcu_init+0x45/0x80 [mt7921s]
[69.953] mt7921_init_work+0xe1/0x2a0 [mt7921_common]
[69.953] process_one_work+0x7ee/0x1320
[69.953] worker_thread+0x53c/0x1240
[69.953] kthread+0x2b8/0x370
[69.953] ret_from_fork+0x1f/0x30
[69.953] The buggy address belongs to the object at ffff88811c9ce800
which belongs to the cache kmalloc-2k of size 2048
[69.953] The buggy address is located 0 bytes to the right of
2048-byte region [ffff88811c9ce800, ffff88811c9cf000)
[69.953] Memory state around the buggy address:
[69.953] ffff88811c9cef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[69.953] ffff88811c9cef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[69.953] >ffff88811c9cf000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69.953] ^
[69.953] ffff88811c9cf080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69.953] ffff88811c9cf100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 764dee47e2c1 ("mt76: sdio: move common code in mt76_sdio module")
Suggested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/sdio_txrx.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
index bfc4de50a4d23..ddd8c0cc744df 100644
--- a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
+++ b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
@@ -254,6 +254,10 @@ static int mt76s_tx_run_queue(struct mt76_dev *dev, struct mt76_queue *q)
if (!test_bit(MT76_STATE_MCU_RUNNING, &dev->phy.state)) {
__skb_put_zero(e->skb, 4);
+ err = __skb_grow(e->skb, roundup(e->skb->len,
+ sdio->func->cur_blksize));
+ if (err)
+ return err;
err = __mt76s_xmit_queue(dev, e->skb->data,
e->skb->len);
if (err)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 113/885] wifi: mt76: mt7915: check return value before accessing free_block_num
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (111 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 112/885] wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 114/885] wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr() Greg Kroah-Hartman
` (774 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Ryder Lee, Felix Fietkau, Sasha Levin
From: Ryder Lee <ryder.lee@mediatek.com>
[ Upstream commit 59b27a7d472f100ac8998e15a63c47a03cced12a ]
Check return value of mt7915_mcu_get_eeprom_free_block() first before
accessing free_block_num.
Fixes: bbc1d4154ec1 ("mt76: mt7915: add default calibrated data support")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../wireless/mediatek/mt76/mt7915/eeprom.c | 19 ++++++++++++-------
.../net/wireless/mediatek/mt76/mt7915/mcu.c | 10 ++++++----
2 files changed, 18 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
index 0bce0ce51be00..f0ec000d46cf7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
@@ -110,18 +110,23 @@ static int mt7915_eeprom_load(struct mt7915_dev *dev)
} else {
u8 free_block_num;
u32 block_num, i;
+ u32 eeprom_blk_size = MT7915_EEPROM_BLOCK_SIZE;
- mt7915_mcu_get_eeprom_free_block(dev, &free_block_num);
- /* efuse info not enough */
+ ret = mt7915_mcu_get_eeprom_free_block(dev, &free_block_num);
+ if (ret < 0)
+ return ret;
+
+ /* efuse info isn't enough */
if (free_block_num >= 29)
return -EINVAL;
/* read eeprom data from efuse */
- block_num = DIV_ROUND_UP(eeprom_size,
- MT7915_EEPROM_BLOCK_SIZE);
- for (i = 0; i < block_num; i++)
- mt7915_mcu_get_eeprom(dev,
- i * MT7915_EEPROM_BLOCK_SIZE);
+ block_num = DIV_ROUND_UP(eeprom_size, eeprom_blk_size);
+ for (i = 0; i < block_num; i++) {
+ ret = mt7915_mcu_get_eeprom(dev, i * eeprom_blk_size);
+ if (ret < 0)
+ return ret;
+ }
}
return mt7915_check_eeprom(dev);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 8d297e4aa7d43..c4843f4de34ff 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -2743,8 +2743,9 @@ int mt7915_mcu_get_eeprom(struct mt7915_dev *dev, u32 offset)
int ret;
u8 *buf;
- ret = mt76_mcu_send_and_get_msg(&dev->mt76, MCU_EXT_QUERY(EFUSE_ACCESS), &req,
- sizeof(req), true, &skb);
+ ret = mt76_mcu_send_and_get_msg(&dev->mt76,
+ MCU_EXT_QUERY(EFUSE_ACCESS),
+ &req, sizeof(req), true, &skb);
if (ret)
return ret;
@@ -2769,8 +2770,9 @@ int mt7915_mcu_get_eeprom_free_block(struct mt7915_dev *dev, u8 *block_num)
struct sk_buff *skb;
int ret;
- ret = mt76_mcu_send_and_get_msg(&dev->mt76, MCU_EXT_QUERY(EFUSE_FREE_BLOCK), &req,
- sizeof(req), true, &skb);
+ ret = mt76_mcu_send_and_get_msg(&dev->mt76,
+ MCU_EXT_QUERY(EFUSE_FREE_BLOCK),
+ &req, sizeof(req), true, &skb);
if (ret)
return ret;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 114/885] wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (112 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 113/885] wifi: mt76: mt7915: check return value before accessing free_block_num Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 115/885] wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read() Greg Kroah-Hartman
` (773 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernel test robot, Ryder Lee,
Felix Fietkau, Sasha Levin
From: Ryder Lee <ryder.lee@mediatek.com>
[ Upstream commit b0f7b9563358493dfe70d3e4c3ebeffc92d4b494 ]
smatch warnings:
addr <= MT_CBTOP2_PHY_END(0xffffffff) is always true (<= u32max),
so drop it.
Fixes: cd4c314a65d3 ("mt76: mt7915: refine register definition")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7915/mmio.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7915/regs.h | 1 -
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
index 7bd5f6725d7b7..bc68ede64ddbb 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
@@ -436,7 +436,7 @@ static u32 __mt7915_reg_addr(struct mt7915_dev *dev, u32 addr)
if (dev_is_pci(dev->mt76.dev) &&
((addr >= MT_CBTOP1_PHY_START && addr <= MT_CBTOP1_PHY_END) ||
- (addr >= MT_CBTOP2_PHY_START && addr <= MT_CBTOP2_PHY_END)))
+ addr >= MT_CBTOP2_PHY_START))
return mt7915_reg_map_l1(dev, addr);
/* CONN_INFRA: covert to phyiscal addr and use layer 1 remap */
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/regs.h b/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
index 5920e705835a7..bf569aa0057a7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
@@ -740,7 +740,6 @@ enum offs_rev {
#define MT_CBTOP1_PHY_START 0x70000000
#define MT_CBTOP1_PHY_END __REG(CBTOP1_PHY_END)
#define MT_CBTOP2_PHY_START 0xf0000000
-#define MT_CBTOP2_PHY_END 0xffffffff
#define MT_INFRA_MCU_START 0x7c000000
#define MT_INFRA_MCU_END __REG(INFRA_MCU_ADDR_END)
#define MT_CONN_INFRA_OFFSET(p) ((p) - MT_INFRA_BASE)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 115/885] wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (113 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 114/885] wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr() Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 116/885] wifi: mt76: fix coverity uninit_use_in_call in mt76_connac2_reverse_frag0_hdr_trans() Greg Kroah-Hartman
` (772 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Ryder Lee, Felix Fietkau, Sasha Levin
From: Ryder Lee <ryder.lee@mediatek.com>
[ Upstream commit edb0406bda4629ef496f52eb11cbea7e92ed301b ]
In the expression "map[i].qid << 24" starts as u8, but is promoted to
"signed int", then sign-extended to type "unsigned long", which is not
intended. Cast to u32 to avoid the sign extension.
Fixes: 776ec4e77aa6 ("mt76: mt7915: rework debugfs queue info")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
index 6ef3431cad648..2975128a78c90 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
@@ -759,7 +759,7 @@ mt7915_hw_queue_read(struct seq_file *s, u32 size,
if (val & BIT(map[i].index))
continue;
- ctrl = BIT(31) | (map[i].pid << 10) | (map[i].qid << 24);
+ ctrl = BIT(31) | (map[i].pid << 10) | ((u32)map[i].qid << 24);
mt76_wr(dev, MT_FL_Q0_CTRL, ctrl);
head = mt76_get_field(dev, MT_FL_Q2_CTRL,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 116/885] wifi: mt76: fix coverity uninit_use_in_call in mt76_connac2_reverse_frag0_hdr_trans()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (114 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 115/885] wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read() Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 117/885] wifi: rsi: Fix memory leak in rsi_coex_attach() Greg Kroah-Hartman
` (771 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Deren Wu, Felix Fietkau, Sasha Levin
From: Deren Wu <deren.wu@mediatek.com>
[ Upstream commit 0ffcb2a68b15bd63d5555a923ae7dfe8bfdb14a7 ]
The default case for frame_contorl is invalid. We should always
assign addr3 of this frame properly.
Coverity error message:
if (ieee80211_has_a4(hdr.frame_control))
(19) Event uninit_use_in_call: Using uninitialized value "hdr".
Field "hdr.addr3" is uninitialized when calling "memcpy".
memcpy(skb_push(skb, sizeof(hdr)), &hdr, sizeof(hdr));
else
memcpy(skb_push(skb, sizeof(hdr) - 6), &hdr, sizeof(hdr) - 6);
Fixes: 0880d40871d1 ("mt76: connac: move mt76_connac2_reverse_frag0_hdr_trans in mt76-connac module")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c
index 34ac3d81a5102..46ede1b72bbee 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c
@@ -921,7 +921,7 @@ int mt76_connac2_reverse_frag0_hdr_trans(struct ieee80211_vif *vif,
ether_addr_copy(hdr.addr4, eth_hdr->h_source);
break;
default:
- break;
+ return -EINVAL;
}
skb_pull(skb, hdr_offset + sizeof(struct ethhdr) - 2);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 117/885] wifi: rsi: Fix memory leak in rsi_coex_attach()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (115 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 116/885] wifi: mt76: fix coverity uninit_use_in_call in mt76_connac2_reverse_frag0_hdr_trans() Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 118/885] wifi: rtlwifi: rtl8821ae: dont call kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
` (770 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Simon Horman, Kalle Valo,
Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 956fb851a6e19da5ab491e19c1bc323bb2c2cf6f ]
The coex_cb needs to be freed when rsi_create_kthread() failed in
rsi_coex_attach().
Fixes: 2108df3c4b18 ("rsi: add coex support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221205061441.114632-1-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/rsi/rsi_91x_coex.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/rsi/rsi_91x_coex.c b/drivers/net/wireless/rsi/rsi_91x_coex.c
index 8a3d86897ea8e..45ac9371f2621 100644
--- a/drivers/net/wireless/rsi/rsi_91x_coex.c
+++ b/drivers/net/wireless/rsi/rsi_91x_coex.c
@@ -160,6 +160,7 @@ int rsi_coex_attach(struct rsi_common *common)
rsi_coex_scheduler_thread,
"Coex-Tx-Thread")) {
rsi_dbg(ERR_ZONE, "%s: Unable to init tx thrd\n", __func__);
+ kfree(coex_cb);
return -EINVAL;
}
return 0;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 118/885] wifi: rtlwifi: rtl8821ae: dont call kfree_skb() under spin_lock_irqsave()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (116 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 117/885] wifi: rsi: Fix memory leak in rsi_coex_attach() Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 119/885] wifi: rtlwifi: rtl8188ee: " Greg Kroah-Hartman
` (769 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ping-Ke Shih,
Kalle Valo, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 106031c1f4a850915190d7ec1026696282f9359b ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. All the SKBs have
been dequeued from the old queue, so it's safe to enqueue these
SKBs to a free queue, then free them after spin_unlock_irqrestore()
at once. Compile tested only.
Fixes: 5c99f04fec93 ("rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207141411.46098-2-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index 7e0f62d59fe17..a7e3250957dc9 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -26,8 +26,10 @@ static void _rtl8821ae_return_beacon_queue_skb(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[BEACON_QUEUE];
+ struct sk_buff_head free_list;
unsigned long flags;
+ skb_queue_head_init(&free_list);
spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
while (skb_queue_len(&ring->queue)) {
struct rtl_tx_desc *entry = &ring->desc[ring->idx];
@@ -37,10 +39,12 @@ static void _rtl8821ae_return_beacon_queue_skb(struct ieee80211_hw *hw)
rtlpriv->cfg->ops->get_desc(hw, (u8 *)entry,
true, HW_DESC_TXBUFF_ADDR),
skb->len, DMA_TO_DEVICE);
- kfree_skb(skb);
+ __skb_queue_tail(&free_list, skb);
ring->idx = (ring->idx + 1) % ring->entries;
}
spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+
+ __skb_queue_purge(&free_list);
}
static void _rtl8821ae_set_bcn_ctrl_reg(struct ieee80211_hw *hw,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 119/885] wifi: rtlwifi: rtl8188ee: dont call kfree_skb() under spin_lock_irqsave()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (117 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 118/885] wifi: rtlwifi: rtl8821ae: dont call kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 120/885] wifi: rtlwifi: rtl8723be: " Greg Kroah-Hartman
` (768 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ping-Ke Shih,
Kalle Valo, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 2611687fa7ffc84190f92292de0b80468de17220 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. All the SKBs have
been dequeued from the old queue, so it's safe to enqueue these
SKBs to a free queue, then free them after spin_unlock_irqrestore()
at once. Compile tested only.
Fixes: 7fe3b3abb5da ("rtlwifi: rtl8188ee: rtl8821ae: Fix a queue locking problem")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207141411.46098-3-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
index 58c2ab3d44bef..de61c9c0ddec4 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
@@ -68,8 +68,10 @@ static void _rtl88ee_return_beacon_queue_skb(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[BEACON_QUEUE];
+ struct sk_buff_head free_list;
unsigned long flags;
+ skb_queue_head_init(&free_list);
spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
while (skb_queue_len(&ring->queue)) {
struct rtl_tx_desc *entry = &ring->desc[ring->idx];
@@ -79,10 +81,12 @@ static void _rtl88ee_return_beacon_queue_skb(struct ieee80211_hw *hw)
rtlpriv->cfg->ops->get_desc(hw, (u8 *)entry,
true, HW_DESC_TXBUFF_ADDR),
skb->len, DMA_TO_DEVICE);
- kfree_skb(skb);
+ __skb_queue_tail(&free_list, skb);
ring->idx = (ring->idx + 1) % ring->entries;
}
spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+
+ __skb_queue_purge(&free_list);
}
static void _rtl88ee_disable_bcn_sub_func(struct ieee80211_hw *hw)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 120/885] wifi: rtlwifi: rtl8723be: dont call kfree_skb() under spin_lock_irqsave()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (118 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 119/885] wifi: rtlwifi: rtl8188ee: " Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 121/885] wifi: iwlegacy: common: dont call dev_kfree_skb() " Greg Kroah-Hartman
` (767 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ping-Ke Shih,
Kalle Valo, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 313950c2114e7051c4e3020fd82495fa1fb526a8 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. All the SKBs have
been dequeued from the old queue, so it's safe to enqueue these
SKBs to a free queue, then free them after spin_unlock_irqrestore()
at once. Compile tested only.
Fixes: 5c99f04fec93 ("rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207141411.46098-4-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
index 189cc6437600f..0ba3bbed6ed36 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
@@ -30,8 +30,10 @@ static void _rtl8723be_return_beacon_queue_skb(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[BEACON_QUEUE];
+ struct sk_buff_head free_list;
unsigned long flags;
+ skb_queue_head_init(&free_list);
spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
while (skb_queue_len(&ring->queue)) {
struct rtl_tx_desc *entry = &ring->desc[ring->idx];
@@ -41,10 +43,12 @@ static void _rtl8723be_return_beacon_queue_skb(struct ieee80211_hw *hw)
rtlpriv->cfg->ops->get_desc(hw, (u8 *)entry,
true, HW_DESC_TXBUFF_ADDR),
skb->len, DMA_TO_DEVICE);
- kfree_skb(skb);
+ __skb_queue_tail(&free_list, skb);
ring->idx = (ring->idx + 1) % ring->entries;
}
spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+
+ __skb_queue_purge(&free_list);
}
static void _rtl8723be_set_bcn_ctrl_reg(struct ieee80211_hw *hw,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 121/885] wifi: iwlegacy: common: dont call dev_kfree_skb() under spin_lock_irqsave()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (119 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 120/885] wifi: rtlwifi: rtl8723be: " Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 122/885] wifi: libertas: fix memory leak in lbs_init_adapter() Greg Kroah-Hartman
` (766 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Stanislaw Gruszka,
Kalle Valo, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 0c1528675d7a9787cb516b64d8f6c0f6f8efcb48 ]
It is not allowed to call consume_skb() from hardware interrupt context
or with interrupts being disabled. So replace dev_kfree_skb() with
dev_consume_skb_irq() under spin_lock_irqsave(). Compile tested only.
Fixes: 4bc85c1324aa ("Revert "iwlwifi: split the drivers for agn and legacy devices 3945/4965"")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207144013.70210-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlegacy/common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlegacy/common.c b/drivers/net/wireless/intel/iwlegacy/common.c
index 341c17fe2af4d..96002121bb8b2 100644
--- a/drivers/net/wireless/intel/iwlegacy/common.c
+++ b/drivers/net/wireless/intel/iwlegacy/common.c
@@ -5174,7 +5174,7 @@ il_mac_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
memset(&il->current_ht_config, 0, sizeof(struct il_ht_config));
/* new association get rid of ibss beacon skb */
- dev_kfree_skb(il->beacon_skb);
+ dev_consume_skb_irq(il->beacon_skb);
il->beacon_skb = NULL;
il->timestamp = 0;
@@ -5293,7 +5293,7 @@ il_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
}
spin_lock_irqsave(&il->lock, flags);
- dev_kfree_skb(il->beacon_skb);
+ dev_consume_skb_irq(il->beacon_skb);
il->beacon_skb = skb;
timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 122/885] wifi: libertas: fix memory leak in lbs_init_adapter()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (120 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 121/885] wifi: iwlegacy: common: dont call dev_kfree_skb() " Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 123/885] wifi: rtl8xxxu: dont call dev_kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
` (765 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhengchao Shao, Jiri Pirko,
Kalle Valo, Sasha Levin
From: Zhengchao Shao <shaozhengchao@huawei.com>
[ Upstream commit 16a03958618fb91bb1bc7077cf3211055162cc2f ]
When kfifo_alloc() failed in lbs_init_adapter(), cmd buffer is not
released. Add free memory to processing error path.
Fixes: 7919b89c8276 ("libertas: convert libertas driver to use an event/cmdresp queue")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221208121448.2845986-1-shaozhengchao@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/marvell/libertas/main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/marvell/libertas/main.c b/drivers/net/wireless/marvell/libertas/main.c
index 8f5220cee1123..ae975304cfcfa 100644
--- a/drivers/net/wireless/marvell/libertas/main.c
+++ b/drivers/net/wireless/marvell/libertas/main.c
@@ -869,6 +869,7 @@ static int lbs_init_adapter(struct lbs_private *priv)
ret = kfifo_alloc(&priv->event_fifo, sizeof(u32) * 16, GFP_KERNEL);
if (ret) {
pr_err("Out of memory allocating event FIFO buffer\n");
+ lbs_free_cmd_buffer(priv);
goto out;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 123/885] wifi: rtl8xxxu: dont call dev_kfree_skb() under spin_lock_irqsave()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (121 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 122/885] wifi: libertas: fix memory leak in lbs_init_adapter() Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 124/885] wifi: rtw89: 8852c: rfk: correct DACK setting Greg Kroah-Hartman
` (764 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Ping-Ke Shih,
Kalle Valo, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 4c2005ac87685907b3719b4f40215b578efd27c4 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called to free and drop the SKB when
it's shutdown, so replace it with dev_kfree_skb_irq(). Compile tested
only.
Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221208143517.2383424-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index e445084e358f9..8d91939dea8cf 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5270,7 +5270,7 @@ static void rtl8xxxu_queue_rx_urb(struct rtl8xxxu_priv *priv,
pending = priv->rx_urb_pending_count;
} else {
skb = (struct sk_buff *)rx_urb->urb.context;
- dev_kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
usb_free_urb(&rx_urb->urb);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 124/885] wifi: rtw89: 8852c: rfk: correct DACK setting
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (122 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 123/885] wifi: rtl8xxxu: dont call dev_kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 125/885] wifi: rtw89: 8852c: rfk: correct DPK settings Greg Kroah-Hartman
` (763 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Ping-Ke Shih, Kalle Valo, Sasha Levin
From: Ping-Ke Shih <pkshih@realtek.com>
[ Upstream commit b2bab7b14098dcf5d405fa8c76b2c3f6ce9184f9 ]
After filling calibration parameters, set BIT(0) to enable the hardware
circuit, but original set incorrect bit that affects a little TX
performance.
Fixes: 76599a8d0b7d ("rtw89: 8852c: rfk: add DACK")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221209020940.9573-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c b/drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c
index 006c2cf931116..6387c834a73da 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c
@@ -338,7 +338,7 @@ static void _dack_reload_by_path(struct rtw89_dev *rtwdev,
(dack->dadck_d[path][index] << 14);
addr = 0xc210 + offset;
rtw89_phy_write32(rtwdev, addr, val32);
- rtw89_phy_write32_set(rtwdev, addr, BIT(1));
+ rtw89_phy_write32_set(rtwdev, addr, BIT(0));
}
static void _dack_reload(struct rtw89_dev *rtwdev, enum rtw89_rf_path path)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 125/885] wifi: rtw89: 8852c: rfk: correct DPK settings
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (123 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 124/885] wifi: rtw89: 8852c: rfk: correct DACK setting Greg Kroah-Hartman
@ 2023-03-07 16:50 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 126/885] wifi: rtlwifi: Fix global-out-of-bounds bug in _rtl8812ae_phy_set_txpower_limit() Greg Kroah-Hartman
` (762 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:50 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Ping-Ke Shih, Kalle Valo, Sasha Levin
From: Ping-Ke Shih <pkshih@realtek.com>
[ Upstream commit 21b5f159a2ee47d30f418559f6ece0088c80199f ]
Some DPK settings are wrong, and causes bad TX performance occasionally.
So, fix them by internal suggestions.
Fixes: da4cea16cb13 ("rtw89: 8852c: rfk: add DPK")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221209020940.9573-3-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtw89/reg.h | 2 ++
drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c | 9 ++++-----
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/reg.h b/drivers/net/wireless/realtek/rtw89/reg.h
index ca20bb024b407..0291aff940166 100644
--- a/drivers/net/wireless/realtek/rtw89/reg.h
+++ b/drivers/net/wireless/realtek/rtw89/reg.h
@@ -3374,6 +3374,8 @@
#define RR_TXRSV_GAPK BIT(19)
#define RR_BIAS 0x5e
#define RR_BIAS_GAPK BIT(19)
+#define RR_TXAC 0x5f
+#define RR_TXAC_IQG GENMASK(3, 0)
#define RR_BIASA 0x60
#define RR_BIASA_TXG GENMASK(15, 12)
#define RR_BIASA_TXA GENMASK(19, 16)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c b/drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c
index 6387c834a73da..98428f17814f5 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c
@@ -1873,12 +1873,11 @@ static void _dpk_rf_setting(struct rtw89_dev *rtwdev, u8 gain,
0x50101 | BIT(rtwdev->dbcc_en));
rtw89_write_rf(rtwdev, path, RR_MOD_V1, RR_MOD_MASK, RF_DPK);
- if (dpk->bp[path][kidx].band == RTW89_BAND_6G && dpk->bp[path][kidx].ch >= 161) {
+ if (dpk->bp[path][kidx].band == RTW89_BAND_6G && dpk->bp[path][kidx].ch >= 161)
rtw89_write_rf(rtwdev, path, RR_IQGEN, RR_IQGEN_BIAS, 0x8);
- rtw89_write_rf(rtwdev, path, RR_LOGEN, RR_LOGEN_RPT, 0xd);
- } else {
- rtw89_write_rf(rtwdev, path, RR_LOGEN, RR_LOGEN_RPT, 0xd);
- }
+
+ rtw89_write_rf(rtwdev, path, RR_LOGEN, RR_LOGEN_RPT, 0xd);
+ rtw89_write_rf(rtwdev, path, RR_TXAC, RR_TXAC_IQG, 0x8);
rtw89_write_rf(rtwdev, path, RR_RXA2, RR_RXA2_ATT, 0x0);
rtw89_write_rf(rtwdev, path, RR_TXIQK, RR_TXIQK_ATT2, 0x3);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 126/885] wifi: rtlwifi: Fix global-out-of-bounds bug in _rtl8812ae_phy_set_txpower_limit()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (124 preceding siblings ...)
2023-03-07 16:50 ` [PATCH 6.1 125/885] wifi: rtw89: 8852c: rfk: correct DPK settings Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 127/885] libbpf: Fix btf__align_of() by taking into account field offsets Greg Kroah-Hartman
` (761 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Li Zetao, Ping-Ke Shih, Kalle Valo,
Sasha Levin
From: Li Zetao <lizetao1@huawei.com>
[ Upstream commit 117dbeda22ec5ea0918254d03b540ef8b8a64d53 ]
There is a global-out-of-bounds reported by KASAN:
BUG: KASAN: global-out-of-bounds in
_rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae]
Read of size 1 at addr ffffffffa0773c43 by task NetworkManager/411
CPU: 6 PID: 411 Comm: NetworkManager Tainted: G D
6.1.0-rc8+ #144 e15588508517267d37
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
Call Trace:
<TASK>
...
kasan_report+0xbb/0x1c0
_rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae]
rtl8821ae_phy_bb_config.cold+0x346/0x641 [rtl8821ae]
rtl8821ae_hw_init+0x1f5e/0x79b0 [rtl8821ae]
...
</TASK>
The root cause of the problem is that the comparison order of
"prate_section" in _rtl8812ae_phy_set_txpower_limit() is wrong. The
_rtl8812ae_eq_n_byte() is used to compare the first n bytes of the two
strings from tail to head, which causes the problem. In the
_rtl8812ae_phy_set_txpower_limit(), it was originally intended to meet
this requirement by carefully designing the comparison order.
For example, "pregulation" and "pbandwidth" are compared in order of
length from small to large, first is 3 and last is 4. However, the
comparison order of "prate_section" dose not obey such order requirement,
therefore when "prate_section" is "HT", when comparing from tail to head,
it will lead to access out of bounds in _rtl8812ae_eq_n_byte(). As
mentioned above, the _rtl8812ae_eq_n_byte() has the same function as
strcmp(), so just strcmp() is enough.
Fix it by removing _rtl8812ae_eq_n_byte() and use strcmp() barely.
Although it can be fixed by adjusting the comparison order of
"prate_section", this may cause the value of "rate_section" to not be
from 0 to 5. In addition, commit "21e4b0726dc6" not only moved driver
from staging to regular tree, but also added setting txpower limit
function during the driver config phase, so the problem was introduced
by this commit.
Fixes: 21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221212025812.1541311-1-lizetao1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../wireless/realtek/rtlwifi/rtl8821ae/phy.c | 52 +++++++------------
1 file changed, 20 insertions(+), 32 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
index a29321e2fa72f..5323ead30db03 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
@@ -1598,18 +1598,6 @@ static bool _rtl8812ae_get_integer_from_string(const char *str, u8 *pint)
return true;
}
-static bool _rtl8812ae_eq_n_byte(const char *str1, const char *str2, u32 num)
-{
- if (num == 0)
- return false;
- while (num > 0) {
- num--;
- if (str1[num] != str2[num])
- return false;
- }
- return true;
-}
-
static s8 _rtl8812ae_phy_get_chnl_idx_of_txpwr_lmt(struct ieee80211_hw *hw,
u8 band, u8 channel)
{
@@ -1659,42 +1647,42 @@ static void _rtl8812ae_phy_set_txpower_limit(struct ieee80211_hw *hw,
power_limit = power_limit > MAX_POWER_INDEX ?
MAX_POWER_INDEX : power_limit;
- if (_rtl8812ae_eq_n_byte(pregulation, "FCC", 3))
+ if (strcmp(pregulation, "FCC") == 0)
regulation = 0;
- else if (_rtl8812ae_eq_n_byte(pregulation, "MKK", 3))
+ else if (strcmp(pregulation, "MKK") == 0)
regulation = 1;
- else if (_rtl8812ae_eq_n_byte(pregulation, "ETSI", 4))
+ else if (strcmp(pregulation, "ETSI") == 0)
regulation = 2;
- else if (_rtl8812ae_eq_n_byte(pregulation, "WW13", 4))
+ else if (strcmp(pregulation, "WW13") == 0)
regulation = 3;
- if (_rtl8812ae_eq_n_byte(prate_section, "CCK", 3))
+ if (strcmp(prate_section, "CCK") == 0)
rate_section = 0;
- else if (_rtl8812ae_eq_n_byte(prate_section, "OFDM", 4))
+ else if (strcmp(prate_section, "OFDM") == 0)
rate_section = 1;
- else if (_rtl8812ae_eq_n_byte(prate_section, "HT", 2) &&
- _rtl8812ae_eq_n_byte(prf_path, "1T", 2))
+ else if (strcmp(prate_section, "HT") == 0 &&
+ strcmp(prf_path, "1T") == 0)
rate_section = 2;
- else if (_rtl8812ae_eq_n_byte(prate_section, "HT", 2) &&
- _rtl8812ae_eq_n_byte(prf_path, "2T", 2))
+ else if (strcmp(prate_section, "HT") == 0 &&
+ strcmp(prf_path, "2T") == 0)
rate_section = 3;
- else if (_rtl8812ae_eq_n_byte(prate_section, "VHT", 3) &&
- _rtl8812ae_eq_n_byte(prf_path, "1T", 2))
+ else if (strcmp(prate_section, "VHT") == 0 &&
+ strcmp(prf_path, "1T") == 0)
rate_section = 4;
- else if (_rtl8812ae_eq_n_byte(prate_section, "VHT", 3) &&
- _rtl8812ae_eq_n_byte(prf_path, "2T", 2))
+ else if (strcmp(prate_section, "VHT") == 0 &&
+ strcmp(prf_path, "2T") == 0)
rate_section = 5;
- if (_rtl8812ae_eq_n_byte(pbandwidth, "20M", 3))
+ if (strcmp(pbandwidth, "20M") == 0)
bandwidth = 0;
- else if (_rtl8812ae_eq_n_byte(pbandwidth, "40M", 3))
+ else if (strcmp(pbandwidth, "40M") == 0)
bandwidth = 1;
- else if (_rtl8812ae_eq_n_byte(pbandwidth, "80M", 3))
+ else if (strcmp(pbandwidth, "80M") == 0)
bandwidth = 2;
- else if (_rtl8812ae_eq_n_byte(pbandwidth, "160M", 4))
+ else if (strcmp(pbandwidth, "160M") == 0)
bandwidth = 3;
- if (_rtl8812ae_eq_n_byte(pband, "2.4G", 4)) {
+ if (strcmp(pband, "2.4G") == 0) {
ret = _rtl8812ae_phy_get_chnl_idx_of_txpwr_lmt(hw,
BAND_ON_2_4G,
channel);
@@ -1718,7 +1706,7 @@ static void _rtl8812ae_phy_set_txpower_limit(struct ieee80211_hw *hw,
regulation, bandwidth, rate_section, channel_index,
rtlphy->txpwr_limit_2_4g[regulation][bandwidth]
[rate_section][channel_index][RF90_PATH_A]);
- } else if (_rtl8812ae_eq_n_byte(pband, "5G", 2)) {
+ } else if (strcmp(pband, "5G") == 0) {
ret = _rtl8812ae_phy_get_chnl_idx_of_txpwr_lmt(hw,
BAND_ON_5G,
channel);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 127/885] libbpf: Fix btf__align_of() by taking into account field offsets
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (125 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 126/885] wifi: rtlwifi: Fix global-out-of-bounds bug in _rtl8812ae_phy_set_txpower_limit() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 128/885] wifi: ipw2x00: dont call dev_kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
` (760 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrii Nakryiko, Daniel Borkmann,
Sasha Levin
From: Andrii Nakryiko <andrii@kernel.org>
[ Upstream commit 25a4481b4136af7794e1df2d6c90ed2f354d60ce ]
btf__align_of() is supposed to be return alignment requirement of
a requested BTF type. For STRUCT/UNION it doesn't always return correct
value, because it calculates alignment only based on field types. But
for packed structs this is not enough, we need to also check field
offsets and struct size. If field offset isn't aligned according to
field type's natural alignment, then struct must be packed. Similarly,
if struct size is not a multiple of struct's natural alignment, then
struct must be packed as well.
This patch fixes this issue precisely by additionally checking these
conditions.
Fixes: 3d208f4ca111 ("libbpf: Expose btf__align_of() API")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-5-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/btf.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c
index 675a0df5c840f..8224a797c2da5 100644
--- a/tools/lib/bpf/btf.c
+++ b/tools/lib/bpf/btf.c
@@ -688,8 +688,21 @@ int btf__align_of(const struct btf *btf, __u32 id)
if (align <= 0)
return libbpf_err(align);
max_align = max(max_align, align);
+
+ /* if field offset isn't aligned according to field
+ * type's alignment, then struct must be packed
+ */
+ if (btf_member_bitfield_size(t, i) == 0 &&
+ (m->offset % (8 * align)) != 0)
+ return 1;
}
+ /* if struct/union size isn't a multiple of its alignment,
+ * then struct must be packed
+ */
+ if ((t->size % max_align) != 0)
+ return 1;
+
return max_align;
}
default:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 128/885] wifi: ipw2x00: dont call dev_kfree_skb() under spin_lock_irqsave()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (126 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 127/885] libbpf: Fix btf__align_of() by taking into account field offsets Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 129/885] wifi: ipw2200: fix memory leak in ipw_wdev_init() Greg Kroah-Hartman
` (759 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Kalle Valo, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 45fc6d7461f18df2f238caf0cbc5acc4163203d1 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called to free and drop the SKB when
it's reset, so replace it with dev_kfree_skb_irq(). Compile tested
only.
Fixes: 43f66a6ce8da ("Add ipw2200 wireless driver.")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221208143826.2385218-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/ipw2x00/ipw2200.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2200.c b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
index 5b483de18c81f..1d088f9b1b443 100644
--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
@@ -3441,7 +3441,7 @@ static void ipw_rx_queue_reset(struct ipw_priv *priv,
dma_unmap_single(&priv->pci_dev->dev,
rxq->pool[i].dma_addr,
IPW_RX_BUF_SIZE, DMA_FROM_DEVICE);
- dev_kfree_skb(rxq->pool[i].skb);
+ dev_kfree_skb_irq(rxq->pool[i].skb);
rxq->pool[i].skb = NULL;
}
list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 129/885] wifi: ipw2200: fix memory leak in ipw_wdev_init()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (127 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 128/885] wifi: ipw2x00: dont call dev_kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 130/885] wifi: wilc1000: fix potential memory leak in wilc_mac_xmit() Greg Kroah-Hartman
` (758 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhengchao Shao, Kalle Valo, Sasha Levin
From: Zhengchao Shao <shaozhengchao@huawei.com>
[ Upstream commit 9fe21dc626117fb44a8eb393713a86a620128ce3 ]
In the error path of ipw_wdev_init(), exception value is returned, and
the memory applied for in the function is not released. Also the memory
is not released in ipw_pci_probe(). As a result, memory leakage occurs.
So memory release needs to be added to the error path of ipw_wdev_init().
Fixes: a3caa99e6c68 ("libipw: initiate cfg80211 API conversion (v2)")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221209012422.182669-1-shaozhengchao@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/ipw2x00/ipw2200.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2200.c b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
index 1d088f9b1b443..9dfa34a740dc9 100644
--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
@@ -11397,9 +11397,14 @@ static int ipw_wdev_init(struct net_device *dev)
set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
/* With that information in place, we can now register the wiphy... */
- if (wiphy_register(wdev->wiphy))
- rc = -EIO;
+ rc = wiphy_register(wdev->wiphy);
+ if (rc)
+ goto out;
+
+ return 0;
out:
+ kfree(priv->ieee->a_band.channels);
+ kfree(priv->ieee->bg_band.channels);
return rc;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 130/885] wifi: wilc1000: fix potential memory leak in wilc_mac_xmit()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (128 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 129/885] wifi: ipw2200: fix memory leak in ipw_wdev_init() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 131/885] wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init() Greg Kroah-Hartman
` (757 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Changzhong, Kalle Valo, Sasha Levin
From: Zhang Changzhong <zhangchangzhong@huawei.com>
[ Upstream commit deb962ec9e1c9a81babd3d37542ad4bd6ac3396e ]
The wilc_mac_xmit() returns NETDEV_TX_OK without freeing skb, add
dev_kfree_skb() to fix it. Compile tested only.
Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1668684964-48622-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/microchip/wilc1000/netdev.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 9b319a455b96d..6f3ae0dff77ce 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -730,6 +730,7 @@ netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *ndev)
if (skb->dev != ndev) {
netdev_err(ndev, "Packet not destined to this device\n");
+ dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 131/885] wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (129 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 130/885] wifi: wilc1000: fix potential memory leak in wilc_mac_xmit() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 132/885] wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit() Greg Kroah-Hartman
` (756 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Wang Yufen, Kalle Valo, Sasha Levin
From: Wang Yufen <wangyufen@huawei.com>
[ Upstream commit 2b88974ecb358990e1c33fabcd0b9e142bab7f21 ]
Fault injection test reports this issue:
kernel BUG at net/core/dev.c:10731!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
Call Trace:
<TASK>
wilc_netdev_ifc_init+0x19f/0x220 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5]
wilc_cfg80211_init+0x30c/0x380 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5]
wilc_bus_probe+0xad/0x2b0 [wilc1000_spi 1520a7539b6589cc6cde2ae826a523a33f8bacff]
spi_probe+0xe4/0x140
really_probe+0x17e/0x3f0
__driver_probe_device+0xe3/0x170
driver_probe_device+0x49/0x120
The root case here is alloc_ordered_workqueue() fails, but
cfg80211_unregister_netdevice() or unregister_netdev() not be called in
error handling path. To fix add unregister_netdev goto lable to add the
unregister operation in error handling path.
Fixes: 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1669289902-23639-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/microchip/wilc1000/netdev.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 6f3ae0dff77ce..e9f59de31b0b9 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -981,7 +981,7 @@ struct wilc_vif *wilc_netdev_ifc_init(struct wilc *wl, const char *name,
ndev->name);
if (!wl->hif_workqueue) {
ret = -ENOMEM;
- goto error;
+ goto unregister_netdev;
}
ndev->needs_free_netdev = true;
@@ -996,6 +996,11 @@ struct wilc_vif *wilc_netdev_ifc_init(struct wilc *wl, const char *name,
return vif;
+unregister_netdev:
+ if (rtnl_locked)
+ cfg80211_unregister_netdevice(ndev);
+ else
+ unregister_netdev(ndev);
error:
free_netdev(ndev);
return ERR_PTR(ret);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 132/885] wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (130 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 131/885] wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 133/885] wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid() Greg Kroah-Hartman
` (755 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Changzhong, Arend van Spriel,
Kalle Valo, Sasha Levin
From: Zhang Changzhong <zhangchangzhong@huawei.com>
[ Upstream commit 212fde3fe76e962598ce1d47b97cc78afdfc71b3 ]
The brcmf_netdev_start_xmit() returns NETDEV_TX_OK without freeing skb
in case of pskb_expand_head() fails, add dev_kfree_skb() to fix it.
Compile tested only.
Fixes: 270a6c1f65fe ("brcmfmac: rework headroom check in .start_xmit()")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1668684782-47422-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index 595ae3ae561ef..175272c2694d7 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -335,6 +335,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb,
bphy_err(drvr, "%s: failed to expand headroom\n",
brcmf_ifname(ifp));
atomic_inc(&drvr->bus_if->stats.pktcow_failed);
+ dev_kfree_skb(skb);
goto done;
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 133/885] wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (131 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 132/885] wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 134/885] wifi: libertas_tf: dont call kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
` (754 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhengchao Shao,
Sebastian Andrzej Siewior, Kalle Valo, Sasha Levin
From: Zhengchao Shao <shaozhengchao@huawei.com>
[ Upstream commit b9f420032f2ba1e634b22ca7b433e5c40ea663af ]
After the DMA buffer is mapped to a physical address, address is stored
in pktids in brcmf_msgbuf_alloc_pktid(). Then, pktids is parsed in
brcmf_msgbuf_get_pktid()/brcmf_msgbuf_release_array() to obtain physaddr
and later unmap the DMA buffer. But when count is always equal to
pktids->array_size, physaddr isn't stored in pktids and the DMA buffer
will not be unmapped anyway.
Fixes: 9a1bb60250d2 ("brcmfmac: Adding msgbuf protocol.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207013114.1748936-1-shaozhengchao@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
index cec53f934940a..45fbcbdc7d9e4 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
@@ -347,8 +347,11 @@ brcmf_msgbuf_alloc_pktid(struct device *dev,
count++;
} while (count < pktids->array_size);
- if (count == pktids->array_size)
+ if (count == pktids->array_size) {
+ dma_unmap_single(dev, *physaddr, skb->len - data_offset,
+ pktids->direction);
return -ENOMEM;
+ }
array[*idx].data_offset = data_offset;
array[*idx].physaddr = *physaddr;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 134/885] wifi: libertas_tf: dont call kfree_skb() under spin_lock_irqsave()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (132 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 133/885] wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 135/885] wifi: libertas: if_usb: " Greg Kroah-Hartman
` (753 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Kalle Valo, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 9388ce97b98216833c969191ee6df61a7201d797 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes: fc75122fabb5 ("libertas_tf: use irqsave() in USB's complete callback")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150008.111743-2-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/marvell/libertas_tf/if_usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/libertas_tf/if_usb.c b/drivers/net/wireless/marvell/libertas_tf/if_usb.c
index 75b5319d033f3..1750f5e93de21 100644
--- a/drivers/net/wireless/marvell/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas_tf/if_usb.c
@@ -613,7 +613,7 @@ static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
spin_lock_irqsave(&priv->driver_lock, flags);
memcpy(priv->cmd_resp_buff, recvbuff + MESSAGE_HEADER_LEN,
recvlength - MESSAGE_HEADER_LEN);
- kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
lbtf_cmd_response_rx(priv);
spin_unlock_irqrestore(&priv->driver_lock, flags);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 135/885] wifi: libertas: if_usb: dont call kfree_skb() under spin_lock_irqsave()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (133 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 134/885] wifi: libertas_tf: dont call kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 136/885] wifi: libertas: main: " Greg Kroah-Hartman
` (752 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Kalle Valo, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 3968e81ba644f10a7d45bae2539560db9edac501 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes: a3128feef6d5 ("libertas: use irqsave() in USB's complete callback")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150008.111743-3-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/marvell/libertas/if_usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/libertas/if_usb.c b/drivers/net/wireless/marvell/libertas/if_usb.c
index 32fdc4150b605..2240b4db8c036 100644
--- a/drivers/net/wireless/marvell/libertas/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas/if_usb.c
@@ -637,7 +637,7 @@ static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
priv->resp_len[i] = (recvlength - MESSAGE_HEADER_LEN);
memcpy(priv->resp_buf[i], recvbuff + MESSAGE_HEADER_LEN,
priv->resp_len[i]);
- kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
lbs_notify_command_response(priv, i);
spin_unlock_irqrestore(&priv->driver_lock, flags);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 136/885] wifi: libertas: main: dont call kfree_skb() under spin_lock_irqsave()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (134 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 135/885] wifi: libertas: if_usb: " Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 137/885] wifi: libertas: cmdresp: " Greg Kroah-Hartman
` (751 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Kalle Valo, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit f393df151540bf858effbd29ff572ab94e76a4c4 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes: d2e7b3425c47 ("libertas: disable functionality when interface is down")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150008.111743-4-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/marvell/libertas/main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/libertas/main.c b/drivers/net/wireless/marvell/libertas/main.c
index ae975304cfcfa..78e8b5aecec0e 100644
--- a/drivers/net/wireless/marvell/libertas/main.c
+++ b/drivers/net/wireless/marvell/libertas/main.c
@@ -216,7 +216,7 @@ int lbs_stop_iface(struct lbs_private *priv)
spin_lock_irqsave(&priv->driver_lock, flags);
priv->iface_running = false;
- kfree_skb(priv->currenttxskb);
+ dev_kfree_skb_irq(priv->currenttxskb);
priv->currenttxskb = NULL;
priv->tx_pending_len = 0;
spin_unlock_irqrestore(&priv->driver_lock, flags);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 137/885] wifi: libertas: cmdresp: dont call kfree_skb() under spin_lock_irqsave()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (135 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 136/885] wifi: libertas: main: " Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 138/885] wifi: wl3501_cs: " Greg Kroah-Hartman
` (750 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Kalle Valo, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 708a49a64237f19bd404852f297aaadbc9e7fee0 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes: f52b041aed77 ("libertas: Add spinlock to avoid race condition")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150008.111743-5-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/marvell/libertas/cmdresp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/libertas/cmdresp.c b/drivers/net/wireless/marvell/libertas/cmdresp.c
index cb515c5584c1f..74cb7551f4275 100644
--- a/drivers/net/wireless/marvell/libertas/cmdresp.c
+++ b/drivers/net/wireless/marvell/libertas/cmdresp.c
@@ -48,7 +48,7 @@ void lbs_mac_event_disconnected(struct lbs_private *priv,
/* Free Tx and Rx packets */
spin_lock_irqsave(&priv->driver_lock, flags);
- kfree_skb(priv->currenttxskb);
+ dev_kfree_skb_irq(priv->currenttxskb);
priv->currenttxskb = NULL;
priv->tx_pending_len = 0;
spin_unlock_irqrestore(&priv->driver_lock, flags);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 138/885] wifi: wl3501_cs: dont call kfree_skb() under spin_lock_irqsave()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (136 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 137/885] wifi: libertas: cmdresp: " Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 139/885] libbpf: Fix invalid return address register in s390 Greg Kroah-Hartman
` (749 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Kalle Valo, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 44bacbdf9066c590423259dbd6d520baac99c1a8 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150453.114742-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/wl3501_cs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 1b532e00a56fb..7fb2f95134760 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1328,7 +1328,7 @@ static netdev_tx_t wl3501_hard_start_xmit(struct sk_buff *skb,
} else {
++dev->stats.tx_packets;
dev->stats.tx_bytes += skb->len;
- kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
if (this->tx_buffer_cnt < 2)
netif_stop_queue(dev);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 139/885] libbpf: Fix invalid return address register in s390
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (137 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 138/885] wifi: wl3501_cs: " Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 140/885] crypto: x86/ghash - fix unaligned access in ghash_setkey() Greg Kroah-Hartman
` (748 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Daniel T. Lee, Andrii Nakryiko, Sasha Levin
From: Daniel T. Lee <danieltimlee@gmail.com>
[ Upstream commit 7244eb669397f309c3d014264823cdc9cb3f8e6b ]
There is currently an invalid register mapping in the s390 return
address register. As the manual[1] states, the return address can be
found at r14. In bpf_tracing.h, the s390 registers were named
gprs(general purpose registers). This commit fixes the problem by
correcting the mistyped mapping.
[1]: https://uclibc.org/docs/psABI-s390x.pdf#page=14
Fixes: 3cc31d794097 ("libbpf: Normalize PT_REGS_xxx() macro definitions")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221224071527.2292-7-danieltimlee@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/bpf_tracing.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/bpf/bpf_tracing.h b/tools/lib/bpf/bpf_tracing.h
index 2972dc25ff722..9c1b1689068d1 100644
--- a/tools/lib/bpf/bpf_tracing.h
+++ b/tools/lib/bpf/bpf_tracing.h
@@ -137,7 +137,7 @@ struct pt_regs___s390 {
#define __PT_PARM3_REG gprs[4]
#define __PT_PARM4_REG gprs[5]
#define __PT_PARM5_REG gprs[6]
-#define __PT_RET_REG grps[14]
+#define __PT_RET_REG gprs[14]
#define __PT_FP_REG gprs[11] /* Works only with CONFIG_FRAME_POINTER */
#define __PT_RC_REG gprs[2]
#define __PT_SP_REG gprs[15]
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 140/885] crypto: x86/ghash - fix unaligned access in ghash_setkey()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (138 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 139/885] libbpf: Fix invalid return address register in s390 Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 141/885] ACPICA: Drop port I/O validation for some regions Greg Kroah-Hartman
` (747 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Eric Biggers, Herbert Xu, Sasha Levin
From: Eric Biggers <ebiggers@google.com>
[ Upstream commit 116db2704c193fff6d73ea6c2219625f0c9bdfc8 ]
The key can be unaligned, so use the unaligned memory access helpers.
Fixes: 8ceee72808d1 ("crypto: ghash-clmulni-intel - use C implementation for setkey()")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/crypto/ghash-clmulni-intel_glue.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c
index 1f1a95f3dd0ca..c0ab0ff4af655 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -19,6 +19,7 @@
#include <crypto/internal/simd.h>
#include <asm/cpu_device_id.h>
#include <asm/simd.h>
+#include <asm/unaligned.h>
#define GHASH_BLOCK_SIZE 16
#define GHASH_DIGEST_SIZE 16
@@ -54,15 +55,14 @@ static int ghash_setkey(struct crypto_shash *tfm,
const u8 *key, unsigned int keylen)
{
struct ghash_ctx *ctx = crypto_shash_ctx(tfm);
- be128 *x = (be128 *)key;
u64 a, b;
if (keylen != GHASH_BLOCK_SIZE)
return -EINVAL;
/* perform multiplication by 'x' in GF(2^128) */
- a = be64_to_cpu(x->a);
- b = be64_to_cpu(x->b);
+ a = get_unaligned_be64(key);
+ b = get_unaligned_be64(key + 8);
ctx->shash.a = (b << 1) | (a >> 63);
ctx->shash.b = (a << 1) | (b >> 63);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 141/885] ACPICA: Drop port I/O validation for some regions
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (139 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 140/885] crypto: x86/ghash - fix unaligned access in ghash_setkey() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` Greg Kroah-Hartman
` (746 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mario Limonciello,
Rafael J. Wysocki, Sasha Levin
From: Mario Limonciello <mario.limonciello@amd.com>
[ Upstream commit e1d9148582ab2c3dada5c5cf8ca7531ca269fee5 ]
Microsoft introduced support in Windows XP for blocking port I/O
to various regions. For Windows compatibility ACPICA has adopted
the same protections and will disallow writes to those
(presumably) the same regions.
On some systems the AML included with the firmware will issue 4 byte
long writes to 0x80. These writes aren't making it over because of this
blockage. The first 4 byte write attempt is rejected, and then
subsequently 1 byte at a time each offset is tried. The first at 0x80
works, but then the next 3 bytes are rejected.
This manifests in bizarre failures for devices that expected the AML to
write all 4 bytes. Trying the same AML on Windows 10 or 11 doesn't hit
this failure and all 4 bytes are written.
Either some of these regions were wrong or some point after Windows XP
some of these regions blocks have been lifted.
In the last 15 years there doesn't seem to be any reports popping up of
this error in the Windows event viewer anymore. There is no documentation
at Microsoft's developer site indicating that Windows ACPI interpreter
blocks these regions. Between the lack of documentation and the fact that
the writes actually do work in Windows 10 and 11, it's quite likely
Windows doesn't actually enforce this anymore.
So to help the issue, only enforce Windows XP specific entries if the
latest _OSI supported is Windows XP. Continue to enforce the
ALWAYS_ILLEGAL entries.
Link: https://github.com/acpica/acpica/pull/817
Fixes: 7f0719039085 ("ACPICA: New: I/O port protection")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/acpica/hwvalid.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index 915b26448d2c9..0d392e7b0747b 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -23,8 +23,8 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width);
*
* The table is used to implement the Microsoft port access rules that
* first appeared in Windows XP. Some ports are always illegal, and some
- * ports are only illegal if the BIOS calls _OSI with a win_XP string or
- * later (meaning that the BIOS itelf is post-XP.)
+ * ports are only illegal if the BIOS calls _OSI with nothing newer than
+ * the specific _OSI strings.
*
* This provides ACPICA with the desired port protections and
* Microsoft compatibility.
@@ -145,7 +145,8 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
/* Port illegality may depend on the _OSI calls made by the BIOS */
- if (acpi_gbl_osi_data >= port_info->osi_dependency) {
+ if (port_info->osi_dependency == ACPI_ALWAYS_ILLEGAL ||
+ acpi_gbl_osi_data == port_info->osi_dependency) {
ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
"Denied AML access to port 0x%8.8X%8.8X/%X (%s 0x%.4X-0x%.4X)\n",
ACPI_FORMAT_UINT64(address),
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 142/885] genirq: Fix the return type of kstat_cpu_irqs_sum()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 002/885] HID: asus: use spinlock to safely schedule workers Greg Kroah-Hartman
` (886 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Elliott, Robert (Servers),
Zhen Lei, Tejun Heo, Peter Zijlstra (Intel),
Josh Don, Andrew Morton, Frederic Weisbecker, Paul E. McKenney,
Sasha Levin, Elliott
From: Zhen Lei <thunder.leizhen@huawei.com>
[ Upstream commit 47904aed898a08f028572b9b5a5cc101ddfb2d82 ]
The type of member ->irqs_sum is unsigned long, but kstat_cpu_irqs_sum()
returns int, which can result in truncation. Therefore, change the
kstat_cpu_irqs_sum() function's return value to unsigned long to avoid
truncation.
Fixes: f2c66cd8eedd ("/proc/stat: scalability of irq num per cpu")
Reported-by: Elliott, Robert (Servers) <elliott@hpe.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Josh Don <joshdon@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/kernel_stat.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
index ddb5a358fd829..90e2fdc17d79f 100644
--- a/include/linux/kernel_stat.h
+++ b/include/linux/kernel_stat.h
@@ -75,7 +75,7 @@ extern unsigned int kstat_irqs_usr(unsigned int irq);
/*
* Number of interrupts per cpu, since bootup
*/
-static inline unsigned int kstat_cpu_irqs_sum(unsigned int cpu)
+static inline unsigned long kstat_cpu_irqs_sum(unsigned int cpu)
{
return kstat_cpu(cpu).irqs_sum;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 142/885] genirq: Fix the return type of kstat_cpu_irqs_sum()
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
0 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Elliott, Robert (Servers),
Zhen Lei, Tejun Heo, Peter Zijlstra (Intel),
Josh Don, Andrew Morton, Frederic Weisbecker, Paul E. McKenney,
Sasha Levin, Elliott
From: Zhen Lei <thunder.leizhen@huawei.com>
[ Upstream commit 47904aed898a08f028572b9b5a5cc101ddfb2d82 ]
The type of member ->irqs_sum is unsigned long, but kstat_cpu_irqs_sum()
returns int, which can result in truncation. Therefore, change the
kstat_cpu_irqs_sum() function's return value to unsigned long to avoid
truncation.
Fixes: f2c66cd8eedd ("/proc/stat: scalability of irq num per cpu")
Reported-by: Elliott, Robert (Servers) <elliott@hpe.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Josh Don <joshdon@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/kernel_stat.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
index ddb5a358fd829..90e2fdc17d79f 100644
--- a/include/linux/kernel_stat.h
+++ b/include/linux/kernel_stat.h
@@ -75,7 +75,7 @@ extern unsigned int kstat_irqs_usr(unsigned int irq);
/*
* Number of interrupts per cpu, since bootup
*/
-static inline unsigned int kstat_cpu_irqs_sum(unsigned int cpu)
+static inline unsigned long kstat_cpu_irqs_sum(unsigned int cpu)
{
return kstat_cpu(cpu).irqs_sum;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 143/885] rcu-tasks: Improve comments explaining tasks_rcu_exit_srcu purpose
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (141 preceding siblings ...)
2023-03-07 16:51 ` Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 144/885] rcu-tasks: Remove preemption disablement around srcu_read_[un]lock() calls Greg Kroah-Hartman
` (744 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Boqun Feng, Neeraj Upadhyay,
Paul E. McKenney, Oleg Nesterov, Lai Jiangshan,
Eric W. Biederman, Frederic Weisbecker, Sasha Levin
From: Frederic Weisbecker <frederic@kernel.org>
[ Upstream commit e4e1e8089c5fd948da12cb9f4adc93821036945f ]
Make sure we don't need to look again into the depths of git blame in
order not to miss a subtle part about how rcu-tasks is dealing with
exiting tasks.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 28319d6dc5e2 ("rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/rcu/tasks.h | 37 +++++++++++++++++++++++++++++--------
1 file changed, 29 insertions(+), 8 deletions(-)
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
index f5bf6fb430dab..688c461036f57 100644
--- a/kernel/rcu/tasks.h
+++ b/kernel/rcu/tasks.h
@@ -827,11 +827,21 @@ static void rcu_tasks_pertask(struct task_struct *t, struct list_head *hop)
static void rcu_tasks_postscan(struct list_head *hop)
{
/*
- * Wait for tasks that are in the process of exiting. This
- * does only part of the job, ensuring that all tasks that were
- * previously exiting reach the point where they have disabled
- * preemption, allowing the later synchronize_rcu() to finish
- * the job.
+ * Exiting tasks may escape the tasklist scan. Those are vulnerable
+ * until their final schedule() with TASK_DEAD state. To cope with
+ * this, divide the fragile exit path part in two intersecting
+ * read side critical sections:
+ *
+ * 1) An _SRCU_ read side starting before calling exit_notify(),
+ * which may remove the task from the tasklist, and ending after
+ * the final preempt_disable() call in do_exit().
+ *
+ * 2) An _RCU_ read side starting with the final preempt_disable()
+ * call in do_exit() and ending with the final call to schedule()
+ * with TASK_DEAD state.
+ *
+ * This handles the part 1). And postgp will handle part 2) with a
+ * call to synchronize_rcu().
*/
synchronize_srcu(&tasks_rcu_exit_srcu);
}
@@ -898,7 +908,10 @@ static void rcu_tasks_postgp(struct rcu_tasks *rtp)
*
* In addition, this synchronize_rcu() waits for exiting tasks
* to complete their final preempt_disable() region of execution,
- * cleaning up after the synchronize_srcu() above.
+ * cleaning up after synchronize_srcu(&tasks_rcu_exit_srcu),
+ * enforcing the whole region before tasklist removal until
+ * the final schedule() with TASK_DEAD state to be an RCU TASKS
+ * read side critical section.
*/
synchronize_rcu();
}
@@ -988,7 +1001,11 @@ void show_rcu_tasks_classic_gp_kthread(void)
EXPORT_SYMBOL_GPL(show_rcu_tasks_classic_gp_kthread);
#endif // !defined(CONFIG_TINY_RCU)
-/* Do the srcu_read_lock() for the above synchronize_srcu(). */
+/*
+ * Contribute to protect against tasklist scan blind spot while the
+ * task is exiting and may be removed from the tasklist. See
+ * corresponding synchronize_srcu() for further details.
+ */
void exit_tasks_rcu_start(void) __acquires(&tasks_rcu_exit_srcu)
{
preempt_disable();
@@ -996,7 +1013,11 @@ void exit_tasks_rcu_start(void) __acquires(&tasks_rcu_exit_srcu)
preempt_enable();
}
-/* Do the srcu_read_unlock() for the above synchronize_srcu(). */
+/*
+ * Contribute to protect against tasklist scan blind spot while the
+ * task is exiting and may be removed from the tasklist. See
+ * corresponding synchronize_srcu() for further details.
+ */
void exit_tasks_rcu_finish(void) __releases(&tasks_rcu_exit_srcu)
{
struct task_struct *t = current;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 144/885] rcu-tasks: Remove preemption disablement around srcu_read_[un]lock() calls
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (142 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 143/885] rcu-tasks: Improve comments explaining tasks_rcu_exit_srcu purpose Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 145/885] rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes() Greg Kroah-Hartman
` (743 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Boqun Feng, Paul E. McKenney,
Neeraj Upadhyay, Lai Jiangshan, Frederic Weisbecker, Sasha Levin
From: Frederic Weisbecker <frederic@kernel.org>
[ Upstream commit 44757092958bdd749775022f915b7ac974384c2a ]
Ever since the following commit:
5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via this_cpu_dec()")
SRCU doesn't rely anymore on preemption to be disabled in order to
modify the per-CPU counter. And even then it used to be done from the API
itself.
Therefore and after checking further, it appears to be safe to remove
the preemption disablement around __srcu_read_[un]lock() in
exit_tasks_rcu_start() and exit_tasks_rcu_finish()
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 28319d6dc5e2 ("rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/rcu/tasks.h | 4 ----
1 file changed, 4 deletions(-)
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
index 688c461036f57..80e75e7926cc6 100644
--- a/kernel/rcu/tasks.h
+++ b/kernel/rcu/tasks.h
@@ -1008,9 +1008,7 @@ EXPORT_SYMBOL_GPL(show_rcu_tasks_classic_gp_kthread);
*/
void exit_tasks_rcu_start(void) __acquires(&tasks_rcu_exit_srcu)
{
- preempt_disable();
current->rcu_tasks_idx = __srcu_read_lock(&tasks_rcu_exit_srcu);
- preempt_enable();
}
/*
@@ -1022,9 +1020,7 @@ void exit_tasks_rcu_finish(void) __releases(&tasks_rcu_exit_srcu)
{
struct task_struct *t = current;
- preempt_disable();
__srcu_read_unlock(&tasks_rcu_exit_srcu, t->rcu_tasks_idx);
- preempt_enable();
exit_tasks_rcu_finish_trace(t);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 145/885] rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (143 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 144/885] rcu-tasks: Remove preemption disablement around srcu_read_[un]lock() calls Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 146/885] lib/mpi: Fix buffer overrun when SG is too long Greg Kroah-Hartman
` (742 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pengfei Xu, Boqun Feng,
Neeraj Upadhyay, Paul E. McKenney, Oleg Nesterov, Lai Jiangshan,
Eric W . Biederman, Frederic Weisbecker, Sasha Levin
From: Frederic Weisbecker <frederic@kernel.org>
[ Upstream commit 28319d6dc5e2ffefa452c2377dd0f71621b5bff0 ]
RCU Tasks and PID-namespace unshare can interact in do_exit() in a
complicated circular dependency:
1) TASK A calls unshare(CLONE_NEWPID), this creates a new PID namespace
that every subsequent child of TASK A will belong to. But TASK A
doesn't itself belong to that new PID namespace.
2) TASK A forks() and creates TASK B. TASK A stays attached to its PID
namespace (let's say PID_NS1) and TASK B is the first task belonging
to the new PID namespace created by unshare() (let's call it PID_NS2).
3) Since TASK B is the first task attached to PID_NS2, it becomes the
PID_NS2 child reaper.
4) TASK A forks() again and creates TASK C which get attached to PID_NS2.
Note how TASK C has TASK A as a parent (belonging to PID_NS1) but has
TASK B (belonging to PID_NS2) as a pid_namespace child_reaper.
5) TASK B exits and since it is the child reaper for PID_NS2, it has to
kill all other tasks attached to PID_NS2, and wait for all of them to
die before getting reaped itself (zap_pid_ns_process()).
6) TASK A calls synchronize_rcu_tasks() which leads to
synchronize_srcu(&tasks_rcu_exit_srcu).
7) TASK B is waiting for TASK C to get reaped. But TASK B is under a
tasks_rcu_exit_srcu SRCU critical section (exit_notify() is between
exit_tasks_rcu_start() and exit_tasks_rcu_finish()), blocking TASK A.
8) TASK C exits and since TASK A is its parent, it waits for it to reap
TASK C, but it can't because TASK A waits for TASK B that waits for
TASK C.
Pid_namespace semantics can hardly be changed at this point. But the
coverage of tasks_rcu_exit_srcu can be reduced instead.
The current task is assumed not to be concurrently reapable at this
stage of exit_notify() and therefore tasks_rcu_exit_srcu can be
temporarily relaxed without breaking its constraints, providing a way
out of the deadlock scenario.
[ paulmck: Fix build failure by adding additional declaration. ]
Fixes: 3f95aa81d265 ("rcu: Make TASKS_RCU handle tasks that are almost done exiting")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W . Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/rcupdate.h | 2 ++
kernel/pid_namespace.c | 17 +++++++++++++++++
kernel/rcu/tasks.h | 15 +++++++++++++--
3 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 08605ce7379d7..4a3fd3404ad0c 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -229,6 +229,7 @@ void synchronize_rcu_tasks_rude(void);
#define rcu_note_voluntary_context_switch(t) rcu_tasks_qs(t, false)
void exit_tasks_rcu_start(void);
+void exit_tasks_rcu_stop(void);
void exit_tasks_rcu_finish(void);
#else /* #ifdef CONFIG_TASKS_RCU_GENERIC */
#define rcu_tasks_classic_qs(t, preempt) do { } while (0)
@@ -237,6 +238,7 @@ void exit_tasks_rcu_finish(void);
#define call_rcu_tasks call_rcu
#define synchronize_rcu_tasks synchronize_rcu
static inline void exit_tasks_rcu_start(void) { }
+static inline void exit_tasks_rcu_stop(void) { }
static inline void exit_tasks_rcu_finish(void) { }
#endif /* #else #ifdef CONFIG_TASKS_RCU_GENERIC */
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index f4f8cb0435b45..fc21c5d5fd5de 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -244,7 +244,24 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns)
set_current_state(TASK_INTERRUPTIBLE);
if (pid_ns->pid_allocated == init_pids)
break;
+ /*
+ * Release tasks_rcu_exit_srcu to avoid following deadlock:
+ *
+ * 1) TASK A unshare(CLONE_NEWPID)
+ * 2) TASK A fork() twice -> TASK B (child reaper for new ns)
+ * and TASK C
+ * 3) TASK B exits, kills TASK C, waits for TASK A to reap it
+ * 4) TASK A calls synchronize_rcu_tasks()
+ * -> synchronize_srcu(tasks_rcu_exit_srcu)
+ * 5) *DEADLOCK*
+ *
+ * It is considered safe to release tasks_rcu_exit_srcu here
+ * because we assume the current task can not be concurrently
+ * reaped at this point.
+ */
+ exit_tasks_rcu_stop();
schedule();
+ exit_tasks_rcu_start();
}
__set_current_state(TASK_RUNNING);
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
index 80e75e7926cc6..a701001e8b321 100644
--- a/kernel/rcu/tasks.h
+++ b/kernel/rcu/tasks.h
@@ -1016,16 +1016,27 @@ void exit_tasks_rcu_start(void) __acquires(&tasks_rcu_exit_srcu)
* task is exiting and may be removed from the tasklist. See
* corresponding synchronize_srcu() for further details.
*/
-void exit_tasks_rcu_finish(void) __releases(&tasks_rcu_exit_srcu)
+void exit_tasks_rcu_stop(void) __releases(&tasks_rcu_exit_srcu)
{
struct task_struct *t = current;
__srcu_read_unlock(&tasks_rcu_exit_srcu, t->rcu_tasks_idx);
- exit_tasks_rcu_finish_trace(t);
+}
+
+/*
+ * Contribute to protect against tasklist scan blind spot while the
+ * task is exiting and may be removed from the tasklist. See
+ * corresponding synchronize_srcu() for further details.
+ */
+void exit_tasks_rcu_finish(void)
+{
+ exit_tasks_rcu_stop();
+ exit_tasks_rcu_finish_trace(current);
}
#else /* #ifdef CONFIG_TASKS_RCU */
void exit_tasks_rcu_start(void) { }
+void exit_tasks_rcu_stop(void) { }
void exit_tasks_rcu_finish(void) { exit_tasks_rcu_finish_trace(current); }
#endif /* #else #ifdef CONFIG_TASKS_RCU */
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 146/885] lib/mpi: Fix buffer overrun when SG is too long
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (144 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 145/885] rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 147/885] crypto: ccp - Avoid page allocation failure warning for SEV_GET_ID2 Greg Kroah-Hartman
` (741 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Roberto Sassu, Herbert Xu,
Eric Biggers, Sasha Levin
From: Herbert Xu <herbert@gondor.apana.org.au>
[ Upstream commit 7361d1bc307b926cbca214ab67b641123c2d6357 ]
The helper mpi_read_raw_from_sgl sets the number of entries in
the SG list according to nbytes. However, if the last entry
in the SG list contains more data than nbytes, then it may overrun
the buffer because it only allocates enough memory for nbytes.
Fixes: 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers")
Reported-by: Roberto Sassu <roberto.sassu@huaweicloud.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/mpi/mpicoder.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/lib/mpi/mpicoder.c b/lib/mpi/mpicoder.c
index 39c4c67310946..3cb6bd148fa9e 100644
--- a/lib/mpi/mpicoder.c
+++ b/lib/mpi/mpicoder.c
@@ -504,7 +504,8 @@ MPI mpi_read_raw_from_sgl(struct scatterlist *sgl, unsigned int nbytes)
while (sg_miter_next(&miter)) {
buff = miter.addr;
- len = miter.length;
+ len = min_t(unsigned, miter.length, nbytes);
+ nbytes -= len;
for (x = 0; x < len; x++) {
a <<= 8;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 147/885] crypto: ccp - Avoid page allocation failure warning for SEV_GET_ID2
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (145 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 146/885] lib/mpi: Fix buffer overrun when SG is too long Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 148/885] platform/chrome: cros_ec_typec: Update port DP VDO Greg Kroah-Hartman
` (740 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Nguyen, Peter Gonda,
Herbert Xu, David Rientjes, Tom Lendacky, Sasha Levin
From: David Rientjes <rientjes@google.com>
[ Upstream commit 91dfd98216d817ec5f1c55890bacb7b4fe9b068a ]
For SEV_GET_ID2, the user provided length does not have a specified
limitation because the length of the ID may change in the future. The
kernel memory allocation, however, is implicitly limited to 4MB on x86 by
the page allocator, otherwise the kzalloc() will fail.
When this happens, it is best not to spam the kernel log with the warning.
Simply fail the allocation and return ENOMEM to the user.
Fixes: d6112ea0cb34 ("crypto: ccp - introduce SEV_GET_ID2 command")
Reported-by: Andy Nguyen <theflow@google.com>
Reported-by: Peter Gonda <pgonda@google.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/ccp/sev-dev.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/ccp/sev-dev.c b/drivers/crypto/ccp/sev-dev.c
index 06fc7156c04f3..56998bc579d67 100644
--- a/drivers/crypto/ccp/sev-dev.c
+++ b/drivers/crypto/ccp/sev-dev.c
@@ -881,7 +881,14 @@ static int sev_ioctl_do_get_id2(struct sev_issue_cmd *argp)
input_address = (void __user *)input.address;
if (input.address && input.length) {
- id_blob = kzalloc(input.length, GFP_KERNEL);
+ /*
+ * The length of the ID shouldn't be assumed by software since
+ * it may change in the future. The allocation size is limited
+ * to 1 << (PAGE_SHIFT + MAX_ORDER - 1) by the page allocator.
+ * If the allocation fails, simply return ENOMEM rather than
+ * warning in the kernel log.
+ */
+ id_blob = kzalloc(input.length, GFP_KERNEL | __GFP_NOWARN);
if (!id_blob)
return -ENOMEM;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 148/885] platform/chrome: cros_ec_typec: Update port DP VDO
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (146 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 147/885] crypto: ccp - Avoid page allocation failure warning for SEV_GET_ID2 Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 149/885] ACPICA: nsrepair: handle cases without a return value correctly Greg Kroah-Hartman
` (739 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Prashant Malani, Benson Leung,
Heikki Krogerus, Sasha Levin
From: Prashant Malani <pmalani@chromium.org>
[ Upstream commit 8d2b28df6c3dc1581d856f52d9f78059ef2a568f ]
The port advertising DP support is a Type-C receptacle. Fix the port's
DisplayPort VDO to reflect this.
Fixes: 1903adae0464 ("platform/chrome: cros_ec_typec: Add bit offset for DP VDO")
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221228004648.793339-6-pmalani@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/chrome/cros_ec_typec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
index 59de4ce01faba..a74d01e9089e1 100644
--- a/drivers/platform/chrome/cros_ec_typec.c
+++ b/drivers/platform/chrome/cros_ec_typec.c
@@ -27,7 +27,7 @@
#define DRV_NAME "cros-ec-typec"
#define DP_PORT_VDO (DP_CONF_SET_PIN_ASSIGN(BIT(DP_PIN_ASSIGN_C) | BIT(DP_PIN_ASSIGN_D)) | \
- DP_CAP_DFP_D)
+ DP_CAP_DFP_D | DP_CAP_RECEPTACLE)
/* Supported alt modes. */
enum {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 149/885] ACPICA: nsrepair: handle cases without a return value correctly
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (147 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 148/885] platform/chrome: cros_ec_typec: Update port DP VDO Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 150/885] selftests/xsk: print correct payload for packet dump Greg Kroah-Hartman
` (738 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Daniil Tatianin, Rafael J. Wysocki,
Sasha Levin
From: Daniil Tatianin <d-tatianin@yandex-team.ru>
[ Upstream commit ca843a4c79486e99a19b859ef0b9887854afe146 ]
Previously acpi_ns_simple_repair() would crash if expected_btypes
contained any combination of ACPI_RTYPE_NONE with a different type,
e.g | ACPI_RTYPE_INTEGER because of slightly incorrect logic in the
!return_object branch, which wouldn't return AE_AML_NO_RETURN_VALUE
for such cases.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Link: https://github.com/acpica/acpica/pull/811
Fixes: 61db45ca2163 ("ACPICA: Restore code that repairs NULL package elements in return values.")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/acpica/nsrepair.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c
index 367fcd201f96e..ec512e06a48ed 100644
--- a/drivers/acpi/acpica/nsrepair.c
+++ b/drivers/acpi/acpica/nsrepair.c
@@ -181,8 +181,9 @@ acpi_ns_simple_repair(struct acpi_evaluate_info *info,
* Try to fix if there was no return object. Warning if failed to fix.
*/
if (!return_object) {
- if (expected_btypes && (!(expected_btypes & ACPI_RTYPE_NONE))) {
- if (package_index != ACPI_NOT_PACKAGE_ELEMENT) {
+ if (expected_btypes) {
+ if (!(expected_btypes & ACPI_RTYPE_NONE) &&
+ package_index != ACPI_NOT_PACKAGE_ELEMENT) {
ACPI_WARN_PREDEFINED((AE_INFO,
info->full_pathname,
ACPI_WARN_ALWAYS,
@@ -196,14 +197,15 @@ acpi_ns_simple_repair(struct acpi_evaluate_info *info,
if (ACPI_SUCCESS(status)) {
return (AE_OK); /* Repair was successful */
}
- } else {
+ }
+
+ if (expected_btypes != ACPI_RTYPE_NONE) {
ACPI_WARN_PREDEFINED((AE_INFO,
info->full_pathname,
ACPI_WARN_ALWAYS,
"Missing expected return value"));
+ return (AE_AML_NO_RETURN_VALUE);
}
-
- return (AE_AML_NO_RETURN_VALUE);
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 150/885] selftests/xsk: print correct payload for packet dump
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (148 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 149/885] ACPICA: nsrepair: handle cases without a return value correctly Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 151/885] selftests/xsk: print correct error codes when exiting Greg Kroah-Hartman
` (737 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Magnus Karlsson, Maciej Fijalkowski,
Alexei Starovoitov, Sasha Levin
From: Magnus Karlsson <magnus.karlsson@intel.com>
[ Upstream commit 2d0b2ae2871ae6d42a9f0a4280e0fb5bff8d38b8 ]
Print the correct payload when the packet dump option is selected. The
network to host conversion was forgotten and the payload was
erronously declared to be an int instead of an unsigned int.
Fixes: facb7cb2e909 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/xskxceiver.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c
index 681a5db80dae0..51e693318b3f0 100644
--- a/tools/testing/selftests/bpf/xskxceiver.c
+++ b/tools/testing/selftests/bpf/xskxceiver.c
@@ -767,7 +767,7 @@ static void pkt_dump(void *pkt, u32 len)
struct ethhdr *ethhdr;
struct udphdr *udphdr;
struct iphdr *iphdr;
- int payload, i;
+ u32 payload, i;
ethhdr = pkt;
iphdr = pkt + sizeof(*ethhdr);
@@ -792,7 +792,7 @@ static void pkt_dump(void *pkt, u32 len)
fprintf(stdout, "DEBUG>> L4: udp_hdr->src: %d\n", ntohs(udphdr->source));
fprintf(stdout, "DEBUG>> L4: udp_hdr->dst: %d\n", ntohs(udphdr->dest));
/*extract L5 frame */
- payload = *((uint32_t *)(pkt + PKT_HDR_SIZE));
+ payload = ntohl(*((u32 *)(pkt + PKT_HDR_SIZE)));
fprintf(stdout, "DEBUG>> L5: payload: %d\n", payload);
fprintf(stdout, "---------------------------------------\n");
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 151/885] selftests/xsk: print correct error codes when exiting
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (149 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 150/885] selftests/xsk: print correct payload for packet dump Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 152/885] arm64/cpufeature: Fix field sign for DIT hwcap detection Greg Kroah-Hartman
` (736 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Magnus Karlsson, Maciej Fijalkowski,
Alexei Starovoitov, Sasha Levin
From: Magnus Karlsson <magnus.karlsson@intel.com>
[ Upstream commit 085dcccfb7d3dc52ed708fc588587f319541bc83 ]
Print the correct error codes when exiting the test suite due to some
terminal error. Some of these had a switched sign and some of them
printed zero instead of errno.
Fixes: facb7cb2e909 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/xskxceiver.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c
index 51e693318b3f0..8d5d9b94b020b 100644
--- a/tools/testing/selftests/bpf/xskxceiver.c
+++ b/tools/testing/selftests/bpf/xskxceiver.c
@@ -350,7 +350,7 @@ static bool ifobj_zc_avail(struct ifobject *ifobject)
umem = calloc(1, sizeof(struct xsk_umem_info));
if (!umem) {
munmap(bufs, umem_sz);
- exit_with_error(-ENOMEM);
+ exit_with_error(ENOMEM);
}
umem->frame_size = XSK_UMEM__DEFAULT_FRAME_SIZE;
ret = xsk_configure_umem(umem, bufs, umem_sz);
@@ -936,7 +936,7 @@ static int receive_pkts(struct test_spec *test, struct pollfd *fds)
if (ifobj->use_poll) {
ret = poll(fds, 1, POLL_TMOUT);
if (ret < 0)
- exit_with_error(-ret);
+ exit_with_error(errno);
if (!ret) {
if (!is_umem_valid(test->ifobj_tx))
@@ -963,7 +963,7 @@ static int receive_pkts(struct test_spec *test, struct pollfd *fds)
if (xsk_ring_prod__needs_wakeup(&umem->fq)) {
ret = poll(fds, 1, POLL_TMOUT);
if (ret < 0)
- exit_with_error(-ret);
+ exit_with_error(errno);
}
ret = xsk_ring_prod__reserve(&umem->fq, rcvd, &idx_fq);
}
@@ -1014,7 +1014,7 @@ static int __send_pkts(struct ifobject *ifobject, u32 *pkt_nb, struct pollfd *fd
if (timeout) {
if (ret < 0) {
ksft_print_msg("ERROR: [%s] Poll error %d\n",
- __func__, ret);
+ __func__, errno);
return TEST_FAILURE;
}
if (ret == 0)
@@ -1023,7 +1023,7 @@ static int __send_pkts(struct ifobject *ifobject, u32 *pkt_nb, struct pollfd *fd
}
if (ret <= 0) {
ksft_print_msg("ERROR: [%s] Poll error %d\n",
- __func__, ret);
+ __func__, errno);
return TEST_FAILURE;
}
}
@@ -1322,18 +1322,18 @@ static void thread_common_ops(struct test_spec *test, struct ifobject *ifobject)
if (ifobject->xdp_flags & XDP_FLAGS_SKB_MODE) {
if (opts.attach_mode != XDP_ATTACHED_SKB) {
ksft_print_msg("ERROR: [%s] XDP prog not in SKB mode\n");
- exit_with_error(-EINVAL);
+ exit_with_error(EINVAL);
}
} else if (ifobject->xdp_flags & XDP_FLAGS_DRV_MODE) {
if (opts.attach_mode != XDP_ATTACHED_DRV) {
ksft_print_msg("ERROR: [%s] XDP prog not in DRV mode\n");
- exit_with_error(-EINVAL);
+ exit_with_error(EINVAL);
}
}
ret = xsk_socket__update_xskmap(ifobject->xsk->xsk, ifobject->xsk_map_fd);
if (ret)
- exit_with_error(-ret);
+ exit_with_error(errno);
}
static void *worker_testapp_validate_tx(void *arg)
@@ -1540,7 +1540,7 @@ static void swap_xsk_resources(struct ifobject *ifobj_tx, struct ifobject *ifobj
ret = xsk_socket__update_xskmap(ifobj_rx->xsk->xsk, ifobj_rx->xsk_map_fd);
if (ret)
- exit_with_error(-ret);
+ exit_with_error(errno);
}
static void testapp_bpf_res(struct test_spec *test)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 152/885] arm64/cpufeature: Fix field sign for DIT hwcap detection
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (150 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 151/885] selftests/xsk: print correct error codes when exiting Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 153/885] kselftest/arm64: Fix syscall-abi for systems without 128 bit SME Greg Kroah-Hartman
` (735 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mark Rutland, Mark Brown,
Catalin Marinas, Sasha Levin
From: Mark Brown <broonie@kernel.org>
[ Upstream commit 50daf5b7c4ec4efcaf49a4128930f872bec7dbc0 ]
Since it was added our hwcap for DIT has specified that DIT is a signed
field but this appears to be incorrect, the two values for the enumeration
are:
0b0000 NI
0b0001 IMP
which look like a normal unsigned enumeration and the in-kernel DIT usage
added by 01ab991fc0ee ("arm64: Enable data independent timing (DIT) in the
kernel") detects the feature with an unsigned enum. Fix the hwcap to specify
the field as unsigned.
Fixes: 7206dc93a58f ("arm64: Expose Arm v8.4 features")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221207-arm64-sysreg-helpers-v3-1-0d71a7b174a8@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/kernel/cpufeature.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index b3f37e2209ad3..86b2f7ec6c67e 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -2756,7 +2756,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_FP_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FPHP),
HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_AdvSIMD_SHIFT, 4, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_ASIMD),
HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_AdvSIMD_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDHP),
- HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_DIT_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DIT),
+ HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_DIT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DIT),
HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DCPOP),
HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_DCPODP),
HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_JSCVT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_JSCVT),
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 153/885] kselftest/arm64: Fix syscall-abi for systems without 128 bit SME
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (151 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 152/885] arm64/cpufeature: Fix field sign for DIT hwcap detection Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 154/885] workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex Greg Kroah-Hartman
` (734 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mark Brown, Catalin Marinas, Sasha Levin
From: Mark Brown <broonie@kernel.org>
[ Upstream commit 97ec597b26df774a257e3f8e97353fd1b4471615 ]
SME does not mandate any specific VL so we may not have 128 bit SME but
the algorithm used for enumerating VLs assumes that we will. Add the
required check to ensure that the algorithm terminates.
Fixes: 43e3f85523e4 ("kselftest/arm64: Add SME support to syscall ABI test")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-syscall-abi-sme-only-v1-1-4fabfbd62087@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/arm64/abi/syscall-abi.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/tools/testing/selftests/arm64/abi/syscall-abi.c b/tools/testing/selftests/arm64/abi/syscall-abi.c
index dd7ebe536d05f..ffe719b50c215 100644
--- a/tools/testing/selftests/arm64/abi/syscall-abi.c
+++ b/tools/testing/selftests/arm64/abi/syscall-abi.c
@@ -390,6 +390,10 @@ static void test_one_syscall(struct syscall_cfg *cfg)
sme_vl &= PR_SME_VL_LEN_MASK;
+ /* Found lowest VL */
+ if (sve_vq_from_vl(sme_vl) > sme_vq)
+ break;
+
if (sme_vq != sve_vq_from_vl(sme_vl))
sme_vq = sve_vq_from_vl(sme_vl);
@@ -461,6 +465,10 @@ int sme_count_vls(void)
vl &= PR_SME_VL_LEN_MASK;
+ /* Found lowest VL */
+ if (sve_vq_from_vl(vl) > vq)
+ break;
+
if (vq != sve_vq_from_vl(vl))
vq = sve_vq_from_vl(vl);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 154/885] workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (152 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 153/885] kselftest/arm64: Fix syscall-abi for systems without 128 bit SME Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 155/885] s390/early: fix sclp_early_sccb variable lifetime Greg Kroah-Hartman
` (733 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Valentin Schneider, Lai Jiangshan,
Tejun Heo, Sasha Levin
From: Lai Jiangshan <jiangshan.ljs@antgroup.com>
[ Upstream commit 99c621ef243bda726fb8d982a274ded96570b410 ]
When unbind_workers() reads wq_unbound_cpumask to set the affinity of
freshly-unbound kworkers, it only holds wq_pool_attach_mutex. This isn't
sufficient as wq_unbound_cpumask is only protected by wq_pool_mutex.
Make wq_unbound_cpumask protected with wq_pool_attach_mutex and also
remove the need of temporary saved_cpumask.
Fixes: 10a5a651e3af ("workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs")
Reported-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/workqueue.c | 41 ++++++++++++++++-------------------------
1 file changed, 16 insertions(+), 25 deletions(-)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 7cd5f5e7e0a1b..8e21c352c1558 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -326,7 +326,7 @@ static struct rcuwait manager_wait = __RCUWAIT_INITIALIZER(manager_wait);
static LIST_HEAD(workqueues); /* PR: list of all workqueues */
static bool workqueue_freezing; /* PL: have wqs started freezing? */
-/* PL: allowable cpus for unbound wqs and work items */
+/* PL&A: allowable cpus for unbound wqs and work items */
static cpumask_var_t wq_unbound_cpumask;
/* CPU where unbound work was last round robin scheduled from this CPU */
@@ -3952,7 +3952,8 @@ static void apply_wqattrs_cleanup(struct apply_wqattrs_ctx *ctx)
/* allocate the attrs and pwqs for later installation */
static struct apply_wqattrs_ctx *
apply_wqattrs_prepare(struct workqueue_struct *wq,
- const struct workqueue_attrs *attrs)
+ const struct workqueue_attrs *attrs,
+ const cpumask_var_t unbound_cpumask)
{
struct apply_wqattrs_ctx *ctx;
struct workqueue_attrs *new_attrs, *tmp_attrs;
@@ -3968,14 +3969,15 @@ apply_wqattrs_prepare(struct workqueue_struct *wq,
goto out_free;
/*
- * Calculate the attrs of the default pwq.
+ * Calculate the attrs of the default pwq with unbound_cpumask
+ * which is wq_unbound_cpumask or to set to wq_unbound_cpumask.
* If the user configured cpumask doesn't overlap with the
* wq_unbound_cpumask, we fallback to the wq_unbound_cpumask.
*/
copy_workqueue_attrs(new_attrs, attrs);
- cpumask_and(new_attrs->cpumask, new_attrs->cpumask, wq_unbound_cpumask);
+ cpumask_and(new_attrs->cpumask, new_attrs->cpumask, unbound_cpumask);
if (unlikely(cpumask_empty(new_attrs->cpumask)))
- cpumask_copy(new_attrs->cpumask, wq_unbound_cpumask);
+ cpumask_copy(new_attrs->cpumask, unbound_cpumask);
/*
* We may create multiple pwqs with differing cpumasks. Make a
@@ -4072,7 +4074,7 @@ static int apply_workqueue_attrs_locked(struct workqueue_struct *wq,
wq->flags &= ~__WQ_ORDERED;
}
- ctx = apply_wqattrs_prepare(wq, attrs);
+ ctx = apply_wqattrs_prepare(wq, attrs, wq_unbound_cpumask);
if (!ctx)
return -ENOMEM;
@@ -5334,7 +5336,7 @@ void thaw_workqueues(void)
}
#endif /* CONFIG_FREEZER */
-static int workqueue_apply_unbound_cpumask(void)
+static int workqueue_apply_unbound_cpumask(const cpumask_var_t unbound_cpumask)
{
LIST_HEAD(ctxs);
int ret = 0;
@@ -5350,7 +5352,7 @@ static int workqueue_apply_unbound_cpumask(void)
if (wq->flags & __WQ_ORDERED)
continue;
- ctx = apply_wqattrs_prepare(wq, wq->unbound_attrs);
+ ctx = apply_wqattrs_prepare(wq, wq->unbound_attrs, unbound_cpumask);
if (!ctx) {
ret = -ENOMEM;
break;
@@ -5365,6 +5367,11 @@ static int workqueue_apply_unbound_cpumask(void)
apply_wqattrs_cleanup(ctx);
}
+ if (!ret) {
+ mutex_lock(&wq_pool_attach_mutex);
+ cpumask_copy(wq_unbound_cpumask, unbound_cpumask);
+ mutex_unlock(&wq_pool_attach_mutex);
+ }
return ret;
}
@@ -5383,7 +5390,6 @@ static int workqueue_apply_unbound_cpumask(void)
int workqueue_set_unbound_cpumask(cpumask_var_t cpumask)
{
int ret = -EINVAL;
- cpumask_var_t saved_cpumask;
/*
* Not excluding isolated cpus on purpose.
@@ -5397,23 +5403,8 @@ int workqueue_set_unbound_cpumask(cpumask_var_t cpumask)
goto out_unlock;
}
- if (!zalloc_cpumask_var(&saved_cpumask, GFP_KERNEL)) {
- ret = -ENOMEM;
- goto out_unlock;
- }
-
- /* save the old wq_unbound_cpumask. */
- cpumask_copy(saved_cpumask, wq_unbound_cpumask);
-
- /* update wq_unbound_cpumask at first and apply it to wqs. */
- cpumask_copy(wq_unbound_cpumask, cpumask);
- ret = workqueue_apply_unbound_cpumask();
-
- /* restore the wq_unbound_cpumask when failed. */
- if (ret < 0)
- cpumask_copy(wq_unbound_cpumask, saved_cpumask);
+ ret = workqueue_apply_unbound_cpumask(cpumask);
- free_cpumask_var(saved_cpumask);
out_unlock:
apply_wqattrs_unlock();
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 155/885] s390/early: fix sclp_early_sccb variable lifetime
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (153 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 154/885] workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 156/885] s390/vfio-ap: fix an error handling path in vfio_ap_mdev_probe_queue() Greg Kroah-Hartman
` (732 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Heiko Carstens, Alexander Gordeev,
Sasha Levin
From: Alexander Gordeev <agordeev@linux.ibm.com>
[ Upstream commit 639886b71ddef085a0e7bb1f225b8ae3eda5c06f ]
Commit ada1da31ce34 ("s390/sclp: sort out physical vs
virtual pointers usage") fixed the notion of virtual
address for sclp_early_sccb pointer. However, it did
not take into account that kasan_early_init() can also
output messages and sclp_early_sccb should be adjusted
by the time kasan_early_init() is called.
Currently it is not a problem, since virtual and physical
addresses on s390 are the same. Nevertheless, should they
ever differ, this would cause an invalid pointer access.
Fixes: ada1da31ce34 ("s390/sclp: sort out physical vs virtual pointers usage")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/kernel/early.c | 1 -
arch/s390/kernel/head64.S | 1 +
drivers/s390/char/sclp_early.c | 2 +-
3 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 6030fdd6997bc..9693c8630e73f 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -288,7 +288,6 @@ static void __init sort_amode31_extable(void)
void __init startup_init(void)
{
- sclp_early_adjust_va();
reset_tod_clock();
check_image_bootable();
time_early_init();
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index d7b8b6ad574dc..3b3bf8329e6c1 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -25,6 +25,7 @@ ENTRY(startup_continue)
larl %r14,init_task
stg %r14,__LC_CURRENT
larl %r15,init_thread_union+THREAD_SIZE-STACK_FRAME_OVERHEAD-__PT_SIZE
+ brasl %r14,sclp_early_adjust_va # allow sclp_early_printk
#ifdef CONFIG_KASAN
brasl %r14,kasan_early_init
#endif
diff --git a/drivers/s390/char/sclp_early.c b/drivers/s390/char/sclp_early.c
index d15b0d541de36..140d4ee29105c 100644
--- a/drivers/s390/char/sclp_early.c
+++ b/drivers/s390/char/sclp_early.c
@@ -161,7 +161,7 @@ static void __init sclp_early_console_detect(struct init_sccb *sccb)
sclp.has_linemode = 1;
}
-void __init sclp_early_adjust_va(void)
+void __init __no_sanitize_address sclp_early_adjust_va(void)
{
sclp_early_sccb = __va((unsigned long)sclp_early_sccb);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 156/885] s390/vfio-ap: fix an error handling path in vfio_ap_mdev_probe_queue()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (154 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 155/885] s390/early: fix sclp_early_sccb variable lifetime Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 157/885] x86/signal: Fix the value returned by strict_sas_size() Greg Kroah-Hartman
` (731 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christophe JAILLET,
Alexander Gordeev, Heiko Carstens, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit 08866d34c7099e981918d34aab5d6a437436628f ]
The commit in Fixes: has switch the order of a sysfs_create_group() and a
kzalloc().
It correctly removed the now useless kfree() but forgot to add a
sysfs_remove_group() in case of (unlikely) memory allocation failure.
Add it now.
Fixes: 260f3ea14138 ("s390/vfio-ap: move probe and remove callbacks to vfio_ap_ops.c")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/d0c0a35eec4fa87cb7f3910d8ac4dc0f7dc9008a.1659283738.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/s390/crypto/vfio_ap_ops.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index 0b4cc8c597ae6..a109c59f18f78 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -1844,8 +1844,10 @@ int vfio_ap_mdev_probe_queue(struct ap_device *apdev)
return ret;
q = kzalloc(sizeof(*q), GFP_KERNEL);
- if (!q)
- return -ENOMEM;
+ if (!q) {
+ ret = -ENOMEM;
+ goto err_remove_group;
+ }
q->apqn = to_ap_queue(&apdev->device)->qid;
q->saved_isc = VFIO_AP_ISC_INVALID;
@@ -1863,6 +1865,10 @@ int vfio_ap_mdev_probe_queue(struct ap_device *apdev)
release_update_locks_for_mdev(matrix_mdev);
return 0;
+
+err_remove_group:
+ sysfs_remove_group(&apdev->device.kobj, &vfio_queue_attr_group);
+ return ret;
}
void vfio_ap_mdev_remove_queue(struct ap_device *apdev)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 157/885] x86/signal: Fix the value returned by strict_sas_size()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (155 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 156/885] s390/vfio-ap: fix an error handling path in vfio_ap_mdev_probe_queue() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 158/885] thermal/drivers/tsens: Drop msm8976-specific defines Greg Kroah-Hartman
` (730 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christophe JAILLET, Ingo Molnar,
Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit ef6dfc4b238a435ab552207ec09e4a82b6426d31 ]
Functions used with __setup() return 1 when the argument has been
successfully parsed.
Reverse the returned value so that 1 is returned when kstrtobool() is
successful (i.e. returns 0).
My understanding of these __setup() functions is that returning 1 or 0
does not change much anyway - so this is more of a cleanup than a
functional fix.
I spot it and found it spurious while looking at something else.
Even if the output is not perfect, you'll get the idea with:
$ git grep -B2 -A10 retu.*kstrtobool | grep __setup -B10
Fixes: 3aac3ebea08f ("x86/signal: Implement sigaltstack size validation")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/73882d43ebe420c9d8fb82d0560021722b243000.1673717552.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/signal.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 9c7265b524c73..82c562e2cc982 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -923,7 +923,7 @@ static bool strict_sigaltstack_size __ro_after_init = false;
static int __init strict_sas_size(char *arg)
{
- return kstrtobool(arg, &strict_sigaltstack_size);
+ return kstrtobool(arg, &strict_sigaltstack_size) == 0;
}
__setup("strict_sas_size", strict_sas_size);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 158/885] thermal/drivers/tsens: Drop msm8976-specific defines
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (156 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 157/885] x86/signal: Fix the value returned by strict_sas_size() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 159/885] thermal/drivers/tsens: Sort out msm8976 vs msm8956 data Greg Kroah-Hartman
` (729 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Konrad Dybcio, Dmitry Baryshkov, Daniel Lezcano, Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 3bf0ea99e2e32b0335106b86d84404cc85bcd113 ]
Drop msm8976-specific defines, which duplicate generic ones.
Fixes: 0e580290170d ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230101194034.831222-6-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/qcom/tsens-v1.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 573e261ccca74..13624263f1dfe 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -78,11 +78,6 @@
#define MSM8976_CAL_SEL_MASK 0x3
-#define MSM8976_CAL_DEGC_PT1 30
-#define MSM8976_CAL_DEGC_PT2 120
-#define MSM8976_SLOPE_FACTOR 1000
-#define MSM8976_SLOPE_DEFAULT 3200
-
/* eeprom layout data for qcs404/405 (v1) */
#define BASE0_MASK 0x000007f8
#define BASE1_MASK 0x0007f800
@@ -160,8 +155,8 @@ static void compute_intercept_slope_8976(struct tsens_priv *priv,
priv->sensor[10].slope = 3286;
for (i = 0; i < priv->num_sensors; i++) {
- priv->sensor[i].offset = (p1[i] * MSM8976_SLOPE_FACTOR) -
- (MSM8976_CAL_DEGC_PT1 *
+ priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
+ (CAL_DEGC_PT1 *
priv->sensor[i].slope);
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 159/885] thermal/drivers/tsens: Sort out msm8976 vs msm8956 data
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (157 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 158/885] thermal/drivers/tsens: Drop msm8976-specific defines Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 160/885] thermal/drivers/tsens: fix slope values for msm8939 Greg Kroah-Hartman
` (728 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, AngeloGioacchino Del Regno,
Konrad Dybcio, Dmitry Baryshkov, Daniel Lezcano, Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit a7d3006be5ca7b04e4b84b5ceaae55a700e511bd ]
Tsens driver mentions that msm8976 data should be used for both msm8976
and msm8956 SoCs. This is not quite correct, as according to the
vendor kernels, msm8976 should use standard slope values (3200), while
msm8956 really uses the slope values found in the driver.
Add separate compatibility string for msm8956, move slope value
overrides to the corresponding init function and use the standard
compute_intercept_slope() function for both platforms.
Fixes: 0e580290170d ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976")
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230101194034.831222-7-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/qcom/tsens-v1.c | 56 ++++++++++++++++++---------------
drivers/thermal/qcom/tsens.c | 3 ++
drivers/thermal/qcom/tsens.h | 2 +-
3 files changed, 34 insertions(+), 27 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 13624263f1dfe..faa4576fa028f 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -137,30 +137,6 @@
#define CAL_SEL_MASK 7
#define CAL_SEL_SHIFT 0
-static void compute_intercept_slope_8976(struct tsens_priv *priv,
- u32 *p1, u32 *p2, u32 mode)
-{
- int i;
-
- priv->sensor[0].slope = 3313;
- priv->sensor[1].slope = 3275;
- priv->sensor[2].slope = 3320;
- priv->sensor[3].slope = 3246;
- priv->sensor[4].slope = 3279;
- priv->sensor[5].slope = 3257;
- priv->sensor[6].slope = 3234;
- priv->sensor[7].slope = 3269;
- priv->sensor[8].slope = 3255;
- priv->sensor[9].slope = 3239;
- priv->sensor[10].slope = 3286;
-
- for (i = 0; i < priv->num_sensors; i++) {
- priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
- (CAL_DEGC_PT1 *
- priv->sensor[i].slope);
- }
-}
-
static int calibrate_v1(struct tsens_priv *priv)
{
u32 base0 = 0, base1 = 0;
@@ -286,7 +262,7 @@ static int calibrate_8976(struct tsens_priv *priv)
break;
}
- compute_intercept_slope_8976(priv, p1, p2, mode);
+ compute_intercept_slope(priv, p1, p2, mode);
kfree(qfprom_cdata);
return 0;
@@ -357,6 +333,22 @@ static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
[TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
};
+static int __init init_8956(struct tsens_priv *priv) {
+ priv->sensor[0].slope = 3313;
+ priv->sensor[1].slope = 3275;
+ priv->sensor[2].slope = 3320;
+ priv->sensor[3].slope = 3246;
+ priv->sensor[4].slope = 3279;
+ priv->sensor[5].slope = 3257;
+ priv->sensor[6].slope = 3234;
+ priv->sensor[7].slope = 3269;
+ priv->sensor[8].slope = 3255;
+ priv->sensor[9].slope = 3239;
+ priv->sensor[10].slope = 3286;
+
+ return init_common(priv);
+}
+
static const struct tsens_ops ops_generic_v1 = {
.init = init_common,
.calibrate = calibrate_v1,
@@ -369,13 +361,25 @@ struct tsens_plat_data data_tsens_v1 = {
.fields = tsens_v1_regfields,
};
+static const struct tsens_ops ops_8956 = {
+ .init = init_8956,
+ .calibrate = calibrate_8976,
+ .get_temp = get_temp_tsens_valid,
+};
+
+struct tsens_plat_data data_8956 = {
+ .num_sensors = 11,
+ .ops = &ops_8956,
+ .feat = &tsens_v1_feat,
+ .fields = tsens_v1_regfields,
+};
+
static const struct tsens_ops ops_8976 = {
.init = init_common,
.calibrate = calibrate_8976,
.get_temp = get_temp_tsens_valid,
};
-/* Valid for both MSM8956 and MSM8976. */
struct tsens_plat_data data_8976 = {
.num_sensors = 11,
.ops = &ops_8976,
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index b1b10005fb286..252c5ffdd1b66 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -968,6 +968,9 @@ static const struct of_device_id tsens_table[] = {
}, {
.compatible = "qcom,msm8939-tsens",
.data = &data_8939,
+ }, {
+ .compatible = "qcom,msm8956-tsens",
+ .data = &data_8956,
}, {
.compatible = "qcom,msm8960-tsens",
.data = &data_8960,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index ba05c82333565..4f969dd7dc47a 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -588,7 +588,7 @@ extern struct tsens_plat_data data_8960;
extern struct tsens_plat_data data_8916, data_8939, data_8974, data_9607;
/* TSENS v1 targets */
-extern struct tsens_plat_data data_tsens_v1, data_8976;
+extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
/* TSENS v2 targets */
extern struct tsens_plat_data data_8996, data_tsens_v2;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 160/885] thermal/drivers/tsens: fix slope values for msm8939
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (158 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 159/885] thermal/drivers/tsens: Sort out msm8976 vs msm8956 data Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 161/885] thermal/drivers/tsens: limit num_sensors to 9 " Greg Kroah-Hartman
` (727 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bryan ODonoghue, Shawn Guo,
Konrad Dybcio, Dmitry Baryshkov, Daniel Lezcano, Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 5aec3b035e0cbf3f042c2a03d654e5ad6748feb7 ]
According to the vendor kernels (msm-3.10, 3.14 and 3.18), msm8939
uses non-standard slope values for calibrating the sensors. Fill them
accordingly.
Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939")
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230101194034.831222-8-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/qcom/tsens-v0_1.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 327f37202c69f..f6d55e6d85dde 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -534,6 +534,21 @@ static int calibrate_9607(struct tsens_priv *priv)
return 0;
}
+static int __init init_8939(struct tsens_priv *priv) {
+ priv->sensor[0].slope = 2911;
+ priv->sensor[1].slope = 2789;
+ priv->sensor[2].slope = 2906;
+ priv->sensor[3].slope = 2763;
+ priv->sensor[4].slope = 2922;
+ priv->sensor[5].slope = 2867;
+ priv->sensor[6].slope = 2833;
+ priv->sensor[7].slope = 2838;
+ priv->sensor[8].slope = 2840;
+ priv->sensor[9].slope = 2852;
+
+ return init_common(priv);
+}
+
/* v0.1: 8916, 8939, 8974, 9607 */
static struct tsens_features tsens_v0_1_feat = {
@@ -596,7 +611,7 @@ struct tsens_plat_data data_8916 = {
};
static const struct tsens_ops ops_8939 = {
- .init = init_common,
+ .init = init_8939,
.calibrate = calibrate_8939,
.get_temp = get_temp_common,
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 161/885] thermal/drivers/tsens: limit num_sensors to 9 for msm8939
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (159 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 160/885] thermal/drivers/tsens: fix slope values for msm8939 Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 162/885] wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie() Greg Kroah-Hartman
` (726 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bryan ODonoghue, Shawn Guo,
Dmitry Baryshkov, Daniel Lezcano, Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 903238a33c116edf5f64f7a3fd246e6169cccfa6 ]
On msm8939 last (hwid=10) sensor was added in the hw revision 3.0.
Calibration data for it was placed outside of the main calibration data
blob, so it is not accessible by the current blob-parsing code.
Moreover data for the sensor's p2 is not contiguous in the fuses. This
makes it hard to use nvmem_cell API to parse calibration data in a
generic way.
Since the sensor doesn't seem to be actually used by the existing
hardware, disable the sensor for now.
Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939")
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230101194034.831222-9-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/qcom/tsens-v0_1.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index f6d55e6d85dde..8d036727b99fe 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -285,7 +285,7 @@ static int calibrate_8939(struct tsens_priv *priv)
u32 p1[10], p2[10];
int mode = 0;
u32 *qfprom_cdata;
- u32 cdata[6];
+ u32 cdata[4];
qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
if (IS_ERR(qfprom_cdata))
@@ -296,8 +296,6 @@ static int calibrate_8939(struct tsens_priv *priv)
cdata[1] = qfprom_cdata[13];
cdata[2] = qfprom_cdata[0];
cdata[3] = qfprom_cdata[1];
- cdata[4] = qfprom_cdata[22];
- cdata[5] = qfprom_cdata[21];
mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
dev_dbg(priv->dev, "calibration mode is %d\n", mode);
@@ -314,8 +312,6 @@ static int calibrate_8939(struct tsens_priv *priv)
p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
- p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
- p2[9] |= ((cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5) << 5;
for (i = 0; i < priv->num_sensors; i++)
p2[i] = (base1 + p2[i]) << 2;
fallthrough;
@@ -331,7 +327,6 @@ static int calibrate_8939(struct tsens_priv *priv)
p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT;
p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
- p1[9] = (cdata[4] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
for (i = 0; i < priv->num_sensors; i++)
p1[i] = ((base0) + p1[i]) << 2;
break;
@@ -544,7 +539,7 @@ static int __init init_8939(struct tsens_priv *priv) {
priv->sensor[6].slope = 2833;
priv->sensor[7].slope = 2838;
priv->sensor[8].slope = 2840;
- priv->sensor[9].slope = 2852;
+ /* priv->sensor[9].slope = 2852; */
return init_common(priv);
}
@@ -617,9 +612,9 @@ static const struct tsens_ops ops_8939 = {
};
struct tsens_plat_data data_8939 = {
- .num_sensors = 10,
+ .num_sensors = 9,
.ops = &ops_8939,
- .hw_ids = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, 10 },
+ .hw_ids = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, /* 10 */ },
.feat = &tsens_v0_1_feat,
.fields = tsens_v0_1_regfields,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 162/885] wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (160 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 161/885] thermal/drivers/tsens: limit num_sensors to 9 " Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 163/885] wifi: rtw89: Add missing check for alloc_workqueue Greg Kroah-Hartman
` (725 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zong-Zhe Yang, Ping-Ke Shih,
Kalle Valo, Sasha Levin
From: Zong-Zhe Yang <kevin_yang@realtek.com>
[ Upstream commit 4a0e218cc9c42d1903ade8b5a371dcf48cf918c5 ]
Do `kfree_skb(new)` before `goto out` to prevent potential leak.
Fixes: 895907779752 ("rtw89: 8852a: add ieee80211_ops::hw_scan")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103141054.17372-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtw89/fw.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtw89/fw.c b/drivers/net/wireless/realtek/rtw89/fw.c
index d57e3610fb88e..1d57a8c5e97df 100644
--- a/drivers/net/wireless/realtek/rtw89/fw.c
+++ b/drivers/net/wireless/realtek/rtw89/fw.c
@@ -2525,8 +2525,10 @@ static int rtw89_append_probe_req_ie(struct rtw89_dev *rtwdev,
list_add_tail(&info->list, &scan_info->pkt_list[band]);
ret = rtw89_fw_h2c_add_pkt_offload(rtwdev, &info->id, new);
- if (ret)
+ if (ret) {
+ kfree_skb(new);
goto out;
+ }
kfree_skb(new);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 163/885] wifi: rtw89: Add missing check for alloc_workqueue
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (161 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 162/885] wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 164/885] wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU Greg Kroah-Hartman
` (724 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Ping-Ke Shih,
Leon Romanovsky, Kalle Valo, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit ed9e6166eb0984b718facb7ca59296098cc3aa64 ]
Add check for the return value of alloc_workqueue since it may return
NULL pointer.
Moreover, add destroy_workqueue when rtw89_load_firmware fails.
Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230104142901.1611-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtw89/core.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index ad420d7ec8af9..a703bb70b8f55 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -3047,6 +3047,8 @@ int rtw89_core_init(struct rtw89_dev *rtwdev)
INIT_DELAYED_WORK(&rtwdev->cfo_track_work, rtw89_phy_cfo_track_work);
INIT_DELAYED_WORK(&rtwdev->forbid_ba_work, rtw89_forbid_ba_work);
rtwdev->txq_wq = alloc_workqueue("rtw89_tx_wq", WQ_UNBOUND | WQ_HIGHPRI, 0);
+ if (!rtwdev->txq_wq)
+ return -ENOMEM;
spin_lock_init(&rtwdev->ba_lock);
spin_lock_init(&rtwdev->rpwm_lock);
mutex_init(&rtwdev->mutex);
@@ -3070,6 +3072,7 @@ int rtw89_core_init(struct rtw89_dev *rtwdev)
ret = rtw89_load_firmware(rtwdev);
if (ret) {
rtw89_warn(rtwdev, "no firmware loaded\n");
+ destroy_workqueue(rtwdev->txq_wq);
return ret;
}
rtw89_ser_init(rtwdev);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 164/885] wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (162 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 163/885] wifi: rtw89: Add missing check for alloc_workqueue Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 165/885] wifi: orinoco: check return value of hermes_write_wordrec() Greg Kroah-Hartman
` (723 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Erhard F.,
Bitterblue Smith, Ping-Ke Shih, Kalle Valo, Sasha Levin
From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
[ Upstream commit b39f662ce1648db0b9de32e6a849b098480793cb ]
The wifi + bluetooth combo chip RTL8723BU can leak memory (especially?)
when it's connected to a bluetooth audio device. The busy bluetooth
traffic generates lots of C2H (card to host) messages, which are not
freed correctly.
To fix this, move the dev_kfree_skb() call in rtl8xxxu_c2hcmd_callback()
inside the loop where skb_dequeue() is called.
The RTL8192EU leaks memory because the C2H messages are added to the
queue and left there forever. (This was fine in the past because it
probably wasn't sending any C2H messages until commit e542e66b7c2e
("wifi: rtl8xxxu: gen2: Turn on the rate control"). Since that commit
it sends a C2H message when the TX rate changes.)
To fix this, delete the check for rf_paths > 1 and the goto. Let the
function process the C2H messages from RTL8192EU like the ones from
the other chips.
Theoretically the RTL8188FU could also leak like RTL8723BU, but it
most likely doesn't send C2H messages frequently enough.
This change was tested with RTL8723BU by Erhard F. I tested it with
RTL8188FU and RTL8192EU.
Reported-by: Erhard F. <erhard_f@mailbox.org>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215197
Fixes: e542e66b7c2e ("rtl8xxxu: add bluetooth co-existence support for single antenna")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/03b099c1-c671-d252-36f4-57b70d721f9d@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 8d91939dea8cf..a285f0dd9b9b1 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5547,9 +5547,6 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
btcoex = &priv->bt_coex;
rarpt = &priv->ra_report;
- if (priv->rf_paths > 1)
- goto out;
-
while (!skb_queue_empty(&priv->c2hcmd_queue)) {
skb = skb_dequeue(&priv->c2hcmd_queue);
@@ -5601,10 +5598,9 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
default:
break;
}
- }
-out:
- dev_kfree_skb(skb);
+ dev_kfree_skb(skb);
+ }
}
static void rtl8723bu_handle_c2h(struct rtl8xxxu_priv *priv,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 165/885] wifi: orinoco: check return value of hermes_write_wordrec()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (163 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 164/885] wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 166/885] thermal/drivers/imx_sc_thermal: Drop empty platform remove function Greg Kroah-Hartman
` (722 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexey Kodanev, Kalle Valo, Sasha Levin
From: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
[ Upstream commit 1e346cbb096a5351a637ec1992beffbf330547f0 ]
There is currently no return check for writing an authentication
type (HERMES_AUTH_SHARED_KEY or HERMES_AUTH_OPEN). It looks like
it was accidentally skipped.
This patch adds a return check similar to the other checks in
__orinoco_hw_setup_enc() for hermes_write_wordrec().
Detected using the static analysis tool - Svace.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221227133306.201356-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intersil/orinoco/hw.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/intersil/orinoco/hw.c b/drivers/net/wireless/intersil/orinoco/hw.c
index 0aea35c9c11c7..4fcca08e50de2 100644
--- a/drivers/net/wireless/intersil/orinoco/hw.c
+++ b/drivers/net/wireless/intersil/orinoco/hw.c
@@ -931,6 +931,8 @@ int __orinoco_hw_setup_enc(struct orinoco_private *priv)
err = hermes_write_wordrec(hw, USER_BAP,
HERMES_RID_CNFAUTHENTICATION_AGERE,
auth_flag);
+ if (err)
+ return err;
}
err = hermes_write_wordrec(hw, USER_BAP,
HERMES_RID_CNFWEPENABLED_AGERE,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 166/885] thermal/drivers/imx_sc_thermal: Drop empty platform remove function
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (164 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 165/885] wifi: orinoco: check return value of hermes_write_wordrec() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 167/885] thermal/drivers/imx_sc_thermal: Fix the loop condition Greg Kroah-Hartman
` (721 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Uwe Kleine-König,
Daniel Lezcano, Sasha Levin
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[ Upstream commit 5011a110295d25418f5918a6af7bfcdb00dd4e34 ]
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221212220217.3777176-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Stable-dep-of: 4b26b7c9cdef ("thermal/drivers/imx_sc_thermal: Fix the loop condition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/imx_sc_thermal.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index 5d92b70a5d53a..4df925e3a80bd 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -127,11 +127,6 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
return 0;
}
-static int imx_sc_thermal_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
static int imx_sc_sensors[] = { IMX_SC_R_SYSTEM, IMX_SC_R_PMIC_0, -1 };
static const struct of_device_id imx_sc_thermal_table[] = {
@@ -142,7 +137,6 @@ MODULE_DEVICE_TABLE(of, imx_sc_thermal_table);
static struct platform_driver imx_sc_thermal_driver = {
.probe = imx_sc_thermal_probe,
- .remove = imx_sc_thermal_remove,
.driver = {
.name = "imx-sc-thermal",
.of_match_table = imx_sc_thermal_table,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 167/885] thermal/drivers/imx_sc_thermal: Fix the loop condition
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (165 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 166/885] thermal/drivers/imx_sc_thermal: Drop empty platform remove function Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 168/885] wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function Greg Kroah-Hartman
` (720 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Viorel Suman, Dong Aisheng,
Daniel Lezcano, Sasha Levin
From: Viorel Suman <viorel.suman@nxp.com>
[ Upstream commit 4b26b7c9cdefdcb478047c30901d2379ef9e50fc ]
The minimal resource ID is 0: IMX_SC_R_AP_0=0, so fix
the loop condition. Aside of this - constify the array.
Fixes: 31fd4b9db13b ("thermal/drivers/imx_sc: Rely on the platform data to get the resource id")
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Reviewed-by: Dong Aisheng <Aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20230117091956.61729-1-viorel.suman@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/imx_sc_thermal.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index 4df925e3a80bd..dfadb03580ae1 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -88,7 +88,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
if (!resource_id)
return -EINVAL;
- for (i = 0; resource_id[i] > 0; i++) {
+ for (i = 0; resource_id[i] >= 0; i++) {
sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
if (!sensor)
@@ -127,7 +127,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
return 0;
}
-static int imx_sc_sensors[] = { IMX_SC_R_SYSTEM, IMX_SC_R_PMIC_0, -1 };
+static const int imx_sc_sensors[] = { IMX_SC_R_SYSTEM, IMX_SC_R_PMIC_0, -1 };
static const struct of_device_id imx_sc_thermal_table[] = {
{ .compatible = "fsl,imx-sc-thermal", .data = imx_sc_sensors },
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 168/885] wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (166 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 167/885] thermal/drivers/imx_sc_thermal: Fix the loop condition Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 169/885] wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails Greg Kroah-Hartman
` (719 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+e008dccab31bd3647609,
syzbot+6692c72009680f7c4eb2, Fedor Pchelkin, Alexey Khoroshilov,
Toke Høiland-Jørgensen, Kalle Valo, Sasha Levin
From: Fedor Pchelkin <pchelkin@ispras.ru>
[ Upstream commit 9b25e3985477ac3f02eca5fc1e0cc6850a3f7e69 ]
It is stated that ath9k_htc_rx_msg() either frees the provided skb or
passes its management to another callback function. However, the skb is
not freed in case there is no another callback function, and Syzkaller was
able to cause a memory leak. Also minor comment fix.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by: syzbot+e008dccab31bd3647609@syzkaller.appspotmail.com
Reported-by: syzbot+6692c72009680f7c4eb2@syzkaller.appspotmail.com
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230104123546.51427-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/htc_hst.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index ca05b07a45e67..fe62ff668f757 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -391,7 +391,7 @@ static void ath9k_htc_fw_panic_report(struct htc_target *htc_handle,
* HTC Messages are handled directly here and the obtained SKB
* is freed.
*
- * Service messages (Data, WMI) passed to the corresponding
+ * Service messages (Data, WMI) are passed to the corresponding
* endpoint RX handlers, which have to free the SKB.
*/
void ath9k_htc_rx_msg(struct htc_target *htc_handle,
@@ -478,6 +478,8 @@ void ath9k_htc_rx_msg(struct htc_target *htc_handle,
if (endpoint->ep_callbacks.rx)
endpoint->ep_callbacks.rx(endpoint->ep_callbacks.priv,
skb, epid);
+ else
+ goto invalid;
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 169/885] wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (167 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 168/885] wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 170/885] wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback() Greg Kroah-Hartman
` (718 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+e9632e3eb038d93d6bc6,
Fedor Pchelkin, Alexey Khoroshilov,
Toke Høiland-Jørgensen, Kalle Valo, Sasha Levin
From: Fedor Pchelkin <pchelkin@ispras.ru>
[ Upstream commit 0af54343a76263a12dbae7fafb64eb47c4a6ad38 ]
Syzkaller detected a memory leak of skbs in ath9k_hif_usb_rx_stream().
While processing skbs in ath9k_hif_usb_rx_stream(), the already allocated
skbs in skb_pool are not freed if ath9k_hif_usb_rx_stream() fails. If we
have an incorrect pkt_len or pkt_tag, the input skb is considered invalid
and dropped. All the associated packets already in skb_pool should be
dropped and freed. Added a comment describing this issue.
The patch also makes remain_skb NULL after being processed so that it
cannot be referenced after potential free. The initialization of hif_dev
fields which are associated with remain_skb (rx_remain_len,
rx_transfer_len and rx_pad_len) is moved after a new remain_skb is
allocated.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 6ce708f54cc8 ("ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream")
Fixes: 44b23b488d44 ("ath9k: hif_usb: Reduce indent 1 column")
Reported-by: syzbot+e9632e3eb038d93d6bc6@syzkaller.appspotmail.com
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230104123615.51511-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 31 +++++++++++++++++-------
1 file changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 1a2e0c7eeb023..de6c0824c9cab 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -561,11 +561,11 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
memcpy(ptr, skb->data, rx_remain_len);
rx_pkt_len += rx_remain_len;
- hif_dev->rx_remain_len = 0;
skb_put(remain_skb, rx_pkt_len);
skb_pool[pool_index++] = remain_skb;
-
+ hif_dev->remain_skb = NULL;
+ hif_dev->rx_remain_len = 0;
} else {
index = rx_remain_len;
}
@@ -584,16 +584,21 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
pkt_len = get_unaligned_le16(ptr + index);
pkt_tag = get_unaligned_le16(ptr + index + 2);
+ /* It is supposed that if we have an invalid pkt_tag or
+ * pkt_len then the whole input SKB is considered invalid
+ * and dropped; the associated packets already in skb_pool
+ * are dropped, too.
+ */
if (pkt_tag != ATH_USB_RX_STREAM_MODE_TAG) {
RX_STAT_INC(hif_dev, skb_dropped);
- return;
+ goto invalid_pkt;
}
if (pkt_len > 2 * MAX_RX_BUF_SIZE) {
dev_err(&hif_dev->udev->dev,
"ath9k_htc: invalid pkt_len (%x)\n", pkt_len);
RX_STAT_INC(hif_dev, skb_dropped);
- return;
+ goto invalid_pkt;
}
pad_len = 4 - (pkt_len & 0x3);
@@ -605,11 +610,6 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
if (index > MAX_RX_BUF_SIZE) {
spin_lock(&hif_dev->rx_lock);
- hif_dev->rx_remain_len = index - MAX_RX_BUF_SIZE;
- hif_dev->rx_transfer_len =
- MAX_RX_BUF_SIZE - chk_idx - 4;
- hif_dev->rx_pad_len = pad_len;
-
nskb = __dev_alloc_skb(pkt_len + 32, GFP_ATOMIC);
if (!nskb) {
dev_err(&hif_dev->udev->dev,
@@ -617,6 +617,12 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
spin_unlock(&hif_dev->rx_lock);
goto err;
}
+
+ hif_dev->rx_remain_len = index - MAX_RX_BUF_SIZE;
+ hif_dev->rx_transfer_len =
+ MAX_RX_BUF_SIZE - chk_idx - 4;
+ hif_dev->rx_pad_len = pad_len;
+
skb_reserve(nskb, 32);
RX_STAT_INC(hif_dev, skb_allocated);
@@ -654,6 +660,13 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
skb_pool[i]->len, USB_WLAN_RX_PIPE);
RX_STAT_INC(hif_dev, skb_completed);
}
+ return;
+invalid_pkt:
+ for (i = 0; i < pool_index; i++) {
+ dev_kfree_skb_any(skb_pool[i]);
+ RX_STAT_INC(hif_dev, skb_dropped);
+ }
+ return;
}
static void ath9k_hif_usb_rx_cb(struct urb *urb)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 170/885] wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (168 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 169/885] wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 171/885] wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup Greg Kroah-Hartman
` (717 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Minsuk Kang,
Toke Høiland-Jørgensen, Kalle Valo, Sasha Levin
From: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
[ Upstream commit 8a2f35b9830692f7a616f2f627f943bc748af13a ]
Fix a stack-out-of-bounds write that occurs in a WMI response callback
function that is called after a timeout occurs in ath9k_wmi_cmd().
The callback writes to wmi->cmd_rsp_buf, a stack-allocated buffer that
could no longer be valid when a timeout occurs. Set wmi->last_seq_id to
0 when a timeout occurred.
Found by a modified version of syzkaller.
BUG: KASAN: stack-out-of-bounds in ath9k_wmi_ctrl_rx
Write of size 4
Call Trace:
memcpy
ath9k_wmi_ctrl_rx
ath9k_htc_rx_msg
ath9k_hif_usb_reg_in_cb
__usb_hcd_giveback_urb
usb_hcd_giveback_urb
dummy_timer
call_timer_fn
run_timer_softirq
__do_softirq
irq_exit_rcu
sysvec_apic_timer_interrupt
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230104124130.10996-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/wmi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c
index f315c54bd3ac0..19345b8f7bfd5 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.c
+++ b/drivers/net/wireless/ath/ath9k/wmi.c
@@ -341,6 +341,7 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
if (!time_left) {
ath_dbg(common, WMI, "Timeout waiting for WMI command: %s\n",
wmi_cmd_to_name(cmd_id));
+ wmi->last_seq_id = 0;
mutex_unlock(&wmi->op_mutex);
return -ETIMEDOUT;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 171/885] wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (169 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 170/885] wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 172/885] wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data() Greg Kroah-Hartman
` (716 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miaoqian Lin, Leon Romanovsky,
Kalle Valo, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit ed3f83b3459a67a3ab9d806490ac304b567b1c2d ]
crypto_alloc_shash() allocates resources, which should be released by
crypto_free_shash(). When ath11k_peer_find() fails, there has memory
leak. Add missing crypto_free_shash() to fix this.
Fixes: 243874c64c81 ("ath11k: handle RX fragments")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230102081142.3937570-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath11k/dp_rx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index c5a4c34d77499..0c53d88293eb7 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -3126,6 +3126,7 @@ int ath11k_peer_rx_frag_setup(struct ath11k *ar, const u8 *peer_mac, int vdev_id
if (!peer) {
ath11k_warn(ab, "failed to find the peer to set up fragment info\n");
spin_unlock_bh(&ab->base_lock);
+ crypto_free_shash(tfm);
return -ENOENT;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 172/885] wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (170 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 171/885] wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 173/885] ACPI: battery: Fix missing NUL-termination with large strings Greg Kroah-Hartman
` (715 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shivani Baranwal,
Veerendranath Jakkam, Johannes Berg, Sasha Levin
From: Shivani Baranwal <quic_shivbara@quicinc.com>
[ Upstream commit df4969ca135b9b3b2c38c07514aaa775112ac835 ]
The extended KCK key length check wrongly using the KEK key attribute
for validation. Due to this GTK rekey offload is failing when the KCK
key length is 24 bytes even though the driver advertising
WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK flag. Use correct attribute to fix the
same.
Fixes: 093a48d2aa4b ("cfg80211: support bigger kek/kck key length")
Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20221206143715.1802987-2-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/wireless/nl80211.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d2321c6833985..4d4de49f7ab65 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -13808,7 +13808,7 @@ static int nl80211_set_rekey_data(struct sk_buff *skb, struct genl_info *info)
return -ERANGE;
if (nla_len(tb[NL80211_REKEY_DATA_KCK]) != NL80211_KCK_LEN &&
!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK &&
- nla_len(tb[NL80211_REKEY_DATA_KEK]) == NL80211_KCK_EXT_LEN))
+ nla_len(tb[NL80211_REKEY_DATA_KCK]) == NL80211_KCK_EXT_LEN))
return -ERANGE;
rekey_data.kek = nla_data(tb[NL80211_REKEY_DATA_KEK]);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 173/885] ACPI: battery: Fix missing NUL-termination with large strings
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (171 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 172/885] wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 174/885] selftests/bpf: Fix build errors if CONFIG_NF_CONNTRACK=m Greg Kroah-Hartman
` (714 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Armin Wolf, Rafael J. Wysocki, Sasha Levin
From: Armin Wolf <W_Armin@gmx.de>
[ Upstream commit f2ac14b5f197e4a2dec51e5ceaa56682ff1592bc ]
When encountering a string bigger than the destination buffer (32 bytes),
the string is not properly NUL-terminated, causing buffer overreads later.
This for example happens on the Inspiron 3505, where the battery
model name is larger than 32 bytes, which leads to sysfs showing
the model name together with the serial number string (which is
NUL-terminated and thus prevents worse).
Fix this by using strscpy() which ensures that the result is
always NUL-terminated.
Fixes: 106449e870b3 ("ACPI: Battery: Allow extract string from integer")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/battery.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 306513fec1e1f..084f156bdfbc4 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -440,7 +440,7 @@ static int extract_package(struct acpi_battery *battery,
if (element->type == ACPI_TYPE_STRING ||
element->type == ACPI_TYPE_BUFFER)
- strncpy(ptr, element->string.pointer, 32);
+ strscpy(ptr, element->string.pointer, 32);
else if (element->type == ACPI_TYPE_INTEGER) {
strncpy(ptr, (u8 *)&element->integer.value,
sizeof(u64));
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 174/885] selftests/bpf: Fix build errors if CONFIG_NF_CONNTRACK=m
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (172 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 173/885] ACPI: battery: Fix missing NUL-termination with large strings Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 175/885] crypto: ccp - Failure on re-initialization due to duplicate sysfs filename Greg Kroah-Hartman
` (713 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tiezhu Yang, Jiri Olsa,
Yonghong Song, Martin KaFai Lau, Sasha Levin
From: Tiezhu Yang <yangtiezhu@loongson.cn>
[ Upstream commit 92afc5329a5b23d876b215b783d200352d5aaea6 ]
If CONFIG_NF_CONNTRACK=m, there are no definitions of NF_NAT_MANIP_SRC
and NF_NAT_MANIP_DST in vmlinux.h, build test_bpf_nf.c failed.
$ make -C tools/testing/selftests/bpf/
CLNG-BPF [test_maps] test_bpf_nf.bpf.o
progs/test_bpf_nf.c:160:42: error: use of undeclared identifier 'NF_NAT_MANIP_SRC'
bpf_ct_set_nat_info(ct, &saddr, sport, NF_NAT_MANIP_SRC);
^
progs/test_bpf_nf.c:163:42: error: use of undeclared identifier 'NF_NAT_MANIP_DST'
bpf_ct_set_nat_info(ct, &daddr, dport, NF_NAT_MANIP_DST);
^
2 errors generated.
Copy the definitions in include/net/netfilter/nf_nat.h to test_bpf_nf.c,
in order to avoid redefinitions if CONFIG_NF_CONNTRACK=y, rename them with
___local suffix. This is similar with commit 1058b6a78db2 ("selftests/bpf:
Do not fail build if CONFIG_NF_CONNTRACK=m/n").
Fixes: b06b45e82b59 ("selftests/bpf: add tests for bpf_ct_set_nat_info kfunc")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/1674028604-7113-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/progs/test_bpf_nf.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/bpf/progs/test_bpf_nf.c b/tools/testing/selftests/bpf/progs/test_bpf_nf.c
index 227e85e85ddaf..9fc603c9d673e 100644
--- a/tools/testing/selftests/bpf/progs/test_bpf_nf.c
+++ b/tools/testing/selftests/bpf/progs/test_bpf_nf.c
@@ -34,6 +34,11 @@ __be16 dport = 0;
int test_exist_lookup = -ENOENT;
u32 test_exist_lookup_mark = 0;
+enum nf_nat_manip_type___local {
+ NF_NAT_MANIP_SRC___local,
+ NF_NAT_MANIP_DST___local
+};
+
struct nf_conn;
struct bpf_ct_opts___local {
@@ -58,7 +63,7 @@ int bpf_ct_change_timeout(struct nf_conn *, u32) __ksym;
int bpf_ct_set_status(struct nf_conn *, u32) __ksym;
int bpf_ct_change_status(struct nf_conn *, u32) __ksym;
int bpf_ct_set_nat_info(struct nf_conn *, union nf_inet_addr *,
- int port, enum nf_nat_manip_type) __ksym;
+ int port, enum nf_nat_manip_type___local) __ksym;
static __always_inline void
nf_ct_test(struct nf_conn *(*lookup_fn)(void *, struct bpf_sock_tuple *, u32,
@@ -157,10 +162,10 @@ nf_ct_test(struct nf_conn *(*lookup_fn)(void *, struct bpf_sock_tuple *, u32,
/* snat */
saddr.ip = bpf_get_prandom_u32();
- bpf_ct_set_nat_info(ct, &saddr, sport, NF_NAT_MANIP_SRC);
+ bpf_ct_set_nat_info(ct, &saddr, sport, NF_NAT_MANIP_SRC___local);
/* dnat */
daddr.ip = bpf_get_prandom_u32();
- bpf_ct_set_nat_info(ct, &daddr, dport, NF_NAT_MANIP_DST);
+ bpf_ct_set_nat_info(ct, &daddr, dport, NF_NAT_MANIP_DST___local);
ct_ins = bpf_ct_insert_entry(ct);
if (ct_ins) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 175/885] crypto: ccp - Failure on re-initialization due to duplicate sysfs filename
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (173 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 174/885] selftests/bpf: Fix build errors if CONFIG_NF_CONNTRACK=m Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 176/885] crypto: essiv - Handle EBUSY correctly Greg Kroah-Hartman
` (712 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vladis Dronov, Koba Ko,
Tom Lendacky, Herbert Xu, Sasha Levin
From: Koba Ko <koba.taiwan@gmail.com>
[ Upstream commit 299bf602b3f92f1456aef59c6413591fb02e762a ]
The following warning appears during the CCP module re-initialization:
[ 140.965403] sysfs: cannot create duplicate filename
'/devices/pci0000:00/0000:00:07.1/0000:03:00.2/dma/dma0chan0'
[ 140.975736] CPU: 0 PID: 388 Comm: kworker/0:2 Kdump: loaded Not
tainted 6.2.0-0.rc2.18.eln124.x86_64 #1
[ 140.985185] Hardware name: HPE ProLiant DL325 Gen10/ProLiant DL325
Gen10, BIOS A41 07/17/2020
[ 140.993761] Workqueue: events work_for_cpu_fn
[ 140.998151] Call Trace:
[ 141.000613] <TASK>
[ 141.002726] dump_stack_lvl+0x33/0x46
[ 141.006415] sysfs_warn_dup.cold+0x17/0x23
[ 141.010542] sysfs_create_dir_ns+0xba/0xd0
[ 141.014670] kobject_add_internal+0xba/0x260
[ 141.018970] kobject_add+0x81/0xb0
[ 141.022395] device_add+0xdc/0x7e0
[ 141.025822] ? complete_all+0x20/0x90
[ 141.029510] __dma_async_device_channel_register+0xc9/0x130
[ 141.035119] dma_async_device_register+0x19e/0x3b0
[ 141.039943] ccp_dmaengine_register+0x334/0x3f0 [ccp]
[ 141.045042] ccp5_init+0x662/0x6a0 [ccp]
[ 141.049000] ? devm_kmalloc+0x40/0xd0
[ 141.052688] ccp_dev_init+0xbb/0xf0 [ccp]
[ 141.056732] ? __pci_set_master+0x56/0xd0
[ 141.060768] sp_init+0x70/0x90 [ccp]
[ 141.064377] sp_pci_probe+0x186/0x1b0 [ccp]
[ 141.068596] local_pci_probe+0x41/0x80
[ 141.072374] work_for_cpu_fn+0x16/0x20
[ 141.076145] process_one_work+0x1c8/0x380
[ 141.080181] worker_thread+0x1ab/0x380
[ 141.083953] ? __pfx_worker_thread+0x10/0x10
[ 141.088250] kthread+0xda/0x100
[ 141.091413] ? __pfx_kthread+0x10/0x10
[ 141.095185] ret_from_fork+0x2c/0x50
[ 141.098788] </TASK>
[ 141.100996] kobject_add_internal failed for dma0chan0 with -EEXIST,
don't try to register things with the same name in the same directory.
[ 141.113703] ccp 0000:03:00.2: ccp initialization failed
The /dma/dma0chan0 sysfs file is not removed since dma_chan object
has been released in ccp_dma_release() before releasing dma device.
A correct procedure would be: release dma channels first => unregister
dma device => release ccp dma object.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216888
Fixes: 68dbe80f5b51 ("crypto: ccp - Release dma channels before dmaengine unrgister")
Tested-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/ccp/ccp-dmaengine.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/crypto/ccp/ccp-dmaengine.c b/drivers/crypto/ccp/ccp-dmaengine.c
index 9f753cb4f5f18..b386a7063818b 100644
--- a/drivers/crypto/ccp/ccp-dmaengine.c
+++ b/drivers/crypto/ccp/ccp-dmaengine.c
@@ -642,14 +642,26 @@ static void ccp_dma_release(struct ccp_device *ccp)
chan = ccp->ccp_dma_chan + i;
dma_chan = &chan->dma_chan;
- if (dma_chan->client_count)
- dma_release_channel(dma_chan);
-
tasklet_kill(&chan->cleanup_tasklet);
list_del_rcu(&dma_chan->device_node);
}
}
+static void ccp_dma_release_channels(struct ccp_device *ccp)
+{
+ struct ccp_dma_chan *chan;
+ struct dma_chan *dma_chan;
+ unsigned int i;
+
+ for (i = 0; i < ccp->cmd_q_count; i++) {
+ chan = ccp->ccp_dma_chan + i;
+ dma_chan = &chan->dma_chan;
+
+ if (dma_chan->client_count)
+ dma_release_channel(dma_chan);
+ }
+}
+
int ccp_dmaengine_register(struct ccp_device *ccp)
{
struct ccp_dma_chan *chan;
@@ -770,8 +782,9 @@ void ccp_dmaengine_unregister(struct ccp_device *ccp)
if (!dmaengine)
return;
- ccp_dma_release(ccp);
+ ccp_dma_release_channels(ccp);
dma_async_device_unregister(dma_dev);
+ ccp_dma_release(ccp);
kmem_cache_destroy(ccp->dma_desc_cache);
kmem_cache_destroy(ccp->dma_cmd_cache);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 176/885] crypto: essiv - Handle EBUSY correctly
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (174 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 175/885] crypto: ccp - Failure on re-initialization due to duplicate sysfs filename Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 177/885] crypto: seqiv " Greg Kroah-Hartman
` (711 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Herbert Xu, Ard Biesheuvel, Sasha Levin
From: Herbert Xu <herbert@gondor.apana.org.au>
[ Upstream commit b5a772adf45a32c68bef28e60621f12617161556 ]
As it is essiv only handles the special return value of EINPROGERSS,
which means that in all other cases it will free data related to the
request.
However, as the caller of essiv may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way. Otherwise backlogged
requests will trigger a use-after-free.
Fixes: be1eb7f78aa8 ("crypto: essiv - create wrapper template...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
crypto/essiv.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/crypto/essiv.c b/crypto/essiv.c
index e33369df90344..307eba74b901e 100644
--- a/crypto/essiv.c
+++ b/crypto/essiv.c
@@ -171,7 +171,12 @@ static void essiv_aead_done(struct crypto_async_request *areq, int err)
struct aead_request *req = areq->data;
struct essiv_aead_request_ctx *rctx = aead_request_ctx(req);
+ if (err == -EINPROGRESS)
+ goto out;
+
kfree(rctx->assoc);
+
+out:
aead_request_complete(req, err);
}
@@ -247,7 +252,7 @@ static int essiv_aead_crypt(struct aead_request *req, bool enc)
err = enc ? crypto_aead_encrypt(subreq) :
crypto_aead_decrypt(subreq);
- if (rctx->assoc && err != -EINPROGRESS)
+ if (rctx->assoc && err != -EINPROGRESS && err != -EBUSY)
kfree(rctx->assoc);
return err;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 177/885] crypto: seqiv - Handle EBUSY correctly
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (175 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 176/885] crypto: essiv - Handle EBUSY correctly Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 178/885] powercap: fix possible name leak in powercap_register_zone() Greg Kroah-Hartman
` (710 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Herbert Xu, Sasha Levin
From: Herbert Xu <herbert@gondor.apana.org.au>
[ Upstream commit 32e62025e5e52fbe4812ef044759de7010b15dbc ]
As it is seqiv only handles the special return value of EINPROGERSS,
which means that in all other cases it will free data related to the
request.
However, as the caller of seqiv may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way. Otherwise backlogged
requests will trigger a use-after-free.
Fixes: 0a270321dbf9 ("[CRYPTO] seqiv: Add Sequence Number IV Generator")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
crypto/seqiv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/crypto/seqiv.c b/crypto/seqiv.c
index 0899d527c2845..b1bcfe537daf1 100644
--- a/crypto/seqiv.c
+++ b/crypto/seqiv.c
@@ -23,7 +23,7 @@ static void seqiv_aead_encrypt_complete2(struct aead_request *req, int err)
struct aead_request *subreq = aead_request_ctx(req);
struct crypto_aead *geniv;
- if (err == -EINPROGRESS)
+ if (err == -EINPROGRESS || err == -EBUSY)
return;
if (err)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 178/885] powercap: fix possible name leak in powercap_register_zone()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (176 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 177/885] crypto: seqiv " Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 179/885] x86/microcode: Add a parameter to microcode_check() to store CPU capabilities Greg Kroah-Hartman
` (709 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Rafael J. Wysocki,
Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 1b6599f741a4525ca761ecde46e5885ff1e6ba58 ]
In the error path after calling dev_set_name(), the device
name is leaked. To fix this, calling dev_set_name() before
device_register(), and call put_device() if it returns error.
All the resources is released in powercap_release(), so it
can return from powercap_register_zone() directly.
Fixes: 75d2364ea0ca ("PowerCap: Add class driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/powercap/powercap_sys.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/powercap/powercap_sys.c b/drivers/powercap/powercap_sys.c
index f0654a932b372..ff736b006198f 100644
--- a/drivers/powercap/powercap_sys.c
+++ b/drivers/powercap/powercap_sys.c
@@ -529,9 +529,6 @@ struct powercap_zone *powercap_register_zone(
power_zone->name = kstrdup(name, GFP_KERNEL);
if (!power_zone->name)
goto err_name_alloc;
- dev_set_name(&power_zone->dev, "%s:%x",
- dev_name(power_zone->dev.parent),
- power_zone->id);
power_zone->constraints = kcalloc(nr_constraints,
sizeof(*power_zone->constraints),
GFP_KERNEL);
@@ -554,9 +551,16 @@ struct powercap_zone *powercap_register_zone(
power_zone->dev_attr_groups[0] = &power_zone->dev_zone_attr_group;
power_zone->dev_attr_groups[1] = NULL;
power_zone->dev.groups = power_zone->dev_attr_groups;
+ dev_set_name(&power_zone->dev, "%s:%x",
+ dev_name(power_zone->dev.parent),
+ power_zone->id);
result = device_register(&power_zone->dev);
- if (result)
- goto err_dev_ret;
+ if (result) {
+ put_device(&power_zone->dev);
+ mutex_unlock(&control_type->lock);
+
+ return ERR_PTR(result);
+ }
control_type->nr_zones++;
mutex_unlock(&control_type->lock);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 179/885] x86/microcode: Add a parameter to microcode_check() to store CPU capabilities
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (177 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 178/885] powercap: fix possible name leak in powercap_register_zone() Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 180/885] x86/microcode: Check CPU capabilities after late microcode update correctly Greg Kroah-Hartman
` (708 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ashok Raj, Borislav Petkov (AMD),
Sasha Levin
From: Ashok Raj <ashok.raj@intel.com>
[ Upstream commit ab31c74455c64e69342ddab21fd9426fcbfefde7 ]
Add a parameter to store CPU capabilities before performing a microcode
update so that CPU capabilities can be compared before and after update.
[ bp: Massage. ]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230109153555.4986-2-ashok.raj@intel.com
Stable-dep-of: c0dd9245aa9e ("x86/microcode: Check CPU capabilities after late microcode update correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/include/asm/processor.h | 2 +-
arch/x86/kernel/cpu/common.c | 21 +++++++++++++--------
arch/x86/kernel/cpu/microcode/core.c | 3 ++-
3 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 67c9d73b31faa..2288ef4ba17c5 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -835,7 +835,7 @@ bool xen_set_default_idle(void);
#endif
void __noreturn stop_this_cpu(void *dummy);
-void microcode_check(void);
+void microcode_check(struct cpuinfo_x86 *prev_info);
enum l1tf_mitigations {
L1TF_MITIGATION_OFF,
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index e80572b674b7a..3c08985ed70c9 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -2311,30 +2311,35 @@ void cpu_init_secondary(void)
#endif
#ifdef CONFIG_MICROCODE_LATE_LOADING
-/*
+/**
+ * microcode_check() - Check if any CPU capabilities changed after an update.
+ * @prev_info: CPU capabilities stored before an update.
+ *
* The microcode loader calls this upon late microcode load to recheck features,
* only when microcode has been updated. Caller holds microcode_mutex and CPU
* hotplug lock.
+ *
+ * Return: None
*/
-void microcode_check(void)
+void microcode_check(struct cpuinfo_x86 *prev_info)
{
- struct cpuinfo_x86 info;
-
perf_check_microcode();
/* Reload CPUID max function as it might've changed. */
- info.cpuid_level = cpuid_eax(0);
+ prev_info->cpuid_level = cpuid_eax(0);
/*
* Copy all capability leafs to pick up the synthetic ones so that
* memcmp() below doesn't fail on that. The ones coming from CPUID will
* get overwritten in get_cpu_cap().
*/
- memcpy(&info.x86_capability, &boot_cpu_data.x86_capability, sizeof(info.x86_capability));
+ memcpy(&prev_info->x86_capability, &boot_cpu_data.x86_capability,
+ sizeof(prev_info->x86_capability));
- get_cpu_cap(&info);
+ get_cpu_cap(prev_info);
- if (!memcmp(&info.x86_capability, &boot_cpu_data.x86_capability, sizeof(info.x86_capability)))
+ if (!memcmp(&prev_info->x86_capability, &boot_cpu_data.x86_capability,
+ sizeof(prev_info->x86_capability)))
return;
pr_warn("x86/CPU: CPU features have changed after loading microcode, but might not take effect.\n");
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 6a41cee242f6d..9d006ff58edc9 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -492,6 +492,7 @@ static int __reload_late(void *info)
static int microcode_reload_late(void)
{
int old = boot_cpu_data.microcode, ret;
+ struct cpuinfo_x86 prev_info;
pr_err("Attempting late microcode loading - it is dangerous and taints the kernel.\n");
pr_err("You should switch to early loading, if possible.\n");
@@ -501,7 +502,7 @@ static int microcode_reload_late(void)
ret = stop_machine_cpuslocked(__reload_late, NULL, cpu_online_mask);
if (ret == 0)
- microcode_check();
+ microcode_check(&prev_info);
pr_info("Reload completed, microcode revision: 0x%x -> 0x%x\n",
old, boot_cpu_data.microcode);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 180/885] x86/microcode: Check CPU capabilities after late microcode update correctly
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (178 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 179/885] x86/microcode: Add a parameter to microcode_check() to store CPU capabilities Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 181/885] x86/microcode: Adjust late loading result reporting message Greg Kroah-Hartman
` (707 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ashok Raj, Borislav Petkov (AMD),
Sasha Levin
From: Ashok Raj <ashok.raj@intel.com>
[ Upstream commit c0dd9245aa9e25a697181f6085692272c9ec61bc ]
The kernel caches each CPU's feature bits at boot in an x86_capability[]
structure. However, the capabilities in the BSP's copy can be turned off
as a result of certain command line parameters or configuration
restrictions, for example the SGX bit. This can cause a mismatch when
comparing the values before and after the microcode update.
Another example is X86_FEATURE_SRBDS_CTRL which gets added only after
microcode update:
# --- cpuid.before 2023-01-21 14:54:15.652000747 +0100
# +++ cpuid.after 2023-01-21 14:54:26.632001024 +0100
# @@ -10,7 +10,7 @@ CPU:
# 0x00000004 0x04: eax=0x00000000 ebx=0x00000000 ecx=0x00000000 edx=0x00000000
# 0x00000005 0x00: eax=0x00000040 ebx=0x00000040 ecx=0x00000003 edx=0x11142120
# 0x00000006 0x00: eax=0x000027f7 ebx=0x00000002 ecx=0x00000001 edx=0x00000000
# - 0x00000007 0x00: eax=0x00000000 ebx=0x029c6fbf ecx=0x40000000 edx=0xbc002400
# + 0x00000007 0x00: eax=0x00000000 ebx=0x029c6fbf ecx=0x40000000 edx=0xbc002e00
^^^
and which proves for a gazillionth time that late loading is a bad bad
idea.
microcode_check() is called after an update to report any previously
cached CPUID bits which might have changed due to the update.
Therefore, store the cached CPU caps before the update and compare them
with the CPU caps after the microcode update has succeeded.
Thus, the comparison is done between the CPUID *hardware* bits before
and after the upgrade instead of using the cached, possibly runtime
modified values in BSP's boot_cpu_data copy.
As a result, false warnings about CPUID bits changes are avoided.
[ bp:
- Massage.
- Add SRBDS_CTRL example.
- Add kernel-doc.
- Incorporate forgotten review feedback from dhansen.
]
Fixes: 1008c52c09dc ("x86/CPU: Add a microcode loader callback")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230109153555.4986-3-ashok.raj@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/include/asm/processor.h | 1 +
arch/x86/kernel/cpu/common.c | 36 ++++++++++++++++++----------
arch/x86/kernel/cpu/microcode/core.c | 6 +++++
3 files changed, 30 insertions(+), 13 deletions(-)
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 2288ef4ba17c5..d8277eec1bcd6 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -836,6 +836,7 @@ bool xen_set_default_idle(void);
void __noreturn stop_this_cpu(void *dummy);
void microcode_check(struct cpuinfo_x86 *prev_info);
+void store_cpu_caps(struct cpuinfo_x86 *info);
enum l1tf_mitigations {
L1TF_MITIGATION_OFF,
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 3c08985ed70c9..c34bdba57993a 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -2311,6 +2311,25 @@ void cpu_init_secondary(void)
#endif
#ifdef CONFIG_MICROCODE_LATE_LOADING
+/**
+ * store_cpu_caps() - Store a snapshot of CPU capabilities
+ * @curr_info: Pointer where to store it
+ *
+ * Returns: None
+ */
+void store_cpu_caps(struct cpuinfo_x86 *curr_info)
+{
+ /* Reload CPUID max function as it might've changed. */
+ curr_info->cpuid_level = cpuid_eax(0);
+
+ /* Copy all capability leafs and pick up the synthetic ones. */
+ memcpy(&curr_info->x86_capability, &boot_cpu_data.x86_capability,
+ sizeof(curr_info->x86_capability));
+
+ /* Get the hardware CPUID leafs */
+ get_cpu_cap(curr_info);
+}
+
/**
* microcode_check() - Check if any CPU capabilities changed after an update.
* @prev_info: CPU capabilities stored before an update.
@@ -2323,22 +2342,13 @@ void cpu_init_secondary(void)
*/
void microcode_check(struct cpuinfo_x86 *prev_info)
{
- perf_check_microcode();
-
- /* Reload CPUID max function as it might've changed. */
- prev_info->cpuid_level = cpuid_eax(0);
+ struct cpuinfo_x86 curr_info;
- /*
- * Copy all capability leafs to pick up the synthetic ones so that
- * memcmp() below doesn't fail on that. The ones coming from CPUID will
- * get overwritten in get_cpu_cap().
- */
- memcpy(&prev_info->x86_capability, &boot_cpu_data.x86_capability,
- sizeof(prev_info->x86_capability));
+ perf_check_microcode();
- get_cpu_cap(prev_info);
+ store_cpu_caps(&curr_info);
- if (!memcmp(&prev_info->x86_capability, &boot_cpu_data.x86_capability,
+ if (!memcmp(&prev_info->x86_capability, &curr_info.x86_capability,
sizeof(prev_info->x86_capability)))
return;
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 9d006ff58edc9..755aab64872c8 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -500,6 +500,12 @@ static int microcode_reload_late(void)
atomic_set(&late_cpus_in, 0);
atomic_set(&late_cpus_out, 0);
+ /*
+ * Take a snapshot before the microcode update in order to compare and
+ * check whether any bits changed after an update.
+ */
+ store_cpu_caps(&prev_info);
+
ret = stop_machine_cpuslocked(__reload_late, NULL, cpu_online_mask);
if (ret == 0)
microcode_check(&prev_info);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 181/885] x86/microcode: Adjust late loading result reporting message
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (179 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 180/885] x86/microcode: Check CPU capabilities after late microcode update correctly Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 182/885] selftests/bpf: Use consistent build-id type for liburandom_read.so Greg Kroah-Hartman
` (706 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Thomas Gleixner, Ashok Raj,
Borislav Petkov (AMD),
Tony Luck, Sasha Levin
From: Ashok Raj <ashok.raj@intel.com>
[ Upstream commit 6eab3abac7043226e5375e9ead0c7607ced6767b ]
During late microcode loading, the "Reload completed" message is issued
unconditionally, regardless of success or failure.
Adjust the message to report the result of the update.
[ bp: Massage. ]
Fixes: 9bd681251b7c ("x86/microcode: Announce reload operation's completion")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/lkml/874judpqqd.ffs@tglx/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/cpu/microcode/core.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 755aab64872c8..53d2d2f145ed7 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -507,11 +507,14 @@ static int microcode_reload_late(void)
store_cpu_caps(&prev_info);
ret = stop_machine_cpuslocked(__reload_late, NULL, cpu_online_mask);
- if (ret == 0)
+ if (!ret) {
+ pr_info("Reload succeeded, microcode revision: 0x%x -> 0x%x\n",
+ old, boot_cpu_data.microcode);
microcode_check(&prev_info);
-
- pr_info("Reload completed, microcode revision: 0x%x -> 0x%x\n",
- old, boot_cpu_data.microcode);
+ } else {
+ pr_info("Reload failed, current microcode revision: 0x%x\n",
+ boot_cpu_data.microcode);
+ }
return ret;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 182/885] selftests/bpf: Use consistent build-id type for liburandom_read.so
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (180 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 181/885] x86/microcode: Adjust late loading result reporting message Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 183/885] selftests/bpf: Fix vmtest static compilation error Greg Kroah-Hartman
` (705 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Artem Savkov, Andrii Nakryiko,
KP Singh, Sasha Levin
From: Artem Savkov <asavkov@redhat.com>
[ Upstream commit 61fc5e66f755db24d27ba37ce1ee4873def1a074 ]
lld produces "fast" style build-ids by default, which is inconsistent
with ld's "sha1" style. Explicitly specify build-id style to be "sha1"
when linking liburandom_read.so the same way it is already done for
urandom_read.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20221104094016.102049-1-asavkov@redhat.com
Stable-dep-of: 2514a31241e1 ("selftests/bpf: Fix vmtest static compilation error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/Makefile | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index e6cf21fad69f0..5a8fd8b3fb4a5 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -182,14 +182,15 @@ endif
$(OUTPUT)/liburandom_read.so: urandom_read_lib1.c urandom_read_lib2.c
$(call msg,LIB,,$@)
$(Q)$(CLANG) $(filter-out -static,$(CFLAGS) $(LDFLAGS)) $^ $(LDLIBS) \
- -fuse-ld=$(LLD) -Wl,-znoseparate-code -fPIC -shared -o $@
+ -fuse-ld=$(LLD) -Wl,-znoseparate-code -Wl,--build-id=sha1 \
+ -fPIC -shared -o $@
$(OUTPUT)/urandom_read: urandom_read.c urandom_read_aux.c $(OUTPUT)/liburandom_read.so
$(call msg,BINARY,,$@)
$(Q)$(CLANG) $(filter-out -static,$(CFLAGS) $(LDFLAGS)) $(filter %.c,$^) \
liburandom_read.so $(LDLIBS) \
- -fuse-ld=$(LLD) -Wl,-znoseparate-code \
- -Wl,-rpath=. -Wl,--build-id=sha1 -o $@
+ -fuse-ld=$(LLD) -Wl,-znoseparate-code -Wl,--build-id=sha1 \
+ -Wl,-rpath=. -o $@
$(OUTPUT)/sign-file: ../../../../scripts/sign-file.c
$(call msg,SIGN-FILE,,$@)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 183/885] selftests/bpf: Fix vmtest static compilation error
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (181 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 182/885] selftests/bpf: Use consistent build-id type for liburandom_read.so Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 184/885] crypto: xts - Handle EBUSY correctly Greg Kroah-Hartman
` (704 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Daniel T. Lee, Daniel Borkmann, Sasha Levin
From: Daniel T. Lee <danieltimlee@gmail.com>
[ Upstream commit 2514a31241e1e9067d379e0fbdb60e4bc2bf4659 ]
As stated in README.rst, in order to resolve errors with linker errors,
'LDLIBS=-static' should be used. Most problems will be solved by this
option, but in the case of urandom_read, this won't fix the problem. So
the Makefile is currently implemented to strip the 'static' option when
compiling the urandom_read. However, stripping this static option isn't
configured properly on $(LDLIBS) correctly, which is now causing errors
on static compilation.
# LDLIBS=-static ./vmtest.sh
ld.lld: error: attempted static link of dynamic object liburandom_read.so
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [Makefile:190: /linux/tools/testing/selftests/bpf/urandom_read] Error 1
make: *** Waiting for unfinished jobs....
This commit fixes this problem by configuring the strip with $(LDLIBS).
Fixes: 68084a136420 ("selftests/bpf: Fix building bpf selftests statically")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230125100440.21734-1-danieltimlee@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/Makefile | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 5a8fd8b3fb4a5..1fda7448f4a2f 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -181,14 +181,15 @@ endif
# do not fail. Static builds leave urandom_read relying on system-wide shared libraries.
$(OUTPUT)/liburandom_read.so: urandom_read_lib1.c urandom_read_lib2.c
$(call msg,LIB,,$@)
- $(Q)$(CLANG) $(filter-out -static,$(CFLAGS) $(LDFLAGS)) $^ $(LDLIBS) \
+ $(Q)$(CLANG) $(filter-out -static,$(CFLAGS) $(LDFLAGS)) \
+ $^ $(filter-out -static,$(LDLIBS)) \
-fuse-ld=$(LLD) -Wl,-znoseparate-code -Wl,--build-id=sha1 \
-fPIC -shared -o $@
$(OUTPUT)/urandom_read: urandom_read.c urandom_read_aux.c $(OUTPUT)/liburandom_read.so
$(call msg,BINARY,,$@)
$(Q)$(CLANG) $(filter-out -static,$(CFLAGS) $(LDFLAGS)) $(filter %.c,$^) \
- liburandom_read.so $(LDLIBS) \
+ liburandom_read.so $(filter-out -static,$(LDLIBS)) \
-fuse-ld=$(LLD) -Wl,-znoseparate-code -Wl,--build-id=sha1 \
-Wl,-rpath=. -o $@
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 184/885] crypto: xts - Handle EBUSY correctly
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (182 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 183/885] selftests/bpf: Fix vmtest static compilation error Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 185/885] leds: led-class: Add missing put_device() to led_put() Greg Kroah-Hartman
` (703 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Herbert Xu, Ard Biesheuvel, Sasha Levin
From: Herbert Xu <herbert@gondor.apana.org.au>
[ Upstream commit 51c082514c2dedf2711c99d93c196cc4eedceb40 ]
As it is xts only handles the special return value of EINPROGRESS,
which means that in all other cases it will free data related to the
request.
However, as the caller of xts may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way. Otherwise backlogged
requests will trigger a use-after-free.
Fixes: 8083b1bf8163 ("crypto: xts - add support for ciphertext stealing")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
crypto/xts.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/crypto/xts.c b/crypto/xts.c
index 63c85b9e64e08..de6cbcf69bbd6 100644
--- a/crypto/xts.c
+++ b/crypto/xts.c
@@ -203,12 +203,12 @@ static void xts_encrypt_done(struct crypto_async_request *areq, int err)
if (!err) {
struct xts_request_ctx *rctx = skcipher_request_ctx(req);
- rctx->subreq.base.flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+ rctx->subreq.base.flags &= CRYPTO_TFM_REQ_MAY_BACKLOG;
err = xts_xor_tweak_post(req, true);
if (!err && unlikely(req->cryptlen % XTS_BLOCK_SIZE)) {
err = xts_cts_final(req, crypto_skcipher_encrypt);
- if (err == -EINPROGRESS)
+ if (err == -EINPROGRESS || err == -EBUSY)
return;
}
}
@@ -223,12 +223,12 @@ static void xts_decrypt_done(struct crypto_async_request *areq, int err)
if (!err) {
struct xts_request_ctx *rctx = skcipher_request_ctx(req);
- rctx->subreq.base.flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+ rctx->subreq.base.flags &= CRYPTO_TFM_REQ_MAY_BACKLOG;
err = xts_xor_tweak_post(req, false);
if (!err && unlikely(req->cryptlen % XTS_BLOCK_SIZE)) {
err = xts_cts_final(req, crypto_skcipher_decrypt);
- if (err == -EINPROGRESS)
+ if (err == -EINPROGRESS || err == -EBUSY)
return;
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 185/885] leds: led-class: Add missing put_device() to led_put()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (183 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 184/885] crypto: xts - Handle EBUSY correctly Greg Kroah-Hartman
@ 2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 186/885] s390/bpf: Add expoline to tail calls Greg Kroah-Hartman
` (702 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:51 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko, Linus Walleij,
Hans de Goede, Lee Jones, Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit 445110941eb94709216363f9d807d2508e64abd7 ]
led_put() is used to "undo" a successful of_led_get() call,
of_led_get() uses class_find_device_by_of_node() which returns
a reference to the device which must be free-ed with put_device()
when the caller is done with it.
Add a put_device() call to led_put() to free the reference returned
by class_find_device_by_of_node().
And also add a put_device() in the error-exit case of try_module_get()
failing.
Fixes: 699a8c7c4bd3 ("leds: Add of_led_get() and led_put()")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230120114524.408368-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/leds/led-class.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 6a8ea94834fa3..7391d2cf1370a 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -241,8 +241,10 @@ struct led_classdev *of_led_get(struct device_node *np, int index)
led_cdev = dev_get_drvdata(led_dev);
- if (!try_module_get(led_cdev->dev->parent->driver->owner))
+ if (!try_module_get(led_cdev->dev->parent->driver->owner)) {
+ put_device(led_cdev->dev);
return ERR_PTR(-ENODEV);
+ }
return led_cdev;
}
@@ -255,6 +257,7 @@ EXPORT_SYMBOL_GPL(of_led_get);
void led_put(struct led_classdev *led_cdev)
{
module_put(led_cdev->dev->parent->driver->owner);
+ put_device(led_cdev->dev);
}
EXPORT_SYMBOL_GPL(led_put);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 186/885] s390/bpf: Add expoline to tail calls
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (184 preceding siblings ...)
2023-03-07 16:51 ` [PATCH 6.1 185/885] leds: led-class: Add missing put_device() to led_put() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 187/885] wifi: iwlwifi: mei: fix compilation errors in rfkill() Greg Kroah-Hartman
` (701 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ilya Leoshkevich,
Alexei Starovoitov, Sasha Levin
From: Ilya Leoshkevich <iii@linux.ibm.com>
[ Upstream commit bb4ef8fc3d193ed8d5583fb47cbeff5d8fb8302f ]
All the indirect jumps in the eBPF JIT already use expolines, except
for the tail call one.
Fixes: de5cb6eb514e ("s390: use expoline thunks in the BPF JIT")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/net/bpf_jit_comp.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index af35052d06ed6..fbdba4c306bea 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -1393,8 +1393,16 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
/* lg %r1,bpf_func(%r1) */
EMIT6_DISP_LH(0xe3000000, 0x0004, REG_1, REG_1, REG_0,
offsetof(struct bpf_prog, bpf_func));
- /* bc 0xf,tail_call_start(%r1) */
- _EMIT4(0x47f01000 + jit->tail_call_start);
+ if (nospec_uses_trampoline()) {
+ jit->seen |= SEEN_FUNC;
+ /* aghi %r1,tail_call_start */
+ EMIT4_IMM(0xa70b0000, REG_1, jit->tail_call_start);
+ /* brcl 0xf,__s390_indirect_jump_r1 */
+ EMIT6_PCREL_RILC(0xc0040000, 0xf, jit->r1_thunk_ip);
+ } else {
+ /* bc 0xf,tail_call_start(%r1) */
+ _EMIT4(0x47f01000 + jit->tail_call_start);
+ }
/* out: */
if (jit->prg_buf) {
*(u16 *)(jit->prg_buf + patch_1_clrj + 2) =
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 187/885] wifi: iwlwifi: mei: fix compilation errors in rfkill()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (185 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 186/885] s390/bpf: Add expoline to tail calls Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 188/885] kselftest/arm64: Fix enumeration of systems without 128 bit SME Greg Kroah-Hartman
` (700 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Gregory Greenman, Sasha Levin
From: Gregory Greenman <gregory.greenman@intel.com>
[ Upstream commit 9cbd5a8abca904441e36861e3a92961bec41d13f ]
The rfkill() callback was invoked with wrong parameters.
It was missed since MEI is defined now as depending on BROKEN.
Fix that.
Fixes: d288067ede4b ("wifi: iwlwifi: mei: avoid blocking sap messages handling due to rtnl lock")
Fixes: 5aa7ce31bd84 ("wifi: iwlwifi: mei: make sure ownership confirmed message is sent")
Fixes: 95170a46b7dd ("wifi: iwlwifi: mei: don't send SAP commands if AMT is disabled")
Link: https://lore.kernel.org/r/20230126222821.305122-2-gregory.greenman@intel.com
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlwifi/mei/main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mei/main.c b/drivers/net/wireless/intel/iwlwifi/mei/main.c
index c0142093c7682..27eb28290e234 100644
--- a/drivers/net/wireless/intel/iwlwifi/mei/main.c
+++ b/drivers/net/wireless/intel/iwlwifi/mei/main.c
@@ -784,7 +784,7 @@ static void iwl_mei_handle_amt_state(struct mei_cl_device *cldev,
if (mei->amt_enabled)
iwl_mei_set_init_conf(mei);
else if (iwl_mei_cache.ops)
- iwl_mei_cache.ops->rfkill(iwl_mei_cache.priv, false, false);
+ iwl_mei_cache.ops->rfkill(iwl_mei_cache.priv, false);
schedule_work(&mei->netdev_work);
@@ -825,7 +825,7 @@ static void iwl_mei_handle_csme_taking_ownership(struct mei_cl_device *cldev,
*/
mei->csme_taking_ownership = true;
- iwl_mei_cache.ops->rfkill(iwl_mei_cache.priv, true, true);
+ iwl_mei_cache.ops->rfkill(iwl_mei_cache.priv, true);
} else {
iwl_mei_send_sap_msg(cldev,
SAP_MSG_NOTIF_CSME_OWNERSHIP_CONFIRMED);
@@ -1695,7 +1695,7 @@ int iwl_mei_register(void *priv, const struct iwl_mei_ops *ops)
if (mei->amt_enabled)
iwl_mei_send_sap_msg(mei->cldev,
SAP_MSG_NOTIF_WIFIDR_UP);
- ops->rfkill(priv, mei->link_prot_state, false);
+ ops->rfkill(priv, mei->link_prot_state);
}
}
ret = 0;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 188/885] kselftest/arm64: Fix enumeration of systems without 128 bit SME
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (186 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 187/885] wifi: iwlwifi: mei: fix compilation errors in rfkill() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 189/885] can: rcar_canfd: Fix R-Car V3U GAFLCFG field accesses Greg Kroah-Hartman
` (699 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mark Brown, Catalin Marinas, Sasha Levin
From: Mark Brown <broonie@kernel.org>
[ Upstream commit 5f389238534ac8ca4ee3ab12eeb89d3984d303a1 ]
The current signal handling tests for SME do not account for the fact that
unlike SVE all SME vector lengths are optional so we can't guarantee that
we will encounter the minimum possible VL, they will hang enumerating VLs
on such systems. Abort enumeration when we find the lowest VL.
Fixes: 4963aeb35a9e ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230131-arm64-kselftest-sig-sme-no-128-v1-1-d47c13dc8e1e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/arm64/signal/testcases/ssve_regs.c | 4 ++++
tools/testing/selftests/arm64/signal/testcases/za_regs.c | 4 ++++
2 files changed, 8 insertions(+)
diff --git a/tools/testing/selftests/arm64/signal/testcases/ssve_regs.c b/tools/testing/selftests/arm64/signal/testcases/ssve_regs.c
index d0a178945b1a8..c6b17c47cac4c 100644
--- a/tools/testing/selftests/arm64/signal/testcases/ssve_regs.c
+++ b/tools/testing/selftests/arm64/signal/testcases/ssve_regs.c
@@ -34,6 +34,10 @@ static bool sme_get_vls(struct tdescr *td)
vl &= PR_SME_VL_LEN_MASK;
+ /* Did we find the lowest supported VL? */
+ if (vq < sve_vq_from_vl(vl))
+ break;
+
/* Skip missing VLs */
vq = sve_vq_from_vl(vl);
diff --git a/tools/testing/selftests/arm64/signal/testcases/za_regs.c b/tools/testing/selftests/arm64/signal/testcases/za_regs.c
index ea45acb115d5b..174ad66566964 100644
--- a/tools/testing/selftests/arm64/signal/testcases/za_regs.c
+++ b/tools/testing/selftests/arm64/signal/testcases/za_regs.c
@@ -34,6 +34,10 @@ static bool sme_get_vls(struct tdescr *td)
vl &= PR_SME_VL_LEN_MASK;
+ /* Did we find the lowest supported VL? */
+ if (vq < sve_vq_from_vl(vl))
+ break;
+
/* Skip missing VLs */
vq = sve_vq_from_vl(vl);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 189/885] can: rcar_canfd: Fix R-Car V3U GAFLCFG field accesses
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (187 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 188/885] kselftest/arm64: Fix enumeration of systems without 128 bit SME Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 190/885] selftests/bpf: Initialize tc in xdp_synproxy Greg Kroah-Hartman
` (698 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Geert Uytterhoeven,
Marc Kleine-Budde, Sasha Levin
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit 9be8c5583581244d8a77e41afa16b8b0a5ddabc0 ]
Each Global Acceptance Filter List Configuration Register (GAFLCFG)
contains two fields, and stores the number of channel rules for one
channel pair.
As R-Car V3U and later can have more than 2 channels, the field
selection should be based on the LSB (even or odd) of the channel
number, instead of on the full channel number.
Fixes: 45721c406dcf50d4 ("can: rcar_canfd: Add support for r8a779a0 SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/36bcf0ffb96d6aaed970751f9546b901af638bcf.1674499048.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/rcar/rcar_canfd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index b306cf554634f..e68291697c33f 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -98,10 +98,10 @@ enum rcanfd_chip_id {
/* RSCFDnCFDGAFLCFG0 / RSCFDnGAFLCFG0 */
#define RCANFD_GAFLCFG_SETRNC(gpriv, n, x) \
(((x) & reg_v3u(gpriv, 0x1ff, 0xff)) << \
- (reg_v3u(gpriv, 16, 24) - (n) * reg_v3u(gpriv, 16, 8)))
+ (reg_v3u(gpriv, 16, 24) - ((n) & 1) * reg_v3u(gpriv, 16, 8)))
#define RCANFD_GAFLCFG_GETRNC(gpriv, n, x) \
- (((x) >> (reg_v3u(gpriv, 16, 24) - (n) * reg_v3u(gpriv, 16, 8))) & \
+ (((x) >> (reg_v3u(gpriv, 16, 24) - ((n) & 1) * reg_v3u(gpriv, 16, 8))) & \
reg_v3u(gpriv, 0x1ff, 0xff))
/* RSCFDnCFDGAFLECTR / RSCFDnGAFLECTR */
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 190/885] selftests/bpf: Initialize tc in xdp_synproxy
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (188 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 189/885] can: rcar_canfd: Fix R-Car V3U GAFLCFG field accesses Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 191/885] crypto: ccp - Flush the SEV-ES TMR memory before giving it to firmware Greg Kroah-Hartman
` (697 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexei Starovoitov, Joanne Koong,
Ilya Leoshkevich, Sasha Levin
From: Ilya Leoshkevich <iii@linux.ibm.com>
[ Upstream commit 354bb4a0e0b6be8f55bacbe7f08c94b4741f5658 ]
xdp_synproxy/xdp fails in CI with:
Error: bpf_tc_hook_create: File exists
The XDP version of the test should not be calling bpf_tc_hook_create();
the reason it's happening anyway is that if we don't specify --tc on the
command line, tc variable remains uninitialized.
Fixes: 784d5dc0efc2 ("selftests/bpf: Add selftests for raw syncookie helpers in TC mode")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230202235335.3403781-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/xdp_synproxy.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/bpf/xdp_synproxy.c b/tools/testing/selftests/bpf/xdp_synproxy.c
index 410a1385a01dd..6dbe0b7451985 100644
--- a/tools/testing/selftests/bpf/xdp_synproxy.c
+++ b/tools/testing/selftests/bpf/xdp_synproxy.c
@@ -116,6 +116,7 @@ static void parse_options(int argc, char *argv[], unsigned int *ifindex, __u32 *
*tcpipopts = 0;
*ports = NULL;
*single = false;
+ *tc = false;
while (true) {
int opt;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 191/885] crypto: ccp - Flush the SEV-ES TMR memory before giving it to firmware
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (189 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 190/885] selftests/bpf: Initialize tc in xdp_synproxy Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 192/885] bpftool: profile online CPUs instead of possible Greg Kroah-Hartman
` (696 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Tom Lendacky, Herbert Xu, Sasha Levin
From: Tom Lendacky <thomas.lendacky@amd.com>
[ Upstream commit 46a334a98f585ef78d51d8f5736596887bdd7f54 ]
Perform a cache flush on the SEV-ES TMR memory after allocation to prevent
any possibility of the firmware encountering an error should dirty cache
lines be present. Use clflush_cache_range() to flush the SEV-ES TMR memory.
Fixes: 97f9ac3db661 ("crypto: ccp - Add support for SEV-ES to the PSP driver")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/ccp/sev-dev.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/ccp/sev-dev.c b/drivers/crypto/ccp/sev-dev.c
index 56998bc579d67..3e583f0324874 100644
--- a/drivers/crypto/ccp/sev-dev.c
+++ b/drivers/crypto/ccp/sev-dev.c
@@ -26,6 +26,7 @@
#include <linux/fs_struct.h>
#include <asm/smp.h>
+#include <asm/cacheflush.h>
#include "psp-dev.h"
#include "sev-dev.h"
@@ -1334,7 +1335,10 @@ void sev_pci_init(void)
/* Obtain the TMR memory area for SEV-ES use */
sev_es_tmr = sev_fw_alloc(SEV_ES_TMR_SIZE);
- if (!sev_es_tmr)
+ if (sev_es_tmr)
+ /* Must flush the cache before giving it to the firmware */
+ clflush_cache_range(sev_es_tmr, SEV_ES_TMR_SIZE);
+ else
dev_warn(sev->dev,
"SEV: TMR allocation failed, SEV-ES support unavailable\n");
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 192/885] bpftool: profile online CPUs instead of possible
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (190 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 191/885] crypto: ccp - Flush the SEV-ES TMR memory before giving it to firmware Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 193/885] wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work Greg Kroah-Hartman
` (695 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tonghao Zhang, Quentin Monnet,
Alexei Starovoitov, Daniel Borkmann, Andrii Nakryiko,
Martin KaFai Lau, Song Liu, Yonghong Song, John Fastabend,
KP Singh, Stanislav Fomichev, Hao Luo, Jiri Olsa,
Martin KaFai Lau, Sasha Levin
From: Tonghao Zhang <tong@infragraf.org>
[ Upstream commit 377c16fa3f3c60d21e4b05314c8be034ce37f2eb ]
The number of online cpu may be not equal to possible cpu.
"bpftool prog profile" can not create pmu event on possible
but on online cpu.
$ dmidecode -s system-product-name
PowerEdge R620
$ cat /sys/devices/system/cpu/possible
0-47
$ cat /sys/devices/system/cpu/online
0-31
Disable cpu dynamically:
$ echo 0 > /sys/devices/system/cpu/cpuX/online
If one cpu is offline, perf_event_open will return ENODEV.
To fix this issue:
* check value returned and skip offline cpu.
* close pmu_fd immediately on error path, avoid fd leaking.
Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Signed-off-by: Tonghao Zhang <tong@infragraf.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230202131701.29519-1-tong@infragraf.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/bpf/bpftool/prog.c | 38 ++++++++++++++++++++++++++++++--------
1 file changed, 30 insertions(+), 8 deletions(-)
diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index c81362a001ba9..41c02b6f6f043 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -2166,10 +2166,38 @@ static void profile_close_perf_events(struct profiler_bpf *obj)
profile_perf_event_cnt = 0;
}
+static int profile_open_perf_event(int mid, int cpu, int map_fd)
+{
+ int pmu_fd;
+
+ pmu_fd = syscall(__NR_perf_event_open, &metrics[mid].attr,
+ -1 /*pid*/, cpu, -1 /*group_fd*/, 0);
+ if (pmu_fd < 0) {
+ if (errno == ENODEV) {
+ p_info("cpu %d may be offline, skip %s profiling.",
+ cpu, metrics[mid].name);
+ profile_perf_event_cnt++;
+ return 0;
+ }
+ return -1;
+ }
+
+ if (bpf_map_update_elem(map_fd,
+ &profile_perf_event_cnt,
+ &pmu_fd, BPF_ANY) ||
+ ioctl(pmu_fd, PERF_EVENT_IOC_ENABLE, 0)) {
+ close(pmu_fd);
+ return -1;
+ }
+
+ profile_perf_events[profile_perf_event_cnt++] = pmu_fd;
+ return 0;
+}
+
static int profile_open_perf_events(struct profiler_bpf *obj)
{
unsigned int cpu, m;
- int map_fd, pmu_fd;
+ int map_fd;
profile_perf_events = calloc(
sizeof(int), obj->rodata->num_cpu * obj->rodata->num_metric);
@@ -2188,17 +2216,11 @@ static int profile_open_perf_events(struct profiler_bpf *obj)
if (!metrics[m].selected)
continue;
for (cpu = 0; cpu < obj->rodata->num_cpu; cpu++) {
- pmu_fd = syscall(__NR_perf_event_open, &metrics[m].attr,
- -1/*pid*/, cpu, -1/*group_fd*/, 0);
- if (pmu_fd < 0 ||
- bpf_map_update_elem(map_fd, &profile_perf_event_cnt,
- &pmu_fd, BPF_ANY) ||
- ioctl(pmu_fd, PERF_EVENT_IOC_ENABLE, 0)) {
+ if (profile_open_perf_event(m, cpu, map_fd)) {
p_err("failed to create event %s on cpu %d",
metrics[m].name, cpu);
return -1;
}
- profile_perf_events[profile_perf_event_cnt++] = pmu_fd;
}
}
return 0;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 193/885] wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (191 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 192/885] bpftool: profile online CPUs instead of possible Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 194/885] wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit Greg Kroah-Hartman
` (694 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ryder Lee, Howard Hsu,
Felix Fietkau, Sasha Levin
From: Howard Hsu <howard-yh.hsu@mediatek.com>
[ Upstream commit 7d12b38ab6f6b77198cd3a66db19587bbdd3308c ]
Enable thermal management by default shall not be executed during mcu
init. This causes thermal configuration being reset to the firmware
default settings.
Fixes: 0063b86c9120 ("mt76: mt7915e: Enable thermal management by default")
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7915/init.c | 3 +--
drivers/net/wireless/mediatek/mt76/mt7915/main.c | 6 ++++++
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index cc2aac86bcfb6..38e94187d5eda 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -200,8 +200,7 @@ static int mt7915_thermal_init(struct mt7915_phy *phy)
phy->throttle_temp[0] = 110;
phy->throttle_temp[1] = 120;
- return mt7915_mcu_set_thermal_throttling(phy,
- MT7915_THERMAL_THROTTLE_MAX);
+ return 0;
}
static void mt7915_led_set_config(struct led_classdev *led_cdev,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index 89b519cfd14c3..060cb88e82e30 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -57,6 +57,12 @@ static int mt7915_start(struct ieee80211_hw *hw)
mt7915_mac_enable_nf(dev, 1);
}
+ ret = mt7915_mcu_set_thermal_throttling(phy,
+ MT7915_THERMAL_THROTTLE_MAX);
+
+ if (ret)
+ goto out;
+
ret = mt76_connac_mcu_set_rts_thresh(&dev->mt76, 0x92b,
phy != &dev->phy);
if (ret)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 194/885] wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (192 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 193/885] wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 195/885] wifi: mt76: mt7915: fix WED TxS reporting Greg Kroah-Hartman
` (693 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lorenzo Bianconi, Felix Fietkau,
Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 49bd78282e79ad177d14f37f4049f0605bf92dad ]
Always purge mcu skb queues in mt7915_mcu_exit routine even if
mt7915_firmware_state fails.
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index c4843f4de34ff..bcfc30d669c20 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -2299,13 +2299,14 @@ void mt7915_mcu_exit(struct mt7915_dev *dev)
__mt76_mcu_restart(&dev->mt76);
if (mt7915_firmware_state(dev, false)) {
dev_err(dev->mt76.dev, "Failed to exit mcu\n");
- return;
+ goto out;
}
mt76_wr(dev, MT_TOP_LPCR_HOST_BAND(0), MT_TOP_LPCR_HOST_FW_OWN);
if (dev->hif2)
mt76_wr(dev, MT_TOP_LPCR_HOST_BAND(1),
MT_TOP_LPCR_HOST_FW_OWN);
+out:
skb_queue_purge(&dev->mt76.mcu.res_q);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 195/885] wifi: mt76: mt7915: fix WED TxS reporting
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (193 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 194/885] wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 196/885] wifi: mt76: add memory barrier to SDIO queue kick Greg Kroah-Hartman
` (692 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sujuan Chen, Ryder Lee,
Felix Fietkau, Sasha Levin
From: Ryder Lee <ryder.lee@mediatek.com>
[ Upstream commit 0d7084e209a9e2c924cb0d6e7f1f978db2a54127 ]
The previous commit forgot to remove a leftover check.
Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device")
Reported-By: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index e6bf6e04d4b9c..1f3b7e7f48d50 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -997,9 +997,6 @@ static void mt7915_mac_add_txs(struct mt7915_dev *dev, void *data)
u16 wcidx;
u8 pid;
- if (le32_get_bits(txs_data[0], MT_TXS0_TXS_FORMAT) > 1)
- return;
-
wcidx = le32_get_bits(txs_data[2], MT_TXS2_WCID);
pid = le32_get_bits(txs_data[3], MT_TXS3_PID);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 196/885] wifi: mt76: add memory barrier to SDIO queue kick
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (194 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 195/885] wifi: mt76: mt7915: fix WED TxS reporting Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 197/885] wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read Greg Kroah-Hartman
` (691 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Deren Wu,
AngeloGioacchino Del Regno, Felix Fietkau, Sasha Levin
From: Deren Wu <deren.wu@mediatek.com>
[ Upstream commit 5f54237ad798f41cb6a503271aa9ca47188cfb9b ]
Ensure the entry has been fully updated before SDIO bus worker access
it. This patch would fix potential memory risk in both mt7663s and
mt7921s.
Fixes: 764dee47e2c1 ("mt76: sdio: move common code in mt76_sdio module")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/sdio.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/sdio.c b/drivers/net/wireless/mediatek/mt76/sdio.c
index 0ec308f99af5a..176207f3177c4 100644
--- a/drivers/net/wireless/mediatek/mt76/sdio.c
+++ b/drivers/net/wireless/mediatek/mt76/sdio.c
@@ -562,6 +562,10 @@ mt76s_tx_queue_skb_raw(struct mt76_dev *dev, struct mt76_queue *q,
q->entry[q->head].buf_sz = len;
q->entry[q->head].skb = skb;
+
+ /* ensure the entry fully updated before bus access */
+ smp_wmb();
+
q->head = (q->head + 1) % q->ndesc;
q->queued++;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 197/885] wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (195 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 196/885] wifi: mt76: add memory barrier to SDIO queue kick Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 198/885] net/mlx5: Enhance debug print in page allocation failure Greg Kroah-Hartman
` (690 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Aaron Ma, Felix Fietkau, Sasha Levin
From: Aaron Ma <aaron.ma@canonical.com>
[ Upstream commit 888d89034f9eaeab9b5b75f13dbe35376c7dd471 ]
Kernel NULL pointer dereference when ACPI SAR table isn't implemented well.
Fix the error code of return to mark the ACPI SAR table as invalid.
[ 5.077128] mt7921e 0000:06:00.0: sar cnt = 0
[ 5.077381] BUG: kernel NULL pointer dereference, address:
0000000000000004
[ 5.077630] #PF: supervisor read access in kernel mode
[ 5.077883] #PF: error_code(0x0000) - not-present page
[ 5.078138] PGD 0 P4D 0
[ 5.078398] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 5.079202] RIP: 0010:mt7921_init_acpi_sar+0x106/0x220
[mt7921_common]
...
[ 5.080786] Call Trace:
[ 5.080786] <TASK>
[ 5.080786] mt7921_register_device+0x37d/0x490 [mt7921_common]
[ 5.080786] mt7921_pci_probe.part.0+0x2ee/0x310 [mt7921e]
[ 5.080786] mt7921_pci_probe+0x52/0x70 [mt7921e]
[ 5.080786] local_pci_probe+0x47/0x90
[ 5.080786] pci_call_probe+0x55/0x190
[ 5.080786] pci_device_probe+0x84/0x120
Fixes: f965333e491e ("mt76: mt7921: introduce ACPI SAR support")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c b/drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c
index 47e034a9b0037..ed9241d4aa641 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c
@@ -33,14 +33,17 @@ mt7921_acpi_read(struct mt7921_dev *dev, u8 *method, u8 **tbl, u32 *len)
sar_root->package.elements[0].type != ACPI_TYPE_INTEGER) {
dev_err(mdev->dev, "sar cnt = %d\n",
sar_root->package.count);
+ ret = -EINVAL;
goto free;
}
if (!*tbl) {
*tbl = devm_kzalloc(mdev->dev, sar_root->package.count,
GFP_KERNEL);
- if (!*tbl)
+ if (!*tbl) {
+ ret = -ENOMEM;
goto free;
+ }
}
if (len)
*len = sar_root->package.count;
@@ -52,9 +55,9 @@ mt7921_acpi_read(struct mt7921_dev *dev, u8 *method, u8 **tbl, u32 *len)
break;
*(*tbl + i) = (u8)sar_unit->integer.value;
}
-free:
ret = (i == sar_root->package.count) ? 0 : -EINVAL;
+free:
kfree(sar_root);
return ret;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 198/885] net/mlx5: Enhance debug print in page allocation failure
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (196 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 197/885] wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 199/885] irqchip: Fix refcount leak in platform_irqchip_probe Greg Kroah-Hartman
` (689 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eran Ben Elisha, Majd Dibbiny,
Jack Morgenstein, Saeed Mahameed, Sasha Levin
From: Jack Morgenstein <jackm@nvidia.com>
[ Upstream commit 7eef93003e5d20e1a6a6e59e12d914b5431cbda2 ]
Provide more details to aid debugging.
Fixes: bf0bf77f6519 ("mlx5: Support communicating arbitrary host page size to firmware")
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Majd Dibbiny <majd@nvidia.com>
Signed-off-by: Jack Morgenstein <jackm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
index 0eb50be175cc4..64d4e7125e9bb 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
@@ -219,7 +219,8 @@ static int alloc_4k(struct mlx5_core_dev *dev, u64 *addr, u32 function)
n = find_first_bit(&fp->bitmask, 8 * sizeof(fp->bitmask));
if (n >= MLX5_NUM_4K_IN_PAGE) {
- mlx5_core_warn(dev, "alloc 4k bug\n");
+ mlx5_core_warn(dev, "alloc 4k bug: fw page = 0x%llx, n = %u, bitmask: %lu, max num of 4K pages: %d\n",
+ fp->addr, n, fp->bitmask, MLX5_NUM_4K_IN_PAGE);
return -ENOENT;
}
clear_bit(n, &fp->bitmask);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 199/885] irqchip: Fix refcount leak in platform_irqchip_probe
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (197 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 198/885] net/mlx5: Enhance debug print in page allocation failure Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 200/885] irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains Greg Kroah-Hartman
` (688 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miaoqian Lin, Marc Zyngier, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit 6caa5a2b78f5f53c433d3a3781e53325da22f0ac ]
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: f8410e626569 ("irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230102121318.3990586-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/irqchip/irqchip.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c
index 3570f0a588c4b..7899607fbee8d 100644
--- a/drivers/irqchip/irqchip.c
+++ b/drivers/irqchip/irqchip.c
@@ -38,8 +38,10 @@ int platform_irqchip_probe(struct platform_device *pdev)
struct device_node *par_np = of_irq_find_parent(np);
of_irq_init_cb_t irq_init_cb = of_device_get_match_data(&pdev->dev);
- if (!irq_init_cb)
+ if (!irq_init_cb) {
+ of_node_put(par_np);
return -EINVAL;
+ }
if (par_np == np)
par_np = NULL;
@@ -52,8 +54,10 @@ int platform_irqchip_probe(struct platform_device *pdev)
* interrupt controller. The actual initialization callback of this
* interrupt controller can check for specific domains as necessary.
*/
- if (par_np && !irq_find_matching_host(par_np, DOMAIN_BUS_ANY))
+ if (par_np && !irq_find_matching_host(par_np, DOMAIN_BUS_ANY)) {
+ of_node_put(par_np);
return -EPROBE_DEFER;
+ }
return irq_init_cb(np, par_np);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 200/885] irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (198 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 199/885] irqchip: Fix refcount leak in platform_irqchip_probe Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 201/885] irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe Greg Kroah-Hartman
` (687 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miaoqian Lin, Marc Zyngier, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit 071d068b89e95d1b078aa6bbcb9d0961b77d6aa1 ]
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: e6b78f2c3e14 ("irqchip: Add the Alpine MSIX interrupt controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230102082811.3947760-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/irqchip/irq-alpine-msi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/irqchip/irq-alpine-msi.c b/drivers/irqchip/irq-alpine-msi.c
index 5ddb8e578ac6a..fc1ef7de37973 100644
--- a/drivers/irqchip/irq-alpine-msi.c
+++ b/drivers/irqchip/irq-alpine-msi.c
@@ -199,6 +199,7 @@ static int alpine_msix_init_domains(struct alpine_msix_data *priv,
}
gic_domain = irq_find_host(gic_node);
+ of_node_put(gic_node);
if (!gic_domain) {
pr_err("Failed to find the GIC domain\n");
return -ENXIO;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 201/885] irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (199 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 200/885] irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 202/885] irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe Greg Kroah-Hartman
` (686 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miaoqian Lin, Marc Zyngier, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit 9419e700021a393f67be36abd0c4f3acc6139041 ]
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: a68a63cb4dfc ("irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230102084208.3951758-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/irqchip/irq-mvebu-gicp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/irqchip/irq-mvebu-gicp.c b/drivers/irqchip/irq-mvebu-gicp.c
index fe88a782173dd..c43a345061d53 100644
--- a/drivers/irqchip/irq-mvebu-gicp.c
+++ b/drivers/irqchip/irq-mvebu-gicp.c
@@ -221,6 +221,7 @@ static int mvebu_gicp_probe(struct platform_device *pdev)
}
parent_domain = irq_find_host(irq_parent_dn);
+ of_node_put(irq_parent_dn);
if (!parent_domain) {
dev_err(&pdev->dev, "failed to find parent IRQ domain\n");
return -ENODEV;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 202/885] irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (200 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 201/885] irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 203/885] s390/mem_detect: fix detect_memory() error handling Greg Kroah-Hartman
` (685 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miaoqian Lin, Marc Zyngier, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit 02298b7bae12936ca313975b02e7f98b06670d37 ]
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: cd844b0715ce ("irqchip/ti-sci-intr: Add support for Interrupt Router driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230102085611.3955984-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/irqchip/irq-ti-sci-intr.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/irqchip/irq-ti-sci-intr.c b/drivers/irqchip/irq-ti-sci-intr.c
index fe8fad22bcf96..020ddf29efb80 100644
--- a/drivers/irqchip/irq-ti-sci-intr.c
+++ b/drivers/irqchip/irq-ti-sci-intr.c
@@ -236,6 +236,7 @@ static int ti_sci_intr_irq_domain_probe(struct platform_device *pdev)
}
parent_domain = irq_find_host(parent_node);
+ of_node_put(parent_node);
if (!parent_domain) {
dev_err(dev, "Failed to find IRQ parent domain\n");
return -ENODEV;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 203/885] s390/mem_detect: fix detect_memory() error handling
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (201 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 202/885] irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 204/885] s390/vmem: fix empty page tables cleanup under KASAN Greg Kroah-Hartman
` (684 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexander Gordeev, Vasily Gorbik,
Heiko Carstens, Sasha Levin
From: Vasily Gorbik <gor@linux.ibm.com>
[ Upstream commit 3400c35a4090704e6c465449616ab7e67a9209e7 ]
Currently if for some reason sclp_early_read_info() fails,
sclp_early_get_memsize() will not set max_physmem_end and it
will stay uninitialized. Any garbage value other than 0 will lead
to detect_memory() taking wrong path or returning a garbage value
as max_physmem_end. To avoid that simply initialize max_physmem_end.
Fixes: 73045a08cf55 ("s390: unify identity mapping limits handling")
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/boot/mem_detect.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/boot/mem_detect.c b/arch/s390/boot/mem_detect.c
index 7fa1a32ea0f3f..0a5821ef4f1fd 100644
--- a/arch/s390/boot/mem_detect.c
+++ b/arch/s390/boot/mem_detect.c
@@ -165,7 +165,7 @@ static void search_mem_end(void)
unsigned long detect_memory(void)
{
- unsigned long max_physmem_end;
+ unsigned long max_physmem_end = 0;
sclp_early_get_memsize(&max_physmem_end);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 204/885] s390/vmem: fix empty page tables cleanup under KASAN
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (202 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 203/885] s390/mem_detect: fix detect_memory() error handling Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 205/885] s390/boot: cleanup decompressor header files Greg Kroah-Hartman
` (683 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexander Gordeev, Vasily Gorbik,
Heiko Carstens, Sasha Levin
From: Vasily Gorbik <gor@linux.ibm.com>
[ Upstream commit 108303b0a2d27cb14eed565e33e64ad9eefe5d7e ]
Commit b9ff81003cf1 ("s390/vmem: cleanup empty page tables") introduced
empty page tables cleanup in vmem code, but when the kernel is built
with KASAN enabled the code has no effect due to wrong KASAN shadow
memory intersection condition, which effectively ignores any memory
range below KASAN shadow. Fix intersection condition to make code
work as anticipated.
Fixes: b9ff81003cf1 ("s390/vmem: cleanup empty page tables")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/mm/vmem.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index ee1a97078527b..9a0ce5315f36d 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -297,7 +297,7 @@ static void try_free_pmd_table(pud_t *pud, unsigned long start)
if (end > VMALLOC_START)
return;
#ifdef CONFIG_KASAN
- if (start < KASAN_SHADOW_END && KASAN_SHADOW_START > end)
+ if (start < KASAN_SHADOW_END && end > KASAN_SHADOW_START)
return;
#endif
pmd = pmd_offset(pud, start);
@@ -372,7 +372,7 @@ static void try_free_pud_table(p4d_t *p4d, unsigned long start)
if (end > VMALLOC_START)
return;
#ifdef CONFIG_KASAN
- if (start < KASAN_SHADOW_END && KASAN_SHADOW_START > end)
+ if (start < KASAN_SHADOW_END && end > KASAN_SHADOW_START)
return;
#endif
@@ -426,7 +426,7 @@ static void try_free_p4d_table(pgd_t *pgd, unsigned long start)
if (end > VMALLOC_START)
return;
#ifdef CONFIG_KASAN
- if (start < KASAN_SHADOW_END && KASAN_SHADOW_START > end)
+ if (start < KASAN_SHADOW_END && end > KASAN_SHADOW_START)
return;
#endif
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 205/885] s390/boot: cleanup decompressor header files
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (203 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 204/885] s390/vmem: fix empty page tables cleanup under KASAN Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 206/885] s390/mem_detect: rely on diag260() if sclp_early_get_memsize() fails Greg Kroah-Hartman
` (682 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Heiko Carstens, Alexander Gordeev,
Sasha Levin
From: Alexander Gordeev <agordeev@linux.ibm.com>
[ Upstream commit 9c3205b2b062420c26b33924b910880889acf832 ]
Move declarations to appropriate header files. Instead of cryptic
casting directly assign struct vmlinux_info type to _vmlinux_info
linker script variable - wich it actually is.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Stable-dep-of: 22476f47b6b7 ("s390/boot: fix mem_detect extended area allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/boot/boot.h | 24 ++++++++++++++++++++++--
arch/s390/boot/decompressor.c | 1 +
arch/s390/boot/decompressor.h | 26 --------------------------
3 files changed, 23 insertions(+), 28 deletions(-)
diff --git a/arch/s390/boot/boot.h b/arch/s390/boot/boot.h
index 70418389414d3..f6e82cf7851e2 100644
--- a/arch/s390/boot/boot.h
+++ b/arch/s390/boot/boot.h
@@ -8,10 +8,26 @@
#ifndef __ASSEMBLY__
+struct vmlinux_info {
+ unsigned long default_lma;
+ void (*entry)(void);
+ unsigned long image_size; /* does not include .bss */
+ unsigned long bss_size; /* uncompressed image .bss size */
+ unsigned long bootdata_off;
+ unsigned long bootdata_size;
+ unsigned long bootdata_preserved_off;
+ unsigned long bootdata_preserved_size;
+ unsigned long dynsym_start;
+ unsigned long rela_dyn_start;
+ unsigned long rela_dyn_end;
+ unsigned long amode31_size;
+};
+
void startup_kernel(void);
unsigned long detect_memory(void);
bool is_ipl_block_dump(void);
void store_ipl_parmblock(void);
+unsigned long read_ipl_report(unsigned long safe_offset);
void setup_boot_command_line(void);
void parse_boot_command_line(void);
void verify_facilities(void);
@@ -20,6 +36,7 @@ void sclp_early_setup_buffer(void);
void print_pgm_check_info(void);
unsigned long get_random_base(unsigned long safe_addr);
void __printf(1, 2) decompressor_printk(const char *fmt, ...);
+void error(char *m);
/* Symbols defined by linker scripts */
extern const char kernel_version[];
@@ -31,8 +48,11 @@ extern char __boot_data_start[], __boot_data_end[];
extern char __boot_data_preserved_start[], __boot_data_preserved_end[];
extern char _decompressor_syms_start[], _decompressor_syms_end[];
extern char _stack_start[], _stack_end[];
-
-unsigned long read_ipl_report(unsigned long safe_offset);
+extern char _end[];
+extern unsigned char _compressed_start[];
+extern unsigned char _compressed_end[];
+extern struct vmlinux_info _vmlinux_info;
+#define vmlinux _vmlinux_info
#endif /* __ASSEMBLY__ */
#endif /* BOOT_BOOT_H */
diff --git a/arch/s390/boot/decompressor.c b/arch/s390/boot/decompressor.c
index 623f6775d01d7..aad6f31fbd3d9 100644
--- a/arch/s390/boot/decompressor.c
+++ b/arch/s390/boot/decompressor.c
@@ -11,6 +11,7 @@
#include <linux/string.h>
#include <asm/page.h>
#include "decompressor.h"
+#include "boot.h"
/*
* gzip declarations
diff --git a/arch/s390/boot/decompressor.h b/arch/s390/boot/decompressor.h
index f75cc31a77dd9..92b81d2ea35d6 100644
--- a/arch/s390/boot/decompressor.h
+++ b/arch/s390/boot/decompressor.h
@@ -2,37 +2,11 @@
#ifndef BOOT_COMPRESSED_DECOMPRESSOR_H
#define BOOT_COMPRESSED_DECOMPRESSOR_H
-#include <linux/stddef.h>
-
#ifdef CONFIG_KERNEL_UNCOMPRESSED
static inline void *decompress_kernel(void) { return NULL; }
#else
void *decompress_kernel(void);
#endif
unsigned long mem_safe_offset(void);
-void error(char *m);
-
-struct vmlinux_info {
- unsigned long default_lma;
- void (*entry)(void);
- unsigned long image_size; /* does not include .bss */
- unsigned long bss_size; /* uncompressed image .bss size */
- unsigned long bootdata_off;
- unsigned long bootdata_size;
- unsigned long bootdata_preserved_off;
- unsigned long bootdata_preserved_size;
- unsigned long dynsym_start;
- unsigned long rela_dyn_start;
- unsigned long rela_dyn_end;
- unsigned long amode31_size;
-};
-
-/* Symbols defined by linker scripts */
-extern char _end[];
-extern unsigned char _compressed_start[];
-extern unsigned char _compressed_end[];
-extern char _vmlinux_info[];
-
-#define vmlinux (*(struct vmlinux_info *)_vmlinux_info)
#endif /* BOOT_COMPRESSED_DECOMPRESSOR_H */
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 206/885] s390/mem_detect: rely on diag260() if sclp_early_get_memsize() fails
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (204 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 205/885] s390/boot: cleanup decompressor header files Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 207/885] s390/boot: fix mem_detect extended area allocation Greg Kroah-Hartman
` (681 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexander Gordeev, Vasily Gorbik,
Heiko Carstens, Sasha Levin
From: Vasily Gorbik <gor@linux.ibm.com>
[ Upstream commit eb33f9eb304a4c18beb5ba6362eaa5c4beaf40d8 ]
In case sclp_early_get_memsize() fails but diag260() succeeds make sure
some sane value is returned. This error scenario is highly unlikely,
but this change makes system able to boot in such case.
Suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Stable-dep-of: 22476f47b6b7 ("s390/boot: fix mem_detect extended area allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/boot/mem_detect.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/boot/mem_detect.c b/arch/s390/boot/mem_detect.c
index 0a5821ef4f1fd..41792a3a5e364 100644
--- a/arch/s390/boot/mem_detect.c
+++ b/arch/s390/boot/mem_detect.c
@@ -176,7 +176,7 @@ unsigned long detect_memory(void)
if (!diag260()) {
mem_detect.info_source = MEM_DETECT_DIAG260;
- return max_physmem_end;
+ return max_physmem_end ?: get_mem_detect_end();
}
if (max_physmem_end) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 207/885] s390/boot: fix mem_detect extended area allocation
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (205 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 206/885] s390/mem_detect: rely on diag260() if sclp_early_get_memsize() fails Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 208/885] net: add sock_init_data_uid() Greg Kroah-Hartman
` (680 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexander Gordeev, Vasily Gorbik,
Heiko Carstens, Sasha Levin
From: Vasily Gorbik <gor@linux.ibm.com>
[ Upstream commit 22476f47b6b7fb7d066c71f67ebc11892adb0849 ]
Allocation of mem_detect extended area was not considered neither
in commit 9641b8cc733f ("s390/ipl: read IPL report at early boot")
nor in commit b2d24b97b2a9 ("s390/kernel: add support for kernel address
space layout randomization (KASLR)"). As a result mem_detect extended
theoretically may overlap with ipl report or randomized kernel image
position. But as mem_detect code will allocate extended area only
upon exceeding 255 online regions (which should alternate with offline
memory regions) it is not seen in practice.
To make sure mem_detect extended area does not overlap with ipl report
or randomized kernel position extend usage of "safe_addr". Make initrd
handling and mem_detect extended area allocation code move it further
right and make KASLR takes in into consideration as well.
Fixes: 9641b8cc733f ("s390/ipl: read IPL report at early boot")
Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/boot/boot.h | 4 +--
arch/s390/boot/kaslr.c | 6 -----
arch/s390/boot/mem_detect.c | 52 ++++++++++++-------------------------
arch/s390/boot/startup.c | 21 ++++++++-------
4 files changed, 31 insertions(+), 52 deletions(-)
diff --git a/arch/s390/boot/boot.h b/arch/s390/boot/boot.h
index f6e82cf7851e2..939a1b7806df2 100644
--- a/arch/s390/boot/boot.h
+++ b/arch/s390/boot/boot.h
@@ -24,10 +24,10 @@ struct vmlinux_info {
};
void startup_kernel(void);
-unsigned long detect_memory(void);
+unsigned long detect_memory(unsigned long *safe_addr);
bool is_ipl_block_dump(void);
void store_ipl_parmblock(void);
-unsigned long read_ipl_report(unsigned long safe_offset);
+unsigned long read_ipl_report(unsigned long safe_addr);
void setup_boot_command_line(void);
void parse_boot_command_line(void);
void verify_facilities(void);
diff --git a/arch/s390/boot/kaslr.c b/arch/s390/boot/kaslr.c
index e8d74d4f62aa5..58a8d8c8a1007 100644
--- a/arch/s390/boot/kaslr.c
+++ b/arch/s390/boot/kaslr.c
@@ -174,7 +174,6 @@ unsigned long get_random_base(unsigned long safe_addr)
{
unsigned long memory_limit = get_mem_detect_end();
unsigned long base_pos, max_pos, kernel_size;
- unsigned long kasan_needs;
int i;
memory_limit = min(memory_limit, ident_map_size);
@@ -186,12 +185,7 @@ unsigned long get_random_base(unsigned long safe_addr)
*/
memory_limit -= kasan_estimate_memory_needs(memory_limit);
- if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && initrd_data.start && initrd_data.size) {
- if (safe_addr < initrd_data.start + initrd_data.size)
- safe_addr = initrd_data.start + initrd_data.size;
- }
safe_addr = ALIGN(safe_addr, THREAD_SIZE);
-
kernel_size = vmlinux.image_size + vmlinux.bss_size;
if (safe_addr + kernel_size > memory_limit)
return 0;
diff --git a/arch/s390/boot/mem_detect.c b/arch/s390/boot/mem_detect.c
index 41792a3a5e364..daa1593171835 100644
--- a/arch/s390/boot/mem_detect.c
+++ b/arch/s390/boot/mem_detect.c
@@ -16,29 +16,10 @@ struct mem_detect_info __bootdata(mem_detect);
#define ENTRIES_EXTENDED_MAX \
(256 * (1020 / 2) * sizeof(struct mem_detect_block))
-/*
- * To avoid corrupting old kernel memory during dump, find lowest memory
- * chunk possible either right after the kernel end (decompressed kernel) or
- * after initrd (if it is present and there is no hole between the kernel end
- * and initrd)
- */
-static void *mem_detect_alloc_extended(void)
-{
- unsigned long offset = ALIGN(mem_safe_offset(), sizeof(u64));
-
- if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && initrd_data.start && initrd_data.size &&
- initrd_data.start < offset + ENTRIES_EXTENDED_MAX)
- offset = ALIGN(initrd_data.start + initrd_data.size, sizeof(u64));
-
- return (void *)offset;
-}
-
static struct mem_detect_block *__get_mem_detect_block_ptr(u32 n)
{
if (n < MEM_INLINED_ENTRIES)
return &mem_detect.entries[n];
- if (unlikely(!mem_detect.entries_extended))
- mem_detect.entries_extended = mem_detect_alloc_extended();
return &mem_detect.entries_extended[n - MEM_INLINED_ENTRIES];
}
@@ -147,7 +128,7 @@ static int tprot(unsigned long addr)
return rc;
}
-static void search_mem_end(void)
+static unsigned long search_mem_end(void)
{
unsigned long range = 1 << (MAX_PHYSMEM_BITS - 20); /* in 1MB blocks */
unsigned long offset = 0;
@@ -159,33 +140,34 @@ static void search_mem_end(void)
if (!tprot(pivot << 20))
offset = pivot;
}
-
- add_mem_detect_block(0, (offset + 1) << 20);
+ return (offset + 1) << 20;
}
-unsigned long detect_memory(void)
+unsigned long detect_memory(unsigned long *safe_addr)
{
unsigned long max_physmem_end = 0;
sclp_early_get_memsize(&max_physmem_end);
+ mem_detect.entries_extended = (struct mem_detect_block *)ALIGN(*safe_addr, sizeof(u64));
if (!sclp_early_read_storage_info()) {
mem_detect.info_source = MEM_DETECT_SCLP_STOR_INFO;
- return max_physmem_end;
- }
-
- if (!diag260()) {
+ } else if (!diag260()) {
mem_detect.info_source = MEM_DETECT_DIAG260;
- return max_physmem_end ?: get_mem_detect_end();
- }
-
- if (max_physmem_end) {
+ max_physmem_end = max_physmem_end ?: get_mem_detect_end();
+ } else if (max_physmem_end) {
add_mem_detect_block(0, max_physmem_end);
mem_detect.info_source = MEM_DETECT_SCLP_READ_INFO;
- return max_physmem_end;
+ } else {
+ max_physmem_end = search_mem_end();
+ add_mem_detect_block(0, max_physmem_end);
+ mem_detect.info_source = MEM_DETECT_BIN_SEARCH;
+ }
+
+ if (mem_detect.count > MEM_INLINED_ENTRIES) {
+ *safe_addr += (mem_detect.count - MEM_INLINED_ENTRIES) *
+ sizeof(struct mem_detect_block);
}
- search_mem_end();
- mem_detect.info_source = MEM_DETECT_BIN_SEARCH;
- return get_mem_detect_end();
+ return max_physmem_end;
}
diff --git a/arch/s390/boot/startup.c b/arch/s390/boot/startup.c
index 47ca3264c0230..e0863d28759a5 100644
--- a/arch/s390/boot/startup.c
+++ b/arch/s390/boot/startup.c
@@ -57,16 +57,17 @@ unsigned long mem_safe_offset(void)
}
#endif
-static void rescue_initrd(unsigned long addr)
+static unsigned long rescue_initrd(unsigned long safe_addr)
{
if (!IS_ENABLED(CONFIG_BLK_DEV_INITRD))
- return;
+ return safe_addr;
if (!initrd_data.start || !initrd_data.size)
- return;
- if (addr <= initrd_data.start)
- return;
- memmove((void *)addr, (void *)initrd_data.start, initrd_data.size);
- initrd_data.start = addr;
+ return safe_addr;
+ if (initrd_data.start < safe_addr) {
+ memmove((void *)safe_addr, (void *)initrd_data.start, initrd_data.size);
+ initrd_data.start = safe_addr;
+ }
+ return initrd_data.start + initrd_data.size;
}
static void copy_bootdata(void)
@@ -250,6 +251,7 @@ static unsigned long reserve_amode31(unsigned long safe_addr)
void startup_kernel(void)
{
+ unsigned long max_physmem_end;
unsigned long random_lma;
unsigned long safe_addr;
void *img;
@@ -265,12 +267,13 @@ void startup_kernel(void)
safe_addr = reserve_amode31(safe_addr);
safe_addr = read_ipl_report(safe_addr);
uv_query_info();
- rescue_initrd(safe_addr);
+ safe_addr = rescue_initrd(safe_addr);
sclp_early_read_info();
setup_boot_command_line();
parse_boot_command_line();
sanitize_prot_virt_host();
- setup_ident_map_size(detect_memory());
+ max_physmem_end = detect_memory(&safe_addr);
+ setup_ident_map_size(max_physmem_end);
setup_vmalloc_size();
setup_kernel_memory_layout();
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 208/885] net: add sock_init_data_uid()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (206 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 207/885] s390/boot: fix mem_detect extended area allocation Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 209/885] tun: tun_chr_open(): correctly initialize socket uid Greg Kroah-Hartman
` (679 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pietro Borrello, Eric Dumazet,
David S. Miller, Sasha Levin
From: Pietro Borrello <borrello@diag.uniroma1.it>
[ Upstream commit 584f3742890e966d2f0a1f3c418c9ead70b2d99e ]
Add sock_init_data_uid() to explicitly initialize the socket uid.
To initialise the socket uid, sock_init_data() assumes a the struct
socket* sock is always embedded in a struct socket_alloc, used to
access the corresponding inode uid. This may not be true.
Examples are sockets created in tun_chr_open() and tap_open().
Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/sock.h | 7 ++++++-
net/core/sock.c | 15 ++++++++++++---
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/include/net/sock.h b/include/net/sock.h
index 1f868764575c3..832a4a51de4d9 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1952,7 +1952,12 @@ void sk_common_release(struct sock *sk);
* Default socket callbacks and setup code
*/
-/* Initialise core socket variables */
+/* Initialise core socket variables using an explicit uid. */
+void sock_init_data_uid(struct socket *sock, struct sock *sk, kuid_t uid);
+
+/* Initialise core socket variables.
+ * Assumes struct socket *sock is embedded in a struct socket_alloc.
+ */
void sock_init_data(struct socket *sock, struct sock *sk);
/*
diff --git a/net/core/sock.c b/net/core/sock.c
index ba6ea61b3458b..4dfdcdfd00114 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -3359,7 +3359,7 @@ void sk_stop_timer_sync(struct sock *sk, struct timer_list *timer)
}
EXPORT_SYMBOL(sk_stop_timer_sync);
-void sock_init_data(struct socket *sock, struct sock *sk)
+void sock_init_data_uid(struct socket *sock, struct sock *sk, kuid_t uid)
{
sk_init_common(sk);
sk->sk_send_head = NULL;
@@ -3378,11 +3378,10 @@ void sock_init_data(struct socket *sock, struct sock *sk)
sk->sk_type = sock->type;
RCU_INIT_POINTER(sk->sk_wq, &sock->wq);
sock->sk = sk;
- sk->sk_uid = SOCK_INODE(sock)->i_uid;
} else {
RCU_INIT_POINTER(sk->sk_wq, NULL);
- sk->sk_uid = make_kuid(sock_net(sk)->user_ns, 0);
}
+ sk->sk_uid = uid;
rwlock_init(&sk->sk_callback_lock);
if (sk->sk_kern_sock)
@@ -3440,6 +3439,16 @@ void sock_init_data(struct socket *sock, struct sock *sk)
refcount_set(&sk->sk_refcnt, 1);
atomic_set(&sk->sk_drops, 0);
}
+EXPORT_SYMBOL(sock_init_data_uid);
+
+void sock_init_data(struct socket *sock, struct sock *sk)
+{
+ kuid_t uid = sock ?
+ SOCK_INODE(sock)->i_uid :
+ make_kuid(sock_net(sk)->user_ns, 0);
+
+ sock_init_data_uid(sock, sk, uid);
+}
EXPORT_SYMBOL(sock_init_data);
void lock_sock_nested(struct sock *sk, int subclass)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 209/885] tun: tun_chr_open(): correctly initialize socket uid
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (207 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 208/885] net: add sock_init_data_uid() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 210/885] tap: tap_open(): " Greg Kroah-Hartman
` (678 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pietro Borrello, Eric Dumazet,
David S. Miller, Sasha Levin
From: Pietro Borrello <borrello@diag.uniroma1.it>
[ Upstream commit a096ccca6e503a5c575717ff8a36ace27510ab0a ]
sock_init_data() assumes that the `struct socket` passed in input is
contained in a `struct socket_alloc` allocated with sock_alloc().
However, tun_chr_open() passes a `struct socket` embedded in a `struct
tun_file` allocated with sk_alloc().
This causes a type confusion when issuing a container_of() with
SOCK_INODE() in sock_init_data() which results in assigning a wrong
sk_uid to the `struct sock` in input.
On default configuration, the type confused field overlaps with the
high 4 bytes of `struct tun_struct __rcu *tun` of `struct tun_file`,
NULL at the time of call, which makes the uid of all tun sockets 0,
i.e., the root one.
Fix the assignment by using sock_init_data_uid().
Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/tun.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 24001112c3236..91d198aff2f9a 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -3449,7 +3449,7 @@ static int tun_chr_open(struct inode *inode, struct file * file)
tfile->socket.file = file;
tfile->socket.ops = &tun_socket_ops;
- sock_init_data(&tfile->socket, &tfile->sk);
+ sock_init_data_uid(&tfile->socket, &tfile->sk, inode->i_uid);
tfile->sk.sk_write_space = tun_sock_write_space;
tfile->sk.sk_sndbuf = INT_MAX;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 210/885] tap: tap_open(): correctly initialize socket uid
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (208 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 209/885] tun: tun_chr_open(): correctly initialize socket uid Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 211/885] OPP: fix error checking in opp_migrate_dentry() Greg Kroah-Hartman
` (677 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pietro Borrello, Eric Dumazet,
David S. Miller, Sasha Levin
From: Pietro Borrello <borrello@diag.uniroma1.it>
[ Upstream commit 66b2c338adce580dfce2199591e65e2bab889cff ]
sock_init_data() assumes that the `struct socket` passed in input is
contained in a `struct socket_alloc` allocated with sock_alloc().
However, tap_open() passes a `struct socket` embedded in a `struct
tap_queue` allocated with sk_alloc().
This causes a type confusion when issuing a container_of() with
SOCK_INODE() in sock_init_data() which results in assigning a wrong
sk_uid to the `struct sock` in input.
On default configuration, the type confused field overlaps with
padding bytes between `int vnet_hdr_sz` and `struct tap_dev __rcu
*tap` in `struct tap_queue`, which makes the uid of all tap sockets 0,
i.e., the root one.
Fix the assignment by using sock_init_data_uid().
Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/tap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/tap.c b/drivers/net/tap.c
index 9e75ed3f08ce5..760d8d1b6cba4 100644
--- a/drivers/net/tap.c
+++ b/drivers/net/tap.c
@@ -533,7 +533,7 @@ static int tap_open(struct inode *inode, struct file *file)
q->sock.state = SS_CONNECTED;
q->sock.file = file;
q->sock.ops = &tap_socket_ops;
- sock_init_data(&q->sock, &q->sk);
+ sock_init_data_uid(&q->sock, &q->sk, inode->i_uid);
q->sk.sk_write_space = tap_sock_write_space;
q->sk.sk_destruct = tap_sock_destruct;
q->flags = IFF_VNET_HDR | IFF_NO_PI | IFF_TAP;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 211/885] OPP: fix error checking in opp_migrate_dentry()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (209 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 210/885] tap: tap_open(): " Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 212/885] cpufreq: davinci: Fix clk use after free Greg Kroah-Hartman
` (676 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Qi Zheng, Viresh Kumar, Sasha Levin
From: Qi Zheng <zhengqi.arch@bytedance.com>
[ Upstream commit eca4c0eea53432ec4b711b2a8ad282cbad231b4f ]
Since commit ff9fb72bc077 ("debugfs: return error values,
not NULL") changed return value of debugfs_rename() in
error cases from %NULL to %ERR_PTR(-ERROR), we should
also check error values instead of NULL.
Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/opp/debugfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/opp/debugfs.c b/drivers/opp/debugfs.c
index 96a30a032c5f9..2c7fb683441ef 100644
--- a/drivers/opp/debugfs.c
+++ b/drivers/opp/debugfs.c
@@ -235,7 +235,7 @@ static void opp_migrate_dentry(struct opp_device *opp_dev,
dentry = debugfs_rename(rootdir, opp_dev->dentry, rootdir,
opp_table->dentry_name);
- if (!dentry) {
+ if (IS_ERR(dentry)) {
dev_err(dev, "%s: Failed to rename link from: %s to %s\n",
__func__, dev_name(opp_dev->dev), dev_name(dev));
return;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 212/885] cpufreq: davinci: Fix clk use after free
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (210 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 211/885] OPP: fix error checking in opp_migrate_dentry() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 213/885] Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds Greg Kroah-Hartman
` (675 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Uwe Kleine-König, Viresh Kumar,
Rafael J. Wysocki, Sasha Levin
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[ Upstream commit 5d8f384a9b4fc50f6a18405f1c08e5a87a77b5b3 ]
The remove function first frees the clks and only then calls
cpufreq_unregister_driver(). If one of the cpufreq callbacks is called
just before cpufreq_unregister_driver() is run, the freed clks might be
used.
Fixes: 6601b8030de3 ("davinci: add generic CPUFreq driver for DaVinci")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpufreq/davinci-cpufreq.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c
index 9e97f60f81996..ebb3a81026816 100644
--- a/drivers/cpufreq/davinci-cpufreq.c
+++ b/drivers/cpufreq/davinci-cpufreq.c
@@ -133,12 +133,14 @@ static int __init davinci_cpufreq_probe(struct platform_device *pdev)
static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
{
+ cpufreq_unregister_driver(&davinci_driver);
+
clk_put(cpufreq.armclk);
if (cpufreq.asyncclk)
clk_put(cpufreq.asyncclk);
- return cpufreq_unregister_driver(&davinci_driver);
+ return 0;
}
static struct platform_driver davinci_cpufreq_driver = {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 213/885] Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (211 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 212/885] cpufreq: davinci: Fix clk use after free Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 18:55 ` [6.1,213/885] " bluez.test.bot
2023-03-07 16:52 ` [PATCH 6.1 214/885] Bluetooth: L2CAP: Fix potential user-after-free Greg Kroah-Hartman
` (674 subsequent siblings)
887 siblings, 1 reply; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Luiz Augusto von Dentz,
Marcel Holtmann, Johan Hedberg, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, linux-bluetooth, netdev, Kees Cook,
Simon Horman, Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit a00a29b0eeea6caaaf9edc3dd284f81b072ee343 ]
The compiler thinks "conn" might be NULL after a call to hci_bind_bis(),
which cannot happen. Avoid any confusion by just making it not return a
value since it cannot fail. Fixes the warnings seen with GCC 13:
In function 'arch_atomic_dec_and_test',
inlined from 'atomic_dec_and_test' at ../include/linux/atomic/atomic-instrumented.h:576:9,
inlined from 'hci_conn_drop' at ../include/net/bluetooth/hci_core.h:1391:6,
inlined from 'hci_connect_bis' at ../net/bluetooth/hci_conn.c:2124:3:
../arch/x86/include/asm/rmwcc.h:37:9: warning: array subscript 0 is outside array bounds of 'atomic_t[0]' [-Warray-bounds=]
37 | asm volatile (fullop CC_SET(cc) \
| ^~~
...
In function 'hci_connect_bis':
cc1: note: source object is likely at address zero
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/hci_conn.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 3c3b79f2e4c03..09e7f841f149d 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -1983,16 +1983,14 @@ static void hci_iso_qos_setup(struct hci_dev *hdev, struct hci_conn *conn,
qos->latency = conn->le_conn_latency;
}
-static struct hci_conn *hci_bind_bis(struct hci_conn *conn,
- struct bt_iso_qos *qos)
+static void hci_bind_bis(struct hci_conn *conn,
+ struct bt_iso_qos *qos)
{
/* Update LINK PHYs according to QoS preference */
conn->le_tx_phy = qos->out.phy;
conn->le_tx_phy = qos->out.phy;
conn->iso_qos = *qos;
conn->state = BT_BOUND;
-
- return conn;
}
static int create_big_sync(struct hci_dev *hdev, void *data)
@@ -2128,11 +2126,7 @@ struct hci_conn *hci_connect_bis(struct hci_dev *hdev, bdaddr_t *dst,
if (IS_ERR(conn))
return conn;
- conn = hci_bind_bis(conn, qos);
- if (!conn) {
- hci_conn_drop(conn);
- return ERR_PTR(-ENOMEM);
- }
+ hci_bind_bis(conn, qos);
/* Add Basic Announcement into Peridic Adv Data if BASE is set */
if (base_len && base) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 214/885] Bluetooth: L2CAP: Fix potential user-after-free
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (212 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 213/885] Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 215/885] Bluetooth: hci_qca: get wakeup status from serdev device handle Greg Kroah-Hartman
` (673 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexander Coffin,
Luiz Augusto von Dentz, Sasha Levin
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
[ Upstream commit df5703348813235874d851934e957c3723d71644 ]
This fixes all instances of which requires to allocate a buffer calling
alloc_skb which may release the chan lock and reacquire later which
makes it possible that the chan is disconnected in the meantime.
Fixes: a6a5568c03c4 ("Bluetooth: Lock the L2CAP channel when sending")
Reported-by: Alexander Coffin <alex.coffin@matician.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/l2cap_core.c | 24 ------------------------
net/bluetooth/l2cap_sock.c | 8 ++++++++
2 files changed, 8 insertions(+), 24 deletions(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 9fdede5fe71c7..da85768b04b76 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -2683,14 +2683,6 @@ int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len)
if (IS_ERR(skb))
return PTR_ERR(skb);
- /* Channel lock is released before requesting new skb and then
- * reacquired thus we need to recheck channel state.
- */
- if (chan->state != BT_CONNECTED) {
- kfree_skb(skb);
- return -ENOTCONN;
- }
-
l2cap_do_send(chan, skb);
return len;
}
@@ -2735,14 +2727,6 @@ int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len)
if (IS_ERR(skb))
return PTR_ERR(skb);
- /* Channel lock is released before requesting new skb and then
- * reacquired thus we need to recheck channel state.
- */
- if (chan->state != BT_CONNECTED) {
- kfree_skb(skb);
- return -ENOTCONN;
- }
-
l2cap_do_send(chan, skb);
err = len;
break;
@@ -2763,14 +2747,6 @@ int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len)
*/
err = l2cap_segment_sdu(chan, &seg_queue, msg, len);
- /* The channel could have been closed while segmenting,
- * check that it is still connected.
- */
- if (chan->state != BT_CONNECTED) {
- __skb_queue_purge(&seg_queue);
- err = -ENOTCONN;
- }
-
if (err)
break;
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index ca8f07f3542b8..eebe256104bc0 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1624,6 +1624,14 @@ static struct sk_buff *l2cap_sock_alloc_skb_cb(struct l2cap_chan *chan,
if (!skb)
return ERR_PTR(err);
+ /* Channel lock is released before requesting new skb and then
+ * reacquired thus we need to recheck channel state.
+ */
+ if (chan->state != BT_CONNECTED) {
+ kfree_skb(skb);
+ return ERR_PTR(-ENOTCONN);
+ }
+
skb->priority = sk->sk_priority;
bt_cb(skb)->l2cap.chan = chan;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 215/885] Bluetooth: hci_qca: get wakeup status from serdev device handle
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (213 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 214/885] Bluetooth: L2CAP: Fix potential user-after-free Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 216/885] net: ipa: generic command param fix Greg Kroah-Hartman
` (672 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhengping Jiang,
Luiz Augusto von Dentz, Sasha Levin
From: Zhengping Jiang <jiangzp@google.com>
[ Upstream commit 03b0093f7b310493bc944a20f725228cfe0d3fea ]
Bluetooth controller attached via the UART is handled by the serdev driver.
Get the wakeup status from the device handle through serdev, instead of the
parent path.
Fixes: c1a74160eaf1 ("Bluetooth: hci_qca: Add device_may_wakeup support")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/hci_qca.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index e4398590b0edc..7b9fd5f104335 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1582,10 +1582,11 @@ static bool qca_wakeup(struct hci_dev *hdev)
struct hci_uart *hu = hci_get_drvdata(hdev);
bool wakeup;
- /* UART driver handles the interrupt from BT SoC.So we need to use
- * device handle of UART driver to get the status of device may wakeup.
+ /* BT SoC attached through the serial bus is handled by the serdev driver.
+ * So we need to use the device handle of the serdev driver to get the
+ * status of device may wakeup.
*/
- wakeup = device_may_wakeup(hu->serdev->ctrl->dev.parent);
+ wakeup = device_may_wakeup(&hu->serdev->ctrl->dev);
bt_dev_dbg(hu->hdev, "wakeup status : %d", wakeup);
return wakeup;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 216/885] net: ipa: generic command param fix
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (214 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 215/885] Bluetooth: hci_qca: get wakeup status from serdev device handle Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 217/885] s390: vfio-ap: tighten the NIB validity check Greg Kroah-Hartman
` (671 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alex Elder, David S. Miller, Sasha Levin
From: Alex Elder <elder@linaro.org>
[ Upstream commit 2df181f09c961377a55510a864216d48d787fe49 ]
Starting at IPA v4.11, the GSI_GENERIC_COMMAND GSI register got a
new PARAMS field. The code that encodes a value into that field
sets it unconditionally, which is wrong.
We currently only provide 0 as the field's value, so this error has
no real effect. Still, it's a bug, so let's fix it.
Fix an (unrelated) incorrect comment as well. Fields in the
ERROR_LOG GSI register actually *are* defined for IPA versions
prior to v3.5.1.
Fixes: fe68c43ce388 ("net: ipa: support enhanced channel flow control")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ipa/gsi.c | 3 ++-
drivers/net/ipa/gsi_reg.h | 1 -
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
index bea2da1c4c51d..f1a3938294866 100644
--- a/drivers/net/ipa/gsi.c
+++ b/drivers/net/ipa/gsi.c
@@ -1666,7 +1666,8 @@ static int gsi_generic_command(struct gsi *gsi, u32 channel_id,
val = u32_encode_bits(opcode, GENERIC_OPCODE_FMASK);
val |= u32_encode_bits(channel_id, GENERIC_CHID_FMASK);
val |= u32_encode_bits(GSI_EE_MODEM, GENERIC_EE_FMASK);
- val |= u32_encode_bits(params, GENERIC_PARAMS_FMASK);
+ if (gsi->version >= IPA_VERSION_4_11)
+ val |= u32_encode_bits(params, GENERIC_PARAMS_FMASK);
timeout = !gsi_command(gsi, GSI_GENERIC_CMD_OFFSET, val);
diff --git a/drivers/net/ipa/gsi_reg.h b/drivers/net/ipa/gsi_reg.h
index 3763359f208f7..e65f2f055cfff 100644
--- a/drivers/net/ipa/gsi_reg.h
+++ b/drivers/net/ipa/gsi_reg.h
@@ -372,7 +372,6 @@ enum gsi_general_id {
#define GSI_ERROR_LOG_OFFSET \
(0x0001f200 + 0x4000 * GSI_EE_AP)
-/* Fields below are present for IPA v3.5.1 and above */
#define ERR_ARG3_FMASK GENMASK(3, 0)
#define ERR_ARG2_FMASK GENMASK(7, 4)
#define ERR_ARG1_FMASK GENMASK(11, 8)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 217/885] s390: vfio-ap: tighten the NIB validity check
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (215 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 216/885] net: ipa: generic command param fix Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 218/885] s390/ap: fix status returned by ap_aqic() Greg Kroah-Hartman
` (670 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Halil Pasic, Janosch Frank,
Tony Krowiak, Pierre Morel, Heiko Carstens, Sasha Levin
From: Halil Pasic <pasic@linux.ibm.com>
[ Upstream commit a64a6d23874c574d30a9816124b2dc37467f3811 ]
The NIB is architecturally invalid if the address designates a
storage location that is not installed or if it is zero.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: ec89b55e3bce ("s390: ap: implement PAPQ AQIC interception in kernel")
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/s390/crypto/vfio_ap_ops.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index a109c59f18f78..934515959ebf4 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -349,6 +349,8 @@ static int vfio_ap_validate_nib(struct kvm_vcpu *vcpu, dma_addr_t *nib)
{
*nib = vcpu->run->s.regs.gprs[2];
+ if (!*nib)
+ return -EINVAL;
if (kvm_is_error_hva(gfn_to_hva(vcpu->kvm, *nib >> PAGE_SHIFT)))
return -EINVAL;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 218/885] s390/ap: fix status returned by ap_aqic()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (216 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 217/885] s390: vfio-ap: tighten the NIB validity check Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 219/885] s390/ap: fix status returned by ap_qact() Greg Kroah-Hartman
` (669 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Halil Pasic, Janosch Frank,
Harald Freudenberger, Heiko Carstens, Sasha Levin
From: Halil Pasic <pasic@linux.ibm.com>
[ Upstream commit 394740d7645ea767795074287769dd26dbd4d782 ]
There function ap_aqic() tries to grab the status from the
wrong part of the register. Thus we always end up with
zeros. Which is wrong, among others, because we detect
failures via status.response_code.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: 159491f3b509 ("s390/ap: rework assembler functions to use unions for in/out register variables")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/include/asm/ap.h | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/s390/include/asm/ap.h b/arch/s390/include/asm/ap.h
index f508f5025e388..876afe46f316d 100644
--- a/arch/s390/include/asm/ap.h
+++ b/arch/s390/include/asm/ap.h
@@ -239,7 +239,10 @@ static inline struct ap_queue_status ap_aqic(ap_qid_t qid,
union {
unsigned long value;
struct ap_qirq_ctrl qirqctrl;
- struct ap_queue_status status;
+ struct {
+ u32 _pad;
+ struct ap_queue_status status;
+ };
} reg1;
unsigned long reg2 = pa_ind;
@@ -253,7 +256,7 @@ static inline struct ap_queue_status ap_aqic(ap_qid_t qid,
" lgr %[reg1],1\n" /* gr1 (status) into reg1 */
: [reg1] "+&d" (reg1)
: [reg0] "d" (reg0), [reg2] "d" (reg2)
- : "cc", "0", "1", "2");
+ : "cc", "memory", "0", "1", "2");
return reg1.status;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 219/885] s390/ap: fix status returned by ap_qact()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (217 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 218/885] s390/ap: fix status returned by ap_aqic() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 220/885] libbpf: Fix alen calculation in libbpf_nla_dump_errormsg() Greg Kroah-Hartman
` (668 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Halil Pasic, Harald Freudenberger,
Heiko Carstens, Sasha Levin
From: Halil Pasic <pasic@linux.ibm.com>
[ Upstream commit a2522c80f074c35254974fec39fffe8b8d75befe ]
Since commit 159491f3b509 ("s390/ap: rework assembler functions to use
unions for in/out register variables") the function ap_qact() tries to
grab the status from the wrong part of the register. Thus we always end
up with zeros. Which is wrong, among others, because we detect failures
via status.response_code.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Harald Freudenberger <freude@linux.ibm.com>
Fixes: 159491f3b509 ("s390/ap: rework assembler functions to use unions for in/out register variables")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/include/asm/ap.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/s390/include/asm/ap.h b/arch/s390/include/asm/ap.h
index 876afe46f316d..57a2d6518d272 100644
--- a/arch/s390/include/asm/ap.h
+++ b/arch/s390/include/asm/ap.h
@@ -293,7 +293,10 @@ static inline struct ap_queue_status ap_qact(ap_qid_t qid, int ifbit,
unsigned long reg0 = qid | (5UL << 24) | ((ifbit & 0x01) << 22);
union {
unsigned long value;
- struct ap_queue_status status;
+ struct {
+ u32 _pad;
+ struct ap_queue_status status;
+ };
} reg1;
unsigned long reg2;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 220/885] libbpf: Fix alen calculation in libbpf_nla_dump_errormsg()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (218 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 219/885] s390/ap: fix status returned by ap_qact() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 221/885] xen/grant-dma-iommu: Implement a dummy probe_device() callback Greg Kroah-Hartman
` (667 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ilya Leoshkevich, Andrii Nakryiko,
Sasha Levin
From: Ilya Leoshkevich <iii@linux.ibm.com>
[ Upstream commit 17bcd27a08a21397698edf143084d7c87ce17946 ]
The code assumes that everything that comes after nlmsgerr are nlattrs.
When calculating their size, it does not account for the initial
nlmsghdr. This may lead to accessing uninitialized memory.
Fixes: bbf48c18ee0c ("libbpf: add error reporting in XDP")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-8-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/nlattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/bpf/nlattr.c b/tools/lib/bpf/nlattr.c
index 3900d052ed19e..975e265eab3bf 100644
--- a/tools/lib/bpf/nlattr.c
+++ b/tools/lib/bpf/nlattr.c
@@ -178,7 +178,7 @@ int libbpf_nla_dump_errormsg(struct nlmsghdr *nlh)
hlen += nlmsg_len(&err->msg);
attr = (struct nlattr *) ((void *) err + hlen);
- alen = nlh->nlmsg_len - hlen;
+ alen = (void *)nlh + nlh->nlmsg_len - (void *)attr;
if (libbpf_nla_parse(tb, NLMSGERR_ATTR_MAX, attr, alen,
extack_policy) != 0) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 221/885] xen/grant-dma-iommu: Implement a dummy probe_device() callback
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (219 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 220/885] libbpf: Fix alen calculation in libbpf_nla_dump_errormsg() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 222/885] rds: rds_rm_zerocopy_callback() correct order for list_add_tail() Greg Kroah-Hartman
` (666 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Viresh Kumar, Oleksandr Tyshchenko,
Stefano Stabellini, Juergen Gross, Sasha Levin
From: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
[ Upstream commit 2062f9fb6445451b189595e295765c69f43bc12e ]
Update stub IOMMU driver (which main purpose is to reuse generic
IOMMU device-tree bindings by Xen grant DMA-mapping layer on Arm)
according to the recent changes done in the following
commit 57365a04c921 ("iommu: Move bus setup to IOMMU device registration").
With probe_device() callback being called during IOMMU device registration,
the uninitialized callback just leads to the "kernel NULL pointer
dereference" issue during boot. Fix that by adding a dummy callback.
Looks like the release_device() callback is not mandatory to be
implemented as IOMMU framework makes sure that callback is initialized
before dereferencing.
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Fixes: 57365a04c921 ("iommu: Move bus setup to IOMMU device registration")
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20230208153649.3604857-1-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/xen/grant-dma-iommu.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/xen/grant-dma-iommu.c b/drivers/xen/grant-dma-iommu.c
index 16b8bc0c0b33d..6a9fe02c6bfcc 100644
--- a/drivers/xen/grant-dma-iommu.c
+++ b/drivers/xen/grant-dma-iommu.c
@@ -16,8 +16,15 @@ struct grant_dma_iommu_device {
struct iommu_device iommu;
};
-/* Nothing is really needed here */
-static const struct iommu_ops grant_dma_iommu_ops;
+static struct iommu_device *grant_dma_iommu_probe_device(struct device *dev)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+/* Nothing is really needed here except a dummy probe_device callback */
+static const struct iommu_ops grant_dma_iommu_ops = {
+ .probe_device = grant_dma_iommu_probe_device,
+};
static const struct of_device_id grant_dma_iommu_of_match[] = {
{ .compatible = "xen,grant-dma" },
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 222/885] rds: rds_rm_zerocopy_callback() correct order for list_add_tail()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (220 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 221/885] xen/grant-dma-iommu: Implement a dummy probe_device() callback Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 223/885] crypto: rsa-pkcs1pad - Use akcipher_request_complete Greg Kroah-Hartman
` (665 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paolo Abeni, Pietro Borrello,
David S. Miller, Sasha Levin
From: Pietro Borrello <borrello@diag.uniroma1.it>
[ Upstream commit 68762148d1b011d47bc2ceed7321739b5aea1e63 ]
rds_rm_zerocopy_callback() uses list_add_tail() with swapped
arguments. This links the list head with the new entry, losing
the references to the remaining part of the list.
Fixes: 9426bbc6de99 ("rds: use list structure to track information for zerocopy completion notification")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/rds/message.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/rds/message.c b/net/rds/message.c
index 9402bc941823f..f71e1237e03d4 100644
--- a/net/rds/message.c
+++ b/net/rds/message.c
@@ -118,7 +118,7 @@ static void rds_rm_zerocopy_callback(struct rds_sock *rs,
ck = &info->zcookies;
memset(ck, 0, sizeof(*ck));
WARN_ON(!rds_zcookie_add(info, cookie));
- list_add_tail(&q->zcookie_head, &info->rs_zcookie_next);
+ list_add_tail(&info->rs_zcookie_next, &q->zcookie_head);
spin_unlock_irqrestore(&q->lock, flags);
/* caller invokes rds_wake_sk_sleep() */
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 223/885] crypto: rsa-pkcs1pad - Use akcipher_request_complete
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (221 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 222/885] rds: rds_rm_zerocopy_callback() correct order for list_add_tail() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 224/885] m68k: /proc/hardware should depend on PROC_FS Greg Kroah-Hartman
` (664 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Herbert Xu, Sasha Levin
From: Herbert Xu <herbert@gondor.apana.org.au>
[ Upstream commit 564cabc0ca0bdfa8f0fc1ae74b24d0a7554522c5 ]
Use the akcipher_request_complete helper instead of calling the
completion function directly. In fact the previous code was buggy
in that EINPROGRESS was never passed back to the original caller.
Fixes: 3d5b1ecdea6f ("crypto: rsa - RSA padding algorithm")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
crypto/rsa-pkcs1pad.c | 34 +++++++++++++++-------------------
1 file changed, 15 insertions(+), 19 deletions(-)
diff --git a/crypto/rsa-pkcs1pad.c b/crypto/rsa-pkcs1pad.c
index 3285e3af43e14..3237b50baf3c5 100644
--- a/crypto/rsa-pkcs1pad.c
+++ b/crypto/rsa-pkcs1pad.c
@@ -214,16 +214,14 @@ static void pkcs1pad_encrypt_sign_complete_cb(
struct crypto_async_request *child_async_req, int err)
{
struct akcipher_request *req = child_async_req->data;
- struct crypto_async_request async_req;
if (err == -EINPROGRESS)
- return;
+ goto out;
+
+ err = pkcs1pad_encrypt_sign_complete(req, err);
- async_req.data = req->base.data;
- async_req.tfm = crypto_akcipher_tfm(crypto_akcipher_reqtfm(req));
- async_req.flags = child_async_req->flags;
- req->base.complete(&async_req,
- pkcs1pad_encrypt_sign_complete(req, err));
+out:
+ akcipher_request_complete(req, err);
}
static int pkcs1pad_encrypt(struct akcipher_request *req)
@@ -332,15 +330,14 @@ static void pkcs1pad_decrypt_complete_cb(
struct crypto_async_request *child_async_req, int err)
{
struct akcipher_request *req = child_async_req->data;
- struct crypto_async_request async_req;
if (err == -EINPROGRESS)
- return;
+ goto out;
+
+ err = pkcs1pad_decrypt_complete(req, err);
- async_req.data = req->base.data;
- async_req.tfm = crypto_akcipher_tfm(crypto_akcipher_reqtfm(req));
- async_req.flags = child_async_req->flags;
- req->base.complete(&async_req, pkcs1pad_decrypt_complete(req, err));
+out:
+ akcipher_request_complete(req, err);
}
static int pkcs1pad_decrypt(struct akcipher_request *req)
@@ -513,15 +510,14 @@ static void pkcs1pad_verify_complete_cb(
struct crypto_async_request *child_async_req, int err)
{
struct akcipher_request *req = child_async_req->data;
- struct crypto_async_request async_req;
if (err == -EINPROGRESS)
- return;
+ goto out;
- async_req.data = req->base.data;
- async_req.tfm = crypto_akcipher_tfm(crypto_akcipher_reqtfm(req));
- async_req.flags = child_async_req->flags;
- req->base.complete(&async_req, pkcs1pad_verify_complete(req, err));
+ err = pkcs1pad_verify_complete(req, err);
+
+out:
+ akcipher_request_complete(req, err);
}
/*
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 224/885] m68k: /proc/hardware should depend on PROC_FS
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (222 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 223/885] crypto: rsa-pkcs1pad - Use akcipher_request_complete Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 225/885] RISC-V: time: initialize hrtimer based broadcast clock event device Greg Kroah-Hartman
` (663 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Randy Dunlap, Geert Uytterhoeven,
Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 1e5b5df65af99013b4d31607ddb3ca5731dbe44d ]
When CONFIG_PROC_FS is not set, there is a build error for an unused
function. Make PROC_HARDWARE depend on PROC_FS to prevent this error.
In file included from ../arch/m68k/kernel/setup.c:3:
../arch/m68k/kernel/setup_mm.c:477:12: error: 'hardware_proc_show' defined but not used [-Werror=unused-function]
477 | static int hardware_proc_show(struct seq_file *m, void *v)
| ^~~~~~~~~~~~~~~~~~
Fixes: 66d857b08b8c ("m68k: merge m68k and m68knommu arch directories") # v3.0
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230209010825.24136-1-rdunlap@infradead.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/m68k/Kconfig.devices | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
index 6a87b4a5fcac2..e6e3efac18407 100644
--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -19,6 +19,7 @@ config HEARTBEAT
# We have a dedicated heartbeat LED. :-)
config PROC_HARDWARE
bool "/proc/hardware support"
+ depends on PROC_FS
help
Say Y here to support the /proc/hardware file, which gives you
access to information about the machine you're running on,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 225/885] RISC-V: time: initialize hrtimer based broadcast clock event device
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (223 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 224/885] m68k: /proc/hardware should depend on PROC_FS Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 226/885] clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use Greg Kroah-Hartman
` (662 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Samuel Holland, Conor Dooley,
Anup Patel, Palmer Dabbelt, Daniel Lezcano, Sasha Levin
From: Conor Dooley <conor.dooley@microchip.com>
[ Upstream commit 8b3b8fbb4896984b5564789a42240e4b3caddb61 ]
Similarly to commit 022eb8ae8b5e ("ARM: 8938/1: kernel: initialize
broadcast hrtimer based clock event device"), RISC-V needs to initiate
hrtimer based broadcast clock event device before C3STOP can be used.
Otherwise, the introduction of C3STOP for the RISC-V arch timer in
commit 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped
during CPU suspend") leaves us without any broadcast timer registered.
This prevents the kernel from entering oneshot mode, which breaks timer
behaviour, for example clock_nanosleep().
A test app that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250
& C3STOP enabled, the sleep times are rounded up to the next jiffy:
== CPU: 1 == == CPU: 2 == == CPU: 3 == == CPU: 4 ==
Mean: 7.974992 Mean: 7.976534 Mean: 7.962591 Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000 Hi: 10.495000 Hi: 8.864000 Hi: 4.736000
Lo: 6.087000 Lo: 6.380000 Lo: 4.872000 Lo: 3.403000
Samples: 521 Samples: 521 Samples: 521 Samples: 521
Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Fixes: 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Suggested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-2-apatel@ventanamicro.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/riscv/kernel/time.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/riscv/kernel/time.c b/arch/riscv/kernel/time.c
index 8217b0f67c6cb..1cf21db4fcc77 100644
--- a/arch/riscv/kernel/time.c
+++ b/arch/riscv/kernel/time.c
@@ -5,6 +5,7 @@
*/
#include <linux/of_clk.h>
+#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/delay.h>
#include <asm/sbi.h>
@@ -29,6 +30,8 @@ void __init time_init(void)
of_clk_init(NULL);
timer_probe();
+
+ tick_setup_hrtimer_broadcast();
}
void clocksource_arch_init(struct clocksource *cs)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 226/885] clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (224 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 225/885] RISC-V: time: initialize hrtimer based broadcast clock event device Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 227/885] wifi: iwl3945: Add missing check for create_singlethread_workqueue Greg Kroah-Hartman
` (661 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Matt Evans, Palmer Dabbelt,
Anup Patel, Daniel Lezcano, Sasha Levin
From: Matt Evans <mev@rivosinc.com>
[ Upstream commit 225b9596cb0227c1c1b1e4a836dad43595c3e61a ]
A static key is used to select between SBI and Sstc timer usage in
riscv_clock_next_event(), but currently the direction is resolved
after cpuhp_setup_state() is called (which sets the next event). The
first event will therefore fall through the sbi_set_timer() path; this
breaks Sstc-only systems. So, apply the jump patching before first
use.
Fixes: 9f7a8ff6391f ("RISC-V: Prefer sstc extension if available")
Signed-off-by: Matt Evans <mev@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/CDDAB2D0-264E-42F3-8E31-BA210BEB8EC1@rivosinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clocksource/timer-riscv.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index a0d66fabf0732..a01c2bd241349 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -177,6 +177,11 @@ static int __init riscv_timer_init_dt(struct device_node *n)
return error;
}
+ if (riscv_isa_extension_available(NULL, SSTC)) {
+ pr_info("Timer interrupt in S-mode is available via sstc extension\n");
+ static_branch_enable(&riscv_sstc_available);
+ }
+
error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING,
"clockevents/riscv/timer:starting",
riscv_timer_starting_cpu, riscv_timer_dying_cpu);
@@ -184,11 +189,6 @@ static int __init riscv_timer_init_dt(struct device_node *n)
pr_err("cpu hp setup state failed for RISCV timer [%d]\n",
error);
- if (riscv_isa_extension_available(NULL, SSTC)) {
- pr_info("Timer interrupt in S-mode is available via sstc extension\n");
- static_branch_enable(&riscv_sstc_available);
- }
-
return error;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 227/885] wifi: iwl3945: Add missing check for create_singlethread_workqueue
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (225 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 226/885] clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 228/885] wifi: iwl4965: Add missing check for create_singlethread_workqueue() Greg Kroah-Hartman
` (660 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Stanislaw Gruszka,
Kalle Valo, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit 1fdeb8b9f29dfd64805bb49475ac7566a3cb06cb ]
Add the check for the return value of the create_singlethread_workqueue
in order to avoid NULL pointer dereference.
Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230208063032.42763-2-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlegacy/3945-mac.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlegacy/3945-mac.c b/drivers/net/wireless/intel/iwlegacy/3945-mac.c
index 7352d5b2095f4..9054a910ca357 100644
--- a/drivers/net/wireless/intel/iwlegacy/3945-mac.c
+++ b/drivers/net/wireless/intel/iwlegacy/3945-mac.c
@@ -3378,10 +3378,12 @@ static DEVICE_ATTR(dump_errors, 0200, NULL, il3945_dump_error_log);
*
*****************************************************************************/
-static void
+static int
il3945_setup_deferred_work(struct il_priv *il)
{
il->workqueue = create_singlethread_workqueue(DRV_NAME);
+ if (!il->workqueue)
+ return -ENOMEM;
init_waitqueue_head(&il->wait_command_queue);
@@ -3398,6 +3400,8 @@ il3945_setup_deferred_work(struct il_priv *il)
timer_setup(&il->watchdog, il_bg_watchdog, 0);
tasklet_setup(&il->irq_tasklet, il3945_irq_tasklet);
+
+ return 0;
}
static void
@@ -3717,7 +3721,10 @@ il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
il_set_rxon_channel(il, &il->bands[NL80211_BAND_2GHZ].channels[5]);
- il3945_setup_deferred_work(il);
+ err = il3945_setup_deferred_work(il);
+ if (err)
+ goto out_remove_sysfs;
+
il3945_setup_handlers(il);
il_power_initialize(il);
@@ -3729,7 +3736,7 @@ il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err = il3945_setup_mac(il);
if (err)
- goto out_remove_sysfs;
+ goto out_destroy_workqueue;
il_dbgfs_register(il, DRV_NAME);
@@ -3738,9 +3745,10 @@ il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
-out_remove_sysfs:
+out_destroy_workqueue:
destroy_workqueue(il->workqueue);
il->workqueue = NULL;
+out_remove_sysfs:
sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
out_release_irq:
free_irq(il->pci_dev->irq, il);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 228/885] wifi: iwl4965: Add missing check for create_singlethread_workqueue()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (226 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 227/885] wifi: iwl3945: Add missing check for create_singlethread_workqueue Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 229/885] wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize() Greg Kroah-Hartman
` (659 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Stanislaw Gruszka,
Kalle Valo, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit 26e6775f75517ad6844fe5b79bc5f3fa8c22ee61 ]
Add the check for the return value of the create_singlethread_workqueue()
in order to avoid NULL pointer dereference.
Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230209010748.45454-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlegacy/4965-mac.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlegacy/4965-mac.c b/drivers/net/wireless/intel/iwlegacy/4965-mac.c
index 943de47170c70..78dee8ccfebfe 100644
--- a/drivers/net/wireless/intel/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/intel/iwlegacy/4965-mac.c
@@ -6211,10 +6211,12 @@ il4965_bg_txpower_work(struct work_struct *work)
mutex_unlock(&il->mutex);
}
-static void
+static int
il4965_setup_deferred_work(struct il_priv *il)
{
il->workqueue = create_singlethread_workqueue(DRV_NAME);
+ if (!il->workqueue)
+ return -ENOMEM;
init_waitqueue_head(&il->wait_command_queue);
@@ -6233,6 +6235,8 @@ il4965_setup_deferred_work(struct il_priv *il)
timer_setup(&il->watchdog, il_bg_watchdog, 0);
tasklet_setup(&il->irq_tasklet, il4965_irq_tasklet);
+
+ return 0;
}
static void
@@ -6617,7 +6621,10 @@ il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto out_disable_msi;
}
- il4965_setup_deferred_work(il);
+ err = il4965_setup_deferred_work(il);
+ if (err)
+ goto out_free_irq;
+
il4965_setup_handlers(il);
/*********************************************
@@ -6655,6 +6662,7 @@ il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
out_destroy_workqueue:
destroy_workqueue(il->workqueue);
il->workqueue = NULL;
+out_free_irq:
free_irq(il->pci_dev->irq, il);
out_disable_msi:
pci_disable_msi(il->pci_dev);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 229/885] wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (227 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 228/885] wifi: iwl4965: Add missing check for create_singlethread_workqueue() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 230/885] selftests/bpf: Fix out-of-srctree build Greg Kroah-Hartman
` (658 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dan Carpenter, Kalle Valo, Sasha Levin
From: Dan Carpenter <error27@gmail.com>
[ Upstream commit 3cfb7df24cee0f5fdc4cc5d3176cab9aadfcb430 ]
This code re-uses "i" to be the iterator for both the inside and outside
loops. It means the outside loop will exit earlier than intended.
Fixes: d219b7eb3792 ("mwifiex: handle BT coex event to adjust Rx BA window size")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Y+ERnaDaZD7RtLvX@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/marvell/mwifiex/11n.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c
index 4af57e6d43932..90e4011008981 100644
--- a/drivers/net/wireless/marvell/mwifiex/11n.c
+++ b/drivers/net/wireless/marvell/mwifiex/11n.c
@@ -878,7 +878,7 @@ mwifiex_send_delba_txbastream_tbl(struct mwifiex_private *priv, u8 tid)
*/
void mwifiex_update_ampdu_txwinsize(struct mwifiex_adapter *adapter)
{
- u8 i;
+ u8 i, j;
u32 tx_win_size;
struct mwifiex_private *priv;
@@ -909,8 +909,8 @@ void mwifiex_update_ampdu_txwinsize(struct mwifiex_adapter *adapter)
if (tx_win_size != priv->add_ba_param.tx_win_size) {
if (!priv->media_connected)
continue;
- for (i = 0; i < MAX_NUM_TID; i++)
- mwifiex_send_delba_txbastream_tbl(priv, i);
+ for (j = 0; j < MAX_NUM_TID; j++)
+ mwifiex_send_delba_txbastream_tbl(priv, j);
}
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 230/885] selftests/bpf: Fix out-of-srctree build
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (228 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 229/885] wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 231/885] ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models Greg Kroah-Hartman
` (657 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ilya Leoshkevich, Daniel Borkmann,
Sasha Levin
From: Ilya Leoshkevich <iii@linux.ibm.com>
[ Upstream commit 0b0757244754ea1d0721195c824770f5576e119e ]
Building BPF selftests out of srctree fails with:
make: *** No rule to make target '/linux-build//ima_setup.sh', needed by 'ima_setup.sh'. Stop.
The culprit is the rule that defines convenient shorthands like
"make test_progs", which builds $(OUTPUT)/test_progs. These shorthands
make sense only for binaries that are built though; scripts that live
in the source tree do not end up in $(OUTPUT).
Therefore drop $(TEST_PROGS) and $(TEST_PROGS_EXTENDED) from the rule.
The issue exists for a while, but it became a problem only after commit
d68ae4982cb7 ("selftests/bpf: Install all required files to run selftests"),
which added dependencies on these scripts.
Fixes: 03dcb78460c2 ("selftests/bpf: Add simple per-test targets to Makefile")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230208231211.283606-1-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/Makefile | 2 --
1 file changed, 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 1fda7448f4a2f..687249d99b5f1 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -149,8 +149,6 @@ endif
# NOTE: Semicolon at the end is critical to override lib.mk's default static
# rule for binaries.
$(notdir $(TEST_GEN_PROGS) \
- $(TEST_PROGS) \
- $(TEST_PROGS_EXTENDED) \
$(TEST_GEN_PROGS_EXTENDED) \
$(TEST_CUSTOM_PROGS)): %: $(OUTPUT)/% ;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 231/885] ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (229 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 230/885] selftests/bpf: Fix out-of-srctree build Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 232/885] ACPI: resource: Do IRQ override on all TongFang GMxRGxx Greg Kroah-Hartman
` (656 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Adam Niederer, Rafael J. Wysocki,
Sasha Levin
From: Adam Niederer <adam.niederer@gmail.com>
[ Upstream commit cb18703c179713056bd7e3bdfc2260ab4e8658f0 ]
Fix a regression introduced by commit 9946e39fe8d0 ("ACPI: resource: skip
IRQ override on AMD Zen platforms") on MAINGEAR Vector Pro 2 systems, which
causes the built-in keyboard to not work. This restores the functionality
by adding an IRQ override.
No other IRQs were being overridden before, so this should be all that is
needed for these systems. I have personally tested this on the 15" model
(MG-VCP2-15A3070T), and I have confirmation that the issue is present on
the 17" model (MG-VCP2-17A3070T).
Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Signed-off-by: Adam Niederer <adam.niederer@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/resource.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 192d1784e409b..1d9d3364bc2b5 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -478,6 +478,24 @@ static const struct dmi_system_id schenker_gm_rg[] = {
{ }
};
+static const struct dmi_system_id maingear_laptop[] = {
+ {
+ .ident = "MAINGEAR Vector Pro 2 15",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Micro Electronics Inc"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MG-VCP2-15A3070T"),
+ }
+ },
+ {
+ .ident = "MAINGEAR Vector Pro 2 17",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Micro Electronics Inc"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MG-VCP2-17A3070T"),
+ },
+ },
+ { }
+};
+
struct irq_override_cmp {
const struct dmi_system_id *system;
unsigned char irq;
@@ -493,6 +511,7 @@ static const struct irq_override_cmp override_table[] = {
{ lenovo_laptop, 6, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, true },
{ lenovo_laptop, 10, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, true },
{ schenker_gm_rg, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
+ { maingear_laptop, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
};
static bool acpi_dev_irq_override(u32 gsi, u8 triggering, u8 polarity,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 232/885] ACPI: resource: Do IRQ override on all TongFang GMxRGxx
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (230 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 231/885] ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 233/885] crypto: octeontx2 - Fix objects shared between several modules Greg Kroah-Hartman
` (655 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Werner Sembach, Rafael J. Wysocki,
Sasha Levin
From: Werner Sembach <wse@tuxedocomputers.com>
[ Upstream commit 17bb7046e7ce038a73ee97eaa804e0300c5199e2 ]
Apply commit 7592b79ba4a9 ("ACPI: resource: do IRQ override on XMG Core 15")
override for all vendors using this mainboard.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/resource.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 1d9d3364bc2b5..a222bda7e15b0 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -467,11 +467,10 @@ static const struct dmi_system_id lenovo_laptop[] = {
{ }
};
-static const struct dmi_system_id schenker_gm_rg[] = {
+static const struct dmi_system_id tongfang_gm_rg[] = {
{
- .ident = "XMG CORE 15 (M22)",
+ .ident = "TongFang GMxRGxx/XMG CORE 15 (M22)/TUXEDO Stellaris 15 Gen4 AMD",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
DMI_MATCH(DMI_BOARD_NAME, "GMxRGxx"),
},
},
@@ -510,7 +509,7 @@ static const struct irq_override_cmp override_table[] = {
{ asus_laptop, 1, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, false },
{ lenovo_laptop, 6, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, true },
{ lenovo_laptop, 10, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, true },
- { schenker_gm_rg, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
+ { tongfang_gm_rg, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
{ maingear_laptop, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 233/885] crypto: octeontx2 - Fix objects shared between several modules
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (231 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 232/885] ACPI: resource: Do IRQ override on all TongFang GMxRGxx Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 234/885] crypto: crypto4xx - Call dma_unmap_page when done Greg Kroah-Hartman
` (654 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Masahiro Yamada, Alexander Lobakin,
Herbert Xu, Sasha Levin
From: Alexander Lobakin <alobakin@pm.me>
[ Upstream commit 72bc4e71dbeedee0a446bcbc37c9bb25449072b7 ]
cn10k_cpt.o, otx2_cptlf.o and otx2_cpt_mbox_common.o are linked
into both rvu_cptpf and rvu_cptvf modules:
> scripts/Makefile.build:252: ./drivers/crypto/marvell/octeontx2/Makefile:
> cn10k_cpt.o is added to multiple modules: rvu_cptpf rvu_cptvf
> scripts/Makefile.build:252: ./drivers/crypto/marvell/octeontx2/Makefile:
> otx2_cptlf.o is added to multiple modules: rvu_cptpf rvu_cptvf
> scripts/Makefile.build:252: ./drivers/crypto/marvell/octeontx2/Makefile:
> otx2_cpt_mbox_common.o is added to multiple modules: rvu_cptpf rvu_cptvf
Despite they're build under the same Kconfig option
(CONFIG_CRYPTO_DEV_OCTEONTX2_CPT), it's better do link the common
code into a standalone module and export the shared functions. Under
certain circumstances, this can lead to the same situation as fixed
by commit 637a642f5ca5 ("zstd: Fixing mixed module-builtin objects").
Plus, those three common object files are relatively big to duplicate
them several times.
Introduce the new module, rvu_cptcommon, to provide the common
functions to both modules.
Fixes: 19d8e8c7be15 ("crypto: octeontx2 - add virtual function driver support")
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/marvell/octeontx2/Makefile | 11 +++++------
drivers/crypto/marvell/octeontx2/cn10k_cpt.c | 9 +++++++--
drivers/crypto/marvell/octeontx2/cn10k_cpt.h | 2 --
drivers/crypto/marvell/octeontx2/otx2_cpt_common.h | 2 --
.../marvell/octeontx2/otx2_cpt_mbox_common.c | 14 ++++++++++++--
drivers/crypto/marvell/octeontx2/otx2_cptlf.c | 11 +++++++++++
drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c | 2 ++
drivers/crypto/marvell/octeontx2/otx2_cptvf_main.c | 2 ++
8 files changed, 39 insertions(+), 14 deletions(-)
diff --git a/drivers/crypto/marvell/octeontx2/Makefile b/drivers/crypto/marvell/octeontx2/Makefile
index 965297e969546..f0f2942c1d278 100644
--- a/drivers/crypto/marvell/octeontx2/Makefile
+++ b/drivers/crypto/marvell/octeontx2/Makefile
@@ -1,11 +1,10 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_CRYPTO_DEV_OCTEONTX2_CPT) += rvu_cptpf.o rvu_cptvf.o
+obj-$(CONFIG_CRYPTO_DEV_OCTEONTX2_CPT) += rvu_cptcommon.o rvu_cptpf.o rvu_cptvf.o
+rvu_cptcommon-objs := cn10k_cpt.o otx2_cptlf.o otx2_cpt_mbox_common.o
rvu_cptpf-objs := otx2_cptpf_main.o otx2_cptpf_mbox.o \
- otx2_cpt_mbox_common.o otx2_cptpf_ucode.o otx2_cptlf.o \
- cn10k_cpt.o otx2_cpt_devlink.o
-rvu_cptvf-objs := otx2_cptvf_main.o otx2_cptvf_mbox.o otx2_cptlf.o \
- otx2_cpt_mbox_common.o otx2_cptvf_reqmgr.o \
- otx2_cptvf_algs.o cn10k_cpt.o
+ otx2_cptpf_ucode.o otx2_cpt_devlink.o
+rvu_cptvf-objs := otx2_cptvf_main.o otx2_cptvf_mbox.o \
+ otx2_cptvf_reqmgr.o otx2_cptvf_algs.o
ccflags-y += -I$(srctree)/drivers/net/ethernet/marvell/octeontx2/af
diff --git a/drivers/crypto/marvell/octeontx2/cn10k_cpt.c b/drivers/crypto/marvell/octeontx2/cn10k_cpt.c
index 1499ef75b5c22..93d22b3289919 100644
--- a/drivers/crypto/marvell/octeontx2/cn10k_cpt.c
+++ b/drivers/crypto/marvell/octeontx2/cn10k_cpt.c
@@ -7,6 +7,9 @@
#include "otx2_cptlf.h"
#include "cn10k_cpt.h"
+static void cn10k_cpt_send_cmd(union otx2_cpt_inst_s *cptinst, u32 insts_num,
+ struct otx2_cptlf_info *lf);
+
static struct cpt_hw_ops otx2_hw_ops = {
.send_cmd = otx2_cpt_send_cmd,
.cpt_get_compcode = otx2_cpt_get_compcode,
@@ -19,8 +22,8 @@ static struct cpt_hw_ops cn10k_hw_ops = {
.cpt_get_uc_compcode = cn10k_cpt_get_uc_compcode,
};
-void cn10k_cpt_send_cmd(union otx2_cpt_inst_s *cptinst, u32 insts_num,
- struct otx2_cptlf_info *lf)
+static void cn10k_cpt_send_cmd(union otx2_cpt_inst_s *cptinst, u32 insts_num,
+ struct otx2_cptlf_info *lf)
{
void __iomem *lmtline = lf->lmtline;
u64 val = (lf->slot & 0x7FF);
@@ -68,6 +71,7 @@ int cn10k_cptpf_lmtst_init(struct otx2_cptpf_dev *cptpf)
return 0;
}
+EXPORT_SYMBOL_NS_GPL(cn10k_cptpf_lmtst_init, CRYPTO_DEV_OCTEONTX2_CPT);
int cn10k_cptvf_lmtst_init(struct otx2_cptvf_dev *cptvf)
{
@@ -91,3 +95,4 @@ int cn10k_cptvf_lmtst_init(struct otx2_cptvf_dev *cptvf)
return 0;
}
+EXPORT_SYMBOL_NS_GPL(cn10k_cptvf_lmtst_init, CRYPTO_DEV_OCTEONTX2_CPT);
diff --git a/drivers/crypto/marvell/octeontx2/cn10k_cpt.h b/drivers/crypto/marvell/octeontx2/cn10k_cpt.h
index c091392b47e0f..aaefc7e38e060 100644
--- a/drivers/crypto/marvell/octeontx2/cn10k_cpt.h
+++ b/drivers/crypto/marvell/octeontx2/cn10k_cpt.h
@@ -28,8 +28,6 @@ static inline u8 otx2_cpt_get_uc_compcode(union otx2_cpt_res_s *result)
return ((struct cn9k_cpt_res_s *)result)->uc_compcode;
}
-void cn10k_cpt_send_cmd(union otx2_cpt_inst_s *cptinst, u32 insts_num,
- struct otx2_cptlf_info *lf);
int cn10k_cptpf_lmtst_init(struct otx2_cptpf_dev *cptpf);
int cn10k_cptvf_lmtst_init(struct otx2_cptvf_dev *cptvf);
diff --git a/drivers/crypto/marvell/octeontx2/otx2_cpt_common.h b/drivers/crypto/marvell/octeontx2/otx2_cpt_common.h
index 5012b7e669f07..6019066a6451a 100644
--- a/drivers/crypto/marvell/octeontx2/otx2_cpt_common.h
+++ b/drivers/crypto/marvell/octeontx2/otx2_cpt_common.h
@@ -145,8 +145,6 @@ int otx2_cpt_send_mbox_msg(struct otx2_mbox *mbox, struct pci_dev *pdev);
int otx2_cpt_send_af_reg_requests(struct otx2_mbox *mbox,
struct pci_dev *pdev);
-int otx2_cpt_add_read_af_reg(struct otx2_mbox *mbox, struct pci_dev *pdev,
- u64 reg, u64 *val, int blkaddr);
int otx2_cpt_add_write_af_reg(struct otx2_mbox *mbox, struct pci_dev *pdev,
u64 reg, u64 val, int blkaddr);
int otx2_cpt_read_af_reg(struct otx2_mbox *mbox, struct pci_dev *pdev,
diff --git a/drivers/crypto/marvell/octeontx2/otx2_cpt_mbox_common.c b/drivers/crypto/marvell/octeontx2/otx2_cpt_mbox_common.c
index a317319696eff..115997475beb3 100644
--- a/drivers/crypto/marvell/octeontx2/otx2_cpt_mbox_common.c
+++ b/drivers/crypto/marvell/octeontx2/otx2_cpt_mbox_common.c
@@ -19,6 +19,7 @@ int otx2_cpt_send_mbox_msg(struct otx2_mbox *mbox, struct pci_dev *pdev)
}
return ret;
}
+EXPORT_SYMBOL_NS_GPL(otx2_cpt_send_mbox_msg, CRYPTO_DEV_OCTEONTX2_CPT);
int otx2_cpt_send_ready_msg(struct otx2_mbox *mbox, struct pci_dev *pdev)
{
@@ -36,14 +37,17 @@ int otx2_cpt_send_ready_msg(struct otx2_mbox *mbox, struct pci_dev *pdev)
return otx2_cpt_send_mbox_msg(mbox, pdev);
}
+EXPORT_SYMBOL_NS_GPL(otx2_cpt_send_ready_msg, CRYPTO_DEV_OCTEONTX2_CPT);
int otx2_cpt_send_af_reg_requests(struct otx2_mbox *mbox, struct pci_dev *pdev)
{
return otx2_cpt_send_mbox_msg(mbox, pdev);
}
+EXPORT_SYMBOL_NS_GPL(otx2_cpt_send_af_reg_requests, CRYPTO_DEV_OCTEONTX2_CPT);
-int otx2_cpt_add_read_af_reg(struct otx2_mbox *mbox, struct pci_dev *pdev,
- u64 reg, u64 *val, int blkaddr)
+static int otx2_cpt_add_read_af_reg(struct otx2_mbox *mbox,
+ struct pci_dev *pdev, u64 reg,
+ u64 *val, int blkaddr)
{
struct cpt_rd_wr_reg_msg *reg_msg;
@@ -91,6 +95,7 @@ int otx2_cpt_add_write_af_reg(struct otx2_mbox *mbox, struct pci_dev *pdev,
return 0;
}
+EXPORT_SYMBOL_NS_GPL(otx2_cpt_add_write_af_reg, CRYPTO_DEV_OCTEONTX2_CPT);
int otx2_cpt_read_af_reg(struct otx2_mbox *mbox, struct pci_dev *pdev,
u64 reg, u64 *val, int blkaddr)
@@ -103,6 +108,7 @@ int otx2_cpt_read_af_reg(struct otx2_mbox *mbox, struct pci_dev *pdev,
return otx2_cpt_send_mbox_msg(mbox, pdev);
}
+EXPORT_SYMBOL_NS_GPL(otx2_cpt_read_af_reg, CRYPTO_DEV_OCTEONTX2_CPT);
int otx2_cpt_write_af_reg(struct otx2_mbox *mbox, struct pci_dev *pdev,
u64 reg, u64 val, int blkaddr)
@@ -115,6 +121,7 @@ int otx2_cpt_write_af_reg(struct otx2_mbox *mbox, struct pci_dev *pdev,
return otx2_cpt_send_mbox_msg(mbox, pdev);
}
+EXPORT_SYMBOL_NS_GPL(otx2_cpt_write_af_reg, CRYPTO_DEV_OCTEONTX2_CPT);
int otx2_cpt_attach_rscrs_msg(struct otx2_cptlfs_info *lfs)
{
@@ -170,6 +177,7 @@ int otx2_cpt_detach_rsrcs_msg(struct otx2_cptlfs_info *lfs)
return ret;
}
+EXPORT_SYMBOL_NS_GPL(otx2_cpt_detach_rsrcs_msg, CRYPTO_DEV_OCTEONTX2_CPT);
int otx2_cpt_msix_offset_msg(struct otx2_cptlfs_info *lfs)
{
@@ -202,6 +210,7 @@ int otx2_cpt_msix_offset_msg(struct otx2_cptlfs_info *lfs)
}
return ret;
}
+EXPORT_SYMBOL_NS_GPL(otx2_cpt_msix_offset_msg, CRYPTO_DEV_OCTEONTX2_CPT);
int otx2_cpt_sync_mbox_msg(struct otx2_mbox *mbox)
{
@@ -216,3 +225,4 @@ int otx2_cpt_sync_mbox_msg(struct otx2_mbox *mbox)
return otx2_mbox_check_rsp_msgs(mbox, 0);
}
+EXPORT_SYMBOL_NS_GPL(otx2_cpt_sync_mbox_msg, CRYPTO_DEV_OCTEONTX2_CPT);
diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptlf.c b/drivers/crypto/marvell/octeontx2/otx2_cptlf.c
index c8350fcd60fab..71e5f79431afa 100644
--- a/drivers/crypto/marvell/octeontx2/otx2_cptlf.c
+++ b/drivers/crypto/marvell/octeontx2/otx2_cptlf.c
@@ -274,6 +274,8 @@ void otx2_cptlf_unregister_interrupts(struct otx2_cptlfs_info *lfs)
}
cptlf_disable_intrs(lfs);
}
+EXPORT_SYMBOL_NS_GPL(otx2_cptlf_unregister_interrupts,
+ CRYPTO_DEV_OCTEONTX2_CPT);
static int cptlf_do_register_interrrupts(struct otx2_cptlfs_info *lfs,
int lf_num, int irq_offset,
@@ -321,6 +323,7 @@ int otx2_cptlf_register_interrupts(struct otx2_cptlfs_info *lfs)
otx2_cptlf_unregister_interrupts(lfs);
return ret;
}
+EXPORT_SYMBOL_NS_GPL(otx2_cptlf_register_interrupts, CRYPTO_DEV_OCTEONTX2_CPT);
void otx2_cptlf_free_irqs_affinity(struct otx2_cptlfs_info *lfs)
{
@@ -334,6 +337,7 @@ void otx2_cptlf_free_irqs_affinity(struct otx2_cptlfs_info *lfs)
free_cpumask_var(lfs->lf[slot].affinity_mask);
}
}
+EXPORT_SYMBOL_NS_GPL(otx2_cptlf_free_irqs_affinity, CRYPTO_DEV_OCTEONTX2_CPT);
int otx2_cptlf_set_irqs_affinity(struct otx2_cptlfs_info *lfs)
{
@@ -366,6 +370,7 @@ int otx2_cptlf_set_irqs_affinity(struct otx2_cptlfs_info *lfs)
otx2_cptlf_free_irqs_affinity(lfs);
return ret;
}
+EXPORT_SYMBOL_NS_GPL(otx2_cptlf_set_irqs_affinity, CRYPTO_DEV_OCTEONTX2_CPT);
int otx2_cptlf_init(struct otx2_cptlfs_info *lfs, u8 eng_grp_mask, int pri,
int lfs_num)
@@ -422,6 +427,7 @@ int otx2_cptlf_init(struct otx2_cptlfs_info *lfs, u8 eng_grp_mask, int pri,
lfs->lfs_num = 0;
return ret;
}
+EXPORT_SYMBOL_NS_GPL(otx2_cptlf_init, CRYPTO_DEV_OCTEONTX2_CPT);
void otx2_cptlf_shutdown(struct otx2_cptlfs_info *lfs)
{
@@ -431,3 +437,8 @@ void otx2_cptlf_shutdown(struct otx2_cptlfs_info *lfs)
/* Send request to detach LFs */
otx2_cpt_detach_rsrcs_msg(lfs);
}
+EXPORT_SYMBOL_NS_GPL(otx2_cptlf_shutdown, CRYPTO_DEV_OCTEONTX2_CPT);
+
+MODULE_AUTHOR("Marvell");
+MODULE_DESCRIPTION("Marvell RVU CPT Common module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c b/drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c
index a402ccfac5577..ddf6e913c1c45 100644
--- a/drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c
+++ b/drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c
@@ -831,6 +831,8 @@ static struct pci_driver otx2_cpt_pci_driver = {
module_pci_driver(otx2_cpt_pci_driver);
+MODULE_IMPORT_NS(CRYPTO_DEV_OCTEONTX2_CPT);
+
MODULE_AUTHOR("Marvell");
MODULE_DESCRIPTION(OTX2_CPT_DRV_STRING);
MODULE_LICENSE("GPL v2");
diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptvf_main.c b/drivers/crypto/marvell/octeontx2/otx2_cptvf_main.c
index 3411e664cf50c..392e9fee05e81 100644
--- a/drivers/crypto/marvell/octeontx2/otx2_cptvf_main.c
+++ b/drivers/crypto/marvell/octeontx2/otx2_cptvf_main.c
@@ -429,6 +429,8 @@ static struct pci_driver otx2_cptvf_pci_driver = {
module_pci_driver(otx2_cptvf_pci_driver);
+MODULE_IMPORT_NS(CRYPTO_DEV_OCTEONTX2_CPT);
+
MODULE_AUTHOR("Marvell");
MODULE_DESCRIPTION("Marvell RVU CPT Virtual Function Driver");
MODULE_LICENSE("GPL v2");
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 234/885] crypto: crypto4xx - Call dma_unmap_page when done
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (232 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 233/885] crypto: octeontx2 - Fix objects shared between several modules Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 235/885] wifi: mac80211: move color collision detection report in a delayed work Greg Kroah-Hartman
` (653 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Herbert Xu, Christian Lamparter,
Sasha Levin
From: Herbert Xu <herbert@gondor.apana.org.au>
[ Upstream commit bcdda4301bdc4955d45f7e1ffefb6207967b067e ]
In crypto4xx_cipher_done, we should be unmapping the dst page, not
mapping it.
