All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Stephen Boyd <swboyd@chromium.org>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Bjorn Andersson <andersson@kernel.org>,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org
Subject: [PATCH v5 27/32] drm/msm/dpu: add support for wide planes
Date: Fri, 10 Mar 2023 02:56:59 +0200	[thread overview]
Message-ID: <20230310005704.1332368-28-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230310005704.1332368-1-dmitry.baryshkov@linaro.org>

Typically SSPP can support rectangle with width up to 2560. However it's
possible to use multirect feature and split source to use the SSPP to
output two consecutive rectangles. This commit brings in this capability
to support wider screen resolutions.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c  |  19 +++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 129 +++++++++++++++++++---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h |   4 +
 3 files changed, 135 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index e651e4593280..b748c4f17c90 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -480,6 +480,15 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
 					   format, fb ? fb->modifier : 0,
 					   &pstate->pipe, 0, stage_cfg);
 
+		if (pstate->r_pipe.sspp) {
+			set_bit(pstate->r_pipe.sspp->idx, fetch_active);
+			_dpu_crtc_blend_setup_pipe(crtc, plane,
+						   mixer, cstate->num_mixers,
+						   pstate->stage,
+						   format, fb ? fb->modifier : 0,
+						   &pstate->r_pipe, 1, stage_cfg);
+		}
+
 		/* blend config update */
 		for (lm_idx = 0; lm_idx < cstate->num_mixers; lm_idx++) {
 			_dpu_crtc_setup_blend_cfg(mixer + lm_idx, pstate, format);
@@ -1316,10 +1325,16 @@ static int _dpu_debugfs_status_show(struct seq_file *s, void *data)
 		seq_printf(s, "\tdst x:%4d dst_y:%4d dst_w:%4d dst_h:%4d\n",
 			state->crtc_x, state->crtc_y, state->crtc_w,
 			state->crtc_h);
-		seq_printf(s, "\tsspp:%s\n",
+		seq_printf(s, "\tsspp[0]:%s\n",
 			   pstate->pipe.sspp->cap->name);
-		seq_printf(s, "\tmultirect: mode: %d index: %d\n",
+		seq_printf(s, "\tmultirect[0]: mode: %d index: %d\n",
 			pstate->pipe.multirect_mode, pstate->pipe.multirect_index);
+		if (pstate->r_pipe.sspp) {
+			seq_printf(s, "\tsspp[1]:%s\n",
+				   pstate->r_pipe.sspp->cap->name);
+			seq_printf(s, "\tmultirect[1]: mode: %d index: %d\n",
+				   pstate->r_pipe.multirect_mode, pstate->r_pipe.multirect_index);
+		}
 
 		seq_puts(s, "\n");
 	}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 3d798b939faa..9a03d1cad0ee 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -701,6 +701,10 @@ static void _dpu_plane_color_fill(struct dpu_plane *pdpu,
 	/* update sspp */
 	_dpu_plane_color_fill_pipe(pstate, &pstate->pipe, &pstate->pipe_cfg.dst_rect,
 				   fill_color, fmt);
+
+	if (pstate->r_pipe.sspp)
+		_dpu_plane_color_fill_pipe(pstate, &pstate->r_pipe, &pstate->r_pipe_cfg.dst_rect,
+					   fill_color, fmt);
 }
 
 int dpu_plane_validate_multirect_v2(struct dpu_multirect_plane_states *plane)
@@ -958,9 +962,12 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
 	int ret = 0, min_scale;
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
 	struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
+	struct dpu_sw_pipe *pipe = &pstate->pipe;
+	struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
 	const struct drm_crtc_state *crtc_state = NULL;
 	const struct dpu_format *fmt;
 	struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
+	struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
 	struct drm_rect fb_rect = { 0 };
 	uint32_t max_linewidth;
 	unsigned int rotation;
@@ -984,8 +991,11 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
 	if (!new_plane_state->visible)
 		return 0;
 
-	pstate->pipe.multirect_index = DPU_SSPP_RECT_SOLO;
-	pstate->pipe.multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+	pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+	pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+	r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+	r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+	r_pipe->sspp = NULL;
 
 	pstate->stage = DPU_STAGE_0 + pstate->base.normalized_zpos;
 	if (pstate->stage >= pdpu->catalog->caps->max_mixer_blendstages) {
@@ -1017,19 +1027,58 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
 
 	max_linewidth = pdpu->catalog->caps->max_linewidth;
 
