From: Aradhya Bhatia <a-bhatia1@ti.com> To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Catalin Marinas <catalin.marinas@arm.com>, Conor Dooley <conor+dt@kernel.org>, Will Deacon <will@kernel.org>, Francesco Dolcini <francesco@dolcini.it> Cc: Devicetree List <devicetree@vger.kernel.org>, Linux Kernel List <linux-kernel@vger.kernel.org>, Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>, Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>, Rahul T R <r-ravikumar@ti.com>, Devarsh Thakkar <devarsht@ti.com>, Jai Luthra <j-luthra@ti.com>, Jayesh Choudhary <j-choudhary@ti.com>, Aradhya Bhatia <a-bhatia1@ti.com> Subject: [PATCH v5 3/6] arm64: dts: ti: k3-am62x-sk-common: Add HDMI support Date: Wed, 9 Aug 2023 14:15:56 +0530 [thread overview] Message-ID: <20230809084559.17322-4-a-bhatia1@ti.com> (raw) In-Reply-To: <20230809084559.17322-1-a-bhatia1@ti.com> The DSS outputs DPI signals via its second video port (VP2). The DPI output from DSS is 24 bits (RGB888) and is forwarded to an HDMI transmitter (SIL9022) on the board. Add pinmux info for DSS DPI output. Add DT nodes for SIL9022 HDMI transmitter (TX), and the HDMI connector on the AM625 SK and AM62-LP SK platforms. Additionally, connect the output of DSS (VP2) with input of the HDMI TX, and the output of HDMI TX to the input of the HDMI connector. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> --- .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 91 +++++++++++++++++++ 1 file changed, 91 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 540ed8a0d7fb..677ff8de4b6e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -114,6 +114,17 @@ sound_master: simple-audio-card,codec { clocks = <&tlv320_mclk>; }; }; + + hdmi0: connector-hdmi { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&sii9022_out>; + }; + }; + }; }; &main_pmx0 { @@ -226,6 +237,39 @@ AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25/J17) GPMC0_WEN.MCASP1_AXR0 */ AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23/K20) GPMC0_ADVN_ALE.MCASP1_AXR2 */ >; }; + + main_dss0_pins_default: main-dss0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */ + AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */ + AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */ + AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */ + AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */ + AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */ + AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */ + AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */ + AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */ + AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */ + AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */ + AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */ + AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */ + AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */ + AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */ + AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */ + AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */ + AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */ + AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */ + AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */ + AM62X_IOPAD(0x05c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */ + AM62X_IOPAD(0x060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */ + AM62X_IOPAD(0x064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */ + AM62X_IOPAD(0x068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */ + AM62X_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */ + AM62X_IOPAD(0x070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */ + AM62X_IOPAD(0x074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */ + AM62X_IOPAD(0x078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */ + >; + }; }; &mcu_pmx0 { @@ -313,6 +357,36 @@ tlv320aic3106: audio-codec@1b { IOVDD-supply = <&vcc_3v3_sys>; DRVDD-supply = <&vcc_3v3_sys>; }; + + sii9022: bridge-hdmi@3b { + compatible = "sil,sii9022"; + reg = <0x3b>; + interrupt-parent = <&exp1>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + #sound-dai-cells = <0>; + sil,i2s-data-lanes = < 0 >; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022_in: endpoint { + remote-endpoint = <&dpi1_out>; + }; + }; + + port@1 { + reg = <1>; + + sii9022_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; }; &sdhci0 { @@ -410,3 +484,20 @@ &mcasp1 { tx-num-evt = <32>; rx-num-evt = <32>; }; + +&dss { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_dss0_pins_default>; +}; + +&dss_ports { + /* VP2: DPI Output */ + port@1 { + reg = <1>; + + dpi1_out: endpoint { + remote-endpoint = <&sii9022_in>; + }; + }; +}; -- 2.40.1
WARNING: multiple messages have this Message-ID (diff)
From: Aradhya Bhatia <a-bhatia1@ti.com> To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Catalin Marinas <catalin.marinas@arm.com>, Conor Dooley <conor+dt@kernel.org>, Will Deacon <will@kernel.org>, Francesco Dolcini <francesco@dolcini.it> Cc: Devicetree List <devicetree@vger.kernel.org>, Linux Kernel List <linux-kernel@vger.kernel.org>, Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>, Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>, Rahul T R <r-ravikumar@ti.com>, Devarsh Thakkar <devarsht@ti.com>, Jai Luthra <j-luthra@ti.com>, Jayesh Choudhary <j-choudhary@ti.com>, Aradhya Bhatia <a-bhatia1@ti.com> Subject: [PATCH v5 3/6] arm64: dts: ti: k3-am62x-sk-common: Add HDMI support Date: Wed, 9 Aug 2023 14:15:56 +0530 [thread overview] Message-ID: <20230809084559.17322-4-a-bhatia1@ti.com> (raw) In-Reply-To: <20230809084559.17322-1-a-bhatia1@ti.com> The DSS outputs DPI signals via its second video port (VP2). The DPI output from DSS is 24 bits (RGB888) and is forwarded to an HDMI transmitter (SIL9022) on the board. Add pinmux info for DSS DPI output. Add DT nodes for SIL9022 HDMI transmitter (TX), and the HDMI connector on the AM625 SK and AM62-LP SK platforms. Additionally, connect the output of DSS (VP2) with input of the HDMI TX, and the output of HDMI TX to the input of the HDMI connector. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> --- .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 91 +++++++++++++++++++ 1 file changed, 91 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 540ed8a0d7fb..677ff8de4b6e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -114,6 +114,17 @@ sound_master: simple-audio-card,codec { clocks = <&tlv320_mclk>; }; }; + + hdmi0: connector-hdmi { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&sii9022_out>; + }; + }; + }; }; &main_pmx0 { @@ -226,6 +237,39 @@ AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25/J17) GPMC0_WEN.MCASP1_AXR0 */ AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23/K20) GPMC0_ADVN_ALE.MCASP1_AXR2 */ >; }; + + main_dss0_pins_default: main-dss0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */ + AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */ + AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */ + AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */ + AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */ + AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */ + AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */ + AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */ + AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */ + AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */ + AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */ + AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */ + AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */ + AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */ + AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */ + AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */ + AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */ + AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */ + AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */ + AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */ + AM62X_IOPAD(0x05c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */ + AM62X_IOPAD(0x060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */ + AM62X_IOPAD(0x064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */ + AM62X_IOPAD(0x068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */ + AM62X_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */ + AM62X_IOPAD(0x070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */ + AM62X_IOPAD(0x074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */ + AM62X_IOPAD(0x078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */ + >; + }; }; &mcu_pmx0 { @@ -313,6 +357,36 @@ tlv320aic3106: audio-codec@1b { IOVDD-supply = <&vcc_3v3_sys>; DRVDD-supply = <&vcc_3v3_sys>; }; + + sii9022: bridge-hdmi@3b { + compatible = "sil,sii9022"; + reg = <0x3b>; + interrupt-parent = <&exp1>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + #sound-dai-cells = <0>; + sil,i2s-data-lanes = < 0 >; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022_in: endpoint { + remote-endpoint = <&dpi1_out>; + }; + }; + + port@1 { + reg = <1>; + + sii9022_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; }; &sdhci0 { @@ -410,3 +484,20 @@ &mcasp1 { tx-num-evt = <32>; rx-num-evt = <32>; }; + +&dss { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_dss0_pins_default>; +}; + +&dss_ports { + /* VP2: DPI Output */ + port@1 { + reg = <1>; + + dpi1_out: endpoint { + remote-endpoint = <&sii9022_in>; + }; + }; +}; -- 2.40.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-08-09 8:46 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-08-09 8:45 [PATCH v5 0/6] arm64: ti: k3-am62: Add display support Aradhya Bhatia 2023-08-09 8:45 ` Aradhya Bhatia 2023-08-09 8:45 ` [PATCH v5 1/6] arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency Aradhya Bhatia 2023-08-09 8:45 ` Aradhya Bhatia 2023-08-09 8:45 ` [PATCH v5 2/6] arm64: dts: ti: k3-am62-main: Add node for DSS Aradhya Bhatia 2023-08-09 8:45 ` Aradhya Bhatia 2023-08-09 8:45 ` Aradhya Bhatia [this message] 2023-08-09 8:45 ` [PATCH v5 3/6] arm64: dts: ti: k3-am62x-sk-common: Add HDMI support Aradhya Bhatia 2023-08-09 8:45 ` [PATCH v5 4/6] arm64: dts: ti: am62x-sk: Add overlay for HDMI audio Aradhya Bhatia 2023-08-09 8:45 ` Aradhya Bhatia 2023-09-08 22:13 ` Rob Herring 2023-09-08 22:13 ` Rob Herring 2023-08-09 8:45 ` [PATCH v5 5/6] arm64: dts: ti: k3-am625-beagleplay: Add HDMI support Aradhya Bhatia 2023-08-09 8:45 ` Aradhya Bhatia 2023-08-09 8:45 ` [PATCH v5 6/6] arm64: defconfig: Enable ITE_IT66121 HDMI transmitter Aradhya Bhatia 2023-08-09 8:45 ` Aradhya Bhatia 2023-08-09 14:40 ` [PATCH v5 0/6] arm64: ti: k3-am62: Add display support Nishanth Menon 2023-08-09 14:40 ` Nishanth Menon 2023-08-09 17:01 ` Andrew Davis 2023-08-09 17:01 ` Andrew Davis 2023-08-09 17:59 ` Nishanth Menon 2023-08-09 17:59 ` Nishanth Menon 2023-08-11 22:32 ` Nishanth Menon 2023-08-11 22:32 ` Nishanth Menon 2023-08-14 10:41 ` Aradhya Bhatia 2023-08-14 10:41 ` Aradhya Bhatia
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230809084559.17322-4-a-bhatia1@ti.com \ --to=a-bhatia1@ti.com \ --cc=catalin.marinas@arm.com \ --cc=conor+dt@kernel.org \ --cc=devarsht@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=francesco@dolcini.it \ --cc=j-choudhary@ti.com \ --cc=j-luthra@ti.com \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=r-ravikumar@ti.com \ --cc=robh+dt@kernel.org \ --cc=tomi.valkeinen@ideasonboard.com \ --cc=vigneshr@ti.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.