This was flagged by a sparse warning about the unused addr variable.
While we're at it, also fix a sparse warning regarding the unused
ctx variable in crypto4xx_ahash_done (by actually using it).
Fixes: 049359d65527 ("crypto: amcc - Add crypt4xx driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/amcc/crypto4xx_core.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/crypto/amcc/crypto4xx_core.c b/drivers/crypto/amcc/crypto4xx_core.c
index 280f4b0e71334..50dc783821b69 100644
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
@@ -522,7 +522,6 @@ static void crypto4xx_cipher_done(struct crypto4xx_device *dev,
{
struct skcipher_request *req;
struct scatterlist *dst;
- dma_addr_t addr;
req = skcipher_request_cast(pd_uinfo->async_req);
@@ -531,8 +530,8 @@ static void crypto4xx_cipher_done(struct crypto4xx_device *dev,
req->cryptlen, req->dst);
} else {
dst = pd_uinfo->dest_va;
- addr = dma_map_page(dev->core_dev->device, sg_page(dst),
- dst->offset, dst->length, DMA_FROM_DEVICE);
+ dma_unmap_page(dev->core_dev->device, pd->dest, dst->length,
+ DMA_FROM_DEVICE);
}
if (pd_uinfo->sa_va->sa_command_0.bf.save_iv == SA_SAVE_IV) {
@@ -557,10 +556,9 @@ static void crypto4xx_ahash_done(struct crypto4xx_device *dev,
struct ahash_request *ahash_req;
ahash_req = ahash_request_cast(pd_uinfo->async_req);
- ctx = crypto_tfm_ctx(ahash_req->base.tfm);
+ ctx = crypto_ahash_ctx(crypto_ahash_reqtfm(ahash_req));
- crypto4xx_copy_digest_to_dst(ahash_req->result, pd_uinfo,
- crypto_tfm_ctx(ahash_req->base.tfm));
+ crypto4xx_copy_digest_to_dst(ahash_req->result, pd_uinfo, ctx);
crypto4xx_ret_sg_desc(dev, pd_uinfo);
if (pd_uinfo->state & PD_ENTRY_BUSY)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 235/885] wifi: mac80211: move color collision detection report in a delayed work
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (233 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 234/885] crypto: crypto4xx - Call dma_unmap_page when done Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 236/885] wifi: mac80211: make rate u32 in sta_set_rate_info_rx() Greg Kroah-Hartman
` (652 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nicolas Cavallari, Lorenzo Bianconi,
Johannes Berg, Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 9288188438d85e22c23cfd6657ee8a801babc83c ]
Move color collision report in a dedicated delayed work and do not run
it in interrupt context in order to rate-limit the number of events
reported to userspace. Moreover grab wdev mutex in
ieee80211_color_collision_detection_work routine since it is required
by cfg80211_obss_color_collision_notify().
Tested-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Fixes: 5f9404abdf2a ("mac80211: add support for BSS color change")
Link: https://lore.kernel.org/r/3f6cf60c892ad40c1cca4a55d62b1224ef1c6ce9.1674644379.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mac80211/cfg.c | 26 +++++++++++++++++++++++++-
net/mac80211/ieee80211_i.h | 3 +++
net/mac80211/link.c | 3 +++
3 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 3c66e03774fbe..e8beec0a0ae1c 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -4623,6 +4623,20 @@ void ieee80211_color_change_finalize_work(struct work_struct *work)
sdata_unlock(sdata);
}
+void ieee80211_color_collision_detection_work(struct work_struct *work)
+{
+ struct delayed_work *delayed_work = to_delayed_work(work);
+ struct ieee80211_link_data *link =
+ container_of(delayed_work, struct ieee80211_link_data,
+ color_collision_detect_work);
+ struct ieee80211_sub_if_data *sdata = link->sdata;
+
+ sdata_lock(sdata);
+ cfg80211_obss_color_collision_notify(sdata->dev, link->color_bitmap,
+ GFP_KERNEL);
+ sdata_unlock(sdata);
+}
+
void ieee80211_color_change_finish(struct ieee80211_vif *vif)
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
@@ -4637,11 +4651,21 @@ ieeee80211_obss_color_collision_notify(struct ieee80211_vif *vif,
u64 color_bitmap, gfp_t gfp)
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+ struct ieee80211_link_data *link = &sdata->deflink;
if (sdata->vif.bss_conf.color_change_active || sdata->vif.bss_conf.csa_active)
return;
- cfg80211_obss_color_collision_notify(sdata->dev, color_bitmap, gfp);
+ if (delayed_work_pending(&link->color_collision_detect_work))
+ return;
+
+ link->color_bitmap = color_bitmap;
+ /* queue the color collision detection event every 500 ms in order to
+ * avoid sending too much netlink messages to userspace.
+ */
+ ieee80211_queue_delayed_work(&sdata->local->hw,
+ &link->color_collision_detect_work,
+ msecs_to_jiffies(500));
}
EXPORT_SYMBOL_GPL(ieeee80211_obss_color_collision_notify);
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index a8862f2c64ec0..e57001e00a3d0 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -972,6 +972,8 @@ struct ieee80211_link_data {
struct cfg80211_chan_def csa_chandef;
struct work_struct color_change_finalize_work;
+ struct delayed_work color_collision_detect_work;
+ u64 color_bitmap;
/* context reservation -- protected with chanctx_mtx */
struct ieee80211_chanctx *reserved_chanctx;
@@ -1916,6 +1918,7 @@ int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
/* color change handling */
void ieee80211_color_change_finalize_work(struct work_struct *work);
+void ieee80211_color_collision_detection_work(struct work_struct *work);
/* interface handling */
#define MAC80211_SUPPORTED_FEATURES_TX (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | \
diff --git a/net/mac80211/link.c b/net/mac80211/link.c
index e309708abae8b..a1b3031fefce2 100644
--- a/net/mac80211/link.c
+++ b/net/mac80211/link.c
@@ -39,6 +39,8 @@ void ieee80211_link_init(struct ieee80211_sub_if_data *sdata,
ieee80211_csa_finalize_work);
INIT_WORK(&link->color_change_finalize_work,
ieee80211_color_change_finalize_work);
+ INIT_DELAYED_WORK(&link->color_collision_detect_work,
+ ieee80211_color_collision_detection_work);
INIT_LIST_HEAD(&link->assigned_chanctx_list);
INIT_LIST_HEAD(&link->reserved_chanctx_list);
INIT_DELAYED_WORK(&link->dfs_cac_timer_work,
@@ -66,6 +68,7 @@ void ieee80211_link_stop(struct ieee80211_link_data *link)
if (link->sdata->vif.type == NL80211_IFTYPE_STATION)
ieee80211_mgd_stop_link(link);
+ cancel_delayed_work_sync(&link->color_collision_detect_work);
ieee80211_link_release_channel(link);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 236/885] wifi: mac80211: make rate u32 in sta_set_rate_info_rx()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (234 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 235/885] wifi: mac80211: move color collision detection report in a delayed work Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 237/885] wifi: mac80211: fix non-MLO station association Greg Kroah-Hartman
` (651 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shayne Chen, Johannes Berg, Sasha Levin
From: Shayne Chen <shayne.chen@mediatek.com>
[ Upstream commit 59336e07b287d91dc4ec265e07724e8f7e3d0209 ]
The value of last_rate in ieee80211_sta_rx_stats is degraded from u32 to
u16 after being assigned to rate variable, which causes information loss
in STA_STATS_FIELD_TYPE and later bitfields.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230209110659.25447-1-shayne.chen@mediatek.com
Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mac80211/sta_info.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index cebfd148bb406..3603cbc167570 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -2380,7 +2380,7 @@ static void sta_stats_decode_rate(struct ieee80211_local *local, u32 rate,
static int sta_set_rate_info_rx(struct sta_info *sta, struct rate_info *rinfo)
{
- u16 rate = READ_ONCE(sta_get_last_rx_stats(sta)->last_rate);
+ u32 rate = READ_ONCE(sta_get_last_rx_stats(sta)->last_rate);
if (rate == STA_STATS_RATE_INVALID)
return -EINVAL;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 237/885] wifi: mac80211: fix non-MLO station association
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (235 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 236/885] wifi: mac80211: make rate u32 in sta_set_rate_info_rx() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 238/885] wifi: mac80211: Dont translate MLD addresses for multicast Greg Kroah-Hartman
` (650 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Karthikeyan Periyasamy,
Johannes Berg, Sasha Levin
From: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
[ Upstream commit aaacf1740f2f95e0c5449ff3bbcff252d69cf952 ]
Non-MLO station frames are dropped in Rx path due to the condition
check in ieee80211_rx_is_valid_sta_link_id(). In multi-link AP scenario,
non-MLO stations try to connect in any of the valid links in the ML AP,
where the station valid_links and link_id params are valid in the
ieee80211_sta object. But ieee80211_rx_is_valid_sta_link_id() always
return false for the non-MLO stations by the assumption taken is
valid_links and link_id are not valid in non-MLO stations object
(ieee80211_sta), this assumption is wrong. Due to this assumption,
non-MLO station frames are dropped which leads to failure in association.
Fix it by removing the condition check and allow the link validation
check for the non-MLO stations.
Fixes: e66b7920aa5a ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://lore.kernel.org/r/20230206160330.1613-1-quic_periyasa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mac80211/rx.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 8f0d7c666df7e..f9604dc182a87 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -4073,9 +4073,6 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx)
static bool
ieee80211_rx_is_valid_sta_link_id(struct ieee80211_sta *sta, u8 link_id)
{
- if (!sta->mlo)
- return false;
-
return !!(sta->valid_links & BIT(link_id));
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 238/885] wifi: mac80211: Dont translate MLD addresses for multicast
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (236 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 237/885] wifi: mac80211: fix non-MLO station association Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 239/885] wifi: mac80211: avoid u32_encode_bits() warning Greg Kroah-Hartman
` (649 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrei Otcheretianski,
Johannes Berg, Sasha Levin
From: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
[ Upstream commit daf8fb4295dccc032515cdc1bd3873370063542b ]
MLD address translation should be done only for individually addressed
frames. Otherwise, AAD calculation would be wrong and the decryption
would fail.
Fixes: e66b7920aa5ac ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Link: https://lore.kernel.org/r/20230214101048.792414-1-andrei.otcheretianski@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mac80211/rx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index f9604dc182a87..08e01bddc9fb2 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -4861,7 +4861,8 @@ static bool ieee80211_prepare_and_rx_handle(struct ieee80211_rx_data *rx,
hdr = (struct ieee80211_hdr *)rx->skb->data;
}
- if (unlikely(rx->sta && rx->sta->sta.mlo)) {
+ if (unlikely(rx->sta && rx->sta->sta.mlo) &&
+ is_unicast_ether_addr(hdr->addr1)) {
/* translate to MLD addresses */
if (ether_addr_equal(link->conf->addr, hdr->addr1))
ether_addr_copy(hdr->addr1, rx->sdata->vif.addr);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 239/885] wifi: mac80211: avoid u32_encode_bits() warning
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (237 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 238/885] wifi: mac80211: Dont translate MLD addresses for multicast Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 240/885] wifi: mac80211: fix off-by-one link setting Greg Kroah-Hartman
` (648 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Johannes Berg, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 1d8d4af4347420d657be448f8be4c39c558f3b5d ]
gcc-9 triggers a false-postive warning in ieee80211_mlo_multicast_tx()
for u32_encode_bits(ffs(links) - 1, ...), since ffs() can return zero
on an empty bitmask, and the negative argument to u32_encode_bits()
is then out of range:
In file included from include/linux/ieee80211.h:21,
from include/net/cfg80211.h:23,
from net/mac80211/tx.c:23:
In function 'u32_encode_bits',
inlined from 'ieee80211_mlo_multicast_tx' at net/mac80211/tx.c:4437:17,
inlined from 'ieee80211_subif_start_xmit' at net/mac80211/tx.c:4485:3:
include/linux/bitfield.h:177:3: error: call to '__field_overflow' declared with attribute error: value doesn't fit into mask
177 | __field_overflow(); \
| ^~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:197:2: note: in expansion of macro '____MAKE_OP'
197 | ____MAKE_OP(u##size,u##size,,)
| ^~~~~~~~~~~
include/linux/bitfield.h:200:1: note: in expansion of macro '__MAKE_OP'
200 | __MAKE_OP(32)
| ^~~~~~~~~
Newer compiler versions do not cause problems with the zero argument
because they do not consider this a __builtin_constant_p().
It's also harmless since the hweight16() check already guarantees
that this cannot be 0.
Replace the ffs() with an equivalent find_first_bit() check that
matches the later for_each_set_bit() style and avoids the warning.
Fixes: 963d0e8d08d9 ("wifi: mac80211: optionally implement MLO multicast TX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230214132025.1532147-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mac80211/tx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 6409097a56c7a..55220e764de68 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -4395,7 +4395,7 @@ static void ieee80211_mlo_multicast_tx(struct net_device *dev,
u32 ctrl_flags = IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX;
if (hweight16(links) == 1) {
- ctrl_flags |= u32_encode_bits(ffs(links) - 1,
+ ctrl_flags |= u32_encode_bits(find_first_bit(&links, 16) - 1,
IEEE80211_TX_CTRL_MLO_LINK);
__ieee80211_subif_start_xmit(skb, sdata->dev, 0, ctrl_flags,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 240/885] wifi: mac80211: fix off-by-one link setting
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (238 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 239/885] wifi: mac80211: avoid u32_encode_bits() warning Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 241/885] tools/lib/thermal: Fix thermal_sampling_exit() Greg Kroah-Hartman
` (647 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexander Lobakin, Johannes Berg,
Sasha Levin
From: Johannes Berg <johannes.berg@intel.com>
[ Upstream commit cf08e29db760b144bde51e2444f3430c75763e26 ]
The convention for find_first_bit() is 0-based, while ffs()
is 1-based, so this is now off-by-one. I cannot reproduce the
gcc-9 problem, but since the -1 is now removed, I'm hoping it
will still avoid the original issue.
Reported-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Fixes: 1d8d4af43474 ("wifi: mac80211: avoid u32_encode_bits() warning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mac80211/tx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 55220e764de68..6a1708db652f2 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -4395,7 +4395,7 @@ static void ieee80211_mlo_multicast_tx(struct net_device *dev,
u32 ctrl_flags = IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX;
if (hweight16(links) == 1) {
- ctrl_flags |= u32_encode_bits(find_first_bit(&links, 16) - 1,
+ ctrl_flags |= u32_encode_bits(__ffs(links),
IEEE80211_TX_CTRL_MLO_LINK);
__ieee80211_subif_start_xmit(skb, sdata->dev, 0, ctrl_flags,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 241/885] tools/lib/thermal: Fix thermal_sampling_exit()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (239 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 240/885] wifi: mac80211: fix off-by-one link setting Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 242/885] thermal/drivers/hisi: Drop second sensor hi3660 Greg Kroah-Hartman
` (646 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vincent Guittot, Daniel Lezcano,
Rafael J. Wysocki, Sasha Levin
From: Vincent Guittot <vincent.guittot@linaro.org>
[ Upstream commit a29cbd76aaf63f5493e962aa2fbaadcdc4615143 ]
thermal_sampling_init() suscribes to THERMAL_GENL_SAMPLING_GROUP_NAME group
so thermal_sampling_exit() should unsubscribe from the same group.
Fixes: 47c4b0de080a ("tools/lib/thermal: Add a thermal library")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230202102812.453357-1-vincent.guittot@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/thermal/sampling.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/thermal/sampling.c b/tools/lib/thermal/sampling.c
index ee818f4e9654d..70577423a9f0c 100644
--- a/tools/lib/thermal/sampling.c
+++ b/tools/lib/thermal/sampling.c
@@ -54,7 +54,7 @@ int thermal_sampling_fd(struct thermal_handler *th)
thermal_error_t thermal_sampling_exit(struct thermal_handler *th)
{
if (nl_unsubscribe_thermal(th->sk_sampling, th->cb_sampling,
- THERMAL_GENL_EVENT_GROUP_NAME))
+ THERMAL_GENL_SAMPLING_GROUP_NAME))
return THERMAL_ERROR;
nl_thermal_disconnect(th->sk_sampling, th->cb_sampling);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 242/885] thermal/drivers/hisi: Drop second sensor hi3660
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (240 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 241/885] tools/lib/thermal: Fix thermal_sampling_exit() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 243/885] selftests/bpf: Fix map_kptr test Greg Kroah-Hartman
` (645 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yongqin Liu, Daniel Lezcano,
Rafael J. Wysocki, Sasha Levin
From: Yongqin Liu <yongqin.liu@linaro.org>
[ Upstream commit 15cc25829a97c3957e520e971868aacc84341317 ]
The commit 74c8e6bffbe1 ("driver core: Add __alloc_size hint to devm
allocators") exposes a panic "BRK handler: Fatal exception" on the
hi3660_thermal_probe funciton.
This is because the function allocates memory for only one
sensors array entry, but tries to fill up a second one.
Fix this by removing the unneeded second access.
Fixes: 7d3a2a2bbadb ("thermal/drivers/hisi: Fix number of sensors on hi3660")
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
Link: https://lore.kernel.org/linux-mm/20221101223321.1326815-5-keescook@chromium.org/
Link: https://lore.kernel.org/r/20230210141507.71014-1-yongqin.liu@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/hisi_thermal.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index d6974db7aaf76..15af90f5c7d91 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -427,10 +427,6 @@ static int hi3660_thermal_probe(struct hisi_thermal_data *data)
data->sensor[0].irq_name = "tsensor_a73";
data->sensor[0].data = data;
- data->sensor[1].id = HI3660_LITTLE_SENSOR;
- data->sensor[1].irq_name = "tsensor_a53";
- data->sensor[1].data = data;
-
return 0;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 243/885] selftests/bpf: Fix map_kptr test.
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (241 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 242/885] thermal/drivers/hisi: Drop second sensor hi3660 Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 244/885] wifi: mac80211: pass sta to ieee80211_rx_data_set_sta() Greg Kroah-Hartman
` (644 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexei Starovoitov,
Stanislav Fomichev, Kumar Kartikeya Dwivedi, Martin KaFai Lau,
Sasha Levin
From: Alexei Starovoitov <ast@kernel.org>
[ Upstream commit 62d101d5f422cde39b269f7eb4cbbe2f1e26f9d4 ]
The compiler is optimizing out majority of unref_ptr read/writes, so the test
wasn't testing much. For example, one could delete '__kptr' tag from
'struct prog_test_ref_kfunc __kptr *unref_ptr;' and the test would still "pass".
Convert it to volatile stores. Confirmed by comparing bpf asm before/after.
Fixes: 2cbc469a6fc3 ("selftests/bpf: Add C tests for kptr")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230214235051.22938-1-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/progs/map_kptr.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/bpf/progs/map_kptr.c b/tools/testing/selftests/bpf/progs/map_kptr.c
index eb82178034934..228ec45365a8d 100644
--- a/tools/testing/selftests/bpf/progs/map_kptr.c
+++ b/tools/testing/selftests/bpf/progs/map_kptr.c
@@ -62,21 +62,23 @@ extern struct prog_test_ref_kfunc *
bpf_kfunc_call_test_kptr_get(struct prog_test_ref_kfunc **p, int a, int b) __ksym;
extern void bpf_kfunc_call_test_release(struct prog_test_ref_kfunc *p) __ksym;
+#define WRITE_ONCE(x, val) ((*(volatile typeof(x) *) &(x)) = (val))
+
static void test_kptr_unref(struct map_value *v)
{
struct prog_test_ref_kfunc *p;
p = v->unref_ptr;
/* store untrusted_ptr_or_null_ */
- v->unref_ptr = p;
+ WRITE_ONCE(v->unref_ptr, p);
if (!p)
return;
if (p->a + p->b > 100)
return;
/* store untrusted_ptr_ */
- v->unref_ptr = p;
+ WRITE_ONCE(v->unref_ptr, p);
/* store NULL */
- v->unref_ptr = NULL;
+ WRITE_ONCE(v->unref_ptr, NULL);
}
static void test_kptr_ref(struct map_value *v)
@@ -85,7 +87,7 @@ static void test_kptr_ref(struct map_value *v)
p = v->ref_ptr;
/* store ptr_or_null_ */
- v->unref_ptr = p;
+ WRITE_ONCE(v->unref_ptr, p);
if (!p)
return;
if (p->a + p->b > 100)
@@ -99,7 +101,7 @@ static void test_kptr_ref(struct map_value *v)
return;
}
/* store ptr_ */
- v->unref_ptr = p;
+ WRITE_ONCE(v->unref_ptr, p);
bpf_kfunc_call_test_release(p);
p = bpf_kfunc_call_test_acquire(&(unsigned long){0});
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 244/885] wifi: mac80211: pass sta to ieee80211_rx_data_set_sta()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (242 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 243/885] selftests/bpf: Fix map_kptr test Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 245/885] bpf: Zeroing allocated object from slab in bpf memory allocator Greg Kroah-Hartman
` (643 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Johannes Berg, Sasha Levin
From: Johannes Berg <johannes.berg@intel.com>
[ Upstream commit 0d846bdc11101ac0ba4d89c2be359af08cb9379b ]
There's at least one case in ieee80211_rx_for_interface()
where we might pass &((struct sta_info *)NULL)->sta to it
only to then do container_of(), and then checking the
result for NULL, but checking the result of container_of()
for NULL looks really odd.
Fix this by just passing the struct sta_info * instead.
Fixes: e66b7920aa5a ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mac80211/rx.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 08e01bddc9fb2..44e407e1a14c7 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -4094,13 +4094,8 @@ static bool ieee80211_rx_data_set_link(struct ieee80211_rx_data *rx,
}
static bool ieee80211_rx_data_set_sta(struct ieee80211_rx_data *rx,
- struct ieee80211_sta *pubsta,
- int link_id)
+ struct sta_info *sta, int link_id)
{
- struct sta_info *sta;
-
- sta = container_of(pubsta, struct sta_info, sta);
-
rx->link_id = link_id;
rx->sta = sta;
@@ -4138,7 +4133,7 @@ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid)
if (sta->sta.valid_links)
link_id = ffs(sta->sta.valid_links) - 1;
- if (!ieee80211_rx_data_set_sta(&rx, &sta->sta, link_id))
+ if (!ieee80211_rx_data_set_sta(&rx, sta, link_id))
return;
tid_agg_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[tid]);
@@ -4184,7 +4179,7 @@ void ieee80211_mark_rx_ba_filtered_frames(struct ieee80211_sta *pubsta, u8 tid,
sta = container_of(pubsta, struct sta_info, sta);
- if (!ieee80211_rx_data_set_sta(&rx, pubsta, -1))
+ if (!ieee80211_rx_data_set_sta(&rx, sta, -1))
return;
rcu_read_lock();
@@ -4892,6 +4887,7 @@ static void __ieee80211_rx_handle_8023(struct ieee80211_hw *hw,
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_fast_rx *fast_rx;
struct ieee80211_rx_data rx;
+ struct sta_info *sta;
int link_id = -1;
memset(&rx, 0, sizeof(rx));
@@ -4919,7 +4915,8 @@ static void __ieee80211_rx_handle_8023(struct ieee80211_hw *hw,
* link_id is used only for stats purpose and updating the stats on
* the deflink is fine?
*/
- if (!ieee80211_rx_data_set_sta(&rx, pubsta, link_id))
+ sta = container_of(pubsta, struct sta_info, sta);
+ if (!ieee80211_rx_data_set_sta(&rx, sta, link_id))
goto drop;
fast_rx = rcu_dereference(rx.sta->fast_rx);
@@ -4959,7 +4956,7 @@ static bool ieee80211_rx_for_interface(struct ieee80211_rx_data *rx,
link_id = status->link_id;
}
- if (!ieee80211_rx_data_set_sta(rx, &sta->sta, link_id))
+ if (!ieee80211_rx_data_set_sta(rx, sta, link_id))
return false;
return ieee80211_prepare_and_rx_handle(rx, skb, consume);
@@ -5026,7 +5023,8 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
link_id = status->link_id;
if (pubsta) {
- if (!ieee80211_rx_data_set_sta(&rx, pubsta, link_id))
+ sta = container_of(pubsta, struct sta_info, sta);
+ if (!ieee80211_rx_data_set_sta(&rx, sta, link_id))
goto out;
/*
@@ -5063,8 +5061,7 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
}
rx.sdata = prev_sta->sdata;
- if (!ieee80211_rx_data_set_sta(&rx, &prev_sta->sta,
- link_id))
+ if (!ieee80211_rx_data_set_sta(&rx, prev_sta, link_id))
goto out;
if (!status->link_valid && prev_sta->sta.mlo)
@@ -5077,8 +5074,7 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
if (prev_sta) {
rx.sdata = prev_sta->sdata;
- if (!ieee80211_rx_data_set_sta(&rx, &prev_sta->sta,
- link_id))
+ if (!ieee80211_rx_data_set_sta(&rx, prev_sta, link_id))
goto out;
if (!status->link_valid && prev_sta->sta.mlo)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 245/885] bpf: Zeroing allocated object from slab in bpf memory allocator
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (243 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 244/885] wifi: mac80211: pass sta to ieee80211_rx_data_set_sta() Greg Kroah-Hartman
@ 2023-03-07 16:52 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 246/885] selftests/bpf: Fix xdp_do_redirect on s390x Greg Kroah-Hartman
` (642 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:52 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hou Tao, Alexei Starovoitov, Sasha Levin
From: Hou Tao <houtao1@huawei.com>
[ Upstream commit 997849c4b969034e225153f41026657def66d286 ]
Currently the freed element in bpf memory allocator may be immediately
reused, for htab map the reuse will reinitialize special fields in map
value (e.g., bpf_spin_lock), but lookup procedure may still access
these special fields, and it may lead to hard-lockup as shown below:
NMI backtrace for cpu 16
CPU: 16 PID: 2574 Comm: htab.bin Tainted: G L 6.1.0+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
RIP: 0010:queued_spin_lock_slowpath+0x283/0x2c0
......
Call Trace:
<TASK>
copy_map_value_locked+0xb7/0x170
bpf_map_copy_value+0x113/0x3c0
__sys_bpf+0x1c67/0x2780
__x64_sys_bpf+0x1c/0x20
do_syscall_64+0x30/0x60
entry_SYSCALL_64_after_hwframe+0x46/0xb0
......
</TASK>
For htab map, just like the preallocated case, these is no need to
initialize these special fields in map value again once these fields
have been initialized. For preallocated htab map, these fields are
initialized through __GFP_ZERO in bpf_map_area_alloc(), so do the
similar thing for non-preallocated htab in bpf memory allocator. And
there is no need to use __GFP_ZERO for per-cpu bpf memory allocator,
because __alloc_percpu_gfp() does it implicitly.
Fixes: 0fd7c5d43339 ("bpf: Optimize call_rcu in non-preallocated hash map.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230215082132.3856544-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/bpf.h | 7 +++++++
kernel/bpf/hashtab.c | 4 ++--
kernel/bpf/memalloc.c | 2 +-
3 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index c1bd1bd105067..942f9ac9fa7b6 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -266,6 +266,13 @@ static inline bool map_value_has_kptrs(const struct bpf_map *map)
return !IS_ERR_OR_NULL(map->kptr_off_tab);
}
+/* 'dst' must be a temporary buffer and should not point to memory that is being
+ * used in parallel by a bpf program or bpf syscall, otherwise the access from
+ * the bpf program or bpf syscall may be corrupted by the reinitialization,
+ * leading to weird problems. Even 'dst' is newly-allocated from bpf memory
+ * allocator, it is still possible for 'dst' to be used in parallel by a bpf
+ * program or bpf syscall.
+ */
static inline void check_and_init_map_value(struct bpf_map *map, void *dst)
{
if (unlikely(map_value_has_spin_lock(map)))
diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
index c4811984fafa4..4a3d0a7447026 100644
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -1010,8 +1010,6 @@ static struct htab_elem *alloc_htab_elem(struct bpf_htab *htab, void *key,
l_new = ERR_PTR(-ENOMEM);
goto dec_count;
}
- check_and_init_map_value(&htab->map,
- l_new->key + round_up(key_size, 8));
}
memcpy(l_new->key, key, key_size);
@@ -1603,6 +1601,7 @@ static int __htab_map_lookup_and_delete_elem(struct bpf_map *map, void *key,
else
copy_map_value(map, value, l->key +
roundup_key_size);
+ /* Zeroing special fields in the temp buffer */
check_and_init_map_value(map, value);
}
@@ -1803,6 +1802,7 @@ __htab_map_lookup_and_delete_batch(struct bpf_map *map,
true);
else
copy_map_value(map, dst_val, value);
+ /* Zeroing special fields in the temp buffer */
check_and_init_map_value(map, dst_val);
}
if (do_delete) {
diff --git a/kernel/bpf/memalloc.c b/kernel/bpf/memalloc.c
index 6187c28d266f0..ace303a220ae8 100644
--- a/kernel/bpf/memalloc.c
+++ b/kernel/bpf/memalloc.c
@@ -143,7 +143,7 @@ static void *__alloc(struct bpf_mem_cache *c, int node)
return obj;
}
- return kmalloc_node(c->unit_size, flags, node);
+ return kmalloc_node(c->unit_size, flags | __GFP_ZERO, node);
}
static struct mem_cgroup *get_memcg(const struct bpf_mem_cache *c)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 246/885] selftests/bpf: Fix xdp_do_redirect on s390x
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (244 preceding siblings ...)
2023-03-07 16:52 ` [PATCH 6.1 245/885] bpf: Zeroing allocated object from slab in bpf memory allocator Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 247/885] can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error Greg Kroah-Hartman
` (641 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ilya Leoshkevich,
Alexei Starovoitov, Sasha Levin
From: Ilya Leoshkevich <iii@linux.ibm.com>
[ Upstream commit 06c1865b0b0c7820ea53af2394dd7aff31100295 ]
s390x cache line size is 256 bytes, so skb_shared_info must be aligned
on a much larger boundary than for x86. This makes the maximum packet
size smaller.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-11-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 6c20822fada1 ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/prog_tests/xdp_do_redirect.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/testing/selftests/bpf/prog_tests/xdp_do_redirect.c b/tools/testing/selftests/bpf/prog_tests/xdp_do_redirect.c
index 9ac6f6a268db2..15ad336691613 100644
--- a/tools/testing/selftests/bpf/prog_tests/xdp_do_redirect.c
+++ b/tools/testing/selftests/bpf/prog_tests/xdp_do_redirect.c
@@ -65,7 +65,11 @@ static int attach_tc_prog(struct bpf_tc_hook *hook, int fd)
/* The maximum permissible size is: PAGE_SIZE - sizeof(struct xdp_page_head) -
* sizeof(struct skb_shared_info) - XDP_PACKET_HEADROOM = 3368 bytes
*/
+#if defined(__s390x__)
+#define MAX_PKT_SIZE 3176
+#else
#define MAX_PKT_SIZE 3368
+#endif
static void test_max_pkt_size(int fd)
{
char data[MAX_PKT_SIZE + 1] = {};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 247/885] can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (245 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 246/885] selftests/bpf: Fix xdp_do_redirect on s390x Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 248/885] can: esd_usb: Make use of can_change_state() and relocate checking skb for NULL Greg Kroah-Hartman
` (640 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Frank Jungclaus, Marc Kleine-Budde,
Sasha Levin
From: Frank Jungclaus <frank.jungclaus@esd.eu>
[ Upstream commit 118469f88180438ef43dee93d71f77c00e7b425d ]
Move the supply for cf->data[3] (bit stream position of CAN error), in
case of a bus- or protocol-error, outside of the "switch (ecc &
SJA1000_ECC_MASK){}"-statement, because this bit stream position is
independent of the error type.
Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: https://lore.kernel.org/all/20230216190450.3901254-2-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/usb/esd_usb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
index 42323f5e6f3a0..5e182fadd875e 100644
--- a/drivers/net/can/usb/esd_usb.c
+++ b/drivers/net/can/usb/esd_usb.c
@@ -286,7 +286,6 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
cf->data[2] |= CAN_ERR_PROT_STUFF;
break;
default:
- cf->data[3] = ecc & SJA1000_ECC_SEG;
break;
}
@@ -294,6 +293,9 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
if (!(ecc & SJA1000_ECC_DIR))
cf->data[2] |= CAN_ERR_PROT_TX;
+ /* Bit stream position in CAN frame as the error was detected */
+ cf->data[3] = ecc & SJA1000_ECC_SEG;
+
if (priv->can.state == CAN_STATE_ERROR_WARNING ||
priv->can.state == CAN_STATE_ERROR_PASSIVE) {
cf->data[1] = (txerr > rxerr) ?
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 248/885] can: esd_usb: Make use of can_change_state() and relocate checking skb for NULL
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (246 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 247/885] can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 249/885] xsk: check IFF_UP earlier in Tx path Greg Kroah-Hartman
` (639 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Frank Jungclaus, Marc Kleine-Budde,
Sasha Levin
From: Frank Jungclaus <frank.jungclaus@esd.eu>
[ Upstream commit 9684b000a86299b5968fef8ffbf1484def37452a ]
Start a rework initiated by Vincents remarks "You should not report
the greatest of txerr and rxerr but the one which actually increased."
[1] and "As far as I understand, those flags should be set only when
the threshold is reached" [2] .
Therefore make use of can_change_state() to (among others) set the
flags CAN_ERR_CRTL_[RT]X_WARNING and CAN_ERR_CRTL_[RT]X_PASSIVE,
maintain CAN statistic counters for error_warning, error_passive and
bus_off.
Relocate testing alloc_can_err_skb() for NULL to the end of
esd_usb_rx_event(), to have things like can_bus_off(),
can_change_state() working even in out of memory conditions.
Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: [1] https://lore.kernel.org/all/CAMZ6RqKGBWe15aMkf8-QLf-cOQg99GQBebSm+1wEzTqHgvmNuw@mail.gmail.com/
Link: [2] https://lore.kernel.org/all/CAMZ6Rq+QBO1yTX_o6GV0yhdBj-RzZSRGWDZBS0fs7zbSTy4hmA@mail.gmail.com/
Link: https://lore.kernel.org/all/20230216190450.3901254-3-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/usb/esd_usb.c | 50 +++++++++++++++++------------------
1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
index 5e182fadd875e..578b25f873e58 100644
--- a/drivers/net/can/usb/esd_usb.c
+++ b/drivers/net/can/usb/esd_usb.c
@@ -239,41 +239,42 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
msg->msg.rx.dlc, state, ecc, rxerr, txerr);
skb = alloc_can_err_skb(priv->netdev, &cf);
- if (skb == NULL) {
- stats->rx_dropped++;
- return;
- }
if (state != priv->old_state) {
+ enum can_state tx_state, rx_state;
+ enum can_state new_state = CAN_STATE_ERROR_ACTIVE;
+
priv->old_state = state;
switch (state & ESD_BUSSTATE_MASK) {
case ESD_BUSSTATE_BUSOFF:
- priv->can.state = CAN_STATE_BUS_OFF;
- cf->can_id |= CAN_ERR_BUSOFF;
- priv->can.can_stats.bus_off++;
+ new_state = CAN_STATE_BUS_OFF;
can_bus_off(priv->netdev);
break;
case ESD_BUSSTATE_WARN:
- priv->can.state = CAN_STATE_ERROR_WARNING;
- priv->can.can_stats.error_warning++;
+ new_state = CAN_STATE_ERROR_WARNING;
break;
case ESD_BUSSTATE_ERRPASSIVE:
- priv->can.state = CAN_STATE_ERROR_PASSIVE;
- priv->can.can_stats.error_passive++;
+ new_state = CAN_STATE_ERROR_PASSIVE;
break;
default:
- priv->can.state = CAN_STATE_ERROR_ACTIVE;
+ new_state = CAN_STATE_ERROR_ACTIVE;
txerr = 0;
rxerr = 0;
break;
}
- } else {
+
+ if (new_state != priv->can.state) {
+ tx_state = (txerr >= rxerr) ? new_state : 0;
+ rx_state = (txerr <= rxerr) ? new_state : 0;
+ can_change_state(priv->netdev, cf,
+ tx_state, rx_state);
+ }
+ } else if (skb) {
priv->can.can_stats.bus_error++;
stats->rx_errors++;
- cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR |
- CAN_ERR_CNT;
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
switch (ecc & SJA1000_ECC_MASK) {
case SJA1000_ECC_BIT:
@@ -295,21 +296,20 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
/* Bit stream position in CAN frame as the error was detected */
cf->data[3] = ecc & SJA1000_ECC_SEG;
-
- if (priv->can.state == CAN_STATE_ERROR_WARNING ||
- priv->can.state == CAN_STATE_ERROR_PASSIVE) {
- cf->data[1] = (txerr > rxerr) ?
- CAN_ERR_CRTL_TX_PASSIVE :
- CAN_ERR_CRTL_RX_PASSIVE;
- }
- cf->data[6] = txerr;
- cf->data[7] = rxerr;
}
priv->bec.txerr = txerr;
priv->bec.rxerr = rxerr;
- netif_rx(skb);
+ if (skb) {
+ cf->can_id |= CAN_ERR_CNT;
+ cf->data[6] = txerr;
+ cf->data[7] = rxerr;
+
+ netif_rx(skb);
+ } else {
+ stats->rx_dropped++;
+ }
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 249/885] xsk: check IFF_UP earlier in Tx path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (247 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 248/885] can: esd_usb: Make use of can_change_state() and relocate checking skb for NULL Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 250/885] LoongArch, bpf: Use 4 instructions for function address in JIT Greg Kroah-Hartman
` (638 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Maciej Fijalkowski,
Alexander Lobakin, Martin KaFai Lau, Daniel Borkmann,
Sasha Levin
From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
[ Upstream commit 1596dae2f17ec5c6e8c8f0e3fec78c5ae55c1e0b ]
Xsk Tx can be triggered via either sendmsg() or poll() syscalls. These
two paths share a call to common function xsk_xmit() which has two
sanity checks within. A pseudo code example to show the two paths:
__xsk_sendmsg() : xsk_poll():
if (unlikely(!xsk_is_bound(xs))) if (unlikely(!xsk_is_bound(xs)))
return -ENXIO; return mask;
if (unlikely(need_wait)) (...)
return -EOPNOTSUPP; xsk_xmit()
mark napi id
(...)
xsk_xmit()
xsk_xmit():
if (unlikely(!(xs->dev->flags & IFF_UP)))
return -ENETDOWN;
if (unlikely(!xs->tx))
return -ENOBUFS;
As it can be observed above, in sendmsg() napi id can be marked on
interface that was not brought up and this causes a NULL ptr
dereference:
[31757.505631] BUG: kernel NULL pointer dereference, address: 0000000000000018
[31757.512710] #PF: supervisor read access in kernel mode
[31757.517936] #PF: error_code(0x0000) - not-present page
[31757.523149] PGD 0 P4D 0
[31757.525726] Oops: 0000 [#1] PREEMPT SMP NOPTI
[31757.530154] CPU: 26 PID: 95641 Comm: xdpsock Not tainted 6.2.0-rc5+ #40
[31757.536871] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[31757.547457] RIP: 0010:xsk_sendmsg+0xde/0x180
[31757.551799] Code: 00 75 a2 48 8b 00 a8 04 75 9b 84 d2 74 69 8b 85 14 01 00 00 85 c0 75 1b 48 8b 85 28 03 00 00 48 8b 80 98 00 00 00 48 8b 40 20 <8b> 40 18 89 85 14 01 00 00 8b bd 14 01 00 00 81 ff 00 01 00 00 0f
[31757.570840] RSP: 0018:ffffc90034f27dc0 EFLAGS: 00010246
[31757.576143] RAX: 0000000000000000 RBX: ffffc90034f27e18 RCX: 0000000000000000
[31757.583389] RDX: 0000000000000001 RSI: ffffc90034f27e18 RDI: ffff88984cf3c100
[31757.590631] RBP: ffff88984714a800 R08: ffff88984714a800 R09: 0000000000000000
[31757.597877] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000fffffffa
[31757.605123] R13: 0000000000000000 R14: 0000000000000003 R15: 0000000000000000
[31757.612364] FS: 00007fb4c5931180(0000) GS:ffff88afdfa00000(0000) knlGS:0000000000000000
[31757.620571] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[31757.626406] CR2: 0000000000000018 CR3: 000000184b41c003 CR4: 00000000007706e0
[31757.633648] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[31757.640894] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[31757.648139] PKRU: 55555554
[31757.650894] Call Trace:
[31757.653385] <TASK>
[31757.655524] sock_sendmsg+0x8f/0xa0
[31757.659077] ? sockfd_lookup_light+0x12/0x70
[31757.663416] __sys_sendto+0xfc/0x170
[31757.667051] ? do_sched_setscheduler+0xdb/0x1b0
[31757.671658] __x64_sys_sendto+0x20/0x30
[31757.675557] do_syscall_64+0x38/0x90
[31757.679197] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[31757.687969] Code: 8e f6 ff 44 8b 4c 24 2c 4c 8b 44 24 20 41 89 c4 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 3a 44 89 e7 48 89 44 24 08 e8 b5 8e f6 ff 48
[31757.707007] RSP: 002b:00007ffd49c73c70 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
[31757.714694] RAX: ffffffffffffffda RBX: 000055a996565380 RCX: 00007fb4c5727c16
[31757.721939] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
[31757.729184] RBP: 0000000000000040 R08: 0000000000000000 R09: 0000000000000000
[31757.736429] R10: 0000000000000040 R11: 0000000000000293 R12: 0000000000000000
[31757.743673] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[31757.754940] </TASK>
To fix this, let's make xsk_xmit a function that will be responsible for
generic Tx, where RCU is handled accordingly and pull out sanity checks
and xs->zc handling. Populate sanity checks to __xsk_sendmsg() and
xsk_poll().
Fixes: ca2e1a627035 ("xsk: Mark napi_id on sendmsg()")
Fixes: 18b1ab7aa76b ("xsk: Fix race at socket teardown")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230215143309.13145-1-maciej.fijalkowski@intel.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/xdp/xsk.c | 59 ++++++++++++++++++++++++++++-----------------------
1 file changed, 33 insertions(+), 26 deletions(-)
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index 9f0561b67c12e..13f62d2402e71 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -511,7 +511,7 @@ static struct sk_buff *xsk_build_skb(struct xdp_sock *xs,
return skb;
}
-static int xsk_generic_xmit(struct sock *sk)
+static int __xsk_generic_xmit(struct sock *sk)
{
struct xdp_sock *xs = xdp_sk(sk);
u32 max_batch = TX_BATCH_SIZE;
@@ -594,22 +594,13 @@ static int xsk_generic_xmit(struct sock *sk)
return err;
}
-static int xsk_xmit(struct sock *sk)
+static int xsk_generic_xmit(struct sock *sk)
{
- struct xdp_sock *xs = xdp_sk(sk);
int ret;
- if (unlikely(!(xs->dev->flags & IFF_UP)))
- return -ENETDOWN;
- if (unlikely(!xs->tx))
- return -ENOBUFS;
-
- if (xs->zc)
- return xsk_wakeup(xs, XDP_WAKEUP_TX);
-
/* Drop the RCU lock since the SKB path might sleep. */
rcu_read_unlock();
- ret = xsk_generic_xmit(sk);
+ ret = __xsk_generic_xmit(sk);
/* Reaquire RCU lock before going into common code. */
rcu_read_lock();
@@ -627,17 +618,31 @@ static bool xsk_no_wakeup(struct sock *sk)
#endif
}
+static int xsk_check_common(struct xdp_sock *xs)
+{
+ if (unlikely(!xsk_is_bound(xs)))
+ return -ENXIO;
+ if (unlikely(!(xs->dev->flags & IFF_UP)))
+ return -ENETDOWN;
+
+ return 0;
+}
+
static int __xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)
{
bool need_wait = !(m->msg_flags & MSG_DONTWAIT);
struct sock *sk = sock->sk;
struct xdp_sock *xs = xdp_sk(sk);
struct xsk_buff_pool *pool;
+ int err;
- if (unlikely(!xsk_is_bound(xs)))
- return -ENXIO;
+ err = xsk_check_common(xs);
+ if (err)
+ return err;
if (unlikely(need_wait))
return -EOPNOTSUPP;
+ if (unlikely(!xs->tx))
+ return -ENOBUFS;
if (sk_can_busy_loop(sk)) {
if (xs->zc)
@@ -649,8 +654,11 @@ static int __xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len
return 0;
pool = xs->pool;
- if (pool->cached_need_wakeup & XDP_WAKEUP_TX)
- return xsk_xmit(sk);
+ if (pool->cached_need_wakeup & XDP_WAKEUP_TX) {
+ if (xs->zc)
+ return xsk_wakeup(xs, XDP_WAKEUP_TX);
+ return xsk_generic_xmit(sk);
+ }
return 0;
}
@@ -670,11 +678,11 @@ static int __xsk_recvmsg(struct socket *sock, struct msghdr *m, size_t len, int
bool need_wait = !(flags & MSG_DONTWAIT);
struct sock *sk = sock->sk;
struct xdp_sock *xs = xdp_sk(sk);
+ int err;
- if (unlikely(!xsk_is_bound(xs)))
- return -ENXIO;
- if (unlikely(!(xs->dev->flags & IFF_UP)))
- return -ENETDOWN;
+ err = xsk_check_common(xs);
+ if (err)
+ return err;
if (unlikely(!xs->rx))
return -ENOBUFS;
if (unlikely(need_wait))
@@ -713,21 +721,20 @@ static __poll_t xsk_poll(struct file *file, struct socket *sock,
sock_poll_wait(file, sock, wait);
rcu_read_lock();
- if (unlikely(!xsk_is_bound(xs))) {
- rcu_read_unlock();
- return mask;
- }
+ if (xsk_check_common(xs))
+ goto skip_tx;
pool = xs->pool;
if (pool->cached_need_wakeup) {
if (xs->zc)
xsk_wakeup(xs, pool->cached_need_wakeup);
- else
+ else if (xs->tx)
/* Poll needs to drive Tx also in copy mode */
- xsk_xmit(sk);
+ xsk_generic_xmit(sk);
}
+skip_tx:
if (xs->rx && !xskq_prod_is_empty(xs->rx))
mask |= EPOLLIN | EPOLLRDNORM;
if (xs->tx && xsk_tx_writeable(xs))
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 250/885] LoongArch, bpf: Use 4 instructions for function address in JIT
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (248 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 249/885] xsk: check IFF_UP earlier in Tx path Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 251/885] bpf: Fix global subprog context argument resolution logic Greg Kroah-Hartman
` (637 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hengqi Chen, Daniel Borkmann,
Tiezhu Yang, Sasha Levin
From: Hengqi Chen <hengqi.chen@gmail.com>
[ Upstream commit 64f50f6575721ef03d001e907455cbe3baa2a5b1 ]
This patch fixes the following issue of function calls in JIT, like:
[ 29.346981] multi-func JIT bug 105 != 103
The issus can be reproduced by running the "inline simple bpf_loop call"
verifier test.
This is because we are emiting 2-4 instructions for 64-bit immediate moves.
During the first pass of JIT, the placeholder address is zero, emiting two
instructions for it. In the extra pass, the function address is in XKVRANGE,
emiting four instructions for it. This change the instruction index in
JIT context. Let's always use 4 instructions for function address in JIT.
So that the instruction sequences don't change between the first pass and
the extra pass for function calls.
Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/bpf/20230214152633.2265699-1-hengqi.chen@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/loongarch/net/bpf_jit.c | 2 +-
arch/loongarch/net/bpf_jit.h | 21 +++++++++++++++++++++
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c
index bdcd0c7719a9e..2467bfb8889a9 100644
--- a/arch/loongarch/net/bpf_jit.c
+++ b/arch/loongarch/net/bpf_jit.c
@@ -782,7 +782,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
if (ret < 0)
return ret;
- move_imm(ctx, t1, func_addr, is32);
+ move_addr(ctx, t1, func_addr);
emit_insn(ctx, jirl, t1, LOONGARCH_GPR_RA, 0);
move_reg(ctx, regmap[BPF_REG_0], LOONGARCH_GPR_A0);
break;
diff --git a/arch/loongarch/net/bpf_jit.h b/arch/loongarch/net/bpf_jit.h
index e665ddb0aeb85..093885539e701 100644
--- a/arch/loongarch/net/bpf_jit.h
+++ b/arch/loongarch/net/bpf_jit.h
@@ -80,6 +80,27 @@ static inline void emit_sext_32(struct jit_ctx *ctx, enum loongarch_gpr reg, boo
emit_insn(ctx, addiw, reg, reg, 0);
}
+static inline void move_addr(struct jit_ctx *ctx, enum loongarch_gpr rd, u64 addr)
+{
+ u64 imm_11_0, imm_31_12, imm_51_32, imm_63_52;
+
+ /* lu12iw rd, imm_31_12 */
+ imm_31_12 = (addr >> 12) & 0xfffff;
+ emit_insn(ctx, lu12iw, rd, imm_31_12);
+
+ /* ori rd, rd, imm_11_0 */
+ imm_11_0 = addr & 0xfff;
+ emit_insn(ctx, ori, rd, rd, imm_11_0);
+
+ /* lu32id rd, imm_51_32 */
+ imm_51_32 = (addr >> 32) & 0xfffff;
+ emit_insn(ctx, lu32id, rd, imm_51_32);
+
+ /* lu52id rd, rd, imm_63_52 */
+ imm_63_52 = (addr >> 52) & 0xfff;
+ emit_insn(ctx, lu52id, rd, rd, imm_63_52);
+}
+
static inline void move_imm(struct jit_ctx *ctx, enum loongarch_gpr rd, long imm, bool is32)
{
long imm_11_0, imm_31_12, imm_51_32, imm_63_52, imm_51_0, imm_51_31;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 251/885] bpf: Fix global subprog context argument resolution logic
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (249 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 250/885] LoongArch, bpf: Use 4 instructions for function address in JIT Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 252/885] irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts Greg Kroah-Hartman
` (636 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrii Nakryiko, Daniel Borkmann,
Stanislav Fomichev, Sasha Levin
From: Andrii Nakryiko <andrii@kernel.org>
[ Upstream commit d384dce281ed1b504fae2e279507827638d56fa3 ]
KPROBE program's user-facing context type is defined as typedef
bpf_user_pt_regs_t. This leads to a problem when trying to passing
kprobe/uprobe/usdt context argument into global subprog, as kernel
always strip away mods and typedefs of user-supplied type, but takes
expected type from bpf_ctx_convert as is, which causes mismatch.
Current way to work around this is to define a fake struct with the same
name as expected typedef:
struct bpf_user_pt_regs_t {};
__noinline my_global_subprog(struct bpf_user_pt_regs_t *ctx) { ... }
This patch fixes the issue by resolving expected type, if it's not
a struct. It still leaves the above work-around working for backwards
compatibility.
Fixes: 91cc1a99740e ("bpf: Annotate context types")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230216045954.3002473-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/bpf/btf.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index a7c2f0c3fc19c..7fcbe5d002070 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -5131,6 +5131,7 @@ btf_get_prog_ctx_type(struct bpf_verifier_log *log, const struct btf *btf,
if (!ctx_struct)
/* should not happen */
return NULL;
+again:
ctx_tname = btf_name_by_offset(btf_vmlinux, ctx_struct->name_off);
if (!ctx_tname) {
/* should not happen */
@@ -5144,8 +5145,16 @@ btf_get_prog_ctx_type(struct bpf_verifier_log *log, const struct btf *btf,
* int socket_filter_bpf_prog(struct __sk_buff *skb)
* { // no fields of skb are ever used }
*/
- if (strcmp(ctx_tname, tname))
- return NULL;
+ if (strcmp(ctx_tname, tname)) {
+ /* bpf_user_pt_regs_t is a typedef, so resolve it to
+ * underlying struct and check name again
+ */
+ if (!btf_type_is_modifier(ctx_struct))
+ return NULL;
+ while (btf_type_is_modifier(ctx_struct))
+ ctx_struct = btf_type_by_id(btf_vmlinux, ctx_struct->type);
+ goto again;
+ }
return ctx_type;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 252/885] irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (250 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 251/885] bpf: Fix global subprog context argument resolution logic Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 253/885] irqchip/irq-bcm7120-l2: " Greg Kroah-Hartman
` (635 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Florian Fainelli,
Philippe Mathieu-Daudé,
Marc Zyngier, Sasha Levin
From: Florian Fainelli <f.fainelli@gmail.com>
[ Upstream commit 94debe03e8afa1267f95a9001786a6aa506b9ff3 ]
When support for the level triggered interrupt controller flavor was
added with c0ca7262088e, we forgot to update the flags to be set to
contain IRQ_LEVEL. While the flow handler is correct, the output from
/proc/interrupts does not show such interrupts as being level triggered
when they are, correct that.
Fixes: c0ca7262088e ("irqchip/brcmstb-l2: Add support for the BCM7271 L2 controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221216230934.2478345-2-f.fainelli@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/irqchip/irq-brcmstb-l2.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-brcmstb-l2.c b/drivers/irqchip/irq-brcmstb-l2.c
index e4efc08ac5948..091b0fe7e3242 100644
--- a/drivers/irqchip/irq-brcmstb-l2.c
+++ b/drivers/irqchip/irq-brcmstb-l2.c
@@ -161,6 +161,7 @@ static int __init brcmstb_l2_intc_of_init(struct device_node *np,
*init_params)
{
unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+ unsigned int set = 0;
struct brcmstb_l2_intc_data *data;
struct irq_chip_type *ct;
int ret;
@@ -208,9 +209,12 @@ static int __init brcmstb_l2_intc_of_init(struct device_node *np,
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
flags |= IRQ_GC_BE_IO;
+ if (init_params->handler == handle_level_irq)
+ set |= IRQ_LEVEL;
+
/* Allocate a single Generic IRQ chip for this node */
ret = irq_alloc_domain_generic_chips(data->domain, 32, 1,
- np->full_name, init_params->handler, clr, 0, flags);
+ np->full_name, init_params->handler, clr, set, flags);
if (ret) {
pr_err("failed to allocate generic irq chip\n");
goto out_free_domain;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 253/885] irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (251 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 252/885] irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 254/885] net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link() Greg Kroah-Hartman
` (634 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Florian Fainelli,
Philippe Mathieu-Daudé,
Marc Zyngier, Sasha Levin
From: Florian Fainelli <f.fainelli@gmail.com>
[ Upstream commit 13a157b38ca5b4f9eed81442b8821db293755961 ]
When support for the interrupt controller was added with a5042de2688d,
we forgot to update the flags to be set to contain IRQ_LEVEL. While the
flow handler is correct, the output from /proc/interrupts does not show
such interrupts as being level triggered when they are, correct that.
Fixes: a5042de2688d ("irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221216230934.2478345-3-f.fainelli@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/irqchip/irq-bcm7120-l2.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-bcm7120-l2.c b/drivers/irqchip/irq-bcm7120-l2.c
index bb6609cebdbce..1e9dab6e0d86f 100644
--- a/drivers/irqchip/irq-bcm7120-l2.c
+++ b/drivers/irqchip/irq-bcm7120-l2.c
@@ -279,7 +279,8 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn,
flags |= IRQ_GC_BE_IO;
ret = irq_alloc_domain_generic_chips(data->domain, IRQS_PER_WORD, 1,
- dn->full_name, handle_level_irq, clr, 0, flags);
+ dn->full_name, handle_level_irq, clr,
+ IRQ_LEVEL, flags);
if (ret) {
pr_err("failed to allocate generic irq chip\n");
goto out_free_domain;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 254/885] net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (252 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 253/885] irqchip/irq-bcm7120-l2: " Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 255/885] net/smc: fix application data exception Greg Kroah-Hartman
` (633 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, D. Wythe, Larysa Zaremba,
Wenjia Zhang, David S. Miller, Sasha Levin
From: D. Wythe <alibuda@linux.alibaba.com>
[ Upstream commit e40b801b3603a8f90b46acbacdea3505c27f01c0 ]
There is a certain chance to trigger the following panic:
PID: 5900 TASK: ffff88c1c8af4100 CPU: 1 COMMAND: "kworker/1:48"
#0 [ffff9456c1cc79a0] machine_kexec at ffffffff870665b7
#1 [ffff9456c1cc79f0] __crash_kexec at ffffffff871b4c7a
#2 [ffff9456c1cc7ab0] crash_kexec at ffffffff871b5b60
#3 [ffff9456c1cc7ac0] oops_end at ffffffff87026ce7
#4 [ffff9456c1cc7ae0] page_fault_oops at ffffffff87075715
#5 [ffff9456c1cc7b58] exc_page_fault at ffffffff87ad0654
#6 [ffff9456c1cc7b80] asm_exc_page_fault at ffffffff87c00b62
[exception RIP: ib_alloc_mr+19]
RIP: ffffffffc0c9cce3 RSP: ffff9456c1cc7c38 RFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000004
RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88c1ea281d00 R8: 000000020a34ffff R9: ffff88c1350bbb20
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000010 R14: ffff88c1ab040a50 R15: ffff88c1ea281d00
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffff9456c1cc7c60] smc_ib_get_memory_region at ffffffffc0aff6df [smc]
#8 [ffff9456c1cc7c88] smcr_buf_map_link at ffffffffc0b0278c [smc]
#9 [ffff9456c1cc7ce0] __smc_buf_create at ffffffffc0b03586 [smc]
The reason here is that when the server tries to create a second link,
smc_llc_srv_add_link() has no protection and may add a new link to
link group. This breaks the security environment protected by
llc_conf_mutex.
Fixes: 2d2209f20189 ("net/smc: first part of add link processing as SMC server")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/smc/af_smc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index e12d4fa5aece6..d9413d43b1045 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -1826,8 +1826,10 @@ static int smcr_serv_conf_first_link(struct smc_sock *smc)
smc_llc_link_active(link);
smcr_lgr_set_type(link->lgr, SMC_LGR_SINGLE);
+ mutex_lock(&link->lgr->llc_conf_mutex);
/* initial contact - try to establish second link */
smc_llc_srv_add_link(link, NULL);
+ mutex_unlock(&link->lgr->llc_conf_mutex);
return 0;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 255/885] net/smc: fix application data exception
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (253 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 254/885] net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link() Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 256/885] selftests/net: Interpret UDP_GRO cmsg data as an int value Greg Kroah-Hartman
` (632 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, D. Wythe, Wenjia Zhang,
David S. Miller, Sasha Levin
From: D. Wythe <alibuda@linux.alibaba.com>
[ Upstream commit 475f9ff63ee8c296aa46c6e9e9ad9bdd301c6bdf ]
There is a certain probability that following
exceptions will occur in the wrk benchmark test:
Running 10s test @ http://11.213.45.6:80
8 threads and 64 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 3.72ms 13.94ms 245.33ms 94.17%
Req/Sec 1.96k 713.67 5.41k 75.16%
155262 requests in 10.10s, 23.10MB read
Non-2xx or 3xx responses: 3
We will find that the error is HTTP 400 error, which is a serious
exception in our test, which means the application data was
corrupted.
Consider the following scenarios:
CPU0 CPU1
buf_desc->used = 0;
cmpxchg(buf_desc->used, 0, 1)
deal_with(buf_desc)
memset(buf_desc->cpu_addr,0);
This will cause the data received by a victim connection to be cleared,
thus triggering an HTTP 400 error in the server.
This patch exchange the order between clear used and memset, add
barrier to ensure memory consistency.
Fixes: 1c5526968e27 ("net/smc: Clear memory when release and reuse buffer")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/smc/smc_core.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c
index c305d8dd23f80..c19d4b7c1f28a 100644
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -1120,8 +1120,9 @@ static void smcr_buf_unuse(struct smc_buf_desc *buf_desc, bool is_rmb,
smc_buf_free(lgr, is_rmb, buf_desc);
} else {
- buf_desc->used = 0;
- memset(buf_desc->cpu_addr, 0, buf_desc->len);
+ /* memzero_explicit provides potential memory barrier semantics */
+ memzero_explicit(buf_desc->cpu_addr, buf_desc->len);
+ WRITE_ONCE(buf_desc->used, 0);
}
}
@@ -1132,19 +1133,17 @@ static void smc_buf_unuse(struct smc_connection *conn,
if (!lgr->is_smcd && conn->sndbuf_desc->is_vm) {
smcr_buf_unuse(conn->sndbuf_desc, false, lgr);
} else {
- conn->sndbuf_desc->used = 0;
- memset(conn->sndbuf_desc->cpu_addr, 0,
- conn->sndbuf_desc->len);
+ memzero_explicit(conn->sndbuf_desc->cpu_addr, conn->sndbuf_desc->len);
+ WRITE_ONCE(conn->sndbuf_desc->used, 0);
}
}
if (conn->rmb_desc) {
if (!lgr->is_smcd) {
smcr_buf_unuse(conn->rmb_desc, true, lgr);
} else {
- conn->rmb_desc->used = 0;
- memset(conn->rmb_desc->cpu_addr, 0,
- conn->rmb_desc->len +
- sizeof(struct smcd_cdc_msg));
+ memzero_explicit(conn->rmb_desc->cpu_addr,
+ conn->rmb_desc->len + sizeof(struct smcd_cdc_msg));
+ WRITE_ONCE(conn->rmb_desc->used, 0);
}
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 256/885] selftests/net: Interpret UDP_GRO cmsg data as an int value
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (254 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 255/885] net/smc: fix application data exception Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 257/885] l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register() Greg Kroah-Hartman
` (631 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eric Dumazet, Jakub Sitnicki,
David S. Miller, Sasha Levin
From: Jakub Sitnicki <jakub@cloudflare.com>
[ Upstream commit 436864095a95fcc611c20c44a111985fa9848730 ]
Data passed to user-space with a (SOL_UDP, UDP_GRO) cmsg carries an
int (see udp_cmsg_recv), not a u16 value, as strace confirms:
recvmsg(8, {msg_name=...,
msg_iov=[{iov_base="\0\0..."..., iov_len=96000}],
msg_iovlen=1,
msg_control=[{cmsg_len=20, <-- sizeof(cmsghdr) + 4
cmsg_level=SOL_UDP,
cmsg_type=0x68}], <-- UDP_GRO
msg_controllen=24,
msg_flags=0}, 0) = 11200
Interpreting the data as an u16 value won't work on big-endian platforms.
Since it is too late to back out of this API decision [1], fix the test.
[1]: https://lore.kernel.org/netdev/20230131174601.203127-1-jakub@cloudflare.com/
Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/net/udpgso_bench_rx.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/udpgso_bench_rx.c b/tools/testing/selftests/net/udpgso_bench_rx.c
index 4058c7451e70d..f35a924d4a303 100644
--- a/tools/testing/selftests/net/udpgso_bench_rx.c
+++ b/tools/testing/selftests/net/udpgso_bench_rx.c
@@ -214,11 +214,10 @@ static void do_verify_udp(const char *data, int len)
static int recv_msg(int fd, char *buf, int len, int *gso_size)
{
- char control[CMSG_SPACE(sizeof(uint16_t))] = {0};
+ char control[CMSG_SPACE(sizeof(int))] = {0};
struct msghdr msg = {0};
struct iovec iov = {0};
struct cmsghdr *cmsg;
- uint16_t *gsosizeptr;
int ret;
iov.iov_base = buf;
@@ -237,8 +236,7 @@ static int recv_msg(int fd, char *buf, int len, int *gso_size)
cmsg = CMSG_NXTHDR(&msg, cmsg)) {
if (cmsg->cmsg_level == SOL_UDP
&& cmsg->cmsg_type == UDP_GRO) {
- gsosizeptr = (uint16_t *) CMSG_DATA(cmsg);
- *gso_size = *gsosizeptr;
+ *gso_size = *(int *)CMSG_DATA(cmsg);
break;
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 257/885] l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (255 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 256/885] selftests/net: Interpret UDP_GRO cmsg data as an int value Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 258/885] net: bcmgenet: fix MoCA LED control Greg Kroah-Hartman
` (630 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Cong Wang, Shigeru Yoshida,
Guillaume Nault, David S. Miller, Sasha Levin
From: Shigeru Yoshida <syoshida@redhat.com>
[ Upstream commit 9ca5e7ecab064f1f47da07f7c1ddf40e4bc0e5ac ]
When a file descriptor of pppol2tp socket is passed as file descriptor
of UDP socket, a recursive deadlock occurs in l2tp_tunnel_register().
This situation is reproduced by the following program:
int main(void)
{
int sock;
struct sockaddr_pppol2tp addr;
sock = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
if (sock < 0) {
perror("socket");
return 1;
}
addr.sa_family = AF_PPPOX;
addr.sa_protocol = PX_PROTO_OL2TP;
addr.pppol2tp.pid = 0;
addr.pppol2tp.fd = sock;
addr.pppol2tp.addr.sin_family = PF_INET;
addr.pppol2tp.addr.sin_port = htons(0);
addr.pppol2tp.addr.sin_addr.s_addr = inet_addr("192.168.0.1");
addr.pppol2tp.s_tunnel = 1;
addr.pppol2tp.s_session = 0;
addr.pppol2tp.d_tunnel = 0;
addr.pppol2tp.d_session = 0;
if (connect(sock, (const struct sockaddr *)&addr, sizeof(addr)) < 0) {
perror("connect");
return 1;
}
return 0;
}
This program causes the following lockdep warning:
============================================
WARNING: possible recursive locking detected
6.2.0-rc5-00205-gc96618275234 #56 Not tainted
--------------------------------------------
repro/8607 is trying to acquire lock:
ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: l2tp_tunnel_register+0x2b7/0x11c0
but task is already holding lock:
ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(sk_lock-AF_PPPOX);
lock(sk_lock-AF_PPPOX);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by repro/8607:
#0: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30
stack backtrace:
CPU: 0 PID: 8607 Comm: repro Not tainted 6.2.0-rc5-00205-gc96618275234 #56
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x178
__lock_acquire.cold+0x119/0x3b9
? lockdep_hardirqs_on_prepare+0x410/0x410
lock_acquire+0x1e0/0x610
? l2tp_tunnel_register+0x2b7/0x11c0
? lock_downgrade+0x710/0x710
? __fget_files+0x283/0x3e0
lock_sock_nested+0x3a/0xf0
? l2tp_tunnel_register+0x2b7/0x11c0
l2tp_tunnel_register+0x2b7/0x11c0
? sprintf+0xc4/0x100
? l2tp_tunnel_del_work+0x6b0/0x6b0
? debug_object_deactivate+0x320/0x320
? lockdep_init_map_type+0x16d/0x7a0
? lockdep_init_map_type+0x16d/0x7a0
? l2tp_tunnel_create+0x2bf/0x4b0
? l2tp_tunnel_create+0x3c6/0x4b0
pppol2tp_connect+0x14e1/0x1a30
? pppol2tp_put_sk+0xd0/0xd0
? aa_sk_perm+0x2b7/0xa80
? aa_af_perm+0x260/0x260
? bpf_lsm_socket_connect+0x9/0x10
? pppol2tp_put_sk+0xd0/0xd0
__sys_connect_file+0x14f/0x190
__sys_connect+0x133/0x160
? __sys_connect_file+0x190/0x190
? lockdep_hardirqs_on+0x7d/0x100
? ktime_get_coarse_real_ts64+0x1b7/0x200
? ktime_get_coarse_real_ts64+0x147/0x200
? __audit_syscall_entry+0x396/0x500
__x64_sys_connect+0x72/0xb0
do_syscall_64+0x38/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
This patch fixes the issue by getting/creating the tunnel before
locking the pppol2tp socket.
Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()")
Cc: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/l2tp/l2tp_ppp.c | 125 ++++++++++++++++++++++++--------------------
1 file changed, 67 insertions(+), 58 deletions(-)
diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
index db2e584c625e5..f011af6601c9c 100644
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -650,54 +650,22 @@ static int pppol2tp_tunnel_mtu(const struct l2tp_tunnel *tunnel)
return mtu - PPPOL2TP_HEADER_OVERHEAD;
}
-/* connect() handler. Attach a PPPoX socket to a tunnel UDP socket
- */
-static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr,
- int sockaddr_len, int flags)
+static struct l2tp_tunnel *pppol2tp_tunnel_get(struct net *net,
+ const struct l2tp_connect_info *info,
+ bool *new_tunnel)
{
- struct sock *sk = sock->sk;
- struct pppox_sock *po = pppox_sk(sk);
- struct l2tp_session *session = NULL;
- struct l2tp_connect_info info;
struct l2tp_tunnel *tunnel;
- struct pppol2tp_session *ps;
- struct l2tp_session_cfg cfg = { 0, };
- bool drop_refcnt = false;
- bool drop_tunnel = false;
- bool new_session = false;
- bool new_tunnel = false;
int error;
- error = pppol2tp_sockaddr_get_info(uservaddr, sockaddr_len, &info);
- if (error < 0)
- return error;
+ *new_tunnel = false;
- lock_sock(sk);
-
- /* Check for already bound sockets */
- error = -EBUSY;
- if (sk->sk_state & PPPOX_CONNECTED)
- goto end;
-
- /* We don't supporting rebinding anyway */
- error = -EALREADY;
- if (sk->sk_user_data)
- goto end; /* socket is already attached */
-
- /* Don't bind if tunnel_id is 0 */
- error = -EINVAL;
- if (!info.tunnel_id)
- goto end;
-
- tunnel = l2tp_tunnel_get(sock_net(sk), info.tunnel_id);
- if (tunnel)
- drop_tunnel = true;
+ tunnel = l2tp_tunnel_get(net, info->tunnel_id);
/* Special case: create tunnel context if session_id and
* peer_session_id is 0. Otherwise look up tunnel using supplied
* tunnel id.
*/
- if (!info.session_id && !info.peer_session_id) {
+ if (!info->session_id && !info->peer_session_id) {
if (!tunnel) {
struct l2tp_tunnel_cfg tcfg = {
.encap = L2TP_ENCAPTYPE_UDP,
@@ -706,40 +674,82 @@ static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr,
/* Prevent l2tp_tunnel_register() from trying to set up
* a kernel socket.
*/
- if (info.fd < 0) {
- error = -EBADF;
- goto end;
- }
+ if (info->fd < 0)
+ return ERR_PTR(-EBADF);
- error = l2tp_tunnel_create(info.fd,
- info.version,
- info.tunnel_id,
- info.peer_tunnel_id, &tcfg,
+ error = l2tp_tunnel_create(info->fd,
+ info->version,
+ info->tunnel_id,
+ info->peer_tunnel_id, &tcfg,
&tunnel);
if (error < 0)
- goto end;
+ return ERR_PTR(error);
l2tp_tunnel_inc_refcount(tunnel);
- error = l2tp_tunnel_register(tunnel, sock_net(sk),
- &tcfg);
+ error = l2tp_tunnel_register(tunnel, net, &tcfg);
if (error < 0) {
kfree(tunnel);
- goto end;
+ return ERR_PTR(error);
}
- drop_tunnel = true;
- new_tunnel = true;
+
+ *new_tunnel = true;
}
} else {
/* Error if we can't find the tunnel */
- error = -ENOENT;
if (!tunnel)
- goto end;
+ return ERR_PTR(-ENOENT);
/* Error if socket is not prepped */
- if (!tunnel->sock)
- goto end;
+ if (!tunnel->sock) {
+ l2tp_tunnel_dec_refcount(tunnel);
+ return ERR_PTR(-ENOENT);
+ }
}
+ return tunnel;
+}
+
+/* connect() handler. Attach a PPPoX socket to a tunnel UDP socket
+ */
+static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr,
+ int sockaddr_len, int flags)
+{
+ struct sock *sk = sock->sk;
+ struct pppox_sock *po = pppox_sk(sk);
+ struct l2tp_session *session = NULL;
+ struct l2tp_connect_info info;
+ struct l2tp_tunnel *tunnel;
+ struct pppol2tp_session *ps;
+ struct l2tp_session_cfg cfg = { 0, };
+ bool drop_refcnt = false;
+ bool new_session = false;
+ bool new_tunnel = false;
+ int error;
+
+ error = pppol2tp_sockaddr_get_info(uservaddr, sockaddr_len, &info);
+ if (error < 0)
+ return error;
+
+ /* Don't bind if tunnel_id is 0 */
+ if (!info.tunnel_id)
+ return -EINVAL;
+
+ tunnel = pppol2tp_tunnel_get(sock_net(sk), &info, &new_tunnel);
+ if (IS_ERR(tunnel))
+ return PTR_ERR(tunnel);
+
+ lock_sock(sk);
+
+ /* Check for already bound sockets */
+ error = -EBUSY;
+ if (sk->sk_state & PPPOX_CONNECTED)
+ goto end;
+
+ /* We don't supporting rebinding anyway */
+ error = -EALREADY;
+ if (sk->sk_user_data)
+ goto end; /* socket is already attached */
+
if (tunnel->peer_tunnel_id == 0)
tunnel->peer_tunnel_id = info.peer_tunnel_id;
@@ -840,8 +850,7 @@ static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr,
}
if (drop_refcnt)
l2tp_session_dec_refcount(session);
- if (drop_tunnel)
- l2tp_tunnel_dec_refcount(tunnel);
+ l2tp_tunnel_dec_refcount(tunnel);
release_sock(sk);
return error;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 258/885] net: bcmgenet: fix MoCA LED control
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (256 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 257/885] l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register() Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 259/885] net: lan966x: Fix possible deadlock inside PTP Greg Kroah-Hartman
` (629 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Doug Berger, Florian Fainelli,
David S. Miller, Sasha Levin
From: Doug Berger <opendmb@gmail.com>
[ Upstream commit a7515af9fb8f0890fe540b108def4a86b9e8330a ]
When the bcmgenet_mii_config() code was refactored it was missed
that the LED control for the MoCA interface got overwritten by
the port_ctrl value. Its previous programming is restored here.
Fixes: 4f8d81b77e66 ("net: bcmgenet: Refactor register access in bcmgenet_mii_config")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/genet/bcmmii.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 7ded559842e83..ded0e64a9f6a1 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -169,15 +169,6 @@ void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
{
- u32 reg;
-
- if (!GENET_IS_V5(priv)) {
- /* Speed settings are set in bcmgenet_mii_setup() */
- reg = bcmgenet_sys_readl(priv, SYS_PORT_CTRL);
- reg |= LED_ACT_SOURCE_MAC;
- bcmgenet_sys_writel(priv, reg, SYS_PORT_CTRL);
- }
-
if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET)
fixed_phy_set_link_update(priv->dev->phydev,
bcmgenet_fixed_phy_link_update);
@@ -210,6 +201,8 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
if (!phy_name) {
phy_name = "MoCA";
+ if (!GENET_IS_V5(priv))
+ port_ctrl |= LED_ACT_SOURCE_MAC;
bcmgenet_moca_phy_setup(priv);
}
break;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 259/885] net: lan966x: Fix possible deadlock inside PTP
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (257 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 258/885] net: bcmgenet: fix MoCA LED control Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 260/885] net/mlx4_en: Introduce flexible array to silence overflow warning Greg Kroah-Hartman
` (628 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Horatiu Vultur, Jakub Kicinski, Sasha Levin
From: Horatiu Vultur <horatiu.vultur@microchip.com>
[ Upstream commit 3a70e0d4c9d74cb00f7c0ec022f5599f9f7ba07d ]
When doing timestamping in lan966x and having PROVE_LOCKING
enabled the following warning is shown.
========================================================
WARNING: possible irq lock inversion dependency detected
6.2.0-rc7-01749-gc54e1f7f7e36 #2786 Tainted: G N
--------------------------------------------------------
swapper/0/0 just changed the state of lock:
c2609f50 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x16c/0x2e8
but this lock took another, SOFTIRQ-unsafe lock in the past:
(&lan966x->ptp_ts_id_lock){+.+.}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lan966x->ptp_ts_id_lock);
local_irq_disable();
lock(_xmit_ETHER#2);
lock(&lan966x->ptp_ts_id_lock);
<Interrupt>
lock(_xmit_ETHER#2);
*** DEADLOCK ***
5 locks held by swapper/0/0:
#0: c1001e18 ((&ndev->rs_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x33c
#1: c105e7c4 (rcu_read_lock){....}-{1:2}, at: ndisc_send_skb+0x134/0x81c
#2: c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x17c/0xc64
#3: c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x4c/0x1224
#4: c3056174 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x354/0x1224
the shortest dependencies between 2nd lock and 1st lock:
-> (&lan966x->ptp_ts_id_lock){+.+.}-{2:2} {
HARDIRQ-ON-W at:
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock+0x38/0x48
lan966x_ptp_irq_handler+0x164/0x2a8
irq_thread_fn+0x1c/0x78
irq_thread+0x130/0x278
kthread+0xec/0x110
ret_from_fork+0x14/0x28
SOFTIRQ-ON-W at:
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock+0x38/0x48
lan966x_ptp_irq_handler+0x164/0x2a8
irq_thread_fn+0x1c/0x78
irq_thread+0x130/0x278
kthread+0xec/0x110
ret_from_fork+0x14/0x28
INITIAL USE at:
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock_irqsave+0x4c/0x68
lan966x_ptp_txtstamp_request+0x128/0x1cc
lan966x_port_xmit+0x224/0x43c
dev_hard_start_xmit+0xa8/0x2f0
sch_direct_xmit+0x108/0x2e8
__dev_queue_xmit+0x41c/0x1224
packet_sendmsg+0xdb4/0x134c
__sys_sendto+0xd0/0x154
sys_send+0x18/0x20
ret_fast_syscall+0x0/0x1c
}
... key at: [<c174ba0c>] __key.2+0x0/0x8
... acquired at:
_raw_spin_lock_irqsave+0x4c/0x68
lan966x_ptp_txtstamp_request+0x128/0x1cc
lan966x_port_xmit+0x224/0x43c
dev_hard_start_xmit+0xa8/0x2f0
sch_direct_xmit+0x108/0x2e8
__dev_queue_xmit+0x41c/0x1224
packet_sendmsg+0xdb4/0x134c
__sys_sendto+0xd0/0x154
sys_send+0x18/0x20
ret_fast_syscall+0x0/0x1c
-> (_xmit_ETHER#2){+.-.}-{2:2} {
HARDIRQ-ON-W at:
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock+0x38/0x48
netif_freeze_queues+0x38/0x68
dev_deactivate_many+0xac/0x388
dev_deactivate+0x38/0x6c
linkwatch_do_dev+0x70/0x8c
__linkwatch_run_queue+0xd4/0x1e8
linkwatch_event+0x24/0x34
process_one_work+0x284/0x744
worker_thread+0x28/0x4bc
kthread+0xec/0x110
ret_from_fork+0x14/0x28
IN-SOFTIRQ-W at:
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock+0x38/0x48
sch_direct_xmit+0x16c/0x2e8
__dev_queue_xmit+0x41c/0x1224
ip6_finish_output2+0x5f4/0xc64
ndisc_send_skb+0x4cc/0x81c
addrconf_rs_timer+0xb0/0x2f8
call_timer_fn+0xb4/0x33c
expire_timers+0xb4/0x10c
run_timer_softirq+0xf8/0x2a8
__do_softirq+0xd4/0x5fc
__irq_exit_rcu+0x138/0x17c
irq_exit+0x8/0x28
__irq_svc+0x90/0xbc
arch_cpu_idle+0x30/0x3c
default_idle_call+0x44/0xac
do_idle+0xc8/0x138
cpu_startup_entry+0x18/0x1c
rest_init+0xcc/0x168
arch_post_acpi_subsys_init+0x0/0x8
INITIAL USE at:
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock+0x38/0x48
netif_freeze_queues+0x38/0x68
dev_deactivate_many+0xac/0x388
dev_deactivate+0x38/0x6c
linkwatch_do_dev+0x70/0x8c
__linkwatch_run_queue+0xd4/0x1e8
linkwatch_event+0x24/0x34
process_one_work+0x284/0x744
worker_thread+0x28/0x4bc
kthread+0xec/0x110
ret_from_fork+0x14/0x28
}
... key at: [<c175974c>] netdev_xmit_lock_key+0x8/0x1c8
... acquired at:
__lock_acquire+0x978/0x2978
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock+0x38/0x48
sch_direct_xmit+0x16c/0x2e8
__dev_queue_xmit+0x41c/0x1224
ip6_finish_output2+0x5f4/0xc64
ndisc_send_skb+0x4cc/0x81c
addrconf_rs_timer+0xb0/0x2f8
call_timer_fn+0xb4/0x33c
expire_timers+0xb4/0x10c
run_timer_softirq+0xf8/0x2a8
__do_softirq+0xd4/0x5fc
__irq_exit_rcu+0x138/0x17c
irq_exit+0x8/0x28
__irq_svc+0x90/0xbc
arch_cpu_idle+0x30/0x3c
default_idle_call+0x44/0xac
do_idle+0xc8/0x138
cpu_startup_entry+0x18/0x1c
rest_init+0xcc/0x168
arch_post_acpi_subsys_init+0x0/0x8
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G N 6.2.0-rc7-01749-gc54e1f7f7e36 #2786
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from mark_lock.part.0+0x59c/0x93c
mark_lock.part.0 from __lock_acquire+0x978/0x2978
__lock_acquire from lock_acquire.part.0+0xb0/0x248
lock_acquire.part.0 from _raw_spin_lock+0x38/0x48
_raw_spin_lock from sch_direct_xmit+0x16c/0x2e8
sch_direct_xmit from __dev_queue_xmit+0x41c/0x1224
__dev_queue_xmit from ip6_finish_output2+0x5f4/0xc64
ip6_finish_output2 from ndisc_send_skb+0x4cc/0x81c
ndisc_send_skb from addrconf_rs_timer+0xb0/0x2f8
addrconf_rs_timer from call_timer_fn+0xb4/0x33c
call_timer_fn from expire_timers+0xb4/0x10c
expire_timers from run_timer_softirq+0xf8/0x2a8
run_timer_softirq from __do_softirq+0xd4/0x5fc
__do_softirq from __irq_exit_rcu+0x138/0x17c
__irq_exit_rcu from irq_exit+0x8/0x28
irq_exit from __irq_svc+0x90/0xbc
Exception stack(0xc1001f20 to 0xc1001f68)
1f20: ffffffff ffffffff 00000001 c011f840 c100e000 c100e000 c1009314 c1009370
1f40: c10f0c1a c0d5e564 c0f5da8c 00000000 00000000 c1001f70 c010f0bc c010f0c0
1f60: 600f0013 ffffffff
__irq_svc from arch_cpu_idle+0x30/0x3c
arch_cpu_idle from default_idle_call+0x44/0xac
default_idle_call from do_idle+0xc8/0x138
do_idle from cpu_startup_entry+0x18/0x1c
cpu_startup_entry from rest_init+0xcc/0x168
rest_init from arch_post_acpi_subsys_init+0x0/0x8
Fix this by using spin_lock_irqsave/spin_lock_irqrestore also
inside lan966x_ptp_irq_handler.
Fixes: e85a96e48e33 ("net: lan966x: Add support for ptp interrupts")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230217210917.2649365-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c b/drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c
index 8e368318558ac..0a0e233f36ab0 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c
@@ -304,9 +304,9 @@ irqreturn_t lan966x_ptp_irq_handler(int irq, void *args)
if (WARN_ON(!skb_match))
continue;
- spin_lock(&lan966x->ptp_ts_id_lock);
+ spin_lock_irqsave(&lan966x->ptp_ts_id_lock, flags);
lan966x->ptp_skbs--;
- spin_unlock(&lan966x->ptp_ts_id_lock);
+ spin_unlock_irqrestore(&lan966x->ptp_ts_id_lock, flags);
/* Get the h/w timestamp */
lan966x_get_hwtimestamp(lan966x, &ts, delay);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 260/885] net/mlx4_en: Introduce flexible array to silence overflow warning
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (258 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 259/885] net: lan966x: Fix possible deadlock inside PTP Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 261/885] selftest: fib_tests: Always cleanup before exit Greg Kroah-Hartman
` (627 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Josef Oskera, Yishai Hadas,
Kees Cook, Tariq Toukan, Jakub Kicinski, Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit f8f185e39b4de91bc5235e5be0d829bea69d9b06 ]
The call "skb_copy_from_linear_data(skb, inl + 1, spc)" triggers a FORTIFY
memcpy() warning on ppc64 platform:
In function ‘fortify_memcpy_chk’,
inlined from ‘skb_copy_from_linear_data’ at ./include/linux/skbuff.h:4029:2,
inlined from ‘build_inline_wqe’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:722:4,
inlined from ‘mlx4_en_xmit’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:1066:3:
./include/linux/fortify-string.h:513:25: error: call to ‘__write_overflow_field’ declared with
attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()?
[-Werror=attribute-warning]
513 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Same behaviour on x86 you can get if you use "__always_inline" instead of
"inline" for skb_copy_from_linear_data() in skbuff.h
The call here copies data into inlined tx destricptor, which has 104
bytes (MAX_INLINE) space for data payload. In this case "spc" is known
in compile-time but the destination is used with hidden knowledge
(real structure of destination is different from that the compiler
can see). That cause the fortify warning because compiler can check
bounds, but the real bounds are different. "spc" can't be bigger than
64 bytes (MLX4_INLINE_ALIGN), so the data can always fit into inlined
tx descriptor. The fact that "inl" points into inlined tx descriptor is
determined earlier in mlx4_en_xmit().
Avoid confusing the compiler with "inl + 1" constructions to get to past
the inl header by introducing a flexible array "data" to the struct so
that the compiler can see that we are not dealing with an array of inl
structs, but rather, arbitrary data following the structure. There are
no changes to the structure layout reported by pahole, and the resulting
machine code is actually smaller.
Reported-by: Josef Oskera <joskera@redhat.com>
Link: https://lore.kernel.org/lkml/20230217094541.2362873-1-joskera@redhat.com
Fixes: f68f2ff91512 ("fortify: Detect struct member overflows in memcpy() at compile-time")
Cc: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20230218183842.never.954-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlx4/en_tx.c | 22 +++++++++++-----------
include/linux/mlx4/qp.h | 1 +
2 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 43a4102e9c091..7fccf1a79f09b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -697,32 +697,32 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc,
inl->byte_count = cpu_to_be32(1 << 31 | skb->len);
} else {
inl->byte_count = cpu_to_be32(1 << 31 | MIN_PKT_LEN);
- memset(((void *)(inl + 1)) + skb->len, 0,
+ memset(inl->data + skb->len, 0,
MIN_PKT_LEN - skb->len);
}
- skb_copy_from_linear_data(skb, inl + 1, hlen);
+ skb_copy_from_linear_data(skb, inl->data, hlen);
if (shinfo->nr_frags)
- memcpy(((void *)(inl + 1)) + hlen, fragptr,
+ memcpy(inl->data + hlen, fragptr,
skb_frag_size(&shinfo->frags[0]));
} else {
inl->byte_count = cpu_to_be32(1 << 31 | spc);
if (hlen <= spc) {
- skb_copy_from_linear_data(skb, inl + 1, hlen);
+ skb_copy_from_linear_data(skb, inl->data, hlen);
if (hlen < spc) {
- memcpy(((void *)(inl + 1)) + hlen,
+ memcpy(inl->data + hlen,
fragptr, spc - hlen);
fragptr += spc - hlen;
}
- inl = (void *) (inl + 1) + spc;
- memcpy(((void *)(inl + 1)), fragptr, skb->len - spc);
+ inl = (void *)inl->data + spc;
+ memcpy(inl->data, fragptr, skb->len - spc);
} else {
- skb_copy_from_linear_data(skb, inl + 1, spc);
- inl = (void *) (inl + 1) + spc;
- skb_copy_from_linear_data_offset(skb, spc, inl + 1,
+ skb_copy_from_linear_data(skb, inl->data, spc);
+ inl = (void *)inl->data + spc;
+ skb_copy_from_linear_data_offset(skb, spc, inl->data,
hlen - spc);
if (shinfo->nr_frags)
- memcpy(((void *)(inl + 1)) + hlen - spc,
+ memcpy(inl->data + hlen - spc,
fragptr,
skb_frag_size(&shinfo->frags[0]));
}
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 9db93e487496a..b6b626157b03a 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -446,6 +446,7 @@ enum {
struct mlx4_wqe_inline_seg {
__be32 byte_count;
+ __u8 data[];
};
enum mlx4_update_qp_attr {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 261/885] selftest: fib_tests: Always cleanup before exit
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (259 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 260/885] net/mlx4_en: Introduce flexible array to silence overflow warning Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 262/885] sefltests: netdevsim: wait for devlink instance after netns removal Greg Kroah-Hartman
` (626 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Roxana Nicolescu, Paolo Abeni, Sasha Levin
From: Roxana Nicolescu <roxana.nicolescu@canonical.com>
[ Upstream commit b60417a9f2b890a8094477b2204d4f73c535725e ]
Usage of `set -e` before executing a command causes immediate exit
on failure, without cleanup up the resources allocated at setup.
This can affect the next tests that use the same resources,
leading to a chain of failures.
A simple fix is to always call cleanup function when the script exists.
This approach is already used by other existing tests.
Fixes: 1056691b2680 ("selftests: fib_tests: Make test results more verbose")
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Link: https://lore.kernel.org/r/20230220110400.26737-2-roxana.nicolescu@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/net/fib_tests.sh | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
index 5637b5dadabdb..70ea8798b1f60 100755
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -2065,6 +2065,8 @@ EOF
################################################################################
# main
+trap cleanup EXIT
+
while getopts :t:pPhv o
do
case $o in
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 262/885] sefltests: netdevsim: wait for devlink instance after netns removal
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (260 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 261/885] selftest: fib_tests: Always cleanup before exit Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 263/885] drm: Fix potential null-ptr-deref due to drmm_mode_config_init() Greg Kroah-Hartman
` (625 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Amir Tzin, Jiri Pirko, Pavan Chebbi,
Paolo Abeni, Sasha Levin
From: Jiri Pirko <jiri@nvidia.com>
[ Upstream commit f922c7b1c1c45740d329bf248936fdb78c0cff6e ]
When devlink instance is put into network namespace and that network
namespace gets deleted, devlink instance is moved back into init_ns.
This is done as a part of cleanup_net() routine. Since cleanup_net()
is called asynchronously from workqueue, there is no guarantee that
the devlink instance move is done after "ip netns del" returns.
So fix this race by making sure that the devlink instance is present
before any other operation.
Reported-by: Amir Tzin <amirtz@nvidia.com>
Fixes: b74c37fd35a2 ("selftests: netdevsim: add tests for devlink reload with resources")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230220132336.198597-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../selftests/drivers/net/netdevsim/devlink.sh | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh
index a08c02abde121..7f7d20f222070 100755
--- a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh
+++ b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh
@@ -17,6 +17,18 @@ SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV_NAME/net/
DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV_NAME/
DL_HANDLE=netdevsim/$DEV_NAME
+wait_for_devlink()
+{
+ "$@" | grep -q $DL_HANDLE
+}
+
+devlink_wait()
+{
+ local timeout=$1
+
+ busywait "$timeout" wait_for_devlink devlink dev
+}
+
fw_flash_test()
{
RET=0
@@ -256,6 +268,9 @@ netns_reload_test()
ip netns del testns2
ip netns del testns1
+ # Wait until netns async cleanup is done.
+ devlink_wait 2000
+
log_test "netns reload test"
}
@@ -348,6 +363,9 @@ resource_test()
ip netns del testns2
ip netns del testns1
+ # Wait until netns async cleanup is done.
+ devlink_wait 2000
+
log_test "resource test"
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 263/885] drm: Fix potential null-ptr-deref due to drmm_mode_config_init()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (261 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 262/885] sefltests: netdevsim: wait for devlink instance after netns removal Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 264/885] drm/fourcc: Add missing big-endian XRGB1555 and RGB565 formats Greg Kroah-Hartman
` (624 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Thomas Zimmermann,
Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit 834c23e4f798dcdc8af251b3c428ceef94741991 ]
drmm_mode_config_init() will call drm_mode_create_standard_properties()
and won't check the ret value. When drm_mode_create_standard_properties()
failed due to alloc, property will be a NULL pointer and may causes the
null-ptr-deref. Fix the null-ptr-deref by adding the ret value check.
Found null-ptr-deref while testing insert module bochs:
general protection fault, probably for non-canonical address
0xdffffc000000000c: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 3 PID: 249 Comm: modprobe Not tainted 6.1.0-rc1+ #364
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:drm_object_attach_property+0x73/0x3c0 [drm]
Call Trace:
<TASK>
__drm_connector_init+0xb6c/0x1100 [drm]
bochs_pci_probe.cold.11+0x4cb/0x7fe [bochs]
pci_device_probe+0x17d/0x340
really_probe+0x1db/0x5d0
__driver_probe_device+0x1e7/0x250
driver_probe_device+0x4a/0x120
__driver_attach+0xcd/0x2c0
bus_for_each_dev+0x11a/0x1b0
bus_add_driver+0x3d7/0x500
driver_register+0x18e/0x320
do_one_initcall+0xc4/0x3e0
do_init_module+0x1b4/0x630
load_module+0x5dca/0x7230
__do_sys_finit_module+0x100/0x170
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff65af9f839
Fixes: 6b4959f43a04 ("drm/atomic: atomic plane properties")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118021651.2460-1-shangxiaojing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_mode_config.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
index 688c8afe0bf17..8525ef8515406 100644
--- a/drivers/gpu/drm/drm_mode_config.c
+++ b/drivers/gpu/drm/drm_mode_config.c
@@ -399,6 +399,8 @@ static void drm_mode_config_init_release(struct drm_device *dev, void *ptr)
*/
int drmm_mode_config_init(struct drm_device *dev)
{
+ int ret;
+
mutex_init(&dev->mode_config.mutex);
drm_modeset_lock_init(&dev->mode_config.connection_mutex);
mutex_init(&dev->mode_config.idr_mutex);
@@ -420,7 +422,11 @@ int drmm_mode_config_init(struct drm_device *dev)
init_llist_head(&dev->mode_config.connector_free_list);
INIT_WORK(&dev->mode_config.connector_free_work, drm_connector_free_work_fn);
- drm_mode_create_standard_properties(dev);
+ ret = drm_mode_create_standard_properties(dev);
+ if (ret) {
+ drm_mode_config_cleanup(dev);
+ return ret;
+ }
/* Just to be sure */
dev->mode_config.num_fb = 0;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 264/885] drm/fourcc: Add missing big-endian XRGB1555 and RGB565 formats
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (262 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 263/885] drm: Fix potential null-ptr-deref due to drmm_mode_config_init() Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 265/885] drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match spec Greg Kroah-Hartman
` (623 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Geert Uytterhoeven, Daniel Vetter,
Sasha Levin
From: Geert Uytterhoeven <geert@linux-m68k.org>
[ Upstream commit 6fb6c979ca628583d4d0c59a0f8ff977e581ecc0 ]
As of commit eae06120f1974e1a ("drm: refuse ADDFB2 ioctl for broken
bigendian drivers"), drivers must set the
quirk_addfb_prefer_host_byte_order quirk to make the drm_mode_addfb()
compat code work correctly on big-endian machines.
While that works fine for big-endian XRGB8888 and ARGB8888, which are
mapped to the existing little-endian BGRX8888 and BGRA8888 formats, it
does not work for big-endian XRGB1555 and RGB565, as the latter are not
listed in the format database.
Fix this by adding the missing formats. Limit this to big-endian
platforms, as there is currently no need to support these formats on
little-endian platforms.
Fixes: 6960e6da9cec3f66 ("drm: fix drm_mode_addfb() on big endian machines.")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/3ee1f8144feb96c28742b22384189f1f83bcfc1a.1669221671.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_fourcc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/drm_fourcc.c b/drivers/gpu/drm/drm_fourcc.c
index 6242dfbe92402..0f17dfa8702b4 100644
--- a/drivers/gpu/drm/drm_fourcc.c
+++ b/drivers/gpu/drm/drm_fourcc.c
@@ -190,6 +190,10 @@ const struct drm_format_info *__drm_format_info(u32 format)
{ .format = DRM_FORMAT_BGRA5551, .depth = 15, .num_planes = 1, .cpp = { 2, 0, 0 }, .hsub = 1, .vsub = 1, .has_alpha = true },
{ .format = DRM_FORMAT_RGB565, .depth = 16, .num_planes = 1, .cpp = { 2, 0, 0 }, .hsub = 1, .vsub = 1 },
{ .format = DRM_FORMAT_BGR565, .depth = 16, .num_planes = 1, .cpp = { 2, 0, 0 }, .hsub = 1, .vsub = 1 },
+#ifdef __BIG_ENDIAN
+ { .format = DRM_FORMAT_XRGB1555 | DRM_FORMAT_BIG_ENDIAN, .depth = 15, .num_planes = 1, .cpp = { 2, 0, 0 }, .hsub = 1, .vsub = 1 },
+ { .format = DRM_FORMAT_RGB565 | DRM_FORMAT_BIG_ENDIAN, .depth = 16, .num_planes = 1, .cpp = { 2, 0, 0 }, .hsub = 1, .vsub = 1 },
+#endif
{ .format = DRM_FORMAT_RGB888, .depth = 24, .num_planes = 1, .cpp = { 3, 0, 0 }, .hsub = 1, .vsub = 1 },
{ .format = DRM_FORMAT_BGR888, .depth = 24, .num_planes = 1, .cpp = { 3, 0, 0 }, .hsub = 1, .vsub = 1 },
{ .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 1, .cpp = { 4, 0, 0 }, .hsub = 1, .vsub = 1 },
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 265/885] drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match spec
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (263 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 264/885] drm/fourcc: Add missing big-endian XRGB1555 and RGB565 formats Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 266/885] drm: mxsfb: DRM_IMX_LCDIF should depend on ARCH_MXC Greg Kroah-Hartman
` (622 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Frieder Schrempf, Alexander Stein,
Robert Foss, Sasha Levin
From: Frieder Schrempf <frieder.schrempf@kontron.de>
[ Upstream commit 4b03d5e0d3e86ee492d54254927d020dc0fe8acf ]
The datasheet specifies a delay of 10 milliseconds, but the current
driver only waits for 1 ms. Fix this to make sure the initialization
sequence meets the spec.
Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122081219.20143-1-frieder@fris.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/bridge/ti-sn65dsi83.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
index 7ba9467fff129..047c14ddbbf11 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
@@ -346,7 +346,7 @@ static void sn65dsi83_atomic_enable(struct drm_bridge *bridge,
/* Deassert reset */
gpiod_set_value_cansleep(ctx->enable_gpio, 1);
- usleep_range(1000, 1100);
+ usleep_range(10000, 11000);
/* Get the LVDS format from the bridge state. */
bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 266/885] drm: mxsfb: DRM_IMX_LCDIF should depend on ARCH_MXC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (264 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 265/885] drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match spec Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 267/885] drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC Greg Kroah-Hartman
` (621 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Geert Uytterhoeven, Marek Vasut,
Sasha Levin
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit 10ef5f2992006720318b9886961820155b3750fd ]
The Freescale/NXP i.MX LCDIFv3 LCD controller is only present on
Freescale/NXP i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent
asking the user about this driver when configuring a kernel without
Freescale/NXP i.MX support.
Fixes: 9db35bb349a0ef32 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/6103c1aa65a7888c12d351ae63f29850f29f42b9.1669046403.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/mxsfb/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/mxsfb/Kconfig b/drivers/gpu/drm/mxsfb/Kconfig
index 116f8168bda4a..aa4b0eb2a562b 100644
--- a/drivers/gpu/drm/mxsfb/Kconfig
+++ b/drivers/gpu/drm/mxsfb/Kconfig
@@ -24,6 +24,7 @@ config DRM_IMX_LCDIF
tristate "i.MX LCDIFv3 LCD controller"
depends on DRM && OF
depends on COMMON_CLK
+ depends on ARCH_MXC || COMPILE_TEST
select DRM_MXS
select DRM_KMS_HELPER
select DRM_GEM_DMA_HELPER
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 267/885] drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (265 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 266/885] drm: mxsfb: DRM_IMX_LCDIF should depend on ARCH_MXC Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 268/885] drm/bridge: megachips: Fix error handling in i2c_register_driver() Greg Kroah-Hartman
` (620 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Geert Uytterhoeven, Marek Vasut,
Sasha Levin
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit 7783cc67862f9166c901bfa0f80b717aa8d354dd ]
Freescale/NXP i.MX LCDIF and eLCDIF LCD controllers are only present on
Freescale/NXP i.MX SoCs. Hence add a dependency on ARCH_MXS ||
ARCH_MXC, to prevent asking the user about this driver when configuring
a kernel without Freescale/NXP i.MX support.
Fixes: 45d59d704080cc0c ("drm: Add new driver for MXSFB controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/98e74779ca2bc575d91afff03369e86b080c01ac.1669046358.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/mxsfb/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/mxsfb/Kconfig b/drivers/gpu/drm/mxsfb/Kconfig
index aa4b0eb2a562b..518b533453548 100644
--- a/drivers/gpu/drm/mxsfb/Kconfig
+++ b/drivers/gpu/drm/mxsfb/Kconfig
@@ -8,6 +8,7 @@ config DRM_MXSFB
tristate "i.MX (e)LCDIF LCD controller"
depends on DRM && OF
depends on COMMON_CLK
+ depends on ARCH_MXS || ARCH_MXC || COMPILE_TEST
select DRM_MXS
select DRM_KMS_HELPER
select DRM_GEM_DMA_HELPER
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 268/885] drm/bridge: megachips: Fix error handling in i2c_register_driver()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (266 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 267/885] drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 269/885] drm/vkms: Fix memory leak in vkms_init() Greg Kroah-Hartman
` (619 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Andrzej Hajda, Ian Ray,
Robert Foss, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 4ecff954c370b82bce45bdca2846c5c5563e8a8a ]
A problem about insmod megachips-stdpxxxx-ge-b850v3-fw.ko failed is
triggered with the following log given:
[ 4497.981497] Error: Driver 'stdp4028-ge-b850v3-fw' is already registered, aborting...
insmod: ERROR: could not insert module megachips-stdpxxxx-ge-b850v3-fw.ko: Device or resource busy
The reason is that stdpxxxx_ge_b850v3_init() returns i2c_add_driver()
directly without checking its return value, if i2c_add_driver() failed,
it returns without calling i2c_del_driver() on the previous i2c driver,
resulting the megachips-stdpxxxx-ge-b850v3-fw can never be installed
later.
A simple call graph is shown as below:
stdpxxxx_ge_b850v3_init()
i2c_add_driver(&stdp4028_ge_b850v3_fw_driver)
i2c_add_driver(&stdp2690_ge_b850v3_fw_driver)
i2c_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without delete stdp4028_ge_b850v3_fw_driver
Fix by calling i2c_del_driver() on stdp4028_ge_b850v3_fw_driver when
i2c_add_driver() returns error.
Fixes: fcfa0ddc18ed ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108091226.114524-1-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
index 97359f807bfc3..cbfa05a6767b5 100644
--- a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
+++ b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
@@ -440,7 +440,11 @@ static int __init stdpxxxx_ge_b850v3_init(void)
if (ret)
return ret;
- return i2c_add_driver(&stdp2690_ge_b850v3_fw_driver);
+ ret = i2c_add_driver(&stdp2690_ge_b850v3_fw_driver);
+ if (ret)
+ i2c_del_driver(&stdp4028_ge_b850v3_fw_driver);
+
+ return ret;
}
module_init(stdpxxxx_ge_b850v3_init);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 269/885] drm/vkms: Fix memory leak in vkms_init()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (267 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 268/885] drm/bridge: megachips: Fix error handling in i2c_register_driver() Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 270/885] drm/vkms: Fix null-ptr-deref in vkms_release() Greg Kroah-Hartman
` (618 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Melissa Wen, Melissa Wen,
Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 0d0b368b9d104b437e1f4850ae94bdb9a3601e89 ]
A memory leak was reported after the vkms module install failed.
unreferenced object 0xffff88810bc28520 (size 16):
comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s)
hex dump (first 16 bytes):
01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff ...d............
backtrace:
[<00000000e7561ff8>] kmalloc_trace+0x27/0x60
[<000000000b1954a0>] 0xffffffffc45200a9
[<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0
[<000000001505ee87>] do_init_module+0x1a4/0x680
[<00000000958079ad>] load_module+0x6249/0x7110
[<00000000117e4696>] __do_sys_finit_module+0x140/0x200
[<00000000f74b12d2>] do_syscall_64+0x35/0x80
[<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
The reason is that the vkms_init() returns without checking the return
value of vkms_create(), and if the vkms_create() failed, the config
allocated at the beginning of vkms_init() is leaked.
vkms_init()
config = kmalloc(...) # config allocated
...
return vkms_create() # vkms_create failed and config is leaked
Fix this problem by checking return value of vkms_create() and free the
config if error happened.
Fixes: 2df7af93fdad ("drm/vkms: Add vkms_config type")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101065156.41584-2-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/vkms/vkms_drv.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
index 0ffe5f0e33f75..dfe983eaa07ff 100644
--- a/drivers/gpu/drm/vkms/vkms_drv.c
+++ b/drivers/gpu/drm/vkms/vkms_drv.c
@@ -218,6 +218,7 @@ static int vkms_create(struct vkms_config *config)
static int __init vkms_init(void)
{
+ int ret;
struct vkms_config *config;
config = kmalloc(sizeof(*config), GFP_KERNEL);
@@ -230,7 +231,11 @@ static int __init vkms_init(void)
config->writeback = enable_writeback;
config->overlay = enable_overlay;
- return vkms_create(config);
+ ret = vkms_create(config);
+ if (ret)
+ kfree(config);
+
+ return ret;
}
static void vkms_destroy(struct vkms_config *config)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 270/885] drm/vkms: Fix null-ptr-deref in vkms_release()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (268 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 269/885] drm/vkms: Fix memory leak in vkms_init() Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 271/885] drm/vc4: dpi: Fix format mapping for RGB565 Greg Kroah-Hartman
` (617 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Melissa Wen, Melissa Wen,
Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 2fe2a8f40c21161ffe7653cc234e7934db5b7cc5 ]
A null-ptr-deref is triggered when it tries to destroy the workqueue in
vkms->output.composer_workq in vkms_release().
KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
CPU: 5 PID: 17193 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf #24
RIP: 0010:destroy_workqueue+0x2f/0x710
...
Call Trace:
<TASK>
? vkms_config_debugfs_init+0x50/0x50 [vkms]
__devm_drm_dev_alloc+0x15a/0x1c0 [drm]
vkms_init+0x245/0x1000 [vkms]
do_one_initcall+0xd0/0x4f0
do_init_module+0x1a4/0x680
load_module+0x6249/0x7110
__do_sys_finit_module+0x140/0x200
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The reason is that an OOM happened which triggers the destroy of the
workqueue, however, the workqueue is alloced in the later process,
thus a null-ptr-deref happened. A simple call graph is shown as below:
vkms_init()
vkms_create()
devm_drm_dev_alloc()
__devm_drm_dev_alloc()
devm_drm_dev_init()
devm_add_action_or_reset()
devm_add_action() # an error happened
devm_drm_dev_init_release()
drm_dev_put()
kref_put()
drm_dev_release()
vkms_release()
destroy_workqueue() # null-ptr-deref happened
vkms_modeset_init()
vkms_output_init()
vkms_crtc_init() # where the workqueue get allocated
Fix this by checking if composer_workq is NULL before passing it to
the destroy_workqueue() in vkms_release().
Fixes: 6c234fe37c57 ("drm/vkms: Implement CRC debugfs API")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101065156.41584-3-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/vkms/vkms_drv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
index dfe983eaa07ff..f716c5796f5fc 100644
--- a/drivers/gpu/drm/vkms/vkms_drv.c
+++ b/drivers/gpu/drm/vkms/vkms_drv.c
@@ -57,7 +57,8 @@ static void vkms_release(struct drm_device *dev)
{
struct vkms_device *vkms = drm_device_to_vkms_device(dev);
- destroy_workqueue(vkms->output.composer_workq);
+ if (vkms->output.composer_workq)
+ destroy_workqueue(vkms->output.composer_workq);
}
static void vkms_atomic_commit_tail(struct drm_atomic_state *old_state)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 271/885] drm/vc4: dpi: Fix format mapping for RGB565
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (269 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 270/885] drm/vkms: Fix null-ptr-deref in vkms_release() Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 272/885] drm: tidss: Fix pixel format definition Greg Kroah-Hartman
` (616 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dave Stevenson, Laurent Pinchart,
Maxime Ripard, Sasha Levin
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
[ Upstream commit 0870d86eac8a9abd89a0be1b719d5dc5bac936f0 ]
The mapping is incorrect for RGB565_1X16 as it should be
DPI_FORMAT_18BIT_666_RGB_1 instead of DPI_FORMAT_18BIT_666_RGB_3.
Fixes: 08302c35b59d ("drm/vc4: Add DPI driver")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-7-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/vc4/vc4_dpi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vc4/vc4_dpi.c b/drivers/gpu/drm/vc4/vc4_dpi.c
index 1f8f44b7b5a5f..61ef7d232a12c 100644
--- a/drivers/gpu/drm/vc4/vc4_dpi.c
+++ b/drivers/gpu/drm/vc4/vc4_dpi.c
@@ -179,7 +179,7 @@ static void vc4_dpi_encoder_enable(struct drm_encoder *encoder)
DPI_FORMAT);
break;
case MEDIA_BUS_FMT_RGB565_1X16:
- dpi_c |= VC4_SET_FIELD(DPI_FORMAT_16BIT_565_RGB_3,
+ dpi_c |= VC4_SET_FIELD(DPI_FORMAT_16BIT_565_RGB_1,
DPI_FORMAT);
break;
default:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 272/885] drm: tidss: Fix pixel format definition
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (270 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 271/885] drm/vc4: dpi: Fix format mapping for RGB565 Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 273/885] gpu: ipu-v3: common: Add of_node_put() for reference returned by of_graph_get_port_by_id() Greg Kroah-Hartman
` (615 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Randolph Sapp, Aradhya Bhatia,
Andrew Davis, Tomi Valkeinen, Sasha Levin
From: Randolph Sapp <rs@ti.com>
[ Upstream commit 2df0433b18f2735a49d2c3a968b40fa2881137c0 ]
There was a long-standing bug from a typo that created 2 ARGB1555 and
ABGR1555 pixel format entries. Weston 10 has a sanity check that alerted
me to this issue.
According to the Supported Pixel Data formats table we have the later
entries should have been for Alpha-X instead.
Signed-off-by: Randolph Sapp <rs@ti.com>
Fixes: 32a1795f57eecc ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202001803.1765805-1-rs@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/tidss/tidss_dispc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c
index ad93acc9abd2a..16301bdfead12 100644
--- a/drivers/gpu/drm/tidss/tidss_dispc.c
+++ b/drivers/gpu/drm/tidss/tidss_dispc.c
@@ -1858,8 +1858,8 @@ static const struct {
{ DRM_FORMAT_XBGR4444, 0x21, },
{ DRM_FORMAT_RGBX4444, 0x22, },
- { DRM_FORMAT_ARGB1555, 0x25, },
- { DRM_FORMAT_ABGR1555, 0x26, },
+ { DRM_FORMAT_XRGB1555, 0x25, },
+ { DRM_FORMAT_XBGR1555, 0x26, },
{ DRM_FORMAT_XRGB8888, 0x27, },
{ DRM_FORMAT_XBGR8888, 0x28, },
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 273/885] gpu: ipu-v3: common: Add of_node_put() for reference returned by of_graph_get_port_by_id()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (271 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 272/885] drm: tidss: Fix pixel format definition Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 274/885] drm/vc4: drop all currently held locks if deadlock happens Greg Kroah-Hartman
` (614 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Liang He, Philipp Zabel, Sasha Levin
From: Liang He <windhl@126.com>
[ Upstream commit 9afdf98cfdfa2ba8ec068cf08c5fcdc1ed8daf3f ]
In ipu_add_client_devices(), we need to call of_node_put() for
reference returned by of_graph_get_port_by_id() in fail path.
Fixes: 17e052175039 ("gpu: ipu-v3: Do not bail out on missing optional port nodes")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220720152227.1288413-1-windhl@126.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720152227.1288413-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/ipu-v3/ipu-common.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c
index 118318513e2d2..c35eac1116f5f 100644
--- a/drivers/gpu/ipu-v3/ipu-common.c
+++ b/drivers/gpu/ipu-v3/ipu-common.c
@@ -1165,6 +1165,7 @@ static int ipu_add_client_devices(struct ipu_soc *ipu, unsigned long ipu_base)
pdev = platform_device_alloc(reg->name, id++);
if (!pdev) {
ret = -ENOMEM;
+ of_node_put(of_node);
goto err_register;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 274/885] drm/vc4: drop all currently held locks if deadlock happens
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (272 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 273/885] gpu: ipu-v3: common: Add of_node_put() for reference returned by of_graph_get_port_by_id() Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 275/885] hwmon: (ftsteutates) Fix scaling of measurements Greg Kroah-Hartman
` (613 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stefan Wahren, Maíra Canal,
Maxime Ripard, Sasha Levin
From: Maíra Canal <mcanal@igalia.com>
[ Upstream commit 479d4f0be4237ba33bc9432787aeb62c90e30f95 ]
If vc4_hdmi_reset_link() returns -EDEADLK, it means that a deadlock
happened in the locking context. This situation should be addressed by
dropping all currently held locks and block until the contended lock
becomes available. Currently, vc4 is not dealing with the deadlock
properly, producing the following output when PROVE_LOCKING is enabled:
[ 825.612809] ------------[ cut here ]------------
[ 825.612852] WARNING: CPU: 1 PID: 116 at drivers/gpu/drm/drm_modeset_lock.c:276 drm_modeset_drop_locks+0x60/0x68 [drm]
[ 825.613458] Modules linked in: 8021q mrp garp stp llc
raspberrypi_cpufreq brcmfmac brcmutil crct10dif_ce hci_uart cfg80211
btqca btbcm bluetooth vc4 raspberrypi_hwmon snd_soc_hdmi_codec cec
clk_raspberrypi ecdh_generic drm_display_helper ecc rfkill
drm_dma_helper drm_kms_helper pwm_bcm2835 bcm2835_thermal bcm2835_rng
rng_core i2c_bcm2835 drm fuse ip_tables x_tables ipv6
[ 825.613735] CPU: 1 PID: 116 Comm: kworker/1:2 Tainted: G W 6.1.0-rc6-01399-g941aae326315 #3
[ 825.613759] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 825.613777] Workqueue: events output_poll_execute [drm_kms_helper]
[ 825.614038] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 825.614063] pc : drm_modeset_drop_locks+0x60/0x68 [drm]
[ 825.614603] lr : drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper]
[ 825.614829] sp : ffff800008313bf0
[ 825.614844] x29: ffff800008313bf0 x28: ffffcd7778b8b000 x27: 0000000000000000
[ 825.614883] x26: 0000000000000001 x25: 0000000000000001 x24: ffff677cc35c2758
[ 825.614920] x23: ffffcd7707d01430 x22: ffffcd7707c3edc7 x21: 0000000000000001
[ 825.614958] x20: 0000000000000000 x19: ffff800008313c10 x18: 000000000000b6d3
[ 825.614995] x17: ffffcd777835e214 x16: ffffcd7777cef870 x15: fffff81000000000
[ 825.615033] x14: 0000000000000000 x13: 0000000000000099 x12: 0000000000000002
[ 825.615070] x11: 72917988020af800 x10: 72917988020af800 x9 : 72917988020af800
[ 825.615108] x8 : ffff677cc665e0a8 x7 : d00a8c180000110c x6 : ffffcd77774c0054
[ 825.615145] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
[ 825.615181] x2 : ffff677cc55e1880 x1 : ffffcd7777cef8ec x0 : ffff800008313c10
[ 825.615219] Call trace:
[ 825.615232] drm_modeset_drop_locks+0x60/0x68 [drm]
[ 825.615773] drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper]
[ 825.616003] output_poll_execute+0xe4/0x224 [drm_kms_helper]
[ 825.616233] process_one_work+0x2b4/0x618
[ 825.616264] worker_thread+0x24c/0x464
[ 825.616288] kthread+0xec/0x110
[ 825.616310] ret_from_fork+0x10/0x20
[ 825.616335] irq event stamp: 7634
[ 825.616349] hardirqs last enabled at (7633): [<ffffcd777831ee90>] _raw_spin_unlock_irq+0x3c/0x78
[ 825.616384] hardirqs last disabled at (7634): [<ffffcd7778315a78>] __schedule+0x134/0x9f0
[ 825.616411] softirqs last enabled at (7630): [<ffffcd7707aacea0>] local_bh_enable+0x4/0x30 [ipv6]
[ 825.617019] softirqs last disabled at (7618): [<ffffcd7707aace70>] local_bh_disable+0x4/0x30 [ipv6]
[ 825.617586] ---[ end trace 0000000000000000 ]---
Therefore, deal with the deadlock as suggested by [1], using the
function drm_modeset_backoff().
[1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking
Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221229194638.178712-1-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index c4b73d9dd0409..0d0b6df4df153 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -402,6 +402,7 @@ static void vc4_hdmi_handle_hotplug(struct vc4_hdmi *vc4_hdmi,
{
struct drm_connector *connector = &vc4_hdmi->connector;
struct edid *edid;
+ int ret;
/*
* NOTE: This function should really be called with
@@ -430,7 +431,15 @@ static void vc4_hdmi_handle_hotplug(struct vc4_hdmi *vc4_hdmi,
cec_s_phys_addr_from_edid(vc4_hdmi->cec_adap, edid);
kfree(edid);
- vc4_hdmi_reset_link(connector, ctx);
+ for (;;) {
+ ret = vc4_hdmi_reset_link(connector, ctx);
+ if (ret == -EDEADLK) {
+ drm_modeset_backoff(ctx);
+ continue;
+ }
+
+ break;
+ }
}
static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 275/885] hwmon: (ftsteutates) Fix scaling of measurements
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (273 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 274/885] drm/vc4: drop all currently held locks if deadlock happens Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 276/885] drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init() Greg Kroah-Hartman
` (612 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Armin Wolf, Guenter Roeck, Sasha Levin
From: Armin Wolf <W_Armin@gmx.de>
[ Upstream commit ca8fd8c16a8b77dfcf7f6ce52d2c863220693a78 ]
A user complained that the ftsteutates driver was displaying
bogus values since its introduction. This happens because the
sensor measurements need to be scaled in order to produce
meaningful results:
- the fan speed needs to be multiplied by 60 since its in RPS
- the temperature is in degrees celsius and needs an offset of 64
- the voltage is in 1/256 of 3.3V
The offical datasheet says the voltage needs to be divided by 256,
but this is likely an off-by-one-error, since even the BIOS
devides by 255 (otherwise 3.3V could not be measured).
The voltage channels additionally need a board-specific multiplier,
however this can be done by the driver since its board-specific.
The reason the missing scaling of measurements is the way Fujitsu
used this driver when it was still out-of-tree. Back then, all
scaling was done in userspace by libsensors, even the generic one.
Tested on a Fujitsu DS3401-B1.
Fixes: 08426eda58e0 ("hwmon: Add driver for FTS BMC chip "Teutates"")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20221224041855.83981-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/hwmon/ftsteutates.rst | 4 ++++
drivers/hwmon/ftsteutates.c | 19 +++++++++++++------
2 files changed, 17 insertions(+), 6 deletions(-)
diff --git a/Documentation/hwmon/ftsteutates.rst b/Documentation/hwmon/ftsteutates.rst
index 58a2483d8d0da..198fa8e2819da 100644
--- a/Documentation/hwmon/ftsteutates.rst
+++ b/Documentation/hwmon/ftsteutates.rst
@@ -22,6 +22,10 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and
8 fans. It also contains an integrated watchdog which is currently
implemented in this driver.
+The 4 voltages require a board-specific multiplier, since the BMC can
+only measure voltages up to 3.3V and thus relies on voltage dividers.
+Consult your motherboard manual for details.
+
To clear a temperature or fan alarm, execute the following command with the
correct path to the alarm file::
diff --git a/drivers/hwmon/ftsteutates.c b/drivers/hwmon/ftsteutates.c
index f5b8e724a8ca1..ffa0bb3648775 100644
--- a/drivers/hwmon/ftsteutates.c
+++ b/drivers/hwmon/ftsteutates.c
@@ -12,6 +12,7 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/jiffies.h>
+#include <linux/math.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
@@ -347,13 +348,15 @@ static ssize_t in_value_show(struct device *dev,
{
struct fts_data *data = dev_get_drvdata(dev);
int index = to_sensor_dev_attr(devattr)->index;
- int err;
+ int value, err;
err = fts_update_device(data);
if (err < 0)
return err;
- return sprintf(buf, "%u\n", data->volt[index]);
+ value = DIV_ROUND_CLOSEST(data->volt[index] * 3300, 255);
+
+ return sprintf(buf, "%d\n", value);
}
static ssize_t temp_value_show(struct device *dev,
@@ -361,13 +364,15 @@ static ssize_t temp_value_show(struct device *dev,
{
struct fts_data *data = dev_get_drvdata(dev);
int index = to_sensor_dev_attr(devattr)->index;
- int err;
+ int value, err;
err = fts_update_device(data);
if (err < 0)
return err;
- return sprintf(buf, "%u\n", data->temp_input[index]);
+ value = (data->temp_input[index] - 64) * 1000;
+
+ return sprintf(buf, "%d\n", value);
}
static ssize_t temp_fault_show(struct device *dev,
@@ -436,13 +441,15 @@ static ssize_t fan_value_show(struct device *dev,
{
struct fts_data *data = dev_get_drvdata(dev);
int index = to_sensor_dev_attr(devattr)->index;
- int err;
+ int value, err;
err = fts_update_device(data);
if (err < 0)
return err;
- return sprintf(buf, "%u\n", data->fan_input[index]);
+ value = data->fan_input[index] * 60;
+
+ return sprintf(buf, "%d\n", value);
}
static ssize_t fan_source_show(struct device *dev,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 276/885] drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (274 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 275/885] hwmon: (ftsteutates) Fix scaling of measurements Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 277/885] drm/msm/hdmi: Add missing check for alloc_ordered_workqueue Greg Kroah-Hartman
` (611 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hui Tang, Abhinav Kumar,
Dmitry Baryshkov, Sasha Levin
From: Hui Tang <tanghui20@huawei.com>
[ Upstream commit 21e9a838f505178e109ccb3bf19d7808eb0326f4 ]
Because of the possilble failure of devm_kzalloc(), dpu_wb_conn might
be NULL and will cause null pointer dereference later.
Therefore, it might be better to check it and directly return -ENOMEM.
Fixes: 77b001acdcfe ("drm/msm/dpu: add the writeback connector layer")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/512277/
Link: https://lore.kernel.org/r/20221119055518.179937-1-tanghui20@huawei.com
[DB: fixed typo in commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c
index 088ec990a2f26..2a5a68366582b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c
@@ -70,6 +70,8 @@ int dpu_writeback_init(struct drm_device *dev, struct drm_encoder *enc,
int rc = 0;
dpu_wb_conn = devm_kzalloc(dev->dev, sizeof(*dpu_wb_conn), GFP_KERNEL);
+ if (!dpu_wb_conn)
+ return -ENOMEM;
drm_connector_helper_add(&dpu_wb_conn->base.base, &dpu_wb_conn_helper_funcs);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 277/885] drm/msm/hdmi: Add missing check for alloc_ordered_workqueue
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (275 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 276/885] drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init() Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 278/885] pinctrl: qcom: pinctrl-msm8976: Correct function names for wcss pins Greg Kroah-Hartman
` (610 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Dmitry Baryshkov,
Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit afe4cb96153a0d8003e4e4ebd91b5c543e10df84 ]
Add check for the return value of alloc_ordered_workqueue as it may return
NULL pointer and cause NULL pointer dereference in `hdmi_hdcp.c` and
`hdmi_hpd.c`.
Fixes: c6a57a50ad56 ("drm/msm/hdmi: add hdmi hdcp support (V3)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517211/
Link: https://lore.kernel.org/r/20230106023011.3985-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 8cd5d50639a53..333cedc11f215 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -255,6 +255,10 @@ static struct hdmi *msm_hdmi_init(struct platform_device *pdev)
devm_pm_runtime_enable(&pdev->dev);
hdmi->workq = alloc_ordered_workqueue("msm_hdmi", 0);
+ if (!hdmi->workq) {
+ ret = -ENOMEM;
+ goto fail;
+ }
hdmi->i2c = msm_hdmi_i2c_init(hdmi);
if (IS_ERR(hdmi->i2c)) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 278/885] pinctrl: qcom: pinctrl-msm8976: Correct function names for wcss pins
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (276 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 277/885] drm/msm/hdmi: Add missing check for alloc_ordered_workqueue Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 279/885] pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain Greg Kroah-Hartman
` (609 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Adam Skladowski, Marijn Suijten,
Linus Walleij, Sasha Levin
From: Adam Skladowski <a39.skl@gmail.com>
[ Upstream commit a7cc0e2685082a0d79baec02df184dfa83cbfac3 ]
Adjust names of function for wcss pins, also fix third gpio in bt group.
Fixes: bcd11493f0ab ("pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20221231164250.74550-1-a39.skl@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/qcom/pinctrl-msm8976.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8976.c b/drivers/pinctrl/qcom/pinctrl-msm8976.c
index ec43edf9b660a..e11d845847190 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm8976.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8976.c
@@ -733,7 +733,7 @@ static const char * const codec_int2_groups[] = {
"gpio74",
};
static const char * const wcss_bt_groups[] = {
- "gpio39", "gpio47", "gpio88",
+ "gpio39", "gpio47", "gpio48",
};
static const char * const sdc3_groups[] = {
"gpio39", "gpio40", "gpio41",
@@ -958,9 +958,9 @@ static const struct msm_pingroup msm8976_groups[] = {
PINGROUP(37, NA, NA, NA, qdss_tracedata_b, NA, NA, NA, NA, NA),
PINGROUP(38, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b, NA),
PINGROUP(39, wcss_bt, sdc3, NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
- PINGROUP(40, wcss_wlan, sdc3, NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
- PINGROUP(41, wcss_wlan, sdc3, NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
- PINGROUP(42, wcss_wlan, sdc3, NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
+ PINGROUP(40, wcss_wlan2, sdc3, NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
+ PINGROUP(41, wcss_wlan1, sdc3, NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
+ PINGROUP(42, wcss_wlan0, sdc3, NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
PINGROUP(43, wcss_wlan, sdc3, NA, NA, qdss_tracedata_a, NA, NA, NA, NA),
PINGROUP(44, wcss_wlan, sdc3, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(45, wcss_fm, NA, qdss_tracectl_a, NA, NA, NA, NA, NA, NA),
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 279/885] pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (277 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 278/885] pinctrl: qcom: pinctrl-msm8976: Correct function names for wcss pins Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 280/885] pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups Greg Kroah-Hartman
` (608 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miaoqian Lin, Linus Walleij, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit dcef18c8ac40aa85bb339f64c1dd31dd458b06fb ]
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: d86f4d71e42a ("pinctrl: stm32: check irq controller availability at probe")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102082503.3944927-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/stm32/pinctrl-stm32.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index e485506ea599c..e198233c10bad 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -1380,6 +1380,7 @@ static struct irq_domain *stm32_pctrl_get_irq_domain(struct platform_device *pde
return ERR_PTR(-ENXIO);
domain = irq_find_host(parent);
+ of_node_put(parent);
if (!domain)
/* domain not registered yet */
return ERR_PTR(-EPROBE_DEFER);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 280/885] pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (278 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 279/885] pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 281/885] drm/vc4: hvs: Set AXI panic modes Greg Kroah-Hartman
` (607 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miaoqian Lin, Linus Walleij, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit c818ae563bf99457f02e8170aabd6b174f629f65 ]
of_find_node_by_phandle() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: d3e5116119bd ("pinctrl: add pinctrl driver for Rockchip SoCs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102112845.3982407-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/pinctrl-rockchip.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 5eeac92f610a0..0276b52f37168 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -3045,6 +3045,7 @@ static int rockchip_pinctrl_parse_groups(struct device_node *np,
np_config = of_find_node_by_phandle(be32_to_cpup(phandle));
ret = pinconf_generic_parse_dt_config(np_config, NULL,
&grp->data[j].configs, &grp->data[j].nconfigs);
+ of_node_put(np_config);
if (ret)
return ret;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 281/885] drm/vc4: hvs: Set AXI panic modes
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (279 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 280/885] pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 282/885] drm/vc4: hvs: SCALER_DISPBKGND_AUTOHS is only valid on HVS4 Greg Kroah-Hartman
` (606 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dave Stevenson, Maxime Ripard, Sasha Levin
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
[ Upstream commit df993fced230daa8452892406f3180c93ebf7e7b ]
The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-2-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/vc4/vc4_hvs.c | 11 +++++++++++
drivers/gpu/drm/vc4/vc4_regs.h | 6 ++++++
2 files changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index 4ac9f5a2d5f99..ee55520c2f11d 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -884,6 +884,17 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
SCALER_DISPCTRL_DSPEISLUR(2) |
SCALER_DISPCTRL_SCLEIRQ);
+ /* Set AXI panic mode.
+ * VC4 panics when < 2 lines in FIFO.
+ * VC5 panics when less than 1 line in the FIFO.
+ */
+ dispctrl &= ~(SCALER_DISPCTRL_PANIC0_MASK |
+ SCALER_DISPCTRL_PANIC1_MASK |
+ SCALER_DISPCTRL_PANIC2_MASK);
+ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC0);
+ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC1);
+ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC2);
+
HVS_WRITE(SCALER_DISPCTRL, dispctrl);
ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index f0290fad991de..f121905c404d1 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -220,6 +220,12 @@
#define SCALER_DISPCTRL 0x00000000
/* Global register for clock gating the HVS */
# define SCALER_DISPCTRL_ENABLE BIT(31)
+# define SCALER_DISPCTRL_PANIC0_MASK VC4_MASK(25, 24)
+# define SCALER_DISPCTRL_PANIC0_SHIFT 24
+# define SCALER_DISPCTRL_PANIC1_MASK VC4_MASK(27, 26)
+# define SCALER_DISPCTRL_PANIC1_SHIFT 26
+# define SCALER_DISPCTRL_PANIC2_MASK VC4_MASK(29, 28)
+# define SCALER_DISPCTRL_PANIC2_SHIFT 28
# define SCALER_DISPCTRL_DSP3_MUX_MASK VC4_MASK(19, 18)
# define SCALER_DISPCTRL_DSP3_MUX_SHIFT 18
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 282/885] drm/vc4: hvs: SCALER_DISPBKGND_AUTOHS is only valid on HVS4
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (280 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 281/885] drm/vc4: hvs: Set AXI panic modes Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 283/885] drm/vc4: hvs: Correct interrupt masking bit assignment for HVS5 Greg Kroah-Hartman
` (605 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dave Stevenson, Maxime Ripard, Sasha Levin
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
[ Upstream commit 982ee94486863a41c6af9f2ab3f6681f72bc5c48 ]
The bit used for SCALER_DISPBKGND_AUTOHS in SCALER_DISPBKGNDX
has been repurposed on HVS5 to configure whether a display can
win back-to-back arbitration wins for the COB.
This is not desirable, therefore only select this bit on HVS4,
and explicitly clear it on HVS5.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-3-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/vc4/vc4_hvs.c | 10 ++++++----
drivers/gpu/drm/vc4/vc4_regs.h | 1 +
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index ee55520c2f11d..413ebb6f56a23 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -368,28 +368,30 @@ static int vc4_hvs_init_channel(struct vc4_hvs *hvs, struct drm_crtc *crtc,
* mode.
*/
dispctrl = SCALER_DISPCTRLX_ENABLE;
+ dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(chan));
- if (!vc4->is_vc5)
+ if (!vc4->is_vc5) {
dispctrl |= VC4_SET_FIELD(mode->hdisplay,
SCALER_DISPCTRLX_WIDTH) |
VC4_SET_FIELD(mode->vdisplay,
SCALER_DISPCTRLX_HEIGHT) |
(oneshot ? SCALER_DISPCTRLX_ONESHOT : 0);
- else
+ dispbkgndx |= SCALER_DISPBKGND_AUTOHS;
+ } else {
dispctrl |= VC4_SET_FIELD(mode->hdisplay,
SCALER5_DISPCTRLX_WIDTH) |
VC4_SET_FIELD(mode->vdisplay,
SCALER5_DISPCTRLX_HEIGHT) |
(oneshot ? SCALER5_DISPCTRLX_ONESHOT : 0);
+ dispbkgndx &= ~SCALER5_DISPBKGND_BCK2BCK;
+ }
HVS_WRITE(SCALER_DISPCTRLX(chan), dispctrl);
- dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(chan));
dispbkgndx &= ~SCALER_DISPBKGND_GAMMA;
dispbkgndx &= ~SCALER_DISPBKGND_INTERLACE;
HVS_WRITE(SCALER_DISPBKGNDX(chan), dispbkgndx |
- SCALER_DISPBKGND_AUTOHS |
((!vc4->is_vc5) ? SCALER_DISPBKGND_GAMMA : 0) |
(interlace ? SCALER_DISPBKGND_INTERLACE : 0));
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index f121905c404d1..95deacdc31e77 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -366,6 +366,7 @@
#define SCALER_DISPBKGND0 0x00000044
# define SCALER_DISPBKGND_AUTOHS BIT(31)
+# define SCALER5_DISPBKGND_BCK2BCK BIT(31)
# define SCALER_DISPBKGND_INTERLACE BIT(30)
# define SCALER_DISPBKGND_GAMMA BIT(29)
# define SCALER_DISPBKGND_TESTMODE_MASK VC4_MASK(28, 25)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 283/885] drm/vc4: hvs: Correct interrupt masking bit assignment for HVS5
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (281 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 282/885] drm/vc4: hvs: SCALER_DISPBKGND_AUTOHS is only valid on HVS4 Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 284/885] drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5 Greg Kroah-Hartman
` (604 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dave Stevenson, Maxime Ripard, Sasha Levin
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
[ Upstream commit 87551ec650bb87d35f1b29bba6a2430896e08da0 ]
HVS5 has moved the interrupt enable bits around within the
DISPCTRL register, therefore the configuration has to be updated
to account for this.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-4-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/vc4/vc4_hvs.c | 52 +++++++++++++++++++++++-----------
drivers/gpu/drm/vc4/vc4_regs.h | 10 +++++--
2 files changed, 44 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index 413ebb6f56a23..47990ecbfc4df 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -658,7 +658,8 @@ void vc4_hvs_mask_underrun(struct vc4_hvs *hvs, int channel)
return;
dispctrl = HVS_READ(SCALER_DISPCTRL);
- dispctrl &= ~SCALER_DISPCTRL_DSPEISLUR(channel);
+ dispctrl &= ~(hvs->vc4->is_vc5 ? SCALER5_DISPCTRL_DSPEISLUR(channel) :
+ SCALER_DISPCTRL_DSPEISLUR(channel));
HVS_WRITE(SCALER_DISPCTRL, dispctrl);
@@ -675,7 +676,8 @@ void vc4_hvs_unmask_underrun(struct vc4_hvs *hvs, int channel)
return;
dispctrl = HVS_READ(SCALER_DISPCTRL);
- dispctrl |= SCALER_DISPCTRL_DSPEISLUR(channel);
+ dispctrl |= (hvs->vc4->is_vc5 ? SCALER5_DISPCTRL_DSPEISLUR(channel) :
+ SCALER_DISPCTRL_DSPEISLUR(channel));
HVS_WRITE(SCALER_DISPSTAT,
SCALER_DISPSTAT_EUFLOW(channel));
@@ -701,6 +703,7 @@ static irqreturn_t vc4_hvs_irq_handler(int irq, void *data)
int channel;
u32 control;
u32 status;
+ u32 dspeislur;
/*
* NOTE: We don't need to protect the register access using
@@ -717,9 +720,11 @@ static irqreturn_t vc4_hvs_irq_handler(int irq, void *data)
control = HVS_READ(SCALER_DISPCTRL);
for (channel = 0; channel < SCALER_CHANNELS_COUNT; channel++) {
+ dspeislur = vc4->is_vc5 ? SCALER5_DISPCTRL_DSPEISLUR(channel) :
+ SCALER_DISPCTRL_DSPEISLUR(channel);
/* Interrupt masking is not always honored, so check it here. */
if (status & SCALER_DISPSTAT_EUFLOW(channel) &&
- control & SCALER_DISPCTRL_DSPEISLUR(channel)) {
+ control & dspeislur) {
vc4_hvs_mask_underrun(hvs, channel);
vc4_hvs_report_underrun(dev);
@@ -872,19 +877,34 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
SCALER_DISPCTRL_DISPEIRQ(1) |
SCALER_DISPCTRL_DISPEIRQ(2);
- dispctrl &= ~(SCALER_DISPCTRL_DMAEIRQ |
- SCALER_DISPCTRL_SLVWREIRQ |
- SCALER_DISPCTRL_SLVRDEIRQ |
- SCALER_DISPCTRL_DSPEIEOF(0) |
- SCALER_DISPCTRL_DSPEIEOF(1) |
- SCALER_DISPCTRL_DSPEIEOF(2) |
- SCALER_DISPCTRL_DSPEIEOLN(0) |
- SCALER_DISPCTRL_DSPEIEOLN(1) |
- SCALER_DISPCTRL_DSPEIEOLN(2) |
- SCALER_DISPCTRL_DSPEISLUR(0) |
- SCALER_DISPCTRL_DSPEISLUR(1) |
- SCALER_DISPCTRL_DSPEISLUR(2) |
- SCALER_DISPCTRL_SCLEIRQ);
+ if (!vc4->is_vc5)
+ dispctrl &= ~(SCALER_DISPCTRL_DMAEIRQ |
+ SCALER_DISPCTRL_SLVWREIRQ |
+ SCALER_DISPCTRL_SLVRDEIRQ |
+ SCALER_DISPCTRL_DSPEIEOF(0) |
+ SCALER_DISPCTRL_DSPEIEOF(1) |
+ SCALER_DISPCTRL_DSPEIEOF(2) |
+ SCALER_DISPCTRL_DSPEIEOLN(0) |
+ SCALER_DISPCTRL_DSPEIEOLN(1) |
+ SCALER_DISPCTRL_DSPEIEOLN(2) |
+ SCALER_DISPCTRL_DSPEISLUR(0) |
+ SCALER_DISPCTRL_DSPEISLUR(1) |
+ SCALER_DISPCTRL_DSPEISLUR(2) |
+ SCALER_DISPCTRL_SCLEIRQ);
+ else
+ dispctrl &= ~(SCALER_DISPCTRL_DMAEIRQ |
+ SCALER5_DISPCTRL_SLVEIRQ |
+ SCALER5_DISPCTRL_DSPEIEOF(0) |
+ SCALER5_DISPCTRL_DSPEIEOF(1) |
+ SCALER5_DISPCTRL_DSPEIEOF(2) |
+ SCALER5_DISPCTRL_DSPEIEOLN(0) |
+ SCALER5_DISPCTRL_DSPEIEOLN(1) |
+ SCALER5_DISPCTRL_DSPEIEOLN(2) |
+ SCALER5_DISPCTRL_DSPEISLUR(0) |
+ SCALER5_DISPCTRL_DSPEISLUR(1) |
+ SCALER5_DISPCTRL_DSPEISLUR(2) |
+ SCALER_DISPCTRL_SCLEIRQ);
+
/* Set AXI panic mode.
* VC4 panics when < 2 lines in FIFO.
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 95deacdc31e77..1256f0877ff66 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -234,15 +234,21 @@
* always enabled.
*/
# define SCALER_DISPCTRL_DSPEISLUR(x) BIT(13 + (x))
+# define SCALER5_DISPCTRL_DSPEISLUR(x) BIT(9 + ((x) * 4))
/* Enables Display 0 end-of-line-N contribution to
* SCALER_DISPSTAT_IRQDISP0
*/
# define SCALER_DISPCTRL_DSPEIEOLN(x) BIT(8 + ((x) * 2))
+# define SCALER5_DISPCTRL_DSPEIEOLN(x) BIT(8 + ((x) * 4))
/* Enables Display 0 EOF contribution to SCALER_DISPSTAT_IRQDISP0 */
# define SCALER_DISPCTRL_DSPEIEOF(x) BIT(7 + ((x) * 2))
+# define SCALER5_DISPCTRL_DSPEIEOF(x) BIT(7 + ((x) * 4))
-# define SCALER_DISPCTRL_SLVRDEIRQ BIT(6)
-# define SCALER_DISPCTRL_SLVWREIRQ BIT(5)
+# define SCALER5_DISPCTRL_DSPEIVST(x) BIT(6 + ((x) * 4))
+
+# define SCALER_DISPCTRL_SLVRDEIRQ BIT(6) /* HVS4 only */
+# define SCALER_DISPCTRL_SLVWREIRQ BIT(5) /* HVS4 only */
+# define SCALER5_DISPCTRL_SLVEIRQ BIT(5)
# define SCALER_DISPCTRL_DMAEIRQ BIT(4)
/* Enables interrupt generation on the enabled EOF/EOLN/EISLUR
* bits and short frames..
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 284/885] drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (282 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 283/885] drm/vc4: hvs: Correct interrupt masking bit assignment for HVS5 Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 285/885] drm/vc4: hdmi: Correct interlaced timings again Greg Kroah-Hartman
` (603 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dave Stevenson, Maxime Ripard, Sasha Levin
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
[ Upstream commit 902973dc1a049c0d7bf0c222b8f2b3876f01b4a2 ]
Same as the xRGB8888 formats, HVS5 has managed to swap the colour
channels for the xRGB1555 formats as well. Add the relevant
config for pixel_order_hvs5.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-6-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/vc4/vc4_plane.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index bd5acc4a86876..eb08020154f30 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -75,11 +75,13 @@ static const struct hvs_format {
.drm = DRM_FORMAT_ARGB1555,
.hvs = HVS_PIXEL_FORMAT_RGBA5551,
.pixel_order = HVS_PIXEL_ORDER_ABGR,
+ .pixel_order_hvs5 = HVS_PIXEL_ORDER_ARGB,
},
{
.drm = DRM_FORMAT_XRGB1555,
.hvs = HVS_PIXEL_FORMAT_RGBA5551,
.pixel_order = HVS_PIXEL_ORDER_ABGR,
+ .pixel_order_hvs5 = HVS_PIXEL_ORDER_ARGB,
},
{
.drm = DRM_FORMAT_RGB888,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 285/885] drm/vc4: hdmi: Correct interlaced timings again
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (283 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 284/885] drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5 Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 286/885] drm/msm: clean event_thread->worker in case of an error Greg Kroah-Hartman
` (602 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dave Stevenson, Maxime Ripard, Sasha Levin
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
[ Upstream commit 771d6539f27bd55f43d8a95d53a7eeaaffa2681c ]
The back porch timings were correct, only the sync offset was wrong.
Correct timing is now reported for 1080i and 576i, but the h offset is
incorrect for 480i for non-obvious reasons.
Fixes: fb10dc451c0f ("drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-14-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 0d0b6df4df153..ea2eaf6032caa 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1306,11 +1306,12 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
VC4_SET_FIELD(mode->crtc_vdisplay, VC5_HDMI_VERTA_VAL));
u32 vertb = (VC4_SET_FIELD(mode->htotal >> (2 - pixel_rep),
VC5_HDMI_VERTB_VSPO) |
- VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end,
+ VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end +
+ interlaced,
VC4_HDMI_VERTB_VBP));
u32 vertb_even = (VC4_SET_FIELD(0, VC5_HDMI_VERTB_VSPO) |
VC4_SET_FIELD(mode->crtc_vtotal -
- mode->crtc_vsync_end - interlaced,
+ mode->crtc_vsync_end,
VC4_HDMI_VERTB_VBP));
unsigned long flags;
unsigned char gcp;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 286/885] drm/msm: clean event_thread->worker in case of an error
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (284 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 285/885] drm/vc4: hdmi: Correct interlaced timings again Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 287/885] drm/panel-edp: fix name for IVO product id 854b Greg Kroah-Hartman
` (601 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Baryshkov, Abhinav Kumar,
Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit c79bb6b92defdcb834ceeeed9c1cf591beb1b71a ]
If worker creation fails, nullify the event_thread->worker, so that
msm_drm_uninit() doesn't try accessing invalid memory location. While we
are at it, remove duplicate assignment to the ret variable.
Fixes: 1041dee2178f ("drm/msm: use kthread_create_worker instead of kthread_run")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/490106/
Link: https://lore.kernel.org/r/20220617233328.1143665-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/msm_drv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index 681c1b889b31a..5a0ff112634b7 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -494,7 +494,7 @@ static int msm_drm_init(struct device *dev, const struct drm_driver *drv)
if (IS_ERR(priv->event_thread[i].worker)) {
ret = PTR_ERR(priv->event_thread[i].worker);
DRM_DEV_ERROR(dev, "failed to create crtc_event kthread\n");
- ret = PTR_ERR(priv->event_thread[i].worker);
+ priv->event_thread[i].worker = NULL;
goto err_msm_uninit;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 287/885] drm/panel-edp: fix name for IVO product id 854b
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (285 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 286/885] drm/msm: clean event_thread->worker in case of an error Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 288/885] scsi: qla2xxx: Fix exchange oversubscription Greg Kroah-Hartman
` (600 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Abel Vesa, Johan Hovold,
Steev Klimaszewski, Douglas Anderson, Sasha Levin
From: Abel Vesa <abel.vesa@linaro.org>
[ Upstream commit 9cce08cadc6ce8670280d0a042cf0b6d2987d9f9 ]
The actual name is R133NW4K-R0.
Fixes: 0f9fa5f58c78 ("drm/panel-edp: add IVO M133NW4J-R3 panel entry")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221231142721.338643-1-abel.vesa@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/panel/panel-edp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 4b39d1dd9140e..a163585a2a52b 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -1889,7 +1889,7 @@ static const struct edp_panel_entry edp_panels[] = {
EDP_PANEL_ENTRY('C', 'M', 'N', 0x1247, &delay_200_500_e80_d50, "N120ACA-EA1"),
EDP_PANEL_ENTRY('I', 'V', 'O', 0x057d, &delay_200_500_e200, "R140NWF5 RH"),
- EDP_PANEL_ENTRY('I', 'V', 'O', 0x854b, &delay_200_500_p2e100, "M133NW4J-R3"),
+ EDP_PANEL_ENTRY('I', 'V', 'O', 0x854b, &delay_200_500_p2e100, "R133NW4K-R0"),
EDP_PANEL_ENTRY('K', 'D', 'B', 0x0624, &kingdisplay_kd116n21_30nv_a010.delay, "116N21-30NV-A010"),
EDP_PANEL_ENTRY('K', 'D', 'B', 0x1120, &delay_200_500_e80_d50, "116N29-30NK-C007"),
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 288/885] scsi: qla2xxx: Fix exchange oversubscription
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (286 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 287/885] drm/panel-edp: fix name for IVO product id 854b Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 289/885] scsi: qla2xxx: Fix exchange oversubscription for management commands Greg Kroah-Hartman
` (599 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Quinn Tran, Nilesh Javali,
Himanshu Madhani, Martin K. Petersen, Sasha Levin
From: Quinn Tran <qutran@marvell.com>
[ Upstream commit 41e5afe51f75f2858f5563145348f6c26d307b8f ]
In large environment, it is possible to experience command timeout and
escalation of path recovery. Currently the driver does not track the number
of exchanges/commands sent to FW. If there is a delay for commands at the
head of the queue, then this will create back pressure for commands at the
back of the queue.
Check for exchange availability before command submission.
Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/qla2xxx/qla_def.h | 6 +++-
drivers/scsi/qla2xxx/qla_edif.c | 7 +++--
drivers/scsi/qla2xxx/qla_init.c | 13 ++++++++
drivers/scsi/qla2xxx/qla_inline.h | 52 +++++++++++++++++++++----------
drivers/scsi/qla2xxx/qla_iocb.c | 28 ++++++++++-------
drivers/scsi/qla2xxx/qla_isr.c | 3 +-
drivers/scsi/qla2xxx/qla_nvme.c | 15 ++++++++-
7 files changed, 88 insertions(+), 36 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index a26a373be9da3..cd4eb11b07079 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -660,7 +660,7 @@ enum {
struct iocb_resource {
u8 res_type;
- u8 pad;
+ u8 exch_cnt;
u16 iocb_cnt;
};
@@ -3721,6 +3721,10 @@ struct qla_fw_resources {
u16 iocbs_limit;
u16 iocbs_qp_limit;
u16 iocbs_used;
+ u16 exch_total;
+ u16 exch_limit;
+ u16 exch_used;
+ u16 pad;
};
#define QLA_IOCB_PCT_LIMIT 95
diff --git a/drivers/scsi/qla2xxx/qla_edif.c b/drivers/scsi/qla2xxx/qla_edif.c
index 00ccc41cef147..d17ba6275b685 100644
--- a/drivers/scsi/qla2xxx/qla_edif.c
+++ b/drivers/scsi/qla2xxx/qla_edif.c
@@ -2989,9 +2989,10 @@ qla28xx_start_scsi_edif(srb_t *sp)
tot_dsds = nseg;
req_cnt = qla24xx_calc_iocbs(vha, tot_dsds);
- sp->iores.res_type = RESOURCE_INI;
+ sp->iores.res_type = RESOURCE_IOCB | RESOURCE_EXCH;
+ sp->iores.exch_cnt = 1;
sp->iores.iocb_cnt = req_cnt;
- if (qla_get_iocbs(sp->qpair, &sp->iores))
+ if (qla_get_fw_resources(sp->qpair, &sp->iores))
goto queuing_error;
if (req->cnt < (req_cnt + 2)) {
@@ -3185,7 +3186,7 @@ qla28xx_start_scsi_edif(srb_t *sp)
mempool_free(sp->u.scmd.ct6_ctx, ha->ctx_mempool);
sp->u.scmd.ct6_ctx = NULL;
}
- qla_put_iocbs(sp->qpair, &sp->iores);
+ qla_put_fw_resources(sp->qpair, &sp->iores);
spin_unlock_irqrestore(lock, flags);
return QLA_FUNCTION_FAILED;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 432f47fc5e1f3..66e8a2e5dfaf6 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -128,12 +128,14 @@ static void qla24xx_abort_iocb_timeout(void *data)
sp->cmd_sp)) {
qpair->req->outstanding_cmds[handle] = NULL;
cmdsp_found = 1;
+ qla_put_fw_resources(qpair, &sp->cmd_sp->iores);
}
/* removing the abort */
if (qpair->req->outstanding_cmds[handle] == sp) {
qpair->req->outstanding_cmds[handle] = NULL;
sp_found = 1;
+ qla_put_fw_resources(qpair, &sp->iores);
break;
}
}
@@ -2000,6 +2002,7 @@ qla2x00_tmf_iocb_timeout(void *data)
for (h = 1; h < sp->qpair->req->num_outstanding_cmds; h++) {
if (sp->qpair->req->outstanding_cmds[h] == sp) {
sp->qpair->req->outstanding_cmds[h] = NULL;
+ qla_put_fw_resources(sp->qpair, &sp->iores);
break;
}
}
@@ -3943,6 +3946,12 @@ void qla_init_iocb_limit(scsi_qla_host_t *vha)
ha->base_qpair->fwres.iocbs_limit = limit;
ha->base_qpair->fwres.iocbs_qp_limit = limit / num_qps;
ha->base_qpair->fwres.iocbs_used = 0;
+
+ ha->base_qpair->fwres.exch_total = ha->orig_fw_xcb_count;
+ ha->base_qpair->fwres.exch_limit = (ha->orig_fw_xcb_count *
+ QLA_IOCB_PCT_LIMIT) / 100;
+ ha->base_qpair->fwres.exch_used = 0;
+
for (i = 0; i < ha->max_qpairs; i++) {
if (ha->queue_pair_map[i]) {
ha->queue_pair_map[i]->fwres.iocbs_total =
@@ -3951,6 +3960,10 @@ void qla_init_iocb_limit(scsi_qla_host_t *vha)
ha->queue_pair_map[i]->fwres.iocbs_qp_limit =
limit / num_qps;
ha->queue_pair_map[i]->fwres.iocbs_used = 0;
+ ha->queue_pair_map[i]->fwres.exch_total = ha->orig_fw_xcb_count;
+ ha->queue_pair_map[i]->fwres.exch_limit =
+ (ha->orig_fw_xcb_count * QLA_IOCB_PCT_LIMIT) / 100;
+ ha->queue_pair_map[i]->fwres.exch_used = 0;
}
}
}
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 5185dc5daf80d..2d5a275d8b000 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -380,13 +380,16 @@ qla2xxx_get_fc4_priority(struct scsi_qla_host *vha)
enum {
RESOURCE_NONE,
- RESOURCE_INI,
+ RESOURCE_IOCB = BIT_0,
+ RESOURCE_EXCH = BIT_1, /* exchange */
+ RESOURCE_FORCE = BIT_2,
};
static inline int
-qla_get_iocbs(struct qla_qpair *qp, struct iocb_resource *iores)
+qla_get_fw_resources(struct qla_qpair *qp, struct iocb_resource *iores)
{
u16 iocbs_used, i;
+ u16 exch_used;
struct qla_hw_data *ha = qp->vha->hw;
if (!ql2xenforce_iocb_limit) {
@@ -394,10 +397,7 @@ qla_get_iocbs(struct qla_qpair *qp, struct iocb_resource *iores)
return 0;
}
- if ((iores->iocb_cnt + qp->fwres.iocbs_used) < qp->fwres.iocbs_qp_limit) {
- qp->fwres.iocbs_used += iores->iocb_cnt;
- return 0;
- } else {
+ if ((iores->iocb_cnt + qp->fwres.iocbs_used) >= qp->fwres.iocbs_qp_limit) {
/* no need to acquire qpair lock. It's just rough calculation */
iocbs_used = ha->base_qpair->fwres.iocbs_used;
for (i = 0; i < ha->max_qpairs; i++) {
@@ -405,30 +405,48 @@ qla_get_iocbs(struct qla_qpair *qp, struct iocb_resource *iores)
iocbs_used += ha->queue_pair_map[i]->fwres.iocbs_used;
}
- if ((iores->iocb_cnt + iocbs_used) < qp->fwres.iocbs_limit) {
- qp->fwres.iocbs_used += iores->iocb_cnt;
- return 0;
- } else {
+ if ((iores->iocb_cnt + iocbs_used) >= qp->fwres.iocbs_limit) {
+ iores->res_type = RESOURCE_NONE;
+ return -ENOSPC;
+ }
+ }
+
+ if (iores->res_type & RESOURCE_EXCH) {
+ exch_used = ha->base_qpair->fwres.exch_used;
+ for (i = 0; i < ha->max_qpairs; i++) {
+ if (ha->queue_pair_map[i])
+ exch_used += ha->queue_pair_map[i]->fwres.exch_used;
+ }
+
+ if ((exch_used + iores->exch_cnt) >= qp->fwres.exch_limit) {
iores->res_type = RESOURCE_NONE;
return -ENOSPC;
}
}
+ qp->fwres.iocbs_used += iores->iocb_cnt;
+ qp->fwres.exch_used += iores->exch_cnt;
+ return 0;
}
static inline void
-qla_put_iocbs(struct qla_qpair *qp, struct iocb_resource *iores)
+qla_put_fw_resources(struct qla_qpair *qp, struct iocb_resource *iores)
{
- switch (iores->res_type) {
- case RESOURCE_NONE:
- break;
- default:
+ if (iores->res_type & RESOURCE_IOCB) {
if (qp->fwres.iocbs_used >= iores->iocb_cnt) {
qp->fwres.iocbs_used -= iores->iocb_cnt;
} else {
- // should not happen
+ /* should not happen */
qp->fwres.iocbs_used = 0;
}
- break;
+ }
+
+ if (iores->res_type & RESOURCE_EXCH) {
+ if (qp->fwres.exch_used >= iores->exch_cnt) {
+ qp->fwres.exch_used -= iores->exch_cnt;
+ } else {
+ /* should not happen */
+ qp->fwres.exch_used = 0;
+ }
}
iores->res_type = RESOURCE_NONE;
}
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 42ce4e1fe7441..399ec8da2d73c 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1589,9 +1589,10 @@ qla24xx_start_scsi(srb_t *sp)
tot_dsds = nseg;
req_cnt = qla24xx_calc_iocbs(vha, tot_dsds);
- sp->iores.res_type = RESOURCE_INI;
+ sp->iores.res_type = RESOURCE_IOCB | RESOURCE_EXCH;
+ sp->iores.exch_cnt = 1;
sp->iores.iocb_cnt = req_cnt;
- if (qla_get_iocbs(sp->qpair, &sp->iores))
+ if (qla_get_fw_resources(sp->qpair, &sp->iores))
goto queuing_error;
if (req->cnt < (req_cnt + 2)) {
@@ -1678,7 +1679,7 @@ qla24xx_start_scsi(srb_t *sp)
if (tot_dsds)
scsi_dma_unmap(cmd);
- qla_put_iocbs(sp->qpair, &sp->iores);
+ qla_put_fw_resources(sp->qpair, &sp->iores);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_FUNCTION_FAILED;
@@ -1793,9 +1794,10 @@ qla24xx_dif_start_scsi(srb_t *sp)
tot_prot_dsds = nseg;
tot_dsds += nseg;
- sp->iores.res_type = RESOURCE_INI;
+ sp->iores.res_type = RESOURCE_IOCB | RESOURCE_EXCH;
+ sp->iores.exch_cnt = 1;
sp->iores.iocb_cnt = qla24xx_calc_iocbs(vha, tot_dsds);
- if (qla_get_iocbs(sp->qpair, &sp->iores))
+ if (qla_get_fw_resources(sp->qpair, &sp->iores))
goto queuing_error;
if (req->cnt < (req_cnt + 2)) {
@@ -1883,7 +1885,7 @@ qla24xx_dif_start_scsi(srb_t *sp)
}
/* Cleanup will be performed by the caller (queuecommand) */
- qla_put_iocbs(sp->qpair, &sp->iores);
+ qla_put_fw_resources(sp->qpair, &sp->iores);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_FUNCTION_FAILED;
@@ -1952,9 +1954,10 @@ qla2xxx_start_scsi_mq(srb_t *sp)
tot_dsds = nseg;
req_cnt = qla24xx_calc_iocbs(vha, tot_dsds);
- sp->iores.res_type = RESOURCE_INI;
+ sp->iores.res_type = RESOURCE_IOCB | RESOURCE_EXCH;
+ sp->iores.exch_cnt = 1;
sp->iores.iocb_cnt = req_cnt;
- if (qla_get_iocbs(sp->qpair, &sp->iores))
+ if (qla_get_fw_resources(sp->qpair, &sp->iores))
goto queuing_error;
if (req->cnt < (req_cnt + 2)) {
@@ -2041,7 +2044,7 @@ qla2xxx_start_scsi_mq(srb_t *sp)
if (tot_dsds)
scsi_dma_unmap(cmd);
- qla_put_iocbs(sp->qpair, &sp->iores);
+ qla_put_fw_resources(sp->qpair, &sp->iores);
spin_unlock_irqrestore(&qpair->qp_lock, flags);
return QLA_FUNCTION_FAILED;
@@ -2171,9 +2174,10 @@ qla2xxx_dif_start_scsi_mq(srb_t *sp)
tot_prot_dsds = nseg;
tot_dsds += nseg;
- sp->iores.res_type = RESOURCE_INI;
+ sp->iores.res_type = RESOURCE_IOCB | RESOURCE_EXCH;
+ sp->iores.exch_cnt = 1;
sp->iores.iocb_cnt = qla24xx_calc_iocbs(vha, tot_dsds);
- if (qla_get_iocbs(sp->qpair, &sp->iores))
+ if (qla_get_fw_resources(sp->qpair, &sp->iores))
goto queuing_error;
if (req->cnt < (req_cnt + 2)) {
@@ -2260,7 +2264,7 @@ qla2xxx_dif_start_scsi_mq(srb_t *sp)
}
/* Cleanup will be performed by the caller (queuecommand) */
- qla_put_iocbs(sp->qpair, &sp->iores);
+ qla_put_fw_resources(sp->qpair, &sp->iores);
spin_unlock_irqrestore(&qpair->qp_lock, flags);
return QLA_FUNCTION_FAILED;
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index e19fde304e5c6..42d3d2de3d31f 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -3197,7 +3197,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
}
return;
}
- qla_put_iocbs(sp->qpair, &sp->iores);
+ qla_put_fw_resources(sp->qpair, &sp->iores);
if (sp->cmd_type != TYPE_SRB) {
req->outstanding_cmds[handle] = NULL;
@@ -3618,7 +3618,6 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt)
default:
sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
if (sp) {
- qla_put_iocbs(sp->qpair, &sp->iores);
sp->done(sp, res);
return 0;
}
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index 02fdeb0d31ec4..582d88dd59abe 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -445,13 +445,24 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp)
goto queuing_error;
}
req_cnt = qla24xx_calc_iocbs(vha, tot_dsds);
+
+ sp->iores.res_type = RESOURCE_IOCB | RESOURCE_EXCH;
+ sp->iores.exch_cnt = 1;
+ sp->iores.iocb_cnt = req_cnt;
+ if (qla_get_fw_resources(sp->qpair, &sp->iores)) {
+ rval = -EBUSY;
+ goto queuing_error;
+ }
+
if (req->cnt < (req_cnt + 2)) {
if (IS_SHADOW_REG_CAPABLE(ha)) {
cnt = *req->out_ptr;
} else {
cnt = rd_reg_dword_relaxed(req->req_q_out);
- if (qla2x00_check_reg16_for_disconnect(vha, cnt))
+ if (qla2x00_check_reg16_for_disconnect(vha, cnt)) {
+ rval = -EBUSY;
goto queuing_error;
+ }
}
if (req->ring_index < cnt)
@@ -600,6 +611,8 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp)
qla24xx_process_response_queue(vha, rsp);
queuing_error:
+ if (rval)
+ qla_put_fw_resources(sp->qpair, &sp->iores);
spin_unlock_irqrestore(&qpair->qp_lock, flags);
return rval;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 289/885] scsi: qla2xxx: Fix exchange oversubscription for management commands
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (287 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 288/885] scsi: qla2xxx: Fix exchange oversubscription Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 290/885] scsi: qla2xxx: edif: Fix clang warning Greg Kroah-Hartman
` (598 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Quinn Tran, Nilesh Javali,
Martin K. Petersen, Sasha Levin
From: Quinn Tran <qutran@marvell.com>
[ Upstream commit 5f63a163ed2f12c34dd4ae9b2757962ec7bb86e5 ]
Add resource checking for management (non-I/O) commands.
Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/qla2xxx/qla_dfs.c | 10 ++++-
drivers/scsi/qla2xxx/qla_inline.h | 5 ++-
drivers/scsi/qla2xxx/qla_iocb.c | 67 +++++++++++++++++++++++++++++++
drivers/scsi/qla2xxx/qla_isr.c | 1 +
4 files changed, 80 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c
index 777808af56347..1925cc6897b68 100644
--- a/drivers/scsi/qla2xxx/qla_dfs.c
+++ b/drivers/scsi/qla2xxx/qla_dfs.c
@@ -235,7 +235,7 @@ qla_dfs_fw_resource_cnt_show(struct seq_file *s, void *unused)
uint16_t mb[MAX_IOCB_MB_REG];
int rc;
struct qla_hw_data *ha = vha->hw;
- u16 iocbs_used, i;
+ u16 iocbs_used, i, exch_used;
rc = qla24xx_res_count_wait(vha, mb, SIZEOF_IOCB_MB_REG);
if (rc != QLA_SUCCESS) {
@@ -263,13 +263,19 @@ qla_dfs_fw_resource_cnt_show(struct seq_file *s, void *unused)
if (ql2xenforce_iocb_limit) {
/* lock is not require. It's an estimate. */
iocbs_used = ha->base_qpair->fwres.iocbs_used;
+ exch_used = ha->base_qpair->fwres.exch_used;
for (i = 0; i < ha->max_qpairs; i++) {
- if (ha->queue_pair_map[i])
+ if (ha->queue_pair_map[i]) {
iocbs_used += ha->queue_pair_map[i]->fwres.iocbs_used;
+ exch_used += ha->queue_pair_map[i]->fwres.exch_used;
+ }
}
seq_printf(s, "Driver: estimate iocb used [%d] high water limit [%d]\n",
iocbs_used, ha->base_qpair->fwres.iocbs_limit);
+
+ seq_printf(s, "estimate exchange used[%d] high water limit [%d] n",
+ exch_used, ha->base_qpair->fwres.exch_limit);
}
return 0;
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 2d5a275d8b000..b0ee307b5d4b9 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -380,7 +380,7 @@ qla2xxx_get_fc4_priority(struct scsi_qla_host *vha)
enum {
RESOURCE_NONE,
- RESOURCE_IOCB = BIT_0,
+ RESOURCE_IOCB = BIT_0,
RESOURCE_EXCH = BIT_1, /* exchange */
RESOURCE_FORCE = BIT_2,
};
@@ -396,6 +396,8 @@ qla_get_fw_resources(struct qla_qpair *qp, struct iocb_resource *iores)
iores->res_type = RESOURCE_NONE;
return 0;
}
+ if (iores->res_type & RESOURCE_FORCE)
+ goto force;
if ((iores->iocb_cnt + qp->fwres.iocbs_used) >= qp->fwres.iocbs_qp_limit) {
/* no need to acquire qpair lock. It's just rough calculation */
@@ -423,6 +425,7 @@ qla_get_fw_resources(struct qla_qpair *qp, struct iocb_resource *iores)
return -ENOSPC;
}
}
+force:
qp->fwres.iocbs_used += iores->iocb_cnt;
qp->fwres.exch_used += iores->exch_cnt;
return 0;
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 399ec8da2d73c..4f48f098ea5a6 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -3817,6 +3817,65 @@ qla24xx_prlo_iocb(srb_t *sp, struct logio_entry_24xx *logio)
logio->vp_index = sp->fcport->vha->vp_idx;
}
+int qla_get_iocbs_resource(struct srb *sp)
+{
+ bool get_exch;
+ bool push_it_through = false;
+
+ if (!ql2xenforce_iocb_limit) {
+ sp->iores.res_type = RESOURCE_NONE;
+ return 0;
+ }
+ sp->iores.res_type = RESOURCE_NONE;
+
+ switch (sp->type) {
+ case SRB_TM_CMD:
+ case SRB_PRLI_CMD:
+ case SRB_ADISC_CMD:
+ push_it_through = true;
+ fallthrough;
+ case SRB_LOGIN_CMD:
+ case SRB_ELS_CMD_RPT:
+ case SRB_ELS_CMD_HST:
+ case SRB_ELS_CMD_HST_NOLOGIN:
+ case SRB_CT_CMD:
+ case SRB_NVME_LS:
+ case SRB_ELS_DCMD:
+ get_exch = true;
+ break;
+
+ case SRB_FXIOCB_DCMD:
+ case SRB_FXIOCB_BCMD:
+ sp->iores.res_type = RESOURCE_NONE;
+ return 0;
+
+ case SRB_SA_UPDATE:
+ case SRB_SA_REPLACE:
+ case SRB_MB_IOCB:
+ case SRB_ABT_CMD:
+ case SRB_NACK_PLOGI:
+ case SRB_NACK_PRLI:
+ case SRB_NACK_LOGO:
+ case SRB_LOGOUT_CMD:
+ case SRB_CTRL_VP:
+ push_it_through = true;
+ fallthrough;
+ default:
+ get_exch = false;
+ }
+
+ sp->iores.res_type |= RESOURCE_IOCB;
+ sp->iores.iocb_cnt = 1;
+ if (get_exch) {
+ sp->iores.res_type |= RESOURCE_EXCH;
+ sp->iores.exch_cnt = 1;
+ }
+ if (push_it_through)
+ sp->iores.res_type |= RESOURCE_FORCE;
+
+ return qla_get_fw_resources(sp->qpair, &sp->iores);
+}
+
int
qla2x00_start_sp(srb_t *sp)
{
@@ -3831,6 +3890,12 @@ qla2x00_start_sp(srb_t *sp)
return -EIO;
spin_lock_irqsave(qp->qp_lock_ptr, flags);
+ rval = qla_get_iocbs_resource(sp);
+ if (rval) {
+ spin_unlock_irqrestore(qp->qp_lock_ptr, flags);
+ return -EAGAIN;
+ }
+
pkt = __qla2x00_alloc_iocbs(sp->qpair, sp);
if (!pkt) {
rval = EAGAIN;
@@ -3931,6 +3996,8 @@ qla2x00_start_sp(srb_t *sp)
wmb();
qla2x00_start_iocbs(vha, qp->req);
done:
+ if (rval)
+ qla_put_fw_resources(sp->qpair, &sp->iores);
spin_unlock_irqrestore(qp->qp_lock_ptr, flags);
return rval;
}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 42d3d2de3d31f..759bea69de120 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -3112,6 +3112,7 @@ qla25xx_process_bidir_status_iocb(scsi_qla_host_t *vha, void *pkt,
}
bsg_reply->reply_payload_rcv_len = 0;
+ qla_put_fw_resources(sp->qpair, &sp->iores);
done:
/* Return the vendor specific reply to API */
bsg_reply->reply_data.vendor_reply.vendor_rsp[0] = rval;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 290/885] scsi: qla2xxx: edif: Fix clang warning
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (288 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 289/885] scsi: qla2xxx: Fix exchange oversubscription for management commands Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 291/885] ASoC: fsl_sai: initialize is_dsp_mode flag Greg Kroah-Hartman
` (597 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernel test robot, Quinn Tran,
Nilesh Javali, Martin K. Petersen, Sasha Levin
From: Quinn Tran <qutran@marvell.com>
[ Upstream commit 2f5fab1b6c3a8efc93ba52c28539c45a8d0142ad ]
clang warning:
drivers/scsi/qla2xxx/qla_edif_bsg.h:93:12: warning: field remote_pid
within 'struct app_pinfo_req' is less aligned than 'port_id_t' and is
usually due to 'struct app_pinfo_req' being packed, which can lead to
unaligned accesses [-Wunaligned-access]
port_id_t remote_pid;
^
2 warnings generated.
Remove u32 field in remote_pid to silence warning.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/qla2xxx/qla_edif.c | 4 +++-
drivers/scsi/qla2xxx/qla_edif_bsg.h | 15 ++++++++++++++-
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_edif.c b/drivers/scsi/qla2xxx/qla_edif.c
index d17ba6275b685..1cafd27d5a609 100644
--- a/drivers/scsi/qla2xxx/qla_edif.c
+++ b/drivers/scsi/qla2xxx/qla_edif.c
@@ -925,7 +925,9 @@ qla_edif_app_getfcinfo(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
if (!(fcport->flags & FCF_FCSP_DEVICE))
continue;
- tdid = app_req.remote_pid;
+ tdid.b.domain = app_req.remote_pid.domain;
+ tdid.b.area = app_req.remote_pid.area;
+ tdid.b.al_pa = app_req.remote_pid.al_pa;
ql_dbg(ql_dbg_edif, vha, 0x2058,
"APP request entry - portid=%06x.\n", tdid.b24);
diff --git a/drivers/scsi/qla2xxx/qla_edif_bsg.h b/drivers/scsi/qla2xxx/qla_edif_bsg.h
index 0931f4e4e127a..514c265ba86e2 100644
--- a/drivers/scsi/qla2xxx/qla_edif_bsg.h
+++ b/drivers/scsi/qla2xxx/qla_edif_bsg.h
@@ -89,7 +89,20 @@ struct app_plogi_reply {
struct app_pinfo_req {
struct app_id app_info;
uint8_t num_ports;
- port_id_t remote_pid;
+ struct {
+#ifdef __BIG_ENDIAN
+ uint8_t domain;
+ uint8_t area;
+ uint8_t al_pa;
+#elif defined(__LITTLE_ENDIAN)
+ uint8_t al_pa;
+ uint8_t area;
+ uint8_t domain;
+#else
+#error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined!"
+#endif
+ uint8_t rsvd_1;
+ } remote_pid;
uint8_t version;
uint8_t pad[VND_CMD_PAD_SIZE];
uint8_t reserved[VND_CMD_APP_RESERVED_SIZE];
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 291/885] ASoC: fsl_sai: initialize is_dsp_mode flag
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (289 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 290/885] scsi: qla2xxx: edif: Fix clang warning Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 292/885] drm/bridge: tc358767: Set default CLRSIPO count Greg Kroah-Hartman
` (596 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shengjiu Wang, Iuliana Prodan,
Mark Brown, Sasha Levin
From: Shengjiu Wang <shengjiu.wang@nxp.com>
[ Upstream commit a23924b7dd7b748fff8e305e1daf590fed2af21b ]
Initialize is_dsp_mode flag in the beginning of function
fsl_sai_set_dai_fmt_tr().
When the DAIFMT is DAIFMT_DSP_B the first time, is_dsp_mode is
true, then the second time DAIFMT is DAIFMT_I2S, is_dsp_mode
still true, which is a wrong state. So need to initialize
is_dsp_mode flag every time.
Fixes: a3f7dcc9cc03 ("ASoC: fsl-sai: Add SND_SOC_DAIFMT_DSP_A/B support.")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/1673852874-32200-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/fsl/fsl_sai.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 8205b32171495..df7c0bf372451 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -281,6 +281,7 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai,
val_cr4 |= FSL_SAI_CR4_MF;
sai->is_pdm_mode = false;
+ sai->is_dsp_mode = false;
/* DAI mode */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 292/885] drm/bridge: tc358767: Set default CLRSIPO count
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (290 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 291/885] ASoC: fsl_sai: initialize is_dsp_mode flag Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 293/885] drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup() Greg Kroah-Hartman
` (595 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marek Vasut, Maxime Ripard, Sasha Levin
From: Marek Vasut <marex@denx.de>
[ Upstream commit 01338bb82fed40a6a234c2b36a92367c8671adf0 ]
The current CLRSIPO count is still marginal and does not work with high
DSI clock rates in burst mode. Increase it further to allow the DSI link
to work at up to 1Gbps lane speed. This returns the counts to defaults
as provided by datasheet.
Fixes: ea6490b02240b ("drm/bridge: tc358767: increase CLRSIPO count")
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221016003556.406441-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/bridge/tc358767.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 2a58eb271f701..b9b681086fc49 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1264,10 +1264,10 @@ static int tc_dsi_rx_enable(struct tc_data *tc)
u32 value;
int ret;
- regmap_write(tc->regmap, PPI_D0S_CLRSIPOCOUNT, 5);
- regmap_write(tc->regmap, PPI_D1S_CLRSIPOCOUNT, 5);
- regmap_write(tc->regmap, PPI_D2S_CLRSIPOCOUNT, 5);
- regmap_write(tc->regmap, PPI_D3S_CLRSIPOCOUNT, 5);
+ regmap_write(tc->regmap, PPI_D0S_CLRSIPOCOUNT, 25);
+ regmap_write(tc->regmap, PPI_D1S_CLRSIPOCOUNT, 25);
+ regmap_write(tc->regmap, PPI_D2S_CLRSIPOCOUNT, 25);
+ regmap_write(tc->regmap, PPI_D3S_CLRSIPOCOUNT, 25);
regmap_write(tc->regmap, PPI_D0S_ATMR, 0);
regmap_write(tc->regmap, PPI_D1S_ATMR, 0);
regmap_write(tc->regmap, PPI_TX_RX_TA, TTA_GET | TTA_SURE);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 293/885] drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (291 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 292/885] drm/bridge: tc358767: Set default CLRSIPO count Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 294/885] ALSA: hda/ca0132: minor fix for allocation size Greg Kroah-Hartman
` (594 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Akhil P Oommen, Rob Clark, Sasha Levin
From: Akhil P Oommen <quic_akhilpo@quicinc.com>
[ Upstream commit dbeedbcb268d055d8895aceca427f897e12c2b50 ]
Fix the below kernel panic due to null pointer access:
[ 18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048
[ 18.513464] Mem abort info:
[ 18.516346] ESR = 0x0000000096000005
[ 18.520204] EC = 0x25: DABT (current EL), IL = 32 bits
[ 18.525706] SET = 0, FnV = 0
[ 18.528878] EA = 0, S1PTW = 0
[ 18.532117] FSC = 0x05: level 1 translation fault
[ 18.537138] Data abort info:
[ 18.540110] ISV = 0, ISS = 0x00000005
[ 18.544060] CM = 0, WnR = 0
[ 18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000
[ 18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
**Snip**
[ 18.696758] Call trace:
[ 18.699278] adreno_gpu_cleanup+0x30/0x88
[ 18.703396] a6xx_destroy+0xc0/0x130
[ 18.707066] a6xx_gpu_init+0x308/0x424
[ 18.710921] adreno_bind+0x178/0x288
[ 18.714590] component_bind_all+0xe0/0x214
[ 18.718797] msm_drm_bind+0x1d4/0x614
[ 18.722566] try_to_bring_up_aggregate_device+0x16c/0x1b8
[ 18.728105] __component_add+0xa0/0x158
[ 18.732048] component_add+0x20/0x2c
[ 18.735719] adreno_probe+0x40/0xc0
[ 18.739300] platform_probe+0xb4/0xd4
[ 18.743068] really_probe+0xfc/0x284
[ 18.746738] __driver_probe_device+0xc0/0xec
[ 18.751129] driver_probe_device+0x48/0x110
[ 18.755421] __device_attach_driver+0xa8/0xd0
[ 18.759900] bus_for_each_drv+0x90/0xdc
[ 18.763843] __device_attach+0xfc/0x174
[ 18.767786] device_initial_probe+0x20/0x2c
[ 18.772090] bus_probe_device+0x40/0xa0
[ 18.776032] deferred_probe_work_func+0x94/0xd0
[ 18.780686] process_one_work+0x190/0x3d0
[ 18.784805] worker_thread+0x280/0x3d4
[ 18.788659] kthread+0x104/0x1c0
[ 18.791981] ret_from_fork+0x10/0x20
[ 18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516)
[ 18.801913] ---[ end trace 0000000000000000 ]---
[ 18.809039] Kernel panic - not syncing: Oops: Fatal exception
Fixes: 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}")
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515605/
Link: https://lore.kernel.org/r/20221221203925.v2.1.Ib978de92c4bd000b515486aad72e96c2481f84d0@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 2e7531d2a5d6e..dfd4eec217859 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -1082,13 +1082,13 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev,
void adreno_gpu_cleanup(struct adreno_gpu *adreno_gpu)
{
struct msm_gpu *gpu = &adreno_gpu->base;
- struct msm_drm_private *priv = gpu->dev->dev_private;
+ struct msm_drm_private *priv = gpu->dev ? gpu->dev->dev_private : NULL;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(adreno_gpu->info->fw); i++)
release_firmware(adreno_gpu->fw[i]);
- if (pm_runtime_enabled(&priv->gpu_pdev->dev))
+ if (priv && pm_runtime_enabled(&priv->gpu_pdev->dev))
pm_runtime_disable(&priv->gpu_pdev->dev);
msm_gpu_cleanup(&adreno_gpu->base);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 294/885] ALSA: hda/ca0132: minor fix for allocation size
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (292 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 293/885] drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup() Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 295/885] drm/amdgpu: Use the sched from entity for amdgpu_cs trace Greg Kroah-Hartman
` (593 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexey V. Vissarionov, Takashi Iwai,
Sasha Levin
From: Alexey V. Vissarionov <gremlin@altlinux.org>
[ Upstream commit 3ee0fe7fa39b14d1cea455b7041f2df933bd97d2 ]
Although the "dma_chan" pointer occupies more or equal space compared
to "*dma_chan", the allocation size should use the size of variable
itself.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 01ef7dbffb41 ("ALSA: hda - Update CA0132 codec to load DSP firmware binary")
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Link: https://lore.kernel.org/r/20230117111522.GA15213@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/pci/hda/patch_ca0132.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 0a292bf271f2e..acde4cd58785e 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -2455,7 +2455,7 @@ static int dspio_set_uint_param(struct hda_codec *codec, int mod_id,
static int dspio_alloc_dma_chan(struct hda_codec *codec, unsigned int *dma_chan)
{
int status = 0;
- unsigned int size = sizeof(dma_chan);
+ unsigned int size = sizeof(*dma_chan);
codec_dbg(codec, " dspio_alloc_dma_chan() -- begin\n");
status = dspio_scp(codec, MASTERCONTROL, 0x20,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 295/885] drm/amdgpu: Use the sched from entity for amdgpu_cs trace
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (293 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 294/885] ALSA: hda/ca0132: minor fix for allocation size Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 296/885] drm/msm/gem: Add check for kmalloc Greg Kroah-Hartman
` (592 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Leo Liu, Christian König,
Alex Deucher, Sasha Levin
From: Leo Liu <leo.liu@amd.com>
[ Upstream commit cf22ef78f22ce4df4757472c5dbd33c430c5b659 ]
The problem is that base sched hasn't been assigned yet at this moment,
causing something like "ring=0" all the time from trace.
mpv:cs0-3473 [002] ..... 129.047431: amdgpu_cs: ring=0, dw=48, fences=0
mpv:cs0-3473 [002] ..... 129.089125: amdgpu_cs: ring=0, dw=48, fences=0
mpv:cs0-3473 [002] ..... 129.130987: amdgpu_cs: ring=0, dw=48, fences=0
mpv:cs0-3473 [002] ..... 129.172478: amdgpu_cs: ring=0, dw=48, fences=0
Fixes: 4624459c84d7 ("drm/amdgpu: add gang submit frontend v6")
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h
index 5e6ddc7e101c6..6cd6ea765d37f 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h
@@ -153,10 +153,10 @@ TRACE_EVENT(amdgpu_cs,
TP_fast_assign(
__entry->bo_list = p->bo_list;
- __entry->ring = to_amdgpu_ring(job->base.sched)->idx;
+ __entry->ring = to_amdgpu_ring(job->base.entity->rq->sched)->idx;
__entry->dw = ib->length_dw;
__entry->fences = amdgpu_fence_count_emitted(
- to_amdgpu_ring(job->base.sched));
+ to_amdgpu_ring(job->base.entity->rq->sched));
),
TP_printk("bo_list=%p, ring=%u, dw=%u, fences=%u",
__entry->bo_list, __entry->ring, __entry->dw,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 296/885] drm/msm/gem: Add check for kmalloc
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (294 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 295/885] drm/amdgpu: Use the sched from entity for amdgpu_cs trace Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 297/885] drm/msm/dpu: Disallow unallocated resources to be returned Greg Kroah-Hartman
` (591 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Dmitry Baryshkov,
Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit d839f0811a31322c087a859c2b181e2383daa7be ]
Add the check for the return value of kmalloc in order to avoid
NULL pointer dereference in copy_from_user.
Fixes: 20224d715a88 ("drm/msm/submit: Move copy_from_user ahead of locking bos")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514678/
Link: https://lore.kernel.org/r/20221212091117.43511-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/msm_gem_submit.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c
index 45a3e5cadc7da..7c2cc1262c05d 100644
--- a/drivers/gpu/drm/msm/msm_gem_submit.c
+++ b/drivers/gpu/drm/msm/msm_gem_submit.c
@@ -209,6 +209,10 @@ static int submit_lookup_cmds(struct msm_gem_submit *submit,
goto out;
}
submit->cmd[i].relocs = kmalloc(sz, GFP_KERNEL);
+ if (!submit->cmd[i].relocs) {
+ ret = -ENOMEM;
+ goto out;
+ }
ret = copy_from_user(submit->cmd[i].relocs, userptr, sz);
if (ret) {
ret = -EFAULT;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 297/885] drm/msm/dpu: Disallow unallocated resources to be returned
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (295 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 296/885] drm/msm/gem: Add check for kmalloc Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 298/885] drm/bridge: lt9611: fix sleep mode setup Greg Kroah-Hartman
` (590 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marijn Suijten, Dmitry Baryshkov,
Sasha Levin
From: Marijn Suijten <marijn.suijten@somainline.org>
[ Upstream commit abc40122d9a69f56c04efb5a7485795f5ac799d1 ]
In the event that the topology requests resources that have not been
created by the system (because they are typically not represented in
dpu_mdss_cfg ^1), the resource(s) in global_state (in this case DSC
blocks, until their allocation/assignment is being sanity-checked in
"drm/msm/dpu: Reject topologies for which no DSC blocks are available")
remain NULL but will still be returned out of
dpu_rm_get_assigned_resources, where the caller expects to get an array
containing num_blks valid pointers (but instead gets these NULLs).
To prevent this from happening, where null-pointer dereferences
typically result in a hard-to-debug platform lockup, num_blks shouldn't
increase past NULL blocks and will print an error and break instead.
After all, max_blks represents the static size of the maximum number of
blocks whereas the actual amount varies per platform.
^1: which can happen after a git rebase ended up moving additions to
_dpu_cfg to a different struct which has the same patch context.
Fixes: bb00a452d6f7 ("drm/msm/dpu: Refactor resource manager")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517636/
Link: https://lore.kernel.org/r/20230109231556.344977-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
index 73b3442e74679..7ada957adbbb8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
@@ -660,6 +660,11 @@ int dpu_rm_get_assigned_resources(struct dpu_rm *rm,
blks_size, enc_id);
break;
}
+ if (!hw_blks[i]) {
+ DPU_ERROR("Allocated resource %d unavailable to assign to enc %d\n",
+ type, enc_id);
+ break;
+ }
blks[num_blks++] = hw_blks[i];
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 298/885] drm/bridge: lt9611: fix sleep mode setup
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (296 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 297/885] drm/msm/dpu: Disallow unallocated resources to be returned Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 299/885] drm/bridge: lt9611: fix HPD reenablement Greg Kroah-Hartman
` (589 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Dmitry Baryshkov,
Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit ae2d329f104b75a0a78dcaded29fe6283289cdf9 ]
On atomic_post_disable the bridge goes to the low power state. However
the code disables too much of the chip, so the HPD event is not being
detected and delivered to the host. Reduce the power saving in order to
get the HPD event.
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-2-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/bridge/lontium-lt9611.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c
index 7c0a99173b39f..2714184cc53f4 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611.c
@@ -448,12 +448,11 @@ static void lt9611_sleep_setup(struct lt9611 *lt9611)
{ 0x8023, 0x01 },
{ 0x8157, 0x03 }, /* set addr pin as output */
{ 0x8149, 0x0b },
- { 0x8151, 0x30 }, /* disable IRQ */
+
{ 0x8102, 0x48 }, /* MIPI Rx power down */
{ 0x8123, 0x80 },
{ 0x8130, 0x00 },
- { 0x8100, 0x01 }, /* bandgap power down */
- { 0x8101, 0x00 }, /* system clk power down */
+ { 0x8011, 0x0a },
};
regmap_multi_reg_write(lt9611->regmap,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 299/885] drm/bridge: lt9611: fix HPD reenablement
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (297 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 298/885] drm/bridge: lt9611: fix sleep mode setup Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 300/885] drm/bridge: lt9611: fix polarity programming Greg Kroah-Hartman
` (588 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Dmitry Baryshkov,
Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit a7790f6bd38f3642b60ae3504a2c749135b89451 ]
The driver will reset the bridge in the atomic_pre_enable(). However
this will also drop the HPD interrupt state. Instead of resetting the
bridge, properly wake it up. This fixes the HPD interrupt delivery after
the disable/enable cycle.
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-3-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/bridge/lontium-lt9611.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c
index 2714184cc53f4..58f39b2792179 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611.c
@@ -856,12 +856,18 @@ static enum drm_mode_status lt9611_bridge_mode_valid(struct drm_bridge *bridge,
static void lt9611_bridge_pre_enable(struct drm_bridge *bridge)
{
struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
+ static const struct reg_sequence reg_cfg[] = {
+ { 0x8102, 0x12 },
+ { 0x8123, 0x40 },
+ { 0x8130, 0xea },
+ { 0x8011, 0xfa },
+ };
if (!lt9611->sleep)
return;
- lt9611_reset(lt9611);
- regmap_write(lt9611->regmap, 0x80ee, 0x01);
+ regmap_multi_reg_write(lt9611->regmap,
+ reg_cfg, ARRAY_SIZE(reg_cfg));
lt9611->sleep = false;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 300/885] drm/bridge: lt9611: fix polarity programming
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (298 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 299/885] drm/bridge: lt9611: fix HPD reenablement Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 301/885] drm/bridge: lt9611: fix programming of video modes Greg Kroah-Hartman
` (587 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Dmitry Baryshkov,
Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 0b157efa384ea417304b1da284ee2f603c607fc3 ]
Fix programming of hsync and vsync polarities
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-4-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/bridge/lontium-lt9611.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c
index 58f39b2792179..deb503ca956af 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611.c
@@ -207,7 +207,6 @@ static void lt9611_pcr_setup(struct lt9611 *lt9611, const struct drm_display_mod
/* stage 2 */
{ 0x834a, 0x40 },
- { 0x831d, 0x10 },
/* MK limit */
{ 0x832d, 0x38 },
@@ -222,11 +221,19 @@ static void lt9611_pcr_setup(struct lt9611 *lt9611, const struct drm_display_mod
{ 0x8325, 0x00 },
{ 0x832a, 0x01 },
{ 0x834a, 0x10 },
- { 0x831d, 0x10 },
- { 0x8326, 0x37 },
};
+ u8 pol = 0x10;
- regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg));
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ pol |= 0x2;
+ if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+ pol |= 0x1;
+ regmap_write(lt9611->regmap, 0x831d, pol);
+
+ if (mode->hdisplay == 3840)
+ regmap_multi_reg_write(lt9611->regmap, reg_cfg2, ARRAY_SIZE(reg_cfg2));
+ else
+ regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg));
switch (mode->hdisplay) {
case 640:
@@ -236,7 +243,7 @@ static void lt9611_pcr_setup(struct lt9611 *lt9611, const struct drm_display_mod
regmap_write(lt9611->regmap, 0x8326, 0x37);
break;
case 3840:
- regmap_multi_reg_write(lt9611->regmap, reg_cfg2, ARRAY_SIZE(reg_cfg2));
+ regmap_write(lt9611->regmap, 0x8326, 0x37);
break;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 301/885] drm/bridge: lt9611: fix programming of video modes
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (299 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 300/885] drm/bridge: lt9611: fix polarity programming Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 302/885] drm/bridge: lt9611: fix clock calculation Greg Kroah-Hartman
` (586 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Dmitry Baryshkov,
Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit ad188aa47edaa033a270e1a3efae43836ff47569 ]
Program the upper part of the hfront_porch into the proper register.
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-5-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/bridge/lontium-lt9611.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c
index deb503ca956af..f377052a45a44 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611.c
@@ -187,7 +187,8 @@ static void lt9611_mipi_video_setup(struct lt9611 *lt9611,
regmap_write(lt9611->regmap, 0x8319, (u8)(hfront_porch % 256));
- regmap_write(lt9611->regmap, 0x831a, (u8)(hsync_porch / 256));
+ regmap_write(lt9611->regmap, 0x831a, (u8)(hsync_porch / 256) |
+ ((hfront_porch / 256) << 4));
regmap_write(lt9611->regmap, 0x831b, (u8)(hsync_porch % 256));
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 302/885] drm/bridge: lt9611: fix clock calculation
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (300 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 301/885] drm/bridge: lt9611: fix programming of video modes Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 303/885] drm/bridge: lt9611: pass a pointer to the of node Greg Kroah-Hartman
` (585 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Dmitry Baryshkov,
Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 2576eb26494eb0509dd9ceb0cd27771a7a5e3674 ]
Instead of having several fixed values for the pcr register, calculate
it before programming. This allows the bridge to support most of the
display modes.
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-6-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/bridge/lontium-lt9611.c | 32 +++++++++++--------------
1 file changed, 14 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c
index f377052a45a44..e2799a0df8f8b 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611.c
@@ -192,8 +192,9 @@ static void lt9611_mipi_video_setup(struct lt9611 *lt9611,
regmap_write(lt9611->regmap, 0x831b, (u8)(hsync_porch % 256));
}
-static void lt9611_pcr_setup(struct lt9611 *lt9611, const struct drm_display_mode *mode)
+static void lt9611_pcr_setup(struct lt9611 *lt9611, const struct drm_display_mode *mode, unsigned int postdiv)
{
+ unsigned int pcr_m = mode->clock * 5 * postdiv / 27000;
const struct reg_sequence reg_cfg[] = {
{ 0x830b, 0x01 },
{ 0x830c, 0x10 },
@@ -236,24 +237,14 @@ static void lt9611_pcr_setup(struct lt9611 *lt9611, const struct drm_display_mod
else
regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg));
- switch (mode->hdisplay) {
- case 640:
- regmap_write(lt9611->regmap, 0x8326, 0x14);
- break;
- case 1920:
- regmap_write(lt9611->regmap, 0x8326, 0x37);
- break;
- case 3840:
- regmap_write(lt9611->regmap, 0x8326, 0x37);
- break;
- }
+ regmap_write(lt9611->regmap, 0x8326, pcr_m);
/* pcr rst */
regmap_write(lt9611->regmap, 0x8011, 0x5a);
regmap_write(lt9611->regmap, 0x8011, 0xfa);
}
-static int lt9611_pll_setup(struct lt9611 *lt9611, const struct drm_display_mode *mode)
+static int lt9611_pll_setup(struct lt9611 *lt9611, const struct drm_display_mode *mode, unsigned int *postdiv)
{
unsigned int pclk = mode->clock;
const struct reg_sequence reg_cfg[] = {
@@ -271,12 +262,16 @@ static int lt9611_pll_setup(struct lt9611 *lt9611, const struct drm_display_mode
regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg));
- if (pclk > 150000)
+ if (pclk > 150000) {
regmap_write(lt9611->regmap, 0x812d, 0x88);
- else if (pclk > 70000)
+ *postdiv = 1;
+ } else if (pclk > 70000) {
regmap_write(lt9611->regmap, 0x812d, 0x99);
- else
+ *postdiv = 2;
+ } else {
regmap_write(lt9611->regmap, 0x812d, 0xaa);
+ *postdiv = 4;
+ }
/*
* first divide pclk by 2 first
@@ -895,14 +890,15 @@ static void lt9611_bridge_mode_set(struct drm_bridge *bridge,
{
struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
struct hdmi_avi_infoframe avi_frame;
+ unsigned int postdiv;
int ret;
lt9611_bridge_pre_enable(bridge);
lt9611_mipi_input_digital(lt9611, mode);
- lt9611_pll_setup(lt9611, mode);
+ lt9611_pll_setup(lt9611, mode, &postdiv);
lt9611_mipi_video_setup(lt9611, mode);
- lt9611_pcr_setup(lt9611, mode);
+ lt9611_pcr_setup(lt9611, mode, postdiv);
ret = drm_hdmi_avi_infoframe_from_display_mode(&avi_frame,
<9611->connector,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 303/885] drm/bridge: lt9611: pass a pointer to the of node
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (301 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 302/885] drm/bridge: lt9611: fix clock calculation Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 304/885] regulator: tps65219: use IS_ERR() to detect an error pointer Greg Kroah-Hartman
` (584 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Dmitry Baryshkov,
Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit b0a7f8736789935f62d6df32d441cdf05a5c05d2 ]
Pass a pointer to the OF node while registering lt9611 MIPI device.
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-7-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/bridge/lontium-lt9611.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c
index e2799a0df8f8b..3b77238ca4aff 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611.c
@@ -769,7 +769,7 @@ static const struct drm_connector_funcs lt9611_bridge_connector_funcs = {
static struct mipi_dsi_device *lt9611_attach_dsi(struct lt9611 *lt9611,
struct device_node *dsi_node)
{
- const struct mipi_dsi_device_info info = { "lt9611", 0, NULL };
+ const struct mipi_dsi_device_info info = { "lt9611", 0, lt9611->dev->of_node};
struct mipi_dsi_device *dsi;
struct mipi_dsi_host *host;
struct device *dev = lt9611->dev;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 304/885] regulator: tps65219: use IS_ERR() to detect an error pointer
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (302 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 303/885] drm/bridge: lt9611: pass a pointer to the of node Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 305/885] drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness Greg Kroah-Hartman
` (583 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Randy Dunlap, Jerome Neanne,
Tony Lindgren, linux-omap, Liam Girdwood, Mark Brown,
Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 2bbba115c3c9a647bcb3201b014fcc3728fe75c8 ]
Fix pointer comparison to integer warning from gcc & sparse:
GCC:
../drivers/regulator/tps65219-regulator.c:370:26: warning: ordered comparison of pointer with integer zero [-Wextra]
370 | if (rdev < 0) {
| ^
sparse warning:
drivers/regulator/tps65219-regulator.c:370:26: sparse: error: incompatible types for operation (<):
drivers/regulator/tps65219-regulator.c:370:26: sparse: struct regulator_dev *[assigned] rdev
drivers/regulator/tps65219-regulator.c:370:26: sparse: int
Fixes: c12ac5fc3e0a ("regulator: drivers: Add TI TPS65219 PMIC regulators support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jerome Neanne <jneanne@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230114185736.2076-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/tps65219-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/tps65219-regulator.c b/drivers/regulator/tps65219-regulator.c
index c484c943e4675..070159cb5f094 100644
--- a/drivers/regulator/tps65219-regulator.c
+++ b/drivers/regulator/tps65219-regulator.c
@@ -367,7 +367,7 @@ static int tps65219_regulator_probe(struct platform_device *pdev)
irq_data[i].type = irq_type;
tps65219_get_rdev_by_name(irq_type->regulator_name, rdevtbl, rdev);
- if (rdev < 0) {
+ if (IS_ERR(rdev)) {
dev_err(tps->dev, "Failed to get rdev for %s\n",
irq_type->regulator_name);
return -EINVAL;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 305/885] drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (303 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 304/885] regulator: tps65219: use IS_ERR() to detect an error pointer Greg Kroah-Hartman
@ 2023-03-07 16:53 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 306/885] drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags Greg Kroah-Hartman
` (582 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:53 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Daniel Mentz, Richard Acayan,
Caleb Connolly, Neil Armstrong, Sam Ravnborg, Sasha Levin
From: Daniel Mentz <danielmentz@google.com>
[ Upstream commit c9d27c6be518b4ef2966d9564654ef99292ea1b3 ]
The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.
Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.
[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]
Fixes: 1a9d759331b8 ("drm/dsi: Implement DCS set/get display brightness")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://android.googlesource.com/kernel/msm/+/754affd62d0ee268c686c53169b1dbb7deac8550
[richard: fix 16-bit brightness_get]
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_mipi_dsi.c | 52 ++++++++++++++++++++++++++++++++++
include/drm/drm_mipi_dsi.h | 4 +++
2 files changed, 56 insertions(+)
diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
index 3ec02748d56fe..f25ddfe37498f 100644
--- a/drivers/gpu/drm/drm_mipi_dsi.c
+++ b/drivers/gpu/drm/drm_mipi_dsi.c
@@ -1224,6 +1224,58 @@ int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
}
EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness);
+/**
+ * mipi_dsi_dcs_set_display_brightness_large() - sets the 16-bit brightness value
+ * of the display
+ * @dsi: DSI peripheral device
+ * @brightness: brightness value
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_display_brightness_large(struct mipi_dsi_device *dsi,
+ u16 brightness)
+{
+ u8 payload[2] = { brightness >> 8, brightness & 0xff };
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
+ payload, sizeof(payload));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness_large);
+
+/**
+ * mipi_dsi_dcs_get_display_brightness_large() - gets the current 16-bit
+ * brightness value of the display
+ * @dsi: DSI peripheral device
+ * @brightness: brightness value
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_display_brightness_large(struct mipi_dsi_device *dsi,
+ u16 *brightness)
+{
+ u8 brightness_be[2];
+ ssize_t err;
+
+ err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
+ brightness_be, sizeof(brightness_be));
+ if (err <= 0) {
+ if (err == 0)
+ err = -ENODATA;
+
+ return err;
+ }
+
+ *brightness = (brightness_be[0] << 8) | brightness_be[1];
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness_large);
+
static int mipi_dsi_drv_probe(struct device *dev)
{
struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver);
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index 20b21b577deaa..9054a5185e1a9 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -296,6 +296,10 @@ int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
u16 brightness);
int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
u16 *brightness);
+int mipi_dsi_dcs_set_display_brightness_large(struct mipi_dsi_device *dsi,
+ u16 brightness);
+int mipi_dsi_dcs_get_display_brightness_large(struct mipi_dsi_device *dsi,
+ u16 *brightness);
/**
* mipi_dsi_dcs_write_seq - transmit a DCS command with payload
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 306/885] drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (304 preceding siblings ...)
2023-03-07 16:53 ` [PATCH 6.1 305/885] drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 307/885] drm/msm/dsi: Allow 2 CTRLs on v2.5.0 Greg Kroah-Hartman
` (581 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marek Vasut, Nicolas Boichat,
Sébastien Szymanski, Jagan Teki, Frieder Schrempf,
Sasha Levin
From: Jagan Teki <jagan@amarulasolutions.com>
[ Upstream commit 996e1defca34485dd2bd70b173f069aab5f21a65 ]
HFP/HBP/HSA/EOT_PACKET modes in Exynos DSI host specifies
0 = Enable and 1 = Disable.
The logic for checking these mode flags was correct before
the MIPI_DSI*_NO_* mode flag conversion.
This patch is trying to fix this MIPI_DSI*_NO_* mode flags handling
Exynos DSI host and update the mode_flags in relevant panel drivers.
Fixes: 0f3b68b66a6d ("drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling features")
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-1-jagan@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 8 ++++----
drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 4 +++-
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 3 ++-
drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c | 2 --
4 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index ec673223d6b7a..b5305b145ddbd 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -805,15 +805,15 @@ static int exynos_dsi_init_link(struct exynos_dsi *dsi)
reg |= DSIM_AUTO_MODE;
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HSE)
reg |= DSIM_HSE_MODE;
- if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HFP))
+ if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HFP)
reg |= DSIM_HFP_MODE;
- if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HBP))
+ if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HBP)
reg |= DSIM_HBP_MODE;
- if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HSA))
+ if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HSA)
reg |= DSIM_HSA_MODE;
}
- if (!(dsi->mode_flags & MIPI_DSI_MODE_NO_EOT_PACKET))
+ if (dsi->mode_flags & MIPI_DSI_MODE_NO_EOT_PACKET)
reg |= DSIM_EOT_DISABLE;
switch (dsi->format) {
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
index 5c621b15e84c2..439ef30735128 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
@@ -692,7 +692,9 @@ static int s6e3ha2_probe(struct mipi_dsi_device *dsi)
dsi->lanes = 4;
dsi->format = MIPI_DSI_FMT_RGB888;
- dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
+ dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS |
+ MIPI_DSI_MODE_VIDEO_NO_HFP | MIPI_DSI_MODE_VIDEO_NO_HBP |
+ MIPI_DSI_MODE_VIDEO_NO_HSA | MIPI_DSI_MODE_NO_EOT_PACKET;
ctx->supplies[0].supply = "vdd3";
ctx->supplies[1].supply = "vci";
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c
index e06fd35de814b..9c3e76171759a 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c
@@ -446,7 +446,8 @@ static int s6e63j0x03_probe(struct mipi_dsi_device *dsi)
dsi->lanes = 1;
dsi->format = MIPI_DSI_FMT_RGB888;
- dsi->mode_flags = MIPI_DSI_MODE_NO_EOT_PACKET;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO_NO_HFP |
+ MIPI_DSI_MODE_VIDEO_NO_HBP | MIPI_DSI_MODE_VIDEO_NO_HSA;
ctx->supplies[0].supply = "vdd3";
ctx->supplies[1].supply = "vci";
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
index 54213beafaf5e..ebf4c2d39ea88 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
@@ -990,8 +990,6 @@ static int s6e8aa0_probe(struct mipi_dsi_device *dsi)
dsi->lanes = 4;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST
- | MIPI_DSI_MODE_VIDEO_NO_HFP | MIPI_DSI_MODE_VIDEO_NO_HBP
- | MIPI_DSI_MODE_VIDEO_NO_HSA | MIPI_DSI_MODE_NO_EOT_PACKET
| MIPI_DSI_MODE_VSYNC_FLUSH | MIPI_DSI_MODE_VIDEO_AUTO_VERT;
ret = s6e8aa0_parse_dt(ctx);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 307/885] drm/msm/dsi: Allow 2 CTRLs on v2.5.0
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (305 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 306/885] drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 308/885] scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096 Greg Kroah-Hartman
` (580 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Konrad Dybcio, Dmitry Baryshkov,
Sasha Levin
From: Konrad Dybcio <konrad.dybcio@linaro.org>
[ Upstream commit 1ae654ded7c5a19dc13f57a4fe4434fef879b6f9 ]
v2.5.0 support was originally added for SC7280, but this hw is also
present on SM8350, which has one more DSI host. Bump up the dsi count
and fill in the register of the secondary host to allow it to probe.
This should not have any adverse effects on SC7280, as the secondary
CTRL will only be touched if it's defined, anyway.
Fixes: 65c391b31994 ("drm/msm/dsi: Add DSI support for SC7280")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519513/
Link: https://lore.kernel.org/r/20230120210101.2146852-1-konrad.dybcio@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 7e97c239ed489..e0bd452a9f1e6 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -209,8 +209,8 @@ static const struct msm_dsi_config sc7280_dsi_cfg = {
.num_regulators = ARRAY_SIZE(sc7280_dsi_regulators),
.bus_clk_names = dsi_sc7280_bus_clk_names,
.num_bus_clks = ARRAY_SIZE(dsi_sc7280_bus_clk_names),
- .io_start = { 0xae94000 },
- .num_dsi = 1,
+ .io_start = { 0xae94000, 0xae96000 },
+ .num_dsi = 2,
};
static const char * const dsi_qcm2290_bus_clk_names[] = {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 308/885] scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (306 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 307/885] drm/msm/dsi: Allow 2 CTRLs on v2.5.0 Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 309/885] drm/msm/dpu: sc7180: add missing WB2 clock control Greg Kroah-Hartman
` (579 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kiwoong Kim, Bart Van Assche,
Alim Akhtar, Martin K. Petersen, Sasha Levin
From: Bart Van Assche <bvanassche@acm.org>
[ Upstream commit 86bd0c4a2a5dc4265884648cb92c681646509692 ]
The Exynos UFS controller only supports scatter/gather list elements that
are aligned on a 4 KiB boundary. Fix DMA alignment in case PAGE_SIZE !=
4096. Rename UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE into
UFSHCD_QUIRK_4KB_DMA_ALIGNMENT.
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Fixes: 2b2bfc8aa519 ("scsi: ufs: Introduce a quirk to allow only page-aligned sg entries")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ufs/core/ufshcd.c | 4 ++--
drivers/ufs/host/ufs-exynos.c | 2 +-
include/ufs/ufshcd.h | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index fb5c9e2fc5348..e08ce7f2ff3af 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -5068,8 +5068,8 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
ufshcd_hpb_configure(hba, sdev);
blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1);
- if (hba->quirks & UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE)
- blk_queue_update_dma_alignment(q, PAGE_SIZE - 1);
+ if (hba->quirks & UFSHCD_QUIRK_4KB_DMA_ALIGNMENT)
+ blk_queue_update_dma_alignment(q, 4096 - 1);
/*
* Block runtime-pm until all consumers are added.
* Refer ufshcd_setup_links().
diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index c3628a8645a56..3cdac89a28b81 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -1673,7 +1673,7 @@ static const struct exynos_ufs_drv_data exynos_ufs_drvs = {
UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR |
UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL |
UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING |
- UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE,
+ UFSHCD_QUIRK_4KB_DMA_ALIGNMENT,
.opts = EXYNOS_UFS_OPT_HAS_APB_CLK_CTRL |
EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL |
EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX |
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index 2bb89290da63c..b54f22840dabf 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -566,9 +566,9 @@ enum ufshcd_quirks {
UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13,
/*
- * This quirk allows only sg entries aligned with page size.
+ * Align DMA SG entries on a 4 KiB boundary.
*/
- UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE = 1 << 14,
+ UFSHCD_QUIRK_4KB_DMA_ALIGNMENT = 1 << 14,
/*
* This quirk needs to be enabled if the host controller does not
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 309/885] drm/msm/dpu: sc7180: add missing WB2 clock control
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (307 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 308/885] scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096 Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 310/885] drm/msm: use strscpy instead of strncpy Greg Kroah-Hartman
` (578 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Baryshkov, Abhinav Kumar,
Sasha Levin, Jessica Zhang
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 255f056181ac69278dcd8778f0be32a21b2d2a6a ]
Add missing DPU_CLK_CTRL_WB2 to sc7180_mdp clocks array.
Fixes: 51e4d60e6ba5 ("drm/msm/dpu: add writeback support for sc7180")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/518504/
Link: https://lore.kernel.org/r/20230116103055.780767-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 27f029fdc6829..365738f40976a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -444,6 +444,8 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = {
.reg_off = 0x2B4, .bit_off = 8},
.clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
.reg_off = 0x2C4, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_WB2] = {
+ .reg_off = 0x3B8, .bit_off = 24},
},
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 310/885] drm/msm: use strscpy instead of strncpy
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (308 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 309/885] drm/msm/dpu: sc7180: add missing WB2 clock control Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 311/885] drm/msm/dpu: Add check for cstate Greg Kroah-Hartman
` (577 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Baryshkov, Abhinav Kumar,
Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit d7fd8634f48d76aa799ed57beb7d87dab91bde80 ]
Using strncpy can result in non-NULL-terminated destination string. Use
strscpy instead. This fixes following warning:
drivers/gpu/drm/msm/msm_fence.c: In function ‘msm_fence_context_alloc’:
drivers/gpu/drm/msm/msm_fence.c:25:9: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
25 | strncpy(fctx->name, name, sizeof(fctx->name));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: f97decac5f4c ("drm/msm: Support multiple ringbuffers")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518787/
Link: https://lore.kernel.org/r/20230118020152.1689213-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/msm_fence.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/msm_fence.c b/drivers/gpu/drm/msm/msm_fence.c
index a47e5837c528f..56641408ea742 100644
--- a/drivers/gpu/drm/msm/msm_fence.c
+++ b/drivers/gpu/drm/msm/msm_fence.c
@@ -22,7 +22,7 @@ msm_fence_context_alloc(struct drm_device *dev, volatile uint32_t *fenceptr,
return ERR_PTR(-ENOMEM);
fctx->dev = dev;
- strncpy(fctx->name, name, sizeof(fctx->name));
+ strscpy(fctx->name, name, sizeof(fctx->name));
fctx->context = dma_fence_context_alloc(1);
fctx->index = index++;
fctx->fenceptr = fenceptr;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 311/885] drm/msm/dpu: Add check for cstate
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (309 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 310/885] drm/msm: use strscpy instead of strncpy Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 312/885] drm/msm/dpu: Add check for pstates Greg Kroah-Hartman
` (576 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Abhinav Kumar,
Dmitry Baryshkov, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit c96988b7d99327bb08bd9efd29a203b22cd88ace ]
As kzalloc may fail and return NULL pointer,
it should be better to check cstate
in order to avoid the NULL pointer dereference
in __drm_atomic_helper_crtc_reset.
Fixes: 1cff7440a86e ("drm/msm: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514163/
Link: https://lore.kernel.org/r/20221206080517.43786-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 13ce321283ff9..22c2787b7b381 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -968,7 +968,10 @@ static void dpu_crtc_reset(struct drm_crtc *crtc)
if (crtc->state)
dpu_crtc_destroy_state(crtc, crtc->state);
- __drm_atomic_helper_crtc_reset(crtc, &cstate->base);
+ if (cstate)
+ __drm_atomic_helper_crtc_reset(crtc, &cstate->base);
+ else
+ __drm_atomic_helper_crtc_reset(crtc, NULL);
}
/**
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 312/885] drm/msm/dpu: Add check for pstates
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (310 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 311/885] drm/msm/dpu: Add check for cstate Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 313/885] drm/msm/mdp5: Add check for kzalloc Greg Kroah-Hartman
` (575 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Abhinav Kumar,
Dmitry Baryshkov, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit 93340e10b9c5fc86730d149636e0aa8b47bb5a34 ]
As kzalloc may fail and return NULL pointer,
it should be better to check pstates
in order to avoid the NULL pointer dereference.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514160/
Link: https://lore.kernel.org/r/20221206080236.43687-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 22c2787b7b381..c9d1c412628e9 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -1153,6 +1153,8 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
bool needs_dirtyfb = dpu_crtc_needs_dirtyfb(crtc_state);
pstates = kzalloc(sizeof(*pstates) * DPU_STAGE_MAX * 4, GFP_KERNEL);
+ if (!pstates)
+ return -ENOMEM;
if (!crtc_state->enable || !crtc_state->active) {
DRM_DEBUG_ATOMIC("crtc%d -> enable %d, active %d, skip atomic_check\n",
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 313/885] drm/msm/mdp5: Add check for kzalloc
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (311 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 312/885] drm/msm/dpu: Add check for pstates Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 314/885] habanalabs: bugs fixes in timestamps buff alloc Greg Kroah-Hartman
` (574 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Dmitry Baryshkov,
Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit 13fcfcb2a9a4787fe4e49841d728f6f2e9fa6911 ]
As kzalloc may fail and return NULL pointer,
it should be better to check the return value
in order to avoid the NULL pointer dereference.
Fixes: 1cff7440a86e ("drm/msm: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514154/
Link: https://lore.kernel.org/r/20221206074819.18134-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
index e86421c69bd1f..86036dd4e1e82 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
@@ -1139,7 +1139,10 @@ static void mdp5_crtc_reset(struct drm_crtc *crtc)
if (crtc->state)
mdp5_crtc_destroy_state(crtc, crtc->state);
- __drm_atomic_helper_crtc_reset(crtc, &mdp5_cstate->base);
+ if (mdp5_cstate)
+ __drm_atomic_helper_crtc_reset(crtc, &mdp5_cstate->base);
+ else
+ __drm_atomic_helper_crtc_reset(crtc, NULL);
}
static const struct drm_crtc_funcs mdp5_crtc_no_lm_cursor_funcs = {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 314/885] habanalabs: bugs fixes in timestamps buff alloc
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (312 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 313/885] drm/msm/mdp5: Add check for kzalloc Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 315/885] pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback() Greg Kroah-Hartman
` (573 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, farah kassabri, Oded Gabbay, Sasha Levin
From: farah kassabri <fkassabri@habana.ai>
[ Upstream commit 1693fef9e95dbe8ab767d208a02328fff13fbb94 ]
use argument instead of fixed GFP value for allocation
in Timestamps buffers alloc function.
change data type of size to size_t.
Fixes: 9158bf69e74f ("habanalabs: Timestamps buffers registration")
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/habanalabs/common/memory.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/habanalabs/common/memory.c b/drivers/misc/habanalabs/common/memory.c
index ef28f3b37b932..a49038da3f6d0 100644
--- a/drivers/misc/habanalabs/common/memory.c
+++ b/drivers/misc/habanalabs/common/memory.c
@@ -2089,12 +2089,13 @@ static int hl_ts_mmap(struct hl_mmap_mem_buf *buf, struct vm_area_struct *vma, v
static int hl_ts_alloc_buf(struct hl_mmap_mem_buf *buf, gfp_t gfp, void *args)
{
struct hl_ts_buff *ts_buff = NULL;
- u32 size, num_elements;
+ u32 num_elements;
+ size_t size;
void *p;
num_elements = *(u32 *)args;
- ts_buff = kzalloc(sizeof(*ts_buff), GFP_KERNEL);
+ ts_buff = kzalloc(sizeof(*ts_buff), gfp);
if (!ts_buff)
return -ENOMEM;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 315/885] pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (313 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 314/885] habanalabs: bugs fixes in timestamps buff alloc Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 316/885] pinctrl: mediatek: Initialize variable pullen and pullup to zero Greg Kroah-Hartman
` (572 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko, Stefan Wahren,
Florian Fainelli, Bartosz Golaszewski, Linus Walleij,
Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 2d578dd27871372f7159dd3206149ec616700d87 ]
Remove wrong of_node_put() in bcm2835_of_gpio_ranges_fallback(),
there is no counterpart of_node_get() for it.
Fixes: d2b67744fd99 ("pinctrl: bcm2835: implement hook for missing gpio-ranges")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 7857e612a1008..c7cdccdb4332a 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -363,8 +363,6 @@ static int bcm2835_of_gpio_ranges_fallback(struct gpio_chip *gc,
{
struct pinctrl_dev *pctldev = of_pinctrl_get(np);
- of_node_put(np);
-
if (!pctldev)
return 0;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 316/885] pinctrl: mediatek: Initialize variable pullen and pullup to zero
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (314 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 315/885] pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback() Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 317/885] pinctrl: mediatek: Initialize variable *buf " Greg Kroah-Hartman
` (571 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Guodong Liu,
AngeloGioacchino Del Regno, Linus Walleij, Sasha Levin
From: Guodong Liu <Guodong.Liu@mediatek.com>
[ Upstream commit a298c70a10c604a6b3df5a0aa56597b705ba0f6b ]
Coverity spotted that pullen and pullup is not initialized to zero in
mtk_pctrl_show_one_pin. The uninitialized variable pullen is used in
assignment statement "rsel = pullen;" in mtk_pctrl_show_one_pin, and
Uninitialized variable pullup is used when calling scnprintf. Fix this
coverity by initializing pullen and pullup as zero.
Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-2-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 74517e8109585..3b5c9352686db 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -635,7 +635,7 @@ static int mtk_hw_get_value_wrap(struct mtk_pinctrl *hw, unsigned int gpio, int
ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
unsigned int gpio, char *buf, unsigned int buf_len)
{
- int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1, rsel = -1;
+ int pinmux, pullup = 0, pullen = 0, len = 0, r1 = -1, r0 = -1, rsel = -1;
const struct mtk_pin_desc *desc;
u32 try_all_type = 0;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 317/885] pinctrl: mediatek: Initialize variable *buf to zero
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (315 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 316/885] pinctrl: mediatek: Initialize variable pullen and pullup to zero Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 318/885] gpu: host1x: Fix mask for syncpoint increment register Greg Kroah-Hartman
` (570 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Guodong Liu,
AngeloGioacchino Del Regno, Linus Walleij, Sasha Levin
From: Guodong Liu <Guodong.Liu@mediatek.com>
[ Upstream commit 2e34f82ba214134ecf590fbe0cdbd87401645a8a ]
Coverity spotted that *buf is not initialized to zero in
mtk_pctrl_dbg_show. Using uninitialized variable *buf as argument to %s
when calling seq_printf. Fix this coverity by initializing *buf as zero.
Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-3-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 3b5c9352686db..ad873bd051b68 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -712,7 +712,7 @@ static void mtk_pctrl_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
unsigned int gpio)
{
struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
- char buf[PIN_DBG_BUF_SZ];
+ char buf[PIN_DBG_BUF_SZ] = { 0 };
(void)mtk_pctrl_show_one_pin(hw, gpio, buf, PIN_DBG_BUF_SZ);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 318/885] gpu: host1x: Fix mask for syncpoint increment register
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (316 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 317/885] pinctrl: mediatek: Initialize variable *buf " Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 319/885] gpu: host1x: Dont skip assigning syncpoints to channels Greg Kroah-Hartman
` (569 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mikko Perttunen, Thierry Reding,
Sasha Levin
From: Mikko Perttunen <mperttunen@nvidia.com>
[ Upstream commit 79aad29c7d2d2cd64790115d3a6ebac28c00a8ec ]
On Tegra186+, the syncpoint ID has 10 bits of space. To allow
using more than 256 syncpoints, fix the mask.
Fixes: 9abdd497cd0a ("gpu: host1x: Tegra234 device data and headers")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/host1x/hw/hw_host1x06_uclass.h | 2 +-
drivers/gpu/host1x/hw/hw_host1x07_uclass.h | 2 +-
drivers/gpu/host1x/hw/hw_host1x08_uclass.h | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/host1x/hw/hw_host1x06_uclass.h b/drivers/gpu/host1x/hw/hw_host1x06_uclass.h
index 5f831438d19bb..50c32de452fb1 100644
--- a/drivers/gpu/host1x/hw/hw_host1x06_uclass.h
+++ b/drivers/gpu/host1x/hw/hw_host1x06_uclass.h
@@ -53,7 +53,7 @@ static inline u32 host1x_uclass_incr_syncpt_cond_f(u32 v)
host1x_uclass_incr_syncpt_cond_f(v)
static inline u32 host1x_uclass_incr_syncpt_indx_f(u32 v)
{
- return (v & 0xff) << 0;
+ return (v & 0x3ff) << 0;
}
#define HOST1X_UCLASS_INCR_SYNCPT_INDX_F(v) \
host1x_uclass_incr_syncpt_indx_f(v)
diff --git a/drivers/gpu/host1x/hw/hw_host1x07_uclass.h b/drivers/gpu/host1x/hw/hw_host1x07_uclass.h
index 8cd2ef087d5d0..887b878f92f79 100644
--- a/drivers/gpu/host1x/hw/hw_host1x07_uclass.h
+++ b/drivers/gpu/host1x/hw/hw_host1x07_uclass.h
@@ -53,7 +53,7 @@ static inline u32 host1x_uclass_incr_syncpt_cond_f(u32 v)
host1x_uclass_incr_syncpt_cond_f(v)
static inline u32 host1x_uclass_incr_syncpt_indx_f(u32 v)
{
- return (v & 0xff) << 0;
+ return (v & 0x3ff) << 0;
}
#define HOST1X_UCLASS_INCR_SYNCPT_INDX_F(v) \
host1x_uclass_incr_syncpt_indx_f(v)
diff --git a/drivers/gpu/host1x/hw/hw_host1x08_uclass.h b/drivers/gpu/host1x/hw/hw_host1x08_uclass.h
index 724cccd71aa1a..4fb1d090edae5 100644
--- a/drivers/gpu/host1x/hw/hw_host1x08_uclass.h
+++ b/drivers/gpu/host1x/hw/hw_host1x08_uclass.h
@@ -53,7 +53,7 @@ static inline u32 host1x_uclass_incr_syncpt_cond_f(u32 v)
host1x_uclass_incr_syncpt_cond_f(v)
static inline u32 host1x_uclass_incr_syncpt_indx_f(u32 v)
{
- return (v & 0xff) << 0;
+ return (v & 0x3ff) << 0;
}
#define HOST1X_UCLASS_INCR_SYNCPT_INDX_F(v) \
host1x_uclass_incr_syncpt_indx_f(v)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 319/885] gpu: host1x: Dont skip assigning syncpoints to channels
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (317 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 318/885] gpu: host1x: Fix mask for syncpoint increment register Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 320/885] drm/tegra: firewall: Check for is_addr_reg existence in IMM check Greg Kroah-Hartman
` (568 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mikko Perttunen, Thierry Reding,
Sasha Levin
From: Mikko Perttunen <mperttunen@nvidia.com>
[ Upstream commit eb258cc1fd458e584082be987dbc6ec42668c05e ]
The code to write the syncpoint channel assignment register
incorrectly skips the write if hypervisor registers are not available.
The register, however, is within the guest aperture so remove the
check and assign syncpoints properly even on virtualized systems.
Fixes: c3f52220f276 ("gpu: host1x: Enable Tegra186 syncpoint protection")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/host1x/hw/syncpt_hw.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/gpu/host1x/hw/syncpt_hw.c b/drivers/gpu/host1x/hw/syncpt_hw.c
index dd39d67ccec36..8cf35b2eff3db 100644
--- a/drivers/gpu/host1x/hw/syncpt_hw.c
+++ b/drivers/gpu/host1x/hw/syncpt_hw.c
@@ -106,9 +106,6 @@ static void syncpt_assign_to_channel(struct host1x_syncpt *sp,
#if HOST1X_HW >= 6
struct host1x *host = sp->host;
- if (!host->hv_regs)
- return;
-
host1x_sync_writel(host,
HOST1X_SYNC_SYNCPT_CH_APP_CH(ch ? ch->id : 0xff),
HOST1X_SYNC_SYNCPT_CH_APP(sp->id));
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 320/885] drm/tegra: firewall: Check for is_addr_reg existence in IMM check
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (318 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 319/885] gpu: host1x: Dont skip assigning syncpoints to channels Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 321/885] pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts Greg Kroah-Hartman
` (567 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mikko Perttunen, Thierry Reding,
Sasha Levin
From: Mikko Perttunen <mperttunen@nvidia.com>
[ Upstream commit 1b5c09de25e8c08655c270a70e5e74e93b6bad1f ]
In the IMM opcode check, don't call is_addr_reg if it's not set.
Fixes: 8cc95f3fd35e ("drm/tegra: Add job firewall")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/tegra/firewall.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/tegra/firewall.c b/drivers/gpu/drm/tegra/firewall.c
index 1824d2db0e2ce..d53f890fa6893 100644
--- a/drivers/gpu/drm/tegra/firewall.c
+++ b/drivers/gpu/drm/tegra/firewall.c
@@ -97,6 +97,9 @@ static int fw_check_regs_imm(struct tegra_drm_firewall *fw, u32 offset)
{
bool is_addr;
+ if (!fw->client->ops->is_addr_reg)
+ return 0;
+
is_addr = fw->client->ops->is_addr_reg(fw->client->base.dev, fw->class,
offset);
if (is_addr)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 321/885] pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (319 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 320/885] drm/tegra: firewall: Check for is_addr_reg existence in IMM check Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 322/885] drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update() Greg Kroah-Hartman
` (566 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lad Prabhakar, Geert Uytterhoeven,
Linus Walleij, Sasha Levin
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
[ Upstream commit 00dfe29887761405ccd23cc0aa07cb86623bb2b7 ]
On the RZ/G2UL SoC we have less number of pins compared to RZ/G2L and also
the pin configs are completely different. This patch makes sure we use the
appropriate pin configs for each SoC (which is passed as part of the OF
data) while configuring the GPIO pin as interrupts instead of using
rzg2l_gpio_configs[] for all the SoCs.
Fixes: bfc69bdbaad1 ("pinctrl: renesas: rzg2l: Add RZ/G2UL support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index a43824fd9505f..ca6303fc41f98 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -127,6 +127,7 @@ struct rzg2l_dedicated_configs {
struct rzg2l_pinctrl_data {
const char * const *port_pins;
const u32 *port_pin_configs;
+ unsigned int n_ports;
struct rzg2l_dedicated_configs *dedicated_pins;
unsigned int n_port_pins;
unsigned int n_dedicated_pins;
@@ -1122,7 +1123,7 @@ static struct {
}
};
-static int rzg2l_gpio_get_gpioint(unsigned int virq)
+static int rzg2l_gpio_get_gpioint(unsigned int virq, const struct rzg2l_pinctrl_data *data)
{
unsigned int gpioint;
unsigned int i;
@@ -1131,13 +1132,13 @@ static int rzg2l_gpio_get_gpioint(unsigned int virq)
port = virq / 8;
bit = virq % 8;
- if (port >= ARRAY_SIZE(rzg2l_gpio_configs) ||
- bit >= RZG2L_GPIO_PORT_GET_PINCNT(rzg2l_gpio_configs[port]))
+ if (port >= data->n_ports ||
+ bit >= RZG2L_GPIO_PORT_GET_PINCNT(data->port_pin_configs[port]))
return -EINVAL;
gpioint = bit;
for (i = 0; i < port; i++)
- gpioint += RZG2L_GPIO_PORT_GET_PINCNT(rzg2l_gpio_configs[i]);
+ gpioint += RZG2L_GPIO_PORT_GET_PINCNT(data->port_pin_configs[i]);
return gpioint;
}
@@ -1237,7 +1238,7 @@ static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
unsigned long flags;
int gpioint, irq;
- gpioint = rzg2l_gpio_get_gpioint(child);
+ gpioint = rzg2l_gpio_get_gpioint(child, pctrl->data);
if (gpioint < 0)
return gpioint;
@@ -1311,8 +1312,8 @@ static void rzg2l_init_irq_valid_mask(struct gpio_chip *gc,
port = offset / 8;
bit = offset % 8;
- if (port >= ARRAY_SIZE(rzg2l_gpio_configs) ||
- bit >= RZG2L_GPIO_PORT_GET_PINCNT(rzg2l_gpio_configs[port]))
+ if (port >= pctrl->data->n_ports ||
+ bit >= RZG2L_GPIO_PORT_GET_PINCNT(pctrl->data->port_pin_configs[port]))
clear_bit(offset, valid_mask);
}
}
@@ -1517,6 +1518,7 @@ static int rzg2l_pinctrl_probe(struct platform_device *pdev)
static struct rzg2l_pinctrl_data r9a07g043_data = {
.port_pins = rzg2l_gpio_names,
.port_pin_configs = r9a07g043_gpio_configs,
+ .n_ports = ARRAY_SIZE(r9a07g043_gpio_configs),
.dedicated_pins = rzg2l_dedicated_pins.common,
.n_port_pins = ARRAY_SIZE(r9a07g043_gpio_configs) * RZG2L_PINS_PER_PORT,
.n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common),
@@ -1525,6 +1527,7 @@ static struct rzg2l_pinctrl_data r9a07g043_data = {
static struct rzg2l_pinctrl_data r9a07g044_data = {
.port_pins = rzg2l_gpio_names,
.port_pin_configs = rzg2l_gpio_configs,
+ .n_ports = ARRAY_SIZE(rzg2l_gpio_configs),
.dedicated_pins = rzg2l_dedicated_pins.common,
.n_port_pins = ARRAY_SIZE(rzg2l_gpio_names),
.n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common) +
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 322/885] drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (320 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 321/885] pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 323/885] drm/mediatek: dsi: Reduce the time of dsi from LP11 to sending cmd Greg Kroah-Hartman
` (565 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Baryshkov, Abhinav Kumar,
Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 1d233b1cb149ec78c20fac58331b27bb460f9558 ]
The function dpu_plane_sspp_atomic_update() updates pdpu->is_rt_pipe
flag, but after the commit 854f6f1c653b ("drm/msm/dpu: update the qos
remap only if the client type changes") it sets the flag late, after all
the qos functions have updated QoS programming. Move the flag update
back to the place where it happened before the mentioned commit to let
the pipe be programmed according to its current RT/non-RT state.
Fixes: 854f6f1c653b ("drm/msm/dpu: update the qos remap only if the client type changes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/516239/
Link: https://lore.kernel.org/r/20221229191856.3508092-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 658005f609f4b..3fbda2a1f77fc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -1124,7 +1124,7 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
struct dpu_plane_state *pstate = to_dpu_plane_state(state);
struct drm_crtc *crtc = state->crtc;
struct drm_framebuffer *fb = state->fb;
- bool is_rt_pipe, update_qos_remap;
+ bool is_rt_pipe;
const struct dpu_format *fmt =
to_dpu_format(msm_framebuffer_format(fb));
struct dpu_hw_pipe_cfg pipe_cfg;
@@ -1136,6 +1136,9 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
pstate->pending = true;
is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
+ pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe);
+ pdpu->is_rt_pipe = is_rt_pipe;
+
_dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
@@ -1217,14 +1220,8 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
_dpu_plane_set_ot_limit(plane, crtc, &pipe_cfg);
}
- update_qos_remap = (is_rt_pipe != pdpu->is_rt_pipe) ||
- pstate->needs_qos_remap;
-
- if (update_qos_remap) {
- if (is_rt_pipe != pdpu->is_rt_pipe)
- pdpu->is_rt_pipe = is_rt_pipe;
- else if (pstate->needs_qos_remap)
- pstate->needs_qos_remap = false;
+ if (pstate->needs_qos_remap) {
+ pstate->needs_qos_remap = false;
_dpu_plane_set_qos_remap(plane);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 323/885] drm/mediatek: dsi: Reduce the time of dsi from LP11 to sending cmd
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (321 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 322/885] drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update() Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 324/885] drm/mediatek: Use NULL instead of 0 for NULL pointer Greg Kroah-Hartman
` (564 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xinlei Lee, Sam Ravnborg,
AngeloGioacchino Del Regno, Chun-Kuang Hu, Sasha Levin
From: Xinlei Lee <xinlei.lee@mediatek.com>
[ Upstream commit 91aeaed2c1147e3b1157dc084d23f190856a6c23 ]
According to Figure 16 Turnaround Procedure on page 36 in [1], you
can see the status of LP-00 -> LP10 -> LP11. This state can correspond
to the state of DSI from LP00 -> LP11 in mtk_dsi_lane_ready function
in mtk_dsi.c.
LP-00 -> LP10 -> LP11 takes about 2*TLPX time (refer to [1] page 51
to see that TLPX is 50ns)
The delay at the end of the mtk_dsi_lane_ready function should be
greater than the 2*TLPX specified by the DSI spec, and less than
the time specified by the DSI_RX (generally 6ms to 40ms), to avoid
problems caused by the RX specification
[1]:mipi_D-PHY_specification_v1-1
Fixes: 39e8d062b03c ("drm/mediatek: Keep dsi as LP00 before dcs cmds transfer")
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1673330093-6771-2-git-send-email-xinlei.lee@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 3b7d13028fb6b..9e1363c9fcdb4 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -721,7 +721,7 @@ static void mtk_dsi_lane_ready(struct mtk_dsi *dsi)
mtk_dsi_clk_ulp_mode_leave(dsi);
mtk_dsi_lane0_ulp_mode_leave(dsi);
mtk_dsi_clk_hs_mode(dsi, 0);
- msleep(20);
+ usleep_range(1000, 3000);
/* The reaction time after pulling up the mipi signal for dsi_rx */
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 324/885] drm/mediatek: Use NULL instead of 0 for NULL pointer
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (322 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 323/885] drm/mediatek: dsi: Reduce the time of dsi from LP11 to sending cmd Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 325/885] drm/mediatek: Drop unbalanced obj unref Greg Kroah-Hartman
` (563 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miles Chen,
AngeloGioacchino Del Regno, Chun-Kuang Hu, Sasha Levin
From: Miles Chen <miles.chen@mediatek.com>
[ Upstream commit 4744cde06f57dd6fbaac468663b1fe2f653eaa16 ]
Use NULL for NULL pointer to fix the following sparse warning:
drivers/gpu/drm/mediatek/mtk_drm_gem.c:265:27: sparse: warning: Using plain integer as NULL pointer
Fixes: 3df64d7b0a4f ("drm/mediatek: Implement gem prime vmap/vunmap function")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230111024443.24559-1-miles.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/mediatek/mtk_drm_gem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_gem.c b/drivers/gpu/drm/mediatek/mtk_drm_gem.c
index 47e96b0289f98..06aadd5e7f5ba 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_gem.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_gem.c
@@ -262,6 +262,6 @@ void mtk_drm_gem_prime_vunmap(struct drm_gem_object *obj,
return;
vunmap(vaddr);
- mtk_gem->kvaddr = 0;
+ mtk_gem->kvaddr = NULL;
kfree(mtk_gem->pages);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 325/885] drm/mediatek: Drop unbalanced obj unref
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (323 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 324/885] drm/mediatek: Use NULL instead of 0 for NULL pointer Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 326/885] drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc Greg Kroah-Hartman
` (562 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Rob Clark, Chun-Kuang Hu, Sasha Levin
From: Rob Clark <robdclark@chromium.org>
[ Upstream commit 4deef811828e87e26a978d5d6433b261d4713849 ]
In the error path, mtk_drm_gem_object_mmap() is dropping an obj
reference that it doesn't own.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230119231255.2883365-1-robdclark@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/mediatek/mtk_drm_gem.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_gem.c b/drivers/gpu/drm/mediatek/mtk_drm_gem.c
index 06aadd5e7f5ba..6c204ccfb9ece 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_gem.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_gem.c
@@ -164,8 +164,6 @@ static int mtk_drm_gem_object_mmap(struct drm_gem_object *obj,
ret = dma_mmap_attrs(priv->dma_dev, vma, mtk_gem->cookie,
mtk_gem->dma_addr, obj->size, mtk_gem->dma_attrs);
- if (ret)
- drm_gem_vm_close(vma);
return ret;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 326/885] drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (324 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 325/885] drm/mediatek: Drop unbalanced obj unref Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 327/885] drm/mediatek: Clean dangling pointer on bind error path Greg Kroah-Hartman
` (561 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, ruanjinjie,
AngeloGioacchino Del Regno, Chun-Kuang Hu, Sasha Levin
From: ruanjinjie <ruanjinjie@huawei.com>
[ Upstream commit 5bf1e3bd7da625ccf9a22c8cb7d65271e6e47f4c ]
As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.
Fixes: 31c5558dae05 ("drm/mediatek: Refactor plane init")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221205095115.2905090-1-ruanjinjie@huawei.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 112615817dcbe..5071f1263216b 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -945,6 +945,8 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
mtk_crtc->planes = devm_kcalloc(dev, num_comp_planes,
sizeof(struct drm_plane), GFP_KERNEL);
+ if (!mtk_crtc->planes)
+ return -ENOMEM;
for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
ret = mtk_drm_crtc_init_comp_planes(drm_dev, mtk_crtc, i,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 327/885] drm/mediatek: Clean dangling pointer on bind error path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (325 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 326/885] drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 328/885] ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress() Greg Kroah-Hartman
` (560 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nícolas F . R . A . Prado,
AngeloGioacchino Del Regno, Chun-Kuang Hu, Sasha Levin
From: Nícolas F. R. A. Prado <nfraprado@collabora.com>
[ Upstream commit 36aa8c61af55675ed967900fbe5deb32d776f051 ]
mtk_drm_bind() can fail, in which case drm_dev_put() is called,
destroying the drm_device object. However a pointer to it was still
being held in the private object, and that pointer would be passed along
to DRM in mtk_drm_sys_prepare() if a suspend were triggered at that
point, resulting in a panic. Clean the pointer when destroying the
object in the error path to prevent this from happening.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221122143949.3493104-1-nfraprado@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 91f58db5915f5..25639fbfd374a 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -514,6 +514,7 @@ static int mtk_drm_bind(struct device *dev)
err_deinit:
mtk_drm_kms_deinit(drm);
err_free:
+ private->drm = NULL;
drm_dev_put(drm);
return ret;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 328/885] ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (326 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 327/885] drm/mediatek: Clean dangling pointer on bind error path Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 329/885] dt-bindings: display: mediatek: Fix the fallback for mediatek,mt8186-disp-ccorr Greg Kroah-Hartman
` (559 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Charles Keepax,
Pierre-Louis Bossart, Kuninori Morimoto, Mark Brown, Sasha Levin
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[ Upstream commit ffe4c0f0bfaa571a676a0e946d4a6a0607f94294 ]
commit d3268a40d4b19f ("ASoC: soc-compress.c: fix NULL dereference")
enables DPCM capture, but it should independent from playback.
This patch fixup it.
Fixes: d3268a40d4b1 ("ASoC: soc-compress.c: fix NULL dereference")
Link: https://lore.kernel.org/r/87tu0i6j7j.wl-kuninori.morimoto.gx@renesas.com
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qnkvo1s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/soc-compress.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c
index 870f13e1d389c..cb0ed2fea893a 100644
--- a/sound/soc/soc-compress.c
+++ b/sound/soc/soc-compress.c
@@ -623,7 +623,7 @@ int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num)
rtd->fe_compr = 1;
if (rtd->dai_link->dpcm_playback)
be_pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream->private_data = rtd;
- else if (rtd->dai_link->dpcm_capture)
+ if (rtd->dai_link->dpcm_capture)
be_pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream->private_data = rtd;
memcpy(compr->ops, &soc_compr_dyn_ops, sizeof(soc_compr_dyn_ops));
} else {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 329/885] dt-bindings: display: mediatek: Fix the fallback for mediatek,mt8186-disp-ccorr
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (327 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 328/885] ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress() Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 330/885] gpio: vf610: connect GPIO label to dev name Greg Kroah-Hartman
` (558 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Allen-KH Cheng, Rob Herring,
Matthias Brugger, Chun-Kuang Hu, Sasha Levin
From: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
[ Upstream commit 137272ef1b0f17a1815fec00d583515a0163f85e ]
The mt8186-disp-ccorr is not fully compatible with the mt8183-disp-ccorr
implementation. It causes a crash when system resumes if it binds to the
device.
We should use mt8192-disp-ccorr as fallback of mt8186-disp-ccorr.
Fixes: 8a26ea19d4dc ("dt-bindings: display: mediatek: add MT8186 SoC binding")
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230118091829.755-10-allen-kh.cheng@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../devicetree/bindings/display/mediatek/mediatek,ccorr.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
index 63fb02014a56a..117e3db43f84a 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -32,7 +32,7 @@ properties:
- items:
- enum:
- mediatek,mt8186-disp-ccorr
- - const: mediatek,mt8183-disp-ccorr
+ - const: mediatek,mt8192-disp-ccorr
reg:
maxItems: 1
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 330/885] gpio: vf610: connect GPIO label to dev name
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (328 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 329/885] dt-bindings: display: mediatek: Fix the fallback for mediatek,mt8186-disp-ccorr Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 331/885] ASoC: topology: Properly access value coming from topology file Greg Kroah-Hartman
` (557 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Clark Wang, Haibo Chen,
Linus Walleij, Bartosz Golaszewski, Sasha Levin
From: Haibo Chen <haibo.chen@nxp.com>
[ Upstream commit 6f8ecb7f85f441eb7d78ba2a4df45ee8a821934e ]
Current GPIO label is fixed, so can't distinguish different GPIO
controllers through labels. Use dev name instead.
Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpio-vf610.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index 9db42f6a20439..a429176673e7a 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -304,7 +304,7 @@ static int vf610_gpio_probe(struct platform_device *pdev)
gc = &port->gc;
gc->parent = dev;
- gc->label = "vf610-gpio";
+ gc->label = dev_name(dev);
gc->ngpio = VF610_GPIO_PER_PORT;
gc->base = of_alias_get_id(np, "gpio") * VF610_GPIO_PER_PORT;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 331/885] ASoC: topology: Properly access value coming from topology file
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (329 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 330/885] gpio: vf610: connect GPIO label to dev name Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 332/885] spi: dw_bt1: fix MUX_MMIO dependencies Greg Kroah-Hartman
` (556 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Cezary Rojewski, Ranjani Sridharan,
Amadeusz Sławiński, Mark Brown, Sasha Levin
From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
[ Upstream commit c5d184c92df2b631fb81fe2ce6e96bfc5ba720e5 ]
When accessing values coming from topology, le32_to_cpu should be used.
One of recent commits missed that.
Fixes: 86e2d14b6d1a ("ASoC: topology: Add header payload_size verification")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/soc-topology.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index a79a2fb260b87..d68c48555a7e3 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2408,7 +2408,7 @@ static int soc_valid_header(struct soc_tplg *tplg,
return -EINVAL;
}
- if (soc_tplg_get_hdr_offset(tplg) + hdr->payload_size >= tplg->fw->size) {
+ if (soc_tplg_get_hdr_offset(tplg) + le32_to_cpu(hdr->payload_size) >= tplg->fw->size) {
dev_err(tplg->dev,
"ASoC: invalid header of type %d at offset %ld payload_size %d\n",
le32_to_cpu(hdr->type), soc_tplg_get_hdr_offset(tplg),
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 332/885] spi: dw_bt1: fix MUX_MMIO dependencies
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (330 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 331/885] ASoC: topology: Properly access value coming from topology file Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 333/885] ASoC: mchp-spdifrx: fix controls which rely on rsr register Greg Kroah-Hartman
` (555 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Serge Semin,
Mark Brown, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit d4bde04318c0d33705e9a77d4c7df72f262011e0 ]
Selecting a symbol with additional dependencies requires
adding the same dependency here:
WARNING: unmet direct dependencies detected for MUX_MMIO
Depends on [n]: MULTIPLEXER [=y] && OF [=n]
Selected by [y]:
- SPI_DW_BT1 [=y] && SPI [=y] && SPI_MASTER [=y] && SPI_DESIGNWARE [=y] && (MIPS_BAIKAL_T1 || COMPILE_TEST [=y])
Drop the 'select' here to avoid the problem. Anyone using
the dw-bt1 SPI driver should make sure they include the
mux driver as well now.
Fixes: 7218838109fe ("spi: dw-bt1: Fix undefined devm_mux_control_get symbol")
Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Link: https://lore.kernel.org/all/20221218192523.c6vnfo26ua6xqf26@mobilestation/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230130140156.3620863-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index d1bb62f7368b7..d4b969e68c314 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -295,7 +295,6 @@ config SPI_DW_BT1
tristate "Baikal-T1 SPI driver for DW SPI core"
depends on MIPS_BAIKAL_T1 || COMPILE_TEST
select MULTIPLEXER
- select MUX_MMIO
help
Baikal-T1 SoC is equipped with three DW APB SSI-based MMIO SPI
controllers. Two of them are pretty much normal: with IRQ, DMA,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 333/885] ASoC: mchp-spdifrx: fix controls which rely on rsr register
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (331 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 332/885] spi: dw_bt1: fix MUX_MMIO dependencies Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 334/885] ASoC: mchp-spdifrx: fix return value in case completion times out Greg Kroah-Hartman
` (554 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Claudiu Beznea, Mark Brown, Sasha Levin
From: Claudiu Beznea <claudiu.beznea@microchip.com>
[ Upstream commit fa09fa60385abbf99342494b280da8b4aebbc0e9 ]
The SPDIFRX block is clocked by 2 clocks: peripheral and generic clocks.
Peripheral clock feeds user interface (registers) and generic clock feeds
the receiver.
To enable the receiver the generic clock needs to be enabled and also the
ENABLE bit of MCHP_SPDIFRX_MR register need to be set.
The signal control exported by mchp-spdifrx driver reports wrong status
when the receiver is disabled. This can happen when requesting the signal
and the capture was not previously started. To solve this the receiver
needs to be enabled (by enabling generic clock and setting ENABLE bit of
MR register) before reading the signal status.
As with this fix there are 2 paths now that need to control the generic
clock and ENABLE bit of SPDIFRX_MR register (one path though controls, one
path though configuration) a mutex has been introduced. We can't rely on
subsystem locking as the controls are protected by
struct snd_card::controls_rwsem semaphore and configuration is protected
by a different lock (embedded in snd_pcm_stream_lock_irq()).
The introduction of mutex is also extended to other controls which rely on
SPDIFRX_RSR.ULOCK bit as it has been discovered experimentally that having
both clocks enabled but not the receiver (through ENABLE bit of SPDIFRX.MR)
leads to inconsistent values of SPDIFRX_RSR.ULOCK. Thus on some controls we
rely on software state (dev->trigger_enabled protected by mutex) to
retrieve proper values.
Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/atmel/mchp-spdifrx.c | 192 ++++++++++++++++++++++++---------
1 file changed, 142 insertions(+), 50 deletions(-)
diff --git a/sound/soc/atmel/mchp-spdifrx.c b/sound/soc/atmel/mchp-spdifrx.c
index ec0705cc40fab..2d86e0ec930fa 100644
--- a/sound/soc/atmel/mchp-spdifrx.c
+++ b/sound/soc/atmel/mchp-spdifrx.c
@@ -233,11 +233,13 @@ struct mchp_spdifrx_dev {
struct mchp_spdifrx_mixer_control control;
spinlock_t blockend_lock; /* protect access to blockend_refcount */
int blockend_refcount;
+ struct mutex mlock;
struct device *dev;
struct regmap *regmap;
struct clk *pclk;
struct clk *gclk;
unsigned int fmt;
+ unsigned int trigger_enabled;
unsigned int gclk_enabled:1;
};
@@ -353,47 +355,40 @@ static int mchp_spdifrx_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
- u32 mr;
- int running;
- int ret;
-
- regmap_read(dev->regmap, SPDIFRX_MR, &mr);
- running = !!(mr & SPDIFRX_MR_RXEN_ENABLE);
+ int ret = 0;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- if (!running) {
- mr &= ~SPDIFRX_MR_RXEN_MASK;
- mr |= SPDIFRX_MR_RXEN_ENABLE;
- /* enable overrun interrupts */
- regmap_write(dev->regmap, SPDIFRX_IER,
- SPDIFRX_IR_OVERRUN);
- }
+ mutex_lock(&dev->mlock);
+ /* Enable overrun interrupts */
+ regmap_write(dev->regmap, SPDIFRX_IER, SPDIFRX_IR_OVERRUN);
+
+ /* Enable receiver. */
+ regmap_update_bits(dev->regmap, SPDIFRX_MR, SPDIFRX_MR_RXEN_MASK,
+ SPDIFRX_MR_RXEN_ENABLE);
+ dev->trigger_enabled = true;
+ mutex_unlock(&dev->mlock);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- if (running) {
- mr &= ~SPDIFRX_MR_RXEN_MASK;
- mr |= SPDIFRX_MR_RXEN_DISABLE;
- /* disable overrun interrupts */
- regmap_write(dev->regmap, SPDIFRX_IDR,
- SPDIFRX_IR_OVERRUN);
- }
+ mutex_lock(&dev->mlock);
+ /* Disable overrun interrupts */
+ regmap_write(dev->regmap, SPDIFRX_IDR, SPDIFRX_IR_OVERRUN);
+
+ /* Disable receiver. */
+ regmap_update_bits(dev->regmap, SPDIFRX_MR, SPDIFRX_MR_RXEN_MASK,
+ SPDIFRX_MR_RXEN_DISABLE);
+ dev->trigger_enabled = false;
+ mutex_unlock(&dev->mlock);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
}
- ret = regmap_write(dev->regmap, SPDIFRX_MR, mr);
- if (ret) {
- dev_err(dev->dev, "unable to enable/disable RX: %d\n", ret);
- return ret;
- }
-
- return 0;
+ return ret;
}
static int mchp_spdifrx_hw_params(struct snd_pcm_substream *substream,
@@ -413,13 +408,6 @@ static int mchp_spdifrx_hw_params(struct snd_pcm_substream *substream,
return -EINVAL;
}
- regmap_read(dev->regmap, SPDIFRX_MR, &mr);
-
- if (mr & SPDIFRX_MR_RXEN_ENABLE) {
- dev_err(dev->dev, "PCM already running\n");
- return -EBUSY;
- }
-
if (params_channels(params) != SPDIFRX_CHANNELS) {
dev_err(dev->dev, "unsupported number of channels: %d\n",
params_channels(params));
@@ -445,6 +433,13 @@ static int mchp_spdifrx_hw_params(struct snd_pcm_substream *substream,
return -EINVAL;
}
+ mutex_lock(&dev->mlock);
+ if (dev->trigger_enabled) {
+ dev_err(dev->dev, "PCM already running\n");
+ ret = -EBUSY;
+ goto unlock;
+ }
+
if (dev->gclk_enabled) {
clk_disable_unprepare(dev->gclk);
dev->gclk_enabled = 0;
@@ -455,19 +450,24 @@ static int mchp_spdifrx_hw_params(struct snd_pcm_substream *substream,
dev_err(dev->dev,
"unable to set gclk min rate: rate %u * ratio %u + 1\n",
params_rate(params), SPDIFRX_GCLK_RATIO_MIN);
- return ret;
+ goto unlock;
}
ret = clk_prepare_enable(dev->gclk);
if (ret) {
dev_err(dev->dev, "unable to enable gclk: %d\n", ret);
- return ret;
+ goto unlock;
}
dev->gclk_enabled = 1;
dev_dbg(dev->dev, "GCLK range min set to %d\n",
params_rate(params) * SPDIFRX_GCLK_RATIO_MIN + 1);
- return regmap_write(dev->regmap, SPDIFRX_MR, mr);
+ ret = regmap_write(dev->regmap, SPDIFRX_MR, mr);
+
+unlock:
+ mutex_unlock(&dev->mlock);
+
+ return ret;
}
static int mchp_spdifrx_hw_free(struct snd_pcm_substream *substream,
@@ -475,10 +475,12 @@ static int mchp_spdifrx_hw_free(struct snd_pcm_substream *substream,
{
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
+ mutex_lock(&dev->mlock);
if (dev->gclk_enabled) {
clk_disable_unprepare(dev->gclk);
dev->gclk_enabled = 0;
}
+ mutex_unlock(&dev->mlock);
return 0;
}
@@ -627,10 +629,24 @@ static int mchp_spdifrx_ulock_get(struct snd_kcontrol *kcontrol,
u32 val;
bool ulock_old = ctrl->ulock;
- regmap_read(dev->regmap, SPDIFRX_RSR, &val);
- ctrl->ulock = !(val & SPDIFRX_RSR_ULOCK);
+ mutex_lock(&dev->mlock);
+
+ /*
+ * The RSR.ULOCK has wrong value if both pclk and gclk are enabled
+ * and the receiver is disabled. Thus we take into account the
+ * dev->trigger_enabled here to return a real status.
+ */
+ if (dev->trigger_enabled) {
+ regmap_read(dev->regmap, SPDIFRX_RSR, &val);
+ ctrl->ulock = !(val & SPDIFRX_RSR_ULOCK);
+ } else {
+ ctrl->ulock = 0;
+ }
+
uvalue->value.integer.value[0] = ctrl->ulock;
+ mutex_unlock(&dev->mlock);
+
return ulock_old != ctrl->ulock;
}
@@ -643,8 +659,22 @@ static int mchp_spdifrx_badf_get(struct snd_kcontrol *kcontrol,
u32 val;
bool badf_old = ctrl->badf;
- regmap_read(dev->regmap, SPDIFRX_RSR, &val);
- ctrl->badf = !!(val & SPDIFRX_RSR_BADF);
+ mutex_lock(&dev->mlock);
+
+ /*
+ * The RSR.ULOCK has wrong value if both pclk and gclk are enabled
+ * and the receiver is disabled. Thus we take into account the
+ * dev->trigger_enabled here to return a real status.
+ */
+ if (dev->trigger_enabled) {
+ regmap_read(dev->regmap, SPDIFRX_RSR, &val);
+ ctrl->badf = !!(val & SPDIFRX_RSR_BADF);
+ } else {
+ ctrl->badf = 0;
+ }
+
+ mutex_unlock(&dev->mlock);
+
uvalue->value.integer.value[0] = ctrl->badf;
return badf_old != ctrl->badf;
@@ -656,11 +686,48 @@ static int mchp_spdifrx_signal_get(struct snd_kcontrol *kcontrol,
struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
- u32 val;
+ u32 val = ~0U, loops = 10;
+ int ret;
bool signal_old = ctrl->signal;
- regmap_read(dev->regmap, SPDIFRX_RSR, &val);
- ctrl->signal = !(val & SPDIFRX_RSR_NOSIGNAL);
+ mutex_lock(&dev->mlock);
+
+ /*
+ * To get the signal we need to have receiver enabled. This
+ * could be enabled also from trigger() function thus we need to
+ * take care of not disabling the receiver when it runs.
+ */
+ if (!dev->trigger_enabled) {
+ ret = clk_prepare_enable(dev->gclk);
+ if (ret)
+ goto unlock;
+
+ regmap_update_bits(dev->regmap, SPDIFRX_MR, SPDIFRX_MR_RXEN_MASK,
+ SPDIFRX_MR_RXEN_ENABLE);
+
+ /* Wait for RSR.ULOCK bit. */
+ while (--loops) {
+ regmap_read(dev->regmap, SPDIFRX_RSR, &val);
+ if (!(val & SPDIFRX_RSR_ULOCK))
+ break;
+ usleep_range(100, 150);
+ }
+
+ regmap_update_bits(dev->regmap, SPDIFRX_MR, SPDIFRX_MR_RXEN_MASK,
+ SPDIFRX_MR_RXEN_DISABLE);
+
+ clk_disable_unprepare(dev->gclk);
+ } else {
+ regmap_read(dev->regmap, SPDIFRX_RSR, &val);
+ }
+
+unlock:
+ mutex_unlock(&dev->mlock);
+
+ if (!(val & SPDIFRX_RSR_ULOCK))
+ ctrl->signal = !(val & SPDIFRX_RSR_NOSIGNAL);
+ else
+ ctrl->signal = 0;
uvalue->value.integer.value[0] = ctrl->signal;
return signal_old != ctrl->signal;
@@ -685,18 +752,32 @@ static int mchp_spdifrx_rate_get(struct snd_kcontrol *kcontrol,
u32 val;
int rate;
- regmap_read(dev->regmap, SPDIFRX_RSR, &val);
-
- /* if the receiver is not locked, ISF data is invalid */
- if (val & SPDIFRX_RSR_ULOCK || !(val & SPDIFRX_RSR_IFS_MASK)) {
+ mutex_lock(&dev->mlock);
+
+ /*
+ * The RSR.ULOCK has wrong value if both pclk and gclk are enabled
+ * and the receiver is disabled. Thus we take into account the
+ * dev->trigger_enabled here to return a real status.
+ */
+ if (dev->trigger_enabled) {
+ regmap_read(dev->regmap, SPDIFRX_RSR, &val);
+ /* If the receiver is not locked, ISF data is invalid. */
+ if (val & SPDIFRX_RSR_ULOCK || !(val & SPDIFRX_RSR_IFS_MASK)) {
+ ucontrol->value.integer.value[0] = 0;
+ goto unlock;
+ }
+ } else {
+ /* Reveicer is not locked, IFS data is invalid. */
ucontrol->value.integer.value[0] = 0;
- return 0;
+ goto unlock;
}
rate = clk_get_rate(dev->gclk);
ucontrol->value.integer.value[0] = rate / (32 * SPDIFRX_RSR_IFS(val));
+unlock:
+ mutex_unlock(&dev->mlock);
return 0;
}
@@ -913,7 +994,18 @@ static int mchp_spdifrx_probe(struct platform_device *pdev)
"failed to get the PMC generated clock: %d\n", err);
return err;
}
+
+ /*
+ * Signal control need a valid rate on gclk. hw_params() configures
+ * it propertly but requesting signal before any hw_params() has been
+ * called lead to invalid value returned for signal. Thus, configure
+ * gclk at a valid rate, here, in initialization, to simplify the
+ * control path.
+ */
+ clk_set_min_rate(dev->gclk, 48000 * SPDIFRX_GCLK_RATIO_MIN + 1);
+
spin_lock_init(&dev->blockend_lock);
+ mutex_init(&dev->mlock);
dev->dev = &pdev->dev;
dev->regmap = regmap;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 334/885] ASoC: mchp-spdifrx: fix return value in case completion times out
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (332 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 333/885] ASoC: mchp-spdifrx: fix controls which rely on rsr register Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 335/885] ASoC: mchp-spdifrx: fix controls that works with completion mechanism Greg Kroah-Hartman
` (553 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Claudiu Beznea, Mark Brown, Sasha Levin
From: Claudiu Beznea <claudiu.beznea@microchip.com>
[ Upstream commit a4c4161d6eae3ef5f486d1638ef452d9bc1376b0 ]
wait_for_completion_interruptible_timeout() returns 0 in case of
timeout. Check this into account when returning from function.
Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/atmel/mchp-spdifrx.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/sound/soc/atmel/mchp-spdifrx.c b/sound/soc/atmel/mchp-spdifrx.c
index 2d86e0ec930fa..7f359371b31bf 100644
--- a/sound/soc/atmel/mchp-spdifrx.c
+++ b/sound/soc/atmel/mchp-spdifrx.c
@@ -524,9 +524,10 @@ static int mchp_spdifrx_cs_get(struct mchp_spdifrx_dev *dev,
ret = wait_for_completion_interruptible_timeout(&ch_stat->done,
msecs_to_jiffies(100));
/* IP might not be started or valid stream might not be present */
- if (ret < 0) {
+ if (ret <= 0) {
dev_dbg(dev->dev, "channel status for channel %d timeout\n",
channel);
+ return ret ? : -ETIMEDOUT;
}
memcpy(uvalue->value.iec958.status, ch_stat->data,
@@ -580,7 +581,7 @@ static int mchp_spdifrx_subcode_ch_get(struct mchp_spdifrx_dev *dev,
dev_dbg(dev->dev, "user data for channel %d timeout\n",
channel);
mchp_spdifrx_isr_blockend_dis(dev);
- return ret;
+ return ret ? : -ETIMEDOUT;
}
spin_lock_irqsave(&user_data->lock, flags);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 335/885] ASoC: mchp-spdifrx: fix controls that works with completion mechanism
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (333 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 334/885] ASoC: mchp-spdifrx: fix return value in case completion times out Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 336/885] ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove() Greg Kroah-Hartman
` (552 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Claudiu Beznea, Mark Brown, Sasha Levin
From: Claudiu Beznea <claudiu.beznea@microchip.com>
[ Upstream commit d3681df44e856aab523a6eb7ba15b5e41efcbb1c ]
Channel status get and channel subcode get controls relies on data
returned by controls when certain IRQs are raised. To achieve that
completions are used b/w controls and interrupt service routine. The
concurrent accesses to these controls are protected by
struct snd_card::controls_rwsem.
Issues identified:
- reinit_completion() may be called while waiting for completion
which should be avoided
- in case of multiple threads waiting, the complete() call in interrupt
will signal only one waiting thread per interrupt which may lead to
timeout for the others
- in case of channel status get as the CSC interrupt is not refcounted
ISR may disable interrupt for threads that were just enabled it.
To solve these the access to controls were protected by a mutex. Along
with this there is no need for spinlock to protect the software cache
reads/updates b/w controls and ISR as the update is happening only when
requested from control, and only one reader can reach the control.
Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-4-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/atmel/mchp-spdifrx.c | 143 ++++++++++++++++++---------------
1 file changed, 77 insertions(+), 66 deletions(-)
diff --git a/sound/soc/atmel/mchp-spdifrx.c b/sound/soc/atmel/mchp-spdifrx.c
index 7f359371b31bf..31ffaaf46dec0 100644
--- a/sound/soc/atmel/mchp-spdifrx.c
+++ b/sound/soc/atmel/mchp-spdifrx.c
@@ -217,7 +217,6 @@ struct mchp_spdifrx_ch_stat {
struct mchp_spdifrx_user_data {
unsigned char data[SPDIFRX_UD_BITS / 8];
struct completion done;
- spinlock_t lock; /* protect access to user data */
};
struct mchp_spdifrx_mixer_control {
@@ -231,8 +230,6 @@ struct mchp_spdifrx_mixer_control {
struct mchp_spdifrx_dev {
struct snd_dmaengine_dai_dma_data capture;
struct mchp_spdifrx_mixer_control control;
- spinlock_t blockend_lock; /* protect access to blockend_refcount */
- int blockend_refcount;
struct mutex mlock;
struct device *dev;
struct regmap *regmap;
@@ -277,37 +274,11 @@ static void mchp_spdifrx_channel_user_data_read(struct mchp_spdifrx_dev *dev,
}
}
-/* called from non-atomic context only */
-static void mchp_spdifrx_isr_blockend_en(struct mchp_spdifrx_dev *dev)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dev->blockend_lock, flags);
- dev->blockend_refcount++;
- /* don't enable BLOCKEND interrupt if it's already enabled */
- if (dev->blockend_refcount == 1)
- regmap_write(dev->regmap, SPDIFRX_IER, SPDIFRX_IR_BLOCKEND);
- spin_unlock_irqrestore(&dev->blockend_lock, flags);
-}
-
-/* called from atomic/non-atomic context */
-static void mchp_spdifrx_isr_blockend_dis(struct mchp_spdifrx_dev *dev)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dev->blockend_lock, flags);
- dev->blockend_refcount--;
- /* don't enable BLOCKEND interrupt if it's already enabled */
- if (dev->blockend_refcount == 0)
- regmap_write(dev->regmap, SPDIFRX_IDR, SPDIFRX_IR_BLOCKEND);
- spin_unlock_irqrestore(&dev->blockend_lock, flags);
-}
-
static irqreturn_t mchp_spdif_interrupt(int irq, void *dev_id)
{
struct mchp_spdifrx_dev *dev = dev_id;
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
- u32 sr, imr, pending, idr = 0;
+ u32 sr, imr, pending;
irqreturn_t ret = IRQ_NONE;
int ch;
@@ -322,13 +293,10 @@ static irqreturn_t mchp_spdif_interrupt(int irq, void *dev_id)
if (pending & SPDIFRX_IR_BLOCKEND) {
for (ch = 0; ch < SPDIFRX_CHANNELS; ch++) {
- spin_lock(&ctrl->user_data[ch].lock);
mchp_spdifrx_channel_user_data_read(dev, ch);
- spin_unlock(&ctrl->user_data[ch].lock);
-
complete(&ctrl->user_data[ch].done);
}
- mchp_spdifrx_isr_blockend_dis(dev);
+ regmap_write(dev->regmap, SPDIFRX_IDR, SPDIFRX_IR_BLOCKEND);
ret = IRQ_HANDLED;
}
@@ -336,7 +304,7 @@ static irqreturn_t mchp_spdif_interrupt(int irq, void *dev_id)
if (pending & SPDIFRX_IR_CSC(ch)) {
mchp_spdifrx_channel_status_read(dev, ch);
complete(&ctrl->ch_stat[ch].done);
- idr |= SPDIFRX_IR_CSC(ch);
+ regmap_write(dev->regmap, SPDIFRX_IDR, SPDIFRX_IR_CSC(ch));
ret = IRQ_HANDLED;
}
}
@@ -346,8 +314,6 @@ static irqreturn_t mchp_spdif_interrupt(int irq, void *dev_id)
ret = IRQ_HANDLED;
}
- regmap_write(dev->regmap, SPDIFRX_IDR, idr);
-
return ret;
}
@@ -517,23 +483,51 @@ static int mchp_spdifrx_cs_get(struct mchp_spdifrx_dev *dev,
{
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
struct mchp_spdifrx_ch_stat *ch_stat = &ctrl->ch_stat[channel];
- int ret;
+ int ret = 0;
+
+ mutex_lock(&dev->mlock);
- regmap_write(dev->regmap, SPDIFRX_IER, SPDIFRX_IR_CSC(channel));
- /* check for new data available */
- ret = wait_for_completion_interruptible_timeout(&ch_stat->done,
- msecs_to_jiffies(100));
- /* IP might not be started or valid stream might not be present */
- if (ret <= 0) {
- dev_dbg(dev->dev, "channel status for channel %d timeout\n",
- channel);
- return ret ? : -ETIMEDOUT;
+ /*
+ * We may reach this point with both clocks enabled but the receiver
+ * still disabled. To void waiting for completion and return with
+ * timeout check the dev->trigger_enabled.
+ *
+ * To retrieve data:
+ * - if the receiver is enabled CSC IRQ will update the data in software
+ * caches (ch_stat->data)
+ * - otherwise we just update it here the software caches with latest
+ * available information and return it; in this case we don't need
+ * spin locking as the IRQ is disabled and will not be raised from
+ * anywhere else.
+ */
+
+ if (dev->trigger_enabled) {
+ reinit_completion(&ch_stat->done);
+ regmap_write(dev->regmap, SPDIFRX_IER, SPDIFRX_IR_CSC(channel));
+ /* Check for new data available */
+ ret = wait_for_completion_interruptible_timeout(&ch_stat->done,
+ msecs_to_jiffies(100));
+ /* Valid stream might not be present */
+ if (ret <= 0) {
+ dev_dbg(dev->dev, "channel status for channel %d timeout\n",
+ channel);
+ regmap_write(dev->regmap, SPDIFRX_IDR, SPDIFRX_IR_CSC(channel));
+ ret = ret ? : -ETIMEDOUT;
+ goto unlock;
+ } else {
+ ret = 0;
+ }
+ } else {
+ /* Update software cache with latest channel status. */
+ mchp_spdifrx_channel_status_read(dev, channel);
}
memcpy(uvalue->value.iec958.status, ch_stat->data,
sizeof(ch_stat->data));
- return 0;
+unlock:
+ mutex_unlock(&dev->mlock);
+ return ret;
}
static int mchp_spdifrx_cs1_get(struct snd_kcontrol *kcontrol,
@@ -567,29 +561,49 @@ static int mchp_spdifrx_subcode_ch_get(struct mchp_spdifrx_dev *dev,
int channel,
struct snd_ctl_elem_value *uvalue)
{
- unsigned long flags;
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
struct mchp_spdifrx_user_data *user_data = &ctrl->user_data[channel];
- int ret;
+ int ret = 0;
+
+ mutex_lock(&dev->mlock);
+
+ /*
+ * We may reach this point with both clocks enabled but the receiver
+ * still disabled. To void waiting for completion to just timeout we
+ * check here the dev->trigger_enabled flag.
+ *
+ * To retrieve data:
+ * - if the receiver is enabled we need to wait for blockend IRQ to read
+ * data to and update it for us in software caches
+ * - otherwise reading the SPDIFRX_CHUD() registers is enough.
+ */
- reinit_completion(&user_data->done);
- mchp_spdifrx_isr_blockend_en(dev);
- ret = wait_for_completion_interruptible_timeout(&user_data->done,
- msecs_to_jiffies(100));
- /* IP might not be started or valid stream might not be present */
- if (ret <= 0) {
- dev_dbg(dev->dev, "user data for channel %d timeout\n",
- channel);
- mchp_spdifrx_isr_blockend_dis(dev);
- return ret ? : -ETIMEDOUT;
+ if (dev->trigger_enabled) {
+ reinit_completion(&user_data->done);
+ regmap_write(dev->regmap, SPDIFRX_IER, SPDIFRX_IR_BLOCKEND);
+ ret = wait_for_completion_interruptible_timeout(&user_data->done,
+ msecs_to_jiffies(100));
+ /* Valid stream might not be present. */
+ if (ret <= 0) {
+ dev_dbg(dev->dev, "user data for channel %d timeout\n",
+ channel);
+ regmap_write(dev->regmap, SPDIFRX_IDR, SPDIFRX_IR_BLOCKEND);
+ ret = ret ? : -ETIMEDOUT;
+ goto unlock;
+ } else {
+ ret = 0;
+ }
+ } else {
+ /* Update software cache with last available data. */
+ mchp_spdifrx_channel_user_data_read(dev, channel);
}
- spin_lock_irqsave(&user_data->lock, flags);
memcpy(uvalue->value.iec958.subcode, user_data->data,
sizeof(user_data->data));
- spin_unlock_irqrestore(&user_data->lock, flags);
- return 0;
+unlock:
+ mutex_unlock(&dev->mlock);
+ return ret;
}
static int mchp_spdifrx_subcode_ch1_get(struct snd_kcontrol *kcontrol,
@@ -890,11 +904,9 @@ static int mchp_spdifrx_dai_probe(struct snd_soc_dai *dai)
SPDIFRX_MR_AUTORST_NOACTION |
SPDIFRX_MR_PACK_DISABLED);
- dev->blockend_refcount = 0;
for (ch = 0; ch < SPDIFRX_CHANNELS; ch++) {
init_completion(&ctrl->ch_stat[ch].done);
init_completion(&ctrl->user_data[ch].done);
- spin_lock_init(&ctrl->user_data[ch].lock);
}
/* Add controls */
@@ -1005,7 +1017,6 @@ static int mchp_spdifrx_probe(struct platform_device *pdev)
*/
clk_set_min_rate(dev->gclk, 48000 * SPDIFRX_GCLK_RATIO_MIN + 1);
- spin_lock_init(&dev->blockend_lock);
mutex_init(&dev->mlock);
dev->dev = &pdev->dev;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 336/885] ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (334 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 335/885] ASoC: mchp-spdifrx: fix controls that works with completion mechanism Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 337/885] dm: improve shrinker debug names Greg Kroah-Hartman
` (551 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Claudiu Beznea, Mark Brown, Sasha Levin
From: Claudiu Beznea <claudiu.beznea@microchip.com>
[ Upstream commit aaecdc32b7e35b4f9b457fb3509414aa9a932589 ]
CSC interrupts which might be used in controls are on bits 8 and 9 of
SPDIFRX_IDR register. Thus disable all the interrupts that are exported
by driver.
Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-5-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/atmel/mchp-spdifrx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/atmel/mchp-spdifrx.c b/sound/soc/atmel/mchp-spdifrx.c
index 31ffaaf46dec0..b81fc77728dfc 100644
--- a/sound/soc/atmel/mchp-spdifrx.c
+++ b/sound/soc/atmel/mchp-spdifrx.c
@@ -921,7 +921,7 @@ static int mchp_spdifrx_dai_remove(struct snd_soc_dai *dai)
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
/* Disable interrupts */
- regmap_write(dev->regmap, SPDIFRX_IDR, 0xFF);
+ regmap_write(dev->regmap, SPDIFRX_IDR, GENMASK(14, 0));
clk_disable_unprepare(dev->pclk);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 337/885] dm: improve shrinker debug names
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (335 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 336/885] ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove() Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 338/885] regmap: apply reg_base and reg_downshift for single register ops Greg Kroah-Hartman
` (550 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Sasha Levin
From: Mike Snitzer <snitzer@kernel.org>
[ Upstream commit c87791bcc455a91e51ca9800faaacc21c8d67785 ]
Commit e33c267ab70d ("mm: shrinkers: provide shrinkers with names")
chose some fairly bad names for DM's shrinkers.
Fixes: e33c267ab70d ("mm: shrinkers: provide shrinkers with names")
Signed-off-by : Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/dm-bufio.c | 2 +-
drivers/md/dm-zoned-metadata.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c
index bb786c39545ec..19caaf684ee34 100644
--- a/drivers/md/dm-bufio.c
+++ b/drivers/md/dm-bufio.c
@@ -1833,7 +1833,7 @@ struct dm_bufio_client *dm_bufio_client_create(struct block_device *bdev, unsign
c->shrinker.scan_objects = dm_bufio_shrink_scan;
c->shrinker.seeks = 1;
c->shrinker.batch = 0;
- r = register_shrinker(&c->shrinker, "md-%s:(%u:%u)", slab_name,
+ r = register_shrinker(&c->shrinker, "dm-bufio:(%u:%u)",
MAJOR(bdev->bd_dev), MINOR(bdev->bd_dev));
if (r)
goto bad;
diff --git a/drivers/md/dm-zoned-metadata.c b/drivers/md/dm-zoned-metadata.c
index 0278482fac94a..c795ea7da7917 100644
--- a/drivers/md/dm-zoned-metadata.c
+++ b/drivers/md/dm-zoned-metadata.c
@@ -2945,7 +2945,7 @@ int dmz_ctr_metadata(struct dmz_dev *dev, int num_dev,
zmd->mblk_shrinker.seeks = DEFAULT_SEEKS;
/* Metadata cache shrinker */
- ret = register_shrinker(&zmd->mblk_shrinker, "md-meta:(%u:%u)",
+ ret = register_shrinker(&zmd->mblk_shrinker, "dm-zoned-meta:(%u:%u)",
MAJOR(dev->bdev->bd_dev),
MINOR(dev->bdev->bd_dev));
if (ret) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 338/885] regmap: apply reg_base and reg_downshift for single register ops
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (336 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 337/885] dm: improve shrinker debug names Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 339/885] ASoC: rsnd: fixup #endif position Greg Kroah-Hartman
` (549 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Daniel Golle, Colin Foster,
Mark Brown, Sasha Levin
From: Daniel Golle <daniel@makrotopia.org>
[ Upstream commit 697c3892d825fb78f42ec8e53bed065dd728db3e ]
reg_base and reg_downshift currently don't have any effect if used with
a regmap_bus or regmap_config which only offers single register
operations (ie. reg_read, reg_write and optionally reg_update_bits).
Fix that and take them into account also for regmap_bus with only
reg_read and read_write operations by applying reg_base and
reg_downshift in _regmap_bus_reg_write, _regmap_bus_reg_read.
Also apply reg_base and reg_downshift in _regmap_update_bits, but only
in case the operation is carried out with a reg_update_bits call
defined in either regmap_bus or regmap_config.
Fixes: 0074f3f2b1e43d ("regmap: allow a defined reg_base to be added to every address")
Fixes: 86fc59ef818beb ("regmap: add configurable downshift for addresses")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/Y9clyVS3tQEHlUhA@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/regmap/regmap.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index c6d6d53e8cd3f..7de1f27d0323d 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1942,6 +1942,8 @@ static int _regmap_bus_reg_write(void *context, unsigned int reg,
{
struct regmap *map = context;
+ reg += map->reg_base;
+ reg >>= map->format.reg_downshift;
return map->bus->reg_write(map->bus_context, reg, val);
}
@@ -2840,6 +2842,8 @@ static int _regmap_bus_reg_read(void *context, unsigned int reg,
{
struct regmap *map = context;
+ reg += map->reg_base;
+ reg >>= map->format.reg_downshift;
return map->bus->reg_read(map->bus_context, reg, val);
}
@@ -3231,6 +3235,8 @@ static int _regmap_update_bits(struct regmap *map, unsigned int reg,
*change = false;
if (regmap_volatile(map, reg) && map->reg_update_bits) {
+ reg += map->reg_base;
+ reg >>= map->format.reg_downshift;
ret = map->reg_update_bits(map->bus_context, reg, mask, val);
if (ret == 0 && change)
*change = true;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 339/885] ASoC: rsnd: fixup #endif position
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (337 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 338/885] regmap: apply reg_base and reg_downshift for single register ops Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 340/885] ASoC: mchp-spdifrx: Fix uninitialized use of mr in mchp_spdifrx_hw_params() Greg Kroah-Hartman
` (548 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kuninori Morimoto, Mark Brown, Sasha Levin
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[ Upstream commit 49123b51cd896e00b256a27c2ce9e6bfe1bbc22f ]
commit 1f9c82b5ab83ff2 ("ASoC: rsnd: add debugfs support") added
CONFIG_DEBUG_FS related definitions on rsnd.h, but it should be
added inside of RSND_H. This patch fixup it.
Fixes: 1f9c82b5ab83 ("ASoC: rsnd: add debugfs support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877cx26t7r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/sh/rcar/rsnd.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h
index d9cd190d7e198..f8ef6836ef84e 100644
--- a/sound/soc/sh/rcar/rsnd.h
+++ b/sound/soc/sh/rcar/rsnd.h
@@ -901,8 +901,6 @@ void rsnd_mod_make_sure(struct rsnd_mod *mod, enum rsnd_mod_type type);
if (!IS_BUILTIN(RSND_DEBUG_NO_DAI_CALL)) \
dev_dbg(dev, param)
-#endif
-
#ifdef CONFIG_DEBUG_FS
int rsnd_debugfs_probe(struct snd_soc_component *component);
void rsnd_debugfs_reg_show(struct seq_file *m, phys_addr_t _addr,
@@ -913,3 +911,5 @@ void rsnd_debugfs_mod_reg_show(struct seq_file *m, struct rsnd_mod *mod,
#else
#define rsnd_debugfs_probe NULL
#endif
+
+#endif /* RSND_H */
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 340/885] ASoC: mchp-spdifrx: Fix uninitialized use of mr in mchp_spdifrx_hw_params()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (338 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 339/885] ASoC: rsnd: fixup #endif position Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 341/885] ASoC: dt-bindings: meson: fix gx-card codec node regex Greg Kroah-Hartman
` (547 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nathan Chancellor, Claudiu Beznea,
Mark Brown, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 218674a45930c700486d27b765bf2f1b43f8cbf7 ]
Clang warns:
../sound/soc/atmel/mchp-spdifrx.c:455:3: error: variable 'mr' is uninitialized when used here [-Werror,-Wuninitialized]
mr |= SPDIFRX_MR_ENDIAN_BIG;
^~
../sound/soc/atmel/mchp-spdifrx.c:432:8: note: initialize the variable 'mr' to silence this warning
u32 mr;
^
= 0
1 error generated.
Zero initialize mr so that these bitwise OR and assignment operation
works unconditionally.
Fixes: fa09fa60385a ("ASoC: mchp-spdifrx: fix controls which rely on rsr register")
Link: https://github.com/ClangBuiltLinux/linux/issues/1797
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230202-mchp-spdifrx-fix-uninit-mr-v1-1-629a045d7a2f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/atmel/mchp-spdifrx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/atmel/mchp-spdifrx.c b/sound/soc/atmel/mchp-spdifrx.c
index b81fc77728dfc..76ce37f641ebd 100644
--- a/sound/soc/atmel/mchp-spdifrx.c
+++ b/sound/soc/atmel/mchp-spdifrx.c
@@ -362,7 +362,7 @@ static int mchp_spdifrx_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
- u32 mr;
+ u32 mr = 0;
int ret;
dev_dbg(dev->dev, "%s() rate=%u format=%#x width=%u channels=%u\n",
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 341/885] ASoC: dt-bindings: meson: fix gx-card codec node regex
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (339 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 340/885] ASoC: mchp-spdifrx: Fix uninitialized use of mr in mchp_spdifrx_hw_params() Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 342/885] regulator: tps65219: use generic set_bypass() Greg Kroah-Hartman
` (546 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jerome Brunet, Krzysztof Kozlowski,
Mark Brown, Sasha Levin
From: Jerome Brunet <jbrunet@baylibre.com>
[ Upstream commit 480b26226873c88e482575ceb0d0a38d76e1be57 ]
'codec' is a valid node name when there is a single codec
in the link. Fix the node regular expression to apply this.
Fixes: fd00366b8e41 ("ASoC: meson: gx: add sound card dt-binding documentation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230202183653.486216-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../devicetree/bindings/sound/amlogic,gx-sound-card.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index 5b8d59245f82f..b358fd601ed38 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -62,7 +62,7 @@ patternProperties:
description: phandle of the CPU DAI
patternProperties:
- "^codec-[0-9]+$":
+ "^codec(-[0-9]+)?$":
type: object
additionalProperties: false
description: |-
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 342/885] regulator: tps65219: use generic set_bypass()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (340 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 341/885] ASoC: dt-bindings: meson: fix gx-card codec node regex Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 343/885] hwmon: (asus-ec-sensors) add missing mutex path Greg Kroah-Hartman
` (545 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jerome Neanne, Mark Brown, Sasha Levin
From: Jerome Neanne <jneanne@baylibre.com>
[ Upstream commit 0365df81145a4cfaae5f4da896160de512256e6d ]
Due to wrong interpretation of the specification,
custom implementation was used instead of standard regmap helper.
LINK: https://lore.kernel.org/all/c2014039-f1e8-6976-33d6-52e2dd4e7b66@baylibre.com/
Fixes: c12ac5fc3e0a ("regulator: drivers: Add TI TPS65219 PMIC regulators support")
Regulator does NOT require to be off to be switched to bypass mode.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Link: https://lore.kernel.org/r/20230203140119.13029-1-jneanne@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/tps65219-regulator.c | 20 +-------------------
1 file changed, 1 insertion(+), 19 deletions(-)
diff --git a/drivers/regulator/tps65219-regulator.c b/drivers/regulator/tps65219-regulator.c
index 070159cb5f094..58f6541b6417b 100644
--- a/drivers/regulator/tps65219-regulator.c
+++ b/drivers/regulator/tps65219-regulator.c
@@ -173,24 +173,6 @@ static unsigned int tps65219_get_mode(struct regulator_dev *dev)
return REGULATOR_MODE_NORMAL;
}
-/*
- * generic regulator_set_bypass_regmap does not fully match requirements
- * TPS65219 Requires explicitly that regulator is disabled before switch
- */
-static int tps65219_set_bypass(struct regulator_dev *dev, bool enable)
-{
- struct tps65219 *tps = rdev_get_drvdata(dev);
- unsigned int rid = rdev_get_id(dev);
-
- if (dev->desc->ops->is_enabled(dev)) {
- dev_err(tps->dev,
- "%s LDO%d enabled, must be shut down to set bypass ",
- __func__, rid);
- return -EBUSY;
- }
- return regulator_set_bypass_regmap(dev, enable);
-}
-
/* Operations permitted on BUCK1/2/3 */
static const struct regulator_ops tps65219_bucks_ops = {
.is_enabled = regulator_is_enabled_regmap,
@@ -217,7 +199,7 @@ static const struct regulator_ops tps65219_ldos_1_2_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
- .set_bypass = tps65219_set_bypass,
+ .set_bypass = regulator_set_bypass_regmap,
.get_bypass = regulator_get_bypass_regmap,
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 343/885] hwmon: (asus-ec-sensors) add missing mutex path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (341 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 342/885] regulator: tps65219: use generic set_bypass() Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 344/885] hwmon: (ltc2945) Handle error case in ltc2945_value_store Greg Kroah-Hartman
` (544 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eugene Shalygin, Guenter Roeck, Sasha Levin
From: Eugene Shalygin <eugene.shalygin@gmail.com>
[ Upstream commit e2de0e6abd91b05411cb1f0953115dbbbe9b11ce ]
Add missing mutex path for ProArt X570-CREATOR WIFI.
Fixes: de8fbac5e59e (hwmon: (asus-ec-sensors) implement locking via the ACPI global lock)
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20230121111728.168514-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/asus-ec-sensors.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c
index a901e4e33d81d..b4d65916b3c00 100644
--- a/drivers/hwmon/asus-ec-sensors.c
+++ b/drivers/hwmon/asus-ec-sensors.c
@@ -299,6 +299,7 @@ static const struct ec_board_info board_info_pro_art_x570_creator_wifi = {
.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM |
SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CPU_OPT |
SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE,
+ .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
.family = family_amd_500_series,
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 344/885] hwmon: (ltc2945) Handle error case in ltc2945_value_store
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (342 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 343/885] hwmon: (asus-ec-sensors) add missing mutex path Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 345/885] ALSA: hda: Fix the control element identification for multiple codecs Greg Kroah-Hartman
` (543 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jonathan Cormier, Guenter Roeck,
Sasha Levin
From: Jonathan Cormier <jcormier@criticallink.com>
[ Upstream commit 178b01eccfb0b8149682f61388400bd3d903dddc ]
ltc2945_val_to_reg errors were not being handled
which would have resulted in register being set to
0 (clamped) instead of being left alone.
Fixes: 6700ce035f83 ("hwmon: Driver for Linear Technologies LTC2945")
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/ltc2945.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/hwmon/ltc2945.c b/drivers/hwmon/ltc2945.c
index 9adebb59f6042..c06ab7317431f 100644
--- a/drivers/hwmon/ltc2945.c
+++ b/drivers/hwmon/ltc2945.c
@@ -248,6 +248,8 @@ static ssize_t ltc2945_value_store(struct device *dev,
/* convert to register value, then clamp and write result */
regval = ltc2945_val_to_reg(dev, reg, val);
+ if (regval < 0)
+ return regval;
if (is_power_reg(reg)) {
regval = clamp_val(regval, 0, 0xffffff);
regbuf[0] = regval >> 16;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 345/885] ALSA: hda: Fix the control element identification for multiple codecs
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (343 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 344/885] hwmon: (ltc2945) Handle error case in ltc2945_value_store Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 346/885] drm/amdgpu: fix enum odm_combine_mode mismatch Greg Kroah-Hartman
` (542 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jaroslav Kysela, Takashi Iwai, Sasha Levin
From: Jaroslav Kysela <perex@perex.cz>
[ Upstream commit d045bceff5a904bd79d71dede9f927c00ce4906f ]
Some motherboards have multiple HDA codecs connected to the serial bus.
The current code may create multiple mixer controls with the almost
identical identification.
The current code use id.device field from the control element structure
to store the codec address to avoid such clashes for multiple codecs.
Unfortunately, the user space do not handle this correctly. For mixer
controls, only name and index are used for the identifiers.
This patch fixes this problem to compose the index using the codec
address as an offset in case, when the control already exists. It is
really unlikely that one codec will create 10 similar controls.
This patch adds new kernel module parameter 'ctl_dev_id' to allow
select the old behaviour, too. The CONFIG_SND_HDA_CTL_DEV_ID Kconfig
option sets the default value.
BugLink: https://github.com/alsa-project/alsa-lib/issues/294
BugLink: https://github.com/alsa-project/alsa-lib/issues/205
Fixes: 54d174031576 ("[ALSA] hda-codec - Fix connection list parsing")
Fixes: 1afe206ab699 ("ALSA: hda - Try to find an empty control index when it's occupied")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230202092013.4066998-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/sound/hda_codec.h | 1 +
sound/pci/hda/Kconfig | 14 ++++++++++++++
sound/pci/hda/hda_codec.c | 13 ++++++++++---
sound/pci/hda/hda_controller.c | 1 +
sound/pci/hda/hda_controller.h | 1 +
sound/pci/hda/hda_intel.c | 5 +++++
6 files changed, 32 insertions(+), 3 deletions(-)
diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h
index eba23daf2c290..bbb7805e85d8e 100644
--- a/include/sound/hda_codec.h
+++ b/include/sound/hda_codec.h
@@ -259,6 +259,7 @@ struct hda_codec {
unsigned int relaxed_resume:1; /* don't resume forcibly for jack */
unsigned int forced_resume:1; /* forced resume for jack */
unsigned int no_stream_clean_at_suspend:1; /* do not clean streams at suspend */
+ unsigned int ctl_dev_id:1; /* old control element id build behaviour */
#ifdef CONFIG_PM
unsigned long power_on_acct;
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index a8e8cf98befa1..d29d8372a3c04 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -302,6 +302,20 @@ config SND_HDA_INTEL_HDMI_SILENT_STREAM
This feature can impact power consumption as resources
are kept reserved both at transmitter and receiver.
+config SND_HDA_CTL_DEV_ID
+ bool "Use the device identifier field for controls"
+ depends on SND_HDA_INTEL
+ help
+ Say Y to use the device identifier field for (mixer)
+ controls (old behaviour until this option is available).
+
+ When enabled, the multiple HDA codecs may set the device
+ field in control (mixer) element identifiers. The use
+ of this field is not recommended and defined for mixer controls.
+
+ The old behaviour (Y) is obsolete and will be removed. Consider
+ to not enable this option.
+
endif
endmenu
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 2e728aad67713..9f79c0ac2bda7 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -3389,7 +3389,12 @@ int snd_hda_add_new_ctls(struct hda_codec *codec,
kctl = snd_ctl_new1(knew, codec);
if (!kctl)
return -ENOMEM;
- if (addr > 0)
+ /* Do not use the id.device field for MIXER elements.
+ * This field is for real device numbers (like PCM) but codecs
+ * are hidden components from the user space view (unrelated
+ * to the mixer element identification).
+ */
+ if (addr > 0 && codec->ctl_dev_id)
kctl->id.device = addr;
if (idx > 0)
kctl->id.index = idx;
@@ -3400,9 +3405,11 @@ int snd_hda_add_new_ctls(struct hda_codec *codec,
* the codec addr; if it still fails (or it's the
* primary codec), then try another control index
*/
- if (!addr && codec->core.addr)
+ if (!addr && codec->core.addr) {
addr = codec->core.addr;
- else if (!idx && !knew->index) {
+ if (!codec->ctl_dev_id)
+ idx += 10 * addr;
+ } else if (!idx && !knew->index) {
idx = find_empty_mixer_ctl_idx(codec,
knew->name, 0);
if (idx <= 0)
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index 0ff286b7b66be..083df287c1a48 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -1231,6 +1231,7 @@ int azx_probe_codecs(struct azx *chip, unsigned int max_slots)
continue;
codec->jackpoll_interval = chip->jackpoll_interval;
codec->beep_mode = chip->beep_mode;
+ codec->ctl_dev_id = chip->ctl_dev_id;
codecs++;
}
}
diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h
index f5bf295eb8307..8556031bcd68e 100644
--- a/sound/pci/hda/hda_controller.h
+++ b/sound/pci/hda/hda_controller.h
@@ -124,6 +124,7 @@ struct azx {
/* HD codec */
int codec_probe_mask; /* copied from probe_mask option */
unsigned int beep_mode;
+ bool ctl_dev_id;
#ifdef CONFIG_SND_HDA_PATCH_LOADER
const struct firmware *fw;
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 87002670c0c92..2dbc082076f69 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -119,6 +119,7 @@ static bool beep_mode[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] =
CONFIG_SND_HDA_INPUT_BEEP_MODE};
#endif
static bool dmic_detect = 1;
+static bool ctl_dev_id = IS_ENABLED(CONFIG_SND_HDA_CTL_DEV_ID) ? 1 : 0;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for Intel HD audio interface.");
@@ -157,6 +158,8 @@ module_param(dmic_detect, bool, 0444);
MODULE_PARM_DESC(dmic_detect, "Allow DSP driver selection (bypass this driver) "
"(0=off, 1=on) (default=1); "
"deprecated, use snd-intel-dspcfg.dsp_driver option instead");
+module_param(ctl_dev_id, bool, 0444);
+MODULE_PARM_DESC(ctl_dev_id, "Use control device identifier (based on codec address).");
#ifdef CONFIG_PM
static int param_set_xint(const char *val, const struct kernel_param *kp);
@@ -2278,6 +2281,8 @@ static int azx_probe_continue(struct azx *chip)
chip->beep_mode = beep_mode[dev];
#endif
+ chip->ctl_dev_id = ctl_dev_id;
+
/* create codec instances */
if (bus->codec_mask) {
err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 346/885] drm/amdgpu: fix enum odm_combine_mode mismatch
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (344 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 345/885] ALSA: hda: Fix the control element identification for multiple codecs Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 347/885] scsi: mpt3sas: Fix a memory leak Greg Kroah-Hartman
` (541 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Alex Deucher, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 087bad7eb1f6945f8232f132953ecc2bda8bd38d ]
A conversion from 'bool' to 'enum odm_combine_mode' was incomplete,
and gcc warns about this with many instances of
display/dc/dml/dcn20/display_mode_vba_20.c:3899:44: warning: implicit conversion from 'enum <anonymous>' to 'enum
odm_combine_mode' [-Wenum-conversion]
3899 | locals->ODMCombineEnablePerState[i][k] = false;
Change the ones that we get a warning for, using the same numerical
values to leave the behavior unchanged.
Fixes: 5fc11598166d ("drm/amd/display: expand dml structs")
Link: https://lore.kernel.org/all/20201026210039.3884312-3-arnd@kernel.org/
Link: https://lore.kernel.org/all/20210927100659.1431744-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../amd/display/dc/dml/dcn20/display_mode_vba_20.c | 8 ++++----
.../amd/display/dc/dml/dcn20/display_mode_vba_20v2.c | 10 +++++-----
.../amd/display/dc/dml/dcn21/display_mode_vba_21.c | 12 ++++++------
3 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20.c
index d3b5b6fedf042..6266b0788387e 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20.c
@@ -3897,14 +3897,14 @@ void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
mode_lib->vba.PlaneRequiredDISPCLKWithODMCombine = mode_lib->vba.PixelClock[k] / 2
* (1 + mode_lib->vba.DISPCLKDPPCLKDSCCLKDownSpreading / 100.0);
- locals->ODMCombineEnablePerState[i][k] = false;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_disabled;
mode_lib->vba.PlaneRequiredDISPCLK = mode_lib->vba.PlaneRequiredDISPCLKWithoutODMCombine;
if (mode_lib->vba.ODMCapability) {
if (locals->PlaneRequiredDISPCLKWithoutODMCombine > mode_lib->vba.MaxDispclkRoundedDownToDFSGranularity) {
- locals->ODMCombineEnablePerState[i][k] = true;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1;
mode_lib->vba.PlaneRequiredDISPCLK = mode_lib->vba.PlaneRequiredDISPCLKWithODMCombine;
} else if (locals->HActive[k] > DCN20_MAX_420_IMAGE_WIDTH && locals->OutputFormat[k] == dm_420) {
- locals->ODMCombineEnablePerState[i][k] = true;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1;
mode_lib->vba.PlaneRequiredDISPCLK = mode_lib->vba.PlaneRequiredDISPCLKWithODMCombine;
}
}
@@ -3957,7 +3957,7 @@ void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
locals->RequiredDISPCLK[i][j] = 0.0;
locals->DISPCLK_DPPCLK_Support[i][j] = true;
for (k = 0; k <= mode_lib->vba.NumberOfActivePlanes - 1; k++) {
- locals->ODMCombineEnablePerState[i][k] = false;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_disabled;
if (locals->SwathWidthYSingleDPP[k] <= locals->MaximumSwathWidth[k]) {
locals->NoOfDPP[i][j][k] = 1;
locals->RequiredDPPCLK[i][j][k] = locals->MinDPPCLKUsingSingleDPP[k]
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c
index edd098c7eb927..989d83ee38421 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c
@@ -4008,17 +4008,17 @@ void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode
mode_lib->vba.PlaneRequiredDISPCLKWithODMCombine = mode_lib->vba.PixelClock[k] / 2
* (1 + mode_lib->vba.DISPCLKDPPCLKDSCCLKDownSpreading / 100.0);
- locals->ODMCombineEnablePerState[i][k] = false;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_disabled;
mode_lib->vba.PlaneRequiredDISPCLK = mode_lib->vba.PlaneRequiredDISPCLKWithoutODMCombine;
if (mode_lib->vba.ODMCapability) {
if (locals->PlaneRequiredDISPCLKWithoutODMCombine > MaxMaxDispclkRoundedDown) {
- locals->ODMCombineEnablePerState[i][k] = true;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1;
mode_lib->vba.PlaneRequiredDISPCLK = mode_lib->vba.PlaneRequiredDISPCLKWithODMCombine;
} else if (locals->DSCEnabled[k] && (locals->HActive[k] > DCN20_MAX_DSC_IMAGE_WIDTH)) {
- locals->ODMCombineEnablePerState[i][k] = true;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1;
mode_lib->vba.PlaneRequiredDISPCLK = mode_lib->vba.PlaneRequiredDISPCLKWithODMCombine;
} else if (locals->HActive[k] > DCN20_MAX_420_IMAGE_WIDTH && locals->OutputFormat[k] == dm_420) {
- locals->ODMCombineEnablePerState[i][k] = true;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1;
mode_lib->vba.PlaneRequiredDISPCLK = mode_lib->vba.PlaneRequiredDISPCLKWithODMCombine;
}
}
@@ -4071,7 +4071,7 @@ void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode
locals->RequiredDISPCLK[i][j] = 0.0;
locals->DISPCLK_DPPCLK_Support[i][j] = true;
for (k = 0; k <= mode_lib->vba.NumberOfActivePlanes - 1; k++) {
- locals->ODMCombineEnablePerState[i][k] = false;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_disabled;
if (locals->SwathWidthYSingleDPP[k] <= locals->MaximumSwathWidth[k]) {
locals->NoOfDPP[i][j][k] = 1;
locals->RequiredDPPCLK[i][j][k] = locals->MinDPPCLKUsingSingleDPP[k]
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c
index 1d84ae50311d9..b7c2844d0cbee 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c
@@ -4102,17 +4102,17 @@ void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
mode_lib->vba.PlaneRequiredDISPCLKWithODMCombine = mode_lib->vba.PixelClock[k] / 2
* (1 + mode_lib->vba.DISPCLKDPPCLKDSCCLKDownSpreading / 100.0);
- locals->ODMCombineEnablePerState[i][k] = false;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_disabled;
mode_lib->vba.PlaneRequiredDISPCLK = mode_lib->vba.PlaneRequiredDISPCLKWithoutODMCombine;
if (mode_lib->vba.ODMCapability) {
if (locals->PlaneRequiredDISPCLKWithoutODMCombine > MaxMaxDispclkRoundedDown) {
- locals->ODMCombineEnablePerState[i][k] = true;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1;
mode_lib->vba.PlaneRequiredDISPCLK = mode_lib->vba.PlaneRequiredDISPCLKWithODMCombine;
} else if (locals->DSCEnabled[k] && (locals->HActive[k] > DCN21_MAX_DSC_IMAGE_WIDTH)) {
- locals->ODMCombineEnablePerState[i][k] = true;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1;
mode_lib->vba.PlaneRequiredDISPCLK = mode_lib->vba.PlaneRequiredDISPCLKWithODMCombine;
} else if (locals->HActive[k] > DCN21_MAX_420_IMAGE_WIDTH && locals->OutputFormat[k] == dm_420) {
- locals->ODMCombineEnablePerState[i][k] = true;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1;
mode_lib->vba.PlaneRequiredDISPCLK = mode_lib->vba.PlaneRequiredDISPCLKWithODMCombine;
}
}
@@ -4165,7 +4165,7 @@ void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
locals->RequiredDISPCLK[i][j] = 0.0;
locals->DISPCLK_DPPCLK_Support[i][j] = true;
for (k = 0; k <= mode_lib->vba.NumberOfActivePlanes - 1; k++) {
- locals->ODMCombineEnablePerState[i][k] = false;
+ locals->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_disabled;
if (locals->SwathWidthYSingleDPP[k] <= locals->MaximumSwathWidth[k]) {
locals->NoOfDPP[i][j][k] = 1;
locals->RequiredDPPCLK[i][j][k] = locals->MinDPPCLKUsingSingleDPP[k]
@@ -5230,7 +5230,7 @@ void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
mode_lib->vba.ODMCombineEnabled[k] =
locals->ODMCombineEnablePerState[mode_lib->vba.VoltageLevel][k];
} else {
- mode_lib->vba.ODMCombineEnabled[k] = false;
+ mode_lib->vba.ODMCombineEnabled[k] = dm_odm_combine_mode_disabled;
}
mode_lib->vba.DSCEnabled[k] =
locals->RequiresDSC[mode_lib->vba.VoltageLevel][k];
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 347/885] scsi: mpt3sas: Fix a memory leak
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (345 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 346/885] drm/amdgpu: fix enum odm_combine_mode mismatch Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 348/885] scsi: aic94xx: Add missing check for dma_map_single() Greg Kroah-Hartman
` (540 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tomas Henzl, Martin K. Petersen,
Sasha Levin
From: Tomas Henzl <thenzl@redhat.com>
[ Upstream commit 54dd96015e8d7a2a07359e2dfebf05b529d1780c ]
Add a forgotten kfree().
Fixes: dbec4c9040ed ("scsi: mpt3sas: lockless command submission")
Link: https://lore.kernel.org/r/20230207152159.18627-1-thenzl@redhat.com
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 4e981ccaac416..f4083ff748956 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -5850,6 +5850,9 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
}
dma_pool_destroy(ioc->pcie_sgl_dma_pool);
}
+ kfree(ioc->pcie_sg_lookup);
+ ioc->pcie_sg_lookup = NULL;
+
if (ioc->config_page) {
dexitprintk(ioc,
ioc_info(ioc, "config_page(0x%p): free\n",
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 348/885] scsi: aic94xx: Add missing check for dma_map_single()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (346 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 347/885] scsi: mpt3sas: Fix a memory leak Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 349/885] HID: multitouch: Add quirks for flipped axes Greg Kroah-Hartman
` (539 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Jason Yan,
Martin K. Petersen, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit 32fe45274edb5926abc0fac7263d9f889d02d9cf ]
Add check for dma_map_single() and return error if it fails in order to
avoid invalid DMA address.
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Link: https://lore.kernel.org/r/20230128110832.6792-1-jiasheng@iscas.ac.cn
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/aic94xx/aic94xx_task.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c
index ed119a3f6f2ed..7f02083001100 100644
--- a/drivers/scsi/aic94xx/aic94xx_task.c
+++ b/drivers/scsi/aic94xx/aic94xx_task.c
@@ -50,6 +50,9 @@ static int asd_map_scatterlist(struct sas_task *task,
dma_addr_t dma = dma_map_single(&asd_ha->pcidev->dev, p,
task->total_xfer_len,
task->data_dir);
+ if (dma_mapping_error(&asd_ha->pcidev->dev, dma))
+ return -ENOMEM;
+
sg_arr[0].bus_addr = cpu_to_le64((u64)dma);
sg_arr[0].size = cpu_to_le32(task->total_xfer_len);
sg_arr[0].flags |= ASD_SG_EL_LIST_EOL;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 349/885] HID: multitouch: Add quirks for flipped axes
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (347 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 348/885] scsi: aic94xx: Add missing check for dma_map_single() Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 350/885] HID: retain initial quirks set up when creating HID devices Greg Kroah-Hartman
` (538 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Allen Ballway, Jiri Kosina, Sasha Levin
From: Allen Ballway <ballway@chromium.org>
[ Upstream commit a2f416bf062a38bb76cccd526d2d286b8e4db4d9 ]
Certain touchscreen devices, such as the ELAN9034, are oriented
incorrectly and report touches on opposite points on the X and Y axes.
For example, a 100x200 screen touched at (10,20) would report (90, 180)
and vice versa.
This is fixed by adding device quirks to transform the touch points
into the correct spaces, from X -> MAX(X) - X, and Y -> MAX(Y) - Y.
Signed-off-by: Allen Ballway <ballway@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 03a86105556e ("HID: retain initial quirks set up when creating HID devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-multitouch.c | 39 ++++++++++++++++++---
drivers/hid/hid-quirks.c | 6 ++++
drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 43 ++++++++++++++++++++++++
drivers/hid/i2c-hid/i2c-hid.h | 3 ++
4 files changed, 87 insertions(+), 4 deletions(-)
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 372cbdd223e09..e31be0cb8b850 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -71,6 +71,7 @@ MODULE_LICENSE("GPL");
#define MT_QUIRK_SEPARATE_APP_REPORT BIT(19)
#define MT_QUIRK_FORCE_MULTI_INPUT BIT(20)
#define MT_QUIRK_DISABLE_WAKEUP BIT(21)
+#define MT_QUIRK_ORIENTATION_INVERT BIT(22)
#define MT_INPUTMODE_TOUCHSCREEN 0x02
#define MT_INPUTMODE_TOUCHPAD 0x03
@@ -1009,6 +1010,7 @@ static int mt_process_slot(struct mt_device *td, struct input_dev *input,
struct mt_usages *slot)
{
struct input_mt *mt = input->mt;
+ struct hid_device *hdev = td->hdev;
__s32 quirks = app->quirks;
bool valid = true;
bool confidence_state = true;
@@ -1086,6 +1088,10 @@ static int mt_process_slot(struct mt_device *td, struct input_dev *input,
int orientation = wide;
int max_azimuth;
int azimuth;
+ int x;
+ int y;
+ int cx;
+ int cy;
if (slot->a != DEFAULT_ZERO) {
/*
@@ -1104,6 +1110,9 @@ static int mt_process_slot(struct mt_device *td, struct input_dev *input,
if (azimuth > max_azimuth * 2)
azimuth -= max_azimuth * 4;
orientation = -azimuth;
+ if (quirks & MT_QUIRK_ORIENTATION_INVERT)
+ orientation = -orientation;
+
}
if (quirks & MT_QUIRK_TOUCH_SIZE_SCALING) {
@@ -1115,10 +1124,23 @@ static int mt_process_slot(struct mt_device *td, struct input_dev *input,
minor = minor >> 1;
}
- input_event(input, EV_ABS, ABS_MT_POSITION_X, *slot->x);
- input_event(input, EV_ABS, ABS_MT_POSITION_Y, *slot->y);
- input_event(input, EV_ABS, ABS_MT_TOOL_X, *slot->cx);
- input_event(input, EV_ABS, ABS_MT_TOOL_Y, *slot->cy);
+ x = hdev->quirks & HID_QUIRK_X_INVERT ?
+ input_abs_get_max(input, ABS_MT_POSITION_X) - *slot->x :
+ *slot->x;
+ y = hdev->quirks & HID_QUIRK_Y_INVERT ?
+ input_abs_get_max(input, ABS_MT_POSITION_Y) - *slot->y :
+ *slot->y;
+ cx = hdev->quirks & HID_QUIRK_X_INVERT ?
+ input_abs_get_max(input, ABS_MT_POSITION_X) - *slot->cx :
+ *slot->cx;
+ cy = hdev->quirks & HID_QUIRK_Y_INVERT ?
+ input_abs_get_max(input, ABS_MT_POSITION_Y) - *slot->cy :
+ *slot->cy;
+
+ input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
+ input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
+ input_event(input, EV_ABS, ABS_MT_TOOL_X, cx);
+ input_event(input, EV_ABS, ABS_MT_TOOL_Y, cy);
input_event(input, EV_ABS, ABS_MT_DISTANCE, !*slot->tip_state);
input_event(input, EV_ABS, ABS_MT_ORIENTATION, orientation);
input_event(input, EV_ABS, ABS_MT_PRESSURE, *slot->p);
@@ -1735,6 +1757,15 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (id->vendor == HID_ANY_ID && id->product == HID_ANY_ID)
td->serial_maybe = true;
+
+ /* Orientation is inverted if the X or Y axes are
+ * flipped, but normalized if both are inverted.
+ */
+ if (hdev->quirks & (HID_QUIRK_X_INVERT | HID_QUIRK_Y_INVERT) &&
+ !((hdev->quirks & HID_QUIRK_X_INVERT)
+ && (hdev->quirks & HID_QUIRK_Y_INVERT)))
+ td->mtclass.quirks = MT_QUIRK_ORIENTATION_INVERT;
+
/* This allows the driver to correctly support devices
* that emit events over several HID messages.
*/
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 5bc91f68b3747..30e35f79def47 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -19,6 +19,7 @@
#include <linux/input/elan-i2c-ids.h>
#include "hid-ids.h"
+#include "i2c-hid/i2c-hid.h"
/*
* Alphabetically sorted by vendor then product.
@@ -1298,6 +1299,11 @@ unsigned long hid_lookup_quirk(const struct hid_device *hdev)
quirks = hid_gets_squirk(hdev);
mutex_unlock(&dquirks_lock);
+ /* Get quirks specific to I2C devices */
+ if (IS_ENABLED(CONFIG_I2C_DMI_CORE) && IS_ENABLED(CONFIG_DMI) &&
+ hdev->bus == BUS_I2C)
+ quirks |= i2c_hid_get_dmi_quirks(hdev->vendor, hdev->product);
+
return quirks;
}
EXPORT_SYMBOL_GPL(hid_lookup_quirk);
diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
index 8e0f67455c098..554a7dc285365 100644
--- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
+++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
@@ -10,8 +10,10 @@
#include <linux/types.h>
#include <linux/dmi.h>
#include <linux/mod_devicetable.h>
+#include <linux/hid.h>
#include "i2c-hid.h"
+#include "../hid-ids.h"
struct i2c_hid_desc_override {
@@ -416,6 +418,28 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = {
{ } /* Terminate list */
};
+static const struct hid_device_id i2c_hid_elan_flipped_quirks = {
+ HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8, USB_VENDOR_ID_ELAN, 0x2dcd),
+ HID_QUIRK_X_INVERT | HID_QUIRK_Y_INVERT
+};
+
+/*
+ * This list contains devices which have specific issues based on the system
+ * they're on and not just the device itself. The driver_data will have a
+ * specific hid device to match against.
+ */
+static const struct dmi_system_id i2c_hid_dmi_quirk_table[] = {
+ {
+ .ident = "DynaBook K50/FR",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dynabook Inc."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "dynabook K50/FR"),
+ },
+ .driver_data = (void *)&i2c_hid_elan_flipped_quirks,
+ },
+ { } /* Terminate list */
+};
+
struct i2c_hid_desc *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name)
{
@@ -450,3 +474,22 @@ char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
*size = override->hid_report_desc_size;
return override->hid_report_desc;
}
+
+u32 i2c_hid_get_dmi_quirks(const u16 vendor, const u16 product)
+{
+ u32 quirks = 0;
+ const struct dmi_system_id *system_id =
+ dmi_first_match(i2c_hid_dmi_quirk_table);
+
+ if (system_id) {
+ const struct hid_device_id *device_id =
+ (struct hid_device_id *)(system_id->driver_data);
+
+ if (device_id && device_id->vendor == vendor &&
+ device_id->product == product)
+ quirks = device_id->driver_data;
+ }
+
+ return quirks;
+}
+EXPORT_SYMBOL_GPL(i2c_hid_get_dmi_quirks);
diff --git a/drivers/hid/i2c-hid/i2c-hid.h b/drivers/hid/i2c-hid/i2c-hid.h
index 96c75510ad3f1..2c7b66d5caa0f 100644
--- a/drivers/hid/i2c-hid/i2c-hid.h
+++ b/drivers/hid/i2c-hid/i2c-hid.h
@@ -9,6 +9,7 @@
struct i2c_hid_desc *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name);
char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
unsigned int *size);
+u32 i2c_hid_get_dmi_quirks(const u16 vendor, const u16 product);
#else
static inline struct i2c_hid_desc
*i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name)
@@ -16,6 +17,8 @@ static inline struct i2c_hid_desc
static inline char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
unsigned int *size)
{ return NULL; }
+static inline u32 i2c_hid_get_dmi_quirks(const u16 vendor, const u16 product)
+{ return 0; }
#endif
/**
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 350/885] HID: retain initial quirks set up when creating HID devices
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (348 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 349/885] HID: multitouch: Add quirks for flipped axes Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 351/885] ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared Greg Kroah-Hartman
` (537 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Guenter Roeck, Allen Ballway,
Dmitry Torokhov, Alistair Francis, Benjamin Tissoires,
Sasha Levin
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ Upstream commit 03a86105556e23650e4470c09f91cf7c360d5e28 ]
In certain circumstances, such as when creating I2C-connected HID
devices, we want to pass and retain some quirks (axis inversion, etc).
The source of such quirks may be device tree, or DMI data, or something
else not readily available to the HID core itself and therefore cannot
be reconstructed easily. To allow this, introduce "initial_quirks" field
in hid_device structure and use it when determining the final set of
quirks.
This fixes the problem with i2c-hid setting up device-tree sourced
quirks too late and losing them on device rebind, and also allows to
sever the tie between hid-code and i2c-hid when applying DMI-based
quirks.
Fixes: b60d3c803d76 ("HID: i2c-hid-of: Expose the touchscreen-inverted properties")
Fixes: a2f416bf062a ("HID: multitouch: Add quirks for flipped axes")
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Allen Ballway <ballway@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/Y+LYwu3Zs13hdVDy@google.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-quirks.c | 8 +-------
drivers/hid/i2c-hid/i2c-hid-core.c | 6 ++++--
drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 1 -
include/linux/hid.h | 1 +
4 files changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 30e35f79def47..66e64350f1386 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -19,7 +19,6 @@
#include <linux/input/elan-i2c-ids.h>
#include "hid-ids.h"
-#include "i2c-hid/i2c-hid.h"
/*
* Alphabetically sorted by vendor then product.
@@ -1238,7 +1237,7 @@ EXPORT_SYMBOL_GPL(hid_quirks_exit);
static unsigned long hid_gets_squirk(const struct hid_device *hdev)
{
const struct hid_device_id *bl_entry;
- unsigned long quirks = 0;
+ unsigned long quirks = hdev->initial_quirks;
if (hid_match_id(hdev, hid_ignore_list))
quirks |= HID_QUIRK_IGNORE;
@@ -1299,11 +1298,6 @@ unsigned long hid_lookup_quirk(const struct hid_device *hdev)
quirks = hid_gets_squirk(hdev);
mutex_unlock(&dquirks_lock);
- /* Get quirks specific to I2C devices */
- if (IS_ENABLED(CONFIG_I2C_DMI_CORE) && IS_ENABLED(CONFIG_DMI) &&
- hdev->bus == BUS_I2C)
- quirks |= i2c_hid_get_dmi_quirks(hdev->vendor, hdev->product);
-
return quirks;
}
EXPORT_SYMBOL_GPL(hid_lookup_quirk);
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index a9428b7f34a46..969f8eb086f02 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -1035,6 +1035,10 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
hid->vendor = le16_to_cpu(ihid->hdesc.wVendorID);
hid->product = le16_to_cpu(ihid->hdesc.wProductID);
+ hid->initial_quirks = quirks;
+ hid->initial_quirks |= i2c_hid_get_dmi_quirks(hid->vendor,
+ hid->product);
+
snprintf(hid->name, sizeof(hid->name), "%s %04X:%04X",
client->name, (u16)hid->vendor, (u16)hid->product);
strscpy(hid->phys, dev_name(&client->dev), sizeof(hid->phys));
@@ -1048,8 +1052,6 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
goto err_mem_free;
}
- hid->quirks |= quirks;
-
return 0;
err_mem_free:
diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
index 554a7dc285365..210f17c3a0be0 100644
--- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
+++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
@@ -492,4 +492,3 @@ u32 i2c_hid_get_dmi_quirks(const u16 vendor, const u16 product)
return quirks;
}
-EXPORT_SYMBOL_GPL(i2c_hid_get_dmi_quirks);
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 8677ae38599e4..48563dc09e171 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -619,6 +619,7 @@ struct hid_device { /* device report descriptor */
unsigned long status; /* see STAT flags above */
unsigned claimed; /* Claimed by hidinput, hiddev? */
unsigned quirks; /* Various quirks the device can pull on us */
+ unsigned initial_quirks; /* Initial set of quirks supplied when creating device */
bool io_started; /* If IO has started */
struct list_head inputs; /* The list of inputs */
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 351/885] ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (349 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 350/885] HID: retain initial quirks set up when creating HID devices Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 352/885] ASoC: qcom: q6apm-dai: fix race condition while updating the position pointer Greg Kroah-Hartman
` (536 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Srinivas Kandagatla, Mark Brown,
Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit c2ac3aec474da0455df79c4a182f19687bc98d1d ]
prepare callback can be called multiple times, so unprepare the stream
if its already prepared.
Without this DSP is not happy to setting the params on a already
prepared graph.
Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
index ce9e5646d8f3a..23d23bc6fbaa7 100644
--- a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
+++ b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
@@ -127,6 +127,11 @@ static int q6apm_lpass_dai_prepare(struct snd_pcm_substream *substream, struct s
int graph_id = dai->id;
int rc;
+ if (dai_data->is_port_started[dai->id]) {
+ q6apm_graph_stop(dai_data->graph[dai->id]);
+ dai_data->is_port_started[dai->id] = false;
+ }
+
/**
* It is recommend to load DSP with source graph first and then sink
* graph, so sequence for playback and capture will be different
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 352/885] ASoC: qcom: q6apm-dai: fix race condition while updating the position pointer
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (350 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 351/885] ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 353/885] ASoC: qcom: q6apm-dai: Add SNDRV_PCM_INFO_BATCH flag Greg Kroah-Hartman
` (535 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Srinivas Kandagatla, Mark Brown,
Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit 84222ef54bfd8f043c23c8603fd5257a64b00780 ]
It is noticed that the position pointer value seems to get a get corrupted
due to missing locking between updating and reading.
Fix this by adding a spinlock around the position pointer.
Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/qcom/qdsp6/q6apm-dai.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/sound/soc/qcom/qdsp6/q6apm-dai.c b/sound/soc/qcom/qdsp6/q6apm-dai.c
index ee59ef36b85a6..bd35067a40521 100644
--- a/sound/soc/qcom/qdsp6/q6apm-dai.c
+++ b/sound/soc/qcom/qdsp6/q6apm-dai.c
@@ -8,6 +8,7 @@
#include <linux/slab.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
+#include <linux/spinlock.h>
#include <sound/pcm.h>
#include <asm/dma.h>
#include <linux/dma-mapping.h>
@@ -53,6 +54,7 @@ struct q6apm_dai_rtd {
uint16_t session_id;
enum stream_state state;
struct q6apm_graph *graph;
+ spinlock_t lock;
};
struct q6apm_dai_data {
@@ -99,20 +101,25 @@ static void event_handler(uint32_t opcode, uint32_t token, uint32_t *payload, vo
{
struct q6apm_dai_rtd *prtd = priv;
struct snd_pcm_substream *substream = prtd->substream;
+ unsigned long flags;
switch (opcode) {
case APM_CLIENT_EVENT_CMD_EOS_DONE:
prtd->state = Q6APM_STREAM_STOPPED;
break;
case APM_CLIENT_EVENT_DATA_WRITE_DONE:
+ spin_lock_irqsave(&prtd->lock, flags);
prtd->pos += prtd->pcm_count;
+ spin_unlock_irqrestore(&prtd->lock, flags);
snd_pcm_period_elapsed(substream);
if (prtd->state == Q6APM_STREAM_RUNNING)
q6apm_write_async(prtd->graph, prtd->pcm_count, 0, 0, 0);
break;
case APM_CLIENT_EVENT_DATA_READ_DONE:
+ spin_lock_irqsave(&prtd->lock, flags);
prtd->pos += prtd->pcm_count;
+ spin_unlock_irqrestore(&prtd->lock, flags);
snd_pcm_period_elapsed(substream);
if (prtd->state == Q6APM_STREAM_RUNNING)
q6apm_read(prtd->graph);
@@ -253,6 +260,7 @@ static int q6apm_dai_open(struct snd_soc_component *component,
if (prtd == NULL)
return -ENOMEM;
+ spin_lock_init(&prtd->lock);
prtd->substream = substream;
prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler, prtd, graph_id);
if (IS_ERR(prtd->graph)) {
@@ -332,11 +340,17 @@ static snd_pcm_uframes_t q6apm_dai_pointer(struct snd_soc_component *component,
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct q6apm_dai_rtd *prtd = runtime->private_data;
+ snd_pcm_uframes_t ptr;
+ unsigned long flags;
+ spin_lock_irqsave(&prtd->lock, flags);
if (prtd->pos == prtd->pcm_size)
prtd->pos = 0;
- return bytes_to_frames(runtime, prtd->pos);
+ ptr = bytes_to_frames(runtime, prtd->pos);
+ spin_unlock_irqrestore(&prtd->lock, flags);
+
+ return ptr;
}
static int q6apm_dai_hw_params(struct snd_soc_component *component,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 353/885] ASoC: qcom: q6apm-dai: Add SNDRV_PCM_INFO_BATCH flag
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (351 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 352/885] ASoC: qcom: q6apm-dai: fix race condition while updating the position pointer Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 354/885] ASoC: codecs: lpass: register mclk after runtime pm Greg Kroah-Hartman
` (534 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Srinivas Kandagatla, Mark Brown,
Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit aa759f3f9f4394a3af65ad1772fca6cb9dd9e4cc ]
At the moment, playing audio with PulseAudio with the qdsp6 driver
results in distorted sound. It seems like its timer-based scheduling
does not work properly with qdsp6 since setting tsched=0 in
the PulseAudio configuration avoids the issue.
Apparently this happens when the pointer() callback is not accurate
enough. There is a SNDRV_PCM_INFO_BATCH flag that can be used to stop
PulseAudio from using timer-based scheduling by default.
According to https://www.alsa-project.org/pipermail/alsa-devel/2014-March/073816.html:
The flag is being used in the sense explained in the previous audio
meeting -- the data transfer granularity isn't fine enough but aligned
to the period size (or less).
q6apm-dai reports the position as multiple of
prtd->pcm_count = snd_pcm_lib_period_bytes(substream)
so it indeed just a multiple of the period size.
Therefore adding the flag here seems appropriate and makes audio
work out of the box.
Comment log inspired by Stephan Gerhold sent for q6asm-dai.c few years back.
Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/qcom/qdsp6/q6apm-dai.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6apm-dai.c b/sound/soc/qcom/qdsp6/q6apm-dai.c
index bd35067a40521..7f02f5b2c33fd 100644
--- a/sound/soc/qcom/qdsp6/q6apm-dai.c
+++ b/sound/soc/qcom/qdsp6/q6apm-dai.c
@@ -64,7 +64,8 @@ struct q6apm_dai_data {
static struct snd_pcm_hardware q6apm_dai_hardware_capture = {
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
+ SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_BATCH),
.formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE),
.rates = SNDRV_PCM_RATE_8000_48000,
.rate_min = 8000,
@@ -82,7 +83,8 @@ static struct snd_pcm_hardware q6apm_dai_hardware_capture = {
static struct snd_pcm_hardware q6apm_dai_hardware_playback = {
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
+ SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_BATCH),
.formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE),
.rates = SNDRV_PCM_RATE_8000_192000,
.rate_min = 8000,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 354/885] ASoC: codecs: lpass: register mclk after runtime pm
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (352 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 353/885] ASoC: qcom: q6apm-dai: Add SNDRV_PCM_INFO_BATCH flag Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 355/885] ASoC: codecs: lpass: fix incorrect mclk rate Greg Kroah-Hartman
` (533 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Srinivas Kandagatla, Mark Brown,
Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit 1dc3459009c33e335f0d62b84dd39a6bbd7fd5d2 ]
move mclk out registration after runtime pm is enabled so that the
clk framework can resume the codec if it requires to enable the mclk out.
Fixes: c96baa2949b2 ("ASoC: codecs: wsa-macro: add runtime pm support")
Fixes: 72ad25eabda0 ("ASoC: codecs: va-macro: add runtime pm support")
Fixes: 366ff79ed539 ("ASoC: codecs: rx-macro: add runtime pm support")
Fixes: 1fb83bc5cf64 ("ASoC: codecs: tx-macro: add runtime pm support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/lpass-rx-macro.c | 8 ++++----
sound/soc/codecs/lpass-tx-macro.c | 8 ++++----
sound/soc/codecs/lpass-va-macro.c | 20 ++++++++++----------
sound/soc/codecs/lpass-wsa-macro.c | 9 ++++-----
4 files changed, 22 insertions(+), 23 deletions(-)
diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c
index a9ef9d5ffcc5c..dd6970d5eb8d1 100644
--- a/sound/soc/codecs/lpass-rx-macro.c
+++ b/sound/soc/codecs/lpass-rx-macro.c
@@ -3601,10 +3601,6 @@ static int rx_macro_probe(struct platform_device *pdev)
if (ret)
goto err_fsgen;
- ret = rx_macro_register_mclk_output(rx);
- if (ret)
- goto err_clkout;
-
ret = devm_snd_soc_register_component(dev, &rx_macro_component_drv,
rx_macro_dai,
ARRAY_SIZE(rx_macro_dai));
@@ -3618,6 +3614,10 @@ static int rx_macro_probe(struct platform_device *pdev)
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
+ ret = rx_macro_register_mclk_output(rx);
+ if (ret)
+ goto err_clkout;
+
return 0;
err_clkout:
diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c
index ee15cf6b98bba..bc0a0c32ea5bf 100644
--- a/sound/soc/codecs/lpass-tx-macro.c
+++ b/sound/soc/codecs/lpass-tx-macro.c
@@ -1889,10 +1889,6 @@ static int tx_macro_probe(struct platform_device *pdev)
if (ret)
goto err_fsgen;
- ret = tx_macro_register_mclk_output(tx);
- if (ret)
- goto err_clkout;
-
ret = devm_snd_soc_register_component(dev, &tx_macro_component_drv,
tx_macro_dai,
ARRAY_SIZE(tx_macro_dai));
@@ -1905,6 +1901,10 @@ static int tx_macro_probe(struct platform_device *pdev)
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
+ ret = tx_macro_register_mclk_output(tx);
+ if (ret)
+ goto err_clkout;
+
return 0;
err_clkout:
diff --git a/sound/soc/codecs/lpass-va-macro.c b/sound/soc/codecs/lpass-va-macro.c
index b0b6cf29cba30..1623ba78ddb3d 100644
--- a/sound/soc/codecs/lpass-va-macro.c
+++ b/sound/soc/codecs/lpass-va-macro.c
@@ -1524,16 +1524,6 @@ static int va_macro_probe(struct platform_device *pdev)
if (ret)
goto err_mclk;
- ret = va_macro_register_fsgen_output(va);
- if (ret)
- goto err_clkout;
-
- va->fsgen = clk_hw_get_clk(&va->hw, "fsgen");
- if (IS_ERR(va->fsgen)) {
- ret = PTR_ERR(va->fsgen);
- goto err_clkout;
- }
-
if (va->has_swr_master) {
/* Set default CLK div to 1 */
regmap_update_bits(va->regmap, CDC_VA_TOP_CSR_SWR_MIC_CTL0,
@@ -1560,6 +1550,16 @@ static int va_macro_probe(struct platform_device *pdev)
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
+ ret = va_macro_register_fsgen_output(va);
+ if (ret)
+ goto err_clkout;
+
+ va->fsgen = clk_hw_get_clk(&va->hw, "fsgen");
+ if (IS_ERR(va->fsgen)) {
+ ret = PTR_ERR(va->fsgen);
+ goto err_clkout;
+ }
+
return 0;
err_clkout:
diff --git a/sound/soc/codecs/lpass-wsa-macro.c b/sound/soc/codecs/lpass-wsa-macro.c
index 5e0abefe7cced..c012033fb69ed 100644
--- a/sound/soc/codecs/lpass-wsa-macro.c
+++ b/sound/soc/codecs/lpass-wsa-macro.c
@@ -2449,11 +2449,6 @@ static int wsa_macro_probe(struct platform_device *pdev)
if (ret)
goto err_fsgen;
- ret = wsa_macro_register_mclk_output(wsa);
- if (ret)
- goto err_clkout;
-
-
ret = devm_snd_soc_register_component(dev, &wsa_macro_component_drv,
wsa_macro_dai,
ARRAY_SIZE(wsa_macro_dai));
@@ -2466,6 +2461,10 @@ static int wsa_macro_probe(struct platform_device *pdev)
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
+ ret = wsa_macro_register_mclk_output(wsa);
+ if (ret)
+ goto err_clkout;
+
return 0;
err_clkout:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 355/885] ASoC: codecs: lpass: fix incorrect mclk rate
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (353 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 354/885] ASoC: codecs: lpass: register mclk after runtime pm Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 356/885] spi: bcm63xx-hsspi: Endianness fix for ARM based SoC Greg Kroah-Hartman
` (532 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Srinivas Kandagatla, Mark Brown,
Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit e7621434378c40b62ef858c14ae6415fb6469a8e ]
For some reason we ended up with incorrect mclk rate which should be
1920000 instead of 96000, So far we were getting lucky as the same clk
is set to 192000 by wsa and va macro. This issue is discovered when there
is no wsa macro active and only rx or tx path is tested.
Fix this by setting correct rate.
Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/lpass-rx-macro.c | 4 ++--
sound/soc/codecs/lpass-tx-macro.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c
index dd6970d5eb8d1..8621cfabcf5b6 100644
--- a/sound/soc/codecs/lpass-rx-macro.c
+++ b/sound/soc/codecs/lpass-rx-macro.c
@@ -366,7 +366,7 @@
#define CDC_RX_DSD1_CFG2 (0x0F8C)
#define RX_MAX_OFFSET (0x0F8C)
-#define MCLK_FREQ 9600000
+#define MCLK_FREQ 19200000
#define RX_MACRO_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\
SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000 |\
@@ -3579,7 +3579,7 @@ static int rx_macro_probe(struct platform_device *pdev)
/* set MCLK and NPL rates */
clk_set_rate(rx->mclk, MCLK_FREQ);
- clk_set_rate(rx->npl, 2 * MCLK_FREQ);
+ clk_set_rate(rx->npl, MCLK_FREQ);
ret = clk_prepare_enable(rx->macro);
if (ret)
diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c
index bc0a0c32ea5bf..5d1c58df081ac 100644
--- a/sound/soc/codecs/lpass-tx-macro.c
+++ b/sound/soc/codecs/lpass-tx-macro.c
@@ -202,7 +202,7 @@
#define TX_MACRO_AMIC_UNMUTE_DELAY_MS 100
#define TX_MACRO_DMIC_HPF_DELAY_MS 300
#define TX_MACRO_AMIC_HPF_DELAY_MS 300
-#define MCLK_FREQ 9600000
+#define MCLK_FREQ 19200000
enum {
TX_MACRO_AIF_INVALID = 0,
@@ -1867,7 +1867,7 @@ static int tx_macro_probe(struct platform_device *pdev)
/* set MCLK and NPL rates */
clk_set_rate(tx->mclk, MCLK_FREQ);
- clk_set_rate(tx->npl, 2 * MCLK_FREQ);
+ clk_set_rate(tx->npl, MCLK_FREQ);
ret = clk_prepare_enable(tx->macro);
if (ret)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 356/885] spi: bcm63xx-hsspi: Endianness fix for ARM based SoC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (354 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 355/885] ASoC: codecs: lpass: fix incorrect mclk rate Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 357/885] drm/amd/display: dont call dc_interrupt_set() for disabled crtcs Greg Kroah-Hartman
` (531 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kursad Oney, William Zhang,
Florian Fainelli, Mark Brown, Sasha Levin
From: William Zhang <william.zhang@broadcom.com>
[ Upstream commit 85a84a61699990db6a025b5073f337f49933a875 ]
HSSPI controller uses big endian for the opcode in the message to the
controller ping pong buffer. Use cpu_to_be16 to properly handle the
endianness for both big and little endian host.
Fixes: 142168eba9dc ("spi: bcm63xx-hsspi: add bcm63xx HSSPI driver")
Signed-off-by: Kursad Oney <kursad.oney@broadcom.com>
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230207065826.285013-7-william.zhang@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-bcm63xx-hsspi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index b871fd810d801..a74345ed0e2ff 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -194,7 +194,7 @@ static int bcm63xx_hsspi_do_txrx(struct spi_device *spi, struct spi_transfer *t)
tx += curr_step;
}
- __raw_writew(opcode | curr_step, bs->fifo);
+ __raw_writew((u16)cpu_to_be16(opcode | curr_step), bs->fifo);
/* enable interrupt */
__raw_writel(HSSPI_PINGx_CMD_DONE(0),
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 357/885] drm/amd/display: dont call dc_interrupt_set() for disabled crtcs
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (355 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 356/885] spi: bcm63xx-hsspi: Endianness fix for ARM based SoC Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 358/885] HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support Greg Kroah-Hartman
` (530 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Harry Wentland, Hamza Mahfooz,
Alex Deucher, Sasha Levin
From: Hamza Mahfooz <hamza.mahfooz@amd.com>
[ Upstream commit 4936458bf989d168f5a89015dd81067c4c2bdc64 ]
As made mention of in commit 4ea7fc09539b ("drm/amd/display: Do not
program interrupt status on disabled crtc"), we shouldn't program
disabled crtcs. So, filter out disabled crtcs in dm_set_vupdate_irq()
and dm_set_vblank().
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 589d2739332d ("drm/amd/display: Use crtc enable/disable_vblank hooks")
Fixes: d2574c33bb71 ("drm/amd/display: In VRR mode, do DRM core vblank handling at end of vblank. (v2)")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c
index 64dd029702926..b87f50e8fa615 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c
@@ -77,6 +77,9 @@ int dm_set_vupdate_irq(struct drm_crtc *crtc, bool enable)
struct amdgpu_device *adev = drm_to_adev(crtc->dev);
int rc;
+ if (acrtc->otg_inst == -1)
+ return 0;
+
irq_source = IRQ_TYPE_VUPDATE + acrtc->otg_inst;
rc = dc_interrupt_set(adev->dm.dc, irq_source, enable) ? 0 : -EBUSY;
@@ -149,6 +152,9 @@ static inline int dm_set_vblank(struct drm_crtc *crtc, bool enable)
struct vblank_control_work *work;
int rc = 0;
+ if (acrtc->otg_inst == -1)
+ goto skip;
+
if (enable) {
/* vblank irq on -> Only need vupdate irq in vrr mode */
if (amdgpu_dm_vrr_active(acrtc_state))
@@ -166,6 +172,7 @@ static inline int dm_set_vblank(struct drm_crtc *crtc, bool enable)
if (!dc_interrupt_set(adev->dm.dc, irq_source, enable))
return -EBUSY;
+skip:
if (amdgpu_in_reset(adev))
return 0;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 358/885] HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (356 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 357/885] drm/amd/display: dont call dc_interrupt_set() for disabled crtcs Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 359/885] spi: bcm63xx-hsspi: Fix multi-bit mode setting Greg Kroah-Hartman
` (529 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bastien Nocera, Benjamin Tissoires,
Sasha Levin
From: Bastien Nocera <hadess@hadess.net>
[ Upstream commit 719acb4d3b7accc9cfbaf21c1c2d51dc7384aee2 ]
HID++ 1.0 devices only export whether Fast Scrolling is enabled, not
whether they are capable of it. Reinstate the original quirks for the 3
supported mice so fast scrolling works again on those devices.
Fixes: 908d325e1665 ("HID: logitech-hidpp: Detect hi-res scrolling support")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216903
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230116130937.391441-1-hadess@hadess.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-logitech-hidpp.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 07b8506eecc41..19fce82d03f02 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -77,6 +77,7 @@ MODULE_PARM_DESC(disable_tap_to_click,
#define HIDPP_QUIRK_HIDPP_WHEELS BIT(26)
#define HIDPP_QUIRK_HIDPP_EXTRA_MOUSE_BTNS BIT(27)
#define HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS BIT(28)
+#define HIDPP_QUIRK_HI_RES_SCROLL_1P0 BIT(29)
/* These are just aliases for now */
#define HIDPP_QUIRK_KBD_SCROLL_WHEEL HIDPP_QUIRK_HIDPP_WHEELS
@@ -3472,14 +3473,8 @@ static int hidpp_initialize_hires_scroll(struct hidpp_device *hidpp)
hid_dbg(hidpp->hid_dev, "Detected HID++ 2.0 hi-res scrolling\n");
}
} else {
- struct hidpp_report response;
-
- ret = hidpp_send_rap_command_sync(hidpp,
- REPORT_ID_HIDPP_SHORT,
- HIDPP_GET_REGISTER,
- HIDPP_ENABLE_FAST_SCROLL,
- NULL, 0, &response);
- if (!ret) {
+ /* We cannot detect fast scrolling support on HID++ 1.0 devices */
+ if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) {
hidpp->capabilities |= HIDPP_CAPABILITY_HIDPP10_FAST_SCROLL;
hid_dbg(hidpp->hid_dev, "Detected HID++ 1.0 fast scroll\n");
}
@@ -4297,9 +4292,15 @@ static const struct hid_device_id hidpp_devices[] = {
HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH,
USB_DEVICE_ID_LOGITECH_T651),
.driver_data = HIDPP_QUIRK_CLASS_WTP },
+ { /* Mouse Logitech Anywhere MX */
+ LDJ_DEVICE(0x1017), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 },
{ /* Mouse logitech M560 */
LDJ_DEVICE(0x402d),
.driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_CLASS_M560 },
+ { /* Mouse Logitech M705 (firmware RQM17) */
+ LDJ_DEVICE(0x101b), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 },
+ { /* Mouse Logitech Performance MX */
+ LDJ_DEVICE(0x101a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 },
{ /* Keyboard logitech K400 */
LDJ_DEVICE(0x4024),
.driver_data = HIDPP_QUIRK_CLASS_K400 },
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 359/885] spi: bcm63xx-hsspi: Fix multi-bit mode setting
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (357 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 358/885] HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 360/885] hwmon: (mlxreg-fan) Return zero speed for broken fan Greg Kroah-Hartman
` (528 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, William Zhang, Mark Brown, Sasha Levin
From: William Zhang <william.zhang@broadcom.com>
[ Upstream commit 811ff802aaf878ebbbaeac0307a0164fa21e7d40 ]
Currently the driver always sets the controller to dual data bit mode
for both tx and rx data in the profile mode control register even for
single data bit transfer. Luckily the opcode is set correctly according
to SPI transfer data bit width so it does not actually cause issues.
This change fixes the problem by setting tx and rx data bit mode field
correctly according to the actual SPI transfer tx and rx data bit width.
Fixes: 142168eba9dc ("spi: bcm63xx-hsspi: add bcm63xx HSSPI driver")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230209200246.141520-11-william.zhang@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-bcm63xx-hsspi.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index a74345ed0e2ff..9ec33745c1472 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -163,6 +163,7 @@ static int bcm63xx_hsspi_do_txrx(struct spi_device *spi, struct spi_transfer *t)
int step_size = HSSPI_BUFFER_LEN;
const u8 *tx = t->tx_buf;
u8 *rx = t->rx_buf;
+ u32 val = 0;
bcm63xx_hsspi_set_clk(bs, spi, t->speed_hz);
bcm63xx_hsspi_set_cs(bs, spi->chip_select, true);
@@ -178,11 +179,16 @@ static int bcm63xx_hsspi_do_txrx(struct spi_device *spi, struct spi_transfer *t)
step_size -= HSSPI_OPCODE_LEN;
if ((opcode == HSSPI_OP_READ && t->rx_nbits == SPI_NBITS_DUAL) ||
- (opcode == HSSPI_OP_WRITE && t->tx_nbits == SPI_NBITS_DUAL))
+ (opcode == HSSPI_OP_WRITE && t->tx_nbits == SPI_NBITS_DUAL)) {
opcode |= HSSPI_OP_MULTIBIT;
- __raw_writel(1 << MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT |
- 1 << MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT | 0xff,
+ if (t->rx_nbits == SPI_NBITS_DUAL)
+ val |= 1 << MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT;
+ if (t->tx_nbits == SPI_NBITS_DUAL)
+ val |= 1 << MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT;
+ }
+
+ __raw_writel(val | 0xff,
bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
while (pending > 0) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 360/885] hwmon: (mlxreg-fan) Return zero speed for broken fan
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (358 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 359/885] spi: bcm63xx-hsspi: Fix multi-bit mode setting Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 361/885] ASoC: tlv320adcx140: fix ti,gpio-config DT property init Greg Kroah-Hartman
` (527 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vadim Pasternak, Guenter Roeck, Sasha Levin
From: Vadim Pasternak <vadimp@nvidia.com>
[ Upstream commit a1ffd3c46267ee5c807acd780e15df9bb692223f ]
Currently for broken fan driver returns value calculated based on error
code (0xFF) in related fan speed register.
Thus, for such fan user gets fan{n}_fault to 1 and fan{n}_input with
misleading value.
Add check for fan fault prior return speed value and return zero if
fault is detected.
Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20230212145730.24247-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/mlxreg-fan.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c
index b48bd7c961d66..96017cc8da7ec 100644
--- a/drivers/hwmon/mlxreg-fan.c
+++ b/drivers/hwmon/mlxreg-fan.c
@@ -155,6 +155,12 @@ mlxreg_fan_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
if (err)
return err;
+ if (MLXREG_FAN_GET_FAULT(regval, tacho->mask)) {
+ /* FAN is broken - return zero for FAN speed. */
+ *val = 0;
+ return 0;
+ }
+
*val = MLXREG_FAN_GET_RPM(regval, fan->divider,
fan->samples);
break;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 361/885] ASoC: tlv320adcx140: fix ti,gpio-config DT property init
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (359 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 360/885] hwmon: (mlxreg-fan) Return zero speed for broken fan Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 362/885] dm: remove flush_scheduled_work() during local_exit() Greg Kroah-Hartman
` (526 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Steffen Aschbacher,
Alexandru Ardelean, Mark Brown, Sasha Levin
From: Steffen Aschbacher <steffen.aschbacher@stihl.de>
[ Upstream commit 771725efe5e2e5396dd9d1220437e5f9d6b9ca9d ]
When the 'ti,gpio-config' property is not defined, the
device_property_count_u32() will return an error, rather than zero.
The current check, only handles a return value of zero, which assumes that
the property is defined and has nothing defined.
This change extends the check to also check for an error case (most likely
to be hit by the case that the 'ti,gpio-config' is not defined).
In case that the 'ti,gpio-config' and the returned 'gpio_count' is not
correct, there is a 'if (gpio_count != ADCX140_NUM_GPIO_CFGS)' check, a few
lines lower that will return -EINVAL.
This means that someone tried to define 'ti,gpio-config', but with the
wrong number of GPIOs.
Fixes: d5214321498a ("ASoC: tlv320adcx140: Add support for configuring GPIO pin")
Signed-off-by: Steffen Aschbacher <steffen.aschbacher@stihl.de>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230213073805.14640-1-alex@shruggie.ro
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/tlv320adcx140.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
index 91a22d9279158..530f321d08e9c 100644
--- a/sound/soc/codecs/tlv320adcx140.c
+++ b/sound/soc/codecs/tlv320adcx140.c
@@ -925,7 +925,7 @@ static int adcx140_configure_gpio(struct adcx140_priv *adcx140)
gpio_count = device_property_count_u32(adcx140->dev,
"ti,gpio-config");
- if (gpio_count == 0)
+ if (gpio_count <= 0)
return 0;
if (gpio_count != ADCX140_NUM_GPIO_CFGS)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 362/885] dm: remove flush_scheduled_work() during local_exit()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (360 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 361/885] ASoC: tlv320adcx140: fix ti,gpio-config DT property init Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 363/885] nfs4trace: fix state manager flag printing Greg Kroah-Hartman
` (525 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Mike Snitzer, Sasha Levin
From: Mike Snitzer <snitzer@kernel.org>
[ Upstream commit 0b22ff5360f5c4e11050b89206370fdf7dc0a226 ]
Commit acfe0ad74d2e1 ("dm: allocate a special workqueue for deferred
device removal") switched from using system workqueue to a single
workqueue local to DM. But it didn't eliminate the call to
flush_scheduled_work() that was introduced purely for the benefit of
deferred device removal with commit 2c140a246dc ("dm: allow remove to
be deferred").
Since DM core uses its own workqueue (and queue_work) there is no need
to call flush_scheduled_work() from local_exit(). local_exit()'s
destroy_workqueue(deferred_remove_workqueue) handles flushing work
started with queue_work().
Fixes: acfe0ad74d2e1 ("dm: allocate a special workqueue for deferred device removal")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/dm.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index d49809e9db96e..2ce16e6c1e357 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -231,7 +231,6 @@ static int __init local_init(void)
static void local_exit(void)
{
- flush_scheduled_work();
destroy_workqueue(deferred_remove_workqueue);
unregister_blkdev(_major, _name);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 363/885] nfs4trace: fix state manager flag printing
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (361 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 362/885] dm: remove flush_scheduled_work() during local_exit() Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 364/885] NFS: fix disabling of swap Greg Kroah-Hartman
` (524 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Benjamin Coddington, Anna Schumaker,
Sasha Levin
From: Benjamin Coddington <bcodding@redhat.com>
[ Upstream commit b46d80bd2d6e7e063c625a20de54248afe8d4889 ]
__print_flags wants a mask, not the enum value. Add two more flags.
Fixes: 511ba52e4c01 ("NFS4: Trace state recovery operation")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/nfs4trace.h | 42 ++++++++++++++++++++++--------------------
1 file changed, 22 insertions(+), 20 deletions(-)
diff --git a/fs/nfs/nfs4trace.h b/fs/nfs/nfs4trace.h
index 2cff5901c6894..3fa77ad7258f2 100644
--- a/fs/nfs/nfs4trace.h
+++ b/fs/nfs/nfs4trace.h
@@ -292,32 +292,34 @@ TRACE_DEFINE_ENUM(NFS4CLNT_MOVED);
TRACE_DEFINE_ENUM(NFS4CLNT_LEASE_MOVED);
TRACE_DEFINE_ENUM(NFS4CLNT_DELEGATION_EXPIRED);
TRACE_DEFINE_ENUM(NFS4CLNT_RUN_MANAGER);
+TRACE_DEFINE_ENUM(NFS4CLNT_MANAGER_AVAILABLE);
TRACE_DEFINE_ENUM(NFS4CLNT_RECALL_RUNNING);
TRACE_DEFINE_ENUM(NFS4CLNT_RECALL_ANY_LAYOUT_READ);
TRACE_DEFINE_ENUM(NFS4CLNT_RECALL_ANY_LAYOUT_RW);
+TRACE_DEFINE_ENUM(NFS4CLNT_DELEGRETURN_DELAYED);
#define show_nfs4_clp_state(state) \
__print_flags(state, "|", \
- { NFS4CLNT_MANAGER_RUNNING, "MANAGER_RUNNING" }, \
- { NFS4CLNT_CHECK_LEASE, "CHECK_LEASE" }, \
- { NFS4CLNT_LEASE_EXPIRED, "LEASE_EXPIRED" }, \
- { NFS4CLNT_RECLAIM_REBOOT, "RECLAIM_REBOOT" }, \
- { NFS4CLNT_RECLAIM_NOGRACE, "RECLAIM_NOGRACE" }, \
- { NFS4CLNT_DELEGRETURN, "DELEGRETURN" }, \
- { NFS4CLNT_SESSION_RESET, "SESSION_RESET" }, \
- { NFS4CLNT_LEASE_CONFIRM, "LEASE_CONFIRM" }, \
- { NFS4CLNT_SERVER_SCOPE_MISMATCH, \
- "SERVER_SCOPE_MISMATCH" }, \
- { NFS4CLNT_PURGE_STATE, "PURGE_STATE" }, \
- { NFS4CLNT_BIND_CONN_TO_SESSION, \
- "BIND_CONN_TO_SESSION" }, \
- { NFS4CLNT_MOVED, "MOVED" }, \
- { NFS4CLNT_LEASE_MOVED, "LEASE_MOVED" }, \
- { NFS4CLNT_DELEGATION_EXPIRED, "DELEGATION_EXPIRED" }, \
- { NFS4CLNT_RUN_MANAGER, "RUN_MANAGER" }, \
- { NFS4CLNT_RECALL_RUNNING, "RECALL_RUNNING" }, \
- { NFS4CLNT_RECALL_ANY_LAYOUT_READ, "RECALL_ANY_LAYOUT_READ" }, \
- { NFS4CLNT_RECALL_ANY_LAYOUT_RW, "RECALL_ANY_LAYOUT_RW" })
+ { BIT(NFS4CLNT_MANAGER_RUNNING), "MANAGER_RUNNING" }, \
+ { BIT(NFS4CLNT_CHECK_LEASE), "CHECK_LEASE" }, \
+ { BIT(NFS4CLNT_LEASE_EXPIRED), "LEASE_EXPIRED" }, \
+ { BIT(NFS4CLNT_RECLAIM_REBOOT), "RECLAIM_REBOOT" }, \
+ { BIT(NFS4CLNT_RECLAIM_NOGRACE), "RECLAIM_NOGRACE" }, \
+ { BIT(NFS4CLNT_DELEGRETURN), "DELEGRETURN" }, \
+ { BIT(NFS4CLNT_SESSION_RESET), "SESSION_RESET" }, \
+ { BIT(NFS4CLNT_LEASE_CONFIRM), "LEASE_CONFIRM" }, \
+ { BIT(NFS4CLNT_SERVER_SCOPE_MISMATCH), "SERVER_SCOPE_MISMATCH" }, \
+ { BIT(NFS4CLNT_PURGE_STATE), "PURGE_STATE" }, \
+ { BIT(NFS4CLNT_BIND_CONN_TO_SESSION), "BIND_CONN_TO_SESSION" }, \
+ { BIT(NFS4CLNT_MOVED), "MOVED" }, \
+ { BIT(NFS4CLNT_LEASE_MOVED), "LEASE_MOVED" }, \
+ { BIT(NFS4CLNT_DELEGATION_EXPIRED), "DELEGATION_EXPIRED" }, \
+ { BIT(NFS4CLNT_RUN_MANAGER), "RUN_MANAGER" }, \
+ { BIT(NFS4CLNT_MANAGER_AVAILABLE), "MANAGER_AVAILABLE" }, \
+ { BIT(NFS4CLNT_RECALL_RUNNING), "RECALL_RUNNING" }, \
+ { BIT(NFS4CLNT_RECALL_ANY_LAYOUT_READ), "RECALL_ANY_LAYOUT_READ" }, \
+ { BIT(NFS4CLNT_RECALL_ANY_LAYOUT_RW), "RECALL_ANY_LAYOUT_RW" }, \
+ { BIT(NFS4CLNT_DELEGRETURN_DELAYED), "DELERETURN_DELAYED" })
TRACE_EVENT(nfs4_state_mgr,
TP_PROTO(
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 364/885] NFS: fix disabling of swap
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (362 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 363/885] nfs4trace: fix state manager flag printing Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 365/885] spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one() Greg Kroah-Hartman
` (523 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Olga Kornievskaia, NeilBrown,
Anna Schumaker, Sasha Levin
From: NeilBrown <neilb@suse.de>
[ Upstream commit 5bab56fff53ce161ed859d9559a10361d4f79578 ]
When swap is activated to a file on an NFSv4 mount we arrange that the
state manager thread is always present as starting a new thread requires
memory allocations that might block waiting for swap.
Unfortunately the code for allowing the state manager thread to exit when
swap is disabled was not tested properly and does not work.
This can be seen by examining /proc/fs/nfsfs/servers after disabling swap
and unmounting the filesystem. The servers file will still list one
entry. Also a "ps" listing will show the state manager thread is still
present.
There are two problems.
1/ rpc_clnt_swap_deactivate() doesn't walk up the ->cl_parent list to
find the primary client on which the state manager runs.
2/ The thread is not woken up properly and it immediately goes back to
sleep without checking whether it is really needed. Using
nfs4_schedule_state_manager() ensures a proper wake-up.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 4dc73c679114 ("NFSv4: keep state manager thread active if swap is enabled")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/nfs4proc.c | 4 +++-
net/sunrpc/clnt.c | 2 ++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index e51044a5f550f..d70da78e698d2 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -10609,7 +10609,9 @@ static void nfs4_disable_swap(struct inode *inode)
/* The state manager thread will now exit once it is
* woken.
*/
- wake_up_var(&NFS_SERVER(inode)->nfs_client->cl_state);
+ struct nfs_client *clp = NFS_SERVER(inode)->nfs_client;
+
+ nfs4_schedule_state_manager(clp);
}
static const struct inode_operations nfs4_dir_inode_operations = {
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 0b0b9f1eed469..fd7e1c630493e 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -3350,6 +3350,8 @@ rpc_clnt_swap_deactivate_callback(struct rpc_clnt *clnt,
void
rpc_clnt_swap_deactivate(struct rpc_clnt *clnt)
{
+ while (clnt != clnt->cl_parent)
+ clnt = clnt->cl_parent;
if (atomic_dec_if_positive(&clnt->cl_swapper) == 0)
rpc_clnt_iterate_for_each_xprt(clnt,
rpc_clnt_swap_deactivate_callback, NULL);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 365/885] spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (363 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 364/885] NFS: fix disabling of swap Greg Kroah-Hartman
@ 2023-03-07 16:54 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 366/885] ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared Greg Kroah-Hartman
` (522 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:54 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christophe JAILLET, Jassi Brar,
Mark Brown, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit e6a0b671880207566e1ece983bf989dde60bc1d7 ]
wait_for_completion_timeout() never returns a <0 value. It returns either
on timeout or a positive value (at least 1, or number of jiffies left
till timeout)
So, fix the error handling path and return -ETIMEDOUT should a timeout
occur.
Fixes: b0823ee35cf9 ("spi: Add spi driver for Socionext SynQuacer platform")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/c2040bf3cfa201fd8890cfab14fa5a701ffeca14.1676466072.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-synquacer.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-synquacer.c b/drivers/spi/spi-synquacer.c
index 47cbe73137c23..dc188f9202c97 100644
--- a/drivers/spi/spi-synquacer.c
+++ b/drivers/spi/spi-synquacer.c
@@ -472,10 +472,9 @@ static int synquacer_spi_transfer_one(struct spi_master *master,
read_fifo(sspi);
}
- if (status < 0) {
- dev_err(sspi->dev, "failed to transfer. status: 0x%x\n",
- status);
- return status;
+ if (status == 0) {
+ dev_err(sspi->dev, "failed to transfer. Timeout.\n");
+ return -ETIMEDOUT;
}
return 0;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 366/885] ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (364 preceding siblings ...)
2023-03-07 16:54 ` [PATCH 6.1 365/885] spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one() Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 367/885] HID: bigben: use spinlock to protect concurrent accesses Greg Kroah-Hartman
` (521 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lucas Tanure, Charles Keepax,
AngeloGioacchino Del Regno, Mark Brown, Sasha Levin
From: Lucas Tanure <lucas.tanure@collabora.com>
[ Upstream commit fdff966bfde7cf0c85562d2bfb1ff1ba83da5f7b ]
Add struct snd_pcm_substream forward declaration
Fixes: 078a85f2806f ("ASoC: dapm: Only power up active channels from a DAI")
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230215132851.1626881-1-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/sound/soc-dapm.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index ebb8e7a7fc29e..9f2b1e6d858f7 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -16,6 +16,7 @@
#include <sound/asoc.h>
struct device;
+struct snd_pcm_substream;
struct snd_soc_pcm_runtime;
struct soc_enum;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 367/885] HID: bigben: use spinlock to protect concurrent accesses
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (365 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 366/885] ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 368/885] HID: bigben_worker() remove unneeded check on report_field Greg Kroah-Hartman
` (520 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pietro Borrello, Benjamin Tissoires,
Sasha Levin
From: Pietro Borrello <borrello@diag.uniroma1.it>
[ Upstream commit 9fefb6201c4f8dd9f58c581b2a66e5cde2895ea2 ]
bigben driver has a worker that may access data concurrently.
Proct the accesses using a spinlock.
Fixes: 256a90ed9e46 ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-1-7860c5763c38@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-bigbenff.c | 52 ++++++++++++++++++++++++++++++++++++--
1 file changed, 50 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/hid-bigbenff.c b/drivers/hid/hid-bigbenff.c
index e8b16665860d6..ed3d2d7bc1dd4 100644
--- a/drivers/hid/hid-bigbenff.c
+++ b/drivers/hid/hid-bigbenff.c
@@ -174,6 +174,7 @@ static __u8 pid0902_rdesc_fixed[] = {
struct bigben_device {
struct hid_device *hid;
struct hid_report *report;
+ spinlock_t lock;
bool removed;
u8 led_state; /* LED1 = 1 .. LED4 = 8 */
u8 right_motor_on; /* right motor off/on 0/1 */
@@ -190,12 +191,27 @@ static void bigben_worker(struct work_struct *work)
struct bigben_device *bigben = container_of(work,
struct bigben_device, worker);
struct hid_field *report_field = bigben->report->field[0];
+ bool do_work_led = false;
+ bool do_work_ff = false;
+ u8 *buf;
+ u32 len;
+ unsigned long flags;
if (bigben->removed || !report_field)
return;
+ buf = hid_alloc_report_buf(bigben->report, GFP_KERNEL);
+ if (!buf)
+ return;
+
+ len = hid_report_len(bigben->report);
+
+ /* LED work */
+ spin_lock_irqsave(&bigben->lock, flags);
+
if (bigben->work_led) {
bigben->work_led = false;
+ do_work_led = true;
report_field->value[0] = 0x01; /* 1 = led message */
report_field->value[1] = 0x08; /* reserved value, always 8 */
report_field->value[2] = bigben->led_state;
@@ -204,11 +220,22 @@ static void bigben_worker(struct work_struct *work)
report_field->value[5] = 0x00; /* padding */
report_field->value[6] = 0x00; /* padding */
report_field->value[7] = 0x00; /* padding */
- hid_hw_request(bigben->hid, bigben->report, HID_REQ_SET_REPORT);
+ hid_output_report(bigben->report, buf);
+ }
+
+ spin_unlock_irqrestore(&bigben->lock, flags);
+
+ if (do_work_led) {
+ hid_hw_raw_request(bigben->hid, bigben->report->id, buf, len,
+ bigben->report->type, HID_REQ_SET_REPORT);
}
+ /* FF work */
+ spin_lock_irqsave(&bigben->lock, flags);
+
if (bigben->work_ff) {
bigben->work_ff = false;
+ do_work_ff = true;
report_field->value[0] = 0x02; /* 2 = rumble effect message */
report_field->value[1] = 0x08; /* reserved value, always 8 */
report_field->value[2] = bigben->right_motor_on;
@@ -217,8 +244,17 @@ static void bigben_worker(struct work_struct *work)
report_field->value[5] = 0x00; /* padding */
report_field->value[6] = 0x00; /* padding */
report_field->value[7] = 0x00; /* padding */
- hid_hw_request(bigben->hid, bigben->report, HID_REQ_SET_REPORT);
+ hid_output_report(bigben->report, buf);
+ }
+
+ spin_unlock_irqrestore(&bigben->lock, flags);
+
+ if (do_work_ff) {
+ hid_hw_raw_request(bigben->hid, bigben->report->id, buf, len,
+ bigben->report->type, HID_REQ_SET_REPORT);
}
+
+ kfree(buf);
}
static int hid_bigben_play_effect(struct input_dev *dev, void *data,
@@ -228,6 +264,7 @@ static int hid_bigben_play_effect(struct input_dev *dev, void *data,
struct bigben_device *bigben = hid_get_drvdata(hid);
u8 right_motor_on;
u8 left_motor_force;
+ unsigned long flags;
if (!bigben) {
hid_err(hid, "no device data\n");
@@ -242,9 +279,12 @@ static int hid_bigben_play_effect(struct input_dev *dev, void *data,
if (right_motor_on != bigben->right_motor_on ||
left_motor_force != bigben->left_motor_force) {
+ spin_lock_irqsave(&bigben->lock, flags);
bigben->right_motor_on = right_motor_on;
bigben->left_motor_force = left_motor_force;
bigben->work_ff = true;
+ spin_unlock_irqrestore(&bigben->lock, flags);
+
schedule_work(&bigben->worker);
}
@@ -259,6 +299,7 @@ static void bigben_set_led(struct led_classdev *led,
struct bigben_device *bigben = hid_get_drvdata(hid);
int n;
bool work;
+ unsigned long flags;
if (!bigben) {
hid_err(hid, "no device data\n");
@@ -267,6 +308,7 @@ static void bigben_set_led(struct led_classdev *led,
for (n = 0; n < NUM_LEDS; n++) {
if (led == bigben->leds[n]) {
+ spin_lock_irqsave(&bigben->lock, flags);
if (value == LED_OFF) {
work = (bigben->led_state & BIT(n));
bigben->led_state &= ~BIT(n);
@@ -274,6 +316,7 @@ static void bigben_set_led(struct led_classdev *led,
work = !(bigben->led_state & BIT(n));
bigben->led_state |= BIT(n);
}
+ spin_unlock_irqrestore(&bigben->lock, flags);
if (work) {
bigben->work_led = true;
@@ -307,8 +350,12 @@ static enum led_brightness bigben_get_led(struct led_classdev *led)
static void bigben_remove(struct hid_device *hid)
{
struct bigben_device *bigben = hid_get_drvdata(hid);
+ unsigned long flags;
+ spin_lock_irqsave(&bigben->lock, flags);
bigben->removed = true;
+ spin_unlock_irqrestore(&bigben->lock, flags);
+
cancel_work_sync(&bigben->worker);
hid_hw_stop(hid);
}
@@ -362,6 +409,7 @@ static int bigben_probe(struct hid_device *hid,
set_bit(FF_RUMBLE, hidinput->input->ffbit);
INIT_WORK(&bigben->worker, bigben_worker);
+ spin_lock_init(&bigben->lock);
error = input_ff_create_memless(hidinput->input, NULL,
hid_bigben_play_effect);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 368/885] HID: bigben_worker() remove unneeded check on report_field
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (366 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 367/885] HID: bigben: use spinlock to protect concurrent accesses Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 369/885] HID: bigben: use spinlock to safely schedule workers Greg Kroah-Hartman
` (519 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pietro Borrello, Benjamin Tissoires,
Sasha Levin
From: Pietro Borrello <borrello@diag.uniroma1.it>
[ Upstream commit 27d2a2fd844ec7da70d19fabb482304fd1e0595b ]
bigben_worker() checks report_field to be non-NULL.
The check has been added in commit
918aa1ef104d ("HID: bigbenff: prevent null pointer dereference")
to prevent a NULL pointer crash.
However, the true root cause was a missing check for output
reports, patched in commit
c7bf714f8755 ("HID: check empty report_list in bigben_probe()"),
where the type-confused report list_entry was overlapping with
a NULL pointer, which was then causing the crash.
Fixes: 918aa1ef104d ("HID: bigbenff: prevent null pointer dereference")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-2-7860c5763c38@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-bigbenff.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hid/hid-bigbenff.c b/drivers/hid/hid-bigbenff.c
index ed3d2d7bc1dd4..b98c5f31c184b 100644
--- a/drivers/hid/hid-bigbenff.c
+++ b/drivers/hid/hid-bigbenff.c
@@ -197,7 +197,7 @@ static void bigben_worker(struct work_struct *work)
u32 len;
unsigned long flags;
- if (bigben->removed || !report_field)
+ if (bigben->removed)
return;
buf = hid_alloc_report_buf(bigben->report, GFP_KERNEL);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 369/885] HID: bigben: use spinlock to safely schedule workers
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (367 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 368/885] HID: bigben_worker() remove unneeded check on report_field Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 370/885] hid: bigben_probe(): validate report count Greg Kroah-Hartman
` (518 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pietro Borrello, Benjamin Tissoires,
Sasha Levin
From: Pietro Borrello <borrello@diag.uniroma1.it>
[ Upstream commit 76ca8da989c7d97a7f76c75d475fe95a584439d7 ]
Use spinlocks to deal with workers introducing a wrapper
bigben_schedule_work(), and several spinlock checks.
Otherwise, bigben_set_led() may schedule bigben->worker after the
structure has been freed, causing a use-after-free.
Fixes: 4eb1b01de5b9 ("HID: hid-bigbenff: fix race condition for scheduled work during removal")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-3-7860c5763c38@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-bigbenff.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/hid/hid-bigbenff.c b/drivers/hid/hid-bigbenff.c
index b98c5f31c184b..9d6560db762b1 100644
--- a/drivers/hid/hid-bigbenff.c
+++ b/drivers/hid/hid-bigbenff.c
@@ -185,6 +185,15 @@ struct bigben_device {
struct work_struct worker;
};
+static inline void bigben_schedule_work(struct bigben_device *bigben)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&bigben->lock, flags);
+ if (!bigben->removed)
+ schedule_work(&bigben->worker);
+ spin_unlock_irqrestore(&bigben->lock, flags);
+}
static void bigben_worker(struct work_struct *work)
{
@@ -197,9 +206,6 @@ static void bigben_worker(struct work_struct *work)
u32 len;
unsigned long flags;
- if (bigben->removed)
- return;
-
buf = hid_alloc_report_buf(bigben->report, GFP_KERNEL);
if (!buf)
return;
@@ -285,7 +291,7 @@ static int hid_bigben_play_effect(struct input_dev *dev, void *data,
bigben->work_ff = true;
spin_unlock_irqrestore(&bigben->lock, flags);
- schedule_work(&bigben->worker);
+ bigben_schedule_work(bigben);
}
return 0;
@@ -320,7 +326,7 @@ static void bigben_set_led(struct led_classdev *led,
if (work) {
bigben->work_led = true;
- schedule_work(&bigben->worker);
+ bigben_schedule_work(bigben);
}
return;
}
@@ -450,7 +456,7 @@ static int bigben_probe(struct hid_device *hid,
bigben->left_motor_force = 0;
bigben->work_led = true;
bigben->work_ff = true;
- schedule_work(&bigben->worker);
+ bigben_schedule_work(bigben);
hid_info(hid, "LED and force feedback support for BigBen gamepad\n");
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 370/885] hid: bigben_probe(): validate report count
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (368 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 369/885] HID: bigben: use spinlock to safely schedule workers Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 371/885] ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks Greg Kroah-Hartman
` (517 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pietro Borrello, Benjamin Tissoires,
Sasha Levin
From: Pietro Borrello <borrello@diag.uniroma1.it>
[ Upstream commit b94335f899542a0da5fafc38af8edcaf90195843 ]
bigben_probe() does not validate that the output report has the
needed report values in the first field.
A malicious device registering a report with one field and a single
value causes an head OOB write in bigben_worker() when
accessing report_field->value[1] to report_field->value[7].
Use hid_validate_values() which takes care of all the needed checks.
Fixes: 256a90ed9e46 ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230211-bigben-oob-v1-1-d2849688594c@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-bigbenff.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/hid/hid-bigbenff.c b/drivers/hid/hid-bigbenff.c
index 9d6560db762b1..a02cb517b4c47 100644
--- a/drivers/hid/hid-bigbenff.c
+++ b/drivers/hid/hid-bigbenff.c
@@ -371,7 +371,6 @@ static int bigben_probe(struct hid_device *hid,
{
struct bigben_device *bigben;
struct hid_input *hidinput;
- struct list_head *report_list;
struct led_classdev *led;
char *name;
size_t name_sz;
@@ -396,14 +395,12 @@ static int bigben_probe(struct hid_device *hid,
return error;
}
- report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
- if (list_empty(report_list)) {
+ bigben->report = hid_validate_values(hid, HID_OUTPUT_REPORT, 0, 0, 8);
+ if (!bigben->report) {
hid_err(hid, "no output report found\n");
error = -ENODEV;
goto error_hw_stop;
}
- bigben->report = list_entry(report_list->next,
- struct hid_report, list);
if (list_empty(&hid->inputs)) {
hid_err(hid, "no inputs found\n");
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 371/885] ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (369 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 370/885] hid: bigben_probe(): validate report count Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 372/885] drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() Greg Kroah-Hartman
` (516 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Orlando Chamberlain, Takashi Iwai,
Sasha Levin
From: Orlando Chamberlain <orlandoch.dev@gmail.com>
[ Upstream commit 5beb5627a2481aade9aa630b7ebb7f99442321b6 ]
Commit 586bc4aab878 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for
AMD") caused only AMD gpu's with PX to have their audio component register
with vga_switcheroo. This meant that Apple Macbooks with apple-gmux as the
gpu switcher no longer had the audio client registering, so when the gpu is
powered off by vga_switcheroo snd_hda_intel is unaware that it should have
suspended the device:
amdgpu: switched off
snd_hda_intel 0000:03:00.1:
Unable to change power state from D3hot to D0, device inaccessible
snd_hda_intel 0000:03:00.1: CORB reset timeout#2, CORBRP = 65535
To resolve this, we use apple_gmux_detect() and register a
vga_switcheroo audio client when apple-gmux is detected.
Fixes: 586bc4aab878 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD")
Link: https://lore.kernel.org/all/20230210044826.9834-9-orlandoch.dev@gmail.com/
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20230216103450.12925-1-orlandoch.dev@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/pci/hda/hda_intel.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 2dbc082076f69..81c4a45254ff2 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -50,6 +50,7 @@
#include <sound/intel-dsp-config.h>
#include <linux/vgaarb.h>
#include <linux/vga_switcheroo.h>
+#include <linux/apple-gmux.h>
#include <linux/firmware.h>
#include <sound/hda_codec.h>
#include "hda_controller.h"
@@ -1466,7 +1467,7 @@ static struct pci_dev *get_bound_vga(struct pci_dev *pci)
* vgaswitcheroo.
*/
if (((p->class >> 16) == PCI_BASE_CLASS_DISPLAY) &&
- atpx_present())
+ (atpx_present() || apple_gmux_detect(NULL, NULL)))
return p;
pci_dev_put(p);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 372/885] drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (370 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 371/885] ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 373/885] NFSD: enhance inter-server copy cleanup Greg Kroah-Hartman
` (515 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Asahi Lina,
Javier Martinez Canillas, Sasha Levin
From: Asahi Lina <lina@asahilina.net>
[ Upstream commit ddddedaa0db99481c5e5abe628ad54f65e8765bc ]
Other functions touching shmem->sgt take the pages lock, so do that here
too. drm_gem_shmem_get_pages() & co take the same lock, so move to the
_locked() variants to avoid recursive locking.
Discovered while auditing locking to write the Rust abstractions.
Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects")
Fixes: 4fa3d66f132b ("drm/shmem: Do dma_unmap_sg before purging pages")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net
(cherry picked from commit aa8c85affe3facd3842c8912186623415931cc72)
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_gem_shmem_helper.c | 54 ++++++++++++++++----------
1 file changed, 34 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/drm_gem_shmem_helper.c b/drivers/gpu/drm/drm_gem_shmem_helper.c
index b602cd72a1205..2c559b310cad3 100644
--- a/drivers/gpu/drm/drm_gem_shmem_helper.c
+++ b/drivers/gpu/drm/drm_gem_shmem_helper.c
@@ -681,23 +681,7 @@ struct sg_table *drm_gem_shmem_get_sg_table(struct drm_gem_shmem_object *shmem)
}
EXPORT_SYMBOL_GPL(drm_gem_shmem_get_sg_table);
-/**
- * drm_gem_shmem_get_pages_sgt - Pin pages, dma map them, and return a
- * scatter/gather table for a shmem GEM object.
- * @shmem: shmem GEM object
- *
- * This function returns a scatter/gather table suitable for driver usage. If
- * the sg table doesn't exist, the pages are pinned, dma-mapped, and a sg
- * table created.
- *
- * This is the main function for drivers to get at backing storage, and it hides
- * and difference between dma-buf imported and natively allocated objects.
- * drm_gem_shmem_get_sg_table() should not be directly called by drivers.
- *
- * Returns:
- * A pointer to the scatter/gather table of pinned pages or errno on failure.
- */
-struct sg_table *drm_gem_shmem_get_pages_sgt(struct drm_gem_shmem_object *shmem)
+static struct sg_table *drm_gem_shmem_get_pages_sgt_locked(struct drm_gem_shmem_object *shmem)
{
struct drm_gem_object *obj = &shmem->base;
int ret;
@@ -708,7 +692,7 @@ struct sg_table *drm_gem_shmem_get_pages_sgt(struct drm_gem_shmem_object *shmem)
WARN_ON(obj->import_attach);
- ret = drm_gem_shmem_get_pages(shmem);
+ ret = drm_gem_shmem_get_pages_locked(shmem);
if (ret)
return ERR_PTR(ret);
@@ -730,10 +714,40 @@ struct sg_table *drm_gem_shmem_get_pages_sgt(struct drm_gem_shmem_object *shmem)
sg_free_table(sgt);
kfree(sgt);
err_put_pages:
- drm_gem_shmem_put_pages(shmem);
+ drm_gem_shmem_put_pages_locked(shmem);
return ERR_PTR(ret);
}
-EXPORT_SYMBOL_GPL(drm_gem_shmem_get_pages_sgt);
+
+/**
+ * drm_gem_shmem_get_pages_sgt - Pin pages, dma map them, and return a
+ * scatter/gather table for a shmem GEM object.
+ * @shmem: shmem GEM object
+ *
+ * This function returns a scatter/gather table suitable for driver usage. If
+ * the sg table doesn't exist, the pages are pinned, dma-mapped, and a sg
+ * table created.
+ *
+ * This is the main function for drivers to get at backing storage, and it hides
+ * and difference between dma-buf imported and natively allocated objects.
+ * drm_gem_shmem_get_sg_table() should not be directly called by drivers.
+ *
+ * Returns:
+ * A pointer to the scatter/gather table of pinned pages or errno on failure.
+ */
+struct sg_table *drm_gem_shmem_get_pages_sgt(struct drm_gem_shmem_object *shmem)
+{
+ int ret;
+ struct sg_table *sgt;
+
+ ret = mutex_lock_interruptible(&shmem->pages_lock);
+ if (ret)
+ return ERR_PTR(ret);
+ sgt = drm_gem_shmem_get_pages_sgt_locked(shmem);
+ mutex_unlock(&shmem->pages_lock);
+
+ return sgt;
+}
+EXPORT_SYMBOL(drm_gem_shmem_get_pages_sgt);
/**
* drm_gem_shmem_prime_import_sg_table - Produce a shmem GEM object from
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 373/885] NFSD: enhance inter-server copy cleanup
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (371 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 372/885] drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 374/885] NFSD: fix leaked reference count of nfsd4_ssc_umount_item Greg Kroah-Hartman
` (514 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dai Ngo, Chuck Lever,
Olga Kornievskaia, Sasha Levin
From: Dai Ngo <dai.ngo@oracle.com>
[ Upstream commit df24ac7a2e3a9d0bc68f1756a880e50bfe4b4522 ]
Currently nfsd4_setup_inter_ssc returns the vfsmount of the source
server's export when the mount completes. After the copy is done
nfsd4_cleanup_inter_ssc is called with the vfsmount of the source
server and it searches nfsd_ssc_mount_list for a matching entry
to do the clean up.
The problems with this approach are (1) the need to search the
nfsd_ssc_mount_list and (2) the code has to handle the case where
the matching entry is not found which looks ugly.
The enhancement is instead of nfsd4_setup_inter_ssc returning the
vfsmount, it returns the nfsd4_ssc_umount_item which has the
vfsmount embedded in it. When nfsd4_cleanup_inter_ssc is called
it's passed with the nfsd4_ssc_umount_item directly to do the
clean up so no searching is needed and there is no need to handle
the 'not found' case.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: adjusted whitespace and variable/function names ]
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
Stable-dep-of: 34e8f9ec4c9a ("NFSD: fix leaked reference count of nfsd4_ssc_umount_item")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs4proc.c | 111 ++++++++++++++++------------------------
fs/nfsd/xdr4.h | 2 +-
include/linux/nfs_ssc.h | 2 +-
3 files changed, 46 insertions(+), 69 deletions(-)
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index ba04ce9b9fa51..92b63e51d28da 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1306,15 +1306,15 @@ extern void nfs_sb_deactive(struct super_block *sb);
* setup a work entry in the ssc delayed unmount list.
*/
static __be32 nfsd4_ssc_setup_dul(struct nfsd_net *nn, char *ipaddr,
- struct nfsd4_ssc_umount_item **retwork, struct vfsmount **ss_mnt)
+ struct nfsd4_ssc_umount_item **nsui)
{
struct nfsd4_ssc_umount_item *ni = NULL;
struct nfsd4_ssc_umount_item *work = NULL;
struct nfsd4_ssc_umount_item *tmp;
DEFINE_WAIT(wait);
+ __be32 status = 0;
- *ss_mnt = NULL;
- *retwork = NULL;
+ *nsui = NULL;
work = kzalloc(sizeof(*work), GFP_KERNEL);
try_again:
spin_lock(&nn->nfsd_ssc_lock);
@@ -1338,12 +1338,12 @@ static __be32 nfsd4_ssc_setup_dul(struct nfsd_net *nn, char *ipaddr,
finish_wait(&nn->nfsd_ssc_waitq, &wait);
goto try_again;
}
- *ss_mnt = ni->nsui_vfsmount;
+ *nsui = ni;
refcount_inc(&ni->nsui_refcnt);
spin_unlock(&nn->nfsd_ssc_lock);
kfree(work);
- /* return vfsmount in ss_mnt */
+ /* return vfsmount in (*nsui)->nsui_vfsmount */
return 0;
}
if (work) {
@@ -1351,31 +1351,32 @@ static __be32 nfsd4_ssc_setup_dul(struct nfsd_net *nn, char *ipaddr,
refcount_set(&work->nsui_refcnt, 2);
work->nsui_busy = true;
list_add_tail(&work->nsui_list, &nn->nfsd_ssc_mount_list);
- *retwork = work;
- }
+ *nsui = work;
+ } else
+ status = nfserr_resource;
spin_unlock(&nn->nfsd_ssc_lock);
- return 0;
+ return status;
}
-static void nfsd4_ssc_update_dul_work(struct nfsd_net *nn,
- struct nfsd4_ssc_umount_item *work, struct vfsmount *ss_mnt)
+static void nfsd4_ssc_update_dul(struct nfsd_net *nn,
+ struct nfsd4_ssc_umount_item *nsui,
+ struct vfsmount *ss_mnt)
{
- /* set nsui_vfsmount, clear busy flag and wakeup waiters */
spin_lock(&nn->nfsd_ssc_lock);
- work->nsui_vfsmount = ss_mnt;
- work->nsui_busy = false;
+ nsui->nsui_vfsmount = ss_mnt;
+ nsui->nsui_busy = false;
wake_up_all(&nn->nfsd_ssc_waitq);
spin_unlock(&nn->nfsd_ssc_lock);
}
-static void nfsd4_ssc_cancel_dul_work(struct nfsd_net *nn,
- struct nfsd4_ssc_umount_item *work)
+static void nfsd4_ssc_cancel_dul(struct nfsd_net *nn,
+ struct nfsd4_ssc_umount_item *nsui)
{
spin_lock(&nn->nfsd_ssc_lock);
- list_del(&work->nsui_list);
+ list_del(&nsui->nsui_list);
wake_up_all(&nn->nfsd_ssc_waitq);
spin_unlock(&nn->nfsd_ssc_lock);
- kfree(work);
+ kfree(nsui);
}
/*
@@ -1383,7 +1384,7 @@ static void nfsd4_ssc_cancel_dul_work(struct nfsd_net *nn,
*/
static __be32
nfsd4_interssc_connect(struct nl4_server *nss, struct svc_rqst *rqstp,
- struct vfsmount **mount)
+ struct nfsd4_ssc_umount_item **nsui)
{
struct file_system_type *type;
struct vfsmount *ss_mnt;
@@ -1394,7 +1395,6 @@ nfsd4_interssc_connect(struct nl4_server *nss, struct svc_rqst *rqstp,
char *ipaddr, *dev_name, *raw_data;
int len, raw_len;
__be32 status = nfserr_inval;
- struct nfsd4_ssc_umount_item *work = NULL;
struct nfsd_net *nn = net_generic(SVC_NET(rqstp), nfsd_net_id);
naddr = &nss->u.nl4_addr;
@@ -1402,6 +1402,7 @@ nfsd4_interssc_connect(struct nl4_server *nss, struct svc_rqst *rqstp,
naddr->addr_len,
(struct sockaddr *)&tmp_addr,
sizeof(tmp_addr));
+ *nsui = NULL;
if (tmp_addrlen == 0)
goto out_err;
@@ -1444,10 +1445,10 @@ nfsd4_interssc_connect(struct nl4_server *nss, struct svc_rqst *rqstp,
goto out_free_rawdata;
snprintf(dev_name, len + 5, "%s%s%s:/", startsep, ipaddr, endsep);
- status = nfsd4_ssc_setup_dul(nn, ipaddr, &work, &ss_mnt);
+ status = nfsd4_ssc_setup_dul(nn, ipaddr, nsui);
if (status)
goto out_free_devname;
- if (ss_mnt)
+ if ((*nsui)->nsui_vfsmount)
goto out_done;
/* Use an 'internal' mount: SB_KERNMOUNT -> MNT_INTERNAL */
@@ -1455,15 +1456,12 @@ nfsd4_interssc_connect(struct nl4_server *nss, struct svc_rqst *rqstp,
module_put(type->owner);
if (IS_ERR(ss_mnt)) {
status = nfserr_nodev;
- if (work)
- nfsd4_ssc_cancel_dul_work(nn, work);
+ nfsd4_ssc_cancel_dul(nn, *nsui);
goto out_free_devname;
}
- if (work)
- nfsd4_ssc_update_dul_work(nn, work, ss_mnt);
+ nfsd4_ssc_update_dul(nn, *nsui, ss_mnt);
out_done:
status = 0;
- *mount = ss_mnt;
out_free_devname:
kfree(dev_name);
@@ -1487,7 +1485,7 @@ nfsd4_interssc_connect(struct nl4_server *nss, struct svc_rqst *rqstp,
static __be32
nfsd4_setup_inter_ssc(struct svc_rqst *rqstp,
struct nfsd4_compound_state *cstate,
- struct nfsd4_copy *copy, struct vfsmount **mount)
+ struct nfsd4_copy *copy)
{
struct svc_fh *s_fh = NULL;
stateid_t *s_stid = ©->cp_src_stateid;
@@ -1500,7 +1498,7 @@ nfsd4_setup_inter_ssc(struct svc_rqst *rqstp,
if (status)
goto out;
- status = nfsd4_interssc_connect(copy->cp_src, rqstp, mount);
+ status = nfsd4_interssc_connect(copy->cp_src, rqstp, ©->ss_nsui);
if (status)
goto out;
@@ -1518,45 +1516,27 @@ nfsd4_setup_inter_ssc(struct svc_rqst *rqstp,
}
static void
-nfsd4_cleanup_inter_ssc(struct vfsmount *ss_mnt, struct file *filp,
+nfsd4_cleanup_inter_ssc(struct nfsd4_ssc_umount_item *nsui, struct file *filp,
struct nfsd_file *dst)
{
- bool found = false;
- long timeout;
- struct nfsd4_ssc_umount_item *tmp;
- struct nfsd4_ssc_umount_item *ni = NULL;
struct nfsd_net *nn = net_generic(dst->nf_net, nfsd_net_id);
+ long timeout = msecs_to_jiffies(nfsd4_ssc_umount_timeout);
nfs42_ssc_close(filp);
nfsd_file_put(dst);
fput(filp);
- if (!nn) {
- mntput(ss_mnt);
- return;
- }
spin_lock(&nn->nfsd_ssc_lock);
- timeout = msecs_to_jiffies(nfsd4_ssc_umount_timeout);
- list_for_each_entry_safe(ni, tmp, &nn->nfsd_ssc_mount_list, nsui_list) {
- if (ni->nsui_vfsmount->mnt_sb == ss_mnt->mnt_sb) {
- list_del(&ni->nsui_list);
- /*
- * vfsmount can be shared by multiple exports,
- * decrement refcnt. If the count drops to 1 it
- * will be unmounted when nsui_expire expires.
- */
- refcount_dec(&ni->nsui_refcnt);
- ni->nsui_expire = jiffies + timeout;
- list_add_tail(&ni->nsui_list, &nn->nfsd_ssc_mount_list);
- found = true;
- break;
- }
- }
+ list_del(&nsui->nsui_list);
+ /*
+ * vfsmount can be shared by multiple exports,
+ * decrement refcnt. If the count drops to 1 it
+ * will be unmounted when nsui_expire expires.
+ */
+ refcount_dec(&nsui->nsui_refcnt);
+ nsui->nsui_expire = jiffies + timeout;
+ list_add_tail(&nsui->nsui_list, &nn->nfsd_ssc_mount_list);
spin_unlock(&nn->nfsd_ssc_lock);
- if (!found) {
- mntput(ss_mnt);
- return;
- }
}
#else /* CONFIG_NFSD_V4_2_INTER_SSC */
@@ -1564,15 +1544,13 @@ nfsd4_cleanup_inter_ssc(struct vfsmount *ss_mnt, struct file *filp,
static __be32
nfsd4_setup_inter_ssc(struct svc_rqst *rqstp,
struct nfsd4_compound_state *cstate,
- struct nfsd4_copy *copy,
- struct vfsmount **mount)
+ struct nfsd4_copy *copy)
{
- *mount = NULL;
return nfserr_inval;
}
static void
-nfsd4_cleanup_inter_ssc(struct vfsmount *ss_mnt, struct file *filp,
+nfsd4_cleanup_inter_ssc(struct nfsd4_ssc_umount_item *nsui, struct file *filp,
struct nfsd_file *dst)
{
}
@@ -1713,7 +1691,7 @@ static void dup_copy_fields(struct nfsd4_copy *src, struct nfsd4_copy *dst)
memcpy(dst->cp_src, src->cp_src, sizeof(struct nl4_server));
memcpy(&dst->stateid, &src->stateid, sizeof(src->stateid));
memcpy(&dst->c_fh, &src->c_fh, sizeof(src->c_fh));
- dst->ss_mnt = src->ss_mnt;
+ dst->ss_nsui = src->ss_nsui;
}
static void cleanup_async_copy(struct nfsd4_copy *copy)
@@ -1762,8 +1740,8 @@ static int nfsd4_do_async_copy(void *data)
if (nfsd4_ssc_is_inter(copy)) {
struct file *filp;
- filp = nfs42_ssc_open(copy->ss_mnt, ©->c_fh,
- ©->stateid);
+ filp = nfs42_ssc_open(copy->ss_nsui->nsui_vfsmount,
+ ©->c_fh, ©->stateid);
if (IS_ERR(filp)) {
switch (PTR_ERR(filp)) {
case -EBADF:
@@ -1777,7 +1755,7 @@ static int nfsd4_do_async_copy(void *data)
}
nfserr = nfsd4_do_copy(copy, filp, copy->nf_dst->nf_file,
false);
- nfsd4_cleanup_inter_ssc(copy->ss_mnt, filp, copy->nf_dst);
+ nfsd4_cleanup_inter_ssc(copy->ss_nsui, filp, copy->nf_dst);
} else {
nfserr = nfsd4_do_copy(copy, copy->nf_src->nf_file,
copy->nf_dst->nf_file, false);
@@ -1803,8 +1781,7 @@ nfsd4_copy(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
status = nfserr_notsupp;
goto out;
}
- status = nfsd4_setup_inter_ssc(rqstp, cstate, copy,
- ©->ss_mnt);
+ status = nfsd4_setup_inter_ssc(rqstp, cstate, copy);
if (status)
return nfserr_offload_denied;
} else {
diff --git a/fs/nfsd/xdr4.h b/fs/nfsd/xdr4.h
index 0eb00105d845b..36c3340c1d54a 100644
--- a/fs/nfsd/xdr4.h
+++ b/fs/nfsd/xdr4.h
@@ -571,7 +571,7 @@ struct nfsd4_copy {
struct task_struct *copy_task;
refcount_t refcount;
- struct vfsmount *ss_mnt;
+ struct nfsd4_ssc_umount_item *ss_nsui;
struct nfs_fh c_fh;
nfs4_stateid stateid;
};
diff --git a/include/linux/nfs_ssc.h b/include/linux/nfs_ssc.h
index 75843c00f326a..22265b1ff0800 100644
--- a/include/linux/nfs_ssc.h
+++ b/include/linux/nfs_ssc.h
@@ -53,6 +53,7 @@ static inline void nfs42_ssc_close(struct file *filep)
if (nfs_ssc_client_tbl.ssc_nfs4_ops)
(*nfs_ssc_client_tbl.ssc_nfs4_ops->sco_close)(filep);
}
+#endif
struct nfsd4_ssc_umount_item {
struct list_head nsui_list;
@@ -66,7 +67,6 @@ struct nfsd4_ssc_umount_item {
struct vfsmount *nsui_vfsmount;
char nsui_ipaddr[RPC_MAX_ADDRBUFLEN + 1];
};
-#endif
/*
* NFS_FS
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 374/885] NFSD: fix leaked reference count of nfsd4_ssc_umount_item
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (372 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 373/885] NFSD: enhance inter-server copy cleanup Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 375/885] nfsd: fix race to check ls_layouts Greg Kroah-Hartman
` (513 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dai Ngo, Jeff Layton, Chuck Lever,
Sasha Levin
From: Dai Ngo <dai.ngo@oracle.com>
[ Upstream commit 34e8f9ec4c9ac235f917747b23a200a5e0ec857b ]
The reference count of nfsd4_ssc_umount_item is not decremented
on error conditions. This prevents the laundromat from unmounting
the vfsmount of the source file.
This patch decrements the reference count of nfsd4_ssc_umount_item
on error.
Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs4proc.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index 92b63e51d28da..32652b5e6eff3 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1827,13 +1827,17 @@ nfsd4_copy(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
out:
return status;
out_err:
+ if (nfsd4_ssc_is_inter(copy)) {
+ /*
+ * Source's vfsmount of inter-copy will be unmounted
+ * by the laundromat. Use copy instead of async_copy
+ * since async_copy->ss_nsui might not be set yet.
+ */
+ refcount_dec(©->ss_nsui->nsui_refcnt);
+ }
if (async_copy)
cleanup_async_copy(async_copy);
status = nfserrno(-ENOMEM);
- /*
- * source's vfsmount of inter-copy will be unmounted
- * by the laundromat
- */
goto out;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 375/885] nfsd: fix race to check ls_layouts
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (373 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 374/885] NFSD: fix leaked reference count of nfsd4_ssc_umount_item Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 376/885] nfsd: clean up potential nfsd_file refcount leaks in COPY codepath Greg Kroah-Hartman
` (512 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Benjamin Coddington, Jeff Layton,
Chuck Lever, Sasha Levin
From: Benjamin Coddington <bcodding@redhat.com>
[ Upstream commit fb610c4dbc996415d57d7090957ecddd4fd64fb6 ]
Its possible for __break_lease to find the layout's lease before we've
added the layout to the owner's ls_layouts list. In that case, setting
ls_recalled = true without actually recalling the layout will cause the
server to never send a recall callback.
Move the check for ls_layouts before setting ls_recalled.
Fixes: c5c707f96fc9 ("nfsd: implement pNFS layout recalls")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs4layouts.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/nfsd/nfs4layouts.c b/fs/nfsd/nfs4layouts.c
index 3564d1c6f6104..e8a80052cb1ba 100644
--- a/fs/nfsd/nfs4layouts.c
+++ b/fs/nfsd/nfs4layouts.c
@@ -323,11 +323,11 @@ nfsd4_recall_file_layout(struct nfs4_layout_stateid *ls)
if (ls->ls_recalled)
goto out_unlock;
- ls->ls_recalled = true;
- atomic_inc(&ls->ls_stid.sc_file->fi_lo_recalls);
if (list_empty(&ls->ls_layouts))
goto out_unlock;
+ ls->ls_recalled = true;
+ atomic_inc(&ls->ls_stid.sc_file->fi_lo_recalls);
trace_nfsd_layout_recall(&ls->ls_stid.sc_stateid);
refcount_inc(&ls->ls_stid.sc_count);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 376/885] nfsd: clean up potential nfsd_file refcount leaks in COPY codepath
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (374 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 375/885] nfsd: fix race to check ls_layouts Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 377/885] NFSD: fix problems with cleanup on errors in nfsd4_copy Greg Kroah-Hartman
` (511 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jeff Layton, Chuck Lever, Sasha Levin
From: Jeff Layton <jlayton@kernel.org>
[ Upstream commit 6ba434cb1a8d403ea9aad1b667c3ea3ad8b3191f ]
There are two different flavors of the nfsd4_copy struct. One is
embedded in the compound and is used directly in synchronous copies. The
other is dynamically allocated, refcounted and tracked in the client
struture. For the embedded one, the cleanup just involves releasing any
nfsd_files held on its behalf. For the async one, the cleanup is a bit
more involved, and we need to dequeue it from lists, unhash it, etc.
There is at least one potential refcount leak in this code now. If the
kthread_create call fails, then both the src and dst nfsd_files in the
original nfsd4_copy object are leaked.
The cleanup in this codepath is also sort of weird. In the async copy
case, we'll have up to four nfsd_file references (src and dst for both
flavors of copy structure). They are both put at the end of
nfsd4_do_async_copy, even though the ones held on behalf of the embedded
one outlive that structure.
Change it so that we always clean up the nfsd_file refs held by the
embedded copy structure before nfsd4_copy returns. Rework
cleanup_async_copy to handle both inter and intra copies. Eliminate
nfsd4_cleanup_intra_ssc since it now becomes a no-op.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 81e722978ad2 ("NFSD: fix problems with cleanup on errors in nfsd4_copy")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs4proc.c | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index 32652b5e6eff3..043cef25d3dbd 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1523,7 +1523,6 @@ nfsd4_cleanup_inter_ssc(struct nfsd4_ssc_umount_item *nsui, struct file *filp,
long timeout = msecs_to_jiffies(nfsd4_ssc_umount_timeout);
nfs42_ssc_close(filp);
- nfsd_file_put(dst);
fput(filp);
spin_lock(&nn->nfsd_ssc_lock);
@@ -1573,13 +1572,6 @@ nfsd4_setup_intra_ssc(struct svc_rqst *rqstp,
©->nf_dst);
}
-static void
-nfsd4_cleanup_intra_ssc(struct nfsd_file *src, struct nfsd_file *dst)
-{
- nfsd_file_put(src);
- nfsd_file_put(dst);
-}
-
static void nfsd4_cb_offload_release(struct nfsd4_callback *cb)
{
struct nfsd4_cb_offload *cbo =
@@ -1694,12 +1686,18 @@ static void dup_copy_fields(struct nfsd4_copy *src, struct nfsd4_copy *dst)
dst->ss_nsui = src->ss_nsui;
}
+static void release_copy_files(struct nfsd4_copy *copy)
+{
+ if (copy->nf_src)
+ nfsd_file_put(copy->nf_src);
+ if (copy->nf_dst)
+ nfsd_file_put(copy->nf_dst);
+}
+
static void cleanup_async_copy(struct nfsd4_copy *copy)
{
nfs4_free_copy_state(copy);
- nfsd_file_put(copy->nf_dst);
- if (!nfsd4_ssc_is_inter(copy))
- nfsd_file_put(copy->nf_src);
+ release_copy_files(copy);
spin_lock(©->cp_clp->async_lock);
list_del(©->copies);
spin_unlock(©->cp_clp->async_lock);
@@ -1759,7 +1757,6 @@ static int nfsd4_do_async_copy(void *data)
} else {
nfserr = nfsd4_do_copy(copy, copy->nf_src->nf_file,
copy->nf_dst->nf_file, false);
- nfsd4_cleanup_intra_ssc(copy->nf_src, copy->nf_dst);
}
do_callback:
@@ -1822,9 +1819,9 @@ nfsd4_copy(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
} else {
status = nfsd4_do_copy(copy, copy->nf_src->nf_file,
copy->nf_dst->nf_file, true);
- nfsd4_cleanup_intra_ssc(copy->nf_src, copy->nf_dst);
}
out:
+ release_copy_files(copy);
return status;
out_err:
if (nfsd4_ssc_is_inter(copy)) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 377/885] NFSD: fix problems with cleanup on errors in nfsd4_copy
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (375 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 376/885] nfsd: clean up potential nfsd_file refcount leaks in COPY codepath Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 378/885] nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open Greg Kroah-Hartman
` (510 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dai Ngo, Jeff Layton, Chuck Lever,
Sasha Levin
From: Dai Ngo <dai.ngo@oracle.com>
[ Upstream commit 81e722978ad21072470b73d8f6a50ad62c7d5b7d ]
When nfsd4_copy fails to allocate memory for async_copy->cp_src, or
nfs4_init_copy_state fails, it calls cleanup_async_copy to do the
cleanup for the async_copy which causes page fault since async_copy
is not yet initialized.
This patche rearranges the order of initializing the fields in
async_copy and adds checks in cleanup_async_copy to skip un-initialized
fields.
Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Fixes: 87689df69491 ("NFSD: Shrink size of struct nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs4proc.c | 12 ++++++++----
fs/nfsd/nfs4state.c | 5 +++--
2 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index 043cef25d3dbd..53113976e6424 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1698,9 +1698,12 @@ static void cleanup_async_copy(struct nfsd4_copy *copy)
{
nfs4_free_copy_state(copy);
release_copy_files(copy);
- spin_lock(©->cp_clp->async_lock);
- list_del(©->copies);
- spin_unlock(©->cp_clp->async_lock);
+ if (copy->cp_clp) {
+ spin_lock(©->cp_clp->async_lock);
+ if (!list_empty(©->copies))
+ list_del_init(©->copies);
+ spin_unlock(©->cp_clp->async_lock);
+ }
nfs4_put_copy(copy);
}
@@ -1797,12 +1800,13 @@ nfsd4_copy(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
async_copy = kzalloc(sizeof(struct nfsd4_copy), GFP_KERNEL);
if (!async_copy)
goto out_err;
+ INIT_LIST_HEAD(&async_copy->copies);
+ refcount_set(&async_copy->refcount, 1);
async_copy->cp_src = kmalloc(sizeof(*async_copy->cp_src), GFP_KERNEL);
if (!async_copy->cp_src)
goto out_err;
if (!nfs4_init_copy_state(nn, copy))
goto out_err;
- refcount_set(&async_copy->refcount, 1);
memcpy(©->cp_res.cb_stateid, ©->cp_stateid.cs_stid,
sizeof(copy->cp_res.cb_stateid));
dup_copy_fields(copy, async_copy);
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 2247d107da90b..7c1b1247dc407 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -991,7 +991,6 @@ static int nfs4_init_cp_state(struct nfsd_net *nn, copy_stateid_t *stid,
stid->cs_stid.si_opaque.so_clid.cl_boot = (u32)nn->boot_time;
stid->cs_stid.si_opaque.so_clid.cl_id = nn->s2s_cp_cl_id;
- stid->cs_type = cs_type;
idr_preload(GFP_KERNEL);
spin_lock(&nn->s2s_cp_lock);
@@ -1002,6 +1001,7 @@ static int nfs4_init_cp_state(struct nfsd_net *nn, copy_stateid_t *stid,
idr_preload_end();
if (new_id < 0)
return 0;
+ stid->cs_type = cs_type;
return 1;
}
@@ -1035,7 +1035,8 @@ void nfs4_free_copy_state(struct nfsd4_copy *copy)
{
struct nfsd_net *nn;
- WARN_ON_ONCE(copy->cp_stateid.cs_type != NFS4_COPY_STID);
+ if (copy->cp_stateid.cs_type != NFS4_COPY_STID)
+ return;
nn = net_generic(copy->cp_clp->net, nfsd_net_id);
spin_lock(&nn->s2s_cp_lock);
idr_remove(&nn->s2s_cp_stateids,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 378/885] nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (376 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 377/885] NFSD: fix problems with cleanup on errors in nfsd4_copy Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 379/885] nfsd: dont fsync nfsd_files on last close Greg Kroah-Hartman
` (509 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, 張智諺,
Jeff Layton, Dai Ngo, Chuck Lever, Sasha Levin
From: Jeff Layton <jlayton@kernel.org>
[ Upstream commit dcd779dc46540e174a6ac8d52fbed23593407317 ]
The nested if statements here make no sense, as you can never reach
"else" branch in the nested statement. Fix the error handling for
when there is a courtesy client that holds a conflicting deny mode.
Fixes: 3d6942715180 ("NFSD: add support for share reservation conflict to courteous server")
Reported-by: 張智諺 <cc85nod@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs4state.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 7c1b1247dc407..a768b8701b44e 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -5258,16 +5258,17 @@ nfs4_upgrade_open(struct svc_rqst *rqstp, struct nfs4_file *fp,
/* test and set deny mode */
spin_lock(&fp->fi_lock);
status = nfs4_file_check_deny(fp, open->op_share_deny);
- if (status == nfs_ok) {
- if (status != nfserr_share_denied) {
- set_deny(open->op_share_deny, stp);
- fp->fi_share_deny |=
- (open->op_share_deny & NFS4_SHARE_DENY_BOTH);
- } else {
- if (nfs4_resolve_deny_conflicts_locked(fp, false,
- stp, open->op_share_deny, false))
- status = nfserr_jukebox;
- }
+ switch (status) {
+ case nfs_ok:
+ set_deny(open->op_share_deny, stp);
+ fp->fi_share_deny |=
+ (open->op_share_deny & NFS4_SHARE_DENY_BOTH);
+ break;
+ case nfserr_share_denied:
+ if (nfs4_resolve_deny_conflicts_locked(fp, false,
+ stp, open->op_share_deny, false))
+ status = nfserr_jukebox;
+ break;
}
spin_unlock(&fp->fi_lock);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 379/885] nfsd: dont fsync nfsd_files on last close
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (377 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 378/885] nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 380/885] NFSD: copy the whole verifier in nfsd_copy_write_verifier Greg Kroah-Hartman
` (508 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jeff Layton, Chuck Lever,
Sasha Levin, Pierguido Lambri
From: Jeff Layton <jlayton@kernel.org>
[ Upstream commit 4c475eee02375ade6e864f1db16976ba0d96a0a2 ]
Most of the time, NFSv4 clients issue a COMMIT before the final CLOSE of
an open stateid, so with NFSv4, the fsync in the nfsd_file_free path is
usually a no-op and doesn't block.
We have a customer running knfsd over very slow storage (XFS over Ceph
RBD). They were using the "async" export option because performance was
more important than data integrity for this application. That export
option turns NFSv4 COMMIT calls into no-ops. Due to the fsync in this
codepath however, their final CLOSE calls would still stall (since a
CLOSE effectively became a COMMIT).
I think this fsync is not strictly necessary. We only use that result to
reset the write verifier. Instead of fsync'ing all of the data when we
free an nfsd_file, we can just check for writeback errors when one is
acquired and when it is freed.
If the client never comes back, then it'll never see the error anyway
and there is no point in resetting it. If an error occurs after the
nfsd_file is removed from the cache but before the inode is evicted,
then it will reset the write verifier on the next nfsd_file_acquire,
(since there will be an unseen error).
The only exception here is if something else opens and fsyncs the file
during that window. Given that local applications work with this
limitation today, I don't see that as an issue.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2166658
Fixes: ac3a2585f018 ("nfsd: rework refcounting in filecache")
Reported-and-tested-by: Pierguido Lambri <plambri@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/filecache.c | 44 ++++++++++++--------------------------------
fs/nfsd/trace.h | 31 -------------------------------
2 files changed, 12 insertions(+), 63 deletions(-)
diff --git a/fs/nfsd/filecache.c b/fs/nfsd/filecache.c
index 142b3c928f76e..5cb8cce153a57 100644
--- a/fs/nfsd/filecache.c
+++ b/fs/nfsd/filecache.c
@@ -309,37 +309,27 @@ nfsd_file_alloc(struct nfsd_file_lookup_key *key, unsigned int may)
return nf;
}
+/**
+ * nfsd_file_check_write_error - check for writeback errors on a file
+ * @nf: nfsd_file to check for writeback errors
+ *
+ * Check whether a nfsd_file has an unseen error. Reset the write
+ * verifier if so.
+ */
static void
-nfsd_file_fsync(struct nfsd_file *nf)
-{
- struct file *file = nf->nf_file;
- int ret;
-
- if (!file || !(file->f_mode & FMODE_WRITE))
- return;
- ret = vfs_fsync(file, 1);
- trace_nfsd_file_fsync(nf, ret);
- if (ret)
- nfsd_reset_write_verifier(net_generic(nf->nf_net, nfsd_net_id));
-}
-
-static int
nfsd_file_check_write_error(struct nfsd_file *nf)
{
struct file *file = nf->nf_file;
- if (!file || !(file->f_mode & FMODE_WRITE))
- return 0;
- return filemap_check_wb_err(file->f_mapping, READ_ONCE(file->f_wb_err));
+ if ((file->f_mode & FMODE_WRITE) &&
+ filemap_check_wb_err(file->f_mapping, READ_ONCE(file->f_wb_err)))
+ nfsd_reset_write_verifier(net_generic(nf->nf_net, nfsd_net_id));
}
static void
nfsd_file_hash_remove(struct nfsd_file *nf)
{
trace_nfsd_file_unhash(nf);
-
- if (nfsd_file_check_write_error(nf))
- nfsd_reset_write_verifier(net_generic(nf->nf_net, nfsd_net_id));
rhashtable_remove_fast(&nfsd_file_rhash_tbl, &nf->nf_rhash,
nfsd_file_rhash_params);
}
@@ -365,23 +355,12 @@ nfsd_file_free(struct nfsd_file *nf)
this_cpu_add(nfsd_file_total_age, age);
nfsd_file_unhash(nf);
-
- /*
- * We call fsync here in order to catch writeback errors. It's not
- * strictly required by the protocol, but an nfsd_file could get
- * evicted from the cache before a COMMIT comes in. If another
- * task were to open that file in the interim and scrape the error,
- * then the client may never see it. By calling fsync here, we ensure
- * that writeback happens before the entry is freed, and that any
- * errors reported result in the write verifier changing.
- */
- nfsd_file_fsync(nf);
-
if (nf->nf_mark)
nfsd_file_mark_put(nf->nf_mark);
if (nf->nf_file) {
get_file(nf->nf_file);
filp_close(nf->nf_file, NULL);
+ nfsd_file_check_write_error(nf);
fput(nf->nf_file);
}
@@ -1136,6 +1115,7 @@ nfsd_file_do_acquire(struct svc_rqst *rqstp, struct svc_fh *fhp,
out:
if (status == nfs_ok) {
this_cpu_inc(nfsd_file_acquisitions);
+ nfsd_file_check_write_error(nf);
*pnf = nf;
} else {
if (refcount_dec_and_test(&nf->nf_ref))
diff --git a/fs/nfsd/trace.h b/fs/nfsd/trace.h
index 4eb4e1039c7f4..132335011ccae 100644
--- a/fs/nfsd/trace.h
+++ b/fs/nfsd/trace.h
@@ -1143,37 +1143,6 @@ TRACE_EVENT(nfsd_file_close,
)
);
-TRACE_EVENT(nfsd_file_fsync,
- TP_PROTO(
- const struct nfsd_file *nf,
- int ret
- ),
- TP_ARGS(nf, ret),
- TP_STRUCT__entry(
- __field(void *, nf_inode)
- __field(int, nf_ref)
- __field(int, ret)
- __field(unsigned long, nf_flags)
- __field(unsigned char, nf_may)
- __field(struct file *, nf_file)
- ),
- TP_fast_assign(
- __entry->nf_inode = nf->nf_inode;
- __entry->nf_ref = refcount_read(&nf->nf_ref);
- __entry->ret = ret;
- __entry->nf_flags = nf->nf_flags;
- __entry->nf_may = nf->nf_may;
- __entry->nf_file = nf->nf_file;
- ),
- TP_printk("inode=%p ref=%d flags=%s may=%s nf_file=%p ret=%d",
- __entry->nf_inode,
- __entry->nf_ref,
- show_nf_flags(__entry->nf_flags),
- show_nfsd_may_flags(__entry->nf_may),
- __entry->nf_file, __entry->ret
- )
-);
-
#include "cache.h"
TRACE_DEFINE_ENUM(RC_DROPIT);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 380/885] NFSD: copy the whole verifier in nfsd_copy_write_verifier
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (378 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 379/885] nfsd: dont fsync nfsd_files on last close Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 381/885] cifs: Fix lost destroy smbd connection when MR allocate failed Greg Kroah-Hartman
` (507 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jeff Layton, Chuck Lever, Sasha Levin
From: Chuck Lever <chuck.lever@oracle.com>
[ Upstream commit 90d2175572470ba7f55da8447c72ddd4942923c4 ]
Currently, we're only memcpy'ing the first __be32. Ensure we copy into
both words.
Fixes: 91d2e9b56cf5 ("NFSD: Clean up the nfsd_net::nfssvc_boot field")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfssvc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 8b1afde192118..6b20f285f3ca6 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -357,7 +357,7 @@ void nfsd_copy_write_verifier(__be32 verf[2], struct nfsd_net *nn)
do {
read_seqbegin_or_lock(&nn->writeverf_lock, &seq);
- memcpy(verf, nn->writeverf, sizeof(*verf));
+ memcpy(verf, nn->writeverf, sizeof(nn->writeverf));
} while (need_seqretry(&nn->writeverf_lock, seq));
done_seqretry(&nn->writeverf_lock, seq);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 381/885] cifs: Fix lost destroy smbd connection when MR allocate failed
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (379 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 380/885] NFSD: copy the whole verifier in nfsd_copy_write_verifier Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 382/885] cifs: Fix warning and UAF when destroy the MR list Greg Kroah-Hartman
` (506 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Xiaoxu, Paulo Alcantara (SUSE),
David Howells, Tom Talpey, Steve French, Sasha Levin
From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[ Upstream commit e9d3401d95d62a9531082cd2453ed42f2740e3fd ]
If the MR allocate failed, the smb direct connection info is NULL,
then smbd_destroy() will directly return, then the connection info
will be leaked.
Let's set the smb direct connection info to the server before call
smbd_destroy().
Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/smbdirect.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c
index 8c816b25ce7c6..101dab87cad1a 100644
--- a/fs/cifs/smbdirect.c
+++ b/fs/cifs/smbdirect.c
@@ -1700,6 +1700,7 @@ static struct smbd_connection *_smbd_get_connection(
allocate_mr_failed:
/* At this point, need to a full transport shutdown */
+ server->smbd_conn = info;
smbd_destroy(server);
return NULL;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 382/885] cifs: Fix warning and UAF when destroy the MR list
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (380 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 381/885] cifs: Fix lost destroy smbd connection when MR allocate failed Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 383/885] cifs: use tcon allocation functions even for dummy tcon Greg Kroah-Hartman
` (505 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paulo Alcantara (SUSE),
Tom Talpey, Zhang Xiaoxu, Steve French, Sasha Levin
From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[ Upstream commit 3e161c2791f8e661eed24a2c624087084d910215 ]
If the MR allocate failed, the MR recovery work not initialized
and list not cleared. Then will be warning and UAF when release
the MR:
WARNING: CPU: 4 PID: 824 at kernel/workqueue.c:3066 __flush_work.isra.0+0xf7/0x110
CPU: 4 PID: 824 Comm: mount.cifs Not tainted 6.1.0-rc5+ #82
RIP: 0010:__flush_work.isra.0+0xf7/0x110
Call Trace:
<TASK>
__cancel_work_timer+0x2ba/0x2e0
smbd_destroy+0x4e1/0x990
_smbd_get_connection+0x1cbd/0x2110
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
BUG: KASAN: use-after-free in smbd_destroy+0x4fc/0x990
Read of size 8 at addr ffff88810b156a08 by task mount.cifs/824
CPU: 4 PID: 824 Comm: mount.cifs Tainted: G W 6.1.0-rc5+ #82
Call Trace:
dump_stack_lvl+0x34/0x44
print_report+0x171/0x472
kasan_report+0xad/0x130
smbd_destroy+0x4fc/0x990
_smbd_get_connection+0x1cbd/0x2110
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Allocated by task 824:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7a/0x90
_smbd_get_connection+0x1b6f/0x2110
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 824:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x143/0x1b0
__kmem_cache_free+0xc8/0x330
_smbd_get_connection+0x1c6a/0x2110
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Let's initialize the MR recovery work before MR allocate to prevent
the warning, remove the MRs from the list to prevent the UAF.
Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration")
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/smbdirect.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c
index 101dab87cad1a..cf923f211c512 100644
--- a/fs/cifs/smbdirect.c
+++ b/fs/cifs/smbdirect.c
@@ -2218,6 +2218,7 @@ static int allocate_mr_list(struct smbd_connection *info)
atomic_set(&info->mr_ready_count, 0);
atomic_set(&info->mr_used_count, 0);
init_waitqueue_head(&info->wait_for_mr_cleanup);
+ INIT_WORK(&info->mr_recovery_work, smbd_mr_recovery_work);
/* Allocate more MRs (2x) than hardware responder_resources */
for (i = 0; i < info->responder_resources * 2; i++) {
smbdirect_mr = kzalloc(sizeof(*smbdirect_mr), GFP_KERNEL);
@@ -2245,13 +2246,13 @@ static int allocate_mr_list(struct smbd_connection *info)
list_add_tail(&smbdirect_mr->list, &info->mr_list);
atomic_inc(&info->mr_ready_count);
}
- INIT_WORK(&info->mr_recovery_work, smbd_mr_recovery_work);
return 0;
out:
kfree(smbdirect_mr);
list_for_each_entry_safe(smbdirect_mr, tmp, &info->mr_list, list) {
+ list_del(&smbdirect_mr->list);
ib_dereg_mr(smbdirect_mr->mr);
kfree(smbdirect_mr->sgl);
kfree(smbdirect_mr);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 383/885] cifs: use tcon allocation functions even for dummy tcon
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (381 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 382/885] cifs: Fix warning and UAF when destroy the MR list Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 384/885] gfs2: jdata writepage fix Greg Kroah-Hartman
` (504 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shyam Prasad N,
Paulo Alcantara (SUSE),
Steve French, Sasha Levin
From: Shyam Prasad N <sprasad@microsoft.com>
[ Upstream commit df57109bd50b9ed6911f3c2aa914189fe4c1fe2c ]
In smb2_reconnect_server, we allocate a dummy tcon for
calling reconnect for just the session. This should be
allocated using tconInfoAlloc, and not kmalloc.
Fixes: 3663c9045f51 ("cifs: check reconnects for channels of active tcons too")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/smb2pdu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index 2c9ffa921e6f6..3b93680a319e4 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -3898,7 +3898,7 @@ void smb2_reconnect_server(struct work_struct *work)
goto done;
/* allocate a dummy tcon struct used for reconnect */
- tcon = kzalloc(sizeof(struct cifs_tcon), GFP_KERNEL);
+ tcon = tconInfoAlloc();
if (!tcon) {
resched = true;
list_for_each_entry_safe(ses, ses2, &tmp_ses_list, rlist) {
@@ -3921,7 +3921,7 @@ void smb2_reconnect_server(struct work_struct *work)
list_del_init(&ses->rlist);
cifs_put_smb_ses(ses);
}
- kfree(tcon);
+ tconInfoFree(tcon);
done:
cifs_dbg(FYI, "Reconnecting tcons and channels finished\n");
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 384/885] gfs2: jdata writepage fix
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (382 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 383/885] cifs: use tcon allocation functions even for dummy tcon Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 385/885] perf llvm: Fix inadvertent file creation Greg Kroah-Hartman
` (503 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Andreas Gruenbacher, Sasha Levin
From: Andreas Gruenbacher <agruenba@redhat.com>
[ Upstream commit cbb60951ce18c9b6e91d2eb97deb41d8ff616622 ]
The ->writepage() and ->writepages() operations are supposed to write
entire pages. However, on filesystems with a block size smaller than
PAGE_SIZE, __gfs2_jdata_writepage() only adds the first block to the
current transaction instead of adding the entire page. Fix that.
Fixes: 18ec7d5c3f43 ("[GFS2] Make journaled data files identical to normal files on disk")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/gfs2/aops.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index e782b4f1d1043..2f04c0ff7470b 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -127,7 +127,6 @@ static int __gfs2_jdata_writepage(struct page *page, struct writeback_control *w
{
struct inode *inode = page->mapping->host;
struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_sbd *sdp = GFS2_SB(inode);
if (PageChecked(page)) {
ClearPageChecked(page);
@@ -135,7 +134,7 @@ static int __gfs2_jdata_writepage(struct page *page, struct writeback_control *w
create_empty_buffers(page, inode->i_sb->s_blocksize,
BIT(BH_Dirty)|BIT(BH_Uptodate));
}
- gfs2_page_add_databufs(ip, page, 0, sdp->sd_vfs->s_blocksize);
+ gfs2_page_add_databufs(ip, page, 0, PAGE_SIZE);
}
return gfs2_write_jdata_page(page, wbc);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 385/885] perf llvm: Fix inadvertent file creation
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (383 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 384/885] gfs2: jdata writepage fix Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 386/885] leds: led-core: Fix refcount leak in of_led_get() Greg Kroah-Hartman
` (502 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ian Rogers, Alexander Shishkin,
Andrii Nakryiko, bpf, Ingo Molnar, Jiri Olsa, llvm, Mark Rutland,
Namhyung Kim, Nathan Chancellor, Nick Desaulniers,
Peter Zijlstra, Tom Rix, Arnaldo Carvalho de Melo, Sasha Levin
From: Ian Rogers <irogers@google.com>
[ Upstream commit 9f19aab47ced012eddef1e2bc96007efc7713b61 ]
The LLVM template is first echo-ed into command_out and then
command_out executed. The echo surrounds the template with double
quotes, however, the template itself may contain quotes. This is
generally innocuous but in tools/perf/tests/bpf-script-test-prologue.c
we see:
...
SEC("func=null_lseek file->f_mode offset orig")
...
where the first double quote ends the double quote of the echo, then
the > redirects output into a file called f_mode.
To avoid this inadvertent behavior substitute redirects and similar
characters to be ASCII control codes, then substitute the output in
the echo back again.
Fixes: 5eab5a7ee032acaa ("perf llvm: Display eBPF compiling command in debug output")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: llvm@lists.linux.dev
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230105082609.344538-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/util/llvm-utils.c | 25 ++++++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/tools/perf/util/llvm-utils.c b/tools/perf/util/llvm-utils.c
index 2dc7970074196..a9e18bb1601c7 100644
--- a/tools/perf/util/llvm-utils.c
+++ b/tools/perf/util/llvm-utils.c
@@ -531,14 +531,37 @@ int llvm__compile_bpf(const char *path, void **p_obj_buf,
pr_debug("llvm compiling command template: %s\n", template);
+ /*
+ * Below, substitute control characters for values that can cause the
+ * echo to misbehave, then substitute the values back.
+ */
err = -ENOMEM;
- if (asprintf(&command_echo, "echo -n \"%s\"", template) < 0)
+ if (asprintf(&command_echo, "echo -n \a%s\a", template) < 0)
goto errout;
+#define SWAP_CHAR(a, b) do { if (*p == a) *p = b; } while (0)
+ for (char *p = command_echo; *p; p++) {
+ SWAP_CHAR('<', '\001');
+ SWAP_CHAR('>', '\002');
+ SWAP_CHAR('"', '\003');
+ SWAP_CHAR('\'', '\004');
+ SWAP_CHAR('|', '\005');
+ SWAP_CHAR('&', '\006');
+ SWAP_CHAR('\a', '"');
+ }
err = read_from_pipe(command_echo, (void **) &command_out, NULL);
if (err)
goto errout;
+ for (char *p = command_out; *p; p++) {
+ SWAP_CHAR('\001', '<');
+ SWAP_CHAR('\002', '>');
+ SWAP_CHAR('\003', '"');
+ SWAP_CHAR('\004', '\'');
+ SWAP_CHAR('\005', '|');
+ SWAP_CHAR('\006', '&');
+ }
+#undef SWAP_CHAR
pr_debug("llvm compiling command : %s\n", command_out);
err = read_from_pipe(template, &obj_buf, &obj_buf_sz);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 386/885] leds: led-core: Fix refcount leak in of_led_get()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (384 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 385/885] perf llvm: Fix inadvertent file creation Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 387/885] leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest() Greg Kroah-Hartman
` (501 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Miaoqian Lin, Lee Jones, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit da1afe8e6099980fe1e2fd7436dca284af9d3f29 ]
class_find_device_by_of_node() calls class_find_device(), it will take
the reference, use the put_device() to drop the reference when not need
anymore.
Fixes: 699a8c7c4bd3 ("leds: Add of_led_get() and led_put()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221220121807.1543790-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/leds/led-class.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 7391d2cf1370a..aa39b2a48fdff 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -235,6 +235,7 @@ struct led_classdev *of_led_get(struct device_node *np, int index)
led_dev = class_find_device_by_of_node(leds_class, led_node);
of_node_put(led_node);
+ put_device(led_dev);
if (!led_dev)
return ERR_PTR(-EPROBE_DEFER);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 387/885] leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (385 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 386/885] leds: led-core: Fix refcount leak in of_led_get() Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 388/885] leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver Greg Kroah-Hartman
` (500 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernel test robot, Andy Shevchenko,
Vincent Knecht, Lee Jones, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit a82c7cf803d98751cd3ddb35828faad925d71982 ]
Clang complains that devm_add_action() takes a parameter with a wrong type:
warning: cast from 'void (*)(struct mutex *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
err = devm_add_action(dev, (void (*)(void *))mutex_destroy, &is31->lock);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
It appears that the commit e1af5c815586 ("leds: is31fl319x: Fix devm vs.
non-devm ordering") missed two things:
- whilst the commit mentions devm_add_action_or_reset() the actual change
utilised devm_add_action() call by mistake
- strictly speaking the parameter is not compatible by type
Fix both issues by switching to devm_add_action_or_reset() and adding a
wrapper for mutex_destroy() call.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e1af5c815586 ("leds: is31fl319x: Fix devm vs. non-devm ordering")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221228093238.82713-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/leds/leds-is31fl319x.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/leds/leds-is31fl319x.c b/drivers/leds/leds-is31fl319x.c
index b2f4c4ec7c567..7c908414ac7e0 100644
--- a/drivers/leds/leds-is31fl319x.c
+++ b/drivers/leds/leds-is31fl319x.c
@@ -495,6 +495,11 @@ static inline int is31fl3196_db_to_gain(u32 dezibel)
return dezibel / IS31FL3196_AUDIO_GAIN_DB_STEP;
}
+static void is31f1319x_mutex_destroy(void *lock)
+{
+ mutex_destroy(lock);
+}
+
static int is31fl319x_probe(struct i2c_client *client)
{
struct is31fl319x_chip *is31;
@@ -511,7 +516,7 @@ static int is31fl319x_probe(struct i2c_client *client)
return -ENOMEM;
mutex_init(&is31->lock);
- err = devm_add_action(dev, (void (*)(void *))mutex_destroy, &is31->lock);
+ err = devm_add_action_or_reset(dev, is31f1319x_mutex_destroy, &is31->lock);
if (err)
return err;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 388/885] leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (386 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 387/885] leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest() Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 389/885] tools/tracing/rtla: osnoise_hist: use total duration for average calculation Greg Kroah-Hartman
` (499 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Henning Schild, Andy Shevchenko,
Lee Jones, Sasha Levin
From: Henning Schild <henning.schild@siemens.com>
[ Upstream commit c64964ebee2a415384385205950ee7a05f78451e ]
If we register a "leds-gpio" platform device for GPIO pins that do not
exist we get a -EPROBE_DEFER and the probe will be tried again later.
If there is no driver to provide that pin we will poll forever and also
create a lot of log messages.
So check if that GPIO driver is configured, if so it will come up
eventually. If not, we exit our probe function early and do not even
bother registering the "leds-gpio". This method was chosen over "Kconfig
depends" since this way we can add support for more devices and GPIO
backends more easily without "depends":ing on all GPIO backends.
Fixes: a6c80bec3c93 ("leds: simatic-ipc-leds-gpio: Add GPIO version of Siemens driver")
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221007153323.1326-1-henning.schild@siemens.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/leds/simple/simatic-ipc-leds-gpio.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/leds/simple/simatic-ipc-leds-gpio.c b/drivers/leds/simple/simatic-ipc-leds-gpio.c
index 07f0d79d604d4..e8d329b5a68c3 100644
--- a/drivers/leds/simple/simatic-ipc-leds-gpio.c
+++ b/drivers/leds/simple/simatic-ipc-leds-gpio.c
@@ -77,6 +77,8 @@ static int simatic_ipc_leds_gpio_probe(struct platform_device *pdev)
switch (plat->devmode) {
case SIMATIC_IPC_DEVICE_127E:
+ if (!IS_ENABLED(CONFIG_PINCTRL_BROXTON))
+ return -ENODEV;
simatic_ipc_led_gpio_table = &simatic_ipc_led_gpio_table_127e;
break;
case SIMATIC_IPC_DEVICE_227G:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 389/885] tools/tracing/rtla: osnoise_hist: use total duration for average calculation
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (387 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 388/885] leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 390/885] perf inject: Use perf_data__read() for auxtrace Greg Kroah-Hartman
` (498 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andreas Ziegler,
Daniel Bristot de Oliveira, Steven Rostedt (Google),
Sasha Levin
From: Andreas Ziegler <br015@umbiko.net>
[ Upstream commit fe137a4fe0e77eb95396cfc5c3dd7df404421aa4 ]
Sampled durations must be weighted by observed quantity, to arrive at a correct
average duration value.
Perform calculation of total duration by summing (duration * count).
Link: https://lkml.kernel.org/r/20230103103400.275566-2-br015@umbiko.net
Fixes: 829a6c0b5698 ("rtla/osnoise: Add the hist mode")
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/tracing/rtla/src/osnoise_hist.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/tracing/rtla/src/osnoise_hist.c b/tools/tracing/rtla/src/osnoise_hist.c
index 5d7ea479ac89f..fe34452fc4ec0 100644
--- a/tools/tracing/rtla/src/osnoise_hist.c
+++ b/tools/tracing/rtla/src/osnoise_hist.c
@@ -121,6 +121,7 @@ static void osnoise_hist_update_multiple(struct osnoise_tool *tool, int cpu,
{
struct osnoise_hist_params *params = tool->params;
struct osnoise_hist_data *data = tool->data;
+ unsigned long long total_duration;
int entries = data->entries;
int bucket;
int *hist;
@@ -131,10 +132,12 @@ static void osnoise_hist_update_multiple(struct osnoise_tool *tool, int cpu,
if (data->bucket_size)
bucket = duration / data->bucket_size;
+ total_duration = duration * count;
+
hist = data->hist[cpu].samples;
data->hist[cpu].count += count;
update_min(&data->hist[cpu].min_sample, &duration);
- update_sum(&data->hist[cpu].sum_sample, &duration);
+ update_sum(&data->hist[cpu].sum_sample, &total_duration);
update_max(&data->hist[cpu].max_sample, &duration);
if (bucket < entries)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 390/885] perf inject: Use perf_data__read() for auxtrace
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (388 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 389/885] tools/tracing/rtla: osnoise_hist: use total duration for average calculation Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 391/885] perf intel-pt: Do not try to queue auxtrace data on pipe Greg Kroah-Hartman
` (497 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Adrian Hunter, James Clark,
Namhyung Kim, Ian Rogers, Ingo Molnar, Jiri Olsa, Leo Yan,
Peter Zijlstra, Stephane Eranian, Arnaldo Carvalho de Melo,
Sasha Levin
From: Namhyung Kim <namhyung@kernel.org>
[ Upstream commit 1746212daeba95e9ae1639227dc0c3591d41deeb ]
In copy_bytes(), it reads the data from the (input) fd and writes it to
the output file. But it does with the read(2) unconditionally which
caused a problem of mixing buffered vs unbuffered I/O together.
You can see the problem when using pipes.
$ perf record -e intel_pt// -o- true | perf inject -b > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
0x45c0 [0x30]: failed to process type: 71
It should use perf_data__read() to honor the 'use_stdio' setting.
Fixes: 601366678c93618f ("perf data: Allow to use stdio functions for pipe mode")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/builtin-inject.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/perf/builtin-inject.c b/tools/perf/builtin-inject.c
index e254f18986f7c..e2ce5f294cbd4 100644
--- a/tools/perf/builtin-inject.c
+++ b/tools/perf/builtin-inject.c
@@ -215,14 +215,14 @@ static int perf_event__repipe_event_update(struct perf_tool *tool,
#ifdef HAVE_AUXTRACE_SUPPORT
-static int copy_bytes(struct perf_inject *inject, int fd, off_t size)
+static int copy_bytes(struct perf_inject *inject, struct perf_data *data, off_t size)
{
char buf[4096];
ssize_t ssz;
int ret;
while (size > 0) {
- ssz = read(fd, buf, min(size, (off_t)sizeof(buf)));
+ ssz = perf_data__read(data, buf, min(size, (off_t)sizeof(buf)));
if (ssz < 0)
return -errno;
ret = output_bytes(inject, buf, ssz);
@@ -260,7 +260,7 @@ static s64 perf_event__repipe_auxtrace(struct perf_session *session,
ret = output_bytes(inject, event, event->header.size);
if (ret < 0)
return ret;
- ret = copy_bytes(inject, perf_data__fd(session->data),
+ ret = copy_bytes(inject, session->data,
event->auxtrace.size);
} else {
ret = output_bytes(inject, event,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 391/885] perf intel-pt: Do not try to queue auxtrace data on pipe
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (389 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 390/885] perf inject: Use perf_data__read() for auxtrace Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` Greg Kroah-Hartman
` (496 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Adrian Hunter, James Clark,
Namhyung Kim, Ian Rogers, Ingo Molnar, Jiri Olsa, Leo Yan,
Peter Zijlstra, Stephane Eranian, Arnaldo Carvalho de Melo,
Sasha Levin
From: Namhyung Kim <namhyung@kernel.org>
[ Upstream commit aeb802f872a7c42e4381f36041e77d1745908255 ]
When it processes AUXTRACE_INFO, it calls to auxtrace_queue_data() to
collect AUXTRACE data first. That won't work with pipe since it needs
lseek() to read the scattered aux data.
$ perf record -o- -e intel_pt// true | perf report -i- --itrace=i100
# To display the perf.data header info, please use --header/--header-only options.
#
0x4118 [0xa0]: failed to process type: 70
Error:
failed to process sample
For the pipe mode, it can handle the aux data as it gets. But there's
no guarantee it can get the aux data in time. So the following warning
will be shown at the beginning:
WARNING: Intel PT with pipe mode is not recommended.
The output cannot relied upon. In particular,
time stamps and the order of events may be incorrect.
Fixes: dbd134322e74f19d ("perf intel-pt: Add support for decoding AUX area samples")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/Documentation/perf-intel-pt.txt | 30 ++++++++++++++++++++++
tools/perf/util/auxtrace.c | 3 +++
tools/perf/util/intel-pt.c | 6 +++++
3 files changed, 39 insertions(+)
diff --git a/tools/perf/Documentation/perf-intel-pt.txt b/tools/perf/Documentation/perf-intel-pt.txt
index 92464a5d7eafd..a764367fcb89b 100644
--- a/tools/perf/Documentation/perf-intel-pt.txt
+++ b/tools/perf/Documentation/perf-intel-pt.txt
@@ -1813,6 +1813,36 @@ Can be compiled and traced:
$
+Pipe mode
+---------
+Pipe mode is a problem for Intel PT and possibly other auxtrace users.
+It's not recommended to use a pipe as data output with Intel PT because
+of the following reason.
+
+Essentially the auxtrace buffers do not behave like the regular perf
+event buffers. That is because the head and tail are updated by
+software, but in the auxtrace case the data is written by hardware.
+So the head and tail do not get updated as data is written.
+
+In the Intel PT case, the head and tail are updated only when the trace
+is disabled by software, for example:
+ - full-trace, system wide : when buffer passes watermark
+ - full-trace, not system-wide : when buffer passes watermark or
+ context switches
+ - snapshot mode : as above but also when a snapshot is made
+ - sample mode : as above but also when a sample is made
+
+That means finished-round ordering doesn't work. An auxtrace buffer
+can turn up that has data that extends back in time, possibly to the
+very beginning of tracing.
+
+For a perf.data file, that problem is solved by going through the trace
+and queuing up the auxtrace buffers in advance.
+
+For pipe mode, the order of events and timestamps can presumably
+be messed up.
+
+
EXAMPLE
-------
diff --git a/tools/perf/util/auxtrace.c b/tools/perf/util/auxtrace.c
index 47062f459ccd6..6e60b6f06ab05 100644
--- a/tools/perf/util/auxtrace.c
+++ b/tools/perf/util/auxtrace.c
@@ -1132,6 +1132,9 @@ int auxtrace_queue_data(struct perf_session *session, bool samples, bool events)
if (auxtrace__dont_decode(session))
return 0;
+ if (perf_data__is_pipe(session->data))
+ return 0;
+
if (!session->auxtrace || !session->auxtrace->queue_data)
return -EINVAL;
diff --git a/tools/perf/util/intel-pt.c b/tools/perf/util/intel-pt.c
index e3548ddef2545..d1338a4071268 100644
--- a/tools/perf/util/intel-pt.c
+++ b/tools/perf/util/intel-pt.c
@@ -4374,6 +4374,12 @@ int intel_pt_process_auxtrace_info(union perf_event *event,
intel_pt_setup_pebs_events(pt);
+ if (perf_data__is_pipe(session->data)) {
+ pr_warning("WARNING: Intel PT with pipe mode is not recommended.\n"
+ " The output cannot relied upon. In particular,\n"
+ " timestamps and the order of events may be incorrect.\n");
+ }
+
if (pt->sampling_mode || list_empty(&session->auxtrace_index))
err = auxtrace_queue_data(session, true, true);
else
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 392/885] perf test bpf: Skip test if kernel-debuginfo is not present
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 002/885] HID: asus: use spinlock to safely schedule workers Greg Kroah-Hartman
` (886 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Athira Rajeev, Andi Kleen,
Disha Goel, Ian Rogers, James Clark, Jiri Olsa, Kajol Jain,
Madhavan Srinivasan, Michael Ellerman, Nageswara R Sastry,
Namhyung Kim, Wang Nan, linuxppc-dev, Arnaldo Carvalho de Melo,
Sasha Levin
From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[ Upstream commit 34266f904abd45731bdade2e92d0536c092ee9bc ]
Perf BPF filter test fails in environment where "kernel-debuginfo"
is not installed.
Test failure logs:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : FAILED!
<<>>
Enabling verbose option provided debug logs, which says debuginfo
needs to be installed. Snippet of verbose logs:
<<>>
42.3: BPF prologue generation :
--- start ---
test child forked, pid 28218
<<>>
Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo
package.
bpf_probe: failed to convert perf probe events
Failed to add events selected by BPF
test child finished with -1
---- end ----
BPF filter subtest 3: FAILED!
<<>>
Here the subtest "BPF prologue generation" failed and logs shows
debuginfo is needed. After installing kernel-debuginfo package, testcase
passes.
The "BPF prologue generation" subtest failed because, the do_test()
returns TEST_FAIL without checking the error type returned by
parse_events_load_bpf_obj().
parse_events_load_bpf_obj() can also return error of type -ENODATA
incase kernel-debuginfo package is not installed. Fix this by adding
check for -ENODATA error.
Test result after the patch changes:
Test failure logs:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Skip (clang/debuginfo isn't installed or environment missing BPF support)
<<>>
Fixes: ba1fae431e74bb42 ("perf test: Add 'perf test BPF'")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/linux-perf-users/Y7bIk77mdE4j8Jyi@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/tests/bpf.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/tools/perf/tests/bpf.c b/tools/perf/tests/bpf.c
index 17c023823713d..6a4235a9cf57e 100644
--- a/tools/perf/tests/bpf.c
+++ b/tools/perf/tests/bpf.c
@@ -126,6 +126,10 @@ static int do_test(struct bpf_object *obj, int (*func)(void),
err = parse_events_load_bpf_obj(&parse_state, &parse_state.list, obj, NULL);
parse_events_error__exit(&parse_error);
+ if (err == -ENODATA) {
+ pr_debug("Failed to add events selected by BPF, debuginfo package not installed\n");
+ return TEST_SKIP;
+ }
if (err || list_empty(&parse_state.list)) {
pr_debug("Failed to add events selected by BPF\n");
return TEST_FAIL;
@@ -368,7 +372,7 @@ static struct test_case bpf_tests[] = {
"clang isn't installed or environment missing BPF support"),
#ifdef HAVE_BPF_PROLOGUE
TEST_CASE_REASON("BPF prologue generation", bpf_prologue_test,
- "clang isn't installed or environment missing BPF support"),
+ "clang/debuginfo isn't installed or environment missing BPF support"),
#else
TEST_CASE_REASON("BPF prologue generation", bpf_prologue_test, "not compiled in"),
#endif
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 392/885] perf test bpf: Skip test if kernel-debuginfo is not present
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
0 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Sasha Levin, Ian Rogers, Andi Kleen, Nageswara R Sastry,
Greg Kroah-Hartman, linuxppc-dev, patches,
Arnaldo Carvalho de Melo, Athira Rajeev, James Clark, Jiri Olsa,
Kajol Jain, Namhyung Kim, Wang Nan, Disha Goel,
Madhavan Srinivasan
From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[ Upstream commit 34266f904abd45731bdade2e92d0536c092ee9bc ]
Perf BPF filter test fails in environment where "kernel-debuginfo"
is not installed.
Test failure logs:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : FAILED!
<<>>
Enabling verbose option provided debug logs, which says debuginfo
needs to be installed. Snippet of verbose logs:
<<>>
42.3: BPF prologue generation :
--- start ---
test child forked, pid 28218
<<>>
Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo
package.
bpf_probe: failed to convert perf probe events
Failed to add events selected by BPF
test child finished with -1
---- end ----
BPF filter subtest 3: FAILED!
<<>>
Here the subtest "BPF prologue generation" failed and logs shows
debuginfo is needed. After installing kernel-debuginfo package, testcase
passes.
The "BPF prologue generation" subtest failed because, the do_test()
returns TEST_FAIL without checking the error type returned by
parse_events_load_bpf_obj().
parse_events_load_bpf_obj() can also return error of type -ENODATA
incase kernel-debuginfo package is not installed. Fix this by adding
check for -ENODATA error.
Test result after the patch changes:
Test failure logs:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Skip (clang/debuginfo isn't installed or environment missing BPF support)
<<>>
Fixes: ba1fae431e74bb42 ("perf test: Add 'perf test BPF'")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/linux-perf-users/Y7bIk77mdE4j8Jyi@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/tests/bpf.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/tools/perf/tests/bpf.c b/tools/perf/tests/bpf.c
index 17c023823713d..6a4235a9cf57e 100644
--- a/tools/perf/tests/bpf.c
+++ b/tools/perf/tests/bpf.c
@@ -126,6 +126,10 @@ static int do_test(struct bpf_object *obj, int (*func)(void),
err = parse_events_load_bpf_obj(&parse_state, &parse_state.list, obj, NULL);
parse_events_error__exit(&parse_error);
+ if (err == -ENODATA) {
+ pr_debug("Failed to add events selected by BPF, debuginfo package not installed\n");
+ return TEST_SKIP;
+ }
if (err || list_empty(&parse_state.list)) {
pr_debug("Failed to add events selected by BPF\n");
return TEST_FAIL;
@@ -368,7 +372,7 @@ static struct test_case bpf_tests[] = {
"clang isn't installed or environment missing BPF support"),
#ifdef HAVE_BPF_PROLOGUE
TEST_CASE_REASON("BPF prologue generation", bpf_prologue_test,
- "clang isn't installed or environment missing BPF support"),
+ "clang/debuginfo isn't installed or environment missing BPF support"),
#else
TEST_CASE_REASON("BPF prologue generation", bpf_prologue_test, "not compiled in"),
#endif
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 393/885] perf tools: Fix auto-complete on aarch64
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 002/885] HID: asus: use spinlock to safely schedule workers Greg Kroah-Hartman
` (886 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, James Clark, Yicong Yang,
Alexander Shishkin, Ingo Molnar, Jin Yao, Jiri Olsa,
Mark Rutland, Namhyung Kim, Peter Zijlstra, linux-arm-kernel,
linuxarm, prime.zeng, Arnaldo Carvalho de Melo, Sasha Levin
From: Yicong Yang <yangyicong@hisilicon.com>
[ Upstream commit ffd1240e8f0814262ceb957dbe961f6e0aef1e7a ]
On aarch64 CPU related events are not under event_source/devices/cpu/events,
they're under event_source/devices/armv8_pmuv3_0/events on my machine.
Using current auto-complete script will generate below error:
[root@localhost bin]# perf stat -e
ls: cannot access '/sys/bus/event_source/devices/cpu/events': No such file or directory
Fix this by not testing /sys/bus/event_source/devices/cpu/events on
aarch64 machine.
Fixes: 74cd5815d9af6e6c ("perf tool: Improve bash command line auto-complete for multiple events with comma")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Cc: prime.zeng@hisilicon.com
Link: https://lore.kernel.org/r/20230207035057.43394-1-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/perf-completion.sh | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/tools/perf/perf-completion.sh b/tools/perf/perf-completion.sh
index fdf75d45efff7..978249d7868c2 100644
--- a/tools/perf/perf-completion.sh
+++ b/tools/perf/perf-completion.sh
@@ -165,7 +165,12 @@ __perf_main ()
local cur1=${COMP_WORDS[COMP_CWORD]}
local raw_evts=$($cmd list --raw-dump)
- local arr s tmp result
+ local arr s tmp result cpu_evts
+
+ # aarch64 doesn't have /sys/bus/event_source/devices/cpu/events
+ if [[ `uname -m` != aarch64 ]]; then
+ cpu_evts=$(ls /sys/bus/event_source/devices/cpu/events)
+ fi
if [[ "$cur1" == */* && ${cur1#*/} =~ ^[A-Z] ]]; then
OLD_IFS="$IFS"
@@ -183,9 +188,9 @@ __perf_main ()
fi
done
- evts=${result}" "$(ls /sys/bus/event_source/devices/cpu/events)
+ evts=${result}" "${cpu_evts}
else
- evts=${raw_evts}" "$(ls /sys/bus/event_source/devices/cpu/events)
+ evts=${raw_evts}" "${cpu_evts}
fi
if [[ "$cur1" == , ]]; then
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 393/885] perf tools: Fix auto-complete on aarch64
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
0 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, James Clark, Yicong Yang,
Alexander Shishkin, Ingo Molnar, Jin Yao, Jiri Olsa,
Mark Rutland, Namhyung Kim, Peter Zijlstra, linux-arm-kernel,
linuxarm, prime.zeng, Arnaldo Carvalho de Melo, Sasha Levin
From: Yicong Yang <yangyicong@hisilicon.com>
[ Upstream commit ffd1240e8f0814262ceb957dbe961f6e0aef1e7a ]
On aarch64 CPU related events are not under event_source/devices/cpu/events,
they're under event_source/devices/armv8_pmuv3_0/events on my machine.
Using current auto-complete script will generate below error:
[root@localhost bin]# perf stat -e
ls: cannot access '/sys/bus/event_source/devices/cpu/events': No such file or directory
Fix this by not testing /sys/bus/event_source/devices/cpu/events on
aarch64 machine.
Fixes: 74cd5815d9af6e6c ("perf tool: Improve bash command line auto-complete for multiple events with comma")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Cc: prime.zeng@hisilicon.com
Link: https://lore.kernel.org/r/20230207035057.43394-1-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/perf-completion.sh | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/tools/perf/perf-completion.sh b/tools/perf/perf-completion.sh
index fdf75d45efff7..978249d7868c2 100644
--- a/tools/perf/perf-completion.sh
+++ b/tools/perf/perf-completion.sh
@@ -165,7 +165,12 @@ __perf_main ()
local cur1=${COMP_WORDS[COMP_CWORD]}
local raw_evts=$($cmd list --raw-dump)
- local arr s tmp result
+ local arr s tmp result cpu_evts
+
+ # aarch64 doesn't have /sys/bus/event_source/devices/cpu/events
+ if [[ `uname -m` != aarch64 ]]; then
+ cpu_evts=$(ls /sys/bus/event_source/devices/cpu/events)
+ fi
if [[ "$cur1" == */* && ${cur1#*/} =~ ^[A-Z] ]]; then
OLD_IFS="$IFS"
@@ -183,9 +188,9 @@ __perf_main ()
fi
done
- evts=${result}" "$(ls /sys/bus/event_source/devices/cpu/events)
+ evts=${result}" "${cpu_evts}
else
- evts=${raw_evts}" "$(ls /sys/bus/event_source/devices/cpu/events)
+ evts=${raw_evts}" "${cpu_evts}
fi
if [[ "$cur1" == , ]]; then
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 394/885] sparc: allow PM configs for sparc32 COMPILE_TEST
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (392 preceding siblings ...)
2023-03-07 16:55 ` Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 395/885] selftests: find echo binary to use -ne options Greg Kroah-Hartman
` (493 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Randy Dunlap, Arnd Bergmann,
Sam Ravnborg, David S. Miller, Kirill Tkhai, Andrew Morton,
Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 7be6a87c2473957090995b7eb541e31d57a2c801 ]
When doing randconfig builds for sparc32 with COMPILE_TEST, some
(non-Sparc) drivers cause kconfig warnings with the Kconfig symbols PM,
PM_GENERIC_DOMAINS, or PM_GENERIC_DOMAINS_OF.
This is due to arch/sparc/Kconfig not using the PM Kconfig for
Sparc32:
if SPARC64
source "kernel/power/Kconfig"
endif
Arnd suggested adding "|| COMPILE_TEST" to the conditional,
instead of trying to track down every driver that selects
any of these PM symbols.
Fixes the following kconfig warnings:
WARNING: unmet direct dependencies detected for PM
Depends on [n]: SPARC64 [=n]
Selected by [y]:
- SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])
WARNING: unmet direct dependencies detected for PM
Depends on [n]: SPARC64 [=n]
Selected by [y]:
- SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])
WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS
Depends on [n]: SPARC64 [=n] && PM [=y]
Selected by [y]:
- QCOM_GDSC [=y] && COMMON_CLK [=y] && PM [=y]
- SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])
- MESON_GX_PM_DOMAINS [=y] && (ARCH_MESON || COMPILE_TEST [=y]) && PM [=y] && OF [=y]
- BCM2835_POWER [=y] && (ARCH_BCM2835 || COMPILE_TEST [=y] && OF [=y]) && PM [=y]
- BCM_PMB [=y] && (ARCH_BCMBCA || COMPILE_TEST [=y] && OF [=y]) && PM [=y]
- ROCKCHIP_PM_DOMAINS [=y] && (ARCH_ROCKCHIP || COMPILE_TEST [=y]) && PM [=y]
Selected by [m]:
- ARM_SCPI_POWER_DOMAIN [=m] && (ARM_SCPI_PROTOCOL [=m] || COMPILE_TEST [=y] && OF [=y]) && PM [=y]
- MESON_EE_PM_DOMAINS [=m] && (ARCH_MESON || COMPILE_TEST [=y]) && PM [=y] && OF [=y]
- QCOM_AOSS_QMP [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) && MAILBOX [=y] && COMMON_CLK [=y] && PM [=y]
WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS_OF
Depends on [n]: SPARC64 [=n] && PM_GENERIC_DOMAINS [=y] && OF [=y]
Selected by [y]:
- MESON_GX_PM_DOMAINS [=y] && (ARCH_MESON || COMPILE_TEST [=y]) && PM [=y] && OF [=y]
Selected by [m]:
- MESON_EE_PM_DOMAINS [=m] && (ARCH_MESON || COMPILE_TEST [=y]) && PM [=y] && OF [=y]
Link: https://lkml.kernel.org/r/20230205004357.29459-1-rdunlap@infradead.org
Fixes: bdde6b3c8ba4 ("sparc64: Hibernation support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/sparc/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 4d3d1af90d521..84437a4c65454 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -283,7 +283,7 @@ config ARCH_FORCE_MAX_ORDER
This config option is actually maximum order plus one. For example,
a value of 13 means that the largest free memory block is 2^12 pages.
-if SPARC64
+if SPARC64 || COMPILE_TEST
source "kernel/power/Kconfig"
endif
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 395/885] selftests: find echo binary to use -ne options
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (393 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 394/885] sparc: allow PM configs for sparc32 COMPILE_TEST Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 396/885] selftests/ftrace: Fix bash specific "==" operator Greg Kroah-Hartman
` (492 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernelci.org bot, Guillaume Tucker,
Shuah Khan, Sasha Levin
From: Guillaume Tucker <guillaume.tucker@collabora.com>
[ Upstream commit 4ebe33398c40c1118b4d8546978036c0e0032d1b ]
Find the actual echo binary using $(which echo) and use it for
formatted output with -ne. On some systems, the default echo command
doesn't handle the -e option and the output looks like this (arm64
build):
-ne Emit Tests for alsa
-ne Emit Tests for amd-pstate
-ne Emit Tests for arm64
This is for example the case with the KernelCI Docker images
e.g. kernelci/gcc-10:x86-kselftest-kernelci. With the actual echo
binary (e.g. in /bin/echo), the output is formatted as expected (x86
build this time):
Emit Tests for alsa
Emit Tests for amd-pstate
Skipping non-existent dir: arm64
Only the install target is using "echo -ne" so keep the $ECHO variable
local to it.
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Fixes: 3297a4df805d ("kselftests: Enable the echo command to print newlines in Makefile")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/Makefile | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index f07aef7c592c2..253596a1cb69c 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -231,10 +231,11 @@ ifdef INSTALL_PATH
@# While building kselftest-list.text skip also non-existent TARGET dirs:
@# they could be the result of a build failure and should NOT be
@# included in the generated runlist.
+ ECHO=`which echo`; \
for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- [ ! -d $(INSTALL_PATH)/$$TARGET ] && echo "Skipping non-existent dir: $$TARGET" && continue; \
- echo -ne "Emit Tests for $$TARGET\n"; \
+ [ ! -d $(INSTALL_PATH)/$$TARGET ] && $$ECHO "Skipping non-existent dir: $$TARGET" && continue; \
+ $$ECHO -ne "Emit Tests for $$TARGET\n"; \
$(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET COLLECTION=$$TARGET \
-C $$TARGET emit_tests >> $(TEST_LIST); \
done;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 396/885] selftests/ftrace: Fix bash specific "==" operator
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (394 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 395/885] selftests: find echo binary to use -ne options Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 397/885] selftests: use printf instead of echo -ne Greg Kroah-Hartman
` (491 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Masami Hiramatsu (Google),
Steven Rostedt (Google),
Shuah Khan, Sasha Levin
From: Masami Hiramatsu (Google) <mhiramat@kernel.org>
[ Upstream commit 1e6b485c922fbedf41d5a9f4e6449c5aeb923a32 ]
Since commit a1d6cd88c897 ("selftests/ftrace: event_triggers: wait
longer for test_event_enable") introduced bash specific "=="
comparation operator, that test will fail when we run it on a
posix-shell. `checkbashisms` warned it as below.
possible bashism in ftrace/func_event_triggers.tc line 45 (should be 'b = a'):
if [ "$e" == $val ]; then
This replaces it with "=".
Fixes: a1d6cd88c897 ("selftests/ftrace: event_triggers: wait longer for test_event_enable")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../selftests/ftrace/test.d/ftrace/func_event_triggers.tc | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc
index 3eea2abf68f9e..2ad7d4b501cc1 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc
@@ -42,7 +42,7 @@ test_event_enabled() {
while [ $check_times -ne 0 ]; do
e=`cat $EVENT_ENABLE`
- if [ "$e" == $val ]; then
+ if [ "$e" = $val ]; then
return 0
fi
sleep $SLEEP_TIME
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 397/885] selftests: use printf instead of echo -ne
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (395 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 396/885] selftests/ftrace: Fix bash specific "==" operator Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 398/885] perf record: Fix segfault with --overwrite and --max-size Greg Kroah-Hartman
` (490 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernelci.org bot, David Laight,
Guillaume Tucker, Guenter Roeck, Shuah Khan, Sasha Levin
From: Guillaume Tucker <guillaume.tucker@collabora.com>
[ Upstream commit 9e34fad00fc889abbb99d751a4c22cf2bded10df ]
Rather than trying to guess which implementation of "echo" to run with
support for "-ne" options, use "printf" instead of "echo -ne". It
handles escape characters as a standard feature and it is widespread
among modern shells.
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Fixes: 3297a4df805d ("kselftests: Enable the echo command to print newlines in Makefile")
Fixes: 79c16b1120fe ("selftests: find echo binary to use -ne options")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/Makefile | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 253596a1cb69c..aae64eb2ae737 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -231,11 +231,10 @@ ifdef INSTALL_PATH
@# While building kselftest-list.text skip also non-existent TARGET dirs:
@# they could be the result of a build failure and should NOT be
@# included in the generated runlist.
- ECHO=`which echo`; \
for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- [ ! -d $(INSTALL_PATH)/$$TARGET ] && $$ECHO "Skipping non-existent dir: $$TARGET" && continue; \
- $$ECHO -ne "Emit Tests for $$TARGET\n"; \
+ [ ! -d $(INSTALL_PATH)/$$TARGET ] && printf "Skipping non-existent dir: $$TARGET\n" && continue; \
+ printf "Emit Tests for $$TARGET\n"; \
$(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET COLLECTION=$$TARGET \
-C $$TARGET emit_tests >> $(TEST_LIST); \
done;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 398/885] perf record: Fix segfault with --overwrite and --max-size
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (396 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 397/885] selftests: use printf instead of echo -ne Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 399/885] printf: fix errname.c list Greg Kroah-Hartman
` (489 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Jihong, Namhyung Kim,
Alexander Shishkin, Ingo Molnar, Jiri Olsa, Jiwei Sun,
Mark Rutland, Peter Zijlstra, Arnaldo Carvalho de Melo,
Sasha Levin
From: Yang Jihong <yangjihong1@huawei.com>
[ Upstream commit 91621be65d6812cd74b2ea09573ff9ee0cbf5666 ]
When --overwrite and --max-size options of perf record are used
together, a segmentation fault occurs. The following is an example:
# perf record -e sched:sched* --overwrite --max-size 1K -a -- sleep 1
[ perf record: Woken up 1 times to write data ]
perf: Segmentation fault
Obtained 12 stack frames.
./perf/perf(+0x197673) [0x55f99710b673]
/lib/x86_64-linux-gnu/libc.so.6(+0x3ef0f) [0x7fa45f3cff0f]
./perf/perf(+0x8eb40) [0x55f997002b40]
./perf/perf(+0x1f6882) [0x55f99716a882]
./perf/perf(+0x794c2) [0x55f996fed4c2]
./perf/perf(+0x7b7c7) [0x55f996fef7c7]
./perf/perf(+0x9074b) [0x55f99700474b]
./perf/perf(+0x12e23c) [0x55f9970a223c]
./perf/perf(+0x12e54a) [0x55f9970a254a]
./perf/perf(+0x7db60) [0x55f996ff1b60]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fa45f3b2c86]
./perf/perf(+0x7dfe9) [0x55f996ff1fe9]
Segmentation fault (core dumped)
backtrace of the core file is as follows:
(gdb) bt
#0 record__bytes_written (rec=0x55f99755a200 <record>) at builtin-record.c:234
#1 record__output_max_size_exceeded (rec=0x55f99755a200 <record>) at builtin-record.c:242
#2 record__write (map=0x0, size=12816, bf=0x55f9978da2e0, rec=0x55f99755a200 <record>) at builtin-record.c:263
#3 process_synthesized_event (tool=tool@entry=0x55f99755a200 <record>, event=event@entry=0x55f9978da2e0, sample=sample@entry=0x0, machine=machine@entry=0x55f997893658) at builtin-record.c:618
#4 0x000055f99716a883 in __perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=0x55f9978928b0, machine=machine@entry=0x55f997893658,
from=from@entry=0) at util/synthetic-events.c:1895
#5 0x000055f99716a91f in perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=<optimized out>, machine=machine@entry=0x55f997893658)
at util/synthetic-events.c:1905
#6 0x000055f996fed4c3 in record__synthesize (tail=tail@entry=true, rec=0x55f99755a200 <record>) at builtin-record.c:1997
#7 0x000055f996fef7c8 in __cmd_record (argc=argc@entry=2, argv=argv@entry=0x7ffc67551260, rec=0x55f99755a200 <record>) at builtin-record.c:2802
#8 0x000055f99700474c in cmd_record (argc=<optimized out>, argv=0x7ffc67551260) at builtin-record.c:4258
#9 0x000055f9970a223d in run_builtin (p=0x55f997564d88 <commands+264>, argc=10, argv=0x7ffc67551260) at perf.c:330
#10 0x000055f9970a254b in handle_internal_command (argc=10, argv=0x7ffc67551260) at perf.c:384
#11 0x000055f996ff1b61 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:428
#12 main (argc=<optimized out>, argv=0x7ffc67551260) at perf.c:562
The reason is that record__bytes_written accesses the freed memory rec->thread_data,
The process is as follows:
__cmd_record
-> record__free_thread_data
-> zfree(&rec->thread_data) // free rec->thread_data
-> record__synthesize
-> perf_event__synthesize_id_index
-> process_synthesized_event
-> record__write
-> record__bytes_written // access rec->thread_data
We add a member variable "thread_bytes_written" in the struct "record"
to save the data size written by the threads.
Fixes: 6d57581659f72299 ("perf record: Add support for limit perf output file size")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/CAM9d7ci_TRrqBQVQNW8=GwakUr7SsZpYxaaty-S4bxF8zJWyqw@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/builtin-record.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 59f3d98a0196d..48c3461b496c4 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -154,6 +154,7 @@ struct record {
struct perf_tool tool;
struct record_opts opts;
u64 bytes_written;
+ u64 thread_bytes_written;
struct perf_data data;
struct auxtrace_record *itr;
struct evlist *evlist;
@@ -226,14 +227,7 @@ static bool switch_output_time(struct record *rec)
static u64 record__bytes_written(struct record *rec)
{
- int t;
- u64 bytes_written = rec->bytes_written;
- struct record_thread *thread_data = rec->thread_data;
-
- for (t = 0; t < rec->nr_threads; t++)
- bytes_written += thread_data[t].bytes_written;
-
- return bytes_written;
+ return rec->bytes_written + rec->thread_bytes_written;
}
static bool record__output_max_size_exceeded(struct record *rec)
@@ -255,10 +249,12 @@ static int record__write(struct record *rec, struct mmap *map __maybe_unused,
return -1;
}
- if (map && map->file)
+ if (map && map->file) {
thread->bytes_written += size;
- else
+ rec->thread_bytes_written += size;
+ } else {
rec->bytes_written += size;
+ }
if (record__output_max_size_exceeded(rec) && !done) {
fprintf(stderr, "[ perf record: perf size limit reached (%" PRIu64 " KB),"
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 399/885] printf: fix errname.c list
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (397 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 398/885] perf record: Fix segfault with --overwrite and --max-size Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` Greg Kroah-Hartman
` (488 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Petr Mladek, Rasmus Villemoes,
Uwe Kleine-König, Andy Shevchenko, Arnd Bergmann,
Sergey Senozhatsky, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 0c2baf6509af1d11310ae4c1c839481a6e9a4bc4 ]
On most architectures, gcc -Wextra warns about the list of error
numbers containing both EDEADLK and EDEADLOCK:
lib/errname.c:15:67: warning: initialized field overwritten [-Woverride-init]
15 | #define E(err) [err + BUILD_BUG_ON_ZERO(err <= 0 || err > 300)] = "-" #err
| ^~~
lib/errname.c:172:2: note: in expansion of macro 'E'
172 | E(EDEADLK), /* EDEADLOCK */
| ^
On parisc, a similar error happens with -ECANCELLED, which is an
alias for ECANCELED.
Make the EDEADLK printing conditional on the number being distinct
from EDEADLOCK, and remove the -ECANCELLED bit completely as it
can never be hit.
To ensure these are correct, add static_assert lines that verify
all the remaining aliases are in fact identical to the canonical
name.
Fixes: 57f5677e535b ("printf: add support for printing symbolic error names")
Cc: Petr Mladek <pmladek@suse.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/all/20210514213456.745039-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20210927123409.1109737-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230206194126.380350-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/errname.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/lib/errname.c b/lib/errname.c
index 05cbf731545f0..67739b174a8cc 100644
--- a/lib/errname.c
+++ b/lib/errname.c
@@ -21,6 +21,7 @@ static const char *names_0[] = {
E(EADDRNOTAVAIL),
E(EADV),
E(EAFNOSUPPORT),
+ E(EAGAIN), /* EWOULDBLOCK */
E(EALREADY),
E(EBADE),
E(EBADF),
@@ -31,15 +32,17 @@ static const char *names_0[] = {
E(EBADSLT),
E(EBFONT),
E(EBUSY),
-#ifdef ECANCELLED
- E(ECANCELLED),
-#endif
+ E(ECANCELED), /* ECANCELLED */
E(ECHILD),
E(ECHRNG),
E(ECOMM),
E(ECONNABORTED),
+ E(ECONNREFUSED), /* EREFUSED */
E(ECONNRESET),
+ E(EDEADLK), /* EDEADLOCK */
+#if EDEADLK != EDEADLOCK /* mips, sparc, powerpc */
E(EDEADLOCK),
+#endif
E(EDESTADDRREQ),
E(EDOM),
E(EDOTDOT),
@@ -166,14 +169,17 @@ static const char *names_0[] = {
E(EUSERS),
E(EXDEV),
E(EXFULL),
-
- E(ECANCELED), /* ECANCELLED */
- E(EAGAIN), /* EWOULDBLOCK */
- E(ECONNREFUSED), /* EREFUSED */
- E(EDEADLK), /* EDEADLOCK */
};
#undef E
+#ifdef EREFUSED /* parisc */
+static_assert(EREFUSED == ECONNREFUSED);
+#endif
+#ifdef ECANCELLED /* parisc */
+static_assert(ECANCELLED == ECANCELED);
+#endif
+static_assert(EAGAIN == EWOULDBLOCK); /* everywhere */
+
#define E(err) [err - 512 + BUILD_BUG_ON_ZERO(err < 512 || err > 550)] = "-" #err
static const char *names_512[] = {
E(ERESTARTSYS),
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 400/885] perf tests stat_all_metrics: Change true workload to sleep workload for system wide check
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 002/885] HID: asus: use spinlock to safely schedule workers Greg Kroah-Hartman
` (886 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ian Rogers, Athira Rajeev,
Kajol Jain, Disha Goel, Madhavan Srinivasan, Nageswara R Sastry,
linuxppc-dev, Arnaldo Carvalho de Melo, Sasha Levin
From: Kajol Jain <kjain@linux.ibm.com>
[ Upstream commit f9fa0778ee7349a9aa3d2ea10e9f2ab843a0b44e ]
Testcase stat_all_metrics.sh fails in powerpc:
98: perf all metrics test : FAILED!
Logs with verbose:
[command]# ./perf test 98 -vv
98: perf all metrics test :
--- start ---
test child forked, pid 13262
Testing BRU_STALL_CPI
Testing COMPLETION_STALL_CPI
----
Testing TOTAL_LOCAL_NODE_PUMPS_P23
Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'.
Testing TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01
Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'.
----
Based on above logs, we could see some of the hv-24x7 metric events
fails, and logs suggest to run the metric event with -a option. This
change happened after the commit a4b8cfcabb1d90ec ("perf stat: Delay
metric parsing"), which delayed the metric parsing phase and now before
metric parsing phase perf tool identifies, whether target is system-wide
or not. With this change, perf_event_open will fails with workload
monitoring for uncore events as expected.
The perf all metric test case fails as some of the hv-24x7 metric events
may need bigger workload with system wide monitoring to get the data.
Fix this issue by changing current system wide check from true workload
to sleep 0.01 workload.
Result with the patch changes in powerpc:
98: perf all metrics test : Ok
Fixes: a4b8cfcabb1d90ec ("perf stat: Delay metric parsing")
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230215093827.124921-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/tests/shell/stat_all_metrics.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/tests/shell/stat_all_metrics.sh b/tools/perf/tests/shell/stat_all_metrics.sh
index 6e79349e42bef..22e9cb294b40e 100755
--- a/tools/perf/tests/shell/stat_all_metrics.sh
+++ b/tools/perf/tests/shell/stat_all_metrics.sh
@@ -11,7 +11,7 @@ for m in $(perf list --raw-dump metrics); do
continue
fi
# Failed so try system wide.
- result=$(perf stat -M "$m" -a true 2>&1)
+ result=$(perf stat -M "$m" -a sleep 0.01 2>&1)
if [[ "$result" =~ "${m:0:50}" ]]
then
continue
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 400/885] perf tests stat_all_metrics: Change true workload to sleep workload for system wide check
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
0 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Sasha Levin, Ian Rogers, Athira Rajeev, Nageswara R Sastry,
Greg Kroah-Hartman, patches, Arnaldo Carvalho de Melo,
Madhavan Srinivasan, Kajol Jain, Disha Goel, linuxppc-dev
From: Kajol Jain <kjain@linux.ibm.com>
[ Upstream commit f9fa0778ee7349a9aa3d2ea10e9f2ab843a0b44e ]
Testcase stat_all_metrics.sh fails in powerpc:
98: perf all metrics test : FAILED!
Logs with verbose:
[command]# ./perf test 98 -vv
98: perf all metrics test :
--- start ---
test child forked, pid 13262
Testing BRU_STALL_CPI
Testing COMPLETION_STALL_CPI
----
Testing TOTAL_LOCAL_NODE_PUMPS_P23
Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'.
Testing TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01
Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'.
----
Based on above logs, we could see some of the hv-24x7 metric events
fails, and logs suggest to run the metric event with -a option. This
change happened after the commit a4b8cfcabb1d90ec ("perf stat: Delay
metric parsing"), which delayed the metric parsing phase and now before
metric parsing phase perf tool identifies, whether target is system-wide
or not. With this change, perf_event_open will fails with workload
monitoring for uncore events as expected.
The perf all metric test case fails as some of the hv-24x7 metric events
may need bigger workload with system wide monitoring to get the data.
Fix this issue by changing current system wide check from true workload
to sleep 0.01 workload.
Result with the patch changes in powerpc:
98: perf all metrics test : Ok
Fixes: a4b8cfcabb1d90ec ("perf stat: Delay metric parsing")
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230215093827.124921-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/tests/shell/stat_all_metrics.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/tests/shell/stat_all_metrics.sh b/tools/perf/tests/shell/stat_all_metrics.sh
index 6e79349e42bef..22e9cb294b40e 100755
--- a/tools/perf/tests/shell/stat_all_metrics.sh
+++ b/tools/perf/tests/shell/stat_all_metrics.sh
@@ -11,7 +11,7 @@ for m in $(perf list --raw-dump metrics); do
continue
fi
# Failed so try system wide.
- result=$(perf stat -M "$m" -a true 2>&1)
+ result=$(perf stat -M "$m" -a sleep 0.01 2>&1)
if [[ "$result" =~ "${m:0:50}" ]]
then
continue
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 401/885] objtool: add UACCESS exceptions for __tsan_volatile_read/write
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (399 preceding siblings ...)
2023-03-07 16:55 ` Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 402/885] mfd: cs5535: Dont build on UML Greg Kroah-Hartman
` (486 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Marco Elver,
Alexander Potapenko, Andrey Konovalov, Andrey Ryabinin,
Dmitry Vyukov, Josh Poimboeuf, Kuan-Ying Lee,
Peter Zijlstra (Intel),
Vincenzo Frascino, Andrew Morton, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit d5d469247264e56960705dc5ae7e1d014861fe40 ]
A lot of the tsan helpers are already excempt from the UACCESS warnings,
but some more functions were added that need the same thing:
kernel/kcsan/core.o: warning: objtool: __tsan_volatile_read16+0x0: call to __tsan_unaligned_read16() with UACCESS enabled
kernel/kcsan/core.o: warning: objtool: __tsan_volatile_write16+0x0: call to __tsan_unaligned_write16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_read16+0x4: call to __tsan_unaligned_read16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_write16+0x4: call to __tsan_unaligned_write16() with UACCESS enabled
As Marco points out, these functions don't even call each other
explicitly but instead gcc (but not clang) notices the functions
being identical and turns one symbol into a direct branch to the
other.
Link: https://lkml.kernel.org/r/20230215130058.3836177-4-arnd@kernel.org
Fixes: 75d75b7a4d54 ("kcsan: Support distinguishing volatile accesses")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/objtool/check.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 51494c3002d91..0c1b6acad141f 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -1059,6 +1059,8 @@ static const char *uaccess_safe_builtin[] = {
"__tsan_atomic64_compare_exchange_val",
"__tsan_atomic_thread_fence",
"__tsan_atomic_signal_fence",
+ "__tsan_unaligned_read16",
+ "__tsan_unaligned_write16",
/* KCOV */
"write_comp_data",
"check_kcov_mode",
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 402/885] mfd: cs5535: Dont build on UML
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (400 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 401/885] objtool: add UACCESS exceptions for __tsan_volatile_read/write Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 403/885] mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read() Greg Kroah-Hartman
` (485 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Randy Dunlap, Lee Jones, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 5ec32a3e4053c1a726b45381d56aa9e39eaf3911 ]
The cs5535-mfd driver uses CPU-specific data that is not available
for ARCH=um builds, so don't allow it to be built for UML.
Prevents these build errors:
In file included from ../arch/x86/include/asm/olpc.h:7,
from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:46: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
17 | (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
18 | (boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:46: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
24 | (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
25 | (boot_cpu_data.x86_model == 10));
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221201012541.11809-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mfd/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9940e2724c05d..9da8235cb6900 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -15,6 +15,7 @@ config MFD_CS5535
tristate "AMD CS5535 and CS5536 southbridge core functions"
select MFD_CORE
depends on PCI && (X86_32 || (X86 && COMPILE_TEST))
+ depends on !UML
help
This is the core driver for CS5535/CS5536 MFD functions. This is
necessary for using the board's GPIO and MFGPT functionality.
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 403/885] mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (401 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 402/885] mfd: cs5535: Dont build on UML Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 404/885] dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0 Greg Kroah-Hartman
` (484 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Qiheng Lin, Lee Jones, Sasha Levin
From: Qiheng Lin <linqiheng@huawei.com>
[ Upstream commit 8b450dcff23aa254844492831a8e2b508a9d522d ]
`req` is allocated in pcf50633_adc_async_read(), but
adc_enqueue_request() could fail to insert the `req` into queue.
We need to check the return value and free it in the case of failure.
Fixes: 08c3e06a5eb2 ("mfd: PCF50633 adc driver")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221208061555.8776-1-linqiheng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mfd/pcf50633-adc.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
index 5cd653e615125..191b1bc6141c2 100644
--- a/drivers/mfd/pcf50633-adc.c
+++ b/drivers/mfd/pcf50633-adc.c
@@ -136,6 +136,7 @@ int pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
void *callback_param)
{
struct pcf50633_adc_request *req;
+ int ret;
/* req is freed when the result is ready, in interrupt handler */
req = kmalloc(sizeof(*req), GFP_KERNEL);
@@ -147,7 +148,11 @@ int pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
req->callback = callback;
req->callback_param = callback_param;
- return adc_enqueue_request(pcf, req);
+ ret = adc_enqueue_request(pcf, req);
+ if (ret)
+ kfree(req);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(pcf50633_adc_async_read);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 404/885] dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (402 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 403/885] mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read() Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 405/885] RDMA/erdma: Fix refcount leak in erdma_mmap Greg Kroah-Hartman
` (483 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Fenghua Yu, Dave Jiang, Vinod Koul,
Sasha Levin
From: Fenghua Yu <fenghua.yu@intel.com>
[ Upstream commit 9735bde36487da43d3c3fc910df49639f72decbf ]
On DSA/IAX 1.0, TC-A and TC-B in GRPCFG are set as 1 to have best
performance and cannot be changed through sysfs knobs unless override
option is given.
The same values should be set on DSA 2.0 as well.
Fixes: ea7c8f598c32 ("dmaengine: idxd: restore traffic class defaults after wq reset")
Fixes: ade8a86b512c ("dmaengine: idxd: Set defaults for GRPCFG traffic class")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221209172141.562648-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/idxd/device.c | 2 +-
drivers/dma/idxd/init.c | 2 +-
drivers/dma/idxd/sysfs.c | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 6d8ff664fdfb2..3b4ad7739f9ee 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -702,7 +702,7 @@ static void idxd_groups_clear_state(struct idxd_device *idxd)
group->use_rdbuf_limit = false;
group->rdbufs_allowed = 0;
group->rdbufs_reserved = 0;
- if (idxd->hw.version < DEVICE_VERSION_2 && !tc_override) {
+ if (idxd->hw.version <= DEVICE_VERSION_2 && !tc_override) {
group->tc_a = 1;
group->tc_b = 1;
} else {
diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
index 09cbf0c179ba9..e0f49545d89ff 100644
--- a/drivers/dma/idxd/init.c
+++ b/drivers/dma/idxd/init.c
@@ -296,7 +296,7 @@ static int idxd_setup_groups(struct idxd_device *idxd)
}
idxd->groups[i] = group;
- if (idxd->hw.version < DEVICE_VERSION_2 && !tc_override) {
+ if (idxd->hw.version <= DEVICE_VERSION_2 && !tc_override) {
group->tc_a = 1;
group->tc_b = 1;
} else {
diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
index 3229dfc786507..18cd8151dee02 100644
--- a/drivers/dma/idxd/sysfs.c
+++ b/drivers/dma/idxd/sysfs.c
@@ -387,7 +387,7 @@ static ssize_t group_traffic_class_a_store(struct device *dev,
if (idxd->state == IDXD_DEV_ENABLED)
return -EPERM;
- if (idxd->hw.version < DEVICE_VERSION_2 && !tc_override)
+ if (idxd->hw.version <= DEVICE_VERSION_2 && !tc_override)
return -EPERM;
if (val < 0 || val > 7)
@@ -429,7 +429,7 @@ static ssize_t group_traffic_class_b_store(struct device *dev,
if (idxd->state == IDXD_DEV_ENABLED)
return -EPERM;
- if (idxd->hw.version < DEVICE_VERSION_2 && !tc_override)
+ if (idxd->hw.version <= DEVICE_VERSION_2 && !tc_override)
return -EPERM;
if (val < 0 || val > 7)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 405/885] RDMA/erdma: Fix refcount leak in erdma_mmap
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (403 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 404/885] dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0 Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 406/885] dmaengine: HISI_DMA should depend on ARCH_HISI Greg Kroah-Hartman
` (482 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miaoqian Lin, Cheng Xu,
Leon Romanovsky, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit ee84146c05ad2316b9a7222d0ec4413e0bf30eeb ]
rdma_user_mmap_entry_get() take reference, we should release it when not
need anymore, add the missing rdma_user_mmap_entry_put() in the error
path to fix it.
Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20221220121139.1540564-1-linmq006@gmail.com
Acked-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/erdma/erdma_verbs.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/erdma/erdma_verbs.c b/drivers/infiniband/hw/erdma/erdma_verbs.c
index 62be98e2b9414..19c69ea1b0c0f 100644
--- a/drivers/infiniband/hw/erdma/erdma_verbs.c
+++ b/drivers/infiniband/hw/erdma/erdma_verbs.c
@@ -1089,12 +1089,14 @@ int erdma_mmap(struct ib_ucontext *ctx, struct vm_area_struct *vma)
prot = pgprot_device(vma->vm_page_prot);
break;
default:
- return -EINVAL;
+ err = -EINVAL;
+ goto put_entry;
}
err = rdma_user_mmap_io(ctx, vma, PFN_DOWN(entry->address), PAGE_SIZE,
prot, rdma_entry);
+put_entry:
rdma_user_mmap_entry_put(rdma_entry);
return err;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 406/885] dmaengine: HISI_DMA should depend on ARCH_HISI
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (404 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 405/885] RDMA/erdma: Fix refcount leak in erdma_mmap Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 407/885] RDMA/hns: Fix refcount leak in hns_roce_mmap Greg Kroah-Hartman
` (481 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Geert Uytterhoeven, Vinod Koul, Sasha Levin
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit dcca9d045c0852584ad092123c7f6e6526a633b1 ]
The HiSilicon DMA Engine is only present on HiSilicon SoCs. Hence add a
dependency on ARCH_HISI, to prevent asking the user about this driver
when configuring a kernel without HiSilicon SoC support.
Fixes: e9f08b65250d73ab ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/363a1816d36cd3cf604d88ec90f97c75f604de64.1669044190.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 7524b62a8870a..b64ae02c26f8c 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -244,7 +244,7 @@ config FSL_RAID
config HISI_DMA
tristate "HiSilicon DMA Engine support"
- depends on ARM64 || COMPILE_TEST
+ depends on ARCH_HISI || COMPILE_TEST
depends on PCI_MSI
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 407/885] RDMA/hns: Fix refcount leak in hns_roce_mmap
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (405 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 406/885] dmaengine: HISI_DMA should depend on ARCH_HISI Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 408/885] iio: light: tsl2563: Do not hardcode interrupt trigger type Greg Kroah-Hartman
` (480 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miaoqian Lin, Leon Romanovsky, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit cf6a05c8494a8ae7fec8e5f1229b45ca5b4bcd30 ]
rdma_user_mmap_entry_get_pgoff() takes the reference.
Add missing rdma_user_mmap_entry_put() to release the reference.
Fixes: 0045e0d3f42e ("RDMA/hns: Support direct wqe of userspace")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by Haoyue Xu <xuhaoyue1@hisilicon.com>
Link: https://lore.kernel.org/r/20221223072900.802728-1-linmq006@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hns/hns_roce_main.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_main.c b/drivers/infiniband/hw/hns/hns_roce_main.c
index 8ba68ac12388d..946ba1109e878 100644
--- a/drivers/infiniband/hw/hns/hns_roce_main.c
+++ b/drivers/infiniband/hw/hns/hns_roce_main.c
@@ -443,14 +443,15 @@ static int hns_roce_mmap(struct ib_ucontext *uctx, struct vm_area_struct *vma)
prot = pgprot_device(vma->vm_page_prot);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
ret = rdma_user_mmap_io(uctx, vma, pfn, rdma_entry->npages * PAGE_SIZE,
prot, rdma_entry);
+out:
rdma_user_mmap_entry_put(rdma_entry);
-
return ret;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 408/885] iio: light: tsl2563: Do not hardcode interrupt trigger type
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (406 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 407/885] RDMA/hns: Fix refcount leak in hns_roce_mmap Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 409/885] usb: gadget: fusb300_udc: free irq on the error path in fusb300_probe() Greg Kroah-Hartman
` (479 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ferry Toth, Andy Shevchenko,
Jonathan Cameron, Sasha Levin
From: Ferry Toth <ftoth@exalondelft.nl>
[ Upstream commit 027641b52fe37b64af61025298ce160c8b9b7a73 ]
Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_RAISING,
let's respect the settings specified in the firmware description.
To be compatible with the older firmware descriptions, if trigger
type is not set up there, we'll set it to default (raising edge).
Fixes: 388be4883952 ("staging:iio: tsl2563 abi fixes and interrupt handling")
Fixes: bdab1001738f ("staging:iio:light:tsl2563 remove old style event registration.")
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221207190348.9347-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/light/tsl2563.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index 951f35ef3f41d..47a4626e94610 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -705,6 +705,7 @@ static int tsl2563_probe(struct i2c_client *client,
struct iio_dev *indio_dev;
struct tsl2563_chip *chip;
struct tsl2563_platform_data *pdata = client->dev.platform_data;
+ unsigned long irq_flags;
int err = 0;
u8 id = 0;
@@ -760,10 +761,15 @@ static int tsl2563_probe(struct i2c_client *client,
indio_dev->info = &tsl2563_info_no_irq;
if (client->irq) {
+ irq_flags = irq_get_trigger_type(client->irq);
+ if (irq_flags == IRQF_TRIGGER_NONE)
+ irq_flags = IRQF_TRIGGER_RISING;
+ irq_flags |= IRQF_ONESHOT;
+
err = devm_request_threaded_irq(&client->dev, client->irq,
NULL,
&tsl2563_event_handler,
- IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ irq_flags,
"tsl2563_event",
indio_dev);
if (err) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 409/885] usb: gadget: fusb300_udc: free irq on the error path in fusb300_probe()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (407 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 408/885] iio: light: tsl2563: Do not hardcode interrupt trigger type Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 410/885] i2c: designware: fix i2c_dw_clk_rate() return size to be u32 Greg Kroah-Hartman
` (478 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit a8d3392e0e5cfeb03f0cea1f2bc3f5f183c1deb4 ]
When request_irq(ires1->start) failed in w5300_hw_probe(), irq
ires->start has not been freed, and on the clean_up3 error path,
we also need to free ires1->start irq, fix it.
In addition, We should add free_irq in fusb300_remove(), and give
the lables a proper name so that they can be understood easily,
so add free_irq in fusb300_remove(), and update clean_up3 to
err_alloc_request.
Fixes: 0fe6f1d1f612 ("usb: udc: add Faraday fusb300 driver")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221123014121.1989721-1-cuigaosheng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/fusb300_udc.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
index 5954800d652ca..08ba9c8c1e677 100644
--- a/drivers/usb/gadget/udc/fusb300_udc.c
+++ b/drivers/usb/gadget/udc/fusb300_udc.c
@@ -1346,6 +1346,7 @@ static int fusb300_remove(struct platform_device *pdev)
usb_del_gadget_udc(&fusb300->gadget);
iounmap(fusb300->reg);
free_irq(platform_get_irq(pdev, 0), fusb300);
+ free_irq(platform_get_irq(pdev, 1), fusb300);
fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
@@ -1431,7 +1432,7 @@ static int fusb300_probe(struct platform_device *pdev)
IRQF_SHARED, udc_name, fusb300);
if (ret < 0) {
pr_err("request_irq1 error (%d)\n", ret);
- goto clean_up;
+ goto err_request_irq1;
}
INIT_LIST_HEAD(&fusb300->gadget.ep_list);
@@ -1470,7 +1471,7 @@ static int fusb300_probe(struct platform_device *pdev)
GFP_KERNEL);
if (fusb300->ep0_req == NULL) {
ret = -ENOMEM;
- goto clean_up3;
+ goto err_alloc_request;
}
init_controller(fusb300);
@@ -1485,7 +1486,10 @@ static int fusb300_probe(struct platform_device *pdev)
err_add_udc:
fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
-clean_up3:
+err_alloc_request:
+ free_irq(ires1->start, fusb300);
+
+err_request_irq1:
free_irq(ires->start, fusb300);
clean_up:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 410/885] i2c: designware: fix i2c_dw_clk_rate() return size to be u32
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (408 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 409/885] usb: gadget: fusb300_udc: free irq on the error path in fusb300_probe() Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 411/885] soundwire: cadence: Dont overflow the command FIFOs Greg Kroah-Hartman
` (477 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hanna Hawa, Andy Shevchenko,
Jarkko Nikula, Wolfram Sang, Sasha Levin
From: Hanna Hawa <hhhawa@amazon.com>
[ Upstream commit f2e1fa99550dd7a882229e2c2cd9ecab4ce773d0 ]
Make i2c_dw_clk_rate() to return u32 instead of unsigned long, as the
function return the value of get_clk_rate_khz() which returns u32.
Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided")
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-designware-common.c | 2 +-
drivers/i2c/busses/i2c-designware-core.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index bceaf70f4e237..6fdb25a5f8016 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -465,7 +465,7 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev)
dev_warn(dev->dev, "timeout in disabling adapter\n");
}
-unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
+u32 i2c_dw_clk_rate(struct dw_i2c_dev *dev)
{
/*
* Clock is not necessary if we got LCNT/HCNT values directly from
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 4d3a3b464ecd8..56a029da448a7 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -322,7 +322,7 @@ int i2c_dw_init_regmap(struct dw_i2c_dev *dev);
u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev);
-unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev);
+u32 i2c_dw_clk_rate(struct dw_i2c_dev *dev);
int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare);
int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
void i2c_dw_release_lock(struct dw_i2c_dev *dev);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 411/885] soundwire: cadence: Dont overflow the command FIFOs
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (409 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 410/885] i2c: designware: fix i2c_dw_clk_rate() return size to be u32 Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 412/885] driver core: fix potential null-ptr-deref in device_add() Greg Kroah-Hartman
` (476 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Richard Fitzgerald,
Pierre-Louis Bossart, Vinod Koul, Sasha Levin
From: Richard Fitzgerald <rf@opensource.cirrus.com>
[ Upstream commit 7cbfee2e2e40d2be54196362a845a3ea0a3f877d ]
The command FIFOs in the Cadence IP can be configured during design
up to 32 entries, and the code in cadence_master.c was assuming the
full 32-entry FIFO. But all current Intel implementations use an 8-entry
FIFO.
Up to now the longest message used was 6 entries so this wasn't
causing any problem. But future Cirrus Logic codecs have downloadable
firmware or tuning blobs. It is more efficient for the codec driver to
issue long transfers that can take advantage of any queuing in the
Soundwire controller and avoid the overhead of repeatedly writing the
page registers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 2f52a5177caa ("soundwire: cdns: Add cadence library")
Link: https://lore.kernel.org/r/20221202161812.4186897-2-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soundwire/cadence_master.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c
index 93929f19d0831..b65cdf2a7593e 100644
--- a/drivers/soundwire/cadence_master.c
+++ b/drivers/soundwire/cadence_master.c
@@ -127,7 +127,8 @@ MODULE_PARM_DESC(cdns_mcp_int_mask, "Cadence MCP IntMask");
#define CDNS_MCP_CMD_BASE 0x80
#define CDNS_MCP_RESP_BASE 0x80
-#define CDNS_MCP_CMD_LEN 0x20
+/* FIFO can hold 8 commands */
+#define CDNS_MCP_CMD_LEN 8
#define CDNS_MCP_CMD_WORD_LEN 0x4
#define CDNS_MCP_CMD_SSP_TAG BIT(31)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 412/885] driver core: fix potential null-ptr-deref in device_add()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (410 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 411/885] soundwire: cadence: Dont overflow the command FIFOs Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 413/885] kobject: modify kobject_get_path() to take a const * Greg Kroah-Hartman
` (475 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit f6837f34a34973ef6600c08195ed300e24e97317 ]
I got the following null-ptr-deref report while doing fault injection test:
BUG: kernel NULL pointer dereference, address: 0000000000000058
CPU: 2 PID: 278 Comm: 37-i2c-ds2482 Tainted: G B W N 6.1.0-rc3+
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x196/0x210
bus_remove_device+0x1bd/0x240
device_add+0xd3d/0x1100
w1_add_master_device+0x476/0x490 [wire]
ds2482_probe+0x303/0x3e0 [ds2482]
This is how it happened:
w1_alloc_dev()
// The dev->driver is set to w1_master_driver.
memcpy(&dev->dev, device, sizeof(struct device));
device_add()
bus_add_device()
dpm_sysfs_add() // It fails, calls bus_remove_device.
// error path
bus_remove_device()
// The dev->driver is not null, but driver is not bound.
__device_release_driver()
klist_remove(&dev->p->knode_driver) <-- It causes null-ptr-deref.
// normal path
bus_probe_device() // It's not called yet.
device_bind_driver()
If dev->driver is set, in the error path after calling bus_add_device()
in device_add(), bus_remove_device() is called, then the device will be
detached from driver. But device_bind_driver() is not called yet, so it
causes null-ptr-deref while access the 'knode_driver'. To fix this, set
dev->driver to null in the error path before calling bus_remove_device().
Fixes: 57eee3d23e88 ("Driver core: Call device_pm_add() after bus_add_device() in device_add()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221205034904.2077765-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index d02501933467d..e5c15061070b7 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -3551,6 +3551,7 @@ int device_add(struct device *dev)
device_pm_remove(dev);
dpm_sysfs_remove(dev);
DPMError:
+ dev->driver = NULL;
bus_remove_device(dev);
BusError:
device_remove_attrs(dev);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 413/885] kobject: modify kobject_get_path() to take a const *
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (411 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 412/885] driver core: fix potential null-ptr-deref in device_add() Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 414/885] kobject: Fix slab-out-of-bounds in fill_kobj_path() Greg Kroah-Hartman
` (474 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Rafael J. Wysocki, Sasha Levin
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33a0a1e3b3d17445832177981dc7a1c6a5b009f8 ]
kobject_get_path() does not modify the kobject passed to it, so make the
pointer constant.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20221001165315.2690141-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 3bb2a01caa81 ("kobject: Fix slab-out-of-bounds in fill_kobj_path()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/kobject.h | 2 +-
lib/kobject.c | 10 +++++-----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 57fb972fea05b..592f9785b058a 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -115,7 +115,7 @@ extern void kobject_put(struct kobject *kobj);
extern const void *kobject_namespace(struct kobject *kobj);
extern void kobject_get_ownership(struct kobject *kobj,
kuid_t *uid, kgid_t *gid);
-extern char *kobject_get_path(struct kobject *kobj, gfp_t flag);
+extern char *kobject_get_path(const struct kobject *kobj, gfp_t flag);
struct kobj_type {
void (*release)(struct kobject *kobj);
diff --git a/lib/kobject.c b/lib/kobject.c
index a0b2dbfcfa233..0380ec889a6af 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -94,10 +94,10 @@ static int create_dir(struct kobject *kobj)
return 0;
}
-static int get_kobj_path_length(struct kobject *kobj)
+static int get_kobj_path_length(const struct kobject *kobj)
{
int length = 1;
- struct kobject *parent = kobj;
+ const struct kobject *parent = kobj;
/* walk up the ancestors until we hit the one pointing to the
* root.
@@ -112,9 +112,9 @@ static int get_kobj_path_length(struct kobject *kobj)
return length;
}
-static void fill_kobj_path(struct kobject *kobj, char *path, int length)
+static void fill_kobj_path(const struct kobject *kobj, char *path, int length)
{
- struct kobject *parent;
+ const struct kobject *parent;
--length;
for (parent = kobj; parent; parent = parent->parent) {
@@ -136,7 +136,7 @@ static void fill_kobj_path(struct kobject *kobj, char *path, int length)
*
* Return: The newly allocated memory, caller must free with kfree().
*/
-char *kobject_get_path(struct kobject *kobj, gfp_t gfp_mask)
+char *kobject_get_path(const struct kobject *kobj, gfp_t gfp_mask)
{
char *path;
int len;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 414/885] kobject: Fix slab-out-of-bounds in fill_kobj_path()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (412 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 413/885] kobject: modify kobject_get_path() to take a const * Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 415/885] alpha/boot/tools/objstrip: fix the check for ELF header Greg Kroah-Hartman
` (473 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Wang Hai, Sasha Levin
From: Wang Hai <wanghai38@huawei.com>
[ Upstream commit 3bb2a01caa813d3a1845d378bbe4169ef280d394 ]
In kobject_get_path(), if kobj->name is changed between calls
get_kobj_path_length() and fill_kobj_path() and the length becomes
longer, then fill_kobj_path() will have an out-of-bounds bug.
The actual current problem occurs when the ixgbe probe.
In ixgbe_mii_bus_init(), if the length of netdev->dev.kobj.name
length becomes longer, out-of-bounds will occur.
cpu0 cpu1
ixgbe_probe
register_netdev(netdev)
netdev_register_kobject
device_add
kobject_uevent // Sending ADD events
systemd-udevd // rename netdev
dev_change_name
device_rename
kobject_rename
ixgbe_mii_bus_init |
mdiobus_register |
__mdiobus_register |
device_register |
device_add |
kobject_uevent |
kobject_get_path |
len = get_kobj_path_length // old name |
path = kzalloc(len, gfp_mask); |
kobj->name = name;
/* name length becomes
* longer
*/
fill_kobj_path /* kobj path length is
* longer than path,
* resulting in out of
* bounds when filling path
*/
This is the kasan report:
==================================================================
BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0
Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673
Workqueue: events work_for_cpu_fn
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
print_address_description.constprop.0+0x86/0x1e7
print_report+0x36/0x4f
kasan_report+0xad/0x130
kasan_check_range+0x35/0x1c0
memcpy+0x39/0x60
fill_kobj_path+0x50/0xc0
kobject_get_path+0x5a/0xc0
kobject_uevent_env+0x140/0x460
device_add+0x5c7/0x910
__mdiobus_register+0x14e/0x490
ixgbe_probe.cold+0x441/0x574 [ixgbe]
local_pci_probe+0x78/0xc0
work_for_cpu_fn+0x26/0x40
process_one_work+0x3b6/0x6a0
worker_thread+0x368/0x520
kthread+0x165/0x1a0
ret_from_fork+0x1f/0x30
This reproducer triggers that bug:
while:
do
rmmod ixgbe
sleep 0.5
modprobe ixgbe
sleep 0.5
When calling fill_kobj_path() to fill path, if the name length of
kobj becomes longer, return failure and retry. This fixes the problem.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20221220012143.52141-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/kobject.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/lib/kobject.c b/lib/kobject.c
index 0380ec889a6af..aa375a5d94419 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -112,7 +112,7 @@ static int get_kobj_path_length(const struct kobject *kobj)
return length;
}
-static void fill_kobj_path(const struct kobject *kobj, char *path, int length)
+static int fill_kobj_path(const struct kobject *kobj, char *path, int length)
{
const struct kobject *parent;
@@ -121,12 +121,16 @@ static void fill_kobj_path(const struct kobject *kobj, char *path, int length)
int cur = strlen(kobject_name(parent));
/* back up enough to print this name with '/' */
length -= cur;
+ if (length <= 0)
+ return -EINVAL;
memcpy(path + length, kobject_name(parent), cur);
*(path + --length) = '/';
}
pr_debug("kobject: '%s' (%p): %s: path = '%s'\n", kobject_name(kobj),
kobj, __func__, path);
+
+ return 0;
}
/**
@@ -141,13 +145,17 @@ char *kobject_get_path(const struct kobject *kobj, gfp_t gfp_mask)
char *path;
int len;
+retry:
len = get_kobj_path_length(kobj);
if (len == 0)
return NULL;
path = kzalloc(len, gfp_mask);
if (!path)
return NULL;
- fill_kobj_path(kobj, path, len);
+ if (fill_kobj_path(kobj, path, len)) {
+ kfree(path);
+ goto retry;
+ }
return path;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 415/885] alpha/boot/tools/objstrip: fix the check for ELF header
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (413 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 414/885] kobject: Fix slab-out-of-bounds in fill_kobj_path() Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 416/885] media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible() Greg Kroah-Hartman
` (472 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Al Viro, Sasha Levin
From: Al Viro <viro@zeniv.linux.org.uk>
[ Upstream commit 1878787797cbb019eeefe6f905514dcd557302b6 ]
Just memcmp() with ELFMAG - that's the normal way to do it in userland
code, which that thing is. Besides, that has the benefit of actually
building - str_has_prefix() is *NOT* present in <string.h>.
Fixes: 5f14596e55de "alpha: Replace strncmp with str_has_prefix"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/alpha/boot/tools/objstrip.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c
index 08b430d25a315..7cf92d172dce9 100644
--- a/arch/alpha/boot/tools/objstrip.c
+++ b/arch/alpha/boot/tools/objstrip.c
@@ -148,7 +148,7 @@ main (int argc, char *argv[])
#ifdef __ELF__
elf = (struct elfhdr *) buf;
- if (elf->e_ident[0] == 0x7f && str_has_prefix((char *)elf->e_ident + 1, "ELF")) {
+ if (memcmp(&elf->e_ident[EI_MAG0], ELFMAG, SELFMAG) == 0) {
if (elf->e_type != ET_EXEC) {
fprintf(stderr, "%s: %s is not an ELF executable\n",
prog_name, inname);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 416/885] media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (414 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 415/885] alpha/boot/tools/objstrip: fix the check for ELF header Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 417/885] media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU Greg Kroah-Hartman
` (471 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Laurent Pinchart, Ricardo Ribalda,
Hans Verkuil, Sasha Levin
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[ Upstream commit 9f582f0418ed1c18f92c9e4628075d6ec9a7d9fb ]
Check for inactive controls in uvc_ctrl_is_accessible().
Use the new value for the master_id controls if present, otherwise
use the existing value to determine if it is OK to set the control.
Doing this here avoids attempting to set an inactive control, which
will return an error from the USB device, which returns an invalid
errorcode.
This fixes:
warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO
warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO
test VIDIOC_G/S_CTRL: OK
warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO
warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO
warn: v4l2-test-controls.cpp(816): s_ext_ctrls returned EIO
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
Tested with:
v4l2-ctl -c auto_exposure=1
OK
v4l2-ctl -c exposure_time_absolute=251
OK
v4l2-ctl -c auto_exposure=3
OK
v4l2-ctl -c exposure_time_absolute=251
VIDIOC_S_EXT_CTRLS: failed: Input/output error
exposure_time_absolute: Input/output error
ERROR
v4l2-ctl -c auto_exposure=3,exposure_time_absolute=251,auto_exposure=1
v4l2-ctl -C auto_exposure,exposure_time_absolute
auto_exposure: 1
exposure_time_absolute: 251
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/uvc/uvc_ctrl.c | 42 +++++++++++++++++++++++++++++++-
drivers/media/usb/uvc/uvc_v4l2.c | 3 +--
drivers/media/usb/uvc/uvcvideo.h | 3 ++-
3 files changed, 44 insertions(+), 4 deletions(-)
diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
index c95a2229f4fa9..6f5aaaf09ee01 100644
--- a/drivers/media/usb/uvc/uvc_ctrl.c
+++ b/drivers/media/usb/uvc/uvc_ctrl.c
@@ -1085,11 +1085,28 @@ static int uvc_query_v4l2_class(struct uvc_video_chain *chain, u32 req_id,
return 0;
}
+/*
+ * Check if control @v4l2_id can be accessed by the given control @ioctl
+ * (VIDIOC_G_EXT_CTRLS, VIDIOC_TRY_EXT_CTRLS or VIDIOC_S_EXT_CTRLS).
+ *
+ * For set operations on slave controls, check if the master's value is set to
+ * manual, either in the others controls set in the same ioctl call, or from
+ * the master's current value. This catches VIDIOC_S_EXT_CTRLS calls that set
+ * both the master and slave control, such as for instance setting
+ * auto_exposure=1, exposure_time_absolute=251.
+ */
int uvc_ctrl_is_accessible(struct uvc_video_chain *chain, u32 v4l2_id,
- bool read)
+ const struct v4l2_ext_controls *ctrls,
+ unsigned long ioctl)
{
+ struct uvc_control_mapping *master_map = NULL;
+ struct uvc_control *master_ctrl = NULL;
struct uvc_control_mapping *mapping;
struct uvc_control *ctrl;
+ bool read = ioctl == VIDIOC_G_EXT_CTRLS;
+ s32 val;
+ int ret;
+ int i;
if (__uvc_query_v4l2_class(chain, v4l2_id, 0) >= 0)
return -EACCES;
@@ -1104,6 +1121,29 @@ int uvc_ctrl_is_accessible(struct uvc_video_chain *chain, u32 v4l2_id,
if (!(ctrl->info.flags & UVC_CTRL_FLAG_SET_CUR) && !read)
return -EACCES;
+ if (ioctl != VIDIOC_S_EXT_CTRLS || !mapping->master_id)
+ return 0;
+
+ /*
+ * Iterate backwards in cases where the master control is accessed
+ * multiple times in the same ioctl. We want the last value.
+ */
+ for (i = ctrls->count - 1; i >= 0; i--) {
+ if (ctrls->controls[i].id == mapping->master_id)
+ return ctrls->controls[i].value ==
+ mapping->master_manual ? 0 : -EACCES;
+ }
+
+ __uvc_find_control(ctrl->entity, mapping->master_id, &master_map,
+ &master_ctrl, 0);
+
+ if (!master_ctrl || !(master_ctrl->info.flags & UVC_CTRL_FLAG_GET_CUR))
+ return 0;
+
+ ret = __uvc_ctrl_get(chain, master_ctrl, master_map, &val);
+ if (ret >= 0 && val != mapping->master_manual)
+ return -EACCES;
+
return 0;
}
diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c
index f4d4c33b6dfbd..3edb54c086b24 100644
--- a/drivers/media/usb/uvc/uvc_v4l2.c
+++ b/drivers/media/usb/uvc/uvc_v4l2.c
@@ -1020,8 +1020,7 @@ static int uvc_ctrl_check_access(struct uvc_video_chain *chain,
int ret = 0;
for (i = 0; i < ctrls->count; ++ctrl, ++i) {
- ret = uvc_ctrl_is_accessible(chain, ctrl->id,
- ioctl == VIDIOC_G_EXT_CTRLS);
+ ret = uvc_ctrl_is_accessible(chain, ctrl->id, ctrls, ioctl);
if (ret)
break;
}
diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index df93db259312e..a151f583cd156 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -761,7 +761,8 @@ static inline int uvc_ctrl_rollback(struct uvc_fh *handle)
int uvc_ctrl_get(struct uvc_video_chain *chain, struct v4l2_ext_control *xctrl);
int uvc_ctrl_set(struct uvc_fh *handle, struct v4l2_ext_control *xctrl);
int uvc_ctrl_is_accessible(struct uvc_video_chain *chain, u32 v4l2_id,
- bool read);
+ const struct v4l2_ext_controls *ctrls,
+ unsigned long ioctl);
int uvc_xu_ctrl_query(struct uvc_video_chain *chain,
struct uvc_xu_control_query *xqry);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 417/885] media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (415 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 416/885] media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible() Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 418/885] media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX Greg Kroah-Hartman
` (470 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Laurent Pinchart, Ricardo Ribalda,
Sasha Levin
From: Ricardo Ribalda <ribalda@chromium.org>
[ Upstream commit 40140eda661ea4be219ef194a4f43b7b5e3bbd27 ]
Replace the count with a mask field that lets us choose not only the max
value, but also the minimum value and what values are valid in between.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Stable-dep-of: 3aa8628eb78a ("media: uvcvideo: Refactor power_line_frequency_controls_limited")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/uvc/uvc_ctrl.c | 33 +++++++++++++++++++++---------
drivers/media/usb/uvc/uvc_driver.c | 4 +++-
drivers/media/usb/uvc/uvc_v4l2.c | 3 ++-
drivers/media/usb/uvc/uvcvideo.h | 2 +-
4 files changed, 29 insertions(+), 13 deletions(-)
diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
index 6f5aaaf09ee01..32c182987d52c 100644
--- a/drivers/media/usb/uvc/uvc_ctrl.c
+++ b/drivers/media/usb/uvc/uvc_ctrl.c
@@ -6,6 +6,7 @@
* Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*/
+#include <linux/bitops.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
@@ -525,7 +526,8 @@ static const struct uvc_control_mapping uvc_ctrl_mappings[] = {
.v4l2_type = V4L2_CTRL_TYPE_MENU,
.data_type = UVC_CTRL_DATA_TYPE_BITMASK,
.menu_info = exposure_auto_controls,
- .menu_count = ARRAY_SIZE(exposure_auto_controls),
+ .menu_mask = GENMASK(V4L2_EXPOSURE_APERTURE_PRIORITY,
+ V4L2_EXPOSURE_AUTO),
.slave_ids = { V4L2_CID_EXPOSURE_ABSOLUTE, },
},
{
@@ -731,7 +733,8 @@ static const struct uvc_control_mapping uvc_ctrl_mappings_uvc11[] = {
.v4l2_type = V4L2_CTRL_TYPE_MENU,
.data_type = UVC_CTRL_DATA_TYPE_ENUM,
.menu_info = power_line_frequency_controls,
- .menu_count = ARRAY_SIZE(power_line_frequency_controls) - 1,
+ .menu_mask = GENMASK(V4L2_CID_POWER_LINE_FREQUENCY_60HZ,
+ V4L2_CID_POWER_LINE_FREQUENCY_DISABLED),
},
};
@@ -745,7 +748,8 @@ static const struct uvc_control_mapping uvc_ctrl_mappings_uvc15[] = {
.v4l2_type = V4L2_CTRL_TYPE_MENU,
.data_type = UVC_CTRL_DATA_TYPE_ENUM,
.menu_info = power_line_frequency_controls,
- .menu_count = ARRAY_SIZE(power_line_frequency_controls),
+ .menu_mask = GENMASK(V4L2_CID_POWER_LINE_FREQUENCY_AUTO,
+ V4L2_CID_POWER_LINE_FREQUENCY_DISABLED),
},
};
@@ -975,7 +979,9 @@ static s32 __uvc_ctrl_get_value(struct uvc_control_mapping *mapping,
const struct uvc_menu_info *menu = mapping->menu_info;
unsigned int i;
- for (i = 0; i < mapping->menu_count; ++i, ++menu) {
+ for (i = 0; BIT(i) <= mapping->menu_mask; ++i, ++menu) {
+ if (!test_bit(i, &mapping->menu_mask))
+ continue;
if (menu->value == value) {
value = i;
break;
@@ -1209,12 +1215,14 @@ static int __uvc_query_v4l2_ctrl(struct uvc_video_chain *chain,
switch (mapping->v4l2_type) {
case V4L2_CTRL_TYPE_MENU:
- v4l2_ctrl->minimum = 0;
- v4l2_ctrl->maximum = mapping->menu_count - 1;
+ v4l2_ctrl->minimum = ffs(mapping->menu_mask) - 1;
+ v4l2_ctrl->maximum = fls(mapping->menu_mask) - 1;
v4l2_ctrl->step = 1;
menu = mapping->menu_info;
- for (i = 0; i < mapping->menu_count; ++i, ++menu) {
+ for (i = 0; BIT(i) <= mapping->menu_mask; ++i, ++menu) {
+ if (!test_bit(i, &mapping->menu_mask))
+ continue;
if (menu->value == v4l2_ctrl->default_value) {
v4l2_ctrl->default_value = i;
break;
@@ -1329,7 +1337,7 @@ int uvc_query_v4l2_menu(struct uvc_video_chain *chain,
goto done;
}
- if (query_menu->index >= mapping->menu_count) {
+ if (!test_bit(query_menu->index, &mapping->menu_mask)) {
ret = -EINVAL;
goto done;
}
@@ -1837,8 +1845,13 @@ int uvc_ctrl_set(struct uvc_fh *handle,
break;
case V4L2_CTRL_TYPE_MENU:
- if (xctrl->value < 0 || xctrl->value >= mapping->menu_count)
+ if (xctrl->value < (ffs(mapping->menu_mask) - 1) ||
+ xctrl->value > (fls(mapping->menu_mask) - 1))
return -ERANGE;
+
+ if (!test_bit(xctrl->value, &mapping->menu_mask))
+ return -EINVAL;
+
value = mapping->menu_info[xctrl->value].value;
/*
@@ -2277,7 +2290,7 @@ static int __uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
INIT_LIST_HEAD(&map->ev_subs);
- size = sizeof(*mapping->menu_info) * mapping->menu_count;
+ size = sizeof(*mapping->menu_info) * fls(mapping->menu_mask);
map->menu_info = kmemdup(mapping->menu_info, size, GFP_KERNEL);
if (map->menu_info == NULL) {
kfree(map->name);
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 215fb483efb00..d6dcd78b434ac 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -7,6 +7,7 @@
*/
#include <linux/atomic.h>
+#include <linux/bits.h>
#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/list.h>
@@ -2387,7 +2388,8 @@ static const struct uvc_control_mapping uvc_ctrl_power_line_mapping_limited = {
.v4l2_type = V4L2_CTRL_TYPE_MENU,
.data_type = UVC_CTRL_DATA_TYPE_ENUM,
.menu_info = power_line_frequency_controls_limited,
- .menu_count = ARRAY_SIZE(power_line_frequency_controls_limited),
+ .menu_mask =
+ GENMASK(ARRAY_SIZE(power_line_frequency_controls_limited) - 1, 0),
};
static const struct uvc_device_info uvc_ctrl_power_line_limited = {
diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c
index 3edb54c086b24..0774a11360c03 100644
--- a/drivers/media/usb/uvc/uvc_v4l2.c
+++ b/drivers/media/usb/uvc/uvc_v4l2.c
@@ -6,6 +6,7 @@
* Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*/
+#include <linux/bits.h>
#include <linux/compat.h>
#include <linux/kernel.h>
#include <linux/list.h>
@@ -80,7 +81,7 @@ static int uvc_ioctl_ctrl_map(struct uvc_video_chain *chain,
goto free_map;
}
- map->menu_count = xmap->menu_count;
+ map->menu_mask = GENMASK(xmap->menu_count - 1, 0);
break;
default:
diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index a151f583cd156..f75e5864bbf72 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -117,7 +117,7 @@ struct uvc_control_mapping {
u32 data_type;
const struct uvc_menu_info *menu_info;
- u32 menu_count;
+ unsigned long menu_mask;
u32 master_id;
s32 master_manual;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 418/885] media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (416 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 417/885] media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 419/885] media: uvcvideo: Refactor power_line_frequency_controls_limited Greg Kroah-Hartman
` (469 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ricardo Ribalda, Laurent Pinchart,
Sasha Levin
From: Ricardo Ribalda <ribalda@chromium.org>
[ Upstream commit 96a160b068e09b4ed5a32e2179e5219fc3545eca ]
Convert the array of structs into an array of pointers, that way the
mappings can be reused.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Stable-dep-of: 3aa8628eb78a ("media: uvcvideo: Refactor power_line_frequency_controls_limited")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/uvc/uvc_ctrl.c | 74 ++++++++++++++++----------------
1 file changed, 37 insertions(+), 37 deletions(-)
diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
index 32c182987d52c..3c46c33b9e571 100644
--- a/drivers/media/usb/uvc/uvc_ctrl.c
+++ b/drivers/media/usb/uvc/uvc_ctrl.c
@@ -723,34 +723,40 @@ static const struct uvc_control_mapping uvc_ctrl_mappings[] = {
},
};
-static const struct uvc_control_mapping uvc_ctrl_mappings_uvc11[] = {
- {
- .id = V4L2_CID_POWER_LINE_FREQUENCY,
- .entity = UVC_GUID_UVC_PROCESSING,
- .selector = UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
- .size = 2,
- .offset = 0,
- .v4l2_type = V4L2_CTRL_TYPE_MENU,
- .data_type = UVC_CTRL_DATA_TYPE_ENUM,
- .menu_info = power_line_frequency_controls,
- .menu_mask = GENMASK(V4L2_CID_POWER_LINE_FREQUENCY_60HZ,
- V4L2_CID_POWER_LINE_FREQUENCY_DISABLED),
- },
+static const struct uvc_control_mapping uvc_ctrl_power_line_mapping_uvc11 = {
+ .id = V4L2_CID_POWER_LINE_FREQUENCY,
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
+ .size = 2,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_MENU,
+ .data_type = UVC_CTRL_DATA_TYPE_ENUM,
+ .menu_info = power_line_frequency_controls,
+ .menu_mask = GENMASK(V4L2_CID_POWER_LINE_FREQUENCY_60HZ,
+ V4L2_CID_POWER_LINE_FREQUENCY_DISABLED),
};
-static const struct uvc_control_mapping uvc_ctrl_mappings_uvc15[] = {
- {
- .id = V4L2_CID_POWER_LINE_FREQUENCY,
- .entity = UVC_GUID_UVC_PROCESSING,
- .selector = UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
- .size = 2,
- .offset = 0,
- .v4l2_type = V4L2_CTRL_TYPE_MENU,
- .data_type = UVC_CTRL_DATA_TYPE_ENUM,
- .menu_info = power_line_frequency_controls,
- .menu_mask = GENMASK(V4L2_CID_POWER_LINE_FREQUENCY_AUTO,
- V4L2_CID_POWER_LINE_FREQUENCY_DISABLED),
- },
+static const struct uvc_control_mapping *uvc_ctrl_mappings_uvc11[] = {
+ &uvc_ctrl_power_line_mapping_uvc11,
+ NULL, /* Sentinel */
+};
+
+static const struct uvc_control_mapping uvc_ctrl_power_line_mapping_uvc15 = {
+ .id = V4L2_CID_POWER_LINE_FREQUENCY,
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
+ .size = 2,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_MENU,
+ .data_type = UVC_CTRL_DATA_TYPE_ENUM,
+ .menu_info = power_line_frequency_controls,
+ .menu_mask = GENMASK(V4L2_CID_POWER_LINE_FREQUENCY_AUTO,
+ V4L2_CID_POWER_LINE_FREQUENCY_DISABLED),
+};
+
+static const struct uvc_control_mapping *uvc_ctrl_mappings_uvc15[] = {
+ &uvc_ctrl_power_line_mapping_uvc15,
+ NULL, /* Sentinel */
};
/* ------------------------------------------------------------------------
@@ -2474,8 +2480,7 @@ static void uvc_ctrl_prune_entity(struct uvc_device *dev,
static void uvc_ctrl_init_ctrl(struct uvc_video_chain *chain,
struct uvc_control *ctrl)
{
- const struct uvc_control_mapping *mappings;
- unsigned int num_mappings;
+ const struct uvc_control_mapping **mappings;
unsigned int i;
/*
@@ -2542,16 +2547,11 @@ static void uvc_ctrl_init_ctrl(struct uvc_video_chain *chain,
}
/* Finally process version-specific mappings. */
- if (chain->dev->uvc_version < 0x0150) {
- mappings = uvc_ctrl_mappings_uvc11;
- num_mappings = ARRAY_SIZE(uvc_ctrl_mappings_uvc11);
- } else {
- mappings = uvc_ctrl_mappings_uvc15;
- num_mappings = ARRAY_SIZE(uvc_ctrl_mappings_uvc15);
- }
+ mappings = chain->dev->uvc_version < 0x0150
+ ? uvc_ctrl_mappings_uvc11 : uvc_ctrl_mappings_uvc15;
- for (i = 0; i < num_mappings; ++i) {
- const struct uvc_control_mapping *mapping = &mappings[i];
+ for (i = 0; mappings[i]; ++i) {
+ const struct uvc_control_mapping *mapping = mappings[i];
if (uvc_entity_match_guid(ctrl->entity, mapping->entity) &&
ctrl->info.selector == mapping->selector)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 419/885] media: uvcvideo: Refactor power_line_frequency_controls_limited
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (417 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 418/885] media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 420/885] coresight: etm4x: Fix accesses to TRCSEQRSTEVR and TRCSEQSTR Greg Kroah-Hartman
` (468 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ricardo Ribalda, Laurent Pinchart,
Sasha Levin
From: Ricardo Ribalda <ribalda@chromium.org>
[ Upstream commit 3aa8628eb78a63d0bf93e159846e9c92bccc8f69 ]
Move the control mapping to uvc_ctrl.c. This way we do not have
references to UVC controls or V4L2 controls in uvc_driver.c.
This also fixes a bug introduced in commit 382075604a68 ("media:
uvcvideo: Limit power line control for Quanta UVC Webcam"). The
offending commit caused the power line control menu entries to have
incorrect indices compared to the V4L2_CID_POWER_LINE_FREQUENCY_*
enumeration. Now that the limited mapping reuses the correct menu_info
array, the indices correctly map to the V4L2 control specification.
Fixes: 382075604a68 ("media: uvcvideo: Limit power line control for Quanta UVC Webcam")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/uvc/uvc_ctrl.c | 13 +++++++++++++
drivers/media/usb/uvc/uvc_driver.c | 18 ------------------
drivers/media/usb/uvc/uvcvideo.h | 1 +
3 files changed, 14 insertions(+), 18 deletions(-)
diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
index 3c46c33b9e571..44b0cfb8ee1c7 100644
--- a/drivers/media/usb/uvc/uvc_ctrl.c
+++ b/drivers/media/usb/uvc/uvc_ctrl.c
@@ -723,6 +723,19 @@ static const struct uvc_control_mapping uvc_ctrl_mappings[] = {
},
};
+const struct uvc_control_mapping uvc_ctrl_power_line_mapping_limited = {
+ .id = V4L2_CID_POWER_LINE_FREQUENCY,
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
+ .size = 2,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_MENU,
+ .data_type = UVC_CTRL_DATA_TYPE_ENUM,
+ .menu_info = power_line_frequency_controls,
+ .menu_mask = GENMASK(V4L2_CID_POWER_LINE_FREQUENCY_60HZ,
+ V4L2_CID_POWER_LINE_FREQUENCY_50HZ),
+};
+
static const struct uvc_control_mapping uvc_ctrl_power_line_mapping_uvc11 = {
.id = V4L2_CID_POWER_LINE_FREQUENCY,
.entity = UVC_GUID_UVC_PROCESSING,
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index d6dcd78b434ac..abfe735f6ea30 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -2374,24 +2374,6 @@ MODULE_PARM_DESC(timeout, "Streaming control requests timeout");
* Driver initialization and cleanup
*/
-static const struct uvc_menu_info power_line_frequency_controls_limited[] = {
- { 1, "50 Hz" },
- { 2, "60 Hz" },
-};
-
-static const struct uvc_control_mapping uvc_ctrl_power_line_mapping_limited = {
- .id = V4L2_CID_POWER_LINE_FREQUENCY,
- .entity = UVC_GUID_UVC_PROCESSING,
- .selector = UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
- .size = 2,
- .offset = 0,
- .v4l2_type = V4L2_CTRL_TYPE_MENU,
- .data_type = UVC_CTRL_DATA_TYPE_ENUM,
- .menu_info = power_line_frequency_controls_limited,
- .menu_mask =
- GENMASK(ARRAY_SIZE(power_line_frequency_controls_limited) - 1, 0),
-};
-
static const struct uvc_device_info uvc_ctrl_power_line_limited = {
.mappings = (const struct uvc_control_mapping *[]) {
&uvc_ctrl_power_line_mapping_limited,
diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index f75e5864bbf72..1227ae63f85b7 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -728,6 +728,7 @@ int uvc_status_start(struct uvc_device *dev, gfp_t flags);
void uvc_status_stop(struct uvc_device *dev);
/* Controls */
+extern const struct uvc_control_mapping uvc_ctrl_power_line_mapping_limited;
extern const struct v4l2_subscribed_event_ops uvc_ctrl_sub_ev_ops;
int uvc_query_v4l2_ctrl(struct uvc_video_chain *chain,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 420/885] coresight: etm4x: Fix accesses to TRCSEQRSTEVR and TRCSEQSTR
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (418 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 419/885] media: uvcvideo: Refactor power_line_frequency_controls_limited Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 421/885] coresight: cti: Prevent negative values of enable count Greg Kroah-Hartman
` (467 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Junhao He, Mike Leach,
Anshuman Khandual, Suzuki K Poulose, Sasha Levin
From: Junhao He <hejunhao3@huawei.com>
[ Upstream commit 589d928248b72f8377d45904a14bcf686aa8bbeb ]
The TRCSEQRSTEVR and TRCSEQSTR registers are not implemented if the
TRCIDR5.NUMSEQSTATE == 0. Skip accessing the registers in such cases.
Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114091632.60095-1-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../hwtracing/coresight/coresight-etm4x-core.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index 80fefaba58eeb..c7a65d1524fcb 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -424,8 +424,10 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
etm4x_relaxed_write32(csa, config->vipcssctlr, TRCVIPCSSCTLR);
for (i = 0; i < drvdata->nrseqstate - 1; i++)
etm4x_relaxed_write32(csa, config->seq_ctrl[i], TRCSEQEVRn(i));
- etm4x_relaxed_write32(csa, config->seq_rst, TRCSEQRSTEVR);
- etm4x_relaxed_write32(csa, config->seq_state, TRCSEQSTR);
+ if (drvdata->nrseqstate) {
+ etm4x_relaxed_write32(csa, config->seq_rst, TRCSEQRSTEVR);
+ etm4x_relaxed_write32(csa, config->seq_state, TRCSEQSTR);
+ }
etm4x_relaxed_write32(csa, config->ext_inp, TRCEXTINSELR);
for (i = 0; i < drvdata->nr_cntr; i++) {
etm4x_relaxed_write32(csa, config->cntrldvr[i], TRCCNTRLDVRn(i));
@@ -1631,8 +1633,10 @@ static int __etm4_cpu_save(struct etmv4_drvdata *drvdata)
for (i = 0; i < drvdata->nrseqstate - 1; i++)
state->trcseqevr[i] = etm4x_read32(csa, TRCSEQEVRn(i));
- state->trcseqrstevr = etm4x_read32(csa, TRCSEQRSTEVR);
- state->trcseqstr = etm4x_read32(csa, TRCSEQSTR);
+ if (drvdata->nrseqstate) {
+ state->trcseqrstevr = etm4x_read32(csa, TRCSEQRSTEVR);
+ state->trcseqstr = etm4x_read32(csa, TRCSEQSTR);
+ }
state->trcextinselr = etm4x_read32(csa, TRCEXTINSELR);
for (i = 0; i < drvdata->nr_cntr; i++) {
@@ -1760,8 +1764,10 @@ static void __etm4_cpu_restore(struct etmv4_drvdata *drvdata)
for (i = 0; i < drvdata->nrseqstate - 1; i++)
etm4x_relaxed_write32(csa, state->trcseqevr[i], TRCSEQEVRn(i));
- etm4x_relaxed_write32(csa, state->trcseqrstevr, TRCSEQRSTEVR);
- etm4x_relaxed_write32(csa, state->trcseqstr, TRCSEQSTR);
+ if (drvdata->nrseqstate) {
+ etm4x_relaxed_write32(csa, state->trcseqrstevr, TRCSEQRSTEVR);
+ etm4x_relaxed_write32(csa, state->trcseqstr, TRCSEQSTR);
+ }
etm4x_relaxed_write32(csa, state->trcextinselr, TRCEXTINSELR);
for (i = 0; i < drvdata->nr_cntr; i++) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 421/885] coresight: cti: Prevent negative values of enable count
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (419 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 420/885] coresight: etm4x: Fix accesses to TRCSEQRSTEVR and TRCSEQSTR Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 422/885] coresight: cti: Add PM runtime call in enable_store Greg Kroah-Hartman
` (466 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jinlong Mao, James Clark,
Mike Leach, Suzuki K Poulose, Sasha Levin
From: James Clark <james.clark@arm.com>
[ Upstream commit 3244fb6dbbf1ffc114cdf382cc167bdd8c18088a ]
Writing 0 to the enable control repeatedly results in a negative value
for enable_req_count. After this, writing 1 to the enable control
appears to not work until the count returns to positive.
Change it so that it's impossible for enable_req_count to be < 0.
Return an error to indicate that the disable request was invalid.
Fixes: 835d722ba10a ("coresight: cti: Initial CoreSight CTI Driver")
Tested-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-2-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwtracing/coresight/coresight-cti-core.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-cti-core.c b/drivers/hwtracing/coresight/coresight-cti-core.c
index d2cf4f4848e1b..838872f2484d3 100644
--- a/drivers/hwtracing/coresight/coresight-cti-core.c
+++ b/drivers/hwtracing/coresight/coresight-cti-core.c
@@ -151,9 +151,16 @@ static int cti_disable_hw(struct cti_drvdata *drvdata)
{
struct cti_config *config = &drvdata->config;
struct coresight_device *csdev = drvdata->csdev;
+ int ret = 0;
spin_lock(&drvdata->spinlock);
+ /* don't allow negative refcounts, return an error */
+ if (!atomic_read(&drvdata->config.enable_req_count)) {
+ ret = -EINVAL;
+ goto cti_not_disabled;
+ }
+
/* check refcount - disable on 0 */
if (atomic_dec_return(&drvdata->config.enable_req_count) > 0)
goto cti_not_disabled;
@@ -171,12 +178,12 @@ static int cti_disable_hw(struct cti_drvdata *drvdata)
coresight_disclaim_device_unlocked(csdev);
CS_LOCK(drvdata->base);
spin_unlock(&drvdata->spinlock);
- return 0;
+ return ret;
/* not disabled this call */
cti_not_disabled:
spin_unlock(&drvdata->spinlock);
- return 0;
+ return ret;
}
void cti_write_single_reg(struct cti_drvdata *drvdata, int offset, u32 value)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 422/885] coresight: cti: Add PM runtime call in enable_store
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (420 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 421/885] coresight: cti: Prevent negative values of enable count Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 423/885] usb: typec: intel_pmc_mux: Dont leak the ACPI device reference count Greg Kroah-Hartman
` (465 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mao Jinlong, James Clark,
Suzuki K Poulose, Sasha Levin
From: Mao Jinlong <quic_jinlmao@quicinc.com>
[ Upstream commit eff674a9b86a6ffdd10c3af3863545acf7f1ce4f ]
In commit 6746eae4bbad ("coresight: cti: Fix hang in cti_disable_hw()")
PM runtime calls are removed from cti_enable_hw/cti_disable_hw. When
enabling CTI by writing enable sysfs node, clock for accessing CTI
register won't be enabled. Device will crash due to register access
issue. Add PM runtime call in enable_store to fix this issue.
Fixes: 6746eae4bbad ("coresight: cti: Fix hang in cti_disable_hw()")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
[Change to only call pm_runtime_put if a disable happened]
Tested-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-3-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwtracing/coresight/coresight-cti-sysfs.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-cti-sysfs.c b/drivers/hwtracing/coresight/coresight-cti-sysfs.c
index 6d59c815ecf5e..71e7a8266bb32 100644
--- a/drivers/hwtracing/coresight/coresight-cti-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-cti-sysfs.c
@@ -108,10 +108,19 @@ static ssize_t enable_store(struct device *dev,
if (ret)
return ret;
- if (val)
+ if (val) {
+ ret = pm_runtime_resume_and_get(dev->parent);
+ if (ret)
+ return ret;
ret = cti_enable(drvdata->csdev);
- else
+ if (ret)
+ pm_runtime_put(dev->parent);
+ } else {
ret = cti_disable(drvdata->csdev);
+ if (!ret)
+ pm_runtime_put(dev->parent);
+ }
+
if (ret)
return ret;
return size;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 423/885] usb: typec: intel_pmc_mux: Dont leak the ACPI device reference count
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (421 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 422/885] coresight: cti: Add PM runtime call in enable_store Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 424/885] PCI/IOV: Enlarge virtfn sysfs name buffer Greg Kroah-Hartman
` (464 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko, Heikki Krogerus,
Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit c3194949ae8fcbe2b7e38670e7c6a5cfd2605edc ]
When acpi_dev_get_memory_resources() fails, the reference count is
left bumped. Drop it as it's done in the other error paths.
Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230102202933.15968-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/typec/mux/intel_pmc_mux.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index fdbf3694e21f4..87e2c91306070 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -614,8 +614,10 @@ static int pmc_usb_probe_iom(struct pmc_usb *pmc)
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_memory_resources(adev, &resource_list);
- if (ret < 0)
+ if (ret < 0) {
+ acpi_dev_put(adev);
return ret;
+ }
rentry = list_first_entry_or_null(&resource_list, struct resource_entry, node);
if (rentry)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 424/885] PCI/IOV: Enlarge virtfn sysfs name buffer
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (422 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 423/885] usb: typec: intel_pmc_mux: Dont leak the ACPI device reference count Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 425/885] PCI: switchtec: Return -EFAULT for copy_to_user() errors Greg Kroah-Hartman
` (463 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexey V. Vissarionov,
Bjorn Helgaas, Sasha Levin
From: Alexey V. Vissarionov <gremlin@altlinux.org>
[ Upstream commit ea0b5aa5f184cf8293c93163f0fb00505190d431 ]
The sysfs link name "virtfn%u" constructed by pci_iov_sysfs_link() requires
17 bytes to contain the longest possible string. Increase VIRTFN_ID_LEN to
accommodate that.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[bhelgaas: commit log, comment at #define]
Fixes: dd7cc44d0bce ("PCI: add SR-IOV API for Physical Function driver")
Link: https://lore.kernel.org/r/20221218033347.23743-1-gremlin@altlinux.org
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/iov.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 952217572113c..b2e8322755c17 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -14,7 +14,7 @@
#include <linux/delay.h>
#include "pci.h"
-#define VIRTFN_ID_LEN 16
+#define VIRTFN_ID_LEN 17 /* "virtfn%u\0" for 2^32 - 1 */
int pci_iov_virtfn_bus(struct pci_dev *dev, int vf_id)
{
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 425/885] PCI: switchtec: Return -EFAULT for copy_to_user() errors
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (423 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 424/885] PCI/IOV: Enlarge virtfn sysfs name buffer Greg Kroah-Hartman
@ 2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 426/885] PCI: endpoint: pci-epf-vntb: Clean up kernel_doc warning Greg Kroah-Hartman
` (462 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:55 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bjorn Helgaas, Logan Gunthorpe, Sasha Levin
From: Bjorn Helgaas <bhelgaas@google.com>
[ Upstream commit ddc10938e08cd7aac63d8385f7305f7889df5179 ]
switchtec_dev_read() didn't handle copy_to_user() errors correctly: it
assigned "rc = -EFAULT", but actually returned either "size", -ENXIO, or
-EBADMSG instead.
Update the failure cases to unlock mrpc_mutex and return -EFAULT directly.
Link: https://lore.kernel.org/r/20221216162126.207863-3-helgaas@kernel.org
Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/switch/switchtec.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 75be4fe225090..0c1faa6c1973a 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -606,21 +606,20 @@ static ssize_t switchtec_dev_read(struct file *filp, char __user *data,
rc = copy_to_user(data, &stuser->return_code,
sizeof(stuser->return_code));
if (rc) {
- rc = -EFAULT;
- goto out;
+ mutex_unlock(&stdev->mrpc_mutex);
+ return -EFAULT;
}
data += sizeof(stuser->return_code);
rc = copy_to_user(data, &stuser->data,
size - sizeof(stuser->return_code));
if (rc) {
- rc = -EFAULT;
- goto out;
+ mutex_unlock(&stdev->mrpc_mutex);
+ return -EFAULT;
}
stuser_set_state(stuser, MRPC_IDLE);
-out:
mutex_unlock(&stdev->mrpc_mutex);
if (stuser->status == SWITCHTEC_MRPC_STATUS_DONE ||
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 426/885] PCI: endpoint: pci-epf-vntb: Clean up kernel_doc warning
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (424 preceding siblings ...)
2023-03-07 16:55 ` [PATCH 6.1 425/885] PCI: switchtec: Return -EFAULT for copy_to_user() errors Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 427/885] PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc Greg Kroah-Hartman
` (461 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Frank Li, Lorenzo Pieralisi,
Manivannan Sadhasivam, Sasha Levin
From: Frank Li <frank.li@nxp.com>
[ Upstream commit 9298804840457c29c7e115f3a87bec406c262c81 ]
Cleanup warning found by scripts/kernel-doc.