-	/* check decimated source width */
+	fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
+
 	if (drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) {
-		DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
-				DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
-		return -E2BIG;
-	}
+		/* struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc_state); */
 
-	fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
+		if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
+			DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
+					DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
+			return -E2BIG;
+		}
 
-	ret = dpu_plane_atomic_check_pipe(pdpu, &pstate->pipe, pipe_cfg, fmt);
+		/*
+		 * FIXME: it's not possible to check if sourcesplit is supported,
+		 * LMs is not assigned yet. It happens in dpu_encoder_virt_mode_set
+		 */
+		if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) ||
+			   drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) ||
+			   (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) &&
+			    !test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features)) ||
+			   /* cstate->num_mixers < 2 ||
+			   !test_bit(DPU_MIXER_SOURCESPLIT, &cstate->mixers[0].hw_lm->cap->features) || */
+			   DPU_FORMAT_IS_YUV(fmt)) {
+			DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, can't use split source\n",
+					DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
+			return -E2BIG;
+		}
+
+		/* Use multirect for wide plane. We do not support dynamic assignment of SSPPs, so we know the configuration. */
+		pipe->multirect_index = DPU_SSPP_RECT_0;
+		pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
+
+		r_pipe->sspp = pipe->sspp;
+		r_pipe->multirect_index = DPU_SSPP_RECT_1;
+		r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
+
+		*r_pipe_cfg = *pipe_cfg;
+		pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
+		pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
+		r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
+		r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
+	}
+
+	ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt);
 	if (ret)
 		return ret;
 
+	if (r_pipe->sspp) {
+		ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt);
+		if (ret)
+			return ret;
+	}
+
 	supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0;
 
 	if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION))
@@ -1096,8 +1145,10 @@ void dpu_plane_flush(struct drm_plane *plane)
 	else if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG)
 		/* force 100% alpha */
 		_dpu_plane_color_fill(pdpu, pdpu->color_fill, 0xFF);
-	else
+	else {
 		dpu_plane_flush_csc(pdpu, &pstate->pipe);
+		dpu_plane_flush_csc(pdpu, &pstate->r_pipe);
+	}
 
 	/* flag h/w flush complete */
 	if (plane->state)
@@ -1209,13 +1260,14 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 	struct drm_plane_state *state = plane->state;
 	struct dpu_plane_state *pstate = to_dpu_plane_state(state);
 	struct dpu_sw_pipe *pipe = &pstate->pipe;
+	struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
 	struct drm_crtc *crtc = state->crtc;
 	struct drm_framebuffer *fb = state->fb;
 	bool is_rt_pipe;
 	const struct dpu_format *fmt =
 		to_dpu_format(msm_framebuffer_format(fb));
 	struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
-
+	struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
 	struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
 	struct msm_gem_address_space *aspace = kms->base.aspace;
 	struct dpu_hw_fmt_layout layout;
@@ -1243,6 +1295,12 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 				   drm_mode_vrefresh(&crtc->mode),
 				   layout_valid ? &layout : NULL);
 
+	if (r_pipe->sspp) {
+		dpu_plane_sspp_update_pipe(plane, r_pipe, r_pipe_cfg, fmt,
+					   drm_mode_vrefresh(&crtc->mode),
+					   layout_valid ? &layout : NULL);
+	}
+
 	if (pstate->needs_qos_remap)
 		pstate->needs_qos_remap = false;
 
@@ -1250,16 +1308,31 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 						    &crtc->mode, pipe_cfg);
 
 	pstate->plane_clk = _dpu_plane_calc_clk(&crtc->mode, pipe_cfg);
+
+	if (r_pipe->sspp) {
+		pstate->plane_fetch_bw += _dpu_plane_calc_bw(pdpu->catalog, fmt, &crtc->mode, r_pipe_cfg);
+
+		pstate->plane_clk = max(pstate->plane_clk, _dpu_plane_calc_clk(&crtc->mode, r_pipe_cfg));
+	}
 }
 
 static void _dpu_plane_atomic_disable(struct drm_plane *plane)
 {
 	struct drm_plane_state *state = plane->state;
 	struct dpu_plane_state *pstate = to_dpu_plane_state(state);
+	struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
 
 	trace_dpu_plane_disable(DRMID(plane), false,
 				pstate->pipe.multirect_mode);
 