Consolidate terms:
- host, host1 to HOST
- vhost, vHost, Vhost, VHOST2 to VHOST
Link: https://lore.kernel.org/r/20221102141014.1025893-2-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Stable-dep-of: fd858402c6d0 ("PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/endpoint/functions/pci-epf-vntb.c | 83 ++++++++++++-------
1 file changed, 54 insertions(+), 29 deletions(-)
diff --git a/drivers/pci/endpoint/functions/pci-epf-vntb.c b/drivers/pci/endpoint/functions/pci-epf-vntb.c
index fba0179939b8f..36a83f0c28810 100644
--- a/drivers/pci/endpoint/functions/pci-epf-vntb.c
+++ b/drivers/pci/endpoint/functions/pci-epf-vntb.c
@@ -11,7 +11,7 @@
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*/
-/**
+/*
* +------------+ +---------------------------------------+
* | | | |
* +------------+ | +--------------+
@@ -156,12 +156,14 @@ static struct pci_epf_header epf_ntb_header = {
};
/**
- * epf_ntb_link_up() - Raise link_up interrupt to Virtual Host
+ * epf_ntb_link_up() - Raise link_up interrupt to Virtual Host (VHOST)
* @ntb: NTB device that facilitates communication between HOST and VHOST
* @link_up: true or false indicating Link is UP or Down
*
* Once NTB function in HOST invoke ntb_link_enable(),
- * this NTB function driver will trigger a link event to vhost.
+ * this NTB function driver will trigger a link event to VHOST.
+ *
+ * Returns: Zero for success, or an error code in case of failure
*/
static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
{
@@ -175,9 +177,9 @@ static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
}
/**
- * epf_ntb_configure_mw() - Configure the Outbound Address Space for vhost
- * to access the memory window of host
- * @ntb: NTB device that facilitates communication between host and vhost
+ * epf_ntb_configure_mw() - Configure the Outbound Address Space for VHOST
+ * to access the memory window of HOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
* @mw: Index of the memory window (either 0, 1, 2 or 3)
*
* EP Outbound Window
@@ -194,7 +196,9 @@ static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
* | | | |
* | | | |
* +--------+ +-----------+
- * VHost PCI EP
+ * VHOST PCI EP
+ *
+ * Returns: Zero for success, or an error code in case of failure
*/
static int epf_ntb_configure_mw(struct epf_ntb *ntb, u32 mw)
{
@@ -219,7 +223,7 @@ static int epf_ntb_configure_mw(struct epf_ntb *ntb, u32 mw)
/**
* epf_ntb_teardown_mw() - Teardown the configured OB ATU
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
* @mw: Index of the memory window (either 0, 1, 2 or 3)
*
* Teardown the configured OB ATU configured in epf_ntb_configure_mw() using
@@ -234,12 +238,12 @@ static void epf_ntb_teardown_mw(struct epf_ntb *ntb, u32 mw)
}
/**
- * epf_ntb_cmd_handler() - Handle commands provided by the NTB Host
+ * epf_ntb_cmd_handler() - Handle commands provided by the NTB HOST
* @work: work_struct for the epf_ntb_epc
*
* Workqueue function that gets invoked for the two epf_ntb_epc
* periodically (once every 5ms) to see if it has received any commands
- * from NTB host. The host can send commands to configure doorbell or
+ * from NTB HOST. The HOST can send commands to configure doorbell or
* configure memory window or to update link status.
*/
static void epf_ntb_cmd_handler(struct work_struct *work)
@@ -321,8 +325,8 @@ static void epf_ntb_cmd_handler(struct work_struct *work)
/**
* epf_ntb_config_sspad_bar_clear() - Clear Config + Self scratchpad BAR
- * @ntb_epc: EPC associated with one of the HOST which holds peer's outbound
- * address.
+ * @ntb: EPC associated with one of the HOST which holds peer's outbound
+ * address.
*
* Clear BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
* self scratchpad region (removes inbound ATU configuration). While BAR0 is
@@ -331,8 +335,10 @@ static void epf_ntb_cmd_handler(struct work_struct *work)
* used for self scratchpad from epf_ntb_bar[BAR_CONFIG].
*
* Please note the self scratchpad region and config region is combined to
- * a single region and mapped using the same BAR. Also note HOST2's peer
- * scratchpad is HOST1's self scratchpad.
+ * a single region and mapped using the same BAR. Also note VHOST's peer
+ * scratchpad is HOST's self scratchpad.
+ *
+ * Returns: void
*/
static void epf_ntb_config_sspad_bar_clear(struct epf_ntb *ntb)
{
@@ -347,13 +353,15 @@ static void epf_ntb_config_sspad_bar_clear(struct epf_ntb *ntb)
/**
* epf_ntb_config_sspad_bar_set() - Set Config + Self scratchpad BAR
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
*
- * Map BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
+ * Map BAR0 of EP CONTROLLER which contains the VHOST's config and
* self scratchpad region.
*
* Please note the self scratchpad region and config region is combined to
* a single region and mapped using the same BAR.
+ *
+ * Returns: Zero for success, or an error code in case of failure
*/
static int epf_ntb_config_sspad_bar_set(struct epf_ntb *ntb)
{
@@ -380,7 +388,7 @@ static int epf_ntb_config_sspad_bar_set(struct epf_ntb *ntb)
/**
* epf_ntb_config_spad_bar_free() - Free the physical memory associated with
* config + scratchpad region
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
*/
static void epf_ntb_config_spad_bar_free(struct epf_ntb *ntb)
{
@@ -393,11 +401,13 @@ static void epf_ntb_config_spad_bar_free(struct epf_ntb *ntb)
/**
* epf_ntb_config_spad_bar_alloc() - Allocate memory for config + scratchpad
* region
- * @ntb: NTB device that facilitates communication between HOST1 and HOST2
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
*
* Allocate the Local Memory mentioned in the above diagram. The size of
* CONFIG REGION is sizeof(struct epf_ntb_ctrl) and size of SCRATCHPAD REGION
* is obtained from "spad-count" configfs entry.
+ *
+ * Returns: Zero for success, or an error code in case of failure
*/
static int epf_ntb_config_spad_bar_alloc(struct epf_ntb *ntb)
{
@@ -465,11 +475,13 @@ static int epf_ntb_config_spad_bar_alloc(struct epf_ntb *ntb)
}
/**
- * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capability
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
*
* Configure MSI/MSI-X capability for each interface with number of
* interrupts equal to "db_count" configfs entry.
+ *
+ * Returns: Zero for success, or an error code in case of failure
*/
static int epf_ntb_configure_interrupt(struct epf_ntb *ntb)
{
@@ -511,7 +523,9 @@ static int epf_ntb_configure_interrupt(struct epf_ntb *ntb)
/**
* epf_ntb_db_bar_init() - Configure Doorbell window BARs
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
+ *
+ * Returns: Zero for success, or an error code in case of failure
*/
static int epf_ntb_db_bar_init(struct epf_ntb *ntb)
{
@@ -566,7 +580,7 @@ static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws);
/**
* epf_ntb_db_bar_clear() - Clear doorbell BAR and free memory
* allocated in peer's outbound address space
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
*/
static void epf_ntb_db_bar_clear(struct epf_ntb *ntb)
{
@@ -582,8 +596,9 @@ static void epf_ntb_db_bar_clear(struct epf_ntb *ntb)
/**
* epf_ntb_mw_bar_init() - Configure Memory window BARs
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
*
+ * Returns: Zero for success, or an error code in case of failure
*/
static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
{
@@ -639,7 +654,7 @@ static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
/**
* epf_ntb_mw_bar_clear() - Clear Memory window BARs
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
*/
static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws)
{
@@ -662,7 +677,7 @@ static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws)
/**
* epf_ntb_epc_destroy() - Cleanup NTB EPC interface
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
*
* Wrapper for epf_ntb_epc_destroy_interface() to cleanup all the NTB interfaces
*/
@@ -675,7 +690,9 @@ static void epf_ntb_epc_destroy(struct epf_ntb *ntb)
/**
* epf_ntb_init_epc_bar() - Identify BARs to be used for each of the NTB
* constructs (scratchpad region, doorbell, memorywindow)
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
+ *
+ * Returns: Zero for success, or an error code in case of failure
*/
static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
{
@@ -716,11 +733,13 @@ static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
/**
* epf_ntb_epc_init() - Initialize NTB interface
- * @ntb: NTB device that facilitates communication between HOST and vHOST2
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
*
* Wrapper to initialize a particular EPC interface and start the workqueue
- * to check for commands from host. This function will write to the
+ * to check for commands from HOST. This function will write to the
* EP controller HW for configuring it.
+ *
+ * Returns: Zero for success, or an error code in case of failure
*/
static int epf_ntb_epc_init(struct epf_ntb *ntb)
{
@@ -787,7 +806,7 @@ static int epf_ntb_epc_init(struct epf_ntb *ntb)
/**
* epf_ntb_epc_cleanup() - Cleanup all NTB interfaces
- * @ntb: NTB device that facilitates communication between HOST1 and HOST2
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
*
* Wrapper to cleanup all NTB interfaces.
*/
@@ -951,6 +970,8 @@ static const struct config_item_type ntb_group_type = {
*
* Add configfs directory specific to NTB. This directory will hold
* NTB specific properties like db_count, spad_count, num_mws etc.,
+ *
+ * Returns: Pointer to config_group
*/
static struct config_group *epf_ntb_add_cfs(struct pci_epf *epf,
struct config_group *group)
@@ -1292,6 +1313,8 @@ static struct pci_driver vntb_pci_driver = {
* Invoked when a primary interface or secondary interface is bound to EPC
* device. This function will succeed only when EPC is bound to both the
* interfaces.
+ *
+ * Returns: Zero for success, or an error code in case of failure
*/
static int epf_ntb_bind(struct pci_epf *epf)
{
@@ -1377,6 +1400,8 @@ static struct pci_epf_ops epf_ntb_ops = {
*
* Probe NTB function driver when endpoint function bus detects a NTB
* endpoint function.
+ *
+ * Returns: Zero for success, or an error code in case of failure
*/
static int epf_ntb_probe(struct pci_epf *epf)
{
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 427/885] PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (425 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 426/885] PCI: endpoint: pci-epf-vntb: Clean up kernel_doc warning Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 428/885] hwtracing: hisi_ptt: Only add the supported devices to the filters list Greg Kroah-Hartman
` (460 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Bjorn Helgaas, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit fd858402c6d0a80e0b543886b9f7865c6d76d5d6 ]
8e4bfbe644a6 ("PCI: endpoint: pci-epf-vntb: fix error handle in
epf_ntb_mw_bar_init()") added a "num_mws" parameter to
epf_ntb_mw_bar_clear() but failed to add kernel-doc for num_mws.
Add kernel-doc for num_mws on epf_ntb_mw_bar_clear().
Fixes: 8e4bfbe644a6 ("PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()")
Link: https://lore.kernel.org/r/20230103024907.293853-1-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/endpoint/functions/pci-epf-vntb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pci/endpoint/functions/pci-epf-vntb.c b/drivers/pci/endpoint/functions/pci-epf-vntb.c
index 36a83f0c28810..8c6931210ac4d 100644
--- a/drivers/pci/endpoint/functions/pci-epf-vntb.c
+++ b/drivers/pci/endpoint/functions/pci-epf-vntb.c
@@ -655,6 +655,7 @@ static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
/**
* epf_ntb_mw_bar_clear() - Clear Memory window BARs
* @ntb: NTB device that facilitates communication between HOST and VHOST
+ * @num_mws: the number of Memory window BARs that to be cleared
*/
static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws)
{
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 428/885] hwtracing: hisi_ptt: Only add the supported devices to the filters list
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (426 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 427/885] PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 429/885] tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown() Greg Kroah-Hartman
` (459 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yicong Yang, Jonathan Cameron,
Suzuki K Poulose, Sasha Levin
From: Yicong Yang <yangyicong@hisilicon.com>
[ Upstream commit b8d976c7d41a28c0fccf22c7113be9a29dc07e5c ]
The PTT device can only support the devices on the same PCIe core,
within BDF range [lower_bdf, upper_bdf]. It's not correct to assume
the devices on the root bus are from the same PCIe core, there are
cases that root ports from different PCIe core are sharing the same
bus. So check when initializing the filters list.
Fixes: ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230112112201.16283-1-yangyicong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwtracing/ptt/hisi_ptt.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
index 5d5526aa60c40..30f1525639b57 100644
--- a/drivers/hwtracing/ptt/hisi_ptt.c
+++ b/drivers/hwtracing/ptt/hisi_ptt.c
@@ -356,8 +356,18 @@ static int hisi_ptt_register_irq(struct hisi_ptt *hisi_ptt)
static int hisi_ptt_init_filters(struct pci_dev *pdev, void *data)
{
+ struct pci_dev *root_port = pcie_find_root_port(pdev);
struct hisi_ptt_filter_desc *filter;
struct hisi_ptt *hisi_ptt = data;
+ u32 port_devid;
+
+ if (!root_port)
+ return 0;
+
+ port_devid = PCI_DEVID(root_port->bus->number, root_port->devfn);
+ if (port_devid < hisi_ptt->lower_bdf ||
+ port_devid > hisi_ptt->upper_bdf)
+ return 0;
/*
* We won't fail the probe if filter allocation failed here. The filters
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 429/885] tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (427 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 428/885] hwtracing: hisi_ptt: Only add the supported devices to the filters list Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 430/885] tty: serial: fsl_lpuart: clear LPUART Status Register " Greg Kroah-Hartman
` (458 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Sherry Sun, Sasha Levin
From: Sherry Sun <sherry.sun@nxp.com>
[ Upstream commit 1d4bd0e4ae4ba95892bef919a8d4d3f08f122d7e ]
UARTBAUD_RDMAE and UARTBAUD_TDMAE are enabled in lpuart32_startup(), but
lpuart32_shutdown() not disable them, only free the dma ring buffer and
release the dma channels, so here disable the Rx/Tx DMA first in
lpuart32_shutdown().
Fixes: 42b68768e51b ("serial: fsl_lpuart: DMA support for 32-bit variant")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20221125101953.18753-3-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/fsl_lpuart.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 888e01fbd9c5f..262b059e3ee11 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1791,6 +1791,11 @@ static void lpuart32_shutdown(struct uart_port *port)
spin_lock_irqsave(&port->lock, flags);
+ /* disable Rx/Tx DMA */
+ temp = lpuart32_read(port, UARTBAUD);
+ temp &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
+ lpuart32_write(port, temp, UARTBAUD);
+
/* disable Rx/Tx and interrupts */
temp = lpuart32_read(port, UARTCTRL);
temp &= ~(UARTCTRL_TE | UARTCTRL_RE |
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 430/885] tty: serial: fsl_lpuart: clear LPUART Status Register in lpuart32_shutdown()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (428 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 429/885] tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown() Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 431/885] tty: serial: qcom-geni-serial: stop operations in progress at shutdown Greg Kroah-Hartman
` (457 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Sherry Sun, Sasha Levin
From: Sherry Sun <sherry.sun@nxp.com>
[ Upstream commit 4029dfc034febb54f6dd8ea83568accc943bc088 ]
The LPUART Status Register needs to be cleared when closing the uart
port to get a clean environment when reopening the uart.
Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20221125101953.18753-4-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/fsl_lpuart.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 262b059e3ee11..110c8720af47a 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1791,6 +1791,10 @@ static void lpuart32_shutdown(struct uart_port *port)
spin_lock_irqsave(&port->lock, flags);
+ /* clear status */
+ temp = lpuart32_read(&sport->port, UARTSTAT);
+ lpuart32_write(&sport->port, temp, UARTSTAT);
+
/* disable Rx/Tx DMA */
temp = lpuart32_read(port, UARTBAUD);
temp &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 431/885] tty: serial: qcom-geni-serial: stop operations in progress at shutdown
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (429 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 430/885] tty: serial: fsl_lpuart: clear LPUART Status Register " Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 432/885] serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init() Greg Kroah-Hartman
` (456 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bartosz Golaszewski, Konrad Dybcio,
Sasha Levin
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[ Upstream commit d8aca2f96813d51df574a811eda9a2cbed00f261 ]
We don't stop transmissions in progress at shutdown. This is fine with
FIFO SE mode but with DMA (support for which we'll introduce later) it
causes trouble so fix it now.
Fixes: e83766334f96 ("tty: serial: qcom_geni_serial: No need to stop tx/rx on UART shutdown")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221229155030.418800-2-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/qcom_geni_serial.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 7905935b9f1b4..fd72644605e05 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -891,6 +891,8 @@ static int setup_fifos(struct qcom_geni_serial_port *port)
static void qcom_geni_serial_shutdown(struct uart_port *uport)
{
disable_irq(uport->irq);
+ qcom_geni_serial_stop_tx(uport);
+ qcom_geni_serial_stop_rx(uport);
}
static int qcom_geni_serial_port_setup(struct uart_port *uport)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 432/885] serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (430 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 431/885] tty: serial: qcom-geni-serial: stop operations in progress at shutdown Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 433/885] Revert "char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol" Greg Kroah-Hartman
` (455 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yi Yang, Sasha Levin
From: Yi Yang <yiyang13@huawei.com>
[ Upstream commit 38f28cfe9d08e3a47ef008798b275fef8118fc20 ]
Add the missing clk_disable_unprepare() before return from
tegra_uart_hw_init() in the error handling path.
When request_irq() fails in tegra_uart_startup(), 'tup->uart_clk'
has been enabled, fix it by adding clk_disable_unprepare().
Fixes: cc9ca4d95846 ("serial: tegra: Only print FIFO error message when an error occurs")
Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Link: https://lore.kernel.org/r/20221126020852.113378-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/serial-tegra.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index cda9cd4fa92c8..c08360212aa20 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1047,6 +1047,7 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
if (tup->cdata->fifo_mode_enable_status) {
ret = tegra_uart_wait_fifo_mode_enabled(tup);
if (ret < 0) {
+ clk_disable_unprepare(tup->uart_clk);
dev_err(tup->uport.dev,
"Failed to enable FIFO mode: %d\n", ret);
return ret;
@@ -1068,6 +1069,7 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
*/
ret = tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD);
if (ret < 0) {
+ clk_disable_unprepare(tup->uart_clk);
dev_err(tup->uport.dev, "Failed to set baud rate\n");
return ret;
}
@@ -1227,10 +1229,13 @@ static int tegra_uart_startup(struct uart_port *u)
dev_name(u->dev), tup);
if (ret < 0) {
dev_err(u->dev, "Failed to register ISR for IRQ %d\n", u->irq);
- goto fail_hw_init;
+ goto fail_request_irq;
}
return 0;
+fail_request_irq:
+ /* tup->uart_clk is already enabled in tegra_uart_hw_init */
+ clk_disable_unprepare(tup->uart_clk);
fail_hw_init:
if (!tup->use_rx_pio)
tegra_uart_dma_channel_free(tup, true);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 433/885] Revert "char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol"
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (431 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 432/885] serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init() Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 434/885] eeprom: idt_89hpesx: Fix error handling in idt_init() Greg Kroah-Hartman
` (454 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Duoming Zhou, Sasha Levin
From: Duoming Zhou <duoming@zju.edu.cn>
[ Upstream commit 70fae37a09268455b8ab4f64647086b61da6f39c ]
This reverts commit be826ada52f1fcabed5b5217c94609ebf5967211.
The function monitor_card() is a timer handler that runs in an
atomic context, but it calls usleep_range() that can sleep.
As a result, the sleep-in-atomic-context bugs will happen.
The process is shown below:
(atomic context)
monitor_card()
set_protocol()
usleep_range() //sleep
The origin commit c1986ee9bea3 ("[PATCH] New Omnikey Cardman
4000 driver") works fine.
Fixes: be826ada52f1 ("char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20230118141000.5580-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/pcmcia/cm4000_cs.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index adaec8fd4b16c..e656f42a28ac2 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -529,7 +529,8 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
DEBUGP(5, dev, "NumRecBytes is valid\n");
break;
}
- usleep_range(10000, 11000);
+ /* can not sleep as this is in atomic context */
+ mdelay(10);
}
if (i == 100) {
DEBUGP(5, dev, "Timeout waiting for NumRecBytes getting "
@@ -549,7 +550,8 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
}
break;
}
- usleep_range(10000, 11000);
+ /* can not sleep as this is in atomic context */
+ mdelay(10);
}
/* check whether it is a short PTS reply? */
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 434/885] eeprom: idt_89hpesx: Fix error handling in idt_init()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (432 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 433/885] Revert "char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol" Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 435/885] applicom: Fix PCI device refcount leak in applicom_init() Greg Kroah-Hartman
` (453 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yuan Can, Serge Semin, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit d717a3ab282f51ec45142f911f7ef8a55c057de5 ]
A problem about idt_89hpesx create debugfs failed is triggered with the
following log given:
[ 4973.269647] debugfs: Directory 'idt_csr' with parent '/' already present!
The reason is that idt_init() returns i2c_add_driver() directly without
checking its return value, if i2c_add_driver() failed, it returns without
destroy the newly created debugfs, resulting the debugfs of idt_csr can
never be created later.
idt_init()
debugfs_create_dir() # create debugfs directory
i2c_add_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when i2c_add_driver() returns error.
Fixes: cfad6425382e ("eeprom: Add IDT 89HPESx EEPROM/CSR driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20221110020030.47711-1-yuancan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/eeprom/idt_89hpesx.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/eeprom/idt_89hpesx.c b/drivers/misc/eeprom/idt_89hpesx.c
index bb3ed352b95f9..367054e0ced4e 100644
--- a/drivers/misc/eeprom/idt_89hpesx.c
+++ b/drivers/misc/eeprom/idt_89hpesx.c
@@ -1566,12 +1566,20 @@ static struct i2c_driver idt_driver = {
*/
static int __init idt_init(void)
{
+ int ret;
+
/* Create Debugfs directory first */
if (debugfs_initialized())
csr_dbgdir = debugfs_create_dir("idt_csr", NULL);
/* Add new i2c-device driver */
- return i2c_add_driver(&idt_driver);
+ ret = i2c_add_driver(&idt_driver);
+ if (ret) {
+ debugfs_remove_recursive(csr_dbgdir);
+ return ret;
+ }
+
+ return 0;
}
module_init(idt_init);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 435/885] applicom: Fix PCI device refcount leak in applicom_init()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (433 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 434/885] eeprom: idt_89hpesx: Fix error handling in idt_init() Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 436/885] firmware: stratix10-svc: add missing gen_pool_destroy() in stratix10_svc_drv_probe() Greg Kroah-Hartman
` (452 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Xiongfeng Wang, Sasha Levin
From: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ Upstream commit ce4273d89c52167d6fe20572136c58117eae0657 ]
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in applicom_init() with 'dev' not NULL, we need to
call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221122114035.24194-1-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/applicom.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index 36203d3fa6ea6..69314532f38cd 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -197,8 +197,10 @@ static int __init applicom_init(void)
if (!pci_match_id(applicom_pci_tbl, dev))
continue;
- if (pci_enable_device(dev))
+ if (pci_enable_device(dev)) {
+ pci_dev_put(dev);
return -EIO;
+ }
RamIO = ioremap(pci_resource_start(dev, 0), LEN_RAM_IO);
@@ -207,6 +209,7 @@ static int __init applicom_init(void)
"space at 0x%llx\n",
(unsigned long long)pci_resource_start(dev, 0));
pci_disable_device(dev);
+ pci_dev_put(dev);
return -EIO;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 436/885] firmware: stratix10-svc: add missing gen_pool_destroy() in stratix10_svc_drv_probe()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (434 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 435/885] applicom: Fix PCI device refcount leak in applicom_init() Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 437/885] firmware: stratix10-svc: fix error handle while alloc/add device failed Greg Kroah-Hartman
` (451 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Dinh Nguyen, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 9175ee1a99d57ec07d66ff572e1d5a724477ab37 ]
In error path in stratix10_svc_drv_probe(), gen_pool_destroy() should be called
to destroy the memory pool that created by svc_create_memory_pool().
Fixes: 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20221129163602.462369-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/stratix10-svc.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
index b4081f4d88a37..1a5640b3ab422 100644
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -1138,13 +1138,17 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
/* allocate service controller and supporting channel */
controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL);
- if (!controller)
- return -ENOMEM;
+ if (!controller) {
+ ret = -ENOMEM;
+ goto err_destroy_pool;
+ }
chans = devm_kmalloc_array(dev, SVC_NUM_CHANNEL,
sizeof(*chans), GFP_KERNEL | __GFP_ZERO);
- if (!chans)
- return -ENOMEM;
+ if (!chans) {
+ ret = -ENOMEM;
+ goto err_destroy_pool;
+ }
controller->dev = dev;
controller->num_chans = SVC_NUM_CHANNEL;
@@ -1159,7 +1163,7 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
ret = kfifo_alloc(&controller->svc_fifo, fifo_size, GFP_KERNEL);
if (ret) {
dev_err(dev, "failed to allocate FIFO\n");
- return ret;
+ goto err_destroy_pool;
}
spin_lock_init(&controller->svc_fifo_lock);
@@ -1221,6 +1225,8 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
err_free_kfifo:
kfifo_free(&controller->svc_fifo);
+err_destroy_pool:
+ gen_pool_destroy(genpool);
return ret;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 437/885] firmware: stratix10-svc: fix error handle while alloc/add device failed
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (435 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 436/885] firmware: stratix10-svc: add missing gen_pool_destroy() in stratix10_svc_drv_probe() Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 438/885] VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF Greg Kroah-Hartman
` (450 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Dinh Nguyen, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit d66a4c20ae55ac88136b4a3befd944c093ffa677 ]
If add device "stratix10-rsu" failed in stratix10_svc_drv_probe(),
the 'svc_fifo' and 'genpool' need be freed in the error path.
If allocate or add device "intel-fcs" failed in stratix10_svc_drv_probe(),
the device "stratix10-rsu" need be unregistered in the error path.
Fixes: e6281c26674e ("firmware: stratix10-svc: Add support for FCS")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20221129163602.462369-2-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/stratix10-svc.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
index 1a5640b3ab422..bde1f543f5298 100644
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -1202,19 +1202,20 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
ret = platform_device_add(svc->stratix10_svc_rsu);
if (ret) {
platform_device_put(svc->stratix10_svc_rsu);
- return ret;
+ goto err_free_kfifo;
}
svc->intel_svc_fcs = platform_device_alloc(INTEL_FCS, 1);
if (!svc->intel_svc_fcs) {
dev_err(dev, "failed to allocate %s device\n", INTEL_FCS);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_unregister_dev;
}
ret = platform_device_add(svc->intel_svc_fcs);
if (ret) {
platform_device_put(svc->intel_svc_fcs);
- return ret;
+ goto err_unregister_dev;
}
dev_set_drvdata(dev, svc);
@@ -1223,6 +1224,8 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
return 0;
+err_unregister_dev:
+ platform_device_unregister(svc->stratix10_svc_rsu);
err_free_kfifo:
kfifo_free(&controller->svc_fifo);
err_destroy_pool:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 438/885] VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (436 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 437/885] firmware: stratix10-svc: fix error handle while alloc/add device failed Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 439/885] mei: pxp: Use correct macros to initialize uuid_le Greg Kroah-Hartman
` (449 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzkaller, George Kennedy,
Vishnu Dasa, Sasha Levin
From: George Kennedy <george.kennedy@oracle.com>
[ Upstream commit 1a726cb47fd204109c767409fa9ca15a96328f14 ]
The call to get_user_pages_fast() in vmci_host_setup_notify() can return
NULL context->notify_page causing a GPF. To avoid GPF check if
context->notify_page == NULL and return error if so.
general protection fault, probably for non-canonical address
0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x0005088000000300-
0x0005088000000307]
CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1
Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014
RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0
Call Trace:
<TASK>
vmci_host_unlocked_ioctl+0x362/0x1f40
__x64_sys_ioctl+0x1a1/0x230
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: a1d88436d53a ("VMCI: Fix two UVA mapping bugs")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Link: https://lore.kernel.org/r/1669666705-24012-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/vmw_vmci/vmci_host.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/misc/vmw_vmci/vmci_host.c b/drivers/misc/vmw_vmci/vmci_host.c
index da1e2a773823e..857b9851402a6 100644
--- a/drivers/misc/vmw_vmci/vmci_host.c
+++ b/drivers/misc/vmw_vmci/vmci_host.c
@@ -242,6 +242,8 @@ static int vmci_host_setup_notify(struct vmci_ctx *context,
context->notify_page = NULL;
return VMCI_ERROR_GENERIC;
}
+ if (context->notify_page == NULL)
+ return VMCI_ERROR_UNAVAILABLE;
/*
* Map the locked page and set up notify pointer.
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 439/885] mei: pxp: Use correct macros to initialize uuid_le
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (437 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 438/885] VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 440/885] misc/mei/hdcp: " Greg Kroah-Hartman
` (448 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko, Tomas Winkler, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 503b676dde2780330c90a10b37a844686601a784 ]
GUID_INIT() is for internal guid_t type and shouldn't be used
for the uuid_le. I.o.w. relying on the implementation details
is layering violation. Use correct macros to initialize uuid_le.
Fixes: c2004ce99ed7 ("mei: pxp: export pavp client to me client bus")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221228160558.21311-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/mei/pxp/mei_pxp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/mei/pxp/mei_pxp.c b/drivers/misc/mei/pxp/mei_pxp.c
index 5c39457e3f53d..412b2d91d9459 100644
--- a/drivers/misc/mei/pxp/mei_pxp.c
+++ b/drivers/misc/mei/pxp/mei_pxp.c
@@ -206,8 +206,8 @@ static void mei_pxp_remove(struct mei_cl_device *cldev)
}
/* fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1 : PAVP GUID*/
-#define MEI_GUID_PXP GUID_INIT(0xfbf6fcf1, 0x96cf, 0x4e2e, 0xA6, \
- 0xa6, 0x1b, 0xab, 0x8c, 0xbe, 0x36, 0xb1)
+#define MEI_GUID_PXP UUID_LE(0xfbf6fcf1, 0x96cf, 0x4e2e, 0xA6, \
+ 0xa6, 0x1b, 0xab, 0x8c, 0xbe, 0x36, 0xb1)
static struct mei_cl_device_id mei_pxp_tbl[] = {
{ .uuid = MEI_GUID_PXP, .version = MEI_CL_VERSION_ANY },
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 440/885] misc/mei/hdcp: Use correct macros to initialize uuid_le
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (438 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 439/885] mei: pxp: Use correct macros to initialize uuid_le Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 441/885] misc: fastrpc: Fix an error handling path in fastrpc_rpmsg_probe() Greg Kroah-Hartman
` (447 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko, Tomas Winkler, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 512ba04d8211dd1a54dd36adc3ecc527a28069c5 ]
GUID_INIT() is for internal guid_t type and shouldn't be used
for the uuid_le. I.o.w. relying on the implementation details
is layering violation. Use correct macros to initialize uuid_le.
Fixes: 64e9bbdd9588 ("misc/mei/hdcp: Client driver for HDCP application")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221228160500.21220-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/mei/hdcp/mei_hdcp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c
index e889a8bd7ac88..e0dcd5c114db1 100644
--- a/drivers/misc/mei/hdcp/mei_hdcp.c
+++ b/drivers/misc/mei/hdcp/mei_hdcp.c
@@ -859,8 +859,8 @@ static void mei_hdcp_remove(struct mei_cl_device *cldev)
dev_warn(&cldev->dev, "mei_cldev_disable() failed\n");
}
-#define MEI_UUID_HDCP GUID_INIT(0xB638AB7E, 0x94E2, 0x4EA2, 0xA5, \
- 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04)
+#define MEI_UUID_HDCP UUID_LE(0xB638AB7E, 0x94E2, 0x4EA2, 0xA5, \
+ 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04)
static const struct mei_cl_device_id mei_hdcp_tbl[] = {
{ .uuid = MEI_UUID_HDCP, .version = MEI_CL_VERSION_ANY },
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 441/885] misc: fastrpc: Fix an error handling path in fastrpc_rpmsg_probe()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (439 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 440/885] misc/mei/hdcp: " Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 442/885] driver core: fix resource leak in device_add() Greg Kroah-Hartman
` (446 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Christophe JAILLET, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit 11819ed2b70da94acc41fec34178a011c4d3d25d ]
If of_platform_populate() fails, some resources need to be freed as already
done in the other error handling paths.
Fixes: 278d56f970ae ("misc: fastrpc: Reference count channel context")
Fixes: 3abe3ab3cdab ("misc: fastrpc: add secure domain support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/b909d2f3273b794ea0f1f78d14bc24affb08ea5f.1669398274.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/fastrpc.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c
index 80811e852d8fd..02d26160c64e6 100644
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -2127,7 +2127,18 @@ static int fastrpc_rpmsg_probe(struct rpmsg_device *rpdev)
data->domain_id = domain_id;
data->rpdev = rpdev;
- return of_platform_populate(rdev->of_node, NULL, NULL, rdev);
+ err = of_platform_populate(rdev->of_node, NULL, NULL, rdev);
+ if (err)
+ goto populate_error;
+
+ return 0;
+
+populate_error:
+ if (data->fdevice)
+ misc_deregister(&data->fdevice->miscdev);
+ if (data->secure_fdevice)
+ misc_deregister(&data->secure_fdevice->miscdev);
+
fdev_error:
kfree(data);
return err;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 442/885] driver core: fix resource leak in device_add()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (440 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 441/885] misc: fastrpc: Fix an error handling path in fastrpc_rpmsg_probe() Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 443/885] driver core: location: Free struct acpi_pld_info *pld before return false Greg Kroah-Hartman
` (445 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zhengchao Shao, Sasha Levin
From: Zhengchao Shao <shaozhengchao@huawei.com>
[ Upstream commit 6977b1a5d67097eaa4d02b0c126c04cc6e8917c0 ]
When calling kobject_add() failed in device_add(), it will call
cleanup_glue_dir() to free resource. But in kobject_add(),
dev->kobj.parent has been set to NULL. This will cause resource leak.
The process is as follows:
device_add()
get_device_parent()
class_dir_create_and_add()
kobject_add() //kobject_get()
...
dev->kobj.parent = kobj;
...
kobject_add() //failed, but set dev->kobj.parent = NULL
...
glue_dir = get_glue_dir(dev) //glue_dir = NULL, and goto
//"Error" label
...
cleanup_glue_dir() //becaues glue_dir is NULL, not call
//kobject_put()
The preceding problem may cause insmod mac80211_hwsim.ko to failed.
sysfs: cannot create duplicate filename '/devices/virtual/mac80211_hwsim'
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x224/0x280
kobject_add_internal+0x2aa/0x880
kobject_add+0x135/0x1a0
get_device_parent+0x3d7/0x590
device_add+0x2aa/0x1cb0
device_create_groups_vargs+0x1eb/0x260
device_create+0xdc/0x110
mac80211_hwsim_new_radio+0x31e/0x4790 [mac80211_hwsim]
init_mac80211_hwsim+0x48d/0x1000 [mac80211_hwsim]
do_one_initcall+0x10f/0x630
do_init_module+0x19f/0x5e0
load_module+0x64b7/0x6eb0
__do_sys_finit_module+0x140/0x200
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
kobject_add_internal failed for mac80211_hwsim with -EEXIST, don't try to
register things with the same name in the same directory.
Fixes: cebf8fd16900 ("driver core: fix race between creating/querying glue dir and its cleanup")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221123012042.335252-1-shaozhengchao@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index e5c15061070b7..9019b81405bf2 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -3451,7 +3451,7 @@ int device_add(struct device *dev)
/* we require the name to be set before, and pass NULL */
error = kobject_add(&dev->kobj, dev->kobj.parent, NULL);
if (error) {
- glue_dir = get_glue_dir(dev);
+ glue_dir = kobj;
goto Error;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 443/885] driver core: location: Free struct acpi_pld_info *pld before return false
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (441 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 442/885] driver core: fix resource leak in device_add() Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 444/885] drivers: base: transport_class: fix possible memory leak Greg Kroah-Hartman
` (444 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Hanjun Guo, Sasha Levin
From: Hanjun Guo <guohanjun@huawei.com>
[ Upstream commit 0d150f967e8410e1e6712484543eec709356a65d ]
struct acpi_pld_info *pld should be freed before the return of allocation
failure, to prevent memory leak, add the ACPI_FREE() to fix it.
Fixes: bc443c31def5 ("driver core: location: Check for allocations failure")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1669102648-11517-1-git-send-email-guohanjun@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/physical_location.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/base/physical_location.c b/drivers/base/physical_location.c
index 87af641cfe1a3..951819e71b4ad 100644
--- a/drivers/base/physical_location.c
+++ b/drivers/base/physical_location.c
@@ -24,8 +24,11 @@ bool dev_add_physical_location(struct device *dev)
dev->physical_location =
kzalloc(sizeof(*dev->physical_location), GFP_KERNEL);
- if (!dev->physical_location)
+ if (!dev->physical_location) {
+ ACPI_FREE(pld);
return false;
+ }
+
dev->physical_location->panel = pld->panel;
dev->physical_location->vertical_position = pld->vertical_position;
dev->physical_location->horizontal_position = pld->horizontal_position;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 444/885] drivers: base: transport_class: fix possible memory leak
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (442 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 443/885] driver core: location: Free struct acpi_pld_info *pld before return false Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 445/885] drivers: base: transport_class: fix resource leak when transport_add_device() fails Greg Kroah-Hartman
` (443 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit a86367803838b369fe5486ac18771d14723c258c ]
Current some drivers(like iscsi) call transport_register_device()
failed, they don't call transport_destroy_device() to release the
memory allocated in transport_setup_device(), because they don't
know what was done, it should be internal thing to release the
resource in register function. So fix this leak by calling destroy
function inside register function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221110102307.3492557-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/transport_class.h | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/include/linux/transport_class.h b/include/linux/transport_class.h
index 63076fb835e34..2efc271a96fa6 100644
--- a/include/linux/transport_class.h
+++ b/include/linux/transport_class.h
@@ -70,8 +70,14 @@ void transport_destroy_device(struct device *);
static inline int
transport_register_device(struct device *dev)
{
+ int ret;
+
transport_setup_device(dev);
- return transport_add_device(dev);
+ ret = transport_add_device(dev);
+ if (ret)
+ transport_destroy_device(dev);
+
+ return ret;
}
static inline void
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 445/885] drivers: base: transport_class: fix resource leak when transport_add_device() fails
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (443 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 444/885] drivers: base: transport_class: fix possible memory leak Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 446/885] firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle Greg Kroah-Hartman
` (442 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit e5da06b27ff5a148e42265c8e306670a9d913969 ]
The normal call sequence of using transport class is:
Add path:
transport_setup_device()
transport_setup_classdev() // call sas_host_setup() here
transport_add_device() // if fails, need call transport_destroy_device()
transport_configure_device()
Remove path:
transport_remove_device()
transport_remove_classdev // call sas_host_remove() here
transport_destroy_device()
If transport_add_device() fails, need call transport_destroy_device()
to free memory, but in this case, ->remove() is not called, and the
resources allocated in ->setup() are leaked. So fix these leaks by
calling ->remove() in transport_add_class_device() if it returns error.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221115031638.3816551-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/transport_class.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/base/transport_class.c b/drivers/base/transport_class.c
index ccc86206e5087..09ee2a1e35bbd 100644
--- a/drivers/base/transport_class.c
+++ b/drivers/base/transport_class.c
@@ -155,12 +155,27 @@ static int transport_add_class_device(struct attribute_container *cont,
struct device *dev,
struct device *classdev)
{
+ struct transport_class *tclass = class_to_transport_class(cont->class);
int error = attribute_container_add_class_device(classdev);
struct transport_container *tcont =
attribute_container_to_transport_container(cont);
- if (!error && tcont->statistics)
+ if (error)
+ goto err_remove;
+
+ if (tcont->statistics) {
error = sysfs_create_group(&classdev->kobj, tcont->statistics);
+ if (error)
+ goto err_del;
+ }
+
+ return 0;
+
+err_del:
+ attribute_container_class_device_del(classdev);
+err_remove:
+ if (tclass->remove)
+ tclass->remove(tcont, dev, classdev);
return error;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 446/885] firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (444 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 445/885] drivers: base: transport_class: fix resource leak when transport_add_device() fails Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 447/885] fotg210-udc: Add missing completion handler Greg Kroah-Hartman
` (441 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Chen Zhongjin, Sasha Levin
From: Chen Zhongjin <chenzhongjin@huawei.com>
[ Upstream commit 18e126e97c961f7a93823795c879d7c085fe5098 ]
KASAN reported a null-ptr-deref error:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 1373 Comm: modprobe
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:dmi_sysfs_entry_release
...
Call Trace:
<TASK>
kobject_put
dmi_sysfs_register_handle (drivers/firmware/dmi-sysfs.c:540) dmi_sysfs
dmi_decode_table (drivers/firmware/dmi_scan.c:133)
dmi_walk (drivers/firmware/dmi_scan.c:1115)
dmi_sysfs_init (drivers/firmware/dmi-sysfs.c:149) dmi_sysfs
do_one_initcall (init/main.c:1296)
...
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x4000000 from 0xffffffff81000000
---[ end Kernel panic - not syncing: Fatal exception ]---
It is because previous patch added kobject_put() to release the memory
which will call dmi_sysfs_entry_release() and list_del().
However, list_add_tail(entry->list) is called after the error block,
so the list_head is uninitialized and cannot be deleted.
Move error handling to after list_add_tail to fix this.
Fixes: 660ba678f999 ("firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221111015326.251650-2-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/dmi-sysfs.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c
index 66727ad3361b9..402217c570333 100644
--- a/drivers/firmware/dmi-sysfs.c
+++ b/drivers/firmware/dmi-sysfs.c
@@ -603,16 +603,16 @@ static void __init dmi_sysfs_register_handle(const struct dmi_header *dh,
*ret = kobject_init_and_add(&entry->kobj, &dmi_sysfs_entry_ktype, NULL,
"%d-%d", dh->type, entry->instance);
- if (*ret) {
- kobject_put(&entry->kobj);
- return;
- }
-
/* Thread on the global list for cleanup */
spin_lock(&entry_list_lock);
list_add_tail(&entry->list, &entry_list);
spin_unlock(&entry_list_lock);
+ if (*ret) {
+ kobject_put(&entry->kobj);
+ return;
+ }
+
/* Handle specializations by type */
switch (dh->type) {
case DMI_ENTRY_SYSTEM_EVENT_LOG:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 447/885] fotg210-udc: Add missing completion handler
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (445 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 446/885] firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 448/885] dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers Greg Kroah-Hartman
` (440 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Fabian Vogt, Linus Walleij, Sasha Levin
From: Fabian Vogt <fabian@ritter-vogt.de>
[ Upstream commit e55f67391fa986f7357edba0ca59e668d99c3a5f ]
This is used when responding to GET_STATUS requests. Without this, it
crashes on completion.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230123073508.2350402-2-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/fotg210-udc.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index 693c73e5f61e8..3350b7776086a 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -706,6 +706,20 @@ static int fotg210_is_epnstall(struct fotg210_ep *ep)
return value & INOUTEPMPSR_STL_EP ? 1 : 0;
}
+/* For EP0 requests triggered by this driver (currently GET_STATUS response) */
+static void fotg210_ep0_complete(struct usb_ep *_ep, struct usb_request *req)
+{
+ struct fotg210_ep *ep;
+ struct fotg210_udc *fotg210;
+
+ ep = container_of(_ep, struct fotg210_ep, ep);
+ fotg210 = ep->fotg210;
+
+ if (req->status || req->actual != req->length) {
+ dev_warn(&fotg210->gadget.dev, "EP0 request failed: %d\n", req->status);
+ }
+}
+
static void fotg210_get_status(struct fotg210_udc *fotg210,
struct usb_ctrlrequest *ctrl)
{
@@ -1171,6 +1185,8 @@ static int fotg210_udc_probe(struct platform_device *pdev)
if (fotg210->ep0_req == NULL)
goto err_map;
+ fotg210->ep0_req->complete = fotg210_ep0_complete;
+
fotg210_init(fotg210);
fotg210_disable_unplug(fotg210);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 448/885] dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (446 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 447/885] fotg210-udc: Add missing completion handler Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 449/885] fpga: microchip-spi: move SPI I/O buffers out of stack Greg Kroah-Hartman
` (439 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Manivannan Sadhasivam, Serge Semin,
Lorenzo Pieralisi, Bjorn Helgaas, Vinod Koul, Sasha Levin
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
[ Upstream commit 13b6299cf66165a442089fa895a7f70250703584 ]
Interleaved DMA transfer support was added by 85e7518f42c8 ("dmaengine:
dw-edma: Add device_prep_interleave_dma() support"), but depending on the
selected channel, either source or destination address are left
uninitialized which was obviously wrong.
Initialize the destination address of the eDMA burst descriptors for
DEV_TO_MEM interleaved operations and the source address for MEM_TO_DEV
operations.
Link: https://lore.kernel.org/r/20230113171409.30470-5-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42c8 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/dw-edma/dw-edma-core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
index c54b24ff5206a..52bdf04aff511 100644
--- a/drivers/dma/dw-edma/dw-edma-core.c
+++ b/drivers/dma/dw-edma/dw-edma-core.c
@@ -455,6 +455,8 @@ dw_edma_device_transfer(struct dw_edma_transfer *xfer)
* and destination addresses are increased
* by the same portion (data length)
*/
+ } else if (xfer->type == EDMA_XFER_INTERLEAVED) {
+ burst->dar = dst_addr;
}
} else {
burst->dar = dst_addr;
@@ -470,6 +472,8 @@ dw_edma_device_transfer(struct dw_edma_transfer *xfer)
* and destination addresses are increased
* by the same portion (data length)
*/
+ } else if (xfer->type == EDMA_XFER_INTERLEAVED) {
+ burst->sar = src_addr;
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 449/885] fpga: microchip-spi: move SPI I/O buffers out of stack
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (447 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 448/885] dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 450/885] fpga: microchip-spi: rewrite status polling in a time measurable way Greg Kroah-Hartman
` (438 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ivan Bornyakov, Conor Dooley,
Xu Yilun, Sasha Levin
From: Ivan Bornyakov <i.bornyakov@metrotek.ru>
[ Upstream commit 1da53d23a41c5f77963984d8da5623ed56918ada ]
As spi-summary doc says:
> I/O buffers use the usual Linux rules, and must be DMA-safe.
> You'd normally allocate them from the heap or free page pool.
> Don't use the stack, or anything that's declared "static".
Replace spi_write() with spi_write_then_read(), which is dma-safe for
on-stack buffers. Use cacheline aligned buffers for transfers used in
spi_sync_transfer().
Although everything works OK with stack-located I/O buffers, better
follow the doc to be safe.
Fixes: 5f8d4a900830 ("fpga: microchip-spi: add Microchip MPF FPGA manager")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221230092922.18822-2-i.bornyakov@metrotek.ru
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/fpga/microchip-spi.c | 93 ++++++++++++++++++------------------
1 file changed, 47 insertions(+), 46 deletions(-)
diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c
index 7436976ea9048..bb69f5beefe78 100644
--- a/drivers/fpga/microchip-spi.c
+++ b/drivers/fpga/microchip-spi.c
@@ -42,46 +42,55 @@
struct mpf_priv {
struct spi_device *spi;
bool program_mode;
+ u8 tx __aligned(ARCH_KMALLOC_MINALIGN);
+ u8 rx;
};
-static int mpf_read_status(struct spi_device *spi)
+static int mpf_read_status(struct mpf_priv *priv)
{
- u8 status = 0, status_command = MPF_SPI_READ_STATUS;
- struct spi_transfer xfers[2] = { 0 };
- int ret;
-
/*
* HW status is returned on MISO in the first byte after CS went
* active. However, first reading can be inadequate, so we submit
* two identical SPI transfers and use result of the later one.
*/
- xfers[0].tx_buf = &status_command;
- xfers[1].tx_buf = &status_command;
- xfers[0].rx_buf = &status;
- xfers[1].rx_buf = &status;
- xfers[0].len = 1;
- xfers[1].len = 1;
- xfers[0].cs_change = 1;
+ struct spi_transfer xfers[2] = {
+ {
+ .tx_buf = &priv->tx,
+ .rx_buf = &priv->rx,
+ .len = 1,
+ .cs_change = 1,
+ }, {
+ .tx_buf = &priv->tx,
+ .rx_buf = &priv->rx,
+ .len = 1,
+ },
+ };
+ u8 status;
+ int ret;
+
+ priv->tx = MPF_SPI_READ_STATUS;
+
+ ret = spi_sync_transfer(priv->spi, xfers, 2);
+ if (ret)
+ return ret;
- ret = spi_sync_transfer(spi, xfers, 2);
+ status = priv->rx;
if ((status & MPF_STATUS_SPI_VIOLATION) ||
(status & MPF_STATUS_SPI_ERROR))
- ret = -EIO;
+ return -EIO;
- return ret ? : status;
+ return status;
}
static enum fpga_mgr_states mpf_ops_state(struct fpga_manager *mgr)
{
struct mpf_priv *priv = mgr->priv;
- struct spi_device *spi;
bool program_mode;
int status;
- spi = priv->spi;
program_mode = priv->program_mode;
- status = mpf_read_status(spi);
+ status = mpf_read_status(priv);
if (!program_mode && !status)
return FPGA_MGR_STATE_OPERATING;
@@ -186,12 +195,12 @@ static int mpf_ops_parse_header(struct fpga_manager *mgr,
}
/* Poll HW status until busy bit is cleared and mask bits are set. */
-static int mpf_poll_status(struct spi_device *spi, u8 mask)
+static int mpf_poll_status(struct mpf_priv *priv, u8 mask)
{
int status, retries = MPF_STATUS_POLL_RETRIES;
while (retries--) {
- status = mpf_read_status(spi);
+ status = mpf_read_status(priv);
if (status < 0)
return status;
@@ -205,32 +214,32 @@ static int mpf_poll_status(struct spi_device *spi, u8 mask)
return -EBUSY;
}
-static int mpf_spi_write(struct spi_device *spi, const void *buf, size_t buf_size)
+static int mpf_spi_write(struct mpf_priv *priv, const void *buf, size_t buf_size)
{
- int status = mpf_poll_status(spi, 0);
+ int status = mpf_poll_status(priv, 0);
if (status < 0)
return status;
- return spi_write(spi, buf, buf_size);
+ return spi_write_then_read(priv->spi, buf, buf_size, NULL, 0);
}
-static int mpf_spi_write_then_read(struct spi_device *spi,
+static int mpf_spi_write_then_read(struct mpf_priv *priv,
const void *txbuf, size_t txbuf_size,
void *rxbuf, size_t rxbuf_size)
{
const u8 read_command[] = { MPF_SPI_READ_DATA };
int ret;
- ret = mpf_spi_write(spi, txbuf, txbuf_size);
+ ret = mpf_spi_write(priv, txbuf, txbuf_size);
if (ret)
return ret;
- ret = mpf_poll_status(spi, MPF_STATUS_READY);
+ ret = mpf_poll_status(priv, MPF_STATUS_READY);
if (ret < 0)
return ret;
- return spi_write_then_read(spi, read_command, sizeof(read_command),
+ return spi_write_then_read(priv->spi, read_command, sizeof(read_command),
rxbuf, rxbuf_size);
}
@@ -242,7 +251,6 @@ static int mpf_ops_write_init(struct fpga_manager *mgr,
const u8 isc_en_command[] = { MPF_SPI_ISC_ENABLE };
struct mpf_priv *priv = mgr->priv;
struct device *dev = &mgr->dev;
- struct spi_device *spi;
u32 isc_ret = 0;
int ret;
@@ -251,9 +259,7 @@ static int mpf_ops_write_init(struct fpga_manager *mgr,
return -EOPNOTSUPP;
}
- spi = priv->spi;
-
- ret = mpf_spi_write_then_read(spi, isc_en_command, sizeof(isc_en_command),
+ ret = mpf_spi_write_then_read(priv, isc_en_command, sizeof(isc_en_command),
&isc_ret, sizeof(isc_ret));
if (ret || isc_ret) {
dev_err(dev, "Failed to enable ISC: spi_ret %d, isc_ret %u\n",
@@ -261,7 +267,7 @@ static int mpf_ops_write_init(struct fpga_manager *mgr,
return -EFAULT;
}
- ret = mpf_spi_write(spi, program_mode, sizeof(program_mode));
+ ret = mpf_spi_write(priv, program_mode, sizeof(program_mode));
if (ret) {
dev_err(dev, "Failed to enter program mode: %d\n", ret);
return ret;
@@ -274,11 +280,9 @@ static int mpf_ops_write_init(struct fpga_manager *mgr,
static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count)
{
- u8 spi_frame_command[] = { MPF_SPI_FRAME };
struct spi_transfer xfers[2] = { 0 };
struct mpf_priv *priv = mgr->priv;
struct device *dev = &mgr->dev;
- struct spi_device *spi;
int ret, i;
if (count % MPF_SPI_FRAME_SIZE) {
@@ -287,18 +291,18 @@ static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count
return -EINVAL;
}
- spi = priv->spi;
-
- xfers[0].tx_buf = spi_frame_command;
- xfers[0].len = sizeof(spi_frame_command);
+ xfers[0].tx_buf = &priv->tx;
+ xfers[0].len = 1;
for (i = 0; i < count / MPF_SPI_FRAME_SIZE; i++) {
xfers[1].tx_buf = buf + i * MPF_SPI_FRAME_SIZE;
xfers[1].len = MPF_SPI_FRAME_SIZE;
- ret = mpf_poll_status(spi, 0);
- if (ret >= 0)
- ret = spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers));
+ ret = mpf_poll_status(priv, 0);
+ if (ret >= 0) {
+ priv->tx = MPF_SPI_FRAME;
+ ret = spi_sync_transfer(priv->spi, xfers, ARRAY_SIZE(xfers));
+ }
if (ret) {
dev_err(dev, "Failed to write bitstream frame %d/%zu\n",
@@ -317,12 +321,9 @@ static int mpf_ops_write_complete(struct fpga_manager *mgr,
const u8 release_command[] = { MPF_SPI_RELEASE };
struct mpf_priv *priv = mgr->priv;
struct device *dev = &mgr->dev;
- struct spi_device *spi;
int ret;
- spi = priv->spi;
-
- ret = mpf_spi_write(spi, isc_dis_command, sizeof(isc_dis_command));
+ ret = mpf_spi_write(priv, isc_dis_command, sizeof(isc_dis_command));
if (ret) {
dev_err(dev, "Failed to disable ISC: %d\n", ret);
return ret;
@@ -330,7 +331,7 @@ static int mpf_ops_write_complete(struct fpga_manager *mgr,
usleep_range(1000, 2000);
- ret = mpf_spi_write(spi, release_command, sizeof(release_command));
+ ret = mpf_spi_write(priv, release_command, sizeof(release_command));
if (ret) {
dev_err(dev, "Failed to exit program mode: %d\n", ret);
return ret;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 450/885] fpga: microchip-spi: rewrite status polling in a time measurable way
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (448 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 449/885] fpga: microchip-spi: move SPI I/O buffers out of stack Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 451/885] usb: early: xhci-dbc: Fix a potential out-of-bound memory access Greg Kroah-Hartman
` (437 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ivan Bornyakov, Ilpo Järvinen,
Conor Dooley, Xu Yilun, Sasha Levin
From: Ivan Bornyakov <i.bornyakov@metrotek.ru>
[ Upstream commit 88e705697e801299a13ecaf2ba54599964fe711c ]
Original busy loop with retries count in mpf_poll_status() is not too
reliable, as it takes different times on different systems. Replace it
with read_poll_timeout() macro.
While at it, fix polling stop condition to met function's original
intention declared in the comment. The issue with original polling stop
condition is that it stops if any of mask bits is set, while intention
was to stop if all mask bits is set. This was not noticible because only
MPF_STATUS_READY is passed as mask argument and it is BIT(1).
Fixes: 5f8d4a900830 ("fpga: microchip-spi: add Microchip MPF FPGA manager")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221230092922.18822-3-i.bornyakov@metrotek.ru
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/fpga/microchip-spi.c | 32 +++++++++++++++++---------------
1 file changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c
index bb69f5beefe78..137fafdf57a6f 100644
--- a/drivers/fpga/microchip-spi.c
+++ b/drivers/fpga/microchip-spi.c
@@ -6,6 +6,7 @@
#include <asm/unaligned.h>
#include <linux/delay.h>
#include <linux/fpga/fpga-mgr.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/spi/spi.h>
@@ -33,7 +34,7 @@
#define MPF_BITS_PER_COMPONENT_SIZE 22
-#define MPF_STATUS_POLL_RETRIES 10000
+#define MPF_STATUS_POLL_TIMEOUT (2 * USEC_PER_SEC)
#define MPF_STATUS_BUSY BIT(0)
#define MPF_STATUS_READY BIT(1)
#define MPF_STATUS_SPI_VIOLATION BIT(2)
@@ -194,24 +195,25 @@ static int mpf_ops_parse_header(struct fpga_manager *mgr,
return 0;
}
-/* Poll HW status until busy bit is cleared and mask bits are set. */
static int mpf_poll_status(struct mpf_priv *priv, u8 mask)
{
- int status, retries = MPF_STATUS_POLL_RETRIES;
+ int ret, status;
- while (retries--) {
- status = mpf_read_status(priv);
- if (status < 0)
- return status;
-
- if (status & MPF_STATUS_BUSY)
- continue;
-
- if (!mask || (status & mask))
- return status;
- }
+ /*
+ * Busy poll HW status. Polling stops if any of the following
+ * conditions are met:
+ * - timeout is reached
+ * - mpf_read_status() returns an error
+ * - busy bit is cleared AND mask bits are set
+ */
+ ret = read_poll_timeout(mpf_read_status, status,
+ (status < 0) ||
+ ((status & (MPF_STATUS_BUSY | mask)) == mask),
+ 0, MPF_STATUS_POLL_TIMEOUT, false, priv);
+ if (ret < 0)
+ return ret;
- return -EBUSY;
+ return status;
}
static int mpf_spi_write(struct mpf_priv *priv, const void *buf, size_t buf_size)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 451/885] usb: early: xhci-dbc: Fix a potential out-of-bound memory access
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (449 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 450/885] fpga: microchip-spi: rewrite status polling in a time measurable way Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 452/885] tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case Greg Kroah-Hartman
` (436 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Christophe JAILLET, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit a4a97ab3db5c081eb6e7dba91306adefb461e0bd ]
If xdbc_bulk_write() fails, the values in 'buf' can be anything. So the
string is not guaranteed to be NULL terminated when xdbc_trace() is called.
Reserve an extra byte, which will be zeroed automatically because 'buf' is
a static variable, in order to avoid troubles, should it happen.
Fixes: aeb9dd1de98c ("usb/early: Add driver for xhci debug capability")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d6a7562c5e839a195cee85db6dc81817f9372cb1.1675016180.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/early/xhci-dbc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
index bfb7e2b852996..7ef0a4b397620 100644
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -874,7 +874,8 @@ static int xdbc_bulk_write(const char *bytes, int size)
static void early_xdbc_write(struct console *con, const char *str, u32 n)
{
- static char buf[XDBC_MAX_PACKET];
+ /* static variables are zeroed, so buf is always NULL terminated */
+ static char buf[XDBC_MAX_PACKET + 1];
int chunk, ret;
int use_cr = 0;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 452/885] tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (450 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 451/885] usb: early: xhci-dbc: Fix a potential out-of-bound memory access Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 453/885] RDMA/cxgb4: add null-ptr-check after ip_dev_find() Greg Kroah-Hartman
` (435 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Sherry Sun, Sasha Levin
From: Sherry Sun <sherry.sun@nxp.com>
[ Upstream commit 9ad9df8447547febe9dd09b040f4528a09e495f0 ]
The RXWATER value must be greater than 0 according to the LPUART
reference manual. And when the number of datawords in the receive
FIFO is greater than RXWATER, an interrupt or a DMA request is
generated, so no need to set the different value for lpuart interrupt
case and dma case. Here delete the wrong RXWATER setting for dma case
directly.
Fixes: 42b68768e51b ("serial: fsl_lpuart: DMA support for 32-bit variant")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230130064449.9564-4-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/fsl_lpuart.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 110c8720af47a..f6ac46879dc7b 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1684,12 +1684,6 @@ static void lpuart32_configure(struct lpuart_port *sport)
{
unsigned long temp;
- if (sport->lpuart_dma_rx_use) {
- /* RXWATER must be 0 */
- temp = lpuart32_read(&sport->port, UARTWATER);
- temp &= ~(UARTWATER_WATER_MASK << UARTWATER_RXWATER_OFF);
- lpuart32_write(&sport->port, temp, UARTWATER);
- }
temp = lpuart32_read(&sport->port, UARTCTRL);
if (!sport->lpuart_dma_rx_use)
temp |= UARTCTRL_RIE;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 453/885] RDMA/cxgb4: add null-ptr-check after ip_dev_find()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (451 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 452/885] tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 454/885] usb: musb: mediatek: dont unregister something that wasnt registered Greg Kroah-Hartman
` (434 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nikita Zhandarovich,
Leon Romanovsky, Sasha Levin
From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
[ Upstream commit ef42520240aacfc0d46c8d780c051d135a8dc9b7 ]
ip_dev_find() may return NULL and assign it to pdev which is
dereferenced later.
Fix this by checking the return value of ip_dev_find() for NULL
similar to the way it is done with other instances of said function.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1cab775c3e75 ("RDMA/cxgb4: Fix LE hash collision bug for passive open connection")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230201172103.17261-1-n.zhandarovich@fintech.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/cxgb4/cm.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 499a425a33791..ea3ddf0d24114 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -4144,6 +4144,10 @@ static int rx_pkt(struct c4iw_dev *dev, struct sk_buff *skb)
if (neigh->dev->flags & IFF_LOOPBACK) {
pdev = ip_dev_find(&init_net, iph->daddr);
+ if (!pdev) {
+ pr_err("%s - failed to find device!\n", __func__);
+ goto free_dst;
+ }
e = cxgb4_l2t_get(dev->rdev.lldi.l2t, neigh,
pdev, 0);
pi = (struct port_info *)netdev_priv(pdev);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 454/885] usb: musb: mediatek: dont unregister something that wasnt registered
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (452 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 453/885] RDMA/cxgb4: add null-ptr-check after ip_dev_find() Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 455/885] usb: gadget: configfs: Restrict symlink creation is UDC already binded Greg Kroah-Hartman
` (433 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Dan Carpenter, Sasha Levin
From: Dan Carpenter <error27@gmail.com>
[ Upstream commit ba883de971d1ad018f3083d9195b8abe54d87407 ]
This function only calls mtk_otg_switch_init() when the ->port_mode
is MUSB_OTG so the clean up code should only call mtk_otg_switch_exit()
for that mode.
Fixes: 0990366bab3c ("usb: musb: Add support for MediaTek musb controller")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y8/3TqpqiSr0RxFH@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/musb/mediatek.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/musb/mediatek.c b/drivers/usb/musb/mediatek.c
index cad991380b0cf..27b9bd2583400 100644
--- a/drivers/usb/musb/mediatek.c
+++ b/drivers/usb/musb/mediatek.c
@@ -294,7 +294,8 @@ static int mtk_musb_init(struct musb *musb)
err_phy_power_on:
phy_exit(glue->phy);
err_phy_init:
- mtk_otg_switch_exit(glue);
+ if (musb->port_mode == MUSB_OTG)
+ mtk_otg_switch_exit(glue);
return ret;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 455/885] usb: gadget: configfs: Restrict symlink creation is UDC already binded
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (453 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 454/885] usb: musb: mediatek: dont unregister something that wasnt registered Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 456/885] phy: mediatek: remove temporary variable @mask_ Greg Kroah-Hartman
` (432 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krishna Kurapati PSSNV,
Udipto Goswami, Sasha Levin
From: Udipto Goswami <quic_ugoswami@quicinc.com>
[ Upstream commit 89e7252d6c7e7eeb31971cd7df987316ecc64ff5 ]
During enumeration or composition switch,a userspace process
agnostic of the conventions of configs can try to create function
symlinks even after the UDC is bound to current config which is
not correct. Potentially it can create duplicates within the
current config.
Prevent this by adding a check if udc_name already exists, then bail
out of cfg_link.
Following is an example:
Step1:
ln -s X1 ffs.a
-->cfg_link
--> usb_get_function(ffs.a)
->ffs_alloc
CFG->FUNC_LIST: <ffs.a>
C->FUNCTION: <empty>
Step2:
echo udc.name > /config/usb_gadget/g1/UDC
--> UDC_store
->composite_bind
->usb_add_function
CFG->FUNC_LIST: <empty>
C->FUNCTION: <ffs.a>
Step3:
ln -s Y1 ffs.a
-->cfg_link
-->usb_get_function(ffs.a)
->ffs_alloc
CFG->FUNC_LIST: <ffs.a>
C->FUNCTION: <ffs.a>
both the lists corresponds to the same function instance ffs.a
but the usb_function* pointer is different because in step 3
ffs_alloc has created a new reference to usb_function* for
ffs.a and added it to cfg_list.
Step4:
Now a composition switch involving <ffs.b,ffs.a> is executed.
the composition switch will involve 3 things:
1. unlinking the previous functions existing
2. creating new symlinks
3. writing UDC
However, the composition switch is generally taken care by
userspace process which creates the symlinks in its own
nomenclature(X*) and removes only those.
So it won't be able to remove Y1 which user had created
by own.
Due to this the new symlinks cannot be created for ffs.a
since the entry already exists in CFG->FUNC_LIST.
The state of the CFG->FUNC_LIST is as follows:
CFG->FUNC_LIST: <ffs.a>
Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface")
Signed-off-by: Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/20230201132308.31523-1-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/configfs.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 7bbc776185469..4dcf29577f8f1 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -429,6 +429,12 @@ static int config_usb_cfg_link(
* from another gadget or a random directory.
* Also a function instance can only be linked once.
*/
+
+ if (gi->composite.gadget_driver.udc_name) {
+ ret = -EINVAL;
+ goto out;
+ }
+
list_for_each_entry(iter, &gi->available_func, cfs_list) {
if (iter != fi)
continue;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 456/885] phy: mediatek: remove temporary variable @mask_
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (454 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 455/885] usb: gadget: configfs: Restrict symlink creation is UDC already binded Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 457/885] PCI: mt7621: Delay phy ports initialization Greg Kroah-Hartman
` (431 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernel test robot, Chunfeng Yun,
AngeloGioacchino Del Regno, Vinod Koul, Sasha Levin
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
[ Upstream commit 49094d928618309877c50e589f23e639a3b0c453 ]
Remove the temporary @mask_, this may cause build warning when use clang
compiler for powerpc, but can't reproduce it when compile for arm64.
the build warning is caused by:
"warning: result of comparison of constant 18446744073709551615 with
expression of type (aka 'unsigned long') is always false
[-Wtautological-constant-out-of-range-compare]"
More information provided in below lore link.
After removing @mask_, there is a "CHECK:MACRO_ARG_REUSE" when run
checkpatch.pl, but due to @mask is constant, no reuse problem will happen.
Link: https://lore.kernel.org/lkml/202212160357.jJuesD8n-lkp@intel.com/t/
Fixes: 84513eccd678 ("phy: mediatek: fix build warning of FIELD_PREP()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118084343.26913-1-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/mediatek/phy-mtk-io.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/mediatek/phy-mtk-io.h b/drivers/phy/mediatek/phy-mtk-io.h
index d20ad5e5be814..58f06db822cb0 100644
--- a/drivers/phy/mediatek/phy-mtk-io.h
+++ b/drivers/phy/mediatek/phy-mtk-io.h
@@ -39,8 +39,8 @@ static inline void mtk_phy_update_bits(void __iomem *reg, u32 mask, u32 val)
/* field @mask shall be constant and continuous */
#define mtk_phy_update_field(reg, mask, val) \
({ \
- typeof(mask) mask_ = (mask); \
- mtk_phy_update_bits(reg, mask_, FIELD_PREP(mask_, val)); \
+ BUILD_BUG_ON_MSG(!__builtin_constant_p(mask), "mask is not constant"); \
+ mtk_phy_update_bits(reg, mask, FIELD_PREP(mask, val)); \
})
#endif
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 457/885] PCI: mt7621: Delay phy ports initialization
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (455 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 456/885] phy: mediatek: remove temporary variable @mask_ Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 458/885] iommu: dart: Add suspend/resume support Greg Kroah-Hartman
` (430 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sergio Paracuellos,
Lorenzo Pieralisi, Sasha Levin
From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
[ Upstream commit 0cb2a8f3456ff1cc51d571e287a48e8fddc98ec2 ]
Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need
to delay phy port initialization after calling the mt7621_pcie_init_port()
driver function to get into reliable boots for both warm and hard resets.
The delay required to detect the ports seems to be in the range [75-100]
milliseconds.
If the ports are not detected the controller is not functional.
There is no datasheet or something similar to really understand why this
extra delay is needed only for these devices and it is not for most of
the boards that are built on mt7621 SoC.
This issue has been reported by openWRT community and the complete
discussion is in [0]. The 100 milliseconds delay has been tested in all
devices to validate it.
Add the extra 100 milliseconds delay to fix the issue.
[0]: https://github.com/openwrt/openwrt/pull/11220
Link: https://lore.kernel.org/r/20221231074041.264738-1-sergio.paracuellos@gmail.com
Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/controller/pcie-mt7621.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/controller/pcie-mt7621.c b/drivers/pci/controller/pcie-mt7621.c
index ee7aad09d6277..63a5f4463a9f6 100644
--- a/drivers/pci/controller/pcie-mt7621.c
+++ b/drivers/pci/controller/pcie-mt7621.c
@@ -60,6 +60,7 @@
#define PCIE_PORT_LINKUP BIT(0)
#define PCIE_PORT_CNT 3
+#define INIT_PORTS_DELAY_MS 100
#define PERST_DELAY_MS 100
/**
@@ -369,6 +370,7 @@ static int mt7621_pcie_init_ports(struct mt7621_pcie *pcie)
}
}
+ msleep(INIT_PORTS_DELAY_MS);
mt7621_pcie_reset_ep_deassert(pcie);
tmp = NULL;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 458/885] iommu: dart: Add suspend/resume support
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (456 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 457/885] PCI: mt7621: Delay phy ports initialization Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 459/885] iommu: dart: Support >64 stream IDs Greg Kroah-Hartman
` (429 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sven Peter, Hector Martin,
Joerg Roedel, Sasha Levin
From: Hector Martin <marcan@marcan.st>
[ Upstream commit 3d68bbb81b1a64e279180eee1ed0e2c590b5029e ]
We need to save/restore the TCR/TTBR registers, since they are lost
on power gate.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230113105029.26654-3-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: cf5c1c87c239 ("iommu/dart: Fix apple_dart_device_group for PCI groups")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/apple-dart.c | 43 ++++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c
index 4f4a323be0d0f..2458416122f8d 100644
--- a/drivers/iommu/apple-dart.c
+++ b/drivers/iommu/apple-dart.c
@@ -121,6 +121,9 @@ struct apple_dart {
struct iommu_group *sid2group[DART_MAX_STREAMS];
struct iommu_device iommu;
+
+ u32 save_tcr[DART_MAX_STREAMS];
+ u32 save_ttbr[DART_MAX_STREAMS][DART_MAX_TTBR];
};
/*
@@ -932,6 +935,45 @@ static const struct apple_dart_hw apple_dart_hw_t6000 = {
.fmt = APPLE_DART2,
};
+static __maybe_unused int apple_dart_suspend(struct device *dev)
+{
+ struct apple_dart *dart = dev_get_drvdata(dev);
+ unsigned int sid, idx;
+
+ for (sid = 0; sid < DART_MAX_STREAMS; sid++) {
+ dart->save_tcr[sid] = readl_relaxed(dart->regs + DART_TCR(sid));
+ for (idx = 0; idx < DART_MAX_TTBR; idx++)
+ dart->save_ttbr[sid][idx] =
+ readl(dart->regs + DART_TTBR(sid, idx));
+ }
+
+ return 0;
+}
+
+static __maybe_unused int apple_dart_resume(struct device *dev)
+{
+ struct apple_dart *dart = dev_get_drvdata(dev);
+ unsigned int sid, idx;
+ int ret;
+
+ ret = apple_dart_hw_reset(dart);
+ if (ret) {
+ dev_err(dev, "Failed to reset DART on resume\n");
+ return ret;
+ }
+
+ for (sid = 0; sid < DART_MAX_STREAMS; sid++) {
+ for (idx = 0; idx < DART_MAX_TTBR; idx++)
+ writel(dart->save_ttbr[sid][idx],
+ dart->regs + DART_TTBR(sid, idx));
+ writel(dart->save_tcr[sid], dart->regs + DART_TCR(sid));
+ }
+
+ return 0;
+}
+
+DEFINE_SIMPLE_DEV_PM_OPS(apple_dart_pm_ops, apple_dart_suspend, apple_dart_resume);
+
static const struct of_device_id apple_dart_of_match[] = {
{ .compatible = "apple,t8103-dart", .data = &apple_dart_hw_t8103 },
{ .compatible = "apple,t6000-dart", .data = &apple_dart_hw_t6000 },
@@ -944,6 +986,7 @@ static struct platform_driver apple_dart_driver = {
.name = "apple-dart",
.of_match_table = apple_dart_of_match,
.suppress_bind_attrs = true,
+ .pm = pm_sleep_ptr(&apple_dart_pm_ops),
},
.probe = apple_dart_probe,
.remove = apple_dart_remove,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 459/885] iommu: dart: Support >64 stream IDs
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (457 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 458/885] iommu: dart: Add suspend/resume support Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 460/885] iommu/dart: Fix apple_dart_device_group for PCI groups Greg Kroah-Hartman
` (428 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sven Peter, Hector Martin,
Joerg Roedel, Sasha Levin
From: Hector Martin <marcan@marcan.st>
[ Upstream commit 510d4072df7fcf27dcd2dc1942d58b2cc02b03f2 ]
T8110 DARTs have up to 256 SIDs, so we need to switch to a bitmap to
handle them properly.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230113105029.26654-4-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: cf5c1c87c239 ("iommu/dart: Fix apple_dart_device_group for PCI groups")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/apple-dart.c | 114 +++++++++++++++++++++++--------------
1 file changed, 71 insertions(+), 43 deletions(-)
diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c
index 2458416122f8d..80e4436ee4de7 100644
--- a/drivers/iommu/apple-dart.c
+++ b/drivers/iommu/apple-dart.c
@@ -34,11 +34,10 @@
#include "dma-iommu.h"
-#define DART_MAX_STREAMS 16
+#define DART_MAX_STREAMS 256
#define DART_MAX_TTBR 4
#define MAX_DARTS_PER_DEVICE 2
-#define DART_STREAM_ALL 0xffff
#define DART_PARAMS1 0x00
#define DART_PARAMS_PAGE_SHIFT GENMASK(27, 24)
@@ -85,6 +84,8 @@
struct apple_dart_hw {
u32 oas;
enum io_pgtable_fmt fmt;
+
+ int max_sid_count;
};
/*
@@ -116,6 +117,7 @@ struct apple_dart {
spinlock_t lock;
u32 pgsize;
+ u32 num_streams;
u32 supports_bypass : 1;
u32 force_bypass : 1;
@@ -143,11 +145,11 @@ struct apple_dart {
*/
struct apple_dart_stream_map {
struct apple_dart *dart;
- unsigned long sidmap;
+ DECLARE_BITMAP(sidmap, DART_MAX_STREAMS);
};
struct apple_dart_atomic_stream_map {
struct apple_dart *dart;
- atomic64_t sidmap;
+ atomic_long_t sidmap[BITS_TO_LONGS(DART_MAX_STREAMS)];
};
/*
@@ -205,50 +207,55 @@ static struct apple_dart_domain *to_dart_domain(struct iommu_domain *dom)
static void
apple_dart_hw_enable_translation(struct apple_dart_stream_map *stream_map)
{
+ struct apple_dart *dart = stream_map->dart;
int sid;
- for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS)
+ for_each_set_bit(sid, stream_map->sidmap, dart->num_streams)
writel(DART_TCR_TRANSLATE_ENABLE,
- stream_map->dart->regs + DART_TCR(sid));
+ dart->regs + DART_TCR(sid));
}
static void apple_dart_hw_disable_dma(struct apple_dart_stream_map *stream_map)
{
+ struct apple_dart *dart = stream_map->dart;
int sid;
- for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS)
- writel(0, stream_map->dart->regs + DART_TCR(sid));
+ for_each_set_bit(sid, stream_map->sidmap, dart->num_streams)
+ writel(0, dart->regs + DART_TCR(sid));
}
static void
apple_dart_hw_enable_bypass(struct apple_dart_stream_map *stream_map)
{
+ struct apple_dart *dart = stream_map->dart;
int sid;
WARN_ON(!stream_map->dart->supports_bypass);
- for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS)
+ for_each_set_bit(sid, stream_map->sidmap, dart->num_streams)
writel(DART_TCR_BYPASS0_ENABLE | DART_TCR_BYPASS1_ENABLE,
- stream_map->dart->regs + DART_TCR(sid));
+ dart->regs + DART_TCR(sid));
}
static void apple_dart_hw_set_ttbr(struct apple_dart_stream_map *stream_map,
u8 idx, phys_addr_t paddr)
{
+ struct apple_dart *dart = stream_map->dart;
int sid;
WARN_ON(paddr & ((1 << DART_TTBR_SHIFT) - 1));
- for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS)
+ for_each_set_bit(sid, stream_map->sidmap, dart->num_streams)
writel(DART_TTBR_VALID | (paddr >> DART_TTBR_SHIFT),
- stream_map->dart->regs + DART_TTBR(sid, idx));
+ dart->regs + DART_TTBR(sid, idx));
}
static void apple_dart_hw_clear_ttbr(struct apple_dart_stream_map *stream_map,
u8 idx)
{
+ struct apple_dart *dart = stream_map->dart;
int sid;
- for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS)
- writel(0, stream_map->dart->regs + DART_TTBR(sid, idx));
+ for_each_set_bit(sid, stream_map->sidmap, dart->num_streams)
+ writel(0, dart->regs + DART_TTBR(sid, idx));
}
static void
@@ -270,7 +277,7 @@ apple_dart_hw_stream_command(struct apple_dart_stream_map *stream_map,
spin_lock_irqsave(&stream_map->dart->lock, flags);
- writel(stream_map->sidmap, stream_map->dart->regs + DART_STREAM_SELECT);
+ writel(stream_map->sidmap[0], stream_map->dart->regs + DART_STREAM_SELECT);
writel(command, stream_map->dart->regs + DART_STREAM_COMMAND);
ret = readl_poll_timeout_atomic(
@@ -283,7 +290,7 @@ apple_dart_hw_stream_command(struct apple_dart_stream_map *stream_map,
if (ret) {
dev_err(stream_map->dart->dev,
"busy bit did not clear after command %x for streams %lx\n",
- command, stream_map->sidmap);
+ command, stream_map->sidmap[0]);
return ret;
}
@@ -301,6 +308,7 @@ static int apple_dart_hw_reset(struct apple_dart *dart)
{
u32 config;
struct apple_dart_stream_map stream_map;
+ int i;
config = readl(dart->regs + DART_CONFIG);
if (config & DART_CONFIG_LOCK) {
@@ -310,12 +318,14 @@ static int apple_dart_hw_reset(struct apple_dart *dart)
}
stream_map.dart = dart;
- stream_map.sidmap = DART_STREAM_ALL;
+ bitmap_zero(stream_map.sidmap, DART_MAX_STREAMS);
+ bitmap_set(stream_map.sidmap, 0, dart->num_streams);
apple_dart_hw_disable_dma(&stream_map);
apple_dart_hw_clear_all_ttbrs(&stream_map);
/* enable all streams globally since TCR is used to control isolation */
- writel(DART_STREAM_ALL, dart->regs + DART_STREAMS_ENABLE);
+ for (i = 0; i < BITS_TO_U32(dart->num_streams); i++)
+ writel(U32_MAX, dart->regs + DART_STREAMS_ENABLE + 4 * i);
/* clear any pending errors before the interrupt is unmasked */
writel(readl(dart->regs + DART_ERROR), dart->regs + DART_ERROR);
@@ -325,13 +335,16 @@ static int apple_dart_hw_reset(struct apple_dart *dart)
static void apple_dart_domain_flush_tlb(struct apple_dart_domain *domain)
{
- int i;
+ int i, j;
struct apple_dart_atomic_stream_map *domain_stream_map;
struct apple_dart_stream_map stream_map;
for_each_stream_map(i, domain, domain_stream_map) {
stream_map.dart = domain_stream_map->dart;
- stream_map.sidmap = atomic64_read(&domain_stream_map->sidmap);
+
+ for (j = 0; j < BITS_TO_LONGS(stream_map.dart->num_streams); j++)
+ stream_map.sidmap[j] = atomic_long_read(&domain_stream_map->sidmap[j]);
+
apple_dart_hw_invalidate_tlb(&stream_map);
}
}
@@ -416,7 +429,7 @@ static int apple_dart_finalize_domain(struct iommu_domain *domain,
struct apple_dart *dart = cfg->stream_maps[0].dart;
struct io_pgtable_cfg pgtbl_cfg;
int ret = 0;
- int i;
+ int i, j;
mutex_lock(&dart_domain->init_lock);
@@ -425,8 +438,9 @@ static int apple_dart_finalize_domain(struct iommu_domain *domain,
for (i = 0; i < MAX_DARTS_PER_DEVICE; ++i) {
dart_domain->stream_maps[i].dart = cfg->stream_maps[i].dart;
- atomic64_set(&dart_domain->stream_maps[i].sidmap,
- cfg->stream_maps[i].sidmap);
+ for (j = 0; j < BITS_TO_LONGS(dart->num_streams); j++)
+ atomic_long_set(&dart_domain->stream_maps[i].sidmap[j],
+ cfg->stream_maps[i].sidmap[j]);
}
pgtbl_cfg = (struct io_pgtable_cfg){
@@ -461,7 +475,7 @@ apple_dart_mod_streams(struct apple_dart_atomic_stream_map *domain_maps,
struct apple_dart_stream_map *master_maps,
bool add_streams)
{
- int i;
+ int i, j;
for (i = 0; i < MAX_DARTS_PER_DEVICE; ++i) {
if (domain_maps[i].dart != master_maps[i].dart)
@@ -471,12 +485,14 @@ apple_dart_mod_streams(struct apple_dart_atomic_stream_map *domain_maps,
for (i = 0; i < MAX_DARTS_PER_DEVICE; ++i) {
if (!domain_maps[i].dart)
break;
- if (add_streams)
- atomic64_or(master_maps[i].sidmap,
- &domain_maps[i].sidmap);
- else
- atomic64_and(~master_maps[i].sidmap,
- &domain_maps[i].sidmap);
+ for (j = 0; j < BITS_TO_LONGS(domain_maps[i].dart->num_streams); j++) {
+ if (add_streams)
+ atomic_long_or(master_maps[i].sidmap[j],
+ &domain_maps[i].sidmap[j]);
+ else
+ atomic_long_and(~master_maps[i].sidmap[j],
+ &domain_maps[i].sidmap[j]);
+ }
}
return 0;
@@ -640,14 +656,14 @@ static int apple_dart_of_xlate(struct device *dev, struct of_phandle_args *args)
for (i = 0; i < MAX_DARTS_PER_DEVICE; ++i) {
if (cfg->stream_maps[i].dart == dart) {
- cfg->stream_maps[i].sidmap |= 1 << sid;
+ set_bit(sid, cfg->stream_maps[i].sidmap);
return 0;
}
}
for (i = 0; i < MAX_DARTS_PER_DEVICE; ++i) {
if (!cfg->stream_maps[i].dart) {
cfg->stream_maps[i].dart = dart;
- cfg->stream_maps[i].sidmap = 1 << sid;
+ set_bit(sid, cfg->stream_maps[i].sidmap);
return 0;
}
}
@@ -666,7 +682,7 @@ static void apple_dart_release_group(void *iommu_data)
mutex_lock(&apple_dart_groups_lock);
for_each_stream_map(i, group_master_cfg, stream_map)
- for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS)
+ for_each_set_bit(sid, stream_map->sidmap, stream_map->dart->num_streams)
stream_map->dart->sid2group[sid] = NULL;
kfree(iommu_data);
@@ -685,7 +701,7 @@ static struct iommu_group *apple_dart_device_group(struct device *dev)
mutex_lock(&apple_dart_groups_lock);
for_each_stream_map(i, cfg, stream_map) {
- for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS) {
+ for_each_set_bit(sid, stream_map->sidmap, stream_map->dart->num_streams) {
struct iommu_group *stream_group =
stream_map->dart->sid2group[sid];
@@ -724,7 +740,7 @@ static struct iommu_group *apple_dart_device_group(struct device *dev)
apple_dart_release_group);
for_each_stream_map(i, cfg, stream_map)
- for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS)
+ for_each_set_bit(sid, stream_map->sidmap, stream_map->dart->num_streams)
stream_map->dart->sid2group[sid] = group;
res = group;
@@ -869,16 +885,26 @@ static int apple_dart_probe(struct platform_device *pdev)
if (ret)
return ret;
- ret = apple_dart_hw_reset(dart);
- if (ret)
- goto err_clk_disable;
-
dart_params[0] = readl(dart->regs + DART_PARAMS1);
dart_params[1] = readl(dart->regs + DART_PARAMS2);
dart->pgsize = 1 << FIELD_GET(DART_PARAMS_PAGE_SHIFT, dart_params[0]);
dart->supports_bypass = dart_params[1] & DART_PARAMS_BYPASS_SUPPORT;
+
+ dart->num_streams = dart->hw->max_sid_count;
+
+ if (dart->num_streams > DART_MAX_STREAMS) {
+ dev_err(&pdev->dev, "Too many streams (%d > %d)\n",
+ dart->num_streams, DART_MAX_STREAMS);
+ ret = -EINVAL;
+ goto err_clk_disable;
+ }
+
dart->force_bypass = dart->pgsize > PAGE_SIZE;
+ ret = apple_dart_hw_reset(dart);
+ if (ret)
+ goto err_clk_disable;
+
ret = request_irq(dart->irq, apple_dart_irq, IRQF_SHARED,
"apple-dart fault handler", dart);
if (ret)
@@ -897,8 +923,8 @@ static int apple_dart_probe(struct platform_device *pdev)
dev_info(
&pdev->dev,
- "DART [pagesize %x, bypass support: %d, bypass forced: %d] initialized\n",
- dart->pgsize, dart->supports_bypass, dart->force_bypass);
+ "DART [pagesize %x, %d streams, bypass support: %d, bypass forced: %d] initialized\n",
+ dart->pgsize, dart->num_streams, dart->supports_bypass, dart->force_bypass);
return 0;
err_sysfs_remove:
@@ -929,10 +955,12 @@ static int apple_dart_remove(struct platform_device *pdev)
static const struct apple_dart_hw apple_dart_hw_t8103 = {
.oas = 36,
.fmt = APPLE_DART,
+ .max_sid_count = 16,
};
static const struct apple_dart_hw apple_dart_hw_t6000 = {
.oas = 42,
.fmt = APPLE_DART2,
+ .max_sid_count = 16,
};
static __maybe_unused int apple_dart_suspend(struct device *dev)
@@ -940,7 +968,7 @@ static __maybe_unused int apple_dart_suspend(struct device *dev)
struct apple_dart *dart = dev_get_drvdata(dev);
unsigned int sid, idx;
- for (sid = 0; sid < DART_MAX_STREAMS; sid++) {
+ for (sid = 0; sid < dart->num_streams; sid++) {
dart->save_tcr[sid] = readl_relaxed(dart->regs + DART_TCR(sid));
for (idx = 0; idx < DART_MAX_TTBR; idx++)
dart->save_ttbr[sid][idx] =
@@ -962,7 +990,7 @@ static __maybe_unused int apple_dart_resume(struct device *dev)
return ret;
}
- for (sid = 0; sid < DART_MAX_STREAMS; sid++) {
+ for (sid = 0; sid < dart->num_streams; sid++) {
for (idx = 0; idx < DART_MAX_TTBR; idx++)
writel(dart->save_ttbr[sid][idx],
dart->regs + DART_TTBR(sid, idx));
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 460/885] iommu/dart: Fix apple_dart_device_group for PCI groups
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (458 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 459/885] iommu: dart: Support >64 stream IDs Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 461/885] iommu/vt-d: Set No Execute Enable bit in PASID table entry Greg Kroah-Hartman
` (427 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sven Peter, Eric Curtin,
Joerg Roedel, Sasha Levin
From: Sven Peter <sven@svenpeter.dev>
[ Upstream commit cf5c1c87c2391649e05e58ecc6dfc3dc5ebebc05 ]
pci_device_group() can return an already existing IOMMU group if the PCI
device's pagetables have to be shared with another one due to bus
toplogy, isolation features and/or DMA alias quirks.
apple_dart_device_group() however assumes that the group has just been
created and overwrites its iommudata which will eventually lead to
apple_dart_release_group leaving stale entries in sid2group.
Fix that by merging the iommudata if the returned group already exists.
Fixes: f0b636804c7c ("iommu/dart: Clear sid2group entry when a group is freed")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Link: https://lore.kernel.org/r/20230128113532.94651-1-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/apple-dart.c | 51 ++++++++++++++++++++++++++++++++------
1 file changed, 44 insertions(+), 7 deletions(-)
diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c
index 80e4436ee4de7..06ca73bddb5a5 100644
--- a/drivers/iommu/apple-dart.c
+++ b/drivers/iommu/apple-dart.c
@@ -689,6 +689,29 @@ static void apple_dart_release_group(void *iommu_data)
mutex_unlock(&apple_dart_groups_lock);
}
+static int apple_dart_merge_master_cfg(struct apple_dart_master_cfg *dst,
+ struct apple_dart_master_cfg *src)
+{
+ /*
+ * We know that this function is only called for groups returned from
+ * pci_device_group and that all Apple Silicon platforms never spread
+ * PCIe devices from the same bus across multiple DARTs such that we can
+ * just assume that both src and dst only have the same single DART.
+ */
+ if (src->stream_maps[1].dart)
+ return -EINVAL;
+ if (dst->stream_maps[1].dart)
+ return -EINVAL;
+ if (src->stream_maps[0].dart != dst->stream_maps[0].dart)
+ return -EINVAL;
+
+ bitmap_or(dst->stream_maps[0].sidmap,
+ dst->stream_maps[0].sidmap,
+ src->stream_maps[0].sidmap,
+ dst->stream_maps[0].dart->num_streams);
+ return 0;
+}
+
static struct iommu_group *apple_dart_device_group(struct device *dev)
{
int i, sid;
@@ -730,14 +753,28 @@ static struct iommu_group *apple_dart_device_group(struct device *dev)
if (!group)
goto out;
- group_master_cfg = kmemdup(cfg, sizeof(*group_master_cfg), GFP_KERNEL);
- if (!group_master_cfg) {
- iommu_group_put(group);
- goto out;
- }
+ group_master_cfg = iommu_group_get_iommudata(group);
+ if (group_master_cfg) {
+ int ret;
- iommu_group_set_iommudata(group, group_master_cfg,
- apple_dart_release_group);
+ ret = apple_dart_merge_master_cfg(group_master_cfg, cfg);
+ if (ret) {
+ dev_err(dev, "Failed to merge DART IOMMU grups.\n");
+ iommu_group_put(group);
+ res = ERR_PTR(ret);
+ goto out;
+ }
+ } else {
+ group_master_cfg = kmemdup(cfg, sizeof(*group_master_cfg),
+ GFP_KERNEL);
+ if (!group_master_cfg) {
+ iommu_group_put(group);
+ goto out;
+ }
+
+ iommu_group_set_iommudata(group, group_master_cfg,
+ apple_dart_release_group);
+ }
for_each_stream_map(i, cfg, stream_map)
for_each_set_bit(sid, stream_map->sidmap, stream_map->dart->num_streams)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 461/885] iommu/vt-d: Set No Execute Enable bit in PASID table entry
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (459 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 460/885] iommu/dart: Fix apple_dart_device_group for PCI groups Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 462/885] power: supply: remove faulty cooling logic Greg Kroah-Hartman
` (426 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ashok Raj, Lu Baolu, Kevin Tian,
Joerg Roedel, Sasha Levin
From: Lu Baolu <baolu.lu@linux.intel.com>
[ Upstream commit e06d24435596c8afcaa81c0c498f5b0ec4ee2b7c ]
Setup No Execute Enable bit (Bit 133) of a scalable mode PASID entry.
This is to allow the use of XD bit of the first level page table.
Fixes: ddf09b6d43ec ("iommu/vt-d: Setup pasid entries for iova over first level")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230126095438.354205-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/intel/pasid.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index e13d7e5273e19..13a5a4e05fe9a 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -362,6 +362,16 @@ static inline void pasid_set_page_snoop(struct pasid_entry *pe, bool value)
pasid_set_bits(&pe->val[1], 1 << 23, value << 23);
}
+/*
+ * Setup No Execute Enable bit (Bit 133) of a scalable mode PASID
+ * entry. It is required when XD bit of the first level page table
+ * entry is about to be set.
+ */
+static inline void pasid_set_nxe(struct pasid_entry *pe)
+{
+ pasid_set_bits(&pe->val[2], 1 << 5, 1 << 5);
+}
+
/*
* Setup the Page Snoop (PGSNP) field (Bit 88) of a scalable mode
* PASID entry.
@@ -555,6 +565,7 @@ int intel_pasid_setup_first_level(struct intel_iommu *iommu,
pasid_set_domain_id(pte, did);
pasid_set_address_width(pte, iommu->agaw);
pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap));
+ pasid_set_nxe(pte);
/* Setup Present and PASID Granular Transfer Type: */
pasid_set_translation_type(pte, PASID_ENTRY_PGTT_FL_ONLY);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 462/885] power: supply: remove faulty cooling logic
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (460 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 461/885] iommu/vt-d: Set No Execute Enable bit in PASID table entry Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 463/885] RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish() Greg Kroah-Hartman
` (425 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andreas Kemnade, Sebastian Reichel,
Sasha Levin
From: Andreas Kemnade <andreas@kemnade.info>
[ Upstream commit c85c191694cb1cf290b11059b3d2de8a2732ffd0 ]
The rn5t618 power driver fails to register
a cooling device because POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX
is missing but availability is not checked before registering
cooling device. After improved error checking in the thermal
code, the registration of the power supply fails entirely.
Checking for availability of _MAX before registering cooling device
fixes the rn5t618 problem. But the whole logic feels questionable.
First, the logic is inverted here:
the code tells: max_current = max_cooling but
0 = max_cooling, so there needs to be some inversion
in the code which cannot be found. Comparing with other
cooling devices, it can be found that value for fan speed is not
inverted, value for cpufreq cooling is inverted (similar situation
as here lowest frequency = max cooling)
Second, analyzing usage of _MAX: it is seems that maximum capabilities
of charging controller are specified and not of the battery. Probably
there is not too much mismatch in the drivers actually implementing
that. So nothing has exploded yet. So there is no easy and safe way
to specifify a max cooling value now.
Conclusion for now (as a regression fix) just remove the cooling device
registration and do it properly later on.
Fixes: e49a1e1ee078 ("thermal/core: fix error code in __thermal_cooling_device_register()")
Fixes: 952aeeb3ee28 ("power_supply: Register power supply for thermal cooling device")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/power/supply/power_supply_core.c | 93 ------------------------
1 file changed, 93 deletions(-)
diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
index 01d1ac79d982e..8382be867d274 100644
--- a/drivers/power/supply/power_supply_core.c
+++ b/drivers/power/supply/power_supply_core.c
@@ -1187,83 +1187,6 @@ static void psy_unregister_thermal(struct power_supply *psy)
thermal_zone_device_unregister(psy->tzd);
}
-/* thermal cooling device callbacks */
-static int ps_get_max_charge_cntl_limit(struct thermal_cooling_device *tcd,
- unsigned long *state)
-{
- struct power_supply *psy;
- union power_supply_propval val;
- int ret;
-
- psy = tcd->devdata;
- ret = power_supply_get_property(psy,
- POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, &val);
- if (ret)
- return ret;
-
- *state = val.intval;
-
- return ret;
-}
-
-static int ps_get_cur_charge_cntl_limit(struct thermal_cooling_device *tcd,
- unsigned long *state)
-{
- struct power_supply *psy;
- union power_supply_propval val;
- int ret;
-
- psy = tcd->devdata;
- ret = power_supply_get_property(psy,
- POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, &val);
- if (ret)
- return ret;
-
- *state = val.intval;
-
- return ret;
-}
-
-static int ps_set_cur_charge_cntl_limit(struct thermal_cooling_device *tcd,
- unsigned long state)
-{
- struct power_supply *psy;
- union power_supply_propval val;
- int ret;
-
- psy = tcd->devdata;
- val.intval = state;
- ret = psy->desc->set_property(psy,
- POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, &val);
-
- return ret;
-}
-
-static const struct thermal_cooling_device_ops psy_tcd_ops = {
- .get_max_state = ps_get_max_charge_cntl_limit,
- .get_cur_state = ps_get_cur_charge_cntl_limit,
- .set_cur_state = ps_set_cur_charge_cntl_limit,
-};
-
-static int psy_register_cooler(struct power_supply *psy)
-{
- /* Register for cooling device if psy can control charging */
- if (psy_has_property(psy->desc, POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT)) {
- psy->tcd = thermal_cooling_device_register(
- (char *)psy->desc->name,
- psy, &psy_tcd_ops);
- return PTR_ERR_OR_ZERO(psy->tcd);
- }
-
- return 0;
-}
-
-static void psy_unregister_cooler(struct power_supply *psy)
-{
- if (IS_ERR_OR_NULL(psy->tcd))
- return;
- thermal_cooling_device_unregister(psy->tcd);
-}
#else
static int psy_register_thermal(struct power_supply *psy)
{
@@ -1273,15 +1196,6 @@ static int psy_register_thermal(struct power_supply *psy)
static void psy_unregister_thermal(struct power_supply *psy)
{
}
-
-static int psy_register_cooler(struct power_supply *psy)
-{
- return 0;
-}
-
-static void psy_unregister_cooler(struct power_supply *psy)
-{
-}
#endif
static struct power_supply *__must_check
@@ -1355,10 +1269,6 @@ __power_supply_register(struct device *parent,
if (rc)
goto register_thermal_failed;
- rc = psy_register_cooler(psy);
- if (rc)
- goto register_cooler_failed;
-
rc = power_supply_create_triggers(psy);
if (rc)
goto create_triggers_failed;
@@ -1388,8 +1298,6 @@ __power_supply_register(struct device *parent,
add_hwmon_sysfs_failed:
power_supply_remove_triggers(psy);
create_triggers_failed:
- psy_unregister_cooler(psy);
-register_cooler_failed:
psy_unregister_thermal(psy);
register_thermal_failed:
wakeup_init_failed:
@@ -1541,7 +1449,6 @@ void power_supply_unregister(struct power_supply *psy)
sysfs_remove_link(&psy->dev.kobj, "powers");
power_supply_remove_hwmon_sysfs(psy);
power_supply_remove_triggers(psy);
- psy_unregister_cooler(psy);
psy_unregister_thermal(psy);
device_init_wakeup(&psy->dev, false);
device_unregister(&psy->dev);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 463/885] RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (461 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 462/885] power: supply: remove faulty cooling logic Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 464/885] usb: max-3421: Fix setting of I/O pins Greg Kroah-Hartman
` (424 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nikita Zhandarovich,
Leon Romanovsky, Sasha Levin
From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
[ Upstream commit 283861a4c52c1ea4df3dd1b6fc75a50796ce3524 ]
If get_ep_from_tid() fails to lookup non-NULL value for ep, ep is
dereferenced later regardless of whether it is empty.
This patch adds a simple sanity check to fix the issue.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 944661dd97f4 ("RDMA/iw_cxgb4: atomically lookup ep and get a reference")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230202184850.29882-1-n.zhandarovich@fintech.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/cxgb4/cm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index ea3ddf0d24114..ced615b5ea096 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -2676,6 +2676,9 @@ static int pass_establish(struct c4iw_dev *dev, struct sk_buff *skb)
u16 tcp_opt = ntohs(req->tcp_opt);
ep = get_ep_from_tid(dev, tid);
+ if (!ep)
+ return 0;
+
pr_debug("ep %p tid %u\n", ep, ep->hwtid);
ep->snd_seq = be32_to_cpu(req->snd_isn);
ep->rcv_seq = be32_to_cpu(req->rcv_isn);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 464/885] usb: max-3421: Fix setting of I/O pins
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (462 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 463/885] RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish() Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 465/885] RDMA/irdma: Cap MSIX used to online CPUs + 1 Greg Kroah-Hartman
` (423 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Mark Tomlinson, Sasha Levin
From: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
[ Upstream commit a7efe3fc7cbe27c6eb2c2a3ab612194f8f800f4c ]
To update the I/O pins, the registers are read/modified/written. The
read operation incorrectly always read the first register. Although
wrong, there wasn't any impact as all the output pins are always
written, and the inputs are read only anyway.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20230207033337.18112-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/max3421-hcd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 352e3ac2b377b..19111e83ac131 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -1436,7 +1436,7 @@ max3421_spi_thread(void *dev_id)
* use spi_wr_buf().
*/
for (i = 0; i < ARRAY_SIZE(max3421_hcd->iopins); ++i) {
- u8 val = spi_rd8(hcd, MAX3421_REG_IOPINS1);
+ u8 val = spi_rd8(hcd, MAX3421_REG_IOPINS1 + i);
val = ((val & 0xf0) |
(max3421_hcd->iopins[i] & 0x0f));
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 465/885] RDMA/irdma: Cap MSIX used to online CPUs + 1
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (463 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 464/885] usb: max-3421: Fix setting of I/O pins Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 466/885] serial: fsl_lpuart: fix RS485 RTS polariy inverse issue Greg Kroah-Hartman
` (422 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mustafa Ismail, Shiraz Saleem,
Sindhu Devale, Leon Romanovsky, Sasha Levin
From: Mustafa Ismail <mustafa.ismail@intel.com>
[ Upstream commit 9cd9842c46996ef62173c36619c746f57416bcb0 ]
The irdma driver can use a maximum number of msix vectors equal
to num_online_cpus() + 1 and the kernel warning stack below is shown
if that number is exceeded.
The kernel throws a warning as the driver tries to update the affinity
hint with a CPU mask greater than the max CPU IDs. Fix this by capping
the MSIX vectors to num_online_cpus() + 1.
WARNING: CPU: 7 PID: 23655 at include/linux/cpumask.h:106 irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma]
RIP: 0010:irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma]
Call Trace:
irdma_rt_init_hw+0xa62/0x1290 [irdma]
? irdma_alloc_local_mac_entry+0x1a0/0x1a0 [irdma]
? __is_kernel_percpu_address+0x63/0x310
? rcu_read_lock_held_common+0xe/0xb0
? irdma_lan_unregister_qset+0x280/0x280 [irdma]
? irdma_request_reset+0x80/0x80 [irdma]
? ice_get_qos_params+0x84/0x390 [ice]
irdma_probe+0xa40/0xfc0 [irdma]
? rcu_read_lock_bh_held+0xd0/0xd0
? irdma_remove+0x140/0x140 [irdma]
? rcu_read_lock_sched_held+0x62/0xe0
? down_write+0x187/0x3d0
? auxiliary_match_id+0xf0/0x1a0
? irdma_remove+0x140/0x140 [irdma]
auxiliary_bus_probe+0xa6/0x100
__driver_probe_device+0x4a4/0xd50
? __device_attach_driver+0x2c0/0x2c0
driver_probe_device+0x4a/0x110
__driver_attach+0x1aa/0x350
bus_for_each_dev+0x11d/0x1b0
? subsys_dev_iter_init+0xe0/0xe0
bus_add_driver+0x3b1/0x610
driver_register+0x18e/0x410
? 0xffffffffc0b88000
irdma_init_module+0x50/0xaa [irdma]
do_one_initcall+0x103/0x5f0
? perf_trace_initcall_level+0x420/0x420
? do_init_module+0x4e/0x700
? __kasan_kmalloc+0x7d/0xa0
? kmem_cache_alloc_trace+0x188/0x2b0
? kasan_unpoison+0x21/0x50
do_init_module+0x1d1/0x700
load_module+0x3867/0x5260
? layout_and_allocate+0x3990/0x3990
? rcu_read_lock_held_common+0xe/0xb0
? rcu_read_lock_sched_held+0x62/0xe0
? rcu_read_lock_bh_held+0xd0/0xd0
? __vmalloc_node_range+0x46b/0x890
? lock_release+0x5c8/0xba0
? alloc_vm_area+0x120/0x120
? selinux_kernel_module_from_file+0x2a5/0x300
? __inode_security_revalidate+0xf0/0xf0
? __do_sys_init_module+0x1db/0x260
__do_sys_init_module+0x1db/0x260
? load_module+0x5260/0x5260
? do_syscall_64+0x22/0x450
do_syscall_64+0xa5/0x450
entry_SYSCALL_64_after_hwframe+0x66/0xdb
Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Link: https://lore.kernel.org/r/20230207201938.1329-1-sindhu.devale@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/irdma/hw.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c
index ab246447520bd..2e1e2bad04011 100644
--- a/drivers/infiniband/hw/irdma/hw.c
+++ b/drivers/infiniband/hw/irdma/hw.c
@@ -483,6 +483,8 @@ static int irdma_save_msix_info(struct irdma_pci_f *rf)
iw_qvlist->num_vectors = rf->msix_count;
if (rf->msix_count <= num_online_cpus())
rf->msix_shared = true;
+ else if (rf->msix_count > num_online_cpus() + 1)
+ rf->msix_count = num_online_cpus() + 1;
pmsix = rf->msix_entries;
for (i = 0, ceq_idx = 0; i < rf->msix_count; i++, iw_qvinfo++) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 466/885] serial: fsl_lpuart: fix RS485 RTS polariy inverse issue
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (464 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 465/885] RDMA/irdma: Cap MSIX used to online CPUs + 1 Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 467/885] tty: serial: imx: Handle RS485 DE signal active high Greg Kroah-Hartman
` (421 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Sherry Sun, Shenwei Wang, Sasha Levin
From: Shenwei Wang <shenwei.wang@nxp.com>
[ Upstream commit 3957b9501a5a8fa709ae4a47483714491471f6db ]
The previous 'commit 846651eca073 ("serial: fsl_lpuart: RS485 RTS
polariy is inverse")' only fixed the inverse issue on lpuart 8bit
platforms.
This is a follow-up patch to fix the RS485 polarity inverse
issue on lpuart 32bit platforms.
Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485")
Reported-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20230207162420.3647904-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/fsl_lpuart.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index f6ac46879dc7b..13a6cd0116a13 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1393,9 +1393,9 @@ static int lpuart32_config_rs485(struct uart_port *port, struct ktermios *termio
* Note: UART is assumed to be active high.
*/
if (rs485->flags & SER_RS485_RTS_ON_SEND)
- modem &= ~UARTMODEM_TXRTSPOL;
- else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
modem |= UARTMODEM_TXRTSPOL;
+ else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+ modem &= ~UARTMODEM_TXRTSPOL;
}
lpuart32_write(&sport->port, modem, UARTMODIR);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 467/885] tty: serial: imx: Handle RS485 DE signal active high
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (465 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 466/885] serial: fsl_lpuart: fix RS485 RTS polariy inverse issue Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 468/885] tty: serial: imx: disable Ageing Timer interrupt request irq Greg Kroah-Hartman
` (420 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christoph Niedermaier,
Fabio Estevam, Marek Vasut, Sasha Levin
From: Marek Vasut <marex@denx.de>
[ Upstream commit 79d0224f6bf296d04cd843cfc49921b19c97bb09 ]
The default polarity of RS485 DE signal is active high. This driver does
not handle such case properly. Currently, when a pin is multiplexed as a
UART CTS_B on boot, this pin is pulled HIGH by the i.MX UART CTS circuit,
which activates DE signal on the RS485 transceiver and thus behave as if
the RS485 was transmitting data, so the system blocks the RS485 bus when
it starts and until user application takes over. This behavior is not OK.
The problem consists of two separate parts.
First, the i.MX UART IP requires UCR1 UARTEN and UCR2 RXEN to be set for
UCR2 CTSC and CTS bits to have any effect. The UCR2 CTSC bit permits the
driver to set CTS (RTS_B or RS485 DE signal) to either level sychronous
to the internal UART IP clock. Compared to other options, like GPIO CTS
control, this has the benefit of being synchronous to the UART IP clock
and thus without glitches or bus delays. The reason for the CTS design
is likely because when the Receiver is disabled, the UART IP can never
indicate that it is ready to receive data by assering CTS signal, so
the CTS is always pulled HIGH by default.
When the port is closed by user space, imx_uart_stop_rx() clears UCR2
RXEN bit, and imx_uart_shutdown() clears UCR1 UARTEN bit. This disables
UART Receiver and UART itself, and forces CTS signal HIGH, which leads
to the RS485 bus being blocked because RS485 DE is incorrectly active.
The proposed solution for this problem is to keep the Receiver running
even after the port is closed, but in loopback mode. This disconnects
the RX FIFO input from the RXD external signal, and since UCR2 TXEN is
cleared, the UART Transmitter is disabled, so nothing can feed data in
the RX FIFO. Because the Receiver is still enabled, the UCR2 CTSC and
CTS bits still have effect and the CTS (RS485 DE) control is retained.
Note that in case of RS485 DE signal active low, there is no problem and
no special handling is necessary. The CTS signal defaults to HIGH, thus
the RS485 is by default set to Receive and the bus is not blocked.
Note that while there is the possibility to control CTS using GPIO with
either CTS polarity, this has the downside of not being synchronous to
the UART IP clock and thus glitchy and susceptible to slow DE switching.
Second, on boot, before the UART driver probe callback is called, the
driver core triggers pinctrl_init_done() and configures the IOMUXC to
default state. At this point, UCR1 UARTEN and UCR2 RXEN are both still
cleared, but UART CTS_B (RS485 DE) is configured as CTS function, thus
the RTS signal is pulled HIGH by the UART IP CTS circuit.
One part of the solution here is to enable UCR1 UARTEN and UCR2 RXEN and
UTS loopback in this driver probe callback, thus unblocking the CTSC and
CTS control early on. But this is still too late, since the pin control
is already configured and CTS has been pulled HIGH for a short period
of time.
When Linux kernel boots and this driver is bound, the pin control is set
to special "init" state if the state is available, and driver can switch
the "default" state afterward when ready. This state can be used to set
the CTS line as a GPIO in DT temporarily, and a GPIO hog can force such
GPIO to LOW, thus keeping the RS485 DE line LOW early on boot. Once the
driver takes over and UCR1 UARTEN and UCR2 RXEN and UTS loopback are all
enabled, the driver can switch to "default" pin control state and control
the CTS line as function instead. DT binding example is below:
"
&gpio6 {
rts-init-hog {
gpio-hog;
gpios = <5 0>;
output-low;
line-name = "rs485-de";
};
};
&uart5 { /* DHCOM UART2 */
pinctrl-0 = <&pinctrl_uart5>;
pinctrl-1 = <&pinctrl_uart5_init>;
pinctrl-names = "default", "init";
...
};
pinctrl_uart5_init: uart5-init-grp {
fsl,pins = <
...
MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x30b1
>;
};
pinctrl_uart5: uart5-grp {
fsl,pins = <
...
MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x30b1
>;
};
"
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220929144400.13571-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: ef25e16ea967 ("tty: serial: imx: disable Ageing Timer interrupt request irq")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/imx.c | 64 ++++++++++++++++++++++++++++++++++++----
1 file changed, 58 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index aadda66405b47..f3f03cef3c7a9 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -489,7 +489,7 @@ static void imx_uart_stop_tx(struct uart_port *port)
static void imx_uart_stop_rx(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
- u32 ucr1, ucr2, ucr4;
+ u32 ucr1, ucr2, ucr4, uts;
ucr1 = imx_uart_readl(sport, UCR1);
ucr2 = imx_uart_readl(sport, UCR2);
@@ -505,7 +505,18 @@ static void imx_uart_stop_rx(struct uart_port *port)
imx_uart_writel(sport, ucr1, UCR1);
imx_uart_writel(sport, ucr4, UCR4);
- ucr2 &= ~UCR2_RXEN;
+ /* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */
+ if (port->rs485.flags & SER_RS485_ENABLED &&
+ port->rs485.flags & SER_RS485_RTS_ON_SEND &&
+ sport->have_rtscts && !sport->have_rtsgpio) {
+ uts = imx_uart_readl(sport, imx_uart_uts_reg(sport));
+ uts |= UTS_LOOP;
+ imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
+ ucr2 |= UCR2_RXEN;
+ } else {
+ ucr2 &= ~UCR2_RXEN;
+ }
+
imx_uart_writel(sport, ucr2, UCR2);
}
@@ -1393,7 +1404,7 @@ static int imx_uart_startup(struct uart_port *port)
int retval, i;
unsigned long flags;
int dma_is_inited = 0;
- u32 ucr1, ucr2, ucr3, ucr4;
+ u32 ucr1, ucr2, ucr3, ucr4, uts;
retval = clk_prepare_enable(sport->clk_per);
if (retval)
@@ -1498,6 +1509,11 @@ static int imx_uart_startup(struct uart_port *port)
imx_uart_writel(sport, ucr2, UCR2);
}
+ /* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */
+ uts = imx_uart_readl(sport, imx_uart_uts_reg(sport));
+ uts &= ~UTS_LOOP;
+ imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
+
spin_unlock_irqrestore(&sport->port.lock, flags);
return 0;
@@ -1507,7 +1523,7 @@ static void imx_uart_shutdown(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
unsigned long flags;
- u32 ucr1, ucr2, ucr4;
+ u32 ucr1, ucr2, ucr4, uts;
if (sport->dma_is_enabled) {
dmaengine_terminate_sync(sport->dma_chan_tx);
@@ -1551,7 +1567,18 @@ static void imx_uart_shutdown(struct uart_port *port)
spin_lock_irqsave(&sport->port.lock, flags);
ucr1 = imx_uart_readl(sport, UCR1);
- ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN | UCR1_RXDMAEN | UCR1_ATDMAEN);
+ ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_RXDMAEN | UCR1_ATDMAEN);
+ /* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */
+ if (port->rs485.flags & SER_RS485_ENABLED &&
+ port->rs485.flags & SER_RS485_RTS_ON_SEND &&
+ sport->have_rtscts && !sport->have_rtsgpio) {
+ uts = imx_uart_readl(sport, imx_uart_uts_reg(sport));
+ uts |= UTS_LOOP;
+ imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
+ ucr1 |= UCR1_UARTEN;
+ } else {
+ ucr1 &= ~UCR1_UARTEN;
+ }
imx_uart_writel(sport, ucr1, UCR1);
ucr4 = imx_uart_readl(sport, UCR4);
@@ -2213,7 +2240,7 @@ static int imx_uart_probe(struct platform_device *pdev)
void __iomem *base;
u32 dma_buf_conf[2];
int ret = 0;
- u32 ucr1;
+ u32 ucr1, ucr2, uts;
struct resource *res;
int txirq, rxirq, rtsirq;
@@ -2350,6 +2377,31 @@ static int imx_uart_probe(struct platform_device *pdev)
ucr1 &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN | UCR1_RTSDEN);
imx_uart_writel(sport, ucr1, UCR1);
+ /*
+ * In case RS485 is enabled without GPIO RTS control, the UART IP
+ * is used to control CTS signal. Keep both the UART and Receiver
+ * enabled, otherwise the UART IP pulls CTS signal always HIGH no
+ * matter how the UCR2 CTSC and CTS bits are set. To prevent any
+ * data from being fed into the RX FIFO, enable loopback mode in
+ * UTS register, which disconnects the RX path from external RXD
+ * pin and connects it to the Transceiver, which is disabled, so
+ * no data can be fed to the RX FIFO that way.
+ */
+ if (sport->port.rs485.flags & SER_RS485_ENABLED &&
+ sport->have_rtscts && !sport->have_rtsgpio) {
+ uts = imx_uart_readl(sport, imx_uart_uts_reg(sport));
+ uts |= UTS_LOOP;
+ imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
+
+ ucr1 = imx_uart_readl(sport, UCR1);
+ ucr1 |= UCR1_UARTEN;
+ imx_uart_writel(sport, ucr1, UCR1);
+
+ ucr2 = imx_uart_readl(sport, UCR2);
+ ucr2 |= UCR2_RXEN;
+ imx_uart_writel(sport, ucr2, UCR2);
+ }
+
if (!imx_uart_is_imx1(sport) && sport->dte_mode) {
/*
* The DCEDTE bit changes the direction of DSR, DCD, DTR and RI
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 468/885] tty: serial: imx: disable Ageing Timer interrupt request irq
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (466 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 467/885] tty: serial: imx: Handle RS485 DE signal active high Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 469/885] driver core: fw_devlink: Add DL_FLAG_CYCLE support to device links Greg Kroah-Hartman
` (419 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sherry Sun, Peng Fan, Jason Liu,
Sasha Levin
From: Peng Fan <peng.fan@nxp.com>
[ Upstream commit ef25e16ea9674b713a68c3bda821556ce9901254 ]
There maybe pending USR interrupt before requesting irq, however
uart_add_one_port has not executed, so there will be kernel panic:
[ 0.795668] Unable to handle kernel NULL pointer dereference at virtual addre
ss 0000000000000080
[ 0.802701] Mem abort info:
[ 0.805367] ESR = 0x0000000096000004
[ 0.808950] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.814033] SET = 0, FnV = 0
[ 0.816950] EA = 0, S1PTW = 0
[ 0.819950] FSC = 0x04: level 0 translation fault
[ 0.824617] Data abort info:
[ 0.827367] ISV = 0, ISS = 0x00000004
[ 0.831033] CM = 0, WnR = 0
[ 0.833866] [0000000000000080] user address but active_mm is swapper
[ 0.839951] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 0.845953] Modules linked in:
[ 0.848869] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.1+g56321e101aca #1
[ 0.855617] Hardware name: Freescale i.MX8MP EVK (DT)
[ 0.860452] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.867117] pc : __imx_uart_rxint.constprop.0+0x11c/0x2c0
[ 0.872283] lr : imx_uart_int+0xf8/0x1ec
The issue only happends in the inmate linux when Jailhouse hypervisor
enabled. The test procedure is:
while true; do
jailhouse enable imx8mp.cell
jailhouse cell linux xxxx
sleep 10
jailhouse cell destroy 1
jailhouse disable
sleep 5
done
And during the upper test, press keys to the 2nd linux console.
When `jailhouse cell destroy 1`, the 2nd linux has no chance to put
the uart to a quiese state, so USR1/2 may has pending interrupts. Then
when `jailhosue cell linux xx` to start 2nd linux again, the issue
trigger.
In order to disable irqs before requesting them, both UCR1 and UCR2 irqs
should be disabled, so here fix that, disable the Ageing Timer interrupt
in UCR2 as UCR1 does.
Fixes: 8a61f0c70ae6 ("serial: imx: Disable irqs before requesting them")
Suggested-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Link: https://lore.kernel.org/r/20230206013016.29352-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/imx.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index f3f03cef3c7a9..f07c4f9ff13c0 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2377,6 +2377,11 @@ static int imx_uart_probe(struct platform_device *pdev)
ucr1 &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN | UCR1_RTSDEN);
imx_uart_writel(sport, ucr1, UCR1);
+ /* Disable Ageing Timer interrupt */
+ ucr2 = imx_uart_readl(sport, UCR2);
+ ucr2 &= ~UCR2_ATEN;
+ imx_uart_writel(sport, ucr2, UCR2);
+
/*
* In case RS485 is enabled without GPIO RTS control, the UART IP
* is used to control CTS signal. Keep both the UART and Receiver
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 469/885] driver core: fw_devlink: Add DL_FLAG_CYCLE support to device links
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (467 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 468/885] tty: serial: imx: disable Ageing Timer interrupt request irq Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 470/885] driver core: fw_devlink: Dont purge child fwnodes consumer links Greg Kroah-Hartman
` (418 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Saravana Kannan, Colin Foster,
Sudeep Holla, Douglas Anderson, Geert Uytterhoeven, Sasha Levin,
Luca Weiss
From: Saravana Kannan <saravanak@google.com>
[ Upstream commit 67cad5c67019c38126b749621665b6723d3ae7e6 ]
fw_devlink uses DL_FLAG_SYNC_STATE_ONLY device link flag for two
purposes:
1. To allow a parent device to proxy its child device's dependency on a
supplier so that the supplier doesn't get its sync_state() callback
before the child device/consumer can be added and probed. In this
usage scenario, we need to ignore cycles for ensure correctness of
sync_state() callbacks.
2. When there are dependency cycles in firmware, we don't know which of
those dependencies are valid. So, we have to ignore them all wrt
probe ordering while still making sure the sync_state() callbacks
come correctly.
However, when detecting dependency cycles, there can be multiple
dependency cycles between two devices that we need to detect. For
example:
A -> B -> A and A -> C -> B -> A.
To detect multiple cycles correct, we need to be able to differentiate
DL_FLAG_SYNC_STATE_ONLY device links used for (1) vs (2) above.
To allow this differentiation, add a DL_FLAG_CYCLE that can be use to
mark use case (2). We can then use the DL_FLAG_CYCLE to decide which
DL_FLAG_SYNC_STATE_ONLY device links to follow when looking for
dependency cycles.
Fixes: 2de9d8e0d2fe ("driver core: fw_devlink: Improve handling of cyclic dependencies")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-6-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/core.c | 28 ++++++++++++++++++----------
include/linux/device.h | 1 +
2 files changed, 19 insertions(+), 10 deletions(-)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 9019b81405bf2..816b0288579fd 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -271,6 +271,12 @@ static bool device_is_ancestor(struct device *dev, struct device *target)
return false;
}
+static inline bool device_link_flag_is_sync_state_only(u32 flags)
+{
+ return (flags & ~(DL_FLAG_INFERRED | DL_FLAG_CYCLE)) ==
+ (DL_FLAG_SYNC_STATE_ONLY | DL_FLAG_MANAGED);
+}
+
/**
* device_is_dependent - Check if one device depends on another one
* @dev: Device to check dependencies for.
@@ -297,8 +303,7 @@ int device_is_dependent(struct device *dev, void *target)
return ret;
list_for_each_entry(link, &dev->links.consumers, s_node) {
- if ((link->flags & ~DL_FLAG_INFERRED) ==
- (DL_FLAG_SYNC_STATE_ONLY | DL_FLAG_MANAGED))
+ if (device_link_flag_is_sync_state_only(link->flags))
continue;
if (link->consumer == target)
@@ -371,8 +376,7 @@ static int device_reorder_to_tail(struct device *dev, void *not_used)
device_for_each_child(dev, NULL, device_reorder_to_tail);
list_for_each_entry(link, &dev->links.consumers, s_node) {
- if ((link->flags & ~DL_FLAG_INFERRED) ==
- (DL_FLAG_SYNC_STATE_ONLY | DL_FLAG_MANAGED))
+ if (device_link_flag_is_sync_state_only(link->flags))
continue;
device_reorder_to_tail(link->consumer, NULL);
}
@@ -633,7 +637,8 @@ postcore_initcall(devlink_class_init);
DL_FLAG_AUTOREMOVE_SUPPLIER | \
DL_FLAG_AUTOPROBE_CONSUMER | \
DL_FLAG_SYNC_STATE_ONLY | \
- DL_FLAG_INFERRED)
+ DL_FLAG_INFERRED | \
+ DL_FLAG_CYCLE)
#define DL_ADD_VALID_FLAGS (DL_MANAGED_LINK_FLAGS | DL_FLAG_STATELESS | \
DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE)
@@ -702,8 +707,6 @@ struct device_link *device_link_add(struct device *consumer,
if (!consumer || !supplier || consumer == supplier ||
flags & ~DL_ADD_VALID_FLAGS ||
(flags & DL_FLAG_STATELESS && flags & DL_MANAGED_LINK_FLAGS) ||
- (flags & DL_FLAG_SYNC_STATE_ONLY &&
- (flags & ~DL_FLAG_INFERRED) != DL_FLAG_SYNC_STATE_ONLY) ||
(flags & DL_FLAG_AUTOPROBE_CONSUMER &&
flags & (DL_FLAG_AUTOREMOVE_CONSUMER |
DL_FLAG_AUTOREMOVE_SUPPLIER)))
@@ -719,6 +722,10 @@ struct device_link *device_link_add(struct device *consumer,
if (!(flags & DL_FLAG_STATELESS))
flags |= DL_FLAG_MANAGED;
+ if (flags & DL_FLAG_SYNC_STATE_ONLY &&
+ !device_link_flag_is_sync_state_only(flags))
+ return NULL;
+
device_links_write_lock();
device_pm_lock();
@@ -1671,7 +1678,7 @@ static void fw_devlink_relax_link(struct device_link *link)
if (!(link->flags & DL_FLAG_INFERRED))
return;
- if (link->flags == (DL_FLAG_MANAGED | FW_DEVLINK_FLAGS_PERMISSIVE))
+ if (device_link_flag_is_sync_state_only(link->flags))
return;
pm_runtime_drop_link(link);
@@ -1795,8 +1802,8 @@ static int fw_devlink_relax_cycle(struct device *con, void *sup)
return ret;
list_for_each_entry(link, &con->links.consumers, s_node) {
- if ((link->flags & ~DL_FLAG_INFERRED) ==
- (DL_FLAG_SYNC_STATE_ONLY | DL_FLAG_MANAGED))
+ if (!(link->flags & DL_FLAG_CYCLE) &&
+ device_link_flag_is_sync_state_only(link->flags))
continue;
if (!fw_devlink_relax_cycle(link->consumer, sup))
@@ -1805,6 +1812,7 @@ static int fw_devlink_relax_cycle(struct device *con, void *sup)
ret = 1;
fw_devlink_relax_link(link);
+ link->flags |= DL_FLAG_CYCLE;
}
return ret;
}
diff --git a/include/linux/device.h b/include/linux/device.h
index 424b55df02727..7cf24330d6814 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -327,6 +327,7 @@ enum device_link_state {
#define DL_FLAG_MANAGED BIT(6)
#define DL_FLAG_SYNC_STATE_ONLY BIT(7)
#define DL_FLAG_INFERRED BIT(8)
+#define DL_FLAG_CYCLE BIT(9)
/**
* enum dl_dev_state - Device driver presence tracking information.
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 470/885] driver core: fw_devlink: Dont purge child fwnodes consumer links
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (468 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 469/885] driver core: fw_devlink: Add DL_FLAG_CYCLE support to device links Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 471/885] driver core: fw_devlink: Allow marking a fwnode link as being part of a cycle Greg Kroah-Hartman
` (417 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Saravana Kannan, Colin Foster,
Sudeep Holla, Douglas Anderson, Geert Uytterhoeven, Sasha Levin,
Luca Weiss
From: Saravana Kannan <saravanak@google.com>
[ Upstream commit 3a2dbc510c437ca392516b0105bad8e7970e6614 ]
When a device X is bound successfully to a driver, if it has a child
firmware node Y that doesn't have a struct device created by then, we
delete fwnode links where the child firmware node Y is the supplier. We
did this to avoid blocking the consumers of the child firmware node Y
from deferring probe indefinitely.
While that a step in the right direction, it's better to make the
consumers of the child firmware node Y to be consumers of the device X
because device X is probably implementing whatever functionality is
represented by child firmware node Y. By doing this, we capture the
device dependencies more accurately and ensure better
probe/suspend/resume ordering.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 6a6dfdf8b3ff ("driver core: fw_devlink: Allow marking a fwnode link as being part of a cycle")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/core.c | 97 ++++++++++++++++++++++++++++++++++++---------
1 file changed, 79 insertions(+), 18 deletions(-)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 816b0288579fd..d74a07ca36dff 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -53,11 +53,12 @@ static LIST_HEAD(deferred_sync);
static unsigned int defer_sync_state_count = 1;
static DEFINE_MUTEX(fwnode_link_lock);
static bool fw_devlink_is_permissive(void);
+static void __fw_devlink_link_to_consumers(struct device *dev);
static bool fw_devlink_drv_reg_done;
static bool fw_devlink_best_effort;
/**
- * fwnode_link_add - Create a link between two fwnode_handles.
+ * __fwnode_link_add - Create a link between two fwnode_handles.
* @con: Consumer end of the link.
* @sup: Supplier end of the link.
*
@@ -73,22 +74,18 @@ static bool fw_devlink_best_effort;
* Attempts to create duplicate links between the same pair of fwnode handles
* are ignored and there is no reference counting.
*/
-int fwnode_link_add(struct fwnode_handle *con, struct fwnode_handle *sup)
+static int __fwnode_link_add(struct fwnode_handle *con,
+ struct fwnode_handle *sup)
{
struct fwnode_link *link;
- int ret = 0;
-
- mutex_lock(&fwnode_link_lock);
list_for_each_entry(link, &sup->consumers, s_hook)
if (link->consumer == con)
- goto out;
+ return 0;
link = kzalloc(sizeof(*link), GFP_KERNEL);
- if (!link) {
- ret = -ENOMEM;
- goto out;
- }
+ if (!link)
+ return -ENOMEM;
link->supplier = sup;
INIT_LIST_HEAD(&link->s_hook);
@@ -99,9 +96,17 @@ int fwnode_link_add(struct fwnode_handle *con, struct fwnode_handle *sup)
list_add(&link->c_hook, &con->suppliers);
pr_debug("%pfwP Linked as a fwnode consumer to %pfwP\n",
con, sup);
-out:
- mutex_unlock(&fwnode_link_lock);
+ return 0;
+}
+
+int fwnode_link_add(struct fwnode_handle *con, struct fwnode_handle *sup)
+{
+ int ret;
+
+ mutex_lock(&fwnode_link_lock);
+ ret = __fwnode_link_add(con, sup);
+ mutex_unlock(&fwnode_link_lock);
return ret;
}
@@ -180,6 +185,51 @@ void fw_devlink_purge_absent_suppliers(struct fwnode_handle *fwnode)
}
EXPORT_SYMBOL_GPL(fw_devlink_purge_absent_suppliers);
+/**
+ * __fwnode_links_move_consumers - Move consumer from @from to @to fwnode_handle
+ * @from: move consumers away from this fwnode
+ * @to: move consumers to this fwnode
+ *
+ * Move all consumer links from @from fwnode to @to fwnode.
+ */
+static void __fwnode_links_move_consumers(struct fwnode_handle *from,
+ struct fwnode_handle *to)
+{
+ struct fwnode_link *link, *tmp;
+
+ list_for_each_entry_safe(link, tmp, &from->consumers, s_hook) {
+ __fwnode_link_add(link->consumer, to);
+ __fwnode_link_del(link);
+ }
+}
+
+/**
+ * __fw_devlink_pickup_dangling_consumers - Pick up dangling consumers
+ * @fwnode: fwnode from which to pick up dangling consumers
+ * @new_sup: fwnode of new supplier
+ *
+ * If the @fwnode has a corresponding struct device and the device supports
+ * probing (that is, added to a bus), then we want to let fw_devlink create
+ * MANAGED device links to this device, so leave @fwnode and its descendant's
+ * fwnode links alone.
+ *
+ * Otherwise, move its consumers to the new supplier @new_sup.
+ */
+static void __fw_devlink_pickup_dangling_consumers(struct fwnode_handle *fwnode,
+ struct fwnode_handle *new_sup)
+{
+ struct fwnode_handle *child;
+
+ if (fwnode->dev && fwnode->dev->bus)
+ return;
+
+ fwnode->flags |= FWNODE_FLAG_NOT_DEVICE;
+ __fwnode_links_move_consumers(fwnode, new_sup);
+
+ fwnode_for_each_available_child_node(fwnode, child)
+ __fw_devlink_pickup_dangling_consumers(child, new_sup);
+}
+
#ifdef CONFIG_SRCU
static DEFINE_MUTEX(device_links_lock);
DEFINE_STATIC_SRCU(device_links_srcu);
@@ -1273,16 +1323,23 @@ void device_links_driver_bound(struct device *dev)
* them. So, fw_devlink no longer needs to create device links to any
* of the device's suppliers.
*
- * Also, if a child firmware node of this bound device is not added as
- * a device by now, assume it is never going to be added and make sure
- * other devices don't defer probe indefinitely by waiting for such a
- * child device.
+ * Also, if a child firmware node of this bound device is not added as a
+ * device by now, assume it is never going to be added. Make this bound
+ * device the fallback supplier to the dangling consumers of the child
+ * firmware node because this bound device is probably implementing the
+ * child firmware node functionality and we don't want the dangling
+ * consumers to defer probe indefinitely waiting for a device for the
+ * child firmware node.
*/
if (dev->fwnode && dev->fwnode->dev == dev) {
struct fwnode_handle *child;
fwnode_links_purge_suppliers(dev->fwnode);
+ mutex_lock(&fwnode_link_lock);
fwnode_for_each_available_child_node(dev->fwnode, child)
- fw_devlink_purge_absent_suppliers(child);
+ __fw_devlink_pickup_dangling_consumers(child,
+ dev->fwnode);
+ __fw_devlink_link_to_consumers(dev);
+ mutex_unlock(&fwnode_link_lock);
}
device_remove_file(dev, &dev_attr_waiting_for_supplier);
@@ -1862,7 +1919,11 @@ static int fw_devlink_create_devlink(struct device *con,
fwnode_is_ancestor_of(sup_handle, con->fwnode))
return -EINVAL;
- sup_dev = get_dev_from_fwnode(sup_handle);
+ if (sup_handle->flags & FWNODE_FLAG_NOT_DEVICE)
+ sup_dev = fwnode_get_next_parent_dev(sup_handle);
+ else
+ sup_dev = get_dev_from_fwnode(sup_handle);
+
if (sup_dev) {
/*
* If it's one of those drivers that don't actually bind to
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 471/885] driver core: fw_devlink: Allow marking a fwnode link as being part of a cycle
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (469 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 470/885] driver core: fw_devlink: Dont purge child fwnodes consumer links Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 472/885] driver core: fw_devlink: Consolidate device link flag computation Greg Kroah-Hartman
` (416 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Saravana Kannan, Colin Foster,
Sudeep Holla, Douglas Anderson, Geert Uytterhoeven, Sasha Levin,
Luca Weiss
From: Saravana Kannan <saravanak@google.com>
[ Upstream commit 6a6dfdf8b3ff337be5a447e9f4e71969f18370ad ]
To improve detection and handling of dependency cycles, we need to be
able to mark fwnode links as being part of cycles. fwnode links marked
as being part of a cycle should not block their consumers from probing.
Fixes: 2de9d8e0d2fe ("driver core: fw_devlink: Improve handling of cyclic dependencies")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-7-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/core.c | 50 +++++++++++++++++++++++++++++++++---------
include/linux/fwnode.h | 11 +++++++++-
2 files changed, 50 insertions(+), 11 deletions(-)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index d74a07ca36dff..24c48fe3a0252 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -75,13 +75,15 @@ static bool fw_devlink_best_effort;
* are ignored and there is no reference counting.
*/
static int __fwnode_link_add(struct fwnode_handle *con,
- struct fwnode_handle *sup)
+ struct fwnode_handle *sup, u8 flags)
{
struct fwnode_link *link;
list_for_each_entry(link, &sup->consumers, s_hook)
- if (link->consumer == con)
+ if (link->consumer == con) {
+ link->flags |= flags;
return 0;
+ }
link = kzalloc(sizeof(*link), GFP_KERNEL);
if (!link)
@@ -91,6 +93,7 @@ static int __fwnode_link_add(struct fwnode_handle *con,
INIT_LIST_HEAD(&link->s_hook);
link->consumer = con;
INIT_LIST_HEAD(&link->c_hook);
+ link->flags = flags;
list_add(&link->s_hook, &sup->consumers);
list_add(&link->c_hook, &con->suppliers);
@@ -105,7 +108,7 @@ int fwnode_link_add(struct fwnode_handle *con, struct fwnode_handle *sup)
int ret;
mutex_lock(&fwnode_link_lock);
- ret = __fwnode_link_add(con, sup);
+ ret = __fwnode_link_add(con, sup, 0);
mutex_unlock(&fwnode_link_lock);
return ret;
}
@@ -125,6 +128,19 @@ static void __fwnode_link_del(struct fwnode_link *link)
kfree(link);
}
+/**
+ * __fwnode_link_cycle - Mark a fwnode link as being part of a cycle.
+ * @link: the fwnode_link to be marked
+ *
+ * The fwnode_link_lock needs to be held when this function is called.
+ */
+static void __fwnode_link_cycle(struct fwnode_link *link)
+{
+ pr_debug("%pfwf: Relaxing link with %pfwf\n",
+ link->consumer, link->supplier);
+ link->flags |= FWLINK_FLAG_CYCLE;
+}
+
/**
* fwnode_links_purge_suppliers - Delete all supplier links of fwnode_handle.
* @fwnode: fwnode whose supplier links need to be deleted
@@ -198,7 +214,7 @@ static void __fwnode_links_move_consumers(struct fwnode_handle *from,
struct fwnode_link *link, *tmp;
list_for_each_entry_safe(link, tmp, &from->consumers, s_hook) {
- __fwnode_link_add(link->consumer, to);
+ __fwnode_link_add(link->consumer, to, link->flags);
__fwnode_link_del(link);
}
}
@@ -1040,6 +1056,21 @@ static bool dev_is_best_effort(struct device *dev)
(dev->fwnode && (dev->fwnode->flags & FWNODE_FLAG_BEST_EFFORT));
}
+static struct fwnode_handle *fwnode_links_check_suppliers(
+ struct fwnode_handle *fwnode)
+{
+ struct fwnode_link *link;
+
+ if (!fwnode || fw_devlink_is_permissive())
+ return NULL;
+
+ list_for_each_entry(link, &fwnode->suppliers, c_hook)
+ if (!(link->flags & FWLINK_FLAG_CYCLE))
+ return link->supplier;
+
+ return NULL;
+}
+
/**
* device_links_check_suppliers - Check presence of supplier drivers.
* @dev: Consumer device.
@@ -1067,11 +1098,8 @@ int device_links_check_suppliers(struct device *dev)
* probe.
*/
mutex_lock(&fwnode_link_lock);
- if (dev->fwnode && !list_empty(&dev->fwnode->suppliers) &&
- !fw_devlink_is_permissive()) {
- sup_fw = list_first_entry(&dev->fwnode->suppliers,
- struct fwnode_link,
- c_hook)->supplier;
+ sup_fw = fwnode_links_check_suppliers(dev->fwnode);
+ if (sup_fw) {
if (!dev_is_best_effort(dev)) {
fwnode_ret = -EPROBE_DEFER;
dev_err_probe(dev, -EPROBE_DEFER,
@@ -1260,7 +1288,9 @@ static ssize_t waiting_for_supplier_show(struct device *dev,
bool val;
device_lock(dev);
- val = !list_empty(&dev->fwnode->suppliers);
+ mutex_lock(&fwnode_link_lock);
+ val = !!fwnode_links_check_suppliers(dev->fwnode);
+ mutex_unlock(&fwnode_link_lock);
device_unlock(dev);
return sysfs_emit(buf, "%u\n", val);
}
diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h
index 89b9bdfca925c..fdf2ee0285b7a 100644
--- a/include/linux/fwnode.h
+++ b/include/linux/fwnode.h
@@ -18,7 +18,7 @@ struct fwnode_operations;
struct device;
/*
- * fwnode link flags
+ * fwnode flags
*
* LINKS_ADDED: The fwnode has already be parsed to add fwnode links.
* NOT_DEVICE: The fwnode will never be populated as a struct device.
@@ -36,6 +36,7 @@ struct device;
#define FWNODE_FLAG_INITIALIZED BIT(2)
#define FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD BIT(3)
#define FWNODE_FLAG_BEST_EFFORT BIT(4)
+#define FWNODE_FLAG_VISITED BIT(5)
struct fwnode_handle {
struct fwnode_handle *secondary;
@@ -46,11 +47,19 @@ struct fwnode_handle {
u8 flags;
};
+/*
+ * fwnode link flags
+ *
+ * CYCLE: The fwnode link is part of a cycle. Don't defer probe.
+ */
+#define FWLINK_FLAG_CYCLE BIT(0)
+
struct fwnode_link {
struct fwnode_handle *supplier;
struct list_head s_hook;
struct fwnode_handle *consumer;
struct list_head c_hook;
+ u8 flags;
};
/**
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 472/885] driver core: fw_devlink: Consolidate device link flag computation
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (470 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 471/885] driver core: fw_devlink: Allow marking a fwnode link as being part of a cycle Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 473/885] driver core: fw_devlink: Improve check for fwnode with no device/driver Greg Kroah-Hartman
` (415 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Saravana Kannan, Colin Foster,
Sudeep Holla, Douglas Anderson, Geert Uytterhoeven, Sasha Levin,
Luca Weiss
From: Saravana Kannan <saravanak@google.com>
[ Upstream commit cd115c0409f283edde94bd5a9a42dc42bee0aba8 ]
Consolidate the code that computes the flags to be used when creating a
device link from a fwnode link.
Fixes: 2de9d8e0d2fe ("driver core: fw_devlink: Improve handling of cyclic dependencies")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-8-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/core.c | 28 +++++++++++++++-------------
include/linux/fwnode.h | 1 -
2 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 24c48fe3a0252..f623ebc131f8d 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1726,8 +1726,11 @@ static int __init fw_devlink_strict_setup(char *arg)
}
early_param("fw_devlink.strict", fw_devlink_strict_setup);
-u32 fw_devlink_get_flags(void)
+static inline u32 fw_devlink_get_flags(u8 fwlink_flags)
{
+ if (fwlink_flags & FWLINK_FLAG_CYCLE)
+ return FW_DEVLINK_FLAGS_PERMISSIVE | DL_FLAG_CYCLE;
+
return fw_devlink_flags;
}
@@ -1908,7 +1911,7 @@ static int fw_devlink_relax_cycle(struct device *con, void *sup)
* fw_devlink_create_devlink - Create a device link from a consumer to fwnode
* @con: consumer device for the device link
* @sup_handle: fwnode handle of supplier
- * @flags: devlink flags
+ * @link: fwnode link that's being converted to a device link
*
* This function will try to create a device link between the consumer device
* @con and the supplier device represented by @sup_handle.
@@ -1925,10 +1928,17 @@ static int fw_devlink_relax_cycle(struct device *con, void *sup)
* possible to do that in the future
*/
static int fw_devlink_create_devlink(struct device *con,
- struct fwnode_handle *sup_handle, u32 flags)
+ struct fwnode_handle *sup_handle,
+ struct fwnode_link *link)
{
struct device *sup_dev;
int ret = 0;
+ u32 flags;
+
+ if (con->fwnode == link->consumer)
+ flags = fw_devlink_get_flags(link->flags);
+ else
+ flags = FW_DEVLINK_FLAGS_PERMISSIVE;
/*
* In some cases, a device P might also be a supplier to its child node
@@ -2054,7 +2064,6 @@ static void __fw_devlink_link_to_consumers(struct device *dev)
struct fwnode_link *link, *tmp;
list_for_each_entry_safe(link, tmp, &fwnode->consumers, s_hook) {
- u32 dl_flags = fw_devlink_get_flags();
struct device *con_dev;
bool own_link = true;
int ret;
@@ -2084,14 +2093,13 @@ static void __fw_devlink_link_to_consumers(struct device *dev)
con_dev = NULL;
} else {
own_link = false;
- dl_flags = FW_DEVLINK_FLAGS_PERMISSIVE;
}
}
if (!con_dev)
continue;
- ret = fw_devlink_create_devlink(con_dev, fwnode, dl_flags);
+ ret = fw_devlink_create_devlink(con_dev, fwnode, link);
put_device(con_dev);
if (!own_link || ret == -EAGAIN)
continue;
@@ -2132,19 +2140,13 @@ static void __fw_devlink_link_to_suppliers(struct device *dev,
bool own_link = (dev->fwnode == fwnode);
struct fwnode_link *link, *tmp;
struct fwnode_handle *child = NULL;
- u32 dl_flags;
-
- if (own_link)
- dl_flags = fw_devlink_get_flags();
- else
- dl_flags = FW_DEVLINK_FLAGS_PERMISSIVE;
list_for_each_entry_safe(link, tmp, &fwnode->suppliers, c_hook) {
int ret;
struct device *sup_dev;
struct fwnode_handle *sup = link->supplier;
- ret = fw_devlink_create_devlink(dev, sup, dl_flags);
+ ret = fw_devlink_create_devlink(dev, sup, link);
if (!own_link || ret == -EAGAIN)
continue;
diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h
index fdf2ee0285b7a..5700451b300fb 100644
--- a/include/linux/fwnode.h
+++ b/include/linux/fwnode.h
@@ -207,7 +207,6 @@ static inline void fwnode_dev_initialized(struct fwnode_handle *fwnode,
fwnode->flags &= ~FWNODE_FLAG_INITIALIZED;
}
-extern u32 fw_devlink_get_flags(void);
extern bool fw_devlink_is_strict(void);
int fwnode_link_add(struct fwnode_handle *con, struct fwnode_handle *sup);
void fwnode_links_purge(struct fwnode_handle *fwnode);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 473/885] driver core: fw_devlink: Improve check for fwnode with no device/driver
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (471 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 472/885] driver core: fw_devlink: Consolidate device link flag computation Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 474/885] driver core: fw_devlink: Make cycle detection more robust Greg Kroah-Hartman
` (414 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Saravana Kannan, Colin Foster,
Sudeep Holla, Douglas Anderson, Geert Uytterhoeven, Sasha Levin,
Luca Weiss
From: Saravana Kannan <saravanak@google.com>
[ Upstream commit 411c0d58ca6faa9bc4b9f5382118a31c7bb92a6f ]
fw_devlink shouldn't defer the probe of a device to wait on a supplier
that'll never have a struct device or will never be probed by a driver.
We currently check if a supplier falls into this category, but don't
check its ancestors. We need to check the ancestors too because if the
ancestor will never probe, then the supplier will never probe either.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/core.c | 40 ++++++++++++++++++++++++++++++++++++++--
1 file changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index f623ebc131f8d..bf053e351a277 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1907,6 +1907,35 @@ static int fw_devlink_relax_cycle(struct device *con, void *sup)
return ret;
}
+static bool fwnode_init_without_drv(struct fwnode_handle *fwnode)
+{
+ struct device *dev;
+ bool ret;
+
+ if (!(fwnode->flags & FWNODE_FLAG_INITIALIZED))
+ return false;
+
+ dev = get_dev_from_fwnode(fwnode);
+ ret = !dev || dev->links.status == DL_DEV_NO_DRIVER;
+ put_device(dev);
+
+ return ret;
+}
+
+static bool fwnode_ancestor_init_without_drv(struct fwnode_handle *fwnode)
+{
+ struct fwnode_handle *parent;
+
+ fwnode_for_each_parent_node(fwnode, parent) {
+ if (fwnode_init_without_drv(parent)) {
+ fwnode_handle_put(parent);
+ return true;
+ }
+ }
+
+ return false;
+}
+
/**
* fw_devlink_create_devlink - Create a device link from a consumer to fwnode
* @con: consumer device for the device link
@@ -1995,9 +2024,16 @@ static int fw_devlink_create_devlink(struct device *con,
goto out;
}
- /* Supplier that's already initialized without a struct device. */
- if (sup_handle->flags & FWNODE_FLAG_INITIALIZED)
+ /*
+ * Supplier or supplier's ancestor already initialized without a struct
+ * device or being probed by a driver.
+ */
+ if (fwnode_init_without_drv(sup_handle) ||
+ fwnode_ancestor_init_without_drv(sup_handle)) {
+ dev_dbg(con, "Not linking %pfwP - Might never probe\n",
+ sup_handle);
return -EINVAL;
+ }
/*
* DL_FLAG_SYNC_STATE_ONLY doesn't block probing and supports
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 474/885] driver core: fw_devlink: Make cycle detection more robust
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (472 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 473/885] driver core: fw_devlink: Improve check for fwnode with no device/driver Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 475/885] mtd: mtdpart: Dont create platform device thatll never probe Greg Kroah-Hartman
` (413 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Saravana Kannan, Colin Foster,
Sudeep Holla, Douglas Anderson, Geert Uytterhoeven, Sasha Levin,
Luca Weiss
From: Saravana Kannan <saravanak@google.com>
[ Upstream commit 3fb16866b51ded6c016b664caad53f8d4fd9dc56 ]
fw_devlink could only detect a single and simple cycle because it relied
mainly on device link cycle detection code that only checked for cycles
between devices. The expectation was that the firmware wouldn't have
complicated cycles and multiple cycles between devices. That expectation
has been proven to be wrong.
For example, fw_devlink could handle:
+-+ +-+
|A+------> |B+
+-+ +++
^ |
| |
+----------+
But it couldn't handle even something as "simple" as:
+---------------------+
| |
v |
+-+ +-+ +++
|A+------> |B+------> |C|
+-+ +++ +-+
^ |
| |
+----------+
But firmware has even more complicated cycles like:
+---------------------+
| |
v |
+-+ +---+ +++
+--+A+------>| B +-----> |C|<--+
| +-+ ++--+ +++ |
| ^ | ^ | |
| | | | | |
| +---------+ +---------+ |
| |
+------------------------------+
And this is without including parent child dependencies or nodes in the
cycle that are just firmware nodes that'll never have a struct device
created for them.
The proper way to treat these devices it to not force any probe ordering
between them, while still enforce dependencies between node in the
cycles (A, B and C) and their consumers.
So this patch goes all out and just deals with all types of cycles. It
does this by:
1. Following dependencies across device links, parent-child and fwnode
links.
2. When it find cycles, it mark the device links and fwnode links as
such instead of just deleting them or making the indistinguishable
from proxy SYNC_STATE_ONLY device links.
This way, when new nodes get added, we can immediately find and mark any
new cycles whether the new node is a device or firmware node.
Fixes: 2de9d8e0d2fe ("driver core: fw_devlink: Improve handling of cyclic dependencies")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-9-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/core.c | 248 +++++++++++++++++++++++---------------------
1 file changed, 129 insertions(+), 119 deletions(-)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index bf053e351a277..ac08d475e2828 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1865,47 +1865,6 @@ static void fw_devlink_unblock_consumers(struct device *dev)
device_links_write_unlock();
}
-/**
- * fw_devlink_relax_cycle - Convert cyclic links to SYNC_STATE_ONLY links
- * @con: Device to check dependencies for.
- * @sup: Device to check against.
- *
- * Check if @sup depends on @con or any device dependent on it (its child or
- * its consumer etc). When such a cyclic dependency is found, convert all
- * device links created solely by fw_devlink into SYNC_STATE_ONLY device links.
- * This is the equivalent of doing fw_devlink=permissive just between the
- * devices in the cycle. We need to do this because, at this point, fw_devlink
- * can't tell which of these dependencies is not a real dependency.
- *
- * Return 1 if a cycle is found. Otherwise, return 0.
- */
-static int fw_devlink_relax_cycle(struct device *con, void *sup)
-{
- struct device_link *link;
- int ret;
-
- if (con == sup)
- return 1;
-
- ret = device_for_each_child(con, sup, fw_devlink_relax_cycle);
- if (ret)
- return ret;
-
- list_for_each_entry(link, &con->links.consumers, s_node) {
- if (!(link->flags & DL_FLAG_CYCLE) &&
- device_link_flag_is_sync_state_only(link->flags))
- continue;
-
- if (!fw_devlink_relax_cycle(link->consumer, sup))
- continue;
-
- ret = 1;
-
- fw_devlink_relax_link(link);
- link->flags |= DL_FLAG_CYCLE;
- }
- return ret;
-}
static bool fwnode_init_without_drv(struct fwnode_handle *fwnode)
{
@@ -1936,6 +1895,111 @@ static bool fwnode_ancestor_init_without_drv(struct fwnode_handle *fwnode)
return false;
}
+/**
+ * __fw_devlink_relax_cycles - Relax and mark dependency cycles.
+ * @con: Potential consumer device.
+ * @sup_handle: Potential supplier's fwnode.
+ *
+ * Needs to be called with fwnode_lock and device link lock held.
+ *
+ * Check if @sup_handle or any of its ancestors or suppliers direct/indirectly
+ * depend on @con. This function can detect multiple cyles between @sup_handle
+ * and @con. When such dependency cycles are found, convert all device links
+ * created solely by fw_devlink into SYNC_STATE_ONLY device links. Also, mark
+ * all fwnode links in the cycle with FWLINK_FLAG_CYCLE so that when they are
+ * converted into a device link in the future, they are created as
+ * SYNC_STATE_ONLY device links. This is the equivalent of doing
+ * fw_devlink=permissive just between the devices in the cycle. We need to do
+ * this because, at this point, fw_devlink can't tell which of these
+ * dependencies is not a real dependency.
+ *
+ * Return true if one or more cycles were found. Otherwise, return false.
+ */
+static bool __fw_devlink_relax_cycles(struct device *con,
+ struct fwnode_handle *sup_handle)
+{
+ struct device *sup_dev = NULL, *par_dev = NULL;
+ struct fwnode_link *link;
+ struct device_link *dev_link;
+ bool ret = false;
+
+ if (!sup_handle)
+ return false;
+
+ /*
+ * We aren't trying to find all cycles. Just a cycle between con and
+ * sup_handle.
+ */
+ if (sup_handle->flags & FWNODE_FLAG_VISITED)
+ return false;
+
+ sup_handle->flags |= FWNODE_FLAG_VISITED;
+
+ sup_dev = get_dev_from_fwnode(sup_handle);
+
+ /* Termination condition. */
+ if (sup_dev == con) {
+ ret = true;
+ goto out;
+ }
+
+ /*
+ * If sup_dev is bound to a driver and @con hasn't started binding to a
+ * driver, sup_dev can't be a consumer of @con. So, no need to check
+ * further.
+ */
+ if (sup_dev && sup_dev->links.status == DL_DEV_DRIVER_BOUND &&
+ con->links.status == DL_DEV_NO_DRIVER) {
+ ret = false;
+ goto out;
+ }
+
+ list_for_each_entry(link, &sup_handle->suppliers, c_hook) {
+ if (__fw_devlink_relax_cycles(con, link->supplier)) {
+ __fwnode_link_cycle(link);
+ ret = true;
+ }
+ }
+
+ /*
+ * Give priority to device parent over fwnode parent to account for any
+ * quirks in how fwnodes are converted to devices.
+ */
+ if (sup_dev)
+ par_dev = get_device(sup_dev->parent);
+ else
+ par_dev = fwnode_get_next_parent_dev(sup_handle);
+
+ if (par_dev && __fw_devlink_relax_cycles(con, par_dev->fwnode))
+ ret = true;
+
+ if (!sup_dev)
+ goto out;
+
+ list_for_each_entry(dev_link, &sup_dev->links.suppliers, c_node) {
+ /*
+ * Ignore a SYNC_STATE_ONLY flag only if it wasn't marked as
+ * such due to a cycle.
+ */
+ if (device_link_flag_is_sync_state_only(dev_link->flags) &&
+ !(dev_link->flags & DL_FLAG_CYCLE))
+ continue;
+
+ if (__fw_devlink_relax_cycles(con,
+ dev_link->supplier->fwnode)) {
+ fw_devlink_relax_link(dev_link);
+ dev_link->flags |= DL_FLAG_CYCLE;
+ ret = true;
+ }
+ }
+
+out:
+ sup_handle->flags &= ~FWNODE_FLAG_VISITED;
+ put_device(sup_dev);
+ put_device(par_dev);
+ return ret;
+}
+
/**
* fw_devlink_create_devlink - Create a device link from a consumer to fwnode
* @con: consumer device for the device link
@@ -1988,6 +2052,21 @@ static int fw_devlink_create_devlink(struct device *con,
fwnode_is_ancestor_of(sup_handle, con->fwnode))
return -EINVAL;
+ /*
+ * SYNC_STATE_ONLY device links don't block probing and supports cycles.
+ * So cycle detection isn't necessary and shouldn't be done.
+ */
+ if (!(flags & DL_FLAG_SYNC_STATE_ONLY)) {
+ device_links_write_lock();
+ if (__fw_devlink_relax_cycles(con, sup_handle)) {
+ __fwnode_link_cycle(link);
+ flags = fw_devlink_get_flags(link->flags);
+ dev_info(con, "Fixed dependency cycle(s) with %pfwf\n",
+ sup_handle);
+ }
+ device_links_write_unlock();
+ }
+
if (sup_handle->flags & FWNODE_FLAG_NOT_DEVICE)
sup_dev = fwnode_get_next_parent_dev(sup_handle);
else
@@ -2001,23 +2080,16 @@ static int fw_devlink_create_devlink(struct device *con,
*/
if (sup_dev->links.status == DL_DEV_NO_DRIVER &&
sup_handle->flags & FWNODE_FLAG_INITIALIZED) {
+ dev_dbg(con,
+ "Not linking %pfwf - dev might never probe\n",
+ sup_handle);
ret = -EINVAL;
goto out;
}
- /*
- * If this fails, it is due to cycles in device links. Just
- * give up on this link and treat it as invalid.
- */
- if (!device_link_add(con, sup_dev, flags) &&
- !(flags & DL_FLAG_SYNC_STATE_ONLY)) {
- dev_info(con, "Fixing up cyclic dependency with %s\n",
- dev_name(sup_dev));
- device_links_write_lock();
- fw_devlink_relax_cycle(con, sup_dev);
- device_links_write_unlock();
- device_link_add(con, sup_dev,
- FW_DEVLINK_FLAGS_PERMISSIVE);
+ if (!device_link_add(con, sup_dev, flags)) {
+ dev_err(con, "Failed to create device link with %s\n",
+ dev_name(sup_dev));
ret = -EINVAL;
}
@@ -2030,49 +2102,12 @@ static int fw_devlink_create_devlink(struct device *con,
*/
if (fwnode_init_without_drv(sup_handle) ||
fwnode_ancestor_init_without_drv(sup_handle)) {
- dev_dbg(con, "Not linking %pfwP - Might never probe\n",
+ dev_dbg(con, "Not linking %pfwf - might never become dev\n",
sup_handle);
return -EINVAL;
}
- /*
- * DL_FLAG_SYNC_STATE_ONLY doesn't block probing and supports
- * cycles. So cycle detection isn't necessary and shouldn't be
- * done.
- */
- if (flags & DL_FLAG_SYNC_STATE_ONLY)
- return -EAGAIN;
-
- /*
- * If we can't find the supplier device from its fwnode, it might be
- * due to a cyclic dependency between fwnodes. Some of these cycles can
- * be broken by applying logic. Check for these types of cycles and
- * break them so that devices in the cycle probe properly.
- *
- * If the supplier's parent is dependent on the consumer, then the
- * consumer and supplier have a cyclic dependency. Since fw_devlink
- * can't tell which of the inferred dependencies are incorrect, don't
- * enforce probe ordering between any of the devices in this cyclic
- * dependency. Do this by relaxing all the fw_devlink device links in
- * this cycle and by treating the fwnode link between the consumer and
- * the supplier as an invalid dependency.
- */
- sup_dev = fwnode_get_next_parent_dev(sup_handle);
- if (sup_dev && device_is_dependent(con, sup_dev)) {
- dev_info(con, "Fixing up cyclic dependency with %pfwP (%s)\n",
- sup_handle, dev_name(sup_dev));
- device_links_write_lock();
- fw_devlink_relax_cycle(con, sup_dev);
- device_links_write_unlock();
- ret = -EINVAL;
- } else {
- /*
- * Can't check for cycles or no cycles. So let's try
- * again later.
- */
- ret = -EAGAIN;
- }
-
+ ret = -EAGAIN;
out:
put_device(sup_dev);
return ret;
@@ -2155,10 +2190,7 @@ static void __fw_devlink_link_to_consumers(struct device *dev)
*
* The function creates normal (non-SYNC_STATE_ONLY) device links between @dev
* and the real suppliers of @dev. Once these device links are created, the
- * fwnode links are deleted. When such device links are successfully created,
- * this function is called recursively on those supplier devices. This is
- * needed to detect and break some invalid cycles in fwnode links. See
- * fw_devlink_create_devlink() for more details.
+ * fwnode links are deleted.
*
* In addition, it also looks at all the suppliers of the entire fwnode tree
* because some of the child devices of @dev that have not been added yet
@@ -2179,7 +2211,6 @@ static void __fw_devlink_link_to_suppliers(struct device *dev,
list_for_each_entry_safe(link, tmp, &fwnode->suppliers, c_hook) {
int ret;
- struct device *sup_dev;
struct fwnode_handle *sup = link->supplier;
ret = fw_devlink_create_devlink(dev, sup, link);
@@ -2187,27 +2218,6 @@ static void __fw_devlink_link_to_suppliers(struct device *dev,
continue;
__fwnode_link_del(link);
-
- /* If no device link was created, nothing more to do. */
- if (ret)
- continue;
-
- /*
- * If a device link was successfully created to a supplier, we
- * now need to try and link the supplier to all its suppliers.
- *
- * This is needed to detect and delete false dependencies in
- * fwnode links that haven't been converted to a device link
- * yet. See comments in fw_devlink_create_devlink() for more
- * details on the false dependency.
- *
- * Without deleting these false dependencies, some devices will
- * never probe because they'll keep waiting for their false
- * dependency fwnode links to be converted to device links.
- */
- sup_dev = get_dev_from_fwnode(sup);
- __fw_devlink_link_to_suppliers(sup_dev, sup_dev->fwnode);
- put_device(sup_dev);
}
/*
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 475/885] mtd: mtdpart: Dont create platform device thatll never probe
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (473 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 474/885] driver core: fw_devlink: Make cycle detection more robust Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 476/885] usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev Greg Kroah-Hartman
` (412 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Maxim Kiselev, Saravana Kannan,
Douglas Anderson, Geert Uytterhoeven, Sasha Levin, Luca Weiss
From: Saravana Kannan <saravanak@google.com>
[ Upstream commit fb42378dcc7f247df56f0ecddfdae85487495fbc ]
These "nvmem-cells" platform devices never get probed because there's no
platform driver for it and it's never used anywhere else. So it's a
waste of memory. These devices also cause fw_devlink to block nvmem
consumers of "nvmem-cells" partition from probing because the supplier
device never probes.
So stop creating platform devices for nvmem-cells partitions to avoid
wasting memory and to avoid blocking probing of consumers.
Reported-by: Maxim Kiselev <bigunclemax@gmail.com>
Fixes: bcdf0315a61a ("mtd: call of_platform_populate() for MTD partitions")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Maksim Kiselev <bigunclemax@gmail.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-13-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/mtdpart.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index d442fa94c8720..85f5ee6f06fc6 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -577,6 +577,7 @@ static int mtd_part_of_parse(struct mtd_info *master,
{
struct mtd_part_parser *parser;
struct device_node *np;
+ struct device_node *child;
struct property *prop;
struct device *dev;
const char *compat;
@@ -594,6 +595,15 @@ static int mtd_part_of_parse(struct mtd_info *master,
else
np = of_get_child_by_name(np, "partitions");
+ /*
+ * Don't create devices that are added to a bus but will never get
+ * probed. That'll cause fw_devlink to block probing of consumers of
+ * this partition until the partition device is probed.
+ */
+ for_each_child_of_node(np, child)
+ if (of_device_is_compatible(child, "nvmem-cells"))
+ of_node_set_flag(child, OF_POPULATED);
+
of_property_for_each_string(np, "compatible", prop, compat) {
parser = mtd_part_get_compatible_parser(compat);
if (!parser)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 476/885] usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (474 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 475/885] mtd: mtdpart: Dont create platform device thatll never probe Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 477/885] dmaengine: dw-edma: Fix readq_ch() return value truncation Greg Kroah-Hartman
` (411 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexander Stein, Rob Herring, Sasha Levin
From: Alexander Stein <alexander.stein@ew.tq-group.com>
[ Upstream commit e2ffae3ed92a9f768902c1cf82642c3a09cd0345 ]
This sets both of_node fields and takes a of_node reference as well.
Fixes: bb160ee61c04 ("drivers/usb/host/ehci-fsl: Fix interrupt setup in host mode.")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230207110531.1060252-4-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/fsl-mph-dr-of.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index e5df175228928..46c6a152b8655 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -112,8 +112,7 @@ static struct platform_device *fsl_usb2_device_register(
goto error;
}
- pdev->dev.of_node = ofdev->dev.of_node;
- pdev->dev.of_node_reused = true;
+ device_set_of_node_from_dev(&pdev->dev, &ofdev->dev);
retval = platform_device_add(pdev);
if (retval)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 477/885] dmaengine: dw-edma: Fix readq_ch() return value truncation
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (475 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 476/885] usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 478/885] PCI: Fix dropping valid root bus resources with .end = zero Greg Kroah-Hartman
` (410 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Serge Semin, Bjorn Helgaas, Sasha Levin
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
[ Upstream commit 5fdca4a995bcd4cf61bda40af154a730589dc524 ]
Previously, readq_ch() did a 64-bit readq(), but truncated the result by
storing it in the u32 "value". Change "value" to u64 to avoid the
truncation.
Note: the method is currently unused, so the bug hasn't caused any problem
so far.
Fixes: 04e0a39fc10f ("dmaengine: dw-edma: Add writeq() and readq() for 64 bits architectures")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/dw-edma/dw-edma-v0-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c
index 77e6cfe52e0a3..a3816ba632851 100644
--- a/drivers/dma/dw-edma/dw-edma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-edma-v0-core.c
@@ -192,7 +192,7 @@ static inline void writeq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
const void __iomem *addr)
{
- u32 value;
+ u64 value;
if (dw->chip->mf == EDMA_MF_EDMA_LEGACY) {
u32 viewport_sel;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 478/885] PCI: Fix dropping valid root bus resources with .end = zero
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (476 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 477/885] dmaengine: dw-edma: Fix readq_ch() return value truncation Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 479/885] phy: rockchip-typec: fix tcphy_get_mode error case Greg Kroah-Hartman
` (409 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Niklas Schnelle, Geert Uytterhoeven,
Bjorn Helgaas, Kai-Heng Feng, Sasha Levin
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit 9d8ba74a181b1c81def21168795ed96cbe6f05ed ]
On r8a7791/koelsch:
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xc3a34e00 (size 64):
comm "swapper/0", pid 1, jiffies 4294937460 (age 199.080s)
hex dump (first 32 bytes):
b4 5d 81 f0 b4 5d 81 f0 c0 b0 a2 c3 00 00 00 00 .]...]..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<fe3aa979>] __kmalloc+0xf0/0x140
[<34bd6bc0>] resource_list_create_entry+0x18/0x38
[<767046bc>] pci_add_resource_offset+0x20/0x68
[<b3f3edf2>] devm_of_pci_get_host_bridge_resources.constprop.0+0xb0/0x390
When coalescing two resources for a contiguous aperture, the second
resource is enlarged to cover the full contiguous range, while the first
resource is marked invalid. This invalidation is done by clearing the
flags, start, and end members.
When adding the initial resources to the bus later, invalid resources are
skipped. Unfortunately, the check for an invalid resource considers only
the end member, causing false positives.
E.g. on r8a7791/koelsch, root bus resource 0 ("bus 00") is skipped, and no
longer registered with pci_bus_insert_busn_res() (causing the memory leak),
nor printed:
pci-rcar-gen2 ee090000.pci: host bridge /soc/pci@ee090000 ranges:
pci-rcar-gen2 ee090000.pci: MEM 0x00ee080000..0x00ee08ffff -> 0x00ee080000
pci-rcar-gen2 ee090000.pci: PCI: revision 11
pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
-pci_bus 0000:00: root bus resource [bus 00]
pci_bus 0000:00: root bus resource [mem 0xee080000-0xee08ffff]
Fix this by only skipping resources where all of the flags, start, and end
members are zero.
Fixes: 7c3855c423b17f6c ("PCI: Coalesce host bridge contiguous apertures")
Link: https://lore.kernel.org/r/da0fcd5e86c74239be79c7cb03651c0fce31b515.1676036673.git.geert+renesas@glider.be
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/probe.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 1d6f7b502020d..90e676439170b 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -994,7 +994,7 @@ static int pci_register_host_bridge(struct pci_host_bridge *bridge)
resource_list_for_each_entry_safe(window, n, &resources) {
offset = window->offset;
res = window->res;
- if (!res->end)
+ if (!res->flags && !res->start && !res->end)
continue;
list_move_tail(&window->node, &bridge->windows);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 479/885] phy: rockchip-typec: fix tcphy_get_mode error case
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (477 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 478/885] PCI: Fix dropping valid root bus resources with .end = zero Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 480/885] PCI: qcom: Fix host-init error handling Greg Kroah-Hartman
` (408 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Neill Kapron, Lee Jones, Vinod Koul,
Sasha Levin
From: Neill Kapron <nkapron@google.com>
[ Upstream commit 4ca651df07183e29cdad7272255e23aec0169a1b ]
The existing logic in tcphy_get_mode() can cause the phy to be
incorrectly configured to USB UFP or DisplayPort mode when
extcon_get_state returns an error code.
extcon_get_state() can return 0, 1, or a negative error code.
It is possible to get into the failing state with an extcon driver
which does not support the extcon connector id specified as the
second argument to extcon_get_state().
tcphy_get_mode()
->extcon_get_state()
-->find_cable_index_by_id()
--->return -EINVAL;
Fixes: e96be45cb84e ("phy: Add USB Type-C PHY driver for rk3399")
Signed-off-by: Neill Kapron <nkapron@google.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230126001013.3707873-1-nkapron@google.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/rockchip/phy-rockchip-typec.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index d76440ae10ff4..6aea512e5d4ee 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -821,10 +821,10 @@ static int tcphy_get_mode(struct rockchip_typec_phy *tcphy)
mode = MODE_DFP_USB;
id = EXTCON_USB_HOST;
- if (ufp) {
+ if (ufp > 0) {
mode = MODE_UFP_USB;
id = EXTCON_USB;
- } else if (dp) {
+ } else if (dp > 0) {
mode = MODE_DFP_DP;
id = EXTCON_DISP_DP;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 480/885] PCI: qcom: Fix host-init error handling
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (478 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 479/885] phy: rockchip-typec: fix tcphy_get_mode error case Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 481/885] iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry() Greg Kroah-Hartman
` (407 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Johan Hovold, Lorenzo Pieralisi,
Bjorn Helgaas, Manivannan Sadhasivam, Sasha Levin
From: Johan Hovold <johan+linaro@kernel.org>
[ Upstream commit 997e010de9134474dbfde52be03efd7d1bce902d ]
Implement the new host_deinit() callback so that the PHY is powered off
and regulators and clocks are disabled also on late host-init errors.
Link: https://lore.kernel.org/r/20221017114705.8277-2-johan+linaro@kernel.org
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/controller/dwc/pcie-qcom.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index f711acacaeaf8..f8e512540fb85 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1527,8 +1527,19 @@ static int qcom_pcie_host_init(struct dw_pcie_rp *pp)
return ret;
}
+static void qcom_pcie_host_deinit(struct dw_pcie_rp *pp)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct qcom_pcie *pcie = to_qcom_pcie(pci);
+
+ qcom_ep_reset_assert(pcie);
+ phy_power_off(pcie->phy);
+ pcie->cfg->ops->deinit(pcie);
+}
+
static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
- .host_init = qcom_pcie_host_init,
+ .host_init = qcom_pcie_host_init,
+ .host_deinit = qcom_pcie_host_deinit,
};
/* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 481/885] iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (479 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 480/885] PCI: qcom: Fix host-init error handling Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 482/885] iommu: Fix error unwind in iommu_group_alloc() Greg Kroah-Hartman
` (406 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dan Carpenter, Leon Romanovsky, Sasha Levin
From: Dan Carpenter <error27@gmail.com>
[ Upstream commit 4ca446b127c568b59cb8d9748b6f70499624bb18 ]
This condition needs to match the previous "if (epcp->state == LISTEN) {"
exactly to avoid a NULL dereference of either "listen_ep" or "ep". The
problem is that "epcp" has been re-assigned so just testing
"if (epcp->state == LISTEN) {" a second time is not sufficient.
Fixes: 116aeb887371 ("iw_cxgb4: provide detailed provider-specific CM_ID information")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y+usKuWIKr4dimZh@kili
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/cxgb4/restrack.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/cxgb4/restrack.c b/drivers/infiniband/hw/cxgb4/restrack.c
index ff645b955a082..fd22c85d35f4f 100644
--- a/drivers/infiniband/hw/cxgb4/restrack.c
+++ b/drivers/infiniband/hw/cxgb4/restrack.c
@@ -238,7 +238,7 @@ int c4iw_fill_res_cm_id_entry(struct sk_buff *msg,
if (rdma_nl_put_driver_u64_hex(msg, "history", epcp->history))
goto err_cancel_table;
- if (epcp->state == LISTEN) {
+ if (listen_ep) {
if (rdma_nl_put_driver_u32(msg, "stid", listen_ep->stid))
goto err_cancel_table;
if (rdma_nl_put_driver_u32(msg, "backlog", listen_ep->backlog))
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 482/885] iommu: Fix error unwind in iommu_group_alloc()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (480 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 481/885] iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry() Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 483/885] iommu/amd: Do not identity map v2 capable device when snp is enabled Greg Kroah-Hartman
` (405 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jason Gunthorpe, Lu Baolu,
Joerg Roedel, Sasha Levin
From: Jason Gunthorpe <jgg@nvidia.com>
[ Upstream commit 4daa861174d56023c2068ddb03de0752f07fa199 ]
If either iommu_group_grate_file() fails then the
iommu_group is leaked.
Destroy it on these error paths.
Found by kselftest/iommu/iommufd_fail_nth
Fixes: bc7d12b91bd3 ("iommu: Implement reserved_regions iommu-group sysfs file")
Fixes: c52c72d3dee8 ("iommu: Add sysfs attribyte for domain type")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-8f616bee028d+8b-iommu_group_alloc_leak_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/iommu.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 959d895fc1dff..fd8c8aeb3c504 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -749,12 +749,16 @@ struct iommu_group *iommu_group_alloc(void)
ret = iommu_group_create_file(group,
&iommu_group_attr_reserved_regions);
- if (ret)
+ if (ret) {
+ kobject_put(group->devices_kobj);
return ERR_PTR(ret);
+ }
ret = iommu_group_create_file(group, &iommu_group_attr_type);
- if (ret)
+ if (ret) {
+ kobject_put(group->devices_kobj);
return ERR_PTR(ret);
+ }
pr_debug("Allocated group %d\n", group->id);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 483/885] iommu/amd: Do not identity map v2 capable device when snp is enabled
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (481 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 482/885] iommu: Fix error unwind in iommu_group_alloc() Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 484/885] dmaengine: sf-pdma: pdma_desc memory leak fix Greg Kroah-Hartman
` (404 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Suravee Suthikulpanit, Vasant Hegde,
Joerg Roedel, Sasha Levin
From: Vasant Hegde <vasant.hegde@amd.com>
[ Upstream commit 18792e99ea2fea27c72eb1ecca1879e5e6be304d ]
Flow:
- Booted system with SNP enabled, memory encryption off and
IOMMU DMA translation mode
- AMD driver detects v2 capable device and amd_iommu_def_domain_type()
returns identity mode
- amd_iommu_domain_alloc() returns NULL an SNP is enabled
- System will fail to register device
On SNP enabled system, passthrough mode is not supported. IOMMU default
domain is set to translation mode. We need to return zero from
amd_iommu_def_domain_type() so that it allocates translation domain.
Fixes: fb2accadaa94 ("iommu/amd: Introduce function to check and enable SNP")
CC: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230207091752.7656-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/amd/iommu.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c
index d3b39d0416fa3..46bf0744721dd 100644
--- a/drivers/iommu/amd/iommu.c
+++ b/drivers/iommu/amd/iommu.c
@@ -2394,12 +2394,17 @@ static int amd_iommu_def_domain_type(struct device *dev)
return 0;
/*
- * Do not identity map IOMMUv2 capable devices when memory encryption is
- * active, because some of those devices (AMD GPUs) don't have the
- * encryption bit in their DMA-mask and require remapping.
+ * Do not identity map IOMMUv2 capable devices when:
+ * - memory encryption is active, because some of those devices
+ * (AMD GPUs) don't have the encryption bit in their DMA-mask
+ * and require remapping.
+ * - SNP is enabled, because it prohibits DTE[Mode]=0.
*/
- if (!cc_platform_has(CC_ATTR_MEM_ENCRYPT) && dev_data->iommu_v2)
+ if (dev_data->iommu_v2 &&
+ !cc_platform_has(CC_ATTR_MEM_ENCRYPT) &&
+ !amd_iommu_snp_en) {
return IOMMU_DOMAIN_IDENTITY;
+ }
return 0;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 484/885] dmaengine: sf-pdma: pdma_desc memory leak fix
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (482 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 483/885] iommu/amd: Do not identity map v2 capable device when snp is enabled Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 485/885] dmaengine: dw-axi-dmac: Do not dereference NULL structure Greg Kroah-Hartman
` (403 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shravan Chippa, Conor Dooley,
Vinod Koul, Sasha Levin
From: Shravan Chippa <shravan.chippa@microchip.com>
[ Upstream commit b02e07015a5ac7bbc029da931ae17914b8ae0339 ]
Commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a
DMA channel") changed sf_pdma_prep_dma_memcpy() to unconditionally
allocate a new sf_pdma_desc each time it is called.
The driver previously recycled descs, by checking the in_use flag, only
allocating additional descs if the existing one was in use. This logic
was removed in commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread
support for a DMA channel"), but sf_pdma_free_desc() was not changed to
handle the new behaviour.
As a result, each time sf_pdma_prep_dma_memcpy() is called, the previous
descriptor is leaked, over time leading to memory starvation:
unreferenced object 0xffffffe008447300 (size 192):
comm "irq/39-mchp_dsc", pid 343, jiffies 4294906910 (age 981.200s)
hex dump (first 32 bytes):
00 00 00 ff 00 00 00 00 b8 c1 00 00 00 00 00 00 ................
00 00 70 08 10 00 00 00 00 00 00 c0 00 00 00 00 ..p.............
backtrace:
[<00000000064a04f4>] kmemleak_alloc+0x1e/0x28
[<00000000018927a7>] kmem_cache_alloc+0x11e/0x178
[<000000002aea8d16>] sf_pdma_prep_dma_memcpy+0x40/0x112
Add the missing kfree() to sf_pdma_free_desc(), and remove the redundant
in_use flag.
Fixes: b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel")
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230120100623.3530634-1-shravan.chippa@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/sf-pdma/sf-pdma.c | 3 +--
drivers/dma/sf-pdma/sf-pdma.h | 1 -
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
index 6b524eb6bcf3a..e578ad5569494 100644
--- a/drivers/dma/sf-pdma/sf-pdma.c
+++ b/drivers/dma/sf-pdma/sf-pdma.c
@@ -96,7 +96,6 @@ sf_pdma_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dest, dma_addr_t src,
if (!desc)
return NULL;
- desc->in_use = true;
desc->dirn = DMA_MEM_TO_MEM;
desc->async_tx = vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
@@ -290,7 +289,7 @@ static void sf_pdma_free_desc(struct virt_dma_desc *vdesc)
struct sf_pdma_desc *desc;
desc = to_sf_pdma_desc(vdesc);
- desc->in_use = false;
+ kfree(desc);
}
static void sf_pdma_donebh_tasklet(struct tasklet_struct *t)
diff --git a/drivers/dma/sf-pdma/sf-pdma.h b/drivers/dma/sf-pdma/sf-pdma.h
index dcb3687bd5da2..5c398a83b491a 100644
--- a/drivers/dma/sf-pdma/sf-pdma.h
+++ b/drivers/dma/sf-pdma/sf-pdma.h
@@ -78,7 +78,6 @@ struct sf_pdma_desc {
u64 src_addr;
struct virt_dma_desc vdesc;
struct sf_pdma_chan *chan;
- bool in_use;
enum dma_transfer_direction dirn;
struct dma_async_tx_descriptor *async_tx;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 485/885] dmaengine: dw-axi-dmac: Do not dereference NULL structure
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (483 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 484/885] dmaengine: sf-pdma: pdma_desc memory leak fix Greg Kroah-Hartman
@ 2023-03-07 16:56 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 486/885] dmaengine: ptdma: check for null desc before calling pt_cmd_callback Greg Kroah-Hartman
` (402 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:56 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eugeniy Paltsev, Vinod Koul,
dmaengine, Kees Cook, Andy Shevchenko, Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit be4d46edeee4b2459d2f53f37ada88bbfb634b6c ]
If "vdesc" is NULL, it cannot be used with vd_to_axi_desc(). Leave
"bytes" unchanged at 0. Seen under GCC 13 with -Warray-bounds:
../drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c: In function 'dma_chan_tx_status':
../drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c:329:46: warning: array subscript 0 is outside array bounds of 'struct
virt_dma_desc[46116860184273879]' [-Warray-bounds=]
329 | bytes = vd_to_axi_desc(vdesc)->length;
| ^~
Fixes: 8e55444da65c ("dmaengine: dw-axi-dmac: Support burst residue granularity")
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230127223623.never.507-kees@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index bf85aa0979ecb..152c5d98524d7 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -325,8 +325,6 @@ dma_chan_tx_status(struct dma_chan *dchan, dma_cookie_t cookie,
len = vd_to_axi_desc(vdesc)->hw_desc[0].len;
completed_length = completed_blocks * len;
bytes = length - completed_length;
- } else {
- bytes = vd_to_axi_desc(vdesc)->length;
}
spin_unlock_irqrestore(&chan->vc.lock, flags);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 486/885] dmaengine: ptdma: check for null desc before calling pt_cmd_callback
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (484 preceding siblings ...)
2023-03-07 16:56 ` [PATCH 6.1 485/885] dmaengine: dw-axi-dmac: Do not dereference NULL structure Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 487/885] iommu/vt-d: Fix error handling in sva enable/disable paths Greg Kroah-Hartman
` (401 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Eric Pilmore, Vinod Koul, Sasha Levin
From: Eric Pilmore <epilmore@gigaio.com>
[ Upstream commit 928469986171a6f763b34b039427f5667ba3fd50 ]
Resolves a panic that can occur on AMD systems, typically during host
shutdown, after the PTDMA driver had been exercised. The issue was
the pt_issue_pending() function is mistakenly assuming that there will
be at least one descriptor in the Submitted queue when the function
is called. However, it is possible that both the Submitted and Issued
queues could be empty, which could result in pt_cmd_callback() being
mistakenly called with a NULL pointer.
Ref: Bugzilla Bug 216856.
Fixes: 6fa7e0e836e2 ("dmaengine: ptdma: fix concurrency issue with multiple dma transfer")
Signed-off-by: Eric Pilmore <epilmore@gigaio.com>
Link: https://lore.kernel.org/r/20230210075142.58253-1-epilmore@gigaio.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/ptdma/ptdma-dmaengine.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/ptdma/ptdma-dmaengine.c b/drivers/dma/ptdma/ptdma-dmaengine.c
index cc22d162ce250..1aa65e5de0f3a 100644
--- a/drivers/dma/ptdma/ptdma-dmaengine.c
+++ b/drivers/dma/ptdma/ptdma-dmaengine.c
@@ -254,7 +254,7 @@ static void pt_issue_pending(struct dma_chan *dma_chan)
spin_unlock_irqrestore(&chan->vc.lock, flags);
/* If there was nothing active, start processing */
- if (engine_is_idle)
+ if (engine_is_idle && desc)
pt_cmd_callback(desc, 0);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 487/885] iommu/vt-d: Fix error handling in sva enable/disable paths
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (485 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 486/885] dmaengine: ptdma: check for null desc before calling pt_cmd_callback Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 488/885] iommu/vt-d: Allow to use flush-queue when first level is default Greg Kroah-Hartman
` (400 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kevin Tian, Lu Baolu, Joerg Roedel,
Sasha Levin
From: Lu Baolu <baolu.lu@linux.intel.com>
[ Upstream commit 60b1daa3b168fbc648ae2ad28a84759223e49e18 ]
Roll back all previous actions in error paths of intel_iommu_enable_sva()
and intel_iommu_disable_sva().
Fixes: d5b9e4bfe0d8 ("iommu/vt-d: Report prq to io-pgfault framework")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230208051559.700109-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/intel/iommu.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 644ca49e8cf80..494a872cbf9bd 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -4636,8 +4636,12 @@ static int intel_iommu_enable_sva(struct device *dev)
return -EINVAL;
ret = iopf_queue_add_device(iommu->iopf_queue, dev);
- if (!ret)
- ret = iommu_register_device_fault_handler(dev, iommu_queue_iopf, dev);
+ if (ret)
+ return ret;
+
+ ret = iommu_register_device_fault_handler(dev, iommu_queue_iopf, dev);
+ if (ret)
+ iopf_queue_remove_device(iommu->iopf_queue, dev);
return ret;
}
@@ -4649,8 +4653,12 @@ static int intel_iommu_disable_sva(struct device *dev)
int ret;
ret = iommu_unregister_device_fault_handler(dev);
- if (!ret)
- ret = iopf_queue_remove_device(iommu->iopf_queue, dev);
+ if (ret)
+ return ret;
+
+ ret = iopf_queue_remove_device(iommu->iopf_queue, dev);
+ if (ret)
+ iommu_register_device_fault_handler(dev, iommu_queue_iopf, dev);
return ret;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 488/885] iommu/vt-d: Allow to use flush-queue when first level is default
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (486 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 487/885] iommu/vt-d: Fix error handling in sva enable/disable paths Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 489/885] RDMA/rxe: cleanup some error handling in rxe_verbs.c Greg Kroah-Hartman
` (399 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sanjay Kumar, Tina Zhang,
Kevin Tian, Lu Baolu, Joerg Roedel, Sasha Levin
From: Tina Zhang <tina.zhang@intel.com>
[ Upstream commit 257ec290741924f8df678927d0dfecb1deebb9c5 ]
Commit 29b32839725f ("iommu/vt-d: Do not use flush-queue when caching-mode
is on") forced default domains to be strict mode as long as IOMMU
caching-mode is flagged. The reason for doing this is that when vIOMMU
uses VT-d caching mode to synchronize shadowing page tables, the strict
mode shows better performance.
However, this optimization is orthogonal to the first-level page table
because the Intel VT-d architecture does not define the caching mode of
the first-level page table. Refer to VT-d spec, section 6.1, "When the
CM field is reported as Set, any software updates to remapping
structures other than first-stage mapping (including updates to not-
present entries or present entries whose programming resulted in
translation faults) requires explicit invalidation of the caches."
Exclude the first-level page table from this optimization.
Generally using first-stage translation in vIOMMU implies nested
translation enabled in the physical IOMMU. In this case the first-stage
page table is wholly captured by the guest. The vIOMMU only needs to
transfer the cache invalidations on vIOMMU to the physical IOMMU.
Forcing the default domain to strict mode will cause more frequent
cache invalidations, resulting in performance degradation. In a real
performance benchmark test measured by iperf receive, the performance
result on Sapphire Rapids 100Gb NIC shows:
w/ this fix ~51 Gbits/s, w/o this fix ~39.3 Gbits/s.
Theoretically a first-stage IOMMU page table can still be shadowed
in absence of the caching mode, e.g. with host write-protecting guest
IOMMU page table to synchronize changed PTEs with the physical
IOMMU page table. In this case the shadowing overhead is decoupled
from emulating IOTLB invalidation then the overhead of the latter part
is solely decided by the frequency of IOTLB invalidations. Hence
allowing guest default dma domain to be lazy can also benefit the
overall performance by reducing the total VM-exit numbers.
Fixes: 29b32839725f ("iommu/vt-d: Do not use flush-queue when caching-mode is on")
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230214025618.2292889-1-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/intel/iommu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 494a872cbf9bd..82d18eb02266c 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -4051,7 +4051,8 @@ int __init intel_iommu_init(void)
* is likely to be much lower than the overhead of synchronizing
* the virtual and physical IOMMU page-tables.
*/
- if (cap_caching_mode(iommu->cap)) {
+ if (cap_caching_mode(iommu->cap) &&
+ !first_level_by_default(IOMMU_DOMAIN_DMA)) {
pr_info_once("IOMMU batching disallowed due to virtualization\n");
iommu_set_dma_strict();
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 489/885] RDMA/rxe: cleanup some error handling in rxe_verbs.c
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (487 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 488/885] iommu/vt-d: Allow to use flush-queue when first level is default Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 490/885] RDMA/rxe: Fix missing memory barriers in rxe_queue.h Greg Kroah-Hartman
` (398 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yunsheng Lin, Haoyue Xu,
Jason Gunthorpe, Sasha Levin
From: Yunsheng Lin <linyunsheng@huawei.com>
[ Upstream commit 692373d186205dfb1b56f35f22702412d94d9420 ]
Instead of 'goto and return', just return directly to
simplify the error handling, and avoid some unnecessary
return value check.
Link: https://lore.kernel.org/r/20221028075053.3990467-1-xuhaoyue1@hisilicon.com
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: a77a52385e9a ("RDMA/rxe: Fix missing memory barriers in rxe_queue.h")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/sw/rxe/rxe_verbs.c | 80 ++++++++-------------------
1 file changed, 23 insertions(+), 57 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c
index 88825edc7dce1..3bc0448f56deb 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.c
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
@@ -238,7 +238,6 @@ static int rxe_destroy_ah(struct ib_ah *ibah, u32 flags)
static int post_one_recv(struct rxe_rq *rq, const struct ib_recv_wr *ibwr)
{
- int err;
int i;
u32 length;
struct rxe_recv_wqe *recv_wqe;
@@ -246,15 +245,11 @@ static int post_one_recv(struct rxe_rq *rq, const struct ib_recv_wr *ibwr)
int full;
full = queue_full(rq->queue, QUEUE_TYPE_TO_DRIVER);
- if (unlikely(full)) {
- err = -ENOMEM;
- goto err1;
- }
+ if (unlikely(full))
+ return -ENOMEM;
- if (unlikely(num_sge > rq->max_sge)) {
- err = -EINVAL;
- goto err1;
- }
+ if (unlikely(num_sge > rq->max_sge))
+ return -EINVAL;
length = 0;
for (i = 0; i < num_sge; i++)
@@ -275,9 +270,6 @@ static int post_one_recv(struct rxe_rq *rq, const struct ib_recv_wr *ibwr)
queue_advance_producer(rq->queue, QUEUE_TYPE_TO_DRIVER);
return 0;
-
-err1:
- return err;
}
static int rxe_create_srq(struct ib_srq *ibsrq, struct ib_srq_init_attr *init,
@@ -343,10 +335,7 @@ static int rxe_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
if (err)
return err;
- err = rxe_srq_from_attr(rxe, srq, attr, mask, &ucmd, udata);
- if (err)
- return err;
- return 0;
+ return rxe_srq_from_attr(rxe, srq, attr, mask, &ucmd, udata);
}
static int rxe_query_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr)
@@ -453,11 +442,11 @@ static int rxe_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
err = rxe_qp_chk_attr(rxe, qp, attr, mask);
if (err)
- goto err1;
+ return err;
err = rxe_qp_from_attr(qp, attr, mask, udata);
if (err)
- goto err1;
+ return err;
if ((mask & IB_QP_AV) && (attr->ah_attr.ah_flags & IB_AH_GRH))
qp->src_port = rdma_get_udp_sport(attr->ah_attr.grh.flow_label,
@@ -465,9 +454,6 @@ static int rxe_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
qp->attr.dest_qp_num);
return 0;
-
-err1:
- return err;
}
static int rxe_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
@@ -501,24 +487,21 @@ static int validate_send_wr(struct rxe_qp *qp, const struct ib_send_wr *ibwr,
struct rxe_sq *sq = &qp->sq;
if (unlikely(num_sge > sq->max_sge))
- goto err1;
+ return -EINVAL;
if (unlikely(mask & WR_ATOMIC_MASK)) {
if (length < 8)
- goto err1;
+ return -EINVAL;
if (atomic_wr(ibwr)->remote_addr & 0x7)
- goto err1;
+ return -EINVAL;
}
if (unlikely((ibwr->send_flags & IB_SEND_INLINE) &&
(length > sq->max_inline)))
- goto err1;
+ return -EINVAL;
return 0;
-
-err1:
- return -EINVAL;
}
static void init_send_wr(struct rxe_qp *qp, struct rxe_send_wr *wr,
@@ -735,14 +718,12 @@ static int rxe_post_recv(struct ib_qp *ibqp, const struct ib_recv_wr *wr,
if (unlikely((qp_state(qp) < IB_QPS_INIT) || !qp->valid)) {
*bad_wr = wr;
- err = -EINVAL;
- goto err1;
+ return -EINVAL;
}
if (unlikely(qp->srq)) {
*bad_wr = wr;
- err = -EINVAL;
- goto err1;
+ return -EINVAL;
}
spin_lock_irqsave(&rq->producer_lock, flags);
@@ -761,7 +742,6 @@ static int rxe_post_recv(struct ib_qp *ibqp, const struct ib_recv_wr *wr,
if (qp->resp.state == QP_STATE_ERROR)
rxe_run_task(&qp->resp.task, 1);
-err1:
return err;
}
@@ -826,16 +806,9 @@ static int rxe_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata)
err = rxe_cq_chk_attr(rxe, cq, cqe, 0);
if (err)
- goto err1;
-
- err = rxe_cq_resize_queue(cq, cqe, uresp, udata);
- if (err)
- goto err1;
-
- return 0;
+ return err;
-err1:
- return err;
+ return rxe_cq_resize_queue(cq, cqe, uresp, udata);
}
static int rxe_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc)
@@ -921,26 +894,22 @@ static struct ib_mr *rxe_reg_user_mr(struct ib_pd *ibpd,
struct rxe_mr *mr;
mr = rxe_alloc(&rxe->mr_pool);
- if (!mr) {
- err = -ENOMEM;
- goto err2;
- }
-
+ if (!mr)
+ return ERR_PTR(-ENOMEM);
rxe_get(pd);
mr->ibmr.pd = ibpd;
err = rxe_mr_init_user(rxe, start, length, iova, access, mr);
if (err)
- goto err3;
+ goto err1;
rxe_finalize(mr);
return &mr->ibmr;
-err3:
+err1:
rxe_cleanup(mr);
-err2:
return ERR_PTR(err);
}
@@ -956,25 +925,22 @@ static struct ib_mr *rxe_alloc_mr(struct ib_pd *ibpd, enum ib_mr_type mr_type,
return ERR_PTR(-EINVAL);
mr = rxe_alloc(&rxe->mr_pool);
- if (!mr) {
- err = -ENOMEM;
- goto err1;
- }
+ if (!mr)
+ return ERR_PTR(-ENOMEM);
rxe_get(pd);
mr->ibmr.pd = ibpd;
err = rxe_mr_init_fast(max_num_sg, mr);
if (err)
- goto err2;
+ goto err1;
rxe_finalize(mr);
return &mr->ibmr;
-err2:
- rxe_cleanup(mr);
err1:
+ rxe_cleanup(mr);
return ERR_PTR(err);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 490/885] RDMA/rxe: Fix missing memory barriers in rxe_queue.h
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (488 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 489/885] RDMA/rxe: cleanup some error handling in rxe_verbs.c Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 491/885] IB/hfi1: Fix math bugs in hfi1_can_pin_pages() Greg Kroah-Hartman
` (397 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bob Pearson, Jason Gunthorpe, Sasha Levin
From: Bob Pearson <rpearsonhpe@gmail.com>
[ Upstream commit a77a52385e9a761f896a88a4162e69fb7ccafe3f ]
An earlier patch which introduced smp_load_acquire/smp_store_release
into rxe_queue.h incorrectly assumed that surrounding spin-locks in
rxe_verbs.c around queue updates for kernel ulps was sufficient to
protect the passing of data through the queues between the ulp and
the rxe tasklets. But this was incorrect. The typical sequence was
ulp rxe requester tasklet
------------------------ ---------------------
spin_lock_irqsave() wqe = queue_head(queue)
if (!queue_full(q)) { if (!wqe)
spin_unlock_irqrestore return;
return -ENOMEM
} <process wqe>
wqe = queue_producer_addr(q)
<fill in wqe> queue_advance_consumer(queue)
queue_advance_producer(q)
spin_unlock_irqrestore()
queue_head() calls queue_empty() which calls smp_load_acquire()
For user space apps queue_advance_producer() calls smp_store_release()
so that there is a memory barrier between the producer and the
consumer but for kernel ulps queue_advance_produce() just incremented
the producer index because the lock function is a release function.
But to work the barrier has to come between filling in the wqe and
updating the producer index. This patch adds the missing barriers.
It also changes the enum names for the ulp queue types to
QUEUE_TYPE_FROM/TO_ULP instead of QUEUE_TYPE_TO/FROM_DRIVER
which is very ambiguous. This bug is suspected as the cause of very
rare lockups in a very high scale storage application. It is a bug
in any case and should be corrected.
Fixes: 0a67c46d2e99 ("RDMA/rxe: Protect user space index loads/stores")
Link: https://lore.kernel.org/r/20230214071053.5395-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/sw/rxe/rxe_queue.h | 108 ++++++++++++++++----------
drivers/infiniband/sw/rxe/rxe_verbs.c | 20 ++---
2 files changed, 76 insertions(+), 52 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_queue.h b/drivers/infiniband/sw/rxe/rxe_queue.h
index ed44042782fa7..c711cb98b9496 100644
--- a/drivers/infiniband/sw/rxe/rxe_queue.h
+++ b/drivers/infiniband/sw/rxe/rxe_queue.h
@@ -35,19 +35,26 @@
/**
* enum queue_type - type of queue
* @QUEUE_TYPE_TO_CLIENT: Queue is written by rxe driver and
- * read by client. Used by rxe driver only.
+ * read by client which may be a user space
+ * application or a kernel ulp.
+ * Used by rxe internals only.
* @QUEUE_TYPE_FROM_CLIENT: Queue is written by client and
- * read by rxe driver. Used by rxe driver only.
- * @QUEUE_TYPE_TO_DRIVER: Queue is written by client and
- * read by rxe driver. Used by kernel client only.
- * @QUEUE_TYPE_FROM_DRIVER: Queue is written by rxe driver and
- * read by client. Used by kernel client only.
+ * read by rxe driver.
+ * Used by rxe internals only.
+ * @QUEUE_TYPE_FROM_ULP: Queue is written by kernel ulp and
+ * read by rxe driver.
+ * Used by kernel verbs APIs only on
+ * behalf of ulps.
+ * @QUEUE_TYPE_TO_ULP: Queue is written by rxe driver and
+ * read by kernel ulp.
+ * Used by kernel verbs APIs only on
+ * behalf of ulps.
*/
enum queue_type {
QUEUE_TYPE_TO_CLIENT,
QUEUE_TYPE_FROM_CLIENT,
- QUEUE_TYPE_TO_DRIVER,
- QUEUE_TYPE_FROM_DRIVER,
+ QUEUE_TYPE_FROM_ULP,
+ QUEUE_TYPE_TO_ULP,
};
struct rxe_queue_buf;
@@ -62,9 +69,9 @@ struct rxe_queue {
u32 index_mask;
enum queue_type type;
/* private copy of index for shared queues between
- * kernel space and user space. Kernel reads and writes
+ * driver and clients. Driver reads and writes
* this copy and then replicates to rxe_queue_buf
- * for read access by user space.
+ * for read access by clients.
*/
u32 index;
};
@@ -97,19 +104,21 @@ static inline u32 queue_get_producer(const struct rxe_queue *q,
switch (type) {
case QUEUE_TYPE_FROM_CLIENT:
- /* protect user index */
+ /* used by rxe, client owns the index */
prod = smp_load_acquire(&q->buf->producer_index);
break;
case QUEUE_TYPE_TO_CLIENT:
+ /* used by rxe which owns the index */
prod = q->index;
break;
- case QUEUE_TYPE_FROM_DRIVER:
- /* protect driver index */
- prod = smp_load_acquire(&q->buf->producer_index);
- break;
- case QUEUE_TYPE_TO_DRIVER:
+ case QUEUE_TYPE_FROM_ULP:
+ /* used by ulp which owns the index */
prod = q->buf->producer_index;
break;
+ case QUEUE_TYPE_TO_ULP:
+ /* used by ulp, rxe owns the index */
+ prod = smp_load_acquire(&q->buf->producer_index);
+ break;
}
return prod;
@@ -122,19 +131,21 @@ static inline u32 queue_get_consumer(const struct rxe_queue *q,
switch (type) {
case QUEUE_TYPE_FROM_CLIENT:
+ /* used by rxe which owns the index */
cons = q->index;
break;
case QUEUE_TYPE_TO_CLIENT:
- /* protect user index */
+ /* used by rxe, client owns the index */
cons = smp_load_acquire(&q->buf->consumer_index);
break;
- case QUEUE_TYPE_FROM_DRIVER:
- cons = q->buf->consumer_index;
- break;
- case QUEUE_TYPE_TO_DRIVER:
- /* protect driver index */
+ case QUEUE_TYPE_FROM_ULP:
+ /* used by ulp, rxe owns the index */
cons = smp_load_acquire(&q->buf->consumer_index);
break;
+ case QUEUE_TYPE_TO_ULP:
+ /* used by ulp which owns the index */
+ cons = q->buf->consumer_index;
+ break;
}
return cons;
@@ -172,24 +183,31 @@ static inline void queue_advance_producer(struct rxe_queue *q,
switch (type) {
case QUEUE_TYPE_FROM_CLIENT:
- pr_warn("%s: attempt to advance client index\n",
- __func__);
+ /* used by rxe, client owns the index */
+ if (WARN_ON(1))
+ pr_warn("%s: attempt to advance client index\n",
+ __func__);
break;
case QUEUE_TYPE_TO_CLIENT:
+ /* used by rxe which owns the index */
prod = q->index;
prod = (prod + 1) & q->index_mask;
q->index = prod;
- /* protect user index */
+ /* release so client can read it safely */
smp_store_release(&q->buf->producer_index, prod);
break;
- case QUEUE_TYPE_FROM_DRIVER:
- pr_warn("%s: attempt to advance driver index\n",
- __func__);
- break;
- case QUEUE_TYPE_TO_DRIVER:
+ case QUEUE_TYPE_FROM_ULP:
+ /* used by ulp which owns the index */
prod = q->buf->producer_index;
prod = (prod + 1) & q->index_mask;
- q->buf->producer_index = prod;
+ /* release so rxe can read it safely */
+ smp_store_release(&q->buf->producer_index, prod);
+ break;
+ case QUEUE_TYPE_TO_ULP:
+ /* used by ulp, rxe owns the index */
+ if (WARN_ON(1))
+ pr_warn("%s: attempt to advance driver index\n",
+ __func__);
break;
}
}
@@ -201,24 +219,30 @@ static inline void queue_advance_consumer(struct rxe_queue *q,
switch (type) {
case QUEUE_TYPE_FROM_CLIENT:
- cons = q->index;
- cons = (cons + 1) & q->index_mask;
+ /* used by rxe which owns the index */
+ cons = (q->index + 1) & q->index_mask;
q->index = cons;
- /* protect user index */
+ /* release so client can read it safely */
smp_store_release(&q->buf->consumer_index, cons);
break;
case QUEUE_TYPE_TO_CLIENT:
- pr_warn("%s: attempt to advance client index\n",
- __func__);
+ /* used by rxe, client owns the index */
+ if (WARN_ON(1))
+ pr_warn("%s: attempt to advance client index\n",
+ __func__);
+ break;
+ case QUEUE_TYPE_FROM_ULP:
+ /* used by ulp, rxe owns the index */
+ if (WARN_ON(1))
+ pr_warn("%s: attempt to advance driver index\n",
+ __func__);
break;
- case QUEUE_TYPE_FROM_DRIVER:
+ case QUEUE_TYPE_TO_ULP:
+ /* used by ulp which owns the index */
cons = q->buf->consumer_index;
cons = (cons + 1) & q->index_mask;
- q->buf->consumer_index = cons;
- break;
- case QUEUE_TYPE_TO_DRIVER:
- pr_warn("%s: attempt to advance driver index\n",
- __func__);
+ /* release so rxe can read it safely */
+ smp_store_release(&q->buf->consumer_index, cons);
break;
}
}
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c
index 3bc0448f56deb..be13bcb4cc406 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.c
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
@@ -244,7 +244,7 @@ static int post_one_recv(struct rxe_rq *rq, const struct ib_recv_wr *ibwr)
int num_sge = ibwr->num_sge;
int full;
- full = queue_full(rq->queue, QUEUE_TYPE_TO_DRIVER);
+ full = queue_full(rq->queue, QUEUE_TYPE_FROM_ULP);
if (unlikely(full))
return -ENOMEM;
@@ -255,7 +255,7 @@ static int post_one_recv(struct rxe_rq *rq, const struct ib_recv_wr *ibwr)
for (i = 0; i < num_sge; i++)
length += ibwr->sg_list[i].length;
- recv_wqe = queue_producer_addr(rq->queue, QUEUE_TYPE_TO_DRIVER);
+ recv_wqe = queue_producer_addr(rq->queue, QUEUE_TYPE_FROM_ULP);
recv_wqe->wr_id = ibwr->wr_id;
memcpy(recv_wqe->dma.sge, ibwr->sg_list,
@@ -267,7 +267,7 @@ static int post_one_recv(struct rxe_rq *rq, const struct ib_recv_wr *ibwr)
recv_wqe->dma.cur_sge = 0;
recv_wqe->dma.sge_offset = 0;
- queue_advance_producer(rq->queue, QUEUE_TYPE_TO_DRIVER);
+ queue_advance_producer(rq->queue, QUEUE_TYPE_FROM_ULP);
return 0;
}
@@ -622,17 +622,17 @@ static int post_one_send(struct rxe_qp *qp, const struct ib_send_wr *ibwr,
spin_lock_irqsave(&qp->sq.sq_lock, flags);
- full = queue_full(sq->queue, QUEUE_TYPE_TO_DRIVER);
+ full = queue_full(sq->queue, QUEUE_TYPE_FROM_ULP);
if (unlikely(full)) {
spin_unlock_irqrestore(&qp->sq.sq_lock, flags);
return -ENOMEM;
}
- send_wqe = queue_producer_addr(sq->queue, QUEUE_TYPE_TO_DRIVER);
+ send_wqe = queue_producer_addr(sq->queue, QUEUE_TYPE_FROM_ULP);
init_send_wqe(qp, ibwr, mask, length, send_wqe);
- queue_advance_producer(sq->queue, QUEUE_TYPE_TO_DRIVER);
+ queue_advance_producer(sq->queue, QUEUE_TYPE_FROM_ULP);
spin_unlock_irqrestore(&qp->sq.sq_lock, flags);
@@ -820,12 +820,12 @@ static int rxe_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc)
spin_lock_irqsave(&cq->cq_lock, flags);
for (i = 0; i < num_entries; i++) {
- cqe = queue_head(cq->queue, QUEUE_TYPE_FROM_DRIVER);
+ cqe = queue_head(cq->queue, QUEUE_TYPE_TO_ULP);
if (!cqe)
break;
memcpy(wc++, &cqe->ibwc, sizeof(*wc));
- queue_advance_consumer(cq->queue, QUEUE_TYPE_FROM_DRIVER);
+ queue_advance_consumer(cq->queue, QUEUE_TYPE_TO_ULP);
}
spin_unlock_irqrestore(&cq->cq_lock, flags);
@@ -837,7 +837,7 @@ static int rxe_peek_cq(struct ib_cq *ibcq, int wc_cnt)
struct rxe_cq *cq = to_rcq(ibcq);
int count;
- count = queue_count(cq->queue, QUEUE_TYPE_FROM_DRIVER);
+ count = queue_count(cq->queue, QUEUE_TYPE_TO_ULP);
return (count > wc_cnt) ? wc_cnt : count;
}
@@ -853,7 +853,7 @@ static int rxe_req_notify_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags flags)
if (cq->notify != IB_CQ_NEXT_COMP)
cq->notify = flags & IB_CQ_SOLICITED_MASK;
- empty = queue_empty(cq->queue, QUEUE_TYPE_FROM_DRIVER);
+ empty = queue_empty(cq->queue, QUEUE_TYPE_TO_ULP);
if ((flags & IB_CQ_REPORT_MISSED_EVENTS) && !empty)
ret = 1;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 491/885] IB/hfi1: Fix math bugs in hfi1_can_pin_pages()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (489 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 490/885] RDMA/rxe: Fix missing memory barriers in rxe_queue.h Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 492/885] IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors Greg Kroah-Hartman
` (396 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Brendan Cunningham, Patrick Kelsey,
Dennis Dalessandro, Jason Gunthorpe, Sasha Levin
From: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
[ Upstream commit a0d198f79a8d033bd46605b779859193649f1f99 ]
Fix arithmetic and logic errors in hfi1_can_pin_pages() that would allow
hfi1 to attempt pinning pages in cases where it should not because of
resource limits or lack of required capability.
Fixes: 2c97ce4f3c29 ("IB/hfi1: Add pin query function")
Link: https://lore.kernel.org/r/167656658362.2223096.10954762619837718026.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hfi1/user_pages.c | 61 ++++++++++++++++---------
1 file changed, 40 insertions(+), 21 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/user_pages.c b/drivers/infiniband/hw/hfi1/user_pages.c
index 7bce963e2ae69..36aaedc651456 100644
--- a/drivers/infiniband/hw/hfi1/user_pages.c
+++ b/drivers/infiniband/hw/hfi1/user_pages.c
@@ -29,33 +29,52 @@ MODULE_PARM_DESC(cache_size, "Send and receive side cache size limit (in MB)");
bool hfi1_can_pin_pages(struct hfi1_devdata *dd, struct mm_struct *mm,
u32 nlocked, u32 npages)
{
- unsigned long ulimit = rlimit(RLIMIT_MEMLOCK), pinned, cache_limit,
- size = (cache_size * (1UL << 20)); /* convert to bytes */
- unsigned int usr_ctxts =
- dd->num_rcv_contexts - dd->first_dyn_alloc_ctxt;
- bool can_lock = capable(CAP_IPC_LOCK);
+ unsigned long ulimit_pages;
+ unsigned long cache_limit_pages;
+ unsigned int usr_ctxts;
/*
- * Calculate per-cache size. The calculation below uses only a quarter
- * of the available per-context limit. This leaves space for other
- * pinning. Should we worry about shared ctxts?
+ * Perform RLIMIT_MEMLOCK based checks unless CAP_IPC_LOCK is present.
*/
- cache_limit = (ulimit / usr_ctxts) / 4;
-
- /* If ulimit isn't set to "unlimited" and is smaller than cache_size. */
- if (ulimit != (-1UL) && size > cache_limit)
- size = cache_limit;
-
- /* Convert to number of pages */
- size = DIV_ROUND_UP(size, PAGE_SIZE);
-
- pinned = atomic64_read(&mm->pinned_vm);
+ if (!capable(CAP_IPC_LOCK)) {
+ ulimit_pages =
+ DIV_ROUND_DOWN_ULL(rlimit(RLIMIT_MEMLOCK), PAGE_SIZE);
+
+ /*
+ * Pinning these pages would exceed this process's locked memory
+ * limit.
+ */
+ if (atomic64_read(&mm->pinned_vm) + npages > ulimit_pages)
+ return false;
+
+ /*
+ * Only allow 1/4 of the user's RLIMIT_MEMLOCK to be used for HFI
+ * caches. This fraction is then equally distributed among all
+ * existing user contexts. Note that if RLIMIT_MEMLOCK is
+ * 'unlimited' (-1), the value of this limit will be > 2^42 pages
+ * (2^64 / 2^12 / 2^8 / 2^2).
+ *
+ * The effectiveness of this check may be reduced if I/O occurs on
+ * some user contexts before all user contexts are created. This
+ * check assumes that this process is the only one using this
+ * context (e.g., the corresponding fd was not passed to another
+ * process for concurrent access) as there is no per-context,
+ * per-process tracking of pinned pages. It also assumes that each
+ * user context has only one cache to limit.
+ */
+ usr_ctxts = dd->num_rcv_contexts - dd->first_dyn_alloc_ctxt;
+ if (nlocked + npages > (ulimit_pages / usr_ctxts / 4))
+ return false;
+ }
- /* First, check the absolute limit against all pinned pages. */
- if (pinned + npages >= ulimit && !can_lock)
+ /*
+ * Pinning these pages would exceed the size limit for this cache.
+ */
+ cache_limit_pages = cache_size * (1024 * 1024) / PAGE_SIZE;
+ if (nlocked + npages > cache_limit_pages)
return false;
- return ((nlocked + npages) <= size) || can_lock;
+ return true;
}
int hfi1_acquire_user_pages(struct mm_struct *mm, unsigned long vaddr, size_t npages,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 492/885] IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (490 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 491/885] IB/hfi1: Fix math bugs in hfi1_can_pin_pages() Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 493/885] Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use" Greg Kroah-Hartman
` (395 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Brendan Cunningham, Patrick Kelsey,
Dennis Dalessandro, Jason Gunthorpe, Sasha Levin
From: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
[ Upstream commit fd8958efe8779d3db19c9124fce593ce681ac709 ]
Fix three sources of error involving struct sdma_txreq.num_descs.
When _extend_sdma_tx_descs() extends the descriptor array, it uses the
value of tx->num_descs to determine how many existing entries from the
tx's original, internal descriptor array to copy to the newly allocated
one. As this value was incremented before the call, the copy loop will
access one entry past the internal descriptor array, copying its contents
into the corresponding slot in the new array.
If the call to _extend_sdma_tx_descs() fails, _pad_smda_tx_descs() then
invokes __sdma_tx_clean() which uses the value of tx->num_desc to drive a
loop that unmaps all descriptor entries in use. As this value was
incremented before the call, the unmap loop will invoke sdma_unmap_desc()
on a descriptor entry whose contents consist of whatever random data was
copied into it during (1), leading to cascading further calls into the
kernel and driver using arbitrary data.
_sdma_close_tx() was using tx->num_descs instead of tx->num_descs - 1.
Fix all of the above by:
- Only increment .num_descs after .descp is extended.
- Use .num_descs - 1 instead of .num_descs for last .descp entry.
Fixes: f4d26d81ad7f ("staging/rdma/hfi1: Add coalescing support for SDMA TX descriptors")
Link: https://lore.kernel.org/r/167656658879.2223096.10026561343022570690.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hfi1/sdma.c | 4 ++--
drivers/infiniband/hw/hfi1/sdma.h | 15 +++++++--------
2 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/sdma.c b/drivers/infiniband/hw/hfi1/sdma.c
index a95b654f52540..8ed20392e9f0d 100644
--- a/drivers/infiniband/hw/hfi1/sdma.c
+++ b/drivers/infiniband/hw/hfi1/sdma.c
@@ -3160,8 +3160,7 @@ int _pad_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx)
{
int rval = 0;
- tx->num_desc++;
- if ((unlikely(tx->num_desc == tx->desc_limit))) {
+ if ((unlikely(tx->num_desc + 1 == tx->desc_limit))) {
rval = _extend_sdma_tx_descs(dd, tx);
if (rval) {
__sdma_txclean(dd, tx);
@@ -3174,6 +3173,7 @@ int _pad_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx)
SDMA_MAP_NONE,
dd->sdma_pad_phys,
sizeof(u32) - (tx->packet_len & (sizeof(u32) - 1)));
+ tx->num_desc++;
_sdma_close_tx(dd, tx);
return rval;
}
diff --git a/drivers/infiniband/hw/hfi1/sdma.h b/drivers/infiniband/hw/hfi1/sdma.h
index d8170fcbfbdd5..b023fc461bd51 100644
--- a/drivers/infiniband/hw/hfi1/sdma.h
+++ b/drivers/infiniband/hw/hfi1/sdma.h
@@ -631,14 +631,13 @@ static inline void sdma_txclean(struct hfi1_devdata *dd, struct sdma_txreq *tx)
static inline void _sdma_close_tx(struct hfi1_devdata *dd,
struct sdma_txreq *tx)
{
- tx->descp[tx->num_desc].qw[0] |=
- SDMA_DESC0_LAST_DESC_FLAG;
- tx->descp[tx->num_desc].qw[1] |=
- dd->default_desc1;
+ u16 last_desc = tx->num_desc - 1;
+
+ tx->descp[last_desc].qw[0] |= SDMA_DESC0_LAST_DESC_FLAG;
+ tx->descp[last_desc].qw[1] |= dd->default_desc1;
if (tx->flags & SDMA_TXREQ_F_URGENT)
- tx->descp[tx->num_desc].qw[1] |=
- (SDMA_DESC1_HEAD_TO_HOST_FLAG |
- SDMA_DESC1_INT_REQ_FLAG);
+ tx->descp[last_desc].qw[1] |= (SDMA_DESC1_HEAD_TO_HOST_FLAG |
+ SDMA_DESC1_INT_REQ_FLAG);
}
static inline int _sdma_txadd_daddr(
@@ -655,6 +654,7 @@ static inline int _sdma_txadd_daddr(
type,
addr, len);
WARN_ON(len > tx->tlen);
+ tx->num_desc++;
tx->tlen -= len;
/* special cases for last */
if (!tx->tlen) {
@@ -666,7 +666,6 @@ static inline int _sdma_txadd_daddr(
_sdma_close_tx(dd, tx);
}
}
- tx->num_desc++;
return rval;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 493/885] Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (491 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 492/885] IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 494/885] remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers Greg Kroah-Hartman
` (394 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Manivannan Sadhasivam,
Christoph Hellwig, Sibi Sankar, Bjorn Andersson, Sasha Levin
From: Christoph Hellwig <hch@lst.de>
[ Upstream commit a899d542b687c9b04ccbd9eefabc829ba5fef791 ]
This reverts commit fc156629b23a21181e473e60341e3a78af25a1d4.
This commit manages to do three API violations at once:
- dereference the return value of dma_alloc_attrs with the
DMA_ATTR_NO_KERNEL_MAPPING mapping, which is clearly forbidden and
will do the wrong thing on various dma mapping implementations. The
fact that dma-direct uses a struct page as a cookie is an undocumented
implementation detail
- include dma-map-ops.h and use pgprot_dmacoherent despite a clear
comment documenting that this is not acceptable
- use of the VM_DMA_COHERENT for something that is not the dma-mapping
code
- use of VM_FLUSH_RESET_PERMS for vmap, while it is only supported for
vmalloc
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-6-quic_sibis@quicinc.com
Stable-dep-of: 57f72170a2b2 ("remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/remoteproc/qcom_q6v5_mss.c | 38 +++++-------------------------
1 file changed, 6 insertions(+), 32 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index fddb63cffee07..a8b141db4de63 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -10,7 +10,6 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/devcoredump.h>
-#include <linux/dma-map-ops.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
@@ -933,52 +932,27 @@ static void q6v5proc_halt_axi_port(struct q6v5 *qproc,
static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
const char *fw_name)
{
- unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS | DMA_ATTR_NO_KERNEL_MAPPING;
- unsigned long flags = VM_DMA_COHERENT | VM_FLUSH_RESET_PERMS;
- struct page **pages;
- struct page *page;
+ unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
dma_addr_t phys;
void *metadata;
int mdata_perm;
int xferop_ret;
size_t size;
- void *vaddr;
- int count;
+ void *ptr;
int ret;
- int i;
metadata = qcom_mdt_read_metadata(fw, &size, fw_name, qproc->dev);
if (IS_ERR(metadata))
return PTR_ERR(metadata);
- page = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
- if (!page) {
+ ptr = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
+ if (!ptr) {
kfree(metadata);
dev_err(qproc->dev, "failed to allocate mdt buffer\n");
return -ENOMEM;
}
- count = PAGE_ALIGN(size) >> PAGE_SHIFT;
- pages = kmalloc_array(count, sizeof(struct page *), GFP_KERNEL);
- if (!pages) {
- ret = -ENOMEM;
- goto free_dma_attrs;
- }
-
- for (i = 0; i < count; i++)
- pages[i] = nth_page(page, i);
-
- vaddr = vmap(pages, count, flags, pgprot_dmacoherent(PAGE_KERNEL));
- kfree(pages);
- if (!vaddr) {
- dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", &phys, size);
- ret = -EBUSY;
- goto free_dma_attrs;
- }
-
- memcpy(vaddr, metadata, size);
-
- vunmap(vaddr);
+ memcpy(ptr, metadata, size);
/* Hypervisor mapping to access metadata by modem */
mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
@@ -1008,7 +982,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
"mdt buffer not reclaimed system may become unstable\n");
free_dma_attrs:
- dma_free_attrs(qproc->dev, size, page, phys, dma_attrs);
+ dma_free_attrs(qproc->dev, size, ptr, phys, dma_attrs);
kfree(metadata);
return ret < 0 ? ret : 0;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 494/885] remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (492 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 493/885] Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use" Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 495/885] media: ti: cal: fix possible memory leak in cal_ctx_create() Greg Kroah-Hartman
` (393 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sibi Sankar, Manivannan Sadhasivam,
Bjorn Andersson, Sasha Levin, Amit Pundir
From: Sibi Sankar <quic_sibis@quicinc.com>
[ Upstream commit 57f72170a2b2a362c35bb9407fc844eac5afdec1 ]
Any access to the dynamically allocated metadata region by the application
processor after assigning it to the remote Q6 will result in a XPU
violation. Fix this by replacing the dynamically allocated memory region
with a no-map carveout and unmap the modem metadata memory region before
passing control to the remote Q6.
Reported-and-tested-by: Amit Pundir <amit.pundir@linaro.org>
Fixes: 6c5a9dc2481b ("remoteproc: qcom: Make secure world call for mem ownership switch")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-7-quic_sibis@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/remoteproc/qcom_q6v5_mss.c | 59 +++++++++++++++++++++++++++---
1 file changed, 53 insertions(+), 6 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index a8b141db4de63..7dbab5fcbe1e7 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -210,6 +211,9 @@ struct q6v5 {
size_t mba_size;
size_t dp_size;
+ phys_addr_t mdata_phys;
+ size_t mdata_size;
+
phys_addr_t mpss_phys;
phys_addr_t mpss_reloc;
size_t mpss_size;
@@ -945,15 +949,35 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
if (IS_ERR(metadata))
return PTR_ERR(metadata);
- ptr = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
- if (!ptr) {
- kfree(metadata);
- dev_err(qproc->dev, "failed to allocate mdt buffer\n");
- return -ENOMEM;
+ if (qproc->mdata_phys) {
+ if (size > qproc->mdata_size) {
+ ret = -EINVAL;
+ dev_err(qproc->dev, "metadata size outside memory range\n");
+ goto free_metadata;
+ }
+
+ phys = qproc->mdata_phys;
+ ptr = memremap(qproc->mdata_phys, size, MEMREMAP_WC);
+ if (!ptr) {
+ ret = -EBUSY;
+ dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n",
+ &qproc->mdata_phys, size);
+ goto free_metadata;
+ }
+ } else {
+ ptr = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
+ if (!ptr) {
+ ret = -ENOMEM;
+ dev_err(qproc->dev, "failed to allocate mdt buffer\n");
+ goto free_metadata;
+ }
}
memcpy(ptr, metadata, size);
+ if (qproc->mdata_phys)
+ memunmap(ptr);
+
/* Hypervisor mapping to access metadata by modem */
mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, true,
@@ -982,7 +1006,9 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
"mdt buffer not reclaimed system may become unstable\n");
free_dma_attrs:
- dma_free_attrs(qproc->dev, size, ptr, phys, dma_attrs);
+ if (!qproc->mdata_phys)
+ dma_free_attrs(qproc->dev, size, ptr, phys, dma_attrs);
+free_metadata:
kfree(metadata);
return ret < 0 ? ret : 0;
@@ -1810,6 +1836,7 @@ static int q6v5_init_reset(struct q6v5 *qproc)
static int q6v5_alloc_memory_region(struct q6v5 *qproc)
{
struct device_node *child;
+ struct reserved_mem *rmem;
struct device_node *node;
struct resource r;
int ret;
@@ -1856,6 +1883,26 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
qproc->mpss_phys = qproc->mpss_reloc = r.start;
qproc->mpss_size = resource_size(&r);
+ if (!child) {
+ node = of_parse_phandle(qproc->dev->of_node, "memory-region", 2);
+ } else {
+ child = of_get_child_by_name(qproc->dev->of_node, "metadata");
+ node = of_parse_phandle(child, "memory-region", 0);
+ of_node_put(child);
+ }
+
+ if (!node)
+ return 0;
+
+ rmem = of_reserved_mem_lookup(node);
+ if (!rmem) {
+ dev_err(qproc->dev, "unable to resolve metadata region\n");
+ return -EINVAL;
+ }
+
+ qproc->mdata_phys = rmem->base;
+ qproc->mdata_size = rmem->size;
+
return 0;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 495/885] media: ti: cal: fix possible memory leak in cal_ctx_create()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (493 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 494/885] remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 496/885] media: platform: ti: Add missing check for devm_regulator_get Greg Kroah-Hartman
` (392 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gaosheng Cui, Laurent Pinchart,
Mauro Carvalho Chehab, Sasha Levin
From: Gaosheng Cui <cuigaosheng1@huawei.com>
[ Upstream commit 7acd650a0484d92985a0d6d867d980c6dd019885 ]
The memory of ctx is allocated in cal_ctx_create(), but it will
not be freed when cal_ctx_v4l2_init() fails, so add kfree() when
cal_ctx_v4l2_init() fails to fix it.
Fixes: d68a94e98a89 ("media: ti-vpe: cal: Split video device initialization and registration")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/ti/cal/cal.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/ti/cal/cal.c b/drivers/media/platform/ti/cal/cal.c
index 56b61c0583cf8..1236215ec70eb 100644
--- a/drivers/media/platform/ti/cal/cal.c
+++ b/drivers/media/platform/ti/cal/cal.c
@@ -1050,8 +1050,10 @@ static struct cal_ctx *cal_ctx_create(struct cal_dev *cal, int inst)
ctx->cport = inst;
ret = cal_ctx_v4l2_init(ctx);
- if (ret)
+ if (ret) {
+ kfree(ctx);
return NULL;
+ }
return ctx;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 496/885] media: platform: ti: Add missing check for devm_regulator_get
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (494 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 495/885] media: ti: cal: fix possible memory leak in cal_ctx_create() Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 497/885] media: imx: imx7-media-csi: fix missing clk_disable_unprepare() in imx7_csi_init() Greg Kroah-Hartman
` (391 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Laurent Pinchart,
Mauro Carvalho Chehab, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit da8e05f84a11c3cc3b0ba0a3c62d20e358002d99 ]
Add check for the return value of devm_regulator_get since it may return
error pointer.
Fixes: 448de7e7850b ("[media] omap3isp: OMAP3 ISP core")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/ti/omap3isp/isp.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/media/platform/ti/omap3isp/isp.c b/drivers/media/platform/ti/omap3isp/isp.c
index 24d2383400b0a..11ae479ee89c8 100644
--- a/drivers/media/platform/ti/omap3isp/isp.c
+++ b/drivers/media/platform/ti/omap3isp/isp.c
@@ -2308,7 +2308,16 @@ static int isp_probe(struct platform_device *pdev)
/* Regulators */
isp->isp_csiphy1.vdd = devm_regulator_get(&pdev->dev, "vdd-csiphy1");
+ if (IS_ERR(isp->isp_csiphy1.vdd)) {
+ ret = PTR_ERR(isp->isp_csiphy1.vdd);
+ goto error;
+ }
+
isp->isp_csiphy2.vdd = devm_regulator_get(&pdev->dev, "vdd-csiphy2");
+ if (IS_ERR(isp->isp_csiphy2.vdd)) {
+ ret = PTR_ERR(isp->isp_csiphy2.vdd);
+ goto error;
+ }
/* Clocks
*
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 497/885] media: imx: imx7-media-csi: fix missing clk_disable_unprepare() in imx7_csi_init()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (495 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 496/885] media: platform: ti: Add missing check for devm_regulator_get Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 498/885] powerpc: Remove linker flag from KBUILD_AFLAGS Greg Kroah-Hartman
` (390 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Yingliang, Rui Miguel Silva,
Laurent Pinchart, Mauro Carvalho Chehab, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit cea606d9e996a77eed57fc60709e0728341450e3 ]
Add missing clk_disable_unprepare(), if imx7_csi_dma_setup() fails
in imx7_csi_init().
Fixes: ff43ca911978 ("media: imx: imx7-media-csi: Move CSI configuration before source start")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/media/imx/imx7-media-csi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/media/imx/imx7-media-csi.c b/drivers/staging/media/imx/imx7-media-csi.c
index c77401f184d74..5f6376c3269ab 100644
--- a/drivers/staging/media/imx/imx7-media-csi.c
+++ b/drivers/staging/media/imx/imx7-media-csi.c
@@ -638,8 +638,10 @@ static int imx7_csi_init(struct imx7_csi *csi)
imx7_csi_configure(csi);
ret = imx7_csi_dma_setup(csi);
- if (ret < 0)
+ if (ret < 0) {
+ clk_disable_unprepare(csi->mclk);
return ret;
+ }
return 0;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 498/885] powerpc: Remove linker flag from KBUILD_AFLAGS
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (496 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 497/885] media: imx: imx7-media-csi: fix missing clk_disable_unprepare() in imx7_csi_init() Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 499/885] s390/vdso: Drop -shared from KBUILD_CFLAGS_64 Greg Kroah-Hartman
` (389 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nathan Chancellor, Nick Desaulniers,
Linux Kernel Functional Testing, Anders Roxell, Michael Ellerman,
Masahiro Yamada, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 31f48f16264bc70962fb3e7ec62da64d0a2ba04a ]
When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
points out that KBUILD_AFLAGS contains a linker flag, which will be
unused:
clang: error: -Wl,-a32: 'linker' input unused [-Werror,-Wunused-command-line-argument]
This was likely supposed to be '-Wa,-a$(BITS)'. However, this change is
unnecessary, as all supported versions of clang and gcc will pass '-a64'
or '-a32' to GNU as based on the value of '-m'; the behavior of the
latest stable release of the oldest supported major version of each
compiler is shown below and each compiler's latest release exhibits the
same behavior (GCC 12.2.0 and Clang 15.0.6).
$ powerpc64-linux-gcc --version | head -1
powerpc64-linux-gcc (GCC) 5.5.0
$ powerpc64-linux-gcc -m64 -### -x assembler-with-cpp -c -o /dev/null /dev/null &| grep 'as '
.../as -a64 -mppc64 -many -mbig -o /dev/null /tmp/cctwuBzZ.s
$ powerpc64-linux-gcc -m32 -### -x assembler-with-cpp -c -o /dev/null /dev/null &| grep 'as '
.../as -a32 -mppc -many -mbig -o /dev/null /tmp/ccaZP4mF.sg
$ clang --version | head -1
Ubuntu clang version 11.1.0-++20211011094159+1fdec59bffc1-1~exp1~20211011214622.5
$ clang --target=powerpc64-linux-gnu -fno-integrated-as -m64 -### \
-x assembler-with-cpp -c -o /dev/null /dev/null &| grep gnu-as
"/usr/bin/powerpc64-linux-gnu-as" "-a64" "-mppc64" "-many" "-o" "/dev/null" "/tmp/null-80267c.s"
$ clang --target=powerpc64-linux-gnu -fno-integrated-as -m64 -### \
-x assembler-with-cpp -c -o /dev/null /dev/null &| grep gnu-as
"/usr/bin/powerpc64-linux-gnu-as" "-a32" "-mppc" "-many" "-o" "/dev/null" "/tmp/null-ab8f8d.s"
Remove this flag altogether to avoid future issues.
Fixes: 1421dc6d4829 ("powerpc/kbuild: Use flags variables rather than overriding LD/CC/AS")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index dc4cbf0a5ca95..4fd630efe39d3 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -90,7 +90,7 @@ aflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -mlittle-endian
ifeq ($(HAS_BIARCH),y)
KBUILD_CFLAGS += -m$(BITS)
-KBUILD_AFLAGS += -m$(BITS) -Wl,-a$(BITS)
+KBUILD_AFLAGS += -m$(BITS)
KBUILD_LDFLAGS += -m elf$(BITS)$(LDEMULATION)
endif
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 499/885] s390/vdso: Drop -shared from KBUILD_CFLAGS_64
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (497 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 498/885] powerpc: Remove linker flag from KBUILD_AFLAGS Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 500/885] builddeb: clean generated package content Greg Kroah-Hartman
` (388 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nathan Chancellor, Heiko Carstens,
Sven Schnelle, Linux Kernel Functional Testing, Anders Roxell,
Masahiro Yamada, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit fd8589dce8107e2ce62e92f76089654462dd67b4 ]
When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
points out that there is a linking phase flag added to CFLAGS, which
will only be used for compiling
clang-16: error: argument unused during compilation: '-shared' [-Werror,-Wunused-command-line-argument]
'-shared' is already present in ldflags-y so it can just be dropped.
Fixes: 2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/kernel/vdso64/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
index 9e2b95a222a98..1605ba45ac4c0 100644
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -25,7 +25,7 @@ KBUILD_AFLAGS_64 := $(filter-out -m64,$(KBUILD_AFLAGS))
KBUILD_AFLAGS_64 += -m64 -s
KBUILD_CFLAGS_64 := $(filter-out -m64,$(KBUILD_CFLAGS))
-KBUILD_CFLAGS_64 += -m64 -fPIC -shared -fno-common -fno-builtin
+KBUILD_CFLAGS_64 += -m64 -fPIC -fno-common -fno-builtin
ldflags-y := -fPIC -shared -soname=linux-vdso64.so.1 \
--hash-style=both --build-id=sha1 -T
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 500/885] builddeb: clean generated package content
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (498 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 499/885] s390/vdso: Drop -shared from KBUILD_CFLAGS_64 Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 501/885] media: max9286: Fix memleak in max9286_v4l2_register() Greg Kroah-Hartman
` (387 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bastian Germann, Masahiro Yamada,
Sasha Levin
From: Bastian Germann <bage@linutronix.de>
[ Upstream commit c9f9cf2560e40b62015c6c4a04be60f55ce5240e ]
For each binary Debian package, a directory with the package name is
created in the debian directory. Correct the generated file matches in the
package's clean target, which were renamed without adjusting the target.
Fixes: 1694e94e4f46 ("builddeb: match temporary directory name to the package name")
Signed-off-by: Bastian Germann <bage@linutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
scripts/package/mkdebian | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian
index a3ac5a716e9fc..5be7e627e7513 100755
--- a/scripts/package/mkdebian
+++ b/scripts/package/mkdebian
@@ -236,7 +236,7 @@ binary-arch: build-arch
KBUILD_BUILD_VERSION=${revision} -f \$(srctree)/Makefile intdeb-pkg
clean:
- rm -rf debian/*tmp debian/files
+ rm -rf debian/files debian/linux-*
\$(MAKE) clean
binary: binary-arch
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 501/885] media: max9286: Fix memleak in max9286_v4l2_register()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (499 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 500/885] builddeb: clean generated package content Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 502/885] media: ov2740: Fix memleak in ov2740_init_controls() Greg Kroah-Hartman
` (386 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Laurent Pinchart,
Sakari Ailus, Mauro Carvalho Chehab, Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit 8636c5fc7658c7c6299fb8b352d24ea4b9ba99e2 ]
There is a kmemleak when testing the media/i2c/max9286.c with bpf mock
device:
kmemleak: 5 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
unreferenced object 0xffff88810defc400 (size 256):
comm "python3", pid 278, jiffies 4294737563 (age 31.978s)
hex dump (first 32 bytes):
28 06 a7 0a 81 88 ff ff 00 fe 22 12 81 88 ff ff (.........".....
10 c4 ef 0d 81 88 ff ff 10 c4 ef 0d 81 88 ff ff ................
backtrace:
[<00000000191de6a7>] __kmalloc_node+0x44/0x1b0
[<000000002f4912b7>] kvmalloc_node+0x34/0x180
[<0000000057dc4cae>] v4l2_ctrl_new+0x325/0x10f0 [videodev]
[<0000000026030272>] v4l2_ctrl_new_std+0x16f/0x210 [videodev]
[<00000000f0d9ea2f>] max9286_probe+0x76e/0xbff [max9286]
[<00000000ea8f6455>] i2c_device_probe+0x28d/0x680
[<0000000087529af3>] really_probe+0x17c/0x3f0
[<00000000b08be526>] __driver_probe_device+0xe3/0x170
[<000000004382edea>] driver_probe_device+0x49/0x120
[<000000007bde528a>] __device_attach_driver+0xf7/0x150
[<000000009f9c6ab4>] bus_for_each_drv+0x114/0x180
[<00000000c8aaf588>] __device_attach+0x1e5/0x2d0
[<0000000041cc06b9>] bus_probe_device+0x126/0x140
[<000000002309860d>] device_add+0x810/0x1130
[<000000002827bf98>] i2c_new_client_device+0x359/0x4f0
[<00000000593bdc85>] of_i2c_register_device+0xf1/0x110
max9286_v4l2_register() calls v4l2_ctrl_new_std(), but won't free the
created v412_ctrl when fwnode_graph_get_endpoint_by_id() failed, which
causes the memleak. Call v4l2_ctrl_handler_free() to free the v412_ctrl.
Fixes: 66d8c9d2422d ("media: i2c: Add MAX9286 driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/max9286.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
index 9c083cf142319..d034a67042e35 100644
--- a/drivers/media/i2c/max9286.c
+++ b/drivers/media/i2c/max9286.c
@@ -932,6 +932,7 @@ static int max9286_v4l2_register(struct max9286_priv *priv)
err_put_node:
fwnode_handle_put(ep);
err_async:
+ v4l2_ctrl_handler_free(&priv->ctrls);
max9286_v4l2_notifier_unregister(priv);
return ret;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 502/885] media: ov2740: Fix memleak in ov2740_init_controls()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (500 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 501/885] media: max9286: Fix memleak in max9286_v4l2_register() Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 503/885] media: ov5675: Fix memleak in ov5675_init_controls() Greg Kroah-Hartman
` (385 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Sakari Ailus,
Mauro Carvalho Chehab, Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit 2d899592ed7829d0d5140853bac4d58742a6b8af ]
There is a kmemleak when testing the media/i2c/ov2740.c with bpf mock
device:
unreferenced object 0xffff8881090e19e0 (size 16):
comm "51-i2c-ov2740", pid 278, jiffies 4294781584 (age 23.613s)
hex dump (first 16 bytes):
00 f3 7c 0b 81 88 ff ff 80 75 6a 09 81 88 ff ff ..|......uj.....
backtrace:
[<000000004e9fad8f>] __kmalloc_node+0x44/0x1b0
[<0000000039c802f4>] kvmalloc_node+0x34/0x180
[<000000009b8b5c63>] v4l2_ctrl_handler_init_class+0x11d/0x180
[videodev]
[<0000000038644056>] ov2740_probe+0x37d/0x84f [ov2740]
[<0000000092489f59>] i2c_device_probe+0x28d/0x680
[<000000001038babe>] really_probe+0x17c/0x3f0
[<0000000098c7af1c>] __driver_probe_device+0xe3/0x170
[<00000000e1b3dc24>] device_driver_attach+0x34/0x80
[<000000005a04a34d>] bind_store+0x10b/0x1a0
[<00000000ce25d4f2>] drv_attr_store+0x49/0x70
[<000000007d9f4e9a>] sysfs_kf_write+0x8c/0xb0
[<00000000be6cff0f>] kernfs_fop_write_iter+0x216/0x2e0
[<0000000031ddb40a>] vfs_write+0x658/0x810
[<0000000041beecdd>] ksys_write+0xd6/0x1b0
[<0000000023755840>] do_syscall_64+0x38/0x90
[<00000000b2cc2da2>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
ov2740_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak.
Fixes: 866edc895171 ("media: i2c: Add ov2740 image sensor driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/ov2740.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
index 5d74ad4792146..628ab86698c08 100644
--- a/drivers/media/i2c/ov2740.c
+++ b/drivers/media/i2c/ov2740.c
@@ -630,8 +630,10 @@ static int ov2740_init_controls(struct ov2740 *ov2740)
V4L2_CID_TEST_PATTERN,
ARRAY_SIZE(ov2740_test_pattern_menu) - 1,
0, 0, ov2740_test_pattern_menu);
- if (ctrl_hdlr->error)
+ if (ctrl_hdlr->error) {
+ v4l2_ctrl_handler_free(ctrl_hdlr);
return ctrl_hdlr->error;
+ }
ov2740->sd.ctrl_handler = ctrl_hdlr;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 503/885] media: ov5675: Fix memleak in ov5675_init_controls()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (501 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 502/885] media: ov2740: Fix memleak in ov2740_init_controls() Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 504/885] media: ov5640: Fix soft reset sequence and timings Greg Kroah-Hartman
` (384 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shang XiaoJing, Sakari Ailus,
Mauro Carvalho Chehab, Sasha Levin
From: Shang XiaoJing <shangxiaojing@huawei.com>
[ Upstream commit dd74ed6c213003533e3abf4c204374ef01d86978 ]
There is a kmemleak when testing the media/i2c/ov5675.c with bpf mock
device:
AssertionError: unreferenced object 0xffff888107362160 (size 16):
comm "python3", pid 277, jiffies 4294832798 (age 20.722s)
hex dump (first 16 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000abe7d67c>] __kmalloc_node+0x44/0x1b0
[<000000008a725aac>] kvmalloc_node+0x34/0x180
[<000000009a53cd11>] v4l2_ctrl_handler_init_class+0x11d/0x180
[videodev]
[<0000000055b46db0>] ov5675_probe+0x38b/0x897 [ov5675]
[<00000000153d886c>] i2c_device_probe+0x28d/0x680
[<000000004afb7e8f>] really_probe+0x17c/0x3f0
[<00000000ff2f18e4>] __driver_probe_device+0xe3/0x170
[<000000000a001029>] driver_probe_device+0x49/0x120
[<00000000e39743c7>] __device_attach_driver+0xf7/0x150
[<00000000d32fd070>] bus_for_each_drv+0x114/0x180
[<000000009083ac41>] __device_attach+0x1e5/0x2d0
[<0000000015b4a830>] bus_probe_device+0x126/0x140
[<000000007813deaf>] device_add+0x810/0x1130
[<000000007becb867>] i2c_new_client_device+0x386/0x540
[<000000007f9cf4b4>] of_i2c_register_device+0xf1/0x110
[<00000000ebfdd032>] of_i2c_notify+0xfc/0x1f0
ov5675_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak.
Fixes: bf27502b1f3b ("media: ov5675: Add support for OV5675 sensor")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/ov5675.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ov5675.c b/drivers/media/i2c/ov5675.c
index 94dc8cb7a7c00..a6e6b367d1283 100644
--- a/drivers/media/i2c/ov5675.c
+++ b/drivers/media/i2c/ov5675.c
@@ -820,8 +820,10 @@ static int ov5675_init_controls(struct ov5675 *ov5675)
v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops,
V4L2_CID_VFLIP, 0, 1, 1, 0);
- if (ctrl_hdlr->error)
+ if (ctrl_hdlr->error) {
+ v4l2_ctrl_handler_free(ctrl_hdlr);
return ctrl_hdlr->error;
+ }
ov5675->sd.ctrl_handler = ctrl_hdlr;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 504/885] media: ov5640: Fix soft reset sequence and timings
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (502 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 503/885] media: ov5675: Fix memleak in ov5675_init_controls() Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 505/885] media: ov5640: Handle delays when no reset_gpio set Greg Kroah-Hartman
` (383 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nishanth Menon, Jacopo Mondi,
Jai Luthra, Jacopo Mondi, Sakari Ailus, Mauro Carvalho Chehab,
Sasha Levin
From: Jai Luthra <j-luthra@ti.com>
[ Upstream commit decea0a98b7ac04536c7d659f74783e8d67a06c0 ]
Move the register-based reset out of the init_setting[] and into the
powerup_sequence function. The sensor is power cycled and reset using
the gpio pins so the soft reset is not always necessary.
This also ensures that soft reset honors the timing sequence
from the datasheet [1].
[1] https://cdn.sparkfun.com/datasheets/Sensors/LightImaging/OV5640_datasheet.pdf
Fixes: 19a81c1426c1 ("[media] add Omnivision OV5640 sensor driver")
Reported-by: Nishanth Menon <nm@ti.com>
Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonaboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/ov5640.c | 34 ++++++++++++++++++++++++----------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 3f6d715efa823..f31b096e018f2 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -50,6 +50,7 @@
#define OV5640_REG_SYS_CTRL0 0x3008
#define OV5640_REG_SYS_CTRL0_SW_PWDN 0x42
#define OV5640_REG_SYS_CTRL0_SW_PWUP 0x02
+#define OV5640_REG_SYS_CTRL0_SW_RST 0x82
#define OV5640_REG_CHIP_ID 0x300a
#define OV5640_REG_IO_MIPI_CTRL00 0x300e
#define OV5640_REG_PAD_OUTPUT_ENABLE01 0x3017
@@ -532,7 +533,7 @@ static const struct v4l2_mbus_framefmt ov5640_default_fmt = {
};
static const struct reg_value ov5640_init_setting[] = {
- {0x3103, 0x11, 0, 0}, {0x3008, 0x82, 0, 5}, {0x3008, 0x42, 0, 0},
+ {0x3103, 0x11, 0, 0},
{0x3103, 0x03, 0, 0}, {0x3630, 0x36, 0, 0},
{0x3631, 0x0e, 0, 0}, {0x3632, 0xe2, 0, 0}, {0x3633, 0x12, 0, 0},
{0x3621, 0xe0, 0, 0}, {0x3704, 0xa0, 0, 0}, {0x3703, 0x5a, 0, 0},
@@ -2429,19 +2430,32 @@ static void ov5640_reset(struct ov5640_dev *sensor)
if (!sensor->reset_gpio)
return;
- gpiod_set_value_cansleep(sensor->reset_gpio, 0);
+ if (sensor->pwdn_gpio) {
+ gpiod_set_value_cansleep(sensor->reset_gpio, 0);
- /* camera power cycle */
- ov5640_power(sensor, false);
- usleep_range(5000, 10000);
- ov5640_power(sensor, true);
- usleep_range(5000, 10000);
+ /* camera power cycle */
+ ov5640_power(sensor, false);
+ usleep_range(5000, 10000);
+ ov5640_power(sensor, true);
+ usleep_range(5000, 10000);
- gpiod_set_value_cansleep(sensor->reset_gpio, 1);
- usleep_range(1000, 2000);
+ gpiod_set_value_cansleep(sensor->reset_gpio, 1);
+ usleep_range(1000, 2000);
- gpiod_set_value_cansleep(sensor->reset_gpio, 0);
+ gpiod_set_value_cansleep(sensor->reset_gpio, 0);
+ } else {
+ /* software reset */
+ ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0,
+ OV5640_REG_SYS_CTRL0_SW_RST);
+ }
usleep_range(20000, 25000);
+
+ /*
+ * software standby: allows registers programming;
+ * exit at restore_mode() for CSI, s_stream(1) for DVP
+ */
+ ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0,
+ OV5640_REG_SYS_CTRL0_SW_PWDN);
}
static int ov5640_set_power_on(struct ov5640_dev *sensor)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 505/885] media: ov5640: Handle delays when no reset_gpio set
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (503 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 504/885] media: ov5640: Fix soft reset sequence and timings Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 506/885] media: mc: Get media_device directly from pad Greg Kroah-Hartman
` (382 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nishanth Menon, Jai Luthra,
Jacopo Mondi, Sakari Ailus, Mauro Carvalho Chehab, Sasha Levin
From: Jai Luthra <j-luthra@ti.com>
[ Upstream commit d7ff69139908842adf824be4f50c7e9ac5886c04 ]
Some module manufacturers [1][2] don't expose the RESETB and PWDN pins
of the sensor directly through the 15-pin FFC connector. Instead wiring
~PWDN gpio to the sensor pins with appropriate delays.
In such cases, reset_gpio will not be available to the driver, but it
will still be toggled when the sensor is powered on, and thus we should
still honor the wait time of >= 5ms + 1ms + 20ms (see figure 2-3 in [3])
before attempting any i/o operations over SCCB.
Also, rename the function to ov5640_powerup_sequence to better match the
datasheet (section 2.7).
[1] https://digilent.com/reference/_media/reference/add-ons/pcam-5c/pcam_5c_sch.pdf
[2] https://www.alinx.com/public/upload/file/AN5641_User_Manual.pdf
[3] https://cdn.sparkfun.com/datasheets/Sensors/LightImaging/OV5640_datasheet.pdf
Fixes: 19a81c1426c1 ("[media] add Omnivision OV5640 sensor driver")
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/ov5640.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index f31b096e018f2..873087e180561 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -2425,11 +2425,22 @@ static void ov5640_power(struct ov5640_dev *sensor, bool enable)
gpiod_set_value_cansleep(sensor->pwdn_gpio, enable ? 0 : 1);
}
-static void ov5640_reset(struct ov5640_dev *sensor)
+/*
+ * From section 2.7 power up sequence:
+ * t0 + t1 + t2 >= 5ms Delay from DOVDD stable to PWDN pull down
+ * t3 >= 1ms Delay from PWDN pull down to RESETB pull up
+ * t4 >= 20ms Delay from RESETB pull up to SCCB (i2c) stable
+ *
+ * Some modules don't expose RESETB/PWDN pins directly, instead providing a
+ * "PWUP" GPIO which is wired through appropriate delays and inverters to the
+ * pins.
+ *
+ * In such cases, this gpio should be mapped to pwdn_gpio in the driver, and we
+ * should still toggle the pwdn_gpio below with the appropriate delays, while
+ * the calls to reset_gpio will be ignored.
+ */
+static void ov5640_powerup_sequence(struct ov5640_dev *sensor)
{
- if (!sensor->reset_gpio)
- return;
-
if (sensor->pwdn_gpio) {
gpiod_set_value_cansleep(sensor->reset_gpio, 0);
@@ -2478,8 +2489,7 @@ static int ov5640_set_power_on(struct ov5640_dev *sensor)
goto xclk_off;
}
- ov5640_reset(sensor);
- ov5640_power(sensor, true);
+ ov5640_powerup_sequence(sensor);
ret = ov5640_init_slave_id(sensor);
if (ret)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 506/885] media: mc: Get media_device directly from pad
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (504 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 505/885] media: ov5640: Handle delays when no reset_gpio set Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 507/885] media: i2c: ov772x: Fix memleak in ov772x_probe() Greg Kroah-Hartman
` (381 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Laurent Pinchart, Tomi Valkeinen,
Sakari Ailus, Mauro Carvalho Chehab, Sasha Levin
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[ Upstream commit a967a3a788028f541e4db54beabcebc3648997db ]
Various functions access the media_device from a pad by going through
the entity the pad belongs to. Remove the level of indirection and get
the media_device from the pad directly.
Fixes: 9e3576a1ae2b ("media: mc: convert pipeline funcs to take media_pad")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/mc/mc-entity.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/mc/mc-entity.c b/drivers/media/mc/mc-entity.c
index b8bcbc734eaf4..f268cf66053e1 100644
--- a/drivers/media/mc/mc-entity.c
+++ b/drivers/media/mc/mc-entity.c
@@ -703,7 +703,7 @@ static int media_pipeline_populate(struct media_pipeline *pipe,
__must_check int __media_pipeline_start(struct media_pad *pad,
struct media_pipeline *pipe)
{
- struct media_device *mdev = pad->entity->graph_obj.mdev;
+ struct media_device *mdev = pad->graph_obj.mdev;
struct media_pipeline_pad *err_ppad;
struct media_pipeline_pad *ppad;
int ret;
@@ -851,7 +851,7 @@ EXPORT_SYMBOL_GPL(__media_pipeline_start);
__must_check int media_pipeline_start(struct media_pad *pad,
struct media_pipeline *pipe)
{
- struct media_device *mdev = pad->entity->graph_obj.mdev;
+ struct media_device *mdev = pad->graph_obj.mdev;
int ret;
mutex_lock(&mdev->graph_mutex);
@@ -888,7 +888,7 @@ EXPORT_SYMBOL_GPL(__media_pipeline_stop);
void media_pipeline_stop(struct media_pad *pad)
{
- struct media_device *mdev = pad->entity->graph_obj.mdev;
+ struct media_device *mdev = pad->graph_obj.mdev;
mutex_lock(&mdev->graph_mutex);
__media_pipeline_stop(pad);
@@ -898,7 +898,7 @@ EXPORT_SYMBOL_GPL(media_pipeline_stop);
__must_check int media_pipeline_alloc_start(struct media_pad *pad)
{
- struct media_device *mdev = pad->entity->graph_obj.mdev;
+ struct media_device *mdev = pad->graph_obj.mdev;
struct media_pipeline *new_pipe = NULL;
struct media_pipeline *pipe;
int ret;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 507/885] media: i2c: ov772x: Fix memleak in ov772x_probe()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (505 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 506/885] media: mc: Get media_device directly from pad Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 508/885] media: i2c: imx219: Split common registers from mode tables Greg Kroah-Hartman
` (380 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuan Can, Laurent Pinchart,
Sakari Ailus, Mauro Carvalho Chehab, Sasha Levin
From: Yuan Can <yuancan@huawei.com>
[ Upstream commit 7485edb2b6ca5960205c0a49bedfd09bba30e521 ]
A memory leak was reported when testing ov772x with bpf mock device:
AssertionError: unreferenced object 0xffff888109afa7a8 (size 8):
comm "python3", pid 279, jiffies 4294805921 (age 20.681s)
hex dump (first 8 bytes):
80 22 88 15 81 88 ff ff ."......
backtrace:
[<000000009990b438>] __kmalloc_node+0x44/0x1b0
[<000000009e32f7d7>] kvmalloc_node+0x34/0x180
[<00000000faf48134>] v4l2_ctrl_handler_init_class+0x11d/0x180 [videodev]
[<00000000da376937>] ov772x_probe+0x1c3/0x68c [ov772x]
[<000000003f0d225e>] i2c_device_probe+0x28d/0x680
[<00000000e0b6db89>] really_probe+0x17c/0x3f0
[<000000001b19fcee>] __driver_probe_device+0xe3/0x170
[<0000000048370519>] driver_probe_device+0x49/0x120
[<000000005ead07a0>] __device_attach_driver+0xf7/0x150
[<0000000043f452b8>] bus_for_each_drv+0x114/0x180
[<00000000358e5596>] __device_attach+0x1e5/0x2d0
[<0000000043f83c5d>] bus_probe_device+0x126/0x140
[<00000000ee0f3046>] device_add+0x810/0x1130
[<00000000e0278184>] i2c_new_client_device+0x359/0x4f0
[<0000000070baf34f>] of_i2c_register_device+0xf1/0x110
[<00000000a9f2159d>] of_i2c_notify+0x100/0x160
unreferenced object 0xffff888119825c00 (size 256):
comm "python3", pid 279, jiffies 4294805921 (age 20.681s)
hex dump (first 32 bytes):
00 b4 a5 17 81 88 ff ff 00 5e 82 19 81 88 ff ff .........^......
10 5c 82 19 81 88 ff ff 10 5c 82 19 81 88 ff ff .\.......\......
backtrace:
[<000000009990b438>] __kmalloc_node+0x44/0x1b0
[<000000009e32f7d7>] kvmalloc_node+0x34/0x180
[<0000000073d88e0b>] v4l2_ctrl_new.cold+0x19b/0x86f [videodev]
[<00000000b1f576fb>] v4l2_ctrl_new_std+0x16f/0x210 [videodev]
[<00000000caf7ac99>] ov772x_probe+0x1fa/0x68c [ov772x]
[<000000003f0d225e>] i2c_device_probe+0x28d/0x680
[<00000000e0b6db89>] really_probe+0x17c/0x3f0
[<000000001b19fcee>] __driver_probe_device+0xe3/0x170
[<0000000048370519>] driver_probe_device+0x49/0x120
[<000000005ead07a0>] __device_attach_driver+0xf7/0x150
[<0000000043f452b8>] bus_for_each_drv+0x114/0x180
[<00000000358e5596>] __device_attach+0x1e5/0x2d0
[<0000000043f83c5d>] bus_probe_device+0x126/0x140
[<00000000ee0f3046>] device_add+0x810/0x1130
[<00000000e0278184>] i2c_new_client_device+0x359/0x4f0
[<0000000070baf34f>] of_i2c_register_device+0xf1/0x110
The reason is that if priv->hdl.error is set, ov772x_probe() jumps to the
error_mutex_destroy without doing v4l2_ctrl_handler_free(), and all
resources allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std()
are leaked.
Fixes: 1112babde214 ("media: i2c: Copy ov772x soc_camera sensor driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/ov772x.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 4189e3fc3d535..a238e63425f8c 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -1462,7 +1462,7 @@ static int ov772x_probe(struct i2c_client *client)
priv->subdev.ctrl_handler = &priv->hdl;
if (priv->hdl.error) {
ret = priv->hdl.error;
- goto error_mutex_destroy;
+ goto error_ctrl_free;
}
priv->clk = clk_get(&client->dev, NULL);
@@ -1515,7 +1515,6 @@ static int ov772x_probe(struct i2c_client *client)
clk_put(priv->clk);
error_ctrl_free:
v4l2_ctrl_handler_free(&priv->hdl);
-error_mutex_destroy:
mutex_destroy(&priv->lock);
return ret;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 508/885] media: i2c: imx219: Split common registers from mode tables
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (506 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 507/885] media: i2c: ov772x: Fix memleak in ov772x_probe() Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 509/885] media: i2c: imx219: Fix binning for RAW8 capture Greg Kroah-Hartman
` (379 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Adam Ford, Dave Stevenson,
Sakari Ailus, Mauro Carvalho Chehab, Sasha Levin
From: Adam Ford <aford173@gmail.com>
[ Upstream commit 8508455961d5a9e8907bcfd8dcd58f19d9b6ce47 ]
There are four modes, and each mode has a table of registers.
Some of the registers are common to all modes, so create new
tables for these common registers to reduce duplicate code.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: ef86447e775f ("media: i2c: imx219: Fix binning for RAW8 capture")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/imx219.c | 206 +++++++++++--------------------------
1 file changed, 59 insertions(+), 147 deletions(-)
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 77bd79a5954ed..7f44d62047b67 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -145,23 +145,61 @@ struct imx219_mode {
struct imx219_reg_list reg_list;
};
-/*
- * Register sets lifted off the i2C interface from the Raspberry Pi firmware
- * driver.
- * 3280x2464 = mode 2, 1920x1080 = mode 1, 1640x1232 = mode 4, 640x480 = mode 7.
- */
-static const struct imx219_reg mode_3280x2464_regs[] = {
- {0x0100, 0x00},
+static const struct imx219_reg imx219_common_regs[] = {
+ {0x0100, 0x00}, /* Mode Select */
+
+ /* To Access Addresses 3000-5fff, send the following commands */
{0x30eb, 0x0c},
{0x30eb, 0x05},
{0x300a, 0xff},
{0x300b, 0xff},
{0x30eb, 0x05},
{0x30eb, 0x09},
- {0x0114, 0x01},
- {0x0128, 0x00},
- {0x012a, 0x18},
+
+ /* PLL Clock Table */
+ {0x0301, 0x05}, /* VTPXCK_DIV */
+ {0x0303, 0x01}, /* VTSYSCK_DIV */
+ {0x0304, 0x03}, /* PREPLLCK_VT_DIV 0x03 = AUTO set */
+ {0x0305, 0x03}, /* PREPLLCK_OP_DIV 0x03 = AUTO set */
+ {0x0306, 0x00}, /* PLL_VT_MPY */
+ {0x0307, 0x39},
+ {0x030b, 0x01}, /* OP_SYS_CLK_DIV */
+ {0x030c, 0x00}, /* PLL_OP_MPY */
+ {0x030d, 0x72},
+
+ /* Undocumented registers */
+ {0x455e, 0x00},
+ {0x471e, 0x4b},
+ {0x4767, 0x0f},
+ {0x4750, 0x14},
+ {0x4540, 0x00},
+ {0x47b4, 0x14},
+ {0x4713, 0x30},
+ {0x478b, 0x10},
+ {0x478f, 0x10},
+ {0x4793, 0x10},
+ {0x4797, 0x0e},
+ {0x479b, 0x0e},
+
+ /* Frame Bank Register Group "A" */
+ {0x0162, 0x0d}, /* Line_Length_A */
+ {0x0163, 0x78},
+ {0x0170, 0x01}, /* X_ODD_INC_A */
+ {0x0171, 0x01}, /* Y_ODD_INC_A */
+
+ /* Output setup registers */
+ {0x0114, 0x01}, /* CSI 2-Lane Mode */
+ {0x0128, 0x00}, /* DPHY Auto Mode */
+ {0x012a, 0x18}, /* EXCK_Freq */
{0x012b, 0x00},
+};
+
+/*
+ * Register sets lifted off the i2C interface from the Raspberry Pi firmware
+ * driver.
+ * 3280x2464 = mode 2, 1920x1080 = mode 1, 1640x1232 = mode 4, 640x480 = mode 7.
+ */
+static const struct imx219_reg mode_3280x2464_regs[] = {
{0x0164, 0x00},
{0x0165, 0x00},
{0x0166, 0x0c},
@@ -174,53 +212,15 @@ static const struct imx219_reg mode_3280x2464_regs[] = {
{0x016d, 0xd0},
{0x016e, 0x09},
{0x016f, 0xa0},
- {0x0170, 0x01},
- {0x0171, 0x01},
- {0x0174, 0x00},
+ {0x0174, 0x00}, /* No-Binning */
{0x0175, 0x00},
- {0x0301, 0x05},
- {0x0303, 0x01},
- {0x0304, 0x03},
- {0x0305, 0x03},
- {0x0306, 0x00},
- {0x0307, 0x39},
- {0x030b, 0x01},
- {0x030c, 0x00},
- {0x030d, 0x72},
{0x0624, 0x0c},
{0x0625, 0xd0},
{0x0626, 0x09},
{0x0627, 0xa0},
- {0x455e, 0x00},
- {0x471e, 0x4b},
- {0x4767, 0x0f},
- {0x4750, 0x14},
- {0x4540, 0x00},
- {0x47b4, 0x14},
- {0x4713, 0x30},
- {0x478b, 0x10},
- {0x478f, 0x10},
- {0x4793, 0x10},
- {0x4797, 0x0e},
- {0x479b, 0x0e},
- {0x0162, 0x0d},
- {0x0163, 0x78},
};
static const struct imx219_reg mode_1920_1080_regs[] = {
- {0x0100, 0x00},
- {0x30eb, 0x05},
- {0x30eb, 0x0c},
- {0x300a, 0xff},
- {0x300b, 0xff},
- {0x30eb, 0x05},
- {0x30eb, 0x09},
- {0x0114, 0x01},
- {0x0128, 0x00},
- {0x012a, 0x18},
- {0x012b, 0x00},
- {0x0162, 0x0d},
- {0x0163, 0x78},
{0x0164, 0x02},
{0x0165, 0xa8},
{0x0166, 0x0a},
@@ -233,49 +233,15 @@ static const struct imx219_reg mode_1920_1080_regs[] = {
{0x016d, 0x80},
{0x016e, 0x04},
{0x016f, 0x38},
- {0x0170, 0x01},
- {0x0171, 0x01},
- {0x0174, 0x00},
+ {0x0174, 0x00}, /* No-Binning */
{0x0175, 0x00},
- {0x0301, 0x05},
- {0x0303, 0x01},
- {0x0304, 0x03},
- {0x0305, 0x03},
- {0x0306, 0x00},
- {0x0307, 0x39},
- {0x030b, 0x01},
- {0x030c, 0x00},
- {0x030d, 0x72},
{0x0624, 0x07},
{0x0625, 0x80},
{0x0626, 0x04},
{0x0627, 0x38},
- {0x455e, 0x00},
- {0x471e, 0x4b},
- {0x4767, 0x0f},
- {0x4750, 0x14},
- {0x4540, 0x00},
- {0x47b4, 0x14},
- {0x4713, 0x30},
- {0x478b, 0x10},
- {0x478f, 0x10},
- {0x4793, 0x10},
- {0x4797, 0x0e},
- {0x479b, 0x0e},
};
static const struct imx219_reg mode_1640_1232_regs[] = {
- {0x0100, 0x00},
- {0x30eb, 0x0c},
- {0x30eb, 0x05},
- {0x300a, 0xff},
- {0x300b, 0xff},
- {0x30eb, 0x05},
- {0x30eb, 0x09},
- {0x0114, 0x01},
- {0x0128, 0x00},
- {0x012a, 0x18},
- {0x012b, 0x00},
{0x0164, 0x00},
{0x0165, 0x00},
{0x0166, 0x0c},
@@ -288,53 +254,15 @@ static const struct imx219_reg mode_1640_1232_regs[] = {
{0x016d, 0x68},
{0x016e, 0x04},
{0x016f, 0xd0},
- {0x0170, 0x01},
- {0x0171, 0x01},
- {0x0174, 0x01},
+ {0x0174, 0x01}, /* x2-Binning */
{0x0175, 0x01},
- {0x0301, 0x05},
- {0x0303, 0x01},
- {0x0304, 0x03},
- {0x0305, 0x03},
- {0x0306, 0x00},
- {0x0307, 0x39},
- {0x030b, 0x01},
- {0x030c, 0x00},
- {0x030d, 0x72},
{0x0624, 0x06},
{0x0625, 0x68},
{0x0626, 0x04},
{0x0627, 0xd0},
- {0x455e, 0x00},
- {0x471e, 0x4b},
- {0x4767, 0x0f},
- {0x4750, 0x14},
- {0x4540, 0x00},
- {0x47b4, 0x14},
- {0x4713, 0x30},
- {0x478b, 0x10},
- {0x478f, 0x10},
- {0x4793, 0x10},
- {0x4797, 0x0e},
- {0x479b, 0x0e},
- {0x0162, 0x0d},
- {0x0163, 0x78},
};
static const struct imx219_reg mode_640_480_regs[] = {
- {0x0100, 0x00},
- {0x30eb, 0x05},
- {0x30eb, 0x0c},
- {0x300a, 0xff},
- {0x300b, 0xff},
- {0x30eb, 0x05},
- {0x30eb, 0x09},
- {0x0114, 0x01},
- {0x0128, 0x00},
- {0x012a, 0x18},
- {0x012b, 0x00},
- {0x0162, 0x0d},
- {0x0163, 0x78},
{0x0164, 0x03},
{0x0165, 0xe8},
{0x0166, 0x08},
@@ -347,35 +275,12 @@ static const struct imx219_reg mode_640_480_regs[] = {
{0x016d, 0x80},
{0x016e, 0x01},
{0x016f, 0xe0},
- {0x0170, 0x01},
- {0x0171, 0x01},
- {0x0174, 0x03},
+ {0x0174, 0x03}, /* x2-analog binning */
{0x0175, 0x03},
- {0x0301, 0x05},
- {0x0303, 0x01},
- {0x0304, 0x03},
- {0x0305, 0x03},
- {0x0306, 0x00},
- {0x0307, 0x39},
- {0x030b, 0x01},
- {0x030c, 0x00},
- {0x030d, 0x72},
{0x0624, 0x06},
{0x0625, 0x68},
{0x0626, 0x04},
{0x0627, 0xd0},
- {0x455e, 0x00},
- {0x471e, 0x4b},
- {0x4767, 0x0f},
- {0x4750, 0x14},
- {0x4540, 0x00},
- {0x47b4, 0x14},
- {0x4713, 0x30},
- {0x478b, 0x10},
- {0x478f, 0x10},
- {0x4793, 0x10},
- {0x4797, 0x0e},
- {0x479b, 0x0e},
};
static const struct imx219_reg raw8_framefmt_regs[] = {
@@ -1041,6 +946,13 @@ static int imx219_start_streaming(struct imx219 *imx219)
if (ret < 0)
return ret;
+ /* Send all registers that are common to all modes */
+ ret = imx219_write_regs(imx219, imx219_common_regs, ARRAY_SIZE(imx219_common_regs));
+ if (ret) {
+ dev_err(&client->dev, "%s failed to send mfg header\n", __func__);
+ goto err_rpm_put;
+ }
+
/* Apply default values of current mode */
reg_list = &imx219->mode->reg_list;
ret = imx219_write_regs(imx219, reg_list->regs, reg_list->num_of_regs);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 509/885] media: i2c: imx219: Fix binning for RAW8 capture
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (507 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 508/885] media: i2c: imx219: Split common registers from mode tables Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 510/885] media: platform: mtk-mdp3: Fix return value check in mdp_probe() Greg Kroah-Hartman
` (378 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jai Luthra, Dave Stevenson,
Sakari Ailus, Mauro Carvalho Chehab, Sasha Levin
From: Jai Luthra <j-luthra@ti.com>
[ Upstream commit ef86447e775fb1f2ced00d4c7fff2c0a1c63f165 ]
2x2 binning works fine for RAW10 capture, but for RAW8 1232p mode it
leads to corrupted frames [1][2].
Using the special 2x2 analog binning mode fixes the issue, but causes
artefacts for RAW10 1232p capture. So here we choose the binning mode
depending upon the frame format selected.
As both binning modes work fine for 480p RAW8 and RAW10 capture, it can
share the same code path as 1232p for selecting binning mode.