+	if (r_pipe->sspp) {
+		r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+		r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+
+		if (r_pipe->sspp->ops.setup_multirect)
+			r_pipe->sspp->ops.setup_multirect(r_pipe);
+	}
+
 	pstate->pending = true;
 }
 
@@ -1292,6 +1365,9 @@ static void dpu_plane_destroy(struct drm_plane *plane)
 		pstate = to_dpu_plane_state(plane->state);
 		_dpu_plane_set_qos_ctrl(plane, &pstate->pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
 
+		if (pstate->r_pipe.sspp)
+			_dpu_plane_set_qos_ctrl(plane, &pstate->r_pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
+
 		mutex_destroy(&pdpu->lock);
 
 		/* this will destroy the states as well */
@@ -1372,12 +1448,29 @@ static void dpu_plane_atomic_print_state(struct drm_printer *p,
 		const struct drm_plane_state *state)
 {
 	const struct dpu_plane_state *pstate = to_dpu_plane_state(state);
+	const struct dpu_sw_pipe *pipe = &pstate->pipe;
+	const struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
+	const struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
+	const struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
 
 	drm_printf(p, "\tstage=%d\n", pstate->stage);
-	drm_printf(p, "\tsspp=%s\n", pstate->pipe.sspp->cap->name);
-	drm_printf(p, "\tmultirect_mode=%s\n", dpu_get_multirect_mode(pstate->pipe.multirect_mode));
-	drm_printf(p, "\tmultirect_index=%s\n",
-		   dpu_get_multirect_index(pstate->pipe.multirect_index));
+
+	drm_printf(p, "\tsspp[0]=%s\n", pipe->sspp->cap->name);
+	drm_printf(p, "\tmultirect_mode[0]=%s\n", dpu_get_multirect_mode(pipe->multirect_mode));
+	drm_printf(p, "\tmultirect_index[0]=%s\n",
+		   dpu_get_multirect_index(pipe->multirect_index));
+	drm_printf(p, "\tsrc[0]=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&pipe_cfg->src_rect));
+	drm_printf(p, "\tdst[0]=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&pipe_cfg->dst_rect));
+
+	if (r_pipe->sspp) {
+		drm_printf(p, "\tsspp[1]=%s\n", r_pipe->sspp->cap->name);
+		drm_printf(p, "\tmultirect_mode[1]=%s\n",
+			   dpu_get_multirect_mode(r_pipe->multirect_mode));
+		drm_printf(p, "\tmultirect_index[1]=%s\n",
+			   dpu_get_multirect_index(r_pipe->multirect_index));
+		drm_printf(p, "\tsrc[1]=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&r_pipe_cfg->src_rect));
+		drm_printf(p, "\tdst[1]=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&r_pipe_cfg->dst_rect));
+	}
 }
 
 static void dpu_plane_reset(struct drm_plane *plane)
@@ -1411,6 +1504,10 @@ static void dpu_plane_reset(struct drm_plane *plane)
 	 * This is the place where the state is allocated, so fill it fully.
 	 */
 	pstate->pipe.sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe);
+	pstate->pipe.multirect_index = DPU_SSPP_RECT_SOLO;
+	pstate->pipe.multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+
+	pstate->r_pipe.sspp = NULL;
 
 	__drm_atomic_helper_plane_reset(plane, &pstate->base);
 }
@@ -1427,6 +1524,8 @@ void dpu_plane_danger_signal_ctrl(struct drm_plane *plane, bool enable)
 
 	pm_runtime_get_sync(&dpu_kms->pdev->dev);
 	_dpu_plane_set_qos_ctrl(plane, &pstate->pipe, enable, DPU_PLANE_QOS_PANIC_CTRL);
+	if (pstate->r_pipe.sspp)
+		_dpu_plane_set_qos_ctrl(plane, &pstate->r_pipe, enable, DPU_PLANE_QOS_PANIC_CTRL);
 	pm_runtime_put_sync(&dpu_kms->pdev->dev);
 }
 #endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
index 0ca9002015ff..7490ffd94d03 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
@@ -19,7 +19,9 @@
  * @base:	base drm plane state object
  * @aspace:	pointer to address space for input/output buffers
  * @pipe:	software pipe description
+ * @r_pipe:	software pipe description of the second pipe
  * @pipe_cfg:	software pipe configuration
+ * @r_pipe_cfg:	software pipe configuration for the second pipe
  * @stage:	assigned by crtc blender
  * @needs_qos_remap: qos remap settings need to be updated
  * @multirect_index: index of the rectangle of SSPP
@@ -34,7 +36,9 @@ struct dpu_plane_state {
 	struct drm_plane_state base;
 	struct msm_gem_address_space *aspace;
 	struct dpu_sw_pipe pipe;
+	struct dpu_sw_pipe r_pipe;
 	struct dpu_sw_pipe_cfg pipe_cfg;
+	struct dpu_sw_pipe_cfg r_pipe_cfg;
 	enum dpu_stage stage;
 	bool needs_qos_remap;
 	bool pending;
-- 
2.39.2


WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: freedreno@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <andersson@kernel.org>,
	dri-devel@lists.freedesktop.org,
	Stephen Boyd <swboyd@chromium.org>
Subject: [PATCH v5 27/32] drm/msm/dpu: add support for wide planes
Date: Fri, 10 Mar 2023 02:56:59 +0200	[thread overview]
Message-ID: <20230310005704.1332368-28-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230310005704.1332368-1-dmitry.baryshkov@linaro.org>

Typically SSPP can support rectangle with width up to 2560. However it's
possible to use multirect feature and split source to use the SSPP to
output two consecutive rectangles. This commit brings in this capability
to support wider screen resolutions.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c  |  19 +++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 129 +++++++++++++++++++---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h |   4 +
 3 files changed, 135 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index e651e4593280..b748c4f17c90 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -480,6 +480,15 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
 					   format, fb ? fb->modifier : 0,
 					   &pstate->pipe, 0, stage_cfg);
 
+		if (pstate->r_pipe.sspp) {
+			set_bit(pstate->r_pipe.sspp->idx, fetch_active);
+			_dpu_crtc_blend_setup_pipe(crtc, plane,
+						   mixer, cstate->num_mixers,
+						   pstate->stage,
+						   format, fb ? fb->modifier : 0,
+						   &pstate->r_pipe, 1, stage_cfg);
+		}
+
 		/* blend config update */
 		for (lm_idx = 0; lm_idx < cstate->num_mixers; lm_idx++) {
 			_dpu_crtc_setup_blend_cfg(mixer + lm_idx, pstate, format);
@@ -1316,10 +1325,16 @@ static int _dpu_debugfs_status_show(struct seq_file *s, void *data)
 		seq_printf(s, "\tdst x:%4d dst_y:%4d dst_w:%4d dst_h:%4d\n",
 			state->crtc_x, state->crtc_y, state->crtc_w,
 			state->crtc_h);
-		seq_printf(s, "\tsspp:%s\n",
+		seq_printf(s, "\tsspp[0]:%s\n",
 			   pstate->pipe.sspp->cap->name);
-		seq_printf(s, "\tmultirect: mode: %d index: %d\n",
+		seq_printf(s, "\tmultirect[0]: mode: %d index: %d\n",
 			pstate->pipe.multirect_mode, pstate->pipe.multirect_index);
+		if (pstate->r_pipe.sspp) {
+			seq_printf(s, "\tsspp[1]:%s\n",
+				   pstate->r_pipe.sspp->cap->name);
+			seq_printf(s, "\tmultirect[1]: mode: %d index: %d\n",
+				   pstate->r_pipe.multirect_mode, pstate->r_pipe.multirect_index);
+		}
 
 		seq_puts(s, "\n");
 	}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 3d798b939faa..9a03d1cad0ee 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -701,6 +701,10 @@ static void _dpu_plane_color_fill(struct dpu_plane *pdpu,
 	/* update sspp */
 	_dpu_plane_color_fill_pipe(pstate, &pstate->pipe, &pstate->pipe_cfg.dst_rect,
 				   fill_color, fmt);
+
+	if (pstate->r_pipe.sspp)
+		_dpu_plane_color_fill_pipe(pstate, &pstate->r_pipe, &pstate->r_pipe_cfg.dst_rect,
+					   fill_color, fmt);
 }
 
 int dpu_plane_validate_multirect_v2(struct dpu_multirect_plane_states *plane)
@@ -958,9 +962,12 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
 	int ret = 0, min_scale;
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
 	struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
+	struct dpu_sw_pipe *pipe = &pstate->pipe;
+	struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
 	const struct drm_crtc_state *crtc_state = NULL;
 	const struct dpu_format *fmt;
 	struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
+	struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
 	struct drm_rect fb_rect = { 0 };
 	uint32_t max_linewidth;
 	unsigned int rotation;
@@ -984,8 +991,11 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
 	if (!new_plane_state->visible)
 		return 0;
 