[1] https://forums.raspberrypi.com/viewtopic.php?t=332103
[2] https://github.com/raspberrypi/libcamera-apps/issues/281
Fixes: 22da1d56e982 ("media: i2c: imx219: Add support for RAW8 bit bayer format")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/imx219.c | 57 ++++++++++++++++++++++++++++++++------
1 file changed, 49 insertions(+), 8 deletions(-)
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 7f44d62047b67..7a14688f8c228 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -89,6 +89,12 @@
#define IMX219_REG_ORIENTATION 0x0172
+/* Binning Mode */
+#define IMX219_REG_BINNING_MODE 0x0174
+#define IMX219_BINNING_NONE 0x0000
+#define IMX219_BINNING_2X2 0x0101
+#define IMX219_BINNING_2X2_ANALOG 0x0303
+
/* Test Pattern Control */
#define IMX219_REG_TEST_PATTERN 0x0600
#define IMX219_TEST_PATTERN_DISABLE 0
@@ -143,6 +149,9 @@ struct imx219_mode {
/* Default register values */
struct imx219_reg_list reg_list;
+
+ /* 2x2 binning is used */
+ bool binning;
};
static const struct imx219_reg imx219_common_regs[] = {
@@ -212,8 +221,6 @@ static const struct imx219_reg mode_3280x2464_regs[] = {
{0x016d, 0xd0},
{0x016e, 0x09},
{0x016f, 0xa0},
- {0x0174, 0x00}, /* No-Binning */
- {0x0175, 0x00},
{0x0624, 0x0c},
{0x0625, 0xd0},
{0x0626, 0x09},
@@ -233,8 +240,6 @@ static const struct imx219_reg mode_1920_1080_regs[] = {
{0x016d, 0x80},
{0x016e, 0x04},
{0x016f, 0x38},
- {0x0174, 0x00}, /* No-Binning */
- {0x0175, 0x00},
{0x0624, 0x07},
{0x0625, 0x80},
{0x0626, 0x04},
@@ -254,8 +259,6 @@ static const struct imx219_reg mode_1640_1232_regs[] = {
{0x016d, 0x68},
{0x016e, 0x04},
{0x016f, 0xd0},
- {0x0174, 0x01}, /* x2-Binning */
- {0x0175, 0x01},
{0x0624, 0x06},
{0x0625, 0x68},
{0x0626, 0x04},
@@ -275,8 +278,6 @@ static const struct imx219_reg mode_640_480_regs[] = {
{0x016d, 0x80},
{0x016e, 0x01},
{0x016f, 0xe0},
- {0x0174, 0x03}, /* x2-analog binning */
- {0x0175, 0x03},
{0x0624, 0x06},
{0x0625, 0x68},
{0x0626, 0x04},
@@ -390,6 +391,7 @@ static const struct imx219_mode supported_modes[] = {
.num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
.regs = mode_3280x2464_regs,
},
+ .binning = false,
},
{
/* 1080P 30fps cropped */
@@ -406,6 +408,7 @@ static const struct imx219_mode supported_modes[] = {
.num_of_regs = ARRAY_SIZE(mode_1920_1080_regs),
.regs = mode_1920_1080_regs,
},
+ .binning = false,
},
{
/* 2x2 binned 30fps mode */
@@ -422,6 +425,7 @@ static const struct imx219_mode supported_modes[] = {
.num_of_regs = ARRAY_SIZE(mode_1640_1232_regs),
.regs = mode_1640_1232_regs,
},
+ .binning = true,
},
{
/* 640x480 30fps mode */
@@ -438,6 +442,7 @@ static const struct imx219_mode supported_modes[] = {
.num_of_regs = ARRAY_SIZE(mode_640_480_regs),
.regs = mode_640_480_regs,
},
+ .binning = true,
},
};
@@ -884,6 +889,35 @@ static int imx219_set_framefmt(struct imx219 *imx219)
return -EINVAL;
}
+static int imx219_set_binning(struct imx219 *imx219)
+{
+ if (!imx219->mode->binning) {
+ return imx219_write_reg(imx219, IMX219_REG_BINNING_MODE,
+ IMX219_REG_VALUE_16BIT,
+ IMX219_BINNING_NONE);
+ }
+
+ switch (imx219->fmt.code) {
+ case MEDIA_BUS_FMT_SRGGB8_1X8:
+ case MEDIA_BUS_FMT_SGRBG8_1X8:
+ case MEDIA_BUS_FMT_SGBRG8_1X8:
+ case MEDIA_BUS_FMT_SBGGR8_1X8:
+ return imx219_write_reg(imx219, IMX219_REG_BINNING_MODE,
+ IMX219_REG_VALUE_16BIT,
+ IMX219_BINNING_2X2_ANALOG);
+
+ case MEDIA_BUS_FMT_SRGGB10_1X10:
+ case MEDIA_BUS_FMT_SGRBG10_1X10:
+ case MEDIA_BUS_FMT_SGBRG10_1X10:
+ case MEDIA_BUS_FMT_SBGGR10_1X10:
+ return imx219_write_reg(imx219, IMX219_REG_BINNING_MODE,
+ IMX219_REG_VALUE_16BIT,
+ IMX219_BINNING_2X2);
+ }
+
+ return -EINVAL;
+}
+
static const struct v4l2_rect *
__imx219_get_pad_crop(struct imx219 *imx219,
struct v4l2_subdev_state *sd_state,
@@ -968,6 +1002,13 @@ static int imx219_start_streaming(struct imx219 *imx219)
goto err_rpm_put;
}
+ ret = imx219_set_binning(imx219);
+ if (ret) {
+ dev_err(&client->dev, "%s failed to set binning: %d\n",
+ __func__, ret);
+ goto err_rpm_put;
+ }
+
/* Apply customized values from user */
ret = __v4l2_ctrl_handler_setup(imx219->sd.ctrl_handler);
if (ret)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 510/885] media: platform: mtk-mdp3: Fix return value check in mdp_probe()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (508 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 509/885] media: i2c: imx219: Fix binning for RAW8 capture Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 511/885] media: camss: csiphy-3ph: avoid undefined behavior Greg Kroah-Hartman
` (377 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Qiheng Lin,
AngeloGioacchino Del Regno, Hans Verkuil, Mauro Carvalho Chehab,
Sasha Levin
From: Qiheng Lin <linqiheng@huawei.com>
[ Upstream commit 1963689bed4d500236938d90c91cdd5e63c1eb28 ]
In case of error, the function mtk_mutex_get()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().
And also fix the err_free_mutex case.
Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c b/drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c
index 2d1f6ae9f0802..97edcd9d1c817 100644
--- a/drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c
+++ b/drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c
@@ -207,8 +207,8 @@ static int mdp_probe(struct platform_device *pdev)
}
for (i = 0; i < MDP_PIPE_MAX; i++) {
mdp->mdp_mutex[i] = mtk_mutex_get(&mm_pdev->dev);
- if (!mdp->mdp_mutex[i]) {
- ret = -ENODEV;
+ if (IS_ERR(mdp->mdp_mutex[i])) {
+ ret = PTR_ERR(mdp->mdp_mutex[i]);
goto err_free_mutex;
}
}
@@ -289,7 +289,8 @@ static int mdp_probe(struct platform_device *pdev)
mdp_comp_destroy(mdp);
err_free_mutex:
for (i = 0; i < MDP_PIPE_MAX; i++)
- mtk_mutex_put(mdp->mdp_mutex[i]);
+ if (!IS_ERR_OR_NULL(mdp->mdp_mutex[i]))
+ mtk_mutex_put(mdp->mdp_mutex[i]);
err_destroy_device:
kfree(mdp);
err_return:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 511/885] media: camss: csiphy-3ph: avoid undefined behavior
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (509 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 510/885] media: platform: mtk-mdp3: Fix return value check in mdp_probe() Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 512/885] media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config Greg Kroah-Hartman
` (376 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Robert Foss,
Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 05fb9ace34b8645cb76f7e3a21b5c7b754329cae ]
Marking a case of the switch statement as unreachable means the
compiler treats it as undefined behavior, which is then caught by
an objtool warning:
drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.o: warning: objtool: csiphy_lanes_enable() falls through to next function csiphy_lanes_disable()
Instead of simply continuing execution at a random place of the
driver, print a warning and return from to the caller, which
makes it possible to understand what happens and avoids the
warning.
Fixes: 53655d2a0ff2 ("media: camss: csiphy-3ph: add support for SM8250 CSI DPHY")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index 451a4c9b3d30d..04baa80494c66 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -429,7 +429,8 @@ static void csiphy_gen2_config_lanes(struct csiphy_device *csiphy,
array_size = ARRAY_SIZE(lane_regs_sm8250[0]);
break;
default:
- unreachable();
+ WARN(1, "unknown cspi version\n");
+ return;
}
for (l = 0; l < 5; l++) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 512/885] media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (510 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 511/885] media: camss: csiphy-3ph: avoid undefined behavior Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 513/885] media: platform: mtk-mdp3: fix Kconfig dependencies Greg Kroah-Hartman
` (375 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Moudy Ho,
AngeloGioacchino Del Regno, Hans Verkuil, Sasha Levin
From: Moudy Ho <moudy.ho@mediatek.com>
[ Upstream commit 9195a860ef0a384d2ca2065cc61a0cc80d620de5 ]
Since REMOTEPROC completely replaces the VIDEO_MEDIATEK_VPU in MDP3,
unused config should be removed to avoid compilation warnings
reported on i386 or x86_64.
Warning messages:
WARNING: unmet direct dependencies detected for VIDEO_MEDIATEK_VPU
Depends on [n]: MEDIA_SUPPORT [=y] && MEDIA_PLATFORM_SUPPORT [=y]
&& MEDIA_PLATFORM_DRIVERS [=y] && V4L_MEM2MEM_DRIVERS [=n] &&
VIDEO_DEV [=y] && (ARCH_MEDIATEK || COMPILE_TEST [=y])
Selected by [y]:
- VIDEO_MEDIATEK_MDP3 [=y] && MEDIA_SUPPORT [=y] &&
MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] &&
(MTK_IOMMU [=n] || COMPILE_TEST [=y]) && VIDEO_DEV [=y] &&
(ARCH_MEDIATEK || COMPILE_TEST [=y]) && HAS_DMA [=y] && REMOTEPROC
[=y]
Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: e3f7feb6d893 ("media: platform: mtk-mdp3: fix Kconfig dependencies")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/mediatek/mdp3/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/media/platform/mediatek/mdp3/Kconfig b/drivers/media/platform/mediatek/mdp3/Kconfig
index 50ae07b75b5f2..846e759a8f6a9 100644
--- a/drivers/media/platform/mediatek/mdp3/Kconfig
+++ b/drivers/media/platform/mediatek/mdp3/Kconfig
@@ -9,7 +9,6 @@ config VIDEO_MEDIATEK_MDP3
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
select MTK_MMSYS
- select VIDEO_MEDIATEK_VPU
select MTK_CMDQ
select MTK_SCP
default n
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 513/885] media: platform: mtk-mdp3: fix Kconfig dependencies
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (511 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 512/885] media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 514/885] media: v4l2-jpeg: correct the skip count in jpeg_parse_app14_data Greg Kroah-Hartman
` (374 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann,
AngeloGioacchino Del Regno, Hans Verkuil, Mauro Carvalho Chehab,
Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit e3f7feb6d89311f369dd4ad903ea62e45328cdbe ]
The new mdp3 driver uses 'select' to force-enable a couple of drivers
it depends on. This is error-prone and likely to cause dependency
loops as well as warnings like:
WARNING: unmet direct dependencies detected for VIDEO_MEDIATEK_VPU
Depends on [n]: MEDIA_SUPPORT [=m] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && V4L_MEM2MEM_DRIVERS [=n] && VIDEO_DEV [=m] && (ARCH_MEDIATEK [=y] || COMPILE_TEST [=y])
Selected by [m]:
- VIDEO_MEDIATEK_MDP3 [=m] && MEDIA_SUPPORT [=m] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && (MTK_IOMMU [=m] || COMPILE_TEST [=y]) && VIDEO_DEV [=m] && (ARCH_MEDIATEK [=y] || COMPILE_TEST [=y]) && HAS_DMA [=y] && REMOTEPROC [=y]
This specific warning was already addressed in a previous patch,
but there are similar unnecessary 'select' statements, so turn those
into 'depends on'. This also means the dependency on ARCH_MEDIATEK
is redundant and can be dropped.
Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Fixes: 9195a860ef0a ("media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/mediatek/mdp3/Kconfig | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/mediatek/mdp3/Kconfig b/drivers/media/platform/mediatek/mdp3/Kconfig
index 846e759a8f6a9..602329c447501 100644
--- a/drivers/media/platform/mediatek/mdp3/Kconfig
+++ b/drivers/media/platform/mediatek/mdp3/Kconfig
@@ -3,14 +3,13 @@ config VIDEO_MEDIATEK_MDP3
tristate "MediaTek MDP v3 driver"
depends on MTK_IOMMU || COMPILE_TEST
depends on VIDEO_DEV
- depends on ARCH_MEDIATEK || COMPILE_TEST
depends on HAS_DMA
depends on REMOTEPROC
+ depends on MTK_MMSYS
+ depends on MTK_CMDQ
+ depends on MTK_SCP
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
- select MTK_MMSYS
- select MTK_CMDQ
- select MTK_SCP
default n
help
It is a v4l2 driver and present in MediaTek MT8183 SoC.
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 514/885] media: v4l2-jpeg: correct the skip count in jpeg_parse_app14_data
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (512 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 513/885] media: platform: mtk-mdp3: fix Kconfig dependencies Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 515/885] media: v4l2-jpeg: ignore the unknown APP14 marker Greg Kroah-Hartman
` (373 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ming Qian, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Ming Qian <ming.qian@nxp.com>
[ Upstream commit 41959c4f973b837a12061b84d3a436fc64c73a30 ]
The curr pointer has advanced 14 bytes in jpeg_parse_app14_data.
1. jpeg_get_word_be(stream), it goes forward 2 bytes.
2. jpeg_skip(stream, 11), it goes forward 11 bytes.
3. jpeg_get_byte(stream), it goes forward 1 bytes.
so the remain bytes of this segment should be (lp - 2 - 11 - 1),
but not (lp - 2 - 11).
if driver skip 1 extra bytes, the following parsing may go wrong.
Fixes: b8035f7988a8 ("media: Add parsing for APP14 data segment in jpeg helpers")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/v4l2-core/v4l2-jpeg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/v4l2-core/v4l2-jpeg.c b/drivers/media/v4l2-core/v4l2-jpeg.c
index c2513b775f6a7..75c2af763d55e 100644
--- a/drivers/media/v4l2-core/v4l2-jpeg.c
+++ b/drivers/media/v4l2-core/v4l2-jpeg.c
@@ -474,7 +474,7 @@ static int jpeg_parse_app14_data(struct jpeg_stream *stream,
*tf = ret;
/* skip the rest of the segment, this ensures at least it is complete */
- skip = lp - 2 - 11;
+ skip = lp - 2 - 11 - 1;
return jpeg_skip(stream, skip);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 515/885] media: v4l2-jpeg: ignore the unknown APP14 marker
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (513 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 514/885] media: v4l2-jpeg: correct the skip count in jpeg_parse_app14_data Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 516/885] media: hantro: Fix JPEG encoder ENUM_FRMSIZE on RK3399 Greg Kroah-Hartman
` (372 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ming Qian, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Ming Qian <ming.qian@nxp.com>
[ Upstream commit 251c0ea6efd3c3ea0f8a55fdd96c749a98639bd3 ]
The legal identifier of APP14 is "Adobe\0",
but sometimes it may be
"This is an unknown APP marker . Compliant decoders must ignore it."
In this case, just ignore it.
It won't affect the decode result.
Fixes: b8035f7988a8 ("media: Add parsing for APP14 data segment in jpeg helpers")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/v4l2-core/v4l2-jpeg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/v4l2-core/v4l2-jpeg.c b/drivers/media/v4l2-core/v4l2-jpeg.c
index 75c2af763d55e..94435a7b68169 100644
--- a/drivers/media/v4l2-core/v4l2-jpeg.c
+++ b/drivers/media/v4l2-core/v4l2-jpeg.c
@@ -460,7 +460,7 @@ static int jpeg_parse_app14_data(struct jpeg_stream *stream,
/* Check for "Adobe\0" in Ap1..6 */
if (stream->curr + 6 > stream->end ||
strncmp(stream->curr, "Adobe\0", 6))
- return -EINVAL;
+ return jpeg_skip(stream, lp - 2);
/* get to Ap12 */
ret = jpeg_skip(stream, 11);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 516/885] media: hantro: Fix JPEG encoder ENUM_FRMSIZE on RK3399
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (514 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 515/885] media: v4l2-jpeg: ignore the unknown APP14 marker Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 517/885] media: imx-jpeg: Apply clk_bulk api instead of operating specific clk Greg Kroah-Hartman
` (371 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Robert Mader, Nicolas Dufresne,
Benjamin Gaignard, Ezequiel Garcia, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Nicolas Dufresne <nicolas.dufresne@collabora.com>
[ Upstream commit 29bd426764dee14a09e37700406f4a5920825fcc ]
Since 79c987de8b354, enumerating framesize on format set with "MODE_NONE"
(any raw formats) is reporting an invalid frmsize.
Size: Stepwise 0x0 - 0x0 with step 0/0
Before this change, the driver would return EINVAL, which is also invalid
but worked in GStreamer. The original intent was not to implement it, hence
the -ENOTTY return in this change. While drivers should implement
ENUM_FRMSIZE for all formats and queues, this change is limited in scope to
fix the regression.
This fixes taking picture in Gnome Cheese software, or any software using
GSteamer to encode JPEG with hardware acceleration.
Fixes: 79c987de8b35 ("media: hantro: Use post processor scaling capacities")
Reported-by: Robert Mader <robert.mader@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Robert Mader <robert.mader@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/verisilicon/hantro_v4l2.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/verisilicon/hantro_v4l2.c b/drivers/media/platform/verisilicon/hantro_v4l2.c
index 2c7a805289e7b..30e650edaea8a 100644
--- a/drivers/media/platform/verisilicon/hantro_v4l2.c
+++ b/drivers/media/platform/verisilicon/hantro_v4l2.c
@@ -161,8 +161,11 @@ static int vidioc_enum_framesizes(struct file *file, void *priv,
}
/* For non-coded formats check if postprocessing scaling is possible */
- if (fmt->codec_mode == HANTRO_MODE_NONE && hantro_needs_postproc(ctx, fmt)) {
- return hanto_postproc_enum_framesizes(ctx, fsize);
+ if (fmt->codec_mode == HANTRO_MODE_NONE) {
+ if (hantro_needs_postproc(ctx, fmt))
+ return hanto_postproc_enum_framesizes(ctx, fsize);
+ else
+ return -ENOTTY;
} else if (fsize->index != 0) {
vpu_debug(0, "invalid frame size index (expected 0, got %d)\n",
fsize->index);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 517/885] media: imx-jpeg: Apply clk_bulk api instead of operating specific clk
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (515 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 516/885] media: hantro: Fix JPEG encoder ENUM_FRMSIZE on RK3399 Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 518/885] media: amphion: correct the unspecified color space Greg Kroah-Hartman
` (370 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ming Qian, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Ming Qian <ming.qian@nxp.com>
[ Upstream commit 61fe43dc9f454bc3caa99dbdd8f5fa3ba813981a ]
using the api of clk_bulk can simplify the code.
and the clock of the jpeg codec may be changed,
the clk_bulk api can be compatible with the future change.
Fixes: 4c2e5156d9fa ("media: imx-jpeg: Add pm-runtime support for imx-jpeg")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../media/platform/nxp/imx-jpeg/mxc-jpeg.c | 35 +++++--------------
.../media/platform/nxp/imx-jpeg/mxc-jpeg.h | 4 +--
2 files changed, 10 insertions(+), 29 deletions(-)
diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c
index 32fd04a3d8bb7..81a44702a5413 100644
--- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c
+++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c
@@ -2202,19 +2202,12 @@ static int mxc_jpeg_probe(struct platform_device *pdev)
jpeg->mode = mode;
/* Get clocks */
- jpeg->clk_ipg = devm_clk_get(dev, "ipg");
- if (IS_ERR(jpeg->clk_ipg)) {
- dev_err(dev, "failed to get clock: ipg\n");
- ret = PTR_ERR(jpeg->clk_ipg);
- goto err_clk;
- }
-
- jpeg->clk_per = devm_clk_get(dev, "per");
- if (IS_ERR(jpeg->clk_per)) {
- dev_err(dev, "failed to get clock: per\n");
- ret = PTR_ERR(jpeg->clk_per);
+ ret = devm_clk_bulk_get_all(&pdev->dev, &jpeg->clks);
+ if (ret < 0) {
+ dev_err(dev, "failed to get clock\n");
goto err_clk;
}
+ jpeg->num_clks = ret;
ret = mxc_jpeg_attach_pm_domains(jpeg);
if (ret < 0) {
@@ -2311,32 +2304,20 @@ static int mxc_jpeg_runtime_resume(struct device *dev)
struct mxc_jpeg_dev *jpeg = dev_get_drvdata(dev);
int ret;
- ret = clk_prepare_enable(jpeg->clk_ipg);
- if (ret < 0) {
- dev_err(dev, "failed to enable clock: ipg\n");
- goto err_ipg;
- }
-
- ret = clk_prepare_enable(jpeg->clk_per);
+ ret = clk_bulk_prepare_enable(jpeg->num_clks, jpeg->clks);
if (ret < 0) {
- dev_err(dev, "failed to enable clock: per\n");
- goto err_per;
+ dev_err(dev, "failed to enable clock\n");
+ return ret;
}
return 0;
-
-err_per:
- clk_disable_unprepare(jpeg->clk_ipg);
-err_ipg:
- return ret;
}
static int mxc_jpeg_runtime_suspend(struct device *dev)
{
struct mxc_jpeg_dev *jpeg = dev_get_drvdata(dev);
- clk_disable_unprepare(jpeg->clk_ipg);
- clk_disable_unprepare(jpeg->clk_per);
+ clk_bulk_disable_unprepare(jpeg->num_clks, jpeg->clks);
return 0;
}
diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h
index c508d41a906f4..d742b638ddc93 100644
--- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h
+++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h
@@ -114,8 +114,8 @@ struct mxc_jpeg_dev {
spinlock_t hw_lock; /* hardware access lock */
unsigned int mode;
struct mutex lock; /* v4l2 ioctls serialization */
- struct clk *clk_ipg;
- struct clk *clk_per;
+ struct clk_bulk_data *clks;
+ int num_clks;
struct platform_device *pdev;
struct device *dev;
void __iomem *base_reg;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 518/885] media: amphion: correct the unspecified color space
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (516 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 517/885] media: imx-jpeg: Apply clk_bulk api instead of operating specific clk Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 519/885] media: drivers/media/v4l2-core/v4l2-h264 : add detection of null pointers Greg Kroah-Hartman
` (369 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ming Qian, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Ming Qian <ming.qian@nxp.com>
[ Upstream commit 809060c8a357e020010dd8f797a5efd3c5432b13 ]
in the E.2.1 of Rec. ITU-T H.264 (06/2019),
0 of colour primaries is reserved, and 2 is unspecified.
driver can map V4L2_COLORSPACE_LAST to 0,
and map V4L2_COLORSPACE_DEFAULT to 2.
v4l2_xfer_func and v4l2_ycbcr_encoding are similar case.
Fixes: 3cd084519c6f ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/amphion/vpu_color.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/amphion/vpu_color.c b/drivers/media/platform/amphion/vpu_color.c
index 80b9a53fd1c14..4ae435cbc5cda 100644
--- a/drivers/media/platform/amphion/vpu_color.c
+++ b/drivers/media/platform/amphion/vpu_color.c
@@ -17,7 +17,7 @@
#include "vpu_helpers.h"
static const u8 colorprimaries[] = {
- 0,
+ V4L2_COLORSPACE_LAST,
V4L2_COLORSPACE_REC709, /*Rec. ITU-R BT.709-6*/
0,
0,
@@ -31,7 +31,7 @@ static const u8 colorprimaries[] = {
};
static const u8 colortransfers[] = {
- 0,
+ V4L2_XFER_FUNC_LAST,
V4L2_XFER_FUNC_709, /*Rec. ITU-R BT.709-6*/
0,
0,
@@ -53,7 +53,7 @@ static const u8 colortransfers[] = {
};
static const u8 colormatrixcoefs[] = {
- 0,
+ V4L2_YCBCR_ENC_LAST,
V4L2_YCBCR_ENC_709, /*Rec. ITU-R BT.709-6*/
0,
0,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 519/885] media: drivers/media/v4l2-core/v4l2-h264 : add detection of null pointers
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (517 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 518/885] media: amphion: correct the unspecified color space Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 520/885] media: rc: Fix use-after-free bugs caused by ene_tx_irqsim() Greg Kroah-Hartman
` (368 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dong Chuanjian, Nicolas Dufresne,
Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin
From: Dong Chuanjian <chuanjian@nfschina.com>
[ Upstream commit be3ae7cf4326e95bb1d5413b63baabc26f4a1324 ]
When the pointer variable is judged to be null, null is returned
directly.
[hverkuil: fix two checkpatch warnings]
Signed-off-by: Dong Chuanjian <chuanjian@nfschina.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Fixes: d3f756ad629b ("media: v4l2: Trace calculated p/b0/b1 initial reflist")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/v4l2-core/v4l2-h264.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/media/v4l2-core/v4l2-h264.c b/drivers/media/v4l2-core/v4l2-h264.c
index 72bd64f651981..c00197d095e75 100644
--- a/drivers/media/v4l2-core/v4l2-h264.c
+++ b/drivers/media/v4l2-core/v4l2-h264.c
@@ -305,6 +305,8 @@ static const char *format_ref_list_p(const struct v4l2_h264_reflist_builder *bui
int n = 0, i;
*out_str = kmalloc(tmp_str_size, GFP_KERNEL);
+ if (!(*out_str))
+ return NULL;
n += snprintf(*out_str + n, tmp_str_size - n, "|");
@@ -343,6 +345,8 @@ static const char *format_ref_list_b(const struct v4l2_h264_reflist_builder *bui
int n = 0, i;
*out_str = kmalloc(tmp_str_size, GFP_KERNEL);
+ if (!(*out_str))
+ return NULL;
n += snprintf(*out_str + n, tmp_str_size - n, "|");
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 520/885] media: rc: Fix use-after-free bugs caused by ene_tx_irqsim()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (518 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 519/885] media: drivers/media/v4l2-core/v4l2-h264 : add detection of null pointers Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 521/885] media: atomisp: Only set default_run_mode on first open of a stream/asd Greg Kroah-Hartman
` (367 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Duoming Zhou, Sean Young,
Mauro Carvalho Chehab, Sasha Levin
From: Duoming Zhou <duoming@zju.edu.cn>
[ Upstream commit 29b0589a865b6f66d141d79b2dd1373e4e50fe17 ]
When the ene device is detaching, function ene_remove() will
be called. But there is no function to cancel tx_sim_timer
in ene_remove(), the timer handler ene_tx_irqsim() could race
with ene_remove(). As a result, the UAF bugs could happen,
the process is shown below.
(cleanup routine) | (timer routine)
| mod_timer(&dev->tx_sim_timer, ..)
ene_remove() | (wait a time)
| ene_tx_irqsim()
| dev->hw_lock //USE
| ene_tx_sample(dev) //USE
Fix by adding del_timer_sync(&dev->tx_sim_timer) in ene_remove(),
The tx_sim_timer could stop before ene device is deallocated.
What's more, The rc_unregister_device() and del_timer_sync()
should be called first in ene_remove() and the deallocated
functions such as free_irq(), release_region() and so on
should be called behind them. Because the rc_unregister_device()
is well synchronized. Otherwise, race conditions may happen. The
situations that may lead to race conditions are shown below.
Firstly, the rx receiver is disabled with ene_rx_disable()
before rc_unregister_device() in ene_remove(), which means it
can be enabled again if a process opens /dev/lirc0 between
ene_rx_disable() and rc_unregister_device().
Secondly, the irqaction descriptor is freed by free_irq()
before the rc device is unregistered, which means irqaction
descriptor may be accessed again after it is deallocated.
Thirdly, the timer can call ene_tx_sample() that can write
to the io ports, which means the io ports could be accessed
again after they are deallocated by release_region().
Therefore, the rc_unregister_device() and del_timer_sync()
should be called first in ene_remove().
Suggested by: Sean Young <sean@mess.org>
Fixes: 9ea53b74df9c ("V4L/DVB: STAGING: remove lirc_ene0100 driver")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/rc/ene_ir.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index e09270916fbca..11ee21a7db8f0 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -1106,6 +1106,8 @@ static void ene_remove(struct pnp_dev *pnp_dev)
struct ene_device *dev = pnp_get_drvdata(pnp_dev);
unsigned long flags;
+ rc_unregister_device(dev->rdev);
+ del_timer_sync(&dev->tx_sim_timer);
spin_lock_irqsave(&dev->hw_lock, flags);
ene_rx_disable(dev);
ene_rx_restore_hw_buffer(dev);
@@ -1113,7 +1115,6 @@ static void ene_remove(struct pnp_dev *pnp_dev)
free_irq(dev->irq, dev);
release_region(dev->hw_io, ENE_IO_SIZE);
- rc_unregister_device(dev->rdev);
kfree(dev);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 521/885] media: atomisp: Only set default_run_mode on first open of a stream/asd
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (519 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 520/885] media: rc: Fix use-after-free bugs caused by ene_tx_irqsim() Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 522/885] media: i2c: ov7670: 0 instead of -EINVAL was returned Greg Kroah-Hartman
` (366 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko, Hans de Goede,
Mauro Carvalho Chehab, Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit 60ec70a71a9f9975a5d2dd4a7d97c20da0e41976 ]
Calling v4l2_ctrl_s_ctrl(asd->run_mode, pipe->default_run_mode) when
the stream is already active (through another /dev/video# node) causes
the stream to stop.
Move the call to set the default run-mode so that it is only done
on the first open of one of the 4 /dev/video# nodes of one of
the 2 streams (atomisp-sub-devices / asd-s).
Fixes: 2c45e343c581 ("media: atomisp: set per-device's default mode")
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/media/atomisp/pci/atomisp_fops.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_fops.c b/drivers/staging/media/atomisp/pci/atomisp_fops.c
index 84a84e0cdeef7..5fa2e2596a818 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_fops.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_fops.c
@@ -741,13 +741,13 @@ static int atomisp_open(struct file *file)
goto done;
atomisp_subdev_init_struct(asd);
+ /* Ensure that a mode is set */
+ v4l2_ctrl_s_ctrl(asd->run_mode, pipe->default_run_mode);
done:
pipe->users++;
mutex_unlock(&isp->mutex);
- /* Ensure that a mode is set */
- v4l2_ctrl_s_ctrl(asd->run_mode, pipe->default_run_mode);
return 0;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 522/885] media: i2c: ov7670: 0 instead of -EINVAL was returned
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (520 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 521/885] media: atomisp: Only set default_run_mode on first open of a stream/asd Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 523/885] media: usb: siano: Fix use after free bugs caused by do_submit_urb Greg Kroah-Hartman
` (365 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hans Verkuil, Sakari Ailus,
Mauro Carvalho Chehab, Sasha Levin
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[ Upstream commit 6a4c664539e6de9b32b65ddcf767ec1bcc1d7f8a ]
If the media bus is unsupported, then return -EINVAL. Instead it
returned 'ret' which happened to be 0.
This fixes a smatch warning:
ov7670.c:1843 ov7670_parse_dt() warn: missing error code? 'ret'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 01b8444828fc ("media: v4l2: i2c: ov7670: Implement OF mbus configuration")
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/ov7670.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index 4b9b156b53c7a..c06364c1cbd1b 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -1841,7 +1841,7 @@ static int ov7670_parse_dt(struct device *dev,
if (bus_cfg.bus_type != V4L2_MBUS_PARALLEL) {
dev_err(dev, "Unsupported media bus type\n");
- return ret;
+ return -EINVAL;
}
info->mbus_config = bus_cfg.bus.parallel.flags;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 523/885] media: usb: siano: Fix use after free bugs caused by do_submit_urb
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (521 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 522/885] media: i2c: ov7670: 0 instead of -EINVAL was returned Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 524/885] media: saa7134: Use video_unregister_device for radio_dev Greg Kroah-Hartman
` (364 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Duoming Zhou, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Duoming Zhou <duoming@zju.edu.cn>
[ Upstream commit ebad8e731c1c06adf04621d6fd327b860c0861b5 ]
There are UAF bugs caused by do_submit_urb(). One of the KASan reports
is shown below:
[ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890
[ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49
[ 36.408316]
[ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8
[ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584
[ 36.416157] Workqueue: 0x0 (events)
[ 36.417654] Call Trace:
[ 36.418546] <TASK>
[ 36.419320] dump_stack_lvl+0x96/0xd0
[ 36.420522] print_address_description+0x75/0x350
[ 36.421992] print_report+0x11b/0x250
[ 36.423174] ? _raw_spin_lock_irqsave+0x87/0xd0
[ 36.424806] ? __virt_addr_valid+0xcf/0x170
[ 36.426069] ? worker_thread+0x4a2/0x890
[ 36.427355] kasan_report+0x131/0x160
[ 36.428556] ? worker_thread+0x4a2/0x890
[ 36.430053] worker_thread+0x4a2/0x890
[ 36.431297] ? worker_clr_flags+0x90/0x90
[ 36.432479] kthread+0x166/0x190
[ 36.433493] ? kthread_blkcg+0x50/0x50
[ 36.434669] ret_from_fork+0x22/0x30
[ 36.435923] </TASK>
[ 36.436684]
[ 36.437215] Allocated by task 24:
[ 36.438289] kasan_set_track+0x50/0x80
[ 36.439436] __kasan_kmalloc+0x89/0xa0
[ 36.440566] smsusb_probe+0x374/0xc90
[ 36.441920] usb_probe_interface+0x2d1/0x4c0
[ 36.443253] really_probe+0x1d5/0x580
[ 36.444539] __driver_probe_device+0xe3/0x130
[ 36.446085] driver_probe_device+0x49/0x220
[ 36.447423] __device_attach_driver+0x19e/0x1b0
[ 36.448931] bus_for_each_drv+0xcb/0x110
[ 36.450217] __device_attach+0x132/0x1f0
[ 36.451470] bus_probe_device+0x59/0xf0
[ 36.452563] device_add+0x4ec/0x7b0
[ 36.453830] usb_set_configuration+0xc63/0xe10
[ 36.455230] usb_generic_driver_probe+0x3b/0x80
[ 36.456166] printk: console [ttyGS0] disabled
[ 36.456569] usb_probe_device+0x90/0x110
[ 36.459523] really_probe+0x1d5/0x580
[ 36.461027] __driver_probe_device+0xe3/0x130
[ 36.462465] driver_probe_device+0x49/0x220
[ 36.463847] __device_attach_driver+0x19e/0x1b0
[ 36.465229] bus_for_each_drv+0xcb/0x110
[ 36.466466] __device_attach+0x132/0x1f0
[ 36.467799] bus_probe_device+0x59/0xf0
[ 36.469010] device_add+0x4ec/0x7b0
[ 36.470125] usb_new_device+0x863/0xa00
[ 36.471374] hub_event+0x18c7/0x2220
[ 36.472746] process_one_work+0x34c/0x5b0
[ 36.474041] worker_thread+0x4b7/0x890
[ 36.475216] kthread+0x166/0x190
[ 36.476267] ret_from_fork+0x22/0x30
[ 36.477447]
[ 36.478160] Freed by task 24:
[ 36.479239] kasan_set_track+0x50/0x80
[ 36.480512] kasan_save_free_info+0x2b/0x40
[ 36.481808] ____kasan_slab_free+0x122/0x1a0
[ 36.483173] __kmem_cache_free+0xc4/0x200
[ 36.484563] smsusb_term_device+0xcd/0xf0
[ 36.485896] smsusb_probe+0xc85/0xc90
[ 36.486976] usb_probe_interface+0x2d1/0x4c0
[ 36.488303] really_probe+0x1d5/0x580
[ 36.489498] __driver_probe_device+0xe3/0x130
[ 36.491140] driver_probe_device+0x49/0x220
[ 36.492475] __device_attach_driver+0x19e/0x1b0
[ 36.493988] bus_for_each_drv+0xcb/0x110
[ 36.495171] __device_attach+0x132/0x1f0
[ 36.496617] bus_probe_device+0x59/0xf0
[ 36.497875] device_add+0x4ec/0x7b0
[ 36.498972] usb_set_configuration+0xc63/0xe10
[ 36.500264] usb_generic_driver_probe+0x3b/0x80
[ 36.501740] usb_probe_device+0x90/0x110
[ 36.503084] really_probe+0x1d5/0x580
[ 36.504241] __driver_probe_device+0xe3/0x130
[ 36.505548] driver_probe_device+0x49/0x220
[ 36.506766] __device_attach_driver+0x19e/0x1b0
[ 36.508368] bus_for_each_drv+0xcb/0x110
[ 36.509646] __device_attach+0x132/0x1f0
[ 36.510911] bus_probe_device+0x59/0xf0
[ 36.512103] device_add+0x4ec/0x7b0
[ 36.513215] usb_new_device+0x863/0xa00
[ 36.514736] hub_event+0x18c7/0x2220
[ 36.516130] process_one_work+0x34c/0x5b0
[ 36.517396] worker_thread+0x4b7/0x890
[ 36.518591] kthread+0x166/0x190
[ 36.519599] ret_from_fork+0x22/0x30
[ 36.520851]
[ 36.521405] Last potentially related work creation:
[ 36.523143] kasan_save_stack+0x3f/0x60
[ 36.524275] kasan_record_aux_stack_noalloc+0x9d/0xb0
[ 36.525831] insert_work+0x25/0x130
[ 36.527039] __queue_work+0x4d4/0x620
[ 36.528236] queue_work_on+0x72/0xb0
[ 36.529344] __usb_hcd_giveback_urb+0x13f/0x1b0
[ 36.530819] dummy_timer+0x350/0x1a40
[ 36.532149] call_timer_fn+0x2c/0x190
[ 36.533567] expire_timers+0x69/0x1f0
[ 36.534736] __run_timers+0x289/0x2d0
[ 36.535841] run_timer_softirq+0x2d/0x60
[ 36.537110] __do_softirq+0x116/0x380
[ 36.538377]
[ 36.538950] Second to last potentially related work creation:
[ 36.540855] kasan_save_stack+0x3f/0x60
[ 36.542084] kasan_record_aux_stack_noalloc+0x9d/0xb0
[ 36.543592] insert_work+0x25/0x130
[ 36.544891] __queue_work+0x4d4/0x620
[ 36.546168] queue_work_on+0x72/0xb0
[ 36.547328] __usb_hcd_giveback_urb+0x13f/0x1b0
[ 36.548805] dummy_timer+0x350/0x1a40
[ 36.550116] call_timer_fn+0x2c/0x190
[ 36.551570] expire_timers+0x69/0x1f0
[ 36.552762] __run_timers+0x289/0x2d0
[ 36.553916] run_timer_softirq+0x2d/0x60
[ 36.555118] __do_softirq+0x116/0x380
[ 36.556239]
[ 36.556807] The buggy address belongs to the object at ffff888005960000
[ 36.556807] which belongs to the cache kmalloc-4k of size 4096
[ 36.560652] The buggy address is located 232 bytes inside of
[ 36.560652] 4096-byte region [ffff888005960000, ffff888005961000)
[ 36.564791]
[ 36.565355] The buggy address belongs to the physical page:
[ 36.567212] page:000000004f0a0731 refcount:1 mapcount:0 mapping:0000000000000000 index:0x00
[ 36.570534] head:000000004f0a0731 order:3 compound_mapcount:0 subpages_mapcount:0 compound0
[ 36.573717] flags: 0x100000000010200(slab|head|node=0|zone=1)
[ 36.575481] raw: 0100000000010200 ffff888001042140 dead000000000122 0000000000000000
[ 36.577842] raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000
[ 36.580175] page dumped because: kasan: bad access detected
[ 36.581994]
[ 36.582548] Memory state around the buggy address:
[ 36.583983] ffff88800595ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 36.586240] ffff888005960000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 36.588884] >ffff888005960080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 36.591071] ^
[ 36.593295] ffff888005960100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 36.595705] ffff888005960180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 36.598026] ==================================================================
[ 36.600224] Disabling lock debugging due to kernel taint
[ 36.602681] general protection fault, probably for non-canonical address 0x43600a000000060I
[ 36.607129] CPU: 0 PID: 49 Comm: kworker/0:2 Tainted: G B 6.2.0-rc3-15798-8
[ 36.611115] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584
[ 36.615026] Workqueue: events do_submit_urb
[ 36.616290] RIP: 0010:_raw_spin_lock_irqsave+0x8a/0xd0
[ 36.618107] Code: 24 00 00 00 00 48 89 df be 04 00 00 00 e8 9e b5 c6 fe 48 89 ef be 04 00 5
[ 36.623522] RSP: 0018:ffff888004b6fcf0 EFLAGS: 00010046
[ 36.625072] RAX: 0000000000000000 RBX: 043600a000000060 RCX: ffffffff9fc0e0d7
[ 36.627206] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff888004b6fcf0
[ 36.629813] RBP: ffff888004b6fcf0 R08: dffffc0000000000 R09: ffffed100096df9f
[ 36.631974] R10: dfffe9100096dfa0 R11: 1ffff1100096df9e R12: ffff888005960020
[ 36.634285] R13: ffff8880059600f0 R14: 0000000000000246 R15: 0000000000000001
[ 36.636438] FS: 0000000000000000(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000
[ 36.639092] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 36.640951] CR2: 00007f07476819a3 CR3: 0000000004a34000 CR4: 00000000000006f0
[ 36.643411] Call Trace:
[ 36.644215] <TASK>
[ 36.644902] smscore_getbuffer+0x3e/0x1e0
[ 36.646147] do_submit_urb+0x4f/0x190
[ 36.647449] process_one_work+0x34c/0x5b0
[ 36.648777] worker_thread+0x4b7/0x890
[ 36.649984] ? worker_clr_flags+0x90/0x90
[ 36.651166] kthread+0x166/0x190
[ 36.652151] ? kthread_blkcg+0x50/0x50
[ 36.653547] ret_from_fork+0x22/0x30
[ 36.655051] </TASK>
[ 36.655733] Modules linked in:
[ 36.656787] ---[ end trace 0000000000000000 ]---
[ 36.658328] RIP: 0010:_raw_spin_lock_irqsave+0x8a/0xd0
[ 36.660045] Code: 24 00 00 00 00 48 89 df be 04 00 00 00 e8 9e b5 c6 fe 48 89 ef be 04 00 5
[ 36.665730] RSP: 0018:ffff888004b6fcf0 EFLAGS: 00010046
[ 36.667448] RAX: 0000000000000000 RBX: 043600a000000060 RCX: ffffffff9fc0e0d7
[ 36.669675] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff888004b6fcf0
[ 36.672645] RBP: ffff888004b6fcf0 R08: dffffc0000000000 R09: ffffed100096df9f
[ 36.674921] R10: dfffe9100096dfa0 R11: 1ffff1100096df9e R12: ffff888005960020
[ 36.677034] R13: ffff8880059600f0 R14: 0000000000000246 R15: 0000000000000001
[ 36.679184] FS: 0000000000000000(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000
[ 36.681655] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 36.683383] CR2: 00007f07476819a3 CR3: 0000000004a34000 CR4: 00000000000006f0
[ 36.685733] Kernel panic - not syncing: Fatal exception
[ 36.688585] Kernel Offset: 0x1d400000 from 0xffffffff81000000 (relocation range: 0xfffffff)
[ 36.692199] ---[ end Kernel panic - not syncing: Fatal exception ]---
When the siano device is plugged in, it may call the following functions
to initialize the device.
smsusb_probe()-->smsusb_init_device()-->smscore_start_device().
When smscore_start_device() gets failed, the function smsusb_term_device()
will be called and smsusb_device_t will be deallocated. Although we use
usb_kill_urb() in smsusb_stop_streaming() to cancel transfer requests
and wait for them to finish, the worker threads that are scheduled by
smsusb_onresponse() may be still running. As a result, the UAF bugs
could happen.
We add cancel_work_sync() in smsusb_stop_streaming() in order that the
worker threads could finish before the smsusb_device_t is deallocated.
Fixes: dd47fbd40e6e ("[media] smsusb: don't sleep while atomic")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/siano/smsusb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/usb/siano/smsusb.c b/drivers/media/usb/siano/smsusb.c
index fe9c7b3a950e8..6f443c542c6da 100644
--- a/drivers/media/usb/siano/smsusb.c
+++ b/drivers/media/usb/siano/smsusb.c
@@ -179,6 +179,7 @@ static void smsusb_stop_streaming(struct smsusb_device_t *dev)
for (i = 0; i < MAX_URBS; i++) {
usb_kill_urb(&dev->surbs[i].urb);
+ cancel_work_sync(&dev->surbs[i].wq);
if (dev->surbs[i].cb) {
smscore_putbuffer(dev->coredev, dev->surbs[i].cb);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 524/885] media: saa7134: Use video_unregister_device for radio_dev
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (522 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 523/885] media: usb: siano: Fix use after free bugs caused by do_submit_urb Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 525/885] rpmsg: glink: Avoid infinite loop on intent for missing channel Greg Kroah-Hartman
` (363 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tasos Sahanidis, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Tasos Sahanidis <tasos@tasossah.com>
[ Upstream commit bc7635c6435c77a0c168e2cc6535740adfaff4e4 ]
The radio device doesn't use vb2, thus calling vb2_video_unregister_device()
which results in the following warning being printed on module unload.
WARNING: CPU: 1 PID: 215963 at drivers/media/common/videobuf2/videobuf2-v4l2.c:1236 vb2_video_unregister_device+0xc6/0xe0 [videobuf2_v4l2]
Fixes: 11788d9b7e91 ("media: media/pci: use vb2_video_unregister_device()")
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/pci/saa7134/saa7134-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/pci/saa7134/saa7134-core.c b/drivers/media/pci/saa7134/saa7134-core.c
index 96328b0af1641..cf2871306987c 100644
--- a/drivers/media/pci/saa7134/saa7134-core.c
+++ b/drivers/media/pci/saa7134/saa7134-core.c
@@ -978,7 +978,7 @@ static void saa7134_unregister_video(struct saa7134_dev *dev)
}
if (dev->radio_dev) {
if (video_is_registered(dev->radio_dev))
- vb2_video_unregister_device(dev->radio_dev);
+ video_unregister_device(dev->radio_dev);
else
video_device_release(dev->radio_dev);
dev->radio_dev = NULL;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 525/885] rpmsg: glink: Avoid infinite loop on intent for missing channel
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (523 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 524/885] media: saa7134: Use video_unregister_device for radio_dev Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 526/885] rpmsg: glink: Release driver_override Greg Kroah-Hartman
` (362 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bjorn Andersson, Chris Lew,
Bjorn Andersson, Sasha Levin
From: Bjorn Andersson <quic_bjorande@quicinc.com>
[ Upstream commit 3e74ec2f39362bffbd42854acbb67c7f4cb808f9 ]
In the event that an intent advertisement arrives on an unknown channel
the fifo is not advanced, resulting in the same message being handled
over and over.
Fixes: dacbb35e930f ("rpmsg: glink: Receive and store the remote intent buffers")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230214234231.2069751-1-quic_bjorande@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rpmsg/qcom_glink_native.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 115c0a1eddb10..bb917746ad4bb 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -954,6 +954,7 @@ static void qcom_glink_handle_intent(struct qcom_glink *glink,
spin_unlock_irqrestore(&glink->idr_lock, flags);
if (!channel) {
dev_err(glink->dev, "intents for non-existing channel\n");
+ qcom_glink_rx_advance(glink, ALIGN(msglen, 8));
return;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 526/885] rpmsg: glink: Release driver_override
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (524 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 525/885] rpmsg: glink: Avoid infinite loop on intent for missing channel Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 527/885] ARM: OMAP2+: omap4-common: Fix refcount leak bug Greg Kroah-Hartman
` (361 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chris Lew, Bjorn Andersson,
Bjorn Andersson, Sasha Levin
From: Bjorn Andersson <quic_bjorande@quicinc.com>
[ Upstream commit fb80ef67e8ff6a00d3faad4cb348dafdb8eccfd8 ]
Upon termination of the rpmsg_device, driver_override needs to be freed
to avoid leaking the potentially assigned string.
Fixes: 42cd402b8fd4 ("rpmsg: Fix kfree() of static memory on setting driver_override")
Fixes: 39e47767ec9b ("rpmsg: Add driver_override device attribute for rpmsg_device")
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109223931.1706429-1-quic_bjorande@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/rpmsg/qcom_glink_native.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index bb917746ad4bb..35df1b0a515bf 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1447,6 +1447,7 @@ static void qcom_glink_rpdev_release(struct device *dev)
{
struct rpmsg_device *rpdev = to_rpmsg_device(dev);
+ kfree(rpdev->driver_override);
kfree(rpdev);
}
@@ -1690,6 +1691,7 @@ static void qcom_glink_device_release(struct device *dev)
/* Release qcom_glink_alloc_channel() reference */
kref_put(&channel->refcount, qcom_glink_channel_release);
+ kfree(rpdev->driver_override);
kfree(rpdev);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 527/885] ARM: OMAP2+: omap4-common: Fix refcount leak bug
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (525 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 526/885] rpmsg: glink: Release driver_override Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 528/885] arm64: dts: qcom: msm8996: Add additional A2NoC clocks Greg Kroah-Hartman
` (360 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Liang He, Tony Lindgren, Sasha Levin
From: Liang He <windhl@126.com>
[ Upstream commit 7c32919a378782c95c72bc028b5c30dfe8c11f82 ]
In omap4_sram_init(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220628112939.160737-1-windhl@126.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-omap2/omap4-common.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 6d1eb4eefefe5..d9ed2a5dcd5ef 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -140,6 +140,7 @@ static int __init omap4_sram_init(void)
__func__);
else
sram_sync = (void __iomem *)gen_pool_alloc(sram_pool, PAGE_SIZE);
+ of_node_put(np);
return 0;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 528/885] arm64: dts: qcom: msm8996: Add additional A2NoC clocks
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (526 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 527/885] ARM: OMAP2+: omap4-common: Fix refcount leak bug Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 529/885] udf: Define EFSCORRUPTED error code Greg Kroah-Hartman
` (359 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Konrad Dybcio, Dmitry Baryshkov,
Bjorn Andersson, Sasha Levin
From: Konrad Dybcio <konrad.dybcio@linaro.org>
[ Upstream commit 67fb53745e0b38275fa0b422b6a3c6c1c028c9a2 ]
On eMMC devices, the UFS clocks aren't started in the bootloader (or well,
at least it should not be, as that would just leak power..), which results
in platform reboots when trying to access the unclocked UFS hardware,
which unfortunately happens on each and every boot, as interconnect calls
sync_state and goes over each and every path.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221210200353.418391-6-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 36af4fea38e73..c103034372fd7 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -829,9 +829,11 @@ a2noc: interconnect@583000 {
compatible = "qcom,msm8996-a2noc";
reg = <0x00583000 0x7000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
+ clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>;
+ <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
+ <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+ <&gcc GCC_UFS_AXI_CLK>;
};
mnoc: interconnect@5a4000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 529/885] udf: Define EFSCORRUPTED error code
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (527 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 528/885] arm64: dts: qcom: msm8996: Add additional A2NoC clocks Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 530/885] context_tracking: Fix noinstr vs KASAN Greg Kroah-Hartman
` (358 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jan Kara, Sasha Levin
From: Jan Kara <jack@suse.cz>
[ Upstream commit 3d2d7e61553dbcc8ba45201d8ae4f383742c8202 ]
Similarly to other filesystems define EFSCORRUPTED error code for
reporting internal filesystem corruption.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/udf/udf_sb.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/udf/udf_sb.h b/fs/udf/udf_sb.h
index 4fa620543d302..2205859731dc2 100644
--- a/fs/udf/udf_sb.h
+++ b/fs/udf/udf_sb.h
@@ -51,6 +51,8 @@
#define MF_DUPLICATE_MD 0x01
#define MF_MIRROR_FE_LOADED 0x02
+#define EFSCORRUPTED EUCLEAN
+
struct udf_meta_data {
__u32 s_meta_file_loc;
__u32 s_mirror_file_loc;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 530/885] context_tracking: Fix noinstr vs KASAN
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (528 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 529/885] udf: Define EFSCORRUPTED error code Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 531/885] exit: Detect and fix irq disabled state in oops Greg Kroah-Hartman
` (357 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peter Zijlstra (Intel),
Ingo Molnar, Sasha Levin
From: Peter Zijlstra <peterz@infradead.org>
[ Upstream commit 0e26e1de0032779e43929174339429c16307a299 ]
Low level noinstr context-tracking code is calling out to instrumented
code on KASAN:
vmlinux.o: warning: objtool: __ct_user_enter+0x72: call to __kasan_check_write() leaves .noinstr.text section
vmlinux.o: warning: objtool: __ct_user_exit+0x47: call to __kasan_check_write() leaves .noinstr.text section
Use even lower level atomic methods to avoid the instrumentation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230112195542.458034262@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/context_tracking.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/kernel/context_tracking.c b/kernel/context_tracking.c
index 77978e3723771..a09f1c19336ae 100644
--- a/kernel/context_tracking.c
+++ b/kernel/context_tracking.c
@@ -510,7 +510,7 @@ void noinstr __ct_user_enter(enum ctx_state state)
* In this we case we don't care about any concurrency/ordering.
*/
if (!IS_ENABLED(CONFIG_CONTEXT_TRACKING_IDLE))
- atomic_set(&ct->state, state);
+ arch_atomic_set(&ct->state, state);
} else {
/*
* Even if context tracking is disabled on this CPU, because it's outside
@@ -527,7 +527,7 @@ void noinstr __ct_user_enter(enum ctx_state state)
*/
if (!IS_ENABLED(CONFIG_CONTEXT_TRACKING_IDLE)) {
/* Tracking for vtime only, no concurrent RCU EQS accounting */
- atomic_set(&ct->state, state);
+ arch_atomic_set(&ct->state, state);
} else {
/*
* Tracking for vtime and RCU EQS. Make sure we don't race
@@ -535,7 +535,7 @@ void noinstr __ct_user_enter(enum ctx_state state)
* RCU only requires RCU_DYNTICKS_IDX increments to be fully
* ordered.
*/
- atomic_add(state, &ct->state);
+ arch_atomic_add(state, &ct->state);
}
}
}
@@ -630,12 +630,12 @@ void noinstr __ct_user_exit(enum ctx_state state)
* In this we case we don't care about any concurrency/ordering.
*/
if (!IS_ENABLED(CONFIG_CONTEXT_TRACKING_IDLE))
- atomic_set(&ct->state, CONTEXT_KERNEL);
+ arch_atomic_set(&ct->state, CONTEXT_KERNEL);
} else {
if (!IS_ENABLED(CONFIG_CONTEXT_TRACKING_IDLE)) {
/* Tracking for vtime only, no concurrent RCU EQS accounting */
- atomic_set(&ct->state, CONTEXT_KERNEL);
+ arch_atomic_set(&ct->state, CONTEXT_KERNEL);
} else {
/*
* Tracking for vtime and RCU EQS. Make sure we don't race
@@ -643,7 +643,7 @@ void noinstr __ct_user_exit(enum ctx_state state)
* RCU only requires RCU_DYNTICKS_IDX increments to be fully
* ordered.
*/
- atomic_sub(state, &ct->state);
+ arch_atomic_sub(state, &ct->state);
}
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 531/885] exit: Detect and fix irq disabled state in oops
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (529 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 530/885] context_tracking: Fix noinstr vs KASAN Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 532/885] ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy Greg Kroah-Hartman
` (356 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michael Ellerman, Nicholas Piggin,
Peter Zijlstra (Intel),
Eric W. Biederman, Sasha Levin
From: Nicholas Piggin <npiggin@gmail.com>
[ Upstream commit 001c28e57187570e4b5aa4492c7a957fb6d65d7b ]
If a task oopses with irqs disabled, this can cause various cascading
problems in the oops path such as sleep-from-invalid warnings, and
potentially worse.
Since commit 0258b5fd7c712 ("coredump: Limit coredumps to a single
thread group"), the unconditional irq enable in coredump_task_exit()
will "fix" the irq state to be enabled early in do_exit(), so currently
this may not be triggerable, but that is coincidental and fragile.
Detect and fix the irqs_disabled() condition in the oops path before
calling do_exit(), similarly to the way in_atomic() is handled.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/lkml/20221004094401.708299-1-npiggin@gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/exit.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/kernel/exit.c b/kernel/exit.c
index 15dc2ec80c467..bccfa4218356e 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -807,6 +807,8 @@ void __noreturn do_exit(long code)
struct task_struct *tsk = current;
int group_dead;
+ WARN_ON(irqs_disabled());
+
synchronize_group_exit(tsk, code);
WARN_ON(tsk->plug);
@@ -938,6 +940,11 @@ void __noreturn make_task_dead(int signr)
if (unlikely(!tsk->pid))
panic("Attempted to kill the idle task!");
+ if (unlikely(irqs_disabled())) {
+ pr_info("note: %s[%d] exited with irqs disabled\n",
+ current->comm, task_pid_nr(current));
+ local_irq_enable();
+ }
if (unlikely(in_atomic())) {
pr_info("note: %s[%d] exited with preempt_count %d\n",
current->comm, task_pid_nr(current),
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 532/885] ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (530 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 531/885] exit: Detect and fix irq disabled state in oops Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 533/885] fs: Use CHECK_DATA_CORRUPTION() when kernel bugs are detected Greg Kroah-Hartman
` (355 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Markuss Broks, Krzysztof Kozlowski,
Sasha Levin
From: Markuss Broks <markuss.broks@gmail.com>
[ Upstream commit 5d5aa219a790d61cad2c38e1aa32058f16ad2f0b ]
For some reason, the driver adding support for Exynos5420 MIPI phy
back in 2016 wasn't used on Exynos5420, which caused a kernel panic.
Add the proper compatible for it.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20230121201844.46872-2-markuss.broks@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos5420.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 9f2523a873d9d..62263eb91b3cc 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -592,7 +592,7 @@ dp_phy: dp-video-phy {
};
mipi_phy: mipi-video-phy {
- compatible = "samsung,s5pv210-mipi-video-phy";
+ compatible = "samsung,exynos5420-mipi-video-phy";
syscon = <&pmu_system_controller>;
#phy-cells = <1>;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 533/885] fs: Use CHECK_DATA_CORRUPTION() when kernel bugs are detected
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (531 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 532/885] ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 534/885] blk-iocost: fix divide by 0 error in calc_lcoefs() Greg Kroah-Hartman
` (354 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jann Horn,
Christian Brauner (Microsoft),
Kees Cook, Sasha Levin
From: Jann Horn <jannh@google.com>
[ Upstream commit 47d586913f2abec4d240bae33417f537fda987ec ]
Currently, filp_close() and generic_shutdown_super() use printk() to log
messages when bugs are detected. This is problematic because infrastructure
like syzkaller has no idea that this message indicates a bug.
In addition, some people explicitly want their kernels to BUG() when kernel
data corruption has been detected (CONFIG_BUG_ON_DATA_CORRUPTION).
And finally, when generic_shutdown_super() detects remaining inodes on a
system without CONFIG_BUG_ON_DATA_CORRUPTION, it would be nice if later
accesses to a busy inode would at least crash somewhat cleanly rather than
walking through freed memory.
To address all three, use CHECK_DATA_CORRUPTION() when kernel bugs are
detected.
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/open.c | 5 +++--
fs/super.c | 21 +++++++++++++++++----
include/linux/poison.h | 3 +++
3 files changed, 23 insertions(+), 6 deletions(-)
diff --git a/fs/open.c b/fs/open.c
index 9d0197db15e7b..20717ec510c07 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -1411,8 +1411,9 @@ int filp_close(struct file *filp, fl_owner_t id)
{
int retval = 0;
- if (!file_count(filp)) {
- printk(KERN_ERR "VFS: Close: file count is 0\n");
+ if (CHECK_DATA_CORRUPTION(file_count(filp) == 0,
+ "VFS: Close: file count is 0 (f_op=%ps)",
+ filp->f_op)) {
return 0;
}
diff --git a/fs/super.c b/fs/super.c
index 8d39e4f11cfa3..4f8a626a35cd9 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -491,10 +491,23 @@ void generic_shutdown_super(struct super_block *sb)
if (sop->put_super)
sop->put_super(sb);
- if (!list_empty(&sb->s_inodes)) {
- printk("VFS: Busy inodes after unmount of %s. "
- "Self-destruct in 5 seconds. Have a nice day...\n",
- sb->s_id);
+ if (CHECK_DATA_CORRUPTION(!list_empty(&sb->s_inodes),
+ "VFS: Busy inodes after unmount of %s (%s)",
+ sb->s_id, sb->s_type->name)) {
+ /*
+ * Adding a proper bailout path here would be hard, but
+ * we can at least make it more likely that a later
+ * iput_final() or such crashes cleanly.
+ */
+ struct inode *inode;
+
+ spin_lock(&sb->s_inode_list_lock);
+ list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
+ inode->i_op = VFS_PTR_POISON;
+ inode->i_sb = VFS_PTR_POISON;
+ inode->i_mapping = VFS_PTR_POISON;
+ }
+ spin_unlock(&sb->s_inode_list_lock);
}
}
spin_lock(&sb_lock);
diff --git a/include/linux/poison.h b/include/linux/poison.h
index 2d3249eb0e62d..0e8a1f2ceb2f1 100644
--- a/include/linux/poison.h
+++ b/include/linux/poison.h
@@ -84,4 +84,7 @@
/********** kernel/bpf/ **********/
#define BPF_PTR_POISON ((void *)(0xeB9FUL + POISON_POINTER_DELTA))
+/********** VFS **********/
+#define VFS_PTR_POISON ((void *)(0xF5 + POISON_POINTER_DELTA))
+
#endif
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 534/885] blk-iocost: fix divide by 0 error in calc_lcoefs()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (532 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 533/885] fs: Use CHECK_DATA_CORRUPTION() when kernel bugs are detected Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 535/885] blk-cgroup: dropping parent refcount after pd_free_fn() is done Greg Kroah-Hartman
` (353 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Li Nan, Yu Kuai, Tejun Heo,
Jens Axboe, Sasha Levin
From: Li Nan <linan122@huawei.com>
[ Upstream commit 984af1e66b4126cf145153661cc24c213e2ec231 ]
echo max of u64 to cost.model can cause divide by 0 error.
# echo 8:0 rbps=18446744073709551615 > /sys/fs/cgroup/io.cost.model
divide error: 0000 [#1] PREEMPT SMP
RIP: 0010:calc_lcoefs+0x4c/0xc0
Call Trace:
<TASK>
ioc_refresh_params+0x2b3/0x4f0
ioc_cost_model_write+0x3cb/0x4c0
? _copy_from_iter+0x6d/0x6c0
? kernfs_fop_write_iter+0xfc/0x270
cgroup_file_write+0xa0/0x200
kernfs_fop_write_iter+0x17d/0x270
vfs_write+0x414/0x620
ksys_write+0x73/0x160
__x64_sys_write+0x1e/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
calc_lcoefs() uses the input value of cost.model in DIV_ROUND_UP_ULL,
overflow would happen if bps plus IOC_PAGE_SIZE is greater than
ULLONG_MAX, it can cause divide by 0 error.
Fix the problem by setting basecost
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230117070806.3857142-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-iocost.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/block/blk-iocost.c b/block/blk-iocost.c
index 495396425bade..bfc33fa9a063c 100644
--- a/block/blk-iocost.c
+++ b/block/blk-iocost.c
@@ -865,9 +865,14 @@ static void calc_lcoefs(u64 bps, u64 seqiops, u64 randiops,
*page = *seqio = *randio = 0;
- if (bps)
- *page = DIV64_U64_ROUND_UP(VTIME_PER_SEC,
- DIV_ROUND_UP_ULL(bps, IOC_PAGE_SIZE));
+ if (bps) {
+ u64 bps_pages = DIV_ROUND_UP_ULL(bps, IOC_PAGE_SIZE);
+
+ if (bps_pages)
+ *page = DIV64_U64_ROUND_UP(VTIME_PER_SEC, bps_pages);
+ else
+ *page = 1;
+ }
if (seqiops) {
v = DIV64_U64_ROUND_UP(VTIME_PER_SEC, seqiops);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 535/885] blk-cgroup: dropping parent refcount after pd_free_fn() is done
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (533 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 534/885] blk-iocost: fix divide by 0 error in calc_lcoefs() Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 536/885] blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy() Greg Kroah-Hartman
` (352 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yu Kuai, Tejun Heo,
Christoph Hellwig, Jens Axboe, Sasha Levin
From: Yu Kuai <yukuai3@huawei.com>
[ Upstream commit c7241babf0855d8a6180cd1743ff0ec34de40b4e ]
Some cgroup policies will access parent pd through child pd even
after pd_offline_fn() is done. If pd_free_fn() for parent is called
before child, then UAF can be triggered. Hence it's better to guarantee
the order of pd_free_fn().
Currently refcount of parent blkg is dropped in __blkg_release(), which
is before pd_free_fn() is called in blkg_free_work_fn() while
blkg_free_work_fn() is called asynchronously.
This patch make sure pd_free_fn() called from removing cgroup is ordered
by delaying dropping parent refcount after calling pd_free_fn() for
child.
BTW, pd_free_fn() will also be called from blkcg_deactivate_policy()
from deleting device, and following patches will guarantee the order.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230119110350.2287325-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-cgroup.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 7c91d9195da8d..8d1b7757f1e4f 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -93,6 +93,8 @@ static void blkg_free_workfn(struct work_struct *work)
if (blkg->pd[i])
blkcg_policy[i]->pd_free_fn(blkg->pd[i]);
+ if (blkg->parent)
+ blkg_put(blkg->parent);
if (blkg->q)
blk_put_queue(blkg->q);
free_percpu(blkg->iostat_cpu);
@@ -127,8 +129,6 @@ static void __blkg_release(struct rcu_head *rcu)
/* release the blkcg and parent blkg refs this blkg has been holding */
css_put(&blkg->blkcg->css);
- if (blkg->parent)
- blkg_put(blkg->parent);
blkg_free(blkg);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 536/885] blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (534 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 535/885] blk-cgroup: dropping parent refcount after pd_free_fn() is done Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 537/885] trace/blktrace: fix memory leak with using debugfs_lookup() Greg Kroah-Hartman
` (351 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yu Kuai, Tejun Heo,
Christoph Hellwig, Jens Axboe, Sasha Levin
From: Yu Kuai <yukuai3@huawei.com>
[ Upstream commit f1c006f1c6850c14040f8337753a63119bba39b9 ]
Currently parent pd can be freed before child pd:
t1: remove cgroup C1
blkcg_destroy_blkgs
blkg_destroy
list_del_init(&blkg->q_node)
// remove blkg from queue list
percpu_ref_kill(&blkg->refcnt)
blkg_release
call_rcu
t2: from t1
__blkg_release
blkg_free
schedule_work
t4: deactivate policy
blkcg_deactivate_policy
pd_free_fn
// parent of C1 is freed first
t3: from t2
blkg_free_workfn
pd_free_fn
If policy(for example, ioc_timer_fn() from iocost) access parent pd from
child pd after pd_offline_fn(), then UAF can be triggered.
Fix the problem by delaying 'list_del_init(&blkg->q_node)' from
blkg_destroy() to blkg_free_workfn(), and using a new disk level mutex to
synchronize blkg_free_workfn() and blkcg_deactivate_policy().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230119110350.2287325-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-cgroup.c | 35 +++++++++++++++++++++++++++++------
include/linux/blkdev.h | 1 +
2 files changed, 30 insertions(+), 6 deletions(-)
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 8d1b7757f1e4f..f8b21bead6552 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -87,16 +87,32 @@ static void blkg_free_workfn(struct work_struct *work)
{
struct blkcg_gq *blkg = container_of(work, struct blkcg_gq,
free_work);
+ struct request_queue *q = blkg->q;
int i;
+ /*
+ * pd_free_fn() can also be called from blkcg_deactivate_policy(),
+ * in order to make sure pd_free_fn() is called in order, the deletion
+ * of the list blkg->q_node is delayed to here from blkg_destroy(), and
+ * blkcg_mutex is used to synchronize blkg_free_workfn() and
+ * blkcg_deactivate_policy().
+ */
+ if (q)
+ mutex_lock(&q->blkcg_mutex);
+
for (i = 0; i < BLKCG_MAX_POLS; i++)
if (blkg->pd[i])
blkcg_policy[i]->pd_free_fn(blkg->pd[i]);
if (blkg->parent)
blkg_put(blkg->parent);
- if (blkg->q)
- blk_put_queue(blkg->q);
+
+ if (q) {
+ list_del_init(&blkg->q_node);
+ mutex_unlock(&q->blkcg_mutex);
+ blk_put_queue(q);
+ }
+
free_percpu(blkg->iostat_cpu);
percpu_ref_exit(&blkg->refcnt);
kfree(blkg);
@@ -425,9 +441,14 @@ static void blkg_destroy(struct blkcg_gq *blkg)
lockdep_assert_held(&blkg->q->queue_lock);
lockdep_assert_held(&blkcg->lock);
- /* Something wrong if we are trying to remove same group twice */
- WARN_ON_ONCE(list_empty(&blkg->q_node));
- WARN_ON_ONCE(hlist_unhashed(&blkg->blkcg_node));
+ /*
+ * blkg stays on the queue list until blkg_free_workfn(), see details in
+ * blkg_free_workfn(), hence this function can be called from
+ * blkcg_destroy_blkgs() first and again from blkg_destroy_all() before
+ * blkg_free_workfn().
+ */
+ if (hlist_unhashed(&blkg->blkcg_node))
+ return;
for (i = 0; i < BLKCG_MAX_POLS; i++) {
struct blkcg_policy *pol = blkcg_policy[i];
@@ -439,7 +460,6 @@ static void blkg_destroy(struct blkcg_gq *blkg)
blkg->online = false;
radix_tree_delete(&blkcg->blkg_tree, blkg->q->id);
- list_del_init(&blkg->q_node);
hlist_del_init_rcu(&blkg->blkcg_node);
/*
@@ -1226,6 +1246,7 @@ int blkcg_init_disk(struct gendisk *disk)
int ret;
INIT_LIST_HEAD(&q->blkg_list);
+ mutex_init(&q->blkcg_mutex);
new_blkg = blkg_alloc(&blkcg_root, disk, GFP_KERNEL);
if (!new_blkg)
@@ -1463,6 +1484,7 @@ void blkcg_deactivate_policy(struct request_queue *q,
if (queue_is_mq(q))
blk_mq_freeze_queue(q);
+ mutex_lock(&q->blkcg_mutex);
spin_lock_irq(&q->queue_lock);
__clear_bit(pol->plid, q->blkcg_pols);
@@ -1481,6 +1503,7 @@ void blkcg_deactivate_policy(struct request_queue *q,
}
spin_unlock_irq(&q->queue_lock);
+ mutex_unlock(&q->blkcg_mutex);
if (queue_is_mq(q))
blk_mq_unfreeze_queue(q);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 891f8cbcd0436..1680b6e1e5362 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -487,6 +487,7 @@ struct request_queue {
DECLARE_BITMAP (blkcg_pols, BLKCG_MAX_POLS);
struct blkcg_gq *root_blkg;
struct list_head blkg_list;
+ struct mutex blkcg_mutex;
#endif
struct queue_limits limits;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 537/885] trace/blktrace: fix memory leak with using debugfs_lookup()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (535 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 536/885] blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy() Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 538/885] btrfs: scrub: improve tree block error reporting Greg Kroah-Hartman
` (350 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jens Axboe, Steven Rostedt,
Masami Hiramatsu, linux-block, linux-kernel, linux-trace-kernel,
Bart Van Assche, Sasha Levin
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83e8864fee26f63a7435e941b7c36a20fd6fe93e ]
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230202141956.2299521-1-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/trace/blktrace.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index a66cff5a18579..a5b35bcfb0602 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -320,8 +320,8 @@ static void blk_trace_free(struct request_queue *q, struct blk_trace *bt)
* under 'q->debugfs_dir', thus lookup and remove them.
*/
if (!bt->dir) {
- debugfs_remove(debugfs_lookup("dropped", q->debugfs_dir));
- debugfs_remove(debugfs_lookup("msg", q->debugfs_dir));
+ debugfs_lookup_and_remove("dropped", q->debugfs_dir);
+ debugfs_lookup_and_remove("msg", q->debugfs_dir);
} else {
debugfs_remove(bt->dir);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 538/885] btrfs: scrub: improve tree block error reporting
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (536 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 537/885] trace/blktrace: fix memory leak with using debugfs_lookup() Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 539/885] arm64: zynqmp: Enable hs termination flag for USB dwc3 controller Greg Kroah-Hartman
` (349 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Qu Wenruo, David Sterba, Sasha Levin
From: Qu Wenruo <wqu@suse.com>
[ Upstream commit 28232909ba43561887508a6ef46d7f33a648f375 ]
[BUG]
When debugging a scrub related metadata error, it turns out that our
metadata error reporting is not ideal.
The only 3 error messages are:
- BTRFS error (device dm-2): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 0, gen 1
Showing we have metadata generation mismatch errors.
- BTRFS error (device dm-2): unable to fixup (regular) error at logical 7110656 on dev /dev/mapper/test-scratch1
Showing which tree blocks are corrupted.
- BTRFS warning (device dm-2): checksum/header error at logical 24772608 on dev /dev/mapper/test-scratch2, physical 3801088: metadata node (level 1) in tree 5
Showing which physical range the corrupted metadata is at.
We have to combine the above 3 to know we have a corrupted metadata with
generation mismatch.
And this is already the better case, if we have other problems, like
fsid mismatch, we can not even know the cause.
[CAUSE]
The problem is caused by the fact that, scrub_checksum_tree_block()
never outputs any error message.
It just return two bits for scrub: sblock->header_error, and
sblock->generation_error.
And later we report error in scrub_print_warning(), but unfortunately we
only have two bits, there is not really much thing we can done to print
any detailed errors.
[FIX]
This patch will do the following to enhance the error reporting of
metadata scrub:
- Add extra warning (ratelimited) for every error we hit
This can help us to distinguish the different types of errors.
Some errors can help us to know what's going wrong immediately,
like bytenr mismatch.
- Re-order the checks
Currently we check bytenr first, then immediately generation.
This can lead to false generation mismatch reports, while the fsid
mismatches.
Here is the new output for the bug I'm debugging (we forgot to
writeback tree blocks for commit roots):
BTRFS warning (device dm-2): tree block 24117248 mirror 1 has bad fsid, has b77cd862-f150-4c71-90ec-7baf0544d83f want 17df6abf-23cd-445f-b350-5b3e40bfd2fc
BTRFS warning (device dm-2): tree block 24117248 mirror 0 has bad fsid, has b77cd862-f150-4c71-90ec-7baf0544d83f want 17df6abf-23cd-445f-b350-5b3e40bfd2fc
Now we can immediately know it's some tree blocks didn't even get written
back, other than the original confusing generation mismatch.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/btrfs/scrub.c | 49 +++++++++++++++++++++++++++++++++++++++---------
1 file changed, 40 insertions(+), 9 deletions(-)
diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index 196c4c6ed1ed8..c5d8dc112fd58 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -2036,20 +2036,33 @@ static int scrub_checksum_tree_block(struct scrub_block *sblock)
* a) don't have an extent buffer and
* b) the page is already kmapped
*/
- if (sblock->logical != btrfs_stack_header_bytenr(h))
+ if (sblock->logical != btrfs_stack_header_bytenr(h)) {
sblock->header_error = 1;
-
- if (sector->generation != btrfs_stack_header_generation(h)) {
- sblock->header_error = 1;
- sblock->generation_error = 1;
+ btrfs_warn_rl(fs_info,
+ "tree block %llu mirror %u has bad bytenr, has %llu want %llu",
+ sblock->logical, sblock->mirror_num,
+ btrfs_stack_header_bytenr(h),
+ sblock->logical);
+ goto out;
}
- if (!scrub_check_fsid(h->fsid, sector))
+ if (!scrub_check_fsid(h->fsid, sector)) {
sblock->header_error = 1;
+ btrfs_warn_rl(fs_info,
+ "tree block %llu mirror %u has bad fsid, has %pU want %pU",
+ sblock->logical, sblock->mirror_num,
+ h->fsid, sblock->dev->fs_devices->fsid);
+ goto out;
+ }
- if (memcmp(h->chunk_tree_uuid, fs_info->chunk_tree_uuid,
- BTRFS_UUID_SIZE))
+ if (memcmp(h->chunk_tree_uuid, fs_info->chunk_tree_uuid, BTRFS_UUID_SIZE)) {
sblock->header_error = 1;
+ btrfs_warn_rl(fs_info,
+ "tree block %llu mirror %u has bad chunk tree uuid, has %pU want %pU",
+ sblock->logical, sblock->mirror_num,
+ h->chunk_tree_uuid, fs_info->chunk_tree_uuid);
+ goto out;
+ }
shash->tfm = fs_info->csum_shash;
crypto_shash_init(shash);
@@ -2062,9 +2075,27 @@ static int scrub_checksum_tree_block(struct scrub_block *sblock)
}
crypto_shash_final(shash, calculated_csum);
- if (memcmp(calculated_csum, on_disk_csum, sctx->fs_info->csum_size))
+ if (memcmp(calculated_csum, on_disk_csum, sctx->fs_info->csum_size)) {
sblock->checksum_error = 1;
+ btrfs_warn_rl(fs_info,
+ "tree block %llu mirror %u has bad csum, has " CSUM_FMT " want " CSUM_FMT,
+ sblock->logical, sblock->mirror_num,
+ CSUM_FMT_VALUE(fs_info->csum_size, on_disk_csum),
+ CSUM_FMT_VALUE(fs_info->csum_size, calculated_csum));
+ goto out;
+ }
+
+ if (sector->generation != btrfs_stack_header_generation(h)) {
+ sblock->header_error = 1;
+ sblock->generation_error = 1;
+ btrfs_warn_rl(fs_info,
+ "tree block %llu mirror %u has bad generation, has %llu want %llu",
+ sblock->logical, sblock->mirror_num,
+ btrfs_stack_header_generation(h),
+ sector->generation);
+ }
+out:
return sblock->header_error || sblock->checksum_error;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 539/885] arm64: zynqmp: Enable hs termination flag for USB dwc3 controller
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (537 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 538/885] btrfs: scrub: improve tree block error reporting Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 540/885] cpuidle, intel_idle: Fix CPUIDLE_FLAG_INIT_XSTATE Greg Kroah-Hartman
` (348 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michael Grzeschik, Michal Simek,
Sasha Levin
From: Michael Grzeschik <m.grzeschik@pengutronix.de>
[ Upstream commit 32405e532d358a2f9d4befae928b9883c8597616 ]
Since we need to support legacy phys with the dwc3 controller,
we enable this quirk on the zynqmp platforms.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20221023215649.221726-1-m.grzeschik@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index a549265e55f6e..7c1af75f33a05 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -825,6 +825,7 @@ dwc3_0: usb@fe200000 {
clock-names = "bus_early", "ref";
iommus = <&smmu 0x860>;
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,resume-hs-terminations;
/* dma-coherent; */
};
};
@@ -851,6 +852,7 @@ dwc3_1: usb@fe300000 {
clock-names = "bus_early", "ref";
iommus = <&smmu 0x861>;
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,resume-hs-terminations;
/* dma-coherent; */
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 540/885] cpuidle, intel_idle: Fix CPUIDLE_FLAG_INIT_XSTATE
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (538 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 539/885] arm64: zynqmp: Enable hs termination flag for USB dwc3 controller Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 541/885] x86/fpu: Dont set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads Greg Kroah-Hartman
` (347 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peter Zijlstra (Intel),
Ingo Molnar, Tony Lindgren, Ulf Hansson, Rafael J. Wysocki,
Frederic Weisbecker, Sasha Levin
From: Peter Zijlstra <peterz@infradead.org>
[ Upstream commit 821ad23d0eaff73ef599ece39ecc77482df20a8c ]
Fix instrumentation bugs objtool found:
vmlinux.o: warning: objtool: intel_idle_s2idle+0xd5: call to fpu_idle_fpregs() leaves .noinstr.text section
vmlinux.o: warning: objtool: intel_idle_xstate+0x11: call to fpu_idle_fpregs() leaves .noinstr.text section
vmlinux.o: warning: objtool: fpu_idle_fpregs+0x9: call to xfeatures_in_use() leaves .noinstr.text section
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.494977795@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/include/asm/fpu/xcr.h | 4 ++--
arch/x86/include/asm/special_insns.h | 2 +-
arch/x86/kernel/fpu/core.c | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/x86/include/asm/fpu/xcr.h b/arch/x86/include/asm/fpu/xcr.h
index 9656a5bc6feae..9a710c0604457 100644
--- a/arch/x86/include/asm/fpu/xcr.h
+++ b/arch/x86/include/asm/fpu/xcr.h
@@ -5,7 +5,7 @@
#define XCR_XFEATURE_ENABLED_MASK 0x00000000
#define XCR_XFEATURE_IN_USE_MASK 0x00000001
-static inline u64 xgetbv(u32 index)
+static __always_inline u64 xgetbv(u32 index)
{
u32 eax, edx;
@@ -27,7 +27,7 @@ static inline void xsetbv(u32 index, u64 value)
*
* Callers should check X86_FEATURE_XGETBV1.
*/
-static inline u64 xfeatures_in_use(void)
+static __always_inline u64 xfeatures_in_use(void)
{
return xgetbv(XCR_XFEATURE_IN_USE_MASK);
}
diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index 35f709f619fb4..c2e322189f853 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -295,7 +295,7 @@ static inline int enqcmds(void __iomem *dst, const void *src)
return 0;
}
-static inline void tile_release(void)
+static __always_inline void tile_release(void)
{
/*
* Instruction opcode for TILERELEASE; supported in binutils
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 9baa89a8877d0..dccce58201b7c 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -853,12 +853,12 @@ int fpu__exception_code(struct fpu *fpu, int trap_nr)
* Initialize register state that may prevent from entering low-power idle.
* This function will be invoked from the cpuidle driver only when needed.
*/
-void fpu_idle_fpregs(void)
+noinstr void fpu_idle_fpregs(void)
{
/* Note: AMX_TILE being enabled implies XGETBV1 support */
if (cpu_feature_enabled(X86_FEATURE_AMX_TILE) &&
(xfeatures_in_use() & XFEATURE_MASK_XTILE)) {
tile_release();
- fpregs_deactivate(¤t->thread.fpu);
+ __this_cpu_write(fpu_fpregs_owner_ctx, NULL);
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 541/885] x86/fpu: Dont set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (539 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 540/885] cpuidle, intel_idle: Fix CPUIDLE_FLAG_INIT_XSTATE Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 542/885] cpuidle: drivers: firmware: psci: Dont instrument suspend code Greg Kroah-Hartman
` (346 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jens Axboe, Ingo Molnar,
Peter Zijlstra, Sasha Levin
From: Jens Axboe <axboe@kernel.dk>
[ Upstream commit cb3ea4b7671b7cfbac3ee609976b790aebd0bbda ]
We don't set it on PF_KTHREAD threads as they never return to userspace,
and PF_IO_WORKER threads are identical in that regard. As they keep
running in the kernel until they die, skip setting the FPU flag on them.
More of a cosmetic thing that was found while debugging and
issue and pondering why the FPU flag is set on these threads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/560c844c-f128-555b-40c6-31baff27537f@kernel.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/include/asm/fpu/sched.h | 2 +-
arch/x86/kernel/fpu/context.h | 2 +-
arch/x86/kernel/fpu/core.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/include/asm/fpu/sched.h b/arch/x86/include/asm/fpu/sched.h
index b2486b2cbc6e0..c2d6cd78ed0c2 100644
--- a/arch/x86/include/asm/fpu/sched.h
+++ b/arch/x86/include/asm/fpu/sched.h
@@ -39,7 +39,7 @@ extern void fpu_flush_thread(void);
static inline void switch_fpu_prepare(struct fpu *old_fpu, int cpu)
{
if (cpu_feature_enabled(X86_FEATURE_FPU) &&
- !(current->flags & PF_KTHREAD)) {
+ !(current->flags & (PF_KTHREAD | PF_IO_WORKER))) {
save_fpregs_to_fpstate(old_fpu);
/*
* The save operation preserved register state, so the
diff --git a/arch/x86/kernel/fpu/context.h b/arch/x86/kernel/fpu/context.h
index 958accf2ccf07..9fcfa5c4dad79 100644
--- a/arch/x86/kernel/fpu/context.h
+++ b/arch/x86/kernel/fpu/context.h
@@ -57,7 +57,7 @@ static inline void fpregs_restore_userregs(void)
struct fpu *fpu = ¤t->thread.fpu;
int cpu = smp_processor_id();
- if (WARN_ON_ONCE(current->flags & PF_KTHREAD))
+ if (WARN_ON_ONCE(current->flags & (PF_KTHREAD | PF_IO_WORKER)))
return;
if (!fpregs_state_valid(fpu, cpu)) {
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index dccce58201b7c..caf33486dc5ee 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -426,7 +426,7 @@ void kernel_fpu_begin_mask(unsigned int kfpu_mask)
this_cpu_write(in_kernel_fpu, true);
- if (!(current->flags & PF_KTHREAD) &&
+ if (!(current->flags & (PF_KTHREAD | PF_IO_WORKER)) &&
!test_thread_flag(TIF_NEED_FPU_LOAD)) {
set_thread_flag(TIF_NEED_FPU_LOAD);
save_fpregs_to_fpstate(¤t->thread.fpu);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 542/885] cpuidle: drivers: firmware: psci: Dont instrument suspend code
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (540 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 541/885] x86/fpu: Dont set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 543/885] cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG Greg Kroah-Hartman
` (345 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mark Rutland, Peter Zijlstra (Intel),
Ingo Molnar, Sasha Levin
From: Mark Rutland <mark.rutland@arm.com>
[ Upstream commit 393e2ea30aec634b37004d401863428e120d5e1b ]
The PSCI suspend code is currently instrumentable, which is not safe as
instrumentation (e.g. ftrace) may try to make use of RCU during idle
periods when RCU is not watching.
To fix this we need to ensure that psci_suspend_finisher() and anything
it calls are not instrumented. We can do this fairly simply by marking
psci_suspend_finisher() and the psci*_cpu_suspend() functions as
noinstr, and the underlying helper functions as __always_inline.
When CONFIG_DEBUG_VIRTUAL=y, __pa_symbol() can expand to an out-of-line
instrumented function, so we must use __pa_symbol_nodebug() within
psci_suspend_finisher().
The raw SMCCC invocation functions are written in assembly, and are not
subject to compiler instrumentation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126151323.349423061@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/psci/psci.c | 31 +++++++++++++++++++------------
1 file changed, 19 insertions(+), 12 deletions(-)
diff --git a/drivers/firmware/psci/psci.c b/drivers/firmware/psci/psci.c
index 447ee4ea5c903..f78249fe2512a 100644
--- a/drivers/firmware/psci/psci.c
+++ b/drivers/firmware/psci/psci.c
@@ -108,9 +108,10 @@ bool psci_power_state_is_valid(u32 state)
return !(state & ~valid_mask);
}
-static unsigned long __invoke_psci_fn_hvc(unsigned long function_id,
- unsigned long arg0, unsigned long arg1,
- unsigned long arg2)
+static __always_inline unsigned long
+__invoke_psci_fn_hvc(unsigned long function_id,
+ unsigned long arg0, unsigned long arg1,
+ unsigned long arg2)
{
struct arm_smccc_res res;
@@ -118,9 +119,10 @@ static unsigned long __invoke_psci_fn_hvc(unsigned long function_id,
return res.a0;
}
-static unsigned long __invoke_psci_fn_smc(unsigned long function_id,
- unsigned long arg0, unsigned long arg1,
- unsigned long arg2)
+static __always_inline unsigned long
+__invoke_psci_fn_smc(unsigned long function_id,
+ unsigned long arg0, unsigned long arg1,
+ unsigned long arg2)
{
struct arm_smccc_res res;
@@ -128,7 +130,7 @@ static unsigned long __invoke_psci_fn_smc(unsigned long function_id,
return res.a0;
}
-static int psci_to_linux_errno(int errno)
+static __always_inline int psci_to_linux_errno(int errno)
{
switch (errno) {
case PSCI_RET_SUCCESS:
@@ -169,7 +171,8 @@ int psci_set_osi_mode(bool enable)
return psci_to_linux_errno(err);
}
-static int __psci_cpu_suspend(u32 fn, u32 state, unsigned long entry_point)
+static __always_inline int
+__psci_cpu_suspend(u32 fn, u32 state, unsigned long entry_point)
{
int err;
@@ -177,13 +180,15 @@ static int __psci_cpu_suspend(u32 fn, u32 state, unsigned long entry_point)
return psci_to_linux_errno(err);
}
-static int psci_0_1_cpu_suspend(u32 state, unsigned long entry_point)
+static __always_inline int
+psci_0_1_cpu_suspend(u32 state, unsigned long entry_point)
{
return __psci_cpu_suspend(psci_0_1_function_ids.cpu_suspend,
state, entry_point);
}
-static int psci_0_2_cpu_suspend(u32 state, unsigned long entry_point)
+static __always_inline int
+psci_0_2_cpu_suspend(u32 state, unsigned long entry_point)
{
return __psci_cpu_suspend(PSCI_FN_NATIVE(0_2, CPU_SUSPEND),
state, entry_point);
@@ -450,10 +455,12 @@ late_initcall(psci_debugfs_init)
#endif
#ifdef CONFIG_CPU_IDLE
-static int psci_suspend_finisher(unsigned long state)
+static noinstr int psci_suspend_finisher(unsigned long state)
{
u32 power_state = state;
- phys_addr_t pa_cpu_resume = __pa_symbol(cpu_resume);
+ phys_addr_t pa_cpu_resume;
+
+ pa_cpu_resume = __pa_symbol_nodebug((unsigned long)cpu_resume);
return psci_ops.cpu_suspend(power_state, pa_cpu_resume);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 543/885] cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (541 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 542/885] cpuidle: drivers: firmware: psci: Dont instrument suspend code Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 544/885] perf/x86/intel/uncore: Add Meteor Lake support Greg Kroah-Hartman
` (344 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peter Zijlstra (Intel),
Ingo Molnar, Sasha Levin
From: Peter Zijlstra <peterz@infradead.org>
[ Upstream commit 5a5d7e9badd2cb8065db171961bd30bd3595e4b6 ]
In order to avoid WARN/BUG from generating nested or even recursive
warnings, force rcu_is_watching() true during
WARN/lockdep_rcu_suspicious().
Notably things like unwinding the stack can trigger rcu_dereference()
warnings, which then triggers more unwinding which then triggers more
warnings etc..
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126151323.408156109@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/context_tracking.h | 27 +++++++++++++++++++++++++++
kernel/locking/lockdep.c | 3 +++
kernel/panic.c | 5 +++++
lib/bug.c | 15 ++++++++++++++-
4 files changed, 49 insertions(+), 1 deletion(-)
diff --git a/include/linux/context_tracking.h b/include/linux/context_tracking.h
index dcef4a9e4d63e..d4afa8508a806 100644
--- a/include/linux/context_tracking.h
+++ b/include/linux/context_tracking.h
@@ -130,9 +130,36 @@ static __always_inline unsigned long ct_state_inc(int incby)
return arch_atomic_add_return(incby, this_cpu_ptr(&context_tracking.state));
}
+static __always_inline bool warn_rcu_enter(void)
+{
+ bool ret = false;
+
+ /*
+ * Horrible hack to shut up recursive RCU isn't watching fail since
+ * lots of the actual reporting also relies on RCU.
+ */
+ preempt_disable_notrace();
+ if (rcu_dynticks_curr_cpu_in_eqs()) {
+ ret = true;
+ ct_state_inc(RCU_DYNTICKS_IDX);
+ }
+
+ return ret;
+}
+
+static __always_inline void warn_rcu_exit(bool rcu)
+{
+ if (rcu)
+ ct_state_inc(RCU_DYNTICKS_IDX);
+ preempt_enable_notrace();
+}
+
#else
static inline void ct_idle_enter(void) { }
static inline void ct_idle_exit(void) { }
+
+static __always_inline bool warn_rcu_enter(void) { return false; }
+static __always_inline void warn_rcu_exit(bool rcu) { }
#endif /* !CONFIG_CONTEXT_TRACKING_IDLE */
#endif
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index e3375bc40dadc..50d4863974e7a 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -55,6 +55,7 @@
#include <linux/rcupdate.h>
#include <linux/kprobes.h>
#include <linux/lockdep.h>
+#include <linux/context_tracking.h>
#include <asm/sections.h>
@@ -6555,6 +6556,7 @@ void lockdep_rcu_suspicious(const char *file, const int line, const char *s)
{
struct task_struct *curr = current;
int dl = READ_ONCE(debug_locks);
+ bool rcu = warn_rcu_enter();
/* Note: the following can be executed concurrently, so be careful. */
pr_warn("\n");
@@ -6595,5 +6597,6 @@ void lockdep_rcu_suspicious(const char *file, const int line, const char *s)
lockdep_print_held_locks(curr);
pr_warn("\nstack backtrace:\n");
dump_stack();
+ warn_rcu_exit(rcu);
}
EXPORT_SYMBOL_GPL(lockdep_rcu_suspicious);
diff --git a/kernel/panic.c b/kernel/panic.c
index 7834c9854e026..5864f356ee576 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -33,6 +33,7 @@
#include <linux/ratelimit.h>
#include <linux/debugfs.h>
#include <linux/sysfs.h>
+#include <linux/context_tracking.h>
#include <trace/events/error_report.h>
#include <asm/sections.h>
@@ -678,6 +679,7 @@ void __warn(const char *file, int line, void *caller, unsigned taint,
void warn_slowpath_fmt(const char *file, int line, unsigned taint,
const char *fmt, ...)
{
+ bool rcu = warn_rcu_enter();
struct warn_args args;
pr_warn(CUT_HERE);
@@ -692,11 +694,13 @@ void warn_slowpath_fmt(const char *file, int line, unsigned taint,
va_start(args.args, fmt);
__warn(file, line, __builtin_return_address(0), taint, NULL, &args);
va_end(args.args);
+ warn_rcu_exit(rcu);
}
EXPORT_SYMBOL(warn_slowpath_fmt);
#else
void __warn_printk(const char *fmt, ...)
{
+ bool rcu = warn_rcu_enter();
va_list args;
pr_warn(CUT_HERE);
@@ -704,6 +708,7 @@ void __warn_printk(const char *fmt, ...)
va_start(args, fmt);
vprintk(fmt, args);
va_end(args);
+ warn_rcu_exit(rcu);
}
EXPORT_SYMBOL(__warn_printk);
#endif
diff --git a/lib/bug.c b/lib/bug.c
index c223a2575b721..e0ff219899902 100644
--- a/lib/bug.c
+++ b/lib/bug.c
@@ -47,6 +47,7 @@
#include <linux/sched.h>
#include <linux/rculist.h>
#include <linux/ftrace.h>
+#include <linux/context_tracking.h>
extern struct bug_entry __start___bug_table[], __stop___bug_table[];
@@ -153,7 +154,7 @@ struct bug_entry *find_bug(unsigned long bugaddr)
return module_find_bug(bugaddr);
}
-enum bug_trap_type report_bug(unsigned long bugaddr, struct pt_regs *regs)
+static enum bug_trap_type __report_bug(unsigned long bugaddr, struct pt_regs *regs)
{
struct bug_entry *bug;
const char *file;
@@ -209,6 +210,18 @@ enum bug_trap_type report_bug(unsigned long bugaddr, struct pt_regs *regs)
return BUG_TRAP_TYPE_BUG;
}
+enum bug_trap_type report_bug(unsigned long bugaddr, struct pt_regs *regs)
+{
+ enum bug_trap_type ret;
+ bool rcu = false;
+
+ rcu = warn_rcu_enter();
+ ret = __report_bug(bugaddr, regs);
+ warn_rcu_exit(rcu);
+
+ return ret;
+}
+
static void clear_once_table(struct bug_entry *start, struct bug_entry *end)
{
struct bug_entry *bug;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 544/885] perf/x86/intel/uncore: Add Meteor Lake support
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (542 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 543/885] cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 545/885] wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect() Greg Kroah-Hartman
` (343 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Kan Liang, Ingo Molnar, Sasha Levin
From: Kan Liang <kan.liang@linux.intel.com>
[ Upstream commit c828441f21ddc819a28b5723a72e3c840e9de1c6 ]
The uncore subsystem for Meteor Lake is similar to the previous Alder
Lake. The main difference is that MTL provides PMU support for different
tiles, while ADL only provides PMU support for the whole package. On
ADL, there are CBOX, ARB, and clockbox uncore PMON units. On MTL, they
are split into CBOX/HAC_CBOX, ARB/HAC_ARB, and cncu/sncu which provides
a fixed counter for clockticks. Also, new MSR addresses are introduced
on MTL.
The IMC uncore PMON is the same as Alder Lake. Add new PCIIDs of IMC for
Meteor Lake.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230210190238.1726237-1-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/intel/uncore.c | 7 ++
arch/x86/events/intel/uncore.h | 1 +
arch/x86/events/intel/uncore_snb.c | 161 +++++++++++++++++++++++++++++
3 files changed, 169 insertions(+)
diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c
index 459b1aafd4d4a..27b34f5b87600 100644
--- a/arch/x86/events/intel/uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -1765,6 +1765,11 @@ static const struct intel_uncore_init_fun adl_uncore_init __initconst = {
.mmio_init = adl_uncore_mmio_init,
};
+static const struct intel_uncore_init_fun mtl_uncore_init __initconst = {
+ .cpu_init = mtl_uncore_cpu_init,
+ .mmio_init = adl_uncore_mmio_init,
+};
+
static const struct intel_uncore_init_fun icx_uncore_init __initconst = {
.cpu_init = icx_uncore_cpu_init,
.pci_init = icx_uncore_pci_init,
@@ -1832,6 +1837,8 @@ static const struct x86_cpu_id intel_uncore_match[] __initconst = {
X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE, &adl_uncore_init),
X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_P, &adl_uncore_init),
X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_S, &adl_uncore_init),
+ X86_MATCH_INTEL_FAM6_MODEL(METEORLAKE, &mtl_uncore_init),
+ X86_MATCH_INTEL_FAM6_MODEL(METEORLAKE_L, &mtl_uncore_init),
X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, &spr_uncore_init),
X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X, &spr_uncore_init),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D, &snr_uncore_init),
diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h
index b363fddc2a89e..b74e352910f45 100644
--- a/arch/x86/events/intel/uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -587,6 +587,7 @@ void skl_uncore_cpu_init(void);
void icl_uncore_cpu_init(void);
void tgl_uncore_cpu_init(void);
void adl_uncore_cpu_init(void);
+void mtl_uncore_cpu_init(void);
void tgl_uncore_mmio_init(void);
void tgl_l_uncore_mmio_init(void);
void adl_uncore_mmio_init(void);
diff --git a/arch/x86/events/intel/uncore_snb.c b/arch/x86/events/intel/uncore_snb.c
index 1f4869227efb9..7fd4334e12a17 100644
--- a/arch/x86/events/intel/uncore_snb.c
+++ b/arch/x86/events/intel/uncore_snb.c
@@ -109,6 +109,19 @@
#define PCI_DEVICE_ID_INTEL_RPL_23_IMC 0xA728
#define PCI_DEVICE_ID_INTEL_RPL_24_IMC 0xA729
#define PCI_DEVICE_ID_INTEL_RPL_25_IMC 0xA72A
+#define PCI_DEVICE_ID_INTEL_MTL_1_IMC 0x7d00
+#define PCI_DEVICE_ID_INTEL_MTL_2_IMC 0x7d01
+#define PCI_DEVICE_ID_INTEL_MTL_3_IMC 0x7d02
+#define PCI_DEVICE_ID_INTEL_MTL_4_IMC 0x7d05
+#define PCI_DEVICE_ID_INTEL_MTL_5_IMC 0x7d10
+#define PCI_DEVICE_ID_INTEL_MTL_6_IMC 0x7d14
+#define PCI_DEVICE_ID_INTEL_MTL_7_IMC 0x7d15
+#define PCI_DEVICE_ID_INTEL_MTL_8_IMC 0x7d16
+#define PCI_DEVICE_ID_INTEL_MTL_9_IMC 0x7d21
+#define PCI_DEVICE_ID_INTEL_MTL_10_IMC 0x7d22
+#define PCI_DEVICE_ID_INTEL_MTL_11_IMC 0x7d23
+#define PCI_DEVICE_ID_INTEL_MTL_12_IMC 0x7d24
+#define PCI_DEVICE_ID_INTEL_MTL_13_IMC 0x7d28
#define IMC_UNCORE_DEV(a) \
@@ -205,6 +218,32 @@
#define ADL_UNC_ARB_PERFEVTSEL0 0x2FD0
#define ADL_UNC_ARB_MSR_OFFSET 0x8
+/* MTL Cbo register */
+#define MTL_UNC_CBO_0_PER_CTR0 0x2448
+#define MTL_UNC_CBO_0_PERFEVTSEL0 0x2442
+
+/* MTL HAC_ARB register */
+#define MTL_UNC_HAC_ARB_CTR 0x2018
+#define MTL_UNC_HAC_ARB_CTRL 0x2012
+
+/* MTL ARB register */
+#define MTL_UNC_ARB_CTR 0x2418
+#define MTL_UNC_ARB_CTRL 0x2412
+
+/* MTL cNCU register */
+#define MTL_UNC_CNCU_FIXED_CTR 0x2408
+#define MTL_UNC_CNCU_FIXED_CTRL 0x2402
+#define MTL_UNC_CNCU_BOX_CTL 0x240e
+
+/* MTL sNCU register */
+#define MTL_UNC_SNCU_FIXED_CTR 0x2008
+#define MTL_UNC_SNCU_FIXED_CTRL 0x2002
+#define MTL_UNC_SNCU_BOX_CTL 0x200e
+
+/* MTL HAC_CBO register */
+#define MTL_UNC_HBO_CTR 0x2048
+#define MTL_UNC_HBO_CTRL 0x2042
+
DEFINE_UNCORE_FORMAT_ATTR(event, event, "config:0-7");
DEFINE_UNCORE_FORMAT_ATTR(umask, umask, "config:8-15");
DEFINE_UNCORE_FORMAT_ATTR(chmask, chmask, "config:8-11");
@@ -598,6 +637,115 @@ void adl_uncore_cpu_init(void)
uncore_msr_uncores = adl_msr_uncores;
}
+static struct intel_uncore_type mtl_uncore_cbox = {
+ .name = "cbox",
+ .num_counters = 2,
+ .perf_ctr_bits = 48,
+ .perf_ctr = MTL_UNC_CBO_0_PER_CTR0,
+ .event_ctl = MTL_UNC_CBO_0_PERFEVTSEL0,
+ .event_mask = ADL_UNC_RAW_EVENT_MASK,
+ .msr_offset = SNB_UNC_CBO_MSR_OFFSET,
+ .ops = &icl_uncore_msr_ops,
+ .format_group = &adl_uncore_format_group,
+};
+
+static struct intel_uncore_type mtl_uncore_hac_arb = {
+ .name = "hac_arb",
+ .num_counters = 2,
+ .num_boxes = 2,
+ .perf_ctr_bits = 48,
+ .perf_ctr = MTL_UNC_HAC_ARB_CTR,
+ .event_ctl = MTL_UNC_HAC_ARB_CTRL,
+ .event_mask = ADL_UNC_RAW_EVENT_MASK,
+ .msr_offset = SNB_UNC_CBO_MSR_OFFSET,
+ .ops = &icl_uncore_msr_ops,
+ .format_group = &adl_uncore_format_group,
+};
+
+static struct intel_uncore_type mtl_uncore_arb = {
+ .name = "arb",
+ .num_counters = 2,
+ .num_boxes = 2,
+ .perf_ctr_bits = 48,
+ .perf_ctr = MTL_UNC_ARB_CTR,
+ .event_ctl = MTL_UNC_ARB_CTRL,
+ .event_mask = ADL_UNC_RAW_EVENT_MASK,
+ .msr_offset = SNB_UNC_CBO_MSR_OFFSET,
+ .ops = &icl_uncore_msr_ops,
+ .format_group = &adl_uncore_format_group,
+};
+
+static struct intel_uncore_type mtl_uncore_hac_cbox = {
+ .name = "hac_cbox",
+ .num_counters = 2,
+ .num_boxes = 2,
+ .perf_ctr_bits = 48,
+ .perf_ctr = MTL_UNC_HBO_CTR,
+ .event_ctl = MTL_UNC_HBO_CTRL,
+ .event_mask = ADL_UNC_RAW_EVENT_MASK,
+ .msr_offset = SNB_UNC_CBO_MSR_OFFSET,
+ .ops = &icl_uncore_msr_ops,
+ .format_group = &adl_uncore_format_group,
+};
+
+static void mtl_uncore_msr_init_box(struct intel_uncore_box *box)
+{
+ wrmsrl(uncore_msr_box_ctl(box), SNB_UNC_GLOBAL_CTL_EN);
+}
+
+static struct intel_uncore_ops mtl_uncore_msr_ops = {
+ .init_box = mtl_uncore_msr_init_box,
+ .disable_event = snb_uncore_msr_disable_event,
+ .enable_event = snb_uncore_msr_enable_event,
+ .read_counter = uncore_msr_read_counter,
+};
+
+static struct intel_uncore_type mtl_uncore_cncu = {
+ .name = "cncu",
+ .num_counters = 1,
+ .num_boxes = 1,
+ .box_ctl = MTL_UNC_CNCU_BOX_CTL,
+ .fixed_ctr_bits = 48,
+ .fixed_ctr = MTL_UNC_CNCU_FIXED_CTR,
+ .fixed_ctl = MTL_UNC_CNCU_FIXED_CTRL,
+ .single_fixed = 1,
+ .event_mask = SNB_UNC_CTL_EV_SEL_MASK,
+ .format_group = &icl_uncore_clock_format_group,
+ .ops = &mtl_uncore_msr_ops,
+ .event_descs = icl_uncore_events,
+};
+
+static struct intel_uncore_type mtl_uncore_sncu = {
+ .name = "sncu",
+ .num_counters = 1,
+ .num_boxes = 1,
+ .box_ctl = MTL_UNC_SNCU_BOX_CTL,
+ .fixed_ctr_bits = 48,
+ .fixed_ctr = MTL_UNC_SNCU_FIXED_CTR,
+ .fixed_ctl = MTL_UNC_SNCU_FIXED_CTRL,
+ .single_fixed = 1,
+ .event_mask = SNB_UNC_CTL_EV_SEL_MASK,
+ .format_group = &icl_uncore_clock_format_group,
+ .ops = &mtl_uncore_msr_ops,
+ .event_descs = icl_uncore_events,
+};
+
+static struct intel_uncore_type *mtl_msr_uncores[] = {
+ &mtl_uncore_cbox,
+ &mtl_uncore_hac_arb,
+ &mtl_uncore_arb,
+ &mtl_uncore_hac_cbox,
+ &mtl_uncore_cncu,
+ &mtl_uncore_sncu,
+ NULL
+};
+
+void mtl_uncore_cpu_init(void)
+{
+ mtl_uncore_cbox.num_boxes = icl_get_cbox_num();
+ uncore_msr_uncores = mtl_msr_uncores;
+}
+
enum {
SNB_PCI_UNCORE_IMC,
};
@@ -1264,6 +1412,19 @@ static const struct pci_device_id tgl_uncore_pci_ids[] = {
IMC_UNCORE_DEV(RPL_23),
IMC_UNCORE_DEV(RPL_24),
IMC_UNCORE_DEV(RPL_25),
+ IMC_UNCORE_DEV(MTL_1),
+ IMC_UNCORE_DEV(MTL_2),
+ IMC_UNCORE_DEV(MTL_3),
+ IMC_UNCORE_DEV(MTL_4),
+ IMC_UNCORE_DEV(MTL_5),
+ IMC_UNCORE_DEV(MTL_6),
+ IMC_UNCORE_DEV(MTL_7),
+ IMC_UNCORE_DEV(MTL_8),
+ IMC_UNCORE_DEV(MTL_9),
+ IMC_UNCORE_DEV(MTL_10),
+ IMC_UNCORE_DEV(MTL_11),
+ IMC_UNCORE_DEV(MTL_12),
+ IMC_UNCORE_DEV(MTL_13),
{ /* end: all zeroes */ }
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 545/885] wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (543 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 544/885] perf/x86/intel/uncore: Add Meteor Lake support Greg Kroah-Hartman
@ 2023-03-07 16:57 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 546/885] wifi: ath11k: fix monitor mode bringup crash Greg Kroah-Hartman
` (342 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:57 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dokyung Song, Jisoo Jang,
Minsuk Kang, Toke Høiland-Jørgensen, Kalle Valo,
Sasha Levin
From: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
[ Upstream commit f099c5c9e2ba08a379bd354a82e05ef839ae29ac ]
This patch fixes a use-after-free in ath9k that occurs in
ath9k_hif_usb_disconnect() when ath9k_destroy_wmi() is trying to access
'drv_priv' that has already been freed by ieee80211_free_hw(), called by
ath9k_htc_hw_deinit(). The patch moves ath9k_destroy_wmi() before
ieee80211_free_hw(). Note that urbs from the driver should be killed
before freeing 'wmi' with ath9k_destroy_wmi() as their callbacks will
access 'wmi'.
Found by a modified version of syzkaller.
==================================================================
BUG: KASAN: use-after-free in ath9k_destroy_wmi+0x38/0x40
Read of size 8 at addr ffff8881069132a0 by task kworker/0:1/7
CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G O 5.14.0+ #131
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack_lvl+0x8e/0xd1
print_address_description.constprop.0.cold+0x93/0x334
? ath9k_destroy_wmi+0x38/0x40
? ath9k_destroy_wmi+0x38/0x40
kasan_report.cold+0x83/0xdf
? ath9k_destroy_wmi+0x38/0x40
ath9k_destroy_wmi+0x38/0x40
ath9k_hif_usb_disconnect+0x329/0x3f0
? ath9k_hif_usb_suspend+0x120/0x120
? usb_disable_interface+0xfc/0x180
usb_unbind_interface+0x19b/0x7e0
? usb_autoresume_device+0x50/0x50
device_release_driver_internal+0x44d/0x520
bus_remove_device+0x2e5/0x5a0
device_del+0x5b2/0xe30
? __device_link_del+0x370/0x370
? usb_remove_ep_devs+0x43/0x80
? remove_intf_ep_devs+0x112/0x1a0
usb_disable_device+0x1e3/0x5a0
usb_disconnect+0x267/0x870
hub_event+0x168d/0x3950
? rcu_read_lock_sched_held+0xa1/0xd0
? hub_port_debounce+0x2e0/0x2e0
? check_irq_usage+0x860/0xf20
? drain_workqueue+0x281/0x360
? lock_release+0x640/0x640
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
process_one_work+0x92b/0x1460
? pwq_dec_nr_in_flight+0x330/0x330
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x95/0xe00
? __kthread_parkme+0x115/0x1e0
? process_one_work+0x1460/0x1460
kthread+0x3a1/0x480
? set_kthread_struct+0x120/0x120
ret_from_fork+0x1f/0x30
The buggy address belongs to the page:
page:ffffea00041a44c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x106913
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), pid 7, ts 38347963444, free_ts 41399957635
prep_new_page+0x1aa/0x240
get_page_from_freelist+0x159a/0x27c0
__alloc_pages+0x2da/0x6a0
alloc_pages+0xec/0x1e0
kmalloc_order+0x39/0xf0
kmalloc_order_trace+0x19/0x120
__kmalloc+0x308/0x390
wiphy_new_nm+0x6f5/0x1dd0
ieee80211_alloc_hw_nm+0x36d/0x2230
ath9k_htc_probe_device+0x9d/0x1e10
ath9k_htc_hw_init+0x34/0x50
ath9k_hif_usb_firmware_cb+0x25f/0x4e0
request_firmware_work_func+0x131/0x240
process_one_work+0x92b/0x1460
worker_thread+0x95/0xe00
kthread+0x3a1/0x480
page last free stack trace:
free_pcp_prepare+0x3d3/0x7f0
free_unref_page+0x1e/0x3d0
device_release+0xa4/0x240
kobject_put+0x186/0x4c0
put_device+0x20/0x30
ath9k_htc_disconnect_device+0x1cf/0x2c0
ath9k_htc_hw_deinit+0x26/0x30
ath9k_hif_usb_disconnect+0x2d9/0x3f0
usb_unbind_interface+0x19b/0x7e0
device_release_driver_internal+0x44d/0x520
bus_remove_device+0x2e5/0x5a0
device_del+0x5b2/0xe30
usb_disable_device+0x1e3/0x5a0
usb_disconnect+0x267/0x870
hub_event+0x168d/0x3950
process_one_work+0x92b/0x1460
Memory state around the buggy address:
ffff888106913180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888106913200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888106913280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888106913300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888106913380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221205014308.1617597-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 2 --
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 2 ++
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index de6c0824c9cab..f521dfa2f1945 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1424,8 +1424,6 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface)
if (hif_dev->flags & HIF_USB_READY) {
ath9k_htc_hw_deinit(hif_dev->htc_handle, unplugged);
- ath9k_hif_usb_dev_deinit(hif_dev);
- ath9k_destroy_wmi(hif_dev->htc_handle->drv_priv);
ath9k_htc_hw_free(hif_dev->htc_handle);
}
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 07ac88fb1c577..96a3185a96d75 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -988,6 +988,8 @@ void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug)
ath9k_deinit_device(htc_handle->drv_priv);
ath9k_stop_wmi(htc_handle->drv_priv);
+ ath9k_hif_usb_dealloc_urbs((struct hif_device_usb *)htc_handle->hif_dev);
+ ath9k_destroy_wmi(htc_handle->drv_priv);
ieee80211_free_hw(htc_handle->drv_priv->hw);
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 546/885] wifi: ath11k: fix monitor mode bringup crash
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (544 preceding siblings ...)
2023-03-07 16:57 ` [PATCH 6.1 545/885] wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect() Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 547/885] wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds() Greg Kroah-Hartman
` (341 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Florian Schmidt, Nagarajan Maran,
Kalle Valo, Sasha Levin
From: Nagarajan Maran <quic_nmaran@quicinc.com>
[ Upstream commit 950b43f8bd8a4d476d2da6d2a083a89bcd3c90d7 ]
When the interface is brought up in monitor mode, it leads
to NULL pointer dereference crash. This crash happens when
the packet type is extracted for a SKB. This extraction
which is present in the received msdu delivery path,is
not needed for the monitor ring packets since they are
all RAW packets. Hence appending the flags with
"RX_FLAG_ONLY_MONITOR" to skip that extraction.
Observed calltrace:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000064
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048517000
[0000000000000064] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in: ath11k_pci ath11k qmi_helpers
CPU: 2 PID: 1781 Comm: napi/-271 Not tainted
6.1.0-rc5-wt-ath-656295-gef907406320c-dirty #6
Hardware name: Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k]
lr : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x5c/0x60 [ath11k]
sp : ffff80000ef5bb10
x29: ffff80000ef5bb10 x28: 0000000000000000 x27: ffff000007baafa0
x26: ffff000014a91ed0 x25: 0000000000000000 x24: 0000000000000000
x23: ffff800002b77378 x22: ffff000014a91ec0 x21: ffff000006c8d600
x20: 0000000000000000 x19: ffff800002b77740 x18: 0000000000000006
x17: 736564203634343a x16: 656e694c20657079 x15: 0000000000000143
x14: 00000000ffffffea x13: ffff80000ef5b8b8 x12: ffff80000ef5b8c8
x11: ffff80000a591d30 x10: ffff80000a579d40 x9 : c0000000ffffefff
x8 : 0000000000000003 x7 : 0000000000017fe8 x6 : ffff80000a579ce8
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 3a35ec12ed7f8900 x1 : 0000000000000000 x0 : 0000000000000052
Call trace:
ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k]
ath11k_dp_rx_deliver_msdu.isra.42+0xa4/0x3d0 [ath11k]
ath11k_dp_rx_mon_deliver.isra.43+0x2f8/0x458 [ath11k]
ath11k_dp_rx_process_mon_rings+0x310/0x4c0 [ath11k]
ath11k_dp_service_srng+0x234/0x338 [ath11k]
ath11k_pcic_ext_grp_napi_poll+0x30/0xb8 [ath11k]
__napi_poll+0x5c/0x190
napi_threaded_poll+0xf0/0x118
kthread+0xf4/0x110
ret_from_fork+0x10/0x20
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Reported-by: Florian Schmidt <florian@fls.name>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216573
Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221129142532.23421-1-quic_nmaran@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath11k/dp_rx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index 0c53d88293eb7..e964e1b722871 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -5023,6 +5023,7 @@ static int ath11k_dp_rx_mon_deliver(struct ath11k *ar, u32 mac_id,
} else {
rxs->flag |= RX_FLAG_ALLOW_SAME_PN;
}
+ rxs->flag |= RX_FLAG_ONLY_MONITOR;
ath11k_update_radiotap(ar, ppduinfo, mon_skb, rxs);
ath11k_dp_rx_deliver_msdu(ar, napi, mon_skb, rxs);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 547/885] wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (545 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 546/885] wifi: ath11k: fix monitor mode bringup crash Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 548/885] rcu: Make RCU_LOCKDEP_WARN() avoid early lockdep checks Greg Kroah-Hartman
` (340 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dokyung Song, Jisoo Jang,
Minsuk Kang, Kalle Valo, Sasha Levin
From: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
[ Upstream commit 0a06cadcc2a0044e4a117cc0e61436fc3a0dad69 ]
This patch fixes a stack-out-of-bounds read in brcmfmac that occurs
when 'buf' that is not null-terminated is passed as an argument of
strsep() in brcmf_c_preinit_dcmds(). This buffer is filled with a firmware
version string by memcpy() in brcmf_fil_iovar_data_get().
The patch ensures buf is null-terminated.
Found by a modified version of syzkaller.
[ 47.569679][ T1897] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43236b for chip BCM43236/3
[ 47.582839][ T1897] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 47.601565][ T1897] ==================================================================
[ 47.602574][ T1897] BUG: KASAN: stack-out-of-bounds in strsep+0x1b2/0x1f0
[ 47.603447][ T1897] Read of size 1 at addr ffffc90001f6f000 by task kworker/0:2/1897
[ 47.604336][ T1897]
[ 47.604621][ T1897] CPU: 0 PID: 1897 Comm: kworker/0:2 Tainted: G O 5.14.0+ #131
[ 47.605617][ T1897] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 47.606907][ T1897] Workqueue: usb_hub_wq hub_event
[ 47.607453][ T1897] Call Trace:
[ 47.607801][ T1897] dump_stack_lvl+0x8e/0xd1
[ 47.608295][ T1897] print_address_description.constprop.0.cold+0xf/0x334
[ 47.609009][ T1897] ? strsep+0x1b2/0x1f0
[ 47.609434][ T1897] ? strsep+0x1b2/0x1f0
[ 47.609863][ T1897] kasan_report.cold+0x83/0xdf
[ 47.610366][ T1897] ? strsep+0x1b2/0x1f0
[ 47.610882][ T1897] strsep+0x1b2/0x1f0
[ 47.611300][ T1897] ? brcmf_fil_iovar_data_get+0x3a/0xf0
[ 47.611883][ T1897] brcmf_c_preinit_dcmds+0x995/0xc40
[ 47.612434][ T1897] ? brcmf_c_set_joinpref_default+0x100/0x100
[ 47.613078][ T1897] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 47.613662][ T1897] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 47.614208][ T1897] ? lock_acquire+0x19d/0x4e0
[ 47.614704][ T1897] ? find_held_lock+0x2d/0x110
[ 47.615236][ T1897] ? brcmf_usb_deq+0x1a7/0x260
[ 47.615741][ T1897] ? brcmf_usb_rx_fill_all+0x5a/0xf0
[ 47.616288][ T1897] brcmf_attach+0x246/0xd40
[ 47.616758][ T1897] ? wiphy_new_nm+0x1703/0x1dd0
[ 47.617280][ T1897] ? kmemdup+0x43/0x50
[ 47.617720][ T1897] brcmf_usb_probe+0x12de/0x1690
[ 47.618244][ T1897] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
[ 47.618901][ T1897] usb_probe_interface+0x2aa/0x760
[ 47.619429][ T1897] ? usb_probe_device+0x250/0x250
[ 47.619950][ T1897] really_probe+0x205/0xb70
[ 47.620435][ T1897] ? driver_allows_async_probing+0x130/0x130
[ 47.621048][ T1897] __driver_probe_device+0x311/0x4b0
[ 47.621595][ T1897] ? driver_allows_async_probing+0x130/0x130
[ 47.622209][ T1897] driver_probe_device+0x4e/0x150
[ 47.622739][ T1897] __device_attach_driver+0x1cc/0x2a0
[ 47.623287][ T1897] bus_for_each_drv+0x156/0x1d0
[ 47.623796][ T1897] ? bus_rescan_devices+0x30/0x30
[ 47.624309][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 47.624907][ T1897] ? trace_hardirqs_on+0x46/0x160
[ 47.625437][ T1897] __device_attach+0x23f/0x3a0
[ 47.625924][ T1897] ? device_bind_driver+0xd0/0xd0
[ 47.626433][ T1897] ? kobject_uevent_env+0x287/0x14b0
[ 47.627057][ T1897] bus_probe_device+0x1da/0x290
[ 47.627557][ T1897] device_add+0xb7b/0x1eb0
[ 47.628027][ T1897] ? wait_for_completion+0x290/0x290
[ 47.628593][ T1897] ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0
[ 47.629249][ T1897] usb_set_configuration+0xf59/0x16f0
[ 47.629829][ T1897] usb_generic_driver_probe+0x82/0xa0
[ 47.630385][ T1897] usb_probe_device+0xbb/0x250
[ 47.630927][ T1897] ? usb_suspend+0x590/0x590
[ 47.631397][ T1897] really_probe+0x205/0xb70
[ 47.631855][ T1897] ? driver_allows_async_probing+0x130/0x130
[ 47.632469][ T1897] __driver_probe_device+0x311/0x4b0
[ 47.633002][ T1897] ? usb_generic_driver_match+0x75/0x90
[ 47.633573][ T1897] ? driver_allows_async_probing+0x130/0x130
[ 47.634170][ T1897] driver_probe_device+0x4e/0x150
[ 47.634703][ T1897] __device_attach_driver+0x1cc/0x2a0
[ 47.635248][ T1897] bus_for_each_drv+0x156/0x1d0
[ 47.635748][ T1897] ? bus_rescan_devices+0x30/0x30
[ 47.636271][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 47.636881][ T1897] ? trace_hardirqs_on+0x46/0x160
[ 47.637396][ T1897] __device_attach+0x23f/0x3a0
[ 47.637904][ T1897] ? device_bind_driver+0xd0/0xd0
[ 47.638426][ T1897] ? kobject_uevent_env+0x287/0x14b0
[ 47.638985][ T1897] bus_probe_device+0x1da/0x290
[ 47.639512][ T1897] device_add+0xb7b/0x1eb0
[ 47.639977][ T1897] ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0
[ 47.640612][ T1897] ? kfree+0x14a/0x6b0
[ 47.641055][ T1897] ? __usb_get_extra_descriptor+0x116/0x160
[ 47.641679][ T1897] usb_new_device.cold+0x49c/0x1029
[ 47.642245][ T1897] ? hub_disconnect+0x450/0x450
[ 47.642756][ T1897] ? rwlock_bug.part.0+0x90/0x90
[ 47.643273][ T1897] ? _raw_spin_unlock_irq+0x24/0x30
[ 47.643822][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 47.644445][ T1897] hub_event+0x1c98/0x3950
[ 47.644939][ T1897] ? hub_port_debounce+0x2e0/0x2e0
[ 47.645467][ T1897] ? check_irq_usage+0x861/0xf20
[ 47.645975][ T1897] ? drain_workqueue+0x280/0x360
[ 47.646506][ T1897] ? lock_release+0x640/0x640
[ 47.646994][ T1897] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 47.647572][ T1897] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 47.648111][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 47.648735][ T1897] process_one_work+0x92b/0x1460
[ 47.649262][ T1897] ? pwq_dec_nr_in_flight+0x330/0x330
[ 47.649816][ T1897] ? rwlock_bug.part.0+0x90/0x90
[ 47.650336][ T1897] worker_thread+0x95/0xe00
[ 47.650830][ T1897] ? __kthread_parkme+0x115/0x1e0
[ 47.651361][ T1897] ? process_one_work+0x1460/0x1460
[ 47.651904][ T1897] kthread+0x3a1/0x480
[ 47.652329][ T1897] ? set_kthread_struct+0x120/0x120
[ 47.652878][ T1897] ret_from_fork+0x1f/0x30
[ 47.653370][ T1897]
[ 47.653608][ T1897]
[ 47.653848][ T1897] addr ffffc90001f6f000 is located in stack of task kworker/0:2/1897 at offset 512 in frame:
[ 47.654891][ T1897] brcmf_c_preinit_dcmds+0x0/0xc40
[ 47.655442][ T1897]
[ 47.655690][ T1897] this frame has 4 objects:
[ 47.656151][ T1897] [48, 56) 'ptr'
[ 47.656159][ T1897] [80, 148) 'revinfo'
[ 47.656534][ T1897] [192, 210) 'eventmask'
[ 47.656953][ T1897] [256, 512) 'buf'
[ 47.657410][ T1897]
[ 47.658035][ T1897] Memory state around the buggy address:
[ 47.658743][ T1897] ffffc90001f6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 47.659577][ T1897] ffffc90001f6ef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 47.660394][ T1897] >ffffc90001f6f000: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00
[ 47.661199][ T1897] ^
[ 47.661625][ T1897] ffffc90001f6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 47.662455][ T1897] ffffc90001f6f100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1
[ 47.663318][ T1897] ==================================================================
[ 47.664147][ T1897] Disabling lock debugging due to kernel taint
Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221115043458.37562-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index 22344e68fd597..789930806d03a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -298,6 +298,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
err);
goto done;
}
+ buf[sizeof(buf) - 1] = '\0';
ptr = (char *)buf;
strsep(&ptr, "\n");
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 548/885] rcu: Make RCU_LOCKDEP_WARN() avoid early lockdep checks
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (546 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 547/885] wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds() Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 549/885] rcu: Suppress smp_processor_id() complaint in synchronize_rcu_expedited_wait() Greg Kroah-Hartman
` (339 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Steven Rostedt,
Masami Hiramatsu (Google),
Mathieu Desnoyers, Paul E. McKenney, Boqun Feng, Matthew Wilcox,
Thomas Gleixner, Sasha Levin
From: Paul E. McKenney <paulmck@kernel.org>
[ Upstream commit 0cae5ded535c3a80aed94f119bbd4ee3ae284a65 ]
Currently, RCU_LOCKDEP_WARN() checks the condition before checking
to see if lockdep is still enabled. This is necessary to avoid the
false-positive splats fixed by commit 3066820034b5dd ("rcu: Reject
RCU_LOCKDEP_WARN() false positives"). However, the current state can
result in false-positive splats during early boot before lockdep is fully
initialized. This commit therefore checks debug_lockdep_rcu_enabled()
both before and after checking the condition, thus avoiding both sets
of false-positive error reports.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/rcupdate.h | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 4a3fd3404ad0c..e9e61cd27ef63 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -350,11 +350,18 @@ static inline int rcu_read_lock_any_held(void)
* RCU_LOCKDEP_WARN - emit lockdep splat if specified condition is met
* @c: condition to check
* @s: informative message
+ *
+ * This checks debug_lockdep_rcu_enabled() before checking (c) to
+ * prevent early boot splats due to lockdep not yet being initialized,
+ * and rechecks it after checking (c) to prevent false-positive splats
+ * due to races with lockdep being disabled. See commit 3066820034b5dd
+ * ("rcu: Reject RCU_LOCKDEP_WARN() false positives") for more detail.
*/
#define RCU_LOCKDEP_WARN(c, s) \
do { \
static bool __section(".data.unlikely") __warned; \
- if ((c) && debug_lockdep_rcu_enabled() && !__warned) { \
+ if (debug_lockdep_rcu_enabled() && (c) && \
+ debug_lockdep_rcu_enabled() && !__warned) { \
__warned = true; \
lockdep_rcu_suspicious(__FILE__, __LINE__, s); \
} \
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 549/885] rcu: Suppress smp_processor_id() complaint in synchronize_rcu_expedited_wait()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (547 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 548/885] rcu: Make RCU_LOCKDEP_WARN() avoid early lockdep checks Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 550/885] srcu: Delegate work to the boot cpu if using SRCU_SIZE_SMALL Greg Kroah-Hartman
` (338 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Paul E. McKenney, Sasha Levin
From: Paul E. McKenney <paulmck@kernel.org>
[ Upstream commit 2d7f00b2f01301d6e41fd4a28030dab0442265be ]
The normal grace period's RCU CPU stall warnings are invoked from the
scheduling-clock interrupt handler, and can thus invoke smp_processor_id()
with impunity, which allows them to directly invoke dump_cpu_task().
In contrast, the expedited grace period's RCU CPU stall warnings are
invoked from process context, which causes the dump_cpu_task() function's
calls to smp_processor_id() to complain bitterly in debug kernels.
This commit therefore causes synchronize_rcu_expedited_wait() to disable
preemption around its call to dump_cpu_task().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/rcu/tree_exp.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
index 18e9b4cd78ef8..60732264a7d0b 100644
--- a/kernel/rcu/tree_exp.h
+++ b/kernel/rcu/tree_exp.h
@@ -667,7 +667,9 @@ static void synchronize_rcu_expedited_wait(void)
mask = leaf_node_cpu_bit(rnp, cpu);
if (!(READ_ONCE(rnp->expmask) & mask))
continue;
+ preempt_disable(); // For smp_processor_id() in dump_cpu_task().
dump_cpu_task(cpu);
+ preempt_enable();
}
}
jiffies_stall = 3 * rcu_exp_jiffies_till_stall_check() + 3;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 550/885] srcu: Delegate work to the boot cpu if using SRCU_SIZE_SMALL
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (548 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 549/885] rcu: Suppress smp_processor_id() complaint in synchronize_rcu_expedited_wait() Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 551/885] rcu-tasks: Make rude RCU-Tasks work well with CPU hotplug Greg Kroah-Hartman
` (337 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable, rcu
Cc: Greg Kroah-Hartman, patches, Pingfan Liu, Paul E. McKenney,
Lai Jiangshan, Josh Triplett, Steven Rostedt, Mathieu Desnoyers,
Sasha Levin
From: Pingfan Liu <kernelfans@gmail.com>
[ Upstream commit 7f24626d6dd844bfc6d1f492d214d29c86d02550 ]
Commit 994f706872e6 ("srcu: Make Tree SRCU able to operate without
snp_node array") assumes that cpu 0 is always online. However, there
really are situations when some other CPU is the boot CPU, for example,
when booting a kdump kernel with the maxcpus=1 boot parameter.
On PowerPC, the kdump kernel can hang as follows:
...
[ 1.740036] systemd[1]: Hostname set to <xyz.com>
[ 243.686240] INFO: task systemd:1 blocked for more than 122 seconds.
[ 243.686264] Not tainted 6.1.0-rc1 #1
[ 243.686272] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 243.686281] task:systemd state:D stack:0 pid:1 ppid:0 flags:0x00042000
[ 243.686296] Call Trace:
[ 243.686301] [c000000016657640] [c000000016657670] 0xc000000016657670 (unreliable)
[ 243.686317] [c000000016657830] [c00000001001dec0] __switch_to+0x130/0x220
[ 243.686333] [c000000016657890] [c000000010f607b8] __schedule+0x1f8/0x580
[ 243.686347] [c000000016657940] [c000000010f60bb4] schedule+0x74/0x140
[ 243.686361] [c0000000166579b0] [c000000010f699b8] schedule_timeout+0x168/0x1c0
[ 243.686374] [c000000016657a80] [c000000010f61de8] __wait_for_common+0x148/0x360
[ 243.686387] [c000000016657b20] [c000000010176bb0] __flush_work.isra.0+0x1c0/0x3d0
[ 243.686401] [c000000016657bb0] [c0000000105f2768] fsnotify_wait_marks_destroyed+0x28/0x40
[ 243.686415] [c000000016657bd0] [c0000000105f21b8] fsnotify_destroy_group+0x68/0x160
[ 243.686428] [c000000016657c40] [c0000000105f6500] inotify_release+0x30/0xa0
[ 243.686440] [c000000016657cb0] [c0000000105751a8] __fput+0xc8/0x350
[ 243.686452] [c000000016657d00] [c00000001017d524] task_work_run+0xe4/0x170
[ 243.686464] [c000000016657d50] [c000000010020e94] do_notify_resume+0x134/0x140
[ 243.686478] [c000000016657d80] [c00000001002eb18] interrupt_exit_user_prepare_main+0x198/0x270
[ 243.686493] [c000000016657de0] [c00000001002ec60] syscall_exit_prepare+0x70/0x180
[ 243.686505] [c000000016657e10] [c00000001000bf7c] system_call_vectored_common+0xfc/0x280
[ 243.686520] --- interrupt: 3000 at 0x7fffa47d5ba4
[ 243.686528] NIP: 00007fffa47d5ba4 LR: 0000000000000000 CTR: 0000000000000000
[ 243.686538] REGS: c000000016657e80 TRAP: 3000 Not tainted (6.1.0-rc1)
[ 243.686548] MSR: 800000000000d033 <SF,EE,PR,ME,IR,DR,RI,LE> CR: 42044440 XER: 00000000
[ 243.686572] IRQMASK: 0
[ 243.686572] GPR00: 0000000000000006 00007ffffa606710 00007fffa48e7200 0000000000000000
[ 243.686572] GPR04: 0000000000000002 000000000000000a 0000000000000000 0000000000000001
[ 243.686572] GPR08: 000001000c172dd0 0000000000000000 0000000000000000 0000000000000000
[ 243.686572] GPR12: 0000000000000000 00007fffa4ff4bc0 0000000000000000 0000000000000000
[ 243.686572] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 243.686572] GPR20: 0000000132dfdc50 000000000000000e 0000000000189375 0000000000000000
[ 243.686572] GPR24: 00007ffffa606ae0 0000000000000005 000001000c185490 000001000c172570
[ 243.686572] GPR28: 000001000c172990 000001000c184850 000001000c172e00 00007fffa4fedd98
[ 243.686683] NIP [00007fffa47d5ba4] 0x7fffa47d5ba4
[ 243.686691] LR [0000000000000000] 0x0
[ 243.686698] --- interrupt: 3000
[ 243.686708] INFO: task kworker/u16:1:24 blocked for more than 122 seconds.
[ 243.686717] Not tainted 6.1.0-rc1 #1
[ 243.686724] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 243.686733] task:kworker/u16:1 state:D stack:0 pid:24 ppid:2 flags:0x00000800
[ 243.686747] Workqueue: events_unbound fsnotify_mark_destroy_workfn
[ 243.686758] Call Trace:
[ 243.686762] [c0000000166736e0] [c00000004fd91000] 0xc00000004fd91000 (unreliable)
[ 243.686775] [c0000000166738d0] [c00000001001dec0] __switch_to+0x130/0x220
[ 243.686788] [c000000016673930] [c000000010f607b8] __schedule+0x1f8/0x580
[ 243.686801] [c0000000166739e0] [c000000010f60bb4] schedule+0x74/0x140
[ 243.686814] [c000000016673a50] [c000000010f699b8] schedule_timeout+0x168/0x1c0
[ 243.686827] [c000000016673b20] [c000000010f61de8] __wait_for_common+0x148/0x360
[ 243.686840] [c000000016673bc0] [c000000010210840] __synchronize_srcu.part.0+0xa0/0xe0
[ 243.686855] [c000000016673c30] [c0000000105f2c64] fsnotify_mark_destroy_workfn+0xc4/0x1a0
[ 243.686868] [c000000016673ca0] [c000000010174ea8] process_one_work+0x2a8/0x570
[ 243.686882] [c000000016673d40] [c000000010175208] worker_thread+0x98/0x5e0
[ 243.686895] [c000000016673dc0] [c0000000101828d4] kthread+0x124/0x130
[ 243.686908] [c000000016673e10] [c00000001000cd40] ret_from_kernel_thread+0x5c/0x64
[ 366.566274] INFO: task systemd:1 blocked for more than 245 seconds.
[ 366.566298] Not tainted 6.1.0-rc1 #1
[ 366.566305] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 366.566314] task:systemd state:D stack:0 pid:1 ppid:0 flags:0x00042000
[ 366.566329] Call Trace:
...
The above splat occurs because PowerPC really does use maxcpus=1
instead of nr_cpus=1 in the kernel command line. Consequently, the
(quite possibly non-zero) kdump CPU is the only online CPU in the kdump
kernel. SRCU unconditionally queues a sdp->work on cpu 0, for which no
worker thread has been created, so sdp->work will be never executed and
__synchronize_srcu() will never be completed.
This commit therefore replaces CPU ID 0 with get_boot_cpu_id() in key
places in Tree SRCU. Since the CPU indicated by get_boot_cpu_id()
is guaranteed to be online, this avoids the above splat.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
To: rcu@vger.kernel.org
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/rcu/srcutree.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
index 1c304fec89c02..4db36d543be37 100644
--- a/kernel/rcu/srcutree.c
+++ b/kernel/rcu/srcutree.c
@@ -663,7 +663,7 @@ static void srcu_gp_start(struct srcu_struct *ssp)
int state;
if (smp_load_acquire(&ssp->srcu_size_state) < SRCU_SIZE_WAIT_BARRIER)
- sdp = per_cpu_ptr(ssp->sda, 0);
+ sdp = per_cpu_ptr(ssp->sda, get_boot_cpu_id());
else
sdp = this_cpu_ptr(ssp->sda);
lockdep_assert_held(&ACCESS_PRIVATE(ssp, lock));
@@ -774,7 +774,8 @@ static void srcu_gp_end(struct srcu_struct *ssp)
/* Initiate callback invocation as needed. */
ss_state = smp_load_acquire(&ssp->srcu_size_state);
if (ss_state < SRCU_SIZE_WAIT_BARRIER) {
- srcu_schedule_cbs_sdp(per_cpu_ptr(ssp->sda, 0), cbdelay);
+ srcu_schedule_cbs_sdp(per_cpu_ptr(ssp->sda, get_boot_cpu_id()),
+ cbdelay);
} else {
idx = rcu_seq_ctr(gpseq) % ARRAY_SIZE(snp->srcu_have_cbs);
srcu_for_each_node_breadth_first(ssp, snp) {
@@ -1093,7 +1094,7 @@ static unsigned long srcu_gp_start_if_needed(struct srcu_struct *ssp,
idx = srcu_read_lock(ssp);
ss_state = smp_load_acquire(&ssp->srcu_size_state);
if (ss_state < SRCU_SIZE_WAIT_CALL)
- sdp = per_cpu_ptr(ssp->sda, 0);
+ sdp = per_cpu_ptr(ssp->sda, get_boot_cpu_id());
else
sdp = raw_cpu_ptr(ssp->sda);
spin_lock_irqsave_sdp_contention(sdp, &flags);
@@ -1429,7 +1430,7 @@ void srcu_barrier(struct srcu_struct *ssp)
idx = srcu_read_lock(ssp);
if (smp_load_acquire(&ssp->srcu_size_state) < SRCU_SIZE_WAIT_BARRIER)
- srcu_barrier_one_cpu(ssp, per_cpu_ptr(ssp->sda, 0));
+ srcu_barrier_one_cpu(ssp, per_cpu_ptr(ssp->sda, get_boot_cpu_id()));
else
for_each_possible_cpu(cpu)
srcu_barrier_one_cpu(ssp, per_cpu_ptr(ssp->sda, cpu));
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 551/885] rcu-tasks: Make rude RCU-Tasks work well with CPU hotplug
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (549 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 550/885] srcu: Delegate work to the boot cpu if using SRCU_SIZE_SMALL Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 552/885] rcu-tasks: Handle queue-shrink/callback-enqueue race condition Greg Kroah-Hartman
` (336 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zqiang, Paul E. McKenney, Sasha Levin
From: Zqiang <qiang1.zhang@intel.com>
[ Upstream commit ea5c8987fef20a8cca07e428aa28bc64649c5104 ]
The synchronize_rcu_tasks_rude() function invokes rcu_tasks_rude_wait_gp()
to wait one rude RCU-tasks grace period. The rcu_tasks_rude_wait_gp()
function in turn checks if there is only a single online CPU. If so, it
will immediately return, because a call to synchronize_rcu_tasks_rude()
is by definition a grace period on a single-CPU system. (We could
have blocked!)
Unfortunately, this check uses num_online_cpus() without synchronization,
which can result in too-short grace periods. To see this, consider the
following scenario:
CPU0 CPU1 (going offline)
migration/1 task:
cpu_stopper_thread
-> take_cpu_down
-> _cpu_disable
(dec __num_online_cpus)
->cpuhp_invoke_callback
preempt_disable
access old_data0
task1
del old_data0 .....
synchronize_rcu_tasks_rude()
task1 schedule out
....
task2 schedule in
rcu_tasks_rude_wait_gp()
->__num_online_cpus == 1
->return
....
task1 schedule in
->free old_data0
preempt_enable
When CPU1 decrements __num_online_cpus, its value becomes 1. However,
CPU1 has not finished going offline, and will take one last trip through
the scheduler and the idle loop before it actually stops executing
instructions. Because synchronize_rcu_tasks_rude() is mostly used for
tracing, and because both the scheduler and the idle loop can be traced,
this means that CPU0's prematurely ended grace period might disrupt the
tracing on CPU1. Given that this disruption might include CPU1 executing
instructions in memory that was just now freed (and maybe reallocated),
this is a matter of some concern.
This commit therefore removes that problematic single-CPU check from the
rcu_tasks_rude_wait_gp() function. This dispenses with the single-CPU
optimization, but there is no evidence indicating that this optimization
is important. In addition, synchronize_rcu_tasks_generic() contains a
similar optimization (albeit only for early boot), which also splats.
(As in exactly why are you invoking synchronize_rcu_tasks_rude() so
early in boot, anyway???)
It is OK for the synchronize_rcu_tasks_rude() function's check to be
unsynchronized because the only times that this check can evaluate to
true is when there is only a single CPU running with preemption
disabled.
While in the area, this commit also fixes a minor bug in which a
call to synchronize_rcu_tasks_rude() would instead be attributed to
synchronize_rcu_tasks().
[ paulmck: Add "synchronize_" prefix and "()" suffix. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/rcu/tasks.h | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
index a701001e8b321..0a8824bbfa372 100644
--- a/kernel/rcu/tasks.h
+++ b/kernel/rcu/tasks.h
@@ -560,8 +560,9 @@ static int __noreturn rcu_tasks_kthread(void *arg)
static void synchronize_rcu_tasks_generic(struct rcu_tasks *rtp)
{
/* Complain if the scheduler has not started. */
- WARN_ONCE(rcu_scheduler_active == RCU_SCHEDULER_INACTIVE,
- "synchronize_rcu_tasks called too soon");
+ if (WARN_ONCE(rcu_scheduler_active == RCU_SCHEDULER_INACTIVE,
+ "synchronize_%s() called too soon", rtp->name))
+ return;
// If the grace-period kthread is running, use it.
if (READ_ONCE(rtp->kthread_ptr)) {
@@ -1064,9 +1065,6 @@ static void rcu_tasks_be_rude(struct work_struct *work)
// Wait for one rude RCU-tasks grace period.
static void rcu_tasks_rude_wait_gp(struct rcu_tasks *rtp)
{
- if (num_online_cpus() <= 1)
- return; // Fastpath for only one CPU.
-
rtp->n_ipis += cpumask_weight(cpu_online_mask);
schedule_on_each_cpu(rcu_tasks_be_rude);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 552/885] rcu-tasks: Handle queue-shrink/callback-enqueue race condition
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (550 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 551/885] rcu-tasks: Make rude RCU-Tasks work well with CPU hotplug Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 553/885] wifi: ath11k: debugfs: fix to work with multiple PCI devices Greg Kroah-Hartman
` (335 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zqiang, Paul E. McKenney, Sasha Levin
From: Zqiang <qiang1.zhang@intel.com>
[ Upstream commit a4fcfbee8f6274f9b3f9a71dd5b03e6772ce33f3 ]
The rcu_tasks_need_gpcb() determines whether or not: (1) There are
callbacks needing another grace period, (2) There are callbacks ready
to be invoked, and (3) It would be a good time to shrink back down to a
single-CPU callback list. This third case is interesting because some
other CPU might be adding new callbacks, which might suddenly make this
a very bad time to be shrinking.
This is currently handled by requiring call_rcu_tasks_generic() to
enqueue callbacks under the protection of rcu_read_lock() and requiring
rcu_tasks_need_gpcb() to wait for an RCU grace period to elapse before
finalizing the transition. This works well in practice.
Unfortunately, the current code assumes that a grace period whose end is
detected by the poll_state_synchronize_rcu() in the second "if" condition
actually ended before the earlier code counted the callbacks queued on
CPUs other than CPU 0 (local variable "ncbsnz"). Given the current code,
it is possible that a long-delayed call_rcu_tasks_generic() invocation
will queue a callback on a non-zero CPU after these CPUs have had their
callbacks counted and zero has been stored to ncbsnz. Such a callback
would trigger the WARN_ON_ONCE() in the second "if" statement.
To see this, consider the following sequence of events:
o CPU 0 invokes rcu_tasks_one_gp(), and counts fewer than
rcu_task_collapse_lim callbacks. It sees at least one
callback queued on some other CPU, thus setting ncbsnz
to a non-zero value.
o CPU 1 invokes call_rcu_tasks_generic() and loads 42 from
->percpu_enqueue_lim. It therefore decides to enqueue its
callback onto CPU 1's callback list, but is delayed.
o CPU 0 sees the rcu_task_cb_adjust is non-zero and that the number
of callbacks does not exceed rcu_task_collapse_lim. It therefore
checks percpu_enqueue_lim, and sees that its value is greater
than the value one. CPU 0 therefore starts the shift back
to a single callback list. It sets ->percpu_enqueue_lim to 1,
but CPU 1 has already read the old value of 42. It also gets
a grace-period state value from get_state_synchronize_rcu().
o CPU 0 sees that ncbsnz is non-zero in its second "if" statement,
so it declines to finalize the shrink operation.
o CPU 0 again invokes rcu_tasks_one_gp(), and counts fewer than
rcu_task_collapse_lim callbacks. It also sees that there are
no callback queued on any other CPU, and thus sets ncbsnz to zero.
o CPU 1 resumes execution and enqueues its callback onto its own
list. This invalidates the value of ncbsnz.
o CPU 0 sees the rcu_task_cb_adjust is non-zero and that the number
of callbacks does not exceed rcu_task_collapse_lim. It therefore
checks percpu_enqueue_lim, but sees that its value is already
unity. It therefore does not get a new grace-period state value.
o CPU 0 sees that rcu_task_cb_adjust is non-zero, ncbsnz is zero,
and that poll_state_synchronize_rcu() says that the grace period
has completed. it therefore finalizes the shrink operation,
setting ->percpu_dequeue_lim to the value one.
o CPU 0 does a debug check, scanning the other CPUs' callback lists.
It sees that CPU 1's list has a callback, so it (rightly)
triggers the WARN_ON_ONCE(). After all, the new value of
->percpu_dequeue_lim says to not bother looking at CPU 1's
callback list, which means that this callback will never be
invoked. This can result in hangs and maybe even OOMs.
Based on long experience with rcutorture, this is an extremely
low-probability race condition, but it really can happen, especially in
preemptible kernels or within guest OSes.
This commit therefore checks for completion of the grace period
before counting callbacks. With this change, in the above failure
scenario CPU 0 would know not to prematurely end the shrink operation
because the grace period would not have completed before the count
operation started.
[ paulmck: Adjust grace-period end rather than adding RCU reader. ]
[ paulmck: Avoid spurious WARN_ON_ONCE() with ->percpu_dequeue_lim check. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/rcu/tasks.h | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
index 0a8824bbfa372..c8409601fec38 100644
--- a/kernel/rcu/tasks.h
+++ b/kernel/rcu/tasks.h
@@ -384,6 +384,7 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp)
{
int cpu;
unsigned long flags;
+ bool gpdone = poll_state_synchronize_rcu(rtp->percpu_dequeue_gpseq);
long n;
long ncbs = 0;
long ncbsnz = 0;
@@ -425,21 +426,23 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp)
WRITE_ONCE(rtp->percpu_enqueue_shift, order_base_2(nr_cpu_ids));
smp_store_release(&rtp->percpu_enqueue_lim, 1);
rtp->percpu_dequeue_gpseq = get_state_synchronize_rcu();
+ gpdone = false;
pr_info("Starting switch %s to CPU-0 callback queuing.\n", rtp->name);
}
raw_spin_unlock_irqrestore(&rtp->cbs_gbl_lock, flags);
}
- if (rcu_task_cb_adjust && !ncbsnz &&
- poll_state_synchronize_rcu(rtp->percpu_dequeue_gpseq)) {
+ if (rcu_task_cb_adjust && !ncbsnz && gpdone) {
raw_spin_lock_irqsave(&rtp->cbs_gbl_lock, flags);
if (rtp->percpu_enqueue_lim < rtp->percpu_dequeue_lim) {
WRITE_ONCE(rtp->percpu_dequeue_lim, 1);
pr_info("Completing switch %s to CPU-0 callback queuing.\n", rtp->name);
}
- for (cpu = rtp->percpu_dequeue_lim; cpu < nr_cpu_ids; cpu++) {
- struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu);
+ if (rtp->percpu_dequeue_lim == 1) {
+ for (cpu = rtp->percpu_dequeue_lim; cpu < nr_cpu_ids; cpu++) {
+ struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu);
- WARN_ON_ONCE(rcu_segcblist_n_cbs(&rtpcp->cblist));
+ WARN_ON_ONCE(rcu_segcblist_n_cbs(&rtpcp->cblist));
+ }
}
raw_spin_unlock_irqrestore(&rtp->cbs_gbl_lock, flags);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 553/885] wifi: ath11k: debugfs: fix to work with multiple PCI devices
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (551 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 552/885] rcu-tasks: Handle queue-shrink/callback-enqueue race condition Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 554/885] thermal: intel: Fix unsigned comparison with less than zero Greg Kroah-Hartman
` (334 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Robert Marko, Kalle Valo, Sasha Levin
From: Kalle Valo <quic_kvalo@quicinc.com>
[ Upstream commit 323d91d4684d238f6bc3693fed93caf795378fe0 ]
ath11k fails to load if there are multiple ath11k PCI devices with same name:
ath11k_pci 0000:01:00.0: Hardware name qcn9074 hw1.0
debugfs: Directory 'ath11k' with parent '/' already present!
ath11k_pci 0000:01:00.0: failed to create ath11k debugfs
ath11k_pci 0000:01:00.0: failed to create soc core: -17
ath11k_pci 0000:01:00.0: failed to init core: -17
ath11k_pci: probe of 0000:01:00.0 failed with error -17
Fix this by creating a directory for each ath11k device using schema
<bus>-<devname>, for example "pci-0000:06:00.0". This directory created under
the top-level ath11k directory, for example /sys/kernel/debug/ath11k.
The reference to the toplevel ath11k directory is not stored anymore within ath11k, instead
it's retrieved using debugfs_lookup(). If the directory does not exist it will
be created. After the last directory from the ath11k directory is removed, for
example when doing rmmod ath11k, the empty ath11k directory is left in place,
it's a minor cosmetic issue anyway.
Here's an example hierarchy with one WCN6855:
ath11k
`-- pci-0000:06:00.0
|-- mac0
| |-- dfs_block_radar_events
| |-- dfs_simulate_radar
| |-- ext_rx_stats
| |-- ext_tx_stats
| |-- fw_dbglog_config
| |-- fw_stats
| | |-- beacon_stats
| | |-- pdev_stats
| | `-- vdev_stats
| |-- htt_stats
| |-- htt_stats_reset
| |-- htt_stats_type
| `-- pktlog_filter
|-- simulate_fw_crash
`-- soc_dp_stats
I didn't have a test setup where I could connect multiple ath11k devices to the
same the host, so I have only tested this with one device.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221220121231.20120-1-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath11k/core.h | 1 -
drivers/net/wireless/ath/ath11k/debugfs.c | 48 +++++++++++++++++++----
2 files changed, 40 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index c20e84e031fad..bd06536f82a64 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -912,7 +912,6 @@ struct ath11k_base {
enum ath11k_dfs_region dfs_region;
#ifdef CONFIG_ATH11K_DEBUGFS
struct dentry *debugfs_soc;
- struct dentry *debugfs_ath11k;
#endif
struct ath11k_soc_dp_stats soc_stats;
diff --git a/drivers/net/wireless/ath/ath11k/debugfs.c b/drivers/net/wireless/ath/ath11k/debugfs.c
index ccdf3d5ba1ab6..5bb6fd17fdf6f 100644
--- a/drivers/net/wireless/ath/ath11k/debugfs.c
+++ b/drivers/net/wireless/ath/ath11k/debugfs.c
@@ -976,10 +976,6 @@ int ath11k_debugfs_pdev_create(struct ath11k_base *ab)
if (test_bit(ATH11K_FLAG_REGISTERED, &ab->dev_flags))
return 0;
- ab->debugfs_soc = debugfs_create_dir(ab->hw_params.name, ab->debugfs_ath11k);
- if (IS_ERR(ab->debugfs_soc))
- return PTR_ERR(ab->debugfs_soc);
-
debugfs_create_file("simulate_fw_crash", 0600, ab->debugfs_soc, ab,
&fops_simulate_fw_crash);
@@ -1001,15 +997,51 @@ void ath11k_debugfs_pdev_destroy(struct ath11k_base *ab)
int ath11k_debugfs_soc_create(struct ath11k_base *ab)
{
- ab->debugfs_ath11k = debugfs_create_dir("ath11k", NULL);
+ struct dentry *root;
+ bool dput_needed;
+ char name[64];
+ int ret;
+
+ root = debugfs_lookup("ath11k", NULL);
+ if (!root) {
+ root = debugfs_create_dir("ath11k", NULL);
+ if (IS_ERR_OR_NULL(root))
+ return PTR_ERR(root);
+
+ dput_needed = false;
+ } else {
+ /* a dentry from lookup() needs dput() after we don't use it */
+ dput_needed = true;
+ }
+
+ scnprintf(name, sizeof(name), "%s-%s", ath11k_bus_str(ab->hif.bus),
+ dev_name(ab->dev));
+
+ ab->debugfs_soc = debugfs_create_dir(name, root);
+ if (IS_ERR_OR_NULL(ab->debugfs_soc)) {
+ ret = PTR_ERR(ab->debugfs_soc);
+ goto out;
+ }
+
+ ret = 0;
- return PTR_ERR_OR_ZERO(ab->debugfs_ath11k);
+out:
+ if (dput_needed)
+ dput(root);
+
+ return ret;
}
void ath11k_debugfs_soc_destroy(struct ath11k_base *ab)
{
- debugfs_remove_recursive(ab->debugfs_ath11k);
- ab->debugfs_ath11k = NULL;
+ debugfs_remove_recursive(ab->debugfs_soc);
+ ab->debugfs_soc = NULL;
+
+ /* We are not removing ath11k directory on purpose, even if it
+ * would be empty. This simplifies the directory handling and it's
+ * a minor cosmetic issue to leave an empty ath11k directory to
+ * debugfs.
+ */
}
EXPORT_SYMBOL(ath11k_debugfs_soc_destroy);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 554/885] thermal: intel: Fix unsigned comparison with less than zero
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (552 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 553/885] wifi: ath11k: debugfs: fix to work with multiple PCI devices Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 555/885] timers: Prevent union confusion from unexpected restart_syscall() Greg Kroah-Hartman
` (333 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Abaci Robot, Yang Li, Zhang Rui,
Rafael J. Wysocki, Sasha Levin
From: Yang Li <yang.lee@linux.alibaba.com>
[ Upstream commit e7fcfe67f9f410736b758969477b17ea285e8e6c ]
The return value from the call to intel_tcc_get_tjmax() is int, which can
be a negative error code. However, the return value is being assigned to
an u32 variable 'tj_max', so making 'tj_max' an int.
Eliminate the following warning:
./drivers/thermal/intel/intel_soc_dts_iosf.c:394:5-11: WARNING: Unsigned expression compared with zero: tj_max < 0
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3637
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/intel/intel_soc_dts_iosf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c
index 342b0bb5a56d9..8651ff1abe754 100644
--- a/drivers/thermal/intel/intel_soc_dts_iosf.c
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.c
@@ -405,7 +405,7 @@ struct intel_soc_dts_sensors *intel_soc_dts_iosf_init(
{
struct intel_soc_dts_sensors *sensors;
bool notification;
- u32 tj_max;
+ int tj_max;
int ret;
int i;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 555/885] timers: Prevent union confusion from unexpected restart_syscall()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (553 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 554/885] thermal: intel: Fix unsigned comparison with less than zero Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 556/885] x86/bugs: Reset speculation control settings on init Greg Kroah-Hartman
` (332 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jann Horn, Thomas Gleixner, Sasha Levin
From: Jann Horn <jannh@google.com>
[ Upstream commit 9f76d59173d9d146e96c66886b671c1915a5c5e5 ]
The nanosleep syscalls use the restart_block mechanism, with a quirk:
The `type` and `rmtp`/`compat_rmtp` fields are set up unconditionally on
syscall entry, while the rest of the restart_block is only set up in the
unlikely case that the syscall is actually interrupted by a signal (or
pseudo-signal) that doesn't have a signal handler.
If the restart_block was set up by a previous syscall (futex(...,
FUTEX_WAIT, ...) or poll()) and hasn't been invalidated somehow since then,
this will clobber some of the union fields used by futex_wait_restart() and
do_restart_poll().
If userspace afterwards wrongly calls the restart_syscall syscall,
futex_wait_restart()/do_restart_poll() will read struct fields that have
been clobbered.
This doesn't actually lead to anything particularly interesting because
none of the union fields contain trusted kernel data, and
futex(..., FUTEX_WAIT, ...) and poll() aren't syscalls where it makes much
sense to apply seccomp filters to their arguments.
So the current consequences are just of the "if userspace does bad stuff,
it can damage itself, and that's not a problem" flavor.
But still, it seems like a hazard for future developers, so invalidate the
restart_block when partly setting it up in the nanosleep syscalls.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230105134403.754986-1-jannh@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/time/hrtimer.c | 2 ++
kernel/time/posix-stubs.c | 2 ++
kernel/time/posix-timers.c | 2 ++
3 files changed, 6 insertions(+)
diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
index 3ae661ab62603..e4f0e3b0c4f4f 100644
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
@@ -2126,6 +2126,7 @@ SYSCALL_DEFINE2(nanosleep, struct __kernel_timespec __user *, rqtp,
if (!timespec64_valid(&tu))
return -EINVAL;
+ current->restart_block.fn = do_no_restart_syscall;
current->restart_block.nanosleep.type = rmtp ? TT_NATIVE : TT_NONE;
current->restart_block.nanosleep.rmtp = rmtp;
return hrtimer_nanosleep(timespec64_to_ktime(tu), HRTIMER_MODE_REL,
@@ -2147,6 +2148,7 @@ SYSCALL_DEFINE2(nanosleep_time32, struct old_timespec32 __user *, rqtp,
if (!timespec64_valid(&tu))
return -EINVAL;
+ current->restart_block.fn = do_no_restart_syscall;
current->restart_block.nanosleep.type = rmtp ? TT_COMPAT : TT_NONE;
current->restart_block.nanosleep.compat_rmtp = rmtp;
return hrtimer_nanosleep(timespec64_to_ktime(tu), HRTIMER_MODE_REL,
diff --git a/kernel/time/posix-stubs.c b/kernel/time/posix-stubs.c
index 90ea5f373e50e..828aeecbd1e8a 100644
--- a/kernel/time/posix-stubs.c
+++ b/kernel/time/posix-stubs.c
@@ -147,6 +147,7 @@ SYSCALL_DEFINE4(clock_nanosleep, const clockid_t, which_clock, int, flags,
return -EINVAL;
if (flags & TIMER_ABSTIME)
rmtp = NULL;
+ current->restart_block.fn = do_no_restart_syscall;
current->restart_block.nanosleep.type = rmtp ? TT_NATIVE : TT_NONE;
current->restart_block.nanosleep.rmtp = rmtp;
texp = timespec64_to_ktime(t);
@@ -240,6 +241,7 @@ SYSCALL_DEFINE4(clock_nanosleep_time32, clockid_t, which_clock, int, flags,
return -EINVAL;
if (flags & TIMER_ABSTIME)
rmtp = NULL;
+ current->restart_block.fn = do_no_restart_syscall;
current->restart_block.nanosleep.type = rmtp ? TT_COMPAT : TT_NONE;
current->restart_block.nanosleep.compat_rmtp = rmtp;
texp = timespec64_to_ktime(t);
diff --git a/kernel/time/posix-timers.c b/kernel/time/posix-timers.c
index 5dead89308b74..0c8a87a11b39d 100644
--- a/kernel/time/posix-timers.c
+++ b/kernel/time/posix-timers.c
@@ -1270,6 +1270,7 @@ SYSCALL_DEFINE4(clock_nanosleep, const clockid_t, which_clock, int, flags,
return -EINVAL;
if (flags & TIMER_ABSTIME)
rmtp = NULL;
+ current->restart_block.fn = do_no_restart_syscall;
current->restart_block.nanosleep.type = rmtp ? TT_NATIVE : TT_NONE;
current->restart_block.nanosleep.rmtp = rmtp;
@@ -1297,6 +1298,7 @@ SYSCALL_DEFINE4(clock_nanosleep_time32, clockid_t, which_clock, int, flags,
return -EINVAL;
if (flags & TIMER_ABSTIME)
rmtp = NULL;
+ current->restart_block.fn = do_no_restart_syscall;
current->restart_block.nanosleep.type = rmtp ? TT_COMPAT : TT_NONE;
current->restart_block.nanosleep.compat_rmtp = rmtp;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 556/885] x86/bugs: Reset speculation control settings on init
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (554 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 555/885] timers: Prevent union confusion from unexpected restart_syscall() Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 557/885] bpftool: Always disable stack protection for BPF objects Greg Kroah-Hartman
` (331 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pawan Gupta, Breno Leitao,
Borislav Petkov (AMD),
Sasha Levin
From: Breno Leitao <leitao@debian.org>
[ Upstream commit 0125acda7d76b943ca55811df40ed6ec0ecf670f ]
Currently, x86_spec_ctrl_base is read at boot time and speculative bits
are set if Kconfig items are enabled. For example, IBRS is enabled if
CONFIG_CPU_IBRS_ENTRY is configured, etc. These MSR bits are not cleared
if the mitigations are disabled.
This is a problem when kexec-ing a kernel that has the mitigation
disabled from a kernel that has the mitigation enabled. In this case,
the MSR bits are not cleared during the new kernel boot. As a result,
this might have some performance degradation that is hard to pinpoint.
This problem does not happen if the machine is (hard) rebooted because
the bit will be cleared by default.
[ bp: Massage. ]
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221128153148.1129350-1-leitao@debian.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/include/asm/msr-index.h | 4 ++++
arch/x86/kernel/cpu/bugs.c | 10 +++++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 91447f018f6e4..117e4e977b55d 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -54,6 +54,10 @@
#define SPEC_CTRL_RRSBA_DIS_S_SHIFT 6 /* Disable RRSBA behavior */
#define SPEC_CTRL_RRSBA_DIS_S BIT(SPEC_CTRL_RRSBA_DIS_S_SHIFT)
+/* A mask for bits which the kernel toggles when controlling mitigations */
+#define SPEC_CTRL_MITIGATIONS_MASK (SPEC_CTRL_IBRS | SPEC_CTRL_STIBP | SPEC_CTRL_SSBD \
+ | SPEC_CTRL_RRSBA_DIS_S)
+
#define MSR_IA32_PRED_CMD 0x00000049 /* Prediction Command */
#define PRED_CMD_IBPB BIT(0) /* Indirect Branch Prediction Barrier */
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 16d8e43be7758..c730b2911418a 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -144,9 +144,17 @@ void __init check_bugs(void)
* have unknown values. AMD64_LS_CFG MSR is cached in the early AMD
* init code as it is not enumerated and depends on the family.
*/
- if (boot_cpu_has(X86_FEATURE_MSR_SPEC_CTRL))
+ if (cpu_feature_enabled(X86_FEATURE_MSR_SPEC_CTRL)) {
rdmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);
+ /*
+ * Previously running kernel (kexec), may have some controls
+ * turned ON. Clear them and let the mitigations setup below
+ * rediscover them based on configuration.
+ */
+ x86_spec_ctrl_base &= ~SPEC_CTRL_MITIGATIONS_MASK;
+ }
+
/* Select the proper CPU mitigations before patching alternatives: */
spectre_v1_select_mitigation();
spectre_v2_select_mitigation();
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 557/885] bpftool: Always disable stack protection for BPF objects
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (555 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 556/885] x86/bugs: Reset speculation control settings on init Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 558/885] wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds Greg Kroah-Hartman
` (330 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Holger Hoffstätte,
Daniel Borkmann, Quentin Monnet, Sasha Levin
From: Holger Hoffstätte <holger@applied-asynchrony.com>
[ Upstream commit 878625e1c7a10dfbb1fdaaaae2c4d2a58fbce627 ]
When the clang toolchain has stack protection enabled in order to be
consistent with gcc - which just happens to be the case on Gentoo -
the bpftool build fails:
[...]
clang \
-I. \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \
-g -O2 -Wall -target bpf -c skeleton/pid_iter.bpf.c -o pid_iter.bpf.o
clang \
-I. \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \
-g -O2 -Wall -target bpf -c skeleton/profiler.bpf.c -o profiler.bpf.o
skeleton/profiler.bpf.c:40:14: error: A call to built-in function '__stack_chk_fail' is not supported.
int BPF_PROG(fentry_XXX)
^
skeleton/profiler.bpf.c:94:14: error: A call to built-in function '__stack_chk_fail' is not supported.
int BPF_PROG(fexit_XXX)
^
2 errors generated.
[...]
Since stack-protector makes no sense for the BPF bits just unconditionally
disable it.
Bug: https://bugs.gentoo.org/890638
Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/74cd9d2e-6052-312a-241e-2b514a75c92c@applied-asynchrony.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/bpf/bpftool/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
index 4a95c017ad4ce..a3794b3416014 100644
--- a/tools/bpf/bpftool/Makefile
+++ b/tools/bpf/bpftool/Makefile
@@ -187,7 +187,8 @@ $(OUTPUT)%.bpf.o: skeleton/%.bpf.c $(OUTPUT)vmlinux.h $(LIBBPF_BOOTSTRAP)
-I$(or $(OUTPUT),.) \
-I$(srctree)/tools/include/uapi/ \
-I$(LIBBPF_BOOTSTRAP_INCLUDE) \
- -g -O2 -Wall -target bpf -c $< -o $@
+ -g -O2 -Wall -fno-stack-protector \
+ -target bpf -c $< -o $@
$(Q)$(LLVM_STRIP) -g $@
$(OUTPUT)%.skel.h: $(OUTPUT)%.bpf.o $(BPFTOOL_BOOTSTRAP)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 558/885] wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (556 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 557/885] bpftool: Always disable stack protection for BPF objects Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 559/885] wifi: mt7601u: fix an integer underflow Greg Kroah-Hartman
` (329 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arend van Spriel, Jisoo Jang,
Kalle Valo, Sasha Levin
From: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
[ Upstream commit 660145d708be52f946a82e5b633c020f58f996de ]
Fix a stack-out-of-bounds read in brcmfmac that occurs
when 'buf' that is not null-terminated is passed as an argument of
strreplace() in brcmf_c_preinit_dcmds(). This buffer is filled with
a CLM version string by memcpy() in brcmf_fil_iovar_data_get().
Ensure buf is null-terminated.
Found by a modified version of syzkaller.
[ 33.004414][ T1896] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 33.013486][ T1896] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43236/3 wl0: Nov 30 2011 17:33:42 version 5.90.188.22
[ 33.021554][ T1896] ==================================================================
[ 33.022379][ T1896] BUG: KASAN: stack-out-of-bounds in strreplace+0xf2/0x110
[ 33.023122][ T1896] Read of size 1 at addr ffffc90001d6efc8 by task kworker/0:2/1896
[ 33.023852][ T1896]
[ 33.024096][ T1896] CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132
[ 33.024927][ T1896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 33.026065][ T1896] Workqueue: usb_hub_wq hub_event
[ 33.026581][ T1896] Call Trace:
[ 33.026896][ T1896] dump_stack_lvl+0x57/0x7d
[ 33.027372][ T1896] print_address_description.constprop.0.cold+0xf/0x334
[ 33.028037][ T1896] ? strreplace+0xf2/0x110
[ 33.028403][ T1896] ? strreplace+0xf2/0x110
[ 33.028807][ T1896] kasan_report.cold+0x83/0xdf
[ 33.029283][ T1896] ? strreplace+0xf2/0x110
[ 33.029666][ T1896] strreplace+0xf2/0x110
[ 33.029966][ T1896] brcmf_c_preinit_dcmds+0xab1/0xc40
[ 33.030351][ T1896] ? brcmf_c_set_joinpref_default+0x100/0x100
[ 33.030787][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 33.031223][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 33.031661][ T1896] ? lock_acquire+0x19d/0x4e0
[ 33.032091][ T1896] ? find_held_lock+0x2d/0x110
[ 33.032605][ T1896] ? brcmf_usb_deq+0x1a7/0x260
[ 33.033087][ T1896] ? brcmf_usb_rx_fill_all+0x5a/0xf0
[ 33.033582][ T1896] brcmf_attach+0x246/0xd40
[ 33.034022][ T1896] ? wiphy_new_nm+0x1476/0x1d50
[ 33.034383][ T1896] ? kmemdup+0x30/0x40
[ 33.034722][ T1896] brcmf_usb_probe+0x12de/0x1690
[ 33.035223][ T1896] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
[ 33.035833][ T1896] usb_probe_interface+0x25f/0x710
[ 33.036315][ T1896] really_probe+0x1be/0xa90
[ 33.036656][ T1896] __driver_probe_device+0x2ab/0x460
[ 33.037026][ T1896] ? usb_match_id.part.0+0x88/0xc0
[ 33.037383][ T1896] driver_probe_device+0x49/0x120
[ 33.037790][ T1896] __device_attach_driver+0x18a/0x250
[ 33.038300][ T1896] ? driver_allows_async_probing+0x120/0x120
[ 33.038986][ T1896] bus_for_each_drv+0x123/0x1a0
[ 33.039906][ T1896] ? bus_rescan_devices+0x20/0x20
[ 33.041412][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 33.041861][ T1896] ? trace_hardirqs_on+0x1c/0x120
[ 33.042330][ T1896] __device_attach+0x207/0x330
[ 33.042664][ T1896] ? device_bind_driver+0xb0/0xb0
[ 33.043026][ T1896] ? kobject_uevent_env+0x230/0x12c0
[ 33.043515][ T1896] bus_probe_device+0x1a2/0x260
[ 33.043914][ T1896] device_add+0xa61/0x1ce0
[ 33.044227][ T1896] ? __mutex_unlock_slowpath+0xe7/0x660
[ 33.044891][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550
[ 33.045531][ T1896] usb_set_configuration+0x984/0x1770
[ 33.046051][ T1896] ? kernfs_create_link+0x175/0x230
[ 33.046548][ T1896] usb_generic_driver_probe+0x69/0x90
[ 33.046931][ T1896] usb_probe_device+0x9c/0x220
[ 33.047434][ T1896] really_probe+0x1be/0xa90
[ 33.047760][ T1896] __driver_probe_device+0x2ab/0x460
[ 33.048134][ T1896] driver_probe_device+0x49/0x120
[ 33.048516][ T1896] __device_attach_driver+0x18a/0x250
[ 33.048910][ T1896] ? driver_allows_async_probing+0x120/0x120
[ 33.049437][ T1896] bus_for_each_drv+0x123/0x1a0
[ 33.049814][ T1896] ? bus_rescan_devices+0x20/0x20
[ 33.050164][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 33.050579][ T1896] ? trace_hardirqs_on+0x1c/0x120
[ 33.050936][ T1896] __device_attach+0x207/0x330
[ 33.051399][ T1896] ? device_bind_driver+0xb0/0xb0
[ 33.051888][ T1896] ? kobject_uevent_env+0x230/0x12c0
[ 33.052314][ T1896] bus_probe_device+0x1a2/0x260
[ 33.052688][ T1896] device_add+0xa61/0x1ce0
[ 33.053121][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550
[ 33.053568][ T1896] usb_new_device.cold+0x463/0xf66
[ 33.053953][ T1896] ? hub_disconnect+0x400/0x400
[ 33.054313][ T1896] ? rwlock_bug.part.0+0x90/0x90
[ 33.054661][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 33.055094][ T1896] hub_event+0x10d5/0x3330
[ 33.055530][ T1896] ? hub_port_debounce+0x280/0x280
[ 33.055934][ T1896] ? __lock_acquire+0x1671/0x5790
[ 33.056387][ T1896] ? wq_calc_node_cpumask+0x170/0x2a0
[ 33.056924][ T1896] ? lock_release+0x640/0x640
[ 33.057383][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 33.057916][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 33.058402][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 33.059019][ T1896] process_one_work+0x873/0x13e0
[ 33.059488][ T1896] ? lock_release+0x640/0x640
[ 33.059932][ T1896] ? pwq_dec_nr_in_flight+0x320/0x320
[ 33.060446][ T1896] ? rwlock_bug.part.0+0x90/0x90
[ 33.060898][ T1896] worker_thread+0x8b/0xd10
[ 33.061348][ T1896] ? __kthread_parkme+0xd9/0x1d0
[ 33.061810][ T1896] ? process_one_work+0x13e0/0x13e0
[ 33.062288][ T1896] kthread+0x379/0x450
[ 33.062660][ T1896] ? _raw_spin_unlock_irq+0x24/0x30
[ 33.063148][ T1896] ? set_kthread_struct+0x100/0x100
[ 33.063606][ T1896] ret_from_fork+0x1f/0x30
[ 33.064070][ T1896]
[ 33.064313][ T1896]
[ 33.064545][ T1896] addr ffffc90001d6efc8 is located in stack of task kworker/0:2/1896 at offset 512 in frame:
[ 33.065478][ T1896] brcmf_c_preinit_dcmds+0x0/0xc40
[ 33.065973][ T1896]
[ 33.066191][ T1896] this frame has 4 objects:
[ 33.066614][ T1896] [48, 56) 'ptr'
[ 33.066618][ T1896] [80, 148) 'revinfo'
[ 33.066957][ T1896] [192, 210) 'eventmask'
[ 33.067338][ T1896] [256, 512) 'buf'
[ 33.067742][ T1896]
[ 33.068304][ T1896] Memory state around the buggy address:
[ 33.068838][ T1896] ffffc90001d6ee80: f2 00 00 02 f2 f2 f2 f2 f2 00 00 00 00 00 00 00
[ 33.069545][ T1896] ffffc90001d6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 33.070626][ T1896] >ffffc90001d6ef80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3
[ 33.072052][ T1896] ^
[ 33.073043][ T1896] ffffc90001d6f000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 33.074230][ T1896] ffffc90001d6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 33.074914][ T1896] ==================================================================
[ 33.075713][ T1896] Disabling lock debugging due to kernel taint
Reviewed-by: Arend van Spriel<arend.vanspriel@broadcom.com>
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221230075139.56591-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index 789930806d03a..fc5232a896535 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -319,15 +319,17 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
if (err) {
brcmf_dbg(TRACE, "retrieving clmver failed, %d\n", err);
} else {
+ buf[sizeof(buf) - 1] = '\0';
clmver = (char *)buf;
- /* store CLM version for adding it to revinfo debugfs file */
- memcpy(ifp->drvr->clmver, clmver, sizeof(ifp->drvr->clmver));
/* Replace all newline/linefeed characters with space
* character
*/
strreplace(clmver, '\n', ' ');
+ /* store CLM version for adding it to revinfo debugfs file */
+ memcpy(ifp->drvr->clmver, clmver, sizeof(ifp->drvr->clmver));
+
brcmf_dbg(INFO, "CLM version = %s\n", clmver);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 559/885] wifi: mt7601u: fix an integer underflow
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (557 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 558/885] wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 560/885] inet: fix fast path in __inet_hash_connect() Greg Kroah-Hartman
` (328 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jisoo Jang, Jakub Kicinski,
Kalle Valo, Sasha Levin
From: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
[ Upstream commit 803f3176c5df3b5582c27ea690f204abb60b19b9 ]
Fix an integer underflow that leads to a null pointer dereference in
'mt7601u_rx_skb_from_seg()'. The variable 'dma_len' in the URB packet
could be manipulated, which could trigger an integer underflow of
'seg_len' in 'mt7601u_rx_process_seg()'. This underflow subsequently
causes the 'bad_frame' checks in 'mt7601u_rx_skb_from_seg()' to be
bypassed, eventually leading to a dereference of the pointer 'p', which
is a null pointer.
Ensure that 'dma_len' is greater than 'min_seg_len'.
Found by a modified version of syzkaller.
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 12 Comm: ksoftirqd/0 Tainted: G W O 5.14.0+
#139
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_add_rx_frag+0x143/0x370
Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44
89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00
RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8
RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010
R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000
R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008
FS: 0000000000000000(0000) GS:ffff88811a800000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
mt7601u_rx_tasklet+0xc73/0x1270
? mt7601u_submit_rx_buf.isra.0+0x510/0x510
? tasklet_action_common.isra.0+0x79/0x2f0
tasklet_action_common.isra.0+0x206/0x2f0
__do_softirq+0x1b5/0x880
? tasklet_unlock+0x30/0x30
run_ksoftirqd+0x26/0x50
smpboot_thread_fn+0x34f/0x7d0
? smpboot_register_percpu_thread+0x370/0x370
kthread+0x3a1/0x480
? set_kthread_struct+0x120/0x120
ret_from_fork+0x1f/0x30
Modules linked in: 88XXau(O) 88x2bu(O)
---[ end trace 57f34f93b4da0f9b ]---
RIP: 0010:skb_add_rx_frag+0x143/0x370
Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44
89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00
RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8
RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010
R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000
R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008
FS: 0000000000000000(0000) GS:ffff88811a800000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221229092906.2328282-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt7601u/dma.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c
index 457147394edc4..773a1cc2f8520 100644
--- a/drivers/net/wireless/mediatek/mt7601u/dma.c
+++ b/drivers/net/wireless/mediatek/mt7601u/dma.c
@@ -123,7 +123,8 @@ static u16 mt7601u_rx_next_seg_len(u8 *data, u32 data_len)
if (data_len < min_seg_len ||
WARN_ON_ONCE(!dma_len) ||
WARN_ON_ONCE(dma_len + MT_DMA_HDRS > data_len) ||
- WARN_ON_ONCE(dma_len & 0x3))
+ WARN_ON_ONCE(dma_len & 0x3) ||
+ WARN_ON_ONCE(dma_len < min_seg_len))
return 0;
return MT_DMA_HDRS + dma_len;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 560/885] inet: fix fast path in __inet_hash_connect()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (558 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 559/885] wifi: mt7601u: fix an integer underflow Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 561/885] ice: restrict PTP HW clock freq adjustments to 100, 000, 000 PPB Greg Kroah-Hartman
` (327 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pietro Borrello, Kuniyuki Iwashima,
Eric Dumazet, Paolo Abeni, Sasha Levin
From: Pietro Borrello <borrello@diag.uniroma1.it>
[ Upstream commit 21cbd90a6fab7123905386985e3e4a80236b8714 ]
__inet_hash_connect() has a fast path taken if sk_head(&tb->owners) is
equal to the sk parameter.
sk_head() returns the hlist_entry() with respect to the sk_node field.
However entries in the tb->owners list are inserted with respect to the
sk_bind_node field with sk_add_bind_node().
Thus the check would never pass and the fast path never execute.
This fast path has never been executed or tested as this bug seems
to be present since commit 1da177e4c3f4 ("Linux-2.6.12-rc2"), thus
remove it to reduce code complexity.
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230112-inet_hash_connect_bind_head-v3-1-b591fd212b93@diag.uniroma1.it
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/inet_hashtables.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index a5711b8f4cb19..cd8b2f7a8f341 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -1008,17 +1008,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
u32 index;
if (port) {
- head = &hinfo->bhash[inet_bhashfn(net, port,
- hinfo->bhash_size)];
- tb = inet_csk(sk)->icsk_bind_hash;
- spin_lock_bh(&head->lock);
- if (sk_head(&tb->owners) == sk && !sk->sk_bind_node.next) {
- inet_ehash_nolisten(sk, NULL, NULL);
- spin_unlock_bh(&head->lock);
- return 0;
- }
- spin_unlock(&head->lock);
- /* No definite answer... Walk to established hash table */
+ local_bh_disable();
ret = check_established(death_row, sk, port, NULL);
local_bh_enable();
return ret;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 561/885] ice: restrict PTP HW clock freq adjustments to 100, 000, 000 PPB
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (559 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 560/885] inet: fix fast path in __inet_hash_connect() Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 562/885] ice: add missing checks for PF vsi type Greg Kroah-Hartman
` (326 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Siddaraju DH, Tony Nguyen,
Sasha Levin, Gurucharan G
From: Siddaraju DH <siddaraju.dh@intel.com>
[ Upstream commit 8aa4318c3a122b8670bc09af142de3872ca63b88 ]
The PHY provides only 39b timestamp. With current timing
implementation, we discard lower 7b, leaving 32b timestamp.
The driver reconstructs the full 64b timestamp by correlating the
32b timestamp with cached_time for performance. The reconstruction
algorithm does both forward & backward interpolation.
The 32b timeval has overflow duration of 2^32 counts ~= 4.23 second.
Due to interpolation in both direction, its now ~= 2.125 second
IIRC, going with at least half a duration, the cached_time is updated
with periodic thread of 1 second (worst-case) periodicity.
But the 1 second periodicity is based on System-timer.
With PPB adjustments, if the 1588 timers increments at say
double the rate, (2s in-place of 1s), the Nyquist rate/half duration
sampling/update of cached_time with 1 second periodic thread will
lead to incorrect interpolations.
Hence we should restrict the PPB adjustments to at least half duration
of cached_time update which translates to 500,000,000 PPB.
Since the periodicity of the cached-time system thread can vary,
it is good to have some buffer time and considering practicality of
PPB adjustments, limiting the max_adj to 100,000,000.
Signed-off-by: Siddaraju DH <siddaraju.dh@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ice/ice_ptp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index 53fec5bbe6e00..a3585ede829bb 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -2293,7 +2293,7 @@ static void ice_ptp_set_caps(struct ice_pf *pf)
snprintf(info->name, sizeof(info->name) - 1, "%s-%s-clk",
dev_driver_string(dev), dev_name(dev));
info->owner = THIS_MODULE;
- info->max_adj = 999999999;
+ info->max_adj = 100000000;
info->adjtime = ice_ptp_adjtime;
info->adjfine = ice_ptp_adjfine;
info->gettimex64 = ice_ptp_gettimex64;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 562/885] ice: add missing checks for PF vsi type
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (560 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 561/885] ice: restrict PTP HW clock freq adjustments to 100, 000, 000 PPB Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 563/885] ACPI: Dont build ACPICA with -Os Greg Kroah-Hartman
` (325 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jesse Brandeburg, Tony Nguyen,
Sasha Levin, Gurucharan G
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
[ Upstream commit 6a8d013e904ad9a66706fcc926ec9993bed7d190 ]
There were a few places we had missed checking the VSI type to make sure
it was definitely a PF VSI, before calling setup functions intended only
for the PF VSI.
This doesn't fix any explicit bugs but cleans up the code in a few
places and removes one explicit != vsi->type check that can be
superseded by this code (it's a super set)
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ice/ice_main.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 72f97bb50b09c..3c6bb3f9ac780 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -6159,15 +6159,12 @@ int ice_vsi_cfg(struct ice_vsi *vsi)
{
int err;
- if (vsi->netdev) {
+ if (vsi->netdev && vsi->type == ICE_VSI_PF) {
ice_set_rx_mode(vsi->netdev);
- if (vsi->type != ICE_VSI_LB) {
- err = ice_vsi_vlan_setup(vsi);
-
- if (err)
- return err;
- }
+ err = ice_vsi_vlan_setup(vsi);
+ if (err)
+ return err;
}
ice_vsi_cfg_dcb_rings(vsi);
@@ -6348,7 +6345,7 @@ static int ice_up_complete(struct ice_vsi *vsi)
if (vsi->port_info &&
(vsi->port_info->phy.link_info.link_info & ICE_AQ_LINK_UP) &&
- vsi->netdev) {
+ vsi->netdev && vsi->type == ICE_VSI_PF) {
ice_print_link_msg(vsi, true);
netif_tx_start_all_queues(vsi->netdev);
netif_carrier_on(vsi->netdev);
@@ -6360,7 +6357,9 @@ static int ice_up_complete(struct ice_vsi *vsi)
* set the baseline so counters are ready when interface is up
*/
ice_update_eth_stats(vsi);
- ice_service_task_schedule(pf);
+
+ if (vsi->type == ICE_VSI_PF)
+ ice_service_task_schedule(pf);
return 0;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 563/885] ACPI: Dont build ACPICA with -Os
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (561 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 562/885] ice: add missing checks for PF vsi type Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 564/885] bpf, docs: Fix modulo zero, division by zero, overflow, and underflow Greg Kroah-Hartman
` (324 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mark Rutland, Rafael J. Wysocki,
Florent Revest, Len Brown, Masami Hiramatsu, Peter Zijlstra,
Robert Moore, Steven Rostedt, Will Deacon, linux-acpi,
Catalin Marinas, Sasha Levin
From: Mark Rutland <mark.rutland@arm.com>
[ Upstream commit 8f9e0a52810dd83406c768972d022c37e7a18f1f ]
The ACPICA code has been built with '-Os' since the beginning of git
history, though there's no explanatory comment as to why.
This is unfortunate as GCC drops the alignment specificed by
'-falign-functions=N' when '-Os' is used, as reported in GCC bug 88345:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88345
This prevents CONFIG_FUNCTION_ALIGNMENT and
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B from having their expected effect
on the ACPICA code. This is doubly unfortunate as in subsequent patches
arm64 will depend upon CONFIG_FUNCTION_ALIGNMENT for its ftrace
implementation.
Drop the '-Os' flag when building the ACPICA code. With this removed,
the code builds cleanly and works correctly in testing so far.
I've tested this by selecting CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y,
building and booting a kernel using ACPI, and looking for misaligned
text symbols:
* arm64:
Before, v6.2-rc3:
# uname -rm
6.2.0-rc3 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
5009
Before, v6.2-rc3 + fixed __cold:
# uname -rm
6.2.0-rc3-00001-g2a2bedf8bfa9 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
919
After:
# uname -rm
6.2.0-rc3-00002-g267bddc38572 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
323
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep acpi | wc -l
0
* x86_64:
Before, v6.2-rc3:
# uname -rm
6.2.0-rc3 x86_64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
11537
Before, v6.2-rc3 + fixed __cold:
# uname -rm
6.2.0-rc3-00001-g2a2bedf8bfa9 x86_64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
2805
After:
# uname -rm
6.2.0-rc3-00002-g267bddc38572 x86_64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
1357
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep acpi | wc -l
0
With the patch applied, the remaining unaligned text labels are a
combination of static call trampolines and labels in assembly, which can
be dealt with in subsequent patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-acpi@vger.kernel.org
Link: https://lore.kernel.org/r/20230123134603.1064407-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/acpica/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 59700433a96e5..f919811156b1f 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -3,7 +3,7 @@
# Makefile for ACPICA Core interpreter
#
-ccflags-y := -Os -D_LINUX -DBUILDING_ACPICA
+ccflags-y := -D_LINUX -DBUILDING_ACPICA
ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
# use acpi.o to put all files here into acpi.o modparam namespace
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 564/885] bpf, docs: Fix modulo zero, division by zero, overflow, and underflow
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (562 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 563/885] ACPI: Dont build ACPICA with -Os Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 565/885] thermal: intel: intel_pch: Add support for Wellsburg PCH Greg Kroah-Hartman
` (323 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dave Thaler, Daniel Borkmann, Sasha Levin
From: Dave Thaler <dthaler@microsoft.com>
[ Upstream commit 0eb9d19e2201068260e439a5c96dc85f9f3722a2 ]
Fix modulo zero, division by zero, overflow, and underflow. Also clarify how
a negative immediate value is used in unsigned division.
Signed-off-by: Dave Thaler <dthaler@microsoft.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230124001218.827-1-dthaler1968@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/bpf/instruction-set.rst | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/Documentation/bpf/instruction-set.rst b/Documentation/bpf/instruction-set.rst
index 5d798437dad47..3ba6475cfbfc7 100644
--- a/Documentation/bpf/instruction-set.rst
+++ b/Documentation/bpf/instruction-set.rst
@@ -99,19 +99,26 @@ code value description
BPF_ADD 0x00 dst += src
BPF_SUB 0x10 dst -= src
BPF_MUL 0x20 dst \*= src
-BPF_DIV 0x30 dst /= src
+BPF_DIV 0x30 dst = (src != 0) ? (dst / src) : 0
BPF_OR 0x40 dst \|= src
BPF_AND 0x50 dst &= src
BPF_LSH 0x60 dst <<= src
BPF_RSH 0x70 dst >>= src
BPF_NEG 0x80 dst = ~src
-BPF_MOD 0x90 dst %= src
+BPF_MOD 0x90 dst = (src != 0) ? (dst % src) : dst
BPF_XOR 0xa0 dst ^= src
BPF_MOV 0xb0 dst = src
BPF_ARSH 0xc0 sign extending shift right
BPF_END 0xd0 byte swap operations (see `Byte swap instructions`_ below)
======== ===== ==========================================================
+Underflow and overflow are allowed during arithmetic operations, meaning
+the 64-bit or 32-bit value will wrap. If eBPF program execution would
+result in division by zero, the destination register is instead set to zero.
+If execution would result in modulo by zero, for ``BPF_ALU64`` the value of
+the destination register is unchanged whereas for ``BPF_ALU`` the upper
+32 bits of the destination register are zeroed.
+
``BPF_ADD | BPF_X | BPF_ALU`` means::
dst_reg = (u32) dst_reg + (u32) src_reg;
@@ -128,6 +135,11 @@ BPF_END 0xd0 byte swap operations (see `Byte swap instructions`_ below)
src_reg = src_reg ^ imm32
+Also note that the division and modulo operations are unsigned. Thus, for
+``BPF_ALU``, 'imm' is first interpreted as an unsigned 32-bit value, whereas
+for ``BPF_ALU64``, 'imm' is first sign extended to 64 bits and the result
+interpreted as an unsigned 64-bit value. There are no instructions for
+signed division or modulo.
Byte swap instructions
~~~~~~~~~~~~~~~~~~~~~~
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 565/885] thermal: intel: intel_pch: Add support for Wellsburg PCH
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (563 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 564/885] bpf, docs: Fix modulo zero, division by zero, overflow, and underflow Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 566/885] clocksource: Suspend the watchdog temporarily when high read latency detected Greg Kroah-Hartman
` (322 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tim Zimmermann, Rafael J. Wysocki,
Sasha Levin
From: Tim Zimmermann <tim@linux4.de>
[ Upstream commit 40dc1929089fc844ea06d9f8bdb6211ed4517c2e ]
Add the PCI ID for the Wellsburg C610 series chipset PCH.
The driver can read the temperature from the Wellsburg PCH with only
the PCI ID added and no other modifications.
Signed-off-by: Tim Zimmermann <tim@linux4.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/intel/intel_pch_thermal.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c
index dabf11a687a15..9e27f430e0345 100644
--- a/drivers/thermal/intel/intel_pch_thermal.c
+++ b/drivers/thermal/intel/intel_pch_thermal.c
@@ -29,6 +29,7 @@
#define PCH_THERMAL_DID_CNL_LP 0x02F9 /* CNL-LP PCH */
#define PCH_THERMAL_DID_CML_H 0X06F9 /* CML-H PCH */
#define PCH_THERMAL_DID_LWB 0xA1B1 /* Lewisburg PCH */
+#define PCH_THERMAL_DID_WBG 0x8D24 /* Wellsburg PCH */
/* Wildcat Point-LP PCH Thermal registers */
#define WPT_TEMP 0x0000 /* Temperature */
@@ -350,6 +351,7 @@ enum board_ids {
board_cnl,
board_cml,
board_lwb,
+ board_wbg,
};
static const struct board_info {
@@ -380,6 +382,10 @@ static const struct board_info {
.name = "pch_lewisburg",
.ops = &pch_dev_ops_wpt,
},
+ [board_wbg] = {
+ .name = "pch_wellsburg",
+ .ops = &pch_dev_ops_wpt,
+ },
};
static int intel_pch_thermal_probe(struct pci_dev *pdev,
@@ -495,6 +501,8 @@ static const struct pci_device_id intel_pch_thermal_id[] = {
.driver_data = board_cml, },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_LWB),
.driver_data = board_lwb, },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WBG),
+ .driver_data = board_wbg, },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 566/885] clocksource: Suspend the watchdog temporarily when high read latency detected
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (564 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 565/885] thermal: intel: intel_pch: Add support for Wellsburg PCH Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 567/885] crypto: hisilicon: Wipe entire pool on error Greg Kroah-Hartman
` (321 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Feng Tang, Waiman Long, John Stultz,
Thomas Gleixner, Stephen Boyd, Paul E. McKenney, Sasha Levin
From: Feng Tang <feng.tang@intel.com>
[ Upstream commit b7082cdfc464bf9231300605d03eebf943dda307 ]
Bugs have been reported on 8 sockets x86 machines in which the TSC was
wrongly disabled when the system is under heavy workload.
[ 818.380354] clocksource: timekeeping watchdog on CPU336: hpet wd-wd read-back delay of 1203520ns
[ 818.436160] clocksource: wd-tsc-wd read-back delay of 181880ns, clock-skew test skipped!
[ 819.402962] clocksource: timekeeping watchdog on CPU338: hpet wd-wd read-back delay of 324000ns
[ 819.448036] clocksource: wd-tsc-wd read-back delay of 337240ns, clock-skew test skipped!
[ 819.880863] clocksource: timekeeping watchdog on CPU339: hpet read-back delay of 150280ns, attempt 3, marking unstable
[ 819.936243] tsc: Marking TSC unstable due to clocksource watchdog
[ 820.068173] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 820.092382] sched_clock: Marking unstable (818769414384, 1195404998)
[ 820.643627] clocksource: Checking clocksource tsc synchronization from CPU 267 to CPUs 0,4,25,70,126,430,557,564.
[ 821.067990] clocksource: Switched to clocksource hpet
This can be reproduced by running memory intensive 'stream' tests,
or some of the stress-ng subcases such as 'ioport'.
The reason for these issues is the when system is under heavy load, the
read latency of the clocksources can be very high. Even lightweight TSC
reads can show high latencies, and latencies are much worse for external
clocksources such as HPET or the APIC PM timer. These latencies can
result in false-positive clocksource-unstable determinations.
These issues were initially reported by a customer running on a production
system, and this problem was reproduced on several generations of Xeon
servers, especially when running the stress-ng test. These Xeon servers
were not production systems, but they did have the latest steppings
and firmware.
Given that the clocksource watchdog is a continual diagnostic check with
frequency of twice a second, there is no need to rush it when the system
is under heavy load. Therefore, when high clocksource read latencies
are detected, suspend the watchdog timer for 5 minutes.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/time/clocksource.c | 45 ++++++++++++++++++++++++++++-----------
1 file changed, 32 insertions(+), 13 deletions(-)
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 8058bec87acee..1c90e710d537f 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -384,6 +384,15 @@ void clocksource_verify_percpu(struct clocksource *cs)
}
EXPORT_SYMBOL_GPL(clocksource_verify_percpu);
+static inline void clocksource_reset_watchdog(void)
+{
+ struct clocksource *cs;
+
+ list_for_each_entry(cs, &watchdog_list, wd_list)
+ cs->flags &= ~CLOCK_SOURCE_WATCHDOG;
+}
+
+
static void clocksource_watchdog(struct timer_list *unused)
{
u64 csnow, wdnow, cslast, wdlast, delta;
@@ -391,6 +400,7 @@ static void clocksource_watchdog(struct timer_list *unused)
int64_t wd_nsec, cs_nsec;
struct clocksource *cs;
enum wd_read_status read_ret;
+ unsigned long extra_wait = 0;
u32 md;
spin_lock(&watchdog_lock);
@@ -410,13 +420,30 @@ static void clocksource_watchdog(struct timer_list *unused)
read_ret = cs_watchdog_read(cs, &csnow, &wdnow);
- if (read_ret != WD_READ_SUCCESS) {
- if (read_ret == WD_READ_UNSTABLE)
- /* Clock readout unreliable, so give it up. */
- __clocksource_unstable(cs);
+ if (read_ret == WD_READ_UNSTABLE) {
+ /* Clock readout unreliable, so give it up. */
+ __clocksource_unstable(cs);
continue;
}
+ /*
+ * When WD_READ_SKIP is returned, it means the system is likely
+ * under very heavy load, where the latency of reading
+ * watchdog/clocksource is very big, and affect the accuracy of
+ * watchdog check. So give system some space and suspend the
+ * watchdog check for 5 minutes.
+ */
+ if (read_ret == WD_READ_SKIP) {
+ /*
+ * As the watchdog timer will be suspended, and
+ * cs->last could keep unchanged for 5 minutes, reset
+ * the counters.
+ */
+ clocksource_reset_watchdog();
+ extra_wait = HZ * 300;
+ break;
+ }
+
/* Clocksource initialized ? */
if (!(cs->flags & CLOCK_SOURCE_WATCHDOG) ||
atomic_read(&watchdog_reset_pending)) {
@@ -512,7 +539,7 @@ static void clocksource_watchdog(struct timer_list *unused)
* pair clocksource_stop_watchdog() clocksource_start_watchdog().
*/
if (!timer_pending(&watchdog_timer)) {
- watchdog_timer.expires += WATCHDOG_INTERVAL;
+ watchdog_timer.expires += WATCHDOG_INTERVAL + extra_wait;
add_timer_on(&watchdog_timer, next_cpu);
}
out:
@@ -537,14 +564,6 @@ static inline void clocksource_stop_watchdog(void)
watchdog_running = 0;
}
-static inline void clocksource_reset_watchdog(void)
-{
- struct clocksource *cs;
-
- list_for_each_entry(cs, &watchdog_list, wd_list)
- cs->flags &= ~CLOCK_SOURCE_WATCHDOG;
-}
-
static void clocksource_resume_watchdog(void)
{
atomic_inc(&watchdog_reset_pending);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 567/885] crypto: hisilicon: Wipe entire pool on error
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (565 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 566/885] clocksource: Suspend the watchdog temporarily when high read latency detected Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 568/885] net: bcmgenet: Add a check for oversized packets Greg Kroah-Hartman
` (320 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nathan Chancellor, Weili Qian,
Zhou Wang, Herbert Xu, David S. Miller, linux-crypto, Kees Cook,
Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit aa85923a954e7704bc9d3847dabeb8540aa98d13 ]
To work around a Clang __builtin_object_size bug that shows up under
CONFIG_FORTIFY_SOURCE and UBSAN_BOUNDS, move the per-loop-iteration
mem_block wipe into a single wipe of the entire pool structure after
the loop.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1780
Cc: Weili Qian <qianweili@huawei.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Link: https://lore.kernel.org/r/20230106041945.never.831-kees@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/hisilicon/sgl.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/crypto/hisilicon/sgl.c b/drivers/crypto/hisilicon/sgl.c
index 2b6f2281cfd6c..0974b00414050 100644
--- a/drivers/crypto/hisilicon/sgl.c
+++ b/drivers/crypto/hisilicon/sgl.c
@@ -124,9 +124,8 @@ struct hisi_acc_sgl_pool *hisi_acc_create_sgl_pool(struct device *dev,
for (j = 0; j < i; j++) {
dma_free_coherent(dev, block_size, block[j].sgl,
block[j].sgl_dma);
- memset(block + j, 0, sizeof(*block));
}
- kfree(pool);
+ kfree_sensitive(pool);
return ERR_PTR(-ENOMEM);
}
EXPORT_SYMBOL_GPL(hisi_acc_create_sgl_pool);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 568/885] net: bcmgenet: Add a check for oversized packets
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (566 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 567/885] crypto: hisilicon: Wipe entire pool on error Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 569/885] m68k: Check syscall_trace_enter() return code Greg Kroah-Hartman
` (319 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Florian Fainelli, David S. Miller,
Sasha Levin
From: Florian Fainelli <f.fainelli@gmail.com>
[ Upstream commit 5c0862c2c962052ed5055220a00ac1cefb92fbcd ]
Occasionnaly we may get oversized packets from the hardware which
exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early
check which drops the packet to avoid invoking skb_over_panic() and move
on to processing the next packet.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 25c4506069856..f679ed54b3ef2 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2311,6 +2311,14 @@ static unsigned int bcmgenet_desc_rx(struct bcmgenet_rx_ring *ring,
__func__, p_index, ring->c_index,
ring->read_ptr, dma_length_status);
+ if (unlikely(len > RX_BUF_LENGTH)) {
+ netif_err(priv, rx_status, dev, "oversized packet\n");
+ dev->stats.rx_length_errors++;
+ dev->stats.rx_errors++;
+ dev_kfree_skb_any(skb);
+ goto next;
+ }
+
if (unlikely(!(dma_flag & DMA_EOP) || !(dma_flag & DMA_SOP))) {
netif_err(priv, rx_status, dev,
"dropping fragmented packet!\n");
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 569/885] m68k: Check syscall_trace_enter() return code
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (567 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 568/885] net: bcmgenet: Add a check for oversized packets Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 570/885] s390/mm,ptdump: avoid Kasan vs Memcpy Real markers swapping Greg Kroah-Hartman
` (318 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michael Schmitz, Geert Uytterhoeven,
Sasha Levin
From: Michael Schmitz <schmitzmic@gmail.com>
[ Upstream commit 2ca8a1de4437f21562e57f9ac123914747a8e7a1 ]
Check return code of syscall_trace_enter(), and skip syscall
if -1. Return code will be left at what had been set by
ptrace or seccomp (in regs->d0).
No regression seen in testing with strace on ARAnyM.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230112035529.13521-2-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/m68k/68000/entry.S | 2 ++
arch/m68k/coldfire/entry.S | 2 ++
arch/m68k/kernel/entry.S | 3 +++
3 files changed, 7 insertions(+)
diff --git a/arch/m68k/68000/entry.S b/arch/m68k/68000/entry.S
index 997b549330156..7d63e2f1555a0 100644
--- a/arch/m68k/68000/entry.S
+++ b/arch/m68k/68000/entry.S
@@ -45,6 +45,8 @@ do_trace:
jbsr syscall_trace_enter
RESTORE_SWITCH_STACK
addql #4,%sp
+ addql #1,%d0
+ jeq ret_from_exception
movel %sp@(PT_OFF_ORIG_D0),%d1
movel #-ENOSYS,%d0
cmpl #NR_syscalls,%d1
diff --git a/arch/m68k/coldfire/entry.S b/arch/m68k/coldfire/entry.S
index 9f337c70243a3..35104c5417ff4 100644
--- a/arch/m68k/coldfire/entry.S
+++ b/arch/m68k/coldfire/entry.S
@@ -90,6 +90,8 @@ ENTRY(system_call)
jbsr syscall_trace_enter
RESTORE_SWITCH_STACK
addql #4,%sp
+ addql #1,%d0
+ jeq ret_from_exception
movel %d3,%a0
jbsr %a0@
movel %d0,%sp@(PT_OFF_D0) /* save the return value */
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 18f278bdbd218..42879e6eb651d 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -184,9 +184,12 @@ do_trace_entry:
jbsr syscall_trace_enter
RESTORE_SWITCH_STACK
addql #4,%sp
+ addql #1,%d0 | optimization for cmpil #-1,%d0
+ jeq ret_from_syscall
movel %sp@(PT_OFF_ORIG_D0),%d0
cmpl #NR_syscalls,%d0
jcs syscall
+ jra ret_from_syscall
badsys:
movel #-ENOSYS,%sp@(PT_OFF_D0)
jra ret_from_syscall
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 570/885] s390/mm,ptdump: avoid Kasan vs Memcpy Real markers swapping
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (568 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 569/885] m68k: Check syscall_trace_enter() return code Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 571/885] netfilter: nf_tables: NULL pointer dereference in nf_tables_updobj() Greg Kroah-Hartman
` (317 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexander Gordeev, Vasily Gorbik,
Heiko Carstens, Sasha Levin
From: Vasily Gorbik <gor@linux.ibm.com>
[ Upstream commit 05178996e1a77e2a4664536e6d101a086a905034 ]
---[ Real Memory Copy Area Start ]---
0x001bfffffffff000-0x001c000000000000 4K PTE I
---[ Kasan Shadow Start ]---
---[ Real Memory Copy Area End ]---
0x001c000000000000-0x001c000200000000 8G PMD RW NX
...
---[ Kasan Shadow End ]---
ptdump does a stable sort of markers. Move kasan markers after
memcpy real to avoid swapping.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/mm/dump_pagetables.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/s390/mm/dump_pagetables.c b/arch/s390/mm/dump_pagetables.c
index 9953819d79596..ba5f802688781 100644
--- a/arch/s390/mm/dump_pagetables.c
+++ b/arch/s390/mm/dump_pagetables.c
@@ -33,10 +33,6 @@ enum address_markers_idx {
#endif
IDENTITY_AFTER_NR,
IDENTITY_AFTER_END_NR,
-#ifdef CONFIG_KASAN
- KASAN_SHADOW_START_NR,
- KASAN_SHADOW_END_NR,
-#endif
VMEMMAP_NR,
VMEMMAP_END_NR,
VMALLOC_NR,
@@ -47,6 +43,10 @@ enum address_markers_idx {
ABS_LOWCORE_END_NR,
MEMCPY_REAL_NR,
MEMCPY_REAL_END_NR,
+#ifdef CONFIG_KASAN
+ KASAN_SHADOW_START_NR,
+ KASAN_SHADOW_END_NR,
+#endif
};
static struct addr_marker address_markers[] = {
@@ -62,10 +62,6 @@ static struct addr_marker address_markers[] = {
#endif
[IDENTITY_AFTER_NR] = {(unsigned long)_end, "Identity Mapping Start"},
[IDENTITY_AFTER_END_NR] = {0, "Identity Mapping End"},
-#ifdef CONFIG_KASAN
- [KASAN_SHADOW_START_NR] = {KASAN_SHADOW_START, "Kasan Shadow Start"},
- [KASAN_SHADOW_END_NR] = {KASAN_SHADOW_END, "Kasan Shadow End"},
-#endif
[VMEMMAP_NR] = {0, "vmemmap Area Start"},
[VMEMMAP_END_NR] = {0, "vmemmap Area End"},
[VMALLOC_NR] = {0, "vmalloc Area Start"},
@@ -76,6 +72,10 @@ static struct addr_marker address_markers[] = {
[ABS_LOWCORE_END_NR] = {0, "Lowcore Area End"},
[MEMCPY_REAL_NR] = {0, "Real Memory Copy Area Start"},
[MEMCPY_REAL_END_NR] = {0, "Real Memory Copy Area End"},
+#ifdef CONFIG_KASAN
+ [KASAN_SHADOW_START_NR] = {KASAN_SHADOW_START, "Kasan Shadow Start"},
+ [KASAN_SHADOW_END_NR] = {KASAN_SHADOW_END, "Kasan Shadow End"},
+#endif
{ -1, NULL }
};
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 571/885] netfilter: nf_tables: NULL pointer dereference in nf_tables_updobj()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (569 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 570/885] s390/mm,ptdump: avoid Kasan vs Memcpy Real markers swapping Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 572/885] can: isotp: check CAN address family in isotp_bind() Greg Kroah-Hartman
` (316 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alok Tiwari, Pablo Neira Ayuso, Sasha Levin
From: Alok Tiwari <alok.a.tiwari@oracle.com>
[ Upstream commit dac7f50a45216d652887fb92d6cd3b7ca7f006ea ]
static analyzer detect null pointer dereference case for 'type'
function __nft_obj_type_get() can return NULL value which require to handle
if type is NULL pointer return -ENOENT.
This is a theoretical issue, since an existing object has a type, but
better add this failsafe check.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_tables_api.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 3ba8c291fcaa7..dca5352bdf3d7 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -6951,6 +6951,9 @@ static int nf_tables_newobj(struct sk_buff *skb, const struct nfnl_info *info,
return -EOPNOTSUPP;
type = __nft_obj_type_get(objtype);
+ if (WARN_ON_ONCE(!type))
+ return -ENOENT;
+
nft_ctx_init(&ctx, net, skb, info->nlh, family, table, NULL, nla);
return nf_tables_updobj(&ctx, type, nla[NFTA_OBJ_DATA], obj);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 572/885] can: isotp: check CAN address family in isotp_bind()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (570 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 571/885] netfilter: nf_tables: NULL pointer dereference in nf_tables_updobj() Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 573/885] gcc-plugins: drop -std=gnu++11 to fix GCC 13 build Greg Kroah-Hartman
` (315 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+5aed6c3aaba661f5b917,
Oliver Hartkopp, Marc Kleine-Budde, Sasha Levin
From: Oliver Hartkopp <socketcan@hartkopp.net>
[ Upstream commit c6adf659a8ba85913e16a571d5a9bcd17d3d1234 ]
Add missing check to block non-AF_CAN binds.
Syzbot created some code which matched the right sockaddr struct size
but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family
field:
bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10)
^^^^
This has no funtional impact but the userspace should be notified about
the wrong address family field content.
Link: https://syzkaller.appspot.com/text?tag=CrashLog&x=11ff9d8c480000
Reported-by: syzbot+5aed6c3aaba661f5b917@syzkaller.appspotmail.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230104201844.13168-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/can/isotp.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/can/isotp.c b/net/can/isotp.c
index fc81d77724a13..9bc344851704e 100644
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1220,6 +1220,9 @@ static int isotp_bind(struct socket *sock, struct sockaddr *uaddr, int len)
if (len < ISOTP_MIN_NAMELEN)
return -EINVAL;
+ if (addr->can_family != AF_CAN)
+ return -EINVAL;
+
/* sanitize tx CAN identifier */
if (tx_id & CAN_EFF_FLAG)
tx_id &= (CAN_EFF_FLAG | CAN_EFF_MASK);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 573/885] gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (571 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 572/885] can: isotp: check CAN address family in isotp_bind() Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 574/885] tools/power/x86/intel-speed-select: Add Emerald Rapid quirk Greg Kroah-Hartman
` (314 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Sam James, Kees Cook, Sasha Levin
From: Sam James <sam@gentoo.org>
[ Upstream commit 5a6b64adc18d9adfb497a529ff004d59b6df151f ]
The latest GCC 13 snapshot (13.0.1 20230129) gives the following:
```
cc1: error: cannot load plugin ./scripts/gcc-plugins/randomize_layout_plugin.so
:./scripts/gcc-plugins/randomize_layout_plugin.so: undefined symbol: tree_code_type
```
This ends up being because of https://gcc.gnu.org/git/gitweb.cgi?p=gcc.git;h=b0241ce6e37031
upstream in GCC which changes the visibility of some types used by the kernel's
plugin infrastructure like tree_code_type.
After discussion with the GCC folks, we found that the kernel needs to be building
plugins with the same flags used to build GCC - and GCC defaults to gnu++17
right now. The minimum GCC version needed to build the kernel is GCC 5.1
and GCC 5.1 already defaults to gnu++14 anyway, so just drop the flag, as
all GCCs that could be used to build GCC already default to an acceptable
version which was >= the version we forced via flags until now.
Bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108634
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230201230009.2252783-1-sam@gentoo.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
scripts/gcc-plugins/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/gcc-plugins/Makefile b/scripts/gcc-plugins/Makefile
index b34d11e226366..320afd3cf8e82 100644
--- a/scripts/gcc-plugins/Makefile
+++ b/scripts/gcc-plugins/Makefile
@@ -29,7 +29,7 @@ GCC_PLUGINS_DIR = $(shell $(CC) -print-file-name=plugin)
plugin_cxxflags = -Wp,-MMD,$(depfile) $(KBUILD_HOSTCXXFLAGS) -fPIC \
-include $(srctree)/include/linux/compiler-version.h \
-DPLUGIN_VERSION=$(call stringify,$(KERNELVERSION)) \
- -I $(GCC_PLUGINS_DIR)/include -I $(obj) -std=gnu++11 \
+ -I $(GCC_PLUGINS_DIR)/include -I $(obj) \
-fno-rtti -fno-exceptions -fasynchronous-unwind-tables \
-ggdb -Wno-narrowing -Wno-unused-variable \
-Wno-format-diag
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 574/885] tools/power/x86/intel-speed-select: Add Emerald Rapid quirk
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (572 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 573/885] gcc-plugins: drop -std=gnu++11 to fix GCC 13 build Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 575/885] wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup Greg Kroah-Hartman
` (313 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Rui, Srinivas Pandruvada,
Hans de Goede, Sasha Levin
From: Zhang Rui <rui.zhang@intel.com>
[ Upstream commit 61f9fdcdcd01f9a996b6db4e7092fcdfe8414ad5 ]
Need memory frequency quirk as Sapphire Rapids in Emerald Rapids.
So add Emerald Rapids CPU model check in is_spr_platform().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: Subject, changelog and code edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/power/x86/intel-speed-select/isst-config.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/power/x86/intel-speed-select/isst-config.c b/tools/power/x86/intel-speed-select/isst-config.c
index a160bad291eb7..be3668d37d654 100644
--- a/tools/power/x86/intel-speed-select/isst-config.c
+++ b/tools/power/x86/intel-speed-select/isst-config.c
@@ -110,7 +110,7 @@ int is_skx_based_platform(void)
int is_spr_platform(void)
{
- if (cpu_model == 0x8F)
+ if (cpu_model == 0x8F || cpu_model == 0xCF)
return 1;
return 0;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 575/885] wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (573 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 574/885] tools/power/x86/intel-speed-select: Add Emerald Rapid quirk Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 576/885] ACPI: video: Fix Lenovo Ideapad Z570 DMI match Greg Kroah-Hartman
` (312 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lorenzo Bianconi, Felix Fietkau,
Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 1b88b47e898edef0e56e3a2f4e49f052a136153d ]
Free rx_head skb in mt76_dma_rx_cleanup routine in order to avoid
possible memory leak at module unload.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/dma.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
index 7378c4d1e1567..478bffb7418d9 100644
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -573,6 +573,7 @@ mt76_dma_rx_cleanup(struct mt76_dev *dev, struct mt76_queue *q)
return;
spin_lock_bh(&q->lock);
+
do {
buf = mt76_dma_dequeue(dev, q, true, NULL, NULL, &more);
if (!buf)
@@ -580,6 +581,12 @@ mt76_dma_rx_cleanup(struct mt76_dev *dev, struct mt76_queue *q)
skb_free_frag(buf);
} while (1);
+
+ if (q->rx_head) {
+ dev_kfree_skb(q->rx_head);
+ q->rx_head = NULL;
+ }
+
spin_unlock_bh(&q->lock);
if (!q->rx_page.va)
@@ -605,12 +612,6 @@ mt76_dma_rx_reset(struct mt76_dev *dev, enum mt76_rxq_id qid)
mt76_dma_rx_cleanup(dev, q);
mt76_dma_sync_idx(dev, q);
mt76_dma_rx_fill(dev, q);
-
- if (!q->rx_head)
- return;
-
- dev_kfree_skb(q->rx_head);
- q->rx_head = NULL;
}
static void
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 576/885] ACPI: video: Fix Lenovo Ideapad Z570 DMI match
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (574 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 575/885] wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 577/885] net/mlx5: fw_tracer: Fix debug print Greg Kroah-Hartman
` (311 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hans de Goede, Rafael J. Wysocki,
Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit 2d11eae42d52a131f06061015e49dc0f085c5bfc ]
Multiple Ideapad Z570 variants need acpi_backlight=native to force native
use on these pre Windows 8 machines since acpi_video backlight control
does not work here.
The original DMI quirk matches on a product_name of "102434U" but other
variants may have different product_name-s such as e.g. "1024D9U".
Move to checking product_version instead as is more or less standard for
Lenovo DMI quirks for similar reasons.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/video_detect.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index b48f85c3791e9..7f0ed845cd6ad 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -432,7 +432,7 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
/* Lenovo Ideapad Z570 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_NAME, "102434U"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Ideapad Z570"),
},
},
{
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 577/885] net/mlx5: fw_tracer: Fix debug print
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (575 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 576/885] ACPI: video: Fix Lenovo Ideapad Z570 DMI match Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 578/885] coda: Avoid partial allocation of sig_inputArgs Greg Kroah-Hartman
` (310 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shay Drory, Moshe Shemesh,
Saeed Mahameed, Sasha Levin
From: Shay Drory <shayd@nvidia.com>
[ Upstream commit 988c2352273997a242f15c4fc3711773515006a2 ]
The debug message specify tdsn, but takes as an argument the
tmsn. The correct argument is tmsn, hence, fix the print.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
index 5b05b884b5fb3..d7b2ee5de1158 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
@@ -603,7 +603,7 @@ static int mlx5_tracer_handle_string_trace(struct mlx5_fw_tracer *tracer,
} else {
cur_string = mlx5_tracer_message_get(tracer, tracer_event);
if (!cur_string) {
- pr_debug("%s Got string event for unknown string tdsm: %d\n",
+ pr_debug("%s Got string event for unknown string tmsn: %d\n",
__func__, tracer_event->string_event.tmsn);
return -1;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 578/885] coda: Avoid partial allocation of sig_inputArgs
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (576 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 577/885] net/mlx5: fw_tracer: Fix debug print Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 579/885] uaccess: Add minimum bounds check on kernel buffer size Greg Kroah-Hartman
` (309 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jan Harkes, coda, codalist,
Kees Cook, Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit 48df133578c70185a95a49390d42df1996ddba2a ]
GCC does not like having a partially allocated object, since it cannot
reason about it for bounds checking when it is passed to other code.
Instead, fully allocate sig_inputArgs. (Alternatively, sig_inputArgs
should be defined as a struct coda_in_hdr, if it is actually not using
any other part of the union.) Seen under GCC 13:
../fs/coda/upcall.c: In function 'coda_upcall':
../fs/coda/upcall.c:801:22: warning: array subscript 'union inputArgs[0]' is partly outside array bounds of 'unsigned char[20]' [-Warray-bounds=]
801 | sig_inputArgs->ih.opcode = CODA_SIGNAL;
| ^~
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: coda@cs.cmu.edu
Cc: codalist@coda.cs.cmu.edu
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230127223921.never.882-kees@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/coda/upcall.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/coda/upcall.c b/fs/coda/upcall.c
index 59f6cfd06f96a..cd6a3721f6f69 100644
--- a/fs/coda/upcall.c
+++ b/fs/coda/upcall.c
@@ -791,7 +791,7 @@ static int coda_upcall(struct venus_comm *vcp,
sig_req = kmalloc(sizeof(struct upc_req), GFP_KERNEL);
if (!sig_req) goto exit;
- sig_inputArgs = kvzalloc(sizeof(struct coda_in_hdr), GFP_KERNEL);
+ sig_inputArgs = kvzalloc(sizeof(*sig_inputArgs), GFP_KERNEL);
if (!sig_inputArgs) {
kfree(sig_req);
goto exit;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 579/885] uaccess: Add minimum bounds check on kernel buffer size
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (577 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 578/885] coda: Avoid partial allocation of sig_inputArgs Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 580/885] s390/idle: mark arch_cpu_idle() noinstr Greg Kroah-Hartman
` (308 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christian Brauner, Rasmus Villemoes,
Arnd Bergmann, Dinh Nguyen, Catalin Marinas, Andrew Morton,
Geert Uytterhoeven, Alexander Potapenko, Aleksa Sarai, Kees Cook,
Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit 04ffde1319a715bd0550ded3580d4ea3bc003776 ]
While there is logic about the difference between ksize and usize,
copy_struct_from_user() didn't check the size of the destination buffer
(when it was known) against ksize. Add this check so there is an upper
bounds check on the possible memset() call, otherwise lower bounds
checks made by callers will trigger bounds warnings under -Warray-bounds.
Seen under GCC 13:
In function 'copy_struct_from_user',
inlined from 'iommufd_fops_ioctl' at
../drivers/iommu/iommufd/main.c:333:8:
../include/linux/fortify-string.h:59:33: warning: '__builtin_memset' offset [57, 4294967294] is out of the bounds [0, 56] of object 'buf' with type 'union ucmd_buffer' [-Warray-bounds=]
59 | #define __underlying_memset __builtin_memset
| ^
../include/linux/fortify-string.h:453:9: note: in expansion of macro '__underlying_memset'
453 | __underlying_memset(p, c, __fortify_size); \
| ^~~~~~~~~~~~~~~~~~~
../include/linux/fortify-string.h:461:25: note: in expansion of macro '__fortify_memset_chk'
461 | #define memset(p, c, s) __fortify_memset_chk(p, c, s, \
| ^~~~~~~~~~~~~~~~~~~~
../include/linux/uaccess.h:334:17: note: in expansion of macro 'memset'
334 | memset(dst + size, 0, rest);
| ^~~~~~
../drivers/iommu/iommufd/main.c: In function 'iommufd_fops_ioctl':
../drivers/iommu/iommufd/main.c:311:27: note: 'buf' declared here
311 | union ucmd_buffer buf;
| ^~~
Cc: Christian Brauner <brauner@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alexander Potapenko <glider@google.com>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20230203193523.never.667-kees@kernel.org/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/uaccess.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
index afb18f198843b..ab9728138ad67 100644
--- a/include/linux/uaccess.h
+++ b/include/linux/uaccess.h
@@ -329,6 +329,10 @@ copy_struct_from_user(void *dst, size_t ksize, const void __user *src,
size_t size = min(ksize, usize);
size_t rest = max(ksize, usize) - size;
+ /* Double check if ksize is larger than a known object size. */
+ if (WARN_ON_ONCE(ksize > __builtin_object_size(dst, 1)))
+ return -E2BIG;
+
/* Deal with trailing bytes. */
if (usize < ksize) {
memset(dst + size, 0, rest);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 580/885] s390/idle: mark arch_cpu_idle() noinstr
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (578 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 579/885] uaccess: Add minimum bounds check on kernel buffer size Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 581/885] time/debug: Fix memory leak with using debugfs_lookup() Greg Kroah-Hartman
` (307 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sven Schnelle, Heiko Carstens, Sasha Levin
From: Heiko Carstens <hca@linux.ibm.com>
[ Upstream commit a9cbc1b471d291c865907542394f1c483b93a811 ]
linux-next commit ("cpuidle: tracing: Warn about !rcu_is_watching()")
adds a new warning which hits on s390's arch_cpu_idle() function:
RCU not on for: arch_cpu_idle+0x0/0x28
WARNING: CPU: 2 PID: 0 at include/linux/trace_recursion.h:162 arch_ftrace_ops_list_func+0x24c/0x258
Modules linked in:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.2.0-rc6-next-20230202 #4
Hardware name: IBM 8561 T01 703 (z/VM 7.3.0)
Krnl PSW : 0404d00180000000 00000000002b55c0 (arch_ftrace_ops_list_func+0x250/0x258)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: c0000000ffffbfff 0000000080000002 0000000000000026 0000000000000000
0000037ffffe3a28 0000037ffffe3a20 0000000000000000 0000000000000000
0000000000000000 0000000000f4acf6 00000000001044f0 0000037ffffe3cb0
0000000000000000 0000000000000000 00000000002b55bc 0000037ffffe3bb8
Krnl Code: 00000000002b55b0: c02000840051 larl %r2,0000000001335652
00000000002b55b6: c0e5fff512d1 brasl %r14,0000000000157b58
#00000000002b55bc: af000000 mc 0,0
>00000000002b55c0: a7f4ffe7 brc 15,00000000002b558e
00000000002b55c4: 0707 bcr 0,%r7
00000000002b55c6: 0707 bcr 0,%r7
00000000002b55c8: eb6ff0480024 stmg %r6,%r15,72(%r15)
00000000002b55ce: b90400ef lgr %r14,%r15
Call Trace:
[<00000000002b55c0>] arch_ftrace_ops_list_func+0x250/0x258
([<00000000002b55bc>] arch_ftrace_ops_list_func+0x24c/0x258)
[<0000000000f5f0fc>] ftrace_common+0x1c/0x20
[<00000000001044f6>] arch_cpu_idle+0x6/0x28
[<0000000000f4acf6>] default_idle_call+0x76/0x128
[<00000000001cc374>] do_idle+0xf4/0x1b0
[<00000000001cc6ce>] cpu_startup_entry+0x36/0x40
[<0000000000119d00>] smp_start_secondary+0x140/0x150
[<0000000000f5d2ae>] restart_int_handler+0x6e/0x90
Mark arch_cpu_idle() noinstr like all other architectures with
CONFIG_ARCH_WANTS_NO_INSTR (should) have it to fix this.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/kernel/idle.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/kernel/idle.c b/arch/s390/kernel/idle.c
index 4bf1ee293f2b3..a0da049e73609 100644
--- a/arch/s390/kernel/idle.c
+++ b/arch/s390/kernel/idle.c
@@ -44,7 +44,7 @@ void account_idle_time_irq(void)
S390_lowcore.last_update_timer = idle->timer_idle_exit;
}
-void arch_cpu_idle(void)
+void noinstr arch_cpu_idle(void)
{
struct s390_idle_data *idle = this_cpu_ptr(&s390_idle);
unsigned long idle_time;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 581/885] time/debug: Fix memory leak with using debugfs_lookup()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (579 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 580/885] s390/idle: mark arch_cpu_idle() noinstr Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 582/885] PM: domains: fix " Greg Kroah-Hartman
` (306 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Thomas Gleixner, Sasha Levin
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5b268d8abaec6cbd4bd70d062e769098d96670aa ]
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230202151214.2306822-1-gregkh@linuxfoundation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/time/test_udelay.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/time/test_udelay.c b/kernel/time/test_udelay.c
index 13b11eb62685e..20d5df631570e 100644
--- a/kernel/time/test_udelay.c
+++ b/kernel/time/test_udelay.c
@@ -149,7 +149,7 @@ module_init(udelay_test_init);
static void __exit udelay_test_exit(void)
{
mutex_lock(&udelay_test_lock);
- debugfs_remove(debugfs_lookup(DEBUGFS_FILENAME, NULL));
+ debugfs_lookup_and_remove(DEBUGFS_FILENAME, NULL);
mutex_unlock(&udelay_test_lock);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 582/885] PM: domains: fix memory leak with using debugfs_lookup()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (580 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 581/885] time/debug: Fix memory leak with using debugfs_lookup() Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 583/885] PM: EM: " Greg Kroah-Hartman
` (305 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ulf Hansson, Rafael J. Wysocki, Sasha Levin
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0b6200e1e9f53dabdc30d0f6c51af9a5f664d32b ]
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/power/domain.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 6471b559230e9..b411201f75bfb 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -220,13 +220,10 @@ static void genpd_debug_add(struct generic_pm_domain *genpd);
static void genpd_debug_remove(struct generic_pm_domain *genpd)
{
- struct dentry *d;
-
if (!genpd_debugfs_dir)
return;
- d = debugfs_lookup(genpd->name, genpd_debugfs_dir);
- debugfs_remove(d);
+ debugfs_lookup_and_remove(genpd->name, genpd_debugfs_dir);
}
static void genpd_update_accounting(struct generic_pm_domain *genpd)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 583/885] PM: EM: fix memory leak with using debugfs_lookup()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (581 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 582/885] PM: domains: fix " Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 584/885] Bluetooth: Fix issue with Actions Semi ATS2851 based devices Greg Kroah-Hartman
` (304 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Rafael J. Wysocki, Sasha Levin
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a0e8c13ccd6a9a636d27353da62c2410c4eca337 ]
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/power/energy_model.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/kernel/power/energy_model.c b/kernel/power/energy_model.c
index f82111837b8d1..7b44f5b89fa15 100644
--- a/kernel/power/energy_model.c
+++ b/kernel/power/energy_model.c
@@ -87,10 +87,7 @@ static void em_debug_create_pd(struct device *dev)
static void em_debug_remove_pd(struct device *dev)
{
- struct dentry *debug_dir;
-
- debug_dir = debugfs_lookup(dev_name(dev), rootdir);
- debugfs_remove_recursive(debug_dir);
+ debugfs_lookup_and_remove(dev_name(dev), rootdir);
}
static int __init em_debug_init(void)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 584/885] Bluetooth: Fix issue with Actions Semi ATS2851 based devices
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (582 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 583/885] PM: EM: " Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 585/885] Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921 Greg Kroah-Hartman
` (303 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marcel Holtmann,
Luiz Augusto von Dentz, Sasha Levin
From: Marcel Holtmann <marcel@holtmann.org>
[ Upstream commit 5d44f76fab0839799b19cbc88d13575da968dc08 ]
Their devices claim to support the erroneous data reporting, but don't
actually support the required commands. So blacklist them and add a
quirk.
< HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0
> HCI Event: Command Status (0x0f) plen 4
Read Default Erroneous Data Reporting (0x03|0x005a) ncmd 1
Status: Unknown HCI Command (0x01)
T: Bus=02 Lev=02 Prnt=08 Port=02 Cnt=01 Dev#= 10 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=10d7 ProdID=b012 Rev=88.91
S: Manufacturer=Actions
S: Product=general adapter
S: SerialNumber=ACTIONS1234
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=01(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=01(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=01(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=01(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=01(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=01(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btusb.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 93e9ae928e4e8..4394a0e40c733 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -63,6 +63,7 @@ static struct usb_driver btusb_driver;
#define BTUSB_INTEL_BROKEN_SHUTDOWN_LED BIT(24)
#define BTUSB_INTEL_BROKEN_INITIAL_NCMD BIT(25)
#define BTUSB_INTEL_NO_WBS_SUPPORT BIT(26)
+#define BTUSB_ACTIONS_SEMI BIT(27)
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
@@ -663,6 +664,9 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cb5, 0xc547), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ /* Actions Semiconductor ATS2851 based devices */
+ { USB_DEVICE(0x10d7, 0xb012), .driver_info = BTUSB_ACTIONS_SEMI },
+
/* Silicon Wave based devices */
{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
@@ -4012,6 +4016,11 @@ static int btusb_probe(struct usb_interface *intf,
set_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags);
}
+ if (id->driver_info & BTUSB_ACTIONS_SEMI) {
+ /* Support is advertised, but not implemented */
+ set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
+ }
+
if (!reset)
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 585/885] Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (583 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 584/885] Bluetooth: Fix issue with Actions Semi ATS2851 based devices Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 586/885] Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE Greg Kroah-Hartman
` (302 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sean Wang, Anson Tsao,
Mario Limonciello, Luiz Augusto von Dentz, Sasha Levin
From: Mario Limonciello <mario.limonciello@amd.com>
[ Upstream commit 83458a5f272b303479e7d2f451600817a7350b6b ]
This bluetooth device is found in a combo WLAN/BT card
for a MediaTek 7921e.
The device information:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e0f2 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btusb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 4394a0e40c733..b8cd42d81d5ca 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -558,6 +558,9 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0489, 0xe0e0), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH |
BTUSB_VALID_LE_STATES },
+ { USB_DEVICE(0x0489, 0xe0f2), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH |
+ BTUSB_VALID_LE_STATES },
{ USB_DEVICE(0x04ca, 0x3802), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH |
BTUSB_VALID_LE_STATES },
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 586/885] Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (584 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 585/885] Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921 Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 587/885] wifi: rtw89: debug: avoid invalid access on RTW89_DBG_SEL_MAC_30 Greg Kroah-Hartman
` (301 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Moises Cardona,
Luiz Augusto von Dentz, Sasha Levin
From: Moises Cardona <moisesmcardona@gmail.com>
[ Upstream commit 1eec3b95b5ce7fb2cdd273ac4f8b24b1ed6776a1 ]
This patch adds VID:PID 13d3:3529 to the btusb.c file.
This VID:PID is found in the Realtek RTL8821CE module
(M.2 module AW-CB304NF on an ASUS E210MA laptop)
Output of /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3529 Rev= 1.10
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Moises Cardona <moisesmcardona@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index b8cd42d81d5ca..952dc9d2404ed 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -492,6 +492,10 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
.driver_info = BTUSB_IGNORE },
+ /* Realtek 8821CE Bluetooth devices */
+ { USB_DEVICE(0x13d3, 0x3529), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+
/* Realtek 8822CE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 587/885] wifi: rtw89: debug: avoid invalid access on RTW89_DBG_SEL_MAC_30
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (585 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 586/885] Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 588/885] hv_netvsc: Check status in SEND_RNDIS_PKT completion message Greg Kroah-Hartman
` (300 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zong-Zhe Yang, Ping-Ke Shih,
Kalle Valo, Sasha Levin
From: Zong-Zhe Yang <kevin_yang@realtek.com>
[ Upstream commit c074da21dd346e0cfef5d08b0715078d7aea7f8d ]
Only 8852C chip has valid pages on RTW89_DBG_SEL_MAC_30. To other chips,
this section is an address hole. It will lead to crash if trying to access
this section on chips except for 8852C. So, we avoid that.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230119063529.61563-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtw89/debug.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/debug.c b/drivers/net/wireless/realtek/rtw89/debug.c
index 730e83d54257f..50701c55ed602 100644
--- a/drivers/net/wireless/realtek/rtw89/debug.c
+++ b/drivers/net/wireless/realtek/rtw89/debug.c
@@ -594,6 +594,7 @@ rtw89_debug_priv_mac_reg_dump_select(struct file *filp,
struct seq_file *m = (struct seq_file *)filp->private_data;
struct rtw89_debugfs_priv *debugfs_priv = m->private;
struct rtw89_dev *rtwdev = debugfs_priv->rtwdev;
+ const struct rtw89_chip_info *chip = rtwdev->chip;
char buf[32];
size_t buf_size;
int sel;
@@ -613,6 +614,12 @@ rtw89_debug_priv_mac_reg_dump_select(struct file *filp,
return -EINVAL;
}
+ if (sel == RTW89_DBG_SEL_MAC_30 && chip->chip_id != RTL8852C) {
+ rtw89_info(rtwdev, "sel %d is address hole on chip %d\n", sel,
+ chip->chip_id);
+ return -EINVAL;
+ }
+
debugfs_priv->cb_data = sel;
rtw89_info(rtwdev, "select mac page dump %d\n", debugfs_priv->cb_data);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 588/885] hv_netvsc: Check status in SEND_RNDIS_PKT completion message
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (586 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 587/885] wifi: rtw89: debug: avoid invalid access on RTW89_DBG_SEL_MAC_30 Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 589/885] s390/kfence: fix page fault reporting Greg Kroah-Hartman
` (299 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michael Kelley, Haiyang Zhang,
Paolo Abeni, Sasha Levin
From: Michael Kelley <mikelley@microsoft.com>
[ Upstream commit dca5161f9bd052e9e73be90716ffd57e8762c697 ]
Completion responses to SEND_RNDIS_PKT messages are currently processed
regardless of the status in the response, so that resources associated
with the request are freed. While this is appropriate, code bugs that
cause sending a malformed message, or errors on the Hyper-V host, go
undetected. Fix this by checking the status and outputting a rate-limited
message if there is an error.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1676264881-48928-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/hyperv/netvsc.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 79f4e13620a46..da737d959e81c 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -851,6 +851,7 @@ static void netvsc_send_completion(struct net_device *ndev,
u32 msglen = hv_pkt_datalen(desc);
struct nvsp_message *pkt_rqst;
u64 cmd_rqst;
+ u32 status;
/* First check if this is a VMBUS completion without data payload */
if (!msglen) {
@@ -922,6 +923,23 @@ static void netvsc_send_completion(struct net_device *ndev,
break;
case NVSP_MSG1_TYPE_SEND_RNDIS_PKT_COMPLETE:
+ if (msglen < sizeof(struct nvsp_message_header) +
+ sizeof(struct nvsp_1_message_send_rndis_packet_complete)) {
+ if (net_ratelimit())
+ netdev_err(ndev, "nvsp_rndis_pkt_complete length too small: %u\n",
+ msglen);
+ return;
+ }
+
+ /* If status indicates an error, output a message so we know
+ * there's a problem. But process the completion anyway so the
+ * resources are released.
+ */
+ status = nvsp_packet->msg.v1_msg.send_rndis_pkt_complete.status;
+ if (status != NVSP_STAT_SUCCESS && net_ratelimit())
+ netdev_err(ndev, "nvsp_rndis_pkt_complete error status: %x\n",
+ status);
+
netvsc_send_tx_complete(ndev, net_device, incoming_channel,
desc, budget);
break;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 589/885] s390/kfence: fix page fault reporting
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (587 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 588/885] hv_netvsc: Check status in SEND_RNDIS_PKT completion message Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 590/885] devlink: Fix TP_STRUCT_entry in trace of devlink health report Greg Kroah-Hartman
` (298 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Baoquan He, Alexander Potapenko,
Heiko Carstens, Sasha Levin
From: Heiko Carstens <hca@linux.ibm.com>
[ Upstream commit d9c2cf67b9cfd643ba85d51bc865a89a92e4f979 ]
Baoquan He reported lots of KFENCE reports when /proc/kcore is read,
e.g. with crash or even simpler with dd:
BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x5e/0x120
Invalid read at 0x00000000f4f5149f:
copy_from_kernel_nofault+0x5e/0x120
read_kcore+0x6b2/0x870
proc_reg_read+0x9a/0xf0
vfs_read+0x94/0x270
ksys_read+0x70/0x100
__do_syscall+0x1d0/0x200
system_call+0x82/0xb0
The reason for this is that read_kcore() simply reads memory that might
have been unmapped by KFENCE with copy_from_kernel_nofault(). Any fault due
to pages being unmapped by KFENCE would be handled gracefully by the fault
handler (exception table fixup).
However the s390 fault handler first reports the fault, and only afterwards
would perform the exception table fixup. Most architectures have this in
reversed order, which also avoids the false positive KFENCE reports when an
unmapped page is accessed.
Therefore change the s390 fault handler so it handles exception table
fixups before KFENCE page faults are reported.
Reported-by: Baoquan He <bhe@redhat.com>
Tested-by: Baoquan He <bhe@redhat.com>
Acked-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20230213183858.1473681-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/mm/fault.c | 49 +++++++++++++++++++++++++++++++-------------
1 file changed, 35 insertions(+), 14 deletions(-)
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 9649d9382e0ae..8e84ed2bb944e 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -96,6 +96,20 @@ static enum fault_type get_fault_type(struct pt_regs *regs)
return KERNEL_FAULT;
}
+static unsigned long get_fault_address(struct pt_regs *regs)
+{
+ unsigned long trans_exc_code = regs->int_parm_long;
+
+ return trans_exc_code & __FAIL_ADDR_MASK;
+}
+
+static bool fault_is_write(struct pt_regs *regs)
+{
+ unsigned long trans_exc_code = regs->int_parm_long;
+
+ return (trans_exc_code & store_indication) == 0x400;
+}
+
static int bad_address(void *p)
{
unsigned long dummy;
@@ -228,15 +242,26 @@ static noinline void do_sigsegv(struct pt_regs *regs, int si_code)
(void __user *)(regs->int_parm_long & __FAIL_ADDR_MASK));
}
-static noinline void do_no_context(struct pt_regs *regs)
+static noinline void do_no_context(struct pt_regs *regs, vm_fault_t fault)
{
+ enum fault_type fault_type;
+ unsigned long address;
+ bool is_write;
+
if (fixup_exception(regs))
return;
+ fault_type = get_fault_type(regs);
+ if ((fault_type == KERNEL_FAULT) && (fault == VM_FAULT_BADCONTEXT)) {
+ address = get_fault_address(regs);
+ is_write = fault_is_write(regs);
+ if (kfence_handle_page_fault(address, is_write, regs))
+ return;
+ }
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
- if (get_fault_type(regs) == KERNEL_FAULT)
+ if (fault_type == KERNEL_FAULT)
printk(KERN_ALERT "Unable to handle kernel pointer dereference"
" in virtual kernel address space\n");
else
@@ -255,7 +280,7 @@ static noinline void do_low_address(struct pt_regs *regs)
die (regs, "Low-address protection");
}
- do_no_context(regs);
+ do_no_context(regs, VM_FAULT_BADACCESS);
}
static noinline void do_sigbus(struct pt_regs *regs)
@@ -286,28 +311,28 @@ static noinline void do_fault_error(struct pt_regs *regs, vm_fault_t fault)
fallthrough;
case VM_FAULT_BADCONTEXT:
case VM_FAULT_PFAULT:
- do_no_context(regs);
+ do_no_context(regs, fault);
break;
case VM_FAULT_SIGNAL:
if (!user_mode(regs))
- do_no_context(regs);
+ do_no_context(regs, fault);
break;
default: /* fault & VM_FAULT_ERROR */
if (fault & VM_FAULT_OOM) {
if (!user_mode(regs))
- do_no_context(regs);
+ do_no_context(regs, fault);
else
pagefault_out_of_memory();
} else if (fault & VM_FAULT_SIGSEGV) {
/* Kernel mode? Handle exceptions or die */
if (!user_mode(regs))
- do_no_context(regs);
+ do_no_context(regs, fault);
else
do_sigsegv(regs, SEGV_MAPERR);
} else if (fault & VM_FAULT_SIGBUS) {
/* Kernel mode? Handle exceptions or die */
if (!user_mode(regs))
- do_no_context(regs);
+ do_no_context(regs, fault);
else
do_sigbus(regs);
} else
@@ -334,7 +359,6 @@ static inline vm_fault_t do_exception(struct pt_regs *regs, int access)
struct mm_struct *mm;
struct vm_area_struct *vma;
enum fault_type type;
- unsigned long trans_exc_code;
unsigned long address;
unsigned int flags;
vm_fault_t fault;
@@ -351,9 +375,8 @@ static inline vm_fault_t do_exception(struct pt_regs *regs, int access)
return 0;
mm = tsk->mm;
- trans_exc_code = regs->int_parm_long;
- address = trans_exc_code & __FAIL_ADDR_MASK;
- is_write = (trans_exc_code & store_indication) == 0x400;
+ address = get_fault_address(regs);
+ is_write = fault_is_write(regs);
/*
* Verify that the fault happened in user space, that
@@ -364,8 +387,6 @@ static inline vm_fault_t do_exception(struct pt_regs *regs, int access)
type = get_fault_type(regs);
switch (type) {
case KERNEL_FAULT:
- if (kfence_handle_page_fault(address, is_write, regs))
- return 0;
goto out;
case USER_FAULT:
case GMAP_FAULT:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 590/885] devlink: Fix TP_STRUCT_entry in trace of devlink health report
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (588 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 589/885] s390/kfence: fix page fault reporting Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 591/885] scm: add user copy checks to put_cmsg() Greg Kroah-Hartman
` (297 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Moshe Shemesh, Jiri Pirko,
Jakub Kicinski, Sasha Levin
From: Moshe Shemesh <moshe@nvidia.com>
[ Upstream commit d0ab772c1f1558af84f3293a52e9e886e08e0754 ]
Fix a bug in trace point definition for devlink health report, as
TP_STRUCT_entry of reporter_name should get reporter_name and not msg.
Note no fixes tag as this is a harmless bug as both reporter_name and
msg are strings and TP_fast_assign for this entry is correct.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/trace/events/devlink.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/trace/events/devlink.h b/include/trace/events/devlink.h
index 24969184c5348..77ff7cfc6049a 100644
--- a/include/trace/events/devlink.h
+++ b/include/trace/events/devlink.h
@@ -88,7 +88,7 @@ TRACE_EVENT(devlink_health_report,
__string(bus_name, devlink_to_dev(devlink)->bus->name)
__string(dev_name, dev_name(devlink_to_dev(devlink)))
__string(driver_name, devlink_to_dev(devlink)->driver->name)
- __string(reporter_name, msg)
+ __string(reporter_name, reporter_name)
__string(msg, msg)
),
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 591/885] scm: add user copy checks to put_cmsg()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (589 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 590/885] devlink: Fix TP_STRUCT_entry in trace of devlink health report Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 592/885] drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Tab 3 X90F Greg Kroah-Hartman
` (296 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eric Dumazet, Kees Cook,
David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 5f1eb1ff58ea122e24adf0bc940f268ed2227462 ]
This is a followup of commit 2558b8039d05 ("net: use a bounce
buffer for copying skb->mark")
x86 and powerpc define user_access_begin, meaning
that they are not able to perform user copy checks
when using user_write_access_begin() / unsafe_copy_to_user()
and friends [1]
Instead of waiting bugs to trigger on other arches,
add a check_object_size() in put_cmsg() to make sure
that new code tested on x86 with CONFIG_HARDENED_USERCOPY=y
will perform more security checks.
[1] We can not generically call check_object_size() from
unsafe_copy_to_user() because UACCESS is enabled at this point.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/scm.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/core/scm.c b/net/core/scm.c
index 5c356f0dee30c..acb7d776fa6ec 100644
--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -229,6 +229,8 @@ int put_cmsg(struct msghdr * msg, int level, int type, int len, void *data)
if (msg->msg_control_is_user) {
struct cmsghdr __user *cm = msg->msg_control_user;
+ check_object_size(data, cmlen - sizeof(*cm), true);
+
if (!user_write_access_begin(cm, cmlen))
goto efault;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 592/885] drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Tab 3 X90F
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (590 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 591/885] scm: add user copy checks to put_cmsg() Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 593/885] drm: panel-orientation-quirks: Add quirk for DynaBook K50 Greg Kroah-Hartman
` (295 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hans de Goede,
Javier Martinez Canillas, Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit 8a238d7f7eea7592e0764bc3b9e79e7c6354b04c ]
The Lenovo Yoga Tab 3 X90F has a portrait 1600x2560 LCD used in
landscape mode, add a quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221127181539.104223-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index 3659f0465a724..23d63a4d42d9c 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -127,6 +127,12 @@ static const struct drm_dmi_panel_orientation_data lcd1600x2560_leftside_up = {
.orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
};
+static const struct drm_dmi_panel_orientation_data lcd1600x2560_rightside_up = {
+ .width = 1600,
+ .height = 2560,
+ .orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
static const struct dmi_system_id orientation_data[] = {
{ /* Acer One 10 (S1003) */
.matches = {
@@ -331,6 +337,13 @@ static const struct dmi_system_id orientation_data[] = {
DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21"),
},
.driver_data = (void *)&lcd1200x1920_rightside_up,
+ }, { /* Lenovo Yoga Tab 3 X90F */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Blade3-10A-001"),
+ },
+ .driver_data = (void *)&lcd1600x2560_rightside_up,
}, { /* Nanote UMPC-01 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "RWC CO.,LTD"),
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 593/885] drm: panel-orientation-quirks: Add quirk for DynaBook K50
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (591 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 592/885] drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Tab 3 X90F Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 594/885] drm/amd/display: Reduce expected sdp bandwidth for dcn321 Greg Kroah-Hartman
` (294 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Allen Ballway, Hans de Goede, Sasha Levin
From: Allen Ballway <ballway@chromium.org>
[ Upstream commit a3caf7ea0c3d5872ed0f2c51f5476aee0c47a73a ]
Like the ASUS T100HAN for which there is already a quirk,
the DynaBook K50 has a 800x1280 portrait screen mounted
in the tablet part of a landscape oriented 2-in-1.
Update the quirk to be more generic and apply to this device.
Signed-off-by: Allen Ballway <ballway@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221130170811.1.Iee9a494547541dade9eeee9521cc8b811e76a8a0@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../gpu/drm/drm_panel_orientation_quirks.c | 20 ++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index 23d63a4d42d9c..b409fe256fd0a 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -30,12 +30,6 @@ struct drm_dmi_panel_orientation_data {
int orientation;
};
-static const struct drm_dmi_panel_orientation_data asus_t100ha = {
- .width = 800,
- .height = 1280,
- .orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
-};
-
static const struct drm_dmi_panel_orientation_data gpd_micropc = {
.width = 720,
.height = 1280,
@@ -97,6 +91,12 @@ static const struct drm_dmi_panel_orientation_data lcd720x1280_rightside_up = {
.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
};
+static const struct drm_dmi_panel_orientation_data lcd800x1280_leftside_up = {
+ .width = 800,
+ .height = 1280,
+ .orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
+};
+
static const struct drm_dmi_panel_orientation_data lcd800x1280_rightside_up = {
.width = 800,
.height = 1280,
@@ -157,7 +157,7 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
},
- .driver_data = (void *)&asus_t100ha,
+ .driver_data = (void *)&lcd800x1280_leftside_up,
}, { /* Asus T101HA */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
@@ -202,6 +202,12 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Hi10 pro tablet"),
},
.driver_data = (void *)&lcd1200x1920_rightside_up,
+ }, { /* Dynabook K50 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dynabook Inc."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "dynabook K50/FR"),
+ },
+ .driver_data = (void *)&lcd800x1280_leftside_up,
}, { /* GPD MicroPC (generic strings, also match on bios date) */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Default string"),
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 594/885] drm/amd/display: Reduce expected sdp bandwidth for dcn321
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (592 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 593/885] drm: panel-orientation-quirks: Add quirk for DynaBook K50 Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 595/885] drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write Greg Kroah-Hartman
` (293 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jun Lei, Jasdeep Dhillon,
Dillon Varone, Alex Deucher, Sasha Levin
From: Dillon Varone <Dillon.Varone@amd.com>
[ Upstream commit 6b81090d6d4cc0fd818c9ec9dbb6906f921ad396 ]
[Description]
Modify soc BB to reduce expected sdp bandwidth and align with measurements to
fix underflow issues.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c
index f4b176599be7a..0ea406145c1d7 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c
@@ -136,7 +136,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_21_soc = {
.urgent_out_of_order_return_per_channel_pixel_only_bytes = 4096,
.urgent_out_of_order_return_per_channel_pixel_and_vm_bytes = 4096,
.urgent_out_of_order_return_per_channel_vm_only_bytes = 4096,
- .pct_ideal_sdp_bw_after_urgent = 100.0,
+ .pct_ideal_sdp_bw_after_urgent = 90.0,
.pct_ideal_fabric_bw_after_urgent = 67.0,
.pct_ideal_dram_sdp_bw_after_urgent_pixel_only = 20.0,
.pct_ideal_dram_sdp_bw_after_urgent_pixel_and_vm = 60.0, // N/A, for now keep as is until DML implemented
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 595/885] drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (593 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 594/885] drm/amd/display: Reduce expected sdp bandwidth for dcn321 Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 596/885] drm/amd/display: Fix potential null-deref in dm_resume Greg Kroah-Hartman
` (292 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wayne Lin, Jasdeep Dhillon,
Ian Chen, Alex Deucher, Sasha Levin
From: Ian Chen <ian.chen@amd.com>
[ Upstream commit 639f6ad6df7f47db48b59956b469a6917a136afb ]
[WHY]
It causes regression AMD source will not write DPCD 340.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 6 ------
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 14 +++-----------
drivers/gpu/drm/amd/display/dc/dc_dp_types.h | 1 -
3 files changed, 3 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 40b9d2ce08e66..328c5e33cc66b 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1916,12 +1916,6 @@ struct dc_link *link_create(const struct link_init_data *init_params)
if (false == dc_link_construct(link, init_params))
goto construct_fail;
- /*
- * Must use preferred_link_setting, not reported_link_cap or verified_link_cap,
- * since struct preferred_link_setting won't be reset after S3.
- */
- link->preferred_link_setting.dpcd_source_device_specific_field_support = true;
-
return link;
construct_fail:
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 1254d38f1778a..24f1aba4ae133 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -6591,18 +6591,10 @@ void dpcd_set_source_specific_data(struct dc_link *link)
uint8_t hblank_size = (uint8_t)link->dc->caps.min_horizontal_blanking_period;
- if (link->preferred_link_setting.dpcd_source_device_specific_field_support) {
- result_write_min_hblank = core_link_write_dpcd(link,
- DP_SOURCE_MINIMUM_HBLANK_SUPPORTED, (uint8_t *)(&hblank_size),
- sizeof(hblank_size));
-
- if (result_write_min_hblank == DC_ERROR_UNEXPECTED)
- link->preferred_link_setting.dpcd_source_device_specific_field_support = false;
- } else {
- DC_LOG_DC("Sink device does not support 00340h DPCD write. Skipping on purpose.\n");
- }
+ result_write_min_hblank = core_link_write_dpcd(link,
+ DP_SOURCE_MINIMUM_HBLANK_SUPPORTED, (uint8_t *)(&hblank_size),
+ sizeof(hblank_size));
}
-
DC_TRACE_LEVEL_MESSAGE(DAL_TRACE_LEVEL_INFORMATION,
WPP_BIT_FLAG_DC_DETECTION_DP_CAPS,
"result=%u link_index=%u enum dce_version=%d DPCD=0x%04X min_hblank=%u branch_dev_id=0x%x branch_dev_name='%c%c%c%c%c%c'",
diff --git a/drivers/gpu/drm/amd/display/dc/dc_dp_types.h b/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
index 2c54b6e0498bf..296793d8b2bf2 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
@@ -149,7 +149,6 @@ struct dc_link_settings {
enum dc_link_spread link_spread;
bool use_link_rate_set;
uint8_t link_rate_set;
- bool dpcd_source_device_specific_field_support;
};
union dc_dp_ffe_preset {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 596/885] drm/amd/display: Fix potential null-deref in dm_resume
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (594 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 595/885] drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 597/885] drm/omap: dsi: Fix excessive stack usage Greg Kroah-Hartman
` (291 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernel test robot, Dan Carpenter,
Wayne Lin, Jasdeep Dhillon, Roman Li, Alex Deucher, Sasha Levin
From: Roman Li <roman.li@amd.com>
[ Upstream commit 7a7175a2cd84b7874bebbf8e59f134557a34161b ]
[Why]
Fixing smatch error:
dm_resume() error: we previously assumed 'aconnector->dc_link' could be null
[How]
Check if dc_link null at the beginning of the loop,
so further checks can be dropped.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index a930b1873f2a4..25ffc51ae6fa7 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2744,12 +2744,14 @@ static int dm_resume(void *handle)
drm_for_each_connector_iter(connector, &iter) {
aconnector = to_amdgpu_dm_connector(connector);
+ if (!aconnector->dc_link)
+ continue;
+
/*
* this is the case when traversing through already created
* MST connectors, should be skipped
*/
- if (aconnector->dc_link &&
- aconnector->dc_link->type == dc_connection_mst_branch)
+ if (aconnector->dc_link->type == dc_connection_mst_branch)
continue;
mutex_lock(&aconnector->hpd_lock);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 597/885] drm/omap: dsi: Fix excessive stack usage
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (595 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 596/885] drm/amd/display: Fix potential null-deref in dm_resume Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 598/885] HID: Add Mapping for System Microphone Mute Greg Kroah-Hartman
` (290 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tomi Valkeinen, kernel test robot,
Arnd Bergmann, Sasha Levin
From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[ Upstream commit cfca78971b9233aef0891507a98fba62046d4542 ]
dsi_dump_dsi_irqs(), a function used for debugfs prints, has a large
struct in its frame, which can result in:
drivers/gpu/drm/omapdrm/dss/dsi.c:1126:1: warning: the frame size of 1060 bytes is larger than 1024 bytes [-Wframe-larger-than=]
As the performance of the function is of no concern, let's allocate the
struct with kmalloc instead.
Compile-tested only.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916082206.167427-1-tomi.valkeinen@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/omapdrm/dss/dsi.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index a6845856cbce4..4c1084eb01759 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -1039,22 +1039,26 @@ static int dsi_dump_dsi_irqs(struct seq_file *s, void *p)
{
struct dsi_data *dsi = s->private;
unsigned long flags;
- struct dsi_irq_stats stats;
+ struct dsi_irq_stats *stats;
+
+ stats = kmalloc(sizeof(*stats), GFP_KERNEL);
+ if (!stats)
+ return -ENOMEM;
spin_lock_irqsave(&dsi->irq_stats_lock, flags);
- stats = dsi->irq_stats;
+ *stats = dsi->irq_stats;
memset(&dsi->irq_stats, 0, sizeof(dsi->irq_stats));
dsi->irq_stats.last_reset = jiffies;
spin_unlock_irqrestore(&dsi->irq_stats_lock, flags);
seq_printf(s, "period %u ms\n",
- jiffies_to_msecs(jiffies - stats.last_reset));
+ jiffies_to_msecs(jiffies - stats->last_reset));
- seq_printf(s, "irqs %d\n", stats.irq_count);
+ seq_printf(s, "irqs %d\n", stats->irq_count);
#define PIS(x) \
- seq_printf(s, "%-20s %10d\n", #x, stats.dsi_irqs[ffs(DSI_IRQ_##x)-1]);
+ seq_printf(s, "%-20s %10d\n", #x, stats->dsi_irqs[ffs(DSI_IRQ_##x)-1]);
seq_printf(s, "-- DSI%d interrupts --\n", dsi->module_id + 1);
PIS(VC0);
@@ -1078,10 +1082,10 @@ static int dsi_dump_dsi_irqs(struct seq_file *s, void *p)
#define PIS(x) \
seq_printf(s, "%-20s %10d %10d %10d %10d\n", #x, \
- stats.vc_irqs[0][ffs(DSI_VC_IRQ_##x)-1], \
- stats.vc_irqs[1][ffs(DSI_VC_IRQ_##x)-1], \
- stats.vc_irqs[2][ffs(DSI_VC_IRQ_##x)-1], \
- stats.vc_irqs[3][ffs(DSI_VC_IRQ_##x)-1]);
+ stats->vc_irqs[0][ffs(DSI_VC_IRQ_##x)-1], \
+ stats->vc_irqs[1][ffs(DSI_VC_IRQ_##x)-1], \
+ stats->vc_irqs[2][ffs(DSI_VC_IRQ_##x)-1], \
+ stats->vc_irqs[3][ffs(DSI_VC_IRQ_##x)-1]);
seq_printf(s, "-- VC interrupts --\n");
PIS(CS);
@@ -1097,7 +1101,7 @@ static int dsi_dump_dsi_irqs(struct seq_file *s, void *p)
#define PIS(x) \
seq_printf(s, "%-20s %10d\n", #x, \
- stats.cio_irqs[ffs(DSI_CIO_IRQ_##x)-1]);
+ stats->cio_irqs[ffs(DSI_CIO_IRQ_##x)-1]);
seq_printf(s, "-- CIO interrupts --\n");
PIS(ERRSYNCESC1);
@@ -1122,6 +1126,8 @@ static int dsi_dump_dsi_irqs(struct seq_file *s, void *p)
PIS(ULPSACTIVENOT_ALL1);
#undef PIS
+ kfree(stats);
+
return 0;
}
#endif
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 598/885] HID: Add Mapping for System Microphone Mute
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (596 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 597/885] drm/omap: dsi: Fix excessive stack usage Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 599/885] drm/tiny: ili9486: Do not assume 8-bit only SPI controllers Greg Kroah-Hartman
` (289 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jingyuan Liang, Dmitry Torokhov,
Jiri Kosina, Sasha Levin
From: Jingyuan Liang <jingyliang@chromium.org>
[ Upstream commit 2d60f9f4f26785a00273cb81fe60eff129ebd449 ]
HUTRR110 added a new usage code for a key that is supposed to
mute/unmute microphone system-wide.
Map the new usage code(0x01 0xa9) to keycode KEY_MICMUTE.
Additionally hid-debug is adjusted to recognize this keycode as well.
Signed-off-by: Jingyuan Liang <jingyliang@chromium.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-debug.c | 1 +
drivers/hid/hid-input.c | 8 ++++++++
2 files changed, 9 insertions(+)
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 2ca6ab600bc9f..15e35702773cd 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -972,6 +972,7 @@ static const char *keys[KEY_MAX + 1] = {
[KEY_KBD_LAYOUT_NEXT] = "KbdLayoutNext",
[KEY_EMOJI_PICKER] = "EmojiPicker",
[KEY_DICTATE] = "Dictate",
+ [KEY_MICMUTE] = "MicrophoneMute",
[KEY_BRIGHTNESS_MIN] = "BrightnessMin",
[KEY_BRIGHTNESS_MAX] = "BrightnessMax",
[KEY_BRIGHTNESS_AUTO] = "BrightnessAuto",
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 7e94ca1822afb..8797ec7b29322 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -793,6 +793,14 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
break;
}
+ if ((usage->hid & 0xf0) == 0xa0) { /* SystemControl */
+ switch (usage->hid & 0xf) {
+ case 0x9: map_key_clear(KEY_MICMUTE); break;
+ default: goto ignore;
+ }
+ break;
+ }
+
if ((usage->hid & 0xf0) == 0xb0) { /* SC - Display */
switch (usage->hid & 0xf) {
case 0x05: map_key_clear(KEY_SWITCHVIDEOMODE); break;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 599/885] drm/tiny: ili9486: Do not assume 8-bit only SPI controllers
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (597 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 598/885] HID: Add Mapping for System Microphone Mute Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 600/885] drm/amd/display: Defer DIG FIFO disable after VID stream enable Greg Kroah-Hartman
` (288 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Neil Armstrong, Carlo Caione,
Kamlesh Gurudasani, Sasha Levin
From: Carlo Caione <ccaione@baylibre.com>
[ Upstream commit 77772e607522daa61f3af74df018559db75c43d6 ]
The pixel data for the ILI9486 is always 16-bits wide and it must be
sent over the SPI bus. When the controller is only able to deal with
8-bit transfers, this 16-bits data needs to be swapped before the
sending to account for the big endian bus, this is on the contrary not
needed when the SPI controller already supports 16-bits transfers.
The decision about swapping the pixel data or not is taken in the MIPI
DBI code by probing the controller capabilities: if the controller only
suppors 8-bit transfers the data is swapped, otherwise it is not.
This swapping/non-swapping is relying on the assumption that when the
controller does support 16-bit transactions then the data is sent
unswapped in 16-bits-per-word over SPI.
The problem with the ILI9486 driver is that it is forcing 8-bit
transactions also for controllers supporting 16-bits, violating the
assumption and corrupting the pixel data.
Align the driver to what is done in the MIPI DBI code by adjusting the
transfer size to the maximum allowed by the SPI controller.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116-s905x_spi_ili9486-v4-2-f86b4463b9e4@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/tiny/ili9486.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/tiny/ili9486.c b/drivers/gpu/drm/tiny/ili9486.c
index c80028bb1d110..7b3048a3d9086 100644
--- a/drivers/gpu/drm/tiny/ili9486.c
+++ b/drivers/gpu/drm/tiny/ili9486.c
@@ -43,6 +43,7 @@ static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
size_t num)
{
struct spi_device *spi = mipi->spi;
+ unsigned int bpw = 8;
void *data = par;
u32 speed_hz;
int i, ret;
@@ -56,8 +57,6 @@ static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
* The displays are Raspberry Pi HATs and connected to the 8-bit only
* SPI controller, so 16-bit command and parameters need byte swapping
* before being transferred as 8-bit on the big endian SPI bus.
- * Pixel data bytes have already been swapped before this function is
- * called.
*/
buf[0] = cpu_to_be16(*cmd);
gpiod_set_value_cansleep(mipi->dc, 0);
@@ -71,12 +70,18 @@ static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
for (i = 0; i < num; i++)
buf[i] = cpu_to_be16(par[i]);
num *= 2;
- speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
data = buf;
}
+ /*
+ * Check whether pixel data bytes needs to be swapped or not
+ */
+ if (*cmd == MIPI_DCS_WRITE_MEMORY_START && !mipi->swap_bytes)
+ bpw = 16;
+
gpiod_set_value_cansleep(mipi->dc, 1);
- ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, data, num);
+ speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
+ ret = mipi_dbi_spi_transfer(spi, speed_hz, bpw, data, num);
free:
kfree(buf);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 600/885] drm/amd/display: Defer DIG FIFO disable after VID stream enable
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (598 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 599/885] drm/tiny: ili9486: Do not assume 8-bit only SPI controllers Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 601/885] drm/radeon: free iio for atombios when driver shutdown Greg Kroah-Hartman
` (287 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Aurabindo Pillai,
Nicholas Kazlauskas, Syed Hassan, Daniel Wheeler, Alex Deucher,
Sasha Levin
From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
[ Upstream commit 2d90a1c054831338d57b39aec4d273cf3e867590 ]
[Why]
On some monitors we see a brief flash of corruption during the
monitor disable sequence caused by FIFO being disabled in the middle
of an active DP stream.
[How]
Wait until DP vid stream is disabled before turning off the FIFO.
The FIFO reset on DP unblank should take care of clearing any FIFO
error, if any.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c
index 38842f938bed0..0926db0183383 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c
@@ -278,10 +278,10 @@ static void enc314_stream_encoder_dp_blank(
struct dc_link *link,
struct stream_encoder *enc)
{
- /* New to DCN314 - disable the FIFO before VID stream disable. */
- enc314_disable_fifo(enc);
-
enc1_stream_encoder_dp_blank(link, enc);
+
+ /* Disable FIFO after the DP vid stream is disabled to avoid corruption. */
+ enc314_disable_fifo(enc);
}
static void enc314_stream_encoder_dp_unblank(
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 601/885] drm/radeon: free iio for atombios when driver shutdown
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (599 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 600/885] drm/amd/display: Defer DIG FIFO disable after VID stream enable Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 602/885] drm/amd: Avoid BUG() for case of SRIOV missing IP version Greg Kroah-Hartman
` (286 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Liwei Song, Alex Deucher, Sasha Levin
From: Liwei Song <liwei.song@windriver.com>
[ Upstream commit 4773fadedca918faec443daaca5e4ea1c0ced144 ]
Fix below kmemleak when unload radeon driver:
unreferenced object 0xffff9f8608ede200 (size 512):
comm "systemd-udevd", pid 326, jiffies 4294682822 (age 716.338s)
hex dump (first 32 bytes):
00 00 00 00 c4 aa ec aa 14 ab 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000062fadebe>] kmem_cache_alloc_trace+0x2f1/0x500
[<00000000b6883cea>] atom_parse+0x117/0x230 [radeon]
[<00000000158c23fd>] radeon_atombios_init+0xab/0x170 [radeon]
[<00000000683f672e>] si_init+0x57/0x750 [radeon]
[<00000000566cc31f>] radeon_device_init+0x559/0x9c0 [radeon]
[<0000000046efabb3>] radeon_driver_load_kms+0xc1/0x1a0 [radeon]
[<00000000b5155064>] drm_dev_register+0xdd/0x1d0
[<0000000045fec835>] radeon_pci_probe+0xbd/0x100 [radeon]
[<00000000e69ecca3>] pci_device_probe+0xe1/0x160
[<0000000019484b76>] really_probe.part.0+0xc1/0x2c0
[<000000003f2649da>] __driver_probe_device+0x96/0x130
[<00000000231c5bb1>] driver_probe_device+0x24/0xf0
[<0000000000a42377>] __driver_attach+0x77/0x190
[<00000000d7574da6>] bus_for_each_dev+0x7f/0xd0
[<00000000633166d2>] driver_attach+0x1e/0x30
[<00000000313b05b8>] bus_add_driver+0x12c/0x1e0
iio was allocated in atom_index_iio() called by atom_parse(),
but it doesn't got released when the dirver is shutdown.
Fix this kmemleak by free it in radeon_atombios_fini().