-	pstate->pipe.multirect_index = DPU_SSPP_RECT_SOLO;
-	pstate->pipe.multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+	pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+	pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+	r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+	r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+	r_pipe->sspp = NULL;
 
 	pstate->stage = DPU_STAGE_0 + pstate->base.normalized_zpos;
 	if (pstate->stage >= pdpu->catalog->caps->max_mixer_blendstages) {
@@ -1017,19 +1027,58 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
 
 	max_linewidth = pdpu->catalog->caps->max_linewidth;
 
-	/* check decimated source width */
+	fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
+
 	if (drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) {
-		DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
-				DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
-		return -E2BIG;
-	}
+		/* struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc_state); */
 
-	fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
+		if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
+			DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
+					DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
+			return -E2BIG;
+		}
 
-	ret = dpu_plane_atomic_check_pipe(pdpu, &pstate->pipe, pipe_cfg, fmt);
+		/*
+		 * FIXME: it's not possible to check if sourcesplit is supported,
+		 * LMs is not assigned yet. It happens in dpu_encoder_virt_mode_set
+		 */
+		if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) ||
+			   drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) ||
+			   (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) &&
+			    !test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features)) ||
+			   /* cstate->num_mixers < 2 ||
+			   !test_bit(DPU_MIXER_SOURCESPLIT, &cstate->mixers[0].hw_lm->cap->features) || */
+			   DPU_FORMAT_IS_YUV(fmt)) {
+			DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, can't use split source\n",
+					DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
+			return -E2BIG;
+		}
+
+		/* Use multirect for wide plane. We do not support dynamic assignment of SSPPs, so we know the configuration. */
+		pipe->multirect_index = DPU_SSPP_RECT_0;
+		pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
+
+		r_pipe->sspp = pipe->sspp;
+		r_pipe->multirect_index = DPU_SSPP_RECT_1;
+		r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
+
+		*r_pipe_cfg = *pipe_cfg;
+		pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
+		pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
+		r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
+		r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
+	}
+
+	ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt);
 	if (ret)
 		return ret;
 
+	if (r_pipe->sspp) {
+		ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt);
+		if (ret)
+			return ret;
+	}
+
 	supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0;
 
 	if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION))
@@ -1096,8 +1145,10 @@ void dpu_plane_flush(struct drm_plane *plane)
 	else if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG)
 		/* force 100% alpha */
 		_dpu_plane_color_fill(pdpu, pdpu->color_fill, 0xFF);
-	else
+	else {
 		dpu_plane_flush_csc(pdpu, &pstate->pipe);
+		dpu_plane_flush_csc(pdpu, &pstate->r_pipe);
+	}
 
 	/* flag h/w flush complete */
 	if (plane->state)
@@ -1209,13 +1260,14 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 	struct drm_plane_state *state = plane->state;
 	struct dpu_plane_state *pstate = to_dpu_plane_state(state);
 	struct dpu_sw_pipe *pipe = &pstate->pipe;
+	struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
 	struct drm_crtc *crtc = state->crtc;
 	struct drm_framebuffer *fb = state->fb;
 	bool is_rt_pipe;
 	const struct dpu_format *fmt =
 		to_dpu_format(msm_framebuffer_format(fb));
 	struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
-
+	struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
 	struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
 	struct msm_gem_address_space *aspace = kms->base.aspace;
 	struct dpu_hw_fmt_layout layout;
@@ -1243,6 +1295,12 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 				   drm_mode_vrefresh(&crtc->mode),
 				   layout_valid ? &layout : NULL);
 
+	if (r_pipe->sspp) {
+		dpu_plane_sspp_update_pipe(plane, r_pipe, r_pipe_cfg, fmt,
+					   drm_mode_vrefresh(&crtc->mode),
+					   layout_valid ? &layout : NULL);
+	}
+
 	if (pstate->needs_qos_remap)
 		pstate->needs_qos_remap = false;
 