Signed-off-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/radeon/radeon_device.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index a556b6be11374..e1f3ab607e4f4 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -1023,6 +1023,7 @@ void radeon_atombios_fini(struct radeon_device *rdev)
{
if (rdev->mode_info.atom_context) {
kfree(rdev->mode_info.atom_context->scratch);
+ kfree(rdev->mode_info.atom_context->iio);
}
kfree(rdev->mode_info.atom_context);
rdev->mode_info.atom_context = NULL;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 602/885] drm/amd: Avoid BUG() for case of SRIOV missing IP version
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (600 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 601/885] drm/radeon: free iio for atombios when driver shutdown Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 603/885] drm/amdkfd: Page aligned memory reserve size Greg Kroah-Hartman
` (285 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alex Deucher, Lijo Lazar,
Mario Limonciello, Sasha Levin
From: Mario Limonciello <mario.limonciello@amd.com>
[ Upstream commit 93fec4f8c158584065134b4d45e875499bf517c8 ]
No need to crash the kernel. AMDGPU will now fail to probe.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index 712dd72f3ccf2..087147f09933a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -354,7 +354,7 @@ static int psp_init_sriov_microcode(struct psp_context *psp)
adev->virt.autoload_ucode_id = AMDGPU_UCODE_ID_CP_MES1_DATA;
break;
default:
- BUG();
+ ret = -EINVAL;
break;
}
return ret;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 603/885] drm/amdkfd: Page aligned memory reserve size
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (601 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 602/885] drm/amd: Avoid BUG() for case of SRIOV missing IP version Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 604/885] scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write Greg Kroah-Hartman
` (284 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Philip Yang, Felix Kuehling,
Alex Deucher, Sasha Levin
From: Philip Yang <Philip.Yang@amd.com>
[ Upstream commit 0c2dece8fb541ab07b68c3312a1065fa9c927a81 ]
Use page aligned size to reserve memory usage because page aligned TTM
BO size is used to unreserve memory usage, otherwise no page aligned
size causes memory usage accounting unbalanced.
Change vram_used definition type to int64_t to be able to trigger
WARN_ONCE(adev && adev->kfd.vram_used < 0, "..."), to help debug the
accounting issue with warning and backtrace.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 12 +++++++-----
drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 9 +++++++--
3 files changed, 15 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
index 30f145dc8724e..dbc842590b253 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
@@ -95,7 +95,7 @@ struct amdgpu_amdkfd_fence {
struct amdgpu_kfd_dev {
struct kfd_dev *dev;
- uint64_t vram_used;
+ int64_t vram_used;
uint64_t vram_used_aligned;
bool init_complete;
struct work_struct reset_work;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
index 404c839683b1c..da01c1424b4ad 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
@@ -1653,6 +1653,7 @@ int amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu(
struct amdgpu_bo *bo;
struct drm_gem_object *gobj = NULL;
u32 domain, alloc_domain;
+ uint64_t aligned_size;
u64 alloc_flags;
int ret;
@@ -1703,22 +1704,23 @@ int amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu(
* the memory.
*/
if ((*mem)->aql_queue)
- size = size >> 1;
+ size >>= 1;
+ aligned_size = PAGE_ALIGN(size);
(*mem)->alloc_flags = flags;
amdgpu_sync_create(&(*mem)->sync);
- ret = amdgpu_amdkfd_reserve_mem_limit(adev, size, flags);
+ ret = amdgpu_amdkfd_reserve_mem_limit(adev, aligned_size, flags);
if (ret) {
pr_debug("Insufficient memory\n");
goto err_reserve_limit;
}
pr_debug("\tcreate BO VA 0x%llx size 0x%llx domain %s\n",
- va, size, domain_string(alloc_domain));
+ va, (*mem)->aql_queue ? size << 1 : size, domain_string(alloc_domain));
- ret = amdgpu_gem_object_create(adev, size, 1, alloc_domain, alloc_flags,
+ ret = amdgpu_gem_object_create(adev, aligned_size, 1, alloc_domain, alloc_flags,
bo_type, NULL, &gobj);
if (ret) {
pr_debug("Failed to create BO on domain %s. ret %d\n",
@@ -1775,7 +1777,7 @@ int amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu(
/* Don't unreserve system mem limit twice */
goto err_reserve_limit;
err_bo_create:
- amdgpu_amdkfd_unreserve_mem_limit(adev, size, flags);
+ amdgpu_amdkfd_unreserve_mem_limit(adev, aligned_size, flags);
err_reserve_limit:
mutex_destroy(&(*mem)->lock);
if (gobj)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
index 6d291aa6386bd..f79b8e964140e 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
@@ -1127,8 +1127,13 @@ static int kfd_ioctl_alloc_memory_of_gpu(struct file *filep,
}
/* Update the VRAM usage count */
- if (flags & KFD_IOC_ALLOC_MEM_FLAGS_VRAM)
- WRITE_ONCE(pdd->vram_usage, pdd->vram_usage + args->size);
+ if (flags & KFD_IOC_ALLOC_MEM_FLAGS_VRAM) {
+ uint64_t size = args->size;
+
+ if (flags & KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM)
+ size >>= 1;
+ WRITE_ONCE(pdd->vram_usage, pdd->vram_usage + PAGE_ALIGN(size));
+ }
mutex_unlock(&p->mutex);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 604/885] scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (602 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 603/885] drm/amdkfd: Page aligned memory reserve size Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 605/885] Revert "fbcon: dont lose the console font across generic->chip driver switch" Greg Kroah-Hartman
` (283 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Justin Tee, Martin K. Petersen, Sasha Levin
From: Justin Tee <justin.tee@broadcom.com>
[ Upstream commit 21681b81b9ae548c5dae7ae00d931197a27f480c ]
During the sysfs firmware write process, a use-after-free read warning is
logged from the lpfc_wr_object() routine:
BUG: KFENCE: use-after-free read in lpfc_wr_object+0x235/0x310 [lpfc]
Use-after-free read at 0x0000000000cf164d (in kfence-#111):
lpfc_wr_object+0x235/0x310 [lpfc]
lpfc_write_firmware.cold+0x206/0x30d [lpfc]
lpfc_sli4_request_firmware_update+0xa6/0x100 [lpfc]
lpfc_request_firmware_upgrade_store+0x66/0xb0 [lpfc]
kernfs_fop_write_iter+0x121/0x1b0
new_sync_write+0x11c/0x1b0
vfs_write+0x1ef/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x59/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The driver accessed wr_object pointer data, which was initialized into
mailbox payload memory, after the mailbox object was released back to the
mailbox pool.
Fix by moving the mailbox free calls to the end of the routine ensuring
that we don't reference internal mailbox memory after release.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/lpfc/lpfc_sli.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 21c52154626f1..b93c948c4fcc4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -20802,6 +20802,7 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
struct lpfc_mbx_wr_object *wr_object;
LPFC_MBOXQ_t *mbox;
int rc = 0, i = 0;
+ int mbox_status = 0;
uint32_t shdr_status, shdr_add_status, shdr_add_status_2;
uint32_t shdr_change_status = 0, shdr_csf = 0;
uint32_t mbox_tmo;
@@ -20847,11 +20848,15 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
wr_object->u.request.bde_count = i;
bf_set(lpfc_wr_object_write_length, &wr_object->u.request, written);
if (!phba->sli4_hba.intr_enable)
- rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ mbox_status = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
- rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ mbox_status = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
+
+ /* The mbox status needs to be maintained to detect MBOX_TIMEOUT. */
+ rc = mbox_status;
+
/* The IOCTL status is embedded in the mailbox subheader. */
shdr_status = bf_get(lpfc_mbox_hdr_status,
&wr_object->header.cfg_shdr.response);
@@ -20866,10 +20871,6 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
&wr_object->u.response);
}
- if (!phba->sli4_hba.intr_enable)
- mempool_free(mbox, phba->mbox_mem_pool);
- else if (rc != MBX_TIMEOUT)
- mempool_free(mbox, phba->mbox_mem_pool);
if (shdr_status || shdr_add_status || shdr_add_status_2 || rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
"3025 Write Object mailbox failed with "
@@ -20887,6 +20888,12 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
lpfc_log_fw_write_cmpl(phba, shdr_status, shdr_add_status,
shdr_add_status_2, shdr_change_status,
shdr_csf);
+
+ if (!phba->sli4_hba.intr_enable)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ else if (mbox_status != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+
return rc;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 605/885] Revert "fbcon: dont lose the console font across generic->chip driver switch"
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (603 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 604/885] scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write Greg Kroah-Hartman
@ 2023-03-07 16:58 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 606/885] drm/amd: Avoid ASSERT for some message failures Greg Kroah-Hartman
` (282 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:58 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Thomas Zimmermann,
Javier Martinez Canillas, Sasha Levin
From: Thomas Zimmermann <tzimmermann@suse.de>
[ Upstream commit 12d5796d55f9fd9e4b621003127c99e176665064 ]
This reverts commit ae1287865f5361fa138d4d3b1b6277908b54eac9.
Always free the console font when deinitializing the framebuffer
console. Subsequent framebuffer consoles will then use the default
font. Rely on userspace to load any user-configured font for these
consoles.
Commit ae1287865f53 ("fbcon: don't lose the console font across
generic->chip driver switch") was introduced to work around losing
the font during graphics-device handover. [1][2] It kept a dangling
pointer with the font data between loading the two consoles, which is
fairly adventurous hack. It also never covered cases when the other
consoles, such as VGA text mode, where involved.
The problem has meanwhile been solved in userspace. Systemd comes
with a udev rule that re-installs the configured font when a console
comes up. [3] So the kernel workaround can be removed.
This also removes one of the two special cases triggered by setting
FBINFO_MISC_FIRMWARE in an fbdev driver.
Tested during device handover from efifb and simpledrm to radeon. Udev
reloads the configured console font for the new driver's terminal.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=892340 # 1
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1074624 # 2
Link: https://cgit.freedesktop.org/systemd/systemd/tree/src/vconsole/90-vconsole.rules.in?h=v222 # 3
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219160516.23436-3-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/core/fbcon.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 1b14c21af2b74..2bc8baa90c0f2 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -958,7 +958,7 @@ static const char *fbcon_startup(void)
set_blitting_type(vc, info);
/* Setup default font */
- if (!p->fontdata && !vc->vc_font.data) {
+ if (!p->fontdata) {
if (!fontname[0] || !(font = find_font(fontname)))
font = get_default_font(info->var.xres,
info->var.yres,
@@ -968,8 +968,6 @@ static const char *fbcon_startup(void)
vc->vc_font.height = font->height;
vc->vc_font.data = (void *)(p->fontdata = font->data);
vc->vc_font.charcount = font->charcount;
- } else {
- p->fontdata = vc->vc_font.data;
}
cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres);
@@ -1135,9 +1133,9 @@ static void fbcon_init(struct vc_data *vc, int init)
ops->p = &fb_display[fg_console];
}
-static void fbcon_free_font(struct fbcon_display *p, bool freefont)
+static void fbcon_free_font(struct fbcon_display *p)
{
- if (freefont && p->userfont && p->fontdata && (--REFCOUNT(p->fontdata) == 0))
+ if (p->userfont && p->fontdata && (--REFCOUNT(p->fontdata) == 0))
kfree(p->fontdata - FONT_EXTRA_WORDS * sizeof(int));
p->fontdata = NULL;
p->userfont = 0;
@@ -1172,8 +1170,8 @@ static void fbcon_deinit(struct vc_data *vc)
struct fb_info *info;
struct fbcon_ops *ops;
int idx;
- bool free_font = true;
+ fbcon_free_font(p);
idx = con2fb_map[vc->vc_num];
if (idx == -1)
@@ -1184,8 +1182,6 @@ static void fbcon_deinit(struct vc_data *vc)
if (!info)
goto finished;
- if (info->flags & FBINFO_MISC_FIRMWARE)
- free_font = false;
ops = info->fbcon_par;
if (!ops)
@@ -1197,9 +1193,8 @@ static void fbcon_deinit(struct vc_data *vc)
ops->initialized = false;
finished:
- fbcon_free_font(p, free_font);
- if (free_font)
- vc->vc_font.data = NULL;
+ fbcon_free_font(p);
+ vc->vc_font.data = NULL;
if (vc->vc_hi_font_mask && vc->vc_screenbuf)
set_vc_hi_font(vc, false);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 606/885] drm/amd: Avoid ASSERT for some message failures
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (604 preceding siblings ...)
2023-03-07 16:58 ` [PATCH 6.1 605/885] Revert "fbcon: dont lose the console font across generic->chip driver switch" Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 607/885] drm: amd: display: Fix memory leakage Greg Kroah-Hartman
` (281 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mario Limonciello, Harry Wentland,
Alex Deucher, Sasha Levin
From: Mario Limonciello <mario.limonciello@amd.com>
[ Upstream commit 3e5019ee67760cd61b2a5fd605e1289c2f92d983 ]
On DCN314 when resuming from s0i3 an ASSERT is shown indicating that
`VBIOSSMC_MSG_SetHardMinDcfclkByFreq` returned `VBIOSSMC_Result_Failed`.
This isn't a driver bug; it's a BIOS/configuration bug. To make this
easier to triage, add an explicit warning when this issue happens.
This matches the behavior utilized for failures with
`VBIOSSMC_MSG_TransferTableDram2Smu` configuration.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_smu.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_smu.c
index 2db595672a469..aa264c600408d 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_smu.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_smu.c
@@ -146,6 +146,9 @@ static int dcn314_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr,
if (msg_id == VBIOSSMC_MSG_TransferTableDram2Smu &&
param == TABLE_WATERMARKS)
DC_LOG_WARNING("Watermarks table not configured properly by SMU");
+ else if (msg_id == VBIOSSMC_MSG_SetHardMinDcfclkByFreq ||
+ msg_id == VBIOSSMC_MSG_SetMinDeepSleepDcfclk)
+ DC_LOG_WARNING("DCFCLK_DPM is not enabled by BIOS");
else
ASSERT(0);
REG_WRITE(MP1_SMN_C2PMSG_91, VBIOSSMC_Result_OK);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 607/885] drm: amd: display: Fix memory leakage
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (605 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 606/885] drm/amd: Avoid ASSERT for some message failures Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 608/885] drm/amd/display: fix mapping to non-allocated address Greg Kroah-Hartman
` (280 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Konstantin Meskhidze, Alex Deucher,
Sasha Levin
From: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
[ Upstream commit 6b8701be1f66064ca72733c5f6e13748cdbf8397 ]
This commit fixes memory leakage in dc_construct_ctx() function.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 5260ad6de8038..24015f8cac75a 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -878,6 +878,7 @@ static bool dc_construct_ctx(struct dc *dc,
dc_ctx->perf_trace = dc_perf_trace_create();
if (!dc_ctx->perf_trace) {
+ kfree(dc_ctx);
ASSERT_CRITICAL(false);
return false;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 608/885] drm/amd/display: fix mapping to non-allocated address
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (606 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 607/885] drm: amd: display: Fix memory leakage Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 609/885] HID: uclogic: Add frame type quirk Greg Kroah-Hartman
` (279 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Daniel Wheeler, Martin Leung,
Rodrigo Siqueira, Brandon Syu, Alex Deucher, Sasha Levin
From: Brandon Syu <Brandon.Syu@amd.com>
[ Upstream commit 9190d4a263264eabf715f5fc1827da45e3fdc247 ]
[Why]
There is an issue mapping non-allocated location of memory.
It would allocate gpio registers from an array out of bounds.
[How]
Patch correct numbers of bounds for using.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../gpu/drm/amd/display/dc/gpio/dcn20/hw_factory_dcn20.c | 6 ++++--
.../gpu/drm/amd/display/dc/gpio/dcn30/hw_factory_dcn30.c | 6 ++++--
.../gpu/drm/amd/display/dc/gpio/dcn32/hw_factory_dcn32.c | 6 ++++--
drivers/gpu/drm/amd/display/dc/gpio/ddc_regs.h | 7 +++++++
4 files changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/gpio/dcn20/hw_factory_dcn20.c b/drivers/gpu/drm/amd/display/dc/gpio/dcn20/hw_factory_dcn20.c
index 9b63c6c0cc844..e0bd0c722e006 100644
--- a/drivers/gpu/drm/amd/display/dc/gpio/dcn20/hw_factory_dcn20.c
+++ b/drivers/gpu/drm/amd/display/dc/gpio/dcn20/hw_factory_dcn20.c
@@ -138,7 +138,8 @@ static const struct ddc_sh_mask ddc_shift[] = {
DDC_MASK_SH_LIST_DCN2(__SHIFT, 3),
DDC_MASK_SH_LIST_DCN2(__SHIFT, 4),
DDC_MASK_SH_LIST_DCN2(__SHIFT, 5),
- DDC_MASK_SH_LIST_DCN2(__SHIFT, 6)
+ DDC_MASK_SH_LIST_DCN2(__SHIFT, 6),
+ DDC_MASK_SH_LIST_DCN2_VGA(__SHIFT)
};
static const struct ddc_sh_mask ddc_mask[] = {
@@ -147,7 +148,8 @@ static const struct ddc_sh_mask ddc_mask[] = {
DDC_MASK_SH_LIST_DCN2(_MASK, 3),
DDC_MASK_SH_LIST_DCN2(_MASK, 4),
DDC_MASK_SH_LIST_DCN2(_MASK, 5),
- DDC_MASK_SH_LIST_DCN2(_MASK, 6)
+ DDC_MASK_SH_LIST_DCN2(_MASK, 6),
+ DDC_MASK_SH_LIST_DCN2_VGA(_MASK)
};
#include "../generic_regs.h"
diff --git a/drivers/gpu/drm/amd/display/dc/gpio/dcn30/hw_factory_dcn30.c b/drivers/gpu/drm/amd/display/dc/gpio/dcn30/hw_factory_dcn30.c
index 687d4f128480e..36a5736c58c92 100644
--- a/drivers/gpu/drm/amd/display/dc/gpio/dcn30/hw_factory_dcn30.c
+++ b/drivers/gpu/drm/amd/display/dc/gpio/dcn30/hw_factory_dcn30.c
@@ -145,7 +145,8 @@ static const struct ddc_sh_mask ddc_shift[] = {
DDC_MASK_SH_LIST_DCN2(__SHIFT, 3),
DDC_MASK_SH_LIST_DCN2(__SHIFT, 4),
DDC_MASK_SH_LIST_DCN2(__SHIFT, 5),
- DDC_MASK_SH_LIST_DCN2(__SHIFT, 6)
+ DDC_MASK_SH_LIST_DCN2(__SHIFT, 6),
+ DDC_MASK_SH_LIST_DCN2_VGA(__SHIFT)
};
static const struct ddc_sh_mask ddc_mask[] = {
@@ -154,7 +155,8 @@ static const struct ddc_sh_mask ddc_mask[] = {
DDC_MASK_SH_LIST_DCN2(_MASK, 3),
DDC_MASK_SH_LIST_DCN2(_MASK, 4),
DDC_MASK_SH_LIST_DCN2(_MASK, 5),
- DDC_MASK_SH_LIST_DCN2(_MASK, 6)
+ DDC_MASK_SH_LIST_DCN2(_MASK, 6),
+ DDC_MASK_SH_LIST_DCN2_VGA(_MASK)
};
#include "../generic_regs.h"
diff --git a/drivers/gpu/drm/amd/display/dc/gpio/dcn32/hw_factory_dcn32.c b/drivers/gpu/drm/amd/display/dc/gpio/dcn32/hw_factory_dcn32.c
index 0ea52ba5ac827..9f6872ae40203 100644
--- a/drivers/gpu/drm/amd/display/dc/gpio/dcn32/hw_factory_dcn32.c
+++ b/drivers/gpu/drm/amd/display/dc/gpio/dcn32/hw_factory_dcn32.c
@@ -149,7 +149,8 @@ static const struct ddc_sh_mask ddc_shift[] = {
DDC_MASK_SH_LIST_DCN2(__SHIFT, 3),
DDC_MASK_SH_LIST_DCN2(__SHIFT, 4),
DDC_MASK_SH_LIST_DCN2(__SHIFT, 5),
- DDC_MASK_SH_LIST_DCN2(__SHIFT, 6)
+ DDC_MASK_SH_LIST_DCN2(__SHIFT, 6),
+ DDC_MASK_SH_LIST_DCN2_VGA(__SHIFT)
};
static const struct ddc_sh_mask ddc_mask[] = {
@@ -158,7 +159,8 @@ static const struct ddc_sh_mask ddc_mask[] = {
DDC_MASK_SH_LIST_DCN2(_MASK, 3),
DDC_MASK_SH_LIST_DCN2(_MASK, 4),
DDC_MASK_SH_LIST_DCN2(_MASK, 5),
- DDC_MASK_SH_LIST_DCN2(_MASK, 6)
+ DDC_MASK_SH_LIST_DCN2(_MASK, 6),
+ DDC_MASK_SH_LIST_DCN2_VGA(_MASK)
};
#include "../generic_regs.h"
diff --git a/drivers/gpu/drm/amd/display/dc/gpio/ddc_regs.h b/drivers/gpu/drm/amd/display/dc/gpio/ddc_regs.h
index 308a543178a56..59884ef651b39 100644
--- a/drivers/gpu/drm/amd/display/dc/gpio/ddc_regs.h
+++ b/drivers/gpu/drm/amd/display/dc/gpio/ddc_regs.h
@@ -113,6 +113,13 @@
(PHY_AUX_CNTL__AUX## cd ##_PAD_RXSEL## mask_sh),\
(DC_GPIO_AUX_CTRL_5__DDC_PAD## cd ##_I2CMODE## mask_sh)}
+#define DDC_MASK_SH_LIST_DCN2_VGA(mask_sh) \
+ {DDC_MASK_SH_LIST_COMMON(mask_sh),\
+ 0,\
+ 0,\
+ 0,\
+ 0}
+
struct ddc_registers {
struct gpio_registers gpio;
uint32_t ddc_setup;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 609/885] HID: uclogic: Add frame type quirk
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (607 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 608/885] drm/amd/display: fix mapping to non-allocated address Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 610/885] HID: uclogic: Add battery quirk Greg Kroah-Hartman
` (278 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mia Kanashi, Andreas Grosse,
José Expósito, Jiri Kosina, Sasha Levin
From: José Expósito <jose.exposito89@gmail.com>
[ Upstream commit 14b71e6ad8ca59dd734c7fa9676f3d60bddee2a9 ]
The report descriptor used to get information about UGEE v2 devices is
incorrect in the XP-PEN Deco Pro SW. It indicates that the device frame
is of type UCLOGIC_PARAMS_FRAME_BUTTONS but the device has a frame of
type UCLOGIC_PARAMS_FRAME_MOUSE.
Here is the original report descriptor:
0x0e 0x03 0xc8 0xb3 0x34 0x65 0x08 0x00 0xff 0x1f 0xd8 0x13 0x00 0x00
^ This byte should be 2
Add a quirk to be able to fix the reported frame type.
Tested-by: Mia Kanashi <chad@redpilled.dev>
Tested-by: Andreas Grosse <andig.mail@t-online.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-uclogic-core.c | 20 +-------------------
drivers/hid/hid-uclogic-params.c | 5 +++++
drivers/hid/hid-uclogic-params.h | 23 +++++++++++++++++++++++
3 files changed, 29 insertions(+), 19 deletions(-)
diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
index cfbbc39807a69..739984b8fa1b8 100644
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -22,25 +22,6 @@
#include "hid-ids.h"
-/* Driver data */
-struct uclogic_drvdata {
- /* Interface parameters */
- struct uclogic_params params;
- /* Pointer to the replacement report descriptor. NULL if none. */
- __u8 *desc_ptr;
- /*
- * Size of the replacement report descriptor.
- * Only valid if desc_ptr is not NULL
- */
- unsigned int desc_size;
- /* Pen input device */
- struct input_dev *pen_input;
- /* In-range timer */
- struct timer_list inrange_timer;
- /* Last rotary encoder state, or U8_MAX for none */
- u8 re_state;
-};
-
/**
* uclogic_inrange_timeout - handle pen in-range state timeout.
* Emulate input events normally generated when pen goes out of range for
@@ -202,6 +183,7 @@ static int uclogic_probe(struct hid_device *hdev,
}
timer_setup(&drvdata->inrange_timer, uclogic_inrange_timeout, 0);
drvdata->re_state = U8_MAX;
+ drvdata->quirks = id->driver_data;
hid_set_drvdata(hdev, drvdata);
/* Initialize the device and retrieve interface parameters */
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 3c5eea3df3288..e052538a62fb3 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -1298,6 +1298,7 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
struct hid_device *hdev)
{
int rc = 0;
+ struct uclogic_drvdata *drvdata;
struct usb_interface *iface;
__u8 bInterfaceNumber;
const int str_desc_len = 12;
@@ -1316,6 +1317,7 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
goto cleanup;
}
+ drvdata = hid_get_drvdata(hdev);
iface = to_usb_interface(hdev->dev.parent);
bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
@@ -1382,6 +1384,9 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
p.pen.subreport_list[0].id = UCLOGIC_RDESC_V1_FRAME_ID;
/* Initialize the frame interface */
+ if (drvdata->quirks & UCLOGIC_MOUSE_FRAME_QUIRK)
+ frame_type = UCLOGIC_PARAMS_FRAME_MOUSE;
+
switch (frame_type) {
case UCLOGIC_PARAMS_FRAME_DIAL:
case UCLOGIC_PARAMS_FRAME_MOUSE:
diff --git a/drivers/hid/hid-uclogic-params.h b/drivers/hid/hid-uclogic-params.h
index a97477c02ff82..10a05c7fd9398 100644
--- a/drivers/hid/hid-uclogic-params.h
+++ b/drivers/hid/hid-uclogic-params.h
@@ -19,6 +19,8 @@
#include <linux/usb.h>
#include <linux/hid.h>
+#define UCLOGIC_MOUSE_FRAME_QUIRK BIT(0)
+
/* Types of pen in-range reporting */
enum uclogic_params_pen_inrange {
/* Normal reports: zero - out of proximity, one - in proximity */
@@ -215,6 +217,27 @@ struct uclogic_params {
struct uclogic_params_frame frame_list[3];
};
+/* Driver data */
+struct uclogic_drvdata {
+ /* Interface parameters */
+ struct uclogic_params params;
+ /* Pointer to the replacement report descriptor. NULL if none. */
+ __u8 *desc_ptr;
+ /*
+ * Size of the replacement report descriptor.
+ * Only valid if desc_ptr is not NULL
+ */
+ unsigned int desc_size;
+ /* Pen input device */
+ struct input_dev *pen_input;
+ /* In-range timer */
+ struct timer_list inrange_timer;
+ /* Last rotary encoder state, or U8_MAX for none */
+ u8 re_state;
+ /* Device quirks */
+ unsigned long quirks;
+};
+
/* Initialize a tablet interface and discover its parameters */
extern int uclogic_params_init(struct uclogic_params *params,
struct hid_device *hdev);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 610/885] HID: uclogic: Add battery quirk
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (608 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 609/885] HID: uclogic: Add frame type quirk Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 611/885] HID: uclogic: Add support for XP-PEN Deco Pro SW Greg Kroah-Hartman
` (277 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mia Kanashi, Andreas Grosse,
José Expósito, Jiri Kosina, Sasha Levin
From: José Expósito <jose.exposito89@gmail.com>
[ Upstream commit f60c377f52de37f8705c5fc6d57737fdaf309ff9 ]
Some UGEE v2 tablets have a wireless version with an internal battery
and their firmware is able to report their battery level.
However, there was not found a field on their descriptor indicating
whether the tablet has battery or not, making it mandatory to classify
such devices through the UCLOGIC_BATTERY_QUIRK quirk.
Tested-by: Mia Kanashi <chad@redpilled.dev>
Tested-by: Andreas Grosse <andig.mail@t-online.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-uclogic-params.c | 5 +++++
drivers/hid/hid-uclogic-params.h | 1 +
2 files changed, 6 insertions(+)
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index e052538a62fb3..23624d5b07b5a 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -1222,6 +1222,11 @@ static int uclogic_params_ugee_v2_init_frame_mouse(struct uclogic_params *p)
*/
static bool uclogic_params_ugee_v2_has_battery(struct hid_device *hdev)
{
+ struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
+
+ if (drvdata->quirks & UCLOGIC_BATTERY_QUIRK)
+ return true;
+
/* The XP-PEN Deco LW vendor, product and version are identical to the
* Deco L. The only difference reported by their firmware is the product
* name. Add a quirk to support battery reporting on the wireless
diff --git a/drivers/hid/hid-uclogic-params.h b/drivers/hid/hid-uclogic-params.h
index 10a05c7fd9398..b0e7f3807939b 100644
--- a/drivers/hid/hid-uclogic-params.h
+++ b/drivers/hid/hid-uclogic-params.h
@@ -20,6 +20,7 @@
#include <linux/hid.h>
#define UCLOGIC_MOUSE_FRAME_QUIRK BIT(0)
+#define UCLOGIC_BATTERY_QUIRK BIT(1)
/* Types of pen in-range reporting */
enum uclogic_params_pen_inrange {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 611/885] HID: uclogic: Add support for XP-PEN Deco Pro SW
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (609 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 610/885] HID: uclogic: Add battery quirk Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 612/885] HID: uclogic: Add support for XP-PEN Deco Pro MW Greg Kroah-Hartman
` (276 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, José Expósito,
Jiri Kosina, Sasha Levin
From: José Expósito <jose.exposito89@gmail.com>
[ Upstream commit 7744ca571af55b794595cff2da9d51a26904998f ]
The XP-PEN Deco Pro SW is a UGEE v2 device with a frame with 8 buttons,
a bitmap dial and a mouse; however, the UCLOGIC_MOUSE_FRAME_QUIRK is
required because it reports an incorrect frame type. Its pen has 2
buttons, supports tilt and pressure.
It can be connected using a USB cable or, to use it in wireless mode,
using a USB Bluetooth dongle. When it is connected in wireless mode the
device battery is used to power it.
All the pieces to support it are already in place. Add its ID and
quirks in order to support the device.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-input.c | 2 ++
drivers/hid/hid-uclogic-core.c | 3 +++
drivers/hid/hid-uclogic-params.c | 2 ++
4 files changed, 8 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 9e36b4cd905ee..c662994d73381 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1300,6 +1300,7 @@
#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01_V2 0x0905
#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L 0x0935
#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S 0x0909
+#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW 0x0933
#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06 0x0078
#define USB_DEVICE_ID_UGEE_TABLET_G5 0x0074
#define USB_DEVICE_ID_UGEE_TABLET_EX07S 0x0071
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 8797ec7b29322..fd8fe2594a61f 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -378,6 +378,8 @@ static const struct hid_device_id hid_battery_quirks[] = {
HID_BATTERY_QUIRK_IGNORE },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L),
HID_BATTERY_QUIRK_AVOID_QUERY },
+ { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW),
+ HID_BATTERY_QUIRK_AVOID_QUERY },
{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15),
HID_BATTERY_QUIRK_IGNORE },
{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15T_DR100),
diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
index 739984b8fa1b8..7c05d38d3afad 100644
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -513,6 +513,9 @@ static const struct hid_device_id uclogic_devices[] = {
USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
+ USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW),
+ .driver_data = UCLOGIC_MOUSE_FRAME_QUIRK | UCLOGIC_BATTERY_QUIRK },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06) },
{ }
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 23624d5b07b5a..492a30f83575a 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -1671,6 +1671,8 @@ int uclogic_params_init(struct uclogic_params *params,
USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L):
case VID_PID(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S):
+ case VID_PID(USB_VENDOR_ID_UGEE,
+ USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW):
rc = uclogic_params_ugee_v2_init(&p, hdev);
if (rc != 0)
goto cleanup;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 612/885] HID: uclogic: Add support for XP-PEN Deco Pro MW
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (610 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 611/885] HID: uclogic: Add support for XP-PEN Deco Pro SW Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 613/885] drm/msm/dsi: Add missing check for alloc_ordered_workqueue Greg Kroah-Hartman
` (275 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andreas Grosse,
José Expósito, Jiri Kosina, Sasha Levin
From: José Expósito <jose.exposito89@gmail.com>
[ Upstream commit 9266a88156d1fbb8e50d6eeff7bac44ad4eaecc2 ]
The XP-PEN Deco Pro MW is a UGEE v2 device with a frame with 8 buttons,
a bitmap dial and a mouse. Its pen has 2 buttons, supports tilt and
pressure.
It can be connected using a USB cable or, to use it in wireless mode,
using a USB Bluetooth dongle. When it is connected in wireless mode the
device battery is used to power it.
All the pieces to support it are already in place. Add its ID and
quirks in order to support the device.
Link: https://github.com/DIGImend/digimend-kernel-drivers/issues/622
Tested-by: Andreas Grosse <andig.mail@t-online.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-input.c | 2 ++
drivers/hid/hid-uclogic-core.c | 3 +++
drivers/hid/hid-uclogic-params.c | 2 ++
4 files changed, 8 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index c662994d73381..2235d78784b1b 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1299,6 +1299,7 @@
#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01 0x0042
#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01_V2 0x0905
#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L 0x0935
+#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_MW 0x0934
#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S 0x0909
#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW 0x0933
#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06 0x0078
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index fd8fe2594a61f..c3f80b516f398 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -378,6 +378,8 @@ static const struct hid_device_id hid_battery_quirks[] = {
HID_BATTERY_QUIRK_IGNORE },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L),
HID_BATTERY_QUIRK_AVOID_QUERY },
+ { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_MW),
+ HID_BATTERY_QUIRK_AVOID_QUERY },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW),
HID_BATTERY_QUIRK_AVOID_QUERY },
{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15),
diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
index 7c05d38d3afad..bfbb51f8b5beb 100644
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -511,6 +511,9 @@ static const struct hid_device_id uclogic_devices[] = {
USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01_V2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
+ USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_MW),
+ .driver_data = UCLOGIC_MOUSE_FRAME_QUIRK | UCLOGIC_BATTERY_QUIRK },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 492a30f83575a..0cc03c11ecc22 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -1669,6 +1669,8 @@ int uclogic_params_init(struct uclogic_params *params,
USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01_V2):
case VID_PID(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L):
+ case VID_PID(USB_VENDOR_ID_UGEE,
+ USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_MW):
case VID_PID(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S):
case VID_PID(USB_VENDOR_ID_UGEE,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 613/885] drm/msm/dsi: Add missing check for alloc_ordered_workqueue
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (611 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 612/885] HID: uclogic: Add support for XP-PEN Deco Pro MW Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 614/885] drm: rcar-du: Add quirk for H3 ES1.x pclk workaround Greg Kroah-Hartman
` (274 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiasheng Jiang, Abhinav Kumar,
Dmitry Baryshkov, Sasha Levin
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ Upstream commit 115906ca7b535afb1fe7b5406c566ccd3873f82b ]
Add check for the return value of alloc_ordered_workqueue as it may return
NULL pointer and cause NULL pointer dereference.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/517646/
Link: https://lore.kernel.org/r/20230110021651.12770-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/dsi/dsi_host.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 89aadd3b3202b..f167a45f1fbdd 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -1977,6 +1977,9 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
/* setup workqueue */
msm_host->workqueue = alloc_ordered_workqueue("dsi_drm_work", 0);
+ if (!msm_host->workqueue)
+ return -ENOMEM;
+
INIT_WORK(&msm_host->err_work, dsi_err_worker);
msm_dsi->id = msm_host->id;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 614/885] drm: rcar-du: Add quirk for H3 ES1.x pclk workaround
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (612 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 613/885] drm/msm/dsi: Add missing check for alloc_ordered_workqueue Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 615/885] drm: rcar-du: Fix setting a reserved bit in DPLLCR Greg Kroah-Hartman
` (273 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tomi Valkeinen, Laurent Pinchart,
Sasha Levin
From: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
[ Upstream commit 4f548bc48a2b4c4e54eecfddb6f7d24aa1b98768 ]
rcar_du_crtc.c does a soc_device_match() in
rcar_du_crtc_set_display_timing() to find out if the SoC is H3 ES1.x, and
if so, apply a workaround.
We will need another H3 ES1.x check in the following patch, so rather than
adding more soc_device_match() calls, let's add a rcar_du_device_info
entry for the ES1, and a quirk flag,
RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY, for the workaround.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 8 +----
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 48 ++++++++++++++++++++++++++
drivers/gpu/drm/rcar-du/rcar_du_drv.h | 1 +
3 files changed, 50 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 3619e1ddeb620..f2d3266509cc1 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -10,7 +10,6 @@
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
-#include <linux/sys_soc.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
@@ -204,11 +203,6 @@ static void rcar_du_escr_divider(struct clk *clk, unsigned long target,
}
}
-static const struct soc_device_attribute rcar_du_r8a7795_es1[] = {
- { .soc_id = "r8a7795", .revision = "ES1.*" },
- { /* sentinel */ }
-};
-
static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
{
const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode;
@@ -238,7 +232,7 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
* no post-divider when a display PLL is present (as shown by
* the workaround breaking HDMI output on M3-W during testing).
*/
- if (soc_device_match(rcar_du_r8a7795_es1)) {
+ if (rcdu->info->quirks & RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY) {
target *= 2;
div = 1;
}
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index a2776f1d6f2c2..0dada0646b2eb 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include <linux/wait.h>
#include <drm/drm_atomic_helper.h>
@@ -386,6 +387,42 @@ static const struct rcar_du_device_info rcar_du_r8a7795_info = {
.dpll_mask = BIT(2) | BIT(1),
};
+static const struct rcar_du_device_info rcar_du_r8a7795_es1_info = {
+ .gen = 3,
+ .features = RCAR_DU_FEATURE_CRTC_IRQ
+ | RCAR_DU_FEATURE_CRTC_CLOCK
+ | RCAR_DU_FEATURE_VSP1_SOURCE
+ | RCAR_DU_FEATURE_INTERLACED
+ | RCAR_DU_FEATURE_TVM_SYNC,
+ .quirks = RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY,
+ .channels_mask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
+ .routes = {
+ /*
+ * R8A7795 has one RGB output, two HDMI outputs and one
+ * LVDS output.
+ */
+ [RCAR_DU_OUTPUT_DPAD0] = {
+ .possible_crtcs = BIT(3),
+ .port = 0,
+ },
+ [RCAR_DU_OUTPUT_HDMI0] = {
+ .possible_crtcs = BIT(1),
+ .port = 1,
+ },
+ [RCAR_DU_OUTPUT_HDMI1] = {
+ .possible_crtcs = BIT(2),
+ .port = 2,
+ },
+ [RCAR_DU_OUTPUT_LVDS0] = {
+ .possible_crtcs = BIT(0),
+ .port = 3,
+ },
+ },
+ .num_lvds = 1,
+ .num_rpf = 5,
+ .dpll_mask = BIT(2) | BIT(1),
+};
+
static const struct rcar_du_device_info rcar_du_r8a7796_info = {
.gen = 3,
.features = RCAR_DU_FEATURE_CRTC_IRQ
@@ -554,6 +591,11 @@ static const struct of_device_id rcar_du_of_table[] = {
MODULE_DEVICE_TABLE(of, rcar_du_of_table);
+static const struct soc_device_attribute rcar_du_soc_table[] = {
+ { .soc_id = "r8a7795", .revision = "ES1.*", .data = &rcar_du_r8a7795_es1_info },
+ { /* sentinel */ }
+};
+
const char *rcar_du_output_name(enum rcar_du_output output)
{
static const char * const names[] = {
@@ -645,6 +687,7 @@ static void rcar_du_shutdown(struct platform_device *pdev)
static int rcar_du_probe(struct platform_device *pdev)
{
+ const struct soc_device_attribute *soc_attr;
struct rcar_du_device *rcdu;
unsigned int mask;
int ret;
@@ -659,8 +702,13 @@ static int rcar_du_probe(struct platform_device *pdev)
return PTR_ERR(rcdu);
rcdu->dev = &pdev->dev;
+
rcdu->info = of_device_get_match_data(rcdu->dev);
+ soc_attr = soc_device_match(rcar_du_soc_table);
+ if (soc_attr)
+ rcdu->info = soc_attr->data;
+
platform_set_drvdata(pdev, rcdu);
/* I/O resources */
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
index 5cfa2bb7ad93d..df87ccab146f4 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -34,6 +34,7 @@ struct rcar_du_device;
#define RCAR_DU_FEATURE_NO_BLENDING BIT(5) /* PnMR.SPIM does not have ALP nor EOR bits */
#define RCAR_DU_QUIRK_ALIGN_128B BIT(0) /* Align pitches to 128 bytes */
+#define RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY BIT(1) /* H3 ES1 has pclk stability issue */
enum rcar_du_output {
RCAR_DU_OUTPUT_DPAD0,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 615/885] drm: rcar-du: Fix setting a reserved bit in DPLLCR
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (613 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 614/885] drm: rcar-du: Add quirk for H3 ES1.x pclk workaround Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 616/885] drm/drm_print: correct format problem Greg Kroah-Hartman
` (272 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tomi Valkeinen, Laurent Pinchart,
Sasha Levin
From: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
[ Upstream commit 5fbc2f3b91d27e12b614947048764099570cbb55 ]
On H3 ES1.x two bits in DPLLCR are used to select the DU input dot clock
source. These are bits 20 and 21 for DU2, and bits 22 and 23 for DU1. On
non-ES1.x, only the higher bits are used (bits 21 and 23), and the lower
bits are reserved and should be set to 0.
The current code always sets the lower bits, even on non-ES1.x.
For both DU1 and DU2, on all SoC versions, when writing zeroes to those
bits the input clock is DCLKIN, and thus there's no difference between
ES1.x and non-ES1.x.
For DU1, writing 0b10 to the bits (or only writing the higher bit)
results in using PLL0 as the input clock, so in this case there's also
no difference between ES1.x and non-ES1.x.
However, for DU2, writing 0b10 to the bits results in using PLL0 as the
input clock on ES1.x, whereas on non-ES1.x it results in using PLL1. On
ES1.x you need to write 0b11 to select PLL1.
The current code always writes 0b11 to PLCS0 field to select PLL1 on all
SoC versions, which works but causes an illegal (in the sense of not
allowed by the documentation) write to a reserved bit field.
To remove the illegal bit write on PLSC0 we need to handle the input dot
clock selection differently for ES1.x and non-ES1.x.
Add a new quirk, RCAR_DU_QUIRK_H3_ES1_PLL, for this. This way we can
always set the bit 21 on PLSC0 when choosing the PLL as the source
clock, and additionally set the bit 20 when on ES1.x.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 23 ++++++++++++++++++++---
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 3 ++-
drivers/gpu/drm/rcar-du/rcar_du_drv.h | 1 +
drivers/gpu/drm/rcar-du/rcar_du_regs.h | 8 ++------
4 files changed, 25 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index f2d3266509cc1..b7dd59fe119e6 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -245,13 +245,30 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
| DPLLCR_N(dpll.n) | DPLLCR_M(dpll.m)
| DPLLCR_STBY;
- if (rcrtc->index == 1)
+ if (rcrtc->index == 1) {
dpllcr |= DPLLCR_PLCS1
| DPLLCR_INCS_DOTCLKIN1;
- else
- dpllcr |= DPLLCR_PLCS0
+ } else {
+ dpllcr |= DPLLCR_PLCS0_PLL
| DPLLCR_INCS_DOTCLKIN0;
+ /*
+ * On ES2.x we have a single mux controlled via bit 21,
+ * which selects between DCLKIN source (bit 21 = 0) and
+ * a PLL source (bit 21 = 1), where the PLL is always
+ * PLL1.
+ *
+ * On ES1.x we have an additional mux, controlled
+ * via bit 20, for choosing between PLL0 (bit 20 = 0)
+ * and PLL1 (bit 20 = 1). We always want to use PLL1,
+ * so on ES1.x, in addition to setting bit 21, we need
+ * to set the bit 20.
+ */
+
+ if (rcdu->info->quirks & RCAR_DU_QUIRK_H3_ES1_PLL)
+ dpllcr |= DPLLCR_PLCS0_H3ES1X_PLL1;
+ }
+
rcar_du_group_write(rcrtc->group, DPLLCR, dpllcr);
escr = ESCR_DCLKSEL_DCLKIN | div;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 0dada0646b2eb..6381578c4db58 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -394,7 +394,8 @@ static const struct rcar_du_device_info rcar_du_r8a7795_es1_info = {
| RCAR_DU_FEATURE_VSP1_SOURCE
| RCAR_DU_FEATURE_INTERLACED
| RCAR_DU_FEATURE_TVM_SYNC,
- .quirks = RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY,
+ .quirks = RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY
+ | RCAR_DU_QUIRK_H3_ES1_PLL,
.channels_mask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
.routes = {
/*
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
index df87ccab146f4..acc3673fefe18 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -35,6 +35,7 @@ struct rcar_du_device;
#define RCAR_DU_QUIRK_ALIGN_128B BIT(0) /* Align pitches to 128 bytes */
#define RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY BIT(1) /* H3 ES1 has pclk stability issue */
+#define RCAR_DU_QUIRK_H3_ES1_PLL BIT(2) /* H3 ES1 PLL setup differs from non-ES1 */
enum rcar_du_output {
RCAR_DU_OUTPUT_DPAD0,
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_regs.h b/drivers/gpu/drm/rcar-du/rcar_du_regs.h
index c1bcb0e8b5b4e..789ae9285108e 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_regs.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_regs.h
@@ -283,12 +283,8 @@
#define DPLLCR 0x20044
#define DPLLCR_CODE (0x95 << 24)
#define DPLLCR_PLCS1 (1 << 23)
-/*
- * PLCS0 is bit 21, but H3 ES1.x requires bit 20 to be set as well. As bit 20
- * isn't implemented by other SoC in the Gen3 family it can safely be set
- * unconditionally.
- */
-#define DPLLCR_PLCS0 (3 << 20)
+#define DPLLCR_PLCS0_PLL (1 << 21)
+#define DPLLCR_PLCS0_H3ES1X_PLL1 (1 << 20)
#define DPLLCR_CLKE (1 << 18)
#define DPLLCR_FDPLL(n) ((n) << 12)
#define DPLLCR_N(n) ((n) << 5)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 616/885] drm/drm_print: correct format problem
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (614 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 615/885] drm: rcar-du: Fix setting a reserved bit in DPLLCR Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 617/885] drm/amd/display: Set hvm_enabled flag for S/G mode Greg Kroah-Hartman
` (271 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wayne Lin, Harry Wentland,
Lyude Paul, Alex Deucher, Sasha Levin
From: Wayne Lin <Wayne.Lin@amd.com>
[ Upstream commit d987150b539271b0394f24c1c648d2846662adb4 ]
[why & how]
__drm_dbg() parameter set format is wrong and not aligned with the
format under CONFIG_DRM_USE_DYNAMIC_DEBUG is on. Fix it.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/drm/drm_print.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
index a44fb7ef257f6..094ded23534c7 100644
--- a/include/drm/drm_print.h
+++ b/include/drm/drm_print.h
@@ -521,7 +521,7 @@ __printf(1, 2)
void __drm_err(const char *format, ...);
#if !defined(CONFIG_DRM_USE_DYNAMIC_DEBUG)
-#define __drm_dbg(fmt, ...) ___drm_dbg(NULL, fmt, ##__VA_ARGS__)
+#define __drm_dbg(cat, fmt, ...) ___drm_dbg(NULL, cat, fmt, ##__VA_ARGS__)
#else
#define __drm_dbg(cat, fmt, ...) \
_dynamic_func_call_cls(cat, fmt, ___drm_dbg, \
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 617/885] drm/amd/display: Set hvm_enabled flag for S/G mode
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (615 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 616/885] drm/drm_print: correct format problem Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 618/885] habanalabs: extend fatal messages to contain PCI info Greg Kroah-Hartman
` (270 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nicholas Kazlauskas, Alan Liu,
Roman Li, Daniel Wheeler, Alex Deucher, Sasha Levin
From: Roman Li <roman.li@amd.com>
[ Upstream commit 40e9f3f067bc6fb47b878f8ba0a9cc7b93abbf49 ]
[Why]
After enabling S/G on dcn314 a screen corruption may be observed.
HostVM flag should be set in S/G mode to be included in DML calculations.
[How]
In S/G mode gpu_vm_support flag is set.
Use its value to init is_hvm_enabled.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 25ffc51ae6fa7..050e7a52c8f62 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1240,7 +1240,7 @@ static void mmhub_read_system_context(struct amdgpu_device *adev, struct dc_phy_
pa_config->gart_config.page_table_end_addr = page_table_end.quad_part << 12;
pa_config->gart_config.page_table_base_addr = page_table_base.quad_part;
- pa_config->is_hvm_enabled = 0;
+ pa_config->is_hvm_enabled = adev->mode_info.gpu_vm_support;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 618/885] habanalabs: extend fatal messages to contain PCI info
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (616 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 617/885] drm/amd/display: Set hvm_enabled flag for S/G mode Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 619/885] habanalabs: fix bug in timestamps registration code Greg Kroah-Hartman
` (269 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Moti Haimovski, Oded Gabbay, Sasha Levin
From: Moti Haimovski <mhaimovski@habana.ai>
[ Upstream commit 2a0a839b6a28f7c4c528bb75b740c7f38ef79a37 ]
This commit attaches the PCI device address to driver fatal messages
in order to ease debugging in multi-device setups.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/habanalabs/common/device.c | 38 ++++++++++++++++---------
1 file changed, 25 insertions(+), 13 deletions(-)
diff --git a/drivers/misc/habanalabs/common/device.c b/drivers/misc/habanalabs/common/device.c
index 233d8b46c831f..e0dca445abf14 100644
--- a/drivers/misc/habanalabs/common/device.c
+++ b/drivers/misc/habanalabs/common/device.c
@@ -1458,7 +1458,8 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
if (rc == -EBUSY) {
if (hdev->device_fini_pending) {
dev_crit(hdev->dev,
- "Failed to kill all open processes, stopping hard reset\n");
+ "%s Failed to kill all open processes, stopping hard reset\n",
+ dev_name(&(hdev)->pdev->dev));
goto out_err;
}
@@ -1468,7 +1469,8 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
if (rc) {
dev_crit(hdev->dev,
- "Failed to kill all open processes, stopping hard reset\n");
+ "%s Failed to kill all open processes, stopping hard reset\n",
+ dev_name(&(hdev)->pdev->dev));
goto out_err;
}
@@ -1519,14 +1521,16 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
* ensure driver puts the driver in a unusable state
*/
dev_crit(hdev->dev,
- "Consecutive FW fatal errors received, stopping hard reset\n");
+ "%s Consecutive FW fatal errors received, stopping hard reset\n",
+ dev_name(&(hdev)->pdev->dev));
rc = -EIO;
goto out_err;
}
if (hdev->kernel_ctx) {
dev_crit(hdev->dev,
- "kernel ctx was alive during hard reset, something is terribly wrong\n");
+ "%s kernel ctx was alive during hard reset, something is terribly wrong\n",
+ dev_name(&(hdev)->pdev->dev));
rc = -EBUSY;
goto out_err;
}
@@ -1645,9 +1649,13 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
hdev->reset_info.needs_reset = false;
if (hard_reset)
- dev_info(hdev->dev, "Successfully finished resetting the device\n");
+ dev_info(hdev->dev,
+ "Successfully finished resetting the %s device\n",
+ dev_name(&(hdev)->pdev->dev));
else
- dev_dbg(hdev->dev, "Successfully finished resetting the device\n");
+ dev_dbg(hdev->dev,
+ "Successfully finished resetting the %s device\n",
+ dev_name(&(hdev)->pdev->dev));
if (hard_reset) {
hdev->reset_info.hard_reset_cnt++;
@@ -1681,7 +1689,9 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
hdev->reset_info.in_compute_reset = 0;
if (hard_reset) {
- dev_err(hdev->dev, "Failed to reset! Device is NOT usable\n");
+ dev_err(hdev->dev,
+ "%s Failed to reset! Device is NOT usable\n",
+ dev_name(&(hdev)->pdev->dev));
hdev->reset_info.hard_reset_cnt++;
} else if (reset_upon_device_release) {
spin_unlock(&hdev->reset_info.lock);
@@ -2004,7 +2014,8 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
}
dev_notice(hdev->dev,
- "Successfully added device to habanalabs driver\n");
+ "Successfully added device %s to habanalabs driver\n",
+ dev_name(&(hdev)->pdev->dev));
hdev->init_done = true;
@@ -2053,11 +2064,11 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
device_cdev_sysfs_add(hdev);
if (hdev->pdev)
dev_err(&hdev->pdev->dev,
- "Failed to initialize hl%d. Device is NOT usable !\n",
- hdev->cdev_idx);
+ "Failed to initialize hl%d. Device %s is NOT usable !\n",
+ hdev->cdev_idx, dev_name(&(hdev)->pdev->dev));
else
- pr_err("Failed to initialize hl%d. Device is NOT usable !\n",
- hdev->cdev_idx);
+ pr_err("Failed to initialize hl%d. Device %s is NOT usable !\n",
+ hdev->cdev_idx, dev_name(&(hdev)->pdev->dev));
return rc;
}
@@ -2113,7 +2124,8 @@ void hl_device_fini(struct hl_device *hdev)
if (ktime_compare(ktime_get(), timeout) > 0) {
dev_crit(hdev->dev,
- "Failed to remove device because reset function did not finish\n");
+ "%s Failed to remove device because reset function did not finish\n",
+ dev_name(&(hdev)->pdev->dev));
return;
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 619/885] habanalabs: fix bug in timestamps registration code
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (617 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 618/885] habanalabs: extend fatal messages to contain PCI info Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 620/885] docs/scripts/gdb: add necessary make scripts_gdb step Greg Kroah-Hartman
` (268 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, farah kassabri, Oded Gabbay, Sasha Levin
From: farah kassabri <fkassabri@habana.ai>
[ Upstream commit ac5af9900f82b7034de7c9eb1d70d030ba325607 ]
Protect re-using the same timestamp buffer record before actually
adding it to the to interrupt wait list.
Mark ts buff offset as in use in the spinlock protection area of the
interrupt wait list to avoid getting in the re-use section in
ts_buff_get_kernel_ts_record before adding the node to the list.
this scenario might happen when multiple threads are racing on
same offset and one thread could set data in the ts buff in
ts_buff_get_kernel_ts_record then the other thread takes over
and get to ts_buff_get_kernel_ts_record and we will try
to re-use the same ts buff offset then we will try to
delete a non existing node from the list.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../habanalabs/common/command_submission.c | 33 ++++++++++++-------
1 file changed, 22 insertions(+), 11 deletions(-)
diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c
index fa05770865c65..1071bf492e423 100644
--- a/drivers/misc/habanalabs/common/command_submission.c
+++ b/drivers/misc/habanalabs/common/command_submission.c
@@ -3091,19 +3091,18 @@ static int ts_buff_get_kernel_ts_record(struct hl_mmap_mem_buf *buf,
goto start_over;
}
} else {
+ /* Fill up the new registration node info */
+ requested_offset_record->ts_reg_info.buf = buf;
+ requested_offset_record->ts_reg_info.cq_cb = cq_cb;
+ requested_offset_record->ts_reg_info.timestamp_kernel_addr =
+ (u64 *) ts_buff->user_buff_address + ts_offset;
+ requested_offset_record->cq_kernel_addr =
+ (u64 *) cq_cb->kernel_address + cq_offset;
+ requested_offset_record->cq_target_value = target_value;
+
spin_unlock_irqrestore(wait_list_lock, flags);
}
- /* Fill up the new registration node info */
- requested_offset_record->ts_reg_info.in_use = 1;
- requested_offset_record->ts_reg_info.buf = buf;
- requested_offset_record->ts_reg_info.cq_cb = cq_cb;
- requested_offset_record->ts_reg_info.timestamp_kernel_addr =
- (u64 *) ts_buff->user_buff_address + ts_offset;
- requested_offset_record->cq_kernel_addr =
- (u64 *) cq_cb->kernel_address + cq_offset;
- requested_offset_record->cq_target_value = target_value;
-
*pend = requested_offset_record;
dev_dbg(buf->mmg->dev, "Found available node in TS kernel CB %p\n",
@@ -3151,7 +3150,7 @@ static int _hl_interrupt_wait_ioctl(struct hl_device *hdev, struct hl_ctx *ctx,
goto put_cq_cb;
}
- /* Find first available record */
+ /* get ts buffer record */
rc = ts_buff_get_kernel_ts_record(buf, cq_cb, ts_offset,
cq_counters_offset, target_value,
&interrupt->wait_list_lock, &pend);
@@ -3199,7 +3198,19 @@ static int _hl_interrupt_wait_ioctl(struct hl_device *hdev, struct hl_ctx *ctx,
* Note that we cannot have sorted list by target value,
* in order to shorten the list pass loop, since
* same list could have nodes for different cq counter handle.
+ * Note:
+ * Mark ts buff offset as in use here in the spinlock protection area
+ * to avoid getting in the re-use section in ts_buff_get_kernel_ts_record
+ * before adding the node to the list. this scenario might happen when
+ * multiple threads are racing on same offset and one thread could
+ * set the ts buff in ts_buff_get_kernel_ts_record then the other thread
+ * takes over and get to ts_buff_get_kernel_ts_record and then we will try
+ * to re-use the same ts buff offset, and will try to delete a non existing
+ * node from the list.
*/
+ if (register_ts_record)
+ pend->ts_reg_info.in_use = 1;
+
list_add_tail(&pend->wait_list_node, &interrupt->wait_list_head);
spin_unlock_irqrestore(&interrupt->wait_list_lock, flags);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 620/885] docs/scripts/gdb: add necessary make scripts_gdb step
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (618 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 619/885] habanalabs: fix bug in timestamps registration code Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 621/885] drm/msm/dpu: Add DSC hardware blocks to register snapshot Greg Kroah-Hartman
` (267 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jakob Koschel, Jonathan Corbet, Sasha Levin
From: Jakob Koschel <jkl820.git@gmail.com>
[ Upstream commit 6b219431037bf98c9efd49716aea9b68440477a3 ]
In order to debug the kernel successfully with gdb you need to run
'make scripts_gdb' nowadays.
This was changed with the following commit:
Commit 67274c083438340ad16c ("scripts/gdb: delay generation of gdb
constants.py")
In order to have a complete guide for beginners this remark
should be added to the offial documentation.
Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Link: https://lore.kernel.org/r/20230112-documentation-gdb-v2-1-292785c43dc9@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/dev-tools/gdb-kernel-debugging.rst | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/dev-tools/gdb-kernel-debugging.rst b/Documentation/dev-tools/gdb-kernel-debugging.rst
index 8e0f1fe8d17ad..895285c037c72 100644
--- a/Documentation/dev-tools/gdb-kernel-debugging.rst
+++ b/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -39,6 +39,10 @@ Setup
this mode. In this case, you should build the kernel with
CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR.
+- Build the gdb scripts (required on kernels v5.1 and above)::
+
+ make scripts_gdb
+
- Enable the gdb stub of QEMU/KVM, either
- at VM startup time by appending "-s" to the QEMU command line
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 621/885] drm/msm/dpu: Add DSC hardware blocks to register snapshot
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (619 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 620/885] docs/scripts/gdb: add necessary make scripts_gdb step Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 622/885] ASoC: soc-compress: Reposition and add pcm_mutex Greg Kroah-Hartman
` (266 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marijn Suijten, Neil Armstrong,
Abhinav Kumar, Dmitry Baryshkov, Sasha Levin
From: Marijn Suijten <marijn.suijten@somainline.org>
[ Upstream commit a7efe60e36b9c0e966d7f82ac90a89b591d984e9 ]
Add missing DSC hardware block register ranges to the snapshot utility
to include them in dmesg (on MSM_DISP_SNAPSHOT_DUMP_IN_CONSOLE) and the
kms debugfs file.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520175/
Link: https://lore.kernel.org/r/20230125101412.216924-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 5e6e2626151e8..b7901b666612a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -942,6 +942,11 @@ static void dpu_kms_mdp_snapshot(struct msm_disp_state *disp_state, struct msm_k
msm_disp_snapshot_add_block(disp_state, cat->mdp[0].len,
dpu_kms->mmio + cat->mdp[0].base, "top");
+ /* dump DSC sub-blocks HW regs info */
+ for (i = 0; i < cat->dsc_count; i++)
+ msm_disp_snapshot_add_block(disp_state, cat->dsc[i].len,
+ dpu_kms->mmio + cat->dsc[i].base, "dsc_%d", i);
+
pm_runtime_put_sync(&dpu_kms->pdev->dev);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 622/885] ASoC: soc-compress: Reposition and add pcm_mutex
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (620 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 621/885] drm/msm/dpu: Add DSC hardware blocks to register snapshot Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` Greg Kroah-Hartman
` (265 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shinhyung Kang, Mark Brown, Sasha Levin
From: 강신형 <s47.kang@samsung.com>
[ Upstream commit aa9ff6a4955fdba02b54fbc4386db876603703b7 ]
If panic_on_warn is set and compress stream(DPCM) is started,
then kernel panic occurred because card->pcm_mutex isn't held appropriately.
In the following functions, warning were issued at this line
"snd_soc_dpcm_mutex_assert_held".
static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe,
struct snd_soc_pcm_runtime *be, int stream)
{
...
snd_soc_dpcm_mutex_assert_held(fe);
...
}
void dpcm_be_disconnect(struct snd_soc_pcm_runtime *fe, int stream)
{
...
snd_soc_dpcm_mutex_assert_held(fe);
...
}
void snd_soc_runtime_action(struct snd_soc_pcm_runtime *rtd,
int stream, int action)
{
...
snd_soc_dpcm_mutex_assert_held(rtd);
...
}
int dpcm_dapm_stream_event(struct snd_soc_pcm_runtime *fe, int dir,
int event)
{
...
snd_soc_dpcm_mutex_assert_held(fe);
...
}
These functions are called by soc_compr_set_params_fe, soc_compr_open_fe
and soc_compr_free_fe
without pcm_mutex locking. And this is call stack.
[ 414.527841][ T2179] pc : dpcm_process_paths+0x5a4/0x750
[ 414.527848][ T2179] lr : dpcm_process_paths+0x37c/0x750
[ 414.527945][ T2179] Call trace:
[ 414.527949][ T2179] dpcm_process_paths+0x5a4/0x750
[ 414.527955][ T2179] soc_compr_open_fe+0xb0/0x2cc
[ 414.527972][ T2179] snd_compr_open+0x180/0x248
[ 414.527981][ T2179] snd_open+0x15c/0x194
[ 414.528003][ T2179] chrdev_open+0x1b0/0x220
[ 414.528023][ T2179] do_dentry_open+0x30c/0x594
[ 414.528045][ T2179] vfs_open+0x34/0x44
[ 414.528053][ T2179] path_openat+0x914/0xb08
[ 414.528062][ T2179] do_filp_open+0xc0/0x170
[ 414.528068][ T2179] do_sys_openat2+0x94/0x18c
[ 414.528076][ T2179] __arm64_sys_openat+0x78/0xa4
[ 414.528084][ T2179] invoke_syscall+0x48/0x10c
[ 414.528094][ T2179] el0_svc_common+0xbc/0x104
[ 414.528099][ T2179] do_el0_svc+0x34/0xd8
[ 414.528103][ T2179] el0_svc+0x34/0xc4
[ 414.528125][ T2179] el0t_64_sync_handler+0x8c/0xfc
[ 414.528133][ T2179] el0t_64_sync+0x1a0/0x1a4
[ 414.528142][ T2179] Kernel panic - not syncing: panic_on_warn set ...
So, I reposition and add pcm_mutex to resolve lockdep error.
Signed-off-by: Shinhyung Kang <s47.kang@samsung.com>
Link: https://lore.kernel.org/r/016401d90ac4$7b6848c0$7238da40$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/soc-compress.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c
index cb0ed2fea893a..e7aa6f360cabe 100644
--- a/sound/soc/soc-compress.c
+++ b/sound/soc/soc-compress.c
@@ -149,6 +149,8 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream)
if (ret < 0)
goto be_err;
+ mutex_lock_nested(&fe->card->pcm_mutex, fe->card->pcm_subclass);
+
/* calculate valid and active FE <-> BE dpcms */
dpcm_process_paths(fe, stream, &list, 1);
fe->dpcm[stream].runtime = fe_substream->runtime;
@@ -184,7 +186,6 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream)
fe->dpcm[stream].state = SND_SOC_DPCM_STATE_OPEN;
fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
- mutex_lock_nested(&fe->card->pcm_mutex, fe->card->pcm_subclass);
snd_soc_runtime_activate(fe, stream);
mutex_unlock(&fe->card->pcm_mutex);
@@ -215,7 +216,6 @@ static int soc_compr_free_fe(struct snd_compr_stream *cstream)
mutex_lock_nested(&fe->card->pcm_mutex, fe->card->pcm_subclass);
snd_soc_runtime_deactivate(fe, stream);
- mutex_unlock(&fe->card->pcm_mutex);
fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
@@ -234,6 +234,8 @@ static int soc_compr_free_fe(struct snd_compr_stream *cstream)
dpcm_be_disconnect(fe, stream);
+ mutex_unlock(&fe->card->pcm_mutex);
+
fe->dpcm[stream].runtime = NULL;
snd_soc_link_compr_shutdown(cstream, 0);
@@ -409,8 +411,9 @@ static int soc_compr_set_params_fe(struct snd_compr_stream *cstream,
ret = snd_soc_link_compr_set_params(cstream);
if (ret < 0)
goto out;
-
+ mutex_lock_nested(&fe->card->pcm_mutex, fe->card->pcm_subclass);
dpcm_dapm_stream_event(fe, stream, SND_SOC_DAPM_STREAM_START);
+ mutex_unlock(&fe->card->pcm_mutex);
fe->dpcm[stream].state = SND_SOC_DPCM_STATE_PREPARE;
out:
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 623/885] ASoC: kirkwood: Iterate over array indexes instead of using pointer math
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 002/885] HID: asus: use spinlock to safely schedule workers Greg Kroah-Hartman
` (886 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Liam Girdwood, Mark Brown,
Jaroslav Kysela, Takashi Iwai, alsa-devel, Kees Cook,
Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit b3bcedc0402fcdc5c8624c433562d9d1882749d8 ]
Walking the dram->cs array was seen as accesses beyond the first array
item by the compiler. Instead, use the array index directly. This allows
for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen
with GCC 13 with -fstrict-flex-arrays:
../sound/soc/kirkwood/kirkwood-dma.c: In function
'kirkwood_dma_conf_mbus_windows.constprop':
../sound/soc/kirkwood/kirkwood-dma.c:90:24: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=]
90 | if ((cs->base & 0xffff0000) < (dma & 0xffff0000)) {
| ~~^~~~~~
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230127224128.never.410-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/kirkwood/kirkwood-dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/kirkwood/kirkwood-dma.c b/sound/soc/kirkwood/kirkwood-dma.c
index 700a18561a940..640cebd2983e2 100644
--- a/sound/soc/kirkwood/kirkwood-dma.c
+++ b/sound/soc/kirkwood/kirkwood-dma.c
@@ -86,7 +86,7 @@ kirkwood_dma_conf_mbus_windows(void __iomem *base, int win,
/* try to find matching cs for current dma address */
for (i = 0; i < dram->num_cs; i++) {
- const struct mbus_dram_window *cs = dram->cs + i;
+ const struct mbus_dram_window *cs = &dram->cs[i];
if ((cs->base & 0xffff0000) < (dma & 0xffff0000)) {
writel(cs->base & 0xffff0000,
base + KIRKWOOD_AUDIO_WIN_BASE_REG(win));
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 623/885] ASoC: kirkwood: Iterate over array indexes instead of using pointer math
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
0 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Liam Girdwood, Mark Brown,
Takashi Iwai, alsa-devel, Kees Cook, Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit b3bcedc0402fcdc5c8624c433562d9d1882749d8 ]
Walking the dram->cs array was seen as accesses beyond the first array
item by the compiler. Instead, use the array index directly. This allows
for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen
with GCC 13 with -fstrict-flex-arrays:
../sound/soc/kirkwood/kirkwood-dma.c: In function
'kirkwood_dma_conf_mbus_windows.constprop':
../sound/soc/kirkwood/kirkwood-dma.c:90:24: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=]
90 | if ((cs->base & 0xffff0000) < (dma & 0xffff0000)) {
| ~~^~~~~~
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230127224128.never.410-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/kirkwood/kirkwood-dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/kirkwood/kirkwood-dma.c b/sound/soc/kirkwood/kirkwood-dma.c
index 700a18561a940..640cebd2983e2 100644
--- a/sound/soc/kirkwood/kirkwood-dma.c
+++ b/sound/soc/kirkwood/kirkwood-dma.c
@@ -86,7 +86,7 @@ kirkwood_dma_conf_mbus_windows(void __iomem *base, int win,
/* try to find matching cs for current dma address */
for (i = 0; i < dram->num_cs; i++) {
- const struct mbus_dram_window *cs = dram->cs + i;
+ const struct mbus_dram_window *cs = &dram->cs[i];
if ((cs->base & 0xffff0000) < (dma & 0xffff0000)) {
writel(cs->base & 0xffff0000,
base + KIRKWOOD_AUDIO_WIN_BASE_REG(win));
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 624/885] regulator: max77802: Bounds check regulator id against opmode
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (622 preceding siblings ...)
2023-03-07 16:59 ` Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 625/885] regulator: s5m8767: Bounds check id indexing into arrays Greg Kroah-Hartman
` (263 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Javier Martinez Canillas,
Liam Girdwood, Mark Brown, Kees Cook, Javier Martinez Canillas,
Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit 4fd8bcec5fd7c0d586206fa2f42bd67b06cdaa7e ]
Explicitly bounds-check the id before accessing the opmode array. Seen
with GCC 13:
../drivers/regulator/max77802-regulator.c: In function 'max77802_enable':
../drivers/regulator/max77802-regulator.c:217:29: warning: array subscript [0, 41] is outside array bounds of 'unsigned int[42]' [-Warray-bounds=]
217 | if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
| ~~~~~~~~~~~~~~~~^~~~
../drivers/regulator/max77802-regulator.c:62:22: note: while referencing 'opmode'
62 | unsigned int opmode[MAX77802_REG_MAX];
| ^~~~~~
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20230127225203.never.864-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/max77802-regulator.c | 34 ++++++++++++++++++--------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index 21e0eb0f43f94..befe5f319819b 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -94,9 +94,11 @@ static int max77802_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int val = MAX77802_OFF_PWRREQ;
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
max77802->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val << shift);
@@ -110,7 +112,7 @@ static int max77802_set_suspend_disable(struct regulator_dev *rdev)
static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
unsigned int val;
int shift = max77802_get_opmode_shift(id);
@@ -127,6 +129,9 @@ static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
return -EINVAL;
}
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
+
max77802->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val << shift);
@@ -135,8 +140,10 @@ static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
static unsigned max77802_get_mode(struct regulator_dev *rdev)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
return max77802_map_mode(max77802->opmode[id]);
}
@@ -160,10 +167,13 @@ static int max77802_set_suspend_mode(struct regulator_dev *rdev,
unsigned int mode)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
unsigned int val;
int shift = max77802_get_opmode_shift(id);
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
+
/*
* If the regulator has been disabled for suspend
* then is invalid to try setting a suspend mode.
@@ -209,9 +219,11 @@ static int max77802_set_suspend_mode(struct regulator_dev *rdev,
static int max77802_enable(struct regulator_dev *rdev)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
@@ -495,7 +507,7 @@ static int max77802_pmic_probe(struct platform_device *pdev)
for (i = 0; i < MAX77802_REG_MAX; i++) {
struct regulator_dev *rdev;
- int id = regulators[i].id;
+ unsigned int id = regulators[i].id;
int shift = max77802_get_opmode_shift(id);
int ret;
@@ -513,10 +525,12 @@ static int max77802_pmic_probe(struct platform_device *pdev)
* the hardware reports OFF as the regulator operating mode.
* Default to operating mode NORMAL in that case.
*/
- if (val == MAX77802_STATUS_OFF)
- max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
- else
- max77802->opmode[id] = val;
+ if (id < ARRAY_SIZE(max77802->opmode)) {
+ if (val == MAX77802_STATUS_OFF)
+ max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
+ else
+ max77802->opmode[id] = val;
+ }
rdev = devm_regulator_register(&pdev->dev,
®ulators[i], &config);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 625/885] regulator: s5m8767: Bounds check id indexing into arrays
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (623 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 624/885] regulator: max77802: Bounds check regulator id against opmode Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 626/885] Revert "drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is uninstalled" Greg Kroah-Hartman
` (262 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski, Liam Girdwood,
Mark Brown, linux-samsung-soc, Kees Cook, Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit e314e15a0b58f9d051c00b25951073bcdae61953 ]
The compiler has no way to know if "id" is within the array bounds of
the regulators array. Add a check for this and a build-time check that
the regulators and reg_voltage_map arrays are sized the same. Seen with
GCC 13:
../drivers/regulator/s5m8767.c: In function 's5m8767_pmic_probe':
../drivers/regulator/s5m8767.c:936:35: warning: array subscript [0, 36] is outside array bounds of 'struct regulator_desc[37]' [-Warray-bounds=]
936 | regulators[id].vsel_reg =
| ~~~~~~~~~~^~~~
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230128005358.never.313-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/s5m8767.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 35269f9982105..754c6fcc6e642 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -923,10 +923,14 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
for (i = 0; i < pdata->num_regulators; i++) {
const struct sec_voltage_desc *desc;
- int id = pdata->regulators[i].id;
+ unsigned int id = pdata->regulators[i].id;
int enable_reg, enable_val;
struct regulator_dev *rdev;
+ BUILD_BUG_ON(ARRAY_SIZE(regulators) != ARRAY_SIZE(reg_voltage_map));
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(regulators)))
+ continue;
+
desc = reg_voltage_map[id];
if (desc) {
regulators[id].n_voltages =
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 626/885] Revert "drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is uninstalled"
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (624 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 625/885] regulator: s5m8767: Bounds check id indexing into arrays Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 627/885] drm/amd/display: fix FCLK pstate change underflow Greg Kroah-Hartman
` (261 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vitaly Prosyak, Alex Deucher, Sasha Levin
From: Vitaly Prosyak <vitaly.prosyak@amd.com>
[ Upstream commit 39934d3ed5725c5e3570ed1b67f612f1ea60ce03 ]
This reverts commit fac53471d0ea9693d314aa2df08d62b2e7e3a0f8.
The following change: move the drm_dev_unplug call after
amdgpu_driver_unload_kms in amdgpu_pci_remove. The reason is
the following: amdgpu_pci_remove calls drm_dev_unregister
and it should be called first to ensure userspace can't access the
device instance anymore. If we call drm_dev_unplug after
amdgpu_driver_unload_kms then we observe IGT PCI software unplug
test failure (kernel hung) for all ASICs. This is how this
regression was found.
After this revert, the following commands do work not, but it would
be fixed in the next commit:
- sudo modprobe -r amdgpu
- sudo modprobe amdgpu
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 ++-
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 4 ++--
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index a21b3f66fd708..824b0b356b3ce 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -4012,7 +4012,8 @@ void amdgpu_device_fini_hw(struct amdgpu_device *adev)
amdgpu_gart_dummy_page_fini(adev);
- amdgpu_device_unmap_mmio(adev);
+ if (drm_dev_is_unplugged(adev_to_drm(adev)))
+ amdgpu_device_unmap_mmio(adev);
}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 2e5d78b6635c4..dfbeef2c4a9e2 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -2226,6 +2226,8 @@ amdgpu_pci_remove(struct pci_dev *pdev)
struct drm_device *dev = pci_get_drvdata(pdev);
struct amdgpu_device *adev = drm_to_adev(dev);
+ drm_dev_unplug(dev);
+
if (adev->pm.rpm_mode != AMDGPU_RUNPM_NONE) {
pm_runtime_get_sync(dev->dev);
pm_runtime_forbid(dev->dev);
@@ -2265,8 +2267,6 @@ amdgpu_pci_remove(struct pci_dev *pdev)
amdgpu_driver_unload_kms(dev);
- drm_dev_unplug(dev);
-
/*
* Flush any in flight DMA operations from device.
* Clear the Bus Master Enable bit and then wait on the PCIe Device
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 627/885] drm/amd/display: fix FCLK pstate change underflow
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (625 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 626/885] Revert "drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is uninstalled" Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 628/885] gfs2: Improve gfs2_make_fs_rw error handling Greg Kroah-Hartman
` (260 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nevenko Stupar, Alex Hung,
Vladimir Stempen, Daniel Wheeler, Alex Deucher, Sasha Levin
From: Vladimir Stempen <vladimir.stempen@amd.com>
[ Upstream commit 972243f973eb0821084e5833d5f7f4ed025f42da ]
[Why]
Currently we set FCLK p-state change
watermark calculated based on dummy
p-state latency when UCLK p-state is
not supported
[How]
Calculate FCLK p-state change watermark
based on on FCLK pstate change latency
in case UCLK p-state is not supported
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index d90216d2fe3a8..04cc96e700981 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -1963,6 +1963,10 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context,
*/
context->bw_ctx.bw.dcn.watermarks.a = context->bw_ctx.bw.dcn.watermarks.c;
context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.pstate_change_ns = 0;
+ /* Calculate FCLK p-state change watermark based on FCLK pstate change latency in case
+ * UCLK p-state is not supported, to avoid underflow in case FCLK pstate is supported
+ */
+ context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.fclk_pstate_change_ns = get_fclk_watermark(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
} else {
/* Set A:
* All clocks min.
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 628/885] gfs2: Improve gfs2_make_fs_rw error handling
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (626 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 627/885] drm/amd/display: fix FCLK pstate change underflow Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 629/885] hwmon: (coretemp) Simplify platform device handling Greg Kroah-Hartman
` (259 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tetsuo Handa,
syzbot+f51cb4b9afbd87ec06f2, Andreas Gruenbacher, Sasha Levin
From: Andreas Gruenbacher <agruenba@redhat.com>
[ Upstream commit b66f723bb552ad59c2acb5d45ea45c890f84498b ]
In gfs2_make_fs_rw(), make sure to call gfs2_consist() to report an
inconsistency and mark the filesystem as withdrawn when
gfs2_find_jhead() fails.
At the end of gfs2_make_fs_rw(), when we discover that the filesystem
has been withdrawn, make sure we report an error. This also replaces
the gfs2_withdrawn() check after gfs2_find_jhead().
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: syzbot+f51cb4b9afbd87ec06f2@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/gfs2/super.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 011f9e7660ef8..2015bd05cba10 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -138,8 +138,10 @@ int gfs2_make_fs_rw(struct gfs2_sbd *sdp)
return -EIO;
error = gfs2_find_jhead(sdp->sd_jdesc, &head, false);
- if (error || gfs2_withdrawn(sdp))
+ if (error) {
+ gfs2_consist(sdp);
return error;
+ }
if (!(head.lh_flags & GFS2_LOG_HEAD_UNMOUNT)) {
gfs2_consist(sdp);
@@ -151,7 +153,9 @@ int gfs2_make_fs_rw(struct gfs2_sbd *sdp)
gfs2_log_pointers_init(sdp, head.lh_blkno);
error = gfs2_quota_init(sdp);
- if (!error && !gfs2_withdrawn(sdp))
+ if (!error && gfs2_withdrawn(sdp))
+ error = -EIO;
+ if (!error)
set_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags);
return error;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 629/885] hwmon: (coretemp) Simplify platform device handling
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (627 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 628/885] gfs2: Improve gfs2_make_fs_rw error handling Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 630/885] hwmon: (nct6775) Directly call ASUS ACPI WMI method Greg Kroah-Hartman
` (258 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Robin Murphy, Janusz Krzysztofik,
Guenter Roeck, Sasha Levin
From: Robin Murphy <robin.murphy@arm.com>
[ Upstream commit 6d03bbff456befeccdd4d663177c4d6c75d0c4ff ]
Coretemp's platform driver is unconventional. All the real work is done
globally by the initcall and CPU hotplug notifiers, while the "driver"
effectively just wraps an allocation and the registration of the hwmon
interface in a long-winded round-trip through the driver core. The whole
logic of dynamically creating and destroying platform devices to bring
the interfaces up and down is error prone, since it assumes
platform_device_add() will synchronously bind the driver and set drvdata
before it returns, thus results in a NULL dereference if drivers_autoprobe
is turned off for the platform bus. Furthermore, the unusual approach of
doing that from within a CPU hotplug notifier, already commented in the
code that it deadlocks suspend, also causes lockdep issues for other
drivers or subsystems which may want to legitimately register a CPU
hotplug notifier from a platform bus notifier.
All of these issues can be solved by ripping this unusual behaviour out
completely, simply tying the platform devices to the lifetime of the
module itself, and directly managing the hwmon interfaces from the
hotplug notifiers. There is a slight user-visible change in that
/sys/bus/platform/drivers/coretemp will no longer appear, and
/sys/devices/platform/coretemp.n will remain present if package n is
hotplugged off, but hwmon users should really only be looking for the
presence of the hwmon interfaces, whose behaviour remains unchanged.
Link: https://lore.kernel.org/lkml/20220922101036.87457-1-janusz.krzysztofik@linux.intel.com/
Link: https://gitlab.freedesktop.org/drm/intel/issues/6641
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://lore.kernel.org/r/20230103114620.15319-1-janusz.krzysztofik@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/coretemp.c | 128 ++++++++++++++++++---------------------
1 file changed, 58 insertions(+), 70 deletions(-)
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 9bee4d33fbdf0..baaf8af4cb443 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -550,66 +550,49 @@ static void coretemp_remove_core(struct platform_data *pdata, int indx)
ida_free(&pdata->ida, indx - BASE_SYSFS_ATTR_NO);
}
-static int coretemp_probe(struct platform_device *pdev)
+static int coretemp_device_add(int zoneid)
{
- struct device *dev = &pdev->dev;
+ struct platform_device *pdev;
struct platform_data *pdata;
+ int err;
/* Initialize the per-zone data structures */
- pdata = devm_kzalloc(dev, sizeof(struct platform_data), GFP_KERNEL);
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
- pdata->pkg_id = pdev->id;
+ pdata->pkg_id = zoneid;
ida_init(&pdata->ida);
- platform_set_drvdata(pdev, pdata);
- pdata->hwmon_dev = devm_hwmon_device_register_with_groups(dev, DRVNAME,
- pdata, NULL);
- return PTR_ERR_OR_ZERO(pdata->hwmon_dev);
-}
-
-static int coretemp_remove(struct platform_device *pdev)
-{
- struct platform_data *pdata = platform_get_drvdata(pdev);
- int i;
+ pdev = platform_device_alloc(DRVNAME, zoneid);
+ if (!pdev) {
+ err = -ENOMEM;
+ goto err_free_pdata;
+ }
- for (i = MAX_CORE_DATA - 1; i >= 0; --i)
- if (pdata->core_data[i])
- coretemp_remove_core(pdata, i);
+ err = platform_device_add(pdev);
+ if (err)
+ goto err_put_dev;
- ida_destroy(&pdata->ida);
+ platform_set_drvdata(pdev, pdata);
+ zone_devices[zoneid] = pdev;
return 0;
-}
-static struct platform_driver coretemp_driver = {
- .driver = {
- .name = DRVNAME,
- },
- .probe = coretemp_probe,
- .remove = coretemp_remove,
-};
+err_put_dev:
+ platform_device_put(pdev);
+err_free_pdata:
+ kfree(pdata);
+ return err;
+}
-static struct platform_device *coretemp_device_add(unsigned int cpu)
+static void coretemp_device_remove(int zoneid)
{
- int err, zoneid = topology_logical_die_id(cpu);
- struct platform_device *pdev;
-
- if (zoneid < 0)
- return ERR_PTR(-ENOMEM);
-
- pdev = platform_device_alloc(DRVNAME, zoneid);
- if (!pdev)
- return ERR_PTR(-ENOMEM);
-
- err = platform_device_add(pdev);
- if (err) {
- platform_device_put(pdev);
- return ERR_PTR(err);
- }
+ struct platform_device *pdev = zone_devices[zoneid];
+ struct platform_data *pdata = platform_get_drvdata(pdev);
- zone_devices[zoneid] = pdev;
- return pdev;
+ ida_destroy(&pdata->ida);
+ kfree(pdata);
+ platform_device_unregister(pdev);
}
static int coretemp_cpu_online(unsigned int cpu)
@@ -633,7 +616,10 @@ static int coretemp_cpu_online(unsigned int cpu)
if (!cpu_has(c, X86_FEATURE_DTHERM))
return -ENODEV;
- if (!pdev) {
+ pdata = platform_get_drvdata(pdev);
+ if (!pdata->hwmon_dev) {
+ struct device *hwmon;
+
/* Check the microcode version of the CPU */
if (chk_ucode_version(cpu))
return -EINVAL;
@@ -644,9 +630,11 @@ static int coretemp_cpu_online(unsigned int cpu)
* online. So, initialize per-pkg data structures and
* then bring this core online.
*/
- pdev = coretemp_device_add(cpu);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
+ hwmon = hwmon_device_register_with_groups(&pdev->dev, DRVNAME,
+ pdata, NULL);
+ if (IS_ERR(hwmon))
+ return PTR_ERR(hwmon);
+ pdata->hwmon_dev = hwmon;
/*
* Check whether pkgtemp support is available.
@@ -656,7 +644,6 @@ static int coretemp_cpu_online(unsigned int cpu)
coretemp_add_core(pdev, cpu, 1);
}
- pdata = platform_get_drvdata(pdev);
/*
* Check whether a thread sibling is already online. If not add the
* interface for this CPU core.
@@ -675,18 +662,14 @@ static int coretemp_cpu_offline(unsigned int cpu)
struct temp_data *tdata;
int i, indx = -1, target;
- /*
- * Don't execute this on suspend as the device remove locks
- * up the machine.
- */
+ /* No need to tear down any interfaces for suspend */
if (cpuhp_tasks_frozen)
return 0;
/* If the physical CPU device does not exist, just return */
- if (!pdev)
- return 0;
-
pd = platform_get_drvdata(pdev);
+ if (!pd->hwmon_dev)
+ return 0;
for (i = 0; i < NUM_REAL_CORES; i++) {
if (pd->cpu_map[i] == topology_core_id(cpu)) {
@@ -718,13 +701,14 @@ static int coretemp_cpu_offline(unsigned int cpu)
}
/*
- * If all cores in this pkg are offline, remove the device. This
- * will invoke the platform driver remove function, which cleans up
- * the rest.
+ * If all cores in this pkg are offline, remove the interface.
*/
+ tdata = pd->core_data[PKG_SYSFS_ATTR_NO];
if (cpumask_empty(&pd->cpumask)) {
- zone_devices[topology_logical_die_id(cpu)] = NULL;
- platform_device_unregister(pdev);
+ if (tdata)
+ coretemp_remove_core(pd, PKG_SYSFS_ATTR_NO);
+ hwmon_device_unregister(pd->hwmon_dev);
+ pd->hwmon_dev = NULL;
return 0;
}
@@ -732,7 +716,6 @@ static int coretemp_cpu_offline(unsigned int cpu)
* Check whether this core is the target for the package
* interface. We need to assign it to some other cpu.
*/
- tdata = pd->core_data[PKG_SYSFS_ATTR_NO];
if (tdata && tdata->cpu == cpu) {
target = cpumask_first(&pd->cpumask);
mutex_lock(&tdata->update_lock);
@@ -751,7 +734,7 @@ static enum cpuhp_state coretemp_hp_online;
static int __init coretemp_init(void)
{
- int err;
+ int i, err;
/*
* CPUID.06H.EAX[0] indicates whether the CPU has thermal
@@ -767,20 +750,22 @@ static int __init coretemp_init(void)
if (!zone_devices)
return -ENOMEM;
- err = platform_driver_register(&coretemp_driver);
- if (err)
- goto outzone;
+ for (i = 0; i < max_zones; i++) {
+ err = coretemp_device_add(i);
+ if (err)
+ goto outzone;
+ }
err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "hwmon/coretemp:online",
coretemp_cpu_online, coretemp_cpu_offline);
if (err < 0)
- goto outdrv;
+ goto outzone;
coretemp_hp_online = err;
return 0;
-outdrv:
- platform_driver_unregister(&coretemp_driver);
outzone:
+ while (i--)
+ coretemp_device_remove(i);
kfree(zone_devices);
return err;
}
@@ -788,8 +773,11 @@ module_init(coretemp_init)
static void __exit coretemp_exit(void)
{
+ int i;
+
cpuhp_remove_state(coretemp_hp_online);
- platform_driver_unregister(&coretemp_driver);
+ for (i = 0; i < max_zones; i++)
+ coretemp_device_remove(i);
kfree(zone_devices);
}
module_exit(coretemp_exit)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 630/885] hwmon: (nct6775) Directly call ASUS ACPI WMI method
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (628 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 629/885] hwmon: (coretemp) Simplify platform device handling Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 631/885] hwmon: (nct6775) B650/B660/X670 ASUS boards support Greg Kroah-Hartman
` (257 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Denis Pauk, Ahmad Khalifa,
Guenter Roeck, Sasha Levin
From: Denis Pauk <pauk.denis@gmail.com>
[ Upstream commit c3b3747d02f571da2543e719066a50dd966989d8 ]
New ASUS B650/B660/X670 boards firmware have not exposed WMI monitoring
GUID and entrypoint method WMBD could be implemented for different device
UID.
Implement the direct call to entrypoint method for monitoring the device
UID of B550/X570 boards.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Co-developed-by: Ahmad Khalifa <ahmad@khalifa.ws>
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230111212241.7456-1-pauk.denis@gmail.com
[groeck: Fix multi-line formatting]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/Kconfig | 2 +-
drivers/hwmon/nct6775-platform.c | 98 ++++++++++++++++++++++----------
2 files changed, 70 insertions(+), 30 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index d3bccc8176c51..a5143d01b95f8 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1508,7 +1508,7 @@ config SENSORS_NCT6775_CORE
config SENSORS_NCT6775
tristate "Platform driver for Nuvoton NCT6775F and compatibles"
depends on !PPC
- depends on ACPI_WMI || ACPI_WMI=n
+ depends on ACPI || ACPI=n
select HWMON_VID
select SENSORS_NCT6775_CORE
help
diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c
index bf43f73dc835f..e5d4a79cd5f7d 100644
--- a/drivers/hwmon/nct6775-platform.c
+++ b/drivers/hwmon/nct6775-platform.c
@@ -17,7 +17,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
-#include <linux/wmi.h>
#include "nct6775.h"
@@ -107,40 +106,50 @@ struct nct6775_sio_data {
void (*sio_exit)(struct nct6775_sio_data *sio_data);
};
-#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66"
+#define ASUSWMI_METHOD "WMBD"
#define ASUSWMI_METHODID_RSIO 0x5253494F
#define ASUSWMI_METHODID_WSIO 0x5753494F
#define ASUSWMI_METHODID_RHWM 0x5248574D
#define ASUSWMI_METHODID_WHWM 0x5748574D
#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE
+#define ASUSWMI_DEVICE_HID "PNP0C14"
+#define ASUSWMI_DEVICE_UID "ASUSWMI"
+
+#if IS_ENABLED(CONFIG_ACPI)
+/*
+ * ASUS boards have only one device with WMI "WMBD" method and have provided
+ * access to only one SuperIO chip at 0x0290.
+ */
+static struct acpi_device *asus_acpi_dev;
+#endif
static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval)
{
-#if IS_ENABLED(CONFIG_ACPI_WMI)
+#if IS_ENABLED(CONFIG_ACPI)
+ acpi_handle handle = acpi_device_handle(asus_acpi_dev);
u32 args = bank | (reg << 8) | (val << 16);
- struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
- struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_object_list input;
+ union acpi_object params[3];
+ unsigned long long result;
acpi_status status;
- union acpi_object *obj;
- u32 tmp = ASUSWMI_UNSUPPORTED_METHOD;
-
- status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0,
- method_id, &input, &output);
+ params[0].type = ACPI_TYPE_INTEGER;
+ params[0].integer.value = 0;
+ params[1].type = ACPI_TYPE_INTEGER;
+ params[1].integer.value = method_id;
+ params[2].type = ACPI_TYPE_BUFFER;
+ params[2].buffer.length = sizeof(args);
+ params[2].buffer.pointer = (void *)&args;
+ input.count = 3;
+ input.pointer = params;
+
+ status = acpi_evaluate_integer(handle, ASUSWMI_METHOD, &input, &result);
if (ACPI_FAILURE(status))
return -EIO;
- obj = output.pointer;
- if (obj && obj->type == ACPI_TYPE_INTEGER)
- tmp = obj->integer.value;
-
if (retval)
- *retval = tmp;
+ *retval = (u32)result & 0xFFFFFFFF;
- kfree(obj);
-
- if (tmp == ASUSWMI_UNSUPPORTED_METHOD)
- return -ENODEV;
return 0;
#else
return -EOPNOTSUPP;
@@ -1099,6 +1108,45 @@ static const char * const asus_wmi_boards[] = {
"TUF GAMING Z490-PLUS (WI-FI)",
};
+#if IS_ENABLED(CONFIG_ACPI)
+/*
+ * Callback for acpi_bus_for_each_dev() to find the right device
+ * by _UID and _HID and return 1 to stop iteration.
+ */
+static int nct6775_asuswmi_device_match(struct device *dev, void *data)
+{
+ struct acpi_device *adev = to_acpi_device(dev);
+ const char *uid = acpi_device_uid(adev);
+ const char *hid = acpi_device_hid(adev);
+
+ if (hid && !strcmp(hid, ASUSWMI_DEVICE_HID) && uid && !strcmp(uid, data)) {
+ asus_acpi_dev = adev;
+ return 1;
+ }
+
+ return 0;
+}
+#endif
+
+static enum sensor_access nct6775_determine_access(const char *device_uid)
+{
+#if IS_ENABLED(CONFIG_ACPI)
+ u8 tmp;
+
+ acpi_bus_for_each_dev(nct6775_asuswmi_device_match, (void *)device_uid);
+ if (!asus_acpi_dev)
+ return access_direct;
+
+ /* if reading chip id via ACPI succeeds, use WMI "WMBD" method for access */
+ if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) {
+ pr_debug("Using Asus WMBD method of %s to access %#x chip.\n", device_uid, tmp);
+ return access_asuswmi;
+ }
+#endif
+
+ return access_direct;
+}
+
static int __init sensors_nct6775_platform_init(void)
{
int i, err;
@@ -1109,7 +1157,6 @@ static int __init sensors_nct6775_platform_init(void)
int sioaddr[2] = { 0x2e, 0x4e };
enum sensor_access access = access_direct;
const char *board_vendor, *board_name;
- u8 tmp;
err = platform_driver_register(&nct6775_driver);
if (err)
@@ -1122,15 +1169,8 @@ static int __init sensors_nct6775_platform_init(void)
!strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) {
err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards),
board_name);
- if (err >= 0) {
- /* if reading chip id via WMI succeeds, use WMI */
- if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) {
- pr_info("Using Asus WMI to access %#x chip.\n", tmp);
- access = access_asuswmi;
- } else {
- pr_err("Can't read ChipID by Asus WMI.\n");
- }
- }
+ if (err >= 0)
+ access = nct6775_determine_access(ASUSWMI_DEVICE_UID);
}
/*
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 631/885] hwmon: (nct6775) B650/B660/X670 ASUS boards support
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (629 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 630/885] hwmon: (nct6775) Directly call ASUS ACPI WMI method Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 632/885] pinctrl: at91: use devm_kasprintf() to avoid potential leaks Greg Kroah-Hartman
` (256 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Denis Pauk, Ahmad Khalifa,
Jeroen Beerstra, Slawomir Stepien, Guenter Roeck, Sasha Levin
From: Denis Pauk <pauk.denis@gmail.com>
[ Upstream commit e2e09989ccc21ad428d6393450add78584b143bd ]
Boards such as:
"EX-B660M-V5 PRO D4",
"PRIME B650-PLUS",
"PRIME B650M-A",
"PRIME B650M-A AX",
"PRIME B650M-A II",
"PRIME B650M-A WIFI",
"PRIME B650M-A WIFI II",
"PRIME B660M-A D4",
"PRIME B660M-A WIFI D4",
"PRIME X670-P",
"PRIME X670-P WIFI",
"PRIME X670E-PRO WIFI",
"Pro B660M-C-D4",
"ProArt B660-CREATOR D4",
"ProArt X670E-CREATOR WIFI",
"ROG CROSSHAIR X670E EXTREME",
"ROG CROSSHAIR X670E GENE",
"ROG CROSSHAIR X670E HERO",
"ROG MAXIMUS XIII EXTREME GLACIAL",
"ROG MAXIMUS Z690 EXTREME",
"ROG MAXIMUS Z690 EXTREME GLACIAL",
"ROG STRIX B650-A GAMING WIFI",
"ROG STRIX B650E-E GAMING WIFI",
"ROG STRIX B650E-F GAMING WIFI",
"ROG STRIX B650E-I GAMING WIFI",
"ROG STRIX B660-A GAMING WIFI D4",
"ROG STRIX B660-F GAMING WIFI",
"ROG STRIX B660-G GAMING WIFI",
"ROG STRIX B660-I GAMING WIFI",
"ROG STRIX X670E-A GAMING WIFI",
"ROG STRIX X670E-E GAMING WIFI",
"ROG STRIX X670E-F GAMING WIFI",
"ROG STRIX X670E-I GAMING WIFI",
"ROG STRIX Z590-A GAMING WIFI II",
"ROG STRIX Z690-A GAMING WIFI D4",
"TUF GAMING B650-PLUS",
"TUF GAMING B650-PLUS WIFI",
"TUF GAMING B650M-PLUS",
"TUF GAMING B650M-PLUS WIFI",
"TUF GAMING B660M-PLUS WIFI",
"TUF GAMING X670E-PLUS",
"TUF GAMING X670E-PLUS WIFI",
"TUF GAMING Z590-PLUS WIFI",
have got a NCT6799D chip, but by default there's no use of it
because of resource conflict with WMI method.
This commit adds such boards to the monitoring list with new ACPI device
UID.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Co-developed-by: Ahmad Khalifa <ahmad@khalifa.ws>
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Tested-by: Jeroen Beerstra <jeroen@beerstra.org>
Tested-by: Slawomir Stepien <sst@poczta.fm>
Link: https://lore.kernel.org/r/20230111212241.7456-2-pauk.denis@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/nct6775-platform.c | 52 ++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c
index e5d4a79cd5f7d..76c6b564d7fc4 100644
--- a/drivers/hwmon/nct6775-platform.c
+++ b/drivers/hwmon/nct6775-platform.c
@@ -114,6 +114,7 @@ struct nct6775_sio_data {
#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE
#define ASUSWMI_DEVICE_HID "PNP0C14"
#define ASUSWMI_DEVICE_UID "ASUSWMI"
+#define ASUSMSI_DEVICE_UID "AsusMbSwInterface"
#if IS_ENABLED(CONFIG_ACPI)
/*
@@ -1108,6 +1109,52 @@ static const char * const asus_wmi_boards[] = {
"TUF GAMING Z490-PLUS (WI-FI)",
};
+static const char * const asus_msi_boards[] = {
+ "EX-B660M-V5 PRO D4",
+ "PRIME B650-PLUS",
+ "PRIME B650M-A",
+ "PRIME B650M-A AX",
+ "PRIME B650M-A II",
+ "PRIME B650M-A WIFI",
+ "PRIME B650M-A WIFI II",
+ "PRIME B660M-A D4",
+ "PRIME B660M-A WIFI D4",
+ "PRIME X670-P",
+ "PRIME X670-P WIFI",
+ "PRIME X670E-PRO WIFI",
+ "Pro B660M-C-D4",
+ "ProArt B660-CREATOR D4",
+ "ProArt X670E-CREATOR WIFI",
+ "ROG CROSSHAIR X670E EXTREME",
+ "ROG CROSSHAIR X670E GENE",
+ "ROG CROSSHAIR X670E HERO",
+ "ROG MAXIMUS XIII EXTREME GLACIAL",
+ "ROG MAXIMUS Z690 EXTREME",
+ "ROG MAXIMUS Z690 EXTREME GLACIAL",
+ "ROG STRIX B650-A GAMING WIFI",
+ "ROG STRIX B650E-E GAMING WIFI",
+ "ROG STRIX B650E-F GAMING WIFI",
+ "ROG STRIX B650E-I GAMING WIFI",
+ "ROG STRIX B660-A GAMING WIFI D4",
+ "ROG STRIX B660-F GAMING WIFI",
+ "ROG STRIX B660-G GAMING WIFI",
+ "ROG STRIX B660-I GAMING WIFI",
+ "ROG STRIX X670E-A GAMING WIFI",
+ "ROG STRIX X670E-E GAMING WIFI",
+ "ROG STRIX X670E-F GAMING WIFI",
+ "ROG STRIX X670E-I GAMING WIFI",
+ "ROG STRIX Z590-A GAMING WIFI II",
+ "ROG STRIX Z690-A GAMING WIFI D4",
+ "TUF GAMING B650-PLUS",
+ "TUF GAMING B650-PLUS WIFI",
+ "TUF GAMING B650M-PLUS",
+ "TUF GAMING B650M-PLUS WIFI",
+ "TUF GAMING B660M-PLUS WIFI",
+ "TUF GAMING X670E-PLUS",
+ "TUF GAMING X670E-PLUS WIFI",
+ "TUF GAMING Z590-PLUS WIFI",
+};
+
#if IS_ENABLED(CONFIG_ACPI)
/*
* Callback for acpi_bus_for_each_dev() to find the right device
@@ -1171,6 +1218,11 @@ static int __init sensors_nct6775_platform_init(void)
board_name);
if (err >= 0)
access = nct6775_determine_access(ASUSWMI_DEVICE_UID);
+
+ err = match_string(asus_msi_boards, ARRAY_SIZE(asus_msi_boards),
+ board_name);
+ if (err >= 0)
+ access = nct6775_determine_access(ASUSMSI_DEVICE_UID);
}
/*
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 632/885] pinctrl: at91: use devm_kasprintf() to avoid potential leaks
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (630 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 631/885] hwmon: (nct6775) B650/B660/X670 ASUS boards support Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 633/885] drm/amd/display: Do not commit pipe when updating DRR Greg Kroah-Hartman
` (255 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Claudiu Beznea, Linus Walleij, Sasha Levin
From: Claudiu Beznea <claudiu.beznea@microchip.com>
[ Upstream commit 1c4e5c470a56f7f7c649c0c70e603abc1eab15c4 ]
Use devm_kasprintf() instead of kasprintf() to avoid any potential
leaks. At the moment drivers have no remove functionality thus
there is no need for fixes tag.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203132714.1931596-1-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/pinctrl-at91-pio4.c | 4 ++--
drivers/pinctrl/pinctrl-at91.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index 82b921fd630d5..7f193f2b1566a 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -1120,8 +1120,8 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
pin_desc[i].number = i;
/* Pin naming convention: P(bank_name)(bank_pin_number). */
- pin_desc[i].name = kasprintf(GFP_KERNEL, "P%c%d",
- bank + 'A', line);
+ pin_desc[i].name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "P%c%d",
+ bank + 'A', line);
group->name = group_names[i] = pin_desc[i].name;
group->pin = pin_desc[i].number;
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 81dbffab621fb..ff3b6a8a0b170 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1883,7 +1883,7 @@ static int at91_gpio_probe(struct platform_device *pdev)
}
for (i = 0; i < chip->ngpio; i++)
- names[i] = kasprintf(GFP_KERNEL, "pio%c%d", alias_idx + 'A', i);
+ names[i] = devm_kasprintf(&pdev->dev, GFP_KERNEL, "pio%c%d", alias_idx + 'A', i);
chip->names = (const char *const *)names;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 633/885] drm/amd/display: Do not commit pipe when updating DRR
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (631 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 632/885] pinctrl: at91: use devm_kasprintf() to avoid potential leaks Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 634/885] scsi: snic: Fix memory leak with using debugfs_lookup() Greg Kroah-Hartman
` (254 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jun Lei, Qingqing Zhuo,
Wesley Chalmers, Alex Deucher, Sasha Levin
From: Wesley Chalmers <Wesley.Chalmers@amd.com>
[ Upstream commit 8f0d304d21b351d65e8c434c5399a40231876ba1 ]
[WHY]
DRR and Pipe cannot be updated on
the same frame, or else underflow will
occur.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 15 +++++++++++++++
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h | 3 ++-
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c | 9 +++++++++
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h | 2 ++
.../drm/amd/display/dc/inc/hw/timing_generator.h | 1 +
5 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 24015f8cac75a..af7aefe285ffd 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -3222,6 +3222,21 @@ static void commit_planes_for_stream(struct dc *dc,
dc_z10_restore(dc);
+ if (update_type == UPDATE_TYPE_FULL) {
+ /* wait for all double-buffer activity to clear on all pipes */
+ int pipe_idx;
+
+ for (pipe_idx = 0; pipe_idx < dc->res_pool->pipe_count; pipe_idx++) {
+ struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[pipe_idx];
+
+ if (!pipe_ctx->stream)
+ continue;
+
+ if (pipe_ctx->stream_res.tg->funcs->wait_drr_doublebuffer_pending_clear)
+ pipe_ctx->stream_res.tg->funcs->wait_drr_doublebuffer_pending_clear(pipe_ctx->stream_res.tg);
+ }
+ }
+
if (get_seamless_boot_stream_count(context) > 0 && surface_count > 0) {
/* Optimize seamless boot flag keeps clocks and watermarks high until
* first flip. After first flip, optimization is required to lower
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h
index 88ac5f6f4c96c..0b37bb0e184b2 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h
@@ -519,7 +519,8 @@ struct dcn_optc_registers {
type OTG_CRC_DATA_STREAM_COMBINE_MODE;\
type OTG_CRC_DATA_STREAM_SPLIT_MODE;\
type OTG_CRC_DATA_FORMAT;\
- type OTG_V_TOTAL_LAST_USED_BY_DRR;
+ type OTG_V_TOTAL_LAST_USED_BY_DRR;\
+ type OTG_DRR_TIMING_DBUF_UPDATE_PENDING;
#define TG_REG_FIELD_LIST_DCN3_2(type) \
type OTG_H_TIMING_DIV_MODE_MANUAL;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
index 892d3c4d01a1e..25749f7d88366 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
@@ -282,6 +282,14 @@ static void optc3_set_timing_double_buffer(struct timing_generator *optc, bool e
OTG_DRR_TIMING_DBUF_UPDATE_MODE, mode);
}
+void optc3_wait_drr_doublebuffer_pending_clear(struct timing_generator *optc)
+{
+ struct optc *optc1 = DCN10TG_FROM_TG(optc);
+
+ REG_WAIT(OTG_DOUBLE_BUFFER_CONTROL, OTG_DRR_TIMING_DBUF_UPDATE_PENDING, 0, 2, 100000); /* 1 vupdate at 5hz */
+
+}
+
void optc3_set_vtotal_min_max(struct timing_generator *optc, int vtotal_min, int vtotal_max)
{
optc1_set_vtotal_min_max(optc, vtotal_min, vtotal_max);
@@ -351,6 +359,7 @@ static struct timing_generator_funcs dcn30_tg_funcs = {
.program_manual_trigger = optc2_program_manual_trigger,
.setup_manual_trigger = optc2_setup_manual_trigger,
.get_hw_timing = optc1_get_hw_timing,
+ .wait_drr_doublebuffer_pending_clear = optc3_wait_drr_doublebuffer_pending_clear,
};
void dcn30_timing_generator_init(struct optc *optc1)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h
index dd45a5499b078..fb06dc9a48937 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h
@@ -279,6 +279,7 @@
SF(OTG0_OTG_DRR_TRIGGER_WINDOW, OTG_DRR_TRIGGER_WINDOW_END_X, mask_sh),\
SF(OTG0_OTG_DRR_V_TOTAL_CHANGE, OTG_DRR_V_TOTAL_CHANGE_LIMIT, mask_sh),\
SF(OTG0_OTG_H_TIMING_CNTL, OTG_H_TIMING_DIV_BY2, mask_sh),\
+ SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_DRR_TIMING_DBUF_UPDATE_PENDING, mask_sh),\
SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_DRR_TIMING_DBUF_UPDATE_MODE, mask_sh),\
SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_BLANK_DATA_DOUBLE_BUFFER_EN, mask_sh)
@@ -317,6 +318,7 @@
SF(OTG0_OTG_DRR_TRIGGER_WINDOW, OTG_DRR_TRIGGER_WINDOW_END_X, mask_sh),\
SF(OTG0_OTG_DRR_V_TOTAL_CHANGE, OTG_DRR_V_TOTAL_CHANGE_LIMIT, mask_sh),\
SF(OTG0_OTG_H_TIMING_CNTL, OTG_H_TIMING_DIV_MODE, mask_sh),\
+ SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_DRR_TIMING_DBUF_UPDATE_PENDING, mask_sh),\
SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_DRR_TIMING_DBUF_UPDATE_MODE, mask_sh)
void dcn30_timing_generator_init(struct optc *optc1);
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
index 25a1df45b2641..f96fb425345e4 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
@@ -325,6 +325,7 @@ struct timing_generator_funcs {
uint32_t vtotal_change_limit);
void (*init_odm)(struct timing_generator *tg);
+ void (*wait_drr_doublebuffer_pending_clear)(struct timing_generator *tg);
};
#endif
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 634/885] scsi: snic: Fix memory leak with using debugfs_lookup()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (632 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 633/885] drm/amd/display: Do not commit pipe when updating DRR Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 635/885] scsi: ufs: core: Fix device management cmd timeout flow Greg Kroah-Hartman
` (253 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Karan Tilak Kumar, Sesidhar Baddela,
James E.J. Bottomley, Martin K. Petersen, linux-scsi,
linux-kernel, Sasha Levin
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ad0e4e2fab928477f74d742e6e77d79245d3d3e7 ]
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once.
Link: https://lore.kernel.org/r/20230202141009.2290380-1-gregkh@linuxfoundation.org
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/snic/snic_debugfs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/snic/snic_debugfs.c b/drivers/scsi/snic/snic_debugfs.c
index 57bdc3ba49d9c..9dd975b36b5bd 100644
--- a/drivers/scsi/snic/snic_debugfs.c
+++ b/drivers/scsi/snic/snic_debugfs.c
@@ -437,6 +437,6 @@ void snic_trc_debugfs_init(void)
void
snic_trc_debugfs_term(void)
{
- debugfs_remove(debugfs_lookup(TRC_FILE, snic_glob->trc_root));
- debugfs_remove(debugfs_lookup(TRC_ENABLE_FILE, snic_glob->trc_root));
+ debugfs_lookup_and_remove(TRC_FILE, snic_glob->trc_root);
+ debugfs_lookup_and_remove(TRC_ENABLE_FILE, snic_glob->trc_root);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 635/885] scsi: ufs: core: Fix device management cmd timeout flow
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (633 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 634/885] scsi: snic: Fix memory leak with using debugfs_lookup() Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 636/885] HID: logitech-hidpp: Dont restart communication if not necessary Greg Kroah-Hartman
` (252 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mason Zhang, Bart Van Assche,
Martin K. Petersen, Sasha Levin
From: Mason Zhang <Mason.Zhang@mediatek.com>
[ Upstream commit 36822124f9de200cedc2f42516301b50d386a6cd ]
In the UFS error handling flow, the host will send a device management cmd
(NOP OUT) to the device for link recovery. If this cmd times out and
clearing the doorbell fails, ufshcd_wait_for_dev_cmd() will do nothing and
return. hba->dev_cmd.complete struct is not set to NULL.
When this happens, if cmd has been completed by device, then we will call
complete() in __ufshcd_transfer_req_compl(). Because the complete struct is
allocated on the stack, the following crash will occur:
ipanic_die+0x24/0x38 [mrdump]
die+0x344/0x748
arm64_notify_die+0x44/0x104
do_debug_exception+0x104/0x1e0
el1_dbg+0x38/0x54
el1_sync_handler+0x40/0x88
el1_sync+0x8c/0x140
queued_spin_lock_slowpath+0x2e4/0x3c0
__ufshcd_transfer_req_compl+0x3b0/0x1164
ufshcd_trc_handler+0x15c/0x308
ufshcd_host_reset_and_restore+0x54/0x260
ufshcd_reset_and_restore+0x28c/0x57c
ufshcd_err_handler+0xeb8/0x1b6c
process_one_work+0x288/0x964
worker_thread+0x4bc/0xc7c
kthread+0x15c/0x264
ret_from_fork+0x10/0x30
Link: https://lore.kernel.org/r/20221216032532.1280-1-mason.zhang@mediatek.com
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ufs/core/ufshcd.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index e08ce7f2ff3af..edd34dac91b1d 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -3006,6 +3006,22 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba,
} else {
dev_err(hba->dev, "%s: failed to clear tag %d\n",
__func__, lrbp->task_tag);
+
+ spin_lock_irqsave(&hba->outstanding_lock, flags);
+ pending = test_bit(lrbp->task_tag,
+ &hba->outstanding_reqs);
+ if (pending)
+ hba->dev_cmd.complete = NULL;
+ spin_unlock_irqrestore(&hba->outstanding_lock, flags);
+
+ if (!pending) {
+ /*
+ * The completion handler ran while we tried to
+ * clear the command.
+ */
+ time_left = 1;
+ goto retry;
+ }
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 636/885] HID: logitech-hidpp: Dont restart communication if not necessary
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (634 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 635/885] scsi: ufs: core: Fix device management cmd timeout flow Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 637/885] drm/amd/display: Enable P-state validation checks for DCN314 Greg Kroah-Hartman
` (251 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bastien Nocera, Benjamin Tissoires,
Sasha Levin
From: Bastien Nocera <hadess@hadess.net>
[ Upstream commit 498ba20690357691103de0f766960355247c78be ]
Don't stop and restart communication with the device unless we need to
modify the connect flags used because of a device quirk.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230125121723.3122-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-logitech-hidpp.c | 32 ++++++++++++++++++++------------
1 file changed, 20 insertions(+), 12 deletions(-)
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 19fce82d03f02..fdb66dc065822 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4102,6 +4102,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
bool connected;
unsigned int connect_mask = HID_CONNECT_DEFAULT;
struct hidpp_ff_private_data data;
+ bool will_restart = false;
/* report_fixup needs drvdata to be set before we call hid_parse */
hidpp = devm_kzalloc(&hdev->dev, sizeof(*hidpp), GFP_KERNEL);
@@ -4157,6 +4158,10 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
return ret;
}
+ if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT ||
+ hidpp->quirks & HIDPP_QUIRK_UNIFYING)
+ will_restart = true;
+
INIT_WORK(&hidpp->work, delayed_work_cb);
mutex_init(&hidpp->send_mutex);
init_waitqueue_head(&hidpp->wait);
@@ -4171,7 +4176,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
* Plain USB connections need to actually call start and open
* on the transport driver to allow incoming data.
*/
- ret = hid_hw_start(hdev, 0);
+ ret = hid_hw_start(hdev, will_restart ? 0 : connect_mask);
if (ret) {
hid_err(hdev, "hw start failed\n");
goto hid_hw_start_fail;
@@ -4208,6 +4213,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
hidpp->wireless_feature_index = 0;
else if (ret)
goto hid_hw_init_fail;
+ ret = 0;
}
if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)) {
@@ -4222,19 +4228,21 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
hidpp_connect_event(hidpp);
- /* Reset the HID node state */
- hid_device_io_stop(hdev);
- hid_hw_close(hdev);
- hid_hw_stop(hdev);
+ if (will_restart) {
+ /* Reset the HID node state */
+ hid_device_io_stop(hdev);
+ hid_hw_close(hdev);
+ hid_hw_stop(hdev);
- if (hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT)
- connect_mask &= ~HID_CONNECT_HIDINPUT;
+ if (hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT)
+ connect_mask &= ~HID_CONNECT_HIDINPUT;
- /* Now export the actual inputs and hidraw nodes to the world */
- ret = hid_hw_start(hdev, connect_mask);
- if (ret) {
- hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
- goto hid_hw_start_fail;
+ /* Now export the actual inputs and hidraw nodes to the world */
+ ret = hid_hw_start(hdev, connect_mask);
+ if (ret) {
+ hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
+ goto hid_hw_start_fail;
+ }
}
if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 637/885] drm/amd/display: Enable P-state validation checks for DCN314
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (635 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 636/885] HID: logitech-hidpp: Dont restart communication if not necessary Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 638/885] drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5 Greg Kroah-Hartman
` (250 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hansen Dsouza, Qingqing Zhuo,
Nicholas Kazlauskas, Daniel Wheeler, Alex Deucher, Sasha Levin
From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
[ Upstream commit 37d184b548db0f64d4a878960b2c6988b38a3e7e ]
[Why]
To align with DCN31 behavior. This helps avoid p-state hangs in
the case where underflow does occur.
[How]
Flip the bit to true.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
index c80c8c8f51e97..5985ce8df4e08 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
@@ -897,7 +897,7 @@ static const struct dc_debug_options debug_defaults_drv = {
.max_downscale_src_width = 4096,/*upto true 4k*/
.disable_pplib_wm_range = false,
.scl_reset_length10 = true,
- .sanity_checks = false,
+ .sanity_checks = true,
.underflow_assert_delay_us = 0xFFFFFFFF,
.dwb_fi_phase = -1, // -1 = disable,
.dmub_command_table = true,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 638/885] drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (636 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 637/885] drm/amd/display: Enable P-state validation checks for DCN314 Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 639/885] drm/amd/display: Disable HUBP/DPP PG on DCN314 for now Greg Kroah-Hartman
` (249 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Darrell Kavanagh, Hans de Goede,
Sasha Levin
From: Darrell Kavanagh <darrell.kavanagh@gmail.com>
[ Upstream commit 38b2d8efd03d2e56431b611e3523f0158306451d ]
Another Lenovo convertable where the panel is installed landscape but is
reported to the kernel as portrait.
Signed-off-by: Darrell Kavanagh <darrell.kavanagh@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230214164659.3583-1-darrell.kavanagh@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index b409fe256fd0a..5522d610c5cfd 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -322,6 +322,12 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad D330-10IGL"),
},
.driver_data = (void *)&lcd800x1280_rightside_up,
+ }, { /* Lenovo IdeaPad Duet 3 10IGL5 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "IdeaPad Duet 3 10IGL5"),
+ },
+ .driver_data = (void *)&lcd1200x1920_rightside_up,
}, { /* Lenovo Yoga Book X90F / X91F / X91L */
.matches = {
/* Non exact match to match all versions */
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 639/885] drm/amd/display: Disable HUBP/DPP PG on DCN314 for now
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (637 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 638/885] drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5 Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 640/885] dm thin: add cond_resched() to various workqueue loops Greg Kroah-Hartman
` (248 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hansen Dsouza, Qingqing Zhuo,
Nicholas Kazlauskas, Daniel Wheeler, Alex Deucher, Sasha Levin
From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
[ Upstream commit b7c67f72408b11b922f23f06c7df0f6743a2e89d ]
[Why]
The DMCUB implementation required to workaround corruption is
not currently stable and may cause intermittent corruption or hangs.
[How]
Disable PG until the sequence is stable.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
index 5985ce8df4e08..9918bccd6defb 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
@@ -888,6 +888,8 @@ static const struct dc_debug_options debug_defaults_drv = {
.force_abm_enable = false,
.timing_trace = false,
.clock_trace = true,
+ .disable_dpp_power_gate = true,
+ .disable_hubp_power_gate = true,
.disable_pplib_clock_request = false,
.pipe_split_policy = MPC_SPLIT_DYNAMIC,
.force_single_disp_pipe_split = false,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 640/885] dm thin: add cond_resched() to various workqueue loops
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (638 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 639/885] drm/amd/display: Disable HUBP/DPP PG on DCN314 for now Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 641/885] dm cache: " Greg Kroah-Hartman
` (247 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Mike Snitzer, Sasha Levin
From: Mike Snitzer <snitzer@kernel.org>
[ Upstream commit e4f80303c2353952e6e980b23914e4214487f2a6 ]
Otherwise on resource constrained systems these workqueues may be too
greedy.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/dm-thin.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 196f82559ad6b..d28c9077d6ed2 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -2207,6 +2207,7 @@ static void process_thin_deferred_bios(struct thin_c *tc)
throttle_work_update(&pool->throttle);
dm_pool_issue_prefetches(pool->pmd);
}
+ cond_resched();
}
blk_finish_plug(&plug);
}
@@ -2289,6 +2290,7 @@ static void process_thin_deferred_cells(struct thin_c *tc)
else
pool->process_cell(tc, cell);
}
+ cond_resched();
} while (!list_empty(&cells));
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 641/885] dm cache: add cond_resched() to various workqueue loops
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (639 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 640/885] dm thin: add cond_resched() to various workqueue loops Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 642/885] nfsd: zero out pointers after putting nfsd_files on COPY setup error Greg Kroah-Hartman
` (246 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Mike Snitzer, Sasha Levin
From: Mike Snitzer <snitzer@kernel.org>
[ Upstream commit 76227f6dc805e9e960128bcc6276647361e0827c ]
Otherwise on resource constrained systems these workqueues may be too
greedy.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/dm-cache-target.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c
index 5e92fac90b675..17fde3e5a1f7b 100644
--- a/drivers/md/dm-cache-target.c
+++ b/drivers/md/dm-cache-target.c
@@ -1805,6 +1805,7 @@ static void process_deferred_bios(struct work_struct *ws)
else
commit_needed = process_bio(cache, bio) || commit_needed;
+ cond_resched();
}
if (commit_needed)
@@ -1827,6 +1828,7 @@ static void requeue_deferred_bios(struct cache *cache)
while ((bio = bio_list_pop(&bios))) {
bio->bi_status = BLK_STS_DM_REQUEUE;
bio_endio(bio);
+ cond_resched();
}
}
@@ -1867,6 +1869,8 @@ static void check_migrations(struct work_struct *ws)
r = mg_start(cache, op, NULL);
if (r)
break;
+
+ cond_resched();
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 642/885] nfsd: zero out pointers after putting nfsd_files on COPY setup error
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (640 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 641/885] dm cache: " Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 643/885] nfsd: dont hand out delegation on setuid files being opened for write Greg Kroah-Hartman
` (245 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jeff Layton, Chuck Lever, Sasha Levin
From: Jeff Layton <jlayton@kernel.org>
[ Upstream commit 1f0001d43d0c0ac2a19a34a914f6595ad97cbc1d ]
At first, I thought this might be a source of nfsd_file overputs, but
the current callers seem to avoid an extra put when nfsd4_verify_copy
returns an error.
Still, it's "bad form" to leave the pointers filled out when we don't
have a reference to them anymore, and that might lead to bugs later.
Zero them out as a defensive coding measure.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs4proc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index 53113976e6424..a90e792a94d77 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1227,8 +1227,10 @@ nfsd4_verify_copy(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
return status;
out_put_dst:
nfsd_file_put(*dst);
+ *dst = NULL;
out_put_src:
nfsd_file_put(*src);
+ *src = NULL;
goto out;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 643/885] nfsd: dont hand out delegation on setuid files being opened for write
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (641 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 642/885] nfsd: zero out pointers after putting nfsd_files on COPY setup error Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 644/885] cifs: prevent data race in smb2_reconnect() Greg Kroah-Hartman
` (244 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Boyang Xue, Jeff Layton,
Chuck Lever, Sasha Levin
From: Jeff Layton <jlayton@kernel.org>
[ Upstream commit 826b67e6376c2a788e3a62c4860dcd79500a27d5 ]
We had a bug report that xfstest generic/355 was failing on NFSv4.0.
This test sets various combinations of setuid/setgid modes and tests
whether DIO writes will cause them to be stripped.
What I found was that the server did properly strip those bits, but
the client didn't notice because it held a delegation that was not
recalled. The recall didn't occur because the client itself was the
one generating the activity and we avoid recalls in that case.
Clearing setuid bits is an "implicit" activity. The client didn't
specifically request that we do that, so we need the server to issue a
CB_RECALL, or avoid the situation entirely by not issuing a delegation.
The easiest fix here is to simply not give out a delegation if the file
is being opened for write, and the mode has the setuid and/or setgid bit
set. Note that there is a potential race between the mode and lease
being set, so we test for this condition both before and after setting
the lease.
This patch fixes generic/355, generic/683 and generic/684 for me. (Note
that 355 fails only on v4.0, and 683 and 684 require NFSv4.2 to run and
fail).
Reported-by: Boyang Xue <bxue@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs4state.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index a768b8701b44e..34561764e5c97 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -5399,6 +5399,23 @@ nfsd4_verify_deleg_dentry(struct nfsd4_open *open, struct nfs4_file *fp,
return 0;
}
+/*
+ * We avoid breaking delegations held by a client due to its own activity, but
+ * clearing setuid/setgid bits on a write is an implicit activity and the client
+ * may not notice and continue using the old mode. Avoid giving out a delegation
+ * on setuid/setgid files when the client is requesting an open for write.
+ */
+static int
+nfsd4_verify_setuid_write(struct nfsd4_open *open, struct nfsd_file *nf)
+{
+ struct inode *inode = file_inode(nf->nf_file);
+
+ if ((open->op_share_access & NFS4_SHARE_ACCESS_WRITE) &&
+ (inode->i_mode & (S_ISUID|S_ISGID)))
+ return -EAGAIN;
+ return 0;
+}
+
static struct nfs4_delegation *
nfs4_set_delegation(struct nfsd4_open *open, struct nfs4_ol_stateid *stp,
struct svc_fh *parent)
@@ -5432,6 +5449,8 @@ nfs4_set_delegation(struct nfsd4_open *open, struct nfs4_ol_stateid *stp,
spin_lock(&fp->fi_lock);
if (nfs4_delegation_exists(clp, fp))
status = -EAGAIN;
+ else if (nfsd4_verify_setuid_write(open, nf))
+ status = -EAGAIN;
else if (!fp->fi_deleg_file) {
fp->fi_deleg_file = nf;
/* increment early to prevent fi_deleg_file from being
@@ -5472,6 +5491,14 @@ nfs4_set_delegation(struct nfsd4_open *open, struct nfs4_ol_stateid *stp,
if (status)
goto out_unlock;
+ /*
+ * Now that the deleg is set, check again to ensure that nothing
+ * raced in and changed the mode while we weren't lookng.
+ */
+ status = nfsd4_verify_setuid_write(open, fp->fi_deleg_file);
+ if (status)
+ goto out_unlock;
+
spin_lock(&state_lock);
spin_lock(&fp->fi_lock);
if (fp->fi_had_conflict)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 644/885] cifs: prevent data race in smb2_reconnect()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (642 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 643/885] nfsd: dont hand out delegation on setuid files being opened for write Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 645/885] drm/shmem-helper: Revert accidental non-GPL export Greg Kroah-Hartman
` (243 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paulo Alcantara (SUSE),
Steve French, Sasha Levin
From: Paulo Alcantara <pc@cjr.nz>
[ Upstream commit 3c0070f54b3128de498c2dd9934a21f0dd867111 ]
Make sure to get an up-to-date TCP_Server_Info::nr_targets value prior
to waiting the server to be reconnected in smb2_reconnect(). It is
set in cifs_tcp_ses_needs_reconnect() and protected by
TCP_Server_Info::srv_lock.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/smb2pdu.c | 119 +++++++++++++++++++++++++---------------------
1 file changed, 64 insertions(+), 55 deletions(-)
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index 3b93680a319e4..5a063af8a094e 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -139,6 +139,66 @@ smb2_hdr_assemble(struct smb2_hdr *shdr, __le16 smb2_cmd,
return;
}
+static int wait_for_server_reconnect(struct TCP_Server_Info *server,
+ __le16 smb2_command, bool retry)
+{
+ int timeout = 10;
+ int rc;
+
+ spin_lock(&server->srv_lock);
+ if (server->tcpStatus != CifsNeedReconnect) {
+ spin_unlock(&server->srv_lock);
+ return 0;
+ }
+ timeout *= server->nr_targets;
+ spin_unlock(&server->srv_lock);
+
+ /*
+ * Return to caller for TREE_DISCONNECT and LOGOFF and CLOSE
+ * here since they are implicitly done when session drops.
+ */
+ switch (smb2_command) {
+ /*
+ * BB Should we keep oplock break and add flush to exceptions?
+ */
+ case SMB2_TREE_DISCONNECT:
+ case SMB2_CANCEL:
+ case SMB2_CLOSE:
+ case SMB2_OPLOCK_BREAK:
+ return -EAGAIN;
+ }
+
+ /*
+ * Give demultiplex thread up to 10 seconds to each target available for
+ * reconnect -- should be greater than cifs socket timeout which is 7
+ * seconds.
+ *
+ * On "soft" mounts we wait once. Hard mounts keep retrying until
+ * process is killed or server comes back on-line.
+ */
+ do {
+ rc = wait_event_interruptible_timeout(server->response_q,
+ (server->tcpStatus != CifsNeedReconnect),
+ timeout * HZ);
+ if (rc < 0) {
+ cifs_dbg(FYI, "%s: aborting reconnect due to received signal\n",
+ __func__);
+ return -ERESTARTSYS;
+ }
+
+ /* are we still trying to reconnect? */
+ spin_lock(&server->srv_lock);
+ if (server->tcpStatus != CifsNeedReconnect) {
+ spin_unlock(&server->srv_lock);
+ return 0;
+ }
+ spin_unlock(&server->srv_lock);
+ } while (retry);
+
+ cifs_dbg(FYI, "%s: gave up waiting on reconnect\n", __func__);
+ return -EHOSTDOWN;
+}
+
static int
smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon,
struct TCP_Server_Info *server)
@@ -146,7 +206,6 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon,
int rc = 0;
struct nls_table *nls_codepage;
struct cifs_ses *ses;
- int retries;
/*
* SMB2s NegProt, SessSetup, Logoff do not have tcon yet so
@@ -184,61 +243,11 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon,
(!tcon->ses->server) || !server)
return -EIO;
- ses = tcon->ses;
- retries = server->nr_targets;
-
- /*
- * Give demultiplex thread up to 10 seconds to each target available for
- * reconnect -- should be greater than cifs socket timeout which is 7
- * seconds.
- */
- while (server->tcpStatus == CifsNeedReconnect) {
- /*
- * Return to caller for TREE_DISCONNECT and LOGOFF and CLOSE
- * here since they are implicitly done when session drops.
- */
- switch (smb2_command) {
- /*
- * BB Should we keep oplock break and add flush to exceptions?
- */
- case SMB2_TREE_DISCONNECT:
- case SMB2_CANCEL:
- case SMB2_CLOSE:
- case SMB2_OPLOCK_BREAK:
- return -EAGAIN;
- }
-
- rc = wait_event_interruptible_timeout(server->response_q,
- (server->tcpStatus != CifsNeedReconnect),
- 10 * HZ);
- if (rc < 0) {
- cifs_dbg(FYI, "%s: aborting reconnect due to a received signal by the process\n",
- __func__);
- return -ERESTARTSYS;
- }
-
- /* are we still trying to reconnect? */
- spin_lock(&server->srv_lock);
- if (server->tcpStatus != CifsNeedReconnect) {
- spin_unlock(&server->srv_lock);
- break;
- }
- spin_unlock(&server->srv_lock);
-
- if (retries && --retries)
- continue;
+ rc = wait_for_server_reconnect(server, smb2_command, tcon->retry);
+ if (rc)
+ return rc;
- /*
- * on "soft" mounts we wait once. Hard mounts keep
- * retrying until process is killed or server comes
- * back on-line
- */
- if (!tcon->retry) {
- cifs_dbg(FYI, "gave up waiting on reconnect in smb_init\n");
- return -EHOSTDOWN;
- }
- retries = server->nr_targets;
- }
+ ses = tcon->ses;
spin_lock(&ses->chan_lock);
if (!cifs_chan_needs_reconnect(ses, server) && !tcon->need_reconnect) {
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 645/885] drm/shmem-helper: Revert accidental non-GPL export
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (643 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 644/885] cifs: prevent data race in smb2_reconnect() Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 646/885] driver core: fw_devlink: Avoid spurious error message Greg Kroah-Hartman
` (242 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Osipenko, Asahi Lina,
Thomas Zimmermann, Sasha Levin
From: Asahi Lina <lina@asahilina.net>
[ Upstream commit 047a754558d640eaa080fce3b22ca9f3d4e04626 ]
The referenced commit added a wrapper for drm_gem_shmem_get_pages_sgt(),
but in the process it accidentally changed the export type from GPL to
non-GPL. Switch it back to GPL.
Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Fixes: ddddedaa0db9 ("drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230227-shmem-export-fix-v1-1-8880b2c25e81@asahilina.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_gem_shmem_helper.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_gem_shmem_helper.c b/drivers/gpu/drm/drm_gem_shmem_helper.c
index 2c559b310cad3..7af9da886d4e5 100644
--- a/drivers/gpu/drm/drm_gem_shmem_helper.c
+++ b/drivers/gpu/drm/drm_gem_shmem_helper.c
@@ -747,7 +747,7 @@ struct sg_table *drm_gem_shmem_get_pages_sgt(struct drm_gem_shmem_object *shmem)
return sgt;
}
-EXPORT_SYMBOL(drm_gem_shmem_get_pages_sgt);
+EXPORT_SYMBOL_GPL(drm_gem_shmem_get_pages_sgt);
/**
* drm_gem_shmem_prime_import_sg_table - Produce a shmem GEM object from
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 646/885] driver core: fw_devlink: Avoid spurious error message
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (644 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 645/885] drm/shmem-helper: Revert accidental non-GPL export Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 647/885] wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu Greg Kroah-Hartman
` (241 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vladimir Oltean, Dmitry Baryshkov,
Saravana Kannan, Sasha Levin
From: Saravana Kannan <saravanak@google.com>
[ Upstream commit 6309872413f14f3d58c13ae4dc85b1a7004b4193 ]
fw_devlink can sometimes try to create a device link with the consumer
and supplier as the same device. These attempts will fail (correctly),
but are harmless. So, avoid printing an error for these cases. Also, add
more detail to the error message.
Fixes: 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust")
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20230225064148.274376-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index ac08d475e2828..e30223c2672fc 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -2087,9 +2087,9 @@ static int fw_devlink_create_devlink(struct device *con,
goto out;
}
- if (!device_link_add(con, sup_dev, flags)) {
- dev_err(con, "Failed to create device link with %s\n",
- dev_name(sup_dev));
+ if (con != sup_dev && !device_link_add(con, sup_dev, flags)) {
+ dev_err(con, "Failed to create device link (0x%x) with %s\n",
+ flags, dev_name(sup_dev));
ret = -EINVAL;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 647/885] wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (645 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 646/885] driver core: fw_devlink: Avoid spurious error message Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 648/885] scsi: mpt3sas: Remove usage of dma_get_required_mask() API Greg Kroah-Hartman
` (240 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jun ASAKA, Ping-Ke Shih, Kalle Valo
From: Jun ASAKA <JunASAKA@zzy040330.moe>
commit c6015bf3ff1ffb3caa27eb913797438a0fc634a0 upstream.
Fixing transmission failure which results in
"authentication with ... timed out". This can be
fixed by disable the REG_TXPAUSE.
Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217030659.12577-1-JunASAKA@zzy040330.moe
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
@@ -1669,6 +1669,11 @@ static void rtl8192e_enable_rf(struct rt
val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1);
val8 &= ~BIT(0);
rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8);
+
+ /*
+ * Fix transmission failure of rtl8192e.
+ */
+ rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
}
struct rtl8xxxu_fileops rtl8192eu_fops = {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 648/885] scsi: mpt3sas: Remove usage of dma_get_required_mask() API
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (646 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 647/885] wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 649/885] firmware: coreboot: framebuffer: Ignore reserved pixel color bits Greg Kroah-Hartman
` (239 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sreekanth Reddy, Christoph Hellwig,
Martin K. Petersen, Salvatore Bonaccorso
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
commit 06e472acf964649a58b7de35fc9cdc3151acb970 upstream.
Remove the usage of dma_get_required_mask() API. Directly set the DMA mask
to 63/64 if the system is a 64bit machine.
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20221028091655.17741-2-sreekanth.reddy@broadcom.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -2992,8 +2992,7 @@ _base_config_dma_addressing(struct MPT3S
struct sysinfo s;
u64 coherent_dma_mask, dma_mask;
- if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 ||
- dma_get_required_mask(&pdev->dev) <= DMA_BIT_MASK(32)) {
+ if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4) {
ioc->dma_mask = 32;
coherent_dma_mask = dma_mask = DMA_BIT_MASK(32);
/* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 649/885] firmware: coreboot: framebuffer: Ignore reserved pixel color bits
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (647 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 648/885] scsi: mpt3sas: Remove usage of dma_get_required_mask() API Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 650/885] block: dont allow multiple bios for IOCB_NOWAIT issue Greg Kroah-Hartman
` (238 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alper Nebi Yasak, Salvatore Bonaccorso
From: Alper Nebi Yasak <alpernebiyasak@gmail.com>
commit e6acaf25cba14661211bb72181c35dd13b24f5b3 upstream.
The coreboot framebuffer doesn't support transparency, its 'reserved'
bit field is merely padding for byte/word alignment of pixel colors [1].
When trying to match the framebuffer to a simplefb format, the kernel
driver unnecessarily requires the format's transparency bit field to
exactly match this padding, even if the former is zero-width.
Due to a coreboot bug [2] (fixed upstream), some boards misreport the
reserved field's size as equal to its position (0x18 for both on a
'Lick' Chromebook), and the driver fails to probe where it would have
otherwise worked fine with e.g. the a8r8g8b8 or x8r8g8b8 formats.
Remove the transparency comparison with reserved bits. When the
bits-per-pixel and other color components match, transparency will
already be in a subset of the reserved field. Not forcing it to match
reserved bits allows the driver to work on the boards which misreport
the reserved field. It also enables using simplefb formats that don't
have transparency bits, although this doesn't currently happen due to
format support and ordering in linux/platform_data/simplefb.h.
[1] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.19/src/commonlib/include/commonlib/coreboot_tables.h#255
[2] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.13/src/drivers/intel/fsp2_0/graphics.c#82
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230122190433.195941-1-alpernebiyasak@gmail.com
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/firmware/google/framebuffer-coreboot.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/firmware/google/framebuffer-coreboot.c
+++ b/drivers/firmware/google/framebuffer-coreboot.c
@@ -43,9 +43,7 @@ static int framebuffer_probe(struct core
fb->green_mask_pos == formats[i].green.offset &&
fb->green_mask_size == formats[i].green.length &&
fb->blue_mask_pos == formats[i].blue.offset &&
- fb->blue_mask_size == formats[i].blue.length &&
- fb->reserved_mask_pos == formats[i].transp.offset &&
- fb->reserved_mask_size == formats[i].transp.length)
+ fb->blue_mask_size == formats[i].blue.length)
pdata.format = formats[i].name;
}
if (!pdata.format)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 650/885] block: dont allow multiple bios for IOCB_NOWAIT issue
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (648 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 649/885] firmware: coreboot: framebuffer: Ignore reserved pixel color bits Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 651/885] block: clear bio->bi_bdev when putting a bio back in the cache Greg Kroah-Hartman
` (237 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jens Axboe, Michael Kelley
From: Jens Axboe <axboe@kernel.dk>
commit 67d59247d4b52c917e373f05a807027756ab216f upstream.
If we're doing a large IO request which needs to be split into multiple
bios for issue, then we can run into the same situation as the below
marked commit fixes - parts will complete just fine, one or more parts
will fail to allocate a request. This will result in a partially
completed read or write request, where the caller gets EAGAIN even though
parts of the IO completed just fine.
Do the same for large bios as we do for splits - fail a NOWAIT request
with EAGAIN. This isn't technically fixing an issue in the below marked
patch, but for stable purposes, we should have either none of them or
both.
This depends on: 613b14884b85 ("block: handle bio_split_to_limits() NULL return")
Cc: stable@vger.kernel.org # 5.15+
Fixes: 9cea62b2cbab ("block: don't allow splitting of a REQ_NOWAIT bio")
Link: https://github.com/axboe/liburing/issues/766
Reported-and-tested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
block/fops.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
--- a/block/fops.c
+++ b/block/fops.c
@@ -221,6 +221,24 @@ static ssize_t __blkdev_direct_IO(struct
bio_endio(bio);
break;
}
+ if (iocb->ki_flags & IOCB_NOWAIT) {
+ /*
+ * This is nonblocking IO, and we need to allocate
+ * another bio if we have data left to map. As we
+ * cannot guarantee that one of the sub bios will not
+ * fail getting issued FOR NOWAIT and as error results
+ * are coalesced across all of them, be safe and ask for
+ * a retry of this from blocking context.
+ */
+ if (unlikely(iov_iter_count(iter))) {
+ bio_release_pages(bio, false);
+ bio_clear_flag(bio, BIO_REFFED);
+ bio_put(bio);
+ blk_finish_plug(&plug);
+ return -EAGAIN;
+ }
+ bio->bi_opf |= REQ_NOWAIT;
+ }
if (is_read) {
if (dio->flags & DIO_SHOULD_DIRTY)
@@ -228,9 +246,6 @@ static ssize_t __blkdev_direct_IO(struct
} else {
task_io_account_write(bio->bi_iter.bi_size);
}
- if (iocb->ki_flags & IOCB_NOWAIT)
- bio->bi_opf |= REQ_NOWAIT;
-
dio->size += bio->bi_iter.bi_size;
pos += bio->bi_iter.bi_size;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 651/885] block: clear bio->bi_bdev when putting a bio back in the cache
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (649 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 650/885] block: dont allow multiple bios for IOCB_NOWAIT issue Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 652/885] block: be a bit more careful in checking for NULL bdev while polling Greg Kroah-Hartman
` (236 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Keith Busch, Jens Axboe
From: Jens Axboe <axboe@kernel.dk>
commit 11eb695feb636fa5211067189cad25ac073e7fe5 upstream.
This isn't strictly needed in terms of correctness, but it does allow
polling to know if the bio has been put already by a different task
and hence avoid polling something that we don't need to.
Cc: stable@vger.kernel.org
Fixes: be4d234d7aeb ("bio: add allocation cache abstraction")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
block/bio.c | 1 +
1 file changed, 1 insertion(+)
--- a/block/bio.c
+++ b/block/bio.c
@@ -747,6 +747,7 @@ void bio_put(struct bio *bio)
bio_uninit(bio);
cache = per_cpu_ptr(bio->bi_pool->cache, get_cpu());
bio->bi_next = cache->free_list;
+ bio->bi_bdev = NULL;
cache->free_list = bio;
if (++cache->nr > ALLOC_CACHE_MAX + ALLOC_CACHE_SLACK)
bio_alloc_cache_prune(cache, ALLOC_CACHE_SLACK);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 652/885] block: be a bit more careful in checking for NULL bdev while polling
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (650 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 651/885] block: clear bio->bi_bdev when putting a bio back in the cache Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 653/885] rtc: pm8xxx: fix set-alarm race Greg Kroah-Hartman
` (235 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Keith Busch, Jens Axboe, Wei Zhang
From: Jens Axboe <axboe@kernel.dk>
commit 310726c33ad76cebdee312dbfafc12c1b44bf977 upstream.
Wei reports a crash with an application using polled IO:
PGD 14265e067 P4D 14265e067 PUD 47ec50067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 21915 Comm: iocore_0 Kdump: loaded Tainted: G S 5.12.0-0_fbk12_clang_7346_g1bb6f2e7058f #1
Hardware name: Wiwynn Delta Lake MP T8/Delta Lake-Class2, BIOS Y3DLM08 04/10/2022
RIP: 0010:bio_poll+0x25/0x200
Code: 0f 1f 44 00 00 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 28 65 48 8b 04 25 28 00 00 00 48 89 44 24 20 48 8b 47 08 <48> 8b 80 70 02 00 00 4c 8b 70 50 8b 6f 34 31 db 83 fd ff 75 25 65
RSP: 0018:ffffc90005fafdf8 EFLAGS: 00010292
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 74b43cd65dd66600
RDX: 0000000000000003 RSI: ffffc90005fafe78 RDI: ffff8884b614e140
RBP: ffff88849964df78 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88849964df00
R13: ffffc90005fafe78 R14: ffff888137d3c378 R15: 0000000000000001
FS: 00007fd195000640(0000) GS:ffff88903f400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000270 CR3: 0000000466121001 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
iocb_bio_iopoll+0x1d/0x30
io_do_iopoll+0xac/0x250
__se_sys_io_uring_enter+0x3c5/0x5a0
? __x64_sys_write+0x89/0xd0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x94f225d
Code: 24 cc 00 00 00 41 8b 84 24 d0 00 00 00 c1 e0 04 83 e0 10 41 09 c2 8b 33 8b 53 04 4c 8b 43 18 4c 63 4b 0c b8 aa 01 00 00 0f 05 <85> c0 0f 88 85 00 00 00 29 03 45 84 f6 0f 84 88 00 00 00 41 f6 c7
RSP: 002b:00007fd194ffcd88 EFLAGS: 00000202 ORIG_RAX: 00000000000001aa
RAX: ffffffffffffffda RBX: 00007fd194ffcdc0 RCX: 00000000094f225d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000007
RBP: 00007fd194ffcdb0 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000001 R11: 0000000000000202 R12: 00007fd269d68030
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
which is due to bio->bi_bdev being NULL. This can happen if we have two
tasks doing polled IO, and task B ends up completing IO from task A if
they are sharing a poll queue. If task B completes the IO and puts the
bio into our cache, then it can allocate that bio again before task A
is done polling for it. As that would necessitate a preempt between the
two tasks, it's enough to just be a bit more careful in checking for
whether or not bio->bi_bdev is NULL.
Reported-and-tested-by: Wei Zhang <wzhang@meta.com>
Cc: stable@vger.kernel.org
Fixes: be4d234d7aeb ("bio: add allocation cache abstraction")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
block/blk-core.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -842,10 +842,16 @@ EXPORT_SYMBOL(submit_bio);
*/
int bio_poll(struct bio *bio, struct io_comp_batch *iob, unsigned int flags)
{
- struct request_queue *q = bdev_get_queue(bio->bi_bdev);
blk_qc_t cookie = READ_ONCE(bio->bi_cookie);
+ struct block_device *bdev;
+ struct request_queue *q;
int ret = 0;
+ bdev = READ_ONCE(bio->bi_bdev);
+ if (!bdev)
+ return 0;
+
+ q = bdev_get_queue(bdev);
if (cookie == BLK_QC_T_NONE ||
!test_bit(QUEUE_FLAG_POLL, &q->queue_flags))
return 0;
@@ -905,7 +911,7 @@ int iocb_bio_iopoll(struct kiocb *kiocb,
*/
rcu_read_lock();
bio = READ_ONCE(kiocb->private);
- if (bio && bio->bi_bdev)
+ if (bio)
ret = bio_poll(bio, iob, flags);
rcu_read_unlock();
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 653/885] rtc: pm8xxx: fix set-alarm race
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (651 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 652/885] block: be a bit more careful in checking for NULL bdev while polling Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 654/885] ipmi: ipmb: Fix the MODULE_PARM_DESC associated to retry_time_ms Greg Kroah-Hartman
` (234 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Johan Hovold, David Collins,
Alexandre Belloni
From: Johan Hovold <johan+linaro@kernel.org>
commit c88db0eff9722fc2b6c4d172a50471d20e08ecc6 upstream.
Make sure to disable the alarm before updating the four alarm time
registers to avoid spurious alarms during the update.
Note that the disable needs to be done outside of the ctrl_reg_lock
section to prevent a racing alarm interrupt from disabling the newly set
alarm when the lock is released.
Fixes: 9a9a54ad7aa2 ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC")
Cc: stable@vger.kernel.org # 3.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Link: https://lore.kernel.org/r/20230202155448.6715-2-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/rtc/rtc-pm8xxx.c | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -221,7 +221,6 @@ static int pm8xxx_rtc_set_alarm(struct d
{
int rc, i;
u8 value[NUM_8_BIT_RTC_REGS];
- unsigned int ctrl_reg;
unsigned long secs, irq_flags;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
@@ -233,6 +232,11 @@ static int pm8xxx_rtc_set_alarm(struct d
secs >>= 8;
}
+ rc = regmap_update_bits(rtc_dd->regmap, regs->alarm_ctrl,
+ regs->alarm_en, 0);
+ if (rc)
+ return rc;
+
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
@@ -242,19 +246,11 @@ static int pm8xxx_rtc_set_alarm(struct d
goto rtc_rw_fail;
}
- rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
- if (rc)
- goto rtc_rw_fail;
-
- if (alarm->enabled)
- ctrl_reg |= regs->alarm_en;
- else
- ctrl_reg &= ~regs->alarm_en;
-
- rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
- if (rc) {
- dev_err(dev, "Write to RTC alarm control register failed\n");
- goto rtc_rw_fail;
+ if (alarm->enabled) {
+ rc = regmap_update_bits(rtc_dd->regmap, regs->alarm_ctrl,
+ regs->alarm_en, regs->alarm_en);
+ if (rc)
+ goto rtc_rw_fail;
}
dev_dbg(dev, "Alarm Set for h:m:s=%ptRt, y-m-d=%ptRdr\n",
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 654/885] ipmi: ipmb: Fix the MODULE_PARM_DESC associated to retry_time_ms
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (652 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 653/885] rtc: pm8xxx: fix set-alarm race Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 655/885] ipmi:ssif: resend_msg() cannot fail Greg Kroah-Hartman
` (233 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Christophe JAILLET, Corey Minyard
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
commit befb28f2676a65a5a4cc4626ae224461d8785af6 upstream.
'This should be 'retry_time_ms' instead of 'max_retries'.
Fixes: 63c4eb347164 ("ipmi:ipmb: Add initial support for IPMI over IPMB")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <0d8670cff2c656e99a832a249e77dc90578f67de.1675591429.git.christophe.jaillet@wanadoo.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/char/ipmi/ipmi_ipmb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/char/ipmi/ipmi_ipmb.c
+++ b/drivers/char/ipmi/ipmi_ipmb.c
@@ -27,7 +27,7 @@ MODULE_PARM_DESC(bmcaddr, "Address to us
static unsigned int retry_time_ms = 250;
module_param(retry_time_ms, uint, 0644);
-MODULE_PARM_DESC(max_retries, "Timeout time between retries, in milliseconds.");
+MODULE_PARM_DESC(retry_time_ms, "Timeout time between retries, in milliseconds.");
static unsigned int max_retries = 1;
module_param(max_retries, uint, 0644);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 655/885] ipmi:ssif: resend_msg() cannot fail
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (653 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 654/885] ipmi: ipmb: Fix the MODULE_PARM_DESC associated to retry_time_ms Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 656/885] ipmi_ssif: Rename idle state and check Greg Kroah-Hartman
` (232 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
commit 95767ed78a181d5404202627499f9cde56053b96 upstream.
The resend_msg() function cannot fail, but there was error handling
around using it. Rework the handling of the error, and fix the out of
retries debug reporting that was wrong around this, too.
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/char/ipmi/ipmi_ssif.c | 28 +++++++---------------------
1 file changed, 7 insertions(+), 21 deletions(-)
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -602,7 +602,7 @@ static void ssif_alert(struct i2c_client
start_get(ssif_info);
}
-static int start_resend(struct ssif_info *ssif_info);
+static void start_resend(struct ssif_info *ssif_info);
static void msg_done_handler(struct ssif_info *ssif_info, int result,
unsigned char *data, unsigned int len)
@@ -909,31 +909,17 @@ static void msg_written_handler(struct s
if (result < 0) {
ssif_info->retries_left--;
if (ssif_info->retries_left > 0) {
- if (!start_resend(ssif_info)) {
- ssif_inc_stat(ssif_info, send_retries);
- return;
- }
- /* request failed, just return the error. */
- ssif_inc_stat(ssif_info, send_errors);
-
- if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
- dev_dbg(&ssif_info->client->dev,
- "%s: Out of retries\n", __func__);
- msg_done_handler(ssif_info, -EIO, NULL, 0);
+ start_resend(ssif_info);
return;
}
ssif_inc_stat(ssif_info, send_errors);
- /*
- * Got an error on transmit, let the done routine
- * handle it.
- */
if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
dev_dbg(&ssif_info->client->dev,
- "%s: Error %d\n", __func__, result);
+ "%s: Out of retries\n", __func__);
- msg_done_handler(ssif_info, result, NULL, 0);
+ msg_done_handler(ssif_info, -EIO, NULL, 0);
return;
}
@@ -996,7 +982,7 @@ static void msg_written_handler(struct s
}
}
-static int start_resend(struct ssif_info *ssif_info)
+static void start_resend(struct ssif_info *ssif_info)
{
int command;
@@ -1021,7 +1007,6 @@ static int start_resend(struct ssif_info
ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE,
command, ssif_info->data, I2C_SMBUS_BLOCK_DATA);
- return 0;
}
static int start_send(struct ssif_info *ssif_info,
@@ -1036,7 +1021,8 @@ static int start_send(struct ssif_info *
ssif_info->retries_left = SSIF_SEND_RETRIES;
memcpy(ssif_info->data + 1, data, len);
ssif_info->data_len = len;
- return start_resend(ssif_info);
+ start_resend(ssif_info);
+ return 0;
}
/* Must be called with the message lock held. */
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 656/885] ipmi_ssif: Rename idle state and check
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (654 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 655/885] ipmi:ssif: resend_msg() cannot fail Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 657/885] io_uring: Replace 0-length array with flexible array Greg Kroah-Hartman
` (231 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
commit 8230831c43a328c2be6d28c65d3f77e14c59986b upstream.
Rename the SSIF_IDLE() to IS_SSIF_IDLE(), since that is more clear, and
rename SSIF_NORMAL to SSIF_IDLE, since that's more accurate.
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/char/ipmi/ipmi_ssif.c | 46 +++++++++++++++++++++---------------------
1 file changed, 23 insertions(+), 23 deletions(-)
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -92,7 +92,7 @@
#define SSIF_WATCH_WATCHDOG_TIMEOUT msecs_to_jiffies(250)
enum ssif_intf_state {
- SSIF_NORMAL,
+ SSIF_IDLE,
SSIF_GETTING_FLAGS,
SSIF_GETTING_EVENTS,
SSIF_CLEARING_FLAGS,
@@ -100,8 +100,8 @@ enum ssif_intf_state {
/* FIXME - add watchdog stuff. */
};
-#define SSIF_IDLE(ssif) ((ssif)->ssif_state == SSIF_NORMAL \
- && (ssif)->curr_msg == NULL)
+#define IS_SSIF_IDLE(ssif) ((ssif)->ssif_state == SSIF_IDLE \
+ && (ssif)->curr_msg == NULL)
/*
* Indexes into stats[] in ssif_info below.
@@ -348,9 +348,9 @@ static void return_hosed_msg(struct ssif
/*
* Must be called with the message lock held. This will release the
- * message lock. Note that the caller will check SSIF_IDLE and start a
- * new operation, so there is no need to check for new messages to
- * start in here.
+ * message lock. Note that the caller will check IS_SSIF_IDLE and
+ * start a new operation, so there is no need to check for new
+ * messages to start in here.
*/
static void start_clear_flags(struct ssif_info *ssif_info, unsigned long *flags)
{
@@ -367,7 +367,7 @@ static void start_clear_flags(struct ssi
if (start_send(ssif_info, msg, 3) != 0) {
/* Error, just go to normal state. */
- ssif_info->ssif_state = SSIF_NORMAL;
+ ssif_info->ssif_state = SSIF_IDLE;
}
}
@@ -382,7 +382,7 @@ static void start_flag_fetch(struct ssif
mb[0] = (IPMI_NETFN_APP_REQUEST << 2);
mb[1] = IPMI_GET_MSG_FLAGS_CMD;
if (start_send(ssif_info, mb, 2) != 0)
- ssif_info->ssif_state = SSIF_NORMAL;
+ ssif_info->ssif_state = SSIF_IDLE;
}
static void check_start_send(struct ssif_info *ssif_info, unsigned long *flags,
@@ -393,7 +393,7 @@ static void check_start_send(struct ssif
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
ssif_info->curr_msg = NULL;
- ssif_info->ssif_state = SSIF_NORMAL;
+ ssif_info->ssif_state = SSIF_IDLE;
ipmi_ssif_unlock_cond(ssif_info, flags);
ipmi_free_smi_msg(msg);
}
@@ -407,7 +407,7 @@ static void start_event_fetch(struct ssi
msg = ipmi_alloc_smi_msg();
if (!msg) {
- ssif_info->ssif_state = SSIF_NORMAL;
+ ssif_info->ssif_state = SSIF_IDLE;
ipmi_ssif_unlock_cond(ssif_info, flags);
return;
}
@@ -430,7 +430,7 @@ static void start_recv_msg_fetch(struct
msg = ipmi_alloc_smi_msg();
if (!msg) {
- ssif_info->ssif_state = SSIF_NORMAL;
+ ssif_info->ssif_state = SSIF_IDLE;
ipmi_ssif_unlock_cond(ssif_info, flags);
return;
}
@@ -448,9 +448,9 @@ static void start_recv_msg_fetch(struct
/*
* Must be called with the message lock held. This will release the
- * message lock. Note that the caller will check SSIF_IDLE and start a
- * new operation, so there is no need to check for new messages to
- * start in here.
+ * message lock. Note that the caller will check IS_SSIF_IDLE and
+ * start a new operation, so there is no need to check for new
+ * messages to start in here.
*/
static void handle_flags(struct ssif_info *ssif_info, unsigned long *flags)
{
@@ -466,7 +466,7 @@ static void handle_flags(struct ssif_inf
/* Events available. */
start_event_fetch(ssif_info, flags);
else {
- ssif_info->ssif_state = SSIF_NORMAL;
+ ssif_info->ssif_state = SSIF_IDLE;
ipmi_ssif_unlock_cond(ssif_info, flags);
}
}
@@ -568,7 +568,7 @@ static void watch_timeout(struct timer_l
if (ssif_info->watch_timeout) {
mod_timer(&ssif_info->watch_timer,
jiffies + ssif_info->watch_timeout);
- if (SSIF_IDLE(ssif_info)) {
+ if (IS_SSIF_IDLE(ssif_info)) {
start_flag_fetch(ssif_info, flags); /* Releases lock */
return;
}
@@ -756,7 +756,7 @@ static void msg_done_handler(struct ssif
}
switch (ssif_info->ssif_state) {
- case SSIF_NORMAL:
+ case SSIF_IDLE:
ipmi_ssif_unlock_cond(ssif_info, flags);
if (!msg)
break;
@@ -774,7 +774,7 @@ static void msg_done_handler(struct ssif
* Error fetching flags, or invalid length,
* just give up for now.
*/
- ssif_info->ssif_state = SSIF_NORMAL;
+ ssif_info->ssif_state = SSIF_IDLE;
ipmi_ssif_unlock_cond(ssif_info, flags);
dev_warn(&ssif_info->client->dev,
"Error getting flags: %d %d, %x\n",
@@ -809,7 +809,7 @@ static void msg_done_handler(struct ssif
"Invalid response clearing flags: %x %x\n",
data[0], data[1]);
}
- ssif_info->ssif_state = SSIF_NORMAL;
+ ssif_info->ssif_state = SSIF_IDLE;
ipmi_ssif_unlock_cond(ssif_info, flags);
break;
@@ -887,7 +887,7 @@ static void msg_done_handler(struct ssif
}
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
- if (SSIF_IDLE(ssif_info) && !ssif_info->stopping) {
+ if (IS_SSIF_IDLE(ssif_info) && !ssif_info->stopping) {
if (ssif_info->req_events)
start_event_fetch(ssif_info, flags);
else if (ssif_info->req_flags)
@@ -1032,7 +1032,7 @@ static void start_next_msg(struct ssif_i
unsigned long oflags;
restart:
- if (!SSIF_IDLE(ssif_info)) {
+ if (!IS_SSIF_IDLE(ssif_info)) {
ipmi_ssif_unlock_cond(ssif_info, flags);
return;
}
@@ -1255,7 +1255,7 @@ static void shutdown_ssif(void *send_inf
dev_set_drvdata(&ssif_info->client->dev, NULL);
/* make sure the driver is not looking for flags any more. */
- while (ssif_info->ssif_state != SSIF_NORMAL)
+ while (ssif_info->ssif_state != SSIF_IDLE)
schedule_timeout(1);
ssif_info->stopping = true;
@@ -1825,7 +1825,7 @@ static int ssif_probe(struct i2c_client
}
spin_lock_init(&ssif_info->lock);
- ssif_info->ssif_state = SSIF_NORMAL;
+ ssif_info->ssif_state = SSIF_IDLE;
timer_setup(&ssif_info->retry_timer, retry_timeout, 0);
timer_setup(&ssif_info->watch_timer, watch_timeout, 0);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 657/885] io_uring: Replace 0-length array with flexible array
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (655 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 656/885] ipmi_ssif: Rename idle state and check Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 658/885] io_uring: use user visible tail in io_uring_poll() Greg Kroah-Hartman
` (230 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jens Axboe, Pavel Begunkov,
Gustavo A. R. Silva, io-uring, Kees Cook
From: Kees Cook <keescook@chromium.org>
commit 36632d062975a9ff4410c90dd6d37922b68d0920 upstream.
Zero-length arrays are deprecated[1]. Replace struct io_uring_buf_ring's
"bufs" with a flexible array member. (How is the size of this array
verified?) Detected with GCC 13, using -fstrict-flex-arrays=3:
In function 'io_ring_buffer_select',
inlined from 'io_buffer_select' at io_uring/kbuf.c:183:10:
io_uring/kbuf.c:141:23: warning: array subscript 255 is outside the bounds of an interior zero-length array 'struct io_uring_buf[0]' [-Wzero-length-bounds]
141 | buf = &br->bufs[head];
| ^~~~~~~~~~~~~~~
In file included from include/linux/io_uring.h:7,
from io_uring/kbuf.c:10:
include/uapi/linux/io_uring.h: In function 'io_buffer_select':
include/uapi/linux/io_uring.h:628:41: note: while referencing 'bufs'
628 | struct io_uring_buf bufs[0];
| ^~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Fixes: c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: stable@vger.kernel.org
Cc: io-uring@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230105190507.gonna.131-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/uapi/linux/io_uring.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/uapi/linux/io_uring.h
+++ b/include/uapi/linux/io_uring.h
@@ -617,7 +617,7 @@ struct io_uring_buf_ring {
__u16 resv3;
__u16 tail;
};
- struct io_uring_buf bufs[0];
+ __DECLARE_FLEX_ARRAY(struct io_uring_buf, bufs);
};
};
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 658/885] io_uring: use user visible tail in io_uring_poll()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (656 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 657/885] io_uring: Replace 0-length array with flexible array Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 659/885] io_uring: handle TIF_NOTIFY_RESUME when checking for task_work Greg Kroah-Hartman
` (229 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Pavel Begunkov, Jens Axboe
From: Pavel Begunkov <asml.silence@gmail.com>
commit c10bb64684813a326174c3eebcafb3ee5af52ca3 upstream.
We return POLLIN from io_uring_poll() depending on whether there are
CQEs for the userspace, and so we should use the user visible tail
pointer instead of a transient cached value.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/228ffcbf30ba98856f66ffdb9a6a60ead1dd96c0.1674484266.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
io_uring/io_uring.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -2653,7 +2653,7 @@ static __poll_t io_uring_poll(struct fil
* pushs them to do the flush.
*/
- if (io_cqring_events(ctx) || io_has_work(ctx))
+ if (__io_cqring_events_user(ctx) || io_has_work(ctx))
mask |= EPOLLIN | EPOLLRDNORM;
return mask;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 659/885] io_uring: handle TIF_NOTIFY_RESUME when checking for task_work
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (657 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 658/885] io_uring: use user visible tail in io_uring_poll() Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 660/885] io_uring: add a conditional reschedule to the IOPOLL cancelation loop Greg Kroah-Hartman
` (228 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jens Axboe
From: Jens Axboe <axboe@kernel.dk>
commit b5d3ae202fbfe055aa2a8ae8524531ee1dcab717 upstream.
If TIF_NOTIFY_RESUME is set, then we need to call resume_user_mode_work()
for PF_IO_WORKER threads. They never return to usermode, hence never get
a chance to process any items that are marked by this flag. Most notably
this includes the final put of files, but also any throttling markers set
by block cgroups.
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
io_uring/io_uring.h | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/io_uring/io_uring.h
+++ b/io_uring/io_uring.h
@@ -3,6 +3,7 @@
#include <linux/errno.h>
#include <linux/lockdep.h>
+#include <linux/resume_user_mode.h>
#include <linux/io_uring_types.h>
#include <uapi/linux/eventpoll.h>
#include "io-wq.h"
@@ -255,6 +256,13 @@ static inline int io_run_task_work(void)
*/
if (test_thread_flag(TIF_NOTIFY_SIGNAL))
clear_notify_signal();
+ /*
+ * PF_IO_WORKER never returns to userspace, so check here if we have
+ * notify work that needs processing.
+ */
+ if (current->flags & PF_IO_WORKER &&
+ test_thread_flag(TIF_NOTIFY_RESUME))
+ resume_user_mode_work(NULL);
if (task_work_pending(current)) {
__set_current_state(TASK_RUNNING);
task_work_run();
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 660/885] io_uring: add a conditional reschedule to the IOPOLL cancelation loop
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (658 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 659/885] io_uring: handle TIF_NOTIFY_RESUME when checking for task_work Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 661/885] io_uring: add reschedule point to handle_tw_list() Greg Kroah-Hartman
` (227 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jens Axboe
From: Jens Axboe <axboe@kernel.dk>
commit fcc926bb857949dbfa51a7d95f3f5ebc657f198c upstream.
If the kernel is configured with CONFIG_PREEMPT_NONE, we could be
sitting in a tight loop reaping events but not giving them a chance to
finish. This results in a trace ala:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 2-...!: (5249 ticks this GP) idle=935c/1/0x4000000000000000 softirq=4265/4274 fqs=1
(t=5251 jiffies g=465 q=4135 ncpus=4)
rcu: rcu_sched kthread starved for 5249 jiffies! g465 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_sched state:R running task stack:0 pid:12 ppid:2 flags:0x00000008
Call trace:
__switch_to+0xb0/0xc8
__schedule+0x43c/0x520
schedule+0x4c/0x98
schedule_timeout+0xbc/0xdc
rcu_gp_fqs_loop+0x308/0x344
rcu_gp_kthread+0xd8/0xf0
kthread+0xb8/0xc8
ret_from_fork+0x10/0x20
rcu: Stack dump where RCU GP kthread last ran:
Task dump for CPU 0:
task:kworker/u8:10 state:R running task stack:0 pid:89 ppid:2 flags:0x0000000a
Workqueue: events_unbound io_ring_exit_work
Call trace:
__switch_to+0xb0/0xc8
0xffff0000c8fefd28
CPU: 2 PID: 95 Comm: kworker/u8:13 Not tainted 6.2.0-rc5-00042-g40316e337c80-dirty #2759
Hardware name: linux,dummy-virt (DT)
Workqueue: events_unbound io_ring_exit_work
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : io_do_iopoll+0x344/0x360
lr : io_do_iopoll+0xb8/0x360
sp : ffff800009bebc60
x29: ffff800009bebc60 x28: 0000000000000000 x27: 0000000000000000
x26: ffff0000c0f67d48 x25: ffff0000c0f67840 x24: ffff800008950024
x23: 0000000000000001 x22: 0000000000000000 x21: ffff0000c27d3200
x20: ffff0000c0f67840 x19: ffff0000c0f67800 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000001 x13: 0000000000000001 x12: 0000000000000000
x11: 0000000000000179 x10: 0000000000000870 x9 : ffff800009bebd60
x8 : ffff0000c27d3ad0 x7 : fefefefefefefeff x6 : 0000646e756f626e
x5 : ffff0000c0f67840 x4 : 0000000000000000 x3 : ffff0000c2398000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
io_do_iopoll+0x344/0x360
io_uring_try_cancel_requests+0x21c/0x334
io_ring_exit_work+0x90/0x40c
process_one_work+0x1a4/0x254
worker_thread+0x1ec/0x258
kthread+0xb8/0xc8
ret_from_fork+0x10/0x20
Add a cond_resched() in the cancelation IOPOLL loop to fix this.
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
io_uring/io_uring.c | 1 +
1 file changed, 1 insertion(+)
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -2912,6 +2912,7 @@ static __cold bool io_uring_try_cancel_r
while (!wq_list_empty(&ctx->iopoll_list)) {
io_iopoll_try_reap_events(ctx);
ret = true;
+ cond_resched();
}
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 661/885] io_uring: add reschedule point to handle_tw_list()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (659 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 660/885] io_uring: add a conditional reschedule to the IOPOLL cancelation loop Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 662/885] io_uring/rsrc: disallow multi-source reg buffers Greg Kroah-Hartman
` (226 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jens Axboe
From: Jens Axboe <axboe@kernel.dk>
commit f58680085478dd292435727210122960d38e8014 upstream.
If CONFIG_PREEMPT_NONE is set and the task_work chains are long, we
could be running into issues blocking others for too long. Add a
reschedule check in handle_tw_list(), and flush the ctx if we need to
reschedule.
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
io_uring/io_uring.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -1030,10 +1030,16 @@ static unsigned int handle_tw_list(struc
/* if not contended, grab and improve batching */
*locked = mutex_trylock(&(*ctx)->uring_lock);
percpu_ref_get(&(*ctx)->refs);
- }
+ } else if (!*locked)
+ *locked = mutex_trylock(&(*ctx)->uring_lock);
req->io_task_work.func(req, locked);
node = next;
count++;
+ if (unlikely(need_resched())) {
+ ctx_flush_and_put(*ctx, locked);
+ *ctx = NULL;
+ cond_resched();
+ }
}
return count;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 662/885] io_uring/rsrc: disallow multi-source reg buffers
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (660 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 661/885] io_uring: add reschedule point to handle_tw_list() Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 663/885] io_uring: remove MSG_NOSIGNAL from recvmsg Greg Kroah-Hartman
` (225 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Pavel Begunkov, Jens Axboe
From: Pavel Begunkov <asml.silence@gmail.com>
commit edd478269640b360c6f301f2baa04abdda563ef3 upstream.
If two or more mappings go back to back to each other they can be passed
into io_uring to be registered as a single registered buffer. That would
even work if mappings came from different sources, e.g. it's possible to
mix in this way anon pages and pages from shmem or hugetlb. That is not
a problem but it'd rather be less prone if we forbid such mixing.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
io_uring/rsrc.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/io_uring/rsrc.c
+++ b/io_uring/rsrc.c
@@ -1147,14 +1147,17 @@ struct page **io_pin_pages(unsigned long
pret = pin_user_pages(ubuf, nr_pages, FOLL_WRITE | FOLL_LONGTERM,
pages, vmas);
if (pret == nr_pages) {
+ struct file *file = vmas[0]->vm_file;
+
/* don't support file backed memory */
for (i = 0; i < nr_pages; i++) {
- struct vm_area_struct *vma = vmas[i];
-
- if (vma_is_shmem(vma))
+ if (vmas[i]->vm_file != file) {
+ ret = -EINVAL;
+ break;
+ }
+ if (!file)
continue;
- if (vma->vm_file &&
- !is_file_hugepages(vma->vm_file)) {
+ if (!vma_is_shmem(vmas[i]) && !is_file_hugepages(file)) {
ret = -EOPNOTSUPP;
break;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 663/885] io_uring: remove MSG_NOSIGNAL from recvmsg
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (661 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 662/885] io_uring/rsrc: disallow multi-source reg buffers Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 664/885] io_uring: fix fget leak when fs dont support nowait buffered read Greg Kroah-Hartman
` (224 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, David Lamparter, Eric Dumazet, Jens Axboe
From: David Lamparter <equinox@diac24.net>
commit 7605c43d67face310b4b87dee1a28bc0c8cd8c0f upstream.
MSG_NOSIGNAL is not applicable for the receiving side, SIGPIPE is
generated when trying to write to a "broken pipe". AF_PACKET's
packet_recvmsg() does enforce this, giving back EINVAL when MSG_NOSIGNAL
is set - making it unuseable in io_uring's recvmsg.
Remove MSG_NOSIGNAL from io_recvmsg_prep().
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: David Lamparter <equinox@diac24.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230224150123.128346-1-equinox@diac24.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
io_uring/net.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/io_uring/net.c
+++ b/io_uring/net.c
@@ -553,7 +553,7 @@ int io_recvmsg_prep(struct io_kiocb *req
sr->flags = READ_ONCE(sqe->ioprio);
if (sr->flags & ~(RECVMSG_FLAGS))
return -EINVAL;
- sr->msg_flags = READ_ONCE(sqe->msg_flags) | MSG_NOSIGNAL;
+ sr->msg_flags = READ_ONCE(sqe->msg_flags);
if (sr->msg_flags & MSG_DONTWAIT)
req->flags |= REQ_F_NOWAIT;
if (sr->msg_flags & MSG_ERRQUEUE)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 664/885] io_uring: fix fget leak when fs dont support nowait buffered read
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (662 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 663/885] io_uring: remove MSG_NOSIGNAL from recvmsg Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 665/885] s390/extmem: return correct segment type in __segment_load() Greg Kroah-Hartman
` (223 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Heming Zhao, Joseph Qi,
Xiaoguang Wang, Jens Axboe
From: Joseph Qi <joseph.qi@linux.alibaba.com>
commit 54aa7f2330b82884f4a1afce0220add6e8312f8b upstream.
Heming reported a BUG when using io_uring doing link-cp on ocfs2. [1]
Do the following steps can reproduce this BUG:
mount -t ocfs2 /dev/vdc /mnt/ocfs2
cp testfile /mnt/ocfs2/
./link-cp /mnt/ocfs2/testfile /mnt/ocfs2/testfile.1
umount /mnt/ocfs2
Then umount will fail, and it outputs:
umount: /mnt/ocfs2: target is busy.
While tracing umount, it blames mnt_get_count() not return as expected.
Do a deep investigation for fget()/fput() on related code flow, I've
finally found that fget() leaks since ocfs2 doesn't support nowait
buffered read.
io_issue_sqe
|-io_assign_file // do fget() first
|-io_read
|-io_iter_do_read
|-ocfs2_file_read_iter // return -EOPNOTSUPP
|-kiocb_done
|-io_rw_done
|-__io_complete_rw_common // set REQ_F_REISSUE
|-io_resubmit_prep
|-io_req_prep_async // override req->file, leak happens
This was introduced by commit a196c78b5443 in v5.18. Fix it by don't
re-assign req->file if it has already been assigned.
[1] https://lore.kernel.org/ocfs2-devel/ab580a75-91c8-d68a-3455-40361be1bfa8@linux.alibaba.com/T/#t
Fixes: a196c78b5443 ("io_uring: assign non-fixed early for async work")
Cc: <stable@vger.kernel.org>
Reported-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230228045459.13524-1-joseph.qi@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
io_uring/io_uring.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -1597,7 +1597,7 @@ int io_req_prep_async(struct io_kiocb *r
const struct io_op_def *def = &io_op_defs[req->opcode];
/* assign early for deferred execution for non-fixed file */
- if (def->needs_file && !(req->flags & REQ_F_FIXED_FILE))
+ if (def->needs_file && !(req->flags & REQ_F_FIXED_FILE) && !req->file)
req->file = io_file_get_normal(req, req->cqe.fd);
if (!def->prep_async)
return 0;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 665/885] s390/extmem: return correct segment type in __segment_load()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (663 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 664/885] io_uring: fix fget leak when fs dont support nowait buffered read Greg Kroah-Hartman
@ 2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 666/885] s390: discard .interp section Greg Kroah-Hartman
` (222 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 16:59 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Gerald Schaefer, Heiko Carstens
From: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
commit 8c42dd78df148c90e48efff204cce38743906a79 upstream.
Commit f05f62d04271f ("s390/vmem: get rid of memory segment list")
reshuffled the call to vmem_add_mapping() in __segment_load(), which now
overwrites rc after it was set to contain the segment type code.
As result, __segment_load() will now always return 0 on success, which
corresponds to the segment type code SEG_TYPE_SW, i.e. a writeable
segment. This results in a kernel crash when loading a read-only segment
as dcssblk block device, and trying to write to it.
Instead of reshuffling code again, make sure to return the segment type
on success, and also describe this rather delicate and unexpected logic
in the function comment. Also initialize new segtype variable with
invalid value, to prevent possible future confusion.
Fixes: f05f62d04271 ("s390/vmem: get rid of memory segment list")
Cc: <stable@vger.kernel.org> # 5.9+
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/mm/extmem.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/arch/s390/mm/extmem.c
+++ b/arch/s390/mm/extmem.c
@@ -289,15 +289,17 @@ segment_overlaps_others (struct dcss_seg
/*
* real segment loading function, called from segment_load
+ * Must return either an error code < 0, or the segment type code >= 0
*/
static int
__segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long *end)
{
unsigned long start_addr, end_addr, dummy;
struct dcss_segment *seg;
- int rc, diag_cc;
+ int rc, diag_cc, segtype;
start_addr = end_addr = 0;
+ segtype = -1;
seg = kmalloc(sizeof(*seg), GFP_KERNEL | GFP_DMA);
if (seg == NULL) {
rc = -ENOMEM;
@@ -326,9 +328,9 @@ __segment_load (char *name, int do_nonsh
seg->res_name[8] = '\0';
strlcat(seg->res_name, " (DCSS)", sizeof(seg->res_name));
seg->res->name = seg->res_name;
- rc = seg->vm_segtype;
- if (rc == SEG_TYPE_SC ||
- ((rc == SEG_TYPE_SR || rc == SEG_TYPE_ER) && !do_nonshared))
+ segtype = seg->vm_segtype;
+ if (segtype == SEG_TYPE_SC ||
+ ((segtype == SEG_TYPE_SR || segtype == SEG_TYPE_ER) && !do_nonshared))
seg->res->flags |= IORESOURCE_READONLY;
/* Check for overlapping resources before adding the mapping. */
@@ -386,7 +388,7 @@ __segment_load (char *name, int do_nonsh
out_free:
kfree(seg);
out:
- return rc;
+ return rc < 0 ? rc : segtype;
}
/*
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 666/885] s390: discard .interp section
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (664 preceding siblings ...)
2023-03-07 16:59 ` [PATCH 6.1 665/885] s390/extmem: return correct segment type in __segment_load() Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 667/885] s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler Greg Kroah-Hartman
` (221 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Ilya Leoshkevich, Heiko Carstens
From: Ilya Leoshkevich <iii@linux.ibm.com>
commit e9c9cb90e76ffaabcc7ca8f275d9e82195fd6367 upstream.
When debugging vmlinux with QEMU + GDB, the following GDB error may
occur:
(gdb) c
Continuing.
Warning:
Cannot insert breakpoint -1.
Cannot access memory at address 0xffffffffffff95c0
Command aborted.
(gdb)
The reason is that, when .interp section is present, GDB tries to
locate the file specified in it in memory and put a number of
breakpoints there (see enable_break() function in gdb/solib-svr4.c).
Sometimes GDB finds a bogus location that matches its heuristics,
fails to set a breakpoint and stops. This makes further debugging
impossible.
The .interp section contains misleading information anyway (vmlinux
does not need ld.so), so fix by discarding it.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kernel/vmlinux.lds.S | 1 +
1 file changed, 1 insertion(+)
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -228,5 +228,6 @@ SECTIONS
DISCARDS
/DISCARD/ : {
*(.eh_frame)
+ *(.interp)
}
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 667/885] s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (665 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 666/885] s390: discard .interp section Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 668/885] s390/kprobes: fix current_kprobe never cleared after kprobes reenter Greg Kroah-Hartman
` (220 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Heiko Carstens, Vasily Gorbik
From: Vasily Gorbik <gor@linux.ibm.com>
commit 42e19e6f04984088b6f9f0507c4c89a8152d9730 upstream.
Recent test_kprobe_missed kprobes kunit test uncovers the following error
(reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled):
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by kunit_try_catch/662.
irq event stamp: 280
hardirqs last enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0
hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318
softirqs last enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G N 6.2.0-173644-g44c18d77f0c0 #2
Hardware name: IBM 3931 A01 704 (LPAR)
Call Trace:
[<00000003e60a3a00>] dump_stack_lvl+0x120/0x198
[<00000003e3d02e82>] __might_resched+0x60a/0x668
[<00000003e60b9908>] __mutex_lock+0xc0/0x14e0
[<00000003e60bad5a>] mutex_lock_nested+0x32/0x40
[<00000003e3f7b460>] unregister_kprobe+0x30/0xd8
[<00000003e51b2602>] test_kprobe_missed+0xf2/0x268
[<00000003e51b5406>] kunit_try_run_case+0x10e/0x290
[<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8
[<00000003e3ce30f8>] kthread+0x2d0/0x398
[<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8
[<00000003e60ccada>] ret_from_fork+0xa/0x40
The reason for this error report is that kprobes handling code failed
to restore irqs.
The problem is that when kprobe is triggered from another kprobe
post_handler current sequence of enable_singlestep / disable_singlestep
is the following:
enable_singlestep <- original kprobe (saves kprobe_saved_imask)
enable_singlestep <- kprobe triggered from post_handler (clobbers kprobe_saved_imask)
disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask)
disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask)
There is just one kprobe_ctlblk per cpu and both calls saves and
loads irq mask to kprobe_saved_imask. To fix the problem simply move
resume_execution (which calls disable_singlestep) before calling
post_handler. This also fixes the problem that post_handler is called
with pt_regs which were not yet adjusted after single-stepping.
Cc: stable@vger.kernel.org
Fixes: 4ba069b802c2 ("[S390] add kprobes support.")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kernel/kprobes.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -433,12 +433,11 @@ static int post_kprobe_handler(struct pt
if (!p)
return 0;
+ resume_execution(p, regs);
if (kcb->kprobe_status != KPROBE_REENTER && p->post_handler) {
kcb->kprobe_status = KPROBE_HIT_SSDONE;
p->post_handler(p, regs, 0);
}
-
- resume_execution(p, regs);
pop_kprobe(kcb);
preempt_enable_no_resched();
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 668/885] s390/kprobes: fix current_kprobe never cleared after kprobes reenter
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (666 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 667/885] s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 669/885] KVM: s390: disable migration mode when dirty tracking is disabled Greg Kroah-Hartman
` (219 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Heiko Carstens, Vasily Gorbik
From: Vasily Gorbik <gor@linux.ibm.com>
commit cd57953936f2213dfaccce10d20f396956222c7d upstream.
Recent test_kprobe_missed kprobes kunit test uncovers the following
problem. Once kprobe is triggered from another kprobe (kprobe reenter),
all future kprobes on this cpu are considered as kprobe reenter, thus
pre_handler and post_handler are not being called and kprobes are counted
as "missed".
Commit b9599798f953 ("[S390] kprobes: activation and deactivation")
introduced a simpler scheme for kprobes (de)activation and status
tracking by using push_kprobe/pop_kprobe, which supposed to work for
both initial kprobe entry as well as kprobe reentry and helps to avoid
handling those two cases differently. The problem is that a sequence of
calls in case of kprobes reenter:
push_kprobe() <- NULL (current_kprobe)
push_kprobe() <- kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
leaves "kprobe1" as "current_kprobe" on this cpu, instead of setting it
to NULL. In fact push_kprobe/pop_kprobe can only store a single state
(there is just one prev_kprobe in kprobe_ctlblk). Which is a hack but
sufficient, there is no need to have another prev_kprobe just to store
NULL. To make a simple and backportable fix simply reset "prev_kprobe"
when kprobe is poped from this "stack". No need to worry about
"kprobe_status" in this case, because its value is only checked when
current_kprobe != NULL.
Cc: stable@vger.kernel.org
Fixes: b9599798f953 ("[S390] kprobes: activation and deactivation")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kernel/kprobes.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -279,6 +279,7 @@ static void pop_kprobe(struct kprobe_ctl
{
__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
kcb->kprobe_status = kcb->prev_kprobe.status;
+ kcb->prev_kprobe.kp = NULL;
}
NOKPROBE_SYMBOL(pop_kprobe);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 669/885] KVM: s390: disable migration mode when dirty tracking is disabled
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (667 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 668/885] s390/kprobes: fix current_kprobe never cleared after kprobes reenter Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 670/885] cifs: Fix uninitialized memory read in smb3_qfs_tcon() Greg Kroah-Hartman
` (218 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Nico Boehr, Janosch Frank, Claudio Imbrenda
From: Nico Boehr <nrb@linux.ibm.com>
commit f2d3155e2a6bac44d16f04415a321e8707d895c6 upstream.
Migration mode is a VM attribute which enables tracking of changes in
storage attributes (PGSTE). It assumes dirty tracking is enabled on all
memslots to keep a dirty bitmap of pages with changed storage attributes.
When enabling migration mode, we currently check that dirty tracking is
enabled for all memslots. However, userspace can disable dirty tracking
without disabling migration mode.
Since migration mode is pointless with dirty tracking disabled, disable
migration mode whenever userspace disables dirty tracking on any slot.
Also update the documentation to clarify that dirty tracking must be
enabled when enabling migration mode, which is already enforced by the
code in kvm_s390_vm_start_migration().
Also highlight in the documentation for KVM_S390_GET_CMMA_BITS that it
can now fail with -EINVAL when dirty tracking is disabled while
migration mode is on. Move all the error codes to a table so this stays
readable.
To disable migration mode, slots_lock should be held, which is taken
in kvm_set_memory_region() and thus held in
kvm_arch_prepare_memory_region().
Restructure the prepare code a bit so all the sanity checking is done
before disabling migration mode. This ensures migration mode isn't
disabled when some sanity check fails.
Cc: stable@vger.kernel.org
Fixes: 190df4a212a7 ("KVM: s390: CMMA tracking, ESSA emulation, migration mode")
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20230127140532.230651-2-nrb@linux.ibm.com
Message-Id: <20230127140532.230651-2-nrb@linux.ibm.com>
[frankja@linux.ibm.com: fixed commit message typo, moved api.rst error table upwards]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/virt/kvm/api.rst | 18 ++++++++-----
Documentation/virt/kvm/devices/vm.rst | 4 ++
arch/s390/kvm/kvm-s390.c | 47 +++++++++++++++++++++++-----------
3 files changed, 48 insertions(+), 21 deletions(-)
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -4483,6 +4483,18 @@ not holding a previously reported uncorr
:Parameters: struct kvm_s390_cmma_log (in, out)
:Returns: 0 on success, a negative value on error
+Errors:
+
+ ====== =============================================================
+ ENOMEM not enough memory can be allocated to complete the task
+ ENXIO if CMMA is not enabled
+ EINVAL if KVM_S390_CMMA_PEEK is not set but migration mode was not enabled
+ EINVAL if KVM_S390_CMMA_PEEK is not set but dirty tracking has been
+ disabled (and thus migration mode was automatically disabled)
+ EFAULT if the userspace address is invalid or if no page table is
+ present for the addresses (e.g. when using hugepages).
+ ====== =============================================================
+
This ioctl is used to get the values of the CMMA bits on the s390
architecture. It is meant to be used in two scenarios:
@@ -4563,12 +4575,6 @@ mask is unused.
values points to the userspace buffer where the result will be stored.
-This ioctl can fail with -ENOMEM if not enough memory can be allocated to
-complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if
-KVM_S390_CMMA_PEEK is not set but migration mode was not enabled, with
--EFAULT if the userspace address is invalid or if no page table is
-present for the addresses (e.g. when using hugepages).
-
4.108 KVM_S390_SET_CMMA_BITS
----------------------------
--- a/Documentation/virt/kvm/devices/vm.rst
+++ b/Documentation/virt/kvm/devices/vm.rst
@@ -302,6 +302,10 @@ Allows userspace to start migration mode
Setting this attribute when migration mode is already active will have
no effects.
+Dirty tracking must be enabled on all memslots, else -EINVAL is returned. When
+dirty tracking is disabled on any memslot, migration mode is automatically
+stopped.
+
:Parameters: none
:Returns: -ENOMEM if there is not enough free memory to start migration mode;
-EINVAL if the state of the VM is invalid (e.g. no memory defined);
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -5579,23 +5579,40 @@ int kvm_arch_prepare_memory_region(struc
if (kvm_s390_pv_get_handle(kvm))
return -EINVAL;
- if (change == KVM_MR_DELETE || change == KVM_MR_FLAGS_ONLY)
- return 0;
-
- /* A few sanity checks. We can have memory slots which have to be
- located/ended at a segment boundary (1MB). The memory in userland is
- ok to be fragmented into various different vmas. It is okay to mmap()
- and munmap() stuff in this slot after doing this call at any time */
-
- if (new->userspace_addr & 0xffffful)
- return -EINVAL;
+ if (change != KVM_MR_DELETE && change != KVM_MR_FLAGS_ONLY) {
+ /*
+ * A few sanity checks. We can have memory slots which have to be
+ * located/ended at a segment boundary (1MB). The memory in userland is
+ * ok to be fragmented into various different vmas. It is okay to mmap()
+ * and munmap() stuff in this slot after doing this call at any time
+ */
+
+ if (new->userspace_addr & 0xffffful)
+ return -EINVAL;
+
+ size = new->npages * PAGE_SIZE;
+ if (size & 0xffffful)
+ return -EINVAL;
+
+ if ((new->base_gfn * PAGE_SIZE) + size > kvm->arch.mem_limit)
+ return -EINVAL;
+ }
- size = new->npages * PAGE_SIZE;
- if (size & 0xffffful)
- return -EINVAL;
+ if (!kvm->arch.migration_mode)
+ return 0;
- if ((new->base_gfn * PAGE_SIZE) + size > kvm->arch.mem_limit)
- return -EINVAL;
+ /*
+ * Turn off migration mode when:
+ * - userspace creates a new memslot with dirty logging off,
+ * - userspace modifies an existing memslot (MOVE or FLAGS_ONLY) and
+ * dirty logging is turned off.
+ * Migration mode expects dirty page logging being enabled to store
+ * its dirty bitmap.
+ */
+ if (change != KVM_MR_DELETE &&
+ !(new->flags & KVM_MEM_LOG_DIRTY_PAGES))
+ WARN(kvm_s390_vm_stop_migration(kvm),
+ "Failed to stop migration mode");
return 0;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 670/885] cifs: Fix uninitialized memory read in smb3_qfs_tcon()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (668 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 669/885] KVM: s390: disable migration mode when dirty tracking is disabled Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 671/885] cifs: Fix uninitialized memory reads for oparms.mode Greg Kroah-Hartman
` (217 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Volker Lendecke,
Paulo Alcantara (SUSE),
Steve French
From: Volker Lendecke <vl@samba.org>
commit d447e794a37288ec7a080aa1b044a8d9deebbab7 upstream.
oparms was not fully initialized
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/smb2ops.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -729,12 +729,13 @@ smb3_qfs_tcon(const unsigned int xid, st
struct cifs_fid fid;
struct cached_fid *cfid = NULL;
- oparms.tcon = tcon;
- oparms.desired_access = FILE_READ_ATTRIBUTES;
- oparms.disposition = FILE_OPEN;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = FILE_READ_ATTRIBUTES,
+ .disposition = FILE_OPEN,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .fid = &fid,
+ };
rc = open_cached_dir(xid, tcon, "", cifs_sb, false, &cfid);
if (rc == 0)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 671/885] cifs: Fix uninitialized memory reads for oparms.mode
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (669 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 670/885] cifs: Fix uninitialized memory read in smb3_qfs_tcon() Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 672/885] cifs: fix mount on old smb servers Greg Kroah-Hartman
` (216 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Volker Lendecke, Steve French
From: Volker Lendecke <vl@samba.org>
commit de036dcaca65cf94bf7ff09c571c077f02bc92b4 upstream.
Use a struct assignment with implicit member initialization
Signed-off-by: Volker Lendecke <vl@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/cached_dir.c | 13 +--
fs/cifs/cifsacl.c | 34 ++++-----
fs/cifs/cifssmb.c | 17 ++--
fs/cifs/dir.c | 19 ++---
fs/cifs/file.c | 35 +++++----
fs/cifs/inode.c | 53 +++++++-------
fs/cifs/link.c | 66 +++++++++--------
fs/cifs/smb1ops.c | 72 ++++++++++---------
fs/cifs/smb2inode.c | 17 ++--
fs/cifs/smb2ops.c | 191 ++++++++++++++++++++++++++-------------------------
10 files changed, 274 insertions(+), 243 deletions(-)
--- a/fs/cifs/cached_dir.c
+++ b/fs/cifs/cached_dir.c
@@ -181,12 +181,13 @@ int open_cached_dir(unsigned int xid, st
rqst[0].rq_iov = open_iov;
rqst[0].rq_nvec = SMB2_CREATE_IOV_SIZE;
- oparms.tcon = tcon;
- oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_FILE);
- oparms.desired_access = FILE_READ_ATTRIBUTES;
- oparms.disposition = FILE_OPEN;
- oparms.fid = pfid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .create_options = cifs_create_options(cifs_sb, CREATE_NOT_FILE),
+ .desired_access = FILE_READ_ATTRIBUTES,
+ .disposition = FILE_OPEN,
+ .fid = pfid,
+ };
rc = SMB2_open_init(tcon, server,
&rqst[0], &oplock, &oparms, utf16_path);
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -1423,14 +1423,15 @@ static struct cifs_ntsd *get_cifs_acl_by
tcon = tlink_tcon(tlink);
xid = get_xid();
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = READ_CONTROL;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.disposition = FILE_OPEN;
- oparms.path = path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = READ_CONTROL,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .disposition = FILE_OPEN,
+ .path = path,
+ .fid = &fid,
+ };
rc = CIFS_open(xid, &oparms, &oplock, NULL);
if (!rc) {
@@ -1489,14 +1490,15 @@ int set_cifs_acl(struct cifs_ntsd *pnnts
else
access_flags = WRITE_DAC;
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = access_flags;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.disposition = FILE_OPEN;
- oparms.path = path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = access_flags,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .disposition = FILE_OPEN,
+ .path = path,
+ .fid = &fid,
+ };
rc = CIFS_open(xid, &oparms, &oplock, NULL);
if (rc) {
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -5314,14 +5314,15 @@ CIFSSMBSetPathInfoFB(const unsigned int
struct cifs_fid fid;
int rc;
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = GENERIC_WRITE;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.disposition = FILE_OPEN;
- oparms.path = fileName;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = GENERIC_WRITE,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .disposition = FILE_OPEN,
+ .path = fileName,
+ .fid = &fid,
+ };
rc = CIFS_open(xid, &oparms, &oplock, NULL);
if (rc)
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -295,15 +295,16 @@ static int cifs_do_create(struct inode *
if (!tcon->unix_ext && (mode & S_IWUGO) == 0)
create_options |= CREATE_OPTION_READONLY;
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = desired_access;
- oparms.create_options = cifs_create_options(cifs_sb, create_options);
- oparms.disposition = disposition;
- oparms.path = full_path;
- oparms.fid = fid;
- oparms.reconnect = false;
- oparms.mode = mode;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = desired_access,
+ .create_options = cifs_create_options(cifs_sb, create_options),
+ .disposition = disposition,
+ .path = full_path,
+ .fid = fid,
+ .mode = mode,
+ };
rc = server->ops->open(xid, &oparms, oplock, buf);
if (rc) {
cifs_dbg(FYI, "cifs_create returned 0x%x\n", rc);
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -260,14 +260,15 @@ static int cifs_nt_open(const char *full
if (f_flags & O_DIRECT)
create_options |= CREATE_NO_BUFFER;
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = desired_access;
- oparms.create_options = cifs_create_options(cifs_sb, create_options);
- oparms.disposition = disposition;
- oparms.path = full_path;
- oparms.fid = fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = desired_access,
+ .create_options = cifs_create_options(cifs_sb, create_options),
+ .disposition = disposition,
+ .path = full_path,
+ .fid = fid,
+ };
rc = server->ops->open(xid, &oparms, oplock, buf);
if (rc)
@@ -848,14 +849,16 @@ cifs_reopen_file(struct cifsFileInfo *cf
if (server->ops->get_lease_key)
server->ops->get_lease_key(inode, &cfile->fid);
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = desired_access;
- oparms.create_options = cifs_create_options(cifs_sb, create_options);
- oparms.disposition = disposition;
- oparms.path = full_path;
- oparms.fid = &cfile->fid;
- oparms.reconnect = true;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = desired_access,
+ .create_options = cifs_create_options(cifs_sb, create_options),
+ .disposition = disposition,
+ .path = full_path,
+ .fid = &cfile->fid,
+ .reconnect = true,
+ };
/*
* Can not refresh inode by passing in file_info buf to be returned by
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -508,14 +508,15 @@ cifs_sfu_type(struct cifs_fattr *fattr,
return PTR_ERR(tlink);
tcon = tlink_tcon(tlink);
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = GENERIC_READ;
- oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
- oparms.disposition = FILE_OPEN;
- oparms.path = path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = GENERIC_READ,
+ .create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR),
+ .disposition = FILE_OPEN,
+ .path = path,
+ .fid = &fid,
+ };
if (tcon->ses->server->oplocks)
oplock = REQ_OPLOCK;
@@ -1513,14 +1514,15 @@ cifs_rename_pending_delete(const char *f
goto out;
}
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = DELETE | FILE_WRITE_ATTRIBUTES;
- oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
- oparms.disposition = FILE_OPEN;
- oparms.path = full_path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = DELETE | FILE_WRITE_ATTRIBUTES,
+ .create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR),
+ .disposition = FILE_OPEN,
+ .path = full_path,
+ .fid = &fid,
+ };
rc = CIFS_open(xid, &oparms, &oplock, NULL);
if (rc != 0)
@@ -2107,15 +2109,16 @@ cifs_do_rename(const unsigned int xid, s
if (to_dentry->d_parent != from_dentry->d_parent)
goto do_rename_exit;
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- /* open the file to be renamed -- we need DELETE perms */
- oparms.desired_access = DELETE;
- oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
- oparms.disposition = FILE_OPEN;
- oparms.path = from_path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ /* open the file to be renamed -- we need DELETE perms */
+ .desired_access = DELETE,
+ .create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR),
+ .disposition = FILE_OPEN,
+ .path = from_path,
+ .fid = &fid,
+ };
rc = CIFS_open(xid, &oparms, &oplock, NULL);
if (rc == 0) {
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -271,14 +271,15 @@ cifs_query_mf_symlink(unsigned int xid,
int buf_type = CIFS_NO_BUFFER;
FILE_ALL_INFO file_info;
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = GENERIC_READ;
- oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
- oparms.disposition = FILE_OPEN;
- oparms.path = path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = GENERIC_READ,
+ .create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR),
+ .disposition = FILE_OPEN,
+ .path = path,
+ .fid = &fid,
+ };
rc = CIFS_open(xid, &oparms, &oplock, &file_info);
if (rc)
@@ -313,14 +314,15 @@ cifs_create_mf_symlink(unsigned int xid,
struct cifs_open_parms oparms;
struct cifs_io_parms io_parms = {0};
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = GENERIC_WRITE;
- oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
- oparms.disposition = FILE_CREATE;
- oparms.path = path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = GENERIC_WRITE,
+ .create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR),
+ .disposition = FILE_CREATE,
+ .path = path,
+ .fid = &fid,
+ };
rc = CIFS_open(xid, &oparms, &oplock, NULL);
if (rc)
@@ -355,13 +357,14 @@ smb3_query_mf_symlink(unsigned int xid,
__u8 oplock = SMB2_OPLOCK_LEVEL_NONE;
struct smb2_file_all_info *pfile_info = NULL;
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = GENERIC_READ;
- oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
- oparms.disposition = FILE_OPEN;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = GENERIC_READ,
+ .create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR),
+ .disposition = FILE_OPEN,
+ .fid = &fid,
+ };
utf16_path = cifs_convert_path_to_utf16(path, cifs_sb);
if (utf16_path == NULL)
@@ -421,14 +424,15 @@ smb3_create_mf_symlink(unsigned int xid,
if (!utf16_path)
return -ENOMEM;
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = GENERIC_WRITE;
- oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
- oparms.disposition = FILE_CREATE;
- oparms.fid = &fid;
- oparms.reconnect = false;
- oparms.mode = 0644;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = GENERIC_WRITE,
+ .create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR),
+ .disposition = FILE_CREATE,
+ .fid = &fid,
+ .mode = 0644,
+ };
rc = SMB2_open(xid, &oparms, utf16_path, &oplock, NULL, NULL,
NULL, NULL);
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -576,14 +576,15 @@ static int cifs_query_path_info(const un
if (!(le32_to_cpu(fi.Attributes) & ATTR_REPARSE))
return 0;
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = FILE_READ_ATTRIBUTES;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.disposition = FILE_OPEN;
- oparms.path = full_path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = FILE_READ_ATTRIBUTES,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .disposition = FILE_OPEN,
+ .path = full_path,
+ .fid = &fid,
+ };
/* Need to check if this is a symbolic link or not */
tmprc = CIFS_open(xid, &oparms, &oplock, NULL);
@@ -823,14 +824,15 @@ smb_set_file_info(struct inode *inode, c
goto out;
}
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = SYNCHRONIZE | FILE_WRITE_ATTRIBUTES;
- oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
- oparms.disposition = FILE_OPEN;
- oparms.path = full_path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = SYNCHRONIZE | FILE_WRITE_ATTRIBUTES,
+ .create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR),
+ .disposition = FILE_OPEN,
+ .path = full_path,
+ .fid = &fid,
+ };
cifs_dbg(FYI, "calling SetFileInfo since SetPathInfo for times not supported by this server\n");
rc = CIFS_open(xid, &oparms, &oplock, NULL);
@@ -998,15 +1000,16 @@ cifs_query_symlink(const unsigned int xi
goto out;
}
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = FILE_READ_ATTRIBUTES;
- oparms.create_options = cifs_create_options(cifs_sb,
- OPEN_REPARSE_POINT);
- oparms.disposition = FILE_OPEN;
- oparms.path = full_path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = FILE_READ_ATTRIBUTES,
+ .create_options = cifs_create_options(cifs_sb,
+ OPEN_REPARSE_POINT),
+ .disposition = FILE_OPEN,
+ .path = full_path,
+ .fid = &fid,
+ };
rc = CIFS_open(xid, &oparms, &oplock, NULL);
if (rc)
@@ -1115,15 +1118,16 @@ cifs_make_node(unsigned int xid, struct
cifs_dbg(FYI, "sfu compat create special file\n");
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = GENERIC_WRITE;
- oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR |
- CREATE_OPTION_SPECIAL);
- oparms.disposition = FILE_CREATE;
- oparms.path = full_path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = GENERIC_WRITE,
+ .create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR |
+ CREATE_OPTION_SPECIAL),
+ .disposition = FILE_CREATE,
+ .path = full_path,
+ .fid = &fid,
+ };
if (tcon->ses->server->oplocks)
oplock = REQ_OPLOCK;
--- a/fs/cifs/smb2inode.c
+++ b/fs/cifs/smb2inode.c
@@ -104,14 +104,15 @@ static int smb2_compound_op(const unsign
goto finished;
}
- vars->oparms.tcon = tcon;
- vars->oparms.desired_access = desired_access;
- vars->oparms.disposition = create_disposition;
- vars->oparms.create_options = cifs_create_options(cifs_sb, create_options);
- vars->oparms.fid = &fid;
- vars->oparms.reconnect = false;
- vars->oparms.mode = mode;
- vars->oparms.cifs_sb = cifs_sb;
+ vars->oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = desired_access,
+ .disposition = create_disposition,
+ .create_options = cifs_create_options(cifs_sb, create_options),
+ .fid = &fid,
+ .mode = mode,
+ .cifs_sb = cifs_sb,
+ };
rqst[num_rqst].rq_iov = &vars->open_iov[0];
rqst[num_rqst].rq_nvec = SMB2_CREATE_IOV_SIZE;
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -772,12 +772,13 @@ smb2_qfs_tcon(const unsigned int xid, st
struct cifs_open_parms oparms;
struct cifs_fid fid;
- oparms.tcon = tcon;
- oparms.desired_access = FILE_READ_ATTRIBUTES;
- oparms.disposition = FILE_OPEN;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = FILE_READ_ATTRIBUTES,
+ .disposition = FILE_OPEN,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .fid = &fid,
+ };
rc = SMB2_open(xid, &oparms, &srch_path, &oplock, NULL, NULL,
NULL, NULL);
@@ -817,12 +818,13 @@ smb2_is_path_accessible(const unsigned i
if (!utf16_path)
return -ENOMEM;
- oparms.tcon = tcon;
- oparms.desired_access = FILE_READ_ATTRIBUTES;
- oparms.disposition = FILE_OPEN;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = FILE_READ_ATTRIBUTES,
+ .disposition = FILE_OPEN,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .fid = &fid,
+ };
rc = SMB2_open(xid, &oparms, utf16_path, &oplock, NULL, NULL,
&err_iov, &err_buftype);
@@ -1098,13 +1100,13 @@ smb2_set_ea(const unsigned int xid, stru
rqst[0].rq_iov = open_iov;
rqst[0].rq_nvec = SMB2_CREATE_IOV_SIZE;
- memset(&oparms, 0, sizeof(oparms));
- oparms.tcon = tcon;
- oparms.desired_access = FILE_WRITE_EA;
- oparms.disposition = FILE_OPEN;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = FILE_WRITE_EA,
+ .disposition = FILE_OPEN,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .fid = &fid,
+ };
rc = SMB2_open_init(tcon, server,
&rqst[0], &oplock, &oparms, utf16_path);
@@ -1454,12 +1456,12 @@ smb2_ioctl_query_info(const unsigned int
rqst[0].rq_iov = &vars->open_iov[0];
rqst[0].rq_nvec = SMB2_CREATE_IOV_SIZE;
- memset(&oparms, 0, sizeof(oparms));
- oparms.tcon = tcon;
- oparms.disposition = FILE_OPEN;
- oparms.create_options = cifs_create_options(cifs_sb, create_options);
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .disposition = FILE_OPEN,
+ .create_options = cifs_create_options(cifs_sb, create_options),
+ .fid = &fid,
+ };
if (qi.flags & PASSTHRU_FSCTL) {
switch (qi.info_type & FSCTL_DEVICE_ACCESS_MASK) {
@@ -2089,12 +2091,13 @@ smb3_notify(const unsigned int xid, stru
}
tcon = cifs_sb_master_tcon(cifs_sb);
- oparms.tcon = tcon;
- oparms.desired_access = FILE_READ_ATTRIBUTES | FILE_READ_DATA;
- oparms.disposition = FILE_OPEN;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = FILE_READ_ATTRIBUTES | FILE_READ_DATA,
+ .disposition = FILE_OPEN,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .fid = &fid,
+ };
rc = SMB2_open(xid, &oparms, utf16_path, &oplock, NULL, NULL, NULL,
NULL);
@@ -2160,12 +2163,13 @@ smb2_query_dir_first(const unsigned int
rqst[0].rq_iov = open_iov;
rqst[0].rq_nvec = SMB2_CREATE_IOV_SIZE;
- oparms.tcon = tcon;
- oparms.desired_access = FILE_READ_ATTRIBUTES | FILE_READ_DATA;
- oparms.disposition = FILE_OPEN;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.fid = fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = FILE_READ_ATTRIBUTES | FILE_READ_DATA,
+ .disposition = FILE_OPEN,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .fid = fid,
+ };
rc = SMB2_open_init(tcon, server,
&rqst[0], &oplock, &oparms, utf16_path);
@@ -2491,12 +2495,13 @@ smb2_query_info_compound(const unsigned
rqst[0].rq_iov = open_iov;
rqst[0].rq_nvec = SMB2_CREATE_IOV_SIZE;
- oparms.tcon = tcon;
- oparms.desired_access = desired_access;
- oparms.disposition = FILE_OPEN;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = desired_access,
+ .disposition = FILE_OPEN,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .fid = &fid,
+ };
rc = SMB2_open_init(tcon, server,
&rqst[0], &oplock, &oparms, utf16_path);
@@ -2624,12 +2629,13 @@ smb311_queryfs(const unsigned int xid, s
if (!tcon->posix_extensions)
return smb2_queryfs(xid, tcon, cifs_sb, buf);
- oparms.tcon = tcon;
- oparms.desired_access = FILE_READ_ATTRIBUTES;
- oparms.disposition = FILE_OPEN;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = FILE_READ_ATTRIBUTES,
+ .disposition = FILE_OPEN,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .fid = &fid,
+ };
rc = SMB2_open(xid, &oparms, &srch_path, &oplock, NULL, NULL,
NULL, NULL);
@@ -2917,13 +2923,13 @@ smb2_query_symlink(const unsigned int xi
rqst[0].rq_iov = open_iov;
rqst[0].rq_nvec = SMB2_CREATE_IOV_SIZE;
- memset(&oparms, 0, sizeof(oparms));
- oparms.tcon = tcon;
- oparms.desired_access = FILE_READ_ATTRIBUTES;
- oparms.disposition = FILE_OPEN;
- oparms.create_options = cifs_create_options(cifs_sb, create_options);
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = FILE_READ_ATTRIBUTES,
+ .disposition = FILE_OPEN,
+ .create_options = cifs_create_options(cifs_sb, create_options),
+ .fid = &fid,
+ };
rc = SMB2_open_init(tcon, server,
&rqst[0], &oplock, &oparms, utf16_path);
@@ -3057,13 +3063,13 @@ smb2_query_reparse_tag(const unsigned in
rqst[0].rq_iov = open_iov;
rqst[0].rq_nvec = SMB2_CREATE_IOV_SIZE;
- memset(&oparms, 0, sizeof(oparms));
- oparms.tcon = tcon;
- oparms.desired_access = FILE_READ_ATTRIBUTES;
- oparms.disposition = FILE_OPEN;
- oparms.create_options = cifs_create_options(cifs_sb, OPEN_REPARSE_POINT);
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = FILE_READ_ATTRIBUTES,
+ .disposition = FILE_OPEN,
+ .create_options = cifs_create_options(cifs_sb, OPEN_REPARSE_POINT),
+ .fid = &fid,
+ };
rc = SMB2_open_init(tcon, server,
&rqst[0], &oplock, &oparms, utf16_path);
@@ -3197,17 +3203,20 @@ get_smb2_acl_by_path(struct cifs_sb_info
return ERR_PTR(rc);
}
- oparms.tcon = tcon;
- oparms.desired_access = READ_CONTROL;
- oparms.disposition = FILE_OPEN;
- /*
- * When querying an ACL, even if the file is a symlink we want to open
- * the source not the target, and so the protocol requires that the
- * client specify this flag when opening a reparse point
- */
- oparms.create_options = cifs_create_options(cifs_sb, 0) | OPEN_REPARSE_POINT;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = READ_CONTROL,
+ .disposition = FILE_OPEN,
+ /*
+ * When querying an ACL, even if the file is a symlink
+ * we want to open the source not the target, and so
+ * the protocol requires that the client specify this
+ * flag when opening a reparse point
+ */
+ .create_options = cifs_create_options(cifs_sb, 0) |
+ OPEN_REPARSE_POINT,
+ .fid = &fid,
+ };
if (info & SACL_SECINFO)
oparms.desired_access |= SYSTEM_SECURITY;
@@ -3266,13 +3275,14 @@ set_smb2_acl(struct cifs_ntsd *pnntsd, _
return rc;
}
- oparms.tcon = tcon;
- oparms.desired_access = access_flags;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
- oparms.disposition = FILE_OPEN;
- oparms.path = path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .desired_access = access_flags,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .disposition = FILE_OPEN,
+ .path = path,
+ .fid = &fid,
+ };
rc = SMB2_open(xid, &oparms, utf16_path, &oplock, NULL, NULL,
NULL, NULL);
@@ -5134,15 +5144,16 @@ smb2_make_node(unsigned int xid, struct
cifs_dbg(FYI, "sfu compat create special file\n");
- oparms.tcon = tcon;
- oparms.cifs_sb = cifs_sb;
- oparms.desired_access = GENERIC_WRITE;
- oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR |
- CREATE_OPTION_SPECIAL);
- oparms.disposition = FILE_CREATE;
- oparms.path = full_path;
- oparms.fid = &fid;
- oparms.reconnect = false;
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+ .cifs_sb = cifs_sb,
+ .desired_access = GENERIC_WRITE,
+ .create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR |
+ CREATE_OPTION_SPECIAL),
+ .disposition = FILE_CREATE,
+ .path = full_path,
+ .fid = &fid,
+ };
if (tcon->ses->server->oplocks)
oplock = REQ_OPLOCK;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 672/885] cifs: fix mount on old smb servers
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (670 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 671/885] cifs: Fix uninitialized memory reads for oparms.mode Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 673/885] cifs: introduce cifs_io_parms in smb2_async_writev() Greg Kroah-Hartman
` (215 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paulo Alcantara (SUSE),
Ronnie Sahlberg, Steve French
From: Paulo Alcantara <pc@manguebit.com>
commit d99e86ebde2d7b3a04190f8d14de5bf6814bf10f upstream.
The client was sending rfc1002 session request packet with a wrong
length field set, therefore failing to mount shares against old SMB
servers over port 139.
Fix this by calculating the correct length as specified in rfc1002.
Fixes: d7173623bf0b ("cifs: use ALIGN() and round_up() macros")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/connect.c | 94 ++++++++++++++++++-----------------------------
1 file changed, 35 insertions(+), 59 deletions(-)
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index b2a04b4e89a5..af49ae53aaf4 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2843,72 +2843,48 @@ ip_rfc1001_connect(struct TCP_Server_Info *server)
* negprot - BB check reconnection in case where second
* sessinit is sent but no second negprot
*/
- struct rfc1002_session_packet *ses_init_buf;
- unsigned int req_noscope_len;
- struct smb_hdr *smb_buf;
+ struct rfc1002_session_packet req = {};
+ struct smb_hdr *smb_buf = (struct smb_hdr *)&req;
+ unsigned int len;
- ses_init_buf = kzalloc(sizeof(struct rfc1002_session_packet),
- GFP_KERNEL);
+ req.trailer.session_req.called_len = sizeof(req.trailer.session_req.called_name);
- if (ses_init_buf) {
- ses_init_buf->trailer.session_req.called_len = 32;
+ if (server->server_RFC1001_name[0] != 0)
+ rfc1002mangle(req.trailer.session_req.called_name,
+ server->server_RFC1001_name,
+ RFC1001_NAME_LEN_WITH_NULL);
+ else
+ rfc1002mangle(req.trailer.session_req.called_name,
+ DEFAULT_CIFS_CALLED_NAME,
+ RFC1001_NAME_LEN_WITH_NULL);
- if (server->server_RFC1001_name[0] != 0)
- rfc1002mangle(ses_init_buf->trailer.
- session_req.called_name,
- server->server_RFC1001_name,
- RFC1001_NAME_LEN_WITH_NULL);
- else
- rfc1002mangle(ses_init_buf->trailer.
- session_req.called_name,
- DEFAULT_CIFS_CALLED_NAME,
- RFC1001_NAME_LEN_WITH_NULL);
+ req.trailer.session_req.calling_len = sizeof(req.trailer.session_req.calling_name);
- ses_init_buf->trailer.session_req.calling_len = 32;
+ /* calling name ends in null (byte 16) from old smb convention */
+ if (server->workstation_RFC1001_name[0] != 0)
+ rfc1002mangle(req.trailer.session_req.calling_name,
+ server->workstation_RFC1001_name,
+ RFC1001_NAME_LEN_WITH_NULL);
+ else
+ rfc1002mangle(req.trailer.session_req.calling_name,
+ "LINUX_CIFS_CLNT",
+ RFC1001_NAME_LEN_WITH_NULL);
- /*
- * calling name ends in null (byte 16) from old smb
- * convention.
- */
- if (server->workstation_RFC1001_name[0] != 0)
- rfc1002mangle(ses_init_buf->trailer.
- session_req.calling_name,
- server->workstation_RFC1001_name,
- RFC1001_NAME_LEN_WITH_NULL);
- else
- rfc1002mangle(ses_init_buf->trailer.
- session_req.calling_name,
- "LINUX_CIFS_CLNT",
- RFC1001_NAME_LEN_WITH_NULL);
-
- ses_init_buf->trailer.session_req.scope1 = 0;
- ses_init_buf->trailer.session_req.scope2 = 0;
- smb_buf = (struct smb_hdr *)ses_init_buf;
-
- /* sizeof RFC1002_SESSION_REQUEST with no scopes */
- req_noscope_len = sizeof(struct rfc1002_session_packet) - 2;
-
- /* == cpu_to_be32(0x81000044) */
- smb_buf->smb_buf_length =
- cpu_to_be32((RFC1002_SESSION_REQUEST << 24) | req_noscope_len);
- rc = smb_send(server, smb_buf, 0x44);
- kfree(ses_init_buf);
- /*
- * RFC1001 layer in at least one server
- * requires very short break before negprot
- * presumably because not expecting negprot
- * to follow so fast. This is a simple
- * solution that works without
- * complicating the code and causes no
- * significant slowing down on mount
- * for everyone else
- */
- usleep_range(1000, 2000);
- }
/*
- * else the negprot may still work without this
- * even though malloc failed
+ * As per rfc1002, @len must be the number of bytes that follows the
+ * length field of a rfc1002 session request payload.
+ */
+ len = sizeof(req) - offsetof(struct rfc1002_session_packet, trailer.session_req);
+
+ smb_buf->smb_buf_length = cpu_to_be32((RFC1002_SESSION_REQUEST << 24) | len);
+ rc = smb_send(server, smb_buf, len);
+ /*
+ * RFC1001 layer in at least one server requires very short break before
+ * negprot presumably because not expecting negprot to follow so fast.
+ * This is a simple solution that works without complicating the code
+ * and causes no significant slowing down on mount for everyone else
*/
+ usleep_range(1000, 2000);
return rc;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 673/885] cifs: introduce cifs_io_parms in smb2_async_writev()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (671 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 672/885] cifs: fix mount on old smb servers Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 674/885] cifs: split out smb3_use_rdma_offload() helper Greg Kroah-Hartman
` (214 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stefan Metzmacher, Steve French,
Tom Talpey, Long Li, Namjae Jeon, David Howells, linux-cifs,
Steve French
From: Stefan Metzmacher <metze@samba.org>
commit d643a8a446fc46c06837d08a056f69da2ff16025 upstream.
This will simplify the following changes and makes it easy to get
in passed in from the caller in future.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/smb2pdu.c | 53 +++++++++++++++++++++++++++++++++++++++--------------
1 file changed, 39 insertions(+), 14 deletions(-)
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -4504,10 +4504,27 @@ smb2_async_writev(struct cifs_writedata
struct kvec iov[1];
struct smb_rqst rqst = { };
unsigned int total_len;
+ struct cifs_io_parms _io_parms;
+ struct cifs_io_parms *io_parms = NULL;
if (!wdata->server)
server = wdata->server = cifs_pick_channel(tcon->ses);
+ /*
+ * in future we may get cifs_io_parms passed in from the caller,
+ * but for now we construct it here...
+ */
+ _io_parms = (struct cifs_io_parms) {
+ .tcon = tcon,
+ .server = server,
+ .offset = wdata->offset,
+ .length = wdata->bytes,
+ .persistent_fid = wdata->cfile->fid.persistent_fid,
+ .volatile_fid = wdata->cfile->fid.volatile_fid,
+ .pid = wdata->pid,
+ };
+ io_parms = &_io_parms;
+
rc = smb2_plain_req_init(SMB2_WRITE, tcon, server,
(void **) &req, &total_len);
if (rc)
@@ -4517,26 +4534,31 @@ smb2_async_writev(struct cifs_writedata
flags |= CIFS_TRANSFORM_REQ;
shdr = (struct smb2_hdr *)req;
- shdr->Id.SyncId.ProcessId = cpu_to_le32(wdata->cfile->pid);
+ shdr->Id.SyncId.ProcessId = cpu_to_le32(io_parms->pid);
- req->PersistentFileId = wdata->cfile->fid.persistent_fid;
- req->VolatileFileId = wdata->cfile->fid.volatile_fid;
+ req->PersistentFileId = io_parms->persistent_fid;
+ req->VolatileFileId = io_parms->volatile_fid;
req->WriteChannelInfoOffset = 0;
req->WriteChannelInfoLength = 0;
req->Channel = 0;
- req->Offset = cpu_to_le64(wdata->offset);
+ req->Offset = cpu_to_le64(io_parms->offset);
req->DataOffset = cpu_to_le16(
offsetof(struct smb2_write_req, Buffer));
req->RemainingBytes = 0;
- trace_smb3_write_enter(0 /* xid */, wdata->cfile->fid.persistent_fid,
- tcon->tid, tcon->ses->Suid, wdata->offset, wdata->bytes);
+ trace_smb3_write_enter(0 /* xid */,
+ io_parms->persistent_fid,
+ io_parms->tcon->tid,
+ io_parms->tcon->ses->Suid,
+ io_parms->offset,
+ io_parms->length);
+
#ifdef CONFIG_CIFS_SMB_DIRECT
/*
* If we want to do a server RDMA read, fill in and append
* smbd_buffer_descriptor_v1 to the end of write request
*/
- if (server->rdma && !server->sign && wdata->bytes >=
+ if (server->rdma && !server->sign && io_parms->length >=
server->smbd_conn->rdma_readwrite_threshold) {
struct smbd_buffer_descriptor_v1 *v1;
@@ -4590,14 +4612,14 @@ smb2_async_writev(struct cifs_writedata
}
#endif
cifs_dbg(FYI, "async write at %llu %u bytes\n",
- wdata->offset, wdata->bytes);
+ io_parms->offset, io_parms->length);
#ifdef CONFIG_CIFS_SMB_DIRECT
/* For RDMA read, I/O size is in RemainingBytes not in Length */
if (!wdata->mr)
- req->Length = cpu_to_le32(wdata->bytes);
+ req->Length = cpu_to_le32(io_parms->length);
#else
- req->Length = cpu_to_le32(wdata->bytes);
+ req->Length = cpu_to_le32(io_parms->length);
#endif
if (wdata->credits.value > 0) {
@@ -4605,7 +4627,7 @@ smb2_async_writev(struct cifs_writedata
SMB2_MAX_BUFFER_SIZE));
shdr->CreditRequest = cpu_to_le16(le16_to_cpu(shdr->CreditCharge) + 8);
- rc = adjust_credits(server, &wdata->credits, wdata->bytes);
+ rc = adjust_credits(server, &wdata->credits, io_parms->length);
if (rc)
goto async_writev_out;
@@ -4618,9 +4640,12 @@ smb2_async_writev(struct cifs_writedata
if (rc) {
trace_smb3_write_err(0 /* no xid */,
- req->PersistentFileId,
- tcon->tid, tcon->ses->Suid, wdata->offset,
- wdata->bytes, rc);
+ io_parms->persistent_fid,
+ io_parms->tcon->tid,
+ io_parms->tcon->ses->Suid,
+ io_parms->offset,
+ io_parms->length,
+ rc);
kref_put(&wdata->refcount, release);
cifs_stats_fail_inc(tcon, SMB2_WRITE_HE);
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 674/885] cifs: split out smb3_use_rdma_offload() helper
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (672 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 673/885] cifs: introduce cifs_io_parms in smb2_async_writev() Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 675/885] cifs: dont try to use rdma offload on encrypted connections Greg Kroah-Hartman
` (213 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stefan Metzmacher, Steve French,
Tom Talpey, Long Li, Namjae Jeon, David Howells, linux-cifs,
Steve French
From: Stefan Metzmacher <metze@samba.org>
commit a6559cc1d35d3eeafb0296aca347b2f745a28a74 upstream.
We should have the logic to decide if we want rdma offload
in a single spot in order to advance it in future.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/smb2pdu.c | 34 ++++++++++++++++++++++++++++------
1 file changed, 28 insertions(+), 6 deletions(-)
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -4063,6 +4063,32 @@ SMB2_flush(const unsigned int xid, struc
return rc;
}
+#ifdef CONFIG_CIFS_SMB_DIRECT
+static inline bool smb3_use_rdma_offload(struct cifs_io_parms *io_parms)
+{
+ struct TCP_Server_Info *server = io_parms->server;
+ struct cifs_tcon *tcon = io_parms->tcon;
+
+ /* we can only offload if we're connected */
+ if (!server || !tcon)
+ return false;
+
+ /* we can only offload on an rdma connection */
+ if (!server->rdma || !server->smbd_conn)
+ return false;
+
+ /* we don't support signed offload yet */
+ if (server->sign)
+ return false;
+
+ /* offload also has its overhead, so only do it if desired */
+ if (io_parms->length < server->smbd_conn->rdma_readwrite_threshold)
+ return false;
+
+ return true;
+}
+#endif /* CONFIG_CIFS_SMB_DIRECT */
+
/*
* To form a chain of read requests, any read requests after the first should
* have the end_of_chain boolean set to true.
@@ -4106,9 +4132,7 @@ smb2_new_read_req(void **buf, unsigned i
* If we want to do a RDMA write, fill in and append
* smbd_buffer_descriptor_v1 to the end of read request
*/
- if (server->rdma && rdata && !server->sign &&
- rdata->bytes >= server->smbd_conn->rdma_readwrite_threshold) {
-
+ if (smb3_use_rdma_offload(io_parms)) {
struct smbd_buffer_descriptor_v1 *v1;
bool need_invalidate = server->dialect == SMB30_PROT_ID;
@@ -4558,9 +4582,7 @@ smb2_async_writev(struct cifs_writedata
* If we want to do a server RDMA read, fill in and append
* smbd_buffer_descriptor_v1 to the end of write request
*/
- if (server->rdma && !server->sign && io_parms->length >=
- server->smbd_conn->rdma_readwrite_threshold) {
-
+ if (smb3_use_rdma_offload(io_parms)) {
struct smbd_buffer_descriptor_v1 *v1;
bool need_invalidate = server->dialect == SMB30_PROT_ID;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 675/885] cifs: dont try to use rdma offload on encrypted connections
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (673 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 674/885] cifs: split out smb3_use_rdma_offload() helper Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 676/885] cifs: Check the lease context if we actually got a lease Greg Kroah-Hartman
` (212 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stefan Metzmacher, Steve French,
Tom Talpey, Long Li, Namjae Jeon, David Howells, linux-cifs,
Steve French
From: Stefan Metzmacher <metze@samba.org>
commit 3891f6c7655a39065e44980f51ba46bb32be3133 upstream.
The aim of using encryption on a connection is to keep
the data confidential, so we must not use plaintext rdma offload
for that data!
It seems that current windows servers and ksmbd would allow
this, but that's no reason to expose the users data in plaintext!
And servers hopefully reject this in future.
Note modern windows servers support signed or encrypted offload,
see MS-SMB2 2.2.3.1.6 SMB2_RDMA_TRANSFORM_CAPABILITIES, but we don't
support that yet.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/smb2pdu.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -4081,6 +4081,10 @@ static inline bool smb3_use_rdma_offload
if (server->sign)
return false;
+ /* we don't support encrypted offload yet */
+ if (smb3_encryption_required(tcon))
+ return false;
+
/* offload also has its overhead, so only do it if desired */
if (io_parms->length < server->smbd_conn->rdma_readwrite_threshold)
return false;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 676/885] cifs: Check the lease context if we actually got a lease
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (674 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 675/885] cifs: dont try to use rdma offload on encrypted connections Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 677/885] cifs: return a single-use cfid if we did not get " Greg Kroah-Hartman
` (211 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ronnie Sahlberg, Bharath SM,
Paulo Alcantara (SUSE),
Steve French
From: Ronnie Sahlberg <lsahlber@redhat.com>
commit 66d45ca1350a3bb8d5f4db8879ccad3ed492337a upstream.
Some servers may return that we got a lease in rsp->OplockLevel
but then in the lease context contradict this and say we got no lease
at all. Thus we need to check the context if we have a lease.
Additionally, If we do not get a lease we need to make sure we close
the handle before we return an error to the caller.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/cached_dir.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
--- a/fs/cifs/cached_dir.c
+++ b/fs/cifs/cached_dir.c
@@ -221,8 +221,7 @@ int open_cached_dir(unsigned int xid, st
}
goto oshr_free;
}
-
- atomic_inc(&tcon->num_remote_opens);
+ cfid->is_open = true;
o_rsp = (struct smb2_create_rsp *)rsp_iov[0].iov_base;
oparms.fid->persistent_fid = o_rsp->PersistentFileId;
@@ -239,7 +238,8 @@ int open_cached_dir(unsigned int xid, st
&oparms.fid->epoch,
oparms.fid->lease_key, &oplock,
NULL, NULL);
-
+ if (!(oplock & SMB2_LEASE_READ_CACHING_HE))
+ goto oshr_free;
qi_rsp = (struct smb2_query_info_rsp *)rsp_iov[1].iov_base;
if (le32_to_cpu(qi_rsp->OutputBufferLength) < sizeof(struct smb2_file_all_info))
goto oshr_free;
@@ -262,7 +262,6 @@ int open_cached_dir(unsigned int xid, st
cfid->dentry = dentry;
cfid->tcon = tcon;
cfid->time = jiffies;
- cfid->is_open = true;
cfid->has_lease = true;
oshr_free:
@@ -282,12 +281,17 @@ oshr_free:
}
spin_unlock(&cfids->cfid_list_lock);
if (rc) {
+ if (cfid->is_open)
+ SMB2_close(0, cfid->tcon, cfid->fid.persistent_fid,
+ cfid->fid.volatile_fid);
free_cached_dir(cfid);
cfid = NULL;
}
- if (rc == 0)
+ if (rc == 0) {
*ret_cfid = cfid;
+ atomic_inc(&tcon->num_remote_opens);
+ }
return rc;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 677/885] cifs: return a single-use cfid if we did not get a lease
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (675 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 676/885] cifs: Check the lease context if we actually got a lease Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 678/885] scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization Greg Kroah-Hartman
` (210 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ronnie Sahlberg, Bharath SM,
Paulo Alcantara (SUSE),
Steve French
From: Ronnie Sahlberg <lsahlber@redhat.com>
commit 8e843bf38f7be0766642a91523cfa65f2b021a8a upstream.
If we did not get a lease we can still return a single use cfid to the caller.
The cfid will not have has_lease set and will thus not be shared with any
other concurrent users and will be freed immediately when the caller
drops the handle.
This avoids extra roundtrips for servers that do not support directory leases
where they would first fail to get a cfid with a lease and then fallback
to try a normal SMB2_open()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/cached_dir.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
--- a/fs/cifs/cached_dir.c
+++ b/fs/cifs/cached_dir.c
@@ -14,6 +14,7 @@
static struct cached_fid *init_cached_dir(const char *path);
static void free_cached_dir(struct cached_fid *cfid);
+static void smb2_close_cached_fid(struct kref *ref);
static struct cached_fid *find_or_create_cached_dir(struct cached_fids *cfids,
const char *path,
@@ -221,6 +222,7 @@ int open_cached_dir(unsigned int xid, st
}
goto oshr_free;
}
+ cfid->tcon = tcon;
cfid->is_open = true;
o_rsp = (struct smb2_create_rsp *)rsp_iov[0].iov_base;
@@ -233,7 +235,6 @@ int open_cached_dir(unsigned int xid, st
if (o_rsp->OplockLevel != SMB2_OPLOCK_LEVEL_LEASE)
goto oshr_free;
-
smb2_parse_contexts(server, o_rsp,
&oparms.fid->epoch,
oparms.fid->lease_key, &oplock,
@@ -260,7 +261,6 @@ int open_cached_dir(unsigned int xid, st
}
}
cfid->dentry = dentry;
- cfid->tcon = tcon;
cfid->time = jiffies;
cfid->has_lease = true;
@@ -271,7 +271,7 @@ oshr_free:
free_rsp_buf(resp_buftype[0], rsp_iov[0].iov_base);
free_rsp_buf(resp_buftype[1], rsp_iov[1].iov_base);
spin_lock(&cfids->cfid_list_lock);
- if (!cfid->has_lease) {
+ if (rc && !cfid->has_lease) {
if (cfid->on_list) {
list_del(&cfid->entry);
cfid->on_list = false;
@@ -280,6 +280,15 @@ oshr_free:
rc = -ENOENT;
}
spin_unlock(&cfids->cfid_list_lock);
+ if (!rc && !cfid->has_lease) {
+ /*
+ * We are guaranteed to have two references at this point.
+ * One for the caller and one for a potential lease.
+ * Release the Lease-ref so that the directory will be closed
+ * when the caller closes the cached handle.
+ */
+ kref_put(&cfid->refcount, smb2_close_cached_fid);
+ }
if (rc) {
if (cfid->is_open)
SMB2_close(0, cfid->tcon, cfid->fid.persistent_fid,
@@ -340,6 +349,7 @@ smb2_close_cached_fid(struct kref *ref)
if (cfid->is_open) {
SMB2_close(0, cfid->tcon, cfid->fid.persistent_fid,
cfid->fid.volatile_fid);
+ atomic_dec(&cfid->tcon->num_remote_opens);
}
free_cached_dir(cfid);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 678/885] scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (676 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 677/885] cifs: return a single-use cfid if we did not get " Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 679/885] scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() Greg Kroah-Hartman
` (209 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shinichiro Kawasaki, Damien Le Moal,
Sathya Prakash Veerichetty, Martin K. Petersen
From: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
commit e39ea831ebad4ab15c4748cb62a397a8abcca36e upstream.
Commit c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic")
introduced an array mrioc->evtack_cmds but initialization of the array
elements was missed. They are just zero cleared. The function
mpi3mr_complete_evt_ack() refers host_tag field of the elements. Due to the
zero value of the host_tag field, the function calls clear_bit() for
mrico->evtack_cmds_bitmap with wrong bit index. This results in memory
access to invalid address and "BUG: KASAN: use-after-free". This BUG was
observed at eHBA-9600 firmware update to version 8.3.1.0. To fix it, add
the missing initialization of mrioc->evtack_cmds.
Link: https://lore.kernel.org/r/20230214005019.1897251-5-shinichiro.kawasaki@wdc.com
Cc: stable@vger.kernel.org
Fixes: c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/mpi3mr/mpi3mr_os.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -4952,6 +4952,10 @@ mpi3mr_probe(struct pci_dev *pdev, const
mpi3mr_init_drv_cmd(&mrioc->dev_rmhs_cmds[i],
MPI3MR_HOSTTAG_DEVRMCMD_MIN + i);
+ for (i = 0; i < MPI3MR_NUM_EVTACKCMD; i++)
+ mpi3mr_init_drv_cmd(&mrioc->evtack_cmds[i],
+ MPI3MR_HOSTTAG_EVTACKCMD_MIN + i);
+
if (pdev->revision)
mrioc->enable_segqueue = true;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 679/885] scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (677 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 678/885] scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 680/885] scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi Greg Kroah-Hartman
` (208 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shinichiro Kawasaki,
Sathya Prakash Veerichetty, Martin K. Petersen
From: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
commit fb428a2005fc1260d18b989cc5199f281617f44d upstream.
The function mpi3mr_get_all_tgt_info() has four issues:
1) It calculates valid entry length in alltgt_info assuming the header part
of the struct mpi3mr_device_map_info would equal to sizeof(u32). The
correct size is sizeof(u64).
2) When it calculates the valid entry length kern_entrylen, it excludes one
entry by subtracting 1 from num_devices.
3) It copies num_device by calling memcpy(). Substitution is enough.
4) It does not specify the calculated length to sg_copy_from_buffer().
Instead, it specifies the payload length which is larger than the
alltgt_info size. It causes "BUG: KASAN: slab-out-of-bounds".
Fix the issues by using the correct header size, removing the subtraction
from num_devices, replacing the memcpy() with substitution and specifying
the correct length to sg_copy_from_buffer().
Link: https://lore.kernel.org/r/20230214005019.1897251-2-shinichiro.kawasaki@wdc.com
Cc: stable@vger.kernel.org
Fixes: f5e6d5a34376 ("scsi: mpi3mr: Add support for driver commands")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/mpi3mr/mpi3mr_app.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_app.c b/drivers/scsi/mpi3mr/mpi3mr_app.c
index 9baac224b213..72054e3a26cb 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_app.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_app.c
@@ -312,7 +312,7 @@ static long mpi3mr_get_all_tgt_info(struct mpi3mr_ioc *mrioc,
num_devices++;
spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
- if ((job->request_payload.payload_len == sizeof(u32)) ||
+ if ((job->request_payload.payload_len <= sizeof(u64)) ||
list_empty(&mrioc->tgtdev_list)) {
sg_copy_from_buffer(job->request_payload.sg_list,
job->request_payload.sg_cnt,
@@ -320,14 +320,14 @@ static long mpi3mr_get_all_tgt_info(struct mpi3mr_ioc *mrioc,
return 0;
}
- kern_entrylen = (num_devices - 1) * sizeof(*devmap_info);
- size = sizeof(*alltgt_info) + kern_entrylen;
+ kern_entrylen = num_devices * sizeof(*devmap_info);
+ size = sizeof(u64) + kern_entrylen;
alltgt_info = kzalloc(size, GFP_KERNEL);
if (!alltgt_info)
return -ENOMEM;
devmap_info = alltgt_info->dmi;
- memset((u8 *)devmap_info, 0xFF, (kern_entrylen + sizeof(*devmap_info)));
+ memset((u8 *)devmap_info, 0xFF, kern_entrylen);
spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list) {
if (i < num_devices) {
@@ -344,9 +344,10 @@ static long mpi3mr_get_all_tgt_info(struct mpi3mr_ioc *mrioc,
num_devices = i;
spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
- memcpy(&alltgt_info->num_devices, &num_devices, sizeof(num_devices));
+ alltgt_info->num_devices = num_devices;
- usr_entrylen = (job->request_payload.payload_len - sizeof(u32)) / sizeof(*devmap_info);
+ usr_entrylen = (job->request_payload.payload_len - sizeof(u64)) /
+ sizeof(*devmap_info);
usr_entrylen *= sizeof(*devmap_info);
min_entrylen = min(usr_entrylen, kern_entrylen);
if (min_entrylen && (!memcpy(&alltgt_info->dmi, devmap_info, min_entrylen))) {
@@ -358,7 +359,7 @@ static long mpi3mr_get_all_tgt_info(struct mpi3mr_ioc *mrioc,
sg_copy_from_buffer(job->request_payload.sg_list,
job->request_payload.sg_cnt,
- alltgt_info, job->request_payload.payload_len);
+ alltgt_info, (min_entrylen + sizeof(u64)));
rval = 0;
out:
kfree(alltgt_info);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 680/885] scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (678 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 679/885] scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 681/885] btrfs: hold block group refcount during async discard Greg Kroah-Hartman
` (207 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shinichiro Kawasaki,
Sathya Prakash Veerichetty, Martin K. Petersen
From: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
commit eeb270aee3e085411399f129fc14fa04bd6d83cf upstream.
In the function mpi3mr_get_all_tgt_info(), devmap_info points to
alltgt_info->dmi then there is no need to memcpy() data from devmap_info to
alltgt_info->dmi. Remove the unnecessary memcpy(). This also allows to
remove the local variable 'rval' and the goto label 'out'.
Link: https://lore.kernel.org/r/20230214005019.1897251-3-shinichiro.kawasaki@wdc.com
Cc: stable@vger.kernel.org
Fixes: f5e6d5a34376 ("scsi: mpi3mr: Add support for driver commands")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/mpi3mr/mpi3mr_app.c | 13 ++-----------
1 file changed, 2 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_app.c b/drivers/scsi/mpi3mr/mpi3mr_app.c
index 72054e3a26cb..bff637702397 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_app.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_app.c
@@ -293,7 +293,6 @@ static long mpi3mr_bsg_pel_enable(struct mpi3mr_ioc *mrioc,
static long mpi3mr_get_all_tgt_info(struct mpi3mr_ioc *mrioc,
struct bsg_job *job)
{
- long rval = -EINVAL;
u16 num_devices = 0, i = 0, size;
unsigned long flags;
struct mpi3mr_tgt_dev *tgtdev;
@@ -304,7 +303,7 @@ static long mpi3mr_get_all_tgt_info(struct mpi3mr_ioc *mrioc,
if (job->request_payload.payload_len < sizeof(u32)) {
dprint_bsg_err(mrioc, "%s: invalid size argument\n",
__func__);
- return rval;
+ return -EINVAL;
}
spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
@@ -350,20 +349,12 @@ static long mpi3mr_get_all_tgt_info(struct mpi3mr_ioc *mrioc,
sizeof(*devmap_info);
usr_entrylen *= sizeof(*devmap_info);
min_entrylen = min(usr_entrylen, kern_entrylen);
- if (min_entrylen && (!memcpy(&alltgt_info->dmi, devmap_info, min_entrylen))) {
- dprint_bsg_err(mrioc, "%s:%d: device map info copy failed\n",
- __func__, __LINE__);
- rval = -EFAULT;
- goto out;
- }
sg_copy_from_buffer(job->request_payload.sg_list,
job->request_payload.sg_cnt,
alltgt_info, (min_entrylen + sizeof(u64)));
- rval = 0;
-out:
kfree(alltgt_info);
- return rval;
+ return 0;
}
/**
* mpi3mr_get_change_count - Get topology change count
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 681/885] btrfs: hold block group refcount during async discard
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (679 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 680/885] scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 682/885] locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath Greg Kroah-Hartman
` (206 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Boris Burkov, David Sterba
From: Boris Burkov <boris@bur.io>
commit 2b5463fcbdfb24e898916bcae2b1359042d26963 upstream.
Async discard does not acquire the block group reference count while it
holds a reference on the discard list. This is generally OK, as the
paths which destroy block groups tend to try to synchronize on
cancelling async discard work. However, relying on cancelling work
requires careful analysis to be sure it is safe from races with
unpinning scheduling more work.
While I am unable to find a race with unpinning in the current code for
either the unused bgs or relocation paths, I believe we have one in an
older version of auto relocation in a Meta internal build. This suggests
that this is in fact an error prone model, and could be fragile to
future changes to these bg deletion paths.
To make this ownership more clear, add a refcount for async discard. If
work is queued for a block group, its refcount should be incremented,
and when work is completed or canceled, it should be decremented.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/discard.c | 41 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 38 insertions(+), 3 deletions(-)
--- a/fs/btrfs/discard.c
+++ b/fs/btrfs/discard.c
@@ -77,6 +77,7 @@ static struct list_head *get_discard_lis
static void __add_to_discard_list(struct btrfs_discard_ctl *discard_ctl,
struct btrfs_block_group *block_group)
{
+ lockdep_assert_held(&discard_ctl->lock);
if (!btrfs_run_discard_work(discard_ctl))
return;
@@ -88,6 +89,8 @@ static void __add_to_discard_list(struct
BTRFS_DISCARD_DELAY);
block_group->discard_state = BTRFS_DISCARD_RESET_CURSOR;
}
+ if (list_empty(&block_group->discard_list))
+ btrfs_get_block_group(block_group);
list_move_tail(&block_group->discard_list,
get_discard_list(discard_ctl, block_group));
@@ -107,8 +110,12 @@ static void add_to_discard_list(struct b
static void add_to_discard_unused_list(struct btrfs_discard_ctl *discard_ctl,
struct btrfs_block_group *block_group)
{
+ bool queued;
+
spin_lock(&discard_ctl->lock);
+ queued = !list_empty(&block_group->discard_list);
+
if (!btrfs_run_discard_work(discard_ctl)) {
spin_unlock(&discard_ctl->lock);
return;
@@ -120,6 +127,8 @@ static void add_to_discard_unused_list(s
block_group->discard_eligible_time = (ktime_get_ns() +
BTRFS_DISCARD_UNUSED_DELAY);
block_group->discard_state = BTRFS_DISCARD_RESET_CURSOR;
+ if (!queued)
+ btrfs_get_block_group(block_group);
list_add_tail(&block_group->discard_list,
&discard_ctl->discard_list[BTRFS_DISCARD_INDEX_UNUSED]);
@@ -130,6 +139,7 @@ static bool remove_from_discard_list(str
struct btrfs_block_group *block_group)
{
bool running = false;
+ bool queued = false;
spin_lock(&discard_ctl->lock);
@@ -139,7 +149,16 @@ static bool remove_from_discard_list(str
}
block_group->discard_eligible_time = 0;
+ queued = !list_empty(&block_group->discard_list);
list_del_init(&block_group->discard_list);
+ /*
+ * If the block group is currently running in the discard workfn, we
+ * don't want to deref it, since it's still being used by the workfn.
+ * The workfn will notice this case and deref the block group when it is
+ * finished.
+ */
+ if (queued && !running)
+ btrfs_put_block_group(block_group);
spin_unlock(&discard_ctl->lock);
@@ -212,10 +231,12 @@ again:
if (block_group && now >= block_group->discard_eligible_time) {
if (block_group->discard_index == BTRFS_DISCARD_INDEX_UNUSED &&
block_group->used != 0) {
- if (btrfs_is_block_group_data_only(block_group))
+ if (btrfs_is_block_group_data_only(block_group)) {
__add_to_discard_list(discard_ctl, block_group);
- else
+ } else {
list_del_init(&block_group->discard_list);
+ btrfs_put_block_group(block_group);
+ }
goto again;
}
if (block_group->discard_state == BTRFS_DISCARD_RESET_CURSOR) {
@@ -502,6 +523,15 @@ static void btrfs_discard_workfn(struct
spin_lock(&discard_ctl->lock);
discard_ctl->prev_discard = trimmed;
discard_ctl->prev_discard_time = now;
+ /*
+ * If the block group was removed from the discard list while it was
+ * running in this workfn, then we didn't deref it, since this function
+ * still owned that reference. But we set the discard_ctl->block_group
+ * back to NULL, so we can use that condition to know that now we need
+ * to deref the block_group.
+ */
+ if (discard_ctl->block_group == NULL)
+ btrfs_put_block_group(block_group);
discard_ctl->block_group = NULL;
__btrfs_discard_schedule_work(discard_ctl, now, false);
spin_unlock(&discard_ctl->lock);
@@ -638,8 +668,12 @@ void btrfs_discard_punt_unused_bgs_list(
list_for_each_entry_safe(block_group, next, &fs_info->unused_bgs,
bg_list) {
list_del_init(&block_group->bg_list);
- btrfs_put_block_group(block_group);
btrfs_discard_queue_work(&fs_info->discard_ctl, block_group);
+ /*
+ * This put is for the get done by btrfs_mark_bg_unused.
+ * Queueing discard incremented it for discard's reference.
+ */
+ btrfs_put_block_group(block_group);
}
spin_unlock(&fs_info->unused_bgs_lock);
}
@@ -669,6 +703,7 @@ static void btrfs_discard_purge_list(str
if (block_group->used == 0)
btrfs_mark_bg_unused(block_group);
spin_lock(&discard_ctl->lock);
+ btrfs_put_block_group(block_group);
}
}
spin_unlock(&discard_ctl->lock);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 682/885] locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (680 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 681/885] btrfs: hold block group refcount during async discard Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 683/885] ksmbd: fix wrong data area length for smb2 lock request Greg Kroah-Hartman
` (205 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Waiman Long, Ingo Molnar, Mukesh Ojha
From: Waiman Long <longman@redhat.com>
commit b613c7f31476c44316bfac1af7cac714b7d6bef9 upstream.
A non-first waiter can potentially spin in the for loop of
rwsem_down_write_slowpath() without sleeping but fail to acquire the
lock even if the rwsem is free if the following sequence happens:
Non-first RT waiter First waiter Lock holder
------------------- ------------ -----------
Acquire wait_lock
rwsem_try_write_lock():
Set handoff bit if RT or
wait too long
Set waiter->handoff_set
Release wait_lock
Acquire wait_lock
Inherit waiter->handoff_set
Release wait_lock
Clear owner
Release lock
if (waiter.handoff_set) {
rwsem_spin_on_owner(();
if (OWNER_NULL)
goto trylock_again;
}
trylock_again:
Acquire wait_lock
rwsem_try_write_lock():
if (first->handoff_set && (waiter != first))
return false;
Release wait_lock
A non-first waiter cannot really acquire the rwsem even if it mistakenly
believes that it can spin on OWNER_NULL value. If that waiter happens
to be an RT task running on the same CPU as the first waiter, it can
block the first waiter from acquiring the rwsem leading to live lock.
Fix this problem by making sure that a non-first waiter cannot spin in
the slowpath loop without sleeping.
Fixes: d257cc8cb8d5 ("locking/rwsem: Make handoff bit handling more consistent")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230126003628.365092-2-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/locking/rwsem.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
--- a/kernel/locking/rwsem.c
+++ b/kernel/locking/rwsem.c
@@ -624,18 +624,16 @@ static inline bool rwsem_try_write_lock(
*/
if (first->handoff_set && (waiter != first))
return false;
-
- /*
- * First waiter can inherit a previously set handoff
- * bit and spin on rwsem if lock acquisition fails.
- */
- if (waiter == first)
- waiter->handoff_set = true;
}
new = count;
if (count & RWSEM_LOCK_MASK) {
+ /*
+ * A waiter (first or not) can set the handoff bit
+ * if it is an RT task or wait in the wait queue
+ * for too long.
+ */
if (has_handoff || (!rt_task(waiter->task) &&
!time_after(jiffies, waiter->timeout)))
return false;
@@ -651,11 +649,12 @@ static inline bool rwsem_try_write_lock(
} while (!atomic_long_try_cmpxchg_acquire(&sem->count, &count, new));
/*
- * We have either acquired the lock with handoff bit cleared or
- * set the handoff bit.
+ * We have either acquired the lock with handoff bit cleared or set
+ * the handoff bit. Only the first waiter can have its handoff_set
+ * set here to enable optimistic spinning in slowpath loop.
*/
if (new & RWSEM_FLAG_HANDOFF) {
- waiter->handoff_set = true;
+ first->handoff_set = true;
lockevent_inc(rwsem_wlock_handoff);
return false;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 683/885] ksmbd: fix wrong data area length for smb2 lock request
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (681 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 682/885] locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 684/885] ksmbd: do not allow the actual frame length to be smaller than the rfc1002 length Greg Kroah-Hartman
` (204 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Namjae Jeon, Steve French
From: Namjae Jeon <linkinjeon@kernel.org>
commit 8f8c43b125882ac14372f8dca0c8e50a59e78d79 upstream.
When turning debug mode on, The following error message from
ksmbd_smb2_check_message() is coming.
ksmbd: cli req padded more than expected. Length 112 not 88 for cmd:10 mid:14
data area length calculation for smb2 lock request in smb2_get_data_area_len() is
incorrect.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ksmbd/smb2misc.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
--- a/fs/ksmbd/smb2misc.c
+++ b/fs/ksmbd/smb2misc.c
@@ -149,15 +149,11 @@ static int smb2_get_data_area_len(unsign
break;
case SMB2_LOCK:
{
- int lock_count;
+ unsigned short lock_count;
- /*
- * smb2_lock request size is 48 included single
- * smb2_lock_element structure size.
- */
- lock_count = le16_to_cpu(((struct smb2_lock_req *)hdr)->LockCount) - 1;
+ lock_count = le16_to_cpu(((struct smb2_lock_req *)hdr)->LockCount);
if (lock_count > 0) {
- *off = __SMB2_HEADER_STRUCTURE_SIZE + 48;
+ *off = offsetof(struct smb2_lock_req, locks);
*len = sizeof(struct smb2_lock_element) * lock_count;
}
break;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 684/885] ksmbd: do not allow the actual frame length to be smaller than the rfc1002 length
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (682 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 683/885] ksmbd: fix wrong data area length for smb2 lock request Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 685/885] ksmbd: fix possible memory leak in smb2_lock() Greg Kroah-Hartman
` (203 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Namjae Jeon, Steve French
From: Namjae Jeon <linkinjeon@kernel.org>
commit fb533473d1595fe79ecb528fda1de33552b07178 upstream.
ksmbd allowed the actual frame length to be smaller than the rfc1002
length. If allowed, it is possible to allocates a large amount of memory
that can be limited by credit management and can eventually cause memory
exhaustion problem. This patch do not allow it except SMB2 Negotiate
request which will be validated when message handling proceeds.
Also, Allow a message that padded to 8byte boundary.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ksmbd/smb2misc.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
--- a/fs/ksmbd/smb2misc.c
+++ b/fs/ksmbd/smb2misc.c
@@ -408,20 +408,19 @@ int ksmbd_smb2_check_message(struct ksmb
goto validate_credit;
/*
- * windows client also pad up to 8 bytes when compounding.
- * If pad is longer than eight bytes, log the server behavior
- * (once), since may indicate a problem but allow it and
- * continue since the frame is parseable.
+ * SMB2 NEGOTIATE request will be validated when message
+ * handling proceeds.
*/
- if (clc_len < len) {
- ksmbd_debug(SMB,
- "cli req padded more than expected. Length %d not %d for cmd:%d mid:%llu\n",
- len, clc_len, command,
- le64_to_cpu(hdr->MessageId));
+ if (command == SMB2_NEGOTIATE_HE)
goto validate_credit;
- }
- ksmbd_debug(SMB,
+ /*
+ * Allow a message that padded to 8byte boundary.
+ */
+ if (clc_len < len && (len - clc_len) < 8)
+ goto validate_credit;
+
+ pr_err_ratelimited(
"cli req too short, len %d not %d. cmd:%d mid:%llu\n",
len, clc_len, command,
le64_to_cpu(hdr->MessageId));
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 685/885] ksmbd: fix possible memory leak in smb2_lock()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (683 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 684/885] ksmbd: do not allow the actual frame length to be smaller than the rfc1002 length Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 686/885] torture: Fix hang during kthread shutdown phase Greg Kroah-Hartman
` (202 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Hangyu Hua, Namjae Jeon, Steve French
From: Hangyu Hua <hbh25y@gmail.com>
commit d3ca9f7aeba793d74361d88a8800b2f205c9236b upstream.
argv needs to be free when setup_async_work fails or when the current
process is woken up.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ksmbd/smb2pdu.c | 28 +++++++++++++---------------
fs/ksmbd/vfs_cache.c | 5 ++---
2 files changed, 15 insertions(+), 18 deletions(-)
--- a/fs/ksmbd/smb2pdu.c
+++ b/fs/ksmbd/smb2pdu.c
@@ -6642,7 +6642,7 @@ int smb2_cancel(struct ksmbd_work *work)
struct ksmbd_conn *conn = work->conn;
struct smb2_hdr *hdr = smb2_get_msg(work->request_buf);
struct smb2_hdr *chdr;
- struct ksmbd_work *cancel_work = NULL, *iter;
+ struct ksmbd_work *iter;
struct list_head *command_list;
ksmbd_debug(SMB, "smb2 cancel called on mid %llu, async flags 0x%x\n",
@@ -6664,7 +6664,9 @@ int smb2_cancel(struct ksmbd_work *work)
"smb2 with AsyncId %llu cancelled command = 0x%x\n",
le64_to_cpu(hdr->Id.AsyncId),
le16_to_cpu(chdr->Command));
- cancel_work = iter;
+ iter->state = KSMBD_WORK_CANCELLED;
+ if (iter->cancel_fn)
+ iter->cancel_fn(iter->cancel_argv);
break;
}
spin_unlock(&conn->request_lock);
@@ -6683,18 +6685,12 @@ int smb2_cancel(struct ksmbd_work *work)
"smb2 with mid %llu cancelled command = 0x%x\n",
le64_to_cpu(hdr->MessageId),
le16_to_cpu(chdr->Command));
- cancel_work = iter;
+ iter->state = KSMBD_WORK_CANCELLED;
break;
}
spin_unlock(&conn->request_lock);
}
- if (cancel_work) {
- cancel_work->state = KSMBD_WORK_CANCELLED;
- if (cancel_work->cancel_fn)
- cancel_work->cancel_fn(cancel_work->cancel_argv);
- }
-
/* For SMB2_CANCEL command itself send no response*/
work->send_no_response = 1;
return 0;
@@ -7055,6 +7051,14 @@ skip:
ksmbd_vfs_posix_lock_wait(flock);
+ spin_lock(&work->conn->request_lock);
+ spin_lock(&fp->f_lock);
+ list_del(&work->fp_entry);
+ work->cancel_fn = NULL;
+ kfree(argv);
+ spin_unlock(&fp->f_lock);
+ spin_unlock(&work->conn->request_lock);
+
if (work->state != KSMBD_WORK_ACTIVE) {
list_del(&smb_lock->llist);
spin_lock(&work->conn->llist_lock);
@@ -7063,9 +7067,6 @@ skip:
locks_free_lock(flock);
if (work->state == KSMBD_WORK_CANCELLED) {
- spin_lock(&fp->f_lock);
- list_del(&work->fp_entry);
- spin_unlock(&fp->f_lock);
rsp->hdr.Status =
STATUS_CANCELLED;
kfree(smb_lock);
@@ -7087,9 +7088,6 @@ skip:
list_del(&smb_lock->clist);
spin_unlock(&work->conn->llist_lock);
- spin_lock(&fp->f_lock);
- list_del(&work->fp_entry);
- spin_unlock(&fp->f_lock);
goto retry;
} else if (!rc) {
spin_lock(&work->conn->llist_lock);
--- a/fs/ksmbd/vfs_cache.c
+++ b/fs/ksmbd/vfs_cache.c
@@ -364,12 +364,11 @@ static void __put_fd_final(struct ksmbd_
static void set_close_state_blocked_works(struct ksmbd_file *fp)
{
- struct ksmbd_work *cancel_work, *ctmp;
+ struct ksmbd_work *cancel_work;
spin_lock(&fp->f_lock);
- list_for_each_entry_safe(cancel_work, ctmp, &fp->blocked_works,
+ list_for_each_entry(cancel_work, &fp->blocked_works,
fp_entry) {
- list_del(&cancel_work->fp_entry);
cancel_work->state = KSMBD_WORK_CLOSED;
cancel_work->cancel_fn(cancel_work->cancel_argv);
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 686/885] torture: Fix hang during kthread shutdown phase
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (684 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 685/885] ksmbd: fix possible memory leak in smb2_lock() Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 687/885] ARM: dts: exynos: correct HDMI phy compatible in Exynos4 Greg Kroah-Hartman
` (201 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paul McKenney, Frederic Weisbecker,
Zhouyi Zhou, Joel Fernandes (Google),
Davidlohr Bueso
From: Joel Fernandes (Google) <joel@joelfernandes.org>
commit d52d3a2bf408ff86f3a79560b5cce80efb340239 upstream.
During rcutorture shutdown, the rcu_torture_cleanup() function calls
torture_cleanup_begin(), which sets the fullstop global variable to
FULLSTOP_RMMOD. This causes the rcutorture threads for readers and
fakewriters to exit all of their "while" loops and start shutting down.
They then call torture_kthread_stopping(), which in turn waits for
kthread_stop() to be called. However, rcu_torture_cleanup() has
not yet called kthread_stop() on those threads, and before it gets a
chance to do so, multiple instances of torture_kthread_stopping() invoke
schedule_timeout_interruptible(1) in a tight loop. Tracing confirms that
TIMER_SOFTIRQ can then continuously execute timer callbacks. If that
TIMER_SOFTIRQ preempts the task executing rcu_torture_cleanup(), that
task might never invoke kthread_stop().
This commit improves this situation by increasing the timeout passed to
schedule_timeout_interruptible() from one jiffy to 1/20th of a second.
This change prevents TIMER_SOFTIRQ from monopolizing its CPU, thus
allowing rcu_torture_cleanup() to carry out the needed kthread_stop()
invocations. Testing has shown 100 runs of TREE07 passing reliably,
as oppose to the tens-of-percent failure rates seen beforehand.
Cc: Paul McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/torture.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/torture.c b/kernel/torture.c
index 29afc62f2bfe..1a0519b836ac 100644
--- a/kernel/torture.c
+++ b/kernel/torture.c
@@ -915,7 +915,7 @@ void torture_kthread_stopping(char *title)
VERBOSE_TOROUT_STRING(buf);
while (!kthread_should_stop()) {
torture_shutdown_absorb(title);
- schedule_timeout_uninterruptible(1);
+ schedule_timeout_uninterruptible(HZ / 20);
}
}
EXPORT_SYMBOL_GPL(torture_kthread_stopping);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 687/885] ARM: dts: exynos: correct HDMI phy compatible in Exynos4
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (685 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 686/885] torture: Fix hang during kthread shutdown phase Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 688/885] io_uring: mark task TASK_RUNNING before handling resume/task work Greg Kroah-Hartman
` (200 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
commit af1c89ddb74f170eccd5a57001d7317560b638ea upstream.
The HDMI phy compatible was missing vendor prefix.
Fixes: ed80d4cab772 ("ARM: dts: add hdmi related nodes for exynos4 SoCs")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230125094513.155063-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/exynos4.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -605,7 +605,7 @@
status = "disabled";
hdmi_i2c_phy: hdmiphy@38 {
- compatible = "exynos4210-hdmiphy";
+ compatible = "samsung,exynos4210-hdmiphy";
reg = <0x38>;
};
};
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 688/885] io_uring: mark task TASK_RUNNING before handling resume/task work
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (686 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 687/885] ARM: dts: exynos: correct HDMI phy compatible in Exynos4 Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 689/885] hfs: fix missing hfs_bnode_get() in __hfs_bnode_create Greg Kroah-Hartman
` (199 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, kernel test robot, Jens Axboe
From: Jens Axboe <axboe@kernel.dk>
commit 2f2bb1ffc9983e227424d0787289da5483b0c74f upstream.
Just like for task_work, set the task mode to TASK_RUNNING before doing
any potential resume work. We're not holding any locks at this point,
but we may have already set the task state to TASK_INTERRUPTIBLE in
preparation for going to sleep waiting for events. Ensure that we set it
back to TASK_RUNNING if we have work to process, to avoid warnings on
calling blocking operations with !TASK_RUNNING.
Fixes: b5d3ae202fbf ("io_uring: handle TIF_NOTIFY_RESUME when checking for task_work")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202302062208.24d3e563-oliver.sang@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
io_uring/io_uring.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/io_uring/io_uring.h
+++ b/io_uring/io_uring.h
@@ -261,8 +261,10 @@ static inline int io_run_task_work(void)
* notify work that needs processing.
*/
if (current->flags & PF_IO_WORKER &&
- test_thread_flag(TIF_NOTIFY_RESUME))
+ test_thread_flag(TIF_NOTIFY_RESUME)) {
+ __set_current_state(TASK_RUNNING);
resume_user_mode_work(NULL);
+ }
if (task_work_pending(current)) {
__set_current_state(TASK_RUNNING);
task_work_run();
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 689/885] hfs: fix missing hfs_bnode_get() in __hfs_bnode_create
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (687 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 688/885] io_uring: mark task TASK_RUNNING before handling resume/task work Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 690/885] fs: hfsplus: fix UAF issue in hfsplus_put_super Greg Kroah-Hartman
` (198 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+5b04b49a7ec7226c7426,
Liu Shixin, Fabio M. De Francesco, Viacheslav Dubeyko,
Andrew Morton
From: Liu Shixin <liushixin2@huawei.com>
commit a9dc087fd3c484fd1ed18c5efb290efaaf44ce03 upstream.
Syzbot found a kernel BUG in hfs_bnode_put():
kernel BUG at fs/hfs/bnode.c:466!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 3634 Comm: kworker/u4:5 Not tainted 6.1.0-rc7-syzkaller-00190-g97ee9d1c1696 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: writeback wb_workfn (flush-7:0)
RIP: 0010:hfs_bnode_put+0x46f/0x480 fs/hfs/bnode.c:466
Code: 8a 80 ff e9 73 fe ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a0 fe ff ff 48 89 df e8 db 8a 80 ff e9 93 fe ff ff e8 a1 68 2c ff <0f> 0b e8 9a 68 2c ff 0f 0b 0f 1f 84 00 00 00 00 00 55 41 57 41 56
RSP: 0018:ffffc90003b4f258 EFLAGS: 00010293
RAX: ffffffff825e318f RBX: 0000000000000000 RCX: ffff8880739dd7c0
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc90003b4f430 R08: ffffffff825e2d9b R09: ffffed10045157d1
R10: ffffed10045157d1 R11: 1ffff110045157d0 R12: ffff8880228abe80
R13: ffff88807016c000 R14: dffffc0000000000 R15: ffff8880228abe00
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa6ebe88718 CR3: 000000001e93d000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
hfs_write_inode+0x1bc/0xb40
write_inode fs/fs-writeback.c:1440 [inline]
__writeback_single_inode+0x4d6/0x670 fs/fs-writeback.c:1652
writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1878
__writeback_inodes_wb+0x125/0x420 fs/fs-writeback.c:1949
wb_writeback+0x440/0x7b0 fs/fs-writeback.c:2054
wb_check_start_all fs/fs-writeback.c:2176 [inline]
wb_do_writeback fs/fs-writeback.c:2202 [inline]
wb_workfn+0x827/0xef0 fs/fs-writeback.c:2235
process_one_work+0x877/0xdb0 kernel/workqueue.c:2289
worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
kthread+0x266/0x300 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
The BUG_ON() is triggered at here:
/* Dispose of resources used by a node */
void hfs_bnode_put(struct hfs_bnode *node)
{
if (node) {
<skipped>
BUG_ON(!atomic_read(&node->refcnt)); <- we have issue here!!!!
<skipped>
}
}
By tracing the refcnt, I found the node is created by hfs_bmap_alloc()
with refcnt 1. Then the node is used by hfs_btree_write(). There is a
missing of hfs_bnode_get() after find the node. The issue happened in
following path:
<alloc>
hfs_bmap_alloc
hfs_bnode_find
__hfs_bnode_create <- allocate a new node with refcnt 1.
hfs_bnode_put <- decrease the refcnt
<write>
hfs_btree_write
hfs_bnode_find
__hfs_bnode_create
hfs_bnode_findhash <- find the node without refcnt increased.
hfs_bnode_put <- trigger the BUG_ON() since refcnt is 0.
Link: https://lkml.kernel.org/r/20221212021627.3766829-1-liushixin2@huawei.com
Reported-by: syzbot+5b04b49a7ec7226c7426@syzkaller.appspotmail.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/hfs/bnode.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/hfs/bnode.c
+++ b/fs/hfs/bnode.c
@@ -274,6 +274,7 @@ static struct hfs_bnode *__hfs_bnode_cre
tree->node_hash[hash] = node;
tree->node_hash_cnt++;
} else {
+ hfs_bnode_get(node2);
spin_unlock(&tree->hash_lock);
kfree(node);
wait_event(node2->lock_wq, !test_bit(HFS_BNODE_NEW, &node2->flags));
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 690/885] fs: hfsplus: fix UAF issue in hfsplus_put_super
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (688 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 689/885] hfs: fix missing hfs_bnode_get() in __hfs_bnode_create Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 691/885] exfat: fix reporting fs error when reading dir beyond EOF Greg Kroah-Hartman
` (197 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+57e3e98f7e3b80f64d56,
Dongliang Mu, Bart Van Assche, Jens Axboe, Muchun Song,
Roman Gushchin, Theodore Tso, Andrew Morton
From: Dongliang Mu <mudongliangabcd@gmail.com>
commit 07db5e247ab5858439b14dd7cc1fe538b9efcf32 upstream.
The current hfsplus_put_super first calls hfs_btree_close on
sbi->ext_tree, then invokes iput on sbi->hidden_dir, resulting in an
use-after-free issue in hfsplus_release_folio.
As shown in hfsplus_fill_super, the error handling code also calls iput
before hfs_btree_close.
To fix this error, we move all iput calls before hfsplus_btree_close.
Note that this patch is tested on Syzbot.
Link: https://lkml.kernel.org/r/20230226124948.3175736-1-mudongliangabcd@gmail.com
Reported-by: syzbot+57e3e98f7e3b80f64d56@syzkaller.appspotmail.com
Tested-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/hfsplus/super.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -295,11 +295,11 @@ static void hfsplus_put_super(struct sup
hfsplus_sync_fs(sb, 1);
}
+ iput(sbi->alloc_file);
+ iput(sbi->hidden_dir);
hfs_btree_close(sbi->attr_tree);
hfs_btree_close(sbi->cat_tree);
hfs_btree_close(sbi->ext_tree);
- iput(sbi->alloc_file);
- iput(sbi->hidden_dir);
kfree(sbi->s_vhdr_buf);
kfree(sbi->s_backup_vhdr_buf);
unload_nls(sbi->nls);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 691/885] exfat: fix reporting fs error when reading dir beyond EOF
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (689 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 690/885] fs: hfsplus: fix UAF issue in hfsplus_put_super Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 692/885] exfat: fix unexpected EOF while reading dir Greg Kroah-Hartman
` (196 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuezhang Mo, Andy Wu, Aoyama Wataru,
Sungjong Seo, Namjae Jeon
From: Yuezhang Mo <Yuezhang.Mo@sony.com>
commit 706fdcac002316893434d753be8cfb549fe1d40d upstream.
Since seekdir() does not check whether the position is valid, the
position may exceed the size of the directory. We found that for
a directory with discontinuous clusters, if the position exceeds
the size of the directory and the excess size is greater than or
equal to the cluster size, exfat_readdir() will return -EIO,
causing a file system error and making the file system unavailable.
Reproduce this bug by:
seekdir(dir, dir_size + cluster_size);
dirent = readdir(dir);
The following log will be printed if mount with 'errors=remount-ro'.