@@ -1250,16 +1308,31 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 						    &crtc->mode, pipe_cfg);
 
 	pstate->plane_clk = _dpu_plane_calc_clk(&crtc->mode, pipe_cfg);
+
+	if (r_pipe->sspp) {
+		pstate->plane_fetch_bw += _dpu_plane_calc_bw(pdpu->catalog, fmt, &crtc->mode, r_pipe_cfg);
+
+		pstate->plane_clk = max(pstate->plane_clk, _dpu_plane_calc_clk(&crtc->mode, r_pipe_cfg));
+	}
 }
 
 static void _dpu_plane_atomic_disable(struct drm_plane *plane)
 {
 	struct drm_plane_state *state = plane->state;
 	struct dpu_plane_state *pstate = to_dpu_plane_state(state);
+	struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
 
 	trace_dpu_plane_disable(DRMID(plane), false,
 				pstate->pipe.multirect_mode);
 
+	if (r_pipe->sspp) {
+		r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+		r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+
+		if (r_pipe->sspp->ops.setup_multirect)
+			r_pipe->sspp->ops.setup_multirect(r_pipe);
+	}
+
 	pstate->pending = true;
 }
 
@@ -1292,6 +1365,9 @@ static void dpu_plane_destroy(struct drm_plane *plane)
 		pstate = to_dpu_plane_state(plane->state);
 		_dpu_plane_set_qos_ctrl(plane, &pstate->pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
 
+		if (pstate->r_pipe.sspp)
+			_dpu_plane_set_qos_ctrl(plane, &pstate->r_pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
+
 		mutex_destroy(&pdpu->lock);
 
 		/* this will destroy the states as well */
@@ -1372,12 +1448,29 @@ static void dpu_plane_atomic_print_state(struct drm_printer *p,
 		const struct drm_plane_state *state)
 {
 	const struct dpu_plane_state *pstate = to_dpu_plane_state(state);
+	const struct dpu_sw_pipe *pipe = &pstate->pipe;
+	const struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
+	const struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
+	const struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
 
 	drm_printf(p, "\tstage=%d\n", pstate->stage);
-	drm_printf(p, "\tsspp=%s\n", pstate->pipe.sspp->cap->name);
-	drm_printf(p, "\tmultirect_mode=%s\n", dpu_get_multirect_mode(pstate->pipe.multirect_mode));
-	drm_printf(p, "\tmultirect_index=%s\n",
-		   dpu_get_multirect_index(pstate->pipe.multirect_index));
+
+	drm_printf(p, "\tsspp[0]=%s\n", pipe->sspp->cap->name);
+	drm_printf(p, "\tmultirect_mode[0]=%s\n", dpu_get_multirect_mode(pipe->multirect_mode));
+	drm_printf(p, "\tmultirect_index[0]=%s\n",
+		   dpu_get_multirect_index(pipe->multirect_index));
+	drm_printf(p, "\tsrc[0]=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&pipe_cfg->src_rect));
+	drm_printf(p, "\tdst[0]=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&pipe_cfg->dst_rect));
+
+	if (r_pipe->sspp) {
+		drm_printf(p, "\tsspp[1]=%s\n", r_pipe->sspp->cap->name);
+		drm_printf(p, "\tmultirect_mode[1]=%s\n",
+			   dpu_get_multirect_mode(r_pipe->multirect_mode));
+		drm_printf(p, "\tmultirect_index[1]=%s\n",
+			   dpu_get_multirect_index(r_pipe->multirect_index));
+		drm_printf(p, "\tsrc[1]=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&r_pipe_cfg->src_rect));
+		drm_printf(p, "\tdst[1]=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&r_pipe_cfg->dst_rect));
+	}
 }
 
 static void dpu_plane_reset(struct drm_plane *plane)
@@ -1411,6 +1504,10 @@ static void dpu_plane_reset(struct drm_plane *plane)
 	 * This is the place where the state is allocated, so fill it fully.
 	 */
 	pstate->pipe.sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe);
+	pstate->pipe.multirect_index = DPU_SSPP_RECT_SOLO;
+	pstate->pipe.multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+
+	pstate->r_pipe.sspp = NULL;
 