[11166.712896] exFAT-fs (sdb1): error, invalid access to FAT (entry 0xffffffff)
[11166.712905] exFAT-fs (sdb1): Filesystem has been set read-only
Fixes: 1e5654de0f51 ("exfat: handle wrong stream entry size in exfat_readdir()")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/exfat/dir.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/exfat/dir.c
+++ b/fs/exfat/dir.c
@@ -102,7 +102,7 @@ static int exfat_readdir(struct inode *i
clu.dir = ei->hint_bmap.clu;
}
- while (clu_offset > 0) {
+ while (clu_offset > 0 && clu.dir != EXFAT_EOF_CLUSTER) {
if (exfat_get_next_cluster(sb, &(clu.dir)))
return -EIO;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 692/885] exfat: fix unexpected EOF while reading dir
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (690 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 691/885] exfat: fix reporting fs error when reading dir beyond EOF Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 693/885] exfat: redefine DIR_DELETED as the bad cluster number Greg Kroah-Hartman
` (195 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wang Yugui, Yuezhang Mo, Andy Wu,
Aoyama Wataru, Sungjong Seo, Namjae Jeon
From: Yuezhang Mo <Yuezhang.Mo@sony.com>
commit 6cb5d1a16a51d080fbc1649a5144cbc5ca7d6f88 upstream.
If the position is not aligned with the dentry size, the return
value of readdir() will be NULL and errno is 0, which means the
end of the directory stream is reached.
If the position is aligned with dentry size, but there is no file
or directory at the position, exfat_readdir() will continue to
get dentry from the next dentry. So the dentry gotten by readdir()
may not be at the position.
After this commit, if the position is not aligned with the dentry
size, round the position up to the dentry size and continue to get
the dentry.
Fixes: ca06197382bd ("exfat: add directory operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/exfat/dir.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/fs/exfat/dir.c
+++ b/fs/exfat/dir.c
@@ -236,10 +236,7 @@ static int exfat_iterate(struct file *fi
fake_offset = 1;
}
- if (cpos & (DENTRY_SIZE - 1)) {
- err = -ENOENT;
- goto unlock;
- }
+ cpos = round_up(cpos, DENTRY_SIZE);
/* name buffer should be allocated before use */
err = exfat_alloc_namebuf(nb);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 693/885] exfat: redefine DIR_DELETED as the bad cluster number
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (691 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 692/885] exfat: fix unexpected EOF while reading dir Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 694/885] exfat: fix inode->i_blocks for non-512 byte sector size device Greg Kroah-Hartman
` (194 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuezhang Mo, Sungjong Seo, Namjae Jeon
From: Sungjong Seo <sj1557.seo@samsung.com>
commit bdaadfd343e3cba49ad0b009ff4b148dad0fa404 upstream.
When a file or a directory is deleted, the hint for the cluster of
its parent directory in its in-memory inode is set as DIR_DELETED.
Therefore, DIR_DELETED must be one of invalid cluster numbers. According
to the exFAT specification, a volume can have at most 2^32-11 clusters.
However, DIR_DELETED is wrongly defined as 0xFFFF0321, which could be
a valid cluster number. To fix it, let's redefine DIR_DELETED as
0xFFFFFFF7, the bad cluster number.
Fixes: 1acf1a564b60 ("exfat: add in-memory and on-disk structures and headers")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/exfat/exfat_fs.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/exfat/exfat_fs.h
+++ b/fs/exfat/exfat_fs.h
@@ -41,7 +41,7 @@ enum {
#define ES_2_ENTRIES 2
#define ES_ALL_ENTRIES 0
-#define DIR_DELETED 0xFFFF0321
+#define DIR_DELETED 0xFFFFFFF7
/* type values */
#define TYPE_UNUSED 0x0000
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 694/885] exfat: fix inode->i_blocks for non-512 byte sector size device
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (692 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 693/885] exfat: redefine DIR_DELETED as the bad cluster number Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 695/885] fs: dlm: dont set stop rx flag after node reset Greg Kroah-Hartman
` (193 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wang Yugui, Yuezhang Mo, Andy Wu,
Namjae Jeon
From: Yuezhang Mo <Yuezhang.Mo@sony.com>
commit 39c1ce8eafc0ff64fb9e28536ccc7df6a8e2999d upstream.
inode->i_blocks is not real number of blocks, but 512 byte ones.
Fixes: 98d917047e8b ("exfat: add file operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/exfat/file.c | 3 +--
fs/exfat/inode.c | 6 ++----
fs/exfat/namei.c | 2 +-
fs/exfat/super.c | 3 +--
4 files changed, 5 insertions(+), 9 deletions(-)
--- a/fs/exfat/file.c
+++ b/fs/exfat/file.c
@@ -211,8 +211,7 @@ void exfat_truncate(struct inode *inode,
if (err)
goto write_size;
- inode->i_blocks = round_up(i_size_read(inode), sbi->cluster_size) >>
- inode->i_blkbits;
+ inode->i_blocks = round_up(i_size_read(inode), sbi->cluster_size) >> 9;
write_size:
aligned_size = i_size_read(inode);
if (aligned_size & (blocksize - 1)) {
--- a/fs/exfat/inode.c
+++ b/fs/exfat/inode.c
@@ -221,8 +221,7 @@ static int exfat_map_cluster(struct inod
num_clusters += num_to_be_allocated;
*clu = new_clu.dir;
- inode->i_blocks +=
- num_to_be_allocated << sbi->sect_per_clus_bits;
+ inode->i_blocks += EXFAT_CLU_TO_B(num_to_be_allocated, sbi) >> 9;
/*
* Move *clu pointer along FAT chains (hole care) because the
@@ -582,8 +581,7 @@ static int exfat_fill_inode(struct inode
exfat_save_attr(inode, info->attr);
- inode->i_blocks = round_up(i_size_read(inode), sbi->cluster_size) >>
- inode->i_blkbits;
+ inode->i_blocks = round_up(i_size_read(inode), sbi->cluster_size) >> 9;
inode->i_mtime = info->mtime;
inode->i_ctime = info->mtime;
ei->i_crtime = info->crtime;
--- a/fs/exfat/namei.c
+++ b/fs/exfat/namei.c
@@ -387,7 +387,7 @@ static int exfat_find_empty_entry(struct
ei->i_size_ondisk += sbi->cluster_size;
ei->i_size_aligned += sbi->cluster_size;
ei->flags = p_dir->flags;
- inode->i_blocks += 1 << sbi->sect_per_clus_bits;
+ inode->i_blocks += sbi->cluster_size >> 9;
}
return dentry;
--- a/fs/exfat/super.c
+++ b/fs/exfat/super.c
@@ -373,8 +373,7 @@ static int exfat_read_root(struct inode
inode->i_op = &exfat_dir_inode_operations;
inode->i_fop = &exfat_dir_operations;
- inode->i_blocks = round_up(i_size_read(inode), sbi->cluster_size) >>
- inode->i_blkbits;
+ inode->i_blocks = round_up(i_size_read(inode), sbi->cluster_size) >> 9;
ei->i_pos = ((loff_t)sbi->root_dir << 32) | 0xffffffff;
ei->i_size_aligned = i_size_read(inode);
ei->i_size_ondisk = i_size_read(inode);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 695/885] fs: dlm: dont set stop rx flag after node reset
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (693 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 694/885] exfat: fix inode->i_blocks for non-512 byte sector size device Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 696/885] fs: dlm: move sending fin message into state change handling Greg Kroah-Hartman
` (192 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Alexander Aring, David Teigland
From: Alexander Aring <aahringo@redhat.com>
commit 15c63db8e86a72e0d5cfb9bf0cd1870e39a3e5fe upstream.
Similar to the stop tx flag, the rx flag should warn about a dlm message
being received at DLM_FIN state change, when we are assuming no other
dlm application messages. If we receive a FIN message and we are in the
state DLM_FIN_WAIT2 we call midcomms_node_reset() which puts the
midcomms node into DLM_CLOSED state. Afterwards we should not set the
DLM_NODE_FLAG_STOP_RX flag any more. This patch changes the setting
DLM_NODE_FLAG_STOP_RX in those state changes when we receive a FIN
message and we assume there will be no other dlm application messages
received until we hit DLM_CLOSED state.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/dlm/midcomms.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/fs/dlm/midcomms.c
+++ b/fs/dlm/midcomms.c
@@ -509,6 +509,7 @@ static void dlm_midcomms_receive_buffer(
break;
case DLM_FIN_WAIT1:
node->state = DLM_CLOSING;
+ set_bit(DLM_NODE_FLAG_STOP_RX, &node->flags);
pr_debug("switch node %d to state %s\n",
node->nodeid, dlm_state_str(node->state));
break;
@@ -529,8 +530,6 @@ static void dlm_midcomms_receive_buffer(
return;
}
spin_unlock(&node->state_lock);
-
- set_bit(DLM_NODE_FLAG_STOP_RX, &node->flags);
break;
default:
WARN_ON(test_bit(DLM_NODE_FLAG_STOP_RX, &node->flags));
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 696/885] fs: dlm: move sending fin message into state change handling
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (694 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 695/885] fs: dlm: dont set stop rx flag after node reset Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 697/885] fs: dlm: send FIN ack back in right cases Greg Kroah-Hartman
` (191 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Alexander Aring, David Teigland
From: Alexander Aring <aahringo@redhat.com>
commit a58496361802070996f9bd76e941d109c4a85ebd upstream.
This patch moves the send fin handling, which should appear in a specific
state change, into the state change handling while the per node
state_lock is held. I experienced issues with other messages because
we changed the state and a fin message was sent out in a different state.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/dlm/midcomms.c | 33 +++++++++------------------------
1 file changed, 9 insertions(+), 24 deletions(-)
--- a/fs/dlm/midcomms.c
+++ b/fs/dlm/midcomms.c
@@ -401,7 +401,7 @@ static int dlm_send_fin(struct midcomms_
struct dlm_mhandle *mh;
char *ppc;
- mh = dlm_midcomms_get_mhandle(node->nodeid, mb_len, GFP_NOFS, &ppc);
+ mh = dlm_midcomms_get_mhandle(node->nodeid, mb_len, GFP_ATOMIC, &ppc);
if (!mh)
return -ENOMEM;
@@ -503,8 +503,8 @@ static void dlm_midcomms_receive_buffer(
node->state = DLM_LAST_ACK;
pr_debug("switch node %d to state %s case 1\n",
node->nodeid, dlm_state_str(node->state));
- spin_unlock(&node->state_lock);
- goto send_fin;
+ set_bit(DLM_NODE_FLAG_STOP_RX, &node->flags);
+ dlm_send_fin(node, dlm_pas_fin_ack_rcv);
}
break;
case DLM_FIN_WAIT1:
@@ -547,12 +547,6 @@ static void dlm_midcomms_receive_buffer(
log_print_ratelimited("ignore dlm msg because seq mismatch, seq: %u, expected: %u, nodeid: %d",
seq, node->seq_next, node->nodeid);
}
-
- return;
-
-send_fin:
- set_bit(DLM_NODE_FLAG_STOP_RX, &node->flags);
- dlm_send_fin(node, dlm_pas_fin_ack_rcv);
}
static struct midcomms_node *
@@ -1286,11 +1280,11 @@ void dlm_midcomms_remove_member(int node
case DLM_CLOSE_WAIT:
/* passive shutdown DLM_LAST_ACK case 2 */
node->state = DLM_LAST_ACK;
- spin_unlock(&node->state_lock);
-
pr_debug("switch node %d to state %s case 2\n",
node->nodeid, dlm_state_str(node->state));
- goto send_fin;
+ set_bit(DLM_NODE_FLAG_STOP_RX, &node->flags);
+ dlm_send_fin(node, dlm_pas_fin_ack_rcv);
+ break;
case DLM_LAST_ACK:
/* probably receive fin caught it, do nothing */
break;
@@ -1306,12 +1300,6 @@ void dlm_midcomms_remove_member(int node
spin_unlock(&node->state_lock);
srcu_read_unlock(&nodes_srcu, idx);
- return;
-
-send_fin:
- set_bit(DLM_NODE_FLAG_STOP_RX, &node->flags);
- dlm_send_fin(node, dlm_pas_fin_ack_rcv);
- srcu_read_unlock(&nodes_srcu, idx);
}
static void midcomms_node_release(struct rcu_head *rcu)
@@ -1342,6 +1330,7 @@ static void midcomms_shutdown(struct mid
node->state = DLM_FIN_WAIT1;
pr_debug("switch node %d to state %s case 2\n",
node->nodeid, dlm_state_str(node->state));
+ dlm_send_fin(node, dlm_act_fin_ack_rcv);
break;
case DLM_CLOSED:
/* we have what we want */
@@ -1355,12 +1344,8 @@ static void midcomms_shutdown(struct mid
}
spin_unlock(&node->state_lock);
- if (node->state == DLM_FIN_WAIT1) {
- dlm_send_fin(node, dlm_act_fin_ack_rcv);
-
- if (DLM_DEBUG_FENCE_TERMINATION)
- msleep(5000);
- }
+ if (DLM_DEBUG_FENCE_TERMINATION)
+ msleep(5000);
/* wait for other side dlm + fin */
ret = wait_event_timeout(node->shutdown_wait,
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 697/885] fs: dlm: send FIN ack back in right cases
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (695 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 696/885] fs: dlm: move sending fin message into state change handling Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 698/885] f2fs: fix information leak in f2fs_move_inline_dirents() Greg Kroah-Hartman
` (190 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Alexander Aring, David Teigland
From: Alexander Aring <aahringo@redhat.com>
commit 00908b3388255fc1d3782b744d07f327712f401f upstream.
This patch moves to send a ack back for receiving a FIN message only
when we are in valid states. In other cases and there might be a sender
waiting for a ack we just let it timeout at the senders time and
hopefully all other cleanups will remove the FIN message on their
sending queue. As an example we should never send out an ACK being in
LAST_ACK state or we cannot assume a working socket communication when
we are in CLOSED state.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/dlm/midcomms.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/fs/dlm/midcomms.c
+++ b/fs/dlm/midcomms.c
@@ -374,7 +374,7 @@ static int dlm_send_ack(int nodeid, uint
struct dlm_msg *msg;
char *ppc;
- msg = dlm_lowcomms_new_msg(nodeid, mb_len, GFP_NOFS, &ppc,
+ msg = dlm_lowcomms_new_msg(nodeid, mb_len, GFP_ATOMIC, &ppc,
NULL, NULL);
if (!msg)
return -ENOMEM;
@@ -483,15 +483,14 @@ static void dlm_midcomms_receive_buffer(
switch (p->header.h_cmd) {
case DLM_FIN:
- /* send ack before fin */
- dlm_send_ack(node->nodeid, node->seq_next);
-
spin_lock(&node->state_lock);
pr_debug("receive fin msg from node %d with state %s\n",
node->nodeid, dlm_state_str(node->state));
switch (node->state) {
case DLM_ESTABLISHED:
+ dlm_send_ack(node->nodeid, node->seq_next);
+
node->state = DLM_CLOSE_WAIT;
pr_debug("switch node %d to state %s\n",
node->nodeid, dlm_state_str(node->state));
@@ -508,12 +507,14 @@ static void dlm_midcomms_receive_buffer(
}
break;
case DLM_FIN_WAIT1:
+ dlm_send_ack(node->nodeid, node->seq_next);
node->state = DLM_CLOSING;
set_bit(DLM_NODE_FLAG_STOP_RX, &node->flags);
pr_debug("switch node %d to state %s\n",
node->nodeid, dlm_state_str(node->state));
break;
case DLM_FIN_WAIT2:
+ dlm_send_ack(node->nodeid, node->seq_next);
midcomms_node_reset(node);
pr_debug("switch node %d to state %s\n",
node->nodeid, dlm_state_str(node->state));
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 698/885] f2fs: fix information leak in f2fs_move_inline_dirents()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (696 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 697/885] fs: dlm: send FIN ack back in right cases Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 699/885] f2fs: retry to update the inode page given data corruption Greg Kroah-Hartman
` (189 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Eric Biggers, Chao Yu, Jaegeuk Kim
From: Eric Biggers <ebiggers@google.com>
commit 9a5571cff4ffcfc24847df9fd545cc5799ac0ee5 upstream.
When converting an inline directory to a regular one, f2fs is leaking
uninitialized memory to disk because it doesn't initialize the entire
directory block. Fix this by zero-initializing the block.
This bug was introduced by commit 4ec17d688d74 ("f2fs: avoid unneeded
initializing when converting inline dentry"), which didn't consider the
security implications of leaking uninitialized memory to disk.
This was found by running xfstest generic/435 on a KMSAN-enabled kernel.
Fixes: 4ec17d688d74 ("f2fs: avoid unneeded initializing when converting inline dentry")
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/f2fs/inline.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
--- a/fs/f2fs/inline.c
+++ b/fs/f2fs/inline.c
@@ -422,18 +422,17 @@ static int f2fs_move_inline_dirents(stru
dentry_blk = page_address(page);
+ /*
+ * Start by zeroing the full block, to ensure that all unused space is
+ * zeroed and no uninitialized memory is leaked to disk.
+ */
+ memset(dentry_blk, 0, F2FS_BLKSIZE);
+
make_dentry_ptr_inline(dir, &src, inline_dentry);
make_dentry_ptr_block(dir, &dst, dentry_blk);
/* copy data from inline dentry block to new dentry block */
memcpy(dst.bitmap, src.bitmap, src.nr_bitmap);
- memset(dst.bitmap + src.nr_bitmap, 0, dst.nr_bitmap - src.nr_bitmap);
- /*
- * we do not need to zero out remainder part of dentry and filename
- * field, since we have used bitmap for marking the usage status of
- * them, besides, we can also ignore copying/zeroing reserved space
- * of dentry block, because them haven't been used so far.
- */
memcpy(dst.dentry, src.dentry, SIZE_OF_DIR_ENTRY * src.max);
memcpy(dst.filename, src.filename, src.max * F2FS_SLOT_LEN);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 699/885] f2fs: retry to update the inode page given data corruption
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (697 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 698/885] f2fs: fix information leak in f2fs_move_inline_dirents() Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 700/885] f2fs: fix cgroup writeback accounting with fs-layer encryption Greg Kroah-Hartman
` (188 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Randall Huang, Chao Yu, Jaegeuk Kim
From: Jaegeuk Kim <jaegeuk@kernel.org>
commit 3aa51c61cb4a4dcb40df51ac61171e9ac5a35321 upstream.
If the storage gives a corrupted node block due to short power failure and
reset, f2fs stops the entire operations by setting the checkpoint failure flag.
Let's give more chances to live by re-issuing IOs for a while in such critical
path.
Cc: stable@vger.kernel.org
Suggested-by: Randall Huang <huangrandall@google.com>
Suggested-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/f2fs/inode.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -708,18 +708,19 @@ void f2fs_update_inode_page(struct inode
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct page *node_page;
+ int count = 0;
retry:
node_page = f2fs_get_node_page(sbi, inode->i_ino);
if (IS_ERR(node_page)) {
int err = PTR_ERR(node_page);
- if (err == -ENOMEM) {
- cond_resched();
+ /* The node block was truncated. */
+ if (err == -ENOENT)
+ return;
+
+ if (err == -ENOMEM || ++count <= DEFAULT_RETRY_IO_COUNT)
goto retry;
- } else if (err != -ENOENT) {
- f2fs_stop_checkpoint(sbi, false,
- STOP_CP_REASON_UPDATE_INODE);
- }
+ f2fs_stop_checkpoint(sbi, false, STOP_CP_REASON_UPDATE_INODE);
return;
}
f2fs_update_inode(inode, node_page);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 700/885] f2fs: fix cgroup writeback accounting with fs-layer encryption
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (698 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 699/885] f2fs: retry to update the inode page given data corruption Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 701/885] f2fs: fix kernel crash due to null io->bio Greg Kroah-Hartman
` (187 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Matthew Wilcox (Oracle),
Eric Biggers, Tejun Heo, Chao Yu, Jaegeuk Kim
From: Eric Biggers <ebiggers@google.com>
commit 844545c51a5b2a524b22a2fe9d0b353b827d24b4 upstream.
When writing a page from an encrypted file that is using
filesystem-layer encryption (not inline encryption), f2fs encrypts the
pagecache page into a bounce page, then writes the bounce page.
It also passes the bounce page to wbc_account_cgroup_owner(). That's
incorrect, because the bounce page is a newly allocated temporary page
that doesn't have the memory cgroup of the original pagecache page.
This makes wbc_account_cgroup_owner() not account the I/O to the owner
of the pagecache page as it should.
Fix this by always passing the pagecache page to
wbc_account_cgroup_owner().
Fixes: 578c647879f7 ("f2fs: implement cgroup writeback support")
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/f2fs/data.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -726,7 +726,7 @@ int f2fs_submit_page_bio(struct f2fs_io_
}
if (fio->io_wbc && !is_read_io(fio->op))
- wbc_account_cgroup_owner(fio->io_wbc, page, PAGE_SIZE);
+ wbc_account_cgroup_owner(fio->io_wbc, fio->page, PAGE_SIZE);
inc_page_count(fio->sbi, is_read_io(fio->op) ?
__read_io_type(page) : WB_DATA_TYPE(fio->page));
@@ -933,7 +933,7 @@ alloc_new:
}
if (fio->io_wbc)
- wbc_account_cgroup_owner(fio->io_wbc, page, PAGE_SIZE);
+ wbc_account_cgroup_owner(fio->io_wbc, fio->page, PAGE_SIZE);
inc_page_count(fio->sbi, WB_DATA_TYPE(page));
@@ -1007,7 +1007,7 @@ alloc_new:
}
if (fio->io_wbc)
- wbc_account_cgroup_owner(fio->io_wbc, bio_page, PAGE_SIZE);
+ wbc_account_cgroup_owner(fio->io_wbc, fio->page, PAGE_SIZE);
io->last_block_in_bio = fio->new_blkaddr;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 701/885] f2fs: fix kernel crash due to null io->bio
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (699 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 700/885] f2fs: fix cgroup writeback accounting with fs-layer encryption Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 702/885] ocfs2: fix defrag path triggering jbd2 ASSERT Greg Kroah-Hartman
` (186 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Chao Yu, Jaegeuk Kim
From: Jaegeuk Kim <jaegeuk@kernel.org>
commit 267c159f9c7bcb7009dae16889b880c5ed8759a8 upstream.
We should return when io->bio is null before doing anything. Otherwise, panic.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:__submit_merged_write_cond+0x164/0x240 [f2fs]
Call Trace:
<TASK>
f2fs_submit_merged_write+0x1d/0x30 [f2fs]
commit_checkpoint+0x110/0x1e0 [f2fs]
f2fs_write_checkpoint+0x9f7/0xf00 [f2fs]
? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs]
__checkpoint_and_complete_reqs+0x84/0x190 [f2fs]
? preempt_count_add+0x82/0xc0
? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs]
issue_checkpoint_thread+0x4c/0xf0 [f2fs]
? __pfx_autoremove_wake_function+0x10/0x10
kthread+0xff/0x130
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
Cc: stable@vger.kernel.org # v5.18+
Fixes: 64bf0eef0171 ("f2fs: pass the bio operation to bio_alloc_bioset")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/f2fs/data.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -640,6 +640,9 @@ static void __f2fs_submit_merged_write(s
f2fs_down_write(&io->io_rwsem);
+ if (!io->bio)
+ goto unlock_out;
+
/* change META to META_FLUSH in the checkpoint procedure */
if (type >= META_FLUSH) {
io->fio.type = META_FLUSH;
@@ -648,6 +651,7 @@ static void __f2fs_submit_merged_write(s
io->bio->bi_opf |= REQ_PREFLUSH | REQ_FUA;
}
__submit_merged_bio(io);
+unlock_out:
f2fs_up_write(&io->io_rwsem);
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 702/885] ocfs2: fix defrag path triggering jbd2 ASSERT
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (700 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 701/885] f2fs: fix kernel crash due to null io->bio Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 703/885] ocfs2: fix non-auto defrag path not working issue Greg Kroah-Hartman
` (185 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Heming Zhao, Joseph Qi, Mark Fasheh,
Joel Becker, Junxiao Bi, Changwei Ge, Gang He, Jun Piao,
Andrew Morton
From: Heming Zhao via Ocfs2-devel <ocfs2-devel@oss.oracle.com>
commit 60eed1e3d45045623e46944ebc7c42c30a4350f0 upstream.
code path:
ocfs2_ioctl_move_extents
ocfs2_move_extents
ocfs2_defrag_extent
__ocfs2_move_extent
+ ocfs2_journal_access_di
+ ocfs2_split_extent //sub-paths call jbd2_journal_restart
+ ocfs2_journal_dirty //crash by jbs2 ASSERT
crash stacks:
PID: 11297 TASK: ffff974a676dcd00 CPU: 67 COMMAND: "defragfs.ocfs2"
#0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01
#1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d
#2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d
#3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f
#4 [ffffb25d8dad3a58] do_trap at ffffffff83833205
#5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6
#6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18
[exception RIP: jbd2_journal_dirty_metadata+0x2ba]
RIP: ffffffffc09ca54a RSP: ffffb25d8dad3b70 RFLAGS: 00010207
RAX: 0000000000000000 RBX: ffff9706eedc5248 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff97337029ea28 RDI: ffff9706eedc5250
RBP: ffff9703c3520200 R8: 000000000f46b0b2 R9: 0000000000000000
R10: 0000000000000001 R11: 00000001000000fe R12: ffff97337029ea28
R13: 0000000000000000 R14: ffff9703de59bf60 R15: ffff9706eedc5250
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2]
#8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2]
#9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2]
Analysis
This bug has the same root cause of 'commit 7f27ec978b0e ("ocfs2: call
ocfs2_journal_access_di() before ocfs2_journal_dirty() in
ocfs2_write_end_nolock()")'. For this bug, jbd2_journal_restart() is
called by ocfs2_split_extent() during defragmenting.
How to fix
For ocfs2_split_extent() can handle journal operations totally by itself.
Caller doesn't need to call journal access/dirty pair, and caller only
needs to call journal start/stop pair. The fix method is to remove
journal access/dirty from __ocfs2_move_extent().
The discussion for this patch:
https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html
Link: https://lkml.kernel.org/r/20230217003717.32469-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ocfs2/move_extents.c | 10 ----------
1 file changed, 10 deletions(-)
--- a/fs/ocfs2/move_extents.c
+++ b/fs/ocfs2/move_extents.c
@@ -105,14 +105,6 @@ static int __ocfs2_move_extent(handle_t
*/
replace_rec.e_flags = ext_flags & ~OCFS2_EXT_REFCOUNTED;
- ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode),
- context->et.et_root_bh,
- OCFS2_JOURNAL_ACCESS_WRITE);
- if (ret) {
- mlog_errno(ret);
- goto out;
- }
-
ret = ocfs2_split_extent(handle, &context->et, path, index,
&replace_rec, context->meta_ac,
&context->dealloc);
@@ -121,8 +113,6 @@ static int __ocfs2_move_extent(handle_t
goto out;
}
- ocfs2_journal_dirty(handle, context->et.et_root_bh);
-
context->new_phys_cpos = new_p_cpos;
/*
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 703/885] ocfs2: fix non-auto defrag path not working issue
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (701 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 702/885] ocfs2: fix defrag path triggering jbd2 ASSERT Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 704/885] fs/cramfs/inode.c: initialize file_ra_state Greg Kroah-Hartman
` (184 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Heming Zhao, Joseph Qi, Mark Fasheh,
Joel Becker, Junxiao Bi, Changwei Ge, Gang He, Jun Piao,
Andrew Morton
From: Heming Zhao via Ocfs2-devel <ocfs2-devel@oss.oracle.com>
commit 236b9254f8d1edc273ad88b420aa85fbd84f492d upstream.
This fixes three issues on move extents ioctl without auto defrag:
a) In ocfs2_find_victim_alloc_group(), we have to convert bits to block
first in case of global bitmap.
b) In ocfs2_probe_alloc_group(), when finding enough bits in block
group bitmap, we have to back off move_len to start pos as well,
otherwise it may corrupt filesystem.
c) In ocfs2_ioctl_move_extents(), set me_threshold both for non-auto
and auto defrag paths. Otherwise it will set move_max_hop to 0 and
finally cause unexpectedly ENOSPC error.
Currently there are no tools triggering the above issues since
defragfs.ocfs2 enables auto defrag by default. Tested with manually
changing defragfs.ocfs2 to run non auto defrag path.
Link: https://lkml.kernel.org/r/20230220050526.22020-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ocfs2/move_extents.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
--- a/fs/ocfs2/move_extents.c
+++ b/fs/ocfs2/move_extents.c
@@ -434,7 +434,7 @@ static int ocfs2_find_victim_alloc_group
bg = (struct ocfs2_group_desc *)gd_bh->b_data;
if (vict_blkno < (le64_to_cpu(bg->bg_blkno) +
- le16_to_cpu(bg->bg_bits))) {
+ (le16_to_cpu(bg->bg_bits) << bits_per_unit))) {
*ret_bh = gd_bh;
*vict_bit = (vict_blkno - blkno) >>
@@ -549,6 +549,7 @@ static void ocfs2_probe_alloc_group(stru
last_free_bits++;
if (last_free_bits == move_len) {
+ i -= move_len;
*goal_bit = i;
*phys_cpos = base_cpos + i;
break;
@@ -1020,18 +1021,19 @@ int ocfs2_ioctl_move_extents(struct file
context->range = ⦥
+ /*
+ * ok, the default theshold for the defragmentation
+ * is 1M, since our maximum clustersize was 1M also.
+ * any thought?
+ */
+ if (!range.me_threshold)
+ range.me_threshold = 1024 * 1024;
+
+ if (range.me_threshold > i_size_read(inode))
+ range.me_threshold = i_size_read(inode);
+
if (range.me_flags & OCFS2_MOVE_EXT_FL_AUTO_DEFRAG) {
context->auto_defrag = 1;
- /*
- * ok, the default theshold for the defragmentation
- * is 1M, since our maximum clustersize was 1M also.
- * any thought?
- */
- if (!range.me_threshold)
- range.me_threshold = 1024 * 1024;
-
- if (range.me_threshold > i_size_read(inode))
- range.me_threshold = i_size_read(inode);
if (range.me_flags & OCFS2_MOVE_EXT_FL_PART_DEFRAG)
context->partial = 1;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 704/885] fs/cramfs/inode.c: initialize file_ra_state
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (702 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 703/885] ocfs2: fix non-auto defrag path not working issue Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 705/885] selftests/landlock: Skip overlayfs tests when not supported Greg Kroah-Hartman
` (183 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot, Matthew Wilcox,
Nicolas Pitre, Andrew Morton
From: Andrew Morton <akpm@linux-foundation.org>
commit 3e35102666f873a135d31a726ac1ec8af4905206 upstream.
file_ra_state_init() assumes that the file_ra_state has been zeroed out.
Fixes a KMSAN used-unintialized issue (at least).
Fixes: cf948cbc35e80 ("cramfs: read_mapping_page() is synchronous")
Reported-by: syzbot <syzbot+8ce7f8308d91e6b8bbe2@syzkaller.appspotmail.com>
Link: https://lkml.kernel.org/r/0000000000008f74e905f56df987@google.com
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cramfs/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c
index e3d168911dbe..006ef68d7ff6 100644
--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -183,7 +183,7 @@ static void *cramfs_blkdev_read(struct super_block *sb, unsigned int offset,
unsigned int len)
{
struct address_space *mapping = sb->s_bdev->bd_inode->i_mapping;
- struct file_ra_state ra;
+ struct file_ra_state ra = {};
struct page *pages[BLKS_PER_BUF];
unsigned i, blocknr, buffer;
unsigned long devsize;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 705/885] selftests/landlock: Skip overlayfs tests when not supported
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (703 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 704/885] fs/cramfs/inode.c: initialize file_ra_state Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 706/885] selftests/landlock: Test ptrace as much as possible with Yama Greg Kroah-Hartman
` (182 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jeff Xu, Guenter Roeck,
Mickaël Salaün
From: Jeff Xu <jeffxu@google.com>
commit 366617a69e60610912836570546f118006ebc7cb upstream.
overlayfs may be disabled in the kernel configuration, causing related
tests to fail. Check that overlayfs is supported at runtime, so we can
skip layout2_overlay.* accordingly.
Signed-off-by: Jeff Xu <jeffxu@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230113053229.1281774-2-jeffxu@google.com
[mic: Reword comments and constify variables]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/landlock/fs_test.c | 47 +++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
--- a/tools/testing/selftests/landlock/fs_test.c
+++ b/tools/testing/selftests/landlock/fs_test.c
@@ -11,6 +11,7 @@
#include <fcntl.h>
#include <linux/landlock.h>
#include <sched.h>
+#include <stdio.h>
#include <string.h>
#include <sys/capability.h>
#include <sys/mount.h>
@@ -87,6 +88,40 @@ static const char dir_s3d3[] = TMP_DIR "
* └── s3d3
*/
+static bool fgrep(FILE *const inf, const char *const str)
+{
+ char line[32];
+ const int slen = strlen(str);
+
+ while (!feof(inf)) {
+ if (!fgets(line, sizeof(line), inf))
+ break;
+ if (strncmp(line, str, slen))
+ continue;
+
+ return true;
+ }
+
+ return false;
+}
+
+static bool supports_overlayfs(void)
+{
+ bool res;
+ FILE *const inf = fopen("/proc/filesystems", "r");
+
+ /*
+ * Consider that the filesystem is supported if we cannot get the
+ * supported ones.
+ */
+ if (!inf)
+ return true;
+
+ res = fgrep(inf, "nodev\toverlay\n");
+ fclose(inf);
+ return res;
+}
+
static void mkdir_parents(struct __test_metadata *const _metadata,
const char *const path)
{
@@ -3539,6 +3574,9 @@ FIXTURE(layout2_overlay) {};
FIXTURE_SETUP(layout2_overlay)
{
+ if (!supports_overlayfs())
+ SKIP(return, "overlayfs is not supported");
+
prepare_layout(_metadata);
create_directory(_metadata, LOWER_BASE);
@@ -3575,6 +3613,9 @@ FIXTURE_SETUP(layout2_overlay)
FIXTURE_TEARDOWN(layout2_overlay)
{
+ if (!supports_overlayfs())
+ SKIP(return, "overlayfs is not supported");
+
EXPECT_EQ(0, remove_path(lower_do1_fl3));
EXPECT_EQ(0, remove_path(lower_dl1_fl2));
EXPECT_EQ(0, remove_path(lower_fl1));
@@ -3606,6 +3647,9 @@ FIXTURE_TEARDOWN(layout2_overlay)
TEST_F_FORK(layout2_overlay, no_restriction)
{
+ if (!supports_overlayfs())
+ SKIP(return, "overlayfs is not supported");
+
ASSERT_EQ(0, test_open(lower_fl1, O_RDONLY));
ASSERT_EQ(0, test_open(lower_dl1, O_RDONLY));
ASSERT_EQ(0, test_open(lower_dl1_fl2, O_RDONLY));
@@ -3769,6 +3813,9 @@ TEST_F_FORK(layout2_overlay, same_conten
size_t i;
const char *path_entry;
+ if (!supports_overlayfs())
+ SKIP(return, "overlayfs is not supported");
+
/* Sets rules on base directories (i.e. outside overlay scope). */
ruleset_fd = create_ruleset(_metadata, ACCESS_RW, layer1_base);
ASSERT_LE(0, ruleset_fd);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 706/885] selftests/landlock: Test ptrace as much as possible with Yama
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (704 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 705/885] selftests/landlock: Skip overlayfs tests when not supported Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 707/885] udf: Truncate added extents on failed expansion Greg Kroah-Hartman
` (181 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jeff Xu, Mickaël Salaün
From: Jeff Xu <jeffxu@google.com>
commit 8677e555f17f51321d0730b945aeb7d4b95f998f upstream.
Update ptrace tests according to all potential Yama security policies.
This is required to make such tests pass even if Yama is enabled.
Tests are not skipped but they now check both Landlock and Yama boundary
restrictions at run time to keep a maximum test coverage (i.e. positive
and negative testing).
Signed-off-by: Jeff Xu <jeffxu@google.com>
Link: https://lore.kernel.org/r/20230114020306.1407195-2-jeffxu@google.com
Cc: stable@vger.kernel.org
[mic: Add curly braces around EXPECT_EQ() to make it build, and improve
commit message]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/landlock/ptrace_test.c | 113 +++++++++++++++++++++----
1 file changed, 96 insertions(+), 17 deletions(-)
--- a/tools/testing/selftests/landlock/ptrace_test.c
+++ b/tools/testing/selftests/landlock/ptrace_test.c
@@ -19,6 +19,12 @@
#include "common.h"
+/* Copied from security/yama/yama_lsm.c */
+#define YAMA_SCOPE_DISABLED 0
+#define YAMA_SCOPE_RELATIONAL 1
+#define YAMA_SCOPE_CAPABILITY 2
+#define YAMA_SCOPE_NO_ATTACH 3
+
static void create_domain(struct __test_metadata *const _metadata)
{
int ruleset_fd;
@@ -60,6 +66,25 @@ static int test_ptrace_read(const pid_t
return 0;
}
+static int get_yama_ptrace_scope(void)
+{
+ int ret;
+ char buf[2] = {};
+ const int fd = open("/proc/sys/kernel/yama/ptrace_scope", O_RDONLY);
+
+ if (fd < 0)
+ return 0;
+
+ if (read(fd, buf, 1) < 0) {
+ close(fd);
+ return -1;
+ }
+
+ ret = atoi(buf);
+ close(fd);
+ return ret;
+}
+
/* clang-format off */
FIXTURE(hierarchy) {};
/* clang-format on */
@@ -232,8 +257,51 @@ TEST_F(hierarchy, trace)
pid_t child, parent;
int status, err_proc_read;
int pipe_child[2], pipe_parent[2];
+ int yama_ptrace_scope;
char buf_parent;
long ret;
+ bool can_read_child, can_trace_child, can_read_parent, can_trace_parent;
+
+ yama_ptrace_scope = get_yama_ptrace_scope();
+ ASSERT_LE(0, yama_ptrace_scope);
+
+ if (yama_ptrace_scope > YAMA_SCOPE_DISABLED)
+ TH_LOG("Incomplete tests due to Yama restrictions (scope %d)",
+ yama_ptrace_scope);
+
+ /*
+ * can_read_child is true if a parent process can read its child
+ * process, which is only the case when the parent process is not
+ * isolated from the child with a dedicated Landlock domain.
+ */
+ can_read_child = !variant->domain_parent;
+
+ /*
+ * can_trace_child is true if a parent process can trace its child
+ * process. This depends on two conditions:
+ * - The parent process is not isolated from the child with a dedicated
+ * Landlock domain.
+ * - Yama allows tracing children (up to YAMA_SCOPE_RELATIONAL).
+ */
+ can_trace_child = can_read_child &&
+ yama_ptrace_scope <= YAMA_SCOPE_RELATIONAL;
+
+ /*
+ * can_read_parent is true if a child process can read its parent
+ * process, which is only the case when the child process is not
+ * isolated from the parent with a dedicated Landlock domain.
+ */
+ can_read_parent = !variant->domain_child;
+
+ /*
+ * can_trace_parent is true if a child process can trace its parent
+ * process. This depends on two conditions:
+ * - The child process is not isolated from the parent with a dedicated
+ * Landlock domain.
+ * - Yama is disabled (YAMA_SCOPE_DISABLED).
+ */
+ can_trace_parent = can_read_parent &&
+ yama_ptrace_scope <= YAMA_SCOPE_DISABLED;
/*
* Removes all effective and permitted capabilities to not interfere
@@ -264,16 +332,21 @@ TEST_F(hierarchy, trace)
/* Waits for the parent to be in a domain, if any. */
ASSERT_EQ(1, read(pipe_parent[0], &buf_child, 1));
- /* Tests PTRACE_ATTACH and PTRACE_MODE_READ on the parent. */
+ /* Tests PTRACE_MODE_READ on the parent. */
err_proc_read = test_ptrace_read(parent);
+ if (can_read_parent) {
+ EXPECT_EQ(0, err_proc_read);
+ } else {
+ EXPECT_EQ(EACCES, err_proc_read);
+ }
+
+ /* Tests PTRACE_ATTACH on the parent. */
ret = ptrace(PTRACE_ATTACH, parent, NULL, 0);
- if (variant->domain_child) {
+ if (can_trace_parent) {
+ EXPECT_EQ(0, ret);
+ } else {
EXPECT_EQ(-1, ret);
EXPECT_EQ(EPERM, errno);
- EXPECT_EQ(EACCES, err_proc_read);
- } else {
- EXPECT_EQ(0, ret);
- EXPECT_EQ(0, err_proc_read);
}
if (ret == 0) {
ASSERT_EQ(parent, waitpid(parent, &status, 0));
@@ -283,11 +356,11 @@ TEST_F(hierarchy, trace)
/* Tests child PTRACE_TRACEME. */
ret = ptrace(PTRACE_TRACEME);
- if (variant->domain_parent) {
+ if (can_trace_child) {
+ EXPECT_EQ(0, ret);
+ } else {
EXPECT_EQ(-1, ret);
EXPECT_EQ(EPERM, errno);
- } else {
- EXPECT_EQ(0, ret);
}
/*
@@ -296,7 +369,7 @@ TEST_F(hierarchy, trace)
*/
ASSERT_EQ(1, write(pipe_child[1], ".", 1));
- if (!variant->domain_parent) {
+ if (can_trace_child) {
ASSERT_EQ(0, raise(SIGSTOP));
}
@@ -321,7 +394,7 @@ TEST_F(hierarchy, trace)
ASSERT_EQ(1, read(pipe_child[0], &buf_parent, 1));
/* Tests child PTRACE_TRACEME. */
- if (!variant->domain_parent) {
+ if (can_trace_child) {
ASSERT_EQ(child, waitpid(child, &status, 0));
ASSERT_EQ(1, WIFSTOPPED(status));
ASSERT_EQ(0, ptrace(PTRACE_DETACH, child, NULL, 0));
@@ -331,17 +404,23 @@ TEST_F(hierarchy, trace)
EXPECT_EQ(ESRCH, errno);
}
- /* Tests PTRACE_ATTACH and PTRACE_MODE_READ on the child. */
+ /* Tests PTRACE_MODE_READ on the child. */
err_proc_read = test_ptrace_read(child);
+ if (can_read_child) {
+ EXPECT_EQ(0, err_proc_read);
+ } else {
+ EXPECT_EQ(EACCES, err_proc_read);
+ }
+
+ /* Tests PTRACE_ATTACH on the child. */
ret = ptrace(PTRACE_ATTACH, child, NULL, 0);
- if (variant->domain_parent) {
+ if (can_trace_child) {
+ EXPECT_EQ(0, ret);
+ } else {
EXPECT_EQ(-1, ret);
EXPECT_EQ(EPERM, errno);
- EXPECT_EQ(EACCES, err_proc_read);
- } else {
- EXPECT_EQ(0, ret);
- EXPECT_EQ(0, err_proc_read);
}
+
if (ret == 0) {
ASSERT_EQ(child, waitpid(child, &status, 0));
ASSERT_EQ(1, WIFSTOPPED(status));
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 707/885] udf: Truncate added extents on failed expansion
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (705 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 706/885] selftests/landlock: Test ptrace as much as possible with Yama Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 708/885] udf: Do not bother merging very long extents Greg Kroah-Hartman
` (180 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jan Kara
From: Jan Kara <jack@suse.cz>
commit 70bfb3a8d661d4fdc742afc061b88a7f3fc9f500 upstream.
When a file expansion failed because we didn't have enough space for
indirect extents make sure we truncate extents created so far so that we
don't leave extents beyond EOF.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/udf/inode.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -526,8 +526,10 @@ static int udf_do_extend_file(struct ino
}
if (fake) {
- udf_add_aext(inode, last_pos, &last_ext->extLocation,
- last_ext->extLength, 1);
+ err = udf_add_aext(inode, last_pos, &last_ext->extLocation,
+ last_ext->extLength, 1);
+ if (err < 0)
+ goto out_err;
count++;
} else {
struct kernel_lb_addr tmploc;
@@ -561,7 +563,7 @@ static int udf_do_extend_file(struct ino
err = udf_add_aext(inode, last_pos, &last_ext->extLocation,
last_ext->extLength, 1);
if (err)
- return err;
+ goto out_err;
count++;
}
if (new_block_bytes) {
@@ -570,7 +572,7 @@ static int udf_do_extend_file(struct ino
err = udf_add_aext(inode, last_pos, &last_ext->extLocation,
last_ext->extLength, 1);
if (err)
- return err;
+ goto out_err;
count++;
}
@@ -584,6 +586,11 @@ out:
return -EIO;
return count;
+out_err:
+ /* Remove extents we've created so far */
+ udf_clear_extent_cache(inode);
+ udf_truncate_extents(inode);
+ return err;
}
/* Extend the final block of the file to final_block_len bytes */
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 708/885] udf: Do not bother merging very long extents
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (706 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 707/885] udf: Truncate added extents on failed expansion Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 709/885] udf: Do not update file length for failed writes to inline files Greg Kroah-Hartman
` (179 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, syzbot+60f291a24acecb3c2bd5, Jan Kara
From: Jan Kara <jack@suse.cz>
commit 53cafe1d6d8ef9f93318e5bfccc0d24f27d41ced upstream.
When merging very long extents we try to push as much length as possible
to the first extent. However this is unnecessarily complicated and not
really worth the trouble. Furthermore there was a bug in the logic
resulting in corrupting extents in the file as syzbot reproducer shows.
So just don't bother with the merging of extents that are too long
together.
CC: stable@vger.kernel.org
Reported-by: syzbot+60f291a24acecb3c2bd5@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/udf/inode.c | 19 ++-----------------
1 file changed, 2 insertions(+), 17 deletions(-)
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -1094,23 +1094,8 @@ static void udf_merge_extents(struct ino
blocksize - 1) >> blocksize_bits)))) {
if (((li->extLength & UDF_EXTENT_LENGTH_MASK) +
- (lip1->extLength & UDF_EXTENT_LENGTH_MASK) +
- blocksize - 1) & ~UDF_EXTENT_LENGTH_MASK) {
- lip1->extLength = (lip1->extLength -
- (li->extLength &
- UDF_EXTENT_LENGTH_MASK) +
- UDF_EXTENT_LENGTH_MASK) &
- ~(blocksize - 1);
- li->extLength = (li->extLength &
- UDF_EXTENT_FLAG_MASK) +
- (UDF_EXTENT_LENGTH_MASK + 1) -
- blocksize;
- lip1->extLocation.logicalBlockNum =
- li->extLocation.logicalBlockNum +
- ((li->extLength &
- UDF_EXTENT_LENGTH_MASK) >>
- blocksize_bits);
- } else {
+ (lip1->extLength & UDF_EXTENT_LENGTH_MASK) +
+ blocksize - 1) <= UDF_EXTENT_LENGTH_MASK) {
li->extLength = lip1->extLength +
(((li->extLength &
UDF_EXTENT_LENGTH_MASK) +
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 709/885] udf: Do not update file length for failed writes to inline files
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (707 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 708/885] udf: Do not bother merging very long extents Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 710/885] udf: Preserve link count of system files Greg Kroah-Hartman
` (178 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, syzbot+0937935b993956ba28ab, Jan Kara
From: Jan Kara <jack@suse.cz>
commit 256fe4162f8b5a1625b8603ca5f7ff79725bfb47 upstream.
When write to inline file fails (or happens only partly), we still
updated length of inline data as if the whole write succeeded. Fix the
update of length of inline data to happen only if the write succeeds.
Reported-by: syzbot+0937935b993956ba28ab@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/udf/file.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -149,26 +149,24 @@ static ssize_t udf_file_write_iter(struc
goto out;
down_write(&iinfo->i_data_sem);
- if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
- loff_t end = iocb->ki_pos + iov_iter_count(from);
-
- if (inode->i_sb->s_blocksize <
- (udf_file_entry_alloc_offset(inode) + end)) {
- err = udf_expand_file_adinicb(inode);
- if (err) {
- inode_unlock(inode);
- udf_debug("udf_expand_adinicb: err=%d\n", err);
- return err;
- }
- } else {
- iinfo->i_lenAlloc = max(end, inode->i_size);
- up_write(&iinfo->i_data_sem);
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB &&
+ inode->i_sb->s_blocksize < (udf_file_entry_alloc_offset(inode) +
+ iocb->ki_pos + iov_iter_count(from))) {
+ err = udf_expand_file_adinicb(inode);
+ if (err) {
+ inode_unlock(inode);
+ udf_debug("udf_expand_adinicb: err=%d\n", err);
+ return err;
}
} else
up_write(&iinfo->i_data_sem);
retval = __generic_file_write_iter(iocb, from);
out:
+ down_write(&iinfo->i_data_sem);
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB && retval > 0)
+ iinfo->i_lenAlloc = inode->i_size;
+ up_write(&iinfo->i_data_sem);
inode_unlock(inode);
if (retval > 0) {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 710/885] udf: Preserve link count of system files
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (708 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 709/885] udf: Do not update file length for failed writes to inline files Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 711/885] udf: Detect system inodes linked into directory hierarchy Greg Kroah-Hartman
` (177 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jan Kara
From: Jan Kara <jack@suse.cz>
commit fc8033a34a3ca7d23353e645e6dde5d364ac5f12 upstream.
System files in UDF filesystem have link count 0. To not confuse VFS we
fudge the link count to be 1 when reading such inodes however we forget
to restore the link count of 0 when writing such inodes. Fix that.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/udf/inode.c | 9 +++++++--
fs/udf/super.c | 1 +
fs/udf/udf_i.h | 3 ++-
3 files changed, 10 insertions(+), 3 deletions(-)
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -1380,6 +1380,7 @@ reread:
ret = -EIO;
goto out;
}
+ iinfo->i_hidden = hidden_inode;
iinfo->i_unique = 0;
iinfo->i_lenEAttr = 0;
iinfo->i_lenExtents = 0;
@@ -1715,8 +1716,12 @@ static int udf_update_inode(struct inode
if (S_ISDIR(inode->i_mode) && inode->i_nlink > 0)
fe->fileLinkCount = cpu_to_le16(inode->i_nlink - 1);
- else
- fe->fileLinkCount = cpu_to_le16(inode->i_nlink);
+ else {
+ if (iinfo->i_hidden)
+ fe->fileLinkCount = cpu_to_le16(0);
+ else
+ fe->fileLinkCount = cpu_to_le16(inode->i_nlink);
+ }
fe->informationLength = cpu_to_le64(inode->i_size);
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -147,6 +147,7 @@ static struct inode *udf_alloc_inode(str
ei->i_next_alloc_goal = 0;
ei->i_strat4096 = 0;
ei->i_streamdir = 0;
+ ei->i_hidden = 0;
init_rwsem(&ei->i_data_sem);
ei->cached_extent.lstart = -1;
spin_lock_init(&ei->i_extent_cache_lock);
--- a/fs/udf/udf_i.h
+++ b/fs/udf/udf_i.h
@@ -44,7 +44,8 @@ struct udf_inode_info {
unsigned i_use : 1; /* unallocSpaceEntry */
unsigned i_strat4096 : 1;
unsigned i_streamdir : 1;
- unsigned reserved : 25;
+ unsigned i_hidden : 1; /* hidden system inode */
+ unsigned reserved : 24;
__u8 *i_data;
struct kernel_lb_addr i_locStreamdir;
__u64 i_lenStreams;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 711/885] udf: Detect system inodes linked into directory hierarchy
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (709 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 710/885] udf: Preserve link count of system files Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 712/885] udf: Fix file corruption when appending just after end of preallocated extent Greg Kroah-Hartman
` (176 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, syzbot+38695a20b8addcbc1084, Jan Kara
From: Jan Kara <jack@suse.cz>
commit 85a37983ec69cc9fcd188bc37c4de15ee326355a upstream.
When UDF filesystem is corrupted, hidden system inodes can be linked
into directory hierarchy which is an avenue for further serious
corruption of the filesystem and kernel confusion as noticed by syzbot
fuzzed images. Refuse to access system inodes linked into directory
hierarchy and vice versa.
CC: stable@vger.kernel.org
Reported-by: syzbot+38695a20b8addcbc1084@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/udf/inode.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -1892,8 +1892,13 @@ struct inode *__udf_iget(struct super_bl
if (!inode)
return ERR_PTR(-ENOMEM);
- if (!(inode->i_state & I_NEW))
+ if (!(inode->i_state & I_NEW)) {
+ if (UDF_I(inode)->i_hidden != hidden_inode) {
+ iput(inode);
+ return ERR_PTR(-EFSCORRUPTED);
+ }
return inode;
+ }
memcpy(&UDF_I(inode)->i_location, ino, sizeof(struct kernel_lb_addr));
err = udf_read_inode(inode, hidden_inode);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 712/885] udf: Fix file corruption when appending just after end of preallocated extent
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (710 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 711/885] udf: Detect system inodes linked into directory hierarchy Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 713/885] md: dont update recovery_cp when curr_resync is ACTIVE Greg Kroah-Hartman
` (175 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jan Kara
From: Jan Kara <jack@suse.cz>
commit 36ec52ea038b18a53e198116ef7d7e70c87db046 upstream.
When we append new block just after the end of preallocated extent, the
code in inode_getblk() wrongly determined we're going to use the
preallocated extent which resulted in adding block into a wrong logical
offset in the file. Sequence like this manifests it:
xfs_io -f -c "pwrite 0x2cacf 0xd122" -c "truncate 0x2dd6f" \
-c "pwrite 0x27fd9 0x69a9" -c "pwrite 0x32981 0x7244" <file>
The code that determined the use of preallocated extent is actually
stale because udf_do_extend_file() does not create preallocation anymore
so after calling that function we are sure there's no usable
preallocation. Just remove the faulty condition.
CC: stable@vger.kernel.org
Fixes: 16d055656814 ("udf: Discard preallocation before extending file with a hole")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/udf/inode.c | 24 +++++++++++-------------
1 file changed, 11 insertions(+), 13 deletions(-)
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -805,19 +805,17 @@ static sector_t inode_getblk(struct inod
c = 0;
offset = 0;
count += ret;
- /* We are not covered by a preallocated extent? */
- if ((laarr[0].extLength & UDF_EXTENT_FLAG_MASK) !=
- EXT_NOT_RECORDED_ALLOCATED) {
- /* Is there any real extent? - otherwise we overwrite
- * the fake one... */
- if (count)
- c = !c;
- laarr[c].extLength = EXT_NOT_RECORDED_NOT_ALLOCATED |
- inode->i_sb->s_blocksize;
- memset(&laarr[c].extLocation, 0x00,
- sizeof(struct kernel_lb_addr));
- count++;
- }
+ /*
+ * Is there any real extent? - otherwise we overwrite the fake
+ * one...
+ */
+ if (count)
+ c = !c;
+ laarr[c].extLength = EXT_NOT_RECORDED_NOT_ALLOCATED |
+ inode->i_sb->s_blocksize;
+ memset(&laarr[c].extLocation, 0x00,
+ sizeof(struct kernel_lb_addr));
+ count++;
endnum = c + 1;
lastblock = 1;
} else {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 713/885] md: dont update recovery_cp when curr_resync is ACTIVE
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (711 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 712/885] udf: Fix file corruption when appending just after end of preallocated extent Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 714/885] RDMA/siw: Fix user page pinning accounting Greg Kroah-Hartman
` (174 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Hou Tao, Logan Gunthorpe, Song Liu
From: Hou Tao <houtao1@huawei.com>
commit 1d1f25bfda432a6b61bd0205d426226bbbd73504 upstream.
Don't update recovery_cp when curr_resync is MD_RESYNC_ACTIVE, otherwise
md may skip the resync of the first 3 sectors if the resync procedure is
interrupted before the first calling of ->sync_request() as shown below:
md_do_sync thread control thread
// setup resync
mddev->recovery_cp = 0
j = 0
mddev->curr_resync = MD_RESYNC_ACTIVE
// e.g., set array as idle
set_bit(MD_RECOVERY_INTR, &&mddev_recovery)
// resync loop
// check INTR before calling sync_request
!test_bit(MD_RECOVERY_INTR, &mddev->recovery
// resync interrupted
// update recovery_cp from 0 to 3
// the resync of three 3 sectors will be skipped
mddev->recovery_cp = 3
Fixes: eac58d08d493 ("md: Use enum for overloaded magic numbers used by mddev->curr_resync")
Cc: stable@vger.kernel.org # 6.0+
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/md.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -9039,7 +9039,7 @@ void md_do_sync(struct md_thread *thread
mddev->pers->sync_request(mddev, max_sectors, &skipped);
if (!test_bit(MD_RECOVERY_CHECK, &mddev->recovery) &&
- mddev->curr_resync >= MD_RESYNC_ACTIVE) {
+ mddev->curr_resync > MD_RESYNC_ACTIVE) {
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
if (mddev->curr_resync >= mddev->recovery_cp) {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 714/885] RDMA/siw: Fix user page pinning accounting
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (712 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 713/885] md: dont update recovery_cp when curr_resync is ACTIVE Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 715/885] KVM: Destroy target device if coalesced MMIO unregistration fails Greg Kroah-Hartman
` (173 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jason Gunthorpe, Alistair Popple,
Bernard Metzler, Leon Romanovsky, Sasha Levin
From: Bernard Metzler <bmt@zurich.ibm.com>
[ Upstream commit 65a8fc30fb6722fc25adec6d7dd5b53b0bb85820 ]
To avoid racing with other user memory reservations, immediately
account full amount of pages to be pinned.
Fixes: 2251334dcac9 ("rdma/siw: application buffer management")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20230202101000.402990-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/sw/siw/siw_mem.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/infiniband/sw/siw/siw_mem.c b/drivers/infiniband/sw/siw/siw_mem.c
index 61c17db70d658..bf69566e2eb63 100644
--- a/drivers/infiniband/sw/siw/siw_mem.c
+++ b/drivers/infiniband/sw/siw/siw_mem.c
@@ -398,7 +398,7 @@ struct siw_umem *siw_umem_get(u64 start, u64 len, bool writable)
mlock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
- if (num_pages + atomic64_read(&mm_s->pinned_vm) > mlock_limit) {
+ if (atomic64_add_return(num_pages, &mm_s->pinned_vm) > mlock_limit) {
rv = -ENOMEM;
goto out_sem_up;
}
@@ -411,18 +411,16 @@ struct siw_umem *siw_umem_get(u64 start, u64 len, bool writable)
goto out_sem_up;
}
for (i = 0; num_pages; i++) {
- int got, nents = min_t(int, num_pages, PAGES_PER_CHUNK);
-
- umem->page_chunk[i].plist =
+ int nents = min_t(int, num_pages, PAGES_PER_CHUNK);
+ struct page **plist =
kcalloc(nents, sizeof(struct page *), GFP_KERNEL);
- if (!umem->page_chunk[i].plist) {
+
+ if (!plist) {
rv = -ENOMEM;
goto out_sem_up;
}
- got = 0;
+ umem->page_chunk[i].plist = plist;
while (nents) {
- struct page **plist = &umem->page_chunk[i].plist[got];
-
rv = pin_user_pages(first_page_va, nents,
foll_flags | FOLL_LONGTERM,
plist, NULL);
@@ -430,12 +428,11 @@ struct siw_umem *siw_umem_get(u64 start, u64 len, bool writable)
goto out_sem_up;
umem->num_pages += rv;
- atomic64_add(rv, &mm_s->pinned_vm);
first_page_va += rv * PAGE_SIZE;
+ plist += rv;
nents -= rv;
- got += rv;
+ num_pages -= rv;
}
- num_pages -= got;
}
out_sem_up:
mmap_read_unlock(mm_s);
@@ -443,6 +440,10 @@ struct siw_umem *siw_umem_get(u64 start, u64 len, bool writable)
if (rv > 0)
return umem;
+ /* Adjust accounting for pages not pinned */
+ if (num_pages)
+ atomic64_sub(num_pages, &mm_s->pinned_vm);
+
siw_umem_release(umem, false);
return ERR_PTR(rv);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 715/885] KVM: Destroy target device if coalesced MMIO unregistration fails
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (713 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 714/885] RDMA/siw: Fix user page pinning accounting Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 716/885] KVM: VMX: Fix crash due to uninitialized current_vmcs Greg Kroah-Hartman
` (172 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, 柳菁峰,
Michal Luczaj, Sean Christopherson
From: Sean Christopherson <seanjc@google.com>
commit b1cb1fac22abf102ffeb29dd3eeca208a3869d54 upstream.
Destroy and free the target coalesced MMIO device if unregistering said
device fails. As clearly noted in the code, kvm_io_bus_unregister_dev()
does not destroy the target device.
BUG: memory leak
unreferenced object 0xffff888112a54880 (size 64):
comm "syz-executor.2", pid 5258, jiffies 4297861402 (age 14.129s)
hex dump (first 32 bytes):
38 c7 67 15 00 c9 ff ff 38 c7 67 15 00 c9 ff ff 8.g.....8.g.....
e0 c7 e1 83 ff ff ff ff 00 30 67 15 00 c9 ff ff .........0g.....
backtrace:
[<0000000006995a8a>] kmalloc include/linux/slab.h:556 [inline]
[<0000000006995a8a>] kzalloc include/linux/slab.h:690 [inline]
[<0000000006995a8a>] kvm_vm_ioctl_register_coalesced_mmio+0x8e/0x3d0 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:150
[<00000000022550c2>] kvm_vm_ioctl+0x47d/0x1600 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3323
[<000000008a75102f>] vfs_ioctl fs/ioctl.c:46 [inline]
[<000000008a75102f>] file_ioctl fs/ioctl.c:509 [inline]
[<000000008a75102f>] do_vfs_ioctl+0xbab/0x1160 fs/ioctl.c:696
[<0000000080e3f669>] ksys_ioctl+0x76/0xa0 fs/ioctl.c:713
[<0000000059ef4888>] __do_sys_ioctl fs/ioctl.c:720 [inline]
[<0000000059ef4888>] __se_sys_ioctl fs/ioctl.c:718 [inline]
[<0000000059ef4888>] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718
[<000000006444fa05>] do_syscall_64+0x9f/0x4e0 arch/x86/entry/common.c:290
[<000000009a4ed50b>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
BUG: leak checking failed
Fixes: 5d3c4c79384a ("KVM: Stop looking for coalesced MMIO zones if the bus is destroyed")
Cc: stable@vger.kernel.org
Reported-by: 柳菁峰 <liujingfeng@qianxin.com>
Reported-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20221219171924.67989-1-seanjc@google.com
Link: https://lore.kernel.org/all/20230118220003.1239032-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
virt/kvm/coalesced_mmio.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/virt/kvm/coalesced_mmio.c
+++ b/virt/kvm/coalesced_mmio.c
@@ -187,15 +187,17 @@ int kvm_vm_ioctl_unregister_coalesced_mm
r = kvm_io_bus_unregister_dev(kvm,
zone->pio ? KVM_PIO_BUS : KVM_MMIO_BUS, &dev->dev);
+ kvm_iodevice_destructor(&dev->dev);
+
/*
* On failure, unregister destroys all devices on the
* bus _except_ the target device, i.e. coalesced_zones
- * has been modified. No need to restart the walk as
- * there aren't any zones left.
+ * has been modified. Bail after destroying the target
+ * device, there's no need to restart the walk as there
+ * aren't any zones left.
*/
if (r)
break;
- kvm_iodevice_destructor(&dev->dev);
}
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 716/885] KVM: VMX: Fix crash due to uninitialized current_vmcs
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (714 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 715/885] KVM: Destroy target device if coalesced MMIO unregistration fails Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 717/885] KVM: Register /dev/kvm as the _very_ last thing during initialization Greg Kroah-Hartman
` (171 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Sean Christopherson, Alexandru Matei
From: Alexandru Matei <alexandru.matei@uipath.com>
commit 93827a0a36396f2fd6368a54a020f420c8916e9b upstream.
KVM enables 'Enlightened VMCS' and 'Enlightened MSR Bitmap' when running as
a nested hypervisor on top of Hyper-V. When MSR bitmap is updated,
evmcs_touch_msr_bitmap function uses current_vmcs per-cpu variable to mark
that the msr bitmap was changed.
vmx_vcpu_create() modifies the msr bitmap via vmx_disable_intercept_for_msr
-> vmx_msr_bitmap_l01_changed which in the end calls this function. The
function checks for current_vmcs if it is null but the check is
insufficient because current_vmcs is not initialized. Because of this, the
code might incorrectly write to the structure pointed by current_vmcs value
left by another task. Preemption is not disabled, the current task can be
preempted and moved to another CPU while current_vmcs is accessed multiple
times from evmcs_touch_msr_bitmap() which leads to crash.
The manipulation of MSR bitmaps by callers happens only for vmcs01 so the
solution is to use vmx->vmcs01.vmcs instead of current_vmcs.
BUG: kernel NULL pointer dereference, address: 0000000000000338
PGD 4e1775067 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
...
RIP: 0010:vmx_msr_bitmap_l01_changed+0x39/0x50 [kvm_intel]
...
Call Trace:
vmx_disable_intercept_for_msr+0x36/0x260 [kvm_intel]
vmx_vcpu_create+0xe6/0x540 [kvm_intel]
kvm_arch_vcpu_create+0x1d1/0x2e0 [kvm]
kvm_vm_ioctl_create_vcpu+0x178/0x430 [kvm]
kvm_vm_ioctl+0x53f/0x790 [kvm]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x5c/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: ceef7d10dfb6 ("KVM: x86: VMX: hyper-v: Enlightened MSR-Bitmap support")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Link: https://lore.kernel.org/r/20230123221208.4964-1-alexandru.matei@uipath.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/vmx/evmcs.h | 11 -----------
arch/x86/kvm/vmx/vmx.c | 9 +++++++--
2 files changed, 7 insertions(+), 13 deletions(-)
--- a/arch/x86/kvm/vmx/evmcs.h
+++ b/arch/x86/kvm/vmx/evmcs.h
@@ -188,16 +188,6 @@ static inline u16 evmcs_read16(unsigned
return *(u16 *)((char *)current_evmcs + offset);
}
-static inline void evmcs_touch_msr_bitmap(void)
-{
- if (unlikely(!current_evmcs))
- return;
-
- if (current_evmcs->hv_enlightenments_control.msr_bitmap)
- current_evmcs->hv_clean_fields &=
- ~HV_VMX_ENLIGHTENED_CLEAN_FIELD_MSR_BITMAP;
-}
-
static inline void evmcs_load(u64 phys_addr)
{
struct hv_vp_assist_page *vp_ap =
@@ -217,7 +207,6 @@ static inline u64 evmcs_read64(unsigned
static inline u32 evmcs_read32(unsigned long field) { return 0; }
static inline u16 evmcs_read16(unsigned long field) { return 0; }
static inline void evmcs_load(u64 phys_addr) {}
-static inline void evmcs_touch_msr_bitmap(void) {}
#endif /* IS_ENABLED(CONFIG_HYPERV) */
#define EVMPTR_INVALID (-1ULL)
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -3839,8 +3839,13 @@ static void vmx_msr_bitmap_l01_changed(s
* 'Enlightened MSR Bitmap' feature L0 needs to know that MSR
* bitmap has changed.
*/
- if (static_branch_unlikely(&enable_evmcs))
- evmcs_touch_msr_bitmap();
+ if (IS_ENABLED(CONFIG_HYPERV) && static_branch_unlikely(&enable_evmcs)) {
+ struct hv_enlightened_vmcs *evmcs = (void *)vmx->vmcs01.vmcs;
+
+ if (evmcs->hv_enlightenments_control.msr_bitmap)
+ evmcs->hv_clean_fields &=
+ ~HV_VMX_ENLIGHTENED_CLEAN_FIELD_MSR_BITMAP;
+ }
vmx->nested.force_msr_bitmap_recalc = true;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 717/885] KVM: Register /dev/kvm as the _very_ last thing during initialization
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (715 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 716/885] KVM: VMX: Fix crash due to uninitialized current_vmcs Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 718/885] KVM: x86: Purge "highest ISR" cache when updating APICv state Greg Kroah-Hartman
` (170 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit 2b01281273738bf2d6551da48d65db2df3f28998 upstream.
Register /dev/kvm, i.e. expose KVM to userspace, only after all other
setup has completed. Once /dev/kvm is exposed, userspace can start
invoking KVM ioctls, creating VMs, etc... If userspace creates a VM
before KVM is done with its configuration, bad things may happen, e.g.
KVM will fail to properly migrate vCPU state if a VM is created before
KVM has registered preemption notifiers.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
virt/kvm/kvm_main.c | 31 ++++++++++++++++++++++---------
1 file changed, 22 insertions(+), 9 deletions(-)
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -5935,12 +5935,6 @@ int kvm_init(void *opaque, unsigned vcpu
kvm_chardev_ops.owner = module;
- r = misc_register(&kvm_dev);
- if (r) {
- pr_err("kvm: misc device register failed\n");
- goto out_unreg;
- }
-
register_syscore_ops(&kvm_syscore_ops);
kvm_preempt_ops.sched_in = kvm_sched_in;
@@ -5949,11 +5943,24 @@ int kvm_init(void *opaque, unsigned vcpu
kvm_init_debug();
r = kvm_vfio_ops_init();
- WARN_ON(r);
+ if (WARN_ON_ONCE(r))
+ goto err_vfio;
+
+ /*
+ * Registration _must_ be the very last thing done, as this exposes
+ * /dev/kvm to userspace, i.e. all infrastructure must be setup!
+ */
+ r = misc_register(&kvm_dev);
+ if (r) {
+ pr_err("kvm: misc device register failed\n");
+ goto err_register;
+ }
return 0;
-out_unreg:
+err_register:
+ kvm_vfio_ops_exit();
+err_vfio:
kvm_async_pf_deinit();
out_free_4:
for_each_possible_cpu(cpu)
@@ -5979,8 +5986,14 @@ void kvm_exit(void)
{
int cpu;
- debugfs_remove_recursive(kvm_debugfs_dir);
+ /*
+ * Note, unregistering /dev/kvm doesn't strictly need to come first,
+ * fops_get(), a.k.a. try_module_get(), prevents acquiring references
+ * to KVM while the module is being stopped.
+ */
misc_deregister(&kvm_dev);
+
+ debugfs_remove_recursive(kvm_debugfs_dir);
for_each_possible_cpu(cpu)
free_cpumask_var(per_cpu(cpu_kick_mask, cpu));
kmem_cache_destroy(kvm_vcpu_cache);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 718/885] KVM: x86: Purge "highest ISR" cache when updating APICv state
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (716 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 717/885] KVM: Register /dev/kvm as the _very_ last thing during initialization Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 719/885] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Greg Kroah-Hartman
` (169 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Suravee Suthikulpanit,
Maxim Levitsky, Paolo Bonzini, Sean Christopherson
From: Sean Christopherson <seanjc@google.com>
commit 97a71c444a147ae41c7d0ab5b3d855d7f762f3ed upstream.
Purge the "highest ISR" cache when updating APICv state on a vCPU. The
cache must not be used when APICv is active as hardware may emulate EOIs
(and other operations) without exiting to KVM.
This fixes a bug where KVM will effectively block IRQs in perpetuity due
to the "highest ISR" never getting reset if APICv is activated on a vCPU
while an IRQ is in-service. Hardware emulates the EOI and KVM never gets
a chance to update its cache.
Fixes: b26a695a1d78 ("kvm: lapic: Introduce APICv update helper function")
Cc: stable@vger.kernel.org
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/lapic.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2429,6 +2429,7 @@ void kvm_apic_update_apicv(struct kvm_vc
*/
apic->isr_count = count_vectors(apic->regs + APIC_ISR);
}
+ apic->highest_isr_cache = -1;
}
EXPORT_SYMBOL_GPL(kvm_apic_update_apicv);
@@ -2485,7 +2486,6 @@ void kvm_lapic_reset(struct kvm_vcpu *vc
kvm_lapic_set_reg(apic, APIC_TMR + 0x10 * i, 0);
}
kvm_apic_update_apicv(vcpu);
- apic->highest_isr_cache = -1;
update_divide_count(apic);
atomic_set(&apic->lapic_timer.pending, 0);
@@ -2773,7 +2773,6 @@ int kvm_apic_set_state(struct kvm_vcpu *
__start_apic_timer(apic, APIC_TMCCT);
kvm_lapic_set_reg(apic, APIC_TMCCT, 0);
kvm_apic_update_apicv(vcpu);
- apic->highest_isr_cache = -1;
if (apic->apicv_active) {
static_call_cond(kvm_x86_apicv_post_state_restore)(vcpu);
static_call_cond(kvm_x86_hwapic_irr_update)(vcpu, apic_find_highest_irr(apic));
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 719/885] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (717 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 718/885] KVM: x86: Purge "highest ISR" cache when updating APICv state Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 720/885] KVM: x86: Dont inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled Greg Kroah-Hartman
` (168 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alejandro Jimenez, Maxim Levitsky,
Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit 0a19807b464fb10aa79b9dd7f494bc317438fada upstream.
When emulating a x2APIC write in response to an APICv/AVIC trap, get the
the written value from the vAPIC page without checking that reads are
allowed for the target register. AVIC can generate trap-like VM-Exits on
writes to EOI, and so KVM needs to get the written value from the backing
page without running afoul of EOI's write-only behavior.
Alternatively, EOI could be special cased to always write '0', e.g. so
that the sanity check could be preserved, but x2APIC on AMD is actually
supposed to disallow non-zero writes (not emulated by KVM), and the
sanity check was a byproduct of how the KVM code was written, i.e. wasn't
added to guard against anything in particular.
Fixes: 70c8327c11c6 ("KVM: x86: Bug the VM if an accelerated x2APIC trap occurs on a "bad" reg")
Fixes: 1bd9dfec9fd4 ("KVM: x86: Do not block APIC write for non ICR registers")
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/lapic.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 4efdb4a4d72c..5c0f93fc073a 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2284,23 +2284,18 @@ void kvm_apic_write_nodecode(struct kvm_vcpu *vcpu, u32 offset)
struct kvm_lapic *apic = vcpu->arch.apic;
u64 val;
- if (apic_x2apic_mode(apic)) {
- if (KVM_BUG_ON(kvm_lapic_msr_read(apic, offset, &val), vcpu->kvm))
- return;
- } else {
- val = kvm_lapic_get_reg(apic, offset);
- }
-
/*
* ICR is a single 64-bit register when x2APIC is enabled. For legacy
* xAPIC, ICR writes need to go down the common (slightly slower) path
* to get the upper half from ICR2.
*/
if (apic_x2apic_mode(apic) && offset == APIC_ICR) {
+ val = kvm_lapic_get_reg64(apic, APIC_ICR);
kvm_apic_send_ipi(apic, (u32)val, (u32)(val >> 32));
trace_kvm_apic_write(APIC_ICR, val);
} else {
/* TODO: optimize to just emulate side effect w/o one more write */
+ val = kvm_lapic_get_reg(apic, offset);
kvm_lapic_reg_write(apic, offset, (u32)val);
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 720/885] KVM: x86: Dont inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (718 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 719/885] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 721/885] KVM: x86: Dont inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Greg Kroah-Hartman
` (167 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Maxim Levitsky, Sean Christopherson,
Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit a58a66afc464d6d2ec294cd3102f36f3652e7ce4 upstream.
Don't inhibit APICv/AVIC due to an xAPIC ID mismatch if the APIC is
hardware disabled. The ID cannot be consumed while the APIC is disabled,
and the ID is guaranteed to be set back to the vcpu_id when the APIC is
hardware enabled (architectural behavior correctly emulated by KVM).
Fixes: 3743c2f02517 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base")
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/lapic.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2072,6 +2072,9 @@ static void kvm_lapic_xapic_id_updated(s
{
struct kvm *kvm = apic->vcpu->kvm;
+ if (!kvm_apic_hw_enabled(apic))
+ return;
+
if (KVM_BUG_ON(apic_x2apic_mode(apic), kvm))
return;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 721/885] KVM: x86: Dont inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (719 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 720/885] KVM: x86: Dont inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 722/885] KVM: SVM: Flush the "current" TLB when activating AVIC Greg Kroah-Hartman
` (166 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Suravee Suthikulpanit,
Maxim Levitsky, Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit f651a008954803d7bb2d85b7042d0fd46133d782 upstream.
Truncate the vcpu_id, a.k.a. x2APIC ID, to an 8-bit value when comparing
it against the xAPIC ID to avoid false positives (sort of) on systems
with >255 CPUs, i.e. with IDs that don't fit into a u8. The intent of
APIC_ID_MODIFIED is to inhibit APICv/AVIC when the xAPIC is changed from
it's original value,
The mismatch isn't technically a false positive, as architecturally the
xAPIC IDs do end up being aliased in this scenario, and neither APICv
nor AVIC correctly handles IPI virtualization when there is aliasing.
However, KVM already deliberately does not honor the aliasing behavior
that results when an x2APIC ID gets truncated to an xAPIC ID. I.e. the
resulting APICv/AVIC behavior is aligned with KVM's existing behavior
when KVM's x2APIC hotplug hack is effectively enabled.
If/when KVM provides a way to disable the hotplug hack, APICv/AVIC can
piggyback whatever logic disables the optimized APIC map (which is what
provides the hotplug hack), i.e. so that KVM's optimized map and APIC
virtualization yield the same behavior.
For now, fix the immediate problem of APIC virtualization being disabled
for large VMs, which is a much more pressing issue than ensuring KVM
honors architectural behavior for APIC ID aliasing.
Fixes: 3743c2f02517 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base")
Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/lapic.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 191b5a962700..2183a9b8efa5 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2078,7 +2078,12 @@ static void kvm_lapic_xapic_id_updated(struct kvm_lapic *apic)
if (KVM_BUG_ON(apic_x2apic_mode(apic), kvm))
return;
- if (kvm_xapic_id(apic) == apic->vcpu->vcpu_id)
+ /*
+ * Deliberately truncate the vCPU ID when detecting a modified APIC ID
+ * to avoid false positives if the vCPU ID, i.e. x2APIC ID, is a 32-bit
+ * value.
+ */
+ if (kvm_xapic_id(apic) == (u8)apic->vcpu->vcpu_id)
return;
kvm_set_apicv_inhibit(apic->vcpu->kvm, APICV_INHIBIT_REASON_APIC_ID_MODIFIED);
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 722/885] KVM: SVM: Flush the "current" TLB when activating AVIC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (720 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 721/885] KVM: x86: Dont inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 723/885] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Greg Kroah-Hartman
` (165 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paolo Bonzini, Sean Christopherson,
Maxim Levitsky
From: Sean Christopherson <seanjc@google.com>
commit 0ccf3e7cb95a2db8ddb2a44812037ffba8166dc9 upstream.
Flush the TLB when activating AVIC as the CPU can insert into the TLB
while AVIC is "locally" disabled. KVM doesn't treat "APIC hardware
disabled" as VM-wide AVIC inhibition, and so when a vCPU has its APIC
hardware disabled, AVIC is not guaranteed to be inhibited. As a result,
KVM may create a valid NPT mapping for the APIC base, which the CPU can
cache as a non-AVIC translation.
Note, Intel handles this in vmx_set_virtual_apic_mode().
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230106011306.85230-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/svm/avic.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -86,6 +86,12 @@ static void avic_activate_vmcb(struct vc
/* Disabling MSR intercept for x2APIC registers */
svm_set_x2apic_msr_interception(svm, false);
} else {
+ /*
+ * Flush the TLB, the guest may have inserted a non-APIC
+ * mapping into the TLB while AVIC was disabled.
+ */
+ kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, &svm->vcpu);
+
/* For xAVIC and hybrid-xAVIC modes */
vmcb->control.avic_physical_id |= AVIC_MAX_PHYSICAL_ID;
/* Enabling MSR intercept for x2APIC registers */
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 723/885] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (721 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 722/885] KVM: SVM: Flush the "current" TLB when activating AVIC Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 724/885] KVM: SVM: Dont put/load AVIC when setting virtual APIC mode Greg Kroah-Hartman
` (164 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paolo Bonzini, Maxim Levitsky,
Sean Christopherson
From: Sean Christopherson <seanjc@google.com>
commit 5aede752a839904059c2b5d68be0dc4501c6c15f upstream.
Emulate ICR writes on AVIC IPI failures due to invalid targets using the
same logic as failures due to invalid types. AVIC acceleration fails if
_any_ of the targets are invalid, and crucially VM-Exits before sending
IPIs to targets that _are_ valid. In logical mode, the destination is a
bitmap, i.e. a single IPI can target multiple logical IDs. Doing nothing
causes KVM to drop IPIs if at least one target is valid and at least one
target is invalid.
Fixes: 18f40c53e10f ("svm: Add VMEXIT handlers for AVIC")
Cc: stable@vger.kernel.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/svm/avic.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -502,14 +502,18 @@ int avic_incomplete_ipi_interception(str
trace_kvm_avic_incomplete_ipi(vcpu->vcpu_id, icrh, icrl, id, index);
switch (id) {
+ case AVIC_IPI_FAILURE_INVALID_TARGET:
case AVIC_IPI_FAILURE_INVALID_INT_TYPE:
/*
* Emulate IPIs that are not handled by AVIC hardware, which
- * only virtualizes Fixed, Edge-Triggered INTRs. The exit is
- * a trap, e.g. ICR holds the correct value and RIP has been
- * advanced, KVM is responsible only for emulating the IPI.
- * Sadly, hardware may sometimes leave the BUSY flag set, in
- * which case KVM needs to emulate the ICR write as well in
+ * only virtualizes Fixed, Edge-Triggered INTRs, and falls over
+ * if _any_ targets are invalid, e.g. if the logical mode mask
+ * is a superset of running vCPUs.
+ *
+ * The exit is a trap, e.g. ICR holds the correct value and RIP
+ * has been advanced, KVM is responsible only for emulating the
+ * IPI. Sadly, hardware may sometimes leave the BUSY flag set,
+ * in which case KVM needs to emulate the ICR write as well in
* order to clear the BUSY flag.
*/
if (icrl & APIC_ICR_BUSY)
@@ -525,8 +529,6 @@ int avic_incomplete_ipi_interception(str
*/
avic_kick_target_vcpus(vcpu->kvm, apic, icrl, icrh, index);
break;
- case AVIC_IPI_FAILURE_INVALID_TARGET:
- break;
case AVIC_IPI_FAILURE_INVALID_BACKING_PAGE:
WARN_ONCE(1, "Invalid backing page\n");
break;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 724/885] KVM: SVM: Dont put/load AVIC when setting virtual APIC mode
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (722 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 723/885] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 725/885] KVM: x86: Inject #GP if WRMSR sets reserved bits in APIC Self-IPI Greg Kroah-Hartman
` (163 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Suravee Suthikulpanit,
Maxim Levitsky, Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit e0bead97e7590da888148feb9e9133bc278c534b upstream.
Move the VMCB updates from avic_refresh_apicv_exec_ctrl() into
avic_set_virtual_apic_mode() and invert the dependency being said
functions to avoid calling avic_vcpu_{load,put}() and
avic_set_pi_irte_mode() when "only" setting the virtual APIC mode.
avic_set_virtual_apic_mode() is invoked from common x86 with preemption
enabled, which makes avic_vcpu_{load,put}() unhappy. Luckily, calling
those and updating IRTE stuff is unnecessary as the only reason
avic_set_virtual_apic_mode() is called is to handle transitions between
xAPIC and x2APIC that don't also toggle APICv activation. And if
activation doesn't change, there's no need to fiddle with the physical
APIC ID table or update IRTE.
The "full" refresh is guaranteed to be called if activation changes in
this case as the only call to the "set" path is:
kvm_vcpu_update_apicv(vcpu);
static_call_cond(kvm_x86_set_virtual_apic_mode)(vcpu);
and kvm_vcpu_update_apicv() invokes the refresh if activation changes:
if (apic->apicv_active == activate)
goto out;
apic->apicv_active = activate;
kvm_apic_update_apicv(vcpu);
static_call(kvm_x86_refresh_apicv_exec_ctrl)(vcpu);
Rename the helper to reflect that it is also called during "refresh".
WARNING: CPU: 183 PID: 49186 at arch/x86/kvm/svm/avic.c:1081 avic_vcpu_put+0xde/0xf0 [kvm_amd]
CPU: 183 PID: 49186 Comm: stable Tainted: G O 6.0.0-smp--fcddbca45f0a-sink #34
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022
RIP: 0010:avic_vcpu_put+0xde/0xf0 [kvm_amd]
avic_refresh_apicv_exec_ctrl+0x142/0x1c0 [kvm_amd]
avic_set_virtual_apic_mode+0x5a/0x70 [kvm_amd]
kvm_lapic_set_base+0x149/0x1a0 [kvm]
kvm_set_apic_base+0x8f/0xd0 [kvm]
kvm_set_msr_common+0xa3a/0xdc0 [kvm]
svm_set_msr+0x364/0x6b0 [kvm_amd]
__kvm_set_msr+0xb8/0x1c0 [kvm]
kvm_emulate_wrmsr+0x58/0x1d0 [kvm]
msr_interception+0x1c/0x30 [kvm_amd]
svm_invoke_exit_handler+0x31/0x100 [kvm_amd]
svm_handle_exit+0xfc/0x160 [kvm_amd]
vcpu_enter_guest+0x21bb/0x23e0 [kvm]
vcpu_run+0x92/0x450 [kvm]
kvm_arch_vcpu_ioctl_run+0x43e/0x6e0 [kvm]
kvm_vcpu_ioctl+0x559/0x620 [kvm]
Fixes: 05c4fe8c1bd9 ("KVM: SVM: Refresh AVIC configuration when changing APIC mode")
Cc: stable@vger.kernel.org
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/svm/avic.c | 31 +++++++++++++++----------------
arch/x86/kvm/svm/svm.c | 2 +-
arch/x86/kvm/svm/svm.h | 2 +-
3 files changed, 17 insertions(+), 18 deletions(-)
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -747,18 +747,6 @@ void avic_apicv_post_state_restore(struc
avic_handle_ldr_update(vcpu);
}
-void avic_set_virtual_apic_mode(struct kvm_vcpu *vcpu)
-{
- if (!lapic_in_kernel(vcpu) || avic_mode == AVIC_MODE_NONE)
- return;
-
- if (kvm_get_apic_mode(vcpu) == LAPIC_MODE_INVALID) {
- WARN_ONCE(true, "Invalid local APIC state (vcpu_id=%d)", vcpu->vcpu_id);
- return;
- }
- avic_refresh_apicv_exec_ctrl(vcpu);
-}
-
static int avic_set_pi_irte_mode(struct kvm_vcpu *vcpu, bool activate)
{
int ret = 0;
@@ -1100,17 +1088,18 @@ void avic_vcpu_put(struct kvm_vcpu *vcpu
WRITE_ONCE(*(svm->avic_physical_id_cache), entry);
}
-
-void avic_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
+void avic_refresh_virtual_apic_mode(struct kvm_vcpu *vcpu)
{
struct vcpu_svm *svm = to_svm(vcpu);
struct vmcb *vmcb = svm->vmcb01.ptr;
- bool activated = kvm_vcpu_apicv_active(vcpu);
+
+ if (!lapic_in_kernel(vcpu) || avic_mode == AVIC_MODE_NONE)
+ return;
if (!enable_apicv)
return;
- if (activated) {
+ if (kvm_vcpu_apicv_active(vcpu)) {
/**
* During AVIC temporary deactivation, guest could update
* APIC ID, DFR and LDR registers, which would not be trapped
@@ -1124,6 +1113,16 @@ void avic_refresh_apicv_exec_ctrl(struct
avic_deactivate_vmcb(svm);
}
vmcb_mark_dirty(vmcb, VMCB_AVIC);
+}
+
+void avic_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
+{
+ bool activated = kvm_vcpu_apicv_active(vcpu);
+
+ if (!enable_apicv)
+ return;
+
+ avic_refresh_virtual_apic_mode(vcpu);
if (activated)
avic_vcpu_load(vcpu, vcpu->cpu);
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4757,7 +4757,7 @@ static struct kvm_x86_ops svm_x86_ops __
.enable_nmi_window = svm_enable_nmi_window,
.enable_irq_window = svm_enable_irq_window,
.update_cr8_intercept = svm_update_cr8_intercept,
- .set_virtual_apic_mode = avic_set_virtual_apic_mode,
+ .set_virtual_apic_mode = avic_refresh_virtual_apic_mode,
.refresh_apicv_exec_ctrl = avic_refresh_apicv_exec_ctrl,
.check_apicv_inhibit_reasons = avic_check_apicv_inhibit_reasons,
.apicv_post_state_restore = avic_apicv_post_state_restore,
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -645,7 +645,7 @@ void avic_vcpu_blocking(struct kvm_vcpu
void avic_vcpu_unblocking(struct kvm_vcpu *vcpu);
void avic_ring_doorbell(struct kvm_vcpu *vcpu);
unsigned long avic_vcpu_get_apicv_inhibit_reasons(struct kvm_vcpu *vcpu);
-void avic_set_virtual_apic_mode(struct kvm_vcpu *vcpu);
+void avic_refresh_virtual_apic_mode(struct kvm_vcpu *vcpu);
/* sev.c */
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 725/885] KVM: x86: Inject #GP if WRMSR sets reserved bits in APIC Self-IPI
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (723 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 724/885] KVM: SVM: Dont put/load AVIC when setting virtual APIC mode Greg Kroah-Hartman
@ 2023-03-07 17:00 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 726/885] KVM: x86: Inject #GP on x2APIC WRMSR that sets reserved bits 63:32 Greg Kroah-Hartman
` (162 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:00 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marc Orr, Ben Gardon,
Venkatesh Srinivas, Maxim Levitsky, Sean Christopherson
From: Sean Christopherson <seanjc@google.com>
commit ba5838abb05334e4abfdff1490585c7f365e0424 upstream.
Inject a #GP if the guest attempts to set reserved bits in the x2APIC-only
Self-IPI register. Bits 7:0 hold the vector, all other bits are reserved.
Reported-by: Marc Orr <marcorr@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Venkatesh Srinivas <venkateshs@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20230107011025.565472-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/lapic.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2227,10 +2227,14 @@ static int kvm_lapic_reg_write(struct kv
break;
case APIC_SELF_IPI:
- if (apic_x2apic_mode(apic))
- kvm_apic_send_ipi(apic, APIC_DEST_SELF | (val & APIC_VECTOR_MASK), 0);
- else
+ /*
+ * Self-IPI exists only when x2APIC is enabled. Bits 7:0 hold
+ * the vector, everything else is reserved.
+ */
+ if (!apic_x2apic_mode(apic) || (val & ~APIC_VECTOR_MASK))
ret = 1;
+ else
+ kvm_apic_send_ipi(apic, APIC_DEST_SELF | val, 0);
break;
default:
ret = 1;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 726/885] KVM: x86: Inject #GP on x2APIC WRMSR that sets reserved bits 63:32
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (724 preceding siblings ...)
2023-03-07 17:00 ` [PATCH 6.1 725/885] KVM: x86: Inject #GP if WRMSR sets reserved bits in APIC Self-IPI Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 727/885] KVM: SVM: Fix potential overflow in SEVs send|receive_update_data() Greg Kroah-Hartman
` (161 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marc Orr, Maxim Levitsky,
Sean Christopherson
From: Sean Christopherson <seanjc@google.com>
commit ab52be1b310bcb39e6745d34a8f0e8475d67381a upstream.
Reject attempts to set bits 63:32 for 32-bit x2APIC registers, i.e. all
x2APIC registers except ICR. Per Intel's SDM:
Non-zero writes (by WRMSR instruction) to reserved bits to these
registers will raise a general protection fault exception
Opportunistically fix a typo in a nearby comment.
Reported-by: Marc Orr <marcorr@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20230107011025.565472-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/lapic.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2950,13 +2950,17 @@ static int kvm_lapic_msr_read(struct kvm
static int kvm_lapic_msr_write(struct kvm_lapic *apic, u32 reg, u64 data)
{
/*
- * ICR is a 64-bit register in x2APIC mode (and Hyper'v PV vAPIC) and
+ * ICR is a 64-bit register in x2APIC mode (and Hyper-V PV vAPIC) and
* can be written as such, all other registers remain accessible only
* through 32-bit reads/writes.
*/
if (reg == APIC_ICR)
return kvm_x2apic_icr_write(apic, data);
+ /* Bits 63:32 are reserved in all other registers. */
+ if (data >> 32)
+ return 1;
+
return kvm_lapic_reg_write(apic, reg, (u32)data);
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 727/885] KVM: SVM: Fix potential overflow in SEVs send|receive_update_data()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (725 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 726/885] KVM: x86: Inject #GP on x2APIC WRMSR that sets reserved bits 63:32 Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 728/885] KVM: SVM: hyper-v: placate modpost section mismatch error Greg Kroah-Hartman
` (160 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Nguyen, Thomas Lendacky,
Peter Gonda, David Rientjes, Paolo Bonzini, Sean Christopherson,
kvm, linux-kernel
From: Peter Gonda <pgonda@google.com>
commit f94f053aa3a5d6ff17951870483d9eb9e13de2e2 upstream.
KVM_SEV_SEND_UPDATE_DATA and KVM_SEV_RECEIVE_UPDATE_DATA have an integer
overflow issue. Params.guest_len and offset are both 32 bits wide, with a
large params.guest_len the check to confirm a page boundary is not
crossed can falsely pass:
/* Check if we are crossing the page boundary *
offset = params.guest_uaddr & (PAGE_SIZE - 1);
if ((params.guest_len + offset > PAGE_SIZE))
Add an additional check to confirm that params.guest_len itself is not
greater than PAGE_SIZE.
Note, this isn't a security concern as overflow can happen if and only if
params.guest_len is greater than 0xfffff000, and the FW spec says these
commands fail with lengths greater than 16KB, i.e. the PSP will detect
KVM's goof.
Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
Fixes: d3d1af85e2c7 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Reported-by: Andy Nguyen <theflow@google.com>
Suggested-by: Thomas Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230207171354.4012821-1-pgonda@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/svm/sev.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -1293,7 +1293,7 @@ static int sev_send_update_data(struct k
/* Check if we are crossing the page boundary */
offset = params.guest_uaddr & (PAGE_SIZE - 1);
- if ((params.guest_len + offset > PAGE_SIZE))
+ if (params.guest_len > PAGE_SIZE || (params.guest_len + offset) > PAGE_SIZE)
return -EINVAL;
/* Pin guest memory */
@@ -1473,7 +1473,7 @@ static int sev_receive_update_data(struc
/* Check if we are crossing the page boundary */
offset = params.guest_uaddr & (PAGE_SIZE - 1);
- if ((params.guest_len + offset > PAGE_SIZE))
+ if (params.guest_len > PAGE_SIZE || (params.guest_len + offset) > PAGE_SIZE)
return -EINVAL;
hdr = psp_copy_user_blob(params.hdr_uaddr, params.hdr_len);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 728/885] KVM: SVM: hyper-v: placate modpost section mismatch error
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (726 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 727/885] KVM: SVM: Fix potential overflow in SEVs send|receive_update_data() Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 729/885] selftests: x86: Fix incorrect kernel headers search path Greg Kroah-Hartman
` (159 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Randy Dunlap, Vineeth Pillai,
Paolo Bonzini, kvm, Sean Christopherson, Vitaly Kuznetsov
From: Randy Dunlap <rdunlap@infradead.org>
commit 45dd9bc75d9adc9483f0c7d662ba6e73ed698a0b upstream.
modpost reports section mismatch errors/warnings:
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
This "(unknown) (section: .init.data)" all refer to svm_x86_ops.
Tag svm_hv_hardware_setup() with __init to fix a modpost warning as the
non-stub implementation accesses __initdata (svm_x86_ops), i.e. would
generate a use-after-free if svm_hv_hardware_setup() were actually invoked
post-init. The helper is only called from svm_hardware_setup(), which is
also __init, i.e. lack of __init is benign other than the modpost warning.
Fixes: 1e0c7d40758b ("KVM: SVM: hyper-v: Remote TLB flush for SVM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20230222073315.9081-1-rdunlap@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/svm/svm_onhyperv.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/svm/svm_onhyperv.h
+++ b/arch/x86/kvm/svm/svm_onhyperv.h
@@ -28,7 +28,7 @@ static inline void svm_hv_init_vmcb(stru
hve->hv_enlightenments_control.msr_bitmap = 1;
}
-static inline void svm_hv_hardware_setup(void)
+static inline __init void svm_hv_hardware_setup(void)
{
if (npt_enabled &&
ms_hyperv.nested_features & HV_X64_NESTED_ENLIGHTENED_TLB) {
@@ -85,7 +85,7 @@ static inline void svm_hv_init_vmcb(stru
{
}
-static inline void svm_hv_hardware_setup(void)
+static inline __init void svm_hv_hardware_setup(void)
{
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 729/885] selftests: x86: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (727 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 728/885] KVM: SVM: hyper-v: placate modpost section mismatch error Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 730/885] x86/virt: Force GIF=1 prior to disabling SVM (for reboot flows) Greg Kroah-Hartman
` (158 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit ac5ec90e94fe8eddb4499e51398640fa6a89d657 upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/x86/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile
index 0388c4d60af0..ca9374b56ead 100644
--- a/tools/testing/selftests/x86/Makefile
+++ b/tools/testing/selftests/x86/Makefile
@@ -34,7 +34,7 @@ BINARIES_64 := $(TARGETS_C_64BIT_ALL:%=%_64)
BINARIES_32 := $(patsubst %,$(OUTPUT)/%,$(BINARIES_32))
BINARIES_64 := $(patsubst %,$(OUTPUT)/%,$(BINARIES_64))
-CFLAGS := -O2 -g -std=gnu99 -pthread -Wall
+CFLAGS := -O2 -g -std=gnu99 -pthread -Wall $(KHDR_INCLUDES)
# call32_from_64 in thunks.S uses absolute addresses.
ifeq ($(CAN_BUILD_WITH_NOPIE),1)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 730/885] x86/virt: Force GIF=1 prior to disabling SVM (for reboot flows)
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (728 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 729/885] selftests: x86: Fix incorrect kernel headers search path Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 731/885] x86/crash: Disable virt in core NMI crash handler to avoid double shootdown Greg Kroah-Hartman
` (157 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrew Cooper, Tom Lendacky,
Thomas Gleixner, Sean Christopherson
From: Sean Christopherson <seanjc@google.com>
commit 6a3236580b0b1accc3976345e723104f74f6f8e6 upstream.
Set GIF=1 prior to disabling SVM to ensure that INIT is recognized if the
kernel is disabling SVM in an emergency, e.g. if the kernel is about to
jump into a crash kernel or may reboot without doing a full CPU RESET.
If GIF is left cleared, the new kernel (or firmware) will be unabled to
awaken APs. Eat faults on STGI (due to EFER.SVME=0) as it's possible
that SVM could be disabled via NMI shootdown between reading EFER.SVME
and executing STGI.
Link: https://lore.kernel.org/all/cbcb6f35-e5d7-c1c9-4db9-fe5cc4de579a@amd.com
Cc: stable@vger.kernel.org
Cc: Andrew Cooper <Andrew.Cooper3@citrix.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/virtext.h | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
--- a/arch/x86/include/asm/virtext.h
+++ b/arch/x86/include/asm/virtext.h
@@ -126,7 +126,21 @@ static inline void cpu_svm_disable(void)
wrmsrl(MSR_VM_HSAVE_PA, 0);
rdmsrl(MSR_EFER, efer);
- wrmsrl(MSR_EFER, efer & ~EFER_SVME);
+ if (efer & EFER_SVME) {
+ /*
+ * Force GIF=1 prior to disabling SVM to ensure INIT and NMI
+ * aren't blocked, e.g. if a fatal error occurred between CLGI
+ * and STGI. Note, STGI may #UD if SVM is disabled from NMI
+ * context between reading EFER and executing STGI. In that
+ * case, GIF must already be set, otherwise the NMI would have
+ * been blocked, so just eat the fault.
+ */
+ asm_volatile_goto("1: stgi\n\t"
+ _ASM_EXTABLE(1b, %l[fault])
+ ::: "memory" : fault);
+fault:
+ wrmsrl(MSR_EFER, efer & ~EFER_SVME);
+ }
}
/** Makes sure SVM is disabled, if it is supported on the CPU
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 731/885] x86/crash: Disable virt in core NMI crash handler to avoid double shootdown
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (729 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 730/885] x86/virt: Force GIF=1 prior to disabling SVM (for reboot flows) Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 732/885] x86/reboot: Disable virtualization in an emergency if SVM is supported Greg Kroah-Hartman
` (156 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Guilherme G. Piccoli,
Vitaly Kuznetsov, Paolo Bonzini, Thomas Gleixner,
Sean Christopherson
From: Sean Christopherson <seanjc@google.com>
commit 26044aff37a5455b19a91785086914fd33053ef4 upstream.
Disable virtualization in crash_nmi_callback() and rework the
emergency_vmx_disable_all() path to do an NMI shootdown if and only if a
shootdown has not already occurred. NMI crash shootdown fundamentally
can't support multiple invocations as responding CPUs are deliberately
put into halt state without unblocking NMIs. But, the emergency reboot
path doesn't have any work of its own, it simply cares about disabling
virtualization, i.e. so long as a shootdown occurred, emergency reboot
doesn't care who initiated the shootdown, or when.
If "crash_kexec_post_notifiers" is specified on the kernel command line,
panic() will invoke crash_smp_send_stop() and result in a second call to
nmi_shootdown_cpus() during native_machine_emergency_restart().
Invoke the callback _before_ disabling virtualization, as the current
VMCS needs to be cleared before doing VMXOFF. Note, this results in a
subtle change in ordering between disabling virtualization and stopping
Intel PT on the responding CPUs. While VMX and Intel PT do interact,
VMXOFF and writes to MSR_IA32_RTIT_CTL do not induce faults between one
another, which is all that matters when panicking.
Harden nmi_shootdown_cpus() against multiple invocations to try and
capture any such kernel bugs via a WARN instead of hanging the system
during a crash/dump, e.g. prior to the recent hardening of
register_nmi_handler(), re-registering the NMI handler would trigger a
double list_add() and hang the system if CONFIG_BUG_ON_DATA_CORRUPTION=y.
list_add double add: new=ffffffff82220800, prev=ffffffff8221cfe8, next=ffffffff82220800.
WARNING: CPU: 2 PID: 1319 at lib/list_debug.c:29 __list_add_valid+0x67/0x70
Call Trace:
__register_nmi_handler+0xcf/0x130
nmi_shootdown_cpus+0x39/0x90
native_machine_emergency_restart+0x1c9/0x1d0
panic+0x237/0x29b
Extract the disabling logic to a common helper to deduplicate code, and
to prepare for doing the shootdown in the emergency reboot path if SVM
is supported.
Note, prior to commit ed72736183c4 ("x86/reboot: Force all cpus to exit
VMX root if VMX is supported"), nmi_shootdown_cpus() was subtly protected
against a second invocation by a cpu_vmx_enabled() check as the kdump
handler would disable VMX if it ran first.
Fixes: ed72736183c4 ("x86/reboot: Force all cpus to exit VMX root if VMX is supported")
Cc: stable@vger.kernel.org
Reported-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/all/20220427224924.592546-2-gpiccoli@igalia.com
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/reboot.h | 2 +
arch/x86/kernel/crash.c | 17 ----------
arch/x86/kernel/reboot.c | 65 ++++++++++++++++++++++++++++++++++--------
3 files changed, 56 insertions(+), 28 deletions(-)
--- a/arch/x86/include/asm/reboot.h
+++ b/arch/x86/include/asm/reboot.h
@@ -25,6 +25,8 @@ void __noreturn machine_real_restart(uns
#define MRR_BIOS 0
#define MRR_APM 1
+void cpu_emergency_disable_virtualization(void);
+
typedef void (*nmi_shootdown_cb)(int, struct pt_regs*);
void nmi_panic_self_stop(struct pt_regs *regs);
void nmi_shootdown_cpus(nmi_shootdown_cb callback);
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -37,7 +37,6 @@
#include <linux/kdebug.h>
#include <asm/cpu.h>
#include <asm/reboot.h>
-#include <asm/virtext.h>
#include <asm/intel_pt.h>
#include <asm/crash.h>
#include <asm/cmdline.h>
@@ -81,15 +80,6 @@ static void kdump_nmi_callback(int cpu,
*/
cpu_crash_vmclear_loaded_vmcss();
- /* Disable VMX or SVM if needed.
- *
- * We need to disable virtualization on all CPUs.
- * Having VMX or SVM enabled on any CPU may break rebooting
- * after the kdump kernel has finished its task.
- */
- cpu_emergency_vmxoff();
- cpu_emergency_svm_disable();
-
/*
* Disable Intel PT to stop its logging
*/
@@ -148,12 +138,7 @@ void native_machine_crash_shutdown(struc
*/
cpu_crash_vmclear_loaded_vmcss();
- /* Booting kdump kernel with VMX or SVM enabled won't work,
- * because (among other limitations) we can't disable paging
- * with the virt flags.
- */
- cpu_emergency_vmxoff();
- cpu_emergency_svm_disable();
+ cpu_emergency_disable_virtualization();
/*
* Disable Intel PT to stop its logging
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -528,10 +528,7 @@ static inline void kb_wait(void)
}
}
-static void vmxoff_nmi(int cpu, struct pt_regs *regs)
-{
- cpu_emergency_vmxoff();
-}
+static inline void nmi_shootdown_cpus_on_restart(void);
/* Use NMIs as IPIs to tell all CPUs to disable virtualization */
static void emergency_vmx_disable_all(void)
@@ -554,7 +551,7 @@ static void emergency_vmx_disable_all(vo
__cpu_emergency_vmxoff();
/* Halt and exit VMX root operation on the other CPUs. */
- nmi_shootdown_cpus(vmxoff_nmi);
+ nmi_shootdown_cpus_on_restart();
}
}
@@ -795,6 +792,17 @@ void machine_crash_shutdown(struct pt_re
/* This is the CPU performing the emergency shutdown work. */
int crashing_cpu = -1;
+/*
+ * Disable virtualization, i.e. VMX or SVM, to ensure INIT is recognized during
+ * reboot. VMX blocks INIT if the CPU is post-VMXON, and SVM blocks INIT if
+ * GIF=0, i.e. if the crash occurred between CLGI and STGI.
+ */
+void cpu_emergency_disable_virtualization(void)
+{
+ cpu_emergency_vmxoff();
+ cpu_emergency_svm_disable();
+}
+
#if defined(CONFIG_SMP)
static nmi_shootdown_cb shootdown_callback;
@@ -817,7 +825,14 @@ static int crash_nmi_callback(unsigned i
return NMI_HANDLED;
local_irq_disable();
- shootdown_callback(cpu, regs);
+ if (shootdown_callback)
+ shootdown_callback(cpu, regs);
+
+ /*
+ * Prepare the CPU for reboot _after_ invoking the callback so that the
+ * callback can safely use virtualization instructions, e.g. VMCLEAR.
+ */
+ cpu_emergency_disable_virtualization();
atomic_dec(&waiting_for_crash_ipi);
/* Assume hlt works */
@@ -828,18 +843,32 @@ static int crash_nmi_callback(unsigned i
return NMI_HANDLED;
}
-/*
- * Halt all other CPUs, calling the specified function on each of them
+/**
+ * nmi_shootdown_cpus - Stop other CPUs via NMI
+ * @callback: Optional callback to be invoked from the NMI handler
+ *
+ * The NMI handler on the remote CPUs invokes @callback, if not
+ * NULL, first and then disables virtualization to ensure that
+ * INIT is recognized during reboot.
*
- * This function can be used to halt all other CPUs on crash
- * or emergency reboot time. The function passed as parameter
- * will be called inside a NMI handler on all CPUs.
+ * nmi_shootdown_cpus() can only be invoked once. After the first
+ * invocation all other CPUs are stuck in crash_nmi_callback() and
+ * cannot respond to a second NMI.
*/
void nmi_shootdown_cpus(nmi_shootdown_cb callback)
{
unsigned long msecs;
+
local_irq_disable();
+ /*
+ * Avoid certain doom if a shootdown already occurred; re-registering
+ * the NMI handler will cause list corruption, modifying the callback
+ * will do who knows what, etc...
+ */
+ if (WARN_ON_ONCE(crash_ipi_issued))
+ return;
+
/* Make a note of crashing cpu. Will be used in NMI callback. */
crashing_cpu = safe_smp_processor_id();
@@ -867,7 +896,17 @@ void nmi_shootdown_cpus(nmi_shootdown_cb
msecs--;
}
- /* Leave the nmi callback set */
+ /*
+ * Leave the nmi callback set, shootdown is a one-time thing. Clearing
+ * the callback could result in a NULL pointer dereference if a CPU
+ * (finally) responds after the timeout expires.
+ */
+}
+
+static inline void nmi_shootdown_cpus_on_restart(void)
+{
+ if (!crash_ipi_issued)
+ nmi_shootdown_cpus(NULL);
}
/*
@@ -897,6 +936,8 @@ void nmi_shootdown_cpus(nmi_shootdown_cb
/* No other CPUs to shoot down */
}
+static inline void nmi_shootdown_cpus_on_restart(void) { }
+
void run_crash_ipi_callback(struct pt_regs *regs)
{
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 732/885] x86/reboot: Disable virtualization in an emergency if SVM is supported
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (730 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 731/885] x86/crash: Disable virt in core NMI crash handler to avoid double shootdown Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 733/885] x86/reboot: Disable SVM, not just VMX, when stopping CPUs Greg Kroah-Hartman
` (155 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Thomas Gleixner, Sean Christopherson
From: Sean Christopherson <seanjc@google.com>
commit d81f952aa657b76cea381384bef1fea35c5fd266 upstream.
Disable SVM on all CPUs via NMI shootdown during an emergency reboot.
Like VMX, SVM can block INIT, e.g. if the emergency reboot is triggered
between CLGI and STGI, and thus can prevent bringing up other CPUs via
INIT-SIPI-SIPI.
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/reboot.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -530,27 +530,26 @@ static inline void kb_wait(void)
static inline void nmi_shootdown_cpus_on_restart(void);
-/* Use NMIs as IPIs to tell all CPUs to disable virtualization */
-static void emergency_vmx_disable_all(void)
+static void emergency_reboot_disable_virtualization(void)
{
/* Just make sure we won't change CPUs while doing this */
local_irq_disable();
/*
- * Disable VMX on all CPUs before rebooting, otherwise we risk hanging
- * the machine, because the CPU blocks INIT when it's in VMX root.
+ * Disable virtualization on all CPUs before rebooting to avoid hanging
+ * the system, as VMX and SVM block INIT when running in the host.
*
* We can't take any locks and we may be on an inconsistent state, so
- * use NMIs as IPIs to tell the other CPUs to exit VMX root and halt.
+ * use NMIs as IPIs to tell the other CPUs to disable VMX/SVM and halt.
*
- * Do the NMI shootdown even if VMX if off on _this_ CPU, as that
- * doesn't prevent a different CPU from being in VMX root operation.
+ * Do the NMI shootdown even if virtualization is off on _this_ CPU, as
+ * other CPUs may have virtualization enabled.
*/
- if (cpu_has_vmx()) {
- /* Safely force _this_ CPU out of VMX root operation. */
- __cpu_emergency_vmxoff();
+ if (cpu_has_vmx() || cpu_has_svm(NULL)) {
+ /* Safely force _this_ CPU out of VMX/SVM operation. */
+ cpu_emergency_disable_virtualization();
- /* Halt and exit VMX root operation on the other CPUs. */
+ /* Disable VMX/SVM and halt on other CPUs. */
nmi_shootdown_cpus_on_restart();
}
}
@@ -587,7 +586,7 @@ static void native_machine_emergency_res
unsigned short mode;
if (reboot_emergency)
- emergency_vmx_disable_all();
+ emergency_reboot_disable_virtualization();
tboot_shutdown(TB_SHUTDOWN_REBOOT);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 733/885] x86/reboot: Disable SVM, not just VMX, when stopping CPUs
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (731 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 732/885] x86/reboot: Disable virtualization in an emergency if SVM is supported Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 734/885] x86/kprobes: Fix __recover_optprobed_insn check optimizing logic Greg Kroah-Hartman
` (154 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Thomas Gleixner, Sean Christopherson
From: Sean Christopherson <seanjc@google.com>
commit a2b07fa7b93321c059af0c6d492cc9a4f1e390aa upstream.
Disable SVM and more importantly force GIF=1 when halting a CPU or
rebooting the machine. Similar to VMX, SVM allows software to block
INITs via CLGI, and thus can be problematic for a crash/reboot. The
window for failure is smaller with SVM as INIT is only blocked while
GIF=0, i.e. between CLGI and STGI, but the window does exist.
Fixes: fba4f472b33a ("x86/reboot: Turn off KVM when halting a CPU")
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/smp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -32,7 +32,7 @@
#include <asm/mce.h>
#include <asm/trace/irq_vectors.h>
#include <asm/kexec.h>
-#include <asm/virtext.h>
+#include <asm/reboot.h>
/*
* Some notes on x86 processor bugs affecting SMP operation:
@@ -122,7 +122,7 @@ static int smp_stop_nmi_callback(unsigne
if (raw_smp_processor_id() == atomic_read(&stopping_cpu))
return NMI_HANDLED;
- cpu_emergency_vmxoff();
+ cpu_emergency_disable_virtualization();
stop_this_cpu(NULL);
return NMI_HANDLED;
@@ -134,7 +134,7 @@ static int smp_stop_nmi_callback(unsigne
DEFINE_IDTENTRY_SYSVEC(sysvec_reboot)
{
ack_APIC_irq();
- cpu_emergency_vmxoff();
+ cpu_emergency_disable_virtualization();
stop_this_cpu(NULL);
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 734/885] x86/kprobes: Fix __recover_optprobed_insn check optimizing logic
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (732 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 733/885] x86/reboot: Disable SVM, not just VMX, when stopping CPUs Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 735/885] x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range Greg Kroah-Hartman
` (153 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Jihong, Masami Hiramatsu (Google)
From: Yang Jihong <yangjihong1@huawei.com>
commit 868a6fc0ca2407622d2833adefe1c4d284766c4c upstream.
Since the following commit:
commit f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
modified the update timing of the KPROBE_FLAG_OPTIMIZED, a optimized_kprobe
may be in the optimizing or unoptimizing state when op.kp->flags
has KPROBE_FLAG_OPTIMIZED and op->list is not empty.
The __recover_optprobed_insn check logic is incorrect, a kprobe in the
unoptimizing state may be incorrectly determined as unoptimizing.
As a result, incorrect instructions are copied.
The optprobe_queued_unopt function needs to be exported for invoking in
arch directory.
Link: https://lore.kernel.org/all/20230216034247.32348-2-yangjihong1@huawei.com/
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Cc: stable@vger.kernel.org
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/kprobes/opt.c | 4 ++--
include/linux/kprobes.h | 1 +
kernel/kprobes.c | 2 +-
3 files changed, 4 insertions(+), 3 deletions(-)
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -46,8 +46,8 @@ unsigned long __recover_optprobed_insn(k
/* This function only handles jump-optimized kprobe */
if (kp && kprobe_optimized(kp)) {
op = container_of(kp, struct optimized_kprobe, kp);
- /* If op->list is not empty, op is under optimizing */
- if (list_empty(&op->list))
+ /* If op is optimized or under unoptimizing */
+ if (list_empty(&op->list) || optprobe_queued_unopt(op))
goto found;
}
}
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -378,6 +378,7 @@ extern void opt_pre_handler(struct kprob
DEFINE_INSN_CACHE_OPS(optinsn);
extern void wait_for_kprobe_optimizer(void);
+bool optprobe_queued_unopt(struct optimized_kprobe *op);
#else /* !CONFIG_OPTPROBES */
static inline void wait_for_kprobe_optimizer(void) { }
#endif /* CONFIG_OPTPROBES */
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -662,7 +662,7 @@ void wait_for_kprobe_optimizer(void)
mutex_unlock(&kprobe_mutex);
}
-static bool optprobe_queued_unopt(struct optimized_kprobe *op)
+bool optprobe_queued_unopt(struct optimized_kprobe *op)
{
struct optimized_kprobe *_op;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 735/885] x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (733 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 734/885] x86/kprobes: Fix __recover_optprobed_insn check optimizing logic Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 736/885] x86/microcode/amd: Remove load_microcode_amd()s bsp parameter Greg Kroah-Hartman
` (152 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yang Jihong, Masami Hiramatsu (Google)
From: Yang Jihong <yangjihong1@huawei.com>
commit f1c97a1b4ef709e3f066f82e3ba3108c3b133ae6 upstream.
When arch_prepare_optimized_kprobe calculating jump destination address,
it copies original instructions from jmp-optimized kprobe (see
__recover_optprobed_insn), and calculated based on length of original
instruction.
arch_check_optimized_kprobe does not check KPROBE_FLAG_OPTIMATED when
checking whether jmp-optimized kprobe exists.
As a result, setup_detour_execution may jump to a range that has been
overwritten by jump destination address, resulting in an inval opcode error.
For example, assume that register two kprobes whose addresses are
<func+9> and <func+11> in "func" function.
The original code of "func" function is as follows:
0xffffffff816cb5e9 <+9>: push %r12
0xffffffff816cb5eb <+11>: xor %r12d,%r12d
0xffffffff816cb5ee <+14>: test %rdi,%rdi
0xffffffff816cb5f1 <+17>: setne %r12b
0xffffffff816cb5f5 <+21>: push %rbp
1.Register the kprobe for <func+11>, assume that is kp1, corresponding optimized_kprobe is op1.
After the optimization, "func" code changes to:
0xffffffff816cc079 <+9>: push %r12
0xffffffff816cc07b <+11>: jmp 0xffffffffa0210000
0xffffffff816cc080 <+16>: incl 0xf(%rcx)
0xffffffff816cc083 <+19>: xchg %eax,%ebp
0xffffffff816cc084 <+20>: (bad)
0xffffffff816cc085 <+21>: push %rbp
Now op1->flags == KPROBE_FLAG_OPTIMATED;
2. Register the kprobe for <func+9>, assume that is kp2, corresponding optimized_kprobe is op2.
register_kprobe(kp2)
register_aggr_kprobe
alloc_aggr_kprobe
__prepare_optimized_kprobe
arch_prepare_optimized_kprobe
__recover_optprobed_insn // copy original bytes from kp1->optinsn.copied_insn,
// jump address = <func+14>
3. disable kp1:
disable_kprobe(kp1)
__disable_kprobe
...
if (p == orig_p || aggr_kprobe_disabled(orig_p)) {
ret = disarm_kprobe(orig_p, true) // add op1 in unoptimizing_list, not unoptimized
orig_p->flags |= KPROBE_FLAG_DISABLED; // op1->flags == KPROBE_FLAG_OPTIMATED | KPROBE_FLAG_DISABLED
...
4. unregister kp2
__unregister_kprobe_top
...
if (!kprobe_disabled(ap) && !kprobes_all_disarmed) {
optimize_kprobe(op)
...
if (arch_check_optimized_kprobe(op) < 0) // because op1 has KPROBE_FLAG_DISABLED, here not return
return;
p->kp.flags |= KPROBE_FLAG_OPTIMIZED; // now op2 has KPROBE_FLAG_OPTIMIZED
}
"func" code now is:
0xffffffff816cc079 <+9>: int3
0xffffffff816cc07a <+10>: push %rsp
0xffffffff816cc07b <+11>: jmp 0xffffffffa0210000
0xffffffff816cc080 <+16>: incl 0xf(%rcx)
0xffffffff816cc083 <+19>: xchg %eax,%ebp
0xffffffff816cc084 <+20>: (bad)
0xffffffff816cc085 <+21>: push %rbp
5. if call "func", int3 handler call setup_detour_execution:
if (p->flags & KPROBE_FLAG_OPTIMIZED) {
...
regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
...
}
The code for the destination address is
0xffffffffa021072c: push %r12
0xffffffffa021072e: xor %r12d,%r12d
0xffffffffa0210731: jmp 0xffffffff816cb5ee <func+14>
However, <func+14> is not a valid start instruction address. As a result, an error occurs.
Link: https://lore.kernel.org/all/20230216034247.32348-3-yangjihong1@huawei.com/
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/kprobes/opt.c | 2 +-
include/linux/kprobes.h | 1 +
kernel/kprobes.c | 2 +-
3 files changed, 3 insertions(+), 2 deletions(-)
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -353,7 +353,7 @@ int arch_check_optimized_kprobe(struct o
for (i = 1; i < op->optinsn.size; i++) {
p = get_kprobe(op->kp.addr + i);
- if (p && !kprobe_disabled(p))
+ if (p && !kprobe_disarmed(p))
return -EEXIST;
}
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -379,6 +379,7 @@ DEFINE_INSN_CACHE_OPS(optinsn);
extern void wait_for_kprobe_optimizer(void);
bool optprobe_queued_unopt(struct optimized_kprobe *op);
+bool kprobe_disarmed(struct kprobe *p);
#else /* !CONFIG_OPTPROBES */
static inline void wait_for_kprobe_optimizer(void) { }
#endif /* CONFIG_OPTPROBES */
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -458,7 +458,7 @@ static inline int kprobe_optready(struct
}
/* Return true if the kprobe is disarmed. Note: p must be on hash list */
-static inline bool kprobe_disarmed(struct kprobe *p)
+bool kprobe_disarmed(struct kprobe *p)
{
struct optimized_kprobe *op;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 736/885] x86/microcode/amd: Remove load_microcode_amd()s bsp parameter
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (734 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 735/885] x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 737/885] x86/microcode/AMD: Add a @cpu parameter to the reloading functions Greg Kroah-Hartman
` (151 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Borislav Petkov (AMD)
From: Borislav Petkov (AMD) <bp@alien8.de>
commit 2355370cd941cbb20882cc3f34460f9f2b8f9a18 upstream.
It is always the BSP.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230130161709.11615-2-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/cpu/microcode/amd.c | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -553,8 +553,7 @@ void load_ucode_amd_ap(unsigned int cpui
apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false);
}
-static enum ucode_state
-load_microcode_amd(bool save, u8 family, const u8 *data, size_t size);
+static enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size);
int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
{
@@ -572,7 +571,7 @@ int __init save_microcode_in_initrd_amd(
if (!desc.mc)
return -EINVAL;
- ret = load_microcode_amd(true, x86_family(cpuid_1_eax), desc.data, desc.size);
+ ret = load_microcode_amd(x86_family(cpuid_1_eax), desc.data, desc.size);
if (ret > UCODE_UPDATED)
return -EINVAL;
@@ -850,8 +849,7 @@ static enum ucode_state __load_microcode
return UCODE_OK;
}
-static enum ucode_state
-load_microcode_amd(bool save, u8 family, const u8 *data, size_t size)
+static enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size)
{
struct ucode_patch *p;
enum ucode_state ret;
@@ -875,10 +873,6 @@ load_microcode_amd(bool save, u8 family,
ret = UCODE_NEW;
}
- /* save BSP's matching patch for early load */
- if (!save)
- return ret;
-
memset(amd_ucode_patch, 0, PATCH_MAX_SIZE);
memcpy(amd_ucode_patch, p->data, min_t(u32, p->size, PATCH_MAX_SIZE));
@@ -906,12 +900,11 @@ static enum ucode_state request_microcod
{
char fw_name[36] = "amd-ucode/microcode_amd.bin";
struct cpuinfo_x86 *c = &cpu_data(cpu);
- bool bsp = c->cpu_index == boot_cpu_data.cpu_index;
enum ucode_state ret = UCODE_NFOUND;
const struct firmware *fw;
/* reload ucode container only on the boot cpu */
- if (!refresh_fw || !bsp)
+ if (!refresh_fw)
return UCODE_OK;
if (c->x86 >= 0x15)
@@ -926,7 +919,7 @@ static enum ucode_state request_microcod
if (!verify_container(fw->data, fw->size, false))
goto fw_release;
- ret = load_microcode_amd(bsp, c->x86, fw->data, fw->size);
+ ret = load_microcode_amd(c->x86, fw->data, fw->size);
fw_release:
release_firmware(fw);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 737/885] x86/microcode/AMD: Add a @cpu parameter to the reloading functions
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (735 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 736/885] x86/microcode/amd: Remove load_microcode_amd()s bsp parameter Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 738/885] x86/microcode/AMD: Fix mixed steppings support Greg Kroah-Hartman
` (150 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Borislav Petkov (AMD)
From: Borislav Petkov (AMD) <bp@alien8.de>
commit a5ad92134bd153a9ccdcddf09a95b088f36c3cce upstream.
Will be used in a subsequent change.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230130161709.11615-3-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/microcode.h | 4 ++--
arch/x86/include/asm/microcode_amd.h | 4 ++--
arch/x86/kernel/cpu/microcode/amd.c | 2 +-
arch/x86/kernel/cpu/microcode/core.c | 6 +++---
4 files changed, 8 insertions(+), 8 deletions(-)
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -127,13 +127,13 @@ static inline unsigned int x86_cpuid_fam
#ifdef CONFIG_MICROCODE
extern void __init load_ucode_bsp(void);
extern void load_ucode_ap(void);
-void reload_early_microcode(void);
+void reload_early_microcode(unsigned int cpu);
extern bool initrd_gone;
void microcode_bsp_resume(void);
#else
static inline void __init load_ucode_bsp(void) { }
static inline void load_ucode_ap(void) { }
-static inline void reload_early_microcode(void) { }
+static inline void reload_early_microcode(unsigned int cpu) { }
static inline void microcode_bsp_resume(void) { }
#endif
--- a/arch/x86/include/asm/microcode_amd.h
+++ b/arch/x86/include/asm/microcode_amd.h
@@ -47,12 +47,12 @@ struct microcode_amd {
extern void __init load_ucode_amd_bsp(unsigned int family);
extern void load_ucode_amd_ap(unsigned int family);
extern int __init save_microcode_in_initrd_amd(unsigned int family);
-void reload_ucode_amd(void);
+void reload_ucode_amd(unsigned int cpu);
#else
static inline void __init load_ucode_amd_bsp(unsigned int family) {}
static inline void load_ucode_amd_ap(unsigned int family) {}
static inline int __init
save_microcode_in_initrd_amd(unsigned int family) { return -EINVAL; }
-static inline void reload_ucode_amd(void) {}
+static inline void reload_ucode_amd(unsigned int cpu) {}
#endif
#endif /* _ASM_X86_MICROCODE_AMD_H */
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -578,7 +578,7 @@ int __init save_microcode_in_initrd_amd(
return 0;
}
-void reload_ucode_amd(void)
+void reload_ucode_amd(unsigned int cpu)
{
struct microcode_amd *mc;
u32 rev, dummy __always_unused;
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -298,7 +298,7 @@ struct cpio_data find_microcode_in_initr
#endif
}
-void reload_early_microcode(void)
+void reload_early_microcode(unsigned int cpu)
{
int vendor, family;
@@ -312,7 +312,7 @@ void reload_early_microcode(void)
break;
case X86_VENDOR_AMD:
if (family >= 0x10)
- reload_ucode_amd();
+ reload_ucode_amd(cpu);
break;
default:
break;
@@ -695,7 +695,7 @@ void microcode_bsp_resume(void)
if (uci->valid && uci->mc)
microcode_ops->apply_microcode(cpu);
else if (!uci->mc)
- reload_early_microcode();
+ reload_early_microcode(cpu);
}
static struct syscore_ops mc_syscore_ops = {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 738/885] x86/microcode/AMD: Fix mixed steppings support
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (736 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 737/885] x86/microcode/AMD: Add a @cpu parameter to the reloading functions Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 739/885] x86/speculation: Allow enabling STIBP with legacy IBRS Greg Kroah-Hartman
` (149 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Borislav Petkov (AMD), stable
From: Borislav Petkov (AMD) <bp@alien8.de>
commit 7ff6edf4fef38ab404ee7861f257e28eaaeed35f upstream.
The AMD side of the loader has always claimed to support mixed
steppings. But somewhere along the way, it broke that by assuming that
the cached patch blob is a single one instead of it being one per
*node*.
So turn it into a per-node one so that each node can stash the blob
relevant for it.
[ NB: Fixes tag is not really the exactly correct one but it is good
enough. ]
Fixes: fe055896c040 ("x86/microcode: Merge the early microcode loader")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org> # 2355370cd941 ("x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter")
Cc: <stable@kernel.org> # a5ad92134bd1 ("x86/microcode/AMD: Add a @cpu parameter to the reloading functions")
Link: https://lore.kernel.org/r/20230130161709.11615-4-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/cpu/microcode/amd.c | 34 +++++++++++++++++++++-------------
1 file changed, 21 insertions(+), 13 deletions(-)
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -55,7 +55,9 @@ struct cont_desc {
};
static u32 ucode_new_rev;
-static u8 amd_ucode_patch[PATCH_MAX_SIZE];
+
+/* One blob per node. */
+static u8 amd_ucode_patch[MAX_NUMNODES][PATCH_MAX_SIZE];
/*
* Microcode patch container file is prepended to the initrd in cpio
@@ -428,7 +430,7 @@ apply_microcode_early_amd(u32 cpuid_1_ea
patch = (u8 (*)[PATCH_MAX_SIZE])__pa_nodebug(&amd_ucode_patch);
#else
new_rev = &ucode_new_rev;
- patch = &amd_ucode_patch;
+ patch = &amd_ucode_patch[0];
#endif
desc.cpuid_1_eax = cpuid_1_eax;
@@ -580,10 +582,10 @@ int __init save_microcode_in_initrd_amd(
void reload_ucode_amd(unsigned int cpu)
{
- struct microcode_amd *mc;
u32 rev, dummy __always_unused;
+ struct microcode_amd *mc;
- mc = (struct microcode_amd *)amd_ucode_patch;
+ mc = (struct microcode_amd *)amd_ucode_patch[cpu_to_node(cpu)];
rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
@@ -851,6 +853,8 @@ static enum ucode_state __load_microcode
static enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size)
{
+ struct cpuinfo_x86 *c;
+ unsigned int nid, cpu;
struct ucode_patch *p;
enum ucode_state ret;
@@ -863,18 +867,22 @@ static enum ucode_state load_microcode_a
return ret;
}
- p = find_patch(0);
- if (!p) {
- return ret;
- } else {
- if (boot_cpu_data.microcode >= p->patch_id)
- return ret;
+ for_each_node(nid) {
+ cpu = cpumask_first(cpumask_of_node(nid));
+ c = &cpu_data(cpu);
+
+ p = find_patch(cpu);
+ if (!p)
+ continue;
+
+ if (c->microcode >= p->patch_id)
+ continue;
ret = UCODE_NEW;
- }
- memset(amd_ucode_patch, 0, PATCH_MAX_SIZE);
- memcpy(amd_ucode_patch, p->data, min_t(u32, p->size, PATCH_MAX_SIZE));
+ memset(&amd_ucode_patch[nid], 0, PATCH_MAX_SIZE);
+ memcpy(&amd_ucode_patch[nid], p->data, min_t(u32, p->size, PATCH_MAX_SIZE));
+ }
return ret;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 739/885] x86/speculation: Allow enabling STIBP with legacy IBRS
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (737 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 738/885] x86/microcode/AMD: Fix mixed steppings support Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 740/885] Documentation/hw-vuln: Document the interaction between IBRS and STIBP Greg Kroah-Hartman
` (148 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, José Oliveira, Rodrigo Branco,
KP Singh, Borislav Petkov (AMD)
From: KP Singh <kpsingh@kernel.org>
commit 6921ed9049bc7457f66c1596c5b78aec0dae4a9d upstream.
When plain IBRS is enabled (not enhanced IBRS), the logic in
spectre_v2_user_select_mitigation() determines that STIBP is not needed.
The IBRS bit implicitly protects against cross-thread branch target
injection. However, with legacy IBRS, the IBRS bit is cleared on
returning to userspace for performance reasons which leaves userspace
threads vulnerable to cross-thread branch target injection against which
STIBP protects.
Exclude IBRS from the spectre_v2_in_ibrs_mode() check to allow for
enabling STIBP (through seccomp/prctl() by default or always-on, if
selected by spectre_v2_user kernel cmdline parameter).
[ bp: Massage. ]
Fixes: 7c693f54c873 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS")
Reported-by: José Oliveira <joseloliveira11@gmail.com>
Reported-by: Rodrigo Branco <rodrigo@kernelhacking.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230220120127.1975241-1-kpsingh@kernel.org
Link: https://lore.kernel.org/r/20230221184908.2349578-1-kpsingh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/cpu/bugs.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -1103,14 +1103,18 @@ spectre_v2_parse_user_cmdline(void)
return SPECTRE_V2_USER_CMD_AUTO;
}
-static inline bool spectre_v2_in_ibrs_mode(enum spectre_v2_mitigation mode)
+static inline bool spectre_v2_in_eibrs_mode(enum spectre_v2_mitigation mode)
{
- return mode == SPECTRE_V2_IBRS ||
- mode == SPECTRE_V2_EIBRS ||
+ return mode == SPECTRE_V2_EIBRS ||
mode == SPECTRE_V2_EIBRS_RETPOLINE ||
mode == SPECTRE_V2_EIBRS_LFENCE;
}
+static inline bool spectre_v2_in_ibrs_mode(enum spectre_v2_mitigation mode)
+{
+ return spectre_v2_in_eibrs_mode(mode) || mode == SPECTRE_V2_IBRS;
+}
+
static void __init
spectre_v2_user_select_mitigation(void)
{
@@ -1173,12 +1177,19 @@ spectre_v2_user_select_mitigation(void)
}
/*
- * If no STIBP, IBRS or enhanced IBRS is enabled, or SMT impossible,
- * STIBP is not required.
+ * If no STIBP, enhanced IBRS is enabled, or SMT impossible, STIBP
+ * is not required.
+ *
+ * Enhanced IBRS also protects against cross-thread branch target
+ * injection in user-mode as the IBRS bit remains always set which
+ * implicitly enables cross-thread protections. However, in legacy IBRS
+ * mode, the IBRS bit is set only on kernel entry and cleared on return
+ * to userspace. This disables the implicit cross-thread protection,
+ * so allow for STIBP to be selected in that case.
*/
if (!boot_cpu_has(X86_FEATURE_STIBP) ||
!smt_possible ||
- spectre_v2_in_ibrs_mode(spectre_v2_enabled))
+ spectre_v2_in_eibrs_mode(spectre_v2_enabled))
return;
/*
@@ -2305,7 +2316,7 @@ static ssize_t mmio_stale_data_show_stat
static char *stibp_state(void)
{
- if (spectre_v2_in_ibrs_mode(spectre_v2_enabled))
+ if (spectre_v2_in_eibrs_mode(spectre_v2_enabled))
return "";
switch (spectre_v2_user_stibp) {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 740/885] Documentation/hw-vuln: Document the interaction between IBRS and STIBP
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (738 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 739/885] x86/speculation: Allow enabling STIBP with legacy IBRS Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 741/885] virt/sev-guest: Return -EIO if certificate buffer is not large enough Greg Kroah-Hartman
` (147 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, KP Singh, Borislav Petkov (AMD)
From: KP Singh <kpsingh@kernel.org>
commit e02b50ca442e88122e1302d4dbc1b71a4808c13f upstream.
Explain why STIBP is needed with legacy IBRS as currently implemented
(KERNEL_IBRS) and why STIBP is not needed when enhanced IBRS is enabled.
Fixes: 7c693f54c873 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS")
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230227060541.1939092-2-kpsingh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/admin-guide/hw-vuln/spectre.rst | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
--- a/Documentation/admin-guide/hw-vuln/spectre.rst
+++ b/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -479,8 +479,16 @@ Spectre variant 2
On Intel Skylake-era systems the mitigation covers most, but not all,
cases. See :ref:`[3] <spec_ref3>` for more details.
- On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
- IBRS on x86), retpoline is automatically disabled at run time.
+ On CPUs with hardware mitigation for Spectre variant 2 (e.g. IBRS
+ or enhanced IBRS on x86), retpoline is automatically disabled at run time.
+
+ Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
+ boot, by setting the IBRS bit, and they're automatically protected against
+ Spectre v2 variant attacks, including cross-thread branch target injections
+ on SMT systems (STIBP). In other words, eIBRS enables STIBP too.
+
+ Legacy IBRS systems clear the IBRS bit on exit to userspace and
+ therefore explicitly enable STIBP for that
The retpoline mitigation is turned on by default on vulnerable
CPUs. It can be forced on or off by the administrator
@@ -504,9 +512,12 @@ Spectre variant 2
For Spectre variant 2 mitigation, individual user programs
can be compiled with return trampolines for indirect branches.
This protects them from consuming poisoned entries in the branch
- target buffer left by malicious software. Alternatively, the
- programs can disable their indirect branch speculation via prctl()
- (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+ target buffer left by malicious software.
+
+ On legacy IBRS systems, at return to userspace, implicit STIBP is disabled
+ because the kernel clears the IBRS bit. In this case, the userspace programs
+ can disable indirect branch speculation via prctl() (See
+ :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
On x86, this will turn on STIBP to guard against attacks from the
sibling thread when the user program is running, and use IBPB to
flush the branch target buffer when switching to/from the program.
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 741/885] virt/sev-guest: Return -EIO if certificate buffer is not large enough
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (739 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 740/885] Documentation/hw-vuln: Document the interaction between IBRS and STIBP Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 742/885] brd: mark as nowait compatible Greg Kroah-Hartman
` (146 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Larry Dewey, Tom Lendacky,
Borislav Petkov (AMD),
stable
From: Tom Lendacky <thomas.lendacky@amd.com>
commit dd093fb08e8f8a958fec4eef36f9f09eac047f60 upstream.
Commit
47894e0fa6a5 ("virt/sev-guest: Prevent IV reuse in the SNP guest driver")
changed the behavior associated with the return value when the caller
does not supply a large enough certificate buffer. Prior to the commit a
value of -EIO was returned. Now, 0 is returned. This breaks the
established ABI with the user.
Change the code to detect the buffer size error and return -EIO.
Fixes: 47894e0fa6a5 ("virt/sev-guest: Prevent IV reuse in the SNP guest driver")
Reported-by: Larry Dewey <larry.dewey@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Larry Dewey <larry.dewey@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/2afbcae6daf13f7ad5a4296692e0a0fe1bc1e4ee.1677083979.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/virt/coco/sev-guest/sev-guest.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
--- a/drivers/virt/coco/sev-guest/sev-guest.c
+++ b/drivers/virt/coco/sev-guest/sev-guest.c
@@ -379,9 +379,26 @@ static int handle_guest_request(struct s
snp_dev->input.data_npages = certs_npages;
}
+ /*
+ * Increment the message sequence number. There is no harm in doing
+ * this now because decryption uses the value stored in the response
+ * structure and any failure will wipe the VMPCK, preventing further
+ * use anyway.
+ */
+ snp_inc_msg_seqno(snp_dev);
+
if (fw_err)
*fw_err = err;
+ /*
+ * If an extended guest request was issued and the supplied certificate
+ * buffer was not large enough, a standard guest request was issued to
+ * prevent IV reuse. If the standard request was successful, return -EIO
+ * back to the caller as would have originally been returned.
+ */
+ if (!rc && err == SNP_GUEST_REQ_INVALID_LEN)
+ return -EIO;
+
if (rc) {
dev_alert(snp_dev->dev,
"Detected error from ASP request. rc: %d, fw_err: %llu\n",
@@ -397,9 +414,6 @@ static int handle_guest_request(struct s
goto disable_vmpck;
}
- /* Increment to new message sequence after payload decryption was successful. */
- snp_inc_msg_seqno(snp_dev);
-
return 0;
disable_vmpck:
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 742/885] brd: mark as nowait compatible
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (740 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 741/885] virt/sev-guest: Return -EIO if certificate buffer is not large enough Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 743/885] brd: return 0/-error from brd_insert_page() Greg Kroah-Hartman
` (145 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jens Axboe
From: Jens Axboe <axboe@kernel.dk>
commit 67205f80be9910207481406c47f7d85e703fb2e9 upstream.
By default, non-mq drivers do not support nowait. This causes io_uring
to use a slower path as the driver cannot be trust not to block. brd
can safely set the nowait flag, as worst case all it does is a NOIO
allocation.
For io_uring, this makes a substantial difference. Before:
submitter=0, tid=453, file=/dev/ram0, node=-1
polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=440.03K, BW=1718MiB/s, IOS/call=32/31
IOPS=428.96K, BW=1675MiB/s, IOS/call=32/32
IOPS=442.59K, BW=1728MiB/s, IOS/call=32/31
IOPS=419.65K, BW=1639MiB/s, IOS/call=32/32
IOPS=426.82K, BW=1667MiB/s, IOS/call=32/31
and after:
submitter=0, tid=354, file=/dev/ram0, node=-1
polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=3.37M, BW=13.15GiB/s, IOS/call=32/31
IOPS=3.45M, BW=13.46GiB/s, IOS/call=32/31
IOPS=3.43M, BW=13.42GiB/s, IOS/call=32/32
IOPS=3.43M, BW=13.39GiB/s, IOS/call=32/31
IOPS=3.43M, BW=13.38GiB/s, IOS/call=32/31
or about an 8x in difference. Now that brd is prepared to deal with
REQ_NOWAIT reads/writes, mark it as supporting that.
Cc: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/linux-block/20230203103005.31290-1-p.raghav@samsung.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/brd.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -412,6 +412,7 @@ static int brd_alloc(int i)
/* Tell the block layer that this is not a rotational device */
blk_queue_flag_set(QUEUE_FLAG_NONROT, disk->queue);
blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, disk->queue);
+ blk_queue_flag_set(QUEUE_FLAG_NOWAIT, disk->queue);
err = add_disk(disk);
if (err)
goto out_cleanup_disk;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 743/885] brd: return 0/-error from brd_insert_page()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (741 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 742/885] brd: mark as nowait compatible Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 744/885] brd: check for REQ_NOWAIT and set correct page allocation mask Greg Kroah-Hartman
` (144 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Christoph Hellwig, Jens Axboe
From: Jens Axboe <axboe@kernel.dk>
commit db0ccc44a20b4bb3039c0f6885a1f9c3323c7673 upstream.
It currently returns a page, but callers just check for NULL/page to
gauge success. Clean this up and return the appropriate error directly
instead.
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/brd.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -78,11 +78,9 @@ static struct page *brd_lookup_page(stru
}
/*
- * Look up and return a brd's page for a given sector.
- * If one does not exist, allocate an empty page, and insert that. Then
- * return it.
+ * Insert a new page for a given sector, if one does not already exist.
*/
-static struct page *brd_insert_page(struct brd_device *brd, sector_t sector)
+static int brd_insert_page(struct brd_device *brd, sector_t sector)
{
pgoff_t idx;
struct page *page;
@@ -90,7 +88,7 @@ static struct page *brd_insert_page(stru
page = brd_lookup_page(brd, sector);
if (page)
- return page;
+ return 0;
/*
* Must use NOIO because we don't want to recurse back into the
@@ -99,11 +97,11 @@ static struct page *brd_insert_page(stru
gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM;
page = alloc_page(gfp_flags);
if (!page)
- return NULL;
+ return -ENOMEM;
if (radix_tree_preload(GFP_NOIO)) {
__free_page(page);
- return NULL;
+ return -ENOMEM;
}
spin_lock(&brd->brd_lock);
@@ -120,8 +118,7 @@ static struct page *brd_insert_page(stru
spin_unlock(&brd->brd_lock);
radix_tree_preload_end();
-
- return page;
+ return 0;
}
/*
@@ -174,16 +171,17 @@ static int copy_to_brd_setup(struct brd_
{
unsigned int offset = (sector & (PAGE_SECTORS-1)) << SECTOR_SHIFT;
size_t copy;
+ int ret;
copy = min_t(size_t, n, PAGE_SIZE - offset);
- if (!brd_insert_page(brd, sector))
- return -ENOSPC;
+ ret = brd_insert_page(brd, sector);
+ if (ret)
+ return ret;
if (copy < n) {
sector += copy >> SECTOR_SHIFT;
- if (!brd_insert_page(brd, sector))
- return -ENOSPC;
+ ret = brd_insert_page(brd, sector);
}
- return 0;
+ return ret;
}
/*
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 744/885] brd: check for REQ_NOWAIT and set correct page allocation mask
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (742 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 743/885] brd: return 0/-error from brd_insert_page() Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 745/885] ima: fix error handling logic when file measurement failed Greg Kroah-Hartman
` (143 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Christoph Hellwig, Jens Axboe
From: Jens Axboe <axboe@kernel.dk>
commit 6ded703c56c21bfb259725d4f1831a5feb563e9b upstream.
If REQ_NOWAIT is set, then do a non-blocking allocation if the operation
is a write and we need to insert a new page. Currently REQ_NOWAIT cannot
be set as the queue isn't marked as supporting nowait, this change is in
preparation for allowing that.
radix_tree_preload() warns on attempting to call it with an allocation
mask that doesn't allow blocking. While that warning could arguably
be removed, we need to handle radix insertion failures anyway as they
are more likely if we cannot block to get memory.
Remove legacy BUG_ON()'s and turn them into proper errors instead, one
for the allocation failure and one for finding a page that doesn't
match the correct index.
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/brd.c | 48 ++++++++++++++++++++++++++++--------------------
1 file changed, 28 insertions(+), 20 deletions(-)
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -80,26 +80,21 @@ static struct page *brd_lookup_page(stru
/*
* Insert a new page for a given sector, if one does not already exist.
*/
-static int brd_insert_page(struct brd_device *brd, sector_t sector)
+static int brd_insert_page(struct brd_device *brd, sector_t sector, gfp_t gfp)
{
pgoff_t idx;
struct page *page;
- gfp_t gfp_flags;
+ int ret = 0;
page = brd_lookup_page(brd, sector);
if (page)
return 0;
- /*
- * Must use NOIO because we don't want to recurse back into the
- * block or filesystem layers from page reclaim.
- */
- gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM;
- page = alloc_page(gfp_flags);
+ page = alloc_page(gfp | __GFP_ZERO | __GFP_HIGHMEM);
if (!page)
return -ENOMEM;
- if (radix_tree_preload(GFP_NOIO)) {
+ if (gfpflags_allow_blocking(gfp) && radix_tree_preload(gfp)) {
__free_page(page);
return -ENOMEM;
}
@@ -110,15 +105,17 @@ static int brd_insert_page(struct brd_de
if (radix_tree_insert(&brd->brd_pages, idx, page)) {
__free_page(page);
page = radix_tree_lookup(&brd->brd_pages, idx);
- BUG_ON(!page);
- BUG_ON(page->index != idx);
+ if (!page)
+ ret = -ENOMEM;
+ else if (page->index != idx)
+ ret = -EIO;
} else {
brd->brd_nr_pages++;
}
spin_unlock(&brd->brd_lock);
radix_tree_preload_end();
- return 0;
+ return ret;
}
/*
@@ -167,19 +164,20 @@ static void brd_free_pages(struct brd_de
/*
* copy_to_brd_setup must be called before copy_to_brd. It may sleep.
*/
-static int copy_to_brd_setup(struct brd_device *brd, sector_t sector, size_t n)
+static int copy_to_brd_setup(struct brd_device *brd, sector_t sector, size_t n,
+ gfp_t gfp)
{
unsigned int offset = (sector & (PAGE_SECTORS-1)) << SECTOR_SHIFT;
size_t copy;
int ret;
copy = min_t(size_t, n, PAGE_SIZE - offset);
- ret = brd_insert_page(brd, sector);
+ ret = brd_insert_page(brd, sector, gfp);
if (ret)
return ret;
if (copy < n) {
sector += copy >> SECTOR_SHIFT;
- ret = brd_insert_page(brd, sector);
+ ret = brd_insert_page(brd, sector, gfp);
}
return ret;
}
@@ -254,20 +252,26 @@ static void copy_from_brd(void *dst, str
* Process a single bvec of a bio.
*/
static int brd_do_bvec(struct brd_device *brd, struct page *page,
- unsigned int len, unsigned int off, enum req_op op,
+ unsigned int len, unsigned int off, blk_opf_t opf,
sector_t sector)
{
void *mem;
int err = 0;
- if (op_is_write(op)) {
- err = copy_to_brd_setup(brd, sector, len);
+ if (op_is_write(opf)) {
+ /*
+ * Must use NOIO because we don't want to recurse back into the
+ * block or filesystem layers from page reclaim.
+ */
+ gfp_t gfp = opf & REQ_NOWAIT ? GFP_NOWAIT : GFP_NOIO;
+
+ err = copy_to_brd_setup(brd, sector, len, gfp);
if (err)
goto out;
}
mem = kmap_atomic(page);
- if (!op_is_write(op)) {
+ if (!op_is_write(opf)) {
copy_from_brd(mem + off, brd, sector, len);
flush_dcache_page(page);
} else {
@@ -296,8 +300,12 @@ static void brd_submit_bio(struct bio *b
(len & (SECTOR_SIZE - 1)));
err = brd_do_bvec(brd, bvec.bv_page, len, bvec.bv_offset,
- bio_op(bio), sector);
+ bio->bi_opf, sector);
if (err) {
+ if (err == -ENOMEM && bio->bi_opf & REQ_NOWAIT) {
+ bio_wouldblock_error(bio);
+ return;
+ }
bio_io_error(bio);
return;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 745/885] ima: fix error handling logic when file measurement failed
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (743 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 744/885] brd: check for REQ_NOWAIT and set correct page allocation mask Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 746/885] ima: Align ima_file_mmap() parameters with mmap_file LSM hook Greg Kroah-Hartman
` (142 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Matt Bobrowski, Mimi Zohar
From: Matt Bobrowski <mattbobrowski@google.com>
commit 6dc387d52eb67f45d68caa263704fa4e39ef8e76 upstream.
Restore the error handling logic so that when file measurement fails,
the respective iint entry is not left with the digest data being
populated with zeroes.
Fixes: 54f03916fb89 ("ima: permit fsverity's file digests in the IMA measurement list")
Cc: stable@vger.kernel.org # 5.19
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
security/integrity/ima/ima_api.c | 2 +-
security/integrity/ima/ima_main.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/security/integrity/ima/ima_api.c
+++ b/security/integrity/ima/ima_api.c
@@ -292,7 +292,7 @@ int ima_collect_measurement(struct integ
result = ima_calc_file_hash(file, &hash.hdr);
}
- if (result == -ENOMEM)
+ if (result && result != -EBADF && result != -EINVAL)
goto out;
length = sizeof(hash.hdr) + hash.hdr.length;
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -335,7 +335,7 @@ static int process_measurement(struct fi
hash_algo = ima_get_hash_algo(xattr_value, xattr_len);
rc = ima_collect_measurement(iint, file, buf, size, hash_algo, modsig);
- if (rc == -ENOMEM)
+ if (rc != 0 && rc != -EBADF && rc != -EINVAL)
goto out_locked;
if (!pathbuf) /* ima_rdwr_violation possibly pre-fetched */
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 746/885] ima: Align ima_file_mmap() parameters with mmap_file LSM hook
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (744 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 745/885] ima: fix error handling logic when file measurement failed Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 747/885] powerpc/boot: Dont always pass -mcpu=powerpc when building 32-bit uImage Greg Kroah-Hartman
` (141 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Roberto Sassu, Stefan Berger, Mimi Zohar
From: Roberto Sassu <roberto.sassu@huawei.com>
commit 4971c268b85e1c7a734a61622fc0813c86e2362e upstream.
Commit 98de59bfe4b2f ("take calculation of final prot in
security_mmap_file() into a helper") moved the code to update prot, to be
the actual protections applied to the kernel, to a new helper called
mmap_prot().
However, while without the helper ima_file_mmap() was getting the updated
prot, with the helper ima_file_mmap() gets the original prot, which
contains the protections requested by the application.
A possible consequence of this change is that, if an application calls
mmap() with only PROT_READ, and the kernel applies PROT_EXEC in addition,
that application would have access to executable memory without having this
event recorded in the IMA measurement list. This situation would occur for
example if the application, before mmap(), calls the personality() system
call with READ_IMPLIES_EXEC as the first argument.
Align ima_file_mmap() parameters with those of the mmap_file LSM hook, so
that IMA can receive both the requested prot and the final prot. Since the
requested protections are stored in a new variable, and the final
protections are stored in the existing variable, this effectively restores
the original behavior of the MMAP_CHECK hook.
Cc: stable@vger.kernel.org
Fixes: 98de59bfe4b2 ("take calculation of final prot in security_mmap_file() into a helper")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/ima.h | 6 ++++--
security/integrity/ima/ima_main.c | 7 +++++--
security/security.c | 7 ++++---
3 files changed, 13 insertions(+), 7 deletions(-)
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -21,7 +21,8 @@ extern int ima_file_check(struct file *f
extern void ima_post_create_tmpfile(struct user_namespace *mnt_userns,
struct inode *inode);
extern void ima_file_free(struct file *file);
-extern int ima_file_mmap(struct file *file, unsigned long prot);
+extern int ima_file_mmap(struct file *file, unsigned long reqprot,
+ unsigned long prot, unsigned long flags);
extern int ima_file_mprotect(struct vm_area_struct *vma, unsigned long prot);
extern int ima_load_data(enum kernel_load_data_id id, bool contents);
extern int ima_post_load_data(char *buf, loff_t size,
@@ -76,7 +77,8 @@ static inline void ima_file_free(struct
return;
}
-static inline int ima_file_mmap(struct file *file, unsigned long prot)
+static inline int ima_file_mmap(struct file *file, unsigned long reqprot,
+ unsigned long prot, unsigned long flags)
{
return 0;
}
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -395,7 +395,9 @@ out:
/**
* ima_file_mmap - based on policy, collect/store measurement.
* @file: pointer to the file to be measured (May be NULL)
- * @prot: contains the protection that will be applied by the kernel.
+ * @reqprot: protection requested by the application
+ * @prot: protection that will be applied by the kernel
+ * @flags: operational flags
*
* Measure files being mmapped executable based on the ima_must_measure()
* policy decision.
@@ -403,7 +405,8 @@ out:
* On success return 0. On integrity appraisal error, assuming the file
* is in policy and IMA-appraisal is in enforcing mode, return -EACCES.
*/
-int ima_file_mmap(struct file *file, unsigned long prot)
+int ima_file_mmap(struct file *file, unsigned long reqprot,
+ unsigned long prot, unsigned long flags)
{
u32 secid;
--- a/security/security.c
+++ b/security/security.c
@@ -1591,12 +1591,13 @@ static inline unsigned long mmap_prot(st
int security_mmap_file(struct file *file, unsigned long prot,
unsigned long flags)
{
+ unsigned long prot_adj = mmap_prot(file, prot);
int ret;
- ret = call_int_hook(mmap_file, 0, file, prot,
- mmap_prot(file, prot), flags);
+
+ ret = call_int_hook(mmap_file, 0, file, prot, prot_adj, flags);
if (ret)
return ret;
- return ima_file_mmap(file, prot);
+ return ima_file_mmap(file, prot, prot_adj, flags);
}
int security_mmap_addr(unsigned long addr)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 747/885] powerpc/boot: Dont always pass -mcpu=powerpc when building 32-bit uImage
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (745 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 746/885] ima: Align ima_file_mmap() parameters with mmap_file LSM hook Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 748/885] selftests/powerpc: Fix incorrect kernel headers search path Greg Kroah-Hartman
` (140 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pali Rohár, Christophe Leroy,
Michael Ellerman
From: Pali Rohár <pali@kernel.org>
commit ff7c76f66d8bad4e694c264c789249e1d3a8205d upstream.
When CONFIG_TARGET_CPU is specified then pass its value to the compiler
-mcpu option. This fixes following build error when building kernel with
powerpc e500 SPE capable cross compilers:
BOOTAS arch/powerpc/boot/crt0.o
powerpc-linux-gnuspe-gcc: error: unrecognized argument in option ‘-mcpu=powerpc’
powerpc-linux-gnuspe-gcc: note: valid arguments to ‘-mcpu=’ are: 8540 8548 native
make[1]: *** [arch/powerpc/boot/Makefile:231: arch/powerpc/boot/crt0.o] Error 1
Similar change was already introduced for the main powerpc Makefile in
commit 446cda1b21d9 ("powerpc/32: Don't always pass -mcpu=powerpc to the
compiler").
Fixes: 40a75584e526 ("powerpc/boot: Build wrapper for an appropriate CPU")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2ae3ae5887babfdacc34435bff0944b3f336100a.1674632329.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/boot/Makefile | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index d32d95aea5d6..295f76df13b5 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -39,13 +39,19 @@ BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
$(LINUXINCLUDE)
ifdef CONFIG_PPC64_BOOT_WRAPPER
-ifdef CONFIG_CPU_LITTLE_ENDIAN
-BOOTCFLAGS += -m64 -mcpu=powerpc64le
+BOOTCFLAGS += -m64
else
-BOOTCFLAGS += -m64 -mcpu=powerpc64
+BOOTCFLAGS += -m32
endif
+
+ifdef CONFIG_TARGET_CPU_BOOL
+BOOTCFLAGS += -mcpu=$(CONFIG_TARGET_CPU)
+else ifdef CONFIG_PPC64_BOOT_WRAPPER
+ifdef CONFIG_CPU_LITTLE_ENDIAN
+BOOTCFLAGS += -mcpu=powerpc64le
else
-BOOTCFLAGS += -m32 -mcpu=powerpc
+BOOTCFLAGS += -mcpu=powerpc64
+endif
endif
BOOTCFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include)
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 748/885] selftests/powerpc: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (746 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 747/885] powerpc/boot: Dont always pass -mcpu=powerpc when building 32-bit uImage Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 749/885] selftests/ftrace: Fix eprobe syntax test case to check filter support Greg Kroah-Hartman
` (139 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
Michael Ellerman
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 4f11410bf6da87defe8fd59b0413f0d9f71744da upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230127135755.79929-22-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/powerpc/ptrace/Makefile | 2 +-
tools/testing/selftests/powerpc/security/Makefile | 2 +-
tools/testing/selftests/powerpc/syscalls/Makefile | 2 +-
tools/testing/selftests/powerpc/tm/Makefile | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/powerpc/ptrace/Makefile b/tools/testing/selftests/powerpc/ptrace/Makefile
index 2f02cb54224d..cbeeaeae8837 100644
--- a/tools/testing/selftests/powerpc/ptrace/Makefile
+++ b/tools/testing/selftests/powerpc/ptrace/Makefile
@@ -33,7 +33,7 @@ TESTS_64 := $(patsubst %,$(OUTPUT)/%,$(TESTS_64))
$(TESTS_64): CFLAGS += -m64
$(TM_TESTS): CFLAGS += -I../tm -mhtm
-CFLAGS += -I../../../../../usr/include -fno-pie
+CFLAGS += $(KHDR_INCLUDES) -fno-pie
$(OUTPUT)/ptrace-gpr: ptrace-gpr.S
$(OUTPUT)/ptrace-pkey $(OUTPUT)/core-pkey: LDLIBS += -pthread
diff --git a/tools/testing/selftests/powerpc/security/Makefile b/tools/testing/selftests/powerpc/security/Makefile
index 7488315fd847..e0d979ab0204 100644
--- a/tools/testing/selftests/powerpc/security/Makefile
+++ b/tools/testing/selftests/powerpc/security/Makefile
@@ -5,7 +5,7 @@ TEST_PROGS := mitigation-patching.sh
top_srcdir = ../../../../..
-CFLAGS += -I../../../../../usr/include
+CFLAGS += $(KHDR_INCLUDES)
include ../../lib.mk
diff --git a/tools/testing/selftests/powerpc/syscalls/Makefile b/tools/testing/selftests/powerpc/syscalls/Makefile
index 54ff5cfffc63..ee1740ddfb0c 100644
--- a/tools/testing/selftests/powerpc/syscalls/Makefile
+++ b/tools/testing/selftests/powerpc/syscalls/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
TEST_GEN_PROGS := ipc_unmuxed rtas_filter
-CFLAGS += -I../../../../../usr/include
+CFLAGS += $(KHDR_INCLUDES)
top_srcdir = ../../../../..
include ../../lib.mk
diff --git a/tools/testing/selftests/powerpc/tm/Makefile b/tools/testing/selftests/powerpc/tm/Makefile
index 5881e97c73c1..3876805c2f31 100644
--- a/tools/testing/selftests/powerpc/tm/Makefile
+++ b/tools/testing/selftests/powerpc/tm/Makefile
@@ -17,7 +17,7 @@ $(TEST_GEN_PROGS): ../harness.c ../utils.c
CFLAGS += -mhtm
$(OUTPUT)/tm-syscall: tm-syscall-asm.S
-$(OUTPUT)/tm-syscall: CFLAGS += -I../../../../../usr/include
+$(OUTPUT)/tm-syscall: CFLAGS += $(KHDR_INCLUDES)
$(OUTPUT)/tm-tmspr: CFLAGS += -pthread
$(OUTPUT)/tm-vmx-unavail: CFLAGS += -pthread -m64
$(OUTPUT)/tm-resched-dscr: ../pmu/lib.c
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 749/885] selftests/ftrace: Fix eprobe syntax test case to check filter support
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (747 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 748/885] selftests/powerpc: Fix incorrect kernel headers search path Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 750/885] selftests: sched: Fix incorrect kernel headers search path Greg Kroah-Hartman
` (138 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Masami Hiramatsu (Google),
Steven Rostedt (Google),
Shuah Khan
From: Masami Hiramatsu (Google) <mhiramat@kernel.org>
commit a457e944df92789ab31aaf35fae9db064e3c51c4 upstream.
Fix eprobe syntax test case to check whether the kernel supports the filter
on eprobe for filter syntax test command. Without this fix, this test case
will fail if the kernel supports eprobe but doesn't support the filter on
eprobe.
Link: https://lore.kernel.org/all/167309834742.640500.379128668288448035.stgit@devnote3/
Fixes: 9e14bae7d049 ("selftests/ftrace: Add eprobe syntax error testcase")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
.../selftests/ftrace/test.d/dynevent/eprobes_syntax_errors.tc | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/ftrace/test.d/dynevent/eprobes_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/dynevent/eprobes_syntax_errors.tc
index fc1daac7f066..4f5e8c665156 100644
--- a/tools/testing/selftests/ftrace/test.d/dynevent/eprobes_syntax_errors.tc
+++ b/tools/testing/selftests/ftrace/test.d/dynevent/eprobes_syntax_errors.tc
@@ -22,6 +22,8 @@ check_error 'e:foo/^bar.1 syscalls/sys_enter_openat' # BAD_EVENT_NAME
check_error 'e:foo/bar syscalls/sys_enter_openat arg=^dfd' # BAD_FETCH_ARG
check_error 'e:foo/bar syscalls/sys_enter_openat ^arg=$foo' # BAD_ATTACH_ARG
-check_error 'e:foo/bar syscalls/sys_enter_openat if ^' # NO_EP_FILTER
+if grep -q '<attached-group>\.<attached-event>.*\[if <filter>\]' README; then
+ check_error 'e:foo/bar syscalls/sys_enter_openat if ^' # NO_EP_FILTER
+fi
exit 0
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 750/885] selftests: sched: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (748 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 749/885] selftests/ftrace: Fix eprobe syntax test case to check filter support Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 751/885] selftests: core: " Greg Kroah-Hartman
` (137 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 0d2cace5af50806a6b32ab73d367b80e46acda0f upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/sched/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/sched/Makefile b/tools/testing/selftests/sched/Makefile
index 10c72f14fea9..099ee9213557 100644
--- a/tools/testing/selftests/sched/Makefile
+++ b/tools/testing/selftests/sched/Makefile
@@ -4,7 +4,7 @@ ifneq ($(shell $(CC) --version 2>&1 | head -n 1 | grep clang),)
CLANG_FLAGS += -no-integrated-as
endif
-CFLAGS += -O2 -Wall -g -I./ -I../../../../usr/include/ -Wl,-rpath=./ \
+CFLAGS += -O2 -Wall -g -I./ $(KHDR_INCLUDES) -Wl,-rpath=./ \
$(CLANG_FLAGS)
LDLIBS += -lpthread
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 751/885] selftests: core: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (749 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 750/885] selftests: sched: Fix incorrect kernel headers search path Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 752/885] selftests: pid_namespace: " Greg Kroah-Hartman
` (136 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 145df2fdc38f24b3e52e4c2a59b02d874a074fbd upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/core/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/core/Makefile
+++ b/tools/testing/selftests/core/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-CFLAGS += -g -I../../../../usr/include/
+CFLAGS += -g $(KHDR_INCLUDES)
TEST_GEN_PROGS := close_range_test
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 752/885] selftests: pid_namespace: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (750 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 751/885] selftests: core: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 753/885] selftests: arm64: " Greg Kroah-Hartman
` (135 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit e81ff69f66969a16a98a2e0977c1860f1c182c74 upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/pid_namespace/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/pid_namespace/Makefile
+++ b/tools/testing/selftests/pid_namespace/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS += -g -I../../../../usr/include/
+CFLAGS += -g $(KHDR_INCLUDES)
TEST_GEN_PROGS = regression_enomem
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 753/885] selftests: arm64: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (751 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 752/885] selftests: pid_namespace: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 754/885] selftests: clone3: " Greg Kroah-Hartman
` (134 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan, Catalin Marinas
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 7482c19173b7eb044d476b3444d7ee55bc669d03 upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/arm64/fp/Makefile | 2 +-
tools/testing/selftests/arm64/tags/Makefile | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/tools/testing/selftests/arm64/fp/Makefile
+++ b/tools/testing/selftests/arm64/fp/Makefile
@@ -3,7 +3,7 @@
# A proper top_srcdir is needed by KSFT(lib.mk)
top_srcdir = $(realpath ../../../../../)
-CFLAGS += -I$(top_srcdir)/usr/include/
+CFLAGS += $(KHDR_INCLUDES)
TEST_GEN_PROGS := fp-stress \
sve-ptrace sve-probe-vls \
--- a/tools/testing/selftests/arm64/tags/Makefile
+++ b/tools/testing/selftests/arm64/tags/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS += -I../../../../../usr/include/
+CFLAGS += $(KHDR_INCLUDES)
TEST_GEN_PROGS := tags_test
TEST_PROGS := run_tags_test.sh
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 754/885] selftests: clone3: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (752 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 753/885] selftests: arm64: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 755/885] selftests: pidfd: " Greg Kroah-Hartman
` (133 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan, Christian Brauner
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 612cf4d283414a5ee2733db6608d917deb45fa46 upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/clone3/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/clone3/Makefile
+++ b/tools/testing/selftests/clone3/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS += -g -std=gnu99 -I../../../../usr/include/
+CFLAGS += -g -std=gnu99 $(KHDR_INCLUDES)
LDLIBS += -lcap
TEST_GEN_PROGS := clone3 clone3_clear_sighand clone3_set_tid \
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 755/885] selftests: pidfd: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (753 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 754/885] selftests: clone3: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 756/885] selftests: membarrier: " Greg Kroah-Hartman
` (132 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 3f7d71768795c386019f2295c1986d00035c9f0f upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/pidfd/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/pidfd/Makefile
+++ b/tools/testing/selftests/pidfd/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-CFLAGS += -g -I../../../../usr/include/ -pthread -Wall
+CFLAGS += -g $(KHDR_INCLUDES) -pthread -Wall
TEST_GEN_PROGS := pidfd_test pidfd_fdinfo_test pidfd_open_test \
pidfd_poll_test pidfd_wait pidfd_getfd_test pidfd_setns_test
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 756/885] selftests: membarrier: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (754 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 755/885] selftests: pidfd: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 757/885] selftests: kcmp: " Greg Kroah-Hartman
` (131 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 498bb027726371ba4a94686d251f9be1d437573e upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/membarrier/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/membarrier/Makefile
+++ b/tools/testing/selftests/membarrier/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-CFLAGS += -g -I../../../../usr/include/
+CFLAGS += -g $(KHDR_INCLUDES)
LDLIBS += -lpthread
TEST_GEN_PROGS := membarrier_test_single_thread \
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 757/885] selftests: kcmp: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (755 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 756/885] selftests: membarrier: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 758/885] selftests: media_tests: " Greg Kroah-Hartman
` (130 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 5d74231a2caad259f6669d8d6112814cef6bcd60 upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/kcmp/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/kcmp/Makefile
+++ b/tools/testing/selftests/kcmp/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-CFLAGS += -I../../../../usr/include/
+CFLAGS += $(KHDR_INCLUDES)
TEST_GEN_PROGS := kcmp_test
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 758/885] selftests: media_tests: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (756 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 757/885] selftests: kcmp: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 759/885] selftests: gpio: " Greg Kroah-Hartman
` (129 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit f2f9592b736087f695230410fb8dc1afd3cafbbb upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/media_tests/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/media_tests/Makefile
+++ b/tools/testing/selftests/media_tests/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
#
-CFLAGS += -I../ -I../../../../usr/include/
+CFLAGS += -I../ $(KHDR_INCLUDES)
TEST_GEN_PROGS := media_device_test media_device_open video_device_test
include ../lib.mk
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 759/885] selftests: gpio: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (757 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 758/885] selftests: media_tests: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 760/885] selftests: filesystems: " Greg Kroah-Hartman
` (128 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 8bb9c1808628babcc7b99ec2439bf102379bd4ac upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/gpio/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/gpio/Makefile
+++ b/tools/testing/selftests/gpio/Makefile
@@ -3,6 +3,6 @@
TEST_PROGS := gpio-mockup.sh gpio-sim.sh
TEST_FILES := gpio-mockup-sysfs.sh
TEST_GEN_PROGS_EXTENDED := gpio-mockup-cdev gpio-chip-info gpio-line-name
-CFLAGS += -O2 -g -Wall -I../../../../usr/include/ $(KHDR_INCLUDES)
+CFLAGS += -O2 -g -Wall $(KHDR_INCLUDES)
include ../lib.mk
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 760/885] selftests: filesystems: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (758 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 759/885] selftests: gpio: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 761/885] selftests: user_events: " Greg Kroah-Hartman
` (127 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit c2d3cf3653a8ff6e4b402d55e7f84790ac08a8ad upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/filesystems/Makefile | 2 +-
tools/testing/selftests/filesystems/binderfs/Makefile | 2 +-
tools/testing/selftests/filesystems/epoll/Makefile | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
--- a/tools/testing/selftests/filesystems/Makefile
+++ b/tools/testing/selftests/filesystems/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS += -I../../../../usr/include/
+CFLAGS += $(KHDR_INCLUDES)
TEST_GEN_PROGS := devpts_pts
TEST_GEN_PROGS_EXTENDED := dnotify_test
--- a/tools/testing/selftests/filesystems/binderfs/Makefile
+++ b/tools/testing/selftests/filesystems/binderfs/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS += -I../../../../../usr/include/ -pthread
+CFLAGS += $(KHDR_INCLUDES) -pthread
TEST_GEN_PROGS := binderfs_test
binderfs_test: binderfs_test.c ../../kselftest.h ../../kselftest_harness.h
--- a/tools/testing/selftests/filesystems/epoll/Makefile
+++ b/tools/testing/selftests/filesystems/epoll/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS += -I../../../../../usr/include/
+CFLAGS += $(KHDR_INCLUDES)
LDLIBS += -lpthread
TEST_GEN_PROGS := epoll_wakeup_test
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 761/885] selftests: user_events: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (759 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 760/885] selftests: filesystems: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 762/885] selftests: ptp: " Greg Kroah-Hartman
` (126 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit f3886fd28987c119a98493f625cb9940b5f1c9a0 upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/user_events/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/user_events/Makefile
+++ b/tools/testing/selftests/user_events/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS += -Wl,-no-as-needed -Wall -I../../../../usr/include
+CFLAGS += -Wl,-no-as-needed -Wall $(KHDR_INCLUDES)
LDLIBS += -lrt -lpthread -lm
TEST_GEN_PROGS = ftrace_test dyn_test perf_test
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 762/885] selftests: ptp: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (760 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 761/885] selftests: user_events: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 763/885] selftests: sync: " Greg Kroah-Hartman
` (125 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 01ede99e9de16e7a1ed689c99f41022aa878f2f4 upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/ptp/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/ptp/Makefile
+++ b/tools/testing/selftests/ptp/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS += -I../../../../usr/include/
+CFLAGS += $(KHDR_INCLUDES)
TEST_PROGS := testptp
LDLIBS += -lrt
all: $(TEST_PROGS)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 763/885] selftests: sync: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (761 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 762/885] selftests: ptp: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 764/885] selftests: rseq: " Greg Kroah-Hartman
` (124 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 5ad0c8e42c13623bd996e19ce76f2596e16eb0db upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/sync/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/sync/Makefile
+++ b/tools/testing/selftests/sync/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
CFLAGS += -O2 -g -std=gnu89 -pthread -Wall -Wextra
-CFLAGS += -I../../../../usr/include/
+CFLAGS += $(KHDR_INCLUDES)
LDFLAGS += -pthread
.PHONY: all clean
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 764/885] selftests: rseq: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (762 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 763/885] selftests: sync: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 765/885] selftests: move_mount_set_group: " Greg Kroah-Hartman
` (123 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 2279bfc03211045c8f43a76b01889a5ca86acd5a upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/rseq/Makefile
+++ b/tools/testing/selftests/rseq/Makefile
@@ -4,7 +4,7 @@ ifneq ($(shell $(CC) --version 2>&1 | he
CLANG_FLAGS += -no-integrated-as
endif
-CFLAGS += -O2 -Wall -g -I./ -I../../../../usr/include/ -L$(OUTPUT) -Wl,-rpath=./ \
+CFLAGS += -O2 -Wall -g -I./ $(KHDR_INCLUDES) -L$(OUTPUT) -Wl,-rpath=./ \
$(CLANG_FLAGS)
LDLIBS += -lpthread -ldl
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 765/885] selftests: move_mount_set_group: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (763 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 764/885] selftests: rseq: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 766/885] selftests: mount_setattr: " Greg Kroah-Hartman
` (122 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 65c68af0131bfef8e395c325735b6c40638cb931 upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/move_mount_set_group/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/move_mount_set_group/Makefile
+++ b/tools/testing/selftests/move_mount_set_group/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for mount selftests.
-CFLAGS = -g -I../../../../usr/include/ -Wall -O2
+CFLAGS = -g $(KHDR_INCLUDES) -Wall -O2
TEST_GEN_FILES += move_mount_set_group_test
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 766/885] selftests: mount_setattr: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (764 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 765/885] selftests: move_mount_set_group: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 767/885] selftests: perf_events: " Greg Kroah-Hartman
` (121 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 5d11f2d0eb39d2b5c5e8f05e1f650c4a4de69918 upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/mount_setattr/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/mount_setattr/Makefile
+++ b/tools/testing/selftests/mount_setattr/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for mount selftests.
-CFLAGS = -g -I../../../../usr/include/ -Wall -O2 -pthread
+CFLAGS = -g $(KHDR_INCLUDES) -Wall -O2 -pthread
TEST_GEN_FILES += mount_setattr_test
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 767/885] selftests: perf_events: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (765 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 766/885] selftests: mount_setattr: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 768/885] selftests: ipc: " Greg Kroah-Hartman
` (120 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 465cbb1b9a9fd5f6907adb2d761facaf1a46bfbe upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/perf_events/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/perf_events/Makefile
+++ b/tools/testing/selftests/perf_events/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS += -Wl,-no-as-needed -Wall -I../../../../usr/include
+CFLAGS += -Wl,-no-as-needed -Wall $(KHDR_INCLUDES)
LDFLAGS += -lpthread
TEST_GEN_PROGS := sigtrap_threads remove_on_exec
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 768/885] selftests: ipc: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (766 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 767/885] selftests: perf_events: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 769/885] selftests: futex: " Greg Kroah-Hartman
` (119 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit ecf9fdb5c2a9d63c732acccb6318feb73dd1589f upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/ipc/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/ipc/Makefile
+++ b/tools/testing/selftests/ipc/Makefile
@@ -10,7 +10,7 @@ ifeq ($(ARCH),x86_64)
CFLAGS := -DCONFIG_X86_64 -D__x86_64__
endif
-CFLAGS += -I../../../../usr/include/
+CFLAGS += $(KHDR_INCLUDES)
TEST_GEN_PROGS := msgque
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 769/885] selftests: futex: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (767 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 768/885] selftests: ipc: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 770/885] selftests: drivers: " Greg Kroah-Hartman
` (118 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 24c55275ba0d538def2b1220002d0e808a85d50f upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/futex/functional/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/futex/functional/Makefile
+++ b/tools/testing/selftests/futex/functional/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-INCLUDES := -I../include -I../../ -I../../../../../usr/include/
+INCLUDES := -I../include -I../../ $(KHDR_INCLUDES)
CFLAGS := $(CFLAGS) -g -O2 -Wall -D_GNU_SOURCE -pthread $(INCLUDES) $(KHDR_INCLUDES)
LDLIBS := -lpthread -lrt
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 770/885] selftests: drivers: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (768 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 769/885] selftests: futex: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 771/885] selftests: dmabuf-heaps: " Greg Kroah-Hartman
` (117 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 07f0148aafe8c95a3a76cd59e9e75b4d78d1d31d upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/drivers/dma-buf/Makefile | 2 +-
tools/testing/selftests/drivers/s390x/uvdevice/Makefile | 3 +--
2 files changed, 2 insertions(+), 3 deletions(-)
--- a/tools/testing/selftests/drivers/dma-buf/Makefile
+++ b/tools/testing/selftests/drivers/dma-buf/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-CFLAGS += -I../../../../../usr/include/
+CFLAGS += $(KHDR_INCLUDES)
TEST_GEN_PROGS := udmabuf
--- a/tools/testing/selftests/drivers/s390x/uvdevice/Makefile
+++ b/tools/testing/selftests/drivers/s390x/uvdevice/Makefile
@@ -11,10 +11,9 @@ else
TEST_GEN_PROGS := test_uvdevice
top_srcdir ?= ../../../../../..
-khdr_dir = $(top_srcdir)/usr/include
LINUX_TOOL_ARCH_INCLUDE = $(top_srcdir)/tools/arch/$(ARCH)/include
-CFLAGS += -Wall -Werror -static -I$(khdr_dir) -I$(LINUX_TOOL_ARCH_INCLUDE)
+CFLAGS += -Wall -Werror -static $(KHDR_INCLUDES) -I$(LINUX_TOOL_ARCH_INCLUDE)
include ../../../lib.mk
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 771/885] selftests: dmabuf-heaps: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (769 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 770/885] selftests: drivers: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 772/885] selftests: vm: " Greg Kroah-Hartman
` (116 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit f80f09b59fdd45753dd80ac623981ad00ece4c2d upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/dmabuf-heaps/Makefile | 2 +-
tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c | 3 +--
2 files changed, 2 insertions(+), 3 deletions(-)
--- a/tools/testing/selftests/dmabuf-heaps/Makefile
+++ b/tools/testing/selftests/dmabuf-heaps/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS += -static -O3 -Wl,-no-as-needed -Wall
+CFLAGS += -static -O3 -Wl,-no-as-needed -Wall $(KHDR_INCLUDES)
TEST_GEN_PROGS = dmabuf-heap
--- a/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c
+++ b/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c
@@ -13,10 +13,9 @@
#include <sys/types.h>
#include <linux/dma-buf.h>
+#include <linux/dma-heap.h>
#include <drm/drm.h>
-#include "../../../../include/uapi/linux/dma-heap.h"
-
#define DEVPATH "/dev/dma_heap"
static int check_vgem(int fd)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 772/885] selftests: vm: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (770 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 771/885] selftests: dmabuf-heaps: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 773/885] selftests: seccomp: " Greg Kroah-Hartman
` (115 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 8eb3751c73bec746f61fb6bada60d1074d92b8c3 upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/vm/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/vm/Makefile
+++ b/tools/testing/selftests/vm/Makefile
@@ -23,7 +23,7 @@ MACHINE ?= $(shell echo $(uname_M) | sed
# LDLIBS.
MAKEFLAGS += --no-builtin-rules
-CFLAGS = -Wall -I $(top_srcdir) -I $(top_srcdir)/usr/include $(EXTRA_CFLAGS) $(KHDR_INCLUDES)
+CFLAGS = -Wall -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES)
LDLIBS = -lrt -lpthread
TEST_GEN_FILES = compaction_test
TEST_GEN_FILES += gup_test
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 773/885] selftests: seccomp: Fix incorrect kernel headers search path
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (771 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 772/885] selftests: vm: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 774/885] irqdomain: Fix association race Greg Kroah-Hartman
` (114 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mathieu Desnoyers, Shuah Khan,
linux-kselftest, Ingo Molnar, Shuah Khan
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 07d42dd854446ba3177ad7a217870a5b4edee165 upstream.
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/seccomp/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/seccomp/Makefile
+++ b/tools/testing/selftests/seccomp/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS += -Wl,-no-as-needed -Wall -isystem ../../../../usr/include/
+CFLAGS += -Wl,-no-as-needed -Wall $(KHDR_INCLUDES)
LDFLAGS += -lpthread
LDLIBS += -lcap
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 774/885] irqdomain: Fix association race
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (772 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 773/885] selftests: seccomp: " Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 775/885] irqdomain: Fix disassociation race Greg Kroah-Hartman
` (113 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hsin-Yi Wang, Mark-PK Tsai,
Johan Hovold, Marc Zyngier
From: Johan Hovold <johan+linaro@kernel.org>
commit b06730a571a9ff1ba5bd6b20bf9e50e5a12f1ec6 upstream.
The sanity check for an already mapped virq is done outside of the
irq_domain_mutex-protected section which means that an (unlikely) racing
association may not be detected.
Fix this by factoring out the association implementation, which will
also be used in a follow-on change to fix a shared-interrupt mapping
race.
Fixes: ddaf144c61da ("irqdomain: Refactor irq_domain_associate_many()")
Cc: stable@vger.kernel.org # 3.11
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/irq/irqdomain.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -559,8 +559,8 @@ static void irq_domain_disassociate(stru
irq_domain_clear_mapping(domain, hwirq);
}
-int irq_domain_associate(struct irq_domain *domain, unsigned int virq,
- irq_hw_number_t hwirq)
+static int irq_domain_associate_locked(struct irq_domain *domain, unsigned int virq,
+ irq_hw_number_t hwirq)
{
struct irq_data *irq_data = irq_get_irq_data(virq);
int ret;
@@ -573,7 +573,6 @@ int irq_domain_associate(struct irq_doma
if (WARN(irq_data->domain, "error: virq%i is already associated", virq))
return -EINVAL;
- mutex_lock(&irq_domain_mutex);
irq_data->hwirq = hwirq;
irq_data->domain = domain;
if (domain->ops->map) {
@@ -590,7 +589,6 @@ int irq_domain_associate(struct irq_doma
}
irq_data->domain = NULL;
irq_data->hwirq = 0;
- mutex_unlock(&irq_domain_mutex);
return ret;
}
@@ -601,12 +599,23 @@ int irq_domain_associate(struct irq_doma
domain->mapcount++;
irq_domain_set_mapping(domain, hwirq, irq_data);
- mutex_unlock(&irq_domain_mutex);
irq_clear_status_flags(virq, IRQ_NOREQUEST);
return 0;
}
+
+int irq_domain_associate(struct irq_domain *domain, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ int ret;
+
+ mutex_lock(&irq_domain_mutex);
+ ret = irq_domain_associate_locked(domain, virq, hwirq);
+ mutex_unlock(&irq_domain_mutex);
+
+ return ret;
+}
EXPORT_SYMBOL_GPL(irq_domain_associate);
void irq_domain_associate_many(struct irq_domain *domain, unsigned int irq_base,
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 775/885] irqdomain: Fix disassociation race
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (773 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 774/885] irqdomain: Fix association race Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 776/885] irqdomain: Look for existing mapping only once Greg Kroah-Hartman
` (112 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hsin-Yi Wang, Mark-PK Tsai,
Johan Hovold, Marc Zyngier
From: Johan Hovold <johan+linaro@kernel.org>
commit 3f883c38f5628f46b30bccf090faec054088e262 upstream.
The global irq_domain_mutex is held when mapping interrupts from
non-hierarchical domains but currently not when disposing them.
This specifically means that updates of the domain mapcount is racy
(currently only used for statistics in debugfs).
Make sure to hold the global irq_domain_mutex also when disposing
mappings from non-hierarchical domains.
Fixes: 9dc6be3d4193 ("genirq/irqdomain: Add map counter")
Cc: stable@vger.kernel.org # 4.13
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/irq/irqdomain.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -538,6 +538,9 @@ static void irq_domain_disassociate(stru
return;
hwirq = irq_data->hwirq;
+
+ mutex_lock(&irq_domain_mutex);
+
irq_set_status_flags(irq, IRQ_NOREQUEST);
/* remove chip and handler */
@@ -557,6 +560,8 @@ static void irq_domain_disassociate(stru
/* Clear reverse map for this hwirq */
irq_domain_clear_mapping(domain, hwirq);
+
+ mutex_unlock(&irq_domain_mutex);
}
static int irq_domain_associate_locked(struct irq_domain *domain, unsigned int virq,
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 776/885] irqdomain: Look for existing mapping only once
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (774 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 775/885] irqdomain: Fix disassociation race Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 777/885] irqdomain: Drop bogus fwspec-mapping error handling Greg Kroah-Hartman
` (111 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hsin-Yi Wang, Mark-PK Tsai,
Johan Hovold, Marc Zyngier
From: Johan Hovold <johan+linaro@kernel.org>
commit 6e6f75c9c98d2d246d90411ff2b6f0cd271f4cba upstream.
Avoid looking for an existing mapping twice when creating a new mapping
using irq_create_fwspec_mapping() by factoring out the actual allocation
which is shared with irq_create_mapping_affinity().
The new helper function will also be used to fix a shared-interrupt
mapping race, hence the Fixes tag.
Fixes: b62b2cf5759b ("irqdomain: Fix handling of type settings for existing mappings")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-5-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/irq/irqdomain.c | 60 ++++++++++++++++++++++++++-----------------------
1 file changed, 33 insertions(+), 27 deletions(-)
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -682,6 +682,34 @@ unsigned int irq_create_direct_mapping(s
EXPORT_SYMBOL_GPL(irq_create_direct_mapping);
#endif
+static unsigned int __irq_create_mapping_affinity(struct irq_domain *domain,
+ irq_hw_number_t hwirq,
+ const struct irq_affinity_desc *affinity)
+{
+ struct device_node *of_node = irq_domain_get_of_node(domain);
+ int virq;
+
+ pr_debug("irq_create_mapping(0x%p, 0x%lx)\n", domain, hwirq);
+
+ /* Allocate a virtual interrupt number */
+ virq = irq_domain_alloc_descs(-1, 1, hwirq, of_node_to_nid(of_node),
+ affinity);
+ if (virq <= 0) {
+ pr_debug("-> virq allocation failed\n");
+ return 0;
+ }
+
+ if (irq_domain_associate(domain, virq, hwirq)) {
+ irq_free_desc(virq);
+ return 0;
+ }
+
+ pr_debug("irq %lu on domain %s mapped to virtual irq %u\n",
+ hwirq, of_node_full_name(of_node), virq);
+
+ return virq;
+}
+
/**
* irq_create_mapping_affinity() - Map a hardware interrupt into linux irq space
* @domain: domain owning this hardware interrupt or NULL for default domain
@@ -694,14 +722,11 @@ EXPORT_SYMBOL_GPL(irq_create_direct_mapp
* on the number returned from that call.
*/
unsigned int irq_create_mapping_affinity(struct irq_domain *domain,
- irq_hw_number_t hwirq,
- const struct irq_affinity_desc *affinity)
+ irq_hw_number_t hwirq,
+ const struct irq_affinity_desc *affinity)
{
- struct device_node *of_node;
int virq;
- pr_debug("irq_create_mapping(0x%p, 0x%lx)\n", domain, hwirq);
-
/* Look for default domain if necessary */
if (domain == NULL)
domain = irq_default_domain;
@@ -709,34 +734,15 @@ unsigned int irq_create_mapping_affinity
WARN(1, "%s(, %lx) called with NULL domain\n", __func__, hwirq);
return 0;
}
- pr_debug("-> using domain @%p\n", domain);
-
- of_node = irq_domain_get_of_node(domain);
/* Check if mapping already exists */
virq = irq_find_mapping(domain, hwirq);
if (virq) {
- pr_debug("-> existing mapping on virq %d\n", virq);
+ pr_debug("existing mapping on virq %d\n", virq);
return virq;
}
- /* Allocate a virtual interrupt number */
- virq = irq_domain_alloc_descs(-1, 1, hwirq, of_node_to_nid(of_node),
- affinity);
- if (virq <= 0) {
- pr_debug("-> virq allocation failed\n");
- return 0;
- }
-
- if (irq_domain_associate(domain, virq, hwirq)) {
- irq_free_desc(virq);
- return 0;
- }
-
- pr_debug("irq %lu on domain %s mapped to virtual irq %u\n",
- hwirq, of_node_full_name(of_node), virq);
-
- return virq;
+ return __irq_create_mapping_affinity(domain, hwirq, affinity);
}
EXPORT_SYMBOL_GPL(irq_create_mapping_affinity);
@@ -841,7 +847,7 @@ unsigned int irq_create_fwspec_mapping(s
return 0;
} else {
/* Create mapping */
- virq = irq_create_mapping(domain, hwirq);
+ virq = __irq_create_mapping_affinity(domain, hwirq, NULL);
if (!virq)
return virq;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 777/885] irqdomain: Drop bogus fwspec-mapping error handling
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (775 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 776/885] irqdomain: Look for existing mapping only once Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 778/885] irqdomain: Refactor __irq_domain_alloc_irqs() Greg Kroah-Hartman
` (110 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hsin-Yi Wang, Mark-PK Tsai,
Johan Hovold, Marc Zyngier
From: Johan Hovold <johan+linaro@kernel.org>
commit e3b7ab025e931accdc2c12acf9b75c6197f1c062 upstream.
In case a newly allocated IRQ ever ends up not having any associated
struct irq_data it would not even be possible to dispose the mapping.
Replace the bogus disposal with a WARN_ON().
This will also be used to fix a shared-interrupt mapping race, hence the
CC-stable tag.
Fixes: 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/irq/irqdomain.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -853,13 +853,8 @@ unsigned int irq_create_fwspec_mapping(s
}
irq_data = irq_get_irq_data(virq);
- if (!irq_data) {
- if (irq_domain_is_hierarchy(domain))
- irq_domain_free_irqs(virq, 1);
- else
- irq_dispose_mapping(virq);
+ if (WARN_ON(!irq_data))
return 0;
- }
/* Store trigger type */
irqd_set_trigger_type(irq_data, type);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 778/885] irqdomain: Refactor __irq_domain_alloc_irqs()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (776 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 777/885] irqdomain: Drop bogus fwspec-mapping error handling Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 779/885] irqdomain: Fix mapping-creation race Greg Kroah-Hartman
` (109 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hsin-Yi Wang, Mark-PK Tsai,
Johan Hovold, Marc Zyngier
From: Johan Hovold <johan+linaro@kernel.org>
commit d55f7f4c58c07beb5050a834bf57ae2ede599c7e upstream.
Refactor __irq_domain_alloc_irqs() so that it can be called internally
while holding the irq_domain_mutex.
This will be used to fix a shared-interrupt mapping race, hence the
Fixes tag.
Fixes: b62b2cf5759b ("irqdomain: Fix handling of type settings for existing mappings")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-6-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/irq/irqdomain.c | 88 ++++++++++++++++++++++++++-----------------------
1 file changed, 48 insertions(+), 40 deletions(-)
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -1441,40 +1441,12 @@ int irq_domain_alloc_irqs_hierarchy(stru
return domain->ops->alloc(domain, irq_base, nr_irqs, arg);
}
-/**
- * __irq_domain_alloc_irqs - Allocate IRQs from domain
- * @domain: domain to allocate from
- * @irq_base: allocate specified IRQ number if irq_base >= 0
- * @nr_irqs: number of IRQs to allocate
- * @node: NUMA node id for memory allocation
- * @arg: domain specific argument
- * @realloc: IRQ descriptors have already been allocated if true
- * @affinity: Optional irq affinity mask for multiqueue devices
- *
- * Allocate IRQ numbers and initialized all data structures to support
- * hierarchy IRQ domains.
- * Parameter @realloc is mainly to support legacy IRQs.
- * Returns error code or allocated IRQ number
- *
- * The whole process to setup an IRQ has been split into two steps.
- * The first step, __irq_domain_alloc_irqs(), is to allocate IRQ
- * descriptor and required hardware resources. The second step,
- * irq_domain_activate_irq(), is to program the hardware with preallocated
- * resources. In this way, it's easier to rollback when failing to
- * allocate resources.
- */
-int __irq_domain_alloc_irqs(struct irq_domain *domain, int irq_base,
- unsigned int nr_irqs, int node, void *arg,
- bool realloc, const struct irq_affinity_desc *affinity)
+static int irq_domain_alloc_irqs_locked(struct irq_domain *domain, int irq_base,
+ unsigned int nr_irqs, int node, void *arg,
+ bool realloc, const struct irq_affinity_desc *affinity)
{
int i, ret, virq;
- if (domain == NULL) {
- domain = irq_default_domain;
- if (WARN(!domain, "domain is NULL; cannot allocate IRQ\n"))
- return -EINVAL;
- }
-
if (realloc && irq_base >= 0) {
virq = irq_base;
} else {
@@ -1493,24 +1465,18 @@ int __irq_domain_alloc_irqs(struct irq_d
goto out_free_desc;
}
- mutex_lock(&irq_domain_mutex);
ret = irq_domain_alloc_irqs_hierarchy(domain, virq, nr_irqs, arg);
- if (ret < 0) {
- mutex_unlock(&irq_domain_mutex);
+ if (ret < 0)
goto out_free_irq_data;
- }
for (i = 0; i < nr_irqs; i++) {
ret = irq_domain_trim_hierarchy(virq + i);
- if (ret) {
- mutex_unlock(&irq_domain_mutex);
+ if (ret)
goto out_free_irq_data;
- }
}
-
+
for (i = 0; i < nr_irqs; i++)
irq_domain_insert_irq(virq + i);
- mutex_unlock(&irq_domain_mutex);
return virq;
@@ -1520,6 +1486,48 @@ out_free_desc:
irq_free_descs(virq, nr_irqs);
return ret;
}
+
+/**
+ * __irq_domain_alloc_irqs - Allocate IRQs from domain
+ * @domain: domain to allocate from
+ * @irq_base: allocate specified IRQ number if irq_base >= 0
+ * @nr_irqs: number of IRQs to allocate
+ * @node: NUMA node id for memory allocation
+ * @arg: domain specific argument
+ * @realloc: IRQ descriptors have already been allocated if true
+ * @affinity: Optional irq affinity mask for multiqueue devices
+ *
+ * Allocate IRQ numbers and initialized all data structures to support
+ * hierarchy IRQ domains.
+ * Parameter @realloc is mainly to support legacy IRQs.
+ * Returns error code or allocated IRQ number
+ *
+ * The whole process to setup an IRQ has been split into two steps.
+ * The first step, __irq_domain_alloc_irqs(), is to allocate IRQ
+ * descriptor and required hardware resources. The second step,
+ * irq_domain_activate_irq(), is to program the hardware with preallocated
+ * resources. In this way, it's easier to rollback when failing to
+ * allocate resources.
+ */
+int __irq_domain_alloc_irqs(struct irq_domain *domain, int irq_base,
+ unsigned int nr_irqs, int node, void *arg,
+ bool realloc, const struct irq_affinity_desc *affinity)
+{
+ int ret;
+
+ if (domain == NULL) {
+ domain = irq_default_domain;
+ if (WARN(!domain, "domain is NULL; cannot allocate IRQ\n"))
+ return -EINVAL;
+ }
+
+ mutex_lock(&irq_domain_mutex);
+ ret = irq_domain_alloc_irqs_locked(domain, irq_base, nr_irqs, node, arg,
+ realloc, affinity);
+ mutex_unlock(&irq_domain_mutex);
+
+ return ret;
+}
EXPORT_SYMBOL_GPL(__irq_domain_alloc_irqs);
/* The irq_data was moved, fix the revmap to refer to the new location */
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 779/885] irqdomain: Fix mapping-creation race
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (777 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 778/885] irqdomain: Refactor __irq_domain_alloc_irqs() Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 780/885] irqdomain: Fix domain registration race Greg Kroah-Hartman
` (108 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Torokhov, Jon Hunter,
Hsin-Yi Wang, Mark-PK Tsai, Johan Hovold, Marc Zyngier
From: Johan Hovold <johan+linaro@kernel.org>
commit 601363cc08da25747feb87c55573dd54de91d66a upstream.
Parallel probing of devices that share interrupts (e.g. when a driver
uses asynchronous probing) can currently result in two mappings for the
same hardware interrupt to be created due to missing serialisation.
Make sure to hold the irq_domain_mutex when creating mappings so that
looking for an existing mapping before creating a new one is done
atomically.
Fixes: 765230b5f084 ("driver-core: add asynchronous probing support for drivers")
Fixes: b62b2cf5759b ("irqdomain: Fix handling of type settings for existing mappings")
Link: https://lore.kernel.org/r/YuJXMHoT4ijUxnRb@hovoldconsulting.com
Cc: stable@vger.kernel.org # 4.8
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-7-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/irq/irqdomain.c | 64 +++++++++++++++++++++++++++++++++++--------------
1 file changed, 46 insertions(+), 18 deletions(-)
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -25,6 +25,9 @@ static DEFINE_MUTEX(irq_domain_mutex);
static struct irq_domain *irq_default_domain;
+static int irq_domain_alloc_irqs_locked(struct irq_domain *domain, int irq_base,
+ unsigned int nr_irqs, int node, void *arg,
+ bool realloc, const struct irq_affinity_desc *affinity);
static void irq_domain_check_hierarchy(struct irq_domain *domain);
struct irqchip_fwid {
@@ -682,9 +685,9 @@ unsigned int irq_create_direct_mapping(s
EXPORT_SYMBOL_GPL(irq_create_direct_mapping);
#endif
-static unsigned int __irq_create_mapping_affinity(struct irq_domain *domain,
- irq_hw_number_t hwirq,
- const struct irq_affinity_desc *affinity)
+static unsigned int irq_create_mapping_affinity_locked(struct irq_domain *domain,
+ irq_hw_number_t hwirq,
+ const struct irq_affinity_desc *affinity)
{
struct device_node *of_node = irq_domain_get_of_node(domain);
int virq;
@@ -699,7 +702,7 @@ static unsigned int __irq_create_mapping
return 0;
}
- if (irq_domain_associate(domain, virq, hwirq)) {
+ if (irq_domain_associate_locked(domain, virq, hwirq)) {
irq_free_desc(virq);
return 0;
}
@@ -735,14 +738,20 @@ unsigned int irq_create_mapping_affinity
return 0;
}
+ mutex_lock(&irq_domain_mutex);
+
/* Check if mapping already exists */
virq = irq_find_mapping(domain, hwirq);
if (virq) {
pr_debug("existing mapping on virq %d\n", virq);
- return virq;
+ goto out;
}
- return __irq_create_mapping_affinity(domain, hwirq, affinity);
+ virq = irq_create_mapping_affinity_locked(domain, hwirq, affinity);
+out:
+ mutex_unlock(&irq_domain_mutex);
+
+ return virq;
}
EXPORT_SYMBOL_GPL(irq_create_mapping_affinity);
@@ -809,6 +818,8 @@ unsigned int irq_create_fwspec_mapping(s
if (WARN_ON(type & ~IRQ_TYPE_SENSE_MASK))
type &= IRQ_TYPE_SENSE_MASK;
+ mutex_lock(&irq_domain_mutex);
+
/*
* If we've already configured this interrupt,
* don't do it again, or hell will break loose.
@@ -821,7 +832,7 @@ unsigned int irq_create_fwspec_mapping(s
* interrupt number.
*/
if (type == IRQ_TYPE_NONE || type == irq_get_trigger_type(virq))
- return virq;
+ goto out;
/*
* If the trigger type has not been set yet, then set
@@ -829,35 +840,45 @@ unsigned int irq_create_fwspec_mapping(s
*/
if (irq_get_trigger_type(virq) == IRQ_TYPE_NONE) {
irq_data = irq_get_irq_data(virq);
- if (!irq_data)
- return 0;
+ if (!irq_data) {
+ virq = 0;
+ goto out;
+ }
irqd_set_trigger_type(irq_data, type);
- return virq;
+ goto out;
}
pr_warn("type mismatch, failed to map hwirq-%lu for %s!\n",
hwirq, of_node_full_name(to_of_node(fwspec->fwnode)));
- return 0;
+ virq = 0;
+ goto out;
}
if (irq_domain_is_hierarchy(domain)) {
- virq = irq_domain_alloc_irqs(domain, 1, NUMA_NO_NODE, fwspec);
- if (virq <= 0)
- return 0;
+ virq = irq_domain_alloc_irqs_locked(domain, -1, 1, NUMA_NO_NODE,
+ fwspec, false, NULL);
+ if (virq <= 0) {
+ virq = 0;
+ goto out;
+ }
} else {
/* Create mapping */
- virq = __irq_create_mapping_affinity(domain, hwirq, NULL);
+ virq = irq_create_mapping_affinity_locked(domain, hwirq, NULL);
if (!virq)
- return virq;
+ goto out;
}
irq_data = irq_get_irq_data(virq);
- if (WARN_ON(!irq_data))
- return 0;
+ if (WARN_ON(!irq_data)) {
+ virq = 0;
+ goto out;
+ }
/* Store trigger type */
irqd_set_trigger_type(irq_data, type);
+out:
+ mutex_unlock(&irq_domain_mutex);
return virq;
}
@@ -1888,6 +1909,13 @@ void irq_domain_set_info(struct irq_doma
irq_set_handler_data(virq, handler_data);
}
+static int irq_domain_alloc_irqs_locked(struct irq_domain *domain, int irq_base,
+ unsigned int nr_irqs, int node, void *arg,
+ bool realloc, const struct irq_affinity_desc *affinity)
+{
+ return -EINVAL;
+}
+
static void irq_domain_check_hierarchy(struct irq_domain *domain)
{
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 780/885] irqdomain: Fix domain registration race
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (778 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 779/885] irqdomain: Fix mapping-creation race Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 781/885] crypto: qat - fix out-of-bounds read Greg Kroah-Hartman
` (107 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Marc Zyngier, Johan Hovold
From: Marc Zyngier <maz@kernel.org>
commit 8932c32c3053accd50702b36e944ac2016cd103c upstream.
Hierarchical domains created using irq_domain_create_hierarchy() are
currently added to the domain list before having been fully initialised.
This specifically means that a racing allocation request might fail to
allocate irq data for the inner domains of a hierarchy in case the
parent domain pointer has not yet been set up.
Note that this is not really any issue for irqchip drivers that are
registered early (e.g. via IRQCHIP_DECLARE() or IRQCHIP_ACPI_DECLARE())
but could potentially cause trouble with drivers that are registered
later (e.g. modular drivers using IRQCHIP_PLATFORM_DRIVER_BEGIN(),
gpiochip drivers, etc.).
Fixes: afb7da83b9f4 ("irqdomain: Introduce helper function irq_domain_add_hierarchy()")
Cc: stable@vger.kernel.org # 3.19
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ johan: add commit message ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-8-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/irq/irqdomain.c | 62 +++++++++++++++++++++++++++++++++----------------
1 file changed, 43 insertions(+), 19 deletions(-)
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -126,23 +126,12 @@ void irq_domain_free_fwnode(struct fwnod
}
EXPORT_SYMBOL_GPL(irq_domain_free_fwnode);
-/**
- * __irq_domain_add() - Allocate a new irq_domain data structure
- * @fwnode: firmware node for the interrupt controller
- * @size: Size of linear map; 0 for radix mapping only
- * @hwirq_max: Maximum number of interrupts supported by controller
- * @direct_max: Maximum value of direct maps; Use ~0 for no limit; 0 for no
- * direct mapping
- * @ops: domain callbacks
- * @host_data: Controller private data pointer
- *
- * Allocates and initializes an irq_domain structure.
- * Returns pointer to IRQ domain, or NULL on failure.
- */
-struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, unsigned int size,
- irq_hw_number_t hwirq_max, int direct_max,
- const struct irq_domain_ops *ops,
- void *host_data)
+static struct irq_domain *__irq_domain_create(struct fwnode_handle *fwnode,
+ unsigned int size,
+ irq_hw_number_t hwirq_max,
+ int direct_max,
+ const struct irq_domain_ops *ops,
+ void *host_data)
{
struct irqchip_fwid *fwid;
struct irq_domain *domain;
@@ -230,12 +219,44 @@ struct irq_domain *__irq_domain_add(stru
irq_domain_check_hierarchy(domain);
+ return domain;
+}
+
+static void __irq_domain_publish(struct irq_domain *domain)
+{
mutex_lock(&irq_domain_mutex);
debugfs_add_domain_dir(domain);
list_add(&domain->link, &irq_domain_list);
mutex_unlock(&irq_domain_mutex);
pr_debug("Added domain %s\n", domain->name);
+}
+
+/**
+ * __irq_domain_add() - Allocate a new irq_domain data structure
+ * @fwnode: firmware node for the interrupt controller
+ * @size: Size of linear map; 0 for radix mapping only
+ * @hwirq_max: Maximum number of interrupts supported by controller
+ * @direct_max: Maximum value of direct maps; Use ~0 for no limit; 0 for no
+ * direct mapping
+ * @ops: domain callbacks
+ * @host_data: Controller private data pointer
+ *
+ * Allocates and initializes an irq_domain structure.
+ * Returns pointer to IRQ domain, or NULL on failure.
+ */
+struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, unsigned int size,
+ irq_hw_number_t hwirq_max, int direct_max,
+ const struct irq_domain_ops *ops,
+ void *host_data)
+{
+ struct irq_domain *domain;
+
+ domain = __irq_domain_create(fwnode, size, hwirq_max, direct_max,
+ ops, host_data);
+ if (domain)
+ __irq_domain_publish(domain);
+
return domain;
}
EXPORT_SYMBOL_GPL(__irq_domain_add);
@@ -1138,12 +1159,15 @@ struct irq_domain *irq_domain_create_hie
struct irq_domain *domain;
if (size)
- domain = irq_domain_create_linear(fwnode, size, ops, host_data);
+ domain = __irq_domain_create(fwnode, size, size, 0, ops, host_data);
else
- domain = irq_domain_create_tree(fwnode, ops, host_data);
+ domain = __irq_domain_create(fwnode, 0, ~0, 0, ops, host_data);
+
if (domain) {
domain->parent = parent;
domain->flags |= flags;
+
+ __irq_domain_publish(domain);
}
return domain;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 781/885] crypto: qat - fix out-of-bounds read
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (779 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 780/885] irqdomain: Fix domain registration race Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 782/885] mm/damon/paddr: fix missing folio_put() Greg Kroah-Hartman
` (106 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vladis Dronov, Giovanni Cabiddu,
Fiona Trahe, Herbert Xu
From: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
commit f6044cc3030e139f60c281386f28bda6e3049d66 upstream.
When preparing an AER-CTR request, the driver copies the key provided by
the user into a data structure that is accessible by the firmware.
If the target device is QAT GEN4, the key size is rounded up by 16 since
a rounded up size is expected by the device.
If the key size is rounded up before the copy, the size used for copying
the key might be bigger than the size of the region containing the key,
causing an out-of-bounds read.
Fix by doing the copy first and then update the keylen.
This is to fix the following warning reported by KASAN:
[ 138.150574] BUG: KASAN: global-out-of-bounds in qat_alg_skcipher_init_com.isra.0+0x197/0x250 [intel_qat]
[ 138.150641] Read of size 32 at addr ffffffff88c402c0 by task cryptomgr_test/2340
[ 138.150651] CPU: 15 PID: 2340 Comm: cryptomgr_test Not tainted 6.2.0-rc1+ #45
[ 138.150659] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.86B.0087.D13.2208261706 08/26/2022
[ 138.150663] Call Trace:
[ 138.150668] <TASK>
[ 138.150922] kasan_check_range+0x13a/0x1c0
[ 138.150931] memcpy+0x1f/0x60
[ 138.150940] qat_alg_skcipher_init_com.isra.0+0x197/0x250 [intel_qat]
[ 138.151006] qat_alg_skcipher_init_sessions+0xc1/0x240 [intel_qat]
[ 138.151073] crypto_skcipher_setkey+0x82/0x160
[ 138.151085] ? prepare_keybuf+0xa2/0xd0
[ 138.151095] test_skcipher_vec_cfg+0x2b8/0x800
Fixes: 67916c951689 ("crypto: qat - add AES-CTR support for QAT GEN4 devices")
Cc: <stable@vger.kernel.org>
Reported-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Tested-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/crypto/qat/qat_common/qat_algs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/crypto/qat/qat_common/qat_algs.c
+++ b/drivers/crypto/qat/qat_common/qat_algs.c
@@ -434,8 +434,8 @@ static void qat_alg_skcipher_init_com(st
} else if (aes_v2_capable && mode == ICP_QAT_HW_CIPHER_CTR_MODE) {
ICP_QAT_FW_LA_SLICE_TYPE_SET(header->serv_specif_flags,
ICP_QAT_FW_LA_USE_UCS_SLICE_TYPE);
- keylen = round_up(keylen, 16);
memcpy(cd->ucs_aes.key, key, keylen);
+ keylen = round_up(keylen, 16);
} else {
memcpy(cd->aes.key, key, keylen);
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 782/885] mm/damon/paddr: fix missing folio_put()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (780 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 781/885] crypto: qat - fix out-of-bounds read Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 783/885] ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls() Greg Kroah-Hartman
` (105 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, andrew.yang, SeongJae Park, Andrew Morton
From: andrew.yang <andrew.yang@mediatek.com>
commit 3f98c9a62c338bbe06a215c9491e6166ea39bf82 upstream.
damon_get_folio() would always increase folio _refcount and
folio_isolate_lru() would increase folio _refcount if the folio's lru flag
is set.
If an unevictable folio isolated successfully, there will be two more
_refcount. The one from folio_isolate_lru() will be decreased in
folio_puback_lru(), but the other one from damon_get_folio() will be left
behind. This causes a pin page.
Whatever the case, the _refcount from damon_get_folio() should be
decreased.
Link: https://lkml.kernel.org/r/20230222064223.6735-1-andrew.yang@mediatek.com
Fixes: 57223ac29584 ("mm/damon/paddr: support the pageout scheme")
Signed-off-by: andrew.yang <andrew.yang@mediatek.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.16.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/damon/paddr.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/mm/damon/paddr.c
+++ b/mm/damon/paddr.c
@@ -219,12 +219,11 @@ static unsigned long damon_pa_pageout(st
put_page(page);
continue;
}
- if (PageUnevictable(page)) {
+ if (PageUnevictable(page))
putback_lru_page(page);
- } else {
+ else
list_add(&page->lru, &page_list);
- put_page(page);
- }
+ put_page(page);
}
applied = reclaim_pages(&page_list);
cond_resched();
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 783/885] ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (781 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 782/885] mm/damon/paddr: fix missing folio_put() Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 784/885] ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC Greg Kroah-Hartman
` (104 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Dmitry Fomin, Takashi Iwai
From: Dmitry Fomin <fomindmitriyfoma@mail.ru>
commit 951606a14a8901e3551fe4d8d3cedd73fe954ce1 upstream.
If snd_ctl_add() fails in aureon_add_controls(), it immediately returns
and leaves ice->gpio_mutex locked. ice->gpio_mutex locks in
snd_ice1712_save_gpio_status and unlocks in
snd_ice1712_restore_gpio_status(ice).
It seems that the mutex is required only for aureon_cs8415_get(),
so snd_ice1712_restore_gpio_status(ice) can be placed
just after that. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Fomin <fomindmitriyfoma@mail.ru>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230225184322.6286-1-fomindmitriyfoma@mail.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/ice1712/aureon.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/pci/ice1712/aureon.c
+++ b/sound/pci/ice1712/aureon.c
@@ -1892,6 +1892,7 @@ static int aureon_add_controls(struct sn
unsigned char id;
snd_ice1712_save_gpio_status(ice);
id = aureon_cs8415_get(ice, CS8415_ID);
+ snd_ice1712_restore_gpio_status(ice);
if (id != 0x41)
dev_info(ice->card->dev,
"No CS8415 chip. Skipping CS8415 controls.\n");
@@ -1909,7 +1910,6 @@ static int aureon_add_controls(struct sn
kctl->id.device = ice->pcm->device;
}
}
- snd_ice1712_restore_gpio_status(ice);
}
return 0;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 784/885] ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (782 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 783/885] ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls() Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 785/885] jbd2: fix data missing when reusing bh which is ready to be checkpointed Greg Kroah-Hartman
` (103 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Łukasz Stelmach, Takashi Iwai
From: Łukasz Stelmach <l.stelmach@samsung.com>
commit ea24b9953bcd3889f77a66e7f1d7e86e995dd9c3 upstream.
HP EliteDesk 800 G6 Tower PC (103c:870c) requires a quirk for enabling
headset-mic.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217008
Link: https://lore.kernel.org/r/20230223074749.1026060-1-l.stelmach@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -11617,6 +11617,7 @@ static const struct snd_pci_quirk alc662
SND_PCI_QUIRK(0x1028, 0x0698, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
+ SND_PCI_QUIRK(0x103c, 0x870c, "HP", ALC897_FIXUP_HP_HSMIC_VERB),
SND_PCI_QUIRK(0x103c, 0x8719, "HP", ALC897_FIXUP_HP_HSMIC_VERB),
SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2),
SND_PCI_QUIRK(0x103c, 0x877e, "HP 288 Pro G6", ALC671_FIXUP_HP_HEADSET_MIC2),
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 785/885] jbd2: fix data missing when reusing bh which is ready to be checkpointed
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (783 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 784/885] ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC Greg Kroah-Hartman
@ 2023-03-07 17:01 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 786/885] ext4: optimize ea_inode block expansion Greg Kroah-Hartman
` (102 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:01 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, stable, Zhihao Cheng, zhanchengbin,
Jan Kara, Theodore Tso
From: Zhihao Cheng <chengzhihao1@huawei.com>
commit e6b9bd7290d334451ce054e98e752abc055e0034 upstream.
Following process will make data lost and could lead to a filesystem
corrupted problem:
1. jh(bh) is inserted into T1->t_checkpoint_list, bh is dirty, and
jh->b_transaction = NULL
2. T1 is added into journal->j_checkpoint_transactions.
3. Get bh prepare to write while doing checkpoing:
PA PB
do_get_write_access jbd2_log_do_checkpoint
spin_lock(&jh->b_state_lock)
if (buffer_dirty(bh))
clear_buffer_dirty(bh) // clear buffer dirty
set_buffer_jbddirty(bh)
transaction =
journal->j_checkpoint_transactions
jh = transaction->t_checkpoint_list
if (!buffer_dirty(bh))
__jbd2_journal_remove_checkpoint(jh)
// bh won't be flushed
jbd2_cleanup_journal_tail
__jbd2_journal_file_buffer(jh, transaction, BJ_Reserved)
4. Aborting journal/Power-cut before writing latest bh on journal area.
In this way we get a corrupted filesystem with bh's data lost.
Fix it by moving the clearing of buffer_dirty bit just before the call
to __jbd2_journal_file_buffer(), both bit clearing and jh->b_transaction
assignment are under journal->j_list_lock locked, so that
jbd2_log_do_checkpoint() will wait until jh's new transaction fininshed
even bh is currently not dirty. And journal_shrink_one_cp_list() won't
remove jh from checkpoint list if the buffer head is reused in
do_get_write_access().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216898
Cc: <stable@kernel.org>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: zhanchengbin <zhanchengbin1@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230110015327.1181863-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/jbd2/transaction.c | 50 +++++++++++++++++++++++++++++---------------------
1 file changed, 29 insertions(+), 21 deletions(-)
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1010,36 +1010,28 @@ repeat:
* ie. locked but not dirty) or tune2fs (which may actually have
* the buffer dirtied, ugh.) */
- if (buffer_dirty(bh)) {
+ if (buffer_dirty(bh) && jh->b_transaction) {
+ warn_dirty_buffer(bh);
/*
- * First question: is this buffer already part of the current
- * transaction or the existing committing transaction?
- */
- if (jh->b_transaction) {
- J_ASSERT_JH(jh,
- jh->b_transaction == transaction ||
- jh->b_transaction ==
- journal->j_committing_transaction);
- if (jh->b_next_transaction)
- J_ASSERT_JH(jh, jh->b_next_transaction ==
- transaction);
- warn_dirty_buffer(bh);
- }
- /*
- * In any case we need to clean the dirty flag and we must
- * do it under the buffer lock to be sure we don't race
- * with running write-out.
+ * We need to clean the dirty flag and we must do it under the
+ * buffer lock to be sure we don't race with running write-out.
*/
JBUFFER_TRACE(jh, "Journalling dirty buffer");
clear_buffer_dirty(bh);
+ /*
+ * The buffer is going to be added to BJ_Reserved list now and
+ * nothing guarantees jbd2_journal_dirty_metadata() will be
+ * ever called for it. So we need to set jbddirty bit here to
+ * make sure the buffer is dirtied and written out when the
+ * journaling machinery is done with it.
+ */
set_buffer_jbddirty(bh);
}
- unlock_buffer(bh);
-
error = -EROFS;
if (is_handle_aborted(handle)) {
spin_unlock(&jh->b_state_lock);
+ unlock_buffer(bh);
goto out;
}
error = 0;
@@ -1049,8 +1041,10 @@ repeat:
* b_next_transaction points to it
*/
if (jh->b_transaction == transaction ||
- jh->b_next_transaction == transaction)
+ jh->b_next_transaction == transaction) {
+ unlock_buffer(bh);
goto done;
+ }
/*
* this is the first time this transaction is touching this buffer,
@@ -1074,10 +1068,24 @@ repeat:
*/
smp_wmb();
spin_lock(&journal->j_list_lock);
+ if (test_clear_buffer_dirty(bh)) {
+ /*
+ * Execute buffer dirty clearing and jh->b_transaction
+ * assignment under journal->j_list_lock locked to
+ * prevent bh being removed from checkpoint list if
+ * the buffer is in an intermediate state (not dirty
+ * and jh->b_transaction is NULL).
+ */
+ JBUFFER_TRACE(jh, "Journalling dirty buffer");
+ set_buffer_jbddirty(bh);
+ }
__jbd2_journal_file_buffer(jh, transaction, BJ_Reserved);
spin_unlock(&journal->j_list_lock);
+ unlock_buffer(bh);
goto done;
}
+ unlock_buffer(bh);
+
/*
* If there is already a copy-out version of this buffer, then we don't
* need to make another one
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 786/885] ext4: optimize ea_inode block expansion
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (784 preceding siblings ...)
2023-03-07 17:01 ` [PATCH 6.1 785/885] jbd2: fix data missing when reusing bh which is ready to be checkpointed Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 787/885] ext4: refuse to create ea block when umounted Greg Kroah-Hartman
` (101 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+2dacb8f015bf1420155f, stable,
Jun Nie, Theodore Tso
From: Jun Nie <jun.nie@linaro.org>
commit 1e9d62d252812575ded7c620d8fc67c32ff06c16 upstream.
Copy ea data from inode entry when expanding ea block if possible.
Then remove the ea entry if expansion success. Thus memcpy to a
temporary buffer may be avoided.
If the expansion fails, we do not need to recovery the removed ea
entry neither in this way.
Reported-by: syzbot+2dacb8f015bf1420155f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=3613786cb88c93aa1c6a279b1df6a7b201347d08
Link: https://lore.kernel.org/r/20230103014517.495275-2-jun.nie@linaro.org
Cc: stable@kernel.org
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/xattr.c | 28 +++++++++++++++++-----------
1 file changed, 17 insertions(+), 11 deletions(-)
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -2550,9 +2550,8 @@ static int ext4_xattr_move_to_block(hand
is = kzalloc(sizeof(struct ext4_xattr_ibody_find), GFP_NOFS);
bs = kzalloc(sizeof(struct ext4_xattr_block_find), GFP_NOFS);
- buffer = kvmalloc(value_size, GFP_NOFS);
b_entry_name = kmalloc(entry->e_name_len + 1, GFP_NOFS);
- if (!is || !bs || !buffer || !b_entry_name) {
+ if (!is || !bs || !b_entry_name) {
error = -ENOMEM;
goto out;
}
@@ -2564,12 +2563,18 @@ static int ext4_xattr_move_to_block(hand
/* Save the entry name and the entry value */
if (entry->e_value_inum) {
+ buffer = kvmalloc(value_size, GFP_NOFS);
+ if (!buffer) {
+ error = -ENOMEM;
+ goto out;
+ }
+
error = ext4_xattr_inode_get(inode, entry, buffer, value_size);
if (error)
goto out;
} else {
size_t value_offs = le16_to_cpu(entry->e_value_offs);
- memcpy(buffer, (void *)IFIRST(header) + value_offs, value_size);
+ buffer = (void *)IFIRST(header) + value_offs;
}
memcpy(b_entry_name, entry->e_name, entry->e_name_len);
@@ -2584,25 +2589,26 @@ static int ext4_xattr_move_to_block(hand
if (error)
goto out;
- /* Remove the chosen entry from the inode */
- error = ext4_xattr_ibody_set(handle, inode, &i, is);
- if (error)
- goto out;
-
i.value = buffer;
i.value_len = value_size;
error = ext4_xattr_block_find(inode, &i, bs);
if (error)
goto out;
- /* Add entry which was removed from the inode into the block */
+ /* Move ea entry from the inode into the block */
error = ext4_xattr_block_set(handle, inode, &i, bs);
if (error)
goto out;
- error = 0;
+
+ /* Remove the chosen entry from the inode */
+ i.value = NULL;
+ i.value_len = 0;
+ error = ext4_xattr_ibody_set(handle, inode, &i, is);
+
out:
kfree(b_entry_name);
- kvfree(buffer);
+ if (entry->e_value_inum && buffer)
+ kvfree(buffer);
if (is)
brelse(is->iloc.bh);
if (bs)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 787/885] ext4: refuse to create ea block when umounted
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (785 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 786/885] ext4: optimize ea_inode block expansion Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 788/885] ext4: Fix possible corruption when moving a directory Greg Kroah-Hartman
` (100 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+2dacb8f015bf1420155f, stable,
Jun Nie, Theodore Tso
From: Jun Nie <jun.nie@linaro.org>
commit f31173c19901a96bb2ebf6bcfec8a08df7095c91 upstream.
The ea block expansion need to access s_root while it is
already set as NULL when umount is triggered. Refuse this
request to avoid panic.
Reported-by: syzbot+2dacb8f015bf1420155f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=3613786cb88c93aa1c6a279b1df6a7b201347d08
Link: https://lore.kernel.org/r/20230103014517.495275-3-jun.nie@linaro.org
Cc: stable@kernel.org
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/xattr.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -1422,6 +1422,13 @@ static struct inode *ext4_xattr_inode_cr
uid_t owner[2] = { i_uid_read(inode), i_gid_read(inode) };
int err;
+ if (inode->i_sb->s_root == NULL) {
+ ext4_warning(inode->i_sb,
+ "refuse to create EA inode when umounting");
+ WARN_ON(1);
+ return ERR_PTR(-EINVAL);
+ }
+
/*
* Let the next inode be the goal, so we try and allocate the EA inode
* in the same group, or nearby one.
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 788/885] ext4: Fix possible corruption when moving a directory
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (786 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 787/885] ext4: refuse to create ea block when umounted Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 19:23 ` Eric Biggers
2023-03-07 17:02 ` [PATCH 6.1 789/885] cxl/pmem: Fix nvdimm registration races Greg Kroah-Hartman
` (99 subsequent siblings)
887 siblings, 1 reply; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jan Kara, Theodore Tso
From: Jan Kara <jack@suse.cz>
commit 0813299c586b175d7edb25f56412c54b812d0379 upstream.
When we are renaming a directory to a different directory, we need to
update '..' entry in the moved directory. However nothing prevents moved
directory from being modified and even converted from the inline format
to the normal format. When such race happens the rename code gets
confused and we crash. Fix the problem by locking the moved directory.
CC: stable@vger.kernel.org
Fixes: 32f7f22c0b52 ("ext4: let ext4_rename handle inline dir")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230126112221.11866-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/namei.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -3872,9 +3872,16 @@ static int ext4_rename(struct user_names
if (new.dir != old.dir && EXT4_DIR_LINK_MAX(new.dir))
goto end_rename;
}
+ /*
+ * We need to protect against old.inode directory getting
+ * converted from inline directory format into a normal one.
+ */
+ inode_lock_nested(old.inode, I_MUTEX_NONDIR2);
retval = ext4_rename_dir_prepare(handle, &old);
- if (retval)
+ if (retval) {
+ inode_unlock(old.inode);
goto end_rename;
+ }
}
/*
* If we're renaming a file within an inline_data dir and adding or
@@ -4006,6 +4013,8 @@ end_rename:
} else {
ext4_journal_stop(handle);
}
+ if (old.dir_bh)
+ inode_unlock(old.inode);
release_bh:
brelse(old.dir_bh);
brelse(old.bh);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 789/885] cxl/pmem: Fix nvdimm registration races
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (787 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 788/885] ext4: Fix possible corruption when moving a directory Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 790/885] mtd: spi-nor: sfdp: Fix index value for SCCR dwords Greg Kroah-Hartman
` (98 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Dave Jiang, Dan Williams
From: Dan Williams <dan.j.williams@intel.com>
commit f57aec443c24d2e8e1f3b5b4856aea12ddda4254 upstream.
A loop of the form:
while true; do modprobe cxl_pci; modprobe -r cxl_pci; done
...fails with the following crash signature:
BUG: kernel NULL pointer dereference, address: 0000000000000040
[..]
RIP: 0010:cxl_internal_send_cmd+0x5/0xb0 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_pmem_ctl+0x121/0x240 [cxl_pmem]
nvdimm_get_config_data+0xd6/0x1a0 [libnvdimm]
nd_label_data_init+0x135/0x7e0 [libnvdimm]
nvdimm_probe+0xd6/0x1c0 [libnvdimm]
nvdimm_bus_probe+0x7a/0x1e0 [libnvdimm]
really_probe+0xde/0x380
__driver_probe_device+0x78/0x170
driver_probe_device+0x1f/0x90
__device_attach_driver+0x85/0x110
bus_for_each_drv+0x7d/0xc0
__device_attach+0xb4/0x1e0
bus_probe_device+0x9f/0xc0
device_add+0x445/0x9c0
nd_async_device_register+0xe/0x40 [libnvdimm]
async_run_entry_fn+0x30/0x130
...namely that the bottom half of async nvdimm device registration runs
after the CXL has already torn down the context that cxl_pmem_ctl()
needs. Unlike the ACPI NFIT case that benefits from launching multiple
nvdimm device registrations in parallel from those listed in the table,
CXL is already marked PROBE_PREFER_ASYNCHRONOUS. So provide for a
synchronous registration path to preclude this scenario.
Fixes: 21083f51521f ("cxl/pmem: Register 'pmem' / cxl_nvdimm devices")
Cc: <stable@vger.kernel.org>
Reported-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/cxl/pmem.c | 1 +
drivers/nvdimm/bus.c | 19 ++++++++++++++++---
drivers/nvdimm/dimm_devs.c | 5 ++++-
drivers/nvdimm/nd-core.h | 1 +
include/linux/libnvdimm.h | 3 +++
5 files changed, 25 insertions(+), 4 deletions(-)
--- a/drivers/cxl/pmem.c
+++ b/drivers/cxl/pmem.c
@@ -75,6 +75,7 @@ static int cxl_nvdimm_probe(struct devic
goto out;
set_bit(NDD_LABELING, &flags);
+ set_bit(NDD_REGISTER_SYNC, &flags);
set_bit(ND_CMD_GET_CONFIG_SIZE, &cmd_mask);
set_bit(ND_CMD_GET_CONFIG_DATA, &cmd_mask);
set_bit(ND_CMD_SET_CONFIG_DATA, &cmd_mask);
--- a/drivers/nvdimm/bus.c
+++ b/drivers/nvdimm/bus.c
@@ -508,7 +508,7 @@ static void nd_async_device_unregister(v
put_device(dev);
}
-void nd_device_register(struct device *dev)
+static void __nd_device_register(struct device *dev, bool sync)
{
if (!dev)
return;
@@ -531,11 +531,24 @@ void nd_device_register(struct device *d
}
get_device(dev);
- async_schedule_dev_domain(nd_async_device_register, dev,
- &nd_async_domain);
+ if (sync)
+ nd_async_device_register(dev, 0);
+ else
+ async_schedule_dev_domain(nd_async_device_register, dev,
+ &nd_async_domain);
+}
+
+void nd_device_register(struct device *dev)
+{
+ __nd_device_register(dev, false);
}
EXPORT_SYMBOL(nd_device_register);
+void nd_device_register_sync(struct device *dev)
+{
+ __nd_device_register(dev, true);
+}
+
void nd_device_unregister(struct device *dev, enum nd_async_mode mode)
{
bool killed;
--- a/drivers/nvdimm/dimm_devs.c
+++ b/drivers/nvdimm/dimm_devs.c
@@ -617,7 +617,10 @@ struct nvdimm *__nvdimm_create(struct nv
nvdimm->sec.ext_flags = nvdimm_security_flags(nvdimm, NVDIMM_MASTER);
device_initialize(dev);
lockdep_set_class(&dev->mutex, &nvdimm_key);
- nd_device_register(dev);
+ if (test_bit(NDD_REGISTER_SYNC, &flags))
+ nd_device_register_sync(dev);
+ else
+ nd_device_register(dev);
return nvdimm;
}
--- a/drivers/nvdimm/nd-core.h
+++ b/drivers/nvdimm/nd-core.h
@@ -107,6 +107,7 @@ int nvdimm_bus_create_ndctl(struct nvdim
void nvdimm_bus_destroy_ndctl(struct nvdimm_bus *nvdimm_bus);
void nd_synchronize(void);
void nd_device_register(struct device *dev);
+void nd_device_register_sync(struct device *dev);
struct nd_label_id;
char *nd_label_gen_id(struct nd_label_id *label_id, const uuid_t *uuid,
u32 flags);
--- a/include/linux/libnvdimm.h
+++ b/include/linux/libnvdimm.h
@@ -36,6 +36,9 @@ enum {
/* dimm supports namespace labels */
NDD_LABELING = 6,
+ /* dimm provider wants synchronous registration by __nvdimm_create() */
+ NDD_REGISTER_SYNC = 8,
+
/* need to set a limit somewhere, but yes, this is likely overkill */
ND_IOCTL_MAX_BUFLEN = SZ_4M,
ND_CMD_MAX_ELEM = 5,
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 790/885] mtd: spi-nor: sfdp: Fix index value for SCCR dwords
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (788 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 789/885] cxl/pmem: Fix nvdimm registration races Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 791/885] mtd: spi-nor: spansion: Consider reserved bits in CFR5 register Greg Kroah-Hartman
` (97 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Takahiro Kuwano, Tudor Ambarus,
Michael Walle
From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
commit ad9679f3811899fd1c21dc7bdd715e8e1cfb46b9 upstream.
Array index for SCCR 22th DOWRD should be 21.
Fixes: 981a8d60e01f ("mtd: spi-nor: Parse SFDP SCCR Map")
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d8a2a77c2c95cf776e7dcae6392d29fdcf5d6307.1672026365.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/spi-nor/sfdp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -1222,7 +1222,7 @@ static int spi_nor_parse_sccr(struct spi
le32_to_cpu_array(dwords, sccr_header->length);
- if (FIELD_GET(SCCR_DWORD22_OCTAL_DTR_EN_VOLATILE, dwords[22]))
+ if (FIELD_GET(SCCR_DWORD22_OCTAL_DTR_EN_VOLATILE, dwords[21]))
nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
out:
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 791/885] mtd: spi-nor: spansion: Consider reserved bits in CFR5 register
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (789 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 790/885] mtd: spi-nor: sfdp: Fix index value for SCCR dwords Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 792/885] mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type Greg Kroah-Hartman
` (96 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Takahiro Kuwano, Tudor Ambarus,
Dhruva Gole, Pratyush Yadav
From: Tudor Ambarus <tudor.ambarus@linaro.org>
commit 3f592a869f87723314f0cb1ac232bd3bf8245be8 upstream.
CFR5[6] is reserved bit and must be always 1. Set it to comply with flash
requirements. While fixing SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_{EN, DS}
definition, stop using magic numbers and describe the missing bit fields
in CFR5 register. This is useful for both readability and future possible
addition of Octal STR mode support.
Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Cc: stable@vger.kernel.org
Reported-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/linux-mtd/20230110164703.83413-1-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/spi-nor/spansion.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -21,8 +21,13 @@
#define SPINOR_REG_CYPRESS_CFR3V 0x00800004
#define SPINOR_REG_CYPRESS_CFR3V_PGSZ BIT(4) /* Page size. */
#define SPINOR_REG_CYPRESS_CFR5V 0x00800006
-#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN 0x3
-#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS 0
+#define SPINOR_REG_CYPRESS_CFR5_BIT6 BIT(6)
+#define SPINOR_REG_CYPRESS_CFR5_DDR BIT(1)
+#define SPINOR_REG_CYPRESS_CFR5_OPI BIT(0)
+#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN \
+ (SPINOR_REG_CYPRESS_CFR5_BIT6 | SPINOR_REG_CYPRESS_CFR5_DDR | \
+ SPINOR_REG_CYPRESS_CFR5_OPI)
+#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS SPINOR_REG_CYPRESS_CFR5_BIT6
#define SPINOR_OP_CYPRESS_RD_FAST 0xee
/* Cypress SPI NOR flash operations. */
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 792/885] mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (790 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 791/885] mtd: spi-nor: spansion: Consider reserved bits in CFR5 register Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 793/885] dm: send just one event on resize, not two Greg Kroah-Hartman
` (95 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexander Stein, Louis Rannou,
Tudor Ambarus
From: Louis Rannou <lrannou@baylibre.com>
commit f0f0cfdc3a024e21161714f2e05f0df3b84d42ad upstream.
spi_nor_set_erase_type() was used either to set or to mask out an erase
type. When we used it to mask out an erase type a shift-out-of-bounds
was hit:
UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
shift exponent 4294967295 is too large for 32-bit type 'int'
The setting of the size_{shift, mask} and of the opcode are unnecessary
when the erase size is zero, as throughout the code just the erase size
is considered to determine whether an erase type is supported or not.
Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF
is an unused opcode. Thus when masking out an erase type, just set the
erase size to zero. This will fix the shift-out-of-bounds.
Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Cc: stable@vger.kernel.org
Reported-by: Alexander Stein <Alexander.Stein@tq-group.com>
Signed-off-by: Louis Rannou <lrannou@baylibre.com>
Tested-by: Alexander Stein <Alexander.Stein@tq-group.com>
Link: https://lore.kernel.org/r/20230203070754.50677-1-tudor.ambarus@linaro.org
[ta: refine changes, new commit message, fix compilation error]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/spi-nor/core.c | 9 +++++++++
drivers/mtd/spi-nor/core.h | 1 +
drivers/mtd/spi-nor/sfdp.c | 4 ++--
3 files changed, 12 insertions(+), 2 deletions(-)
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2004,6 +2004,15 @@ void spi_nor_set_erase_type(struct spi_n
}
/**
+ * spi_nor_mask_erase_type() - mask out a SPI NOR erase type
+ * @erase: pointer to a structure that describes a SPI NOR erase type
+ */
+void spi_nor_mask_erase_type(struct spi_nor_erase_type *erase)
+{
+ erase->size = 0;
+}
+
+/**
* spi_nor_init_uniform_erase_map() - Initialize uniform erase map
* @map: the erase map of the SPI NOR
* @erase_mask: bitmask encoding erase types that can erase the entire
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -682,6 +682,7 @@ void spi_nor_set_pp_settings(struct spi_
void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
u8 opcode);
+void spi_nor_mask_erase_type(struct spi_nor_erase_type *erase);
struct spi_nor_erase_region *
spi_nor_region_next(struct spi_nor_erase_region *region);
void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -876,7 +876,7 @@ static int spi_nor_init_non_uniform_eras
*/
for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
if (!(regions_erase_type & BIT(erase[i].idx)))
- spi_nor_set_erase_type(&erase[i], 0, 0xFF);
+ spi_nor_mask_erase_type(&erase[i]);
return 0;
}
@@ -1090,7 +1090,7 @@ static int spi_nor_parse_4bait(struct sp
erase_type[i].opcode = (dwords[1] >>
erase_type[i].idx * 8) & 0xFF;
else
- spi_nor_set_erase_type(&erase_type[i], 0u, 0xFF);
+ spi_nor_mask_erase_type(&erase_type[i]);
}
/*
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 793/885] dm: send just one event on resize, not two
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (791 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 792/885] mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 794/885] dm: add cond_resched() to dm_wq_work() Greg Kroah-Hartman
` (94 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mikulas Patocka, Peter Rajnoha,
Mike Snitzer
From: Mikulas Patocka <mpatocka@redhat.com>
commit 7533afa1d27ba1234146d31d2402c195cf195962 upstream.
Device mapper sends an uevent when the device is suspended, using the
function set_capacity_and_notify. However, this causes a race condition
with udev.
Udev skips scanning dm devices that are suspended. If we send an uevent
while we are suspended, udev will be racing with device mapper resume
code. If the device mapper resume code wins the race, udev will process
the uevent after the device is resumed and it will properly scan the
device.
However, if udev wins the race, it will receive the uevent, find out that
the dm device is suspended and skip scanning the device. This causes bugs
such as systemd unmounting the device - see
https://bugzilla.redhat.com/show_bug.cgi?id=2158628
This commit fixes this race.
We replace the function set_capacity_and_notify with set_capacity, so that
the uevent is not sent at this point. In do_resume, we detect if the
capacity has changed and we pass a boolean variable need_resize_uevent to
dm_kobject_uevent. dm_kobject_uevent adds "RESIZE=1" to the uevent if
need_resize_uevent is set.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Peter Rajnoha <prajnoha@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-ioctl.c | 13 ++++++++++---
drivers/md/dm.c | 27 +++++++++++++--------------
drivers/md/dm.h | 2 +-
3 files changed, 24 insertions(+), 18 deletions(-)
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -482,7 +482,7 @@ static struct mapped_device *dm_hash_ren
dm_table_event(table);
dm_put_live_table(hc->md, srcu_idx);
- if (!dm_kobject_uevent(hc->md, KOBJ_CHANGE, param->event_nr))
+ if (!dm_kobject_uevent(hc->md, KOBJ_CHANGE, param->event_nr, false))
param->flags |= DM_UEVENT_GENERATED_FLAG;
md = hc->md;
@@ -995,7 +995,7 @@ static int dev_remove(struct file *filp,
dm_ima_measure_on_device_remove(md, false);
- if (!dm_kobject_uevent(md, KOBJ_REMOVE, param->event_nr))
+ if (!dm_kobject_uevent(md, KOBJ_REMOVE, param->event_nr, false))
param->flags |= DM_UEVENT_GENERATED_FLAG;
dm_put(md);
@@ -1129,6 +1129,7 @@ static int do_resume(struct dm_ioctl *pa
struct hash_cell *hc;
struct mapped_device *md;
struct dm_table *new_map, *old_map = NULL;
+ bool need_resize_uevent = false;
down_write(&_hash_lock);
@@ -1149,6 +1150,8 @@ static int do_resume(struct dm_ioctl *pa
/* Do we need to load a new map ? */
if (new_map) {
+ sector_t old_size, new_size;
+
/* Suspend if it isn't already suspended */
if (param->flags & DM_SKIP_LOCKFS_FLAG)
suspend_flags &= ~DM_SUSPEND_LOCKFS_FLAG;
@@ -1157,6 +1160,7 @@ static int do_resume(struct dm_ioctl *pa
if (!dm_suspended_md(md))
dm_suspend(md, suspend_flags);
+ old_size = dm_get_size(md);
old_map = dm_swap_table(md, new_map);
if (IS_ERR(old_map)) {
dm_sync_table(md);
@@ -1164,6 +1168,9 @@ static int do_resume(struct dm_ioctl *pa
dm_put(md);
return PTR_ERR(old_map);
}
+ new_size = dm_get_size(md);
+ if (old_size && new_size && old_size != new_size)
+ need_resize_uevent = true;
if (dm_table_get_mode(new_map) & FMODE_WRITE)
set_disk_ro(dm_disk(md), 0);
@@ -1176,7 +1183,7 @@ static int do_resume(struct dm_ioctl *pa
if (!r) {
dm_ima_measure_on_device_resume(md, new_map ? true : false);
- if (!dm_kobject_uevent(md, KOBJ_CHANGE, param->event_nr))
+ if (!dm_kobject_uevent(md, KOBJ_CHANGE, param->event_nr, need_resize_uevent))
param->flags |= DM_UEVENT_GENERATED_FLAG;
}
}
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2184,10 +2184,7 @@ static struct dm_table *__bind(struct ma
if (size != dm_get_size(md))
memset(&md->geometry, 0, sizeof(md->geometry));
- if (!get_capacity(md->disk))
- set_capacity(md->disk, size);
- else
- set_capacity_and_notify(md->disk, size);
+ set_capacity(md->disk, size);
dm_table_event_callback(t, event_callback, md);
@@ -2980,23 +2977,25 @@ EXPORT_SYMBOL_GPL(dm_internal_resume_fas
* Event notification.
*---------------------------------------------------------------*/
int dm_kobject_uevent(struct mapped_device *md, enum kobject_action action,
- unsigned cookie)
+ unsigned cookie, bool need_resize_uevent)
{
int r;
unsigned noio_flag;
char udev_cookie[DM_COOKIE_LENGTH];
- char *envp[] = { udev_cookie, NULL };
-
- noio_flag = memalloc_noio_save();
-
- if (!cookie)
- r = kobject_uevent(&disk_to_dev(md->disk)->kobj, action);
- else {
+ char *envp[3] = { NULL, NULL, NULL };
+ char **envpp = envp;
+ if (cookie) {
snprintf(udev_cookie, DM_COOKIE_LENGTH, "%s=%u",
DM_COOKIE_ENV_VAR_NAME, cookie);
- r = kobject_uevent_env(&disk_to_dev(md->disk)->kobj,
- action, envp);
+ *envpp++ = udev_cookie;
}
+ if (need_resize_uevent) {
+ *envpp++ = "RESIZE=1";
+ }
+
+ noio_flag = memalloc_noio_save();
+
+ r = kobject_uevent_env(&disk_to_dev(md->disk)->kobj, action, envp);
memalloc_noio_restore(noio_flag);
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -203,7 +203,7 @@ int dm_get_table_device(struct mapped_de
void dm_put_table_device(struct mapped_device *md, struct dm_dev *d);
int dm_kobject_uevent(struct mapped_device *md, enum kobject_action action,
- unsigned cookie);
+ unsigned cookie, bool need_resize_uevent);
void dm_internal_suspend(struct mapped_device *md);
void dm_internal_resume(struct mapped_device *md);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 794/885] dm: add cond_resched() to dm_wq_work()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (792 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 793/885] dm: send just one event on resize, not two Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 795/885] dm: add cond_resched() to dm_wq_requeue_work() Greg Kroah-Hartman
` (93 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Pingfan Liu, Ming Lei, Mike Snitzer
From: Pingfan Liu <piliu@redhat.com>
commit 0ca44fcef241768fd25ee763b3d203b9852f269b upstream.
Otherwise the while() loop in dm_wq_work() can result in a "dead
loop" on systems that have preemption disabled. This is particularly
problematic on single cpu systems.
Cc: stable@vger.kernel.org
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2578,6 +2578,7 @@ static void dm_wq_work(struct work_struc
break;
submit_bio_noacct(bio);
+ cond_resched();
}
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 795/885] dm: add cond_resched() to dm_wq_requeue_work()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (793 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 794/885] dm: add cond_resched() to dm_wq_work() Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 796/885] wifi: rtw88: use RTW_FLAG_POWERON flag to prevent to power on/off twice Greg Kroah-Hartman
` (92 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Mike Snitzer
From: Mike Snitzer <snitzer@kernel.org>
commit f77692d65d54665d81815349cc727baa85e8b71d upstream.
Otherwise the while() loop in dm_wq_requeue_work() can result in a
"dead loop" on systems that have preemption disabled. This is
particularly problematic on single cpu systems.
Fixes: 8b211aaccb915 ("dm: add two stage requeue mechanism")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1020,6 +1020,7 @@ static void dm_wq_requeue_work(struct wo
io->next = NULL;
__dm_io_complete(io, false);
io = next;
+ cond_resched();
}
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 796/885] wifi: rtw88: use RTW_FLAG_POWERON flag to prevent to power on/off twice
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (794 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 795/885] dm: add cond_resched() to dm_wq_requeue_work() Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 797/885] wifi: rtl8xxxu: Use a longer retry limit of 48 Greg Kroah-Hartman
` (91 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paul Gover, Stable, Ping-Ke Shih,
Kalle Valo
From: Ping-Ke Shih <pkshih@realtek.com>
commit 4a267bc5ea8f159b614d0549030216d0434eccca upstream.
Use power state to decide whether we can enter or leave IPS accurately,
and then prevent to power on/off twice.
The commit 6bf3a083407b ("wifi: rtw88: add flag check before enter or leave IPS")
would like to prevent this as well, but it still can't entirely handle all
cases. The exception is that WiFi gets connected and does suspend/resume,
it will power on twice and cause it failed to power on after resuming,
like:
rtw_8723de 0000:03:00.0: failed to poll offset=0x6 mask=0x2 value=0x2
rtw_8723de 0000:03:00.0: mac power on failed
rtw_8723de 0000:03:00.0: failed to power on mac
rtw_8723de 0000:03:00.0: leave idle state failed
rtw_8723de 0000:03:00.0: failed to leave ips state
rtw_8723de 0000:03:00.0: failed to leave idle state
rtw_8723de 0000:03:00.0: failed to send h2c command
To fix this, introduce new flag RTW_FLAG_POWERON to reflect power state,
and call rtw_mac_pre_system_cfg() to configure registers properly between
power-off/-on.
Reported-by: Paul Gover <pmw.gover@yahoo.co.uk>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217016
Fixes: 6bf3a083407b ("wifi: rtw88: add flag check before enter or leave IPS")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230216053633.20366-1-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/realtek/rtw88/coex.c | 2 +-
drivers/net/wireless/realtek/rtw88/mac.c | 10 ++++++++++
drivers/net/wireless/realtek/rtw88/main.h | 2 +-
drivers/net/wireless/realtek/rtw88/ps.c | 4 ++--
drivers/net/wireless/realtek/rtw88/wow.c | 2 +-
5 files changed, 15 insertions(+), 5 deletions(-)
--- a/drivers/net/wireless/realtek/rtw88/coex.c
+++ b/drivers/net/wireless/realtek/rtw88/coex.c
@@ -4057,7 +4057,7 @@ void rtw_coex_display_coex_info(struct r
rtwdev->stats.tx_throughput, rtwdev->stats.rx_throughput);
seq_printf(m, "%-40s = %u/ %u/ %u\n",
"IPS/ Low Power/ PS mode",
- test_bit(RTW_FLAG_INACTIVE_PS, rtwdev->flags),
+ !test_bit(RTW_FLAG_POWERON, rtwdev->flags),
test_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags),
rtwdev->lps_conf.mode);
--- a/drivers/net/wireless/realtek/rtw88/mac.c
+++ b/drivers/net/wireless/realtek/rtw88/mac.c
@@ -273,6 +273,11 @@ static int rtw_mac_power_switch(struct r
if (rtw_pwr_seq_parser(rtwdev, pwr_seq))
return -EINVAL;
+ if (pwr_on)
+ set_bit(RTW_FLAG_POWERON, rtwdev->flags);
+ else
+ clear_bit(RTW_FLAG_POWERON, rtwdev->flags);
+
return 0;
}
@@ -335,6 +340,11 @@ int rtw_mac_power_on(struct rtw_dev *rtw
ret = rtw_mac_power_switch(rtwdev, true);
if (ret == -EALREADY) {
rtw_mac_power_switch(rtwdev, false);
+
+ ret = rtw_mac_pre_system_cfg(rtwdev);
+ if (ret)
+ goto err;
+
ret = rtw_mac_power_switch(rtwdev, true);
if (ret)
goto err;
--- a/drivers/net/wireless/realtek/rtw88/main.h
+++ b/drivers/net/wireless/realtek/rtw88/main.h
@@ -356,7 +356,7 @@ enum rtw_flags {
RTW_FLAG_RUNNING,
RTW_FLAG_FW_RUNNING,
RTW_FLAG_SCANNING,
- RTW_FLAG_INACTIVE_PS,
+ RTW_FLAG_POWERON,
RTW_FLAG_LEISURE_PS,
RTW_FLAG_LEISURE_PS_DEEP,
RTW_FLAG_DIG_DISABLE,
--- a/drivers/net/wireless/realtek/rtw88/ps.c
+++ b/drivers/net/wireless/realtek/rtw88/ps.c
@@ -25,7 +25,7 @@ static int rtw_ips_pwr_up(struct rtw_dev
int rtw_enter_ips(struct rtw_dev *rtwdev)
{
- if (test_and_set_bit(RTW_FLAG_INACTIVE_PS, rtwdev->flags))
+ if (!test_bit(RTW_FLAG_POWERON, rtwdev->flags))
return 0;
rtw_coex_ips_notify(rtwdev, COEX_IPS_ENTER);
@@ -50,7 +50,7 @@ int rtw_leave_ips(struct rtw_dev *rtwdev
{
int ret;
- if (!test_and_clear_bit(RTW_FLAG_INACTIVE_PS, rtwdev->flags))
+ if (test_bit(RTW_FLAG_POWERON, rtwdev->flags))
return 0;
rtw_hci_link_ps(rtwdev, false);
--- a/drivers/net/wireless/realtek/rtw88/wow.c
+++ b/drivers/net/wireless/realtek/rtw88/wow.c
@@ -592,7 +592,7 @@ static int rtw_wow_leave_no_link_ps(stru
if (rtw_get_lps_deep_mode(rtwdev) != LPS_DEEP_MODE_NONE)
rtw_leave_lps_deep(rtwdev);
} else {
- if (test_bit(RTW_FLAG_INACTIVE_PS, rtwdev->flags)) {
+ if (!test_bit(RTW_FLAG_POWERON, rtwdev->flags)) {
rtw_wow->ips_enabled = true;
ret = rtw_leave_ips(rtwdev);
if (ret)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 797/885] wifi: rtl8xxxu: Use a longer retry limit of 48
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (795 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 796/885] wifi: rtw88: use RTW_FLAG_POWERON flag to prevent to power on/off twice Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 798/885] wifi: ath11k: allow system suspend to survive ath11k Greg Kroah-Hartman
` (90 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bitterblue Smith, Ping-Ke Shih, Kalle Valo
From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
commit 2a86aa9a1892d60ef2e3f310f5b42b8b05546d65 upstream.
The Realtek rate control algorithm goes back and forth a lot between
the highest and the lowest rate it's allowed to use. This is due to
a lot of frames being dropped because the retry limits set by
IEEE80211_CONF_CHANGE_RETRY_LIMITS are too low. (Experimentally, they
are 4 for long frames and 7 for short frames.)
The vendor drivers hardcode the value 48 for both retry limits (for
station mode), which makes dropped frames very rare and thus the rate
control is more stable.
Because most Realtek chips handle the rate control in the firmware,
which can't be modified, ignore the limits set by
IEEE80211_CONF_CHANGE_RETRY_LIMITS and use the value 48 (set during
chip initialisation), same as the vendor drivers.
Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/477d745b-6bac-111d-403c-487fc19aa30d@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 9 ---------
1 file changed, 9 deletions(-)
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5966,7 +5966,6 @@ static int rtl8xxxu_config(struct ieee80
{
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
- u16 val16;
int ret = 0, channel;
bool ht40;
@@ -5976,14 +5975,6 @@ static int rtl8xxxu_config(struct ieee80
__func__, hw->conf.chandef.chan->hw_value,
changed, hw->conf.chandef.width);
- if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
- val16 = ((hw->conf.long_frame_max_tx_count <<
- RETRY_LIMIT_LONG_SHIFT) & RETRY_LIMIT_LONG_MASK) |
- ((hw->conf.short_frame_max_tx_count <<
- RETRY_LIMIT_SHORT_SHIFT) & RETRY_LIMIT_SHORT_MASK);
- rtl8xxxu_write16(priv, REG_RETRY_LIMIT, val16);
- }
-
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
switch (hw->conf.chandef.width) {
case NL80211_CHAN_WIDTH_20_NOHT:
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 798/885] wifi: ath11k: allow system suspend to survive ath11k
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (796 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 797/885] wifi: rtl8xxxu: Use a longer retry limit of 48 Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 799/885] wifi: cfg80211: Fix use after free for wext Greg Kroah-Hartman
` (89 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Len Brown, Kalle Valo
From: Len Brown <len.brown@intel.com>
commit 7c15430822e71e90203d87e6d0cfe83fa058b0dc upstream.
When ath11k runs into internal errors upon suspend,
it returns an error code to pci_pm_suspend, which
aborts the entire system suspend.
The driver should not abort system suspend, but should
keep its internal errors to itself, and allow the system
to suspend. Otherwise, a user can suspend a laptop
by closing the lid and sealing it into a case, assuming
that is will suspend, rather than heating up and draining
the battery when in transit.
In practice, the ath11k device seems to have plenty of transient
errors, and subsequent suspend cycles after this failure
often succeed.
https://bugzilla.kernel.org/show_bug.cgi?id=216968
Fixes: d1b0c33850d29 ("ath11k: implement suspend for QCA6390 PCI devices")
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230201183201.14431-1-len.brown@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/ath/ath11k/pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -979,7 +979,7 @@ static __maybe_unused int ath11k_pci_pm_
if (ret)
ath11k_warn(ab, "failed to suspend core: %d\n", ret);
- return ret;
+ return 0;
}
static __maybe_unused int ath11k_pci_pm_resume(struct device *dev)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 799/885] wifi: cfg80211: Fix use after free for wext
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (797 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 798/885] wifi: ath11k: allow system suspend to survive ath11k Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 800/885] wifi: cfg80211: Set SSID if it is not already set Greg Kroah-Hartman
` (88 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Alexander Wetzel, Johannes Berg
From: Alexander Wetzel <alexander@wetzel-home.de>
commit 015b8cc5e7c4d7bb671f1984d7b7338c310b185b upstream.
Key information in wext.connect is not reset on (re)connect and can hold
data from a previous connection.
Reset key data to avoid that drivers or mac80211 incorrectly detect a
WEP connection request and access the freed or already reused memory.
Additionally optimize cfg80211_sme_connect() and avoid an useless
schedule of conn_work.
Fixes: fffd0934b939 ("cfg80211: rework key operation")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230124141856.356646-1-alexander@wetzel-home.de
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/wireless/sme.c | 31 ++++++++++++++++++++++++++-----
1 file changed, 26 insertions(+), 5 deletions(-)
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -285,6 +285,15 @@ void cfg80211_conn_work(struct work_stru
wiphy_unlock(&rdev->wiphy);
}
+static void cfg80211_step_auth_next(struct cfg80211_conn *conn,
+ struct cfg80211_bss *bss)
+{
+ memcpy(conn->bssid, bss->bssid, ETH_ALEN);
+ conn->params.bssid = conn->bssid;
+ conn->params.channel = bss->channel;
+ conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
+}
+
/* Returned bss is reference counted and must be cleaned up appropriately. */
static struct cfg80211_bss *cfg80211_get_conn_bss(struct wireless_dev *wdev)
{
@@ -302,10 +311,7 @@ static struct cfg80211_bss *cfg80211_get
if (!bss)
return NULL;
- memcpy(wdev->conn->bssid, bss->bssid, ETH_ALEN);
- wdev->conn->params.bssid = wdev->conn->bssid;
- wdev->conn->params.channel = bss->channel;
- wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
+ cfg80211_step_auth_next(wdev->conn, bss);
schedule_work(&rdev->conn_work);
return bss;
@@ -597,7 +603,12 @@ static int cfg80211_sme_connect(struct w
wdev->conn->params.ssid_len = wdev->u.client.ssid_len;
/* see if we have the bss already */
- bss = cfg80211_get_conn_bss(wdev);
+ bss = cfg80211_get_bss(wdev->wiphy, wdev->conn->params.channel,
+ wdev->conn->params.bssid,
+ wdev->conn->params.ssid,
+ wdev->conn->params.ssid_len,
+ wdev->conn_bss_type,
+ IEEE80211_PRIVACY(wdev->conn->params.privacy));
if (prev_bssid) {
memcpy(wdev->conn->prev_bssid, prev_bssid, ETH_ALEN);
@@ -608,6 +619,7 @@ static int cfg80211_sme_connect(struct w
if (bss) {
enum nl80211_timeout_reason treason;
+ cfg80211_step_auth_next(wdev->conn, bss);
err = cfg80211_conn_do_work(wdev, &treason);
cfg80211_put_bss(wdev->wiphy, bss);
} else {
@@ -1450,6 +1462,15 @@ int cfg80211_connect(struct cfg80211_reg
} else {
if (WARN_ON(connkeys))
return -EINVAL;
+
+ /* connect can point to wdev->wext.connect which
+ * can hold key data from a previous connection
+ */
+ connect->key = NULL;
+ connect->key_len = 0;
+ connect->key_idx = 0;
+ connect->crypto.cipher_group = 0;
+ connect->crypto.n_ciphers_pairwise = 0;
}
wdev->connect_keys = connkeys;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 800/885] wifi: cfg80211: Set SSID if it is not already set
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (798 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 799/885] wifi: cfg80211: Fix use after free for wext Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 801/885] cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies Greg Kroah-Hartman
` (87 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yohan Prodhomme, Marc Bornand,
Johannes Berg
From: Marc Bornand <dev.mbornand@systemb.ch>
commit c38c701851011c94ce3be1ccb3593678d2933fd8 upstream.
When a connection was established without going through
NL80211_CMD_CONNECT, the ssid was never set in the wireless_dev struct.
Now we set it in __cfg80211_connect_result() when it is not already set.
When using a userspace configuration that does not call
cfg80211_connect() (can be checked with breakpoints in the kernel),
this patch should allow `networkctl status device_name` to output the
SSID instead of null.
Cc: stable@vger.kernel.org
Reported-by: Yohan Prod'homme <kernel@zoddo.fr>
Fixes: 7b0a0e3c3a88 (wifi: cfg80211: do some rework towards MLO link APIs)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216711
Signed-off-by: Marc Bornand <dev.mbornand@systemb.ch>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/wireless/sme.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -736,6 +736,7 @@ void __cfg80211_connect_result(struct ne
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
const struct element *country_elem = NULL;
+ const struct element *ssid;
const u8 *country_data;
u8 country_datalen;
#ifdef CONFIG_CFG80211_WEXT
@@ -881,6 +882,22 @@ void __cfg80211_connect_result(struct ne
country_data, country_datalen);
kfree(country_data);
+ if (!wdev->u.client.ssid_len) {
+ rcu_read_lock();
+ for_each_valid_link(cr, link) {
+ ssid = ieee80211_bss_get_elem(cr->links[link].bss,
+ WLAN_EID_SSID);
+
+ if (!ssid || !ssid->datalen)
+ continue;
+
+ memcpy(wdev->u.client.ssid, ssid->data, ssid->datalen);
+ wdev->u.client.ssid_len = ssid->datalen;
+ break;
+ }
+ rcu_read_unlock();
+ }
+
return;
out:
for_each_valid_link(cr, link)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 801/885] cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (799 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 800/885] wifi: cfg80211: Set SSID if it is not already set Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 802/885] qede: fix interrupt coalescing configuration Greg Kroah-Hartman
` (86 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Osipenko, Arnd Bergmann,
Thierry Reding, Rafael J. Wysocki
From: Arnd Bergmann <arnd@arndb.de>
commit 7787943a3a8ade6594a68db28c166adbb1d3708c upstream.
Some ARMv4 processors don't support suspend, which leads
to a build failure with the tegra and qualcomm cpuidle driver:
WARNING: unmet direct dependencies detected for ARM_CPU_SUSPEND
Depends on [n]: ARCH_SUSPEND_POSSIBLE [=n]
Selected by [y]:
- ARM_TEGRA_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_TEGRA [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y]
arch/arm/kernel/sleep.o: in function `__cpu_suspend':
(.text+0x68): undefined reference to `cpu_sa110_suspend_size'
(.text+0x68): undefined reference to `cpu_fa526_suspend_size'
Add an explicit dependency to make randconfig builds avoid
this combination.
Fixes: faae6c9f2e68 ("cpuidle: tegra: Enable compile testing")
Fixes: a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver")
Link: https://lore.kernel.org/all/20211013160125.772873-1-arnd@kernel.org/
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/cpuidle/Kconfig.arm | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -102,6 +102,7 @@ config ARM_MVEBU_V7_CPUIDLE
config ARM_TEGRA_CPUIDLE
bool "CPU Idle Driver for NVIDIA Tegra SoCs"
depends on (ARCH_TEGRA || COMPILE_TEST) && !ARM64 && MMU
+ depends on ARCH_SUSPEND_POSSIBLE
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select ARM_CPU_SUSPEND
help
@@ -110,6 +111,7 @@ config ARM_TEGRA_CPUIDLE
config ARM_QCOM_SPM_CPUIDLE
bool "CPU Idle Driver for Qualcomm Subsystem Power Manager (SPM)"
depends on (ARCH_QCOM || COMPILE_TEST) && !ARM64 && MMU
+ depends on ARCH_SUSPEND_POSSIBLE
select ARM_CPU_SUSPEND
select CPU_IDLE_MULTIPLE_DRIVERS
select DT_IDLE_STATES
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 802/885] qede: fix interrupt coalescing configuration
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (800 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 801/885] cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 803/885] thermal: intel: powerclamp: Fix cur_state for multi package system Greg Kroah-Hartman
` (85 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Manish Chopra, Bhaskar Upadhaya,
David S. Miller, Alok Prasad, Ariel Elior
From: Manish Chopra <manishc@marvell.com>
commit 908d4bb7c54caa58253a363d63e797a468eaf321 upstream.
On default driver load device gets configured with unexpected
higher interrupt coalescing values instead of default expected
values as memory allocated from krealloc() is not supposed to
be zeroed out and may contain garbage values.
Fix this by allocating the memory of required size first with
kcalloc() and then use krealloc() to resize and preserve the
contents across down/up of the interface.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Fixes: b0ec5489c480 ("qede: preserve per queue stats across up/down of interface")
Cc: stable@vger.kernel.org
Cc: Bhaskar Upadhaya <bupadhaya@marvell.com>
Cc: David S. Miller <davem@davemloft.net>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2160054
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/qlogic/qede/qede_main.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -970,8 +970,15 @@ static int qede_alloc_fp_array(struct qe
goto err;
}
- mem = krealloc(edev->coal_entry, QEDE_QUEUE_CNT(edev) *
- sizeof(*edev->coal_entry), GFP_KERNEL);
+ if (!edev->coal_entry) {
+ mem = kcalloc(QEDE_MAX_RSS_CNT(edev),
+ sizeof(*edev->coal_entry), GFP_KERNEL);
+ } else {
+ mem = krealloc(edev->coal_entry,
+ QEDE_QUEUE_CNT(edev) * sizeof(*edev->coal_entry),
+ GFP_KERNEL);
+ }
+
if (!mem) {
DP_ERR(edev, "coalesce entry allocation failed\n");
kfree(edev->coal_entry);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 803/885] thermal: intel: powerclamp: Fix cur_state for multi package system
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (801 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 802/885] qede: fix interrupt coalescing configuration Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 804/885] dm flakey: fix logic when corrupting a bio Greg Kroah-Hartman
` (84 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Srinivas Pandruvada, Rafael J. Wysocki
From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
commit 8e47363588377e1bdb65e2b020b409cfb44dd260 upstream.
The powerclamp cooling device cur_state shows actual idle observed by
package C-state idle counters. But the implementation is not sufficient
for multi package or multi die system. The cur_state value is incorrect.
On these systems, these counters must be read from each package/die and
somehow aggregate them. But there is no good method for aggregation.
It was not a problem when explicit CPU model addition was required to
enable intel powerclamp. In this way certain CPU models could have
been avoided. But with the removal of CPU model check with the
availability of Package C-state counters, the driver is loaded on most
of the recent systems.
For multi package/die systems, just show the actual target idle state,
the system is trying to achieve. In powerclamp this is the user set
state minus one.
Also there is no use of starting a worker thread for polling package
C-state counters and applying any compensation for multiple package
or multiple die systems.
Fixes: b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/thermal/intel/intel_powerclamp.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
--- a/drivers/thermal/intel/intel_powerclamp.c
+++ b/drivers/thermal/intel/intel_powerclamp.c
@@ -57,6 +57,7 @@
static unsigned int target_mwait;
static struct dentry *debug_dir;
+static bool poll_pkg_cstate_enable;
/* user selected target */
static unsigned int set_target_ratio;
@@ -261,6 +262,9 @@ static unsigned int get_compensation(int
{
unsigned int comp = 0;
+ if (!poll_pkg_cstate_enable)
+ return 0;
+
/* we only use compensation if all adjacent ones are good */
if (ratio == 1 &&
cal_data[ratio].confidence >= CONFIDENCE_OK &&
@@ -519,7 +523,8 @@ static int start_power_clamp(void)
control_cpu = cpumask_first(cpu_online_mask);
clamping = true;
- schedule_delayed_work(&poll_pkg_cstate_work, 0);
+ if (poll_pkg_cstate_enable)
+ schedule_delayed_work(&poll_pkg_cstate_work, 0);
/* start one kthread worker per online cpu */
for_each_online_cpu(cpu) {
@@ -585,11 +590,15 @@ static int powerclamp_get_max_state(stru
static int powerclamp_get_cur_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
- if (true == clamping)
- *state = pkg_cstate_ratio_cur;
- else
+ if (clamping) {
+ if (poll_pkg_cstate_enable)
+ *state = pkg_cstate_ratio_cur;
+ else
+ *state = set_target_ratio;
+ } else {
/* to save power, do not poll idle ratio while not clamping */
*state = -1; /* indicates invalid state */
+ }
return 0;
}
@@ -712,6 +721,9 @@ static int __init powerclamp_init(void)
goto exit_unregister;
}
+ if (topology_max_packages() == 1 && topology_max_die_per_package() == 1)
+ poll_pkg_cstate_enable = true;
+
cooling_dev = thermal_cooling_device_register("intel_powerclamp", NULL,
&powerclamp_cooling_ops);
if (IS_ERR(cooling_dev)) {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 804/885] dm flakey: fix logic when corrupting a bio
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (802 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 803/885] thermal: intel: powerclamp: Fix cur_state for multi package system Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 805/885] dm cache: free background trackers queued work in btracker_destroy Greg Kroah-Hartman
` (83 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mikulas Patocka, Sweet Tea Dorminy,
Mike Snitzer
From: Mikulas Patocka <mpatocka@redhat.com>
commit aa56b9b75996ff4c76a0a4181c2fa0206c3d91cc upstream.
If "corrupt_bio_byte" is set to corrupt reads and corrupt_bio_flags is
used, dm-flakey would erroneously return all writes as errors. Likewise,
if "corrupt_bio_byte" is set to corrupt writes, dm-flakey would return
errors for all reads.
Fix the logic so that if fc->corrupt_bio_byte is non-zero, dm-flakey
will not abort reads on writes with an error.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-flakey.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
--- a/drivers/md/dm-flakey.c
+++ b/drivers/md/dm-flakey.c
@@ -361,9 +361,11 @@ static int flakey_map(struct dm_target *
/*
* Corrupt matching writes.
*/
- if (fc->corrupt_bio_byte && (fc->corrupt_bio_rw == WRITE)) {
- if (all_corrupt_bio_flags_match(bio, fc))
- corrupt_bio_data(bio, fc);
+ if (fc->corrupt_bio_byte) {
+ if (fc->corrupt_bio_rw == WRITE) {
+ if (all_corrupt_bio_flags_match(bio, fc))
+ corrupt_bio_data(bio, fc);
+ }
goto map_bio;
}
@@ -389,13 +391,14 @@ static int flakey_end_io(struct dm_targe
return DM_ENDIO_DONE;
if (!*error && pb->bio_submitted && (bio_data_dir(bio) == READ)) {
- if (fc->corrupt_bio_byte && (fc->corrupt_bio_rw == READ) &&
- all_corrupt_bio_flags_match(bio, fc)) {
- /*
- * Corrupt successful matching READs while in down state.
- */
- corrupt_bio_data(bio, fc);
-
+ if (fc->corrupt_bio_byte) {
+ if ((fc->corrupt_bio_rw == READ) &&
+ all_corrupt_bio_flags_match(bio, fc)) {
+ /*
+ * Corrupt successful matching READs while in down state.