 	__drm_atomic_helper_plane_reset(plane, &pstate->base);
 }
@@ -1427,6 +1524,8 @@ void dpu_plane_danger_signal_ctrl(struct drm_plane *plane, bool enable)
 
 	pm_runtime_get_sync(&dpu_kms->pdev->dev);
 	_dpu_plane_set_qos_ctrl(plane, &pstate->pipe, enable, DPU_PLANE_QOS_PANIC_CTRL);
+	if (pstate->r_pipe.sspp)
+		_dpu_plane_set_qos_ctrl(plane, &pstate->r_pipe, enable, DPU_PLANE_QOS_PANIC_CTRL);
 	pm_runtime_put_sync(&dpu_kms->pdev->dev);
 }
 #endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
index 0ca9002015ff..7490ffd94d03 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
@@ -19,7 +19,9 @@
  * @base:	base drm plane state object
  * @aspace:	pointer to address space for input/output buffers
  * @pipe:	software pipe description
+ * @r_pipe:	software pipe description of the second pipe
  * @pipe_cfg:	software pipe configuration
+ * @r_pipe_cfg:	software pipe configuration for the second pipe
  * @stage:	assigned by crtc blender
  * @needs_qos_remap: qos remap settings need to be updated
  * @multirect_index: index of the rectangle of SSPP
@@ -34,7 +36,9 @@ struct dpu_plane_state {
 	struct drm_plane_state base;
 	struct msm_gem_address_space *aspace;
 	struct dpu_sw_pipe pipe;
+	struct dpu_sw_pipe r_pipe;
 	struct dpu_sw_pipe_cfg pipe_cfg;
+	struct dpu_sw_pipe_cfg r_pipe_cfg;
 	enum dpu_stage stage;
 	bool needs_qos_remap;
 	bool pending;
-- 
2.39.2


  parent reply	other threads:[~2023-03-10  0:57 UTC|newest]

Thread overview: 108+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-10  0:56 [PATCH v5 00/32] drm/msm/dpu: wide planes support Dmitry Baryshkov
2023-03-10  0:56 ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 01/32] drm/msm/dpu: rename struct dpu_hw_pipe(_cfg) to dpu_hw_sspp(_cfg) Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 02/32] drm/msm/dpu: move SSPP allocation to the RM Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 03/32] drm/msm/dpu: move SSPP debugfs creation to dpu_kms.c Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 04/32] drm/msm/dpu: drop EAGAIN check from dpu_format_populate_layout Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 05/32] drm/msm/dpu: move pipe_hw to dpu_plane_state Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 06/32] drm/msm/dpu: drop dpu_plane_pipe function Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 07/32] drm/msm/dpu: introduce struct dpu_sw_pipe Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 08/32] drm/msm/dpu: use dpu_sw_pipe for dpu_hw_sspp callbacks Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 09/32] drm/msm/dpu: pass dpu_format to _dpu_hw_sspp_setup_scaler3() Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 10/32] drm/msm/dpu: clean up SRC addresses when setting up SSPP for solid fill Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 11/32] drm/msm/dpu: move stride programming to dpu_hw_sspp_setup_sourceaddress Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 12/32] drm/msm/dpu: remove dpu_hw_fmt_layout from struct dpu_hw_sspp_cfg Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 13/32] drm/msm/dpu: rename dpu_hw_sspp_cfg to dpu_sw_pipe_cfg Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-14  3:38   ` Abhinav Kumar
2023-03-14  3:38     ` Abhinav Kumar
2023-03-10  0:56 ` [PATCH v5 14/32] drm/msm/dpu: drop src_split and multirect check from dpu_crtc_atomic_check Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 15/32] drm/msm/dpu: don't use unsupported blend stages Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 16/32] drm/msm/dpu: move the rest of plane checks to dpu_plane_atomic_check() Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-14  4:02   ` Abhinav Kumar
2023-03-14  4:02     ` Abhinav Kumar
2023-03-14  4:14     ` Dmitry Baryshkov
2023-03-14  4:14       ` Dmitry Baryshkov
2023-03-14  4:42       ` Abhinav Kumar
2023-03-14  4:42         ` Abhinav Kumar
2023-03-10  0:56 ` [PATCH v5 17/32] drm/msm/dpu: drop redundant plane dst check from dpu_crtc_atomic_check() Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 18/32] drm/msm/dpu: rewrite plane's QoS-related functions to take dpu_sw_pipe and dpu_format Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 19/32] drm/msm/dpu: make _dpu_plane_calc_clk accept mode directly Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 20/32] drm/msm/dpu: add dpu_hw_sspp_cfg to dpu_plane_state Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-14  4:11   ` Abhinav Kumar
2023-03-14  4:11     ` Abhinav Kumar
2023-03-10  0:56 ` [PATCH v5 21/32] drm/msm/dpu: simplify dpu_plane_validate_src() Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-14  4:16   ` Abhinav Kumar
2023-03-14  4:16     ` Abhinav Kumar
2023-03-10  0:56 ` [PATCH v5 22/32] drm/msm/dpu: rework dpu_plane_sspp_atomic_update() Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-14  4:21   ` Abhinav Kumar
2023-03-14  4:21     ` Abhinav Kumar
2023-03-10  0:56 ` [PATCH v5 23/32] drm/msm/dpu: rework dpu_plane_atomic_check() Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-14  4:24   ` Abhinav Kumar
2023-03-14  4:24     ` Abhinav Kumar
2023-03-10  0:56 ` [PATCH v5 24/32] drm/msm/dpu: rework plane CSC setting Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-10  0:56 ` [PATCH v5 25/32] drm/msm/dpu: rework static color fill code Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-14  4:28   ` Abhinav Kumar
2023-03-14  4:28     ` Abhinav Kumar
2023-03-10  0:56 ` [PATCH v5 26/32] drm/msm/dpu: split pipe handling from _dpu_crtc_blend_setup_mixer Dmitry Baryshkov
2023-03-10  0:56   ` Dmitry Baryshkov
2023-03-14  4:30   ` Abhinav Kumar
2023-03-14  4:30     ` Abhinav Kumar
2023-03-10  0:56 ` Dmitry Baryshkov [this message]
2023-03-10  0:56   ` [PATCH v5 27/32] drm/msm/dpu: add support for wide planes Dmitry Baryshkov
2023-03-14  4:40   ` Abhinav Kumar
2023-03-14  4:40     ` Abhinav Kumar
2023-03-10  0:57 ` [PATCH v5 28/32] drm/msm/dpu: populate SmartDMA features in hw catalog Dmitry Baryshkov
2023-03-10  0:57   ` Dmitry Baryshkov
2023-03-14  4:49   ` Abhinav Kumar
2023-03-14  4:49     ` Abhinav Kumar
2023-03-10  0:57 ` [PATCH v5 29/32] drm/msm/dpu: enable SmartDMA for the rest of the platforms Dmitry Baryshkov
2023-03-10  0:57   ` Dmitry Baryshkov
2023-03-14  5:08   ` Abhinav Kumar
2023-03-14  5:08     ` Abhinav Kumar
2023-03-14 10:58     ` Dmitry Baryshkov
2023-03-14 10:58       ` Dmitry Baryshkov
2023-03-14 16:35       ` Abhinav Kumar
2023-03-14 16:35         ` Abhinav Kumar
2023-03-14 16:43         ` Dmitry Baryshkov
2023-03-14 16:43           ` Dmitry Baryshkov
2023-03-14 16:47           ` Abhinav Kumar
2023-03-14 16:47             ` Abhinav Kumar
2023-03-14 17:23             ` Dmitry Baryshkov
2023-03-14 17:23               ` Dmitry Baryshkov
2023-03-10  0:57 ` [PATCH v5 30/32] drm/msm/dpu: drop smart_dma_rev from dpu_caps Dmitry Baryshkov
2023-03-10  0:57   ` Dmitry Baryshkov
2023-03-14  5:12   ` Abhinav Kumar
2023-03-14  5:12     ` Abhinav Kumar
2023-03-10  0:57 ` [PATCH v5 31/32] drm/msm/dpu: log the multirect_index in _dpu_crtc_blend_setup_pipe Dmitry Baryshkov
2023-03-10  0:57   ` Dmitry Baryshkov
2023-03-14  4:44   ` Abhinav Kumar
2023-03-14  4:44     ` Abhinav Kumar
2023-03-10  0:57 ` [PATCH v5 32/32] drm/msm/dpu: remove unused dpu_plane_validate_multirect_v2 function Dmitry Baryshkov
2023-03-10  0:57   ` Dmitry Baryshkov
2023-03-14  4:44   ` Abhinav Kumar
2023-03-14  4:44     ` Abhinav Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230310005704.1332368-28-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=airlied@gmail.com \
    --cc=andersson@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.