+ */
+ corrupt_bio_data(bio, fc);
+ }
} else if (!test_bit(DROP_WRITES, &fc->flags) &&
!test_bit(ERROR_WRITES, &fc->flags)) {
/*
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 805/885] dm cache: free background trackers queued work in btracker_destroy
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (803 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 804/885] dm flakey: fix logic when corrupting a bio Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 806/885] dm flakey: dont corrupt the zero page Greg Kroah-Hartman
` (82 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Benjamin Marzinski, Joe Thornber,
Mike Snitzer
From: Joe Thornber <ejt@redhat.com>
commit 95ab80a8a0fef2ce0cc494a306dd283948066ce7 upstream.
Otherwise the kernel can BUG with:
[ 2245.426978] =============================================================================
[ 2245.435155] BUG bt_work (Tainted: G B W ): Objects remaining in bt_work on __kmem_cache_shutdown()
[ 2245.445233] -----------------------------------------------------------------------------
[ 2245.445233]
[ 2245.454879] Slab 0x00000000b0ce2b30 objects=64 used=2 fp=0x000000000a3c6a4e flags=0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff)
[ 2245.467300] CPU: 7 PID: 10805 Comm: lvm Kdump: loaded Tainted: G B W 6.0.0-rc2 #19
[ 2245.476078] Hardware name: Dell Inc. PowerEdge R7525/0590KW, BIOS 2.5.6 10/06/2021
[ 2245.483646] Call Trace:
[ 2245.486100] <TASK>
[ 2245.488206] dump_stack_lvl+0x34/0x48
[ 2245.491878] slab_err+0x95/0xcd
[ 2245.495028] __kmem_cache_shutdown.cold+0x31/0x136
[ 2245.499821] kmem_cache_destroy+0x49/0x130
[ 2245.503928] btracker_destroy+0x12/0x20 [dm_cache]
[ 2245.508728] smq_destroy+0x15/0x60 [dm_cache_smq]
[ 2245.513435] dm_cache_policy_destroy+0x12/0x20 [dm_cache]
[ 2245.518834] destroy+0xc0/0x110 [dm_cache]
[ 2245.522933] dm_table_destroy+0x5c/0x120 [dm_mod]
[ 2245.527649] __dm_destroy+0x10e/0x1c0 [dm_mod]
[ 2245.532102] dev_remove+0x117/0x190 [dm_mod]
[ 2245.536384] ctl_ioctl+0x1a2/0x290 [dm_mod]
[ 2245.540579] dm_ctl_ioctl+0xa/0x20 [dm_mod]
[ 2245.544773] __x64_sys_ioctl+0x8a/0xc0
[ 2245.548524] do_syscall_64+0x5c/0x90
[ 2245.552104] ? syscall_exit_to_user_mode+0x12/0x30
[ 2245.556897] ? do_syscall_64+0x69/0x90
[ 2245.560648] ? do_syscall_64+0x69/0x90
[ 2245.564394] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 2245.569447] RIP: 0033:0x7fe52583ec6b
...
[ 2245.646771] ------------[ cut here ]------------
[ 2245.651395] kmem_cache_destroy bt_work: Slab cache still has objects when called from btracker_destroy+0x12/0x20 [dm_cache]
[ 2245.651408] WARNING: CPU: 7 PID: 10805 at mm/slab_common.c:478 kmem_cache_destroy+0x128/0x130
Found using: lvm2-testsuite --only "cache-single-split.sh"
Ben bisected and found that commit 0495e337b703 ("mm/slab_common:
Deleting kobject in kmem_cache_destroy() without holding
slab_mutex/cpu_hotplug_lock") first exposed dm-cache's incomplete
cleanup of its background tracker work objects.
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Tested-by: Benjamin Marzinski <bmarzins@redhat.com>
Cc: stable@vger.kernel.org # 6.0+
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-cache-background-tracker.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/md/dm-cache-background-tracker.c b/drivers/md/dm-cache-background-tracker.c
index 84814e819e4c..7887f99b82bd 100644
--- a/drivers/md/dm-cache-background-tracker.c
+++ b/drivers/md/dm-cache-background-tracker.c
@@ -60,6 +60,14 @@ EXPORT_SYMBOL_GPL(btracker_create);
void btracker_destroy(struct background_tracker *b)
{
+ struct bt_work *w, *tmp;
+
+ BUG_ON(!list_empty(&b->issued));
+ list_for_each_entry_safe (w, tmp, &b->queued, list) {
+ list_del(&w->list);
+ kmem_cache_free(b->work_cache, w);
+ }
+
kmem_cache_destroy(b->work_cache);
kfree(b);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 806/885] dm flakey: dont corrupt the zero page
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (804 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 805/885] dm cache: free background trackers queued work in btracker_destroy Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 807/885] dm flakey: fix a bug with 32-bit highmem systems Greg Kroah-Hartman
` (81 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mikulas Patocka, Sweet Tea Dorminy,
Mike Snitzer
From: Mikulas Patocka <mpatocka@redhat.com>
commit f50714b57aecb6b3dc81d578e295f86d9c73f078 upstream.
When we need to zero some range on a block device, the function
__blkdev_issue_zero_pages submits a write bio with the bio vector pointing
to the zero page. If we use dm-flakey with corrupt bio writes option, it
will corrupt the content of the zero page which results in crashes of
various userspace programs. Glibc assumes that memory returned by mmap is
zeroed and it uses it for calloc implementation; if the newly mapped
memory is not zeroed, calloc will return non-zeroed memory.
Fix this bug by testing if the page is equal to ZERO_PAGE(0) and
avoiding the corruption in this case.
Cc: stable@vger.kernel.org
Fixes: a00f5276e266 ("dm flakey: Properly corrupt multi-page bios.")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-flakey.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/md/dm-flakey.c
+++ b/drivers/md/dm-flakey.c
@@ -303,8 +303,11 @@ static void corrupt_bio_data(struct bio
*/
bio_for_each_segment(bvec, bio, iter) {
if (bio_iter_len(bio, iter) > corrupt_bio_byte) {
- char *segment = (page_address(bio_iter_page(bio, iter))
- + bio_iter_offset(bio, iter));
+ char *segment;
+ struct page *page = bio_iter_page(bio, iter);
+ if (unlikely(page == ZERO_PAGE(0)))
+ break;
+ segment = (page_address(page) + bio_iter_offset(bio, iter));
segment[corrupt_bio_byte] = fc->corrupt_bio_value;
DMDEBUG("Corrupting data bio=%p by writing %u to byte %u "
"(rw=%c bi_opf=%u bi_sector=%llu size=%u)\n",
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 807/885] dm flakey: fix a bug with 32-bit highmem systems
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (805 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 806/885] dm flakey: dont corrupt the zero page Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 808/885] hwmon: (peci/cputemp) Fix off-by-one in coretemp_label allocation Greg Kroah-Hartman
` (80 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mikulas Patocka, Sweet Tea Dorminy,
Mike Snitzer
From: Mikulas Patocka <mpatocka@redhat.com>
commit 8eb29c4fbf9661e6bd4dd86197a37ffe0ecc9d50 upstream.
The function page_address does not work with 32-bit systems with high
memory. Use bvec_kmap_local/kunmap_local instead.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-flakey.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/md/dm-flakey.c
+++ b/drivers/md/dm-flakey.c
@@ -307,8 +307,9 @@ static void corrupt_bio_data(struct bio
struct page *page = bio_iter_page(bio, iter);
if (unlikely(page == ZERO_PAGE(0)))
break;
- segment = (page_address(page) + bio_iter_offset(bio, iter));
+ segment = bvec_kmap_local(&bvec);
segment[corrupt_bio_byte] = fc->corrupt_bio_value;
+ kunmap_local(segment);
DMDEBUG("Corrupting data bio=%p by writing %u to byte %u "
"(rw=%c bi_opf=%u bi_sector=%llu size=%u)\n",
bio, fc->corrupt_bio_value, fc->corrupt_bio_byte,
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 808/885] hwmon: (peci/cputemp) Fix off-by-one in coretemp_label allocation
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (806 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 807/885] dm flakey: fix a bug with 32-bit highmem systems Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 809/885] hwmon: (nct6775) Fix incorrect parenthesization in nct6775_write_fan_div() Greg Kroah-Hartman
` (79 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zev Weiss, Iwona Winiarska,
Guenter Roeck, stable
From: Zev Weiss <zev@bewilderbeest.net>
commit f00093608fa790580da309bb9feb5108fbe7c331 upstream.
The find_last_bit() call produces the index of the highest-numbered
core in core_mask; because cores are numbered from zero, the number of
elements we need to allocate is one more than that.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@kernel.org # v5.18
Fixes: bf3608f338e9 ("hwmon: peci: Add cputemp driver")
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20230202021825.21486-1-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hwmon/peci/cputemp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/peci/cputemp.c b/drivers/hwmon/peci/cputemp.c
index 57470fda5f6c..30850a479f61 100644
--- a/drivers/hwmon/peci/cputemp.c
+++ b/drivers/hwmon/peci/cputemp.c
@@ -402,7 +402,7 @@ static int create_temp_label(struct peci_cputemp *priv)
unsigned long core_max = find_last_bit(priv->core_mask, CORE_NUMS_MAX);
int i;
- priv->coretemp_label = devm_kzalloc(priv->dev, core_max * sizeof(char *), GFP_KERNEL);
+ priv->coretemp_label = devm_kzalloc(priv->dev, (core_max + 1) * sizeof(char *), GFP_KERNEL);
if (!priv->coretemp_label)
return -ENOMEM;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 809/885] hwmon: (nct6775) Fix incorrect parenthesization in nct6775_write_fan_div()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (807 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 808/885] hwmon: (peci/cputemp) Fix off-by-one in coretemp_label allocation Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 810/885] ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node Greg Kroah-Hartman
` (78 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zev Weiss, Guenter Roeck, stable
From: Zev Weiss <zev@bewilderbeest.net>
commit 2fbb848b65cde5b876cce52ebcb34de4aaa5a94a upstream.
Commit 4ef2774511dc ("hwmon: (nct6775) Convert register access to
regmap API") fumbled the shifting & masking of the fan_div values such
that odd-numbered fan divisors would always be set to zero. Fix it so
that we actually OR in the bits we meant to.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 4ef2774511dc ("hwmon: (nct6775) Convert register access to regmap API")
Cc: stable@kernel.org # v5.19+
Link: https://lore.kernel.org/r/20230102212857.5670-1-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hwmon/nct6775-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/nct6775-core.c b/drivers/hwmon/nct6775-core.c
index da9ec6983e13..c54233f0369b 100644
--- a/drivers/hwmon/nct6775-core.c
+++ b/drivers/hwmon/nct6775-core.c
@@ -1150,7 +1150,7 @@ static int nct6775_write_fan_div(struct nct6775_data *data, int nr)
if (err)
return err;
reg &= 0x70 >> oddshift;
- reg |= data->fan_div[nr] & (0x7 << oddshift);
+ reg |= (data->fan_div[nr] & 0x7) << oddshift;
return nct6775_write_value(data, fandiv_reg, reg);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 810/885] ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (808 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 809/885] hwmon: (nct6775) Fix incorrect parenthesization in nct6775_write_fan_div() Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 811/885] ARM: dts: qcom: sdx55: " Greg Kroah-Hartman
` (77 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Manivannan Sadhasivam,
Konrad Dybcio, Bjorn Andersson
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
commit 157178a7912e00a0aa0371dc9041952c1a21d112 upstream.
SDX65 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500"
compatible as the fallback to the SoC specific compatible.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: 98187f7b74bf ("ARM: dts: qcom: sdx65: Enable ARM SMMU")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123131931.263024-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/qcom-sdx65.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -455,7 +455,7 @@
};
apps_smmu: iommu@15000000 {
- compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
+ compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500";
reg = <0x15000000 0x40000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 811/885] ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (809 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 810/885] ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 812/885] ARM: dts: exynos: correct TMU phandle in Exynos4210 Greg Kroah-Hartman
` (76 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Manivannan Sadhasivam,
Konrad Dybcio, Bjorn Andersson
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
commit af4ab377543853b690cc85b4c46cf976ab560dc2 upstream.
SDX55 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500"
compatible as the fallback to the SoC specific compatible.
Cc: <stable@vger.kernel.org> # 5.12
Fixes: a2bdfdfba2af ("ARM: dts: qcom: sdx55: Enable ARM SMMU")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123131931.263024-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/qcom-sdx55.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -577,7 +577,7 @@
};
apps_smmu: iommu@15000000 {
- compatible = "qcom,sdx55-smmu-500", "arm,mmu-500";
+ compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
reg = <0x15000000 0x20000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 812/885] ARM: dts: exynos: correct TMU phandle in Exynos4210
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (810 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 811/885] ARM: dts: qcom: sdx55: " Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 813/885] ARM: dts: exynos: correct TMU phandle in Exynos4 Greg Kroah-Hartman
` (75 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
commit 408ab6786dbf6dd696488054c9559681112ef994 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property is
already defined in included exynos4-cpu-thermal.dtsi, drop it from
exynos4210.dtsi to fix the error and remoev redundancy.
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/exynos4210.dtsi | 1 -
1 file changed, 1 deletion(-)
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -393,7 +393,6 @@
&cpu_thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
- thermal-sensors = <&tmu 0>;
};
&gic {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 813/885] ARM: dts: exynos: correct TMU phandle in Exynos4
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (811 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 812/885] ARM: dts: exynos: correct TMU phandle in Exynos4210 Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 814/885] ARM: dts: exynos: correct TMU phandle in Odroid XU3 family Greg Kroah-Hartman
` (74 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
commit 8e4505e617a80f601e2f53a917611777f128f925 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Fixes: 328829a6ad70 ("ARM: dts: define default thermal-zones for exynos4")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/exynos4-cpu-thermal.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -10,7 +10,7 @@
/ {
thermal-zones {
cpu_thermal: cpu-thermal {
- thermal-sensors = <&tmu 0>;
+ thermal-sensors = <&tmu>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 814/885] ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (812 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 813/885] ARM: dts: exynos: correct TMU phandle in Exynos4 Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 815/885] ARM: dts: exynos: correct TMU phandle in Exynos5250 Greg Kroah-Hartman
` (73 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
commit a3583e92d188ec6c58c7f603ac5e72dd8a11c21a upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: f1722d7dd8b8 ("ARM: dts: Define default thermal-zones for exynos5422")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -50,7 +50,7 @@
thermal-zones {
cpu0_thermal: cpu0-thermal {
- thermal-sensors = <&tmu_cpu0 0>;
+ thermal-sensors = <&tmu_cpu0>;
polling-delay-passive = <250>;
polling-delay = <0>;
trips {
@@ -139,7 +139,7 @@
};
};
cpu1_thermal: cpu1-thermal {
- thermal-sensors = <&tmu_cpu1 0>;
+ thermal-sensors = <&tmu_cpu1>;
polling-delay-passive = <250>;
polling-delay = <0>;
trips {
@@ -212,7 +212,7 @@
};
};
cpu2_thermal: cpu2-thermal {
- thermal-sensors = <&tmu_cpu2 0>;
+ thermal-sensors = <&tmu_cpu2>;
polling-delay-passive = <250>;
polling-delay = <0>;
trips {
@@ -285,7 +285,7 @@
};
};
cpu3_thermal: cpu3-thermal {
- thermal-sensors = <&tmu_cpu3 0>;
+ thermal-sensors = <&tmu_cpu3>;
polling-delay-passive = <250>;
polling-delay = <0>;
trips {
@@ -358,7 +358,7 @@
};
};
gpu_thermal: gpu-thermal {
- thermal-sensors = <&tmu_gpu 0>;
+ thermal-sensors = <&tmu_gpu>;
polling-delay-passive = <250>;
polling-delay = <0>;
trips {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 815/885] ARM: dts: exynos: correct TMU phandle in Exynos5250
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (813 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 814/885] ARM: dts: exynos: correct TMU phandle in Odroid XU3 family Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 816/885] ARM: dts: exynos: correct TMU phandle in Odroid XU Greg Kroah-Hartman
` (72 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
commit 33e2c595e2e4016991ead44933a29d1ef93d5f26 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Cc: <stable@vger.kernel.org>
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Link: https://lore.kernel.org/r/20230209105841.779596-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/exynos5250.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -1107,7 +1107,7 @@
&cpu_thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
- thermal-sensors = <&tmu 0>;
+ thermal-sensors = <&tmu>;
cooling-maps {
map0 {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 816/885] ARM: dts: exynos: correct TMU phandle in Odroid XU
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (814 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 815/885] ARM: dts: exynos: correct TMU phandle in Exynos5250 Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 817/885] ARM: dts: exynos: correct TMU phandle in Odroid HC1 Greg Kroah-Hartman
` (71 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
commit 9372eca505e7a19934d750b4b4c89a3652738e66 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property
is already defined in included exynosi5410.dtsi, drop it from
exynos5410-odroidxu.dts to fix the error and remoev redundancy.
Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/exynos5410-odroidxu.dts | 1 -
1 file changed, 1 deletion(-)
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -120,7 +120,6 @@
};
&cpu0_thermal {
- thermal-sensors = <&tmu_cpu0 0>;
polling-delay-passive = <0>;
polling-delay = <0>;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 817/885] ARM: dts: exynos: correct TMU phandle in Odroid HC1
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (815 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 816/885] ARM: dts: exynos: correct TMU phandle in Odroid XU Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 818/885] arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP Greg Kroah-Hartman
` (70 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
commit 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/exynos5422-odroidhc1.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -31,7 +31,7 @@
thermal-zones {
cpu0_thermal: cpu0-thermal {
- thermal-sensors = <&tmu_cpu0 0>;
+ thermal-sensors = <&tmu_cpu0>;
trips {
cpu0_alert0: cpu-alert-0 {
temperature = <70000>; /* millicelsius */
@@ -86,7 +86,7 @@
};
};
cpu1_thermal: cpu1-thermal {
- thermal-sensors = <&tmu_cpu1 0>;
+ thermal-sensors = <&tmu_cpu1>;
trips {
cpu1_alert0: cpu-alert-0 {
temperature = <70000>;
@@ -130,7 +130,7 @@
};
};
cpu2_thermal: cpu2-thermal {
- thermal-sensors = <&tmu_cpu2 0>;
+ thermal-sensors = <&tmu_cpu2>;
trips {
cpu2_alert0: cpu-alert-0 {
temperature = <70000>;
@@ -174,7 +174,7 @@
};
};
cpu3_thermal: cpu3-thermal {
- thermal-sensors = <&tmu_cpu3 0>;
+ thermal-sensors = <&tmu_cpu3>;
trips {
cpu3_alert0: cpu-alert-0 {
temperature = <70000>;
@@ -218,7 +218,7 @@
};
};
gpu_thermal: gpu-thermal {
- thermal-sensors = <&tmu_gpu 0>;
+ thermal-sensors = <&tmu_gpu>;
trips {
gpu_alert0: gpu-alert-0 {
temperature = <70000>;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 818/885] arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (816 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 817/885] ARM: dts: exynos: correct TMU phandle in Odroid HC1 Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 819/885] fuse: add inode/permission checks to fileattr_get/fileattr_set Greg Kroah-Hartman
` (69 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Muchun Song, Will Deacon,
Anshuman Khandual, Catalin Marinas
From: Catalin Marinas <catalin.marinas@arm.com>
commit 060a2c92d1b627c86c5c42ca69baf00457c00c5a upstream.
Revert the HUGETLB_PAGE_FREE_VMEMMAP selection from commit 1e63ac088f20
("arm64: mm: hugetlb: enable HUGETLB_PAGE_FREE_VMEMMAP for arm64") but
keep the flush_dcache_page() compound_head() change as it aligns with
the corresponding check in the __sync_icache_dcache() function.
The original config option was renamed in commit 47010c040dec ("mm:
hugetlb_vmemmap: cleanup CONFIG_HUGETLB_PAGE_FREE_VMEMMAP*") to
HUGETLB_PAGE_OPTIMIZE_VMEMMAP and the flush_dcache_page() check was
further simplified by commit 2da1c30929a2 ("mm: hugetlb_vmemmap: delete
hugetlb_optimize_vmemmap_enabled()").
The reason for the revert is that the generic vmemmap_remap_pte()
function changes both the permissions (writeable to read-only) and the
output address (pfn) of the vmemmap ptes. This is deemed UNPREDICTABLE
by the Arm architecture without a break-before-make sequence (make the
PTE invalid, TLBI, write the new valid PTE). However, such sequence is
not possible since the vmemmap may be concurrently accessed by the
kernel. Disable the optimisation until a better solution is found.
Fixes: 1e63ac088f20 ("arm64: mm: hugetlb: enable HUGETLB_PAGE_FREE_VMEMMAP for arm64")
Cc: <stable@vger.kernel.org> # 5.19.x
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/Y9pZALdn3pKiJUeQ@arm.com
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230222175232.540851-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/Kconfig | 1 -
1 file changed, 1 deletion(-)
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -98,7 +98,6 @@ config ARM64
select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
select ARCH_WANT_FRAME_POINTERS
select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
- select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
select ARCH_WANT_LD_ORPHAN_WARN
select ARCH_WANTS_NO_INSTR
select ARCH_WANTS_THP_SWAP if ARM64_4K_PAGES
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 819/885] fuse: add inode/permission checks to fileattr_get/fileattr_set
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (817 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 818/885] arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 820/885] rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails Greg Kroah-Hartman
` (68 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Alexander Mikhalitsyn, Miklos Szeredi
From: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
commit 1cc4606d19e3710bfab3f6704b87ff9580493c69 upstream.
It looks like these checks were accidentally lost during the conversion to
fileattr API.
Fixes: 72227eac177d ("fuse: convert to fileattr")
Cc: <stable@vger.kernel.org> # v5.13
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/fuse/ioctl.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/fs/fuse/ioctl.c
+++ b/fs/fuse/ioctl.c
@@ -419,6 +419,12 @@ static struct fuse_file *fuse_priv_ioctl
struct fuse_mount *fm = get_fuse_mount(inode);
bool isdir = S_ISDIR(inode->i_mode);
+ if (!fuse_allow_current_process(fm->fc))
+ return ERR_PTR(-EACCES);
+
+ if (fuse_is_bad(inode))
+ return ERR_PTR(-EIO);
+
if (!S_ISREG(inode->i_mode) && !isdir)
return ERR_PTR(-ENOTTY);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 820/885] rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (818 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 819/885] fuse: add inode/permission checks to fileattr_get/fileattr_set Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 821/885] ceph: update the time stamps and try to drop the suid/sgid Greg Kroah-Hartman
` (67 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Ilya Dryomov
From: Ilya Dryomov <idryomov@gmail.com>
commit f7c4d9b133c7a04ca619355574e96b6abf209fba upstream.
If getting an ID or setting up a work queue in rbd_dev_create() fails,
use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts
is triggered in do_rbd_add(). The root cause is that the ownership of
these structures is transfered to rbd_dev prematurely and they all end
up getting freed when rbd_dev_create() calls rbd_dev_free() prior to
returning to do_rbd_add().
Found by Linux Verification Center (linuxtesting.org) with SVACE, an
incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>.
Cc: stable@vger.kernel.org
Fixes: 1643dfa4c2c8 ("rbd: introduce a per-device ordered workqueue")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/rbd.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -5292,8 +5292,7 @@ static void rbd_dev_release(struct devic
module_put(THIS_MODULE);
}
-static struct rbd_device *__rbd_dev_create(struct rbd_client *rbdc,
- struct rbd_spec *spec)
+static struct rbd_device *__rbd_dev_create(struct rbd_spec *spec)
{
struct rbd_device *rbd_dev;
@@ -5338,9 +5337,6 @@ static struct rbd_device *__rbd_dev_crea
rbd_dev->dev.parent = &rbd_root_dev;
device_initialize(&rbd_dev->dev);
- rbd_dev->rbd_client = rbdc;
- rbd_dev->spec = spec;
-
return rbd_dev;
}
@@ -5353,12 +5349,10 @@ static struct rbd_device *rbd_dev_create
{
struct rbd_device *rbd_dev;
- rbd_dev = __rbd_dev_create(rbdc, spec);
+ rbd_dev = __rbd_dev_create(spec);
if (!rbd_dev)
return NULL;
- rbd_dev->opts = opts;
-
/* get an id and fill in device name */
rbd_dev->dev_id = ida_simple_get(&rbd_dev_id_ida, 0,
minor_to_rbd_dev_id(1 << MINORBITS),
@@ -5375,6 +5369,10 @@ static struct rbd_device *rbd_dev_create
/* we have a ref from do_rbd_add() */
__module_get(THIS_MODULE);
+ rbd_dev->rbd_client = rbdc;
+ rbd_dev->spec = spec;
+ rbd_dev->opts = opts;
+
dout("%s rbd_dev %p dev_id %d\n", __func__, rbd_dev, rbd_dev->dev_id);
return rbd_dev;
@@ -6736,7 +6734,7 @@ static int rbd_dev_probe_parent(struct r
goto out_err;
}
- parent = __rbd_dev_create(rbd_dev->rbd_client, rbd_dev->parent_spec);
+ parent = __rbd_dev_create(rbd_dev->parent_spec);
if (!parent) {
ret = -ENOMEM;
goto out_err;
@@ -6746,8 +6744,8 @@ static int rbd_dev_probe_parent(struct r
* Images related by parent/child relationships always share
* rbd_client and spec/parent_spec, so bump their refcounts.
*/
- __rbd_get_client(rbd_dev->rbd_client);
- rbd_spec_get(rbd_dev->parent_spec);
+ parent->rbd_client = __rbd_get_client(rbd_dev->rbd_client);
+ parent->spec = rbd_spec_get(rbd_dev->parent_spec);
__set_bit(RBD_DEV_FLAG_READONLY, &parent->flags);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 821/885] ceph: update the time stamps and try to drop the suid/sgid
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (819 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 820/885] rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 822/885] regulator: core: Use ktime_get_boottime() to determine how long a regulator was off Greg Kroah-Hartman
` (66 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Xiubo Li, Jeff Layton, Ilya Dryomov
From: Xiubo Li <xiubli@redhat.com>
commit e027253c4b77d395798600a90b6a96fe4adf4d5e upstream.
The fallocate will try to clear the suid/sgid if a unprevileged user
changed the file.
There is no POSIX item requires that we should clear the suid/sgid
in fallocate code path but this is the default behaviour for most of
the filesystems and the VFS layer. And also the same for the write
code path, which have already support it.
And also we need to update the time stamps since the fallocate will
change the file contents.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/58054
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ceph/file.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -2095,6 +2095,9 @@ static long ceph_fallocate(struct file *
loff_t endoff = 0;
loff_t size;
+ dout("%s %p %llx.%llx mode %x, offset %llu length %llu\n", __func__,
+ inode, ceph_vinop(inode), mode, offset, length);
+
if (mode != (FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE))
return -EOPNOTSUPP;
@@ -2129,6 +2132,10 @@ static long ceph_fallocate(struct file *
if (ret < 0)
goto unlock;
+ ret = file_modified(file);
+ if (ret)
+ goto put_caps;
+
filemap_invalidate_lock(inode->i_mapping);
ceph_fscache_invalidate(inode, false);
ceph_zero_pagecache_range(inode, offset, length);
@@ -2144,6 +2151,7 @@ static long ceph_fallocate(struct file *
}
filemap_invalidate_unlock(inode->i_mapping);
+put_caps:
ceph_put_cap_refs(ci, got);
unlock:
inode_unlock(inode);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 822/885] regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (820 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 821/885] ceph: update the time stamps and try to drop the suid/sgid Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 823/885] panic: fix the panic_print NMI backtrace setting Greg Kroah-Hartman
` (65 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Matthias Kaehlcke, Stephen Boyd, Mark Brown
From: Matthias Kaehlcke <mka@chromium.org>
commit 80d2c29e09e663761c2778167a625b25ffe01b6f upstream.
For regulators with 'off-on-delay-us' the regulator framework currently
uses ktime_get() to determine how long the regulator has been off
before re-enabling it (after a delay if needed). A problem with using
ktime_get() is that it doesn't account for the time the system is
suspended. As a result a regulator with a longer 'off-on-delay' (e.g.
500ms) that was switched off during suspend might still incurr in a
delay on resume before it is re-enabled, even though the regulator
might have been off for hours. ktime_get_boottime() accounts for
suspend time, use it instead of ktime_get().
Fixes: a8ce7bd89689 ("regulator: core: Fix off_on_delay handling")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230223003301.v2.1.I9719661b8eb0a73b8c416f9c26cf5bd8c0563f99@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/regulator/core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1584,7 +1584,7 @@ static int set_machine_constraints(struc
}
if (rdev->desc->off_on_delay)
- rdev->last_off = ktime_get();
+ rdev->last_off = ktime_get_boottime();
/* If the constraints say the regulator should be on at this point
* and we have control then make sure it is enabled.
@@ -2673,7 +2673,7 @@ static int _regulator_do_enable(struct r
* this regulator was disabled.
*/
ktime_t end = ktime_add_us(rdev->last_off, rdev->desc->off_on_delay);
- s64 remaining = ktime_us_delta(end, ktime_get());
+ s64 remaining = ktime_us_delta(end, ktime_get_boottime());
if (remaining > 0)
_regulator_delay_helper(remaining);
@@ -2912,7 +2912,7 @@ static int _regulator_do_disable(struct
}
if (rdev->desc->off_on_delay)
- rdev->last_off = ktime_get();
+ rdev->last_off = ktime_get_boottime();
trace_regulator_disable_complete(rdev_get_name(rdev));
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 823/885] panic: fix the panic_print NMI backtrace setting
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (821 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 822/885] regulator: core: Use ktime_get_boottime() to determine how long a regulator was off Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 824/885] mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON Greg Kroah-Hartman
` (64 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Guilherme G. Piccoli, Baoquan He,
Dave Young, Feng Tang, HATAYAMA Daisuke, Hidehiro Kawai,
Kees Cook, Michael Kelley, Petr Mladek, Vivek Goyal,
Andrew Morton
From: Guilherme G. Piccoli <gpiccoli@igalia.com>
commit b905039e428d639adeebb719b76f98865ea38d4d upstream.
Commit 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in
panic_print") introduced a setting for the "panic_print" kernel parameter
to allow users to request a NMI backtrace on panic. Problem is that the
panic_print handling happens after the secondary CPUs are already
disabled, hence this option ended-up being kind of a no-op - kernel skips
the NMI trace in idling CPUs, which is the case of offline CPUs.
Fix it by checking the NMI backtrace bit in the panic_print prior to the
CPU disabling function.
Link: https://lkml.kernel.org/r/20230226160838.414257-1-gpiccoli@igalia.com
Fixes: 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in panic_print")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: <stable@vger.kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/panic.c | 44 ++++++++++++++++++++++++++------------------
1 file changed, 26 insertions(+), 18 deletions(-)
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -211,9 +211,6 @@ static void panic_print_sys_info(bool co
return;
}
- if (panic_print & PANIC_PRINT_ALL_CPU_BT)
- trigger_all_cpu_backtrace();
-
if (panic_print & PANIC_PRINT_TASK_INFO)
show_state();
@@ -243,6 +240,30 @@ void check_panic_on_warn(const char *ori
origin, limit);
}
+/*
+ * Helper that triggers the NMI backtrace (if set in panic_print)
+ * and then performs the secondary CPUs shutdown - we cannot have
+ * the NMI backtrace after the CPUs are off!
+ */
+static void panic_other_cpus_shutdown(bool crash_kexec)
+{
+ if (panic_print & PANIC_PRINT_ALL_CPU_BT)
+ trigger_all_cpu_backtrace();
+
+ /*
+ * Note that smp_send_stop() is the usual SMP shutdown function,
+ * which unfortunately may not be hardened to work in a panic
+ * situation. If we want to do crash dump after notifier calls
+ * and kmsg_dump, we will need architecture dependent extra
+ * bits in addition to stopping other CPUs, hence we rely on
+ * crash_smp_send_stop() for that.
+ */
+ if (!crash_kexec)
+ smp_send_stop();
+ else
+ crash_smp_send_stop();
+}
+
/**
* panic - halt the system
* @fmt: The text string to print
@@ -333,23 +354,10 @@ void panic(const char *fmt, ...)
*
* Bypass the panic_cpu check and call __crash_kexec directly.
*/
- if (!_crash_kexec_post_notifiers) {
+ if (!_crash_kexec_post_notifiers)
__crash_kexec(NULL);
- /*
- * Note smp_send_stop is the usual smp shutdown function, which
- * unfortunately means it may not be hardened to work in a
- * panic situation.
- */
- smp_send_stop();
- } else {
- /*
- * If we want to do crash dump after notifier calls and
- * kmsg_dump, we will need architecture dependent extra
- * works in addition to stopping other CPUs.
- */
- crash_smp_send_stop();
- }
+ panic_other_cpus_shutdown(_crash_kexec_post_notifiers);
/*
* Run any panic handlers, including those that might need to
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 824/885] mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (822 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 823/885] panic: fix the panic_print NMI backtrace setting Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 825/885] alpha: fix FEN fault handling Greg Kroah-Hartman
` (63 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Naoya Horiguchi, David Hildenbrand,
Hugh Dickins, Matthew Wilcox, Miaohe Lin, Minchan Kim,
Vlastimil Babka, Andrew Morton
From: Naoya Horiguchi <naoya.horiguchi@nec.com>
commit 6da6b1d4a7df8c35770186b53ef65d388398e139 upstream.
After a memory error happens on a clean folio, a process unexpectedly
receives SIGBUS when it accesses the error page. This SIGBUS killing is
pointless and simply degrades the level of RAS of the system, because the
clean folio can be dropped without any data lost on memory error handling
as we do for a clean pagecache.
When memory_failure() is called on a clean folio, try_to_unmap() is called
twice (one from split_huge_page() and one from hwpoison_user_mappings()).
The root cause of the issue is that pte conversion to hwpoisoned entry is
now done in the first call of try_to_unmap() because PageHWPoison is
already set at this point, while it's actually expected to be done in the
second call. This behavior disturbs the error handling operation like
removing pagecache, which results in the malfunction described above.
So convert TTU_IGNORE_HWPOISON into TTU_HWPOISON and set TTU_HWPOISON only
when we really intend to convert pte to hwpoison entry. This can prevent
other callers of try_to_unmap() from accidentally converting to hwpoison
entries.
Link: https://lkml.kernel.org/r/20230221085905.1465385-1-naoya.horiguchi@linux.dev
Fixes: a42634a6c07d ("readahead: Use a folio in read_pages()")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/rmap.h | 2 +-
mm/memory-failure.c | 8 ++++----
mm/rmap.c | 2 +-
3 files changed, 6 insertions(+), 6 deletions(-)
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -94,7 +94,7 @@ enum ttu_flags {
TTU_SPLIT_HUGE_PMD = 0x4, /* split huge PMD if any */
TTU_IGNORE_MLOCK = 0x8, /* ignore mlock */
TTU_SYNC = 0x10, /* avoid racy checks with PVMW_SYNC */
- TTU_IGNORE_HWPOISON = 0x20, /* corrupted page is recoverable */
+ TTU_HWPOISON = 0x20, /* do convert pte to hwpoison entry */
TTU_BATCH_FLUSH = 0x40, /* Batch TLB flushes where possible
* and caller guarantees they will
* do a final flush if necessary */
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1020,7 +1020,7 @@ static int me_pagecache_dirty(struct pag
* cache and swap cache(ie. page is freshly swapped in). So it could be
* referenced concurrently by 2 types of PTEs:
* normal PTEs and swap PTEs. We try to handle them consistently by calling
- * try_to_unmap(TTU_IGNORE_HWPOISON) to convert the normal PTEs to swap PTEs,
+ * try_to_unmap(!TTU_HWPOISON) to convert the normal PTEs to swap PTEs,
* and then
* - clear dirty bit to prevent IO
* - remove from LRU
@@ -1401,7 +1401,7 @@ static bool hwpoison_user_mappings(struc
int flags, struct page *hpage)
{
struct folio *folio = page_folio(hpage);
- enum ttu_flags ttu = TTU_IGNORE_MLOCK | TTU_SYNC;
+ enum ttu_flags ttu = TTU_IGNORE_MLOCK | TTU_SYNC | TTU_HWPOISON;
struct address_space *mapping;
LIST_HEAD(tokill);
bool unmap_success;
@@ -1431,7 +1431,7 @@ static bool hwpoison_user_mappings(struc
if (PageSwapCache(p)) {
pr_err("%#lx: keeping poisoned page in swap cache\n", pfn);
- ttu |= TTU_IGNORE_HWPOISON;
+ ttu &= ~TTU_HWPOISON;
}
/*
@@ -1446,7 +1446,7 @@ static bool hwpoison_user_mappings(struc
if (page_mkclean(hpage)) {
SetPageDirty(hpage);
} else {
- ttu |= TTU_IGNORE_HWPOISON;
+ ttu &= ~TTU_HWPOISON;
pr_info("%#lx: corrupted page was clean: dropped without side effects\n",
pfn);
}
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1623,7 +1623,7 @@ static bool try_to_unmap_one(struct foli
/* Update high watermark before we lower rss */
update_hiwater_rss(mm);
- if (PageHWPoison(subpage) && !(flags & TTU_IGNORE_HWPOISON)) {
+ if (PageHWPoison(subpage) && (flags & TTU_HWPOISON)) {
pteval = swp_entry_to_pte(make_hwpoison_entry(subpage));
if (folio_test_hugetlb(folio)) {
hugetlb_count_sub(folio_nr_pages(folio), mm);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 825/885] alpha: fix FEN fault handling
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (823 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 824/885] mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 826/885] dax/kmem: Fix leak of memory-hotplug resources Greg Kroah-Hartman
` (62 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Richard Henderson, Al Viro
From: Al Viro <viro@zeniv.linux.org.uk>
commit 977a3009547dad4a5bc95d91be4a58c9f7eedac0 upstream.
Type 3 instruction fault (FPU insn with FPU disabled) is handled
by quietly enabling FPU and returning. Which is fine, except that
we need to do that both for fault in userland and in the kernel;
the latter *can* legitimately happen - all it takes is this:
.global _start
_start:
call_pal 0xae
lda $0, 0
ldq $0, 0($0)
- call_pal CLRFEN to clear "FPU enabled" flag and arrange for
a signal delivery (SIGSEGV in this case).
Fixed by moving the handling of type 3 into the common part of
do_entIF(), before we check for kernel vs. user mode.
Incidentally, the check for kernel mode is unidiomatic; the normal
way to do that is !user_mode(regs). The difference is that
the open-coded variant treats any of bits 63..3 of regs->ps being
set as "it's user mode" while the normal approach is to check just
the bit 3. PS is a 4-bit register and regs->ps always will have
bits 63..4 clear, so the open-coded variant here is actually equivalent
to !user_mode(regs). Harder to follow, though...
Cc: stable@vger.kernel.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/alpha/kernel/traps.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -233,7 +233,21 @@ do_entIF(unsigned long type, struct pt_r
{
int signo, code;
- if ((regs->ps & ~IPL_MAX) == 0) {
+ if (type == 3) { /* FEN fault */
+ /* Irritating users can call PAL_clrfen to disable the
+ FPU for the process. The kernel will then trap in
+ do_switch_stack and undo_switch_stack when we try
+ to save and restore the FP registers.
+
+ Given that GCC by default generates code that uses the
+ FP registers, PAL_clrfen is not useful except for DoS
+ attacks. So turn the bleeding FPU back on and be done
+ with it. */
+ current_thread_info()->pcb.flags |= 1;
+ __reload_thread(¤t_thread_info()->pcb);
+ return;
+ }
+ if (!user_mode(regs)) {
if (type == 1) {
const unsigned int *data
= (const unsigned int *) regs->pc;
@@ -366,20 +380,6 @@ do_entIF(unsigned long type, struct pt_r
}
break;
- case 3: /* FEN fault */
- /* Irritating users can call PAL_clrfen to disable the
- FPU for the process. The kernel will then trap in
- do_switch_stack and undo_switch_stack when we try
- to save and restore the FP registers.
-
- Given that GCC by default generates code that uses the
- FP registers, PAL_clrfen is not useful except for DoS
- attacks. So turn the bleeding FPU back on and be done
- with it. */
- current_thread_info()->pcb.flags |= 1;
- __reload_thread(¤t_thread_info()->pcb);
- return;
-
case 5: /* illoc */
default: /* unexpected instruction-fault type */
;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 826/885] dax/kmem: Fix leak of memory-hotplug resources
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (824 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 825/885] alpha: fix FEN fault handling Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 827/885] mips: fix syscall_get_nr Greg Kroah-Hartman
` (61 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Oscar Salvador, David Hildenbrand,
Pavel Tatashin, Vishal Verma, Dave Jiang, Dan Williams
From: Dan Williams <dan.j.williams@intel.com>
commit e686c32590f40bffc45f105c04c836ffad3e531a upstream.
While experimenting with CXL region removal the following corruption of
/proc/iomem appeared.
Before:
f010000000-f04fffffff : CXL Window 0
f010000000-f02fffffff : region4
f010000000-f02fffffff : dax4.0
f010000000-f02fffffff : System RAM (kmem)
After (modprobe -r cxl_test):
f010000000-f02fffffff : **redacted binary garbage**
f010000000-f02fffffff : System RAM (kmem)
...and testing further the same is visible with persistent memory
assigned to kmem:
Before:
480000000-243fffffff : Persistent Memory
480000000-57e1fffff : namespace3.0
580000000-243fffffff : dax3.0
580000000-243fffffff : System RAM (kmem)
After (ndctl disable-region all):
480000000-243fffffff : Persistent Memory
580000000-243fffffff : ***redacted binary garbage***
580000000-243fffffff : System RAM (kmem)
The corrupted data is from a use-after-free of the "dax4.0" and "dax3.0"
resources, and it also shows that the "System RAM (kmem)" resource is
not being removed. The bug does not appear after "modprobe -r kmem", it
requires the parent of "dax4.0" and "dax3.0" to be removed which
re-parents the leaked "System RAM (kmem)" instances. Those in turn
reference the freed resource as a parent.
First up for the fix is release_mem_region_adjustable() needs to
reliably delete the resource inserted by add_memory_driver_managed().
That is thwarted by a check for IORESOURCE_SYSRAM that predates the
dax/kmem driver, from commit:
65c78784135f ("kernel, resource: check for IORESOURCE_SYSRAM in release_mem_region_adjustable")
That appears to be working around the behavior of HMM's
"MEMORY_DEVICE_PUBLIC" facility that has since been deleted. With that
check removed the "System RAM (kmem)" resource gets removed, but
corruption still occurs occasionally because the "dax" resource is not
reliably removed.
The dax range information is freed before the device is unregistered, so
the driver can not reliably recall (another use after free) what it is
meant to release. Lastly if that use after free got lucky, the driver
was covering up the leak of "System RAM (kmem)" due to its use of
release_resource() which detaches, but does not free, child resources.
The switch to remove_resource() forces remove_memory() to be responsible
for the deletion of the resource added by add_memory_driver_managed().
Fixes: c2f3011ee697 ("device-dax: add an allocation interface for device-dax instances")
Cc: <stable@vger.kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167653656244.3147810.5705900882794040229.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/dax/bus.c | 2 +-
drivers/dax/kmem.c | 4 ++--
kernel/resource.c | 14 --------------
3 files changed, 3 insertions(+), 17 deletions(-)
--- a/drivers/dax/bus.c
+++ b/drivers/dax/bus.c
@@ -427,8 +427,8 @@ static void unregister_dev_dax(void *dev
dev_dbg(dev, "%s\n", __func__);
kill_dev_dax(dev_dax);
- free_dev_dax_ranges(dev_dax);
device_del(dev);
+ free_dev_dax_ranges(dev_dax);
put_device(dev);
}
--- a/drivers/dax/kmem.c
+++ b/drivers/dax/kmem.c
@@ -146,7 +146,7 @@ static int dev_dax_kmem_probe(struct dev
if (rc) {
dev_warn(dev, "mapping%d: %#llx-%#llx memory add failed\n",
i, range.start, range.end);
- release_resource(res);
+ remove_resource(res);
kfree(res);
data->res[i] = NULL;
if (mapped)
@@ -195,7 +195,7 @@ static void dev_dax_kmem_remove(struct d
rc = remove_memory(range.start, range_len(&range));
if (rc == 0) {
- release_resource(data->res[i]);
+ remove_resource(data->res[i]);
kfree(data->res[i]);
data->res[i] = NULL;
success++;
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -1345,20 +1345,6 @@ retry:
continue;
}
- /*
- * All memory regions added from memory-hotplug path have the
- * flag IORESOURCE_SYSTEM_RAM. If the resource does not have
- * this flag, we know that we are dealing with a resource coming
- * from HMM/devm. HMM/devm use another mechanism to add/release
- * a resource. This goes via devm_request_mem_region and
- * devm_release_mem_region.
- * HMM/devm take care to release their resources when they want,
- * so if we are dealing with them, let us just back off here.
- */
- if (!(res->flags & IORESOURCE_SYSRAM)) {
- break;
- }
-
if (!(res->flags & IORESOURCE_MEM))
break;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 827/885] mips: fix syscall_get_nr
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (825 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 826/885] dax/kmem: Fix leak of memory-hotplug resources Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 828/885] media: ipu3-cio2: Fix PM runtime usage_count in driver unbind Greg Kroah-Hartman
` (60 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry V. Levin, Elvira Khabirova,
Thomas Bogendoerfer
From: Elvira Khabirova <lineprinter0@gmail.com>
commit 85cc91e2ba4262a602ec65e2b76c4391a9e60d3d upstream.
The implementation of syscall_get_nr on mips used to ignore the task
argument and return the syscall number of the calling thread instead of
the target thread.
The bug was exposed to user space by commit 201766a20e30f ("ptrace: add
PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite.
Link: https://github.com/strace/strace/issues/235
Fixes: c2d9f1775731 ("MIPS: Fix syscall_get_nr for the syscall exit tracing.")
Cc: <stable@vger.kernel.org> # v3.19+
Co-developed-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Elvira Khabirova <lineprinter0@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/include/asm/syscall.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@@ -38,7 +38,7 @@ static inline bool mips_syscall_is_indir
static inline long syscall_get_nr(struct task_struct *task,
struct pt_regs *regs)
{
- return current_thread_info()->syscall;
+ return task_thread_info(task)->syscall;
}
static inline void mips_syscall_update_nr(struct task_struct *task,
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 828/885] media: ipu3-cio2: Fix PM runtime usage_count in driver unbind
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (826 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 827/885] mips: fix syscall_get_nr Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 829/885] remoteproc/mtk_scp: Move clk ops outside send_lock Greg Kroah-Hartman
` (59 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sakari Ailus, Bingbu Cao,
Mauro Carvalho Chehab
From: Sakari Ailus <sakari.ailus@linux.intel.com>
commit 909d3096ac99fa2289f9b8945a3eab2269947a0a upstream.
Get the PM runtime usage_count and forbid PM runtime at driver unbind. The
opposite is being done in probe() already.
Fixes: commit c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver")
Cc: stable@vger.kernel.org # for >= 4.16
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
@@ -1843,6 +1843,9 @@ static void cio2_pci_remove(struct pci_d
v4l2_device_unregister(&cio2->v4l2_dev);
media_device_cleanup(&cio2->media_dev);
mutex_destroy(&cio2->lock);
+
+ pm_runtime_forbid(&pci_dev->dev);
+ pm_runtime_get_noresume(&pci_dev->dev);
}
static int __maybe_unused cio2_runtime_suspend(struct device *dev)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 829/885] remoteproc/mtk_scp: Move clk ops outside send_lock
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (827 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 828/885] media: ipu3-cio2: Fix PM runtime usage_count in driver unbind Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 830/885] docs: gdbmacros: print newest record Greg Kroah-Hartman
` (58 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen-Yu Tsai,
AngeloGioacchino Del Regno, Mathieu Poirier
From: Chen-Yu Tsai <wenst@chromium.org>
commit e46ceea3148163166ef9b7bcac578e72dd30c064 upstream.
Clocks are properly reference counted and do not need to be inside the
lock range.
Right now this triggers a false-positive lockdep warning on MT8192 based
Chromebooks, through a combination of mtk-scp that has a cros-ec-rpmsg
sub-device, the (actual) cros-ec I2C adapter registration, I2C client
(not on cros-ec) probe doing i2c transfers and enabling clocks.
This is a false positive because the cros-ec-rpmsg under mtk-scp does
not have an I2C adapter, and also each I2C adapter and cros-ec instance
have their own mutex.
Move the clk operations outside of the send_lock range.
Fixes: 63c13d61eafe ("remoteproc/mediatek: add SCP support for mt8183")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230104083110.736377-1-wenst@chromium.org
[Fixed "Fixes:" tag line]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/remoteproc/mtk_scp_ipi.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
--- a/drivers/remoteproc/mtk_scp_ipi.c
+++ b/drivers/remoteproc/mtk_scp_ipi.c
@@ -164,21 +164,21 @@ int scp_ipi_send(struct mtk_scp *scp, u3
WARN_ON(len > sizeof(send_obj->share_buf)) || WARN_ON(!buf))
return -EINVAL;
- mutex_lock(&scp->send_lock);
-
ret = clk_prepare_enable(scp->clk);
if (ret) {
dev_err(scp->dev, "failed to enable clock\n");
- goto unlock_mutex;
+ return ret;
}
+ mutex_lock(&scp->send_lock);
+
/* Wait until SCP receives the last command */
timeout = jiffies + msecs_to_jiffies(2000);
do {
if (time_after(jiffies, timeout)) {
dev_err(scp->dev, "%s: IPI timeout!\n", __func__);
ret = -ETIMEDOUT;
- goto clock_disable;
+ goto unlock_mutex;
}
} while (readl(scp->reg_base + scp->data->host_to_scp_reg));
@@ -205,10 +205,9 @@ int scp_ipi_send(struct mtk_scp *scp, u3
ret = 0;
}
-clock_disable:
- clk_disable_unprepare(scp->clk);
unlock_mutex:
mutex_unlock(&scp->send_lock);
+ clk_disable_unprepare(scp->clk);
return ret;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 830/885] docs: gdbmacros: print newest record
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (828 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 829/885] remoteproc/mtk_scp: Move clk ops outside send_lock Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 831/885] mm: memcontrol: deprecate charge moving Greg Kroah-Hartman
` (57 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, John Ogness, Petr Mladek
From: John Ogness <john.ogness@linutronix.de>
commit f2e4cca2f670c8e52fbb551a295f2afc9aa2bd72 upstream.
@head_id points to the newest record, but the printing loop
exits when it increments to this value (before printing).
Exit the printing loop after the newest record has been printed.
The python-based function in scripts/gdb/linux/dmesg.py already
does this correctly.
Fixes: e60768311af8 ("scripts/gdb: update for lockless printk ringbuffer")
Cc: stable@vger.kernel.org
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221229134339.197627-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/admin-guide/kdump/gdbmacros.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/admin-guide/kdump/gdbmacros.txt
+++ b/Documentation/admin-guide/kdump/gdbmacros.txt
@@ -312,10 +312,10 @@ define dmesg
set var $prev_flags = $info->flags
end
- set var $id = ($id + 1) & $id_mask
if ($id == $end_id)
loop_break
end
+ set var $id = ($id + 1) & $id_mask
end
end
document dmesg
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 831/885] mm: memcontrol: deprecate charge moving
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (829 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 830/885] docs: gdbmacros: print newest record Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 832/885] mm/thp: check and bail out if page in deferred queue already Greg Kroah-Hartman
` (56 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Johannes Weiner, Shakeel Butt,
Hugh Dickins, Michal Hocko, Muchun Song, Roman Gushchin,
Andrew Morton
From: Johannes Weiner <hannes@cmpxchg.org>
commit da34a8484d162585e22ed8c1e4114aa2f60e3567 upstream.
Charge moving mode in cgroup1 allows memory to follow tasks as they
migrate between cgroups. This is, and always has been, a questionable
thing to do - for several reasons.
First, it's expensive. Pages need to be identified, locked and isolated
from various MM operations, and reassigned, one by one.
Second, it's unreliable. Once pages are charged to a cgroup, there isn't
always a clear owner task anymore. Cache isn't moved at all, for example.
Mapped memory is moved - but if trylocking or isolating a page fails,
it's arbitrarily left behind. Frequent moving between domains may leave a
task's memory scattered all over the place.
Third, it isn't really needed. Launcher tasks can kick off workload tasks
directly in their target cgroup. Using dedicated per-workload groups
allows fine-grained policy adjustments - no need to move tasks and their
physical pages between control domains. The feature was never
forward-ported to cgroup2, and it hasn't been missed.
Despite it being a niche usecase, the maintenance overhead of supporting
it is enormous. Because pages are moved while they are live and subject
to various MM operations, the synchronization rules are complicated.
There are lock_page_memcg() in MM and FS code, which non-cgroup people
don't understand. In some cases we've been able to shift code and cgroup
API calls around such that we can rely on native locking as much as
possible. But that's fragile, and sometimes we need to hold MM locks for
longer than we otherwise would (pte lock e.g.).
Mark the feature deprecated. Hopefully we can remove it soon.
And backport into -stable kernels so that people who develop against
earlier kernels are warned about this deprecation as early as possible.
[akpm@linux-foundation.org: fix memory.rst underlining]
Link: https://lkml.kernel.org/r/Y5COd+qXwk/S+n8N@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/admin-guide/cgroup-v1/memory.rst | 13 +++++++++++--
mm/memcontrol.c | 4 ++++
2 files changed, 15 insertions(+), 2 deletions(-)
--- a/Documentation/admin-guide/cgroup-v1/memory.rst
+++ b/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -86,6 +86,8 @@ Brief summary of control files.
memory.swappiness set/show swappiness parameter of vmscan
(See sysctl's vm.swappiness)
memory.move_charge_at_immigrate set/show controls of moving charges
+ This knob is deprecated and shouldn't be
+ used.
memory.oom_control set/show oom controls.
memory.numa_stat show the number of memory usage per numa
node
@@ -716,8 +718,15 @@ NOTE2:
It is recommended to set the soft limit always below the hard limit,
otherwise the hard limit will take precedence.
-8. Move charges at task migration
-=================================
+8. Move charges at task migration (DEPRECATED!)
+===============================================
+
+THIS IS DEPRECATED!
+
+It's expensive and unreliable! It's better practice to launch workload
+tasks directly from inside their target cgroup. Use dedicated workload
+cgroups to allow fine-grained policy adjustments without having to
+move physical pages between control domains.
Users can move charges associated with a task along with task migration, that
is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3910,6 +3910,10 @@ static int mem_cgroup_move_charge_write(
{
struct mem_cgroup *memcg = mem_cgroup_from_css(css);
+ pr_warn_once("Cgroup memory moving (move_charge_at_immigrate) is deprecated. "
+ "Please report your usecase to linux-mm@kvack.org if you "
+ "depend on this functionality.\n");
+
if (val & ~MOVE_MASK)
return -EINVAL;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 832/885] mm/thp: check and bail out if page in deferred queue already
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (830 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 831/885] mm: memcontrol: deprecate charge moving Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 833/885] ktest.pl: Give back console on Ctrt^C on monitor Greg Kroah-Hartman
` (55 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yin Fengwei, Nathan Chancellor,
David Rientjes, Huang, Ying, Feng Tang, Matthew Wilcox,
Rik van Riel, Xing Zhengjun, Yang Shi, Andrew Morton
From: Yin Fengwei <fengwei.yin@intel.com>
commit 81e506bec9be1eceaf5a2c654e28ba5176ef48d8 upstream.
Kernel build regression with LLVM was reported here:
https://lore.kernel.org/all/Y1GCYXGtEVZbcv%2F5@dev-arch.thelio-3990X/ with
commit f35b5d7d676e ("mm: align larger anonymous mappings on THP
boundaries"). And the commit f35b5d7d676e was reverted.
It turned out the regression is related with madvise(MADV_DONTNEED)
was used by ld.lld. But with none PMD_SIZE aligned parameter len.
trace-bpfcc captured:
531607 531732 ld.lld do_madvise.part.0 start: 0x7feca9000000, len: 0x7fb000, behavior: 0x4
531607 531793 ld.lld do_madvise.part.0 start: 0x7fec86a00000, len: 0x7fb000, behavior: 0x4
If the underneath physical page is THP, the madvise(MADV_DONTNEED) can
trigger split_queue_lock contention raised significantly. perf showed
following data:
14.85% 0.00% ld.lld [kernel.kallsyms] [k]
entry_SYSCALL_64_after_hwframe
11.52%
entry_SYSCALL_64_after_hwframe
do_syscall_64
__x64_sys_madvise
do_madvise.part.0
zap_page_range
unmap_single_vma
unmap_page_range
page_remove_rmap
deferred_split_huge_page
__lock_text_start
native_queued_spin_lock_slowpath
If THP can't be removed from rmap as whole THP, partial THP will be
removed from rmap by removing sub-pages from rmap. Even the THP head page
is added to deferred queue already, the split_queue_lock will be acquired
and check whether the THP head page is in the queue already. Thus, the
contention of split_queue_lock is raised.
Before acquire split_queue_lock, check and bail out early if the THP
head page is in the queue already. The checking without holding
split_queue_lock could race with deferred_split_scan, but it doesn't
impact the correctness here.
Test result of building kernel with ld.lld:
commit 7b5a0b664ebe (parent commit of f35b5d7d676e):
time -f "\t%E real,\t%U user,\t%S sys" make LD=ld.lld -skj96 allmodconfig all
6:07.99 real, 26367.77 user, 5063.35 sys
commit f35b5d7d676e:
time -f "\t%E real,\t%U user,\t%S sys" make LD=ld.lld -skj96 allmodconfig all
7:22.15 real, 26235.03 user, 12504.55 sys
commit f35b5d7d676e with the fixing patch:
time -f "\t%E real,\t%U user,\t%S sys" make LD=ld.lld -skj96 allmodconfig all
6:08.49 real, 26520.15 user, 5047.91 sys
Link: https://lkml.kernel.org/r/20221223135207.2275317-1-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/huge_memory.c | 3 +++
1 file changed, 3 insertions(+)
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2818,6 +2818,9 @@ void deferred_split_huge_page(struct pag
if (PageSwapCache(page))
return;
+ if (!list_empty(page_deferred_list(page)))
+ return;
+
spin_lock_irqsave(&ds_queue->split_queue_lock, flags);
if (list_empty(page_deferred_list(page))) {
count_vm_event(THP_DEFERRED_SPLIT_PAGE);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 833/885] ktest.pl: Give back console on Ctrt^C on monitor
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (831 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 832/885] mm/thp: check and bail out if page in deferred queue already Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 834/885] kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list Greg Kroah-Hartman
` (54 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Steven Rostedt
From: Steven Rostedt <rostedt@goodmis.org>
commit 83d29d439cd3ef23041570d55841f814af2ecac0 upstream.
When monitoring the console output, the stdout is being redirected to do
so. If Ctrl^C is hit during this mode, the stdout is not back to the
console, the user does not see anything they type (no echo).
Add "end_monitor" to the SIGINT interrupt handler to give back the console
on Ctrl^C.
Cc: stable@vger.kernel.org
Fixes: 9f2cdcbbb90e7 ("ktest: Give console process a dedicated tty")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/ktest/ktest.pl | 3 +++
1 file changed, 3 insertions(+)
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -4193,6 +4193,9 @@ sub send_email {
}
sub cancel_test {
+ if ($monitor_cnt) {
+ end_monitor;
+ }
if ($email_when_canceled) {
my $name = get_test_name;
send_email("KTEST: Your [$name] test was cancelled",
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 834/885] kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (832 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 833/885] ktest.pl: Give back console on Ctrt^C on monitor Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 835/885] ktest.pl: Fix missing "end_monitor" when machine check fails Greg Kroah-Hartman
` (53 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pengfei Xu,
Masami Hiramatsu (Google), Steven Rostedt (Google)
From: Masami Hiramatsu (Google) <mhiramat@kernel.org>
commit 4fbd2f83fda0ca44a2ec6421ca3508b355b31858 upstream.
Since forcibly unoptimized kprobes will be put on the freeing_list directly
in the unoptimize_kprobe(), do_unoptimize_kprobes() must continue to check
the freeing_list even if unoptimizing_list is empty.
This bug can happen if a kprobe is put in an instruction which is in the
middle of the jump-replaced instruction sequence of an optprobe, *and* the
optprobe is recently unregistered and queued on unoptimizing_list.
In this case, the optprobe will be unoptimized forcibly (means immediately)
and put it into the freeing_list, expecting the optprobe will be handled in
do_unoptimize_kprobe().
But if there is no other optprobes on the unoptimizing_list, current code
returns from the do_unoptimize_kprobe() soon and does not handle the
optprobe which is on the freeing_list. Then the optprobe will hit the
WARN_ON_ONCE() in the do_free_cleaned_kprobes(), because it is not handled
in the latter loop of the do_unoptimize_kprobe().
To solve this issue, do not return from do_unoptimize_kprobes() immediately
even if unoptimizing_list is empty.
Moreover, this change affects another case. kill_optimized_kprobes() expects
kprobe_optimizer() will just free the optprobe on freeing_list.
So I changed it to just do list_move() to freeing_list if optprobes are on
unoptimizing list. And the do_unoptimize_kprobe() will skip
arch_disarm_kprobe() if the probe on freeing_list has gone flag.
Link: https://lore.kernel.org/all/Y8URdIfVr3pq2X8w@xpf.sh.intel.com/
Link: https://lore.kernel.org/all/167448024501.3253718.13037333683110512967.stgit@devnote3/
Fixes: e4add247789e ("kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/kprobes.c | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -555,17 +555,15 @@ static void do_unoptimize_kprobes(void)
/* See comment in do_optimize_kprobes() */
lockdep_assert_cpus_held();
- /* Unoptimization must be done anytime */
- if (list_empty(&unoptimizing_list))
- return;
+ if (!list_empty(&unoptimizing_list))
+ arch_unoptimize_kprobes(&unoptimizing_list, &freeing_list);
- arch_unoptimize_kprobes(&unoptimizing_list, &freeing_list);
- /* Loop on 'freeing_list' for disarming */
+ /* Loop on 'freeing_list' for disarming and removing from kprobe hash list */
list_for_each_entry_safe(op, tmp, &freeing_list, list) {
/* Switching from detour code to origin */
op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED;
- /* Disarm probes if marked disabled */
- if (kprobe_disabled(&op->kp))
+ /* Disarm probes if marked disabled and not gone */
+ if (kprobe_disabled(&op->kp) && !kprobe_gone(&op->kp))
arch_disarm_kprobe(&op->kp);
if (kprobe_unused(&op->kp)) {
/*
@@ -797,14 +795,13 @@ static void kill_optimized_kprobe(struct
op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED;
if (kprobe_unused(p)) {
- /* Enqueue if it is unused */
- list_add(&op->list, &freeing_list);
/*
- * Remove unused probes from the hash list. After waiting
- * for synchronization, this probe is reclaimed.
- * (reclaiming is done by do_free_cleaned_kprobes().)
+ * Unused kprobe is on unoptimizing or freeing list. We move it
+ * to freeing_list and let the kprobe_optimizer() remove it from
+ * the kprobe hash list and free it.
*/
- hlist_del_rcu(&op->kp.hlist);
+ if (optprobe_queued_unopt(op))
+ list_move(&op->list, &freeing_list);
}
/* Don't touch the code, because it is already freed. */
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 835/885] ktest.pl: Fix missing "end_monitor" when machine check fails
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (833 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 834/885] kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 836/885] ktest.pl: Add RUN_TIMEOUT option with default unlimited Greg Kroah-Hartman
` (52 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Steven Rostedt
From: Steven Rostedt <rostedt@goodmis.org>
commit e8bf9b98d40dbdf4e39362e3b85a70c61da68cb7 upstream.
In the "reboot" command, it does a check of the machine to see if it is
still alive with a simple "ssh echo" command. If it fails, it will assume
that a normal "ssh reboot" is not possible and force a power cycle.
In this case, the "start_monitor" is executed, but the "end_monitor" is
not, and this causes the screen will not be given back to the console. That
is, after the test, a "reset" command needs to be performed, as "echo" is
turned off.
Cc: stable@vger.kernel.org
Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/ktest/ktest.pl | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -1488,7 +1488,8 @@ sub reboot {
# Still need to wait for the reboot to finish
wait_for_monitor($time, $reboot_success_line);
-
+ }
+ if ($powercycle || $time) {
end_monitor;
}
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 836/885] ktest.pl: Add RUN_TIMEOUT option with default unlimited
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (834 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 835/885] ktest.pl: Fix missing "end_monitor" when machine check fails Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 837/885] memory tier: release the new_memtier in find_create_memory_tier() Greg Kroah-Hartman
` (51 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Steven Rostedt
From: Steven Rostedt <rostedt@goodmis.org>
commit 4e7d2a8f0b52abf23b1dc13b3d88bc0923383cd5 upstream.
There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.
Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".
But this fixes the hang that happens when the pipe is full and the ssh
session never exits.
Cc: stable@vger.kernel.org
Fixes: 6e98d1b4415fe ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/ktest/ktest.pl | 20 ++++++++++++++++----
tools/testing/ktest/sample.conf | 5 +++++
2 files changed, 21 insertions(+), 4 deletions(-)
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -178,6 +178,7 @@ my $store_failures;
my $store_successes;
my $test_name;
my $timeout;
+my $run_timeout;
my $connect_timeout;
my $config_bisect_exec;
my $booted_timeout;
@@ -340,6 +341,7 @@ my %option_map = (
"STORE_SUCCESSES" => \$store_successes,
"TEST_NAME" => \$test_name,
"TIMEOUT" => \$timeout,
+ "RUN_TIMEOUT" => \$run_timeout,
"CONNECT_TIMEOUT" => \$connect_timeout,
"CONFIG_BISECT_EXEC" => \$config_bisect_exec,
"BOOTED_TIMEOUT" => \$booted_timeout,
@@ -1851,6 +1853,14 @@ sub run_command {
$command =~ s/\$SSH_USER/$ssh_user/g;
$command =~ s/\$MACHINE/$machine/g;
+ if (!defined($timeout)) {
+ $timeout = $run_timeout;
+ }
+
+ if (!defined($timeout)) {
+ $timeout = -1; # tell wait_for_input to wait indefinitely
+ }
+
doprint("$command ... ");
$start_time = time;
@@ -1877,13 +1887,10 @@ sub run_command {
while (1) {
my $fp = \*CMD;
- if (defined($timeout)) {
- doprint "timeout = $timeout\n";
- }
my $line = wait_for_input($fp, $timeout);
if (!defined($line)) {
my $now = time;
- if (defined($timeout) && (($now - $start_time) >= $timeout)) {
+ if ($timeout >= 0 && (($now - $start_time) >= $timeout)) {
doprint "Hit timeout of $timeout, killing process\n";
$hit_timeout = 1;
kill 9, $pid;
@@ -2055,6 +2062,11 @@ sub wait_for_input {
$time = $timeout;
}
+ if ($time < 0) {
+ # Negative number means wait indefinitely
+ undef $time;
+ }
+
$rin = '';
vec($rin, fileno($fp), 1) = 1;
vec($rin, fileno(\*STDIN), 1) = 1;
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -809,6 +809,11 @@
# is issued instead of a reboot.
# CONNECT_TIMEOUT = 25
+# The timeout in seconds for how long to wait for any running command
+# to timeout. If not defined, it will let it go indefinitely.
+# (default undefined)
+#RUN_TIMEOUT = 600
+
# In between tests, a reboot of the box may occur, and this
# is the time to wait for the console after it stops producing
# output. Some machines may not produce a large lag on reboot
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 837/885] memory tier: release the new_memtier in find_create_memory_tier()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (835 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 836/885] ktest.pl: Add RUN_TIMEOUT option with default unlimited Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 838/885] ring-buffer: Handle race between rb_move_tail and rb_check_pages Greg Kroah-Hartman
` (50 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Tong Tiangen, Aneesh Kumar K.V,
Hanjun Guo, Kefeng Wang, Andrew Morton
From: Tong Tiangen <tongtiangen@huawei.com>
commit 93419139fa14124c1c507d804f2b28866ebee28d upstream.
In find_create_memory_tier(), if failed to register device, then we should
release new_memtier from the tier list and put device instead of memtier.
Link: https://lkml.kernel.org/r/20230129040651.1329208-1-tongtiangen@huawei.com
Fixes: 9832fb87834e ("mm/demotion: expose memory tier details via sysfs")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Guohanjun <guohanjun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/memory-tiers.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/mm/memory-tiers.c b/mm/memory-tiers.c
index c734658c6242..e593e56e530b 100644
--- a/mm/memory-tiers.c
+++ b/mm/memory-tiers.c
@@ -211,8 +211,8 @@ static struct memory_tier *find_create_memory_tier(struct memory_dev_type *memty
ret = device_register(&new_memtier->dev);
if (ret) {
- list_del(&memtier->list);
- put_device(&memtier->dev);
+ list_del(&new_memtier->list);
+ put_device(&new_memtier->dev);
return ERR_PTR(ret);
}
memtier = new_memtier;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 838/885] ring-buffer: Handle race between rb_move_tail and rb_check_pages
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (836 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 837/885] memory tier: release the new_memtier in find_create_memory_tier() Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 839/885] tools/bootconfig: fix single & used for logical condition Greg Kroah-Hartman
` (49 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, mhiramat, Zheng Yejian, Mukesh Ojha,
Steven Rostedt (Google)
From: Mukesh Ojha <quic_mojha@quicinc.com>
commit 8843e06f67b14f71c044bf6267b2387784c7e198 upstream.
It seems a data race between ring_buffer writing and integrity check.
That is, RB_FLAG of head_page is been updating, while at same time
RB_FLAG was cleared when doing integrity check rb_check_pages():
rb_check_pages() rb_handle_head_page():
-------- --------
rb_head_page_deactivate()
rb_head_page_set_normal()
rb_head_page_activate()
We do intergrity test of the list to check if the list is corrupted and
it is still worth doing it. So, let's refactor rb_check_pages() such that
we no longer clear and set flag during the list sanity checking.
[1] and [2] are the test to reproduce and the crash report respectively.
1:
``` read_trace.sh
while true;
do
# the "trace" file is closed after read
head -1 /sys/kernel/tracing/trace > /dev/null
done
```
``` repro.sh
sysctl -w kernel.panic_on_warn=1
# function tracer will writing enough data into ring_buffer
echo function > /sys/kernel/tracing/current_tracer
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
```
2:
------------[ cut here ]------------
WARNING: CPU: 9 PID: 62 at kernel/trace/ring_buffer.c:2653
rb_move_tail+0x450/0x470
Modules linked in:
CPU: 9 PID: 62 Comm: ksoftirqd/9 Tainted: G W 6.2.0-rc6+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:rb_move_tail+0x450/0x470
Code: ff ff 4c 89 c8 f0 4d 0f b1 02 48 89 c2 48 83 e2 fc 49 39 d0 75 24
83 e0 03 83 f8 02 0f 84 e1 fb ff ff 48 8b 57 10 f0 ff 42 08 <0f> 0b 83
f8 02 0f 84 ce fb ff ff e9 db
RSP: 0018:ffffb5564089bd00 EFLAGS: 00000203
RAX: 0000000000000000 RBX: ffff9db385a2bf81 RCX: ffffb5564089bd18
RDX: ffff9db281110100 RSI: 0000000000000fe4 RDI: ffff9db380145400
RBP: ffff9db385a2bf80 R08: ffff9db385a2bfc0 R09: ffff9db385a2bfc2
R10: ffff9db385a6c000 R11: ffff9db385a2bf80 R12: 0000000000000000
R13: 00000000000003e8 R14: ffff9db281110100 R15: ffffffffbb006108
FS: 0000000000000000(0000) GS:ffff9db3bdcc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005602323024c8 CR3: 0000000022e0c000 CR4: 00000000000006e0
Call Trace:
<TASK>
ring_buffer_lock_reserve+0x136/0x360
? __do_softirq+0x287/0x2df
? __pfx_rcu_softirq_qs+0x10/0x10
trace_function+0x21/0x110
? __pfx_rcu_softirq_qs+0x10/0x10
? __do_softirq+0x287/0x2df
function_trace_call+0xf6/0x120
0xffffffffc038f097
? rcu_softirq_qs+0x5/0x140
rcu_softirq_qs+0x5/0x140
__do_softirq+0x287/0x2df
run_ksoftirqd+0x2a/0x30
smpboot_thread_fn+0x188/0x220
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0xe7/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
---[ end trace 0000000000000000 ]---
[ crash report and test reproducer credit goes to Zheng Yejian]
Link: https://lore.kernel.org/linux-trace-kernel/1676376403-16462-1-git-send-email-quic_mojha@quicinc.com
Cc: <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 1039221cc278 ("ring-buffer: Do not disable recording when there is an iterator")
Reported-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/ring_buffer.c | 42 ++++++++++--------------------------------
1 file changed, 10 insertions(+), 32 deletions(-)
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1581,19 +1581,6 @@ static int rb_check_bpage(struct ring_bu
}
/**
- * rb_check_list - make sure a pointer to a list has the last bits zero
- */
-static int rb_check_list(struct ring_buffer_per_cpu *cpu_buffer,
- struct list_head *list)
-{
- if (RB_WARN_ON(cpu_buffer, rb_list_head(list->prev) != list->prev))
- return 1;
- if (RB_WARN_ON(cpu_buffer, rb_list_head(list->next) != list->next))
- return 1;
- return 0;
-}
-
-/**
* rb_check_pages - integrity check of buffer pages
* @cpu_buffer: CPU buffer with pages to test
*
@@ -1602,36 +1589,27 @@ static int rb_check_list(struct ring_buf
*/
static int rb_check_pages(struct ring_buffer_per_cpu *cpu_buffer)
{
- struct list_head *head = cpu_buffer->pages;
- struct buffer_page *bpage, *tmp;
+ struct list_head *head = rb_list_head(cpu_buffer->pages);
+ struct list_head *tmp;
- /* Reset the head page if it exists */
- if (cpu_buffer->head_page)
- rb_set_head_page(cpu_buffer);
-
- rb_head_page_deactivate(cpu_buffer);
-
- if (RB_WARN_ON(cpu_buffer, head->next->prev != head))
- return -1;
- if (RB_WARN_ON(cpu_buffer, head->prev->next != head))
+ if (RB_WARN_ON(cpu_buffer,
+ rb_list_head(rb_list_head(head->next)->prev) != head))
return -1;
- if (rb_check_list(cpu_buffer, head))
+ if (RB_WARN_ON(cpu_buffer,
+ rb_list_head(rb_list_head(head->prev)->next) != head))
return -1;
- list_for_each_entry_safe(bpage, tmp, head, list) {
+ for (tmp = rb_list_head(head->next); tmp != head; tmp = rb_list_head(tmp->next)) {
if (RB_WARN_ON(cpu_buffer,
- bpage->list.next->prev != &bpage->list))
+ rb_list_head(rb_list_head(tmp->next)->prev) != tmp))
return -1;
+
if (RB_WARN_ON(cpu_buffer,
- bpage->list.prev->next != &bpage->list))
- return -1;
- if (rb_check_list(cpu_buffer, &bpage->list))
+ rb_list_head(rb_list_head(tmp->prev)->next) != tmp))
return -1;
}
- rb_head_page_activate(cpu_buffer);
-
return 0;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 839/885] tools/bootconfig: fix single & used for logical condition
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (837 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 838/885] ring-buffer: Handle race between rb_move_tail and rb_check_pages Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 840/885] tracing/eprobe: Fix to add filter on eprobe description in README file Greg Kroah-Hartman
` (48 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Antonio Alvarez Feijoo,
Masami Hiramatsu (Google)
From: Antonio Alvarez Feijoo <antonio.feijoo@suse.com>
commit cf8c59a3756b2735c409a9b3ac1e4ec556546a7a upstream.
A single & will create a background process and return true, so the grep
command will run even if the file checked in the first condition does not
exist.
Link: https://lore.kernel.org/all/20230112114215.17103-1-antonio.feijoo@suse.com/
Fixes: 1eaad3ac3f39 ("tools/bootconfig: Use per-group/all enable option in ftrace2bconf script")
Signed-off-by: Antonio Alvarez Feijoo <antonio.feijoo@suse.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/bootconfig/scripts/ftrace2bconf.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/bootconfig/scripts/ftrace2bconf.sh
+++ b/tools/bootconfig/scripts/ftrace2bconf.sh
@@ -93,7 +93,7 @@ referred_vars() {
}
event_is_enabled() { # enable-file
- test -f $1 & grep -q "1" $1
+ test -f $1 && grep -q "1" $1
}
per_event_options() { # event-dir
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 840/885] tracing/eprobe: Fix to add filter on eprobe description in README file
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (838 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 839/885] tools/bootconfig: fix single & used for logical condition Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 841/885] iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter Greg Kroah-Hartman
` (47 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Masami Hiramatsu (Google),
Steven Rostedt (Google)
From: Masami Hiramatsu (Google) <mhiramat@kernel.org>
commit 133921530c42960c07d25d12677f9e131a2b0cdf upstream.
Fix to add a description of the filter on eprobe in README file. This
is required to identify the kernel supports the filter on eprobe or not.
Link: https://lore.kernel.org/all/167309833728.640500.12232259238201433587.stgit@devnote3/
Fixes: 752be5c5c910 ("tracing/eprobe: Add eprobe filter support")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/trace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -5599,7 +5599,7 @@ static const char readme_msg[] =
#ifdef CONFIG_HIST_TRIGGERS
"\t s:[synthetic/]<event> <field> [<field>]\n"
#endif
- "\t e[:[<group>/][<event>]] <attached-group>.<attached-event> [<args>]\n"
+ "\t e[:[<group>/][<event>]] <attached-group>.<attached-event> [<args>] [if <filter>]\n"
"\t -:[<group>/][<event>]\n"
#ifdef CONFIG_KPROBE_EVENTS
"\t place: [<module>:]<symbol>[+<offset>]|<memaddr>\n"
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 841/885] iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (839 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 840/885] tracing/eprobe: Fix to add filter on eprobe description in README file Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 842/885] iommu/amd: Improve page fault error reporting Greg Kroah-Hartman
` (46 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ilia.Gavrilov, Kim Phillips, Joerg Roedel
From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
commit b6b26d86c61c441144c72f842f7469bb686e1211 upstream.
The 'acpiid' buffer in the parse_ivrs_acpihid function may overflow,
because the string specifier in the format string sscanf()
has no width limitation.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: ca3bf5d47cec ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20230202082719.1513849-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iommu/amd/init.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -3475,15 +3475,26 @@ found:
return 1;
}
+#define ACPIID_LEN (ACPIHID_UID_LEN + ACPIHID_HID_LEN)
+
static int __init parse_ivrs_acpihid(char *str)
{
u32 seg = 0, bus, dev, fn;
char *hid, *uid, *p, *addr;
- char acpiid[ACPIHID_UID_LEN + ACPIHID_HID_LEN] = {0};
+ char acpiid[ACPIID_LEN] = {0};
int i;
addr = strchr(str, '@');
if (!addr) {
+ addr = strchr(str, '=');
+ if (!addr)
+ goto not_found;
+
+ ++addr;
+
+ if (strlen(addr) > ACPIID_LEN)
+ goto not_found;
+
if (sscanf(str, "[%x:%x.%x]=%s", &bus, &dev, &fn, acpiid) == 4 ||
sscanf(str, "[%x:%x:%x.%x]=%s", &seg, &bus, &dev, &fn, acpiid) == 5) {
pr_warn("ivrs_acpihid%s option format deprecated; use ivrs_acpihid=%s@%04x:%02x:%02x.%d instead\n",
@@ -3496,6 +3507,9 @@ static int __init parse_ivrs_acpihid(cha
/* We have the '@', make it the terminator to get just the acpiid */
*addr++ = 0;
+ if (strlen(str) > ACPIID_LEN + 1)
+ goto not_found;
+
if (sscanf(str, "=%s", acpiid) != 1)
goto not_found;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 842/885] iommu/amd: Improve page fault error reporting
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (840 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 841/885] iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 843/885] scsi: aacraid: Allocate cmd_priv with scsicmd Greg Kroah-Hartman
` (45 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Matt Fagnani, Joerg Roedel,
Vasant Hegde, Joerg Roedel
From: Vasant Hegde <vasant.hegde@amd.com>
commit 996d120b4de2b0d6b592bd9fbbe6e244b81ab3cc upstream.
If IOMMU domain for device group is not setup properly then we may hit
IOMMU page fault. Current page fault handler assumes that domain is
always setup and it will hit NULL pointer derefence (see below sample log).
Lets check whether domain is setup or not and log appropriate message.
Sample log:
----------
amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6
BUG: kernel NULL pointer dereference, address: 0000000000000058
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ #89
Hardware name: xxx
RIP: 0010:report_iommu_fault+0x11/0x90
[...]
Call Trace:
<TASK>
amd_iommu_int_thread+0x60c/0x760
? __pfx_irq_thread_fn+0x10/0x10
irq_thread_fn+0x1f/0x60
irq_thread+0xea/0x1a0
? preempt_count_add+0x6a/0xa0
? __pfx_irq_thread_dtor+0x10/0x10
? __pfx_irq_thread+0x10/0x10
kthread+0xe9/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
Reported-by: Matt Fagnani <matt.fagnani@bell.net>
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865
Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/
Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com
Cc: stable@vger.kernel.org
[joro: Edit commit message]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iommu/amd/iommu.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/iommu/amd/iommu.c
+++ b/drivers/iommu/amd/iommu.c
@@ -558,6 +558,15 @@ static void amd_iommu_report_page_fault(
* prevent logging it.
*/
if (IS_IOMMU_MEM_TRANSACTION(flags)) {
+ /* Device not attached to domain properly */
+ if (dev_data->domain == NULL) {
+ pr_err_ratelimited("Event logged [Device not attached to domain properly]\n");
+ pr_err_ratelimited(" device=%04x:%02x:%02x.%x domain=0x%04x\n",
+ iommu->pci_seg->id, PCI_BUS_NUM(devid), PCI_SLOT(devid),
+ PCI_FUNC(devid), domain_id);
+ goto out;
+ }
+
if (!report_iommu_fault(&dev_data->domain->domain,
&pdev->dev, address,
IS_WRITE_REQUEST(flags) ?
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 843/885] scsi: aacraid: Allocate cmd_priv with scsicmd
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (841 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 842/885] iommu/amd: Improve page fault error reporting Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 844/885] scsi: core: Remove the /proc/scsi/${proc_name} directory earlier Greg Kroah-Hartman
` (44 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Bart Van Assche, Hannes Reinecke,
Himanshu Madhani, Adaptec OEM Raid Solutions,
James E.J. Bottomley, Martin K. Petersen, linux-scsi, Kees Cook,
Vegard Nossum
From: Kees Cook <keescook@chromium.org>
commit 7ab734fc759828707dae22fe48b1eb4dcf70beea upstream.
The aac_priv() helper assumes that the private cmd area immediately follows
struct scsi_cmnd. Allocate this space as part of scsicmd, else there is a
risk of heap overflow. Seen with GCC 13:
../drivers/scsi/aacraid/aachba.c: In function 'aac_probe_container':
../drivers/scsi/aacraid/aachba.c:841:26: warning: array subscript 16 is outside array bounds of 'void[392]' [-Warray-bounds=]
841 | status = cmd_priv->status;
| ^~
In file included from ../include/linux/resource_ext.h:11,
from ../include/linux/pci.h:40,
from ../drivers/scsi/aacraid/aachba.c:22:
In function 'kmalloc',
inlined from 'kzalloc' at ../include/linux/slab.h:720:9,
inlined from 'aac_probe_container' at ../drivers/scsi/aacraid/aachba.c:821:30:
../include/linux/slab.h:580:24: note: at offset 392 into object of size 392 allocated by 'kmalloc_trace'
580 | return kmalloc_trace(
| ^~~~~~~~~~~~~~
581 | kmalloc_caches[kmalloc_type(flags)][index],
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
582 | flags, size);
| ~~~~~~~~~~~~
Fixes: 76a3451b64c6 ("scsi: aacraid: Move the SCSI pointer to private command data")
Link: https://lore.kernel.org/r/20230128000409.never.976-kees@kernel.org
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/aacraid/aachba.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 4d4cb47b3846..24c049eff157 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -818,8 +818,8 @@ static void aac_probe_container_scsi_done(struct scsi_cmnd *scsi_cmnd)
int aac_probe_container(struct aac_dev *dev, int cid)
{
- struct scsi_cmnd *scsicmd = kzalloc(sizeof(*scsicmd), GFP_KERNEL);
- struct aac_cmd_priv *cmd_priv = aac_priv(scsicmd);
+ struct aac_cmd_priv *cmd_priv;
+ struct scsi_cmnd *scsicmd = kzalloc(sizeof(*scsicmd) + sizeof(*cmd_priv), GFP_KERNEL);
struct scsi_device *scsidev = kzalloc(sizeof(*scsidev), GFP_KERNEL);
int status;
@@ -838,6 +838,7 @@ int aac_probe_container(struct aac_dev *dev, int cid)
while (scsicmd->device == scsidev)
schedule();
kfree(scsidev);
+ cmd_priv = aac_priv(scsicmd);
status = cmd_priv->status;
kfree(scsicmd);
return status;
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 844/885] scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (842 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 843/885] scsi: aacraid: Allocate cmd_priv with scsicmd Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 845/885] scsi: qla2xxx: Fix link failure in NPIV environment Greg Kroah-Hartman
` (43 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alan Stern, Yi Zhang,
Bart Van Assche, Martin K. Petersen
From: Bart Van Assche <bvanassche@acm.org>
commit fc663711b94468f4e1427ebe289c9f05669699c9 upstream.
Remove the /proc/scsi/${proc_name} directory earlier to fix a race
condition between unloading and reloading kernel modules. This fixes a bug
introduced in 2009 by commit 77c019768f06 ("[SCSI] fix /proc memory leak in
the SCSI core").
Fix the following kernel warning:
proc_dir_entry 'scsi/scsi_debug' already registered
WARNING: CPU: 19 PID: 27986 at fs/proc/generic.c:376 proc_register+0x27d/0x2e0
Call Trace:
proc_mkdir+0xb5/0xe0
scsi_proc_hostdir_add+0xb5/0x170
scsi_host_alloc+0x683/0x6c0
sdebug_driver_probe+0x6b/0x2d0 [scsi_debug]
really_probe+0x159/0x540
__driver_probe_device+0xdc/0x230
driver_probe_device+0x4f/0x120
__device_attach_driver+0xef/0x180
bus_for_each_drv+0xe5/0x130
__device_attach+0x127/0x290
device_initial_probe+0x17/0x20
bus_probe_device+0x110/0x130
device_add+0x673/0xc80
device_register+0x1e/0x30
sdebug_add_host_helper+0x1a7/0x3b0 [scsi_debug]
scsi_debug_init+0x64f/0x1000 [scsi_debug]
do_one_initcall+0xd7/0x470
do_init_module+0xe7/0x330
load_module+0x122a/0x12c0
__do_sys_finit_module+0x124/0x1a0
__x64_sys_finit_module+0x46/0x50
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Link: https://lore.kernel.org/r/20230210205200.36973-3-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/hosts.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -181,6 +181,7 @@ void scsi_remove_host(struct Scsi_Host *
scsi_forget_host(shost);
mutex_unlock(&shost->scan_mutex);
scsi_proc_host_rm(shost);
+ scsi_proc_hostdir_rm(shost->hostt);
/*
* New SCSI devices cannot be attached anymore because of the SCSI host
@@ -340,6 +341,7 @@ static void scsi_host_dev_release(struct
struct Scsi_Host *shost = dev_to_shost(dev);
struct device *parent = dev->parent;
+ /* In case scsi_remove_host() has not been called. */
scsi_proc_hostdir_rm(shost->hostt);
/* Wait for functions invoked through call_rcu(&scmd->rcu, ...) */
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 845/885] scsi: qla2xxx: Fix link failure in NPIV environment
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (843 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 844/885] scsi: core: Remove the /proc/scsi/${proc_name} directory earlier Greg Kroah-Hartman
@ 2023-03-07 17:02 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 846/885] scsi: qla2xxx: Check if port is online before sending ELS Greg Kroah-Hartman
` (42 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:02 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Quinn Tran, Nilesh Javali,
Himanshu Madhani, Martin K. Petersen
From: Quinn Tran <qutran@marvell.com>
commit b1ae65c082f74536ec292b15766f2846f0238373 upstream.
User experienced symptoms of adapter failure in NPIV environment. NPIV
hosts were allowed to trigger chip reset back to back due to NPIV link
state being slow to come online.
Fix link failure in NPIV environment by removing NPIV host from directly
being able to perform chip reset.
kernel: qla2xxx [0000:04:00.1]-6009:261: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:262: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:281: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:285: Loop down - aborting ISP
Fixes: 0d6e61bc6a4f ("[SCSI] qla2xxx: Correct various NPIV issues.")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/qla2xxx/qla_os.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -7448,7 +7448,7 @@ qla2x00_timer(struct timer_list *t)
/* if the loop has been down for 4 minutes, reinit adapter */
if (atomic_dec_and_test(&vha->loop_down_timer) != 0) {
- if (!(vha->device_flags & DFLG_NO_CABLE)) {
+ if (!(vha->device_flags & DFLG_NO_CABLE) && !vha->vp_idx) {
ql_log(ql_log_warn, vha, 0x6009,
"Loop down - aborting ISP.\n");
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 846/885] scsi: qla2xxx: Check if port is online before sending ELS
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (844 preceding siblings ...)
2023-03-07 17:02 ` [PATCH 6.1 845/885] scsi: qla2xxx: Fix link failure in NPIV environment Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 847/885] scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests Greg Kroah-Hartman
` (41 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shreyas Deodhar, Nilesh Javali,
Himanshu Madhani, Martin K. Petersen
From: Shreyas Deodhar <sdeodhar@marvell.com>
commit 0c227dc22ca18856055983f27594feb2e0149965 upstream.
CT Ping and ELS cmds fail for NVMe targets. Check if port is online before
sending ELS instead of sending login.
Cc: stable@vger.kernel.org
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/qla2xxx/qla_bsg.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -278,8 +278,8 @@ qla2x00_process_els(struct bsg_job *bsg_
const char *type;
int req_sg_cnt, rsp_sg_cnt;
int rval = (DID_ERROR << 16);
- uint16_t nextlid = 0;
uint32_t els_cmd = 0;
+ int qla_port_allocated = 0;
if (bsg_request->msgcode == FC_BSG_RPT_ELS) {
rport = fc_bsg_to_rport(bsg_job);
@@ -329,9 +329,9 @@ qla2x00_process_els(struct bsg_job *bsg_
/* make sure the rport is logged in,
* if not perform fabric login
*/
- if (qla2x00_fabric_login(vha, fcport, &nextlid)) {
+ if (atomic_read(&fcport->state) != FCS_ONLINE) {
ql_dbg(ql_dbg_user, vha, 0x7003,
- "Failed to login port %06X for ELS passthru.\n",
+ "Port %06X is not online for ELS passthru.\n",
fcport->d_id.b24);
rval = -EIO;
goto done;
@@ -348,6 +348,7 @@ qla2x00_process_els(struct bsg_job *bsg_
goto done;
}
+ qla_port_allocated = 1;
/* Initialize all required fields of fcport */
fcport->vha = vha;
fcport->d_id.b.al_pa =
@@ -432,7 +433,7 @@ done_unmap_sg:
goto done_free_fcport;
done_free_fcport:
- if (bsg_request->msgcode != FC_BSG_RPT_ELS)
+ if (qla_port_allocated)
qla2x00_free_fcport(fcport);
done:
return rval;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 847/885] scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (845 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 846/885] scsi: qla2xxx: Check if port is online before sending ELS Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 848/885] scsi: qla2xxx: Remove unintended flag clearing Greg Kroah-Hartman
` (40 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arun Easi, Nilesh Javali,
Himanshu Madhani, Martin K. Petersen
From: Arun Easi <aeasi@marvell.com>
commit c75e6aef5039830cce5d4cf764dd204522f89e6b upstream.
The following message and call trace was seen with debug kernels:
DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map
error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as
single]
WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017
check_unmap+0xf42/0x1990
Call Trace:
debug_dma_unmap_page+0xc9/0x100
qla_nvme_ls_unmap+0x141/0x210 [qla2xxx]
Remove DMA mapping from the driver altogether, as it is already done by FC
layer. This prevents the warning.
Fixes: c85ab7d9e27a ("scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/qla2xxx/qla_nvme.c | 19 +------------------
1 file changed, 1 insertion(+), 18 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -170,18 +170,6 @@ out:
qla2xxx_rel_qpair_sp(sp->qpair, sp);
}
-static void qla_nvme_ls_unmap(struct srb *sp, struct nvmefc_ls_req *fd)
-{
- if (sp->flags & SRB_DMA_VALID) {
- struct srb_iocb *nvme = &sp->u.iocb_cmd;
- struct qla_hw_data *ha = sp->fcport->vha->hw;
-
- dma_unmap_single(&ha->pdev->dev, nvme->u.nvme.cmd_dma,
- fd->rqstlen, DMA_TO_DEVICE);
- sp->flags &= ~SRB_DMA_VALID;
- }
-}
-
static void qla_nvme_release_ls_cmd_kref(struct kref *kref)
{
struct srb *sp = container_of(kref, struct srb, cmd_kref);
@@ -199,7 +187,6 @@ static void qla_nvme_release_ls_cmd_kref
fd = priv->fd;
- qla_nvme_ls_unmap(sp, fd);
fd->done(fd, priv->comp_status);
out:
qla2x00_rel_sp(sp);
@@ -365,13 +352,10 @@ static int qla_nvme_ls_req(struct nvme_f
nvme->u.nvme.rsp_len = fd->rsplen;
nvme->u.nvme.rsp_dma = fd->rspdma;
nvme->u.nvme.timeout_sec = fd->timeout;
- nvme->u.nvme.cmd_dma = dma_map_single(&ha->pdev->dev, fd->rqstaddr,
- fd->rqstlen, DMA_TO_DEVICE);
+ nvme->u.nvme.cmd_dma = fd->rqstdma;
dma_sync_single_for_device(&ha->pdev->dev, nvme->u.nvme.cmd_dma,
fd->rqstlen, DMA_TO_DEVICE);
- sp->flags |= SRB_DMA_VALID;
-
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x700e,
@@ -379,7 +363,6 @@ static int qla_nvme_ls_req(struct nvme_f
wake_up(&sp->nvme_ls_waitq);
sp->priv = NULL;
priv->sp = NULL;
- qla_nvme_ls_unmap(sp, fd);
qla2x00_rel_sp(sp);
return rval;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 848/885] scsi: qla2xxx: Remove unintended flag clearing
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (846 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 847/885] scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 849/885] scsi: qla2xxx: Fix erroneous link down Greg Kroah-Hartman
` (39 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Quinn Tran, Nilesh Javali,
Himanshu Madhani, Martin K. Petersen
From: Quinn Tran <qutran@marvell.com>
commit 7e8a936a2d0f98dd6e5d05d4838affabe606cabc upstream.
FCF_ASYNC_SENT flag is used in session management. This flag is cleared in
task management path by accident. Remove unintended flag clearing.
Fixes: 388a49959ee4 ("scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/qla2xxx/qla_init.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2076,7 +2076,6 @@ qla2x00_async_tm_cmd(fc_port_t *fcport,
done_free_sp:
/* ref: INIT */
kref_put(&sp->cmd_kref, qla2x00_sp_release);
- fcport->flags &= ~FCF_ASYNC_SENT;
done:
return rval;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 849/885] scsi: qla2xxx: Fix erroneous link down
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (847 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 848/885] scsi: qla2xxx: Remove unintended flag clearing Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 850/885] scsi: qla2xxx: Remove increment of interface err cnt Greg Kroah-Hartman
` (38 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Quinn Tran, Nilesh Javali,
Himanshu Madhani, Martin K. Petersen
From: Quinn Tran <qutran@marvell.com>
commit 3fbc74feb642deb688cc97f76d40b7287ddd4cb1 upstream.
If after an adapter reset the appearance of link is not recovered, the
devices are not rediscovered. This is result of a race condition between
adapter reset (abort_isp) and the topology scan. During adapter reset, the
ABORT_ISP_ACTIVE flag is set. Topology scan usually occurred after adapter
reset. In this case, the topology scan came earlier than usual where it
ran into problem due to ABORT_ISP_ACTIVE flag was still set.
kernel: qla2xxx [0000:13:00.0]-1005:1: Cmd 0x6a aborted with timeout since ISP Abort is pending
kernel: qla2xxx [0000:13:00.0]-28a0:1: MBX_GET_PORT_NAME failed, No FL Port.
kernel: qla2xxx [0000:13:00.0]-286b:1: qla2x00_configure_loop: exiting normally. local port wwpn 51402ec0123d9a80 id 012300)
kernel: qla2xxx [0000:13:00.0]-8017:1: ADAPTER RESET SUCCEEDED nexus=1:0:15.
Allow adapter reset to complete before any scan can start.
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/qla2xxx/qla_os.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -7095,9 +7095,12 @@ qla2x00_do_dpc(void *data)
}
}
loop_resync_check:
- if (test_and_clear_bit(LOOP_RESYNC_NEEDED,
+ if (!qla2x00_reset_active(base_vha) &&
+ test_and_clear_bit(LOOP_RESYNC_NEEDED,
&base_vha->dpc_flags)) {
-
+ /*
+ * Allow abort_isp to complete before moving on to scanning.
+ */
ql_dbg(ql_dbg_dpc, base_vha, 0x400f,
"Loop resync scheduled.\n");
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 850/885] scsi: qla2xxx: Remove increment of interface err cnt
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (848 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 849/885] scsi: qla2xxx: Fix erroneous link down Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 851/885] scsi: ses: Dont attach if enclosure has no components Greg Kroah-Hartman
` (37 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Saurav Kashyap, Nilesh Javali,
Himanshu Madhani, Martin K. Petersen
From: Saurav Kashyap <skashyap@marvell.com>
commit d676a9e3d9efb7e93df460bcf4c445496c16314f upstream.
Residual underrun is not an interface error, hence no need to increment
that count.
Fixes: dbf1f53cfd23 ("scsi: qla2xxx: Implementation to get and manage host, target stats and initiator port")
Cc: stable@vger.kernel.org
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/qla2xxx/qla_isr.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -3363,8 +3363,6 @@ qla2x00_status_entry(scsi_qla_host_t *vh
"Dropped frame(s) detected (0x%x of 0x%x bytes).\n",
resid, scsi_bufflen(cp));
- vha->interface_err_cnt++;
-
res = DID_ERROR << 16 | lscsi_status;
goto check_scsi_status;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 851/885] scsi: ses: Dont attach if enclosure has no components
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (849 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 850/885] scsi: qla2xxx: Remove increment of interface err cnt Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 852/885] scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process() Greg Kroah-Hartman
` (36 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ding Hui, James Bottomley,
Martin K. Petersen
From: James Bottomley <jejb@linux.ibm.com>
commit 3fe97ff3d94934649abb0652028dd7296170c8d0 upstream.
An enclosure with no components can't usefully be operated by the driver
(since effectively it has nothing to manage), so report the problem and
don't attach. Not attaching also fixes an oops which could occur if the
driver tries to manage a zero component enclosure.
[mkp: Switched to KERN_WARNING since this scenario is common]
Link: https://lore.kernel.org/r/c5deac044ac409e32d9ad9968ce0dcbc996bfc7a.camel@linux.ibm.com
Cc: stable@vger.kernel.org
Reported-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/ses.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -704,6 +704,12 @@ static int ses_intf_add(struct device *c
type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE)
components += type_ptr[1];
}
+
+ if (components == 0) {
+ sdev_printk(KERN_WARNING, sdev, "enclosure has no enumerated components\n");
+ goto err_free;
+ }
+
ses_dev->page1 = buf;
ses_dev->page1_len = len;
buf = NULL;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 852/885] scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (850 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 851/885] scsi: ses: Dont attach if enclosure has no components Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 853/885] scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses Greg Kroah-Hartman
` (35 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Tomas Henzl, Martin K. Petersen
From: Tomas Henzl <thenzl@redhat.com>
commit 9b4f5028e493cb353a5c8f5c45073eeea0303abd upstream.
A fix for:
BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x949/0xe30 [ses]
Read of size 1 at addr ffff88a1b043a451 by task systemd-udevd/3271
Checking after (and before in next loop) addl_desc_ptr[1] is sufficient, we
expect the size to be sanitized before first access to addl_desc_ptr[1].
Make sure we don't walk beyond end of page.
Link: https://lore.kernel.org/r/20230202162451.15346-2-thenzl@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/ses.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -603,9 +603,11 @@ static void ses_enclosure_data_process(s
/* these elements are optional */
type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_TARGET_PORT ||
type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT ||
- type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS))
+ type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS)) {
addl_desc_ptr += addl_desc_ptr[1] + 2;
-
+ if (addl_desc_ptr + 1 >= ses_dev->page10 + ses_dev->page10_len)
+ addl_desc_ptr = NULL;
+ }
}
}
kfree(buf);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 853/885] scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (851 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 852/885] scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process() Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 854/885] scsi: ses: Fix possible desc_ptr " Greg Kroah-Hartman
` (34 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Tomas Henzl, Martin K. Petersen
From: Tomas Henzl <thenzl@redhat.com>
commit db95d4df71cb55506425b6e4a5f8d68e3a765b63 upstream.
Sanitize possible addl_desc_ptr out-of-bounds accesses in
ses_enclosure_data_process().
Link: https://lore.kernel.org/r/20230202162451.15346-3-thenzl@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/ses.c | 35 ++++++++++++++++++++++++++---------
1 file changed, 26 insertions(+), 9 deletions(-)
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -433,8 +433,8 @@ int ses_match_host(struct enclosure_devi
}
#endif /* 0 */
-static void ses_process_descriptor(struct enclosure_component *ecomp,
- unsigned char *desc)
+static int ses_process_descriptor(struct enclosure_component *ecomp,
+ unsigned char *desc, int max_desc_len)
{
int eip = desc[0] & 0x10;
int invalid = desc[0] & 0x80;
@@ -445,22 +445,32 @@ static void ses_process_descriptor(struc
unsigned char *d;
if (invalid)
- return;
+ return 0;
switch (proto) {
case SCSI_PROTOCOL_FCP:
if (eip) {
+ if (max_desc_len <= 7)
+ return 1;
d = desc + 4;
slot = d[3];
}
break;
case SCSI_PROTOCOL_SAS:
+
if (eip) {
+ if (max_desc_len <= 27)
+ return 1;
d = desc + 4;
slot = d[3];
d = desc + 8;
- } else
+ } else {
+ if (max_desc_len <= 23)
+ return 1;
d = desc + 4;
+ }
+
+
/* only take the phy0 addr */
addr = (u64)d[12] << 56 |
(u64)d[13] << 48 |
@@ -477,6 +487,8 @@ static void ses_process_descriptor(struc
}
ecomp->slot = slot;
scomp->addr = addr;
+
+ return 0;
}
struct efd {
@@ -549,7 +561,7 @@ static void ses_enclosure_data_process(s
/* skip past overall descriptor */
desc_ptr += len + 4;
}
- if (ses_dev->page10)
+ if (ses_dev->page10 && ses_dev->page10_len > 9)
addl_desc_ptr = ses_dev->page10 + 8;
type_ptr = ses_dev->page1_types;
components = 0;
@@ -557,6 +569,7 @@ static void ses_enclosure_data_process(s
for (j = 0; j < type_ptr[1]; j++) {
char *name = NULL;
struct enclosure_component *ecomp;
+ int max_desc_len;
if (desc_ptr) {
if (desc_ptr >= buf + page7_len) {
@@ -583,10 +596,14 @@ static void ses_enclosure_data_process(s
ecomp = &edev->component[components++];
if (!IS_ERR(ecomp)) {
- if (addl_desc_ptr)
- ses_process_descriptor(
- ecomp,
- addl_desc_ptr);
+ if (addl_desc_ptr) {
+ max_desc_len = ses_dev->page10_len -
+ (addl_desc_ptr - ses_dev->page10);
+ if (ses_process_descriptor(ecomp,
+ addl_desc_ptr,
+ max_desc_len))
+ addl_desc_ptr = NULL;
+ }
if (create)
enclosure_component_register(
ecomp);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 854/885] scsi: ses: Fix possible desc_ptr out-of-bounds accesses
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (852 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 853/885] scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 855/885] scsi: ses: Fix slab-out-of-bounds in ses_intf_remove() Greg Kroah-Hartman
` (33 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Tomas Henzl, Martin K. Petersen
From: Tomas Henzl <thenzl@redhat.com>
commit 801ab13d50cf3d26170ee073ea8bb4eececb76ab upstream.
Sanitize possible desc_ptr out-of-bounds accesses in
ses_enclosure_data_process().
Link: https://lore.kernel.org/r/20230202162451.15346-4-thenzl@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/ses.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -572,15 +572,19 @@ static void ses_enclosure_data_process(s
int max_desc_len;
if (desc_ptr) {
- if (desc_ptr >= buf + page7_len) {
+ if (desc_ptr + 3 >= buf + page7_len) {
desc_ptr = NULL;
} else {
len = (desc_ptr[2] << 8) + desc_ptr[3];
desc_ptr += 4;
- /* Add trailing zero - pushes into
- * reserved space */
- desc_ptr[len] = '\0';
- name = desc_ptr;
+ if (desc_ptr + len > buf + page7_len)
+ desc_ptr = NULL;
+ else {
+ /* Add trailing zero - pushes into
+ * reserved space */
+ desc_ptr[len] = '\0';
+ name = desc_ptr;
+ }
}
}
if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 855/885] scsi: ses: Fix slab-out-of-bounds in ses_intf_remove()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (853 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 854/885] scsi: ses: Fix possible desc_ptr " Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 856/885] RISC-V: add a spin_shadow_stack declaration Greg Kroah-Hartman
` (32 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Tomas Henzl, Martin K. Petersen
From: Tomas Henzl <thenzl@redhat.com>
commit 578797f0c8cbc2e3ec5fc0dab87087b4c7073686 upstream.
A fix for:
BUG: KASAN: slab-out-of-bounds in ses_intf_remove+0x23f/0x270 [ses]
Read of size 8 at addr ffff88a10d32e5d8 by task rmmod/12013
When edev->components is zero, accessing edev->component[0] members is
wrong.
Link: https://lore.kernel.org/r/20230202162451.15346-5-thenzl@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/ses.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -856,7 +856,8 @@ static void ses_intf_remove_enclosure(st
kfree(ses_dev->page2);
kfree(ses_dev);
- kfree(edev->component[0].scratch);
+ if (edev->components)
+ kfree(edev->component[0].scratch);
put_device(&edev->edev);
enclosure_unregister(edev);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 856/885] RISC-V: add a spin_shadow_stack declaration
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (854 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 855/885] scsi: ses: Fix slab-out-of-bounds in ses_intf_remove() Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 857/885] riscv: Avoid enabling interrupts in die() Greg Kroah-Hartman
` (31 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Conor Dooley, Guo Ren, Palmer Dabbelt
From: Conor Dooley <conor.dooley@microchip.com>
commit eb9be8310c58c166f9fae3b71c0ad9d6741b4897 upstream.
The patchwork automation reported a sparse complaint that
spin_shadow_stack was not declared and should be static:
../arch/riscv/kernel/traps.c:335:15: warning: symbol 'spin_shadow_stack' was not declared. Should it be static?
However, this is used in entry.S and therefore shouldn't be static.
The same applies to the shadow_stack that this pseudo spinlock is
trying to protect, so do like its charge and add a declaration to
thread_info.h
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 7e1864332fbc ("riscv: fix race when vmap stack overflow")
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230210185945.915806-1-conor@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/riscv/include/asm/thread_info.h | 1 +
1 file changed, 1 insertion(+)
--- a/arch/riscv/include/asm/thread_info.h
+++ b/arch/riscv/include/asm/thread_info.h
@@ -43,6 +43,7 @@
#ifndef __ASSEMBLY__
extern long shadow_stack[SHADOW_OVERFLOW_STACK_SIZE / sizeof(long)];
+extern unsigned long spin_shadow_stack;
#include <asm/processor.h>
#include <asm/csr.h>
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 857/885] riscv: Avoid enabling interrupts in die()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (855 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 856/885] RISC-V: add a spin_shadow_stack declaration Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 858/885] riscv: mm: fix regression due to update_mmu_cache change Greg Kroah-Hartman
` (30 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mattias Nissler,
Björn Töpel, Palmer Dabbelt
From: Mattias Nissler <mnissler@rivosinc.com>
commit 130aee3fd9981297ff9354e5d5609cd59aafbbea upstream.
While working on something else, I noticed that the kernel would start
accepting interrupts again after crashing in an interrupt handler. Since
the kernel is already in inconsistent state, enabling interrupts is
dangerous and opens up risk of kernel state deteriorating further.
Interrupts do get enabled via what looks like an unintended side effect of
spin_unlock_irq, so switch to the more cautious
spin_lock_irqsave/spin_unlock_irqrestore instead.
Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code")
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230215144828.3370316-1-mnissler@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/riscv/kernel/traps.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/riscv/kernel/traps.c
+++ b/arch/riscv/kernel/traps.c
@@ -34,10 +34,11 @@ void die(struct pt_regs *regs, const cha
static int die_counter;
int ret;
long cause;
+ unsigned long flags;
oops_enter();
- spin_lock_irq(&die_lock);
+ spin_lock_irqsave(&die_lock, flags);
console_verbose();
bust_spinlocks(1);
@@ -54,7 +55,7 @@ void die(struct pt_regs *regs, const cha
bust_spinlocks(0);
add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
- spin_unlock_irq(&die_lock);
+ spin_unlock_irqrestore(&die_lock, flags);
oops_exit();
if (in_interrupt())
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 858/885] riscv: mm: fix regression due to update_mmu_cache change
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (856 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 857/885] riscv: Avoid enabling interrupts in die() Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 859/885] riscv: jump_label: Fixup unaligned arch_static_branch function Greg Kroah-Hartman
` (29 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lad, Prabhakar, Sergey Matyukevich,
Conor Dooley, Palmer Dabbelt
From: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
commit b49f700668fff7565b945dce823def79bff59bb0 upstream.
This is a partial revert of the commit 4bd1d80efb5a ("riscv: mm: notify
remote harts about mmu cache updates"). Original commit included two
loosely related changes serving the same purpose of fixing stale TLB
entries causing user-space application crash:
- introduce deferred per-ASID TLB flush for CPUs not running the task
- switch to per-ASID TLB flush on all CPUs running the task in update_mmu_cache
According to report and discussion in [1], the second part caused a
regression on Renesas RZ/Five SoC. For now restore the old behavior
of the update_mmu_cache.
[1] https://lore.kernel.org/linux-riscv/20220829205219.283543-1-geomatsi@gmail.com/
Fixes: 4bd1d80efb5a ("riscv: mm: notify remote harts about mmu cache updates")
Reported-by: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Link: trailer, so that it can be parsed with git's trailer functionality?
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230129211818.686557-1-geomatsi@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/riscv/include/asm/pgtable.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -415,7 +415,7 @@ static inline void update_mmu_cache(stru
* Relying on flush_tlb_fix_spurious_fault would suffice, but
* the extra traps reduce performance. So, eagerly SFENCE.VMA.
*/
- flush_tlb_page(vma, address);
+ local_flush_tlb_page(address);
}
static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 859/885] riscv: jump_label: Fixup unaligned arch_static_branch function
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (857 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 858/885] riscv: mm: fix regression due to update_mmu_cache change Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 860/885] riscv, mm: Perform BPF exhandler fixup on page fault Greg Kroah-Hartman
` (28 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Greentime Hu, Andy Chiu, Guo Ren,
Palmer Dabbelt
From: Andy Chiu <andy.chiu@sifive.com>
commit 9ddfc3cd806081ce1f6c9c2f988cbb031f35d28f upstream.
Runtime code patching must be done at a naturally aligned address, or we
may execute on a partial instruction.
We have encountered problems traced back to static jump functions during
the test. We switched the tracer randomly for every 1~5 seconds on a
dual-core QEMU setup and found the kernel sucking at a static branch
where it jumps to itself.
The reason is that the static branch was 2-byte but not 4-byte aligned.
Then, the kernel would patch the instruction, either J or NOP, with two
half-word stores if the machine does not have efficient unaligned
accesses. Thus, moments exist where half of the NOP mixes with the other
half of the J when transitioning the branch. In our particular case, on
a little-endian machine, the upper half of the NOP was mixed with the
lower part of the J when enabling the branch, resulting in a jump that
jumped to itself. Conversely, it would result in a HINT instruction when
disabling the branch, but it might not be observable.
ARM64 does not have this problem since all instructions must be 4-byte
aligned.
Fixes: ebc00dde8a97 ("riscv: Add jump-label implementation")
Link: https://lore.kernel.org/linux-riscv/20220913094252.3555240-6-andy.chiu@sifive.com/
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230206090440.1255001-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/riscv/include/asm/jump_label.h | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/riscv/include/asm/jump_label.h
+++ b/arch/riscv/include/asm/jump_label.h
@@ -18,6 +18,7 @@ static __always_inline bool arch_static_
const bool branch)
{
asm_volatile_goto(
+ " .align 2 \n\t"
" .option push \n\t"
" .option norelax \n\t"
" .option norvc \n\t"
@@ -39,6 +40,7 @@ static __always_inline bool arch_static_
const bool branch)
{
asm_volatile_goto(
+ " .align 2 \n\t"
" .option push \n\t"
" .option norelax \n\t"
" .option norvc \n\t"
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 860/885] riscv, mm: Perform BPF exhandler fixup on page fault
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (858 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 859/885] riscv: jump_label: Fixup unaligned arch_static_branch function Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 861/885] riscv: ftrace: Remove wasted nops for !RISCV_ISA_C Greg Kroah-Hartman
` (27 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Björn Töpel, Palmer Dabbelt
From: Björn Töpel <bjorn@rivosinc.com>
commit 416721ff05fddc58ca531b6f069de250301de6e5 upstream.
Commit 21855cac82d3 ("riscv/mm: Prevent kernel module to access user
memory without uaccess routines") added early exits/deaths for page
faults stemming from accesses to user-space without using proper
uaccess routines (where sstatus.SUM is set).
Unfortunatly, this is too strict for some BPF programs, which relies
on BPF exhandler fixups. These BPF programs loads "BTF pointers". A
BTF pointers could either be a valid kernel pointer or NULL, but not a
userspace address.
Resolve the problem by calling the fixup handler in the early exit
path.
Fixes: 21855cac82d3 ("riscv/mm: Prevent kernel module to access user memory without uaccess routines")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230214162515.184827-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/riscv/mm/fault.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/arch/riscv/mm/fault.c
+++ b/arch/riscv/mm/fault.c
@@ -267,10 +267,12 @@ asmlinkage void do_page_fault(struct pt_
if (user_mode(regs))
flags |= FAULT_FLAG_USER;
- if (!user_mode(regs) && addr < TASK_SIZE &&
- unlikely(!(regs->status & SR_SUM)))
- die_kernel_fault("access to user memory without uaccess routines",
- addr, regs);
+ if (!user_mode(regs) && addr < TASK_SIZE && unlikely(!(regs->status & SR_SUM))) {
+ if (fixup_exception(regs))
+ return;
+
+ die_kernel_fault("access to user memory without uaccess routines", addr, regs);
+ }
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 861/885] riscv: ftrace: Remove wasted nops for !RISCV_ISA_C
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (859 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 860/885] riscv, mm: Perform BPF exhandler fixup on page fault Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 862/885] riscv: ftrace: Reduce the detour code size to half Greg Kroah-Hartman
` (26 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Guo Ren, Guo Ren, Palmer Dabbelt
From: Guo Ren <guoren@linux.alibaba.com>
commit 409c8fb20c66df7150e592747412438c04aeb11f upstream.
When CONFIG_RISCV_ISA_C=n, -fpatchable-function-entry=8 would generate
more nops than we expect. Because it treat nop opcode as 0x00000013
instead of 0x0001.
Dump of assembler code for function dw_pcie_free_msi:
0xffffffff806fce94 <+0>: sd ra,-8(sp)
0xffffffff806fce98 <+4>: auipc ra,0xff90f
0xffffffff806fce9c <+8>: jalr -684(ra) # 0xffffffff8000bbec
<ftrace_caller>
0xffffffff806fcea0 <+12>: ld ra,-8(sp)
0xffffffff806fcea4 <+16>: nop /* wasted */
0xffffffff806fcea8 <+20>: nop /* wasted */
0xffffffff806fceac <+24>: nop /* wasted */
0xffffffff806fceb0 <+28>: nop /* wasted */
0xffffffff806fceb4 <+0>: addi sp,sp,-48
0xffffffff806fceb8 <+4>: sd s0,32(sp)
0xffffffff806fcebc <+8>: sd s1,24(sp)
0xffffffff806fcec0 <+12>: sd s2,16(sp)
0xffffffff806fcec4 <+16>: sd s3,8(sp)
0xffffffff806fcec8 <+20>: sd ra,40(sp)
0xffffffff806fcecc <+24>: addi s0,sp,48
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230112090603.1295340-3-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/riscv/Makefile | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -11,7 +11,11 @@ LDFLAGS_vmlinux :=
ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
LDFLAGS_vmlinux := --no-relax
KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
+ifeq ($(CONFIG_RISCV_ISA_C),y)
CC_FLAGS_FTRACE := -fpatchable-function-entry=8
+else
+ CC_FLAGS_FTRACE := -fpatchable-function-entry=4
+endif
endif
ifeq ($(CONFIG_CMODEL_MEDLOW),y)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 862/885] riscv: ftrace: Reduce the detour code size to half
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (860 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 861/885] riscv: ftrace: Remove wasted nops for !RISCV_ISA_C Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 863/885] MIPS: DTS: CI20: fix otg power gpio Greg Kroah-Hartman
` (25 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Song Shuai, Guo Ren, Guo Ren,
Evgenii Shatokhin, Palmer Dabbelt
From: Guo Ren <guoren@linux.alibaba.com>
commit 6724a76cff85ee271bbbff42ac527e4643b2ec52 upstream.
Use a temporary register to reduce the size of detour code from 16 bytes to
8 bytes. The previous implementation is from 'commit afc76b8b8011 ("riscv:
Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNT")'.
Before the patch:
<func_prolog>:
0: REG_S ra, -SZREG(sp)
4: auipc ra, ?
8: jalr ?(ra)
12: REG_L ra, -SZREG(sp)
(func_boddy)
After the patch:
<func_prolog>:
0: auipc t0, ?
4: jalr t0, ?(t0)
(func_boddy)
This patch not just reduces the size of detour code, but also fixes an
important issue:
An Ftrace callback registered with FTRACE_OPS_FL_IPMODIFY flag can
actually change the instruction pointer, e.g. to "replace" the given
kernel function with a new one, which is needed for livepatching, etc.
In this case, the trampoline (ftrace_regs_caller) would not return to
<func_prolog+12> but would rather jump to the new function. So, "REG_L
ra, -SZREG(sp)" would not run and the original return address would not
be restored. The kernel is likely to hang or crash as a result.
This can be easily demonstrated if one tries to "replace", say,
cmdline_proc_show() with a new function with the same signature using
instruction_pointer_set(&fregs->regs, new_func_addr) in the Ftrace
callback.
Link: https://lore.kernel.org/linux-riscv/20221122075440.1165172-1-suagrfillet@gmail.com/
Link: https://lore.kernel.org/linux-riscv/d7d5730b-ebef-68e5-5046-e763e1ee6164@yadro.com/
Co-developed-by: Song Shuai <suagrfillet@gmail.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Evgenii Shatokhin <e.shatokhin@yadro.com>
Reviewed-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/r/20230112090603.1295340-4-guoren@kernel.org
Cc: stable@vger.kernel.org
Fixes: 10626c32e382 ("riscv/ftrace: Add basic support")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/riscv/Makefile | 4 +-
arch/riscv/include/asm/ftrace.h | 50 +++++++++++++++++++++++-------
arch/riscv/kernel/ftrace.c | 65 +++++++++++-----------------------------
arch/riscv/kernel/mcount-dyn.S | 42 +++++++++----------------
4 files changed, 75 insertions(+), 86 deletions(-)
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -12,9 +12,9 @@ ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
LDFLAGS_vmlinux := --no-relax
KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
ifeq ($(CONFIG_RISCV_ISA_C),y)
- CC_FLAGS_FTRACE := -fpatchable-function-entry=8
-else
CC_FLAGS_FTRACE := -fpatchable-function-entry=4
+else
+ CC_FLAGS_FTRACE := -fpatchable-function-entry=2
endif
endif
--- a/arch/riscv/include/asm/ftrace.h
+++ b/arch/riscv/include/asm/ftrace.h
@@ -42,6 +42,14 @@ struct dyn_arch_ftrace {
* 2) jalr: setting low-12 offset to ra, jump to ra, and set ra to
* return address (original pc + 4)
*
+ *<ftrace enable>:
+ * 0: auipc t0/ra, 0x?
+ * 4: jalr t0/ra, ?(t0/ra)
+ *
+ *<ftrace disable>:
+ * 0: nop
+ * 4: nop
+ *
* Dynamic ftrace generates probes to call sites, so we must deal with
* both auipc and jalr at the same time.
*/
@@ -52,25 +60,43 @@ struct dyn_arch_ftrace {
#define AUIPC_OFFSET_MASK (0xfffff000)
#define AUIPC_PAD (0x00001000)
#define JALR_SHIFT 20
-#define JALR_BASIC (0x000080e7)
-#define AUIPC_BASIC (0x00000097)
+#define JALR_RA (0x000080e7)
+#define AUIPC_RA (0x00000097)
+#define JALR_T0 (0x000282e7)
+#define AUIPC_T0 (0x00000297)
#define NOP4 (0x00000013)
-#define make_call(caller, callee, call) \
+#define to_jalr_t0(offset) \
+ (((offset & JALR_OFFSET_MASK) << JALR_SHIFT) | JALR_T0)
+
+#define to_auipc_t0(offset) \
+ ((offset & JALR_SIGN_MASK) ? \
+ (((offset & AUIPC_OFFSET_MASK) + AUIPC_PAD) | AUIPC_T0) : \
+ ((offset & AUIPC_OFFSET_MASK) | AUIPC_T0))
+
+#define make_call_t0(caller, callee, call) \
do { \
- call[0] = to_auipc_insn((unsigned int)((unsigned long)callee - \
- (unsigned long)caller)); \
- call[1] = to_jalr_insn((unsigned int)((unsigned long)callee - \
- (unsigned long)caller)); \
+ unsigned int offset = \
+ (unsigned long) callee - (unsigned long) caller; \
+ call[0] = to_auipc_t0(offset); \
+ call[1] = to_jalr_t0(offset); \
} while (0)
-#define to_jalr_insn(offset) \
- (((offset & JALR_OFFSET_MASK) << JALR_SHIFT) | JALR_BASIC)
+#define to_jalr_ra(offset) \
+ (((offset & JALR_OFFSET_MASK) << JALR_SHIFT) | JALR_RA)
-#define to_auipc_insn(offset) \
+#define to_auipc_ra(offset) \
((offset & JALR_SIGN_MASK) ? \
- (((offset & AUIPC_OFFSET_MASK) + AUIPC_PAD) | AUIPC_BASIC) : \
- ((offset & AUIPC_OFFSET_MASK) | AUIPC_BASIC))
+ (((offset & AUIPC_OFFSET_MASK) + AUIPC_PAD) | AUIPC_RA) : \
+ ((offset & AUIPC_OFFSET_MASK) | AUIPC_RA))
+
+#define make_call_ra(caller, callee, call) \
+do { \
+ unsigned int offset = \
+ (unsigned long) callee - (unsigned long) caller; \
+ call[0] = to_auipc_ra(offset); \
+ call[1] = to_jalr_ra(offset); \
+} while (0)
/*
* Let auipc+jalr be the basic *mcount unit*, so we make it 8 bytes here.
--- a/arch/riscv/kernel/ftrace.c
+++ b/arch/riscv/kernel/ftrace.c
@@ -55,12 +55,15 @@ static int ftrace_check_current_call(uns
}
static int __ftrace_modify_call(unsigned long hook_pos, unsigned long target,
- bool enable)
+ bool enable, bool ra)
{
unsigned int call[2];
unsigned int nops[2] = {NOP4, NOP4};
- make_call(hook_pos, target, call);
+ if (ra)
+ make_call_ra(hook_pos, target, call);
+ else
+ make_call_t0(hook_pos, target, call);
/* Replace the auipc-jalr pair at once. Return -EPERM on write error. */
if (patch_text_nosync
@@ -70,42 +73,13 @@ static int __ftrace_modify_call(unsigned
return 0;
}
-/*
- * Put 5 instructions with 16 bytes at the front of function within
- * patchable function entry nops' area.
- *
- * 0: REG_S ra, -SZREG(sp)
- * 1: auipc ra, 0x?
- * 2: jalr -?(ra)
- * 3: REG_L ra, -SZREG(sp)
- *
- * So the opcodes is:
- * 0: 0xfe113c23 (sd)/0xfe112e23 (sw)
- * 1: 0x???????? -> auipc
- * 2: 0x???????? -> jalr
- * 3: 0xff813083 (ld)/0xffc12083 (lw)
- */
-#if __riscv_xlen == 64
-#define INSN0 0xfe113c23
-#define INSN3 0xff813083
-#elif __riscv_xlen == 32
-#define INSN0 0xfe112e23
-#define INSN3 0xffc12083
-#endif
-
-#define FUNC_ENTRY_SIZE 16
-#define FUNC_ENTRY_JMP 4
-
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
- unsigned int call[4] = {INSN0, 0, 0, INSN3};
- unsigned long target = addr;
- unsigned long caller = rec->ip + FUNC_ENTRY_JMP;
+ unsigned int call[2];
- call[1] = to_auipc_insn((unsigned int)(target - caller));
- call[2] = to_jalr_insn((unsigned int)(target - caller));
+ make_call_t0(rec->ip, addr, call);
- if (patch_text_nosync((void *)rec->ip, call, FUNC_ENTRY_SIZE))
+ if (patch_text_nosync((void *)rec->ip, call, MCOUNT_INSN_SIZE))
return -EPERM;
return 0;
@@ -114,15 +88,14 @@ int ftrace_make_call(struct dyn_ftrace *
int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
unsigned long addr)
{
- unsigned int nops[4] = {NOP4, NOP4, NOP4, NOP4};
+ unsigned int nops[2] = {NOP4, NOP4};
- if (patch_text_nosync((void *)rec->ip, nops, FUNC_ENTRY_SIZE))
+ if (patch_text_nosync((void *)rec->ip, nops, MCOUNT_INSN_SIZE))
return -EPERM;
return 0;
}
-
/*
* This is called early on, and isn't wrapped by
* ftrace_arch_code_modify_{prepare,post_process}() and therefor doesn't hold
@@ -144,10 +117,10 @@ int ftrace_init_nop(struct module *mod,
int ftrace_update_ftrace_func(ftrace_func_t func)
{
int ret = __ftrace_modify_call((unsigned long)&ftrace_call,
- (unsigned long)func, true);
+ (unsigned long)func, true, true);
if (!ret) {
ret = __ftrace_modify_call((unsigned long)&ftrace_regs_call,
- (unsigned long)func, true);
+ (unsigned long)func, true, true);
}
return ret;
@@ -159,16 +132,16 @@ int ftrace_modify_call(struct dyn_ftrace
unsigned long addr)
{
unsigned int call[2];
- unsigned long caller = rec->ip + FUNC_ENTRY_JMP;
+ unsigned long caller = rec->ip;
int ret;
- make_call(caller, old_addr, call);
+ make_call_t0(caller, old_addr, call);
ret = ftrace_check_current_call(caller, call);
if (ret)
return ret;
- return __ftrace_modify_call(caller, addr, true);
+ return __ftrace_modify_call(caller, addr, true, false);
}
#endif
@@ -203,12 +176,12 @@ int ftrace_enable_ftrace_graph_caller(vo
int ret;
ret = __ftrace_modify_call((unsigned long)&ftrace_graph_call,
- (unsigned long)&prepare_ftrace_return, true);
+ (unsigned long)&prepare_ftrace_return, true, true);
if (ret)
return ret;
return __ftrace_modify_call((unsigned long)&ftrace_graph_regs_call,
- (unsigned long)&prepare_ftrace_return, true);
+ (unsigned long)&prepare_ftrace_return, true, true);
}
int ftrace_disable_ftrace_graph_caller(void)
@@ -216,12 +189,12 @@ int ftrace_disable_ftrace_graph_caller(v
int ret;
ret = __ftrace_modify_call((unsigned long)&ftrace_graph_call,
- (unsigned long)&prepare_ftrace_return, false);
+ (unsigned long)&prepare_ftrace_return, false, true);
if (ret)
return ret;
return __ftrace_modify_call((unsigned long)&ftrace_graph_regs_call,
- (unsigned long)&prepare_ftrace_return, false);
+ (unsigned long)&prepare_ftrace_return, false, true);
}
#endif /* CONFIG_DYNAMIC_FTRACE */
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
--- a/arch/riscv/kernel/mcount-dyn.S
+++ b/arch/riscv/kernel/mcount-dyn.S
@@ -13,8 +13,8 @@
.text
-#define FENTRY_RA_OFFSET 12
-#define ABI_SIZE_ON_STACK 72
+#define FENTRY_RA_OFFSET 8
+#define ABI_SIZE_ON_STACK 80
#define ABI_A0 0
#define ABI_A1 8
#define ABI_A2 16
@@ -23,10 +23,10 @@
#define ABI_A5 40
#define ABI_A6 48
#define ABI_A7 56
-#define ABI_RA 64
+#define ABI_T0 64
+#define ABI_RA 72
.macro SAVE_ABI
- addi sp, sp, -SZREG
addi sp, sp, -ABI_SIZE_ON_STACK
REG_S a0, ABI_A0(sp)
@@ -37,6 +37,7 @@
REG_S a5, ABI_A5(sp)
REG_S a6, ABI_A6(sp)
REG_S a7, ABI_A7(sp)
+ REG_S t0, ABI_T0(sp)
REG_S ra, ABI_RA(sp)
.endm
@@ -49,24 +50,18 @@
REG_L a5, ABI_A5(sp)
REG_L a6, ABI_A6(sp)
REG_L a7, ABI_A7(sp)
+ REG_L t0, ABI_T0(sp)
REG_L ra, ABI_RA(sp)
addi sp, sp, ABI_SIZE_ON_STACK
- addi sp, sp, SZREG
.endm
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
.macro SAVE_ALL
- addi sp, sp, -SZREG
addi sp, sp, -PT_SIZE_ON_STACK
- REG_S x1, PT_EPC(sp)
- addi sp, sp, PT_SIZE_ON_STACK
- REG_L x1, (sp)
- addi sp, sp, -PT_SIZE_ON_STACK
+ REG_S t0, PT_EPC(sp)
REG_S x1, PT_RA(sp)
- REG_L x1, PT_EPC(sp)
-
REG_S x2, PT_SP(sp)
REG_S x3, PT_GP(sp)
REG_S x4, PT_TP(sp)
@@ -100,15 +95,11 @@
.endm
.macro RESTORE_ALL
+ REG_L t0, PT_EPC(sp)
REG_L x1, PT_RA(sp)
- addi sp, sp, PT_SIZE_ON_STACK
- REG_S x1, (sp)
- addi sp, sp, -PT_SIZE_ON_STACK
- REG_L x1, PT_EPC(sp)
REG_L x2, PT_SP(sp)
REG_L x3, PT_GP(sp)
REG_L x4, PT_TP(sp)
- REG_L x5, PT_T0(sp)
REG_L x6, PT_T1(sp)
REG_L x7, PT_T2(sp)
REG_L x8, PT_S0(sp)
@@ -137,17 +128,16 @@
REG_L x31, PT_T6(sp)
addi sp, sp, PT_SIZE_ON_STACK
- addi sp, sp, SZREG
.endm
#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
ENTRY(ftrace_caller)
SAVE_ABI
- addi a0, ra, -FENTRY_RA_OFFSET
+ addi a0, t0, -FENTRY_RA_OFFSET
la a1, function_trace_op
REG_L a2, 0(a1)
- REG_L a1, ABI_SIZE_ON_STACK(sp)
+ mv a1, ra
mv a3, sp
ftrace_call:
@@ -155,8 +145,8 @@ ftrace_call:
call ftrace_stub
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- addi a0, sp, ABI_SIZE_ON_STACK
- REG_L a1, ABI_RA(sp)
+ addi a0, sp, ABI_RA
+ REG_L a1, ABI_T0(sp)
addi a1, a1, -FENTRY_RA_OFFSET
#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
mv a2, s0
@@ -166,17 +156,17 @@ ftrace_graph_call:
call ftrace_stub
#endif
RESTORE_ABI
- ret
+ jr t0
ENDPROC(ftrace_caller)
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
ENTRY(ftrace_regs_caller)
SAVE_ALL
- addi a0, ra, -FENTRY_RA_OFFSET
+ addi a0, t0, -FENTRY_RA_OFFSET
la a1, function_trace_op
REG_L a2, 0(a1)
- REG_L a1, PT_SIZE_ON_STACK(sp)
+ mv a1, ra
mv a3, sp
ftrace_regs_call:
@@ -196,6 +186,6 @@ ftrace_graph_regs_call:
#endif
RESTORE_ALL
- ret
+ jr t0
ENDPROC(ftrace_regs_caller)
#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 863/885] MIPS: DTS: CI20: fix otg power gpio
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (861 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 862/885] riscv: ftrace: Reduce the detour code size to half Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 864/885] PCI/PM: Observe reset delay irrespective of bridge_d3 Greg Kroah-Hartman
` (24 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, H. Nikolaus Schaller, Paul Cercueil,
Thomas Bogendoerfer
From: H. Nikolaus Schaller <hns@goldelico.com>
commit 0cb4228f6cc9ed0ca2be0d9ddf29168a8e3a3905 upstream.
According to schematics it is PF15 and not PF14 (MIC_SW_EN).
Seems as if it was hidden and not noticed during testing since
there is no sound DT node.
Fixes: 158c774d3c64 ("MIPS: Ingenic: Add missing nodes for Ingenic SoCs and boards.")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/boot/dts/ingenic/ci20.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -113,7 +113,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpf 14 GPIO_ACTIVE_LOW>;
+ gpio = <&gpf 15 GPIO_ACTIVE_LOW>;
enable-active-high;
};
};
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 864/885] PCI/PM: Observe reset delay irrespective of bridge_d3
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (862 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 863/885] MIPS: DTS: CI20: fix otg power gpio Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 865/885] PCI: Unify delay handling for reset and resume Greg Kroah-Hartman
` (23 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ravi Kishore Koppuravuri,
Lukas Wunner, Bjorn Helgaas, Mika Westerberg,
Kuppuswamy Sathyanarayanan
From: Lukas Wunner <lukas@wunner.de>
commit 8ef0217227b42e2c34a18de316cee3da16c9bf1e upstream.
If a PCI bridge is suspended to D3cold upon entering system sleep,
resuming it entails a Fundamental Reset per PCIe r6.0 sec 5.8.
The delay prescribed after a Fundamental Reset in PCIe r6.0 sec 6.6.1
is sought to be observed by:
pci_pm_resume_noirq()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
However, pci_bridge_wait_for_secondary_bus() bails out if the bridge_d3
flag is not set. That flag indicates whether a bridge is allowed to
suspend to D3cold at *runtime*.
Hence *no* delay is observed on resume from system sleep if runtime
D3cold is forbidden. That doesn't make any sense, so drop the bridge_d3
check from pci_bridge_wait_for_secondary_bus().
The purpose of the bridge_d3 check was probably to avoid delays if a
bridge remained in D0 during suspend. However the sole caller of
pci_bridge_wait_for_secondary_bus(), pci_pm_bridge_power_up_actions(),
is only invoked if the previous power state was D3cold. Hence the
additional bridge_d3 check seems superfluous.
Fixes: ad9001f2f411 ("PCI/PM: Add missing link delays required by the PCIe spec")
Link: https://lore.kernel.org/r/eb37fa345285ec8bacabbf06b020b803f77bdd3d.1673769517.git.lukas@wunner.de
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4957,7 +4957,7 @@ void pci_bridge_wait_for_secondary_bus(s
if (pci_dev_is_disconnected(dev))
return;
- if (!pci_is_bridge(dev) || !dev->bridge_d3)
+ if (!pci_is_bridge(dev))
return;
down_read(&pci_bus_sem);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 865/885] PCI: Unify delay handling for reset and resume
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (863 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 864/885] PCI/PM: Observe reset delay irrespective of bridge_d3 Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 866/885] PCI: hotplug: Allow marking devices as disconnected during bind/unbind Greg Kroah-Hartman
` (22 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sheng Bi, Ravi Kishore Koppuravuri,
Lukas Wunner, Bjorn Helgaas, Mika Westerberg,
Kuppuswamy Sathyanarayanan
From: Lukas Wunner <lukas@wunner.de>
commit ac91e6980563ed53afadd925fa6585ffd2bc4a2c upstream.
Sheng Bi reports that pci_bridge_secondary_bus_reset() may fail to wait
for devices on the secondary bus to become accessible after reset:
Although it does call pci_dev_wait(), it erroneously passes the bridge's
pci_dev rather than that of a child. The bridge of course is always
accessible while its secondary bus is reset, so pci_dev_wait() returns
immediately.
Sheng Bi proposes introducing a new pci_bridge_secondary_bus_wait()
function which is called from pci_bridge_secondary_bus_reset():
https://lore.kernel.org/linux-pci/20220523171517.32407-1-windy.bi.enflame@gmail.com/
However we already have pci_bridge_wait_for_secondary_bus() which does
almost exactly what we need. So far it's only called on resume from
D3cold (which implies a Fundamental Reset per PCIe r6.0 sec 5.8).
Re-using it for Secondary Bus Resets is a leaner and more rational
approach than introducing a new function.
That only requires a few minor tweaks:
- Amend pci_bridge_wait_for_secondary_bus() to await accessibility of
the first device on the secondary bus by calling pci_dev_wait() after
performing the prescribed delays. pci_dev_wait() needs two parameters,
a reset reason and a timeout, which callers must now pass to
pci_bridge_wait_for_secondary_bus(). The timeout is 1 sec for resume
(PCIe r6.0 sec 6.6.1) and 60 sec for reset (commit 821cdad5c46c ("PCI:
Wait up to 60 seconds for device to become ready after FLR")).
Introduce a PCI_RESET_WAIT macro for the 1 sec timeout.
- Amend pci_bridge_wait_for_secondary_bus() to return 0 on success or
-ENOTTY on error for consumption by pci_bridge_secondary_bus_reset().
- Drop an unnecessary 1 sec delay from pci_reset_secondary_bus() which
is now performed by pci_bridge_wait_for_secondary_bus(). A static
delay this long is only necessary for Conventional PCI, so modern
PCIe systems benefit from shorter reset times as a side effect.
Fixes: 6b2f1351af56 ("PCI: Wait for device to become ready after secondary bus reset")
Link: https://lore.kernel.org/r/da77c92796b99ec568bd070cbe4725074a117038.1673769517.git.lukas@wunner.de
Reported-by: Sheng Bi <windy.bi.enflame@gmail.com>
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/pci-driver.c | 2 -
drivers/pci/pci.c | 54 ++++++++++++++++++++---------------------------
drivers/pci/pci.h | 10 +++++++-
3 files changed, 34 insertions(+), 32 deletions(-)
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -572,7 +572,7 @@ static void pci_pm_default_resume_early(
static void pci_pm_bridge_power_up_actions(struct pci_dev *pci_dev)
{
- pci_bridge_wait_for_secondary_bus(pci_dev);
+ pci_bridge_wait_for_secondary_bus(pci_dev, "resume", PCI_RESET_WAIT);
/*
* When powering on a bridge from D3cold, the whole hierarchy may be
* powered on into D0uninitialized state, resume them to give them a
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1174,7 +1174,7 @@ static int pci_dev_wait(struct pci_dev *
return -ENOTTY;
}
- if (delay > 1000)
+ if (delay > PCI_RESET_WAIT)
pci_info(dev, "not ready %dms after %s; waiting\n",
delay - 1, reset_type);
@@ -1183,7 +1183,7 @@ static int pci_dev_wait(struct pci_dev *
pci_read_config_dword(dev, PCI_COMMAND, &id);
}
- if (delay > 1000)
+ if (delay > PCI_RESET_WAIT)
pci_info(dev, "ready %dms after %s\n", delay - 1,
reset_type);
@@ -4941,24 +4941,31 @@ static int pci_bus_max_d3cold_delay(cons
/**
* pci_bridge_wait_for_secondary_bus - Wait for secondary bus to be accessible
* @dev: PCI bridge
+ * @reset_type: reset type in human-readable form
+ * @timeout: maximum time to wait for devices on secondary bus (milliseconds)
*
* Handle necessary delays before access to the devices on the secondary
- * side of the bridge are permitted after D3cold to D0 transition.
+ * side of the bridge are permitted after D3cold to D0 transition
+ * or Conventional Reset.
*
* For PCIe this means the delays in PCIe 5.0 section 6.6.1. For
* conventional PCI it means Tpvrh + Trhfa specified in PCI 3.0 section
* 4.3.2.
+ *
+ * Return 0 on success or -ENOTTY if the first device on the secondary bus
+ * failed to become accessible.
*/
-void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev)
+int pci_bridge_wait_for_secondary_bus(struct pci_dev *dev, char *reset_type,
+ int timeout)
{
struct pci_dev *child;
int delay;
if (pci_dev_is_disconnected(dev))
- return;
+ return 0;
if (!pci_is_bridge(dev))
- return;
+ return 0;
down_read(&pci_bus_sem);
@@ -4970,14 +4977,14 @@ void pci_bridge_wait_for_secondary_bus(s
*/
if (!dev->subordinate || list_empty(&dev->subordinate->devices)) {
up_read(&pci_bus_sem);
- return;
+ return 0;
}
/* Take d3cold_delay requirements into account */
delay = pci_bus_max_d3cold_delay(dev->subordinate);
if (!delay) {
up_read(&pci_bus_sem);
- return;
+ return 0;
}
child = list_first_entry(&dev->subordinate->devices, struct pci_dev,
@@ -4986,14 +4993,12 @@ void pci_bridge_wait_for_secondary_bus(s
/*
* Conventional PCI and PCI-X we need to wait Tpvrh + Trhfa before
- * accessing the device after reset (that is 1000 ms + 100 ms). In
- * practice this should not be needed because we don't do power
- * management for them (see pci_bridge_d3_possible()).
+ * accessing the device after reset (that is 1000 ms + 100 ms).
*/
if (!pci_is_pcie(dev)) {
pci_dbg(dev, "waiting %d ms for secondary bus\n", 1000 + delay);
msleep(1000 + delay);
- return;
+ return 0;
}
/*
@@ -5010,11 +5015,11 @@ void pci_bridge_wait_for_secondary_bus(s
* configuration requests if we only wait for 100 ms (see
* https://bugzilla.kernel.org/show_bug.cgi?id=203885).
*
- * Therefore we wait for 100 ms and check for the device presence.
- * If it is still not present give it an additional 100 ms.
+ * Therefore we wait for 100 ms and check for the device presence
+ * until the timeout expires.
*/
if (!pcie_downstream_port(dev))
- return;
+ return 0;
if (pcie_get_speed_cap(dev) <= PCIE_SPEED_5_0GT) {
pci_dbg(dev, "waiting %d ms for downstream link\n", delay);
@@ -5025,14 +5030,11 @@ void pci_bridge_wait_for_secondary_bus(s
if (!pcie_wait_for_link_delay(dev, true, delay)) {
/* Did not train, no need to wait any further */
pci_info(dev, "Data Link Layer Link Active not set in 1000 msec\n");
- return;
+ return -ENOTTY;
}
}
- if (!pci_device_is_present(child)) {
- pci_dbg(child, "waiting additional %d ms to become accessible\n", delay);
- msleep(delay);
- }
+ return pci_dev_wait(child, reset_type, timeout - delay);
}
void pci_reset_secondary_bus(struct pci_dev *dev)
@@ -5051,15 +5053,6 @@ void pci_reset_secondary_bus(struct pci_
ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
-
- /*
- * Trhfa for conventional PCI is 2^25 clock cycles.
- * Assuming a minimum 33MHz clock this results in a 1s
- * delay before we can consider subordinate devices to
- * be re-initialized. PCIe has some ways to shorten this,
- * but we don't make use of them yet.
- */
- ssleep(1);
}
void __weak pcibios_reset_secondary_bus(struct pci_dev *dev)
@@ -5078,7 +5071,8 @@ int pci_bridge_secondary_bus_reset(struc
{
pcibios_reset_secondary_bus(dev);
- return pci_dev_wait(dev, "bus reset", PCIE_RESET_READY_POLL_MS);
+ return pci_bridge_wait_for_secondary_bus(dev, "bus reset",
+ PCIE_RESET_READY_POLL_MS);
}
EXPORT_SYMBOL_GPL(pci_bridge_secondary_bus_reset);
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -63,6 +63,13 @@ struct pci_cap_saved_state *pci_find_sav
#define PCI_PM_D3HOT_WAIT 10 /* msec */
#define PCI_PM_D3COLD_WAIT 100 /* msec */
+/*
+ * Following exit from Conventional Reset, devices must be ready within 1 sec
+ * (PCIe r6.0 sec 6.6.1). A D3cold to D0 transition implies a Conventional
+ * Reset (PCIe r6.0 sec 5.8).
+ */
+#define PCI_RESET_WAIT 1000 /* msec */
+
void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
void pci_refresh_power_state(struct pci_dev *dev);
int pci_power_up(struct pci_dev *dev);
@@ -85,8 +92,9 @@ void pci_msi_init(struct pci_dev *dev);
void pci_msix_init(struct pci_dev *dev);
bool pci_bridge_d3_possible(struct pci_dev *dev);
void pci_bridge_d3_update(struct pci_dev *dev);
-void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev);
void pci_bridge_reconfigure_ltr(struct pci_dev *dev);
+int pci_bridge_wait_for_secondary_bus(struct pci_dev *dev, char *reset_type,
+ int timeout);
static inline void pci_wakeup_event(struct pci_dev *dev)
{
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 866/885] PCI: hotplug: Allow marking devices as disconnected during bind/unbind
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (864 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 865/885] PCI: Unify delay handling for reset and resume Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 867/885] PCI: Avoid FLR for AMD FCH AHCI adapters Greg Kroah-Hartman
` (21 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Anatoli Antonovitch, Lukas Wunner,
Bjorn Helgaas, Keith Busch
From: Lukas Wunner <lukas@wunner.de>
commit 74ff8864cc842be994853095dba6db48e716400a upstream.
On surprise removal, pciehp_unconfigure_device() and acpiphp's
trim_stale_devices() call pci_dev_set_disconnected() to mark removed
devices as permanently offline. Thereby, the PCI core and drivers know
to skip device accesses.
However pci_dev_set_disconnected() takes the device_lock and thus waits for
a concurrent driver bind or unbind to complete. As a result, the driver's
->probe and ->remove hooks have no chance to learn that the device is gone.
That doesn't make any sense, so drop the device_lock and instead use atomic
xchg() and cmpxchg() operations to update the device state.
As a byproduct, an AB-BA deadlock reported by Anatoli is fixed which occurs
on surprise removal with AER concurrently performing a bus reset.
AER bus reset:
INFO: task irq/26-aerdrv:95 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule
rwsem_down_write_slowpath
down_write_nested
pciehp_reset_slot # acquires reset_lock
pci_reset_hotplug_slot
pci_slot_reset # acquires device_lock
pci_bus_error_reset
aer_root_reset
pcie_do_recovery
aer_process_err_devices
aer_isr
pciehp surprise removal:
INFO: task irq/26-pciehp:96 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule_preempt_disabled
__mutex_lock
mutex_lock_nested
pci_dev_set_disconnected # acquires device_lock
pci_walk_bus
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist # acquires reset_lock
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes: a6bd101b8f84 ("PCI: Unify device inaccessible")
Link: https://lore.kernel.org/r/3dc88ea82bdc0e37d9000e413d5ebce481cbd629.1674205689.git.lukas@wunner.de
Reported-by: Anatoli Antonovitch <anatoli.antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.20+
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/pci.h | 43 +++++++++++++------------------------------
1 file changed, 13 insertions(+), 30 deletions(-)
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -317,53 +317,36 @@ struct pci_sriov {
* @dev: PCI device to set new error_state
* @new: the state we want dev to be in
*
- * Must be called with device_lock held.
+ * If the device is experiencing perm_failure, it has to remain in that state.
+ * Any other transition is allowed.
*
* Returns true if state has been changed to the requested state.
*/
static inline bool pci_dev_set_io_state(struct pci_dev *dev,
pci_channel_state_t new)
{
- bool changed = false;
+ pci_channel_state_t old;
- device_lock_assert(&dev->dev);
switch (new) {
case pci_channel_io_perm_failure:
- switch (dev->error_state) {
- case pci_channel_io_frozen:
- case pci_channel_io_normal:
- case pci_channel_io_perm_failure:
- changed = true;
- break;
- }
- break;
+ xchg(&dev->error_state, pci_channel_io_perm_failure);
+ return true;
case pci_channel_io_frozen:
- switch (dev->error_state) {
- case pci_channel_io_frozen:
- case pci_channel_io_normal:
- changed = true;
- break;
- }
- break;
+ old = cmpxchg(&dev->error_state, pci_channel_io_normal,
+ pci_channel_io_frozen);
+ return old != pci_channel_io_perm_failure;
case pci_channel_io_normal:
- switch (dev->error_state) {
- case pci_channel_io_frozen:
- case pci_channel_io_normal:
- changed = true;
- break;
- }
- break;
+ old = cmpxchg(&dev->error_state, pci_channel_io_frozen,
+ pci_channel_io_normal);
+ return old != pci_channel_io_perm_failure;
+ default:
+ return false;
}
- if (changed)
- dev->error_state = new;
- return changed;
}
static inline int pci_dev_set_disconnected(struct pci_dev *dev, void *unused)
{
- device_lock(&dev->dev);
pci_dev_set_io_state(dev, pci_channel_io_perm_failure);
- device_unlock(&dev->dev);
return 0;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 867/885] PCI: Avoid FLR for AMD FCH AHCI adapters
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (865 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 866/885] PCI: hotplug: Allow marking devices as disconnected during bind/unbind Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 868/885] PCI/DPC: Await readiness of secondary bus after reset Greg Kroah-Hartman
` (20 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Niklas Cassel, Damien Le Moal,
Bjorn Helgaas
From: Damien Le Moal <damien.lemoal@opensource.wdc.com>
commit 63ba51db24ed1b8f8088a897290eb6c036c5435d upstream.
PCI passthrough to VMs does not work with AMD FCH AHCI adapters: the guest
OS fails to correctly probe devices attached to the controller due to FIS
communication failures:
ata4: softreset failed (1st FIS failed)
...
ata4.00: qc timeout after 5000 msecs (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Forcing the "bus" reset method before unbinding & binding the adapter to
the vfio-pci driver solves this issue, e.g.:
echo "bus" > /sys/bus/pci/devices/<ID>/reset_method
gives a working guest OS, indicating that the default FLR reset method
doesn't work correctly.
Apply quirk_no_flr() to AMD FCH AHCI devices to work around this issue.
Link: https://lore.kernel.org/r/20230128013951.523247-1-damien.lemoal@opensource.wdc.com
Reported-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5340,6 +5340,7 @@ static void quirk_no_flr(struct pci_dev
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x1487, quirk_no_flr);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x148c, quirk_no_flr);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x149c, quirk_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x7901, quirk_no_flr);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_no_flr);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_no_flr);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 868/885] PCI/DPC: Await readiness of secondary bus after reset
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (866 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 867/885] PCI: Avoid FLR for AMD FCH AHCI adapters Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 869/885] bus: mhi: ep: Only send -ENOTCONN status if client driver is available Greg Kroah-Hartman
` (19 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ravi Kishore Koppuravuri,
Lukas Wunner, Bjorn Helgaas, Mika Westerberg
From: Lukas Wunner <lukas@wunner.de>
commit 53b54ad074de1896f8b021615f65b27f557ce874 upstream.
pci_bridge_wait_for_secondary_bus() is called after a Secondary Bus
Reset, but not after a DPC-induced Hot Reset.
As a result, the delays prescribed by PCIe r6.0 sec 6.6.1 are not
observed and devices on the secondary bus may be accessed before
they're ready.
One affected device is Intel's Ponte Vecchio HPC GPU. It comprises a
PCIe switch whose upstream port is not immediately ready after reset.
Because its config space is restored too early, it remains in
D0uninitialized, its subordinate devices remain inaccessible and DPC
recovery fails with messages such as:
i915 0000:8c:00.0: can't change power state from D3cold to D0 (config space inaccessible)
intel_vsec 0000:8e:00.1: can't change power state from D3cold to D0 (config space inaccessible)
pcieport 0000:89:02.0: AER: device recovery failed
Fix it.
Link: https://lore.kernel.org/r/9f5ff00e1593d8d9a4b452398b98aa14d23fca11.1673769517.git.lukas@wunner.de
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/pci.c | 3 ---
drivers/pci/pci.h | 6 ++++++
drivers/pci/pcie/dpc.c | 4 ++--
3 files changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -167,9 +167,6 @@ static int __init pcie_port_pm_setup(cha
}
__setup("pcie_port_pm=", pcie_port_pm_setup);
-/* Time to wait after a reset for device to become responsive */
-#define PCIE_RESET_READY_POLL_MS 60000
-
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
* @bus: pointer to PCI bus structure to search
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -69,6 +69,12 @@ struct pci_cap_saved_state *pci_find_sav
* Reset (PCIe r6.0 sec 5.8).
*/
#define PCI_RESET_WAIT 1000 /* msec */
+/*
+ * Devices may extend the 1 sec period through Request Retry Status completions
+ * (PCIe r6.0 sec 2.3.1). The spec does not provide an upper limit, but 60 sec
+ * ought to be enough for any device to become responsive.
+ */
+#define PCIE_RESET_READY_POLL_MS 60000 /* msec */
void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
void pci_refresh_power_state(struct pci_dev *dev);
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -170,8 +170,8 @@ pci_ers_result_t dpc_reset_link(struct p
pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
PCI_EXP_DPC_STATUS_TRIGGER);
- if (!pcie_wait_for_link(pdev, true)) {
- pci_info(pdev, "Data Link Layer Link Active not set in 1000 msec\n");
+ if (pci_bridge_wait_for_secondary_bus(pdev, "DPC",
+ PCIE_RESET_READY_POLL_MS)) {
clear_bit(PCI_DPC_RECOVERED, &pdev->priv_flags);
ret = PCI_ERS_RESULT_DISCONNECT;
} else {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 869/885] bus: mhi: ep: Only send -ENOTCONN status if client driver is available
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (867 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 868/885] PCI/DPC: Await readiness of secondary bus after reset Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 870/885] bus: mhi: ep: Move chan->lock to the start of processing queued ch ring Greg Kroah-Hartman
` (18 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Manivannan Sadhasivam, Jeffrey Hugo
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
commit e6cebcc27519dcf1652e604c73b9fd4f416987c0 upstream.
For the STOP and RESET commands, only send the channel disconnect status
-ENOTCONN if client driver is available. Otherwise, it will result in
null pointer dereference.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e827569062a8 ("bus: mhi: ep: Add support for processing command rings")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bus/mhi/ep/main.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
--- a/drivers/bus/mhi/ep/main.c
+++ b/drivers/bus/mhi/ep/main.c
@@ -196,9 +196,11 @@ static int mhi_ep_process_cmd_ring(struc
mhi_ep_mmio_disable_chdb(mhi_cntrl, ch_id);
/* Send channel disconnect status to client drivers */
- result.transaction_status = -ENOTCONN;
- result.bytes_xferd = 0;
- mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+ if (mhi_chan->xfer_cb) {
+ result.transaction_status = -ENOTCONN;
+ result.bytes_xferd = 0;
+ mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+ }
/* Set channel state to STOP */
mhi_chan->state = MHI_CH_STATE_STOP;
@@ -228,9 +230,11 @@ static int mhi_ep_process_cmd_ring(struc
mhi_ep_ring_reset(mhi_cntrl, ch_ring);
/* Send channel disconnect status to client driver */
- result.transaction_status = -ENOTCONN;
- result.bytes_xferd = 0;
- mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+ if (mhi_chan->xfer_cb) {
+ result.transaction_status = -ENOTCONN;
+ result.bytes_xferd = 0;
+ mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+ }
/* Set channel state to DISABLED */
mhi_chan->state = MHI_CH_STATE_DISABLED;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 870/885] bus: mhi: ep: Move chan->lock to the start of processing queued ch ring
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (868 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 869/885] bus: mhi: ep: Only send -ENOTCONN status if client driver is available Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 871/885] bus: mhi: ep: Save channel state locally during suspend and resume Greg Kroah-Hartman
` (17 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Manivannan Sadhasivam, Jeffrey Hugo
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
commit 8d6a1fea53864cd9545741f48f4ae4df804db557 upstream.
There is a good chance that while the channel ring gets processed, the STOP
or RESET command for the channel might be received from the MHI host. In
those cases, the entire channel ring processing needs to be protected by
chan->lock to prevent the race where the corresponding channel ring might
be reset.
While at it, let's also add a sanity check to make sure that the ring is
started before processing it. Because, if the STOP/RESET command gets
processed while mhi_ep_ch_ring_worker() waited for chan->lock, the ring
would've been reset.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: 03c0bb8ec983 ("bus: mhi: ep: Add support for processing channel rings")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bus/mhi/ep/main.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
--- a/drivers/bus/mhi/ep/main.c
+++ b/drivers/bus/mhi/ep/main.c
@@ -723,24 +723,37 @@ static void mhi_ep_ch_ring_worker(struct
list_del(&itr->node);
ring = itr->ring;
+ chan = &mhi_cntrl->mhi_chan[ring->ch_id];
+ mutex_lock(&chan->lock);
+
+ /*
+ * The ring could've stopped while we waited to grab the (chan->lock), so do
+ * a sanity check before going further.
+ */
+ if (!ring->started) {
+ mutex_unlock(&chan->lock);
+ kfree(itr);
+ continue;
+ }
+
/* Update the write offset for the ring */
ret = mhi_ep_update_wr_offset(ring);
if (ret) {
dev_err(dev, "Error updating write offset for ring\n");
+ mutex_unlock(&chan->lock);
kfree(itr);
continue;
}
/* Sanity check to make sure there are elements in the ring */
if (ring->rd_offset == ring->wr_offset) {
+ mutex_unlock(&chan->lock);
kfree(itr);
continue;
}
el = &ring->ring_cache[ring->rd_offset];
- chan = &mhi_cntrl->mhi_chan[ring->ch_id];
- mutex_lock(&chan->lock);
dev_dbg(dev, "Processing the ring for channel (%u)\n", ring->ch_id);
ret = mhi_ep_process_ch_ring(ring, el);
if (ret) {
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 871/885] bus: mhi: ep: Save channel state locally during suspend and resume
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (869 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 870/885] bus: mhi: ep: Move chan->lock to the start of processing queued ch ring Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 872/885] iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode Greg Kroah-Hartman
` (16 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Manivannan Sadhasivam
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
commit 8a1c24bb908f9ecbc4be0fea014df67d43161551 upstream.
During suspend and resume, the channel state needs to be saved locally.
Otherwise, the endpoint may access the channels while they were being
suspended and causing access violations.
Fix it by saving the channel state locally during suspend and resume.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e4b7b5f0f30a ("bus: mhi: ep: Add support for suspending and resuming channels")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com)
Link: https://lore.kernel.org/r/20221228161704.255268-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bus/mhi/ep/main.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/bus/mhi/ep/main.c
+++ b/drivers/bus/mhi/ep/main.c
@@ -1136,6 +1136,7 @@ void mhi_ep_suspend_channels(struct mhi_
dev_dbg(&mhi_chan->mhi_dev->dev, "Suspending channel\n");
/* Set channel state to SUSPENDED */
+ mhi_chan->state = MHI_CH_STATE_SUSPENDED;
tmp &= ~CHAN_CTX_CHSTATE_MASK;
tmp |= FIELD_PREP(CHAN_CTX_CHSTATE_MASK, MHI_CH_STATE_SUSPENDED);
mhi_cntrl->ch_ctx_cache[i].chcfg = cpu_to_le32(tmp);
@@ -1165,6 +1166,7 @@ void mhi_ep_resume_channels(struct mhi_e
dev_dbg(&mhi_chan->mhi_dev->dev, "Resuming channel\n");
/* Set channel state to RUNNING */
+ mhi_chan->state = MHI_CH_STATE_RUNNING;
tmp &= ~CHAN_CTX_CHSTATE_MASK;
tmp |= FIELD_PREP(CHAN_CTX_CHSTATE_MASK, MHI_CH_STATE_RUNNING);
mhi_cntrl->ch_ctx_cache[i].chcfg = cpu_to_le32(tmp);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 872/885] iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (870 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 871/885] bus: mhi: ep: Save channel state locally during suspend and resume Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 873/885] iommu/vt-d: Fix PASID directory pointer coherency Greg Kroah-Hartman
` (15 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Robin Murphy, Kevin Tian,
Sanjay Kumar, Jacob Pan, Lu Baolu, Joerg Roedel
From: Jacob Pan <jacob.jun.pan@linux.intel.com>
commit 16a75bbe480c3598b3af57a2504ea89b1e32c3ac upstream.
Intel IOMMU driver implements IOTLB flush queue with domain selective
or PASID selective invalidations. In this case there's no need to track
IOVA page range and sync IOTLBs, which may cause significant performance
hit.
This patch adds a check to avoid IOVA gather page and IOTLB sync for
the lazy path.
The performance difference on Sapphire Rapids 100Gb NIC is improved by
the following (as measured by iperf send):
w/o this fix~48 Gbits/s. with this fix ~54 Gbits/s
Cc: <stable@vger.kernel.org>
Fixes: 2a2b8eaa5b25 ("iommu: Handle freelists when using deferred flushing in iommu drivers")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230209175330.1783556-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iommu/intel/iommu.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -4359,7 +4359,12 @@ static size_t intel_iommu_unmap(struct i
if (dmar_domain->max_addr == iova + size)
dmar_domain->max_addr = iova;
- iommu_iotlb_gather_add_page(domain, gather, iova, size);
+ /*
+ * We do not use page-selective IOTLB invalidation in flush queue,
+ * so there is no need to track page and sync iotlb.
+ */
+ if (!iommu_iotlb_gather_queued(gather))
+ iommu_iotlb_gather_add_page(domain, gather, iova, size);
return size;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 873/885] iommu/vt-d: Fix PASID directory pointer coherency
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (871 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 872/885] iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 874/885] vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR Greg Kroah-Hartman
` (14 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kevin Tian, Sukumar Ghorai,
Ashok Raj, Jacob Pan, Lu Baolu, Joerg Roedel
From: Jacob Pan <jacob.jun.pan@linux.intel.com>
commit 194b3348bdbb7db65375c72f3f774aee4cc6614e upstream.
On platforms that do not support IOMMU Extended capability bit 0
Page-walk Coherency, CPU caches are not snooped when IOMMU is accessing
any translation structures. IOMMU access goes only directly to
memory. Intel IOMMU code was missing a flush for the PASID table
directory that resulted in the unrecoverable fault as shown below.
This patch adds clflush calls whenever allocating and updating
a PASID table directory to ensure cache coherency.
On the reverse direction, there's no need to clflush the PASID directory
pointer when we deactivate a context entry in that IOMMU hardware will
not see the old PASID directory pointer after we clear the context entry.
PASID directory entries are also never freed once allocated.
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read NO_PASID] Request device [00:0d.2] fault addr 0x1026a4000
[fault reason 0x51] SM: Present bit in Directory Entry is clear
DMAR: Dump dmar1 table entries for IOVA 0x1026a4000
DMAR: scalable mode root entry: hi 0x0000000102448001, low 0x0000000101b3e001
DMAR: context entry: hi 0x0000000000000000, low 0x0000000101b4d401
DMAR: pasid dir entry: 0x0000000101b4e001
DMAR: pasid table entry[0]: 0x0000000000000109
DMAR: pasid table entry[1]: 0x0000000000000001
DMAR: pasid table entry[2]: 0x0000000000000000
DMAR: pasid table entry[3]: 0x0000000000000000
DMAR: pasid table entry[4]: 0x0000000000000000
DMAR: pasid table entry[5]: 0x0000000000000000
DMAR: pasid table entry[6]: 0x0000000000000000
DMAR: pasid table entry[7]: 0x0000000000000000
DMAR: PTE not present at level 4
Cc: <stable@vger.kernel.org>
Fixes: 0bbeb01a4faf ("iommu/vt-d: Manage scalalble mode PASID tables")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230209212843.1788125-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iommu/intel/pasid.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -126,6 +126,9 @@ int intel_pasid_alloc_table(struct devic
pasid_table->max_pasid = 1 << (order + PAGE_SHIFT + 3);
info->pasid_table = pasid_table;
+ if (!ecap_coherent(info->iommu->ecap))
+ clflush_cache_range(pasid_table->table, size);
+
return 0;
}
@@ -213,6 +216,10 @@ retry:
free_pgtable_page(entries);
goto retry;
}
+ if (!ecap_coherent(info->iommu->ecap)) {
+ clflush_cache_range(entries, VTD_PAGE_SIZE);
+ clflush_cache_range(&dir[dir_index].val, sizeof(*dir));
+ }
}
return &entries[index];
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 874/885] vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (872 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 873/885] iommu/vt-d: Fix PASID directory pointer coherency Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 875/885] vfio/type1: prevent underflow of locked_vm via exec() Greg Kroah-Hartman
` (13 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Steve Sistare, Kevin Tian,
Jason Gunthorpe, Alex Williamson
From: Steve Sistare <steven.sistare@oracle.com>
commit ef3a3f6a294ba65fd906a291553935881796f8a5 upstream.
Disable the VFIO_UPDATE_VADDR capability if mediated devices are present.
Their kernel threads could be blocked indefinitely by a misbehaving
userland while trying to pin/unpin pages while vaddrs are being updated.
Do not allow groups to be added to the container while vaddr's are invalid,
so we never need to block user threads from pinning, and can delete the
vaddr-waiting code in a subsequent patch.
Fixes: c3cbab24db38 ("vfio/type1: implement interfaces to update vaddr")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1675184289-267876-2-git-send-email-steven.sistare@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/vfio/vfio_iommu_type1.c | 44 ++++++++++++++++++++++++++++++++++++++--
include/uapi/linux/vfio.h | 15 ++++++++-----
2 files changed, 51 insertions(+), 8 deletions(-)
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -861,6 +861,12 @@ static int vfio_iommu_type1_pin_pages(vo
mutex_lock(&iommu->lock);
+ if (WARN_ONCE(iommu->vaddr_invalid_count,
+ "vfio_pin_pages not allowed with VFIO_UPDATE_VADDR\n")) {
+ ret = -EBUSY;
+ goto pin_done;
+ }
+
/*
* Wait for all necessary vaddr's to be valid so they can be used in
* the main loop without dropping the lock, to avoid racing vs unmap.
@@ -1343,6 +1349,12 @@ static int vfio_dma_do_unmap(struct vfio
mutex_lock(&iommu->lock);
+ /* Cannot update vaddr if mdev is present. */
+ if (invalidate_vaddr && !list_empty(&iommu->emulated_iommu_groups)) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
pgshift = __ffs(iommu->pgsize_bitmap);
pgsize = (size_t)1 << pgshift;
@@ -2194,11 +2206,16 @@ static int vfio_iommu_type1_attach_group
struct iommu_domain_geometry *geo;
LIST_HEAD(iova_copy);
LIST_HEAD(group_resv_regions);
- int ret = -EINVAL;
+ int ret = -EBUSY;
mutex_lock(&iommu->lock);
+ /* Attach could require pinning, so disallow while vaddr is invalid. */
+ if (iommu->vaddr_invalid_count)
+ goto out_unlock;
+
/* Check for duplicates */
+ ret = -EINVAL;
if (vfio_iommu_find_iommu_group(iommu, iommu_group))
goto out_unlock;
@@ -2669,6 +2686,16 @@ static int vfio_domains_have_enforce_cac
return ret;
}
+static bool vfio_iommu_has_emulated(struct vfio_iommu *iommu)
+{
+ bool ret;
+
+ mutex_lock(&iommu->lock);
+ ret = !list_empty(&iommu->emulated_iommu_groups);
+ mutex_unlock(&iommu->lock);
+ return ret;
+}
+
static int vfio_iommu_type1_check_extension(struct vfio_iommu *iommu,
unsigned long arg)
{
@@ -2677,8 +2704,13 @@ static int vfio_iommu_type1_check_extens
case VFIO_TYPE1v2_IOMMU:
case VFIO_TYPE1_NESTING_IOMMU:
case VFIO_UNMAP_ALL:
- case VFIO_UPDATE_VADDR:
return 1;
+ case VFIO_UPDATE_VADDR:
+ /*
+ * Disable this feature if mdevs are present. They cannot
+ * safely pin/unpin/rw while vaddrs are being updated.
+ */
+ return iommu && !vfio_iommu_has_emulated(iommu);
case VFIO_DMA_CC_IOMMU:
if (!iommu)
return 0;
@@ -3147,6 +3179,13 @@ static int vfio_iommu_type1_dma_rw(void
size_t done;
mutex_lock(&iommu->lock);
+
+ if (WARN_ONCE(iommu->vaddr_invalid_count,
+ "vfio_dma_rw not allowed with VFIO_UPDATE_VADDR\n")) {
+ ret = -EBUSY;
+ goto out;
+ }
+
while (count > 0) {
ret = vfio_iommu_type1_dma_rw_chunk(iommu, user_iova, data,
count, write, &done);
@@ -3158,6 +3197,7 @@ static int vfio_iommu_type1_dma_rw(void
user_iova += done;
}
+out:
mutex_unlock(&iommu->lock);
return ret;
}
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -49,7 +49,11 @@
/* Supports VFIO_DMA_UNMAP_FLAG_ALL */
#define VFIO_UNMAP_ALL 9
-/* Supports the vaddr flag for DMA map and unmap */
+/*
+ * Supports the vaddr flag for DMA map and unmap. Not supported for mediated
+ * devices, so this capability is subject to change as groups are added or
+ * removed.
+ */
#define VFIO_UPDATE_VADDR 10
/*
@@ -1215,8 +1219,7 @@ struct vfio_iommu_type1_info_dma_avail {
* Map process virtual addresses to IO virtual addresses using the
* provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
*
- * If flags & VFIO_DMA_MAP_FLAG_VADDR, update the base vaddr for iova, and
- * unblock translation of host virtual addresses in the iova range. The vaddr
+ * If flags & VFIO_DMA_MAP_FLAG_VADDR, update the base vaddr for iova. The vaddr
* must have previously been invalidated with VFIO_DMA_UNMAP_FLAG_VADDR. To
* maintain memory consistency within the user application, the updated vaddr
* must address the same memory object as originally mapped. Failure to do so
@@ -1267,9 +1270,9 @@ struct vfio_bitmap {
* must be 0. This cannot be combined with the get-dirty-bitmap flag.
*
* If flags & VFIO_DMA_UNMAP_FLAG_VADDR, do not unmap, but invalidate host
- * virtual addresses in the iova range. Tasks that attempt to translate an
- * iova's vaddr will block. DMA to already-mapped pages continues. This
- * cannot be combined with the get-dirty-bitmap flag.
+ * virtual addresses in the iova range. DMA to already-mapped pages continues.
+ * Groups may not be added to the container while any addresses are invalid.
+ * This cannot be combined with the get-dirty-bitmap flag.
*/
struct vfio_iommu_type1_dma_unmap {
__u32 argsz;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 875/885] vfio/type1: prevent underflow of locked_vm via exec()
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (873 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 874/885] vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 876/885] vfio/type1: track locked_vm per dma Greg Kroah-Hartman
` (12 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Steve Sistare, Kevin Tian,
Jason Gunthorpe, Alex Williamson
From: Steve Sistare <steven.sistare@oracle.com>
commit 046eca5018f8a5dd1dc2cedf87fb5843b9ea3026 upstream.
When a vfio container is preserved across exec, the task does not change,
but it gets a new mm with locked_vm=0, and loses the count from existing
dma mappings. If the user later unmaps a dma mapping, locked_vm underflows
to a large unsigned value, and a subsequent dma map request fails with
ENOMEM in __account_locked_vm.
To avoid underflow, grab and save the mm at the time a dma is mapped.
Use that mm when adjusting locked_vm, rather than re-acquiring the saved
task's mm, which may have changed. If the saved mm is dead, do nothing.
locked_vm is incremented for existing mappings in a subsequent patch.
Fixes: 73fa0d10d077 ("vfio: Type1 IOMMU implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1675184289-267876-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/vfio/vfio_iommu_type1.c | 41 +++++++++++++---------------------------
1 file changed, 14 insertions(+), 27 deletions(-)
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -100,6 +100,7 @@ struct vfio_dma {
struct task_struct *task;
struct rb_root pfn_list; /* Ex-user pinned pfn list */
unsigned long *bitmap;
+ struct mm_struct *mm;
};
struct vfio_batch {
@@ -420,8 +421,8 @@ static int vfio_lock_acct(struct vfio_dm
if (!npage)
return 0;
- mm = async ? get_task_mm(dma->task) : dma->task->mm;
- if (!mm)
+ mm = dma->mm;
+ if (async && !mmget_not_zero(mm))
return -ESRCH; /* process exited */
ret = mmap_write_lock_killable(mm);
@@ -794,8 +795,8 @@ static int vfio_pin_page_external(struct
struct mm_struct *mm;
int ret;
- mm = get_task_mm(dma->task);
- if (!mm)
+ mm = dma->mm;
+ if (!mmget_not_zero(mm))
return -ENODEV;
ret = vaddr_get_pfns(mm, vaddr, 1, dma->prot, pfn_base, pages);
@@ -805,7 +806,7 @@ static int vfio_pin_page_external(struct
ret = 0;
if (do_accounting && !is_invalid_reserved_pfn(*pfn_base)) {
- ret = vfio_lock_acct(dma, 1, true);
+ ret = vfio_lock_acct(dma, 1, false);
if (ret) {
put_pfn(*pfn_base, dma->prot);
if (ret == -ENOMEM)
@@ -1180,6 +1181,7 @@ static void vfio_remove_dma(struct vfio_
vfio_unmap_unpin(iommu, dma, true);
vfio_unlink_dma(iommu, dma);
put_task_struct(dma->task);
+ mmdrop(dma->mm);
vfio_dma_bitmap_free(dma);
if (dma->vaddr_invalid) {
iommu->vaddr_invalid_count--;
@@ -1664,29 +1666,15 @@ static int vfio_dma_do_map(struct vfio_i
* against the locked memory limit and we need to be able to do both
* outside of this call path as pinning can be asynchronous via the
* external interfaces for mdev devices. RLIMIT_MEMLOCK requires a
- * task_struct and VM locked pages requires an mm_struct, however
- * holding an indefinite mm reference is not recommended, therefore we
- * only hold a reference to a task. We could hold a reference to
- * current, however QEMU uses this call path through vCPU threads,
- * which can be killed resulting in a NULL mm and failure in the unmap
- * path when called via a different thread. Avoid this problem by
- * using the group_leader as threads within the same group require
- * both CLONE_THREAD and CLONE_VM and will therefore use the same
- * mm_struct.
- *
- * Previously we also used the task for testing CAP_IPC_LOCK at the
- * time of pinning and accounting, however has_capability() makes use
- * of real_cred, a copy-on-write field, so we can't guarantee that it
- * matches group_leader, or in fact that it might not change by the
- * time it's evaluated. If a process were to call MAP_DMA with
- * CAP_IPC_LOCK but later drop it, it doesn't make sense that they
- * possibly see different results for an iommu_mapped vfio_dma vs
- * externally mapped. Therefore track CAP_IPC_LOCK in vfio_dma at the
- * time of calling MAP_DMA.
+ * task_struct. Save the group_leader so that all DMA tracking uses
+ * the same task, to make debugging easier. VM locked pages requires
+ * an mm_struct, so grab the mm in case the task dies.
*/
get_task_struct(current->group_leader);
dma->task = current->group_leader;
dma->lock_cap = capable(CAP_IPC_LOCK);
+ dma->mm = current->mm;
+ mmgrab(dma->mm);
dma->pfn_list = RB_ROOT;
@@ -3131,9 +3119,8 @@ static int vfio_iommu_type1_dma_rw_chunk
!(dma->prot & IOMMU_READ))
return -EPERM;
- mm = get_task_mm(dma->task);
-
- if (!mm)
+ mm = dma->mm;
+ if (!mmget_not_zero(mm))
return -EPERM;
if (kthread)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 876/885] vfio/type1: track locked_vm per dma
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (874 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 875/885] vfio/type1: prevent underflow of locked_vm via exec() Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 877/885] vfio/type1: restore locked_vm Greg Kroah-Hartman
` (11 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Steve Sistare, Kevin Tian,
Jason Gunthorpe, Alex Williamson
From: Steve Sistare <steven.sistare@oracle.com>
commit 18e292705ba21cc9b3227b9ad5b1c28973605ee5 upstream.
Track locked_vm per dma struct, and create a new subroutine, both for use
in a subsequent patch. No functional change.
Fixes: c3cbab24db38 ("vfio/type1: implement interfaces to update vaddr")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1675184289-267876-4-git-send-email-steven.sistare@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/vfio/vfio_iommu_type1.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -101,6 +101,7 @@ struct vfio_dma {
struct rb_root pfn_list; /* Ex-user pinned pfn list */
unsigned long *bitmap;
struct mm_struct *mm;
+ size_t locked_vm;
};
struct vfio_batch {
@@ -413,6 +414,19 @@ static int vfio_iova_put_vfio_pfn(struct
return ret;
}
+static int mm_lock_acct(struct task_struct *task, struct mm_struct *mm,
+ bool lock_cap, long npage)
+{
+ int ret = mmap_write_lock_killable(mm);
+
+ if (ret)
+ return ret;
+
+ ret = __account_locked_vm(mm, abs(npage), npage > 0, task, lock_cap);
+ mmap_write_unlock(mm);
+ return ret;
+}
+
static int vfio_lock_acct(struct vfio_dma *dma, long npage, bool async)
{
struct mm_struct *mm;
@@ -425,12 +439,9 @@ static int vfio_lock_acct(struct vfio_dm
if (async && !mmget_not_zero(mm))
return -ESRCH; /* process exited */
- ret = mmap_write_lock_killable(mm);
- if (!ret) {
- ret = __account_locked_vm(mm, abs(npage), npage > 0, dma->task,
- dma->lock_cap);
- mmap_write_unlock(mm);
- }
+ ret = mm_lock_acct(dma->task, mm, dma->lock_cap, npage);
+ if (!ret)
+ dma->locked_vm += npage;
if (async)
mmput(mm);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 877/885] vfio/type1: restore locked_vm
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (875 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 876/885] vfio/type1: track locked_vm per dma Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 878/885] drm/amd: Fix initialization for nbio 7.5.1 Greg Kroah-Hartman
` (10 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Steve Sistare, Kevin Tian,
Jason Gunthorpe, Alex Williamson
From: Steve Sistare <steven.sistare@oracle.com>
commit 90fdd158a695d70403163f9a0e4efc5b20f3fd3e upstream.
When a vfio container is preserved across exec or fork-exec, the new
task's mm has a locked_vm count of 0. After a dma vaddr is updated using
VFIO_DMA_MAP_FLAG_VADDR, locked_vm remains 0, and the pinned memory does
not count against the task's RLIMIT_MEMLOCK.
To restore the correct locked_vm count, when VFIO_DMA_MAP_FLAG_VADDR is
used and the dma's mm has changed, add the dma's locked_vm count to
the new mm->locked_vm, subject to the rlimit, and subtract it from the
old mm->locked_vm.
Fixes: c3cbab24db38 ("vfio/type1: implement interfaces to update vaddr")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1675184289-267876-5-git-send-email-steven.sistare@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/vfio/vfio_iommu_type1.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -1591,6 +1591,38 @@ static bool vfio_iommu_iova_dma_valid(st
return list_empty(iova);
}
+static int vfio_change_dma_owner(struct vfio_dma *dma)
+{
+ struct task_struct *task = current->group_leader;
+ struct mm_struct *mm = current->mm;
+ long npage = dma->locked_vm;
+ bool lock_cap;
+ int ret;
+
+ if (mm == dma->mm)
+ return 0;
+
+ lock_cap = capable(CAP_IPC_LOCK);
+ ret = mm_lock_acct(task, mm, lock_cap, npage);
+ if (ret)
+ return ret;
+
+ if (mmget_not_zero(dma->mm)) {
+ mm_lock_acct(dma->task, dma->mm, dma->lock_cap, -npage);
+ mmput(dma->mm);
+ }
+
+ if (dma->task != task) {
+ put_task_struct(dma->task);
+ dma->task = get_task_struct(task);
+ }
+ mmdrop(dma->mm);
+ dma->mm = mm;
+ mmgrab(dma->mm);
+ dma->lock_cap = lock_cap;
+ return 0;
+}
+
static int vfio_dma_do_map(struct vfio_iommu *iommu,
struct vfio_iommu_type1_dma_map *map)
{
@@ -1640,6 +1672,9 @@ static int vfio_dma_do_map(struct vfio_i
dma->size != size) {
ret = -EINVAL;
} else {
+ ret = vfio_change_dma_owner(dma);
+ if (ret)
+ goto out_unlock;
dma->vaddr = vaddr;
dma->vaddr_invalid = false;
iommu->vaddr_invalid_count--;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 878/885] drm/amd: Fix initialization for nbio 7.5.1
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (876 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 877/885] vfio/type1: restore locked_vm Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 879/885] drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nv Greg Kroah-Hartman
` (9 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Richard Gong, Mario Limonciello,
Alex Deucher
From: Mario Limonciello <mario.limonciello@amd.com>
commit 65a24000808f70ac69bd2a96381fa0c7341f20c0 upstream.
A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1
where some NBIO registers aren't properly setup.
Ensure that they're set during initialization.
Tested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c b/drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c
index 31776b12e4c4..4b0d563c6522 100644
--- a/drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c
+++ b/drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c
@@ -382,6 +382,11 @@ static void nbio_v7_2_init_registers(struct amdgpu_device *adev)
if (def != data)
WREG32_PCIE_PORT(SOC15_REG_OFFSET(NBIO, 0, regBIF1_PCIE_MST_CTRL_3), data);
break;
+ case IP_VERSION(7, 5, 1):
+ data = RREG32_SOC15(NBIO, 0, regRCC_DEV2_EPF0_STRAP2);
+ data &= ~RCC_DEV2_EPF0_STRAP2__STRAP_NO_SOFT_RESET_DEV2_F0_MASK;
+ WREG32_SOC15(NBIO, 0, regRCC_DEV2_EPF0_STRAP2, data);
+ fallthrough;
default:
def = data = RREG32_PCIE_PORT(SOC15_REG_OFFSET(NBIO, 0, regPCIE_CONFIG_CNTL));
data = REG_SET_FIELD(data, PCIE_CONFIG_CNTL,
--
2.39.2
^ permalink raw reply related [flat|nested] 899+ messages in thread
* [PATCH 6.1 879/885] drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nv
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (877 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 878/885] drm/amd: Fix initialization for nbio 7.5.1 Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 880/885] drm/radeon: Fix eDP for single-display iMac11,2 Greg Kroah-Hartman
` (8 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Mavroudis Chatzilaridis, Jani Nikula
From: Mavroudis Chatzilaridis <mavchatz@protonmail.com>
commit 5e438bf7f9a1705ebcae5fa89cdbfbc6932a7871 upstream.
This laptop uses inverted backlight PWM. Thus, without this quirk,
backlight brightness decreases as the brightness value increases and
vice versa.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8013
Cc: stable@vger.kernel.org
Signed-off-by: Mavroudis Chatzilaridis <mavchatz@protonmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201184947.8835-1-mavchatz@protonmail.com
(cherry picked from commit 83e7d6fd330d413cb2064e680ffea91b0512a520)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/display/intel_quirks.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/i915/display/intel_quirks.c
+++ b/drivers/gpu/drm/i915/display/intel_quirks.c
@@ -199,6 +199,8 @@ static struct intel_quirk intel_quirks[]
/* ECS Liva Q2 */
{ 0x3185, 0x1019, 0xa94d, quirk_increase_ddi_disabled_time },
{ 0x3184, 0x1019, 0xa94d, quirk_increase_ddi_disabled_time },
+ /* HP Notebook - 14-r206nv */
+ { 0x0f31, 0x103c, 0x220f, quirk_invert_brightness },
};
void intel_init_quirks(struct drm_i915_private *i915)
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 880/885] drm/radeon: Fix eDP for single-display iMac11,2
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (878 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 879/885] drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nv Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [Intel-gfx] " Greg Kroah-Hartman
` (7 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Mark Hawrylak, Alex Deucher
From: Mark Hawrylak <mark.hawrylak@gmail.com>
commit 05eacc198c68cbb35a7281ce4011f8899ee1cfb8 upstream.
Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same
issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on
driver load. This patch treats iMac11,2 the same as iMac10,1,
so the eDP panel stays active.
Additional steps:
Kernel boot parameter radeon.nomodeset=0 required to keep the eDP
panel active.
This patch is an extension of
commit 564d8a2cf3ab ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)")
Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/
Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/radeon/atombios_encoders.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -2122,11 +2122,12 @@ int radeon_atom_pick_dig_encoder(struct
/*
* On DCE32 any encoder can drive any block so usually just use crtc id,
- * but Apple thinks different at least on iMac10,1, so there use linkb,
+ * but Apple thinks different at least on iMac10,1 and iMac11,2, so there use linkb,
* otherwise the internal eDP panel will stay dark.
*/
if (ASIC_IS_DCE32(rdev)) {
- if (dmi_match(DMI_PRODUCT_NAME, "iMac10,1"))
+ if (dmi_match(DMI_PRODUCT_NAME, "iMac10,1") ||
+ dmi_match(DMI_PRODUCT_NAME, "iMac11,2"))
enc_idx = (dig->linkb) ? 1 : 0;
else
enc_idx = radeon_crtc->crtc_id;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 881/885] drm/i915: Dont use stolen memory for ring buffers with LLC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 002/885] HID: asus: use spinlock to safely schedule workers Greg Kroah-Hartman
` (886 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Harrison, Chris Wilson,
Joonas Lahtinen, Jani Nikula, Rodrigo Vivi, Tvrtko Ursulin,
intel-gfx, Jouni Högander, Daniele Ceraolo Spurio,
Jani Nikula
From: John Harrison <John.C.Harrison@Intel.com>
commit 690e0ec8e63da9a29b39fedc6ed5da09c7c82651 upstream.
Direction from hardware is that stolen memory should never be used for
ring buffer allocations on platforms with LLC. There are too many
caching pitfalls due to the way stolen memory accesses are routed. So
it is safest to just not use it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: c58b735fc762 ("drm/i915: Allocate rings from stolen")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-2-John.C.Harrison@Intel.com
(cherry picked from commit f54c1f6c697c4297f7ed94283c184acc338a5cf8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/gt/intel_ring.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/gt/intel_ring.c
+++ b/drivers/gpu/drm/i915/gt/intel_ring.c
@@ -116,7 +116,7 @@ static struct i915_vma *create_ring_vma(
obj = i915_gem_object_create_lmem(i915, size, I915_BO_ALLOC_VOLATILE |
I915_BO_ALLOC_PM_VOLATILE);
- if (IS_ERR(obj) && i915_ggtt_has_aperture(ggtt))
+ if (IS_ERR(obj) && i915_ggtt_has_aperture(ggtt) && !HAS_LLC(i915))
obj = i915_gem_object_create_stolen(i915, size);
if (IS_ERR(obj))
obj = i915_gem_object_create_internal(i915, size);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [Intel-gfx] [PATCH 6.1 881/885] drm/i915: Dont use stolen memory for ring buffers with LLC
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
0 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Jani Nikula, Greg Kroah-Hartman, intel-gfx, patches,
Chris Wilson, Rodrigo Vivi
From: John Harrison <John.C.Harrison@Intel.com>
commit 690e0ec8e63da9a29b39fedc6ed5da09c7c82651 upstream.
Direction from hardware is that stolen memory should never be used for
ring buffer allocations on platforms with LLC. There are too many
caching pitfalls due to the way stolen memory accesses are routed. So
it is safest to just not use it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: c58b735fc762 ("drm/i915: Allocate rings from stolen")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-2-John.C.Harrison@Intel.com
(cherry picked from commit f54c1f6c697c4297f7ed94283c184acc338a5cf8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/gt/intel_ring.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/gt/intel_ring.c
+++ b/drivers/gpu/drm/i915/gt/intel_ring.c
@@ -116,7 +116,7 @@ static struct i915_vma *create_ring_vma(
obj = i915_gem_object_create_lmem(i915, size, I915_BO_ALLOC_VOLATILE |
I915_BO_ALLOC_PM_VOLATILE);
- if (IS_ERR(obj) && i915_ggtt_has_aperture(ggtt))
+ if (IS_ERR(obj) && i915_ggtt_has_aperture(ggtt) && !HAS_LLC(i915))
obj = i915_gem_object_create_stolen(i915, size);
if (IS_ERR(obj))
obj = i915_gem_object_create_internal(i915, size);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 882/885] drm/i915: Dont use BAR mappings for ring buffers with LLC
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 002/885] HID: asus: use spinlock to safely schedule workers Greg Kroah-Hartman
` (886 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Harrison, Chris Wilson,
Joonas Lahtinen, Jani Nikula, Rodrigo Vivi, Tvrtko Ursulin,
intel-gfx, Jouni Högander, Daniele Ceraolo Spurio,
Jani Nikula
From: John Harrison <John.C.Harrison@Intel.com>
commit 85636167e3206c3fbd52254fc432991cc4e90194 upstream.
Direction from hardware is that ring buffers should never be mapped
via the BAR on systems with LLC. There are too many caching pitfalls
due to the way BAR accesses are routed. So it is safest to just not
use it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: 9d80841ea4c9 ("drm/i915: Allow ringbuffers to be bound anywhere")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-3-John.C.Harrison@Intel.com
(cherry picked from commit 65c08339db1ada87afd6cfe7db8e60bb4851d919)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/gt/intel_ring.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/gt/intel_ring.c
+++ b/drivers/gpu/drm/i915/gt/intel_ring.c
@@ -53,7 +53,7 @@ int intel_ring_pin(struct intel_ring *ri
if (unlikely(ret))
goto err_unpin;
- if (i915_vma_is_map_and_fenceable(vma)) {
+ if (i915_vma_is_map_and_fenceable(vma) && !HAS_LLC(vma->vm->i915)) {
addr = (void __force *)i915_vma_pin_iomap(vma);
} else {
int type = i915_coherent_map_type(vma->vm->i915, vma->obj, false);
@@ -98,7 +98,7 @@ void intel_ring_unpin(struct intel_ring
return;
i915_vma_unset_ggtt_write(vma);
- if (i915_vma_is_map_and_fenceable(vma))
+ if (i915_vma_is_map_and_fenceable(vma) && !HAS_LLC(vma->vm->i915))
i915_vma_unpin_iomap(vma);
else
i915_gem_object_unpin_map(vma->obj);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [Intel-gfx] [PATCH 6.1 882/885] drm/i915: Dont use BAR mappings for ring buffers with LLC
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
0 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Jani Nikula, Greg Kroah-Hartman, intel-gfx, patches,
Chris Wilson, Rodrigo Vivi
From: John Harrison <John.C.Harrison@Intel.com>
commit 85636167e3206c3fbd52254fc432991cc4e90194 upstream.
Direction from hardware is that ring buffers should never be mapped
via the BAR on systems with LLC. There are too many caching pitfalls
due to the way BAR accesses are routed. So it is safest to just not
use it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: 9d80841ea4c9 ("drm/i915: Allow ringbuffers to be bound anywhere")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-3-John.C.Harrison@Intel.com
(cherry picked from commit 65c08339db1ada87afd6cfe7db8e60bb4851d919)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/gt/intel_ring.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/gt/intel_ring.c
+++ b/drivers/gpu/drm/i915/gt/intel_ring.c
@@ -53,7 +53,7 @@ int intel_ring_pin(struct intel_ring *ri
if (unlikely(ret))
goto err_unpin;
- if (i915_vma_is_map_and_fenceable(vma)) {
+ if (i915_vma_is_map_and_fenceable(vma) && !HAS_LLC(vma->vm->i915)) {
addr = (void __force *)i915_vma_pin_iomap(vma);
} else {
int type = i915_coherent_map_type(vma->vm->i915, vma->obj, false);
@@ -98,7 +98,7 @@ void intel_ring_unpin(struct intel_ring
return;
i915_vma_unset_ggtt_write(vma);
- if (i915_vma_is_map_and_fenceable(vma))
+ if (i915_vma_is_map_and_fenceable(vma) && !HAS_LLC(vma->vm->i915))
i915_vma_unpin_iomap(vma);
else
i915_gem_object_unpin_map(vma->obj);
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 883/885] drm/gud: Fix UBSAN warning
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (881 preceding siblings ...)
2023-03-07 17:03 ` [Intel-gfx] " Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 884/885] drm/edid: fix AVI infoframe aspect ratio handling Greg Kroah-Hartman
` (4 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Javier Martinez Canillas,
Thomas Zimmermann, Noralf Trønnes
From: Noralf Trønnes <noralf@tronnes.org>
commit 951df98024f7272f85df5044eca7374f5b5b24ef upstream.
UBSAN complains about invalid value for bool:
[ 101.165172] [drm] Initialized gud 1.0.0 20200422 for 2-3.2:1.0 on minor 1
[ 101.213360] gud 2-3.2:1.0: [drm] fb1: guddrmfb frame buffer device
[ 101.213426] usbcore: registered new interface driver gud
[ 101.989431] ================================================================================
[ 101.989441] UBSAN: invalid-load in linux/include/linux/iosys-map.h:253:9
[ 101.989447] load of value 121 is not a valid value for type '_Bool'
[ 101.989451] CPU: 1 PID: 455 Comm: kworker/1:6 Not tainted 5.18.0-rc5-gud-5.18-rc5 #3
[ 101.989456] Hardware name: Hewlett-Packard HP EliteBook 820 G1/1991, BIOS L71 Ver. 01.44 04/12/2018
[ 101.989459] Workqueue: events_long gud_flush_work [gud]
[ 101.989471] Call Trace:
[ 101.989474] <TASK>
[ 101.989479] dump_stack_lvl+0x49/0x5f
[ 101.989488] dump_stack+0x10/0x12
[ 101.989493] ubsan_epilogue+0x9/0x3b
[ 101.989498] __ubsan_handle_load_invalid_value.cold+0x44/0x49
[ 101.989504] dma_buf_vmap.cold+0x38/0x3d
[ 101.989511] ? find_busiest_group+0x48/0x300
[ 101.989520] drm_gem_shmem_vmap+0x76/0x1b0 [drm_shmem_helper]
[ 101.989528] drm_gem_shmem_object_vmap+0x9/0xb [drm_shmem_helper]
[ 101.989535] drm_gem_vmap+0x26/0x60 [drm]
[ 101.989594] drm_gem_fb_vmap+0x47/0x150 [drm_kms_helper]
[ 101.989630] gud_prep_flush+0xc1/0x710 [gud]
[ 101.989639] ? _raw_spin_lock+0x17/0x40
[ 101.989648] gud_flush_work+0x1e0/0x430 [gud]
[ 101.989653] ? __switch_to+0x11d/0x470
[ 101.989664] process_one_work+0x21f/0x3f0
[ 101.989673] worker_thread+0x200/0x3e0
[ 101.989679] ? rescuer_thread+0x390/0x390
[ 101.989684] kthread+0xfd/0x130
[ 101.989690] ? kthread_complete_and_exit+0x20/0x20
[ 101.989696] ret_from_fork+0x22/0x30
[ 101.989706] </TASK>
[ 101.989708] ================================================================================
The source of this warning is in iosys_map_clear() called from
dma_buf_vmap(). It conditionally sets values based on map->is_iomem. The
iosys_map variables are allocated uninitialized on the stack leading to
->is_iomem having all kinds of values and not only 0/1.
Fix this by zeroing the iosys_map variables.
Fixes: 40e1a70b4aed ("drm: Add GUD USB Display driver")
Cc: <stable@vger.kernel.org> # v5.18+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122-gud-shadow-plane-v2-1-435037990a83@tronnes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/gud/gud_pipe.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/gud/gud_pipe.c
+++ b/drivers/gpu/drm/gud/gud_pipe.c
@@ -157,8 +157,8 @@ static int gud_prep_flush(struct gud_dev
{
struct dma_buf_attachment *import_attach = fb->obj[0]->import_attach;
u8 compression = gdrm->compression;
- struct iosys_map map[DRM_FORMAT_MAX_PLANES];
- struct iosys_map map_data[DRM_FORMAT_MAX_PLANES];
+ struct iosys_map map[DRM_FORMAT_MAX_PLANES] = { };
+ struct iosys_map map_data[DRM_FORMAT_MAX_PLANES] = { };
struct iosys_map dst;
void *vaddr, *buf;
size_t pitch, len;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 884/885] drm/edid: fix AVI infoframe aspect ratio handling
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (882 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 883/885] drm/gud: Fix UBSAN warning Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 885/885] drm/edid: fix parsing of 3D modes from HDMI VSDB Greg Kroah-Hartman
` (3 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, William Tseng,
Ville Syrjälä,
Jani Nikula
From: Jani Nikula <jani.nikula@intel.com>
commit 1cbc1f0d324ba6c4d1b10ac6362b5e0b029f63d5 upstream.
We try to avoid sending VICs defined in the later specs in AVI
infoframes to sinks that conform to the earlier specs, to not upset
them, and use 0 for the VIC instead. However, we do this detection and
conversion to 0 too early, as we'll need the actual VIC to figure out
the aspect ratio.
In particular, for a mode with 64:27 aspect ratio, 0 for VIC fails the
AVI infoframe generation altogether with -EINVAL.
Separate the VIC lookup from the "filtering", and postpone the
filtering, to use the proper VIC for aspect ratio handling, and the 0
VIC for the infoframe video code as needed.
Reported-by: William Tseng <william.tseng@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6153
Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3e78cc6d01ed237f71ad0038826b08d83d75eef.1672826282.git.jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/drm_edid.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -6705,8 +6705,6 @@ static u8 drm_mode_hdmi_vic(const struct
static u8 drm_mode_cea_vic(const struct drm_connector *connector,
const struct drm_display_mode *mode)
{
- u8 vic;
-
/*
* HDMI spec says if a mode is found in HDMI 1.4b 4K modes
* we should send its VIC in vendor infoframes, else send the
@@ -6716,13 +6714,18 @@ static u8 drm_mode_cea_vic(const struct
if (drm_mode_hdmi_vic(connector, mode))
return 0;
- vic = drm_match_cea_mode(mode);
+ return drm_match_cea_mode(mode);
+}
- /*
- * HDMI 1.4 VIC range: 1 <= VIC <= 64 (CEA-861-D) but
- * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we
- * have to make sure we dont break HDMI 1.4 sinks.
- */
+/*
+ * Avoid sending VICs defined in HDMI 2.0 in AVI infoframes to sinks that
+ * conform to HDMI 1.4.
+ *
+ * HDMI 1.4 (CTA-861-D) VIC range: [1..64]
+ * HDMI 2.0 (CTA-861-F) VIC range: [1..107]
+ */
+static u8 vic_for_avi_infoframe(const struct drm_connector *connector, u8 vic)
+{
if (!is_hdmi2_sink(connector) && vic > 64)
return 0;
@@ -6798,7 +6801,7 @@ drm_hdmi_avi_infoframe_from_display_mode
picture_aspect = HDMI_PICTURE_ASPECT_NONE;
}
- frame->video_code = vic;
+ frame->video_code = vic_for_avi_infoframe(connector, vic);
frame->picture_aspect = picture_aspect;
frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
^ permalink raw reply [flat|nested] 899+ messages in thread
* [PATCH 6.1 885/885] drm/edid: fix parsing of 3D modes from HDMI VSDB
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (883 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 884/885] drm/edid: fix AVI infoframe aspect ratio handling Greg Kroah-Hartman
@ 2023-03-07 17:03 ` Greg Kroah-Hartman
2023-03-07 20:54 ` [PATCH 6.1 000/885] 6.1.16-rc1 review Conor Dooley
` (2 subsequent siblings)
887 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-07 17:03 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Ville Syrjälä, Jani Nikula
From: Jani Nikula <jani.nikula@intel.com>
commit 72794d16bd535a984e6653a18f5862405b49b5f9 upstream.
Commit 537d9ed2f6c1 ("drm/edid: convert add_cea_modes() to use cea db
iter") inadvertently moved the do_hdmi_vsdb_modes() call within the db
iteration loop, always passing NULL as the CTA VDB to
do_hdmi_vsdb_modes(), skipping a lot of stereo modes.
Move the call back outside of the loop.
This does mean only one CTA VDB and HDMI VSDB combination will be
handled, but it's an unlikely scenario to have more than one of either
block, and it was not accounted for before the regression either.
Fixes: 537d9ed2f6c1 ("drm/edid: convert add_cea_modes() to use cea db iter")
Cc: <stable@vger.kernel.org> # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf159b8816191ed595a3cb954acaf189c4528cc7.1672826282.git.jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/drm_edid.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -5093,13 +5093,12 @@ static int add_cea_modes(struct drm_conn
{
const struct cea_db *db;
struct cea_db_iter iter;
+ const u8 *hdmi = NULL, *video = NULL;
+ u8 hdmi_len = 0, video_len = 0;
int modes = 0;
cea_db_iter_edid_begin(drm_edid, &iter);
cea_db_iter_for_each(db, &iter) {
- const u8 *hdmi = NULL, *video = NULL;
- u8 hdmi_len = 0, video_len = 0;
-
if (cea_db_tag(db) == CTA_DB_VIDEO) {
video = cea_db_data(db);
video_len = cea_db_payload_len(db);
@@ -5115,18 +5114,17 @@ static int add_cea_modes(struct drm_conn
modes += do_y420vdb_modes(connector, vdb420,
cea_db_payload_len(db) - 1);
}
-
- /*
- * We parse the HDMI VSDB after having added the cea modes as we
- * will be patching their flags when the sink supports stereo
- * 3D.
- */
- if (hdmi)
- modes += do_hdmi_vsdb_modes(connector, hdmi, hdmi_len,
- video, video_len);
}
cea_db_iter_end(&iter);
+ /*
+ * We parse the HDMI VSDB after having added the cea modes as we will be
+ * patching their flags when the sink supports stereo 3D.
+ */
+ if (hdmi)
+ modes += do_hdmi_vsdb_modes(connector, hdmi, hdmi_len,
+ video, video_len);
+
return modes;
}
^ permalink raw reply [flat|nested] 899+ messages in thread
* RE: [6.1,213/885] Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds
2023-03-07 16:52 ` [PATCH 6.1 213/885] Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds Greg Kroah-Hartman
@ 2023-03-07 18:55 ` bluez.test.bot
0 siblings, 0 replies; 899+ messages in thread
From: bluez.test.bot @ 2023-03-07 18:55 UTC (permalink / raw)
To: linux-bluetooth, gregkh
[-- Attachment #1: Type: text/plain, Size: 551 bytes --]
This is an automated email and please do not reply to this email.
Dear Submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
While preparing the CI tests, the patches you submitted couldn't be applied to the current HEAD of the repository.
----- Output -----
error: patch failed: net/bluetooth/hci_conn.c:1983
error: net/bluetooth/hci_conn.c: patch does not apply
hint: Use 'git am --show-current-patch' to see the failed patch
Please resolve the issue and submit the patches again.
---
Regards,
Linux Bluetooth
^ permalink raw reply [flat|nested] 899+ messages in thread
* Re: [PATCH 6.1 788/885] ext4: Fix possible corruption when moving a directory
2023-03-07 17:02 ` [PATCH 6.1 788/885] ext4: Fix possible corruption when moving a directory Greg Kroah-Hartman
@ 2023-03-07 19:23 ` Eric Biggers
2023-03-08 7:17 ` Greg Kroah-Hartman
0 siblings, 1 reply; 899+ messages in thread
From: Eric Biggers @ 2023-03-07 19:23 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: stable, patches, Jan Kara, Theodore Tso, linux-ext4
On Tue, Mar 07, 2023 at 06:02:02PM +0100, Greg Kroah-Hartman wrote:
> From: Jan Kara <jack@suse.cz>
>
> commit 0813299c586b175d7edb25f56412c54b812d0379 upstream.
>
> When we are renaming a directory to a different directory, we need to
> update '..' entry in the moved directory. However nothing prevents moved
> directory from being modified and even converted from the inline format
> to the normal format. When such race happens the rename code gets
> confused and we crash. Fix the problem by locking the moved directory.
>
> CC: stable@vger.kernel.org
> Fixes: 32f7f22c0b52 ("ext4: let ext4_rename handle inline dir")
> Signed-off-by: Jan Kara <jack@suse.cz>
> Link: https://lore.kernel.org/r/20230126112221.11866-1-jack@suse.cz
> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit has a reported regression
(https://lore.kernel.org/linux-ext4/5efbe1b9-ad8b-4a4f-b422-24824d2b775c@kili.mountain),
so probably it should not be backported quite yet.
- Eric
^ permalink raw reply [flat|nested] 899+ messages in thread
* Re: [PATCH 6.1 000/885] 6.1.16-rc1 review
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (884 preceding siblings ...)
2023-03-07 17:03 ` [PATCH 6.1 885/885] drm/edid: fix parsing of 3D modes from HDMI VSDB Greg Kroah-Hartman
@ 2023-03-07 20:54 ` Conor Dooley
2023-03-08 4:20 ` Bagas Sanjaya
2023-03-08 4:29 ` Daniel Díaz
887 siblings, 0 replies; 899+ messages in thread
From: Conor Dooley @ 2023-03-07 20:54 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow
[-- Attachment #1: Type: text/plain, Size: 404 bytes --]
On Tue, Mar 07, 2023 at 05:48:54PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.16 release.
> There are 885 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
My CI reports nothing untoward..
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Thanks,
Conor.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 899+ messages in thread
* Re: [PATCH 6.1 000/885] 6.1.16-rc1 review
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (885 preceding siblings ...)
2023-03-07 20:54 ` [PATCH 6.1 000/885] 6.1.16-rc1 review Conor Dooley
@ 2023-03-08 4:20 ` Bagas Sanjaya
2023-03-08 4:29 ` Daniel Díaz
887 siblings, 0 replies; 899+ messages in thread
From: Bagas Sanjaya @ 2023-03-08 4:20 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee, srw,
rwarsow
[-- Attachment #1: Type: text/plain, Size: 538 bytes --]
On Tue, Mar 07, 2023 at 05:48:54PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.16 release.
> There are 885 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
Successfully cross-compiled for arm64 (bcm2711_defconfig, GCC 10.2.0) and
powerpc (ps3_defconfig, GCC 12.2.0).
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
--
An old man doll... just what I always wanted! - Clara
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 899+ messages in thread
* Re: [PATCH 6.1 000/885] 6.1.16-rc1 review
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
` (886 preceding siblings ...)
2023-03-08 4:20 ` Bagas Sanjaya
@ 2023-03-08 4:29 ` Daniel Díaz
887 siblings, 0 replies; 899+ messages in thread
From: Daniel Díaz @ 2023-03-08 4:29 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee, srw,
rwarsow, pali, christophe.leroy, mpe
Hello!
On 07/03/23 10:48, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.16 release.
> There are 885 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 09 Mar 2023 16:57:34 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.16-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Same regression with PowerPC's ppc64e_defconfig, using GCC 8 and GCC 12, as reported with 6.2
-----8<-----
powerpc64le-linux-gnu-gcc: error: missing argument to '-mcpu='
powerpc64le-linux-gnu-gcc: error: missing argument to '-mcpu='
make[2]: *** [/builds/linux/arch/powerpc/boot/Makefile:237: arch/powerpc/boot/crt0.o] Error 1
make[2]: *** [/builds/linux/arch/powerpc/boot/Makefile:237: arch/powerpc/boot/crtsavres.o] Error 1
powerpc64le-linux-gnu-gcc: error: missing argument to '-mcpu='
make[2]: *** [/builds/linux/arch/powerpc/boot/Makefile:235: arch/powerpc/boot/cuboot.o] Error 1
[...]
make[2]: Target 'arch/powerpc/boot/zImage' not remade because of errors.
make[1]: *** [/builds/linux/arch/powerpc/Makefile:247: zImage] Error 2
make[1]: Target '__all' not remade because of errors.
make: *** [Makefile:242: __sub-make] Error 2
make: Target '__all' not remade because of errors.
----->8-----
Bisection points to "powerpc/boot: Don't always pass -mcpu=powerpc when building 32-bit uImage" (upstream ff7c76f66d8bad4e694c264c789249e1d3a8205d).
Reproducer:
tuxmake \
--runtime podman \
--target-arch powerpc \
--toolchain gcc-8 \
--kconfig ppc64e_defconfig \
config debugkernel dtbs kernel modules xipkernel
Greetings!
Daniel Díaz
daniel.diaz@linaro.org
^ permalink raw reply [flat|nested] 899+ messages in thread
* Re: [PATCH 6.1 788/885] ext4: Fix possible corruption when moving a directory
2023-03-07 19:23 ` Eric Biggers
@ 2023-03-08 7:17 ` Greg Kroah-Hartman
0 siblings, 0 replies; 899+ messages in thread
From: Greg Kroah-Hartman @ 2023-03-08 7:17 UTC (permalink / raw)
To: Eric Biggers; +Cc: stable, patches, Jan Kara, Theodore Tso, linux-ext4
On Tue, Mar 07, 2023 at 07:23:10PM +0000, Eric Biggers wrote:
> On Tue, Mar 07, 2023 at 06:02:02PM +0100, Greg Kroah-Hartman wrote:
> > From: Jan Kara <jack@suse.cz>
> >
> > commit 0813299c586b175d7edb25f56412c54b812d0379 upstream.
> >
> > When we are renaming a directory to a different directory, we need to
> > update '..' entry in the moved directory. However nothing prevents moved
> > directory from being modified and even converted from the inline format
> > to the normal format. When such race happens the rename code gets
> > confused and we crash. Fix the problem by locking the moved directory.
> >
> > CC: stable@vger.kernel.org
> > Fixes: 32f7f22c0b52 ("ext4: let ext4_rename handle inline dir")
> > Signed-off-by: Jan Kara <jack@suse.cz>
> > Link: https://lore.kernel.org/r/20230126112221.11866-1-jack@suse.cz
> > Signed-off-by: Theodore Ts'o <tytso@mit.edu>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> This commit has a reported regression
> (https://lore.kernel.org/linux-ext4/5efbe1b9-ad8b-4a4f-b422-24824d2b775c@kili.mountain),
> so probably it should not be backported quite yet.
Thanks, I've dropped it from everywhere now. Please let us know when
it's safe to add back to the tree.
greg k-h
^ permalink raw reply [flat|nested] 899+ messages in thread
end of thread, other threads:[~2023-03-08 7:17 UTC | newest]
Thread overview: 899+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-07 16:48 [PATCH 6.1 000/885] 6.1.16-rc1 review Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 001/885] HID: asus: use spinlock to protect concurrent accesses Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 002/885] HID: asus: use spinlock to safely schedule workers Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 003/885] powerpc/mm: Rearrange if-else block to avoid clang warning Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 004/885] ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller" Greg Kroah-Hartman
2023-03-07 16:48 ` [PATCH 6.1 005/885] ARM: OMAP2+: Fix memory leak in realtime_counter_init() Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 006/885] arm64: dts: qcom: qcs404: use symbol names for PCIe resets Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 007/885] arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 008/885] arm64: dts: qcom: sm8150-kumano: Panel framebuffer is 2.5k instead of 4k Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 009/885] arm64: dts: qcom: sm6350: Fix up the ramoops node Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 010/885] arm64: dts: qcom: sm6125: Reorder HSUSB PHY clocks to match bindings Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 011/885] arm64: dts: qcom: sm6125-seine: Clean up gpio-keys (volume down) Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 012/885] arm64: dts: imx8m: Align SoC unique ID node unit address Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 013/885] ARM: zynq: Fix refcount leak in zynq_early_slcr_init Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 014/885] arm64: dts: mediatek: mt8195: Add power domain to U3PHY1 T-PHY Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 015/885] arm64: dts: mediatek: mt8183: Fix systimer 13 MHz clock description Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 016/885] arm64: dts: mediatek: mt8192: " Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 017/885] arm64: dts: mediatek: mt8195: " Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 018/885] arm64: dts: mediatek: mt8186: " Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 019/885] arm64: dts: qcom: sdm845-db845c: fix audio codec interrupt pin name Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 020/885] x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 021/885] arm64: dts: qcom: sc7180: correct SPMI bus address cells Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 022/885] arm64: dts: qcom: sc7280: " Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 023/885] arm64: dts: qcom: sc8280xp: " Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 024/885] arm64: dts: qcom: sc8280xp: Vote for CX in USB controllers Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 025/885] arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 026/885] arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 027/885] arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 028/885] arm64: dts: meson-gx: Fix Ethernet MAC address unit name Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 029/885] arm64: dts: meson-g12a: Fix internal Ethernet PHY " Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 030/885] arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 031/885] cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again* Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 032/885] arm64: dts: ti: k3-am62: Enable SPI nodes at the board level Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 033/885] arm64: dts: ti: k3-am62-main: Fix clocks for McSPI Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 034/885] arm64: tegra: Fix duplicate regulator on Jetson TX1 Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 035/885] arm64: dts: msm8992-bullhead: add memory hole region Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 036/885] arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 037/885] arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_mem Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 038/885] arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 039/885] arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 040/885] arm64: dts: qcom: ipq8074: fix Gen3 " Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 041/885] arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 042/885] arm64: dts: qcom: ipq8074: fix Gen3 PCIe node Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 043/885] arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 044/885] arm64: dts: meson: remove CPU opps below 1GHz for G12A boards Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 045/885] ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init() Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 046/885] arm64: dts: mediatek: mt8192: Mark scp_adsp clock as broken Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 047/885] ARM: bcm2835_defconfig: Enable the framebuffer Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 048/885] ARM: s3c: fix s3c64xx_set_timer_source prototype Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 049/885] arm64: dts: ti: k3-j7200: Fix wakeup pinmux range Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 050/885] ARM: dts: exynos: correct wr-active property in Exynos3250 Rinato Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 051/885] ARM: imx: Call ida_simple_remove() for ida_simple_get Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 052/885] arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 053/885] arm64: dts: amlogic: meson-axg: " Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 054/885] arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 055/885] arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix supply name of USB controller node Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 056/885] arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names property Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 057/885] arm64: dts: amlogic: meson-gx: add missing unit address to rng node name Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 058/885] arm64: dts: amlogic: meson-gxl-s905w-jethome-jethub-j80: fix invalid rtc " Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 059/885] arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: " Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 060/885] arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux " Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 061/885] arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 062/885] arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 063/885] arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 064/885] arm64: dts: amlogic: meson-gxbb-kii-pro: " Greg Kroah-Hartman
2023-03-07 16:49 ` [PATCH 6.1 065/885] arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 066/885] locking/rwsem: Disable preemption in all down_read*() and up_read() code paths Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 067/885] arm64: dts: renesas: beacon-renesom: Fix gpio expander reference Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 068/885] arm64: dts: meson: radxa-zero: allow usb otg mode Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 069/885] arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 070/885] ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 071/885] ublk_drv: remove nr_aborted_queues from ublk_device Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 072/885] ublk_drv: dont probe partitions if the ubq daemon isnt trusted Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 073/885] ARM: dts: imx7s: correct iomuxc gpr mux controller cells Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 074/885] sbitmap: remove redundant check in __sbitmap_queue_get_batch Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 075/885] sbitmap: Use single per-bitmap counting to wake up queued tags Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 076/885] sbitmap: correct wake_batch recalculation to avoid potential IO hung Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 077/885] arm64: dts: mt8195: Fix CPU map for single-cluster SoC Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 078/885] arm64: dts: mt8192: " Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 079/885] arm64: dts: mt8186: " Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 080/885] arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 081/885] arm64: dts: mediatek: mt8186: Fix watchdog compatible Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 082/885] arm64: dts: mediatek: mt8195: " Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 083/885] arm64: dts: mediatek: mt7986: " Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 084/885] ARM: dts: stm32: Update part number NVMEM description on stm32mp131 Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 085/885] blk-mq: avoid sleep in blk_mq_alloc_request_hctx Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 086/885] blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 087/885] blk-mq: wait on correct sbitmap_queue in blk_mq_mark_tag_wait Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 088/885] blk-mq: Fix potential io hung for shared sbitmap per tagset Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 089/885] blk-mq: correct stale comment of .get_budget Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 090/885] arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 091/885] arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 092/885] arm64: dts: qcom: sm8350: drop incorrect cells from serial Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 093/885] arm64: dts: qcom: sm8450: " Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 094/885] arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 095/885] arm64: dts: qcom: msm8953: correct TLMM gpio-ranges Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 096/885] arm64: dts: qcom: msm8992-*: Fix up comments Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 097/885] arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 098/885] s390/dasd: Fix potential memleak in dasd_eckd_init() Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 099/885] sched/rt: pick_next_rt_entity(): check list_entry Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 100/885] perf/x86/intel/ds: Fix the conversion from TSC to perf time Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 101/885] x86/perf/zhaoxin: Add stepping check for ZXC Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 102/885] KEYS: asymmetric: Fix ECDSA use via keyctl uapi Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 103/885] block: ublk: check IO buffer based on flag need_get_data Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 104/885] arm64: dts: qcom: pmk8350: Specify PBS register for PON Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 105/885] arm64: dts: qcom: pmk8350: Use the correct PON compatible Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 106/885] erofs: relinquish volume with mutex held Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 107/885] block: sync mixed merged requests failfast with 1st bios Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 108/885] block: Fix io statistics for cgroup in throttle path Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 109/885] block: bio-integrity: Copy flags when bio_integrity_payload is cloned Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 110/885] block: use proper return value from bio_failfast() Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 111/885] wifi: mt76: mt7915: add missing of_node_put() Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 112/885] wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 113/885] wifi: mt76: mt7915: check return value before accessing free_block_num Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 114/885] wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr() Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 115/885] wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read() Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 116/885] wifi: mt76: fix coverity uninit_use_in_call in mt76_connac2_reverse_frag0_hdr_trans() Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 117/885] wifi: rsi: Fix memory leak in rsi_coex_attach() Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 118/885] wifi: rtlwifi: rtl8821ae: dont call kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 119/885] wifi: rtlwifi: rtl8188ee: " Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 120/885] wifi: rtlwifi: rtl8723be: " Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 121/885] wifi: iwlegacy: common: dont call dev_kfree_skb() " Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 122/885] wifi: libertas: fix memory leak in lbs_init_adapter() Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 123/885] wifi: rtl8xxxu: dont call dev_kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 124/885] wifi: rtw89: 8852c: rfk: correct DACK setting Greg Kroah-Hartman
2023-03-07 16:50 ` [PATCH 6.1 125/885] wifi: rtw89: 8852c: rfk: correct DPK settings Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 126/885] wifi: rtlwifi: Fix global-out-of-bounds bug in _rtl8812ae_phy_set_txpower_limit() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 127/885] libbpf: Fix btf__align_of() by taking into account field offsets Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 128/885] wifi: ipw2x00: dont call dev_kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 129/885] wifi: ipw2200: fix memory leak in ipw_wdev_init() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 130/885] wifi: wilc1000: fix potential memory leak in wilc_mac_xmit() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 131/885] wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 132/885] wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 133/885] wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 134/885] wifi: libertas_tf: dont call kfree_skb() under spin_lock_irqsave() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 135/885] wifi: libertas: if_usb: " Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 136/885] wifi: libertas: main: " Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 137/885] wifi: libertas: cmdresp: " Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 138/885] wifi: wl3501_cs: " Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 139/885] libbpf: Fix invalid return address register in s390 Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 140/885] crypto: x86/ghash - fix unaligned access in ghash_setkey() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 141/885] ACPICA: Drop port I/O validation for some regions Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 142/885] genirq: Fix the return type of kstat_cpu_irqs_sum() Greg Kroah-Hartman
2023-03-07 16:51 ` Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 143/885] rcu-tasks: Improve comments explaining tasks_rcu_exit_srcu purpose Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 144/885] rcu-tasks: Remove preemption disablement around srcu_read_[un]lock() calls Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 145/885] rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 146/885] lib/mpi: Fix buffer overrun when SG is too long Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 147/885] crypto: ccp - Avoid page allocation failure warning for SEV_GET_ID2 Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 148/885] platform/chrome: cros_ec_typec: Update port DP VDO Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 149/885] ACPICA: nsrepair: handle cases without a return value correctly Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 150/885] selftests/xsk: print correct payload for packet dump Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 151/885] selftests/xsk: print correct error codes when exiting Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 152/885] arm64/cpufeature: Fix field sign for DIT hwcap detection Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 153/885] kselftest/arm64: Fix syscall-abi for systems without 128 bit SME Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 154/885] workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 155/885] s390/early: fix sclp_early_sccb variable lifetime Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 156/885] s390/vfio-ap: fix an error handling path in vfio_ap_mdev_probe_queue() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 157/885] x86/signal: Fix the value returned by strict_sas_size() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 158/885] thermal/drivers/tsens: Drop msm8976-specific defines Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 159/885] thermal/drivers/tsens: Sort out msm8976 vs msm8956 data Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 160/885] thermal/drivers/tsens: fix slope values for msm8939 Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 161/885] thermal/drivers/tsens: limit num_sensors to 9 " Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 162/885] wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 163/885] wifi: rtw89: Add missing check for alloc_workqueue Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 164/885] wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 165/885] wifi: orinoco: check return value of hermes_write_wordrec() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 166/885] thermal/drivers/imx_sc_thermal: Drop empty platform remove function Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 167/885] thermal/drivers/imx_sc_thermal: Fix the loop condition Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 168/885] wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 169/885] wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 170/885] wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 171/885] wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 172/885] wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 173/885] ACPI: battery: Fix missing NUL-termination with large strings Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 174/885] selftests/bpf: Fix build errors if CONFIG_NF_CONNTRACK=m Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 175/885] crypto: ccp - Failure on re-initialization due to duplicate sysfs filename Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 176/885] crypto: essiv - Handle EBUSY correctly Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 177/885] crypto: seqiv " Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 178/885] powercap: fix possible name leak in powercap_register_zone() Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 179/885] x86/microcode: Add a parameter to microcode_check() to store CPU capabilities Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 180/885] x86/microcode: Check CPU capabilities after late microcode update correctly Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 181/885] x86/microcode: Adjust late loading result reporting message Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 182/885] selftests/bpf: Use consistent build-id type for liburandom_read.so Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 183/885] selftests/bpf: Fix vmtest static compilation error Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 184/885] crypto: xts - Handle EBUSY correctly Greg Kroah-Hartman
2023-03-07 16:51 ` [PATCH 6.1 185/885] leds: led-class: Add missing put_device() to led_put() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 186/885] s390/bpf: Add expoline to tail calls Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 187/885] wifi: iwlwifi: mei: fix compilation errors in rfkill() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 188/885] kselftest/arm64: Fix enumeration of systems without 128 bit SME Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 189/885] can: rcar_canfd: Fix R-Car V3U GAFLCFG field accesses Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 190/885] selftests/bpf: Initialize tc in xdp_synproxy Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 191/885] crypto: ccp - Flush the SEV-ES TMR memory before giving it to firmware Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 192/885] bpftool: profile online CPUs instead of possible Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 193/885] wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 194/885] wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 195/885] wifi: mt76: mt7915: fix WED TxS reporting Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 196/885] wifi: mt76: add memory barrier to SDIO queue kick Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 197/885] wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 198/885] net/mlx5: Enhance debug print in page allocation failure Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 199/885] irqchip: Fix refcount leak in platform_irqchip_probe Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 200/885] irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 201/885] irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 202/885] irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 203/885] s390/mem_detect: fix detect_memory() error handling Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 204/885] s390/vmem: fix empty page tables cleanup under KASAN Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 205/885] s390/boot: cleanup decompressor header files Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 206/885] s390/mem_detect: rely on diag260() if sclp_early_get_memsize() fails Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 207/885] s390/boot: fix mem_detect extended area allocation Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 208/885] net: add sock_init_data_uid() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 209/885] tun: tun_chr_open(): correctly initialize socket uid Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 210/885] tap: tap_open(): " Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 211/885] OPP: fix error checking in opp_migrate_dentry() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 212/885] cpufreq: davinci: Fix clk use after free Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 213/885] Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds Greg Kroah-Hartman
2023-03-07 18:55 ` [6.1,213/885] " bluez.test.bot
2023-03-07 16:52 ` [PATCH 6.1 214/885] Bluetooth: L2CAP: Fix potential user-after-free Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 215/885] Bluetooth: hci_qca: get wakeup status from serdev device handle Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 216/885] net: ipa: generic command param fix Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 217/885] s390: vfio-ap: tighten the NIB validity check Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 218/885] s390/ap: fix status returned by ap_aqic() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 219/885] s390/ap: fix status returned by ap_qact() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 220/885] libbpf: Fix alen calculation in libbpf_nla_dump_errormsg() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 221/885] xen/grant-dma-iommu: Implement a dummy probe_device() callback Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 222/885] rds: rds_rm_zerocopy_callback() correct order for list_add_tail() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 223/885] crypto: rsa-pkcs1pad - Use akcipher_request_complete Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 224/885] m68k: /proc/hardware should depend on PROC_FS Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 225/885] RISC-V: time: initialize hrtimer based broadcast clock event device Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 226/885] clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 227/885] wifi: iwl3945: Add missing check for create_singlethread_workqueue Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 228/885] wifi: iwl4965: Add missing check for create_singlethread_workqueue() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 229/885] wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 230/885] selftests/bpf: Fix out-of-srctree build Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 231/885] ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 232/885] ACPI: resource: Do IRQ override on all TongFang GMxRGxx Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 233/885] crypto: octeontx2 - Fix objects shared between several modules Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 234/885] crypto: crypto4xx - Call dma_unmap_page when done Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 235/885] wifi: mac80211: move color collision detection report in a delayed work Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 236/885] wifi: mac80211: make rate u32 in sta_set_rate_info_rx() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 237/885] wifi: mac80211: fix non-MLO station association Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 238/885] wifi: mac80211: Dont translate MLD addresses for multicast Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 239/885] wifi: mac80211: avoid u32_encode_bits() warning Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 240/885] wifi: mac80211: fix off-by-one link setting Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 241/885] tools/lib/thermal: Fix thermal_sampling_exit() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 242/885] thermal/drivers/hisi: Drop second sensor hi3660 Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 243/885] selftests/bpf: Fix map_kptr test Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 244/885] wifi: mac80211: pass sta to ieee80211_rx_data_set_sta() Greg Kroah-Hartman
2023-03-07 16:52 ` [PATCH 6.1 245/885] bpf: Zeroing allocated object from slab in bpf memory allocator Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 246/885] selftests/bpf: Fix xdp_do_redirect on s390x Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 247/885] can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 248/885] can: esd_usb: Make use of can_change_state() and relocate checking skb for NULL Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 249/885] xsk: check IFF_UP earlier in Tx path Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 250/885] LoongArch, bpf: Use 4 instructions for function address in JIT Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 251/885] bpf: Fix global subprog context argument resolution logic Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 252/885] irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 253/885] irqchip/irq-bcm7120-l2: " Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 254/885] net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link() Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 255/885] net/smc: fix application data exception Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 256/885] selftests/net: Interpret UDP_GRO cmsg data as an int value Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 257/885] l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register() Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 258/885] net: bcmgenet: fix MoCA LED control Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 259/885] net: lan966x: Fix possible deadlock inside PTP Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 260/885] net/mlx4_en: Introduce flexible array to silence overflow warning Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 261/885] selftest: fib_tests: Always cleanup before exit Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 262/885] sefltests: netdevsim: wait for devlink instance after netns removal Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 263/885] drm: Fix potential null-ptr-deref due to drmm_mode_config_init() Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 264/885] drm/fourcc: Add missing big-endian XRGB1555 and RGB565 formats Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 265/885] drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match spec Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 266/885] drm: mxsfb: DRM_IMX_LCDIF should depend on ARCH_MXC Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 267/885] drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 268/885] drm/bridge: megachips: Fix error handling in i2c_register_driver() Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 269/885] drm/vkms: Fix memory leak in vkms_init() Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 270/885] drm/vkms: Fix null-ptr-deref in vkms_release() Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 271/885] drm/vc4: dpi: Fix format mapping for RGB565 Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 272/885] drm: tidss: Fix pixel format definition Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 273/885] gpu: ipu-v3: common: Add of_node_put() for reference returned by of_graph_get_port_by_id() Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 274/885] drm/vc4: drop all currently held locks if deadlock happens Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 275/885] hwmon: (ftsteutates) Fix scaling of measurements Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 276/885] drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init() Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 277/885] drm/msm/hdmi: Add missing check for alloc_ordered_workqueue Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 278/885] pinctrl: qcom: pinctrl-msm8976: Correct function names for wcss pins Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 279/885] pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 280/885] pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 281/885] drm/vc4: hvs: Set AXI panic modes Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 282/885] drm/vc4: hvs: SCALER_DISPBKGND_AUTOHS is only valid on HVS4 Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 283/885] drm/vc4: hvs: Correct interrupt masking bit assignment for HVS5 Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 284/885] drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5 Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 285/885] drm/vc4: hdmi: Correct interlaced timings again Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 286/885] drm/msm: clean event_thread->worker in case of an error Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 287/885] drm/panel-edp: fix name for IVO product id 854b Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 288/885] scsi: qla2xxx: Fix exchange oversubscription Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 289/885] scsi: qla2xxx: Fix exchange oversubscription for management commands Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 290/885] scsi: qla2xxx: edif: Fix clang warning Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 291/885] ASoC: fsl_sai: initialize is_dsp_mode flag Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 292/885] drm/bridge: tc358767: Set default CLRSIPO count Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 293/885] drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup() Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 294/885] ALSA: hda/ca0132: minor fix for allocation size Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 295/885] drm/amdgpu: Use the sched from entity for amdgpu_cs trace Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 296/885] drm/msm/gem: Add check for kmalloc Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 297/885] drm/msm/dpu: Disallow unallocated resources to be returned Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 298/885] drm/bridge: lt9611: fix sleep mode setup Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 299/885] drm/bridge: lt9611: fix HPD reenablement Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 300/885] drm/bridge: lt9611: fix polarity programming Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 301/885] drm/bridge: lt9611: fix programming of video modes Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 302/885] drm/bridge: lt9611: fix clock calculation Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 303/885] drm/bridge: lt9611: pass a pointer to the of node Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 304/885] regulator: tps65219: use IS_ERR() to detect an error pointer Greg Kroah-Hartman
2023-03-07 16:53 ` [PATCH 6.1 305/885] drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 306/885] drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 307/885] drm/msm/dsi: Allow 2 CTRLs on v2.5.0 Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 308/885] scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096 Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 309/885] drm/msm/dpu: sc7180: add missing WB2 clock control Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 310/885] drm/msm: use strscpy instead of strncpy Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 311/885] drm/msm/dpu: Add check for cstate Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 312/885] drm/msm/dpu: Add check for pstates Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 313/885] drm/msm/mdp5: Add check for kzalloc Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 314/885] habanalabs: bugs fixes in timestamps buff alloc Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 315/885] pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback() Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 316/885] pinctrl: mediatek: Initialize variable pullen and pullup to zero Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 317/885] pinctrl: mediatek: Initialize variable *buf " Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 318/885] gpu: host1x: Fix mask for syncpoint increment register Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 319/885] gpu: host1x: Dont skip assigning syncpoints to channels Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 320/885] drm/tegra: firewall: Check for is_addr_reg existence in IMM check Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 321/885] pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 322/885] drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update() Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 323/885] drm/mediatek: dsi: Reduce the time of dsi from LP11 to sending cmd Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 324/885] drm/mediatek: Use NULL instead of 0 for NULL pointer Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 325/885] drm/mediatek: Drop unbalanced obj unref Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 326/885] drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 327/885] drm/mediatek: Clean dangling pointer on bind error path Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 328/885] ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress() Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 329/885] dt-bindings: display: mediatek: Fix the fallback for mediatek,mt8186-disp-ccorr Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 330/885] gpio: vf610: connect GPIO label to dev name Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 331/885] ASoC: topology: Properly access value coming from topology file Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 332/885] spi: dw_bt1: fix MUX_MMIO dependencies Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 333/885] ASoC: mchp-spdifrx: fix controls which rely on rsr register Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 334/885] ASoC: mchp-spdifrx: fix return value in case completion times out Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 335/885] ASoC: mchp-spdifrx: fix controls that works with completion mechanism Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 336/885] ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove() Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 337/885] dm: improve shrinker debug names Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 338/885] regmap: apply reg_base and reg_downshift for single register ops Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 339/885] ASoC: rsnd: fixup #endif position Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 340/885] ASoC: mchp-spdifrx: Fix uninitialized use of mr in mchp_spdifrx_hw_params() Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 341/885] ASoC: dt-bindings: meson: fix gx-card codec node regex Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 342/885] regulator: tps65219: use generic set_bypass() Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 343/885] hwmon: (asus-ec-sensors) add missing mutex path Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 344/885] hwmon: (ltc2945) Handle error case in ltc2945_value_store Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 345/885] ALSA: hda: Fix the control element identification for multiple codecs Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 346/885] drm/amdgpu: fix enum odm_combine_mode mismatch Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 347/885] scsi: mpt3sas: Fix a memory leak Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 348/885] scsi: aic94xx: Add missing check for dma_map_single() Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 349/885] HID: multitouch: Add quirks for flipped axes Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 350/885] HID: retain initial quirks set up when creating HID devices Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 351/885] ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 352/885] ASoC: qcom: q6apm-dai: fix race condition while updating the position pointer Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 353/885] ASoC: qcom: q6apm-dai: Add SNDRV_PCM_INFO_BATCH flag Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 354/885] ASoC: codecs: lpass: register mclk after runtime pm Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 355/885] ASoC: codecs: lpass: fix incorrect mclk rate Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 356/885] spi: bcm63xx-hsspi: Endianness fix for ARM based SoC Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 357/885] drm/amd/display: dont call dc_interrupt_set() for disabled crtcs Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 358/885] HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 359/885] spi: bcm63xx-hsspi: Fix multi-bit mode setting Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 360/885] hwmon: (mlxreg-fan) Return zero speed for broken fan Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 361/885] ASoC: tlv320adcx140: fix ti,gpio-config DT property init Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 362/885] dm: remove flush_scheduled_work() during local_exit() Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 363/885] nfs4trace: fix state manager flag printing Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 364/885] NFS: fix disabling of swap Greg Kroah-Hartman
2023-03-07 16:54 ` [PATCH 6.1 365/885] spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one() Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 366/885] ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 367/885] HID: bigben: use spinlock to protect concurrent accesses Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 368/885] HID: bigben_worker() remove unneeded check on report_field Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 369/885] HID: bigben: use spinlock to safely schedule workers Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 370/885] hid: bigben_probe(): validate report count Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 371/885] ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 372/885] drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 373/885] NFSD: enhance inter-server copy cleanup Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 374/885] NFSD: fix leaked reference count of nfsd4_ssc_umount_item Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 375/885] nfsd: fix race to check ls_layouts Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 376/885] nfsd: clean up potential nfsd_file refcount leaks in COPY codepath Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 377/885] NFSD: fix problems with cleanup on errors in nfsd4_copy Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 378/885] nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 379/885] nfsd: dont fsync nfsd_files on last close Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 380/885] NFSD: copy the whole verifier in nfsd_copy_write_verifier Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 381/885] cifs: Fix lost destroy smbd connection when MR allocate failed Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 382/885] cifs: Fix warning and UAF when destroy the MR list Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 383/885] cifs: use tcon allocation functions even for dummy tcon Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 384/885] gfs2: jdata writepage fix Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 385/885] perf llvm: Fix inadvertent file creation Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 386/885] leds: led-core: Fix refcount leak in of_led_get() Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 387/885] leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest() Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 388/885] leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 389/885] tools/tracing/rtla: osnoise_hist: use total duration for average calculation Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 390/885] perf inject: Use perf_data__read() for auxtrace Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 391/885] perf intel-pt: Do not try to queue auxtrace data on pipe Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 392/885] perf test bpf: Skip test if kernel-debuginfo is not present Greg Kroah-Hartman
2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 393/885] perf tools: Fix auto-complete on aarch64 Greg Kroah-Hartman
2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 394/885] sparc: allow PM configs for sparc32 COMPILE_TEST Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 395/885] selftests: find echo binary to use -ne options Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 396/885] selftests/ftrace: Fix bash specific "==" operator Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 397/885] selftests: use printf instead of echo -ne Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 398/885] perf record: Fix segfault with --overwrite and --max-size Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 399/885] printf: fix errname.c list Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 400/885] perf tests stat_all_metrics: Change true workload to sleep workload for system wide check Greg Kroah-Hartman
2023-03-07 16:55 ` Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 401/885] objtool: add UACCESS exceptions for __tsan_volatile_read/write Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 402/885] mfd: cs5535: Dont build on UML Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 403/885] mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read() Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 404/885] dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0 Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 405/885] RDMA/erdma: Fix refcount leak in erdma_mmap Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 406/885] dmaengine: HISI_DMA should depend on ARCH_HISI Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 407/885] RDMA/hns: Fix refcount leak in hns_roce_mmap Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 408/885] iio: light: tsl2563: Do not hardcode interrupt trigger type Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 409/885] usb: gadget: fusb300_udc: free irq on the error path in fusb300_probe() Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 410/885] i2c: designware: fix i2c_dw_clk_rate() return size to be u32 Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 411/885] soundwire: cadence: Dont overflow the command FIFOs Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 412/885] driver core: fix potential null-ptr-deref in device_add() Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 413/885] kobject: modify kobject_get_path() to take a const * Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 414/885] kobject: Fix slab-out-of-bounds in fill_kobj_path() Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 415/885] alpha/boot/tools/objstrip: fix the check for ELF header Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 416/885] media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible() Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 417/885] media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 418/885] media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 419/885] media: uvcvideo: Refactor power_line_frequency_controls_limited Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 420/885] coresight: etm4x: Fix accesses to TRCSEQRSTEVR and TRCSEQSTR Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 421/885] coresight: cti: Prevent negative values of enable count Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 422/885] coresight: cti: Add PM runtime call in enable_store Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 423/885] usb: typec: intel_pmc_mux: Dont leak the ACPI device reference count Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 424/885] PCI/IOV: Enlarge virtfn sysfs name buffer Greg Kroah-Hartman
2023-03-07 16:55 ` [PATCH 6.1 425/885] PCI: switchtec: Return -EFAULT for copy_to_user() errors Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 426/885] PCI: endpoint: pci-epf-vntb: Clean up kernel_doc warning Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 427/885] PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 428/885] hwtracing: hisi_ptt: Only add the supported devices to the filters list Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 429/885] tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown() Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 430/885] tty: serial: fsl_lpuart: clear LPUART Status Register " Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 431/885] tty: serial: qcom-geni-serial: stop operations in progress at shutdown Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 432/885] serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init() Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 433/885] Revert "char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol" Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 434/885] eeprom: idt_89hpesx: Fix error handling in idt_init() Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 435/885] applicom: Fix PCI device refcount leak in applicom_init() Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 436/885] firmware: stratix10-svc: add missing gen_pool_destroy() in stratix10_svc_drv_probe() Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 437/885] firmware: stratix10-svc: fix error handle while alloc/add device failed Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 438/885] VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 439/885] mei: pxp: Use correct macros to initialize uuid_le Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 440/885] misc/mei/hdcp: " Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 441/885] misc: fastrpc: Fix an error handling path in fastrpc_rpmsg_probe() Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 442/885] driver core: fix resource leak in device_add() Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 443/885] driver core: location: Free struct acpi_pld_info *pld before return false Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 444/885] drivers: base: transport_class: fix possible memory leak Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 445/885] drivers: base: transport_class: fix resource leak when transport_add_device() fails Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 446/885] firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 447/885] fotg210-udc: Add missing completion handler Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 448/885] dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 449/885] fpga: microchip-spi: move SPI I/O buffers out of stack Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 450/885] fpga: microchip-spi: rewrite status polling in a time measurable way Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 451/885] usb: early: xhci-dbc: Fix a potential out-of-bound memory access Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 452/885] tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 453/885] RDMA/cxgb4: add null-ptr-check after ip_dev_find() Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 454/885] usb: musb: mediatek: dont unregister something that wasnt registered Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 455/885] usb: gadget: configfs: Restrict symlink creation is UDC already binded Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 456/885] phy: mediatek: remove temporary variable @mask_ Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 457/885] PCI: mt7621: Delay phy ports initialization Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 458/885] iommu: dart: Add suspend/resume support Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 459/885] iommu: dart: Support >64 stream IDs Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 460/885] iommu/dart: Fix apple_dart_device_group for PCI groups Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 461/885] iommu/vt-d: Set No Execute Enable bit in PASID table entry Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 462/885] power: supply: remove faulty cooling logic Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 463/885] RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish() Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 464/885] usb: max-3421: Fix setting of I/O pins Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 465/885] RDMA/irdma: Cap MSIX used to online CPUs + 1 Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 466/885] serial: fsl_lpuart: fix RS485 RTS polariy inverse issue Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 467/885] tty: serial: imx: Handle RS485 DE signal active high Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 468/885] tty: serial: imx: disable Ageing Timer interrupt request irq Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 469/885] driver core: fw_devlink: Add DL_FLAG_CYCLE support to device links Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 470/885] driver core: fw_devlink: Dont purge child fwnodes consumer links Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 471/885] driver core: fw_devlink: Allow marking a fwnode link as being part of a cycle Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 472/885] driver core: fw_devlink: Consolidate device link flag computation Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 473/885] driver core: fw_devlink: Improve check for fwnode with no device/driver Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 474/885] driver core: fw_devlink: Make cycle detection more robust Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 475/885] mtd: mtdpart: Dont create platform device thatll never probe Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 476/885] usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 477/885] dmaengine: dw-edma: Fix readq_ch() return value truncation Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 478/885] PCI: Fix dropping valid root bus resources with .end = zero Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 479/885] phy: rockchip-typec: fix tcphy_get_mode error case Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 480/885] PCI: qcom: Fix host-init error handling Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 481/885] iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry() Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 482/885] iommu: Fix error unwind in iommu_group_alloc() Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 483/885] iommu/amd: Do not identity map v2 capable device when snp is enabled Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 484/885] dmaengine: sf-pdma: pdma_desc memory leak fix Greg Kroah-Hartman
2023-03-07 16:56 ` [PATCH 6.1 485/885] dmaengine: dw-axi-dmac: Do not dereference NULL structure Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 486/885] dmaengine: ptdma: check for null desc before calling pt_cmd_callback Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 487/885] iommu/vt-d: Fix error handling in sva enable/disable paths Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 488/885] iommu/vt-d: Allow to use flush-queue when first level is default Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 489/885] RDMA/rxe: cleanup some error handling in rxe_verbs.c Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 490/885] RDMA/rxe: Fix missing memory barriers in rxe_queue.h Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 491/885] IB/hfi1: Fix math bugs in hfi1_can_pin_pages() Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 492/885] IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 493/885] Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use" Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 494/885] remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 495/885] media: ti: cal: fix possible memory leak in cal_ctx_create() Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 496/885] media: platform: ti: Add missing check for devm_regulator_get Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 497/885] media: imx: imx7-media-csi: fix missing clk_disable_unprepare() in imx7_csi_init() Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 498/885] powerpc: Remove linker flag from KBUILD_AFLAGS Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 499/885] s390/vdso: Drop -shared from KBUILD_CFLAGS_64 Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 500/885] builddeb: clean generated package content Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 501/885] media: max9286: Fix memleak in max9286_v4l2_register() Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 502/885] media: ov2740: Fix memleak in ov2740_init_controls() Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 503/885] media: ov5675: Fix memleak in ov5675_init_controls() Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 504/885] media: ov5640: Fix soft reset sequence and timings Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 505/885] media: ov5640: Handle delays when no reset_gpio set Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 506/885] media: mc: Get media_device directly from pad Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 507/885] media: i2c: ov772x: Fix memleak in ov772x_probe() Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 508/885] media: i2c: imx219: Split common registers from mode tables Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 509/885] media: i2c: imx219: Fix binning for RAW8 capture Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 510/885] media: platform: mtk-mdp3: Fix return value check in mdp_probe() Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 511/885] media: camss: csiphy-3ph: avoid undefined behavior Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 512/885] media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 513/885] media: platform: mtk-mdp3: fix Kconfig dependencies Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 514/885] media: v4l2-jpeg: correct the skip count in jpeg_parse_app14_data Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 515/885] media: v4l2-jpeg: ignore the unknown APP14 marker Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 516/885] media: hantro: Fix JPEG encoder ENUM_FRMSIZE on RK3399 Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 517/885] media: imx-jpeg: Apply clk_bulk api instead of operating specific clk Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 518/885] media: amphion: correct the unspecified color space Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 519/885] media: drivers/media/v4l2-core/v4l2-h264 : add detection of null pointers Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 520/885] media: rc: Fix use-after-free bugs caused by ene_tx_irqsim() Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 521/885] media: atomisp: Only set default_run_mode on first open of a stream/asd Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 522/885] media: i2c: ov7670: 0 instead of -EINVAL was returned Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 523/885] media: usb: siano: Fix use after free bugs caused by do_submit_urb Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 524/885] media: saa7134: Use video_unregister_device for radio_dev Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 525/885] rpmsg: glink: Avoid infinite loop on intent for missing channel Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 526/885] rpmsg: glink: Release driver_override Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 527/885] ARM: OMAP2+: omap4-common: Fix refcount leak bug Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 528/885] arm64: dts: qcom: msm8996: Add additional A2NoC clocks Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 529/885] udf: Define EFSCORRUPTED error code Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 530/885] context_tracking: Fix noinstr vs KASAN Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 531/885] exit: Detect and fix irq disabled state in oops Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 532/885] ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 533/885] fs: Use CHECK_DATA_CORRUPTION() when kernel bugs are detected Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 534/885] blk-iocost: fix divide by 0 error in calc_lcoefs() Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 535/885] blk-cgroup: dropping parent refcount after pd_free_fn() is done Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 536/885] blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy() Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 537/885] trace/blktrace: fix memory leak with using debugfs_lookup() Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 538/885] btrfs: scrub: improve tree block error reporting Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 539/885] arm64: zynqmp: Enable hs termination flag for USB dwc3 controller Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 540/885] cpuidle, intel_idle: Fix CPUIDLE_FLAG_INIT_XSTATE Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 541/885] x86/fpu: Dont set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 542/885] cpuidle: drivers: firmware: psci: Dont instrument suspend code Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 543/885] cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 544/885] perf/x86/intel/uncore: Add Meteor Lake support Greg Kroah-Hartman
2023-03-07 16:57 ` [PATCH 6.1 545/885] wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect() Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 546/885] wifi: ath11k: fix monitor mode bringup crash Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 547/885] wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds() Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 548/885] rcu: Make RCU_LOCKDEP_WARN() avoid early lockdep checks Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 549/885] rcu: Suppress smp_processor_id() complaint in synchronize_rcu_expedited_wait() Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 550/885] srcu: Delegate work to the boot cpu if using SRCU_SIZE_SMALL Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 551/885] rcu-tasks: Make rude RCU-Tasks work well with CPU hotplug Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 552/885] rcu-tasks: Handle queue-shrink/callback-enqueue race condition Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 553/885] wifi: ath11k: debugfs: fix to work with multiple PCI devices Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 554/885] thermal: intel: Fix unsigned comparison with less than zero Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 555/885] timers: Prevent union confusion from unexpected restart_syscall() Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 556/885] x86/bugs: Reset speculation control settings on init Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 557/885] bpftool: Always disable stack protection for BPF objects Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 558/885] wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 559/885] wifi: mt7601u: fix an integer underflow Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 560/885] inet: fix fast path in __inet_hash_connect() Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 561/885] ice: restrict PTP HW clock freq adjustments to 100, 000, 000 PPB Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 562/885] ice: add missing checks for PF vsi type Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 563/885] ACPI: Dont build ACPICA with -Os Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 564/885] bpf, docs: Fix modulo zero, division by zero, overflow, and underflow Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 565/885] thermal: intel: intel_pch: Add support for Wellsburg PCH Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 566/885] clocksource: Suspend the watchdog temporarily when high read latency detected Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 567/885] crypto: hisilicon: Wipe entire pool on error Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 568/885] net: bcmgenet: Add a check for oversized packets Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 569/885] m68k: Check syscall_trace_enter() return code Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 570/885] s390/mm,ptdump: avoid Kasan vs Memcpy Real markers swapping Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 571/885] netfilter: nf_tables: NULL pointer dereference in nf_tables_updobj() Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 572/885] can: isotp: check CAN address family in isotp_bind() Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 573/885] gcc-plugins: drop -std=gnu++11 to fix GCC 13 build Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 574/885] tools/power/x86/intel-speed-select: Add Emerald Rapid quirk Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 575/885] wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 576/885] ACPI: video: Fix Lenovo Ideapad Z570 DMI match Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 577/885] net/mlx5: fw_tracer: Fix debug print Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 578/885] coda: Avoid partial allocation of sig_inputArgs Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 579/885] uaccess: Add minimum bounds check on kernel buffer size Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 580/885] s390/idle: mark arch_cpu_idle() noinstr Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 581/885] time/debug: Fix memory leak with using debugfs_lookup() Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 582/885] PM: domains: fix " Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 583/885] PM: EM: " Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 584/885] Bluetooth: Fix issue with Actions Semi ATS2851 based devices Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 585/885] Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921 Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 586/885] Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 587/885] wifi: rtw89: debug: avoid invalid access on RTW89_DBG_SEL_MAC_30 Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 588/885] hv_netvsc: Check status in SEND_RNDIS_PKT completion message Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 589/885] s390/kfence: fix page fault reporting Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 590/885] devlink: Fix TP_STRUCT_entry in trace of devlink health report Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 591/885] scm: add user copy checks to put_cmsg() Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 592/885] drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Tab 3 X90F Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 593/885] drm: panel-orientation-quirks: Add quirk for DynaBook K50 Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 594/885] drm/amd/display: Reduce expected sdp bandwidth for dcn321 Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 595/885] drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 596/885] drm/amd/display: Fix potential null-deref in dm_resume Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 597/885] drm/omap: dsi: Fix excessive stack usage Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 598/885] HID: Add Mapping for System Microphone Mute Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 599/885] drm/tiny: ili9486: Do not assume 8-bit only SPI controllers Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 600/885] drm/amd/display: Defer DIG FIFO disable after VID stream enable Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 601/885] drm/radeon: free iio for atombios when driver shutdown Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 602/885] drm/amd: Avoid BUG() for case of SRIOV missing IP version Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 603/885] drm/amdkfd: Page aligned memory reserve size Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 604/885] scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write Greg Kroah-Hartman
2023-03-07 16:58 ` [PATCH 6.1 605/885] Revert "fbcon: dont lose the console font across generic->chip driver switch" Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 606/885] drm/amd: Avoid ASSERT for some message failures Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 607/885] drm: amd: display: Fix memory leakage Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 608/885] drm/amd/display: fix mapping to non-allocated address Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 609/885] HID: uclogic: Add frame type quirk Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 610/885] HID: uclogic: Add battery quirk Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 611/885] HID: uclogic: Add support for XP-PEN Deco Pro SW Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 612/885] HID: uclogic: Add support for XP-PEN Deco Pro MW Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 613/885] drm/msm/dsi: Add missing check for alloc_ordered_workqueue Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 614/885] drm: rcar-du: Add quirk for H3 ES1.x pclk workaround Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 615/885] drm: rcar-du: Fix setting a reserved bit in DPLLCR Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 616/885] drm/drm_print: correct format problem Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 617/885] drm/amd/display: Set hvm_enabled flag for S/G mode Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 618/885] habanalabs: extend fatal messages to contain PCI info Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 619/885] habanalabs: fix bug in timestamps registration code Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 620/885] docs/scripts/gdb: add necessary make scripts_gdb step Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 621/885] drm/msm/dpu: Add DSC hardware blocks to register snapshot Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 622/885] ASoC: soc-compress: Reposition and add pcm_mutex Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 623/885] ASoC: kirkwood: Iterate over array indexes instead of using pointer math Greg Kroah-Hartman
2023-03-07 16:59 ` Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 624/885] regulator: max77802: Bounds check regulator id against opmode Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 625/885] regulator: s5m8767: Bounds check id indexing into arrays Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 626/885] Revert "drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is uninstalled" Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 627/885] drm/amd/display: fix FCLK pstate change underflow Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 628/885] gfs2: Improve gfs2_make_fs_rw error handling Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 629/885] hwmon: (coretemp) Simplify platform device handling Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 630/885] hwmon: (nct6775) Directly call ASUS ACPI WMI method Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 631/885] hwmon: (nct6775) B650/B660/X670 ASUS boards support Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 632/885] pinctrl: at91: use devm_kasprintf() to avoid potential leaks Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 633/885] drm/amd/display: Do not commit pipe when updating DRR Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 634/885] scsi: snic: Fix memory leak with using debugfs_lookup() Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 635/885] scsi: ufs: core: Fix device management cmd timeout flow Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 636/885] HID: logitech-hidpp: Dont restart communication if not necessary Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 637/885] drm/amd/display: Enable P-state validation checks for DCN314 Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 638/885] drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5 Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 639/885] drm/amd/display: Disable HUBP/DPP PG on DCN314 for now Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 640/885] dm thin: add cond_resched() to various workqueue loops Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 641/885] dm cache: " Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 642/885] nfsd: zero out pointers after putting nfsd_files on COPY setup error Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 643/885] nfsd: dont hand out delegation on setuid files being opened for write Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 644/885] cifs: prevent data race in smb2_reconnect() Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 645/885] drm/shmem-helper: Revert accidental non-GPL export Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 646/885] driver core: fw_devlink: Avoid spurious error message Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 647/885] wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 648/885] scsi: mpt3sas: Remove usage of dma_get_required_mask() API Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 649/885] firmware: coreboot: framebuffer: Ignore reserved pixel color bits Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 650/885] block: dont allow multiple bios for IOCB_NOWAIT issue Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 651/885] block: clear bio->bi_bdev when putting a bio back in the cache Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 652/885] block: be a bit more careful in checking for NULL bdev while polling Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 653/885] rtc: pm8xxx: fix set-alarm race Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 654/885] ipmi: ipmb: Fix the MODULE_PARM_DESC associated to retry_time_ms Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 655/885] ipmi:ssif: resend_msg() cannot fail Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 656/885] ipmi_ssif: Rename idle state and check Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 657/885] io_uring: Replace 0-length array with flexible array Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 658/885] io_uring: use user visible tail in io_uring_poll() Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 659/885] io_uring: handle TIF_NOTIFY_RESUME when checking for task_work Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 660/885] io_uring: add a conditional reschedule to the IOPOLL cancelation loop Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 661/885] io_uring: add reschedule point to handle_tw_list() Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 662/885] io_uring/rsrc: disallow multi-source reg buffers Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 663/885] io_uring: remove MSG_NOSIGNAL from recvmsg Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 664/885] io_uring: fix fget leak when fs dont support nowait buffered read Greg Kroah-Hartman
2023-03-07 16:59 ` [PATCH 6.1 665/885] s390/extmem: return correct segment type in __segment_load() Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 666/885] s390: discard .interp section Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 667/885] s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 668/885] s390/kprobes: fix current_kprobe never cleared after kprobes reenter Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 669/885] KVM: s390: disable migration mode when dirty tracking is disabled Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 670/885] cifs: Fix uninitialized memory read in smb3_qfs_tcon() Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 671/885] cifs: Fix uninitialized memory reads for oparms.mode Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 672/885] cifs: fix mount on old smb servers Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 673/885] cifs: introduce cifs_io_parms in smb2_async_writev() Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 674/885] cifs: split out smb3_use_rdma_offload() helper Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 675/885] cifs: dont try to use rdma offload on encrypted connections Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 676/885] cifs: Check the lease context if we actually got a lease Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 677/885] cifs: return a single-use cfid if we did not get " Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 678/885] scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 679/885] scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 680/885] scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 681/885] btrfs: hold block group refcount during async discard Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 682/885] locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 683/885] ksmbd: fix wrong data area length for smb2 lock request Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 684/885] ksmbd: do not allow the actual frame length to be smaller than the rfc1002 length Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 685/885] ksmbd: fix possible memory leak in smb2_lock() Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 686/885] torture: Fix hang during kthread shutdown phase Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 687/885] ARM: dts: exynos: correct HDMI phy compatible in Exynos4 Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 688/885] io_uring: mark task TASK_RUNNING before handling resume/task work Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 689/885] hfs: fix missing hfs_bnode_get() in __hfs_bnode_create Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 690/885] fs: hfsplus: fix UAF issue in hfsplus_put_super Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 691/885] exfat: fix reporting fs error when reading dir beyond EOF Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 692/885] exfat: fix unexpected EOF while reading dir Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 693/885] exfat: redefine DIR_DELETED as the bad cluster number Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 694/885] exfat: fix inode->i_blocks for non-512 byte sector size device Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 695/885] fs: dlm: dont set stop rx flag after node reset Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 696/885] fs: dlm: move sending fin message into state change handling Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 697/885] fs: dlm: send FIN ack back in right cases Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 698/885] f2fs: fix information leak in f2fs_move_inline_dirents() Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 699/885] f2fs: retry to update the inode page given data corruption Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 700/885] f2fs: fix cgroup writeback accounting with fs-layer encryption Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 701/885] f2fs: fix kernel crash due to null io->bio Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 702/885] ocfs2: fix defrag path triggering jbd2 ASSERT Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 703/885] ocfs2: fix non-auto defrag path not working issue Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 704/885] fs/cramfs/inode.c: initialize file_ra_state Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 705/885] selftests/landlock: Skip overlayfs tests when not supported Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 706/885] selftests/landlock: Test ptrace as much as possible with Yama Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 707/885] udf: Truncate added extents on failed expansion Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 708/885] udf: Do not bother merging very long extents Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 709/885] udf: Do not update file length for failed writes to inline files Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 710/885] udf: Preserve link count of system files Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 711/885] udf: Detect system inodes linked into directory hierarchy Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 712/885] udf: Fix file corruption when appending just after end of preallocated extent Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 713/885] md: dont update recovery_cp when curr_resync is ACTIVE Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 714/885] RDMA/siw: Fix user page pinning accounting Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 715/885] KVM: Destroy target device if coalesced MMIO unregistration fails Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 716/885] KVM: VMX: Fix crash due to uninitialized current_vmcs Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 717/885] KVM: Register /dev/kvm as the _very_ last thing during initialization Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 718/885] KVM: x86: Purge "highest ISR" cache when updating APICv state Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 719/885] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 720/885] KVM: x86: Dont inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 721/885] KVM: x86: Dont inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 722/885] KVM: SVM: Flush the "current" TLB when activating AVIC Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 723/885] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 724/885] KVM: SVM: Dont put/load AVIC when setting virtual APIC mode Greg Kroah-Hartman
2023-03-07 17:00 ` [PATCH 6.1 725/885] KVM: x86: Inject #GP if WRMSR sets reserved bits in APIC Self-IPI Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 726/885] KVM: x86: Inject #GP on x2APIC WRMSR that sets reserved bits 63:32 Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 727/885] KVM: SVM: Fix potential overflow in SEVs send|receive_update_data() Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 728/885] KVM: SVM: hyper-v: placate modpost section mismatch error Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 729/885] selftests: x86: Fix incorrect kernel headers search path Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 730/885] x86/virt: Force GIF=1 prior to disabling SVM (for reboot flows) Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 731/885] x86/crash: Disable virt in core NMI crash handler to avoid double shootdown Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 732/885] x86/reboot: Disable virtualization in an emergency if SVM is supported Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 733/885] x86/reboot: Disable SVM, not just VMX, when stopping CPUs Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 734/885] x86/kprobes: Fix __recover_optprobed_insn check optimizing logic Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 735/885] x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 736/885] x86/microcode/amd: Remove load_microcode_amd()s bsp parameter Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 737/885] x86/microcode/AMD: Add a @cpu parameter to the reloading functions Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 738/885] x86/microcode/AMD: Fix mixed steppings support Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 739/885] x86/speculation: Allow enabling STIBP with legacy IBRS Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 740/885] Documentation/hw-vuln: Document the interaction between IBRS and STIBP Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 741/885] virt/sev-guest: Return -EIO if certificate buffer is not large enough Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 742/885] brd: mark as nowait compatible Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 743/885] brd: return 0/-error from brd_insert_page() Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 744/885] brd: check for REQ_NOWAIT and set correct page allocation mask Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 745/885] ima: fix error handling logic when file measurement failed Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 746/885] ima: Align ima_file_mmap() parameters with mmap_file LSM hook Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 747/885] powerpc/boot: Dont always pass -mcpu=powerpc when building 32-bit uImage Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 748/885] selftests/powerpc: Fix incorrect kernel headers search path Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 749/885] selftests/ftrace: Fix eprobe syntax test case to check filter support Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 750/885] selftests: sched: Fix incorrect kernel headers search path Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 751/885] selftests: core: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 752/885] selftests: pid_namespace: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 753/885] selftests: arm64: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 754/885] selftests: clone3: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 755/885] selftests: pidfd: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 756/885] selftests: membarrier: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 757/885] selftests: kcmp: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 758/885] selftests: media_tests: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 759/885] selftests: gpio: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 760/885] selftests: filesystems: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 761/885] selftests: user_events: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 762/885] selftests: ptp: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 763/885] selftests: sync: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 764/885] selftests: rseq: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 765/885] selftests: move_mount_set_group: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 766/885] selftests: mount_setattr: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 767/885] selftests: perf_events: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 768/885] selftests: ipc: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 769/885] selftests: futex: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 770/885] selftests: drivers: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 771/885] selftests: dmabuf-heaps: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 772/885] selftests: vm: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 773/885] selftests: seccomp: " Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 774/885] irqdomain: Fix association race Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 775/885] irqdomain: Fix disassociation race Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 776/885] irqdomain: Look for existing mapping only once Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 777/885] irqdomain: Drop bogus fwspec-mapping error handling Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 778/885] irqdomain: Refactor __irq_domain_alloc_irqs() Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 779/885] irqdomain: Fix mapping-creation race Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 780/885] irqdomain: Fix domain registration race Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 781/885] crypto: qat - fix out-of-bounds read Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 782/885] mm/damon/paddr: fix missing folio_put() Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 783/885] ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls() Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 784/885] ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC Greg Kroah-Hartman
2023-03-07 17:01 ` [PATCH 6.1 785/885] jbd2: fix data missing when reusing bh which is ready to be checkpointed Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 786/885] ext4: optimize ea_inode block expansion Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 787/885] ext4: refuse to create ea block when umounted Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 788/885] ext4: Fix possible corruption when moving a directory Greg Kroah-Hartman
2023-03-07 19:23 ` Eric Biggers
2023-03-08 7:17 ` Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 789/885] cxl/pmem: Fix nvdimm registration races Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 790/885] mtd: spi-nor: sfdp: Fix index value for SCCR dwords Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 791/885] mtd: spi-nor: spansion: Consider reserved bits in CFR5 register Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 792/885] mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 793/885] dm: send just one event on resize, not two Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 794/885] dm: add cond_resched() to dm_wq_work() Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 795/885] dm: add cond_resched() to dm_wq_requeue_work() Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 796/885] wifi: rtw88: use RTW_FLAG_POWERON flag to prevent to power on/off twice Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 797/885] wifi: rtl8xxxu: Use a longer retry limit of 48 Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 798/885] wifi: ath11k: allow system suspend to survive ath11k Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 799/885] wifi: cfg80211: Fix use after free for wext Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 800/885] wifi: cfg80211: Set SSID if it is not already set Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 801/885] cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 802/885] qede: fix interrupt coalescing configuration Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 803/885] thermal: intel: powerclamp: Fix cur_state for multi package system Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 804/885] dm flakey: fix logic when corrupting a bio Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 805/885] dm cache: free background trackers queued work in btracker_destroy Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 806/885] dm flakey: dont corrupt the zero page Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 807/885] dm flakey: fix a bug with 32-bit highmem systems Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 808/885] hwmon: (peci/cputemp) Fix off-by-one in coretemp_label allocation Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 809/885] hwmon: (nct6775) Fix incorrect parenthesization in nct6775_write_fan_div() Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 810/885] ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 811/885] ARM: dts: qcom: sdx55: " Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 812/885] ARM: dts: exynos: correct TMU phandle in Exynos4210 Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 813/885] ARM: dts: exynos: correct TMU phandle in Exynos4 Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 814/885] ARM: dts: exynos: correct TMU phandle in Odroid XU3 family Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 815/885] ARM: dts: exynos: correct TMU phandle in Exynos5250 Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 816/885] ARM: dts: exynos: correct TMU phandle in Odroid XU Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 817/885] ARM: dts: exynos: correct TMU phandle in Odroid HC1 Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 818/885] arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 819/885] fuse: add inode/permission checks to fileattr_get/fileattr_set Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 820/885] rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 821/885] ceph: update the time stamps and try to drop the suid/sgid Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 822/885] regulator: core: Use ktime_get_boottime() to determine how long a regulator was off Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 823/885] panic: fix the panic_print NMI backtrace setting Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 824/885] mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 825/885] alpha: fix FEN fault handling Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 826/885] dax/kmem: Fix leak of memory-hotplug resources Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 827/885] mips: fix syscall_get_nr Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 828/885] media: ipu3-cio2: Fix PM runtime usage_count in driver unbind Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 829/885] remoteproc/mtk_scp: Move clk ops outside send_lock Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 830/885] docs: gdbmacros: print newest record Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 831/885] mm: memcontrol: deprecate charge moving Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 832/885] mm/thp: check and bail out if page in deferred queue already Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 833/885] ktest.pl: Give back console on Ctrt^C on monitor Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 834/885] kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 835/885] ktest.pl: Fix missing "end_monitor" when machine check fails Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 836/885] ktest.pl: Add RUN_TIMEOUT option with default unlimited Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 837/885] memory tier: release the new_memtier in find_create_memory_tier() Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 838/885] ring-buffer: Handle race between rb_move_tail and rb_check_pages Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 839/885] tools/bootconfig: fix single & used for logical condition Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 840/885] tracing/eprobe: Fix to add filter on eprobe description in README file Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 841/885] iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 842/885] iommu/amd: Improve page fault error reporting Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 843/885] scsi: aacraid: Allocate cmd_priv with scsicmd Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 844/885] scsi: core: Remove the /proc/scsi/${proc_name} directory earlier Greg Kroah-Hartman
2023-03-07 17:02 ` [PATCH 6.1 845/885] scsi: qla2xxx: Fix link failure in NPIV environment Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 846/885] scsi: qla2xxx: Check if port is online before sending ELS Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 847/885] scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 848/885] scsi: qla2xxx: Remove unintended flag clearing Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 849/885] scsi: qla2xxx: Fix erroneous link down Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 850/885] scsi: qla2xxx: Remove increment of interface err cnt Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 851/885] scsi: ses: Dont attach if enclosure has no components Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 852/885] scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process() Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 853/885] scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 854/885] scsi: ses: Fix possible desc_ptr " Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 855/885] scsi: ses: Fix slab-out-of-bounds in ses_intf_remove() Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 856/885] RISC-V: add a spin_shadow_stack declaration Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 857/885] riscv: Avoid enabling interrupts in die() Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 858/885] riscv: mm: fix regression due to update_mmu_cache change Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 859/885] riscv: jump_label: Fixup unaligned arch_static_branch function Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 860/885] riscv, mm: Perform BPF exhandler fixup on page fault Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 861/885] riscv: ftrace: Remove wasted nops for !RISCV_ISA_C Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 862/885] riscv: ftrace: Reduce the detour code size to half Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 863/885] MIPS: DTS: CI20: fix otg power gpio Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 864/885] PCI/PM: Observe reset delay irrespective of bridge_d3 Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 865/885] PCI: Unify delay handling for reset and resume Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 866/885] PCI: hotplug: Allow marking devices as disconnected during bind/unbind Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 867/885] PCI: Avoid FLR for AMD FCH AHCI adapters Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 868/885] PCI/DPC: Await readiness of secondary bus after reset Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 869/885] bus: mhi: ep: Only send -ENOTCONN status if client driver is available Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 870/885] bus: mhi: ep: Move chan->lock to the start of processing queued ch ring Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 871/885] bus: mhi: ep: Save channel state locally during suspend and resume Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 872/885] iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 873/885] iommu/vt-d: Fix PASID directory pointer coherency Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 874/885] vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 875/885] vfio/type1: prevent underflow of locked_vm via exec() Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 876/885] vfio/type1: track locked_vm per dma Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 877/885] vfio/type1: restore locked_vm Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 878/885] drm/amd: Fix initialization for nbio 7.5.1 Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 879/885] drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nv Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 880/885] drm/radeon: Fix eDP for single-display iMac11,2 Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 881/885] drm/i915: Dont use stolen memory for ring buffers with LLC Greg Kroah-Hartman
2023-03-07 17:03 ` [Intel-gfx] " Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 882/885] drm/i915: Dont use BAR mappings " Greg Kroah-Hartman
2023-03-07 17:03 ` [Intel-gfx] " Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 883/885] drm/gud: Fix UBSAN warning Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 884/885] drm/edid: fix AVI infoframe aspect ratio handling Greg Kroah-Hartman
2023-03-07 17:03 ` [PATCH 6.1 885/885] drm/edid: fix parsing of 3D modes from HDMI VSDB Greg Kroah-Hartman
2023-03-07 20:54 ` [PATCH 6.1 000/885] 6.1.16-rc1 review Conor Dooley
2023-03-08 4:20 ` Bagas Sanjaya
2023-03-08 4:29 ` Daniel Díaz
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.